From d04c56f73c30a5e593202ecfcf25ed43d42363a2 Mon Sep 17 00:00:00 2001 From: Paul Mackerras Date: Wed, 4 Oct 2006 16:47:49 +1000 Subject: [POWERPC] Lazy interrupt disabling for 64-bit machines This implements a lazy strategy for disabling interrupts. This means that local_irq_disable() et al. just clear the 'interrupts are enabled' flag in the paca. If an interrupt comes along, the interrupt entry code notices that interrupts are supposed to be disabled, and clears the EE bit in SRR1, clears the 'interrupts are hard-enabled' flag in the paca, and returns. This means that interrupts only actually get disabled in the processor when an interrupt comes along. When interrupts are enabled by local_irq_enable() et al., the code sets the interrupts-enabled flag in the paca, and then checks whether interrupts got hard-disabled. If so, it also sets the EE bit in the MSR to hard-enable the interrupts. This has the potential to improve performance, and also makes it easier to make a kernel that can boot on iSeries and on other 64-bit machines, since this lazy-disable strategy is very similar to the soft-disable strategy that iSeries already uses. This version renames paca->proc_enabled to paca->soft_enabled, and changes a couple of soft-disables in the kexec code to hard-disables, which should fix the crash that Michael Ellerman saw. This doesn't yet use a reserved CR field for the soft_enabled and hard_enabled flags. This applies on top of Stephen Rothwell's patches to make it possible to build a combined iSeries/other kernel. Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/asm-offsets.c | 3 +- arch/powerpc/kernel/crash.c | 4 +- arch/powerpc/kernel/entry_64.S | 39 ++++++------ arch/powerpc/kernel/head_64.S | 110 +++++++++++++++++++++++---------- arch/powerpc/kernel/idle_power4.S | 8 ++- arch/powerpc/kernel/irq.c | 24 ++++++- arch/powerpc/kernel/ppc_ksyms.c | 4 ++ arch/powerpc/kernel/setup_64.c | 4 +- arch/powerpc/platforms/iseries/ksyms.c | 6 -- arch/powerpc/platforms/iseries/misc.S | 35 +---------- 10 files changed, 137 insertions(+), 100 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/kernel/asm-offsets.c b/arch/powerpc/kernel/asm-offsets.c index d06f378597b..e96521530d2 100644 --- a/arch/powerpc/kernel/asm-offsets.c +++ b/arch/powerpc/kernel/asm-offsets.c @@ -118,7 +118,8 @@ int main(void) DEFINE(PACASTABRR, offsetof(struct paca_struct, stab_rr)); DEFINE(PACAR1, offsetof(struct paca_struct, saved_r1)); DEFINE(PACATOC, offsetof(struct paca_struct, kernel_toc)); - DEFINE(PACAPROCENABLED, offsetof(struct paca_struct, proc_enabled)); + DEFINE(PACASOFTIRQEN, offsetof(struct paca_struct, soft_enabled)); + DEFINE(PACAHARDIRQEN, offsetof(struct paca_struct, hard_enabled)); DEFINE(PACASLBCACHE, offsetof(struct paca_struct, slb_cache)); DEFINE(PACASLBCACHEPTR, offsetof(struct paca_struct, slb_cache_ptr)); DEFINE(PACACONTEXTID, offsetof(struct paca_struct, context.id)); diff --git a/arch/powerpc/kernel/crash.c b/arch/powerpc/kernel/crash.c index 1af41f7616d..89b03c8da9d 100644 --- a/arch/powerpc/kernel/crash.c +++ b/arch/powerpc/kernel/crash.c @@ -111,7 +111,7 @@ void crash_ipi_callback(struct pt_regs *regs) if (!cpu_online(cpu)) return; - local_irq_disable(); + hard_irq_disable(); if (!cpu_isset(cpu, cpus_in_crash)) crash_save_this_cpu(regs, cpu); cpu_set(cpu, cpus_in_crash); @@ -289,7 +289,7 @@ void default_machine_crash_shutdown(struct pt_regs *regs) * an SMP system. * The kernel is broken so disable interrupts. */ - local_irq_disable(); + hard_irq_disable(); for_each_irq(irq) { struct irq_desc *desc = irq_desc + irq; diff --git a/arch/powerpc/kernel/entry_64.S b/arch/powerpc/kernel/entry_64.S index 748e74fcf54..efda48741b2 100644 --- a/arch/powerpc/kernel/entry_64.S +++ b/arch/powerpc/kernel/entry_64.S @@ -87,6 +87,10 @@ system_call_common: addi r9,r1,STACK_FRAME_OVERHEAD ld r11,exception_marker@toc(r2) std r11,-16(r9) /* "regshere" marker */ + li r10,1 + stb r10,PACASOFTIRQEN(r13) + stb r10,PACAHARDIRQEN(r13) + std r10,SOFTE(r1) #ifdef CONFIG_PPC_ISERIES BEGIN_FW_FTR_SECTION /* Hack for handling interrupts when soft-enabling on iSeries */ @@ -94,8 +98,6 @@ BEGIN_FW_FTR_SECTION andi. r10,r12,MSR_PR /* from kernel */ crand 4*cr0+eq,4*cr1+eq,4*cr0+eq beq hardware_interrupt_entry - lbz r10,PACAPROCENABLED(r13) - std r10,SOFTE(r1) END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES) #endif mfmsr r11 @@ -460,9 +462,9 @@ _GLOBAL(ret_from_except_lite) #endif restore: + ld r5,SOFTE(r1) #ifdef CONFIG_PPC_ISERIES BEGIN_FW_FTR_SECTION - ld r5,SOFTE(r1) cmpdi 0,r5,0 beq 4f /* Check for pending interrupts (iSeries) */ @@ -472,16 +474,16 @@ BEGIN_FW_FTR_SECTION beq+ 4f /* skip do_IRQ if no interrupts */ li r3,0 - stb r3,PACAPROCENABLED(r13) /* ensure we are soft-disabled */ + stb r3,PACASOFTIRQEN(r13) /* ensure we are soft-disabled */ ori r10,r10,MSR_EE mtmsrd r10 /* hard-enable again */ addi r3,r1,STACK_FRAME_OVERHEAD bl .do_IRQ b .ret_from_except_lite /* loop back and handle more */ - -4: stb r5,PACAPROCENABLED(r13) +4: END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES) #endif + stb r5,PACASOFTIRQEN(r13) ld r3,_MSR(r1) andi. r0,r3,MSR_RI @@ -538,25 +540,15 @@ do_work: /* Check that preempt_count() == 0 and interrupts are enabled */ lwz r8,TI_PREEMPT(r9) cmpwi cr1,r8,0 -#ifdef CONFIG_PPC_ISERIES -BEGIN_FW_FTR_SECTION ld r0,SOFTE(r1) cmpdi r0,0 -END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES) -#endif -BEGIN_FW_FTR_SECTION - andi. r0,r3,MSR_EE -END_FW_FTR_SECTION_IFCLR(FW_FEATURE_ISERIES) crandc eq,cr1*4+eq,eq bne restore /* here we are preempting the current task */ 1: -#ifdef CONFIG_PPC_ISERIES -BEGIN_FW_FTR_SECTION li r0,1 - stb r0,PACAPROCENABLED(r13) -END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES) -#endif + stb r0,PACASOFTIRQEN(r13) + stb r0,PACAHARDIRQEN(r13) ori r10,r10,MSR_EE mtmsrd r10,1 /* reenable interrupts */ bl .preempt_schedule @@ -639,8 +631,7 @@ _GLOBAL(enter_rtas) /* There is no way it is acceptable to get here with interrupts enabled, * check it with the asm equivalent of WARN_ON */ - mfmsr r6 - andi. r0,r6,MSR_EE + lbz r0,PACASOFTIRQEN(r13) 1: tdnei r0,0 .section __bug_table,"a" .llong 1b,__LINE__ + 0x1000000, 1f, 2f @@ -649,7 +640,13 @@ _GLOBAL(enter_rtas) 1: .asciz __FILE__ 2: .asciz "enter_rtas" .previous - + + /* Hard-disable interrupts */ + mfmsr r6 + rldicl r7,r6,48,1 + rotldi r7,r7,16 + mtmsrd r7,1 + /* Unfortunately, the stack pointer and the MSR are also clobbered, * so they are saved in the PACA which allows us to restore * our original state after RTAS returns. diff --git a/arch/powerpc/kernel/head_64.S b/arch/powerpc/kernel/head_64.S index 645c7f10fb2..c93d9f35a12 100644 --- a/arch/powerpc/kernel/head_64.S +++ b/arch/powerpc/kernel/head_64.S @@ -35,9 +35,7 @@ #include #include -#ifdef CONFIG_PPC_ISERIES #define DO_SOFT_DISABLE -#endif /* * We layout physical memory as follows: @@ -308,7 +306,9 @@ exception_marker: std r9,_LINK(r1); \ mfctr r10; /* save CTR in stackframe */ \ std r10,_CTR(r1); \ + lbz r10,PACASOFTIRQEN(r13); \ mfspr r11,SPRN_XER; /* save XER in stackframe */ \ + std r10,SOFTE(r1); \ std r11,_XER(r1); \ li r9,(n)+1; \ std r9,_TRAP(r1); /* set trap number */ \ @@ -343,6 +343,34 @@ label##_pSeries: \ EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, label##_common) +#define MASKABLE_EXCEPTION_PSERIES(n, label) \ + . = n; \ + .globl label##_pSeries; \ +label##_pSeries: \ + HMT_MEDIUM; \ + mtspr SPRN_SPRG1,r13; /* save r13 */ \ + mfspr r13,SPRN_SPRG3; /* get paca address into r13 */ \ + std r9,PACA_EXGEN+EX_R9(r13); /* save r9, r10 */ \ + std r10,PACA_EXGEN+EX_R10(r13); \ + lbz r10,PACASOFTIRQEN(r13); \ + mfcr r9; \ + cmpwi r10,0; \ + beq masked_interrupt; \ + mfspr r10,SPRN_SPRG1; \ + std r10,PACA_EXGEN+EX_R13(r13); \ + std r11,PACA_EXGEN+EX_R11(r13); \ + std r12,PACA_EXGEN+EX_R12(r13); \ + clrrdi r12,r13,32; /* get high part of &label */ \ + mfmsr r10; \ + mfspr r11,SPRN_SRR0; /* save SRR0 */ \ + LOAD_HANDLER(r12,label##_common) \ + ori r10,r10,MSR_IR|MSR_DR|MSR_RI; \ + mtspr SPRN_SRR0,r12; \ + mfspr r12,SPRN_SRR1; /* and SRR1 */ \ + mtspr SPRN_SRR1,r10; \ + rfid; \ + b . /* prevent speculative execution */ + #define STD_EXCEPTION_ISERIES(n, label, area) \ .globl label##_iSeries; \ label##_iSeries: \ @@ -358,40 +386,32 @@ label##_iSeries: \ HMT_MEDIUM; \ mtspr SPRN_SPRG1,r13; /* save r13 */ \ EXCEPTION_PROLOG_ISERIES_1(PACA_EXGEN); \ - lbz r10,PACAPROCENABLED(r13); \ + lbz r10,PACASOFTIRQEN(r13); \ cmpwi 0,r10,0; \ beq- label##_iSeries_masked; \ EXCEPTION_PROLOG_ISERIES_2; \ b label##_common; \ -#ifdef DO_SOFT_DISABLE +#ifdef CONFIG_PPC_ISERIES #define DISABLE_INTS \ -BEGIN_FW_FTR_SECTION; \ - lbz r10,PACAPROCENABLED(r13); \ li r11,0; \ - std r10,SOFTE(r1); \ + stb r11,PACASOFTIRQEN(r13); \ +BEGIN_FW_FTR_SECTION; \ + stb r11,PACAHARDIRQEN(r13); \ +END_FW_FTR_SECTION_IFCLR(FW_FEATURE_ISERIES); \ +BEGIN_FW_FTR_SECTION; \ mfmsr r10; \ - stb r11,PACAPROCENABLED(r13); \ ori r10,r10,MSR_EE; \ mtmsrd r10,1; \ END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES) -#define ENABLE_INTS \ -BEGIN_FW_FTR_SECTION; \ - lbz r10,PACAPROCENABLED(r13); \ - mfmsr r11; \ - std r10,SOFTE(r1); \ - ori r11,r11,MSR_EE; \ -END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES); \ -BEGIN_FW_FTR_SECTION; \ - ld r12,_MSR(r1); \ - mfmsr r11; \ - rlwimi r11,r12,0,MSR_EE; \ -END_FW_FTR_SECTION_IFCLR(FW_FEATURE_ISERIES); \ - mtmsrd r11,1 +#else +#define DISABLE_INTS \ + li r11,0; \ + stb r11,PACASOFTIRQEN(r13); \ + stb r11,PACAHARDIRQEN(r13) -#else /* hard enable/disable interrupts */ -#define DISABLE_INTS +#endif /* CONFIG_PPC_ISERIES */ #define ENABLE_INTS \ ld r12,_MSR(r1); \ @@ -399,8 +419,6 @@ END_FW_FTR_SECTION_IFCLR(FW_FEATURE_ISERIES); \ rlwimi r11,r12,0,MSR_EE; \ mtmsrd r11,1 -#endif - #define STD_EXCEPTION_COMMON(trap, label, hdlr) \ .align 7; \ .globl label##_common; \ @@ -541,11 +559,11 @@ instruction_access_slb_pSeries: mfspr r12,SPRN_SRR1 /* and SRR1 */ b .slb_miss_realmode /* Rel. branch works in real mode */ - STD_EXCEPTION_PSERIES(0x500, hardware_interrupt) + MASKABLE_EXCEPTION_PSERIES(0x500, hardware_interrupt) STD_EXCEPTION_PSERIES(0x600, alignment) STD_EXCEPTION_PSERIES(0x700, program_check) STD_EXCEPTION_PSERIES(0x800, fp_unavailable) - STD_EXCEPTION_PSERIES(0x900, decrementer) + MASKABLE_EXCEPTION_PSERIES(0x900, decrementer) STD_EXCEPTION_PSERIES(0xa00, trap_0a) STD_EXCEPTION_PSERIES(0xb00, trap_0b) @@ -597,7 +615,24 @@ system_call_pSeries: /*** pSeries interrupt support ***/ /* moved from 0xf00 */ - STD_EXCEPTION_PSERIES(., performance_monitor) + MASKABLE_EXCEPTION_PSERIES(., performance_monitor) + +/* + * An interrupt came in while soft-disabled; clear EE in SRR1, + * clear paca->hard_enabled and return. + */ +masked_interrupt: + stb r10,PACAHARDIRQEN(r13) + mtcrf 0x80,r9 + ld r9,PACA_EXGEN+EX_R9(r13) + mfspr r10,SPRN_SRR1 + rldicl r10,r10,48,1 /* clear MSR_EE */ + rotldi r10,r10,16 + mtspr SPRN_SRR1,r10 + ld r10,PACA_EXGEN+EX_R10(r13) + mfspr r13,SPRN_SPRG1 + rfid + b . .align 7 _GLOBAL(do_stab_bolted_pSeries) @@ -952,7 +987,8 @@ fast_exception_return: REST_8GPRS(2, r1) mfmsr r10 - clrrdi r10,r10,2 /* clear RI (LE is 0 already) */ + rldicl r10,r10,48,1 /* clear EE */ + rldicr r10,r10,16,61 /* clear RI (LE is 0 already) */ mtmsrd r10,1 mtspr SPRN_SRR1,r12 @@ -1877,11 +1913,16 @@ _GLOBAL(__secondary_start) /* enable MMU and jump to start_secondary */ LOAD_REG_ADDR(r3, .start_secondary_prolog) LOAD_REG_IMMEDIATE(r4, MSR_KERNEL) -#ifdef DO_SOFT_DISABLE +#ifdef CONFIG_PPC_ISERIES BEGIN_FW_FTR_SECTION ori r4,r4,MSR_EE END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES) #endif +BEGIN_FW_FTR_SECTION + stb r7,PACASOFTIRQEN(r13) + stb r7,PACAHARDIRQEN(r13) +END_FW_FTR_SECTION_IFCLR(FW_FEATURE_ISERIES) + mtspr SPRN_SRR0,r3 mtspr SPRN_SRR1,r4 rfid @@ -2019,15 +2060,18 @@ _STATIC(start_here_common) /* Load up the kernel context */ 5: -#ifdef DO_SOFT_DISABLE -BEGIN_FW_FTR_SECTION li r5,0 - stb r5,PACAPROCENABLED(r13) /* Soft Disabled */ + stb r5,PACASOFTIRQEN(r13) /* Soft Disabled */ +#ifdef CONFIG_PPC_ISERIES +BEGIN_FW_FTR_SECTION mfmsr r5 ori r5,r5,MSR_EE /* Hard Enabled */ mtmsrd r5 END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES) #endif +BEGIN_FW_FTR_SECTION + stb r5,PACAHARDIRQEN(r13) +END_FW_FTR_SECTION_IFCLR(FW_FEATURE_ISERIES) bl .start_kernel diff --git a/arch/powerpc/kernel/idle_power4.S b/arch/powerpc/kernel/idle_power4.S index 30de81da7b4..ba319547860 100644 --- a/arch/powerpc/kernel/idle_power4.S +++ b/arch/powerpc/kernel/idle_power4.S @@ -30,6 +30,13 @@ END_FTR_SECTION_IFCLR(CPU_FTR_CAN_NAP) beqlr /* Go to NAP now */ + mfmsr r7 + rldicl r0,r7,48,1 + rotldi r0,r0,16 + mtmsrd r0,1 /* hard-disable interrupts */ + li r0,1 + stb r0,PACASOFTIRQEN(r13) /* we'll hard-enable shortly */ + stb r0,PACAHARDIRQEN(r13) BEGIN_FTR_SECTION DSSALL sync @@ -38,7 +45,6 @@ END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC) ld r8,TI_LOCAL_FLAGS(r9) /* set napping bit */ ori r8,r8,_TLF_NAPPING /* so when we take an exception */ std r8,TI_LOCAL_FLAGS(r9) /* it will return to our caller */ - mfmsr r7 ori r7,r7,MSR_EE oris r7,r7,MSR_POW@h 1: sync diff --git a/arch/powerpc/kernel/irq.c b/arch/powerpc/kernel/irq.c index 5e37bf14ef2..67b21a008f6 100644 --- a/arch/powerpc/kernel/irq.c +++ b/arch/powerpc/kernel/irq.c @@ -64,8 +64,9 @@ #include #include #include -#ifdef CONFIG_PPC_ISERIES +#ifdef CONFIG_PPC64 #include +#include #endif int __irq_offset_value; @@ -95,6 +96,27 @@ extern atomic_t ipi_sent; EXPORT_SYMBOL(irq_desc); int distribute_irqs = 1; + +void local_irq_restore(unsigned long en) +{ + get_paca()->soft_enabled = en; + if (!en) + return; + + if (firmware_has_feature(FW_FEATURE_ISERIES)) { + if (get_paca()->lppaca_ptr->int_dword.any_int) + iseries_handle_interrupts(); + return; + } + + if (get_paca()->hard_enabled) + return; + /* need to hard-enable interrupts here */ + get_paca()->hard_enabled = en; + if ((int)mfspr(SPRN_DEC) < 0) + mtspr(SPRN_DEC, 1); + hard_irq_enable(); +} #endif /* CONFIG_PPC64 */ int show_interrupts(struct seq_file *p, void *v) diff --git a/arch/powerpc/kernel/ppc_ksyms.c b/arch/powerpc/kernel/ppc_ksyms.c index 807193a3c78..9179f0739ea 100644 --- a/arch/powerpc/kernel/ppc_ksyms.c +++ b/arch/powerpc/kernel/ppc_ksyms.c @@ -49,6 +49,10 @@ #include #endif +#ifdef CONFIG_PPC64 +EXPORT_SYMBOL(local_irq_restore); +#endif + #ifdef CONFIG_PPC32 extern void transfer_to_handler(void); extern void do_IRQ(struct pt_regs *regs); diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c index 4b2e32eab9d..b1b0cda3f74 100644 --- a/arch/powerpc/kernel/setup_64.c +++ b/arch/powerpc/kernel/setup_64.c @@ -223,8 +223,8 @@ void early_setup_secondary(void) { struct paca_struct *lpaca = get_paca(); - /* Mark enabled in PACA */ - lpaca->proc_enabled = 0; + /* Mark interrupts enabled in PACA */ + lpaca->soft_enabled = 0; /* Initialize hash table for that CPU */ htab_initialize_secondary(); diff --git a/arch/powerpc/platforms/iseries/ksyms.c b/arch/powerpc/platforms/iseries/ksyms.c index a2200842f4e..2430848b98e 100644 --- a/arch/powerpc/platforms/iseries/ksyms.c +++ b/arch/powerpc/platforms/iseries/ksyms.c @@ -19,9 +19,3 @@ EXPORT_SYMBOL(HvCall4); EXPORT_SYMBOL(HvCall5); EXPORT_SYMBOL(HvCall6); EXPORT_SYMBOL(HvCall7); - -#ifdef CONFIG_SMP -EXPORT_SYMBOL(local_get_flags); -EXPORT_SYMBOL(local_irq_disable); -EXPORT_SYMBOL(local_irq_restore); -#endif diff --git a/arch/powerpc/platforms/iseries/misc.S b/arch/powerpc/platforms/iseries/misc.S index 7641fc7e550..2c6ff0fdac9 100644 --- a/arch/powerpc/platforms/iseries/misc.S +++ b/arch/powerpc/platforms/iseries/misc.S @@ -19,39 +19,8 @@ .text -/* unsigned long local_save_flags(void) */ -_GLOBAL(local_get_flags) - lbz r3,PACAPROCENABLED(r13) - blr - -/* unsigned long local_irq_disable(void) */ -_GLOBAL(local_irq_disable) - lbz r3,PACAPROCENABLED(r13) - li r4,0 - stb r4,PACAPROCENABLED(r13) - blr /* Done */ - -/* void local_irq_restore(unsigned long flags) */ -_GLOBAL(local_irq_restore) - lbz r5,PACAPROCENABLED(r13) - /* Check if things are setup the way we want _already_. */ - cmpw 0,r3,r5 - beqlr - /* are we enabling interrupts? */ - cmpdi 0,r3,0 - stb r3,PACAPROCENABLED(r13) - beqlr - /* Check pending interrupts */ - /* A decrementer, IPI or PMC interrupt may have occurred - * while we were in the hypervisor (which enables) */ - ld r4,PACALPPACAPTR(r13) - ld r4,LPPACAANYINT(r4) - cmpdi r4,0 - beqlr - - /* - * Handle pending interrupts in interrupt context - */ +/* Handle pending interrupts in interrupt context */ +_GLOBAL(iseries_handle_interrupts) li r0,0x5555 sc blr -- cgit v1.2.3-70-g09d2 From 5b43d20a4d12d94f258bbbca5fa4df8ff8a17848 Mon Sep 17 00:00:00 2001 From: Olof Johansson Date: Wed, 4 Oct 2006 23:41:41 -0500 Subject: [POWERPC] powerpc: Enable DEEPNAP power savings mode on 970MP Without this patch, on an idle system I get: cpu-power-0:21.638 cpu-power-1:27.102 cpu-power-2:29.343 cpu-power-3:25.784 Total: 103.8W With this patch: cpu-power-0:11.730 cpu-power-1:17.185 cpu-power-2:18.547 cpu-power-3:17.528 Total: 65.0W If I lower HZ to 100, I can get it as low as: cpu-power-0:10.938 cpu-power-1:16.021 cpu-power-2:17.245 cpu-power-3:16.145 Total: 60.2W Another (older) Quad G5 went from 54W to 39W at HZ=250. Coming back out of Deep Nap takes 40-70 cycles longer than coming back from just Nap (which already takes quite a while). I don't think it'll be a performance issue (interrupt latency on an idle system), but in case someone does measurements feel free to report them. Signed-off-by: Olof Johansson Acked-by: Michael Buesch Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/cpu_setup_ppc970.S | 16 ++++++++++++++++ arch/powerpc/kernel/cputable.c | 3 ++- 2 files changed, 18 insertions(+), 1 deletion(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/kernel/cpu_setup_ppc970.S b/arch/powerpc/kernel/cpu_setup_ppc970.S index 652594891d5..bf118c38575 100644 --- a/arch/powerpc/kernel/cpu_setup_ppc970.S +++ b/arch/powerpc/kernel/cpu_setup_ppc970.S @@ -83,6 +83,22 @@ _GLOBAL(__setup_cpu_ppc970) rldimi r0,r11,52,8 /* set NAP and DPM */ li r11,0 rldimi r0,r11,32,31 /* clear EN_ATTN */ + b load_hids /* Jump to shared code */ + + +_GLOBAL(__setup_cpu_ppc970MP) + /* Do nothing if not running in HV mode */ + mfmsr r0 + rldicl. r0,r0,4,63 + beqlr + + mfspr r0,SPRN_HID0 + li r11,0x15 /* clear DOZE and SLEEP */ + rldimi r0,r11,52,6 /* set DEEPNAP, NAP and DPM */ + li r11,0 + rldimi r0,r11,32,31 /* clear EN_ATTN */ + +load_hids: mtspr SPRN_HID0,r0 mfspr r0,SPRN_HID0 mfspr r0,SPRN_HID0 diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c index 95382f99440..f02b402c66d 100644 --- a/arch/powerpc/kernel/cputable.c +++ b/arch/powerpc/kernel/cputable.c @@ -41,6 +41,7 @@ extern void __setup_cpu_745x(unsigned long offset, struct cpu_spec* spec); #endif /* CONFIG_PPC32 */ #ifdef CONFIG_PPC64 extern void __setup_cpu_ppc970(unsigned long offset, struct cpu_spec* spec); +extern void __setup_cpu_ppc970MP(unsigned long offset, struct cpu_spec* spec); extern void __restore_cpu_ppc970(void); #endif /* CONFIG_PPC64 */ @@ -221,7 +222,7 @@ struct cpu_spec cpu_specs[] = { .icache_bsize = 128, .dcache_bsize = 128, .num_pmcs = 8, - .cpu_setup = __setup_cpu_ppc970, + .cpu_setup = __setup_cpu_ppc970MP, .cpu_restore = __restore_cpu_ppc970, .oprofile_cpu_type = "ppc64/970", .oprofile_type = PPC_OPROFILE_POWER4, -- cgit v1.2.3-70-g09d2 From 0f03a43b8f0fc221986a46654282ec6a1e8c6d45 Mon Sep 17 00:00:00 2001 From: David Gibson Date: Tue, 3 Oct 2006 16:57:44 +1000 Subject: [POWERPC] Remove todc code from ARCH=powerpc Apparently we've copied the todc drivers, for various RTCs used in embedded machines from ARCH=ppc to ARCH=powerpc, despite the fact that it's never used in the latter. This patch removes it. If we ever need these drivers (which we probably shouldn't now the RTC class stuff is in), we can transfer them one by one from ARCH=ppc, removing from the hideous abomination which is the todc "infrastructure". Signed-off-by: David Gibson Signed-off-by: Paul Mackerras --- arch/powerpc/Kconfig | 6 - arch/powerpc/sysdev/Makefile | 1 - arch/powerpc/sysdev/todc.c | 392 ---------------------------------- include/asm-powerpc/todc.h | 487 ------------------------------------------- 4 files changed, 886 deletions(-) delete mode 100644 arch/powerpc/sysdev/todc.c delete mode 100644 include/asm-powerpc/todc.h (limited to 'arch/powerpc') diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index 8b691046557..7107d472413 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -594,12 +594,6 @@ config TAU_AVERAGE If in doubt, say N here. -config PPC_TODC - depends on EMBEDDED6xx - bool "Generic Time-of-day Clock (TODC) support" - ---help--- - This adds support for many TODC/RTC chips. - endmenu source arch/powerpc/platforms/embedded6xx/Kconfig diff --git a/arch/powerpc/sysdev/Makefile b/arch/powerpc/sysdev/Makefile index 91f052d8cce..f15af0e82f1 100644 --- a/arch/powerpc/sysdev/Makefile +++ b/arch/powerpc/sysdev/Makefile @@ -10,7 +10,6 @@ obj-$(CONFIG_40x) += dcr.o obj-$(CONFIG_U3_DART) += dart_iommu.o obj-$(CONFIG_MMIO_NVRAM) += mmio_nvram.o obj-$(CONFIG_FSL_SOC) += fsl_soc.o -obj-$(CONFIG_PPC_TODC) += todc.o obj-$(CONFIG_TSI108_BRIDGE) += tsi108_pci.o tsi108_dev.o obj-$(CONFIG_QUICC_ENGINE) += qe_lib/ diff --git a/arch/powerpc/sysdev/todc.c b/arch/powerpc/sysdev/todc.c deleted file mode 100644 index 0a65980efb5..00000000000 --- a/arch/powerpc/sysdev/todc.c +++ /dev/null @@ -1,392 +0,0 @@ -/* - * Time of Day Clock support for the M48T35, M48T37, M48T59, and MC146818 - * Real Time Clocks/Timekeepers. - * - * Author: Mark A. Greer - * - * 2001-2004 (c) MontaVista, Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include - -/* - * Depending on the hardware on your board and your board design, the - * RTC/NVRAM may be accessed either directly (like normal memory) or via - * address/data registers. If your board uses the direct method, set - * 'nvram_data' to the base address of your nvram and leave 'nvram_as0' and - * 'nvram_as1' NULL. If your board uses address/data regs to access nvram, - * set 'nvram_as0' to the address of the lower byte, set 'nvram_as1' to the - * address of the upper byte (leave NULL if using mc146818), and set - * 'nvram_data' to the address of the 8-bit data register. - * - * Note: Even though the documentation for the various RTC chips say that it - * take up to a second before it starts updating once the 'R' bit is - * cleared, they always seem to update even though we bang on it many - * times a second. This is true, except for the Dallas Semi 1746/1747 - * (possibly others). Those chips seem to have a real problem whenever - * we set the 'R' bit before reading them, they basically stop counting. - * --MAG - */ - -/* - * 'todc_info' should be initialized in your *_setup.c file to - * point to a fully initialized 'todc_info_t' structure. - * This structure holds all the register offsets for your particular - * TODC/RTC chip. - * TODC_ALLOC()/TODC_INIT() will allocate and initialize this table for you. - */ - -#ifdef RTC_FREQ_SELECT -#undef RTC_FREQ_SELECT -#define RTC_FREQ_SELECT control_b /* Register A */ -#endif - -#ifdef RTC_CONTROL -#undef RTC_CONTROL -#define RTC_CONTROL control_a /* Register B */ -#endif - -#ifdef RTC_INTR_FLAGS -#undef RTC_INTR_FLAGS -#define RTC_INTR_FLAGS watchdog /* Register C */ -#endif - -#ifdef RTC_VALID -#undef RTC_VALID -#define RTC_VALID interrupts /* Register D */ -#endif - -/* Access routines when RTC accessed directly (like normal memory) */ -u_char -todc_direct_read_val(int addr) -{ - return readb((void __iomem *)(todc_info->nvram_data + addr)); -} - -void -todc_direct_write_val(int addr, unsigned char val) -{ - writeb(val, (void __iomem *)(todc_info->nvram_data + addr)); - return; -} - -/* Access routines for accessing m48txx type chips via addr/data regs */ -u_char -todc_m48txx_read_val(int addr) -{ - outb(addr, todc_info->nvram_as0); - outb(addr>>todc_info->as0_bits, todc_info->nvram_as1); - return inb(todc_info->nvram_data); -} - -void -todc_m48txx_write_val(int addr, unsigned char val) -{ - outb(addr, todc_info->nvram_as0); - outb(addr>>todc_info->as0_bits, todc_info->nvram_as1); - outb(val, todc_info->nvram_data); - return; -} - -/* Access routines for accessing mc146818 type chips via addr/data regs */ -u_char -todc_mc146818_read_val(int addr) -{ - outb_p(addr, todc_info->nvram_as0); - return inb_p(todc_info->nvram_data); -} - -void -todc_mc146818_write_val(int addr, unsigned char val) -{ - outb_p(addr, todc_info->nvram_as0); - outb_p(val, todc_info->nvram_data); -} - - -/* - * Routines to make RTC chips with NVRAM buried behind an addr/data pair - * have the NVRAM and clock regs appear at the same level. - * The NVRAM will appear to start at addr 0 and the clock regs will appear - * to start immediately after the NVRAM (actually, start at offset - * todc_info->nvram_size). - */ -static inline u_char -todc_read_val(int addr) -{ - u_char val; - - if (todc_info->sw_flags & TODC_FLAG_2_LEVEL_NVRAM) { - if (addr < todc_info->nvram_size) { /* NVRAM */ - ppc_md.rtc_write_val(todc_info->nvram_addr_reg, addr); - val = ppc_md.rtc_read_val(todc_info->nvram_data_reg); - } else { /* Clock Reg */ - addr -= todc_info->nvram_size; - val = ppc_md.rtc_read_val(addr); - } - } else - val = ppc_md.rtc_read_val(addr); - - return val; -} - -static inline void -todc_write_val(int addr, u_char val) -{ - if (todc_info->sw_flags & TODC_FLAG_2_LEVEL_NVRAM) { - if (addr < todc_info->nvram_size) { /* NVRAM */ - ppc_md.rtc_write_val(todc_info->nvram_addr_reg, addr); - ppc_md.rtc_write_val(todc_info->nvram_data_reg, val); - } else { /* Clock Reg */ - addr -= todc_info->nvram_size; - ppc_md.rtc_write_val(addr, val); - } - } else - ppc_md.rtc_write_val(addr, val); -} - -/* - * TODC routines - * - * There is some ugly stuff in that there are assumptions for the mc146818. - * - * Assumptions: - * - todc_info->control_a has the offset as mc146818 Register B reg - * - todc_info->control_b has the offset as mc146818 Register A reg - * - m48txx control reg's write enable or 'W' bit is same as - * mc146818 Register B 'SET' bit (i.e., 0x80) - * - * These assumptions were made to make the code simpler. - */ -long __init -todc_time_init(void) -{ - u_char cntl_b; - - if (!ppc_md.rtc_read_val) - ppc_md.rtc_read_val = ppc_md.nvram_read_val; - if (!ppc_md.rtc_write_val) - ppc_md.rtc_write_val = ppc_md.nvram_write_val; - - cntl_b = todc_read_val(todc_info->control_b); - - if (todc_info->rtc_type == TODC_TYPE_MC146818) { - if ((cntl_b & 0x70) != 0x20) { - printk(KERN_INFO "TODC real-time-clock was stopped." - " Now starting..."); - cntl_b &= ~0x70; - cntl_b |= 0x20; - } - - todc_write_val(todc_info->control_b, cntl_b); - } else if (todc_info->rtc_type == TODC_TYPE_DS17285) { - u_char mode; - - mode = todc_read_val(TODC_TYPE_DS17285_CNTL_A); - /* Make sure countdown clear is not set */ - mode &= ~0x40; - /* Enable oscillator, extended register set */ - mode |= 0x30; - todc_write_val(TODC_TYPE_DS17285_CNTL_A, mode); - - } else if (todc_info->rtc_type == TODC_TYPE_DS1501) { - u_char month; - - todc_info->enable_read = TODC_DS1501_CNTL_B_TE; - todc_info->enable_write = TODC_DS1501_CNTL_B_TE; - - month = todc_read_val(todc_info->month); - - if ((month & 0x80) == 0x80) { - printk(KERN_INFO "TODC %s %s\n", - "real-time-clock was stopped.", - "Now starting..."); - month &= ~0x80; - todc_write_val(todc_info->month, month); - } - - cntl_b &= ~TODC_DS1501_CNTL_B_TE; - todc_write_val(todc_info->control_b, cntl_b); - } else { /* must be a m48txx type */ - u_char cntl_a; - - todc_info->enable_read = TODC_MK48TXX_CNTL_A_R; - todc_info->enable_write = TODC_MK48TXX_CNTL_A_W; - - cntl_a = todc_read_val(todc_info->control_a); - - /* Check & clear STOP bit in control B register */ - if (cntl_b & TODC_MK48TXX_DAY_CB) { - printk(KERN_INFO "TODC %s %s\n", - "real-time-clock was stopped.", - "Now starting..."); - - cntl_a |= todc_info->enable_write; - cntl_b &= ~TODC_MK48TXX_DAY_CB;/* Start Oscil */ - - todc_write_val(todc_info->control_a, cntl_a); - todc_write_val(todc_info->control_b, cntl_b); - } - - /* Make sure READ & WRITE bits are cleared. */ - cntl_a &= ~(todc_info->enable_write | todc_info->enable_read); - todc_write_val(todc_info->control_a, cntl_a); - } - - return 0; -} - -/* - * There is some ugly stuff in that there are assumptions that for a mc146818, - * the todc_info->control_a has the offset of the mc146818 Register B reg and - * that the register'ss 'SET' bit is the same as the m48txx's write enable - * bit in the control register of the m48txx (i.e., 0x80). - * - * It was done to make the code look simpler. - */ -void -todc_get_rtc_time(struct rtc_time *tm) -{ - uint year = 0, mon = 0, mday = 0, hour = 0, min = 0, sec = 0; - uint limit, i; - u_char save_control, uip = 0; - extern void GregorianDay(struct rtc_time *); - - spin_lock(&rtc_lock); - save_control = todc_read_val(todc_info->control_a); - - if (todc_info->rtc_type != TODC_TYPE_MC146818) { - limit = 1; - - switch (todc_info->rtc_type) { - case TODC_TYPE_DS1553: - case TODC_TYPE_DS1557: - case TODC_TYPE_DS1743: - case TODC_TYPE_DS1746: /* XXXX BAD HACK -> FIX */ - case TODC_TYPE_DS1747: - case TODC_TYPE_DS17285: - break; - default: - todc_write_val(todc_info->control_a, - (save_control | todc_info->enable_read)); - } - } else - limit = 100000000; - - for (i=0; irtc_type == TODC_TYPE_MC146818) - uip = todc_read_val(todc_info->RTC_FREQ_SELECT); - - sec = todc_read_val(todc_info->seconds) & 0x7f; - min = todc_read_val(todc_info->minutes) & 0x7f; - hour = todc_read_val(todc_info->hours) & 0x3f; - mday = todc_read_val(todc_info->day_of_month) & 0x3f; - mon = todc_read_val(todc_info->month) & 0x1f; - year = todc_read_val(todc_info->year) & 0xff; - - if (todc_info->rtc_type == TODC_TYPE_MC146818) { - uip |= todc_read_val(todc_info->RTC_FREQ_SELECT); - if ((uip & RTC_UIP) == 0) - break; - } - } - - if (todc_info->rtc_type != TODC_TYPE_MC146818) { - switch (todc_info->rtc_type) { - case TODC_TYPE_DS1553: - case TODC_TYPE_DS1557: - case TODC_TYPE_DS1743: - case TODC_TYPE_DS1746: /* XXXX BAD HACK -> FIX */ - case TODC_TYPE_DS1747: - case TODC_TYPE_DS17285: - break; - default: - save_control &= ~(todc_info->enable_read); - todc_write_val(todc_info->control_a, save_control); - } - } - spin_unlock(&rtc_lock); - - if ((todc_info->rtc_type != TODC_TYPE_MC146818) - || ((save_control & RTC_DM_BINARY) == 0) - || RTC_ALWAYS_BCD) { - BCD_TO_BIN(sec); - BCD_TO_BIN(min); - BCD_TO_BIN(hour); - BCD_TO_BIN(mday); - BCD_TO_BIN(mon); - BCD_TO_BIN(year); - } - - if ((year + 1900) < 1970) { - year += 100; - } - - tm->tm_sec = sec; - tm->tm_min = min; - tm->tm_hour = hour; - tm->tm_mday = mday; - tm->tm_mon = mon; - tm->tm_year = year; - - GregorianDay(tm); -} - -int -todc_set_rtc_time(struct rtc_time *tm) -{ - u_char save_control, save_freq_select = 0; - - spin_lock(&rtc_lock); - save_control = todc_read_val(todc_info->control_a); - - /* Assuming MK48T59_RTC_CA_WRITE & RTC_SET are equal */ - todc_write_val(todc_info->control_a, - (save_control | todc_info->enable_write)); - save_control &= ~(todc_info->enable_write); /* in case it was set */ - - if (todc_info->rtc_type == TODC_TYPE_MC146818) { - save_freq_select = todc_read_val(todc_info->RTC_FREQ_SELECT); - todc_write_val(todc_info->RTC_FREQ_SELECT, - save_freq_select | RTC_DIV_RESET2); - } - - if ((todc_info->rtc_type != TODC_TYPE_MC146818) - || ((save_control & RTC_DM_BINARY) == 0) - || RTC_ALWAYS_BCD) { - BIN_TO_BCD(tm->tm_sec); - BIN_TO_BCD(tm->tm_min); - BIN_TO_BCD(tm->tm_hour); - BIN_TO_BCD(tm->tm_mon); - BIN_TO_BCD(tm->tm_mday); - BIN_TO_BCD(tm->tm_year); - } - - todc_write_val(todc_info->seconds, tm->tm_sec); - todc_write_val(todc_info->minutes, tm->tm_min); - todc_write_val(todc_info->hours, tm->tm_hour); - todc_write_val(todc_info->month, tm->tm_mon); - todc_write_val(todc_info->day_of_month, tm->tm_mday); - todc_write_val(todc_info->year, tm->tm_year); - - todc_write_val(todc_info->control_a, save_control); - - if (todc_info->rtc_type == TODC_TYPE_MC146818) - todc_write_val(todc_info->RTC_FREQ_SELECT, save_freq_select); - - spin_unlock(&rtc_lock); - return 0; -} diff --git a/include/asm-powerpc/todc.h b/include/asm-powerpc/todc.h deleted file mode 100644 index 60a8c39b8c1..00000000000 --- a/include/asm-powerpc/todc.h +++ /dev/null @@ -1,487 +0,0 @@ -/* - * Definitions for the M48Txx and mc146818 series of Time of day/Real Time - * Clock chips. - * - * Author: Mark A. Greer - * - * 2001 (c) MontaVista, Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ - -/* - * Support for the M48T37/M48T59/.../mc146818 Real Time Clock chips. - * Purpose is to make one generic file that handles all of these chips instead - * of every platform implementing the same code over & over again. - */ - -#ifndef __PPC_KERNEL_TODC_H -#define __PPC_KERNEL_TODC_H - -typedef struct { - uint rtc_type; /* your particular chip */ - - /* - * Following are the addresses of the AS0, AS1, and DATA registers - * of these chips. Note that these are board-specific. - */ - unsigned int nvram_as0; - unsigned int nvram_as1; - unsigned int nvram_data; - - /* - * Define bits to stop external set of regs from changing so - * the chip can be read/written reliably. - */ - unsigned char enable_read; - unsigned char enable_write; - - /* - * Following is the number of AS0 address bits. This is normally - * 8 but some bad hardware routes address lines incorrectly. - */ - int as0_bits; - - int nvram_size; /* Size of NVRAM on chip */ - int sw_flags; /* Software control flags */ - - /* Following are the register offsets for the particular chip */ - int year; - int month; - int day_of_month; - int day_of_week; - int hours; - int minutes; - int seconds; - int control_b; - int control_a; - int watchdog; - int interrupts; - int alarm_date; - int alarm_hour; - int alarm_minutes; - int alarm_seconds; - int century; - int flags; - - /* - * Some RTC chips have their NVRAM buried behind a addr/data pair of - * regs on the first level/clock registers. The following fields - * are the addresses for those addr/data regs. - */ - int nvram_addr_reg; - int nvram_data_reg; -} todc_info_t; - -/* - * Define the types of TODC/RTC variants that are supported in - * arch/ppc/kernel/todc_time.c - * Make a new one of these for any chip somehow differs from what's already - * defined. That way, if you ever need to put in code to touch those - * bits/registers in todc_time.c, you can put it inside an - * 'if (todc_info->rtc_type == TODC_TYPE_XXX)' so you won't break - * anyone else. - */ -#define TODC_TYPE_MK48T35 1 -#define TODC_TYPE_MK48T37 2 -#define TODC_TYPE_MK48T59 3 -#define TODC_TYPE_DS1693 4 /* Dallas DS1693 RTC */ -#define TODC_TYPE_DS1743 5 /* Dallas DS1743 RTC */ -#define TODC_TYPE_DS1746 6 /* Dallas DS1746 RTC */ -#define TODC_TYPE_DS1747 7 /* Dallas DS1747 RTC */ -#define TODC_TYPE_DS1501 8 /* Dallas DS1501 RTC */ -#define TODC_TYPE_DS1643 9 /* Dallas DS1643 RTC */ -#define TODC_TYPE_PC97307 10 /* PC97307 internal RTC */ -#define TODC_TYPE_DS1557 11 /* Dallas DS1557 RTC */ -#define TODC_TYPE_DS17285 12 /* Dallas DS17285 RTC */ -#define TODC_TYPE_DS1553 13 /* Dallas DS1553 RTC */ -#define TODC_TYPE_MC146818 100 /* Leave room for m48txx's */ - -/* - * Bit to clear/set to enable reads/writes to the chip - */ -#define TODC_MK48TXX_CNTL_A_R 0x40 -#define TODC_MK48TXX_CNTL_A_W 0x80 -#define TODC_MK48TXX_DAY_CB 0x80 - -#define TODC_DS1501_CNTL_B_TE 0x80 - -/* - * Define flag bits used by todc routines. - */ -#define TODC_FLAG_2_LEVEL_NVRAM 0x00000001 - -/* - * Define the values for the various RTC's that should to into the todc_info - * table. - * Note: The XXX_NVRAM_SIZE, XXX_NVRAM_ADDR_REG, and XXX_NVRAM_DATA_REG only - * matter if XXX_SW_FLAGS has TODC_FLAG_2_LEVEL_NVRAM set. - */ -#define TODC_TYPE_MK48T35_NVRAM_SIZE 0x7ff8 -#define TODC_TYPE_MK48T35_SW_FLAGS 0 -#define TODC_TYPE_MK48T35_YEAR 0x7fff -#define TODC_TYPE_MK48T35_MONTH 0x7ffe -#define TODC_TYPE_MK48T35_DOM 0x7ffd /* Day of Month */ -#define TODC_TYPE_MK48T35_DOW 0x7ffc /* Day of Week */ -#define TODC_TYPE_MK48T35_HOURS 0x7ffb -#define TODC_TYPE_MK48T35_MINUTES 0x7ffa -#define TODC_TYPE_MK48T35_SECONDS 0x7ff9 -#define TODC_TYPE_MK48T35_CNTL_B 0x7ff9 -#define TODC_TYPE_MK48T35_CNTL_A 0x7ff8 -#define TODC_TYPE_MK48T35_WATCHDOG 0x0000 -#define TODC_TYPE_MK48T35_INTERRUPTS 0x0000 -#define TODC_TYPE_MK48T35_ALARM_DATE 0x0000 -#define TODC_TYPE_MK48T35_ALARM_HOUR 0x0000 -#define TODC_TYPE_MK48T35_ALARM_MINUTES 0x0000 -#define TODC_TYPE_MK48T35_ALARM_SECONDS 0x0000 -#define TODC_TYPE_MK48T35_CENTURY 0x0000 -#define TODC_TYPE_MK48T35_FLAGS 0x0000 -#define TODC_TYPE_MK48T35_NVRAM_ADDR_REG 0 -#define TODC_TYPE_MK48T35_NVRAM_DATA_REG 0 - -#define TODC_TYPE_MK48T37_NVRAM_SIZE 0x7ff0 -#define TODC_TYPE_MK48T37_SW_FLAGS 0 -#define TODC_TYPE_MK48T37_YEAR 0x7fff -#define TODC_TYPE_MK48T37_MONTH 0x7ffe -#define TODC_TYPE_MK48T37_DOM 0x7ffd /* Day of Month */ -#define TODC_TYPE_MK48T37_DOW 0x7ffc /* Day of Week */ -#define TODC_TYPE_MK48T37_HOURS 0x7ffb -#define TODC_TYPE_MK48T37_MINUTES 0x7ffa -#define TODC_TYPE_MK48T37_SECONDS 0x7ff9 -#define TODC_TYPE_MK48T37_CNTL_B 0x7ff9 -#define TODC_TYPE_MK48T37_CNTL_A 0x7ff8 -#define TODC_TYPE_MK48T37_WATCHDOG 0x7ff7 -#define TODC_TYPE_MK48T37_INTERRUPTS 0x7ff6 -#define TODC_TYPE_MK48T37_ALARM_DATE 0x7ff5 -#define TODC_TYPE_MK48T37_ALARM_HOUR 0x7ff4 -#define TODC_TYPE_MK48T37_ALARM_MINUTES 0x7ff3 -#define TODC_TYPE_MK48T37_ALARM_SECONDS 0x7ff2 -#define TODC_TYPE_MK48T37_CENTURY 0x7ff1 -#define TODC_TYPE_MK48T37_FLAGS 0x7ff0 -#define TODC_TYPE_MK48T37_NVRAM_ADDR_REG 0 -#define TODC_TYPE_MK48T37_NVRAM_DATA_REG 0 - -#define TODC_TYPE_MK48T59_NVRAM_SIZE 0x1ff0 -#define TODC_TYPE_MK48T59_SW_FLAGS 0 -#define TODC_TYPE_MK48T59_YEAR 0x1fff -#define TODC_TYPE_MK48T59_MONTH 0x1ffe -#define TODC_TYPE_MK48T59_DOM 0x1ffd /* Day of Month */ -#define TODC_TYPE_MK48T59_DOW 0x1ffc /* Day of Week */ -#define TODC_TYPE_MK48T59_HOURS 0x1ffb -#define TODC_TYPE_MK48T59_MINUTES 0x1ffa -#define TODC_TYPE_MK48T59_SECONDS 0x1ff9 -#define TODC_TYPE_MK48T59_CNTL_B 0x1ff9 -#define TODC_TYPE_MK48T59_CNTL_A 0x1ff8 -#define TODC_TYPE_MK48T59_WATCHDOG 0x1fff -#define TODC_TYPE_MK48T59_INTERRUPTS 0x1fff -#define TODC_TYPE_MK48T59_ALARM_DATE 0x1fff -#define TODC_TYPE_MK48T59_ALARM_HOUR 0x1fff -#define TODC_TYPE_MK48T59_ALARM_MINUTES 0x1fff -#define TODC_TYPE_MK48T59_ALARM_SECONDS 0x1fff -#define TODC_TYPE_MK48T59_CENTURY 0x1fff -#define TODC_TYPE_MK48T59_FLAGS 0x1fff -#define TODC_TYPE_MK48T59_NVRAM_ADDR_REG 0 -#define TODC_TYPE_MK48T59_NVRAM_DATA_REG 0 - -#define TODC_TYPE_DS1501_NVRAM_SIZE 0x100 -#define TODC_TYPE_DS1501_SW_FLAGS TODC_FLAG_2_LEVEL_NVRAM -#define TODC_TYPE_DS1501_YEAR (TODC_TYPE_DS1501_NVRAM_SIZE + 0x06) -#define TODC_TYPE_DS1501_MONTH (TODC_TYPE_DS1501_NVRAM_SIZE + 0x05) -#define TODC_TYPE_DS1501_DOM (TODC_TYPE_DS1501_NVRAM_SIZE + 0x04) -#define TODC_TYPE_DS1501_DOW (TODC_TYPE_DS1501_NVRAM_SIZE + 0x03) -#define TODC_TYPE_DS1501_HOURS (TODC_TYPE_DS1501_NVRAM_SIZE + 0x02) -#define TODC_TYPE_DS1501_MINUTES (TODC_TYPE_DS1501_NVRAM_SIZE + 0x01) -#define TODC_TYPE_DS1501_SECONDS (TODC_TYPE_DS1501_NVRAM_SIZE + 0x00) -#define TODC_TYPE_DS1501_CNTL_B (TODC_TYPE_DS1501_NVRAM_SIZE + 0x0f) -#define TODC_TYPE_DS1501_CNTL_A (TODC_TYPE_DS1501_NVRAM_SIZE + 0x0f) -#define TODC_TYPE_DS1501_WATCHDOG (TODC_TYPE_DS1501_NVRAM_SIZE + 0xff) -#define TODC_TYPE_DS1501_INTERRUPTS (TODC_TYPE_DS1501_NVRAM_SIZE + 0xff) -#define TODC_TYPE_DS1501_ALARM_DATE (TODC_TYPE_DS1501_NVRAM_SIZE + 0x0b) -#define TODC_TYPE_DS1501_ALARM_HOUR (TODC_TYPE_DS1501_NVRAM_SIZE + 0x0a) -#define TODC_TYPE_DS1501_ALARM_MINUTES (TODC_TYPE_DS1501_NVRAM_SIZE + 0x09) -#define TODC_TYPE_DS1501_ALARM_SECONDS (TODC_TYPE_DS1501_NVRAM_SIZE + 0x08) -#define TODC_TYPE_DS1501_CENTURY (TODC_TYPE_DS1501_NVRAM_SIZE + 0x07) -#define TODC_TYPE_DS1501_FLAGS (TODC_TYPE_DS1501_NVRAM_SIZE + 0xff) -#define TODC_TYPE_DS1501_NVRAM_ADDR_REG 0x10 -#define TODC_TYPE_DS1501_NVRAM_DATA_REG 0x13 - -#define TODC_TYPE_DS1553_NVRAM_SIZE 0x1ff0 -#define TODC_TYPE_DS1553_SW_FLAGS 0 -#define TODC_TYPE_DS1553_YEAR 0x1fff -#define TODC_TYPE_DS1553_MONTH 0x1ffe -#define TODC_TYPE_DS1553_DOM 0x1ffd /* Day of Month */ -#define TODC_TYPE_DS1553_DOW 0x1ffc /* Day of Week */ -#define TODC_TYPE_DS1553_HOURS 0x1ffb -#define TODC_TYPE_DS1553_MINUTES 0x1ffa -#define TODC_TYPE_DS1553_SECONDS 0x1ff9 -#define TODC_TYPE_DS1553_CNTL_B 0x1ff9 -#define TODC_TYPE_DS1553_CNTL_A 0x1ff8 /* control_a R/W regs */ -#define TODC_TYPE_DS1553_WATCHDOG 0x1ff7 -#define TODC_TYPE_DS1553_INTERRUPTS 0x1ff6 -#define TODC_TYPE_DS1553_ALARM_DATE 0x1ff5 -#define TODC_TYPE_DS1553_ALARM_HOUR 0x1ff4 -#define TODC_TYPE_DS1553_ALARM_MINUTES 0x1ff3 -#define TODC_TYPE_DS1553_ALARM_SECONDS 0x1ff2 -#define TODC_TYPE_DS1553_CENTURY 0x1ff8 -#define TODC_TYPE_DS1553_FLAGS 0x1ff0 -#define TODC_TYPE_DS1553_NVRAM_ADDR_REG 0 -#define TODC_TYPE_DS1553_NVRAM_DATA_REG 0 - -#define TODC_TYPE_DS1557_NVRAM_SIZE 0x7fff0 -#define TODC_TYPE_DS1557_SW_FLAGS 0 -#define TODC_TYPE_DS1557_YEAR 0x7ffff -#define TODC_TYPE_DS1557_MONTH 0x7fffe -#define TODC_TYPE_DS1557_DOM 0x7fffd /* Day of Month */ -#define TODC_TYPE_DS1557_DOW 0x7fffc /* Day of Week */ -#define TODC_TYPE_DS1557_HOURS 0x7fffb -#define TODC_TYPE_DS1557_MINUTES 0x7fffa -#define TODC_TYPE_DS1557_SECONDS 0x7fff9 -#define TODC_TYPE_DS1557_CNTL_B 0x7fff9 -#define TODC_TYPE_DS1557_CNTL_A 0x7fff8 /* control_a R/W regs */ -#define TODC_TYPE_DS1557_WATCHDOG 0x7fff7 -#define TODC_TYPE_DS1557_INTERRUPTS 0x7fff6 -#define TODC_TYPE_DS1557_ALARM_DATE 0x7fff5 -#define TODC_TYPE_DS1557_ALARM_HOUR 0x7fff4 -#define TODC_TYPE_DS1557_ALARM_MINUTES 0x7fff3 -#define TODC_TYPE_DS1557_ALARM_SECONDS 0x7fff2 -#define TODC_TYPE_DS1557_CENTURY 0x7fff8 -#define TODC_TYPE_DS1557_FLAGS 0x7fff0 -#define TODC_TYPE_DS1557_NVRAM_ADDR_REG 0 -#define TODC_TYPE_DS1557_NVRAM_DATA_REG 0 - -#define TODC_TYPE_DS1643_NVRAM_SIZE 0x1ff8 -#define TODC_TYPE_DS1643_SW_FLAGS 0 -#define TODC_TYPE_DS1643_YEAR 0x1fff -#define TODC_TYPE_DS1643_MONTH 0x1ffe -#define TODC_TYPE_DS1643_DOM 0x1ffd /* Day of Month */ -#define TODC_TYPE_DS1643_DOW 0x1ffc /* Day of Week */ -#define TODC_TYPE_DS1643_HOURS 0x1ffb -#define TODC_TYPE_DS1643_MINUTES 0x1ffa -#define TODC_TYPE_DS1643_SECONDS 0x1ff9 -#define TODC_TYPE_DS1643_CNTL_B 0x1ff9 -#define TODC_TYPE_DS1643_CNTL_A 0x1ff8 /* control_a R/W regs */ -#define TODC_TYPE_DS1643_WATCHDOG 0x1fff -#define TODC_TYPE_DS1643_INTERRUPTS 0x1fff -#define TODC_TYPE_DS1643_ALARM_DATE 0x1fff -#define TODC_TYPE_DS1643_ALARM_HOUR 0x1fff -#define TODC_TYPE_DS1643_ALARM_MINUTES 0x1fff -#define TODC_TYPE_DS1643_ALARM_SECONDS 0x1fff -#define TODC_TYPE_DS1643_CENTURY 0x1ff8 -#define TODC_TYPE_DS1643_FLAGS 0x1fff -#define TODC_TYPE_DS1643_NVRAM_ADDR_REG 0 -#define TODC_TYPE_DS1643_NVRAM_DATA_REG 0 - -#define TODC_TYPE_DS1693_NVRAM_SIZE 0 /* Not handled yet */ -#define TODC_TYPE_DS1693_SW_FLAGS 0 -#define TODC_TYPE_DS1693_YEAR 0x09 -#define TODC_TYPE_DS1693_MONTH 0x08 -#define TODC_TYPE_DS1693_DOM 0x07 /* Day of Month */ -#define TODC_TYPE_DS1693_DOW 0x06 /* Day of Week */ -#define TODC_TYPE_DS1693_HOURS 0x04 -#define TODC_TYPE_DS1693_MINUTES 0x02 -#define TODC_TYPE_DS1693_SECONDS 0x00 -#define TODC_TYPE_DS1693_CNTL_B 0x0b -#define TODC_TYPE_DS1693_CNTL_A 0x0a -#define TODC_TYPE_DS1693_WATCHDOG 0xff -#define TODC_TYPE_DS1693_INTERRUPTS 0xff -#define TODC_TYPE_DS1693_ALARM_DATE 0x49 -#define TODC_TYPE_DS1693_ALARM_HOUR 0x05 -#define TODC_TYPE_DS1693_ALARM_MINUTES 0x03 -#define TODC_TYPE_DS1693_ALARM_SECONDS 0x01 -#define TODC_TYPE_DS1693_CENTURY 0x48 -#define TODC_TYPE_DS1693_FLAGS 0xff -#define TODC_TYPE_DS1693_NVRAM_ADDR_REG 0 -#define TODC_TYPE_DS1693_NVRAM_DATA_REG 0 - -#define TODC_TYPE_DS1743_NVRAM_SIZE 0x1ff8 -#define TODC_TYPE_DS1743_SW_FLAGS 0 -#define TODC_TYPE_DS1743_YEAR 0x1fff -#define TODC_TYPE_DS1743_MONTH 0x1ffe -#define TODC_TYPE_DS1743_DOM 0x1ffd /* Day of Month */ -#define TODC_TYPE_DS1743_DOW 0x1ffc /* Day of Week */ -#define TODC_TYPE_DS1743_HOURS 0x1ffb -#define TODC_TYPE_DS1743_MINUTES 0x1ffa -#define TODC_TYPE_DS1743_SECONDS 0x1ff9 -#define TODC_TYPE_DS1743_CNTL_B 0x1ff9 -#define TODC_TYPE_DS1743_CNTL_A 0x1ff8 /* control_a R/W regs */ -#define TODC_TYPE_DS1743_WATCHDOG 0x1fff -#define TODC_TYPE_DS1743_INTERRUPTS 0x1fff -#define TODC_TYPE_DS1743_ALARM_DATE 0x1fff -#define TODC_TYPE_DS1743_ALARM_HOUR 0x1fff -#define TODC_TYPE_DS1743_ALARM_MINUTES 0x1fff -#define TODC_TYPE_DS1743_ALARM_SECONDS 0x1fff -#define TODC_TYPE_DS1743_CENTURY 0x1ff8 -#define TODC_TYPE_DS1743_FLAGS 0x1fff -#define TODC_TYPE_DS1743_NVRAM_ADDR_REG 0 -#define TODC_TYPE_DS1743_NVRAM_DATA_REG 0 - -#define TODC_TYPE_DS1746_NVRAM_SIZE 0x1fff8 -#define TODC_TYPE_DS1746_SW_FLAGS 0 -#define TODC_TYPE_DS1746_YEAR 0x1ffff -#define TODC_TYPE_DS1746_MONTH 0x1fffe -#define TODC_TYPE_DS1746_DOM 0x1fffd /* Day of Month */ -#define TODC_TYPE_DS1746_DOW 0x1fffc /* Day of Week */ -#define TODC_TYPE_DS1746_HOURS 0x1fffb -#define TODC_TYPE_DS1746_MINUTES 0x1fffa -#define TODC_TYPE_DS1746_SECONDS 0x1fff9 -#define TODC_TYPE_DS1746_CNTL_B 0x1fff9 -#define TODC_TYPE_DS1746_CNTL_A 0x1fff8 /* control_a R/W regs */ -#define TODC_TYPE_DS1746_WATCHDOG 0x00000 -#define TODC_TYPE_DS1746_INTERRUPTS 0x00000 -#define TODC_TYPE_DS1746_ALARM_DATE 0x00000 -#define TODC_TYPE_DS1746_ALARM_HOUR 0x00000 -#define TODC_TYPE_DS1746_ALARM_MINUTES 0x00000 -#define TODC_TYPE_DS1746_ALARM_SECONDS 0x00000 -#define TODC_TYPE_DS1746_CENTURY 0x00000 -#define TODC_TYPE_DS1746_FLAGS 0x00000 -#define TODC_TYPE_DS1746_NVRAM_ADDR_REG 0 -#define TODC_TYPE_DS1746_NVRAM_DATA_REG 0 - -#define TODC_TYPE_DS1747_NVRAM_SIZE 0x7fff8 -#define TODC_TYPE_DS1747_SW_FLAGS 0 -#define TODC_TYPE_DS1747_YEAR 0x7ffff -#define TODC_TYPE_DS1747_MONTH 0x7fffe -#define TODC_TYPE_DS1747_DOM 0x7fffd /* Day of Month */ -#define TODC_TYPE_DS1747_DOW 0x7fffc /* Day of Week */ -#define TODC_TYPE_DS1747_HOURS 0x7fffb -#define TODC_TYPE_DS1747_MINUTES 0x7fffa -#define TODC_TYPE_DS1747_SECONDS 0x7fff9 -#define TODC_TYPE_DS1747_CNTL_B 0x7fff9 -#define TODC_TYPE_DS1747_CNTL_A 0x7fff8 /* control_a R/W regs */ -#define TODC_TYPE_DS1747_WATCHDOG 0x00000 -#define TODC_TYPE_DS1747_INTERRUPTS 0x00000 -#define TODC_TYPE_DS1747_ALARM_DATE 0x00000 -#define TODC_TYPE_DS1747_ALARM_HOUR 0x00000 -#define TODC_TYPE_DS1747_ALARM_MINUTES 0x00000 -#define TODC_TYPE_DS1747_ALARM_SECONDS 0x00000 -#define TODC_TYPE_DS1747_CENTURY 0x00000 -#define TODC_TYPE_DS1747_FLAGS 0x00000 -#define TODC_TYPE_DS1747_NVRAM_ADDR_REG 0 -#define TODC_TYPE_DS1747_NVRAM_DATA_REG 0 - -#define TODC_TYPE_DS17285_NVRAM_SIZE (0x1000-0x80) /* 4Kx8 NVRAM (minus RTC regs) */ -#define TODC_TYPE_DS17285_SW_FLAGS TODC_FLAG_2_LEVEL_NVRAM -#define TODC_TYPE_DS17285_SECONDS (TODC_TYPE_DS17285_NVRAM_SIZE + 0x00) -#define TODC_TYPE_DS17285_ALARM_SECONDS (TODC_TYPE_DS17285_NVRAM_SIZE + 0x01) -#define TODC_TYPE_DS17285_MINUTES (TODC_TYPE_DS17285_NVRAM_SIZE + 0x02) -#define TODC_TYPE_DS17285_ALARM_MINUTES (TODC_TYPE_DS17285_NVRAM_SIZE + 0x03) -#define TODC_TYPE_DS17285_HOURS (TODC_TYPE_DS17285_NVRAM_SIZE + 0x04) -#define TODC_TYPE_DS17285_ALARM_HOUR (TODC_TYPE_DS17285_NVRAM_SIZE + 0x05) -#define TODC_TYPE_DS17285_DOW (TODC_TYPE_DS17285_NVRAM_SIZE + 0x06) -#define TODC_TYPE_DS17285_DOM (TODC_TYPE_DS17285_NVRAM_SIZE + 0x07) -#define TODC_TYPE_DS17285_MONTH (TODC_TYPE_DS17285_NVRAM_SIZE + 0x08) -#define TODC_TYPE_DS17285_YEAR (TODC_TYPE_DS17285_NVRAM_SIZE + 0x09) -#define TODC_TYPE_DS17285_CNTL_A (TODC_TYPE_DS17285_NVRAM_SIZE + 0x0A) -#define TODC_TYPE_DS17285_CNTL_B (TODC_TYPE_DS17285_NVRAM_SIZE + 0x0B) -#define TODC_TYPE_DS17285_CNTL_C (TODC_TYPE_DS17285_NVRAM_SIZE + 0x0C) -#define TODC_TYPE_DS17285_CNTL_D (TODC_TYPE_DS17285_NVRAM_SIZE + 0x0D) -#define TODC_TYPE_DS17285_WATCHDOG 0 -#define TODC_TYPE_DS17285_INTERRUPTS 0 -#define TODC_TYPE_DS17285_ALARM_DATE 0 -#define TODC_TYPE_DS17285_CENTURY 0 -#define TODC_TYPE_DS17285_FLAGS 0 -#define TODC_TYPE_DS17285_NVRAM_ADDR_REG 0x50 -#define TODC_TYPE_DS17285_NVRAM_DATA_REG 0x53 - -#define TODC_TYPE_MC146818_NVRAM_SIZE 0 /* XXXX */ -#define TODC_TYPE_MC146818_SW_FLAGS 0 -#define TODC_TYPE_MC146818_YEAR 0x09 -#define TODC_TYPE_MC146818_MONTH 0x08 -#define TODC_TYPE_MC146818_DOM 0x07 /* Day of Month */ -#define TODC_TYPE_MC146818_DOW 0x06 /* Day of Week */ -#define TODC_TYPE_MC146818_HOURS 0x04 -#define TODC_TYPE_MC146818_MINUTES 0x02 -#define TODC_TYPE_MC146818_SECONDS 0x00 -#define TODC_TYPE_MC146818_CNTL_B 0x0a -#define TODC_TYPE_MC146818_CNTL_A 0x0b /* control_a R/W regs */ -#define TODC_TYPE_MC146818_WATCHDOG 0 -#define TODC_TYPE_MC146818_INTERRUPTS 0x0c -#define TODC_TYPE_MC146818_ALARM_DATE 0xff -#define TODC_TYPE_MC146818_ALARM_HOUR 0x05 -#define TODC_TYPE_MC146818_ALARM_MINUTES 0x03 -#define TODC_TYPE_MC146818_ALARM_SECONDS 0x01 -#define TODC_TYPE_MC146818_CENTURY 0xff -#define TODC_TYPE_MC146818_FLAGS 0xff -#define TODC_TYPE_MC146818_NVRAM_ADDR_REG 0 -#define TODC_TYPE_MC146818_NVRAM_DATA_REG 0 - -#define TODC_TYPE_PC97307_NVRAM_SIZE 0 /* No NVRAM? */ -#define TODC_TYPE_PC97307_SW_FLAGS 0 -#define TODC_TYPE_PC97307_YEAR 0x09 -#define TODC_TYPE_PC97307_MONTH 0x08 -#define TODC_TYPE_PC97307_DOM 0x07 /* Day of Month */ -#define TODC_TYPE_PC97307_DOW 0x06 /* Day of Week */ -#define TODC_TYPE_PC97307_HOURS 0x04 -#define TODC_TYPE_PC97307_MINUTES 0x02 -#define TODC_TYPE_PC97307_SECONDS 0x00 -#define TODC_TYPE_PC97307_CNTL_B 0x0a -#define TODC_TYPE_PC97307_CNTL_A 0x0b /* control_a R/W regs */ -#define TODC_TYPE_PC97307_WATCHDOG 0x0c -#define TODC_TYPE_PC97307_INTERRUPTS 0x0d -#define TODC_TYPE_PC97307_ALARM_DATE 0xff -#define TODC_TYPE_PC97307_ALARM_HOUR 0x05 -#define TODC_TYPE_PC97307_ALARM_MINUTES 0x03 -#define TODC_TYPE_PC97307_ALARM_SECONDS 0x01 -#define TODC_TYPE_PC97307_CENTURY 0xff -#define TODC_TYPE_PC97307_FLAGS 0xff -#define TODC_TYPE_PC97307_NVRAM_ADDR_REG 0 -#define TODC_TYPE_PC97307_NVRAM_DATA_REG 0 - -/* - * Define macros to allocate and init the todc_info_t table that will - * be used by the todc_time.c routines. - */ -#define TODC_ALLOC() \ - static todc_info_t todc_info_alloc; \ - todc_info_t *todc_info = &todc_info_alloc; - -#define TODC_INIT(clock_type, as0, as1, data, bits) { \ - todc_info->rtc_type = clock_type; \ - \ - todc_info->nvram_as0 = (unsigned int)(as0); \ - todc_info->nvram_as1 = (unsigned int)(as1); \ - todc_info->nvram_data = (unsigned int)(data); \ - \ - todc_info->as0_bits = (bits); \ - \ - todc_info->nvram_size = clock_type ##_NVRAM_SIZE; \ - todc_info->sw_flags = clock_type ##_SW_FLAGS; \ - \ - todc_info->year = clock_type ##_YEAR; \ - todc_info->month = clock_type ##_MONTH; \ - todc_info->day_of_month = clock_type ##_DOM; \ - todc_info->day_of_week = clock_type ##_DOW; \ - todc_info->hours = clock_type ##_HOURS; \ - todc_info->minutes = clock_type ##_MINUTES; \ - todc_info->seconds = clock_type ##_SECONDS; \ - todc_info->control_b = clock_type ##_CNTL_B; \ - todc_info->control_a = clock_type ##_CNTL_A; \ - todc_info->watchdog = clock_type ##_WATCHDOG; \ - todc_info->interrupts = clock_type ##_INTERRUPTS; \ - todc_info->alarm_date = clock_type ##_ALARM_DATE; \ - todc_info->alarm_hour = clock_type ##_ALARM_HOUR; \ - todc_info->alarm_minutes = clock_type ##_ALARM_MINUTES; \ - todc_info->alarm_seconds = clock_type ##_ALARM_SECONDS; \ - todc_info->century = clock_type ##_CENTURY; \ - todc_info->flags = clock_type ##_FLAGS; \ - \ - todc_info->nvram_addr_reg = clock_type ##_NVRAM_ADDR_REG; \ - todc_info->nvram_data_reg = clock_type ##_NVRAM_DATA_REG; \ -} - -extern todc_info_t *todc_info; - -unsigned char todc_direct_read_val(int addr); -void todc_direct_write_val(int addr, unsigned char val); -unsigned char todc_m48txx_read_val(int addr); -void todc_m48txx_write_val(int addr, unsigned char val); -unsigned char todc_mc146818_read_val(int addr); -void todc_mc146818_write_val(int addr, unsigned char val); - -long todc_time_init(void); -void todc_get_rtc_time(struct rtc_time *); -int todc_set_rtc_time(struct rtc_time *); -void todc_calibrate_decr(void); - -#endif /* __PPC_KERNEL_TODC_H */ -- cgit v1.2.3-70-g09d2 From 035223fb28791f0eb0d5719727355d3f6817d228 Mon Sep 17 00:00:00 2001 From: Geoff Levand Date: Thu, 5 Oct 2006 11:35:10 -0700 Subject: [POWERPC] Make pSeries_lpar_hpte_insert static Change the powerpc hpte_insert routines now called through ppc_md to static scope. Signed-off-by: Geoff Levand Signed-off-by: Paul Mackerras --- arch/powerpc/mm/hash_native_64.c | 2 +- arch/powerpc/platforms/pseries/lpar.c | 4 ++-- include/asm-powerpc/mmu.h | 15 --------------- 3 files changed, 3 insertions(+), 18 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/mm/hash_native_64.c b/arch/powerpc/mm/hash_native_64.c index c90f124f3c7..6f1016acdbf 100644 --- a/arch/powerpc/mm/hash_native_64.c +++ b/arch/powerpc/mm/hash_native_64.c @@ -123,7 +123,7 @@ static inline void native_unlock_hpte(hpte_t *hptep) clear_bit(HPTE_LOCK_BIT, word); } -long native_hpte_insert(unsigned long hpte_group, unsigned long va, +static long native_hpte_insert(unsigned long hpte_group, unsigned long va, unsigned long pa, unsigned long rflags, unsigned long vflags, int psize) { diff --git a/arch/powerpc/platforms/pseries/lpar.c b/arch/powerpc/platforms/pseries/lpar.c index 1820a0b0a8c..721436db3ef 100644 --- a/arch/powerpc/platforms/pseries/lpar.c +++ b/arch/powerpc/platforms/pseries/lpar.c @@ -282,7 +282,7 @@ void vpa_init(int cpu) } } -long pSeries_lpar_hpte_insert(unsigned long hpte_group, +static long pSeries_lpar_hpte_insert(unsigned long hpte_group, unsigned long va, unsigned long pa, unsigned long rflags, unsigned long vflags, int psize) @@ -506,7 +506,7 @@ static void pSeries_lpar_hpte_invalidate(unsigned long slot, unsigned long va, * Take a spinlock around flushes to avoid bouncing the hypervisor tlbie * lock. */ -void pSeries_lpar_flush_hash_range(unsigned long number, int local) +static void pSeries_lpar_flush_hash_range(unsigned long number, int local) { int i; unsigned long flags = 0; diff --git a/include/asm-powerpc/mmu.h b/include/asm-powerpc/mmu.h index c3fc7a28e3c..41c8c9c5a25 100644 --- a/include/asm-powerpc/mmu.h +++ b/include/asm-powerpc/mmu.h @@ -248,21 +248,6 @@ extern void hpte_init_native(void); extern void hpte_init_lpar(void); extern void hpte_init_iSeries(void); -extern long pSeries_lpar_hpte_insert(unsigned long hpte_group, - unsigned long va, unsigned long prpn, - unsigned long rflags, - unsigned long vflags, int psize); - -extern long native_hpte_insert(unsigned long hpte_group, - unsigned long va, unsigned long prpn, - unsigned long rflags, - unsigned long vflags, int psize); - -extern long iSeries_hpte_insert(unsigned long hpte_group, - unsigned long va, unsigned long prpn, - unsigned long rflags, - unsigned long vflags, int psize); - extern void stabs_alloc(void); extern void slb_initialize(void); extern void slb_flush_and_rebolt(void); -- cgit v1.2.3-70-g09d2 From b0a779debd56514b2b5de7617a1643e5dac2d4dd Mon Sep 17 00:00:00 2001 From: Paul Mackerras Date: Wed, 18 Oct 2006 10:11:22 +1000 Subject: [POWERPC] Make sure interrupt enable gets restored properly The lazy IRQ disable patch missed a couple of places where the interrupt enable flags need to be restored correctly. First, we weren't restoring the paca->hard_enabled flag on interrupt exit. Instead of saving it on entry, we compute it from the MSR_EE bit in the MSR we are restoring at exit. Secondly, the MMU hash miss code was clearing both paca->soft_enabled and paca->hard_enabled but not restoring them in the case where hash_page was able to resolve the miss from the Linux page tables. Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/entry_64.S | 4 ++++ arch/powerpc/kernel/head_64.S | 28 +++++++++++++++++++--------- 2 files changed, 23 insertions(+), 9 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/kernel/entry_64.S b/arch/powerpc/kernel/entry_64.S index efda48741b2..86e2bdd5afd 100644 --- a/arch/powerpc/kernel/entry_64.S +++ b/arch/powerpc/kernel/entry_64.S @@ -489,6 +489,10 @@ END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES) andi. r0,r3,MSR_RI beq- unrecov_restore + /* extract EE bit and use it to restore paca->hard_enabled */ + rldicl r4,r3,49,63 /* r0 = (r3 >> 15) & 1 */ + stb r4,PACAHARDIRQEN(r13) + andi. r0,r3,MSR_PR /* diff --git a/arch/powerpc/kernel/head_64.S b/arch/powerpc/kernel/head_64.S index c93d9f35a12..d2890050b7e 100644 --- a/arch/powerpc/kernel/head_64.S +++ b/arch/powerpc/kernel/head_64.S @@ -961,10 +961,18 @@ bad_stack: * any task or sent any task a signal, you should use * ret_from_except or ret_from_except_lite instead of this. */ +fast_exc_return_irq: /* restores irq state too */ + ld r3,SOFTE(r1) + ld r12,_MSR(r1) + stb r3,PACASOFTIRQEN(r13) /* restore paca->soft_enabled */ + rldicl r4,r12,49,63 /* get MSR_EE to LSB */ + stb r4,PACAHARDIRQEN(r13) /* restore paca->hard_enabled */ + b 1f + .globl fast_exception_return fast_exception_return: ld r12,_MSR(r1) - ld r11,_NIP(r1) +1: ld r11,_NIP(r1) andi. r3,r12,MSR_RI /* check if RI is set */ beq- unrecov_fer @@ -1361,6 +1369,16 @@ BEGIN_FW_FTR_SECTION * interrupts if necessary. */ beq .ret_from_except_lite +END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES) +#endif +BEGIN_FW_FTR_SECTION + /* + * Here we have interrupts hard-disabled, so it is sufficient + * to restore paca->{soft,hard}_enable and get out. + */ + beq fast_exc_return_irq /* Return from exception on success */ +END_FW_FTR_SECTION_IFCLR(FW_FEATURE_ISERIES) + /* For a hash failure, we don't bother re-enabling interrupts */ ble- 12f @@ -1372,14 +1390,6 @@ BEGIN_FW_FTR_SECTION ld r3,SOFTE(r1) bl .local_irq_restore b 11f -END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES) -#endif -BEGIN_FW_FTR_SECTION - beq fast_exception_return /* Return from exception on success */ - ble- 12f /* Failure return from hash_page */ - - /* fall through */ -END_FW_FTR_SECTION_IFCLR(FW_FEATURE_ISERIES) /* Here we have a page fault that hash_page can't handle. */ _GLOBAL(handle_page_fault) -- cgit v1.2.3-70-g09d2 From c888554bf95a5a0a6ac3e2389c6bf1e03e9480ba Mon Sep 17 00:00:00 2001 From: "Mark A. Greer" Date: Mon, 16 Oct 2006 13:49:27 -0700 Subject: [POWERPC] More bootwrapper reorganization More reorganization of the bootwrapper: - Add dtb section to zImage - ft_init now called by platform_init - Pack a flat dt before calling kernel - Remove size parameter from free - printf only calls console_ops.write it its not NULL - Some cleanup Signed-off-by: Mark A. Greer Signed-off-by: Paul Mackerras --- arch/powerpc/boot/main.c | 27 ++++++--------------------- arch/powerpc/boot/of.c | 8 +------- arch/powerpc/boot/ops.h | 25 ++++++++++++++----------- arch/powerpc/boot/stdio.c | 3 ++- arch/powerpc/boot/wrapper | 4 ++-- arch/powerpc/boot/zImage.coff.lds.S | 4 ++++ arch/powerpc/boot/zImage.lds.S | 5 +++++ 7 files changed, 34 insertions(+), 42 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/boot/main.c b/arch/powerpc/boot/main.c index d719bb9333d..418497482b6 100644 --- a/arch/powerpc/boot/main.c +++ b/arch/powerpc/boot/main.c @@ -27,6 +27,8 @@ extern char _vmlinux_start[]; extern char _vmlinux_end[]; extern char _initrd_start[]; extern char _initrd_end[]; +extern char _dtb_start[]; +extern char _dtb_end[]; struct addr_range { unsigned long addr; @@ -250,10 +252,6 @@ static void prep_kernel(unsigned long *a1, unsigned long *a2) flush_cache((void *)vmlinux.addr, vmlinux.size); } -void __attribute__ ((weak)) ft_init(void *dt_blob) -{ -} - /* A buffer that may be edited by tools operating on a zImage binary so as to * edit the command line passed to vmlinux (by setting /chosen/bootargs). * The buffer is put in it's own section so that tools may locate it easier. @@ -285,19 +283,12 @@ static void set_cmdline(char *buf) setprop(devp, "bootargs", buf, strlen(buf) + 1); } -/* Section where ft can be tacked on after zImage is built */ -union blobspace { - struct boot_param_header hdr; - char space[8*1024]; -} dt_blob __attribute__((__section__("__builtin_ft"))); - struct platform_ops platform_ops; struct dt_ops dt_ops; struct console_ops console_ops; void start(unsigned long a1, unsigned long a2, void *promptr, void *sp) { - int have_dt = 0; kernel_entry_t kentry; char cmdline[COMMAND_LINE_SIZE]; @@ -306,15 +297,7 @@ void start(unsigned long a1, unsigned long a2, void *promptr, void *sp) memset(&dt_ops, 0, sizeof(dt_ops)); memset(&console_ops, 0, sizeof(console_ops)); - /* Override the dt_ops and device tree if there was an flat dev - * tree attached to the zImage. - */ - if (dt_blob.hdr.magic == OF_DT_HEADER) { - have_dt = 1; - ft_init(&dt_blob); - } - - if (platform_init(promptr)) + if (platform_init(promptr, _dtb_start, _dtb_end)) exit(); if (console_ops.open && (console_ops.open() < 0)) exit(); @@ -342,8 +325,10 @@ void start(unsigned long a1, unsigned long a2, void *promptr, void *sp) console_ops.close(); kentry = (kernel_entry_t) vmlinux.addr; - if (have_dt) + if (_dtb_end > _dtb_start) { + dt_ops.ft_pack(); kentry(dt_ops.ft_addr(), 0, NULL); + } else /* XXX initrd addr/size should be passed in properties */ kentry(a1, a2, promptr); diff --git a/arch/powerpc/boot/of.c b/arch/powerpc/boot/of.c index 3a71845afc6..0182f384f3e 100644 --- a/arch/powerpc/boot/of.c +++ b/arch/powerpc/boot/of.c @@ -256,24 +256,18 @@ static void of_console_write(char *buf, int len) call_prom("write", 3, 1, of_stdout_handle, buf, len); } -int platform_init(void *promptr) +int platform_init(void *promptr, char *dt_blob_start, char *dt_blob_end) { - platform_ops.fixups = NULL; platform_ops.image_hdr = of_image_hdr; platform_ops.malloc = of_try_claim; - platform_ops.free = NULL; platform_ops.exit = of_exit; dt_ops.finddevice = of_finddevice; dt_ops.getprop = of_getprop; dt_ops.setprop = of_setprop; - dt_ops.translate_addr = NULL; console_ops.open = of_console_open; console_ops.write = of_console_write; - console_ops.edit_cmdline = NULL; - console_ops.close = NULL; - console_ops.data = NULL; prom = (int (*)(void *))promptr; return 0; diff --git a/arch/powerpc/boot/ops.h b/arch/powerpc/boot/ops.h index 135eb4bb03b..59832fb0f27 100644 --- a/arch/powerpc/boot/ops.h +++ b/arch/powerpc/boot/ops.h @@ -22,7 +22,8 @@ struct platform_ops { void (*fixups)(void); void (*image_hdr)(const void *); void * (*malloc)(u32 size); - void (*free)(void *ptr, u32 size); + void (*free)(void *ptr); + void * (*realloc)(void *ptr, unsigned long size); void (*exit)(void); }; extern struct platform_ops platform_ops; @@ -30,12 +31,11 @@ extern struct platform_ops platform_ops; /* Device Tree operations */ struct dt_ops { void * (*finddevice)(const char *name); - int (*getprop)(const void *node, const char *name, void *buf, + int (*getprop)(const void *phandle, const char *name, void *buf, const int buflen); - int (*setprop)(const void *node, const char *name, + int (*setprop)(const void *phandle, const char *name, const void *buf, const int buflen); - u64 (*translate_addr)(const char *path, const u32 *in_addr, - const u32 addr_len); + void (*ft_pack)(void); unsigned long (*ft_addr)(void); }; extern struct dt_ops dt_ops; @@ -59,10 +59,13 @@ struct serial_console_data { void (*close)(void); }; -extern int platform_init(void *promptr); -extern void simple_alloc_init(void); -extern void ft_init(void *dt_blob); -extern int serial_console_init(void); +int platform_init(void *promptr, char *dt_blob_start, char *dt_blob_end); +int ft_init(void *dt_blob, unsigned int max_size, unsigned int max_find_device); +int serial_console_init(void); +int ns16550_console_init(void *devp, struct serial_console_data *scdp); +void *simple_alloc_init(char *base, u32 heap_size, u32 granularity, + u32 max_allocs); + static inline void *finddevice(const char *name) { @@ -84,10 +87,10 @@ static inline void *malloc(u32 size) return (platform_ops.malloc) ? platform_ops.malloc(size) : NULL; } -static inline void free(void *ptr, u32 size) +static inline void free(void *ptr) { if (platform_ops.free) - platform_ops.free(ptr, size); + platform_ops.free(ptr); } static inline void exit(void) diff --git a/arch/powerpc/boot/stdio.c b/arch/powerpc/boot/stdio.c index 6d5f6382e1c..0a9feeb9834 100644 --- a/arch/powerpc/boot/stdio.c +++ b/arch/powerpc/boot/stdio.c @@ -320,6 +320,7 @@ printf(const char *fmt, ...) va_start(args, fmt); n = vsprintf(sprint_buf, fmt, args); va_end(args); - console_ops.write(sprint_buf, n); + if (console_ops.write) + console_ops.write(sprint_buf, n); return n; } diff --git a/arch/powerpc/boot/wrapper b/arch/powerpc/boot/wrapper index eab7318729e..b5fb1fee76f 100755 --- a/arch/powerpc/boot/wrapper +++ b/arch/powerpc/boot/wrapper @@ -179,11 +179,11 @@ if [ -z "$cacheit" ]; then fi if [ -n "$initrd" ]; then - addsec $tmp "$initrd" initrd + addsec $tmp "$initrd" $isection fi if [ -n "$dtb" ]; then - addsec $tmp "$dtb" dtb + addsec $tmp "$dtb" .kernel:dtb fi if [ "$platform" != "miboot" ]; then diff --git a/arch/powerpc/boot/zImage.coff.lds.S b/arch/powerpc/boot/zImage.coff.lds.S index 05f32388b95..a360905e542 100644 --- a/arch/powerpc/boot/zImage.coff.lds.S +++ b/arch/powerpc/boot/zImage.coff.lds.S @@ -21,6 +21,10 @@ SECTIONS *(.got2) __got2_end = .; + _dtb_start = .; + *(.kernel:dtb) + _dtb_end = .; + _vmlinux_start = .; *(.kernel:vmlinux.strip) _vmlinux_end = .; diff --git a/arch/powerpc/boot/zImage.lds.S b/arch/powerpc/boot/zImage.lds.S index 4b6bb3ffe3d..4be3c6414b0 100644 --- a/arch/powerpc/boot/zImage.lds.S +++ b/arch/powerpc/boot/zImage.lds.S @@ -21,6 +21,11 @@ SECTIONS __got2_end = .; } + . = ALIGN(8); + _dtb_start = .; + .kernel:dtb : { *(.kernel:dtb) } + _dtb_end = .; + . = ALIGN(4096); _vmlinux_start = .; .kernel:vmlinux.strip : { *(.kernel:vmlinux.strip) } -- cgit v1.2.3-70-g09d2 From 6fb4efc68f5c0e095153510dcfa8b54a42e914ba Mon Sep 17 00:00:00 2001 From: "Mark A. Greer" Date: Mon, 16 Oct 2006 13:50:05 -0700 Subject: [POWERPC] Add flatdevtree source Add the latest version of the flatdevtree code and corresponding glue. A phandle table now tracks values returned by ft_find_device(). The value returned by ft_find_device() is a phandle which is really an index into the phandle table. The phandle table contains the address of the corresponding node. When the flat dt is edited/moved, the node pointers in the phandle table are updated accordingly so no phandles kept by the caller become stale. Signed-off-by: Mark A. Greer Signed-off-by: Paul Mackerras --- arch/powerpc/boot/Makefile | 3 +- arch/powerpc/boot/flatdevtree.c | 880 +++++++++++++++++++++++++++++++++++ arch/powerpc/boot/flatdevtree.h | 62 ++- arch/powerpc/boot/flatdevtree_env.h | 47 ++ arch/powerpc/boot/flatdevtree_misc.c | 56 +++ 5 files changed, 1046 insertions(+), 2 deletions(-) create mode 100644 arch/powerpc/boot/flatdevtree.c create mode 100644 arch/powerpc/boot/flatdevtree_env.h create mode 100644 arch/powerpc/boot/flatdevtree_misc.c (limited to 'arch/powerpc') diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile index 37ddfcab000..8660cc50cb1 100644 --- a/arch/powerpc/boot/Makefile +++ b/arch/powerpc/boot/Makefile @@ -40,7 +40,8 @@ zliblinuxheader := zlib.h zconf.h zutil.h $(addprefix $(obj)/,$(zlib) main.o): $(addprefix $(obj)/,$(zliblinuxheader)) \ $(addprefix $(obj)/,$(zlibheader)) -src-wlib := string.S stdio.c main.c div64.S $(zlib) +src-wlib := string.S stdio.c main.c flatdevtree.c flatdevtree_misc.c div64.S \ + $(zlib) src-plat := of.c src-boot := crt0.S $(src-wlib) $(src-plat) empty.c diff --git a/arch/powerpc/boot/flatdevtree.c b/arch/powerpc/boot/flatdevtree.c new file mode 100644 index 00000000000..c76c194715b --- /dev/null +++ b/arch/powerpc/boot/flatdevtree.c @@ -0,0 +1,880 @@ +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. + * + * Copyright Pantelis Antoniou 2006 + * Copyright (C) IBM Corporation 2006 + * + * Authors: Pantelis Antoniou + * Hollis Blanchard + * Mark A. Greer + * Paul Mackerras + */ + +#include +#include +#include "flatdevtree.h" +#include "flatdevtree_env.h" + +#define _ALIGN(x, al) (((x) + (al) - 1) & ~((al) - 1)) + +/* Routines for keeping node ptrs returned by ft_find_device current */ +/* First entry not used b/c it would return 0 and be taken as NULL/error */ +static void *ft_node_add(struct ft_cxt *cxt, char *node) +{ + unsigned int i; + + for (i = 1; i < cxt->nodes_used; i++) /* already there? */ + if (cxt->node_tbl[i] == node) + return (void *)i; + + if (cxt->nodes_used < cxt->node_max) { + cxt->node_tbl[cxt->nodes_used] = node; + return (void *)cxt->nodes_used++; + } + + return NULL; +} + +static char *ft_node_ph2node(struct ft_cxt *cxt, const void *phandle) +{ + unsigned int i = (unsigned int)phandle; + + if (i < cxt->nodes_used) + return cxt->node_tbl[i]; + return NULL; +} + +static void ft_node_update_before(struct ft_cxt *cxt, char *addr, int shift) +{ + unsigned int i; + + if (shift == 0) + return; + + for (i = 1; i < cxt->nodes_used; i++) + if (cxt->node_tbl[i] < addr) + cxt->node_tbl[i] += shift; +} + +static void ft_node_update_after(struct ft_cxt *cxt, char *addr, int shift) +{ + unsigned int i; + + if (shift == 0) + return; + + for (i = 1; i < cxt->nodes_used; i++) + if (cxt->node_tbl[i] >= addr) + cxt->node_tbl[i] += shift; +} + +/* Struct used to return info from ft_next() */ +struct ft_atom { + u32 tag; + const char *name; + void *data; + u32 size; +}; + +/* Set ptrs to current one's info; return addr of next one */ +static char *ft_next(struct ft_cxt *cxt, char *p, struct ft_atom *ret) +{ + u32 sz; + + if (p >= cxt->rgn[FT_STRUCT].start + cxt->rgn[FT_STRUCT].size) + return NULL; + + ret->tag = be32_to_cpu(*(u32 *) p); + p += 4; + + switch (ret->tag) { /* Tag */ + case OF_DT_BEGIN_NODE: + ret->name = p; + ret->data = (void *)(p - 4); /* start of node */ + p += _ALIGN(strlen(p) + 1, 4); + break; + case OF_DT_PROP: + ret->size = sz = be32_to_cpu(*(u32 *) p); + ret->name = cxt->str_anchor + be32_to_cpu(*(u32 *) (p + 4)); + ret->data = (void *)(p + 8); + p += 8 + _ALIGN(sz, 4); + break; + case OF_DT_END_NODE: + case OF_DT_NOP: + break; + case OF_DT_END: + default: + p = NULL; + break; + } + + return p; +} + +#define HDR_SIZE _ALIGN(sizeof(struct boot_param_header), 8) +#define EXPAND_INCR 1024 /* alloc this much extra when expanding */ + +/* See if the regions are in the standard order and non-overlapping */ +static int ft_ordered(struct ft_cxt *cxt) +{ + char *p = (char *)cxt->bph + HDR_SIZE; + enum ft_rgn_id r; + + for (r = FT_RSVMAP; r <= FT_STRINGS; ++r) { + if (p > cxt->rgn[r].start) + return 0; + p = cxt->rgn[r].start + cxt->rgn[r].size; + } + return p <= (char *)cxt->bph + cxt->max_size; +} + +/* Copy the tree to a newly-allocated region and put things in order */ +static int ft_reorder(struct ft_cxt *cxt, int nextra) +{ + unsigned long tot; + enum ft_rgn_id r; + char *p, *pend; + int stroff; + + tot = HDR_SIZE + EXPAND_INCR; + for (r = FT_RSVMAP; r <= FT_STRINGS; ++r) + tot += cxt->rgn[r].size; + if (nextra > 0) + tot += nextra; + tot = _ALIGN(tot, 8); + + if (!cxt->realloc) + return 0; + p = cxt->realloc(NULL, tot); + if (!p) + return 0; + + memcpy(p, cxt->bph, sizeof(struct boot_param_header)); + /* offsets get fixed up later */ + + cxt->bph = (struct boot_param_header *)p; + cxt->max_size = tot; + pend = p + tot; + p += HDR_SIZE; + + memcpy(p, cxt->rgn[FT_RSVMAP].start, cxt->rgn[FT_RSVMAP].size); + cxt->rgn[FT_RSVMAP].start = p; + p += cxt->rgn[FT_RSVMAP].size; + + memcpy(p, cxt->rgn[FT_STRUCT].start, cxt->rgn[FT_STRUCT].size); + ft_node_update_after(cxt, cxt->rgn[FT_STRUCT].start, + p - cxt->rgn[FT_STRUCT].start); + cxt->p += p - cxt->rgn[FT_STRUCT].start; + cxt->rgn[FT_STRUCT].start = p; + + p = pend - cxt->rgn[FT_STRINGS].size; + memcpy(p, cxt->rgn[FT_STRINGS].start, cxt->rgn[FT_STRINGS].size); + stroff = cxt->str_anchor - cxt->rgn[FT_STRINGS].start; + cxt->rgn[FT_STRINGS].start = p; + cxt->str_anchor = p + stroff; + + cxt->isordered = 1; + return 1; +} + +static inline char *prev_end(struct ft_cxt *cxt, enum ft_rgn_id r) +{ + if (r > FT_RSVMAP) + return cxt->rgn[r - 1].start + cxt->rgn[r - 1].size; + return (char *)cxt->bph + HDR_SIZE; +} + +static inline char *next_start(struct ft_cxt *cxt, enum ft_rgn_id r) +{ + if (r < FT_STRINGS) + return cxt->rgn[r + 1].start; + return (char *)cxt->bph + cxt->max_size; +} + +/* + * See if we can expand region rgn by nextra bytes by using up + * free space after or before the region. + */ +static int ft_shuffle(struct ft_cxt *cxt, char **pp, enum ft_rgn_id rgn, + int nextra) +{ + char *p = *pp; + char *rgn_start, *rgn_end; + + rgn_start = cxt->rgn[rgn].start; + rgn_end = rgn_start + cxt->rgn[rgn].size; + if (nextra <= 0 || rgn_end + nextra <= next_start(cxt, rgn)) { + /* move following stuff */ + if (p < rgn_end) { + if (nextra < 0) + memmove(p, p - nextra, rgn_end - p + nextra); + else + memmove(p + nextra, p, rgn_end - p); + if (rgn == FT_STRUCT) + ft_node_update_after(cxt, p, nextra); + } + cxt->rgn[rgn].size += nextra; + if (rgn == FT_STRINGS) + /* assumes strings only added at beginning */ + cxt->str_anchor += nextra; + return 1; + } + if (prev_end(cxt, rgn) <= rgn_start - nextra) { + /* move preceding stuff */ + if (p > rgn_start) { + memmove(rgn_start - nextra, rgn_start, p - rgn_start); + if (rgn == FT_STRUCT) + ft_node_update_before(cxt, p, -nextra); + } + *p -= nextra; + cxt->rgn[rgn].start -= nextra; + cxt->rgn[rgn].size += nextra; + return 1; + } + return 0; +} + +static int ft_make_space(struct ft_cxt *cxt, char **pp, enum ft_rgn_id rgn, + int nextra) +{ + unsigned long size, ssize, tot; + char *str, *next; + enum ft_rgn_id r; + + if (!cxt->isordered && !ft_reorder(cxt, nextra)) + return 0; + if (ft_shuffle(cxt, pp, rgn, nextra)) + return 1; + + /* See if there is space after the strings section */ + ssize = cxt->rgn[FT_STRINGS].size; + if (cxt->rgn[FT_STRINGS].start + ssize + < (char *)cxt->bph + cxt->max_size) { + /* move strings up as far as possible */ + str = (char *)cxt->bph + cxt->max_size - ssize; + cxt->str_anchor += str - cxt->rgn[FT_STRINGS].start; + memmove(str, cxt->rgn[FT_STRINGS].start, ssize); + cxt->rgn[FT_STRINGS].start = str; + /* enough space now? */ + if (rgn >= FT_STRUCT && ft_shuffle(cxt, pp, rgn, nextra)) + return 1; + } + + /* how much total free space is there following this region? */ + tot = 0; + for (r = rgn; r < FT_STRINGS; ++r) { + char *r_end = cxt->rgn[r].start + cxt->rgn[r].size; + tot += next_start(cxt, rgn) - r_end; + } + + /* cast is to shut gcc up; we know nextra >= 0 */ + if (tot < (unsigned int)nextra) { + /* have to reallocate */ + char *newp, *new_start; + int shift; + + if (!cxt->realloc) + return 0; + size = _ALIGN(cxt->max_size + (nextra - tot) + EXPAND_INCR, 8); + newp = cxt->realloc(cxt->bph, size); + if (!newp) + return 0; + cxt->max_size = size; + shift = newp - (char *)cxt->bph; + + if (shift) { /* realloc can return same addr */ + cxt->bph = (struct boot_param_header *)newp; + ft_node_update_after(cxt, cxt->rgn[FT_STRUCT].start, + shift); + for (r = FT_RSVMAP; r <= FT_STRINGS; ++r) { + new_start = cxt->rgn[r].start + shift; + cxt->rgn[r].start = new_start; + } + *pp += shift; + cxt->str_anchor += shift; + } + + /* move strings up to the end */ + str = newp + size - ssize; + cxt->str_anchor += str - cxt->rgn[FT_STRINGS].start; + memmove(str, cxt->rgn[FT_STRINGS].start, ssize); + cxt->rgn[FT_STRINGS].start = str; + + if (ft_shuffle(cxt, pp, rgn, nextra)) + return 1; + } + + /* must be FT_RSVMAP and we need to move FT_STRUCT up */ + if (rgn == FT_RSVMAP) { + next = cxt->rgn[FT_RSVMAP].start + cxt->rgn[FT_RSVMAP].size + + nextra; + ssize = cxt->rgn[FT_STRUCT].size; + if (next + ssize >= cxt->rgn[FT_STRINGS].start) + return 0; /* "can't happen" */ + memmove(next, cxt->rgn[FT_STRUCT].start, ssize); + ft_node_update_after(cxt, cxt->rgn[FT_STRUCT].start, nextra); + cxt->rgn[FT_STRUCT].start = next; + + if (ft_shuffle(cxt, pp, rgn, nextra)) + return 1; + } + + return 0; /* "can't happen" */ +} + +static void ft_put_word(struct ft_cxt *cxt, u32 v) +{ + *(u32 *) cxt->p = cpu_to_be32(v); + cxt->p += 4; +} + +static void ft_put_bin(struct ft_cxt *cxt, const void *data, unsigned int sz) +{ + unsigned long sza = _ALIGN(sz, 4); + + /* zero out the alignment gap if necessary */ + if (sz < sza) + *(u32 *) (cxt->p + sza - 4) = 0; + + /* copy in the data */ + memcpy(cxt->p, data, sz); + + cxt->p += sza; +} + +int ft_begin_node(struct ft_cxt *cxt, const char *name) +{ + unsigned long nlen = strlen(name) + 1; + unsigned long len = 8 + _ALIGN(nlen, 4); + + if (!ft_make_space(cxt, &cxt->p, FT_STRUCT, len)) + return -1; + ft_put_word(cxt, OF_DT_BEGIN_NODE); + ft_put_bin(cxt, name, strlen(name) + 1); + return 0; +} + +void ft_end_node(struct ft_cxt *cxt) +{ + ft_put_word(cxt, OF_DT_END_NODE); +} + +void ft_nop(struct ft_cxt *cxt) +{ + if (ft_make_space(cxt, &cxt->p, FT_STRUCT, 4)) + ft_put_word(cxt, OF_DT_NOP); +} + +#define NO_STRING 0x7fffffff + +static int lookup_string(struct ft_cxt *cxt, const char *name) +{ + char *p, *end; + + p = cxt->rgn[FT_STRINGS].start; + end = p + cxt->rgn[FT_STRINGS].size; + while (p < end) { + if (strcmp(p, (char *)name) == 0) + return p - cxt->str_anchor; + p += strlen(p) + 1; + } + + return NO_STRING; +} + +/* lookup string and insert if not found */ +static int map_string(struct ft_cxt *cxt, const char *name) +{ + int off; + char *p; + + off = lookup_string(cxt, name); + if (off != NO_STRING) + return off; + p = cxt->rgn[FT_STRINGS].start; + if (!ft_make_space(cxt, &p, FT_STRINGS, strlen(name) + 1)) + return NO_STRING; + strcpy(p, name); + return p - cxt->str_anchor; +} + +int ft_prop(struct ft_cxt *cxt, const char *name, const void *data, + unsigned int sz) +{ + int off, len; + + off = lookup_string(cxt, name); + if (off == NO_STRING) + return -1; + + len = 12 + _ALIGN(sz, 4); + if (!ft_make_space(cxt, &cxt->p, FT_STRUCT, len)) + return -1; + + ft_put_word(cxt, OF_DT_PROP); + ft_put_word(cxt, sz); + ft_put_word(cxt, off); + ft_put_bin(cxt, data, sz); + return 0; +} + +int ft_prop_str(struct ft_cxt *cxt, const char *name, const char *str) +{ + return ft_prop(cxt, name, str, strlen(str) + 1); +} + +int ft_prop_int(struct ft_cxt *cxt, const char *name, unsigned int val) +{ + u32 v = cpu_to_be32((u32) val); + + return ft_prop(cxt, name, &v, 4); +} + +/* Calculate the size of the reserved map */ +static unsigned long rsvmap_size(struct ft_cxt *cxt) +{ + struct ft_reserve *res; + + res = (struct ft_reserve *)cxt->rgn[FT_RSVMAP].start; + while (res->start || res->len) + ++res; + return (char *)(res + 1) - cxt->rgn[FT_RSVMAP].start; +} + +/* Calculate the size of the struct region by stepping through it */ +static unsigned long struct_size(struct ft_cxt *cxt) +{ + char *p = cxt->rgn[FT_STRUCT].start; + char *next; + struct ft_atom atom; + + /* make check in ft_next happy */ + if (cxt->rgn[FT_STRUCT].size == 0) + cxt->rgn[FT_STRUCT].size = 0xfffffffful - (unsigned long)p; + + while ((next = ft_next(cxt, p, &atom)) != NULL) + p = next; + return p + 4 - cxt->rgn[FT_STRUCT].start; +} + +/* add `adj' on to all string offset values in the struct area */ +static void adjust_string_offsets(struct ft_cxt *cxt, int adj) +{ + char *p = cxt->rgn[FT_STRUCT].start; + char *next; + struct ft_atom atom; + int off; + + while ((next = ft_next(cxt, p, &atom)) != NULL) { + if (atom.tag == OF_DT_PROP) { + off = be32_to_cpu(*(u32 *) (p + 8)); + *(u32 *) (p + 8) = cpu_to_be32(off + adj); + } + p = next; + } +} + +/* start construction of the flat OF tree from scratch */ +void ft_begin(struct ft_cxt *cxt, void *blob, unsigned int max_size, + void *(*realloc_fn) (void *, unsigned long)) +{ + struct boot_param_header *bph = blob; + char *p; + struct ft_reserve *pres; + + /* clear the cxt */ + memset(cxt, 0, sizeof(*cxt)); + + cxt->bph = bph; + cxt->max_size = max_size; + cxt->realloc = realloc_fn; + cxt->isordered = 1; + + /* zero everything in the header area */ + memset(bph, 0, sizeof(*bph)); + + bph->magic = cpu_to_be32(OF_DT_HEADER); + bph->version = cpu_to_be32(0x10); + bph->last_comp_version = cpu_to_be32(0x10); + + /* start pointers */ + cxt->rgn[FT_RSVMAP].start = p = blob + HDR_SIZE; + cxt->rgn[FT_RSVMAP].size = sizeof(struct ft_reserve); + pres = (struct ft_reserve *)p; + cxt->rgn[FT_STRUCT].start = p += sizeof(struct ft_reserve); + cxt->rgn[FT_STRUCT].size = 4; + cxt->rgn[FT_STRINGS].start = blob + max_size; + cxt->rgn[FT_STRINGS].size = 0; + + /* init rsvmap and struct */ + pres->start = 0; + pres->len = 0; + *(u32 *) p = cpu_to_be32(OF_DT_END); + + cxt->str_anchor = blob; +} + +/* open up an existing blob to be examined or modified */ +int ft_open(struct ft_cxt *cxt, void *blob, unsigned int max_size, + unsigned int max_find_device, + void *(*realloc_fn) (void *, unsigned long)) +{ + struct boot_param_header *bph = blob; + + /* can't cope with version < 16 */ + if (be32_to_cpu(bph->version) < 16) + return -1; + + /* clear the cxt */ + memset(cxt, 0, sizeof(*cxt)); + + /* alloc node_tbl to track node ptrs returned by ft_find_device */ + ++max_find_device; + cxt->node_tbl = realloc_fn(NULL, max_find_device * sizeof(char *)); + if (!cxt->node_tbl) + return -1; + memset(cxt->node_tbl, 0, max_find_device * sizeof(char *)); + cxt->node_max = max_find_device; + cxt->nodes_used = 1; /* don't use idx 0 b/c looks like NULL */ + + cxt->bph = bph; + cxt->max_size = max_size; + cxt->realloc = realloc_fn; + + cxt->rgn[FT_RSVMAP].start = blob + be32_to_cpu(bph->off_mem_rsvmap); + cxt->rgn[FT_RSVMAP].size = rsvmap_size(cxt); + cxt->rgn[FT_STRUCT].start = blob + be32_to_cpu(bph->off_dt_struct); + cxt->rgn[FT_STRUCT].size = struct_size(cxt); + cxt->rgn[FT_STRINGS].start = blob + be32_to_cpu(bph->off_dt_strings); + cxt->rgn[FT_STRINGS].size = be32_to_cpu(bph->dt_strings_size); + /* Leave as '0' to force first ft_make_space call to do a ft_reorder + * and move dt to an area allocated by realloc. + cxt->isordered = ft_ordered(cxt); + */ + + cxt->p = cxt->rgn[FT_STRUCT].start; + cxt->str_anchor = cxt->rgn[FT_STRINGS].start; + + return 0; +} + +/* add a reserver physical area to the rsvmap */ +int ft_add_rsvmap(struct ft_cxt *cxt, u64 physaddr, u64 size) +{ + char *p; + struct ft_reserve *pres; + + p = cxt->rgn[FT_RSVMAP].start + cxt->rgn[FT_RSVMAP].size + - sizeof(struct ft_reserve); + if (!ft_make_space(cxt, &p, FT_RSVMAP, sizeof(struct ft_reserve))) + return -1; + + pres = (struct ft_reserve *)p; + pres->start = cpu_to_be64(physaddr); + pres->len = cpu_to_be64(size); + + return 0; +} + +void ft_begin_tree(struct ft_cxt *cxt) +{ + cxt->p = cxt->rgn[FT_STRUCT].start; +} + +void ft_end_tree(struct ft_cxt *cxt) +{ + struct boot_param_header *bph = cxt->bph; + char *p, *oldstr, *str, *endp; + unsigned long ssize; + int adj; + + if (!cxt->isordered) + return; /* we haven't touched anything */ + + /* adjust string offsets */ + oldstr = cxt->rgn[FT_STRINGS].start; + adj = cxt->str_anchor - oldstr; + if (adj) + adjust_string_offsets(cxt, adj); + + /* make strings end on 8-byte boundary */ + ssize = cxt->rgn[FT_STRINGS].size; + endp = (char *)_ALIGN((unsigned long)cxt->rgn[FT_STRUCT].start + + cxt->rgn[FT_STRUCT].size + ssize, 8); + str = endp - ssize; + + /* move strings down to end of structs */ + memmove(str, oldstr, ssize); + cxt->str_anchor = str; + cxt->rgn[FT_STRINGS].start = str; + + /* fill in header fields */ + p = (char *)bph; + bph->totalsize = cpu_to_be32(endp - p); + bph->off_mem_rsvmap = cpu_to_be32(cxt->rgn[FT_RSVMAP].start - p); + bph->off_dt_struct = cpu_to_be32(cxt->rgn[FT_STRUCT].start - p); + bph->off_dt_strings = cpu_to_be32(cxt->rgn[FT_STRINGS].start - p); + bph->dt_strings_size = cpu_to_be32(ssize); +} + +void *ft_find_device(struct ft_cxt *cxt, const char *srch_path) +{ + char *node; + + /* require absolute path */ + if (srch_path[0] != '/') + return NULL; + node = ft_find_descendent(cxt, cxt->rgn[FT_STRUCT].start, srch_path); + return ft_node_add(cxt, node); +} + +void *ft_find_descendent(struct ft_cxt *cxt, void *top, const char *srch_path) +{ + struct ft_atom atom; + char *p; + const char *cp, *q; + int cl; + int depth = -1; + int dmatch = 0; + const char *path_comp[FT_MAX_DEPTH]; + + cp = srch_path; + cl = 0; + p = top; + + while ((p = ft_next(cxt, p, &atom)) != NULL) { + switch (atom.tag) { + case OF_DT_BEGIN_NODE: + ++depth; + if (depth != dmatch) + break; + cxt->genealogy[depth] = atom.data; + cxt->genealogy[depth + 1] = NULL; + if (depth && !(strncmp(atom.name, cp, cl) == 0 + && (atom.name[cl] == '/' + || atom.name[cl] == '\0' + || atom.name[cl] == '@'))) + break; + path_comp[dmatch] = cp; + /* it matches so far, advance to next path component */ + cp += cl; + /* skip slashes */ + while (*cp == '/') + ++cp; + /* we're done if this is the end of the string */ + if (*cp == 0) + return atom.data; + /* look for end of this component */ + q = strchr(cp, '/'); + if (q) + cl = q - cp; + else + cl = strlen(cp); + ++dmatch; + break; + case OF_DT_END_NODE: + if (depth == 0) + return NULL; + if (dmatch > depth) { + --dmatch; + cl = cp - path_comp[dmatch] - 1; + cp = path_comp[dmatch]; + while (cl > 0 && cp[cl - 1] == '/') + --cl; + } + --depth; + break; + } + } + return NULL; +} + +void *ft_get_parent(struct ft_cxt *cxt, const void *phandle) +{ + void *node; + int d; + struct ft_atom atom; + char *p; + + node = ft_node_ph2node(cxt, phandle); + if (node == NULL) + return NULL; + + for (d = 0; cxt->genealogy[d] != NULL; ++d) + if (cxt->genealogy[d] == node) + return cxt->genealogy[d > 0 ? d - 1 : 0]; + + /* have to do it the hard way... */ + p = cxt->rgn[FT_STRUCT].start; + d = 0; + while ((p = ft_next(cxt, p, &atom)) != NULL) { + switch (atom.tag) { + case OF_DT_BEGIN_NODE: + cxt->genealogy[d] = atom.data; + if (node == atom.data) { + /* found it */ + cxt->genealogy[d + 1] = NULL; + return d > 0 ? cxt->genealogy[d - 1] : node; + } + ++d; + break; + case OF_DT_END_NODE: + --d; + break; + } + } + return NULL; +} + +int ft_get_prop(struct ft_cxt *cxt, const void *phandle, const char *propname, + void *buf, const unsigned int buflen) +{ + struct ft_atom atom; + void *node; + char *p; + int depth; + unsigned int size; + + node = ft_node_ph2node(cxt, phandle); + if (node == NULL) + return -1; + + depth = 0; + p = (char *)node; + + while ((p = ft_next(cxt, p, &atom)) != NULL) { + switch (atom.tag) { + case OF_DT_BEGIN_NODE: + ++depth; + break; + case OF_DT_PROP: + if ((depth != 1) || strcmp(atom.name, propname)) + break; + size = min(atom.size, buflen); + memcpy(buf, atom.data, size); + return atom.size; + case OF_DT_END_NODE: + if (--depth <= 0) + return -1; + } + } + return -1; +} + +int ft_set_prop(struct ft_cxt *cxt, const void *phandle, const char *propname, + const void *buf, const unsigned int buflen) +{ + struct ft_atom atom; + void *node; + char *p, *next; + int nextra, depth; + + node = ft_node_ph2node(cxt, phandle); + if (node == NULL) + return -1; + + depth = 0; + p = node; + + while ((next = ft_next(cxt, p, &atom)) != NULL) { + switch (atom.tag) { + case OF_DT_BEGIN_NODE: + ++depth; + break; + case OF_DT_END_NODE: + if (--depth > 0) + break; + /* haven't found the property, insert here */ + cxt->p = p; + return ft_prop(cxt, propname, buf, buflen); + case OF_DT_PROP: + if ((depth != 1) || strcmp(atom.name, propname)) + break; + /* found an existing property, overwrite it */ + nextra = _ALIGN(buflen, 4) - _ALIGN(atom.size, 4); + cxt->p = atom.data; + if (nextra && !ft_make_space(cxt, &cxt->p, FT_STRUCT, + nextra)) + return -1; + *(u32 *) (cxt->p - 8) = cpu_to_be32(buflen); + ft_put_bin(cxt, buf, buflen); + return 0; + } + p = next; + } + return -1; +} + +int ft_del_prop(struct ft_cxt *cxt, const void *phandle, const char *propname) +{ + struct ft_atom atom; + void *node; + char *p, *next; + int size; + + node = ft_node_ph2node(cxt, phandle); + if (node == NULL) + return -1; + + p = node; + while ((next = ft_next(cxt, p, &atom)) != NULL) { + switch (atom.tag) { + case OF_DT_BEGIN_NODE: + case OF_DT_END_NODE: + return -1; + case OF_DT_PROP: + if (strcmp(atom.name, propname)) + break; + /* found the property, remove it */ + size = 12 + -_ALIGN(atom.size, 4); + cxt->p = p; + if (!ft_make_space(cxt, &cxt->p, FT_STRUCT, -size)) + return -1; + return 0; + } + p = next; + } + return -1; +} + +void *ft_create_node(struct ft_cxt *cxt, const void *parent, const char *path) +{ + struct ft_atom atom; + char *p, *next; + int depth = 0; + + p = cxt->rgn[FT_STRUCT].start; + while ((next = ft_next(cxt, p, &atom)) != NULL) { + switch (atom.tag) { + case OF_DT_BEGIN_NODE: + ++depth; + if (depth == 1 && strcmp(atom.name, path) == 0) + /* duplicate node path, return error */ + return NULL; + break; + case OF_DT_END_NODE: + --depth; + if (depth > 0) + break; + /* end of node, insert here */ + cxt->p = p; + ft_begin_node(cxt, path); + ft_end_node(cxt); + return p; + } + p = next; + } + return NULL; +} diff --git a/arch/powerpc/boot/flatdevtree.h b/arch/powerpc/boot/flatdevtree.h index 761c8dc8400..b9cd9f61f35 100644 --- a/arch/powerpc/boot/flatdevtree.h +++ b/arch/powerpc/boot/flatdevtree.h @@ -17,7 +17,7 @@ #ifndef FLATDEVTREE_H #define FLATDEVTREE_H -#include "types.h" +#include "flatdevtree_env.h" /* Definitions used by the flattened device tree */ #define OF_DT_HEADER 0xd00dfeed /* marker */ @@ -43,4 +43,64 @@ struct boot_param_header { u32 dt_strings_size; /* size of the DT strings block */ }; +struct ft_reserve { + u64 start; + u64 len; +}; + +struct ft_region { + char *start; + unsigned long size; +}; + +enum ft_rgn_id { + FT_RSVMAP, + FT_STRUCT, + FT_STRINGS, + FT_N_REGION +}; + +#define FT_MAX_DEPTH 50 + +struct ft_cxt { + struct boot_param_header *bph; + int max_size; /* maximum size of tree */ + int isordered; /* everything in standard order */ + void *(*realloc)(void *, unsigned long); + char *str_anchor; + char *p; /* current insertion point in structs */ + struct ft_region rgn[FT_N_REGION]; + void *genealogy[FT_MAX_DEPTH+1]; + char **node_tbl; + unsigned int node_max; + unsigned int nodes_used; +}; + +int ft_begin_node(struct ft_cxt *cxt, const char *name); +void ft_end_node(struct ft_cxt *cxt); + +void ft_begin_tree(struct ft_cxt *cxt); +void ft_end_tree(struct ft_cxt *cxt); + +void ft_nop(struct ft_cxt *cxt); +int ft_prop(struct ft_cxt *cxt, const char *name, + const void *data, unsigned int sz); +int ft_prop_str(struct ft_cxt *cxt, const char *name, const char *str); +int ft_prop_int(struct ft_cxt *cxt, const char *name, unsigned int val); +void ft_begin(struct ft_cxt *cxt, void *blob, unsigned int max_size, + void *(*realloc_fn)(void *, unsigned long)); +int ft_open(struct ft_cxt *cxt, void *blob, unsigned int max_size, + unsigned int max_find_device, + void *(*realloc_fn)(void *, unsigned long)); +int ft_add_rsvmap(struct ft_cxt *cxt, u64 physaddr, u64 size); + +void ft_dump_blob(const void *bphp); +void ft_merge_blob(struct ft_cxt *cxt, void *blob); +void *ft_find_device(struct ft_cxt *cxt, const char *srch_path); +void *ft_find_descendent(struct ft_cxt *cxt, void *top, const char *srch_path); +int ft_get_prop(struct ft_cxt *cxt, const void *phandle, const char *propname, + void *buf, const unsigned int buflen); +int ft_set_prop(struct ft_cxt *cxt, const void *phandle, const char *propname, + const void *buf, const unsigned int buflen); + #endif /* FLATDEVTREE_H */ diff --git a/arch/powerpc/boot/flatdevtree_env.h b/arch/powerpc/boot/flatdevtree_env.h new file mode 100644 index 00000000000..83bc1c71883 --- /dev/null +++ b/arch/powerpc/boot/flatdevtree_env.h @@ -0,0 +1,47 @@ +/* + * This file adds the header file glue so that the shared files + * flatdevicetree.[ch] can compile and work in the powerpc bootwrapper. + * + * strncmp & strchr copied from + * Copyright (C) 1991, 1992 Linus Torvalds + * + * Maintained by: Mark A. Greer + */ +#ifndef _PPC_BOOT_FLATDEVTREE_ENV_H_ +#define _PPC_BOOT_FLATDEVTREE_ENV_H_ + +#include +#include +#include "types.h" +#include "string.h" +#include "stdio.h" +#include "ops.h" + +#define be16_to_cpu(x) (x) +#define cpu_to_be16(x) (x) +#define be32_to_cpu(x) (x) +#define cpu_to_be32(x) (x) +#define be64_to_cpu(x) (x) +#define cpu_to_be64(x) (x) + +static inline int strncmp(const char *cs, const char *ct, size_t count) +{ + signed char __res = 0; + + while (count) { + if ((__res = *cs - *ct++) != 0 || !*cs++) + break; + count--; + } + return __res; +} + +static inline char *strchr(const char *s, int c) +{ + for (; *s != (char)c; ++s) + if (*s == '\0') + return NULL; + return (char *)s; +} + +#endif /* _PPC_BOOT_FLATDEVTREE_ENV_H_ */ diff --git a/arch/powerpc/boot/flatdevtree_misc.c b/arch/powerpc/boot/flatdevtree_misc.c new file mode 100644 index 00000000000..c7f9adbf827 --- /dev/null +++ b/arch/powerpc/boot/flatdevtree_misc.c @@ -0,0 +1,56 @@ +/* + * This file does the necessary interface mapping between the bootwrapper + * device tree operations and the interface provided by shared source + * files flatdevicetree.[ch]. + * + * Author: Mark A. Greer + * + * 2006 (c) MontaVista Software, Inc. This file is licensed under + * the terms of the GNU General Public License version 2. This program + * is licensed "as is" without any warranty of any kind, whether express + * or implied. + */ +#include +#include "flatdevtree.h" +#include "ops.h" + +static struct ft_cxt cxt; + +static void *ft_finddevice(const char *name) +{ + return ft_find_device(&cxt, name); +} + +static int ft_getprop(const void *phandle, const char *propname, void *buf, + const int buflen) +{ + return ft_get_prop(&cxt, phandle, propname, buf, buflen); +} + +static int ft_setprop(const void *phandle, const char *propname, + const void *buf, const int buflen) +{ + return ft_set_prop(&cxt, phandle, propname, buf, buflen); +} + +static void ft_pack(void) +{ + ft_end_tree(&cxt); +} + +static unsigned long ft_addr(void) +{ + return (unsigned long)cxt.bph; +} + +int ft_init(void *dt_blob, unsigned int max_size, unsigned int max_find_device) +{ + dt_ops.finddevice = ft_finddevice; + dt_ops.getprop = ft_getprop; + dt_ops.setprop = ft_setprop; + dt_ops.ft_pack = ft_pack; + dt_ops.ft_addr = ft_addr; + + return ft_open(&cxt, dt_blob, max_size, max_find_device, + platform_ops.realloc); +} -- cgit v1.2.3-70-g09d2 From 0c176fa80fdfa9b4e0753e37223b056994c818d2 Mon Sep 17 00:00:00 2001 From: "Mark A. Greer" Date: Mon, 16 Oct 2006 13:52:09 -0700 Subject: [POWERPC] Add non-OF serial console support Add serial console support for non-OF systems. There is a generic serial console layer which calls a serial console driver. Included is the serial console driver for the ns16550 class of uarts. Necessary support routines are added as well. Signed-off-by: Mark A. Greer Signed-off-by: Paul Mackerras --- arch/powerpc/boot/Makefile | 4 +- arch/powerpc/boot/io.h | 53 +++++++++++++++++ arch/powerpc/boot/ns16550.c | 74 +++++++++++++++++++++++ arch/powerpc/boot/serial.c | 142 ++++++++++++++++++++++++++++++++++++++++++++ arch/powerpc/boot/util.S | 88 +++++++++++++++++++++++++++ 5 files changed, 359 insertions(+), 2 deletions(-) create mode 100644 arch/powerpc/boot/io.h create mode 100644 arch/powerpc/boot/ns16550.c create mode 100644 arch/powerpc/boot/serial.c create mode 100644 arch/powerpc/boot/util.S (limited to 'arch/powerpc') diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile index 8660cc50cb1..62435d951db 100644 --- a/arch/powerpc/boot/Makefile +++ b/arch/powerpc/boot/Makefile @@ -40,8 +40,8 @@ zliblinuxheader := zlib.h zconf.h zutil.h $(addprefix $(obj)/,$(zlib) main.o): $(addprefix $(obj)/,$(zliblinuxheader)) \ $(addprefix $(obj)/,$(zlibheader)) -src-wlib := string.S stdio.c main.c flatdevtree.c flatdevtree_misc.c div64.S \ - $(zlib) +src-wlib := string.S stdio.c main.c flatdevtree.c flatdevtree_misc.c \ + ns16550.c serial.c div64.S util.S $(zlib) src-plat := of.c src-boot := crt0.S $(src-wlib) $(src-plat) empty.c diff --git a/arch/powerpc/boot/io.h b/arch/powerpc/boot/io.h new file mode 100644 index 00000000000..32974ed49e0 --- /dev/null +++ b/arch/powerpc/boot/io.h @@ -0,0 +1,53 @@ +#ifndef _IO_H +#define __IO_H +/* + * Low-level I/O routines. + * + * Copied from (which has no copyright) + */ +static inline int in_8(const volatile unsigned char *addr) +{ + int ret; + + __asm__ __volatile__("lbz%U1%X1 %0,%1; twi 0,%0,0; isync" + : "=r" (ret) : "m" (*addr)); + return ret; +} + +static inline void out_8(volatile unsigned char *addr, int val) +{ + __asm__ __volatile__("stb%U0%X0 %1,%0; sync" + : "=m" (*addr) : "r" (val)); +} + +static inline unsigned in_le32(const volatile unsigned *addr) +{ + unsigned ret; + + __asm__ __volatile__("lwbrx %0,0,%1; twi 0,%0,0; isync" + : "=r" (ret) : "r" (addr), "m" (*addr)); + return ret; +} + +static inline unsigned in_be32(const volatile unsigned *addr) +{ + unsigned ret; + + __asm__ __volatile__("lwz%U1%X1 %0,%1; twi 0,%0,0; isync" + : "=r" (ret) : "m" (*addr)); + return ret; +} + +static inline void out_le32(volatile unsigned *addr, int val) +{ + __asm__ __volatile__("stwbrx %1,0,%2; sync" : "=m" (*addr) + : "r" (val), "r" (addr)); +} + +static inline void out_be32(volatile unsigned *addr, int val) +{ + __asm__ __volatile__("stw%U0%X0 %1,%0; sync" + : "=m" (*addr) : "r" (val)); +} + +#endif /* _IO_H */ diff --git a/arch/powerpc/boot/ns16550.c b/arch/powerpc/boot/ns16550.c new file mode 100644 index 00000000000..1ffe72e35cd --- /dev/null +++ b/arch/powerpc/boot/ns16550.c @@ -0,0 +1,74 @@ +/* + * 16550 serial console support. + * + * Original copied from + * (which had no copyright) + * Modifications: 2006 (c) MontaVista Software, Inc. + * + * Modified by: Mark A. Greer + */ +#include +#include +#include "types.h" +#include "string.h" +#include "stdio.h" +#include "io.h" +#include "ops.h" + +#define UART_DLL 0 /* Out: Divisor Latch Low */ +#define UART_DLM 1 /* Out: Divisor Latch High */ +#define UART_FCR 2 /* Out: FIFO Control Register */ +#define UART_LCR 3 /* Out: Line Control Register */ +#define UART_MCR 4 /* Out: Modem Control Register */ +#define UART_LSR 5 /* In: Line Status Register */ +#define UART_LSR_THRE 0x20 /* Transmit-hold-register empty */ +#define UART_LSR_DR 0x01 /* Receiver data ready */ +#define UART_MSR 6 /* In: Modem Status Register */ +#define UART_SCR 7 /* I/O: Scratch Register */ + +static unsigned char *reg_base; +static u32 reg_shift; + +static int ns16550_open(void) +{ + out_8(reg_base + (UART_FCR << reg_shift), 0x06); + return 0; +} + +static void ns16550_putc(unsigned char c) +{ + while ((in_8(reg_base + (UART_LSR << reg_shift)) & UART_LSR_THRE) == 0); + out_8(reg_base, c); +} + +static unsigned char ns16550_getc(void) +{ + while ((in_8(reg_base + (UART_LSR << reg_shift)) & UART_LSR_DR) == 0); + return in_8(reg_base); +} + +static u8 ns16550_tstc(void) +{ + return ((in_8(reg_base + (UART_LSR << reg_shift)) & UART_LSR_DR) != 0); +} + +int ns16550_console_init(void *devp, struct serial_console_data *scdp) +{ + int n; + + n = getprop(devp, "virtual-reg", ®_base, sizeof(reg_base)); + if (n != sizeof(reg_base)) + return -1; + + n = getprop(devp, "reg-shift", ®_shift, sizeof(reg_shift)); + if (n != sizeof(reg_shift)) + reg_shift = 0; + + scdp->open = ns16550_open; + scdp->putc = ns16550_putc; + scdp->getc = ns16550_getc; + scdp->tstc = ns16550_tstc; + scdp->close = NULL; + + return 0; +} diff --git a/arch/powerpc/boot/serial.c b/arch/powerpc/boot/serial.c new file mode 100644 index 00000000000..e8de4cf59be --- /dev/null +++ b/arch/powerpc/boot/serial.c @@ -0,0 +1,142 @@ +/* + * Generic serial console support + * + * Author: Mark A. Greer + * + * Code in serial_edit_cmdline() copied from + * and was written by Matt Porter . + * + * 2001,2006 (c) MontaVista Software, Inc. This file is licensed under + * the terms of the GNU General Public License version 2. This program + * is licensed "as is" without any warranty of any kind, whether express + * or implied. + */ +#include +#include +#include "types.h" +#include "string.h" +#include "stdio.h" +#include "io.h" +#include "ops.h" + +extern void udelay(long delay); + +static int serial_open(void) +{ + struct serial_console_data *scdp = console_ops.data; + return scdp->open(); +} + +static void serial_write(char *buf, int len) +{ + struct serial_console_data *scdp = console_ops.data; + + while (*buf != '\0') + scdp->putc(*buf++); +} + +static void serial_edit_cmdline(char *buf, int len) +{ + int timer = 0, count; + char ch, *cp; + struct serial_console_data *scdp = console_ops.data; + + cp = buf; + count = strlen(buf); + cp = &buf[count]; + count++; + + while (timer++ < 5*1000) { + if (scdp->tstc()) { + while (((ch = scdp->getc()) != '\n') && (ch != '\r')) { + /* Test for backspace/delete */ + if ((ch == '\b') || (ch == '\177')) { + if (cp != buf) { + cp--; + count--; + printf("\b \b"); + } + /* Test for ^x/^u (and wipe the line) */ + } else if ((ch == '\030') || (ch == '\025')) { + while (cp != buf) { + cp--; + count--; + printf("\b \b"); + } + } else if (count < len) { + *cp++ = ch; + count++; + scdp->putc(ch); + } + } + break; /* Exit 'timer' loop */ + } + udelay(1000); /* 1 msec */ + } + *cp = 0; +} + +static void serial_close(void) +{ + struct serial_console_data *scdp = console_ops.data; + + if (scdp->close) + scdp->close(); +} + +static void *serial_get_stdout_devp(void) +{ + void *devp; + char devtype[MAX_PROP_LEN]; + char path[MAX_PATH_LEN]; + + devp = finddevice("/chosen"); + if (devp == NULL) + goto err_out; + + if (getprop(devp, "linux,stdout-path", path, MAX_PATH_LEN) > 0) { + devp = finddevice(path); + if (devp == NULL) + goto err_out; + + if ((getprop(devp, "device_type", devtype, sizeof(devtype)) > 0) + && !strcmp(devtype, "serial")) + return devp; + } +err_out: + return NULL; +} + +static struct serial_console_data serial_cd; + +/* Node's "compatible" property determines which serial driver to use */ +int serial_console_init(void) +{ + void *devp; + int rc = -1; + char compat[MAX_PROP_LEN]; + + devp = serial_get_stdout_devp(); + if (devp == NULL) + goto err_out; + + if (getprop(devp, "compatible", compat, sizeof(compat)) < 0) + goto err_out; + + if (!strcmp(compat, "ns16550")) + rc = ns16550_console_init(devp, &serial_cd); + + /* Add other serial console driver calls here */ + + if (!rc) { + console_ops.open = serial_open; + console_ops.write = serial_write; + console_ops.edit_cmdline = serial_edit_cmdline; + console_ops.close = serial_close; + console_ops.data = &serial_cd; + + return 0; + } +err_out: + return -1; +} diff --git a/arch/powerpc/boot/util.S b/arch/powerpc/boot/util.S new file mode 100644 index 00000000000..427ddfc1199 --- /dev/null +++ b/arch/powerpc/boot/util.S @@ -0,0 +1,88 @@ +/* + * Copied from + * + * This file contains miscellaneous low-level functions. + * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org) + * + * Largely rewritten by Cort Dougan (cort@cs.nmt.edu) + * and Paul Mackerras. + * + * kexec bits: + * Copyright (C) 2002-2003 Eric Biederman + * GameCube/ppc32 port Copyright (C) 2004 Albert Herranz + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + */ +#include "ppc_asm.h" + +#define SPRN_PVR 0x11F /* Processor Version Register */ + + .text + +/* udelay (on non-601 processors) needs to know the period of the + * timebase in nanoseconds. This used to be hardcoded to be 60ns + * (period of 66MHz/4). Now a variable is used that is initialized to + * 60 for backward compatibility, but it can be overridden as necessary + * with code something like this: + * extern unsigned long timebase_period_ns; + * timebase_period_ns = 1000000000 / bd->bi_tbfreq; + */ + .data + .globl timebase_period_ns +timebase_period_ns: + .long 60 + + .text +/* + * Delay for a number of microseconds + */ + .globl udelay +udelay: + mfspr r4,SPRN_PVR + srwi r4,r4,16 + cmpwi 0,r4,1 /* 601 ? */ + bne .udelay_not_601 +00: li r0,86 /* Instructions / microsecond? */ + mtctr r0 +10: addi r0,r0,0 /* NOP */ + bdnz 10b + subic. r3,r3,1 + bne 00b + blr + +.udelay_not_601: + mulli r4,r3,1000 /* nanoseconds */ + /* Change r4 to be the number of ticks using: + * (nanoseconds + (timebase_period_ns - 1 )) / timebase_period_ns + * timebase_period_ns defaults to 60 (16.6MHz) */ + mflr r5 + bl 0f +0: mflr r6 + mtlr r5 + lis r5,0b@ha + addi r5,r5,0b@l + subf r5,r5,r6 /* In case we're relocated */ + addis r5,r5,timebase_period_ns@ha + lwz r5,timebase_period_ns@l(r5) + add r4,r4,r5 + addi r4,r4,-1 + divw r4,r4,r5 /* BUS ticks */ +1: mftbu r5 + mftb r6 + mftbu r7 + cmpw 0,r5,r7 + bne 1b /* Get [synced] base time */ + addc r9,r6,r4 /* Compute end time */ + addze r8,r5 +2: mftbu r5 + cmpw 0,r5,r8 + blt 2b + bgt 3f + mftb r6 + cmpw 0,r6,r9 + blt 2b +3: blr -- cgit v1.2.3-70-g09d2 From 01a6372008ed450982ba38ee5fd91028b9f5a781 Mon Sep 17 00:00:00 2001 From: "Mark A. Greer" Date: Mon, 16 Oct 2006 13:54:52 -0700 Subject: [POWERPC] Add simple memory allocator to bootwrapper Provide primitive malloc, free, and realloc functions for bootwrapper. Signed-off-by: Mark A. Greer Signed-off-by: Paul Mackerras --- arch/powerpc/boot/Makefile | 2 +- arch/powerpc/boot/simple_alloc.c | 149 +++++++++++++++++++++++++++++++++++++++ 2 files changed, 150 insertions(+), 1 deletion(-) create mode 100644 arch/powerpc/boot/simple_alloc.c (limited to 'arch/powerpc') diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile index 62435d951db..9731c25c54a 100644 --- a/arch/powerpc/boot/Makefile +++ b/arch/powerpc/boot/Makefile @@ -41,7 +41,7 @@ $(addprefix $(obj)/,$(zlib) main.o): $(addprefix $(obj)/,$(zliblinuxheader)) \ $(addprefix $(obj)/,$(zlibheader)) src-wlib := string.S stdio.c main.c flatdevtree.c flatdevtree_misc.c \ - ns16550.c serial.c div64.S util.S $(zlib) + ns16550.c serial.c simple_alloc.c div64.S util.S $(zlib) src-plat := of.c src-boot := crt0.S $(src-wlib) $(src-plat) empty.c diff --git a/arch/powerpc/boot/simple_alloc.c b/arch/powerpc/boot/simple_alloc.c new file mode 100644 index 00000000000..cfe3a7505ba --- /dev/null +++ b/arch/powerpc/boot/simple_alloc.c @@ -0,0 +1,149 @@ +/* + * Implement primitive realloc(3) functionality. + * + * Author: Mark A. Greer + * + * 2006 (c) MontaVista, Software, Inc. This file is licensed under + * the terms of the GNU General Public License version 2. This program + * is licensed "as is" without any warranty of any kind, whether express + * or implied. + */ + +#include +#include "types.h" +#include "page.h" +#include "string.h" +#include "ops.h" + +#define ENTRY_BEEN_USED 0x01 +#define ENTRY_IN_USE 0x02 + +static struct alloc_info { + u32 flags; + u32 base; + u32 size; +} *alloc_tbl; + +static u32 tbl_entries; +static u32 alloc_min; +static u32 next_base; +static u32 space_left; + +/* + * First time an entry is used, its base and size are set. + * An entry can be freed and re-malloc'd but its base & size don't change. + * Should be smart enough for needs of bootwrapper. + */ +static void *simple_malloc(u32 size) +{ + u32 i; + struct alloc_info *p = alloc_tbl; + + if (size == 0) + goto err_out; + + size = _ALIGN_UP(size, alloc_min); + + for (i=0; iflags & ENTRY_BEEN_USED)) { /* never been used */ + if (size <= space_left) { + p->base = next_base; + p->size = size; + p->flags = ENTRY_BEEN_USED | ENTRY_IN_USE; + next_base += size; + space_left -= size; + return (void *)p->base; + } + goto err_out; /* not enough space left */ + } + /* reuse an entry keeping same base & size */ + else if (!(p->flags & ENTRY_IN_USE) && (size <= p->size)) { + p->flags |= ENTRY_IN_USE; + return (void *)p->base; + } +err_out: + return NULL; +} + +static struct alloc_info *simple_find_entry(void *ptr) +{ + u32 i; + struct alloc_info *p = alloc_tbl; + + for (i=0; iflags & ENTRY_BEEN_USED)) + break; + if ((p->flags & ENTRY_IN_USE) && (p->base == (u32)ptr)) + return p; + } + return NULL; +} + +static void simple_free(void *ptr) +{ + struct alloc_info *p = simple_find_entry(ptr); + + if (p != NULL) + p->flags &= ~ENTRY_IN_USE; +} + +/* + * Change size of area pointed to by 'ptr' to 'size'. + * If 'ptr' is NULL, then its a malloc(). If 'size' is 0, then its a free(). + * 'ptr' must be NULL or a pointer to a non-freed area previously returned by + * simple_realloc() or simple_malloc(). + */ +static void *simple_realloc(void *ptr, unsigned long size) +{ + struct alloc_info *p; + void *new; + + if (size == 0) { + simple_free(ptr); + return NULL; + } + + if (ptr == NULL) + return simple_malloc(size); + + p = simple_find_entry(ptr); + if (p == NULL) /* ptr not from simple_malloc/simple_realloc */ + return NULL; + if (size <= p->size) /* fits in current block */ + return ptr; + + new = simple_malloc(size); + memcpy(new, ptr, p->size); + simple_free(ptr); + return new; +} + +/* + * Returns addr of first byte after heap so caller can see if it took + * too much space. If so, change args & try again. + */ +void *simple_alloc_init(char *base, u32 heap_size, u32 granularity, + u32 max_allocs) +{ + u32 heap_base, tbl_size; + + heap_size = _ALIGN_UP(heap_size, granularity); + alloc_min = granularity; + tbl_entries = max_allocs; + + tbl_size = tbl_entries * sizeof(struct alloc_info); + + alloc_tbl = (struct alloc_info *)_ALIGN_UP((unsigned long)base, 8); + memset(alloc_tbl, 0, tbl_size); + + heap_base = _ALIGN_UP((u32)alloc_tbl + tbl_size, alloc_min); + + next_base = heap_base; + space_left = heap_size; + + platform_ops.malloc = simple_malloc; + platform_ops.free = simple_free; + platform_ops.realloc = simple_realloc; + + return (void *)(heap_base + heap_size); +} -- cgit v1.2.3-70-g09d2 From 0cfcccb4687862a34eb609d16e75b39b6cb54c80 Mon Sep 17 00:00:00 2001 From: Josh Boyer Date: Fri, 13 Oct 2006 10:07:01 -0500 Subject: [POWERPC] Add mktree utility to arch/powerpc/boot This patch adds the mktree program that is needed to post process zImage wrappers for various PowerPC 4xx boards Signed-off-by: Josh Boyer Signed-off-by: Paul Mackerras --- arch/powerpc/boot/Makefile | 4 +- arch/powerpc/boot/mktree.c | 152 +++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 154 insertions(+), 2 deletions(-) create mode 100644 arch/powerpc/boot/mktree.c (limited to 'arch/powerpc') diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile index 9731c25c54a..1e71a452b17 100644 --- a/arch/powerpc/boot/Makefile +++ b/arch/powerpc/boot/Makefile @@ -94,13 +94,13 @@ $(patsubst %.S,%.o, $(filter %.S, $(src-boot))): %.o: %.S $(obj)/wrapper.a: $(obj-wlib) $(call cmd,bootar) -hostprogs-y := addnote addRamDisk hack-coff +hostprogs-y := addnote addRamDisk hack-coff mktree extra-y := $(obj)/crt0.o $(obj)/wrapper.a $(obj-plat) $(obj)/empty.o \ $(obj)/zImage.lds $(obj)/zImage.coff.lds wrapper :=$(srctree)/$(src)/wrapper -wrapperbits := $(extra-y) $(addprefix $(obj)/,addnote hack-coff) +wrapperbits := $(extra-y) $(addprefix $(obj)/,addnote hack-coff mktree) ############# # Bits for building various flavours of zImage diff --git a/arch/powerpc/boot/mktree.c b/arch/powerpc/boot/mktree.c new file mode 100644 index 00000000000..4cb89299365 --- /dev/null +++ b/arch/powerpc/boot/mktree.c @@ -0,0 +1,152 @@ +/* + * Makes a tree bootable image for IBM Evaluation boards. + * Basically, just take a zImage, skip the ELF header, and stuff + * a 32 byte header on the front. + * + * We use htonl, which is a network macro, to make sure we're doing + * The Right Thing on an LE machine. It's non-obvious, but it should + * work on anything BSD'ish. + */ + +#include +#include +#include +#include +#include +#include +#include +#ifdef __sun__ +#include +#else +#include +#endif + +/* This gets tacked on the front of the image. There are also a few + * bytes allocated after the _start label used by the boot rom (see + * head.S for details). + */ +typedef struct boot_block { + uint32_t bb_magic; /* 0x0052504F */ + uint32_t bb_dest; /* Target address of the image */ + uint32_t bb_num_512blocks; /* Size, rounded-up, in 512 byte blks */ + uint32_t bb_debug_flag; /* Run debugger or image after load */ + uint32_t bb_entry_point; /* The image address to start */ + uint32_t bb_checksum; /* 32 bit checksum including header */ + uint32_t reserved[2]; +} boot_block_t; + +#define IMGBLK 512 +char tmpbuf[IMGBLK]; + +int main(int argc, char *argv[]) +{ + int in_fd, out_fd; + int nblks, i; + uint cksum, *cp; + struct stat st; + boot_block_t bt; + + if (argc < 3) { + fprintf(stderr, "usage: %s [entry-point]\n",argv[0]); + exit(1); + } + + if (stat(argv[1], &st) < 0) { + perror("stat"); + exit(2); + } + + nblks = (st.st_size + IMGBLK) / IMGBLK; + + bt.bb_magic = htonl(0x0052504F); + + /* If we have the optional entry point parameter, use it */ + if (argc == 4) + bt.bb_dest = bt.bb_entry_point = htonl(strtoul(argv[3], NULL, 0)); + else + bt.bb_dest = bt.bb_entry_point = htonl(0x500000); + + /* We know these from the linker command. + * ...and then move it up into memory a little more so the + * relocation can happen. + */ + bt.bb_num_512blocks = htonl(nblks); + bt.bb_debug_flag = 0; + + bt.bb_checksum = 0; + + /* To be neat and tidy :-). + */ + bt.reserved[0] = 0; + bt.reserved[1] = 0; + + if ((in_fd = open(argv[1], O_RDONLY)) < 0) { + perror("zImage open"); + exit(3); + } + + if ((out_fd = open(argv[2], (O_RDWR | O_CREAT | O_TRUNC), 0666)) < 0) { + perror("bootfile open"); + exit(3); + } + + cksum = 0; + cp = (void *)&bt; + for (i=0; i 0) { + if (read(in_fd, tmpbuf, IMGBLK) < 0) { + perror("zImage read"); + exit(5); + } + cp = (uint *)tmpbuf; + for (i=0; i Date: Mon, 16 Oct 2006 16:03:33 -0500 Subject: [POWERPC] Fix up the OF functions to only do PCI stuff if PCI is actually configured The original problem that inspired this patch was solved quite some time ago (Turning off PCI didn't work), but this patch neatens things up a little (I think), by putting all the PCI stuff inside a single CONFIG_PCI block. It also removes the OF PCI bus matching entries if CONFIG_PCI is off. Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/prom_parse.c | 288 ++++++++++++++++++++------------------- 1 file changed, 148 insertions(+), 140 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/kernel/prom_parse.c b/arch/powerpc/kernel/prom_parse.c index 603dff3ad62..346fb7bf9a0 100644 --- a/arch/powerpc/kernel/prom_parse.c +++ b/arch/powerpc/kernel/prom_parse.c @@ -25,6 +25,12 @@ #define OF_CHECK_COUNTS(na, ns) ((na) > 0 && (na) <= OF_MAX_ADDR_CELLS && \ (ns) > 0) +static struct of_bus *of_match_bus(struct device_node *np); +static int __of_address_to_resource(struct device_node *dev, + const u32 *addrp, u64 size, unsigned int flags, + struct resource *r); + + /* Debug utility */ #ifdef DEBUG static void of_dump_addr(const char *s, const u32 *addr, int na) @@ -101,6 +107,7 @@ static unsigned int of_bus_default_get_flags(const u32 *addr) } +#ifdef CONFIG_PCI /* * PCI bus specific translator */ @@ -162,6 +169,145 @@ static unsigned int of_bus_pci_get_flags(const u32 *addr) return flags; } +const u32 *of_get_pci_address(struct device_node *dev, int bar_no, u64 *size, + unsigned int *flags) +{ + const u32 *prop; + unsigned int psize; + struct device_node *parent; + struct of_bus *bus; + int onesize, i, na, ns; + + /* Get parent & match bus type */ + parent = of_get_parent(dev); + if (parent == NULL) + return NULL; + bus = of_match_bus(parent); + if (strcmp(bus->name, "pci")) { + of_node_put(parent); + return NULL; + } + bus->count_cells(dev, &na, &ns); + of_node_put(parent); + if (!OF_CHECK_COUNTS(na, ns)) + return NULL; + + /* Get "reg" or "assigned-addresses" property */ + prop = get_property(dev, bus->addresses, &psize); + if (prop == NULL) + return NULL; + psize /= 4; + + onesize = na + ns; + for (i = 0; psize >= onesize; psize -= onesize, prop += onesize, i++) + if ((prop[0] & 0xff) == ((bar_no * 4) + PCI_BASE_ADDRESS_0)) { + if (size) + *size = of_read_number(prop + na, ns); + if (flags) + *flags = bus->get_flags(prop); + return prop; + } + return NULL; +} +EXPORT_SYMBOL(of_get_pci_address); + +int of_pci_address_to_resource(struct device_node *dev, int bar, + struct resource *r) +{ + const u32 *addrp; + u64 size; + unsigned int flags; + + addrp = of_get_pci_address(dev, bar, &size, &flags); + if (addrp == NULL) + return -EINVAL; + return __of_address_to_resource(dev, addrp, size, flags, r); +} +EXPORT_SYMBOL_GPL(of_pci_address_to_resource); + +static u8 of_irq_pci_swizzle(u8 slot, u8 pin) +{ + return (((pin - 1) + slot) % 4) + 1; +} + +int of_irq_map_pci(struct pci_dev *pdev, struct of_irq *out_irq) +{ + struct device_node *dn, *ppnode; + struct pci_dev *ppdev; + u32 lspec; + u32 laddr[3]; + u8 pin; + int rc; + + /* Check if we have a device node, if yes, fallback to standard OF + * parsing + */ + dn = pci_device_to_OF_node(pdev); + if (dn) + return of_irq_map_one(dn, 0, out_irq); + + /* Ok, we don't, time to have fun. Let's start by building up an + * interrupt spec. we assume #interrupt-cells is 1, which is standard + * for PCI. If you do different, then don't use that routine. + */ + rc = pci_read_config_byte(pdev, PCI_INTERRUPT_PIN, &pin); + if (rc != 0) + return rc; + /* No pin, exit */ + if (pin == 0) + return -ENODEV; + + /* Now we walk up the PCI tree */ + lspec = pin; + for (;;) { + /* Get the pci_dev of our parent */ + ppdev = pdev->bus->self; + + /* Ouch, it's a host bridge... */ + if (ppdev == NULL) { +#ifdef CONFIG_PPC64 + ppnode = pci_bus_to_OF_node(pdev->bus); +#else + struct pci_controller *host; + host = pci_bus_to_host(pdev->bus); + ppnode = host ? host->arch_data : NULL; +#endif + /* No node for host bridge ? give up */ + if (ppnode == NULL) + return -EINVAL; + } else + /* We found a P2P bridge, check if it has a node */ + ppnode = pci_device_to_OF_node(ppdev); + + /* Ok, we have found a parent with a device-node, hand over to + * the OF parsing code. + * We build a unit address from the linux device to be used for + * resolution. Note that we use the linux bus number which may + * not match your firmware bus numbering. + * Fortunately, in most cases, interrupt-map-mask doesn't include + * the bus number as part of the matching. + * You should still be careful about that though if you intend + * to rely on this function (you ship a firmware that doesn't + * create device nodes for all PCI devices). + */ + if (ppnode) + break; + + /* We can only get here if we hit a P2P bridge with no node, + * let's do standard swizzling and try again + */ + lspec = of_irq_pci_swizzle(PCI_SLOT(pdev->devfn), lspec); + pdev = ppdev; + } + + laddr[0] = (pdev->bus->number << 16) + | (pdev->devfn << 8); + laddr[1] = laddr[2] = 0; + return of_irq_map_raw(ppnode, &lspec, 1, laddr, out_irq); +} +EXPORT_SYMBOL_GPL(of_irq_map_pci); +#endif /* CONFIG_PCI */ + /* * ISA bus specific translator */ @@ -223,6 +369,7 @@ static unsigned int of_bus_isa_get_flags(const u32 *addr) */ static struct of_bus of_busses[] = { +#ifdef CONFIG_PCI /* PCI */ { .name = "pci", @@ -233,6 +380,7 @@ static struct of_bus of_busses[] = { .translate = of_bus_pci_translate, .get_flags = of_bus_pci_get_flags, }, +#endif /* CONFIG_PCI */ /* ISA */ { .name = "isa", @@ -445,48 +593,6 @@ const u32 *of_get_address(struct device_node *dev, int index, u64 *size, } EXPORT_SYMBOL(of_get_address); -const u32 *of_get_pci_address(struct device_node *dev, int bar_no, u64 *size, - unsigned int *flags) -{ - const u32 *prop; - unsigned int psize; - struct device_node *parent; - struct of_bus *bus; - int onesize, i, na, ns; - - /* Get parent & match bus type */ - parent = of_get_parent(dev); - if (parent == NULL) - return NULL; - bus = of_match_bus(parent); - if (strcmp(bus->name, "pci")) { - of_node_put(parent); - return NULL; - } - bus->count_cells(dev, &na, &ns); - of_node_put(parent); - if (!OF_CHECK_COUNTS(na, ns)) - return NULL; - - /* Get "reg" or "assigned-addresses" property */ - prop = get_property(dev, bus->addresses, &psize); - if (prop == NULL) - return NULL; - psize /= 4; - - onesize = na + ns; - for (i = 0; psize >= onesize; psize -= onesize, prop += onesize, i++) - if ((prop[0] & 0xff) == ((bar_no * 4) + PCI_BASE_ADDRESS_0)) { - if (size) - *size = of_read_number(prop + na, ns); - if (flags) - *flags = bus->get_flags(prop); - return prop; - } - return NULL; -} -EXPORT_SYMBOL(of_get_pci_address); - static int __of_address_to_resource(struct device_node *dev, const u32 *addrp, u64 size, unsigned int flags, struct resource *r) @@ -529,20 +635,6 @@ int of_address_to_resource(struct device_node *dev, int index, } EXPORT_SYMBOL_GPL(of_address_to_resource); -int of_pci_address_to_resource(struct device_node *dev, int bar, - struct resource *r) -{ - const u32 *addrp; - u64 size; - unsigned int flags; - - addrp = of_get_pci_address(dev, bar, &size, &flags); - if (addrp == NULL) - return -EINVAL; - return __of_address_to_resource(dev, addrp, size, flags, r); -} -EXPORT_SYMBOL_GPL(of_pci_address_to_resource); - void of_parse_dma_window(struct device_node *dn, const void *dma_window_prop, unsigned long *busno, unsigned long *phys, unsigned long *size) { @@ -898,87 +990,3 @@ int of_irq_map_one(struct device_node *device, int index, struct of_irq *out_irq return res; } EXPORT_SYMBOL_GPL(of_irq_map_one); - -#ifdef CONFIG_PCI -static u8 of_irq_pci_swizzle(u8 slot, u8 pin) -{ - return (((pin - 1) + slot) % 4) + 1; -} - -int of_irq_map_pci(struct pci_dev *pdev, struct of_irq *out_irq) -{ - struct device_node *dn, *ppnode; - struct pci_dev *ppdev; - u32 lspec; - u32 laddr[3]; - u8 pin; - int rc; - - /* Check if we have a device node, if yes, fallback to standard OF - * parsing - */ - dn = pci_device_to_OF_node(pdev); - if (dn) - return of_irq_map_one(dn, 0, out_irq); - - /* Ok, we don't, time to have fun. Let's start by building up an - * interrupt spec. we assume #interrupt-cells is 1, which is standard - * for PCI. If you do different, then don't use that routine. - */ - rc = pci_read_config_byte(pdev, PCI_INTERRUPT_PIN, &pin); - if (rc != 0) - return rc; - /* No pin, exit */ - if (pin == 0) - return -ENODEV; - - /* Now we walk up the PCI tree */ - lspec = pin; - for (;;) { - /* Get the pci_dev of our parent */ - ppdev = pdev->bus->self; - - /* Ouch, it's a host bridge... */ - if (ppdev == NULL) { -#ifdef CONFIG_PPC64 - ppnode = pci_bus_to_OF_node(pdev->bus); -#else - struct pci_controller *host; - host = pci_bus_to_host(pdev->bus); - ppnode = host ? host->arch_data : NULL; -#endif - /* No node for host bridge ? give up */ - if (ppnode == NULL) - return -EINVAL; - } else - /* We found a P2P bridge, check if it has a node */ - ppnode = pci_device_to_OF_node(ppdev); - - /* Ok, we have found a parent with a device-node, hand over to - * the OF parsing code. - * We build a unit address from the linux device to be used for - * resolution. Note that we use the linux bus number which may - * not match your firmware bus numbering. - * Fortunately, in most cases, interrupt-map-mask doesn't include - * the bus number as part of the matching. - * You should still be careful about that though if you intend - * to rely on this function (you ship a firmware that doesn't - * create device nodes for all PCI devices). - */ - if (ppnode) - break; - - /* We can only get here if we hit a P2P bridge with no node, - * let's do standard swizzling and try again - */ - lspec = of_irq_pci_swizzle(PCI_SLOT(pdev->devfn), lspec); - pdev = ppdev; - } - - laddr[0] = (pdev->bus->number << 16) - | (pdev->devfn << 8); - laddr[1] = laddr[2] = 0; - return of_irq_map_raw(ppnode, &lspec, 1, laddr, out_irq); -} -EXPORT_SYMBOL_GPL(of_irq_map_pci); -#endif /* CONFIG_PCI */ -- cgit v1.2.3-70-g09d2 From 41999295b6c25d799dacbbca089fdbc19f6d60f5 Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Wed, 18 Oct 2006 15:53:20 +1000 Subject: [POWERPC] Move iSeries initrd logic into device tree Remove the iSeries initrd logic, instead just store the initrd location and size in the device tree so generic code can do the rest for us. The iSeries code had a "feature" which the generic code lacks, ie. if the compressed initrd is bigger than the configured ram disk size, we make the ram disk size bigger. That's bogus, as the compressed size of the initrd tells us nothing about how big the ram disk needs to be. If the ram disk isn't big enough you just need to make CONFIG_BLK_DEV_RAM_SIZE larger. Signed-off-by: Michael Ellerman Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/iseries/dt.c | 15 +++++++++++++-- arch/powerpc/platforms/iseries/setup.c | 32 -------------------------------- 2 files changed, 13 insertions(+), 34 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/platforms/iseries/dt.c b/arch/powerpc/platforms/iseries/dt.c index e305deee7f4..9e8a334a518 100644 --- a/arch/powerpc/platforms/iseries/dt.c +++ b/arch/powerpc/platforms/iseries/dt.c @@ -41,6 +41,7 @@ #include "call_pci.h" #include "pci.h" #include "it_exp_vpd_panel.h" +#include "naca.h" #ifdef DEBUG #define DBG(fmt...) udbg_printf(fmt) @@ -205,13 +206,11 @@ static void __init dt_prop_u32(struct iseries_flat_dt *dt, const char *name, dt_prop(dt, name, &data, sizeof(u32)); } -#ifdef notyet static void __init dt_prop_u64(struct iseries_flat_dt *dt, const char *name, u64 data) { dt_prop(dt, name, &data, sizeof(u64)); } -#endif static void __init dt_prop_u64_list(struct iseries_flat_dt *dt, const char *name, u64 *data, int n) @@ -306,6 +305,17 @@ static void __init dt_model(struct iseries_flat_dt *dt) dt_prop_u32(dt, "ibm,partition-no", HvLpConfig_getLpIndex()); } +static void __init dt_initrd(struct iseries_flat_dt *dt) +{ +#ifdef CONFIG_BLK_DEV_INITRD + if (naca.xRamDisk) { + dt_prop_u64(dt, "linux,initrd-start", (u64)naca.xRamDisk); + dt_prop_u64(dt, "linux,initrd-end", + (u64)naca.xRamDisk + naca.xRamDiskSize * HW_PAGE_SIZE); + } +#endif +} + static void __init dt_do_vdevice(struct iseries_flat_dt *dt, const char *name, u32 reg, int unit, const char *type, const char *compat, int end) @@ -641,6 +651,7 @@ void * __init build_flat_dt(unsigned long phys_mem_size) /* /chosen */ dt_start_node(iseries_dt, "chosen"); dt_prop_str(iseries_dt, "bootargs", cmd_line); + dt_initrd(iseries_dt); dt_end_node(iseries_dt); dt_cpus(iseries_dt); diff --git a/arch/powerpc/platforms/iseries/setup.c b/arch/powerpc/platforms/iseries/setup.c index a0ff7ba7d66..08d14734617 100644 --- a/arch/powerpc/platforms/iseries/setup.c +++ b/arch/powerpc/platforms/iseries/setup.c @@ -21,7 +21,6 @@ #include #include #include -#include #include #include #include @@ -80,8 +79,6 @@ extern void iSeries_pci_final_fixup(void); static void iSeries_pci_final_fixup(void) { } #endif -extern int rd_size; /* Defined in drivers/block/rd.c */ - extern unsigned long iSeries_recal_tb; extern unsigned long iSeries_recal_titan; @@ -295,24 +292,6 @@ static void __init iSeries_init_early(void) { DBG(" -> iSeries_init_early()\n"); -#if defined(CONFIG_BLK_DEV_INITRD) - /* - * If the init RAM disk has been configured and there is - * a non-zero starting address for it, set it up - */ - if (naca.xRamDisk) { - initrd_start = (unsigned long)__va(naca.xRamDisk); - initrd_end = initrd_start + naca.xRamDiskSize * HW_PAGE_SIZE; - initrd_below_start_ok = 1; // ramdisk in kernel space - ROOT_DEV = Root_RAM0; - if (((rd_size * 1024) / HW_PAGE_SIZE) < naca.xRamDiskSize) - rd_size = (naca.xRamDiskSize * HW_PAGE_SIZE) / 1024; - } else -#endif /* CONFIG_BLK_DEV_INITRD */ - { - /* ROOT_DEV = MKDEV(VIODASD_MAJOR, 1); */ - } - iSeries_recal_tb = get_tb(); iSeries_recal_titan = HvCallXm_loadTod(); @@ -331,17 +310,6 @@ static void __init iSeries_init_early(void) mf_init(); - /* If we were passed an initrd, set the ROOT_DEV properly if the values - * look sensible. If not, clear initrd reference. - */ -#ifdef CONFIG_BLK_DEV_INITRD - if (initrd_start >= KERNELBASE && initrd_end >= KERNELBASE && - initrd_end > initrd_start) - ROOT_DEV = Root_RAM0; - else - initrd_start = initrd_end = 0; -#endif /* CONFIG_BLK_DEV_INITRD */ - DBG(" <- iSeries_init_early()\n"); } -- cgit v1.2.3-70-g09d2 From a0f467261ae041864414103b8dd6fc4487a3c7de Mon Sep 17 00:00:00 2001 From: Matthew McClintock Date: Mon, 23 Oct 2006 14:26:57 -0500 Subject: [POWERPC] Fixed some missing files to be deleted when running make clean Fixed some missing files to be deleted when running make clean Signed-off-by: Matthew McClintock Signed-off-by: Paul Mackerras --- arch/powerpc/boot/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile index 1e71a452b17..789def38af4 100644 --- a/arch/powerpc/boot/Makefile +++ b/arch/powerpc/boot/Makefile @@ -75,7 +75,7 @@ $(obj)/zImage.lds $(obj)/zImage.coff.lds: $(obj)/%: $(srctree)/$(src)/%.S @cp $< $@ clean-files := $(zlib) $(zlibheader) $(zliblinuxheader) \ - $(obj)/empty.c + empty.c zImage.coff.lds zImage.lds zImage.sandpoint quiet_cmd_bootcc = BOOTCC $@ cmd_bootcc = $(CROSS32CC) -Wp,-MD,$(depfile) $(BOOTCFLAGS) -c -o $@ $< -- cgit v1.2.3-70-g09d2 From 5414c6be57dd02e089c3eba1f5134f441733d013 Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Tue, 24 Oct 2006 13:37:34 +1000 Subject: [POWERPC] Make irq_dispose_mapping(NO_IRQ) a nop It makes for a friendlier API if irq_dispose_mapping(NO_IRQ) is a nop, rather than triggering a WARN_ON. Signed-off-by: Michael Ellerman Acked-by: Benjamin Herrenschmidt Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/irq.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/kernel/irq.c b/arch/powerpc/kernel/irq.c index 67b21a008f6..eb9fc621e05 100644 --- a/arch/powerpc/kernel/irq.c +++ b/arch/powerpc/kernel/irq.c @@ -648,10 +648,14 @@ EXPORT_SYMBOL_GPL(irq_of_parse_and_map); void irq_dispose_mapping(unsigned int virq) { - struct irq_host *host = irq_map[virq].host; + struct irq_host *host; irq_hw_number_t hwirq; unsigned long flags; + if (virq == NO_IRQ) + return; + + host = irq_map[virq].host; WARN_ON (host == NULL); if (host == NULL) return; -- cgit v1.2.3-70-g09d2 From 24f43b33f74c8e8c8aabc40b728eaf9137802942 Mon Sep 17 00:00:00 2001 From: Masato Noguchi Date: Tue, 24 Oct 2006 18:31:14 +0200 Subject: [POWERPC] spufs: wrap mfc sdr access SPRN_SDR1 and the SPE's MFC SDR are hypervisor resources and are not accessible from a logical partition. This change adds an access wrapper. When running on bare H/W, the spufs needs to only set the SPE's MFC SDR to the value of the PPE's SPRN_SDR1 once at SPE initialization, so this change renames mfc_sdr_set() to mfc_sdr_setup() and moves the access of SPRN_SDR1 into the mmio wrapper. It also removes the now unneeded member mfc_sdr_RW from struct spu_priv1_collapsed. Signed-off-by: Masato Noguchi Signed-off-by: Geoff Levand Signed-off-by: Arnd Bergmann -- Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/cell/spu_base.c | 2 +- arch/powerpc/platforms/cell/spu_priv1_mmio.c | 6 +++--- arch/powerpc/platforms/cell/spufs/switch.c | 3 --- include/asm-powerpc/spu_csa.h | 1 - include/asm-powerpc/spu_priv1.h | 6 +++--- 5 files changed, 7 insertions(+), 11 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/platforms/cell/spu_base.c b/arch/powerpc/platforms/cell/spu_base.c index d0fb959e3ef..d41ad1d6c04 100644 --- a/arch/powerpc/platforms/cell/spu_base.c +++ b/arch/powerpc/platforms/cell/spu_base.c @@ -805,7 +805,7 @@ static int __init create_spu(struct device_node *spe) if (ret) goto out_unmap; spin_lock_init(&spu->register_lock); - spu_mfc_sdr_set(spu, mfspr(SPRN_SDR1)); + spu_mfc_sdr_setup(spu); spu_mfc_sr1_set(spu, 0x33); mutex_lock(&spu_mutex); diff --git a/arch/powerpc/platforms/cell/spu_priv1_mmio.c b/arch/powerpc/platforms/cell/spu_priv1_mmio.c index 71b69f0a1a4..90011f9aab3 100644 --- a/arch/powerpc/platforms/cell/spu_priv1_mmio.c +++ b/arch/powerpc/platforms/cell/spu_priv1_mmio.c @@ -84,9 +84,9 @@ static void mfc_dsisr_set(struct spu *spu, u64 dsisr) out_be64(&spu->priv1->mfc_dsisr_RW, dsisr); } -static void mfc_sdr_set(struct spu *spu, u64 sdr) +static void mfc_sdr_setup(struct spu *spu) { - out_be64(&spu->priv1->mfc_sdr_RW, sdr); + out_be64(&spu->priv1->mfc_sdr_RW, mfspr(SPRN_SDR1)); } static void mfc_sr1_set(struct spu *spu, u64 sr1) @@ -146,7 +146,7 @@ const struct spu_priv1_ops spu_priv1_mmio_ops = .mfc_dar_get = mfc_dar_get, .mfc_dsisr_get = mfc_dsisr_get, .mfc_dsisr_set = mfc_dsisr_set, - .mfc_sdr_set = mfc_sdr_set, + .mfc_sdr_setup = mfc_sdr_setup, .mfc_sr1_set = mfc_sr1_set, .mfc_sr1_get = mfc_sr1_get, .mfc_tclass_id_set = mfc_tclass_id_set, diff --git a/arch/powerpc/platforms/cell/spufs/switch.c b/arch/powerpc/platforms/cell/spufs/switch.c index 0f782ca662b..b85347ff6b2 100644 --- a/arch/powerpc/platforms/cell/spufs/switch.c +++ b/arch/powerpc/platforms/cell/spufs/switch.c @@ -2165,9 +2165,6 @@ static void init_priv1(struct spu_state *csa) MFC_STATE1_PROBLEM_STATE_MASK | MFC_STATE1_RELOCATE_MASK | MFC_STATE1_BUS_TLBIE_MASK; - /* Set storage description. */ - csa->priv1.mfc_sdr_RW = mfspr(SPRN_SDR1); - /* Enable OS-specific set of interrupts. */ csa->priv1.int_mask_class0_RW = CLASS0_ENABLE_DMA_ALIGNMENT_INTR | CLASS0_ENABLE_INVALID_DMA_COMMAND_INTR | diff --git a/include/asm-powerpc/spu_csa.h b/include/asm-powerpc/spu_csa.h index 964c2d38ccb..bdbf906a767 100644 --- a/include/asm-powerpc/spu_csa.h +++ b/include/asm-powerpc/spu_csa.h @@ -151,7 +151,6 @@ struct spu_priv1_collapsed { u64 mfc_fir_chkstp_enable_RW; u64 smf_sbi_signal_sel; u64 smf_ato_signal_sel; - u64 mfc_sdr_RW; u64 tlb_index_hint_RO; u64 tlb_index_W; u64 tlb_vpn_RW; diff --git a/include/asm-powerpc/spu_priv1.h b/include/asm-powerpc/spu_priv1.h index 300c458b6d0..4f9a04db99f 100644 --- a/include/asm-powerpc/spu_priv1.h +++ b/include/asm-powerpc/spu_priv1.h @@ -37,7 +37,7 @@ struct spu_priv1_ops u64 (*mfc_dar_get) (struct spu *spu); u64 (*mfc_dsisr_get) (struct spu *spu); void (*mfc_dsisr_set) (struct spu *spu, u64 dsisr); - void (*mfc_sdr_set) (struct spu *spu, u64 sdr); + void (*mfc_sdr_setup) (struct spu *spu); void (*mfc_sr1_set) (struct spu *spu, u64 sr1); u64 (*mfc_sr1_get) (struct spu *spu); void (*mfc_tclass_id_set) (struct spu *spu, u64 tclass_id); @@ -112,9 +112,9 @@ spu_mfc_dsisr_set (struct spu *spu, u64 dsisr) } static inline void -spu_mfc_sdr_set (struct spu *spu, u64 sdr) +spu_mfc_sdr_setup (struct spu *spu) { - spu_priv1_ops->mfc_sdr_set(spu, sdr); + spu_priv1_ops->mfc_sdr_setup(spu); } static inline void -- cgit v1.2.3-70-g09d2 From cc21a66d7f727ab97b27af9cf763bc0b51510ffa Mon Sep 17 00:00:00 2001 From: Geoff Levand Date: Tue, 24 Oct 2006 18:31:15 +0200 Subject: [POWERPC] cell: remove unused struct spu variable Remove the mostly unused variable isrc from struct spu and a forgotten function declaration. Signed-off-by: Geoff Levand Signed-off-by: Arnd Bergmann Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/cell/spu_base.c | 21 +++------------------ include/asm-powerpc/spu.h | 1 - 2 files changed, 3 insertions(+), 19 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/platforms/cell/spu_base.c b/arch/powerpc/platforms/cell/spu_base.c index d41ad1d6c04..f6c94087db4 100644 --- a/arch/powerpc/platforms/cell/spu_base.c +++ b/arch/powerpc/platforms/cell/spu_base.c @@ -364,8 +364,7 @@ struct spu *spu_alloc_node(int node) if (!list_empty(&spu_list[node])) { spu = list_entry(spu_list[node].next, struct spu, list); list_del_init(&spu->list); - pr_debug("Got SPU %x %d %d\n", - spu->isrc, spu->number, spu->node); + pr_debug("Got SPU %d %d\n", spu->number, spu->node); spu_init_channels(spu); } mutex_unlock(&spu_mutex); @@ -591,7 +590,6 @@ static int __init spu_map_interrupts_old(struct spu *spu, struct device_node *np /* Add the node number */ isrc |= spu->node << IIC_IRQ_NODE_SHIFT; - spu->isrc = isrc; /* Now map interrupts of all 3 classes */ spu->irqs[0] = irq_create_mapping(NULL, IIC_IRQ_CLASS_0 | isrc); @@ -733,16 +731,6 @@ struct sysdev_class spu_sysdev_class = { set_kset_name("spu") }; -static ssize_t spu_show_isrc(struct sys_device *sysdev, char *buf) -{ - struct spu *spu = container_of(sysdev, struct spu, sysdev); - return sprintf(buf, "%d\n", spu->isrc); - -} -static SYSDEV_ATTR(isrc, 0400, spu_show_isrc, NULL); - -extern int attach_sysdev_to_node(struct sys_device *dev, int nid); - static int spu_create_sysdev(struct spu *spu) { int ret; @@ -756,8 +744,6 @@ static int spu_create_sysdev(struct spu *spu) return ret; } - if (spu->isrc != 0) - sysdev_create_file(&spu->sysdev, &attr_isrc); sysfs_add_device_to_node(&spu->sysdev, spu->nid); return 0; @@ -765,7 +751,6 @@ static int spu_create_sysdev(struct spu *spu) static void spu_destroy_sysdev(struct spu *spu) { - sysdev_remove_file(&spu->sysdev, &attr_isrc); sysfs_remove_device_from_node(&spu->sysdev, spu->nid); sysdev_unregister(&spu->sysdev); } @@ -821,8 +806,8 @@ static int __init create_spu(struct device_node *spe) list_add(&spu->list, &spu_list[spu->node]); mutex_unlock(&spu_mutex); - pr_debug(KERN_DEBUG "Using SPE %s %02x %p %p %p %p %d\n", - spu->name, spu->isrc, spu->local_store, + pr_debug(KERN_DEBUG "Using SPE %s %p %p %p %p %d\n", + spu->name, spu->local_store, spu->problem, spu->priv1, spu->priv2, spu->number); goto out; diff --git a/include/asm-powerpc/spu.h b/include/asm-powerpc/spu.h index e73ea00efd8..cac4ad90a1d 100644 --- a/include/asm-powerpc/spu.h +++ b/include/asm-powerpc/spu.h @@ -118,7 +118,6 @@ struct spu { int number; int nid; unsigned int irqs[3]; - u32 isrc; u32 node; u64 flags; u64 dar; -- cgit v1.2.3-70-g09d2 From 5737edd1ddbde5ab7f63bb3cb36015edbdb7c295 Mon Sep 17 00:00:00 2001 From: Mark Nutter Date: Tue, 24 Oct 2006 18:31:16 +0200 Subject: [POWERPC] spufs: add support for nonschedulable contexts This adds two new flags to spu_create: SPU_CREATE_NONSCHED: create a context that is never moved away from an SPE once it has started running. This flag can only be used by tasks with the CAP_SYS_NICE capability. SPU_CREATE_ISOLATED: create a nonschedulable context that enters isolation mode upon first run. This requires the SPU_CREATE_NONSCHED flag. Signed-off-by: Jeremy Kerr Signed-off-by: Arnd Bergmann Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/cell/spufs/file.c | 22 +++++++++++++ arch/powerpc/platforms/cell/spufs/hw_ops.c | 5 ++- arch/powerpc/platforms/cell/spufs/inode.c | 17 +++++++++- arch/powerpc/platforms/cell/spufs/run.c | 10 ++++-- arch/powerpc/platforms/cell/spufs/spufs.h | 1 + arch/powerpc/platforms/cell/spufs/switch.c | 50 ++++++++++++++++++++++++++++-- include/asm-powerpc/spu.h | 5 ++- 7 files changed, 103 insertions(+), 7 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/platforms/cell/spufs/file.c b/arch/powerpc/platforms/cell/spufs/file.c index 0de8e114e6b..8ca330671ad 100644 --- a/arch/powerpc/platforms/cell/spufs/file.c +++ b/arch/powerpc/platforms/cell/spufs/file.c @@ -1531,3 +1531,25 @@ struct tree_descr spufs_dir_contents[] = { { "object-id", &spufs_object_id_ops, 0666, }, {}, }; + +struct tree_descr spufs_dir_nosched_contents[] = { + { "mem", &spufs_mem_fops, 0666, }, + { "mbox", &spufs_mbox_fops, 0444, }, + { "ibox", &spufs_ibox_fops, 0444, }, + { "wbox", &spufs_wbox_fops, 0222, }, + { "mbox_stat", &spufs_mbox_stat_fops, 0444, }, + { "ibox_stat", &spufs_ibox_stat_fops, 0444, }, + { "wbox_stat", &spufs_wbox_stat_fops, 0444, }, + { "signal1", &spufs_signal1_fops, 0666, }, + { "signal2", &spufs_signal2_fops, 0666, }, + { "signal1_type", &spufs_signal1_type, 0666, }, + { "signal2_type", &spufs_signal2_type, 0666, }, + { "mss", &spufs_mss_fops, 0666, }, + { "mfc", &spufs_mfc_fops, 0666, }, + { "cntl", &spufs_cntl_fops, 0666, }, + { "npc", &spufs_npc_ops, 0666, }, + { "psmap", &spufs_psmap_fops, 0666, }, + { "phys-id", &spufs_id_ops, 0666, }, + { "object-id", &spufs_object_id_ops, 0666, }, + {}, +}; diff --git a/arch/powerpc/platforms/cell/spufs/hw_ops.c b/arch/powerpc/platforms/cell/spufs/hw_ops.c index efc452e71ab..2ad534a04be 100644 --- a/arch/powerpc/platforms/cell/spufs/hw_ops.c +++ b/arch/powerpc/platforms/cell/spufs/hw_ops.c @@ -219,8 +219,11 @@ static char *spu_hw_get_ls(struct spu_context *ctx) static void spu_hw_runcntl_write(struct spu_context *ctx, u32 val) { - eieio(); + spin_lock_irq(&ctx->spu->register_lock); + if (val & SPU_RUNCNTL_ISOLATE) + out_be64(&ctx->spu->priv2->spu_privcntl_RW, 4LL); out_be32(&ctx->spu->problem->spu_runcntl_RW, val); + spin_unlock_irq(&ctx->spu->register_lock); } static void spu_hw_runcntl_stop(struct spu_context *ctx) diff --git a/arch/powerpc/platforms/cell/spufs/inode.c b/arch/powerpc/platforms/cell/spufs/inode.c index 427d00a4f6a..787ae71a685 100644 --- a/arch/powerpc/platforms/cell/spufs/inode.c +++ b/arch/powerpc/platforms/cell/spufs/inode.c @@ -258,7 +258,12 @@ spufs_mkdir(struct inode *dir, struct dentry *dentry, unsigned int flags, inode->i_op = &spufs_dir_inode_operations; inode->i_fop = &simple_dir_operations; - ret = spufs_fill_dir(dentry, spufs_dir_contents, mode, ctx); + if (flags & SPU_CREATE_NOSCHED) + ret = spufs_fill_dir(dentry, spufs_dir_nosched_contents, + mode, ctx); + else + ret = spufs_fill_dir(dentry, spufs_dir_contents, mode, ctx); + if (ret) goto out_free_ctx; @@ -307,6 +312,16 @@ static int spufs_create_context(struct inode *inode, { int ret; + ret = -EPERM; + if ((flags & SPU_CREATE_NOSCHED) && + !capable(CAP_SYS_NICE)) + goto out_unlock; + + ret = -EINVAL; + if ((flags & (SPU_CREATE_NOSCHED | SPU_CREATE_ISOLATE)) + == SPU_CREATE_ISOLATE) + goto out_unlock; + ret = spufs_mkdir(inode, dentry, flags, mode & S_IRWXUGO); if (ret) goto out_unlock; diff --git a/arch/powerpc/platforms/cell/spufs/run.c b/arch/powerpc/platforms/cell/spufs/run.c index 63df8cf4ba1..0c03a04b6a3 100644 --- a/arch/powerpc/platforms/cell/spufs/run.c +++ b/arch/powerpc/platforms/cell/spufs/run.c @@ -51,11 +51,17 @@ static inline int spu_stopped(struct spu_context *ctx, u32 * stat) static inline int spu_run_init(struct spu_context *ctx, u32 * npc) { int ret; + unsigned long runcntl = SPU_RUNCNTL_RUNNABLE; if ((ret = spu_acquire_runnable(ctx)) != 0) return ret; - ctx->ops->npc_write(ctx, *npc); - ctx->ops->runcntl_write(ctx, SPU_RUNCNTL_RUNNABLE); + + if (ctx->flags & SPU_CREATE_ISOLATE) + runcntl |= SPU_RUNCNTL_ISOLATE; + else + ctx->ops->npc_write(ctx, *npc); + + ctx->ops->runcntl_write(ctx, runcntl); return 0; } diff --git a/arch/powerpc/platforms/cell/spufs/spufs.h b/arch/powerpc/platforms/cell/spufs/spufs.h index a0f55ca2d48..b17b809ecd7 100644 --- a/arch/powerpc/platforms/cell/spufs/spufs.h +++ b/arch/powerpc/platforms/cell/spufs/spufs.h @@ -135,6 +135,7 @@ struct spufs_inode_info { container_of(inode, struct spufs_inode_info, vfs_inode) extern struct tree_descr spufs_dir_contents[]; +extern struct tree_descr spufs_dir_nosched_contents[]; /* system call implementation */ long spufs_run_spu(struct file *file, diff --git a/arch/powerpc/platforms/cell/spufs/switch.c b/arch/powerpc/platforms/cell/spufs/switch.c index b85347ff6b2..b47fb50ac2c 100644 --- a/arch/powerpc/platforms/cell/spufs/switch.c +++ b/arch/powerpc/platforms/cell/spufs/switch.c @@ -1916,6 +1916,51 @@ static void save_lscsa(struct spu_state *prev, struct spu *spu) wait_spu_stopped(prev, spu); /* Step 57. */ } +static void force_spu_isolate_exit(struct spu *spu) +{ + struct spu_problem __iomem *prob = spu->problem; + struct spu_priv2 __iomem *priv2 = spu->priv2; + + /* Stop SPE execution and wait for completion. */ + out_be32(&prob->spu_runcntl_RW, SPU_RUNCNTL_STOP); + iobarrier_rw(); + POLL_WHILE_TRUE(in_be32(&prob->spu_status_R) & SPU_STATUS_RUNNING); + + /* Restart SPE master runcntl. */ + spu_mfc_sr1_set(spu, MFC_STATE1_MASTER_RUN_CONTROL_MASK); + iobarrier_w(); + + /* Initiate isolate exit request and wait for completion. */ + out_be64(&priv2->spu_privcntl_RW, 4LL); + iobarrier_w(); + out_be32(&prob->spu_runcntl_RW, 2); + iobarrier_rw(); + POLL_WHILE_FALSE((in_be32(&prob->spu_status_R) + & SPU_STATUS_STOPPED_BY_STOP)); + + /* Reset load request to normal. */ + out_be64(&priv2->spu_privcntl_RW, SPU_PRIVCNT_LOAD_REQUEST_NORMAL); + iobarrier_w(); +} + +/** + * stop_spu_isolate + * Check SPU run-control state and force isolated + * exit function as necessary. + */ +static void stop_spu_isolate(struct spu *spu) +{ + struct spu_problem __iomem *prob = spu->problem; + + if (in_be32(&prob->spu_status_R) & SPU_STATUS_ISOLATED_STATE) { + /* The SPU is in isolated state; the only way + * to get it out is to perform an isolated + * exit (clean) operation. + */ + force_spu_isolate_exit(spu); + } +} + static void harvest(struct spu_state *prev, struct spu *spu) { /* @@ -1928,6 +1973,7 @@ static void harvest(struct spu_state *prev, struct spu *spu) inhibit_user_access(prev, spu); /* Step 3. */ terminate_spu_app(prev, spu); /* Step 4. */ set_switch_pending(prev, spu); /* Step 5. */ + stop_spu_isolate(spu); /* NEW. */ remove_other_spu_access(prev, spu); /* Step 6. */ suspend_mfc(prev, spu); /* Step 7. */ wait_suspend_mfc_complete(prev, spu); /* Step 8. */ @@ -2096,11 +2142,11 @@ int spu_save(struct spu_state *prev, struct spu *spu) acquire_spu_lock(spu); /* Step 1. */ rc = __do_spu_save(prev, spu); /* Steps 2-53. */ release_spu_lock(spu); - if (rc) { + if (rc != 0 && rc != 2 && rc != 6) { panic("%s failed on SPU[%d], rc=%d.\n", __func__, spu->number, rc); } - return rc; + return 0; } EXPORT_SYMBOL_GPL(spu_save); diff --git a/include/asm-powerpc/spu.h b/include/asm-powerpc/spu.h index cac4ad90a1d..a1cf476c66f 100644 --- a/include/asm-powerpc/spu.h +++ b/include/asm-powerpc/spu.h @@ -181,8 +181,10 @@ extern struct spufs_calls { */ #define SPU_CREATE_EVENTS_ENABLED 0x0001 #define SPU_CREATE_GANG 0x0002 +#define SPU_CREATE_NOSCHED 0x0004 +#define SPU_CREATE_ISOLATE 0x0008 -#define SPU_CREATE_FLAG_ALL 0x0003 /* mask of all valid flags */ +#define SPU_CREATE_FLAG_ALL 0x000f /* mask of all valid flags */ #ifdef CONFIG_SPU_FS_MODULE @@ -276,6 +278,7 @@ struct spu_problem { u32 spu_runcntl_RW; /* 0x401c */ #define SPU_RUNCNTL_STOP 0L #define SPU_RUNCNTL_RUNNABLE 1L +#define SPU_RUNCNTL_ISOLATE 2L u8 pad_0x4020_0x4024[0x4]; /* 0x4020 */ u32 spu_status_R; /* 0x4024 */ #define SPU_STOP_STATUS_SHIFT 16 -- cgit v1.2.3-70-g09d2 From eb758ce5b0d84e13cb643b6cc7cb429f6fa28258 Mon Sep 17 00:00:00 2001 From: "arnd@arndb.de" Date: Tue, 24 Oct 2006 18:31:17 +0200 Subject: [POWERPC] spufs: "stautus" isnt a word. Signed-off-by: Jeremy Kerr Signed-off-by: Arnd Bergmann Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/cell/spufs/switch.c | 10 +++++----- include/asm-powerpc/spu.h | 4 ++-- 2 files changed, 7 insertions(+), 7 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/platforms/cell/spufs/switch.c b/arch/powerpc/platforms/cell/spufs/switch.c index b47fb50ac2c..c08981ff7fc 100644 --- a/arch/powerpc/platforms/cell/spufs/switch.c +++ b/arch/powerpc/platforms/cell/spufs/switch.c @@ -102,7 +102,7 @@ static inline int check_spu_isolate(struct spu_state *csa, struct spu *spu) * saved at this time. */ isolate_state = SPU_STATUS_ISOLATED_STATE | - SPU_STATUS_ISOLATED_LOAD_STAUTUS | SPU_STATUS_ISOLATED_EXIT_STAUTUS; + SPU_STATUS_ISOLATED_LOAD_STATUS | SPU_STATUS_ISOLATED_EXIT_STATUS; return (in_be32(&prob->spu_status_R) & isolate_state) ? 1 : 0; } @@ -1046,12 +1046,12 @@ static inline int suspend_spe(struct spu_state *csa, struct spu *spu) */ if (in_be32(&prob->spu_status_R) & SPU_STATUS_RUNNING) { if (in_be32(&prob->spu_status_R) & - SPU_STATUS_ISOLATED_EXIT_STAUTUS) { + SPU_STATUS_ISOLATED_EXIT_STATUS) { POLL_WHILE_TRUE(in_be32(&prob->spu_status_R) & SPU_STATUS_RUNNING); } if ((in_be32(&prob->spu_status_R) & - SPU_STATUS_ISOLATED_LOAD_STAUTUS) + SPU_STATUS_ISOLATED_LOAD_STATUS) || (in_be32(&prob->spu_status_R) & SPU_STATUS_ISOLATED_STATE)) { out_be32(&prob->spu_runcntl_RW, SPU_RUNCNTL_STOP); @@ -1085,7 +1085,7 @@ static inline void clear_spu_status(struct spu_state *csa, struct spu *spu) */ if (!