From 9865853851313e0d94a4acde42d6f9d8070bb376 Mon Sep 17 00:00:00 2001 From: Li Yang Date: Tue, 3 Oct 2006 23:10:46 -0500 Subject: [POWERPC] Add QUICC Engine (QE) infrastructure Add QUICC Engine (QE) configuration, header files, and QE management and library code that are used by QE devices drivers. Includes Leo's modifications up to, and including, the platform_device to of_device adaptation: "The series of patches add generic QE infrastructure called qe_lib, and MPC8360EMDS board support. Qe_lib is used by QE device drivers such as ucc_geth driver. This version updates QE interrupt controller to use new irq mapping mechanism, addresses all the comments received with last submission and includes some style fixes. v2: Change to use device tree for BCSR and MURAM; Remove I/O port interrupt handling code as it is not generic enough. v3: Address comments from Kumar; Update definition of several device tree nodes; Copyright style change." In addition, the following changes have been made: o removed typedefs o uint -> u32 conversions o removed following defines: QE_SIZEOF_BD, BD_BUFFER_ARG, BD_BUFFER_CLEAR, BD_BUFFER, BD_STATUS_AND_LENGTH_SET, BD_STATUS_AND_LENGTH, and BD_BUFFER_SET because they hid sizeof/in_be32/out_be32 operations from the reader. o fixed qe_snums_init() serial num assignment to use a const array o made CONFIG_UCC_FAST select UCC_SLOW o reduced NR_QE_IC_INTS from 128 to 64 o remove _IO_BASE, etc. defines (not used) o removed irrelevant comments, added others to resemble removed BD_ defines o realigned struct definitions in headers o various other style fixes including things like pinMask -> pin_mask o fixed a ton of whitespace issues o marked ioregs as __be32/__be16 o removed platform_device code and redundant get_qe_base() o removed redundant comments o added cpu_relax() to qe_reset o uncasted all get_property() assignments o eliminated unneeded casts o eliminated immrbar_phys_to_virt (not used) Signed-off-by: Li Yang Signed-off-by: Shlomi Gridish Signed-off-by: Kim Phillips Signed-off-by: Paul Mackerras --- arch/powerpc/sysdev/Makefile | 1 + arch/powerpc/sysdev/qe_lib/Kconfig | 30 ++ arch/powerpc/sysdev/qe_lib/Makefile | 8 + arch/powerpc/sysdev/qe_lib/qe.c | 353 +++++++++++++++++++++ arch/powerpc/sysdev/qe_lib/qe_ic.c | 555 ++++++++++++++++++++++++++++++++++ arch/powerpc/sysdev/qe_lib/qe_ic.h | 106 +++++++ arch/powerpc/sysdev/qe_lib/qe_io.c | 226 ++++++++++++++ arch/powerpc/sysdev/qe_lib/ucc.c | 251 +++++++++++++++ arch/powerpc/sysdev/qe_lib/ucc_fast.c | 396 ++++++++++++++++++++++++ arch/powerpc/sysdev/qe_lib/ucc_slow.c | 404 +++++++++++++++++++++++++ 10 files changed, 2330 insertions(+) create mode 100644 arch/powerpc/sysdev/qe_lib/Kconfig create mode 100644 arch/powerpc/sysdev/qe_lib/Makefile create mode 100644 arch/powerpc/sysdev/qe_lib/qe.c create mode 100644 arch/powerpc/sysdev/qe_lib/qe_ic.c create mode 100644 arch/powerpc/sysdev/qe_lib/qe_ic.h create mode 100644 arch/powerpc/sysdev/qe_lib/qe_io.c create mode 100644 arch/powerpc/sysdev/qe_lib/ucc.c create mode 100644 arch/powerpc/sysdev/qe_lib/ucc_fast.c create mode 100644 arch/powerpc/sysdev/qe_lib/ucc_slow.c (limited to 'arch/powerpc/sysdev') diff --git a/arch/powerpc/sysdev/Makefile b/arch/powerpc/sysdev/Makefile index f15f4d78aee..91f052d8cce 100644 --- a/arch/powerpc/sysdev/Makefile +++ b/arch/powerpc/sysdev/Makefile @@ -12,6 +12,7 @@ obj-$(CONFIG_MMIO_NVRAM) += mmio_nvram.o obj-$(CONFIG_FSL_SOC) += fsl_soc.o obj-$(CONFIG_PPC_TODC) += todc.o obj-$(CONFIG_TSI108_BRIDGE) += tsi108_pci.o tsi108_dev.o +obj-$(CONFIG_QUICC_ENGINE) += qe_lib/ ifeq ($(CONFIG_PPC_MERGE),y) obj-$(CONFIG_PPC_I8259) += i8259.o diff --git a/arch/powerpc/sysdev/qe_lib/Kconfig b/arch/powerpc/sysdev/qe_lib/Kconfig new file mode 100644 index 00000000000..a725e80befa --- /dev/null +++ b/arch/powerpc/sysdev/qe_lib/Kconfig @@ -0,0 +1,30 @@ +# +# QE Communication options +# + +menu "QE Options" + depends on QUICC_ENGINE + +config UCC_SLOW + bool "UCC Slow Protocols Support" + default n + select UCC + help + This option provides qe_lib support to UCC slow + protocols: UART, BISYNC, QMC + +config UCC_FAST + bool "UCC Fast Protocols Support" + default n + select UCC + select UCC_SLOW + help + This option provides qe_lib support to UCC fast + protocols: HDLC, Ethernet, ATM, transparent + +config UCC + bool + default y if UCC_FAST || UCC_SLOW + +endmenu + diff --git a/arch/powerpc/sysdev/qe_lib/Makefile b/arch/powerpc/sysdev/qe_lib/Makefile new file mode 100644 index 00000000000..874fe1a5b1c --- /dev/null +++ b/arch/powerpc/sysdev/qe_lib/Makefile @@ -0,0 +1,8 @@ +# +# Makefile for the linux ppc-specific parts of QE +# +obj-$(CONFIG_QUICC_ENGINE)+= qe.o qe_ic.o qe_io.o + +obj-$(CONFIG_UCC) += ucc.o +obj-$(CONFIG_UCC_SLOW) += ucc_slow.o +obj-$(CONFIG_UCC_FAST) += ucc_fast.o diff --git a/arch/powerpc/sysdev/qe_lib/qe.c b/arch/powerpc/sysdev/qe_lib/qe.c new file mode 100644 index 00000000000..2bae632d3ad --- /dev/null +++ b/arch/powerpc/sysdev/qe_lib/qe.c @@ -0,0 +1,353 @@ +/* + * Copyright (C) 2006 Freescale Semicondutor, Inc. All rights reserved. + * + * Authors: Shlomi Gridish + * Li Yang + * Based on cpm2_common.c from Dan Malek (dmalek@jlc.net) + * + * Description: + * General Purpose functions for the global management of the + * QUICC Engine (QE). + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +static void qe_snums_init(void); +static void qe_muram_init(void); +static int qe_sdma_init(void); + +static DEFINE_SPINLOCK(qe_lock); + +/* QE snum state */ +enum qe_snum_state { + QE_SNUM_STATE_USED, + QE_SNUM_STATE_FREE +}; + +/* QE snum */ +struct qe_snum { + u8 num; + enum qe_snum_state state; +}; + +/* We allocate this here because it is used almost exclusively for + * the communication processor devices. + */ +struct qe_immap *qe_immr = NULL; +EXPORT_SYMBOL(qe_immr); + +static struct qe_snum snums[QE_NUM_OF_SNUM]; /* Dynamically allocated SNUMs */ + +static phys_addr_t qebase = -1; + +phys_addr_t get_qe_base(void) +{ + struct device_node *qe; + + if (qebase != -1) + return qebase; + + qe = of_find_node_by_type(NULL, "qe"); + if (qe) { + unsigned int size; + const void *prop = get_property(qe, "reg", &size); + qebase = of_translate_address(qe, prop); + of_node_put(qe); + }; + + return qebase; +} + +EXPORT_SYMBOL(get_qe_base); + +void qe_reset(void) +{ + if (qe_immr == NULL) + qe_immr = ioremap(get_qe_base(), QE_IMMAP_SIZE); + + qe_snums_init(); + + qe_issue_cmd(QE_RESET, QE_CR_SUBBLOCK_INVALID, + QE_CR_PROTOCOL_UNSPECIFIED, 0); + + /* Reclaim the MURAM memory for our use. */ + qe_muram_init(); + + if (qe_sdma_init()) + panic("sdma init failed!"); +} + +int qe_issue_cmd(u32 cmd, u32 device, u8 mcn_protocol, u32 cmd_input) +{ + unsigned long flags; + u8 mcn_shift = 0, dev_shift = 0; + + spin_lock_irqsave(&qe_lock, flags); + if (cmd == QE_RESET) { + out_be32(&qe_immr->cp.cecr, (u32) (cmd | QE_CR_FLG)); + } else { + if (cmd == QE_ASSIGN_PAGE) { + /* Here device is the SNUM, not sub-block */ + dev_shift = QE_CR_SNUM_SHIFT; + } else if (cmd == QE_ASSIGN_RISC) { + /* Here device is the SNUM, and mcnProtocol is + * e_QeCmdRiscAssignment value */ + dev_shift = QE_CR_SNUM_SHIFT; + mcn_shift = QE_CR_MCN_RISC_ASSIGN_SHIFT; + } else { + if (device == QE_CR_SUBBLOCK_USB) + mcn_shift = QE_CR_MCN_USB_SHIFT; + else + mcn_shift = QE_CR_MCN_NORMAL_SHIFT; + } + + out_be32(&qe_immr->cp.cecdr, + immrbar_virt_to_phys((void *)cmd_input)); + out_be32(&qe_immr->cp.cecr, + (cmd | QE_CR_FLG | ((u32) device << dev_shift) | (u32) + mcn_protocol << mcn_shift)); + } + + /* wait for the QE_CR_FLG to clear */ + while(in_be32(&qe_immr->cp.cecr) & QE_CR_FLG) + cpu_relax(); + spin_unlock_irqrestore(&qe_lock, flags); + + return 0; +} +EXPORT_SYMBOL(qe_issue_cmd); + +/* Set a baud rate generator. This needs lots of work. There