(in_be32(&prob->spu_status_R) & SPU_STATUS_RUNNING)) { if (in_be32(&prob->spu_status_R) & - SPU_STATUS_ISOLATED_EXIT_STAUTUS) { + SPU_STATUS_ISOLATED_EXIT_STATUS) { spu_mfc_sr1_set(spu, MFC_STATE1_MASTER_RUN_CONTROL_MASK); eieio(); @@ -1095,7 +1095,7 @@ static inline void clear_spu_status(struct spu_state *csa, struct spu *spu) SPU_STATUS_RUNNING); } if ((in_be32(&prob->spu_status_R) & - SPU_STATUS_ISOLATED_LOAD_STAUTUS) + SPU_STATUS_ISOLATED_LOAD_STATUS) || (in_be32(&prob->spu_status_R) & SPU_STATUS_ISOLATED_STATE)) { spu_mfc_sr1_set(spu, diff --git a/include/asm-powerpc/spu.h b/include/asm-powerpc/spu.h index a1cf476c66f..704e8a8d2eb 100644 --- a/include/asm-powerpc/spu.h +++ b/include/asm-powerpc/spu.h @@ -291,8 +291,8 @@ struct spu_problem { #define SPU_STATUS_INVALID_INSTR 0x20 #define SPU_STATUS_INVALID_CH 0x40 #define SPU_STATUS_ISOLATED_STATE 0x80 -#define SPU_STATUS_ISOLATED_LOAD_STAUTUS 0x200 -#define SPU_STATUS_ISOLATED_EXIT_STAUTUS 0x400 +#define SPU_STATUS_ISOLATED_LOAD_STATUS 0x200 +#define SPU_STATUS_ISOLATED_EXIT_STATUS 0x400 u8 pad_0x4028_0x402c[0x4]; /* 0x4028 */ u32 spu_spe_R; /* 0x402c */ u8 pad_0x4030_0x4034[0x4]; /* 0x4030 */ -- cgit v1.2.3-70-g09d2 From 0afacde3df4c9980f505d9afd7cb0058389732ca Mon Sep 17 00:00:00 2001 From: "arnd@arndb.de" Date: Tue, 24 Oct 2006 18:31:18 +0200 Subject: [POWERPC] spufs: allow isolated mode apps by starting the SPE loader This patch adds general support for isolated mode SPE apps. Isolated apps are started indirectly, by a dedicated loader "kernel". This patch starts the loader when spe_create is invoked with the ISOLATE flag. We do this at spe_create time to allow libspe to pass the isolated app in before calling spe_run. The loader is read from the device tree, at the location "/spu-isolation/loader". If the loader is not present, an attempt to start an isolated SPE binary will fail with -ENODEV. Update: loader needs to be correctly aligned - copy to a kmalloced buf. Update: remove workaround for systemsim/spurom 'L-bit' bug, which has been fixed. Update: don't write to runcntl on spu_run_init: SPU is already running. Update: do spu_setup_isolated earlier Tested on systemsim. Signed-off-by: Jeremy Kerr Signed-off-by: Arnd Bergmann Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/cell/spu_base.c | 35 ++++++--- arch/powerpc/platforms/cell/spufs/inode.c | 117 ++++++++++++++++++++++++++++++ arch/powerpc/platforms/cell/spufs/run.c | 12 +-- 3 files changed, 148 insertions(+), 16 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/platforms/cell/spu_base.c b/arch/powerpc/platforms/cell/spu_base.c index f6c94087db4..d78b0af038e 100644 --- a/arch/powerpc/platforms/cell/spu_base.c +++ b/arch/powerpc/platforms/cell/spu_base.c @@ -89,7 +89,30 @@ static int __spu_trap_data_seg(struct spu *spu, unsigned long ea) printk("%s: invalid access during switch!\n", __func__); return 1; } - if (!mm || (REGION_ID(ea) != USER_REGION_ID)) { + esid = (ea & ESID_MASK) | SLB_ESID_V; + + switch(REGION_ID(ea)) { + case USER_REGION_ID: +#ifdef CONFIG_HUGETLB_PAGE + if (in_hugepage_area(mm->context, ea)) + llp = mmu_psize_defs[mmu_huge_psize].sllp; + else +#endif + llp = mmu_psize_defs[mmu_virtual_psize].sllp; + vsid = (get_vsid(mm->context.id, ea) << SLB_VSID_SHIFT) | + SLB_VSID_USER | llp; + break; + case VMALLOC_REGION_ID: + llp = mmu_psize_defs[mmu_virtual_psize].sllp; + vsid = (get_kernel_vsid(ea) << SLB_VSID_SHIFT) | + SLB_VSID_KERNEL | llp; + break; + case KERNEL_REGION_ID: + llp = mmu_psize_defs[mmu_linear_psize].sllp; + vsid = (get_kernel_vsid(ea) << SLB_VSID_SHIFT) | + SLB_VSID_KERNEL | llp; + break; + default: /* Future: support kernel segments so that drivers * can use SPUs. */ @@ -97,16 +120,6 @@ static int __spu_trap_data_seg(struct spu *spu, unsigned long ea) return 1; } - esid = (ea & ESID_MASK) | SLB_ESID_V; -#ifdef CONFIG_HUGETLB_PAGE - if (in_hugepage_area(mm->context, ea)) - llp = mmu_psize_defs[mmu_huge_psize].sllp; - else -#endif - llp = mmu_psize_defs[mmu_virtual_psize].sllp; - vsid = (get_vsid(mm->context.id, ea) << SLB_VSID_SHIFT) | - SLB_VSID_USER | llp; - out_be64(&priv2->slb_index_W, spu->slb_replace); out_be64(&priv2->slb_vsid_RW, vsid); out_be64(&priv2->slb_esid_RW, esid); diff --git a/arch/powerpc/platforms/cell/spufs/inode.c b/arch/powerpc/platforms/cell/spufs/inode.c index 787ae71a685..c8751936672 100644 --- a/arch/powerpc/platforms/cell/spufs/inode.c +++ b/arch/powerpc/platforms/cell/spufs/inode.c @@ -33,6 +33,8 @@ #include #include +#include +#include #include #include #include @@ -41,6 +43,7 @@ #include "spufs.h" static kmem_cache_t *spufs_inode_cache; +static char *isolated_loader; static struct inode * spufs_alloc_inode(struct super_block *sb) @@ -232,6 +235,89 @@ struct file_operations spufs_context_fops = { .fsync = simple_sync_file, }; +static int spu_setup_isolated(struct spu_context *ctx) +{ + int ret; + u64 __iomem *mfc_cntl; + u64 sr1; + u32 status; + unsigned long timeout; + const u32 status_loading = SPU_STATUS_RUNNING + | SPU_STATUS_ISOLATED_STATE | SPU_STATUS_ISOLATED_LOAD_STATUS; + + if (!isolated_loader) + return -ENODEV; + + if ((ret = spu_acquire_runnable(ctx)) != 0) + return ret; + + mfc_cntl = &ctx->spu->priv2->mfc_control_RW; + + /* purge the MFC DMA queue to ensure no spurious accesses before we + * enter kernel mode */ + timeout = jiffies + HZ; + out_be64(mfc_cntl, MFC_CNTL_PURGE_DMA_REQUEST); + while ((in_be64(mfc_cntl) & MFC_CNTL_PURGE_DMA_STATUS_MASK) + != MFC_CNTL_PURGE_DMA_COMPLETE) { + if (time_after(jiffies, timeout)) { + printk(KERN_ERR "%s: timeout flushing MFC DMA queue\n", + __FUNCTION__); + ret = -EIO; + goto out_unlock; + } + cond_resched(); + } + + /* put the SPE in kernel mode to allow access to the loader */ + sr1 = spu_mfc_sr1_get(ctx->spu); + sr1 &= ~MFC_STATE1_PROBLEM_STATE_MASK; + spu_mfc_sr1_set(ctx->spu, sr1); + + /* start the loader */ + ctx->ops->signal1_write(ctx, (unsigned long)isolated_loader >> 32); + ctx->ops->signal2_write(ctx, + (unsigned long)isolated_loader & 0xffffffff); + + ctx->ops->runcntl_write(ctx, + SPU_RUNCNTL_RUNNABLE | SPU_RUNCNTL_ISOLATE); + + ret = 0; + timeout = jiffies + HZ; + while (((status = ctx->ops->status_read(ctx)) & status_loading) == + status_loading) { + if (time_after(jiffies, timeout)) { + printk(KERN_ERR "%s: timeout waiting for loader\n", + __FUNCTION__); + ret = -EIO; + goto out_drop_priv; + } + cond_resched(); + } + + if (!(status & SPU_STATUS_RUNNING)) { + /* If isolated LOAD has failed: run SPU, we will get a stop-and + * signal later. */ + pr_debug("%s: isolated LOAD failed\n", __FUNCTION__); + ctx->ops->runcntl_write(ctx, SPU_RUNCNTL_RUNNABLE); + ret = -EACCES; + + } else if (!(status & SPU_STATUS_ISOLATED_STATE)) { + /* This isn't allowed by the CBEA, but check anyway */ + pr_debug("%s: SPU fell out of isolated mode?\n", __FUNCTION__); + ctx->ops->runcntl_write(ctx, SPU_RUNCNTL_STOP); + ret = -EINVAL; + } + +out_drop_priv: + /* Finished accessing the loader. Drop kernel mode */ + sr1 |= MFC_STATE1_PROBLEM_STATE_MASK; + spu_mfc_sr1_set(ctx->spu, sr1); + +out_unlock: + up_write(&ctx->state_sema); + return ret; +} + static int spufs_mkdir(struct inode *dir, struct dentry *dentry, unsigned int flags, int mode) @@ -255,6 +341,11 @@ spufs_mkdir(struct inode *dir, struct dentry *dentry, unsigned int flags, goto out_iput; ctx->flags = flags; + if (flags & SPU_CREATE_ISOLATE) { + ret = spu_setup_isolated(ctx); + if (ret) + goto out_iput; + } inode->i_op = &spufs_dir_inode_operations; inode->i_fop = &simple_dir_operations; @@ -555,6 +646,30 @@ spufs_parse_options(char *options, struct inode *root) return 1; } +static void +spufs_init_isolated_loader(void) +{ + struct device_node *dn; + const char *loader; + int size; + + dn = of_find_node_by_path("/spu-isolation"); + if (!dn) + return; + + loader = get_property(dn, "loader", &size); + if (!loader) + return; + + /* kmalloc should align on a 16 byte boundary..* */ + isolated_loader = kmalloc(size, GFP_KERNEL); + if (!isolated_loader) + return; + + memcpy(isolated_loader, loader, size); + printk(KERN_INFO "spufs: SPU isolation mode enabled\n"); +} + static int spufs_create_root(struct super_block *sb, void *data) { @@ -640,6 +755,8 @@ static int __init spufs_init(void) ret = register_spu_syscalls(&spufs_calls); if (ret) goto out_fs; + + spufs_init_isolated_loader(); return 0; out_fs: unregister_filesystem(&spufs_type); diff --git a/arch/powerpc/platforms/cell/spufs/run.c b/arch/powerpc/platforms/cell/spufs/run.c index 0c03a04b6a3..a4a0080c223 100644 --- a/arch/powerpc/platforms/cell/spufs/run.c +++ b/arch/powerpc/platforms/cell/spufs/run.c @@ -1,3 +1,5 @@ +#define DEBUG + #include #include @@ -56,12 +58,12 @@ static inline int spu_run_init(struct spu_context *ctx, u32 * npc) if ((ret = spu_acquire_runnable(ctx)) != 0) return ret; - if (ctx->flags & SPU_CREATE_ISOLATE) - runcntl |= SPU_RUNCNTL_ISOLATE; - else + /* if we're in isolated mode, we would have started the SPU + * earlier, so don't do it again now. */ + if (!(ctx->flags & SPU_CREATE_ISOLATE)) { ctx->ops->npc_write(ctx, *npc); - - ctx->ops->runcntl_write(ctx, runcntl); + ctx->ops->runcntl_write(ctx, runcntl); + } return 0; } -- cgit v1.2.3-70-g09d2 From 099814bb1f9bd9081d7c85867f8eb8c049abc1b9 Mon Sep 17 00:00:00 2001 From: Jeremy Kerr Date: Tue, 24 Oct 2006 18:31:19 +0200 Subject: [POWERPC] spufs: Add isolated-mode SPE recycling support When in isolated mode, SPEs have access to an area of persistent storage, which is per-SPE. In order for isolated-mode apps to communicate arbitrary data through this storage, we need to ensure that isolated physical SPEs can be reused for subsequent applications. Add a file ("recycle") in a spethread dir to enable isolated-mode recycling. By writing to this file, the kernel will reload the isolated-mode loader kernel, allowing a new app to be run on the same physical SPE. This requires the spu_acquire_exclusive function to enforce exclusive access to the SPE while the loader is initialised. Signed-off-by: Jeremy Kerr Signed-off-by: Arnd Bergmann Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/cell/spufs/context.c | 27 ++++++++++++++++++++++++ arch/powerpc/platforms/cell/spufs/file.c | 32 +++++++++++++++++++++++++++++ arch/powerpc/platforms/cell/spufs/inode.c | 23 +++++++++++++-------- arch/powerpc/platforms/cell/spufs/spufs.h | 7 +++++++ 4 files changed, 81 insertions(+), 8 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/platforms/cell/spufs/context.c b/arch/powerpc/platforms/cell/spufs/context.c index 034cf6af53a..48eb050bcf4 100644 --- a/arch/powerpc/platforms/cell/spufs/context.c +++ b/arch/powerpc/platforms/cell/spufs/context.c @@ -120,6 +120,33 @@ void spu_unmap_mappings(struct spu_context *ctx) unmap_mapping_range(ctx->signal2, 0, 0x4000, 1); } +int spu_acquire_exclusive(struct spu_context *ctx) +{ + int ret = 0; + + down_write(&ctx->state_sema); + /* ctx is about to be freed, can't acquire any more */ + if (!ctx->owner) { + ret = -EINVAL; + goto out; + } + + if (ctx->state == SPU_STATE_SAVED) { + ret = spu_activate(ctx, 0); + if (ret) + goto out; + ctx->state = SPU_STATE_RUNNABLE; + } else { + /* We need to exclude userspace access to the context. */ + spu_unmap_mappings(ctx); + } + +out: + if (ret) + up_write(&ctx->state_sema); + return ret; +} + int spu_acquire_runnable(struct spu_context *ctx) { int ret = 0; diff --git a/arch/powerpc/platforms/cell/spufs/file.c b/arch/powerpc/platforms/cell/spufs/file.c index 8ca330671ad..5b8ba6c3aa3 100644 --- a/arch/powerpc/platforms/cell/spufs/file.c +++ b/arch/powerpc/platforms/cell/spufs/file.c @@ -1343,6 +1343,37 @@ static struct file_operations spufs_mfc_fops = { .mmap = spufs_mfc_mmap, }; + +static int spufs_recycle_open(struct inode *inode, struct file *file) +{ + file->private_data = SPUFS_I(inode)->i_ctx; + return nonseekable_open(inode, file); +} + +static ssize_t spufs_recycle_write(struct file *file, + const char __user *buffer, size_t size, loff_t *pos) +{ + struct spu_context *ctx = file->private_data; + int ret; + + if (!(ctx->flags & SPU_CREATE_ISOLATE)) + return -EINVAL; + + if (size < 1) + return -EINVAL; + + ret = spu_recycle_isolated(ctx); + + if (ret) + return ret; + return size; +} + +static struct file_operations spufs_recycle_fops = { + .open = spufs_recycle_open, + .write = spufs_recycle_write, +}; + static void spufs_npc_set(void *data, u64 val) { struct spu_context *ctx = data; @@ -1551,5 +1582,6 @@ struct tree_descr spufs_dir_nosched_contents[] = { { "psmap", &spufs_psmap_fops, 0666, }, { "phys-id", &spufs_id_ops, 0666, }, { "object-id", &spufs_object_id_ops, 0666, }, + { "recycle", &spufs_recycle_fops, 0222, }, {}, }; diff --git a/arch/powerpc/platforms/cell/spufs/inode.c b/arch/powerpc/platforms/cell/spufs/inode.c index c8751936672..9e457be140e 100644 --- a/arch/powerpc/platforms/cell/spufs/inode.c +++ b/arch/powerpc/platforms/cell/spufs/inode.c @@ -248,7 +248,7 @@ static int spu_setup_isolated(struct spu_context *ctx) if (!isolated_loader) return -ENODEV; - if ((ret = spu_acquire_runnable(ctx)) != 0) + if ((ret = spu_acquire_exclusive(ctx)) != 0) return ret; mfc_cntl = &ctx->spu->priv2->mfc_control_RW; @@ -314,10 +314,16 @@ out_drop_priv: spu_mfc_sr1_set(ctx->spu, sr1); out_unlock: - up_write(&ctx->state_sema); + spu_release_exclusive(ctx); return ret; } +int spu_recycle_isolated(struct spu_context *ctx) +{ + ctx->ops->runcntl_stop(ctx); + return spu_setup_isolated(ctx); +} + static int spufs_mkdir(struct inode *dir, struct dentry *dentry, unsigned int flags, int mode) @@ -341,12 +347,6 @@ spufs_mkdir(struct inode *dir, struct dentry *dentry, unsigned int flags, goto out_iput; ctx->flags = flags; - if (flags & SPU_CREATE_ISOLATE) { - ret = spu_setup_isolated(ctx); - if (ret) - goto out_iput; - } - inode->i_op = &spufs_dir_inode_operations; inode->i_fop = &simple_dir_operations; if (flags & SPU_CREATE_NOSCHED) @@ -432,6 +432,13 @@ static int spufs_create_context(struct inode *inode, out_unlock: mutex_unlock(&inode->i_mutex); out: + if (ret >= 0 && (flags & SPU_CREATE_ISOLATE)) { + int setup_err = spu_setup_isolated( + SPUFS_I(dentry->d_inode)->i_ctx); + if (setup_err) + ret = setup_err; + } + dput(dentry); return ret; } diff --git a/arch/powerpc/platforms/cell/spufs/spufs.h b/arch/powerpc/platforms/cell/spufs/spufs.h index b17b809ecd7..f438f0b8525 100644 --- a/arch/powerpc/platforms/cell/spufs/spufs.h +++ b/arch/powerpc/platforms/cell/spufs/spufs.h @@ -163,6 +163,12 @@ void spu_acquire(struct spu_context *ctx); void spu_release(struct spu_context *ctx); int spu_acquire_runnable(struct spu_context *ctx); void spu_acquire_saved(struct spu_context *ctx); +int spu_acquire_exclusive(struct spu_context *ctx); + +static inline void spu_release_exclusive(struct spu_context *ctx) +{ + up_write(&ctx->state_sema); +} int spu_activate(struct spu_context *ctx, u64 flags); void spu_deactivate(struct spu_context *ctx); @@ -170,6 +176,7 @@ void spu_yield(struct spu_context *ctx); int __init spu_sched_init(void); void __exit spu_sched_exit(void); +int spu_recycle_isolated(struct spu_context *ctx); /* * spufs_wait * Same as wait_event_interruptible(), except that here -- cgit v1.2.3-70-g09d2 From 22b8c9f5baeb440a716ea760ff05290221565b4c Mon Sep 17 00:00:00 2001 From: David Erb Date: Tue, 24 Oct 2006 18:31:20 +0200 Subject: [POWERPC] cell: update Cell BE register definitions There are a few definitions that are required by subsequent patches, so add them here. The original patch is from David Erb, but is significantly cleaned up by Kevon Corry. Cc: Kevin Corry Signed-off-by: Arnd Bergmann Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/cell/cbe_regs.c | 44 ++++++++- arch/powerpc/platforms/cell/cbe_regs.h | 161 +++++++++++++++++++++++++------- arch/powerpc/platforms/cell/pervasive.c | 6 +- 3 files changed, 170 insertions(+), 41 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/platforms/cell/cbe_regs.c b/arch/powerpc/platforms/cell/cbe_regs.c index 2f194ba2989..5e3e0e925e4 100644 --- a/arch/powerpc/platforms/cell/cbe_regs.c +++ b/arch/powerpc/platforms/cell/cbe_regs.c @@ -8,6 +8,7 @@ #include #include +#include #include #include @@ -16,8 +17,6 @@ #include "cbe_regs.h" -#define MAX_CBE 2 - /* * Current implementation uses "cpu" nodes. We build our own mapping * array of cpu numbers to cpu nodes locally for now to allow interrupt @@ -30,6 +29,7 @@ static struct cbe_regs_map struct device_node *cpu_node; struct cbe_pmd_regs __iomem *pmd_regs; struct cbe_iic_regs __iomem *iic_regs; + struct cbe_mic_tm_regs __iomem *mic_tm_regs; } cbe_regs_maps[MAX_CBE]; static int cbe_regs_map_count; @@ -42,6 +42,19 @@ static struct cbe_thread_map static struct cbe_regs_map *cbe_find_map(struct device_node *np) { int i; + struct device_node *tmp_np; + + if (strcasecmp(np->type, "spe") == 0) { + if (np->data == NULL) { + /* walk up path until cpu node was found */ + tmp_np = np->parent; + while (tmp_np != NULL && strcasecmp(tmp_np->type, "cpu") != 0) + tmp_np = tmp_np->parent; + + np->data = cbe_find_map(tmp_np); + } + return np->data; + } for (i = 0; i < cbe_regs_map_count; i++) if (cbe_regs_maps[i].cpu_node == np) @@ -56,6 +69,7 @@ struct cbe_pmd_regs __iomem *cbe_get_pmd_regs(struct device_node *np) return NULL; return map->pmd_regs; } +EXPORT_SYMBOL_GPL(cbe_get_pmd_regs); struct cbe_pmd_regs __iomem *cbe_get_cpu_pmd_regs(int cpu) { @@ -64,7 +78,7 @@ struct cbe_pmd_regs __iomem *cbe_get_cpu_pmd_regs(int cpu) return NULL; return map->pmd_regs; } - +EXPORT_SYMBOL_GPL(cbe_get_cpu_pmd_regs); struct cbe_iic_regs __iomem *cbe_get_iic_regs(struct device_node *np) { @@ -73,6 +87,7 @@ struct cbe_iic_regs __iomem *cbe_get_iic_regs(struct device_node *np) return NULL; return map->iic_regs; } + struct cbe_iic_regs __iomem *cbe_get_cpu_iic_regs(int cpu) { struct cbe_regs_map *map = cbe_thread_map[cpu].regs; @@ -81,6 +96,24 @@ struct cbe_iic_regs __iomem *cbe_get_cpu_iic_regs(int cpu) return map->iic_regs; } +struct cbe_mic_tm_regs __iomem *cbe_get_mic_tm_regs(struct device_node *np) +{ + struct cbe_regs_map *map = cbe_find_map(np); + if (map == NULL) + return NULL; + return map->mic_tm_regs; +} + +struct cbe_mic_tm_regs __iomem *cbe_get_cpu_mic_tm_regs(int cpu) +{ + struct cbe_regs_map *map = cbe_thread_map[cpu].regs; + if (map == NULL) + return NULL; + return map->mic_tm_regs; +} +EXPORT_SYMBOL_GPL(cbe_get_cpu_mic_tm_regs); + + void __init cbe_regs_init(void) { int i; @@ -119,6 +152,11 @@ void __init cbe_regs_init(void) prop = get_property(cpu, "iic", NULL); if (prop != NULL) map->iic_regs = ioremap(prop->address, prop->len); + + prop = (struct address_prop *)get_property(cpu, "mic-tm", + NULL); + if (prop != NULL) + map->mic_tm_regs = ioremap(prop->address, prop->len); } } diff --git a/arch/powerpc/platforms/cell/cbe_regs.h b/arch/powerpc/platforms/cell/cbe_regs.h index e76e4a6af5b..02bdbc1cd6e 100644 --- a/arch/powerpc/platforms/cell/cbe_regs.h +++ b/arch/powerpc/platforms/cell/cbe_regs.h @@ -4,6 +4,11 @@ * This file is intended to hold the various register definitions for CBE * on-chip system devices (memory controller, IO controller, etc...) * + * (C) Copyright IBM Corporation 2001,2006 + * + * Authors: Maximino Aguilar (maguilar@us.ibm.com) + * David J. Erb (djerb@us.ibm.com) + * * (c) 2006 Benjamin Herrenschmidt , IBM Corp. */ @@ -22,6 +27,7 @@ #define HID0_CBE_THERM_INT_EN 0x0000000400000000ul #define HID0_CBE_SYSERR_INT_EN 0x0000000200000000ul +#define MAX_CBE 2 /* * @@ -29,45 +35,86 @@ * */ +union spe_reg { + u64 val; + u8 spe[8]; +}; + +union ppe_spe_reg { + u64 val; + struct { + u32 ppe; + u32 spe; + }; +}; + + struct cbe_pmd_regs { - u8 pad_0x0000_0x0800[0x0800 - 0x0000]; /* 0x0000 */ + /* Debug Bus Control */ + u64 pad_0x0000; /* 0x0000 */ + + u64 group_control; /* 0x0008 */ + + u8 pad_0x0010_0x00a8 [0x00a8 - 0x0010]; /* 0x0010 */ + + u64 debug_bus_control; /* 0x00a8 */ + + u8 pad_0x00b0_0x0100 [0x0100 - 0x00b0]; /* 0x00b0 */ + + u64 trace_aux_data; /* 0x0100 */ + u64 trace_buffer_0_63; /* 0x0108 */ + u64 trace_buffer_64_127; /* 0x0110 */ + u64 trace_address; /* 0x0118 */ + u64 ext_tr_timer; /* 0x0120 */ + + u8 pad_0x0128_0x0400 [0x0400 - 0x0128]; /* 0x0128 */ + + /* Performance Monitor */ + u64 pm_status; /* 0x0400 */ + u64 pm_control; /* 0x0408 */ + u64 pm_interval; /* 0x0410 */ + u64 pm_ctr[4]; /* 0x0418 */ + u64 pm_start_stop; /* 0x0438 */ + u64 pm07_control[8]; /* 0x0440 */ + + u8 pad_0x0480_0x0800 [0x0800 - 0x0480]; /* 0x0480 */ /* Thermal Sensor Registers */ - u64 ts_ctsr1; /* 0x0800 */ - u64 ts_ctsr2; /* 0x0808 */ - u64 ts_mtsr1; /* 0x0810 */ - u64 ts_mtsr2; /* 0x0818 */ - u64 ts_itr1; /* 0x0820 */ - u64 ts_itr2; /* 0x0828 */ - u64 ts_gitr; /* 0x0830 */ - u64 ts_isr; /* 0x0838 */ - u64 ts_imr; /* 0x0840 */ - u64 tm_cr1; /* 0x0848 */ - u64 tm_cr2; /* 0x0850 */ - u64 tm_simr; /* 0x0858 */ - u64 tm_tpr; /* 0x0860 */ - u64 tm_str1; /* 0x0868 */ - u64 tm_str2; /* 0x0870 */ - u64 tm_tsr; /* 0x0878 */ + union spe_reg ts_ctsr1; /* 0x0800 */ + u64 ts_ctsr2; /* 0x0808 */ + union spe_reg ts_mtsr1; /* 0x0810 */ + u64 ts_mtsr2; /* 0x0818 */ + union spe_reg ts_itr1; /* 0x0820 */ + u64 ts_itr2; /* 0x0828 */ + u64 ts_gitr; /* 0x0830 */ + u64 ts_isr; /* 0x0838 */ + u64 ts_imr; /* 0x0840 */ + union spe_reg tm_cr1; /* 0x0848 */ + u64 tm_cr2; /* 0x0850 */ + u64 tm_simr; /* 0x0858 */ + union ppe_spe_reg tm_tpr; /* 0x0860 */ + union spe_reg tm_str1; /* 0x0868 */ + u64 tm_str2; /* 0x0870 */ + union ppe_spe_reg tm_tsr; /* 0x0878 */ /* Power Management */ - u64 pm_control; /* 0x0880 */ -#define CBE_PMD_PAUSE_ZERO_CONTROL 0x10000 - u64 pm_status; /* 0x0888 */ + u64 pmcr; /* 0x0880 */ +#define CBE_PMD_PAUSE_ZERO_CONTROL 0x10000 + u64 pmsr; /* 0x0888 */ /* Time Base Register */ - u64 tbr; /* 0x0890 */ + u64 tbr; /* 0x0890 */ - u8 pad_0x0898_0x0c00 [0x0c00 - 0x0898]; /* 0x0898 */ + u8 pad_0x0898_0x0c00 [0x0c00 - 0x0898]; /* 0x0898 */ /* Fault Isolation Registers */ - u64 checkstop_fir; /* 0x0c00 */ - u64 recoverable_fir; - u64 spec_att_mchk_fir; - u64 fir_mode_reg; - u64 fir_enable_mask; + u64 checkstop_fir; /* 0x0c00 */ + u64 recoverable_fir; /* 0x0c08 */ + u64 spec_att_mchk_fir; /* 0x0c10 */ + u64 fir_mode_reg; /* 0x0c18 */ + u64 fir_enable_mask; /* 0x0c20 */ - u8 pad_0x0c28_0x1000 [0x1000 - 0x0c28]; /* 0x0c28 */ + u8 pad_0x0c28_0x1000 [0x1000 - 0x0c28]; /* 0x0c28 */ }; extern struct cbe_pmd_regs __iomem *cbe_get_pmd_regs(struct device_node *np); @@ -102,18 +149,20 @@ struct cbe_iic_regs { /* IIC interrupt registers */ struct cbe_iic_thread_regs thread[2]; /* 0x0400 */ - u64 iic_ir; /* 0x0440 */ - u64 iic_is; /* 0x0448 */ + + u64 iic_ir; /* 0x0440 */ + u64 iic_is; /* 0x0448 */ +#define CBE_IIC_IS_PMI 0x2 u8 pad_0x0450_0x0500[0x0500 - 0x0450]; /* 0x0450 */ /* IOC FIR */ u64 ioc_fir_reset; /* 0x0500 */ - u64 ioc_fir_set; - u64 ioc_checkstop_enable; - u64 ioc_fir_error_mask; - u64 ioc_syserr_enable; - u64 ioc_fir; + u64 ioc_fir_set; /* 0x0508 */ + u64 ioc_checkstop_enable; /* 0x0510 */ + u64 ioc_fir_error_mask; /* 0x0518 */ + u64 ioc_syserr_enable; /* 0x0520 */ + u64 ioc_fir; /* 0x0528 */ u8 pad_0x0530_0x1000[0x1000 - 0x0530]; /* 0x0530 */ }; @@ -122,6 +171,48 @@ extern struct cbe_iic_regs __iomem *cbe_get_iic_regs(struct device_node *np); extern struct cbe_iic_regs __iomem *cbe_get_cpu_iic_regs(int cpu); +struct cbe_mic_tm_regs { + u8 pad_0x0000_0x0040[0x0040 - 0x0000]; /* 0x0000 */ + + u64 mic_ctl_cnfg2; /* 0x0040 */ +#define CBE_MIC_ENABLE_AUX_TRC 0x8000000000000000LL +#define CBE_MIC_DISABLE_PWR_SAV_2 0x0200000000000000LL +#define CBE_MIC_DISABLE_AUX_TRC_WRAP 0x0100000000000000LL +#define CBE_MIC_ENABLE_AUX_TRC_INT 0x0080000000000000LL + + u64 pad_0x0048; /* 0x0048 */ + + u64 mic_aux_trc_base; /* 0x0050 */ + u64 mic_aux_trc_max_addr; /* 0x0058 */ + u64 mic_aux_trc_cur_addr; /* 0x0060 */ + u64 mic_aux_trc_grf_addr; /* 0x0068 */ + u64 mic_aux_trc_grf_data; /* 0x0070 */ + + u64 pad_0x0078; /* 0x0078 */ + + u64 mic_ctl_cnfg_0; /* 0x0080 */ +#define CBE_MIC_DISABLE_PWR_SAV_0 0x8000000000000000LL + + u64 pad_0x0088; /* 0x0088 */ + + u64 slow_fast_timer_0; /* 0x0090 */ + u64 slow_next_timer_0; /* 0x0098 */ + + u8 pad_0x00a0_0x01c0[0x01c0 - 0x0a0]; /* 0x00a0 */ + + u64 mic_ctl_cnfg_1; /* 0x01c0 */ +#define CBE_MIC_DISABLE_PWR_SAV_1 0x8000000000000000LL + u64 pad_0x01c8; /* 0x01c8 */ + + u64 slow_fast_timer_1; /* 0x01d0 */ + u64 slow_next_timer_1; /* 0x01d8 */ + + u8 pad_0x01e0_0x1000[0x1000 - 0x01e0]; /* 0x01e0 */ +}; + +extern struct cbe_mic_tm_regs __iomem *cbe_get_mic_tm_regs(struct device_node *np); +extern struct cbe_mic_tm_regs __iomem *cbe_get_cpu_mic_tm_regs(int cpu); + /* Init this module early */ extern void cbe_regs_init(void); diff --git a/arch/powerpc/platforms/cell/pervasive.c b/arch/powerpc/platforms/cell/pervasive.c index 9f2e4ed20a5..fdcd89e99f1 100644 --- a/arch/powerpc/platforms/cell/pervasive.c +++ b/arch/powerpc/platforms/cell/pervasive.c @@ -54,9 +54,9 @@ static void __init cbe_enable_pause_zero(void) pr_debug("Power Management: CPU %d\n", smp_processor_id()); /* Enable Pause(0) control bit */ - temp_register = in_be64(&pregs->pm_control); + temp_register = in_be64(&pregs->pmcr); - out_be64(&pregs->pm_control, + out_be64(&pregs->pmcr, temp_register | CBE_PMD_PAUSE_ZERO_CONTROL); /* Enable DEC and EE interrupt request */ @@ -87,7 +87,7 @@ static void cbe_idle(void) unsigned long ctrl; /* Why do we do that on every idle ? Couldn't that be done once for - * all or do we lose the state some way ? Also, the pm_control + * all or do we lose the state some way ? Also, the pmcr * register setting, that can't be set once at boot ? We really want * to move that away in order to implement a simple powersave */ -- cgit v1.2.3-70-g09d2 From bffd4927ba4377aa38be5450e20e0fecd2523fe3 Mon Sep 17 00:00:00 2001 From: Kevin Corry Date: Tue, 24 Oct 2006 18:31:21 +0200 Subject: [POWERPC] cell: add shadow registers for pmd_reg Many of the registers in the performance monitoring unit are write-only. We need to save a "shadow" copy when we write to those registers so we can retrieve the values if we need them later. The new cbe_pmd_shadow_regs structure is added to the cbe_regs_map structure so we have the appropriate per-node copies of these shadow values. Signed-off-by: Kevin Corry Signed-off-by: Arnd Bergmann Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/cell/cbe_regs.c | 17 +++++++++++++++++ arch/powerpc/platforms/cell/cbe_regs.h | 35 ++++++++++++++++++++++++++++++++++ 2 files changed, 52 insertions(+) (limited to 'arch/powerpc') diff --git a/arch/powerpc/platforms/cell/cbe_regs.c b/arch/powerpc/platforms/cell/cbe_regs.c index 5e3e0e925e4..5a91b75c2f0 100644 --- a/arch/powerpc/platforms/cell/cbe_regs.c +++ b/arch/powerpc/platforms/cell/cbe_regs.c @@ -30,6 +30,7 @@ static struct cbe_regs_map struct cbe_pmd_regs __iomem *pmd_regs; struct cbe_iic_regs __iomem *iic_regs; struct cbe_mic_tm_regs __iomem *mic_tm_regs; + struct cbe_pmd_shadow_regs pmd_shadow_regs; } cbe_regs_maps[MAX_CBE]; static int cbe_regs_map_count; @@ -80,6 +81,22 @@ struct cbe_pmd_regs __iomem *cbe_get_cpu_pmd_regs(int cpu) } EXPORT_SYMBOL_GPL(cbe_get_cpu_pmd_regs); +struct cbe_pmd_shadow_regs *cbe_get_pmd_shadow_regs(struct device_node *np) +{ + struct cbe_regs_map *map = cbe_find_map(np); + if (map == NULL) + return NULL; + return &map->pmd_shadow_regs; +} + +struct cbe_pmd_shadow_regs *cbe_get_cpu_pmd_shadow_regs(int cpu) +{ + struct cbe_regs_map *map = cbe_thread_map[cpu].regs; + if (map == NULL) + return NULL; + return &map->pmd_shadow_regs; +} + struct cbe_iic_regs __iomem *cbe_get_iic_regs(struct device_node *np) { struct cbe_regs_map *map = cbe_find_map(np); diff --git a/arch/powerpc/platforms/cell/cbe_regs.h b/arch/powerpc/platforms/cell/cbe_regs.h index 02bdbc1cd6e..d352f110ef9 100644 --- a/arch/powerpc/platforms/cell/cbe_regs.h +++ b/arch/powerpc/platforms/cell/cbe_regs.h @@ -120,6 +120,41 @@ struct cbe_pmd_regs { extern struct cbe_pmd_regs __iomem *cbe_get_pmd_regs(struct device_node *np); extern struct cbe_pmd_regs __iomem *cbe_get_cpu_pmd_regs(int cpu); +/* + * PMU shadow registers + * + * Many of the registers in the performance monitoring unit are write-only, + * so we need to save a copy of what we write to those registers. + * + * The actual data counters are read/write. However, writing to the counters + * only takes effect if the PMU is enabled. Otherwise the value is stored in + * a hardware latch until the next time the PMU is enabled. So we save a copy + * of the counter values if we need to read them back while the PMU is + * disabled. The counter_value_in_latch field is a bitmap indicating which + * counters currently have a value waiting to be written. + */ + +#define NR_PHYS_CTRS 4 +#define NR_CTRS (NR_PHYS_CTRS * 2) + +struct cbe_pmd_shadow_regs { + u32 group_control; + u32 debug_bus_control; + u32 trace_address; + u32 ext_tr_timer; + u32 pm_status; + u32 pm_control; + u32 pm_interval; + u32 pm_start_stop; + u32 pm07_control[NR_CTRS]; + + u32 pm_ctr[NR_PHYS_CTRS]; + u32 counter_value_in_latch; +}; + +extern struct cbe_pmd_shadow_regs *cbe_get_pmd_shadow_regs(struct device_node *np); +extern struct cbe_pmd_shadow_regs *cbe_get_cpu_pmd_shadow_regs(int cpu); + /* * * IIC unit register definitions -- cgit v1.2.3-70-g09d2 From d8bf96e0793f9576da545bac333b2de304958d68 Mon Sep 17 00:00:00 2001 From: Kevin Corry Date: Tue, 24 Oct 2006 18:31:22 +0200 Subject: [POWERPC] cell: add low-level performance monitoring code Add routines for accessing the registers and counters in the performance monitoring unit. Signed-off-by: Kevin Corry Signed-off-by: Arnd Bergmann Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/cell/Makefile | 3 +- arch/powerpc/platforms/cell/cbe_regs.h | 5 + arch/powerpc/platforms/cell/pmu.c | 328 +++++++++++++++++++++++++++++++++ arch/powerpc/platforms/cell/pmu.h | 57 ++++++ 4 files changed, 392 insertions(+), 1 deletion(-) create mode 100644 arch/powerpc/platforms/cell/pmu.c create mode 100644 arch/powerpc/platforms/cell/pmu.h (limited to 'arch/powerpc') diff --git a/arch/powerpc/platforms/cell/Makefile b/arch/powerpc/platforms/cell/Makefile index c89cdd67383..412649b3529 100644 --- a/arch/powerpc/platforms/cell/Makefile +++ b/arch/powerpc/platforms/cell/Makefile @@ -1,5 +1,6 @@ obj-$(CONFIG_PPC_CELL_NATIVE) += interrupt.o iommu.o setup.o \ - cbe_regs.o spider-pic.o pervasive.o + cbe_regs.o spider-pic.o pervasive.o \ + pmu.o obj-$(CONFIG_CBE_RAS) += ras.o ifeq ($(CONFIG_SMP),y) diff --git a/arch/powerpc/platforms/cell/cbe_regs.h b/arch/powerpc/platforms/cell/cbe_regs.h index d352f110ef9..91083f51a0c 100644 --- a/arch/powerpc/platforms/cell/cbe_regs.h +++ b/arch/powerpc/platforms/cell/cbe_regs.h @@ -35,6 +35,11 @@ * */ +/* Macros for the pm_control register. */ +#define CBE_PM_16BIT_CTR(ctr) (1 << (24 - ((ctr) & (NR_PHYS_CTRS - 1)))) +#define CBE_PM_ENABLE_PERF_MON 0x80000000 + + union spe_reg { u64 val; u8 spe[8]; diff --git a/arch/powerpc/platforms/cell/pmu.c b/arch/powerpc/platforms/cell/pmu.c new file mode 100644 index 00000000000..30d17ce236a --- /dev/null +++ b/arch/powerpc/platforms/cell/pmu.c @@ -0,0 +1,328 @@ +/* + * Cell Broadband Engine Performance Monitor + * + * (C) Copyright IBM Corporation 2001,2006 + * + * Author: + * David Erb (djerb@us.ibm.com) + * Kevin Corry (kevcorry@us.ibm.com) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include +#include +#include +#include + +#include "cbe_regs.h" +#include "interrupt.h" +#include "pmu.h" + +/* + * When writing to write-only mmio addresses, save a shadow copy. All of the + * registers are 32-bit, but stored in the upper-half of a 64-bit field in + * pmd_regs. + */ + +#define WRITE_WO_MMIO(reg, x) \ + do { \ + u32 _x = (x); \ + struct cbe_pmd_regs __iomem *pmd_regs; \ + struct cbe_pmd_shadow_regs *shadow_regs; \ + pmd_regs = cbe_get_cpu_pmd_regs(cpu); \ + shadow_regs = cbe_get_cpu_pmd_shadow_regs(cpu); \ + out_be64(&(pmd_regs->reg), (((u64)_x) << 32)); \ + shadow_regs->reg = _x; \ + } while (0) + +#define READ_SHADOW_REG(val, reg) \ + do { \ + struct cbe_pmd_shadow_regs *shadow_regs; \ + shadow_regs = cbe_get_cpu_pmd_shadow_regs(cpu); \ + (val) = shadow_regs->reg; \ + } while (0) + +#define READ_MMIO_UPPER32(val, reg) \ + do { \ + struct cbe_pmd_regs __iomem *pmd_regs; \ + pmd_regs = cbe_get_cpu_pmd_regs(cpu); \ + (val) = (u32)(in_be64(&pmd_regs->reg) >> 32); \ + } while (0) + +/* + * Physical counter registers. + * Each physical counter can act as one 32-bit counter or two 16-bit counters. + */ + +u32 cbe_read_phys_ctr(u32 cpu, u32 phys_ctr) +{ + u32 val_in_latch, val = 0; + + if (phys_ctr < NR_PHYS_CTRS) { + READ_SHADOW_REG(val_in_latch, counter_value_in_latch); + + /* Read the latch or the actual counter, whichever is newer. */ + if (val_in_latch & (1 << phys_ctr)) { + READ_SHADOW_REG(val, pm_ctr[phys_ctr]); + } else { + READ_MMIO_UPPER32(val, pm_ctr[phys_ctr]); + } + } + + return val; +} + +void cbe_write_phys_ctr(u32 cpu, u32 phys_ctr, u32 val) +{ + struct cbe_pmd_shadow_regs *shadow_regs; + u32 pm_ctrl; + + if (phys_ctr < NR_PHYS_CTRS) { + /* Writing to a counter only writes to a hardware latch. + * The new value is not propagated to the actual counter + * until the performance monitor is enabled. + */ + WRITE_WO_MMIO(pm_ctr[phys_ctr], val); + + pm_ctrl = cbe_read_pm(cpu, pm_control); + if (pm_ctrl & CBE_PM_ENABLE_PERF_MON) { + /* The counters are already active, so we need to + * rewrite the pm_control register to "re-enable" + * the PMU. + */ + cbe_write_pm(cpu, pm_control, pm_ctrl); + } else { + shadow_regs = cbe_get_cpu_pmd_shadow_regs(cpu); + shadow_regs->counter_value_in_latch |= (1 << phys_ctr); + } + } +} + +/* + * "Logical" counter registers. + * These will read/write 16-bits or 32-bits depending on the + * current size of the counter. Counters 4 - 7 are always 16-bit. + */ + +u32 cbe_read_ctr(u32 cpu, u32 ctr) +{ + u32 val; + u32 phys_ctr = ctr & (NR_PHYS_CTRS - 1); + + val = cbe_read_phys_ctr(cpu, phys_ctr); + + if (cbe_get_ctr_size(cpu, phys_ctr) == 16) + val = (ctr < NR_PHYS_CTRS) ? (val >> 16) : (val & 0xffff); + + return val; +} + +void cbe_write_ctr(u32 cpu, u32 ctr, u32 val) +{ + u32 phys_ctr; + u32 phys_val; + + phys_ctr = ctr & (NR_PHYS_CTRS - 1); + + if (cbe_get_ctr_size(cpu, phys_ctr) == 16) { + phys_val = cbe_read_phys_ctr(cpu, phys_ctr); + + if (ctr < NR_PHYS_CTRS) + val = (val << 16) | (phys_val & 0xffff); + else + val = (val & 0xffff) | (phys_val & 0xffff0000); + } + + cbe_write_phys_ctr(cpu, phys_ctr, val); +} + +/* + * Counter-control registers. + * Each "logical" counter has a corresponding control register. + */ + +u32 cbe_read_pm07_control(u32 cpu, u32 ctr) +{ + u32 pm07_control = 0; + + if (ctr < NR_CTRS) + READ_SHADOW_REG(pm07_control, pm07_control[ctr]); + + return pm07_control; +} + +void cbe_write_pm07_control(u32 cpu, u32 ctr, u32 val) +{ + if (ctr < NR_CTRS) + WRITE_WO_MMIO(pm07_control[ctr], val); +} + +/* + * Other PMU control registers. Most of these are write-only. + */ + +u32 cbe_read_pm(u32 cpu, enum pm_reg_name reg) +{ + u32 val = 0; + + switch (reg) { + case group_control: + READ_SHADOW_REG(val, group_control); + break; + + case debug_bus_control: + READ_SHADOW_REG(val, debug_bus_control); + break; + + case trace_address: + READ_MMIO_UPPER32(val, trace_address); + break; + + case ext_tr_timer: + READ_SHADOW_REG(val, ext_tr_timer); + break; + + case pm_status: + READ_MMIO_UPPER32(val, pm_status); + break; + + case pm_control: + READ_SHADOW_REG(val, pm_control); + break; + + case pm_interval: + READ_SHADOW_REG(val, pm_interval); + break; + + case pm_start_stop: + READ_SHADOW_REG(val, pm_start_stop); + break; + } + + return val; +} + +void cbe_write_pm(u32 cpu, enum pm_reg_name reg, u32 val) +{ + switch (reg) { + case group_control: + WRITE_WO_MMIO(group_control, val); + break; + + case debug_bus_control: + WRITE_WO_MMIO(debug_bus_control, val); + break; + + case trace_address: + WRITE_WO_MMIO(trace_address, val); + break; + + case ext_tr_timer: + WRITE_WO_MMIO(ext_tr_timer, val); + break; + + case pm_status: + WRITE_WO_MMIO(pm_status, val); + break; + + case pm_control: + WRITE_WO_MMIO(pm_control, val); + break; + + case pm_interval: + WRITE_WO_MMIO(pm_interval, val); + break; + + case pm_start_stop: + WRITE_WO_MMIO(pm_start_stop, val); + break; + } +} + +/* + * Get/set the size of a physical counter to either 16 or 32 bits. + */ + +u32 cbe_get_ctr_size(u32 cpu, u32 phys_ctr) +{ + u32 pm_ctrl, size = 0; + + if (phys_ctr < NR_PHYS_CTRS) { + pm_ctrl = cbe_read_pm(cpu, pm_control); + size = (pm_ctrl & CBE_PM_16BIT_CTR(phys_ctr)) ? 16 : 32; + } + + return size; +} + +void cbe_set_ctr_size(u32 cpu, u32 phys_ctr, u32 ctr_size) +{ + u32 pm_ctrl; + + if (phys_ctr < NR_PHYS_CTRS) { + pm_ctrl = cbe_read_pm(cpu, pm_control); + switch (ctr_size) { + case 16: + pm_ctrl |= CBE_PM_16BIT_CTR(phys_ctr); + break; + + case 32: + pm_ctrl &= ~CBE_PM_16BIT_CTR(phys_ctr); + break; + } + cbe_write_pm(cpu, pm_control, pm_ctrl); + } +} + +/* + * Enable/disable the entire performance monitoring unit. + * When we enable the PMU, all pending writes to counters get committed. + */ + +void cbe_enable_pm(u32 cpu) +{ + struct cbe_pmd_shadow_regs *shadow_regs; + u32 pm_ctrl; + + shadow_regs = cbe_get_cpu_pmd_shadow_regs(cpu); + shadow_regs->counter_value_in_latch = 0; + + pm_ctrl = cbe_read_pm(cpu, pm_control) | CBE_PM_ENABLE_PERF_MON; + cbe_write_pm(cpu, pm_control, pm_ctrl); +} + +void cbe_disable_pm(u32 cpu) +{ + u32 pm_ctrl; + pm_ctrl = cbe_read_pm(cpu, pm_control) & ~CBE_PM_ENABLE_PERF_MON; + cbe_write_pm(cpu, pm_control, pm_ctrl); +} + +/* + * Reading from the trace_buffer. + * The trace buffer is two 64-bit registers. Reading from + * the second half automatically increments the trace_address. + */ + +void cbe_read_trace_buffer(u32 cpu, u64 *buf) +{ + struct cbe_pmd_regs __iomem *pmd_regs = cbe_get_cpu_pmd_regs(cpu); + + *buf++ = in_be64(&pmd_regs->trace_buffer_0_63); + *buf++ = in_be64(&pmd_regs->trace_buffer_64_127); +} + diff --git a/arch/powerpc/platforms/cell/pmu.h b/arch/powerpc/platforms/cell/pmu.h new file mode 100644 index 00000000000..eb1e8e0af91 --- /dev/null +++ b/arch/powerpc/platforms/cell/pmu.h @@ -0,0 +1,57 @@ +/* + * Cell Broadband Engine Performance Monitor + * + * (C) Copyright IBM Corporation 2001,2006 + * + * Author: + * David Erb (djerb@us.ibm.com) + * Kevin Corry (kevcorry@us.ibm.com) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef __PERFMON_H__ +#define __PERFMON_H__ + +enum pm_reg_name { + group_control, + debug_bus_control, + trace_address, + ext_tr_timer, + pm_status, + pm_control, + pm_interval, + pm_start_stop, +}; + +extern u32 cbe_read_phys_ctr(u32 cpu, u32 phys_ctr); +extern void cbe_write_phys_ctr(u32 cpu, u32 phys_ctr, u32 val); +extern u32 cbe_read_ctr(u32 cpu, u32 ctr); +extern void cbe_write_ctr(u32 cpu, u32 ctr, u32 val); + +extern u32 cbe_read_pm07_control(u32 cpu, u32 ctr); +extern void cbe_write_pm07_control(u32 cpu, u32 ctr, u32 val); +extern u32 cbe_read_pm (u32 cpu, enum pm_reg_name reg); +extern void cbe_write_pm (u32 cpu, enum pm_reg_name reg, u32 val); + +extern u32 cbe_get_ctr_size(u32 cpu, u32 phys_ctr); +extern void cbe_set_ctr_size(u32 cpu, u32 phys_ctr, u32 ctr_size); + +extern void cbe_enable_pm(u32 cpu); +extern void cbe_disable_pm(u32 cpu); + +extern void cbe_read_trace_buffer(u32 cpu, u64 *buf); + +#endif -- cgit v1.2.3-70-g09d2 From e570beb6bb1a623849901efbf939063ec4775c9e Mon Sep 17 00:00:00 2001 From: Christian Krafft Date: Tue, 24 Oct 2006 18:31:23 +0200 Subject: [POWERPC] cell: add support for registering sysfs attributes to spus In order to add sysfs attributes to all spu's, there is a need for a list of all available spu's. Adding the device_node makes also sense, as it is needed for proper register access. This patch also adds two functions to create and remove sysfs attributes and attribute_groups to all spus. That allows to group spu attributes in a subdirectory like: /sys/devices/system/spu/spuX/group_name/what_ever This will be used by cbe_thermal to group all attributes dealing with thermal support in one directory. Signed-off-by: Christian Krafft Signed-off-by: Arnd Bergmann Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/cell/spu_base.c | 58 ++++++++++++++++++++++++++++++++++ include/asm-powerpc/spu.h | 9 ++++++ 2 files changed, 67 insertions(+) (limited to 'arch/powerpc') diff --git a/arch/powerpc/platforms/cell/spu_base.c b/arch/powerpc/platforms/cell/spu_base.c index d78b0af038e..b75b091098e 100644 --- a/arch/powerpc/platforms/cell/spu_base.c +++ b/arch/powerpc/platforms/cell/spu_base.c @@ -333,6 +333,7 @@ static void spu_free_irqs(struct spu *spu) } static struct list_head spu_list[MAX_NUMNODES]; +static LIST_HEAD(spu_full_list); static DEFINE_MUTEX(spu_mutex); static void spu_init_channels(struct spu *spu) @@ -744,6 +745,57 @@ struct sysdev_class spu_sysdev_class = { set_kset_name("spu") }; +int spu_add_sysdev_attr(struct sysdev_attribute *attr) +{ + struct spu *spu; + mutex_lock(&spu_mutex); + + list_for_each_entry(spu, &spu_full_list, full_list) + sysdev_create_file(&spu->sysdev, attr); + + mutex_unlock(&spu_mutex); + return 0; +} +EXPORT_SYMBOL_GPL(spu_add_sysdev_attr); + +int spu_add_sysdev_attr_group(struct attribute_group *attrs) +{ + struct spu *spu; + mutex_lock(&spu_mutex); + + list_for_each_entry(spu, &spu_full_list, full_list) + sysfs_create_group(&spu->sysdev.kobj, attrs); + + mutex_unlock(&spu_mutex); + return 0; +} +EXPORT_SYMBOL_GPL(spu_add_sysdev_attr_group); + + +void spu_remove_sysdev_attr(struct sysdev_attribute *attr) +{ + struct spu *spu; + mutex_lock(&spu_mutex); + + list_for_each_entry(spu, &spu_full_list, full_list) + sysdev_remove_file(&spu->sysdev, attr); + + mutex_unlock(&spu_mutex); +} +EXPORT_SYMBOL_GPL(spu_remove_sysdev_attr); + +void spu_remove_sysdev_attr_group(struct attribute_group *attrs) +{ + struct spu *spu; + mutex_lock(&spu_mutex); + + list_for_each_entry(spu, &spu_full_list, full_list) + sysfs_remove_group(&spu->sysdev.kobj, attrs); + + mutex_unlock(&spu_mutex); +} +EXPORT_SYMBOL_GPL(spu_remove_sysdev_attr_group); + static int spu_create_sysdev(struct spu *spu) { int ret; @@ -817,6 +869,9 @@ static int __init create_spu(struct device_node *spe) goto out_free_irqs; list_add(&spu->list, &spu_list[spu->node]); + list_add(&spu->full_list, &spu_full_list); + spu->devnode = of_node_get(spe); + mutex_unlock(&spu_mutex); pr_debug(KERN_DEBUG "Using SPE %s %p %p %p %p %d\n", @@ -839,6 +894,9 @@ out: static void destroy_spu(struct spu *spu) { list_del_init(&spu->list); + list_del_init(&spu->full_list); + + of_node_put(spu->devnode); spu_destroy_sysdev(spu); spu_free_irqs(spu); diff --git a/include/asm-powerpc/spu.h b/include/asm-powerpc/spu.h index 704e8a8d2eb..ffa4df08360 100644 --- a/include/asm-powerpc/spu.h +++ b/include/asm-powerpc/spu.h @@ -115,6 +115,7 @@ struct spu { struct spu_priv2 __iomem *priv2; struct list_head list; struct list_head sched_list; + struct list_head full_list; int number; int nid; unsigned int irqs[3]; @@ -143,6 +144,8 @@ struct spu { char irq_c1[8]; char irq_c2[8]; + struct device_node *devnode; + struct sys_device sysdev; }; @@ -200,6 +203,12 @@ static inline void unregister_spu_syscalls(struct spufs_calls *calls) } #endif /* MODULE */ +int spu_add_sysdev_attr(struct sysdev_attribute *attr); +void spu_remove_sysdev_attr(struct sysdev_attribute *attr); + +int spu_add_sysdev_attr_group(struct attribute_group *attrs); +void spu_remove_sysdev_attr_group(struct attribute_group *attrs); + /* * Notifier blocks: -- cgit v1.2.3-70-g09d2 From 0344c6c5387ba335bba5a66fd44714b94c98573f Mon Sep 17 00:00:00 2001 From: Christian Krafft Date: Tue, 24 Oct 2006 18:31:24 +0200 Subject: [POWERPC] sysfs: add support for adding/removing spu sysfs attributes This patch adds two functions to create and remove sysfs attributes and attribute_group to all cpus. That allows to register sysfs attributes in a subdirectory like: /sys/devices/system/cpu/cpuX/group_name/what_ever This will be used by cbe_thermal to group all attributes dealing with thermal support in one directory. Signed-of-by: Christian Krafft Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/sysfs.c | 66 +++++++++++++++++++++++++++++++++++++++++++++ include/linux/cpu.h | 8 ++++++ 2 files changed, 74 insertions(+) (limited to 'arch/powerpc') diff --git a/arch/powerpc/kernel/sysfs.c b/arch/powerpc/kernel/sysfs.c index d45a168bdac..cda21a27490 100644 --- a/arch/powerpc/kernel/sysfs.c +++ b/arch/powerpc/kernel/sysfs.c @@ -299,6 +299,72 @@ static struct notifier_block __cpuinitdata sysfs_cpu_nb = { .notifier_call = sysfs_cpu_notify, }; +static DEFINE_MUTEX(cpu_mutex); + +int cpu_add_sysdev_attr(struct sysdev_attribute *attr) +{ + int cpu; + + mutex_lock(&cpu_mutex); + + for_each_possible_cpu(cpu) { + sysdev_create_file(get_cpu_sysdev(cpu), attr); + } + + mutex_unlock(&cpu_mutex); + return 0; +} +EXPORT_SYMBOL_GPL(cpu_add_sysdev_attr); + +int cpu_add_sysdev_attr_group(struct attribute_group *attrs) +{ + int cpu; + struct sys_device *sysdev; + + mutex_lock(&cpu_mutex); + + for_each_possible_cpu(cpu) { + sysdev = get_cpu_sysdev(cpu); + sysfs_create_group(&sysdev->kobj, attrs); + } + + mutex_unlock(&cpu_mutex); + return 0; +} +EXPORT_SYMBOL_GPL(cpu_add_sysdev_attr_group); + + +void cpu_remove_sysdev_attr(struct sysdev_attribute *attr) +{ + int cpu; + + mutex_lock(&cpu_mutex); + + for_each_possible_cpu(cpu) { + sysdev_remove_file(get_cpu_sysdev(cpu), attr); + } + + mutex_unlock(&cpu_mutex); +} +EXPORT_SYMBOL_GPL(cpu_remove_sysdev_attr); + +void cpu_remove_sysdev_attr_group(struct attribute_group *attrs) +{ + int cpu; + struct sys_device *sysdev; + + mutex_lock(&cpu_mutex); + + for_each_possible_cpu(cpu) { + sysdev = get_cpu_sysdev(cpu); + sysfs_remove_group(&sysdev->kobj, attrs); + } + + mutex_unlock(&cpu_mutex); +} +EXPORT_SYMBOL_GPL(cpu_remove_sysdev_attr_group); + + /* NUMA stuff */ #ifdef CONFIG_NUMA diff --git a/include/linux/cpu.h b/include/linux/cpu.h index 3fef7d67aed..f02d71bf689 100644 --- a/include/linux/cpu.h +++ b/include/linux/cpu.h @@ -33,6 +33,14 @@ struct cpu { extern int register_cpu(struct cpu *cpu, int num); extern struct sys_device *get_cpu_sysdev(unsigned cpu); + +extern int cpu_add_sysdev_attr(struct sysdev_attribute *attr); +extern void cpu_remove_sysdev_attr(struct sysdev_attribute *attr); + +extern int cpu_add_sysdev_attr_group(struct attribute_group *attrs); +extern void cpu_remove_sysdev_attr_group(struct attribute_group *attrs); + + #ifdef CONFIG_HOTPLUG_CPU extern void unregister_cpu(struct cpu *cpu); #endif -- cgit v1.2.3-70-g09d2 From b3d7dc1967d1303d4897ff9537d29f6e077de147 Mon Sep 17 00:00:00 2001 From: Christian Krafft Date: Tue, 24 Oct 2006 18:31:25 +0200 Subject: [POWERPC] cell: add temperature to SPU and CPU sysfs entries This patch adds a module that registers sysfs attributes to CPU and SPU containing the temperature of the CBE. They can be found under /sys/devices/system/spu/cpuX/thermal/temperature[0|1] /sys/devices/system/spu/spuX/thermal/temperature The temperature is read from the on-chip temperature sensors. Signed-off-by: Christian Krafft Signed-off-by: Arnd Bergmann Signed-off-by: Paul Mackerras --- arch/powerpc/configs/cell_defconfig | 1 + arch/powerpc/platforms/cell/Kconfig | 5 + arch/powerpc/platforms/cell/Makefile | 2 + arch/powerpc/platforms/cell/cbe_thermal.c | 225 ++++++++++++++++++++++++++++++ 4 files changed, 233 insertions(+) create mode 100644 arch/powerpc/platforms/cell/cbe_thermal.c (limited to 'arch/powerpc') diff --git a/arch/powerpc/configs/cell_defconfig b/arch/powerpc/configs/cell_defconfig index 892d5dd3254..910a33193d9 100644 --- a/arch/powerpc/configs/cell_defconfig +++ b/arch/powerpc/configs/cell_defconfig @@ -149,6 +149,7 @@ CONFIG_MMIO_NVRAM=y CONFIG_SPU_FS=m CONFIG_SPU_BASE=y CONFIG_CBE_RAS=y +CONFIG_CBE_THERM=m # # Kernel options diff --git a/arch/powerpc/platforms/cell/Kconfig b/arch/powerpc/platforms/cell/Kconfig index 3e430b489bb..77ae619c758 100644 --- a/arch/powerpc/platforms/cell/Kconfig +++ b/arch/powerpc/platforms/cell/Kconfig @@ -20,4 +20,9 @@ config CBE_RAS bool "RAS features for bare metal Cell BE" default y +config CBE_THERM + tristate "CBE thermal support" + default m + depends on CBE_RAS + endmenu diff --git a/arch/powerpc/platforms/cell/Makefile b/arch/powerpc/platforms/cell/Makefile index 412649b3529..90e131451af 100644 --- a/arch/powerpc/platforms/cell/Makefile +++ b/arch/powerpc/platforms/cell/Makefile @@ -3,6 +3,8 @@ obj-$(CONFIG_PPC_CELL_NATIVE) += interrupt.o iommu.o setup.o \ pmu.o obj-$(CONFIG_CBE_RAS) += ras.o +obj-$(CONFIG_CBE_THERM) += cbe_thermal.o + ifeq ($(CONFIG_SMP),y) obj-$(CONFIG_PPC_CELL_NATIVE) += smp.o endif diff --git a/arch/powerpc/platforms/cell/cbe_thermal.c b/arch/powerpc/platforms/cell/cbe_thermal.c new file mode 100644 index 00000000000..17831a92d91 --- /dev/null +++ b/arch/powerpc/platforms/cell/cbe_thermal.c @@ -0,0 +1,225 @@ +/* + * thermal support for the cell processor + * + * (C) Copyright IBM Deutschland Entwicklung GmbH 2005 + * + * Author: Christian Krafft + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include +#include +#include +#include +#include +#include + +#include "cbe_regs.h" + +static struct cbe_pmd_regs __iomem *get_pmd_regs(struct sys_device *sysdev) +{ + struct spu *spu; + + spu = container_of(sysdev, struct spu, sysdev); + + return cbe_get_pmd_regs(spu->devnode); +} + +/* returns the value for a given spu in a given register */ +static u8 spu_read_register_value(struct sys_device *sysdev, union spe_reg __iomem *reg) +{ + unsigned int *id; + union spe_reg value; + struct spu *spu; + + /* getting the id from the reg attribute will not work on future device-tree layouts + * in future we should store the id to the spu struct and use it here */ + spu = container_of(sysdev, struct spu, sysdev); + id = (unsigned int *)get_property(spu->devnode, "reg", NULL); + value.val = in_be64(®->val); + + return value.spe[*id]; +} + +static ssize_t spu_show_temp(struct sys_device *sysdev, char *buf) +{ + int value; + struct cbe_pmd_regs __iomem *pmd_regs; + + pmd_regs = get_pmd_regs(sysdev); + + value = spu_read_register_value(sysdev, &pmd_regs->ts_ctsr1); + /* clear all other bits */ + value &= 0x3F; + /* temp is stored in steps of 2 degrees */ + value *= 2; + /* base temp is 65 degrees */ + value += 65; + + return sprintf(buf, "%d\n", (int) value); +} + +static ssize_t ppe_show_temp(struct sys_device *sysdev, char *buf, int pos) +{ + struct cbe_pmd_regs __iomem *pmd_regs; + u64 value; + + pmd_regs = cbe_get_cpu_pmd_regs(sysdev->id); + value = in_be64(&pmd_regs->ts_ctsr2); + + /* access the corresponding byte */ + value >>= pos; + /* clear all other bits */ + value &= 0x3F; + /* temp is stored in steps of 2 degrees */ + value *= 2; + /* base temp is 65 degrees */ + value += 65; + + return sprintf(buf, "%d\n", (int) value); +} + + +/* shows the temperature of the DTS on the PPE, + * located near the linear thermal sensor */ +static ssize_t ppe_show_temp0(struct sys_device *sysdev, char *buf) +{ + return ppe_show_temp(sysdev, buf, 32); +} + +/* shows the temperature of the second DTS on the PPE */ +static ssize_t ppe_show_temp1(struct sys_device *sysdev, char *buf) +{ + return ppe_show_temp(sysdev, buf, 0); +} + +static struct sysdev_attribute attr_spu_temperature = { + .attr = {.name = "temperature", .mode = 0400 }, + .show = spu_show_temp, +}; + +static struct attribute *spu_attributes[] = { + &attr_spu_temperature.attr, +}; + +static struct attribute_group spu_attribute_group = { + .name = "thermal", + .attrs = spu_attributes, +}; + +static struct sysdev_attribute attr_ppe_temperature0 = { + .attr = {.name = "temperature0", .mode = 0400 }, + .show = ppe_show_temp0, +}; + +static struct sysdev_attribute attr_ppe_temperature1 = { + .attr = {.name = "temperature1", .mode = 0400 }, + .show = ppe_show_temp1, +}; + +static struct attribute *ppe_attributes[] = { + &attr_ppe_temperature0.attr, + &attr_ppe_temperature1.attr, +}; + +static struct attribute_group ppe_attribute_group = { + .name = "thermal", + .attrs = ppe_attributes, +}; + +/* + * initialize throttling with default values + */ +static void __init init_default_values(void) +{ + int cpu; + struct cbe_pmd_regs __iomem *pmd_regs; + struct sys_device *sysdev; + union ppe_spe_reg tpr; + union spe_reg str1; + u64 str2; + union spe_reg cr1; + u64 cr2; + + /* TPR defaults */ + /* ppe + * 1F - no full stop + * 08 - dynamic throttling starts if over 80 degrees + * 03 - dynamic throttling ceases if below 70 degrees */ + tpr.ppe = 0x1F0803; + /* spe + * 10 - full stopped when over 96 degrees + * 08 - dynamic throttling starts if over 80 degrees + * 03 - dynamic throttling ceases if below 70 degrees + */ + tpr.spe = 0x100803; + + /* STR defaults */ + /* str1 + * 10 - stop 16 of 32 cycles + */ + str1.val = 0x1010101010101010ull; + /* str2 + * 10 - stop 16 of 32 cycles + */ + str2 = 0x10; + + /* CR defaults */ + /* cr1 + * 4 - normal operation + */ + cr1.val = 0x0404040404040404ull; + /* cr2 + * 4 - normal operation + */ + cr2 = 0x04; + + for_each_possible_cpu (cpu) { + pr_debug("processing cpu %d\n", cpu); + sysdev = get_cpu_sysdev(cpu); + pmd_regs = cbe_get_cpu_pmd_regs(sysdev->id); + + out_be64(&pmd_regs->tm_str2, str2); + out_be64(&pmd_regs->tm_str1.val, str1.val); + out_be64(&pmd_regs->tm_tpr.val, tpr.val); + out_be64(&pmd_regs->tm_cr1.val, cr1.val); + out_be64(&pmd_regs->tm_cr2, cr2); + } +} + + +static int __init thermal_init(void) +{ + init_default_values(); + + spu_add_sysdev_attr_group(&spu_attribute_group); + cpu_add_sysdev_attr_group(&ppe_attribute_group); + + return 0; +} +module_init(thermal_init); + +static void __exit thermal_exit(void) +{ + spu_remove_sysdev_attr_group(&spu_attribute_group); + cpu_remove_sysdev_attr_group(&ppe_attribute_group); +} +module_exit(thermal_exit); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Christian Krafft "); + -- cgit v1.2.3-70-g09d2 From 302eca184fb844670fb128c69e22a8a28bbce48a Mon Sep 17 00:00:00 2001 From: "arnd@arndb.de" Date: Tue, 24 Oct 2006 18:31:26 +0200 Subject: [POWERPC] cell: use ppc_md->power_save instead of cbe_idle_loop This moves the cell idle function to use the default cpu_idle with a special power_save callback, like all other platforms except iSeries already do. It also makes it possible to disable this power_save function with a new powerpc-specific boot option "powersave=off". Signed-off-by: Arnd Bergmann Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/idle.c | 7 +++ arch/powerpc/platforms/cell/pervasive.c | 96 ++++++++++----------------------- 2 files changed, 34 insertions(+), 69 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/kernel/idle.c b/arch/powerpc/kernel/idle.c index 4180c3998b3..8994af327b4 100644 --- a/arch/powerpc/kernel/idle.c +++ b/arch/powerpc/kernel/idle.c @@ -39,6 +39,13 @@ #define cpu_should_die() 0 #endif +static int __init powersave_off(char *arg) +{ + ppc_md.power_save = NULL; + return 0; +} +__setup("powersave=off", powersave_off); + /* * The body of the idle task. */ diff --git a/arch/powerpc/platforms/cell/pervasive.c b/arch/powerpc/platforms/cell/pervasive.c index fdcd89e99f1..c68fabdc787 100644 --- a/arch/powerpc/platforms/cell/pervasive.c +++ b/arch/powerpc/platforms/cell/pervasive.c @@ -38,32 +38,16 @@ #include "pervasive.h" #include "cbe_regs.h" -static DEFINE_SPINLOCK(cbe_pervasive_lock); - -static void __init cbe_enable_pause_zero(void) +static void cbe_power_save(void) { - unsigned long thread_switch_control; - unsigned long temp_register; - struct cbe_pmd_regs __iomem *pregs; - - spin_lock_irq(&cbe_pervasive_lock); - pregs = cbe_get_cpu_pmd_regs(smp_processor_id()); - if (pregs == NULL) - goto out; - - pr_debug("Power Management: CPU %d\n", smp_processor_id()); - - /* Enable Pause(0) control bit */ - temp_register = in_be64(&pregs->pmcr); - - out_be64(&pregs->pmcr, - temp_register | CBE_PMD_PAUSE_ZERO_CONTROL); + unsigned long ctrl, thread_switch_control; + ctrl = mfspr(SPRN_CTRLF); /* Enable DEC and EE interrupt request */ thread_switch_control = mfspr(SPRN_TSC_CELL); thread_switch_control |= TSC_CELL_EE_ENABLE | TSC_CELL_EE_BOOST; - switch ((mfspr(SPRN_CTRLF) & CTRL_CT)) { + switch (ctrl & CTRL_CT) { case CTRL_CT0: thread_switch_control |= TSC_CELL_DEC_ENABLE_0; break; @@ -75,58 +59,21 @@ static void __init cbe_enable_pause_zero(void) __FUNCTION__); break; } - mtspr(SPRN_TSC_CELL, thread_switch_control); -out: - spin_unlock_irq(&cbe_pervasive_lock); -} - -static void cbe_idle(void) -{ - unsigned long ctrl; - - /* Why do we do that on every idle ? Couldn't that be done once for - * all or do we lose the state some way ? Also, the pmcr - * register setting, that can't be set once at boot ? We really want - * to move that away in order to implement a simple powersave + /* + * go into low thread priority, medium priority will be + * restored for us after wake-up. */ - cbe_enable_pause_zero(); - - while (1) { - if (!need_resched()) { - local_irq_disable(); - while (!need_resched()) { - /* go into low thread priority */ - HMT_low(); - - /* - * atomically disable thread execution - * and runlatch. - * External and Decrementer exceptions - * are still handled when the thread - * is disabled but now enter in - * cbe_system_reset_exception() - */ - ctrl = mfspr(SPRN_CTRLF); - ctrl &= ~(CTRL_RUNLATCH | CTRL_TE); - mtspr(SPRN_CTRLT, ctrl); - } - /* restore thread prio */ - HMT_medium(); - local_irq_enable(); - } + HMT_low(); - /* - * turn runlatch on again before scheduling the - * process we just woke up - */ - ppc64_runlatch_on(); - - preempt_enable_no_resched(); - schedule(); - preempt_disable(); - } + /* + * atomically disable thread execution and runlatch. + * External and Decrementer exceptions are still handled when the + * thread is disabled but now enter in cbe_system_reset_exception() + */ + ctrl &= ~(CTRL_RUNLATCH | CTRL_TE); + mtspr(SPRN_CTRLT, ctrl); } static int cbe_system_reset_exception(struct pt_regs *regs) @@ -158,9 +105,20 @@ static int cbe_system_reset_exception(struct pt_regs *regs) void __init cbe_pervasive_init(void) { + int cpu; if (!cpu_has_feature(CPU_FTR_PAUSE_ZERO)) return; - ppc_md.idle_loop = cbe_idle; + for_each_possible_cpu(cpu) { + struct cbe_pmd_regs __iomem *regs = cbe_get_cpu_pmd_regs(cpu); + if (!regs) + continue; + + /* Enable Pause(0) control bit */ + out_be64(®s->pmcr, in_be64(®s->pmcr) | + CBE_PMD_PAUSE_ZERO_CONTROL); + } + + ppc_md.power_save = cbe_power_save; ppc_md.system_reset_exception = cbe_system_reset_exception; } -- cgit v1.2.3-70-g09d2 From ff8a8f25976aa58bbae7883405b00dcbaf4cc823 Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Tue, 24 Oct 2006 18:31:27 +0200 Subject: [POWERPC] add support for stopping spus from xmon This patch adds support for stopping, and restarting, spus from xmon. We use the spu master runcntl bit to stop execution, this is apparently the "right" way to control spu execution and spufs will be changed in the future to use this bit. Testing has shown that to restart execution we have to turn the master runcntl bit on and also rewrite the spu runcntl bit, even if it is already set to 1 (running). Stopping spus is triggered by the xmon command 'ss' - "spus stop" perhaps. Restarting them is triggered via 'sr'. Restart doesn't start execution on spus unless they were running prior to being stopped by xmon. Walking the spu->full_list in xmon after a panic, would mean corruption of any spu struct would make all the others inaccessible. To avoid this, and also to make the next patch easier, we cache pointers to all spus during boot. We attempt to catch and recover from errors while stopping and restarting the spus, but as with most xmon functionality there are no guarantees that performing these operations won't crash xmon itself. Signed-off-by: Michael Ellerman Signed-off-by: Arnd Bergmann Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/cell/spu_base.c | 4 + arch/powerpc/xmon/xmon.c | 142 ++++++++++++++++++++++++++++++++- include/asm-powerpc/xmon.h | 2 + 3 files changed, 146 insertions(+), 2 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/platforms/cell/spu_base.c b/arch/powerpc/platforms/cell/spu_base.c index b75b091098e..032bc923342 100644 --- a/arch/powerpc/platforms/cell/spu_base.c +++ b/arch/powerpc/platforms/cell/spu_base.c @@ -38,6 +38,7 @@ #include #include #include +#include #include "interrupt.h" @@ -943,6 +944,9 @@ static int __init init_spu_base(void) break; } } + + xmon_register_spus(&spu_full_list); + return ret; } module_init(init_spu_base); diff --git a/arch/powerpc/xmon/xmon.c b/arch/powerpc/xmon/xmon.c index f56ffef4def..6a2ed8b319f 100644 --- a/arch/powerpc/xmon/xmon.c +++ b/arch/powerpc/xmon/xmon.c @@ -37,6 +37,8 @@ #include #include #include +#include +#include #ifdef CONFIG_PPC64 #include @@ -147,6 +149,8 @@ static void xmon_print_symbol(unsigned long address, const char *mid, const char *after); static const char *getvecname(unsigned long vec); +static int do_spu_cmd(void); + int xmon_no_auto_backtrace; extern int print_insn_powerpc(unsigned long, unsigned long, int); @@ -209,8 +213,12 @@ Commands:\n\ mi show information about memory allocation\n\ p call a procedure\n\ r print registers\n\ - s single step\n\ - S print special registers\n\ + s single step\n" +#ifdef CONFIG_PPC_CELL +" ss stop execution on all spus\n\ + sr restore execution on stopped spus\n" +#endif +" S print special registers\n\ t print backtrace\n\ x exit monitor and recover\n\ X exit monitor and dont recover\n" @@ -518,6 +526,7 @@ int xmon(struct pt_regs *excp) xmon_save_regs(®s); excp = ®s; } + return xmon_core(excp, 0); } EXPORT_SYMBOL(xmon); @@ -809,6 +818,8 @@ cmds(struct pt_regs *excp) cacheflush(); break; case 's': + if (do_spu_cmd() == 0) + break; if (do_step(excp)) return cmd; break; @@ -2630,3 +2641,130 @@ void __init xmon_setup(void) if (xmon_early) debugger(NULL); } + +#ifdef CONFIG_PPC_CELL + +struct spu_info { + struct spu *spu; + u64 saved_mfc_sr1_RW; + u32 saved_spu_runcntl_RW; + u8 stopped_ok; +}; + +#define XMON_NUM_SPUS 16 /* Enough for current hardware */ + +static struct spu_info spu_info[XMON_NUM_SPUS]; + +void xmon_register_spus(struct list_head *list) +{ + struct spu *spu; + + list_for_each_entry(spu, list, full_list) { + if (spu->number >= XMON_NUM_SPUS) { + WARN_ON(1); + continue; + } + + spu_info[spu->number].spu = spu; + spu_info[spu->number].stopped_ok = 0; + } +} + +static void stop_spus(void) +{ + struct spu *spu; + int i; + u64 tmp; + + for (i = 0; i < XMON_NUM_SPUS; i++) { + if (!spu_info[i].spu) + continue; + + if (setjmp(bus_error_jmp) == 0) { + catch_memory_errors = 1; + sync(); + + spu = spu_info[i].spu; + + spu_info[i].saved_spu_runcntl_RW = + in_be32(&spu->problem->spu_runcntl_RW); + + tmp = spu_mfc_sr1_get(spu); + spu_info[i].saved_mfc_sr1_RW = tmp; + + tmp &= ~MFC_STATE1_MASTER_RUN_CONTROL_MASK; + spu_mfc_sr1_set(spu, tmp); + + sync(); + __delay(200); + + spu_info[i].stopped_ok = 1; + printf("Stopped spu %.2d\n", i); + } else { + catch_memory_errors = 0; + printf("*** Error stopping spu %.2d\n", i); + } + catch_memory_errors = 0; + } +} + +static void restart_spus(void) +{ + struct spu *spu; + int i; + + for (i = 0; i < XMON_NUM_SPUS; i++) { + if (!spu_info[i].spu) + continue; + + if (!spu_info[i].stopped_ok) { + printf("*** Error, spu %d was not successfully stopped" + ", not restarting\n", i); + continue; + } + + if (setjmp(bus_error_jmp) == 0) { + catch_memory_errors = 1; + sync(); + + spu = spu_info[i].spu; + spu_mfc_sr1_set(spu, spu_info[i].saved_mfc_sr1_RW); + out_be32(&spu->problem->spu_runcntl_RW, + spu_info[i].saved_spu_runcntl_RW); + + sync(); + __delay(200); + + printf("Restarted spu %.2d\n", i); + } else { + catch_memory_errors = 0; + printf("*** Error restarting spu %.2d\n", i); + } + catch_memory_errors = 0; + } +} + +static int do_spu_cmd(void) +{ + int cmd; + + cmd = inchar(); + switch (cmd) { + case 's': + stop_spus(); + break; + case 'r': + restart_spus(); + break; + default: + return -1; + } + + return 0; +} +#else /* ! CONFIG_PPC_CELL */ +static int do_spu_cmd(void) +{ + return -1; +} +#endif diff --git a/include/asm-powerpc/xmon.h b/include/asm-powerpc/xmon.h index f1d337ed68d..88320a05f0a 100644 --- a/include/asm-powerpc/xmon.h +++ b/include/asm-powerpc/xmon.h @@ -14,8 +14,10 @@ #ifdef CONFIG_XMON extern void xmon_setup(void); +extern void xmon_register_spus(struct list_head *list); #else static inline void xmon_setup(void) { }; +static inline void xmon_register_spus(struct list_head *list) { }; #endif #endif /* __KERNEL __ */ -- cgit v1.2.3-70-g09d2 From a898497088f46252e6750405504064e2dce53117 Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Tue, 24 Oct 2006 18:31:28 +0200 Subject: [POWERPC] add support for dumping spu info from xmon This patch adds a command to xmon for dumping information about spu structs. The command is 'sf' for "spu fields" perhaps, and takes the spu number as an argument. This is the same value as the spu->number field, or the "phys-id" value of a context when it is bound to a physical spu. We try to catch memory errors as we dump each field, hopefully this will make the command reasonably robust, but YMMV. If people see a need we can easily add more fields to the dump in future. Output looks something like this: 0:mon> sf 0 Dumping spu fields at address c00000001ffd9e80: number = 0x0 name = spe devnode->full_name = /cpus/PowerPC,BE@0/spes/spe@0 nid = 0x0 local_store_phys = 0x20000000000 local_store = 0xd0000800801e0000 ls_size = 0x0 isrc = 0x4 node = 0x0 flags = 0x0 dar = 0x0 dsisr = 0x0 class_0_pending = 0 irqs[0] = 0x16 irqs[1] = 0x17 irqs[2] = 0x24 slb_replace = 0x0 pid = 0 prio = 0 mm = 0x0000000000000000 ctx = 0x0000000000000000 rq = 0x0000000000000000 timestamp = 0x0000000000000000 problem_phys = 0x20000040000 problem = 0xd000080080220000 problem->spu_runcntl_RW = 0x0 problem->spu_status_R = 0x0 problem->spu_npc_RW = 0x0 priv1 = 0xd000080080240000 priv1->mfc_sr1_RW = 0x33 priv2 = 0xd000080080250000 Signed-off-by: Michael Ellerman Signed-off-by: Arnd Bergmann Signed-off-by: Paul Mackerras --- arch/powerpc/xmon/xmon.c | 67 +++++++++++++++++++++++++++++++++++++++++++++++- 1 file changed, 66 insertions(+), 1 deletion(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/xmon/xmon.c b/arch/powerpc/xmon/xmon.c index 6a2ed8b319f..0689c084577 100644 --- a/arch/powerpc/xmon/xmon.c +++ b/arch/powerpc/xmon/xmon.c @@ -216,7 +216,8 @@ Commands:\n\ s single step\n" #ifdef CONFIG_PPC_CELL " ss stop execution on all spus\n\ - sr restore execution on stopped spus\n" + sr restore execution on stopped spus\n\ + sf # dump spu fields for spu # (in hex)\n" #endif " S print special registers\n\ t print backtrace\n\ @@ -2744,8 +2745,66 @@ static void restart_spus(void) } } +#define DUMP_WIDTH 23 +#define DUMP_FIELD(obj, format, field) \ +do { \ + if (setjmp(bus_error_jmp) == 0) { \ + catch_memory_errors = 1; \ + sync(); \ + printf(" %-*s = "format"\n", DUMP_WIDTH, \ + #field, obj->field); \ + sync(); \ + __delay(200); \ + } else { \ + catch_memory_errors = 0; \ + printf(" %-*s = *** Error reading field.\n", \ + DUMP_WIDTH, #field); \ + } \ + catch_memory_errors = 0; \ +} while (0) + +static void dump_spu_fields(struct spu *spu) +{ + printf("Dumping spu fields at address %p:\n", spu); + + DUMP_FIELD(spu, "0x%x", number); + DUMP_FIELD(spu, "%s", name); + DUMP_FIELD(spu, "%s", devnode->full_name); + DUMP_FIELD(spu, "0x%x", nid); + DUMP_FIELD(spu, "0x%lx", local_store_phys); + DUMP_FIELD(spu, "0x%p", local_store); + DUMP_FIELD(spu, "0x%lx", ls_size); + DUMP_FIELD(spu, "0x%x", node); + DUMP_FIELD(spu, "0x%lx", flags); + DUMP_FIELD(spu, "0x%lx", dar); + DUMP_FIELD(spu, "0x%lx", dsisr); + DUMP_FIELD(spu, "%d", class_0_pending); + DUMP_FIELD(spu, "0x%lx", irqs[0]); + DUMP_FIELD(spu, "0x%lx", irqs[1]); + DUMP_FIELD(spu, "0x%lx", irqs[2]); + DUMP_FIELD(spu, "0x%x", slb_replace); + DUMP_FIELD(spu, "%d", pid); + DUMP_FIELD(spu, "%d", prio); + DUMP_FIELD(spu, "0x%p", mm); + DUMP_FIELD(spu, "0x%p", ctx); + DUMP_FIELD(spu, "0x%p", rq); + DUMP_FIELD(spu, "0x%p", timestamp); + DUMP_FIELD(spu, "0x%lx", problem_phys); + DUMP_FIELD(spu, "0x%p", problem); + DUMP_FIELD(spu, "0x%x", problem->spu_runcntl_RW); + DUMP_FIELD(spu, "0x%x", problem->spu_status_R); + DUMP_FIELD(spu, "0x%x", problem->spu_npc_RW); + DUMP_FIELD(spu, "0x%p", priv1); + + if (spu->priv1) + DUMP_FIELD(spu, "0x%lx", priv1->mfc_sr1_RW); + + DUMP_FIELD(spu, "0x%p", priv2); +} + static int do_spu_cmd(void) { + unsigned long num = 0; int cmd; cmd = inchar(); @@ -2756,6 +2815,12 @@ static int do_spu_cmd(void) case 'r': restart_spus(); break; + case 'f': + if (scanhex(&num) && num < XMON_NUM_SPUS && spu_info[num].spu) + dump_spu_fields(spu_info[num].spu); + else + printf("*** Error: invalid spu number\n"); + break; default: return -1; } -- cgit v1.2.3-70-g09d2 From 36ca4ba4b9728f3c420a589a3322c2fbd7ec88b7 Mon Sep 17 00:00:00 2001 From: Christian Krafft Date: Tue, 24 Oct 2006 18:39:45 +0200 Subject: [POWERPC] cell: add cpufreq driver for Cell BE processor This patch adds a cpufreq backend driver to enable frequency scaling on cell. Signed-off-by: Christian Krafft Signed-off-by: Arnd Bergmann Signed-off-by: Paul Mackerras --- arch/powerpc/configs/cell_defconfig | 15 +- arch/powerpc/kernel/prom.c | 1 + arch/powerpc/kernel/smp.c | 1 + arch/powerpc/platforms/cell/Kconfig | 9 ++ arch/powerpc/platforms/cell/Makefile | 1 + arch/powerpc/platforms/cell/cbe_cpufreq.c | 248 ++++++++++++++++++++++++++++++ 6 files changed, 274 insertions(+), 1 deletion(-) create mode 100644 arch/powerpc/platforms/cell/cbe_cpufreq.c (limited to 'arch/powerpc') diff --git a/arch/powerpc/configs/cell_defconfig b/arch/powerpc/configs/cell_defconfig index 910a33193d9..c5c54f49ae5 100644 --- a/arch/powerpc/configs/cell_defconfig +++ b/arch/powerpc/configs/cell_defconfig @@ -139,7 +139,19 @@ CONFIG_RTAS_FLASH=y CONFIG_MMIO_NVRAM=y # CONFIG_PPC_MPC106 is not set # CONFIG_PPC_970_NAP is not set -# CONFIG_CPU_FREQ is not set +CONFIG_CPU_FREQ=y +CONFIG_CPU_FREQ_TABLE=y +CONFIG_CPU_FREQ_DEBUG=y +CONFIG_CPU_FREQ_STAT=y +# CONFIG_CPU_FREQ_STAT_DETAILS is not set +CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y +# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set +CONFIG_CPU_FREQ_GOV_PERFORMANCE=y +CONFIG_CPU_FREQ_GOV_POWERSAVE=y +CONFIG_CPU_FREQ_GOV_USERSPACE=y +CONFIG_CPU_FREQ_GOV_ONDEMAND=y +CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y +# CONFIG_CPU_FREQ_PMAC64 is not set # CONFIG_WANT_EARLY_SERIAL is not set # CONFIG_MPIC is not set @@ -150,6 +162,7 @@ CONFIG_SPU_FS=m CONFIG_SPU_BASE=y CONFIG_CBE_RAS=y CONFIG_CBE_THERM=m +CONFIG_CBE_CPUFREQ=m # # Kernel options diff --git a/arch/powerpc/kernel/prom.c b/arch/powerpc/kernel/prom.c index 865b9648d0d..f8e44c029d9 100644 --- a/arch/powerpc/kernel/prom.c +++ b/arch/powerpc/kernel/prom.c @@ -1672,6 +1672,7 @@ struct device_node *of_get_cpu_node(int cpu, unsigned int *thread) } return NULL; } +EXPORT_SYMBOL(of_get_cpu_node); #ifdef DEBUG static struct debugfs_blob_wrapper flat_dt_blob; diff --git a/arch/powerpc/kernel/smp.c b/arch/powerpc/kernel/smp.c index 35c6309bdb7..9b28c238b6c 100644 --- a/arch/powerpc/kernel/smp.c +++ b/arch/powerpc/kernel/smp.c @@ -65,6 +65,7 @@ cpumask_t cpu_sibling_map[NR_CPUS] = { [0 ... NR_CPUS-1] = CPU_MASK_NONE }; EXPORT_SYMBOL(cpu_online_map); EXPORT_SYMBOL(cpu_possible_map); +EXPORT_SYMBOL(cpu_sibling_map); /* SMP operations for this machine */ struct smp_ops_t *smp_ops; diff --git a/arch/powerpc/platforms/cell/Kconfig b/arch/powerpc/platforms/cell/Kconfig index 77ae619c758..06a85b70433 100644 --- a/arch/powerpc/platforms/cell/Kconfig +++ b/arch/powerpc/platforms/cell/Kconfig @@ -25,4 +25,13 @@ config CBE_THERM default m depends on CBE_RAS +config CBE_CPUFREQ + tristate "CBE frequency scaling" + depends on CBE_RAS && CPU_FREQ + default m + help + This adds the cpufreq driver for Cell BE processors. + For details, take a look at . + If you don't have such processor, say N + endmenu diff --git a/arch/powerpc/platforms/cell/Makefile b/arch/powerpc/platforms/cell/Makefile index 90e131451af..0f31db7a50a 100644 --- a/arch/powerpc/platforms/cell/Makefile +++ b/arch/powerpc/platforms/cell/Makefile @@ -4,6 +4,7 @@ obj-$(CONFIG_PPC_CELL_NATIVE) += interrupt.o iommu.o setup.o \ obj-$(CONFIG_CBE_RAS) += ras.o obj-$(CONFIG_CBE_THERM) += cbe_thermal.o +obj-$(CONFIG_CBE_CPUFREQ) += cbe_cpufreq.o ifeq ($(CONFIG_SMP),y) obj-$(CONFIG_PPC_CELL_NATIVE) += smp.o diff --git a/arch/powerpc/platforms/cell/cbe_cpufreq.c b/arch/powerpc/platforms/cell/cbe_cpufreq.c new file mode 100644 index 00000000000..a3850fd1e94 --- /dev/null +++ b/arch/powerpc/platforms/cell/cbe_cpufreq.c @@ -0,0 +1,248 @@ +/* + * cpufreq driver for the cell processor + * + * (C) Copyright IBM Deutschland Entwicklung GmbH 2005 + * + * Author: Christian Krafft + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include + +#include +#include +#include +#include +#include + +#include "cbe_regs.h" + +static DEFINE_MUTEX(cbe_switch_mutex); + + +/* the CBE supports an 8 step frequency scaling */ +static struct cpufreq_frequency_table cbe_freqs[] = { + {1, 0}, + {2, 0}, + {3, 0}, + {4, 0}, + {5, 0}, + {6, 0}, + {8, 0}, + {10, 0}, + {0, CPUFREQ_TABLE_END}, +}; + +/* to write to MIC register */ +static u64 MIC_Slow_Fast_Timer_table[] = { + [0 ... 7] = 0x007fc00000000000ull, +}; + +/* more values for the MIC */ +static u64 MIC_Slow_Next_Timer_table[] = { + 0x0000240000000000ull, + 0x0000268000000000ull, + 0x000029C000000000ull, + 0x00002D0000000000ull, + 0x0000300000000000ull, + 0x0000334000000000ull, + 0x000039C000000000ull, + 0x00003FC000000000ull, +}; + +/* + * hardware specific functions + */ + +static int get_pmode(int cpu) +{ + int ret; + struct cbe_pmd_regs __iomem *pmd_regs; + + pmd_regs = cbe_get_cpu_pmd_regs(cpu); + ret = in_be64(&pmd_regs->pmsr) & 0x07; + + return ret; +} + +static int set_pmode(int cpu, unsigned int pmode) +{ + struct cbe_pmd_regs __iomem *pmd_regs; + struct cbe_mic_tm_regs __iomem *mic_tm_regs; + u64 flags; + u64 value; + + local_irq_save(flags); + + mic_tm_regs = cbe_get_cpu_mic_tm_regs(cpu); + pmd_regs = cbe_get_cpu_pmd_regs(cpu); + + pr_debug("pm register is mapped at %p\n", &pmd_regs->pmcr); + pr_debug("mic register is mapped at %p\n", &mic_tm_regs->slow_fast_timer_0); + + out_be64(&mic_tm_regs->slow_fast_timer_0, MIC_Slow_Fast_Timer_table[pmode]); + out_be64(&mic_tm_regs->slow_fast_timer_1, MIC_Slow_Fast_Timer_table[pmode]); + + out_be64(&mic_tm_regs->slow_next_timer_0, MIC_Slow_Next_Timer_table[pmode]); + out_be64(&mic_tm_regs->slow_next_timer_1, MIC_Slow_Next_Timer_table[pmode]); + + value = in_be64(&pmd_regs->pmcr); + /* set bits to zero */ + value &= 0xFFFFFFFFFFFFFFF8ull; + /* set bits to next pmode */ + value |= pmode; + + out_be64(&pmd_regs->pmcr, value); + + /* wait until new pmode appears in status register */ + value = in_be64(&pmd_regs->pmsr) & 0x07; + while(value != pmode) { + cpu_relax(); + value = in_be64(&pmd_regs->pmsr) & 0x07; + } + + local_irq_restore(flags); + + return 0; +} + +/* + * cpufreq functions + */ + +static int cbe_cpufreq_cpu_init (struct cpufreq_policy *policy) +{ + u32 *max_freq; + int i, cur_pmode; + struct device_node *cpu; + + cpu = of_get_cpu_node(policy->cpu, NULL); + + if(!cpu) + return -ENODEV; + + pr_debug("init cpufreq on CPU %d\n", policy->cpu); + + max_freq = (u32*) get_property(cpu, "clock-frequency", NULL); + + if(!max_freq) + return -EINVAL; + + // we need the freq in kHz + *max_freq /= 1000; + + pr_debug("max clock-frequency is at %u kHz\n", *max_freq); + pr_debug("initializing frequency table\n"); + + // initialize frequency table + for (i=0; cbe_freqs[i].frequency!=CPUFREQ_TABLE_END; i++) { + cbe_freqs[i].frequency = *max_freq / cbe_freqs[i].index; + pr_debug("%d: %d\n", i, cbe_freqs[i].frequency); + } + + policy->governor = CPUFREQ_DEFAULT_GOVERNOR; + /* if DEBUG is enabled set_pmode() measures the correct latency of a transition */ + policy->cpuinfo.transition_latency = 25000; + + cur_pmode = get_pmode(policy->cpu); + pr_debug("current pmode is at %d\n",cur_pmode); + + policy->cur = cbe_freqs[cur_pmode].frequency; + +#ifdef CONFIG_SMP + policy->cpus = cpu_sibling_map[policy->cpu]; +#endif + + cpufreq_frequency_table_get_attr (cbe_freqs, policy->cpu); + + /* this ensures that policy->cpuinfo_min and policy->cpuinfo_max are set correctly */ + return cpufreq_frequency_table_cpuinfo (policy, cbe_freqs); +} + +static int cbe_cpufreq_cpu_exit(struct cpufreq_policy *policy) +{ + cpufreq_frequency_table_put_attr(policy->cpu); + return 0; +} + +static int cbe_cpufreq_verify(struct cpufreq_policy *policy) +{ + return cpufreq_frequency_table_verify(policy, cbe_freqs); +} + + +static int cbe_cpufreq_target(struct cpufreq_policy *policy, unsigned int target_freq, + unsigned int relation) +{ + int rc; + struct cpufreq_freqs freqs; + int cbe_pmode_new; + + cpufreq_frequency_table_target(policy, + cbe_freqs, + target_freq, + relation, + &cbe_pmode_new); + + freqs.old = policy->cur; + freqs.new = cbe_freqs[cbe_pmode_new].frequency; + freqs.cpu = policy->cpu; + + mutex_lock (&cbe_switch_mutex); + cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); + + pr_debug("setting frequency for cpu %d to %d kHz, 1/%d of max frequency\n", + policy->cpu, + cbe_freqs[cbe_pmode_new].frequency, + cbe_freqs[cbe_pmode_new].index); + + rc = set_pmode(policy->cpu, cbe_pmode_new); + cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); + mutex_unlock(&cbe_switch_mutex); + + return rc; +} + +static struct cpufreq_driver cbe_cpufreq_driver = { + .verify = cbe_cpufreq_verify, + .target = cbe_cpufreq_target, + .init = cbe_cpufreq_cpu_init, + .exit = cbe_cpufreq_cpu_exit, + .name = "cbe-cpufreq", + .owner = THIS_MODULE, + .flags = CPUFREQ_CONST_LOOPS, +}; + +/* + * module init and destoy + */ + +static int __init cbe_cpufreq_init(void) +{ + return cpufreq_register_driver(&cbe_cpufreq_driver); +} + +static void __exit cbe_cpufreq_exit(void) +{ + cpufreq_unregister_driver(&cbe_cpufreq_driver); +} + +module_init(cbe_cpufreq_init); +module_exit(cbe_cpufreq_exit); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Christian Krafft "); -- cgit v1.2.3-70-g09d2 From a7a1ed305043961ed06e0ee5e7a4a2cc1250f4b5 Mon Sep 17 00:00:00 2001 From: "s.hauer@pengutronix.de" Date: Thu, 2 Nov 2006 13:56:04 +0100 Subject: [PATCH] Remove occurences of PPC_MULTIPLATFORM in head_64.S Since iSeries is merged to MULTIPLATFORM, there is no way to build a 64bit kernel without MULTIPLATFORM, so PPC_MULTIPLATFORM can be removed in 64bit-only files. Signed-off-by: Sascha Hauer Acked-by: Benjamin Herrenschmidt Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/entry_64.S | 4 ---- arch/powerpc/kernel/head_64.S | 11 ----------- 2 files changed, 15 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/kernel/entry_64.S b/arch/powerpc/kernel/entry_64.S index 86e2bdd5afd..ec754c92ba9 100644 --- a/arch/powerpc/kernel/entry_64.S +++ b/arch/powerpc/kernel/entry_64.S @@ -736,8 +736,6 @@ _STATIC(rtas_restore_regs) #endif /* CONFIG_PPC_RTAS */ -#ifdef CONFIG_PPC_MULTIPLATFORM - _GLOBAL(enter_prom) mflr r0 std r0,16(r1) @@ -822,5 +820,3 @@ _GLOBAL(enter_prom) ld r0,16(r1) mtlr r0 blr - -#endif /* CONFIG_PPC_MULTIPLATFORM */ diff --git a/arch/powerpc/kernel/head_64.S b/arch/powerpc/kernel/head_64.S index d2890050b7e..76d1c81afe5 100644 --- a/arch/powerpc/kernel/head_64.S +++ b/arch/powerpc/kernel/head_64.S @@ -72,13 +72,11 @@ .text .globl _stext _stext: -#ifdef CONFIG_PPC_MULTIPLATFORM _GLOBAL(__start) /* NOP this out unconditionally */ BEGIN_FTR_SECTION b .__start_initialization_multiplatform END_FTR_SECTION(0, 1) -#endif /* CONFIG_PPC_MULTIPLATFORM */ /* Catch branch to 0 in real mode */ trap @@ -1643,7 +1641,6 @@ _STATIC(__start_initialization_iSeries) b .start_here_common #endif /* CONFIG_PPC_ISERIES */ -#ifdef CONFIG_PPC_MULTIPLATFORM _STATIC(__mmu_off) mfmsr r3 @@ -1669,13 +1666,11 @@ _STATIC(__mmu_off) * */ _GLOBAL(__start_initialization_multiplatform) -#ifdef CONFIG_PPC_MULTIPLATFORM /* * Are we booted from a PROM Of-type client-interface ? */ cmpldi cr0,r5,0 bne .__boot_from_prom /* yes -> prom */ -#endif /* Save parameters */ mr r31,r3 @@ -1702,7 +1697,6 @@ _GLOBAL(__start_initialization_multiplatform) bl .__mmu_off b .__after_prom_start -#ifdef CONFIG_PPC_MULTIPLATFORM _STATIC(__boot_from_prom) /* Save parameters */ mr r31,r3 @@ -1742,7 +1736,6 @@ _STATIC(__boot_from_prom) bl .prom_init /* We never return */ trap -#endif /* * At this point, r3 contains the physical address we are running at, @@ -1798,8 +1791,6 @@ _STATIC(__after_prom_start) bl .copy_and_flush /* copy the rest */ b .start_here_multiplatform -#endif /* CONFIG_PPC_MULTIPLATFORM */ - /* * Copy routine used to copy the kernel to start at physical address 0 * and flush and invalidate the caches as needed. @@ -1964,7 +1955,6 @@ _GLOBAL(enable_64b_mode) isync blr -#ifdef CONFIG_PPC_MULTIPLATFORM /* * This is where the main kernel code starts. */ @@ -2035,7 +2025,6 @@ _STATIC(start_here_multiplatform) mtspr SPRN_SRR1,r4 rfid b . /* prevent speculative execution */ -#endif /* CONFIG_PPC_MULTIPLATFORM */ /* This is where all platforms converge execution */ _STATIC(start_here_common) -- cgit v1.2.3-70-g09d2 From 99a565bab1a41819b9f85c8c069a2f3fc6e27d55 Mon Sep 17 00:00:00 2001 From: "s.hauer@pengutronix.de" Date: Thu, 2 Nov 2006 13:56:06 +0100 Subject: [PATCH] Remove occurences of PPC_MULTIPLATFORM in pci_64.c Since iSeries is merged to MULTIPLATFORM, there is no way to build a 64bit kernel without MULTIPLATFORM, so PPC_MULTIPLATFORM can be removed in 64bit-only files. Signed-off-by: Sascha Hauer Acked-by: Benjamin Herrenschmidt Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/pci_64.c | 14 ++------------ 1 file changed, 2 insertions(+), 12 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/kernel/pci_64.c b/arch/powerpc/kernel/pci_64.c index 9bae8a5bf67..80ae9ea15cd 100644 --- a/arch/powerpc/kernel/pci_64.c +++ b/arch/powerpc/kernel/pci_64.c @@ -42,11 +42,9 @@ unsigned long pci_probe_only = 1; int pci_assign_all_buses = 0; -#ifdef CONFIG_PPC_MULTIPLATFORM static void fixup_resource(struct resource *res, struct pci_dev *dev); static void do_bus_setup(struct pci_bus *bus); static void phbs_remap_io(void); -#endif /* pci_io_base -- the base address from which io bars are offsets. * This is the lowest I/O base address (so bar values are always positive), @@ -251,7 +249,6 @@ static void __init pcibios_claim_of_setup(void) pcibios_claim_one_bus(b); } -#ifdef CONFIG_PPC_MULTIPLATFORM static u32 get_int_prop(struct device_node *np, const char *name, u32 def) { const u32 *prop; @@ -506,7 +503,6 @@ void __devinit of_scan_pci_bridge(struct device_node *node, pci_scan_child_bus(bus); } EXPORT_SYMBOL(of_scan_pci_bridge); -#endif /* CONFIG_PPC_MULTIPLATFORM */ void __devinit scan_phb(struct pci_controller *hose) { @@ -540,7 +536,7 @@ void __devinit scan_phb(struct pci_controller *hose) } mode = PCI_PROBE_NORMAL; -#ifdef CONFIG_PPC_MULTIPLATFORM + if (node && ppc_md.pci_probe_mode) mode = ppc_md.pci_probe_mode(bus); DBG(" probe mode: %d\n", mode); @@ -548,7 +544,7 @@ void __devinit scan_phb(struct pci_controller *hose) bus->subordinate = hose->last_busno; of_scan_bus(node, bus); } -#endif /* CONFIG_PPC_MULTIPLATFORM */ + if (mode == PCI_PROBE_NORMAL) hose->last_busno = bus->subordinate = pci_scan_child_bus(bus); } @@ -592,11 +588,9 @@ static int __init pcibios_init(void) if (ppc64_isabridge_dev != NULL) printk(KERN_DEBUG "ISA bridge at %s\n", pci_name(ppc64_isabridge_dev)); -#ifdef CONFIG_PPC_MULTIPLATFORM if (!firmware_has_feature(FW_FEATURE_ISERIES)) /* map in PCI I/O space */ phbs_remap_io(); -#endif printk(KERN_DEBUG "PCI: Probing PCI hardware done\n"); @@ -873,8 +867,6 @@ void pcibios_add_platform_entries(struct pci_dev *pdev) device_create_file(&pdev->dev, &dev_attr_devspec); } -#ifdef CONFIG_PPC_MULTIPLATFORM - #define ISA_SPACE_MASK 0x1 #define ISA_SPACE_IO 0x1 @@ -1343,8 +1335,6 @@ struct pci_controller* pci_find_hose_for_OF_device(struct device_node* node) return NULL; } -#endif /* CONFIG_PPC_MULTIPLATFORM */ - unsigned long pci_address_to_pio(phys_addr_t address) { struct pci_controller *hose, *tmp; -- cgit v1.2.3-70-g09d2 From fd6e7d2d6a0231ebfa08e1f9a323497ea548da7d Mon Sep 17 00:00:00 2001 From: "s.hauer@pengutronix.de" Date: Thu, 2 Nov 2006 13:56:10 +0100 Subject: [PATCH] Clean up usage of boot_dev dev_t boot_dev is declared in arch/powerpc/kernel/setup_32.c and in arch/powerpc/kernel/setup_64.c but not used in these files. It is only used in arch/powerpc/platforms/powermac/setup.c, so make it static in this file. Signed-off-by: Sascha Hauer Acked-by: Benjamin Herrenschmidt Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/setup_32.c | 4 ---- arch/powerpc/kernel/setup_64.c | 1 - arch/powerpc/platforms/powermac/setup.c | 2 +- 3 files changed, 1 insertion(+), 6 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/kernel/setup_32.c b/arch/powerpc/kernel/setup_32.c index 191d0ab0922..517ed1b1b16 100644 --- a/arch/powerpc/kernel/setup_32.c +++ b/arch/powerpc/kernel/setup_32.c @@ -63,10 +63,6 @@ unsigned int DMA_MODE_WRITE; int have_of = 1; -#ifdef CONFIG_PPC_MULTIPLATFORM -dev_t boot_dev; -#endif /* CONFIG_PPC_MULTIPLATFORM */ - #ifdef CONFIG_VGA_CONSOLE unsigned long vgacon_remap_base; #endif diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c index b1b0cda3f74..ae6b67ce54e 100644 --- a/arch/powerpc/kernel/setup_64.c +++ b/arch/powerpc/kernel/setup_64.c @@ -71,7 +71,6 @@ int have_of = 1; int boot_cpuid = 0; -dev_t boot_dev; u64 ppc64_pft_size; /* Pick defaults since we might want to patch instructions diff --git a/arch/powerpc/platforms/powermac/setup.c b/arch/powerpc/platforms/powermac/setup.c index 824a618396a..cb1c342061e 100644 --- a/arch/powerpc/platforms/powermac/setup.c +++ b/arch/powerpc/platforms/powermac/setup.c @@ -361,7 +361,7 @@ char *bootdevice; void *boot_host; int boot_target; int boot_part; -extern dev_t boot_dev; +static dev_t boot_dev; #ifdef CONFIG_SCSI void __init note_scsi_host(struct device_node *node, void *host) -- cgit v1.2.3-70-g09d2 From 2fcd34291b650723091a06e4b51b546961f308a3 Mon Sep 17 00:00:00 2001 From: "s.hauer@pengutronix.de" Date: Thu, 2 Nov 2006 13:56:11 +0100 Subject: [PATCH] Make nvram_64.o a 64bit-only object Make nvram_64.o dependent on 64bit, not on MULTIPLATFORM. Signed-off-by: Sascha Hauer Acked-by: Benjamin Herrenschmidt Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/Makefile | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile index 8b133afbdc2..82c223852e6 100644 --- a/arch/powerpc/kernel/Makefile +++ b/arch/powerpc/kernel/Makefile @@ -17,7 +17,7 @@ obj-y += vdso32/ obj-$(CONFIG_PPC64) += setup_64.o binfmt_elf32.o sys_ppc32.o \ signal_64.o ptrace32.o \ paca.o cpu_setup_ppc970.o \ - firmware.o sysfs.o + firmware.o sysfs.o nvram_64.o obj-$(CONFIG_PPC64) += vdso64/ obj-$(CONFIG_ALTIVEC) += vecemu.o vector.o obj-$(CONFIG_PPC_970_NAP) += idle_power4.o @@ -32,7 +32,6 @@ obj-$(CONFIG_LPARCFG) += lparcfg.o obj-$(CONFIG_IBMVIO) += vio.o obj-$(CONFIG_IBMEBUS) += ibmebus.o obj-$(CONFIG_GENERIC_TBSYNC) += smp-tbsync.o -obj64-$(CONFIG_PPC_MULTIPLATFORM) += nvram_64.o obj-$(CONFIG_CRASH_DUMP) += crash_dump.o obj-$(CONFIG_6xx) += idle_6xx.o l2cr_6xx.o cpu_setup_6xx.o obj-$(CONFIG_TAU) += tau_6xx.o -- cgit v1.2.3-70-g09d2 From 0f6c95dcabdaa8fdc95b125582bd12625adfbde6 Mon Sep 17 00:00:00 2001 From: Nicolas DET Date: Wed, 8 Nov 2006 17:14:43 +0100 Subject: [PATCH] Add MPC5200 Interrupt Controller support. This adds support for the MPC52xx Interrupt controller for ARCH=powerpc. It includes the main code in arch/powerpc/sysdev/ as well as a header file in include/asm-powerpc. Signed-off-by: Nicolas DET Acked-by: Sylvain Munaut Acked-by: Grant Likely Signed-off-by: Paul Mackerras --- arch/powerpc/sysdev/Makefile | 1 + arch/powerpc/sysdev/mpc52xx_pic.c | 538 ++++++++++++++++++++++++++++++++++++++ include/asm-powerpc/mpc52xx.h | 287 ++++++++++++++++++++ 3 files changed, 826 insertions(+) create mode 100644 arch/powerpc/sysdev/mpc52xx_pic.c create mode 100644 include/asm-powerpc/mpc52xx.h (limited to 'arch/powerpc') diff --git a/arch/powerpc/sysdev/Makefile b/arch/powerpc/sysdev/Makefile index f15af0e82f1..5b87f7b42a1 100644 --- a/arch/powerpc/sysdev/Makefile +++ b/arch/powerpc/sysdev/Makefile @@ -12,6 +12,7 @@ obj-$(CONFIG_MMIO_NVRAM) += mmio_nvram.o obj-$(CONFIG_FSL_SOC) += fsl_soc.o obj-$(CONFIG_TSI108_BRIDGE) += tsi108_pci.o tsi108_dev.o obj-$(CONFIG_QUICC_ENGINE) += qe_lib/ +obj-$(CONFIG_PPC_MPC52xx) += mpc52xx_pic.o ifeq ($(CONFIG_PPC_MERGE),y) obj-$(CONFIG_PPC_I8259) += i8259.o diff --git a/arch/powerpc/sysdev/mpc52xx_pic.c b/arch/powerpc/sysdev/mpc52xx_pic.c new file mode 100644 index 00000000000..6df51f04b8f --- /dev/null +++ b/arch/powerpc/sysdev/mpc52xx_pic.c @@ -0,0 +1,538 @@ +/* + * + * Programmable Interrupt Controller functions for the Freescale MPC52xx. + * + * Copyright (C) 2006 bplan GmbH + * + * Based on the code from the 2.4 kernel by + * Dale Farnsworth and Kent Borg. + * + * Copyright (C) 2004 Sylvain Munaut + * Copyright (C) 2003 Montavista Software, Inc + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + * + */ + +#undef DEBUG + +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include + +/* + * +*/ + +static struct mpc52xx_intr __iomem *intr; +static struct mpc52xx_sdma __iomem *sdma; +static struct irq_host *mpc52xx_irqhost = NULL; + +static unsigned char mpc52xx_map_senses[4] = { + IRQ_TYPE_LEVEL_HIGH, + IRQ_TYPE_EDGE_RISING, + IRQ_TYPE_EDGE_FALLING, + IRQ_TYPE_LEVEL_LOW, +}; + +/* + * +*/ + +static inline void io_be_setbit(u32 __iomem * addr, int bitno) +{ + out_be32(addr, in_be32(addr) | (1 << bitno)); +} + +static inline void io_be_clrbit(u32 __iomem * addr, int bitno) +{ + out_be32(addr, in_be32(addr) & ~(1 << bitno)); +} + +/* + * IRQ[0-3] interrupt irq_chip +*/ + +static void mpc52xx_extirq_mask(unsigned int virq) +{ + int irq; + int l2irq; + + irq = irq_map[virq].hwirq; + l2irq = (irq & MPC52xx_IRQ_L2_MASK) >> MPC52xx_IRQ_L2_OFFSET; + + pr_debug("%s: irq=%x. l2=%d\n", __func__, irq, l2irq); + + io_be_clrbit(&intr->ctrl, 11 - l2irq); +} + +static void mpc52xx_extirq_unmask(unsigned int virq) +{ + int irq; + int l2irq; + + irq = irq_map[virq].hwirq; + l2irq = (irq & MPC52xx_IRQ_L2_MASK) >> MPC52xx_IRQ_L2_OFFSET; + + pr_debug("%s: irq=%x. l2=%d\n", __func__, irq, l2irq); + + io_be_setbit(&intr->ctrl, 11 - l2irq); +} + +static void mpc52xx_extirq_ack(unsigned int virq) +{ + int irq; + int l2irq; + + irq = irq_map[virq].hwirq; + l2irq = (irq & MPC52xx_IRQ_L2_MASK) >> MPC52xx_IRQ_L2_OFFSET; + + pr_debug("%s: irq=%x. l2=%d\n", __func__, irq, l2irq); + + io_be_setbit(&intr->ctrl, 27 - l2irq); +} + +static struct irq_chip mpc52xx_extirq_irqchip = { + .typename = " MPC52xx IRQ[0-3] ", + .mask = mpc52xx_extirq_mask, + .unmask = mpc52xx_extirq_unmask, + .ack = mpc52xx_extirq_ack, +}; + +/* + * Main interrupt irq_chip +*/ + +static void mpc52xx_main_mask(unsigned int virq) +{ + int irq; + int l2irq; + + irq = irq_map[virq].hwirq; + l2irq = (irq & MPC52xx_IRQ_L2_MASK) >> MPC52xx_IRQ_L2_OFFSET; + + pr_debug("%s: irq=%x. l2=%d\n", __func__, irq, l2irq); + + io_be_setbit(&intr->main_mask, 15 - l2irq); +} + +static void mpc52xx_main_unmask(unsigned int virq) +{ + int irq; + int l2irq; + + irq = irq_map[virq].hwirq; + l2irq = (irq & MPC52xx_IRQ_L2_MASK) >> MPC52xx_IRQ_L2_OFFSET; + + pr_debug("%s: irq=%x. l2=%d\n", __func__, irq, l2irq); + + io_be_clrbit(&intr->main_mask, 15 - l2irq); +} + +static struct irq_chip mpc52xx_main_irqchip = { + .typename = "MPC52xx Main", + .mask = mpc52xx_main_mask, + .mask_ack = mpc52xx_main_mask, + .unmask = mpc52xx_main_unmask, +}; + +/* + * Peripherals interrupt irq_chip +*/ + +static void mpc52xx_periph_mask(unsigned int virq) +{ + int irq; + int l2irq; + + irq = irq_map[virq].hwirq; + l2irq = (irq & MPC52xx_IRQ_L2_MASK) >> MPC52xx_IRQ_L2_OFFSET; + + pr_debug("%s: irq=%x. l2=%d\n", __func__, irq, l2irq); + + io_be_setbit(&intr->per_mask, 31 - l2irq); +} + +static void mpc52xx_periph_unmask(unsigned int virq) +{ + int irq; + int l2irq; + + irq = irq_map[virq].hwirq; + l2irq = (irq & MPC52xx_IRQ_L2_MASK) >> MPC52xx_IRQ_L2_OFFSET; + + pr_debug("%s: irq=%x. l2=%d\n", __func__, irq, l2irq); + + io_be_clrbit(&intr->per_mask, 31 - l2irq); +} + +static struct irq_chip mpc52xx_periph_irqchip = { + .typename = "MPC52xx Peripherals", + .mask = mpc52xx_periph_mask, + .mask_ack = mpc52xx_periph_mask, + .unmask = mpc52xx_periph_unmask, +}; + +/* + * SDMA interrupt irq_chip +*/ + +static void mpc52xx_sdma_mask(unsigned int virq) +{ + int irq; + int l2irq; + + irq = irq_map[virq].hwirq; + l2irq = (irq & MPC52xx_IRQ_L2_MASK) >> MPC52xx_IRQ_L2_OFFSET; + + pr_debug("%s: irq=%x. l2=%d\n", __func__, irq, l2irq); + + io_be_setbit(&sdma->IntMask, l2irq); +} + +static void mpc52xx_sdma_unmask(unsigned int virq) +{ + int irq; + int l2irq; + + irq = irq_map[virq].hwirq; + l2irq = (irq & MPC52xx_IRQ_L2_MASK) >> MPC52xx_IRQ_L2_OFFSET; + + pr_debug("%s: irq=%x. l2=%d\n", __func__, irq, l2irq); + + io_be_clrbit(&sdma->IntMask, l2irq); +} + +static void mpc52xx_sdma_ack(unsigned int virq) +{ + int irq; + int l2irq; + + irq = irq_map[virq].hwirq; + l2irq = (irq & MPC52xx_IRQ_L2_MASK) >> MPC52xx_IRQ_L2_OFFSET; + + pr_debug("%s: irq=%x. l2=%d\n", __func__, irq, l2irq); + + out_be32(&sdma->IntPend, 1 << l2irq); +} + +static struct irq_chip mpc52xx_sdma_irqchip = { + .typename = "MPC52xx SDMA", + .mask = mpc52xx_sdma_mask, + .unmask = mpc52xx_sdma_unmask, + .ack = mpc52xx_sdma_ack, +}; + +/* + * irq_host +*/ + +static int mpc52xx_irqhost_match(struct irq_host *h, struct device_node *node) +{ + pr_debug("%s: node=%p\n", __func__, node); + return mpc52xx_irqhost->host_data == node; +} + +static int mpc52xx_irqhost_xlate(struct irq_host *h, struct device_node *ct, + u32 * intspec, unsigned int intsize, + irq_hw_number_t * out_hwirq, + unsigned int *out_flags) +{ + int intrvect_l1; + int intrvect_l2; + int intrvect_type; + int intrvect_linux; + + if (intsize != 3) + return -1; + + intrvect_l1 = (int)intspec[0]; + intrvect_l2 = (int)intspec[1]; + intrvect_type = (int)intspec[2]; + + intrvect_linux = + (intrvect_l1 << MPC52xx_IRQ_L1_OFFSET) & MPC52xx_IRQ_L1_MASK; + intrvect_linux |= + (intrvect_l2 << MPC52xx_IRQ_L2_OFFSET) & MPC52xx_IRQ_L2_MASK; + + pr_debug("return %x, l1=%d, l2=%d\n", intrvect_linux, intrvect_l1, + intrvect_l2); + + *out_hwirq = intrvect_linux; + *out_flags = mpc52xx_map_senses[intrvect_type]; + + return 0; +} + +/* + * this function retrieves the correct IRQ type out + * of the MPC regs + * Only externals IRQs needs this +*/ +static int mpc52xx_irqx_gettype(int irq) +{ + int type; + u32 ctrl_reg; + + ctrl_reg = in_be32(&intr->ctrl); + type = (ctrl_reg >> (22 - irq * 2)) & 0x3; + + return mpc52xx_map_senses[type]; +} + +static int mpc52xx_irqhost_map(struct irq_host *h, unsigned int virq, + irq_hw_number_t irq) +{ + int l1irq; + int l2irq; + struct irq_chip *good_irqchip; + void *good_handle; + int type; + + l1irq = (irq & MPC52xx_IRQ_L1_MASK) >> MPC52xx_IRQ_L1_OFFSET; + l2irq = (irq & MPC52xx_IRQ_L2_MASK) >> MPC52xx_IRQ_L2_OFFSET; + + /* + * Most of ours IRQs will be level low + * Only external IRQs on some platform may be others + */ + type = IRQ_TYPE_LEVEL_LOW; + + switch (l1irq) { + case MPC52xx_IRQ_L1_CRIT: + pr_debug("%s: Critical. l2=%x\n", __func__, l2irq); + + BUG_ON(l2irq != 0); + + type = mpc52xx_irqx_gettype(l2irq); + good_irqchip = &mpc52xx_extirq_irqchip; + break; + + case MPC52xx_IRQ_L1_MAIN: + pr_debug("%s: Main IRQ[1-3] l2=%x\n", __func__, l2irq); + + if ((l2irq >= 1) && (l2irq <= 3)) { + type = mpc52xx_irqx_gettype(l2irq); + good_irqchip = &mpc52xx_extirq_irqchip; + } else { + good_irqchip = &mpc52xx_main_irqchip; + } + break; + + case MPC52xx_IRQ_L1_PERP: + pr_debug("%s: Peripherals. l2=%x\n", __func__, l2irq); + good_irqchip = &mpc52xx_periph_irqchip; + break; + + case MPC52xx_IRQ_L1_SDMA: + pr_debug("%s: SDMA. l2=%x\n", __func__, l2irq); + good_irqchip = &mpc52xx_sdma_irqchip; + break; + + default: + pr_debug("%s: Error, unknown L1 IRQ (0x%x)\n", __func__, l1irq); + printk(KERN_ERR "Unknow IRQ!\n"); + return -EINVAL; + } + + switch (type) { + case IRQ_TYPE_EDGE_FALLING: + case IRQ_TYPE_EDGE_RISING: + good_handle = handle_edge_irq; + break; + default: + good_handle = handle_level_irq; + } + + set_irq_chip_and_handler(virq, good_irqchip, good_handle); + + pr_debug("%s: virq=%x, hw=%x. type=%x\n", __func__, virq, + (int)irq, type); + + return 0; +} + +static struct irq_host_ops mpc52xx_irqhost_ops = { + .match = mpc52xx_irqhost_match, + .xlate = mpc52xx_irqhost_xlate, + .map = mpc52xx_irqhost_map, +}; + +/* + * init (public) +*/ + +void __init mpc52xx_init_irq(void) +{ + struct device_node *picnode = NULL; + int picnode_regsize; + u32 picnode_regoffset; + + struct device_node *sdmanode = NULL; + int sdmanode_regsize; + u32 sdmanode_regoffset; + + u64 size64; + int flags; + + u32 intr_ctrl; + + picnode = of_find_compatible_node(NULL, "interrupt-controller", + "mpc5200-pic"); + if (picnode == NULL) { + printk(KERN_ERR "MPC52xx PIC: " + "Unable to find the interrupt controller " + "in the OpenFirmware device tree\n"); + goto end; + } + + sdmanode = of_find_compatible_node(NULL, "dma-controller", + "mpc5200-bestcomm"); + if (sdmanode == NULL) { + printk(KERN_ERR "MPC52xx PIC" + "Unable to find the Bestcomm DMA controller device " + "in the OpenFirmware device tree\n"); + goto end; + } + + /* Retrieve PIC ressources */ + picnode_regoffset = (u32) of_get_address(picnode, 0, &size64, &flags); + if (picnode_regoffset == 0) { + printk(KERN_ERR "MPC52xx PIC" + "Unable to get the interrupt controller address\n"); + goto end; + } + + picnode_regoffset = + of_translate_address(picnode, (u32 *) picnode_regoffset); + picnode_regsize = (int)size64; + + /* Retrieve SDMA ressources */ + sdmanode_regoffset = (u32) of_get_address(sdmanode, 0, &size64, &flags); + if (sdmanode_regoffset == 0) { + printk(KERN_ERR "MPC52xx PIC: " + "Unable to get the Bestcomm DMA controller address\n"); + goto end; + } + + sdmanode_regoffset = + of_translate_address(sdmanode, (u32 *) sdmanode_regoffset); + sdmanode_regsize = (int)size64; + + /* Remap the necessary zones */ + intr = ioremap(picnode_regoffset, picnode_regsize); + if (intr == NULL) { + printk(KERN_ERR "MPC52xx PIC: " + "Unable to ioremap interrupt controller registers!\n"); + goto end; + } + + sdma = ioremap(sdmanode_regoffset, sdmanode_regsize); + if (sdma == NULL) { + iounmap(intr); + printk(KERN_ERR "MPC52xx PIC: " + "Unable to ioremap Bestcomm DMA registers!\n"); + goto end; + } + + printk(KERN_INFO "MPC52xx PIC: MPC52xx PIC Remapped at 0x%8.8x\n", + picnode_regoffset); + printk(KERN_INFO "MPC52xx PIC: MPC52xx SDMA Remapped at 0x%8.8x\n", + sdmanode_regoffset); + + /* Disable all interrupt sources. */ + out_be32(&sdma->IntPend, 0xffffffff); /* 1 means clear pending */ + out_be32(&sdma->IntMask, 0xffffffff); /* 1 means disabled */ + out_be32(&intr->per_mask, 0x7ffffc00); /* 1 means disabled */ + out_be32(&intr->main_mask, 0x00010fff); /* 1 means disabled */ + intr_ctrl = in_be32(&intr->ctrl); + intr_ctrl &= 0x00ff0000; /* Keeps IRQ[0-3] config */ + intr_ctrl |= 0x0f000000 | /* clear IRQ 0-3 */ + 0x00001000 | /* MEE master external enable */ + 0x00000000 | /* 0 means disable IRQ 0-3 */ + 0x00000001; /* CEb route critical normally */ + out_be32(&intr->ctrl, intr_ctrl); + + /* Zero a bunch of the priority settings. */ + out_be32(&intr->per_pri1, 0); + out_be32(&intr->per_pri2, 0); + out_be32(&intr->per_pri3, 0); + out_be32(&intr->main_pri1, 0); + out_be32(&intr->main_pri2, 0); + + /* + * As last step, add an irq host to translate the real + * hw irq information provided by the ofw to linux virq + */ + + mpc52xx_irqhost = + irq_alloc_host(IRQ_HOST_MAP_LINEAR, MPC52xx_IRQ_HIGHTESTHWIRQ, + &mpc52xx_irqhost_ops, -1); + + if (mpc52xx_irqhost) { + mpc52xx_irqhost->host_data = picnode; + printk(KERN_INFO "MPC52xx PIC is up and running!\n"); + } else { + printk(KERN_ERR + "MPC52xx PIC: Unable to allocate the IRQ host\n"); + } + +end: + of_node_put(picnode); + of_node_put(sdmanode); +} + +/* + * get_irq (public) +*/ +unsigned int mpc52xx_get_irq(void) +{ + u32 status; + int irq = NO_IRQ_IGNORE; + + status = in_be32(&intr->enc_status); + if (status & 0x00000400) { /* critical */ + irq = (status >> 8) & 0x3; + if (irq == 2) /* high priority peripheral */ + goto peripheral; + irq |= (MPC52xx_IRQ_L1_CRIT << MPC52xx_IRQ_L1_OFFSET) & + MPC52xx_IRQ_L1_MASK; + } else if (status & 0x00200000) { /* main */ + irq = (status >> 16) & 0x1f; + if (irq == 4) /* low priority peripheral */ + goto peripheral; + irq |= (MPC52xx_IRQ_L1_MAIN << MPC52xx_IRQ_L1_OFFSET) & + MPC52xx_IRQ_L1_MASK; + } else if (status & 0x20000000) { /* peripheral */ + peripheral: + irq = (status >> 24) & 0x1f; + if (irq == 0) { /* bestcomm */ + status = in_be32(&sdma->IntPend); + irq = ffs(status) - 1; + irq |= (MPC52xx_IRQ_L1_SDMA << MPC52xx_IRQ_L1_OFFSET) & + MPC52xx_IRQ_L1_MASK; + } else + irq |= (MPC52xx_IRQ_L1_PERP << MPC52xx_IRQ_L1_OFFSET) & + MPC52xx_IRQ_L1_MASK; + } + + pr_debug("%s: irq=%x. virq=%d\n", __func__, irq, + irq_linear_revmap(mpc52xx_irqhost, irq)); + + return irq_linear_revmap(mpc52xx_irqhost, irq); +} + diff --git a/include/asm-powerpc/mpc52xx.h b/include/asm-powerpc/mpc52xx.h new file mode 100644 index 00000000000..e9aa622f19f --- /dev/null +++ b/include/asm-powerpc/mpc52xx.h @@ -0,0 +1,287 @@ +/* + * Prototypes, etc. for the Freescale MPC52xx embedded cpu chips + * May need to be cleaned as the port goes on ... + * + * Copyright (C) 2004-2005 Sylvain Munaut + * Copyright (C) 2003 MontaVista, Software, Inc. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +#ifndef __ASM_POWERPC_MPC52xx_H__ +#define __ASM_POWERPC_MPC52xx_H__ + +#ifndef __ASSEMBLY__ +#include +#include +#endif /* __ASSEMBLY__ */ + + +/* ======================================================================== */ +/* HW IRQ mapping */ +/* ======================================================================== */ + +#define MPC52xx_IRQ_L1_CRIT (0) +#define MPC52xx_IRQ_L1_MAIN (1) +#define MPC52xx_IRQ_L1_PERP (2) +#define MPC52xx_IRQ_L1_SDMA (3) + +#define MPC52xx_IRQ_L1_OFFSET (6) +#define MPC52xx_IRQ_L1_MASK (0xc0) + +#define MPC52xx_IRQ_L2_OFFSET (0) +#define MPC52xx_IRQ_L2_MASK (0x3f) + +#define MPC52xx_IRQ_HIGHTESTHWIRQ (0xd0) + + +/* ======================================================================== */ +/* Structures mapping of some unit register set */ +/* ======================================================================== */ + +#ifndef __ASSEMBLY__ + +/* Interrupt controller Register set */ +struct mpc52xx_intr { + u32 per_mask; /* INTR + 0x00 */ + u32 per_pri1; /* INTR + 0x04 */ + u32 per_pri2; /* INTR + 0x08 */ + u32 per_pri3; /* INTR + 0x0c */ + u32 ctrl; /* INTR + 0x10 */ + u32 main_mask; /* INTR + 0x14 */ + u32 main_pri1; /* INTR + 0x18 */ + u32 main_pri2; /* INTR + 0x1c */ + u32 reserved1; /* INTR + 0x20 */ + u32 enc_status; /* INTR + 0x24 */ + u32 crit_status; /* INTR + 0x28 */ + u32 main_status; /* INTR + 0x2c */ + u32 per_status; /* INTR + 0x30 */ + u32 reserved2; /* INTR + 0x34 */ + u32 per_error; /* INTR + 0x38 */ +}; + +/* Memory Mapping Control */ +struct mpc52xx_mmap_ctl { + u32 mbar; /* MMAP_CTRL + 0x00 */ + + u32 cs0_start; /* MMAP_CTRL + 0x04 */ + u32 cs0_stop; /* MMAP_CTRL + 0x08 */ + u32 cs1_start; /* MMAP_CTRL + 0x0c */ + u32 cs1_stop; /* MMAP_CTRL + 0x10 */ + u32 cs2_start; /* MMAP_CTRL + 0x14 */ + u32 cs2_stop; /* MMAP_CTRL + 0x18 */ + u32 cs3_start; /* MMAP_CTRL + 0x1c */ + u32 cs3_stop; /* MMAP_CTRL + 0x20 */ + u32 cs4_start; /* MMAP_CTRL + 0x24 */ + u32 cs4_stop; /* MMAP_CTRL + 0x28 */ + u32 cs5_start; /* MMAP_CTRL + 0x2c */ + u32 cs5_stop; /* MMAP_CTRL + 0x30 */ + + u32 sdram0; /* MMAP_CTRL + 0x34 */ + u32 sdram1; /* MMAP_CTRL + 0X38 */ + + u32 reserved[4]; /* MMAP_CTRL + 0x3c .. 0x48 */ + + u32 boot_start; /* MMAP_CTRL + 0x4c */ + u32 boot_stop; /* MMAP_CTRL + 0x50 */ + + u32 ipbi_ws_ctrl; /* MMAP_CTRL + 0x54 */ + + u32 cs6_start; /* MMAP_CTRL + 0x58 */ + u32 cs6_stop; /* MMAP_CTRL + 0x5c */ + u32 cs7_start; /* MMAP_CTRL + 0x60 */ + u32 cs7_stop; /* MMAP_CTRL + 0x64 */ +}; + +/* SDRAM control */ +struct mpc52xx_sdram { + u32 mode; /* SDRAM + 0x00 */ + u32 ctrl; /* SDRAM + 0x04 */ + u32 config1; /* SDRAM + 0x08 */ + u32 config2; /* SDRAM + 0x0c */ +}; + +/* SDMA */ +struct mpc52xx_sdma { + u32 taskBar; /* SDMA + 0x00 */ + u32 currentPointer; /* SDMA + 0x04 */ + u32 endPointer; /* SDMA + 0x08 */ + u32 variablePointer; /* SDMA + 0x0c */ + + u8 IntVect1; /* SDMA + 0x10 */ + u8 IntVect2; /* SDMA + 0x11 */ + u16 PtdCntrl; /* SDMA + 0x12 */ + + u32 IntPend; /* SDMA + 0x14 */ + u32 IntMask; /* SDMA + 0x18 */ + + u16 tcr[16]; /* SDMA + 0x1c .. 0x3a */ + + u8 ipr[32]; /* SDMA + 0x3c .. 0x5b */ + + u32 cReqSelect; /* SDMA + 0x5c */ + u32 task_size0; /* SDMA + 0x60 */ + u32 task_size1; /* SDMA + 0x64 */ + u32 MDEDebug; /* SDMA + 0x68 */ + u32 ADSDebug; /* SDMA + 0x6c */ + u32 Value1; /* SDMA + 0x70 */ + u32 Value2; /* SDMA + 0x74 */ + u32 Control; /* SDMA + 0x78 */ + u32 Status; /* SDMA + 0x7c */ + u32 PTDDebug; /* SDMA + 0x80 */ +}; + +/* GPT */ +struct mpc52xx_gpt { + u32 mode; /* GPTx + 0x00 */ + u32 count; /* GPTx + 0x04 */ + u32 pwm; /* GPTx + 0x08 */ + u32 status; /* GPTx + 0X0c */ +}; + +/* GPIO */ +struct mpc52xx_gpio { + u32 port_config; /* GPIO + 0x00 */ + u32 simple_gpioe; /* GPIO + 0x04 */ + u32 simple_ode; /* GPIO + 0x08 */ + u32 simple_ddr; /* GPIO + 0x0c */ + u32 simple_dvo; /* GPIO + 0x10 */ + u32 simple_ival; /* GPIO + 0x14 */ + u8 outo_gpioe; /* GPIO + 0x18 */ + u8 reserved1[3]; /* GPIO + 0x19 */ + u8 outo_dvo; /* GPIO + 0x1c */ + u8 reserved2[3]; /* GPIO + 0x1d */ + u8 sint_gpioe; /* GPIO + 0x20 */ + u8 reserved3[3]; /* GPIO + 0x21 */ + u8 sint_ode; /* GPIO + 0x24 */ + u8 reserved4[3]; /* GPIO + 0x25 */ + u8 sint_ddr; /* GPIO + 0x28 */ + u8 reserved5[3]; /* GPIO + 0x29 */ + u8 sint_dvo; /* GPIO + 0x2c */ + u8 reserved6[3]; /* GPIO + 0x2d */ + u8 sint_inten; /* GPIO + 0x30 */ + u8 reserved7[3]; /* GPIO + 0x31 */ + u16 sint_itype; /* GPIO + 0x34 */ + u16 reserved8; /* GPIO + 0x36 */ + u8 gpio_control; /* GPIO + 0x38 */ + u8 reserved9[3]; /* GPIO + 0x39 */ + u8 sint_istat; /* GPIO + 0x3c */ + u8 sint_ival; /* GPIO + 0x3d */ + u8 bus_errs; /* GPIO + 0x3e */ + u8 reserved10; /* GPIO + 0x3f */ +}; + +#define MPC52xx_GPIO_PSC_CONFIG_UART_WITHOUT_CD 4 +#define MPC52xx_GPIO_PSC_CONFIG_UART_WITH_CD 5 +#define MPC52xx_GPIO_PCI_DIS (1<<15) + +/* GPIO with WakeUp*/ +struct mpc52xx_gpio_wkup { + u8 wkup_gpioe; /* GPIO_WKUP + 0x00 */ + u8 reserved1[3]; /* GPIO_WKUP + 0x03 */ + u8 wkup_ode; /* GPIO_WKUP + 0x04 */ + u8 reserved2[3]; /* GPIO_WKUP + 0x05 */ + u8 wkup_ddr; /* GPIO_WKUP + 0x08 */ + u8 reserved3[3]; /* GPIO_WKUP + 0x09 */ + u8 wkup_dvo; /* GPIO_WKUP + 0x0C */ + u8 reserved4[3]; /* GPIO_WKUP + 0x0D */ + u8 wkup_inten; /* GPIO_WKUP + 0x10 */ + u8 reserved5[3]; /* GPIO_WKUP + 0x11 */ + u8 wkup_iinten; /* GPIO_WKUP + 0x14 */ + u8 reserved6[3]; /* GPIO_WKUP + 0x15 */ + u16 wkup_itype; /* GPIO_WKUP + 0x18 */ + u8 reserved7[2]; /* GPIO_WKUP + 0x1A */ + u8 wkup_maste; /* GPIO_WKUP + 0x1C */ + u8 reserved8[3]; /* GPIO_WKUP + 0x1D */ + u8 wkup_ival; /* GPIO_WKUP + 0x20 */ + u8 reserved9[3]; /* GPIO_WKUP + 0x21 */ + u8 wkup_istat; /* GPIO_WKUP + 0x24 */ + u8 reserved10[3]; /* GPIO_WKUP + 0x25 */ +}; + +/* XLB Bus control */ +struct mpc52xx_xlb { + u8 reserved[0x40]; + u32 config; /* XLB + 0x40 */ + u32 version; /* XLB + 0x44 */ + u32 status; /* XLB + 0x48 */ + u32 int_enable; /* XLB + 0x4c */ + u32 addr_capture; /* XLB + 0x50 */ + u32 bus_sig_capture; /* XLB + 0x54 */ + u32 addr_timeout; /* XLB + 0x58 */ + u32 data_timeout; /* XLB + 0x5c */ + u32 bus_act_timeout; /* XLB + 0x60 */ + u32 master_pri_enable; /* XLB + 0x64 */ + u32 master_priority; /* XLB + 0x68 */ + u32 base_address; /* XLB + 0x6c */ + u32 snoop_window; /* XLB + 0x70 */ +}; + +#define MPC52xx_XLB_CFG_PLDIS (1 << 31) +#define MPC52xx_XLB_CFG_SNOOP (1 << 15) + +/* Clock Distribution control */ +struct mpc52xx_cdm { + u32 jtag_id; /* CDM + 0x00 reg0 read only */ + u32 rstcfg; /* CDM + 0x04 reg1 read only */ + u32 breadcrumb; /* CDM + 0x08 reg2 */ + + u8 mem_clk_sel; /* CDM + 0x0c reg3 byte0 */ + u8 xlb_clk_sel; /* CDM + 0x0d reg3 byte1 read only */ + u8 ipb_clk_sel; /* CDM + 0x0e reg3 byte2 */ + u8 pci_clk_sel; /* CDM + 0x0f reg3 byte3 */ + + u8 ext_48mhz_en; /* CDM + 0x10 reg4 byte0 */ + u8 fd_enable; /* CDM + 0x11 reg4 byte1 */ + u16 fd_counters; /* CDM + 0x12 reg4 byte2,3 */ + + u32 clk_enables; /* CDM + 0x14 reg5 */ + + u8 osc_disable; /* CDM + 0x18 reg6 byte0 */ + u8 reserved0[3]; /* CDM + 0x19 reg6 byte1,2,3 */ + + u8 ccs_sleep_enable; /* CDM + 0x1c reg7 byte0 */ + u8 osc_sleep_enable; /* CDM + 0x1d reg7 byte1 */ + u8 reserved1; /* CDM + 0x1e reg7 byte2 */ + u8 ccs_qreq_test; /* CDM + 0x1f reg7 byte3 */ + + u8 soft_reset; /* CDM + 0x20 u8 byte0 */ + u8 no_ckstp; /* CDM + 0x21 u8 byte0 */ + u8 reserved2[2]; /* CDM + 0x22 u8 byte1,2,3 */ + + u8 pll_lock; /* CDM + 0x24 reg9 byte0 */ + u8 pll_looselock; /* CDM + 0x25 reg9 byte1 */ + u8 pll_sm_lockwin; /* CDM + 0x26 reg9 byte2 */ + u8 reserved3; /* CDM + 0x27 reg9 byte3 */ + + u16 reserved4; /* CDM + 0x28 reg10 byte0,1 */ + u16 mclken_div_psc1; /* CDM + 0x2a reg10 byte2,3 */ + + u16 reserved5; /* CDM + 0x2c reg11 byte0,1 */ + u16 mclken_div_psc2; /* CDM + 0x2e reg11 byte2,3 */ + + u16 reserved6; /* CDM + 0x30 reg12 byte0,1 */ + u16 mclken_div_psc3; /* CDM + 0x32 reg12 byte2,3 */ + + u16 reserved7; /* CDM + 0x34 reg13 byte0,1 */ + u16 mclken_div_psc6; /* CDM + 0x36 reg13 byte2,3 */ +}; + +#endif /* __ASSEMBLY__ */ + + +/* ========================================================================= */ +/* Prototypes for MPC52xx sysdev */ +/* ========================================================================= */ + +#ifndef __ASSEMBLY__ + +extern void mpc52xx_init_irq(void); +extern unsigned int mpc52xx_get_irq(void); + +#endif /* __ASSEMBLY__ */ + +#endif /* __ASM_POWERPC_MPC52xx_H__ */ + -- cgit v1.2.3-70-g09d2 From c37858d333a50815c74349396e31a535f4128e0b Mon Sep 17 00:00:00 2001 From: Nicolas DET Date: Sun, 5 Nov 2006 12:57:16 +0100 Subject: [PATCH] Add Efika platform support Add Efika (http://www.bplan-gmbh.de/efika_spec_en.html) platform support for arch/powerpc. Signed-off-by: Nicolas DET Acked-by: Benjamin Herrenschmidt Signed-off-by: Paul Mackerras --- arch/powerpc/Kconfig | 8 ++ arch/powerpc/platforms/Makefile | 1 + arch/powerpc/platforms/efika/Makefile | 1 + arch/powerpc/platforms/efika/efika.h | 19 +++++ arch/powerpc/platforms/efika/pci.c | 119 +++++++++++++++++++++++++++ arch/powerpc/platforms/efika/setup.c | 149 ++++++++++++++++++++++++++++++++++ 6 files changed, 297 insertions(+) create mode 100644 arch/powerpc/platforms/efika/Makefile create mode 100644 arch/powerpc/platforms/efika/efika.h create mode 100644 arch/powerpc/platforms/efika/pci.c create mode 100644 arch/powerpc/platforms/efika/setup.c (limited to 'arch/powerpc') diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index 7107d472413..a41d191bf1b 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -386,6 +386,14 @@ config PPC_CHRP select PPC_UDBG_16550 default y +config PPC_EFIKA + bool "bPlan Efika 5k2. MPC5200B based computer" + depends on PPC_MULTIPLATFORM && PPC32 + select PPC_RTAS + select RTAS_PROC + select PPC_MPC52xx + default y + config PPC_PMAC bool "Apple PowerMac based machines" depends on PPC_MULTIPLATFORM diff --git a/arch/powerpc/platforms/Makefile b/arch/powerpc/platforms/Makefile index e58fa953a50..7ad2673d0aa 100644 --- a/arch/powerpc/platforms/Makefile +++ b/arch/powerpc/platforms/Makefile @@ -5,6 +5,7 @@ ifeq ($(CONFIG_PPC64),y) obj-$(CONFIG_PPC_PMAC) += powermac/ endif endif +obj-$(CONFIG_PPC_EFIKA) += efika/ obj-$(CONFIG_PPC_CHRP) += chrp/ obj-$(CONFIG_4xx) += 4xx/ obj-$(CONFIG_PPC_83xx) += 83xx/ diff --git a/arch/powerpc/platforms/efika/Makefile b/arch/powerpc/platforms/efika/Makefile new file mode 100644 index 00000000000..17b2a781fba --- /dev/null +++ b/arch/powerpc/platforms/efika/Makefile @@ -0,0 +1 @@ +obj-y += setup.o mpc52xx.o pci.o diff --git a/arch/powerpc/platforms/efika/efika.h b/arch/powerpc/platforms/efika/efika.h new file mode 100644 index 00000000000..2f060fd097d --- /dev/null +++ b/arch/powerpc/platforms/efika/efika.h @@ -0,0 +1,19 @@ +/* + * Efika 5K2 platform setup - Header file + * + * Copyright (C) 2006 bplan GmbH + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + * + */ + +#ifndef __ARCH_POWERPC_EFIKA__ +#define __ARCH_POWERPC_EFIKA__ + +#define EFIKA_PLATFORM_NAME "Efika" + +extern void __init efika_pcisetup(void); + +#endif diff --git a/arch/powerpc/platforms/efika/pci.c b/arch/powerpc/platforms/efika/pci.c new file mode 100644 index 00000000000..62e05b2a922 --- /dev/null +++ b/arch/powerpc/platforms/efika/pci.c @@ -0,0 +1,119 @@ + +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include + +#include "efika.h" + +#ifdef CONFIG_PCI +/* + * Access functions for PCI config space using RTAS calls. + */ +static int rtas_read_config(struct pci_bus *bus, unsigned int devfn, int offset, + int len, u32 * val) +{ + struct pci_controller *hose = bus->sysdata; + unsigned long addr = (offset & 0xff) | ((devfn & 0xff) << 8) + | (((bus->number - hose->first_busno) & 0xff) << 16) + | (hose->index << 24); + int ret = -1; + int rval; + + rval = rtas_call(rtas_token("read-pci-config"), 2, 2, &ret, addr, len); + *val = ret; + return rval ? PCIBIOS_DEVICE_NOT_FOUND : PCIBIOS_SUCCESSFUL; +} + +static int rtas_write_config(struct pci_bus *bus, unsigned int devfn, + int offset, int len, u32 val) +{ + struct pci_controller *hose = bus->sysdata; + unsigned long addr = (offset & 0xff) | ((devfn & 0xff) << 8) + | (((bus->number - hose->first_busno) & 0xff) << 16) + | (hose->index << 24); + int rval; + + rval = rtas_call(rtas_token("write-pci-config"), 3, 1, NULL, + addr, len, val); + return rval ? PCIBIOS_DEVICE_NOT_FOUND : PCIBIOS_SUCCESSFUL; +} + +static struct pci_ops rtas_pci_ops = { + rtas_read_config, + rtas_write_config +}; + +void __init efika_pcisetup(void) +{ + const int *bus_range; + int len; + struct pci_controller *hose; + struct device_node *root; + struct device_node *pcictrl; + + root = of_find_node_by_path("/"); + if (root == NULL) { + printk(KERN_WARNING EFIKA_PLATFORM_NAME + ": Unable to find the root node\n"); + return; + } + + for (pcictrl = NULL;;) { + pcictrl = of_get_next_child(root, pcictrl); + if ((pcictrl == NULL) || (strcmp(pcictrl->name, "pci") == 0)) + break; + } + + of_node_put(root); + + if (pcictrl == NULL) { + printk(KERN_WARNING EFIKA_PLATFORM_NAME + ": Unable to find the PCI bridge node\n"); + return; + } + + bus_range = get_property(pcictrl, "bus-range", &len); + if (bus_range == NULL || len < 2 * sizeof(int)) { + printk(KERN_WARNING EFIKA_PLATFORM_NAME + ": Can't get bus-range for %s\n", pcictrl->full_name); + return; + } + + if (bus_range[1] == bus_range[0]) + printk(KERN_INFO EFIKA_PLATFORM_NAME ": PCI bus %d", + bus_range[0]); + else + printk(KERN_INFO EFIKA_PLATFORM_NAME ": PCI buses %d..%d", + bus_range[0], bus_range[1]); + printk(" controlled by %s\n", pcictrl->full_name); + printk("\n"); + + hose = pcibios_alloc_controller(); + if (!hose) { + printk(KERN_WARNING EFIKA_PLATFORM_NAME + ": Can't allocate PCI controller structure for %s\n", + pcictrl->full_name); + return; + } + + hose->arch_data = of_node_get(pcictrl); + hose->first_busno = bus_range[0]; + hose->last_busno = bus_range[1]; + hose->ops = &rtas_pci_ops; + + pci_process_bridge_OF_ranges(hose, pcictrl, 0); +} + +#else +void __init efika_pcisetup(void) +{} +#endif diff --git a/arch/powerpc/platforms/efika/setup.c b/arch/powerpc/platforms/efika/setup.c new file mode 100644 index 00000000000..3bc1b5fe0ce --- /dev/null +++ b/arch/powerpc/platforms/efika/setup.c @@ -0,0 +1,149 @@ +/* + * + * Efika 5K2 platform setup + * Some code really inspired from the lite5200b platform. + * + * Copyright (C) 2006 bplan GmbH + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include + +#include "efika.h" + +static void efika_show_cpuinfo(struct seq_file *m) +{ + struct device_node *root; + const char *revision = NULL; + const char *codegendescription = NULL; + const char *codegenvendor = NULL; + + root = of_find_node_by_path("/"); + if (root) { + revision = get_property(root, "revision", NULL); + codegendescription = + get_property(root, "CODEGEN,description", NULL); + codegenvendor = get_property(root, "CODEGEN,vendor", NULL); + + of_node_put(root); + } + + if (codegendescription) + seq_printf(m, "machine\t\t: %s\n", codegendescription); + else + seq_printf(m, "machine\t\t: Efika\n"); + + if (revision) + seq_printf(m, "revision\t: %s\n", revision); + + if (codegenvendor) + seq_printf(m, "vendor\t\t: %s\n", codegenvendor); + + of_node_put(root); +} + +static void __init efika_setup_arch(void) +{ + rtas_initialize(); + +#ifdef CONFIG_BLK_DEV_INITRD + initrd_below_start_ok = 1; + + if (initrd_start) + ROOT_DEV = Root_RAM0; + else +#endif + ROOT_DEV = Root_SDA2; /* sda2 (sda1 is for the kernel) */ + + efika_pcisetup(); + + if (ppc_md.progress) + ppc_md.progress("Linux/PPC " UTS_RELEASE " runnung on Efika ;-)\n", 0x0); +} + +static void __init efika_init(void) +{ + struct device_node *np; + struct device_node *cnp = NULL; + const u32 *base; + + /* Find every child of the SOC node and add it to of_platform */ + np = of_find_node_by_name(NULL, "builtin"); + if (np) { + char name[BUS_ID_SIZE]; + while ((cnp = of_get_next_child(np, cnp))) { + strcpy(name, cnp->name); + + base = get_property(cnp, "reg", NULL); + if (base == NULL) + continue; + + snprintf(name+strlen(name), BUS_ID_SIZE, "@%x", *base); + of_platform_device_create(cnp, name, NULL); + + printk(KERN_INFO EFIKA_PLATFORM_NAME" : Added %s (type '%s' at '%s') to the known devices\n", name, cnp->type, cnp->full_name); + } + } + + if (ppc_md.progress) + ppc_md.progress(" Have fun with your Efika! ", 0x7777); +} + +static int __init efika_probe(void) +{ + char *model = of_get_flat_dt_prop(of_get_flat_dt_root(), + "model", NULL); + + if (model == NULL) + return 0; + if (strcmp(model, "EFIKA5K2")) + return 0; + + ISA_DMA_THRESHOLD = ~0L; + DMA_MODE_READ = 0x44; + DMA_MODE_WRITE = 0x48; + + return 1; +} + +define_machine(efika) +{ + .name = EFIKA_PLATFORM_NAME, + .probe = efika_probe, + .setup_arch = efika_setup_arch, + .init = efika_init, + .show_cpuinfo = efika_show_cpuinfo, + .init_IRQ = mpc52xx_init_irq, + .get_irq = mpc52xx_get_irq, + .restart = rtas_restart, + .power_off = rtas_power_off, + .halt = rtas_halt, + .set_rtc_time = rtas_set_rtc_time, + .get_rtc_time = rtas_get_rtc_time, + .progress = rtas_progress, + .get_boot_time = rtas_get_boot_time, + .calibrate_decr = generic_calibrate_decr, + .phys_mem_access_prot = pci_phys_mem_access_prot, +}; -- cgit v1.2.3-70-g09d2 From a9b14973a8c42b2aecc968851372203c6567e196 Mon Sep 17 00:00:00 2001 From: Andy Fleming Date: Thu, 19 Oct 2006 19:52:26 -0500 Subject: [PATCH] Slight refactor of interrupt mapping for FSL parts * Cleaned up interrupt mapping a little by adding a helper function which parses the irq out of the device-tree, and puts it into a resource. * Changed the arch/ppc platform files to specify PHY_POLL, instead of -1 * Changed the fixed phy to use PHY_IGNORE_INTERRUPT * Added ethtool.h and mii.h to phy.h includes Signed-off-by: Paul Mackerras --- arch/powerpc/sysdev/fsl_soc.c | 28 +++++++++++----------------- arch/ppc/platforms/83xx/mpc834x_sys.c | 4 ++-- arch/ppc/platforms/85xx/mpc8540_ads.c | 4 ++-- arch/ppc/platforms/85xx/mpc8560_ads.c | 4 ++-- arch/ppc/platforms/85xx/mpc85xx_cds_common.c | 6 +++--- arch/ppc/platforms/85xx/sbc8560.c | 2 +- arch/ppc/platforms/85xx/stx_gp3.c | 2 +- arch/ppc/platforms/85xx/tqm85xx.c | 4 ++-- arch/ppc/platforms/mpc8272ads_setup.c | 6 +++--- arch/ppc/platforms/mpc866ads_setup.c | 4 ++-- drivers/net/phy/fixed.c | 2 +- include/asm-powerpc/prom.h | 7 +++++++ include/linux/phy.h | 3 +++ 13 files changed, 40 insertions(+), 36 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/sysdev/fsl_soc.c b/arch/powerpc/sysdev/fsl_soc.c index dbe92ae2033..ad31e56e892 100644 --- a/arch/powerpc/sysdev/fsl_soc.c +++ b/arch/powerpc/sysdev/fsl_soc.c @@ -22,6 +22,7 @@ #include #include #include +#include #include #include #include @@ -146,7 +147,7 @@ static int __init gfar_mdio_of_init(void) } for (k = 0; k < 32; k++) - mdio_data.irq[k] = -1; + mdio_data.irq[k] = PHY_POLL; while ((child = of_get_next_child(np, child)) != NULL) { int irq = irq_of_parse_and_map(child, 0); @@ -177,6 +178,7 @@ static const char *gfar_tx_intr = "tx"; static const char *gfar_rx_intr = "rx"; static const char *gfar_err_intr = "error"; + static int __init gfar_of_init(void) { struct device_node *np; @@ -204,8 +206,7 @@ static int __init gfar_of_init(void) if (ret) goto err; - r[1].start = r[1].end = irq_of_parse_and_map(np, 0); - r[1].flags = IORESOURCE_IRQ; + of_irq_to_resource(np, 0, &r[1]); model = get_property(np, "model", NULL); @@ -214,12 +215,10 @@ static int __init gfar_of_init(void) r[1].name = gfar_tx_intr; r[2].name = gfar_rx_intr; - r[2].start = r[2].end = irq_of_parse_and_map(np, 1); - r[2].flags = IORESOURCE_IRQ; + of_irq_to_resource(np, 1, &r[2]); r[3].name = gfar_err_intr; - r[3].start = r[3].end = irq_of_parse_and_map(np, 2); - r[3].flags = IORESOURCE_IRQ; + of_irq_to_resource(np, 2, &r[3]); n_res += 2; } @@ -323,8 +322,7 @@ static int __init fsl_i2c_of_init(void) if (ret) goto err; - r[1].start = r[1].end = irq_of_parse_and_map(np, 0); - r[1].flags = IORESOURCE_IRQ; + of_irq_to_resource(np, 0, &r[1]); i2c_dev = platform_device_register_simple("fsl-i2c", i, r, 2); if (IS_ERR(i2c_dev)) { @@ -459,8 +457,7 @@ static int __init fsl_usb_of_init(void) if (ret) goto err; - r[1].start = r[1].end = irq_of_parse_and_map(np, 0); - r[1].flags = IORESOURCE_IRQ; + of_irq_to_resource(np, 0, &r[1]); usb_dev_mph = platform_device_register_simple("fsl-ehci", i, r, 2); @@ -507,8 +504,7 @@ static int __init fsl_usb_of_init(void) if (ret) goto unreg_mph; - r[1].start = r[1].end = irq_of_parse_and_map(np, 0); - r[1].flags = IORESOURCE_IRQ; + of_irq_to_resource(np, 0, &r[1]); usb_dev_dr = platform_device_register_simple("fsl-ehci", i, r, 2); @@ -591,8 +587,7 @@ static int __init fs_enet_of_init(void) r[2].name = fcc_regs_c; fs_enet_data.fcc_regs_c = r[2].start; - r[3].start = r[3].end = irq_of_parse_and_map(np, 0); - r[3].flags = IORESOURCE_IRQ; + of_irq_to_resource(np, 0, &r[3]); fs_enet_dev = platform_device_register_simple("fsl-cpm-fcc", i, &r[0], 4); @@ -754,8 +749,7 @@ static int __init cpm_uart_of_init(void) goto err; r[1].name = scc_pram; - r[2].start = r[2].end = irq_of_parse_and_map(np, 0); - r[2].flags = IORESOURCE_IRQ; + of_irq_to_resource(np, 0, &r[2]); cpm_uart_dev = platform_device_register_simple("fsl-cpm-scc:uart", i, &r[0], 3); diff --git a/arch/ppc/platforms/83xx/mpc834x_sys.c b/arch/ppc/platforms/83xx/mpc834x_sys.c index 3397f0de159..b84f8df325c 100644 --- a/arch/ppc/platforms/83xx/mpc834x_sys.c +++ b/arch/ppc/platforms/83xx/mpc834x_sys.c @@ -121,8 +121,8 @@ mpc834x_sys_setup_arch(void) mdata->irq[0] = MPC83xx_IRQ_EXT1; mdata->irq[1] = MPC83xx_IRQ_EXT2; - mdata->irq[2] = -1; - mdata->irq[31] = -1; + mdata->irq[2] = PHY_POLL; + mdata->irq[31] = PHY_POLL; /* setup the board related information for the enet controllers */ pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC83xx_TSEC1); diff --git a/arch/ppc/platforms/85xx/mpc8540_ads.c b/arch/ppc/platforms/85xx/mpc8540_ads.c index 4f839da6782..00a3ba57063 100644 --- a/arch/ppc/platforms/85xx/mpc8540_ads.c +++ b/arch/ppc/platforms/85xx/mpc8540_ads.c @@ -92,9 +92,9 @@ mpc8540ads_setup_arch(void) mdata->irq[0] = MPC85xx_IRQ_EXT5; mdata->irq[1] = MPC85xx_IRQ_EXT5; - mdata->irq[2] = -1; + mdata->irq[2] = PHY_POLL; mdata->irq[3] = MPC85xx_IRQ_EXT5; - mdata->irq[31] = -1; + mdata->irq[31] = PHY_POLL; /* setup the board related information for the enet controllers */ pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC85xx_TSEC1); diff --git a/arch/ppc/platforms/85xx/mpc8560_ads.c b/arch/ppc/platforms/85xx/mpc8560_ads.c index 14ecec7bbed..3a060468dd9 100644 --- a/arch/ppc/platforms/85xx/mpc8560_ads.c +++ b/arch/ppc/platforms/85xx/mpc8560_ads.c @@ -156,9 +156,9 @@ mpc8560ads_setup_arch(void) mdata->irq[0] = MPC85xx_IRQ_EXT5; mdata->irq[1] = MPC85xx_IRQ_EXT5; - mdata->irq[2] = -1; + mdata->irq[2] = PHY_POLL; mdata->irq[3] = MPC85xx_IRQ_EXT5; - mdata->irq[31] = -1; + mdata->irq[31] = PHY_POLL; /* setup the board related information for the enet controllers */ pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC85xx_TSEC1); diff --git a/arch/ppc/platforms/85xx/mpc85xx_cds_common.c b/arch/ppc/platforms/85xx/mpc85xx_cds_common.c index 5ce0f69c1db..2d59eb776c9 100644 --- a/arch/ppc/platforms/85xx/mpc85xx_cds_common.c +++ b/arch/ppc/platforms/85xx/mpc85xx_cds_common.c @@ -451,9 +451,9 @@ mpc85xx_cds_setup_arch(void) mdata->irq[0] = MPC85xx_IRQ_EXT5; mdata->irq[1] = MPC85xx_IRQ_EXT5; - mdata->irq[2] = -1; - mdata->irq[3] = -1; - mdata->irq[31] = -1; + mdata->irq[2] = PHY_POLL; + mdata->irq[3] = PHY_POLL; + mdata->irq[31] = PHY_POLL; /* setup the board related information for the enet controllers */ pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC85xx_TSEC1); diff --git a/arch/ppc/platforms/85xx/sbc8560.c b/arch/ppc/platforms/85xx/sbc8560.c index 764d580ff53..1d10ab98f66 100644 --- a/arch/ppc/platforms/85xx/sbc8560.c +++ b/arch/ppc/platforms/85xx/sbc8560.c @@ -129,7 +129,7 @@ sbc8560_setup_arch(void) mdata->irq[25] = MPC85xx_IRQ_EXT6; mdata->irq[26] = MPC85xx_IRQ_EXT7; - mdata->irq[31] = -1; + mdata->irq[31] = PHY_POLL; /* setup the board related information for the enet controllers */ pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC85xx_TSEC1); diff --git a/arch/ppc/platforms/85xx/stx_gp3.c b/arch/ppc/platforms/85xx/stx_gp3.c index 4bb18ab2767..b1f5b737c70 100644 --- a/arch/ppc/platforms/85xx/stx_gp3.c +++ b/arch/ppc/platforms/85xx/stx_gp3.c @@ -123,7 +123,7 @@ gp3_setup_arch(void) mdata->irq[2] = MPC85xx_IRQ_EXT5; mdata->irq[4] = MPC85xx_IRQ_EXT5; - mdata->irq[31] = -1; + mdata->irq[31] = PHY_POLL; /* setup the board related information for the enet controllers */ pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC85xx_TSEC1); diff --git a/arch/ppc/platforms/85xx/tqm85xx.c b/arch/ppc/platforms/85xx/tqm85xx.c index dd45f2e1844..4ee2bd156dc 100644 --- a/arch/ppc/platforms/85xx/tqm85xx.c +++ b/arch/ppc/platforms/85xx/tqm85xx.c @@ -137,9 +137,9 @@ tqm85xx_setup_arch(void) mdata->irq[0] = MPC85xx_IRQ_EXT8; mdata->irq[1] = MPC85xx_IRQ_EXT8; - mdata->irq[2] = -1; + mdata->irq[2] = PHY_POLL; mdata->irq[3] = MPC85xx_IRQ_EXT8; - mdata->irq[31] = -1; + mdata->irq[31] = PHY_POLL; /* setup the board related information for the enet controllers */ pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC85xx_TSEC1); diff --git a/arch/ppc/platforms/mpc8272ads_setup.c b/arch/ppc/platforms/mpc8272ads_setup.c index 1f9ea36837b..0bc06768cf2 100644 --- a/arch/ppc/platforms/mpc8272ads_setup.c +++ b/arch/ppc/platforms/mpc8272ads_setup.c @@ -266,10 +266,10 @@ static void __init mpc8272ads_fixup_mdio_pdata(struct platform_device *pdev, int idx) { m82xx_mii_bb_pdata.irq[0] = PHY_INTERRUPT; - m82xx_mii_bb_pdata.irq[1] = -1; - m82xx_mii_bb_pdata.irq[2] = -1; + m82xx_mii_bb_pdata.irq[1] = PHY_POLL; + m82xx_mii_bb_pdata.irq[2] = PHY_POLL; m82xx_mii_bb_pdata.irq[3] = PHY_INTERRUPT; - m82xx_mii_bb_pdata.irq[31] = -1; + m82xx_mii_bb_pdata.irq[31] = PHY_POLL; m82xx_mii_bb_pdata.mdio_dat.offset = diff --git a/arch/ppc/platforms/mpc866ads_setup.c b/arch/ppc/platforms/mpc866ads_setup.c index e95d2c11174..8a0c07eb444 100644 --- a/arch/ppc/platforms/mpc866ads_setup.c +++ b/arch/ppc/platforms/mpc866ads_setup.c @@ -361,7 +361,7 @@ int __init mpc866ads_init(void) fmpi->mii_speed = ((((bd->bi_intfreq + 4999999) / 2500000) / 2) & 0x3F) << 1; /* No PHY interrupt line here */ - fmpi->irq[0xf] = -1; + fmpi->irq[0xf] = PHY_POLL; /* Since either of the uarts could be used as console, they need to ready */ #ifdef CONFIG_SERIAL_CPM_SMC1 @@ -380,7 +380,7 @@ int __init mpc866ads_init(void) fmpi->mii_speed = ((((bd->bi_intfreq + 4999999) / 2500000) / 2) & 0x3F) << 1; /* No PHY interrupt line here */ - fmpi->irq[0xf] = -1; + fmpi->irq[0xf] = PHY_POLL; return 0; } diff --git a/drivers/net/phy/fixed.c b/drivers/net/phy/fixed.c index f14e99276db..096d4a100bf 100644 --- a/drivers/net/phy/fixed.c +++ b/drivers/net/phy/fixed.c @@ -254,7 +254,7 @@ static int fixed_mdio_register_device(int number, int speed, int duplex) goto device_create_fail; } - phydev->irq = -1; + phydev->irq = PHY_IGNORE_INTERRUPT; phydev->dev.bus = &mdio_bus_type; if(number) diff --git a/include/asm-powerpc/prom.h b/include/asm-powerpc/prom.h index 52462976933..39f04ef96f3 100644 --- a/include/asm-powerpc/prom.h +++ b/include/asm-powerpc/prom.h @@ -17,6 +17,7 @@ */ #include #include +#include #include /* Definitions used by the flattened device tree */ @@ -331,6 +332,12 @@ extern int of_irq_map_one(struct device_node *device, int index, struct pci_dev; extern int of_irq_map_pci(struct pci_dev *pdev, struct of_irq *out_irq); +static inline void of_irq_to_resource(struct device_node *dev, int index, struct resource *r) +{ + r->start = r->end = irq_of_parse_and_map(dev, index); + r->flags = IORESOURCE_IRQ; +} + #endif /* __KERNEL__ */ #endif /* _POWERPC_PROM_H */ diff --git a/include/linux/phy.h b/include/linux/phy.h index 9447a57ee8a..892d6abe57e 100644 --- a/include/linux/phy.h +++ b/include/linux/phy.h @@ -20,6 +20,9 @@ #include #include +#include +#include +#include #define PHY_BASIC_FEATURES (SUPPORTED_10baseT_Half | \ SUPPORTED_10baseT_Full | \ -- cgit v1.2.3-70-g09d2 From a416dd8d9cd3a3fa77b9839e0e6fc3c54927d8c3 Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Wed, 8 Nov 2006 10:22:59 +1100 Subject: [PATCH] Do a single one-line printk in bad_page_fault() bad_page_fault() prints a message telling the user what type of bad fault we took. The first line of this message is currently implemented as two separate printks. This has the unfortunate effect that if several cpus simultaneously take a bad fault, the first and second parts of the printk get jumbled up, which looks dodge and is hard to read. So do a single one-line printk for each fault type. Signed-off-by: Michael Ellerman Signed-off-by: Paul Mackerras --- arch/powerpc/mm/fault.c | 25 ++++++++++++++----------- 1 file changed, 14 insertions(+), 11 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/mm/fault.c b/arch/powerpc/mm/fault.c index e8fa50624b7..03aeb3a4607 100644 --- a/arch/powerpc/mm/fault.c +++ b/arch/powerpc/mm/fault.c @@ -426,18 +426,21 @@ void bad_page_fault(struct pt_regs *regs, unsigned long address, int sig) /* kernel has accessed a bad area */ - printk(KERN_ALERT "Unable to handle kernel paging request for "); switch (regs->trap) { - case 0x300: - case 0x380: - printk("data at address 0x%08lx\n", regs->dar); - break; - case 0x400: - case 0x480: - printk("instruction fetch\n"); - break; - default: - printk("unknown fault\n"); + case 0x300: + case 0x380: + printk(KERN_ALERT "Unable to handle kernel paging request for " + "data at address 0x%08lx\n", regs->dar); + break; + case 0x400: + case 0x480: + printk(KERN_ALERT "Unable to handle kernel paging request for " + "instruction fetch\n"); + break; + default: + printk(KERN_ALERT "Unable to handle kernel paging request for " + "unknown fault\n"); + break; } printk(KERN_ALERT "Faulting instruction address: 0x%08lx\n", regs->nip); -- cgit v1.2.3-70-g09d2 From e9c4b4bd56a7dfdc8879a5876e498991c9194321 Mon Sep 17 00:00:00 2001 From: "Mark A. Greer" Date: Wed, 8 Nov 2006 17:50:44 -0700 Subject: [PATCH] Remove dtb file created by wrapper script When the wrapper script is passed a dts file, it runs 'dtc' to create a dtb file. This patch deletes that dtb file once its no longer needed. Signed-off-by: Mark A. Greer Signed-off-by: Paul Mackerras --- arch/powerpc/boot/wrapper | 3 +++ 1 file changed, 3 insertions(+) (limited to 'arch/powerpc') diff --git a/arch/powerpc/boot/wrapper b/arch/powerpc/boot/wrapper index b5fb1fee76f..024e4d425c5 100755 --- a/arch/powerpc/boot/wrapper +++ b/arch/powerpc/boot/wrapper @@ -184,6 +184,9 @@ fi if [ -n "$dtb" ]; then addsec $tmp "$dtb" .kernel:dtb + if [ -n "$dts" ]; then + rm $dtb + fi fi if [ "$platform" != "miboot" ]; then -- cgit v1.2.3-70-g09d2 From 25787afa5c16d35cdfb191f63a3a406b3206744e Mon Sep 17 00:00:00 2001 From: "Mark A. Greer" Date: Wed, 8 Nov 2006 17:52:25 -0700 Subject: [PATCH] Remove arch/powerpc/boot/zImage file. The bootwrapper Makefile does not clean up the 'zImage' file that may be left laying around. This patch removes it when cleaning that directory. Signed-off-by: Mark A. Greer Signed-off-by: Paul Mackerras --- arch/powerpc/boot/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile index 789def38af4..042bac319be 100644 --- a/arch/powerpc/boot/Makefile +++ b/arch/powerpc/boot/Makefile @@ -75,7 +75,7 @@ $(obj)/zImage.lds $(obj)/zImage.coff.lds: $(obj)/%: $(srctree)/$(src)/%.S @cp $< $@ clean-files := $(zlib) $(zlibheader) $(zliblinuxheader) \ - empty.c zImage.coff.lds zImage.lds zImage.sandpoint + empty.c zImage zImage.coff.lds zImage.lds zImage.sandpoint quiet_cmd_bootcc = BOOTCC $@ cmd_bootcc = $(CROSS32CC) -Wp,-MD,$(depfile) $(BOOTCFLAGS) -c -o $@ $< -- cgit v1.2.3-70-g09d2 From 0613ffbf53625ccecb96500b1cc7b0ef70cc8f04 Mon Sep 17 00:00:00 2001 From: Olaf Hering Date: Thu, 9 Nov 2006 18:53:52 +0100 Subject: [PATCH] Fix compile warnings with CONFIG_PM=n Fix compile warnings with CONFIG_PM=n arch/powerpc/platforms/powermac/feature.c:489: warning: 'save_gpio_levels' defined but not used arch/powerpc/platforms/powermac/feature.c:490: warning: 'save_gpio_extint' defined but not used arch/powerpc/platforms/powermac/feature.c:491: warning: 'save_gpio_normal' defined but not used arch/powerpc/platforms/powermac/feature.c:492: warning: 'save_unin_clock_ctl' defined but not used Signed-off-by: Olaf Hering Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/powermac/feature.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/platforms/powermac/feature.c b/arch/powerpc/platforms/powermac/feature.c index e49621be664..c29a6a064d2 100644 --- a/arch/powerpc/platforms/powermac/feature.c +++ b/arch/powerpc/platforms/powermac/feature.c @@ -486,10 +486,6 @@ static long heathrow_sound_enable(struct device_node *node, long param, static u32 save_fcr[6]; static u32 save_mbcr; -static u32 save_gpio_levels[2]; -static u8 save_gpio_extint[KEYLARGO_GPIO_EXTINT_CNT]; -static u8 save_gpio_normal[KEYLARGO_GPIO_CNT]; -static u32 save_unin_clock_ctl; static struct dbdma_regs save_dbdma[13]; static struct dbdma_regs save_alt_dbdma[13]; @@ -1548,6 +1544,10 @@ void g5_phy_disable_cpu1(void) #ifdef CONFIG_PM +static u32 save_gpio_levels[2]; +static u8 save_gpio_extint[KEYLARGO_GPIO_EXTINT_CNT]; +static u8 save_gpio_normal[KEYLARGO_GPIO_CNT]; +static u32 save_unin_clock_ctl; static void keylargo_shutdown(struct macio_chip *macio, int sleep_mode) { -- cgit v1.2.3-70-g09d2 From fc9e8b4e275b6882cb537154c8fc7cde3692eea0 Mon Sep 17 00:00:00 2001 From: Timur Tabi Date: Thu, 9 Nov 2006 15:42:44 -0600 Subject: [PATCH] Optimize qe_brg struct to use an array The qe_brg structure manually defined each of the 16 BRG registers, which made any code that used them cumbersome. This patch replaces the fields with a single 16-element array. Signed-off-by: Timur Tabi Signed-off-by: Kumar Gala Signed-off-by: Paul Mackerras --- arch/powerpc/sysdev/qe_lib/qe.c | 3 +-- include/asm-powerpc/immap_qe.h | 17 +---------------- 2 files changed, 2 insertions(+), 18 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/sysdev/qe_lib/qe.c b/arch/powerpc/sysdev/qe_lib/qe.c index 2bae632d3ad..812c87c73bb 100644 --- a/arch/powerpc/sysdev/qe_lib/qe.c +++ b/arch/powerpc/sysdev/qe_lib/qe.c @@ -175,8 +175,7 @@ void qe_setbrg(u32 brg, u32 rate) u32 divisor, tempval; int div16 = 0; - bp = &qe_immr->brg.brgc1; - bp += brg; + bp = &qe_immr->brg.brgc[brg]; divisor = (get_brg_clk() / rate); if (divisor > QE_BRGC_DIVISOR_MAX + 1) { diff --git a/include/asm-powerpc/immap_qe.h b/include/asm-powerpc/immap_qe.h index ce12f85fff9..9fdd0491f6a 100644 --- a/include/asm-powerpc/immap_qe.h +++ b/include/asm-powerpc/immap_qe.h @@ -136,22 +136,7 @@ struct qe_timers { /* BRG */ struct qe_brg { - __be32 brgc1; /* BRG1 configuration register */ - __be32 brgc2; /* BRG2 configuration register */ - __be32 brgc3; /* BRG3 configuration register */ - __be32 brgc4; /* BRG4 configuration register */ - __be32 brgc5; /* BRG5 configuration register */ - __be32 brgc6; /* BRG6 configuration register */ - __be32 brgc7; /* BRG7 configuration register */ - __be32 brgc8; /* BRG8 configuration register */ - __be32 brgc9; /* BRG9 configuration register */ - __be32 brgc10; /* BRG10 configuration register */ - __be32 brgc11; /* BRG11 configuration register */ - __be32 brgc12; /* BRG12 configuration register */ - __be32 brgc13; /* BRG13 configuration register */ - __be32 brgc14; /* BRG14 configuration register */ - __be32 brgc15; /* BRG15 configuration register */ - __be32 brgc16; /* BRG16 configuration register */ + __be32 brgc[16]; /* BRG configuration registers */ u8 res0[0x40]; } __attribute__ ((packed)); -- cgit v1.2.3-70-g09d2 From 57744ea95edd340d7140852ce86c743df2cd588c Mon Sep 17 00:00:00 2001 From: Geoff Levand Date: Fri, 10 Nov 2006 12:01:02 -0800 Subject: [PATCH] Check for null init_early routine Add a check for a null ppc_md.init_early to allow platforms that don't require an init_early routine to just set this member to null. Signed-off-by: Geoff Levand Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/setup_64.