are + * 16 BRGs, which can be connected to the QE channels or output + * as clocks. The BRGs are in two different block of internal + * memory mapped space. + * The baud rate clock is the system clock divided by something. + * It was set up long ago during the initial boot phase and is + * is given to us. + * Baud rate clocks are zero-based in the driver code (as that maps + * to port numbers). Documentation uses 1-based numbering. + */ +static unsigned int brg_clk = 0; + +unsigned int get_brg_clk(void) +{ + struct device_node *qe; + if (brg_clk) + return brg_clk; + + qe = of_find_node_by_type(NULL, "qe"); + if (qe) { + unsigned int size; + const u32 *prop = get_property(qe, "brg-frequency", &size); + brg_clk = *prop; + of_node_put(qe); + }; + return brg_clk; +} + +/* This function is used by UARTS, or anything else that uses a 16x + * oversampled clock. + */ +void qe_setbrg(u32 brg, u32 rate) +{ + volatile u32 *bp; + u32 divisor, tempval; + int div16 = 0; + + bp = &qe_immr->brg.brgc1; + bp += brg; + + divisor = (get_brg_clk() / rate); + if (divisor > QE_BRGC_DIVISOR_MAX + 1) { + div16 = 1; + divisor /= 16; + } + + tempval = ((divisor - 1) << QE_BRGC_DIVISOR_SHIFT) | QE_BRGC_ENABLE; + if (div16) + tempval |= QE_BRGC_DIV16; + + out_be32(bp, tempval); +} + +/* Initialize SNUMs (thread serial numbers) according to + * QE Module Control chapter, SNUM table + */ +static void qe_snums_init(void) +{ + int i; + static const u8 snum_init[] = { + 0x04, 0x05, 0x0C, 0x0D, 0x14, 0x15, 0x1C, 0x1D, + 0x24, 0x25, 0x2C, 0x2D, 0x34, 0x35, 0x88, 0x89, + 0x98, 0x99, 0xA8, 0xA9, 0xB8, 0xB9, 0xC8, 0xC9, + 0xD8, 0xD9, 0xE8, 0xE9, + }; + + for (i = 0; i < QE_NUM_OF_SNUM; i++) { + snums[i].num = snum_init[i]; + snums[i].state = QE_SNUM_STATE_FREE; + } +} + +int qe_get_snum(void) +{ + unsigned long flags; + int snum = -EBUSY; + int i; + + spin_lock_irqsave(&qe_lock, flags); + for (i = 0; i < QE_NUM_OF_SNUM; i++) { + if (snums[i].state == QE_SNUM_STATE_FREE) { + snums[i].state = QE_SNUM_STATE_USED; + snum = snums[i].num; + break; + } + } + spin_unlock_irqrestore(&qe_lock, flags); + + return snum; +} +EXPORT_SYMBOL(qe_get_snum); + +void qe_put_snum(u8 snum) +{ + int i; + + for (i = 0; i < QE_NUM_OF_SNUM; i++) { + if (snums[i].num == snum) { + snums[i].state = QE_SNUM_STATE_FREE; + break; + } + } +} +EXPORT_SYMBOL(qe_put_snum); + +static int qe_sdma_init(void) +{ + struct sdma *sdma = &qe_immr->sdma; + u32 sdma_buf_offset; + + if (!sdma) + return -ENODEV; + + /* allocate 2 internal temporary buffers (512 bytes size each) for + * the SDMA */ + sdma_buf_offset = qe_muram_alloc(512 * 2, 64); + if (IS_MURAM_ERR(sdma_buf_offset)) + return -ENOMEM; + + out_be32(&sdma->sdebcr, sdma_buf_offset & QE_SDEBCR_BA_MASK); + out_be32(&sdma->sdmr, (QE_SDMR_GLB_1_MSK | (0x1 >> + QE_SDMR_CEN_SHIFT))); + + return 0; +} + +/* + * muram_alloc / muram_free bits. + */ +static DEFINE_SPINLOCK(qe_muram_lock); + +/* 16 blocks should be enough to satisfy all requests + * until the memory subsystem goes up... */ +static rh_block_t qe_boot_muram_rh_block[16]; +static rh_info_t qe_muram_info; + +static void qe_muram_init(void) +{ + struct device_node *np; + u32 address; + u64 size; + unsigned int flags; + + /* initialize the info header */ + rh_init(&qe_muram_info, 1, + sizeof(qe_boot_muram_rh_block) / + sizeof(qe_boot_muram_rh_block[0]), qe_boot_muram_rh_block); + + /* Attach the usable muram area */ + /* XXX: This is a subset of the available muram. It + * varies with the processor and the microcode patches activated. + */ + if ((np = of_find_node_by_name(NULL, "data-only")) != NULL) { + address = *of_get_address(np, 0, &size, &flags); + of_node_put(np); + rh_attach_region(&qe_muram_info, + (void *)address, (int)size); + } +} + +/* This function returns an index into the MURAM area. + */ +u32 qe_muram_alloc(u32 size, u32 align) +{ + void *start; + unsigned long flags; + + spin_lock_irqsave(&qe_muram_lock, flags); + start = rh_alloc_align(&qe_muram_info, size, align, "QE"); + spin_unlock_irqrestore(&qe_muram_lock, flags); + + return (u32) start; +} +EXPORT_SYMBOL(qe_muram_alloc); + +int qe_muram_free(u32 offset) +{ + int ret; + unsigned long flags; + + spin_lock_irqsave(&qe_muram_lock, flags); + ret = rh_free(&qe_muram_info, (void *)offset); + spin_unlock_irqrestore(&qe_muram_lock, flags); + + return ret; +} +EXPORT_SYMBOL(qe_muram_free); + +/* not sure if this is ever needed */ +u32 qe_muram_alloc_fixed(u32 offset, u32 size) +{ + void *start; + unsigned long flags; + + spin_lock_irqsave(&qe_muram_lock, flags); + start = rh_alloc_fixed(&qe_muram_info, (void *)offset, size, "commproc"); + spin_unlock_irqrestore(&qe_muram_lock, flags); + + return (u32) start; +} +EXPORT_SYMBOL(qe_muram_alloc_fixed); + +void qe_muram_dump(void) +{ + rh_dump(&qe_muram_info); +} +EXPORT_SYMBOL(qe_muram_dump); + +void *qe_muram_addr(u32 offset) +{ + return (void *)&qe_immr->muram[offset]; +} +EXPORT_SYMBOL(qe_muram_addr); diff --git a/arch/powerpc/sysdev/qe_lib/qe_ic.c b/arch/powerpc/sysdev/qe_lib/qe_ic.c new file mode 100644 index 00000000000..c229d07d495 --- /dev/null +++ b/arch/powerpc/sysdev/qe_lib/qe_ic.c @@ -0,0 +1,555 @@ +/* + * arch/powerpc/sysdev/qe_lib/qe_ic.c + * + * Copyright (C) 2006 Freescale Semicondutor, Inc. All rights reserved. + * + * Author: Li Yang + * Based on code from Shlomi Gridish + * + * QUICC ENGINE Interrupt Controller + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "qe_ic.h" + +static DEFINE_SPINLOCK(qe_ic_lock); + +static struct qe_ic_info qe_ic_info[] = { + [1] = { + .mask = 0x00008000, + .mask_reg = QEIC_CIMR, + .pri_code = 0, + .pri_reg = QEIC_CIPWCC, + }, + [2] = { + .mask = 0x00004000, + .mask_reg = QEIC_CIMR, + .pri_code = 1, + .pri_reg = QEIC_CIPWCC, + }, + [3] = { + .mask = 0x00002000, + .mask_reg = QEIC_CIMR, + .pri_code = 2, + .pri_reg = QEIC_CIPWCC, + }, + [10] = { + .mask = 0x00000040, + .mask_reg = QEIC_CIMR, + .pri_code = 1, + .pri_reg = QEIC_CIPZCC, + }, + [11] = { + .mask = 0x00000020, + .mask_reg = QEIC_CIMR, + .pri_code = 2, + .pri_reg = QEIC_CIPZCC, + }, + [12] = { + .mask = 0x00000010, + .mask_reg = QEIC_CIMR, + .pri_code = 3, + .pri_reg = QEIC_CIPZCC, + }, + [13] = { + .mask = 0x00000008, + .mask_reg = QEIC_CIMR, + .pri_code = 4, + .pri_reg = QEIC_CIPZCC, + }, + [14] = { + .mask = 0x00000004, + .mask_reg = QEIC_CIMR, + .pri_code = 5, + .pri_reg = QEIC_CIPZCC, + }, + [15] = { + .mask = 0x00000002, + .mask_reg = QEIC_CIMR, + .pri_code = 6, + .pri_reg = QEIC_CIPZCC, + }, + [20] = { + .mask = 0x10000000, + .mask_reg = QEIC_CRIMR, + .pri_code = 3, + .pri_reg = QEIC_CIPRTA, + }, + [25] = { + .mask = 0x00800000, + .mask_reg = QEIC_CRIMR, + .pri_code = 0, + .pri_reg = QEIC_CIPRTB, + }, + [26] = { + .mask = 0x00400000, + .mask_reg = QEIC_CRIMR, + .pri_code = 1, + .pri_reg = QEIC_CIPRTB, + }, + [27] = { + .mask = 0x00200000, + .mask_reg = QEIC_CRIMR, + .pri_code = 2, + .pri_reg = QEIC_CIPRTB, + }, + [28] = { + .mask = 0x00100000, + .mask_reg = QEIC_CRIMR, + .pri_code = 3, + .pri_reg = QEIC_CIPRTB, + }, + [32] = { + .mask = 0x80000000, + .mask_reg = QEIC_CIMR, + .pri_code = 0, + .pri_reg = QEIC_CIPXCC, + }, + [33] = { + .mask = 0x40000000, + .mask_reg = QEIC_CIMR, + .pri_code = 1, + .pri_reg = QEIC_CIPXCC, + }, + [34] = { + .mask = 0x20000000, + .mask_reg = QEIC_CIMR, + .pri_code = 2, + .pri_reg = QEIC_CIPXCC, + }, + [35] = { + .mask = 0x10000000, + .mask_reg = QEIC_CIMR, + .pri_code = 3, + .pri_reg = QEIC_CIPXCC, + }, + [36] = { + .mask = 0x08000000, + .mask_reg = QEIC_CIMR, + .pri_code = 4, + .pri_reg = QEIC_CIPXCC, + }, + [40] = { + .mask = 0x00800000, + .mask_reg = QEIC_CIMR, + .pri_code = 0, + .pri_reg = QEIC_CIPYCC, + }, + [41] = { + .mask = 0x00400000, + .mask_reg = QEIC_CIMR, + .pri_code = 1, + .pri_reg = QEIC_CIPYCC, + }, + [42] = { + .mask = 