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c index ae6b67ce54e..2fef772edfc 100644 --- a/arch/powerpc/kernel/setup_64.c +++ b/arch/powerpc/kernel/setup_64.c @@ -380,7 +380,8 @@ void __init setup_system(void) * setting up the hash table pointers. It also sets up some interrupt-mapping * related options that will be used by finish_device_tree() */ - ppc_md.init_early(); + if (ppc_md.init_early) + ppc_md.init_early(); /* * We can discover serial ports now since the above did setup the -- cgit v1.2.3-70-g09d2 From b61c5509fe8f6c665c146ab14f960000d4a5d1a9 Mon Sep 17 00:00:00 2001 From: Kim Phillips Date: Fri, 10 Nov 2006 18:08:30 -0600 Subject: [PATCH] Make git ignore new wrapper generated files The new 'wrapper' code generates files that git should ignore; add them to .gitignore. Signed-off-by: Kim Phillips Signed-off-by: Paul Mackerras --- arch/powerpc/boot/.gitignore | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'arch/powerpc') diff --git a/arch/powerpc/boot/.gitignore b/arch/powerpc/boot/.gitignore index 45c9ad23526..590e72f06d5 100644 --- a/arch/powerpc/boot/.gitignore +++ b/arch/powerpc/boot/.gitignore @@ -1,20 +1,27 @@ addnote +empty.c +hack-coff infblock.c infblock.h infcodes.c infcodes.h inffast.c inffast.h +inffixed.h inflate.c +inflate.h inftrees.c inftrees.h infutil.c infutil.h kernel-vmlinux.strip.c kernel-vmlinux.strip.gz +mktree uImage zImage zImage.vmode +zImage.coff.lds +zImage.lds zconf.h zlib.h zutil.h -- cgit v1.2.3-70-g09d2 From f90bb153b1493719d18b4529a46ebfe43220ea6c Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Sat, 11 Nov 2006 17:24:51 +1100 Subject: [POWERPC] Make pci_read_irq_line the default This patch reworks the way IRQs are fixed up on PCI for arch powerpc. It makes pci_read_irq_line() called by default in the PCI code for devices that are probed, and add an optional per-device fixup in ppc_md for platforms that really need to correct what they obtain from pci_read_irq_line(). It also removes ppc_md.irq_bus_setup which was only used by pSeries and should not be needed anymore. I've also removed the pSeries s7a workaround as it can't work with the current interrupt code anyway. I'm trying to get one of these machines working so I can test a proper fix for that problem. I also haven't updated the old-style fixup code from 85xx_cds.c because it's actually buggy :) It assigns pci_dev->irq hard coded numbers which is no good with the new IRQ mapping code. It should at least use irq_create_mapping(NULL, hard_coded_number); and possibly also set_irq_type() to set them as level low. Signed-off-by: Benjamin Herrenschmidt Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/pci_32.c | 10 +++++ arch/powerpc/kernel/pci_64.c | 8 +++- arch/powerpc/platforms/82xx/mpc82xx_ads.c | 13 ------- arch/powerpc/platforms/83xx/mpc834x_itx.c | 3 -- arch/powerpc/platforms/83xx/mpc834x_sys.c | 3 -- arch/powerpc/platforms/83xx/mpc83xx.h | 1 - arch/powerpc/platforms/83xx/pci.c | 9 ----- arch/powerpc/platforms/85xx/mpc85xx_ads.c | 11 ------ arch/powerpc/platforms/86xx/mpc86xx_hpcn.c | 10 ----- arch/powerpc/platforms/cell/setup.c | 9 ----- arch/powerpc/platforms/chrp/chrp.h | 1 - arch/powerpc/platforms/chrp/pci.c | 9 ----- arch/powerpc/platforms/chrp/setup.c | 1 - arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c | 16 +++----- arch/powerpc/platforms/maple/maple.h | 2 +- arch/powerpc/platforms/maple/pci.c | 47 +++++++++-------------- arch/powerpc/platforms/maple/setup.c | 2 +- arch/powerpc/platforms/pasemi/pasemi.h | 1 - arch/powerpc/platforms/pasemi/pci.c | 8 ---- arch/powerpc/platforms/pasemi/setup.c | 1 - arch/powerpc/platforms/powermac/pci.c | 35 +++++++---------- arch/powerpc/platforms/powermac/pmac.h | 2 +- arch/powerpc/platforms/powermac/setup.c | 2 +- arch/powerpc/platforms/pseries/pci.c | 35 ----------------- arch/powerpc/platforms/pseries/setup.c | 1 - include/asm-powerpc/machdep.h | 2 +- include/asm-powerpc/ppc-pci.h | 1 - 27 files changed, 59 insertions(+), 184 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/kernel/pci_32.c b/arch/powerpc/kernel/pci_32.c index 0d9ff72e285..853ecef8178 100644 --- a/arch/powerpc/kernel/pci_32.c +++ b/arch/powerpc/kernel/pci_32.c @@ -12,6 +12,7 @@ #include #include #include +#include #include #include @@ -1338,6 +1339,7 @@ void __init pcibios_fixup_bus(struct pci_bus *bus) struct pci_controller *hose = (struct pci_controller *) bus->sysdata; unsigned long io_offset; struct resource *res; + struct pci_dev *dev; int i; io_offset = (unsigned long)hose->io_base_virt - isa_io_base; @@ -1390,8 +1392,16 @@ void __init pcibios_fixup_bus(struct pci_bus *bus) } } + /* Platform specific bus fixups */ if (ppc_md.pcibios_fixup_bus) ppc_md.pcibios_fixup_bus(bus); + + /* Read default IRQs and fixup if necessary */ + list_for_each_entry(dev, &bus->devices, bus_list) { + pci_read_irq_line(dev); + if (ppc_md.pci_irq_fixup) + ppc_md.pci_irq_fixup(dev); + } } char __init *pcibios_setup(char *str) diff --git a/arch/powerpc/kernel/pci_64.c b/arch/powerpc/kernel/pci_64.c index 80ae9ea15cd..9a6bb80a8cd 100644 --- a/arch/powerpc/kernel/pci_64.c +++ b/arch/powerpc/kernel/pci_64.c @@ -1215,8 +1215,12 @@ static void __devinit do_bus_setup(struct pci_bus *bus) list_for_each_entry(dev, &bus->devices, bus_list) ppc_md.iommu_dev_setup(dev); - if (ppc_md.irq_bus_setup) - ppc_md.irq_bus_setup(bus); + /* Read default IRQs and fixup if necessary */ + list_for_each_entry(dev, &bus->devices, bus_list) { + pci_read_irq_line(dev); + if (ppc_md.pci_irq_fixup) + ppc_md.pci_irq_fixup(dev); + } } void __devinit pcibios_fixup_bus(struct pci_bus *bus) diff --git a/arch/powerpc/platforms/82xx/mpc82xx_ads.c b/arch/powerpc/platforms/82xx/mpc82xx_ads.c index bb9acbb9817..ea880f1f0dc 100644 --- a/arch/powerpc/platforms/82xx/mpc82xx_ads.c +++ b/arch/powerpc/platforms/82xx/mpc82xx_ads.c @@ -515,16 +515,6 @@ static int m82xx_pci_exclude_device(u_char bus, u_char devfn) return PCIBIOS_SUCCESSFUL; } -static void -__init mpc82xx_pcibios_fixup(void) -{ - struct pci_dev *dev = NULL; - - for_each_pci_dev(dev) { - pci_read_irq_line(dev); - } -} - void __init add_bridge(struct device_node *np) { int len; @@ -597,9 +587,6 @@ static void __init mpc82xx_ads_setup_arch(void) add_bridge(np); of_node_put(np); - ppc_md.pci_map_irq = NULL; - ppc_md.pcibios_fixup = mpc82xx_pcibios_fixup; - ppc_md.pcibios_fixup_bus = NULL; #endif #ifdef CONFIG_ROOT_NFS diff --git a/arch/powerpc/platforms/83xx/mpc834x_itx.c b/arch/powerpc/platforms/83xx/mpc834x_itx.c index e2bcaaf6b32..314c42ac604 100644 --- a/arch/powerpc/platforms/83xx/mpc834x_itx.c +++ b/arch/powerpc/platforms/83xx/mpc834x_itx.c @@ -118,7 +118,4 @@ define_machine(mpc834x_itx) { .time_init = mpc83xx_time_init, .calibrate_decr = generic_calibrate_decr, .progress = udbg_progress, -#ifdef CONFIG_PCI - .pcibios_fixup = mpc83xx_pcibios_fixup, -#endif }; diff --git a/arch/powerpc/platforms/83xx/mpc834x_sys.c b/arch/powerpc/platforms/83xx/mpc834x_sys.c index 677196187a4..80b735a414d 100644 --- a/arch/powerpc/platforms/83xx/mpc834x_sys.c +++ b/arch/powerpc/platforms/83xx/mpc834x_sys.c @@ -137,7 +137,4 @@ define_machine(mpc834x_sys) { .time_init = mpc83xx_time_init, .calibrate_decr = generic_calibrate_decr, .progress = udbg_progress, -#ifdef CONFIG_PCI - .pcibios_fixup = mpc83xx_pcibios_fixup, -#endif }; diff --git a/arch/powerpc/platforms/83xx/mpc83xx.h b/arch/powerpc/platforms/83xx/mpc83xx.h index 2c82bca9bfb..01cae106912 100644 --- a/arch/powerpc/platforms/83xx/mpc83xx.h +++ b/arch/powerpc/platforms/83xx/mpc83xx.h @@ -11,7 +11,6 @@ extern int add_bridge(struct device_node *dev); extern int mpc83xx_exclude_device(u_char bus, u_char devfn); -extern void mpc83xx_pcibios_fixup(void); extern void mpc83xx_restart(char *cmd); extern long mpc83xx_time_init(void); diff --git a/arch/powerpc/platforms/83xx/pci.c b/arch/powerpc/platforms/83xx/pci.c index 4557ac5255c..9c365055514 100644 --- a/arch/powerpc/platforms/83xx/pci.c +++ b/arch/powerpc/platforms/83xx/pci.c @@ -45,15 +45,6 @@ int mpc83xx_exclude_device(u_char bus, u_char devfn) return PCIBIOS_SUCCESSFUL; } -void __init mpc83xx_pcibios_fixup(void) -{ - struct pci_dev *dev = NULL; - - /* map all the PCI irqs */ - for_each_pci_dev(dev) - pci_read_irq_line(dev); -} - int __init add_bridge(struct device_node *dev) { int len; diff --git a/arch/powerpc/platforms/85xx/mpc85xx_ads.c b/arch/powerpc/platforms/85xx/mpc85xx_ads.c index d3e669d69c7..bda2e55e6c4 100644 --- a/arch/powerpc/platforms/85xx/mpc85xx_ads.c +++ b/arch/powerpc/platforms/85xx/mpc85xx_ads.c @@ -53,15 +53,6 @@ mpc85xx_exclude_device(u_char bus, u_char devfn) else return PCIBIOS_SUCCESSFUL; } - -void __init -mpc85xx_pcibios_fixup(void) -{ - struct pci_dev *dev = NULL; - - for_each_pci_dev(dev) - pci_read_irq_line(dev); -} #endif /* CONFIG_PCI */ #ifdef CONFIG_CPM2 @@ -253,8 +244,6 @@ static void __init mpc85xx_ads_setup_arch(void) #ifdef CONFIG_PCI for (np = NULL; (np = of_find_node_by_type(np, "pci")) != NULL;) add_bridge(np); - - ppc_md.pcibios_fixup = mpc85xx_pcibios_fixup; ppc_md.pci_exclude_device = mpc85xx_exclude_device; #endif diff --git a/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c b/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c index 1a1c226ad4d..f4dd5f2f8a2 100644 --- a/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c +++ b/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c @@ -398,15 +398,6 @@ mpc86xx_hpcn_show_cpuinfo(struct seq_file *m) } -void __init mpc86xx_hpcn_pcibios_fixup(void) -{ - struct pci_dev *dev = NULL; - - for_each_pci_dev(dev) - pci_read_irq_line(dev); -} - - /* * Called very early, device-tree isn't unflattened */ @@ -461,7 +452,6 @@ define_machine(mpc86xx_hpcn) { .setup_arch = mpc86xx_hpcn_setup_arch, .init_IRQ = mpc86xx_hpcn_init_irq, .show_cpuinfo = mpc86xx_hpcn_show_cpuinfo, - .pcibios_fixup = mpc86xx_hpcn_pcibios_fixup, .get_irq = mpic_get_irq, .restart = mpc86xx_restart, .time_init = mpc86xx_time_init, diff --git a/arch/powerpc/platforms/cell/setup.c b/arch/powerpc/platforms/cell/setup.c index 22c228a49c3..1944bb413f0 100644 --- a/arch/powerpc/platforms/cell/setup.c +++ b/arch/powerpc/platforms/cell/setup.c @@ -80,14 +80,6 @@ static void cell_progress(char *s, unsigned short hex) printk("*** %04x : %s\n", hex, s ? s : ""); } -static void __init cell_pcibios_fixup(void) -{ - struct pci_dev *dev = NULL; - - for_each_pci_dev(dev) - pci_read_irq_line(dev); -} - static void __init cell_init_irq(void) { iic_init_IRQ(); @@ -180,7 +172,6 @@ define_machine(cell) { .check_legacy_ioport = cell_check_legacy_ioport, .progress = cell_progress, .init_IRQ = cell_init_irq, - .pcibios_fixup = cell_pcibios_fixup, #ifdef CONFIG_KEXEC .machine_kexec = default_machine_kexec, .machine_kexec_prepare = default_machine_kexec_prepare, diff --git a/arch/powerpc/platforms/chrp/chrp.h b/arch/powerpc/platforms/chrp/chrp.h index 996c28744e9..63f0aee4c15 100644 --- a/arch/powerpc/platforms/chrp/chrp.h +++ b/arch/powerpc/platforms/chrp/chrp.h @@ -9,4 +9,3 @@ extern long chrp_time_init(void); extern void chrp_find_bridges(void); extern void chrp_event_scan(unsigned long); -extern void chrp_pcibios_fixup(void); diff --git a/arch/powerpc/platforms/chrp/pci.c b/arch/powerpc/platforms/chrp/pci.c index 0f4340506c7..ddb4a116ea8 100644 --- a/arch/powerpc/platforms/chrp/pci.c +++ b/arch/powerpc/platforms/chrp/pci.c @@ -156,15 +156,6 @@ hydra_init(void) return 1; } -void __init -chrp_pcibios_fixup(void) -{ - struct pci_dev *dev = NULL; - - for_each_pci_dev(dev) - pci_read_irq_line(dev); -} - #define PRG_CL_RESET_VALID 0x00010000 static void __init diff --git a/arch/powerpc/platforms/chrp/setup.c b/arch/powerpc/platforms/chrp/setup.c index 49b8dabcbc9..e6807d6d75b 100644 --- a/arch/powerpc/platforms/chrp/setup.c +++ b/arch/powerpc/platforms/chrp/setup.c @@ -600,7 +600,6 @@ define_machine(chrp) { .init = chrp_init2, .show_cpuinfo = chrp_show_cpuinfo, .init_IRQ = chrp_init_IRQ, - .pcibios_fixup = chrp_pcibios_fixup, .restart = rtas_restart, .power_off = rtas_power_off, .halt = rtas_halt, diff --git a/arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c b/arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c index bdb475c65cb..c6113c39009 100644 --- a/arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c +++ b/arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c @@ -89,7 +89,7 @@ u8 find_slot_by_devfn(unsigned int *interrupt_map, unsigned int devfn) /* * Scans the interrupt map for pci device */ -void mpc7448_hpc2_fixup_irq(struct pci_dev *dev) +void __devinit mpc7448_hpc2_fixup_irq(struct pci_dev *dev) { struct pci_controller *hose; struct device_node *node; @@ -117,19 +117,13 @@ void mpc7448_hpc2_fixup_irq(struct pci_dev *dev) pin = 1; pin--; dev->irq = interrupt[slot*4*7 + pin*7 + 5]; + + pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq); + DBG("TSI_PCI: dev->irq = 0x%x\n", dev->irq); } /* temporary pci irq map fixup*/ -void __init mpc7448_hpc2_pcibios_fixup(void) -{ - struct pci_dev *dev = NULL; - for_each_pci_dev(dev) { - mpc7448_hpc2_fixup_irq(dev); - pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq); - } -} - static void __init mpc7448_hpc2_setup_arch(void) { struct device_node *cpu; @@ -300,7 +294,7 @@ define_machine(mpc7448_hpc2){ .init_IRQ = mpc7448_hpc2_init_IRQ, .show_cpuinfo = mpc7448_hpc2_show_cpuinfo, .get_irq = mpic_get_irq, - .pcibios_fixup = mpc7448_hpc2_pcibios_fixup, + .pci_irq_fixup = mpc7448_hpc2_fixup_irq, .restart = mpc7448_hpc2_restart, .calibrate_decr = generic_calibrate_decr, .machine_check_exception= mpc7448_machine_check_exception, diff --git a/arch/powerpc/platforms/maple/maple.h b/arch/powerpc/platforms/maple/maple.h index 0657c579b84..c6911ddc479 100644 --- a/arch/powerpc/platforms/maple/maple.h +++ b/arch/powerpc/platforms/maple/maple.h @@ -8,5 +8,5 @@ extern void maple_get_rtc_time(struct rtc_time *tm); extern unsigned long maple_get_boot_time(void); extern void maple_calibrate_decr(void); extern void maple_pci_init(void); -extern void maple_pcibios_fixup(void); +extern void maple_pci_irq_fixup(struct pci_dev *dev); extern int maple_pci_get_legacy_ide_irq(struct pci_dev *dev, int channel); diff --git a/arch/powerpc/platforms/maple/pci.c b/arch/powerpc/platforms/maple/pci.c index 63b4d1bff35..3a32deda765 100644 --- a/arch/powerpc/platforms/maple/pci.c +++ b/arch/powerpc/platforms/maple/pci.c @@ -502,38 +502,29 @@ static int __init add_bridge(struct device_node *dev) } -void __init maple_pcibios_fixup(void) +void __devinit maple_pci_irq_fixup(struct pci_dev *dev) { - struct pci_dev *dev = NULL; - - DBG(" -> maple_pcibios_fixup\n"); - - for_each_pci_dev(dev) { - /* Fixup IRQ for PCIe host */ - if (u4_pcie != NULL && dev->bus->number == 0 && - pci_bus_to_host(dev->bus) == u4_pcie) { - printk(KERN_DEBUG "Fixup U4 PCIe IRQ\n"); - dev->irq = irq_create_mapping(NULL, 1); - if (dev->irq != NO_IRQ) - set_irq_type(dev->irq, IRQ_TYPE_LEVEL_LOW); - continue; - } - - /* Hide AMD8111 IDE interrupt when in legacy mode so - * the driver calls pci_get_legacy_ide_irq() - */ - if (dev->vendor == PCI_VENDOR_ID_AMD && - dev->device == PCI_DEVICE_ID_AMD_8111_IDE && - (dev->class & 5) != 5) { - dev->irq = NO_IRQ; - continue; - } + DBG(" -> maple_pci_irq_fixup\n"); + + /* Fixup IRQ for PCIe host */ + if (u4_pcie != NULL && dev->bus->number == 0 && + pci_bus_to_host(dev->bus) == u4_pcie) { + printk(KERN_DEBUG "Fixup U4 PCIe IRQ\n"); + dev->irq = irq_create_mapping(NULL, 1); + if (dev->irq != NO_IRQ) + set_irq_type(dev->irq, IRQ_TYPE_LEVEL_LOW); + } - /* For all others, map the interrupt from the device-tree */ - pci_read_irq_line(dev); + /* Hide AMD8111 IDE interrupt when in legacy mode so + * the driver calls pci_get_legacy_ide_irq() + */ + if (dev->vendor == PCI_VENDOR_ID_AMD && + dev->device == PCI_DEVICE_ID_AMD_8111_IDE && + (dev->class & 5) != 5) { + dev->irq = NO_IRQ; } - DBG(" <- maple_pcibios_fixup\n"); + DBG(" <- maple_pci_irq_fixup\n"); } static void __init maple_fixup_phb_resources(void) diff --git a/arch/powerpc/platforms/maple/setup.c b/arch/powerpc/platforms/maple/setup.c index fe6b9bff61b..094989d50ba 100644 --- a/arch/powerpc/platforms/maple/setup.c +++ b/arch/powerpc/platforms/maple/setup.c @@ -312,7 +312,7 @@ define_machine(maple_md) { .setup_arch = maple_setup_arch, .init_early = maple_init_early, .init_IRQ = maple_init_IRQ, - .pcibios_fixup = maple_pcibios_fixup, + .pci_irq_fixup = maple_pci_irq_fixup, .pci_get_legacy_ide_irq = maple_pci_get_legacy_ide_irq, .restart = maple_restart, .power_off = maple_power_off, diff --git a/arch/powerpc/platforms/pasemi/pasemi.h b/arch/powerpc/platforms/pasemi/pasemi.h index fd71d72736b..51c2a2397ec 100644 --- a/arch/powerpc/platforms/pasemi/pasemi.h +++ b/arch/powerpc/platforms/pasemi/pasemi.h @@ -3,6 +3,5 @@ extern unsigned long pas_get_boot_time(void); extern void pas_pci_init(void); -extern void pas_pcibios_fixup(void); #endif /* _PASEMI_PASEMI_H */ diff --git a/arch/powerpc/platforms/pasemi/pci.c b/arch/powerpc/platforms/pasemi/pci.c index 39020c1fa13..faa618e0404 100644 --- a/arch/powerpc/platforms/pasemi/pci.c +++ b/arch/powerpc/platforms/pasemi/pci.c @@ -148,14 +148,6 @@ static int __init add_bridge(struct device_node *dev) } -void __init pas_pcibios_fixup(void) -{ - struct pci_dev *dev = NULL; - - for_each_pci_dev(dev) - pci_read_irq_line(dev); -} - static void __init pas_fixup_phb_resources(void) { struct pci_controller *hose, *tmp; diff --git a/arch/powerpc/platforms/pasemi/setup.c b/arch/powerpc/platforms/pasemi/setup.c index 106896c3b60..eb2457567f8 100644 --- a/arch/powerpc/platforms/pasemi/setup.c +++ b/arch/powerpc/platforms/pasemi/setup.c @@ -176,7 +176,6 @@ define_machine(pas) { .init_early = pas_init_early, .init_IRQ = pas_init_IRQ, .get_irq = mpic_get_irq, - .pcibios_fixup = pas_pcibios_fixup, .restart = pas_restart, .power_off = pas_power_off, .halt = pas_halt, diff --git a/arch/powerpc/platforms/powermac/pci.c b/arch/powerpc/platforms/powermac/pci.c index 257dc906846..f42475b27c1 100644 --- a/arch/powerpc/platforms/powermac/pci.c +++ b/arch/powerpc/platforms/powermac/pci.c @@ -984,30 +984,23 @@ static int __init add_bridge(struct device_node *dev) return 0; } -void __init pmac_pcibios_fixup(void) +void __devinit pmac_pci_irq_fixup(struct pci_dev *dev) { - struct pci_dev* dev = NULL; - - for_each_pci_dev(dev) { - /* Read interrupt from the device-tree */ - pci_read_irq_line(dev); - #ifdef CONFIG_PPC32 - /* Fixup interrupt for the modem/ethernet combo controller. - * on machines with a second ohare chip. - * The number in the device tree (27) is bogus (correct for - * the ethernet-only board but not the combo ethernet/modem - * board). The real interrupt is 28 on the second controller - * -> 28+32 = 60. - */ - if (has_second_ohare && - dev->vendor == PCI_VENDOR_ID_DEC && - dev->device == PCI_DEVICE_ID_DEC_TULIP_PLUS) { - dev->irq = irq_create_mapping(NULL, 60); - set_irq_type(dev->irq, IRQ_TYPE_LEVEL_LOW); - } -#endif /* CONFIG_PPC32 */ + /* Fixup interrupt for the modem/ethernet combo controller. + * on machines with a second ohare chip. + * The number in the device tree (27) is bogus (correct for + * the ethernet-only board but not the combo ethernet/modem + * board). The real interrupt is 28 on the second controller + * -> 28+32 = 60. + */ + if (has_second_ohare && + dev->vendor == PCI_VENDOR_ID_DEC && + dev->device == PCI_DEVICE_ID_DEC_TULIP_PLUS) { + dev->irq = irq_create_mapping(NULL, 60); + set_irq_type(dev->irq, IRQ_TYPE_LEVEL_LOW); } +#endif /* CONFIG_PPC32 */ } #ifdef CONFIG_PPC64 diff --git a/arch/powerpc/platforms/powermac/pmac.h b/arch/powerpc/platforms/powermac/pmac.h index 94e7b24b840..6e090a7dea8 100644 --- a/arch/powerpc/platforms/powermac/pmac.h +++ b/arch/powerpc/platforms/powermac/pmac.h @@ -20,7 +20,7 @@ extern void pmac_get_rtc_time(struct rtc_time *); extern int pmac_set_rtc_time(struct rtc_time *); extern void pmac_read_rtc_time(void); extern void pmac_calibrate_decr(void); -extern void pmac_pcibios_fixup(void); +extern void pmac_pci_irq_fixup(struct pci_dev *); extern void pmac_pci_init(void); extern unsigned long pmac_ide_get_base(int index); extern void pmac_ide_init_hwif_ports(hw_regs_t *hw, diff --git a/arch/powerpc/platforms/powermac/setup.c b/arch/powerpc/platforms/powermac/setup.c index cb1c342061e..805791d76fd 100644 --- a/arch/powerpc/platforms/powermac/setup.c +++ b/arch/powerpc/platforms/powermac/setup.c @@ -727,7 +727,7 @@ define_machine(powermac) { .show_cpuinfo = pmac_show_cpuinfo, .init_IRQ = pmac_pic_init, .get_irq = NULL, /* changed later */ - .pcibios_fixup = pmac_pcibios_fixup, + .pci_irq_fixup = pmac_pci_irq_fixup, .restart = pmac_restart, .power_off = pmac_power_off, .halt = pmac_halt, diff --git a/arch/powerpc/platforms/pseries/pci.c b/arch/powerpc/platforms/pseries/pci.c index 410a6bcc4ca..715db5c8990 100644 --- a/arch/powerpc/platforms/pseries/pci.c +++ b/arch/powerpc/platforms/pseries/pci.c @@ -29,8 +29,6 @@ #include #include -static int __devinitdata s7a_workaround = -1; - #if 0 void pcibios_name_device(struct pci_dev *dev) { @@ -57,39 +55,6 @@ void pcibios_name_device(struct pci_dev *dev) DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, pcibios_name_device); #endif -static void __devinit check_s7a(void) -{ - struct device_node *root; - const char *model; - - s7a_workaround = 0; - root = of_find_node_by_path("/"); - if (root) { - model = get_property(root, "model", NULL); - if (model && !strcmp(model, "IBM,7013-S7A")) - s7a_workaround = 1; - of_node_put(root); - } -} - -void __devinit pSeries_irq_bus_setup(struct pci_bus *bus) -{ - struct pci_dev *dev; - - if (s7a_workaround < 0) - check_s7a(); - list_for_each_entry(dev, &bus->devices, bus_list) { - pci_read_irq_line(dev); - if (s7a_workaround) { - if (dev->irq > 16) { - dev->irq -= 3; - pci_write_config_byte(dev, PCI_INTERRUPT_LINE, - dev->irq); - } - } - } -} - static void __init pSeries_request_regions(void) { if (!isa_io_base) diff --git a/arch/powerpc/platforms/pseries/setup.c b/arch/powerpc/platforms/pseries/setup.c index 89a8119f988..a8f3812aa38 100644 --- a/arch/powerpc/platforms/pseries/setup.c +++ b/arch/powerpc/platforms/pseries/setup.c @@ -553,7 +553,6 @@ define_machine(pseries) { .log_error = pSeries_log_error, .pcibios_fixup = pSeries_final_fixup, .pci_probe_mode = pSeries_pci_probe_mode, - .irq_bus_setup = pSeries_irq_bus_setup, .restart = rtas_restart, .power_off = rtas_power_off, .halt = rtas_halt, diff --git a/include/asm-powerpc/machdep.h b/include/asm-powerpc/machdep.h index dac90dc341c..3810f131901 100644 --- a/include/asm-powerpc/machdep.h +++ b/include/asm-powerpc/machdep.h @@ -86,7 +86,6 @@ struct machdep_calls { void (*tce_flush)(struct iommu_table *tbl); void (*iommu_dev_setup)(struct pci_dev *dev); void (*iommu_bus_setup)(struct pci_bus *bus); - void (*irq_bus_setup)(struct pci_bus *bus); #endif /* CONFIG_PPC64 */ int (*probe)(void); @@ -106,6 +105,7 @@ struct machdep_calls { /* Called after scanning the bus, before allocating resources */ void (*pcibios_fixup)(void); int (*pci_probe_mode)(struct pci_bus *); + void (*pci_irq_fixup)(struct pci_dev *dev); void (*restart)(char *cmd); void (*power_off)(void); diff --git a/include/asm-powerpc/ppc-pci.h b/include/asm-powerpc/ppc-pci.h index 1115756c79f..8894d1d4226 100644 --- a/include/asm-powerpc/ppc-pci.h +++ b/include/asm-powerpc/ppc-pci.h @@ -47,7 +47,6 @@ unsigned long get_phb_buid (struct device_node *); /* From pSeries_pci.h */ extern void pSeries_final_fixup(void); -extern void pSeries_irq_bus_setup(struct pci_bus *bus); extern unsigned long pci_probe_only; -- cgit v1.2.3-70-g09d2 From 69108cf00679716bcab58acb3135390654c5bb99 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Sat, 11 Nov 2006 17:24:52 +1100 Subject: [POWERPC] Remove ppc_md.pci_map_irq & ppc_swizzle for ARCH=powerpc These were inherited from ARCH=ppc, but are not needed since parsing of interrupts should be done via the of_* functions (who can do swizzling). If we ever need to do non-standard swizzling on bridges without a device-node, then we might add back a slightly different version of ppc_md.pci_swizzle but for now, that is not the case. I removed the couple of calls for these in 83xx. If that breaks something, then there is a problem with the device-tree on these. Signed-off-by: Benjamin Herrenschmidt Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/pci_32.c | 23 ----------------------- arch/powerpc/platforms/83xx/mpc832x_mds.c | 2 -- arch/powerpc/platforms/83xx/mpc8360e_pb.c | 2 -- include/asm-powerpc/machdep.h | 4 ---- 4 files changed, 31 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/kernel/pci_32.c b/arch/powerpc/kernel/pci_32.c index 853ecef8178..d32cd500d8b 100644 --- a/arch/powerpc/kernel/pci_32.c +++ b/arch/powerpc/kernel/pci_32.c @@ -1283,10 +1283,6 @@ pcibios_init(void) if (pci_assign_all_buses && have_of) pcibios_make_OF_bus_map(); - /* Do machine dependent PCI interrupt routing */ - if (ppc_md.pci_swizzle && ppc_md.pci_map_irq) - pci_fixup_irqs(ppc_md.pci_swizzle, ppc_md.pci_map_irq); - /* Call machine dependent fixup */ if (ppc_md.pcibios_fixup) ppc_md.pcibios_fixup(); @@ -1309,25 +1305,6 @@ pcibios_init(void) subsys_initcall(pcibios_init); -unsigned char __init -common_swizzle(struct pci_dev *dev, unsigned char *pinp) -{ - struct pci_controller *hose = dev->sysdata; - - if (dev->bus->number != hose->first_busno) { - u8 pin = *pinp; - do { - pin = bridge_swizzle(pin, PCI_SLOT(dev->devfn)); - /* Move up the chain of bridges. */ - dev = dev->bus->self; - } while (dev->bus->self); - *pinp = pin; - - /* The slot is the idsel of the last bridge. */ - } - return PCI_SLOT(dev->devfn); -} - unsigned long resource_fixup(struct pci_dev * dev, struct resource * res, unsigned long start, unsigned long size) { diff --git a/arch/powerpc/platforms/83xx/mpc832x_mds.c b/arch/powerpc/platforms/83xx/mpc832x_mds.c index a43ac71ab74..f58c9780b66 100644 --- a/arch/powerpc/platforms/83xx/mpc832x_mds.c +++ b/arch/powerpc/platforms/83xx/mpc832x_mds.c @@ -97,8 +97,6 @@ static void __init mpc832x_sys_setup_arch(void) #ifdef CONFIG_PCI for (np = NULL; (np = of_find_node_by_type(np, "pci")) != NULL;) add_bridge(np); - - ppc_md.pci_swizzle = common_swizzle; ppc_md.pci_exclude_device = mpc83xx_exclude_device; #endif diff --git a/arch/powerpc/platforms/83xx/mpc8360e_pb.c b/arch/powerpc/platforms/83xx/mpc8360e_pb.c index 1a523c81c06..7bfd47ad723 100644 --- a/arch/powerpc/platforms/83xx/mpc8360e_pb.c +++ b/arch/powerpc/platforms/83xx/mpc8360e_pb.c @@ -102,8 +102,6 @@ static void __init mpc8360_sys_setup_arch(void) #ifdef CONFIG_PCI for (np = NULL; (np = of_find_node_by_type(np, "pci")) != NULL;) add_bridge(np); - - ppc_md.pci_swizzle = common_swizzle; ppc_md.pci_exclude_device = mpc83xx_exclude_device; #endif diff --git a/include/asm-powerpc/machdep.h b/include/asm-powerpc/machdep.h index 3810f131901..162205f6264 100644 --- a/include/asm-powerpc/machdep.h +++ b/include/asm-powerpc/machdep.h @@ -199,10 +199,6 @@ struct machdep_calls { * Returns 0 to allow assignment/enabling of the device. */ int (*pcibios_enable_device_hook)(struct pci_dev *, int initial); - /* For interrupt routing */ - unsigned char (*pci_swizzle)(struct pci_dev *, unsigned char *); - int (*pci_map_irq)(struct pci_dev *, unsigned char, unsigned char); - /* Called in indirect_* to avoid touching devices */ int (*pci_exclude_device)(unsigned char, unsigned char); -- cgit v1.2.3-70-g09d2 From 4c75a6f441cdd1c69a6c173bc7944e12c2ba6f84 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Sat, 11 Nov 2006 17:24:53 +1100 Subject: [POWERPC] Generic DCR infrastructure This patch adds new dcr_map/dcr_read/dcr_write accessors for DCRs that can be used by drivers to transparently address either native DCRs or memory mapped DCRs. The implementation for memory mapped DCRs is done after the binding being currently worked on for SLOF and the Axon chipset. This patch enables it for the cell native platform Signed-off-by: Benjamin Herrenschmidt Signed-off-by: Paul Mackerras --- arch/powerpc/Kconfig | 16 +++++ arch/powerpc/kernel/Makefile | 1 + arch/powerpc/sysdev/Makefile | 3 +- arch/powerpc/sysdev/dcr-low.S | 39 +++++++++++ arch/powerpc/sysdev/dcr.c | 137 +++++++++++++++++++++++++++++++++++++++ arch/ppc/Kconfig | 11 ++++ include/asm-powerpc/dcr-mmio.h | 51 +++++++++++++++ include/asm-powerpc/dcr-native.h | 39 +++++++++++ include/asm-powerpc/dcr.h | 42 ++++++++++++ 9 files changed, 337 insertions(+), 2 deletions(-) create mode 100644 arch/powerpc/sysdev/dcr-low.S create mode 100644 arch/powerpc/sysdev/dcr.c create mode 100644 include/asm-powerpc/dcr-mmio.h create mode 100644 include/asm-powerpc/dcr-native.h create mode 100644 include/asm-powerpc/dcr.h (limited to 'arch/powerpc') diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index 96316c86610..0e564d30fc4 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -160,9 +160,11 @@ config PPC_86xx config 40x bool "AMCC 40x" + select PPC_DCR_NATIVE config 44x bool "AMCC 44x" + select PPC_DCR_NATIVE config 8xx bool "Freescale 8xx" @@ -208,6 +210,19 @@ config PPC_FPU bool default y if PPC64 +config PPC_DCR_NATIVE + bool + default n + +config PPC_DCR_MMIO + bool + default n + +config PPC_DCR + bool + depends on PPC_DCR_NATIVE || PPC_DCR_MMIO + default y + config BOOKE bool depends on E200 || E500 @@ -453,6 +468,7 @@ config PPC_CELL config PPC_CELL_NATIVE bool select PPC_CELL + select PPC_DCR_MMIO default n config PPC_IBM_CELL_BLADE diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile index d8240ce2212..f34d158b962 100644 --- a/arch/powerpc/kernel/Makefile +++ b/arch/powerpc/kernel/Makefile @@ -58,6 +58,7 @@ obj-$(CONFIG_BOOTX_TEXT) += btext.o obj-$(CONFIG_SMP) += smp.o obj-$(CONFIG_KPROBES) += kprobes.o obj-$(CONFIG_PPC_UDBG_16550) += legacy_serial.o udbg_16550.o + module-$(CONFIG_PPC64) += module_64.o obj-$(CONFIG_MODULES) += $(module-y) diff --git a/arch/powerpc/sysdev/Makefile b/arch/powerpc/sysdev/Makefile index 5b87f7b42a1..8ba11ab5e61 100644 --- a/arch/powerpc/sysdev/Makefile +++ b/arch/powerpc/sysdev/Makefile @@ -5,8 +5,7 @@ endif obj-$(CONFIG_MPIC) += mpic.o obj-$(CONFIG_PPC_INDIRECT_PCI) += indirect_pci.o obj-$(CONFIG_PPC_MPC106) += grackle.o -obj-$(CONFIG_BOOKE) += dcr.o -obj-$(CONFIG_40x) += dcr.o +obj-$(CONFIG_PPC_DCR) += dcr.o dcr-low.o obj-$(CONFIG_U3_DART) += dart_iommu.o obj-$(CONFIG_MMIO_NVRAM) += mmio_nvram.o obj-$(CONFIG_FSL_SOC) += fsl_soc.o diff --git a/arch/powerpc/sysdev/dcr-low.S b/arch/powerpc/sysdev/dcr-low.S new file mode 100644 index 00000000000..2078f39e2f1 --- /dev/null +++ b/arch/powerpc/sysdev/dcr-low.S @@ -0,0 +1,39 @@ +/* + * "Indirect" DCR access + * + * Copyright (c) 2004 Eugene Surovegin + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include +#include + +#define DCR_ACCESS_PROLOG(table) \ + rlwinm r3,r3,4,18,27; \ + lis r5,table@h; \ + ori r5,r5,table@l; \ + add r3,r3,r5; \ + mtctr r3; \ + bctr + +_GLOBAL(__mfdcr) + DCR_ACCESS_PROLOG(__mfdcr_table) + +_GLOBAL(__mtdcr) + DCR_ACCESS_PROLOG(__mtdcr_table) + +__mfdcr_table: + mfdcr r3,0; blr +__mtdcr_table: + mtdcr 0,r4; blr + +dcr = 1 + .rept 1023 + mfdcr r3,dcr; blr + mtdcr dcr,r4; blr + dcr = dcr + 1 + .endr diff --git a/arch/powerpc/sysdev/dcr.c b/arch/powerpc/sysdev/dcr.c new file mode 100644 index 00000000000..dffeeaeca1d --- /dev/null +++ b/arch/powerpc/sysdev/dcr.c @@ -0,0 +1,137 @@ +/* + * (c) Copyright 2006 Benjamin Herrenschmidt, IBM Corp. + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#undef DEBUG + +#include +#include +#include + +unsigned int dcr_resource_start(struct device_node *np, unsigned int index) +{ + unsigned int ds; + const u32 *dr = get_property(np, "dcr-reg", &ds); + + if (dr == NULL || ds & 1 || index >= (ds / 8)) + return 0; + + return dr[index * 2]; +} + +unsigned int dcr_resource_len(struct device_node *np, unsigned int index) +{ + unsigned int ds; + const u32 *dr = get_property(np, "dcr-reg", &ds); + + if (dr == NULL || ds & 1 || index >= (ds / 8)) + return 0; + + return dr[index * 2 + 1]; +} + +#ifndef CONFIG_PPC_DCR_NATIVE + +static struct device_node * find_dcr_parent(struct device_node * node) +{ + struct device_node *par, *tmp; + const u32 *p; + + for (par = of_node_get(node); par;) { + if (get_property(par, "dcr-controller", NULL)) + break; + p = get_property(par, "dcr-parent", NULL); + tmp = par; + if (p == NULL) + par = of_get_parent(par); + else + par = of_find_node_by_phandle(*p); + of_node_put(tmp); + } + return par; +} + +u64 of_translate_dcr_address(struct device_node *dev, + unsigned int dcr_n, + unsigned int *out_stride) +{ + struct device_node *dp; + const u32 *p; + unsigned int stride; + u64 ret; + + dp = find_dcr_parent(dev); + if (dp == NULL) + return OF_BAD_ADDR; + + /* Stride is not properly defined yet, default to 0x10 for Axon */ + p = get_property(dp, "dcr-mmio-stride", NULL); + stride = (p == NULL) ? 0x10 : *p; + + /* XXX FIXME: Which property name is to use of the 2 following ? */ + p = get_property(dp, "dcr-mmio-range", NULL); + if (p == NULL) + p = get_property(dp, "dcr-mmio-space", NULL); + if (p == NULL) + return OF_BAD_ADDR; + + /* Maybe could do some better range checking here */ + ret = of_translate_address(dp, p); + if (ret != OF_BAD_ADDR) + ret += (u64)(stride) * (u64)dcr_n; + if (out_stride) + *out_stride = stride; + return ret; +} + +dcr_host_t dcr_map(struct device_node *dev, unsigned int dcr_n, + unsigned int dcr_c) +{ + dcr_host_t ret = { .token = NULL, .stride = 0 }; + u64 addr; + + pr_debug("dcr_map(%s, 0x%x, 0x%x)\n", + dev->full_name, dcr_n, dcr_c); + + addr = of_translate_dcr_address(dev, dcr_n, &ret.stride); + pr_debug("translates to addr: 0x%lx, stride: 0x%x\n", + addr, ret.stride); + if (addr == OF_BAD_ADDR) + return ret; + pr_debug("mapping 0x%x bytes\n", dcr_c * ret.stride); + ret.token = ioremap(addr, dcr_c * ret.stride); + if (ret.token == NULL) + return ret; + pr_debug("mapped at 0x%p -> base is 0x%p\n", + ret.token, ret.token - dcr_n * ret.stride); + ret.token -= dcr_n * ret.stride; + return ret; +} + +void dcr_unmap(dcr_host_t host, unsigned int dcr_n, unsigned int dcr_c) +{ + dcr_host_t h = host; + + if (h.token == NULL) + return; + h.token -= dcr_n * h.stride; + iounmap(h.token); + h.token = NULL; +} + +#endif /* !defined(CONFIG_PPC_DCR_NATIVE) */ diff --git a/arch/ppc/Kconfig b/arch/ppc/Kconfig index ef018e25fb0..edf71a4ecc9 100644 --- a/arch/ppc/Kconfig +++ b/arch/ppc/Kconfig @@ -77,9 +77,11 @@ config 6xx config 40x bool "40x" + select PPC_DCR_NATIVE config 44x bool "44x" + select PPC_DCR_NATIVE config 8xx bool "8xx" @@ -95,6 +97,15 @@ endchoice config PPC_FPU bool +config PPC_DCR_NATIVE + bool + default n + +config PPC_DCR + bool + depends on PPC_DCR_NATIVE + default y + config BOOKE bool depends on E200 || E500 diff --git a/include/asm-powerpc/dcr-mmio.h b/include/asm-powerpc/dcr-mmio.h new file mode 100644 index 00000000000..5dbfca8dde3 --- /dev/null +++ b/include/asm-powerpc/dcr-mmio.h @@ -0,0 +1,51 @@ +/* + * (c) Copyright 2006 Benjamin Herrenschmidt, IBM Corp. + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef _ASM_POWERPC_DCR_MMIO_H +#define _ASM_POWERPC_DCR_MMIO_H +#ifdef __KERNEL__ + +#include + +typedef struct { void __iomem *token; unsigned int stride; } dcr_host_t; + +#define DCR_MAP_OK(host) ((host).token != NULL) + +extern dcr_host_t dcr_map(struct device_node *dev, unsigned int dcr_n, + unsigned int dcr_c); +extern void dcr_unmap(dcr_host_t host, unsigned int dcr_n, unsigned int dcr_c); + +static inline u32 dcr_read(dcr_host_t host, unsigned int dcr_n) +{ + return in_be32(host.token + dcr_n * host.stride); +} + +static inline void dcr_write(dcr_host_t host, unsigned int dcr_n, u32 value) +{ + out_be32(host.token + dcr_n * host.stride, value); +} + +extern u64 of_translate_dcr_address(struct device_node *dev, + unsigned int dcr_n, + unsigned int *stride); + +#endif /* __KERNEL__ */ +#endif /* _ASM_POWERPC_DCR_MMIO_H */ + + diff --git a/include/asm-powerpc/dcr-native.h b/include/asm-powerpc/dcr-native.h new file mode 100644 index 00000000000..fd4a5f5e33d --- /dev/null +++ b/include/asm-powerpc/dcr-native.h @@ -0,0 +1,39 @@ +/* + * (c) Copyright 2006 Benjamin Herrenschmidt, IBM Corp. + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef _ASM_POWERPC_DCR_NATIVE_H +#define _ASM_POWERPC_DCR_NATIVE_H +#ifdef __KERNEL__ + +#include + +typedef struct {} dcr_host_t; + +#define DCR_MAP_OK(host) (1) + +#define dcr_map(dev, dcr_n, dcr_c) {} +#define dcr_unmap(host, dcr_n, dcr_c) {} +#define dcr_read(host, dcr_n) mfdcr(dcr_n) +#define dcr_write(host, dcr_n, value) mtdcr(dcr_n, value) + + +#endif /* __KERNEL__ */ +#endif /* _ASM_POWERPC_DCR_NATIVE_H */ + + diff --git a/include/asm-powerpc/dcr.h b/include/asm-powerpc/dcr.h new file mode 100644 index 00000000000..473f2c7fd89 --- /dev/null +++ b/include/asm-powerpc/dcr.h @@ -0,0 +1,42 @@ +/* + * (c) Copyright 2006 Benjamin Herrenschmidt, IBM Corp. + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef _ASM_POWERPC_DCR_H +#define _ASM_POWERPC_DCR_H +#ifdef __KERNEL__ + +#ifdef CONFIG_PPC_DCR_NATIVE +#include +#else +#include +#endif + +/* + * On CONFIG_PPC_MERGE, we have additional helpers to read the DCR + * base from the device-tree + */ +#ifdef CONFIG_PPC_MERGE +extern unsigned int dcr_resource_start(struct device_node *np, + unsigned int index); +extern unsigned int dcr_resource_len(struct device_node *np, + unsigned int index); +#endif /* CONFIG_PPC_MERGE */ + +#endif /* __KERNEL__ */ +#endif /* _ASM_POWERPC_DCR_H */ -- cgit v1.2.3-70-g09d2 From fbf0274e43b7e17ee740fee2d693932be093d56d Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Sat, 11 Nov 2006 17:24:55 +1100 Subject: [POWERPC] Support for DCR based MPIC This patch implements support for DCR based MPIC implementations. Such implementations have the MPIC_USES_DCR flag set and don't use the phys_addr argument of mpic_alloc (they require a valid dcr mapping in the device node) This version of the patch can use a little bif of cleanup still (I can probably consolidate rb->dbase/doff, at least once I'm sure on how the hardware is actually supposed to work vs. possible simulator issues) and it should be possible to build a DCR-only version of the driver. I need to cleanup a bit the CONFIG_* handling for that and probably introduce CONFIG_MPIC_MMIO and CONFIG_MPIC_DCR. Signed-off-by: Benjamin Herrenschmidt Signed-off-by: Paul Mackerras --- arch/powerpc/sysdev/mpic.c | 136 +++++++++++++++++++++++++++++++++------------ include/asm-powerpc/mpic.h | 35 ++++++++++-- 2 files changed, 131 insertions(+), 40 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/sysdev/mpic.c b/arch/powerpc/sysdev/mpic.c index ba4833f57d4..909306ca04f 100644 --- a/arch/powerpc/sysdev/mpic.c +++ b/arch/powerpc/sysdev/mpic.c @@ -147,33 +147,51 @@ static u32 mpic_infos[][MPIC_IDX_END] = { */ -static inline u32 _mpic_read(unsigned int be, volatile u32 __iomem *base, - unsigned int reg) +static inline u32 _mpic_read(enum mpic_reg_type type, + struct mpic_reg_bank *rb, + unsigned int reg) { - if (be) - return in_be32(base + (reg >> 2)); - else - return in_le32(base + (reg >> 2)); + switch(type) { +#ifdef CONFIG_PPC_DCR + case mpic_access_dcr: + return dcr_read(rb->dhost, + rb->dbase + reg + rb->doff); +#endif + case mpic_access_mmio_be: + return in_be32(rb->base + (reg >> 2)); + case mpic_access_mmio_le: + default: + return in_le32(rb->base + (reg >> 2)); + } } -static inline void _mpic_write(unsigned int be, volatile u32 __iomem *base, - unsigned int reg, u32 value) +static inline void _mpic_write(enum mpic_reg_type type, + struct mpic_reg_bank *rb, + unsigned int reg, u32 value) { - if (be) - out_be32(base + (reg >> 2), value); - else - out_le32(base + (reg >> 2), value); + switch(type) { +#ifdef CONFIG_PPC_DCR + case mpic_access_dcr: + return dcr_write(rb->dhost, + rb->dbase + reg + rb->doff, value); +#endif + case mpic_access_mmio_be: + return out_be32(rb->base + (reg >> 2), value); + case mpic_access_mmio_le: + default: + return out_le32(rb->base + (reg >> 2), value); + } } static inline u32 _mpic_ipi_read(struct mpic *mpic, unsigned int ipi) { - unsigned int be = (mpic->flags & MPIC_BIG_ENDIAN) != 0; + enum mpic_reg_type type = mpic->reg_type; unsigned int offset = MPIC_INFO(GREG_IPI_VECTOR_PRI_0) + (ipi * MPIC_INFO(GREG_IPI_STRIDE)); - if (mpic->flags & MPIC_BROKEN_IPI) - be = !be; - return _mpic_read(be, mpic->gregs, offset); + if ((mpic->flags & MPIC_BROKEN_IPI) && type == mpic_access_mmio_le) + type = mpic_access_mmio_be; + return _mpic_read(type, &mpic->gregs, offset); } static inline void _mpic_ipi_write(struct mpic *mpic, unsigned int ipi, u32 value) @@ -181,7 +199,7 @@ static inline void _mpic_ipi_write(struct mpic *mpic, unsigned int ipi, u32 valu unsigned int offset = MPIC_INFO(GREG_IPI_VECTOR_PRI_0) + (ipi * MPIC_INFO(GREG_IPI_STRIDE)); - _mpic_write(mpic->flags & MPIC_BIG_ENDIAN, mpic->gregs, offset, value); + _mpic_write(mpic->reg_type, &mpic->gregs, offset, value); } static inline u32 _mpic_cpu_read(struct mpic *mpic, unsigned int reg) @@ -190,8 +208,7 @@ static inline u32 _mpic_cpu_read(struct mpic *mpic, unsigned int reg) if (mpic->flags & MPIC_PRIMARY) cpu = hard_smp_processor_id(); - return _mpic_read(mpic->flags & MPIC_BIG_ENDIAN, - mpic->cpuregs[cpu], reg); + return _mpic_read(mpic->reg_type, &mpic->cpuregs[cpu], reg); } static inline void _mpic_cpu_write(struct mpic *mpic, unsigned int reg, u32 value) @@ -201,7 +218,7 @@ static inline void _mpic_cpu_write(struct mpic *mpic, unsigned int reg, u32 valu if (mpic->flags & MPIC_PRIMARY) cpu = hard_smp_processor_id(); - _mpic_write(mpic->flags & MPIC_BIG_ENDIAN, mpic->cpuregs[cpu], reg, value); + _mpic_write(mpic->reg_type, &mpic->cpuregs[cpu], reg, value); } static inline u32 _mpic_irq_read(struct mpic *mpic, unsigned int src_no, unsigned int reg) @@ -209,7 +226,7 @@ static inline u32 _mpic_irq_read(struct mpic *mpic, unsigned int src_no, unsigne unsigned int isu = src_no >> mpic->isu_shift; unsigned int idx = src_no & mpic->isu_mask; - return _mpic_read(mpic->flags & MPIC_BIG_ENDIAN, mpic->isus[isu], + return _mpic_read(mpic->reg_type, &mpic->isus[isu], reg + (idx * MPIC_INFO(IRQ_STRIDE))); } @@ -219,12 +236,12 @@ static inline void _mpic_irq_write(struct mpic *mpic, unsigned int src_no, unsigned int isu = src_no >> mpic->isu_shift; unsigned int idx = src_no & mpic->isu_mask; - _mpic_write(mpic->flags & MPIC_BIG_ENDIAN, mpic->isus[isu], + _mpic_write(mpic->reg_type, &mpic->isus[isu], reg + (idx * MPIC_INFO(IRQ_STRIDE)), value); } -#define mpic_read(b,r) _mpic_read(mpic->flags & MPIC_BIG_ENDIAN,(b),(r)) -#define mpic_write(b,r,v) _mpic_write(mpic->flags & MPIC_BIG_ENDIAN,(b),(r),(v)) +#define mpic_read(b,r) _mpic_read(mpic->reg_type,&(b),(r)) +#define mpic_write(b,r,v) _mpic_write(mpic->reg_type,&(b),(r),(v)) #define mpic_ipi_read(i) _mpic_ipi_read(mpic,(i)) #define mpic_ipi_write(i,v) _mpic_ipi_write(mpic,(i),(v)) #define mpic_cpu_read(i) _mpic_cpu_read(mpic,(i)) @@ -238,6 +255,38 @@ static inline void _mpic_irq_write(struct mpic *mpic, unsigned int src_no, */ +static void _mpic_map_mmio(struct mpic *mpic, unsigned long phys_addr, + struct mpic_reg_bank *rb, unsigned int offset, + unsigned int size) +{ + rb->base = ioremap(phys_addr + offset, size); + BUG_ON(rb->base == NULL); +} + +#ifdef CONFIG_PPC_DCR +static void _mpic_map_dcr(struct mpic *mpic, struct mpic_reg_bank *rb, + unsigned int offset, unsigned int size) +{ + rb->dbase = mpic->dcr_base; + rb->doff = offset; + rb->dhost = dcr_map(mpic->of_node, rb->dbase + rb->doff, size); + BUG_ON(!DCR_MAP_OK(rb->dhost)); +} + +static inline void mpic_map(struct mpic *mpic, unsigned long phys_addr, + struct mpic_reg_bank *rb, unsigned int offset, + unsigned int size) +{ + if (mpic->flags & MPIC_USES_DCR) + _mpic_map_dcr(mpic, rb, offset, size); + else + _mpic_map_mmio(mpic, phys_addr, rb, offset, size); +} +#else /* CONFIG_PPC_DCR */ +#define mpic_map(m,p,b,o,s) _mpic_map_mmio(m,p,b,o,s) +#endif /* !CONFIG_PPC_DCR */ + + /* Check if we have one of those nice broken MPICs with a flipped endian on * reads from IPI registers @@ -883,6 +932,7 @@ struct mpic * __init mpic_alloc(struct device_node *node, if (flags & MPIC_PRIMARY) mpic->hc_ht_irq.set_affinity = mpic_set_affinity; #endif /* CONFIG_MPIC_BROKEN_U3 */ + #ifdef CONFIG_SMP mpic->hc_ipi = mpic_ipi_chip; mpic->hc_ipi.typename = name; @@ -897,11 +947,26 @@ struct mpic * __init mpic_alloc(struct device_node *node, mpic->hw_set = mpic_infos[MPIC_GET_REGSET(flags)]; #endif + /* default register type */ + mpic->reg_type = (flags & MPIC_BIG_ENDIAN) ? + mpic_access_mmio_be : mpic_access_mmio_le; + +#ifdef CONFIG_PPC_DCR + if (mpic->flags & MPIC_USES_DCR) { + const u32 *dbasep; + BUG_ON(mpic->of_node == NULL); + dbasep = get_property(mpic->of_node, "dcr-reg", NULL); + BUG_ON(dbasep == NULL); + mpic->dcr_base = *dbasep; + mpic->reg_type = mpic_access_dcr; + } +#else + BUG_ON (mpic->flags & MPIC_USES_DCR); +#endif /* CONFIG_PPC_DCR */ + /* Map the global registers */ - mpic->gregs = ioremap(phys_addr + MPIC_INFO(GREG_BASE), 0x1000); - mpic->tmregs = mpic->gregs + - ((MPIC_INFO(TIMER_BASE) - MPIC_INFO(GREG_BASE)) >> 2); - BUG_ON(mpic->gregs == NULL); + mpic_map(mpic, phys_addr, &mpic->gregs, MPIC_INFO(GREG_BASE), 0x1000); + mpic_map(mpic, phys_addr, &mpic->tmregs, MPIC_INFO(TIMER_BASE), 0x1000); /* Reset */ if (flags & MPIC_WANTS_RESET) { @@ -926,17 +991,16 @@ struct mpic * __init mpic_alloc(struct device_node *node, /* Map the per-CPU registers */ for (i = 0; i < mpic->num_cpus; i++) { - mpic->cpuregs[i] = ioremap(phys_addr + MPIC_INFO(CPU_BASE) + - i * MPIC_INFO(CPU_STRIDE), 0x1000); - BUG_ON(mpic->cpuregs[i] == NULL); + mpic_map(mpic, phys_addr, &mpic->cpuregs[i], + MPIC_INFO(CPU_BASE) + i * MPIC_INFO(CPU_STRIDE), + 0x1000); } /* Initialize main ISU if none provided */ if (mpic->isu_size == 0) { mpic->isu_size = mpic->num_sources; - mpic->isus[0] = ioremap(phys_addr + MPIC_INFO(IRQ_BASE), - MPIC_INFO(IRQ_STRIDE) * mpic->isu_size); - BUG_ON(mpic->isus[0] == NULL); + mpic_map(mpic, phys_addr, &mpic->isus[0], + MPIC_INFO(IRQ_BASE), MPIC_INFO(IRQ_STRIDE) * mpic->isu_size); } mpic->isu_shift = 1 + __ilog2(mpic->isu_size - 1); mpic->isu_mask = (1 << mpic->isu_shift) - 1; @@ -979,8 +1043,8 @@ void __init mpic_assign_isu(struct mpic *mpic, unsigned int isu_num, BUG_ON(isu_num >= MPIC_MAX_ISU); - mpic->isus[isu_num] = ioremap(phys_addr, - MPIC_INFO(IRQ_STRIDE) * mpic->isu_size); + mpic_map(mpic, phys_addr, &mpic->isus[isu_num], 0, + MPIC_INFO(IRQ_STRIDE) * mpic->isu_size); if ((isu_first + mpic->isu_size) > mpic->num_sources) mpic->num_sources = isu_first + mpic->isu_size; } diff --git a/include/asm-powerpc/mpic.h b/include/asm-powerpc/mpic.h index ef0a5458d2b..ad989d182fb 100644 --- a/include/asm-powerpc/mpic.h +++ b/include/asm-powerpc/mpic.h @@ -3,6 +3,7 @@ #ifdef __KERNEL__ #include +#include /* * Global registers @@ -225,6 +226,23 @@ struct mpic_irq_fixup #endif /* CONFIG_MPIC_BROKEN_U3 */ +enum mpic_reg_type { + mpic_access_mmio_le, + mpic_access_mmio_be, +#ifdef CONFIG_PPC_DCR + mpic_access_dcr +#endif +}; + +struct mpic_reg_bank { + u32 __iomem *base; +#ifdef CONFIG_PPC_DCR + dcr_host_t dhost; + unsigned int dbase; + unsigned int doff; +#endif /* CONFIG_PPC_DCR */ +}; + /* The instance data of a given MPIC */ struct mpic { @@ -264,11 +282,18 @@ struct mpic spinlock_t fixup_lock; #endif + /* Register access method */ + enum mpic_reg_type reg_type; + /* The various ioremap'ed bases */ - volatile u32 __iomem *gregs; - volatile u32 __iomem *tmregs; - volatile u32 __iomem *cpuregs[MPIC_MAX_CPUS]; - volatile u32 __iomem *isus[MPIC_MAX_ISU]; + struct mpic_reg_bank gregs; + struct mpic_reg_bank tmregs; + struct mpic_reg_bank cpuregs[MPIC_MAX_CPUS]; + struct mpic_reg_bank isus[MPIC_MAX_ISU]; + +#ifdef CONFIG_PPC_DCR + unsigned int dcr_base; +#endif #ifdef CONFIG_MPIC_WEIRD /* Pointer to HW info array */ @@ -305,6 +330,8 @@ struct mpic #define MPIC_SPV_EOI 0x00000020 /* No passthrough disable */ #define MPIC_NO_PTHROU_DIS 0x00000040 +/* DCR based MPIC */ +#define MPIC_USES_DCR 0x00000080 /* MPIC HW modification ID */ #define MPIC_REGSET_MASK 0xf0000000 -- cgit v1.2.3-70-g09d2 From a959ff56bbf07954ea4fa1cf72f99a38795eadb3 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Sat, 11 Nov 2006 17:24:56 +1100 Subject: [POWERPC] Improve MPIC driver auto-configuration from DT This patch applies on top of the MPIC DCR support. It makes the MPIC driver capable of a lot more auto-configuration based on the device-tree, for example, it can retreive it's own physical address if not passed as an argument, find out if it's DCR or MMIO mapped, and set the BIG_ENDIAN flag automatically in the presence of a "big-endian" property in the device-tree node. Signed-off-by: Benjamin Herrenschmidt Signed-off-by: Paul Mackerras --- arch/powerpc/sysdev/mpic.c | 50 ++++++++++++++++++++++++++++++++++------------ include/asm-powerpc/mpic.h | 4 ++-- 2 files changed, 39 insertions(+), 15 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/sysdev/mpic.c b/arch/powerpc/sysdev/mpic.c index 909306ca04f..411480d5c62 100644 --- a/arch/powerpc/sysdev/mpic.c +++ b/arch/powerpc/sysdev/mpic.c @@ -894,7 +894,7 @@ static struct irq_host_ops mpic_host_ops = { */ struct mpic * __init mpic_alloc(struct device_node *node, - unsigned long phys_addr, + phys_addr_t phys_addr, unsigned int flags, unsigned int isu_size, unsigned int irq_count, @@ -904,6 +904,7 @@ struct mpic * __init mpic_alloc(struct device_node *node, u32 reg; const char *vers; int i; + u64 paddr = phys_addr; mpic = alloc_bootmem(sizeof(struct mpic)); if (mpic == NULL) @@ -943,6 +944,11 @@ struct mpic * __init mpic_alloc(struct device_node *node, mpic->irq_count = irq_count; mpic->num_sources = 0; /* so far */ + /* Check for "big-endian" in device-tree */ + if (node && get_property(node, "big-endian", NULL) != NULL) + mpic->flags |= MPIC_BIG_ENDIAN; + + #ifdef CONFIG_MPIC_WEIRD mpic->hw_set = mpic_infos[MPIC_GET_REGSET(flags)]; #endif @@ -951,11 +957,17 @@ struct mpic * __init mpic_alloc(struct device_node *node, mpic->reg_type = (flags & MPIC_BIG_ENDIAN) ? mpic_access_mmio_be : mpic_access_mmio_le; + /* If no physical address is passed in, a device-node is mandatory */ + BUG_ON(paddr == 0 && node == NULL); + + /* If no physical address passed in, check if it's dcr based */ + if (paddr == 0 && get_property(node, "dcr-reg", NULL) != NULL) + mpic->flags |= MPIC_USES_DCR; + #ifdef CONFIG_PPC_DCR if (mpic->flags & MPIC_USES_DCR) { const u32 *dbasep; - BUG_ON(mpic->of_node == NULL); - dbasep = get_property(mpic->of_node, "dcr-reg", NULL); + dbasep = get_property(node, "dcr-reg", NULL); BUG_ON(dbasep == NULL); mpic->dcr_base = *dbasep; mpic->reg_type = mpic_access_dcr; @@ -964,9 +976,20 @@ struct mpic * __init mpic_alloc(struct device_node *node, BUG_ON (mpic->flags & MPIC_USES_DCR); #endif /* CONFIG_PPC_DCR */ + /* If the MPIC is not DCR based, and no physical address was passed + * in, try to obtain one + */ + if (paddr == 0 && !(mpic->flags & MPIC_USES_DCR)) { + const u32 *reg; + reg = get_property(node, "reg", NULL); + BUG_ON(reg == NULL); + paddr = of_translate_address(node, reg); + BUG_ON(paddr == OF_BAD_ADDR); + } + /* Map the global registers */ - mpic_map(mpic, phys_addr, &mpic->gregs, MPIC_INFO(GREG_BASE), 0x1000); - mpic_map(mpic, phys_addr, &mpic->tmregs, MPIC_INFO(TIMER_BASE), 0x1000); + mpic_map(mpic, paddr, &mpic->gregs, MPIC_INFO(GREG_BASE), 0x1000); + mpic_map(mpic, paddr, &mpic->tmregs, MPIC_INFO(TIMER_BASE), 0x1000); /* Reset */ if (flags & MPIC_WANTS_RESET) { @@ -991,7 +1014,7 @@ struct mpic * __init mpic_alloc(struct device_node *node, /* Map the per-CPU registers */ for (i = 0; i < mpic->num_cpus; i++) { - mpic_map(mpic, phys_addr, &mpic->cpuregs[i], + mpic_map(mpic, paddr, &mpic->cpuregs[i], MPIC_INFO(CPU_BASE) + i * MPIC_INFO(CPU_STRIDE), 0x1000); } @@ -999,7 +1022,7 @@ struct mpic * __init mpic_alloc(struct device_node *node, /* Initialize main ISU if none provided */ if (mpic->isu_size == 0) { mpic->isu_size = mpic->num_sources; - mpic_map(mpic, phys_addr, &mpic->isus[0], + mpic_map(mpic, paddr, &mpic->isus[0], MPIC_INFO(IRQ_BASE), MPIC_INFO(IRQ_STRIDE) * mpic->isu_size); } mpic->isu_shift = 1 + __ilog2(mpic->isu_size - 1); @@ -1020,10 +1043,11 @@ struct mpic * __init mpic_alloc(struct device_node *node, vers = ""; break; } - printk(KERN_INFO "mpic: Setting up MPIC \"%s\" version %s at %lx, max %d CPUs\n", - name, vers, phys_addr, mpic->num_cpus); - printk(KERN_INFO "mpic: ISU size: %d, shift: %d, mask: %x\n", mpic->isu_size, - mpic->isu_shift, mpic->isu_mask); + printk(KERN_INFO "mpic: Setting up MPIC \"%s\" version %s at %llx," + " max %d CPUs\n", + name, vers, (unsigned long long)paddr, mpic->num_cpus); + printk(KERN_INFO "mpic: ISU size: %d, shift: %d, mask: %x\n", + mpic->isu_size, mpic->isu_shift, mpic->isu_mask); mpic->next = mpics; mpics = mpic; @@ -1037,13 +1061,13 @@ struct mpic * __init mpic_alloc(struct device_node *node, } void __init mpic_assign_isu(struct mpic *mpic, unsigned int isu_num, - unsigned long phys_addr) + phys_addr_t paddr) { unsigned int isu_first = isu_num * mpic->isu_size; BUG_ON(isu_num >= MPIC_MAX_ISU); - mpic_map(mpic, phys_addr, &mpic->isus[isu_num], 0, + mpic_map(mpic, paddr, &mpic->isus[isu_num], 0, MPIC_INFO(IRQ_STRIDE) * mpic->isu_size); if ((isu_first + mpic->isu_size) > mpic->num_sources) mpic->num_sources = isu_first + mpic->isu_size; diff --git a/include/asm-powerpc/mpic.h b/include/asm-powerpc/mpic.h index ad989d182fb..b71e7b32a55 100644 --- a/include/asm-powerpc/mpic.h +++ b/include/asm-powerpc/mpic.h @@ -364,7 +364,7 @@ struct mpic * that is senses[0] correspond to linux irq "irq_offset". */ extern struct mpic *mpic_alloc(struct device_node *node, - unsigned long phys_addr, + phys_addr_t phys_addr, unsigned int flags, unsigned int isu_size, unsigned int irq_count, @@ -377,7 +377,7 @@ extern struct mpic *mpic_alloc(struct device_node *node, * @phys_addr: physical address of the ISU */ extern void mpic_assign_isu(struct mpic *mpic, unsigned int isu_num, - unsigned long phys_addr); + phys_addr_t phys_addr); /* Set default sense codes * -- cgit v1.2.3-70-g09d2 From 21fb5a1d9f554970c680b801ba32184bc7c34aa0 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Sat, 11 Nov 2006 17:24:58 +1100 Subject: [POWERPC] Native cell support for MPIC in southbridge Add support for southbridges using the MPIC interrupt controller to the native cell platforms. Signed-off-by: Benjamin Herrenschmidt Signed-off-by: Paul Mackerras --- arch/powerpc/Kconfig | 1 + arch/powerpc/platforms/cell/setup.c | 44 +++++++++++++++++++++++++++++++++++++ 2 files changed, 45 insertions(+) (limited to 'arch/powerpc') diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index 0e564d30fc4..65588a6bd2f 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -469,6 +469,7 @@ config PPC_CELL_NATIVE bool select PPC_CELL select PPC_DCR_MMIO + select MPIC default n config PPC_IBM_CELL_BLADE diff --git a/arch/powerpc/platforms/cell/setup.c b/arch/powerpc/platforms/cell/setup.c index 1944bb413f0..13f628def36 100644 --- a/arch/powerpc/platforms/cell/setup.c +++ b/arch/powerpc/platforms/cell/setup.c @@ -50,6 +50,7 @@ #include #include #include +#include #include "interrupt.h" #include "iommu.h" @@ -80,10 +81,53 @@ static void cell_progress(char *s, unsigned short hex) printk("*** %04x : %s\n", hex, s ? s : ""); } +static void cell_mpic_cascade(unsigned int irq, struct irq_desc *desc) +{ + struct mpic *mpic = desc->handler_data; + unsigned int virq; + + virq = mpic_get_one_irq(mpic); + if (virq != NO_IRQ) + generic_handle_irq(virq); + desc->chip->eoi(irq); +} + +static void __init mpic_init_IRQ(void) +{ + struct device_node *dn; + struct mpic *mpic; + unsigned int virq; + + for (dn = NULL; + (dn = of_find_node_by_name(dn, "interrupt-controller"));) { + if (!device_is_compatible(dn, "CBEA,platform-open-pic")) + continue; + + /* The MPIC driver will get everything it needs from the + * device-tree, just pass 0 to all arguments + */ + mpic = mpic_alloc(dn, 0, 0, 0, 0, " MPIC "); + if (mpic == NULL) + continue; + mpic_init(mpic); + + virq = irq_of_parse_and_map(dn, 0); + if (virq == NO_IRQ) + continue; + + printk(KERN_INFO "%s : hooking up to IRQ %d\n", + dn->full_name, virq); + set_irq_data(virq, mpic); + set_irq_chained_handler(virq, cell_mpic_cascade); + } +} + + static void __init cell_init_irq(void) { iic_init_IRQ(); spider_init_IRQ(); + mpic_init_IRQ(); } static void __init cell_setup_arch(void) -- cgit v1.2.3-70-g09d2 From 7eebde700fe6fd6573e80bd8e5ed82b4ae705575 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Sat, 11 Nov 2006 17:24:59 +1100 Subject: [POWERPC] Souped-up of_platform_device support This patch first splits of_device.c and of_platform.c, the later containing the bits relative to of_platform_device's. On the "breaks" side of things, drivers uisng of_platform_device(s) need to include asm/of_platform.h now and of_(un)register_driver is now of_(un)register_platform_driver. In addition to a few utility functions to locate of_platform_device(s), the main new addition is of_platform_bus_probe() which allows the platform code to trigger an automatic creation of of_platform_devices for a whole tree of devices. The function acts based on the type of the various "parent" devices encountered from a provided root, using either a default known list of bus types that can be "probed" or a passed-in list. It will only register devices on busses matching that list, which mean that typically, it will not register PCI devices, as expected (since they will be picked up by the PCI layer). This will be used by Cell platforms using 4xx-type IOs in the Axon bridge and can be used by any embedded-type device as well. Signed-off-by: Benjamin Herrenschmidt Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/Makefile | 2 +- arch/powerpc/kernel/of_device.c | 172 +++------------ arch/powerpc/kernel/of_platform.c | 372 ++++++++++++++++++++++++++++++++ arch/powerpc/platforms/powermac/setup.c | 1 + drivers/macintosh/smu.c | 3 +- drivers/macintosh/therm_adt746x.c | 2 +- drivers/macintosh/therm_pm72.c | 5 +- drivers/macintosh/therm_windtunnel.c | 7 +- drivers/video/platinumfb.c | 5 +- include/asm-powerpc/of_device.h | 34 +-- include/asm-powerpc/of_platform.h | 60 ++++++ 11 files changed, 476 insertions(+), 187 deletions(-) create mode 100644 arch/powerpc/kernel/of_platform.c create mode 100644 include/asm-powerpc/of_platform.h (limited to 'arch/powerpc') diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile index f34d158b962..04fdbe568d7 100644 --- a/arch/powerpc/kernel/Makefile +++ b/arch/powerpc/kernel/Makefile @@ -21,7 +21,7 @@ obj-$(CONFIG_PPC64) += setup_64.o binfmt_elf32.o sys_ppc32.o \ obj-$(CONFIG_PPC64) += vdso64/ obj-$(CONFIG_ALTIVEC) += vecemu.o vector.o obj-$(CONFIG_PPC_970_NAP) += idle_power4.o -obj-$(CONFIG_PPC_OF) += of_device.o prom_parse.o +obj-$(CONFIG_PPC_OF) += of_device.o of_platform.o prom_parse.o procfs-$(CONFIG_PPC64) := proc_ppc64.o obj-$(CONFIG_PROC_FS) += $(procfs-y) rtaspci-$(CONFIG_PPC64) := rtas_pci.o diff --git a/arch/powerpc/kernel/of_device.c b/arch/powerpc/kernel/of_device.c index 397c83eda20..5c653986afa 100644 --- a/arch/powerpc/kernel/of_device.c +++ b/arch/powerpc/kernel/of_device.c @@ -9,30 +9,26 @@ #include /** - * of_match_device - Tell if an of_device structure has a matching - * of_match structure + * of_match_node - Tell if an device_node has a matching of_match structure * @ids: array of of device match structures to search in - * @dev: the of device structure to match against + * @node: the of device structure to match against * - * Used by a driver to check whether an of_device present in the - * system is in its list of supported devices. + * Low level utility function used by device matching. */ -const struct of_device_id *of_match_device(const struct of_device_id *matches, - const struct of_device *dev) +const struct of_device_id *of_match_node(const struct of_device_id *matches, + const struct device_node *node) { - if (!dev->node) - return NULL; while (matches->name[0] || matches->type[0] || matches->compatible[0]) { int match = 1; if (matches->name[0]) - match &= dev->node->name - && !strcmp(matches->name, dev->node->name); + match &= node->name + && !strcmp(matches->name, node->name); if (matches->type[0]) - match &= dev->node->type - && !strcmp(matches->type, dev->node->type); + match &= node->type + && !strcmp(matches->type, node->type); if (matches->compatible[0]) - match &= device_is_compatible(dev->node, - matches->compatible); + match &= device_is_compatible(node, + matches->compatible); if (match) return matches; matches++; @@ -40,16 +36,21 @@ const struct of_device_id *of_match_device(const struct of_device_id *matches, return NULL; } -static int of_platform_bus_match(struct device *dev, struct device_driver *drv) +/** + * of_match_device - Tell if an of_device structure has a matching + * of_match structure + * @ids: array of of device match structures to search in + * @dev: the of device structure to match against + * + * Used by a driver to check whether an of_device present in the + * system is in its list of supported devices. + */ +const struct of_device_id *of_match_device(const struct of_device_id *matches, + const struct of_device *dev) { - struct of_device * of_dev = to_of_device(dev); - struct of_platform_driver * of_drv = to_of_platform_driver(drv); - const struct of_device_id * matches = of_drv->match_table; - - if (!matches) - return 0; - - return of_match_device(matches, of_dev) != NULL; + if (!dev->node) + return NULL; + return of_match_node(matches, dev->node); } struct of_device *of_dev_get(struct of_device *dev) @@ -71,96 +72,8 @@ void of_dev_put(struct of_device *dev) put_device(&dev->dev); } - -static int of_device_probe(struct device *dev) -{ - int error = -ENODEV; - struct of_platform_driver *drv; - struct of_device *of_dev; - const struct of_device_id *match; - - drv = to_of_platform_driver(dev->driver); - of_dev = to_of_device(dev); - - if (!drv->probe) - return error; - - of_dev_get(of_dev); - - match = of_match_device(drv->match_table, of_dev); - if (match) - error = drv->probe(of_dev, match); - if (error) - of_dev_put(of_dev); - - return error; -} - -static int of_device_remove(struct device *dev) -{ - struct of_device * of_dev = to_of_device(dev); - struct of_platform_driver * drv = to_of_platform_driver(dev->driver); - - if (dev->driver && drv->remove) - drv->remove(of_dev); - return 0; -} - -static int of_device_suspend(struct device *dev, pm_message_t state) -{ - struct of_device * of_dev = to_of_device(dev); - struct of_platform_driver * drv = to_of_platform_driver(dev->driver); - int error = 0; - - if (dev->driver && drv->suspend) - error = drv->suspend(of_dev, state); - return error; -} - -static int of_device_resume(struct device * dev) -{ - struct of_device * of_dev = to_of_device(dev); - struct of_platform_driver * drv = to_of_platform_driver(dev->driver); - int error = 0; - - if (dev->driver && drv->resume) - error = drv->resume(of_dev); - return error; -} - -struct bus_type of_platform_bus_type = { - .name = "of_platform", - .match = of_platform_bus_match, - .probe = of_device_probe, - .remove = of_device_remove, - .suspend = of_device_suspend, - .resume = of_device_resume, -}; - -static int __init of_bus_driver_init(void) -{ - return bus_register(&of_platform_bus_type); -} - -postcore_initcall(of_bus_driver_init); - -int of_register_driver(struct of_platform_driver *drv) -{ - /* initialize common driver fields */ - drv->driver.name = drv->name; - drv->driver.bus = &of_platform_bus_type; - - /* register with core */ - return driver_register(&drv->driver); -} - -void of_unregister_driver(struct of_platform_driver *drv) -{ - driver_unregister(&drv->driver); -} - - -static ssize_t dev_show_devspec(struct device *dev, struct device_attribute *attr, char *buf) +static ssize_t dev_show_devspec(struct device *dev, + struct device_attribute *attr, char *buf) { struct of_device *ofdev; @@ -208,41 +121,10 @@ void of_device_unregister(struct of_device *ofdev) device_unregister(&ofdev->dev); } -struct of_device* of_platform_device_create(struct device_node *np, - const char *bus_id, - struct device *parent) -{ - struct of_device *dev; - - dev = kmalloc(sizeof(*dev), GFP_KERNEL); - if (!dev) - return NULL; - memset(dev, 0, sizeof(*dev)); - - dev->node = of_node_get(np); - dev->dma_mask = 0xffffffffUL; - dev->dev.dma_mask = &dev->dma_mask; - dev->dev.parent = parent; - dev->dev.bus = &of_platform_bus_type; - dev->dev.release = of_release_dev; - - strlcpy(dev->dev.bus_id, bus_id, BUS_ID_SIZE); - - if (of_device_register(dev) != 0) { - kfree(dev); - return NULL; - } - - return dev; -} EXPORT_SYMBOL(of_match_device); -EXPORT_SYMBOL(of_platform_bus_type); -EXPORT_SYMBOL(of_register_driver); -EXPORT_SYMBOL(of_unregister_driver); EXPORT_SYMBOL(of_device_register); EXPORT_SYMBOL(of_device_unregister); EXPORT_SYMBOL(of_dev_get); EXPORT_SYMBOL(of_dev_put); -EXPORT_SYMBOL(of_platform_device_create); EXPORT_SYMBOL(of_release_dev); diff --git a/arch/powerpc/kernel/of_platform.c b/arch/powerpc/kernel/of_platform.c new file mode 100644 index 00000000000..25850ade8e6 --- /dev/null +++ b/arch/powerpc/kernel/of_platform.c @@ -0,0 +1,372 @@ +/* + * Copyright (C) 2006 Benjamin Herrenschmidt, IBM Corp. + * + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + */ + +#undef DEBUG + +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include + + +/* + * The list of OF IDs below is used for matching bus types in the + * system whose devices are to be exposed as of_platform_devices. + * + * This is the default list valid for most platforms. This file provides + * functions who can take an explicit list if necessary though + * + * The search is always performed recursively looking for children of + * the provided device_node and recursively if such a children matches + * a bus type in the list + */ + +static struct of_device_id of_default_bus_ids[] = { + { .type = "soc", }, + { .compatible = "soc", }, + { .type = "spider", }, + { .type = "axon", }, + { .type = "plb5", }, + { .type = "plb4", }, + { .type = "opb", }, + {}, +}; + +/* + * + * OF platform device type definition & base infrastructure + * + */ + +static int of_platform_bus_match(struct device *dev, struct device_driver *drv) +{ + struct of_device * of_dev = to_of_device(dev); + struct of_platform_driver * of_drv = to_of_platform_driver(drv); + const struct of_device_id * matches = of_drv->match_table; + + if (!matches) + return 0; + + return of_match_device(matches, of_dev) != NULL; +} + +static int of_platform_device_probe(struct device *dev) +{ + int error = -ENODEV; + struct of_platform_driver *drv; + struct of_device *of_dev; + const struct of_device_id *match; + + drv = to_of_platform_driver(dev->driver); + of_dev = to_of_device(dev); + + if (!drv->probe) + return error; + + of_dev_get(of_dev); + + match = of_match_device(drv->match_table, of_dev); + if (match) + error = drv->probe(of_dev, match); + if (error) + of_dev_put(of_dev); + + return error; +} + +static int of_platform_device_remove(struct device *dev) +{ + struct of_device * of_dev = to_of_device(dev); + struct of_platform_driver * drv = to_of_platform_driver(dev->driver); + + if (dev->driver && drv->remove) + drv->remove(of_dev); + return 0; +} + +static int of_platform_device_suspend(struct device *dev, pm_message_t state) +{ + struct of_device * of_dev = to_of_device(dev); + struct of_platform_driver * drv = to_of_platform_driver(dev->driver); + int error = 0; + + if (dev->driver && drv->suspend) + error = drv->suspend(of_dev, state); + return error; +} + +static int of_platform_device_resume(struct device * dev) +{ + struct of_device * of_dev = to_of_device(dev); + struct of_platform_driver * drv = to_of_platform_driver(dev->driver); + int error = 0; + + if (dev->driver && drv->resume) + error = drv->resume(of_dev); + return error; +} + +struct bus_type of_platform_bus_type = { + .name = "of_platform", + .match = of_platform_bus_match, + .probe = of_platform_device_probe, + .remove = of_platform_device_remove, + .suspend = of_platform_device_suspend, + .resume = of_platform_device_resume, +}; +EXPORT_SYMBOL(of_platform_bus_type); + +static int __init of_bus_driver_init(void) +{ + return bus_register(&of_platform_bus_type); +} + +postcore_initcall(of_bus_driver_init); + +int of_register_platform_driver(struct of_platform_driver *drv) +{ + /* initialize common driver fields */ + drv->driver.name = drv->name; + drv->driver.bus = &of_platform_bus_type; + + /* register with core */ + return driver_register(&drv->driver); +} +EXPORT_SYMBOL(of_register_platform_driver); + +void of_unregister_platform_driver(struct of_platform_driver *drv) +{ + driver_unregister(&drv->driver); +} +EXPORT_SYMBOL(of_unregister_platform_driver); + +static void of_platform_make_bus_id(struct of_device *dev) +{ + struct device_node *node = dev->node; + char *name = dev->dev.bus_id; + const u32 *reg; + u64 addr; + + /* + * If it's a DCR based device, use 'd' for native DCRs + * and 'D' for MMIO DCRs. + */ +#ifdef CONFIG_PPC_DCR + reg = get_property(node, "dcr-reg", NULL); + if (reg) { +#ifdef CONFIG_PPC_DCR_NATIVE + snprintf(name, BUS_ID_SIZE, "d%x.%s", + *reg, node->name); +#else /* CONFIG_PPC_DCR_NATIVE */ + addr = of_translate_dcr_address(node, *reg, NULL); + if (addr != OF_BAD_ADDR) { + snprintf(name, BUS_ID_SIZE, + "D%llx.%s", (unsigned long long)addr, + node->name); + return; + } +#endif /* !CONFIG_PPC_DCR_NATIVE */ + } +#endif /* CONFIG_PPC_DCR */ + + /* + * For MMIO, get the physical address + */ + reg = get_property(node, "reg", NULL); + if (reg) { + addr = of_translate_address(node, reg); + if (addr != OF_BAD_ADDR) { + snprintf(name, BUS_ID_SIZE, + "%llx.%s", (unsigned long long)addr, + node->name); + return; + } + } + + /* + * No BusID, use the node name and pray + */ + snprintf(name, BUS_ID_SIZE, "%s", node->name); +} + +struct of_device* of_platform_device_create(struct device_node *np, + const char *bus_id, + struct device *parent) +{ + struct of_device *dev; + + dev = kmalloc(sizeof(*dev), GFP_KERNEL); + if (!dev) + return NULL; + memset(dev, 0, sizeof(*dev)); + + dev->node = of_node_get(np); + dev->dma_mask = 0xffffffffUL; + dev->dev.dma_mask = &dev->dma_mask; + dev->dev.parent = parent; + dev->dev.bus = &of_platform_bus_type; + dev->dev.release = of_release_dev; + + if (bus_id) + strlcpy(dev->dev.bus_id, bus_id, BUS_ID_SIZE); + else + of_platform_make_bus_id(dev); + + if (of_device_register(dev) != 0) { + kfree(dev); + return NULL; + } + + return dev; +} +EXPORT_SYMBOL(of_platform_device_create); + + + +/** + * of_platform_bus_create - Create an OF device for a bus node and all its + * children. Optionally recursively instanciate matching busses. + * @bus: device node of the bus to instanciate + * @matches: match table, NULL to use the default, OF_NO_DEEP_PROBE to + * disallow recursive creation of child busses + */ +static int of_platform_bus_create(struct device_node *bus, + struct of_device_id *matches, + struct device *parent) +{ + struct device_node *child; + struct of_device *dev; + int rc = 0; + + for (child = NULL; (child = of_get_next_child(bus, child)); ) { + pr_debug(" create child: %s\n", child->full_name); + dev = of_platform_device_create(child, NULL, parent); + if (dev == NULL) + rc = -ENOMEM; + else if (!of_match_node(matches, child)) + continue; + if (rc == 0) { + pr_debug(" and sub busses\n"); + rc = of_platform_bus_create(child, matches, &dev->dev); + } if (rc) { + of_node_put(child); + break; + } + } + return rc; +} + +/** + * of_platform_bus_probe - Probe the device-tree for platform busses + * @root: parent of the first level to probe or NULL for the root of the tree + * @matches: match table, NULL to use the default + * @parent: parent to hook devices from, NULL for toplevel + * + * Note that children of the provided root are not instanciated as devices + * unless the specified root itself matches the bus list and is not NULL. + */ + +int of_platform_bus_probe(struct device_node *root, + struct of_device_id *matches, + struct device *parent) +{ + struct device_node *child; + struct of_device *dev; + int rc = 0; + + if (matches == NULL) + matches = of_default_bus_ids; + if (matches == OF_NO_DEEP_PROBE) + return -EINVAL; + if (root == NULL) + root = of_find_node_by_path("/"); + else + of_node_get(root); + + pr_debug("of_platform_bus_probe()\n"); + pr_debug(" starting at: %s\n", root->full_name); + + /* Do a self check of bus type, if there's a match, create + * children + */ + if (of_match_node(matches, root)) { + pr_debug(" root match, create all sub devices\n"); + dev = of_platform_device_create(root, NULL, parent); + if (dev == NULL) { + rc = -ENOMEM; + goto bail; + } + pr_debug(" create all sub busses\n"); + rc = of_platform_bus_create(root, matches, &dev->dev); + goto bail; + } + for (child = NULL; (child = of_get_next_child(root, child)); ) { + if (!of_match_node(matches, child)) + continue; + + pr_debug(" match: %s\n", child->full_name); + dev = of_platform_device_create(child, NULL, parent); + if (dev == NULL) + rc = -ENOMEM; + else + rc = of_platform_bus_create(child, matches, &dev->dev); + if (rc) { + of_node_put(child); + break; + } + } + bail: + of_node_put(root); + return rc; +} +EXPORT_SYMBOL(of_platform_bus_probe); + +static int of_dev_node_match(struct device *dev, void *data) +{ + return to_of_device(dev)->node == data; +} + +struct of_device *of_find_device_by_node(struct device_node *np) +{ + struct device *dev; + + dev = bus_find_device(&of_platform_bus_type, + NULL, np, of_dev_node_match); + if (dev) + return to_of_device(dev); + return NULL; +} +EXPORT_SYMBOL(of_find_device_by_node); + +static int of_dev_phandle_match(struct device *dev, void *data) +{ + phandle *ph = data; + return to_of_device(dev)->node->linux_phandle == *ph; +} + +struct of_device *of_find_device_by_phandle(phandle ph) +{ + struct device *dev; + + dev = bus_find_device(&of_platform_bus_type, + NULL, &ph, of_dev_phandle_match); + if (dev) + return to_of_device(dev); + return NULL; +} +EXPORT_SYMBOL(of_find_device_by_phandle); diff --git a/arch/powerpc/platforms/powermac/setup.c b/arch/powerpc/platforms/powermac/setup.c index 805791d76fd..4ec6a5a65f3 100644 --- a/arch/powerpc/platforms/powermac/setup.c +++ b/arch/powerpc/platforms/powermac/setup.c @@ -70,6 +70,7 @@ #include #include #include +#include #include #include #include diff --git a/drivers/macintosh/smu.c b/drivers/macintosh/smu.c index ade25b3fbb3..4f724cdd2ef 100644 --- a/drivers/macintosh/smu.c +++ b/drivers/macintosh/smu.c @@ -46,6 +46,7 @@ #include #include #include +#include #define VERSION "0.7" #define AUTHOR "(c) 2005 Benjamin Herrenschmidt, IBM Corp." @@ -653,7 +654,7 @@ static int __init smu_init_sysfs(void) * I'm a bit too far from figuring out how that works with those * new chipsets, but that will come back and bite us */ - of_register_driver(&smu_of_platform_driver); + of_register_platform_driver(&smu_of_platform_driver); return 0; } diff --git a/drivers/macintosh/therm_adt746x.c b/drivers/macintosh/therm_adt746x.c index a0f30d0853e..13b953ae8eb 100644 --- a/drivers/macintosh/therm_adt746x.c +++ b/drivers/macintosh/therm_adt746x.c @@ -30,7 +30,7 @@ #include #include #include -#include +#include #undef DEBUG diff --git a/drivers/macintosh/therm_pm72.c b/drivers/macintosh/therm_pm72.c index d00c0c37a12..2e4ad44a863 100644 --- a/drivers/macintosh/therm_pm72.c +++ b/drivers/macintosh/therm_pm72.c @@ -129,6 +129,7 @@ #include #include #include +#include #include "therm_pm72.h" @@ -2236,14 +2237,14 @@ static int __init therm_pm72_init(void) return -ENODEV; } - of_register_driver(&fcu_of_platform_driver); + of_register_platform_driver(&fcu_of_platform_driver); return 0; } static void __exit therm_pm72_exit(void) { - of_unregister_driver(&fcu_of_platform_driver); + of_unregister_platform_driver(&fcu_of_platform_driver); if (of_dev) of_device_unregister(of_dev); diff --git a/drivers/macintosh/therm_windtunnel.c b/drivers/macintosh/therm_windtunnel.c index 738faab1b22..a1d3a987cb3 100644 --- a/drivers/macintosh/therm_windtunnel.c +++ b/drivers/macintosh/therm_windtunnel.c @@ -36,12 +36,13 @@ #include #include #include + #include #include #include #include #include -#include +#include #include #define LOG_TEMP 0 /* continously log temperature */ @@ -511,14 +512,14 @@ g4fan_init( void ) return -ENODEV; } - of_register_driver( &therm_of_driver ); + of_register_platform_driver( &therm_of_driver ); return 0; } static void __exit g4fan_exit( void ) { - of_unregister_driver( &therm_of_driver ); + of_unregister_platform_driver( &therm_of_driver ); if( x.of_dev ) of_device_unregister( x.of_dev ); diff --git a/drivers/video/platinumfb.c b/drivers/video/platinumfb.c index fdb33cd21a2..cb26c6df058 100644 --- a/drivers/video/platinumfb.c +++ b/drivers/video/platinumfb.c @@ -34,6 +34,7 @@ #include #include #include +#include #include "macmodes.h" #include "platinumfb.h" @@ -682,14 +683,14 @@ static int __init platinumfb_init(void) return -ENODEV; platinumfb_setup(option); #endif - of_register_driver(&platinum_driver); + of_register_platform_driver(&platinum_driver); return 0; } static void __exit platinumfb_exit(void) { - of_unregister_driver(&platinum_driver); + of_unregister_platform_driver(&platinum_driver); } MODULE_LICENSE("GPL"); diff --git a/include/asm-powerpc/of_device.h b/include/asm-powerpc/of_device.h index c5c0b0b3cd5..1ef7e9edd1a 100644 --- a/include/asm-powerpc/of_device.h +++ b/include/asm-powerpc/of_device.h @@ -6,12 +6,6 @@ #include #include -/* - * The of_platform_bus_type is a bus type used by drivers that do not - * attach to a macio or similar bus but still use OF probing - * mechanism - */ -extern struct bus_type of_platform_bus_type; /* * The of_device is a kind of "base class" that is a superset of @@ -26,40 +20,16 @@ struct of_device }; #define to_of_device(d) container_of(d, struct of_device, dev) +extern const struct of_device_id *of_match_node( + const struct of_device_id *matches, const struct device_node *node); extern const struct of_device_id *of_match_device( const struct of_device_id *matches, const struct of_device *dev); extern struct of_device *of_dev_get(struct of_device *dev); extern void of_dev_put(struct of_device *dev); -/* - * An of_platform_driver driver is attached to a basic of_device on - * the "platform bus" (of_platform_bus_type) - */ -struct of_platform_driver -{ - char *name; - struct of_device_id *match_table; - struct module *owner; - - int (*probe)(struct of_device* dev, const struct of_device_id *match); - int (*remove)(struct of_device* dev); - - int (*suspend)(struct of_device* dev, pm_message_t state); - int (*resume)(struct of_device* dev); - int (*shutdown)(struct of_device* dev); - - struct device_driver driver; -}; -#define to_of_platform_driver(drv) container_of(drv,struct of_platform_driver, driver) - -extern int of_register_driver(struct of_platform_driver *drv); -extern void of_unregister_driver(struct of_platform_driver *drv); extern int of_device_register(struct of_device *ofdev); extern void of_device_unregister(struct of_device *ofdev); -extern struct of_device *of_platform_device_create(struct device_node *np, - const char *bus_id, - struct device *parent); extern void of_release_dev(struct device *dev); #endif /* __KERNEL__ */ diff --git a/include/asm-powerpc/of_platform.h b/include/asm-powerpc/of_platform.h new file mode 100644 index 00000000000..217eafb167e --- /dev/null +++ b/include/asm-powerpc/of_platform.h @@ -0,0 +1,60 @@ +/* + * Copyright (C) 2006 Benjamin Herrenschmidt, IBM Corp. + * + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + */ + +#include + +/* + * The of_platform_bus_type is a bus type used by drivers that do not + * attach to a macio or similar bus but still use OF probing + * mechanism + */ +extern struct bus_type of_platform_bus_type; + +/* + * An of_platform_driver driver is attached to a basic of_device on + * the "platform bus" (of_platform_bus_type) + */ +struct of_platform_driver +{ + char *name; + struct of_device_id *match_table; + struct module *owner; + + int (*probe)(struct of_device* dev, + const struct of_device_id *match); + int (*remove)(struct of_device* dev); + + int (*suspend)(struct of_device* dev, pm_message_t state); + int (*resume)(struct of_device* dev); + int (*shutdown)(struct of_device* dev); + + struct device_driver driver; +}; +#define to_of_platform_driver(drv) \ + container_of(drv,struct of_platform_driver, driver) + +/* Platform drivers register/unregister */ +extern int of_register_platform_driver(struct of_platform_driver *drv); +extern void of_unregister_platform_driver(struct of_platform_driver *drv); + +/* Platform devices and busses creation */ +extern struct of_device *of_platform_device_create(struct device_node *np, + const char *bus_id, + struct device *parent); +/* pseudo "matches" value to not do deep probe */ +#define OF_NO_DEEP_PROBE ((struct of_device_id *)-1) + +extern int of_platform_bus_probe(struct device_node *root, + struct of_device_id *matches, + struct device *parent); + +extern struct of_device *of_find_device_by_node(struct device_node *np); +extern struct of_device *of_find_device_by_phandle(phandle ph); -- cgit v1.2.3-70-g09d2 From 96289b07eb319ab3f64db3f0d981970aa1d60a60 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Sat, 11 Nov 2006 17:25:00 +1100 Subject: [POWERPC] Hook of_platform_bus_probe with cell Hook up of_platform_bus_probe with the cell platform in order to publish the non-PCI devices in the device-tree of cell blades as of_platform_device(s) Signed-off-by: Benjamin Herrenschmidt Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/cell/setup.c | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'arch/powerpc') diff --git a/arch/powerpc/platforms/cell/setup.c b/arch/powerpc/platforms/cell/setup.c index 13f628def36..d704bc19a64 100644 --- a/arch/powerpc/platforms/cell/setup.c +++ b/arch/powerpc/platforms/cell/setup.c @@ -51,6 +51,7 @@ #include #include #include +#include #include "interrupt.h" #include "iommu.h" @@ -81,6 +82,14 @@ static void cell_progress(char *s, unsigned short hex) printk("*** %04x : %s\n", hex, s ? s : ""); } +static int __init cell_publish_devices(void) +{ + if (machine_is(cell)) + of_platform_bus_probe(NULL, NULL, NULL); + return 0; +} +device_initcall(cell_publish_devices); + static void cell_mpic_cascade(unsigned int irq, struct irq_desc *desc) { struct mpic *mpic = desc->handler_data; -- cgit v1.2.3-70-g09d2 From 12d04eef927bf61328af2c7cbe756c96f98ac3bf Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Sat, 11 Nov 2006 17:25:02 +1100 Subject: [POWERPC] Refactor 64 bits DMA operations This patch completely refactors DMA operations for 64 bits powerpc. 32 bits is untouched for now. We use the new dev_archdata structure to add the dma operations pointer and associated data to struct device. While at it, we also add the OF node pointer and numa node. In the future, we might want to look into merging that with pci_dn as well. The old vio, pci-iommu and pci-direct DMA ops are gone. They are now replaced by a set of generic iommu and direct DMA ops (non PCI specific) that can be used by bus types. The toplevel implementation is now inline. Signed-off-by: Benjamin Herrenschmidt Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/Makefile | 3 +- arch/powerpc/kernel/dma_64.c | 240 ++++++++++++++++------------- arch/powerpc/kernel/ibmebus.c | 6 +- arch/powerpc/kernel/iommu.c | 6 +- arch/powerpc/kernel/of_platform.c | 9 +- arch/powerpc/kernel/pci_64.c | 26 +++- arch/powerpc/kernel/pci_direct_iommu.c | 98 ------------ arch/powerpc/kernel/pci_iommu.c | 164 -------------------- arch/powerpc/kernel/setup_64.c | 1 + arch/powerpc/kernel/vio.c | 94 +++-------- arch/powerpc/platforms/cell/iommu.c | 21 +-- arch/powerpc/platforms/iseries/iommu.c | 12 +- arch/powerpc/platforms/iseries/pci.c | 2 +- arch/powerpc/platforms/pasemi/setup.c | 16 +- arch/powerpc/platforms/pseries/iommu.c | 90 +++++------ arch/powerpc/platforms/pseries/pci_dlpar.c | 4 +- arch/powerpc/sysdev/dart_iommu.c | 31 ++-- include/asm-powerpc/device.h | 19 ++- include/asm-powerpc/dma-mapping.h | 180 +++++++++++++++++----- include/asm-powerpc/ibmebus.h | 1 - include/asm-powerpc/iommu.h | 20 +-- include/asm-powerpc/iseries/iommu.h | 4 +- include/asm-powerpc/machdep.h | 4 +- include/asm-powerpc/of_device.h | 2 +- include/asm-powerpc/pci.h | 8 +- include/asm-powerpc/vio.h | 1 - 26 files changed, 451 insertions(+), 611 deletions(-) delete mode 100644 arch/powerpc/kernel/pci_direct_iommu.c delete mode 100644 arch/powerpc/kernel/pci_iommu.c (limited to 'arch/powerpc') diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile index 04fdbe568d7..eba8d118e21 100644 --- a/arch/powerpc/kernel/Makefile +++ b/arch/powerpc/kernel/Makefile @@ -62,8 +62,7 @@ obj-$(CONFIG_PPC_UDBG_16550) += legacy_serial.o udbg_16550.o module-$(CONFIG_PPC64) += module_64.o obj-$(CONFIG_MODULES) += $(module-y) -pci64-$(CONFIG_PPC64) += pci_64.o pci_dn.o pci_iommu.o \ - pci_direct_iommu.o iomap.o +pci64-$(CONFIG_PPC64) += pci_64.o pci_dn.o iomap.o pci32-$(CONFIG_PPC32) := pci_32.o obj-$(CONFIG_PCI) += $(pci64-y) $(pci32-y) kexec-$(CONFIG_PPC64) := machine_kexec_64.o diff --git a/arch/powerpc/kernel/dma_64.c b/arch/powerpc/kernel/dma_64.c index 6c168f6ea14..4e655119978 100644 --- a/arch/powerpc/kernel/dma_64.c +++ b/arch/powerpc/kernel/dma_64.c @@ -1,151 +1,185 @@ /* - * Copyright (C) 2004 IBM Corporation + * Copyright (C) 2006 Benjamin Herrenschmidt, IBM Corporation * - * Implements the generic device dma API for ppc64. Handles - * the pci and vio busses + * Provide default implementations of the DMA mapping callbacks for + * directly mapped busses and busses using the iommu infrastructure */ #include #include -/* Include the busses we support */ -#include -#include -#include -#include #include +#include +#include -static struct dma_mapping_ops *get_dma_ops(struct device *dev) -{ -#ifdef CONFIG_PCI - if (dev->bus == &pci_bus_type) - return &pci_dma_ops; -#endif -#ifdef CONFIG_IBMVIO - if (dev->bus == &vio_bus_type) - return &vio_dma_ops; -#endif -#ifdef CONFIG_IBMEBUS - if (dev->bus == &ibmebus_bus_type) - return &ibmebus_dma_ops; -#endif - return NULL; -} +/* + * Generic iommu implementation + */ -int dma_supported(struct device *dev, u64 mask) +static inline unsigned long device_to_mask(struct device *dev) { - struct dma_mapping_ops *dma_ops = get_dma_ops(dev); + if (dev->dma_mask && *dev->dma_mask) + return *dev->dma_mask; + /* Assume devices without mask can take 32 bit addresses */ + return 0xfffffffful; +} - BUG_ON(!dma_ops); - return dma_ops->dma_supported(dev, mask); +/* Allocates a contiguous real buffer and creates mappings over it. + * Returns the virtual address of the buffer and sets dma_handle + * to the dma address (mapping) of the first page. + */ +static void *dma_iommu_alloc_coherent(struct device *dev, size_t size, + dma_addr_t *dma_handle, gfp_t flag) +{ + return iommu_alloc_coherent(dev->archdata.dma_data, size, dma_handle, + device_to_mask(dev), flag, + dev->archdata.numa_node); } -EXPORT_SYMBOL(dma_supported); -int dma_set_mask(struct device *dev, u64 dma_mask) +static void dma_iommu_free_coherent(struct device *dev, size_t size, + void *vaddr, dma_addr_t dma_handle) { -#ifdef CONFIG_PCI - if (dev->bus == &pci_bus_type) - return pci_set_dma_mask(to_pci_dev(dev), dma_mask); -#endif -#ifdef CONFIG_IBMVIO - if (dev->bus == &vio_bus_type) - return -EIO; -#endif /* CONFIG_IBMVIO */ -#ifdef CONFIG_IBMEBUS - if (dev->bus == &ibmebus_bus_type) - return -EIO; -#endif - BUG(); - return 0; + iommu_free_coherent(dev->archdata.dma_data, size, vaddr, dma_handle); } -EXPORT_SYMBOL(dma_set_mask); -void *dma_alloc_coherent(struct device *dev, size_t size, - dma_addr_t *dma_handle, gfp_t flag) +/* Creates TCEs for a user provided buffer. The user buffer must be + * contiguous real kernel storage (not vmalloc). The address of the buffer + * passed here is the kernel (virtual) address of the buffer. The buffer + * need not be page aligned, the dma_addr_t returned will point to the same + * byte within the page as vaddr. + */ +static dma_addr_t dma_iommu_map_single(struct device *dev, void *vaddr, + size_t size, + enum dma_data_direction direction) { - struct dma_mapping_ops *dma_ops = get_dma_ops(dev); - - BUG_ON(!dma_ops); - - return dma_ops->alloc_coherent(dev, size, dma_handle, flag); + return iommu_map_single(dev->archdata.dma_data, vaddr, size, + device_to_mask(dev), direction); } -EXPORT_SYMBOL(dma_alloc_coherent); -void dma_free_coherent(struct device *dev, size_t size, void *cpu_addr, - dma_addr_t dma_handle) + +static void dma_iommu_unmap_single(struct device *dev, dma_addr_t dma_handle, + size_t size, + enum dma_data_direction direction) { - struct dma_mapping_ops *dma_ops = get_dma_ops(dev); + iommu_unmap_single(dev->archdata.dma_data, dma_handle, size, direction); +} - BUG_ON(!dma_ops); - dma_ops->free_coherent(dev, size, cpu_addr, dma_handle); +static int dma_iommu_map_sg(struct device *dev, struct scatterlist *sglist, + int nelems, enum dma_data_direction direction) +{ + return iommu_map_sg(dev->archdata.dma_data, sglist, nelems, + device_to_mask(dev), direction); } -EXPORT_SYMBOL(dma_free_coherent); -dma_addr_t dma_map_single(struct device *dev, void *cpu_addr, size_t size, - enum dma_data_direction direction) +static void dma_iommu_unmap_sg(struct device *dev, struct scatterlist *sglist, + int nelems, enum dma_data_direction direction) { - struct dma_mapping_ops *dma_ops = get_dma_ops(dev); - - BUG_ON(!dma_ops); - - return dma_ops->map_single(dev, cpu_addr, size, direction); + iommu_unmap_sg(dev->archdata.dma_data, sglist, nelems, direction); } -EXPORT_SYMBOL(dma_map_single); -void dma_unmap_single(struct device *dev, dma_addr_t dma_addr, size_t size, - enum dma_data_direction direction) +/* We support DMA to/from any memory page via the iommu */ +static int dma_iommu_dma_supported(struct device *dev, u64 mask) { - struct dma_mapping_ops *dma_ops = get_dma_ops(dev); - - BUG_ON(!dma_ops); - - dma_ops->unmap_single(dev, dma_addr, size, direction); + struct iommu_table *tbl = dev->archdata.dma_data; + + if (!tbl || tbl->it_offset > mask) { + printk(KERN_INFO + "Warning: IOMMU offset too big for device mask\n"); + if (tbl) + printk(KERN_INFO + "mask: 0x%08lx, table offset: 0x%08lx\n", + mask, tbl->it_offset); + else + printk(KERN_INFO "mask: 0x%08lx, table unavailable\n", + mask); + return 0; + } else + return 1; } -EXPORT_SYMBOL(dma_unmap_single); -dma_addr_t dma_map_page(struct device *dev, struct page *page, - unsigned long offset, size_t size, - enum dma_data_direction direction) -{ - struct dma_mapping_ops *dma_ops = get_dma_ops(dev); +struct dma_mapping_ops dma_iommu_ops = { + .alloc_coherent = dma_iommu_alloc_coherent, + .free_coherent = dma_iommu_free_coherent, + .map_single = dma_iommu_map_single, + .unmap_single = dma_iommu_unmap_single, + .map_sg = dma_iommu_map_sg, + .unmap_sg = dma_iommu_unmap_sg, + .dma_supported = dma_iommu_dma_supported, +}; +EXPORT_SYMBOL(dma_iommu_ops); - BUG_ON(!dma_ops); +/* + * Generic direct DMA implementation + */ - return dma_ops->map_single(dev, page_address(page) + offset, size, - direction); +static void *dma_direct_alloc_coherent(struct device *dev, size_t size, + dma_addr_t *dma_handle, gfp_t flag) +{ + void *ret; + + /* TODO: Maybe use the numa node here too ? */ + ret = (void *)__get_free_pages(flag, get_order(size)); + if (ret != NULL) { + memset(ret, 0, size); + *dma_handle = virt_to_abs(ret); + } + return ret; } -EXPORT_SYMBOL(dma_map_page); -void dma_unmap_page(struct device *dev, dma_addr_t dma_address, size_t size, - enum dma_data_direction direction) +static void dma_direct_free_coherent(struct device *dev, size_t size, + void *vaddr, dma_addr_t dma_handle) { - struct dma_mapping_ops *dma_ops = get_dma_ops(dev); + free_pages((unsigned long)vaddr, get_order(size)); +} - BUG_ON(!dma_ops); +static dma_addr_t dma_direct_map_single(struct device *dev, void *ptr, + size_t size, + enum dma_data_direction direction) +{ + return virt_to_abs(ptr); +} - dma_ops->unmap_single(dev, dma_address, size, direction); +static void dma_direct_unmap_single(struct device *dev, dma_addr_t dma_addr, + size_t size, + enum dma_data_direction direction) +{ } -EXPORT_SYMBOL(dma_unmap_page); -int dma_map_sg(struct device *dev, struct scatterlist *sg, int nents, - enum dma_data_direction direction) +static int dma_direct_map_sg(struct device *dev, struct scatterlist *sg, + int nents, enum dma_data_direction direction) { - struct dma_mapping_ops *dma_ops = get_dma_ops(dev); + int i; - BUG_ON(!dma_ops); + for (i = 0; i < nents; i++, sg++) { + sg->dma_address = page_to_phys(sg->page) + sg->offset; + sg->dma_length = sg->length; + } - return dma_ops->map_sg(dev, sg, nents, direction); + return nents; } -EXPORT_SYMBOL(dma_map_sg); -void dma_unmap_sg(struct device *dev, struct scatterlist *sg, int nhwentries, - enum dma_data_direction direction) +static void dma_direct_unmap_sg(struct device *dev, struct scatterlist *sg, + int nents, enum dma_data_direction direction) { - struct dma_mapping_ops *dma_ops = get_dma_ops(dev); - - BUG_ON(!dma_ops); +} - dma_ops->unmap_sg(dev, sg, nhwentries, direction); +static int dma_direct_dma_supported(struct device *dev, u64 mask) +{ + /* Could be improved to check for memory though it better be + * done via some global so platforms can set the limit in case + * they have limited DMA windows + */ + return mask >= DMA_32BIT_MASK; } -EXPORT_SYMBOL(dma_unmap_sg); + +struct dma_mapping_ops dma_direct_ops = { + .alloc_coherent = dma_direct_alloc_coherent, + .free_coherent = dma_direct_free_coherent, + .map_single = dma_direct_map_single, + .unmap_single = dma_direct_unmap_single, + .map_sg = dma_direct_map_sg, + .unmap_sg = dma_direct_unmap_sg, + .dma_supported = dma_direct_dma_supported, +}; +EXPORT_SYMBOL(dma_direct_ops); diff --git a/arch/powerpc/kernel/ibmebus.c b/arch/powerpc/kernel/ibmebus.c index 39db7a3affe..8e515797de6 100644 --- a/arch/powerpc/kernel/ibmebus.c +++ b/arch/powerpc/kernel/ibmebus.c @@ -112,7 +112,7 @@ static int ibmebus_dma_supported(struct device *dev, u64 mask) return 1; } -struct dma_mapping_ops ibmebus_dma_ops = { +static struct dma_mapping_ops ibmebus_dma_ops = { .alloc_coherent = ibmebus_alloc_coherent, .free_coherent = ibmebus_free_coherent, .map_single = ibmebus_map_single, @@ -176,6 +176,10 @@ static struct ibmebus_dev* __devinit ibmebus_register_device_common( dev->ofdev.dev.bus = &ibmebus_bus_type; dev->ofdev.dev.release = ibmebus_dev_release; + dev->ofdev.dev.archdata.of_node = dev->ofdev.node; + dev->ofdev.dev.archdata.dma_ops = &ibmebus_dma_ops; + dev->ofdev.dev.archdata.numa_node = of_node_to_nid(dev->ofdev.node); + /* An ibmebusdev is based on a of_device. We have to change the * bus type to use our own DMA mapping operations. */ diff --git a/arch/powerpc/kernel/iommu.c b/arch/powerpc/kernel/iommu.c index ba6b7256084..95edad4faf2 100644 --- a/arch/powerpc/kernel/iommu.c +++ b/arch/powerpc/kernel/iommu.c @@ -258,9 +258,9 @@ static void iommu_free(struct iommu_table *tbl, dma_addr_t dma_addr, spin_unlock_irqrestore(&(tbl->it_lock), flags); } -int iommu_map_sg(struct device *dev, struct iommu_table *tbl, - struct scatterlist *sglist, int nelems, - unsigned long mask, enum dma_data_direction direction) +int iommu_map_sg(struct iommu_table *tbl, struct scatterlist *sglist, + int nelems, unsigned long mask, + enum dma_data_direction direction) { dma_addr_t dma_next = 0, dma_addr; unsigned long flags; diff --git a/arch/powerpc/kernel/of_platform.c b/arch/powerpc/kernel/of_platform.c index 25850ade8e6..7a0e77af7c9 100644 --- a/arch/powerpc/kernel/of_platform.c +++ b/arch/powerpc/kernel/of_platform.c @@ -22,7 +22,7 @@ #include #include #include - +#include /* * The list of OF IDs below is used for matching bus types in the @@ -221,6 +221,13 @@ struct of_device* of_platform_device_create(struct device_node *np, dev->dev.parent = parent; dev->dev.bus = &of_platform_bus_type; dev->dev.release = of_release_dev; + dev->dev.archdata.of_node = np; + dev->dev.archdata.numa_node = of_node_to_nid(np); + + /* We do not fill the DMA ops for platform devices by default. + * This is currently the responsibility of the platform code + * to do such, possibly using a device notifier + */ if (bus_id) strlcpy(dev->dev.bus_id, bus_id, BUS_ID_SIZE); diff --git a/arch/powerpc/kernel/pci_64.c b/arch/powerpc/kernel/pci_64.c index 9a6bb80a8cd..88b78484b94 100644 --- a/arch/powerpc/kernel/pci_64.c +++ b/arch/powerpc/kernel/pci_64.c @@ -61,7 +61,7 @@ void iSeries_pcibios_init(void); LIST_HEAD(hose_list); -struct dma_mapping_ops pci_dma_ops; +struct dma_mapping_ops *pci_dma_ops; EXPORT_SYMBOL(pci_dma_ops); int global_phb_number; /* Global phb counter */ @@ -1205,15 +1205,35 @@ void __devinit pcibios_fixup_device_resources(struct pci_dev *dev, } EXPORT_SYMBOL(pcibios_fixup_device_resources); +void __devinit pcibios_setup_new_device(struct pci_dev *dev) +{ + struct dev_archdata *sd = &dev->dev.archdata; + + sd->of_node = pci_device_to_OF_node(dev); + + DBG("PCI device %s OF node: %s\n", pci_name(dev), + sd->of_node ? sd->of_node->full_name : ""); + + sd->dma_ops = pci_dma_ops; +#ifdef CONFIG_NUMA + sd->numa_node = pcibus_to_node(dev->bus); +#else + sd->numa_node = -1; +#endif + if (ppc_md.pci_dma_dev_setup) + ppc_md.pci_dma_dev_setup(dev); +} +EXPORT_SYMBOL(pcibios_setup_new_device); static void __devinit do_bus_setup(struct pci_bus *bus) { struct pci_dev *dev; - ppc_md.iommu_bus_setup(bus); + if (ppc_md.pci_dma_bus_setup) + ppc_md.pci_dma_bus_setup(bus); list_for_each_entry(dev, &bus->devices, bus_list) - ppc_md.iommu_dev_setup(dev); + pcibios_setup_new_device(dev); /* Read default IRQs and fixup if necessary */ list_for_each_entry(dev, &bus->devices, bus_list) { diff --git a/arch/powerpc/kernel/pci_direct_iommu.c b/arch/powerpc/kernel/pci_direct_iommu.c deleted file mode 100644 index 72ce082ce73..00000000000 --- a/arch/powerpc/kernel/pci_direct_iommu.c +++ /dev/null @@ -1,98 +0,0 @@ -/* - * Support for DMA from PCI devices to main memory on - * machines without an iommu or with directly addressable - * RAM (typically a pmac with 2Gb of RAM or less) - * - * Copyright (C) 2003 Benjamin Herrenschmidt (benh@kernel.crashing.org) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include -#include -#include -#include - -static void *pci_direct_alloc_coherent(struct device *hwdev, size_t size, - dma_addr_t *dma_handle, gfp_t flag) -{ - void *ret; - - ret = (void *)__get_free_pages(flag, get_order(size)); - if (ret != NULL) { - memset(ret, 0, size); - *dma_handle = virt_to_abs(ret); - } - return ret; -} - -static void pci_direct_free_coherent(struct device *hwdev, size_t size, - void *vaddr, dma_addr_t dma_handle) -{ - free_pages((unsigned long)vaddr, get_order(size)); -} - -static dma_addr_t pci_direct_map_single(struct device *hwdev, void *ptr, - size_t size, enum dma_data_direction direction) -{ - return virt_to_abs(ptr); -} - -static void pci_direct_unmap_single(struct device *hwdev, dma_addr_t dma_addr, - size_t size, enum dma_data_direction direction) -{ -} - -static int pci_direct_map_sg(struct device *hwdev, struct scatterlist *sg, - int nents, enum dma_data_direction direction) -{ - int i; - - for (i = 0; i < nents; i++, sg++) { - sg->dma_address = page_to_phys(sg->page) + sg->offset; - sg->dma_length = sg->length; - } - - return nents; -} - -static void pci_direct_unmap_sg(struct device *hwdev, struct scatterlist *sg, - int nents, enum dma_data_direction direction) -{ -} - -static int pci_direct_dma_supported(struct device *dev, u64 mask) -{ - return mask < 0x100000000ull; -} - -static struct dma_mapping_ops pci_direct_ops = { - .alloc_coherent = pci_direct_alloc_coherent, - .free_coherent = pci_direct_free_coherent, - .map_single = pci_direct_map_single, - .unmap_single = pci_direct_unmap_single, - .map_sg = pci_direct_map_sg, - .unmap_sg = pci_direct_unmap_sg, - .dma_supported = pci_direct_dma_supported, -}; - -void __init pci_direct_iommu_init(void) -{ - pci_dma_ops = pci_direct_ops; -} diff --git a/arch/powerpc/kernel/pci_iommu.c b/arch/powerpc/kernel/pci_iommu.c deleted file mode 100644 index 0688b2534ac..00000000000 --- a/arch/powerpc/kernel/pci_iommu.c +++ /dev/null @@ -1,164 +0,0 @@ -/* - * Copyright (C) 2001 Mike Corrigan & Dave Engebretsen, IBM Corporation - * - * Rewrite, cleanup, new allocation schemes: - * Copyright (C) 2004 Olof Johansson, IBM Corporation - * - * Dynamic DMA mapping support, platform-independent parts. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -/* - * We can use ->sysdata directly and avoid the extra work in - * pci_device_to_OF_node since ->sysdata will have been initialised - * in the iommu init code for all devices. - */ -#define PCI_GET_DN(dev) ((struct device_node *)((dev)->sysdata)) - -static inline struct iommu_table *device_to_table(struct device *hwdev) -{ - struct pci_dev *pdev; - - if (!hwdev) { - pdev = ppc64_isabridge_dev; - if (!pdev) - return NULL; - } else - pdev = to_pci_dev(hwdev); - - return PCI_DN(PCI_GET_DN(pdev))->iommu_table; -} - - -static inline unsigned long device_to_mask(struct device *hwdev) -{ - struct pci_dev *pdev; - - if (!hwdev) { - pdev = ppc64_isabridge_dev; - if (!pdev) /* This is the best guess we can do */ - return 0xfffffffful; - } else - pdev = to_pci_dev(hwdev); - - if (pdev->dma_mask) - return pdev->dma_mask; - - /* Assume devices without mask can take 32 bit addresses */ - return 0xfffffffful; -} - - -/* Allocates a contiguous real buffer and creates mappings over it. - * Returns the virtual address of the buffer and sets dma_handle - * to the dma address (mapping) of the first page. - */ -static void *pci_iommu_alloc_coherent(struct device *hwdev, size_t size, - dma_addr_t *dma_handle, gfp_t flag) -{ - return iommu_alloc_coherent(device_to_table(hwdev), size, dma_handle, - device_to_mask(hwdev), flag, - pcibus_to_node(to_pci_dev(hwdev)->bus)); -} - -static void pci_iommu_free_coherent(struct device *hwdev, size_t size, - void *vaddr, dma_addr_t dma_handle) -{ - iommu_free_coherent(device_to_table(hwdev), size, vaddr, dma_handle); -} - -/* Creates TCEs for a user provided buffer. The user buffer must be - * contiguous real kernel storage (not vmalloc). The address of the buffer - * passed here is the kernel (virtual) address of the buffer. The buffer - * need not be page aligned, the dma_addr_t returned will point to the same - * byte within the page as vaddr. - */ -static dma_addr_t pci_iommu_map_single(struct device *hwdev, void *vaddr, - size_t size, enum dma_data_direction direction) -{ - return iommu_map_single(device_to_table(hwdev), vaddr, size, - device_to_mask(hwdev), direction); -} - - -static void pci_iommu_unmap_single(struct device *hwdev, dma_addr_t dma_handle, - size_t size, enum dma_data_direction direction) -{ - iommu_unmap_single(device_to_table(hwdev), dma_handle, size, direction); -} - - -static int pci_iommu_map_sg(struct device *pdev, struct scatterlist *sglist, - int nelems, enum dma_data_direction direction) -{ - return iommu_map_sg(pdev, device_to_table(pdev), sglist, - nelems, device_to_mask(pdev), direction); -} - -static void pci_iommu_unmap_sg(struct device *pdev, struct scatterlist *sglist, - int nelems, enum dma_data_direction direction) -{ - iommu_unmap_sg(device_to_table(pdev), sglist, nelems, direction); -} - -/* We support DMA to/from any memory page via the iommu */ -static int pci_iommu_dma_supported(struct device *dev, u64 mask) -{ - struct iommu_table *tbl = device_to_table(dev); - - if (!tbl || tbl->it_offset > mask) { - printk(KERN_INFO "Warning: IOMMU table offset too big for device mask\n"); - if (tbl) - printk(KERN_INFO "mask: 0x%08lx, table offset: 0x%08lx\n", - mask, tbl->it_offset); - else - printk(KERN_INFO "mask: 0x%08lx, table unavailable\n", - mask); - return 0; - } else - return 1; -} - -struct dma_mapping_ops pci_iommu_ops = { - .alloc_coherent = pci_iommu_alloc_coherent, - .free_coherent = pci_iommu_free_coherent, - .map_single = pci_iommu_map_single, - .unmap_single = pci_iommu_unmap_single, - .map_sg = pci_iommu_map_sg, - .unmap_sg = pci_iommu_unmap_sg, - .dma_supported = pci_iommu_dma_supported, -}; - -void pci_iommu_init(void) -{ - pci_dma_ops = pci_iommu_ops; -} diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c index b0f1c82df99..f7ad64acf47 100644 --- a/arch/powerpc/kernel/setup_64.c +++ b/arch/powerpc/kernel/setup_64.c @@ -33,6 +33,7 @@ #include #include #include +#include #include #include #include diff --git a/arch/powerpc/kernel/vio.c b/arch/powerpc/kernel/vio.c index ed007878d1b..a80f8f1d2e5 100644 --- a/arch/powerpc/kernel/vio.c +++ b/arch/powerpc/kernel/vio.c @@ -81,15 +81,15 @@ static struct iommu_table *vio_build_iommu_table(struct vio_dev *dev) struct iommu_table *tbl; unsigned long offset, size; - dma_window = get_property(dev->dev.platform_data, - "ibm,my-dma-window", NULL); + dma_window = get_property(dev->dev.archdata.of_node, + "ibm,my-dma-window", NULL); if (!dma_window) return NULL; tbl = kmalloc(sizeof(*tbl), GFP_KERNEL); - of_parse_dma_window(dev->dev.platform_data, dma_window, - &tbl->it_index, &offset, &size); + of_parse_dma_window(dev->dev.archdata.of_node, dma_window, + &tbl->it_index, &offset, &size); /* TCE table size - measured in tce entries */ tbl->it_size = size >> IOMMU_PAGE_SHIFT; @@ -117,7 +117,8 @@ static const struct vio_device_id *vio_match_device( { while (ids->type[0] != '\0') { if ((strncmp(dev->type, ids->type, strlen(ids->type)) == 0) && - device_is_compatible(dev->dev.platform_data, ids->compat)) + device_is_compatible(dev->dev.archdata.of_node, + ids->compat)) return ids; ids++; } @@ -198,9 +199,9 @@ EXPORT_SYMBOL(vio_unregister_driver); /* vio_dev refcount hit 0 */ static void __devinit vio_dev_release(struct device *dev) { - if (dev->platform_data) { - /* XXX free TCE table */ - of_node_put(dev->platform_data); + if (dev->archdata.of_node) { + /* XXX should free TCE table */ + of_node_put(dev->archdata.of_node); } kfree(to_vio_dev(dev)); } @@ -210,7 +211,7 @@ static void __devinit vio_dev_release(struct device *dev) * @of_node: The OF node for this device. * * Creates and initializes a vio_dev structure from the data in - * of_node (dev.platform_data) and adds it to the list of virtual devices. + * of_node and adds it to the list of virtual devices. * Returns a pointer to the created vio_dev or NULL if node has * NULL device_type or compatible fields. */ @@ -240,8 +241,6 @@ struct vio_dev * __devinit vio_register_device_node(struct device_node *of_node) if (viodev == NULL) return NULL; - viodev->dev.platform_data = of_node_get(of_node); - viodev->irq = irq_of_parse_and_map(of_node, 0); snprintf(viodev->dev.bus_id, BUS_ID_SIZE, "%x", *unit_address); @@ -254,7 +253,10 @@ struct vio_dev * __devinit vio_register_device_node(struct device_node *of_node) if (unit_address != NULL) viodev->unit_address = *unit_address; } - viodev->iommu_table = vio_build_iommu_table(viodev); + viodev->dev.archdata.of_node = of_node_get(of_node); + viodev->dev.archdata.dma_ops = &dma_iommu_ops; + viodev->dev.archdata.dma_data = vio_build_iommu_table(viodev); + viodev->dev.archdata.numa_node = of_node_to_nid(of_node); /* init generic 'struct device' fields: */ viodev->dev.parent = &vio_bus_device.dev; @@ -285,10 +287,11 @@ static int __init vio_bus_init(void) #ifdef CONFIG_PPC_ISERIES if (firmware_has_feature(FW_FEATURE_ISERIES)) { iommu_vio_init(); - vio_bus_device.iommu_table = &vio_iommu_table; + vio_bus_device.dev.archdata.dma_ops = &dma_iommu_ops; + vio_bus_device.dev.archdata.dma_data = &vio_iommu_table; iSeries_vio_dev = &vio_bus_device.dev; } -#endif +#endif /* CONFIG_PPC_ISERIES */ err = bus_register(&vio_bus_type); if (err) { @@ -336,7 +339,7 @@ static ssize_t name_show(struct device *dev, static ssize_t devspec_show(struct device *dev, struct device_attribute *attr, char *buf) { - struct device_node *of_node = dev->platform_data; + struct device_node *of_node = dev->archdata.of_node; return sprintf(buf, "%s\n", of_node ? of_node->full_name : "none"); } @@ -353,62 +356,6 @@ void __devinit vio_unregister_device(struct vio_dev *viodev) } EXPORT_SYMBOL(vio_unregister_device); -static dma_addr_t vio_map_single(struct device *dev, void *vaddr, - size_t size, enum dma_data_direction direction) -{ - return iommu_map_single(to_vio_dev(dev)->iommu_table, vaddr, size, - ~0ul, direction); -} - -static void vio_unmap_single(struct device *dev, dma_addr_t dma_handle, - size_t size, enum dma_data_direction direction) -{ - iommu_unmap_single(to_vio_dev(dev)->iommu_table, dma_handle, size, - direction); -} - -static int vio_map_sg(struct device *dev, struct scatterlist *sglist, - int nelems, enum dma_data_direction direction) -{ - return iommu_map_sg(dev, to_vio_dev(dev)->iommu_table, sglist, - nelems, ~0ul, direction); -} - -static void vio_unmap_sg(struct device *dev, struct scatterlist *sglist, - int nelems, enum dma_data_direction direction) -{ - iommu_unmap_sg(to_vio_dev(dev)->iommu_table, sglist, nelems, direction); -} - -static void *vio_alloc_coherent(struct device *dev, size_t size, - dma_addr_t *dma_handle, gfp_t flag) -{ - return iommu_alloc_coherent(to_vio_dev(dev)->iommu_table, size, - dma_handle, ~0ul, flag, -1); -} - -static void vio_free_coherent(struct device *dev, size_t size, - void *vaddr, dma_addr_t dma_handle) -{ - iommu_free_coherent(to_vio_dev(dev)->iommu_table, size, vaddr, - dma_handle); -} - -static int vio_dma_supported(struct device *dev, u64 mask) -{ - return 1; -} - -struct dma_mapping_ops vio_dma_ops = { - .alloc_coherent = vio_alloc_coherent, - .free_coherent = vio_free_coherent, - .map_single = vio_map_single, - .unmap_single = vio_unmap_single, - .map_sg = vio_map_sg, - .unmap_sg = vio_unmap_sg, - .dma_supported = vio_dma_supported, -}; - static int vio_bus_match(struct device *dev, struct device_driver *drv) { const struct vio_dev *vio_dev = to_vio_dev(dev); @@ -422,13 +369,14 @@ static int vio_hotplug(struct device *dev, char **envp, int num_envp, char *buffer, int buffer_size) { const struct vio_dev *vio_dev = to_vio_dev(dev); - struct device_node *dn = dev->platform_data; + struct device_node *dn; const char *cp; int length; if (!num_envp) return -ENOMEM; + dn = dev->archdata.of_node; if (!dn) return -ENODEV; cp = get_property(dn, "compatible", &length); @@ -465,7 +413,7 @@ struct bus_type vio_bus_type = { */ const void *vio_get_attribute(struct vio_dev *vdev, char *which, int *length) { - return get_property(vdev->dev.platform_data, which, length); + return get_property(vdev->dev.archdata.of_node, which, length); } EXPORT_SYMBOL(vio_get_attribute); diff --git a/arch/powerpc/platforms/cell/iommu.c b/arch/powerpc/platforms/cell/iommu.c index aca4c3db0dd..0e6ab8a55ef 100644 --- a/arch/powerpc/platforms/cell/iommu.c +++ b/arch/powerpc/platforms/cell/iommu.c @@ -255,9 +255,6 @@ static void enable_mapping(void __iomem *base, void __iomem *mmio_base) set_iost_origin(mmio_base); } -static void iommu_dev_setup_null(struct pci_dev *d) { } -static void iommu_bus_setup_null(struct pci_bus *b) { } - struct cell_iommu { unsigned long base; unsigned long mmio_base; @@ -306,12 +303,15 @@ static void cell_do_map_iommu(struct cell_iommu *iommu, } } -static void iommu_devnode_setup(struct device_node *d) +static void pci_dma_cell_bus_setup(struct pci_bus *b) { const unsigned int *ioid; unsigned long map_start, map_size, token; const unsigned long *dma_window; struct cell_iommu *iommu; + struct device_node *d; + + d = pci_bus_to_OF_node(b); ioid = get_property(d, "ioid", NULL); if (!ioid) @@ -330,12 +330,6 @@ static void iommu_devnode_setup(struct device_node *d) cell_do_map_iommu(iommu, *ioid, map_start, map_size); } -static void iommu_bus_setup(struct pci_bus *b) -{ - struct device_node *d = (struct device_node *)b->sysdata; - iommu_devnode_setup(d); -} - static int cell_map_iommu_hardcoded(int num_nodes) { @@ -499,16 +493,13 @@ void cell_init_iommu(void) if (setup_bus) { pr_debug("%s: IOMMU mapping activated\n", __FUNCTION__); - ppc_md.iommu_dev_setup = iommu_dev_setup_null; - ppc_md.iommu_bus_setup = iommu_bus_setup; + ppc_md.pci_dma_bus_setup = pci_dma_cell_bus_setup; } else { pr_debug("%s: IOMMU mapping activated, " "no device action necessary\n", __FUNCTION__); /* Direct I/O, IOMMU off */ - ppc_md.iommu_dev_setup = iommu_dev_setup_null; - ppc_md.iommu_bus_setup = iommu_bus_setup_null; } } - pci_dma_ops = cell_iommu_ops; + pci_dma_ops = &cell_iommu_ops; } diff --git a/arch/powerpc/platforms/iseries/iommu.c b/arch/powerpc/platforms/iseries/iommu.c index 218817d13c5..ee0a4e42e4f 100644 --- a/arch/powerpc/platforms/iseries/iommu.c +++ b/arch/powerpc/platforms/iseries/iommu.c @@ -27,6 +27,7 @@ #include #include #include +#include #include #include @@ -168,7 +169,7 @@ static struct iommu_table *iommu_table_find(struct iommu_table * tbl) } -void iommu_devnode_init_iSeries(struct device_node *dn) +void iommu_devnode_init_iSeries(struct pci_dev *pdev, struct device_node *dn) { struct iommu_table *tbl; struct pci_dn *pdn = PCI_DN(dn); @@ -186,19 +187,14 @@ void iommu_devnode_init_iSeries(struct device_node *dn) pdn->iommu_table = iommu_init_table(tbl, -1); else kfree(tbl); + pdev->dev.archdata.dma_data = pdn->iommu_table; } #endif -static void iommu_dev_setup_iSeries(struct pci_dev *dev) { } -static void iommu_bus_setup_iSeries(struct pci_bus *bus) { } - void iommu_init_early_iSeries(void) { ppc_md.tce_build = tce_build_iSeries; ppc_md.tce_free = tce_free_iSeries; - ppc_md.iommu_dev_setup = iommu_dev_setup_iSeries; - ppc_md.iommu_bus_setup = iommu_bus_setup_iSeries; - - pci_iommu_init(); + pci_dma_ops = &dma_iommu_ops; } diff --git a/arch/powerpc/platforms/iseries/pci.c b/arch/powerpc/platforms/iseries/pci.c index 4aa165e010d..a90ae42a7bc 100644 --- a/arch/powerpc/platforms/iseries/pci.c +++ b/arch/powerpc/platforms/iseries/pci.c @@ -253,7 +253,7 @@ void __init iSeries_pci_final_fixup(void) PCI_DN(node)->pcidev = pdev; allocate_device_bars(pdev); iSeries_Device_Information(pdev, DeviceCount); - iommu_devnode_init_iSeries(node); + iommu_devnode_init_iSeries(pdev, node); } else printk("PCI: Device Tree not found for 0x%016lX\n", (unsigned long)pdev); diff --git a/arch/powerpc/platforms/pasemi/setup.c b/arch/powerpc/platforms/pasemi/setup.c index eb2457567f8..89d6e295dbf 100644 --- a/arch/powerpc/platforms/pasemi/setup.c +++ b/arch/powerpc/platforms/pasemi/setup.c @@ -26,6 +26,7 @@ #include #include #include +#include #include #include @@ -71,6 +72,9 @@ void __init pas_setup_arch(void) /* Setup SMP callback */ smp_ops = &pas_smp_ops; #endif + /* no iommu yet */ + pci_dma_ops = &dma_direct_ops; + /* Lookup PCI hosts */ pas_pci_init(); @@ -81,17 +85,6 @@ void __init pas_setup_arch(void) printk(KERN_DEBUG "Using default idle loop\n"); } -static void iommu_dev_setup_null(struct pci_dev *dev) { } -static void iommu_bus_setup_null(struct pci_bus *bus) { } - -static void __init pas_init_early(void) -{ - /* No iommu code yet */ - ppc_md.iommu_dev_setup = iommu_dev_setup_null; - ppc_md.iommu_bus_setup = iommu_bus_setup_null; - pci_direct_iommu_init(); -} - /* No legacy IO on our parts */ static int pas_check_legacy_ioport(unsigned int baseport) { @@ -173,7 +166,6 @@ define_machine(pas) { .name = "PA Semi PA6T-1682M", .probe = pas_probe, .setup_arch = pas_setup_arch, - .init_early = pas_init_early, .init_IRQ = pas_init_IRQ, .get_irq = mpic_get_irq, .restart = pas_restart, diff --git a/arch/powerpc/platforms/pseries/iommu.c b/arch/powerpc/platforms/pseries/iommu.c index 556c279a789..3c95392f4f4 100644 --- a/arch/powerpc/platforms/pseries/iommu.c +++ b/arch/powerpc/platforms/pseries/iommu.c @@ -309,7 +309,7 @@ static void iommu_table_setparms_lpar(struct pci_controller *phb, tbl->it_size = size >> IOMMU_PAGE_SHIFT; } -static void iommu_bus_setup_pSeries(struct pci_bus *bus) +static void pci_dma_bus_setup_pSeries(struct pci_bus *bus) { struct device_node *dn; struct iommu_table *tbl; @@ -318,10 +318,9 @@ static void iommu_bus_setup_pSeries(struct pci_bus *bus) struct pci_dn *pci; int children; - DBG("iommu_bus_setup_pSeries, bus %p, bus->self %p\n", bus, bus->self); - dn = pci_bus_to_OF_node(bus); - pci = PCI_DN(dn); + + DBG("pci_dma_bus_setup_pSeries: setting up bus %s\n", dn->full_name); if (bus->self) { /* This is not a root bus, any setup will be done for the @@ -329,6 +328,7 @@ static void iommu_bus_setup_pSeries(struct pci_bus *bus) */ return; } + pci = PCI_DN(dn); /* Check if the ISA bus on the system is under * this PHB. @@ -390,17 +390,17 @@ static void iommu_bus_setup_pSeries(struct pci_bus *bus) } -static void iommu_bus_setup_pSeriesLP(struct pci_bus *bus) +static void pci_dma_bus_setup_pSeriesLP(struct pci_bus *bus) { struct iommu_table *tbl; struct device_node *dn, *pdn; struct pci_dn *ppci; const void *dma_window = NULL; - DBG("iommu_bus_setup_pSeriesLP, bus %p, bus->self %p\n", bus, bus->self); - dn = pci_bus_to_OF_node(bus); + DBG("pci_dma_bus_setup_pSeriesLP: setting up bus %s\n", dn->full_name); + /* Find nearest ibm,dma-window, walking up the device tree */ for (pdn = dn; pdn != NULL; pdn = pdn->parent) { dma_window = get_property(pdn, "ibm,dma-window", NULL); @@ -409,11 +409,15 @@ static void iommu_bus_setup_pSeriesLP(struct pci_bus *bus) } if (dma_window == NULL) { - DBG("iommu_bus_setup_pSeriesLP: bus %s seems to have no ibm,dma-window property\n", dn->full_name); + DBG(" no ibm,dma-window property !\n"); return; } ppci = PCI_DN(pdn); + + DBG(" parent is %s, iommu_table: 0x%p\n", + pdn->full_name, ppci->iommu_table); + if (!ppci->iommu_table) { /* Bussubno hasn't been copied yet. * Do it now because iommu_table_setparms_lpar needs it. @@ -427,6 +431,7 @@ static void iommu_bus_setup_pSeriesLP(struct pci_bus *bus) iommu_table_setparms_lpar(ppci->phb, pdn, tbl, dma_window); ppci->iommu_table = iommu_init_table(tbl, ppci->phb->node); + DBG(" created table: %p\n", ppci->iommu_table); } if (pdn != dn) @@ -434,27 +439,27 @@ static void iommu_bus_setup_pSeriesLP(struct pci_bus *bus) } -static void iommu_dev_setup_pSeries(struct pci_dev *dev) +static void pci_dma_dev_setup_pSeries(struct pci_dev *dev) { - struct device_node *dn, *mydn; + struct device_node *dn; struct iommu_table *tbl; - DBG("iommu_dev_setup_pSeries, dev %p (%s)\n", dev, pci_name(dev)); + DBG("pci_dma_dev_setup_pSeries: %s\n", pci_name(dev)); - mydn = dn = pci_device_to_OF_node(dev); + dn = dev->dev.archdata.of_node; /* If we're the direct child of a root bus, then we need to allocate * an iommu table ourselves. The bus setup code should have setup * the window sizes already. */ if (!dev->bus->self) { + struct pci_controller *phb = PCI_DN(dn)->phb; + DBG(" --> first child, no bridge. Allocating iommu table.\n"); tbl = kmalloc_node(sizeof(struct iommu_table), GFP_KERNEL, - PCI_DN(dn)->phb->node); - iommu_table_setparms(PCI_DN(dn)->phb, dn, tbl); - PCI_DN(dn)->iommu_table = iommu_init_table(tbl, - PCI_DN(dn)->phb->node); - + phb->node); + iommu_table_setparms(phb, dn, tbl); + dev->dev.archdata.dma_data = iommu_init_table(tbl, phb->node); return; } @@ -465,11 +470,11 @@ static void iommu_dev_setup_pSeries(struct pci_dev *dev) while (dn && PCI_DN(dn) && PCI_DN(dn)->iommu_table == NULL) dn = dn->parent; - if (dn && PCI_DN(dn)) { - PCI_DN(mydn)->iommu_table = PCI_DN(dn)->iommu_table; - } else { - DBG("iommu_dev_setup_pSeries, dev %p (%s) has no iommu table\n", dev, pci_name(dev)); - } + if (dn && PCI_DN(dn)) + dev->dev.archdata.dma_data = PCI_DN(dn)->iommu_table; + else + printk(KERN_WARNING "iommu: Device %s has no iommu table\n", + pci_name(dev)); } static int iommu_reconfig_notifier(struct notifier_block *nb, unsigned long action, void *node) @@ -495,13 +500,15 @@ static struct notifier_block iommu_reconfig_nb = { .notifier_call = iommu_reconfig_notifier, }; -static void iommu_dev_setup_pSeriesLP(struct pci_dev *dev) +static void pci_dma_dev_setup_pSeriesLP(struct pci_dev *dev) { struct device_node *pdn, *dn; struct iommu_table *tbl; const void *dma_window = NULL; struct pci_dn *pci; + DBG("pci_dma_dev_setup_pSeriesLP: %s\n", pci_name(dev)); + /* dev setup for LPAR is a little tricky, since the device tree might * contain the dma-window properties per-device and not neccesarily * for the bus. So we need to search upwards in the tree until we @@ -509,9 +516,7 @@ static void iommu_dev_setup_pSeriesLP(struct pci_dev *dev) * already allocated. */ dn = pci_device_to_OF_node(dev); - - DBG("iommu_dev_setup_pSeriesLP, dev %p (%s) %s\n", - dev, pci_name(dev), dn->full_name); + DBG(" node is %s\n", dn->full_name); for (pdn = dn; pdn && PCI_DN(pdn) && !PCI_DN(pdn)->iommu_table; pdn = pdn->parent) { @@ -520,16 +525,17 @@ static void iommu_dev_setup_pSeriesLP(struct pci_dev *dev) break; } + DBG(" parent is %s\n", pdn->full_name); + /* Check for parent == NULL so we don't try to setup the empty EADS * slots on POWER4 machines. */ if (dma_window == NULL || pdn->parent == NULL) { - DBG("No dma window for device, linking to parent\n"); - PCI_DN(dn)->iommu_table = PCI_DN(pdn)->iommu_table; + DBG(" no dma window for device, linking to parent\n"); + dev->dev.archdata.dma_data = PCI_DN(pdn)->iommu_table; return; - } else { - DBG("Found DMA window, allocating table\n"); } + DBG(" found DMA window, table: %p\n", pci->iommu_table); pci = PCI_DN(pdn); if (!pci->iommu_table) { @@ -542,24 +548,20 @@ static void iommu_dev_setup_pSeriesLP(struct pci_dev *dev) iommu_table_setparms_lpar(pci->phb, pdn, tbl, dma_window); pci->iommu_table = iommu_init_table(tbl, pci->phb->node); + DBG(" created table: %p\n", pci->iommu_table); } - if (pdn != dn) - PCI_DN(dn)->iommu_table = pci->iommu_table; + dev->dev.archdata.dma_data = pci->iommu_table; } -static void iommu_bus_setup_null(struct pci_bus *b) { } -static void iommu_dev_setup_null(struct pci_dev *d) { } - /* These are called very early. */ void iommu_init_early_pSeries(void) { if (of_chosen && get_property(of_chosen, "linux,iommu-off", NULL)) { /* Direct I/O, IOMMU off */ - ppc_md.iommu_dev_setup = iommu_dev_setup_null; - ppc_md.iommu_bus_setup = iommu_bus_setup_null; - pci_direct_iommu_init(); - + ppc_md.pci_dma_dev_setup = NULL; + ppc_md.pci_dma_bus_setup = NULL; + pci_dma_ops = &dma_direct_ops; return; } @@ -572,19 +574,19 @@ void iommu_init_early_pSeries(void) ppc_md.tce_free = tce_free_pSeriesLP; } ppc_md.tce_get = tce_get_pSeriesLP; - ppc_md.iommu_bus_setup = iommu_bus_setup_pSeriesLP; - ppc_md.iommu_dev_setup = iommu_dev_setup_pSeriesLP; + ppc_md.pci_dma_bus_setup = pci_dma_bus_setup_pSeriesLP; + ppc_md.pci_dma_dev_setup = pci_dma_dev_setup_pSeriesLP; } else { ppc_md.tce_build = tce_build_pSeries; ppc_md.tce_free = tce_free_pSeries; ppc_md.tce_get = tce_get_pseries; - ppc_md.iommu_bus_setup = iommu_bus_setup_pSeries; - ppc_md.iommu_dev_setup = iommu_dev_setup_pSeries; + ppc_md.pci_dma_bus_setup = pci_dma_bus_setup_pSeries; + ppc_md.pci_dma_dev_setup = pci_dma_dev_setup_pSeries; } pSeries_reconfig_notifier_register(&iommu_reconfig_nb); - pci_iommu_init(); + pci_dma_ops = &dma_iommu_ops; } diff --git a/arch/powerpc/platforms/pseries/pci_dlpar.c b/arch/powerpc/platforms/pseries/pci_dlpar.c index 6bfacc21708..bb0cb5c5b56 100644 --- a/arch/powerpc/platforms/pseries/pci_dlpar.c +++ b/arch/powerpc/platforms/pseries/pci_dlpar.c @@ -93,8 +93,8 @@ pcibios_fixup_new_pci_devices(struct pci_bus *bus, int fix_bus) if (list_empty(&dev->global_list)) { int i; - /* Need to setup IOMMU tables */ - ppc_md.iommu_dev_setup(dev); + /* Fill device archdata and setup iommu table */ + pcibios_setup_new_device(dev); if(fix_bus) pcibios_fixup_device_resources(dev, bus); diff --git a/arch/powerpc/sysdev/dart_iommu.c b/arch/powerpc/sysdev/dart_iommu.c index 572b7846cc7..ac784bb5728 100644 --- a/arch/powerpc/sysdev/dart_iommu.c +++ b/arch/powerpc/sysdev/dart_iommu.c @@ -289,24 +289,15 @@ static void iommu_table_dart_setup(void) set_bit(iommu_table_dart.it_size - 1, iommu_table_dart.it_map); } -static void iommu_dev_setup_dart(struct pci_dev *dev) +static void pci_dma_dev_setup_dart(struct pci_dev *dev) { - struct device_node *dn; - /* We only have one iommu table on the mac for now, which makes * things simple. Setup all PCI devices to point to this table - * - * We must use pci_device_to_OF_node() to make sure that - * we get the real "final" pointer to the device in the - * pci_dev sysdata and not the temporary PHB one */ - dn = pci_device_to_OF_node(dev); - - if (dn) - PCI_DN(dn)->iommu_table = &iommu_table_dart; + dev->dev.archdata.dma_data = &iommu_table_dart; } -static void iommu_bus_setup_dart(struct pci_bus *bus) +static void pci_dma_bus_setup_dart(struct pci_bus *bus) { struct device_node *dn; @@ -321,9 +312,6 @@ static void iommu_bus_setup_dart(struct pci_bus *bus) PCI_DN(dn)->iommu_table = &iommu_table_dart; } -static void iommu_dev_setup_null(struct pci_dev *dev) { } -static void iommu_bus_setup_null(struct pci_bus *bus) { } - void iommu_init_early_dart(void) { struct device_node *dn; @@ -344,22 +332,21 @@ void iommu_init_early_dart(void) /* Initialize the DART HW */ if (dart_init(dn) == 0) { - ppc_md.iommu_dev_setup = iommu_dev_setup_dart; - ppc_md.iommu_bus_setup = iommu_bus_setup_dart; + ppc_md.pci_dma_dev_setup = pci_dma_dev_setup_dart; + ppc_md.pci_dma_bus_setup = pci_dma_bus_setup_dart; /* Setup pci_dma ops */ - pci_iommu_init(); - + pci_dma_ops = &dma_iommu_ops; return; } bail: /* If init failed, use direct iommu and null setup functions */ - ppc_md.iommu_dev_setup = iommu_dev_setup_null; - ppc_md.iommu_bus_setup = iommu_bus_setup_null; + ppc_md.pci_dma_dev_setup = NULL; + ppc_md.pci_dma_bus_setup = NULL; /* Setup pci_dma ops */ - pci_direct_iommu_init(); + pci_dma_ops = &dma_direct_ops; } diff --git a/include/asm-powerpc/device.h b/include/asm-powerpc/device.h index d8f9872b0e2..228ab2a315b 100644 --- a/include/asm-powerpc/device.h +++ b/include/asm-powerpc/device.h @@ -3,5 +3,22 @@ * * This file is released under the GPLv2 */ -#include +#ifndef _ASM_POWERPC_DEVICE_H +#define _ASM_POWERPC_DEVICE_H +struct dma_mapping_ops; +struct device_node; + +struct dev_archdata { + /* Optional pointer to an OF device node */ + struct device_node *of_node; + + /* DMA operations on that device */ + struct dma_mapping_ops *dma_ops; + void *dma_data; + + /* NUMA node if applicable */ + int numa_node; +}; + +#endif /* _ASM_POWERPC_DEVICE_H */ diff --git a/include/asm-powerpc/dma-mapping.h b/include/asm-powerpc/dma-mapping.h index 2ab9baf78bb..8367810c994 100644 --- a/include/asm-powerpc/dma-mapping.h +++ b/include/asm-powerpc/dma-mapping.h @@ -44,26 +44,148 @@ extern void __dma_sync_page(struct page *page, unsigned long offset, #endif /* ! CONFIG_NOT_COHERENT_CACHE */ #ifdef CONFIG_PPC64 +/* + * DMA operations are abstracted for G5 vs. i/pSeries, PCI vs. VIO + */ +struct dma_mapping_ops { + void * (*alloc_coherent)(struct device *dev, size_t size, + dma_addr_t *dma_handle, gfp_t flag); + void (*free_coherent)(struct device *dev, size_t size, + void *vaddr, dma_addr_t dma_handle); + dma_addr_t (*map_single)(struct device *dev, void *ptr, + size_t size, enum dma_data_direction direction); + void (*unmap_single)(struct device *dev, dma_addr_t dma_addr, + size_t size, enum dma_data_direction direction); + int (*map_sg)(struct device *dev, struct scatterlist *sg, + int nents, enum dma_data_direction direction); + void (*unmap_sg)(struct device *dev, struct scatterlist *sg, + int nents, enum dma_data_direction direction); + int (*dma_supported)(struct device *dev, u64 mask); + int (*dac_dma_supported)(struct device *dev, u64 mask); + int (*set_dma_mask)(struct device *dev, u64 dma_mask); +}; + +static inline struct dma_mapping_ops *get_dma_ops(struct device *dev) +{ + /* We don't handle the NULL dev case for ISA for now. We could + * do it via an out of line call but it is not needed for now. The + * only ISA DMA device we support is the floppy and we have a hack + * in the floppy driver directly to get a device for us. + */ + if (unlikely(dev == NULL || dev->archdata.dma_ops == NULL)) + return NULL; + return dev->archdata.dma_ops; +} + +static inline int dma_supported(struct device *dev, u64 mask) +{ + struct dma_mapping_ops *dma_ops = get_dma_ops(dev); + + if (unlikely(dma_ops == NULL)) + return 0; + if (dma_ops->dma_supported == NULL) + return 1; + return dma_ops->dma_supported(dev, mask); +} + +static inline int dma_set_mask(struct device *dev, u64 dma_mask) +{ + struct dma_mapping_ops *dma_ops = get_dma_ops(dev); + + if (unlikely(dma_ops == NULL)) + return -EIO; + if (dma_ops->set_dma_mask != NULL) + return dma_ops->set_dma_mask(dev, dma_mask); + if (!dev->dma_mask || !dma_supported(dev, *dev->dma_mask)) + return -EIO; + *dev->dma_mask = dma_mask; + return 0; +} + +static inline void *dma_alloc_coherent(struct device *dev, size_t size, + dma_addr_t *dma_handle, gfp_t flag) +{ + struct dma_mapping_ops *dma_ops = get_dma_ops(dev); + + BUG_ON(!dma_ops); + return dma_ops->alloc_coherent(dev, size, dma_handle, flag); +} + +static inline void dma_free_coherent(struct device *dev, size_t size, + void *cpu_addr, dma_addr_t dma_handle) +{ + struct dma_mapping_ops *dma_ops = get_dma_ops(dev); + + BUG_ON(!dma_ops); + dma_ops->free_coherent(dev, size, cpu_addr, dma_handle); +} + +static inline dma_addr_t dma_map_single(struct device *dev, void *cpu_addr, + size_t size, + enum dma_data_direction direction) +{ + struct dma_mapping_ops *dma_ops = get_dma_ops(dev); + + BUG_ON(!dma_ops); + return dma_ops->map_single(dev, cpu_addr, size, direction); +} + +static inline void dma_unmap_single(struct device *dev, dma_addr_t dma_addr, + size_t size, + enum dma_data_direction direction) +{ + struct dma_mapping_ops *dma_ops = get_dma_ops(dev); + + BUG_ON(!dma_ops); + dma_ops->unmap_single(dev, dma_addr, size, direction); +} + +static inline dma_addr_t dma_map_page(struct device *dev, struct page *page, + unsigned long offset, size_t size, + enum dma_data_direction direction) +{ + struct dma_mapping_ops *dma_ops = get_dma_ops(dev); + + BUG_ON(!dma_ops); + return dma_ops->map_single(dev, page_address(page) + offset, size, + direction); +} + +static inline void dma_unmap_page(struct device *dev, dma_addr_t dma_address, + size_t size, + enum dma_data_direction direction) +{ + struct dma_mapping_ops *dma_ops = get_dma_ops(dev); + + BUG_ON(!dma_ops); + dma_ops->unmap_single(dev, dma_address, size, direction); +} + +static inline int dma_map_sg(struct device *dev, struct scatterlist *sg, + int nents, enum dma_data_direction direction) +{ + struct dma_mapping_ops *dma_ops = get_dma_ops(dev); + + BUG_ON(!dma_ops); + return dma_ops->map_sg(dev, sg, nents, direction); +} + +static inline void dma_unmap_sg(struct device *dev, struct scatterlist *sg, + int nhwentries, + enum dma_data_direction direction) +{ + struct dma_mapping_ops *dma_ops = get_dma_ops(dev); + + BUG_ON(!dma_ops); + dma_ops->unmap_sg(dev, sg, nhwentries, direction); +} -extern int dma_supported(struct device *dev, u64 mask); -extern int dma_set_mask(struct device *dev, u64 dma_mask); -extern void *dma_alloc_coherent(struct device *dev, size_t size, - dma_addr_t *dma_handle, gfp_t flag); -extern void dma_free_coherent(struct device *dev, size_t size, void *cpu_addr, - dma_addr_t dma_handle); -extern dma_addr_t dma_map_single(struct device *dev, void *cpu_addr, - size_t size, enum dma_data_direction direction); -extern void dma_unmap_single(struct device *dev, dma_addr_t dma_addr, - size_t size, enum dma_data_direction direction); -extern dma_addr_t dma_map_page(struct device *dev, struct page *page, - unsigned long offset, size_t size, - enum dma_data_direction direction); -extern void dma_unmap_page(struct device *dev, dma_addr_t dma_address, - size_t size, enum dma_data_direction direction); -extern int dma_map_sg(struct device *dev, struct scatterlist *sg, int nents, - enum dma_data_direction direction); -extern void dma_unmap_sg(struct device *dev, struct scatterlist *sg, - int nhwentries, enum dma_data_direction direction); + +/* + * Available generic sets of operations + */ +extern struct dma_mapping_ops dma_iommu_ops; +extern struct dma_mapping_ops dma_direct_ops; #else /* CONFIG_PPC64 */ @@ -261,25 +383,5 @@ static inline void dma_cache_sync(void *vaddr, size_t size, __dma_sync(vaddr, size, (int)direction); } -/* - * DMA operations are abstracted for G5 vs. i/pSeries, PCI vs. VIO - */ -struct dma_mapping_ops { - void * (*alloc_coherent)(struct device *dev, size_t size, - dma_addr_t *dma_handle, gfp_t flag); - void (*free_coherent)(struct device *dev, size_t size, - void *vaddr, dma_addr_t dma_handle); - dma_addr_t (*map_single)(struct device *dev, void *ptr, - size_t size, enum dma_data_direction direction); - void (*unmap_single)(struct device *dev, dma_addr_t dma_addr, - size_t size, enum dma_data_direction direction); - int (*map_sg)(struct device *dev, struct scatterlist *sg, - int nents, enum dma_data_direction direction); - void (*unmap_sg)(struct device *dev, struct scatterlist *sg, - int nents, enum dma_data_direction direction); - int (*dma_supported)(struct device *dev, u64 mask); - int (*dac_dma_supported)(struct device *dev, u64 mask); -}; - #endif /* __KERNEL__ */ #endif /* _ASM_DMA_MAPPING_H */ diff --git a/include/asm-powerpc/ibmebus.h b/include/asm-powerpc/ibmebus.h index 3493429b70f..66112114b8c 100644 --- a/include/asm-powerpc/ibmebus.h +++ b/include/asm-powerpc/ibmebus.h @@ -44,7 +44,6 @@ #include #include -extern struct dma_mapping_ops ibmebus_dma_ops; extern struct bus_type ibmebus_bus_type; struct ibmebus_dev { diff --git a/include/asm-powerpc/iommu.h b/include/asm-powerpc/iommu.h index 19e6f7e0a60..19403183dbb 100644 --- a/include/asm-powerpc/iommu.h +++ b/include/asm-powerpc/iommu.h @@ -79,22 +79,22 @@ extern void iommu_free_table(struct device_node *dn); extern struct iommu_table *iommu_init_table(struct iommu_table * tbl, int nid); -extern int iommu_map_sg(struct device *dev, struct iommu_table *tbl, - struct scatterlist *sglist, int nelems, unsigned long mask, - enum dma_data_direction direction); +extern int iommu_map_sg(struct iommu_table *tbl, struct scatterlist *sglist, + int nelems, unsigned long mask, + enum dma_data_direction direction); extern void iommu_unmap_sg(struct iommu_table *tbl, struct scatterlist *sglist, - int nelems, enum dma_data_direction direction); + int nelems, enum dma_data_direction direction); extern void *iommu_alloc_coherent(struct iommu_table *tbl, size_t size, - dma_addr_t *dma_handle, unsigned long mask, - gfp_t flag, int node); + dma_addr_t *dma_handle, unsigned long mask, + gfp_t flag, int node); extern void iommu_free_coherent(struct iommu_table *tbl, size_t size, - void *vaddr, dma_addr_t dma_handle); + void *vaddr, dma_addr_t dma_handle); extern dma_addr_t iommu_map_single(struct iommu_table *tbl, void *vaddr, - size_t size, unsigned long mask, - enum dma_data_direction direction); + size_t size, unsigned long mask, + enum dma_data_direction direction); extern void iommu_unmap_single(struct iommu_table *tbl, dma_addr_t dma_handle, - size_t size, enum dma_data_direction direction); + size_t size, enum dma_data_direction direction); extern void iommu_init_early_pSeries(void); extern void iommu_init_early_iSeries(void); diff --git a/include/asm-powerpc/iseries/iommu.h b/include/asm-powerpc/iseries/iommu.h index 0edbfe10cb3..6e323a13ac3 100644 --- a/include/asm-powerpc/iseries/iommu.h +++ b/include/asm-powerpc/iseries/iommu.h @@ -21,11 +21,13 @@ * Boston, MA 02111-1307 USA */ +struct pci_dev; struct device_node; struct iommu_table; /* Creates table for an individual device node */ -extern void iommu_devnode_init_iSeries(struct device_node *dn); +extern void iommu_devnode_init_iSeries(struct pci_dev *pdev, + struct device_node *dn); /* Get table parameters from HV */ extern void iommu_table_getparms_iSeries(unsigned long busno, diff --git a/include/asm-powerpc/machdep.h b/include/asm-powerpc/machdep.h index 162205f6264..ccc29744656 100644 --- a/include/asm-powerpc/machdep.h +++ b/include/asm-powerpc/machdep.h @@ -84,8 +84,8 @@ struct machdep_calls { unsigned long (*tce_get)(struct iommu_table *tbl, long index); void (*tce_flush)(struct iommu_table *tbl); - void (*iommu_dev_setup)(struct pci_dev *dev); - void (*iommu_bus_setup)(struct pci_bus *bus); + void (*pci_dma_dev_setup)(struct pci_dev *dev); + void (*pci_dma_bus_setup)(struct pci_bus *bus); #endif /* CONFIG_PPC64 */ int (*probe)(void); diff --git a/include/asm-powerpc/of_device.h b/include/asm-powerpc/of_device.h index 1ef7e9edd1a..a889b2005bf 100644 --- a/include/asm-powerpc/of_device.h +++ b/include/asm-powerpc/of_device.h @@ -14,7 +14,7 @@ */ struct of_device { - struct device_node *node; /* OF device node */ + struct device_node *node; /* to be obsoleted */ u64 dma_mask; /* DMA mask */ struct device dev; /* Generic device interface */ }; diff --git a/include/asm-powerpc/pci.h b/include/asm-powerpc/pci.h index c7728605149..16f13319c76 100644 --- a/include/asm-powerpc/pci.h +++ b/include/asm-powerpc/pci.h @@ -70,15 +70,15 @@ static inline int pci_get_legacy_ide_irq(struct pci_dev *dev, int channel) */ #define PCI_DISABLE_MWI -extern struct dma_mapping_ops pci_dma_ops; +extern struct dma_mapping_ops *pci_dma_ops; /* For DAC DMA, we currently don't support it by default, but * we let 64-bit platforms override this. */ static inline int pci_dac_dma_supported(struct pci_dev *hwdev,u64 mask) { - if (pci_dma_ops.dac_dma_supported) - return pci_dma_ops.dac_dma_supported(&hwdev->dev, mask); + if (pci_dma_ops && pci_dma_ops->dac_dma_supported) + return pci_dma_ops->dac_dma_supported(&hwdev->dev, mask); return 0; } @@ -210,6 +210,8 @@ extern int remap_bus_range(struct pci_bus *bus); extern void pcibios_fixup_device_resources(struct pci_dev *dev, struct pci_bus *bus); +extern void pcibios_setup_new_device(struct pci_dev *dev); + extern void pcibios_claim_one_bus(struct pci_bus *b); extern struct pci_controller *init_phb_dynamic(struct device_node *dn); diff --git a/include/asm-powerpc/vio.h b/include/asm-powerpc/vio.h index 4b51d42e141..0117b544ecb 100644 --- a/include/asm-powerpc/vio.h +++ b/include/asm-powerpc/vio.h @@ -45,7 +45,6 @@ struct iommu_table; * The vio_dev structure is used to describe virtual I/O devices. */ struct vio_dev { - struct iommu_table *iommu_table; /* vio_map_* uses this */ const char *name; const char *type; uint32_t unit_address; -- cgit v1.2.3-70-g09d2 From 868108784ccf0add6ac593bfbc2eb5a0804af48d Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Sat, 11 Nov 2006 17:25:04 +1100 Subject: [POWERPC] Add DMA ops support for of_platform_device to Cell This patch adds a bus device notifier to the of_platform bus type on cell to setup the DMA operations for of_platform_devices. We currently use the PCI operations as Cell use a special version of them that happens to be suitable for our needs. Signed-off-by: Benjamin Herrenschmidt Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/cell/setup.c | 37 ++++++++++++++++++++++++++++++++++--- 1 file changed, 34 insertions(+), 3 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/platforms/cell/setup.c b/arch/powerpc/platforms/cell/setup.c index d704bc19a64..b39753f16d4 100644 --- a/arch/powerpc/platforms/cell/setup.c +++ b/arch/powerpc/platforms/cell/setup.c @@ -30,6 +30,7 @@ #include #include #include +#include #include #include @@ -82,10 +83,41 @@ static void cell_progress(char *s, unsigned short hex) printk("*** %04x : %s\n", hex, s ? s : ""); } +static int cell_of_bus_notify(struct notifier_block *nb, unsigned long action, + void *data) +{ + struct device *dev = data; + + if (action != BUS_NOTIFY_ADD_DEVICE) + return 0; + + /* For now, we just use the PCI DMA ops for everything, though + * we'll need something better when we have a real iommu + * implementation. + */ + dev->archdata.dma_ops = pci_dma_ops; + + return 0; +} + +static struct notifier_block cell_of_bus_notifier = { + .notifier_call = cell_of_bus_notify +}; + + static int __init cell_publish_devices(void) { - if (machine_is(cell)) - of_platform_bus_probe(NULL, NULL, NULL); + if (!machine_is(cell)) + return 0; + + /* Register callbacks on OF platform device addition/removal + * to handle linking them to the right DMA operations + */ + bus_register_notifier(&of_platform_bus_type, &cell_of_bus_notifier); + + /* Publish OF platform devices for southbridge IOs */ + of_platform_bus_probe(NULL, NULL, NULL); + return 0; } device_initcall(cell_publish_devices); @@ -154,7 +186,6 @@ static void __init cell_setup_arch(void) #ifdef CONFIG_SMP smp_init_cell(); #endif - /* init to some ~sane value until calibrate_delay() runs */ loops_per_jiffy = 50000000; -- cgit v1.2.3-70-g09d2 From e557a1c96c82f4d1a91b5c2e2e0275b5999c297d Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Sat, 11 Nov 2006 17:25:05 +1100 Subject: [POWERPC] Resolve the parent address of a PCI bus range When parsing the OF "ranges" properties of PCI host busses to determine the mapping of a PCI bus, we need to translate the "parent" address using the prom_parse.c routines in order to obtain a CPU physical address. This wasn't necessary while PCI busses were always at the root of the device-tree but this is no longer the case on Cell where they can be anywhere in the tree. Signed-off-by: Benjamin Herrenschmidt Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/pci_64.c | 6 +----- 1 file changed, 1 insertion(+), 5 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/kernel/pci_64.c b/arch/powerpc/kernel/pci_64.c index 88b78484b94..5ffab8787b9 100644 --- a/arch/powerpc/kernel/pci_64.c +++ b/arch/powerpc/kernel/pci_64.c @@ -967,11 +967,7 @@ void __devinit pci_process_bridge_OF_ranges(struct pci_controller *hose, res = NULL; pci_space = ranges[0]; pci_addr = ((unsigned long)ranges[1] << 32) | ranges[2]; - - cpu_phys_addr = ranges[3]; - if (na >= 2) - cpu_phys_addr = (cpu_phys_addr << 32) | ranges[4]; - + cpu_phys_addr = of_translate_address(dev, &ranges[3]); size = ((unsigned long)ranges[na+3] << 32) | ranges[na+4]; ranges += np; if (size == 0) -- cgit v1.2.3-70-g09d2 From 6506e7102fd57b138979f131d751014462181202 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Sat, 11 Nov 2006 17:25:06 +1100 Subject: [POWERPC] Resolve the BUID for RTAS PCI config space accesses The BUID is the first entry of a PCI host bridge "reg" property. Now that PCI busses can be anywhere in the device-tree, we need to fully translate the value there to a CPU physical address before we can use it with RTAS. Signed-off-by: Benjamin Herrenschmidt Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/rtas_pci.c | 27 ++++----------------------- 1 file changed, 4 insertions(+), 23 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/kernel/rtas_pci.c b/arch/powerpc/kernel/rtas_pci.c index b4a0de79c06..2576e12d725 100644 --- a/arch/powerpc/kernel/rtas_pci.c +++ b/arch/powerpc/kernel/rtas_pci.c @@ -231,32 +231,13 @@ void __init init_pci_config_tokens (void) unsigned long __devinit get_phb_buid (struct device_node *phb) { - int addr_cells; - const unsigned int *buid_vals; - unsigned int len; - unsigned long buid; - - if (ibm_read_pci_config == -1) return 0; + struct resource r; - /* PHB's will always be children of the root node, - * or so it is promised by the current firmware. */ - if (phb->parent == NULL) + if (ibm_read_pci_config == -1) return 0; - if (phb->parent->parent) - return 0; - - buid_vals = get_property(phb, "reg", &len); - if (buid_vals == NULL) + if (of_address_to_resource(phb, 0, &r)) return 0; - - addr_cells = prom_n_addr_cells(phb); - if (addr_cells == 1) { - buid = (unsigned long) buid_vals[0]; - } else { - buid = (((unsigned long)buid_vals[0]) << 32UL) | - (((unsigned long)buid_vals[1]) & 0xffffffff); - } - return buid; + return r.start; } static int phb_set_bus_ranges(struct device_node *dev, -- cgit v1.2.3-70-g09d2 From 803d4573e60bc890d7fbc040ad1c18c2dc7f8279 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Sat, 11 Nov 2006 17:25:07 +1100 Subject: [POWERPC] Add "parent" struct device for PCI host bridges Add a "parent" struct device to our PCI host bridge data structure so that PCI can be rooted off another device in sysfs. Note that arch/ppc doesn't use it, only arch/powerpc, though it's available for both 32 and 64 bits. Signed-off-by: Benjamin Herrenschmidt Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/pci_32.c | 5 ++++- arch/powerpc/kernel/pci_64.c | 2 +- include/asm-powerpc/pci-bridge.h | 1 + include/asm-ppc/pci-bridge.h | 1 + 4 files changed, 7 insertions(+), 2 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/kernel/pci_32.c b/arch/powerpc/kernel/pci_32.c index d32cd500d8b..0ad101a5fc5 100644 --- a/arch/powerpc/kernel/pci_32.c +++ b/arch/powerpc/kernel/pci_32.c @@ -1269,7 +1269,10 @@ pcibios_init(void) if (pci_assign_all_buses) hose->first_busno = next_busno; hose->last_busno = 0xff; - bus = pci_scan_bus(hose->first_busno, hose->ops, hose); + bus = pci_scan_bus_parented(hose->parent, hose->first_busno, + hose->ops, hose); + if (bus) + pci_bus_add_devices(bus); hose->last_busno = bus->subordinate; if (pci_assign_all_buses || next_busno <= hose->last_busno) next_busno = hose->last_busno + pcibios_assign_bus_offset; diff --git a/arch/powerpc/kernel/pci_64.c b/arch/powerpc/kernel/pci_64.c index 5ffab8787b9..74e580d25c1 100644 --- a/arch/powerpc/kernel/pci_64.c +++ b/arch/powerpc/kernel/pci_64.c @@ -513,7 +513,7 @@ void __devinit scan_phb(struct pci_controller *hose) DBG("Scanning PHB %s\n", node ? node->full_name : ""); - bus = pci_create_bus(NULL, hose->first_busno, hose->ops, node); + bus = pci_create_bus(hose->parent, hose->first_busno, hose->ops, node); if (bus == NULL) { printk(KERN_ERR "Failed to create bus for PCI domain %04x\n", hose->global_number); diff --git a/include/asm-powerpc/pci-bridge.h b/include/asm-powerpc/pci-bridge.h index 86ee46b09b8..7bb7f900980 100644 --- a/include/asm-powerpc/pci-bridge.h +++ b/include/asm-powerpc/pci-bridge.h @@ -25,6 +25,7 @@ struct pci_controller { int node; void *arch_data; struct list_head list_node; + struct device *parent; int first_busno; int last_busno; diff --git a/include/asm-ppc/pci-bridge.h b/include/asm-ppc/pci-bridge.h index 9d5230689b3..6c955d0c1ef 100644 --- a/include/asm-ppc/pci-bridge.h +++ b/include/asm-ppc/pci-bridge.h @@ -43,6 +43,7 @@ struct pci_controller { struct pci_controller *next; struct pci_bus *bus; void *arch_data; + struct device *parent; int first_busno; int last_busno; -- cgit v1.2.3-70-g09d2 From 4c9d2800be5dfabf26acdeb401cbabe9edc1dcf2 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Sat, 11 Nov 2006 17:25:08 +1100 Subject: [POWERPC] Generic OF platform driver for PCI host bridges. When enabled in Kconfig, it will pick up any of_platform_device matching it's match list (currently type "pci", "pcix", "pcie", or "ht" and setup a PHB for it. Platform must provide a ppc_md.pci_setup_phb() for it to work (for doing the necessary initialisations specific to a given PHB like setting up the config space ops). It's currently only available on 64 bits as the 32 bits PCI code can't quite cope with it in it's current form. I will fix that later. Signed-off-by: Benjamin Herrenschmidt Signed-off-by: Paul Mackerras --- arch/powerpc/Kconfig | 6 ++ arch/powerpc/kernel/of_platform.c | 103 +++++++++++++++++++++++++++++ arch/powerpc/kernel/pci_64.c | 9 +++ arch/powerpc/kernel/rtas_pci.c | 7 +- arch/powerpc/platforms/cell/setup.c | 1 + arch/powerpc/platforms/pseries/pci_dlpar.c | 2 +- include/asm-powerpc/machdep.h | 4 ++ include/asm-powerpc/ppc-pci.h | 12 ++-- 8 files changed, 134 insertions(+), 10 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index 65588a6bd2f..3d26ba7ad76 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -223,6 +223,11 @@ config PPC_DCR depends on PPC_DCR_NATIVE || PPC_DCR_MMIO default y +config PPC_OF_PLATFORM_PCI + bool + depends on PPC64 # not supported on 32 bits yet + default n + config BOOKE bool depends on E200 || E500 @@ -469,6 +474,7 @@ config PPC_CELL_NATIVE bool select PPC_CELL select PPC_DCR_MMIO + select PPC_OF_PLATFORM_PCI select MPIC default n diff --git a/arch/powerpc/kernel/of_platform.c b/arch/powerpc/kernel/of_platform.c index 7a0e77af7c9..6029543c1b5 100644 --- a/arch/powerpc/kernel/of_platform.c +++ b/arch/powerpc/kernel/of_platform.c @@ -1,6 +1,7 @@ /* * Copyright (C) 2006 Benjamin Herrenschmidt, IBM Corp. * + * and Arnd Bergmann, IBM Corp. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License @@ -17,12 +18,15 @@ #include #include #include +#include #include #include #include #include #include +#include +#include /* * The list of OF IDs below is used for matching bus types in the @@ -377,3 +381,102 @@ struct of_device *of_find_device_by_phandle(phandle ph) return NULL; } EXPORT_SYMBOL(of_find_device_by_phandle); + + +#ifdef CONFIG_PPC_OF_PLATFORM_PCI + +/* The probing of PCI controllers from of_platform is currently + * 64 bits only, mostly due to gratuitous differences between + * the 32 and 64 bits PCI code on PowerPC and the 32 bits one + * lacking some bits needed here. + */ + +static int __devinit of_pci_phb_probe(struct of_device *dev, + const struct of_device_id *match) +{ + struct pci_controller *phb; + + /* Check if we can do that ... */ + if (ppc_md.pci_setup_phb == NULL) + return -ENODEV; + + printk(KERN_INFO "Setting up PCI bus %s\n", dev->node->full_name); + + /* Alloc and setup PHB data structure */ + phb = pcibios_alloc_controller(dev->node); + if (!phb) + return -ENODEV; + + /* Setup parent in sysfs */ + phb->parent = &dev->dev; + + /* Setup the PHB using arch provided callback */ + if (ppc_md.pci_setup_phb(phb)) { + pcibios_free_controller(phb); + return -ENODEV; + } + + /* Process "ranges" property */ + pci_process_bridge_OF_ranges(phb, dev->node, 0); + + /* Setup IO space. + * This will not work properly for ISA IOs, something needs to be done + * about it if we ever generalize that way of probing PCI brigdes + */ + pci_setup_phb_io_dynamic(phb, 0); + + /* Init pci_dn data structures */ + pci_devs_phb_init_dynamic(phb); + + /* Register devices with EEH */ +#ifdef CONFIG_EEH + if (dev->node->child) + eeh_add_device_tree_early(dev->node); +#endif /* CONFIG_EEH */ + + /* Scan the bus */ + scan_phb(phb); + + /* Claim resources. This might need some rework as well depending + * wether we are doing probe-only or not, like assigning unassigned + * resources etc... + */ + pcibios_claim_one_bus(phb->bus); + + /* Finish EEH setup */ +#ifdef CONFIG_EEH + eeh_add_device_tree_late(phb->bus); +#endif + + /* Add probed PCI devices to the device model */ + pci_bus_add_devices(phb->bus); + + return 0; +} + +static struct of_device_id of_pci_phb_ids[] = { + { .type = "pci", }, + { .type = "pcix", }, + { .type = "pcie", }, + { .type = "pciex", }, + { .type = "ht", }, + {} +}; + +static struct of_platform_driver of_pci_phb_driver = { + .name = "of-pci", + .match_table = of_pci_phb_ids, + .probe = of_pci_phb_probe, + .driver = { + .multithread_probe = 1, + }, +}; + +static __init int of_pci_phb_init(void) +{ + return of_register_platform_driver(&of_pci_phb_driver); +} + +device_initcall(of_pci_phb_init); + +#endif /* CONFIG_PPC_OF_PLATFORM_PCI */ diff --git a/arch/powerpc/kernel/pci_64.c b/arch/powerpc/kernel/pci_64.c index 74e580d25c1..d800e19ea56 100644 --- a/arch/powerpc/kernel/pci_64.c +++ b/arch/powerpc/kernel/pci_64.c @@ -210,6 +210,10 @@ struct pci_controller * pcibios_alloc_controller(struct device_node *dev) void pcibios_free_controller(struct pci_controller *phb) { + spin_lock(&hose_spinlock); + list_del(&phb->list_node); + spin_unlock(&hose_spinlock); + if (phb->is_dynamic) kfree(phb); } @@ -1242,6 +1246,11 @@ static void __devinit do_bus_setup(struct pci_bus *bus) void __devinit pcibios_fixup_bus(struct pci_bus *bus) { struct pci_dev *dev = bus->self; + struct device_node *np; + + np = pci_bus_to_OF_node(bus); + + DBG("pcibios_fixup_bus(%s)\n", np ? np->full_name : ""); if (dev && pci_probe_only && (dev->class >> 8) == PCI_CLASS_BRIDGE_PCI) { diff --git a/arch/powerpc/kernel/rtas_pci.c b/arch/powerpc/kernel/rtas_pci.c index 2576e12d725..03cacc25a0a 100644 --- a/arch/powerpc/kernel/rtas_pci.c +++ b/arch/powerpc/kernel/rtas_pci.c @@ -257,8 +257,10 @@ static int phb_set_bus_ranges(struct device_node *dev, return 0; } -int __devinit setup_phb(struct device_node *dev, struct pci_controller *phb) +int __devinit rtas_setup_phb(struct pci_controller *phb) { + struct device_node *dev = phb->arch_data; + if (is_python(dev)) python_countermeasures(dev); @@ -290,7 +292,7 @@ unsigned long __init find_and_init_phbs(void) phb = pcibios_alloc_controller(node); if (!phb) continue; - setup_phb(node, phb); + rtas_setup_phb(phb); pci_process_bridge_OF_ranges(phb, node, 0); pci_setup_phb_io(phb, index == 0); index++; @@ -362,7 +364,6 @@ int pcibios_remove_root_bus(struct pci_controller *phb) } } - list_del(&phb->list_node); pcibios_free_controller(phb); return 0; diff --git a/arch/powerpc/platforms/cell/setup.c b/arch/powerpc/platforms/cell/setup.c index b39753f16d4..7e18420166c 100644 --- a/arch/powerpc/platforms/cell/setup.c +++ b/arch/powerpc/platforms/cell/setup.c @@ -256,6 +256,7 @@ define_machine(cell) { .check_legacy_ioport = cell_check_legacy_ioport, .progress = cell_progress, .init_IRQ = cell_init_irq, + .pci_setup_phb = rtas_setup_phb, #ifdef CONFIG_KEXEC .machine_kexec = default_machine_kexec, .machine_kexec_prepare = default_machine_kexec_prepare, diff --git a/arch/powerpc/platforms/pseries/pci_dlpar.c b/arch/powerpc/platforms/pseries/pci_dlpar.c index bb0cb5c5b56..ac56b868913 100644 --- a/arch/powerpc/platforms/pseries/pci_dlpar.c +++ b/arch/powerpc/platforms/pseries/pci_dlpar.c @@ -195,7 +195,7 @@ struct pci_controller * __devinit init_phb_dynamic(struct device_node *dn) phb = pcibios_alloc_controller(dn); if (!phb) return NULL; - setup_phb(dn, phb); + rtas_setup_phb(phb); pci_process_bridge_OF_ranges(phb, dn, 0); pci_setup_phb_io_dynamic(phb, primary); diff --git a/include/asm-powerpc/machdep.h b/include/asm-powerpc/machdep.h index ccc29744656..23580cf5504 100644 --- a/include/asm-powerpc/machdep.h +++ b/include/asm-powerpc/machdep.h @@ -26,6 +26,7 @@ struct device_node; struct iommu_table; struct rtc_time; struct file; +struct pci_controller; #ifdef CONFIG_KEXEC struct kimage; #endif @@ -107,6 +108,9 @@ struct machdep_calls { int (*pci_probe_mode)(struct pci_bus *); void (*pci_irq_fixup)(struct pci_dev *dev); + /* To setup PHBs when using automatic OF platform driver for PCI */ + int (*pci_setup_phb)(struct pci_controller *host); + void (*restart)(char *cmd); void (*power_off)(void); void (*halt)(void); diff --git a/include/asm-powerpc/ppc-pci.h b/include/asm-powerpc/ppc-pci.h index 8894d1d4226..ab6eddb518c 100644 --- a/include/asm-powerpc/ppc-pci.h +++ b/include/asm-powerpc/ppc-pci.h @@ -36,14 +36,14 @@ typedef void *(*traverse_func)(struct device_node *me, void *data); void *traverse_pci_devices(struct device_node *start, traverse_func pre, void *data); -void pci_devs_phb_init(void); -void pci_devs_phb_init_dynamic(struct pci_controller *phb); -int setup_phb(struct device_node *dev, struct pci_controller *phb); -void __devinit scan_phb(struct pci_controller *hose); +extern void pci_devs_phb_init(void); +extern void pci_devs_phb_init_dynamic(struct pci_controller *phb); +extern void scan_phb(struct pci_controller *hose); /* From rtas_pci.h */ -void init_pci_config_tokens (void); -unsigned long get_phb_buid (struct device_node *); +extern void init_pci_config_tokens (void); +extern unsigned long get_phb_buid (struct device_node *); +extern int rtas_setup_phb(struct pci_controller *phb); /* From pSeries_pci.h */ extern void pSeries_final_fixup(void); -- cgit v1.2.3-70-g09d2 From d03f387eb321189bc2ba278b6ca82f1a45cf19d6 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Sat, 11 Nov 2006 17:25:09 +1100 Subject: [POWERPC] Cell fixup DMA offset for new southbridge This patch makes the Cell DMA code work on both the Spider and the Axon south bridges by turning cell_dma_valid into a variable instead of a constant. This is a temporary patch until we have full iommu support. Signed-off-by: Benjamin Herrenschmidt Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/cell/iommu.c | 14 +++++++++++--- arch/powerpc/platforms/cell/iommu.h | 8 +++++--- 2 files changed, 16 insertions(+), 6 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/platforms/cell/iommu.c b/arch/powerpc/platforms/cell/iommu.c index 0e6ab8a55ef..e3ea5311476 100644 --- a/arch/powerpc/platforms/cell/iommu.c +++ b/arch/powerpc/platforms/cell/iommu.c @@ -46,6 +46,8 @@ #include "iommu.h" +static dma_addr_t cell_dma_valid = SPIDER_DMA_VALID; + static inline unsigned long get_iopt_entry(unsigned long real_address, unsigned long ioid, unsigned long prot) @@ -423,7 +425,7 @@ static void *cell_alloc_coherent(struct device *hwdev, size_t size, ret = (void *)__get_free_pages(flag, get_order(size)); if (ret != NULL) { memset(ret, 0, size); - *dma_handle = virt_to_abs(ret) | CELL_DMA_VALID; + *dma_handle = virt_to_abs(ret) | cell_dma_valid; } return ret; } @@ -437,7 +439,7 @@ static void cell_free_coherent(struct device *hwdev, size_t size, static dma_addr_t cell_map_single(struct device *hwdev, void *ptr, size_t size, enum dma_data_direction direction) { - return virt_to_abs(ptr) | CELL_DMA_VALID; + return virt_to_abs(ptr) | cell_dma_valid; } static void cell_unmap_single(struct device *hwdev, dma_addr_t dma_addr, @@ -452,7 +454,7 @@ static int cell_map_sg(struct device *hwdev, struct scatterlist *sg, for (i = 0; i < nents; i++, sg++) { sg->dma_address = (page_to_phys(sg->page) + sg->offset) - | CELL_DMA_VALID; + | cell_dma_valid; sg->dma_length = sg->length; } @@ -483,6 +485,12 @@ void cell_init_iommu(void) { int setup_bus = 0; + /* If we have an Axon bridge, clear the DMA valid mask. This is fairly + * hackish but will work well enough until we have proper iommu code. + */ + if (of_find_node_by_name(NULL, "axon")) + cell_dma_valid = 0; + if (of_find_node_by_path("/mambo")) { pr_info("Not using iommu on systemsim\n"); } else { diff --git a/arch/powerpc/platforms/cell/iommu.h b/arch/powerpc/platforms/cell/iommu.h index 490d77abfe8..2a9ab95604a 100644 --- a/arch/powerpc/platforms/cell/iommu.h +++ b/arch/powerpc/platforms/cell/iommu.h @@ -53,9 +53,11 @@ enum { IOC_ST_ORIGIN = 0x918, IOC_CONF = 0x930, - /* The high bit needs to be set on every DMA address, - only 2GB are addressable */ - CELL_DMA_VALID = 0x80000000, + /* The high bit needs to be set on every DMA address when using + * a spider bridge and only 2GB are addressable with the current + * iommu code. + */ + SPIDER_DMA_VALID = 0x80000000, CELL_DMA_MASK = 0x7fffffff, }; -- cgit v1.2.3-70-g09d2 From 4cb3cee03d558fd457cb58f56c80a2a09a66110c Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Sat, 11 Nov 2006 17:25:10 +1100 Subject: [POWERPC] Allow hooking of PCI MMIO & PIO accessors on 64 bits This patch reworks the way iSeries hooks on PCI IO operations (both MMIO and PIO) and provides a generic way for other platforms to do so (we have need to do that for various other platforms). While reworking the IO ops, I ended up doing some spring cleaning in io.h and eeh.h which I might want to split into 2 or 3 patches (among others, eeh.h had a lot of useless stuff in it). A side effect is that EEH for PIO should work now (it used to pass IO ports down to the eeh address check functions which is bogus). Also, new are MMIO "repeat" ops, which other archs like ARM already had, and that we have too now: readsb, readsw, readsl, writesb, writesw, writesl. In the long run, I might also make EEH use the hooks instead of wrapping at the toplevel, which would make things even cleaner and relegate EEH completely in platforms/iseries, but we have to measure the performance impact there (though it's really only on MMIO reads) Since I also need to hook on ioremap, I shuffled the functions a bit there. I introduced ioremap_flags() to use by drivers who want to pass explicit flags to ioremap (and it can be hooked). The old __ioremap() is still there as a low level and cannot be hooked, thus drivers who use it should migrate unless they know they want the low level version. The patch "arch provides generic iomap missing accessors" (should be number 4 in this series) is a pre-requisite to provide full iomap API support with this patch. Signed-off-by: Benjamin Herrenschmidt Signed-off-by: Paul Mackerras --- arch/powerpc/Kconfig | 10 + arch/powerpc/kernel/Makefile | 6 +- arch/powerpc/kernel/io.c | 18 +- arch/powerpc/kernel/pci_64.c | 2 +- arch/powerpc/kernel/setup_64.c | 7 + arch/powerpc/mm/pgtable_64.c | 46 ++- arch/powerpc/platforms/iseries/pci.c | 370 ++++++++----------- arch/powerpc/platforms/iseries/setup.c | 12 + include/asm-powerpc/eeh.h | 118 ++---- include/asm-powerpc/ide.h | 7 + include/asm-powerpc/io-defs.h | 56 +++ include/asm-powerpc/io.h | 641 +++++++++++++++++++-------------- include/asm-powerpc/machdep.h | 4 + include/asm-ppc/io.h | 12 +- 14 files changed, 701 insertions(+), 608 deletions(-) create mode 100644 include/asm-powerpc/io-defs.h (limited to 'arch/powerpc') diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index 3d26ba7ad76..3e89d9d3493 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -394,6 +394,7 @@ config PPC_PSERIES config PPC_ISERIES bool "IBM Legacy iSeries" depends on PPC_MULTIPLATFORM && PPC64 + select PPC_INDIRECT_IO config PPC_CHRP bool "Common Hardware Reference Platform (CHRP) based machines" @@ -548,6 +549,15 @@ config PPC_970_NAP bool default n +config PPC_INDIRECT_IO + bool + select GENERIC_IOMAP + default n + +config GENERIC_IOMAP + bool + default n + source "drivers/cpufreq/Kconfig" config CPU_FREQ_PMAC diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile index eba8d118e21..600954df07a 100644 --- a/arch/powerpc/kernel/Makefile +++ b/arch/powerpc/kernel/Makefile @@ -62,7 +62,7 @@ obj-$(CONFIG_PPC_UDBG_16550) += legacy_serial.o udbg_16550.o module-$(CONFIG_PPC64) += module_64.o obj-$(CONFIG_MODULES) += $(module-y) -pci64-$(CONFIG_PPC64) += pci_64.o pci_dn.o iomap.o +pci64-$(CONFIG_PPC64) += pci_64.o pci_dn.o pci32-$(CONFIG_PPC32) := pci_32.o obj-$(CONFIG_PCI) += $(pci64-y) $(pci32-y) kexec-$(CONFIG_PPC64) := machine_kexec_64.o @@ -71,6 +71,10 @@ obj-$(CONFIG_KEXEC) += machine_kexec.o crash.o $(kexec-y) obj-$(CONFIG_AUDIT) += audit.o obj64-$(CONFIG_AUDIT) += compat_audit.o +ifneq ($(CONFIG_PPC_INDIRECT_IO),y) +pci64-$(CONFIG_PPC64) += iomap.o +endif + ifeq ($(CONFIG_PPC_ISERIES),y) $(obj)/head_64.o: $(obj)/lparmap.s AFLAGS_head_64.o += -I$(obj) diff --git a/arch/powerpc/kernel/io.c b/arch/powerpc/kernel/io.c index e98180686b3..c1aa07524c2 100644 --- a/arch/powerpc/kernel/io.c +++ b/arch/powerpc/kernel/io.c @@ -25,13 +25,11 @@ #include #include -void _insb(volatile u8 __iomem *port, void *buf, long count) +void _insb(const volatile u8 __iomem *port, void *buf, long count) { u8 *tbuf = buf; u8 tmp; - BUG_ON(firmware_has_feature(FW_FEATURE_ISERIES)); - if (unlikely(count <= 0)) return; asm volatile("sync"); @@ -48,8 +46,6 @@ void _outsb(volatile u8 __iomem *port, const void *buf, long count) { const u8 *tbuf = buf; - BUG_ON(firmware_has_feature(FW_FEATURE_ISERIES)); - if (unlikely(count <= 0)) return; asm volatile("sync"); @@ -60,13 +56,11 @@ void _outsb(volatile u8 __iomem *port, const void *buf, long count) } EXPORT_SYMBOL(_outsb); -void _insw_ns(volatile u16 __iomem *port, void *buf, long count) +void _insw_ns(const volatile u16 __iomem *port, void *buf, long count) { u16 *tbuf = buf; u16 tmp; - BUG_ON(firmware_has_feature(FW_FEATURE_ISERIES)); - if (unlikely(count <= 0)) return; asm volatile("sync"); @@ -83,8 +77,6 @@ void _outsw_ns(volatile u16 __iomem *port, const void *buf, long count) { const u16 *tbuf = buf; - BUG_ON(firmware_has_feature(FW_FEATURE_ISERIES)); - if (unlikely(count <= 0)) return; asm volatile("sync"); @@ -95,13 +87,11 @@ void _outsw_ns(volatile u16 __iomem *port, const void *buf, long count) } EXPORT_SYMBOL(_outsw_ns); -void _insl_ns(volatile u32 __iomem *port, void *buf, long count) +void _insl_ns(const volatile u32 __iomem *port, void *buf, long count) { u32 *tbuf = buf; u32 tmp; - BUG_ON(firmware_has_feature(FW_FEATURE_ISERIES)); - if (unlikely(count <= 0)) return; asm volatile("sync"); @@ -118,8 +108,6 @@ void _outsl_ns(volatile u32 __iomem *port, const void *buf, long count) { const u32 *tbuf = buf; - BUG_ON(firmware_has_feature(FW_FEATURE_ISERIES)); - if (unlikely(count <= 0)) return; asm volatile("sync"); diff --git a/arch/powerpc/kernel/pci_64.c b/arch/powerpc/kernel/pci_64.c index d800e19ea56..afee470de92 100644 --- a/arch/powerpc/kernel/pci_64.c +++ b/arch/powerpc/kernel/pci_64.c @@ -1137,7 +1137,7 @@ int unmap_bus_range(struct pci_bus *bus) if (get_bus_io_range(bus, &start_phys, &start_virt, &size)) return 1; - if (iounmap_explicit((void __iomem *) start_virt, size)) + if (__iounmap_explicit((void __iomem *) start_virt, size)) return 1; return 0; diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c index f7ad64acf47..f602a53b1b7 100644 --- a/arch/powerpc/kernel/setup_64.c +++ b/arch/powerpc/kernel/setup_64.c @@ -599,3 +599,10 @@ void __init setup_per_cpu_areas(void) } } #endif + + +#ifdef CONFIG_PPC_INDIRECT_IO +struct ppc_pci_io ppc_pci_io; +EXPORT_SYMBOL(ppc_pci_io); +#endif /* CONFIG_PPC_INDIRECT_IO */ + diff --git a/arch/powerpc/mm/pgtable_64.c b/arch/powerpc/mm/pgtable_64.c index ac64f4aaa50..e9b21846ccb 100644 --- a/arch/powerpc/mm/pgtable_64.c +++ b/arch/powerpc/mm/pgtable_64.c @@ -129,22 +129,12 @@ static void __iomem * __ioremap_com(unsigned long addr, unsigned long pa, return (void __iomem *) (ea + (addr & ~PAGE_MASK)); } - -void __iomem * -ioremap(unsigned long addr, unsigned long size) -{ - return __ioremap(addr, size, _PAGE_NO_CACHE | _PAGE_GUARDED); -} - void __iomem * __ioremap(unsigned long addr, unsigned long size, unsigned long flags) { unsigned long pa, ea; void __iomem *ret; - if (firmware_has_feature(FW_FEATURE_ISERIES)) - return (void __iomem *)addr; - /* * Choose an address to map it to. * Once the imalloc system is running, we use it. @@ -178,6 +168,25 @@ void __iomem * __ioremap(unsigned long addr, unsigned long size, return ret; } + +void __iomem * ioremap(unsigned long addr, unsigned long size) +{ + unsigned long flags = _PAGE_NO_CACHE | _PAGE_GUARDED; + + if (ppc_md.ioremap) + return ppc_md.ioremap(addr, size, flags); + return __ioremap(addr, size, flags); +} + +void __iomem * ioremap_flags(unsigned long addr, unsigned long size, + unsigned long flags) +{ + if (ppc_md.ioremap) + return ppc_md.ioremap(addr, size, flags); + return __ioremap(addr, size, flags); +} + + #define IS_PAGE_ALIGNED(_val) ((_val) == ((_val) & PAGE_MASK)) int __ioremap_explicit(unsigned long pa, unsigned long ea, @@ -235,13 +244,10 @@ int __ioremap_explicit(unsigned long pa, unsigned long ea, * * XXX what about calls before mem_init_done (ie python_countermeasures()) */ -void iounmap(volatile void __iomem *token) +void __iounmap(void __iomem *token) { void *addr; - if (firmware_has_feature(FW_FEATURE_ISERIES)) - return; - if (!mem_init_done) return; @@ -250,6 +256,14 @@ void iounmap(volatile void __iomem *token) im_free(addr); } +void iounmap(void __iomem *token) +{ + if (ppc_md.iounmap) + ppc_md.iounmap(token); + else + __iounmap(token); +} + static int iounmap_subset_regions(unsigned long addr, unsigned long size) { struct vm_struct *area; @@ -268,7 +282,7 @@ static int iounmap_subset_regions(unsigned long addr, unsigned long size) return 0; } -int iounmap_explicit(volatile void __iomem *start, unsigned long size) +int __iounmap_explicit(void __iomem *start, unsigned long size) { struct vm_struct *area; unsigned long addr; @@ -303,8 +317,10 @@ int iounmap_explicit(volatile void __iomem *start, unsigned long size) } EXPORT_SYMBOL(ioremap); +EXPORT_SYMBOL(ioremap_flags); EXPORT_SYMBOL(__ioremap); EXPORT_SYMBOL(iounmap); +EXPORT_SYMBOL(__iounmap); void __iomem * reserve_phb_iospace(unsigned long size) { diff --git a/arch/powerpc/platforms/iseries/pci.c b/arch/powerpc/platforms/iseries/pci.c index a90ae42a7bc..4a06d9c3498 100644 --- a/arch/powerpc/platforms/iseries/pci.c +++ b/arch/powerpc/platforms/iseries/pci.c @@ -155,53 +155,6 @@ static void pci_Log_Error(char *Error_Text, int Bus, int SubBus, Error_Text, Bus, SubBus, AgentId, HvRc); } -/* - * iSeries_pcibios_init - * - * Description: - * This function checks for all possible system PCI host bridges that connect - * PCI buses. The system hypervisor is queried as to the guest partition - * ownership status. A pci_controller is built for any bus which is partially - * owned or fully owned by this guest partition. - */ -void iSeries_pcibios_init(void) -{ - struct pci_controller *phb; - struct device_node *root = of_find_node_by_path("/"); - struct device_node *node = NULL; - - if (root == NULL) { - printk(KERN_CRIT "iSeries_pcibios_init: can't find root " - "of device tree\n"); - return; - } - while ((node = of_get_next_child(root, node)) != NULL) { - HvBusNumber bus; - const u32 *busp; - - if ((node->type == NULL) || (strcmp(node->type, "pci") != 0)) - continue; - - busp = get_property(node, "bus-range", NULL); - if (busp == NULL) - continue; - bus = *busp; - printk("bus %d appears to exist\n", bus); - phb = pcibios_alloc_controller(node); - if (phb == NULL) - continue; - - phb->pci_mem_offset = phb->local_number = bus; - phb->first_busno = bus; - phb->last_busno = bus; - phb->ops = &iSeries_pci_ops; - } - - of_node_put(root); - - pci_devs_phb_init(); -} - /* * iSeries_pci_final_fixup(void) */ @@ -438,11 +391,7 @@ static inline struct device_node *xlate_iomm_address( /* * Read MM I/O Instructions for the iSeries * On MM I/O error, all ones are returned and iSeries_pci_IoError is cal - * else, data is returned in big Endian format. - * - * iSeries_Read_Byte = Read Byte ( 8 bit) - * iSeries_Read_Word = Read Word (16 bit) - * iSeries_Read_Long = Read Long (32 bit) + * else, data is returned in Big Endian format. */ static u8 iSeries_Read_Byte(const volatile void __iomem *IoAddress) { @@ -462,14 +411,15 @@ static u8 iSeries_Read_Byte(const volatile void __iomem *IoAddress) num_printed = 0; } if (num_printed++ < 10) - printk(KERN_ERR "iSeries_Read_Byte: invalid access at IO address %p\n", IoAddress); + printk(KERN_ERR "iSeries_Read_Byte: invalid access at IO address %p\n", + IoAddress); return 0xff; } do { HvCall3Ret16(HvCallPciBarLoad8, &ret, dsa, BarOffset, 0); } while (CheckReturnCode("RDB", DevNode, &retry, ret.rc) != 0); - return (u8)ret.value; + return ret.value; } static u16 iSeries_Read_Word(const volatile void __iomem *IoAddress) @@ -490,7 +440,8 @@ static u16 iSeries_Read_Word(const volatile void __iomem *IoAddress) num_printed = 0; } if (num_printed++ < 10) - printk(KERN_ERR "iSeries_Read_Word: invalid access at IO address %p\n", IoAddress); + printk(KERN_ERR "iSeries_Read_Word: invalid access at IO address %p\n", + IoAddress); return 0xffff; } do { @@ -498,7 +449,7 @@ static u16 iSeries_Read_Word(const volatile void __iomem *IoAddress) BarOffset, 0); } while (CheckReturnCode("RDW", DevNode, &retry, ret.rc) != 0); - return swab16((u16)ret.value); + return ret.value; } static u32 iSeries_Read_Long(const volatile void __iomem *IoAddress) @@ -519,7 +470,8 @@ static u32 iSeries_Read_Long(const volatile void __iomem *IoAddress) num_printed = 0; } if (num_printed++ < 10) - printk(KERN_ERR "iSeries_Read_Long: invalid access at IO address %p\n", IoAddress); + printk(KERN_ERR "iSeries_Read_Long: invalid access at IO address %p\n", + IoAddress); return 0xffffffff; } do { @@ -527,15 +479,12 @@ static u32 iSeries_Read_Long(const volatile void __iomem *IoAddress) BarOffset, 0); } while (CheckReturnCode("RDL", DevNode, &retry, ret.rc) != 0); - return swab32((u32)ret.value); + return ret.value; } /* * Write MM I/O Instructions for the iSeries * - * iSeries_Write_Byte = Write Byte (8 bit) - * iSeries_Write_Word = Write Word(16 bit) - * iSeries_Write_Long = Write Long(32 bit) */ static void iSeries_Write_Byte(u8 data, volatile void __iomem *IoAddress) { @@ -581,11 +530,12 @@ static void iSeries_Write_Word(u16 data, volatile void __iomem *IoAddress) num_printed = 0; } if (num_printed++ < 10) - printk(KERN_ERR "iSeries_Write_Word: invalid access at IO address %p\n", IoAddress); + printk(KERN_ERR "iSeries_Write_Word: invalid access at IO address %p\n", + IoAddress); return; } do { - rc = HvCall4(HvCallPciBarStore16, dsa, BarOffset, swab16(data), 0); + rc = HvCall4(HvCallPciBarStore16, dsa, BarOffset, data, 0); } while (CheckReturnCode("WWW", DevNode, &retry, rc) != 0); } @@ -607,231 +557,221 @@ static void iSeries_Write_Long(u32 data, volatile void __iomem *IoAddress) num_printed = 0; } if (num_printed++ < 10) - printk(KERN_ERR "iSeries_Write_Long: invalid access at IO address %p\n", IoAddress); + printk(KERN_ERR "iSeries_Write_Long: invalid access at IO address %p\n", + IoAddress); return; } do { - rc = HvCall4(HvCallPciBarStore32, dsa, BarOffset, swab32(data), 0); + rc = HvCall4(HvCallPciBarStore32, dsa, BarOffset, data, 0); } while (CheckReturnCode("WWL", DevNode, &retry, rc) != 0); } -extern unsigned char __raw_readb(const volatile void __iomem *addr) +static u8 iseries_readb(const volatile void __iomem *addr) { - BUG_ON(firmware_has_feature(FW_FEATURE_ISERIES)); - - return *(volatile unsigned char __force *)addr; + return iSeries_Read_Byte(addr); } -EXPORT_SYMBOL(__raw_readb); -extern unsigned short __raw_readw(const volatile void __iomem *addr) +static u16 iseries_readw(const volatile void __iomem *addr) { - BUG_ON(firmware_has_feature(FW_FEATURE_ISERIES)); - - return *(volatile unsigned short __force *)addr; + return le16_to_cpu(iSeries_Read_Word(addr)); } -EXPORT_SYMBOL(__raw_readw); -extern unsigned int __raw_readl(const volatile void __iomem *addr) +static u32 iseries_readl(const volatile void __iomem *addr) { - BUG_ON(firmware_has_feature(FW_FEATURE_ISERIES)); - - return *(volatile unsigned int __force *)addr; + return le32_to_cpu(iSeries_Read_Long(addr)); } -EXPORT_SYMBOL(__raw_readl); -extern unsigned long __raw_readq(const volatile void __iomem *addr) +static u16 iseries_readw_be(const volatile void __iomem *addr) { - BUG_ON(firmware_has_feature(FW_FEATURE_ISERIES)); - - return *(volatile unsigned long __force *)addr; + return iSeries_Read_Word(addr); } -EXPORT_SYMBOL(__raw_readq); -extern void __raw_writeb(unsigned char v, volatile void __iomem *addr) +static u32 iseries_readl_be(const volatile void __iomem *addr) { - BUG_ON(firmware_has_feature(FW_FEATURE_ISERIES)); - - *(volatile unsigned char __force *)addr = v; + return iSeries_Read_Long(addr); } -EXPORT_SYMBOL(__raw_writeb); -extern void __raw_writew(unsigned short v, volatile void __iomem *addr) +static void iseries_writeb(u8 data, volatile void __iomem *addr) { - BUG_ON(firmware_has_feature(FW_FEATURE_ISERIES)); - - *(volatile unsigned short __force *)addr = v; + iSeries_Write_Byte(data, addr); } -EXPORT_SYMBOL(__raw_writew); -extern void __raw_writel(unsigned int v, volatile void __iomem *addr) +static void iseries_writew(u16 data, volatile void __iomem *addr) { - BUG_ON(firmware_has_feature(FW_FEATURE_ISERIES)); - - *(volatile unsigned int __force *)addr = v; + iSeries_Write_Word(cpu_to_le16(data), addr); } -EXPORT_SYMBOL(__raw_writel); -extern void __raw_writeq(unsigned long v, volatile void __iomem *addr) +static void iseries_writel(u32 data, volatile void __iomem *addr) { - BUG_ON(firmware_has_feature(FW_FEATURE_ISERIES)); - - *(volatile unsigned long __force *)addr = v; + iSeries_Write_Long(cpu_to_le32(data), addr); } -EXPORT_SYMBOL(__raw_writeq); -int in_8(const volatile unsigned char __iomem *addr) +static void iseries_writew_be(u16 data, volatile void __iomem *addr) { - if (firmware_has_feature(FW_FEATURE_ISERIES)) - return iSeries_Read_Byte(addr); - return __in_8(addr); + iSeries_Write_Word(data, addr); } -EXPORT_SYMBOL(in_8); -void out_8(volatile unsigned char __iomem *addr, int val) +static void iseries_writel_be(u32 data, volatile void __iomem *addr) { - if (firmware_has_feature(FW_FEATURE_ISERIES)) - iSeries_Write_Byte(val, addr); - else - __out_8(addr, val); + iSeries_Write_Long(data, addr); } -EXPORT_SYMBOL(out_8); -int in_le16(const volatile unsigned short __iomem *addr) +static void iseries_readsb(const volatile void __iomem *addr, void *buf, + unsigned long count) { - if (firmware_has_feature(FW_FEATURE_ISERIES)) - return iSeries_Read_Word(addr); - return __in_le16(addr); + u8 *dst = buf; + while(count-- > 0) + *(dst++) = iSeries_Read_Byte(addr); } -EXPORT_SYMBOL(in_le16); -int in_be16(const volatile unsigned short __iomem *addr) +static void iseries_readsw(const volatile void __iomem *addr, void *buf, + unsigned long count) { - BUG_ON(firmware_has_feature(FW_FEATURE_ISERIES)); - - return __in_be16(addr); + u16 *dst = buf; + while(count-- > 0) + *(dst++) = iSeries_Read_Word(addr); } -EXPORT_SYMBOL(in_be16); -void out_le16(volatile unsigned short __iomem *addr, int val) +static void iseries_readsl(const volatile void __iomem *addr, void *buf, + unsigned long count) { - if (firmware_has_feature(FW_FEATURE_ISERIES)) - iSeries_Write_Word(val, addr); - else - __out_le16(addr, val); + u32 *dst = buf; + while(count-- > 0) + *(dst++) = iSeries_Read_Long(addr); } -EXPORT_SYMBOL(out_le16); -void out_be16(volatile unsigned short __iomem *addr, int val) +static void iseries_writesb(volatile void __iomem *addr, const void *buf, + unsigned long count) { - BUG_ON(firmware_has_feature(FW_FEATURE_ISERIES)); - - __out_be16(addr, val); + const u8 *src = buf; + while(count-- > 0) + iSeries_Write_Byte(*(src++), addr); } -EXPORT_SYMBOL(out_be16); -unsigned in_le32(const volatile unsigned __iomem *addr) +static void iseries_writesw(volatile void __iomem *addr, const void *buf, + unsigned long count) { - if (firmware_has_feature(FW_FEATURE_ISERIES)) - return iSeries_Read_Long(addr); - return __in_le32(addr); + const u16 *src = buf; + while(count-- > 0) + iSeries_Write_Word(*(src++), addr); } -EXPORT_SYMBOL(in_le32); -unsigned in_be32(const volatile unsigned __iomem *addr) +static void iseries_writesl(volatile void __iomem *addr, const void *buf, + unsigned long count) { - BUG_ON(firmware_has_feature(FW_FEATURE_ISERIES)); - - return __in_be32(addr); + const u32 *src = buf; + while(count-- > 0) + iSeries_Write_Long(*(src++), addr); } -EXPORT_SYMBOL(in_be32); -void out_le32(volatile unsigned __iomem *addr, int val) +static void iseries_memset_io(volatile void __iomem *addr, int c, + unsigned long n) { - if (firmware_has_feature(FW_FEATURE_ISERIES)) - iSeries_Write_Long(val, addr); - else - __out_le32(addr, val); -} -EXPORT_SYMBOL(out_le32); + volatile char __iomem *d = addr; -void out_be32(volatile unsigned __iomem *addr, int val) -{ - BUG_ON(firmware_has_feature(FW_FEATURE_ISERIES)); - - __out_be32(addr, val); + while (n-- > 0) + iSeries_Write_Byte(c, d++); } -EXPORT_SYMBOL(out_be32); -unsigned long in_le64(const volatile unsigned long __iomem *addr) +static void iseries_memcpy_fromio(void *dest, const volatile void __iomem *src, + unsigned long n) { - BUG_ON(firmware_has_feature(FW_FEATURE_ISERIES)); + char *d = dest; + const volatile char __iomem *s = src; - return __in_le64(addr); + while (n-- > 0) + *d++ = iSeries_Read_Byte(s++); } -EXPORT_SYMBOL(in_le64); -unsigned long in_be64(const volatile unsigned long __iomem *addr) +static void iseries_memcpy_toio(volatile void __iomem *dest, const void *src, + unsigned long n) { - BUG_ON(firmware_has_feature(FW_FEATURE_ISERIES)); + const char *s = src; + volatile char __iomem *d = dest; - return __in_be64(addr); + while (n-- > 0) + iSeries_Write_Byte(*s++, d++); } -EXPORT_SYMBOL(in_be64); - -void out_le64(volatile unsigned long __iomem *addr, unsigned long val) -{ - BUG_ON(firmware_has_feature(FW_FEATURE_ISERIES)); - __out_le64(addr, val); -} -EXPORT_SYMBOL(out_le64); +/* We only set MMIO ops. The default PIO ops will be default + * to the MMIO ops + pci_io_base which is 0 on iSeries as + * expected so both should work. + * + * Note that we don't implement the readq/writeq versions as + * I don't know of an HV call for doing so. Thus, the default + * operation will be used instead, which will fault a the value + * return by iSeries for MMIO addresses always hits a non mapped + * area. This is as good as the BUG() we used to have there. + */ +static struct ppc_pci_io __initdata iseries_pci_io = { + .readb = iseries_readb, + .readw = iseries_readw, + .readl = iseries_readl, + .readw_be = iseries_readw_be, + .readl_be = iseries_readl_be, + .writeb = iseries_writeb, + .writew = iseries_writew, + .writel = iseries_writel, + .writew_be = iseries_writew_be, + .writel_be = iseries_writel_be, + .readsb = iseries_readsb, + .readsw = iseries_readsw, + .readsl = iseries_readsl, + .writesb = iseries_writesb, + .writesw = iseries_writesw, + .writesl = iseries_writesl, + .memset_io = iseries_memset_io, + .memcpy_fromio = iseries_memcpy_fromio, + .memcpy_toio = iseries_memcpy_toio, +}; -void out_be64(volatile unsigned long __iomem *addr, unsigned long val) +/* + * iSeries_pcibios_init + * + * Description: + * This function checks for all possible system PCI host bridges that connect + * PCI buses. The system hypervisor is queried as to the guest partition + * ownership status. A pci_controller is built for any bus which is partially + * owned or fully owned by this guest partition. + */ +void __init iSeries_pcibios_init(void) { - BUG_ON(firmware_has_feature(FW_FEATURE_ISERIES)); + struct pci_controller *phb; + struct device_node *root = of_find_node_by_path("/"); + struct device_node *node = NULL; - __out_be64(addr, val); -} -EXPORT_SYMBOL(out_be64); + /* Install IO hooks */ + ppc_pci_io = iseries_pci_io; -void memset_io(volatile void __iomem *addr, int c, unsigned long n) -{ - if (firmware_has_feature(FW_FEATURE_ISERIES)) { - volatile char __iomem *d = addr; + if (root == NULL) { + printk(KERN_CRIT "iSeries_pcibios_init: can't find root " + "of device tree\n"); + return; + } + while ((node = of_get_next_child(root, node)) != NULL) { + HvBusNumber bus; + const u32 *busp; - while (n-- > 0) { - iSeries_Write_Byte(c, d++); - } - } else - eeh_memset_io(addr, c, n); -} -EXPORT_SYMBOL(memset_io); + if ((node->type == NULL) || (strcmp(node->type, "pci") != 0)) + continue; -void memcpy_fromio(void *dest, const volatile void __iomem *src, - unsigned long n) -{ - if (firmware_has_feature(FW_FEATURE_ISERIES)) { - char *d = dest; - const volatile char __iomem *s = src; + busp = get_property(node, "bus-range", NULL); + if (busp == NULL) + continue; + bus = *busp; + printk("bus %d appears to exist\n", bus); + phb = pcibios_alloc_controller(node); + if (phb == NULL) + continue; - while (n-- > 0) { - *d++ = iSeries_Read_Byte(s++); - } - } else - eeh_memcpy_fromio(dest, src, n); -} -EXPORT_SYMBOL(memcpy_fromio); + phb->pci_mem_offset = phb->local_number = bus; + phb->first_busno = bus; + phb->last_busno = bus; + phb->ops = &iSeries_pci_ops; + } -void memcpy_toio(volatile void __iomem *dest, const void *src, unsigned long n) -{ - if (firmware_has_feature(FW_FEATURE_ISERIES)) { - const char *s = src; - volatile char __iomem *d = dest; + of_node_put(root); - while (n-- > 0) { - iSeries_Write_Byte(*s++, d++); - } - } else - eeh_memcpy_toio(dest, src, n); + pci_devs_phb_init(); } -EXPORT_SYMBOL(memcpy_toio); + diff --git a/arch/powerpc/platforms/iseries/setup.c b/arch/powerpc/platforms/iseries/setup.c index cd8965ec9dd..2f16d9330cf 100644 --- a/arch/powerpc/platforms/iseries/setup.c +++ b/arch/powerpc/platforms/iseries/setup.c @@ -617,6 +617,16 @@ static void iseries_dedicated_idle(void) void __init iSeries_init_IRQ(void) { } #endif +static void __iomem *iseries_ioremap(unsigned long address, unsigned long size, + unsigned long flags) +{ + return (void __iomem *)address; +} + +static void iseries_iounmap(void __iomem *token) +{ +} + /* * iSeries has no legacy IO, anything calling this function has to * fail or bad things will happen @@ -655,6 +665,8 @@ define_machine(iseries) { .progress = iSeries_progress, .probe = iseries_probe, .check_legacy_ioport = iseries_check_legacy_ioport, + .ioremap = iseries_ioremap, + .iounmap = iseries_iounmap, /* XXX Implement enable_pmcs for iSeries */ }; diff --git a/include/asm-powerpc/eeh.h b/include/asm-powerpc/eeh.h index 6a784396660..66481bbf270 100644 --- a/include/asm-powerpc/eeh.h +++ b/include/asm-powerpc/eeh.h @@ -120,10 +120,6 @@ static inline u8 eeh_readb(const volatile void __iomem *addr) return eeh_check_failure(addr, val); return val; } -static inline void eeh_writeb(u8 val, volatile void __iomem *addr) -{ - out_8(addr, val); -} static inline u16 eeh_readw(const volatile void __iomem *addr) { @@ -132,21 +128,6 @@ static inline u16 eeh_readw(const volatile void __iomem *addr) return eeh_check_failure(addr, val); return val; } -static inline void eeh_writew(u16 val, volatile void __iomem *addr) -{ - out_le16(addr, val); -} -static inline u16 eeh_raw_readw(const volatile void __iomem *addr) -{ - u16 val = in_be16(addr); - if (EEH_POSSIBLE_ERROR(val, u16)) - return eeh_check_failure(addr, val); - return val; -} -static inline void eeh_raw_writew(u16 val, volatile void __iomem *addr) { - volatile u16 __iomem *vaddr = (volatile u16 __iomem *) addr; - out_be16(vaddr, val); -} static inline u32 eeh_readl(const volatile void __iomem *addr) { @@ -155,44 +136,38 @@ static inline u32 eeh_readl(const volatile void __iomem *addr) return eeh_check_failure(addr, val); return val; } -static inline void eeh_writel(u32 val, volatile void __iomem *addr) -{ - out_le32(addr, val); -} -static inline u32 eeh_raw_readl(const volatile void __iomem *addr) + +static inline u64 eeh_readq(const volatile void __iomem *addr) { - u32 val = in_be32(addr); - if (EEH_POSSIBLE_ERROR(val, u32)) + u64 val = in_le64(addr); + if (EEH_POSSIBLE_ERROR(val, u64)) return eeh_check_failure(addr, val); return val; } -static inline void eeh_raw_writel(u32 val, volatile void __iomem *addr) -{ - out_be32(addr, val); -} -static inline u64 eeh_readq(const volatile void __iomem *addr) +static inline u16 eeh_readw_be(const volatile void __iomem *addr) { - u64 val = in_le64(addr); - if (EEH_POSSIBLE_ERROR(val, u64)) + u16 val = in_be16(addr); + if (EEH_POSSIBLE_ERROR(val, u16)) return eeh_check_failure(addr, val); return val; } -static inline void eeh_writeq(u64 val, volatile void __iomem *addr) + +static inline u32 eeh_readl_be(const volatile void __iomem *addr) { - out_le64(addr, val); + u32 val = in_be32(addr); + if (EEH_POSSIBLE_ERROR(val, u32)) + return eeh_check_failure(addr, val); + return val; } -static inline u64 eeh_raw_readq(const volatile void __iomem *addr) + +static inline u64 eeh_readq_be(const volatile void __iomem *addr) { u64 val = in_be64(addr); if (EEH_POSSIBLE_ERROR(val, u64)) return eeh_check_failure(addr, val); return val; } -static inline void eeh_raw_writeq(u64 val, volatile void __iomem *addr) -{ - out_be64(addr, val); -} #define EEH_CHECK_ALIGN(v,a) \ ((((unsigned long)(v)) & ((a) - 1)) == 0) @@ -292,68 +267,29 @@ static inline void eeh_memcpy_toio(volatile void __iomem *dest, const void *src, #undef EEH_CHECK_ALIGN -static inline u8 eeh_inb(unsigned long port) -{ - u8 val; - val = in_8((u8 __iomem *)(port+pci_io_base)); - if (EEH_POSSIBLE_ERROR(val, u8)) - return eeh_check_failure((void __iomem *)(port), val); - return val; -} - -static inline void eeh_outb(u8 val, unsigned long port) -{ - out_8((u8 __iomem *)(port+pci_io_base), val); -} - -static inline u16 eeh_inw(unsigned long port) -{ - u16 val; - val = in_le16((u16 __iomem *)(port+pci_io_base)); - if (EEH_POSSIBLE_ERROR(val, u16)) - return eeh_check_failure((void __iomem *)(port), val); - return val; -} - -static inline void eeh_outw(u16 val, unsigned long port) -{ - out_le16((u16 __iomem *)(port+pci_io_base), val); -} - -static inline u32 eeh_inl(unsigned long port) -{ - u32 val; - val = in_le32((u32 __iomem *)(port+pci_io_base)); - if (EEH_POSSIBLE_ERROR(val, u32)) - return eeh_check_failure((void __iomem *)(port), val); - return val; -} - -static inline void eeh_outl(u32 val, unsigned long port) -{ - out_le32((u32 __iomem *)(port+pci_io_base), val); -} - /* in-string eeh macros */ -static inline void eeh_insb(unsigned long port, void * buf, int ns) +static inline void eeh_readsb(const volatile void __iomem *addr, void * buf, + int ns) { - _insb((u8 __iomem *)(port+pci_io_base), buf, ns); + _insb(addr, buf, ns); if (EEH_POSSIBLE_ERROR((*(((u8*)buf)+ns-1)), u8)) - eeh_check_failure((void __iomem *)(port), *(u8*)buf); + eeh_check_failure(addr, *(u8*)buf); } -static inline void eeh_insw_ns(unsigned long port, void * buf, int ns) +static inline void eeh_readsw(const volatile void __iomem *addr, void * buf, + int ns) { - _insw_ns((u16 __iomem *)(port+pci_io_base), buf, ns); + _insw(addr, buf, ns); if (EEH_POSSIBLE_ERROR((*(((u16*)buf)+ns-1)), u16)) - eeh_check_failure((void __iomem *)(port), *(u16*)buf); + eeh_check_failure(addr, *(u16*)buf); } -static inline void eeh_insl_ns(unsigned long port, void * buf, int nl) +static inline void eeh_readsl(const volatile void __iomem *addr, void * buf, + int nl) { - _insl_ns((u32 __iomem *)(port+pci_io_base), buf, nl); + _insl(addr, buf, nl); if (EEH_POSSIBLE_ERROR((*(((u32*)buf)+nl-1)), u32)) - eeh_check_failure((void __iomem *)(port), *(u32*)buf); + eeh_check_failure(addr, *(u32*)buf); } #endif /* __KERNEL__ */ diff --git a/include/asm-powerpc/ide.h b/include/asm-powerpc/ide.h index c8390f9485d..60a8fc42997 100644 --- a/include/asm-powerpc/ide.h +++ b/include/asm-powerpc/ide.h @@ -22,10 +22,17 @@ #endif #endif +#ifdef __powerpc64__ +#define __ide_mm_insw(p, a, c) readsw((void __iomem *)(p), (a), (c)) +#define __ide_mm_insl(p, a, c) readsl((void __iomem *)(p), (a), (c)) +#define __ide_mm_outsw(p, a, c) writesw((void __iomem *)(p), (a), (c)) +#define __ide_mm_outsl(p, a, c) writesl((void __iomem *)(p), (a), (c)) +#else #define __ide_mm_insw(p, a, c) _insw_ns((volatile u16 __iomem *)(p), (a), (c)) #define __ide_mm_insl(p, a, c) _insl_ns((volatile u32 __iomem *)(p), (a), (c)) #define __ide_mm_outsw(p, a, c) _outsw_ns((volatile u16 __iomem *)(p), (a), (c)) #define __ide_mm_outsl(p, a, c) _outsl_ns((volatile u32 __iomem *)(p), (a), (c)) +#endif #ifndef __powerpc64__ #include diff --git a/include/asm-powerpc/io-defs.h b/include/asm-powerpc/io-defs.h new file mode 100644 index 00000000000..5a660f1130d --- /dev/null +++ b/include/asm-powerpc/io-defs.h @@ -0,0 +1,56 @@ +/* This file is meant to be include multiple times by other headers */ + +DEF_PCI_AC_RET(readb, u8, (const PCI_IO_ADDR addr), (addr)) +DEF_PCI_AC_RET(readw, u16, (const PCI_IO_ADDR addr), (addr)) +DEF_PCI_AC_RET(readl, u32, (const PCI_IO_ADDR addr), (addr)) +DEF_PCI_AC_RET(readq, u64, (const PCI_IO_ADDR addr), (addr)) +DEF_PCI_AC_RET(readw_be, u16, (const PCI_IO_ADDR addr), (addr)) +DEF_PCI_AC_RET(readl_be, u32, (const PCI_IO_ADDR addr), (addr)) +DEF_PCI_AC_RET(readq_be, u64, (const PCI_IO_ADDR addr), (addr)) +DEF_PCI_AC_NORET(writeb, (u8 val, PCI_IO_ADDR addr), (val, addr)) +DEF_PCI_AC_NORET(writew, (u16 val, PCI_IO_ADDR addr), (val, addr)) +DEF_PCI_AC_NORET(writel, (u32 val, PCI_IO_ADDR addr), (val, addr)) +DEF_PCI_AC_NORET(writeq, (u64 val, PCI_IO_ADDR addr), (val, addr)) +DEF_PCI_AC_NORET(writew_be, (u16 val, PCI_IO_ADDR addr), (val, addr)) +DEF_PCI_AC_NORET(writel_be, (u32 val, PCI_IO_ADDR addr), (val, addr)) +DEF_PCI_AC_NORET(writeq_be, (u64 val, PCI_IO_ADDR addr), (val, addr)) + +DEF_PCI_AC_RET(inb, u8, (unsigned long port), (port)) +DEF_PCI_AC_RET(inw, u16, (unsigned long port), (port)) +DEF_PCI_AC_RET(inl, u32, (unsigned long port), (port)) +DEF_PCI_AC_NORET(outb, (u8 val, unsigned long port), (val, port)) +DEF_PCI_AC_NORET(outw, (u16 val, unsigned long port), (val, port)) +DEF_PCI_AC_NORET(outl, (u32 val, unsigned long port), (val, port)) + +DEF_PCI_AC_NORET(readsb, (const PCI_IO_ADDR a, void *b, unsigned long c), \ + (a, b, c)) +DEF_PCI_AC_NORET(readsw, (const PCI_IO_ADDR a, void *b, unsigned long c), \ + (a, b, c)) +DEF_PCI_AC_NORET(readsl, (const PCI_IO_ADDR a, void *b, unsigned long c), \ + (a, b, c)) +DEF_PCI_AC_NORET(writesb, (PCI_IO_ADDR a, const void *b, unsigned long c), \ + (a, b, c)) +DEF_PCI_AC_NORET(writesw, (PCI_IO_ADDR a, const void *b, unsigned long c), \ + (a, b, c)) +DEF_PCI_AC_NORET(writesl, (PCI_IO_ADDR a, const void *b, unsigned long c), \ + (a, b, c)) + +DEF_PCI_AC_NORET(insb, (unsigned long p, void *b, unsigned long c), \ + (p, b, c)) +DEF_PCI_AC_NORET(insw, (unsigned long p, void *b, unsigned long c), \ + (p, b, c)) +DEF_PCI_AC_NORET(insl, (unsigned long p, void *b, unsigned long c), \ + (p, b, c)) +DEF_PCI_AC_NORET(outsb, (unsigned long p, const void *b, unsigned long c), \ + (p, b, c)) +DEF_PCI_AC_NORET(outsw, (unsigned long p, const void *b, unsigned long c), \ + (p, b, c)) +DEF_PCI_AC_NORET(outsl, (unsigned long p, const void *b, unsigned long c), \ + (p, b, c)) + +DEF_PCI_AC_NORET(memset_io, (PCI_IO_ADDR a, int c, unsigned long n), \ + (a, c, n)) +DEF_PCI_AC_NORET(memcpy_fromio,(void *d,const PCI_IO_ADDR s,unsigned long n), \ + (d, s, n)) +DEF_PCI_AC_NORET(memcpy_toio,(PCI_IO_ADDR d,const void *s,unsigned long n), \ + (d, s, n)) diff --git a/include/asm-powerpc/io.h b/include/asm-powerpc/io.h index c2c5f14b5f5..03e843fc143 100644 --- a/include/asm-powerpc/io.h +++ b/include/asm-powerpc/io.h @@ -31,57 +31,122 @@ extern int check_legacy_ioport(unsigned long base_port); #define SLOW_DOWN_IO +/* + * + * Low level MMIO accessors + * + * This provides the non-bus specific accessors to MMIO. Those are PowerPC + * specific and thus shouldn't be used in generic code. The accessors + * provided here are: + * + * in_8, in_le16, in_be16, in_le32, in_be32, in_le64, in_be64 + * out_8, out_le16, out_be16, out_le32, out_be32, out_le64, out_be64 + * _insb, _insw_ns, _insl_ns, _outsb, _outsw_ns, _outsl_ns + * + * Those operate directly on a kernel virtual address. Note that the prototype + * for the out_* accessors has the arguments in opposite order from the usual + * linux PCI accessors. Unlike those, they take the address first and the value + * next. + * + * Note: I might drop the _ns suffix on the stream operations soon as it is + * simply normal for stream operations to not swap in the first place. + * + */ + +#define IO_SET_SYNC_FLAG() do { get_paca()->io_sync = 1; } while(0) + +#define DEF_MMIO_IN(name, type, insn) \ +static inline type name(const volatile type __iomem *addr) \ +{ \ + type ret; \ + __asm__ __volatile__("sync;" insn ";twi 0,%0,0;isync" \ + : "=r" (ret) : "r" (addr), "m" (*addr)); \ + return ret; \ +} + +#define DEF_MMIO_OUT(name, type, insn) \ +static inline void name(volatile type __iomem *addr, type val) \ +{ \ + __asm__ __volatile__("sync;" insn \ + : "=m" (*addr) : "r" (val), "r" (addr)); \ + IO_SET_SYNC_FLAG(); \ +} + + +#define DEF_MMIO_IN_BE(name, size, insn) \ + DEF_MMIO_IN(name, u##size, __stringify(insn)"%U2%X2 %0,%2") +#define DEF_MMIO_IN_LE(name, size, insn) \ + DEF_MMIO_IN(name, u##size, __stringify(insn)" %0,0,%1") + +#define DEF_MMIO_OUT_BE(name, size, insn) \ + DEF_MMIO_OUT(name, u##size, __stringify(insn)"%U0%X0 %1,%0") +#define DEF_MMIO_OUT_LE(name, size, insn) \ + DEF_MMIO_OUT(name, u##size, __stringify(insn)" %1,0,%2") + +DEF_MMIO_IN_BE(in_8, 8, lbz); +DEF_MMIO_IN_BE(in_be16, 16, lhz); +DEF_MMIO_IN_BE(in_be32, 32, lwz); +DEF_MMIO_IN_BE(in_be64, 64, ld); +DEF_MMIO_IN_LE(in_le16, 16, lhbrx); +DEF_MMIO_IN_LE(in_le32, 32, lwbrx); + +DEF_MMIO_OUT_BE(out_8, 8, stb); +DEF_MMIO_OUT_BE(out_be16, 16, sth); +DEF_MMIO_OUT_BE(out_be32, 32, stw); +DEF_MMIO_OUT_BE(out_be64, 64, std); +DEF_MMIO_OUT_LE(out_le16, 16, sthbrx); +DEF_MMIO_OUT_LE(out_le32, 32, stwbrx); + +/* There is no asm instructions for 64 bits reverse loads and stores */ +static inline u64 in_le64(const volatile u64 __iomem *addr) +{ + return le64_to_cpu(in_be64(addr)); +} + +static inline void out_le64(volatile u64 __iomem *addr, u64 val) +{ + out_be64(addr, cpu_to_le64(val)); +} + +/* + * Low level IO stream instructions are defined out of line for now + */ +extern void _insb(const volatile u8 __iomem *addr, void *buf, long count); +extern void _outsb(volatile u8 __iomem *addr,const void *buf,long count); +extern void _insw_ns(const volatile u16 __iomem *addr, void *buf, long count); +extern void _outsw_ns(volatile u16 __iomem *addr, const void *buf, long count); +extern void _insl_ns(const volatile u32 __iomem *addr, void *buf, long count); +extern void _outsl_ns(volatile u32 __iomem *addr, const void *buf, long count); + +/* The _ns naming is historical and will be removed. For now, just #define + * the non _ns equivalent names + */ +#define _insw _insw_ns +#define _insl _insl_ns +#define _outsw _outsw_ns +#define _outsl _outsl_ns + +/* + * + * PCI and standard ISA accessors + * + * Those are globally defined linux accessors for devices on PCI or ISA + * busses. They follow the Linux defined semantics. The current implementation + * for PowerPC is as close as possible to the x86 version of these, and thus + * provides fairly heavy weight barriers for the non-raw versions + * + * In addition, they support a hook mechanism when CONFIG_PPC_INDIRECT_IO + * allowing the platform to provide its own implementation of some or all + * of the accessors. + */ + extern unsigned long isa_io_base; extern unsigned long pci_io_base; -#ifdef CONFIG_PPC_ISERIES - -extern int in_8(const volatile unsigned char __iomem *addr); -extern void out_8(volatile unsigned char __iomem *addr, int val); -extern int in_le16(const volatile unsigned short __iomem *addr); -extern int in_be16(const volatile unsigned short __iomem *addr); -extern void out_le16(volatile unsigned short __iomem *addr, int val); -extern void out_be16(volatile unsigned short __iomem *addr, int val); -extern unsigned in_le32(const volatile unsigned __iomem *addr); -extern unsigned in_be32(const volatile unsigned __iomem *addr); -extern void out_le32(volatile unsigned __iomem *addr, int val); -extern void out_be32(volatile unsigned __iomem *addr, int val); -extern unsigned long in_le64(const volatile unsigned long __iomem *addr); -extern unsigned long in_be64(const volatile unsigned long __iomem *addr); -extern void out_le64(volatile unsigned long __iomem *addr, unsigned long val); -extern void out_be64(volatile unsigned long __iomem *addr, unsigned long val); - -extern unsigned char __raw_readb(const volatile void __iomem *addr); -extern unsigned short __raw_readw(const volatile void __iomem *addr); -extern unsigned int __raw_readl(const volatile void __iomem *addr); -extern unsigned long __raw_readq(const volatile void __iomem *addr); -extern void __raw_writeb(unsigned char v, volatile void __iomem *addr); -extern void __raw_writew(unsigned short v, volatile void __iomem *addr); -extern void __raw_writel(unsigned int v, volatile void __iomem *addr); -extern void __raw_writeq(unsigned long v, volatile void __iomem *addr); - -extern void memset_io(volatile void __iomem *addr, int c, unsigned long n); -extern void memcpy_fromio(void *dest, const volatile void __iomem *src, - unsigned long n); -extern void memcpy_toio(volatile void __iomem *dest, const void *src, - unsigned long n); - -#else /* CONFIG_PPC_ISERIES */ - -#define in_8(addr) __in_8((addr)) -#define out_8(addr, val) __out_8((addr), (val)) -#define in_le16(addr) __in_le16((addr)) -#define in_be16(addr) __in_be16((addr)) -#define out_le16(addr, val) __out_le16((addr), (val)) -#define out_be16(addr, val) __out_be16((addr), (val)) -#define in_le32(addr) __in_le32((addr)) -#define in_be32(addr) __in_be32((addr)) -#define out_le32(addr, val) __out_le32((addr), (val)) -#define out_be32(addr, val) __out_be32((addr), (val)) -#define in_le64(addr) __in_le64((addr)) -#define in_be64(addr) __in_be64((addr)) -#define out_le64(addr, val) __out_le64((addr), (val)) -#define out_be64(addr, val) __out_be64((addr), (val)) + +/* + * Non ordered and non-swapping "raw" accessors + */ static inline unsigned char __raw_readb(const volatile void __iomem *addr) { @@ -115,52 +180,203 @@ static inline void __raw_writeq(unsigned long v, volatile void __iomem *addr) { *(volatile unsigned long __force *)addr = v; } -#define memset_io(a,b,c) eeh_memset_io((a),(b),(c)) -#define memcpy_fromio(a,b,c) eeh_memcpy_fromio((a),(b),(c)) -#define memcpy_toio(a,b,c) eeh_memcpy_toio((a),(b),(c)) -#endif /* CONFIG_PPC_ISERIES */ /* - * The insw/outsw/insl/outsl macros don't do byte-swapping. - * They are only used in practice for transferring buffers which - * are arrays of bytes, and byte-swapping is not appropriate in - * that case. - paulus */ -#define insb(port, buf, ns) eeh_insb((port), (buf), (ns)) -#define insw(port, buf, ns) eeh_insw_ns((port), (buf), (ns)) -#define insl(port, buf, nl) eeh_insl_ns((port), (buf), (nl)) - -#define outsb(port, buf, ns) _outsb((u8 __iomem *)((port)+pci_io_base), (buf), (ns)) -#define outsw(port, buf, ns) _outsw_ns((u16 __iomem *)((port)+pci_io_base), (buf), (ns)) -#define outsl(port, buf, nl) _outsl_ns((u32 __iomem *)((port)+pci_io_base), (buf), (nl)) - -#define readb(addr) eeh_readb(addr) -#define readw(addr) eeh_readw(addr) -#define readl(addr) eeh_readl(addr) -#define readq(addr) eeh_readq(addr) -#define writeb(data, addr) eeh_writeb((data), (addr)) -#define writew(data, addr) eeh_writew((data), (addr)) -#define writel(data, addr) eeh_writel((data), (addr)) -#define writeq(data, addr) eeh_writeq((data), (addr)) -#define inb(port) eeh_inb((unsigned long)port) -#define outb(val, port) eeh_outb(val, (unsigned long)port) -#define inw(port) eeh_inw((unsigned long)port) -#define outw(val, port) eeh_outw(val, (unsigned long)port) -#define inl(port) eeh_inl((unsigned long)port) -#define outl(val, port) eeh_outl(val, (unsigned long)port) + * + * PCI PIO and MMIO accessors. + * + */ + +#include + +/* Shortcut to the MMIO argument pointer */ +#define PCI_IO_ADDR volatile void __iomem * + +/* Indirect IO address tokens: + * + * When CONFIG_PPC_INDIRECT_IO is set, the platform can provide hooks + * on all IOs. + * + * To help platforms who may need to differenciate MMIO addresses in + * their hooks, a bitfield is reserved for use by the platform near the + * top of MMIO addresses (not PIO, those have to cope the hard way). + * + * This bit field is 12 bits and is at the top of the IO virtual + * addresses PCI_IO_INDIRECT_TOKEN_MASK. + * + * The kernel virtual space is thus: + * + * 0xD000000000000000 : vmalloc + * 0xD000080000000000 : PCI PHB IO space + * 0xD000080080000000 : ioremap + * 0xD0000fffffffffff : end of ioremap region + * + * Since the top 4 bits are reserved as the region ID, we use thus + * the next 12 bits and keep 4 bits available for the future if the + * virtual address space is ever to be extended. + * + * The direct IO mapping operations will then mask off those bits + * before doing the actual access, though that only happen when + * CONFIG_PPC_INDIRECT_IO is set, thus be careful when you use that + * mechanism + */ + +#ifdef CONFIG_PPC_INDIRECT_IO +#define PCI_IO_IND_TOKEN_MASK 0x0fff000000000000ul +#define PCI_IO_IND_TOKEN_SHIFT 48 +#define PCI_FIX_ADDR(addr) \ + ((PCI_IO_ADDR)(((unsigned long)(addr)) & ~PCI_IO_IND_TOKEN_MASK)) +#define PCI_GET_ADDR_TOKEN(addr) \ + (((unsigned long)(addr) & PCI_IO_IND_TOKEN_MASK) >> \ + PCI_IO_IND_TOKEN_SHIFT) +#define PCI_SET_ADDR_TOKEN(addr, token) \ +do { \ + unsigned long __a = (unsigned long)(addr); \ + __a &= ~PCI_IO_IND_TOKEN_MASK; \ + __a |= ((unsigned long)(token)) << PCI_IO_IND_TOKEN_SHIFT; \ + (addr) = (void __iomem *)__a; \ +} while(0) +#else +#define PCI_FIX_ADDR(addr) (addr) +#endif + +/* The "__do_*" operations below provide the actual "base" implementation + * for each of the defined acccessor. Some of them use the out_* functions + * directly, some of them still use EEH, though we might change that in the + * future. Those macros below provide the necessary argument swapping and + * handling of the IO base for PIO. + * + * They are themselves used by the macros that define the actual accessors + * and can be used by the hooks if any. + * + * Note that PIO operations are always defined in terms of their corresonding + * MMIO operations. That allows platforms like iSeries who want to modify the + * behaviour of both to only hook on the MMIO version and get both. It's also + * possible to hook directly at the toplevel PIO operation if they have to + * be handled differently + */ +#define __do_writeb(val, addr) out_8(PCI_FIX_ADDR(addr), val) +#define __do_writew(val, addr) out_le16(PCI_FIX_ADDR(addr), val) +#define __do_writel(val, addr) out_le32(PCI_FIX_ADDR(addr), val) +#define __do_writeq(val, addr) out_le64(PCI_FIX_ADDR(addr), val) +#define __do_writew_be(val, addr) out_be16(PCI_FIX_ADDR(addr), val) +#define __do_writel_be(val, addr) out_be32(PCI_FIX_ADDR(addr), val) +#define __do_writeq_be(val, addr) out_be64(PCI_FIX_ADDR(addr), val) +#define __do_readb(addr) eeh_readb(PCI_FIX_ADDR(addr)) +#define __do_readw(addr) eeh_readw(PCI_FIX_ADDR(addr)) +#define __do_readl(addr) eeh_readl(PCI_FIX_ADDR(addr)) +#define __do_readq(addr) eeh_readq(PCI_FIX_ADDR(addr)) +#define __do_readw_be(addr) eeh_readw_be(PCI_FIX_ADDR(addr)) +#define __do_readl_be(addr) eeh_readl_be(PCI_FIX_ADDR(addr)) +#define __do_readq_be(addr) eeh_readq_be(PCI_FIX_ADDR(addr)) + +#define __do_outb(val, port) writeb(val,(PCI_IO_ADDR)pci_io_base+port); +#define __do_outw(val, port) writew(val,(PCI_IO_ADDR)pci_io_base+port); +#define __do_outl(val, port) writel(val,(PCI_IO_ADDR)pci_io_base+port); +#define __do_inb(port) readb((PCI_IO_ADDR)pci_io_base + port); +#define __do_inw(port) readw((PCI_IO_ADDR)pci_io_base + port); +#define __do_inl(port) readl((PCI_IO_ADDR)pci_io_base + port); + +#define __do_readsb(a, b, n) eeh_readsb(PCI_FIX_ADDR(a), (b), (n)) +#define __do_readsw(a, b, n) eeh_readsw(PCI_FIX_ADDR(a), (b), (n)) +#define __do_readsl(a, b, n) eeh_readsl(PCI_FIX_ADDR(a), (b), (n)) +#define __do_writesb(a, b, n) _outsb(PCI_FIX_ADDR(a),(b),(n)) +#define __do_writesw(a, b, n) _outsw(PCI_FIX_ADDR(a),(b),(n)) +#define __do_writesl(a, b, n) _outsl(PCI_FIX_ADDR(a),(b),(n)) + +#define __do_insb(p, b, n) readsb((PCI_IO_ADDR)pci_io_base+(p), (b), (n)) +#define __do_insw(p, b, n) readsw((PCI_IO_ADDR)pci_io_base+(p), (b), (n)) +#define __do_insl(p, b, n) readsl((PCI_IO_ADDR)pci_io_base+(p), (b), (n)) +#define __do_outsb(p, b, n) writesb((PCI_IO_ADDR)pci_io_base+(p),(b),(n)) +#define __do_outsw(p, b, n) writesw((PCI_IO_ADDR)pci_io_base+(p),(b),(n)) +#define __do_outsl(p, b, n) writesl((PCI_IO_ADDR)pci_io_base+(p),(b),(n)) + +#define __do_memset_io(addr, c, n) eeh_memset_io(PCI_FIX_ADDR(addr), c, n) +#define __do_memcpy_fromio(dst, src, n) eeh_memcpy_fromio(dst, \ + PCI_FIX_ADDR(src), n) +#define __do_memcpy_toio(dst, src, n) eeh_memcpy_toio(PCI_FIX_ADDR(dst), \ + src, n) + +#ifdef CONFIG_PPC_INDIRECT_IO +#define DEF_PCI_HOOK(x) x +#else +#define DEF_PCI_HOOK(x) NULL +#endif + +/* Structure containing all the hooks */ +extern struct ppc_pci_io { + +#define DEF_PCI_AC_RET(name, ret, at, al) ret (*name) at; +#define DEF_PCI_AC_NORET(name, at, al) void (*name) at; + +#include + +#undef DEF_PCI_AC_RET +#undef DEF_PCI_AC_NORET + +} ppc_pci_io; + +/* The inline wrappers */ +#define DEF_PCI_AC_RET(name, ret, at, al) \ +static inline ret name at \ +{ \ + if (DEF_PCI_HOOK(ppc_pci_io.name) != NULL) \ + return ppc_pci_io.name al; \ + return __do_##name al; \ +} + +#define DEF_PCI_AC_NORET(name, at, al) \ +static inline void name at \ +{ \ + if (DEF_PCI_HOOK(ppc_pci_io.name) != NULL) \ + ppc_pci_io.name al; \ + else \ + __do_##name al; \ +} + +#include + +#undef DEF_PCI_AC_RET +#undef DEF_PCI_AC_NORET + +/* Some drivers check for the presence of readq & writeq with + * a #ifdef, so we make them happy here. + */ +#define readq readq +#define writeq writeq + +/* Nothing to do for cache stuff x*/ + +#define dma_cache_inv(_start,_size) do { } while (0) +#define dma_cache_wback(_start,_size) do { } while (0) +#define dma_cache_wback_inv(_start,_size) do { } while (0) + + +/* + * Convert a physical pointer to a virtual kernel pointer for /dev/mem + * access + */ +#define xlate_dev_mem_ptr(p) __va(p) + +/* + * Convert a virtual cached pointer to an uncached pointer + */ +#define xlate_dev_kmem_ptr(p) p +/* + * We don't do relaxed operations yet, at least not with this semantic + */ #define readb_relaxed(addr) readb(addr) #define readw_relaxed(addr) readw(addr) #define readl_relaxed(addr) readl(addr) #define readq_relaxed(addr) readq(addr) -extern void _insb(volatile u8 __iomem *port, void *buf, long count); -extern void _outsb(volatile u8 __iomem *port, const void *buf, long count); -extern void _insw_ns(volatile u16 __iomem *port, void *buf, long count); -extern void _outsw_ns(volatile u16 __iomem *port, const void *buf, long count); -extern void _insl_ns(volatile u32 __iomem *port, void *buf, long count); -extern void _outsl_ns(volatile u32 __iomem *port, const void *buf, long count); - +/* + * Enforce synchronisation of stores vs. spin_unlock + * (this does it explicitely, though our implementation of spin_unlock + * does it implicitely too) + */ static inline void mmiowb(void) { unsigned long tmp; @@ -170,6 +386,23 @@ static inline void mmiowb(void) : "memory"); } +static inline void iosync(void) +{ + __asm__ __volatile__ ("sync" : : : "memory"); +} + +/* Enforce in-order execution of data I/O. + * No distinction between read/write on PPC; use eieio for all three. + * Those are fairly week though. They don't provide a barrier between + * MMIO and cacheable storage nor do they provide a barrier vs. locks, + * they only provide barriers between 2 __raw MMIO operations and + * possibly break write combining. + */ +#define iobarrier_rw() eieio() +#define iobarrier_r() eieio() +#define iobarrier_w() eieio() + + /* * output pause versions need a delay at least for the * w83c105 ide controller in a p610. @@ -185,11 +418,6 @@ static inline void mmiowb(void) #define IO_SPACE_LIMIT ~(0UL) -extern int __ioremap_explicit(unsigned long p_addr, unsigned long v_addr, - unsigned long size, unsigned long flags); -extern void __iomem *__ioremap(unsigned long address, unsigned long size, - unsigned long flags); - /** * ioremap - map bus memory into CPU space * @address: bus address of the memory @@ -200,14 +428,70 @@ extern void __iomem *__ioremap(unsigned long address, unsigned long size, * writew/writel functions and the other mmio helpers. The returned * address is not guaranteed to be usable directly as a virtual * address. + * + * We provide a few variations of it: + * + * * ioremap is the standard one and provides non-cacheable guarded mappings + * and can be hooked by the platform via ppc_md + * + * * ioremap_flags allows to specify the page flags as an argument and can + * also be hooked by the platform via ppc_md + * + * * ioremap_nocache is identical to ioremap + * + * * iounmap undoes such a mapping and can be hooked + * + * * __ioremap_explicit (and the pending __iounmap_explicit) are low level + * functions to create hand-made mappings for use only by the PCI code + * and cannot currently be hooked. + * + * * __ioremap is the low level implementation used by ioremap and + * ioremap_flags and cannot be hooked (but can be used by a hook on one + * of the previous ones) + * + * * __iounmap, is the low level implementation used by iounmap and cannot + * be hooked (but can be used by a hook on iounmap) + * */ extern void __iomem *ioremap(unsigned long address, unsigned long size); - +extern void __iomem *ioremap_flags(unsigned long address, unsigned long size, + unsigned long flags); #define ioremap_nocache(addr, size) ioremap((addr), (size)) -extern int iounmap_explicit(volatile void __iomem *addr, unsigned long size); -extern void iounmap(volatile void __iomem *addr); +extern void iounmap(void __iomem *addr); + +extern void __iomem *__ioremap(unsigned long address, unsigned long size, + unsigned long flags); +extern void __iounmap(void __iomem *addr); + +extern int __ioremap_explicit(unsigned long p_addr, unsigned long v_addr, + unsigned long size, unsigned long flags); +extern int __iounmap_explicit(void __iomem *start, unsigned long size); + extern void __iomem * reserve_phb_iospace(unsigned long size); + +/* + * When CONFIG_PPC_INDIRECT_IO is set, we use the generic iomap implementation + * which needs some additional definitions here. They basically allow PIO + * space overall to be 1GB. This will work as long as we never try to use + * iomap to map MMIO below 1GB which should be fine on ppc64 + */ +#define HAVE_ARCH_PIO_SIZE 1 +#define PIO_OFFSET 0x00000000UL +#define PIO_MASK 0x3fffffffUL +#define PIO_RESERVED 0x40000000UL + +#define mmio_read16be(addr) readw_be(addr) +#define mmio_read32be(addr) readl_be(addr) +#define mmio_write16be(val, addr) writew_be(val, addr) +#define mmio_write32be(val, addr) writel_be(val, addr) +#define mmio_insb(addr, dst, count) readsb(addr, dst, count) +#define mmio_insw(addr, dst, count) readsw(addr, dst, count) +#define mmio_insl(addr, dst, count) readsl(addr, dst, count) +#define mmio_outsb(addr, src, count) writesb(addr, src, count) +#define mmio_outsw(addr, src, count) writesw(addr, src, count) +#define mmio_outsl(addr, src, count) writesl(addr, src, count) + /** * virt_to_phys - map virtual addresses to physical * @address: address to remap @@ -254,177 +538,6 @@ static inline void * phys_to_virt(unsigned long address) */ #define BIO_VMERGE_BOUNDARY 0 -static inline void iosync(void) -{ - __asm__ __volatile__ ("sync" : : : "memory"); -} - -/* Enforce in-order execution of data I/O. - * No distinction between read/write on PPC; use eieio for all three. - */ -#define iobarrier_rw() eieio() -#define iobarrier_r() eieio() -#define iobarrier_w() eieio() - -/* - * 8, 16 and 32 bit, big and little endian I/O operations, with barrier. - * These routines do not perform EEH-related I/O address translation, - * and should not be used directly by device drivers. Use inb/readb - * instead. - */ -static inline int __in_8(const volatile unsigned char __iomem *addr) -{ - int ret; - - __asm__ __volatile__("sync; lbz%U1%X1 %0,%1; twi 0,%0,0; isync" - : "=r" (ret) : "m" (*addr)); - return ret; -} - -static inline void __out_8(volatile unsigned char __iomem *addr, int val) -{ - __asm__ __volatile__("sync; stb%U0%X0 %1,%0" - : "=m" (*addr) : "r" (val)); - get_paca()->io_sync = 1; -} - -static inline int __in_le16(const volatile unsigned short __iomem *addr) -{ - int ret; - - __asm__ __volatile__("sync; lhbrx %0,0,%1; twi 0,%0,0; isync" - : "=r" (ret) : "r" (addr), "m" (*addr)); - return ret; -} - -static inline int __in_be16(const volatile unsigned short __iomem *addr) -{ - int ret; - - __asm__ __volatile__("sync; lhz%U1%X1 %0,%1; twi 0,%0,0; isync" - : "=r" (ret) : "m" (*addr)); - return ret; -} - -static inline void __out_le16(volatile unsigned short __iomem *addr, int val) -{ - __asm__ __volatile__("sync; sthbrx %1,0,%2" - : "=m" (*addr) : "r" (val), "r" (addr)); - get_paca()->io_sync = 1; -} - -static inline void __out_be16(volatile unsigned short __iomem *addr, int val) -{ - __asm__ __volatile__("sync; sth%U0%X0 %1,%0" - : "=m" (*addr) : "r" (val)); - get_paca()->io_sync = 1; -} - -static inline unsigned __in_le32(const volatile unsigned __iomem *addr) -{ - unsigned ret; - - __asm__ __volatile__("sync; lwbrx %0,0,%1; twi 0,%0,0; isync" - : "=r" (ret) : "r" (addr), "m" (*addr)); - return ret; -} - -static inline unsigned __in_be32(const volatile unsigned __iomem *addr) -{ - unsigned ret; - - __asm__ __volatile__("sync; lwz%U1%X1 %0,%1; twi 0,%0,0; isync" - : "=r" (ret) : "m" (*addr)); - return ret; -} - -static inline void __out_le32(volatile unsigned __iomem *addr, int val) -{ - __asm__ __volatile__("sync; stwbrx %1,0,%2" : "=m" (*addr) - : "r" (val), "r" (addr)); - get_paca()->io_sync = 1; -} - -static inline void __out_be32(volatile unsigned __iomem *addr, int val) -{ - __asm__ __volatile__("sync; stw%U0%X0 %1,%0" - : "=m" (*addr) : "r" (val)); - get_paca()->io_sync = 1; -} - -static inline unsigned long __in_le64(const volatile unsigned long __iomem *addr) -{ - unsigned long tmp, ret; - - __asm__ __volatile__( - "sync\n" - "ld %1,0(%2)\n" - "twi 0,%1,0\n" - "isync\n" - "rldimi %0,%1,5*8,1*8\n" - "rldimi %0,%1,3*8,2*8\n" - "rldimi %0,%1,1*8,3*8\n" - "rldimi %0,%1,7*8,4*8\n" - "rldicl %1,%1,32,0\n" - "rlwimi %0,%1,8,8,31\n" - "rlwimi %0,%1,24,16,23\n" - : "=r" (ret) , "=r" (tmp) : "b" (addr) , "m" (*addr)); - return ret; -} - -static inline unsigned long __in_be64(const volatile unsigned long __iomem *addr) -{ - unsigned long ret; - - __asm__ __volatile__("sync; ld%U1%X1 %0,%1; twi 0,%0,0; isync" - : "=r" (ret) : "m" (*addr)); - return ret; -} - -static inline void __out_le64(volatile unsigned long __iomem *addr, unsigned long val) -{ - unsigned long tmp; - - __asm__ __volatile__( - "rldimi %0,%1,5*8,1*8\n" - "rldimi %0,%1,3*8,2*8\n" - "rldimi %0,%1,1*8,3*8\n" - "rldimi %0,%1,7*8,4*8\n" - "rldicl %1,%1,32,0\n" - "rlwimi %0,%1,8,8,31\n" - "rlwimi %0,%1,24,16,23\n" - "sync\n" - "std %0,0(%3)" - : "=&r" (tmp) , "=&r" (val) : "1" (val) , "b" (addr) , "m" (*addr)); - get_paca()->io_sync = 1; -} - -static inline void __out_be64(volatile unsigned long __iomem *addr, unsigned long val) -{ - __asm__ __volatile__("sync; std%U0%X0 %1,%0" : "=m" (*addr) : "r" (val)); - get_paca()->io_sync = 1; -} - -#include - -/* Nothing to do */ - -#define dma_cache_inv(_start,_size) do { } while (0) -#define dma_cache_wback(_start,_size) do { } while (0) -#define dma_cache_wback_inv(_start,_size) do { } while (0) - - -/* - * Convert a physical pointer to a virtual kernel pointer for /dev/mem - * access - */ -#define xlate_dev_mem_ptr(p) __va(p) - -/* - * Convert a virtual cached pointer to an uncached pointer - */ -#define xlate_dev_kmem_ptr(p) p - #endif /* __KERNEL__ */ #endif /* CONFIG_PPC64 */ diff --git a/include/asm-powerpc/machdep.h b/include/asm-powerpc/machdep.h index 23580cf5504..8c1a2dfe5cc 100644 --- a/include/asm-powerpc/machdep.h +++ b/include/asm-powerpc/machdep.h @@ -87,6 +87,10 @@ struct machdep_calls { void (*tce_flush)(struct iommu_table *tbl); void (*pci_dma_dev_setup)(struct pci_dev *dev); void (*pci_dma_bus_setup)(struct pci_bus *bus); + + void __iomem * (*ioremap)(unsigned long addr, unsigned long size, + unsigned long flags); + void (*iounmap)(void __iomem *token); #endif /* CONFIG_PPC64 */ int (*probe)(void); diff --git a/include/asm-ppc/io.h b/include/asm-ppc/io.h index b744baf9e20..bfb639f9e42 100644 --- a/include/asm-ppc/io.h +++ b/include/asm-ppc/io.h @@ -321,12 +321,12 @@ __do_out_asm(outl, "stwbrx") #define inl_p(port) inl((port)) #define outl_p(val, port) outl((val), (port)) -extern void _insb(volatile u8 __iomem *port, void *buf, long count); -extern void _outsb(volatile u8 __iomem *port, const void *buf, long count); -extern void _insw_ns(volatile u16 __iomem *port, void *buf, long count); -extern void _outsw_ns(volatile u16 __iomem *port, const void *buf, long count); -extern void _insl_ns(volatile u32 __iomem *port, void *buf, long count); -extern void _outsl_ns(volatile u32 __iomem *port, const void *buf, long count); +extern void _insb(const volatile u8 __iomem *addr, void *buf, long count); +extern void _outsb(volatile u8 __iomem *addr,const void *buf,long count); +extern void _insw_ns(const volatile u16 __iomem *addr, void *buf, long count); +extern void _outsw_ns(volatile u16 __iomem *addr, const void *buf, long count); +extern void _insl_ns(const volatile u32 __iomem *addr, void *buf, long count); +extern void _outsl_ns(volatile u32 __iomem *addr, const void *buf, long count); #define IO_SPACE_LIMIT ~0 -- cgit v1.2.3-70-g09d2 From 014da7ff47b559e5f0ae3e044b73f0359c08153d Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Sat, 11 Nov 2006 17:25:12 +1100 Subject: [POWERPC] Cell "Spider" MMIO workarounds This patch implements a workaround for a Spider PCI host bridge bug where it doesn't enforce some of the PCI ordering rules unless some manual manipulation of a special register is done. In order to be fully compliant with the PCI spec, I do this on every MMIO read operation. Signed-off-by: Benjamin Herrenschmidt Signed-off-by: Paul Mackerras --- arch/powerpc/Kconfig | 1 + arch/powerpc/platforms/cell/Makefile | 4 +- arch/powerpc/platforms/cell/io-workarounds.c | 346 +++++++++++++++++++++++++++ 3 files changed, 349 insertions(+), 2 deletions(-) create mode 100644 arch/powerpc/platforms/cell/io-workarounds.c (limited to 'arch/powerpc') diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index 3e89d9d3493..9547aacc319 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -476,6 +476,7 @@ config PPC_CELL_NATIVE select PPC_CELL select PPC_DCR_MMIO select PPC_OF_PLATFORM_PCI + select PPC_INDIRECT_IO select MPIC default n diff --git a/arch/powerpc/platforms/cell/Makefile b/arch/powerpc/platforms/cell/Makefile index 0f31db7a50a..62c011e8092 100644 --- a/arch/powerpc/platforms/cell/Makefile +++ b/arch/powerpc/platforms/cell/Makefile @@ -1,6 +1,6 @@ obj-$(CONFIG_PPC_CELL_NATIVE) += interrupt.o iommu.o setup.o \ - cbe_regs.o spider-pic.o pervasive.o \ - pmu.o + cbe_regs.o spider-pic.o \ + pervasive.o pmu.o io-workarounds.o obj-$(CONFIG_CBE_RAS) += ras.o obj-$(CONFIG_CBE_THERM) += cbe_thermal.o diff --git a/arch/powerpc/platforms/cell/io-workarounds.c b/arch/powerpc/platforms/cell/io-workarounds.c new file mode 100644 index 00000000000..580d4259591 --- /dev/null +++ b/arch/powerpc/platforms/cell/io-workarounds.c @@ -0,0 +1,346 @@ +/* + * Copyright (C) 2006 Benjamin Herrenschmidt + * IBM, Corp. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#undef DEBUG + +#include +#include +#include +#include +#include +#include +#include + + +#define SPIDER_PCI_REG_BASE 0xd000 +#define SPIDER_PCI_VCI_CNTL_STAT 0x0110 +#define SPIDER_PCI_DUMMY_READ 0x0810 +#define SPIDER_PCI_DUMMY_READ_BASE 0x0814 + +/* Undefine that to re-enable bogus prefetch + * + * Without that workaround, the chip will do bogus prefetch past + * page boundary from system memory. This setting will disable that, + * though the documentation is unclear as to the consequences of doing + * so, either purely performances, or possible misbehaviour... It's not + * clear wether the chip can handle unaligned accesses at all without + * prefetching enabled. + * + * For now, things appear to be behaving properly with that prefetching + * disabled and IDE, possibly because IDE isn't doing any unaligned + * access. + */ +#define SPIDER_DISABLE_PREFETCH + +#define MAX_SPIDERS 2 + +static struct spider_pci_bus { + void __iomem *regs; + unsigned long mmio_start; + unsigned long mmio_end; + unsigned long pio_vstart; + unsigned long pio_vend; +} spider_pci_busses[MAX_SPIDERS]; +static int spider_pci_count; + +static struct spider_pci_bus *spider_pci_find(unsigned long vaddr, + unsigned long paddr) +{ + int i; + + for (i = 0; i < spider_pci_count; i++) { + struct spider_pci_bus *bus = &spider_pci_busses[i]; + if (paddr && paddr >= bus->mmio_start && paddr < bus->mmio_end) + return bus; + if (vaddr && vaddr >= bus->pio_vstart && vaddr < bus->pio_vend) + return bus; + } + return NULL; +} + +static void spider_io_flush(const volatile void __iomem *addr) +{ + struct spider_pci_bus *bus; + int token; + + /* Get platform token (set by ioremap) from address */ + token = PCI_GET_ADDR_TOKEN(addr); + + /* Fast path if we have a non-0 token, it indicates which bus we + * are on. + * + * If the token is 0, that means either the the ioremap was done + * before we initialized this layer, or it's a PIO operation. We + * fallback to a low path in this case. Hopefully, internal devices + * which are ioremap'ed early should use in_XX/out_XX functions + * instead of the PCI ones and thus not suffer from the slowdown. + * + * Also note that currently, the workaround will not work for areas + * that are not mapped with PTEs (bolted in the hash table). This + * is the case for ioremaps done very early at boot (before + * mem_init_done) and includes the mapping of the ISA IO space. + * + * Fortunately, none of the affected devices is expected to do DMA + * and thus there should be no problem in practice. + * + * In order to improve performances, we only do the PTE search for + * addresses falling in the PHB IO space area. That means it will + * not work for hotplug'ed PHBs but those don't exist with Spider. + */ + if (token && token <= spider_pci_count) + bus = &spider_pci_busses[token - 1]; + else { + unsigned long vaddr, paddr; + pte_t *ptep; + + /* Fixup physical address */ + vaddr = (unsigned long)PCI_FIX_ADDR(addr); + + /* Check if it's in allowed range for PIO */ + if (vaddr < PHBS_IO_BASE || vaddr >= IMALLOC_BASE) + return; + + /* Try to find a PTE. If not, clear the paddr, we'll do + * a vaddr only lookup (PIO only) + */ + ptep = find_linux_pte(init_mm.pgd, vaddr); + if (ptep == NULL) + paddr = 0; + else + paddr = pte_pfn(*ptep) << PAGE_SHIFT; + + bus = spider_pci_find(vaddr, paddr); + if (bus == NULL) + return; + } + + /* Now do the workaround + */ + (void)in_be32(bus->regs + SPIDER_PCI_DUMMY_READ); +} + +static u8 spider_readb(const volatile void __iomem *addr) +{ + u8 val = __do_readb(addr); + spider_io_flush(addr); + return val; +} + +static u16 spider_readw(const volatile void __iomem *addr) +{ + u16 val = __do_readw(addr); + spider_io_flush(addr); + return val; +} + +static u32 spider_readl(const volatile void __iomem *addr) +{ + u32 val = __do_readl(addr); + spider_io_flush(addr); + return val; +} + +static u64 spider_readq(const volatile void __iomem *addr) +{ + u64 val = __do_readq(addr); + spider_io_flush(addr); + return val; +} + +static u16 spider_readw_be(const volatile void __iomem *addr) +{ + u16 val = __do_readw_be(addr); + spider_io_flush(addr); + return val; +} + +static u32 spider_readl_be(const volatile void __iomem *addr) +{ + u32 val = __do_readl_be(addr); + spider_io_flush(addr); + return val; +} + +static u64 spider_readq_be(const volatile void __iomem *addr) +{ + u64 val = __do_readq_be(addr); + spider_io_flush(addr); + return val; +} + +static void spider_readsb(const volatile void __iomem *addr, void *buf, + unsigned long count) +{ + __do_readsb(addr, buf, count); + spider_io_flush(addr); +} + +static void spider_readsw(const volatile void __iomem *addr, void *buf, + unsigned long count) +{ + __do_readsw(addr, buf, count); + spider_io_flush(addr); +} + +static void spider_readsl(const volatile void __iomem *addr, void *buf, + unsigned long count) +{ + __do_readsl(addr, buf, count); + spider_io_flush(addr); +} + +static void spider_memcpy_fromio(void *dest, const volatile void __iomem *src, + unsigned long n) +{ + __do_memcpy_fromio(dest, src, n); + spider_io_flush(src); +} + + +static void __iomem * spider_ioremap(unsigned long addr, unsigned long size, + unsigned long flags) +{ + struct spider_pci_bus *bus; + void __iomem *res = __ioremap(addr, size, flags); + int busno; + + pr_debug("spider_ioremap(0x%lx, 0x%lx, 0x%lx) -> 0x%p\n", + addr, size, flags, res); + + bus = spider_pci_find(0, addr); + if (bus != NULL) { + busno = bus - spider_pci_busses; + pr_debug(" found bus %d, setting token\n", busno); + PCI_SET_ADDR_TOKEN(res, busno + 1); + } + pr_debug(" result=0x%p\n", res); + + return res; +} + +static void __init spider_pci_setup_chip(struct spider_pci_bus *bus) +{ +#ifdef SPIDER_DISABLE_PREFETCH + u32 val = in_be32(bus->regs + SPIDER_PCI_VCI_CNTL_STAT); + pr_debug(" PVCI_Control_Status was 0x%08x\n", val); + out_be32(bus->regs + SPIDER_PCI_VCI_CNTL_STAT, val | 0x8); +#endif + + /* Configure the dummy address for the workaround */ + out_be32(bus->regs + SPIDER_PCI_DUMMY_READ_BASE, 0x80000000); +} + +static void __init spider_pci_add_one(struct pci_controller *phb) +{ + struct spider_pci_bus *bus = &spider_pci_busses[spider_pci_count]; + struct device_node *np = phb->arch_data; + struct resource rsrc; + void __iomem *regs; + + if (spider_pci_count >= MAX_SPIDERS) { + printk(KERN_ERR "Too many spider bridges, workarounds" + " disabled for %s\n", np->full_name); + return; + } + + /* Get the registers for the beast */ + if (of_address_to_resource(np, 0, &rsrc)) { + printk(KERN_ERR "Failed to get registers for spider %s" + " workarounds disabled\n", np->full_name); + return; + } + + /* Mask out some useless bits in there to get to the base of the + * spider chip + */ + rsrc.start &= ~0xfffffffful; + + /* Map them */ + regs = ioremap(rsrc.start + SPIDER_PCI_REG_BASE, 0x1000); + if (regs == NULL) { + printk(KERN_ERR "Failed to map registers for spider %s" + " workarounds disabled\n", np->full_name); + return; + } + + spider_pci_count++; + + /* We assume spiders only have one MMIO resource */ + bus->mmio_start = phb->mem_resources[0].start; + bus->mmio_end = phb->mem_resources[0].end + 1; + + bus->pio_vstart = (unsigned long)phb->io_base_virt; + bus->pio_vend = bus->pio_vstart + phb->pci_io_size; + + bus->regs = regs; + + printk(KERN_INFO "PCI: Spider MMIO workaround for %s\n",np->full_name); + + pr_debug(" mmio (P) = 0x%016lx..0x%016lx\n", + bus->mmio_start, bus->mmio_end); + pr_debug(" pio (V) = 0x%016lx..0x%016lx\n", + bus->pio_vstart, bus->pio_vend); + pr_debug(" regs (P) = 0x%016lx (V) = 0x%p\n", + rsrc.start + SPIDER_PCI_REG_BASE, bus->regs); + + spider_pci_setup_chip(bus); +} + +static struct ppc_pci_io __initdata spider_pci_io = { + .readb = spider_readb, + .readw = spider_readw, + .readl = spider_readl, + .readq = spider_readq, + .readw_be = spider_readw_be, + .readl_be = spider_readl_be, + .readq_be = spider_readq_be, + .readsb = spider_readsb, + .readsw = spider_readsw, + .readsl = spider_readsl, + .memcpy_fromio = spider_memcpy_fromio, +}; + +static int __init spider_pci_workaround_init(void) +{ + struct pci_controller *phb; + + if (!machine_is(cell)) + return 0; + + /* Find spider bridges. We assume they have been all probed + * in setup_arch(). If that was to change, we would need to + * update this code to cope with dynamically added busses + */ + list_for_each_entry(phb, &hose_list, list_node) { + struct device_node *np = phb->arch_data; + const char *model = get_property(np, "model", NULL); + + /* If no model property or name isn't exactly "pci", skip */ + if (model == NULL || strcmp(np->name, "pci")) + continue; + /* If model is not "Spider", skip */ + if (strcmp(model, "Spider")) + continue; + spider_pci_add_one(phb); + } + + /* No Spider PCI found, exit */ + if (spider_pci_count == 0) + return 0; + + /* Setup IO callbacks. We only setup MMIO reads. PIO reads will + * fallback to MMIO reads (though without a token, thus slower) + */ + ppc_pci_io = spider_pci_io; + + /* Setup ioremap callback */ + ppc_md.ioremap = spider_ioremap; + + return 0; +} +arch_initcall(spider_pci_workaround_init); -- cgit v1.2.3-70-g09d2 From 92b20c40dcca2d441f367da57e7665cce15c492a Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Sat, 11 Nov 2006 17:25:14 +1100 Subject: [POWERPC] Add an optional offset to direct DMA on 64 bits This patch adds an optional global offset that can be added to DMA addresses when using the direct DMA operations. That brings it a step closer to the 32 bits direct DMA operations, and makes it useable on Cell when the MMU is disabled and we are using a spider southbridge. Signed-off-by: Benjamin Herrenschmidt Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/dma_64.c | 11 ++++++++--- include/asm-powerpc/dma-mapping.h | 2 ++ 2 files changed, 10 insertions(+), 3 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/kernel/dma_64.c b/arch/powerpc/kernel/dma_64.c index 4e655119978..1d1dc76606a 100644 --- a/arch/powerpc/kernel/dma_64.c +++ b/arch/powerpc/kernel/dma_64.c @@ -111,7 +111,11 @@ EXPORT_SYMBOL(dma_iommu_ops); /* * Generic direct DMA implementation + * + * This implementation supports a global offset that can be applied if + * the address at which memory is visible to devices is not 0. */ +unsigned long dma_direct_offset; static void *dma_direct_alloc_coherent(struct device *dev, size_t size, dma_addr_t *dma_handle, gfp_t flag) @@ -122,7 +126,7 @@ static void *dma_direct_alloc_coherent(struct device *dev, size_t size, ret = (void *)__get_free_pages(flag, get_order(size)); if (ret != NULL) { memset(ret, 0, size); - *dma_handle = virt_to_abs(ret); + *dma_handle = virt_to_abs(ret) | dma_direct_offset; } return ret; } @@ -137,7 +141,7 @@ static dma_addr_t dma_direct_map_single(struct device *dev, void *ptr, size_t size, enum dma_data_direction direction) { - return virt_to_abs(ptr); + return virt_to_abs(ptr) | dma_direct_offset; } static void dma_direct_unmap_single(struct device *dev, dma_addr_t dma_addr, @@ -152,7 +156,8 @@ static int dma_direct_map_sg(struct device *dev, struct scatterlist *sg, int i; for (i = 0; i < nents; i++, sg++) { - sg->dma_address = page_to_phys(sg->page) + sg->offset; + sg->dma_address = (page_to_phys(sg->page) + sg->offset) | + dma_direct_offset; sg->dma_length = sg->length; } diff --git a/include/asm-powerpc/dma-mapping.h b/include/asm-powerpc/dma-mapping.h index 8367810c994..7e38b5fddad 100644 --- a/include/asm-powerpc/dma-mapping.h +++ b/include/asm-powerpc/dma-mapping.h @@ -187,6 +187,8 @@ static inline void dma_unmap_sg(struct device *dev, struct scatterlist *sg, extern struct dma_mapping_ops dma_iommu_ops; extern struct dma_mapping_ops dma_direct_ops; +extern unsigned long dma_direct_offset; + #else /* CONFIG_PPC64 */ #define dma_supported(dev, mask) (1) -- cgit v1.2.3-70-g09d2 From c80d9133e99de1af607314107910a2a1645efb17 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Sat, 11 Nov 2006 17:25:16 +1100 Subject: [POWERPC] Make direct DMA use node local allocations This patch makes dma_alloc_coherent() use node local allocation when using the direct DMA ops. The node is obtained from the new device extension. If no such extension is present, the current node is used. Signed-off-by: Benjamin Herrenschmidt Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/dma_64.c | 14 +++++++++----- 1 file changed, 9 insertions(+), 5 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/kernel/dma_64.c b/arch/powerpc/kernel/dma_64.c index 1d1dc76606a..7b0e754383c 100644 --- a/arch/powerpc/kernel/dma_64.c +++ b/arch/powerpc/kernel/dma_64.c @@ -120,14 +120,18 @@ unsigned long dma_direct_offset; static void *dma_direct_alloc_coherent(struct device *dev, size_t size, dma_addr_t *dma_handle, gfp_t flag) { + struct page *page; void *ret; + int node = dev->archdata.numa_node; /* TODO: Maybe use the numa node here too ? */ - ret = (void *)__get_free_pages(flag, get_order(size)); - if (ret != NULL) { - memset(ret, 0, size); - *dma_handle = virt_to_abs(ret) | dma_direct_offset; - } + page = alloc_pages_node(node, flag, get_order(size)); + if (page == NULL) + return NULL; + ret = page_address(page); + memset(ret, 0, size); + *dma_handle = virt_to_abs(ret) | dma_direct_offset; + return ret; } -- cgit v1.2.3-70-g09d2 From acfd946a1aaffdec346c2864f596d4d92125d1ad Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Sat, 11 Nov 2006 17:25:17 +1100 Subject: [POWERPC] Make cell use direct DMA ops Now that the direct DMA ops supports an offset, we use that instead of defining our own. Signed-off-by: Benjamin Herrenschmidt Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/cell/iommu.c | 79 +++---------------------------------- 1 file changed, 6 insertions(+), 73 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/platforms/cell/iommu.c b/arch/powerpc/platforms/cell/iommu.c index e3ea5311476..6a97fe1319d 100644 --- a/arch/powerpc/platforms/cell/iommu.c +++ b/arch/powerpc/platforms/cell/iommu.c @@ -46,8 +46,6 @@ #include "iommu.h" -static dma_addr_t cell_dma_valid = SPIDER_DMA_VALID; - static inline unsigned long get_iopt_entry(unsigned long real_address, unsigned long ioid, unsigned long prot) @@ -417,83 +415,18 @@ static int cell_map_iommu(void) return 1; } -static void *cell_alloc_coherent(struct device *hwdev, size_t size, - dma_addr_t *dma_handle, gfp_t flag) -{ - void *ret; - - ret = (void *)__get_free_pages(flag, get_order(size)); - if (ret != NULL) { - memset(ret, 0, size); - *dma_handle = virt_to_abs(ret) | cell_dma_valid; - } - return ret; -} - -static void cell_free_coherent(struct device *hwdev, size_t size, - void *vaddr, dma_addr_t dma_handle) -{ - free_pages((unsigned long)vaddr, get_order(size)); -} - -static dma_addr_t cell_map_single(struct device *hwdev, void *ptr, - size_t size, enum dma_data_direction direction) -{ - return virt_to_abs(ptr) | cell_dma_valid; -} - -static void cell_unmap_single(struct device *hwdev, dma_addr_t dma_addr, - size_t size, enum dma_data_direction direction) -{ -} - -static int cell_map_sg(struct device *hwdev, struct scatterlist *sg, - int nents, enum dma_data_direction direction) -{ - int i; - - for (i = 0; i < nents; i++, sg++) { - sg->dma_address = (page_to_phys(sg->page) + sg->offset) - | cell_dma_valid; - sg->dma_length = sg->length; - } - - return nents; -} - -static void cell_unmap_sg(struct device *hwdev, struct scatterlist *sg, - int nents, enum dma_data_direction direction) -{ -} - -static int cell_dma_supported(struct device *dev, u64 mask) -{ - return mask < 0x100000000ull; -} - -static struct dma_mapping_ops cell_iommu_ops = { - .alloc_coherent = cell_alloc_coherent, - .free_coherent = cell_free_coherent, - .map_single = cell_map_single, - .unmap_single = cell_unmap_single, - .map_sg = cell_map_sg, - .unmap_sg = cell_unmap_sg, - .dma_supported = cell_dma_supported, -}; - void cell_init_iommu(void) { int setup_bus = 0; - /* If we have an Axon bridge, clear the DMA valid mask. This is fairly - * hackish but will work well enough until we have proper iommu code. - */ - if (of_find_node_by_name(NULL, "axon")) - cell_dma_valid = 0; - if (of_find_node_by_path("/mambo")) { pr_info("Not using iommu on systemsim\n"); } else { + /* If we don't have an Axon bridge, we assume we have a + * spider which requires a DMA offset + */ + if (of_find_node_by_name(NULL, "axon") == NULL) + dma_direct_offset = SPIDER_DMA_VALID; if (!(of_chosen && get_property(of_chosen, "linux,iommu-off", NULL))) @@ -509,5 +442,5 @@ void cell_init_iommu(void) } } - pci_dma_ops = &cell_iommu_ops; + pci_dma_ops = &dma_direct_ops; } -- cgit v1.2.3-70-g09d2 From 165785e5c0be3ad43e8b8eadfbd25e92c2cd002a Mon Sep 17 00:00:00 2001 From: Jeremy Kerr Date: Sat, 11 Nov 2006 17:25:18 +1100 Subject: [POWERPC] Cell iommu support This patch adds full cell iommu support (and iommu disabled mode). It implements mapping/unmapping of iommu pages on demand using the standard powerpc iommu framework. It also supports running with iommu disabled for machines with less than 2GB of memory. (The default is off in that case, though it can be forced on with the kernel command line option iommu=force). Signed-off-by: Jeremy Kerr Signed-off-by: Benjamin Herrenschmidt Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/prom_init.c | 14 +- arch/powerpc/platforms/cell/iommu.c | 1005 +++++++++++++++++++++++------------ arch/powerpc/platforms/cell/iommu.h | 67 --- arch/powerpc/platforms/cell/setup.c | 43 -- arch/powerpc/sysdev/dart_iommu.c | 3 - include/asm-powerpc/iommu.h | 6 +- 6 files changed, 663 insertions(+), 475 deletions(-) delete mode 100644 arch/powerpc/platforms/cell/iommu.h (limited to 'arch/powerpc') diff --git a/arch/powerpc/kernel/prom_init.c b/arch/powerpc/kernel/prom_init.c index b91761639d9..8671eb634a9 100644 --- a/arch/powerpc/kernel/prom_init.c +++ b/arch/powerpc/kernel/prom_init.c @@ -173,8 +173,8 @@ static unsigned long __initdata dt_string_start, dt_string_end; static unsigned long __initdata prom_initrd_start, prom_initrd_end; #ifdef CONFIG_PPC64 -static int __initdata iommu_force_on; -static int __initdata ppc64_iommu_off; +static int __initdata prom_iommu_force_on; +static int __initdata prom_iommu_off; static unsigned long __initdata prom_tce_alloc_start; static unsigned long __initdata prom_tce_alloc_end; #endif @@ -582,9 +582,9 @@ static void __init early_cmdline_parse(void) while (*opt && *opt == ' ') opt++; if (!strncmp(opt, RELOC("off"), 3)) - RELOC(ppc64_iommu_off) = 1; + RELOC(prom_iommu_off) = 1; else if (!strncmp(opt, RELOC("force"), 5)) - RELOC(iommu_force_on) = 1; + RELOC(prom_iommu_force_on) = 1; } #endif } @@ -1167,7 +1167,7 @@ static void __init prom_initialize_tce_table(void) u64 local_alloc_top, local_alloc_bottom; u64 i; - if (RELOC(ppc64_iommu_off)) + if (RELOC(prom_iommu_off)) return; prom_debug("starting prom_initialize_tce_table\n"); @@ -2283,11 +2283,11 @@ unsigned long __init prom_init(unsigned long r3, unsigned long r4, * Fill in some infos for use by the kernel later on */ #ifdef CONFIG_PPC64 - if (RELOC(ppc64_iommu_off)) + if (RELOC(prom_iommu_off)) prom_setprop(_prom->chosen, "/chosen", "linux,iommu-off", NULL, 0); - if (RELOC(iommu_force_on)) + if (RELOC(prom_iommu_force_on)) prom_setprop(_prom->chosen, "/chosen", "linux,iommu-force-on", NULL, 0); diff --git a/arch/powerpc/platforms/cell/iommu.c b/arch/powerpc/platforms/cell/iommu.c index 6a97fe1319d..b43466ba809 100644 --- a/arch/powerpc/platforms/cell/iommu.c +++ b/arch/powerpc/platforms/cell/iommu.c @@ -1,446 +1,747 @@ /* * IOMMU implementation for Cell Broadband Processor Architecture - * We just establish a linear mapping at boot by setting all the - * IOPT cache entries in the CPU. - * The mapping functions should be identical to pci_direct_iommu, - * except for the handling of the high order bit that is required - * by the Spider bridge. These should be split into a separate - * file at the point where we get a different bridge chip. * - * Copyright (C) 2005 IBM Deutschland Entwicklung GmbH, - * Arnd Bergmann + * (C) Copyright IBM Corporation 2006 * - * Based on linear mapping - * Copyright (C) 2003 Benjamin Herrenschmidt (benh@kernel.crashing.org) + * Author: Jeremy Kerr * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ #undef DEBUG #include -#include -#include -#include #include -#include -#include -#include -#include -#include +#include +#include -#include -#include -#include #include -#include +#include #include -#include -#include -#include -#include +#include #include +#include +#include -#include "iommu.h" +#include "cbe_regs.h" +#include "interrupt.h" -static inline unsigned long -get_iopt_entry(unsigned long real_address, unsigned long ioid, - unsigned long prot) -{ - return (prot & IOPT_PROT_MASK) - | (IOPT_COHERENT) - | (IOPT_ORDER_VC) - | (real_address & IOPT_RPN_MASK) - | (ioid & IOPT_IOID_MASK); -} +/* Define CELL_IOMMU_REAL_UNMAP to actually unmap non-used pages + * instead of leaving them mapped to some dummy page. This can be + * enabled once the appropriate workarounds for spider bugs have + * been enabled + */ +#define CELL_IOMMU_REAL_UNMAP + +/* Define CELL_IOMMU_STRICT_PROTECTION to enforce protection of + * IO PTEs based on the transfer direction. That can be enabled + * once spider-net has been fixed to pass the correct direction + * to the DMA mapping functions + */ +#define CELL_IOMMU_STRICT_PROTECTION + + +#define NR_IOMMUS 2 + +/* IOC mmap registers */ +#define IOC_Reg_Size 0x2000 + +#define IOC_IOPT_CacheInvd 0x908 +#define IOC_IOPT_CacheInvd_NE_Mask 0xffe0000000000000ul +#define IOC_IOPT_CacheInvd_IOPTE_Mask 0x000003fffffffff8ul +#define IOC_IOPT_CacheInvd_Busy 0x0000000000000001ul + +#define IOC_IOST_Origin 0x918 +#define IOC_IOST_Origin_E 0x8000000000000000ul +#define IOC_IOST_Origin_HW 0x0000000000000800ul +#define IOC_IOST_Origin_HL 0x0000000000000400ul + +#define IOC_IO_ExcpStat 0x920 +#define IOC_IO_ExcpStat_V 0x8000000000000000ul +#define IOC_IO_ExcpStat_SPF_Mask 0x6000000000000000ul +#define IOC_IO_ExcpStat_SPF_S 0x6000000000000000ul +#define IOC_IO_ExcpStat_SPF_P 0x4000000000000000ul +#define IOC_IO_ExcpStat_ADDR_Mask 0x00000007fffff000ul +#define IOC_IO_ExcpStat_RW_Mask 0x0000000000000800ul +#define IOC_IO_ExcpStat_IOID_Mask 0x00000000000007fful + +#define IOC_IO_ExcpMask 0x928 +#define IOC_IO_ExcpMask_SFE 0x4000000000000000ul +#define IOC_IO_ExcpMask_PFE 0x2000000000000000ul + +#define IOC_IOCmd_Offset 0x1000 + +#define IOC_IOCmd_Cfg 0xc00 +#define IOC_IOCmd_Cfg_TE 0x0000800000000000ul + + +/* Segment table entries */ +#define IOSTE_V 0x8000000000000000ul /* valid */ +#define IOSTE_H 0x4000000000000000ul /* cache hint */ +#define IOSTE_PT_Base_RPN_Mask 0x3ffffffffffff000ul /* base RPN of IOPT */ +#define IOSTE_NPPT_Mask 0x0000000000000fe0ul /* no. pages in IOPT */ +#define IOSTE_PS_Mask 0x0000000000000007ul /* page size */ +#define IOSTE_PS_4K 0x0000000000000001ul /* - 4kB */ +#define IOSTE_PS_64K 0x0000000000000003ul /* - 64kB */ +#define IOSTE_PS_1M 0x0000000000000005ul /* - 1MB */ +#define IOSTE_PS_16M 0x0000000000000007ul /* - 16MB */ + +/* Page table entries */ +#define IOPTE_PP_W 0x8000000000000000ul /* protection: write */ +#define IOPTE_PP_R 0x4000000000000000ul /* protection: read */ +#define IOPTE_M 0x2000000000000000ul /* coherency required */ +#define IOPTE_SO_R 0x1000000000000000ul /* ordering: writes */ +#define IOPTE_SO_RW 0x1800000000000000ul /* ordering: r & w */ +#define IOPTE_RPN_Mask 0x07fffffffffff000ul /* RPN */ +#define IOPTE_H 0x0000000000000800ul /* cache hint */ +#define IOPTE_IOID_Mask 0x00000000000007fful /* ioid */ + + +/* IOMMU sizing */ +#define IO_SEGMENT_SHIFT 28 +#define IO_PAGENO_BITS (IO_SEGMENT_SHIFT - IOMMU_PAGE_SHIFT) + +/* The high bit needs to be set on every DMA address */ +#define SPIDER_DMA_OFFSET 0x80000000ul + +struct iommu_window { + struct list_head list; + struct cbe_iommu *iommu; + unsigned long offset; + unsigned long size; + unsigned long pte_offset; + unsigned int ioid; + struct iommu_table table; +}; -typedef struct { - unsigned long val; -} ioste; +#define NAMESIZE 8 +struct cbe_iommu { + int nid; + char name[NAMESIZE]; + void __iomem *xlate_regs; + void __iomem *cmd_regs; + unsigned long *stab; + unsigned long *ptab; + void *pad_page; + struct list_head windows; +}; -static inline ioste -mk_ioste(unsigned long val) -{ - ioste ioste = { .val = val, }; - return ioste; -} +/* Static array of iommus, one per node + * each contains a list of windows, keyed from dma_window property + * - on bus setup, look for a matching window, or create one + * - on dev setup, assign iommu_table ptr + */ +static struct cbe_iommu iommus[NR_IOMMUS]; +static int cbe_nr_iommus; -static inline ioste -get_iost_entry(unsigned long iopt_base, unsigned long io_address, unsigned page_size) +static void invalidate_tce_cache(struct cbe_iommu *iommu, unsigned long *pte, + long n_ptes) { - unsigned long ps; - unsigned long iostep; - unsigned long nnpt; - unsigned long shift; - - switch (page_size) { - case 0x1000000: - ps = IOST_PS_16M; - nnpt = 0; /* one page per segment */ - shift = 5; /* segment has 16 iopt entries */ - break; - - case 0x100000: - ps = IOST_PS_1M; - nnpt = 0; /* one page per segment */ - shift = 1; /* segment has 256 iopt entries */ - break; - - case 0x10000: - ps = IOST_PS_64K; - nnpt = 0x07; /* 8 pages per io page table */ - shift = 0; /* all entries are used */ - break; - - case 0x1000: - ps = IOST_PS_4K; - nnpt = 0x7f; /* 128 pages per io page table */ - shift = 0; /* all entries are used */ - break; - - default: /* not a known compile time constant */ - { - /* BUILD_BUG_ON() is not usable here */ - extern void __get_iost_entry_bad_page_size(void); - __get_iost_entry_bad_page_size(); - } - break; - } + unsigned long *reg, val; + long n; - iostep = iopt_base + - /* need 8 bytes per iopte */ - (((io_address / page_size * 8) - /* align io page tables on 4k page boundaries */ - << shift) - /* nnpt+1 pages go into each iopt */ - & ~(nnpt << 12)); - - nnpt++; /* this seems to work, but the documentation is not clear - about wether we put nnpt or nnpt-1 into the ioste bits. - In theory, this can't work for 4k pages. */ - return mk_ioste(IOST_VALID_MASK - | (iostep & IOST_PT_BASE_MASK) - | ((nnpt << 5) & IOST_NNPT_MASK) - | (ps & IOST_PS_MASK)); -} + reg = iommu->xlate_regs + IOC_IOPT_CacheInvd; -/* compute the address of an io pte */ -static inline unsigned long -get_ioptep(ioste iost_entry, unsigned long io_address) -{ - unsigned long iopt_base; - unsigned long page_size; - unsigned long page_number; - unsigned long iopt_offset; - - iopt_base = iost_entry.val & IOST_PT_BASE_MASK; - page_size = iost_entry.val & IOST_PS_MASK; - - /* decode page size to compute page number */ - page_number = (io_address & 0x0fffffff) >> (10 + 2 * page_size); - /* page number is an offset into the io page table */ - iopt_offset = (page_number << 3) & 0x7fff8ul; - return iopt_base + iopt_offset; -} + while (n_ptes > 0) { + /* we can invalidate up to 1 << 11 PTEs at once */ + n = min(n_ptes, 1l << 11); + val = (((n /*- 1*/) << 53) & IOC_IOPT_CacheInvd_NE_Mask) + | (__pa(pte) & IOC_IOPT_CacheInvd_IOPTE_Mask) + | IOC_IOPT_CacheInvd_Busy; -/* compute the tag field of the iopt cache entry */ -static inline unsigned long -get_ioc_tag(ioste iost_entry, unsigned long io_address) -{ - unsigned long iopte = get_ioptep(iost_entry, io_address); + out_be64(reg, val); + while (in_be64(reg) & IOC_IOPT_CacheInvd_Busy) + ; - return IOPT_VALID_MASK - | ((iopte & 0x00000000000000ff8ul) >> 3) - | ((iopte & 0x0000003fffffc0000ul) >> 9); + n_ptes -= n; + pte += n; + } } -/* compute the hashed 6 bit index for the 4-way associative pte cache */ -static inline unsigned long -get_ioc_hash(ioste iost_entry, unsigned long io_address) +static void tce_build_cell(struct iommu_table *tbl, long index, long npages, + unsigned long uaddr, enum dma_data_direction direction) { - unsigned long iopte = get_ioptep(iost_entry, io_address); - - return ((iopte & 0x000000000000001f8ul) >> 3) - ^ ((iopte & 0x00000000000020000ul) >> 17) - ^ ((iopte & 0x00000000000010000ul) >> 15) - ^ ((iopte & 0x00000000000008000ul) >> 13) - ^ ((iopte & 0x00000000000004000ul) >> 11) - ^ ((iopte & 0x00000000000002000ul) >> 9) - ^ ((iopte & 0x00000000000001000ul) >> 7); + int i; + unsigned long *io_pte, base_pte; + struct iommu_window *window = + container_of(tbl, struct iommu_window, table); + + /* implementing proper protection causes problems with the spidernet + * driver - check mapping directions later, but allow read & write by + * default for now.*/ +#ifdef CELL_IOMMU_STRICT_PROTECTION + /* to avoid referencing a global, we use a trick here to setup the + * protection bit. "prot" is setup to be 3 fields of 4 bits apprended + * together for each of the 3 supported direction values. It is then + * shifted left so that the fields matching the desired direction + * lands on the appropriate bits, and other bits are masked out. + */ + const unsigned long prot = 0xc48; + base_pte = + ((prot << (52 + 4 * direction)) & (IOPTE_PP_W | IOPTE_PP_R)) + | IOPTE_M | IOPTE_SO_RW | (window->ioid & IOPTE_IOID_Mask); +#else + base_pte = IOPTE_PP_W | IOPTE_PP_R | IOPTE_M | IOPTE_SO_RW | + (window->ioid & IOPTE_IOID_Mask); +#endif + + io_pte = (unsigned long *)tbl->it_base + (index - window->pte_offset); + + for (i = 0; i < npages; i++, uaddr += IOMMU_PAGE_SIZE) + io_pte[i] = base_pte | (__pa(uaddr) & IOPTE_RPN_Mask); + + mb(); + + invalidate_tce_cache(window->iommu, io_pte, npages); + + pr_debug("tce_build_cell(index=%lx,n=%lx,dir=%d,base_pte=%lx)\n", + index, npages, direction, base_pte); } -/* same as above, but pretend that we have a simpler 1-way associative - pte cache with an 8 bit index */ -static inline unsigned long -get_ioc_hash_1way(ioste iost_entry, unsigned long io_address) +static void tce_free_cell(struct iommu_table *tbl, long index, long npages) { - unsigned long iopte = get_ioptep(iost_entry, io_address); - - return ((iopte & 0x000000000000001f8ul) >> 3) - ^ ((iopte & 0x00000000000020000ul) >> 17) - ^ ((iopte & 0x00000000000010000ul) >> 15) - ^ ((iopte & 0x00000000000008000ul) >> 13) - ^ ((iopte & 0x00000000000004000ul) >> 11) - ^ ((iopte & 0x00000000000002000ul) >> 9) - ^ ((iopte & 0x00000000000001000ul) >> 7) - ^ ((iopte & 0x0000000000000c000ul) >> 8); -} -static inline ioste -get_iost_cache(void __iomem *base, unsigned long index) -{ - unsigned long __iomem *p = (base + IOC_ST_CACHE_DIR); - return mk_ioste(in_be64(&p[index])); -} + int i; + unsigned long *io_pte, pte; + struct iommu_window *window = + container_of(tbl, struct iommu_window, table); -static inline void -set_iost_cache(void __iomem *base, unsigned long index, ioste ste) -{ - unsigned long __iomem *p = (base + IOC_ST_CACHE_DIR); - pr_debug("ioste %02lx was %016lx, store %016lx", index, - get_iost_cache(base, index).val, ste.val); - out_be64(&p[index], ste.val); - pr_debug(" now %016lx\n", get_iost_cache(base, index).val); -} + pr_debug("tce_free_cell(index=%lx,n=%lx)\n", index, npages); -static inline unsigned long -get_iopt_cache(void __iomem *base, unsigned long index, unsigned long *tag) -{ - unsigned long __iomem *tags = (void *)(base + IOC_PT_CACHE_DIR); - unsigned long __iomem *p = (void *)(base + IOC_PT_CACHE_REG); +#ifdef CELL_IOMMU_REAL_UNMAP + pte = 0; +#else + /* spider bridge does PCI reads after freeing - insert a mapping + * to a scratch page instead of an invalid entry */ + pte = IOPTE_PP_R | IOPTE_M | IOPTE_SO_RW | __pa(window->iommu->pad_page) + | (window->ioid & IOPTE_IOID_Mask); +#endif - *tag = tags[index]; - rmb(); - return *p; -} + io_pte = (unsigned long *)tbl->it_base + (index - window->pte_offset); -static inline void -set_iopt_cache(void __iomem *base, unsigned long index, - unsigned long tag, unsigned long val) -{ - unsigned long __iomem *tags = base + IOC_PT_CACHE_DIR; - unsigned long __iomem *p = base + IOC_PT_CACHE_REG; + for (i = 0; i < npages; i++) + io_pte[i] = pte; + + mb(); - out_be64(p, val); - out_be64(&tags[index], tag); + invalidate_tce_cache(window->iommu, io_pte, npages); } -static inline void -set_iost_origin(void __iomem *base) +static irqreturn_t ioc_interrupt(int irq, void *data) { - unsigned long __iomem *p = base + IOC_ST_ORIGIN; - unsigned long origin = IOSTO_ENABLE | IOSTO_SW; - - pr_debug("iost_origin %016lx, now %016lx\n", in_be64(p), origin); - out_be64(p, origin); + unsigned long stat; + struct cbe_iommu *iommu = data; + + stat = in_be64(iommu->xlate_regs + IOC_IO_ExcpStat); + + /* Might want to rate limit it */ + printk(KERN_ERR "iommu: DMA exception 0x%016lx\n", stat); + printk(KERN_ERR " V=%d, SPF=[%c%c], RW=%s, IOID=0x%04x\n", + !!(stat & IOC_IO_ExcpStat_V), + (stat & IOC_IO_ExcpStat_SPF_S) ? 'S' : ' ', + (stat & IOC_IO_ExcpStat_SPF_P) ? 'P' : ' ', + (stat & IOC_IO_ExcpStat_RW_Mask) ? "Read" : "Write", + (unsigned int)(stat & IOC_IO_ExcpStat_IOID_Mask)); + printk(KERN_ERR " page=0x%016lx\n", + stat & IOC_IO_ExcpStat_ADDR_Mask); + + /* clear interrupt */ + stat &= ~IOC_IO_ExcpStat_V; + out_be64(iommu->xlate_regs + IOC_IO_ExcpStat, stat); + + return IRQ_HANDLED; } -static inline void -set_iocmd_config(void __iomem *base) +static int cell_iommu_find_ioc(int nid, unsigned long *base) { - unsigned long __iomem *p = base + 0xc00; - unsigned long conf; + struct device_node *np; + struct resource r; + + *base = 0; + + /* First look for new style /be nodes */ + for_each_node_by_name(np, "ioc") { + if (of_node_to_nid(np) != nid) + continue; + if (of_address_to_resource(np, 0, &r)) { + printk(KERN_ERR "iommu: can't get address for %s\n", + np->full_name); + continue; + } + *base = r.start; + of_node_put(np); + return 0; + } + + /* Ok, let's try the old way */ + for_each_node_by_type(np, "cpu") { + const unsigned int *nidp; + const unsigned long *tmp; + + nidp = get_property(np, "node-id", NULL); + if (nidp && *nidp == nid) { + tmp = get_property(np, "ioc-translation", NULL); + if (tmp) { + *base = *tmp; + of_node_put(np); + return 0; + } + } + } - conf = in_be64(p); - pr_debug("iost_conf %016lx, now %016lx\n", conf, conf | IOCMD_CONF_TE); - out_be64(p, conf | IOCMD_CONF_TE); + return -ENODEV; } -static void enable_mapping(void __iomem *base, void __iomem *mmio_base) +static void cell_iommu_setup_hardware(struct cbe_iommu *iommu, unsigned long size) { - set_iocmd_config(base); - set_iost_origin(mmio_base); -} + struct page *page; + int ret, i; + unsigned long reg, segments, pages_per_segment, ptab_size, n_pte_pages; + unsigned long xlate_base; + unsigned int virq; + + if (cell_iommu_find_ioc(iommu->nid, &xlate_base)) + panic("%s: missing IOC register mappings for node %d\n", + __FUNCTION__, iommu->nid); + + iommu->xlate_regs = ioremap(xlate_base, IOC_Reg_Size); + iommu->cmd_regs = iommu->xlate_regs + IOC_IOCmd_Offset; + + segments = size >> IO_SEGMENT_SHIFT; + pages_per_segment = 1ull << IO_PAGENO_BITS; + + pr_debug("%s: iommu[%d]: segments: %lu, pages per segment: %lu\n", + __FUNCTION__, iommu->nid, segments, pages_per_segment); + + /* set up the segment table */ + page = alloc_pages_node(iommu->nid, GFP_KERNEL, 0); + BUG_ON(!page); + iommu->stab = page_address(page); + clear_page(iommu->stab); + + /* ... and the page tables. Since these are contiguous, we can treat + * the page tables as one array of ptes, like pSeries does. + */ + ptab_size = segments * pages_per_segment * sizeof(unsigned long); + pr_debug("%s: iommu[%d]: ptab_size: %lu, order: %d\n", __FUNCTION__, + iommu->nid, ptab_size, get_order(ptab_size)); + page = alloc_pages_node(iommu->nid, GFP_KERNEL, get_order(ptab_size)); + BUG_ON(!page); + + iommu->ptab = page_address(page); + memset(iommu->ptab, 0, ptab_size); + + /* allocate a bogus page for the end of each mapping */ + page = alloc_pages_node(iommu->nid, GFP_KERNEL, 0); + BUG_ON(!page); + iommu->pad_page = page_address(page); + clear_page(iommu->pad_page); + + /* number of pages needed for a page table */ + n_pte_pages = (pages_per_segment * + sizeof(unsigned long)) >> IOMMU_PAGE_SHIFT; + + pr_debug("%s: iommu[%d]: stab at %p, ptab at %p, n_pte_pages: %lu\n", + __FUNCTION__, iommu->nid, iommu->stab, iommu->ptab, + n_pte_pages); + + /* initialise the STEs */ + reg = IOSTE_V | ((n_pte_pages - 1) << 5); + + if (IOMMU_PAGE_SIZE == 0x1000) + reg |= IOSTE_PS_4K; + else if (IOMMU_PAGE_SIZE == 0x10000) + reg |= IOSTE_PS_64K; + else { + extern void __unknown_page_size_error(void); + __unknown_page_size_error(); + } -struct cell_iommu { - unsigned long base; - unsigned long mmio_base; - void __iomem *mapped_base; - void __iomem *mapped_mmio_base; -}; + pr_debug("Setting up IOMMU stab:\n"); + for (i = 0; i * (1ul << IO_SEGMENT_SHIFT) < size; i++) { + iommu->stab[i] = reg | + (__pa(iommu->ptab) + n_pte_pages * IOMMU_PAGE_SIZE * i); + pr_debug("\t[%d] 0x%016lx\n", i, iommu->stab[i]); + } + + /* ensure that the STEs have updated */ + mb(); + + /* setup interrupts for the iommu. */ + reg = in_be64(iommu->xlate_regs + IOC_IO_ExcpStat); + out_be64(iommu->xlate_regs + IOC_IO_ExcpStat, + reg & ~IOC_IO_ExcpStat_V); + out_be64(iommu->xlate_regs + IOC_IO_ExcpMask, + IOC_IO_ExcpMask_PFE | IOC_IO_ExcpMask_SFE); + + virq = irq_create_mapping(NULL, + IIC_IRQ_IOEX_ATI | (iommu->nid << IIC_IRQ_NODE_SHIFT)); + BUG_ON(virq == NO_IRQ); + + ret = request_irq(virq, ioc_interrupt, IRQF_DISABLED, + iommu->name, iommu); + BUG_ON(ret); -static struct cell_iommu cell_iommus[NR_CPUS]; + /* set the IOC segment table origin register (and turn on the iommu) */ + reg = IOC_IOST_Origin_E | __pa(iommu->stab) | IOC_IOST_Origin_HW; + out_be64(iommu->xlate_regs + IOC_IOST_Origin, reg); + in_be64(iommu->xlate_regs + IOC_IOST_Origin); -/* initialize the iommu to support a simple linear mapping - * for each DMA window used by any device. For now, we - * happen to know that there is only one DMA window in use, - * starting at iopt_phys_offset. */ -static void cell_do_map_iommu(struct cell_iommu *iommu, - unsigned int ioid, - unsigned long map_start, - unsigned long map_size) + /* turn on IO translation */ + reg = in_be64(iommu->cmd_regs + IOC_IOCmd_Cfg) | IOC_IOCmd_Cfg_TE; + out_be64(iommu->cmd_regs + IOC_IOCmd_Cfg, reg); +} + +#if 0/* Unused for now */ +static struct iommu_window *find_window(struct cbe_iommu *iommu, + unsigned long offset, unsigned long size) { - unsigned long io_address, real_address; - void __iomem *ioc_base, *ioc_mmio_base; - ioste ioste; - unsigned long index; + struct iommu_window *window; - /* we pretend the io page table was at a very high address */ - const unsigned long fake_iopt = 0x10000000000ul; - const unsigned long io_page_size = 0x1000000; /* use 16M pages */ - const unsigned long io_segment_size = 0x10000000; /* 256M */ - - ioc_base = iommu->mapped_base; - ioc_mmio_base = iommu->mapped_mmio_base; - - for (real_address = 0, io_address = map_start; - io_address <= map_start + map_size; - real_address += io_page_size, io_address += io_page_size) { - ioste = get_iost_entry(fake_iopt, io_address, io_page_size); - if ((real_address % io_segment_size) == 0) /* segment start */ - set_iost_cache(ioc_mmio_base, - io_address >> 28, ioste); - index = get_ioc_hash_1way(ioste, io_address); - pr_debug("addr %08lx, index %02lx, ioste %016lx\n", - io_address, index, ioste.val); - set_iopt_cache(ioc_mmio_base, - get_ioc_hash_1way(ioste, io_address), - get_ioc_tag(ioste, io_address), - get_iopt_entry(real_address, ioid, IOPT_PROT_RW)); + /* todo: check for overlapping (but not equal) windows) */ + + list_for_each_entry(window, &(iommu->windows), list) { + if (window->offset == offset && window->size == size) + return window; } + + return NULL; } +#endif -static void pci_dma_cell_bus_setup(struct pci_bus *b) +static struct iommu_window * __init +cell_iommu_setup_window(struct cbe_iommu *iommu, struct device_node *np, + unsigned long offset, unsigned long size, + unsigned long pte_offset) { + struct iommu_window *window; const unsigned int *ioid; - unsigned long map_start, map_size, token; - const unsigned long *dma_window; - struct cell_iommu *iommu; - struct device_node *d; - - d = pci_bus_to_OF_node(b); - ioid = get_property(d, "ioid", NULL); - if (!ioid) - pr_debug("No ioid entry found !\n"); + ioid = get_property(np, "ioid", NULL); + if (ioid == NULL) + printk(KERN_WARNING "iommu: missing ioid for %s using 0\n", + np->full_name); + + window = kmalloc_node(sizeof(*window), GFP_KERNEL, iommu->nid); + BUG_ON(window == NULL); + + window->offset = offset; + window->size = size; + window->ioid = ioid ? *ioid : 0; + window->iommu = iommu; + window->pte_offset = pte_offset; + + window->table.it_blocksize = 16; + window->table.it_base = (unsigned long)iommu->ptab; + window->table.it_index = iommu->nid; + window->table.it_offset = (offset >> IOMMU_PAGE_SHIFT) + + window->pte_offset; + window->table.it_size = size >> IOMMU_PAGE_SHIFT; + + iommu_init_table(&window->table, iommu->nid); + + pr_debug("\tioid %d\n", window->ioid); + pr_debug("\tblocksize %ld\n", window->table.it_blocksize); + pr_debug("\tbase 0x%016lx\n", window->table.it_base); + pr_debug("\toffset 0x%lx\n", window->table.it_offset); + pr_debug("\tsize %ld\n", window->table.it_size); + + list_add(&window->list, &iommu->windows); + + if (offset != 0) + return window; + + /* We need to map and reserve the first IOMMU page since it's used + * by the spider workaround. In theory, we only need to do that when + * running on spider but it doesn't really matter. + * + * This code also assumes that we have a window that starts at 0, + * which is the case on all spider based blades. + */ + __set_bit(0, window->table.it_map); + tce_build_cell(&window->table, window->table.it_offset, 1, + (unsigned long)iommu->pad_page, DMA_TO_DEVICE); + window->table.it_hint = window->table.it_blocksize; + + return window; +} - dma_window = get_property(d, "ibm,dma-window", NULL); - if (!dma_window) - pr_debug("No ibm,dma-window entry found !\n"); +static struct cbe_iommu *cell_iommu_for_node(int nid) +{ + int i; - map_start = dma_window[1]; - map_size = dma_window[2]; - token = dma_window[0] >> 32; + for (i = 0; i < cbe_nr_iommus; i++) + if (iommus[i].nid == nid) + return &iommus[i]; + return NULL; +} - iommu = &cell_iommus[token]; +static void cell_dma_dev_setup(struct device *dev) +{ + struct iommu_window *window; + struct cbe_iommu *iommu; + struct dev_archdata *archdata = &dev->archdata; + + /* If we run without iommu, no need to do anything */ + if (pci_dma_ops == &dma_direct_ops) + return; + + /* Current implementation uses the first window available in that + * node's iommu. We -might- do something smarter later though it may + * never be necessary + */ + iommu = cell_iommu_for_node(archdata->numa_node); + if (iommu == NULL || list_empty(&iommu->windows)) { + printk(KERN_ERR "iommu: missing iommu for %s (node %d)\n", + archdata->of_node ? archdata->of_node->full_name : "?", + archdata->numa_node); + return; + } + window = list_entry(iommu->windows.next, struct iommu_window, list); - cell_do_map_iommu(iommu, *ioid, map_start, map_size); + archdata->dma_data = &window->table; } - -static int cell_map_iommu_hardcoded(int num_nodes) +static void cell_pci_dma_dev_setup(struct pci_dev *dev) { - struct cell_iommu *iommu = NULL; + cell_dma_dev_setup(&dev->dev); +} - pr_debug("%s(%d): Using hardcoded defaults\n", __FUNCTION__, __LINE__); +static int cell_of_bus_notify(struct notifier_block *nb, unsigned long action, + void *data) +{ + struct device *dev = data; - /* node 0 */ - iommu = &cell_iommus[0]; - iommu->mapped_base = ioremap(0x20000511000ul, 0x1000); - iommu->mapped_mmio_base = ioremap(0x20000510000ul, 0x1000); + /* We are only intereted in device addition */ + if (action != BUS_NOTIFY_ADD_DEVICE) + return 0; - enable_mapping(iommu->mapped_base, iommu->mapped_mmio_base); + /* We use the PCI DMA ops */ + dev->archdata.dma_ops = pci_dma_ops; - cell_do_map_iommu(iommu, 0x048a, - 0x20000000ul,0x20000000ul); + cell_dma_dev_setup(dev); - if (num_nodes < 2) - return 0; + return 0; +} - /* node 1 */ - iommu = &cell_iommus[1]; - iommu->mapped_base = ioremap(0x30000511000ul, 0x1000); - iommu->mapped_mmio_base = ioremap(0x30000510000ul, 0x1000); +static struct notifier_block cell_of_bus_notifier = { + .notifier_call = cell_of_bus_notify +}; - enable_mapping(iommu->mapped_base, iommu->mapped_mmio_base); +static int __init cell_iommu_get_window(struct device_node *np, + unsigned long *base, + unsigned long *size) +{ + const void *dma_window; + unsigned long index; - cell_do_map_iommu(iommu, 0x048a, - 0x20000000,0x20000000ul); + /* Use ibm,dma-window if available, else, hard code ! */ + dma_window = get_property(np, "ibm,dma-window", NULL); + if (dma_window == NULL) { + *base = 0; + *size = 0x80000000u; + return -ENODEV; + } + of_parse_dma_window(np, dma_window, &index, base, size); return 0; } - -static int cell_map_iommu(void) +static void __init cell_iommu_init_one(struct device_node *np, unsigned long offset) { - unsigned int num_nodes = 0; - const unsigned int *node_id; - const unsigned long *base, *mmio_base; - struct device_node *dn; - struct cell_iommu *iommu = NULL; - - /* determine number of nodes (=iommus) */ - pr_debug("%s(%d): determining number of nodes...", __FUNCTION__, __LINE__); - for(dn = of_find_node_by_type(NULL, "cpu"); - dn; - dn = of_find_node_by_type(dn, "cpu")) { - node_id = get_property(dn, "node-id", NULL); - - if (num_nodes < *node_id) - num_nodes = *node_id; - } + struct cbe_iommu *iommu; + unsigned long base, size; + int nid, i; + + /* Get node ID */ + nid = of_node_to_nid(np); + if (nid < 0) { + printk(KERN_ERR "iommu: failed to get node for %s\n", + np->full_name); + return; + } + pr_debug("iommu: setting up iommu for node %d (%s)\n", + nid, np->full_name); + + /* XXX todo: If we can have multiple windows on the same IOMMU, which + * isn't the case today, we probably want here to check wether the + * iommu for that node is already setup. + * However, there might be issue with getting the size right so let's + * ignore that for now. We might want to completely get rid of the + * multiple window support since the cell iommu supports per-page ioids + */ + + if (cbe_nr_iommus >= NR_IOMMUS) { + printk(KERN_ERR "iommu: too many IOMMUs detected ! (%s)\n", + np->full_name); + return; + } + + /* Init base fields */ + i = cbe_nr_iommus++; + iommu = &iommus[i]; + iommu->stab = 0; + iommu->nid = nid; + snprintf(iommu->name, sizeof(iommu->name), "iommu%d", i); + INIT_LIST_HEAD(&iommu->windows); - num_nodes++; - pr_debug("%i found.\n", num_nodes); + /* Obtain a window for it */ + cell_iommu_get_window(np, &base, &size); - /* map the iommu registers for each node */ - pr_debug("%s(%d): Looping through nodes\n", __FUNCTION__, __LINE__); - for(dn = of_find_node_by_type(NULL, "cpu"); - dn; - dn = of_find_node_by_type(dn, "cpu")) { + pr_debug("\ttranslating window 0x%lx...0x%lx\n", + base, base + size - 1); - node_id = get_property(dn, "node-id", NULL); - base = get_property(dn, "ioc-cache", NULL); - mmio_base = get_property(dn, "ioc-translation", NULL); + /* Initialize the hardware */ + cell_iommu_setup_hardware(iommu, size); - if (!base || !mmio_base || !node_id) - return cell_map_iommu_hardcoded(num_nodes); + /* Setup the iommu_table */ + cell_iommu_setup_window(iommu, np, base, size, + offset >> IOMMU_PAGE_SHIFT); +} - iommu = &cell_iommus[*node_id]; - iommu->base = *base; - iommu->mmio_base = *mmio_base; +static void __init cell_disable_iommus(void) +{ + int node; + unsigned long base, val; + void __iomem *xregs, *cregs; + + /* Make sure IOC translation is disabled on all nodes */ + for_each_online_node(node) { + if (cell_iommu_find_ioc(node, &base)) + continue; + xregs = ioremap(base, IOC_Reg_Size); + if (xregs == NULL) + continue; + cregs = xregs + IOC_IOCmd_Offset; + + pr_debug("iommu: cleaning up iommu on node %d\n", node); + + out_be64(xregs + IOC_IOST_Origin, 0); + (void)in_be64(xregs + IOC_IOST_Origin); + val = in_be64(cregs + IOC_IOCmd_Cfg); + val &= ~IOC_IOCmd_Cfg_TE; + out_be64(cregs + IOC_IOCmd_Cfg, val); + (void)in_be64(cregs + IOC_IOCmd_Cfg); + + iounmap(xregs); + } +} - iommu->mapped_base = ioremap(*base, 0x1000); - iommu->mapped_mmio_base = ioremap(*mmio_base, 0x1000); +static int __init cell_iommu_init_disabled(void) +{ + struct device_node *np = NULL; + unsigned long base = 0, size; - enable_mapping(iommu->mapped_base, - iommu->mapped_mmio_base); + /* When no iommu is present, we use direct DMA ops */ + pci_dma_ops = &dma_direct_ops; - /* everything else will be done in iommu_bus_setup */ + /* First make sure all IOC translation is turned off */ + cell_disable_iommus(); + + /* If we have no Axon, we set up the spider DMA magic offset */ + if (of_find_node_by_name(NULL, "axon") == NULL) + dma_direct_offset = SPIDER_DMA_OFFSET; + + /* Now we need to check to see where the memory is mapped + * in PCI space. We assume that all busses use the same dma + * window which is always the case so far on Cell, thus we + * pick up the first pci-internal node we can find and check + * the DMA window from there. + */ + for_each_node_by_name(np, "axon") { + if (np->parent == NULL || np->parent->parent != NULL) + continue; + if (cell_iommu_get_window(np, &base, &size) == 0) + break; + } + if (np == NULL) { + for_each_node_by_name(np, "pci-internal") { + if (np->parent == NULL || np->parent->parent != NULL) + continue; + if (cell_iommu_get_window(np, &base, &size) == 0) + break; + } + } + of_node_put(np); + + /* If we found a DMA window, we check if it's big enough to enclose + * all of physical memory. If not, we force enable IOMMU + */ + if (np && size < lmb_end_of_DRAM()) { + printk(KERN_WARNING "iommu: force-enabled, dma window" + " (%ldMB) smaller than total memory (%ldMB)\n", + size >> 20, lmb_end_of_DRAM() >> 20); + return -ENODEV; } - return 1; + dma_direct_offset += base; + + printk("iommu: disabled, direct DMA offset is 0x%lx\n", + dma_direct_offset); + + return 0; } -void cell_init_iommu(void) +static int __init cell_iommu_init(void) { - int setup_bus = 0; - - if (of_find_node_by_path("/mambo")) { - pr_info("Not using iommu on systemsim\n"); - } else { - /* If we don't have an Axon bridge, we assume we have a - * spider which requires a DMA offset - */ - if (of_find_node_by_name(NULL, "axon") == NULL) - dma_direct_offset = SPIDER_DMA_VALID; - - if (!(of_chosen && - get_property(of_chosen, "linux,iommu-off", NULL))) - setup_bus = cell_map_iommu(); - - if (setup_bus) { - pr_debug("%s: IOMMU mapping activated\n", __FUNCTION__); - ppc_md.pci_dma_bus_setup = pci_dma_cell_bus_setup; - } else { - pr_debug("%s: IOMMU mapping activated, " - "no device action necessary\n", __FUNCTION__); - /* Direct I/O, IOMMU off */ - } + struct device_node *np; + + if (!machine_is(cell)) + return -ENODEV; + + /* If IOMMU is disabled or we have little enough RAM to not need + * to enable it, we setup a direct mapping. + * + * Note: should we make sure we have the IOMMU actually disabled ? + */ + if (iommu_is_off || + (!iommu_force_on && lmb_end_of_DRAM() <= 0x80000000ull)) + if (cell_iommu_init_disabled() == 0) + goto bail; + + /* Setup various ppc_md. callbacks */ + ppc_md.pci_dma_dev_setup = cell_pci_dma_dev_setup; + ppc_md.tce_build = tce_build_cell; + ppc_md.tce_free = tce_free_cell; + + /* Create an iommu for each /axon node. */ + for_each_node_by_name(np, "axon") { + if (np->parent == NULL || np->parent->parent != NULL) + continue; + cell_iommu_init_one(np, 0); } - pci_dma_ops = &dma_direct_ops; + /* Create an iommu for each toplevel /pci-internal node for + * old hardware/firmware + */ + for_each_node_by_name(np, "pci-internal") { + if (np->parent == NULL || np->parent->parent != NULL) + continue; + cell_iommu_init_one(np, SPIDER_DMA_OFFSET); + } + + /* Setup default PCI iommu ops */ + pci_dma_ops = &dma_iommu_ops; + + bail: + /* Register callbacks on OF platform device addition/removal + * to handle linking them to the right DMA operations + */ + bus_register_notifier(&of_platform_bus_type, &cell_of_bus_notifier); + + return 0; } +arch_initcall(cell_iommu_init); + diff --git a/arch/powerpc/platforms/cell/iommu.h b/arch/powerpc/platforms/cell/iommu.h deleted file mode 100644 index 2a9ab95604a..00000000000 --- a/arch/powerpc/platforms/cell/iommu.h +++ /dev/null @@ -1,67 +0,0 @@ -#ifndef CELL_IOMMU_H -#define CELL_IOMMU_H - -/* some constants */ -enum { - /* segment table entries */ - IOST_VALID_MASK = 0x8000000000000000ul, - IOST_TAG_MASK = 0x3000000000000000ul, - IOST_PT_BASE_MASK = 0x000003fffffff000ul, - IOST_NNPT_MASK = 0x0000000000000fe0ul, - IOST_PS_MASK = 0x000000000000000ful, - - IOST_PS_4K = 0x1, - IOST_PS_64K = 0x3, - IOST_PS_1M = 0x5, - IOST_PS_16M = 0x7, - - /* iopt tag register */ - IOPT_VALID_MASK = 0x0000000200000000ul, - IOPT_TAG_MASK = 0x00000001fffffffful, - - /* iopt cache register */ - IOPT_PROT_MASK = 0xc000000000000000ul, - IOPT_PROT_NONE = 0x0000000000000000ul, - IOPT_PROT_READ = 0x4000000000000000ul, - IOPT_PROT_WRITE = 0x8000000000000000ul, - IOPT_PROT_RW = 0xc000000000000000ul, - IOPT_COHERENT = 0x2000000000000000ul, - - IOPT_ORDER_MASK = 0x1800000000000000ul, - /* order access to same IOID/VC on same address */ - IOPT_ORDER_ADDR = 0x0800000000000000ul, - /* similar, but only after a write access */ - IOPT_ORDER_WRITES = 0x1000000000000000ul, - /* Order all accesses to same IOID/VC */ - IOPT_ORDER_VC = 0x1800000000000000ul, - - IOPT_RPN_MASK = 0x000003fffffff000ul, - IOPT_HINT_MASK = 0x0000000000000800ul, - IOPT_IOID_MASK = 0x00000000000007fful, - - IOSTO_ENABLE = 0x8000000000000000ul, - IOSTO_ORIGIN = 0x000003fffffff000ul, - IOSTO_HW = 0x0000000000000800ul, - IOSTO_SW = 0x0000000000000400ul, - - IOCMD_CONF_TE = 0x0000800000000000ul, - - /* memory mapped registers */ - IOC_PT_CACHE_DIR = 0x000, - IOC_ST_CACHE_DIR = 0x800, - IOC_PT_CACHE_REG = 0x910, - IOC_ST_ORIGIN = 0x918, - IOC_CONF = 0x930, - - /* The high bit needs to be set on every DMA address when using - * a spider bridge and only 2GB are addressable with the current - * iommu code. - */ - SPIDER_DMA_VALID = 0x80000000, - CELL_DMA_MASK = 0x7fffffff, -}; - - -void cell_init_iommu(void); - -#endif diff --git a/arch/powerpc/platforms/cell/setup.c b/arch/powerpc/platforms/cell/setup.c index 7e18420166c..83d5d0c2faf 100644 --- a/arch/powerpc/platforms/cell/setup.c +++ b/arch/powerpc/platforms/cell/setup.c @@ -30,7 +30,6 @@ #include #include #include -#include #include #include @@ -55,7 +54,6 @@ #include #include "interrupt.h" -#include "iommu.h" #include "cbe_regs.h" #include "pervasive.h" #include "ras.h" @@ -83,38 +81,11 @@ static void cell_progress(char *s, unsigned short hex) printk("*** %04x : %s\n", hex, s ? s : ""); } -static int cell_of_bus_notify(struct notifier_block *nb, unsigned long action, - void *data) -{ - struct device *dev = data; - - if (action != BUS_NOTIFY_ADD_DEVICE) - return 0; - - /* For now, we just use the PCI DMA ops for everything, though - * we'll need something better when we have a real iommu - * implementation. - */ - dev->archdata.dma_ops = pci_dma_ops; - - return 0; -} - -static struct notifier_block cell_of_bus_notifier = { - .notifier_call = cell_of_bus_notify -}; - - static int __init cell_publish_devices(void) { if (!machine_is(cell)) return 0; - /* Register callbacks on OF platform device addition/removal - * to handle linking them to the right DMA operations - */ - bus_register_notifier(&of_platform_bus_type, &cell_of_bus_notifier); - /* Publish OF platform devices for southbridge IOs */ of_platform_bus_probe(NULL, NULL, NULL); @@ -205,19 +176,6 @@ static void __init cell_setup_arch(void) mmio_nvram_init(); } -/* - * Early initialization. Relocation is on but do not reference unbolted pages - */ -static void __init cell_init_early(void) -{ - DBG(" -> cell_init_early()\n"); - - cell_init_iommu(); - - DBG(" <- cell_init_early()\n"); -} - - static int __init cell_probe(void) { unsigned long root = of_get_flat_dt_root(); @@ -244,7 +202,6 @@ define_machine(cell) { .name = "Cell", .probe = cell_probe, .setup_arch = cell_setup_arch, - .init_early = cell_init_early, .show_cpuinfo = cell_show_cpuinfo, .restart = rtas_restart, .power_off = rtas_power_off, diff --git a/arch/powerpc/sysdev/dart_iommu.c b/arch/powerpc/sysdev/dart_iommu.c index ac784bb5728..1488535b0e1 100644 --- a/arch/powerpc/sysdev/dart_iommu.c +++ b/arch/powerpc/sysdev/dart_iommu.c @@ -48,9 +48,6 @@ #include "dart.h" -extern int iommu_is_off; -extern int iommu_force_on; - /* Physical base address and size of the DART table */ unsigned long dart_tablebase; /* exported to htab_initialize */ static unsigned long dart_tablesize; diff --git a/include/asm-powerpc/iommu.h b/include/asm-powerpc/iommu.h index 19403183dbb..f85dbd30555 100644 --- a/include/asm-powerpc/iommu.h +++ b/include/asm-powerpc/iommu.h @@ -34,7 +34,9 @@ #define IOMMU_PAGE_MASK (~((1 << IOMMU_PAGE_SHIFT) - 1)) #define IOMMU_PAGE_ALIGN(addr) _ALIGN_UP(addr, IOMMU_PAGE_SIZE) -#ifndef __ASSEMBLY__ +/* Boot time flags */ +extern int iommu_is_off; +extern int iommu_force_on; /* Pure 2^n version of get_order */ static __inline__ __attribute_const__ int get_iommu_order(unsigned long size) @@ -42,8 +44,6 @@ static __inline__ __attribute_const__ int get_iommu_order(unsigned long size) return __ilog2((size - 1) >> IOMMU_PAGE_SHIFT) + 1; } -#endif /* __ASSEMBLY__ */ - /* * IOMAP_MAX_ORDER defines the largest contiguous block -- cgit v1.2.3-70-g09d2 From 3d1ea8e8cb4d497a2dd73176cc82095b8f193589 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Sat, 11 Nov 2006 17:25:19 +1100 Subject: [POWERPC] Remove ioremap64 and fixup_bigphys_addr In order to suppose platforms with devices above 4Gb on 32 bits platforms with a >32 bits physical address space, we used to have a special ioremap64 along with a fixup routine fixup_bigphys_addr. This shouldn't be necessary anymore as struct resource now supports 64 bits addresses even on 32 bits archs. This patch enables that option when CONFIG_PHYS_64BIT is set and removes ioremap64 and fixup_bigphys_addr. This is a preliminary work for the upcoming merge of 32 and 64 bits io.h Signed-off-by: Benjamin Herrenschmidt Signed-off-by: Paul Mackerras --- arch/powerpc/Kconfig | 1 + arch/powerpc/mm/pgtable_32.c | 17 ----------------- arch/powerpc/platforms/85xx/misc.c | 8 -------- 3 files changed, 1 insertion(+), 25 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index 9547aacc319..b4a3b699433 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -247,6 +247,7 @@ config PTE_64BIT config PHYS_64BIT bool 'Large physical address support' if E500 depends on 44x || E500 + select RESOURCES_64BIT default y if 44x ---help--- This option enables kernel support for larger than 32-bit physical diff --git a/arch/powerpc/mm/pgtable_32.c b/arch/powerpc/mm/pgtable_32.c index 8fcacb0239d..7750c442568 100644 --- a/arch/powerpc/mm/pgtable_32.c +++ b/arch/powerpc/mm/pgtable_32.c @@ -141,28 +141,11 @@ void pte_free(struct page *ptepage) __free_page(ptepage); } -#ifndef CONFIG_PHYS_64BIT void __iomem * ioremap(phys_addr_t addr, unsigned long size) { return __ioremap(addr, size, _PAGE_NO_CACHE); } -#else /* CONFIG_PHYS_64BIT */ -void __iomem * -ioremap64(unsigned long long addr, unsigned long size) -{ - return __ioremap(addr, size, _PAGE_NO_CACHE); -} -EXPORT_SYMBOL(ioremap64); - -void __iomem * -ioremap(phys_addr_t addr, unsigned long size) -{ - phys_addr_t addr64 = fixup_bigphys_addr(addr, size); - - return ioremap64(addr64, size); -} -#endif /* CONFIG_PHYS_64BIT */ EXPORT_SYMBOL(ioremap); void __iomem * diff --git a/arch/powerpc/platforms/85xx/misc.c b/arch/powerpc/platforms/85xx/misc.c index 26c5e822c7c..3e62fcb04c1 100644 --- a/arch/powerpc/platforms/85xx/misc.c +++ b/arch/powerpc/platforms/85xx/misc.c @@ -21,11 +21,3 @@ void mpc85xx_restart(char *cmd) local_irq_disable(); abort(); } - -/* For now this is a pass through */ -phys_addr_t fixup_bigphys_addr(phys_addr_t addr, phys_addr_t size) -{ - return addr; -}; - -EXPORT_SYMBOL(fixup_bigphys_addr); -- cgit v1.2.3-70-g09d2 From 68a64357d15ae4f596e92715719071952006e83c Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Mon, 13 Nov 2006 09:27:39 +1100 Subject: [POWERPC] Merge 32 and 64 bits asm-powerpc/io.h powerpc: Merge 32 and 64 bits asm-powerpc/io.h The rework on io.h done for the new hookable accessors made it easier, so I just finished the work and merged 32 and 64 bits io.h for arch/powerpc. arch/ppc still uses the old version in asm-ppc, there is just too much gunk in there that I really can't be bothered trying to cleanup. Signed-off-by: Benjamin Herrenschmidt Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/Makefile | 2 +- arch/powerpc/kernel/io.c | 87 ++++++++++ arch/powerpc/kernel/iomap.c | 2 +- arch/powerpc/kernel/pci_32.c | 34 +--- arch/powerpc/kernel/rtas_pci.c | 1 + arch/powerpc/kernel/traps.c | 8 +- arch/powerpc/mm/pgtable_32.c | 22 +-- arch/powerpc/mm/pgtable_64.c | 16 +- arch/powerpc/platforms/chrp/setup.c | 1 - arch/powerpc/platforms/iseries/setup.c | 4 +- arch/powerpc/platforms/powermac/setup.c | 2 - include/asm-powerpc/eeh.h | 95 +---------- include/asm-powerpc/ide.h | 7 - include/asm-powerpc/io-defs.h | 9 +- include/asm-powerpc/io.h | 286 +++++++++++++++++++++++++++----- include/asm-powerpc/machdep.h | 4 +- 16 files changed, 367 insertions(+), 213 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile index 600954df07a..f9ce5d798de 100644 --- a/arch/powerpc/kernel/Makefile +++ b/arch/powerpc/kernel/Makefile @@ -72,7 +72,7 @@ obj-$(CONFIG_AUDIT) += audit.o obj64-$(CONFIG_AUDIT) += compat_audit.o ifneq ($(CONFIG_PPC_INDIRECT_IO),y) -pci64-$(CONFIG_PPC64) += iomap.o +obj-y += iomap.o endif ifeq ($(CONFIG_PPC_ISERIES),y) diff --git a/arch/powerpc/kernel/io.c b/arch/powerpc/kernel/io.c index c1aa07524c2..34ae11494dd 100644 --- a/arch/powerpc/kernel/io.c +++ b/arch/powerpc/kernel/io.c @@ -117,3 +117,90 @@ void _outsl_ns(volatile u32 __iomem *port, const void *buf, long count) asm volatile("sync"); } EXPORT_SYMBOL(_outsl_ns); + +#define IO_CHECK_ALIGN(v,a) ((((unsigned long)(v)) & ((a) - 1)) == 0) + +void _memset_io(volatile void __iomem *addr, int c, unsigned long n) +{ + void *p = (void __force *)addr; + u32 lc = c; + lc |= lc << 8; + lc |= lc << 16; + + __asm__ __volatile__ ("sync" : : : "memory"); + while(n && !IO_CHECK_ALIGN(p, 4)) { + *((volatile u8 *)p) = c; + p++; + n--; + } + while(n >= 4) { + *((volatile u32 *)p) = lc; + p += 4; + n -= 4; + } + while(n) { + *((volatile u8 *)p) = c; + p++; + n--; + } + __asm__ __volatile__ ("sync" : : : "memory"); +} +EXPORT_SYMBOL(_memset_io); + +void _memcpy_fromio(void *dest, const volatile void __iomem *src, + unsigned long n) +{ + void *vsrc = (void __force *) src; + + __asm__ __volatile__ ("sync" : : : "memory"); + while(n && (!IO_CHECK_ALIGN(vsrc, 4) || !IO_CHECK_ALIGN(dest, 4))) { + *((u8 *)dest) = *((volatile u8 *)vsrc); + __asm__ __volatile__ ("eieio" : : : "memory"); + vsrc++; + dest++; + n--; + } + while(n > 4) { + *((u32 *)dest) = *((volatile u32 *)vsrc); + __asm__ __volatile__ ("eieio" : : : "memory"); + vsrc += 4; + dest += 4; + n -= 4; + } + while(n) { + *((u8 *)dest) = *((volatile u8 *)vsrc); + __asm__ __volatile__ ("eieio" : : : "memory"); + vsrc++; + dest++; + n--; + } + __asm__ __volatile__ ("sync" : : : "memory"); +} +EXPORT_SYMBOL(_memcpy_fromio); + +void _memcpy_toio(volatile void __iomem *dest, const void *src, unsigned long n) +{ + void *vdest = (void __force *) dest; + + __asm__ __volatile__ ("sync" : : : "memory"); + while(n && (!IO_CHECK_ALIGN(vdest, 4) || !IO_CHECK_ALIGN(src, 4))) { + *((volatile u8 *)vdest) = *((u8 *)src); + src++; + vdest++; + n--; + } + while(n > 4) { + *((volatile u32 *)vdest) = *((volatile u32 *)src); + src += 4; + vdest += 4; + n-=4; + } + while(n) { + *((volatile u8 *)vdest) = *((u8 *)src); + src++; + vdest++; + n--; + } + __asm__ __volatile__ ("sync" : : : "memory"); +} +EXPORT_SYMBOL(_memcpy_toio); diff --git a/arch/powerpc/kernel/iomap.c b/arch/powerpc/kernel/iomap.c index a13a93dfc65..c6811337105 100644 --- a/arch/powerpc/kernel/iomap.c +++ b/arch/powerpc/kernel/iomap.c @@ -106,7 +106,7 @@ EXPORT_SYMBOL(iowrite32_rep); void __iomem *ioport_map(unsigned long port, unsigned int len) { - return (void __iomem *) (port+pci_io_base); + return (void __iomem *) (port + _IO_BASE); } void ioport_unmap(void __iomem *addr) diff --git a/arch/powerpc/kernel/pci_32.c b/arch/powerpc/kernel/pci_32.c index 0ad101a5fc5..b08238f3050 100644 --- a/arch/powerpc/kernel/pci_32.c +++ b/arch/powerpc/kernel/pci_32.c @@ -1561,7 +1561,7 @@ static struct resource *__pci_mmap_make_offset(struct pci_dev *dev, *offset += hose->pci_mem_offset; res_bit = IORESOURCE_MEM; } else { - io_offset = hose->io_base_virt - ___IO_BASE; + io_offset = hose->io_base_virt - (void __iomem *)_IO_BASE; *offset += io_offset; res_bit = IORESOURCE_IO; } @@ -1816,7 +1816,8 @@ void pci_resource_to_user(const struct pci_dev *dev, int bar, return; if (rsrc->flags & IORESOURCE_IO) - offset = ___IO_BASE - hose->io_base_virt + hose->io_base_phys; + offset = (void __iomem *)_IO_BASE - hose->io_base_virt + + hose->io_base_phys; *start = rsrc->start + offset; *end = rsrc->end + offset; @@ -1835,35 +1836,6 @@ pci_init_resource(struct resource *res, unsigned long start, unsigned long end, res->child = NULL; } -void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long max) -{ - unsigned long start = pci_resource_start(dev, bar); - unsigned long len = pci_resource_len(dev, bar); - unsigned long flags = pci_resource_flags(dev, bar); - - if (!len) - return NULL; - if (max && len > max) - len = max; - if (flags & IORESOURCE_IO) - return ioport_map(start, len); - if (flags & IORESOURCE_MEM) - /* Not checking IORESOURCE_CACHEABLE because PPC does - * not currently distinguish between ioremap and - * ioremap_nocache. - */ - return ioremap(start, len); - /* What? */ - return NULL; -} - -void pci_iounmap(struct pci_dev *dev, void __iomem *addr) -{ - /* Nothing to do */ -} -EXPORT_SYMBOL(pci_iomap); -EXPORT_SYMBOL(pci_iounmap); - unsigned long pci_address_to_pio(phys_addr_t address) { struct pci_controller* hose = hose_head; diff --git a/arch/powerpc/kernel/rtas_pci.c b/arch/powerpc/kernel/rtas_pci.c index 03cacc25a0a..ace9f4c86e6 100644 --- a/arch/powerpc/kernel/rtas_pci.c +++ b/arch/powerpc/kernel/rtas_pci.c @@ -38,6 +38,7 @@ #include #include #include +#include /* RTAS tokens */ static int read_pci_config; diff --git a/arch/powerpc/kernel/traps.c b/arch/powerpc/kernel/traps.c index c66b4771ef4..0d4e203fa7a 100644 --- a/arch/powerpc/kernel/traps.c +++ b/arch/powerpc/kernel/traps.c @@ -53,10 +53,6 @@ #endif #include -#ifdef CONFIG_PPC64 /* XXX */ -#define _IO_BASE pci_io_base -#endif - #ifdef CONFIG_DEBUGGER int (*__debugger)(struct pt_regs *regs); int (*__debugger_ipi)(struct pt_regs *regs); @@ -241,7 +237,7 @@ void system_reset_exception(struct pt_regs *regs) */ static inline int check_io_access(struct pt_regs *regs) { -#if defined(CONFIG_PPC_PMAC) && defined(CONFIG_PPC32) +#ifdef CONFIG_PPC32 unsigned long msr = regs->msr; const struct exception_table_entry *entry; unsigned int *nip = (unsigned int *)regs->nip; @@ -274,7 +270,7 @@ static inline int check_io_access(struct pt_regs *regs) return 1; } } -#endif /* CONFIG_PPC_PMAC && CONFIG_PPC32 */ +#endif /* CONFIG_PPC32 */ return 0; } diff --git a/arch/powerpc/mm/pgtable_32.c b/arch/powerpc/mm/pgtable_32.c index 7750c442568..1891dbeeb8e 100644 --- a/arch/powerpc/mm/pgtable_32.c +++ b/arch/powerpc/mm/pgtable_32.c @@ -148,6 +148,13 @@ ioremap(phys_addr_t addr, unsigned long size) } EXPORT_SYMBOL(ioremap); +void __iomem * +ioremap_flags(phys_addr_t addr, unsigned long size, unsigned long flags) +{ + return __ioremap(addr, size, flags); +} +EXPORT_SYMBOL(ioremap_flags); + void __iomem * __ioremap(phys_addr_t addr, unsigned long size, unsigned long flags) { @@ -247,20 +254,7 @@ void iounmap(volatile void __iomem *addr) } EXPORT_SYMBOL(iounmap); -void __iomem *ioport_map(unsigned long port, unsigned int len) -{ - return (void __iomem *) (port + _IO_BASE); -} - -void ioport_unmap(void __iomem *addr) -{ - /* Nothing to do */ -} -EXPORT_SYMBOL(ioport_map); -EXPORT_SYMBOL(ioport_unmap); - -int -map_page(unsigned long va, phys_addr_t pa, int flags) +int map_page(unsigned long va, phys_addr_t pa, int flags) { pmd_t *pd; pte_t *pg; diff --git a/arch/powerpc/mm/pgtable_64.c b/arch/powerpc/mm/pgtable_64.c index e9b21846ccb..16e4ee1c231 100644 --- a/arch/powerpc/mm/pgtable_64.c +++ b/arch/powerpc/mm/pgtable_64.c @@ -113,7 +113,7 @@ static int map_io_page(unsigned long ea, unsigned long pa, int flags) } -static void __iomem * __ioremap_com(unsigned long addr, unsigned long pa, +static void __iomem * __ioremap_com(phys_addr_t addr, unsigned long pa, unsigned long ea, unsigned long size, unsigned long flags) { @@ -129,7 +129,7 @@ static void __iomem * __ioremap_com(unsigned long addr, unsigned long pa, return (void __iomem *) (ea + (addr & ~PAGE_MASK)); } -void __iomem * __ioremap(unsigned long addr, unsigned long size, +void __iomem * __ioremap(phys_addr_t addr, unsigned long size, unsigned long flags) { unsigned long pa, ea; @@ -169,7 +169,7 @@ void __iomem * __ioremap(unsigned long addr, unsigned long size, } -void __iomem * ioremap(unsigned long addr, unsigned long size) +void __iomem * ioremap(phys_addr_t addr, unsigned long size) { unsigned long flags = _PAGE_NO_CACHE | _PAGE_GUARDED; @@ -178,7 +178,7 @@ void __iomem * ioremap(unsigned long addr, unsigned long size) return __ioremap(addr, size, flags); } -void __iomem * ioremap_flags(unsigned long addr, unsigned long size, +void __iomem * ioremap_flags(phys_addr_t addr, unsigned long size, unsigned long flags) { if (ppc_md.ioremap) @@ -189,7 +189,7 @@ void __iomem * ioremap_flags(unsigned long addr, unsigned long size, #define IS_PAGE_ALIGNED(_val) ((_val) == ((_val) & PAGE_MASK)) -int __ioremap_explicit(unsigned long pa, unsigned long ea, +int __ioremap_explicit(phys_addr_t pa, unsigned long ea, unsigned long size, unsigned long flags) { struct vm_struct *area; @@ -244,7 +244,7 @@ int __ioremap_explicit(unsigned long pa, unsigned long ea, * * XXX what about calls before mem_init_done (ie python_countermeasures()) */ -void __iounmap(void __iomem *token) +void __iounmap(volatile void __iomem *token) { void *addr; @@ -256,7 +256,7 @@ void __iounmap(void __iomem *token) im_free(addr); } -void iounmap(void __iomem *token) +void iounmap(volatile void __iomem *token) { if (ppc_md.iounmap) ppc_md.iounmap(token); @@ -282,7 +282,7 @@ static int iounmap_subset_regions(unsigned long addr, unsigned long size) return 0; } -int __iounmap_explicit(void __iomem *start, unsigned long size) +int __iounmap_explicit(volatile void __iomem *start, unsigned long size) { struct vm_struct *area; unsigned long addr; diff --git a/arch/powerpc/platforms/chrp/setup.c b/arch/powerpc/platforms/chrp/setup.c index e6807d6d75b..e1f51d45598 100644 --- a/arch/powerpc/platforms/chrp/setup.c +++ b/arch/powerpc/platforms/chrp/setup.c @@ -588,7 +588,6 @@ static int __init chrp_probe(void) ISA_DMA_THRESHOLD = ~0L; DMA_MODE_READ = 0x44; DMA_MODE_WRITE = 0x48; - isa_io_base = CHRP_ISA_IO_BASE; /* default value */ return 1; } diff --git a/arch/powerpc/platforms/iseries/setup.c b/arch/powerpc/platforms/iseries/setup.c index 2f16d9330cf..0f39bdbbf91 100644 --- a/arch/powerpc/platforms/iseries/setup.c +++ b/arch/powerpc/platforms/iseries/setup.c @@ -617,13 +617,13 @@ static void iseries_dedicated_idle(void) void __init iSeries_init_IRQ(void) { } #endif -static void __iomem *iseries_ioremap(unsigned long address, unsigned long size, +static void __iomem *iseries_ioremap(phys_addr_t address, unsigned long size, unsigned long flags) { return (void __iomem *)address; } -static void iseries_iounmap(void __iomem *token) +static void iseries_iounmap(volatile void __iomem *token) { } diff --git a/arch/powerpc/platforms/powermac/setup.c b/arch/powerpc/platforms/powermac/setup.c index 4ec6a5a65f3..d949e9df41e 100644 --- a/arch/powerpc/platforms/powermac/setup.c +++ b/arch/powerpc/platforms/powermac/setup.c @@ -677,8 +677,6 @@ static int __init pmac_probe(void) #ifdef CONFIG_PPC32 /* isa_io_base gets set in pmac_pci_init */ - isa_mem_base = PMAC_ISA_MEM_BASE; - pci_dram_offset = PMAC_PCI_DRAM_OFFSET; ISA_DMA_THRESHOLD = ~0L; DMA_MODE_READ = 1; DMA_MODE_WRITE = 2; diff --git a/include/asm-powerpc/eeh.h b/include/asm-powerpc/eeh.h index 66481bbf270..b886bec6701 100644 --- a/include/asm-powerpc/eeh.h +++ b/include/asm-powerpc/eeh.h @@ -169,104 +169,19 @@ static inline u64 eeh_readq_be(const volatile void __iomem *addr) return val; } -#define EEH_CHECK_ALIGN(v,a) \ - ((((unsigned long)(v)) & ((a) - 1)) == 0) - -static inline void eeh_memset_io(volatile void __iomem *addr, int c, - unsigned long n) -{ - void *p = (void __force *)addr; - u32 lc = c; - lc |= lc << 8; - lc |= lc << 16; - - __asm__ __volatile__ ("sync" : : : "memory"); - while(n && !EEH_CHECK_ALIGN(p, 4)) { - *((volatile u8 *)p) = c; - p++; - n--; - } - while(n >= 4) { - *((volatile u32 *)p) = lc; - p += 4; - n -= 4; - } - while(n) { - *((volatile u8 *)p) = c; - p++; - n--; - } - __asm__ __volatile__ ("sync" : : : "memory"); -} -static inline void eeh_memcpy_fromio(void *dest, const volatile void __iomem *src, +static inline void eeh_memcpy_fromio(void *dest, const + volatile void __iomem *src, unsigned long n) { - void *vsrc = (void __force *) src; - void *destsave = dest; - unsigned long nsave = n; - - __asm__ __volatile__ ("sync" : : : "memory"); - while(n && (!EEH_CHECK_ALIGN(vsrc, 4) || !EEH_CHECK_ALIGN(dest, 4))) { - *((u8 *)dest) = *((volatile u8 *)vsrc); - __asm__ __volatile__ ("eieio" : : : "memory"); - vsrc++; - dest++; - n--; - } - while(n > 4) { - *((u32 *)dest) = *((volatile u32 *)vsrc); - __asm__ __volatile__ ("eieio" : : : "memory"); - vsrc += 4; - dest += 4; - n -= 4; - } - while(n) { - *((u8 *)dest) = *((volatile u8 *)vsrc); - __asm__ __volatile__ ("eieio" : : : "memory"); - vsrc++; - dest++; - n--; - } - __asm__ __volatile__ ("sync" : : : "memory"); + _memcpy_fromio(dest, src, n); /* Look for ffff's here at dest[n]. Assume that at least 4 bytes * were copied. Check all four bytes. */ - if ((nsave >= 4) && - (EEH_POSSIBLE_ERROR((*((u32 *) destsave+nsave-4)), u32))) { - eeh_check_failure(src, (*((u32 *) destsave+nsave-4))); - } + if (n >= 4 && EEH_POSSIBLE_ERROR(*((u32 *)(dest + n - 4)), u32)) + eeh_check_failure(src, *((u32 *)(dest + n - 4))); } -static inline void eeh_memcpy_toio(volatile void __iomem *dest, const void *src, - unsigned long n) -{ - void *vdest = (void __force *) dest; - - __asm__ __volatile__ ("sync" : : : "memory"); - while(n && (!EEH_CHECK_ALIGN(vdest, 4) || !EEH_CHECK_ALIGN(src, 4))) { - *((volatile u8 *)vdest) = *((u8 *)src); - src++; - vdest++; - n--; - } - while(n > 4) { - *((volatile u32 *)vdest) = *((volatile u32 *)src); - src += 4; - vdest += 4; - n-=4; - } - while(n) { - *((volatile u8 *)vdest) = *((u8 *)src); - src++; - vdest++; - n--; - } - __asm__ __volatile__ ("sync" : : : "memory"); -} - -#undef EEH_CHECK_ALIGN - /* in-string eeh macros */ static inline void eeh_readsb(const volatile void __iomem *addr, void * buf, int ns) diff --git a/include/asm-powerpc/ide.h b/include/asm-powerpc/ide.h index 60a8fc42997..0f66f0f82c3 100644 --- a/include/asm-powerpc/ide.h +++ b/include/asm-powerpc/ide.h @@ -22,17 +22,10 @@ #endif #endif -#ifdef __powerpc64__ #define __ide_mm_insw(p, a, c) readsw((void __iomem *)(p), (a), (c)) #define __ide_mm_insl(p, a, c) readsl((void __iomem *)(p), (a), (c)) #define __ide_mm_outsw(p, a, c) writesw((void __iomem *)(p), (a), (c)) #define __ide_mm_outsl(p, a, c) writesl((void __iomem *)(p), (a), (c)) -#else -#define __ide_mm_insw(p, a, c) _insw_ns((volatile u16 __iomem *)(p), (a), (c)) -#define __ide_mm_insl(p, a, c) _insl_ns((volatile u32 __iomem *)(p), (a), (c)) -#define __ide_mm_outsw(p, a, c) _outsw_ns((volatile u16 __iomem *)(p), (a), (c)) -#define __ide_mm_outsl(p, a, c) _outsl_ns((volatile u32 __iomem *)(p), (a), (c)) -#endif #ifndef __powerpc64__ #include diff --git a/include/asm-powerpc/io-defs.h b/include/asm-powerpc/io-defs.h index 5a660f1130d..03691ab6921 100644 --- a/include/asm-powerpc/io-defs.h +++ b/include/asm-powerpc/io-defs.h @@ -3,17 +3,20 @@ DEF_PCI_AC_RET(readb, u8, (const PCI_IO_ADDR addr), (addr)) DEF_PCI_AC_RET(readw, u16, (const PCI_IO_ADDR addr), (addr)) DEF_PCI_AC_RET(readl, u32, (const PCI_IO_ADDR addr), (addr)) -DEF_PCI_AC_RET(readq, u64, (const PCI_IO_ADDR addr), (addr)) DEF_PCI_AC_RET(readw_be, u16, (const PCI_IO_ADDR addr), (addr)) DEF_PCI_AC_RET(readl_be, u32, (const PCI_IO_ADDR addr), (addr)) -DEF_PCI_AC_RET(readq_be, u64, (const PCI_IO_ADDR addr), (addr)) DEF_PCI_AC_NORET(writeb, (u8 val, PCI_IO_ADDR addr), (val, addr)) DEF_PCI_AC_NORET(writew, (u16 val, PCI_IO_ADDR addr), (val, addr)) DEF_PCI_AC_NORET(writel, (u32 val, PCI_IO_ADDR addr), (val, addr)) -DEF_PCI_AC_NORET(writeq, (u64 val, PCI_IO_ADDR addr), (val, addr)) DEF_PCI_AC_NORET(writew_be, (u16 val, PCI_IO_ADDR addr), (val, addr)) DEF_PCI_AC_NORET(writel_be, (u32 val, PCI_IO_ADDR addr), (val, addr)) + +#ifdef __powerpc64__ +DEF_PCI_AC_RET(readq, u64, (const PCI_IO_ADDR addr), (addr)) +DEF_PCI_AC_RET(readq_be, u64, (const PCI_IO_ADDR addr), (addr)) +DEF_PCI_AC_NORET(writeq, (u64 val, PCI_IO_ADDR addr), (val, addr)) DEF_PCI_AC_NORET(writeq_be, (u64 val, PCI_IO_ADDR addr), (val, addr)) +#endif /* __powerpc64__ */ DEF_PCI_AC_RET(inb, u8, (unsigned long port), (port)) DEF_PCI_AC_RET(inw, u16, (unsigned long port), (port)) diff --git a/include/asm-powerpc/io.h b/include/asm-powerpc/io.h index 03e843fc143..53bff8bd39b 100644 --- a/include/asm-powerpc/io.h +++ b/include/asm-powerpc/io.h @@ -13,24 +13,51 @@ extern int check_legacy_ioport(unsigned long base_port); #define PNPBIOS_BASE 0xf000 /* only relevant for PReP */ -#ifndef CONFIG_PPC64 -#include -#else - #include #include #include -#include #include #include +#include #include +#ifdef CONFIG_PPC64 +#include +#endif + #define SIO_CONFIG_RA 0x398 #define SIO_CONFIG_RD 0x399 #define SLOW_DOWN_IO +/* 32 bits uses slightly different variables for the various IO + * bases. Most of this file only uses _IO_BASE though which we + * define properly based on the platform + */ +#ifndef CONFIG_PCI +#define _IO_BASE 0 +#define _ISA_MEM_BASE 0 +#define PCI_DRAM_OFFSET 0 +#elif defined(CONFIG_PPC32) +#define _IO_BASE isa_io_base +#define _ISA_MEM_BASE isa_mem_base +#define PCI_DRAM_OFFSET pci_dram_offset +#else +#define _IO_BASE pci_io_base +#define _ISA_MEM_BASE 0 +#define PCI_DRAM_OFFSET 0 +#endif + +extern unsigned long isa_io_base; +extern unsigned long isa_mem_base; +extern unsigned long pci_io_base; +extern unsigned long pci_dram_offset; + +#if defined(CONFIG_PPC32) && defined(CONFIG_PPC_INDIRECT_IO) +#error CONFIG_PPC_INDIRECT_IO is not yet supported on 32 bits +#endif + /* * * Low level MMIO accessors @@ -53,7 +80,11 @@ extern int check_legacy_ioport(unsigned long base_port); * */ +#ifdef CONFIG_PPC64 #define IO_SET_SYNC_FLAG() do { get_paca()->io_sync = 1; } while(0) +#else +#define IO_SET_SYNC_FLAG() +#endif #define DEF_MMIO_IN(name, type, insn) \ static inline type name(const volatile type __iomem *addr) \ @@ -86,17 +117,19 @@ static inline void name(volatile type __iomem *addr, type val) \ DEF_MMIO_IN_BE(in_8, 8, lbz); DEF_MMIO_IN_BE(in_be16, 16, lhz); DEF_MMIO_IN_BE(in_be32, 32, lwz); -DEF_MMIO_IN_BE(in_be64, 64, ld); DEF_MMIO_IN_LE(in_le16, 16, lhbrx); DEF_MMIO_IN_LE(in_le32, 32, lwbrx); DEF_MMIO_OUT_BE(out_8, 8, stb); DEF_MMIO_OUT_BE(out_be16, 16, sth); DEF_MMIO_OUT_BE(out_be32, 32, stw); -DEF_MMIO_OUT_BE(out_be64, 64, std); DEF_MMIO_OUT_LE(out_le16, 16, sthbrx); DEF_MMIO_OUT_LE(out_le32, 32, stwbrx); +#ifdef __powerpc64__ +DEF_MMIO_OUT_BE(out_be64, 64, std); +DEF_MMIO_IN_BE(in_be64, 64, ld); + /* There is no asm instructions for 64 bits reverse loads and stores */ static inline u64 in_le64(const volatile u64 __iomem *addr) { @@ -107,6 +140,7 @@ static inline void out_le64(volatile u64 __iomem *addr, u64 val) { out_be64(addr, cpu_to_le64(val)); } +#endif /* __powerpc64__ */ /* * Low level IO stream instructions are defined out of line for now @@ -126,6 +160,17 @@ extern void _outsl_ns(volatile u32 __iomem *addr, const void *buf, long count); #define _outsw _outsw_ns #define _outsl _outsl_ns + +/* + * memset_io, memcpy_toio, memcpy_fromio base implementations are out of line + */ + +extern void _memset_io(volatile void __iomem *addr, int c, unsigned long n); +extern void _memcpy_fromio(void *dest, const volatile void __iomem *src, + unsigned long n); +extern void _memcpy_toio(volatile void __iomem *dest, const void *src, + unsigned long n); + /* * * PCI and standard ISA accessors @@ -140,9 +185,6 @@ extern void _outsl_ns(volatile u32 __iomem *addr, const void *buf, long count); * of the accessors. */ -extern unsigned long isa_io_base; -extern unsigned long pci_io_base; - /* * Non ordered and non-swapping "raw" accessors @@ -160,10 +202,6 @@ static inline unsigned int __raw_readl(const volatile void __iomem *addr) { return *(volatile unsigned int __force *)addr; } -static inline unsigned long __raw_readq(const volatile void __iomem *addr) -{ - return *(volatile unsigned long __force *)addr; -} static inline void __raw_writeb(unsigned char v, volatile void __iomem *addr) { *(volatile unsigned char __force *)addr = v; @@ -176,11 +214,17 @@ static inline void __raw_writel(unsigned int v, volatile void __iomem *addr) { *(volatile unsigned int __force *)addr = v; } + +#ifdef __powerpc64__ +static inline unsigned long __raw_readq(const volatile void __iomem *addr) +{ + return *(volatile unsigned long __force *)addr; +} static inline void __raw_writeq(unsigned long v, volatile void __iomem *addr) { *(volatile unsigned long __force *)addr = v; } - +#endif /* __powerpc64__ */ /* * @@ -188,7 +232,13 @@ static inline void __raw_writeq(unsigned long v, volatile void __iomem *addr) * */ +/* + * Include the EEH definitions when EEH is enabled only so they don't get + * in the way when building for 32 bits + */ +#ifdef CONFIG_EEH #include +#endif /* Shortcut to the MMIO argument pointer */ #define PCI_IO_ADDR volatile void __iomem * @@ -196,7 +246,7 @@ static inline void __raw_writeq(unsigned long v, volatile void __iomem *addr) /* Indirect IO address tokens: * * When CONFIG_PPC_INDIRECT_IO is set, the platform can provide hooks - * on all IOs. + * on all IOs. (Note that this is all 64 bits only for now) * * To help platforms who may need to differenciate MMIO addresses in * their hooks, a bitfield is reserved for use by the platform near the @@ -241,6 +291,70 @@ do { \ #define PCI_FIX_ADDR(addr) (addr) #endif +/* + * On 32 bits, PIO operations have a recovery mechanism in case they trigger + * machine checks (which they occasionally do when probing non existing + * IO ports on some platforms, like PowerMac and 8xx). + * I always found it to be of dubious reliability and I am tempted to get + * rid of it one of these days. So if you think it's important to keep it, + * please voice up asap. We never had it for 64 bits and I do not intend + * to port it over + */ + +#ifdef CONFIG_PPC32 + +#define __do_in_asm(name, op) \ +extern __inline__ unsigned int name(unsigned int port) \ +{ \ + unsigned int x; \ + __asm__ __volatile__( \ + "sync\n" \ + "0:" op " %0,0,%1\n" \ + "1: twi 0,%0,0\n" \ + "2: isync\n" \ + "3: nop\n" \ + "4:\n" \ + ".section .fixup,\"ax\"\n" \ + "5: li %0,-1\n" \ + " b 4b\n" \ + ".previous\n" \ + ".section __ex_table,\"a\"\n" \ + " .align 2\n" \ + " .long 0b,5b\n" \ + " .long 1b,5b\n" \ + " .long 2b,5b\n" \ + " .long 3b,5b\n" \ + ".previous" \ + : "=&r" (x) \ + : "r" (port + _IO_BASE)); \ + return x; \ +} + +#define __do_out_asm(name, op) \ +extern __inline__ void name(unsigned int val, unsigned int port) \ +{ \ + __asm__ __volatile__( \ + "sync\n" \ + "0:" op " %0,0,%1\n" \ + "1: sync\n" \ + "2:\n" \ + ".section __ex_table,\"a\"\n" \ + " .align 2\n" \ + " .long 0b,2b\n" \ + " .long 1b,2b\n" \ + ".previous" \ + : : "r" (val), "r" (port + _IO_BASE)); \ +} + +__do_in_asm(_rec_inb, "lbzx") +__do_in_asm(_rec_inw, "lhbrx") +__do_in_asm(_rec_inl, "lwbrx") +__do_out_asm(_rec_outb, "stbx") +__do_out_asm(_rec_outw, "sthbrx") +__do_out_asm(_rec_outl, "stwbrx") + +#endif /* CONFIG_PPC32 */ + /* The "__do_*" operations below provide the actual "base" implementation * for each of the defined acccessor. Some of them use the out_* functions * directly, some of them still use EEH, though we might change that in the @@ -263,6 +377,8 @@ do { \ #define __do_writew_be(val, addr) out_be16(PCI_FIX_ADDR(addr), val) #define __do_writel_be(val, addr) out_be32(PCI_FIX_ADDR(addr), val) #define __do_writeq_be(val, addr) out_be64(PCI_FIX_ADDR(addr), val) + +#ifdef CONFIG_EEH #define __do_readb(addr) eeh_readb(PCI_FIX_ADDR(addr)) #define __do_readw(addr) eeh_readw(PCI_FIX_ADDR(addr)) #define __do_readl(addr) eeh_readl(PCI_FIX_ADDR(addr)) @@ -270,33 +386,64 @@ do { \ #define __do_readw_be(addr) eeh_readw_be(PCI_FIX_ADDR(addr)) #define __do_readl_be(addr) eeh_readl_be(PCI_FIX_ADDR(addr)) #define __do_readq_be(addr) eeh_readq_be(PCI_FIX_ADDR(addr)) - -#define __do_outb(val, port) writeb(val,(PCI_IO_ADDR)pci_io_base+port); -#define __do_outw(val, port) writew(val,(PCI_IO_ADDR)pci_io_base+port); -#define __do_outl(val, port) writel(val,(PCI_IO_ADDR)pci_io_base+port); -#define __do_inb(port) readb((PCI_IO_ADDR)pci_io_base + port); -#define __do_inw(port) readw((PCI_IO_ADDR)pci_io_base + port); -#define __do_inl(port) readl((PCI_IO_ADDR)pci_io_base + port); - +#else /* CONFIG_EEH */ +#define __do_readb(addr) in_8(PCI_FIX_ADDR(addr)) +#define __do_readw(addr) in_le16(PCI_FIX_ADDR(addr)) +#define __do_readl(addr) in_le32(PCI_FIX_ADDR(addr)) +#define __do_readq(addr) in_le64(PCI_FIX_ADDR(addr)) +#define __do_readw_be(addr) in_be16(PCI_FIX_ADDR(addr)) +#define __do_readl_be(addr) in_be32(PCI_FIX_ADDR(addr)) +#define __do_readq_be(addr) in_be64(PCI_FIX_ADDR(addr)) +#endif /* !defined(CONFIG_EEH) */ + +#ifdef CONFIG_PPC32 +#define __do_outb(val, port) _rec_outb(val, port) +#define __do_outw(val, port) _rec_outw(val, port) +#define __do_outl(val, port) _rec_outl(val, port) +#define __do_inb(port) _rec_inb(port) +#define __do_inw(port) _rec_inw(port) +#define __do_inl(port) _rec_inl(port) +#else /* CONFIG_PPC32 */ +#define __do_outb(val, port) writeb(val,(PCI_IO_ADDR)_IO_BASE+port); +#define __do_outw(val, port) writew(val,(PCI_IO_ADDR)_IO_BASE+port); +#define __do_outl(val, port) writel(val,(PCI_IO_ADDR)_IO_BASE+port); +#define __do_inb(port) readb((PCI_IO_ADDR)_IO_BASE + port); +#define __do_inw(port) readw((PCI_IO_ADDR)_IO_BASE + port); +#define __do_inl(port) readl((PCI_IO_ADDR)_IO_BASE + port); +#endif /* !CONFIG_PPC32 */ + +#ifdef CONFIG_EEH #define __do_readsb(a, b, n) eeh_readsb(PCI_FIX_ADDR(a), (b), (n)) #define __do_readsw(a, b, n) eeh_readsw(PCI_FIX_ADDR(a), (b), (n)) #define __do_readsl(a, b, n) eeh_readsl(PCI_FIX_ADDR(a), (b), (n)) +#else /* CONFIG_EEH */ +#define __do_readsb(a, b, n) _insb(PCI_FIX_ADDR(a), (b), (n)) +#define __do_readsw(a, b, n) _insw(PCI_FIX_ADDR(a), (b), (n)) +#define __do_readsl(a, b, n) _insl(PCI_FIX_ADDR(a), (b), (n)) +#endif /* !CONFIG_EEH */ #define __do_writesb(a, b, n) _outsb(PCI_FIX_ADDR(a),(b),(n)) #define __do_writesw(a, b, n) _outsw(PCI_FIX_ADDR(a),(b),(n)) #define __do_writesl(a, b, n) _outsl(PCI_FIX_ADDR(a),(b),(n)) -#define __do_insb(p, b, n) readsb((PCI_IO_ADDR)pci_io_base+(p), (b), (n)) -#define __do_insw(p, b, n) readsw((PCI_IO_ADDR)pci_io_base+(p), (b), (n)) -#define __do_insl(p, b, n) readsl((PCI_IO_ADDR)pci_io_base+(p), (b), (n)) -#define __do_outsb(p, b, n) writesb((PCI_IO_ADDR)pci_io_base+(p),(b),(n)) -#define __do_outsw(p, b, n) writesw((PCI_IO_ADDR)pci_io_base+(p),(b),(n)) -#define __do_outsl(p, b, n) writesl((PCI_IO_ADDR)pci_io_base+(p),(b),(n)) - -#define __do_memset_io(addr, c, n) eeh_memset_io(PCI_FIX_ADDR(addr), c, n) -#define __do_memcpy_fromio(dst, src, n) eeh_memcpy_fromio(dst, \ - PCI_FIX_ADDR(src), n) -#define __do_memcpy_toio(dst, src, n) eeh_memcpy_toio(PCI_FIX_ADDR(dst), \ - src, n) +#define __do_insb(p, b, n) readsb((PCI_IO_ADDR)_IO_BASE+(p), (b), (n)) +#define __do_insw(p, b, n) readsw((PCI_IO_ADDR)_IO_BASE+(p), (b), (n)) +#define __do_insl(p, b, n) readsl((PCI_IO_ADDR)_IO_BASE+(p), (b), (n)) +#define __do_outsb(p, b, n) writesb((PCI_IO_ADDR)_IO_BASE+(p),(b),(n)) +#define __do_outsw(p, b, n) writesw((PCI_IO_ADDR)_IO_BASE+(p),(b),(n)) +#define __do_outsl(p, b, n) writesl((PCI_IO_ADDR)_IO_BASE+(p),(b),(n)) + +#define __do_memset_io(addr, c, n) \ + _memset_io(PCI_FIX_ADDR(addr), c, n) +#define __do_memcpy_toio(dst, src, n) \ + _memcpy_toio(PCI_FIX_ADDR(dst), src, n) + +#ifdef CONFIG_EEH +#define __do_memcpy_fromio(dst, src, n) \ + eeh_memcpy_fromio(dst, PCI_FIX_ADDR(src), n) +#else /* CONFIG_EEH */ +#define __do_memcpy_fromio(dst, src, n) \ + _memcpy_fromio(dst,PCI_FIX_ADDR(src),n) +#endif /* !CONFIG_EEH */ #ifdef CONFIG_PPC_INDIRECT_IO #define DEF_PCI_HOOK(x) x @@ -343,15 +490,27 @@ static inline void name at \ /* Some drivers check for the presence of readq & writeq with * a #ifdef, so we make them happy here. */ +#ifdef __powerpc64__ #define readq readq #define writeq writeq +#endif + +#ifdef CONFIG_NOT_COHERENT_CACHE -/* Nothing to do for cache stuff x*/ +#define dma_cache_inv(_start,_size) \ + invalidate_dcache_range(_start, (_start + _size)) +#define dma_cache_wback(_start,_size) \ + clean_dcache_range(_start, (_start + _size)) +#define dma_cache_wback_inv(_start,_size) \ + flush_dcache_range(_start, (_start + _size)) + +#else /* CONFIG_NOT_COHERENT_CACHE */ #define dma_cache_inv(_start,_size) do { } while (0) #define dma_cache_wback(_start,_size) do { } while (0) #define dma_cache_wback_inv(_start,_size) do { } while (0) +#endif /* !CONFIG_NOT_COHERENT_CACHE */ /* * Convert a physical pointer to a virtual kernel pointer for /dev/mem @@ -372,6 +531,9 @@ static inline void name at \ #define readl_relaxed(addr) readl(addr) #define readq_relaxed(addr) readq(addr) +#ifdef CONFIG_PPC32 +#define mmiowb() +#else /* * Enforce synchronisation of stores vs. spin_unlock * (this does it explicitely, though our implementation of spin_unlock @@ -385,6 +547,7 @@ static inline void mmiowb(void) : "=&r" (tmp) : "i" (offsetof(struct paca_struct, io_sync)) : "memory"); } +#endif /* !CONFIG_PPC32 */ static inline void iosync(void) { @@ -453,22 +616,29 @@ static inline void iosync(void) * be hooked (but can be used by a hook on iounmap) * */ -extern void __iomem *ioremap(unsigned long address, unsigned long size); -extern void __iomem *ioremap_flags(unsigned long address, unsigned long size, +extern void __iomem *ioremap(phys_addr_t address, unsigned long size); +extern void __iomem *ioremap_flags(phys_addr_t address, unsigned long size, unsigned long flags); #define ioremap_nocache(addr, size) ioremap((addr), (size)) -extern void iounmap(void __iomem *addr); +extern void iounmap(volatile void __iomem *addr); -extern void __iomem *__ioremap(unsigned long address, unsigned long size, +extern void __iomem *__ioremap(phys_addr_t, unsigned long size, unsigned long flags); -extern void __iounmap(void __iomem *addr); +extern void __iounmap(volatile void __iomem *addr); -extern int __ioremap_explicit(unsigned long p_addr, unsigned long v_addr, +extern int __ioremap_explicit(phys_addr_t p_addr, unsigned long v_addr, unsigned long size, unsigned long flags); -extern int __iounmap_explicit(void __iomem *start, unsigned long size); +extern int __iounmap_explicit(volatile void __iomem *start, + unsigned long size); extern void __iomem * reserve_phb_iospace(unsigned long size); +/* Those are more 32 bits only functions */ +extern unsigned long iopa(unsigned long addr); +extern unsigned long mm_ptov(unsigned long addr) __attribute_const__; +extern void io_block_mapping(unsigned long virt, phys_addr_t phys, + unsigned int size, int flags); + /* * When CONFIG_PPC_INDIRECT_IO is set, we use the generic iomap implementation @@ -538,7 +708,33 @@ static inline void * phys_to_virt(unsigned long address) */ #define BIO_VMERGE_BOUNDARY 0 +/* + * 32 bits still uses virt_to_bus() for it's implementation of DMA + * mappings se we have to keep it defined here. We also have some old + * drivers (shame shame shame) that use bus_to_virt() and haven't been + * fixed yet so I need to define it here. + */ +#ifdef CONFIG_PPC32 + +static inline unsigned long virt_to_bus(volatile void * address) +{ + if (address == NULL) + return 0; + return __pa(address) + PCI_DRAM_OFFSET; +} + +static inline void * bus_to_virt(unsigned long address) +{ + if (address == 0) + return NULL; + return __va(address - PCI_DRAM_OFFSET); +} + +#define page_to_bus(page) (page_to_phys(page) + PCI_DRAM_OFFSET) + +#endif /* CONFIG_PPC32 */ + + #endif /* __KERNEL__ */ -#endif /* CONFIG_PPC64 */ #endif /* _ASM_POWERPC_IO_H */ diff --git a/include/asm-powerpc/machdep.h b/include/asm-powerpc/machdep.h index 8c1a2dfe5cc..1b04e572354 100644 --- a/include/asm-powerpc/machdep.h +++ b/include/asm-powerpc/machdep.h @@ -88,9 +88,9 @@ struct machdep_calls { void (*pci_dma_dev_setup)(struct pci_dev *dev); void (*pci_dma_bus_setup)(struct pci_bus *bus); - void __iomem * (*ioremap)(unsigned long addr, unsigned long size, + void __iomem * (*ioremap)(phys_addr_t addr, unsigned long size, unsigned long flags); - void (*iounmap)(void __iomem *token); + void (*iounmap)(volatile void __iomem *token); #endif /* CONFIG_PPC64 */ int (*probe)(void); -- cgit v1.2.3-70-g09d2 From b06a318372ba95873abfe323076bd7e115d64b67 Mon Sep 17 00:00:00 2001 From: Stephen Rothwell Date: Tue, 21 Nov 2006 14:16:13 +1100 Subject: [POWERPC] iSeries: fix irq.c for combined build Signed-off-by: Stephen Rothwell Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/irq.