0x00200000, + .mask_reg = QEIC_CIMR, + .pri_code = 2, + .pri_reg = QEIC_CIPYCC, + }, + [43] = { + .mask = 0x00100000, + .mask_reg = QEIC_CIMR, + .pri_code = 3, + .pri_reg = QEIC_CIPYCC, + }, +}; + +static inline u32 qe_ic_read(volatile __be32 __iomem * base, unsigned int reg) +{ + return in_be32(base + (reg >> 2)); +} + +static inline void qe_ic_write(volatile __be32 __iomem * base, unsigned int reg, + u32 value) +{ + out_be32(base + (reg >> 2), value); +} + +static inline struct qe_ic *qe_ic_from_irq(unsigned int virq) +{ + return irq_desc[virq].chip_data; +} + +#define virq_to_hw(virq) ((unsigned int)irq_map[virq].hwirq) + +static void qe_ic_unmask_irq(unsigned int virq) +{ + struct qe_ic *qe_ic = qe_ic_from_irq(virq); + unsigned int src = virq_to_hw(virq); + unsigned long flags; + u32 temp; + + spin_lock_irqsave(&qe_ic_lock, flags); + + temp = qe_ic_read(qe_ic->regs, qe_ic_info[src].mask_reg); + qe_ic_write(qe_ic->regs, qe_ic_info[src].mask_reg, + temp | qe_ic_info[src].mask); + + spin_unlock_irqrestore(&qe_ic_lock, flags); +} + +static void qe_ic_mask_irq(unsigned int virq) +{ + struct qe_ic *qe_ic = qe_ic_from_irq(virq); + unsigned int src = virq_to_hw(virq); + unsigned long flags; + u32 temp; + + spin_lock_irqsave(&qe_ic_lock, flags); + + temp = qe_ic_read(qe_ic->regs, qe_ic_info[src].mask_reg); + qe_ic_write(qe_ic->regs, qe_ic_info[src].mask_reg, + temp & ~qe_ic_info[src].mask); + + spin_unlock_irqrestore(&qe_ic_lock, flags); +} + +static void qe_ic_mask_irq_and_ack(unsigned int virq) +{ + struct qe_ic *qe_ic = qe_ic_from_irq(virq); + unsigned int src = virq_to_hw(virq); + unsigned long flags; + u32 temp; + + spin_lock_irqsave(&qe_ic_lock, flags); + + temp = qe_ic_read(qe_ic->regs, qe_ic_info[src].mask_reg); + qe_ic_write(qe_ic->regs, qe_ic_info[src].mask_reg, + temp & ~qe_ic_info[src].mask); + + /* There is nothing to do for ack here, ack is handled in ISR */ + + spin_unlock_irqrestore(&qe_ic_lock, flags); +} + +static struct irq_chip qe_ic_irq_chip = { + .typename = " QEIC ", + .unmask = qe_ic_unmask_irq, + .mask = qe_ic_mask_irq, + .mask_ack = qe_ic_mask_irq_and_ack, +}; + +static int qe_ic_host_match(struct irq_host *h, struct device_node *node) +{ + struct qe_ic *qe_ic = h->host_data; + + /* Exact match, unless qe_ic node is NULL */ + return qe_ic->of_node == NULL || qe_ic->of_node == node; +} + +static int qe_ic_host_map(struct irq_host *h, unsigned int virq, + irq_hw_number_t hw) +{ + struct qe_ic *qe_ic = h->host_data; + struct irq_chip *chip; + + if (qe_ic_info[hw].mask == 0) { + printk(KERN_ERR "Can't map reserved IRQ \n"); + return -EINVAL; + } + /* Default chip */ + chip = &qe_ic->hc_irq; + + set_irq_chip_data(virq, qe_ic); + get_irq_desc(virq)->status |= IRQ_LEVEL; + + set_irq_chip_and_handler(virq, chip, handle_level_irq); + + return 0; +} + +static int qe_ic_host_xlate(struct irq_host *h, struct device_node *ct, + u32 * intspec, unsigned int intsize, + irq_hw_number_t * out_hwirq, + unsigned int *out_flags) +{ + *out_hwirq = intspec[0]; + if (intsize > 1) + *out_flags = intspec[1]; + else + *out_flags = IRQ_TYPE_NONE; + return 0; +} + +static struct irq_host_ops qe_ic_host_ops = { + .match = qe_ic_host_match, + .map = qe_ic_host_map, + .xlate = qe_ic_host_xlate, +}; + +/* Return an interrupt vector or NO_IRQ if no interrupt is pending. */ +unsigned int qe_ic_get_low_irq(struct qe_ic *qe_ic, struct pt_regs *regs) +{ + int irq; + + BUG_ON(qe_ic == NULL); + + /* get the interrupt source vector. */ + irq = qe_ic_read(qe_ic->regs, QEIC_CIVEC) >> 26; + + if (irq == 0) + return NO_IRQ; + + return irq_linear_revmap(qe_ic->irqhost, irq); +} + +/* Return an interrupt vector or NO_IRQ if no interrupt is pending. */ +unsigned int qe_ic_get_high_irq(struct qe_ic *qe_ic, struct pt_regs *regs) +{ + int irq; + + BUG_ON(qe_ic == NULL); + + /* get the interrupt source vector. */ + irq = qe_ic_read(qe_ic->regs, QEIC_CHIVEC) >> 26; + + if (irq == 0) + return NO_IRQ; + + return irq_linear_revmap(qe_ic->irqhost, irq); +} + +/* FIXME: We mask all the QE Low interrupts while handling. We should + * let other interrupt come in, but BAD interrupts are generated */ +void fastcall qe_ic_cascade_low(unsigned int irq, struct irq_desc *desc, + struct pt_regs *regs) +{ + struct qe_ic *qe_ic = desc->handler_data; + struct irq_chip *chip = irq_desc[irq].chip; + + unsigned int cascade_irq = qe_ic_get_low_irq(qe_ic, regs); + + chip->mask_ack(irq); + if (cascade_irq != NO_IRQ) + generic_handle_irq(cascade_irq, regs); + chip->unmask(irq); +} + +/* FIXME: We mask all the QE High interrupts while handling. We should + * let other interrupt come in, but BAD interrupts are generated */ +void fastcall qe_ic_cascade_high(unsigned int irq, struct irq_desc *desc, + struct pt_regs *regs) +{ + struct qe_ic *qe_ic = desc->handler_data; + struct irq_chip *chip = irq_desc[irq].chip; + + unsigned int cascade_irq = qe_ic_get_high_irq(qe_ic, regs); + + chip->mask_ack(irq); + if (cascade_irq != NO_IRQ) + generic_handle_irq(cascade_irq, regs); + chip->unmask(irq); +} + +void __init qe_ic_init(struct device_node *node, unsigned int flags) +{ + struct qe_ic *qe_ic; + struct resource res; + u32 temp = 0, ret, high_active = 0; + + qe_ic = alloc_bootmem(sizeof(struct qe_ic)); + if (qe_ic == NULL) + return; + + memset(qe_ic, 0, sizeof(struct qe_ic)); + qe_ic->of_node = node ? of_node_get(node) : NULL; + + qe_ic->irqhost = irq_alloc_host(IRQ_HOST_MAP_LINEAR, + NR_QE_IC_INTS, &qe_ic_host_ops, 0); + if (qe_ic->irqhost == NULL) { + of_node_put(node); + return; + } + + ret = of_address_to_resource(node, 0, &res); + if (ret) + return; + + qe_ic->regs = ioremap(res.start, res.end - res.start + 1); + + qe_ic->irqhost->host_data = qe_ic; + qe_ic->hc_irq = qe_ic_irq_chip; + + qe_ic->virq_high = irq_of_parse_and_map(node, 0); + qe_ic->virq_low = irq_of_parse_and_map(node, 1); + + if (qe_ic->virq_low == NO_IRQ) { + printk(KERN_ERR "Failed to map QE_IC low IRQ\n"); + return; + } + + /* default priority scheme is grouped. If spread mode is */ + /* required, configure cicr accordingly. */ + if (flags & QE_IC_SPREADMODE_GRP_W) + temp |= CICR_GWCC; + if (flags & QE_IC_SPREADMODE_GRP_X) + temp |= CICR_GXCC; + if (flags & QE_IC_SPREADMODE_GRP_Y) + temp |= CICR_GYCC; + if (flags & QE_IC_SPREADMODE_GRP_Z) + temp |= CICR_GZCC; + if (flags & QE_IC_SPREADMODE_GRP_RISCA) + temp |= CICR_GRTA; + if (flags & QE_IC_SPREADMODE_GRP_RISCB) + temp |= CICR_GRTB; + + /* choose destination signal for highest priority interrupt */ + if (flags & QE_IC_HIGH_SIGNAL) { + temp |= (SIGNAL_HIGH << CICR_HPIT_SHIFT); + high_active = 1; + } + + qe_ic_write(qe_ic->regs, QEIC_CICR, temp); + + set_irq_data(qe_ic->virq_low, qe_ic); + set_irq_chained_handler(qe_ic->virq_low, qe_ic_cascade_low); + + if (qe_ic->virq_high != NO_IRQ) { + set_irq_data(qe_ic->virq_high, qe_ic); + set_irq_chained_handler(qe_ic->virq_high, qe_ic_cascade_high); + } + + printk("QEIC (%d IRQ sources) at %p\n", NR_QE_IC_INTS, qe_ic->regs); +} + +void qe_ic_set_highest_priority(unsigned int virq, int high) +{ + struct qe_ic *qe_ic = qe_ic_from_irq(virq); + unsigned int src = virq_to_hw(virq); + u32 temp = 0; + + temp = qe_ic_read(qe_ic->regs, QEIC_CICR); + + temp &= ~CICR_HP_MASK; + temp |= src << CICR_HP_SHIFT; + + temp &= ~CICR_HPIT_MASK; + temp |= (high ? SIGNAL_HIGH : SIGNAL_LOW) << CICR_HPIT_SHIFT; + + qe_ic_write(qe_ic->regs, QEIC_CICR, temp); +} + +/* Set Priority level within its group, from 1 to 8 */ +int qe_ic_set_priority(unsigned int virq, unsigned int priority) +{ + struct qe_ic *qe_ic = qe_ic_from_irq(virq); + unsigned int src = virq_to_hw(virq); + u32 temp; + + if (priority > 8 || priority == 0) + return -EINVAL; + if (src > 127) + return -EINVAL; + if (qe_ic_info[src].pri_reg == 0) + return -EINVAL; + + temp = qe_ic_read(qe_ic->regs, qe_ic_info[src].pri_reg); + + if (priority < 4) { + temp &= ~(0x7 << (32 - priority * 3)); + temp |= qe_ic_info[src].pri_code << (32 - priority * 3); + } else { + temp &= ~(0x7 << (24 - priority * 3)); + temp |= qe_ic_info[src].pri_code << (24 - priority * 3); + } + + qe_ic_write(qe_ic->regs, qe_ic_info[src].pri_reg, temp); + + return 0; +} + +/* Set a QE priority to use high irq, only priority 1~2 can use high irq */ +int qe_ic_set_high_priority(unsigned int virq, unsigned int priority, int high) +{ + struct qe_ic *qe_ic = qe_ic_from_irq(virq); + unsigned int src = virq_to_hw(virq); + u32 temp, control_reg = QEIC_CICNR, shift = 0; + + if (priority > 2 || priority == 0) + return -EINVAL; + + switch (qe_ic_info[src].pri_reg) { + case QEIC_CIPZCC: + shift = CICNR_ZCC1T_SHIFT; + break; + case QEIC_CIPWCC: + shift = CICNR_WCC1T_SHIFT; + break; + case QEIC_CIPYCC: + shift = CICNR_YCC1T_SHIFT; + break; + case QEIC_CIPXCC: + shift = CICNR_XCC1T_SHIFT; + break; + case QEIC_CIPRTA: + shift = CRICR_RTA1T_SHIFT; + control_reg = QEIC_CRICR; + break; + case QEIC_CIPRTB: + shift = CRICR_RTB1T_SHIFT; + control_reg = QEIC_CRICR; + break; + default: + return -EINVAL; + } + + shift += (2 - priority) * 2; + temp = qe_ic_read(qe_ic->regs, control_reg); + temp &= ~(SIGNAL_MASK << shift); + temp |= (high ? SIGNAL_HIGH : SIGNAL_LOW) << shift; + qe_ic_write(qe_ic->regs, control_reg, temp); + + return 0; +} + +static struct sysdev_class qe_ic_sysclass = { + set_kset_name("qe_ic"), +}; + +static struct sys_device device_qe_ic = { + .id = 0, + .cls = &qe_ic_sysclass, +}; + +static int __init init_qe_ic_sysfs(void) +{ + int rc; + + printk(KERN_DEBUG "Registering qe_ic with sysfs...\n"); + + rc = sysdev_class_register(&qe_ic_sysclass); + if (rc) { + printk(KERN_ERR "Failed registering qe_ic sys class\n"); + return -ENODEV; + } + rc = sysdev_register(&device_qe_ic); + if (rc) { + printk(KERN_ERR "Failed registering qe_ic sys device\n"); + return -ENODEV; + } + return 0; +} + +subsys_initcall(init_qe_ic_sysfs); diff --git a/arch/powerpc/sysdev/qe_lib/qe_ic.h b/arch/powerpc/sysdev/qe_lib/qe_ic.h new file mode 100644 index 00000000000..9a631adb189 --- /dev/null +++ b/arch/powerpc/sysdev/qe_lib/qe_ic.h @@ -0,0 +1,106 @@ +/* + * arch/powerpc/sysdev/qe_lib/qe_ic.h + * + * QUICC ENGINE Interrupt Controller Header + * + * Copyright (C) 2006 Freescale Semicondutor, Inc. All rights reserved. + * + * Author: Li Yang + * Based on code from Shlomi Gridish + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ +#ifndef _POWERPC_SYSDEV_QE_IC_H +#define _POWERPC_SYSDEV_QE_IC_H + +#include + +#define NR_QE_IC_INTS 64 + +/* QE IC registers offset */ +#define QEIC_CICR 0x00 +#define QEIC_CIVEC 0x04 +#define QEIC_CRIPNR 0x08 +#define QEIC_CIPNR 0x0c +#define QEIC_CIPXCC 0x10 +#define QEIC_CIPYCC 0x14 +#define QEIC_CIPWCC 0x18 +#define QEIC_CIPZCC 0x1c +#define QEIC_CIMR 0x20 +#define QEIC_CRIMR 0x24 +#define QEIC_CICNR 0x28 +#define QEIC_CIPRTA 0x30 +#define QEIC_CIPRTB 0x34 +#define QEIC_CRICR 0x3c +#define QEIC_CHIVEC 0x60 + +/* Interrupt priority registers */ +#define CIPCC_SHIFT_PRI0 29 +#define CIPCC_SHIFT_PRI1 26 +#define CIPCC_SHIFT_PRI2 23 +#define CIPCC_SHIFT_PRI3 20 +#define CIPCC_SHIFT_PRI4 13 +#define CIPCC_SHIFT_PRI5 10 +#define CIPCC_SHIFT_PRI6 7 +#define CIPCC_SHIFT_PRI7 4 + +/* CICR priority modes */ +#define CICR_GWCC 0x00040000 +#define CICR_GXCC 0x00020000 +#define CICR_GYCC 0x00010000 +#define CICR_GZCC 0x00080000 +#define CICR_GRTA 0x00200000 +#define CICR_GRTB 0x00400000 +#define CICR_HPIT_SHIFT 8 +#define CICR_HPIT_MASK 0x00000300 +#define CICR_HP_SHIFT 24 +#define CICR_HP_MASK 0x3f000000 + +/* CICNR */ +#define CICNR_WCC1T_SHIFT 20 +#define CICNR_ZCC1T_SHIFT 28 +#define CICNR_YCC1T_SHIFT 12 +#define CICNR_XCC1T_SHIFT 4 + +/* CRICR */ +#define CRICR_RTA1T_SHIFT 20 +#define CRICR_RTB1T_SHIFT 28 + +/* Signal indicator */ +#define SIGNAL_MASK 3 +#define SIGNAL_HIGH 2 +#define SIGNAL_LOW 0 + +struct qe_ic { + /* Control registers offset */ + volatile u32 __iomem *regs; + + /* The remapper for this QEIC */ + struct irq_host *irqhost; + + /* The "linux" controller struct */ + struct irq_chip hc_irq; + + /* The device node of the interrupt controller */ + struct device_node *of_node; + + /* VIRQ numbers of QE high/low irqs */ + unsigned int virq_high; + unsigned int virq_low; +}; + +/* + * QE interrupt controller internal structure + */ +struct qe_ic_info { + u32 mask; /* location of this source at the QIMR register. */ + u32 mask_reg; /* Mask register offset */ + u8 pri_code; /* for grouped interrupts sources - the interrupt + code as appears at the group priority register */ + u32 pri_reg; /* Group priority register offset */ +}; + +#endif /* _POWERPC_SYSDEV_QE_IC_H */ diff --git a/arch/powerpc/sysdev/qe_lib/qe_io.c b/arch/powerpc/sysdev/qe_lib/qe_io.c new file mode 100644 index 00000000000..aea43597038 --- /dev/null +++ b/arch/powerpc/sysdev/qe_lib/qe_io.c @@ -0,0 +1,226 @@ +/* + * arch/powerpc/sysdev/qe_lib/qe_io.c + * + * QE Parallel I/O ports configuration routines + * + * Copyright (C) Freescale Semicondutor, Inc. 2006. All rights reserved. + * + * Author: Li Yang + * Based on code from Shlomi Gridish + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#undef DEBUG + +#define NUM_OF_PINS 32 + +struct port_regs { + __be32 cpodr; /* Open drain register */ + __be32 cpdata; /* Data register */ + __be32 cpdir1; /* Direction register */ + __be32 cpdir2; /* Direction register */ + __be32 cppar1; /* Pin assignment register */ + __be32 cppar2; /* Pin assignment register */ +}; + +static struct port_regs *par_io = NULL; +static int num_par_io_ports = 0; + +int par_io_init(struct device_node *np) +{ + struct resource res; + int ret; + const u32 *num_ports; + + /* Map Parallel I/O ports registers */ + ret = of_address_to_resource(np, 0, &res); + if (ret) + return ret; + par_io = ioremap(res.start, res.end - res.start + 1); + + num_ports = get_property(np, "num-ports", NULL); + if (num_ports) + num_par_io_ports = *num_ports; + + return 0; +} + +int par_io_config_pin(u8 port, u8 pin, int dir, int open_drain, + int assignment, int has_irq) +{ + u32 pin_mask1bit, pin_mask2bits, new_mask2bits, tmp_val; + + if (!par_io) + return -1; + + /* calculate pin location for single and 2 bits information */ + pin_mask1bit = (u32) (1 << (NUM_OF_PINS - (pin + 1))); + + /* Set open drain, if required */ + tmp_val = in_be32(&par_io[port].cpodr); + if (open_drain) + out_be32(&par_io[port].cpodr, pin_mask1bit | tmp_val); + else + out_be32(&par_io[port].cpodr, ~pin_mask1bit & tmp_val); + + /* define direction */ + tmp_val = (pin > (NUM_OF_PINS / 2) - 1) ? + in_be32(&par_io[port].cpdir2) : + in_be32(&par_io[port].cpdir1); + + /* get all bits mask for 2 bit per port */ + pin_mask2bits = (u32) (0x3 << (NUM_OF_PINS - + (pin % (NUM_OF_PINS / 2) + 1) * 2)); + + /* Get the final mask we need for the right definition */ + new_mask2bits = (u32) (dir << (NUM_OF_PINS - + (pin % (NUM_OF_PINS / 2) + 1) * 2)); + + /* clear and set 2 bits mask */ + if (pin > (NUM_OF_PINS / 2) - 1) { + out_be32(&par_io[port].cpdir2, + ~pin_mask2bits & tmp_val); + tmp_val &= ~pin_mask2bits; + out_be32(&par_io[port].cpdir2, new_mask2bits | tmp_val); + } else { + out_be32(&par_io[port].cpdir1, + ~pin_mask2bits & tmp_val); + tmp_val &= ~pin_mask2bits; + out_be32(&par_io[port].cpdir1, new_mask2bits | tmp_val); + } + /* define pin assignment */ + tmp_val = (pin > (NUM_OF_PINS / 2) - 1) ? + in_be32(&par_io[port].cppar2) : + in_be32(&par_io[port].cppar1); + + new_mask2bits = (u32) (assignment << (NUM_OF_PINS - + (pin % (NUM_OF_PINS / 2) + 1) * 2)); + /* clear and set 2 bits mask */ + if (pin > (NUM_OF_PINS / 2) - 1) { + out_be32(&par_io[port].cppar2, + ~pin_mask2bits & tmp_val); + tmp_val &= ~pin_mask2bits; + out_be32(&par_io[port].cppar2, new_mask2bits | tmp_val); + } else { + out_be32(&par_io[port].cppar1, + ~pin_mask2bits & tmp_val); + tmp_val &= ~pin_mask2bits; + out_be32(&par_io[port].cppar1, new_mask2bits | tmp_val); + } + + return 0; +} +EXPORT_SYMBOL(par_io_config_pin); + +int par_io_data_set(u8 port, u8 pin, u8 val) +{ + u32 pin_mask, tmp_val; + + if (port >= num_par_io_ports) + return -EINVAL; + if (pin >= NUM_OF_PINS) + return -EINVAL; + /* calculate pin location */ + pin_mask = (u32) (1 << (NUM_OF_PINS - 1 - pin)); + + tmp_val = in_be32(&par_io[port].cpdata); + + if (val == 0) /* clear */ + out_be32(&par_io[port].cpdata, ~pin_mask & tmp_val); + else /* set */ + out_be32(&par_io[port].cpdata, pin_mask | tmp_val); + + return 0; +} +EXPORT_SYMBOL(par_io_data_set); + +int par_io_of_config(struct device_node *np) +{ + struct device_node *pio; + const phandle *ph; + int pio_map_len; + const unsigned int *pio_map; + + if (par_io == NULL) { + printk(KERN_ERR "par_io not initialized \n"); + return -1; + } + + ph = get_property(np, "pio-handle", NULL); + if (ph == 0) { + printk(KERN_ERR "pio-handle not available \n"); + return -1; + } + + pio = of_find_node_by_phandle(*ph); + + pio_map = get_property(pio, "pio-map", &pio_map_len); + if (pio_map == NULL) { + printk(KERN_ERR "pio-map is not set! \n"); + return -1; + } + pio_map_len /= sizeof(unsigned int); + if ((pio_map_len % 6) != 0) { + printk(KERN_ERR "pio-map format wrong! \n"); + return -1; + } + + while (pio_map_len > 0) { + par_io_config_pin((u8) pio_map[0], (u8) pio_map[1], + (int) pio_map[2], (int) pio_map[3], + (int) pio_map[4], (int) pio_map[5]); + pio_map += 6; + pio_map_len -= 6; + } + of_node_put(pio); + return 0; +} +EXPORT_SYMBOL(par_io_of_config); + +#ifdef DEBUG +static void dump_par_io(void) +{ + int i; + + printk(KERN_INFO "PAR IO registars:\n"); + printk(KERN_INFO "Base address: 0x%08x\n", (u32) par_io); + for (i = 0; i < num_par_io_ports; i++) { + printk(KERN_INFO "cpodr[%d] : addr - 0x%08x, val - 0x%08x\n", + i, (u32) & par_io[i].cpodr, + in_be32(&par_io[i].cpodr)); + printk(KERN_INFO "cpdata[%d]: addr - 0x%08x, val - 0x%08x\n", + i, (u32) & par_io[i].cpdata, + in_be32(&par_io[i].cpdata)); + printk(KERN_INFO "cpdir1[%d]: addr - 0x%08x, val - 0x%08x\n", + i, (u32) & par_io[i].cpdir1, + in_be32(&par_io[i].cpdir1)); + printk(KERN_INFO "cpdir2[%d]: addr - 0x%08x, val - 0x%08x\n", + i, (u32) & par_io[i].cpdir2, + in_be32(&par_io[i].cpdir2)); + printk(KERN_INFO "cppar1[%d]: addr - 0x%08x, val - 0x%08x\n", + i, (u32) & par_io[i].cppar1, + in_be32(&par_io[i].cppar1)); + printk(KERN_INFO "cppar2[%d]: addr - 0x%08x, val - 0x%08x\n", + i, (u32) & par_io[i].cppar2, + in_be32(&par_io[i].cppar2)); + } + +} +EXPORT_SYMBOL(dump_par_io); +#endif /* DEBUG */ diff --git a/arch/powerpc/sysdev/qe_lib/ucc.c b/arch/powerpc/sysdev/qe_lib/ucc.c new file mode 100644 index 00000000000..916c9e5df57 --- /dev/null +++ b/arch/powerpc/sysdev/qe_lib/ucc.c @@ -0,0 +1,251 @@ +/* + * arch/powerpc/sysdev/qe_lib/ucc.c + * + * QE UCC API Set - UCC specific routines implementations. + * + * Copyright (C) 2006 Freescale Semicondutor, Inc. All rights reserved. + * + * Authors: Shlomi Gridish + * Li Yang + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include + +static DEFINE_SPINLOCK(ucc_lock); + +int ucc_set_qe_mux_mii_mng(int ucc_num) +{ + unsigned long flags; + + spin_lock_irqsave(&ucc_lock, flags); + out_be32(&qe_immr->qmx.cmxgcr, + ((in_be32(&qe_immr->qmx.cmxgcr) & + ~QE_CMXGCR_MII_ENET_MNG) | + (ucc_num << QE_CMXGCR_MII_ENET_MNG_SHIFT))); + spin_unlock_irqrestore(&ucc_lock, flags); + + return 0; +} + +int ucc_set_type(int ucc_num, struct ucc_common *regs, + enum ucc_speed_type speed) +{ + u8 guemr = 0; + + /* check if the UCC number is in range. */ + if ((ucc_num > UCC_MAX_NUM - 1) || (ucc_num < 0)) + return -EINVAL; + + guemr = regs->guemr; + guemr &= ~(UCC_GUEMR_MODE_MASK_RX | UCC_GUEMR_MODE_MASK_TX); + switch (speed) { + case UCC_SPEED_TYPE_SLOW: + guemr |= (UCC_GUEMR_MODE_SLOW_RX | UCC_GUEMR_MODE_SLOW_TX); + break; + case UCC_SPEED_TYPE_FAST: + guemr |= (UCC_GUEMR_MODE_FAST_RX | UCC_GUEMR_MODE_FAST_TX); + break; + default: + return -EINVAL; + } + regs->guemr = guemr; + + return 0; +} + +int ucc_init_guemr(struct ucc_common *regs) +{ + u8 guemr = 0; + + if (!regs) + return -EINVAL; + + /* Set bit 3 (which is reserved in the GUEMR register) to 1 */ + guemr = UCC_GUEMR_SET_RESERVED3; + + regs->guemr = guemr; + + return 0; +} + +static void get_cmxucr_reg(int ucc_num, volatile u32 ** p_cmxucr, u8 * reg_num, + u8 * shift) +{ + switch (ucc_num) { + case 0: *p_cmxucr = &(qe_immr->qmx.cmxucr1); + *reg_num = 1; + *shift = 16; + break; + case 2: *p_cmxucr = &(qe_immr->qmx.cmxucr1); + *reg_num = 1; + *shift = 0; + break; + case 4: *p_cmxucr = &(qe_immr->qmx.cmxucr2); + *reg_num = 2; + *shift = 16; + break; + case 6: *p_cmxucr = &(qe_immr->qmx.cmxucr2); + *reg_num = 2; + *shift = 0; + break; + case 1: *p_cmxucr = &(qe_immr->qmx.cmxucr3); + *reg_num = 3; + *shift = 16; + break; + case 3: *p_cmxucr = &(qe_immr->qmx.cmxucr3); + *reg_num = 3; + *shift = 0; + break; + case 5: *p_cmxucr = &(qe_immr->qmx.cmxucr4); + *reg_num = 4; + *shift = 16; + break; + case 7: *p_cmxucr = &(qe_immr->qmx.cmxucr4); + *reg_num = 4; + *shift = 0; + break; + default: + break; + } +} + +int ucc_mux_set_grant_tsa_bkpt(int ucc_num, int set, u32 mask) +{ + volatile u32 *p_cmxucr; + u8 reg_num; + u8 shift; + + /* check if the UCC number is in range. */ + if ((ucc_num > UCC_MAX_NUM - 1) || (ucc_num < 0)) + return -EINVAL; + + get_cmxucr_reg(ucc_num, &p_cmxucr, ®_num, &shift); + + if (set) + out_be32(p_cmxucr, in_be32(p_cmxucr) | (mask << shift)); + else + out_be32(p_cmxucr, in_be32(p_cmxucr) & ~(mask << shift)); + + return 0; +} + +int ucc_set_qe_mux_rxtx(int ucc_num, enum qe_clock clock, enum comm_dir mode) +{ + volatile u32 *p_cmxucr; + u8 reg_num; + u8 shift; + u32 clock_bits; + u32 clock_mask; + int source = -1; + + /* check if the UCC number is in range. */ + if ((ucc_num > UCC_MAX_NUM - 1) || (ucc_num < 0)) + return -EINVAL; + + if (!((mode == COMM_DIR_RX) || (mode == COMM_DIR_TX))) { + printk(KERN_ERR + "ucc_set_qe_mux_rxtx: bad comm mode type passed."); + return -EINVAL; + } + + get_cmxucr_reg(ucc_num, &p_cmxucr, ®_num, &shift); + + switch (reg_num) { + case 1: + switch (clock) { + case QE_BRG1: source = 1; break; + case QE_BRG2: source = 2; break; + case QE_BRG7: source = 3; break; + case QE_BRG8: source = 4; break; + case QE_CLK9: source = 5; break; + case QE_CLK10: source = 6; break; + case QE_CLK11: source = 7; break; + case QE_CLK12: source = 8; break; + case QE_CLK15: source = 9; break; + case QE_CLK16: source = 10; break; + default: source = -1; break; + } + break; + case 2: + switch (clock) { + case QE_BRG5: source = 1; break; + case QE_BRG6: source = 2; break; + case QE_BRG7: source = 3; break; + case QE_BRG8: source = 4; break; + case QE_CLK13: source = 5; break; + case QE_CLK14: source = 6; break; + case QE_CLK19: source = 7; break; + case QE_CLK20: source = 8; break; + case QE_CLK15: source = 9; break; + case QE_CLK16: source = 10; break; + default: source = -1; break; + } + break; + case 3: + switch (clock) { + case QE_BRG9: source = 1; break; + case QE_BRG10: source = 2; break; + case QE_BRG15: source = 3; break; + case QE_BRG16: source = 4; break; + case QE_CLK3: source = 5; break; + case QE_CLK4: source = 6; break; + case QE_CLK17: source = 7; break; + case QE_CLK18: source = 8; break; + case QE_CLK7: source = 9; break; + case QE_CLK8: source = 10; break; + default: source = -1; break; + } + break; + case 4: + switch (clock) { + case QE_BRG13: source = 1; break; + case QE_BRG14: source = 2; break; + case QE_BRG15: source = 3; break; + case QE_BRG16: source = 4; break; + case QE_CLK5: source = 5; break; + case QE_CLK6: source = 