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/kernel/irq.c b/arch/powerpc/kernel/irq.c index eb9fc621e05..e1936952017 100644 --- a/arch/powerpc/kernel/irq.c +++ b/arch/powerpc/kernel/irq.c @@ -268,7 +268,8 @@ void do_IRQ(struct pt_regs *regs) set_irq_regs(old_regs); #ifdef CONFIG_PPC_ISERIES - if (get_lppaca()->int_dword.fields.decr_int) { + if (firmware_has_feature(FW_FEATURE_ISERIES) && + get_lppaca()->int_dword.fields.decr_int) { get_lppaca()->int_dword.fields.decr_int = 0; /* Signal a fake decrementer interrupt */ timer_interrupt(regs); -- cgit v1.2.3-70-g09d2 From ad5cb17f730ae49e494cfd680a5c62f81c3ca484 Mon Sep 17 00:00:00 2001 From: Stephen Rothwell Date: Mon, 13 Nov 2006 14:46:04 +1100 Subject: [POWERPC] iSeries: fix sysfs.c for combined build Signed-off-by: Stephen Rothwell Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/sysfs.c | 10 ++++------ 1 file changed, 4 insertions(+), 6 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/kernel/sysfs.c b/arch/powerpc/kernel/sysfs.c index cda21a27490..22123a0d541 100644 --- a/arch/powerpc/kernel/sysfs.c +++ b/arch/powerpc/kernel/sysfs.c @@ -200,10 +200,9 @@ static void register_cpu_online(unsigned int cpu) struct cpu *c = &per_cpu(cpu_devices, cpu); struct sys_device *s = &c->sysdev; -#ifndef CONFIG_PPC_ISERIES - if (cpu_has_feature(CPU_FTR_SMT)) + if (!firmware_has_feature(FW_FEATURE_ISERIES) && + cpu_has_feature(CPU_FTR_SMT)) sysdev_create_file(s, &attr_smt_snooze_delay); -#endif /* PMC stuff */ @@ -242,10 +241,9 @@ static void unregister_cpu_online(unsigned int cpu) BUG_ON(c->no_control); -#ifndef CONFIG_PPC_ISERIES - if (cpu_has_feature(CPU_FTR_SMT)) + if (!firmware_has_feature(FW_FEATURE_ISERIES) && + cpu_has_feature(CPU_FTR_SMT)) sysdev_remove_file(s, &attr_smt_snooze_delay); -#endif /* PMC stuff */ -- cgit v1.2.3-70-g09d2 From 501b6d2938fd51e85279d950a6d23d515ae22c59 Mon Sep 17 00:00:00 2001 From: Stephen Rothwell Date: Tue, 21 Nov 2006 15:10:20 +1100 Subject: [POWERPC] iSeries: fix time.c for combined build Signed-off-by: Stephen Rothwell Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/time.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/kernel/time.c b/arch/powerpc/kernel/time.c index 46a24de36fe..f6f0c6b07c4 100644 --- a/arch/powerpc/kernel/time.c +++ b/arch/powerpc/kernel/time.c @@ -631,7 +631,8 @@ void timer_interrupt(struct pt_regs * regs) calculate_steal_time(); #ifdef CONFIG_PPC_ISERIES - get_lppaca()->int_dword.fields.decr_int = 0; + if (firmware_has_feature(FW_FEATURE_ISERIES)) + get_lppaca()->int_dword.fields.decr_int = 0; #endif while ((ticks = tb_ticks_since(per_cpu(last_jiffy, cpu))) @@ -674,7 +675,7 @@ void timer_interrupt(struct pt_regs * regs) set_dec(next_dec); #ifdef CONFIG_PPC_ISERIES - if (hvlpevent_is_pending()) + if (firmware_has_feature(FW_FEATURE_ISERIES) && hvlpevent_is_pending()) process_hvlpevents(); #endif @@ -774,7 +775,7 @@ int do_settimeofday(struct timespec *tv) * settimeofday to perform this operation. */ #ifdef CONFIG_PPC_ISERIES - if (first_settimeofday) { + if (firmware_has_feature(FW_FEATURE_ISERIES) && first_settimeofday) { iSeries_tb_recal(); first_settimeofday = 0; } -- cgit v1.2.3-70-g09d2 From 1d13581d00a041797c2c14adaccd306c91f87d46 Mon Sep 17 00:00:00 2001 From: Stephen Rothwell Date: Mon, 13 Nov 2006 14:50:28 +1100 Subject: [POWERPC] iSeries: fix xmon.c for combined build Signed-off-by: Stephen Rothwell Signed-off-by: Paul Mackerras --- arch/powerpc/xmon/xmon.c | 52 +++++++++++++++++++++++++----------------------- 1 file changed, 27 insertions(+), 25 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/xmon/xmon.c b/arch/powerpc/xmon/xmon.c index 0689c084577..d66c3a17032 100644 --- a/arch/powerpc/xmon/xmon.c +++ b/arch/powerpc/xmon/xmon.c @@ -39,6 +39,7 @@ #include #include #include +#include #ifdef CONFIG_PPC64 #include @@ -1567,11 +1568,6 @@ void super_regs(void) { int cmd; unsigned long val; -#ifdef CONFIG_PPC_ISERIES - struct paca_struct *ptrPaca = NULL; - struct lppaca *ptrLpPaca = NULL; - struct ItLpRegSave *ptrLpRegSave = NULL; -#endif cmd = skipbl(); if (cmd == '\n') { @@ -1588,26 +1584,32 @@ void super_regs(void) printf("sp = "REG" sprg3= "REG"\n", sp, mfspr(SPRN_SPRG3)); printf("toc = "REG" dar = "REG"\n", toc, mfspr(SPRN_DAR)); #ifdef CONFIG_PPC_ISERIES - // Dump out relevant Paca data areas. - printf("Paca: \n"); - ptrPaca = get_paca(); - - printf(" Local Processor Control Area (LpPaca): \n"); - ptrLpPaca = ptrPaca->lppaca_ptr; - printf(" Saved Srr0=%.16lx Saved Srr1=%.16lx \n", - ptrLpPaca->saved_srr0, ptrLpPaca->saved_srr1); - printf(" Saved Gpr3=%.16lx Saved Gpr4=%.16lx \n", - ptrLpPaca->saved_gpr3, ptrLpPaca->saved_gpr4); - printf(" Saved Gpr5=%.16lx \n", ptrLpPaca->saved_gpr5); - - printf(" Local Processor Register Save Area (LpRegSave): \n"); - ptrLpRegSave = ptrPaca->reg_save_ptr; - printf(" Saved Sprg0=%.16lx Saved Sprg1=%.16lx \n", - ptrLpRegSave->xSPRG0, ptrLpRegSave->xSPRG0); - printf(" Saved Sprg2=%.16lx Saved Sprg3=%.16lx \n", - ptrLpRegSave->xSPRG2, ptrLpRegSave->xSPRG3); - printf(" Saved Msr =%.16lx Saved Nia =%.16lx \n", - ptrLpRegSave->xMSR, ptrLpRegSave->xNIA); + if (firmware_has_feature(FW_FEATURE_ISERIES)) { + struct paca_struct *ptrPaca; + struct lppaca *ptrLpPaca; + struct ItLpRegSave *ptrLpRegSave; + + /* Dump out relevant Paca data areas. */ + printf("Paca: \n"); + ptrPaca = get_paca(); + + printf(" Local Processor Control Area (LpPaca): \n"); + ptrLpPaca = ptrPaca->lppaca_ptr; + printf(" Saved Srr0=%.16lx Saved Srr1=%.16lx \n", + ptrLpPaca->saved_srr0, ptrLpPaca->saved_srr1); + printf(" Saved Gpr3=%.16lx Saved Gpr4=%.16lx \n", + ptrLpPaca->saved_gpr3, ptrLpPaca->saved_gpr4); + printf(" Saved Gpr5=%.16lx \n", ptrLpPaca->saved_gpr5); + + printf(" Local Processor Register Save Area (LpRegSave): \n"); + ptrLpRegSave = ptrPaca->reg_save_ptr; + printf(" Saved Sprg0=%.16lx Saved Sprg1=%.16lx \n", + ptrLpRegSave->xSPRG0, ptrLpRegSave->xSPRG0); + printf(" Saved Sprg2=%.16lx Saved Sprg3=%.16lx \n", + ptrLpRegSave->xSPRG2, ptrLpRegSave->xSPRG3); + printf(" Saved Msr =%.16lx Saved Nia =%.16lx \n", + ptrLpRegSave->xMSR, ptrLpRegSave->xNIA); + } #endif return; -- cgit v1.2.3-70-g09d2 From 56291e19e37cf3bb8fc701ebf3aa8ffbf59f73ef Mon Sep 17 00:00:00 2001 From: Stephen Rothwell Date: Tue, 14 Nov 2006 12:57:38 +1100 Subject: [POWERPC] iSeries: fix slb.c for combined build Signed-off-by: Stephen Rothwell Signed-off-by: Paul Mackerras --- arch/powerpc/mm/slb.c | 13 ++++++------- 1 file changed, 6 insertions(+), 7 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/mm/slb.c b/arch/powerpc/mm/slb.c index d3733912adb..224e960650a 100644 --- a/arch/powerpc/mm/slb.c +++ b/arch/powerpc/mm/slb.c @@ -23,6 +23,7 @@ #include #include #include +#include #include #ifdef DEBUG @@ -193,6 +194,7 @@ static inline void patch_slb_encoding(unsigned int *insn_addr, void slb_initialize(void) { unsigned long linear_llp, vmalloc_llp, io_llp; + unsigned long lflags, vflags; static int slb_encoding_inited; extern unsigned int *slb_miss_kernel_load_linear; extern unsigned int *slb_miss_kernel_load_io; @@ -225,11 +227,12 @@ void slb_initialize(void) #endif } + get_paca()->stab_rr = SLB_NUM_BOLTED; + /* On iSeries the bolted entries have already been set up by * the hypervisor from the lparMap data in head.S */ -#ifndef CONFIG_PPC_ISERIES - { - unsigned long lflags, vflags; + if (firmware_has_feature(FW_FEATURE_ISERIES)) + return; lflags = SLB_VSID_KERNEL | linear_llp; vflags = SLB_VSID_KERNEL | vmalloc_llp; @@ -247,8 +250,4 @@ void slb_initialize(void) * elsewhere, we'll call _switch() which will bolt in the new * one. */ asm volatile("isync":::"memory"); - } -#endif /* CONFIG_PPC_ISERIES */ - - get_paca()->stab_rr = SLB_NUM_BOLTED; } -- cgit v1.2.3-70-g09d2 From ef2b343e99e772e35f0f9d00f7db318b6629c16e Mon Sep 17 00:00:00 2001 From: Hugh Dickins Date: Fri, 10 Nov 2006 21:32:40 +0000 Subject: [POWERPC] Make soft_enabled irqs preempt safe Rewrite local_get_flags and local_irq_disable to use r13 explicitly, to avoid the risk that gcc will split get_paca()->soft_enabled into a sequence unsafe against preemption. Similar care in local_irq_restore. Signed-off-by: Hugh Dickins Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/irq.c | 57 ++++++++++++++++++++++++++++++++++++++++---- include/asm-powerpc/hw_irq.h | 20 ++++++++++++---- 2 files changed, 67 insertions(+), 10 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/kernel/irq.c b/arch/powerpc/kernel/irq.c index e1936952017..0bd8c766583 100644 --- a/arch/powerpc/kernel/irq.c +++ b/arch/powerpc/kernel/irq.c @@ -97,22 +97,69 @@ EXPORT_SYMBOL(irq_desc); int distribute_irqs = 1; +static inline unsigned long get_hard_enabled(void) +{ + unsigned long enabled; + + __asm__ __volatile__("lbz %0,%1(13)" + : "=r" (enabled) : "i" (offsetof(struct paca_struct, hard_enabled))); + + return enabled; +} + +static inline void set_soft_enabled(unsigned long enable) +{ + __asm__ __volatile__("stb %0,%1(13)" + : : "r" (enable), "i" (offsetof(struct paca_struct, soft_enabled))); +} + void local_irq_restore(unsigned long en) { - get_paca()->soft_enabled = en; + /* + * get_paca()->soft_enabled = en; + * Is it ever valid to use local_irq_restore(0) when soft_enabled is 1? + * That was allowed before, and in such a case we do need to take care + * that gcc will set soft_enabled directly via r13, not choose to use + * an intermediate register, lest we're preempted to a different cpu. + */ + set_soft_enabled(en); if (!en) return; if (firmware_has_feature(FW_FEATURE_ISERIES)) { - if (get_paca()->lppaca_ptr->int_dword.any_int) + /* + * Do we need to disable preemption here? Not really: in the + * unlikely event that we're preempted to a different cpu in + * between getting r13, loading its lppaca_ptr, and loading + * its any_int, we might call iseries_handle_interrupts without + * an interrupt pending on the new cpu, but that's no disaster, + * is it? And the business of preempting us off the old cpu + * would itself involve a local_irq_restore which handles the + * interrupt to that cpu. + * + * But use "local_paca->lppaca_ptr" instead of "get_lppaca()" + * to avoid any preemption checking added into get_paca(). + */ + if (local_paca->lppaca_ptr->int_dword.any_int) iseries_handle_interrupts(); return; } - if (get_paca()->hard_enabled) + /* + * if (get_paca()->hard_enabled) return; + * But again we need to take care that gcc gets hard_enabled directly + * via r13, not choose to use an intermediate register, lest we're + * preempted to a different cpu in between the two instructions. + */ + if (get_hard_enabled()) return; - /* need to hard-enable interrupts here */ - get_paca()->hard_enabled = en; + + /* + * Need to hard-enable interrupts here. Since currently disabled, + * no need to take further asm precautions against preemption; but + * use local_paca instead of get_paca() to avoid preemption checking. + */ + local_paca->hard_enabled = en; if ((int)mfspr(SPRN_DEC) < 0) mtspr(SPRN_DEC, 1); hard_irq_enable(); diff --git a/include/asm-powerpc/hw_irq.h b/include/asm-powerpc/hw_irq.h index c4a1ab608f6..fd3f2a20627 100644 --- a/include/asm-powerpc/hw_irq.h +++ b/include/asm-powerpc/hw_irq.h @@ -18,15 +18,25 @@ extern void timer_interrupt(struct pt_regs *); static inline unsigned long local_get_flags(void) { - return get_paca()->soft_enabled; + unsigned long flags; + + __asm__ __volatile__("lbz %0,%1(13)" + : "=r" (flags) + : "i" (offsetof(struct paca_struct, soft_enabled))); + + return flags; } static inline unsigned long local_irq_disable(void) { - unsigned long flag = get_paca()->soft_enabled; - get_paca()->soft_enabled = 0; - barrier(); - return flag; + unsigned long flags, zero; + + __asm__ __volatile__("li %1,0; lbz %0,%2(13); stb %1,%2(13)" + : "=r" (flags), "=&r" (zero) + : "i" (offsetof(struct paca_struct, soft_enabled)) + : "memory"); + + return flags; } extern void local_irq_restore(unsigned long); -- cgit v1.2.3-70-g09d2 From 5873c9bdb05e9cc68ff4c45a192032a61f705067 Mon Sep 17 00:00:00 2001 From: Zang Roy-r61911 Date: Tue, 14 Nov 2006 14:31:50 +0800 Subject: [POWERPC] Make pci_read_irq_line the default on mpc7448hpc2 board The following patch adds a tsi108/9 pci interrupt controller host. On mpc7448hpc2 board, pci_irq_fixup function is removed, which makes the pci_read_irq_line be the default pci irq fixup. Signed-off-by: Roy Zang Signed-off-by: Paul Mackerras --- arch/powerpc/boot/dts/mpc7448hpc2.dts | 44 +++++++----- arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c | 88 ++++++----------------- arch/powerpc/sysdev/tsi108_pci.c | 48 +++++++++++-- 3 files changed, 93 insertions(+), 87 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/boot/dts/mpc7448hpc2.dts b/arch/powerpc/boot/dts/mpc7448hpc2.dts index d7b985e6bd2..c4d9562cbaa 100644 --- a/arch/powerpc/boot/dts/mpc7448hpc2.dts +++ b/arch/powerpc/boot/dts/mpc7448hpc2.dts @@ -161,29 +161,41 @@ interrupt-map = < /* IDSEL 0x11 */ - 0800 0 0 1 7400 24 0 - 0800 0 0 2 7400 25 0 - 0800 0 0 3 7400 26 0 - 0800 0 0 4 7400 27 0 + 0800 0 0 1 1180 24 0 + 0800 0 0 2 1180 25 0 + 0800 0 0 3 1180 26 0 + 0800 0 0 4 1180 27 0 /* IDSEL 0x12 */ - 1000 0 0 1 7400 25 0 - 1000 0 0 2 7400 26 0 - 1000 0 0 3 7400 27 0 - 1000 0 0 4 7400 24 0 + 1000 0 0 1 1180 25 0 + 1000 0 0 2 1180 26 0 + 1000 0 0 3 1180 27 0 + 1000 0 0 4 1180 24 0 /* IDSEL 0x13 */ - 1800 0 0 1 7400 26 0 - 1800 0 0 2 7400 27 0 - 1800 0 0 3 7400 24 0 - 1800 0 0 4 7400 25 0 + 1800 0 0 1 1180 26 0 + 1800 0 0 2 1180 27 0 + 1800 0 0 3 1180 24 0 + 1800 0 0 4 1180 25 0 /* IDSEL 0x14 */ - 2000 0 0 1 7400 27 0 - 2000 0 0 2 7400 24 0 - 2000 0 0 3 7400 25 0 - 2000 0 0 4 7400 26 0 + 2000 0 0 1 1180 27 0 + 2000 0 0 2 1180 24 0 + 2000 0 0 3 1180 25 0 + 2000 0 0 4 1180 26 0 >; + router@1180 { + linux,phandle = <1180>; + clock-frequency = <0>; + interrupt-controller; + device_type = "pic-router"; + #address-cells = <0>; + #interrupt-cells = <2>; + built-in; + big-endian; + interrupts = <17 2>; + interrupt-parent = <7400>; + }; }; }; diff --git a/arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c b/arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c index c6113c39009..3fcc85f60fb 100644 --- a/arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c +++ b/arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c @@ -60,7 +60,7 @@ pci_dram_offset = MPC7448_HPC2_PCI_MEM_OFFSET; extern int tsi108_setup_pci(struct device_node *dev); extern void _nmask_and_or_msr(unsigned long nmask, unsigned long or_val); -extern void tsi108_pci_int_init(void); +extern void tsi108_pci_int_init(struct device_node *node); extern void tsi108_irq_cascade(unsigned int irq, struct irq_desc *desc); int mpc7448_hpc2_exclude_device(u_char bus, u_char devfn) @@ -71,59 +71,6 @@ int mpc7448_hpc2_exclude_device(u_char bus, u_char devfn) return PCIBIOS_SUCCESSFUL; } -/* - * find pci slot by devfn in interrupt map of OF tree - */ -u8 find_slot_by_devfn(unsigned int *interrupt_map, unsigned int devfn) -{ - int i; - unsigned int tmp; - for (i = 0; i < 4; i++){ - tmp = interrupt_map[i*4*7]; - if ((tmp >> 11) == (devfn >> 3)) - return i; - } - return i; -} - -/* - * Scans the interrupt map for pci device - */ -void __devinit mpc7448_hpc2_fixup_irq(struct pci_dev *dev) -{ - struct pci_controller *hose; - struct device_node *node; - const unsigned int *interrupt; - int busnr; - int len; - u8 slot; - u8 pin; - - /* Lookup the hose */ - busnr = dev->bus->number; - hose = pci_bus_to_hose(busnr); - if (!hose) - printk(KERN_ERR "No pci hose found\n"); - - /* Check it has an OF node associated */ - node = (struct device_node *) hose->arch_data; - if (!node) - printk(KERN_ERR "No pci node found\n"); - - interrupt = get_property(node, "interrupt-map", &len); - slot = find_slot_by_devfn(interrupt, dev->devfn); - pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &pin); - if (pin == 0 || pin > 4) - pin = 1; - pin--; - dev->irq = interrupt[slot*4*7 + pin*7 + 5]; - - pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq); - - DBG("TSI_PCI: dev->irq = 0x%x\n", dev->irq); -} -/* temporary pci irq map fixup*/ - static void __init mpc7448_hpc2_setup_arch(void) { struct device_node *cpu; @@ -186,9 +133,12 @@ static void __init mpc7448_hpc2_init_IRQ(void) { struct mpic *mpic; phys_addr_t mpic_paddr = 0; + struct device_node *tsi_pic; +#ifdef CONFIG_PCI unsigned int cascade_pci_irq; struct device_node *tsi_pci; - struct device_node *tsi_pic; + struct device_node *cascade_node = NULL; +#endif tsi_pic = of_find_node_by_type(NULL, "open-pic"); if (tsi_pic) { @@ -202,31 +152,41 @@ static void __init mpc7448_hpc2_init_IRQ(void) return; } - DBG("%s: tsi108pic phys_addr = 0x%x\n", __FUNCTION__, + DBG("%s: tsi108 pic phys_addr = 0x%x\n", __FUNCTION__, (u32) mpic_paddr); mpic = mpic_alloc(tsi_pic, mpic_paddr, MPIC_PRIMARY | MPIC_BIG_ENDIAN | MPIC_WANTS_RESET | MPIC_SPV_EOI | MPIC_NO_PTHROU_DIS | MPIC_REGSET_TSI108, - 0, /* num_sources used */ - 0, /* num_sources used */ + 24, + NR_IRQS-4, /* num_sources used */ "Tsi108_PIC"); - BUG_ON(mpic == NULL); /* XXXX */ + BUG_ON(mpic == NULL); + + mpic_assign_isu(mpic, 0, mpic_paddr + 0x100); + mpic_init(mpic); +#ifdef CONFIG_PCI tsi_pci = of_find_node_by_type(NULL, "pci"); - if (tsi_pci == 0) { + if (tsi_pci == NULL) { printk("%s: No tsi108 pci node found !\n", __FUNCTION__); return; } + cascade_node = of_find_node_by_type(NULL, "pic-router"); + if (cascade_node == NULL) { + printk("%s: No tsi108 pci cascade node found !\n", __FUNCTION__); + return; + } cascade_pci_irq = irq_of_parse_and_map(tsi_pci, 0); + DBG("%s: tsi108 cascade_pci_irq = 0x%x\n", __FUNCTION__, + (u32) cascade_pci_irq); + tsi108_pci_int_init(cascade_node); set_irq_data(cascade_pci_irq, mpic); set_irq_chained_handler(cascade_pci_irq, tsi108_irq_cascade); - - tsi108_pci_int_init(); - +#endif /* Configure MPIC outputs to CPU0 */ tsi108_write_reg(TSI108_MPIC_OFFSET + 0x30c, 0); of_node_put(tsi_pic); @@ -284,7 +244,6 @@ static int mpc7448_machine_check_exception(struct pt_regs *regs) return 1; } return 0; - } define_machine(mpc7448_hpc2){ @@ -294,7 +253,6 @@ define_machine(mpc7448_hpc2){ .init_IRQ = mpc7448_hpc2_init_IRQ, .show_cpuinfo = mpc7448_hpc2_show_cpuinfo, .get_irq = mpic_get_irq, - .pci_irq_fixup = mpc7448_hpc2_fixup_irq, .restart = mpc7448_hpc2_restart, .calibrate_decr = generic_calibrate_decr, .machine_check_exception= mpc7448_machine_check_exception, diff --git a/arch/powerpc/sysdev/tsi108_pci.c b/arch/powerpc/sysdev/tsi108_pci.c index 322f86e93de..ae249c6bbbc 100644 --- a/arch/powerpc/sysdev/tsi108_pci.c +++ b/arch/powerpc/sysdev/tsi108_pci.c @@ -3,6 +3,8 @@ * * 2004-2005 (c) Tundra Semiconductor Corp. * Author: Alex Bounine (alexandreb@tundra.com) + * Author: Roy Zang (tie-fei.zang@freescale.com) + * Add pci interrupt router host * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the Free @@ -48,6 +50,8 @@ u32 tsi108_pci_cfg_base; u32 tsi108_csr_vir_base; +static struct device_node *pci_irq_node; +static struct irq_host *pci_irq_host; extern u32 get_vir_csrbase(void); extern u32 tsi108_read_reg(u32 reg_offset); @@ -378,6 +382,38 @@ static struct irq_chip tsi108_pci_irq = { .unmask = tsi108_pci_irq_enable, }; +static int pci_irq_host_xlate(struct irq_host *h, struct device_node *ct, + u32 *intspec, unsigned int intsize, + irq_hw_number_t *out_hwirq, unsigned int *out_flags) +{ + *out_hwirq = intspec[0]; + *out_flags = IRQ_TYPE_LEVEL_HIGH; + return 0; +} + +static int pci_irq_host_map(struct irq_host *h, unsigned int virq, + irq_hw_number_t hw) +{ unsigned int irq; + DBG("%s(%d, 0x%lx)\n", __FUNCTION__, virq, hw); + if ((virq >= 1) && (virq <= 4)){ + irq = virq + IRQ_PCI_INTAD_BASE - 1; + get_irq_desc(irq)->status |= IRQ_LEVEL; + set_irq_chip(irq, &tsi108_pci_irq); + } + return 0; +} + +static int pci_irq_host_match(struct irq_host *h, struct device_node *node) +{ + return pci_irq_node == node; +} + +static struct irq_host_ops pci_irq_host_ops = { + .match = pci_irq_host_match, + .map = pci_irq_host_map, + .xlate = pci_irq_host_xlate, +}; + /* * Exported functions */ @@ -391,15 +427,15 @@ static struct irq_chip tsi108_pci_irq = { * to the MPIC. */ -void __init tsi108_pci_int_init(void) +void __init tsi108_pci_int_init(struct device_node *node) { - u_int i; - DBG("Tsi108_pci_int_init: initializing PCI interrupts\n"); - for (i = 0; i < NUM_PCI_IRQS; i++) { - irq_desc[i + IRQ_PCI_INTAD_BASE].chip = &tsi108_pci_irq; - irq_desc[i + IRQ_PCI_INTAD_BASE].status |= IRQ_LEVEL; + pci_irq_node = of_node_get(node); + pci_irq_host = irq_alloc_host(IRQ_HOST_MAP_LEGACY, 0, &pci_irq_host_ops, 0); + if (pci_irq_host == NULL) { + printk(KERN_ERR "pci_irq_host: failed to allocate irq host !\n"); + return; } init_pci_source(); -- cgit v1.2.3-70-g09d2 From 088df4d256227b3d927bb6ed57e66d138da0565c Mon Sep 17 00:00:00 2001 From: Linas Vepstas Date: Thu, 16 Nov 2006 15:41:15 -0600 Subject: [POWERPC] Wrap cpu_die() with CONFIG_HOTPLUG_CPU Per email discussion, it appears that rtas_stop_self() and pSeries_mach_cpu_die() should not be compiled if CONFIG_HOTPLUG_CPU is not defined. This patch adds #ifdefs around these bits of code. Signed-off-by: Linas Vepstas Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/rtas.c | 5 +++-- arch/powerpc/platforms/pseries/setup.c | 4 ++++ include/asm-powerpc/rtas.h | 2 -- 3 files changed, 7 insertions(+), 4 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/kernel/rtas.c b/arch/powerpc/kernel/rtas.c index 6ef80d4e38d..387ed0d9ad6 100644 --- a/arch/powerpc/kernel/rtas.c +++ b/arch/powerpc/kernel/rtas.c @@ -810,9 +810,9 @@ asmlinkage int ppc_rtas(struct rtas_args __user *uargs) return 0; } +#ifdef CONFIG_HOTPLUG_CPU /* This version can't take the spinlock, because it never returns */ - -struct rtas_args rtas_stop_self_args = { +static struct rtas_args rtas_stop_self_args = { /* The token is initialized for real in setup_system() */ .token = RTAS_UNKNOWN_SERVICE, .nargs = 0, @@ -834,6 +834,7 @@ void rtas_stop_self(void) panic("Alas, I survived.\n"); } +#endif /* * Call early during boot, before mem init or bootmem, to retrieve the RTAS diff --git a/arch/powerpc/platforms/pseries/setup.c b/arch/powerpc/platforms/pseries/setup.c index a8f3812aa38..0dc2548ca9b 100644 --- a/arch/powerpc/platforms/pseries/setup.c +++ b/arch/powerpc/platforms/pseries/setup.c @@ -347,6 +347,7 @@ static int __init pSeries_init_panel(void) } arch_initcall(pSeries_init_panel); +#ifdef CONFIG_HOTPLUG_CPU static void pSeries_mach_cpu_die(void) { local_irq_disable(); @@ -357,6 +358,9 @@ static void pSeries_mach_cpu_die(void) BUG(); for(;;); } +#else +#define pSeries_mach_cpu_die NULL +#endif static int pseries_set_dabr(unsigned long dabr) { diff --git a/include/asm-powerpc/rtas.h b/include/asm-powerpc/rtas.h index d34f9e1f242..5a0c136c041 100644 --- a/include/asm-powerpc/rtas.h +++ b/include/asm-powerpc/rtas.h @@ -54,8 +54,6 @@ struct rtas_args { rtas_arg_t *rets; /* Pointer to return values in args[]. */ }; -extern struct rtas_args rtas_stop_self_args; - struct rtas_t { unsigned long entry; /* physical address pointer */ unsigned long base; /* physical address pointer */ -- cgit v1.2.3-70-g09d2 From f79e083c2fab601a1c382282344f5a251557dbac Mon Sep 17 00:00:00 2001 From: David Gibson Date: Thu, 16 Nov 2006 15:31:32 +1100 Subject: [POWERPC] Small clarification of initrd handling This patch makes the handling of the initrd (or initramfs) in the zImage wrapper a little easier to follow. Instead of passing the initrd addresses out from prep_kernel() via the cryptic a1 and a2 parameters, use the global struct add_range, 'initrd'. prep_kernel() already passes information through the 'vmlinux' addr_range struct, so this seems like a reasonable extension. Some comments also clarify the logic with prep_kernel(): we use an initrd included in the zImage if present, otherwise we use an initrd passed in by the bootloader in the a1 and a2 parameters (yaboot, at least, uses this mechanism to pass an initrd). Signed-off-by: David Gibson Signed-off-by: Paul Mackerras --- arch/powerpc/boot/main.c | 21 ++++++++++++++------- 1 file changed, 14 insertions(+), 7 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/boot/main.c b/arch/powerpc/boot/main.c index 418497482b6..630a453e16f 100644 --- a/arch/powerpc/boot/main.c +++ b/arch/powerpc/boot/main.c @@ -169,7 +169,7 @@ static int is_elf32(void *hdr) return 1; } -static void prep_kernel(unsigned long *a1, unsigned long *a2) +static void prep_kernel(unsigned long a1, unsigned long a2) { int len; @@ -205,11 +205,14 @@ static void prep_kernel(unsigned long *a1, unsigned long *a2) } /* - * Now we try to alloc memory for the initrd (and copy it there) + * Now find the initrd + * + * First see if we have an image attached to us. If so + * allocate memory for it and copy it there. */ initrd.size = (unsigned long)(_initrd_end - _initrd_start); initrd.memsize = initrd.size; - if ( initrd.size > 0 ) { + if (initrd.size > 0) { printf("Allocating 0x%lx bytes for initrd ...\n\r", initrd.size); initrd.addr = (unsigned long)malloc((u32)initrd.size); @@ -218,8 +221,6 @@ static void prep_kernel(unsigned long *a1, unsigned long *a2) "ramdisk !\n\r"); exit(); } - *a1 = initrd.addr; - *a2 = initrd.size; printf("initial ramdisk moving 0x%lx <- 0x%lx " "(0x%lx bytes)\n\r", initrd.addr, (unsigned long)_initrd_start, initrd.size); @@ -227,6 +228,12 @@ static void prep_kernel(unsigned long *a1, unsigned long *a2) initrd.size); printf("initrd head: 0x%lx\n\r", *((unsigned long *)initrd.addr)); + } else if (a2 != 0) { + /* Otherwise, see if yaboot or another loader gave us an initrd */ + initrd.addr = a1; + initrd.memsize = initrd.size = a2; + printf("Using loader supplied initrd at 0x%lx (0x%lx bytes)\n\r", + initrd.addr, initrd.size); } /* Eventually gunzip the kernel */ @@ -307,7 +314,7 @@ void start(unsigned long a1, unsigned long a2, void *promptr, void *sp) printf("\n\rzImage starting: loaded at 0x%p (sp: 0x%p)\n\r", _start, sp); - prep_kernel(&a1, &a2); + prep_kernel(a1, a2); /* If cmdline came from zimage wrapper or if we can edit the one * in the dt, print it out and edit it, if possible. @@ -331,7 +338,7 @@ void start(unsigned long a1, unsigned long a2, void *promptr, void *sp) } else /* XXX initrd addr/size should be passed in properties */ - kentry(a1, a2, promptr); + kentry(initrd.addr, initrd.size, promptr); /* console closed so printf below may not work */ printf("Error: Linux kernel returned to zImage boot wrapper!\n\r"); -- cgit v1.2.3-70-g09d2 From 35af89eb491a0741005e474626053266e6e635b7 Mon Sep 17 00:00:00 2001 From: David Gibson Date: Tue, 21 Nov 2006 11:37:37 +1100 Subject: [POWERPC] Cleanup zImage handling of kernel entry with flat device tree This makes 2 changes to clean up the flat device tree handling logic in the zImage wrapper. First, there were two callbacks from the dt_ops structure used for producing a final flat tree to pass to the kerne: dt_ops.ft_pack() which packed the flat tree (possibly a no-op) and dt_ops.ft_addr() which retreived the address of the final blob. Since they were only ever called together, this patch combines the two into a single new callback, dt_ops.finalize(). This new callback does whatever platform-dependent things are necessary to produce a final flat device tree blob, and returns the blob's addres. Second, the current logic calls the kernel with a flat device tree if one is build into the zImage wrapper, otherwise it boots the kernel with a PROM pointer, expecting the kernel to copy the OF device tree itself. This approach precludes the possibility of the platform wrapper code building a flat device tree from whatever platform-specific information firmware provides. Thus, this patch takes the more sensible approach of invoking the kernel with a flat tree if the dt_ops.finalize callback provides one (by whatever means). So, the dt_ops.finalize callback can be NULL, or can be a function which returns NULL. In either case, the zImage wrapper logic assumes that this is a platform with OF and invokes the kernel accordingly. Signed-off-by: David Gibson Signed-off-by: Paul Mackerras --- arch/powerpc/boot/flatdevtree_misc.c | 9 ++------- arch/powerpc/boot/main.c | 15 +++++++++++---- arch/powerpc/boot/ops.h | 3 +-- 3 files changed, 14 insertions(+), 13 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/boot/flatdevtree_misc.c b/arch/powerpc/boot/flatdevtree_misc.c index c7f9adbf827..04da38fa477 100644 --- a/arch/powerpc/boot/flatdevtree_misc.c +++ b/arch/powerpc/boot/flatdevtree_misc.c @@ -33,13 +33,9 @@ static int ft_setprop(const void *phandle, const char *propname, return ft_set_prop(&cxt, phandle, propname, buf, buflen); } -static void ft_pack(void) +static unsigned long ft_finalize(void) { ft_end_tree(&cxt); -} - -static unsigned long ft_addr(void) -{ return (unsigned long)cxt.bph; } @@ -48,8 +44,7 @@ int ft_init(void *dt_blob, unsigned int max_size, unsigned int max_find_device) dt_ops.finddevice = ft_finddevice; dt_ops.getprop = ft_getprop; dt_ops.setprop = ft_setprop; - dt_ops.ft_pack = ft_pack; - dt_ops.ft_addr = ft_addr; + dt_ops.finalize = ft_finalize; return ft_open(&cxt, dt_blob, max_size, max_find_device, platform_ops.realloc); diff --git a/arch/powerpc/boot/main.c b/arch/powerpc/boot/main.c index 630a453e16f..6f6b50d238b 100644 --- a/arch/powerpc/boot/main.c +++ b/arch/powerpc/boot/main.c @@ -298,6 +298,7 @@ void start(unsigned long a1, unsigned long a2, void *promptr, void *sp) { kernel_entry_t kentry; char cmdline[COMMAND_LINE_SIZE]; + unsigned long ft_addr = 0; memset(__bss_start, 0, _end - __bss_start); memset(&platform_ops, 0, sizeof(platform_ops)); @@ -328,14 +329,20 @@ void start(unsigned long a1, unsigned long a2, void *promptr, void *sp) set_cmdline(cmdline); } + printf("Finalizing device tree..."); + if (dt_ops.finalize) + ft_addr = dt_ops.finalize(); + if (ft_addr) + printf(" flat tree at 0x%lx\n\r", ft_addr); + else + printf(" using OF tree (promptr=%p)\n\r", promptr); + if (console_ops.close) console_ops.close(); kentry = (kernel_entry_t) vmlinux.addr; - if (_dtb_end > _dtb_start) { - dt_ops.ft_pack(); - kentry(dt_ops.ft_addr(), 0, NULL); - } + if (ft_addr) + kentry(ft_addr, 0, NULL); else /* XXX initrd addr/size should be passed in properties */ kentry(initrd.addr, initrd.size, promptr); diff --git a/arch/powerpc/boot/ops.h b/arch/powerpc/boot/ops.h index 59832fb0f27..8abb6516bb7 100644 --- a/arch/powerpc/boot/ops.h +++ b/arch/powerpc/boot/ops.h @@ -35,8 +35,7 @@ struct dt_ops { const int buflen); int (*setprop)(const void *phandle, const char *name, const void *buf, const int buflen); - void (*ft_pack)(void); - unsigned long (*ft_addr)(void); + unsigned long (*finalize)(void); }; extern struct dt_ops dt_ops; -- cgit v1.2.3-70-g09d2 From 9a06c3b176976919e223844f8ed9f1acae20b433 Mon Sep 17 00:00:00 2001 From: Adrian Cox Date: Fri, 17 Nov 2006 14:35:48 +0000 Subject: [POWERPC] Fix wraparound problem in smp-tbsync on 32-bit The patch below fixes an arithmetic wrap-around issue on 32bit machines using smp-tbsync. Without this patch a timebase value over 0x000000007fffffff will hang the boot process while bringing up secondary CPUs. Signed-off-by: Adrian Cox Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/smp-tbsync.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/kernel/smp-tbsync.c b/arch/powerpc/kernel/smp-tbsync.c index de59c6c31a5..e1970f83f14 100644 --- a/arch/powerpc/kernel/smp-tbsync.c +++ b/arch/powerpc/kernel/smp-tbsync.c @@ -78,7 +78,7 @@ static int __devinit start_contest(int cmd, long offset, int num) { int i, score=0; u64 tb; - long mark; + u64 mark; tbsync->cmd = cmd; -- cgit v1.2.3-70-g09d2 From 4687522c0dba89f1f71aeb8cf08acc4e1ee87fda Mon Sep 17 00:00:00 2001 From: Grant Likely Date: Fri, 17 Nov 2006 23:12:14 -0700 Subject: [POWERPC] Don't compile arch/powerpc mpc52xx_pic driver for ARCH=ppc arch/powerpc/sysdev/mpc52xx_pic.c breaks the ppc build Signed-off-by: Grant Likely Signed-off-by: Paul Mackerras --- arch/powerpc/sysdev/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/sysdev/Makefile b/arch/powerpc/sysdev/Makefile index 8ba11ab5e61..bae874626fc 100644 --- a/arch/powerpc/sysdev/Makefile +++ b/arch/powerpc/sysdev/Makefile @@ -11,11 +11,11 @@ obj-$(CONFIG_MMIO_NVRAM) += mmio_nvram.o obj-$(CONFIG_FSL_SOC) += fsl_soc.o obj-$(CONFIG_TSI108_BRIDGE) += tsi108_pci.o tsi108_dev.o obj-$(CONFIG_QUICC_ENGINE) += qe_lib/ -obj-$(CONFIG_PPC_MPC52xx) += mpc52xx_pic.o ifeq ($(CONFIG_PPC_MERGE),y) obj-$(CONFIG_PPC_I8259) += i8259.o obj-$(CONFIG_PPC_83xx) += ipic.o +obj-$(CONFIG_PPC_MPC52xx) += mpc52xx_pic.o endif # Temporary hack until we have migrated to asm-powerpc -- cgit v1.2.3-70-g09d2 From adaa3a796282e2fa3bc48bc57bccd01ce891b8d2 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Fri, 17 Nov 2006 06:21:12 +0100 Subject: [POWERPC] setup_kcore(): Fix incorrect function name in panic() call. Signed-off-by: Geert Uytterhoeven Signed-off-by: Paul Mackerras --- arch/powerpc/mm/init_64.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/mm/init_64.c b/arch/powerpc/mm/init_64.c index 3ff374697e3..9a178549cbc 100644 --- a/arch/powerpc/mm/init_64.c +++ b/arch/powerpc/mm/init_64.c @@ -130,7 +130,7 @@ static int __init setup_kcore(void) /* GFP_ATOMIC to avoid might_sleep warnings during boot */ kcore_mem = kmalloc(sizeof(struct kcore_list), GFP_ATOMIC); if (!kcore_mem) - panic("mem_init: kmalloc failed\n"); + panic("%s: kmalloc failed\n", __FUNCTION__); kclist_add(kcore_mem, __va(base), size); } -- cgit v1.2.3-70-g09d2 From 9b5047e249f429722d0adc54cb5ef051bd3d685c Mon Sep 17 00:00:00 2001 From: Dwayne Grant McConnell Date: Mon, 20 Nov 2006 18:44:57 +0100 Subject: [POWERPC] spufs: Change %llx to 0x%llx. This patches changes /npc, /decr, /decr_status, /spu_tag_mask, /event_mask, /event_status, and /srr0 files to provide output according to the format string "0x%llx" instead of "%llx". Before this patch some files used "0x%llx" and other used "%llx" which is inconsistent and potentially confusing. A user might assume "%llx" numbers were decimal if they happened to not contain any a-f digits. This change will break any code cannot tolerate a leading 0x in the file contents. The only known users of these files are the libspe but there might also be some scripts which access these files. This risk is deemed acceptable for future consistency. Signed-off-by: Dwayne Grant McConnell Signed-off-by: Arnd Bergmann Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/cell/spufs/file.c | 13 +++++++------ 1 file changed, 7 insertions(+), 6 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/platforms/cell/spufs/file.c b/arch/powerpc/platforms/cell/spufs/file.c index 0ea2361865a..7f126270667 100644 --- a/arch/powerpc/platforms/cell/spufs/file.c +++ b/arch/powerpc/platforms/cell/spufs/file.c @@ -1391,7 +1391,8 @@ static u64 spufs_npc_get(void *data) spu_release(ctx); return ret; } -DEFINE_SIMPLE_ATTRIBUTE(spufs_npc_ops, spufs_npc_get, spufs_npc_set, "%llx\n") +DEFINE_SIMPLE_ATTRIBUTE(spufs_npc_ops, spufs_npc_get, spufs_npc_set, + "0x%llx\n") static void spufs_decr_set(void *data, u64 val) { @@ -1413,7 +1414,7 @@ static u64 spufs_decr_get(void *data) return ret; } DEFINE_SIMPLE_ATTRIBUTE(spufs_decr_ops, spufs_decr_get, spufs_decr_set, - "%llx\n") + "0x%llx\n") static void spufs_decr_status_set(void *data, u64 val) { @@ -1435,7 +1436,7 @@ static u64 spufs_decr_status_get(void *data) return ret; } DEFINE_SIMPLE_ATTRIBUTE(spufs_decr_status_ops, spufs_decr_status_get, - spufs_decr_status_set, "%llx\n") + spufs_decr_status_set, "0x%llx\n") static void spufs_spu_tag_mask_set(void *data, u64 val) { @@ -1457,7 +1458,7 @@ static u64 spufs_spu_tag_mask_get(void *data) return ret; } DEFINE_SIMPLE_ATTRIBUTE(spufs_spu_tag_mask_ops, spufs_spu_tag_mask_get, - spufs_spu_tag_mask_set, "%llx\n") + spufs_spu_tag_mask_set, "0x%llx\n") static void spufs_event_mask_set(void *data, u64 val) { @@ -1479,7 +1480,7 @@ static u64 spufs_event_mask_get(void *data) return ret; } DEFINE_SIMPLE_ATTRIBUTE(spufs_event_mask_ops, spufs_event_mask_get, - spufs_event_mask_set, "%llx\n") + spufs_event_mask_set, "0x%llx\n") static void spufs_srr0_set(void *data, u64 val) { @@ -1501,7 +1502,7 @@ static u64 spufs_srr0_get(void *data) return ret; } DEFINE_SIMPLE_ATTRIBUTE(spufs_srr0_ops, spufs_srr0_get, spufs_srr0_set, - "%llx\n") + "0x%llx\n") static u64 spufs_id_get(void *data) { -- cgit v1.2.3-70-g09d2 From b9e3bd774bb1a90fee9b90f461a51e4ba295fe6d Mon Sep 17 00:00:00 2001 From: Dwayne Grant McConnell Date: Mon, 20 Nov 2006 18:44:58 +0100 Subject: [POWERPC] spufs: Add /lslr, /dma_info and /proxydma files The /lslr file gives read access to the SPU_LSLR register in hex; 0x3fff for example The /dma_info file provides read access to the SPU Command Queue in a binary format. The /proxydma_info files provides read access access to the Proxy Command Queue in a binary format. The spu_info.h file provides data structures for interpreting the binary format of /dma_info and /proxydma_info. Signed-off-by: Dwayne Grant McConnell Signed-off-by: Arnd Bergmann Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/cell/spufs/backing_ops.c | 1 + arch/powerpc/platforms/cell/spufs/file.c | 133 +++++++++++++++++++++++- arch/powerpc/platforms/cell/spufs/spufs.h | 9 +- include/asm-powerpc/Kbuild | 1 + include/asm-powerpc/spu_info.h | 54 ++++++++++ 5 files changed, 192 insertions(+), 6 deletions(-) create mode 100644 include/asm-powerpc/spu_info.h (limited to 'arch/powerpc') diff --git a/arch/powerpc/platforms/cell/spufs/backing_ops.c b/arch/powerpc/platforms/cell/spufs/backing_ops.c index 2d22cd59d6f..21b28f61b00 100644 --- a/arch/powerpc/platforms/cell/spufs/backing_ops.c +++ b/arch/powerpc/platforms/cell/spufs/backing_ops.c @@ -36,6 +36,7 @@ #include #include #include +#include #include #include "spufs.h" diff --git a/arch/powerpc/platforms/cell/spufs/file.c b/arch/powerpc/platforms/cell/spufs/file.c index 7f126270667..5bfabffd117 100644 --- a/arch/powerpc/platforms/cell/spufs/file.c +++ b/arch/powerpc/platforms/cell/spufs/file.c @@ -32,6 +32,7 @@ #include #include #include +#include #include #include "spufs.h" @@ -1482,6 +1483,23 @@ static u64 spufs_event_mask_get(void *data) DEFINE_SIMPLE_ATTRIBUTE(spufs_event_mask_ops, spufs_event_mask_get, spufs_event_mask_set, "0x%llx\n") +static u64 spufs_event_status_get(void *data) +{ + struct spu_context *ctx = data; + struct spu_state *state = &ctx->csa; + u64 ret = 0; + u64 stat; + + spu_acquire_saved(ctx); + stat = state->spu_chnlcnt_RW[0]; + if (stat) + ret = state->spu_chnldata_RW[0]; + spu_release(ctx); + return ret; +} +DEFINE_SIMPLE_ATTRIBUTE(spufs_event_status_ops, spufs_event_status_get, + NULL, "0x%llx\n") + static void spufs_srr0_set(void *data, u64 val) { struct spu_context *ctx = data; @@ -1535,6 +1553,109 @@ static void spufs_object_id_set(void *data, u64 id) DEFINE_SIMPLE_ATTRIBUTE(spufs_object_id_ops, spufs_object_id_get, spufs_object_id_set, "0x%llx\n"); +static u64 spufs_lslr_get(void *data) +{ + struct spu_context *ctx = data; + u64 ret; + + spu_acquire_saved(ctx); + ret = ctx->csa.priv2.spu_lslr_RW; + spu_release(ctx); + + return ret; +} +DEFINE_SIMPLE_ATTRIBUTE(spufs_lslr_ops, spufs_lslr_get, NULL, "0x%llx\n") + +static int spufs_info_open(struct inode *inode, struct file *file) +{ + struct spufs_inode_info *i = SPUFS_I(inode); + struct spu_context *ctx = i->i_ctx; + file->private_data = ctx; + return 0; +} + +static ssize_t spufs_dma_info_read(struct file *file, char __user *buf, + size_t len, loff_t *pos) +{ + struct spu_context *ctx = file->private_data; + struct spu_dma_info info; + struct mfc_cq_sr *qp, *spuqp; + int i; + + if (!access_ok(VERIFY_WRITE, buf, len)) + return -EFAULT; + + spu_acquire_saved(ctx); + spin_lock(&ctx->csa.register_lock); + info.dma_info_type = ctx->csa.priv2.spu_tag_status_query_RW; + info.dma_info_mask = ctx->csa.lscsa->tag_mask.slot[0]; + info.dma_info_status = ctx->csa.spu_chnldata_RW[24]; + info.dma_info_stall_and_notify = ctx->csa.spu_chnldata_RW[25]; + info.dma_info_atomic_command_status = ctx->csa.spu_chnldata_RW[27]; + for (i = 0; i < 16; i++) { + qp = &info.dma_info_command_data[i]; + spuqp = &ctx->csa.priv2.spuq[i]; + + qp->mfc_cq_data0_RW = spuqp->mfc_cq_data0_RW; + qp->mfc_cq_data1_RW = spuqp->mfc_cq_data1_RW; + qp->mfc_cq_data2_RW = spuqp->mfc_cq_data2_RW; + qp->mfc_cq_data3_RW = spuqp->mfc_cq_data3_RW; + } + spin_unlock(&ctx->csa.register_lock); + spu_release(ctx); + + return simple_read_from_buffer(buf, len, pos, &info, + sizeof info); +} + +static struct file_operations spufs_dma_info_fops = { + .open = spufs_info_open, + .read = spufs_dma_info_read, +}; + +static ssize_t spufs_proxydma_info_read(struct file *file, char __user *buf, + size_t len, loff_t *pos) +{ + struct spu_context *ctx = file->private_data; + struct spu_proxydma_info info; + int ret = sizeof info; + struct mfc_cq_sr *qp, *puqp; + int i; + + if (len < ret) + return -EINVAL; + + if (!access_ok(VERIFY_WRITE, buf, len)) + return -EFAULT; + + spu_acquire_saved(ctx); + spin_lock(&ctx->csa.register_lock); + info.proxydma_info_type = ctx->csa.prob.dma_querytype_RW; + info.proxydma_info_mask = ctx->csa.prob.dma_querymask_RW; + info.proxydma_info_status = ctx->csa.prob.dma_tagstatus_R; + for (i = 0; i < 8; i++) { + qp = &info.proxydma_info_command_data[i]; + puqp = &ctx->csa.priv2.puq[i]; + + qp->mfc_cq_data0_RW = puqp->mfc_cq_data0_RW; + qp->mfc_cq_data1_RW = puqp->mfc_cq_data1_RW; + qp->mfc_cq_data2_RW = puqp->mfc_cq_data2_RW; + qp->mfc_cq_data3_RW = puqp->mfc_cq_data3_RW; + } + spin_unlock(&ctx->csa.register_lock); + spu_release(ctx); + + if (copy_to_user(buf, &info, sizeof info)) + ret = -EFAULT; + + return ret; +} + +static struct file_operations spufs_proxydma_info_fops = { + .open = spufs_info_open, + .read = spufs_proxydma_info_read, +}; + struct tree_descr spufs_dir_contents[] = { { "mem", &spufs_mem_fops, 0666, }, { "regs", &spufs_regs_fops, 0666, }, @@ -1548,19 +1669,23 @@ struct tree_descr spufs_dir_contents[] = { { "signal2", &spufs_signal2_fops, 0666, }, { "signal1_type", &spufs_signal1_type, 0666, }, { "signal2_type", &spufs_signal2_type, 0666, }, - { "mss", &spufs_mss_fops, 0666, }, - { "mfc", &spufs_mfc_fops, 0666, }, { "cntl", &spufs_cntl_fops, 0666, }, - { "npc", &spufs_npc_ops, 0666, }, { "fpcr", &spufs_fpcr_fops, 0666, }, + { "lslr", &spufs_lslr_ops, 0444, }, + { "mfc", &spufs_mfc_fops, 0666, }, + { "mss", &spufs_mss_fops, 0666, }, + { "npc", &spufs_npc_ops, 0666, }, + { "srr0", &spufs_srr0_ops, 0666, }, { "decr", &spufs_decr_ops, 0666, }, { "decr_status", &spufs_decr_status_ops, 0666, }, { "spu_tag_mask", &spufs_spu_tag_mask_ops, 0666, }, { "event_mask", &spufs_event_mask_ops, 0666, }, - { "srr0", &spufs_srr0_ops, 0666, }, + { "event_status", &spufs_event_status_ops, 0444, }, { "psmap", &spufs_psmap_fops, 0666, }, { "phys-id", &spufs_id_ops, 0666, }, { "object-id", &spufs_object_id_ops, 0666, }, + { "dma_info", &spufs_dma_info_fops, 0444, }, + { "proxydma_info", &spufs_proxydma_info_fops, 0444, }, {}, }; diff --git a/arch/powerpc/platforms/cell/spufs/spufs.h b/arch/powerpc/platforms/cell/spufs/spufs.h index f438f0b8525..3e7cfc24614 100644 --- a/arch/powerpc/platforms/cell/spufs/spufs.h +++ b/arch/powerpc/platforms/cell/spufs/spufs.h @@ -29,6 +29,7 @@ #include #include +#include /* The magic number for our file system */ enum { @@ -119,8 +120,12 @@ struct spu_context_ops { int (*set_mfc_query)(struct spu_context * ctx, u32 mask, u32 mode); u32 (*read_mfc_tagstatus)(struct spu_context * ctx); u32 (*get_mfc_free_elements)(struct spu_context *ctx); - int (*send_mfc_command)(struct spu_context *ctx, - struct mfc_dma_command *cmd); + int (*send_mfc_command)(struct spu_context * ctx, + struct mfc_dma_command * cmd); + void (*dma_info_read) (struct spu_context * ctx, + struct spu_dma_info * info); + void (*proxydma_info_read) (struct spu_context * ctx, + struct spu_proxydma_info * info); }; extern struct spu_context_ops spu_hw_ops; diff --git a/include/asm-powerpc/Kbuild b/include/asm-powerpc/Kbuild index 9827849953a..1e637381c11 100644 --- a/include/asm-powerpc/Kbuild +++ b/include/asm-powerpc/Kbuild @@ -17,6 +17,7 @@ header-y += ipc.h header-y += poll.h header-y += shmparam.h header-y += sockios.h +header-y += spu_info.h header-y += ucontext.h header-y += ioctl.h header-y += linkage.h diff --git a/include/asm-powerpc/spu_info.h b/include/asm-powerpc/spu_info.h new file mode 100644 index 00000000000..3545efbf989 --- /dev/null +++ b/include/asm-powerpc/spu_info.h @@ -0,0 +1,54 @@ +/* + * SPU info structures + * + * (C) Copyright 2006 IBM Corp. + * + * Author: Dwayne Grant McConnell + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef _SPU_INFO_H +#define _SPU_INFO_H + +#ifdef __KERNEL__ +#include +#include +#else +struct mfc_cq_sr { + __u64 mfc_cq_data0_RW; + __u64 mfc_cq_data1_RW; + __u64 mfc_cq_data2_RW; + __u64 mfc_cq_data3_RW; +}; +#endif /* __KERNEL__ */ + +struct spu_dma_info { + __u64 dma_info_type; + __u64 dma_info_mask; + __u64 dma_info_status; + __u64 dma_info_stall_and_notify; + __u64 dma_info_atomic_command_status; + struct mfc_cq_sr dma_info_command_data[16]; +}; + +struct spu_proxydma_info { + __u64 proxydma_info_type; + __u64 proxydma_info_mask; + __u64 proxydma_info_status; + struct mfc_cq_sr proxydma_info_command_data[8]; +}; + +#endif -- cgit v1.2.3-70-g09d2 From 1182e1d351d2a910bc0fb53c00277c62235333de Mon Sep 17 00:00:00 2001 From: Dwayne Grant McConnell Date: Mon, 20 Nov 2006 18:44:59 +0100 Subject: [POWERPC] spufs: Remove /spu_tag_mask file This patch removes the /spu_tag_mask file from spufs. The data provided by this file is also available from the /dma_info file in the dma_info_mask of the spu_dma_info struct. The file was intended to be used by gdb, but that never used it, and now it has been replaced with the more verbose dma_info file. Signed-off-by: Dwayne Grant McConnell Signed-off-by: Arnd Bergmann Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/cell/spufs/file.c | 23 ----------------------- 1 file changed, 23 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/platforms/cell/spufs/file.c b/arch/powerpc/platforms/cell/spufs/file.c index 5bfabffd117..20b2a7aed63 100644 --- a/arch/powerpc/platforms/cell/spufs/file.c +++ b/arch/powerpc/platforms/cell/spufs/file.c @@ -1439,28 +1439,6 @@ static u64 spufs_decr_status_get(void *data) DEFINE_SIMPLE_ATTRIBUTE(spufs_decr_status_ops, spufs_decr_status_get, spufs_decr_status_set, "0x%llx\n") -static void spufs_spu_tag_mask_set(void *data, u64 val) -{ - struct spu_context *ctx = data; - struct spu_lscsa *lscsa = ctx->csa.lscsa; - spu_acquire_saved(ctx); - lscsa->tag_mask.slot[0] = (u32) val; - spu_release(ctx); -} - -static u64 spufs_spu_tag_mask_get(void *data) -{ - struct spu_context *ctx = data; - struct spu_lscsa *lscsa = ctx->csa.lscsa; - u64 ret; - spu_acquire_saved(ctx); - ret = lscsa->tag_mask.slot[0]; - spu_release(ctx); - return ret; -} -DEFINE_SIMPLE_ATTRIBUTE(spufs_spu_tag_mask_ops, spufs_spu_tag_mask_get, - spufs_spu_tag_mask_set, "0x%llx\n") - static void spufs_event_mask_set(void *data, u64 val) { struct spu_context *ctx = data; @@ -1678,7 +1656,6 @@ struct tree_descr spufs_dir_contents[] = { { "srr0", &spufs_srr0_ops, 0666, }, { "decr", &spufs_decr_ops, 0666, }, { "decr_status", &spufs_decr_status_ops, 0666, }, - { "spu_tag_mask", &spufs_spu_tag_mask_ops, 0666, }, { "event_mask", &spufs_event_mask_ops, 0666, }, { "event_status", &spufs_event_status_ops, 0444, }, { "psmap", &spufs_psmap_fops, 0666, }, -- cgit v1.2.3-70-g09d2 From 69a2f00ce5d3a19a70b36f08eaf9049677277710 Mon Sep 17 00:00:00 2001 From: Dwayne Grant McConnell Date: Mon, 20 Nov 2006 18:45:00 +0100 Subject: [POWERPC] spufs: Implement /mbox_info, /ibox_info, and /wbox_info. This patch implements read only access to /mbox_info - SPU Write Outbound Mailbox /ibox_info - SPU Write Outbound Interrupt Mailbox /wbox_info - SPU Read Inbound Mailbox These files are used by gdb in order to look into the current mailbox queues without changing the contents at the same time. They are not meant for general programming use, since the access requires a context save and is therefore rather slow. It would be good to complement this patch with one that adds write support as well. Signed-off-by: Dwayne Grant McConnell Signed-off-by: Arnd Bergmann Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/cell/spufs/file.c | 90 ++++++++++++++++++++++++++++++++ 1 file changed, 90 insertions(+) (limited to 'arch/powerpc') diff --git a/arch/powerpc/platforms/cell/spufs/file.c b/arch/powerpc/platforms/cell/spufs/file.c index 20b2a7aed63..2a2dd644101 100644 --- a/arch/powerpc/platforms/cell/spufs/file.c +++ b/arch/powerpc/platforms/cell/spufs/file.c @@ -1552,6 +1552,93 @@ static int spufs_info_open(struct inode *inode, struct file *file) return 0; } +static ssize_t spufs_mbox_info_read(struct file *file, char __user *buf, + size_t len, loff_t *pos) +{ + struct spu_context *ctx = file->private_data; + u32 mbox_stat; + u32 data; + + if (!access_ok(VERIFY_WRITE, buf, len)) + return -EFAULT; + + spu_acquire_saved(ctx); + spin_lock(&ctx->csa.register_lock); + mbox_stat = ctx->csa.prob.mb_stat_R; + if (mbox_stat & 0x0000ff) { + data = ctx->csa.prob.pu_mb_R; + } + spin_unlock(&ctx->csa.register_lock); + spu_release(ctx); + + return simple_read_from_buffer(buf, len, pos, &data, sizeof data); +} + +static struct file_operations spufs_mbox_info_fops = { + .open = spufs_info_open, + .read = spufs_mbox_info_read, + .llseek = generic_file_llseek, +}; + +static ssize_t spufs_ibox_info_read(struct file *file, char __user *buf, + size_t len, loff_t *pos) +{ + struct spu_context *ctx = file->private_data; + u32 ibox_stat; + u32 data; + + if (!access_ok(VERIFY_WRITE, buf, len)) + return -EFAULT; + + spu_acquire_saved(ctx); + spin_lock(&ctx->csa.register_lock); + ibox_stat = ctx->csa.prob.mb_stat_R; + if (ibox_stat & 0xff0000) { + data = ctx->csa.priv2.puint_mb_R; + } + spin_unlock(&ctx->csa.register_lock); + spu_release(ctx); + + return simple_read_from_buffer(buf, len, pos, &data, sizeof data); +} + +static struct file_operations spufs_ibox_info_fops = { + .open = spufs_info_open, + .read = spufs_ibox_info_read, + .llseek = generic_file_llseek, +}; + +static ssize_t spufs_wbox_info_read(struct file *file, char __user *buf, + size_t len, loff_t *pos) +{ + struct spu_context *ctx = file->private_data; + int i, cnt; + u32 data[4]; + u32 wbox_stat; + + if (!access_ok(VERIFY_WRITE, buf, len)) + return -EFAULT; + + spu_acquire_saved(ctx); + spin_lock(&ctx->csa.register_lock); + wbox_stat = ctx->csa.prob.mb_stat_R; + cnt = (wbox_stat & 0x00ff00) >> 8; + for (i = 0; i < cnt; i++) { + data[i] = ctx->csa.spu_mailbox_data[i]; + } + spin_unlock(&ctx->csa.register_lock); + spu_release(ctx); + + return simple_read_from_buffer(buf, len, pos, &data, + cnt * sizeof(u32)); +} + +static struct file_operations spufs_wbox_info_fops = { + .open = spufs_info_open, + .read = spufs_wbox_info_read, + .llseek = generic_file_llseek, +}; + static ssize_t spufs_dma_info_read(struct file *file, char __user *buf, size_t len, loff_t *pos) { @@ -1661,6 +1748,9 @@ struct tree_descr spufs_dir_contents[] = { { "psmap", &spufs_psmap_fops, 0666, }, { "phys-id", &spufs_id_ops, 0666, }, { "object-id", &spufs_object_id_ops, 0666, }, + { "mbox_info", &spufs_mbox_info_fops, 0444, }, + { "ibox_info", &spufs_ibox_info_fops, 0444, }, + { "wbox_info", &spufs_wbox_info_fops, 0444, }, { "dma_info", &spufs_dma_info_fops, 0444, }, { "proxydma_info", &spufs_proxydma_info_fops, 0444, }, {}, -- cgit v1.2.3-70-g09d2 From 17f88cebc2c3aff9d90f0d49f6e0628835eddc32 Mon Sep 17 00:00:00 2001 From: Dwayne Grant McConnell Date: Mon, 20 Nov 2006 18:45:01 +0100 Subject: [POWERPC] spufs: Read from signal files only if data is there We need to check the channel count of the signal notification registers before reading them, because it can be undefined when the count is zero. In order to read count and data atomically, we read from the saved context. This patch uses spu_acquire_saved() to force a context save before a /signal1 or /signal2 read. Because of this it is no longer necessary to have backing_ops and hw_ops versions of this function so they have been removed. Regular applications should not rely on reading this register to be fast, as it's conceptually a write-only file from the PPE perspective. Signed-off-by: Dwayne Grant McConnell Signed-off-by: Arnd Bergmann Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/cell/spufs/file.c | 30 ++++++++++++++++++++++-------- arch/powerpc/platforms/cell/spufs/hw_ops.c | 12 ------------ 2 files changed, 22 insertions(+), 20 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/platforms/cell/spufs/file.c b/arch/powerpc/platforms/cell/spufs/file.c index 2a2dd644101..c0cf9ee4d45 100644 --- a/arch/powerpc/platforms/cell/spufs/file.c +++ b/arch/powerpc/platforms/cell/spufs/file.c @@ -723,19 +723,27 @@ static ssize_t spufs_signal1_read(struct file *file, char __user *buf, size_t len, loff_t *pos) { struct spu_context *ctx = file->private_data; + int ret = 0; u32 data; if (len < 4) return -EINVAL; - spu_acquire(ctx); - data = ctx->ops->signal1_read(ctx); + spu_acquire_saved(ctx); + if (ctx->csa.spu_chnlcnt_RW[3]) { + data = ctx->csa.spu_chnldata_RW[3]; + ret = 4; + } spu_release(ctx); + if (!ret) + goto out; + if (copy_to_user(buf, &data, 4)) return -EFAULT; - return 4; +out: + return ret; } static ssize_t spufs_signal1_write(struct file *file, const char __user *buf, @@ -811,21 +819,27 @@ static int spufs_signal2_open(struct inode *inode, struct file *file) static ssize_t spufs_signal2_read(struct file *file, char __user *buf, size_t len, loff_t *pos) { - struct spu_context *ctx; + struct spu_context *ctx = file->private_data; + int ret = 0; u32 data; - ctx = file->private_data; - if (len < 4) return -EINVAL; - spu_acquire(ctx); - data = ctx->ops->signal2_read(ctx); + spu_acquire_saved(ctx); + if (ctx->csa.spu_chnlcnt_RW[4]) { + data = ctx->csa.spu_chnldata_RW[4]; + ret = 4; + } spu_release(ctx); + if (!ret) + goto out; + if (copy_to_user(buf, &data, 4)) return -EFAULT; +out: return 4; } diff --git a/arch/powerpc/platforms/cell/spufs/hw_ops.c b/arch/powerpc/platforms/cell/spufs/hw_ops.c index 59c87f12da5..79c304e815a 100644 --- a/arch/powerpc/platforms/cell/spufs/hw_ops.c +++ b/arch/powerpc/platforms/cell/spufs/hw_ops.c @@ -135,21 +135,11 @@ static int spu_hw_wbox_write(struct spu_context *ctx, u32 data) return ret; } -static u32 spu_hw_signal1_read(struct spu_context *ctx) -{ - return in_be32(&ctx->spu->problem->signal_notify1); -} - static void spu_hw_signal1_write(struct spu_context *ctx, u32 data) { out_be32(&ctx->spu->problem->signal_notify1, data); } -static u32 spu_hw_signal2_read(struct spu_context *ctx) -{ - return in_be32(&ctx->spu->problem->signal_notify2); -} - static void spu_hw_signal2_write(struct spu_context *ctx, u32 data) { out_be32(&ctx->spu->problem->signal_notify2, data); @@ -294,9 +284,7 @@ struct spu_context_ops spu_hw_ops = { .mbox_stat_poll = spu_hw_mbox_stat_poll, .ibox_read = spu_hw_ibox_read, .wbox_write = spu_hw_wbox_write, - .signal1_read = spu_hw_signal1_read, .signal1_write = spu_hw_signal1_write, - .signal2_read = spu_hw_signal2_read, .signal2_write = spu_hw_signal2_write, .signal1_type_set = spu_hw_signal1_type_set, .signal1_type_get = spu_hw_signal1_type_get, -- cgit v1.2.3-70-g09d2 From 0021550c0199b2bf5e434eda0216144074537fc7 Mon Sep 17 00:00:00 2001 From: Geoff Levand Date: Mon, 20 Nov 2006 18:45:02 +0100 Subject: [POWERPC] spufs: Replace spu.nid with spu.node Replace the use of the platform specific variable spu.nid with the platform independednt variable spu.node. Signed-off-by: Geoff Levand Signed-off-by: Arnd Bergmann Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/cell/spu_base.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/platforms/cell/spu_base.c b/arch/powerpc/platforms/cell/spu_base.c index d5aeb3c6dd4..56ff8b36103 100644 --- a/arch/powerpc/platforms/cell/spu_base.c +++ b/arch/powerpc/platforms/cell/spu_base.c @@ -835,14 +835,14 @@ static int spu_create_sysdev(struct spu *spu) return ret; } - sysfs_add_device_to_node(&spu->sysdev, spu->nid); + sysfs_add_device_to_node(&spu->sysdev, spu->node); return 0; } static void spu_destroy_sysdev(struct spu *spu) { - sysfs_remove_device_from_node(&spu->sysdev, spu->nid); + sysfs_remove_device_from_node(&spu->sysdev, spu->node); sysdev_unregister(&spu->sysdev); } -- cgit v1.2.3-70-g09d2 From 453d9f72a91d798c3e3c4b4bed26210926dfb57b Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Mon, 20 Nov 2006 18:45:03 +0100 Subject: [POWERPC] spufs: Return correct event for data storage interrupt When we attempt an MFC DMA to an unmapped address, the event returned from spu_run should be SPE_EVENT_SPE_DATA_STORAGE, not SPE_EVENT_INVALID_DMA. Signed-off-by: Arnd Bergmann Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/cell/spu_base.c | 2 +- arch/powerpc/platforms/cell/spufs/run.c | 1 + 2 files changed, 2 insertions(+), 1 deletion(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/platforms/cell/spu_base.c b/arch/powerpc/platforms/cell/spu_base.c index 56ff8b36103..d4f4f396288 100644 --- a/arch/powerpc/platforms/cell/spu_base.c +++ b/arch/powerpc/platforms/cell/spu_base.c @@ -507,7 +507,7 @@ int spu_irq_class_1_bottom(struct spu *spu) if (!error) { spu_restart_dma(spu); } else { - __spu_trap_invalid_dma(spu); + spu->dma_callback(spu, SPE_EVENT_SPE_DATA_STORAGE); } return ret; } diff --git a/arch/powerpc/platforms/cell/spufs/run.c b/arch/powerpc/platforms/cell/spufs/run.c index a4a0080c223..88a41d83a79 100644 --- a/arch/powerpc/platforms/cell/spufs/run.c +++ b/arch/powerpc/platforms/cell/spufs/run.c @@ -26,6 +26,7 @@ void spufs_dma_callback(struct spu *spu, int type) } else { switch (type) { case SPE_EVENT_DMA_ALIGNMENT: + case SPE_EVENT_SPE_DATA_STORAGE: case SPE_EVENT_INVALID_DMA: force_sig(SIGBUS, /* info, */ current); break; -- cgit v1.2.3-70-g09d2 From 2ebb2477f9a61b436dd22b75189857df1a77e585 Mon Sep 17 00:00:00 2001 From: Masato Noguchi Date: Mon, 20 Nov 2006 18:45:04 +0100 Subject: [POWERPC] spufs: Fix missing stop-and-signal When there is pending signals, current spufs_run_spu() always returns -ERESTARTSYS and it is called again automatically. But, if spe already stopped by stop-and-signal or halt instruction, returning -ERESTARTSYS makes stop-and-signal/halt lost and spu run over the end-point. For your convenience, I attached a sample code to restage this bug. If there is no bug, printed NPC will be 0x4000. Signed-off-by: Masato Noguchi Signed-off-by: Arnd Bergmann Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/cell/spufs/run.c | 28 ++++++++++++++++++---------- 1 file changed, 18 insertions(+), 10 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/platforms/cell/spufs/run.c b/arch/powerpc/platforms/cell/spufs/run.c index 88a41d83a79..c88fd7f9ea7 100644 --- a/arch/powerpc/platforms/cell/spufs/run.c +++ b/arch/powerpc/platforms/cell/spufs/run.c @@ -79,13 +79,7 @@ static inline int spu_run_fini(struct spu_context *ctx, u32 * npc, if (signal_pending(current)) ret = -ERESTARTSYS; - if (unlikely(current->ptrace & PT_PTRACED)) { - if ((*status & SPU_STATUS_STOPPED_BY_STOP) - && (*status >> SPU_STOP_STATUS_SHIFT) == 0x3fff) { - force_sig(SIGTRAP, current); - ret = -ERESTARTSYS; - } - } + return ret; } @@ -232,7 +226,7 @@ long spufs_run_spu(struct file *file, struct spu_context *ctx, if (unlikely(ctx->state != SPU_STATE_RUNNABLE)) { ret = spu_reacquire_runnable(ctx, npc, &status); if (ret) - goto out; + goto out2; continue; } ret = spu_process_events(ctx); @@ -242,10 +236,24 @@ long spufs_run_spu(struct file *file, struct spu_context *ctx, ctx->ops->runcntl_stop(ctx); ret = spu_run_fini(ctx, npc, &status); - if (!ret) - ret = status; spu_yield(ctx); +out2: + if ((ret == 0) || + ((ret == -ERESTARTSYS) && + ((status & SPU_STATUS_STOPPED_BY_HALT) || + ((status & SPU_STATUS_STOPPED_BY_STOP) && + (status >> SPU_STOP_STATUS_SHIFT != 0x2104))))) + ret = status; + + if (unlikely(current->ptrace & PT_PTRACED)) { + if ((status & SPU_STATUS_STOPPED_BY_STOP) + && (status >> SPU_STOP_STATUS_SHIFT) == 0x3fff) { + force_sig(SIGTRAP, current); + ret = -ERESTARTSYS; + } + } + out: *event = ctx->event_return; up(&ctx->run_sema); -- cgit v1.2.3-70-g09d2 From 5c3ecd659bd20cda214a402a3132c790cc886cd2 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Mon, 20 Nov 2006 18:45:05 +0100 Subject: [POWERPC] spufs: Avoid user-triggered oops in ptrace When one of the spufs files is mapped into a process address space, regular users can use ptrace to attempt accessing them with access_process_vm(). With the way that the mappings currently work, this likely causes an oops. Setting the vm_flags to VM_IO makes sure that ptrace can not access them but returns an error code. This is not the perfect solution in case of the local store mapping, but it fixes the oops in a well-defined way. Also remove leftover VM_RESERVED flags in spufs. The VM_RESERVED flag is on it's way out and not checked by the memory managment code anymore. Signed-off-by: Arnd Bergmann Signed-off-by: Christoph Hellwig Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/cell/spufs/file.c | 15 +++++++-------- 1 file changed, 7 insertions(+), 8 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/platforms/cell/spufs/file.c b/arch/powerpc/platforms/cell/spufs/file.c index c0cf9ee4d45..55d7e0f4bb3 100644 --- a/arch/powerpc/platforms/cell/spufs/file.c +++ b/arch/powerpc/platforms/cell/spufs/file.c @@ -132,7 +132,7 @@ spufs_mem_mmap(struct file *file, struct vm_area_struct *vma) if (!(vma->vm_flags & VM_SHARED)) return -EINVAL; - /* FIXME: */ + vma->vm_flags |= VM_IO; vma->vm_page_prot = __pgprot(pgprot_val(vma->vm_page_prot) | _PAGE_NO_CACHE); @@ -201,7 +201,7 @@ static int spufs_cntl_mmap(struct file *file, struct vm_area_struct *vma) if (!(vma->vm_flags & VM_SHARED)) return -EINVAL; - vma->vm_flags |= VM_RESERVED; + vma->vm_flags |= VM_IO; vma->vm_page_prot = __pgprot(pgprot_val(vma->vm_page_prot) | _PAGE_NO_CACHE | _PAGE_GUARDED); @@ -791,7 +791,7 @@ static int spufs_signal1_mmap(struct file *file, struct vm_area_struct *vma) if (!(vma->vm_flags & VM_SHARED)) return -EINVAL; - vma->vm_flags |= VM_RESERVED; + vma->vm_flags |= VM_IO; vma->vm_page_prot = __pgprot(pgprot_val(vma->vm_page_prot) | _PAGE_NO_CACHE | _PAGE_GUARDED); @@ -889,8 +889,7 @@ static int spufs_signal2_mmap(struct file *file, struct vm_area_struct *vma) if (!(vma->vm_flags & VM_SHARED)) return -EINVAL; - /* FIXME: */ - vma->vm_flags |= VM_RESERVED; + vma->vm_flags |= VM_IO; vma->vm_page_prot = __pgprot(pgprot_val(vma->vm_page_prot) | _PAGE_NO_CACHE | _PAGE_GUARDED); @@ -973,7 +972,7 @@ static int spufs_mss_mmap(struct file *file, struct vm_area_struct *vma) if (!(vma->vm_flags & VM_SHARED)) return -EINVAL; - vma->vm_flags |= VM_RESERVED; + vma->vm_flags |= VM_IO; vma->vm_page_prot = __pgprot(pgprot_val(vma->vm_page_prot) | _PAGE_NO_CACHE | _PAGE_GUARDED); @@ -1015,7 +1014,7 @@ static int spufs_psmap_mmap(struct file *file, struct vm_area_struct *vma) if (!(vma->vm_flags & VM_SHARED)) return -EINVAL; - vma->vm_flags |= VM_RESERVED; + vma->vm_flags |= VM_IO; vma->vm_page_prot = __pgprot(pgprot_val(vma->vm_page_prot) | _PAGE_NO_CACHE | _PAGE_GUARDED); @@ -1056,7 +1055,7 @@ static int spufs_mfc_mmap(struct file *file, struct vm_area_struct *vma) if (!(vma->vm_flags & VM_SHARED)) return -EINVAL; - vma->vm_flags |= VM_RESERVED; + vma->vm_flags |= VM_IO; vma->vm_page_prot = __pgprot(pgprot_val(vma->vm_page_prot) | _PAGE_NO_CACHE | _PAGE_GUARDED); -- cgit v1.2.3-70-g09d2 From 932f535dd4c83dc3eb631c2cee1dfd6ae289b88c Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Mon, 20 Nov 2006 18:45:06 +0100 Subject: [POWERPC] spufs: Always map local store non-guarded When fixing spufs to map the 'mem' file backing store cacheable, I incorrectly set the physical mapping to use both cache-inhibited and guarded mapping, which resulted in a serious performance degradation. Debugged-by: Michael Ellerman Signed-off-by: Arnd Bergmann Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/cell/spufs/file.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/platforms/cell/spufs/file.c b/arch/powerpc/platforms/cell/spufs/file.c index 55d7e0f4bb3..1c1af71d19c 100644 --- a/arch/powerpc/platforms/cell/spufs/file.c +++ b/arch/powerpc/platforms/cell/spufs/file.c @@ -105,11 +105,11 @@ spufs_mem_mmap_nopage(struct vm_area_struct *vma, if (ctx->state == SPU_STATE_SAVED) { vma->vm_page_prot = __pgprot(pgprot_val(vma->vm_page_prot) - & ~(_PAGE_NO_CACHE | _PAGE_GUARDED)); + & ~_PAGE_NO_CACHE); page = vmalloc_to_page(ctx->csa.lscsa->ls + offset); } else { vma->vm_page_prot = __pgprot(pgprot_val(vma->vm_page_prot) - | _PAGE_NO_CACHE | _PAGE_GUARDED); + | _PAGE_NO_CACHE); page = pfn_to_page((ctx->spu->local_store_phys + offset) >> PAGE_SHIFT); } -- cgit v1.2.3-70-g09d2 From 3692dc66149dc17cd82ec785a06478322c0eddff Mon Sep 17 00:00:00 2001 From: Masato Noguchi Date: Mon, 20 Nov 2006 18:45:07 +0100 Subject: [POWERPC] spufs: Fix return value of spufs_mfc_write This patch changes spufs_mfc_write() to return correct size instead of 0. Signed-off-by: Masato Noguchi Signed-off-by: Arnd Bergmann Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/cell/spufs/file.c | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/powerpc') diff --git a/arch/powerpc/platforms/cell/spufs/file.c b/arch/powerpc/platforms/cell/spufs/file.c index 1c1af71d19c..e6667530332 100644 --- a/arch/powerpc/platforms/cell/spufs/file.c +++ b/arch/powerpc/platforms/cell/spufs/file.c @@ -1279,6 +1279,7 @@ static ssize_t spufs_mfc_write(struct file *file, const char __user *buffer, goto out; ctx->tagwait |= 1 << cmd.tag; + ret = size; out: return ret; -- cgit v1.2.3-70-g09d2 From ee2d7340cbf3b123e1c3b7454f3e2b7e65d33bb2 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Mon, 20 Nov 2006 18:45:08 +0100 Subject: [POWERPC] spufs: Use SPU master control to prevent wild SPU execution When the user changes the runcontrol register, an SPU might be running without a process being attached to it and waiting for events. In order to prevent this, make sure we always disable the priv1 master control when we're not inside of spu_run. Signed-off-by: Arnd Bergmann Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/cell/spufs/backing_ops.c | 24 ++++++++++++-- arch/powerpc/platforms/cell/spufs/context.c | 42 ++++++++++++------------- arch/powerpc/platforms/cell/spufs/hw_ops.c | 28 ++++++++++++----- arch/powerpc/platforms/cell/spufs/inode.c | 15 +++++++-- arch/powerpc/platforms/cell/spufs/run.c | 3 +- arch/powerpc/platforms/cell/spufs/spufs.h | 3 +- 6 files changed, 79 insertions(+), 36 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/platforms/cell/spufs/backing_ops.c b/arch/powerpc/platforms/cell/spufs/backing_ops.c index 21b28f61b00..4a8e998c6be 100644 --- a/arch/powerpc/platforms/cell/spufs/backing_ops.c +++ b/arch/powerpc/platforms/cell/spufs/backing_ops.c @@ -280,9 +280,26 @@ static void spu_backing_runcntl_write(struct spu_context *ctx, u32 val) spin_unlock(&ctx->csa.register_lock); } -static void spu_backing_runcntl_stop(struct spu_context *ctx) +static void spu_backing_master_start(struct spu_context *ctx) { - spu_backing_runcntl_write(ctx, SPU_RUNCNTL_STOP); + struct spu_state *csa = &ctx->csa; + u64 sr1; + + spin_lock(&csa->register_lock); + sr1 = csa->priv1.mfc_sr1_RW | MFC_STATE1_MASTER_RUN_CONTROL_MASK; + csa->priv1.mfc_sr1_RW = sr1; + spin_unlock(&csa->register_lock); +} + +static void spu_backing_master_stop(struct spu_context *ctx) +{ + struct spu_state *csa = &ctx->csa; + u64 sr1; + + spin_lock(&csa->register_lock); + sr1 = csa->priv1.mfc_sr1_RW & ~MFC_STATE1_MASTER_RUN_CONTROL_MASK; + csa->priv1.mfc_sr1_RW = sr1; + spin_unlock(&csa->register_lock); } static int spu_backing_set_mfc_query(struct spu_context * ctx, u32 mask, @@ -347,7 +364,8 @@ struct spu_context_ops spu_backing_ops = { .status_read = spu_backing_status_read, .get_ls = spu_backing_get_ls, .runcntl_write = spu_backing_runcntl_write, - .runcntl_stop = spu_backing_runcntl_stop, + .master_start = spu_backing_master_start, + .master_stop = spu_backing_master_stop, .set_mfc_query = spu_backing_set_mfc_query, .read_mfc_tagstatus = spu_backing_read_mfc_tagstatus, .get_mfc_free_elements = spu_backing_get_mfc_free_elements, diff --git a/arch/powerpc/platforms/cell/spufs/context.c b/arch/powerpc/platforms/cell/spufs/context.c index 48eb050bcf4..0870009f56d 100644 --- a/arch/powerpc/platforms/cell/spufs/context.c +++ b/arch/powerpc/platforms/cell/spufs/context.c @@ -122,29 +122,29 @@ void spu_unmap_mappings(struct spu_context *ctx) int spu_acquire_exclusive(struct spu_context *ctx) { - int ret = 0; - - down_write(&ctx->state_sema); - /* ctx is about to be freed, can't acquire any more */ - if (!ctx->owner) { - ret = -EINVAL; - goto out; - } - - if (ctx->state == SPU_STATE_SAVED) { - ret = spu_activate(ctx, 0); - if (ret) - goto out; - ctx->state = SPU_STATE_RUNNABLE; - } else { - /* We need to exclude userspace access to the context. */ - spu_unmap_mappings(ctx); - } + int ret = 0; + + down_write(&ctx->state_sema); + /* ctx is about to be freed, can't acquire any more */ + if (!ctx->owner) { + ret = -EINVAL; + goto out; + } + + if (ctx->state == SPU_STATE_SAVED) { + ret = spu_activate(ctx, 0); + if (ret) + goto out; + ctx->state = SPU_STATE_RUNNABLE; + } else { + /* We need to exclude userspace access to the context. */ + spu_unmap_mappings(ctx); + } out: - if (ret) - up_write(&ctx->state_sema); - return ret; + if (ret) + up_write(&ctx->state_sema); + return ret; } int spu_acquire_runnable(struct spu_context *ctx) diff --git a/arch/powerpc/platforms/cell/spufs/hw_ops.c b/arch/powerpc/platforms/cell/spufs/hw_ops.c index 79c304e815a..69fc342e063 100644 --- a/arch/powerpc/platforms/cell/spufs/hw_ops.c +++ b/arch/powerpc/platforms/cell/spufs/hw_ops.c @@ -216,13 +216,26 @@ static void spu_hw_runcntl_write(struct spu_context *ctx, u32 val) spin_unlock_irq(&ctx->spu->register_lock); } -static void spu_hw_runcntl_stop(struct spu_context *ctx) +static void spu_hw_master_start(struct spu_context *ctx) { - spin_lock_irq(&ctx->spu->register_lock); - out_be32(&ctx->spu->problem->spu_runcntl_RW, SPU_RUNCNTL_STOP); - while (in_be32(&ctx->spu->problem->spu_status_R) & SPU_STATUS_RUNNING) - cpu_relax(); - spin_unlock_irq(&ctx->spu->register_lock); + struct spu *spu = ctx->spu; + u64 sr1; + + spin_lock_irq(&spu->register_lock); + sr1 = spu_mfc_sr1_get(spu) | MFC_STATE1_MASTER_RUN_CONTROL_MASK; + spu_mfc_sr1_set(spu, sr1); + spin_unlock_irq(&spu->register_lock); +} + +static void spu_hw_master_stop(struct spu_context *ctx) +{ + struct spu *spu = ctx->spu; + u64 sr1; + + spin_lock_irq(&spu->register_lock); + sr1 = spu_mfc_sr1_get(spu) & ~MFC_STATE1_MASTER_RUN_CONTROL_MASK; + spu_mfc_sr1_set(spu, sr1); + spin_unlock_irq(&spu->register_lock); } static int spu_hw_set_mfc_query(struct spu_context * ctx, u32 mask, u32 mode) @@ -295,7 +308,8 @@ struct spu_context_ops spu_hw_ops = { .status_read = spu_hw_status_read, .get_ls = spu_hw_get_ls, .runcntl_write = spu_hw_runcntl_write, - .runcntl_stop = spu_hw_runcntl_stop, + .master_start = spu_hw_master_start, + .master_stop = spu_hw_master_stop, .set_mfc_query = spu_hw_set_mfc_query, .read_mfc_tagstatus = spu_hw_read_mfc_tagstatus, .get_mfc_free_elements = spu_hw_get_mfc_free_elements, diff --git a/arch/powerpc/platforms/cell/spufs/inode.c b/arch/powerpc/platforms/cell/spufs/inode.c index 9e457be140e..1fbcc536924 100644 --- a/arch/powerpc/platforms/cell/spufs/inode.c +++ b/arch/powerpc/platforms/cell/spufs/inode.c @@ -248,8 +248,13 @@ static int spu_setup_isolated(struct spu_context *ctx) if (!isolated_loader) return -ENODEV; - if ((ret = spu_acquire_exclusive(ctx)) != 0) - return ret; + /* prevent concurrent operation with spu_run */ + down(&ctx->run_sema); + ctx->ops->master_start(ctx); + + ret = spu_acquire_exclusive(ctx); + if (ret) + goto out; mfc_cntl = &ctx->spu->priv2->mfc_control_RW; @@ -315,12 +320,14 @@ out_drop_priv: out_unlock: spu_release_exclusive(ctx); +out: + ctx->ops->master_stop(ctx); + up(&ctx->run_sema); return ret; } int spu_recycle_isolated(struct spu_context *ctx) { - ctx->ops->runcntl_stop(ctx); return spu_setup_isolated(ctx); } @@ -435,6 +442,8 @@ out: if (ret >= 0 && (flags & SPU_CREATE_ISOLATE)) { int setup_err = spu_setup_isolated( SPUFS_I(dentry->d_inode)->i_ctx); + /* FIXME: clean up context again on failure to avoid + leak. */ if (setup_err) ret = setup_err; } diff --git a/arch/powerpc/platforms/cell/spufs/run.c b/arch/powerpc/platforms/cell/spufs/run.c index c88fd7f9ea7..212b9c2f04a 100644 --- a/arch/powerpc/platforms/cell/spufs/run.c +++ b/arch/powerpc/platforms/cell/spufs/run.c @@ -207,6 +207,7 @@ long spufs_run_spu(struct file *file, struct spu_context *ctx, if (down_interruptible(&ctx->run_sema)) return -ERESTARTSYS; + ctx->ops->master_start(ctx); ctx->event_return = 0; ret = spu_run_init(ctx, npc); if (ret) @@ -234,7 +235,7 @@ long spufs_run_spu(struct file *file, struct spu_context *ctx, } while (!ret && !(status & (SPU_STATUS_STOPPED_BY_STOP | SPU_STATUS_STOPPED_BY_HALT))); - ctx->ops->runcntl_stop(ctx); + ctx->ops->master_stop(ctx); ret = spu_run_fini(ctx, npc, &status); spu_yield(ctx); diff --git a/arch/powerpc/platforms/cell/spufs/spufs.h b/arch/powerpc/platforms/cell/spufs/spufs.h index 3e7cfc24614..135fbb53d8e 100644 --- a/arch/powerpc/platforms/cell/spufs/spufs.h +++ b/arch/powerpc/platforms/cell/spufs/spufs.h @@ -116,7 +116,8 @@ struct spu_context_ops { u32(*status_read) (struct spu_context * ctx); char*(*get_ls) (struct spu_context * ctx); void (*runcntl_write) (struct spu_context * ctx, u32 data); - void (*runcntl_stop) (struct spu_context * ctx); + void (*master_start) (struct spu_context * ctx); + void (*master_stop) (struct spu_context * ctx); int (*set_mfc_query)(struct spu_context * ctx, u32 mask, u32 mode); u32 (*read_mfc_tagstatus)(struct spu_context * ctx); u32 (*get_mfc_free_elements)(struct spu_context *ctx); -- cgit v1.2.3-70-g09d2 From 3960c260204bc33404a6e54e9dcd44f1f83bc701 Mon Sep 17 00:00:00 2001 From: Jeremy Kerr Date: Mon, 20 Nov 2006 18:45:09 +0100 Subject: [POWERPC] spufs: Add runcntrl read accessors This change adds a read accessor for the SPE problem-state run control register. This is required for for applying (userspace) changes made to the run control register while the SPE is stopped - simply asserting the master run control bit is not sufficient. My next patch for isolated-mode setup requires this. Signed-off-by: Jeremy Kerr Signed-off-by: Arnd Bergmann Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/cell/spufs/backing_ops.c | 6 ++++++ arch/powerpc/platforms/cell/spufs/hw_ops.c | 6 ++++++ arch/powerpc/platforms/cell/spufs/spufs.h | 1 + 3 files changed, 13 insertions(+) (limited to 'arch/powerpc') diff --git a/arch/powerpc/platforms/cell/spufs/backing_ops.c b/arch/powerpc/platforms/cell/spufs/backing_ops.c index 4a8e998c6be..1898f0d3a8b 100644 --- a/arch/powerpc/platforms/cell/spufs/backing_ops.c +++ b/arch/powerpc/platforms/cell/spufs/backing_ops.c @@ -268,6 +268,11 @@ static char *spu_backing_get_ls(struct spu_context *ctx) return ctx->csa.lscsa->ls; } +static u32 spu_backing_runcntl_read(struct spu_context *ctx) +{ + return ctx->csa.prob.spu_runcntl_RW; +} + static void spu_backing_runcntl_write(struct spu_context *ctx, u32 val) { spin_lock(&ctx->csa.register_lock); @@ -363,6 +368,7 @@ struct spu_context_ops spu_backing_ops = { .npc_write = spu_backing_npc_write, .status_read = spu_backing_status_read, .get_ls = spu_backing_get_ls, + .runcntl_read = spu_backing_runcntl_read, .runcntl_write = spu_backing_runcntl_write, .master_start = spu_backing_master_start, .master_stop = spu_backing_master_stop, diff --git a/arch/powerpc/platforms/cell/spufs/hw_ops.c b/arch/powerpc/platforms/cell/spufs/hw_ops.c index 69fc342e063..ae42e03b8c8 100644 --- a/arch/powerpc/platforms/cell/spufs/hw_ops.c +++ b/arch/powerpc/platforms/cell/spufs/hw_ops.c @@ -207,6 +207,11 @@ static char *spu_hw_get_ls(struct spu_context *ctx) return ctx->spu->local_store; } +static u32 spu_hw_runcntl_read(struct spu_context *ctx) +{ + return in_be32(&ctx->spu->problem->spu_runcntl_RW); +} + static void spu_hw_runcntl_write(struct spu_context *ctx, u32 val) { spin_lock_irq(&ctx->spu->register_lock); @@ -307,6 +312,7 @@ struct spu_context_ops spu_hw_ops = { .npc_write = spu_hw_npc_write, .status_read = spu_hw_status_read, .get_ls = spu_hw_get_ls, + .runcntl_read = spu_hw_runcntl_read, .runcntl_write = spu_hw_runcntl_write, .master_start = spu_hw_master_start, .master_stop = spu_hw_master_stop, diff --git a/arch/powerpc/platforms/cell/spufs/spufs.h b/arch/powerpc/platforms/cell/spufs/spufs.h index 135fbb53d8e..ca56b9b11c1 100644 --- a/arch/powerpc/platforms/cell/spufs/spufs.h +++ b/arch/powerpc/platforms/cell/spufs/spufs.h @@ -115,6 +115,7 @@ struct spu_context_ops { void (*npc_write) (struct spu_context * ctx, u32 data); u32(*status_read) (struct spu_context * ctx); char*(*get_ls) (struct spu_context * ctx); + u32 (*runcntl_read) (struct spu_context * ctx); void (*runcntl_write) (struct spu_context * ctx, u32 data); void (*master_start) (struct spu_context * ctx); void (*master_stop) (struct spu_context * ctx); -- cgit v1.2.3-70-g09d2 From c6730ed4c280ff9e55766796523c94a7d111da09 Mon Sep 17 00:00:00 2001 From: Jeremy Kerr Date: Mon, 20 Nov 2006 18:45:10 +0100 Subject: [POWERPC] spufs: Load isolation kernel from spu_run In order to fit with the "don't-run-spus-outside-of-spu_run" model, this patch starts the isolated-mode loader in spu_run, rather than spu_create. If spu_run is passed an isolated-mode context that isn't in isolated mode state, it will run the loader. This fixes potential races with the isolated SPE app doing a stop-and-signal before the PPE has called spu_run: bugzilla #29111. Also (in conjunction with a mambo patch), this addresses #28565, as we always set the runcntrl register when entering spu_run. It is up to libspe to ensure that isolated-mode apps are cleaned up after running to completion - ie, put the app through the "ISOLATE EXIT" state (see Ch11 of the CBEA). Signed-off-by: Jeremy Kerr Signed-off-by: Arnd Bergmann Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/cell/spufs/file.c | 32 -------- arch/powerpc/platforms/cell/spufs/inode.c | 109 +--------------------------- arch/powerpc/platforms/cell/spufs/run.c | 117 ++++++++++++++++++++++++++++-- arch/powerpc/platforms/cell/spufs/spufs.h | 3 +- 4 files changed, 113 insertions(+), 148 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/platforms/cell/spufs/file.c b/arch/powerpc/platforms/cell/spufs/file.c index e6667530332..50e0afc46ad 100644 --- a/arch/powerpc/platforms/cell/spufs/file.c +++ b/arch/powerpc/platforms/cell/spufs/file.c @@ -1358,37 +1358,6 @@ static struct file_operations spufs_mfc_fops = { .mmap = spufs_mfc_mmap, }; - -static int spufs_recycle_open(struct inode *inode, struct file *file) -{ - file->private_data = SPUFS_I(inode)->i_ctx; - return nonseekable_open(inode, file); -} - -static ssize_t spufs_recycle_write(struct file *file, - const char __user *buffer, size_t size, loff_t *pos) -{ - struct spu_context *ctx = file->private_data; - int ret; - - if (!(ctx->flags & SPU_CREATE_ISOLATE)) - return -EINVAL; - - if (size < 1) - return -EINVAL; - - ret = spu_recycle_isolated(ctx); - - if (ret) - return ret; - return size; -} - -static struct file_operations spufs_recycle_fops = { - .open = spufs_recycle_open, - .write = spufs_recycle_write, -}; - static void spufs_npc_set(void *data, u64 val) { struct spu_context *ctx = data; @@ -1789,6 +1758,5 @@ struct tree_descr spufs_dir_nosched_contents[] = { { "psmap", &spufs_psmap_fops, 0666, }, { "phys-id", &spufs_id_ops, 0666, }, { "object-id", &spufs_object_id_ops, 0666, }, - { "recycle", &spufs_recycle_fops, 0222, }, {}, }; diff --git a/arch/powerpc/platforms/cell/spufs/inode.c b/arch/powerpc/platforms/cell/spufs/inode.c index 1fbcc536924..d5f0a21a19d 100644 --- a/arch/powerpc/platforms/cell/spufs/inode.c +++ b/arch/powerpc/platforms/cell/spufs/inode.c @@ -34,8 +34,6 @@ #include #include -#include -#include #include #include #include @@ -43,7 +41,7 @@ #include "spufs.h" static kmem_cache_t *spufs_inode_cache; -static char *isolated_loader; +char *isolated_loader; static struct inode * spufs_alloc_inode(struct super_block *sb) @@ -235,102 +233,6 @@ struct file_operations spufs_context_fops = { .fsync = simple_sync_file, }; -static int spu_setup_isolated(struct spu_context *ctx) -{ - int ret; - u64 __iomem *mfc_cntl; - u64 sr1; - u32 status; - unsigned long timeout; - const u32 status_loading = SPU_STATUS_RUNNING - | SPU_STATUS_ISOLATED_STATE | SPU_STATUS_ISOLATED_LOAD_STATUS; - - if (!isolated_loader) - return -ENODEV; - - /* prevent concurrent operation with spu_run */ - down(&ctx->run_sema); - ctx->ops->master_start(ctx); - - ret = spu_acquire_exclusive(ctx); - if (ret) - goto out; - - mfc_cntl = &ctx->spu->priv2->mfc_control_RW; - - /* purge the MFC DMA queue to ensure no spurious accesses before we - * enter kernel mode */ - timeout = jiffies + HZ; - out_be64(mfc_cntl, MFC_CNTL_PURGE_DMA_REQUEST); - while ((in_be64(mfc_cntl) & MFC_CNTL_PURGE_DMA_STATUS_MASK) - != MFC_CNTL_PURGE_DMA_COMPLETE) { - if (time_after(jiffies, timeout)) { - printk(KERN_ERR "%s: timeout flushing MFC DMA queue\n", - __FUNCTION__); - ret = -EIO; - goto out_unlock; - } - cond_resched(); - } - - /* put the SPE in kernel mode to allow access to the loader */ - sr1 = spu_mfc_sr1_get(ctx->spu); - sr1 &= ~MFC_STATE1_PROBLEM_STATE_MASK; - spu_mfc_sr1_set(ctx->spu, sr1); - - /* start the loader */ - ctx->ops->signal1_write(ctx, (unsigned long)isolated_loader >> 32); - ctx->ops->signal2_write(ctx, - (unsigned long)isolated_loader & 0xffffffff); - - ctx->ops->runcntl_write(ctx, - SPU_RUNCNTL_RUNNABLE | SPU_RUNCNTL_ISOLATE); - - ret = 0; - timeout = jiffies + HZ; - while (((status = ctx->ops->status_read(ctx)) & status_loading) == - status_loading) { - if (time_after(jiffies, timeout)) { - printk(KERN_ERR "%s: timeout waiting for loader\n", - __FUNCTION__); - ret = -EIO; - goto out_drop_priv; - } - cond_resched(); - } - - if (!(status & SPU_STATUS_RUNNING)) { - /* If isolated LOAD has failed: run SPU, we will get a stop-and - * signal later. */ - pr_debug("%s: isolated LOAD failed\n", __FUNCTION__); - ctx->ops->runcntl_write(ctx, SPU_RUNCNTL_RUNNABLE); - ret = -EACCES; - - } else if (!(status & SPU_STATUS_ISOLATED_STATE)) { - /* This isn't allowed by the CBEA, but check anyway */ - pr_debug("%s: SPU fell out of isolated mode?\n", __FUNCTION__); - ctx->ops->runcntl_write(ctx, SPU_RUNCNTL_STOP); - ret = -EINVAL; - } - -out_drop_priv: - /* Finished accessing the loader. Drop kernel mode */ - sr1 |= MFC_STATE1_PROBLEM_STATE_MASK; - spu_mfc_sr1_set(ctx->spu, sr1); - -out_unlock: - spu_release_exclusive(ctx); -out: - ctx->ops->master_stop(ctx); - up(&ctx->run_sema); - return ret; -} - -int spu_recycle_isolated(struct spu_context *ctx) -{ - return spu_setup_isolated(ctx); -} - static int spufs_mkdir(struct inode *dir, struct dentry *dentry, unsigned int flags, int mode) @@ -439,15 +341,6 @@ static int spufs_create_context(struct inode *inode, out_unlock: mutex_unlock(&inode->i_mutex); out: - if (ret >= 0 && (flags & SPU_CREATE_ISOLATE)) { - int setup_err = spu_setup_isolated( - SPUFS_I(dentry->d_inode)->i_ctx); - /* FIXME: clean up context again on failure to avoid - leak. */ - if (setup_err) - ret = setup_err; - } - dput(dentry); return ret; } diff --git a/arch/powerpc/platforms/cell/spufs/run.c b/arch/powerpc/platforms/cell/spufs/run.c index 212b9c2f04a..1be4e3339d8 100644 --- a/arch/powerpc/platforms/cell/spufs/run.c +++ b/arch/powerpc/platforms/cell/spufs/run.c @@ -4,6 +4,8 @@ #include #include +#include +#include #include #include "spufs.h" @@ -51,21 +53,122 @@ static inline int spu_stopped(struct spu_context *ctx, u32 * stat) return (!(*stat & 0x1) || pte_fault || spu->class_0_pending) ? 1 : 0; } +static int spu_setup_isolated(struct spu_context *ctx) +{ + int ret; + u64 __iomem *mfc_cntl; + u64 sr1; + u32 status; + unsigned long timeout; + const u32 status_loading = SPU_STATUS_RUNNING + | SPU_STATUS_ISOLATED_STATE | SPU_STATUS_ISOLATED_LOAD_STATUS; + + if (!isolated_loader) + return -ENODEV; + + ret = spu_acquire_exclusive(ctx); + if (ret) + goto out; + + mfc_cntl = &ctx->spu->priv2->mfc_control_RW; + + /* purge the MFC DMA queue to ensure no spurious accesses before we + * enter kernel mode */ + timeout = jiffies + HZ; + out_be64(mfc_cntl, MFC_CNTL_PURGE_DMA_REQUEST); + while ((in_be64(mfc_cntl) & MFC_CNTL_PURGE_DMA_STATUS_MASK) + != MFC_CNTL_PURGE_DMA_COMPLETE) { + if (time_after(jiffies, timeout)) { + printk(KERN_ERR "%s: timeout flushing MFC DMA queue\n", + __FUNCTION__); + ret = -EIO; + goto out_unlock; + } + cond_resched(); + } + + /* put the SPE in kernel mode to allow access to the loader */ + sr1 = spu_mfc_sr1_get(ctx->spu); + sr1 &= ~MFC_STATE1_PROBLEM_STATE_MASK; + spu_mfc_sr1_set(ctx->spu, sr1); + + /* start the loader */ + ctx->ops->signal1_write(ctx, (unsigned long)isolated_loader >> 32); + ctx->ops->signal2_write(ctx, + (unsigned long)isolated_loader & 0xffffffff); + + ctx->ops->runcntl_write(ctx, + SPU_RUNCNTL_RUNNABLE | SPU_RUNCNTL_ISOLATE); + + ret = 0; + timeout = jiffies + HZ; + while (((status = ctx->ops->status_read(ctx)) & status_loading) == + status_loading) { + if (time_after(jiffies, timeout)) { + printk(KERN_ERR "%s: timeout waiting for loader\n", + __FUNCTION__); + ret = -EIO; + goto out_drop_priv; + } + cond_resched(); + } + + if (!(status & SPU_STATUS_RUNNING)) { + /* If isolated LOAD has failed: run SPU, we will get a stop-and + * signal later. */ + pr_debug("%s: isolated LOAD failed\n", __FUNCTION__); + ctx->ops->runcntl_write(ctx, SPU_RUNCNTL_RUNNABLE); + ret = -EACCES; + + } else if (!(status & SPU_STATUS_ISOLATED_STATE)) { + /* This isn't allowed by the CBEA, but check anyway */ + pr_debug("%s: SPU fell out of isolated mode?\n", __FUNCTION__); + ctx->ops->runcntl_write(ctx, SPU_RUNCNTL_STOP); + ret = -EINVAL; + } + +out_drop_priv: + /* Finished accessing the loader. Drop kernel mode */ + sr1 |= MFC_STATE1_PROBLEM_STATE_MASK; + spu_mfc_sr1_set(ctx->spu, sr1); + +out_unlock: + spu_release_exclusive(ctx); +out: + return ret; +} + static inline int spu_run_init(struct spu_context *ctx, u32 * npc) { int ret; unsigned long runcntl = SPU_RUNCNTL_RUNNABLE; - if ((ret = spu_acquire_runnable(ctx)) != 0) + ret = spu_acquire_runnable(ctx); + if (ret) return ret; - /* if we're in isolated mode, we would have started the SPU - * earlier, so don't do it again now. */ - if (!(ctx->flags & SPU_CREATE_ISOLATE)) { + if (ctx->flags & SPU_CREATE_ISOLATE) { + if (!(ctx->ops->status_read(ctx) & SPU_STATUS_ISOLATED_STATE)) { + /* Need to release ctx, because spu_setup_isolated will + * acquire it exclusively. + */ + spu_release(ctx); + ret = spu_setup_isolated(ctx); + if (!ret) + ret = spu_acquire_runnable(ctx); + } + + /* if userspace has set the runcntrl register (eg, to issue an + * isolated exit), we need to re-set it here */ + runcntl = ctx->ops->runcntl_read(ctx) & + (SPU_RUNCNTL_RUNNABLE | SPU_RUNCNTL_ISOLATE); + if (runcntl == 0) + runcntl = SPU_RUNCNTL_RUNNABLE; + } else ctx->ops->npc_write(ctx, *npc); - ctx->ops->runcntl_write(ctx, runcntl); - } - return 0; + + ctx->ops->runcntl_write(ctx, runcntl); + return ret; } static inline int spu_run_fini(struct spu_context *ctx, u32 * npc, diff --git a/arch/powerpc/platforms/cell/spufs/spufs.h b/arch/powerpc/platforms/cell/spufs/spufs.h index ca56b9b11c1..23d20f38056 100644 --- a/arch/powerpc/platforms/cell/spufs/spufs.h +++ b/arch/powerpc/platforms/cell/spufs/spufs.h @@ -183,7 +183,8 @@ void spu_yield(struct spu_context *ctx); int __init spu_sched_init(void); void __exit spu_sched_exit(void); -int spu_recycle_isolated(struct spu_context *ctx); +extern char *isolated_loader; + /* * spufs_wait * Same as wait_event_interruptible(), except that here -- cgit v1.2.3-70-g09d2 From 5231800c6fb99c106951a5e1a8e739ad9657e93f Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Mon, 20 Nov 2006 18:45:12 +0100 Subject: [POWERPC] cell: Add symbol exports for oprofile Add symbol-exports for the new routines in arch/powerpc/platforms/cell/pmu.c. They are needed for Oprofile, which can be built as a module. Signed-off-by: Kevin Corry Signed-off-by: Arnd Bergmann Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/cell/pmu.c | 13 +++++++++++++ 1 file changed, 13 insertions(+) (limited to 'arch/powerpc') diff --git a/arch/powerpc/platforms/cell/pmu.c b/arch/powerpc/platforms/cell/pmu.c index 30d17ce236a..22ac732b1f8 100644 --- a/arch/powerpc/platforms/cell/pmu.c +++ b/arch/powerpc/platforms/cell/pmu.c @@ -85,6 +85,7 @@ u32 cbe_read_phys_ctr(u32 cpu, u32 phys_ctr) return val; } +EXPORT_SYMBOL_GPL(cbe_read_phys_ctr); void cbe_write_phys_ctr(u32 cpu, u32 phys_ctr, u32 val) { @@ -111,6 +112,7 @@ void cbe_write_phys_ctr(u32 cpu, u32 phys_ctr, u32 val) } } } +EXPORT_SYMBOL_GPL(cbe_write_phys_ctr); /* * "Logical" counter registers. @@ -130,6 +132,7 @@ u32 cbe_read_ctr(u32 cpu, u32 ctr) return val; } +EXPORT_SYMBOL_GPL(cbe_read_ctr); void cbe_write_ctr(u32 cpu, u32 ctr, u32 val) { @@ -149,6 +152,7 @@ void cbe_write_ctr(u32 cpu, u32 ctr, u32 val) cbe_write_phys_ctr(cpu, phys_ctr, val); } +EXPORT_SYMBOL_GPL(cbe_write_ctr); /* * Counter-control registers. @@ -164,12 +168,14 @@ u32 cbe_read_pm07_control(u32 cpu, u32 ctr) return pm07_control; } +EXPORT_SYMBOL_GPL(cbe_read_pm07_control); void cbe_write_pm07_control(u32 cpu, u32 ctr, u32 val) { if (ctr < NR_CTRS) WRITE_WO_MMIO(pm07_control[ctr], val); } +EXPORT_SYMBOL_GPL(cbe_write_pm07_control); /* * Other PMU control registers. Most of these are write-only. @@ -215,6 +221,7 @@ u32 cbe_read_pm(u32 cpu, enum pm_reg_name reg) return val; } +EXPORT_SYMBOL_GPL(cbe_read_pm); void cbe_write_pm(u32 cpu, enum pm_reg_name reg, u32 val) { @@ -252,6 +259,7 @@ void cbe_write_pm(u32 cpu, enum pm_reg_name reg, u32 val) break; } } +EXPORT_SYMBOL_GPL(cbe_write_pm); /* * Get/set the size of a physical counter to either 16 or 32 bits. @@ -268,6 +276,7 @@ u32 cbe_get_ctr_size(u32 cpu, u32 phys_ctr) return size; } +EXPORT_SYMBOL_GPL(cbe_get_ctr_size); void cbe_set_ctr_size(u32 cpu, u32 phys_ctr, u32 ctr_size) { @@ -287,6 +296,7 @@ void cbe_set_ctr_size(u32 cpu, u32 phys_ctr, u32 ctr_size) cbe_write_pm(cpu, pm_control, pm_ctrl); } } +EXPORT_SYMBOL_GPL(cbe_set_ctr_size); /* * Enable/disable the entire performance monitoring unit. @@ -304,6 +314,7 @@ void cbe_enable_pm(u32 cpu) pm_ctrl = cbe_read_pm(cpu, pm_control) | CBE_PM_ENABLE_PERF_MON; cbe_write_pm(cpu, pm_control, pm_ctrl); } +EXPORT_SYMBOL_GPL(cbe_enable_pm); void cbe_disable_pm(u32 cpu) { @@ -311,6 +322,7 @@ void cbe_disable_pm(u32 cpu) pm_ctrl = cbe_read_pm(cpu, pm_control) & ~CBE_PM_ENABLE_PERF_MON; cbe_write_pm(cpu, pm_control, pm_ctrl); } +EXPORT_SYMBOL_GPL(cbe_disable_pm); /* * Reading from the trace_buffer. @@ -325,4 +337,5 @@ void cbe_read_trace_buffer(u32 cpu, u64 *buf) *buf++ = in_be64(&pmd_regs->trace_buffer_0_63); *buf++ = in_be64(&pmd_regs->trace_buffer_64_127); } +EXPORT_SYMBOL_GPL(cbe_read_trace_buffer); -- cgit v1.2.3-70-g09d2 From c93dfa0766bae3c92ec8311bddbbf16b8e661f59 Mon Sep 17 00:00:00 2001 From: Kevin Corry Date: Mon, 20 Nov 2006 18:45:13 +0100 Subject: [POWERPC] cell: PMU register macros More macros for manipulating bits in the Cell PMU control registers. Signed-off-by: Kevin Corry Signed-off-by: Carl Love Signed-off-by: Arnd Bergmann Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/cell/cbe_regs.h | 23 ++++++++++++++++++++++- 1 file changed, 22 insertions(+), 1 deletion(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/platforms/cell/cbe_regs.h b/arch/powerpc/platforms/cell/cbe_regs.h index 91083f51a0c..bc94e664c61 100644 --- a/arch/powerpc/platforms/cell/cbe_regs.h +++ b/arch/powerpc/platforms/cell/cbe_regs.h @@ -38,7 +38,28 @@ /* Macros for the pm_control register. */ #define CBE_PM_16BIT_CTR(ctr) (1 << (24 - ((ctr) & (NR_PHYS_CTRS - 1)))) #define CBE_PM_ENABLE_PERF_MON 0x80000000 - +#define CBE_PM_STOP_AT_MAX 0x40000000 +#define CBE_PM_TRACE_MODE_GET(pm_control) (((pm_control) >> 28) & 0x3) +#define CBE_PM_TRACE_MODE_SET(mode) (((mode) & 0x3) << 28) +#define CBE_PM_COUNT_MODE_SET(count) (((count) & 0x3) << 18) +#define CBE_PM_FREEZE_ALL_CTRS 0x00100000 +#define CBE_PM_ENABLE_EXT_TRACE 0x00008000 + +/* Macros for the trace_address register. */ +#define CBE_PM_TRACE_BUF_FULL 0x00000800 +#define CBE_PM_TRACE_BUF_EMPTY 0x00000400 +#define CBE_PM_TRACE_BUF_DATA_COUNT(ta) ((ta) & 0x3ff) +#define CBE_PM_TRACE_BUF_MAX_COUNT 0x400 + +/* Macros for the pm07_control registers. */ +#define CBE_PM_CTR_INPUT_MUX(pm07_control) (((pm07_control) >> 26) & 0x3f) +#define CBE_PM_CTR_INPUT_CONTROL 0x02000000 +#define CBE_PM_CTR_POLARITY 0x01000000 +#define CBE_PM_CTR_COUNT_CYCLES 0x00800000 +#define CBE_PM_CTR_ENABLE 0x00400000 + +/* Macros for the pm_status register. */ +#define CBE_PM_CTR_OVERFLOW_INTR(ctr) (1 << (31 - ((ctr) & 7))) union spe_reg { u64 val; -- cgit v1.2.3-70-g09d2 From e4f6948cfc8b9626022db0f93e7cf2ce5c0998cd Mon Sep 17 00:00:00 2001 From: Kevin Corry Date: Mon, 20 Nov 2006 18:45:14 +0100 Subject: [POWERPC] cell: Move PMU-related stuff to include/asm-powerpc/cell-pmu.h Move some PMU-related macros and function prototypes from cbe_regs.h and pmu.h in arch/powerpc/platforms/cell/ to a new header at include/asm-powerpc/cell-pmu.h This is cleaner to use from the oprofile code, since that sits in arch/powerpc/oprofile, not in the cell platform directory. Signed-off-by: Kevin Corry Signed-off-by: Arnd Bergmann Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/cell/cbe_regs.h | 31 +----------- arch/powerpc/platforms/cell/pmu.c | 1 - arch/powerpc/platforms/cell/pmu.h | 57 --------------------- include/asm-powerpc/cell-pmu.h | 90 ++++++++++++++++++++++++++++++++++ 4 files changed, 92 insertions(+), 87 deletions(-) delete mode 100644 arch/powerpc/platforms/cell/pmu.h create mode 100644 include/asm-powerpc/cell-pmu.h (limited to 'arch/powerpc') diff --git a/arch/powerpc/platforms/cell/cbe_regs.h b/arch/powerpc/platforms/cell/cbe_regs.h index bc94e664c61..a29f4a5f52c 100644 --- a/arch/powerpc/platforms/cell/cbe_regs.h +++ b/arch/powerpc/platforms/cell/cbe_regs.h @@ -15,6 +15,8 @@ #ifndef CBE_REGS_H #define CBE_REGS_H +#include + /* * * Some HID register definitions @@ -35,32 +37,6 @@ * */ -/* Macros for the pm_control register. */ -#define CBE_PM_16BIT_CTR(ctr) (1 << (24 - ((ctr) & (NR_PHYS_CTRS - 1)))) -#define CBE_PM_ENABLE_PERF_MON 0x80000000 -#define CBE_PM_STOP_AT_MAX 0x40000000 -#define CBE_PM_TRACE_MODE_GET(pm_control) (((pm_control) >> 28) & 0x3) -#define CBE_PM_TRACE_MODE_SET(mode) (((mode) & 0x3) << 28) -#define CBE_PM_COUNT_MODE_SET(count) (((count) & 0x3) << 18) -#define CBE_PM_FREEZE_ALL_CTRS 0x00100000 -#define CBE_PM_ENABLE_EXT_TRACE 0x00008000 - -/* Macros for the trace_address register. */ -#define CBE_PM_TRACE_BUF_FULL 0x00000800 -#define CBE_PM_TRACE_BUF_EMPTY 0x00000400 -#define CBE_PM_TRACE_BUF_DATA_COUNT(ta) ((ta) & 0x3ff) -#define CBE_PM_TRACE_BUF_MAX_COUNT 0x400 - -/* Macros for the pm07_control registers. */ -#define CBE_PM_CTR_INPUT_MUX(pm07_control) (((pm07_control) >> 26) & 0x3f) -#define CBE_PM_CTR_INPUT_CONTROL 0x02000000 -#define CBE_PM_CTR_POLARITY 0x01000000 -#define CBE_PM_CTR_COUNT_CYCLES 0x00800000 -#define CBE_PM_CTR_ENABLE 0x00400000 - -/* Macros for the pm_status register. */ -#define CBE_PM_CTR_OVERFLOW_INTR(ctr) (1 << (31 - ((ctr) & 7))) - union spe_reg { u64 val; u8 spe[8]; @@ -160,9 +136,6 @@ extern struct cbe_pmd_regs __iomem *cbe_get_cpu_pmd_regs(int cpu); * counters currently have a value waiting to be written. */ -#define NR_PHYS_CTRS 4 -#define NR_CTRS (NR_PHYS_CTRS * 2) - struct cbe_pmd_shadow_regs { u32 group_control; u32 debug_bus_control; diff --git a/arch/powerpc/platforms/cell/pmu.c b/arch/powerpc/platforms/cell/pmu.c index 22ac732b1f8..ae6fd1c12d4 100644 --- a/arch/powerpc/platforms/cell/pmu.c +++ b/arch/powerpc/platforms/cell/pmu.c @@ -30,7 +30,6 @@ #include "cbe_regs.h" #include "interrupt.h" -#include "pmu.h" /* * When writing to write-only mmio addresses, save a shadow copy. All of the diff --git a/arch/powerpc/platforms/cell/pmu.h b/arch/powerpc/platforms/cell/pmu.h deleted file mode 100644 index eb1e8e0af91..00000000000 --- a/arch/powerpc/platforms/cell/pmu.h +++ /dev/null @@ -1,57 +0,0 @@ -/* - * Cell Broadband Engine Performance Monitor - * - * (C) Copyright IBM Corporation 2001,2006 - * - * Author: - * David Erb (djerb@us.ibm.com) - * Kevin Corry (kevcorry@us.ibm.com) - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2, or (at your option) - * any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#ifndef __PERFMON_H__ -#define __PERFMON_H__ - -enum pm_reg_name { - group_control, - debug_bus_control, - trace_address, - ext_tr_timer, - pm_status, - pm_control, - pm_interval, - pm_start_stop, -}; - -extern u32 cbe_read_phys_ctr(u32 cpu, u32 phys_ctr); -extern void cbe_write_phys_ctr(u32 cpu, u32 phys_ctr, u32 val); -extern u32 cbe_read_ctr(u32 cpu, u32 ctr); -extern void cbe_write_ctr(u32 cpu, u32 ctr, u32 val); - -extern u32 cbe_read_pm07_control(u32 cpu, u32 ctr); -extern void cbe_write_pm07_control(u32 cpu, u32 ctr, u32 val); -extern u32 cbe_read_pm (u32 cpu, enum pm_reg_name reg); -extern void cbe_write_pm (u32 cpu, enum pm_reg_name reg, u32 val); - -extern u32 cbe_get_ctr_size(u32 cpu, u32 phys_ctr); -extern void cbe_set_ctr_size(u32 cpu, u32 phys_ctr, u32 ctr_size); - -extern void cbe_enable_pm(u32 cpu); -extern void cbe_disable_pm(u32 cpu); - -extern void cbe_read_trace_buffer(u32 cpu, u64 *buf); - -#endif diff --git a/include/asm-powerpc/cell-pmu.h b/include/asm-powerpc/cell-pmu.h new file mode 100644 index 00000000000..c416fe30dee --- /dev/null +++ b/include/asm-powerpc/cell-pmu.h @@ -0,0 +1,90 @@ +/* + * Cell Broadband Engine Performance Monitor + * + * (C) Copyright IBM Corporation 2006 + * + * Author: + * David Erb (djerb@us.ibm.com) + * Kevin Corry (kevcorry@us.ibm.com) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef __ASM_CELL_PMU_H__ +#define __ASM_CELL_PMU_H__ + +/* The Cell PMU has four hardware performance counters, which can be + * configured as four 32-bit counters or eight 16-bit counters. + */ +#define NR_PHYS_CTRS 4 +#define NR_CTRS (NR_PHYS_CTRS * 2) + +/* Macros for the pm_control register. */ +#define CBE_PM_16BIT_CTR(ctr) (1 << (24 - ((ctr) & (NR_PHYS_CTRS - 1)))) +#define CBE_PM_ENABLE_PERF_MON 0x80000000 +#define CBE_PM_STOP_AT_MAX 0x40000000 +#define CBE_PM_TRACE_MODE_GET(pm_control) (((pm_control) >> 28) & 0x3) +#define CBE_PM_TRACE_MODE_SET(mode) (((mode) & 0x3) << 28) +#define CBE_PM_COUNT_MODE_SET(count) (((count) & 0x3) << 18) +#define CBE_PM_FREEZE_ALL_CTRS 0x00100000 +#define CBE_PM_ENABLE_EXT_TRACE 0x00008000 + +/* Macros for the trace_address register. */ +#define CBE_PM_TRACE_BUF_FULL 0x00000800 +#define CBE_PM_TRACE_BUF_EMPTY 0x00000400 +#define CBE_PM_TRACE_BUF_DATA_COUNT(ta) ((ta) & 0x3ff) +#define CBE_PM_TRACE_BUF_MAX_COUNT 0x400 + +/* Macros for the pm07_control registers. */ +#define CBE_PM_CTR_INPUT_MUX(pm07_control) (((pm07_control) >> 26) & 0x3f) +#define CBE_PM_CTR_INPUT_CONTROL 0x02000000 +#define CBE_PM_CTR_POLARITY 0x01000000 +#define CBE_PM_CTR_COUNT_CYCLES 0x00800000 +#define CBE_PM_CTR_ENABLE 0x00400000 + +/* Macros for the pm_status register. */ +#define CBE_PM_CTR_OVERFLOW_INTR(ctr) (1 << (31 - ((ctr) & 7))) + +enum pm_reg_name { + group_control, + debug_bus_control, + trace_address, + ext_tr_timer, + pm_status, + pm_control, + pm_interval, + pm_start_stop, +}; + +/* Routines for reading/writing the PMU registers. */ +extern u32 cbe_read_phys_ctr(u32 cpu, u32 phys_ctr); +extern void cbe_write_phys_ctr(u32 cpu, u32 phys_ctr, u32 val); +extern u32 cbe_read_ctr(u32 cpu, u32 ctr); +extern void cbe_write_ctr(u32 cpu, u32 ctr, u32 val); + +extern u32 cbe_read_pm07_control(u32 cpu, u32 ctr); +extern void cbe_write_pm07_control(u32 cpu, u32 ctr, u32 val); +extern u32 cbe_read_pm(u32 cpu, enum pm_reg_name reg); +extern void cbe_write_pm(u32 cpu, enum pm_reg_name reg, u32 val); + +extern u32 cbe_get_ctr_size(u32 cpu, u32 phys_ctr); +extern void cbe_set_ctr_size(u32 cpu, u32 phys_ctr, u32 ctr_size); + +extern void cbe_enable_pm(u32 cpu); +extern void cbe_disable_pm(u32 cpu); + +extern void cbe_read_trace_buffer(u32 cpu, u64 *buf); + +#endif /* __ASM_CELL_PMU_H__ */ -- cgit v1.2.3-70-g09d2 From 0443bbd3d8496f9c2bc3e8c9d1833c6638722743 Mon Sep 17 00:00:00 2001 From: Kevin Corry Date: Mon, 20 Nov 2006 18:45:15 +0100 Subject: [POWERPC] cell: Add routines for managing PMU interrupts The following routines are added to arch/powerpc/platforms/cell/pmu.c: cbe_clear_pm_interrupts() cbe_enable_pm_interrupts() cbe_disable_pm_interrupts() cbe_query_pm_interrupts() cbe_pm_irq() cbe_init_pm_irq() This also adds a routine in arch/powerpc/platforms/cell/interrupt.c and some macros in cbe_regs.h to manipulate the IIC_IR register: iic_set_interrupt_routing() Signed-off-by: Kevin Corry Signed-off-by: Carl Love Signed-off-by: Arnd Bergmann Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/cell/cbe_regs.h | 8 ++++ arch/powerpc/platforms/cell/interrupt.c | 16 ++++++++ arch/powerpc/platforms/cell/interrupt.h | 2 + arch/powerpc/platforms/cell/pmu.c | 70 +++++++++++++++++++++++++++++++++ include/asm-powerpc/cell-pmu.h | 5 +++ 5 files changed, 101 insertions(+) (limited to 'arch/powerpc') diff --git a/arch/powerpc/platforms/cell/cbe_regs.h b/arch/powerpc/platforms/cell/cbe_regs.h index a29f4a5f52c..440a7ecc66e 100644 --- a/arch/powerpc/platforms/cell/cbe_regs.h +++ b/arch/powerpc/platforms/cell/cbe_regs.h @@ -185,6 +185,14 @@ struct cbe_iic_regs { struct cbe_iic_thread_regs thread[2]; /* 0x0400 */ u64 iic_ir; /* 0x0440 */ +#define CBE_IIC_IR_PRIO(x) (((x) & 0xf) << 12) +#define CBE_IIC_IR_DEST_NODE(x) (((x) & 0xf) << 4) +#define CBE_IIC_IR_DEST_UNIT(x) ((x) & 0xf) +#define CBE_IIC_IR_IOC_0 0x0 +#define CBE_IIC_IR_IOC_1S 0xb +#define CBE_IIC_IR_PT_0 0xe +#define CBE_IIC_IR_PT_1 0xf + u64 iic_is; /* 0x0448 */ #define CBE_IIC_IS_PMI 0x2 diff --git a/arch/powerpc/platforms/cell/interrupt.c b/arch/powerpc/platforms/cell/interrupt.c index a914c12b406..6666d037eb4 100644 --- a/arch/powerpc/platforms/cell/interrupt.c +++ b/arch/powerpc/platforms/cell/interrupt.c @@ -396,3 +396,19 @@ void __init iic_init_IRQ(void) /* Enable on current CPU */ iic_setup_cpu(); } + +void iic_set_interrupt_routing(int cpu, int thread, int priority) +{ + struct cbe_iic_regs __iomem *iic_regs = cbe_get_cpu_iic_regs(cpu); + u64 iic_ir = 0; + int node = cpu >> 1; + + /* Set which node and thread will handle the next interrupt */ + iic_ir |= CBE_IIC_IR_PRIO(priority) | + CBE_IIC_IR_DEST_NODE(node); + if (thread == 0) + iic_ir |= CBE_IIC_IR_DEST_UNIT(CBE_IIC_IR_PT_0); + else + iic_ir |= CBE_IIC_IR_DEST_UNIT(CBE_IIC_IR_PT_1); + out_be64(&iic_regs->iic_ir, iic_ir); +} diff --git a/arch/powerpc/platforms/cell/interrupt.h b/arch/powerpc/platforms/cell/interrupt.h index 9ba1d3c17b4..942dc39d604 100644 --- a/arch/powerpc/platforms/cell/interrupt.h +++ b/arch/powerpc/platforms/cell/interrupt.h @@ -83,5 +83,7 @@ extern u8 iic_get_target_id(int cpu); extern void spider_init_IRQ(void); +extern void iic_set_interrupt_routing(int cpu, int thread, int priority); + #endif #endif /* ASM_CELL_PIC_H */ diff --git a/arch/powerpc/platforms/cell/pmu.c b/arch/powerpc/platforms/cell/pmu.c index ae6fd1c12d4..f28abf2fc27 100644 --- a/arch/powerpc/platforms/cell/pmu.c +++ b/arch/powerpc/platforms/cell/pmu.c @@ -22,9 +22,11 @@ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ +#include #include #include #include +#include #include #include @@ -338,3 +340,71 @@ void cbe_read_trace_buffer(u32 cpu, u64 *buf) } EXPORT_SYMBOL_GPL(cbe_read_trace_buffer); +/* + * Enabling/disabling interrupts for the entire performance monitoring unit. + */ + +u32 cbe_query_pm_interrupts(u32 cpu) +{ + return cbe_read_pm(cpu, pm_status); +} +EXPORT_SYMBOL_GPL(cbe_query_pm_interrupts); + +u32 cbe_clear_pm_interrupts(u32 cpu) +{ + /* Reading pm_status clears the interrupt bits. */ + return cbe_query_pm_interrupts(cpu); +} +EXPORT_SYMBOL_GPL(cbe_clear_pm_interrupts); + +void cbe_enable_pm_interrupts(u32 cpu, u32 thread, u32 mask) +{ + /* Set which node and thread will handle the next interrupt. */ + iic_set_interrupt_routing(cpu, thread, 0); + + /* Enable the interrupt bits in the pm_status register. */ + if (mask) + cbe_write_pm(cpu, pm_status, mask); +} +EXPORT_SYMBOL_GPL(cbe_enable_pm_interrupts); + +void cbe_disable_pm_interrupts(u32 cpu) +{ + cbe_clear_pm_interrupts(cpu); + cbe_write_pm(cpu, pm_status, 0); +} +EXPORT_SYMBOL_GPL(cbe_disable_pm_interrupts); + +static irqreturn_t cbe_pm_irq(int irq, void *dev_id, struct pt_regs *regs) +{ + perf_irq(regs); + return IRQ_HANDLED; +} + +int __init cbe_init_pm_irq(void) +{ + unsigned int irq; + int rc, node; + + for_each_node(node) { + irq = irq_create_mapping(NULL, IIC_IRQ_IOEX_PMI | + (node << IIC_IRQ_NODE_SHIFT)); + if (irq == NO_IRQ) { + printk("ERROR: Unable to allocate irq for node %d\n", + node); + return -EINVAL; + } + + rc = request_irq(irq, cbe_pm_irq, + IRQF_DISABLED, "cbe-pmu-0", NULL); + if (rc) { + printk("ERROR: Request for irq on node %d failed\n", + node); + return rc; + } + } + + return 0; +} +arch_initcall(cbe_init_pm_irq); + diff --git a/include/asm-powerpc/cell-pmu.h b/include/asm-powerpc/cell-pmu.h index c416fe30dee..63037c352fd 100644 --- a/include/asm-powerpc/cell-pmu.h +++ b/include/asm-powerpc/cell-pmu.h @@ -87,4 +87,9 @@ extern void cbe_disable_pm(u32 cpu); extern void cbe_read_trace_buffer(u32 cpu, u64 *buf); +extern void cbe_enable_pm_interrupts(u32 cpu, u32 thread, u32 mask); +extern void cbe_disable_pm_interrupts(u32 cpu); +extern u32 cbe_query_pm_interrupts(u32 cpu); +extern u32 cbe_clear_pm_interrupts(u32 cpu); + #endif /* __ASM_CELL_PMU_H__ */ -- cgit v1.2.3-70-g09d2 From 18f2190d796198fbb5d4bc4c87511acf3ced7d47 Mon Sep 17 00:00:00 2001 From: Maynard Johnson Date: Mon, 20 Nov 2006 18:45:16 +0100 Subject: [POWERPC] cell: Add oprofile support Add PPU event-based and cycle-based profiling support to Oprofile for Cell. Oprofile is expected to collect data on all CPUs simultaneously. However, there is one set of performance counters per node. There are two hardware threads or virtual CPUs on each node. Hence, OProfile must multiplex in time the performance counter collection on the two virtual CPUs. The multiplexing of the performance counters is done by a virtual counter routine. Initially, the counters are configured to collect data on the even CPUs in the system, one CPU per node. In order to capture the PC for the virtual CPU when the performance counter interrupt occurs (the specified number of events between samples has occurred), the even processors are configured to handle the performance counter interrupts for their node. The virtual counter routine is called via a kernel timer after the virtual sample time. The routine stops the counters, saves the current counts, loads the last counts for the other virtual CPU on the node, sets interrupts to be handled by the other virtual CPU and restarts the counters, the virtual timer routine is scheduled to run again. The virtual sample time is kept relatively small to make sure sampling occurs on both CPUs on the node with a relatively small granularity. Whenever the counters overflow, the performance counter interrupt is called to collect the PC for the CPU where data is being collected. The oprofile driver relies on a firmware RTAS call to setup the debug bus to route the desired signals to the performance counter hardware to be counted. The RTAS call must set the routing registers appropriately in each of the islands to pass the signals down the debug bus as well as routing the signals from a particular island onto the bus. There is a second firmware RTAS call to reset the debug bus to the non pass thru state when the counters are not in use. Signed-off-by: Carl Love Signed-off-by: Maynard Johnson Signed-off-by: Arnd Bergmann Signed-off-by: Paul Mackerras --- arch/powerpc/configs/cell_defconfig | 3 +- arch/powerpc/kernel/cputable.c | 3 + arch/powerpc/oprofile/Makefile | 1 + arch/powerpc/oprofile/common.c | 15 +- arch/powerpc/oprofile/op_model_cell.c | 724 +++++++++++++++++++++++++++++++++ arch/powerpc/platforms/cell/cbe_regs.c | 12 + arch/powerpc/platforms/cell/pmu.c | 23 +- include/asm-powerpc/cell-pmu.h | 18 + include/asm-powerpc/cputable.h | 1 + include/asm-powerpc/oprofile_impl.h | 3 + 10 files changed, 798 insertions(+), 5 deletions(-) create mode 100644 arch/powerpc/oprofile/op_model_cell.c (limited to 'arch/powerpc') diff --git a/arch/powerpc/configs/cell_defconfig b/arch/powerpc/configs/cell_defconfig index dbcd4e3329d..3d6a2f10a7d 100644 --- a/arch/powerpc/configs/cell_defconfig +++ b/arch/powerpc/configs/cell_defconfig @@ -1121,7 +1121,8 @@ CONFIG_PLIST=y # # Instrumentation Support # -# CONFIG_PROFILING is not set +CONFIG_PROFILING=y +CONFIG_OPROFILE=y # CONFIG_KPROBES is not set # diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c index 1e4ed0731d1..992121b2d26 100644 --- a/arch/powerpc/kernel/cputable.c +++ b/arch/powerpc/kernel/cputable.c @@ -304,6 +304,9 @@ static struct cpu_spec cpu_specs[] = { PPC_FEATURE_SMT, .icache_bsize = 128, .dcache_bsize = 128, + .num_pmcs = 4, + .oprofile_cpu_type = "ppc64/cell-be", + .oprofile_type = PPC_OPROFILE_CELL, .platform = "ppc-cell-be", }, { /* PA Semi PA6T */ diff --git a/arch/powerpc/oprofile/Makefile b/arch/powerpc/oprofile/Makefile index 0b5df9c96ae..51c510fed7f 100644 --- a/arch/powerpc/oprofile/Makefile +++ b/arch/powerpc/oprofile/Makefile @@ -11,6 +11,7 @@ DRIVER_OBJS := $(addprefix ../../../drivers/oprofile/, \ timer_int.o ) oprofile-y := $(DRIVER_OBJS) common.o backtrace.o +oprofile-$(CONFIG_PPC_CELL) += op_model_cell.o oprofile-$(CONFIG_PPC64) += op_model_rs64.o op_model_power4.o oprofile-$(CONFIG_FSL_BOOKE) += op_model_fsl_booke.o oprofile-$(CONFIG_6xx) += op_model_7450.o diff --git a/arch/powerpc/oprofile/common.c b/arch/powerpc/oprofile/common.c index 63bbef3b63f..7a423437977 100644 --- a/arch/powerpc/oprofile/common.c +++ b/arch/powerpc/oprofile/common.c @@ -69,7 +69,10 @@ static void op_powerpc_cpu_start(void *dummy) static int op_powerpc_start(void) { - on_each_cpu(op_powerpc_cpu_start, NULL, 0, 1); + if (model->global_start) + model->global_start(ctr); + if (model->start) + on_each_cpu(op_powerpc_cpu_start, NULL, 0, 1); return 0; } @@ -80,7 +83,10 @@ static inline void op_powerpc_cpu_stop(void *dummy) static void op_powerpc_stop(void) { - on_each_cpu(op_powerpc_cpu_stop, NULL, 0, 1); + if (model->stop) + on_each_cpu(op_powerpc_cpu_stop, NULL, 0, 1); + if (model->global_stop) + model->global_stop(); } static int op_powerpc_create_files(struct super_block *sb, struct dentry *root) @@ -141,6 +147,11 @@ int __init oprofile_arch_init(struct oprofile_operations *ops) switch (cur_cpu_spec->oprofile_type) { #ifdef CONFIG_PPC64 +#ifdef CONFIG_PPC_CELL + case PPC_OPROFILE_CELL: + model = &op_model_cell; + break; +#endif case PPC_OPROFILE_RS64: model = &op_model_rs64; break; diff --git a/arch/powerpc/oprofile/op_model_cell.c b/arch/powerpc/oprofile/op_model_cell.c new file mode 100644 index 00000000000..2eb15f38810 --- /dev/null +++ b/arch/powerpc/oprofile/op_model_cell.c @@ -0,0 +1,724 @@ +/* + * Cell Broadband Engine OProfile Support + * + * (C) Copyright IBM Corporation 2006 + * + * Author: David Erb (djerb@us.ibm.com) + * Modifications: + * Carl Love + * Maynard Johnson + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "../platforms/cell/interrupt.h" + +#define PPU_CYCLES_EVENT_NUM 1 /* event number for CYCLES */ +#define CBE_COUNT_ALL_CYCLES 0x42800000 /* PPU cycle event specifier */ + +#define NUM_THREADS 2 +#define VIRT_CNTR_SW_TIME_NS 100000000 // 0.5 seconds + +struct pmc_cntrl_data { + unsigned long vcntr; + unsigned long evnts; + unsigned long masks; + unsigned long enabled; +}; + +/* + * ibm,cbe-perftools rtas parameters + */ + +struct pm_signal { + u16 cpu; /* Processor to modify */ + u16 sub_unit; /* hw subunit this applies to (if applicable) */ + u16 signal_group; /* Signal Group to Enable/Disable */ + u8 bus_word; /* Enable/Disable on this Trace/Trigger/Event + * Bus Word(s) (bitmask) + */ + u8 bit; /* Trigger/Event bit (if applicable) */ +}; + +/* + * rtas call arguments + */ +enum { + SUBFUNC_RESET = 1, + SUBFUNC_ACTIVATE = 2, + SUBFUNC_DEACTIVATE = 3, + + PASSTHRU_IGNORE = 0, + PASSTHRU_ENABLE = 1, + PASSTHRU_DISABLE = 2, +}; + +struct pm_cntrl { + u16 enable; + u16 stop_at_max; + u16 trace_mode; + u16 freeze; + u16 count_mode; +}; + +static struct { + u32 group_control; + u32 debug_bus_control; + struct pm_cntrl pm_cntrl; + u32 pm07_cntrl[NR_PHYS_CTRS]; +} pm_regs; + + +#define GET_SUB_UNIT(x) ((x & 0x0000f000) >> 12) +#define GET_BUS_WORD(x) ((x & 0x000000f0) >> 4) +#define GET_BUS_TYPE(x) ((x & 0x00000300) >> 8) +#define GET_POLARITY(x) ((x & 0x00000002) >> 1) +#define GET_COUNT_CYCLES(x) (x & 0x00000001) +#define GET_INPUT_CONTROL(x) ((x & 0x00000004) >> 2) + + +static DEFINE_PER_CPU(unsigned long[NR_PHYS_CTRS], pmc_values); + +static struct pmc_cntrl_data pmc_cntrl[NUM_THREADS][NR_PHYS_CTRS]; + +/* Interpetation of hdw_thread: + * 0 - even virtual cpus 0, 2, 4,... + * 1 - odd virtual cpus 1, 3, 5, ... + */ +static u32 hdw_thread; + +static u32 virt_cntr_inter_mask; +static struct timer_list timer_virt_cntr; + +/* pm_signal needs to be global since it is initialized in + * cell_reg_setup at the time when the necessary information + * is available. + */ +static struct pm_signal pm_signal[NR_PHYS_CTRS]; +static int pm_rtas_token; + +static u32 reset_value[NR_PHYS_CTRS]; +static int num_counters; +static int oprofile_running; +static spinlock_t virt_cntr_lock = SPIN_LOCK_UNLOCKED; + +static u32 ctr_enabled; + +static unsigned char trace_bus[4]; +static unsigned char input_bus[2]; + +/* + * Firmware interface functions + */ +static int +rtas_ibm_cbe_perftools(int subfunc, int passthru, + void *address, unsigned long length) +{ + u64 paddr = __pa(address); + + return rtas_call(pm_rtas_token, 5, 1, NULL, subfunc, passthru, + paddr >> 32, paddr & 0xffffffff, length); +} + +static void pm_rtas_reset_signals(u32 node) +{ + int ret; + struct pm_signal pm_signal_local; + + /* The debug bus is being set to the passthru disable state. + * However, the FW still expects atleast one legal signal routing + * entry or it will return an error on the arguments. If we don't + * supply a valid entry, we must ignore all return values. Ignoring + * all return values means we might miss an error we should be + * concerned about. + */ + + /* fw expects physical cpu #. */ + pm_signal_local.cpu = node; + pm_signal_local.signal_group = 21; + pm_signal_local.bus_word = 1; + pm_signal_local.sub_unit = 0; + pm_signal_local.bit = 0; + + ret = rtas_ibm_cbe_perftools(SUBFUNC_RESET, PASSTHRU_DISABLE, + &pm_signal_local, + sizeof(struct pm_signal)); + + if (ret) + printk(KERN_WARNING "%s: rtas returned: %d\n", + __FUNCTION__, ret); +} + +static void pm_rtas_activate_signals(u32 node, u32 count) +{ + int ret; + int j; + struct pm_signal pm_signal_local[NR_PHYS_CTRS]; + + for (j = 0; j < count; j++) { + /* fw expects physical cpu # */ + pm_signal_local[j].cpu = node; + pm_signal_local[j].signal_group = pm_signal[j].signal_group; + pm_signal_local[j].bus_word = pm_signal[j].bus_word; + pm_signal_local[j].sub_unit = pm_signal[j].sub_unit; + pm_signal_local[j].bit = pm_signal[j].bit; + } + + ret = rtas_ibm_cbe_perftools(SUBFUNC_ACTIVATE, PASSTHRU_ENABLE, + pm_signal_local, + count * sizeof(struct pm_signal)); + + if (ret) + printk(KERN_WARNING "%s: rtas returned: %d\n", + __FUNCTION__, ret); +} + +/* + * PM Signal functions + */ +static void set_pm_event(u32 ctr, int event, u32 unit_mask) +{ + struct pm_signal *p; + u32 signal_bit; + u32 bus_word, bus_type, count_cycles, polarity, input_control; + int j, i; + + if (event == PPU_CYCLES_EVENT_NUM) { + /* Special Event: Count all cpu cycles */ + pm_regs.pm07_cntrl[ctr] = CBE_COUNT_ALL_CYCLES; + p = &(pm_signal[ctr]); + p->signal_group = 21; + p->bus_word = 1; + p->sub_unit = 0; + p->bit = 0; + goto out; + } else { + pm_regs.pm07_cntrl[ctr] = 0; + } + + bus_word = GET_BUS_WORD(unit_mask); + bus_type = GET_BUS_TYPE(unit_mask); + count_cycles = GET_COUNT_CYCLES(unit_mask); + polarity = GET_POLARITY(unit_mask); + input_control = GET_INPUT_CONTROL(unit_mask); + signal_bit = (event % 100); + + p = &(pm_signal[ctr]); + + p->signal_group = event / 100; + p->bus_word = bus_word; + p->sub_unit = unit_mask & 0x0000f000; + + pm_regs.pm07_cntrl[ctr] = 0; + pm_regs.pm07_cntrl[ctr] |= PM07_CTR_COUNT_CYCLES(count_cycles); + pm_regs.pm07_cntrl[ctr] |= PM07_CTR_POLARITY(polarity); + pm_regs.pm07_cntrl[ctr] |= PM07_CTR_INPUT_CONTROL(input_control); + + if (input_control == 0) { + if (signal_bit > 31) { + signal_bit -= 32; + if (bus_word == 0x3) + bus_word = 0x2; + else if (bus_word == 0xc) + bus_word = 0x8; + } + + if ((bus_type == 0) && p->signal_group >= 60) + bus_type = 2; + if ((bus_type == 1) && p->signal_group >= 50) + bus_type = 0; + + pm_regs.pm07_cntrl[ctr] |= PM07_CTR_INPUT_MUX(signal_bit); + } else { + pm_regs.pm07_cntrl[ctr] = 0; + p->bit = signal_bit; + } + + for (i = 0; i < 4; i++) { + if (bus_word & (1 << i)) { + pm_regs.debug_bus_control |= + (bus_type << (31 - (2 * i) + 1)); + + for (j = 0; j < 2; j++) { + if (input_bus[j] == 0xff) { + input_bus[j] = i; + pm_regs.group_control |= + (i << (31 - i)); + break; + } + } + } + } +out: + ; +} + +static void write_pm_cntrl(int cpu, struct pm_cntrl *pm_cntrl) +{ + /* Oprofile will use 32 bit counters, set bits 7:10 to 0 */ + u32 val = 0; + if (pm_cntrl->enable == 1) + val |= CBE_PM_ENABLE_PERF_MON; + + if (pm_cntrl->stop_at_max == 1) + val |= CBE_PM_STOP_AT_MAX; + + if (pm_cntrl->trace_mode == 1) + val |= CBE_PM_TRACE_MODE_SET(pm_cntrl->trace_mode); + + if (pm_cntrl->freeze == 1) + val |= CBE_PM_FREEZE_ALL_CTRS; + + /* Routine set_count_mode must be called previously to set + * the count mode based on the user selection of user and kernel. + */ + val |= CBE_PM_COUNT_MODE_SET(pm_cntrl->count_mode); + cbe_write_pm(cpu, pm_control, val); +} + +static inline void +set_count_mode(u32 kernel, u32 user, struct pm_cntrl *pm_cntrl) +{ + /* The user must specify user and kernel if they want them. If + * neither is specified, OProfile will count in hypervisor mode + */ + if (kernel) { + if (user) + pm_cntrl->count_mode = CBE_COUNT_ALL_MODES; + else + pm_cntrl->count_mode = CBE_COUNT_SUPERVISOR_MODE; + } else { + if (user) + pm_cntrl->count_mode = CBE_COUNT_PROBLEM_MODE; + else + pm_cntrl->count_mode = CBE_COUNT_HYPERVISOR_MODE; + } +} + +static inline void enable_ctr(u32 cpu, u32 ctr, u32 * pm07_cntrl) +{ + + pm07_cntrl[ctr] |= PM07_CTR_ENABLE(1); + cbe_write_pm07_control(cpu, ctr, pm07_cntrl[ctr]); +} + +/* + * Oprofile is expected to collect data on all CPUs simultaneously. + * However, there is one set of performance counters per node. There are + * two hardware threads or virtual CPUs on each node. Hence, OProfile must + * multiplex in time the performance counter collection on the two virtual + * CPUs. The multiplexing of the performance counters is done by this + * virtual counter routine. + * + * The pmc_values used below is defined as 'per-cpu' but its use is + * more akin to 'per-node'. We need to store two sets of counter + * values per node -- one for the previous run and one for the next. + * The per-cpu[NR_PHYS_CTRS] gives us the storage we need. Each odd/even + * pair of per-cpu arrays is used for storing the previous and next + * pmc values for a given node. + * NOTE: We use the per-cpu variable to improve cache performance. + */ +static void cell_virtual_cntr(unsigned long data) +{ + /* This routine will alternate loading the virtual counters for + * virtual CPUs + */ + int i, prev_hdw_thread, next_hdw_thread; + u32 cpu; + unsigned long flags; + + /* Make sure that the interrupt_hander and + * the virt counter are not both playing with + * the counters on the same node. + */ + + spin_lock_irqsave(&virt_cntr_lock, flags); + + prev_hdw_thread = hdw_thread; + + /* switch the cpu handling the interrupts */ + hdw_thread = 1 ^ hdw_thread; + next_hdw_thread = hdw_thread; + + /* The following is done only once per each node, but + * we need cpu #, not node #, to pass to the cbe_xxx functions. + */ + for_each_online_cpu(cpu) { + if (cbe_get_hw_thread_id(cpu)) + continue; + + /* stop counters, save counter values, restore counts + * for previous thread + */ + cbe_disable_pm(cpu); + cbe_disable_pm_interrupts(cpu); + for (i = 0; i < num_counters; i++) { + per_cpu(pmc_values, cpu + prev_hdw_thread)[i] + = cbe_read_ctr(cpu, i); + + if (per_cpu(pmc_values, cpu + next_hdw_thread)[i] + == 0xFFFFFFFF) + /* If the cntr value is 0xffffffff, we must + * reset that to 0xfffffff0 when the current + * thread is restarted. This will generate a new + * interrupt and make sure that we never restore + * the counters to the max value. If the counters + * were restored to the max value, they do not + * increment and no interrupts are generated. Hence + * no more samples will be collected on that cpu. + */ + cbe_write_ctr(cpu, i, 0xFFFFFFF0); + else + cbe_write_ctr(cpu, i, + per_cpu(pmc_values, + cpu + + next_hdw_thread)[i]); + } + + /* Switch to the other thread. Change the interrupt + * and control regs to be scheduled on the CPU + * corresponding to the thread to execute. + */ + for (i = 0; i < num_counters; i++) { + if (pmc_cntrl[next_hdw_thread][i].enabled) { + /* There are some per thread events. + * Must do the set event, enable_cntr + * for each cpu. + */ + set_pm_event(i, + pmc_cntrl[next_hdw_thread][i].evnts, + pmc_cntrl[next_hdw_thread][i].masks); + enable_ctr(cpu, i, + pm_regs.pm07_cntrl); + } else { + cbe_write_pm07_control(cpu, i, 0); + } + } + + /* Enable interrupts on the CPU thread that is starting */ + cbe_enable_pm_interrupts(cpu, next_hdw_thread, + virt_cntr_inter_mask); + cbe_enable_pm(cpu); + } + + spin_unlock_irqrestore(&virt_cntr_lock, flags); + + mod_timer(&timer_virt_cntr, jiffies + HZ / 10); +} + +static void start_virt_cntrs(void) +{ + init_timer(&timer_virt_cntr); + timer_virt_cntr.function = cell_virtual_cntr; + timer_virt_cntr.data = 0UL; + timer_virt_cntr.expires = jiffies + HZ / 10; + add_timer(&timer_virt_cntr); +} + +/* This function is called once for all cpus combined */ +static void +cell_reg_setup(struct op_counter_config *ctr, + struct op_system_config *sys, int num_ctrs) +{ + int i, j, cpu; + + pm_rtas_token = rtas_token("ibm,cbe-perftools"); + if (pm_rtas_token == RTAS_UNKNOWN_SERVICE) { + printk(KERN_WARNING "%s: RTAS_UNKNOWN_SERVICE\n", + __FUNCTION__); + goto out; + } + + num_counters = num_ctrs; + + pm_regs.group_control = 0; + pm_regs.debug_bus_control = 0; + + /* setup the pm_control register */ + memset(&pm_regs.pm_cntrl, 0, sizeof(struct pm_cntrl)); + pm_regs.pm_cntrl.stop_at_max = 1; + pm_regs.pm_cntrl.trace_mode = 0; + pm_regs.pm_cntrl.freeze = 1; + + set_count_mode(sys->enable_kernel, sys->enable_user, + &pm_regs.pm_cntrl); + + /* Setup the thread 0 events */ + for (i = 0; i < num_ctrs; ++i) { + + pmc_cntrl[0][i].evnts = ctr[i].event; + pmc_cntrl[0][i].masks = ctr[i].unit_mask; + pmc_cntrl[0][i].enabled = ctr[i].enabled; + pmc_cntrl[0][i].vcntr = i; + + for_each_possible_cpu(j) + per_cpu(pmc_values, j)[i] = 0; + } + + /* Setup the thread 1 events, map the thread 0 event to the + * equivalent thread 1 event. + */ + for (i = 0; i < num_ctrs; ++i) { + if ((ctr[i].event >= 2100) && (ctr[i].event <= 2111)) + pmc_cntrl[1][i].evnts = ctr[i].event + 19; + else if (ctr[i].event == 2203) + pmc_cntrl[1][i].evnts = ctr[i].event; + else if ((ctr[i].event >= 2200) && (ctr[i].event <= 2215)) + pmc_cntrl[1][i].evnts = ctr[i].event + 16; + else + pmc_cntrl[1][i].evnts = ctr[i].event; + + pmc_cntrl[1][i].masks = ctr[i].unit_mask; + pmc_cntrl[1][i].enabled = ctr[i].enabled; + pmc_cntrl[1][i].vcntr = i; + } + + for (i = 0; i < 4; i++) + trace_bus[i] = 0xff; + + for (i = 0; i < 2; i++) + input_bus[i] = 0xff; + + /* Our counters count up, and "count" refers to + * how much before the next interrupt, and we interrupt + * on overflow. So we calculate the starting value + * which will give us "count" until overflow. + * Then we set the events on the enabled counters. + */ + for (i = 0; i < num_counters; ++i) { + /* start with virtual counter set 0 */ + if (pmc_cntrl[0][i].enabled) { + /* Using 32bit counters, reset max - count */ + reset_value[i] = 0xFFFFFFFF - ctr[i].count; + set_pm_event(i, + pmc_cntrl[0][i].evnts, + pmc_cntrl[0][i].masks); + + /* global, used by cell_cpu_setup */ + ctr_enabled |= (1 << i); + } + } + + /* initialize the previous counts for the virtual cntrs */ + for_each_online_cpu(cpu) + for (i = 0; i < num_counters; ++i) { + per_cpu(pmc_values, cpu)[i] = reset_value[i]; + } +out: + ; +} + +/* This function is called once for each cpu */ +static void cell_cpu_setup(struct op_counter_config *cntr) +{ + u32 cpu = smp_processor_id(); + u32 num_enabled = 0; + int i; + + /* There is one performance monitor per processor chip (i.e. node), + * so we only need to perform this function once per node. + */ + if (cbe_get_hw_thread_id(cpu)) + goto out; + + if (pm_rtas_token == RTAS_UNKNOWN_SERVICE) { + printk(KERN_WARNING "%s: RTAS_UNKNOWN_SERVICE\n", + __FUNCTION__); + goto out; + } + + /* Stop all counters */ + cbe_disable_pm(cpu); + cbe_disable_pm_interrupts(cpu); + + cbe_write_pm(cpu, pm_interval, 0); + cbe_write_pm(cpu, pm_start_stop, 0); + cbe_write_pm(cpu, group_control, pm_regs.group_control); + cbe_write_pm(cpu, debug_bus_control, pm_regs.debug_bus_control); + write_pm_cntrl(cpu, &pm_regs.pm_cntrl); + + for (i = 0; i < num_counters; ++i) { + if (ctr_enabled & (1 << i)) { + pm_signal[num_enabled].cpu = cbe_cpu_to_node(cpu); + num_enabled++; + } + } + + pm_rtas_activate_signals(cbe_cpu_to_node(cpu), num_enabled); +out: + ; +} + +static void cell_global_start(struct op_counter_config *ctr) +{ + u32 cpu; + u32 interrupt_mask = 0; + u32 i; + + /* This routine gets called once for the system. + * There is one performance monitor per node, so we + * only need to perform this function once per node. + */ + for_each_online_cpu(cpu) { + if (cbe_get_hw_thread_id(cpu)) + continue; + + interrupt_mask = 0; + + for (i = 0; i < num_counters; ++i) { + if (ctr_enabled & (1 << i)) { + cbe_write_ctr(cpu, i, reset_value[i]); + enable_ctr(cpu, i, pm_regs.pm07_cntrl); + interrupt_mask |= + CBE_PM_CTR_OVERFLOW_INTR(i); + } else { + /* Disable counter */ + cbe_write_pm07_control(cpu, i, 0); + } + } + + cbe_clear_pm_interrupts(cpu); + cbe_enable_pm_interrupts(cpu, hdw_thread, interrupt_mask); + cbe_enable_pm(cpu); + } + + virt_cntr_inter_mask = interrupt_mask; + oprofile_running = 1; + smp_wmb(); + + /* NOTE: start_virt_cntrs will result in cell_virtual_cntr() being + * executed which manipulates the PMU. We start the "virtual counter" + * here so that we do not need to synchronize access to the PMU in + * the above for-loop. + */ + start_virt_cntrs(); +} + +static void cell_global_stop(void) +{ + int cpu; + + /* This routine will be called once for the system. + * There is one performance monitor per node, so we + * only need to perform this function once per node. + */ + del_timer_sync(&timer_virt_cntr); + oprofile_running = 0; + smp_wmb(); + + for_each_online_cpu(cpu) { + if (cbe_get_hw_thread_id(cpu)) + continue; + + cbe_sync_irq(cbe_cpu_to_node(cpu)); + /* Stop the counters */ + cbe_disable_pm(cpu); + + /* Deactivate the signals */ + pm_rtas_reset_signals(cbe_cpu_to_node(cpu)); + + /* Deactivate interrupts */ + cbe_disable_pm_interrupts(cpu); + } +} + +static void +cell_handle_interrupt(struct pt_regs *regs, struct op_counter_config *ctr) +{ + u32 cpu; + u64 pc; + int is_kernel; + unsigned long flags = 0; + u32 interrupt_mask; + int i; + + cpu = smp_processor_id(); + + /* Need to make sure the interrupt handler and the virt counter + * routine are not running at the same time. See the + * cell_virtual_cntr() routine for additional comments. + */ + spin_lock_irqsave(&virt_cntr_lock, flags); + + /* Need to disable and reenable the performance counters + * to get the desired behavior from the hardware. This + * is hardware specific. + */ + + cbe_disable_pm(cpu); + + interrupt_mask = cbe_clear_pm_interrupts(cpu); + + /* If the interrupt mask has been cleared, then the virt cntr + * has cleared the interrupt. When the thread that generated + * the interrupt is restored, the data count will be restored to + * 0xffffff0 to cause the interrupt to be regenerated. + */ + + if ((oprofile_running == 1) && (interrupt_mask != 0)) { + pc = regs->nip; + is_kernel = is_kernel_addr(pc); + + for (i = 0; i < num_counters; ++i) { + if ((interrupt_mask & CBE_PM_CTR_OVERFLOW_INTR(i)) + && ctr[i].enabled) { + oprofile_add_pc(pc, is_kernel, i); + cbe_write_ctr(cpu, i, reset_value[i]); + } + } + + /* The counters were frozen by the interrupt. + * Reenable the interrupt and restart the counters. + * If there was a race between the interrupt handler and + * the virtual counter routine. The virutal counter + * routine may have cleared the interrupts. Hence must + * use the virt_cntr_inter_mask to re-enable the interrupts. + */ + cbe_enable_pm_interrupts(cpu, hdw_thread, + virt_cntr_inter_mask); + + /* The writes to the various performance counters only writes + * to a latch. The new values (interrupt setting bits, reset + * counter value etc.) are not copied to the actual registers + * until the performance monitor is enabled. In order to get + * this to work as desired, the permormance monitor needs to + * be disabled while writting to the latches. This is a + * HW design issue. + */ + cbe_enable_pm(cpu); + } + spin_unlock_irqrestore(&virt_cntr_lock, flags); +} + +struct op_powerpc_model op_model_cell = { + .reg_setup = cell_reg_setup, + .cpu_setup = cell_cpu_setup, + .global_start = cell_global_start, + .global_stop = cell_global_stop, + .handle_interrupt = cell_handle_interrupt, +}; diff --git a/arch/powerpc/platforms/cell/cbe_regs.c b/arch/powerpc/platforms/cell/cbe_regs.c index 5a91b75c2f0..9a0ee62691d 100644 --- a/arch/powerpc/platforms/cell/cbe_regs.c +++ b/arch/powerpc/platforms/cell/cbe_regs.c @@ -130,6 +130,18 @@ struct cbe_mic_tm_regs __iomem *cbe_get_cpu_mic_tm_regs(int cpu) } EXPORT_SYMBOL_GPL(cbe_get_cpu_mic_tm_regs); +/* FIXME + * This is little more than a stub at the moment. It should be + * fleshed out so that it works for both SMT and non-SMT, no + * matter if the passed cpu is odd or even. + * For SMT enabled, returns 0 for even-numbered cpu; otherwise 1. + * For SMT disabled, returns 0 for all cpus. + */ +u32 cbe_get_hw_thread_id(int cpu) +{ + return (cpu & 1); +} +EXPORT_SYMBOL_GPL(cbe_get_hw_thread_id); void __init cbe_regs_init(void) { diff --git a/arch/powerpc/platforms/cell/pmu.c b/arch/powerpc/platforms/cell/pmu.c index f28abf2fc27..99c612025e8 100644 --- a/arch/powerpc/platforms/cell/pmu.c +++ b/arch/powerpc/platforms/cell/pmu.c @@ -25,6 +25,7 @@ #include #include #include +#include #include #include #include @@ -375,9 +376,9 @@ void cbe_disable_pm_interrupts(u32 cpu) } EXPORT_SYMBOL_GPL(cbe_disable_pm_interrupts); -static irqreturn_t cbe_pm_irq(int irq, void *dev_id, struct pt_regs *regs) +static irqreturn_t cbe_pm_irq(int irq, void *dev_id) { - perf_irq(regs); + perf_irq(get_irq_regs()); return IRQ_HANDLED; } @@ -408,3 +409,21 @@ int __init cbe_init_pm_irq(void) } arch_initcall(cbe_init_pm_irq); +void cbe_sync_irq(int node) +{ + unsigned int irq; + + irq = irq_find_mapping(NULL, + IIC_IRQ_IOEX_PMI + | (node << IIC_IRQ_NODE_SHIFT)); + + if (irq == NO_IRQ) { + printk(KERN_WARNING "ERROR, unable to get existing irq %d " \ + "for node %d\n", irq, node); + return; + } + + synchronize_irq(irq); +} +EXPORT_SYMBOL_GPL(cbe_sync_irq); + diff --git a/include/asm-powerpc/cell-pmu.h b/include/asm-powerpc/cell-pmu.h index 63037c352fd..e8c2ebd3ddd 100644 --- a/include/asm-powerpc/cell-pmu.h +++ b/include/asm-powerpc/cell-pmu.h @@ -91,5 +91,23 @@ extern void cbe_enable_pm_interrupts(u32 cpu, u32 thread, u32 mask); extern void cbe_disable_pm_interrupts(u32 cpu); extern u32 cbe_query_pm_interrupts(u32 cpu); extern u32 cbe_clear_pm_interrupts(u32 cpu); +extern void cbe_sync_irq(int node); + +/* Utility functions, macros */ +extern u32 cbe_get_hw_thread_id(int cpu); + +#define cbe_cpu_to_node(cpu) ((cpu) >> 1) + +#define CBE_COUNT_SUPERVISOR_MODE 0 +#define CBE_COUNT_HYPERVISOR_MODE 1 +#define CBE_COUNT_PROBLEM_MODE 2 +#define CBE_COUNT_ALL_MODES 3 + +/* Macros for the pm07_control registers. */ +#define PM07_CTR_INPUT_MUX(x) (((x) & 0x3F) << 26) +#define PM07_CTR_INPUT_CONTROL(x) (((x) & 1) << 25) +#define PM07_CTR_POLARITY(x) (((x) & 1) << 24) +#define PM07_CTR_COUNT_CYCLES(x) (((x) & 1) << 23) +#define PM07_CTR_ENABLE(x) (((x) & 1) << 22) #endif /* __ASM_CELL_PMU_H__ */ diff --git a/include/asm-powerpc/cputable.h b/include/asm-powerpc/cputable.h index a9a40149a7c..762d15e4887 100644 --- a/include/asm-powerpc/cputable.h +++ b/include/asm-powerpc/cputable.h @@ -45,6 +45,7 @@ enum powerpc_oprofile_type { PPC_OPROFILE_POWER4 = 2, PPC_OPROFILE_G4 = 3, PPC_OPROFILE_BOOKE = 4, + PPC_OPROFILE_CELL = 5, }; struct cpu_spec { diff --git a/include/asm-powerpc/oprofile_impl.h b/include/asm-powerpc/oprofile_impl.h index 07a10e590c1..71043bf3641 100644 --- a/include/asm-powerpc/oprofile_impl.h +++ b/include/asm-powerpc/oprofile_impl.h @@ -44,7 +44,9 @@ struct op_powerpc_model { int num_counters); void (*cpu_setup) (struct op_counter_config *); void (*start) (struct op_counter_config *); + void (*global_start) (struct op_counter_config *); void (*stop) (void); + void (*global_stop) (void); void (*handle_interrupt) (struct pt_regs *, struct op_counter_config *); int num_counters; @@ -54,6 +56,7 @@ extern struct op_powerpc_model op_model_fsl_booke; extern struct op_powerpc_model op_model_rs64; extern struct op_powerpc_model op_model_power4; extern struct op_powerpc_model op_model_7450; +extern struct op_powerpc_model op_model_cell; #ifndef CONFIG_FSL_BOOKE -- cgit v1.2.3-70-g09d2 From 974a76f51355d22f4f63d83d6bb1ccecd019ec58 Mon Sep 17 00:00:00 2001 From: Paul Mackerras Date: Fri, 10 Nov 2006 20:38:53 +1100 Subject: [POWERPC] Distinguish POWER6 partition modes and tell userspace This adds code to look at the properties firmware puts in the device tree to determine what compatibility mode the partition is in on POWER6 machines, and set the ELF aux vector AT_HWCAP and AT_PLATFORM entries appropriately. Specifically, we look at the cpu-version property in the cpu node(s). If that contains a "logical" PVR value (of the form 0x0f00000x), we call identify_cpu again with this PVR value. A value of 0x0f000001 indicates the partition is in POWER5+ compatibility mode, and a value of 0x0f000002 indicates "POWER6 architected" mode, with various extensions disabled. We also look for various other properties: ibm,dfp, ibm,purr and ibm,spurr. Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/cputable.c | 43 +++++++++++-- arch/powerpc/kernel/prom.c | 110 +++++++++++++++++++++++---------- arch/powerpc/kernel/prom_init.c | 3 +- arch/powerpc/kernel/setup_32.c | 2 +- arch/powerpc/kernel/setup_64.c | 2 +- arch/powerpc/platforms/iseries/setup.c | 2 +- arch/ppc/kernel/setup.c | 2 +- include/asm-powerpc/cputable.h | 13 +++- 8 files changed, 130 insertions(+), 47 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c index 992121b2d26..911ac442f44 100644 --- a/arch/powerpc/kernel/cputable.c +++ b/arch/powerpc/kernel/cputable.c @@ -277,10 +277,45 @@ static struct cpu_spec cpu_specs[] = { .oprofile_mmcra_sipr = MMCRA_SIPR, .platform = "power5+", }, + { /* POWER6 in P5+ mode; 2.04-compliant processor */ + .pvr_mask = 0xffffffff, + .pvr_value = 0x0f000001, + .cpu_name = "POWER5+", + .cpu_features = CPU_FTRS_POWER5, + .cpu_user_features = COMMON_USER_POWER5_PLUS, + .icache_bsize = 128, + .dcache_bsize = 128, + .num_pmcs = 6, + .oprofile_cpu_type = "ppc64/power6", + .oprofile_type = PPC_OPROFILE_POWER4, + .oprofile_mmcra_sihv = POWER6_MMCRA_SIHV, + .oprofile_mmcra_sipr = POWER6_MMCRA_SIPR, + .oprofile_mmcra_clear = POWER6_MMCRA_THRM | + POWER6_MMCRA_OTHER, + .platform = "power5+", + }, { /* Power6 */ .pvr_mask = 0xffff0000, .pvr_value = 0x003e0000, - .cpu_name = "POWER6", + .cpu_name = "POWER6 (raw)", + .cpu_features = CPU_FTRS_POWER6, + .cpu_user_features = COMMON_USER_POWER6 | + PPC_FEATURE_POWER6_EXT, + .icache_bsize = 128, + .dcache_bsize = 128, + .num_pmcs = 6, + .oprofile_cpu_type = "ppc64/power6", + .oprofile_type = PPC_OPROFILE_POWER4, + .oprofile_mmcra_sihv = POWER6_MMCRA_SIHV, + .oprofile_mmcra_sipr = POWER6_MMCRA_SIPR, + .oprofile_mmcra_clear = POWER6_MMCRA_THRM | + POWER6_MMCRA_OTHER, + .platform = "power6x", + }, + { /* 2.05-compliant processor, i.e. Power6 "architected" mode */ + .pvr_mask = 0xffffffff, + .pvr_value = 0x0f000002, + .cpu_name = "POWER6 (architected)", .cpu_features = CPU_FTRS_POWER6, .cpu_user_features = COMMON_USER_POWER6, .icache_bsize = 128, @@ -1173,19 +1208,15 @@ static struct cpu_spec cpu_specs[] = { #endif /* CONFIG_PPC32 */ }; -struct cpu_spec *identify_cpu(unsigned long offset) +struct cpu_spec *identify_cpu(unsigned long offset, unsigned int pvr) { struct cpu_spec *s = cpu_specs; struct cpu_spec **cur = &cur_cpu_spec; - unsigned int pvr = mfspr(SPRN_PVR); int i; s = PTRRELOC(s); cur = PTRRELOC(cur); - if (*cur != NULL) - return PTRRELOC(*cur); - for (i = 0; i < ARRAY_SIZE(cpu_specs); i++,s++) if ((pvr & s->pvr_mask) == s->pvr_value) { *cur = cpu_specs + i; diff --git a/arch/powerpc/kernel/prom.c b/arch/powerpc/kernel/prom.c index 16d29d16b96..c18dbe77fdc 100644 --- a/arch/powerpc/kernel/prom.c +++ b/arch/powerpc/kernel/prom.c @@ -538,35 +538,31 @@ static struct ibm_pa_feature { {CPU_FTR_REAL_LE, PPC_FEATURE_TRUE_LE, 5, 0, 0}, }; -static void __init check_cpu_pa_features(unsigned long node) +static void __init scan_features(unsigned long node, unsigned char *ftrs, + unsigned long tablelen, + struct ibm_pa_feature *fp, + unsigned long ft_size) { - unsigned char *pa_ftrs; - unsigned long len, tablelen, i, bit; - - pa_ftrs = of_get_flat_dt_prop(node, "ibm,pa-features", &tablelen); - if (pa_ftrs == NULL) - return; + unsigned long i, len, bit; /* find descriptor with type == 0 */ for (;;) { if (tablelen < 3) return; - len = 2 + pa_ftrs[0]; + len = 2 + ftrs[0]; if (tablelen < len) return; /* descriptor 0 not found */ - if (pa_ftrs[1] == 0) + if (ftrs[1] == 0) break; tablelen -= len; - pa_ftrs += len; + ftrs += len; } /* loop over bits we know about */ - for (i = 0; i < ARRAY_SIZE(ibm_pa_features); ++i) { - struct ibm_pa_feature *fp = &ibm_pa_features[i]; - - if (fp->pabyte >= pa_ftrs[0]) + for (i = 0; i < ft_size; ++i, ++fp) { + if (fp->pabyte >= ftrs[0]) continue; - bit = (pa_ftrs[2 + fp->pabyte] >> (7 - fp->pabit)) & 1; + bit = (ftrs[2 + fp->pabyte] >> (7 - fp->pabit)) & 1; if (bit ^ fp->invert) { cur_cpu_spec->cpu_features |= fp->cpu_features; cur_cpu_spec->cpu_user_features |= fp->cpu_user_ftrs; @@ -577,16 +573,59 @@ static void __init check_cpu_pa_features(unsigned long node) } } +static void __init check_cpu_pa_features(unsigned long node) +{ + unsigned char *pa_ftrs; + unsigned long tablelen; + + pa_ftrs = of_get_flat_dt_prop(node, "ibm,pa-features", &tablelen); + if (pa_ftrs == NULL) + return; + + scan_features(node, pa_ftrs, tablelen, + ibm_pa_features, ARRAY_SIZE(ibm_pa_features)); +} + +static struct feature_property { + const char *name; + u32 min_value; + unsigned long cpu_feature; + unsigned long cpu_user_ftr; +} feature_properties[] __initdata = { +#ifdef CONFIG_ALTIVEC + {"altivec", 0, CPU_FTR_ALTIVEC, PPC_FEATURE_HAS_ALTIVEC}, + {"ibm,vmx", 1, CPU_FTR_ALTIVEC, PPC_FEATURE_HAS_ALTIVEC}, +#endif /* CONFIG_ALTIVEC */ +#ifdef CONFIG_PPC64 + {"ibm,dfp", 1, 0, PPC_FEATURE_HAS_DFP}, + {"ibm,purr", 1, CPU_FTR_PURR, 0}, + {"ibm,spurr", 1, CPU_FTR_SPURR, 0}, +#endif /* CONFIG_PPC64 */ +}; + +static void __init check_cpu_feature_properties(unsigned long node) +{ + unsigned long i; + struct feature_property *fp = feature_properties; + const u32 *prop; + + for (i = 0; i < ARRAY_SIZE(feature_properties); ++i, ++fp) { + prop = of_get_flat_dt_prop(node, fp->name, NULL); + if (prop && *prop >= fp->min_value) { + cur_cpu_spec->cpu_features |= fp->cpu_feature; + cur_cpu_spec->cpu_user_features |= fp->cpu_user_ftr; + } + } +} + static int __init early_init_dt_scan_cpus(unsigned long node, const char *uname, int depth, void *data) { static int logical_cpuid = 0; char *type = of_get_flat_dt_prop(node, "device_type", NULL); -#ifdef CONFIG_ALTIVEC - u32 *prop; -#endif - u32 *intserv; + const u32 *prop; + const u32 *intserv; int i, nthreads; unsigned long len; int found = 0; @@ -643,24 +682,27 @@ static int __init early_init_dt_scan_cpus(unsigned long node, intserv[i]); boot_cpuid = logical_cpuid; set_hard_smp_processor_id(boot_cpuid, intserv[i]); - } -#ifdef CONFIG_ALTIVEC - /* Check if we have a VMX and eventually update CPU features */ - prop = (u32 *)of_get_flat_dt_prop(node, "ibm,vmx", NULL); - if (prop && (*prop) > 0) { - cur_cpu_spec->cpu_features |= CPU_FTR_ALTIVEC; - cur_cpu_spec->cpu_user_features |= PPC_FEATURE_HAS_ALTIVEC; - } - - /* Same goes for Apple's "altivec" property */ - prop = (u32 *)of_get_flat_dt_prop(node, "altivec", NULL); - if (prop) { - cur_cpu_spec->cpu_features |= CPU_FTR_ALTIVEC; - cur_cpu_spec->cpu_user_features |= PPC_FEATURE_HAS_ALTIVEC; + /* + * PAPR defines "logical" PVR values for cpus that + * meet various levels of the architecture: + * 0x0f000001 Architecture version 2.04 + * 0x0f000002 Architecture version 2.05 + * If the cpu-version property in the cpu node contains + * such a value, we call identify_cpu again with the + * logical PVR value in order to use the cpu feature + * bits appropriate for the architecture level. + * + * A POWER6 partition in "POWER6 architected" mode + * uses the 0x0f000002 PVR value; in POWER5+ mode + * it uses 0x0f000001. + */ + prop = of_get_flat_dt_prop(node, "cpu-version", NULL); + if (prop && (*prop & 0xff000000) == 0x0f000000) + identify_cpu(0, *prop); } -#endif /* CONFIG_ALTIVEC */ + check_cpu_feature_properties(node); check_cpu_pa_features(node); #ifdef CONFIG_PPC_PSERIES diff --git a/arch/powerpc/kernel/prom_init.c b/arch/powerpc/kernel/prom_init.c index 8671eb634a9..396109a537c 100644 --- a/arch/powerpc/kernel/prom_init.c +++ b/arch/powerpc/kernel/prom_init.c @@ -627,6 +627,7 @@ static void __init early_cmdline_parse(void) /* Option vector 3: processor options supported */ #define OV3_FP 0x80 /* floating point */ #define OV3_VMX 0x40 /* VMX/Altivec */ +#define OV3_DFP 0x20 /* decimal FP */ /* Option vector 5: PAPR/OF options supported */ #define OV5_LPAR 0x80 /* logical partitioning supported */ @@ -668,7 +669,7 @@ static unsigned char ibm_architecture_vec[] = { /* option vector 3: processor options supported */ 3 - 2, /* length */ 0, /* don't ignore, don't halt */ - OV3_FP | OV3_VMX, + OV3_FP | OV3_VMX | OV3_DFP, /* option vector 4: IBM PAPR implementation */ 2 - 2, /* length */ diff --git a/arch/powerpc/kernel/setup_32.c b/arch/powerpc/kernel/setup_32.c index 04df53a3c86..61c65d19ef0 100644 --- a/arch/powerpc/kernel/setup_32.c +++ b/arch/powerpc/kernel/setup_32.c @@ -97,7 +97,7 @@ unsigned long __init early_init(unsigned long dt_ptr) * Identify the CPU type and fix up code sections * that depend on which cpu we have. */ - spec = identify_cpu(offset); + spec = identify_cpu(offset, mfspr(SPRN_PVR)); do_feature_fixups(spec->cpu_features, PTRRELOC(&__start___ftr_fixup), diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c index f602a53b1b7..3733de30e84 100644 --- a/arch/powerpc/kernel/setup_64.c +++ b/arch/powerpc/kernel/setup_64.c @@ -171,7 +171,7 @@ void __init setup_paca(int cpu) void __init early_setup(unsigned long dt_ptr) { /* Identify CPU type */ - identify_cpu(0); + identify_cpu(0, mfspr(SPRN_PVR)); /* Assume we're on cpu 0 for now. Don't write to the paca yet! */ setup_paca(0); diff --git a/arch/powerpc/platforms/iseries/setup.c b/arch/powerpc/platforms/iseries/setup.c index 0f39bdbbf91..1796644ec7d 100644 --- a/arch/powerpc/platforms/iseries/setup.c +++ b/arch/powerpc/platforms/iseries/setup.c @@ -677,7 +677,7 @@ void * __init iSeries_early_setup(void) /* Identify CPU type. This is done again by the common code later * on but calling this function multiple times is fine. */ - identify_cpu(0); + identify_cpu(0, mfspr(SPRN_PVR)); powerpc_firmware_features |= FW_FEATURE_ISERIES; powerpc_firmware_features |= FW_FEATURE_LPAR; diff --git a/arch/ppc/kernel/setup.c b/arch/ppc/kernel/setup.c index 27faeca2c7a..3c506af1988 100644 --- a/arch/ppc/kernel/setup.c +++ b/arch/ppc/kernel/setup.c @@ -313,7 +313,7 @@ early_init(int r3, int r4, int r5) * Identify the CPU type and fix up code sections * that depend on which cpu we have. */ - spec = identify_cpu(offset); + spec = identify_cpu(offset, mfspr(SPRN_PVR)); do_feature_fixups(spec->cpu_features, PTRRELOC(&__start___ftr_fixup), PTRRELOC(&__stop___ftr_fixup)); diff --git a/include/asm-powerpc/cputable.h b/include/asm-powerpc/cputable.h index 762d15e4887..d06222a5be5 100644 --- a/include/asm-powerpc/cputable.h +++ b/include/asm-powerpc/cputable.h @@ -24,6 +24,8 @@ #define PPC_FEATURE_ICACHE_SNOOP 0x00002000 #define PPC_FEATURE_ARCH_2_05 0x00001000 #define PPC_FEATURE_PA6T 0x00000800 +#define PPC_FEATURE_HAS_DFP 0x00000400 +#define PPC_FEATURE_POWER6_EXT 0x00000200 #define PPC_FEATURE_TRUE_LE 0x00000002 #define PPC_FEATURE_PPC_LE 0x00000001 @@ -92,7 +94,7 @@ extern struct cpu_spec *cur_cpu_spec; extern unsigned int __start___ftr_fixup, __stop___ftr_fixup; -extern struct cpu_spec *identify_cpu(unsigned long offset); +extern struct cpu_spec *identify_cpu(unsigned long offset, unsigned int pvr); extern void do_feature_fixups(unsigned long value, void *fixup_start, void *fixup_end); @@ -149,6 +151,7 @@ extern void do_feature_fixups(unsigned long value, void *fixup_start, #define CPU_FTR_PAUSE_ZERO LONG_ASM_CONST(0x0000200000000000) #define CPU_FTR_PURR LONG_ASM_CONST(0x0000400000000000) #define CPU_FTR_CELL_TB_BUG LONG_ASM_CONST(0x0000800000000000) +#define CPU_FTR_SPURR LONG_ASM_CONST(0x0001000000000000) #ifndef __ASSEMBLY__ @@ -333,7 +336,13 @@ extern void do_feature_fixups(unsigned long value, void *fixup_start, CPU_FTR_HPTE_TABLE | CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_CTRL | \ CPU_FTR_MMCRA | CPU_FTR_SMT | \ CPU_FTR_COHERENT_ICACHE | CPU_FTR_LOCKLESS_TLBIE | \ - CPU_FTR_PURR | CPU_FTR_CI_LARGE_PAGE | CPU_FTR_REAL_LE) + CPU_FTR_PURR | CPU_FTR_SPURR | CPU_FTR_REAL_LE) +#define CPU_FTRS_POWER6X (CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB | \ + CPU_FTR_HPTE_TABLE | CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_CTRL | \ + CPU_FTR_MMCRA | CPU_FTR_SMT | \ + CPU_FTR_COHERENT_ICACHE | CPU_FTR_LOCKLESS_TLBIE | \ + CPU_FTR_PURR | CPU_FTR_CI_LARGE_PAGE | \ + CPU_FTR_SPURR | CPU_FTR_REAL_LE) #define CPU_FTRS_CELL (CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB | \ CPU_FTR_HPTE_TABLE | CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_CTRL | \ CPU_FTR_ALTIVEC_COMP | CPU_FTR_MMCRA | CPU_FTR_SMT | \ -- cgit v1.2.3-70-g09d2 From 9309180f11f0107c9858a61a1ac2b04518a91080 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Tue, 21 Nov 2006 14:56:37 +1100 Subject: [POWERPC] powerpc: Workaround for of_platform without "reg" nor "dcr-reg" Devices with no "reg" nor "dcr-reg" property are given a bus_id which is the node name alone. This means that if more than one such device with the same names are present in the system, sysfs will have collisions when creating the symlinks and will fail registering the devices. This works around that problem by assigning successive numbers to such devices. Signed-off-by: Benjamin Herrenschmidt Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/of_platform.c | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/kernel/of_platform.c b/arch/powerpc/kernel/of_platform.c index 6029543c1b5..b3189d0161b 100644 --- a/arch/powerpc/kernel/of_platform.c +++ b/arch/powerpc/kernel/of_platform.c @@ -27,6 +27,8 @@ #include #include #include +#include + /* * The list of OF IDs below is used for matching bus types in the @@ -51,6 +53,8 @@ static struct of_device_id of_default_bus_ids[] = { {}, }; +static atomic_t bus_no_reg_magic; + /* * * OF platform device type definition & base infrastructure @@ -165,6 +169,7 @@ static void of_platform_make_bus_id(struct of_device *dev) char *name = dev->dev.bus_id; const u32 *reg; u64 addr; + long magic; /* * If it's a DCR based device, use 'd' for native DCRs @@ -203,9 +208,11 @@ static void of_platform_make_bus_id(struct of_device *dev) } /* - * No BusID, use the node name and pray + * No BusID, use the node name and add a globally incremented + * counter (and pray...) */ - snprintf(name, BUS_ID_SIZE, "%s", node->name); + magic = atomic_add_return(1, &bus_no_reg_magic); + snprintf(name, BUS_ID_SIZE, "%s.%d", node->name, magic - 1); } struct of_device* of_platform_device_create(struct device_node *np, -- cgit v1.2.3-70-g09d2 From bf1ab978be2318c5a564de9aa0f1a217b44170d4 Mon Sep 17 00:00:00 2001 From: Dwayne Grant McConnell Date: Thu, 23 Nov 2006 00:46:37 +0100 Subject: [POWERPC] coredump: Add SPU elf notes to coredump. This patch adds SPU elf notes to the coredump. It creates a separate note for each of /regs, /fpcr, /lslr, /decr, /decr_status, /mem, /signal1, /signal1_type, /signal2, /signal2_type, /event_mask, /event_status, /mbox_info, /ibox_info, /wbox_info, /dma_info, /proxydma_info, /object-id. A new macro, ARCH_HAVE_EXTRA_NOTES, was created for architectures to specify they have extra elf core notes. A new macro, ELF_CORE_EXTRA_NOTES_SIZE, was created so the size of the additional notes could be calculated and added to the notes phdr entry. A new macro, ELF_CORE_WRITE_EXTRA_NOTES, was created so the new notes would be written after the existing notes. The SPU coredump code resides in spufs. Stub functions are provided in the kernel which are hooked into the spufs code which does the actual work via register_arch_coredump_calls(). A new set of __spufs__read/get() functions was provided to allow the coredump code to read from the spufs files without having to lock the SPU context for each file read from. Cc: Signed-off-by: Dwayne Grant McConnell Signed-off-by: Arnd Bergmann --- arch/powerpc/platforms/cell/Makefile | 1 + arch/powerpc/platforms/cell/spu_coredump.c | 81 +++++++ arch/powerpc/platforms/cell/spufs/Makefile | 2 +- arch/powerpc/platforms/cell/spufs/coredump.c | 238 +++++++++++++++++++ arch/powerpc/platforms/cell/spufs/file.c | 327 ++++++++++++++++++++------- arch/powerpc/platforms/cell/spufs/inode.c | 7 + arch/powerpc/platforms/cell/spufs/spufs.h | 11 + fs/binfmt_elf.c | 8 + include/asm-powerpc/elf.h | 13 ++ include/asm-powerpc/spu.h | 10 + include/linux/elf.h | 7 + 11 files changed, 618 insertions(+), 87 deletions(-) create mode 100644 arch/powerpc/platforms/cell/spu_coredump.c create mode 100644 arch/powerpc/platforms/cell/spufs/coredump.c (limited to 'arch/powerpc') diff --git a/arch/powerpc/platforms/cell/Makefile b/arch/powerpc/platforms/cell/Makefile index 62c011e8092..f90e8337796 100644 --- a/arch/powerpc/platforms/cell/Makefile +++ b/arch/powerpc/platforms/cell/Makefile @@ -15,5 +15,6 @@ spufs-modular-$(CONFIG_SPU_FS) += spu_syscalls.o spu-priv1-$(CONFIG_PPC_CELL_NATIVE) += spu_priv1_mmio.o obj-$(CONFIG_SPU_BASE) += spu_callbacks.o spu_base.o \ + spu_coredump.o \ $(spufs-modular-m) \ $(spu-priv1-y) spufs/ diff --git a/arch/powerpc/platforms/cell/spu_coredump.c b/arch/powerpc/platforms/cell/spu_coredump.c new file mode 100644 index 00000000000..6915b418ee7 --- /dev/null +++ b/arch/powerpc/platforms/cell/spu_coredump.c @@ -0,0 +1,81 @@ +/* + * SPU core dump code + * + * (C) Copyright 2006 IBM Corp. + * + * Author: Dwayne Grant McConnell + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include +#include + +#include + +static struct spu_coredump_calls spu_coredump_calls; +static DEFINE_MUTEX(spu_coredump_mutex); + +int arch_notes_size(void) +{ + long ret; + struct module *owner = spu_coredump_calls.owner; + + ret = -ENOSYS; + mutex_lock(&spu_coredump_mutex); + if (owner && try_module_get(owner)) { + ret = spu_coredump_calls.arch_notes_size(); + module_put(owner); + } + mutex_unlock(&spu_coredump_mutex); + return ret; +} + +void arch_write_notes(struct file *file) +{ + struct module *owner = spu_coredump_calls.owner; + + mutex_lock(&spu_coredump_mutex); + if (owner && try_module_get(owner)) { + spu_coredump_calls.arch_write_notes(file); + module_put(owner); + } + mutex_unlock(&spu_coredump_mutex); +} + +int register_arch_coredump_calls(struct spu_coredump_calls *calls) +{ + if (spu_coredump_calls.owner) + return -EBUSY; + + mutex_lock(&spu_coredump_mutex); + spu_coredump_calls.arch_notes_size = calls->arch_notes_size; + spu_coredump_calls.arch_write_notes = calls->arch_write_notes; + spu_coredump_calls.owner = calls->owner; + mutex_unlock(&spu_coredump_mutex); + return 0; +} +EXPORT_SYMBOL_GPL(register_arch_coredump_calls); + +void unregister_arch_coredump_calls(struct spu_coredump_calls *calls) +{ + BUG_ON(spu_coredump_calls.owner != calls->owner); + + mutex_lock(&spu_coredump_mutex); + spu_coredump_calls.owner = NULL; + mutex_unlock(&spu_coredump_mutex); +} +EXPORT_SYMBOL_GPL(unregister_arch_coredump_calls); diff --git a/arch/powerpc/platforms/cell/spufs/Makefile b/arch/powerpc/platforms/cell/spufs/Makefile index ecdfbb35f82..472217d19fa 100644 --- a/arch/powerpc/platforms/cell/spufs/Makefile +++ b/arch/powerpc/platforms/cell/spufs/Makefile @@ -1,7 +1,7 @@ obj-y += switch.o obj-$(CONFIG_SPU_FS) += spufs.o -spufs-y += inode.o file.o context.o syscalls.o +spufs-y += inode.o file.o context.o syscalls.o coredump.o spufs-y += sched.o backing_ops.o hw_ops.o run.o gang.o # Rules to build switch.o with the help of SPU tool chain diff --git a/arch/powerpc/platforms/cell/spufs/coredump.c b/arch/powerpc/platforms/cell/spufs/coredump.c new file mode 100644 index 00000000000..26945c491f6 --- /dev/null +++ b/arch/powerpc/platforms/cell/spufs/coredump.c @@ -0,0 +1,238 @@ +/* + * SPU core dump code + * + * (C) Copyright 2006 IBM Corp. + * + * Author: Dwayne Grant McConnell + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include +#include +#include +#include +#include + +#include + +#include "spufs.h" + +struct spufs_ctx_info { + struct list_head list; + int dfd; + int memsize; /* in bytes */ + struct spu_context *ctx; +}; + +static LIST_HEAD(ctx_info_list); + +static ssize_t do_coredump_read(int num, struct spu_context *ctx, void __user *buffer, + size_t size, loff_t *off) +{ + u64 data; + int ret; + + if (spufs_coredump_read[num].read) + return spufs_coredump_read[num].read(ctx, buffer, size, off); + + data = spufs_coredump_read[num].get(ctx); + ret = copy_to_user(buffer, &data, 8); + return ret ? -EFAULT : 8; +} + +/* + * These are the only things you should do on a core-file: use only these + * functions to write out all the necessary info. + */ +static int spufs_dump_write(struct file *file, const void *addr, int nr) +{ + return file->f_op->write(file, addr, nr, &file->f_pos) == nr; +} + +static int spufs_dump_seek(struct file *file, loff_t off) +{ + if (file->f_op->llseek) { + if (file->f_op->llseek(file, off, 0) != off) + return 0; + } else + file->f_pos = off; + return 1; +} + +static void spufs_fill_memsize(struct spufs_ctx_info *ctx_info) +{ + struct spu_context *ctx; + unsigned long long lslr; + + ctx = ctx_info->ctx; + lslr = ctx->csa.priv2.spu_lslr_RW; + ctx_info->memsize = lslr + 1; +} + +static int spufs_ctx_note_size(struct spufs_ctx_info *ctx_info) +{ + int dfd, memsize, i, sz, total = 0; + char *name; + char fullname[80]; + + dfd = ctx_info->dfd; + memsize = ctx_info->memsize; + + for (i = 0; spufs_coredump_read[i].name; i++) { + name = spufs_coredump_read[i].name; + sz = spufs_coredump_read[i].size; + + sprintf(fullname, "SPU/%d/%s", dfd, name); + + total += sizeof(struct elf_note); + total += roundup(strlen(fullname) + 1, 4); + if (!strcmp(name, "mem")) + total += roundup(memsize, 4); + else + total += roundup(sz, 4); + } + + return total; +} + +static int spufs_add_one_context(struct file *file, int dfd) +{ + struct spu_context *ctx; + struct spufs_ctx_info *ctx_info; + int size; + + ctx = SPUFS_I(file->f_dentry->d_inode)->i_ctx; + if (ctx->flags & SPU_CREATE_NOSCHED) + return 0; + + ctx_info = kzalloc(sizeof(*ctx_info), GFP_KERNEL); + if (unlikely(!ctx_info)) + return -ENOMEM; + + ctx_info->dfd = dfd; + ctx_info->ctx = ctx; + + spufs_fill_memsize(ctx_info); + + size = spufs_ctx_note_size(ctx_info); + list_add(&ctx_info->list, &ctx_info_list); + return size; +} + +/* + * The additional architecture-specific notes for Cell are various + * context files in the spu context. + * + * This function iterates over all open file descriptors and sees + * if they are a directory in spufs. In that case we use spufs + * internal functionality to dump them without needing to actually + * open the files. + */ +static int spufs_arch_notes_size(void) +{ + struct fdtable *fdt = files_fdtable(current->files); + int size = 0, fd; + + for (fd = 0; fd < fdt->max_fdset && fd < fdt->max_fds; fd++) { + if (FD_ISSET(fd, fdt->open_fds)) { + struct file *file = fcheck(fd); + + if (file && file->f_op == &spufs_context_fops) { + int rval = spufs_add_one_context(file, fd); + if (rval < 0) + break; + size += rval; + } + } + } + + return size; +} + +static void spufs_arch_write_note(struct spufs_ctx_info *ctx_info, int i, + struct file *file) +{ + struct spu_context *ctx; + loff_t pos = 0; + int sz, dfd, rc, total = 0; + const int bufsz = 4096; + char *name; + char fullname[80], *buf; + struct elf_note en; + + buf = kmalloc(bufsz, GFP_KERNEL); + if (!buf) + return; + + dfd = ctx_info->dfd; + name = spufs_coredump_read[i].name; + + if (!strcmp(name, "mem")) + sz = ctx_info->memsize; + else + sz = spufs_coredump_read[i].size; + + ctx = ctx_info->ctx; + if (!ctx) { + return; + } + + sprintf(fullname, "SPU/%d/%s", dfd, name); + en.n_namesz = strlen(fullname) + 1; + en.n_descsz = sz; + en.n_type = NT_SPU; + + if (!spufs_dump_write(file, &en, sizeof(en))) + return; + if (!spufs_dump_write(file, fullname, en.n_namesz)) + return; + if (!spufs_dump_seek(file, roundup((unsigned long)file->f_pos, 4))) + return; + + do { + rc = do_coredump_read(i, ctx, buf, bufsz, &pos); + if (rc > 0) { + if (!spufs_dump_write(file, buf, rc)) + return; + total += rc; + } + } while (rc == bufsz && total < sz); + + spufs_dump_seek(file, roundup((unsigned long)file->f_pos + - total + sz, 4)); +} + +static void spufs_arch_write_notes(struct file *file) +{ + int j; + struct spufs_ctx_info *ctx_info, *next; + + list_for_each_entry_safe(ctx_info, next, &ctx_info_list, list) { + spu_acquire_saved(ctx_info->ctx); + for (j = 0; j < spufs_coredump_num_notes; j++) + spufs_arch_write_note(ctx_info, j, file); + spu_release(ctx_info->ctx); + list_del(&ctx_info->list); + kfree(ctx_info); + } +} + +struct spu_coredump_calls spufs_coredump_calls = { + .arch_notes_size = spufs_arch_notes_size, + .arch_write_notes = spufs_arch_write_notes, + .owner = THIS_MODULE, +}; diff --git a/arch/powerpc/platforms/cell/spufs/file.c b/arch/powerpc/platforms/cell/spufs/file.c index 50e0afc46ad..347eff56fcb 100644 --- a/arch/powerpc/platforms/cell/spufs/file.c +++ b/arch/powerpc/platforms/cell/spufs/file.c @@ -39,7 +39,6 @@ #define SPUFS_MMAP_4K (PAGE_SIZE == 0x1000) - static int spufs_mem_open(struct inode *inode, struct file *file) { @@ -51,19 +50,24 @@ spufs_mem_open(struct inode *inode, struct file *file) return 0; } +static ssize_t +__spufs_mem_read(struct spu_context *ctx, char __user *buffer, + size_t size, loff_t *pos) +{ + char *local_store = ctx->ops->get_ls(ctx); + return simple_read_from_buffer(buffer, size, pos, local_store, + LS_SIZE); +} + static ssize_t spufs_mem_read(struct file *file, char __user *buffer, size_t size, loff_t *pos) { - struct spu_context *ctx = file->private_data; - char *local_store; int ret; + struct spu_context *ctx = file->private_data; spu_acquire(ctx); - - local_store = ctx->ops->get_ls(ctx); - ret = simple_read_from_buffer(buffer, size, pos, local_store, LS_SIZE); - + ret = __spufs_mem_read(ctx, buffer, size, pos); spu_release(ctx); return ret; } @@ -261,19 +265,24 @@ spufs_regs_open(struct inode *inode, struct file *file) return 0; } +static ssize_t +__spufs_regs_read(struct spu_context *ctx, char __user *buffer, + size_t size, loff_t *pos) +{ + struct spu_lscsa *lscsa = ctx->csa.lscsa; + return simple_read_from_buffer(buffer, size, pos, + lscsa->gprs, sizeof lscsa->gprs); +} + static ssize_t spufs_regs_read(struct file *file, char __user *buffer, size_t size, loff_t *pos) { - struct spu_context *ctx = file->private_data; - struct spu_lscsa *lscsa = ctx->csa.lscsa; int ret; + struct spu_context *ctx = file->private_data; spu_acquire_saved(ctx); - - ret = simple_read_from_buffer(buffer, size, pos, - lscsa->gprs, sizeof lscsa->gprs); - + ret = __spufs_regs_read(ctx, buffer, size, pos); spu_release(ctx); return ret; } @@ -307,19 +316,24 @@ static struct file_operations spufs_regs_fops = { .llseek = generic_file_llseek, }; +static ssize_t +__spufs_fpcr_read(struct spu_context *ctx, char __user * buffer, + size_t size, loff_t * pos) +{ + struct spu_lscsa *lscsa = ctx->csa.lscsa; + return simple_read_from_buffer(buffer, size, pos, + &lscsa->fpcr, sizeof(lscsa->fpcr)); +} + static ssize_t spufs_fpcr_read(struct file *file, char __user * buffer, size_t size, loff_t * pos) { - struct spu_context *ctx = file->private_data; - struct spu_lscsa *lscsa = ctx->csa.lscsa; int ret; + struct spu_context *ctx = file->private_data; spu_acquire_saved(ctx); - - ret = simple_read_from_buffer(buffer, size, pos, - &lscsa->fpcr, sizeof(lscsa->fpcr)); - + ret = __spufs_fpcr_read(ctx, buffer, size, pos); spu_release(ctx); return ret; } @@ -719,22 +733,19 @@ static int spufs_signal1_open(struct inode *inode, struct file *file) return nonseekable_open(inode, file); } -static ssize_t spufs_signal1_read(struct file *file, char __user *buf, +static ssize_t __spufs_signal1_read(struct spu_context *ctx, char __user *buf, size_t len, loff_t *pos) { - struct spu_context *ctx = file->private_data; int ret = 0; u32 data; if (len < 4) return -EINVAL; - spu_acquire_saved(ctx); if (ctx->csa.spu_chnlcnt_RW[3]) { data = ctx->csa.spu_chnldata_RW[3]; ret = 4; } - spu_release(ctx); if (!ret) goto out; @@ -746,6 +757,19 @@ out: return ret; } +static ssize_t spufs_signal1_read(struct file *file, char __user *buf, + size_t len, loff_t *pos) +{ + int ret; + struct spu_context *ctx = file->private_data; + + spu_acquire_saved(ctx); + ret = __spufs_signal1_read(ctx, buf, len, pos); + spu_release(ctx); + + return ret; +} + static ssize_t spufs_signal1_write(struct file *file, const char __user *buf, size_t len, loff_t *pos) { @@ -816,22 +840,19 @@ static int spufs_signal2_open(struct inode *inode, struct file *file) return nonseekable_open(inode, file); } -static ssize_t spufs_signal2_read(struct file *file, char __user *buf, +static ssize_t __spufs_signal2_read(struct spu_context *ctx, char __user *buf, size_t len, loff_t *pos) { - struct spu_context *ctx = file->private_data; int ret = 0; u32 data; if (len < 4) return -EINVAL; - spu_acquire_saved(ctx); if (ctx->csa.spu_chnlcnt_RW[4]) { data = ctx->csa.spu_chnldata_RW[4]; ret = 4; } - spu_release(ctx); if (!ret) goto out; @@ -840,7 +861,20 @@ static ssize_t spufs_signal2_read(struct file *file, char __user *buf, return -EFAULT; out: - return 4; + return ret; +} + +static ssize_t spufs_signal2_read(struct file *file, char __user *buf, + size_t len, loff_t *pos) +{ + struct spu_context *ctx = file->private_data; + int ret; + + spu_acquire_saved(ctx); + ret = __spufs_signal2_read(ctx, buf, len, pos); + spu_release(ctx); + + return ret; } static ssize_t spufs_signal2_write(struct file *file, const char __user *buf, @@ -916,13 +950,19 @@ static void spufs_signal1_type_set(void *data, u64 val) spu_release(ctx); } +static u64 __spufs_signal1_type_get(void *data) +{ + struct spu_context *ctx = data; + return ctx->ops->signal1_type_get(ctx); +} + static u64 spufs_signal1_type_get(void *data) { struct spu_context *ctx = data; u64 ret; spu_acquire(ctx); - ret = ctx->ops->signal1_type_get(ctx); + ret = __spufs_signal1_type_get(data); spu_release(ctx); return ret; @@ -939,13 +979,19 @@ static void spufs_signal2_type_set(void *data, u64 val) spu_release(ctx); } +static u64 __spufs_signal2_type_get(void *data) +{ + struct spu_context *ctx = data; + return ctx->ops->signal2_type_get(ctx); +} + static u64 spufs_signal2_type_get(void *data) { struct spu_context *ctx = data; u64 ret; spu_acquire(ctx); - ret = ctx->ops->signal2_type_get(ctx); + ret = __spufs_signal2_type_get(data); spu_release(ctx); return ret; @@ -1387,13 +1433,19 @@ static void spufs_decr_set(void *data, u64 val) spu_release(ctx); } -static u64 spufs_decr_get(void *data) +static u64 __spufs_decr_get(void *data) { struct spu_context *ctx = data; struct spu_lscsa *lscsa = ctx->csa.lscsa; + return lscsa->decr.slot[0]; +} + +static u64 spufs_decr_get(void *data) +{ + struct spu_context *ctx = data; u64 ret; spu_acquire_saved(ctx); - ret = lscsa->decr.slot[0]; + ret = __spufs_decr_get(data); spu_release(ctx); return ret; } @@ -1409,13 +1461,19 @@ static void spufs_decr_status_set(void *data, u64 val) spu_release(ctx); } -static u64 spufs_decr_status_get(void *data) +static u64 __spufs_decr_status_get(void *data) { struct spu_context *ctx = data; struct spu_lscsa *lscsa = ctx->csa.lscsa; + return lscsa->decr_status.slot[0]; +} + +static u64 spufs_decr_status_get(void *data) +{ + struct spu_context *ctx = data; u64 ret; spu_acquire_saved(ctx); - ret = lscsa->decr_status.slot[0]; + ret = __spufs_decr_status_get(data); spu_release(ctx); return ret; } @@ -1431,30 +1489,43 @@ static void spufs_event_mask_set(void *data, u64 val) spu_release(ctx); } -static u64 spufs_event_mask_get(void *data) +static u64 __spufs_event_mask_get(void *data) { struct spu_context *ctx = data; struct spu_lscsa *lscsa = ctx->csa.lscsa; + return lscsa->event_mask.slot[0]; +} + +static u64 spufs_event_mask_get(void *data) +{ + struct spu_context *ctx = data; u64 ret; spu_acquire_saved(ctx); - ret = lscsa->event_mask.slot[0]; + ret = __spufs_event_mask_get(data); spu_release(ctx); return ret; } DEFINE_SIMPLE_ATTRIBUTE(spufs_event_mask_ops, spufs_event_mask_get, spufs_event_mask_set, "0x%llx\n") -static u64 spufs_event_status_get(void *data) +static u64 __spufs_event_status_get(void *data) { struct spu_context *ctx = data; struct spu_state *state = &ctx->csa; - u64 ret = 0; u64 stat; - - spu_acquire_saved(ctx); stat = state->spu_chnlcnt_RW[0]; if (stat) - ret = state->spu_chnldata_RW[0]; + return state->spu_chnldata_RW[0]; + return 0; +} + +static u64 spufs_event_status_get(void *data) +{ + struct spu_context *ctx = data; + u64 ret = 0; + + spu_acquire_saved(ctx); + ret = __spufs_event_status_get(data); spu_release(ctx); return ret; } @@ -1499,12 +1570,18 @@ static u64 spufs_id_get(void *data) } DEFINE_SIMPLE_ATTRIBUTE(spufs_id_ops, spufs_id_get, NULL, "0x%llx\n") -static u64 spufs_object_id_get(void *data) +static u64 __spufs_object_id_get(void *data) { struct spu_context *ctx = data; return ctx->object_id; } +static u64 spufs_object_id_get(void *data) +{ + /* FIXME: Should there really be no locking here? */ + return __spufs_object_id_get(data); +} + static void spufs_object_id_set(void *data, u64 id) { struct spu_context *ctx = data; @@ -1514,13 +1591,19 @@ static void spufs_object_id_set(void *data, u64 id) DEFINE_SIMPLE_ATTRIBUTE(spufs_object_id_ops, spufs_object_id_get, spufs_object_id_set, "0x%llx\n"); +static u64 __spufs_lslr_get(void *data) +{ + struct spu_context *ctx = data; + return ctx->csa.priv2.spu_lslr_RW; +} + static u64 spufs_lslr_get(void *data) { struct spu_context *ctx = data; u64 ret; spu_acquire_saved(ctx); - ret = ctx->csa.priv2.spu_lslr_RW; + ret = __spufs_lslr_get(data); spu_release(ctx); return ret; @@ -1535,26 +1618,36 @@ static int spufs_info_open(struct inode *inode, struct file *file) return 0; } +static ssize_t __spufs_mbox_info_read(struct spu_context *ctx, + char __user *buf, size_t len, loff_t *pos) +{ + u32 mbox_stat; + u32 data; + + mbox_stat = ctx->csa.prob.mb_stat_R; + if (mbox_stat & 0x0000ff) { + data = ctx->csa.prob.pu_mb_R; + } + + return simple_read_from_buffer(buf, len, pos, &data, sizeof data); +} + static ssize_t spufs_mbox_info_read(struct file *file, char __user *buf, size_t len, loff_t *pos) { + int ret; struct spu_context *ctx = file->private_data; - u32 mbox_stat; - u32 data; if (!access_ok(VERIFY_WRITE, buf, len)) return -EFAULT; spu_acquire_saved(ctx); spin_lock(&ctx->csa.register_lock); - mbox_stat = ctx->csa.prob.mb_stat_R; - if (mbox_stat & 0x0000ff) { - data = ctx->csa.prob.pu_mb_R; - } + ret = __spufs_mbox_info_read(ctx, buf, len, pos); spin_unlock(&ctx->csa.register_lock); spu_release(ctx); - return simple_read_from_buffer(buf, len, pos, &data, sizeof data); + return ret; } static struct file_operations spufs_mbox_info_fops = { @@ -1563,26 +1656,36 @@ static struct file_operations spufs_mbox_info_fops = { .llseek = generic_file_llseek, }; +static ssize_t __spufs_ibox_info_read(struct spu_context *ctx, + char __user *buf, size_t len, loff_t *pos) +{ + u32 ibox_stat; + u32 data; + + ibox_stat = ctx->csa.prob.mb_stat_R; + if (ibox_stat & 0xff0000) { + data = ctx->csa.priv2.puint_mb_R; + } + + return simple_read_from_buffer(buf, len, pos, &data, sizeof data); +} + static ssize_t spufs_ibox_info_read(struct file *file, char __user *buf, size_t len, loff_t *pos) { struct spu_context *ctx = file->private_data; - u32 ibox_stat; - u32 data; + int ret; if (!access_ok(VERIFY_WRITE, buf, len)) return -EFAULT; spu_acquire_saved(ctx); spin_lock(&ctx->csa.register_lock); - ibox_stat = ctx->csa.prob.mb_stat_R; - if (ibox_stat & 0xff0000) { - data = ctx->csa.priv2.puint_mb_R; - } + ret = __spufs_ibox_info_read(ctx, buf, len, pos); spin_unlock(&ctx->csa.register_lock); spu_release(ctx); - return simple_read_from_buffer(buf, len, pos, &data, sizeof data); + return ret; } static struct file_operations spufs_ibox_info_fops = { @@ -1591,29 +1694,39 @@ static struct file_operations spufs_ibox_info_fops = { .llseek = generic_file_llseek, }; -static ssize_t spufs_wbox_info_read(struct file *file, char __user *buf, - size_t len, loff_t *pos) +static ssize_t __spufs_wbox_info_read(struct spu_context *ctx, + char __user *buf, size_t len, loff_t *pos) { - struct spu_context *ctx = file->private_data; int i, cnt; u32 data[4]; u32 wbox_stat; + wbox_stat = ctx->csa.prob.mb_stat_R; + cnt = 4 - ((wbox_stat & 0x00ff00) >> 8); + for (i = 0; i < cnt; i++) { + data[i] = ctx->csa.spu_mailbox_data[i]; + } + + return simple_read_from_buffer(buf, len, pos, &data, + cnt * sizeof(u32)); +} + +static ssize_t spufs_wbox_info_read(struct file *file, char __user *buf, + size_t len, loff_t *pos) +{ + struct spu_context *ctx = file->private_data; + int ret; + if (!access_ok(VERIFY_WRITE, buf, len)) return -EFAULT; spu_acquire_saved(ctx); spin_lock(&ctx->csa.register_lock); - wbox_stat = ctx->csa.prob.mb_stat_R; - cnt = (wbox_stat & 0x00ff00) >> 8; - for (i = 0; i < cnt; i++) { - data[i] = ctx->csa.spu_mailbox_data[i]; - } + ret = __spufs_wbox_info_read(ctx, buf, len, pos); spin_unlock(&ctx->csa.register_lock); spu_release(ctx); - return simple_read_from_buffer(buf, len, pos, &data, - cnt * sizeof(u32)); + return ret; } static struct file_operations spufs_wbox_info_fops = { @@ -1622,19 +1735,13 @@ static struct file_operations spufs_wbox_info_fops = { .llseek = generic_file_llseek, }; -static ssize_t spufs_dma_info_read(struct file *file, char __user *buf, - size_t len, loff_t *pos) +static ssize_t __spufs_dma_info_read(struct spu_context *ctx, + char __user *buf, size_t len, loff_t *pos) { - struct spu_context *ctx = file->private_data; struct spu_dma_info info; struct mfc_cq_sr *qp, *spuqp; int i; - if (!access_ok(VERIFY_WRITE, buf, len)) - return -EFAULT; - - spu_acquire_saved(ctx); - spin_lock(&ctx->csa.register_lock); info.dma_info_type = ctx->csa.priv2.spu_tag_status_query_RW; info.dma_info_mask = ctx->csa.lscsa->tag_mask.slot[0]; info.dma_info_status = ctx->csa.spu_chnldata_RW[24]; @@ -1649,25 +1756,40 @@ static ssize_t spufs_dma_info_read(struct file *file, char __user *buf, qp->mfc_cq_data2_RW = spuqp->mfc_cq_data2_RW; qp->mfc_cq_data3_RW = spuqp->mfc_cq_data3_RW; } - spin_unlock(&ctx->csa.register_lock); - spu_release(ctx); return simple_read_from_buffer(buf, len, pos, &info, sizeof info); } +static ssize_t spufs_dma_info_read(struct file *file, char __user *buf, + size_t len, loff_t *pos) +{ + struct spu_context *ctx = file->private_data; + int ret; + + if (!access_ok(VERIFY_WRITE, buf, len)) + return -EFAULT; + + spu_acquire_saved(ctx); + spin_lock(&ctx->csa.register_lock); + ret = __spufs_dma_info_read(ctx, buf, len, pos); + spin_unlock(&ctx->csa.register_lock); + spu_release(ctx); + + return ret; +} + static struct file_operations spufs_dma_info_fops = { .open = spufs_info_open, .read = spufs_dma_info_read, }; -static ssize_t spufs_proxydma_info_read(struct file *file, char __user *buf, - size_t len, loff_t *pos) +static ssize_t __spufs_proxydma_info_read(struct spu_context *ctx, + char __user *buf, size_t len, loff_t *pos) { - struct spu_context *ctx = file->private_data; struct spu_proxydma_info info; - int ret = sizeof info; struct mfc_cq_sr *qp, *puqp; + int ret = sizeof info; int i; if (len < ret) @@ -1676,8 +1798,6 @@ static ssize_t spufs_proxydma_info_read(struct file *file, char __user *buf, if (!access_ok(VERIFY_WRITE, buf, len)) return -EFAULT; - spu_acquire_saved(ctx); - spin_lock(&ctx->csa.register_lock); info.proxydma_info_type = ctx->csa.prob.dma_querytype_RW; info.proxydma_info_mask = ctx->csa.prob.dma_querymask_RW; info.proxydma_info_status = ctx->csa.prob.dma_tagstatus_R; @@ -1690,12 +1810,23 @@ static ssize_t spufs_proxydma_info_read(struct file *file, char __user *buf, qp->mfc_cq_data2_RW = puqp->mfc_cq_data2_RW; qp->mfc_cq_data3_RW = puqp->mfc_cq_data3_RW; } + + return simple_read_from_buffer(buf, len, pos, &info, + sizeof info); +} + +static ssize_t spufs_proxydma_info_read(struct file *file, char __user *buf, + size_t len, loff_t *pos) +{ + struct spu_context *ctx = file->private_data; + int ret; + + spu_acquire_saved(ctx); + spin_lock(&ctx->csa.register_lock); + ret = __spufs_proxydma_info_read(ctx, buf, len, pos); spin_unlock(&ctx->csa.register_lock); spu_release(ctx); - if (copy_to_user(buf, &info, sizeof info)) - ret = -EFAULT; - return ret; } @@ -1760,3 +1891,27 @@ struct tree_descr spufs_dir_nosched_contents[] = { { "object-id", &spufs_object_id_ops, 0666, }, {}, }; + +struct spufs_coredump_reader spufs_coredump_read[] = { + { "regs", __spufs_regs_read, NULL, 128 * 16 }, + { "fpcr", __spufs_fpcr_read, NULL, 16 }, + { "lslr", NULL, __spufs_lslr_get, 11 }, + { "decr", NULL, __spufs_decr_get, 11 }, + { "decr_status", NULL, __spufs_decr_status_get, 11 }, + { "mem", __spufs_mem_read, NULL, 256 * 1024, }, + { "signal1", __spufs_signal1_read, NULL, 4 }, + { "signal1_type", NULL, __spufs_signal1_type_get, 2 }, + { "signal2", __spufs_signal2_read, NULL, 4 }, + { "signal2_type", NULL, __spufs_signal2_type_get, 2 }, + { "event_mask", NULL, __spufs_event_mask_get, 8 }, + { "event_status", NULL, __spufs_event_status_get, 8 }, + { "mbox_info", __spufs_mbox_info_read, NULL, 4 }, + { "ibox_info", __spufs_ibox_info_read, NULL, 4 }, + { "wbox_info", __spufs_wbox_info_read, NULL, 16 }, + { "dma_info", __spufs_dma_info_read, NULL, 69 * 8 }, + { "proxydma_info", __spufs_proxydma_info_read, NULL, 35 * 8 }, + { "object-id", NULL, __spufs_object_id_get, 19 }, + { }, +}; +int spufs_coredump_num_notes = ARRAY_SIZE(spufs_coredump_read) - 1; + diff --git a/arch/powerpc/platforms/cell/spufs/inode.c b/arch/powerpc/platforms/cell/spufs/inode.c index d5f0a21a19d..a3ca06bd0ca 100644 --- a/arch/powerpc/platforms/cell/spufs/inode.c +++ b/arch/powerpc/platforms/cell/spufs/inode.c @@ -232,6 +232,7 @@ struct file_operations spufs_context_fops = { .readdir = dcache_readdir, .fsync = simple_sync_file, }; +EXPORT_SYMBOL_GPL(spufs_context_fops); static int spufs_mkdir(struct inode *dir, struct dentry *dentry, unsigned int flags, @@ -647,6 +648,7 @@ static struct file_system_type spufs_type = { static int __init spufs_init(void) { int ret; + ret = -ENOMEM; spufs_inode_cache = kmem_cache_create("spufs_inode_cache", sizeof(struct spufs_inode_info), 0, @@ -662,10 +664,14 @@ static int __init spufs_init(void) if (ret) goto out_cache; ret = register_spu_syscalls(&spufs_calls); + if (ret) + goto out_fs; + ret = register_arch_coredump_calls(&spufs_coredump_calls); if (ret) goto out_fs; spufs_init_isolated_loader(); + return 0; out_fs: unregister_filesystem(&spufs_type); @@ -679,6 +685,7 @@ module_init(spufs_init); static void __exit spufs_exit(void) { spu_sched_exit(); + unregister_arch_coredump_calls(&spufs_coredump_calls); unregister_spu_syscalls(&spufs_calls); unregister_filesystem(&spufs_type); kmem_cache_destroy(spufs_inode_cache); diff --git a/arch/powerpc/platforms/cell/spufs/spufs.h b/arch/powerpc/platforms/cell/spufs/spufs.h index 23d20f38056..70fb13395c0 100644 --- a/arch/powerpc/platforms/cell/spufs/spufs.h +++ b/arch/powerpc/platforms/cell/spufs/spufs.h @@ -223,4 +223,15 @@ void spufs_stop_callback(struct spu *spu); void spufs_mfc_callback(struct spu *spu); void spufs_dma_callback(struct spu *spu, int type); +extern struct spu_coredump_calls spufs_coredump_calls; +struct spufs_coredump_reader { + char *name; + ssize_t (*read)(struct spu_context *ctx, + char __user *buffer, size_t size, loff_t *pos); + u64 (*get)(void *data); + size_t size; +}; +extern struct spufs_coredump_reader spufs_coredump_read[]; +extern int spufs_coredump_num_notes; + #endif diff --git a/fs/binfmt_elf.c b/fs/binfmt_elf.c index 79b05a1a436..cc72bb43061 100644 --- a/fs/binfmt_elf.c +++ b/fs/binfmt_elf.c @@ -1582,6 +1582,10 @@ static int elf_core_dump(long signr, struct pt_regs *regs, struct file *file) sz += thread_status_size; +#ifdef ELF_CORE_WRITE_EXTRA_NOTES + sz += ELF_CORE_EXTRA_NOTES_SIZE; +#endif + fill_elf_note_phdr(&phdr, sz, offset); offset += sz; DUMP_WRITE(&phdr, sizeof(phdr)); @@ -1622,6 +1626,10 @@ static int elf_core_dump(long signr, struct pt_regs *regs, struct file *file) if (!writenote(notes + i, file, &foffset)) goto end_coredump; +#ifdef ELF_CORE_WRITE_EXTRA_NOTES + ELF_CORE_WRITE_EXTRA_NOTES; +#endif + /* write out the thread status notes section */ list_for_each(t, &thread_list) { struct elf_thread_status *tmp = diff --git a/include/asm-powerpc/elf.h b/include/asm-powerpc/elf.h index 9a83a987d39..4545aa68250 100644 --- a/include/asm-powerpc/elf.h +++ b/include/asm-powerpc/elf.h @@ -411,4 +411,17 @@ do { \ /* Keep this the last entry. */ #define R_PPC64_NUM 107 +#ifdef CONFIG_PPC_CELL +/* Notes used in ET_CORE. Note name is "SPU//". */ +#define NT_SPU 1 + +extern int arch_notes_size(void); +extern void arch_write_notes(struct file *file); + +#define ELF_CORE_EXTRA_NOTES_SIZE arch_notes_size() +#define ELF_CORE_WRITE_EXTRA_NOTES arch_write_notes(file) + +#define ARCH_HAVE_EXTRA_ELF_NOTES +#endif /* CONFIG_PPC_CELL */ + #endif /* _ASM_POWERPC_ELF_H */ diff --git a/include/asm-powerpc/spu.h b/include/asm-powerpc/spu.h index ffa4df08360..f968f869753 100644 --- a/include/asm-powerpc/spu.h +++ b/include/asm-powerpc/spu.h @@ -172,6 +172,13 @@ extern struct spufs_calls { struct module *owner; } spufs_calls; +/* coredump calls implemented in spufs */ +struct spu_coredump_calls { + asmlinkage int (*arch_notes_size)(void); + asmlinkage void (*arch_write_notes)(struct file *file); + struct module *owner; +}; + /* return status from spu_run, same as in libspe */ #define SPE_EVENT_DMA_ALIGNMENT 0x0008 /*A DMA alignment error */ #define SPE_EVENT_SPE_ERROR 0x0010 /*An illegal instruction error*/ @@ -203,6 +210,9 @@ static inline void unregister_spu_syscalls(struct spufs_calls *calls) } #endif /* MODULE */ +int register_arch_coredump_calls(struct spu_coredump_calls *calls); +void unregister_arch_coredump_calls(struct spu_coredump_calls *calls); + int spu_add_sysdev_attr(struct sysdev_attribute *attr); void spu_remove_sysdev_attr(struct sysdev_attribute *attr); diff --git a/include/linux/elf.h b/include/linux/elf.h index b70d1d2c8d2..743d5c8e6d3 100644 --- a/include/linux/elf.h +++ b/include/linux/elf.h @@ -368,5 +368,12 @@ extern Elf64_Dyn _DYNAMIC []; #endif +#ifndef ARCH_HAVE_EXTRA_ELF_NOTES +static inline int arch_notes_size(void) { return 0; } +static inline void arch_write_notes(struct file *file) { } + +#define ELF_CORE_EXTRA_NOTES_SIZE arch_notes_size() +#define ELF_CORE_WRITE_EXTRA_NOTES arch_write_notes(file) +#endif /* ARCH_HAVE_EXTRA_ELF_NOTES */ #endif /* _LINUX_ELF_H */ -- cgit v1.2.3-70-g09d2 From 5850dd8f6d4e79484d498c0d77b223d1041f9954 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Thu, 23 Nov 2006 00:46:38 +0100 Subject: [POWERPC] cell: hard disable interrupts in power_save() With soft-disabled interrupts in power_save, we can still get external exceptions on Cell, even if we are in pause(0) a.k.a. sleep state. When the CPU really wakes up through the 0x100 (system reset) vector, while we have already started processing the 0x500 (external) exception, we get a panic in unrecoverable_exception() because of the lost state. This occurred in Systemsim for Cell, but as far as I can see, it can theoretically occur on any machine that uses the system reset exception to get out of sleep state. Signed-off-by: Benjamin Herrenschmidt Signed-off-by: Arnd Bergmann --- arch/powerpc/platforms/cell/pervasive.c | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'arch/powerpc') diff --git a/arch/powerpc/platforms/cell/pervasive.c b/arch/powerpc/platforms/cell/pervasive.c index c68fabdc787..8c20f0fb865 100644 --- a/arch/powerpc/platforms/cell/pervasive.c +++ b/arch/powerpc/platforms/cell/pervasive.c @@ -41,6 +41,15 @@ static void cbe_power_save(void) { unsigned long ctrl, thread_switch_control; + + /* + * We need to hard disable interrupts, but we also need to mark them + * hard disabled in the PACA so that the local_irq_enable() done by + * our caller upon return propertly hard enables. + */ + hard_irq_disable(); + get_paca()->hard_enabled = 0; + ctrl = mfspr(SPRN_CTRLF); /* Enable DEC and EE interrupt request */ -- cgit v1.2.3-70-g09d2 From 437a0706837d09d8ab071c6790da07d9d6bb3d22 Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Thu, 23 Nov 2006 00:46:39 +0100 Subject: [POWERPC] Fix sparse warning in xmon Cell code My patch to add spu helpers to xmon (a898497088f46252e6750405504064e2dce53117) introduced a few sparse warnings, because I was dereferencing an __iomem pointer. I think the best way to handle it is to actually use the appropriate in_beXX functions. Need to rejigger the DUMP macro a little to accomodate that. Signed-off-by: Michael Ellerman Signed-off-by: Arnd Bergmann --- arch/powerpc/xmon/xmon.c | 22 +++++++++++++++------- 1 file changed, 15 insertions(+), 7 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/xmon/xmon.c b/arch/powerpc/xmon/xmon.c index d66c3a17032..6b9d720f7ff 100644 --- a/arch/powerpc/xmon/xmon.c +++ b/arch/powerpc/xmon/xmon.c @@ -2748,13 +2748,13 @@ static void restart_spus(void) } #define DUMP_WIDTH 23 -#define DUMP_FIELD(obj, format, field) \ +#define DUMP_VALUE(format, field, value) \ do { \ if (setjmp(bus_error_jmp) == 0) { \ catch_memory_errors = 1; \ sync(); \ printf(" %-*s = "format"\n", DUMP_WIDTH, \ - #field, obj->field); \ + #field, value); \ sync(); \ __delay(200); \ } else { \ @@ -2765,6 +2765,9 @@ do { \ catch_memory_errors = 0; \ } while (0) +#define DUMP_FIELD(obj, format, field) \ + DUMP_VALUE(format, field, obj->field) + static void dump_spu_fields(struct spu *spu) { printf("Dumping spu fields at address %p:\n", spu); @@ -2793,13 +2796,18 @@ static void dump_spu_fields(struct spu *spu) DUMP_FIELD(spu, "0x%p", timestamp); DUMP_FIELD(spu, "0x%lx", problem_phys); DUMP_FIELD(spu, "0x%p", problem); - DUMP_FIELD(spu, "0x%x", problem->spu_runcntl_RW); - DUMP_FIELD(spu, "0x%x", problem->spu_status_R); - DUMP_FIELD(spu, "0x%x", problem->spu_npc_RW); + DUMP_VALUE("0x%x", problem->spu_runcntl_RW, + in_be32(&spu->problem->spu_runcntl_RW)); + DUMP_VALUE("0x%x", problem->spu_status_R, + in_be32(&spu->problem->spu_status_R)); + DUMP_VALUE("0x%x", problem->spu_npc_RW, + in_be32(&spu->problem->spu_npc_RW)); DUMP_FIELD(spu, "0x%p", priv1); - if (spu->priv1) - DUMP_FIELD(spu, "0x%lx", priv1->mfc_sr1_RW); + if (spu->priv1) { + DUMP_VALUE("0x%lx", priv1->mfc_sr1_RW, + in_be64(&spu->priv1->mfc_sr1_RW)); + } DUMP_FIELD(spu, "0x%p", priv2); } -- cgit v1.2.3-70-g09d2 From 2a14442bfebfea23d004fa4dfd067a94f5720ed7 Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Thu, 23 Nov 2006 00:46:40 +0100 Subject: [POWERPC] Show state of spus as theyre stopped in Cell xmon helper After stopping spus in xmon I often find myself trawling through the field dumps to find out which spus were running. The spu stopping code actually knows what's running, so let's print it out to save the user some futzing. Signed-off-by: Michael Ellerman Signed-off-by: Arnd Bergmann --- arch/powerpc/xmon/xmon.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/xmon/xmon.c b/arch/powerpc/xmon/xmon.c index 6b9d720f7ff..ac17abbe3ef 100644 --- a/arch/powerpc/xmon/xmon.c +++ b/arch/powerpc/xmon/xmon.c @@ -2702,7 +2702,10 @@ static void stop_spus(void) __delay(200); spu_info[i].stopped_ok = 1; - printf("Stopped spu %.2d\n", i); + + printf("Stopped spu %.2d (was %s)\n", i, + spu_info[i].saved_spu_runcntl_RW ? + "running" : "stopped"); } else { catch_memory_errors = 0; printf("*** Error stopping spu %.2d\n", i); -- cgit v1.2.3-70-g09d2 From 24a24c85d3c35790a355138d7cd34c074cb1b3ac Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Thu, 23 Nov 2006 00:46:41 +0100 Subject: [POWERPC] Add a sd command (spu dump) to xmon to dump spu local store Add a command to xmon to dump the memory of a spu's local store. This mimics the 'd' command which dumps regular memory, but does a little hand holding by taking the user supplied address and finding that offset in the local store for the specified spu. This makes it easy for example to look at what was executing on a spu: 1:mon> ss ... Stopped spu 04 (was running) ... 1:mon> sf 4 Dumping spu fields at address c0000000019e0a00: ... problem->spu_npc_RW = 0x228 ... 1:mon> sd 4 0x228 d000080080318228 01a00c021cffc408 4020007f217ff488 |........@ ..!...| Aha, 01a00c02, which is of course rdch $2,$ch24 ! -- Updated to only do the setjmp goo around the spu access, and not around prdump because it does its own (via mread). Also the num variable is now common between sf and sd, so you don't have to keep typing the spu number in if you're repeating commands on the same spu. Signed-off-by: Michael Ellerman Signed-off-by: Arnd Bergmann --- arch/powerpc/xmon/xmon.c | 60 ++++++++++++++++++++++++++++++++++++++++++++---- 1 file changed, 55 insertions(+), 5 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/xmon/xmon.c b/arch/powerpc/xmon/xmon.c index ac17abbe3ef..be2c12d6878 100644 --- a/arch/powerpc/xmon/xmon.c +++ b/arch/powerpc/xmon/xmon.c @@ -218,7 +218,8 @@ Commands:\n\ #ifdef CONFIG_PPC_CELL " ss stop execution on all spus\n\ sr restore execution on stopped spus\n\ - sf # dump spu fields for spu # (in hex)\n" + sf # dump spu fields for spu # (in hex)\n\ + sd # dump spu local store for spu # (in hex)\n" #endif " S print special registers\n\ t print backtrace\n\ @@ -2651,6 +2652,7 @@ struct spu_info { struct spu *spu; u64 saved_mfc_sr1_RW; u32 saved_spu_runcntl_RW; + unsigned long dump_addr; u8 stopped_ok; }; @@ -2670,6 +2672,8 @@ void xmon_register_spus(struct list_head *list) spu_info[spu->number].spu = spu; spu_info[spu->number].stopped_ok = 0; + spu_info[spu->number].dump_addr = (unsigned long) + spu_info[spu->number].spu->local_store; } } @@ -2815,9 +2819,43 @@ static void dump_spu_fields(struct spu *spu) DUMP_FIELD(spu, "0x%p", priv2); } +static void dump_spu_ls(unsigned long num) +{ + unsigned long offset, addr, ls_addr; + + if (setjmp(bus_error_jmp) == 0) { + catch_memory_errors = 1; + sync(); + ls_addr = (unsigned long)spu_info[num].spu->local_store; + sync(); + __delay(200); + } else { + catch_memory_errors = 0; + printf("*** Error: accessing spu info for spu %d\n", num); + return; + } + catch_memory_errors = 0; + + if (scanhex(&offset)) + addr = ls_addr + offset; + else + addr = spu_info[num].dump_addr; + + if (addr >= ls_addr + LS_SIZE) { + printf("*** Error: address outside of local store\n"); + return; + } + + prdump(addr, 64); + addr += 64; + last_cmd = "sd\n"; + + spu_info[num].dump_addr = addr; +} + static int do_spu_cmd(void) { - unsigned long num = 0; + static unsigned long num = 0; int cmd; cmd = inchar(); @@ -2829,10 +2867,22 @@ static int do_spu_cmd(void) restart_spus(); break; case 'f': - if (scanhex(&num) && num < XMON_NUM_SPUS && spu_info[num].spu) - dump_spu_fields(spu_info[num].spu); - else + case 'd': + scanhex(&num); + if (num >= XMON_NUM_SPUS || !spu_info[num].spu) { printf("*** Error: invalid spu number\n"); + return 0; + } + + switch (cmd) { + case 'f': + dump_spu_fields(spu_info[num].spu); + break; + default: + dump_spu_ls(num); + break; + } + break; default: return -1; -- cgit v1.2.3-70-g09d2 From 4c4c8723684b1b2cd0dfdf5e0685f35642bde253 Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Thu, 23 Nov 2006 00:46:42 +0100 Subject: [POWERPC] Prepare for spu disassembly in xmon In order to do disassembly of spu binaries in xmon, we need to abstract the disassembly function from ppc_inst_dump. We do this by making the actual disassembly function a function pointer that we pass to ppc_inst_dump(). To save updating all the callers, we turn ppc_inst_dump() into generic_inst_dump() and make ppc_inst_dump() a wrapper which always uses print_insn_powerpc(). Currently we pass the dialect into print_insn_powerpc(), but we always pass 0 - so just make it a local. Signed-off-by: Michael Ellerman Signed-off-by: Arnd Bergmann --- arch/powerpc/xmon/ppc-dis.c | 6 +++--- arch/powerpc/xmon/xmon.c | 15 ++++++++++++--- 2 files changed, 15 insertions(+), 6 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/xmon/ppc-dis.c b/arch/powerpc/xmon/ppc-dis.c index ac0a9d2427e..3b67bee4830 100644 --- a/arch/powerpc/xmon/ppc-dis.c +++ b/arch/powerpc/xmon/ppc-dis.c @@ -27,14 +27,14 @@ extern void print_address (unsigned long memaddr); /* Print a PowerPC or POWER instruction. */ int -print_insn_powerpc (unsigned long insn, unsigned long memaddr, int dialect) +print_insn_powerpc (unsigned long insn, unsigned long memaddr) { const struct powerpc_opcode *opcode; const struct powerpc_opcode *opcode_end; unsigned long op; + int dialect; - if (dialect == 0) - dialect = PPC_OPCODE_PPC | PPC_OPCODE_CLASSIC | PPC_OPCODE_COMMON + dialect = PPC_OPCODE_PPC | PPC_OPCODE_CLASSIC | PPC_OPCODE_COMMON | PPC_OPCODE_64 | PPC_OPCODE_POWER4 | PPC_OPCODE_ALTIVEC; /* Get the major opcode of the instruction. */ diff --git a/arch/powerpc/xmon/xmon.c b/arch/powerpc/xmon/xmon.c index be2c12d6878..a39b17638b7 100644 --- a/arch/powerpc/xmon/xmon.c +++ b/arch/powerpc/xmon/xmon.c @@ -154,7 +154,7 @@ static int do_spu_cmd(void); int xmon_no_auto_backtrace; -extern int print_insn_powerpc(unsigned long, unsigned long, int); +extern int print_insn_powerpc(unsigned long insn, unsigned long memaddr); extern void xmon_enter(void); extern void xmon_leave(void); @@ -2068,8 +2068,11 @@ prdump(unsigned long adrs, long ndump) } } +typedef int (*instruction_dump_func)(unsigned long inst, unsigned long addr); + int -ppc_inst_dump(unsigned long adr, long count, int praddr) +generic_inst_dump(unsigned long adr, long count, int praddr, + instruction_dump_func dump_func) { int nr, dotted; unsigned long first_adr; @@ -2099,12 +2102,18 @@ ppc_inst_dump(unsigned long adr, long count, int praddr) if (praddr) printf(REG" %.8x", adr, inst); printf("\t"); - print_insn_powerpc(inst, adr, 0); /* always returns 4 */ + dump_func(inst, adr); printf("\n"); } return adr - first_adr; } +int +ppc_inst_dump(unsigned long adr, long count, int praddr) +{ + return generic_inst_dump(adr, count, praddr, print_insn_powerpc); +} + void print_address(unsigned long addr) { -- cgit v1.2.3-70-g09d2 From ae06e374c15c5d62e08c19c15f2c247a86e240d4 Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Thu, 23 Nov 2006 00:46:43 +0100 Subject: [POWERPC] Import spu disassembly code into xmon This patch imports and munges the spu disassembly code from binutils. All files originated from version 1.1 in binutils cvs. * spu.h, spu-insns.h and spu-opc.c are unchanged except for pathnames. * spu-dis.c has been edited heavily: * use printf instead of info->fprintf_func and similar. * pass the instruction in rather than reading it. * we have no equivalent to symbol_at_address_func, so we just assume there is never a symbol at the address given. Signed-off-by: Michael Ellerman Signed-off-by: Arnd Bergmann --- arch/powerpc/xmon/spu-dis.c | 249 +++++++++++++++++++++++++ arch/powerpc/xmon/spu-insns.h | 410 ++++++++++++++++++++++++++++++++++++++++++ arch/powerpc/xmon/spu-opc.c | 44 +++++ arch/powerpc/xmon/spu.h | 126 +++++++++++++ 4 files changed, 829 insertions(+) create mode 100644 arch/powerpc/xmon/spu-dis.c create mode 100644 arch/powerpc/xmon/spu-insns.h create mode 100644 arch/powerpc/xmon/spu-opc.c create mode 100644 arch/powerpc/xmon/spu.h (limited to 'arch/powerpc') diff --git a/arch/powerpc/xmon/spu-dis.c b/arch/powerpc/xmon/spu-dis.c new file mode 100644 index 00000000000..75ac0815f1a --- /dev/null +++ b/arch/powerpc/xmon/spu-dis.c @@ -0,0 +1,249 @@ +/* Disassemble SPU instructions + + Copyright 2006 Free Software Foundation, Inc. + + This file is part of GDB, GAS, and the GNU binutils. + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License along + with this program; if not, write to the Free Software Foundation, Inc., + 51 Franklin Street - Fifth Floor, Boston, MA 02110-1301, USA. */ + +#include +#include "nonstdio.h" +#include "ansidecl.h" +#include "spu.h" + +extern void print_address (unsigned long memaddr); + +/* This file provides a disassembler function which uses + the disassembler interface defined in dis-asm.h. */ + +extern const struct spu_opcode spu_opcodes[]; +extern const int spu_num_opcodes; + +#define SPU_DISASM_TBL_SIZE (1 << 11) +static const struct spu_opcode *spu_disassemble_table[SPU_DISASM_TBL_SIZE]; + +static void +init_spu_disassemble (void) +{ + int i; + + /* If two instructions have the same opcode then we prefer the first + * one. In most cases it is just an alternate mnemonic. */ + for (i = 0; i < spu_num_opcodes; i++) + { + int o = spu_opcodes[i].opcode; + if (o >= SPU_DISASM_TBL_SIZE) + continue; /* abort (); */ + if (spu_disassemble_table[o] == 0) + spu_disassemble_table[o] = &spu_opcodes[i]; + } +} + +/* Determine the instruction from the 10 least significant bits. */ +static const struct spu_opcode * +get_index_for_opcode (unsigned int insn) +{ + const struct spu_opcode *index; + unsigned int opcode = insn >> (32-11); + + /* Init the table. This assumes that element 0/opcode 0 (currently + * NOP) is always used */ + if (spu_disassemble_table[0] == 0) + init_spu_disassemble (); + + if ((index = spu_disassemble_table[opcode & 0x780]) != 0 + && index->insn_type == RRR) + return index; + + if ((index = spu_disassemble_table[opcode & 0x7f0]) != 0 + && (index->insn_type == RI18 || index->insn_type == LBT)) + return index; + + if ((index = spu_disassemble_table[opcode & 0x7f8]) != 0 + && index->insn_type == RI10) + return index; + + if ((index = spu_disassemble_table[opcode & 0x7fc]) != 0 + && (index->insn_type == RI16)) + return index; + + if ((index = spu_disassemble_table[opcode & 0x7fe]) != 0 + && (index->insn_type == RI8)) + return index; + + if ((index = spu_disassemble_table[opcode & 0x7ff]) != 0) + return index; + + return 0; +} + +/* Print a Spu instruction. */ + +int +print_insn_spu (unsigned long insn, unsigned long memaddr) +{ + int value; + int hex_value; + const struct spu_opcode *index; + enum spu_insns tag; + + index = get_index_for_opcode (insn); + + if (index == 0) + { + printf(".long 0x%x", insn); + } + else + { + int i; + int paren = 0; + tag = (enum spu_insns)(index - spu_opcodes); + printf("%s", index->mnemonic); + if (tag == M_BI || tag == M_BISL || tag == M_IRET || tag == M_BISLED + || tag == M_BIHNZ || tag == M_BIHZ || tag == M_BINZ || tag == M_BIZ + || tag == M_SYNC || tag == M_HBR) + { + int fb = (insn >> (32-18)) & 0x7f; + if (fb & 0x40) + printf(tag == M_SYNC ? "c" : "p"); + if (fb & 0x20) + printf("d"); + if (fb & 0x10) + printf("e"); + } + if (index->arg[0] != 0) + printf("\t"); + hex_value = 0; + for (i = 1; i <= index->arg[0]; i++) + { + int arg = index->arg[i]; + if (arg != A_P && !paren && i > 1) + printf(","); + + switch (arg) + { + case A_T: + printf("$%d", + DECODE_INSN_RT (insn)); + break; + case A_A: + printf("$%d", + DECODE_INSN_RA (insn)); + break; + case A_B: + printf("$%d", + DECODE_INSN_RB (insn)); + break; + case A_C: + printf("$%d", + DECODE_INSN_RC (insn)); + break; + case A_S: + printf("$sp%d", + DECODE_INSN_RA (insn)); + break; + case A_H: + printf("$ch%d", + DECODE_INSN_RA (insn)); + break; + case A_P: + paren++; + printf("("); + break; + case A_U7A: + printf("%d", + 173 - DECODE_INSN_U8 (insn)); + break; + case A_U7B: + printf("%d", + 155 - DECODE_INSN_U8 (insn)); + break; + case A_S3: + case A_S6: + case A_S7: + case A_S7N: + case A_U3: + case A_U5: + case A_U6: + case A_U7: + hex_value = DECODE_INSN_I7 (insn); + printf("%d", hex_value); + break; + case A_S11: + print_address(memaddr + DECODE_INSN_I9a (insn) * 4); + break; + case A_S11I: + print_address(memaddr + DECODE_INSN_I9b (insn) * 4); + break; + case A_S10: + case A_S10B: + hex_value = DECODE_INSN_I10 (insn); + printf("%d", hex_value); + break; + case A_S14: + hex_value = DECODE_INSN_I10 (insn) * 16; + printf("%d", hex_value); + break; + case A_S16: + hex_value = DECODE_INSN_I16 (insn); + printf("%d", hex_value); + break; + case A_X16: + hex_value = DECODE_INSN_U16 (insn); + printf("%u", hex_value); + break; + case A_R18: + value = DECODE_INSN_I16 (insn) * 4; + if (value == 0) + printf("%d", value); + else + { + hex_value = memaddr + value; + print_address(hex_value & 0x3ffff); + } + break; + case A_S18: + value = DECODE_INSN_U16 (insn) * 4; + if (value == 0) + printf("%d", value); + else + print_address(value); + break; + case A_U18: + value = DECODE_INSN_U18 (insn); + if (value == 0 || 1) + { + hex_value = value; + printf("%u", value); + } + else + print_address(value); + break; + case A_U14: + hex_value = DECODE_INSN_U14 (insn); + printf("%u", hex_value); + break; + } + if (arg != A_P && paren) + { + printf(")"); + paren--; + } + } + if (hex_value > 16) + printf("\t# %x", hex_value); + } + return 4; +} diff --git a/arch/powerpc/xmon/spu-insns.h b/arch/powerpc/xmon/spu-insns.h new file mode 100644 index 00000000000..99dc452821a --- /dev/null +++ b/arch/powerpc/xmon/spu-insns.h @@ -0,0 +1,410 @@ +/* SPU ELF support for BFD. + + Copyright 2006 Free Software Foundation, Inc. + + This file is part of BFD, the Binary File Descriptor library. + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software Foundation, + Inc., 51 Franklin Street - Fifth Floor, Boston, MA 02110-1301, USA. */ + +/* SPU Opcode Table + +-=-=-= FORMAT =-=-=- + + +----+-------+-------+-------+-------+ +------------+-------+-------+-------+ +RRR | op | RC | RB | RA | RT | RI7 | op | I7 | RA | RT | + +----+-------+-------+-------+-------+ +------------+-------+-------+-------+ + 0 3 1 1 2 3 0 1 1 2 3 + 0 7 4 1 0 7 4 1 + + +-----------+--------+-------+-------+ +---------+----------+-------+-------+ +RI8 | op | I8 | RA | RT | RI10 | op | I10 | RA | RT | + +-----------+--------+-------+-------+ +---------+----------+-------+-------+ + 0 9 1 2 3 0 7 1 2 3 + 7 4 1 7 4 1 + + +----------+-----------------+-------+ +--------+-------------------+-------+ +RI16 | op | I16 | RT | RI18 | op | I18 | RT | + +----------+-----------------+-------+ +--------+-------------------+-------+ + 0 8 2 3 0 6 2 3 + 4 1 4 1 + + +------------+-------+-------+-------+ +-------+--+-----------------+-------+ +RR | op | RB | RA | RT | LBT | op |RO| I16 | RO | + +------------+-------+-------+-------+ +-------+--+-----------------+-------+ + 0 1 1 2 3 0 6 8 2 3 + 0 7 4 1 4 1 + + +------------+----+--+-------+-------+ + LBTI | op | // |RO| RA | RO | + +------------+----+--+-------+-------+ + 0 1 1 1 2 3 + 0 5 7 4 1 + +-=-=-= OPCODE =-=-=- + +OPCODE field specifies the most significant 11bit of the instruction. Some formats don't have 11bits for opcode field, and in this +case, bit field other than op are defined as 0s. For example, opcode of fma instruction which is RRR format is defined as 0x700, +since 0x700 -> 11'b11100000000, this means opcode is 4'b1110, and other 7bits are defined as 7'b0000000. + +-=-=-= ASM_FORMAT =-=-=- + +RRR category RI7 category + ASM_RRR mnemonic RC, RA, RB, RT ASM_RI4 mnemonic RT, RA, I4 + ASM_RI7 mnemonic RT, RA, I7 + +RI8 category RI10 category + ASM_RUI8 mnemonic RT, RA, UI8 ASM_AI10 mnemonic RA, I10 + ASM_RI10 mnemonic RT, RA, R10 + ASM_RI10IDX mnemonic RT, I10(RA) + +RI16 category RI18 category + ASM_I16W mnemonic I16W ASM_RI18 mnemonic RT, I18 + ASM_RI16 mnemonic RT, I16 + ASM_RI16W mnemonic RT, I16W + +RR category LBT category + ASM_MFSPR mnemonic RT, SA ASM_LBT mnemonic brinst, brtarg + ASM_MTSPR mnemonic SA, RT + ASM_NOOP mnemonic LBTI category + ASM_RA mnemonic RA ASM_LBTI mnemonic brinst, RA + ASM_RAB mnemonic RA, RB + ASM_RDCH mnemonic RT, CA + ASM_RR mnemonic RT, RA, RB + ASM_RT mnemonic RT + ASM_RTA mnemonic RT, RA + ASM_WRCH mnemonic CA, RT + +Note that RRR instructions have the names for RC and RT reversed from +what's in the ISA, in order to put RT in the same position it appears +for other formats. + +-=-=-= DEPENDENCY =-=-=- + +DEPENDENCY filed consists of 5 digits. This represents which register is used as source and which register is used as target. +The first(most significant) digit is always 0. Then it is followd by RC, RB, RA and RT digits. +If the digit is 0, this means the corresponding register is not used in the instruction. +If the digit is 1, this means the corresponding register is used as a source in the instruction. +If the digit is 2, this means the corresponding register is used as a target in the instruction. +If the digit is 3, this means the corresponding register is used as both source and target in the instruction. +For example, fms instruction has 00113 as the DEPENDENCY field. This means RC is not used in this operation, RB and RA are +used as sources and RT is the target. + +-=-=-= PIPE =-=-=- + +This field shows which execution pipe is used for the instruction + +pipe0 execution pipelines: + FP6 SP floating pipeline + FP7 integer operations executed in SP floating pipeline + FPD DP floating pipeline + FX2 FXU pipeline + FX3 Rotate/Shift pipeline + FXB Byte pipeline + NOP No pipeline + +pipe1 execution pipelines: + BR Branch pipeline + LNOP No pipeline + LS Load/Store pipeline + SHUF Shuffle pipeline + SPR SPR/CH pipeline + +*/ + +#define _A0() {0} +#define _A1(a) {1,a} +#define _A2(a,b) {2,a,b} +#define _A3(a,b,c) {3,a,b,c} +#define _A4(a,b,c,d) {4,a,b,c,d} + +/* TAG FORMAT OPCODE MNEMONIC ASM_FORMAT DEPENDENCY PIPE COMMENT */ +/* 0[RC][RB][RA][RT] */ +/* 1:src, 2:target */ + +APUOP(M_BR, RI16, 0x190, "br", _A1(A_R18), 00000, BR) /* BRel IP<-IP+I16 */ +APUOP(M_BRSL, RI16, 0x198, "brsl", _A2(A_T,A_R18), 00002, BR) /* BRelSetLink RT,IP<-IP,IP+I16 */ +APUOP(M_BRA, RI16, 0x180, "bra", _A1(A_S18), 00000, BR) /* BRAbs IP<-I16 */ +APUOP(M_BRASL, RI16, 0x188, "brasl", _A2(A_T,A_S18), 00002, BR) /* BRAbsSetLink RT,IP<-IP,I16 */ +APUOP(M_FSMBI, RI16, 0x194, "fsmbi", _A2(A_T,A_X16), 00002, SHUF) /* FormSelMask%I RT<-fsm(I16) */ +APUOP(M_LQA, RI16, 0x184, "lqa", _A2(A_T,A_S18), 00002, LS) /* LoadQAbs RT<-M[I16] */ +APUOP(M_LQR, RI16, 0x19C, "lqr", _A2(A_T,A_R18), 00002, LS) /* LoadQRel RT<-M[IP+I16] */ +APUOP(M_STOP, RR, 0x000, "stop", _A0(), 00000, BR) /* STOP stop */ +APUOP(M_STOP2, RR, 0x000, "stop", _A1(A_U14), 00000, BR) /* STOP stop */ +APUOP(M_STOPD, RR, 0x140, "stopd", _A3(A_T,A_A,A_B), 00111, BR) /* STOPD stop (with register dependencies) */ +APUOP(M_LNOP, RR, 0x001, "lnop", _A0(), 00000, LNOP) /* LNOP no_operation */ +APUOP(M_SYNC, RR, 0x002, "sync", _A0(), 00000, BR) /* SYNC flush_pipe */ +APUOP(M_DSYNC, RR, 0x003, "dsync", _A0(), 00000, BR) /* DSYNC flush_store_queue */ +APUOP(M_MFSPR, RR, 0x00c, "mfspr", _A2(A_T,A_S), 00002, SPR) /* MFSPR RT<-SA */ +APUOP(M_RDCH, RR, 0x00d, "rdch", _A2(A_T,A_H), 00002, SPR) /* ReaDCHannel RT<-CA:data */ +APUOP(M_RCHCNT, RR, 0x00f, "rchcnt", _A2(A_T,A_H), 00002, SPR) /* ReaDCHanCouNT RT<-CA:count */ +APUOP(M_HBRA, LBT, 0x080, "hbra", _A2(A_S11,A_S18), 00000, LS) /* HBRA BTB[B9]<-M[I16] */ +APUOP(M_HBRR, LBT, 0x090, "hbrr", _A2(A_S11,A_R18), 00000, LS) /* HBRR BTB[B9]<-M[IP+I16] */ +APUOP(M_BRZ, RI16, 0x100, "brz", _A2(A_T,A_R18), 00001, BR) /* BRZ IP<-IP+I16_if(RT) */ +APUOP(M_BRNZ, RI16, 0x108, "brnz", _A2(A_T,A_R18), 00001, BR) /* BRNZ IP<-IP+I16_if(RT) */ +APUOP(M_BRHZ, RI16, 0x110, "brhz", _A2(A_T,A_R18), 00001, BR) /* BRHZ IP<-IP+I16_if(RT) */ +APUOP(M_BRHNZ, RI16, 0x118, "brhnz", _A2(A_T,A_R18), 00001, BR) /* BRHNZ IP<-IP+I16_if(RT) */ +APUOP(M_STQA, RI16, 0x104, "stqa", _A2(A_T,A_S18), 00001, LS) /* SToreQAbs M[I16]<-RT */ +APUOP(M_STQR, RI16, 0x11C, "stqr", _A2(A_T,A_R18), 00001, LS) /* SToreQRel M[IP+I16]<-RT */ +APUOP(M_MTSPR, RR, 0x10c, "mtspr", _A2(A_S,A_T), 00001, SPR) /* MTSPR SA<-RT */ +APUOP(M_WRCH, RR, 0x10d, "wrch", _A2(A_H,A_T), 00001, SPR) /* ChanWRite CA<-RT */ +APUOP(M_LQD, RI10, 0x1a0, "lqd", _A4(A_T,A_S14,A_P,A_A), 00012, LS) /* LoadQDisp RT<-M[Ra+I10] */ +APUOP(M_BI, RR, 0x1a8, "bi", _A1(A_A), 00010, BR) /* BI IP<-RA */ +APUOP(M_BISL, RR, 0x1a9, "bisl", _A2(A_T,A_A), 00012, BR) /* BISL RT,IP<-IP,RA */ +APUOP(M_IRET, RR, 0x1aa, "iret", _A1(A_A), 00010, BR) /* IRET IP<-SRR0 */ +APUOP(M_IRET2, RR, 0x1aa, "iret", _A0(), 00010, BR) /* IRET IP<-SRR0 */ +APUOP(M_BISLED, RR, 0x1ab, "bisled", _A2(A_T,A_A), 00012, BR) /* BISLED RT,IP<-IP,RA_if(ext) */ +APUOP(M_HBR, LBTI, 0x1ac, "hbr", _A2(A_S11I,A_A), 00010, LS) /* HBR BTB[B9]<-M[Ra] */ +APUOP(M_FREST, RR, 0x1b8, "frest", _A2(A_T,A_A), 00012, SHUF) /* FREST RT<-recip(RA) */ +APUOP(M_FRSQEST, RR, 0x1b9, "frsqest", _A2(A_T,A_A), 00012, SHUF) /* FRSQEST RT<-rsqrt(RA) */ +APUOP(M_FSM, RR, 0x1b4, "fsm", _A2(A_T,A_A), 00012, SHUF) /* FormSelMask% RT<-expand(Ra) */ +APUOP(M_FSMH, RR, 0x1b5, "fsmh", _A2(A_T,A_A), 00012, SHUF) /* FormSelMask% RT<-expand(Ra) */ +APUOP(M_FSMB, RR, 0x1b6, "fsmb", _A2(A_T,A_A), 00012, SHUF) /* FormSelMask% RT<-expand(Ra) */ +APUOP(M_GB, RR, 0x1b0, "gb", _A2(A_T,A_A), 00012, SHUF) /* GatherBits% RT<-gather(RA) */ +APUOP(M_GBH, RR, 0x1b1, "gbh", _A2(A_T,A_A), 00012, SHUF) /* GatherBits% RT<-gather(RA) */ +APUOP(M_GBB, RR, 0x1b2, "gbb", _A2(A_T,A_A), 00012, SHUF) /* GatherBits% RT<-gather(RA) */ +APUOP(M_CBD, RI7, 0x1f4, "cbd", _A4(A_T,A_U7,A_P,A_A), 00012, SHUF) /* genCtl%%insD RT<-sta(Ra+I4,siz) */ +APUOP(M_CHD, RI7, 0x1f5, "chd", _A4(A_T,A_U7,A_P,A_A), 00012, SHUF) /* genCtl%%insD RT<-sta(Ra+I4,siz) */ +APUOP(M_CWD, RI7, 0x1f6, "cwd", _A4(A_T,A_U7,A_P,A_A), 00012, SHUF) /* genCtl%%insD RT<-sta(Ra+I4,siz) */ +APUOP(M_CDD, RI7, 0x1f7, "cdd", _A4(A_T,A_U7,A_P,A_A), 00012, SHUF) /* genCtl%%insD RT<-sta(Ra+I4,siz) */ +APUOP(M_ROTQBII, RI7, 0x1f8, "rotqbii", _A3(A_T,A_A,A_U3), 00012, SHUF) /* ROTQBII RT<-RA<<I10) */ +APUOP(M_CGTHI, RI10, 0x268, "cgthi", _A3(A_T,A_A,A_S10), 00012, FX2) /* CGT%I RT<-(RA>I10) */ +APUOP(M_CGTI, RI10, 0x260, "cgti", _A3(A_T,A_A,A_S10), 00012, FX2) /* CGT%I RT<-(RA>I10) */ +APUOP(M_CLGTBI, RI10, 0x2f0, "clgtbi", _A3(A_T,A_A,A_S10B), 00012, FX2) /* CLGT%I RT<-(RA>I10) */ +APUOP(M_CLGTHI, RI10, 0x2e8, "clgthi", _A3(A_T,A_A,A_S10), 00012, FX2) /* CLGT%I RT<-(RA>I10) */ +APUOP(M_CLGTI, RI10, 0x2e0, "clgti", _A3(A_T,A_A,A_S10), 00012, FX2) /* CLGT%I RT<-(RA>I10) */ +APUOP(M_CEQBI, RI10, 0x3f0, "ceqbi", _A3(A_T,A_A,A_S10B), 00012, FX2) /* CEQ%I RT<-(RA=I10) */ +APUOP(M_CEQHI, RI10, 0x3e8, "ceqhi", _A3(A_T,A_A,A_S10), 00012, FX2) /* CEQ%I RT<-(RA=I10) */ +APUOP(M_CEQI, RI10, 0x3e0, "ceqi", _A3(A_T,A_A,A_S10), 00012, FX2) /* CEQ%I RT<-(RA=I10) */ +APUOP(M_HGTI, RI10, 0x278, "hgti", _A3(A_T,A_A,A_S10), 00010, FX2) /* HaltGTI halt_if(RA>I10) */ +APUOP(M_HGTI2, RI10, 0x278, "hgti", _A2(A_A,A_S10), 00010, FX2) /* HaltGTI halt_if(RA>I10) */ +APUOP(M_HLGTI, RI10, 0x2f8, "hlgti", _A3(A_T,A_A,A_S10), 00010, FX2) /* HaltLGTI halt_if(RA>I10) */ +APUOP(M_HLGTI2, RI10, 0x2f8, "hlgti", _A2(A_A,A_S10), 00010, FX2) /* HaltLGTI halt_if(RA>I10) */ +APUOP(M_HEQI, RI10, 0x3f8, "heqi", _A3(A_T,A_A,A_S10), 00010, FX2) /* HaltEQImm halt_if(RA=I10) */ +APUOP(M_HEQI2, RI10, 0x3f8, "heqi", _A2(A_A,A_S10), 00010, FX2) /* HaltEQImm halt_if(RA=I10) */ +APUOP(M_MPYI, RI10, 0x3a0, "mpyi", _A3(A_T,A_A,A_S10), 00012, FP7) /* MPYI RT<-RA*I10 */ +APUOP(M_MPYUI, RI10, 0x3a8, "mpyui", _A3(A_T,A_A,A_S10), 00012, FP7) /* MPYUI RT<-RA*I10 */ +APUOP(M_CFLTS, RI8, 0x3b0, "cflts", _A3(A_T,A_A,A_U7A), 00012, FP7) /* CFLTS RT<-int(RA,I8) */ +APUOP(M_CFLTU, RI8, 0x3b2, "cfltu", _A3(A_T,A_A,A_U7A), 00012, FP7) /* CFLTU RT<-int(RA,I8) */ +APUOP(M_CSFLT, RI8, 0x3b4, "csflt", _A3(A_T,A_A,A_U7B), 00012, FP7) /* CSFLT RT<-flt(RA,I8) */ +APUOP(M_CUFLT, RI8, 0x3b6, "cuflt", _A3(A_T,A_A,A_U7B), 00012, FP7) /* CUFLT RT<-flt(RA,I8) */ +APUOP(M_FESD, RR, 0x3b8, "fesd", _A2(A_T,A_A), 00012, FPD) /* FESD RT<-double(RA) */ +APUOP(M_FRDS, RR, 0x3b9, "frds", _A2(A_T,A_A), 00012, FPD) /* FRDS RT<-single(RA) */ +APUOP(M_FSCRRD, RR, 0x398, "fscrrd", _A1(A_T), 00002, FPD) /* FSCRRD RT<-FP_status */ +APUOP(M_FSCRWR, RR, 0x3ba, "fscrwr", _A2(A_T,A_A), 00010, FP7) /* FSCRWR FP_status<-RA */ +APUOP(M_FSCRWR2, RR, 0x3ba, "fscrwr", _A1(A_A), 00010, FP7) /* FSCRWR FP_status<-RA */ +APUOP(M_CLZ, RR, 0x2a5, "clz", _A2(A_T,A_A), 00012, FX2) /* CLZ RT<-clz(RA) */ +APUOP(M_CNTB, RR, 0x2b4, "cntb", _A2(A_T,A_A), 00012, FXB) /* CNT RT<-pop(RA) */ +APUOP(M_XSBH, RR, 0x2b6, "xsbh", _A2(A_T,A_A), 00012, FX2) /* eXtSignBtoH RT<-sign_ext(RA) */ +APUOP(M_XSHW, RR, 0x2ae, "xshw", _A2(A_T,A_A), 00012, FX2) /* eXtSignHtoW RT<-sign_ext(RA) */ +APUOP(M_XSWD, RR, 0x2a6, "xswd", _A2(A_T,A_A), 00012, FX2) /* eXtSignWtoD RT<-sign_ext(RA) */ +APUOP(M_ROTI, RI7, 0x078, "roti", _A3(A_T,A_A,A_S7N), 00012, FX3) /* ROT%I RT<-RA<<RB) */ +APUOP(M_CGTB, RR, 0x250, "cgtb", _A3(A_T,A_A,A_B), 00112, FX2) /* CGT% RT<-(RA>RB) */ +APUOP(M_CGTH, RR, 0x248, "cgth", _A3(A_T,A_A,A_B), 00112, FX2) /* CGT% RT<-(RA>RB) */ +APUOP(M_CLGT, RR, 0x2c0, "clgt", _A3(A_T,A_A,A_B), 00112, FX2) /* CLGT% RT<-(RA>RB) */ +APUOP(M_CLGTB, RR, 0x2d0, "clgtb", _A3(A_T,A_A,A_B), 00112, FX2) /* CLGT% RT<-(RA>RB) */ +APUOP(M_CLGTH, RR, 0x2c8, "clgth", _A3(A_T,A_A,A_B), 00112, FX2) /* CLGT% RT<-(RA>RB) */ +APUOP(M_CEQ, RR, 0x3c0, "ceq", _A3(A_T,A_A,A_B), 00112, FX2) /* CEQ% RT<-(RA=RB) */ +APUOP(M_CEQB, RR, 0x3d0, "ceqb", _A3(A_T,A_A,A_B), 00112, FX2) /* CEQ% RT<-(RA=RB) */ +APUOP(M_CEQH, RR, 0x3c8, "ceqh", _A3(A_T,A_A,A_B), 00112, FX2) /* CEQ% RT<-(RA=RB) */ +APUOP(M_HGT, RR, 0x258, "hgt", _A3(A_T,A_A,A_B), 00110, FX2) /* HaltGT halt_if(RA>RB) */ +APUOP(M_HGT2, RR, 0x258, "hgt", _A2(A_A,A_B), 00110, FX2) /* HaltGT halt_if(RA>RB) */ +APUOP(M_HLGT, RR, 0x2d8, "hlgt", _A3(A_T,A_A,A_B), 00110, FX2) /* HaltLGT halt_if(RA>RB) */ +APUOP(M_HLGT2, RR, 0x2d8, "hlgt", _A2(A_A,A_B), 00110, FX2) /* HaltLGT halt_if(RA>RB) */ +APUOP(M_HEQ, RR, 0x3d8, "heq", _A3(A_T,A_A,A_B), 00110, FX2) /* HaltEQ halt_if(RA=RB) */ +APUOP(M_HEQ2, RR, 0x3d8, "heq", _A2(A_A,A_B), 00110, FX2) /* HaltEQ halt_if(RA=RB) */ +APUOP(M_FCEQ, RR, 0x3c2, "fceq", _A3(A_T,A_A,A_B), 00112, FX2) /* FCEQ RT<-(RA=RB) */ +APUOP(M_FCMEQ, RR, 0x3ca, "fcmeq", _A3(A_T,A_A,A_B), 00112, FX2) /* FCMEQ RT<-(|RA|=|RB|) */ +APUOP(M_FCGT, RR, 0x2c2, "fcgt", _A3(A_T,A_A,A_B), 00112, FX2) /* FCGT RT<-(RA>16 */ +APUOP(M_MPYU, RR, 0x3cc, "mpyu", _A3(A_T,A_A,A_B), 00112, FP7) /* MPYU RT<-RA*RB */ +APUOP(M_FI, RR, 0x3d4, "fi", _A3(A_T,A_A,A_B), 00112, FP7) /* FInterpolate RT<-f(RA,RB) */ +APUOP(M_ROT, RR, 0x058, "rot", _A3(A_T,A_A,A_B), 00112, FX3) /* ROT% RT<-RA<<> (32-size)) +#define UNSIGNED_EXTRACT(insn,size,pos) (((insn) >> pos) & ((1 << size)-1)) + +#define DECODE_INSN_RT(insn) (insn & 0x7f) +#define DECODE_INSN_RA(insn) ((insn >> 7) & 0x7f) +#define DECODE_INSN_RB(insn) ((insn >> 14) & 0x7f) +#define DECODE_INSN_RC(insn) ((insn >> 21) & 0x7f) + +#define DECODE_INSN_I10(insn) SIGNED_EXTRACT(insn,10,14) +#define DECODE_INSN_U10(insn) UNSIGNED_EXTRACT(insn,10,14) + +/* For branching, immediate loads, hbr and lqa/stqa. */ +#define DECODE_INSN_I16(insn) SIGNED_EXTRACT(insn,16,7) +#define DECODE_INSN_U16(insn) UNSIGNED_EXTRACT(insn,16,7) + +/* for stop */ +#define DECODE_INSN_U14(insn) UNSIGNED_EXTRACT(insn,14,0) + +/* For ila */ +#define DECODE_INSN_I18(insn) SIGNED_EXTRACT(insn,18,7) +#define DECODE_INSN_U18(insn) UNSIGNED_EXTRACT(insn,18,7) + +/* For rotate and shift and generate control mask */ +#define DECODE_INSN_I7(insn) SIGNED_EXTRACT(insn,7,14) +#define DECODE_INSN_U7(insn) UNSIGNED_EXTRACT(insn,7,14) + +/* For float <-> int conversion */ +#define DECODE_INSN_I8(insn) SIGNED_EXTRACT(insn,8,14) +#define DECODE_INSN_U8(insn) UNSIGNED_EXTRACT(insn,8,14) + +/* For hbr */ +#define DECODE_INSN_I9a(insn) ((SIGNED_EXTRACT(insn,2,23) << 7) | UNSIGNED_EXTRACT(insn,7,0)) +#define DECODE_INSN_I9b(insn) ((SIGNED_EXTRACT(insn,2,14) << 7) | UNSIGNED_EXTRACT(insn,7,0)) +#define DECODE_INSN_U9a(insn) ((UNSIGNED_EXTRACT(insn,2,23) << 7) | UNSIGNED_EXTRACT(insn,7,0)) +#define DECODE_INSN_U9b(insn) ((UNSIGNED_EXTRACT(insn,2,14) << 7) | UNSIGNED_EXTRACT(insn,7,0)) + -- cgit v1.2.3-70-g09d2 From af89fb8041562508895c8f3ba04790d7c2f4338c Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Thu, 23 Nov 2006 00:46:44 +0100 Subject: [POWERPC] Add spu disassembly to xmon This patch adds a "sdi" command to xmon, to disassemble the contents of an spu's local store. Signed-off-by: Michael Ellerman Signed-off-by: Arnd Bergmann --- arch/powerpc/xmon/Makefile | 1 + arch/powerpc/xmon/xmon.c | 35 +++++++++++++++++++++++++++-------- 2 files changed, 28 insertions(+), 8 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/xmon/Makefile b/arch/powerpc/xmon/Makefile index 109d874ecfb..4f274056e77 100644 --- a/arch/powerpc/xmon/Makefile +++ b/arch/powerpc/xmon/Makefile @@ -5,3 +5,4 @@ EXTRA_CFLAGS += -mno-minimal-toc endif obj-y += xmon.o ppc-dis.o ppc-opc.o setjmp.o start.o \ nonstdio.o +obj-$(CONFIG_PPC_CELL) += spu-dis.o spu-opc.o diff --git a/arch/powerpc/xmon/xmon.c b/arch/powerpc/xmon/xmon.c index a39b17638b7..7a0eec23cb9 100644 --- a/arch/powerpc/xmon/xmon.c +++ b/arch/powerpc/xmon/xmon.c @@ -155,6 +155,7 @@ static int do_spu_cmd(void); int xmon_no_auto_backtrace; extern int print_insn_powerpc(unsigned long insn, unsigned long memaddr); +extern int print_insn_spu(unsigned long insn, unsigned long memaddr); extern void xmon_enter(void); extern void xmon_leave(void); @@ -219,7 +220,8 @@ Commands:\n\ " ss stop execution on all spus\n\ sr restore execution on stopped spus\n\ sf # dump spu fields for spu # (in hex)\n\ - sd # dump spu local store for spu # (in hex)\n" + sd # dump spu local store for spu # (in hex)\ + sdi # disassemble spu local store for spu # (in hex)\n" #endif " S print special registers\n\ t print backtrace\n\ @@ -2828,7 +2830,13 @@ static void dump_spu_fields(struct spu *spu) DUMP_FIELD(spu, "0x%p", priv2); } -static void dump_spu_ls(unsigned long num) +int +spu_inst_dump(unsigned long adr, long count, int praddr) +{ + return generic_inst_dump(adr, count, praddr, print_insn_spu); +} + +static void dump_spu_ls(unsigned long num, int subcmd) { unsigned long offset, addr, ls_addr; @@ -2855,9 +2863,17 @@ static void dump_spu_ls(unsigned long num) return; } - prdump(addr, 64); - addr += 64; - last_cmd = "sd\n"; + switch (subcmd) { + case 'i': + addr += spu_inst_dump(addr, 16, 1); + last_cmd = "sdi\n"; + break; + default: + prdump(addr, 64); + addr += 64; + last_cmd = "sd\n"; + break; + } spu_info[num].dump_addr = addr; } @@ -2865,7 +2881,7 @@ static void dump_spu_ls(unsigned long num) static int do_spu_cmd(void) { static unsigned long num = 0; - int cmd; + int cmd, subcmd = 0; cmd = inchar(); switch (cmd) { @@ -2875,8 +2891,11 @@ static int do_spu_cmd(void) case 'r': restart_spus(); break; - case 'f': case 'd': + subcmd = inchar(); + if (isxdigit(subcmd) || subcmd == '\n') + termch = subcmd; + case 'f': scanhex(&num); if (num >= XMON_NUM_SPUS || !spu_info[num].spu) { printf("*** Error: invalid spu number\n"); @@ -2888,7 +2907,7 @@ static int do_spu_cmd(void) dump_spu_fields(spu_info[num].spu); break; default: - dump_spu_ls(num); + dump_spu_ls(num, subcmd); break; } -- cgit v1.2.3-70-g09d2 From e0426047cb684842700f0098f74842a38260dbae Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Thu, 23 Nov 2006 00:46:45 +0100 Subject: [POWERPC] Make xmon disassembly optional While adding spu disassembly support it struck me that we're actually carrying quite a lot of code around, just to do disassembly in the case of a crash. While on large systems it's not an issue, on smaller ones it might be nice to have xmon - but without the weight of the disassembly support. For a Cell build this saves ~230KB (!), and for pSeries ~195KB. We still support the 'di' and 'sdi' commands, however they just dump the instruction in hex. Move the definitions into a header to clean xmon.c just a tiny bit. Signed-off-by: Michael Ellerman Signed-off-by: Arnd Bergmann --- arch/powerpc/Kconfig.debug | 9 +++++++++ arch/powerpc/xmon/Makefile | 8 ++++++-- arch/powerpc/xmon/dis-asm.h | 31 +++++++++++++++++++++++++++++++ arch/powerpc/xmon/ppc-dis.c | 3 +-- arch/powerpc/xmon/spu-dis.c | 3 +-- arch/powerpc/xmon/xmon.c | 5 +---- 6 files changed, 49 insertions(+), 10 deletions(-) create mode 100644 arch/powerpc/xmon/dis-asm.h (limited to 'arch/powerpc') diff --git a/arch/powerpc/Kconfig.debug b/arch/powerpc/Kconfig.debug index 5ad149b47e3..ff16063d67f 100644 --- a/arch/powerpc/Kconfig.debug +++ b/arch/powerpc/Kconfig.debug @@ -98,6 +98,15 @@ config XMON_DEFAULT xmon is normally disabled unless booted with 'xmon=on'. Use 'xmon=off' to disable xmon init during runtime. +config XMON_DISASSEMBLY + bool "Include disassembly support in xmon" + depends on XMON + default y + help + Include support for disassembling in xmon. You probably want + to say Y here, unless you're building for a memory-constrained + system. + config IRQSTACKS bool "Use separate kernel stacks when processing interrupts" depends on PPC64 diff --git a/arch/powerpc/xmon/Makefile b/arch/powerpc/xmon/Makefile index 4f274056e77..69303575d3d 100644 --- a/arch/powerpc/xmon/Makefile +++ b/arch/powerpc/xmon/Makefile @@ -3,6 +3,10 @@ ifdef CONFIG_PPC64 EXTRA_CFLAGS += -mno-minimal-toc endif -obj-y += xmon.o ppc-dis.o ppc-opc.o setjmp.o start.o \ - nonstdio.o + +obj-y += xmon.o setjmp.o start.o nonstdio.o + +ifdef CONFIG_XMON_DISASSEMBLY +obj-y += ppc-dis.o ppc-opc.o obj-$(CONFIG_PPC_CELL) += spu-dis.o spu-opc.o +endif diff --git a/arch/powerpc/xmon/dis-asm.h b/arch/powerpc/xmon/dis-asm.h new file mode 100644 index 00000000000..be3533b93f3 --- /dev/null +++ b/arch/powerpc/xmon/dis-asm.h @@ -0,0 +1,31 @@ +#ifndef _POWERPC_XMON_DIS_ASM_H +#define _POWERPC_XMON_DIS_ASM_H +/* + * Copyright (C) 2006 Michael Ellerman, IBM Corporation. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +extern void print_address (unsigned long memaddr); + +#ifdef CONFIG_XMON_DISASSEMBLY +extern int print_insn_powerpc(unsigned long insn, unsigned long memaddr); +extern int print_insn_spu(unsigned long insn, unsigned long memaddr); +#else +static inline int print_insn_powerpc(unsigned long insn, unsigned long memaddr) +{ + printf("%.8x", insn); + return 0; +} + +static inline int print_insn_spu(unsigned long insn, unsigned long memaddr) +{ + printf("%.8x", insn); + return 0; +} +#endif + +#endif /* _POWERPC_XMON_DIS_ASM_H */ diff --git a/arch/powerpc/xmon/ppc-dis.c b/arch/powerpc/xmon/ppc-dis.c index 3b67bee4830..08652742fa7 100644 --- a/arch/powerpc/xmon/ppc-dis.c +++ b/arch/powerpc/xmon/ppc-dis.c @@ -21,8 +21,7 @@ Software Foundation, 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. * #include "nonstdio.h" #include "ansidecl.h" #include "ppc.h" - -extern void print_address (unsigned long memaddr); +#include "dis-asm.h" /* Print a PowerPC or POWER instruction. */ diff --git a/arch/powerpc/xmon/spu-dis.c b/arch/powerpc/xmon/spu-dis.c index 75ac0815f1a..ee929c641bf 100644 --- a/arch/powerpc/xmon/spu-dis.c +++ b/arch/powerpc/xmon/spu-dis.c @@ -22,8 +22,7 @@ #include "nonstdio.h" #include "ansidecl.h" #include "spu.h" - -extern void print_address (unsigned long memaddr); +#include "dis-asm.h" /* This file provides a disassembler function which uses the disassembler interface defined in dis-asm.h. */ diff --git a/arch/powerpc/xmon/xmon.c b/arch/powerpc/xmon/xmon.c index 7a0eec23cb9..c999638cc2d 100644 --- a/arch/powerpc/xmon/xmon.c +++ b/arch/powerpc/xmon/xmon.c @@ -47,6 +47,7 @@ #endif #include "nonstdio.h" +#include "dis-asm.h" #define scanhex xmon_scanhex #define skipbl xmon_skipbl @@ -110,7 +111,6 @@ static int bsesc(void); static void dump(void); static void prdump(unsigned long, long); static int ppc_inst_dump(unsigned long, long, int); -void print_address(unsigned long); static void backtrace(struct pt_regs *); static void excprint(struct pt_regs *); static void prregs(struct pt_regs *); @@ -154,9 +154,6 @@ static int do_spu_cmd(void); int xmon_no_auto_backtrace; -extern int print_insn_powerpc(unsigned long insn, unsigned long memaddr); -extern int print_insn_spu(unsigned long insn, unsigned long memaddr); - extern void xmon_enter(void); extern void xmon_leave(void); -- cgit v1.2.3-70-g09d2 From 897f112bb42ed9e220ce441e7e52aba3a144a7d6 Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Thu, 23 Nov 2006 00:46:47 +0100 Subject: [POWERPC] Import updated version of ppc disassembly code for xmon This includes: * version 1.24 of ppc-dis.c * version 1.88 of ppc-opc.c * version 1.23 of ppc.h I can't vouch for the accuracy etc. of these changes, but it brings us into line with binutils - and from a cursory test appears to work fine. Signed-off-by: Michael Ellerman Signed-off-by: Arnd Bergmann --- arch/powerpc/xmon/ppc-dis.c | 20 +- arch/powerpc/xmon/ppc-opc.c | 778 ++++++++++++++++++++++++++++++++------------ arch/powerpc/xmon/ppc.h | 39 ++- 3 files changed, 618 insertions(+), 219 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/xmon/ppc-dis.c b/arch/powerpc/xmon/ppc-dis.c index 08652742fa7..89098f320ad 100644 --- a/arch/powerpc/xmon/ppc-dis.c +++ b/arch/powerpc/xmon/ppc-dis.c @@ -1,5 +1,6 @@ /* ppc-dis.c -- Disassemble PowerPC instructions - Copyright 1994 Free Software Foundation, Inc. + Copyright 1994, 1995, 2000, 2001, 2002, 2003, 2004, 2005, 2006 + Free Software Foundation, Inc. Written by Ian Lance Taylor, Cygnus Support This file is part of GDB, GAS, and the GNU binutils. @@ -16,8 +17,9 @@ the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this file; see the file COPYING. If not, write to the Free -Software Foundation, 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ +Software Foundation, 51 Franklin Street - Fifth Floor, Boston, MA 02110-1301, USA. */ +#include #include "nonstdio.h" #include "ansidecl.h" #include "ppc.h" @@ -36,6 +38,15 @@ print_insn_powerpc (unsigned long insn, unsigned long memaddr) dialect = PPC_OPCODE_PPC | PPC_OPCODE_CLASSIC | PPC_OPCODE_COMMON | PPC_OPCODE_64 | PPC_OPCODE_POWER4 | PPC_OPCODE_ALTIVEC; + if (cpu_has_feature(CPU_FTRS_POWER5)) + dialect |= PPC_OPCODE_POWER5; + + if (cpu_has_feature(CPU_FTRS_CELL)) + dialect |= PPC_OPCODE_CELL | PPC_OPCODE_ALTIVEC; + + if (cpu_has_feature(CPU_FTRS_POWER6)) + dialect |= PPC_OPCODE_POWER5 | PPC_OPCODE_POWER6 | PPC_OPCODE_ALTIVEC; + /* Get the major opcode of the instruction. */ op = PPC_OP (insn); @@ -120,7 +131,8 @@ print_insn_powerpc (unsigned long insn, unsigned long memaddr) } /* Print the operand as directed by the flags. */ - if ((operand->flags & PPC_OPERAND_GPR) != 0) + if ((operand->flags & PPC_OPERAND_GPR) != 0 + || ((operand->flags & PPC_OPERAND_GPR_0) != 0 && value != 0)) printf("r%ld", value); else if ((operand->flags & PPC_OPERAND_FPR) != 0) printf("f%ld", value); @@ -136,7 +148,7 @@ print_insn_powerpc (unsigned long insn, unsigned long memaddr) else { if (operand->bits == 3) - printf("cr%d", value); + printf("cr%ld", value); else { static const char *cbnames[4] = { "lt", "gt", "eq", "so" }; diff --git a/arch/powerpc/xmon/ppc-opc.c b/arch/powerpc/xmon/ppc-opc.c index 5ee8fc32f82..5d841f4b353 100644 --- a/arch/powerpc/xmon/ppc-opc.c +++ b/arch/powerpc/xmon/ppc-opc.c @@ -1,6 +1,6 @@ /* ppc-opc.c -- PowerPC opcode list - Copyright 1994, 1995, 1996, 1997, 1998, 2000, 2001, 2002, 2003 - Free Software Foundation, Inc. + Copyright 1994, 1995, 1996, 1997, 1998, 2000, 2001, 2002, 2003, 2004, + 2005 Free Software Foundation, Inc. Written by Ian Lance Taylor, Cygnus Support This file is part of GDB, GAS, and the GNU binutils. @@ -17,8 +17,8 @@ You should have received a copy of the GNU General Public License along with this file; see the file COPYING. If not, write to the Free - Software Foundation, 59 Temple Place - Suite 330, Boston, MA - 02111-1307, USA. */ + Software Foundation, 51 Franklin Street - Fifth Floor, Boston, MA + 02110-1301, USA. */ #include #include "nonstdio.h" @@ -86,6 +86,8 @@ static unsigned long insert_sh6 (unsigned long, long, int, const char **); static long extract_sh6 (unsigned long, int, int *); static unsigned long insert_spr (unsigned long, long, int, const char **); static long extract_spr (unsigned long, int, int *); +static unsigned long insert_sprg (unsigned long, long, int, const char **); +static long extract_sprg (unsigned long, int, int *); static unsigned long insert_tbr (unsigned long, long, int, const char **); static long extract_tbr (unsigned long, int, int *); static unsigned long insert_ev2 (unsigned long, long, int, const char **); @@ -196,8 +198,11 @@ const struct powerpc_operand powerpc_operands[] = #define BOE BO + 1 { 5, 21, insert_boe, extract_boe, 0 }, +#define BH BOE + 1 + { 2, 11, NULL, NULL, PPC_OPERAND_OPTIONAL }, + /* The BT field in an X or XL form instruction. */ -#define BT BOE + 1 +#define BT BH + 1 { 5, 21, NULL, NULL, PPC_OPERAND_CR }, /* The condition register number portion of the BI field in a B form @@ -301,10 +306,14 @@ const struct powerpc_operand powerpc_operands[] = #define L FXM4 + 1 { 1, 21, NULL, NULL, PPC_OPERAND_OPTIONAL }, - /* The LEV field in a POWER SC form instruction. */ -#define LEV L + 1 + /* The LEV field in a POWER SVC form instruction. */ +#define SVC_LEV L + 1 { 7, 5, NULL, NULL, 0 }, + /* The LEV field in an SC form instruction. */ +#define LEV SVC_LEV + 1 + { 7, 5, NULL, NULL, PPC_OPERAND_OPTIONAL }, + /* The LI field in an I form instruction. The lower two bits are forced to zero. */ #define LI LEV + 1 @@ -346,7 +355,7 @@ const struct powerpc_operand powerpc_operands[] = /* The MO field in an mbar instruction. */ #define MO MB6 + 1 - { 5, 21, NULL, NULL, 0 }, + { 5, 21, NULL, NULL, PPC_OPERAND_OPTIONAL }, /* The NB field in an X form instruction. The value 32 is stored as 0. */ @@ -364,30 +373,38 @@ const struct powerpc_operand powerpc_operands[] = #define RA_MASK (0x1f << 16) { 5, 16, NULL, NULL, PPC_OPERAND_GPR }, + /* As above, but 0 in the RA field means zero, not r0. */ +#define RA0 RA + 1 + { 5, 16, NULL, NULL, PPC_OPERAND_GPR_0 }, + /* The RA field in the DQ form lq instruction, which has special value restrictions. */ -#define RAQ RA + 1 - { 5, 16, insert_raq, NULL, PPC_OPERAND_GPR }, +#define RAQ RA0 + 1 + { 5, 16, insert_raq, NULL, PPC_OPERAND_GPR_0 }, /* The RA field in a D or X form instruction which is an updating load, which means that the RA field may not be zero and may not equal the RT field. */ #define RAL RAQ + 1 - { 5, 16, insert_ral, NULL, PPC_OPERAND_GPR }, + { 5, 16, insert_ral, NULL, PPC_OPERAND_GPR_0 }, /* The RA field in an lmw instruction, which has special value restrictions. */ #define RAM RAL + 1 - { 5, 16, insert_ram, NULL, PPC_OPERAND_GPR }, + { 5, 16, insert_ram, NULL, PPC_OPERAND_GPR_0 }, /* The RA field in a D or X form instruction which is an updating store or an updating floating point load, which means that the RA field may not be zero. */ #define RAS RAM + 1 - { 5, 16, insert_ras, NULL, PPC_OPERAND_GPR }, + { 5, 16, insert_ras, NULL, PPC_OPERAND_GPR_0 }, + + /* The RA field of the tlbwe instruction, which is optional. */ +#define RAOPT RAS + 1 + { 5, 16, NULL, NULL, PPC_OPERAND_GPR | PPC_OPERAND_OPTIONAL }, /* The RB field in an X, XO, M, or MDS form instruction. */ -#define RB RAS + 1 +#define RB RAOPT + 1 #define RB_MASK (0x1f << 11) { 5, 11, NULL, NULL, PPC_OPERAND_GPR }, @@ -408,15 +425,20 @@ const struct powerpc_operand powerpc_operands[] = /* The RS field of the DS form stq instruction, which has special value restrictions. */ #define RSQ RS + 1 - { 5, 21, insert_rsq, NULL, PPC_OPERAND_GPR }, + { 5, 21, insert_rsq, NULL, PPC_OPERAND_GPR_0 }, /* The RT field of the DQ form lq instruction, which has special value restrictions. */ #define RTQ RSQ + 1 - { 5, 21, insert_rtq, NULL, PPC_OPERAND_GPR }, + { 5, 21, insert_rtq, NULL, PPC_OPERAND_GPR_0 }, + + /* The RS field of the tlbwe instruction, which is optional. */ +#define RSO RTQ + 1 +#define RTO RSO + { 5, 21, NULL, NULL, PPC_OPERAND_GPR | PPC_OPERAND_OPTIONAL }, /* The SH field in an X or M form instruction. */ -#define SH RTQ + 1 +#define SH RSO + 1 #define SH_MASK (0x1f << 11) { 5, 11, NULL, NULL, 0 }, @@ -425,8 +447,12 @@ const struct powerpc_operand powerpc_operands[] = #define SH6_MASK ((0x1f << 11) | (1 << 1)) { 6, 1, insert_sh6, extract_sh6, 0 }, + /* The SH field of the tlbwe instruction, which is optional. */ +#define SHO SH6 + 1 + { 5, 11,NULL, NULL, PPC_OPERAND_OPTIONAL }, + /* The SI field in a D form instruction. */ -#define SI SH6 + 1 +#define SI SHO + 1 { 16, 0, NULL, NULL, PPC_OPERAND_SIGNED }, /* The SI field in a D form instruction when we accept a wide range @@ -448,8 +474,7 @@ const struct powerpc_operand powerpc_operands[] = /* The SPRG register number in an XFX form m[ft]sprg instruction. */ #define SPRG SPRBAT + 1 -#define SPRG_MASK (0x3 << 16) - { 2, 16, NULL, NULL, 0 }, + { 5, 16, insert_sprg, extract_sprg, 0 }, /* The SR field in an X form instruction. */ #define SR SPRG + 1 @@ -536,10 +561,45 @@ const struct powerpc_operand powerpc_operands[] = #define WS_MASK (0x7 << 11) { 3, 11, NULL, NULL, 0 }, - /* The L field in an mtmsrd instruction */ + /* The L field in an mtmsrd or A form instruction. */ #define MTMSRD_L WS + 1 +#define A_L MTMSRD_L { 1, 16, NULL, NULL, PPC_OPERAND_OPTIONAL }, + /* The DCM field in a Z form instruction. */ +#define DCM MTMSRD_L + 1 + { 6, 16, NULL, NULL, 0 }, + + /* Likewise, the DGM field in a Z form instruction. */ +#define DGM DCM + 1 + { 6, 16, NULL, NULL, 0 }, + +#define TE DGM + 1 + { 5, 11, NULL, NULL, 0 }, + +#define RMC TE + 1 + { 2, 21, NULL, NULL, 0 }, + +#define R RMC + 1 + { 1, 15, NULL, NULL, 0 }, + +#define SP R + 1 + { 2, 11, NULL, NULL, 0 }, + +#define S SP + 1 + { 1, 11, NULL, NULL, 0 }, + + /* SH field starting at bit position 16. */ +#define SH16 S + 1 + { 6, 10, NULL, NULL, 0 }, + + /* The L field in an X form with the RT field fixed instruction. */ +#define XRT_L SH16 + 1 + { 2, 21, NULL, NULL, PPC_OPERAND_OPTIONAL }, + + /* The EH field in larx instruction. */ +#define EH XRT_L + 1 + { 1, 0, NULL, NULL, PPC_OPERAND_OPTIONAL }, }; /* The functions used to insert and extract complicated operands. */ @@ -550,7 +610,6 @@ const struct powerpc_operand powerpc_operands[] = and the extraction function just checks that the fields are the same. */ -/*ARGSUSED*/ static unsigned long insert_bat (unsigned long insn, long value ATTRIBUTE_UNUSED, @@ -576,7 +635,6 @@ extract_bat (unsigned long insn, and the extraction function just checks that the fields are the same. */ -/*ARGSUSED*/ static unsigned long insert_bba (unsigned long insn, long value ATTRIBUTE_UNUSED, @@ -599,7 +657,6 @@ extract_bba (unsigned long insn, /* The BD field in a B form instruction. The lower two bits are forced to zero. */ -/*ARGSUSED*/ static unsigned long insert_bd (unsigned long insn, long value, @@ -609,7 +666,6 @@ insert_bd (unsigned long insn, return insn | (value & 0xfffc); } -/*ARGSUSED*/ static long extract_bd (unsigned long insn, int dialect ATTRIBUTE_UNUSED, @@ -631,7 +687,6 @@ extract_bd (unsigned long insn, in BO field, the "a" bit is 00010 for branch on CR(BI) and 01000 for branch on CTR. We only handle the taken/not-taken hint here. */ -/*ARGSUSED*/ static unsigned long insert_bdm (unsigned long insn, long value, @@ -677,7 +732,6 @@ extract_bdm (unsigned long insn, This is like BDM, above, except that the branch is expected to be taken. */ -/*ARGSUSED*/ static unsigned long insert_bdp (unsigned long insn, long value, @@ -831,7 +885,6 @@ extract_boe (unsigned long insn, /* The DQ field in a DQ form instruction. This is like D, but the lower four bits are forced to zero. */ -/*ARGSUSED*/ static unsigned long insert_dq (unsigned long insn, long value, @@ -843,7 +896,6 @@ insert_dq (unsigned long insn, return insn | (value & 0xfff0); } -/*ARGSUSED*/ static long extract_dq (unsigned long insn, int dialect ATTRIBUTE_UNUSED, @@ -918,7 +970,6 @@ extract_ev8 (unsigned long insn, /* The DS field in a DS form instruction. This is like D, but the lower two bits are forced to zero. */ -/*ARGSUSED*/ static unsigned long insert_ds (unsigned long insn, long value, @@ -930,7 +981,6 @@ insert_ds (unsigned long insn, return insn | (value & 0xfffc); } -/*ARGSUSED*/ static long extract_ds (unsigned long insn, int dialect ATTRIBUTE_UNUSED, @@ -941,7 +991,6 @@ extract_ds (unsigned long insn, /* The DE field in a DE form instruction. */ -/*ARGSUSED*/ static unsigned long insert_de (unsigned long insn, long value, @@ -953,7 +1002,6 @@ insert_de (unsigned long insn, return insn | ((value << 4) & 0xfff0); } -/*ARGSUSED*/ static long extract_de (unsigned long insn, int dialect ATTRIBUTE_UNUSED, @@ -964,7 +1012,6 @@ extract_de (unsigned long insn, /* The DES field in a DES form instruction. */ -/*ARGSUSED*/ static unsigned long insert_des (unsigned long insn, long value, @@ -978,7 +1025,6 @@ insert_des (unsigned long insn, return insn | ((value << 2) & 0xfff0); } -/*ARGSUSED*/ static long extract_des (unsigned long insn, int dialect ATTRIBUTE_UNUSED, @@ -995,17 +1041,33 @@ insert_fxm (unsigned long insn, int dialect, const char **errmsg) { + /* If we're handling the mfocrf and mtocrf insns ensure that exactly + one bit of the mask field is set. */ + if ((insn & (1 << 20)) != 0) + { + if (value == 0 || (value & -value) != value) + { + *errmsg = _("invalid mask field"); + value = 0; + } + } + /* If the optional field on mfcr is missing that means we want to use the old form of the instruction that moves the whole cr. In that case we'll have VALUE zero. There doesn't seem to be a way to distinguish this from the case where someone writes mfcr %r3,0. */ - if (value == 0) + else if (value == 0) ; /* If only one bit of the FXM field is set, we can use the new form of the instruction, which is faster. Unlike the Power4 branch hint - encoding, this is not backward compatible. */ - else if ((dialect & PPC_OPCODE_POWER4) != 0 && (value & -value) == value) + encoding, this is not backward compatible. Do not generate the + new form unless -mpower4 has been given, or -many and the two + operand form of mfcr was used. */ + else if ((value & -value) == value + && ((dialect & PPC_OPCODE_POWER4) != 0 + || ((dialect & PPC_OPCODE_ANY) != 0 + && (insn & (0x3ff << 1)) == 19 << 1))) insn |= 1 << 20; /* Any other value on mfcr is an error. */ @@ -1020,7 +1082,7 @@ insert_fxm (unsigned long insn, static long extract_fxm (unsigned long insn, - int dialect, + int dialect ATTRIBUTE_UNUSED, int *invalid) { long mask = (insn >> 12) & 0xff; @@ -1028,14 +1090,9 @@ extract_fxm (unsigned long insn, /* Is this a Power4 insn? */ if ((insn & (1 << 20)) != 0) { - if ((dialect & PPC_OPCODE_POWER4) == 0) + /* Exactly one bit of MASK should be set. */ + if (mask == 0 || (mask & -mask) != mask) *invalid = 1; - else - { - /* Exactly one bit of MASK should be set. */ - if (mask == 0 || (mask & -mask) != mask) - *invalid = 1; - } } /* Check that non-power4 form of mfcr has a zero MASK. */ @@ -1051,7 +1108,6 @@ extract_fxm (unsigned long insn, /* The LI field in an I form instruction. The lower two bits are forced to zero. */ -/*ARGSUSED*/ static unsigned long insert_li (unsigned long insn, long value, @@ -1063,7 +1119,6 @@ insert_li (unsigned long insn, return insn | (value & 0x3fffffc); } -/*ARGSUSED*/ static long extract_li (unsigned long insn, int dialect ATTRIBUTE_UNUSED, @@ -1163,7 +1218,6 @@ extract_mbe (unsigned long insn, /* The MB or ME field in an MD or MDS form instruction. The high bit is wrapped to the low end. */ -/*ARGSUSED*/ static unsigned long insert_mb6 (unsigned long insn, long value, @@ -1173,7 +1227,6 @@ insert_mb6 (unsigned long insn, return insn | ((value & 0x1f) << 6) | (value & 0x20); } -/*ARGSUSED*/ static long extract_mb6 (unsigned long insn, int dialect ATTRIBUTE_UNUSED, @@ -1198,7 +1251,6 @@ insert_nb (unsigned long insn, return insn | ((value & 0x1f) << 11); } -/*ARGSUSED*/ static long extract_nb (unsigned long insn, int dialect ATTRIBUTE_UNUSED, @@ -1217,7 +1269,6 @@ extract_nb (unsigned long insn, invalid, since we never want to recognize an instruction which uses a field of this type. */ -/*ARGSUSED*/ static unsigned long insert_nsi (unsigned long insn, long value, @@ -1269,7 +1320,6 @@ insert_ram (unsigned long insn, /* The RA field in the DQ form lq instruction, which has special value restrictions. */ -/*ARGSUSED*/ static unsigned long insert_raq (unsigned long insn, long value, @@ -1304,7 +1354,6 @@ insert_ras (unsigned long insn, function just copies the BT field into the BA field, and the extraction function just checks that the fields are the same. */ -/*ARGSUSED*/ static unsigned long insert_rbs (unsigned long insn, long value ATTRIBUTE_UNUSED, @@ -1327,7 +1376,6 @@ extract_rbs (unsigned long insn, /* The RT field of the DQ form lq instruction, which has special value restrictions. */ -/*ARGSUSED*/ static unsigned long insert_rtq (unsigned long insn, long value, @@ -1342,7 +1390,6 @@ insert_rtq (unsigned long insn, /* The RS field of the DS form stq instruction, which has special value restrictions. */ -/*ARGSUSED*/ static unsigned long insert_rsq (unsigned long insn, long value ATTRIBUTE_UNUSED, @@ -1356,7 +1403,6 @@ insert_rsq (unsigned long insn, /* The SH field in an MD form instruction. This is split. */ -/*ARGSUSED*/ static unsigned long insert_sh6 (unsigned long insn, long value, @@ -1366,7 +1412,6 @@ insert_sh6 (unsigned long insn, return insn | ((value & 0x1f) << 11) | ((value & 0x20) >> 4); } -/*ARGSUSED*/ static long extract_sh6 (unsigned long insn, int dialect ATTRIBUTE_UNUSED, @@ -1395,6 +1440,47 @@ extract_spr (unsigned long insn, return ((insn >> 16) & 0x1f) | ((insn >> 6) & 0x3e0); } +/* Some dialects have 8 SPRG registers instead of the standard 4. */ + +static unsigned long +insert_sprg (unsigned long insn, + long value, + int dialect, + const char **errmsg) +{ + /* This check uses PPC_OPCODE_403 because PPC405 is later defined + as a synonym. If ever a 405 specific dialect is added this + check should use that instead. */ + if (value > 7 + || (value > 3 + && (dialect & (PPC_OPCODE_BOOKE | PPC_OPCODE_403)) == 0)) + *errmsg = _("invalid sprg number"); + + /* If this is mfsprg4..7 then use spr 260..263 which can be read in + user mode. Anything else must use spr 272..279. */ + if (value <= 3 || (insn & 0x100) != 0) + value |= 0x10; + + return insn | ((value & 0x17) << 16); +} + +static long +extract_sprg (unsigned long insn, + int dialect, + int *invalid) +{ + unsigned long val = (insn >> 16) & 0x1f; + + /* mfsprg can use 260..263 and 272..279. mtsprg only uses spr 272..279 + If not BOOKE or 405, then both use only 272..275. */ + if (val <= 3 + || (val < 0x10 && (insn & 0x100) != 0) + || (val - 0x10 > 3 + && (dialect & (PPC_OPCODE_BOOKE | PPC_OPCODE_403)) == 0)) + *invalid = 1; + return val & 7; +} + /* The TBR field in an XFX instruction. This is just like SPR, but it is optional. When TBR is omitted, it must be inserted as 268 (the magic number of the TB register). These functions treat 0 @@ -1460,6 +1546,9 @@ extract_tbr (unsigned long insn, /* An A_MASK with the FRA and FRC fields fixed. */ #define AFRAFRC_MASK (A_MASK | FRA_MASK | FRC_MASK) +/* An AFRAFRC_MASK, but with L bit clear. */ +#define AFRALFRC_MASK (AFRAFRC_MASK & ~((unsigned long) 1 << 16)) + /* A B form instruction. */ #define B(op, aa, lk) (OP (op) | ((((unsigned long)(aa)) & 1) << 1) | ((lk) & 1)) #define B_MASK B (0x3f, 1, 1) @@ -1494,11 +1583,11 @@ extract_tbr (unsigned long insn, /* An Context form instruction. */ #define CTX(op, xop) (OP (op) | (((unsigned long)(xop)) & 0x7)) -#define CTX_MASK CTX(0x3f, 0x7) +#define CTX_MASK CTX(0x3f, 0x7) /* An User Context form instruction. */ #define UCTX(op, xop) (OP (op) | (((unsigned long)(xop)) & 0x1f)) -#define UCTX_MASK UCTX(0x3f, 0x1f) +#define UCTX_MASK UCTX(0x3f, 0x1f) /* The main opcode mask with the RA field clear. */ #define DRA_MASK (OP_MASK | RA_MASK) @@ -1570,12 +1659,21 @@ extract_tbr (unsigned long insn, /* An X form instruction. */ #define X(op, xop) (OP (op) | ((((unsigned long)(xop)) & 0x3ff) << 1)) +/* A Z form instruction. */ +#define Z(op, xop) (OP (op) | ((((unsigned long)(xop)) & 0x1ff) << 1)) + /* An X form instruction with the RC bit specified. */ #define XRC(op, xop, rc) (X ((op), (xop)) | ((rc) & 1)) +/* A Z form instruction with the RC bit specified. */ +#define ZRC(op, xop, rc) (Z ((op), (xop)) | ((rc) & 1)) + /* The mask for an X form instruction. */ #define X_MASK XRC (0x3f, 0x3ff, 1) +/* The mask for a Z form instruction. */ +#define Z_MASK ZRC (0x3f, 0x1ff, 1) + /* An X_MASK with the RA field fixed. */ #define XRA_MASK (X_MASK | RA_MASK) @@ -1585,6 +1683,9 @@ extract_tbr (unsigned long insn, /* An X_MASK with the RT field fixed. */ #define XRT_MASK (X_MASK | RT_MASK) +/* An XRT_MASK mask with the L bits clear. */ +#define XLRT_MASK (XRT_MASK & ~((unsigned long) 0x3 << 21)) + /* An X_MASK with the RA and RB fields fixed. */ #define XRARB_MASK (X_MASK | RA_MASK | RB_MASK) @@ -1597,8 +1698,8 @@ extract_tbr (unsigned long insn, /* An XRTRA_MASK, but with L bit clear. */ #define XRTLRA_MASK (XRTRA_MASK & ~((unsigned long) 1 << 21)) -/* An X form comparison instruction. */ -#define XCMPL(op, xop, l) (X ((op), (xop)) | ((((unsigned long)(l)) & 1) << 21)) +/* An X form instruction with the L bit specified. */ +#define XOPL(op, xop, l) (X ((op), (xop)) | ((((unsigned long)(l)) & 1) << 21)) /* The mask for an X form comparison instruction. */ #define XCMP_MASK (X_MASK | (((unsigned long)1) << 22)) @@ -1621,6 +1722,9 @@ extract_tbr (unsigned long insn, /* An X form sync instruction with everything filled in except the LS field. */ #define XSYNC_MASK (0xff9fffff) +/* An X_MASK, but with the EH bit clear. */ +#define XEH_MASK (X_MASK & ~((unsigned long )1)) + /* An X form AltiVec dss instruction. */ #define XDSS(op, xop, a) (X ((op), (xop)) | ((((unsigned long)(a)) & 1) << 25)) #define XDSS_MASK XDSS(0x3f, 0x3ff, 1) @@ -1663,6 +1767,9 @@ extract_tbr (unsigned long insn, #define XLYBB_MASK (XLYLK_MASK | BB_MASK) #define XLBOCBBB_MASK (XLOCB_MASK | BB_MASK) +/* A mask for branch instructions using the BH field. */ +#define XLBH_MASK (XL_MASK | (0x1c << 11)) + /* An XL_MASK with the BO and BB fields fixed. */ #define XLBOBB_MASK (XL_MASK | BO_MASK | BB_MASK) @@ -1682,11 +1789,12 @@ extract_tbr (unsigned long insn, #define XS_MASK XS (0x3f, 0x1ff, 1) /* A mask for the FXM version of an XFX form instruction. */ -#define XFXFXM_MASK (X_MASK | (1 << 11)) +#define XFXFXM_MASK (X_MASK | (1 << 11) | (1 << 20)) /* An XFX form instruction with the FXM field filled in. */ -#define XFXM(op, xop, fxm) \ - (X ((op), (xop)) | ((((unsigned long)(fxm)) & 0xff) << 12)) +#define XFXM(op, xop, fxm, p4) \ + (X ((op), (xop)) | ((((unsigned long)(fxm)) & 0xff) << 12) \ + | ((unsigned long)(p4) << 20)) /* An XFX form instruction with the SPR field filled in. */ #define XSPR(op, xop, spr) \ @@ -1699,7 +1807,7 @@ extract_tbr (unsigned long insn, /* An XFX form instruction with the SPR field filled in except for the SPRG field. */ -#define XSPRG_MASK (XSPR_MASK &~ SPRG_MASK) +#define XSPRG_MASK (XSPR_MASK & ~(0x17 << 16)) /* An X form instruction with everything filled in except the E field. */ #define XE_MASK (0xffff7fff) @@ -1769,6 +1877,9 @@ extract_tbr (unsigned long insn, #define PPCCOM PPC_OPCODE_PPC | PPC_OPCODE_COMMON #define NOPOWER4 PPC_OPCODE_NOPOWER4 | PPCCOM #define POWER4 PPC_OPCODE_POWER4 +#define POWER5 PPC_OPCODE_POWER5 +#define POWER6 PPC_OPCODE_POWER6 +#define CELL PPC_OPCODE_CELL #define PPC32 PPC_OPCODE_32 | PPC_OPCODE_PPC #define PPC64 PPC_OPCODE_64 | PPC_OPCODE_PPC #define PPC403 PPC_OPCODE_403 @@ -1776,7 +1887,7 @@ extract_tbr (unsigned long insn, #define PPC440 PPC_OPCODE_440 #define PPC750 PPC #define PPC860 PPC -#define PPCVEC PPC_OPCODE_ALTIVEC | PPC_OPCODE_PPC +#define PPCVEC PPC_OPCODE_ALTIVEC #define POWER PPC_OPCODE_POWER #define POWER2 PPC_OPCODE_POWER | PPC_OPCODE_POWER2 #define PPCPWR2 PPC_OPCODE_PPC | PPC_OPCODE_POWER | PPC_OPCODE_POWER2 @@ -1790,6 +1901,7 @@ extract_tbr (unsigned long insn, #define BOOKE PPC_OPCODE_BOOKE #define BOOKE64 PPC_OPCODE_BOOKE64 #define CLASSIC PPC_OPCODE_CLASSIC +#define PPCE300 PPC_OPCODE_E300 #define PPCSPE PPC_OPCODE_SPE #define PPCISEL PPC_OPCODE_ISEL #define PPCEFS PPC_OPCODE_EFS @@ -1952,6 +2064,41 @@ const struct powerpc_opcode powerpc_opcodes[] = { { "nmaclhwso.", XO(4,494,1,1), XO_MASK, PPC405|PPC440, { RT, RA, RB } }, { "mfvscr", VX(4, 1540), VX_MASK, PPCVEC, { VD } }, { "mtvscr", VX(4, 1604), VX_MASK, PPCVEC, { VB } }, + + /* Double-precision opcodes. */ + /* Some of these conflict with AltiVec, so move them before, since + PPCVEC includes the PPC_OPCODE_PPC set. */ +{ "efscfd", VX(4, 719), VX_MASK, PPCEFS, { RS, RB } }, +{ "efdabs", VX(4, 740), VX_MASK, PPCEFS, { RS, RA } }, +{ "efdnabs", VX(4, 741), VX_MASK, PPCEFS, { RS, RA } }, +{ "efdneg", VX(4, 742), VX_MASK, PPCEFS, { RS, RA } }, +{ "efdadd", VX(4, 736), VX_MASK, PPCEFS, { RS, RA, RB } }, +{ "efdsub", VX(4, 737), VX_MASK, PPCEFS, { RS, RA, RB } }, +{ "efdmul", VX(4, 744), VX_MASK, PPCEFS, { RS, RA, RB } }, +{ "efddiv", VX(4, 745), VX_MASK, PPCEFS, { RS, RA, RB } }, +{ "efdcmpgt", VX(4, 748), VX_MASK, PPCEFS, { CRFD, RA, RB } }, +{ "efdcmplt", VX(4, 749), VX_MASK, PPCEFS, { CRFD, RA, RB } }, +{ "efdcmpeq", VX(4, 750), VX_MASK, PPCEFS, { CRFD, RA, RB } }, +{ "efdtstgt", VX(4, 764), VX_MASK, PPCEFS, { CRFD, RA, RB } }, +{ "efdtstlt", VX(4, 765), VX_MASK, PPCEFS, { CRFD, RA, RB } }, +{ "efdtsteq", VX(4, 766), VX_MASK, PPCEFS, { CRFD, RA, RB } }, +{ "efdcfsi", VX(4, 753), VX_MASK, PPCEFS, { RS, RB } }, +{ "efdcfsid", VX(4, 739), VX_MASK, PPCEFS, { RS, RB } }, +{ "efdcfui", VX(4, 752), VX_MASK, PPCEFS, { RS, RB } }, +{ "efdcfuid", VX(4, 738), VX_MASK, PPCEFS, { RS, RB } }, +{ "efdcfsf", VX(4, 755), VX_MASK, PPCEFS, { RS, RB } }, +{ "efdcfuf", VX(4, 754), VX_MASK, PPCEFS, { RS, RB } }, +{ "efdctsi", VX(4, 757), VX_MASK, PPCEFS, { RS, RB } }, +{ "efdctsidz",VX(4, 747), VX_MASK, PPCEFS, { RS, RB } }, +{ "efdctsiz", VX(4, 762), VX_MASK, PPCEFS, { RS, RB } }, +{ "efdctui", VX(4, 756), VX_MASK, PPCEFS, { RS, RB } }, +{ "efdctuidz",VX(4, 746), VX_MASK, PPCEFS, { RS, RB } }, +{ "efdctuiz", VX(4, 760), VX_MASK, PPCEFS, { RS, RB } }, +{ "efdctsf", VX(4, 759), VX_MASK, PPCEFS, { RS, RB } }, +{ "efdctuf", VX(4, 758), VX_MASK, PPCEFS, { RS, RB } }, +{ "efdcfs", VX(4, 751), VX_MASK, PPCEFS, { RS, RB } }, + /* End of double-precision opcodes. */ + { "vaddcuw", VX(4, 384), VX_MASK, PPCVEC, { VD, VA, VB } }, { "vaddfp", VX(4, 10), VX_MASK, PPCVEC, { VD, VA, VB } }, { "vaddsbs", VX(4, 768), VX_MASK, PPCVEC, { VD, VA, VB } }, @@ -2389,16 +2536,16 @@ const struct powerpc_opcode powerpc_opcodes[] = { { "li", OP(14), DRA_MASK, PPCCOM, { RT, SI } }, { "lil", OP(14), DRA_MASK, PWRCOM, { RT, SI } }, -{ "addi", OP(14), OP_MASK, PPCCOM, { RT, RA, SI } }, -{ "cal", OP(14), OP_MASK, PWRCOM, { RT, D, RA } }, -{ "subi", OP(14), OP_MASK, PPCCOM, { RT, RA, NSI } }, -{ "la", OP(14), OP_MASK, PPCCOM, { RT, D, RA } }, +{ "addi", OP(14), OP_MASK, PPCCOM, { RT, RA0, SI } }, +{ "cal", OP(14), OP_MASK, PWRCOM, { RT, D, RA0 } }, +{ "subi", OP(14), OP_MASK, PPCCOM, { RT, RA0, NSI } }, +{ "la", OP(14), OP_MASK, PPCCOM, { RT, D, RA0 } }, { "lis", OP(15), DRA_MASK, PPCCOM, { RT, SISIGNOPT } }, { "liu", OP(15), DRA_MASK, PWRCOM, { RT, SISIGNOPT } }, -{ "addis", OP(15), OP_MASK, PPCCOM, { RT,RA,SISIGNOPT } }, -{ "cau", OP(15), OP_MASK, PWRCOM, { RT,RA,SISIGNOPT } }, -{ "subis", OP(15), OP_MASK, PPCCOM, { RT, RA, NSI } }, +{ "addis", OP(15), OP_MASK, PPCCOM, { RT,RA0,SISIGNOPT } }, +{ "cau", OP(15), OP_MASK, PWRCOM, { RT,RA0,SISIGNOPT } }, +{ "subis", OP(15), OP_MASK, PPCCOM, { RT, RA0, NSI } }, { "bdnz-", BBO(16,BODNZ,0,0), BBOATBI_MASK, PPCCOM, { BDM } }, { "bdnz+", BBO(16,BODNZ,0,0), BBOATBI_MASK, PPCCOM, { BDP } }, @@ -2665,9 +2812,9 @@ const struct powerpc_opcode powerpc_opcodes[] = { { "bcla+", B(16,1,1), B_MASK, PPCCOM, { BOE, BI, BDPA } }, { "bcla", B(16,1,1), B_MASK, COM, { BO, BI, BDA } }, -{ "sc", SC(17,1,0), 0xffffffff, PPC, { 0 } }, -{ "svc", SC(17,0,0), SC_MASK, POWER, { LEV, FL1, FL2 } }, -{ "svcl", SC(17,0,1), SC_MASK, POWER, { LEV, FL1, FL2 } }, +{ "sc", SC(17,1,0), SC_MASK, PPC, { LEV } }, +{ "svc", SC(17,0,0), SC_MASK, POWER, { SVC_LEV, FL1, FL2 } }, +{ "svcl", SC(17,0,1), SC_MASK, POWER, { SVC_LEV, FL1, FL2 } }, { "svca", SC(17,1,0), SC_MASK, PWRCOM, { SV } }, { "svcla", SC(17,1,1), SC_MASK, POWER, { SV } }, @@ -2890,12 +3037,12 @@ const struct powerpc_opcode powerpc_opcodes[] = { { "bdzflrl", XLO(19,BODZF,16,1), XLBOBB_MASK, PPCCOM, { BI } }, { "bdzflrl-",XLO(19,BODZF,16,1), XLBOBB_MASK, NOPOWER4, { BI } }, { "bdzflrl+",XLO(19,BODZFP,16,1), XLBOBB_MASK, NOPOWER4, { BI } }, -{ "bclr", XLLK(19,16,0), XLYBB_MASK, PPCCOM, { BO, BI } }, -{ "bclrl", XLLK(19,16,1), XLYBB_MASK, PPCCOM, { BO, BI } }, { "bclr+", XLYLK(19,16,1,0), XLYBB_MASK, PPCCOM, { BOE, BI } }, { "bclrl+", XLYLK(19,16,1,1), XLYBB_MASK, PPCCOM, { BOE, BI } }, { "bclr-", XLYLK(19,16,0,0), XLYBB_MASK, PPCCOM, { BOE, BI } }, { "bclrl-", XLYLK(19,16,0,1), XLYBB_MASK, PPCCOM, { BOE, BI } }, +{ "bclr", XLLK(19,16,0), XLBH_MASK, PPCCOM, { BO, BI, BH } }, +{ "bclrl", XLLK(19,16,1), XLBH_MASK, PPCCOM, { BO, BI, BH } }, { "bcr", XLLK(19,16,0), XLBB_MASK, PWRCOM, { BO, BI } }, { "bcrl", XLLK(19,16,1), XLBB_MASK, PWRCOM, { BO, BI } }, { "bclre", XLLK(19,17,0), XLBB_MASK, BOOKE64, { BO, BI } }, @@ -2924,14 +3071,23 @@ const struct powerpc_opcode powerpc_opcodes[] = { { "crand", XL(19,257), XL_MASK, COM, { BT, BA, BB } }, +{ "hrfid", XL(19,274), 0xffffffff, POWER5 | CELL, { 0 } }, + { "crset", XL(19,289), XL_MASK, PPCCOM, { BT, BAT, BBA } }, { "creqv", XL(19,289), XL_MASK, COM, { BT, BA, BB } }, +{ "doze", XL(19,402), 0xffffffff, POWER6, { 0 } }, + { "crorc", XL(19,417), XL_MASK, COM, { BT, BA, BB } }, +{ "nap", XL(19,434), 0xffffffff, POWER6, { 0 } }, + { "crmove", XL(19,449), XL_MASK, PPCCOM, { BT, BA, BBA } }, { "cror", XL(19,449), XL_MASK, COM, { BT, BA, BB } }, +{ "sleep", XL(19,466), 0xffffffff, POWER6, { 0 } }, +{ "rvwinkle", XL(19,498), 0xffffffff, POWER6, { 0 } }, + { "bctr", XLO(19,BOU,528,0), XLBOBIBB_MASK, COM, { 0 } }, { "bctrl", XLO(19,BOU,528,1), XLBOBIBB_MASK, COM, { 0 } }, { "bltctr", XLOCB(19,BOT,CBLT,528,0), XLBOCBBB_MASK, PPCCOM, { CR } }, @@ -3074,12 +3230,12 @@ const struct powerpc_opcode powerpc_opcodes[] = { { "bfctrl-", XLO(19,BOFM4,528,1), XLBOBB_MASK, POWER4, { BI } }, { "bfctrl+", XLO(19,BOFP,528,1), XLBOBB_MASK, NOPOWER4, { BI } }, { "bfctrl+", XLO(19,BOFP4,528,1), XLBOBB_MASK, POWER4, { BI } }, -{ "bcctr", XLLK(19,528,0), XLYBB_MASK, PPCCOM, { BO, BI } }, { "bcctr-", XLYLK(19,528,0,0), XLYBB_MASK, PPCCOM, { BOE, BI } }, { "bcctr+", XLYLK(19,528,1,0), XLYBB_MASK, PPCCOM, { BOE, BI } }, -{ "bcctrl", XLLK(19,528,1), XLYBB_MASK, PPCCOM, { BO, BI } }, { "bcctrl-", XLYLK(19,528,0,1), XLYBB_MASK, PPCCOM, { BOE, BI } }, { "bcctrl+", XLYLK(19,528,1,1), XLYBB_MASK, PPCCOM, { BOE, BI } }, +{ "bcctr", XLLK(19,528,0), XLBH_MASK, PPCCOM, { BO, BI, BH } }, +{ "bcctrl", XLLK(19,528,1), XLBH_MASK, PPCCOM, { BO, BI, BH } }, { "bcc", XLLK(19,528,0), XLBB_MASK, PWRCOM, { BO, BI } }, { "bccl", XLLK(19,528,1), XLBB_MASK, PWRCOM, { BO, BI } }, { "bcctre", XLLK(19,529,0), XLYBB_MASK, BOOKE64, { BO, BI } }, @@ -3158,8 +3314,8 @@ const struct powerpc_opcode powerpc_opcodes[] = { { "rldcr", MDS(30,9,0), MDS_MASK, PPC64, { RA, RS, RB, ME6 } }, { "rldcr.", MDS(30,9,1), MDS_MASK, PPC64, { RA, RS, RB, ME6 } }, -{ "cmpw", XCMPL(31,0,0), XCMPL_MASK, PPCCOM, { OBF, RA, RB } }, -{ "cmpd", XCMPL(31,0,1), XCMPL_MASK, PPC64, { OBF, RA, RB } }, +{ "cmpw", XOPL(31,0,0), XCMPL_MASK, PPCCOM, { OBF, RA, RB } }, +{ "cmpd", XOPL(31,0,1), XCMPL_MASK, PPC64, { OBF, RA, RB } }, { "cmp", X(31,0), XCMP_MASK, PPC, { BF, L, RA, RB } }, { "cmp", X(31,0), XCMPL_MASK, PWRCOM, { BF, RA, RB } }, @@ -3228,17 +3384,18 @@ const struct powerpc_opcode powerpc_opcodes[] = { { "iseleq", X(31,79), X_MASK, PPCISEL, { RT, RA, RB } }, { "isel", XISEL(31,15), XISEL_MASK, PPCISEL, { RT, RA, RB, CRB } }, -{ "mfcr", X(31,19), XRARB_MASK, NOPOWER4, { RT } }, +{ "mfocrf", XFXM(31,19,0,1), XFXFXM_MASK, COM, { RT, FXM } }, +{ "mfcr", X(31,19), XRARB_MASK, NOPOWER4 | COM, { RT } }, { "mfcr", X(31,19), XFXFXM_MASK, POWER4, { RT, FXM4 } }, -{ "lwarx", X(31,20), X_MASK, PPC, { RT, RA, RB } }, +{ "lwarx", X(31,20), XEH_MASK, PPC, { RT, RA0, RB, EH } }, -{ "ldx", X(31,21), X_MASK, PPC64, { RT, RA, RB } }, +{ "ldx", X(31,21), X_MASK, PPC64, { RT, RA0, RB } }, -{ "icbt", X(31,22), X_MASK, BOOKE, { CT, RA, RB } }, +{ "icbt", X(31,22), X_MASK, BOOKE|PPCE300, { CT, RA, RB } }, { "icbt", X(31,262), XRT_MASK, PPC403, { RA, RB } }, -{ "lwzx", X(31,23), X_MASK, PPCCOM, { RT, RA, RB } }, +{ "lwzx", X(31,23), X_MASK, PPCCOM, { RT, RA0, RB } }, { "lx", X(31,23), X_MASK, PWRCOM, { RT, RA, RB } }, { "slw", XRC(31,24,0), X_MASK, PPCCOM, { RA, RS, RB } }, @@ -3262,10 +3419,10 @@ const struct powerpc_opcode powerpc_opcodes[] = { { "icbte", X(31,30), X_MASK, BOOKE64, { CT, RA, RB } }, -{ "lwzxe", X(31,31), X_MASK, BOOKE64, { RT, RA, RB } }, +{ "lwzxe", X(31,31), X_MASK, BOOKE64, { RT, RA0, RB } }, -{ "cmplw", XCMPL(31,32,0), XCMPL_MASK, PPCCOM, { OBF, RA, RB } }, -{ "cmpld", XCMPL(31,32,1), XCMPL_MASK, PPC64, { OBF, RA, RB } }, +{ "cmplw", XOPL(31,32,0), XCMPL_MASK, PPCCOM, { OBF, RA, RB } }, +{ "cmpld", XOPL(31,32,1), XCMPL_MASK, PPC64, { OBF, RA, RB } }, { "cmpl", X(31,32), XCMP_MASK, PPC, { BF, L, RA, RB } }, { "cmpl", X(31,32), XCMPL_MASK, PWRCOM, { BF, RA, RB } }, @@ -3324,15 +3481,16 @@ const struct powerpc_opcode powerpc_opcodes[] = { { "mfmsr", X(31,83), XRARB_MASK, COM, { RT } }, -{ "ldarx", X(31,84), X_MASK, PPC64, { RT, RA, RB } }, +{ "ldarx", X(31,84), XEH_MASK, PPC64, { RT, RA0, RB, EH } }, -{ "dcbf", X(31,86), XRT_MASK, PPC, { RA, RB } }, +{ "dcbfl", XOPL(31,86,1), XRT_MASK, POWER5, { RA, RB } }, +{ "dcbf", X(31,86), XLRT_MASK, PPC, { RA, RB, XRT_L } }, -{ "lbzx", X(31,87), X_MASK, COM, { RT, RA, RB } }, +{ "lbzx", X(31,87), X_MASK, COM, { RT, RA0, RB } }, { "dcbfe", X(31,94), XRT_MASK, BOOKE64, { RA, RB } }, -{ "lbzxe", X(31,95), X_MASK, BOOKE64, { RT, RA, RB } }, +{ "lbzxe", X(31,95), X_MASK, BOOKE64, { RT, RA0, RB } }, { "neg", XO(31,104,0,0), XORB_MASK, COM, { RT, RA } }, { "neg.", XO(31,104,0,1), XORB_MASK, COM, { RT, RA } }, @@ -3350,12 +3508,14 @@ const struct powerpc_opcode powerpc_opcodes[] = { { "lbzux", X(31,119), X_MASK, COM, { RT, RAL, RB } }, +{ "popcntb", X(31,122), XRB_MASK, POWER5, { RA, RS } }, + { "not", XRC(31,124,0), X_MASK, COM, { RA, RS, RBS } }, { "nor", XRC(31,124,0), X_MASK, COM, { RA, RS, RB } }, { "not.", XRC(31,124,1), X_MASK, COM, { RA, RS, RBS } }, { "nor.", XRC(31,124,1), X_MASK, COM, { RA, RS, RB } }, -{ "lwarxe", X(31,126), X_MASK, BOOKE64, { RT, RA, RB } }, +{ "lwarxe", X(31,126), X_MASK, BOOKE64, { RT, RA0, RB } }, { "lbzuxe", X(31,127), X_MASK, BOOKE64, { RT, RAL, RB } }, @@ -3383,21 +3543,22 @@ const struct powerpc_opcode powerpc_opcodes[] = { { "dcbtstlse",X(31,142),X_MASK, PPCCHLK64, { CT, RA, RB }}, -{ "mtcr", XFXM(31,144,0xff), XRARB_MASK, COM, { RS }}, +{ "mtocrf", XFXM(31,144,0,1), XFXFXM_MASK, COM, { FXM, RS } }, +{ "mtcr", XFXM(31,144,0xff,0), XRARB_MASK, COM, { RS }}, { "mtcrf", X(31,144), XFXFXM_MASK, COM, { FXM, RS } }, { "mtmsr", X(31,146), XRARB_MASK, COM, { RS } }, -{ "stdx", X(31,149), X_MASK, PPC64, { RS, RA, RB } }, +{ "stdx", X(31,149), X_MASK, PPC64, { RS, RA0, RB } }, -{ "stwcx.", XRC(31,150,1), X_MASK, PPC, { RS, RA, RB } }, +{ "stwcx.", XRC(31,150,1), X_MASK, PPC, { RS, RA0, RB } }, -{ "stwx", X(31,151), X_MASK, PPCCOM, { RS, RA, RB } }, +{ "stwx", X(31,151), X_MASK, PPCCOM, { RS, RA0, RB } }, { "stx", X(31,151), X_MASK, PWRCOM, { RS, RA, RB } }, -{ "stwcxe.", XRC(31,158,1), X_MASK, BOOKE64, { RS, RA, RB } }, +{ "stwcxe.", XRC(31,158,1), X_MASK, BOOKE64, { RS, RA0, RB } }, -{ "stwxe", X(31,159), X_MASK, BOOKE64, { RS, RA, RB } }, +{ "stwxe", X(31,159), X_MASK, BOOKE64, { RS, RA0, RB } }, { "slq", XRC(31,152,0), X_MASK, M601, { RA, RS, RB } }, { "slq.", XRC(31,152,1), X_MASK, M601, { RA, RS, RB } }, @@ -3405,6 +3566,8 @@ const struct powerpc_opcode powerpc_opcodes[] = { { "sle", XRC(31,153,0), X_MASK, M601, { RA, RS, RB } }, { "sle.", XRC(31,153,1), X_MASK, M601, { RA, RS, RB } }, +{ "prtyw", X(31,154), XRB_MASK, POWER6, { RA, RS } }, + { "wrteei", X(31,163), XE_MASK, PPC403 | BOOKE, { E } }, { "dcbtls", X(31,166), X_MASK, PPCCHLK, { CT, RA, RB }}, @@ -3415,11 +3578,13 @@ const struct powerpc_opcode powerpc_opcodes[] = { { "stdux", X(31,181), X_MASK, PPC64, { RS, RAS, RB } }, { "stwux", X(31,183), X_MASK, PPCCOM, { RS, RAS, RB } }, -{ "stux", X(31,183), X_MASK, PWRCOM, { RS, RA, RB } }, +{ "stux", X(31,183), X_MASK, PWRCOM, { RS, RA0, RB } }, { "sliq", XRC(31,184,0), X_MASK, M601, { RA, RS, SH } }, { "sliq.", XRC(31,184,1), X_MASK, M601, { RA, RS, SH } }, +{ "prtyd", X(31,186), XRB_MASK, POWER6, { RA, RS } }, + { "stwuxe", X(31,191), X_MASK, BOOKE64, { RS, RAS, RB } }, { "subfze", XO(31,200,0,0), XORB_MASK, PPCCOM, { RT, RA } }, @@ -3442,9 +3607,9 @@ const struct powerpc_opcode powerpc_opcodes[] = { { "mtsr", X(31,210), XRB_MASK|(1<<20), COM32, { SR, RS } }, -{ "stdcx.", XRC(31,214,1), X_MASK, PPC64, { RS, RA, RB } }, +{ "stdcx.", XRC(31,214,1), X_MASK, PPC64, { RS, RA0, RB } }, -{ "stbx", X(31,215), X_MASK, COM, { RS, RA, RB } }, +{ "stbx", X(31,215), X_MASK, COM, { RS, RA0, RB } }, { "sllq", XRC(31,216,0), X_MASK, M601, { RA, RS, RB } }, { "sllq.", XRC(31,216,1), X_MASK, M601, { RA, RS, RB } }, @@ -3452,7 +3617,7 @@ const struct powerpc_opcode powerpc_opcodes[] = { { "sleq", XRC(31,217,0), X_MASK, M601, { RA, RS, RB } }, { "sleq.", XRC(31,217,1), X_MASK, M601, { RA, RS, RB } }, -{ "stbxe", X(31,223), X_MASK, BOOKE64, { RS, RA, RB } }, +{ "stbxe", X(31,223), X_MASK, BOOKE64, { RS, RA0, RB } }, { "icblc", X(31,230), X_MASK, PPCCHLK, { CT, RA, RB }}, @@ -3492,7 +3657,7 @@ const struct powerpc_opcode powerpc_opcodes[] = { { "mtsrin", X(31,242), XRA_MASK, PPC32, { RS, RB } }, { "mtsri", X(31,242), XRA_MASK, POWER32, { RS, RB } }, -{ "dcbtst", X(31,246), XRT_MASK, PPC, { CT, RA, RB } }, +{ "dcbtst", X(31,246), X_MASK, PPC, { CT, RA, RB } }, { "stbux", X(31,247), X_MASK, COM, { RS, RAS, RB } }, @@ -3519,26 +3684,26 @@ const struct powerpc_opcode powerpc_opcodes[] = { { "addo.", XO(31,266,1,1), XO_MASK, PPCCOM, { RT, RA, RB } }, { "caxo.", XO(31,266,1,1), XO_MASK, PWRCOM, { RT, RA, RB } }, -{ "tlbiel", X(31,274), XRTRA_MASK, POWER4, { RB } }, +{ "tlbiel", X(31,274), XRTLRA_MASK, POWER4, { RB, L } }, { "mfapidi", X(31,275), X_MASK, BOOKE, { RT, RA } }, { "lscbx", XRC(31,277,0), X_MASK, M601, { RT, RA, RB } }, { "lscbx.", XRC(31,277,1), X_MASK, M601, { RT, RA, RB } }, -{ "dcbt", X(31,278), XRT_MASK, PPC, { CT, RA, RB } }, +{ "dcbt", X(31,278), X_MASK, PPC, { CT, RA, RB } }, -{ "lhzx", X(31,279), X_MASK, COM, { RT, RA, RB } }, +{ "lhzx", X(31,279), X_MASK, COM, { RT, RA0, RB } }, { "eqv", XRC(31,284,0), X_MASK, COM, { RA, RS, RB } }, { "eqv.", XRC(31,284,1), X_MASK, COM, { RA, RS, RB } }, { "dcbte", X(31,286), X_MASK, BOOKE64, { CT, RA, RB } }, -{ "lhzxe", X(31,287), X_MASK, BOOKE64, { RT, RA, RB } }, +{ "lhzxe", X(31,287), X_MASK, BOOKE64, { RT, RA0, RB } }, { "tlbie", X(31,306), XRTLRA_MASK, PPC, { RB, L } }, -{ "tlbi", X(31,306), XRT_MASK, POWER, { RA, RB } }, +{ "tlbi", X(31,306), XRT_MASK, POWER, { RA0, RB } }, { "eciwx", X(31,310), X_MASK, PPC, { RT, RA, RB } }, @@ -3607,6 +3772,7 @@ const struct powerpc_opcode powerpc_opcodes[] = { { "mfsdr1", XSPR(31,339,25), XSPR_MASK, COM, { RT } }, { "mfsrr0", XSPR(31,339,26), XSPR_MASK, COM, { RT } }, { "mfsrr1", XSPR(31,339,27), XSPR_MASK, COM, { RT } }, +{ "mfcfar", XSPR(31,339,28), XSPR_MASK, POWER6, { RT } }, { "mfpid", XSPR(31,339,48), XSPR_MASK, BOOKE, { RT } }, { "mfpid", XSPR(31,339,945), XSPR_MASK, PPC403, { RT } }, { "mfcsrr0", XSPR(31,339,58), XSPR_MASK, BOOKE, { RT } }, @@ -3634,21 +3800,21 @@ const struct powerpc_opcode powerpc_opcodes[] = { { "mfbar", XSPR(31,339,159), XSPR_MASK, PPC860, { RT } }, { "mfvrsave", XSPR(31,339,256), XSPR_MASK, PPCVEC, { RT } }, { "mfusprg0", XSPR(31,339,256), XSPR_MASK, BOOKE, { RT } }, -{ "mfsprg4", XSPR(31,339,260), XSPR_MASK, PPC405, { RT } }, -{ "mfsprg5", XSPR(31,339,261), XSPR_MASK, PPC405, { RT } }, -{ "mfsprg6", XSPR(31,339,262), XSPR_MASK, PPC405, { RT } }, -{ "mfsprg7", XSPR(31,339,263), XSPR_MASK, PPC405, { RT } }, { "mftb", X(31,371), X_MASK, CLASSIC, { RT, TBR } }, { "mftb", XSPR(31,339,268), XSPR_MASK, BOOKE, { RT } }, { "mftbl", XSPR(31,371,268), XSPR_MASK, CLASSIC, { RT } }, { "mftbl", XSPR(31,339,268), XSPR_MASK, BOOKE, { RT } }, { "mftbu", XSPR(31,371,269), XSPR_MASK, CLASSIC, { RT } }, { "mftbu", XSPR(31,339,269), XSPR_MASK, BOOKE, { RT } }, -{ "mfsprg", XSPR(31,339,272), XSPRG_MASK, PPC, { RT, SPRG } }, +{ "mfsprg", XSPR(31,339,256), XSPRG_MASK, PPC, { RT, SPRG } }, { "mfsprg0", XSPR(31,339,272), XSPR_MASK, PPC, { RT } }, { "mfsprg1", XSPR(31,339,273), XSPR_MASK, PPC, { RT } }, { "mfsprg2", XSPR(31,339,274), XSPR_MASK, PPC, { RT } }, { "mfsprg3", XSPR(31,339,275), XSPR_MASK, PPC, { RT } }, +{ "mfsprg4", XSPR(31,339,260), XSPR_MASK, PPC405 | BOOKE, { RT } }, +{ "mfsprg5", XSPR(31,339,261), XSPR_MASK, PPC405 | BOOKE, { RT } }, +{ "mfsprg6", XSPR(31,339,262), XSPR_MASK, PPC405 | BOOKE, { RT } }, +{ "mfsprg7", XSPR(31,339,263), XSPR_MASK, PPC405 | BOOKE, { RT } }, { "mfasr", XSPR(31,339,280), XSPR_MASK, PPC64, { RT } }, { "mfear", XSPR(31,339,282), XSPR_MASK, PPC, { RT } }, { "mfpir", XSPR(31,339,286), XSPR_MASK, BOOKE, { RT } }, @@ -3699,6 +3865,10 @@ const struct powerpc_opcode powerpc_opcodes[] = { { "mfspefscr", XSPR(31,339,512), XSPR_MASK, PPCSPE, { RT } }, { "mfbbear", XSPR(31,339,513), XSPR_MASK, PPCBRLK, { RT } }, { "mfbbtar", XSPR(31,339,514), XSPR_MASK, PPCBRLK, { RT } }, +{ "mfivor32", XSPR(31,339,528), XSPR_MASK, PPCSPE, { RT } }, +{ "mfivor33", XSPR(31,339,529), XSPR_MASK, PPCSPE, { RT } }, +{ "mfivor34", XSPR(31,339,530), XSPR_MASK, PPCSPE, { RT } }, +{ "mfivor35", XSPR(31,339,531), XSPR_MASK, PPCPMR, { RT } }, { "mfibatu", XSPR(31,339,528), XSPRBAT_MASK, PPC, { RT, SPRBAT } }, { "mfibatl", XSPR(31,339,529), XSPRBAT_MASK, PPC, { RT, SPRBAT } }, { "mfdbatu", XSPR(31,339,536), XSPRBAT_MASK, PPC, { RT, SPRBAT } }, @@ -3708,10 +3878,11 @@ const struct powerpc_opcode powerpc_opcodes[] = { { "mfic_dat", XSPR(31,339,562), XSPR_MASK, PPC860, { RT } }, { "mfdc_cst", XSPR(31,339,568), XSPR_MASK, PPC860, { RT } }, { "mfdc_adr", XSPR(31,339,569), XSPR_MASK, PPC860, { RT } }, -{ "mfdc_dat", XSPR(31,339,570), XSPR_MASK, PPC860, { RT } }, { "mfmcsrr0", XSPR(31,339,570), XSPR_MASK, PPCRFMCI, { RT } }, +{ "mfdc_dat", XSPR(31,339,570), XSPR_MASK, PPC860, { RT } }, { "mfmcsrr1", XSPR(31,339,571), XSPR_MASK, PPCRFMCI, { RT } }, { "mfmcsr", XSPR(31,339,572), XSPR_MASK, PPCRFMCI, { RT } }, +{ "mfmcar", XSPR(31,339,573), XSPR_MASK, PPCRFMCI, { RT } }, { "mfdpdr", XSPR(31,339,630), XSPR_MASK, PPC860, { RT } }, { "mfdpir", XSPR(31,339,631), XSPR_MASK, PPC860, { RT } }, { "mfimmr", XSPR(31,339,638), XSPR_MASK, PPC860, { RT } }, @@ -3775,14 +3946,14 @@ const struct powerpc_opcode powerpc_opcodes[] = { { "mfpbu2", XSPR(31,339,1023), XSPR_MASK, PPC403, { RT } }, { "mfspr", X(31,339), X_MASK, COM, { RT, SPR } }, -{ "lwax", X(31,341), X_MASK, PPC64, { RT, RA, RB } }, +{ "lwax", X(31,341), X_MASK, PPC64, { RT, RA0, RB } }, { "dst", XDSS(31,342,0), XDSS_MASK, PPCVEC, { RA, RB, STRM } }, { "dstt", XDSS(31,342,1), XDSS_MASK, PPCVEC, { RA, RB, STRM } }, -{ "lhax", X(31,343), X_MASK, COM, { RT, RA, RB } }, +{ "lhax", X(31,343), X_MASK, COM, { RT, RA0, RB } }, -{ "lhaxe", X(31,351), X_MASK, BOOKE64, { RT, RA, RB } }, +{ "lhaxe", X(31,351), X_MASK, BOOKE64, { RT, RA0, RB } }, { "dstst", XDSS(31,374,0), XDSS_MASK, PPCVEC, { RA, RB, STRM } }, { "dststt", XDSS(31,374,1), XDSS_MASK, PPCVEC, { RA, RB, STRM } }, @@ -3821,14 +3992,20 @@ const struct powerpc_opcode powerpc_opcodes[] = { { "slbmte", X(31,402), XRA_MASK, PPC64, { RS, RB } }, -{ "sthx", X(31,407), X_MASK, COM, { RS, RA, RB } }, +{ "sthx", X(31,407), X_MASK, COM, { RS, RA0, RB } }, + +{ "cmpb", X(31,508), X_MASK, POWER6, { RA, RS, RB } }, { "lfqx", X(31,791), X_MASK, POWER2, { FRT, RA, RB } }, +{ "lfdpx", X(31,791), X_MASK, POWER6, { FRT, RA, RB } }, + { "lfqux", X(31,823), X_MASK, POWER2, { FRT, RA, RB } }, { "stfqx", X(31,919), X_MASK, POWER2, { FRS, RA, RB } }, +{ "stfdpx", X(31,919), X_MASK, POWER6, { FRS, RA, RB } }, + { "stfqux", X(31,951), X_MASK, POWER2, { FRS, RA, RB } }, { "orc", XRC(31,412,0), X_MASK, COM, { RA, RS, RB } }, @@ -3837,7 +4014,7 @@ const struct powerpc_opcode powerpc_opcodes[] = { { "sradi", XS(31,413,0), XS_MASK, PPC64, { RA, RS, SH6 } }, { "sradi.", XS(31,413,1), XS_MASK, PPC64, { RA, RS, SH6 } }, -{ "sthxe", X(31,415), X_MASK, BOOKE64, { RS, RA, RB } }, +{ "sthxe", X(31,415), X_MASK, BOOKE64, { RS, RA0, RB } }, { "slbie", X(31,434), XRTRA_MASK, PPC64, { RB } }, @@ -3918,6 +4095,7 @@ const struct powerpc_opcode powerpc_opcodes[] = { { "mtsdr1", XSPR(31,467,25), XSPR_MASK, COM, { RS } }, { "mtsrr0", XSPR(31,467,26), XSPR_MASK, COM, { RS } }, { "mtsrr1", XSPR(31,467,27), XSPR_MASK, COM, { RS } }, +{ "mtcfar", XSPR(31,467,28), XSPR_MASK, POWER6, { RS } }, { "mtpid", XSPR(31,467,48), XSPR_MASK, BOOKE, { RS } }, { "mtpid", XSPR(31,467,945), XSPR_MASK, PPC403, { RS } }, { "mtdecar", XSPR(31,467,54), XSPR_MASK, BOOKE, { RS } }, @@ -3946,7 +4124,7 @@ const struct powerpc_opcode powerpc_opcodes[] = { { "mtbar", XSPR(31,467,159), XSPR_MASK, PPC860, { RS } }, { "mtvrsave", XSPR(31,467,256), XSPR_MASK, PPCVEC, { RS } }, { "mtusprg0", XSPR(31,467,256), XSPR_MASK, BOOKE, { RS } }, -{ "mtsprg", XSPR(31,467,272), XSPRG_MASK,PPC, { SPRG, RS } }, +{ "mtsprg", XSPR(31,467,256), XSPRG_MASK,PPC, { SPRG, RS } }, { "mtsprg0", XSPR(31,467,272), XSPR_MASK, PPC, { RS } }, { "mtsprg1", XSPR(31,467,273), XSPR_MASK, PPC, { RS } }, { "mtsprg2", XSPR(31,467,274), XSPR_MASK, PPC, { RS } }, @@ -4005,6 +4183,10 @@ const struct powerpc_opcode powerpc_opcodes[] = { { "mtspefscr", XSPR(31,467,512), XSPR_MASK, PPCSPE, { RS } }, { "mtbbear", XSPR(31,467,513), XSPR_MASK, PPCBRLK, { RS } }, { "mtbbtar", XSPR(31,467,514), XSPR_MASK, PPCBRLK, { RS } }, +{ "mtivor32", XSPR(31,467,528), XSPR_MASK, PPCSPE, { RS } }, +{ "mtivor33", XSPR(31,467,529), XSPR_MASK, PPCSPE, { RS } }, +{ "mtivor34", XSPR(31,467,530), XSPR_MASK, PPCSPE, { RS } }, +{ "mtivor35", XSPR(31,467,531), XSPR_MASK, PPCPMR, { RS } }, { "mtibatu", XSPR(31,467,528), XSPRBAT_MASK, PPC, { SPRBAT, RS } }, { "mtibatl", XSPR(31,467,529), XSPRBAT_MASK, PPC, { SPRBAT, RS } }, { "mtdbatu", XSPR(31,467,536), XSPRBAT_MASK, PPC, { SPRBAT, RS } }, @@ -4101,13 +4283,15 @@ const struct powerpc_opcode powerpc_opcodes[] = { { "clcs", X(31,531), XRB_MASK, M601, { RT, RA } }, -{ "lswx", X(31,533), X_MASK, PPCCOM, { RT, RA, RB } }, +{ "ldbrx", X(31,532), X_MASK, CELL, { RT, RA0, RB } }, + +{ "lswx", X(31,533), X_MASK, PPCCOM, { RT, RA0, RB } }, { "lsx", X(31,533), X_MASK, PWRCOM, { RT, RA, RB } }, -{ "lwbrx", X(31,534), X_MASK, PPCCOM, { RT, RA, RB } }, +{ "lwbrx", X(31,534), X_MASK, PPCCOM, { RT, RA0, RB } }, { "lbrx", X(31,534), X_MASK, PWRCOM, { RT, RA, RB } }, -{ "lfsx", X(31,535), X_MASK, COM, { FRT, RA, RB } }, +{ "lfsx", X(31,535), X_MASK, COM, { FRT, RA0, RB } }, { "srw", XRC(31,536,0), X_MASK, PPCCOM, { RA, RS, RB } }, { "sr", XRC(31,536,0), X_MASK, PWRCOM, { RA, RS, RB } }, @@ -4123,11 +4307,12 @@ const struct powerpc_opcode powerpc_opcodes[] = { { "maskir", XRC(31,541,0), X_MASK, M601, { RA, RS, RB } }, { "maskir.", XRC(31,541,1), X_MASK, M601, { RA, RS, RB } }, -{ "lwbrxe", X(31,542), X_MASK, BOOKE64, { RT, RA, RB } }, +{ "lwbrxe", X(31,542), X_MASK, BOOKE64, { RT, RA0, RB } }, -{ "lfsxe", X(31,543), X_MASK, BOOKE64, { FRT, RA, RB } }, +{ "lfsxe", X(31,543), X_MASK, BOOKE64, { FRT, RA0, RB } }, { "bbelr", X(31,550), X_MASK, PPCBRLK, { 0 }}, + { "tlbsync", X(31,566), 0xffffffff, PPC, { 0 } }, { "lfsux", X(31,567), X_MASK, COM, { FRT, RAS, RB } }, @@ -4136,8 +4321,8 @@ const struct powerpc_opcode powerpc_opcodes[] = { { "mfsr", X(31,595), XRB_MASK|(1<<20), COM32, { RT, SR } }, -{ "lswi", X(31,597), X_MASK, PPCCOM, { RT, RA, NB } }, -{ "lsi", X(31,597), X_MASK, PWRCOM, { RT, RA, NB } }, +{ "lswi", X(31,597), X_MASK, PPCCOM, { RT, RA0, NB } }, +{ "lsi", X(31,597), X_MASK, PWRCOM, { RT, RA0, NB } }, { "lwsync", XSYNC(31,598,1), 0xffffffff, PPC, { 0 } }, { "ptesync", XSYNC(31,598,2), 0xffffffff, PPC64, { 0 } }, @@ -4145,9 +4330,11 @@ const struct powerpc_opcode powerpc_opcodes[] = { { "sync", X(31,598), XSYNC_MASK, PPCCOM, { LS } }, { "dcs", X(31,598), 0xffffffff, PWRCOM, { 0 } }, -{ "lfdx", X(31,599), X_MASK, COM, { FRT, RA, RB } }, +{ "lfdx", X(31,599), X_MASK, COM, { FRT, RA0, RB } }, + +{ "lfdxe", X(31,607), X_MASK, BOOKE64, { FRT, RA0, RB } }, -{ "lfdxe", X(31,607), X_MASK, BOOKE64, { FRT, RA, RB } }, +{ "mffgpr", XRC(31,607,0), XRA_MASK, POWER6, { FRT, RB } }, { "mfsri", X(31,627), X_MASK, PWRCOM, { RT, RA, RB } }, @@ -4159,13 +4346,15 @@ const struct powerpc_opcode powerpc_opcodes[] = { { "mfsrin", X(31,659), XRA_MASK, PPC32, { RT, RB } }, -{ "stswx", X(31,661), X_MASK, PPCCOM, { RS, RA, RB } }, -{ "stsx", X(31,661), X_MASK, PWRCOM, { RS, RA, RB } }, +{ "stdbrx", X(31,660), X_MASK, CELL, { RS, RA0, RB } }, + +{ "stswx", X(31,661), X_MASK, PPCCOM, { RS, RA0, RB } }, +{ "stsx", X(31,661), X_MASK, PWRCOM, { RS, RA0, RB } }, -{ "stwbrx", X(31,662), X_MASK, PPCCOM, { RS, RA, RB } }, -{ "stbrx", X(31,662), X_MASK, PWRCOM, { RS, RA, RB } }, +{ "stwbrx", X(31,662), X_MASK, PPCCOM, { RS, RA0, RB } }, +{ "stbrx", X(31,662), X_MASK, PWRCOM, { RS, RA0, RB } }, -{ "stfsx", X(31,663), X_MASK, COM, { FRS, RA, RB } }, +{ "stfsx", X(31,663), X_MASK, COM, { FRS, RA0, RB } }, { "srq", XRC(31,664,0), X_MASK, M601, { RA, RS, RB } }, { "srq.", XRC(31,664,1), X_MASK, M601, { RA, RS, RB } }, @@ -4173,9 +4362,9 @@ const struct powerpc_opcode powerpc_opcodes[] = { { "sre", XRC(31,665,0), X_MASK, M601, { RA, RS, RB } }, { "sre.", XRC(31,665,1), X_MASK, M601, { RA, RS, RB } }, -{ "stwbrxe", X(31,670), X_MASK, BOOKE64, { RS, RA, RB } }, +{ "stwbrxe", X(31,670), X_MASK, BOOKE64, { RS, RA0, RB } }, -{ "stfsxe", X(31,671), X_MASK, BOOKE64, { FRS, RA, RB } }, +{ "stfsxe", X(31,671), X_MASK, BOOKE64, { FRS, RA0, RB } }, { "stfsux", X(31,695), X_MASK, COM, { FRS, RAS, RB } }, @@ -4184,10 +4373,10 @@ const struct powerpc_opcode powerpc_opcodes[] = { { "stfsuxe", X(31,703), X_MASK, BOOKE64, { FRS, RAS, RB } }, -{ "stswi", X(31,725), X_MASK, PPCCOM, { RS, RA, NB } }, -{ "stsi", X(31,725), X_MASK, PWRCOM, { RS, RA, NB } }, +{ "stswi", X(31,725), X_MASK, PPCCOM, { RS, RA0, NB } }, +{ "stsi", X(31,725), X_MASK, PWRCOM, { RS, RA0, NB } }, -{ "stfdx", X(31,727), X_MASK, COM, { FRS, RA, RB } }, +{ "stfdx", X(31,727), X_MASK, COM, { FRS, RA0, RB } }, { "srlq", XRC(31,728,0), X_MASK, M601, { RA, RS, RB } }, { "srlq.", XRC(31,728,1), X_MASK, M601, { RA, RS, RB } }, @@ -4195,7 +4384,9 @@ const struct powerpc_opcode powerpc_opcodes[] = { { "sreq", XRC(31,729,0), X_MASK, M601, { RA, RS, RB } }, { "sreq.", XRC(31,729,1), X_MASK, M601, { RA, RS, RB } }, -{ "stfdxe", X(31,735), X_MASK, BOOKE64, { FRS, RA, RB } }, +{ "stfdxe", X(31,735), X_MASK, BOOKE64, { FRS, RA0, RB } }, + +{ "mftgpr", XRC(31,735,0), XRA_MASK, POWER6, { RT, FRB } }, { "dcba", X(31,758), XRT_MASK, PPC405 | BOOKE, { RA, RB } }, @@ -4211,7 +4402,9 @@ const struct powerpc_opcode powerpc_opcodes[] = { { "tlbivax", X(31,786), XRT_MASK, BOOKE, { RA, RB } }, { "tlbivaxe",X(31,787), XRT_MASK, BOOKE64, { RA, RB } }, -{ "lhbrx", X(31,790), X_MASK, COM, { RT, RA, RB } }, +{ "lwzcix", X(31,789), X_MASK, POWER6, { RT, RA0, RB } }, + +{ "lhbrx", X(31,790), X_MASK, COM, { RT, RA0, RB } }, { "sraw", XRC(31,792,0), X_MASK, PPCCOM, { RA, RS, RB } }, { "sra", XRC(31,792,0), X_MASK, PWRCOM, { RA, RS, RB } }, @@ -4221,13 +4414,15 @@ const struct powerpc_opcode powerpc_opcodes[] = { { "srad", XRC(31,794,0), X_MASK, PPC64, { RA, RS, RB } }, { "srad.", XRC(31,794,1), X_MASK, PPC64, { RA, RS, RB } }, -{ "lhbrxe", X(31,798), X_MASK, BOOKE64, { RT, RA, RB } }, +{ "lhbrxe", X(31,798), X_MASK, BOOKE64, { RT, RA0, RB } }, -{ "ldxe", X(31,799), X_MASK, BOOKE64, { RT, RA, RB } }, -{ "lduxe", X(31,831), X_MASK, BOOKE64, { RT, RA, RB } }, +{ "ldxe", X(31,799), X_MASK, BOOKE64, { RT, RA0, RB } }, +{ "lduxe", X(31,831), X_MASK, BOOKE64, { RT, RA0, RB } }, { "rac", X(31,818), X_MASK, PWRCOM, { RT, RA, RB } }, +{ "lhzcix", X(31,821), X_MASK, POWER6, { RT, RA0, RB } }, + { "dss", XDSS(31,822,0), XDSS_MASK, PPCVEC, { STRM } }, { "dssall", XDSS(31,822,1), XDSS_MASK, PPCVEC, { 0 } }, @@ -4238,19 +4433,25 @@ const struct powerpc_opcode powerpc_opcodes[] = { { "slbmfev", X(31,851), XRA_MASK, PPC64, { RT, RB } }, +{ "lbzcix", X(31,853), X_MASK, POWER6, { RT, RA0, RB } }, + { "mbar", X(31,854), X_MASK, BOOKE, { MO } }, { "eieio", X(31,854), 0xffffffff, PPC, { 0 } }, -{ "tlbsx", XRC(31,914,0), X_MASK, BOOKE, { RA, RB } }, -{ "tlbsx", XRC(31,914,0), X_MASK, PPC403, { RT, RA, RB } }, -{ "tlbsx.", XRC(31,914,1), X_MASK, BOOKE, { RA, RB } }, -{ "tlbsx.", XRC(31,914,1), X_MASK, PPC403, { RT, RA, RB } }, +{ "lfiwax", X(31,855), X_MASK, POWER6, { FRT, RA0, RB } }, + +{ "ldcix", X(31,885), X_MASK, POWER6, { RT, RA0, RB } }, + +{ "tlbsx", XRC(31,914,0), X_MASK, PPC403|BOOKE, { RTO, RA, RB } }, +{ "tlbsx.", XRC(31,914,1), X_MASK, PPC403|BOOKE, { RTO, RA, RB } }, { "tlbsxe", XRC(31,915,0), X_MASK, BOOKE64, { RA, RB } }, { "tlbsxe.", XRC(31,915,1), X_MASK, BOOKE64, { RA, RB } }, { "slbmfee", X(31,915), XRA_MASK, PPC64, { RT, RB } }, -{ "sthbrx", X(31,918), X_MASK, COM, { RS, RA, RB } }, +{ "stwcix", X(31,917), X_MASK, POWER6, { RS, RA0, RB } }, + +{ "sthbrx", X(31,918), X_MASK, COM, { RS, RA0, RB } }, { "sraq", XRC(31,920,0), X_MASK, M601, { RA, RS, RB } }, { "sraq.", XRC(31,920,1), X_MASK, M601, { RA, RS, RB } }, @@ -4263,14 +4464,15 @@ const struct powerpc_opcode powerpc_opcodes[] = { { "extsh.", XRC(31,922,1), XRB_MASK, PPCCOM, { RA, RS } }, { "exts.", XRC(31,922,1), XRB_MASK, PWRCOM, { RA, RS } }, -{ "sthbrxe", X(31,926), X_MASK, BOOKE64, { RS, RA, RB } }, +{ "sthbrxe", X(31,926), X_MASK, BOOKE64, { RS, RA0, RB } }, -{ "stdxe", X(31,927), X_MASK, BOOKE64, { RS, RA, RB } }, +{ "stdxe", X(31,927), X_MASK, BOOKE64, { RS, RA0, RB } }, { "tlbrehi", XTLB(31,946,0), XTLB_MASK, PPC403, { RT, RA } }, { "tlbrelo", XTLB(31,946,1), XTLB_MASK, PPC403, { RT, RA } }, -{ "tlbre", X(31,946), X_MASK, BOOKE, { 0 } }, -{ "tlbre", X(31,946), X_MASK, PPC403, { RS, RA, SH } }, +{ "tlbre", X(31,946), X_MASK, PPC403|BOOKE, { RSO, RAOPT, SHO } }, + +{ "sthcix", X(31,949), X_MASK, POWER6, { RS, RA0, RB } }, { "sraiq", XRC(31,952,0), X_MASK, M601, { RA, RS, SH } }, { "sraiq.", XRC(31,952,1), X_MASK, M601, { RA, RS, SH } }, @@ -4284,13 +4486,14 @@ const struct powerpc_opcode powerpc_opcodes[] = { { "tlbwehi", XTLB(31,978,0), XTLB_MASK, PPC403, { RT, RA } }, { "tlbwelo", XTLB(31,978,1), XTLB_MASK, PPC403, { RT, RA } }, -{ "tlbwe", X(31,978), X_MASK, BOOKE, { 0 } }, -{ "tlbwe", X(31,978), X_MASK, PPC403, { RS, RA, SH } }, +{ "tlbwe", X(31,978), X_MASK, PPC403|BOOKE, { RSO, RAOPT, SHO } }, { "tlbld", X(31,978), XRTRA_MASK, PPC, { RB } }, +{ "stbcix", X(31,981), X_MASK, POWER6, { RS, RA0, RB } }, + { "icbi", X(31,982), XRT_MASK, PPC, { RA, RB } }, -{ "stfiwx", X(31,983), X_MASK, PPC, { FRS, RA, RB } }, +{ "stfiwx", X(31,983), X_MASK, PPC, { FRS, RA0, RB } }, { "extsw", XRC(31,986,0), XRB_MASK, PPC64 | BOOKE64,{ RA, RS } }, { "extsw.", XRC(31,986,1), XRB_MASK, PPC64, { RA, RS } }, @@ -4298,10 +4501,13 @@ const struct powerpc_opcode powerpc_opcodes[] = { { "icread", X(31,998), XRT_MASK, PPC403|PPC440, { RA, RB } }, { "icbie", X(31,990), XRT_MASK, BOOKE64, { RA, RB } }, -{ "stfiwxe", X(31,991), X_MASK, BOOKE64, { FRS, RA, RB } }, +{ "stfiwxe", X(31,991), X_MASK, BOOKE64, { FRS, RA0, RB } }, { "tlbli", X(31,1010), XRTRA_MASK, PPC, { RB } }, +{ "stdcix", X(31,1013), X_MASK, POWER6, { RS, RA0, RB } }, + +{ "dcbzl", XOPL(31,1014,1), XRT_MASK,POWER4, { RA, RB } }, { "dcbz", X(31,1014), XRT_MASK, PPC, { RA, RB } }, { "dclz", X(31,1014), XRT_MASK, PPC, { RA, RB } }, @@ -4320,86 +4526,104 @@ const struct powerpc_opcode powerpc_opcodes[] = { { "stvx", X(31, 231), X_MASK, PPCVEC, { VS, RA, RB } }, { "stvxl", X(31, 487), X_MASK, PPCVEC, { VS, RA, RB } }, -{ "lwz", OP(32), OP_MASK, PPCCOM, { RT, D, RA } }, -{ "l", OP(32), OP_MASK, PWRCOM, { RT, D, RA } }, +/* New load/store left/right index vector instructions that are in the Cell only. */ +{ "lvlx", X(31, 519), X_MASK, CELL, { VD, RA0, RB } }, +{ "lvlxl", X(31, 775), X_MASK, CELL, { VD, RA0, RB } }, +{ "lvrx", X(31, 551), X_MASK, CELL, { VD, RA0, RB } }, +{ "lvrxl", X(31, 807), X_MASK, CELL, { VD, RA0, RB } }, +{ "stvlx", X(31, 647), X_MASK, CELL, { VS, RA0, RB } }, +{ "stvlxl", X(31, 903), X_MASK, CELL, { VS, RA0, RB } }, +{ "stvrx", X(31, 679), X_MASK, CELL, { VS, RA0, RB } }, +{ "stvrxl", X(31, 935), X_MASK, CELL, { VS, RA0, RB } }, + +{ "lwz", OP(32), OP_MASK, PPCCOM, { RT, D, RA0 } }, +{ "l", OP(32), OP_MASK, PWRCOM, { RT, D, RA0 } }, { "lwzu", OP(33), OP_MASK, PPCCOM, { RT, D, RAL } }, -{ "lu", OP(33), OP_MASK, PWRCOM, { RT, D, RA } }, +{ "lu", OP(33), OP_MASK, PWRCOM, { RT, D, RA0 } }, -{ "lbz", OP(34), OP_MASK, COM, { RT, D, RA } }, +{ "lbz", OP(34), OP_MASK, COM, { RT, D, RA0 } }, { "lbzu", OP(35), OP_MASK, COM, { RT, D, RAL } }, -{ "stw", OP(36), OP_MASK, PPCCOM, { RS, D, RA } }, -{ "st", OP(36), OP_MASK, PWRCOM, { RS, D, RA } }, +{ "stw", OP(36), OP_MASK, PPCCOM, { RS, D, RA0 } }, +{ "st", OP(36), OP_MASK, PWRCOM, { RS, D, RA0 } }, { "stwu", OP(37), OP_MASK, PPCCOM, { RS, D, RAS } }, -{ "stu", OP(37), OP_MASK, PWRCOM, { RS, D, RA } }, +{ "stu", OP(37), OP_MASK, PWRCOM, { RS, D, RA0 } }, -{ "stb", OP(38), OP_MASK, COM, { RS, D, RA } }, +{ "stb", OP(38), OP_MASK, COM, { RS, D, RA0 } }, { "stbu", OP(39), OP_MASK, COM, { RS, D, RAS } }, -{ "lhz", OP(40), OP_MASK, COM, { RT, D, RA } }, +{ "lhz", OP(40), OP_MASK, COM, { RT, D, RA0 } }, { "lhzu", OP(41), OP_MASK, COM, { RT, D, RAL } }, -{ "lha", OP(42), OP_MASK, COM, { RT, D, RA } }, +{ "lha", OP(42), OP_MASK, COM, { RT, D, RA0 } }, { "lhau", OP(43), OP_MASK, COM, { RT, D, RAL } }, -{ "sth", OP(44), OP_MASK, COM, { RS, D, RA } }, +{ "sth", OP(44), OP_MASK, COM, { RS, D, RA0 } }, { "sthu", OP(45), OP_MASK, COM, { RS, D, RAS } }, { "lmw", OP(46), OP_MASK, PPCCOM, { RT, D, RAM } }, -{ "lm", OP(46), OP_MASK, PWRCOM, { RT, D, RA } }, +{ "lm", OP(46), OP_MASK, PWRCOM, { RT, D, RA0 } }, -{ "stmw", OP(47), OP_MASK, PPCCOM, { RS, D, RA } }, -{ "stm", OP(47), OP_MASK, PWRCOM, { RS, D, RA } }, +{ "stmw", OP(47), OP_MASK, PPCCOM, { RS, D, RA0 } }, +{ "stm", OP(47), OP_MASK, PWRCOM, { RS, D, RA0 } }, -{ "lfs", OP(48), OP_MASK, COM, { FRT, D, RA } }, +{ "lfs", OP(48), OP_MASK, COM, { FRT, D, RA0 } }, { "lfsu", OP(49), OP_MASK, COM, { FRT, D, RAS } }, -{ "lfd", OP(50), OP_MASK, COM, { FRT, D, RA } }, +{ "lfd", OP(50), OP_MASK, COM, { FRT, D, RA0 } }, { "lfdu", OP(51), OP_MASK, COM, { FRT, D, RAS } }, -{ "stfs", OP(52), OP_MASK, COM, { FRS, D, RA } }, +{ "stfs", OP(52), OP_MASK, COM, { FRS, D, RA0 } }, { "stfsu", OP(53), OP_MASK, COM, { FRS, D, RAS } }, -{ "stfd", OP(54), OP_MASK, COM, { FRS, D, RA } }, +{ "stfd", OP(54), OP_MASK, COM, { FRS, D, RA0 } }, { "stfdu", OP(55), OP_MASK, COM, { FRS, D, RAS } }, { "lq", OP(56), OP_MASK, POWER4, { RTQ, DQ, RAQ } }, -{ "lfq", OP(56), OP_MASK, POWER2, { FRT, D, RA } }, +{ "lfq", OP(56), OP_MASK, POWER2, { FRT, D, RA0 } }, + +{ "lfqu", OP(57), OP_MASK, POWER2, { FRT, D, RA0 } }, -{ "lfqu", OP(57), OP_MASK, POWER2, { FRT, D, RA } }, +{ "lfdp", OP(57), OP_MASK, POWER6, { FRT, D, RA0 } }, -{ "lbze", DEO(58,0), DE_MASK, BOOKE64, { RT, DE, RA } }, +{ "lbze", DEO(58,0), DE_MASK, BOOKE64, { RT, DE, RA0 } }, { "lbzue", DEO(58,1), DE_MASK, BOOKE64, { RT, DE, RAL } }, -{ "lhze", DEO(58,2), DE_MASK, BOOKE64, { RT, DE, RA } }, +{ "lhze", DEO(58,2), DE_MASK, BOOKE64, { RT, DE, RA0 } }, { "lhzue", DEO(58,3), DE_MASK, BOOKE64, { RT, DE, RAL } }, -{ "lhae", DEO(58,4), DE_MASK, BOOKE64, { RT, DE, RA } }, +{ "lhae", DEO(58,4), DE_MASK, BOOKE64, { RT, DE, RA0 } }, { "lhaue", DEO(58,5), DE_MASK, BOOKE64, { RT, DE, RAL } }, -{ "lwze", DEO(58,6), DE_MASK, BOOKE64, { RT, DE, RA } }, +{ "lwze", DEO(58,6), DE_MASK, BOOKE64, { RT, DE, RA0 } }, { "lwzue", DEO(58,7), DE_MASK, BOOKE64, { RT, DE, RAL } }, -{ "stbe", DEO(58,8), DE_MASK, BOOKE64, { RS, DE, RA } }, +{ "stbe", DEO(58,8), DE_MASK, BOOKE64, { RS, DE, RA0 } }, { "stbue", DEO(58,9), DE_MASK, BOOKE64, { RS, DE, RAS } }, -{ "sthe", DEO(58,10), DE_MASK, BOOKE64, { RS, DE, RA } }, +{ "sthe", DEO(58,10), DE_MASK, BOOKE64, { RS, DE, RA0 } }, { "sthue", DEO(58,11), DE_MASK, BOOKE64, { RS, DE, RAS } }, -{ "stwe", DEO(58,14), DE_MASK, BOOKE64, { RS, DE, RA } }, +{ "stwe", DEO(58,14), DE_MASK, BOOKE64, { RS, DE, RA0 } }, { "stwue", DEO(58,15), DE_MASK, BOOKE64, { RS, DE, RAS } }, -{ "ld", DSO(58,0), DS_MASK, PPC64, { RT, DS, RA } }, +{ "ld", DSO(58,0), DS_MASK, PPC64, { RT, DS, RA0 } }, { "ldu", DSO(58,1), DS_MASK, PPC64, { RT, DS, RAL } }, -{ "lwa", DSO(58,2), DS_MASK, PPC64, { RT, DS, RA } }, +{ "lwa", DSO(58,2), DS_MASK, PPC64, { RT, DS, RA0 } }, + +{ "dadd", XRC(59,2,0), X_MASK, POWER6, { FRT, FRA, FRB } }, +{ "dadd.", XRC(59,2,1), X_MASK, POWER6, { FRT, FRA, FRB } }, + +{ "dqua", ZRC(59,3,0), Z_MASK, POWER6, { FRT, FRA, FRB, RMC } }, +{ "dqua.", ZRC(59,3,1), Z_MASK, POWER6, { FRT, FRA, FRB, RMC } }, { "fdivs", A(59,18,0), AFRC_MASK, PPC, { FRT, FRA, FRB } }, { "fdivs.", A(59,18,1), AFRC_MASK, PPC, { FRT, FRA, FRB } }, @@ -4413,12 +4637,15 @@ const struct powerpc_opcode powerpc_opcodes[] = { { "fsqrts", A(59,22,0), AFRAFRC_MASK, PPC, { FRT, FRB } }, { "fsqrts.", A(59,22,1), AFRAFRC_MASK, PPC, { FRT, FRB } }, -{ "fres", A(59,24,0), AFRAFRC_MASK, PPC, { FRT, FRB } }, -{ "fres.", A(59,24,1), AFRAFRC_MASK, PPC, { FRT, FRB } }, +{ "fres", A(59,24,0), AFRALFRC_MASK, PPC, { FRT, FRB, A_L } }, +{ "fres.", A(59,24,1), AFRALFRC_MASK, PPC, { FRT, FRB, A_L } }, { "fmuls", A(59,25,0), AFRB_MASK, PPC, { FRT, FRA, FRC } }, { "fmuls.", A(59,25,1), AFRB_MASK, PPC, { FRT, FRA, FRC } }, +{ "frsqrtes", A(59,26,0), AFRALFRC_MASK,POWER5, { FRT, FRB, A_L } }, +{ "frsqrtes.",A(59,26,1), AFRALFRC_MASK,POWER5, { FRT, FRB, A_L } }, + { "fmsubs", A(59,28,0), A_MASK, PPC, { FRT,FRA,FRC,FRB } }, { "fmsubs.", A(59,28,1), A_MASK, PPC, { FRT,FRA,FRC,FRB } }, @@ -4431,31 +4658,103 @@ const struct powerpc_opcode powerpc_opcodes[] = { { "fnmadds", A(59,31,0), A_MASK, PPC, { FRT,FRA,FRC,FRB } }, { "fnmadds.",A(59,31,1), A_MASK, PPC, { FRT,FRA,FRC,FRB } }, +{ "dmul", XRC(59,34,0), X_MASK, POWER6, { FRT, FRA, FRB } }, +{ "dmul.", XRC(59,34,1), X_MASK, POWER6, { FRT, FRA, FRB } }, + +{ "drrnd", ZRC(59,35,0), Z_MASK, POWER6, { FRT, FRA, FRB, RMC } }, +{ "drrnd.", ZRC(59,35,1), Z_MASK, POWER6, { FRT, FRA, FRB, RMC } }, + +{ "dscli", ZRC(59,66,0), Z_MASK, POWER6, { FRT, FRA, SH16 } }, +{ "dscli.", ZRC(59,66,1), Z_MASK, POWER6, { FRT, FRA, SH16 } }, + +{ "dquai", ZRC(59,67,0), Z_MASK, POWER6, { TE, FRT, FRB, RMC } }, +{ "dquai.", ZRC(59,67,1), Z_MASK, POWER6, { TE, FRT, FRB, RMC } }, + +{ "dscri", ZRC(59,98,0), Z_MASK, POWER6, { FRT, FRA, SH16 } }, +{ "dscri.", ZRC(59,98,1), Z_MASK, POWER6, { FRT, FRA, SH16 } }, + +{ "drintx", ZRC(59,99,0), Z_MASK, POWER6, { R, FRT, FRB, RMC } }, +{ "drintx.", ZRC(59,99,1), Z_MASK, POWER6, { R, FRT, FRB, RMC } }, + +{ "dcmpo", X(59,130), X_MASK, POWER6, { BF, FRA, FRB } }, + +{ "dtstex", X(59,162), X_MASK, POWER6, { BF, FRA, FRB } }, +{ "dtstdc", Z(59,194), Z_MASK, POWER6, { BF, FRA, DCM } }, +{ "dtstdg", Z(59,226), Z_MASK, POWER6, { BF, FRA, DGM } }, + +{ "drintn", ZRC(59,227,0), Z_MASK, POWER6, { R, FRT, FRB, RMC } }, +{ "drintn.", ZRC(59,227,1), Z_MASK, POWER6, { R, FRT, FRB, RMC } }, + +{ "dctdp", XRC(59,258,0), X_MASK, POWER6, { FRT, FRB } }, +{ "dctdp.", XRC(59,258,1), X_MASK, POWER6, { FRT, FRB } }, + +{ "dctfix", XRC(59,290,0), X_MASK, POWER6, { FRT, FRB } }, +{ "dctfix.", XRC(59,290,1), X_MASK, POWER6, { FRT, FRB } }, + +{ "ddedpd", XRC(59,322,0), X_MASK, POWER6, { SP, FRT, FRB } }, +{ "ddedpd.", XRC(59,322,1), X_MASK, POWER6, { SP, FRT, FRB } }, + +{ "dxex", XRC(59,354,0), X_MASK, POWER6, { FRT, FRB } }, +{ "dxex.", XRC(59,354,1), X_MASK, POWER6, { FRT, FRB } }, + +{ "dsub", XRC(59,514,0), X_MASK, POWER6, { FRT, FRA, FRB } }, +{ "dsub.", XRC(59,514,1), X_MASK, POWER6, { FRT, FRA, FRB } }, + +{ "ddiv", XRC(59,546,0), X_MASK, POWER6, { FRT, FRA, FRB } }, +{ "ddiv.", XRC(59,546,1), X_MASK, POWER6, { FRT, FRA, FRB } }, + +{ "dcmpu", X(59,642), X_MASK, POWER6, { BF, FRA, FRB } }, + +{ "dtstsf", X(59,674), X_MASK, POWER6, { BF, FRA, FRB } }, + +{ "drsp", XRC(59,770,0), X_MASK, POWER6, { FRT, FRB } }, +{ "drsp.", XRC(59,770,1), X_MASK, POWER6, { FRT, FRB } }, + +{ "dcffix", XRC(59,802,0), X_MASK, POWER6, { FRT, FRB } }, +{ "dcffix.", XRC(59,802,1), X_MASK, POWER6, { FRT, FRB } }, + +{ "denbcd", XRC(59,834,0), X_MASK, POWER6, { S, FRT, FRB } }, +{ "denbcd.", XRC(59,834,1), X_MASK, POWER6, { S, FRT, FRB } }, + +{ "diex", XRC(59,866,0), X_MASK, POWER6, { FRT, FRA, FRB } }, +{ "diex.", XRC(59,866,1), X_MASK, POWER6, { FRT, FRA, FRB } }, + { "stfq", OP(60), OP_MASK, POWER2, { FRS, D, RA } }, { "stfqu", OP(61), OP_MASK, POWER2, { FRS, D, RA } }, -{ "lde", DEO(62,0), DE_MASK, BOOKE64, { RT, DES, RA } }, -{ "ldue", DEO(62,1), DE_MASK, BOOKE64, { RT, DES, RA } }, -{ "lfse", DEO(62,4), DE_MASK, BOOKE64, { FRT, DES, RA } }, +{ "stfdp", OP(61), OP_MASK, POWER6, { FRT, D, RA0 } }, + +{ "lde", DEO(62,0), DE_MASK, BOOKE64, { RT, DES, RA0 } }, +{ "ldue", DEO(62,1), DE_MASK, BOOKE64, { RT, DES, RA0 } }, +{ "lfse", DEO(62,4), DE_MASK, BOOKE64, { FRT, DES, RA0 } }, { "lfsue", DEO(62,5), DE_MASK, BOOKE64, { FRT, DES, RAS } }, -{ "lfde", DEO(62,6), DE_MASK, BOOKE64, { FRT, DES, RA } }, +{ "lfde", DEO(62,6), DE_MASK, BOOKE64, { FRT, DES, RA0 } }, { "lfdue", DEO(62,7), DE_MASK, BOOKE64, { FRT, DES, RAS } }, -{ "stde", DEO(62,8), DE_MASK, BOOKE64, { RS, DES, RA } }, +{ "stde", DEO(62,8), DE_MASK, BOOKE64, { RS, DES, RA0 } }, { "stdue", DEO(62,9), DE_MASK, BOOKE64, { RS, DES, RAS } }, -{ "stfse", DEO(62,12), DE_MASK, BOOKE64, { FRS, DES, RA } }, +{ "stfse", DEO(62,12), DE_MASK, BOOKE64, { FRS, DES, RA0 } }, { "stfsue", DEO(62,13), DE_MASK, BOOKE64, { FRS, DES, RAS } }, -{ "stfde", DEO(62,14), DE_MASK, BOOKE64, { FRS, DES, RA } }, +{ "stfde", DEO(62,14), DE_MASK, BOOKE64, { FRS, DES, RA0 } }, { "stfdue", DEO(62,15), DE_MASK, BOOKE64, { FRS, DES, RAS } }, -{ "std", DSO(62,0), DS_MASK, PPC64, { RS, DS, RA } }, +{ "std", DSO(62,0), DS_MASK, PPC64, { RS, DS, RA0 } }, { "stdu", DSO(62,1), DS_MASK, PPC64, { RS, DS, RAS } }, -{ "stq", DSO(62,2), DS_MASK, POWER4, { RSQ, DS, RA } }, +{ "stq", DSO(62,2), DS_MASK, POWER4, { RSQ, DS, RA0 } }, { "fcmpu", X(63,0), X_MASK|(3<<21), COM, { BF, FRA, FRB } }, +{ "daddq", XRC(63,2,0), X_MASK, POWER6, { FRT, FRA, FRB } }, +{ "daddq.", XRC(63,2,1), X_MASK, POWER6, { FRT, FRA, FRB } }, + +{ "dquaq", ZRC(63,3,0), Z_MASK, POWER6, { FRT, FRA, FRB, RMC } }, +{ "dquaq.", ZRC(63,3,1), Z_MASK, POWER6, { FRT, FRA, FRB, RMC } }, + +{ "fcpsgn", XRC(63,8,0), X_MASK, POWER6, { FRT, FRA, FRB } }, +{ "fcpsgn.", XRC(63,8,1), X_MASK, POWER6, { FRT, FRA, FRB } }, + { "frsp", XRC(63,12,0), XRA_MASK, COM, { FRT, FRB } }, { "frsp.", XRC(63,12,1), XRA_MASK, COM, { FRT, FRB } }, @@ -4490,13 +4789,16 @@ const struct powerpc_opcode powerpc_opcodes[] = { { "fsel", A(63,23,0), A_MASK, PPC, { FRT,FRA,FRC,FRB } }, { "fsel.", A(63,23,1), A_MASK, PPC, { FRT,FRA,FRC,FRB } }, +{ "fre", A(63,24,0), AFRALFRC_MASK, POWER5, { FRT, FRB, A_L } }, +{ "fre.", A(63,24,1), AFRALFRC_MASK, POWER5, { FRT, FRB, A_L } }, + { "fmul", A(63,25,0), AFRB_MASK, PPCCOM, { FRT, FRA, FRC } }, { "fm", A(63,25,0), AFRB_MASK, PWRCOM, { FRT, FRA, FRC } }, { "fmul.", A(63,25,1), AFRB_MASK, PPCCOM, { FRT, FRA, FRC } }, { "fm.", A(63,25,1), AFRB_MASK, PWRCOM, { FRT, FRA, FRC } }, -{ "frsqrte", A(63,26,0), AFRAFRC_MASK, PPC, { FRT, FRB } }, -{ "frsqrte.",A(63,26,1), AFRAFRC_MASK, PPC, { FRT, FRB } }, +{ "frsqrte", A(63,26,0), AFRALFRC_MASK, PPC, { FRT, FRB, A_L } }, +{ "frsqrte.",A(63,26,1), AFRALFRC_MASK, PPC, { FRT, FRB, A_L } }, { "fmsub", A(63,28,0), A_MASK, PPCCOM, { FRT,FRA,FRC,FRB } }, { "fms", A(63,28,0), A_MASK, PWRCOM, { FRT,FRA,FRC,FRB } }, @@ -4520,6 +4822,12 @@ const struct powerpc_opcode powerpc_opcodes[] = { { "fcmpo", X(63,32), X_MASK|(3<<21), COM, { BF, FRA, FRB } }, +{ "dmulq", XRC(63,34,0), X_MASK, POWER6, { FRT, FRA, FRB } }, +{ "dmulq.", XRC(63,34,1), X_MASK, POWER6, { FRT, FRA, FRB } }, + +{ "drrndq", ZRC(63,35,0), Z_MASK, POWER6, { FRT, FRA, FRB, RMC } }, +{ "drrndq.", ZRC(63,35,1), Z_MASK, POWER6, { FRT, FRA, FRB, RMC } }, + { "mtfsb1", XRC(63,38,0), XRARB_MASK, COM, { BT } }, { "mtfsb1.", XRC(63,38,1), XRARB_MASK, COM, { BT } }, @@ -4528,36 +4836,100 @@ const struct powerpc_opcode powerpc_opcodes[] = { { "mcrfs", X(63,64), XRB_MASK|(3<<21)|(3<<16), COM, { BF, BFA } }, +{ "dscliq", ZRC(63,66,0), Z_MASK, POWER6, { FRT, FRA, SH16 } }, +{ "dscliq.", ZRC(63,66,1), Z_MASK, POWER6, { FRT, FRA, SH16 } }, + +{ "dquaiq", ZRC(63,67,0), Z_MASK, POWER6, { TE, FRT, FRB, RMC } }, +{ "dquaiq.", ZRC(63,67,1), Z_MASK, POWER6, { FRT, FRA, FRB, RMC } }, + { "mtfsb0", XRC(63,70,0), XRARB_MASK, COM, { BT } }, { "mtfsb0.", XRC(63,70,1), XRARB_MASK, COM, { BT } }, { "fmr", XRC(63,72,0), XRA_MASK, COM, { FRT, FRB } }, { "fmr.", XRC(63,72,1), XRA_MASK, COM, { FRT, FRB } }, +{ "dscriq", ZRC(63,98,0), Z_MASK, POWER6, { FRT, FRA, SH16 } }, +{ "dscriq.", ZRC(63,98,1), Z_MASK, POWER6, { FRT, FRA, SH16 } }, + +{ "drintxq", ZRC(63,99,0), Z_MASK, POWER6, { R, FRT, FRB, RMC } }, +{ "drintxq.",ZRC(63,99,1), Z_MASK, POWER6, { R, FRT, FRB, RMC } }, + +{ "dcmpoq", X(63,130), X_MASK, POWER6, { BF, FRA, FRB } }, + { "mtfsfi", XRC(63,134,0), XRA_MASK|(3<<21)|(1<<11), COM, { BF, U } }, { "mtfsfi.", XRC(63,134,1), XRA_MASK|(3<<21)|(1<<11), COM, { BF, U } }, { "fnabs", XRC(63,136,0), XRA_MASK, COM, { FRT, FRB } }, { "fnabs.", XRC(63,136,1), XRA_MASK, COM, { FRT, FRB } }, +{ "dtstexq", X(63,162), X_MASK, POWER6, { BF, FRA, FRB } }, +{ "dtstdcq", Z(63,194), Z_MASK, POWER6, { BF, FRA, DCM } }, +{ "dtstdgq", Z(63,226), Z_MASK, POWER6, { BF, FRA, DGM } }, + +{ "drintnq", ZRC(63,227,0), Z_MASK, POWER6, { R, FRT, FRB, RMC } }, +{ "drintnq.",ZRC(63,227,1), Z_MASK, POWER6, { R, FRT, FRB, RMC } }, + +{ "dctqpq", XRC(63,258,0), X_MASK, POWER6, { FRT, FRB } }, +{ "dctqpq.", XRC(63,258,1), X_MASK, POWER6, { FRT, FRB } }, + { "fabs", XRC(63,264,0), XRA_MASK, COM, { FRT, FRB } }, { "fabs.", XRC(63,264,1), XRA_MASK, COM, { FRT, FRB } }, +{ "dctfixq", XRC(63,290,0), X_MASK, POWER6, { FRT, FRB } }, +{ "dctfixq.",XRC(63,290,1), X_MASK, POWER6, { FRT, FRB } }, + +{ "ddedpdq", XRC(63,322,0), X_MASK, POWER6, { SP, FRT, FRB } }, +{ "ddedpdq.",XRC(63,322,1), X_MASK, POWER6, { SP, FRT, FRB } }, + +{ "dxexq", XRC(63,354,0), X_MASK, POWER6, { FRT, FRB } }, +{ "dxexq.", XRC(63,354,1), X_MASK, POWER6, { FRT, FRB } }, + +{ "frin", XRC(63,392,0), XRA_MASK, POWER5, { FRT, FRB } }, +{ "frin.", XRC(63,392,1), XRA_MASK, POWER5, { FRT, FRB } }, +{ "friz", XRC(63,424,0), XRA_MASK, POWER5, { FRT, FRB } }, +{ "friz.", XRC(63,424,1), XRA_MASK, POWER5, { FRT, FRB } }, +{ "frip", XRC(63,456,0), XRA_MASK, POWER5, { FRT, FRB } }, +{ "frip.", XRC(63,456,1), XRA_MASK, POWER5, { FRT, FRB } }, +{ "frim", XRC(63,488,0), XRA_MASK, POWER5, { FRT, FRB } }, +{ "frim.", XRC(63,488,1), XRA_MASK, POWER5, { FRT, FRB } }, + +{ "dsubq", XRC(63,514,0), X_MASK, POWER6, { FRT, FRA, FRB } }, +{ "dsubq.", XRC(63,514,1), X_MASK, POWER6, { FRT, FRA, FRB } }, + +{ "ddivq", XRC(63,546,0), X_MASK, POWER6, { FRT, FRA, FRB } }, +{ "ddivq.", XRC(63,546,1), X_MASK, POWER6, { FRT, FRA, FRB } }, + { "mffs", XRC(63,583,0), XRARB_MASK, COM, { FRT } }, { "mffs.", XRC(63,583,1), XRARB_MASK, COM, { FRT } }, +{ "dcmpuq", X(63,642), X_MASK, POWER6, { BF, FRA, FRB } }, + +{ "dtstsfq", X(63,674), X_MASK, POWER6, { BF, FRA, FRB } }, + { "mtfsf", XFL(63,711,0), XFL_MASK, COM, { FLM, FRB } }, { "mtfsf.", XFL(63,711,1), XFL_MASK, COM, { FLM, FRB } }, +{ "drdpq", XRC(63,770,0), X_MASK, POWER6, { FRT, FRB } }, +{ "drdpq.", XRC(63,770,1), X_MASK, POWER6, { FRT, FRB } }, + +{ "dcffixq", XRC(63,802,0), X_MASK, POWER6, { FRT, FRB } }, +{ "dcffixq.",XRC(63,802,1), X_MASK, POWER6, { FRT, FRB } }, + { "fctid", XRC(63,814,0), XRA_MASK, PPC64, { FRT, FRB } }, { "fctid.", XRC(63,814,1), XRA_MASK, PPC64, { FRT, FRB } }, { "fctidz", XRC(63,815,0), XRA_MASK, PPC64, { FRT, FRB } }, { "fctidz.", XRC(63,815,1), XRA_MASK, PPC64, { FRT, FRB } }, +{ "denbcdq", XRC(63,834,0), X_MASK, POWER6, { S, FRT, FRB } }, +{ "denbcdq.",XRC(63,834,1), X_MASK, POWER6, { S, FRT, FRB } }, + { "fcfid", XRC(63,846,0), XRA_MASK, PPC64, { FRT, FRB } }, { "fcfid.", XRC(63,846,1), XRA_MASK, PPC64, { FRT, FRB } }, +{ "diexq", XRC(63,866,0), X_MASK, POWER6, { FRT, FRA, FRB } }, +{ "diexq.", XRC(63,866,1), X_MASK, POWER6, { FRT, FRA, FRB } }, + }; const int powerpc_num_opcodes = diff --git a/arch/powerpc/xmon/ppc.h b/arch/powerpc/xmon/ppc.h index 342237e8dd6..110df96354b 100644 --- a/arch/powerpc/xmon/ppc.h +++ b/arch/powerpc/xmon/ppc.h @@ -1,5 +1,5 @@ /* ppc.h -- Header file for PowerPC opcode table - Copyright 1994, 1995, 1999, 2000, 2001, 2002, 2003 + Copyright 1994, 1995, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006 Free Software Foundation, Inc. Written by Ian Lance Taylor, Cygnus Support @@ -17,7 +17,7 @@ the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this file; see the file COPYING. If not, write to the Free -Software Foundation, 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ +Software Foundation, 51 Franklin Street - Fifth Floor, Boston, MA 02110-1301, USA. */ #ifndef PPC_H #define PPC_H @@ -134,6 +134,18 @@ extern const int powerpc_num_opcodes; /* Opcode is supported by machine check APU. */ #define PPC_OPCODE_RFMCI 0x800000 +/* Opcode is only supported by Power5 architecture. */ +#define PPC_OPCODE_POWER5 0x1000000 + +/* Opcode is supported by PowerPC e300 family. */ +#define PPC_OPCODE_E300 0x2000000 + +/* Opcode is only supported by Power6 architecture. */ +#define PPC_OPCODE_POWER6 0x4000000 + +/* Opcode is only supported by PowerPC Cell family. */ +#define PPC_OPCODE_CELL 0x8000000 + /* A macro to extract the major opcode from an instruction. */ #define PPC_OP(i) (((i) >> 26) & 0x3f) @@ -233,25 +245,28 @@ extern const struct powerpc_operand powerpc_operands[]; register names with a leading 'r'. */ #define PPC_OPERAND_GPR (040) +/* Like PPC_OPERAND_GPR, but don't print a leading 'r' for r0. */ +#define PPC_OPERAND_GPR_0 (0100) + /* This operand names a floating point register. The disassembler prints these with a leading 'f'. */ -#define PPC_OPERAND_FPR (0100) +#define PPC_OPERAND_FPR (0200) /* This operand is a relative branch displacement. The disassembler prints these symbolically if possible. */ -#define PPC_OPERAND_RELATIVE (0200) +#define PPC_OPERAND_RELATIVE (0400) /* This operand is an absolute branch address. The disassembler prints these symbolically if possible. */ -#define PPC_OPERAND_ABSOLUTE (0400) +#define PPC_OPERAND_ABSOLUTE (01000) /* This operand is optional, and is zero if omitted. This is used for - the optional BF and L fields in the comparison instructions. The + example, in the optional BF field in the comparison instructions. The assembler must count the number of operands remaining on the line, and the number of operands remaining for the opcode, and decide whether this operand is present or not. The disassembler should print this operand out only if it is not zero. */ -#define PPC_OPERAND_OPTIONAL (01000) +#define PPC_OPERAND_OPTIONAL (02000) /* This flag is only used with PPC_OPERAND_OPTIONAL. If this operand is omitted, then for the next operand use this operand value plus @@ -259,24 +274,24 @@ extern const struct powerpc_operand powerpc_operands[]; hack is needed because the Power rotate instructions can take either 4 or 5 operands. The disassembler should print this operand out regardless of the PPC_OPERAND_OPTIONAL field. */ -#define PPC_OPERAND_NEXT (02000) +#define PPC_OPERAND_NEXT (04000) /* This operand should be regarded as a negative number for the purposes of overflow checking (i.e., the normal most negative number is disallowed and one more than the normal most positive number is allowed). This flag will only be set for a signed operand. */ -#define PPC_OPERAND_NEGATIVE (04000) +#define PPC_OPERAND_NEGATIVE (010000) /* This operand names a vector unit register. The disassembler prints these with a leading 'v'. */ -#define PPC_OPERAND_VR (010000) +#define PPC_OPERAND_VR (020000) /* This operand is for the DS field in a DS form instruction. */ -#define PPC_OPERAND_DS (020000) +#define PPC_OPERAND_DS (040000) /* This operand is for the DQ field in a DQ form instruction. */ -#define PPC_OPERAND_DQ (040000) +#define PPC_OPERAND_DQ (0100000) /* The POWER and PowerPC assemblers use a few macros. We keep them with the operands table for simplicity. The macro table is an -- cgit v1.2.3-70-g09d2 From e28b003136b5b2f10c25b49c32df9b7742550c23 Mon Sep 17 00:00:00 2001 From: Geoff Levand Date: Thu, 23 Nov 2006 00:46:49 +0100 Subject: [POWERPC] cell: abstract spu management routines This adds a platform specific spu management abstraction and the coresponding routines to support the IBM Cell Blade. It also removes the hypervisor only resources that were included in struct spu. Three new platform specific routines are introduced, spu_enumerate_spus(), spu_create_spu() and spu_destroy_spu(). The underlying design uses a new type, struct spu_management_ops, to hold function pointers that the platform setup code is expected to initialize to instances appropriate to that platform. For the IBM Cell Blade support, I put the hypervisor only resources that were in struct spu into a platform specific data structure struct spu_pdata. Signed-off-by: Geoff Levand Signed-off-by: Arnd Bergmann --- arch/powerpc/platforms/cell/cbe_thermal.c | 5 +- arch/powerpc/platforms/cell/setup.c | 3 +- arch/powerpc/platforms/cell/spu_base.c | 334 ++------------------- arch/powerpc/platforms/cell/spu_priv1_mmio.c | 424 +++++++++++++++++++++++++-- arch/powerpc/platforms/cell/spu_priv1_mmio.h | 26 ++ include/asm-powerpc/spu.h | 5 +- include/asm-powerpc/spu_priv1.h | 40 ++- 7 files changed, 490 insertions(+), 347 deletions(-) create mode 100644 arch/powerpc/platforms/cell/spu_priv1_mmio.h (limited to 'arch/powerpc') diff --git a/arch/powerpc/platforms/cell/cbe_thermal.c b/arch/powerpc/platforms/cell/cbe_thermal.c index 17831a92d91..616a0a3fd0e 100644 --- a/arch/powerpc/platforms/cell/cbe_thermal.c +++ b/arch/powerpc/platforms/cell/cbe_thermal.c @@ -29,6 +29,7 @@ #include #include "cbe_regs.h" +#include "spu_priv1_mmio.h" static struct cbe_pmd_regs __iomem *get_pmd_regs(struct sys_device *sysdev) { @@ -36,7 +37,7 @@ static struct cbe_pmd_regs __iomem *get_pmd_regs(struct sys_device *sysdev) spu = container_of(sysdev, struct spu, sysdev); - return cbe_get_pmd_regs(spu->devnode); + return cbe_get_pmd_regs(spu_devnode(spu)); } /* returns the value for a given spu in a given register */ @@ -49,7 +50,7 @@ static u8 spu_read_register_value(struct sys_device *sysdev, union spe_reg __iom /* getting the id from the reg attribute will not work on future device-tree layouts * in future we should store the id to the spu struct and use it here */ spu = container_of(sysdev, struct spu, sysdev); - id = (unsigned int *)get_property(spu->devnode, "reg", NULL); + id = (unsigned int *)get_property(spu_devnode(spu), "reg", NULL); value.val = in_be64(®->val); return value.spe[*id]; diff --git a/arch/powerpc/platforms/cell/setup.c b/arch/powerpc/platforms/cell/setup.c index 83d5d0c2faf..36989c2eee6 100644 --- a/arch/powerpc/platforms/cell/setup.c +++ b/arch/powerpc/platforms/cell/setup.c @@ -145,7 +145,8 @@ static void __init cell_init_irq(void) static void __init cell_setup_arch(void) { #ifdef CONFIG_SPU_BASE - spu_priv1_ops = &spu_priv1_mmio_ops; + spu_priv1_ops = &spu_priv1_mmio_ops; + spu_management_ops = &spu_management_of_ops; #endif cbe_regs_init(); diff --git a/arch/powerpc/platforms/cell/spu_base.c b/arch/powerpc/platforms/cell/spu_base.c index d4f4f396288..841ed359802 100644 --- a/arch/powerpc/platforms/cell/spu_base.c +++ b/arch/powerpc/platforms/cell/spu_base.c @@ -25,23 +25,17 @@ #include #include #include -#include -#include #include #include #include - -#include -#include -#include +#include +#include #include #include #include -#include #include -#include "interrupt.h" - +const struct spu_management_ops *spu_management_ops; const struct spu_priv1_ops *spu_priv1_ops; EXPORT_SYMBOL_GPL(spu_priv1_ops); @@ -512,261 +506,6 @@ int spu_irq_class_1_bottom(struct spu *spu) return ret; } -static int __init find_spu_node_id(struct device_node *spe) -{ - const unsigned int *id; - struct device_node *cpu; - cpu = spe->parent->parent; - id = get_property(cpu, "node-id", NULL); - return id ? *id : 0; -} - -static int __init cell_spuprop_present(struct spu *spu, struct device_node *spe, - const char *prop) -{ - static DEFINE_MUTEX(add_spumem_mutex); - - const struct address_prop { - unsigned long address; - unsigned int len; - } __attribute__((packed)) *p; - int proplen; - - unsigned long start_pfn, nr_pages; - struct pglist_data *pgdata; - struct zone *zone; - int ret; - - p = get_property(spe, prop, &proplen); - WARN_ON(proplen != sizeof (*p)); - - start_pfn = p->address >> PAGE_SHIFT; - nr_pages = ((unsigned long)p->len + PAGE_SIZE - 1) >> PAGE_SHIFT; - - pgdata = NODE_DATA(spu->nid); - zone = pgdata->node_zones; - - /* XXX rethink locking here */ - mutex_lock(&add_spumem_mutex); - ret = __add_pages(zone, start_pfn, nr_pages); - mutex_unlock(&add_spumem_mutex); - - return ret; -} - -static void __iomem * __init map_spe_prop(struct spu *spu, - struct device_node *n, const char *name) -{ - const struct address_prop { - unsigned long address; - unsigned int len; - } __attribute__((packed)) *prop; - - const void *p; - int proplen; - void __iomem *ret = NULL; - int err = 0; - - p = get_property(n, name, &proplen); - if (proplen != sizeof (struct address_prop)) - return NULL; - - prop = p; - - err = cell_spuprop_present(spu, n, name); - if (err && (err != -EEXIST)) - goto out; - - ret = ioremap(prop->address, prop->len); - - out: - return ret; -} - -static void spu_unmap(struct spu *spu) -{ - iounmap(spu->priv2); - iounmap(spu->priv1); - iounmap(spu->problem); - iounmap((__force u8 __iomem *)spu->local_store); -} - -/* This function shall be abstracted for HV platforms */ -static int __init spu_map_interrupts_old(struct spu *spu, struct device_node *np) -{ - unsigned int isrc; - const u32 *tmp; - - /* Get the interrupt source unit from the device-tree */ - tmp = get_property(np, "isrc", NULL); - if (!tmp) - return -ENODEV; - isrc = tmp[0]; - - /* Add the node number */ - isrc |= spu->node << IIC_IRQ_NODE_SHIFT; - - /* Now map interrupts of all 3 classes */ - spu->irqs[0] = irq_create_mapping(NULL, IIC_IRQ_CLASS_0 | isrc); - spu->irqs[1] = irq_create_mapping(NULL, IIC_IRQ_CLASS_1 | isrc); - spu->irqs[2] = irq_create_mapping(NULL, IIC_IRQ_CLASS_2 | isrc); - - /* Right now, we only fail if class 2 failed */ - return spu->irqs[2] == NO_IRQ ? -EINVAL : 0; -} - -static int __init spu_map_device_old(struct spu *spu, struct device_node *node) -{ - const char *prop; - int ret; - - ret = -ENODEV; - spu->name = get_property(node, "name", NULL); - if (!spu->name) - goto out; - - prop = get_property(node, "local-store", NULL); - if (!prop) - goto out; - spu->local_store_phys = *(unsigned long *)prop; - - /* we use local store as ram, not io memory */ - spu->local_store = (void __force *) - map_spe_prop(spu, node, "local-store"); - if (!spu->local_store) - goto out; - - prop = get_property(node, "problem", NULL); - if (!prop) - goto out_unmap; - spu->problem_phys = *(unsigned long *)prop; - - spu->problem= map_spe_prop(spu, node, "problem"); - if (!spu->problem) - goto out_unmap; - - spu->priv1= map_spe_prop(spu, node, "priv1"); - /* priv1 is not available on a hypervisor */ - - spu->priv2= map_spe_prop(spu, node, "priv2"); - if (!spu->priv2) - goto out_unmap; - ret = 0; - goto out; - -out_unmap: - spu_unmap(spu); -out: - return ret; -} - -static int __init spu_map_interrupts(struct spu *spu, struct device_node *np) -{ - struct of_irq oirq; - int ret; - int i; - - for (i=0; i < 3; i++) { - ret = of_irq_map_one(np, i, &oirq); - if (ret) { - pr_debug("spu_new: failed to get irq %d\n", i); - goto err; - } - ret = -EINVAL; - pr_debug(" irq %d no 0x%x on %s\n", i, oirq.specifier[0], - oirq.controller->full_name); - spu->irqs[i] = irq_create_of_mapping(oirq.controller, - oirq.specifier, oirq.size); - if (spu->irqs[i] == NO_IRQ) { - pr_debug("spu_new: failed to map it !