6; break; + case QE_CLK21: source = 7; break; + case QE_CLK22: source = 8; break; + case QE_CLK7: source = 9; break; + case QE_CLK8: source = 10; break; + default: source = -1; break; + } + break; + default: + source = -1; + break; + } + + if (source == -1) { + printk(KERN_ERR + "ucc_set_qe_mux_rxtx: Bad combination of clock and UCC."); + return -ENOENT; + } + + clock_bits = (u32) source; + clock_mask = QE_CMXUCR_TX_CLK_SRC_MASK; + if (mode == COMM_DIR_RX) { + clock_bits <<= 4; /* Rx field is 4 bits to left of Tx field */ + clock_mask <<= 4; /* Rx field is 4 bits to left of Tx field */ + } + clock_bits <<= shift; + clock_mask <<= shift; + + out_be32(p_cmxucr, (in_be32(p_cmxucr) & ~clock_mask) | clock_bits); + + return 0; +} diff --git a/arch/powerpc/sysdev/qe_lib/ucc_fast.c b/arch/powerpc/sysdev/qe_lib/ucc_fast.c new file mode 100644 index 00000000000..c2be7348fcb --- /dev/null +++ b/arch/powerpc/sysdev/qe_lib/ucc_fast.c @@ -0,0 +1,396 @@ +/* + * arch/powerpc/sysdev/qe_lib/ucc_fast.c + * + * QE UCC Fast API Set - UCC Fast specific routines implementations. + * + * Copyright (C) 2006 Freescale Semicondutor, Inc. All rights reserved. + * + * Authors: Shlomi Gridish + * Li Yang + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#include +#include + +#define uccf_printk(level, format, arg...) \ + printk(level format "\n", ## arg) + +#define uccf_dbg(format, arg...) \ + uccf_printk(KERN_DEBUG , format , ## arg) +#define uccf_err(format, arg...) \ + uccf_printk(KERN_ERR , format , ## arg) +#define uccf_info(format, arg...) \ + uccf_printk(KERN_INFO , format , ## arg) +#define uccf_warn(format, arg...) \ + uccf_printk(KERN_WARNING , format , ## arg) + +#ifdef UCCF_VERBOSE_DEBUG +#define uccf_vdbg uccf_dbg +#else +#define uccf_vdbg(fmt, args...) do { } while (0) +#endif /* UCCF_VERBOSE_DEBUG */ + +void ucc_fast_dump_regs(struct ucc_fast_private * uccf) +{ + uccf_info("UCC%d Fast registers:", uccf->uf_info->ucc_num); + uccf_info("Base address: 0x%08x", (u32) uccf->uf_regs); + + uccf_info("gumr : addr - 0x%08x, val - 0x%08x", + (u32) & uccf->uf_regs->gumr, in_be32(&uccf->uf_regs->gumr)); + uccf_info("upsmr : addr - 0x%08x, val - 0x%08x", + (u32) & uccf->uf_regs->upsmr, in_be32(&uccf->uf_regs->upsmr)); + uccf_info("utodr : addr - 0x%08x, val - 0x%04x", + (u32) & uccf->uf_regs->utodr, in_be16(&uccf->uf_regs->utodr)); + uccf_info("udsr : addr - 0x%08x, val - 0x%04x", + (u32) & uccf->uf_regs->udsr, in_be16(&uccf->uf_regs->udsr)); + uccf_info("ucce : addr - 0x%08x, val - 0x%08x", + (u32) & uccf->uf_regs->ucce, in_be32(&uccf->uf_regs->ucce)); + uccf_info("uccm : addr - 0x%08x, val - 0x%08x", + (u32) & uccf->uf_regs->uccm, in_be32(&uccf->uf_regs->uccm)); + uccf_info("uccs : addr - 0x%08x, val - 0x%02x", + (u32) & uccf->uf_regs->uccs, uccf->uf_regs->uccs); + uccf_info("urfb : addr - 0x%08x, val - 0x%08x", + (u32) & uccf->uf_regs->urfb, in_be32(&uccf->uf_regs->urfb)); + uccf_info("urfs : addr - 0x%08x, val - 0x%04x", + (u32) & uccf->uf_regs->urfs, in_be16(&uccf->uf_regs->urfs)); + uccf_info("urfet : addr - 0x%08x, val - 0x%04x", + (u32) & uccf->uf_regs->urfet, in_be16(&uccf->uf_regs->urfet)); + uccf_info("urfset: addr - 0x%08x, val - 0x%04x", + (u32) & uccf->uf_regs->urfset, + in_be16(&uccf->uf_regs->urfset)); + uccf_info("utfb : addr - 0x%08x, val - 0x%08x", + (u32) & uccf->uf_regs->utfb, in_be32(&uccf->uf_regs->utfb)); + uccf_info("utfs : addr - 0x%08x, val - 0x%04x", + (u32) & uccf->uf_regs->utfs, in_be16(&uccf->uf_regs->utfs)); + uccf_info("utfet : addr - 0x%08x, val - 0x%04x", + (u32) & uccf->uf_regs->utfet, in_be16(&uccf->uf_regs->utfet)); + uccf_info("utftt : addr - 0x%08x, val - 0x%04x", + (u32) & uccf->uf_regs->utftt, in_be16(&uccf->uf_regs->utftt)); + uccf_info("utpt : addr - 0x%08x, val - 0x%04x", + (u32) & uccf->uf_regs->utpt, in_be16(&uccf->uf_regs->utpt)); + uccf_info("urtry : addr - 0x%08x, val - 0x%08x", + (u32) & uccf->uf_regs->urtry, in_be32(&uccf->uf_regs->urtry)); + uccf_info("guemr : addr - 0x%08x, val - 0x%02x", + (u32) & uccf->uf_regs->guemr, uccf->uf_regs->guemr); +} + +u32 ucc_fast_get_qe_cr_subblock(int uccf_num) +{ + switch (uccf_num) { + case 0: return QE_CR_SUBBLOCK_UCCFAST1; + case 1: return QE_CR_SUBBLOCK_UCCFAST2; + case 2: return QE_CR_SUBBLOCK_UCCFAST3; + case 3: return QE_CR_SUBBLOCK_UCCFAST4; + case 4: return QE_CR_SUBBLOCK_UCCFAST5; + case 5: return QE_CR_SUBBLOCK_UCCFAST6; + case 6: return QE_CR_SUBBLOCK_UCCFAST7; + case 7: return QE_CR_SUBBLOCK_UCCFAST8; + default: return QE_CR_SUBBLOCK_INVALID; + } +} + +void ucc_fast_transmit_on_demand(struct ucc_fast_private * uccf) +{ + out_be16(&uccf->uf_regs->utodr, UCC_FAST_TOD); +} + +void ucc_fast_enable(struct ucc_fast_private * uccf, enum comm_dir mode) +{ + struct ucc_fast *uf_regs; + u32 gumr; + + uf_regs = uccf->uf_regs; + + /* Enable reception and/or transmission on this UCC. */ + gumr = in_be32(&uf_regs->gumr); + if (mode & COMM_DIR_TX) { + gumr |= UCC_FAST_GUMR_ENT; + uccf->enabled_tx = 1; + } + if (mode & COMM_DIR_RX) { + gumr |= UCC_FAST_GUMR_ENR; + uccf->enabled_rx = 1; + } + out_be32(&uf_regs->gumr, gumr); +} + +void ucc_fast_disable(struct ucc_fast_private * uccf, enum comm_dir mode) +{ + struct ucc_fast *uf_regs; + u32 gumr; + + uf_regs = uccf->uf_regs; + + /* Disable reception and/or transmission on this UCC. */ + gumr = in_be32(&uf_regs->gumr); + if (mode & COMM_DIR_TX) { + gumr &= ~UCC_FAST_GUMR_ENT; + uccf->enabled_tx = 0; + } + if (mode & COMM_DIR_RX) { + gumr &= ~UCC_FAST_GUMR_ENR; + uccf->enabled_rx = 0; + } + out_be32(&uf_regs->gumr, gumr); +} + +int ucc_fast_init(struct ucc_fast_info * uf_info, struct ucc_fast_private ** uccf_ret) +{ + struct ucc_fast_private *uccf; + struct ucc_fast *uf_regs; + u32 gumr = 0; + int ret; + + uccf_vdbg("%s: IN", __FUNCTION__); + + if (!uf_info) + return -EINVAL; + + /* check if the UCC port number is in range. */ + if ((uf_info->ucc_num < 0) || (uf_info->ucc_num > UCC_MAX_NUM - 1)) { + uccf_err("ucc_fast_init: Illagal UCC number!"); + return -EINVAL; + } + + /* Check that 'max_rx_buf_length' is properly aligned (4). */ + if (uf_info->max_rx_buf_length & (UCC_FAST_MRBLR_ALIGNMENT - 1)) { + uccf_err("ucc_fast_init: max_rx_buf_length not aligned."); + return -EINVAL; + } + + /* Validate Virtual Fifo register values */ + if (uf_info->urfs < UCC_FAST_URFS_MIN_VAL) { + uccf_err + ("ucc_fast_init: Virtual Fifo register urfs too small."); + return -EINVAL; + } + + if (uf_info->urfs & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) { + uccf_err + ("ucc_fast_init: Virtual Fifo register urfs not aligned."); + return -EINVAL; + } + + if (uf_info->urfet & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) { + uccf_err + ("ucc_fast_init: Virtual Fifo register urfet not aligned."); + return -EINVAL; + } + + if (uf_info->urfset & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) { + uccf_err + ("ucc_fast_init: Virtual Fifo register urfset not aligned."); + return -EINVAL; + } + + if (uf_info->utfs & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) { + uccf_err + ("ucc_fast_init: Virtual Fifo register utfs not aligned."); + return -EINVAL; + } + + if (uf_info->utfet & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) { + uccf_err + ("ucc_fast_init: Virtual Fifo register utfet not aligned."); + return -EINVAL; + } + + if (uf_info->utftt & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) { + uccf_err + ("ucc_fast_init: Virtual Fifo register utftt not aligned."); + return -EINVAL; + } + + uccf = (struct ucc_fast_private *) + kmalloc(sizeof(struct ucc_fast_private), GFP_KERNEL); + if (!uccf) { + uccf_err + ("ucc_fast_init: No memory for UCC slow data structure!"); + return -ENOMEM; + } + memset(uccf, 0, sizeof(struct ucc_fast_private)); + + /* Fill fast UCC structure */ + uccf->uf_info = uf_info; + /* Set the PHY base address */ + uccf->uf_regs = + (struct ucc_fast *) ioremap(uf_info->regs, sizeof(struct ucc_fast)); + if (uccf->uf_regs == NULL) { + uccf_err + ("ucc_fast_init: No memory map for UCC slow controller!"); + return -ENOMEM; + } + + uccf->enabled_tx = 0; + uccf->enabled_rx = 0; + uccf->stopped_tx = 0; + uccf->stopped_rx = 0; + uf_regs = uccf->uf_regs; + uccf->p_ucce = (u32 *) & (uf_regs->ucce); + uccf->p_uccm = (u32 *) & (uf_regs->uccm); +#ifdef STATISTICS + uccf->tx_frames = 0; + uccf->rx_frames = 0; + uccf->rx_discarded = 0; +#endif /* STATISTICS */ + + /* Init Guemr register */ + if ((ret = ucc_init_guemr((struct ucc_common *) (uf_regs)))) { + uccf_err("ucc_fast_init: Could not init the guemr register."); + ucc_fast_free(uccf); + return ret; + } + + /* Set UCC to fast type */ + if ((ret = ucc_set_type(uf_info->ucc_num, + (struct ucc_common *) (uf_regs), + UCC_SPEED_TYPE_FAST))) { + uccf_err("ucc_fast_init: Could not set type to fast."); + ucc_fast_free(uccf); + return ret; + } + + uccf->mrblr = uf_info->max_rx_buf_length; + + /* Set GUMR */ + /* For more details see the hardware spec. */ + /* gumr starts as zero. */ + if (uf_info->tci) + gumr |= UCC_FAST_GUMR_TCI; + gumr |= uf_info->ttx_trx; + if (uf_info->cdp) + gumr |= UCC_FAST_GUMR_CDP; + if (uf_info->ctsp) + gumr |= UCC_FAST_GUMR_CTSP; + if (uf_info->cds) + gumr |= UCC_FAST_GUMR_CDS; + if (uf_info->ctss) + gumr |= UCC_FAST_GUMR_CTSS; + if (uf_info->txsy) + gumr |= UCC_FAST_GUMR_TXSY; + if (uf_info->rsyn) + gumr |= UCC_FAST_GUMR_RSYN; + gumr |= uf_info->synl; + if (uf_info->rtsm) + gumr |= UCC_FAST_GUMR_RTSM; + gumr |= uf_info->renc; + if (uf_info->revd) + gumr |= UCC_FAST_GUMR_REVD; + gumr |= uf_info->tenc; + gumr |= uf_info->tcrc; + gumr |= uf_info->mode; + out_be32(&uf_regs->gumr, gumr); + + /* Allocate memory for Tx Virtual Fifo */ + uccf->ucc_fast_tx_virtual_fifo_base_offset = + qe_muram_alloc(uf_info->utfs, UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT); + if (IS_MURAM_ERR(uccf->ucc_fast_tx_virtual_fifo_base_offset)) { + uccf_err + ("ucc_fast_init: Can not allocate MURAM memory for " + "struct ucc_fastx_virtual_fifo_base_offset."); + uccf->ucc_fast_tx_virtual_fifo_base_offset = 0; + ucc_fast_free(uccf); + return -ENOMEM; + } + + /* Allocate memory for Rx Virtual Fifo */ + uccf->ucc_fast_rx_virtual_fifo_base_offset = + qe_muram_alloc(uf_info->urfs + + (u32) + UCC_FAST_RECEIVE_VIRTUAL_FIFO_SIZE_FUDGE_FACTOR, + UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT); + if (IS_MURAM_ERR(uccf->ucc_fast_rx_virtual_fifo_base_offset)) { + uccf_err + ("ucc_fast_init: Can not allocate MURAM memory for " + "ucc_fast_rx_virtual_fifo_base_offset."); + uccf->ucc_fast_rx_virtual_fifo_base_offset = 0; + ucc_fast_free(uccf); + return -ENOMEM; + } + + /* Set Virtual Fifo registers */ + out_be16(&uf_regs->urfs, uf_info->urfs); + out_be16(&uf_regs->urfet, uf_info->urfet); + out_be16(&uf_regs->urfset, uf_info->urfset); + out_be16(&uf_regs->utfs, uf_info->utfs); + out_be16(&uf_regs->utfet, uf_info->utfet); + out_be16(&uf_regs->utftt, uf_info->utftt); + /* utfb, urfb are offsets from MURAM base */ + out_be32(&uf_regs->utfb, uccf->ucc_fast_tx_virtual_fifo_base_offset); + out_be32(&uf_regs->urfb, uccf->ucc_fast_rx_virtual_fifo_base_offset); + + /* Mux clocking */ + /* Grant Support */ + ucc_set_qe_mux_grant(uf_info->ucc_num, uf_info->grant_support); + /* Breakpoint Support */ + ucc_set_qe_mux_bkpt(uf_info->ucc_num, uf_info->brkpt_support); + /* Set Tsa or NMSI mode. */ + ucc_set_qe_mux_tsa(uf_info->ucc_num, uf_info->tsa); + /* If NMSI (not Tsa), set Tx and Rx clock. */ + if (!uf_info->tsa) { + /* Rx clock routing */ + if (uf_info->rx_clock != QE_CLK_NONE) { + if (ucc_set_qe_mux_rxtx + (uf_info->ucc_num, uf_info->rx_clock, + COMM_DIR_RX)) { + uccf_err + ("ucc_fast_init: Illegal value for parameter 'RxClock'."); + ucc_fast_free(uccf); + return -EINVAL; + } + } + /* Tx clock routing */ + if (uf_info->tx_clock != QE_CLK_NONE) { + if (ucc_set_qe_mux_rxtx + (uf_info->ucc_num, uf_info->tx_clock, + COMM_DIR_TX)) { + uccf_err + ("ucc_fast_init: Illegal value for parameter 'TxClock'."); + ucc_fast_free(uccf); + return -EINVAL; + } + } + } + + /* Set interrupt mask register at UCC level. */ + out_be32(&uf_regs->uccm, uf_info->uccm_mask); + + /* First, clear anything pending at UCC level, + * otherwise, old garbage may come through + * as soon as the dam is opened + * Writing '1' clears + */ + out_be32(&uf_regs->ucce, 0xffffffff); + + *uccf_ret = uccf; + return 0; +} + +void ucc_fast_free(struct ucc_fast_private * uccf) +{ + if (!uccf) + return; + + if (uccf->ucc_fast_tx_virtual_fifo_base_offset) + qe_muram_free(uccf->ucc_fast_tx_virtual_fifo_base_offset); + + if (uccf->ucc_fast_rx_virtual_fifo_base_offset) + qe_muram_free(uccf->ucc_fast_rx_virtual_fifo_base_offset); + + kfree(uccf); +} diff --git a/arch/powerpc/sysdev/qe_lib/ucc_slow.c b/arch/powerpc/sysdev/qe_lib/ucc_slow.c new file mode 100644 index 00000000000..1fb88ef7cf0 --- /dev/null +++ b/arch/powerpc/sysdev/qe_lib/ucc_slow.c @@ -0,0 +1,404 @@ +/* + * Copyright (C) 2006 Freescale Semicondutor, Inc. All rights reserved. + * + * Authors: Shlomi Gridish + * Li Yang + * + * Description: + * QE UCC Slow API Set - UCC Slow specific routines implementations. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +#include +#include + +#define uccs_printk(level, format, arg...) \ + printk(level format "\n", ## arg) + +#define uccs_dbg(format, arg...) \ + uccs_printk(KERN_DEBUG , format , ## arg) +#define uccs_err(format, arg...) \ + uccs_printk(KERN_ERR , format , ## arg) +#define uccs_info(format, arg...) \ + uccs_printk(KERN_INFO , format , ## arg) +#define uccs_warn(format, arg...) \ + uccs_printk(KERN_WARNING , format , ## arg) + +#ifdef UCCS_VERBOSE_DEBUG +#define uccs_vdbg uccs_dbg +#else +#define uccs_vdbg(fmt, args...) do { } while (0) +#endif /* UCCS_VERBOSE_DEBUG */ + +u32 ucc_slow_get_qe_cr_subblock(int uccs_num) +{ + switch (uccs_num) { + case 0: return QE_CR_SUBBLOCK_UCCSLOW1; + case 1: return QE_CR_SUBBLOCK_UCCSLOW2; + case 2: return QE_CR_SUBBLOCK_UCCSLOW3; + case 3: return QE_CR_SUBBLOCK_UCCSLOW4; + case 4: return QE_CR_SUBBLOCK_UCCSLOW5; + case 5: return QE_CR_SUBBLOCK_UCCSLOW6; + case 6: return QE_CR_SUBBLOCK_UCCSLOW7; + case 7: return QE_CR_SUBBLOCK_UCCSLOW8; + default: return QE_CR_SUBBLOCK_INVALID; + } +} + +void ucc_slow_poll_transmitter_now(struct ucc_slow_private * uccs) +{ + out_be16(&uccs->us_regs->utodr, UCC_SLOW_TOD); +} + +void ucc_slow_graceful_stop_tx(struct ucc_slow_private * uccs) +{ + struct ucc_slow_info *us_info = uccs->us_info; + u32 id; + + id = ucc_slow_get_qe_cr_subblock(us_info->ucc_num); + qe_issue_cmd(QE_GRACEFUL_STOP_TX, id, + QE_CR_PROTOCOL_UNSPECIFIED, 0); +} + +void ucc_slow_stop_tx(struct ucc_slow_private * uccs) +{ + struct ucc_slow_info *us_info = uccs->us_info; + u32 id; + + id = ucc_slow_get_qe_cr_subblock(us_info->ucc_num); + qe_issue_cmd(QE_STOP_TX, id, QE_CR_PROTOCOL_UNSPECIFIED, 0); +} + +void ucc_slow_restart_tx(struct ucc_slow_private * uccs) +{ + struct ucc_slow_info *us_info = uccs->us_info; + u32 id; + + id = ucc_slow_get_qe_cr_subblock(us_info->ucc_num); + qe_issue_cmd(QE_RESTART_TX, id, QE_CR_PROTOCOL_UNSPECIFIED, 0); +} + +void ucc_slow_enable(struct ucc_slow_private * uccs, enum comm_dir mode) +{ + struct ucc_slow *us_regs; + u32 gumr_l; + + us_regs = uccs->us_regs; + + /* Enable reception and/or transmission on this UCC. */ + gumr_l = in_be32(&us_regs->gumr_l); + if (mode & COMM_DIR_TX) { + gumr_l |= UCC_SLOW_GUMR_L_ENT; + uccs->enabled_tx = 1; + } + if (mode & COMM_DIR_RX) { + gumr_l |= UCC_SLOW_GUMR_L_ENR; + uccs->enabled_rx = 1; + } + out_be32(&us_regs->gumr_l, gumr_l); +} + +void ucc_slow_disable(struct ucc_slow_private * uccs, enum comm_dir mode) +{ + struct ucc_slow *us_regs; + u32 gumr_l; + + us_regs = uccs->us_regs; + + /* Disable reception and/or transmission on this UCC. */ + gumr_l = in_be32(&us_regs->gumr_l); + if (mode & COMM_DIR_TX) { + gumr_l &= ~UCC_SLOW_GUMR_L_ENT; + uccs->enabled_tx = 0; + } + if (mode & COMM_DIR_RX) { + gumr_l &= ~UCC_SLOW_GUMR_L_ENR; + uccs->enabled_rx = 0; + } + out_be32(&us_regs->gumr_l, gumr_l); +} + +int ucc_slow_init(struct ucc_slow_info * us_info, struct ucc_slow_private ** uccs_ret) +{ + u32 i; + struct ucc_slow *us_regs; + u32 gumr; + u8 function_code = 0; + u8 *bd; + struct ucc_slow_private *uccs; + u32 id; + u32 command; + int ret; + + uccs_vdbg("%s: IN", __FUNCTION__); + + if (!us_info) + return -EINVAL; + + /* check if the UCC port number is in range. */ + if ((us_info->ucc_num < 0) || (us_info->ucc_num > UCC_MAX_NUM - 1)) { + uccs_err("ucc_slow_init: Illagal UCC number!"); + return -EINVAL; + } + + /* + * Set mrblr + * Check that 'max_rx_buf_length' is properly aligned (4), unless + * rfw is 1, meaning that QE accepts one byte at a time, unlike normal + * case when QE accepts 32 bits at a time. + */ + if ((!us_info->rfw) && + (us_info->max_rx_buf_length & (UCC_SLOW_MRBLR_ALIGNMENT - 1))) { + uccs_err("max_rx_buf_length not aligned."); + return -EINVAL; + } + + uccs = (struct ucc_slow_private *) + kmalloc(sizeof(struct ucc_slow_private), GFP_KERNEL); + if (!uccs) { + uccs_err + ("ucc_slow_init: No memory for UCC slow data structure!"); + return -ENOMEM; + } + memset(uccs, 0, sizeof(struct ucc_slow_private)); + + /* Fill slow UCC structure */ + uccs->us_info = us_info; + uccs->saved_uccm = 0; + uccs->p_rx_frame = 0; + uccs->us_regs = us_info->us_regs; + us_regs = uccs->us_regs; + uccs->p_ucce = (u16 *) & (us_regs->ucce); + uccs->p_uccm = (u16 *) & (us_regs->uccm); +#ifdef STATISTICS + uccs->rx_frames = 0; + uccs->tx_frames = 0; + uccs->rx_discarded = 0; +#endif /* STATISTICS */ + + /* Get PRAM base */ + uccs->us_pram_offset = qe_muram_alloc(UCC_SLOW_PRAM_SIZE, + ALIGNMENT_OF_UCC_SLOW_PRAM); + if (IS_MURAM_ERR(uccs->us_pram_offset)) { + uccs_err + ("ucc_slow_init: Can not allocate MURAM memory " + "for Slow UCC."); + ucc_slow_free(uccs); + return -ENOMEM; + } + id = ucc_slow_get_qe_cr_subblock(us_info->ucc_num); + qe_issue_cmd(QE_ASSIGN_PAGE_TO_DEVICE, id, QE_CR_PROTOCOL_UNSPECIFIED, + (u32) uccs->us_pram_offset); + + uccs->us_pram = qe_muram_addr(uccs->us_pram_offset); + + /* Init Guemr register */ + if ((ret = ucc_init_guemr((struct ucc_common *) (us_info->us_regs)))) { + uccs_err("ucc_slow_init: Could not init the guemr register."); + ucc_slow_free(uccs); + return ret; + } + + /* Set UCC to slow type */ + if ((ret = ucc_set_type(us_info->ucc_num, + (struct ucc_common *) (us_info->us_regs), + UCC_SPEED_TYPE_SLOW))) { + uccs_err("ucc_slow_init: Could not init the guemr register."); + ucc_slow_free(uccs); + return ret; + } + + out_be16(&uccs->us_pram->mrblr, us_info->max_rx_buf_length); + + INIT_LIST_HEAD(&uccs->confQ); + + /* Allocate BDs. */ + uccs->rx_base_offset = + qe_muram_alloc(us_info->rx_bd_ring_len * sizeof(struct qe_bd), + QE_ALIGNMENT_OF_BD); + if (IS_MURAM_ERR(uccs->rx_base_offset)) { + uccs_err("ucc_slow_init: No memory for Rx BD's."); + uccs->rx_base_offset = 0; + ucc_slow_free(uccs); + return -ENOMEM; + } + + uccs->tx_base_offset = + qe_muram_alloc(us_info->tx_bd_ring_len * sizeof(struct qe_bd), + QE_ALIGNMENT_OF_BD); + if (IS_MURAM_ERR(uccs->tx_base_offset)) { + uccs_err("ucc_slow_init: No memory for Tx BD's."); + uccs->tx_base_offset = 0; + ucc_slow_free(uccs); + return -ENOMEM; + } + + /* Init Tx bds */ + bd = uccs->confBd = uccs->tx_bd = qe_muram_addr(uccs->tx_base_offset); + for (i = 0; i < us_info->tx_bd_ring_len; i++) { + /* clear bd buffer */ + out_be32(&(((struct qe_bd *)bd)->buf), 0); + /* set bd status and length */ + out_be32((u32*)bd, 0); + bd += sizeof(struct qe_bd); + } + bd -= sizeof(struct qe_bd); + /* set bd status and length */ + out_be32((u32*)bd, T_W); /* for last BD set Wrap bit */ + + /* Init Rx bds */ + bd = uccs->rx_bd = qe_muram_addr(uccs->rx_base_offset); + for (i = 0; i < us_info->rx_bd_ring_len; i++) { + /* set bd status and length */ + out_be32((u32*)bd, 0); + /* clear bd buffer */ + out_be32(&(((struct qe_bd *)bd)->buf), 0); + bd += sizeof(struct qe_bd); + } + bd -= sizeof(struct qe_bd); + /* set bd status and length */ + out_be32((u32*)bd, R_W); /* for last BD set Wrap bit */ + + /* Set GUMR (For more details see the hardware spec.). */ + /* gumr_h */ + gumr = 0; + gumr |= us_info->tcrc; + if (us_info->cdp) + gumr |= UCC_SLOW_GUMR_H_CDP; + if (us_info->ctsp) + gumr |= UCC_SLOW_GUMR_H_CTSP; + if (us_info->cds) + gumr |= UCC_SLOW_GUMR_H_CDS; + if (us_info->ctss) + gumr |= UCC_SLOW_GUMR_H_CTSS; + if (us_info->tfl) + gumr |= UCC_SLOW_GUMR_H_TFL; + if (us_info->rfw) + gumr |= UCC_SLOW_GUMR_H_RFW; + if (us_info->txsy) + gumr |= UCC_SLOW_GUMR_H_TXSY; + if (us_info->rtsm) + gumr |= UCC_SLOW_GUMR_H_RTSM; + out_be32(&us_regs->gumr_h, gumr); + + /* gumr_l */ + gumr = 0; + if (us_info->tci) + gumr |= UCC_SLOW_GUMR_L_TCI; + if (us_info->rinv) + gumr |= UCC_SLOW_GUMR_L_RINV; + if (us_info->tinv) + gumr |= UCC_SLOW_GUMR_L_TINV; + if (us_info->tend) + gumr |= UCC_SLOW_GUMR_L_TEND; + gumr |= us_info->tdcr; + gumr |= us_info->rdcr; + gumr |= us_info->tenc; + gumr |= us_info->renc; + gumr |= us_info->diag; + gumr |= us_info->mode; + out_be32(&us_regs->gumr_l, gumr); + + /* Function code registers */ + /* function_code has initial value 0 */ + + /* if the data is in cachable memory, the 'global' */ + /* in the function code should be set. */ + function_code |= us_info->data_mem_part; + function_code |= QE_BMR_BYTE_ORDER_BO_MOT; /* Required for QE */ + uccs->us_pram->tfcr = function_code; + uccs->us_pram->rfcr = function_code; + + /* rbase, tbase are offsets from MURAM base */ + out_be16(&uccs->us_pram->rbase, uccs->us_pram_offset); + out_be16(&uccs->us_pram->tbase, uccs->us_pram_offset); + + /* Mux clocking */ + /* Grant Support */ + ucc_set_qe_mux_grant(us_info->ucc_num, us_info->grant_support); + /* Breakpoint Support */ + ucc_set_qe_mux_bkpt(us_info->ucc_num, us_info->brkpt_support); + /* Set Tsa or NMSI mode. */ + ucc_set_qe_mux_tsa(us_info->ucc_num, us_info->tsa); + /* If NMSI (not Tsa), set Tx and Rx clock. */ + if (!us_info->tsa) { + /* Rx clock routing */ + if (ucc_set_qe_mux_rxtx + (us_info->ucc_num, us_info->rx_clock, COMM_DIR_RX)) { + uccs_err + ("ucc_slow_init: Illegal value for parameter" + " 'RxClock'."); + ucc_slow_free(uccs); + return -EINVAL; + } + /* Tx clock routing */ + if (ucc_set_qe_mux_rxtx(us_info->ucc_num, + us_info->tx_clock, COMM_DIR_TX)) { + uccs_err + ("ucc_slow_init: Illegal value for parameter " + "'TxClock'."); + ucc_slow_free(uccs); + return -EINVAL; + } + } + + /* + * INTERRUPTS + */ + /* Set interrupt mask register at UCC level. */ + out_be16(&us_regs->uccm, us_info->uccm_mask); + + /* First, clear anything pending at UCC level, */ + /* otherwise, old garbage may come through */ + /* as soon as the dam is opened. */ + + /* Writing '1' clears */ + out_be16(&us_regs->ucce, 0xffff); + + /* Issue QE Init command */ + if (us_info->init_tx && us_info->init_rx) + command = QE_INIT_TX_RX; + else if (us_info->init_tx) + command = QE_INIT_TX; + else + command = QE_INIT_RX; /* We know at least one is TRUE */ + id = ucc_slow_get_qe_cr_subblock(us_info->ucc_num); + qe_issue_cmd(command, id, QE_CR_PROTOCOL_UNSPECIFIED, 0); + + *uccs_ret = uccs; + return 0; +} + +void ucc_slow_free(struct ucc_slow_private * uccs) +{ + if (!uccs) + return; + + if (uccs->rx_base_offset) + qe_muram_free(uccs->rx_base_offset); + + if (uccs->tx_base_offset) + qe_muram_free(uccs->tx_base_offset); + + if (uccs->us_pram) { + qe_muram_free(uccs->us_pram_offset); + uccs->us_pram = NULL; + } + + kfree(uccs); +} -- cgit v1.2.3-70-g09d2