\n"); - goto err; - } - } - return 0; - -err: - pr_debug("failed to map irq %x for spu %s\n", *oirq.specifier, spu->name); - for (; i >= 0; i--) { - if (spu->irqs[i] != NO_IRQ) - irq_dispose_mapping(spu->irqs[i]); - } - return ret; -} - -static int spu_map_resource(struct device_node *node, int nr, - void __iomem** virt, unsigned long *phys) -{ - struct resource resource = { }; - int ret; - - ret = of_address_to_resource(node, nr, &resource); - if (ret) - goto out; - - if (phys) - *phys = resource.start; - *virt = ioremap(resource.start, resource.end - resource.start); - if (!*virt) - ret = -EINVAL; - -out: - return ret; -} - -static int __init spu_map_device(struct spu *spu, struct device_node *node) -{ - int ret = -ENODEV; - spu->name = get_property(node, "name", NULL); - if (!spu->name) - goto out; - - ret = spu_map_resource(node, 0, (void __iomem**)&spu->local_store, - &spu->local_store_phys); - if (ret) { - pr_debug("spu_new: failed to map %s resource 0\n", - node->full_name); - goto out; - } - ret = spu_map_resource(node, 1, (void __iomem**)&spu->problem, - &spu->problem_phys); - if (ret) { - pr_debug("spu_new: failed to map %s resource 1\n", - node->full_name); - goto out_unmap; - } - ret = spu_map_resource(node, 2, (void __iomem**)&spu->priv2, - NULL); - if (ret) { - pr_debug("spu_new: failed to map %s resource 2\n", - node->full_name); - goto out_unmap; - } - - if (!firmware_has_feature(FW_FEATURE_LPAR)) - ret = spu_map_resource(node, 3, (void __iomem**)&spu->priv1, - NULL); - if (ret) { - pr_debug("spu_new: failed to map %s resource 3\n", - node->full_name); - goto out_unmap; - } - pr_debug("spu_new: %s maps:\n", node->full_name); - pr_debug(" local store : 0x%016lx -> 0x%p\n", - spu->local_store_phys, spu->local_store); - pr_debug(" problem state : 0x%016lx -> 0x%p\n", - spu->problem_phys, spu->problem); - pr_debug(" priv2 : 0x%p\n", spu->priv2); - pr_debug(" priv1 : 0x%p\n", spu->priv1); - - return 0; - -out_unmap: - spu_unmap(spu); -out: - pr_debug("failed to map spe %s: %d\n", spu->name, ret); - return ret; -} - struct sysdev_class spu_sysdev_class = { set_kset_name("spu") }; @@ -846,7 +585,7 @@ static void spu_destroy_sysdev(struct spu *spu) sysdev_unregister(&spu->sysdev); } -static int __init create_spu(struct device_node *spe) +static int __init create_spu(void *data) { struct spu *spu; int ret; @@ -857,60 +596,37 @@ static int __init create_spu(struct device_node *spe) if (!spu) goto out; - spu->node = find_spu_node_id(spe); - if (spu->node >= MAX_NUMNODES) { - printk(KERN_WARNING "SPE %s on node %d ignored," - " node number too big\n", spe->full_name, spu->node); - printk(KERN_WARNING "Check if CONFIG_NUMA is enabled.\n"); - return -ENODEV; - } - spu->nid = of_node_to_nid(spe); - if (spu->nid == -1) - spu->nid = 0; + spin_lock_init(&spu->register_lock); + mutex_lock(&spu_mutex); + spu->number = number++; + mutex_unlock(&spu_mutex); + + ret = spu_create_spu(spu, data); - ret = spu_map_device(spu, spe); - /* try old method */ - if (ret) - ret = spu_map_device_old(spu, spe); if (ret) goto out_free; - ret = spu_map_interrupts(spu, spe); - if (ret) - ret = spu_map_interrupts_old(spu, spe); - if (ret) - goto out_unmap; - spin_lock_init(&spu->register_lock); spu_mfc_sdr_setup(spu); spu_mfc_sr1_set(spu, 0x33); - mutex_lock(&spu_mutex); - - spu->number = number++; ret = spu_request_irqs(spu); if (ret) - goto out_unlock; + goto out_destroy; ret = spu_create_sysdev(spu); if (ret) goto out_free_irqs; + mutex_lock(&spu_mutex); list_add(&spu->list, &spu_list[spu->node]); list_add(&spu->full_list, &spu_full_list); - spu->devnode = of_node_get(spe); - mutex_unlock(&spu_mutex); - pr_debug(KERN_DEBUG "Using SPE %s %p %p %p %p %d\n", - spu->name, spu->local_store, - spu->problem, spu->priv1, spu->priv2, spu->number); goto out; out_free_irqs: spu_free_irqs(spu); -out_unlock: - mutex_unlock(&spu_mutex); -out_unmap: - spu_unmap(spu); +out_destroy: + spu_destroy_spu(spu); out_free: kfree(spu); out: @@ -922,11 +638,9 @@ static void destroy_spu(struct spu *spu) list_del_init(&spu->list); list_del_init(&spu->full_list); - of_node_put(spu->devnode); - spu_destroy_sysdev(spu); spu_free_irqs(spu); - spu_unmap(spu); + spu_destroy_spu(spu); kfree(spu); } @@ -947,7 +661,6 @@ module_exit(cleanup_spu_base); static int __init init_spu_base(void) { - struct device_node *node; int i, ret; /* create sysdev class for spus */ @@ -958,16 +671,13 @@ static int __init init_spu_base(void) for (i = 0; i < MAX_NUMNODES; i++) INIT_LIST_HEAD(&spu_list[i]); - ret = -ENODEV; - for (node = of_find_node_by_type(NULL, "spe"); - node; node = of_find_node_by_type(node, "spe")) { - ret = create_spu(node); - if (ret) { - printk(KERN_WARNING "%s: Error initializing %s\n", - __FUNCTION__, node->name); - cleanup_spu_base(); - break; - } + ret = spu_enumerate_spus(create_spu); + + if (ret) { + printk(KERN_WARNING "%s: Error initializing spus\n", + __FUNCTION__); + cleanup_spu_base(); + return ret; } xmon_register_spus(&spu_full_list); diff --git a/arch/powerpc/platforms/cell/spu_priv1_mmio.c b/arch/powerpc/platforms/cell/spu_priv1_mmio.c index 90011f9aab3..a5de0430c56 100644 --- a/arch/powerpc/platforms/cell/spu_priv1_mmio.c +++ b/arch/powerpc/platforms/cell/spu_priv1_mmio.c @@ -18,120 +18,498 @@ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ +#include +#include #include +#include +#include +#include +#include +#include +#include +#include -#include #include #include +#include +#include #include "interrupt.h" +#include "spu_priv1_mmio.h" + +struct spu_pdata { + int nid; + struct device_node *devnode; + struct spu_priv1 __iomem *priv1; +}; + +static struct spu_pdata *spu_get_pdata(struct spu *spu) +{ + BUG_ON(!spu->pdata); + return spu->pdata; +} + +struct device_node *spu_devnode(struct spu *spu) +{ + return spu_get_pdata(spu)->devnode; +} + +EXPORT_SYMBOL_GPL(spu_devnode); + +static int __init find_spu_node_id(struct device_node *spe) +{ + const unsigned int *id; + struct device_node *cpu; + cpu = spe->parent->parent; + id = get_property(cpu, "node-id", NULL); + return id ? *id : 0; +} + +static int __init cell_spuprop_present(struct spu *spu, struct device_node *spe, + const char *prop) +{ + static DEFINE_MUTEX(add_spumem_mutex); + + const struct address_prop { + unsigned long address; + unsigned int len; + } __attribute__((packed)) *p; + int proplen; + + unsigned long start_pfn, nr_pages; + struct pglist_data *pgdata; + struct zone *zone; + int ret; + + p = get_property(spe, prop, &proplen); + WARN_ON(proplen != sizeof (*p)); + + start_pfn = p->address >> PAGE_SHIFT; + nr_pages = ((unsigned long)p->len + PAGE_SIZE - 1) >> PAGE_SHIFT; + + pgdata = NODE_DATA(spu_get_pdata(spu)->nid); + zone = pgdata->node_zones; + + /* XXX rethink locking here */ + mutex_lock(&add_spumem_mutex); + ret = __add_pages(zone, start_pfn, nr_pages); + mutex_unlock(&add_spumem_mutex); + + return ret; +} + +static void __iomem * __init map_spe_prop(struct spu *spu, + struct device_node *n, const char *name) +{ + const struct address_prop { + unsigned long address; + unsigned int len; + } __attribute__((packed)) *prop; + + const void *p; + int proplen; + void __iomem *ret = NULL; + int err = 0; + + p = get_property(n, name, &proplen); + if (proplen != sizeof (struct address_prop)) + return NULL; + + prop = p; + + err = cell_spuprop_present(spu, n, name); + if (err && (err != -EEXIST)) + goto out; + + ret = ioremap(prop->address, prop->len); + + out: + return ret; +} + +static void spu_unmap(struct spu *spu) +{ + iounmap(spu->priv2); + iounmap(spu_get_pdata(spu)->priv1); + iounmap(spu->problem); + iounmap((__force u8 __iomem *)spu->local_store); +} + +static int __init spu_map_interrupts_old(struct spu *spu, + struct device_node *np) +{ + unsigned int isrc; + const u32 *tmp; + + /* Get the interrupt source unit from the device-tree */ + tmp = get_property(np, "isrc", NULL); + if (!tmp) + return -ENODEV; + isrc = tmp[0]; + + /* Add the node number */ + isrc |= spu->node << IIC_IRQ_NODE_SHIFT; + + /* Now map interrupts of all 3 classes */ + spu->irqs[0] = irq_create_mapping(NULL, IIC_IRQ_CLASS_0 | isrc); + spu->irqs[1] = irq_create_mapping(NULL, IIC_IRQ_CLASS_1 | isrc); + spu->irqs[2] = irq_create_mapping(NULL, IIC_IRQ_CLASS_2 | isrc); + + /* Right now, we only fail if class 2 failed */ + return spu->irqs[2] == NO_IRQ ? -EINVAL : 0; +} + +static int __init spu_map_device_old(struct spu *spu, struct device_node *node) +{ + const char *prop; + int ret; + + ret = -ENODEV; + spu->name = get_property(node, "name", NULL); + if (!spu->name) + goto out; + + prop = get_property(node, "local-store", NULL); + if (!prop) + goto out; + spu->local_store_phys = *(unsigned long *)prop; + + /* we use local store as ram, not io memory */ + spu->local_store = (void __force *) + map_spe_prop(spu, node, "local-store"); + if (!spu->local_store) + goto out; + + prop = get_property(node, "problem", NULL); + if (!prop) + goto out_unmap; + spu->problem_phys = *(unsigned long *)prop; + + spu->problem= map_spe_prop(spu, node, "problem"); + if (!spu->problem) + goto out_unmap; + + spu_get_pdata(spu)->priv1= map_spe_prop(spu, node, "priv1"); + + spu->priv2= map_spe_prop(spu, node, "priv2"); + if (!spu->priv2) + goto out_unmap; + ret = 0; + goto out; + +out_unmap: + spu_unmap(spu); +out: + return ret; +} + +static int __init spu_map_interrupts(struct spu *spu, struct device_node *np) +{ + struct of_irq oirq; + int ret; + int i; + + for (i=0; i < 3; i++) { + ret = of_irq_map_one(np, i, &oirq); + if (ret) { + pr_debug("spu_new: failed to get irq %d\n", i); + goto err; + } + ret = -EINVAL; + pr_debug(" irq %d no 0x%x on %s\n", i, oirq.specifier[0], + oirq.controller->full_name); + spu->irqs[i] = irq_create_of_mapping(oirq.controller, + oirq.specifier, oirq.size); + if (spu->irqs[i] == NO_IRQ) { + pr_debug("spu_new: failed to map it !\n"); + goto err; + } + } + return 0; + +err: + pr_debug("failed to map irq %x for spu %s\n", *oirq.specifier, + spu->name); + for (; i >= 0; i--) { + if (spu->irqs[i] != NO_IRQ) + irq_dispose_mapping(spu->irqs[i]); + } + return ret; +} + +static int spu_map_resource(struct device_node *node, int nr, + void __iomem** virt, unsigned long *phys) +{ + struct resource resource = { }; + int ret; + + ret = of_address_to_resource(node, nr, &resource); + if (ret) + goto out; + + if (phys) + *phys = resource.start; + *virt = ioremap(resource.start, resource.end - resource.start); + if (!*virt) + ret = -EINVAL; + +out: + return ret; +} + +static int __init spu_map_device(struct spu *spu, struct device_node *node) +{ + int ret = -ENODEV; + spu->name = get_property(node, "name", NULL); + if (!spu->name) + goto out; + + ret = spu_map_resource(node, 0, (void __iomem**)&spu->local_store, + &spu->local_store_phys); + if (ret) { + pr_debug("spu_new: failed to map %s resource 0\n", + node->full_name); + goto out; + } + ret = spu_map_resource(node, 1, (void __iomem**)&spu->problem, + &spu->problem_phys); + if (ret) { + pr_debug("spu_new: failed to map %s resource 1\n", + node->full_name); + goto out_unmap; + } + ret = spu_map_resource(node, 2, (void __iomem**)&spu->priv2, + NULL); + if (ret) { + pr_debug("spu_new: failed to map %s resource 2\n", + node->full_name); + goto out_unmap; + } + if (!firmware_has_feature(FW_FEATURE_LPAR)) + ret = spu_map_resource(node, 3, + (void __iomem**)&spu_get_pdata(spu)->priv1, NULL); + if (ret) { + pr_debug("spu_new: failed to map %s resource 3\n", + node->full_name); + goto out_unmap; + } + pr_debug("spu_new: %s maps:\n", node->full_name); + pr_debug(" local store : 0x%016lx -> 0x%p\n", + spu->local_store_phys, spu->local_store); + pr_debug(" problem state : 0x%016lx -> 0x%p\n", + spu->problem_phys, spu->problem); + pr_debug(" priv2 : 0x%p\n", spu->priv2); + pr_debug(" priv1 : 0x%p\n", + spu_get_pdata(spu)->priv1); + + return 0; + +out_unmap: + spu_unmap(spu); +out: + pr_debug("failed to map spe %s: %d\n", spu->name, ret); + return ret; +} + +static int __init of_enumerate_spus(int (*fn)(void *data)) +{ + int ret; + struct device_node *node; + + ret = -ENODEV; + for (node = of_find_node_by_type(NULL, "spe"); + node; node = of_find_node_by_type(node, "spe")) { + ret = fn(node); + if (ret) { + printk(KERN_WARNING "%s: Error initializing %s\n", + __FUNCTION__, node->name); + break; + } + } + return ret; +} + +static int __init of_create_spu(struct spu *spu, void *data) +{ + int ret; + struct device_node *spe = (struct device_node *)data; + + spu->pdata = kzalloc(sizeof(struct spu_pdata), + GFP_KERNEL); + if (!spu->pdata) { + ret = -ENOMEM; + goto out; + } + + spu->node = find_spu_node_id(spe); + if (spu->node >= MAX_NUMNODES) { + printk(KERN_WARNING "SPE %s on node %d ignored," + " node number too big\n", spe->full_name, spu->node); + printk(KERN_WARNING "Check if CONFIG_NUMA is enabled.\n"); + ret = -ENODEV; + goto out_free; + } + + spu_get_pdata(spu)->nid = of_node_to_nid(spe); + if (spu_get_pdata(spu)->nid == -1) + spu_get_pdata(spu)->nid = 0; + + ret = spu_map_device(spu, spe); + /* try old method */ + if (ret) + ret = spu_map_device_old(spu, spe); + if (ret) + goto out_free; + + ret = spu_map_interrupts(spu, spe); + if (ret) + ret = spu_map_interrupts_old(spu, spe); + if (ret) + goto out_unmap; + + spu_get_pdata(spu)->devnode = of_node_get(spe); + + pr_debug(KERN_DEBUG "Using SPE %s %p %p %p %p %d\n", spu->name, + spu->local_store, spu->problem, spu_get_pdata(spu)->priv1, + spu->priv2, spu->number); + goto out; + +out_unmap: + spu_unmap(spu); +out_free: + kfree(spu->pdata); + spu->pdata = NULL; +out: + return ret; +} + +static int of_destroy_spu(struct spu *spu) +{ + spu_unmap(spu); + of_node_put(spu_get_pdata(spu)->devnode); + kfree(spu->pdata); + spu->pdata = NULL; + return 0; +} + +const struct spu_management_ops spu_management_of_ops = { + .enumerate_spus = of_enumerate_spus, + .create_spu = of_create_spu, + .destroy_spu = of_destroy_spu, +}; static void int_mask_and(struct spu *spu, int class, u64 mask) { u64 old_mask; - old_mask = in_be64(&spu->priv1->int_mask_RW[class]); - out_be64(&spu->priv1->int_mask_RW[class], old_mask & mask); + old_mask = in_be64(&spu_get_pdata(spu)->priv1->int_mask_RW[class]); + out_be64(&spu_get_pdata(spu)->priv1->int_mask_RW[class], + old_mask & mask); } static void int_mask_or(struct spu *spu, int class, u64 mask) { u64 old_mask; - old_mask = in_be64(&spu->priv1->int_mask_RW[class]); - out_be64(&spu->priv1->int_mask_RW[class], old_mask | mask); + old_mask = in_be64(&spu_get_pdata(spu)->priv1->int_mask_RW[class]); + out_be64(&spu_get_pdata(spu)->priv1->int_mask_RW[class], + old_mask | mask); } static void int_mask_set(struct spu *spu, int class, u64 mask) { - out_be64(&spu->priv1->int_mask_RW[class], mask); + out_be64(&spu_get_pdata(spu)->priv1->int_mask_RW[class], mask); } static u64 int_mask_get(struct spu *spu, int class) { - return in_be64(&spu->priv1->int_mask_RW[class]); + return in_be64(&spu_get_pdata(spu)->priv1->int_mask_RW[class]); } static void int_stat_clear(struct spu *spu, int class, u64 stat) { - out_be64(&spu->priv1->int_stat_RW[class], stat); + out_be64(&spu_get_pdata(spu)->priv1->int_stat_RW[class], stat); } static u64 int_stat_get(struct spu *spu, int class) { - return in_be64(&spu->priv1->int_stat_RW[class]); + return in_be64(&spu_get_pdata(spu)->priv1->int_stat_RW[class]); } static void cpu_affinity_set(struct spu *spu, int cpu) { u64 target = iic_get_target_id(cpu); u64 route = target << 48 | target << 32 | target << 16; - out_be64(&spu->priv1->int_route_RW, route); + out_be64(&spu_get_pdata(spu)->priv1->int_route_RW, route); } static u64 mfc_dar_get(struct spu *spu) { - return in_be64(&spu->priv1->mfc_dar_RW); + return in_be64(&spu_get_pdata(spu)->priv1->mfc_dar_RW); } static u64 mfc_dsisr_get(struct spu *spu) { - return in_be64(&spu->priv1->mfc_dsisr_RW); + return in_be64(&spu_get_pdata(spu)->priv1->mfc_dsisr_RW); } static void mfc_dsisr_set(struct spu *spu, u64 dsisr) { - out_be64(&spu->priv1->mfc_dsisr_RW, dsisr); + out_be64(&spu_get_pdata(spu)->priv1->mfc_dsisr_RW, dsisr); } static void mfc_sdr_setup(struct spu *spu) { - out_be64(&spu->priv1->mfc_sdr_RW, mfspr(SPRN_SDR1)); + out_be64(&spu_get_pdata(spu)->priv1->mfc_sdr_RW, mfspr(SPRN_SDR1)); } static void mfc_sr1_set(struct spu *spu, u64 sr1) { - out_be64(&spu->priv1->mfc_sr1_RW, sr1); + out_be64(&spu_get_pdata(spu)->priv1->mfc_sr1_RW, sr1); } static u64 mfc_sr1_get(struct spu *spu) { - return in_be64(&spu->priv1->mfc_sr1_RW); + return in_be64(&spu_get_pdata(spu)->priv1->mfc_sr1_RW); } static void mfc_tclass_id_set(struct spu *spu, u64 tclass_id) { - out_be64(&spu->priv1->mfc_tclass_id_RW, tclass_id); + out_be64(&spu_get_pdata(spu)->priv1->mfc_tclass_id_RW, tclass_id); } static u64 mfc_tclass_id_get(struct spu *spu) { - return in_be64(&spu->priv1->mfc_tclass_id_RW); + return in_be64(&spu_get_pdata(spu)->priv1->mfc_tclass_id_RW); } static void tlb_invalidate(struct spu *spu) { - out_be64(&spu->priv1->tlb_invalidate_entry_W, 0ul); + out_be64(&spu_get_pdata(spu)->priv1->tlb_invalidate_entry_W, 0ul); } static void resource_allocation_groupID_set(struct spu *spu, u64 id) { - out_be64(&spu->priv1->resource_allocation_groupID_RW, id); + out_be64(&spu_get_pdata(spu)->priv1->resource_allocation_groupID_RW, + id); } static u64 resource_allocation_groupID_get(struct spu *spu) { - return in_be64(&spu->priv1->resource_allocation_groupID_RW); + return in_be64( + &spu_get_pdata(spu)->priv1->resource_allocation_groupID_RW); } static void resource_allocation_enable_set(struct spu *spu, u64 enable) { - out_be64(&spu->priv1->resource_allocation_enable_RW, enable); + out_be64(&spu_get_pdata(spu)->priv1->resource_allocation_enable_RW, + enable); } static u64 resource_allocation_enable_get(struct spu *spu) { - return in_be64(&spu->priv1->resource_allocation_enable_RW); + return in_be64( + &spu_get_pdata(spu)->priv1->resource_allocation_enable_RW); } const struct spu_priv1_ops spu_priv1_mmio_ops = diff --git a/arch/powerpc/platforms/cell/spu_priv1_mmio.h b/arch/powerpc/platforms/cell/spu_priv1_mmio.h new file mode 100644 index 00000000000..7b62bd1cc25 --- /dev/null +++ b/arch/powerpc/platforms/cell/spu_priv1_mmio.h @@ -0,0 +1,26 @@ +/* + * spu hypervisor abstraction for direct hardware access. + * + * Copyright (C) 2006 Sony Computer Entertainment Inc. + * Copyright 2006 Sony Corp. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef SPU_PRIV1_MMIO_H +#define SPU_PRIV1_MMIO_H + +struct device_node *spu_devnode(struct spu *spu); + +#endif /* SPU_PRIV1_MMIO_H */ diff --git a/include/asm-powerpc/spu.h b/include/asm-powerpc/spu.h index f968f869753..fdad4267b44 100644 --- a/include/asm-powerpc/spu.h +++ b/include/asm-powerpc/spu.h @@ -111,13 +111,11 @@ struct spu { u8 *local_store; unsigned long problem_phys; struct spu_problem __iomem *problem; - struct spu_priv1 __iomem *priv1; struct spu_priv2 __iomem *priv2; struct list_head list; struct list_head sched_list; struct list_head full_list; int number; - int nid; unsigned int irqs[3]; u32 node; u64 flags; @@ -144,8 +142,7 @@ struct spu { char irq_c1[8]; char irq_c2[8]; - struct device_node *devnode; - + void* pdata; /* platform private data */ struct sys_device sysdev; }; diff --git a/include/asm-powerpc/spu_priv1.h b/include/asm-powerpc/spu_priv1.h index 4f9a04db99f..69dcb0c5388 100644 --- a/include/asm-powerpc/spu_priv1.h +++ b/include/asm-powerpc/spu_priv1.h @@ -21,12 +21,13 @@ #define _SPU_PRIV1_H #if defined(__KERNEL__) +#include + struct spu; /* access to priv1 registers */ -struct spu_priv1_ops -{ +struct spu_priv1_ops { void (*int_mask_and) (struct spu *spu, int class, u64 mask); void (*int_mask_or) (struct spu *spu, int class, u64 mask); void (*int_mask_set) (struct spu *spu, int class, u64 mask); @@ -171,12 +172,41 @@ spu_resource_allocation_enable_get (struct spu *spu) return spu_priv1_ops->resource_allocation_enable_get(spu); } -/* The declarations folowing are put here for convenience - * and only intended to be used by the platform setup code - * for initializing spu_priv1_ops. +/* spu management abstraction */ + +struct spu_management_ops { + int (*enumerate_spus)(int (*fn)(void *data)); + int (*create_spu)(struct spu *spu, void *data); + int (*destroy_spu)(struct spu *spu); +}; + +extern const struct spu_management_ops* spu_management_ops; + +static inline int +spu_enumerate_spus (int (*fn)(void *data)) +{ + return spu_management_ops->enumerate_spus(fn); +} + +static inline int +spu_create_spu (struct spu *spu, void *data) +{ + return spu_management_ops->create_spu(spu, data); +} + +static inline int +spu_destroy_spu (struct spu *spu) +{ + return spu_management_ops->destroy_spu(spu); +} + +/* + * The declarations folowing are put here for convenience + * and only intended to be used by the platform setup code. */ extern const struct spu_priv1_ops spu_priv1_mmio_ops; +extern const struct spu_management_ops spu_management_of_ops; #endif /* __KERNEL__ */ #endif -- cgit v1.2.3-70-g09d2 From a985239bdf017e00e985c3a31149d6ae128fdc5f Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Thu, 23 Nov 2006 00:46:50 +0100 Subject: [POWERPC] cell: spu management xmon routines This fixes the xmon support for the cell spu to be compatable with the split spu platform code. Signed-off-by: Geoff Levand Signed-off-by: Michael Ellerman Signed-off-by: Arnd Bergmann --- arch/powerpc/xmon/xmon.c | 10 +--------- 1 file changed, 1 insertion(+), 9 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/xmon/xmon.c b/arch/powerpc/xmon/xmon.c index c999638cc2d..1cf90c8ac34 100644 --- a/arch/powerpc/xmon/xmon.c +++ b/arch/powerpc/xmon/xmon.c @@ -2789,8 +2789,6 @@ static void dump_spu_fields(struct spu *spu) DUMP_FIELD(spu, "0x%x", number); DUMP_FIELD(spu, "%s", name); - DUMP_FIELD(spu, "%s", devnode->full_name); - DUMP_FIELD(spu, "0x%x", nid); DUMP_FIELD(spu, "0x%lx", local_store_phys); DUMP_FIELD(spu, "0x%p", local_store); DUMP_FIELD(spu, "0x%lx", ls_size); @@ -2817,14 +2815,8 @@ static void dump_spu_fields(struct spu *spu) in_be32(&spu->problem->spu_status_R)); DUMP_VALUE("0x%x", problem->spu_npc_RW, in_be32(&spu->problem->spu_npc_RW)); - DUMP_FIELD(spu, "0x%p", priv1); - - if (spu->priv1) { - DUMP_VALUE("0x%lx", priv1->mfc_sr1_RW, - in_be64(&spu->priv1->mfc_sr1_RW)); - } - DUMP_FIELD(spu, "0x%p", priv2); + DUMP_FIELD(spu, "0x%p", pdata); } int -- cgit v1.2.3-70-g09d2 From f58a9d171a346afb1b09190427e6c28c6118703e Mon Sep 17 00:00:00 2001 From: Geoff Levand Date: Thu, 23 Nov 2006 00:46:51 +0100 Subject: [POWERPC] ps3: add support for ps3 platform Adds the core platform support for the PS3 game console and other devices using the PS3 hypervisor. Signed-off-by: Geoff Levand Signed-off-by: Arnd Bergmann --- MAINTAINERS | 7 + arch/powerpc/Kconfig | 11 +- arch/powerpc/platforms/Makefile | 1 + arch/powerpc/platforms/ps3/Kconfig | 32 ++ arch/powerpc/platforms/ps3/Makefile | 2 + arch/powerpc/platforms/ps3/mm.c | 827 ++++++++++++++++++++++++++++++++++ arch/powerpc/platforms/ps3/platform.h | 60 +++ arch/powerpc/platforms/ps3/setup.c | 173 +++++++ arch/powerpc/platforms/ps3/smp.c | 158 +++++++ arch/powerpc/platforms/ps3/time.c | 104 +++++ include/asm-powerpc/ps3.h | 250 ++++++++++ 11 files changed, 1624 insertions(+), 1 deletion(-) create mode 100644 arch/powerpc/platforms/ps3/Kconfig create mode 100644 arch/powerpc/platforms/ps3/Makefile create mode 100644 arch/powerpc/platforms/ps3/mm.c create mode 100644 arch/powerpc/platforms/ps3/platform.h create mode 100644 arch/powerpc/platforms/ps3/setup.c create mode 100644 arch/powerpc/platforms/ps3/smp.c create mode 100644 arch/powerpc/platforms/ps3/time.c create mode 100644 include/asm-powerpc/ps3.h (limited to 'arch/powerpc') diff --git a/MAINTAINERS b/MAINTAINERS index 45df5d4e2ab..fd3b2ca0c03 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2443,6 +2443,13 @@ M: promise@pnd-pc.demon.co.uk W: http://www.pnd-pc.demon.co.uk/promise/ S: Maintained +PS3 PLATFORM SUPPORT +P: Geoff Levand +M: geoffrey.levand@am.sony.com +L: linuxppc-dev@ozlabs.org +L: cbe-oss-dev@ozlabs.org +S: Supported + PVRUSB2 VIDEO4LINUX DRIVER P: Mike Isely M: isely@pobox.com diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index b4a3b699433..c0146a40c6f 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -495,6 +495,14 @@ config UDBG_RTAS_CONSOLE depends on PPC_RTAS default n +config PPC_PS3 + bool "Sony PS3" + depends on PPC_MULTIPLATFORM && PPC64 + select PPC_CELL + help + This option enables support for the Sony PS3 game console + and other platforms using the PS3 hypervisor. + config XICS depends on PPC_PSERIES bool @@ -647,6 +655,7 @@ source arch/powerpc/platforms/85xx/Kconfig source arch/powerpc/platforms/86xx/Kconfig source arch/powerpc/platforms/8xx/Kconfig source arch/powerpc/platforms/cell/Kconfig +source arch/powerpc/platforms/ps3/Kconfig menu "Kernel options" @@ -917,7 +926,7 @@ config MCA config PCI bool "PCI support" if 40x || CPM2 || PPC_83xx || PPC_85xx || PPC_86xx \ - || PPC_MPC52xx || (EMBEDDED && PPC_ISERIES) || MPC7448HPC2 + || PPC_MPC52xx || (EMBEDDED && PPC_ISERIES) || MPC7448HPC2 || PPC_PS3 default y if !40x && !CPM2 && !8xx && !APUS && !PPC_83xx \ && !PPC_85xx && !PPC_86xx default PCI_PERMEDIA if !4xx && !CPM2 && !8xx && APUS diff --git a/arch/powerpc/platforms/Makefile b/arch/powerpc/platforms/Makefile index 7ad2673d0aa..56caf4fbd73 100644 --- a/arch/powerpc/platforms/Makefile +++ b/arch/powerpc/platforms/Makefile @@ -16,4 +16,5 @@ obj-$(CONFIG_PPC_ISERIES) += iseries/ obj-$(CONFIG_PPC_MAPLE) += maple/ obj-$(CONFIG_PPC_PASEMI) += pasemi/ obj-$(CONFIG_PPC_CELL) += cell/ +obj-$(CONFIG_PS3) += ps3/ obj-$(CONFIG_EMBEDDED6xx) += embedded6xx/ diff --git a/arch/powerpc/platforms/ps3/Kconfig b/arch/powerpc/platforms/ps3/Kconfig new file mode 100644 index 00000000000..f023719f645 --- /dev/null +++ b/arch/powerpc/platforms/ps3/Kconfig @@ -0,0 +1,32 @@ +menu "PS3 Platform Options" + depends on PPC_PS3 + +config PS3_HTAB_SIZE + depends on PPC_PS3 + int "PS3 Platform pagetable size" + range 18 20 + default 20 + help + This option is only for experts who may have the desire to fine + tune the pagetable size on their system. The value here is + expressed as the log2 of the page table size. Valid values are + 18, 19, and 20, corresponding to 256KB, 512KB and 1MB respectively. + + If unsure, choose the default (20) with the confidence that your + system will have optimal runtime performance. + +config PS3_DYNAMIC_DMA + depends on PPC_PS3 && EXPERIMENTAL + bool "PS3 Platform dynamic DMA page table management" + default n + help + This option will enable kernel support to take advantage of the + per device dynamic DMA page table management provided by the Cell + processor's IO Controller. This support incurs some runtime + overhead and also slightly increases kernel memory usage. The + current implementation should be considered experimental. + + This support is mainly for Linux kernel development. If unsure, + say N. + +endmenu diff --git a/arch/powerpc/platforms/ps3/Makefile b/arch/powerpc/platforms/ps3/Makefile new file mode 100644 index 00000000000..8d6c72c6ea7 --- /dev/null +++ b/arch/powerpc/platforms/ps3/Makefile @@ -0,0 +1,2 @@ +obj-y += setup.o mm.o smp.o time.o hvcall.o htab.o repository.o +obj-y += interrupt.o exports.o diff --git a/arch/powerpc/platforms/ps3/mm.c b/arch/powerpc/platforms/ps3/mm.c new file mode 100644 index 00000000000..a57f7036dd1 --- /dev/null +++ b/arch/powerpc/platforms/ps3/mm.c @@ -0,0 +1,827 @@ +/* + * PS3 address space management. + * + * Copyright (C) 2006 Sony Computer Entertainment Inc. + * Copyright 2006 Sony Corp. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include +#include +#include + +#include +#include +#include +#include + +#include "platform.h" + +#if defined(DEBUG) +#define DBG(fmt...) udbg_printf(fmt) +#else +#define DBG(fmt...) do{if(0)printk(fmt);}while(0) +#endif + +enum { +#if defined(CONFIG_PS3_USE_LPAR_ADDR) + USE_LPAR_ADDR = 1, +#else + USE_LPAR_ADDR = 0, +#endif +#if defined(CONFIG_PS3_DYNAMIC_DMA) + USE_DYNAMIC_DMA = 1, +#else + USE_DYNAMIC_DMA = 0, +#endif +}; + +enum { + PAGE_SHIFT_4K = 12U, + PAGE_SHIFT_64K = 16U, + PAGE_SHIFT_16M = 24U, +}; + +static unsigned long make_page_sizes(unsigned long a, unsigned long b) +{ + return (a << 56) | (b << 48); +} + +enum { + ALLOCATE_MEMORY_TRY_ALT_UNIT = 0X04, + ALLOCATE_MEMORY_ADDR_ZERO = 0X08, +}; + +/* valid htab sizes are {18,19,20} = 256K, 512K, 1M */ + +enum { + HTAB_SIZE_MAX = 20U, /* HV limit of 1MB */ + HTAB_SIZE_MIN = 18U, /* CPU limit of 256KB */ +}; + +/*============================================================================*/ +/* virtual address space routines */ +/*============================================================================*/ + +/** + * struct mem_region - memory region structure + * @base: base address + * @size: size in bytes + * @offset: difference between base and rm.size + */ + +struct mem_region { + unsigned long base; + unsigned long size; + unsigned long offset; +}; + +/** + * struct map - address space state variables holder + * @total: total memory available as reported by HV + * @vas_id - HV virtual address space id + * @htab_size: htab size in bytes + * + * The HV virtual address space (vas) allows for hotplug memory regions. + * Memory regions can be created and destroyed in the vas at runtime. + * @rm: real mode (bootmem) region + * @r1: hotplug memory region(s) + * + * ps3 addresses + * virt_addr: a cpu 'translated' effective address + * phys_addr: an address in what Linux thinks is the physical address space + * lpar_addr: an address in the HV virtual address space + * bus_addr: an io controller 'translated' address on a device bus + */ + +struct map { + unsigned long total; + unsigned long vas_id; + unsigned long htab_size; + struct mem_region rm; + struct mem_region r1; +}; + +#define debug_dump_map(x) _debug_dump_map(x, __func__, __LINE__) +static void _debug_dump_map(const struct map* m, const char* func, int line) +{ + DBG("%s:%d: map.total = %lxh\n", func, line, m->total); + DBG("%s:%d: map.rm.size = %lxh\n", func, line, m->rm.size); + DBG("%s:%d: map.vas_id = %lu\n", func, line, m->vas_id); + DBG("%s:%d: map.htab_size = %lxh\n", func, line, m->htab_size); + DBG("%s:%d: map.r1.base = %lxh\n", func, line, m->r1.base); + DBG("%s:%d: map.r1.offset = %lxh\n", func, line, m->r1.offset); + DBG("%s:%d: map.r1.size = %lxh\n", func, line, m->r1.size); +} + +static struct map map; + +/** + * ps3_mm_phys_to_lpar - translate a linux physical address to lpar address + * @phys_addr: linux physical address + */ + +unsigned long ps3_mm_phys_to_lpar(unsigned long phys_addr) +{ + BUG_ON(is_kernel_addr(phys_addr)); + if (USE_LPAR_ADDR) + return phys_addr; + else + return (phys_addr < map.rm.size || phys_addr >= map.total) + ? phys_addr : phys_addr + map.r1.offset; +} + +EXPORT_SYMBOL(ps3_mm_phys_to_lpar); + +/** + * ps3_mm_vas_create - create the virtual address space + */ + +void __init ps3_mm_vas_create(unsigned long* htab_size) +{ + int result; + unsigned long start_address; + unsigned long size; + unsigned long access_right; + unsigned long max_page_size; + unsigned long flags; + + result = lv1_query_logical_partition_address_region_info(0, + &start_address, &size, &access_right, &max_page_size, + &flags); + + if (result) { + DBG("%s:%d: lv1_query_logical_partition_address_region_info " + "failed: %s\n", __func__, __LINE__, + ps3_result(result)); + goto fail; + } + + if (max_page_size < PAGE_SHIFT_16M) { + DBG("%s:%d: bad max_page_size %lxh\n", __func__, __LINE__, + max_page_size); + goto fail; + } + + BUILD_BUG_ON(CONFIG_PS3_HTAB_SIZE > HTAB_SIZE_MAX); + BUILD_BUG_ON(CONFIG_PS3_HTAB_SIZE < HTAB_SIZE_MIN); + + result = lv1_construct_virtual_address_space(CONFIG_PS3_HTAB_SIZE, + 2, make_page_sizes(PAGE_SHIFT_16M, PAGE_SHIFT_64K), + &map.vas_id, &map.htab_size); + + if (result) { + DBG("%s:%d: lv1_construct_virtual_address_space failed: %s\n", + __func__, __LINE__, ps3_result(result)); + goto fail; + } + + result = lv1_select_virtual_address_space(map.vas_id); + + if (result) { + DBG("%s:%d: lv1_select_virtual_address_space failed: %s\n", + __func__, __LINE__, ps3_result(result)); + goto fail; + } + + *htab_size = map.htab_size; + + debug_dump_map(&map); + + return; + +fail: + panic("ps3_mm_vas_create failed"); +} + +/** + * ps3_mm_vas_destroy - + */ + +void ps3_mm_vas_destroy(void) +{ + if (map.vas_id) { + lv1_select_virtual_address_space(0); + lv1_destruct_virtual_address_space(map.vas_id); + map.vas_id = 0; + } +} + +/*============================================================================*/ +/* memory hotplug routines */ +/*============================================================================*/ + +/** + * ps3_mm_region_create - create a memory region in the vas + * @r: pointer to a struct mem_region to accept initialized values + * @size: requested region size + * + * This implementation creates the region with the vas large page size. + * @size is rounded down to a multiple of the vas large page size. + */ + +int ps3_mm_region_create(struct mem_region *r, unsigned long size) +{ + int result; + unsigned long muid; + + r->size = _ALIGN_DOWN(size, 1 << PAGE_SHIFT_16M); + + DBG("%s:%d requested %lxh\n", __func__, __LINE__, size); + DBG("%s:%d actual %lxh\n", __func__, __LINE__, r->size); + DBG("%s:%d difference %lxh (%luMB)\n", __func__, __LINE__, + (unsigned long)(size - r->size), + (size - r->size) / 1024 / 1024); + + if (r->size == 0) { + DBG("%s:%d: size == 0\n", __func__, __LINE__); + result = -1; + goto zero_region; + } + + result = lv1_allocate_memory(r->size, PAGE_SHIFT_16M, 0, + ALLOCATE_MEMORY_TRY_ALT_UNIT, &r->base, &muid); + + if (result || r->base < map.rm.size) { + DBG("%s:%d: lv1_allocate_memory failed: %s\n", + __func__, __LINE__, ps3_result(result)); + goto zero_region; + } + + r->offset = r->base - map.rm.size; + return result; + +zero_region: + r->size = r->base = r->offset = 0; + return result; +} + +/** + * ps3_mm_region_destroy - destroy a memory region + * @r: pointer to struct mem_region + */ + +void ps3_mm_region_destroy(struct mem_region *r) +{ + if (r->base) { + lv1_release_memory(r->base); + r->size = r->base = r->offset = 0; + map.total = map.rm.size; + } +} + +/** + * ps3_mm_add_memory - hot add memory + */ + +static int __init ps3_mm_add_memory(void) +{ + int result; + unsigned long start_addr; + unsigned long start_pfn; + unsigned long nr_pages; + + BUG_ON(!mem_init_done); + + start_addr = USE_LPAR_ADDR ? map.r1.base : map.rm.size; + start_pfn = start_addr >> PAGE_SHIFT; + nr_pages = (map.r1.size + PAGE_SIZE - 1) >> PAGE_SHIFT; + + DBG("%s:%d: start_addr %lxh, start_pfn %lxh, nr_pages %lxh\n", + __func__, __LINE__, start_addr, start_pfn, nr_pages); + + result = add_memory(0, start_addr, map.r1.size); + + if (result) { + DBG("%s:%d: add_memory failed: (%d)\n", + __func__, __LINE__, result); + return result; + } + + result = online_pages(start_pfn, nr_pages); + + if (result) + DBG("%s:%d: online_pages failed: (%d)\n", + __func__, __LINE__, result); + + return result; +} + +core_initcall(ps3_mm_add_memory); + +/*============================================================================*/ +/* dma routines */ +/*============================================================================*/ + +/** + * dma_lpar_to_bus - Translate an lpar address to ioc mapped bus address. + * @r: pointer to dma region structure + * @lpar_addr: HV lpar address + */ + +static unsigned long dma_lpar_to_bus(struct ps3_dma_region *r, + unsigned long lpar_addr) +{ + BUG_ON(lpar_addr >= map.r1.base + map.r1.size); + return r->bus_addr + (lpar_addr <= map.rm.size ? lpar_addr + : lpar_addr - map.r1.offset); +} + +#define dma_dump_region(_a) _dma_dump_region(_a, __func__, __LINE__) +static void _dma_dump_region(const struct ps3_dma_region *r, const char* func, + int line) +{ + DBG("%s:%d: dev %u:%u\n", func, line, r->did.bus_id, + r->did.dev_id); + DBG("%s:%d: page_size %u\n", func, line, r->page_size); + DBG("%s:%d: bus_addr %lxh\n", func, line, r->bus_addr); + DBG("%s:%d: len %lxh\n", func, line, r->len); +} + +/** + * dma_chunk - A chunk of dma pages mapped by the io controller. + * @region - The dma region that owns this chunk. + * @lpar_addr: Starting lpar address of the area to map. + * @bus_addr: Starting ioc bus address of the area to map. + * @len: Length in bytes of the area to map. + * @link: A struct list_head used with struct ps3_dma_region.chunk_list, the + * list of all chuncks owned by the region. + * + * This implementation uses a very simple dma page manager + * based on the dma_chunk structure. This scheme assumes + * that all drivers use very well behaved dma ops. + */ + +struct dma_chunk { + struct ps3_dma_region *region; + unsigned long lpar_addr; + unsigned long bus_addr; + unsigned long len; + struct list_head link; + unsigned int usage_count; +}; + +#define dma_dump_chunk(_a) _dma_dump_chunk(_a, __func__, __LINE__) +static void _dma_dump_chunk (const struct dma_chunk* c, const char* func, + int line) +{ + DBG("%s:%d: r.dev %u:%u\n", func, line, + c->region->did.bus_id, c->region->did.dev_id); + DBG("%s:%d: r.bus_addr %lxh\n", func, line, c->region->bus_addr); + DBG("%s:%d: r.page_size %u\n", func, line, c->region->page_size); + DBG("%s:%d: r.len %lxh\n", func, line, c->region->len); + DBG("%s:%d: c.lpar_addr %lxh\n", func, line, c->lpar_addr); + DBG("%s:%d: c.bus_addr %lxh\n", func, line, c->bus_addr); + DBG("%s:%d: c.len %lxh\n", func, line, c->len); +} + +static struct dma_chunk * dma_find_chunk(struct ps3_dma_region *r, + unsigned long bus_addr, unsigned long len) +{ + struct dma_chunk *c; + unsigned long aligned_bus = _ALIGN_DOWN(bus_addr, 1 << r->page_size); + unsigned long aligned_len = _ALIGN_UP(len, 1 << r->page_size); + + list_for_each_entry(c, &r->chunk_list.head, link) { + /* intersection */ + if (aligned_bus >= c->bus_addr + && aligned_bus < c->bus_addr + c->len + && aligned_bus + aligned_len <= c->bus_addr + c->len) { + return c; + } + /* below */ + if (aligned_bus + aligned_len <= c->bus_addr) { + continue; + } + /* above */ + if (aligned_bus >= c->bus_addr + c->len) { + continue; + } + + /* we don't handle the multi-chunk case for now */ + + dma_dump_chunk(c); + BUG(); + } + return NULL; +} + +static int dma_free_chunk(struct dma_chunk *c) +{ + int result = 0; + + if (c->bus_addr) { + result = lv1_unmap_device_dma_region(c->region->did.bus_id, + c->region->did.dev_id, c->bus_addr, c->len); + BUG_ON(result); + } + + kfree(c); + return result; +} + +/** + * dma_map_pages - Maps dma pages into the io controller bus address space. + * @r: Pointer to a struct ps3_dma_region. + * @phys_addr: Starting physical address of the area to map. + * @len: Length in bytes of the area to map. + * c_out: A pointer to receive an allocated struct dma_chunk for this area. + * + * This is the lowest level dma mapping routine, and is the one that will + * make the HV call to add the pages into the io controller address space. + */ + +static int dma_map_pages(struct ps3_dma_region *r, unsigned long phys_addr, + unsigned long len, struct dma_chunk **c_out) +{ + int result; + struct dma_chunk *c; + + c = kzalloc(sizeof(struct dma_chunk), GFP_ATOMIC); + + if (!c) { + result = -ENOMEM; + goto fail_alloc; + } + + c->region = r; + c->lpar_addr = ps3_mm_phys_to_lpar(phys_addr); + c->bus_addr = dma_lpar_to_bus(r, c->lpar_addr); + c->len = len; + + result = lv1_map_device_dma_region(c->region->did.bus_id, + c->region->did.dev_id, c->lpar_addr, c->bus_addr, c->len, + 0xf800000000000000UL); + + if (result) { + DBG("%s:%d: lv1_map_device_dma_region failed: %s\n", + __func__, __LINE__, ps3_result(result)); + goto fail_map; + } + + list_add(&c->link, &r->chunk_list.head); + + *c_out = c; + return 0; + +fail_map: + kfree(c); +fail_alloc: + *c_out = NULL; + DBG(" <- %s:%d\n", __func__, __LINE__); + return result; +} + +/** + * dma_region_create - Create a device dma region. + * @r: Pointer to a struct ps3_dma_region. + * + * This is the lowest level dma region create routine, and is the one that + * will make the HV call to create the region. + */ + +static int dma_region_create(struct ps3_dma_region* r) +{ + int result; + + r->len = _ALIGN_UP(map.total, 1 << r->page_size); + INIT_LIST_HEAD(&r->chunk_list.head); + spin_lock_init(&r->chunk_list.lock); + + result = lv1_allocate_device_dma_region(r->did.bus_id, r->did.dev_id, + r->len, r->page_size, r->region_type, &r->bus_addr); + + dma_dump_region(r); + + if (result) { + DBG("%s:%d: lv1_allocate_device_dma_region failed: %s\n", + __func__, __LINE__, ps3_result(result)); + r->len = r->bus_addr = 0; + } + + return result; +} + +/** + * dma_region_free - Free a device dma region. + * @r: Pointer to a struct ps3_dma_region. + * + * This is the lowest level dma region free routine, and is the one that + * will make the HV call to free the region. + */ + +static int dma_region_free(struct ps3_dma_region* r) +{ + int result; + struct dma_chunk *c; + struct dma_chunk *tmp; + + list_for_each_entry_safe(c, tmp, &r->chunk_list.head, link) { + list_del(&c->link); + dma_free_chunk(c); + } + + result = lv1_free_device_dma_region(r->did.bus_id, r->did.dev_id, + r->bus_addr); + + if (result) + DBG("%s:%d: lv1_free_device_dma_region failed: %s\n", + __func__, __LINE__, ps3_result(result)); + + r->len = r->bus_addr = 0; + + return result; +} + +/** + * dma_map_area - Map an area of memory into a device dma region. + * @r: Pointer to a struct ps3_dma_region. + * @virt_addr: Starting virtual address of the area to map. + * @len: Length in bytes of the area to map. + * @bus_addr: A pointer to return the starting ioc bus address of the area to + * map. + * + * This is the common dma mapping routine. + */ + +static int dma_map_area(struct ps3_dma_region *r, unsigned long virt_addr, + unsigned long len, unsigned long *bus_addr) +{ + int result; + unsigned long flags; + struct dma_chunk *c; + unsigned long phys_addr = is_kernel_addr(virt_addr) ? __pa(virt_addr) + : virt_addr; + + *bus_addr = dma_lpar_to_bus(r, ps3_mm_phys_to_lpar(phys_addr)); + + if (!USE_DYNAMIC_DMA) { + unsigned long lpar_addr = ps3_mm_phys_to_lpar(phys_addr); + DBG(" -> %s:%d\n", __func__, __LINE__); + DBG("%s:%d virt_addr %lxh\n", __func__, __LINE__, + virt_addr); + DBG("%s:%d phys_addr %lxh\n", __func__, __LINE__, + phys_addr); + DBG("%s:%d lpar_addr %lxh\n", __func__, __LINE__, + lpar_addr); + DBG("%s:%d len %lxh\n", __func__, __LINE__, len); + DBG("%s:%d bus_addr %lxh (%lxh)\n", __func__, __LINE__, + *bus_addr, len); + } + + spin_lock_irqsave(&r->chunk_list.lock, flags); + c = dma_find_chunk(r, *bus_addr, len); + + if (c) { + c->usage_count++; + spin_unlock_irqrestore(&r->chunk_list.lock, flags); + return 0; + } + + result = dma_map_pages(r, _ALIGN_DOWN(phys_addr, 1 << r->page_size), + _ALIGN_UP(len, 1 << r->page_size), &c); + + if (result) { + *bus_addr = 0; + DBG("%s:%d: dma_map_pages failed (%d)\n", + __func__, __LINE__, result); + spin_unlock_irqrestore(&r->chunk_list.lock, flags); + return result; + } + + c->usage_count = 1; + + spin_unlock_irqrestore(&r->chunk_list.lock, flags); + return result; +} + +/** + * dma_unmap_area - Unmap an area of memory from a device dma region. + * @r: Pointer to a struct ps3_dma_region. + * @bus_addr: The starting ioc bus address of the area to unmap. + * @len: Length in bytes of the area to unmap. + * + * This is the common dma unmap routine. + */ + +int dma_unmap_area(struct ps3_dma_region *r, unsigned long bus_addr, + unsigned long len) +{ + unsigned long flags; + struct dma_chunk *c; + + spin_lock_irqsave(&r->chunk_list.lock, flags); + c = dma_find_chunk(r, bus_addr, len); + + if (!c) { + unsigned long aligned_bus = _ALIGN_DOWN(bus_addr, + 1 << r->page_size); + unsigned long aligned_len = _ALIGN_UP(len, 1 << r->page_size); + DBG("%s:%d: not found: bus_addr %lxh\n", + __func__, __LINE__, bus_addr); + DBG("%s:%d: not found: len %lxh\n", + __func__, __LINE__, len); + DBG("%s:%d: not found: aligned_bus %lxh\n", + __func__, __LINE__, aligned_bus); + DBG("%s:%d: not found: aligned_len %lxh\n", + __func__, __LINE__, aligned_len); + BUG(); + } + + c->usage_count--; + + if (!c->usage_count) { + list_del(&c->link); + dma_free_chunk(c); + } + + spin_unlock_irqrestore(&r->chunk_list.lock, flags); + return 0; +} + +/** + * dma_region_create_linear - Setup a linear dma maping for a device. + * @r: Pointer to a struct ps3_dma_region. + * + * This routine creates an HV dma region for the device and maps all available + * ram into the io controller bus address space. + */ + +static int dma_region_create_linear(struct ps3_dma_region *r) +{ + int result; + unsigned long tmp; + + /* force 16M dma pages for linear mapping */ + + if (r->page_size != PS3_DMA_16M) { + pr_info("%s:%d: forcing 16M pages for linear map\n", + __func__, __LINE__); + r->page_size = PS3_DMA_16M; + } + + result = dma_region_create(r); + BUG_ON(result); + + result = dma_map_area(r, map.rm.base, map.rm.size, &tmp); + BUG_ON(result); + + if (USE_LPAR_ADDR) + result = dma_map_area(r, map.r1.base, map.r1.size, + &tmp); + else + result = dma_map_area(r, map.rm.size, map.r1.size, + &tmp); + + BUG_ON(result); + + return result; +} + +/** + * dma_region_free_linear - Free a linear dma mapping for a device. + * @r: Pointer to a struct ps3_dma_region. + * + * This routine will unmap all mapped areas and free the HV dma region. + */ + +static int dma_region_free_linear(struct ps3_dma_region *r) +{ + int result; + + result = dma_unmap_area(r, dma_lpar_to_bus(r, 0), map.rm.size); + BUG_ON(result); + + result = dma_unmap_area(r, dma_lpar_to_bus(r, map.r1.base), + map.r1.size); + BUG_ON(result); + + result = dma_region_free(r); + BUG_ON(result); + + return result; +} + +/** + * dma_map_area_linear - Map an area of memory into a device dma region. + * @r: Pointer to a struct ps3_dma_region. + * @virt_addr: Starting virtual address of the area to map. + * @len: Length in bytes of the area to map. + * @bus_addr: A pointer to return the starting ioc bus address of the area to + * map. + * + * This routine just returns the coresponding bus address. Actual mapping + * occurs in dma_region_create_linear(). + */ + +static int dma_map_area_linear(struct ps3_dma_region *r, + unsigned long virt_addr, unsigned long len, unsigned long *bus_addr) +{ + unsigned long phys_addr = is_kernel_addr(virt_addr) ? __pa(virt_addr) + : virt_addr; + *bus_addr = dma_lpar_to_bus(r, ps3_mm_phys_to_lpar(phys_addr)); + return 0; +} + +/** + * dma_unmap_area_linear - Unmap an area of memory from a device dma region. + * @r: Pointer to a struct ps3_dma_region. + * @bus_addr: The starting ioc bus address of the area to unmap. + * @len: Length in bytes of the area to unmap. + * + * This routine does nothing. Unmapping occurs in dma_region_free_linear(). + */ + +static int dma_unmap_area_linear(struct ps3_dma_region *r, + unsigned long bus_addr, unsigned long len) +{ + return 0; +} + +int ps3_dma_region_create(struct ps3_dma_region *r) +{ + return (USE_DYNAMIC_DMA) + ? dma_region_create(r) + : dma_region_create_linear(r); +} + +int ps3_dma_region_free(struct ps3_dma_region *r) +{ + return (USE_DYNAMIC_DMA) + ? dma_region_free(r) + : dma_region_free_linear(r); +} + +int ps3_dma_map(struct ps3_dma_region *r, unsigned long virt_addr, + unsigned long len, unsigned long *bus_addr) +{ + return (USE_DYNAMIC_DMA) + ? dma_map_area(r, virt_addr, len, bus_addr) + : dma_map_area_linear(r, virt_addr, len, bus_addr); +} + +int ps3_dma_unmap(struct ps3_dma_region *r, unsigned long bus_addr, + unsigned long len) +{ + return (USE_DYNAMIC_DMA) ? dma_unmap_area(r, bus_addr, len) + : dma_unmap_area_linear(r, bus_addr, len); +} + +/*============================================================================*/ +/* system startup routines */ +/*============================================================================*/ + +/** + * ps3_mm_init - initialize the address space state variables + */ + +void __init ps3_mm_init(void) +{ + int result; + + DBG(" -> %s:%d\n", __func__, __LINE__); + + result = ps3_repository_read_mm_info(&map.rm.base, &map.rm.size, + &map.total); + + if (result) + panic("ps3_repository_read_mm_info() failed"); + + map.rm.offset = map.rm.base; + map.vas_id = map.htab_size = 0; + + /* this implementation assumes map.rm.base is zero */ + + BUG_ON(map.rm.base); + BUG_ON(!map.rm.size); + + lmb_add(map.rm.base, map.rm.size); + lmb_analyze(); + + /* arrange to do this in ps3_mm_add_memory */ + ps3_mm_region_create(&map.r1, map.total - map.rm.size); + + DBG(" <- %s:%d\n", __func__, __LINE__); +} + +/** + * ps3_mm_shutdown - final cleanup of address space + */ + +void ps3_mm_shutdown(void) +{ + ps3_mm_region_destroy(&map.r1); + map.total = map.rm.size; +} diff --git a/arch/powerpc/platforms/ps3/platform.h b/arch/powerpc/platforms/ps3/platform.h new file mode 100644 index 00000000000..d9948df6ccd --- /dev/null +++ b/arch/powerpc/platforms/ps3/platform.h @@ -0,0 +1,60 @@ +/* + * PS3 platform declarations. + * + * Copyright (C) 2006 Sony Computer Entertainment Inc. + * Copyright 2006 Sony Corp. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#if !defined(_PS3_PLATFORM_H) +#define _PS3_PLATFORM_H + +#include + +/* htab */ + +void __init ps3_hpte_init(unsigned long htab_size); +void __init ps3_map_htab(void); + +/* mm */ + +void __init ps3_mm_init(void); +void __init ps3_mm_vas_create(unsigned long* htab_size); +void ps3_mm_vas_destroy(void); +void ps3_mm_shutdown(void); + +/* irq */ + +void ps3_init_IRQ(void); +void __init ps3_register_ipi_debug_brk(unsigned int cpu, unsigned int virq); + +/* smp */ + +void smp_init_ps3(void); +void ps3_smp_cleanup_cpu(int cpu); + +/* time */ + +void __init ps3_calibrate_decr(void); +unsigned long __init ps3_get_boot_time(void); +void ps3_get_rtc_time(struct rtc_time *time); +int ps3_set_rtc_time(struct rtc_time *time); + +/* os area */ + +int __init ps3_os_area_init(void); +u64 ps3_os_area_rtc_diff(void); + +#endif diff --git a/arch/powerpc/platforms/ps3/setup.c b/arch/powerpc/platforms/ps3/setup.c new file mode 100644 index 00000000000..c1f6de50654 --- /dev/null +++ b/arch/powerpc/platforms/ps3/setup.c @@ -0,0 +1,173 @@ +/* + * PS3 platform setup routines. + * + * Copyright (C) 2006 Sony Computer Entertainment Inc. + * Copyright 2006 Sony Corp. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include + +#include "platform.h" + +#if defined(DEBUG) +#define DBG(fmt...) udbg_printf(fmt) +#else +#define DBG(fmt...) do{if(0)printk(fmt);}while(0) +#endif + +static void ps3_show_cpuinfo(struct seq_file *m) +{ + seq_printf(m, "machine\t\t: %s\n", ppc_md.name); +} + +static void ps3_power_save(void) +{ + /* + * lv1_pause() puts the PPE thread into inactive state until an + * irq on an unmasked plug exists. MSR[EE] has no effect. + * flags: 0 = wake on DEC interrupt, 1 = ignore DEC interrupt. + */ + + lv1_pause(0); +} + +static void ps3_panic(char *str) +{ + DBG("%s:%d %s\n", __func__, __LINE__, str); + +#ifdef CONFIG_SMP + smp_send_stop(); +#endif + printk("\n"); + printk(" System does not reboot automatically.\n"); + printk(" Please press POWER button.\n"); + printk("\n"); + + for (;;) ; +} + +static void __init ps3_setup_arch(void) +{ + DBG(" -> %s:%d\n", __func__, __LINE__); + + ps3_spu_set_platform(); + ps3_map_htab(); + +#ifdef CONFIG_SMP + smp_init_ps3(); +#endif + +#ifdef CONFIG_DUMMY_CONSOLE + conswitchp = &dummy_con; +#endif + + ppc_md.power_save = ps3_power_save; + + DBG(" <- %s:%d\n", __func__, __LINE__); +} + +static void __init ps3_progress(char *s, unsigned short hex) +{ + printk("*** %04x : %s\n", hex, s ? s : ""); +} + +static int __init ps3_probe(void) +{ + unsigned long htab_size; + unsigned long dt_root; + + DBG(" -> %s:%d\n", __func__, __LINE__); + + dt_root = of_get_flat_dt_root(); + if (!of_flat_dt_is_compatible(dt_root, "PS3")) + return 0; + + powerpc_firmware_features |= FW_FEATURE_LPAR; + + ps3_os_area_init(); + ps3_mm_init(); + ps3_mm_vas_create(&htab_size); + ps3_hpte_init(htab_size); + + DBG(" <- %s:%d\n", __func__, __LINE__); + return 1; +} + +#if defined(CONFIG_KEXEC) +static void ps3_kexec_cpu_down(int crash_shutdown, int secondary) +{ + DBG(" -> %s:%d\n", __func__, __LINE__); + + if (secondary) { + int cpu; + for_each_online_cpu(cpu) + if (cpu) + ps3_smp_cleanup_cpu(cpu); + } else + ps3_smp_cleanup_cpu(0); + + DBG(" <- %s:%d\n", __func__, __LINE__); +} + +static void ps3_machine_kexec(struct kimage *image) +{ + unsigned long ppe_id; + + DBG(" -> %s:%d\n", __func__, __LINE__); + + lv1_get_logical_ppe_id(&ppe_id); + lv1_configure_irq_state_bitmap(ppe_id, 0, 0); + ps3_mm_shutdown(); + ps3_mm_vas_destroy(); + + default_machine_kexec(image); + + DBG(" <- %s:%d\n", __func__, __LINE__); +} +#endif + +define_machine(ps3) { + .name = "PS3", + .probe = ps3_probe, + .setup_arch = ps3_setup_arch, + .show_cpuinfo = ps3_show_cpuinfo, + .init_IRQ = ps3_init_IRQ, + .panic = ps3_panic, + .get_boot_time = ps3_get_boot_time, + .set_rtc_time = ps3_set_rtc_time, + .get_rtc_time = ps3_get_rtc_time, + .calibrate_decr = ps3_calibrate_decr, + .progress = ps3_progress, +#if defined(CONFIG_KEXEC) + .kexec_cpu_down = ps3_kexec_cpu_down, + .machine_kexec = ps3_machine_kexec, + .machine_kexec_prepare = default_machine_kexec_prepare, + .machine_crash_shutdown = default_machine_crash_shutdown, +#endif +}; diff --git a/arch/powerpc/platforms/ps3/smp.c b/arch/powerpc/platforms/ps3/smp.c new file mode 100644 index 00000000000..11d2080607e --- /dev/null +++ b/arch/powerpc/platforms/ps3/smp.c @@ -0,0 +1,158 @@ +/* + * PS3 SMP routines. + * + * Copyright (C) 2006 Sony Computer Entertainment Inc. + * Copyright 2006 Sony Corp. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include +#include + +#include +#include +#include + +#include "platform.h" + +#if defined(DEBUG) +#define DBG(fmt...) udbg_printf(fmt) +#else +#define DBG(fmt...) do{if(0)printk(fmt);}while(0) +#endif + +static irqreturn_t ipi_function_handler(int irq, void *msg) +{ + smp_message_recv((int)(long)msg); + return IRQ_HANDLED; +} + +/** + * virqs - a per cpu array of virqs for ipi use + */ + +#define MSG_COUNT 4 +static DEFINE_PER_CPU(unsigned int, virqs[MSG_COUNT]); + +static const char *names[MSG_COUNT] = { + "ipi call", + "ipi reschedule", + "ipi migrate", + "ipi debug brk" +}; + +static void do_message_pass(int target, int msg) +{ + int result; + unsigned int virq; + + if (msg >= MSG_COUNT) { + DBG("%s:%d: bad msg: %d\n", __func__, __LINE__, msg); + return; + } + + virq = per_cpu(virqs, target)[msg]; + result = ps3_send_event_locally(virq); + + if (result) + DBG("%s:%d: ps3_send_event_locally(%d, %d) failed" + " (%d)\n", __func__, __LINE__, target, msg, result); +} + +static void ps3_smp_message_pass(int target, int msg) +{ + int cpu; + + if (target < NR_CPUS) + do_message_pass(target, msg); + else if (target == MSG_ALL_BUT_SELF) { + for_each_online_cpu(cpu) + if (cpu != smp_processor_id()) + do_message_pass(cpu, msg); + } else { + for_each_online_cpu(cpu) + do_message_pass(cpu, msg); + } +} + +static int ps3_smp_probe(void) +{ + return 2; +} + +static void __init ps3_smp_setup_cpu(int cpu) +{ + int result; + unsigned int *virqs = per_cpu(virqs, cpu); + int i; + + DBG(" -> %s:%d: (%d)\n", __func__, __LINE__, cpu); + + /* + * Check assumptions on virqs[] indexing. If this + * check fails, then a different mapping of PPC_MSG_ + * to index needs to be setup. + */ + + BUILD_BUG_ON(PPC_MSG_CALL_FUNCTION != 0); + BUILD_BUG_ON(PPC_MSG_RESCHEDULE != 1); + BUILD_BUG_ON(PPC_MSG_DEBUGGER_BREAK != 3); + + for (i = 0; i < MSG_COUNT; i++) { + result = ps3_alloc_event_irq(&virqs[i]); + + if (result) + continue; + + DBG("%s:%d: (%d, %d) => virq %u\n", + __func__, __LINE__, cpu, i, virqs[i]); + + + request_irq(virqs[i], ipi_function_handler, IRQF_DISABLED, + names[i], (void*)(long)i); + } + + ps3_register_ipi_debug_brk(cpu, virqs[PPC_MSG_DEBUGGER_BREAK]); + + DBG(" <- %s:%d: (%d)\n", __func__, __LINE__, cpu); +} + +void ps3_smp_cleanup_cpu(int cpu) +{ + unsigned int *virqs = per_cpu(virqs, cpu); + int i; + + DBG(" -> %s:%d: (%d)\n", __func__, __LINE__, cpu); + for (i = 0; i < MSG_COUNT; i++) { + ps3_free_event_irq(virqs[i]); + free_irq(virqs[i], (void*)(long)i); + virqs[i] = NO_IRQ; + } + DBG(" <- %s:%d: (%d)\n", __func__, __LINE__, cpu); +} + +static struct smp_ops_t ps3_smp_ops = { + .probe = ps3_smp_probe, + .message_pass = ps3_smp_message_pass, + .kick_cpu = smp_generic_kick_cpu, + .setup_cpu = ps3_smp_setup_cpu, +}; + +void smp_init_ps3(void) +{ + DBG(" -> %s\n", __func__); + smp_ops = &ps3_smp_ops; + DBG(" <- %s\n", __func__); +} diff --git a/arch/powerpc/platforms/ps3/time.c b/arch/powerpc/platforms/ps3/time.c new file mode 100644 index 00000000000..1bae8b19b36 --- /dev/null +++ b/arch/powerpc/platforms/ps3/time.c @@ -0,0 +1,104 @@ +/* + * PS3 time and rtc routines. + * + * Copyright (C) 2006 Sony Computer Entertainment Inc. + * Copyright 2006 Sony Corp. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include + +#include +#include +#include + +#include "platform.h" + +#define dump_tm(_a) _dump_tm(_a, __func__, __LINE__) +static void _dump_tm(const struct rtc_time *tm, const char* func, int line) +{ + pr_debug("%s:%d tm_sec %d\n", func, line, tm->tm_sec); + pr_debug("%s:%d tm_min %d\n", func, line, tm->tm_min); + pr_debug("%s:%d tm_hour %d\n", func, line, tm->tm_hour); + pr_debug("%s:%d tm_mday %d\n", func, line, tm->tm_mday); + pr_debug("%s:%d tm_mon %d\n", func, line, tm->tm_mon); + pr_debug("%s:%d tm_year %d\n", func, line, tm->tm_year); + pr_debug("%s:%d tm_wday %d\n", func, line, tm->tm_wday); +} + +#define dump_time(_a) _dump_time(_a, __func__, __LINE__) +static void __attribute__ ((unused)) _dump_time(int time, const char* func, + int line) +{ + struct rtc_time tm; + + to_tm(time, &tm); + + pr_debug("%s:%d time %d\n", func, line, time); + _dump_tm(&tm, func, line); +} + +/** + * rtc_shift - Difference in seconds between 1970 and the ps3 rtc value. + */ + +static s64 rtc_shift; + +void __init ps3_calibrate_decr(void) +{ + int result; + u64 tmp; + + result = ps3_repository_read_be_tb_freq(0, &tmp); + BUG_ON(result); + + ppc_tb_freq = tmp; + ppc_proc_freq = ppc_tb_freq * 40; + + rtc_shift = ps3_os_area_rtc_diff(); +} + +static u64 read_rtc(void) +{ + int result; + u64 rtc_val; + u64 tb_val; + + result = lv1_get_rtc(&rtc_val, &tb_val); + BUG_ON(result); + + return rtc_val; +} + +int ps3_set_rtc_time(struct rtc_time *tm) +{ + u64 now = mktime(tm->tm_year + 1900, tm->tm_mon + 1, tm->tm_mday, + tm->tm_hour, tm->tm_min, tm->tm_sec); + + rtc_shift = now - read_rtc(); + return 0; +} + +void ps3_get_rtc_time(struct rtc_time *tm) +{ + to_tm(read_rtc() + rtc_shift, tm); + tm->tm_year -= 1900; + tm->tm_mon -= 1; +} + +unsigned long __init ps3_get_boot_time(void) +{ + return read_rtc() + rtc_shift; +} diff --git a/include/asm-powerpc/ps3.h b/include/asm-powerpc/ps3.h new file mode 100644 index 00000000000..d0109ffac50 --- /dev/null +++ b/include/asm-powerpc/ps3.h @@ -0,0 +1,250 @@ +/* + * PS3 platform declarations. + * + * Copyright (C) 2006 Sony Computer Entertainment Inc. + * Copyright 2006 Sony Corp. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#if !defined(_ASM_POWERPC_PS3_H) +#define _ASM_POWERPC_PS3_H + +#include /* for __deprecated */ +#include +#include +#include + +/** + * struct ps3_device_id - HV bus device identifier from the system repository + * @bus_id: HV bus id, {1..} (zero invalid) + * @dev_id: HV device id, {0..} + */ + +struct ps3_device_id { + unsigned int bus_id; + unsigned int dev_id; +}; + + +/* dma routines */ + +enum ps3_dma_page_size { + PS3_DMA_4K = 12U, + PS3_DMA_64K = 16U, + PS3_DMA_1M = 20U, + PS3_DMA_16M = 24U, +}; + +enum ps3_dma_region_type { + PS3_DMA_OTHER = 0, + PS3_DMA_INTERNAL = 2, +}; + +/** + * struct ps3_dma_region - A per device dma state variables structure + * @did: The HV device id. + * @page_size: The ioc pagesize. + * @region_type: The HV region type. + * @bus_addr: The 'translated' bus address of the region. + * @len: The length in bytes of the region. + * @chunk_list: Opaque variable used by the ioc page manager. + */ + +struct ps3_dma_region { + struct ps3_device_id did; + enum ps3_dma_page_size page_size; + enum ps3_dma_region_type region_type; + unsigned long bus_addr; + unsigned long len; + struct { + spinlock_t lock; + struct list_head head; + } chunk_list; +}; + +/** + * struct ps3_dma_region_init - Helper to initialize structure variables + * + * Helper to properly initialize variables prior to calling + * ps3_system_bus_device_register. + */ + +static inline void ps3_dma_region_init(struct ps3_dma_region *r, + const struct ps3_device_id* did, enum ps3_dma_page_size page_size, + enum ps3_dma_region_type region_type) +{ + r->did = *did; + r->page_size = page_size; + r->region_type = region_type; +} +int ps3_dma_region_create(struct ps3_dma_region *r); +int ps3_dma_region_free(struct ps3_dma_region *r); +int ps3_dma_map(struct ps3_dma_region *r, unsigned long virt_addr, + unsigned long len, unsigned long *bus_addr); +int ps3_dma_unmap(struct ps3_dma_region *r, unsigned long bus_addr, + unsigned long len); + +/* mmio routines */ + +enum ps3_mmio_page_size { + PS3_MMIO_4K = 12U, + PS3_MMIO_64K = 16U +}; + +/** + * struct ps3_mmio_region - a per device mmio state variables structure + * + * Current systems can be supported with a single region per device. + */ + +struct ps3_mmio_region { + struct ps3_device_id did; + unsigned long bus_addr; + unsigned long len; + enum ps3_mmio_page_size page_size; + unsigned long lpar_addr; +}; + +/** + * struct ps3_mmio_region_init - Helper to initialize structure variables + * + * Helper to properly initialize variables prior to calling + * ps3_system_bus_device_register. + */ + +static inline void ps3_mmio_region_init(struct ps3_mmio_region *r, + const struct ps3_device_id* did, unsigned long bus_addr, + unsigned long len, enum ps3_mmio_page_size page_size) +{ + r->did = *did; + r->bus_addr = bus_addr; + r->len = len; + r->page_size = page_size; +} +int ps3_mmio_region_create(struct ps3_mmio_region *r); +int ps3_free_mmio_region(struct ps3_mmio_region *r); +unsigned long ps3_mm_phys_to_lpar(unsigned long phys_addr); + +/* inrerrupt routines */ + +int ps3_alloc_io_irq(unsigned int interrupt_id, unsigned int *virq); +int ps3_free_io_irq(unsigned int virq); +int ps3_alloc_event_irq(unsigned int *virq); +int ps3_free_event_irq(unsigned int virq); +int ps3_send_event_locally(unsigned int virq); +int ps3_connect_event_irq(const struct ps3_device_id *did, + unsigned int interrupt_id, unsigned int *virq); +int ps3_disconnect_event_irq(const struct ps3_device_id *did, + unsigned int interrupt_id, unsigned int virq); +int ps3_alloc_vuart_irq(void* virt_addr_bmp, unsigned int *virq); +int ps3_free_vuart_irq(unsigned int virq); +int ps3_alloc_spe_irq(unsigned long spe_id, unsigned int class, + unsigned int *virq); +int ps3_free_spe_irq(unsigned int virq); + +/* lv1 result codes */ + +enum lv1_result { + LV1_SUCCESS = 0, + /* not used -1 */ + LV1_RESOURCE_SHORTAGE = -2, + LV1_NO_PRIVILEGE = -3, + LV1_DENIED_BY_POLICY = -4, + LV1_ACCESS_VIOLATION = -5, + LV1_NO_ENTRY = -6, + LV1_DUPLICATE_ENTRY = -7, + LV1_TYPE_MISMATCH = -8, + LV1_BUSY = -9, + LV1_EMPTY = -10, + LV1_WRONG_STATE = -11, + /* not used -12 */ + LV1_NO_MATCH = -13, + LV1_ALREADY_CONNECTED = -14, + LV1_UNSUPPORTED_PARAMETER_VALUE = -15, + LV1_CONDITION_NOT_SATISFIED = -16, + LV1_ILLEGAL_PARAMETER_VALUE = -17, + LV1_BAD_OPTION = -18, + LV1_IMPLEMENTATION_LIMITATION = -19, + LV1_NOT_IMPLEMENTED = -20, + LV1_INVALID_CLASS_ID = -21, + LV1_CONSTRAINT_NOT_SATISFIED = -22, + LV1_ALIGNMENT_ERROR = -23, + LV1_INTERNAL_ERROR = -32768, +}; + +static inline const char* ps3_result(int result) +{ +#if defined(DEBUG) + switch (result) { + case LV1_SUCCESS: + return "LV1_SUCCESS (0)"; + case -1: + return "** unknown result ** (-1)"; + case LV1_RESOURCE_SHORTAGE: + return "LV1_RESOURCE_SHORTAGE (-2)"; + case LV1_NO_PRIVILEGE: + return "LV1_NO_PRIVILEGE (-3)"; + case LV1_DENIED_BY_POLICY: + return "LV1_DENIED_BY_POLICY (-4)"; + case LV1_ACCESS_VIOLATION: + return "LV1_ACCESS_VIOLATION (-5)"; + case LV1_NO_ENTRY: + return "LV1_NO_ENTRY (-6)"; + case LV1_DUPLICATE_ENTRY: + return "LV1_DUPLICATE_ENTRY (-7)"; + case LV1_TYPE_MISMATCH: + return "LV1_TYPE_MISMATCH (-8)"; + case LV1_BUSY: + return "LV1_BUSY (-9)"; + case LV1_EMPTY: + return "LV1_EMPTY (-10)"; + case LV1_WRONG_STATE: + return "LV1_WRONG_STATE (-11)"; + case -12: + return "** unknown result ** (-12)"; + case LV1_NO_MATCH: + return "LV1_NO_MATCH (-13)"; + case LV1_ALREADY_CONNECTED: + return "LV1_ALREADY_CONNECTED (-14)"; + case LV1_UNSUPPORTED_PARAMETER_VALUE: + return "LV1_UNSUPPORTED_PARAMETER_VALUE (-15)"; + case LV1_CONDITION_NOT_SATISFIED: + return "LV1_CONDITION_NOT_SATISFIED (-16)"; + case LV1_ILLEGAL_PARAMETER_VALUE: + return "LV1_ILLEGAL_PARAMETER_VALUE (-17)"; + case LV1_BAD_OPTION: + return "LV1_BAD_OPTION (-18)"; + case LV1_IMPLEMENTATION_LIMITATION: + return "LV1_IMPLEMENTATION_LIMITATION (-19)"; + case LV1_NOT_IMPLEMENTED: + return "LV1_NOT_IMPLEMENTED (-20)"; + case LV1_INVALID_CLASS_ID: + return "LV1_INVALID_CLASS_ID (-21)"; + case LV1_CONSTRAINT_NOT_SATISFIED: + return "LV1_CONSTRAINT_NOT_SATISFIED (-22)"; + case LV1_ALIGNMENT_ERROR: + return "LV1_ALIGNMENT_ERROR (-23)"; + case LV1_INTERNAL_ERROR: + return "LV1_INTERNAL_ERROR (-32768)"; + default: + BUG(); + return "** unknown result **"; + }; +#else + return ""; +#endif +} + +#endif -- cgit v1.2.3-70-g09d2 From 1e4ed915d133aaa2802d11914a7e80b3e31304e6 Mon Sep 17 00:00:00 2001 From: Geoff Levand Date: Thu, 23 Nov 2006 00:46:52 +0100 Subject: [POWERPC] ps3: add lv1 hvcalls Adds the PS3 hvcalls. Signed-off-by: Geoff Levand Signed-off-by: Arnd Bergmann --- arch/powerpc/platforms/ps3/exports.c | 27 ++ arch/powerpc/platforms/ps3/hvcall.S | 804 +++++++++++++++++++++++++++++++++++ include/asm-powerpc/lv1call.h | 345 +++++++++++++++ 3 files changed, 1176 insertions(+) create mode 100644 arch/powerpc/platforms/ps3/exports.c create mode 100644 arch/powerpc/platforms/ps3/hvcall.S create mode 100644 include/asm-powerpc/lv1call.h (limited to 'arch/powerpc') diff --git a/arch/powerpc/platforms/ps3/exports.c b/arch/powerpc/platforms/ps3/exports.c new file mode 100644 index 00000000000..a7e8ffd24a6 --- /dev/null +++ b/arch/powerpc/platforms/ps3/exports.c @@ -0,0 +1,27 @@ +/* + * PS3 hvcall exports for modules. + * + * Copyright (C) 2006 Sony Computer Entertainment Inc. + * Copyright 2006 Sony Corp. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include + +#define LV1_CALL(name, in, out, num) \ + extern s64 _lv1_##name(LV1_##in##_IN_##out##_OUT_ARG_DECL); \ + EXPORT_SYMBOL(_lv1_##name); + +#include diff --git a/arch/powerpc/platforms/ps3/hvcall.S b/arch/powerpc/platforms/ps3/hvcall.S new file mode 100644 index 00000000000..54be6523a0e --- /dev/null +++ b/arch/powerpc/platforms/ps3/hvcall.S @@ -0,0 +1,804 @@ +/* + * PS3 hvcall interface. + * + * Copyright (C) 2006 Sony Computer Entertainment Inc. + * Copyright 2006 Sony Corp. + * Copyright 2003, 2004 (c) MontaVista Software, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include +#include + +#define lv1call .long 0x44000022; extsw r3, r3 + +#define LV1_N_IN_0_OUT(API_NAME, API_NUMBER) \ +_GLOBAL(_##API_NAME) \ + \ + mflr r0; \ + std r0, 16(r1); \ + \ + li r11, API_NUMBER; \ + lv1call; \ + \ + ld r0, 16(r1); \ + mtlr r0; \ + blr + +#define LV1_0_IN_0_OUT LV1_N_IN_0_OUT +#define LV1_1_IN_0_OUT LV1_N_IN_0_OUT +#define LV1_2_IN_0_OUT LV1_N_IN_0_OUT +#define LV1_3_IN_0_OUT LV1_N_IN_0_OUT +#define LV1_4_IN_0_OUT LV1_N_IN_0_OUT +#define LV1_5_IN_0_OUT LV1_N_IN_0_OUT +#define LV1_6_IN_0_OUT LV1_N_IN_0_OUT +#define LV1_7_IN_0_OUT LV1_N_IN_0_OUT + +#define LV1_0_IN_1_OUT(API_NAME, API_NUMBER) \ +_GLOBAL(_##API_NAME) \ + \ + mflr r0; \ + std r0, 16(r1); \ + \ + stdu r3, -8(r1); \ + \ + li r11, API_NUMBER; \ + lv1call; \ + \ + addi r1, r1, 8; \ + ld r11, -8(r1); \ + std r4, 0(r11); \ + \ + ld r0, 16(r1); \ + mtlr r0; \ + blr + +#define LV1_0_IN_2_OUT(API_NAME, API_NUMBER) \ +_GLOBAL(_##API_NAME) \ + \ + mflr r0; \ + std r0, 16(r1); \ + \ + std r3, -8(r1); \ + stdu r4, -16(r1); \ + \ + li r11, API_NUMBER; \ + lv1call; \ + \ + addi r1, r1, 16; \ + ld r11, -8(r1); \ + std r4, 0(r11); \ + ld r11, -16(r1); \ + std r5, 0(r11); \ + \ + ld r0, 16(r1); \ + mtlr r0; \ + blr + +#define LV1_0_IN_3_OUT(API_NAME, API_NUMBER) \ +_GLOBAL(_##API_NAME) \ + \ + mflr r0; \ + std r0, 16(r1); \ + \ + std r3, -8(r1); \ + std r4, -16(r1); \ + stdu r5, -24(r1); \ + \ + li r11, API_NUMBER; \ + lv1call; \ + \ + addi r1, r1, 24; \ + ld r11, -8(r1); \ + std r4, 0(r11); \ + ld r11, -16(r1); \ + std r5, 0(r11); \ + ld r11, -24(r1); \ + std r6, 0(r11); \ + \ + ld r0, 16(r1); \ + mtlr r0; \ + blr + +#define LV1_0_IN_7_OUT(API_NAME, API_NUMBER) \ +_GLOBAL(_##API_NAME) \ + \ + mflr r0; \ + std r0, 16(r1); \ + \ + std r3, -8(r1); \ + std r4, -16(r1); \ + std r5, -24(r1); \ + std r6, -32(r1); \ + std r7, -40(r1); \ + std r8, -48(r1); \ + stdu r9, -56(r1); \ + \ + li r11, API_NUMBER; \ + lv1call; \ + \ + addi r1, r1, 56; \ + ld r11, -8(r1); \ + std r4, 0(r11); \ + ld r11, -16(r1); \ + std r5, 0(r11); \ + ld r11, -24(r1); \ + std r6, 0(r11); \ + ld r11, -32(r1); \ + std r7, 0(r11); \ + ld r11, -40(r1); \ + std r8, 0(r11); \ + ld r11, -48(r1); \ + std r9, 0(r11); \ + ld r11, -56(r1); \ + std r10, 0(r11); \ + \ + ld r0, 16(r1); \ + mtlr r0; \ + blr + +#define LV1_1_IN_1_OUT(API_NAME, API_NUMBER) \ +_GLOBAL(_##API_NAME) \ + \ + mflr r0; \ + std r0, 16(r1); \ + \ + stdu r4, -8(r1); \ + \ + li r11, API_NUMBER; \ + lv1call; \ + \ + addi r1, r1, 8; \ + ld r11, -8(r1); \ + std r4, 0(r11); \ + \ + ld r0, 16(r1); \ + mtlr r0; \ + blr + +#define LV1_1_IN_2_OUT(API_NAME, API_NUMBER) \ +_GLOBAL(_##API_NAME) \ + \ + mflr r0; \ + std r0, 16(r1); \ + \ + std r4, -8(r1); \ + stdu r5, -16(r1); \ + \ + li r11, API_NUMBER; \ + lv1call; \ + \ + addi r1, r1, 16; \ + ld r11, -8(r1); \ + std r4, 0(r11); \ + ld r11, -16(r1); \ + std r5, 0(r11); \ + \ + ld r0, 16(r1); \ + mtlr r0; \ + blr + +#define LV1_1_IN_3_OUT(API_NAME, API_NUMBER) \ +_GLOBAL(_##API_NAME) \ + \ + mflr r0; \ + std r0, 16(r1); \ + \ + std r4, -8(r1); \ + std r5, -16(r1); \ + stdu r6, -24(r1); \ + \ + li r11, API_NUMBER; \ + lv1call; \ + \ + addi r1, r1, 24; \ + ld r11, -8(r1); \ + std r4, 0(r11); \ + ld r11, -16(r1); \ + std r5, 0(r11); \ + ld r11, -24(r1); \ + std r6, 0(r11); \ + \ + ld r0, 16(r1); \ + mtlr r0; \ + blr + +#define LV1_1_IN_4_OUT(API_NAME, API_NUMBER) \ +_GLOBAL(_##API_NAME) \ + \ + mflr r0; \ + std r0, 16(r1); \ + \ + std r4, -8(r1); \ + std r5, -16(r1); \ + std r6, -24(r1); \ + stdu r7, -32(r1); \ + \ + li r11, API_NUMBER; \ + lv1call; \ + \ + addi r1, r1, 32; \ + ld r11, -8(r1); \ + std r4, 0(r11); \ + ld r11, -16(r1); \ + std r5, 0(r11); \ + ld r11, -24(r1); \ + std r6, 0(r11); \ + ld r11, -32(r1); \ + std r7, 0(r11); \ + \ + ld r0, 16(r1); \ + mtlr r0; \ + blr + +#define LV1_1_IN_5_OUT(API_NAME, API_NUMBER) \ +_GLOBAL(_##API_NAME) \ + \ + mflr r0; \ + std r0, 16(r1); \ + \ + std r4, -8(r1); \ + std r5, -16(r1); \ + std r6, -24(r1); \ + std r7, -32(r1); \ + stdu r8, -40(r1); \ + \ + li r11, API_NUMBER; \ + lv1call; \ + \ + addi r1, r1, 40; \ + ld r11, -8(r1); \ + std r4, 0(r11); \ + ld r11, -16(r1); \ + std r5, 0(r11); \ + ld r11, -24(r1); \ + std r6, 0(r11); \ + ld r11, -32(r1); \ + std r7, 0(r11); \ + ld r11, -40(r1); \ + std r8, 0(r11); \ + \ + ld r0, 16(r1); \ + mtlr r0; \ + blr + +#define LV1_1_IN_6_OUT(API_NAME, API_NUMBER) \ +_GLOBAL(_##API_NAME) \ + \ + mflr r0; \ + std r0, 16(r1); \ + \ + std r4, -8(r1); \ + std r5, -16(r1); \ + std r6, -24(r1); \ + std r7, -32(r1); \ + std r8, -40(r1); \ + stdu r9, -48(r1); \ + \ + li r11, API_NUMBER; \ + lv1call; \ + \ + addi r1, r1, 48; \ + ld r11, -8(r1); \ + std r4, 0(r11); \ + ld r11, -16(r1); \ + std r5, 0(r11); \ + ld r11, -24(r1); \ + std r6, 0(r11); \ + ld r11, -32(r1); \ + std r7, 0(r11); \ + ld r11, -40(r1); \ + std r8, 0(r11); \ + ld r11, -48(r1); \ + std r9, 0(r11); \ + \ + ld r0, 16(r1); \ + mtlr r0; \ + blr + +#define LV1_1_IN_7_OUT(API_NAME, API_NUMBER) \ +_GLOBAL(_##API_NAME) \ + \ + mflr r0; \ + std r0, 16(r1); \ + \ + std r4, -8(r1); \ + std r5, -16(r1); \ + std r6, -24(r1); \ + std r7, -32(r1); \ + std r8, -40(r1); \ + std r9, -48(r1); \ + stdu r10, -56(r1); \ + \ + li r11, API_NUMBER; \ + lv1call; \ + \ + addi r1, r1, 56; \ + ld r11, -8(r1); \ + std r4, 0(r11); \ + ld r11, -16(r1); \ + std r5, 0(r11); \ + ld r11, -24(r1); \ + std r6, 0(r11); \ + ld r11, -32(r1); \ + std r7, 0(r11); \ + ld r11, -40(r1); \ + std r8, 0(r11); \ + ld r11, -48(r1); \ + std r9, 0(r11); \ + ld r11, -56(r1); \ + std r10, 0(r11); \ + \ + ld r0, 16(r1); \ + mtlr r0; \ + blr + +#define LV1_2_IN_1_OUT(API_NAME, API_NUMBER) \ +_GLOBAL(_##API_NAME) \ + \ + mflr r0; \ + std r0, 16(r1); \ + \ + stdu r5, -8(r1); \ + \ + li r11, API_NUMBER; \ + lv1call; \ + \ + addi r1, r1, 8; \ + ld r11, -8(r1); \ + std r4, 0(r11); \ + \ + ld r0, 16(r1); \ + mtlr r0; \ + blr + +#define LV1_2_IN_2_OUT(API_NAME, API_NUMBER) \ +_GLOBAL(_##API_NAME) \ + \ + mflr r0; \ + std r0, 16(r1); \ + \ + std r5, -8(r1); \ + stdu r6, -16(r1); \ + \ + li r11, API_NUMBER; \ + lv1call; \ + \ + addi r1, r1, 16; \ + ld r11, -8(r1); \ + std r4, 0(r11); \ + ld r11, -16(r1); \ + std r5, 0(r11); \ + \ + ld r0, 16(r1); \ + mtlr r0; \ + blr + +#define LV1_2_IN_3_OUT(API_NAME, API_NUMBER) \ +_GLOBAL(_##API_NAME) \ + \ + mflr r0; \ + std r0, 16(r1); \ + \ + std r5, -8(r1); \ + std r6, -16(r1); \ + stdu r7, -24(r1); \ + \ + li r11, API_NUMBER; \ + lv1call; \ + \ + addi r1, r1, 24; \ + ld r11, -8(r1); \ + std r4, 0(r11); \ + ld r11, -16(r1); \ + std r5, 0(r11); \ + ld r11, -24(r1); \ + std r6, 0(r11); \ + \ + ld r0, 16(r1); \ + mtlr r0; \ + blr + +#define LV1_2_IN_4_OUT(API_NAME, API_NUMBER) \ +_GLOBAL(_##API_NAME) \ + \ + mflr r0; \ + std r0, 16(r1); \ + \ + std r5, -8(r1); \ + std r6, -16(r1); \ + std r7, -24(r1); \ + stdu r8, -32(r1); \ + \ + li r11, API_NUMBER; \ + lv1call; \ + \ + addi r1, r1, 32; \ + ld r11, -8(r1); \ + std r4, 0(r11); \ + ld r11, -16(r1); \ + std r5, 0(r11); \ + ld r11, -24(r1); \ + std r6, 0(r11); \ + ld r11, -32(r1); \ + std r7, 0(r11); \ + \ + ld r0, 16(r1); \ + mtlr r0; \ + blr + +#define LV1_2_IN_5_OUT(API_NAME, API_NUMBER) \ +_GLOBAL(_##API_NAME) \ + \ + mflr r0; \ + std r0, 16(r1); \ + \ + std r5, -8(r1); \ + std r6, -16(r1); \ + std r7, -24(r1); \ + std r8, -32(r1); \ + stdu r9, -40(r1); \ + \ + li r11, API_NUMBER; \ + lv1call; \ + \ + addi r1, r1, 40; \ + ld r11, -8(r1); \ + std r4, 0(r11); \ + ld r11, -16(r1); \ + std r5, 0(r11); \ + ld r11, -24(r1); \ + std r6, 0(r11); \ + ld r11, -32(r1); \ + std r7, 0(r11); \ + ld r11, -40(r1); \ + std r8, 0(r11); \ + \ + ld r0, 16(r1); \ + mtlr r0; \ + blr + +#define LV1_3_IN_1_OUT(API_NAME, API_NUMBER) \ +_GLOBAL(_##API_NAME) \ + \ + mflr r0; \ + std r0, 16(r1); \ + \ + stdu r6, -8(r1); \ + \ + li r11, API_NUMBER; \ + lv1call; \ + \ + addi r1, r1, 8; \ + ld r11, -8(r1); \ + std r4, 0(r11); \ + \ + ld r0, 16(r1); \ + mtlr r0; \ + blr + +#define LV1_3_IN_2_OUT(API_NAME, API_NUMBER) \ +_GLOBAL(_##API_NAME) \ + \ + mflr r0; \ + std r0, 16(r1); \ + \ + std r6, -8(r1); \ + stdu r7, -16(r1); \ + \ + li r11, API_NUMBER; \ + lv1call; \ + \ + addi r1, r1, 16; \ + ld r11, -8(r1); \ + std r4, 0(r11); \ + ld r11, -16(r1); \ + std r5, 0(r11); \ + \ + ld r0, 16(r1); \ + mtlr r0; \ + blr + +#define LV1_3_IN_3_OUT(API_NAME, API_NUMBER) \ +_GLOBAL(_##API_NAME) \ + \ + mflr r0; \ + std r0, 16(r1); \ + \ + std r6, -8(r1); \ + std r7, -16(r1); \ + stdu r8, -24(r1); \ + \ + li r11, API_NUMBER; \ + lv1call; \ + \ + addi r1, r1, 24; \ + ld r11, -8(r1); \ + std r4, 0(r11); \ + ld r11, -16(r1); \ + std r5, 0(r11); \ + ld r11, -24(r1); \ + std r6, 0(r11); \ + \ + ld r0, 16(r1); \ + mtlr r0; \ + blr + +#define LV1_4_IN_1_OUT(API_NAME, API_NUMBER) \ +_GLOBAL(_##API_NAME) \ + \ + mflr r0; \ + std r0, 16(r1); \ + \ + stdu r7, -8(r1); \ + \ + li r11, API_NUMBER; \ + lv1call; \ + \ + addi r1, r1, 8; \ + ld r11, -8(r1); \ + std r4, 0(r11); \ + \ + ld r0, 16(r1); \ + mtlr r0; \ + blr + +#define LV1_4_IN_2_OUT(API_NAME, API_NUMBER) \ +_GLOBAL(_##API_NAME) \ + \ + mflr r0; \ + std r0, 16(r1); \ + \ + std r7, -8(r1); \ + stdu r8, -16(r1); \ + \ + li r11, API_NUMBER; \ + lv1call; \ + \ + addi r1, r1, 16; \ + ld r11, -8(r1); \ + std r4, 0(r11); \ + ld r11, -16(r1); \ + std r5, 0(r11); \ + \ + ld r0, 16(r1); \ + mtlr r0; \ + blr + +#define LV1_4_IN_3_OUT(API_NAME, API_NUMBER) \ +_GLOBAL(_##API_NAME) \ + \ + mflr r0; \ + std r0, 16(r1); \ + \ + std r7, -8(r1); \ + std r8, -16(r1); \ + stdu r9, -24(r1); \ + \ + li r11, API_NUMBER; \ + lv1call; \ + \ + addi r1, r1, 24; \ + ld r11, -8(r1); \ + std r4, 0(r11); \ + ld r11, -16(r1); \ + std r5, 0(r11); \ + ld r11, -24(r1); \ + std r6, 0(r11); \ + \ + ld r0, 16(r1); \ + mtlr r0; \ + blr + +#define LV1_5_IN_1_OUT(API_NAME, API_NUMBER) \ +_GLOBAL(_##API_NAME) \ + \ + mflr r0; \ + std r0, 16(r1); \ + \ + stdu r8, -8(r1); \ + \ + li r11, API_NUMBER; \ + lv1call; \ + \ + addi r1, r1, 8; \ + ld r11, -8(r1); \ + std r4, 0(r11); \ + \ + ld r0, 16(r1); \ + mtlr r0; \ + blr + +#define LV1_5_IN_2_OUT(API_NAME, API_NUMBER) \ +_GLOBAL(_##API_NAME) \ + \ + mflr r0; \ + std r0, 16(r1); \ + \ + std r8, -8(r1); \ + stdu r9, -16(r1); \ + \ + li r11, API_NUMBER; \ + lv1call; \ + \ + addi r1, r1, 16; \ + ld r11, -8(r1); \ + std r4, 0(r11); \ + ld r11, -16(r1); \ + std r5, 0(r11); \ + \ + ld r0, 16(r1); \ + mtlr r0; \ + blr + +#define LV1_5_IN_3_OUT(API_NAME, API_NUMBER) \ +_GLOBAL(_##API_NAME) \ + \ + mflr r0; \ + std r0, 16(r1); \ + \ + std r8, -8(r1); \ + std r9, -16(r1); \ + stdu r10, -24(r1); \ + \ + li r11, API_NUMBER; \ + lv1call; \ + \ + addi r1, r1, 24; \ + ld r11, -8(r1); \ + std r4, 0(r11); \ + ld r11, -16(r1); \ + std r5, 0(r11); \ + ld r11, -24(r1); \ + std r6, 0(r11); \ + \ + ld r0, 16(r1); \ + mtlr r0; \ + blr + +#define LV1_6_IN_1_OUT(API_NAME, API_NUMBER) \ +_GLOBAL(_##API_NAME) \ + \ + mflr r0; \ + std r0, 16(r1); \ + \ + stdu r9, -8(r1); \ + \ + li r11, API_NUMBER; \ + lv1call; \ + \ + addi r1, r1, 8; \ + ld r11, -8(r1); \ + std r4, 0(r11); \ + \ + ld r0, 16(r1); \ + mtlr r0; \ + blr + +#define LV1_6_IN_2_OUT(API_NAME, API_NUMBER) \ +_GLOBAL(_##API_NAME) \ + \ + mflr r0; \ + std r0, 16(r1); \ + \ + std r9, -8(r1); \ + stdu r10, -16(r1); \ + \ + li r11, API_NUMBER; \ + lv1call; \ + \ + addi r1, r1, 16; \ + ld r11, -8(r1); \ + std r4, 0(r11); \ + ld r11, -16(r1); \ + std r5, 0(r11); \ + \ + ld r0, 16(r1); \ + mtlr r0; \ + blr + +#define LV1_6_IN_3_OUT(API_NAME, API_NUMBER) \ +_GLOBAL(_##API_NAME) \ + \ + mflr r0; \ + std r0, 16(r1); \ + \ + std r9, -8(r1); \ + stdu r10, -16(r1); \ + \ + li r11, API_NUMBER; \ + lv1call; \ + \ + addi r1, r1, 16; \ + ld r11, -8(r1); \ + std r4, 0(r11); \ + ld r11, -16(r1); \ + std r5, 0(r11); \ + ld r11, 48+8*8(r1); \ + std r6, 0(r11); \ + \ + ld r0, 16(r1); \ + mtlr r0; \ + blr + +#define LV1_7_IN_1_OUT(API_NAME, API_NUMBER) \ +_GLOBAL(_##API_NAME) \ + \ + mflr r0; \ + std r0, 16(r1); \ + \ + stdu r10, -8(r1); \ + \ + li r11, API_NUMBER; \ + lv1call; \ + \ + addi r1, r1, 8; \ + ld r11, -8(r1); \ + std r4, 0(r11); \ + \ + ld r0, 16(r1); \ + mtlr r0; \ + blr + +#define LV1_7_IN_6_OUT(API_NAME, API_NUMBER) \ +_GLOBAL(_##API_NAME) \ + \ + mflr r0; \ + std r0, 16(r1); \ + \ + std r10, 48+8*7(r1); \ + \ + li r11, API_NUMBER; \ + lv1call; \ + \ + ld r11, 48+8*7(r1); \ + std r4, 0(r11); \ + ld r11, 48+8*8(r1); \ + std r5, 0(r11); \ + ld r11, 48+8*9(r1); \ + std r6, 0(r11); \ + ld r11, 48+8*10(r1); \ + std r7, 0(r11); \ + ld r11, 48+8*11(r1); \ + std r8, 0(r11); \ + ld r11, 48+8*12(r1); \ + std r9, 0(r11); \ + \ + ld r0, 16(r1); \ + mtlr r0; \ + blr + +#define LV1_8_IN_1_OUT(API_NAME, API_NUMBER) \ +_GLOBAL(_##API_NAME) \ + \ + mflr r0; \ + std r0, 16(r1); \ + \ + li r11, API_NUMBER; \ + lv1call; \ + \ + ld r11, 48+8*8(r1); \ + std r4, 0(r11); \ + \ + ld r0, 16(r1); \ + mtlr r0; \ + blr + + .text + +/* the lv1 underscored call definitions expand here */ + +#define LV1_CALL(name, in, out, num) LV1_##in##_IN_##out##_OUT(lv1_##name, num) +#include diff --git a/include/asm-powerpc/lv1call.h b/include/asm-powerpc/lv1call.h new file mode 100644 index 00000000000..f733beeea63 --- /dev/null +++ b/include/asm-powerpc/lv1call.h @@ -0,0 +1,345 @@ +/* + * PS3 hvcall interface. + * + * Copyright (C) 2006 Sony Computer Entertainment Inc. + * Copyright 2006 Sony Corp. + * Copyright 2003, 2004 (c) MontaVista Software, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#if !defined(_ASM_POWERPC_LV1CALL_H) +#define _ASM_POWERPC_LV1CALL_H + +#if !defined(__ASSEMBLY__) + +#include + +/* lv1 call declaration macros */ + +#define LV1_1_IN_ARG_DECL u64 in_1 +#define LV1_2_IN_ARG_DECL LV1_1_IN_ARG_DECL, u64 in_2 +#define LV1_3_IN_ARG_DECL LV1_2_IN_ARG_DECL, u64 in_3 +#define LV1_4_IN_ARG_DECL LV1_3_IN_ARG_DECL, u64 in_4 +#define LV1_5_IN_ARG_DECL LV1_4_IN_ARG_DECL, u64 in_5 +#define LV1_6_IN_ARG_DECL LV1_5_IN_ARG_DECL, u64 in_6 +#define LV1_7_IN_ARG_DECL LV1_6_IN_ARG_DECL, u64 in_7 +#define LV1_8_IN_ARG_DECL LV1_7_IN_ARG_DECL, u64 in_8 +#define LV1_1_OUT_ARG_DECL u64 *out_1 +#define LV1_2_OUT_ARG_DECL LV1_1_OUT_ARG_DECL, u64 *out_2 +#define LV1_3_OUT_ARG_DECL LV1_2_OUT_ARG_DECL, u64 *out_3 +#define LV1_4_OUT_ARG_DECL LV1_3_OUT_ARG_DECL, u64 *out_4 +#define LV1_5_OUT_ARG_DECL LV1_4_OUT_ARG_DECL, u64 *out_5 +#define LV1_6_OUT_ARG_DECL LV1_5_OUT_ARG_DECL, u64 *out_6 +#define LV1_7_OUT_ARG_DECL LV1_6_OUT_ARG_DECL, u64 *out_7 + +#define LV1_0_IN_0_OUT_ARG_DECL void +#define LV1_1_IN_0_OUT_ARG_DECL LV1_1_IN_ARG_DECL +#define LV1_2_IN_0_OUT_ARG_DECL LV1_2_IN_ARG_DECL +#define LV1_3_IN_0_OUT_ARG_DECL LV1_3_IN_ARG_DECL +#define LV1_4_IN_0_OUT_ARG_DECL LV1_4_IN_ARG_DECL +#define LV1_5_IN_0_OUT_ARG_DECL LV1_5_IN_ARG_DECL +#define LV1_6_IN_0_OUT_ARG_DECL LV1_6_IN_ARG_DECL +#define LV1_7_IN_0_OUT_ARG_DECL LV1_7_IN_ARG_DECL + +#define LV1_0_IN_1_OUT_ARG_DECL LV1_1_OUT_ARG_DECL +#define LV1_1_IN_1_OUT_ARG_DECL LV1_1_IN_ARG_DECL, LV1_1_OUT_ARG_DECL +#define LV1_2_IN_1_OUT_ARG_DECL LV1_2_IN_ARG_DECL, LV1_1_OUT_ARG_DECL +#define LV1_3_IN_1_OUT_ARG_DECL LV1_3_IN_ARG_DECL, LV1_1_OUT_ARG_DECL +#define LV1_4_IN_1_OUT_ARG_DECL LV1_4_IN_ARG_DECL, LV1_1_OUT_ARG_DECL +#define LV1_5_IN_1_OUT_ARG_DECL LV1_5_IN_ARG_DECL, LV1_1_OUT_ARG_DECL +#define LV1_6_IN_1_OUT_ARG_DECL LV1_6_IN_ARG_DECL, LV1_1_OUT_ARG_DECL +#define LV1_7_IN_1_OUT_ARG_DECL LV1_7_IN_ARG_DECL, LV1_1_OUT_ARG_DECL +#define LV1_8_IN_1_OUT_ARG_DECL LV1_8_IN_ARG_DECL, LV1_1_OUT_ARG_DECL + +#define LV1_0_IN_2_OUT_ARG_DECL LV1_2_OUT_ARG_DECL +#define LV1_1_IN_2_OUT_ARG_DECL LV1_1_IN_ARG_DECL, LV1_2_OUT_ARG_DECL +#define LV1_2_IN_2_OUT_ARG_DECL LV1_2_IN_ARG_DECL, LV1_2_OUT_ARG_DECL +#define LV1_3_IN_2_OUT_ARG_DECL LV1_3_IN_ARG_DECL, LV1_2_OUT_ARG_DECL +#define LV1_4_IN_2_OUT_ARG_DECL LV1_4_IN_ARG_DECL, LV1_2_OUT_ARG_DECL +#define LV1_5_IN_2_OUT_ARG_DECL LV1_5_IN_ARG_DECL, LV1_2_OUT_ARG_DECL +#define LV1_6_IN_2_OUT_ARG_DECL LV1_6_IN_ARG_DECL, LV1_2_OUT_ARG_DECL +#define LV1_7_IN_2_OUT_ARG_DECL LV1_7_IN_ARG_DECL, LV1_2_OUT_ARG_DECL + +#define LV1_0_IN_3_OUT_ARG_DECL LV1_3_OUT_ARG_DECL +#define LV1_1_IN_3_OUT_ARG_DECL LV1_1_IN_ARG_DECL, LV1_3_OUT_ARG_DECL +#define LV1_2_IN_3_OUT_ARG_DECL LV1_2_IN_ARG_DECL, LV1_3_OUT_ARG_DECL +#define LV1_3_IN_3_OUT_ARG_DECL LV1_3_IN_ARG_DECL, LV1_3_OUT_ARG_DECL +#define LV1_4_IN_3_OUT_ARG_DECL LV1_4_IN_ARG_DECL, LV1_3_OUT_ARG_DECL +#define LV1_5_IN_3_OUT_ARG_DECL LV1_5_IN_ARG_DECL, LV1_3_OUT_ARG_DECL +#define LV1_6_IN_3_OUT_ARG_DECL LV1_6_IN_ARG_DECL, LV1_3_OUT_ARG_DECL +#define LV1_7_IN_3_OUT_ARG_DECL LV1_7_IN_ARG_DECL, LV1_3_OUT_ARG_DECL + +#define LV1_0_IN_4_OUT_ARG_DECL LV1_4_OUT_ARG_DECL +#define LV1_1_IN_4_OUT_ARG_DECL LV1_1_IN_ARG_DECL, LV1_4_OUT_ARG_DECL +#define LV1_2_IN_4_OUT_ARG_DECL LV1_2_IN_ARG_DECL, LV1_4_OUT_ARG_DECL +#define LV1_3_IN_4_OUT_ARG_DECL LV1_3_IN_ARG_DECL, LV1_4_OUT_ARG_DECL +#define LV1_4_IN_4_OUT_ARG_DECL LV1_4_IN_ARG_DECL, LV1_4_OUT_ARG_DECL +#define LV1_5_IN_4_OUT_ARG_DECL LV1_5_IN_ARG_DECL, LV1_4_OUT_ARG_DECL +#define LV1_6_IN_4_OUT_ARG_DECL LV1_6_IN_ARG_DECL, LV1_4_OUT_ARG_DECL +#define LV1_7_IN_4_OUT_ARG_DECL LV1_7_IN_ARG_DECL, LV1_4_OUT_ARG_DECL + +#define LV1_0_IN_5_OUT_ARG_DECL LV1_5_OUT_ARG_DECL +#define LV1_1_IN_5_OUT_ARG_DECL LV1_1_IN_ARG_DECL, LV1_5_OUT_ARG_DECL +#define LV1_2_IN_5_OUT_ARG_DECL LV1_2_IN_ARG_DECL, LV1_5_OUT_ARG_DECL +#define LV1_3_IN_5_OUT_ARG_DECL LV1_3_IN_ARG_DECL, LV1_5_OUT_ARG_DECL +#define LV1_4_IN_5_OUT_ARG_DECL LV1_4_IN_ARG_DECL, LV1_5_OUT_ARG_DECL +#define LV1_5_IN_5_OUT_ARG_DECL LV1_5_IN_ARG_DECL, LV1_5_OUT_ARG_DECL +#define LV1_6_IN_5_OUT_ARG_DECL LV1_6_IN_ARG_DECL, LV1_5_OUT_ARG_DECL +#define LV1_7_IN_5_OUT_ARG_DECL LV1_7_IN_ARG_DECL, LV1_5_OUT_ARG_DECL + +#define LV1_0_IN_6_OUT_ARG_DECL LV1_6_OUT_ARG_DECL +#define LV1_1_IN_6_OUT_ARG_DECL LV1_1_IN_ARG_DECL, LV1_6_OUT_ARG_DECL +#define LV1_2_IN_6_OUT_ARG_DECL LV1_2_IN_ARG_DECL, LV1_6_OUT_ARG_DECL +#define LV1_3_IN_6_OUT_ARG_DECL LV1_3_IN_ARG_DECL, LV1_6_OUT_ARG_DECL +#define LV1_4_IN_6_OUT_ARG_DECL LV1_4_IN_ARG_DECL, LV1_6_OUT_ARG_DECL +#define LV1_5_IN_6_OUT_ARG_DECL LV1_5_IN_ARG_DECL, LV1_6_OUT_ARG_DECL +#define LV1_6_IN_6_OUT_ARG_DECL LV1_6_IN_ARG_DECL, LV1_6_OUT_ARG_DECL +#define LV1_7_IN_6_OUT_ARG_DECL LV1_7_IN_ARG_DECL, LV1_6_OUT_ARG_DECL + +#define LV1_0_IN_7_OUT_ARG_DECL LV1_7_OUT_ARG_DECL +#define LV1_1_IN_7_OUT_ARG_DECL LV1_1_IN_ARG_DECL, LV1_7_OUT_ARG_DECL +#define LV1_2_IN_7_OUT_ARG_DECL LV1_2_IN_ARG_DECL, LV1_7_OUT_ARG_DECL +#define LV1_3_IN_7_OUT_ARG_DECL LV1_3_IN_ARG_DECL, LV1_7_OUT_ARG_DECL +#define LV1_4_IN_7_OUT_ARG_DECL LV1_4_IN_ARG_DECL, LV1_7_OUT_ARG_DECL +#define LV1_5_IN_7_OUT_ARG_DECL LV1_5_IN_ARG_DECL, LV1_7_OUT_ARG_DECL +#define LV1_6_IN_7_OUT_ARG_DECL LV1_6_IN_ARG_DECL, LV1_7_OUT_ARG_DECL +#define LV1_7_IN_7_OUT_ARG_DECL LV1_7_IN_ARG_DECL, LV1_7_OUT_ARG_DECL + +#define LV1_1_IN_ARGS in_1 +#define LV1_2_IN_ARGS LV1_1_IN_ARGS, in_2 +#define LV1_3_IN_ARGS LV1_2_IN_ARGS, in_3 +#define LV1_4_IN_ARGS LV1_3_IN_ARGS, in_4 +#define LV1_5_IN_ARGS LV1_4_IN_ARGS, in_5 +#define LV1_6_IN_ARGS LV1_5_IN_ARGS, in_6 +#define LV1_7_IN_ARGS LV1_6_IN_ARGS, in_7 +#define LV1_8_IN_ARGS LV1_7_IN_ARGS, in_8 + +#define LV1_1_OUT_ARGS out_1 +#define LV1_2_OUT_ARGS LV1_1_OUT_ARGS, out_2 +#define LV1_3_OUT_ARGS LV1_2_OUT_ARGS, out_3 +#define LV1_4_OUT_ARGS LV1_3_OUT_ARGS, out_4 +#define LV1_5_OUT_ARGS LV1_4_OUT_ARGS, out_5 +#define LV1_6_OUT_ARGS LV1_5_OUT_ARGS, out_6 +#define LV1_7_OUT_ARGS LV1_6_OUT_ARGS, out_7 + +#define LV1_0_IN_0_OUT_ARGS +#define LV1_1_IN_0_OUT_ARGS LV1_1_IN_ARGS +#define LV1_2_IN_0_OUT_ARGS LV1_2_IN_ARGS +#define LV1_3_IN_0_OUT_ARGS LV1_3_IN_ARGS +#define LV1_4_IN_0_OUT_ARGS LV1_4_IN_ARGS +#define LV1_5_IN_0_OUT_ARGS LV1_5_IN_ARGS +#define LV1_6_IN_0_OUT_ARGS LV1_6_IN_ARGS +#define LV1_7_IN_0_OUT_ARGS LV1_7_IN_ARGS + +#define LV1_0_IN_1_OUT_ARGS LV1_1_OUT_ARGS +#define LV1_1_IN_1_OUT_ARGS LV1_1_IN_ARGS, LV1_1_OUT_ARGS +#define LV1_2_IN_1_OUT_ARGS LV1_2_IN_ARGS, LV1_1_OUT_ARGS +#define LV1_3_IN_1_OUT_ARGS LV1_3_IN_ARGS, LV1_1_OUT_ARGS +#define LV1_4_IN_1_OUT_ARGS LV1_4_IN_ARGS, LV1_1_OUT_ARGS +#define LV1_5_IN_1_OUT_ARGS LV1_5_IN_ARGS, LV1_1_OUT_ARGS +#define LV1_6_IN_1_OUT_ARGS LV1_6_IN_ARGS, LV1_1_OUT_ARGS +#define LV1_7_IN_1_OUT_ARGS LV1_7_IN_ARGS, LV1_1_OUT_ARGS +#define LV1_8_IN_1_OUT_ARGS LV1_8_IN_ARGS, LV1_1_OUT_ARGS + +#define LV1_0_IN_2_OUT_ARGS LV1_2_OUT_ARGS +#define LV1_1_IN_2_OUT_ARGS LV1_1_IN_ARGS, LV1_2_OUT_ARGS +#define LV1_2_IN_2_OUT_ARGS LV1_2_IN_ARGS, LV1_2_OUT_ARGS +#define LV1_3_IN_2_OUT_ARGS LV1_3_IN_ARGS, LV1_2_OUT_ARGS +#define LV1_4_IN_2_OUT_ARGS LV1_4_IN_ARGS, LV1_2_OUT_ARGS +#define LV1_5_IN_2_OUT_ARGS LV1_5_IN_ARGS, LV1_2_OUT_ARGS +#define LV1_6_IN_2_OUT_ARGS LV1_6_IN_ARGS, LV1_2_OUT_ARGS +#define LV1_7_IN_2_OUT_ARGS LV1_7_IN_ARGS, LV1_2_OUT_ARGS + +#define LV1_0_IN_3_OUT_ARGS LV1_3_OUT_ARGS +#define LV1_1_IN_3_OUT_ARGS LV1_1_IN_ARGS, LV1_3_OUT_ARGS +#define LV1_2_IN_3_OUT_ARGS LV1_2_IN_ARGS, LV1_3_OUT_ARGS +#define LV1_3_IN_3_OUT_ARGS LV1_3_IN_ARGS, LV1_3_OUT_ARGS +#define LV1_4_IN_3_OUT_ARGS LV1_4_IN_ARGS, LV1_3_OUT_ARGS +#define LV1_5_IN_3_OUT_ARGS LV1_5_IN_ARGS, LV1_3_OUT_ARGS +#define LV1_6_IN_3_OUT_ARGS LV1_6_IN_ARGS, LV1_3_OUT_ARGS +#define LV1_7_IN_3_OUT_ARGS LV1_7_IN_ARGS, LV1_3_OUT_ARGS + +#define LV1_0_IN_4_OUT_ARGS LV1_4_OUT_ARGS +#define LV1_1_IN_4_OUT_ARGS LV1_1_IN_ARGS, LV1_4_OUT_ARGS +#define LV1_2_IN_4_OUT_ARGS LV1_2_IN_ARGS, LV1_4_OUT_ARGS +#define LV1_3_IN_4_OUT_ARGS LV1_3_IN_ARGS, LV1_4_OUT_ARGS +#define LV1_4_IN_4_OUT_ARGS LV1_4_IN_ARGS, LV1_4_OUT_ARGS +#define LV1_5_IN_4_OUT_ARGS LV1_5_IN_ARGS, LV1_4_OUT_ARGS +#define LV1_6_IN_4_OUT_ARGS LV1_6_IN_ARGS, LV1_4_OUT_ARGS +#define LV1_7_IN_4_OUT_ARGS LV1_7_IN_ARGS, LV1_4_OUT_ARGS + +#define LV1_0_IN_5_OUT_ARGS LV1_5_OUT_ARGS +#define LV1_1_IN_5_OUT_ARGS LV1_1_IN_ARGS, LV1_5_OUT_ARGS +#define LV1_2_IN_5_OUT_ARGS LV1_2_IN_ARGS, LV1_5_OUT_ARGS +#define LV1_3_IN_5_OUT_ARGS LV1_3_IN_ARGS, LV1_5_OUT_ARGS +#define LV1_4_IN_5_OUT_ARGS LV1_4_IN_ARGS, LV1_5_OUT_ARGS +#define LV1_5_IN_5_OUT_ARGS LV1_5_IN_ARGS, LV1_5_OUT_ARGS +#define LV1_6_IN_5_OUT_ARGS LV1_6_IN_ARGS, LV1_5_OUT_ARGS +#define LV1_7_IN_5_OUT_ARGS LV1_7_IN_ARGS, LV1_5_OUT_ARGS + +#define LV1_0_IN_6_OUT_ARGS LV1_6_OUT_ARGS +#define LV1_1_IN_6_OUT_ARGS LV1_1_IN_ARGS, LV1_6_OUT_ARGS +#define LV1_2_IN_6_OUT_ARGS LV1_2_IN_ARGS, LV1_6_OUT_ARGS +#define LV1_3_IN_6_OUT_ARGS LV1_3_IN_ARGS, LV1_6_OUT_ARGS +#define LV1_4_IN_6_OUT_ARGS LV1_4_IN_ARGS, LV1_6_OUT_ARGS +#define LV1_5_IN_6_OUT_ARGS LV1_5_IN_ARGS, LV1_6_OUT_ARGS +#define LV1_6_IN_6_OUT_ARGS LV1_6_IN_ARGS, LV1_6_OUT_ARGS +#define LV1_7_IN_6_OUT_ARGS LV1_7_IN_ARGS, LV1_6_OUT_ARGS + +#define LV1_0_IN_7_OUT_ARGS LV1_7_OUT_ARGS +#define LV1_1_IN_7_OUT_ARGS LV1_1_IN_ARGS, LV1_7_OUT_ARGS +#define LV1_2_IN_7_OUT_ARGS LV1_2_IN_ARGS, LV1_7_OUT_ARGS +#define LV1_3_IN_7_OUT_ARGS LV1_3_IN_ARGS, LV1_7_OUT_ARGS +#define LV1_4_IN_7_OUT_ARGS LV1_4_IN_ARGS, LV1_7_OUT_ARGS +#define LV1_5_IN_7_OUT_ARGS LV1_5_IN_ARGS, LV1_7_OUT_ARGS +#define LV1_6_IN_7_OUT_ARGS LV1_6_IN_ARGS, LV1_7_OUT_ARGS +#define LV1_7_IN_7_OUT_ARGS LV1_7_IN_ARGS, LV1_7_OUT_ARGS + +/* + * This LV1_CALL() macro is for use by callers. It expands into an + * inline call wrapper and an underscored HV call declaration. The + * wrapper can be used to instrument the lv1 call interface. The + * file lv1call.S defines its own LV1_CALL() macro to expand into + * the actual underscored call definition. + */ + +#if !defined(LV1_CALL) +#define LV1_CALL(name, in, out, num) \ + extern s64 _lv1_##name(LV1_##in##_IN_##out##_OUT_ARG_DECL); \ + static inline int lv1_##name(LV1_##in##_IN_##out##_OUT_ARG_DECL) \ + {return _lv1_##name(LV1_##in##_IN_##out##_OUT_ARGS);} +#endif + +#endif /* !defined(__ASSEMBLY__) */ + +/* lv1 call table */ + +LV1_CALL(allocate_memory, 4, 2, 0 ) +LV1_CALL(write_htab_entry, 4, 0, 1 ) +LV1_CALL(construct_virtual_address_space, 3, 2, 2 ) +LV1_CALL(invalidate_htab_entries, 5, 0, 3 ) +LV1_CALL(get_virtual_address_space_id_of_ppe, 1, 1, 4 ) +LV1_CALL(query_logical_partition_address_region_info, 1, 5, 6 ) +LV1_CALL(select_virtual_address_space, 1, 0, 7 ) +LV1_CALL(pause, 1, 0, 9 ) +LV1_CALL(destruct_virtual_address_space, 1, 0, 10 ) +LV1_CALL(configure_irq_state_bitmap, 3, 0, 11 ) +LV1_CALL(connect_irq_plug_ext, 5, 0, 12 ) +LV1_CALL(release_memory, 1, 0, 13 ) +LV1_CALL(disconnect_irq_plug_ext, 3, 0, 17 ) +LV1_CALL(construct_event_receive_port, 0, 1, 18 ) +LV1_CALL(destruct_event_receive_port, 1, 0, 19 ) +LV1_CALL(send_event_locally, 1, 0, 24 ) +LV1_CALL(end_of_interrupt, 1, 0, 27 ) +LV1_CALL(connect_irq_plug, 2, 0, 28 ) +LV1_CALL(disconnect_irq_plug, 1, 0, 29 ) +LV1_CALL(end_of_interrupt_ext, 3, 0, 30 ) +LV1_CALL(did_update_interrupt_mask, 2, 0, 31 ) +LV1_CALL(shutdown_logical_partition, 1, 0, 44 ) +LV1_CALL(destruct_logical_spe, 1, 0, 54 ) +LV1_CALL(construct_logical_spe, 7, 6, 57 ) +LV1_CALL(set_spe_interrupt_mask, 3, 0, 61 ) +LV1_CALL(set_spe_transition_notifier, 3, 0, 64 ) +LV1_CALL(disable_logical_spe, 2, 0, 65 ) +LV1_CALL(clear_spe_interrupt_status, 4, 0, 66 ) +LV1_CALL(get_spe_interrupt_status, 2, 1, 67 ) +LV1_CALL(get_logical_ppe_id, 0, 1, 69 ) +LV1_CALL(set_interrupt_mask, 5, 0, 73 ) +LV1_CALL(get_logical_partition_id, 0, 1, 74 ) +LV1_CALL(configure_execution_time_variable, 1, 0, 77 ) +LV1_CALL(get_spe_irq_outlet, 2, 1, 78 ) +LV1_CALL(set_spe_privilege_state_area_1_register, 3, 0, 79 ) +LV1_CALL(create_repository_node, 6, 0, 90 ) +LV1_CALL(get_repository_node_value, 5, 2, 91 ) +LV1_CALL(modify_repository_node_value, 6, 0, 92 ) +LV1_CALL(remove_repository_node, 4, 0, 93 ) +LV1_CALL(read_htab_entries, 2, 5, 95 ) +LV1_CALL(set_dabr, 2, 0, 96 ) +LV1_CALL(get_total_execution_time, 2, 1, 103 ) +LV1_CALL(construct_io_irq_outlet, 1, 1, 120 ) +LV1_CALL(destruct_io_irq_outlet, 1, 0, 121 ) +LV1_CALL(map_htab, 1, 1, 122 ) +LV1_CALL(unmap_htab, 1, 0, 123 ) +LV1_CALL(get_version_info, 0, 1, 127 ) +LV1_CALL(insert_htab_entry, 6, 3, 158 ) +LV1_CALL(read_virtual_uart, 3, 1, 162 ) +LV1_CALL(write_virtual_uart, 3, 1, 163 ) +LV1_CALL(set_virtual_uart_param, 3, 0, 164 ) +LV1_CALL(get_virtual_uart_param, 2, 1, 165 ) +LV1_CALL(configure_virtual_uart_irq, 1, 1, 166 ) +LV1_CALL(open_device, 3, 0, 170 ) +LV1_CALL(close_device, 2, 0, 171 ) +LV1_CALL(map_device_mmio_region, 5, 1, 172 ) +LV1_CALL(unmap_device_mmio_region, 3, 0, 173 ) +LV1_CALL(allocate_device_dma_region, 5, 1, 174 ) +LV1_CALL(free_device_dma_region, 3, 0, 175 ) +LV1_CALL(map_device_dma_region, 6, 0, 176 ) +LV1_CALL(unmap_device_dma_region, 4, 0, 177 ) +LV1_CALL(net_add_multicast_address, 4, 0, 185 ) +LV1_CALL(net_remove_multicast_address, 4, 0, 186 ) +LV1_CALL(net_start_tx_dma, 4, 0, 187 ) +LV1_CALL(net_stop_tx_dma, 3, 0, 188 ) +LV1_CALL(net_start_rx_dma, 4, 0, 189 ) +LV1_CALL(net_stop_rx_dma, 3, 0, 190 ) +LV1_CALL(net_set_interrupt_status_indicator, 4, 0, 191 ) +LV1_CALL(net_set_interrupt_mask, 4, 0, 193 ) +LV1_CALL(net_control, 6, 2, 194 ) +LV1_CALL(connect_interrupt_event_receive_port, 4, 0, 197 ) +LV1_CALL(disconnect_interrupt_event_receive_port, 4, 0, 198 ) +LV1_CALL(get_spe_all_interrupt_statuses, 1, 1, 199 ) +LV1_CALL(deconfigure_virtual_uart_irq, 0, 0, 202 ) +LV1_CALL(enable_logical_spe, 2, 0, 207 ) +LV1_CALL(gpu_open, 1, 0, 210 ) +LV1_CALL(gpu_close, 0, 0, 211 ) +LV1_CALL(gpu_device_map, 1, 2, 212 ) +LV1_CALL(gpu_device_unmap, 1, 0, 213 ) +LV1_CALL(gpu_memory_allocate, 5, 2, 214 ) +LV1_CALL(gpu_memory_free, 1, 0, 216 ) +LV1_CALL(gpu_context_allocate, 2, 5, 217 ) +LV1_CALL(gpu_context_free, 1, 0, 218 ) +LV1_CALL(gpu_context_iomap, 5, 0, 221 ) +LV1_CALL(gpu_context_attribute, 6, 0, 225 ) +LV1_CALL(gpu_context_intr, 1, 1, 227 ) +LV1_CALL(gpu_attribute, 5, 0, 228 ) +LV1_CALL(get_rtc, 0, 2, 232 ) +LV1_CALL(set_ppe_periodic_tracer_frequency, 1, 0, 240 ) +LV1_CALL(start_ppe_periodic_tracer, 5, 0, 241 ) +LV1_CALL(stop_ppe_periodic_tracer, 1, 1, 242 ) +LV1_CALL(storage_read, 6, 1, 245 ) +LV1_CALL(storage_write, 6, 1, 246 ) +LV1_CALL(storage_send_device_command, 6, 1, 248 ) +LV1_CALL(storage_get_async_status, 1, 2, 249 ) +LV1_CALL(storage_check_async_status, 2, 1, 254 ) +LV1_CALL(panic, 1, 0, 255 ) +LV1_CALL(construct_lpm, 6, 3, 140 ) +LV1_CALL(destruct_lpm, 1, 0, 141 ) +LV1_CALL(start_lpm, 1, 0, 142 ) +LV1_CALL(stop_lpm, 1, 1, 143 ) +LV1_CALL(copy_lpm_trace_buffer, 3, 1, 144 ) +LV1_CALL(add_lpm_event_bookmark, 5, 0, 145 ) +LV1_CALL(delete_lpm_event_bookmark, 3, 0, 146 ) +LV1_CALL(set_lpm_interrupt_mask, 3, 1, 147 ) +LV1_CALL(get_lpm_interrupt_status, 1, 1, 148 ) +LV1_CALL(set_lpm_general_control, 5, 2, 149 ) +LV1_CALL(set_lpm_interval, 3, 1, 150 ) +LV1_CALL(set_lpm_trigger_control, 3, 1, 151 ) +LV1_CALL(set_lpm_counter_control, 4, 1, 152 ) +LV1_CALL(set_lpm_group_control, 3, 1, 153 ) +LV1_CALL(set_lpm_debug_bus_control, 3, 1, 154 ) +LV1_CALL(set_lpm_counter, 5, 2, 155 ) +LV1_CALL(set_lpm_signal, 7, 0, 156 ) +LV1_CALL(set_lpm_spr_trigger, 2, 0, 157 ) + +#endif -- cgit v1.2.3-70-g09d2 From c6cec72b7ca05822688a952df97b1c24e69a0ef6 Mon Sep 17 00:00:00 2001 From: Geoff Levand Date: Thu, 23 Nov 2006 00:46:54 +0100 Subject: [POWERPC] ps3: add htab routines Adds pagetable management routines for the PS3. Signed-off-by: Geoff Levand Signed-off-by: Arnd Bergmann --- arch/powerpc/platforms/ps3/htab.c | 277 ++++++++++++++++++++++++++++++++++++++ 1 file changed, 277 insertions(+) create mode 100644 arch/powerpc/platforms/ps3/htab.c (limited to 'arch/powerpc') diff --git a/arch/powerpc/platforms/ps3/htab.c b/arch/powerpc/platforms/ps3/htab.c new file mode 100644 index 00000000000..8fe1769655a --- /dev/null +++ b/arch/powerpc/platforms/ps3/htab.c @@ -0,0 +1,277 @@ +/* + * PS3 pagetable management routines. + * + * Copyright (C) 2006 Sony Computer Entertainment Inc. + * Copyright 2006 Sony Corp. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include + +#include +#include +#include +#include +#include + +#include "platform.h" + +#if defined(DEBUG) +#define DBG(fmt...) udbg_printf(fmt) +#else +#define DBG(fmt...) do{if(0)printk(fmt);}while(0) +#endif + +static hpte_t *htab; +static unsigned long htab_addr; +static unsigned char *bolttab; +static unsigned char *inusetab; + +static spinlock_t ps3_bolttab_lock = SPIN_LOCK_UNLOCKED; + +#define debug_dump_hpte(_a, _b, _c, _d, _e, _f, _g) \ + _debug_dump_hpte(_a, _b, _c, _d, _e, _f, _g, __func__, __LINE__) +static void _debug_dump_hpte(unsigned long pa, unsigned long va, + unsigned long group, unsigned long bitmap, hpte_t lhpte, int psize, + unsigned long slot, const char* func, int line) +{ + DBG("%s:%d: pa = %lxh\n", func, line, pa); + DBG("%s:%d: lpar = %lxh\n", func, line, + ps3_mm_phys_to_lpar(pa)); + DBG("%s:%d: va = %lxh\n", func, line, va); + DBG("%s:%d: group = %lxh\n", func, line, group); + DBG("%s:%d: bitmap = %lxh\n", func, line, bitmap); + DBG("%s:%d: hpte.v = %lxh\n", func, line, lhpte.v); + DBG("%s:%d: hpte.r = %lxh\n", func, line, lhpte.r); + DBG("%s:%d: psize = %xh\n", func, line, psize); + DBG("%s:%d: slot = %lxh\n", func, line, slot); +} + +static long ps3_hpte_insert(unsigned long hpte_group, unsigned long va, + unsigned long pa, unsigned long rflags, unsigned long vflags, int psize) +{ + unsigned long slot; + hpte_t lhpte; + int secondary = 0; + unsigned long result; + unsigned long bitmap; + unsigned long flags; + unsigned long p_pteg, s_pteg, b_index, b_mask, cb, ci; + + vflags &= ~HPTE_V_SECONDARY; /* this bit is ignored */ + + lhpte.v = hpte_encode_v(va, psize) | vflags | HPTE_V_VALID; + lhpte.r = hpte_encode_r(ps3_mm_phys_to_lpar(pa), psize) | rflags; + + p_pteg = hpte_group / HPTES_PER_GROUP; + s_pteg = ~p_pteg & htab_hash_mask; + + spin_lock_irqsave(&ps3_bolttab_lock, flags); + + BUG_ON(bolttab[p_pteg] == 0xff && bolttab[s_pteg] == 0xff); + + bitmap = (inusetab[p_pteg] << 8) | inusetab[s_pteg]; + + if (bitmap == 0xffff) { + /* + * PTEG is full. Search for victim. + */ + bitmap &= ~((bolttab[p_pteg] << 8) | bolttab[s_pteg]); + do { + ci = mftb() & 15; + cb = 0x8000UL >> ci; + } while ((cb & bitmap) == 0); + } else { + /* + * search free slot in hardware order + * [primary] 0, 2, 4, 6, 1, 3, 5, 7 + * [secondary] 0, 2, 4, 6, 1, 3, 5, 7 + */ + for (ci = 0; ci < HPTES_PER_GROUP; ci += 2) { + cb = 0x8000UL >> ci; + if ((cb & bitmap) == 0) + goto found; + } + for (ci = 1; ci < HPTES_PER_GROUP; ci += 2) { + cb = 0x8000UL >> ci; + if ((cb & bitmap) == 0) + goto found; + } + for (ci = HPTES_PER_GROUP; ci < HPTES_PER_GROUP*2; ci += 2) { + cb = 0x8000UL >> ci; + if ((cb & bitmap) == 0) + goto found; + } + for (ci = HPTES_PER_GROUP+1; ci < HPTES_PER_GROUP*2; ci += 2) { + cb = 0x8000UL >> ci; + if ((cb & bitmap) == 0) + goto found; + } + } + +found: + if (ci < HPTES_PER_GROUP) { + slot = p_pteg * HPTES_PER_GROUP + ci; + } else { + slot = s_pteg * HPTES_PER_GROUP + (ci & 7); + /* lhpte.dw0.dw0.h = 1; */ + vflags |= HPTE_V_SECONDARY; + lhpte.v |= HPTE_V_SECONDARY; + } + + result = lv1_write_htab_entry(0, slot, lhpte.v, lhpte.r); + + if (result) { + debug_dump_hpte(pa, va, hpte_group, bitmap, lhpte, psize, slot); + BUG(); + } + + /* + * If used slot is not in primary HPTE group, + * the slot should be in secondary HPTE group. + */ + + if ((hpte_group ^ slot) & ~(HPTES_PER_GROUP - 1)) { + secondary = 1; + b_index = s_pteg; + } else { + secondary = 0; + b_index = p_pteg; + } + + b_mask = (lhpte.v & HPTE_V_BOLTED) ? 1 << 7 : 0 << 7; + bolttab[b_index] |= b_mask >> (slot & 7); + b_mask = 1 << 7; + inusetab[b_index] |= b_mask >> (slot & 7); + spin_unlock_irqrestore(&ps3_bolttab_lock, flags); + + return (slot & 7) | (secondary << 3); +} + +static long ps3_hpte_remove(unsigned long hpte_group) +{ + panic("ps3_hpte_remove() not implemented"); + return 0; +} + +static long ps3_hpte_updatepp(unsigned long slot, unsigned long newpp, + unsigned long va, int psize, int local) +{ + unsigned long flags; + unsigned long result; + unsigned long pteg, bit; + unsigned long hpte_v, want_v; + + want_v = hpte_encode_v(va, psize); + + spin_lock_irqsave(&ps3_bolttab_lock, flags); + + hpte_v = htab[slot].v; + if (!HPTE_V_COMPARE(hpte_v, want_v) || !(hpte_v & HPTE_V_VALID)) { + spin_unlock_irqrestore(&ps3_bolttab_lock, flags); + + /* ps3_hpte_insert() will be used to update PTE */ + return -1; + } + + result = lv1_write_htab_entry(0, slot, 0, 0); + + if (result) { + DBG("%s: va=%lx slot=%lx psize=%d result = %ld (0x%lx)\n", + __func__, va, slot, psize, result, result); + BUG(); + } + + pteg = slot / HPTES_PER_GROUP; + bit = slot % HPTES_PER_GROUP; + inusetab[pteg] &= ~(0x80 >> bit); + + spin_unlock_irqrestore(&ps3_bolttab_lock, flags); + + /* ps3_hpte_insert() will be used to update PTE */ + return -1; +} + +static void ps3_hpte_updateboltedpp(unsigned long newpp, unsigned long ea, + int psize) +{ + panic("ps3_hpte_updateboltedpp() not implemented"); +} + +static void ps3_hpte_invalidate(unsigned long slot, unsigned long va, + int psize, int local) +{ + unsigned long flags; + unsigned long result; + unsigned long pteg, bit; + + spin_lock_irqsave(&ps3_bolttab_lock, flags); + result = lv1_write_htab_entry(0, slot, 0, 0); + + if (result) { + DBG("%s: va=%lx slot=%lx psize=%d result = %ld (0x%lx)\n", + __func__, va, slot, psize, result, result); + BUG(); + } + + pteg = slot / HPTES_PER_GROUP; + bit = slot % HPTES_PER_GROUP; + inusetab[pteg] &= ~(0x80 >> bit); + spin_unlock_irqrestore(&ps3_bolttab_lock, flags); +} + +static void ps3_hpte_clear(void) +{ + lv1_unmap_htab(htab_addr); +} + +void __init ps3_hpte_init(unsigned long htab_size) +{ + long bitmap_size; + + DBG(" -> %s:%d\n", __func__, __LINE__); + + ppc_md.hpte_invalidate = ps3_hpte_invalidate; + ppc_md.hpte_updatepp = ps3_hpte_updatepp; + ppc_md.hpte_updateboltedpp = ps3_hpte_updateboltedpp; + ppc_md.hpte_insert = ps3_hpte_insert; + ppc_md.hpte_remove = ps3_hpte_remove; + ppc_md.hpte_clear_all = ps3_hpte_clear; + + ppc64_pft_size = __ilog2(htab_size); + + bitmap_size = htab_size / sizeof(hpte_t) / 8; + + bolttab = __va(lmb_alloc(bitmap_size, 1)); + inusetab = __va(lmb_alloc(bitmap_size, 1)); + + memset(bolttab, 0, bitmap_size); + memset(inusetab, 0, bitmap_size); + + DBG(" <- %s:%d\n", __func__, __LINE__); +} + +void __init ps3_map_htab(void) +{ + long result; + unsigned long htab_size = (1UL << ppc64_pft_size); + + result = lv1_map_htab(0, &htab_addr); + + htab = (hpte_t *)__ioremap(htab_addr, htab_size, PAGE_READONLY_X); + + DBG("%s:%d: lpar %016lxh, virt %016lxh\n", __func__, __LINE__, + htab_addr, (unsigned long)htab); +} -- cgit v1.2.3-70-g09d2 From 6e74b38a7ffa6b69f287ae629aae91e725916e6f Mon Sep 17 00:00:00 2001 From: Geoff Levand Date: Thu, 23 Nov 2006 00:46:55 +0100 Subject: [POWERPC] ps3: add repository support Adds support for the PS3 repository. Signed-off-by: Geoff Levand Signed-off-by: Arnd Bergmann --- arch/powerpc/platforms/ps3/repository.c | 840 ++++++++++++++++++++++++++++++++ include/asm-powerpc/ps3.h | 139 ++++++ 2 files changed, 979 insertions(+) create mode 100644 arch/powerpc/platforms/ps3/repository.c (limited to 'arch/powerpc') diff --git a/arch/powerpc/platforms/ps3/repository.c b/arch/powerpc/platforms/ps3/repository.c new file mode 100644 index 00000000000..273a0d621bd --- /dev/null +++ b/arch/powerpc/platforms/ps3/repository.c @@ -0,0 +1,840 @@ +/* + * PS3 repository routines. + * + * Copyright (C) 2006 Sony Computer Entertainment Inc. + * Copyright 2006 Sony Corp. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include +#include + +enum ps3_vendor_id { + PS3_VENDOR_ID_NONE = 0, + PS3_VENDOR_ID_SONY = 0x8000000000000000UL, +}; + +enum ps3_lpar_id { + PS3_LPAR_ID_CURRENT = 0, + PS3_LPAR_ID_PME = 1, +}; + +#define dump_field(_a, _b) _dump_field(_a, _b, __func__, __LINE__) +static void _dump_field(const char *hdr, u64 n, const char* func, int line) +{ +#if defined(DEBUG) + char s[16]; + const char *const in = (const char *)&n; + unsigned int i; + + for (i = 0; i < 8; i++) + s[i] = (in[i] <= 126 && in[i] >= 32) ? in[i] : '.'; + s[i] = 0; + + pr_debug("%s:%d: %s%016lx : %s\n", func, line, hdr, n, s); +#endif +} + +#define dump_node_name(_a, _b, _c, _d, _e) \ + _dump_node_name(_a, _b, _c, _d, _e, __func__, __LINE__) +static void _dump_node_name (unsigned int lpar_id, u64 n1, u64 n2, u64 n3, + u64 n4, const char* func, int line) +{ + pr_debug("%s:%d: lpar: %u\n", func, line, lpar_id); + _dump_field("n1: ", n1, func, line); + _dump_field("n2: ", n2, func, line); + _dump_field("n3: ", n3, func, line); + _dump_field("n4: ", n4, func, line); +} + +#define dump_node(_a, _b, _c, _d, _e, _f, _g) \ + _dump_node(_a, _b, _c, _d, _e, _f, _g, __func__, __LINE__) +static void _dump_node(unsigned int lpar_id, u64 n1, u64 n2, u64 n3, u64 n4, + u64 v1, u64 v2, const char* func, int line) +{ + pr_debug("%s:%d: lpar: %u\n", func, line, lpar_id); + _dump_field("n1: ", n1, func, line); + _dump_field("n2: ", n2, func, line); + _dump_field("n3: ", n3, func, line); + _dump_field("n4: ", n4, func, line); + pr_debug("%s:%d: v1: %016lx\n", func, line, v1); + pr_debug("%s:%d: v2: %016lx\n", func, line, v2); +} + +/** + * make_first_field - Make the first field of a repository node name. + * @text: Text portion of the field. + * @index: Numeric index portion of the field. Use zero for 'don't care'. + * + * This routine sets the vendor id to zero (non-vendor specific). + * Returns field value. + */ + +static u64 make_first_field(const char *text, u64 index) +{ + u64 n; + + strncpy((char *)&n, text, 8); + return PS3_VENDOR_ID_NONE + (n >> 32) + index; +} + +/** + * make_field - Make subsequent fields of a repository node name. + * @text: Text portion of the field. Use "" for 'don't care'. + * @index: Numeric index portion of the field. Use zero for 'don't care'. + * + * Returns field value. + */ + +static u64 make_field(const char *text, u64 index) +{ + u64 n; + + strncpy((char *)&n, text, 8); + return n + index; +} + +/** + * read_node - Read a repository node from raw fields. + * @n1: First field of node name. + * @n2: Second field of node name. Use zero for 'don't care'. + * @n3: Third field of node name. Use zero for 'don't care'. + * @n4: Fourth field of node name. Use zero for 'don't care'. + * @v1: First repository value (high word). + * @v2: Second repository value (low word). Optional parameter, use zero + * for 'don't care'. + */ + +static int read_node(unsigned int lpar_id, u64 n1, u64 n2, u64 n3, u64 n4, + u64 *_v1, u64 *_v2) +{ + int result; + u64 v1; + u64 v2; + + if (lpar_id == PS3_LPAR_ID_CURRENT) { + u64 id; + lv1_get_logical_partition_id(&id); + lpar_id = id; + } + + result = lv1_get_repository_node_value(lpar_id, n1, n2, n3, n4, &v1, + &v2); + + if (result) { + pr_debug("%s:%d: lv1_get_repository_node_value failed: %s\n", + __func__, __LINE__, ps3_result(result)); + dump_node_name(lpar_id, n1, n2, n3, n4); + return result; + } + + dump_node(lpar_id, n1, n2, n3, n4, v1, v2); + + if (_v1) + *_v1 = v1; + if (_v2) + *_v2 = v2; + + if (v1 && !_v1) + pr_debug("%s:%d: warning: discarding non-zero v1: %016lx\n", + __func__, __LINE__, v1); + if (v2 && !_v2) + pr_debug("%s:%d: warning: discarding non-zero v2: %016lx\n", + __func__, __LINE__, v2); + + return result; +} + +int ps3_repository_read_bus_str(unsigned int bus_index, const char *bus_str, + u64 *value) +{ + return read_node(PS3_LPAR_ID_PME, + make_first_field("bus", bus_index), + make_field(bus_str, 0), + 0, 0, + value, 0); +} + +int ps3_repository_read_bus_id(unsigned int bus_index, unsigned int *bus_id) +{ + int result; + u64 v1; + u64 v2; /* unused */ + + result = read_node(PS3_LPAR_ID_PME, + make_first_field("bus", bus_index), + make_field("id", 0), + 0, 0, + &v1, &v2); + *bus_id = v1; + return result; +} + +int ps3_repository_read_bus_type(unsigned int bus_index, + enum ps3_bus_type *bus_type) +{ + int result; + u64 v1; + + result = read_node(PS3_LPAR_ID_PME, + make_first_field("bus", bus_index), + make_field("type", 0), + 0, 0, + &v1, 0); + *bus_type = v1; + return result; +} + +int ps3_repository_read_bus_num_dev(unsigned int bus_index, + unsigned int *num_dev) +{ + int result; + u64 v1; + + result = read_node(PS3_LPAR_ID_PME, + make_first_field("bus", bus_index), + make_field("num_dev", 0), + 0, 0, + &v1, 0); + *num_dev = v1; + return result; +} + +int ps3_repository_read_dev_str(unsigned int bus_index, + unsigned int dev_index, const char *dev_str, u64 *value) +{ + return read_node(PS3_LPAR_ID_PME, + make_first_field("bus", bus_index), + make_field("dev", dev_index), + make_field(dev_str, 0), + 0, + value, 0); +} + +int ps3_repository_read_dev_id(unsigned int bus_index, unsigned int dev_index, + unsigned int *dev_id) +{ + int result; + u64 v1; + + result = read_node(PS3_LPAR_ID_PME, + make_first_field("bus", bus_index), + make_field("dev", dev_index), + make_field("id", 0), + 0, + &v1, 0); + *dev_id = v1; + return result; +} + +int ps3_repository_read_dev_type(unsigned int bus_index, + unsigned int dev_index, enum ps3_dev_type *dev_type) +{ + int result; + u64 v1; + + result = read_node(PS3_LPAR_ID_PME, + make_first_field("bus", bus_index), + make_field("dev", dev_index), + make_field("type", 0), + 0, + &v1, 0); + *dev_type = v1; + return result; +} + +int ps3_repository_read_dev_intr(unsigned int bus_index, + unsigned int dev_index, unsigned int intr_index, + unsigned int *intr_type, unsigned int* interrupt_id) +{ + int result; + u64 v1; + u64 v2; + + result = read_node(PS3_LPAR_ID_PME, + make_first_field("bus", bus_index), + make_field("dev", dev_index), + make_field("intr", intr_index), + 0, + &v1, &v2); + *intr_type = v1; + *interrupt_id = v2; + return result; +} + +int ps3_repository_read_dev_reg_type(unsigned int bus_index, + unsigned int dev_index, unsigned int reg_index, unsigned int *reg_type) +{ + int result; + u64 v1; + + result = read_node(PS3_LPAR_ID_PME, + make_first_field("bus", bus_index), + make_field("dev", dev_index), + make_field("reg", reg_index), + make_field("type", 0), + &v1, 0); + *reg_type = v1; + return result; +} + +int ps3_repository_read_dev_reg_addr(unsigned int bus_index, + unsigned int dev_index, unsigned int reg_index, u64 *bus_addr, u64 *len) +{ + return read_node(PS3_LPAR_ID_PME, + make_first_field("bus", bus_index), + make_field("dev", dev_index), + make_field("reg", reg_index), + make_field("data", 0), + bus_addr, len); +} + +int ps3_repository_read_dev_reg(unsigned int bus_index, + unsigned int dev_index, unsigned int reg_index, unsigned int *reg_type, + u64 *bus_addr, u64 *len) +{ + int result = ps3_repository_read_dev_reg_type(bus_index, dev_index, + reg_index, reg_type); + return result ? result + : ps3_repository_read_dev_reg_addr(bus_index, dev_index, + reg_index, bus_addr, len); +} + +#if defined(DEBUG) +int ps3_repository_dump_resource_info(unsigned int bus_index, + unsigned int dev_index) +{ + int result = 0; + unsigned int res_index; + + pr_debug(" -> %s:%d: (%u:%u)\n", __func__, __LINE__, + bus_index, dev_index); + + for (res_index = 0; res_index < 10; res_index++) { + enum ps3_interrupt_type intr_type; + unsigned int interrupt_id; + + result = ps3_repository_read_dev_intr(bus_index, dev_index, + res_index, &intr_type, &interrupt_id); + + if (result) { + if (result != LV1_NO_ENTRY) + pr_debug("%s:%d ps3_repository_read_dev_intr" + " (%u:%u) failed\n", __func__, __LINE__, + bus_index, dev_index); + break; + } + + pr_debug("%s:%d (%u:%u) intr_type %u, interrupt_id %u\n", + __func__, __LINE__, bus_index, dev_index, intr_type, + interrupt_id); + } + + for (res_index = 0; res_index < 10; res_index++) { + enum ps3_region_type reg_type; + u64 bus_addr; + u64 len; + + result = ps3_repository_read_dev_reg(bus_index, dev_index, + res_index, ®_type, &bus_addr, &len); + + if (result) { + if (result != LV1_NO_ENTRY) + pr_debug("%s:%d ps3_repository_read_dev_reg" + " (%u:%u) failed\n", __func__, __LINE__, + bus_index, dev_index); + break; + } + + pr_debug("%s:%d (%u:%u) reg_type %u, bus_addr %lxh, len %lxh\n", + __func__, __LINE__, bus_index, dev_index, reg_type, + bus_addr, len); + } + + pr_debug(" <- %s:%d\n", __func__, __LINE__); + return result; +} + +static int dump_device_info(unsigned int bus_index, unsigned int num_dev) +{ + int result = 0; + unsigned int dev_index; + + pr_debug(" -> %s:%d: bus_%u\n", __func__, __LINE__, bus_index); + + for (dev_index = 0; dev_index < num_dev; dev_index++) { + enum ps3_dev_type dev_type; + unsigned int dev_id; + + result = ps3_repository_read_dev_type(bus_index, dev_index, + &dev_type); + + if (result) { + pr_debug("%s:%d ps3_repository_read_dev_type" + " (%u:%u) failed\n", __func__, __LINE__, + bus_index, dev_index); + break; + } + + result = ps3_repository_read_dev_id(bus_index, dev_index, + &dev_id); + + if (result) { + pr_debug("%s:%d ps3_repository_read_dev_id" + " (%u:%u) failed\n", __func__, __LINE__, + bus_index, dev_index); + continue; + } + + pr_debug("%s:%d (%u:%u): dev_type %u, dev_id %u\n", __func__, + __LINE__, bus_index, dev_index, dev_type, dev_id); + + ps3_repository_dump_resource_info(bus_index, dev_index); + } + + pr_debug(" <- %s:%d\n", __func__, __LINE__); + return result; +} + +int ps3_repository_dump_bus_info(void) +{ + int result = 0; + unsigned int bus_index; + + pr_debug(" -> %s:%d\n", __func__, __LINE__); + + for (bus_index = 0; bus_index < 10; bus_index++) { + enum ps3_bus_type bus_type; + unsigned int bus_id; + unsigned int num_dev; + + result = ps3_repository_read_bus_type(bus_index, &bus_type); + + if (result) { + pr_debug("%s:%d read_bus_type(%u) failed\n", + __func__, __LINE__, bus_index); + break; + } + + result = ps3_repository_read_bus_id(bus_index, &bus_id); + + if (result) { + pr_debug("%s:%d read_bus_id(%u) failed\n", + __func__, __LINE__, bus_index); + continue; + } + + if (bus_index != bus_id) + pr_debug("%s:%d bus_index != bus_id\n", + __func__, __LINE__); + + result = ps3_repository_read_bus_num_dev(bus_index, &num_dev); + + if (result) { + pr_debug("%s:%d read_bus_num_dev(%u) failed\n", + __func__, __LINE__, bus_index); + continue; + } + + pr_debug("%s:%d bus_%u: bus_type %u, bus_id %u, num_dev %u\n", + __func__, __LINE__, bus_index, bus_type, bus_id, + num_dev); + + dump_device_info(bus_index, num_dev); + } + + pr_debug(" <- %s:%d\n", __func__, __LINE__); + return result; +} +#endif /* defined(DEBUG) */ + +static int find_device(unsigned int bus_index, unsigned int num_dev, + unsigned int start_dev_index, enum ps3_dev_type dev_type, + struct ps3_repository_device *dev) +{ + int result = 0; + unsigned int dev_index; + + pr_debug("%s:%d: find dev_type %u\n", __func__, __LINE__, dev_type); + + dev->dev_index = UINT_MAX; + + for (dev_index = start_dev_index; dev_index < num_dev; dev_index++) { + enum ps3_dev_type x; + + result = ps3_repository_read_dev_type(bus_index, dev_index, + &x); + + if (result) { + pr_debug("%s:%d read_dev_type failed\n", + __func__, __LINE__); + return result; + } + + if (x == dev_type) + break; + } + + BUG_ON(dev_index == num_dev); + + pr_debug("%s:%d: found dev_type %u at dev_index %u\n", + __func__, __LINE__, dev_type, dev_index); + + result = ps3_repository_read_dev_id(bus_index, dev_index, + &dev->did.dev_id); + + if (result) { + pr_debug("%s:%d read_dev_id failed\n", + __func__, __LINE__); + return result; + } + + dev->dev_index = dev_index; + + pr_debug("%s:%d found: dev_id %u\n", __func__, __LINE__, + dev->did.dev_id); + + return result; +} + +int ps3_repository_find_device (enum ps3_bus_type bus_type, + enum ps3_dev_type dev_type, + const struct ps3_repository_device *start_dev, + struct ps3_repository_device *dev) +{ + int result = 0; + unsigned int bus_index; + unsigned int num_dev; + + pr_debug("%s:%d: find bus_type %u, dev_type %u\n", __func__, __LINE__, + bus_type, dev_type); + + dev->bus_index = UINT_MAX; + + for (bus_index = start_dev ? start_dev->bus_index : 0; bus_index < 10; + bus_index++) { + enum ps3_bus_type x; + + result = ps3_repository_read_bus_type(bus_index, &x); + + if (result) { + pr_debug("%s:%d read_bus_type failed\n", + __func__, __LINE__); + return result; + } + if (x == bus_type) + break; + } + + BUG_ON(bus_index == 10); + + pr_debug("%s:%d: found bus_type %u at bus_index %u\n", + __func__, __LINE__, bus_type, bus_index); + + result = ps3_repository_read_bus_num_dev(bus_index, &num_dev); + + if (result) { + pr_debug("%s:%d read_bus_num_dev failed\n", + __func__, __LINE__); + return result; + } + + result = find_device(bus_index, num_dev, start_dev + ? start_dev->dev_index + 1 : 0, dev_type, dev); + + if (result) { + pr_debug("%s:%d get_did failed\n", __func__, __LINE__); + return result; + } + + result = ps3_repository_read_bus_id(bus_index, &dev->did.bus_id); + + if (result) { + pr_debug("%s:%d read_bus_id failed\n", + __func__, __LINE__); + return result; + } + + dev->bus_index = bus_index; + + pr_debug("%s:%d found: bus_id %u, dev_id %u\n", + __func__, __LINE__, dev->did.bus_id, dev->did.dev_id); + + return result; +} + +int ps3_repository_find_interrupt(const struct ps3_repository_device *dev, + enum ps3_interrupt_type intr_type, unsigned int *interrupt_id) +{ + int result = 0; + unsigned int res_index; + + pr_debug("%s:%d: find intr_type %u\n", __func__, __LINE__, intr_type); + + *interrupt_id = UINT_MAX; + + for (res_index = 0; res_index < 10; res_index++) { + enum ps3_interrupt_type t; + unsigned int id; + + result = ps3_repository_read_dev_intr(dev->bus_index, + dev->dev_index, res_index, &t, &id); + + if (result) { + pr_debug("%s:%d read_dev_intr failed\n", + __func__, __LINE__); + return result; + } + + if (t == intr_type) { + *interrupt_id = id; + break; + } + } + + BUG_ON(res_index == 10); + + pr_debug("%s:%d: found intr_type %u at res_index %u\n", + __func__, __LINE__, intr_type, res_index); + + return result; +} + +int ps3_repository_find_region(const struct ps3_repository_device *dev, + enum ps3_region_type reg_type, u64 *bus_addr, u64 *len) +{ + int result = 0; + unsigned int res_index; + + pr_debug("%s:%d: find reg_type %u\n", __func__, __LINE__, reg_type); + + *bus_addr = *len = 0; + + for (res_index = 0; res_index < 10; res_index++) { + enum ps3_region_type t; + u64 a; + u64 l; + + result = ps3_repository_read_dev_reg(dev->bus_index, + dev->dev_index, res_index, &t, &a, &l); + + if (result) { + pr_debug("%s:%d read_dev_reg failed\n", + __func__, __LINE__); + return result; + } + + if (t == reg_type) { + *bus_addr = a; + *len = l; + break; + } + } + + BUG_ON(res_index == 10); + + pr_debug("%s:%d: found reg_type %u at res_index %u\n", + __func__, __LINE__, reg_type, res_index); + + return result; +} + +int ps3_repository_read_rm_size(unsigned int ppe_id, u64 *rm_size) +{ + return read_node(PS3_LPAR_ID_CURRENT, + make_first_field("bi", 0), + make_field("pu", 0), + ppe_id, + make_field("rm_size", 0), + rm_size, 0); +} + +int ps3_repository_read_region_total(u64 *region_total) +{ + return read_node(PS3_LPAR_ID_CURRENT, + make_first_field("bi", 0), + make_field("rgntotal", 0), + 0, 0, + region_total, 0); +} + +/** + * ps3_repository_read_mm_info - Read mm info for single pu system. + * @rm_base: Real mode memory base address. + * @rm_size: Real mode memory size. + * @region_total: Maximum memory region size. + */ + +int ps3_repository_read_mm_info(u64 *rm_base, u64 *rm_size, u64 *region_total) +{ + int result; + u64 ppe_id; + + lv1_get_logical_ppe_id(&ppe_id); + *rm_base = 0; + result = ps3_repository_read_rm_size(ppe_id, rm_size); + return result ? result + : ps3_repository_read_region_total(region_total); +} + +/** + * ps3_repository_read_num_spu_reserved - Number of physical spus reserved. + * @num_spu: Number of physical spus. + */ + +int ps3_repository_read_num_spu_reserved(unsigned int *num_spu_reserved) +{ + int result; + u64 v1; + + result = read_node(PS3_LPAR_ID_CURRENT, + make_first_field("bi", 0), + make_field("spun", 0), + 0, 0, + &v1, 0); + *num_spu_reserved = v1; + return result; +} + +/** + * ps3_repository_read_num_spu_resource_id - Number of spu resource reservations. + * @num_resource_id: Number of spu resource ids. + */ + +int ps3_repository_read_num_spu_resource_id(unsigned int *num_resource_id) +{ + int result; + u64 v1; + + result = read_node(PS3_LPAR_ID_CURRENT, + make_first_field("bi", 0), + make_field("spursvn", 0), + 0, 0, + &v1, 0); + *num_resource_id = v1; + return result; +} + +/** + * ps3_repository_read_spu_resource_id - spu resource reservation id value. + * @res_index: Resource reservation index. + * @resource_type: Resource reservation type. + * @resource_id: Resource reservation id. + */ + +int ps3_repository_read_spu_resource_id(unsigned int res_index, + enum ps3_spu_resource_type* resource_type, unsigned int *resource_id) +{ + int result; + u64 v1; + u64 v2; + + result = read_node(PS3_LPAR_ID_CURRENT, + make_first_field("bi", 0), + make_field("spursv", 0), + res_index, + 0, + &v1, &v2); + *resource_type = v1; + *resource_id = v2; + return result; +} + +int ps3_repository_read_boot_dat_address(u64 *address) +{ + return read_node(PS3_LPAR_ID_CURRENT, + make_first_field("bi", 0), + make_field("boot_dat", 0), + make_field("address", 0), + 0, + address, 0); +} + +int ps3_repository_read_boot_dat_size(unsigned int *size) +{ + int result; + u64 v1; + + result = read_node(PS3_LPAR_ID_CURRENT, + make_first_field("bi", 0), + make_field("boot_dat", 0), + make_field("size", 0), + 0, + &v1, 0); + *size = v1; + return result; +} + +/** + * ps3_repository_read_boot_dat_info - Get address and size of cell_ext_os_area. + * address: lpar address of cell_ext_os_area + * @size: size of cell_ext_os_area + */ + +int ps3_repository_read_boot_dat_info(u64 *lpar_addr, unsigned int *size) +{ + int result; + + *size = 0; + result = ps3_repository_read_boot_dat_address(lpar_addr); + return result ? result + : ps3_repository_read_boot_dat_size(size); +} + +int ps3_repository_read_num_be(unsigned int *num_be) +{ + int result; + u64 v1; + + result = read_node(PS3_LPAR_ID_PME, + make_first_field("ben", 0), + 0, + 0, + 0, + &v1, 0); + *num_be = v1; + return result; +} + +int ps3_repository_read_be_node_id(unsigned int be_index, u64 *node_id) +{ + return read_node(PS3_LPAR_ID_PME, + make_first_field("be", be_index), + 0, + 0, + 0, + node_id, 0); +} + +int ps3_repository_read_tb_freq(u64 node_id, u64 *tb_freq) +{ + return read_node(PS3_LPAR_ID_PME, + make_first_field("be", 0), + node_id, + make_field("clock", 0), + 0, + tb_freq, 0); +} + +int ps3_repository_read_be_tb_freq(unsigned int be_index, u64 *tb_freq) +{ + int result; + u64 node_id; + + *tb_freq = 0; + result = ps3_repository_read_be_node_id(0, &node_id); + return result ? result + : ps3_repository_read_tb_freq(node_id, tb_freq); +} diff --git a/include/asm-powerpc/ps3.h b/include/asm-powerpc/ps3.h index d0109ffac50..eb4bbb6cff5 100644 --- a/include/asm-powerpc/ps3.h +++ b/include/asm-powerpc/ps3.h @@ -247,4 +247,143 @@ static inline const char* ps3_result(int result) #endif } +/* repository bus info */ + +enum ps3_bus_type { + PS3_BUS_TYPE_SB = 4, + PS3_BUS_TYPE_STORAGE = 5, +}; + +enum ps3_dev_type { + PS3_DEV_TYPE_SB_GELIC = 3, + PS3_DEV_TYPE_SB_USB = 4, + PS3_DEV_TYPE_SB_GPIO = 6, +}; + +int ps3_repository_read_bus_str(unsigned int bus_index, const char *bus_str, + u64 *value); +int ps3_repository_read_bus_id(unsigned int bus_index, unsigned int *bus_id); +int ps3_repository_read_bus_type(unsigned int bus_index, + enum ps3_bus_type *bus_type); +int ps3_repository_read_bus_num_dev(unsigned int bus_index, + unsigned int *num_dev); + +/* repository bus device info */ + +enum ps3_interrupt_type { + PS3_INTERRUPT_TYPE_EVENT_PORT = 2, + PS3_INTERRUPT_TYPE_SB_OHCI = 3, + PS3_INTERRUPT_TYPE_SB_EHCI = 4, + PS3_INTERRUPT_TYPE_OTHER = 5, +}; + +enum ps3_region_type { + PS3_REGION_TYPE_SB_OHCI = 3, + PS3_REGION_TYPE_SB_EHCI = 4, + PS3_REGION_TYPE_SB_GPIO = 5, +}; + +int ps3_repository_read_dev_str(unsigned int bus_index, + unsigned int dev_index, const char *dev_str, u64 *value); +int ps3_repository_read_dev_id(unsigned int bus_index, unsigned int dev_index, + unsigned int *dev_id); +int ps3_repository_read_dev_type(unsigned int bus_index, + unsigned int dev_index, enum ps3_dev_type *dev_type); +int ps3_repository_read_dev_intr(unsigned int bus_index, + unsigned int dev_index, unsigned int intr_index, + enum ps3_interrupt_type *intr_type, unsigned int *interrupt_id); +int ps3_repository_read_dev_reg_type(unsigned int bus_index, + unsigned int dev_index, unsigned int reg_index, + enum ps3_region_type *reg_type); +int ps3_repository_read_dev_reg_addr(unsigned int bus_index, + unsigned int dev_index, unsigned int reg_index, u64 *bus_addr, + u64 *len); +int ps3_repository_read_dev_reg(unsigned int bus_index, + unsigned int dev_index, unsigned int reg_index, + enum ps3_region_type *reg_type, u64 *bus_addr, u64 *len); + +/* repository bus enumerators */ + +struct ps3_repository_device { + unsigned int bus_index; + unsigned int dev_index; + struct ps3_device_id did; +}; + +int ps3_repository_find_device(enum ps3_bus_type bus_type, + enum ps3_dev_type dev_type, + const struct ps3_repository_device *start_dev, + struct ps3_repository_device *dev); +static inline int ps3_repository_find_first_device( + enum ps3_bus_type bus_type, enum ps3_dev_type dev_type, + struct ps3_repository_device *dev) +{ + return ps3_repository_find_device(bus_type, dev_type, NULL, dev); +} +int ps3_repository_find_interrupt(const struct ps3_repository_device *dev, + enum ps3_interrupt_type intr_type, unsigned int *interrupt_id); +int ps3_repository_find_region(const struct ps3_repository_device *dev, + enum ps3_region_type reg_type, u64 *bus_addr, u64 *len); + +/* repository block device info */ + +int ps3_repository_read_dev_port(unsigned int bus_index, + unsigned int dev_index, u64 *port); +int ps3_repository_read_dev_blk_size(unsigned int bus_index, + unsigned int dev_index, u64 *blk_size); +int ps3_repository_read_dev_num_blocks(unsigned int bus_index, + unsigned int dev_index, u64 *num_blocks); +int ps3_repository_read_dev_num_regions(unsigned int bus_index, + unsigned int dev_index, unsigned int *num_regions); +int ps3_repository_read_dev_region_id(unsigned int bus_index, + unsigned int dev_index, unsigned int region_index, + unsigned int *region_id); +int ps3_repository_read_dev_region_size(unsigned int bus_index, + unsigned int dev_index, unsigned int region_index, u64 *region_size); +int ps3_repository_read_dev_region_start(unsigned int bus_index, + unsigned int dev_index, unsigned int region_index, u64 *region_start); + +/* repository pu and memory info */ + +int ps3_repository_read_num_pu(unsigned int *num_pu); +int ps3_repository_read_ppe_id(unsigned int *pu_index, unsigned int *ppe_id); +int ps3_repository_read_rm_base(unsigned int ppe_id, u64 *rm_base); +int ps3_repository_read_rm_size(unsigned int ppe_id, u64 *rm_size); +int ps3_repository_read_region_total(u64 *region_total); +int ps3_repository_read_mm_info(u64 *rm_base, u64 *rm_size, + u64 *region_total); + +/* repository pme info */ + +int ps3_repository_read_num_be(unsigned int *num_be); +int ps3_repository_read_be_node_id(unsigned int be_index, u64 *node_id); +int ps3_repository_read_tb_freq(u64 node_id, u64 *tb_freq); +int ps3_repository_read_be_tb_freq(unsigned int be_index, u64 *tb_freq); + +/* repository 'Other OS' area */ + +int ps3_repository_read_boot_dat_addr(u64 *lpar_addr); +int ps3_repository_read_boot_dat_size(unsigned int *size); +int ps3_repository_read_boot_dat_info(u64 *lpar_addr, unsigned int *size); + +/* repository spu info */ + +/** + * enum spu_resource_type - Type of spu resource. + * @spu_resource_type_shared: Logical spu is shared with other partions. + * @spu_resource_type_exclusive: Logical spu is not shared with other partions. + * + * Returned by ps3_repository_read_spu_resource_id(). + */ + +enum ps3_spu_resource_type { + PS3_SPU_RESOURCE_TYPE_SHARED = 0, + PS3_SPU_RESOURCE_TYPE_EXCLUSIVE = 0x8000000000000000UL, +}; + +int ps3_repository_read_num_spu_reserved(unsigned int *num_spu_reserved); +int ps3_repository_read_num_spu_resource_id(unsigned int *num_resource_id); +int ps3_repository_read_spu_resource_id(unsigned int res_index, + enum ps3_spu_resource_type* resource_type, unsigned int *resource_id); + #endif -- cgit v1.2.3-70-g09d2 From 2832a81df7f3cb7e7f912a256c156ddbd3450265 Mon Sep 17 00:00:00 2001 From: Geoff Levand Date: Thu, 23 Nov 2006 00:46:56 +0100 Subject: [POWERPC] ps3: add interrupt support Adds routines to interface with the PS3 interrupt services. Signed-off-by: Geoff Levand Signed-off-by: Arnd Bergmann --- arch/powerpc/platforms/ps3/interrupt.c | 575 +++++++++++++++++++++++++++++++++ 1 file changed, 575 insertions(+) create mode 100644 arch/powerpc/platforms/ps3/interrupt.c (limited to 'arch/powerpc') diff --git a/arch/powerpc/platforms/ps3/interrupt.c b/arch/powerpc/platforms/ps3/interrupt.c new file mode 100644 index 00000000000..056c1e4141b --- /dev/null +++ b/arch/powerpc/platforms/ps3/interrupt.c @@ -0,0 +1,575 @@ +/* + * PS3 interrupt routines. + * + * Copyright (C) 2006 Sony Computer Entertainment Inc. + * Copyright 2006 Sony Corp. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include +#include +#include + +#include +#include +#include +#include + +#include "platform.h" + +#if defined(DEBUG) +#define DBG(fmt...) udbg_printf(fmt) +#else +#define DBG(fmt...) do{if(0)printk(fmt);}while(0) +#endif + +/** + * ps3_alloc_io_irq - Assign a virq to a system bus device. + * interrupt_id: The device interrupt id read from the system repository. + * @virq: The assigned Linux virq. + * + * An io irq represents a non-virtualized device interrupt. interrupt_id + * coresponds to the interrupt number of the interrupt controller. + */ + +int ps3_alloc_io_irq(unsigned int interrupt_id, unsigned int *virq) +{ + int result; + unsigned long outlet; + + result = lv1_construct_io_irq_outlet(interrupt_id, &outlet); + + if (result) { + pr_debug("%s:%d: lv1_construct_io_irq_outlet failed: %s\n", + __func__, __LINE__, ps3_result(result)); + return result; + } + + *virq = irq_create_mapping(NULL, outlet); + + pr_debug("%s:%d: interrupt_id %u => outlet %lu, virq %u\n", + __func__, __LINE__, interrupt_id, outlet, *virq); + + return 0; +} + +int ps3_free_io_irq(unsigned int virq) +{ + int result; + + result = lv1_destruct_io_irq_outlet(virq_to_hw(virq)); + + if (!result) + pr_debug("%s:%d: lv1_destruct_io_irq_outlet failed: %s\n", + __func__, __LINE__, ps3_result(result)); + + irq_dispose_mapping(virq); + + return result; +} + +/** + * ps3_alloc_event_irq - Allocate a virq for use with a system event. + * @virq: The assigned Linux virq. + * + * The virq can be used with lv1_connect_interrupt_event_receive_port() to + * arrange to receive events, or with ps3_send_event_locally() to signal + * events. + */ + +int ps3_alloc_event_irq(unsigned int *virq) +{ + int result; + unsigned long outlet; + + result = lv1_construct_event_receive_port(&outlet); + + if (result) { + pr_debug("%s:%d: lv1_construct_event_receive_port failed: %s\n", + __func__, __LINE__, ps3_result(result)); + *virq = NO_IRQ; + return result; + } + + *virq = irq_create_mapping(NULL, outlet); + + pr_debug("%s:%d: outlet %lu, virq %u\n", __func__, __LINE__, outlet, + *virq); + + return 0; +} + +int ps3_free_event_irq(unsigned int virq) +{ + int result; + + pr_debug(" -> %s:%d\n", __func__, __LINE__); + + result = lv1_destruct_event_receive_port(virq_to_hw(virq)); + + if (result) + pr_debug("%s:%d: lv1_destruct_event_receive_port failed: %s\n", + __func__, __LINE__, ps3_result(result)); + + irq_dispose_mapping(virq); + + pr_debug(" <- %s:%d\n", __func__, __LINE__); + return result; +} + +int ps3_send_event_locally(unsigned int virq) +{ + return lv1_send_event_locally(virq_to_hw(virq)); +} + +/** + * ps3_connect_event_irq - Assign a virq to a system bus device. + * @did: The HV device identifier read from the system repository. + * @interrupt_id: The device interrupt id read from the system repository. + * @virq: The assigned Linux virq. + * + * An event irq represents a virtual device interrupt. The interrupt_id + * coresponds to the software interrupt number. + */ + +int ps3_connect_event_irq(const struct ps3_device_id *did, + unsigned int interrupt_id, unsigned int *virq) +{ + int result; + + result = ps3_alloc_event_irq(virq); + + if (result) + return result; + + result = lv1_connect_interrupt_event_receive_port(did->bus_id, + did->dev_id, virq_to_hw(*virq), interrupt_id); + + if (result) { + pr_debug("%s:%d: lv1_connect_interrupt_event_receive_port" + " failed: %s\n", __func__, __LINE__, + ps3_result(result)); + ps3_free_event_irq(*virq); + *virq = NO_IRQ; + return result; + } + + pr_debug("%s:%d: interrupt_id %u, virq %u\n", __func__, __LINE__, + interrupt_id, *virq); + + return 0; +} + +int ps3_disconnect_event_irq(const struct ps3_device_id *did, + unsigned int interrupt_id, unsigned int virq) +{ + int result; + + pr_debug(" -> %s:%d: interrupt_id %u, virq %u\n", __func__, __LINE__, + interrupt_id, virq); + + result = lv1_disconnect_interrupt_event_receive_port(did->bus_id, + did->dev_id, virq_to_hw(virq), interrupt_id); + + if (result) + pr_debug("%s:%d: lv1_disconnect_interrupt_event_receive_port" + " failed: %s\n", __func__, __LINE__, + ps3_result(result)); + + ps3_free_event_irq(virq); + + pr_debug(" <- %s:%d\n", __func__, __LINE__); + return result; +} + +/** + * ps3_alloc_vuart_irq - Configure the system virtual uart virq. + * @virt_addr_bmp: The caller supplied virtual uart interrupt bitmap. + * @virq: The assigned Linux virq. + * + * The system supports only a single virtual uart, so multiple calls without + * freeing the interrupt will return a wrong state error. + */ + +int ps3_alloc_vuart_irq(void* virt_addr_bmp, unsigned int *virq) +{ + int result; + unsigned long outlet; + unsigned long lpar_addr; + + BUG_ON(!is_kernel_addr((unsigned long)virt_addr_bmp)); + + lpar_addr = ps3_mm_phys_to_lpar(__pa(virt_addr_bmp)); + + result = lv1_configure_virtual_uart_irq(lpar_addr, &outlet); + + if (result) { + pr_debug("%s:%d: lv1_configure_virtual_uart_irq failed: %s\n", + __func__, __LINE__, ps3_result(result)); + return result; + } + + *virq = irq_create_mapping(NULL, outlet); + + pr_debug("%s:%d: outlet %lu, virq %u\n", __func__, __LINE__, + outlet, *virq); + + return 0; +} + +int ps3_free_vuart_irq(unsigned int virq) +{ + int result; + + result = lv1_deconfigure_virtual_uart_irq(); + + if (result) { + pr_debug("%s:%d: lv1_configure_virtual_uart_irq failed: %s\n", + __func__, __LINE__, ps3_result(result)); + return result; + } + + irq_dispose_mapping(virq); + + return result; +} + +/** + * ps3_alloc_spe_irq - Configure an spe virq. + * @spe_id: The spe_id returned from lv1_construct_logical_spe(). + * @class: The spe interrupt class {0,1,2}. + * @virq: The assigned Linux virq. + * + */ + +int ps3_alloc_spe_irq(unsigned long spe_id, unsigned int class, + unsigned int *virq) +{ + int result; + unsigned long outlet; + + BUG_ON(class > 2); + + result = lv1_get_spe_irq_outlet(spe_id, class, &outlet); + + if (result) { + pr_debug("%s:%d: lv1_get_spe_irq_outlet failed: %s\n", + __func__, __LINE__, ps3_result(result)); + return result; + } + + *virq = irq_create_mapping(NULL, outlet); + + pr_debug("%s:%d: spe_id %lu, class %u, outlet %lu, virq %u\n", + __func__, __LINE__, spe_id, class, outlet, *virq); + + return 0; +} + +int ps3_free_spe_irq(unsigned int virq) +{ + irq_dispose_mapping(virq); + return 0; +} + +#define PS3_INVALID_OUTLET ((irq_hw_number_t)-1) +#define PS3_PLUG_MAX 63 + +/** + * struct bmp - a per cpu irq status and mask bitmap structure + * @status: 256 bit status bitmap indexed by plug + * @unused_1: + * @mask: 256 bit mask bitmap indexed by plug + * @unused_2: + * @lock: + * @ipi_debug_brk_mask: + * + * The HV mantains per SMT thread mappings of HV outlet to HV plug on + * behalf of the guest. These mappings are implemented as 256 bit guest + * supplied bitmaps indexed by plug number. The address of the bitmaps are + * registered with the HV through lv1_configure_irq_state_bitmap(). + * + * The HV supports 256 plugs per thread, assigned as {0..255}, for a total + * of 512 plugs supported on a processor. To simplify the logic this + * implementation equates HV plug value to linux virq value, constrains each + * interrupt to have a system wide unique plug number, and limits the range + * of the plug values to map into the first dword of the bitmaps. This + * gives a usable range of plug values of {NUM_ISA_INTERRUPTS..63}. Note + * that there is no constraint on how many in this set an individual thread + * can aquire. + */ + +struct bmp { + struct { + unsigned long status; + unsigned long unused_1[3]; + unsigned long mask; + unsigned long unused_2[3]; + } __attribute__ ((packed)); + spinlock_t lock; + unsigned long ipi_debug_brk_mask; +}; + +/** + * struct private - a per cpu data structure + * @node: HV node id + * @cpu: HV thread id + * @bmp: an HV bmp structure + */ + +struct private { + unsigned long node; + unsigned int cpu; + struct bmp bmp; +}; + +#if defined(DEBUG) +static void _dump_64_bmp(const char *header, const unsigned long *p, unsigned cpu, + const char* func, int line) +{ + pr_debug("%s:%d: %s %u {%04lx_%04lx_%04lx_%04lx}\n", + func, line, header, cpu, + *p >> 48, (*p >> 32) & 0xffff, (*p >> 16) & 0xffff, + *p & 0xffff); +} + +static void __attribute__ ((unused)) _dump_256_bmp(const char *header, + const unsigned long *p, unsigned cpu, const char* func, int line) +{ + pr_debug("%s:%d: %s %u {%016lx:%016lx:%016lx:%016lx}\n", + func, line, header, cpu, p[0], p[1], p[2], p[3]); +} + +#define dump_bmp(_x) _dump_bmp(_x, __func__, __LINE__) +static void _dump_bmp(struct private* pd, const char* func, int line) +{ + unsigned long flags; + + spin_lock_irqsave(&pd->bmp.lock, flags); + _dump_64_bmp("stat", &pd->bmp.status, pd->cpu, func, line); + _dump_64_bmp("mask", &pd->bmp.mask, pd->cpu, func, line); + spin_unlock_irqrestore(&pd->bmp.lock, flags); +} + +#define dump_mask(_x) _dump_mask(_x, __func__, __LINE__) +static void __attribute__ ((unused)) _dump_mask(struct private* pd, + const char* func, int line) +{ + unsigned long flags; + + spin_lock_irqsave(&pd->bmp.lock, flags); + _dump_64_bmp("mask", &pd->bmp.mask, pd->cpu, func, line); + spin_unlock_irqrestore(&pd->bmp.lock, flags); +} +#else +static void dump_bmp(struct private* pd) {}; +#endif /* defined(DEBUG) */ + +static void chip_mask(unsigned int virq) +{ + unsigned long flags; + struct private *pd = get_irq_chip_data(virq); + + pr_debug("%s:%d: cpu %u, virq %d\n", __func__, __LINE__, pd->cpu, virq); + + BUG_ON(virq < NUM_ISA_INTERRUPTS); + BUG_ON(virq > PS3_PLUG_MAX); + + spin_lock_irqsave(&pd->bmp.lock, flags); + pd->bmp.mask &= ~(0x8000000000000000UL >> virq); + spin_unlock_irqrestore(&pd->bmp.lock, flags); + + lv1_did_update_interrupt_mask(pd->node, pd->cpu); +} + +static void chip_unmask(unsigned int virq) +{ + unsigned long flags; + struct private *pd = get_irq_chip_data(virq); + + pr_debug("%s:%d: cpu %u, virq %d\n", __func__, __LINE__, pd->cpu, virq); + + BUG_ON(virq < NUM_ISA_INTERRUPTS); + BUG_ON(virq > PS3_PLUG_MAX); + + spin_lock_irqsave(&pd->bmp.lock, flags); + pd->bmp.mask |= (0x8000000000000000UL >> virq); + spin_unlock_irqrestore(&pd->bmp.lock, flags); + + lv1_did_update_interrupt_mask(pd->node, pd->cpu); +} + +static void chip_eoi(unsigned int virq) +{ + lv1_end_of_interrupt(virq); +} + +static struct irq_chip irq_chip = { + .typename = "ps3", + .mask = chip_mask, + .unmask = chip_unmask, + .eoi = chip_eoi, +}; + +static void host_unmap(struct irq_host *h, unsigned int virq) +{ + int result; + + pr_debug("%s:%d: virq %d\n", __func__, __LINE__, virq); + + lv1_disconnect_irq_plug(virq); + + result = set_irq_chip_data(virq, NULL); + BUG_ON(result); +} + +static DEFINE_PER_CPU(struct private, private); + +static int host_map(struct irq_host *h, unsigned int virq, + irq_hw_number_t hwirq) +{ + int result; + unsigned int cpu; + + pr_debug(" -> %s:%d\n", __func__, __LINE__); + pr_debug("%s:%d: hwirq %lu => virq %u\n", __func__, __LINE__, hwirq, + virq); + + /* bind this virq to a cpu */ + + preempt_disable(); + cpu = smp_processor_id(); + result = lv1_connect_irq_plug(virq, hwirq); + preempt_enable(); + + if (result) { + pr_info("%s:%d: lv1_connect_irq_plug failed:" + " %s\n", __func__, __LINE__, ps3_result(result)); + return -EPERM; + } + + result = set_irq_chip_data(virq, &per_cpu(private, cpu)); + BUG_ON(result); + + set_irq_chip_and_handler(virq, &irq_chip, handle_fasteoi_irq); + + pr_debug(" <- %s:%d\n", __func__, __LINE__); + return result; +} + +static struct irq_host_ops host_ops = { + .map = host_map, + .unmap = host_unmap, +}; + +void __init ps3_register_ipi_debug_brk(unsigned int cpu, unsigned int virq) +{ + struct private *pd = &per_cpu(private, cpu); + + pd->bmp.ipi_debug_brk_mask = 0x8000000000000000UL >> virq; + + pr_debug("%s:%d: cpu %u, virq %u, mask %lxh\n", __func__, __LINE__, + cpu, virq, pd->bmp.ipi_debug_brk_mask); +} + +static int bmp_get_and_clear_status_bit(struct bmp *m) +{ + unsigned long flags; + unsigned int bit; + unsigned long x; + + spin_lock_irqsave(&m->lock, flags); + + /* check for ipi break first to stop this cpu ASAP */ + + if (m->status & m->ipi_debug_brk_mask) { + m->status &= ~m->ipi_debug_brk_mask; + spin_unlock_irqrestore(&m->lock, flags); + return __ilog2(m->ipi_debug_brk_mask); + } + + x = (m->status & m->mask); + + for (bit = NUM_ISA_INTERRUPTS, x <<= bit; x; bit++, x <<= 1) + if (x & 0x8000000000000000UL) { + m->status &= ~(0x8000000000000000UL >> bit); + spin_unlock_irqrestore(&m->lock, flags); + return bit; + } + + spin_unlock_irqrestore(&m->lock, flags); + + pr_debug("%s:%d: not found\n", __func__, __LINE__); + return -1; +} + +unsigned int ps3_get_irq(void) +{ + int plug; + + struct private *pd = &__get_cpu_var(private); + + plug = bmp_get_and_clear_status_bit(&pd->bmp); + + if (plug < 1) { + pr_debug("%s:%d: no plug found: cpu %u\n", __func__, __LINE__, + pd->cpu); + dump_bmp(&per_cpu(private, 0)); + dump_bmp(&per_cpu(private, 1)); + return NO_IRQ; + } + +#if defined(DEBUG) + if (plug < NUM_ISA_INTERRUPTS || plug > PS3_PLUG_MAX) { + dump_bmp(&per_cpu(private, 0)); + dump_bmp(&per_cpu(private, 1)); + BUG(); + } +#endif + return plug; +} + +void __init ps3_init_IRQ(void) +{ + int result; + unsigned long node; + unsigned cpu; + struct irq_host *host; + + lv1_get_logical_ppe_id(&node); + + host = irq_alloc_host(IRQ_HOST_MAP_NOMAP, 0, &host_ops, + PS3_INVALID_OUTLET); + irq_set_default_host(host); + irq_set_virq_count(PS3_PLUG_MAX + 1); + + for_each_possible_cpu(cpu) { + struct private *pd = &per_cpu(private, cpu); + + pd->node = node; + pd->cpu = cpu; + spin_lock_init(&pd->bmp.lock); + + result = lv1_configure_irq_state_bitmap(node, cpu, + ps3_mm_phys_to_lpar(__pa(&pd->bmp.status))); + + if (result) + pr_debug("%s:%d: lv1_configure_irq_state_bitmap failed:" + " %s\n", __func__, __LINE__, + ps3_result(result)); + } + + ppc_md.get_irq = ps3_get_irq; +} -- cgit v1.2.3-70-g09d2 From 261efc3f178c8c5b55d76208aee1f39ce247f723 Mon Sep 17 00:00:00 2001 From: Geoff Levand Date: Thu, 23 Nov 2006 00:46:57 +0100 Subject: [POWERPC] ps3: add lpar addressing Adds some needed bits for a config option PS3_USE_LPAR_ADDR that disables the PS3 lpar address translation mechanism. This is a currently needed workaround for limitations in the design of the generic cell spu support. Signed-off-by: Geoff Levand Signed-off-by: Arnd Bergmann --- arch/powerpc/platforms/ps3/Kconfig | 11 +++++++++++ include/asm-powerpc/sparsemem.h | 6 ++++++ 2 files changed, 17 insertions(+) (limited to 'arch/powerpc') diff --git a/arch/powerpc/platforms/ps3/Kconfig b/arch/powerpc/platforms/ps3/Kconfig index f023719f645..451bfcd5502 100644 --- a/arch/powerpc/platforms/ps3/Kconfig +++ b/arch/powerpc/platforms/ps3/Kconfig @@ -29,4 +29,15 @@ config PS3_DYNAMIC_DMA This support is mainly for Linux kernel development. If unsure, say N. +config PS3_USE_LPAR_ADDR + depends on PPC_PS3 && EXPERIMENTAL + bool "PS3 use lpar address space" + default y + help + This option is solely for experimentation by experts. Disables + translation of lpar addresses. SPE support currently won't work + without this set to y. + + If you have any doubt, choose the default y. + endmenu diff --git a/include/asm-powerpc/sparsemem.h b/include/asm-powerpc/sparsemem.h index 38b1ea3b58f..48ad807a0b8 100644 --- a/include/asm-powerpc/sparsemem.h +++ b/include/asm-powerpc/sparsemem.h @@ -9,8 +9,14 @@ * MAX_PHYSMEM_BITS 2^N: how much memory we can have in that space */ #define SECTION_SIZE_BITS 24 + +#if defined(CONFIG_PS3_USE_LPAR_ADDR) +#define MAX_PHYSADDR_BITS 47 +#define MAX_PHYSMEM_BITS 47 +#else #define MAX_PHYSADDR_BITS 44 #define MAX_PHYSMEM_BITS 44 +#endif #ifdef CONFIG_MEMORY_HOTPLUG extern void create_section_mapping(unsigned long start, unsigned long end); -- cgit v1.2.3-70-g09d2 From 00a3e2e93cd3ce73ab2d200fff22a62548da06d6 Mon Sep 17 00:00:00 2001 From: Geoff Levand Date: Thu, 23 Nov 2006 00:46:58 +0100 Subject: [POWERPC] ps3: add OS params support Adds support for early access to the parameter data from the PS3 'Other OS' flash memory area. The parameter data mainly holds user preferences like static ip address. Signed-off-by: Geoff Levand Signed-off-by: Arnd Bergmann --- arch/powerpc/platforms/ps3/Makefile | 2 +- arch/powerpc/platforms/ps3/os-area.c | 259 +++++++++++++++++++++++++++++++++++ 2 files changed, 260 insertions(+), 1 deletion(-) create mode 100644 arch/powerpc/platforms/ps3/os-area.c (limited to 'arch/powerpc') diff --git a/arch/powerpc/platforms/ps3/Makefile b/arch/powerpc/platforms/ps3/Makefile index 8d6c72c6ea7..6eb69778636 100644 --- a/arch/powerpc/platforms/ps3/Makefile +++ b/arch/powerpc/platforms/ps3/Makefile @@ -1,2 +1,2 @@ obj-y += setup.o mm.o smp.o time.o hvcall.o htab.o repository.o -obj-y += interrupt.o exports.o +obj-y += interrupt.o exports.o os-area.o diff --git a/arch/powerpc/platforms/ps3/os-area.c b/arch/powerpc/platforms/ps3/os-area.c new file mode 100644 index 00000000000..58358305dc1 --- /dev/null +++ b/arch/powerpc/platforms/ps3/os-area.c @@ -0,0 +1,259 @@ +/* + * PS3 'Other OS' area data. + * + * Copyright (C) 2006 Sony Computer Entertainment Inc. + * Copyright 2006 Sony Corp. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include +#include + +#include +#include + +#include "platform.h" + +enum { + OS_AREA_SEGMENT_SIZE = 0X200, +}; + +enum { + HEADER_LDR_FORMAT_RAW = 0, + HEADER_LDR_FORMAT_GZIP = 1, +}; + +/** + * struct os_area_header - os area header segment. + * @magic_num: Always 'cell_ext_os_area'. + * @hdr_version: Header format version number. + * @os_area_offset: Starting segment number of os image area. + * @ldr_area_offset: Starting segment number of bootloader image area. + * @ldr_format: HEADER_LDR_FORMAT flag. + * @ldr_size: Size of bootloader image in bytes. + * + * Note that the docs refer to area offsets. These are offsets in units of + * segments from the start of the os area (top of the header). These are + * better thought of as segment numbers. The os area of the os area is + * reserved for the os image. + */ + +struct os_area_header { + s8 magic_num[16]; + u32 hdr_version; + u32 os_area_offset; + u32 ldr_area_offset; + u32 _reserved_1; + u32 ldr_format; + u32 ldr_size; + u32 _reserved_2[6]; +} __attribute__ ((packed)); + +enum { + PARAM_BOOT_FLAG_GAME_OS = 0, + PARAM_BOOT_FLAG_OTHER_OS = 1, +}; + +enum { + PARAM_AV_MULTI_OUT_NTSC = 0, + PARAM_AV_MULTI_OUT_PAL_RGB = 1, + PARAM_AV_MULTI_OUT_PAL_YCBCR = 2, + PARAM_AV_MULTI_OUT_SECAM = 3, +}; + +enum { + PARAM_CTRL_BUTTON_O_IS_YES = 0, + PARAM_CTRL_BUTTON_X_IS_YES = 1, +}; + +/** + * struct os_area_params - os area params segment. + * @boot_flag: User preference of operating system, PARAM_BOOT_FLAG flag. + * @num_params: Number of params in this (params) segment. + * @rtc_diff: Difference in seconds between 1970 and the ps3 rtc value. + * @av_multi_out: User preference of AV output, PARAM_AV_MULTI_OUT flag. + * @ctrl_button: User preference of controller button config, PARAM_CTRL_BUTTON + * flag. + * @static_ip_addr: User preference of static IP address. + * @network_mask: User preference of static network mask. + * @default_gateway: User preference of static default gateway. + * @dns_primary: User preference of static primary dns server. + * @dns_secondary: User preference of static secondary dns server. + * + * User preference of zero for static_ip_addr means use dhcp. + */ + +struct os_area_params { + u32 boot_flag; + u32 _reserved_1[3]; + u32 num_params; + u32 _reserved_2[3]; + /* param 0 */ + s64 rtc_diff; + u8 av_multi_out; + u8 ctrl_button; + u8 _reserved_3[6]; + /* param 1 */ + u8 static_ip_addr[4]; + u8 network_mask[4]; + u8 default_gateway[4]; + u8 _reserved_4[4]; + /* param 2 */ + u8 dns_primary[4]; + u8 dns_secondary[4]; + u8 _reserved_5[8]; +} __attribute__ ((packed)); + +/** + * struct saved_params - Static working copies of data from the 'Other OS' area. + * + * For the convinience of the guest, the HV makes a copy of the 'Other OS' area + * in flash to a high address in the boot memory region and then puts that RAM + * address and the byte count into the repository for retreval by the guest. + * We copy the data we want into a static variable and allow the memory setup + * by the HV to be claimed by the lmb manager. + */ + +struct saved_params { + /* param 0 */ + s64 rtc_diff; + unsigned int av_multi_out; + unsigned int ctrl_button; + /* param 1 */ + u8 static_ip_addr[4]; + u8 network_mask[4]; + u8 default_gateway[4]; + /* param 2 */ + u8 dns_primary[4]; + u8 dns_secondary[4]; +} static saved_params; + +#define dump_header(_a) _dump_header(_a, __func__, __LINE__) +static void _dump_header(const struct os_area_header __iomem *h, const char* func, + int line) +{ + pr_debug("%s:%d: h.magic_num: '%s'\n", func, line, + h->magic_num); + pr_debug("%s:%d: h.hdr_version: %u\n", func, line, + h->hdr_version); + pr_debug("%s:%d: h.os_area_offset: %u\n", func, line, + h->os_area_offset); + pr_debug("%s:%d: h.ldr_area_offset: %u\n", func, line, + h->ldr_area_offset); + pr_debug("%s:%d: h.ldr_format: %u\n", func, line, + h->ldr_format); + pr_debug("%s:%d: h.ldr_size: %xh\n", func, line, + h->ldr_size); +} + +#define dump_params(_a) _dump_params(_a, __func__, __LINE__) +static void _dump_params(const struct os_area_params __iomem *p, const char* func, + int line) +{ + pr_debug("%s:%d: p.boot_flag: %u\n", func, line, p->boot_flag); + pr_debug("%s:%d: p.num_params: %u\n", func, line, p->num_params); + pr_debug("%s:%d: p.rtc_diff %ld\n", func, line, p->rtc_diff); + pr_debug("%s:%d: p.av_multi_out %u\n", func, line, p->av_multi_out); + pr_debug("%s:%d: p.ctrl_button: %u\n", func, line, p->ctrl_button); + pr_debug("%s:%d: p.static_ip_addr: %u.%u.%u.%u\n", func, line, + p->static_ip_addr[0], p->static_ip_addr[1], + p->static_ip_addr[2], p->static_ip_addr[3]); + pr_debug("%s:%d: p.network_mask: %u.%u.%u.%u\n", func, line, + p->network_mask[0], p->network_mask[1], + p->network_mask[2], p->network_mask[3]); + pr_debug("%s:%d: p.default_gateway: %u.%u.%u.%u\n", func, line, + p->default_gateway[0], p->default_gateway[1], + p->default_gateway[2], p->default_gateway[3]); + pr_debug("%s:%d: p.dns_primary: %u.%u.%u.%u\n", func, line, + p->dns_primary[0], p->dns_primary[1], + p->dns_primary[2], p->dns_primary[3]); + pr_debug("%s:%d: p.dns_secondary: %u.%u.%u.%u\n", func, line, + p->dns_secondary[0], p->dns_secondary[1], + p->dns_secondary[2], p->dns_secondary[3]); +} + +static int __init verify_header(const struct os_area_header *header) +{ + if (memcmp(header->magic_num, "cell_ext_os_area", 16)) { + pr_debug("%s:%d magic_num failed\n", __func__, __LINE__); + return -1; + } + + if (header->hdr_version < 1) { + pr_debug("%s:%d hdr_version failed\n", __func__, __LINE__); + return -1; + } + + if (header->os_area_offset > header->ldr_area_offset) { + pr_debug("%s:%d offsets failed\n", __func__, __LINE__); + return -1; + } + + return 0; +} + +int __init ps3_os_area_init(void) +{ + int result; + u64 lpar_addr; + unsigned int size; + struct os_area_header *header; + struct os_area_params *params; + + result = ps3_repository_read_boot_dat_info(&lpar_addr, &size); + + if (result) { + pr_debug("%s:%d ps3_repository_read_boot_dat_info failed\n", + __func__, __LINE__); + return result; + } + + header = (struct os_area_header *)__va(lpar_addr); + params = (struct os_area_params *)__va(lpar_addr + OS_AREA_SEGMENT_SIZE); + + result = verify_header(header); + + if (result) { + pr_debug("%s:%d verify_header failed\n", __func__, __LINE__); + dump_header(header); + return -EIO; + } + + dump_header(header); + dump_params(params); + + saved_params.rtc_diff = params->rtc_diff; + saved_params.av_multi_out = params->av_multi_out; + saved_params.ctrl_button = params->ctrl_button; + memcpy(saved_params.static_ip_addr, params->static_ip_addr, 4); + memcpy(saved_params.network_mask, params->network_mask, 4); + memcpy(saved_params.default_gateway, params->default_gateway, 4); + memcpy(saved_params.dns_secondary, params->dns_secondary, 4); + + return result; +} + +/** + * ps3_os_area_rtc_diff - Returns the ps3 rtc diff value. + * + * The ps3 rtc maintains a value that approximates seconds since + * 2000-01-01 00:00:00 UTC. Returns the exact number of seconds from 1970 to + * 2000 when saved_params.rtc_diff has not been properly set up. + */ + +u64 ps3_os_area_rtc_diff(void) +{ + return saved_params.rtc_diff ? saved_params.rtc_diff : 946684800UL; +} -- cgit v1.2.3-70-g09d2 From de91a53429952875740692d1de36ae70d4cf81da Mon Sep 17 00:00:00 2001 From: Geoff Levand Date: Thu, 23 Nov 2006 00:46:59 +0100 Subject: [POWERPC] ps3: add spu support Adds spu support for the PS3 platform. Signed-off-by: Geoff Levand Signed-off-by: Arnd Bergmann --- arch/powerpc/platforms/ps3/Makefile | 2 + arch/powerpc/platforms/ps3/platform.h | 8 + arch/powerpc/platforms/ps3/spu.c | 613 ++++++++++++++++++++++++++++++++++ 3 files changed, 623 insertions(+) create mode 100644 arch/powerpc/platforms/ps3/spu.c (limited to 'arch/powerpc') diff --git a/arch/powerpc/platforms/ps3/Makefile b/arch/powerpc/platforms/ps3/Makefile index 6eb69778636..3757cfabc8c 100644 --- a/arch/powerpc/platforms/ps3/Makefile +++ b/arch/powerpc/platforms/ps3/Makefile @@ -1,2 +1,4 @@ obj-y += setup.o mm.o smp.o time.o hvcall.o htab.o repository.o obj-y += interrupt.o exports.o os-area.o + +obj-$(CONFIG_SPU_BASE) += spu.o diff --git a/arch/powerpc/platforms/ps3/platform.h b/arch/powerpc/platforms/ps3/platform.h index d9948df6ccd..23b111bea9d 100644 --- a/arch/powerpc/platforms/ps3/platform.h +++ b/arch/powerpc/platforms/ps3/platform.h @@ -57,4 +57,12 @@ int ps3_set_rtc_time(struct rtc_time *time); int __init ps3_os_area_init(void); u64 ps3_os_area_rtc_diff(void); +/* spu */ + +#if defined(CONFIG_SPU_BASE) +void ps3_spu_set_platform (void); +#else +static inline void ps3_spu_set_platform (void) {} +#endif + #endif diff --git a/arch/powerpc/platforms/ps3/spu.c b/arch/powerpc/platforms/ps3/spu.c new file mode 100644 index 00000000000..644532c3b7c --- /dev/null +++ b/arch/powerpc/platforms/ps3/spu.c @@ -0,0 +1,613 @@ +/* + * PS3 Platform spu routines. + * + * Copyright (C) 2006 Sony Computer Entertainment Inc. + * Copyright 2006 Sony Corp. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +/* spu_management_ops */ + +/** + * enum spe_type - Type of spe to create. + * @spe_type_logical: Standard logical spe. + * + * For use with lv1_construct_logical_spe(). The current HV does not support + * any types other than those listed. + */ + +enum spe_type { + SPE_TYPE_LOGICAL = 0, +}; + +/** + * struct spe_shadow - logical spe shadow register area. + * + * Read-only shadow of spe registers. + */ + +struct spe_shadow { + u8 padding_0000[0x0140]; + u64 int_status_class0_RW; /* 0x0140 */ + u64 int_status_class1_RW; /* 0x0148 */ + u64 int_status_class2_RW; /* 0x0150 */ + u8 padding_0158[0x0610-0x0158]; + u64 mfc_dsisr_RW; /* 0x0610 */ + u8 padding_0618[0x0620-0x0618]; + u64 mfc_dar_RW; /* 0x0620 */ + u8 padding_0628[0x0800-0x0628]; + u64 mfc_dsipr_R; /* 0x0800 */ + u8 padding_0808[0x0810-0x0808]; + u64 mfc_lscrr_R; /* 0x0810 */ + u8 padding_0818[0x0c00-0x0818]; + u64 mfc_cer_R; /* 0x0c00 */ + u8 padding_0c08[0x0f00-0x0c08]; + u64 spe_execution_status; /* 0x0f00 */ + u8 padding_0f08[0x1000-0x0f08]; +} __attribute__ ((packed)); + + +/** + * enum spe_ex_state - Logical spe execution state. + * @spe_ex_state_unexecutable: Uninitialized. + * @spe_ex_state_executable: Enabled, not ready. + * @spe_ex_state_executed: Ready for use. + * + * The execution state (status) of the logical spe as reported in + * struct spe_shadow:spe_execution_status. + */ + +enum spe_ex_state { + SPE_EX_STATE_UNEXECUTABLE = 0, + SPE_EX_STATE_EXECUTABLE = 2, + SPE_EX_STATE_EXECUTED = 3, +}; + +/** + * struct priv1_cache - Cached values of priv1 registers. + * @masks[]: Array of cached spe interrupt masks, indexed by class. + * @sr1: Cached mfc_sr1 register. + * @tclass_id: Cached mfc_tclass_id register. + */ + +struct priv1_cache { + u64 masks[3]; + u64 sr1; + u64 tclass_id; +}; + +/** + * struct spu_pdata - Platform state variables. + * @spe_id: HV spe id returned by lv1_construct_logical_spe(). + * @resource_id: HV spe resource id returned by + * ps3_repository_read_spe_resource_id(). + * @priv2_addr: lpar address of spe priv2 area returned by + * lv1_construct_logical_spe(). + * @shadow_addr: lpar address of spe register shadow area returned by + * lv1_construct_logical_spe(). + * @shadow: Virtual (ioremap) address of spe register shadow area. + * @cache: Cached values of priv1 registers. + */ + +struct spu_pdata { + u64 spe_id; + u64 resource_id; + u64 priv2_addr; + u64 shadow_addr; + struct spe_shadow __iomem *shadow; + struct priv1_cache cache; +}; + +static struct spu_pdata *spu_pdata(struct spu *spu) +{ + return spu->pdata; +} + +#define dump_areas(_a, _b, _c, _d, _e) \ + _dump_areas(_a, _b, _c, _d, _e, __func__, __LINE__) +static void _dump_areas(unsigned int spe_id, unsigned long priv2, + unsigned long problem, unsigned long ls, unsigned long shadow, + const char* func, int line) +{ + pr_debug("%s:%d: spe_id: %xh (%u)\n", func, line, spe_id, spe_id); + pr_debug("%s:%d: priv2: %lxh\n", func, line, priv2); + pr_debug("%s:%d: problem: %lxh\n", func, line, problem); + pr_debug("%s:%d: ls: %lxh\n", func, line, ls); + pr_debug("%s:%d: shadow: %lxh\n", func, line, shadow); +} + +static unsigned long get_vas_id(void) +{ + unsigned long id; + + lv1_get_logical_ppe_id(&id); + lv1_get_virtual_address_space_id_of_ppe(id, &id); + + return id; +} + +static int __init construct_spu(struct spu *spu) +{ + int result; + unsigned long unused; + + result = lv1_construct_logical_spe(PAGE_SHIFT, PAGE_SHIFT, PAGE_SHIFT, + PAGE_SHIFT, PAGE_SHIFT, get_vas_id(), SPE_TYPE_LOGICAL, + &spu_pdata(spu)->priv2_addr, &spu->problem_phys, + &spu->local_store_phys, &unused, + &spu_pdata(spu)->shadow_addr, + &spu_pdata(spu)->spe_id); + + if (result) { + pr_debug("%s:%d: lv1_construct_logical_spe failed: %s\n", + __func__, __LINE__, ps3_result(result)); + return result; + } + + return result; +} + +static int __init add_spu_pages(unsigned long start_addr, unsigned long size) +{ + int result; + unsigned long start_pfn; + unsigned long nr_pages; + struct pglist_data *pgdata; + struct zone *zone; + + BUG_ON(!mem_init_done); + + start_pfn = start_addr >> PAGE_SHIFT; + nr_pages = (size + PAGE_SIZE - 1) >> PAGE_SHIFT; + + pgdata = NODE_DATA(0); + zone = pgdata->node_zones; + + result = __add_pages(zone, start_pfn, nr_pages); + + if (result) + pr_debug("%s:%d: __add_pages failed: (%d)\n", + __func__, __LINE__, result); + + return result; +} + +static void spu_unmap(struct spu *spu) +{ + iounmap(spu->priv2); + iounmap(spu->problem); + iounmap((__force u8 __iomem *)spu->local_store); + iounmap(spu_pdata(spu)->shadow); +} + +static int __init setup_areas(struct spu *spu) +{ + struct table {char* name; unsigned long addr; unsigned long size;}; + int result; + + /* setup pages */ + + result = add_spu_pages(spu->local_store_phys, LS_SIZE); + if (result) + goto fail_add; + + result = add_spu_pages(spu->problem_phys, sizeof(struct spu_problem)); + if (result) + goto fail_add; + + /* ioremap */ + + spu_pdata(spu)->shadow = __ioremap( + spu_pdata(spu)->shadow_addr, sizeof(struct spe_shadow), + PAGE_READONLY | _PAGE_NO_CACHE | _PAGE_GUARDED); + if (!spu_pdata(spu)->shadow) { + pr_debug("%s:%d: ioremap shadow failed\n", __func__, __LINE__); + goto fail_ioremap; + } + + spu->local_store = ioremap(spu->local_store_phys, LS_SIZE); + if (!spu->local_store) { + pr_debug("%s:%d: ioremap local_store failed\n", + __func__, __LINE__); + goto fail_ioremap; + } + + spu->problem = ioremap(spu->problem_phys, + sizeof(struct spu_problem)); + if (!spu->problem) { + pr_debug("%s:%d: ioremap problem failed\n", __func__, __LINE__); + goto fail_ioremap; + } + + spu->priv2 = ioremap(spu_pdata(spu)->priv2_addr, + sizeof(struct spu_priv2)); + if (!spu->priv2) { + pr_debug("%s:%d: ioremap priv2 failed\n", __func__, __LINE__); + goto fail_ioremap; + } + + dump_areas(spu_pdata(spu)->spe_id, spu_pdata(spu)->priv2_addr, + spu->problem_phys, spu->local_store_phys, + spu_pdata(spu)->shadow_addr); + dump_areas(spu_pdata(spu)->spe_id, (unsigned long)spu->priv2, + (unsigned long)spu->problem, (unsigned long)spu->local_store, + (unsigned long)spu_pdata(spu)->shadow); + + return 0; + +fail_ioremap: + spu_unmap(spu); +fail_add: + return result; +} + +static int __init setup_interrupts(struct spu *spu) +{ + int result; + + result = ps3_alloc_spe_irq(spu_pdata(spu)->spe_id, 0, + &spu->irqs[0]); + + if (result) + goto fail_alloc_0; + + result = ps3_alloc_spe_irq(spu_pdata(spu)->spe_id, 1, + &spu->irqs[1]); + + if (result) + goto fail_alloc_1; + + result = ps3_alloc_spe_irq(spu_pdata(spu)->spe_id, 2, + &spu->irqs[2]); + + if (result) + goto fail_alloc_2; + + return result; + +fail_alloc_2: + ps3_free_spe_irq(spu->irqs[1]); +fail_alloc_1: + ps3_free_spe_irq(spu->irqs[0]); +fail_alloc_0: + spu->irqs[0] = spu->irqs[1] = spu->irqs[2] = NO_IRQ; + return result; +} + +static int __init enable_spu(struct spu *spu) +{ + int result; + + result = lv1_enable_logical_spe(spu_pdata(spu)->spe_id, + spu_pdata(spu)->resource_id); + + if (result) { + pr_debug("%s:%d: lv1_enable_logical_spe failed: %s\n", + __func__, __LINE__, ps3_result(result)); + goto fail_enable; + } + + result = setup_areas(spu); + + if (result) + goto fail_areas; + + result = setup_interrupts(spu); + + if (result) + goto fail_interrupts; + + return 0; + +fail_interrupts: + spu_unmap(spu); +fail_areas: + lv1_disable_logical_spe(spu_pdata(spu)->spe_id, 0); +fail_enable: + return result; +} + +static int ps3_destroy_spu(struct spu *spu) +{ + int result; + + pr_debug("%s:%d spu_%d\n", __func__, __LINE__, spu->number); + + result = lv1_disable_logical_spe(spu_pdata(spu)->spe_id, 0); + BUG_ON(result); + + ps3_free_spe_irq(spu->irqs[2]); + ps3_free_spe_irq(spu->irqs[1]); + ps3_free_spe_irq(spu->irqs[0]); + + spu->irqs[0] = spu->irqs[1] = spu->irqs[2] = NO_IRQ; + + spu_unmap(spu); + + result = lv1_destruct_logical_spe(spu_pdata(spu)->spe_id); + BUG_ON(result); + + kfree(spu->pdata); + spu->pdata = NULL; + + return 0; +} + +static int __init ps3_create_spu(struct spu *spu, void *data) +{ + int result; + + pr_debug("%s:%d spu_%d\n", __func__, __LINE__, spu->number); + + spu->pdata = kzalloc(sizeof(struct spu_pdata), + GFP_KERNEL); + + if (!spu->pdata) { + result = -ENOMEM; + goto fail_malloc; + } + + spu_pdata(spu)->resource_id = (unsigned long)data; + + /* Init cached reg values to HV defaults. */ + + spu_pdata(spu)->cache.sr1 = 0x33; + + result = construct_spu(spu); + + if (result) + goto fail_construct; + + /* For now, just go ahead and enable it. */ + + result = enable_spu(spu); + + if (result) + goto fail_enable; + + /* Make sure the spu is in SPE_EX_STATE_EXECUTED. */ + + /* need something better here!!! */ + while (in_be64(&spu_pdata(spu)->shadow->spe_execution_status) + != SPE_EX_STATE_EXECUTED) + (void)0; + + return result; + +fail_enable: +fail_construct: + ps3_destroy_spu(spu); +fail_malloc: + return result; +} + +static int __init ps3_enumerate_spus(int (*fn)(void *data)) +{ + int result; + unsigned int num_resource_id; + unsigned int i; + + result = ps3_repository_read_num_spu_resource_id(&num_resource_id); + + pr_debug("%s:%d: num_resource_id %u\n", __func__, __LINE__, + num_resource_id); + + /* + * For now, just create logical spus equal to the number + * of physical spus reserved for the partition. + */ + + for (i = 0; i < num_resource_id; i++) { + enum ps3_spu_resource_type resource_type; + unsigned int resource_id; + + result = ps3_repository_read_spu_resource_id(i, + &resource_type, &resource_id); + + if (result) + break; + + if (resource_type == PS3_SPU_RESOURCE_TYPE_EXCLUSIVE) { + result = fn((void*)(unsigned long)resource_id); + + if (result) + break; + } + } + + if (result) + printk(KERN_WARNING "%s:%d: Error initializing spus\n", + __func__, __LINE__); + + return result; +} + +const struct spu_management_ops spu_management_ps3_ops = { + .enumerate_spus = ps3_enumerate_spus, + .create_spu = ps3_create_spu, + .destroy_spu = ps3_destroy_spu, +}; + +/* spu_priv1_ops */ + +static void int_mask_and(struct spu *spu, int class, u64 mask) +{ + u64 old_mask; + + /* are these serialized by caller??? */ + old_mask = spu_int_mask_get(spu, class); + spu_int_mask_set(spu, class, old_mask & mask); +} + +static void int_mask_or(struct spu *spu, int class, u64 mask) +{ + u64 old_mask; + + old_mask = spu_int_mask_get(spu, class); + spu_int_mask_set(spu, class, old_mask | mask); +} + +static void int_mask_set(struct spu *spu, int class, u64 mask) +{ + spu_pdata(spu)->cache.masks[class] = mask; + lv1_set_spe_interrupt_mask(spu_pdata(spu)->spe_id, class, + spu_pdata(spu)->cache.masks[class]); +} + +static u64 int_mask_get(struct spu *spu, int class) +{ + return spu_pdata(spu)->cache.masks[class]; +} + +static void int_stat_clear(struct spu *spu, int class, u64 stat) +{ + /* Note that MFC_DSISR will be cleared when class1[MF] is set. */ + + lv1_clear_spe_interrupt_status(spu_pdata(spu)->spe_id, class, + stat, 0); +} + +static u64 int_stat_get(struct spu *spu, int class) +{ + u64 stat; + + lv1_get_spe_interrupt_status(spu_pdata(spu)->spe_id, class, &stat); + return stat; +} + +static void cpu_affinity_set(struct spu *spu, int cpu) +{ + /* No support. */ +} + +static u64 mfc_dar_get(struct spu *spu) +{ + return in_be64(&spu_pdata(spu)->shadow->mfc_dar_RW); +} + +static void mfc_dsisr_set(struct spu *spu, u64 dsisr) +{ + /* Nothing to do, cleared in int_stat_clear(). */ +} + +static u64 mfc_dsisr_get(struct spu *spu) +{ + return in_be64(&spu_pdata(spu)->shadow->mfc_dsisr_RW); +} + +static void mfc_sdr_setup(struct spu *spu) +{ + /* Nothing to do. */ +} + +static void mfc_sr1_set(struct spu *spu, u64 sr1) +{ + /* Check bits allowed by HV. */ + + static const u64 allowed = ~(MFC_STATE1_LOCAL_STORAGE_DECODE_MASK + | MFC_STATE1_PROBLEM_STATE_MASK); + + BUG_ON((sr1 & allowed) != (spu_pdata(spu)->cache.sr1 & allowed)); + + spu_pdata(spu)->cache.sr1 = sr1; + lv1_set_spe_privilege_state_area_1_register( + spu_pdata(spu)->spe_id, + offsetof(struct spu_priv1, mfc_sr1_RW), + spu_pdata(spu)->cache.sr1); +} + +static u64 mfc_sr1_get(struct spu *spu) +{ + return spu_pdata(spu)->cache.sr1; +} + +static void mfc_tclass_id_set(struct spu *spu, u64 tclass_id) +{ + spu_pdata(spu)->cache.tclass_id = tclass_id; + lv1_set_spe_privilege_state_area_1_register( + spu_pdata(spu)->spe_id, + offsetof(struct spu_priv1, mfc_tclass_id_RW), + spu_pdata(spu)->cache.tclass_id); +} + +static u64 mfc_tclass_id_get(struct spu *spu) +{ + return spu_pdata(spu)->cache.tclass_id; +} + +static void tlb_invalidate(struct spu *spu) +{ + /* Nothing to do. */ +} + +static void resource_allocation_groupID_set(struct spu *spu, u64 id) +{ + /* No support. */ +} + +static u64 resource_allocation_groupID_get(struct spu *spu) +{ + return 0; /* No support. */ +} + +static void resource_allocation_enable_set(struct spu *spu, u64 enable) +{ + /* No support. */ +} + +static u64 resource_allocation_enable_get(struct spu *spu) +{ + return 0; /* No support. */ +} + +const struct spu_priv1_ops spu_priv1_ps3_ops = { + .int_mask_and = int_mask_and, + .int_mask_or = int_mask_or, + .int_mask_set = int_mask_set, + .int_mask_get = int_mask_get, + .int_stat_clear = int_stat_clear, + .int_stat_get = int_stat_get, + .cpu_affinity_set = cpu_affinity_set, + .mfc_dar_get = mfc_dar_get, + .mfc_dsisr_set = mfc_dsisr_set, + .mfc_dsisr_get = mfc_dsisr_get, + .mfc_sdr_setup = mfc_sdr_setup, + .mfc_sr1_set = mfc_sr1_set, + .mfc_sr1_get = mfc_sr1_get, + .mfc_tclass_id_set = mfc_tclass_id_set, + .mfc_tclass_id_get = mfc_tclass_id_get, + .tlb_invalidate = tlb_invalidate, + .resource_allocation_groupID_set = resource_allocation_groupID_set, + .resource_allocation_groupID_get = resource_allocation_groupID_get, + .resource_allocation_enable_set = resource_allocation_enable_set, + .resource_allocation_enable_get = resource_allocation_enable_get, +}; + +void ps3_spu_set_platform(void) +{ + spu_priv1_ops = &spu_priv1_ps3_ops; + spu_management_ops = &spu_management_ps3_ops; +} -- cgit v1.2.3-70-g09d2 From 797c7b56d28e800947c66d1c324a6bfc83289b7a Mon Sep 17 00:00:00 2001 From: Geoff Levand Date: Thu, 23 Nov 2006 00:47:01 +0100 Subject: [POWERPC] ps3: add ps3_defconfig Adds a ps3_defconfig for the PS3 game console. Signed-off-by: Geoff Levand Signed-off-by: Arnd Bergmann --- arch/powerpc/configs/ps3_defconfig | 837 +++++++++++++++++++++++++++++++++++++ 1 file changed, 837 insertions(+) create mode 100644 arch/powerpc/configs/ps3_defconfig (limited to 'arch/powerpc') diff --git a/arch/powerpc/configs/ps3_defconfig b/arch/powerpc/configs/ps3_defconfig new file mode 100644 index 00000000000..f2d888e014a --- /dev/null +++ b/arch/powerpc/configs/ps3_defconfig @@ -0,0 +1,837 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.19-rc6 +# Tue Nov 21 19:38:53 2006 +# +CONFIG_PPC64=y +CONFIG_64BIT=y +CONFIG_PPC_MERGE=y +CONFIG_MMU=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_IRQ_PER_CPU=y +CONFIG_RWSEM_XCHGADD_ALGORITHM=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_PPC=y +CONFIG_EARLY_PRINTK=y +CONFIG_COMPAT=y +CONFIG_SYSVIPC_COMPAT=y +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_ARCH_MAY_HAVE_PC_FDC=y +CONFIG_PPC_OF=y +# CONFIG_PPC_UDBG_16550 is not set +# CONFIG_GENERIC_TBSYNC is not set +CONFIG_AUDIT_ARCH=y +# CONFIG_DEFAULT_UIMAGE is not set + +# +# Processor support +# +# CONFIG_POWER4_ONLY is not set +CONFIG_POWER3=y +CONFIG_POWER4=y +CONFIG_PPC_FPU=y +# CONFIG_PPC_DCR_NATIVE is not set +# CONFIG_PPC_DCR_MMIO is not set +# CONFIG_PPC_OF_PLATFORM_PCI is not set +CONFIG_ALTIVEC=y +CONFIG_PPC_STD_MMU=y +CONFIG_VIRT_CPU_ACCOUNTING=y +CONFIG_SMP=y +CONFIG_NR_CPUS=2 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 + +# +# General setup +# +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +# CONFIG_IPC_NS is not set +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_UTS_NS is not set +# CONFIG_AUDIT is not set +# CONFIG_IKCONFIG is not set +# CONFIG_CPUSETS is not set +# CONFIG_RELAY is not set +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +# CONFIG_SYSCTL_SYSCALL is not set +CONFIG_KALLSYMS=y +CONFIG_KALLSYMS_ALL=y +CONFIG_KALLSYMS_EXTRA_PASS=y +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SHMEM=y +CONFIG_SLAB=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +# CONFIG_SLOB is not set + +# +# Loadable module support +# +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y +CONFIG_STOP_MACHINE=y + +# +# Block layer +# +CONFIG_BLOCK=y +# CONFIG_BLK_DEV_IO_TRACE is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + +# +# Platform support +# +CONFIG_PPC_MULTIPLATFORM=y +# CONFIG_EMBEDDED6xx is not set +# CONFIG_APUS is not set +# CONFIG_PPC_PSERIES is not set +# CONFIG_PPC_ISERIES is not set +# CONFIG_PPC_PMAC is not set +# CONFIG_PPC_MAPLE is not set +# CONFIG_PPC_PASEMI is not set +CONFIG_PPC_CELL=y +# CONFIG_PPC_CELL_NATIVE is not set +# CONFIG_PPC_IBM_CELL_BLADE is not set +CONFIG_PPC_PS3=y +# CONFIG_U3_DART is not set +# CONFIG_PPC_RTAS is not set +# CONFIG_MMIO_NVRAM is not set +# CONFIG_PPC_MPC106 is not set +# CONFIG_PPC_970_NAP is not set +# CONFIG_PPC_INDIRECT_IO is not set +# CONFIG_GENERIC_IOMAP is not set +# CONFIG_CPU_FREQ is not set +# CONFIG_WANT_EARLY_SERIAL is not set +# CONFIG_MPIC is not set + +# +# Cell Broadband Engine options +# +CONFIG_SPU_FS=y +CONFIG_SPU_BASE=y +# CONFIG_CBE_RAS is not set + +# +# PS3 Platform Options +# +CONFIG_PS3_HTAB_SIZE=20 +CONFIG_PS3_DYNAMIC_DMA=y +CONFIG_PS3_USE_LPAR_ADDR=y + +# +# Kernel options +# +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +# CONFIG_PREEMPT_BKL is not set +CONFIG_BINFMT_ELF=y +CONFIG_BINFMT_MISC=y +CONFIG_FORCE_MAX_ZONEORDER=9 +# CONFIG_IOMMU_VMERGE is not set +CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y +# CONFIG_KEXEC is not set +# CONFIG_CRASH_DUMP is not set +# CONFIG_IRQ_ALL_CPUS is not set +# CONFIG_NUMA is not set +CONFIG_ARCH_SELECT_MEMORY_MODEL=y +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_DEFAULT=y +CONFIG_ARCH_POPULATES_NODE_MAP=y +CONFIG_SELECT_MEMORY_MODEL=y +# CONFIG_FLATMEM_MANUAL is not set +# CONFIG_DISCONTIGMEM_MANUAL is not set +CONFIG_SPARSEMEM_MANUAL=y +CONFIG_SPARSEMEM=y +CONFIG_HAVE_MEMORY_PRESENT=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPARSEMEM_EXTREME=y +CONFIG_MEMORY_HOTPLUG=y +CONFIG_MEMORY_HOTPLUG_SPARSE=y +CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_RESOURCES_64BIT=y +CONFIG_ARCH_MEMORY_PROBE=y +CONFIG_PPC_64K_PAGES=y +# CONFIG_SCHED_SMT is not set +CONFIG_PROC_DEVICETREE=y +CONFIG_CMDLINE_BOOL=y +CONFIG_CMDLINE="root=/dev/nfs rw ip=dhcp" +# CONFIG_PM is not set +# CONFIG_SECCOMP is not set +CONFIG_ISA_DMA_API=y + +# +# Bus options +# +CONFIG_GENERIC_ISA_DMA=y +# CONFIG_MPIC_WEIRD is not set +# CONFIG_PPC_I8259 is not set +# CONFIG_PCI is not set +# CONFIG_PCI_DOMAINS is not set + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set + +# +# PCI Hotplug Support +# +CONFIG_KERNEL_START=0xc000000000000000 + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +# CONFIG_NETDEBUG is not set +# CONFIG_PACKET is not set +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +# CONFIG_IP_PNP_BOOTP is not set +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_DIAG is not set +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set + +# +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_IEEE80211 is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_SYS_HYPERVISOR is not set + +# +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set + +# +# Memory Technology Devices (MTD) +# +# CONFIG_MTD is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# + +# +# Block devices +# +# CONFIG_BLK_DEV_FD is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +# CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_RAM is not set +# CONFIG_BLK_DEV_INITRD is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set + +# +# Misc devices +# +# CONFIG_TIFM_CORE is not set + +# +# ATA/ATAPI/MFM/RLL support +# +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +# CONFIG_BLK_DEV_SD is not set +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +# CONFIG_CHR_DEV_SG is not set +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set + +# +# SCSI low-level drivers +# +# CONFIG_ISCSI_TCP is not set +# CONFIG_SCSI_DEBUG is not set + +# +# Serial ATA (prod) and Parallel ATA (experimental) drivers +# +# CONFIG_ATA is not set + +# +# Multi-device support (RAID and LVM) +# +# CONFIG_MD is not set + +# +# Fusion MPT device support +# +# CONFIG_FUSION is not set + +# +# IEEE 1394 (FireWire) support +# + +# +# I2O device support +# + +# +# Macintosh device drivers +# +# CONFIG_WINDFARM is not set + +# +# Network device support +# +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set + +# +# PHY device support +# + +# +# Ethernet (10 or 100Mbit) +# +# CONFIG_NET_ETHERNET is not set + +# +# Ethernet (1000 Mbit) +# + +# +# Ethernet (10000 Mbit) +# + +# +# Token Ring devices +# + +# +# Wireless LAN (non-hamradio) +# +# CONFIG_NET_RADIO is not set + +# +# Wan interfaces +# +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Telephony Support +# +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set + +# +# Userland interfaces +# +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_TSDEV is not set +CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_UNIX98_PTYS=y +# CONFIG_LEGACY_PTYS is not set + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set + +# +# Watchdog Cards +# +# CONFIG_WATCHDOG is not set +# CONFIG_HW_RANDOM is not set +CONFIG_GEN_RTC=y +# CONFIG_GEN_RTC_X is not set +# CONFIG_DTLK is not set +# CONFIG_R3964 is not set + +# +# Ftape, the floppy tape device driver +# +# CONFIG_RAW_DRIVER is not set +# CONFIG_HANGCHECK_TIMER is not set + +# +# TPM devices +# +# CONFIG_TCG_TPM is not set + +# +# I2C support +# +# CONFIG_I2C is not set + +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set + +# +# Dallas's 1-wire bus +# +# CONFIG_W1 is not set + +# +# Hardware Monitoring support +# +# CONFIG_HWMON is not set +# CONFIG_HWMON_VID is not set + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set + +# +# Digital Video Broadcasting Devices +# +# CONFIG_DVB is not set + +# +# Graphics support +# +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FB is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Sound +# +# CONFIG_SOUND is not set + +# +# USB support +# +# CONFIG_USB_ARCH_HAS_HCD is not set +# CONFIG_USB_ARCH_HAS_OHCI is not set +# CONFIG_USB_ARCH_HAS_EHCI is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set + +# +# MMC/SD Card support +# +# CONFIG_MMC is not set + +# +# LED devices +# +# CONFIG_NEW_LEDS is not set + +# +# LED drivers +# + +# +# LED Triggers +# + +# +# InfiniBand support +# + +# +# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) +# + +# +# Real Time Clock +# +# CONFIG_RTC_CLASS is not set + +# +# DMA Engine support +# +# CONFIG_DMA_ENGINE is not set + +# +# DMA Clients +# + +# +# DMA Devices +# + +# +# File systems +# +# CONFIG_EXT2_FS is not set +# CONFIG_EXT3_FS is not set +# CONFIG_EXT4DEV_FS is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLBFS is not set +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +# CONFIG_NFS_V4 is not set +# CONFIG_NFS_DIRECTIO is not set +# CONFIG_NFSD is not set +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y + +# +# Native Language Support +# +# CONFIG_NLS is not set + +# +# Library routines +# +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +# CONFIG_CRC32 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_PLIST=y + +# +# Instrumentation Support +# +# CONFIG_PROFILING is not set +# CONFIG_KPROBES is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_MUST_CHECK=y +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +CONFIG_DEBUG_KERNEL=y +CONFIG_LOG_BUF_SHIFT=17 +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +CONFIG_DEBUG_SPINLOCK=y +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_RWSEMS is not set +CONFIG_DEBUG_SPINLOCK_SLEEP=y +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +CONFIG_DEBUG_INFO=y +# CONFIG_DEBUG_FS is not set +# CONFIG_DEBUG_VM is not set +CONFIG_DEBUG_LIST=y +CONFIG_FORCED_INLINING=y +# CONFIG_HEADERS_CHECK is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_DEBUG_STACKOVERFLOW is not set +# CONFIG_DEBUG_STACK_USAGE is not set +# CONFIG_DEBUGGER is not set +CONFIG_IRQSTACKS=y +# CONFIG_BOOTX_TEXT is not set +CONFIG_PPC_EARLY_DEBUG=y +# CONFIG_PPC_EARLY_DEBUG_LPAR is not set +# CONFIG_PPC_EARLY_DEBUG_G5 is not set +# CONFIG_PPC_EARLY_DEBUG_RTAS_PANEL is not set +# CONFIG_PPC_EARLY_DEBUG_RTAS_CONSOLE is not set +# CONFIG_PPC_EARLY_DEBUG_MAPLE is not set +# CONFIG_PPC_EARLY_DEBUG_ISERIES is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set + +# +# Cryptographic options +# +# CONFIG_CRYPTO is not set -- cgit v1.2.3-70-g09d2 From 1c72db14fe77c2aa2c18be0fa2594f54d7413147 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Thu, 23 Nov 2006 00:47:02 +0100 Subject: [POWERPC] update cell_defconfig for ps3 support In the common cell kernel, I want to have ps3 enabled to find potential bugs at compile-time. Also enable SPU disassembly in xmon. Signed-off-by: Arnd Bergmann --- arch/powerpc/configs/cell_defconfig | 31 +++++++++++++++++++++++-------- 1 file changed, 23 insertions(+), 8 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/configs/cell_defconfig b/arch/powerpc/configs/cell_defconfig index 3d6a2f10a7d..a98c982c73a 100644 --- a/arch/powerpc/configs/cell_defconfig +++ b/arch/powerpc/configs/cell_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.18 -# Wed Oct 4 15:30:50 2006 +# Linux kernel version: 2.6.19-rc6 +# Wed Nov 22 15:33:04 2006 # CONFIG_PPC64=y CONFIG_64BIT=y @@ -32,6 +32,10 @@ CONFIG_AUDIT_ARCH=y CONFIG_POWER3=y CONFIG_POWER4=y CONFIG_PPC_FPU=y +# CONFIG_PPC_DCR_NATIVE is not set +CONFIG_PPC_DCR_MMIO=y +CONFIG_PPC_DCR=y +CONFIG_PPC_OF_PLATFORM_PCI=y CONFIG_ALTIVEC=y CONFIG_PPC_STD_MMU=y CONFIG_VIRT_CPU_ACCOUNTING=y @@ -67,7 +71,7 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y # CONFIG_EMBEDDED is not set -# CONFIG_SYSCTL_SYSCALL is not set +CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set @@ -131,6 +135,7 @@ CONFIG_PPC_CELL=y CONFIG_PPC_CELL_NATIVE=y CONFIG_PPC_IBM_CELL_BLADE=y CONFIG_UDBG_RTAS_CONSOLE=y +CONFIG_PPC_PS3=y # CONFIG_U3_DART is not set CONFIG_PPC_RTAS=y # CONFIG_RTAS_ERROR_LOGGING is not set @@ -139,6 +144,8 @@ CONFIG_RTAS_FLASH=y CONFIG_MMIO_NVRAM=y # CONFIG_PPC_MPC106 is not set # CONFIG_PPC_970_NAP is not set +CONFIG_PPC_INDIRECT_IO=y +CONFIG_GENERIC_IOMAP=y CONFIG_CPU_FREQ=y CONFIG_CPU_FREQ_TABLE=y CONFIG_CPU_FREQ_DEBUG=y @@ -153,7 +160,7 @@ CONFIG_CPU_FREQ_GOV_ONDEMAND=y CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y # CONFIG_CPU_FREQ_PMAC64 is not set # CONFIG_WANT_EARLY_SERIAL is not set -# CONFIG_MPIC is not set +CONFIG_MPIC=y # # Cell Broadband Engine options @@ -164,6 +171,13 @@ CONFIG_CBE_RAS=y CONFIG_CBE_THERM=m CONFIG_CBE_CPUFREQ=m +# +# PS3 Platform Options +# +CONFIG_PS3_HTAB_SIZE=20 +# CONFIG_PS3_DYNAMIC_DMA is not set +CONFIG_PS3_USE_LPAR_ADDR=y + # # Kernel options # @@ -180,13 +194,14 @@ CONFIG_BINFMT_MISC=m CONFIG_FORCE_MAX_ZONEORDER=9 # CONFIG_IOMMU_VMERGE is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y -CONFIG_KEXEC=y +# CONFIG_KEXEC is not set # CONFIG_CRASH_DUMP is not set CONFIG_IRQ_ALL_CPUS=y CONFIG_NUMA=y CONFIG_NODES_SHIFT=4 CONFIG_ARCH_SELECT_MEMORY_MODEL=y CONFIG_ARCH_SPARSEMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_DEFAULT=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y # CONFIG_FLATMEM_MANUAL is not set @@ -203,6 +218,7 @@ CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y CONFIG_RESOURCES_64BIT=y CONFIG_ARCH_MEMORY_PROBE=y +CONFIG_NODES_SPAN_OTHER_NODES=y CONFIG_PPC_64K_PAGES=y CONFIG_SCHED_SMT=y CONFIG_PROC_DEVICETREE=y @@ -221,7 +237,6 @@ CONFIG_GENERIC_ISA_DMA=y CONFIG_PCI=y CONFIG_PCI_DOMAINS=y CONFIG_PCIEPORTBUS=y -# CONFIG_PCI_MULTITHREAD_PROBE is not set # CONFIG_PCI_DEBUG is not set # @@ -294,7 +309,6 @@ CONFIG_INET6_XFRM_MODE_TUNNEL=y # CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set # CONFIG_IPV6_SIT is not set CONFIG_IPV6_TUNNEL=m -# CONFIG_IPV6_SUBTREES is not set # CONFIG_IPV6_MULTIPLE_TABLES is not set # CONFIG_NETWORK_SECMARK is not set CONFIG_NETFILTER=y @@ -1157,6 +1171,7 @@ CONFIG_DEBUG_FS=y CONFIG_DEBUGGER=y CONFIG_XMON=y CONFIG_XMON_DEFAULT=y +CONFIG_XMON_DISASSEMBLY=y CONFIG_IRQSTACKS=y # CONFIG_BOOTX_TEXT is not set # CONFIG_PPC_EARLY_DEBUG is not set @@ -1174,7 +1189,7 @@ CONFIG_CRYPTO=y CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_BLKCIPHER=m CONFIG_CRYPTO_HASH=y -# CONFIG_CRYPTO_MANAGER is not set +CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_HMAC=y # CONFIG_CRYPTO_NULL is not set # CONFIG_CRYPTO_MD4 is not set -- cgit v1.2.3-70-g09d2 From fecb352f6bb86564b24ecbf7e5bfec09346b9327 Mon Sep 17 00:00:00 2001 From: Mike Wolf Date: Tue, 21 Nov 2006 14:41:54 -0600 Subject: [POWERPC] powerpc: Make 970MP detectable by oprofile Change the oprofile_cpu_type in cputables.c to be ppc64/970MP. Oprofile needs to distinquish the MP from other 970 processors so it can add some new counters specific to the 970MP. Signed-off-by: Mike Wolf Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/cputable.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c index 911ac442f44..0b01faa3e7e 100644 --- a/arch/powerpc/kernel/cputable.c +++ b/arch/powerpc/kernel/cputable.c @@ -225,7 +225,7 @@ static struct cpu_spec cpu_specs[] = { .num_pmcs = 8, .cpu_setup = __setup_cpu_ppc970MP, .cpu_restore = __restore_cpu_ppc970, - .oprofile_cpu_type = "ppc64/970", + .oprofile_cpu_type = "ppc64/970MP", .oprofile_type = PPC_OPROFILE_POWER4, .platform = "ppc970", }, -- cgit v1.2.3-70-g09d2 From 7839af3354c9ed86336a0b40032007919393f3ed Mon Sep 17 00:00:00 2001 From: Nicolas DET Date: Fri, 17 Nov 2006 17:08:37 +0100 Subject: [POWERPC] Compile a zImage.chrp if PPC_EFIKA seleted Signed-off-by: Nicolas DET Signed-off-by: Paul Mackerras --- arch/powerpc/boot/Makefile | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/powerpc') diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile index 4a6f0f054b7..22e90168723 100644 --- a/arch/powerpc/boot/Makefile +++ b/arch/powerpc/boot/Makefile @@ -156,6 +156,7 @@ image-$(CONFIG_PPC_PSERIES) += zImage.pseries image-$(CONFIG_PPC_MAPLE) += zImage.pseries image-$(CONFIG_PPC_IBM_CELL_BLADE) += zImage.pseries image-$(CONFIG_PPC_CHRP) += zImage.chrp +image-$(CONFIG_PPC_EFIKA) += zImage.chrp image-$(CONFIG_PPC_PMAC) += zImage.pmac image-$(CONFIG_DEFAULT_UIMAGE) += uImage -- cgit v1.2.3-70-g09d2 From aa668d6aac63f5fc02aa63bf25ff36d12510e050 Mon Sep 17 00:00:00 2001 From: Nicolas DET Date: Fri, 17 Nov 2006 16:03:20 +0100 Subject: [POWERPC] Fix compile issue for Efika platform This patch fixes a compile issue for the Efika platform recently introduced by API changes. Signed-off-by: Nicolas DET Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/efika/Makefile | 2 +- arch/powerpc/platforms/efika/setup.c | 1 + 2 files changed, 2 insertions(+), 1 deletion(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/platforms/efika/Makefile b/arch/powerpc/platforms/efika/Makefile index 17b2a781fba..56d44044023 100644 --- a/arch/powerpc/platforms/efika/Makefile +++ b/arch/powerpc/platforms/efika/Makefile @@ -1 +1 @@ -obj-y += setup.o mpc52xx.o pci.o +obj-y += setup.o pci.o diff --git a/arch/powerpc/platforms/efika/setup.c b/arch/powerpc/platforms/efika/setup.c index 3bc1b5fe0ce..110c980ed1e 100644 --- a/arch/powerpc/platforms/efika/setup.c +++ b/arch/powerpc/platforms/efika/setup.c @@ -29,6 +29,7 @@ #include #include #include +#include #include #include "efika.h" -- cgit v1.2.3-70-g09d2 From bd2e5f829e772787ea4d986d72ddf57f50878649 Mon Sep 17 00:00:00 2001 From: Jeremy Kerr Date: Mon, 27 Nov 2006 19:18:52 +0100 Subject: [POWERPC] spufs: return an error in spu_create is isolated create isnt supported This changes the spu_create system call to return an error (-ENODEV) if and isolated spu context is requested on hardware that doesn't support isolated mode. Tested on systemsim with and without isolation support Signed-off-by: Jeremy Kerr Signed-off-by: Arnd Bergmann --- arch/powerpc/platforms/cell/spufs/inode.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'arch/powerpc') diff --git a/arch/powerpc/platforms/cell/spufs/inode.c b/arch/powerpc/platforms/cell/spufs/inode.c index a3ca06bd0ca..c7d010749a1 100644 --- a/arch/powerpc/platforms/cell/spufs/inode.c +++ b/arch/powerpc/platforms/cell/spufs/inode.c @@ -323,6 +323,10 @@ static int spufs_create_context(struct inode *inode, == SPU_CREATE_ISOLATE) goto out_unlock; + ret = -ENODEV; + if ((flags & SPU_CREATE_ISOLATE) && !isolated_loader) + goto out_unlock; + ret = spufs_mkdir(inode, dentry, flags, mode & S_IRWXUGO); if (ret) goto out_unlock; -- cgit v1.2.3-70-g09d2 From c2b2226c7e46549c26fd5f5f40122536bc91ba0d Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Mon, 27 Nov 2006 19:18:53 +0100 Subject: [POWERPC] spufs: always send sigtrap on breakpoint Currently, we only send a sigtrap if the current task is being ptraced. This is somewhat inconsistant, and it breaks utrace support in fedora. Removing the check should do the right thing in all cases. Cc: Ulrich Weigand Signed-off-by: Arnd Bergmann --- arch/powerpc/platforms/cell/spufs/run.c | 10 ++++------ 1 file changed, 4 insertions(+), 6 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/platforms/cell/spufs/run.c b/arch/powerpc/platforms/cell/spufs/run.c index 1be4e3339d8..1acc2ffef8c 100644 --- a/arch/powerpc/platforms/cell/spufs/run.c +++ b/arch/powerpc/platforms/cell/spufs/run.c @@ -350,12 +350,10 @@ out2: (status >> SPU_STOP_STATUS_SHIFT != 0x2104))))) ret = status; - if (unlikely(current->ptrace & PT_PTRACED)) { - if ((status & SPU_STATUS_STOPPED_BY_STOP) - && (status >> SPU_STOP_STATUS_SHIFT) == 0x3fff) { - force_sig(SIGTRAP, current); - ret = -ERESTARTSYS; - } + if ((status & SPU_STATUS_STOPPED_BY_STOP) + && (status >> SPU_STOP_STATUS_SHIFT) == 0x3fff) { + force_sig(SIGTRAP, current); + ret = -ERESTARTSYS; } out: -- cgit v1.2.3-70-g09d2 From da06aa08d9f23e4f970d9a25a6e52f9a7736bfa2 Mon Sep 17 00:00:00 2001 From: Stephen Rothwell Date: Mon, 27 Nov 2006 19:18:54 +0100 Subject: [POWERPC] spufs: we should only execute init_spu_base on cell Signed-off-by: Stephen Rothwell Signed-off-by: Arnd Bergmann --- arch/powerpc/platforms/cell/spu_base.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'arch/powerpc') diff --git a/arch/powerpc/platforms/cell/spu_base.c b/arch/powerpc/platforms/cell/spu_base.c index 841ed359802..bd7bffc3ddd 100644 --- a/arch/powerpc/platforms/cell/spu_base.c +++ b/arch/powerpc/platforms/cell/spu_base.c @@ -663,6 +663,9 @@ static int __init init_spu_base(void) { int i, ret; + if (!spu_management_ops) + return 0; + /* create sysdev class for spus */ ret = sysdev_class_register(&spu_sysdev_class); if (ret) -- cgit v1.2.3-70-g09d2 From e055595d3e5f5233374211bc6893e5d16976df99 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Mon, 27 Nov 2006 19:18:55 +0100 Subject: [POWERPC] cell: fix building without spufs It may be desireable to build a kernel for cell without spufs, e.g. as the initial kboot kernel. This requires that the SPU specific parts of the core dump and the xmon code depend on CONFIG_SPU_BASE instead of CONFIG_PPC_CELL. Signed-off-by: Arnd Bergmann --- arch/powerpc/xmon/Makefile | 2 +- arch/powerpc/xmon/xmon.c | 6 +++--- include/asm-powerpc/elf.h | 2 +- 3 files changed, 5 insertions(+), 5 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/xmon/Makefile b/arch/powerpc/xmon/Makefile index 69303575d3d..51d97588e76 100644 --- a/arch/powerpc/xmon/Makefile +++ b/arch/powerpc/xmon/Makefile @@ -8,5 +8,5 @@ obj-y += xmon.o setjmp.o start.o nonstdio.o ifdef CONFIG_XMON_DISASSEMBLY obj-y += ppc-dis.o ppc-opc.o -obj-$(CONFIG_PPC_CELL) += spu-dis.o spu-opc.o +obj-$(CONFIG_SPU_BASE) += spu-dis.o spu-opc.o endif diff --git a/arch/powerpc/xmon/xmon.c b/arch/powerpc/xmon/xmon.c index 1cf90c8ac34..dc8a3760a98 100644 --- a/arch/powerpc/xmon/xmon.c +++ b/arch/powerpc/xmon/xmon.c @@ -213,7 +213,7 @@ Commands:\n\ p call a procedure\n\ r print registers\n\ s single step\n" -#ifdef CONFIG_PPC_CELL +#ifdef CONFIG_SPU_BASE " ss stop execution on all spus\n\ sr restore execution on stopped spus\n\ sf # dump spu fields for spu # (in hex)\n\ @@ -2654,7 +2654,7 @@ void __init xmon_setup(void) debugger(NULL); } -#ifdef CONFIG_PPC_CELL +#ifdef CONFIG_SPU_BASE struct spu_info { struct spu *spu; @@ -2907,7 +2907,7 @@ static int do_spu_cmd(void) return 0; } -#else /* ! CONFIG_PPC_CELL */ +#else /* ! CONFIG_SPU_BASE */ static int do_spu_cmd(void) { return -1; diff --git a/include/asm-powerpc/elf.h b/include/asm-powerpc/elf.h index 4545aa68250..b5436642a10 100644 --- a/include/asm-powerpc/elf.h +++ b/include/asm-powerpc/elf.h @@ -411,7 +411,7 @@ do { \ /* Keep this the last entry. */ #define R_PPC64_NUM 107 -#ifdef CONFIG_PPC_CELL +#ifdef CONFIG_SPU_BASE /* Notes used in ET_CORE. Note name is "SPU//". */ #define NT_SPU 1 -- cgit v1.2.3-70-g09d2 From eb30c72026500f9efa9bb23ab2393d6a9e36c5e1 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Mon, 27 Nov 2006 19:18:56 +0100 Subject: [POWERPC] ps3: Missed renames of CONFIG_PS3 to CONFIG_PPC_PS3 When renaming CONFIG_PS3 to CONFIG_PPC_PS3, a few occurrences have been missed. I also fixed up the alignment in arch/powerpc/platforms/Makefile. Signed-off-by: Geert Uytterhoeven Signed-off-by: Arnd Bergmann --- arch/powerpc/platforms/Makefile | 6 +++--- drivers/Makefile | 2 +- include/asm-powerpc/firmware.h | 4 ++-- 3 files changed, 6 insertions(+), 6 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/platforms/Makefile b/arch/powerpc/platforms/Makefile index 56caf4fbd73..52984a803e7 100644 --- a/arch/powerpc/platforms/Makefile +++ b/arch/powerpc/platforms/Makefile @@ -5,7 +5,7 @@ ifeq ($(CONFIG_PPC64),y) obj-$(CONFIG_PPC_PMAC) += powermac/ endif endif -obj-$(CONFIG_PPC_EFIKA) += efika/ +obj-$(CONFIG_PPC_EFIKA) += efika/ obj-$(CONFIG_PPC_CHRP) += chrp/ obj-$(CONFIG_4xx) += 4xx/ obj-$(CONFIG_PPC_83xx) += 83xx/ @@ -14,7 +14,7 @@ obj-$(CONFIG_PPC_86xx) += 86xx/ obj-$(CONFIG_PPC_PSERIES) += pseries/ obj-$(CONFIG_PPC_ISERIES) += iseries/ obj-$(CONFIG_PPC_MAPLE) += maple/ -obj-$(CONFIG_PPC_PASEMI) += pasemi/ +obj-$(CONFIG_PPC_PASEMI) += pasemi/ obj-$(CONFIG_PPC_CELL) += cell/ -obj-$(CONFIG_PS3) += ps3/ +obj-$(CONFIG_PPC_PS3) += ps3/ obj-$(CONFIG_EMBEDDED6xx) += embedded6xx/ diff --git a/drivers/Makefile b/drivers/Makefile index a47d2483b7a..67711770b1d 100644 --- a/drivers/Makefile +++ b/drivers/Makefile @@ -77,4 +77,4 @@ obj-$(CONFIG_CRYPTO) += crypto/ obj-$(CONFIG_SUPERH) += sh/ obj-$(CONFIG_GENERIC_TIME) += clocksource/ obj-$(CONFIG_DMA_ENGINE) += dma/ -obj-$(CONFIG_PS3) += ps3/ +obj-$(CONFIG_PPC_PS3) += ps3/ diff --git a/include/asm-powerpc/firmware.h b/include/asm-powerpc/firmware.h index d1011b892d5..84d43d6e13e 100644 --- a/include/asm-powerpc/firmware.h +++ b/include/asm-powerpc/firmware.h @@ -67,7 +67,7 @@ enum { #ifdef CONFIG_PPC_ISERIES FW_FEATURE_ISERIES_POSSIBLE | #endif -#ifdef CONFIG_PS3 +#ifdef CONFIG_PPC_PS3 FW_FEATURE_PS3_POSSIBLE | #endif 0, @@ -78,7 +78,7 @@ enum { #ifdef CONFIG_PPC_ISERIES FW_FEATURE_ISERIES_ALWAYS & #endif -#ifdef CONFIG_PS3 +#ifdef CONFIG_PPC_PS3 FW_FEATURE_PS3_ALWAYS & #endif FW_FEATURE_POSSIBLE, -- cgit v1.2.3-70-g09d2 From e22ba7e38144c1cccac5024cfd6ec88bb64d3e1f Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Mon, 27 Nov 2006 19:18:57 +0100 Subject: [POWERPC] ps3: multiplatform build fixes A few code paths need to check whether or not they are running on the PS3's LV1 hypervisor before making hcalls. This introduces a new firmware feature bit for this, FW_FEATURE_PS3_LV1. Now when both PS3 and IBM_CELL_BLADE are enabled, but not PSERIES, FW_FEATURE_PS3_LV1 and FW_FEATURE_LPAR get enabled at compile time, which is a bug. The same problem can also happen for (PPC_ISERIES && !PPC_PSERIES && PPC_SOMETHING_ELSE). In order to solve this, I introduce a new CONFIG_PPC_NATIVE option that is set when at least one platform is selected that can run without a hypervisor and then turns the firmware feature check into a run-time option. The new cell oprofile support that was recently merged does not work on hypervisor based platforms like the PS3, therefore make it depend on PPC_CELL_NATIVE instead of PPC_CELL. This may change if we get oprofile support for PS3. Signed-off-by: Arnd Bergmann --- arch/powerpc/Kconfig | 26 +++++++++++++++++++++----- arch/powerpc/mm/Makefile | 2 +- arch/powerpc/oprofile/Makefile | 2 +- arch/powerpc/oprofile/common.c | 2 +- arch/powerpc/platforms/ps3/mm.c | 4 ++++ arch/powerpc/platforms/ps3/setup.c | 2 +- drivers/ps3/system-bus.c | 4 ++++ include/asm-powerpc/firmware.h | 13 +++++++++++-- 8 files changed, 44 insertions(+), 11 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index c0146a40c6f..c04b7138e1a 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -390,6 +390,7 @@ config PPC_PSERIES select PPC_RTAS select RTAS_ERROR_LOGGING select PPC_UDBG_16550 + select PPC_NATIVE default y config PPC_ISERIES @@ -406,6 +407,7 @@ config PPC_CHRP select PPC_RTAS select PPC_MPC106 select PPC_UDBG_16550 + select PPC_NATIVE default y config PPC_EFIKA @@ -414,6 +416,7 @@ config PPC_EFIKA select PPC_RTAS select RTAS_PROC select PPC_MPC52xx + select PPC_NATIVE default y config PPC_PMAC @@ -422,6 +425,7 @@ config PPC_PMAC select MPIC select PPC_INDIRECT_PCI if PPC32 select PPC_MPC106 if PPC32 + select PPC_NATIVE default y config PPC_PMAC64 @@ -441,6 +445,7 @@ config PPC_PREP select PPC_I8259 select PPC_INDIRECT_PCI select PPC_UDBG_16550 + select PPC_NATIVE default y config PPC_MAPLE @@ -452,6 +457,7 @@ config PPC_MAPLE select GENERIC_TBSYNC select PPC_UDBG_16550 select PPC_970_NAP + select PPC_NATIVE default n help This option enables support for the Maple 970FX Evaluation Board. @@ -464,6 +470,7 @@ config PPC_PASEMI select MPIC select PPC_UDBG_16550 select GENERIC_TBSYNC + select PPC_NATIVE help This option enables support for PA Semi's PWRficient line of SoC processors, including PA6T-1682M @@ -478,6 +485,7 @@ config PPC_CELL_NATIVE select PPC_DCR_MMIO select PPC_OF_PLATFORM_PCI select PPC_INDIRECT_IO + select PPC_NATIVE select MPIC default n @@ -490,11 +498,6 @@ config PPC_IBM_CELL_BLADE select PPC_UDBG_16550 select UDBG_RTAS_CONSOLE -config UDBG_RTAS_CONSOLE - bool "RTAS based debug console" - depends on PPC_RTAS - default n - config PPC_PS3 bool "Sony PS3" depends on PPC_MULTIPLATFORM && PPC64 @@ -503,6 +506,19 @@ config PPC_PS3 This option enables support for the Sony PS3 game console and other platforms using the PS3 hypervisor. +config PPC_NATIVE + bool + depends on PPC_MULTIPLATFORM + help + Support for running natively on the hardware, i.e. without + a hypervisor. This option is not user-selectable but should + be selected by all platforms that need it. + +config UDBG_RTAS_CONSOLE + bool "RTAS based debug console" + depends on PPC_RTAS + default n + config XICS depends on PPC_PSERIES bool diff --git a/arch/powerpc/mm/Makefile b/arch/powerpc/mm/Makefile index 93441e7a292..38a81967ca0 100644 --- a/arch/powerpc/mm/Makefile +++ b/arch/powerpc/mm/Makefile @@ -8,7 +8,7 @@ endif obj-y := fault.o mem.o lmb.o obj-$(CONFIG_PPC32) += init_32.o pgtable_32.o mmu_context_32.o -hash-$(CONFIG_PPC_MULTIPLATFORM) := hash_native_64.o +hash-$(CONFIG_PPC_NATIVE) := hash_native_64.o obj-$(CONFIG_PPC64) += init_64.o pgtable_64.o mmu_context_64.o \ hash_utils_64.o hash_low_64.o tlb_64.o \ slb_low.o slb.o stab.o mmap.o imalloc.o \ diff --git a/arch/powerpc/oprofile/Makefile b/arch/powerpc/oprofile/Makefile index 51c510fed7f..4ccef2d5530 100644 --- a/arch/powerpc/oprofile/Makefile +++ b/arch/powerpc/oprofile/Makefile @@ -11,7 +11,7 @@ DRIVER_OBJS := $(addprefix ../../../drivers/oprofile/, \ timer_int.o ) oprofile-y := $(DRIVER_OBJS) common.o backtrace.o -oprofile-$(CONFIG_PPC_CELL) += op_model_cell.o +oprofile-$(CONFIG_PPC_CELL_NATIVE) += op_model_cell.o oprofile-$(CONFIG_PPC64) += op_model_rs64.o op_model_power4.o oprofile-$(CONFIG_FSL_BOOKE) += op_model_fsl_booke.o oprofile-$(CONFIG_6xx) += op_model_7450.o diff --git a/arch/powerpc/oprofile/common.c b/arch/powerpc/oprofile/common.c index 7a423437977..b6d82390b6a 100644 --- a/arch/powerpc/oprofile/common.c +++ b/arch/powerpc/oprofile/common.c @@ -147,7 +147,7 @@ int __init oprofile_arch_init(struct oprofile_operations *ops) switch (cur_cpu_spec->oprofile_type) { #ifdef CONFIG_PPC64 -#ifdef CONFIG_PPC_CELL +#ifdef CONFIG_PPC_CELL_NATIVE case PPC_OPROFILE_CELL: model = &op_model_cell; break; diff --git a/arch/powerpc/platforms/ps3/mm.c b/arch/powerpc/platforms/ps3/mm.c index a57f7036dd1..49c0d010d49 100644 --- a/arch/powerpc/platforms/ps3/mm.c +++ b/arch/powerpc/platforms/ps3/mm.c @@ -22,6 +22,7 @@ #include #include +#include #include #include #include @@ -293,6 +294,9 @@ static int __init ps3_mm_add_memory(void) unsigned long start_pfn; unsigned long nr_pages; + if (!firmware_has_feature(FW_FEATURE_PS3_LV1)) + return 0; + BUG_ON(!mem_init_done); start_addr = USE_LPAR_ADDR ? map.r1.base : map.rm.size; diff --git a/arch/powerpc/platforms/ps3/setup.c b/arch/powerpc/platforms/ps3/setup.c index c1f6de50654..d8b5cadbe80 100644 --- a/arch/powerpc/platforms/ps3/setup.c +++ b/arch/powerpc/platforms/ps3/setup.c @@ -108,7 +108,7 @@ static int __init ps3_probe(void) if (!of_flat_dt_is_compatible(dt_root, "PS3")) return 0; - powerpc_firmware_features |= FW_FEATURE_LPAR; + powerpc_firmware_features |= FW_FEATURE_PS3_POSSIBLE; ps3_os_area_init(); ps3_mm_init(); diff --git a/drivers/ps3/system-bus.c b/drivers/ps3/system-bus.c index e19992c4db4..d79f949bcb2 100644 --- a/drivers/ps3/system-bus.c +++ b/drivers/ps3/system-bus.c @@ -27,6 +27,7 @@ #include #include #include +#include #define dump_mmio_region(_a) _dump_mmio_region(_a, __func__, __LINE__) static void _dump_mmio_region(const struct ps3_mmio_region* r, @@ -167,6 +168,9 @@ int __init ps3_system_bus_init(void) { int result; + if (!firmware_has_feature(FW_FEATURE_PS3_LV1)) + return 0; + result = bus_register(&ps3_system_bus_type); BUG_ON(result); return result; diff --git a/include/asm-powerpc/firmware.h b/include/asm-powerpc/firmware.h index 84d43d6e13e..98f7b62422c 100644 --- a/include/asm-powerpc/firmware.h +++ b/include/asm-powerpc/firmware.h @@ -42,6 +42,7 @@ #define FW_FEATURE_SPLPAR ASM_CONST(0x0000000000100000) #define FW_FEATURE_ISERIES ASM_CONST(0x0000000000200000) #define FW_FEATURE_LPAR ASM_CONST(0x0000000000400000) +#define FW_FEATURE_PS3_LV1 ASM_CONST(0x0000000000800000) #ifndef __ASSEMBLY__ @@ -58,8 +59,10 @@ enum { FW_FEATURE_PSERIES_ALWAYS = 0, FW_FEATURE_ISERIES_POSSIBLE = FW_FEATURE_ISERIES | FW_FEATURE_LPAR, FW_FEATURE_ISERIES_ALWAYS = FW_FEATURE_ISERIES | FW_FEATURE_LPAR, - FW_FEATURE_PS3_POSSIBLE = FW_FEATURE_LPAR, - FW_FEATURE_PS3_ALWAYS = FW_FEATURE_LPAR, + FW_FEATURE_PS3_POSSIBLE = FW_FEATURE_LPAR | FW_FEATURE_PS3_LV1, + FW_FEATURE_PS3_ALWAYS = FW_FEATURE_LPAR | FW_FEATURE_PS3_LV1, + FW_FEATURE_NATIVE_POSSIBLE = 0, + FW_FEATURE_NATIVE_ALWAYS = 0, FW_FEATURE_POSSIBLE = #ifdef CONFIG_PPC_PSERIES FW_FEATURE_PSERIES_POSSIBLE | @@ -69,6 +72,9 @@ enum { #endif #ifdef CONFIG_PPC_PS3 FW_FEATURE_PS3_POSSIBLE | +#endif +#ifdef CONFIG_PPC_NATIVE + FW_FEATURE_NATIVE_ALWAYS | #endif 0, FW_FEATURE_ALWAYS = @@ -80,6 +86,9 @@ enum { #endif #ifdef CONFIG_PPC_PS3 FW_FEATURE_PS3_ALWAYS & +#endif +#ifdef CONFIG_PPC_NATIVE + FW_FEATURE_NATIVE_ALWAYS & #endif FW_FEATURE_POSSIBLE, -- cgit v1.2.3-70-g09d2 From 4ec64d5686112e9c5a9f1eeeb0eeedd54fb07d69 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Mon, 27 Nov 2006 19:18:58 +0100 Subject: [POWERPC] ps3: add a default zImage target It's currently not possible to build the default zImage target if PS3 is the only selected platform. This is a hack to fall back to building the pseries style zImage, so the build is successful. This will probably change in the future, if someone writes a PS3 specific boot wrapper. Signed-off-by: Arnd Bergmann --- arch/powerpc/boot/Makefile | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/powerpc') diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile index 22e90168723..b320562c03b 100644 --- a/arch/powerpc/boot/Makefile +++ b/arch/powerpc/boot/Makefile @@ -155,6 +155,7 @@ $(obj)/uImage: vmlinux $(wrapperbits) image-$(CONFIG_PPC_PSERIES) += zImage.pseries image-$(CONFIG_PPC_MAPLE) += zImage.pseries image-$(CONFIG_PPC_IBM_CELL_BLADE) += zImage.pseries +image-$(CONFIG_PPC_PS3) += zImage.pseries image-$(CONFIG_PPC_CHRP) += zImage.chrp image-$(CONFIG_PPC_EFIKA) += zImage.chrp image-$(CONFIG_PPC_PMAC) += zImage.pmac -- cgit v1.2.3-70-g09d2 From 369cf4b940d0d92d33f39a2df11102f3e2df0e0a Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Mon, 27 Nov 2006 19:18:59 +0100 Subject: [POWERPC] fix missing #include in sys_ppc32.c sys_mmap is declared in asm/syscalls.h Signed-off-by: Arnd Bergmann --- arch/powerpc/kernel/sys_ppc32.c | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/powerpc') diff --git a/arch/powerpc/kernel/sys_ppc32.c b/arch/powerpc/kernel/sys_ppc32.c index d15c33e9595..03a2a2f30d6 100644 --- a/arch/powerpc/kernel/sys_ppc32.c +++ b/arch/powerpc/kernel/sys_ppc32.c @@ -51,6 +51,7 @@ #include #include #include +#include /* readdir & getdents */ #define NAME_OFFSET(de) ((int) ((de)->d_name - (char __user *) (de))) -- cgit v1.2.3-70-g09d2 From a5715d6dfc85e002bfad68bb2858cf5a248e2060 Mon Sep 17 00:00:00 2001 From: Mohan Kumar M Date: Fri, 17 Nov 2006 17:42:24 +0530 Subject: [POWERPC] pSeries/kexec: Fix for interrupt distribution This allows any secondary CPU thread also to become boot cpu for POWER5. The patch is required to solve kdump boot issue when the kdump kernel is booted with parameter "maxcpus=1". XICS init code tries to match the current boot cpu id with "reg" property in each CPU node in the device tree. But CPU node is created only for primary thread CPU ids and "reg" property only reflects primary CPU ids. So when a kernel is booted on a secondary cpu thread above condition will never meet and the default distribution server is left as zero. This leads to route the interrupts to CPU 0, but which is not online at this time. We use ibm,ppc-interrupt-server#s to check for both primary and secondary CPU ids. Accordingly default distribution server value is initialized from "ibm,ppc-interrupt-gserver#s" property. We loop through ibm,ppc-interrupt-gserver#s property to find the global distribution server from the last entry that matches with boot cpuid. Signed-off-by: Mohan Kumar M Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/pseries/xics.c | 68 +++++++++++++++++++++++++---------- 1 file changed, 49 insertions(+), 19 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/platforms/pseries/xics.c b/arch/powerpc/platforms/pseries/xics.c index d071abe78ab..b5b2b1103de 100644 --- a/arch/powerpc/platforms/pseries/xics.c +++ b/arch/powerpc/platforms/pseries/xics.c @@ -656,13 +656,38 @@ static void __init xics_setup_8259_cascade(void) set_irq_chained_handler(cascade, pseries_8259_cascade); } +static struct device_node *cpuid_to_of_node(int cpu) +{ + struct device_node *np; + u32 hcpuid = get_hard_smp_processor_id(cpu); + + for_each_node_by_type(np, "cpu") { + int i, len; + const u32 *intserv; + + intserv = get_property(np, "ibm,ppc-interrupt-server#s", &len); + + if (!intserv) + intserv = get_property(np, "reg", &len); + + i = len / sizeof(u32); + + while (i--) + if (intserv[i] == hcpuid) + return np; + } + + return NULL; +} + void __init xics_init_IRQ(void) { - int i; + int i, j; struct device_node *np; u32 ilen, indx = 0; - const u32 *ireg; + const u32 *ireg, *isize; int found = 0; + u32 hcpuid; ppc64_boot_msg(0x20, "XICS Init"); @@ -683,26 +708,31 @@ void __init xics_init_IRQ(void) xics_init_host(); /* Find the server numbers for the boot cpu. */ - for (np = of_find_node_by_type(NULL, "cpu"); - np; - np = of_find_node_by_type(np, "cpu")) { - ireg = get_property(np, "reg", &ilen); - if (ireg && ireg[0] == get_hard_smp_processor_id(boot_cpuid)) { - ireg = get_property(np, - "ibm,ppc-interrupt-gserver#s", &ilen); - i = ilen / sizeof(int); - if (ireg && i > 0) { - default_server = ireg[0]; - /* take last element */ - default_distrib_server = ireg[i-1]; - } - ireg = get_property(np, + np = cpuid_to_of_node(boot_cpuid); + BUG_ON(!np); + ireg = get_property(np, "ibm,ppc-interrupt-gserver#s", &ilen); + if (!ireg) + goto skip_gserver_check; + i = ilen / sizeof(int); + hcpuid = get_hard_smp_processor_id(boot_cpuid); + + /* Global interrupt distribution server is specified in the last + * entry of "ibm,ppc-interrupt-gserver#s" property. Get the last + * entry fom this property for current boot cpu id and use it as + * default distribution server + */ + for (j = 0; j < i; j += 2) { + if (ireg[j] == hcpuid) { + default_server = hcpuid; + default_distrib_server = ireg[j+1]; + + isize = get_property(np, "ibm,interrupt-server#-size", NULL); - if (ireg) - interrupt_server_size = *ireg; - break; + if (isize) + interrupt_server_size = *isize; } } +skip_gserver_check: of_node_put(np); if (firmware_has_feature(FW_FEATURE_LPAR)) -- cgit v1.2.3-70-g09d2 From 28f9ec349ae47c91768b7bc5607db4442c818e11 Mon Sep 17 00:00:00 2001 From: Vitaly Wool Date: Mon, 20 Nov 2006 16:32:39 +0300 Subject: [POWERPC] Add of_platform support for ROM devices This adds support for flash device descriptions to the OF device tree. It's inspired by and partially borrowed from Sergei's patch "[RFC] Adding MTD to device tree.patch". Signed-off-by: Vitaly Wool Signed-off-by: Sergei Shtylyov Signed-off-by: Paul Mackerras --- Documentation/powerpc/booting-without-of.txt | 39 ++++++++++++++++++++++++++++ arch/powerpc/sysdev/Makefile | 1 + arch/powerpc/sysdev/rom.c | 31 ++++++++++++++++++++++ 3 files changed, 71 insertions(+) create mode 100644 arch/powerpc/sysdev/rom.c (limited to 'arch/powerpc') diff --git a/Documentation/powerpc/booting-without-of.txt b/Documentation/powerpc/booting-without-of.txt index 4ac2d641fcb..b3bd36668db 100644 --- a/Documentation/powerpc/booting-without-of.txt +++ b/Documentation/powerpc/booting-without-of.txt @@ -6,6 +6,8 @@ IBM Corp. (c) 2005 Becky Bruce , Freescale Semiconductor, FSL SOC and 32-bit additions +(c) 2006 MontaVista Software, Inc. + Flash chip node definition May 18, 2005: Rev 0.1 - Initial draft, no chapter III yet. @@ -1693,6 +1695,43 @@ platforms are moved over to use the flattened-device-tree model. }; }; + g) Flash chip nodes + + Flash chips (Memory Technology Devices) are often used for solid state + file systems on embedded devices. + + Required properties: + + - device_type : has to be "rom" + - compatible : Should specify what this ROM device is compatible with + (i.e. "onenand"). Currently, this is most likely to be "direct-mapped" + (which corresponds to the MTD physmap mapping driver). + - regs : Offset and length of the register set (or memory mapping) for + the device. + + Recommended properties : + + - bank-width : Width of the flash data bus in bytes. Required + for the NOR flashes (compatible == "direct-mapped" and others) ONLY. + - partitions : Several pairs of 32-bit values where the first value is + partition's offset from the start of the device and the second one is + partition size in bytes with LSB used to signify a read only + partititon (so, the parition size should always be an even number). + - partition-names : The list of concatenated zero terminated strings + representing the partition names. + + Example: + + flash@ff000000 { + device_type = "rom"; + compatible = "direct-mapped"; + regs = ; + bank-width = <4>; + partitions = <00000000 00f80000 + 00f80000 00080001>; + partition-names = "fs\0firmware"; + }; + More devices will be defined as this spec matures. diff --git a/arch/powerpc/sysdev/Makefile b/arch/powerpc/sysdev/Makefile index bae874626fc..ee7c6d48af7 100644 --- a/arch/powerpc/sysdev/Makefile +++ b/arch/powerpc/sysdev/Makefile @@ -11,6 +11,7 @@ obj-$(CONFIG_MMIO_NVRAM) += mmio_nvram.o obj-$(CONFIG_FSL_SOC) += fsl_soc.o obj-$(CONFIG_TSI108_BRIDGE) += tsi108_pci.o tsi108_dev.o obj-$(CONFIG_QUICC_ENGINE) += qe_lib/ +obj-$(CONFIG_MTD) += rom.o ifeq ($(CONFIG_PPC_MERGE),y) obj-$(CONFIG_PPC_I8259) += i8259.o diff --git a/arch/powerpc/sysdev/rom.c b/arch/powerpc/sysdev/rom.c new file mode 100644 index 00000000000..bf5b3f10e6c --- /dev/null +++ b/arch/powerpc/sysdev/rom.c @@ -0,0 +1,31 @@ +/* + * ROM device registration + * + * (C) 2006 MontaVista Software, Inc. This file is licensed under + * the terms of the GNU General Public License version 2. This program + * is licensed "as is" without any warranty of any kind, whether express + * or implied. + */ + +#include +#include + +static int __init powerpc_flash_init(void) +{ + struct device_node *node = NULL; + + /* + * Register all the devices which type is "rom" + */ + while ((node = of_find_node_by_type(node, "rom")) != NULL) { + if (node->name == NULL) { + printk(KERN_WARNING "powerpc_flash_init: found 'rom' " + "device, but with no name, skipping...\n"); + continue; + } + of_platform_device_create(node, node->name, NULL); + } + return 0; +} + +arch_initcall(powerpc_flash_init); -- cgit v1.2.3-70-g09d2 From 06f2138e61d4f5dce82207236767e0759bbd45cc Mon Sep 17 00:00:00 2001 From: Rutger Nijlunsing Date: Sun, 26 Nov 2006 21:08:38 +0100 Subject: [POWERPC] Add files build to .gitignore Mostly taken from corresponding Makefile's make-clean rule. Tested by (cross)compiling for $ARCH PPC and POWERPC and checking output of git-status. Signed-off-by: Rutger Nijlunsing Signed-off-by: Paul Mackerras --- arch/powerpc/.gitignore | 1 + arch/powerpc/boot/.gitignore | 8 +++++++- arch/ppc/.gitignore | 1 + arch/ppc/boot/images/.gitignore | 6 ++++++ arch/ppc/boot/lib/.gitignore | 3 +++ arch/ppc/boot/utils/.gitignore | 3 +++ 6 files changed, 21 insertions(+), 1 deletion(-) create mode 100644 arch/powerpc/.gitignore create mode 100644 arch/ppc/.gitignore create mode 100644 arch/ppc/boot/images/.gitignore create mode 100644 arch/ppc/boot/lib/.gitignore create mode 100644 arch/ppc/boot/utils/.gitignore (limited to 'arch/powerpc') diff --git a/arch/powerpc/.gitignore b/arch/powerpc/.gitignore new file mode 100644 index 00000000000..a1a869c8c84 --- /dev/null +++ b/arch/powerpc/.gitignore @@ -0,0 +1 @@ +include diff --git a/arch/powerpc/boot/.gitignore b/arch/powerpc/boot/.gitignore index 590e72f06d5..0734b2fc1d9 100644 --- a/arch/powerpc/boot/.gitignore +++ b/arch/powerpc/boot/.gitignore @@ -19,9 +19,15 @@ kernel-vmlinux.strip.gz mktree uImage zImage -zImage.vmode +zImage.chrp +zImage.coff zImage.coff.lds zImage.lds +zImage.miboot +zImage.pmac +zImage.pseries +zImage.sandpoint +zImage.vmode zconf.h zlib.h zutil.h diff --git a/arch/ppc/.gitignore b/arch/ppc/.gitignore new file mode 100644 index 00000000000..a1a869c8c84 --- /dev/null +++ b/arch/ppc/.gitignore @@ -0,0 +1 @@ +include diff --git a/arch/ppc/boot/images/.gitignore b/arch/ppc/boot/images/.gitignore new file mode 100644 index 00000000000..21c2dc5b6b7 --- /dev/null +++ b/arch/ppc/boot/images/.gitignore @@ -0,0 +1,6 @@ +sImage +vmapus +vmlinux* +miboot* +zImage* +uImage diff --git a/arch/ppc/boot/lib/.gitignore b/arch/ppc/boot/lib/.gitignore new file mode 100644 index 00000000000..1629a616775 --- /dev/null +++ b/arch/ppc/boot/lib/.gitignore @@ -0,0 +1,3 @@ +inffast.c +inflate.c +inftrees.c diff --git a/arch/ppc/boot/utils/.gitignore b/arch/ppc/boot/utils/.gitignore new file mode 100644 index 00000000000..bbdfb3b9c53 --- /dev/null +++ b/arch/ppc/boot/utils/.gitignore @@ -0,0 +1,3 @@ +mkprep +mkbugboot +mktree -- cgit v1.2.3-70-g09d2 From c705677e1c69012adea3bc51b54e9c7170d1cbee Mon Sep 17 00:00:00 2001 From: Stephen Rothwell Date: Mon, 27 Nov 2006 14:59:50 +1100 Subject: [POWERPC] iSeries: Eliminate "exceeds stub group size" warnings Commit 3ccfc65c5004e5fe5cfbffe43b8acc686680b53e missed the same fixes for legacy iSeries specific code, so make some more symbols no longer global. Signed-off-by: Stephen Rothwell Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/entry_64.S | 4 +++- arch/powerpc/kernel/head_64.S | 10 ++++------ 2 files changed, 7 insertions(+), 7 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/kernel/entry_64.S b/arch/powerpc/kernel/entry_64.S index ec754c92ba9..1a3d4de197d 100644 --- a/arch/powerpc/kernel/entry_64.S +++ b/arch/powerpc/kernel/entry_64.S @@ -97,7 +97,9 @@ BEGIN_FW_FTR_SECTION cmpdi cr1,r0,0x5555 /* syscall 0x5555 */ andi. r10,r12,MSR_PR /* from kernel */ crand 4*cr0+eq,4*cr1+eq,4*cr0+eq - beq hardware_interrupt_entry + bne 2f + b hardware_interrupt_entry +2: END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES) #endif mfmsr r11 diff --git a/arch/powerpc/kernel/head_64.S b/arch/powerpc/kernel/head_64.S index 8cdff5a1f3e..71b1fe58e9e 100644 --- a/arch/powerpc/kernel/head_64.S +++ b/arch/powerpc/kernel/head_64.S @@ -825,7 +825,7 @@ system_reset_iSeries: cmpwi 0,r23,0 beq iSeries_secondary_smp_loop /* Loop until told to go */ - bne .__secondary_start /* Loop until told to go */ + bne __secondary_start /* Loop until told to go */ iSeries_secondary_smp_loop: /* Let the Hypervisor know we are alive */ /* 8002 is a call to HvCallCfg::getLps, a harmless Hypervisor function */ @@ -846,7 +846,6 @@ iSeries_secondary_smp_loop: b 1b /* If SMP not configured, secondaries * loop forever */ - .globl decrementer_iSeries_masked decrementer_iSeries_masked: /* We may not have a valid TOC pointer in here. */ li r11,1 @@ -857,7 +856,6 @@ decrementer_iSeries_masked: mtspr SPRN_DEC,r12 /* fall through */ - .globl hardware_interrupt_iSeries_masked hardware_interrupt_iSeries_masked: mtcrf 0x80,r9 /* Restore regs */ ld r12,PACALPPACAPTR(r13) @@ -1604,7 +1602,7 @@ _GLOBAL(generic_secondary_smp_init) ld r1,PACAEMERGSP(r13) subi r1,r1,STACK_FRAME_OVERHEAD - b .__secondary_start + b __secondary_start #endif #ifdef CONFIG_PPC_ISERIES @@ -1873,7 +1871,7 @@ _GLOBAL(pmac_secondary_start) ld r1,PACAEMERGSP(r13) subi r1,r1,STACK_FRAME_OVERHEAD - b .__secondary_start + b __secondary_start #endif /* CONFIG_PPC_PMAC */ @@ -1890,7 +1888,7 @@ _GLOBAL(pmac_secondary_start) * r13 = paca virtual address * SPRG3 = paca virtual address */ -_GLOBAL(__secondary_start) +__secondary_start: /* Set thread priority to MEDIUM */ HMT_MEDIUM -- cgit v1.2.3-70-g09d2 From f5b2eb026949e7c3988074529854609921675cff Mon Sep 17 00:00:00 2001 From: Stephen Rothwell Date: Mon, 27 Nov 2006 17:17:02 +1100 Subject: [POWERPC] iSeries: allow CONFIG_CMDLINE It doesn't hurt to have this enabled on legacy iSeries and will mean it is available for a combined build. Signed-off-by: Stephen Rothwell Signed-off-by: Paul Mackerras --- arch/powerpc/Kconfig | 1 - 1 file changed, 1 deletion(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index c04b7138e1a..836caf1e943 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -852,7 +852,6 @@ source "arch/powerpc/platforms/prep/Kconfig" config CMDLINE_BOOL bool "Default bootloader kernel arguments" - depends on !PPC_ISERIES config CMDLINE string "Initial kernel command string" -- cgit v1.2.3-70-g09d2 From 39d074b2e4b89c914c00dfd9987672e2dea92f19 Mon Sep 17 00:00:00 2001 From: Grant Likely Date: Mon, 27 Nov 2006 14:16:23 -0700 Subject: [POWERPC] Move MPC52xx PIC driver into arch/powerpc/platforms/52xx No other chips use this device, it belongs in a 52xx-specific path. Signed-off-by: Grant Likely Signed-off-by: Sylvain Munaut Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/52xx/Makefile | 6 + arch/powerpc/platforms/52xx/mpc52xx_pic.c | 538 ++++++++++++++++++++++++++++++ arch/powerpc/platforms/Makefile | 1 + arch/powerpc/sysdev/Makefile | 1 - arch/powerpc/sysdev/mpc52xx_pic.c | 538 ------------------------------ 5 files changed, 545 insertions(+), 539 deletions(-) create mode 100644 arch/powerpc/platforms/52xx/Makefile create mode 100644 arch/powerpc/platforms/52xx/mpc52xx_pic.c delete mode 100644 arch/powerpc/sysdev/mpc52xx_pic.c (limited to 'arch/powerpc') diff --git a/arch/powerpc/platforms/52xx/Makefile b/arch/powerpc/platforms/52xx/Makefile new file mode 100644 index 00000000000..e1b02f1a189 --- /dev/null +++ b/arch/powerpc/platforms/52xx/Makefile @@ -0,0 +1,6 @@ +# +# Makefile for 52xx based boards +# +ifeq ($(CONFIG_PPC_MERGE),y) +obj-y += mpc52xx_pic.o +endif diff --git a/arch/powerpc/platforms/52xx/mpc52xx_pic.c b/arch/powerpc/platforms/52xx/mpc52xx_pic.c new file mode 100644 index 00000000000..6df51f04b8f --- /dev/null +++ b/arch/powerpc/platforms/52xx/mpc52xx_pic.c @@ -0,0 +1,538 @@ +/* + * + * Programmable Interrupt Controller functions for the Freescale MPC52xx. + * + * Copyright (C) 2006 bplan GmbH + * + * Based on the code from the 2.4 kernel by + * Dale Farnsworth and Kent Borg. + * + * Copyright (C) 2004 Sylvain Munaut + * Copyright (C) 2003 Montavista Software, Inc + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + * + */ + +#undef DEBUG + +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include + +/* + * +*/ + +static struct mpc52xx_intr __iomem *intr; +static struct mpc52xx_sdma __iomem *sdma; +static struct irq_host *mpc52xx_irqhost = NULL; + +static unsigned char mpc52xx_map_senses[4] = { + IRQ_TYPE_LEVEL_HIGH, + IRQ_TYPE_EDGE_RISING, + IRQ_TYPE_EDGE_FALLING, + IRQ_TYPE_LEVEL_LOW, +}; + +/* + * +*/ + +static inline void io_be_setbit(u32 __iomem * addr, int bitno) +{ + out_be32(addr, in_be32(addr) | (1 << bitno)); +} + +static inline void io_be_clrbit(u32 __iomem * addr, int bitno) +{ + out_be32(addr, in_be32(addr) & ~(1 << bitno)); +} + +/* + * IRQ[0-3] interrupt irq_chip +*/ + +static void mpc52xx_extirq_mask(unsigned int virq) +{ + int irq; + int l2irq; + + irq = irq_map[virq].hwirq; + l2irq = (irq & MPC52xx_IRQ_L2_MASK) >> MPC52xx_IRQ_L2_OFFSET; + + pr_debug("%s: irq=%x. l2=%d\n", __func__, irq, l2irq); + + io_be_clrbit(&intr->ctrl, 11 - l2irq); +} + +static void mpc52xx_extirq_unmask(unsigned int virq) +{ + int irq; + int l2irq; + + irq = irq_map[virq].hwirq; + l2irq = (irq & MPC52xx_IRQ_L2_MASK) >> MPC52xx_IRQ_L2_OFFSET; + + pr_debug("%s: irq=%x. l2=%d\n", __func__, irq, l2irq); + + io_be_setbit(&intr->ctrl, 11 - l2irq); +} + +static void mpc52xx_extirq_ack(unsigned int virq) +{ + int irq; + int l2irq; + + irq = irq_map[virq].hwirq; + l2irq = (irq & MPC52xx_IRQ_L2_MASK) >> MPC52xx_IRQ_L2_OFFSET; + + pr_debug("%s: irq=%x. l2=%d\n", __func__, irq, l2irq); + + io_be_setbit(&intr->ctrl, 27 - l2irq); +} + +static struct irq_chip mpc52xx_extirq_irqchip = { + .typename = " MPC52xx IRQ[0-3] ", + .mask = mpc52xx_extirq_mask, + .unmask = mpc52xx_extirq_unmask, + .ack = mpc52xx_extirq_ack, +}; + +/* + * Main interrupt irq_chip +*/ + +static void mpc52xx_main_mask(unsigned int virq) +{ + int irq; + int l2irq; + + irq = irq_map[virq].hwirq; + l2irq = (irq & MPC52xx_IRQ_L2_MASK) >> MPC52xx_IRQ_L2_OFFSET; + + pr_debug("%s: irq=%x. l2=%d\n", __func__, irq, l2irq); + + io_be_setbit(&intr->main_mask, 15 - l2irq); +} + +static void mpc52xx_main_unmask(unsigned int virq) +{ + int irq; + int l2irq; + + irq = irq_map[virq].hwirq; + l2irq = (irq & MPC52xx_IRQ_L2_MASK) >> MPC52xx_IRQ_L2_OFFSET; + + pr_debug("%s: irq=%x. l2=%d\n", __func__, irq, l2irq); + + io_be_clrbit(&intr->main_mask, 15 - l2irq); +} + +static struct irq_chip mpc52xx_main_irqchip = { + .typename = "MPC52xx Main", + .mask = mpc52xx_main_mask, + .mask_ack = mpc52xx_main_mask, + .unmask = mpc52xx_main_unmask, +}; + +/* + * Peripherals interrupt irq_chip +*/ + +static void mpc52xx_periph_mask(unsigned int virq) +{ + int irq; + int l2irq; + + irq = irq_map[virq].hwirq; + l2irq = (irq & MPC52xx_IRQ_L2_MASK) >> MPC52xx_IRQ_L2_OFFSET; + + pr_debug("%s: irq=%x. l2=%d\n", __func__, irq, l2irq); + + io_be_setbit(&intr->per_mask, 31 - l2irq); +} + +static void mpc52xx_periph_unmask(unsigned int virq) +{ + int irq; + int l2irq; + + irq = irq_map[virq].hwirq; + l2irq = (irq & MPC52xx_IRQ_L2_MASK) >> MPC52xx_IRQ_L2_OFFSET; + + pr_debug("%s: irq=%x. l2=%d\n", __func__, irq, l2irq); + + io_be_clrbit(&intr->per_mask, 31 - l2irq); +} + +static struct irq_chip mpc52xx_periph_irqchip = { + .typename = "MPC52xx Peripherals", + .mask = mpc52xx_periph_mask, + .mask_ack = mpc52xx_periph_mask, + .unmask = mpc52xx_periph_unmask, +}; + +/* + * SDMA interrupt irq_chip +*/ + +static void mpc52xx_sdma_mask(unsigned int virq) +{ + int irq; + int l2irq; + + irq = irq_map[virq].hwirq; + l2irq = (irq & MPC52xx_IRQ_L2_MASK) >> MPC52xx_IRQ_L2_OFFSET; + + pr_debug("%s: irq=%x. l2=%d\n", __func__, irq, l2irq); + + io_be_setbit(&sdma->IntMask, l2irq); +} + +static void mpc52xx_sdma_unmask(unsigned int virq) +{ + int irq; + int l2irq; + + irq = irq_map[virq].hwirq; + l2irq = (irq & MPC52xx_IRQ_L2_MASK) >> MPC52xx_IRQ_L2_OFFSET; + + pr_debug("%s: irq=%x. l2=%d\n", __func__, irq, l2irq); + + io_be_clrbit(&sdma->IntMask, l2irq); +} + +static void mpc52xx_sdma_ack(unsigned int virq) +{ + int irq; + int l2irq; + + irq = irq_map[virq].hwirq; + l2irq = (irq & MPC52xx_IRQ_L2_MASK) >> MPC52xx_IRQ_L2_OFFSET; + + pr_debug("%s: irq=%x. l2=%d\n", __func__, irq, l2irq); + + out_be32(&sdma->IntPend, 1 << l2irq); +} + +static struct irq_chip mpc52xx_sdma_irqchip = { + .typename = "MPC52xx SDMA", + .mask = mpc52xx_sdma_mask, + .unmask = mpc52xx_sdma_unmask, + .ack = mpc52xx_sdma_ack, +}; + +/* + * irq_host +*/ + +static int mpc52xx_irqhost_match(struct irq_host *h, struct device_node *node) +{ + pr_debug("%s: node=%p\n", __func__, node); + return mpc52xx_irqhost->host_data == node; +} + +static int mpc52xx_irqhost_xlate(struct irq_host *h, struct device_node *ct, + u32 * intspec, unsigned int intsize, + irq_hw_number_t * out_hwirq, + unsigned int *out_flags) +{ + int intrvect_l1; + int intrvect_l2; + int intrvect_type; + int intrvect_linux; + + if (intsize != 3) + return -1; + + intrvect_l1 = (int)intspec[0]; + intrvect_l2 = (int)intspec[1]; + intrvect_type = (int)intspec[2]; + + intrvect_linux = + (intrvect_l1 << MPC52xx_IRQ_L1_OFFSET) & MPC52xx_IRQ_L1_MASK; + intrvect_linux |= + (intrvect_l2 << MPC52xx_IRQ_L2_OFFSET) & MPC52xx_IRQ_L2_MASK; + + pr_debug("return %x, l1=%d, l2=%d\n", intrvect_linux, intrvect_l1, + intrvect_l2); + + *out_hwirq = intrvect_linux; + *out_flags = mpc52xx_map_senses[intrvect_type]; + + return 0; +} + +/* + * this function retrieves the correct IRQ type out + * of the MPC regs + * Only externals IRQs needs this +*/ +static int mpc52xx_irqx_gettype(int irq) +{ + int type; + u32 ctrl_reg; + + ctrl_reg = in_be32(&intr->ctrl); + type = (ctrl_reg >> (22 - irq * 2)) & 0x3; + + return mpc52xx_map_senses[type]; +} + +static int mpc52xx_irqhost_map(struct irq_host *h, unsigned int virq, + irq_hw_number_t irq) +{ + int l1irq; + int l2irq; + struct irq_chip *good_irqchip; + void *good_handle; + int type; + + l1irq = (irq & MPC52xx_IRQ_L1_MASK) >> MPC52xx_IRQ_L1_OFFSET; + l2irq = (irq & MPC52xx_IRQ_L2_MASK) >> MPC52xx_IRQ_L2_OFFSET; + + /* + * Most of ours IRQs will be level low + * Only external IRQs on some platform may be others + */ + type = IRQ_TYPE_LEVEL_LOW; + + switch (l1irq) { + case MPC52xx_IRQ_L1_CRIT: + pr_debug("%s: Critical. l2=%x\n", __func__, l2irq); + + BUG_ON(l2irq != 0); + + type = mpc52xx_irqx_gettype(l2irq); + good_irqchip = &mpc52xx_extirq_irqchip; + break; + + case MPC52xx_IRQ_L1_MAIN: + pr_debug("%s: Main IRQ[1-3] l2=%x\n", __func__, l2irq); + + if ((l2irq >= 1) && (l2irq <= 3)) { + type = mpc52xx_irqx_gettype(l2irq); + good_irqchip = &mpc52xx_extirq_irqchip; + } else { + good_irqchip = &mpc52xx_main_irqchip; + } + break; + + case MPC52xx_IRQ_L1_PERP: + pr_debug("%s: Peripherals. l2=%x\n", __func__, l2irq); + good_irqchip = &mpc52xx_periph_irqchip; + break; + + case MPC52xx_IRQ_L1_SDMA: + pr_debug("%s: SDMA. l2=%x\n", __func__, l2irq); + good_irqchip = &mpc52xx_sdma_irqchip; + break; + + default: + pr_debug("%s: Error, unknown L1 IRQ (0x%x)\n", __func__, l1irq); + printk(KERN_ERR "Unknow IRQ!\n"); + return -EINVAL; + } + + switch (type) { + case IRQ_TYPE_EDGE_FALLING: + case IRQ_TYPE_EDGE_RISING: + good_handle = handle_edge_irq; + break; + default: + good_handle = handle_level_irq; + } + + set_irq_chip_and_handler(virq, good_irqchip, good_handle); + + pr_debug("%s: virq=%x, hw=%x. type=%x\n", __func__, virq, + (int)irq, type); + + return 0; +} + +static struct irq_host_ops mpc52xx_irqhost_ops = { + .match = mpc52xx_irqhost_match, + .xlate = mpc52xx_irqhost_xlate, + .map = mpc52xx_irqhost_map, +}; + +/* + * init (public) +*/ + +void __init mpc52xx_init_irq(void) +{ + struct device_node *picnode = NULL; + int picnode_regsize; + u32 picnode_regoffset; + + struct device_node *sdmanode = NULL; + int sdmanode_regsize; + u32 sdmanode_regoffset; + + u64 size64; + int flags; + + u32 intr_ctrl; + + picnode = of_find_compatible_node(NULL, "interrupt-controller", + "mpc5200-pic"); + if (picnode == NULL) { + printk(KERN_ERR "MPC52xx PIC: " + "Unable to find the interrupt controller " + "in the OpenFirmware device tree\n"); + goto end; + } + + sdmanode = of_find_compatible_node(NULL, "dma-controller", + "mpc5200-bestcomm"); + if (sdmanode == NULL) { + printk(KERN_ERR "MPC52xx PIC" + "Unable to find the Bestcomm DMA controller device " + "in the OpenFirmware device tree\n"); + goto end; + } + + /* Retrieve PIC ressources */ + picnode_regoffset = (u32) of_get_address(picnode, 0, &size64, &flags); + if (picnode_regoffset == 0) { + printk(KERN_ERR "MPC52xx PIC" + "Unable to get the interrupt controller address\n"); + goto end; + } + + picnode_regoffset = + of_translate_address(picnode, (u32 *) picnode_regoffset); + picnode_regsize = (int)size64; + + /* Retrieve SDMA ressources */ + sdmanode_regoffset = (u32) of_get_address(sdmanode, 0, &size64, &flags); + if (sdmanode_regoffset == 0) { + printk(KERN_ERR "MPC52xx PIC: " + "Unable to get the Bestcomm DMA controller address\n"); + goto end; + } + + sdmanode_regoffset = + of_translate_address(sdmanode, (u32 *) sdmanode_regoffset); + sdmanode_regsize = (int)size64; + + /* Remap the necessary zones */ + intr = ioremap(picnode_regoffset, picnode_regsize); + if (intr == NULL) { + printk(KERN_ERR "MPC52xx PIC: " + "Unable to ioremap interrupt controller registers!\n"); + goto end; + } + + sdma = ioremap(sdmanode_regoffset, sdmanode_regsize); + if (sdma == NULL) { + iounmap(intr); + printk(KERN_ERR "MPC52xx PIC: " + "Unable to ioremap Bestcomm DMA registers!\n"); + goto end; + } + + printk(KERN_INFO "MPC52xx PIC: MPC52xx PIC Remapped at 0x%8.8x\n", + picnode_regoffset); + printk(KERN_INFO "MPC52xx PIC: MPC52xx SDMA Remapped at 0x%8.8x\n", + sdmanode_regoffset); + + /* Disable all interrupt sources. */ + out_be32(&sdma->IntPend, 0xffffffff); /* 1 means clear pending */ + out_be32(&sdma->IntMask, 0xffffffff); /* 1 means disabled */ + out_be32(&intr->per_mask, 0x7ffffc00); /* 1 means disabled */ + out_be32(&intr->main_mask, 0x00010fff); /* 1 means disabled */ + intr_ctrl = in_be32(&intr->ctrl); + intr_ctrl &= 0x00ff0000; /* Keeps IRQ[0-3] config */ + intr_ctrl |= 0x0f000000 | /* clear IRQ 0-3 */ + 0x00001000 | /* MEE master external enable */ + 0x00000000 | /* 0 means disable IRQ 0-3 */ + 0x00000001; /* CEb route critical normally */ + out_be32(&intr->ctrl, intr_ctrl); + + /* Zero a bunch of the priority settings. */ + out_be32(&intr->per_pri1, 0); + out_be32(&intr->per_pri2, 0); + out_be32(&intr->per_pri3, 0); + out_be32(&intr->main_pri1, 0); + out_be32(&intr->main_pri2, 0); + + /* + * As last step, add an irq host to translate the real + * hw irq information provided by the ofw to linux virq + */ + + mpc52xx_irqhost = + irq_alloc_host(IRQ_HOST_MAP_LINEAR, MPC52xx_IRQ_HIGHTESTHWIRQ, + &mpc52xx_irqhost_ops, -1); + + if (mpc52xx_irqhost) { + mpc52xx_irqhost->host_data = picnode; + printk(KERN_INFO "MPC52xx PIC is up and running!\n"); + } else { + printk(KERN_ERR + "MPC52xx PIC: Unable to allocate the IRQ host\n"); + } + +end: + of_node_put(picnode); + of_node_put(sdmanode); +} + +/* + * get_irq (public) +*/ +unsigned int mpc52xx_get_irq(void) +{ + u32 status; + int irq = NO_IRQ_IGNORE; + + status = in_be32(&intr->enc_status); + if (status & 0x00000400) { /* critical */ + irq = (status >> 8) & 0x3; + if (irq == 2) /* high priority peripheral */ + goto peripheral; + irq |= (MPC52xx_IRQ_L1_CRIT << MPC52xx_IRQ_L1_OFFSET) & + MPC52xx_IRQ_L1_MASK; + } else if (status & 0x00200000) { /* main */ + irq = (status >> 16) & 0x1f; + if (irq == 4) /* low priority peripheral */ + goto peripheral; + irq |= (MPC52xx_IRQ_L1_MAIN << MPC52xx_IRQ_L1_OFFSET) & + MPC52xx_IRQ_L1_MASK; + } else if (status & 0x20000000) { /* peripheral */ + peripheral: + irq = (status >> 24) & 0x1f; + if (irq == 0) { /* bestcomm */ + status = in_be32(&sdma->IntPend); + irq = ffs(status) - 1; + irq |= (MPC52xx_IRQ_L1_SDMA << MPC52xx_IRQ_L1_OFFSET) & + MPC52xx_IRQ_L1_MASK; + } else + irq |= (MPC52xx_IRQ_L1_PERP << MPC52xx_IRQ_L1_OFFSET) & + MPC52xx_IRQ_L1_MASK; + } + + pr_debug("%s: irq=%x. virq=%d\n", __func__, irq, + irq_linear_revmap(mpc52xx_irqhost, irq)); + + return irq_linear_revmap(mpc52xx_irqhost, irq); +} + diff --git a/arch/powerpc/platforms/Makefile b/arch/powerpc/platforms/Makefile index 52984a803e7..468c5fdde93 100644 --- a/arch/powerpc/platforms/Makefile +++ b/arch/powerpc/platforms/Makefile @@ -8,6 +8,7 @@ endif obj-$(CONFIG_PPC_EFIKA) += efika/ obj-$(CONFIG_PPC_CHRP) += chrp/ obj-$(CONFIG_4xx) += 4xx/ +obj-$(CONFIG_PPC_MPC52xx) += 52xx/ obj-$(CONFIG_PPC_83xx) += 83xx/ obj-$(CONFIG_PPC_85xx) += 85xx/ obj-$(CONFIG_PPC_86xx) += 86xx/ diff --git a/arch/powerpc/sysdev/Makefile b/arch/powerpc/sysdev/Makefile index ee7c6d48af7..6cc34597a62 100644 --- a/arch/powerpc/sysdev/Makefile +++ b/arch/powerpc/sysdev/Makefile @@ -16,7 +16,6 @@ obj-$(CONFIG_MTD) += rom.o ifeq ($(CONFIG_PPC_MERGE),y) obj-$(CONFIG_PPC_I8259) += i8259.o obj-$(CONFIG_PPC_83xx) += ipic.o -obj-$(CONFIG_PPC_MPC52xx) += mpc52xx_pic.o endif # Temporary hack until we have migrated to asm-powerpc diff --git a/arch/powerpc/sysdev/mpc52xx_pic.c b/arch/powerpc/sysdev/mpc52xx_pic.c deleted file mode 100644 index 6df51f04b8f..00000000000 --- a/arch/powerpc/sysdev/mpc52xx_pic.c +++ /dev/null @@ -1,538 +0,0 @@ -/* - * - * Programmable Interrupt Controller functions for the Freescale MPC52xx. - * - * Copyright (C) 2006 bplan GmbH - * - * Based on the code from the 2.4 kernel by - * Dale Farnsworth and Kent Borg. - * - * Copyright (C) 2004 Sylvain Munaut - * Copyright (C) 2003 Montavista Software, Inc - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. - * - */ - -#undef DEBUG - -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include -#include - -/* - * -*/ - -static struct mpc52xx_intr __iomem *intr; -static struct mpc52xx_sdma __iomem *sdma; -static struct irq_host *mpc52xx_irqhost = NULL; - -static unsigned char mpc52xx_map_senses[4] = { - IRQ_TYPE_LEVEL_HIGH, - IRQ_TYPE_EDGE_RISING, - IRQ_TYPE_EDGE_FALLING, - IRQ_TYPE_LEVEL_LOW, -}; - -/* - * -*/ - -static inline void io_be_setbit(u32 __iomem * addr, int bitno) -{ - out_be32(addr, in_be32(addr) | (1 << bitno)); -} - -static inline void io_be_clrbit(u32 __iomem * addr, int bitno) -{ - out_be32(addr, in_be32(addr) & ~(1 << bitno)); -} - -/* - * IRQ[0-3] interrupt irq_chip -*/ - -static void mpc52xx_extirq_mask(unsigned int virq) -{ - int irq; - int l2irq; - - irq = irq_map[virq].hwirq; - l2irq = (irq & MPC52xx_IRQ_L2_MASK) >> MPC52xx_IRQ_L2_OFFSET; - - pr_debug("%s: irq=%x. l2=%d\n", __func__, irq, l2irq); - - io_be_clrbit(&intr->ctrl, 11 - l2irq); -} - -static void mpc52xx_extirq_unmask(unsigned int virq) -{ - int irq; - int l2irq; - - irq = irq_map[virq].hwirq; - l2irq = (irq & MPC52xx_IRQ_L2_MASK) >> MPC52xx_IRQ_L2_OFFSET; - - pr_debug("%s: irq=%x. l2=%d\n", __func__, irq, l2irq); - - io_be_setbit(&intr->ctrl, 11 - l2irq); -} - -static void mpc52xx_extirq_ack(unsigned int virq) -{ - int irq; - int l2irq; - - irq = irq_map[virq].hwirq; - l2irq = (irq & MPC52xx_IRQ_L2_MASK) >> MPC52xx_IRQ_L2_OFFSET; - - pr_debug("%s: irq=%x. l2=%d\n", __func__, irq, l2irq); - - io_be_setbit(&intr->ctrl, 27 - l2irq); -} - -static struct irq_chip mpc52xx_extirq_irqchip = { - .typename = " MPC52xx IRQ[0-3] ", - .mask = mpc52xx_extirq_mask, - .unmask = mpc52xx_extirq_unmask, - .ack = mpc52xx_extirq_ack, -}; - -/* - * Main interrupt irq_chip -*/ - -static void mpc52xx_main_mask(unsigned int virq) -{ - int irq; - int l2irq; - - irq = irq_map[virq].hwirq; - l2irq = (irq & MPC52xx_IRQ_L2_MASK) >> MPC52xx_IRQ_L2_OFFSET; - - pr_debug("%s: irq=%x. l2=%d\n", __func__, irq, l2irq); - - io_be_setbit(&intr->main_mask, 15 - l2irq); -} - -static void mpc52xx_main_unmask(unsigned int virq) -{ - int irq; - int l2irq; - - irq = irq_map[virq].hwirq; - l2irq = (irq & MPC52xx_IRQ_L2_MASK) >> MPC52xx_IRQ_L2_OFFSET; - - pr_debug("%s: irq=%x. l2=%d\n", __func__, irq, l2irq); - - io_be_clrbit(&intr->main_mask, 15 - l2irq); -} - -static struct irq_chip mpc52xx_main_irqchip = { - .typename = "MPC52xx Main", - .mask = mpc52xx_main_mask, - .mask_ack = mpc52xx_main_mask, - .unmask = mpc52xx_main_unmask, -}; - -/* - * Peripherals interrupt irq_chip -*/ - -static void mpc52xx_periph_mask(unsigned int virq) -{ - int irq; - int l2irq; - - irq = irq_map[virq].hwirq; - l2irq = (irq & MPC52xx_IRQ_L2_MASK) >> MPC52xx_IRQ_L2_OFFSET; - - pr_debug("%s: irq=%x. l2=%d\n", __func__, irq, l2irq); - - io_be_setbit(&intr->per_mask, 31 - l2irq); -} - -static void mpc52xx_periph_unmask(unsigned int virq) -{ - int irq; - int l2irq; - - irq = irq_map[virq].hwirq; - l2irq = (irq & MPC52xx_IRQ_L2_MASK) >> MPC52xx_IRQ_L2_OFFSET; - - pr_debug("%s: irq=%x. l2=%d\n", __func__, irq, l2irq); - - io_be_clrbit(&intr->per_mask, 31 - l2irq); -} - -static struct irq_chip mpc52xx_periph_irqchip = { - .typename = "MPC52xx Peripherals", - .mask = mpc52xx_periph_mask, - .mask_ack = mpc52xx_periph_mask, - .unmask = mpc52xx_periph_unmask, -}; - -/* - * SDMA interrupt irq_chip -*/ - -static void mpc52xx_sdma_mask(unsigned int virq) -{ - int irq; - int l2irq; - - irq = irq_map[virq].hwirq; - l2irq = (irq & MPC52xx_IRQ_L2_MASK) >> MPC52xx_IRQ_L2_OFFSET; - - pr_debug("%s: irq=%x. l2=%d\n", __func__, irq, l2irq); - - io_be_setbit(&sdma->IntMask, l2irq); -} - -static void mpc52xx_sdma_unmask(unsigned int virq) -{ - int irq; - int l2irq; - - irq = irq_map[virq].hwirq; - l2irq = (irq & MPC52xx_IRQ_L2_MASK) >> MPC52xx_IRQ_L2_OFFSET; - - pr_debug("%s: irq=%x. l2=%d\n", __func__, irq, l2irq); - - io_be_clrbit(&sdma->IntMask, l2irq); -} - -static void mpc52xx_sdma_ack(unsigned int virq) -{ - int irq; - int l2irq; - - irq = irq_map[virq].hwirq; - l2irq = (irq & MPC52xx_IRQ_L2_MASK) >> MPC52xx_IRQ_L2_OFFSET; - - pr_debug("%s: irq=%x. l2=%d\n", __func__, irq, l2irq); - - out_be32(&sdma->IntPend, 1 << l2irq); -} - -static struct irq_chip mpc52xx_sdma_irqchip = { - .typename = "MPC52xx SDMA", - .mask = mpc52xx_sdma_mask, - .unmask = mpc52xx_sdma_unmask, - .ack = mpc52xx_sdma_ack, -}; - -/* - * irq_host -*/ - -static int mpc52xx_irqhost_match(struct irq_host *h, struct device_node *node) -{ - pr_debug("%s: node=%p\n", __func__, node); - return mpc52xx_irqhost->host_data == node; -} - -static int mpc52xx_irqhost_xlate(struct irq_host *h, struct device_node *ct, - u32 * intspec, unsigned int intsize, - irq_hw_number_t * out_hwirq, - unsigned int *out_flags) -{ - int intrvect_l1; - int intrvect_l2; - int intrvect_type; - int intrvect_linux; - - if (intsize != 3) - return -1; - - intrvect_l1 = (int)intspec[0]; - intrvect_l2 = (int)intspec[1]; - intrvect_type = (int)intspec[2]; - - intrvect_linux = - (intrvect_l1 << MPC52xx_IRQ_L1_OFFSET) & MPC52xx_IRQ_L1_MASK; - intrvect_linux |= - (intrvect_l2 << MPC52xx_IRQ_L2_OFFSET) & MPC52xx_IRQ_L2_MASK; - - pr_debug("return %x, l1=%d, l2=%d\n", intrvect_linux, intrvect_l1, - intrvect_l2); - - *out_hwirq = intrvect_linux; - *out_flags = mpc52xx_map_senses[intrvect_type]; - - return 0; -} - -/* - * this function retrieves the correct IRQ type out - * of the MPC regs - * Only externals IRQs needs this -*/ -static int mpc52xx_irqx_gettype(int irq) -{ - int type; - u32 ctrl_reg; - - ctrl_reg = in_be32(&intr->ctrl); - type = (ctrl_reg >> (22 - irq * 2)) & 0x3; - - return mpc52xx_map_senses[type]; -} - -static int mpc52xx_irqhost_map(struct irq_host *h, unsigned int virq, - irq_hw_number_t irq) -{ - int l1irq; - int l2irq; - struct irq_chip *good_irqchip; - void *good_handle; - int type; - - l1irq = (irq & MPC52xx_IRQ_L1_MASK) >> MPC52xx_IRQ_L1_OFFSET; - l2irq = (irq & MPC52xx_IRQ_L2_MASK) >> MPC52xx_IRQ_L2_OFFSET; - - /* - * Most of ours IRQs will be level low - * Only external IRQs on some platform may be others - */ - type = IRQ_TYPE_LEVEL_LOW; - - switch (l1irq) { - case MPC52xx_IRQ_L1_CRIT: - pr_debug("%s: Critical. l2=%x\n", __func__, l2irq); - - BUG_ON(l2irq != 0); - - type = mpc52xx_irqx_gettype(l2irq); - good_irqchip = &mpc52xx_extirq_irqchip; - break; - - case MPC52xx_IRQ_L1_MAIN: - pr_debug("%s: Main IRQ[1-3] l2=%x\n", __func__, l2irq); - - if ((l2irq >= 1) && (l2irq <= 3)) { - type = mpc52xx_irqx_gettype(l2irq); - good_irqchip = &mpc52xx_extirq_irqchip; - } else { - good_irqchip = &mpc52xx_main_irqchip; - } - break; - - case MPC52xx_IRQ_L1_PERP: - pr_debug("%s: Peripherals. l2=%x\n", __func__, l2irq); - good_irqchip = &mpc52xx_periph_irqchip; - break; - - case MPC52xx_IRQ_L1_SDMA: - pr_debug("%s: SDMA. l2=%x\n", __func__, l2irq); - good_irqchip = &mpc52xx_sdma_irqchip; - break; - - default: - pr_debug("%s: Error, unknown L1 IRQ (0x%x)\n", __func__, l1irq); - printk(KERN_ERR "Unknow IRQ!\n"); - return -EINVAL; - } - - switch (type) { - case IRQ_TYPE_EDGE_FALLING: - case IRQ_TYPE_EDGE_RISING: - good_handle = handle_edge_irq; - break; - default: - good_handle = handle_level_irq; - } - - set_irq_chip_and_handler(virq, good_irqchip, good_handle); - - pr_debug("%s: virq=%x, hw=%x. type=%x\n", __func__, virq, - (int)irq, type); - - return 0; -} - -static struct irq_host_ops mpc52xx_irqhost_ops = { - .match = mpc52xx_irqhost_match, - .xlate = mpc52xx_irqhost_xlate, - .map = mpc52xx_irqhost_map, -}; - -/* - * init (public) -*/ - -void __init mpc52xx_init_irq(void) -{ - struct device_node *picnode = NULL; - int picnode_regsize; - u32 picnode_regoffset; - - struct device_node *sdmanode = NULL; - int sdmanode_regsize; - u32 sdmanode_regoffset; - - u64 size64; - int flags; - - u32 intr_ctrl; - - picnode = of_find_compatible_node(NULL, "interrupt-controller", - "mpc5200-pic"); - if (picnode == NULL) { - printk(KERN_ERR "MPC52xx PIC: " - "Unable to find the interrupt controller " - "in the OpenFirmware device tree\n"); - goto end; - } - - sdmanode = of_find_compatible_node(NULL, "dma-controller", - "mpc5200-bestcomm"); - if (sdmanode == NULL) { - printk(KERN_ERR "MPC52xx PIC" - "Unable to find the Bestcomm DMA controller device " - "in the OpenFirmware device tree\n"); - goto end; - } - - /* Retrieve PIC ressources */ - picnode_regoffset = (u32) of_get_address(picnode, 0, &size64, &flags); - if (picnode_regoffset == 0) { - printk(KERN_ERR "MPC52xx PIC" - "Unable to get the interrupt controller address\n"); - goto end; - } - - picnode_regoffset = - of_translate_address(picnode, (u32 *) picnode_regoffset); - picnode_regsize = (int)size64; - - /* Retrieve SDMA ressources */ - sdmanode_regoffset = (u32) of_get_address(sdmanode, 0, &size64, &flags); - if (sdmanode_regoffset == 0) { - printk(KERN_ERR "MPC52xx PIC: " - "Unable to get the Bestcomm DMA controller address\n"); - goto end; - } - - sdmanode_regoffset = - of_translate_address(sdmanode, (u32 *) sdmanode_regoffset); - sdmanode_regsize = (int)size64; - - /* Remap the necessary zones */ - intr = ioremap(picnode_regoffset, picnode_regsize); - if (intr == NULL) { - printk(KERN_ERR "MPC52xx PIC: " - "Unable to ioremap interrupt controller registers!\n"); - goto end; - } - - sdma = ioremap(sdmanode_regoffset, sdmanode_regsize); - if (sdma == NULL) { - iounmap(intr); - printk(KERN_ERR "MPC52xx PIC: " - "Unable to ioremap Bestcomm DMA registers!\n"); - goto end; - } - - printk(KERN_INFO "MPC52xx PIC: MPC52xx PIC Remapped at 0x%8.8x\n", - picnode_regoffset); - printk(KERN_INFO "MPC52xx PIC: MPC52xx SDMA Remapped at 0x%8.8x\n", - sdmanode_regoffset); - - /* Disable all interrupt sources. */ - out_be32(&sdma->IntPend, 0xffffffff); /* 1 means clear pending */ - out_be32(&sdma->IntMask, 0xffffffff); /* 1 means disabled */ - out_be32(&intr->per_mask, 0x7ffffc00); /* 1 means disabled */ - out_be32(&intr->main_mask, 0x00010fff); /* 1 means disabled */ - intr_ctrl = in_be32(&intr->ctrl); - intr_ctrl &= 0x00ff0000; /* Keeps IRQ[0-3] config */ - intr_ctrl |= 0x0f000000 | /* clear IRQ 0-3 */ - 0x00001000 | /* MEE master external enable */ - 0x00000000 | /* 0 means disable IRQ 0-3 */ - 0x00000001; /* CEb route critical normally */ - out_be32(&intr->ctrl, intr_ctrl); - - /* Zero a bunch of the priority settings. */ - out_be32(&intr->per_pri1, 0); - out_be32(&intr->per_pri2, 0); - out_be32(&intr->per_pri3, 0); - out_be32(&intr->main_pri1, 0); - out_be32(&intr->main_pri2, 0); - - /* - * As last step, add an irq host to translate the real - * hw irq information provided by the ofw to linux virq - */ - - mpc52xx_irqhost = - irq_alloc_host(IRQ_HOST_MAP_LINEAR, MPC52xx_IRQ_HIGHTESTHWIRQ, - &mpc52xx_irqhost_ops, -1); - - if (mpc52xx_irqhost) { - mpc52xx_irqhost->host_data = picnode; - printk(KERN_INFO "MPC52xx PIC is up and running!\n"); - } else { - printk(KERN_ERR - "MPC52xx PIC: Unable to allocate the IRQ host\n"); - } - -end: - of_node_put(picnode); - of_node_put(sdmanode); -} - -/* - * get_irq (public) -*/ -unsigned int mpc52xx_get_irq(void) -{ - u32 status; - int irq = NO_IRQ_IGNORE; - - status = in_be32(&intr->enc_status); - if (status & 0x00000400) { /* critical */ - irq = (status >> 8) & 0x3; - if (irq == 2) /* high priority peripheral */ - goto peripheral; - irq |= (MPC52xx_IRQ_L1_CRIT << MPC52xx_IRQ_L1_OFFSET) & - MPC52xx_IRQ_L1_MASK; - } else if (status & 0x00200000) { /* main */ - irq = (status >> 16) & 0x1f; - if (irq == 4) /* low priority peripheral */ - goto peripheral; - irq |= (MPC52xx_IRQ_L1_MAIN << MPC52xx_IRQ_L1_OFFSET) & - MPC52xx_IRQ_L1_MASK; - } else if (status & 0x20000000) { /* peripheral */ - peripheral: - irq = (status >> 24) & 0x1f; - if (irq == 0) { /* bestcomm */ - status = in_be32(&sdma->IntPend); - irq = ffs(status) - 1; - irq |= (MPC52xx_IRQ_L1_SDMA << MPC52xx_IRQ_L1_OFFSET) & - MPC52xx_IRQ_L1_MASK; - } else - irq |= (MPC52xx_IRQ_L1_PERP << MPC52xx_IRQ_L1_OFFSET) & - MPC52xx_IRQ_L1_MASK; - } - - pr_debug("%s: irq=%x. virq=%d\n", __func__, irq, - irq_linear_revmap(mpc52xx_irqhost, irq)); - - return irq_linear_revmap(mpc52xx_irqhost, irq); -} - -- cgit v1.2.3-70-g09d2 From d4150248fc769c7a69c61cb9d95dfac14950d8cf Mon Sep 17 00:00:00 2001 From: Grant Likely Date: Mon, 27 Nov 2006 14:16:24 -0700 Subject: [POWERPC] Put mpc52xx support file in platforms/52xx platforms/embedded6xx is probably going away, and 52xx boards need some extra support the 52xx interrupt controller and DMA engine anyway. It makes sense to group all the 52xx bits into a single path. Signed-off-by: Grant Likely Signed-off-by: Sylvain Munaut Signed-off-by: Paul Mackerras --- arch/powerpc/Kconfig | 4 ++++ arch/powerpc/platforms/embedded6xx/Kconfig | 12 ------------ 2 files changed, 4 insertions(+), 12 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index 836caf1e943..a6bc221ad1b 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -410,6 +410,10 @@ config PPC_CHRP select PPC_NATIVE default y +config PPC_MPC52xx + bool + default n + config PPC_EFIKA bool "bPlan Efika 5k2. MPC5200B based computer" depends on PPC_MULTIPLATFORM && PPC32 diff --git a/arch/powerpc/platforms/embedded6xx/Kconfig b/arch/powerpc/platforms/embedded6xx/Kconfig index 234a861870a..910d50a8333 100644 --- a/arch/powerpc/platforms/embedded6xx/Kconfig +++ b/arch/powerpc/platforms/embedded6xx/Kconfig @@ -146,15 +146,6 @@ config PQ2FADS Select PQ2FADS if you wish to configure for a Freescale PQ2FADS board (-VR or -ZU). -config LITE5200 - bool "Freescale LITE5200 / (IceCube)" - select PPC_MPC52xx - help - Support for the LITE5200 dev board for the MPC5200 from Freescale. - This is for the LITE5200 version 2.0 board. Don't know if it changes - much but it's only been tested on this board version. I think this - board is also known as IceCube. - config EV64360 bool "Marvell-EV64360BP" help @@ -172,9 +163,6 @@ config TQM8xxL depends on 8xx && (TQM823L || TQM850L || FPS850L || TQM855L || TQM860L) default y -config PPC_MPC52xx - bool - config 8260 bool "CPM2 Support" if WILLOW depends on 6xx -- cgit v1.2.3-70-g09d2 From b9cf5d8e2edc503977be090eff45ef81555dcb1d Mon Sep 17 00:00:00 2001 From: Grant Likely Date: Mon, 27 Nov 2006 14:16:25 -0700 Subject: [POWERPC] Move Efika support files into platforms/52xx The Efika board isn't different enough from other 52xx based boards to justify a separate platform. This patch merges it with the support code for all other 52xx based boards. Signed-off-by: Grant Likely Acked-by: Sylvain Munaut Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/52xx/Makefile | 2 + arch/powerpc/platforms/52xx/efika-pci.c | 119 ++++++++++++++++++++++++ arch/powerpc/platforms/52xx/efika-setup.c | 150 ++++++++++++++++++++++++++++++ arch/powerpc/platforms/52xx/efika.h | 19 ++++ arch/powerpc/platforms/Makefile | 1 - arch/powerpc/platforms/efika/Makefile | 1 - arch/powerpc/platforms/efika/efika.h | 19 ---- arch/powerpc/platforms/efika/pci.c | 119 ------------------------ arch/powerpc/platforms/efika/setup.c | 150 ------------------------------ 9 files changed, 290 insertions(+), 290 deletions(-) create mode 100644 arch/powerpc/platforms/52xx/efika-pci.c create mode 100644 arch/powerpc/platforms/52xx/efika-setup.c create mode 100644 arch/powerpc/platforms/52xx/efika.h delete mode 100644 arch/powerpc/platforms/efika/Makefile delete mode 100644 arch/powerpc/platforms/efika/efika.h delete mode 100644 arch/powerpc/platforms/efika/pci.c delete mode 100644 arch/powerpc/platforms/efika/setup.c (limited to 'arch/powerpc') diff --git a/arch/powerpc/platforms/52xx/Makefile b/arch/powerpc/platforms/52xx/Makefile index e1b02f1a189..1c9c122123d 100644 --- a/arch/powerpc/platforms/52xx/Makefile +++ b/arch/powerpc/platforms/52xx/Makefile @@ -4,3 +4,5 @@ ifeq ($(CONFIG_PPC_MERGE),y) obj-y += mpc52xx_pic.o endif + +obj-$(CONFIG_PPC_EFIKA) += efika-setup.o efika-pci.o diff --git a/arch/powerpc/platforms/52xx/efika-pci.c b/arch/powerpc/platforms/52xx/efika-pci.c new file mode 100644 index 00000000000..62e05b2a922 --- /dev/null +++ b/arch/powerpc/platforms/52xx/efika-pci.c @@ -0,0 +1,119 @@ + +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include + +#include "efika.h" + +#ifdef CONFIG_PCI +/* + * Access functions for PCI config space using RTAS calls. + */ +static int rtas_read_config(struct pci_bus *bus, unsigned int devfn, int offset, + int len, u32 * val) +{ + struct pci_controller *hose = bus->sysdata; + unsigned long addr = (offset & 0xff) | ((devfn & 0xff) << 8) + | (((bus->number - hose->first_busno) & 0xff) << 16) + | (hose->index << 24); + int ret = -1; + int rval; + + rval = rtas_call(rtas_token("read-pci-config"), 2, 2, &ret, addr, len); + *val = ret; + return rval ? PCIBIOS_DEVICE_NOT_FOUND : PCIBIOS_SUCCESSFUL; +} + +static int rtas_write_config(struct pci_bus *bus, unsigned int devfn, + int offset, int len, u32 val) +{ + struct pci_controller *hose = bus->sysdata; + unsigned long addr = (offset & 0xff) | ((devfn & 0xff) << 8) + | (((bus->number - hose->first_busno) & 0xff) << 16) + | (hose->index << 24); + int rval; + + rval = rtas_call(rtas_token("write-pci-config"), 3, 1, NULL, + addr, len, val); + return rval ? PCIBIOS_DEVICE_NOT_FOUND : PCIBIOS_SUCCESSFUL; +} + +static struct pci_ops rtas_pci_ops = { + rtas_read_config, + rtas_write_config +}; + +void __init efika_pcisetup(void) +{ + const int *bus_range; + int len; + struct pci_controller *hose; + struct device_node *root; + struct device_node *pcictrl; + + root = of_find_node_by_path("/"); + if (root == NULL) { + printk(KERN_WARNING EFIKA_PLATFORM_NAME + ": Unable to find the root node\n"); + return; + } + + for (pcictrl = NULL;;) { + pcictrl = of_get_next_child(root, pcictrl); + if ((pcictrl == NULL) || (strcmp(pcictrl->name, "pci") == 0)) + break; + } + + of_node_put(root); + + if (pcictrl == NULL) { + printk(KERN_WARNING EFIKA_PLATFORM_NAME + ": Unable to find the PCI bridge node\n"); + return; + } + + bus_range = get_property(pcictrl, "bus-range", &len); + if (bus_range == NULL || len < 2 * sizeof(int)) { + printk(KERN_WARNING EFIKA_PLATFORM_NAME + ": Can't get bus-range for %s\n", pcictrl->full_name); + return; + } + + if (bus_range[1] == bus_range[0]) + printk(KERN_INFO EFIKA_PLATFORM_NAME ": PCI bus %d", + bus_range[0]); + else + printk(KERN_INFO EFIKA_PLATFORM_NAME ": PCI buses %d..%d", + bus_range[0], bus_range[1]); + printk(" controlled by %s\n", pcictrl->full_name); + printk("\n"); + + hose = pcibios_alloc_controller(); + if (!hose) { + printk(KERN_WARNING EFIKA_PLATFORM_NAME + ": Can't allocate PCI controller structure for %s\n", + pcictrl->full_name); + return; + } + + hose->arch_data = of_node_get(pcictrl); + hose->first_busno = bus_range[0]; + hose->last_busno = bus_range[1]; + hose->ops = &rtas_pci_ops; + + pci_process_bridge_OF_ranges(hose, pcictrl, 0); +} + +#else +void __init efika_pcisetup(void) +{} +#endif diff --git a/arch/powerpc/platforms/52xx/efika-setup.c b/arch/powerpc/platforms/52xx/efika-setup.c new file mode 100644 index 00000000000..110c980ed1e --- /dev/null +++ b/arch/powerpc/platforms/52xx/efika-setup.c @@ -0,0 +1,150 @@ +/* + * + * Efika 5K2 platform setup + * Some code really inspired from the lite5200b platform. + * + * Copyright (C) 2006 bplan GmbH + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include + +#include "efika.h" + +static void efika_show_cpuinfo(struct seq_file *m) +{ + struct device_node *root; + const char *revision = NULL; + const char *codegendescription = NULL; + const char *codegenvendor = NULL; + + root = of_find_node_by_path("/"); + if (root) { + revision = get_property(root, "revision", NULL); + codegendescription = + get_property(root, "CODEGEN,description", NULL); + codegenvendor = get_property(root, "CODEGEN,vendor", NULL); + + of_node_put(root); + } + + if (codegendescription) + seq_printf(m, "machine\t\t: %s\n", codegendescription); + else + seq_printf(m, "machine\t\t: Efika\n"); + + if (revision) + seq_printf(m, "revision\t: %s\n", revision); + + if (codegenvendor) + seq_printf(m, "vendor\t\t: %s\n", codegenvendor); + + of_node_put(root); +} + +static void __init efika_setup_arch(void) +{ + rtas_initialize(); + +#ifdef CONFIG_BLK_DEV_INITRD + initrd_below_start_ok = 1; + + if (initrd_start) + ROOT_DEV = Root_RAM0; + else +#endif + ROOT_DEV = Root_SDA2; /* sda2 (sda1 is for the kernel) */ + + efika_pcisetup(); + + if (ppc_md.progress) + ppc_md.progress("Linux/PPC " UTS_RELEASE " runnung on Efika ;-)\n", 0x0); +} + +static void __init efika_init(void) +{ + struct device_node *np; + struct device_node *cnp = NULL; + const u32 *base; + + /* Find every child of the SOC node and add it to of_platform */ + np = of_find_node_by_name(NULL, "builtin"); + if (np) { + char name[BUS_ID_SIZE]; + while ((cnp = of_get_next_child(np, cnp))) { + strcpy(name, cnp->name); + + base = get_property(cnp, "reg", NULL); + if (base == NULL) + continue; + + snprintf(name+strlen(name), BUS_ID_SIZE, "@%x", *base); + of_platform_device_create(cnp, name, NULL); + + printk(KERN_INFO EFIKA_PLATFORM_NAME" : Added %s (type '%s' at '%s') to the known devices\n", name, cnp->type, cnp->full_name); + } + } + + if (ppc_md.progress) + ppc_md.progress(" Have fun with your Efika! ", 0x7777); +} + +static int __init efika_probe(void) +{ + char *model = of_get_flat_dt_prop(of_get_flat_dt_root(), + "model", NULL); + + if (model == NULL) + return 0; + if (strcmp(model, "EFIKA5K2")) + return 0; + + ISA_DMA_THRESHOLD = ~0L; + DMA_MODE_READ = 0x44; + DMA_MODE_WRITE = 0x48; + + return 1; +} + +define_machine(efika) +{ + .name = EFIKA_PLATFORM_NAME, + .probe = efika_probe, + .setup_arch = efika_setup_arch, + .init = efika_init, + .show_cpuinfo = efika_show_cpuinfo, + .init_IRQ = mpc52xx_init_irq, + .get_irq = mpc52xx_get_irq, + .restart = rtas_restart, + .power_off = rtas_power_off, + .halt = rtas_halt, + .set_rtc_time = rtas_set_rtc_time, + .get_rtc_time = rtas_get_rtc_time, + .progress = rtas_progress, + .get_boot_time = rtas_get_boot_time, + .calibrate_decr = generic_calibrate_decr, + .phys_mem_access_prot = pci_phys_mem_access_prot, +}; diff --git a/arch/powerpc/platforms/52xx/efika.h b/arch/powerpc/platforms/52xx/efika.h new file mode 100644 index 00000000000..2f060fd097d --- /dev/null +++ b/arch/powerpc/platforms/52xx/efika.h @@ -0,0 +1,19 @@ +/* + * Efika 5K2 platform setup - Header file + * + * Copyright (C) 2006 bplan GmbH + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + * + */ + +#ifndef __ARCH_POWERPC_EFIKA__ +#define __ARCH_POWERPC_EFIKA__ + +#define EFIKA_PLATFORM_NAME "Efika" + +extern void __init efika_pcisetup(void); + +#endif diff --git a/arch/powerpc/platforms/Makefile b/arch/powerpc/platforms/Makefile index 468c5fdde93..44d95eaf22e 100644 --- a/arch/powerpc/platforms/Makefile +++ b/arch/powerpc/platforms/Makefile @@ -5,7 +5,6 @@ ifeq ($(CONFIG_PPC64),y) obj-$(CONFIG_PPC_PMAC) += powermac/ endif endif -obj-$(CONFIG_PPC_EFIKA) += efika/ obj-$(CONFIG_PPC_CHRP) += chrp/ obj-$(CONFIG_4xx) += 4xx/ obj-$(CONFIG_PPC_MPC52xx) += 52xx/ diff --git a/arch/powerpc/platforms/efika/Makefile b/arch/powerpc/platforms/efika/Makefile deleted file mode 100644 index 56d44044023..00000000000 --- a/arch/powerpc/platforms/efika/Makefile +++ /dev/null @@ -1 +0,0 @@ -obj-y += setup.o pci.o diff --git a/arch/powerpc/platforms/efika/efika.h b/arch/powerpc/platforms/efika/efika.h deleted file mode 100644 index 2f060fd097d..00000000000 --- a/arch/powerpc/platforms/efika/efika.h +++ /dev/null @@ -1,19 +0,0 @@ -/* - * Efika 5K2 platform setup - Header file - * - * Copyright (C) 2006 bplan GmbH - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. - * - */ - -#ifndef __ARCH_POWERPC_EFIKA__ -#define __ARCH_POWERPC_EFIKA__ - -#define EFIKA_PLATFORM_NAME "Efika" - -extern void __init efika_pcisetup(void); - -#endif diff --git a/arch/powerpc/platforms/efika/pci.c b/arch/powerpc/platforms/efika/pci.c deleted file mode 100644 index 62e05b2a922..00000000000 --- a/arch/powerpc/platforms/efika/pci.c +++ /dev/null @@ -1,119 +0,0 @@ - -#include -#include -#include -#include - -#include -#include -#include -#include -#include -#include -#include - -#include "efika.h" - -#ifdef CONFIG_PCI -/* - * Access functions for PCI config space using RTAS calls. - */ -static int rtas_read_config(struct pci_bus *bus, unsigned int devfn, int offset, - int len, u32 * val) -{ - struct pci_controller *hose = bus->sysdata; - unsigned long addr = (offset & 0xff) | ((devfn & 0xff) << 8) - | (((bus->number - hose->first_busno) & 0xff) << 16) - | (hose->index << 24); - int ret = -1; - int rval; - - rval = rtas_call(rtas_token("read-pci-config"), 2, 2, &ret, addr, len); - *val = ret; - return rval ? PCIBIOS_DEVICE_NOT_FOUND : PCIBIOS_SUCCESSFUL; -} - -static int rtas_write_config(struct pci_bus *bus, unsigned int devfn, - int offset, int len, u32 val) -{ - struct pci_controller *hose = bus->sysdata; - unsigned long addr = (offset & 0xff) | ((devfn & 0xff) << 8) - | (((bus->number - hose->first_busno) & 0xff) << 16) - | (hose->index << 24); - int rval; - - rval = rtas_call(rtas_token("write-pci-config"), 3, 1, NULL, - addr, len, val); - return rval ? PCIBIOS_DEVICE_NOT_FOUND : PCIBIOS_SUCCESSFUL; -} - -static struct pci_ops rtas_pci_ops = { - rtas_read_config, - rtas_write_config -}; - -void __init efika_pcisetup(void) -{ - const int *bus_range; - int len; - struct pci_controller *hose; - struct device_node *root; - struct device_node *pcictrl; - - root = of_find_node_by_path("/"); - if (root == NULL) { - printk(KERN_WARNING EFIKA_PLATFORM_NAME - ": Unable to find the root node\n"); - return; - } - - for (pcictrl = NULL;;) { - pcictrl = of_get_next_child(root, pcictrl); - if ((pcictrl == NULL) || (strcmp(pcictrl->name, "pci") == 0)) - break; - } - - of_node_put(root); - - if (pcictrl == NULL) { - printk(KERN_WARNING EFIKA_PLATFORM_NAME - ": Unable to find the PCI bridge node\n"); - return; - } - - bus_range = get_property(pcictrl, "bus-range", &len); - if (bus_range == NULL || len < 2 * sizeof(int)) { - printk(KERN_WARNING EFIKA_PLATFORM_NAME - ": Can't get bus-range for %s\n", pcictrl->full_name); - return; - } - - if (bus_range[1] == bus_range[0]) - printk(KERN_INFO EFIKA_PLATFORM_NAME ": PCI bus %d", - bus_range[0]); - else - printk(KERN_INFO EFIKA_PLATFORM_NAME ": PCI buses %d..%d", - bus_range[0], bus_range[1]); - printk(" controlled by %s\n", pcictrl->full_name); - printk("\n"); - - hose = pcibios_alloc_controller(); - if (!hose) { - printk(KERN_WARNING EFIKA_PLATFORM_NAME - ": Can't allocate PCI controller structure for %s\n", - pcictrl->full_name); - return; - } - - hose->arch_data = of_node_get(pcictrl); - hose->first_busno = bus_range[0]; - hose->last_busno = bus_range[1]; - hose->ops = &rtas_pci_ops; - - pci_process_bridge_OF_ranges(hose, pcictrl, 0); -} - -#else -void __init efika_pcisetup(void) -{} -#endif diff --git a/arch/powerpc/platforms/efika/setup.c b/arch/powerpc/platforms/efika/setup.c deleted file mode 100644 index 110c980ed1e..00000000000 --- a/arch/powerpc/platforms/efika/setup.c +++ /dev/null @@ -1,150 +0,0 @@ -/* - * - * Efika 5K2 platform setup - * Some code really inspired from the lite5200b platform. - * - * Copyright (C) 2006 bplan GmbH - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. - * - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include -#include -#include -#include - -#include "efika.h" - -static void efika_show_cpuinfo(struct seq_file *m) -{ - struct device_node *root; - const char *revision = NULL; - const char *codegendescription = NULL; - const char *codegenvendor = NULL; - - root = of_find_node_by_path("/"); - if (root) { - revision = get_property(root, "revision", NULL); - codegendescription = - get_property(root, "CODEGEN,description", NULL); - codegenvendor = get_property(root, "CODEGEN,vendor", NULL); - - of_node_put(root); - } - - if (codegendescription) - seq_printf(m, "machine\t\t: %s\n", codegendescription); - else - seq_printf(m, "machine\t\t: Efika\n"); - - if (revision) - seq_printf(m, "revision\t: %s\n", revision); - - if (codegenvendor) - seq_printf(m, "vendor\t\t: %s\n", codegenvendor); - - of_node_put(root); -} - -static void __init efika_setup_arch(void) -{ - rtas_initialize(); - -#ifdef CONFIG_BLK_DEV_INITRD - initrd_below_start_ok = 1; - - if (initrd_start) - ROOT_DEV = Root_RAM0; - else -#endif - ROOT_DEV = Root_SDA2; /* sda2 (sda1 is for the kernel) */ - - efika_pcisetup(); - - if (ppc_md.progress) - ppc_md.progress("Linux/PPC " UTS_RELEASE " runnung on Efika ;-)\n", 0x0); -} - -static void __init efika_init(void) -{ - struct device_node *np; - struct device_node *cnp = NULL; - const u32 *base; - - /* Find every child of the SOC node and add it to of_platform */ - np = of_find_node_by_name(NULL, "builtin"); - if (np) { - char name[BUS_ID_SIZE]; - while ((cnp = of_get_next_child(np, cnp))) { - strcpy(name, cnp->name); - - base = get_property(cnp, "reg", NULL); - if (base == NULL) - continue; - - snprintf(name+strlen(name), BUS_ID_SIZE, "@%x", *base); - of_platform_device_create(cnp, name, NULL); - - printk(KERN_INFO EFIKA_PLATFORM_NAME" : Added %s (type '%s' at '%s') to the known devices\n", name, cnp->type, cnp->full_name); - } - } - - if (ppc_md.progress) - ppc_md.progress(" Have fun with your Efika! ", 0x7777); -} - -static int __init efika_probe(void) -{ - char *model = of_get_flat_dt_prop(of_get_flat_dt_root(), - "model", NULL); - - if (model == NULL) - return 0; - if (strcmp(model, "EFIKA5K2")) - return 0; - - ISA_DMA_THRESHOLD = ~0L; - DMA_MODE_READ = 0x44; - DMA_MODE_WRITE = 0x48; - - return 1; -} - -define_machine(efika) -{ - .name = EFIKA_PLATFORM_NAME, - .probe = efika_probe, - .setup_arch = efika_setup_arch, - .init = efika_init, - .show_cpuinfo = efika_show_cpuinfo, - .init_IRQ = mpc52xx_init_irq, - .get_irq = mpc52xx_get_irq, - .restart = rtas_restart, - .power_off = rtas_power_off, - .halt = rtas_halt, - .set_rtc_time = rtas_set_rtc_time, - .get_rtc_time = rtas_get_rtc_time, - .progress = rtas_progress, - .get_boot_time = rtas_get_boot_time, - .calibrate_decr = generic_calibrate_decr, - .phys_mem_access_prot = pci_phys_mem_access_prot, -}; -- cgit v1.2.3-70-g09d2 From e65fdfd6ca447353ad1b4c0a0d20df55f3f6f233 Mon Sep 17 00:00:00 2001 From: Sylvain Munaut Date: Mon, 27 Nov 2006 14:16:26 -0700 Subject: [POWERPC] Separate IRQ config / register set from main header There is no need to expose these settings outside the scope of the interrupt controller code itself. Signed-off-by: Sylvain Munaut Signed-off-by: Grant Likely Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/52xx/mpc52xx_pic.c | 1 + arch/powerpc/platforms/52xx/mpc52xx_pic.h | 53 +++++++++++++++++++++++++++++++ include/asm-powerpc/mpc52xx.h | 37 --------------------- 3 files changed, 54 insertions(+), 37 deletions(-) create mode 100644 arch/powerpc/platforms/52xx/mpc52xx_pic.h (limited to 'arch/powerpc') diff --git a/arch/powerpc/platforms/52xx/mpc52xx_pic.c b/arch/powerpc/platforms/52xx/mpc52xx_pic.c index 6df51f04b8f..504154fdf6a 100644 --- a/arch/powerpc/platforms/52xx/mpc52xx_pic.c +++ b/arch/powerpc/platforms/52xx/mpc52xx_pic.c @@ -33,6 +33,7 @@ #include #include #include +#include "mpc52xx_pic.h" /* * diff --git a/arch/powerpc/platforms/52xx/mpc52xx_pic.h b/arch/powerpc/platforms/52xx/mpc52xx_pic.h new file mode 100644 index 00000000000..1a26bcdb304 --- /dev/null +++ b/arch/powerpc/platforms/52xx/mpc52xx_pic.h @@ -0,0 +1,53 @@ +/* + * Header file for Freescale MPC52xx Interrupt controller + * + * Copyright (C) 2004-2005 Sylvain Munaut + * Copyright (C) 2003 MontaVista, Software, Inc. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +#ifndef __POWERPC_SYSDEV_MPC52xx_PIC_H__ +#define __POWERPC_SYSDEV_MPC52xx_PIC_H__ + +#include + + +/* HW IRQ mapping */ +#define MPC52xx_IRQ_L1_CRIT (0) +#define MPC52xx_IRQ_L1_MAIN (1) +#define MPC52xx_IRQ_L1_PERP (2) +#define MPC52xx_IRQ_L1_SDMA (3) + +#define MPC52xx_IRQ_L1_OFFSET (6) +#define MPC52xx_IRQ_L1_MASK (0x00c0) + +#define MPC52xx_IRQ_L2_OFFSET (0) +#define MPC52xx_IRQ_L2_MASK (0x003f) + +#define MPC52xx_IRQ_HIGHTESTHWIRQ (0xd0) + + +/* Interrupt controller Register set */ +struct mpc52xx_intr { + u32 per_mask; /* INTR + 0x00 */ + u32 per_pri1; /* INTR + 0x04 */ + u32 per_pri2; /* INTR + 0x08 */ + u32 per_pri3; /* INTR + 0x0c */ + u32 ctrl; /* INTR + 0x10 */ + u32 main_mask; /* INTR + 0x14 */ + u32 main_pri1; /* INTR + 0x18 */ + u32 main_pri2; /* INTR + 0x1c */ + u32 reserved1; /* INTR + 0x20 */ + u32 enc_status; /* INTR + 0x24 */ + u32 crit_status; /* INTR + 0x28 */ + u32 main_status; /* INTR + 0x2c */ + u32 per_status; /* INTR + 0x30 */ + u32 reserved2; /* INTR + 0x34 */ + u32 per_error; /* INTR + 0x38 */ +}; + +#endif /* __POWERPC_SYSDEV_MPC52xx_PIC_H__ */ + diff --git a/include/asm-powerpc/mpc52xx.h b/include/asm-powerpc/mpc52xx.h index e9aa622f19f..fff752c4bd1 100644 --- a/include/asm-powerpc/mpc52xx.h +++ b/include/asm-powerpc/mpc52xx.h @@ -19,49 +19,12 @@ #endif /* __ASSEMBLY__ */ -/* ======================================================================== */ -/* HW IRQ mapping */ -/* ======================================================================== */ - -#define MPC52xx_IRQ_L1_CRIT (0) -#define MPC52xx_IRQ_L1_MAIN (1) -#define MPC52xx_IRQ_L1_PERP (2) -#define MPC52xx_IRQ_L1_SDMA (3) - -#define MPC52xx_IRQ_L1_OFFSET (6) -#define MPC52xx_IRQ_L1_MASK (0xc0) - -#define MPC52xx_IRQ_L2_OFFSET (0) -#define MPC52xx_IRQ_L2_MASK (0x3f) - -#define MPC52xx_IRQ_HIGHTESTHWIRQ (0xd0) - - /* ======================================================================== */ /* Structures mapping of some unit register set */ /* ======================================================================== */ #ifndef __ASSEMBLY__ -/* Interrupt controller Register set */ -struct mpc52xx_intr { - u32 per_mask; /* INTR + 0x00 */ - u32 per_pri1; /* INTR + 0x04 */ - u32 per_pri2; /* INTR + 0x08 */ - u32 per_pri3; /* INTR + 0x0c */ - u32 ctrl; /* INTR + 0x10 */ - u32 main_mask; /* INTR + 0x14 */ - u32 main_pri1; /* INTR + 0x18 */ - u32 main_pri2; /* INTR + 0x1c */ - u32 reserved1; /* INTR + 0x20 */ - u32 enc_status; /* INTR + 0x24 */ - u32 crit_status; /* INTR + 0x28 */ - u32 main_status; /* INTR + 0x2c */ - u32 per_status; /* INTR + 0x30 */ - u32 reserved2; /* INTR + 0x34 */ - u32 per_error; /* INTR + 0x38 */ -}; - /* Memory Mapping Control */ struct mpc52xx_mmap_ctl { u32 mbar; /* MMAP_CTRL + 0x00 */ -- cgit v1.2.3-70-g09d2 From 6065170cf75c64267f6edec5fd359ce8444bd13d Mon Sep 17 00:00:00 2001 From: Grant Likely Date: Mon, 27 Nov 2006 14:16:27 -0700 Subject: [POWERPC] Add common routines for 52xx support in arch/powerpc Adds utility routines used by 52xx device drivers and board support code. Main functionality is to add device nodes to the of_platform_bus, retrieve the IPB bus frequency, and find+ioremap device registers. Signed-off-by: Grant Likely Signed-off-by: Sylvain Munaut Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/52xx/Makefile | 2 +- arch/powerpc/platforms/52xx/mpc52xx_common.c | 124 +++++++++++++++++++++++++++ arch/powerpc/platforms/52xx/mpc52xx_pic.c | 110 +++++------------------- include/asm-powerpc/mpc52xx.h | 4 + 4 files changed, 151 insertions(+), 89 deletions(-) create mode 100644 arch/powerpc/platforms/52xx/mpc52xx_common.c (limited to 'arch/powerpc') diff --git a/arch/powerpc/platforms/52xx/Makefile b/arch/powerpc/platforms/52xx/Makefile index 1c9c122123d..b8f27a86406 100644 --- a/arch/powerpc/platforms/52xx/Makefile +++ b/arch/powerpc/platforms/52xx/Makefile @@ -2,7 +2,7 @@ # Makefile for 52xx based boards # ifeq ($(CONFIG_PPC_MERGE),y) -obj-y += mpc52xx_pic.o +obj-y += mpc52xx_pic.o mpc52xx_common.o endif obj-$(CONFIG_PPC_EFIKA) += efika-setup.o efika-pci.o diff --git a/arch/powerpc/platforms/52xx/mpc52xx_common.c b/arch/powerpc/platforms/52xx/mpc52xx_common.c new file mode 100644 index 00000000000..05b21444127 --- /dev/null +++ b/arch/powerpc/platforms/52xx/mpc52xx_common.c @@ -0,0 +1,124 @@ +/* + * + * Utility functions for the Freescale MPC52xx. + * + * Copyright (C) 2006 Sylvain Munaut + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + * + */ + +#undef DEBUG + +#include + +#include +#include +#include +#include + + +void __iomem * +mpc52xx_find_and_map(const char *compatible) +{ + struct device_node *ofn; + const u32 *regaddr_p; + u64 regaddr64, size64; + + ofn = of_find_compatible_node(NULL, NULL, compatible); + if (!ofn) + return NULL; + + regaddr_p = of_get_address(ofn, 0, &size64, NULL); + if (!regaddr_p) { + of_node_put(ofn); + return NULL; + } + + regaddr64 = of_translate_address(ofn, regaddr_p); + + of_node_put(ofn); + + return ioremap((u32)regaddr64, (u32)size64); +} + + +/** + * mpc52xx_find_ipb_freq - Find the IPB bus frequency for a device + * @node: device node + * + * Returns IPB bus frequency, or 0 if the bus frequency cannot be found. + */ +unsigned int +mpc52xx_find_ipb_freq(struct device_node *node) +{ + struct device_node *np; + const unsigned int *p_ipb_freq = NULL; + + of_node_get(node); + while (node) { + p_ipb_freq = get_property(node, "bus-frequency", NULL); + if (p_ipb_freq) + break; + + np = of_get_parent(node); + of_node_put(node); + node = np; + } + if (node) + of_node_put(node); + + return p_ipb_freq ? *p_ipb_freq : 0; +} + + +void __init +mpc52xx_setup_cpu(void) +{ + struct mpc52xx_cdm __iomem *cdm; + struct mpc52xx_xlb __iomem *xlb; + + /* Map zones */ + cdm = mpc52xx_find_and_map("mpc52xx-cdm"); + xlb = mpc52xx_find_and_map("mpc52xx-xlb"); + + if (!cdm || !xlb) { + printk(KERN_ERR __FILE__ ": " + "Error while mapping CDM/XLB during mpc52xx_setup_cpu. " + "Expect some abnormal behavior\n"); + goto unmap_regs; + } + + /* Use internal 48 Mhz */ + out_8(&cdm->ext_48mhz_en, 0x00); + out_8(&cdm->fd_enable, 0x01); + if (in_be32(&cdm->rstcfg) & 0x40) /* Assumes 33Mhz clock */ + out_be16(&cdm->fd_counters, 0x0001); + else + out_be16(&cdm->fd_counters, 0x5555); + + /* Configure the XLB Arbiter priorities */ + out_be32(&xlb->master_pri_enable, 0xff); + out_be32(&xlb->master_priority, 0x11111111); + + /* Disable XLB pipelining */ + /* (cfr errate 292. We could do this only just before ATA PIO + transaction and re-enable it afterwards ...) */ + out_be32(&xlb->config, in_be32(&xlb->config) | MPC52xx_XLB_CFG_PLDIS); + + /* Unmap zones */ +unmap_regs: + if (cdm) iounmap(cdm); + if (xlb) iounmap(xlb); +} + +static int __init +mpc52xx_declare_of_platform_devices(void) +{ + /* Find every child of the SOC node and add it to of_platform */ + return of_platform_bus_probe(NULL, NULL, NULL); +} + +device_initcall(mpc52xx_declare_of_platform_devices); diff --git a/arch/powerpc/platforms/52xx/mpc52xx_pic.c b/arch/powerpc/platforms/52xx/mpc52xx_pic.c index 504154fdf6a..cd91a6c3aaf 100644 --- a/arch/powerpc/platforms/52xx/mpc52xx_pic.c +++ b/arch/powerpc/platforms/52xx/mpc52xx_pic.c @@ -54,12 +54,12 @@ static unsigned char mpc52xx_map_senses[4] = { * */ -static inline void io_be_setbit(u32 __iomem * addr, int bitno) +static inline void io_be_setbit(u32 __iomem *addr, int bitno) { out_be32(addr, in_be32(addr) | (1 << bitno)); } -static inline void io_be_clrbit(u32 __iomem * addr, int bitno) +static inline void io_be_clrbit(u32 __iomem *addr, int bitno) { out_be32(addr, in_be32(addr) & ~(1 << bitno)); } @@ -104,7 +104,7 @@ static void mpc52xx_extirq_ack(unsigned int virq) pr_debug("%s: irq=%x. l2=%d\n", __func__, irq, l2irq); - io_be_setbit(&intr->ctrl, 27 - l2irq); + io_be_setbit(&intr->ctrl, 27-l2irq); } static struct irq_chip mpc52xx_extirq_irqchip = { @@ -379,81 +379,21 @@ static struct irq_host_ops mpc52xx_irqhost_ops = { void __init mpc52xx_init_irq(void) { - struct device_node *picnode = NULL; - int picnode_regsize; - u32 picnode_regoffset; - - struct device_node *sdmanode = NULL; - int sdmanode_regsize; - u32 sdmanode_regoffset; - - u64 size64; - int flags; - u32 intr_ctrl; - - picnode = of_find_compatible_node(NULL, "interrupt-controller", - "mpc5200-pic"); - if (picnode == NULL) { - printk(KERN_ERR "MPC52xx PIC: " - "Unable to find the interrupt controller " - "in the OpenFirmware device tree\n"); - goto end; - } - - sdmanode = of_find_compatible_node(NULL, "dma-controller", - "mpc5200-bestcomm"); - if (sdmanode == NULL) { - printk(KERN_ERR "MPC52xx PIC" - "Unable to find the Bestcomm DMA controller device " - "in the OpenFirmware device tree\n"); - goto end; - } - - /* Retrieve PIC ressources */ - picnode_regoffset = (u32) of_get_address(picnode, 0, &size64, &flags); - if (picnode_regoffset == 0) { - printk(KERN_ERR "MPC52xx PIC" - "Unable to get the interrupt controller address\n"); - goto end; - } - - picnode_regoffset = - of_translate_address(picnode, (u32 *) picnode_regoffset); - picnode_regsize = (int)size64; - - /* Retrieve SDMA ressources */ - sdmanode_regoffset = (u32) of_get_address(sdmanode, 0, &size64, &flags); - if (sdmanode_regoffset == 0) { - printk(KERN_ERR "MPC52xx PIC: " - "Unable to get the Bestcomm DMA controller address\n"); - goto end; - } - - sdmanode_regoffset = - of_translate_address(sdmanode, (u32 *) sdmanode_regoffset); - sdmanode_regsize = (int)size64; + struct device_node *picnode; /* Remap the necessary zones */ - intr = ioremap(picnode_regoffset, picnode_regsize); - if (intr == NULL) { - printk(KERN_ERR "MPC52xx PIC: " - "Unable to ioremap interrupt controller registers!\n"); - goto end; - } + picnode = of_find_compatible_node(NULL, NULL, "mpc52xx-pic"); - sdma = ioremap(sdmanode_regoffset, sdmanode_regsize); - if (sdma == NULL) { - iounmap(intr); - printk(KERN_ERR "MPC52xx PIC: " - "Unable to ioremap Bestcomm DMA registers!\n"); - goto end; - } + intr = mpc52xx_find_and_map("mpc52xx-pic"); + if (!intr) + panic(__FILE__ ": find_and_map failed on 'mpc52xx-pic'. " + "Check node !"); - printk(KERN_INFO "MPC52xx PIC: MPC52xx PIC Remapped at 0x%8.8x\n", - picnode_regoffset); - printk(KERN_INFO "MPC52xx PIC: MPC52xx SDMA Remapped at 0x%8.8x\n", - sdmanode_regoffset); + sdma = mpc52xx_find_and_map("mpc52xx-bestcomm"); + if (!sdma) + panic(__FILE__ ": find_and_map failed on 'mpc52xx-bestcomm'. " + "Check node !"); /* Disable all interrupt sources. */ out_be32(&sdma->IntPend, 0xffffffff); /* 1 means clear pending */ @@ -480,21 +420,15 @@ void __init mpc52xx_init_irq(void) * hw irq information provided by the ofw to linux virq */ - mpc52xx_irqhost = - irq_alloc_host(IRQ_HOST_MAP_LINEAR, MPC52xx_IRQ_HIGHTESTHWIRQ, - &mpc52xx_irqhost_ops, -1); + mpc52xx_irqhost = irq_alloc_host(IRQ_HOST_MAP_LINEAR, + MPC52xx_IRQ_HIGHTESTHWIRQ, + &mpc52xx_irqhost_ops, -1); - if (mpc52xx_irqhost) { - mpc52xx_irqhost->host_data = picnode; - printk(KERN_INFO "MPC52xx PIC is up and running!\n"); - } else { - printk(KERN_ERR - "MPC52xx PIC: Unable to allocate the IRQ host\n"); - } + if (!mpc52xx_irqhost) + panic(__FILE__ ": Cannot allocate the IRQ host\n"); -end: - of_node_put(picnode); - of_node_put(sdmanode); + mpc52xx_irqhost->host_data = picnode; + printk(KERN_INFO "MPC52xx PIC is up and running!\n"); } /* @@ -526,9 +460,10 @@ unsigned int mpc52xx_get_irq(void) irq = ffs(status) - 1; irq |= (MPC52xx_IRQ_L1_SDMA << MPC52xx_IRQ_L1_OFFSET) & MPC52xx_IRQ_L1_MASK; - } else + } else { irq |= (MPC52xx_IRQ_L1_PERP << MPC52xx_IRQ_L1_OFFSET) & MPC52xx_IRQ_L1_MASK; + } } pr_debug("%s: irq=%x. virq=%d\n", __func__, irq, @@ -536,4 +471,3 @@ unsigned int mpc52xx_get_irq(void) return irq_linear_revmap(mpc52xx_irqhost, irq); } - diff --git a/include/asm-powerpc/mpc52xx.h b/include/asm-powerpc/mpc52xx.h index fff752c4bd1..4a28a850998 100644 --- a/include/asm-powerpc/mpc52xx.h +++ b/include/asm-powerpc/mpc52xx.h @@ -241,6 +241,10 @@ struct mpc52xx_cdm { #ifndef __ASSEMBLY__ +extern void __iomem * mpc52xx_find_and_map(const char *); +extern unsigned int mpc52xx_find_ipb_freq(struct device_node *node); +extern void mpc52xx_setup_cpu(void); + extern void mpc52xx_init_irq(void); extern unsigned int mpc52xx_get_irq(void); -- cgit v1.2.3-70-g09d2 From 6b64253139a20b7db1f701a9117bc5174eb878bc Mon Sep 17 00:00:00 2001 From: Grant Likely Date: Mon, 27 Nov 2006 14:16:28 -0700 Subject: [POWERPC] Add lite5200 board support to arch/powerpc Signed-off-by: Grant Likely Acked-by: Sylvain Munaut Signed-off-by: Paul Mackerras --- arch/powerpc/Kconfig | 6 ++ arch/powerpc/platforms/52xx/Makefile | 3 +- arch/powerpc/platforms/52xx/lite5200.c | 162 +++++++++++++++++++++++++++++++++ 3 files changed, 170 insertions(+), 1 deletion(-) create mode 100644 arch/powerpc/platforms/52xx/lite5200.c (limited to 'arch/powerpc') diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index a6bc221ad1b..7b63ede083f 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -423,6 +423,12 @@ config PPC_EFIKA select PPC_NATIVE default y +config PPC_LITE5200 + bool "Freescale Lite5200 Eval Board" + depends on PPC_MULTIPLATFORM && PPC32 + select PPC_MPC52xx + default n + config PPC_PMAC bool "Apple PowerMac based machines" depends on PPC_MULTIPLATFORM diff --git a/arch/powerpc/platforms/52xx/Makefile b/arch/powerpc/platforms/52xx/Makefile index b8f27a86406..a46184a0c75 100644 --- a/arch/powerpc/platforms/52xx/Makefile +++ b/arch/powerpc/platforms/52xx/Makefile @@ -5,4 +5,5 @@ ifeq ($(CONFIG_PPC_MERGE),y) obj-y += mpc52xx_pic.o mpc52xx_common.o endif -obj-$(CONFIG_PPC_EFIKA) += efika-setup.o efika-pci.o +obj-$(CONFIG_PPC_EFIKA) += efika-setup.o efika-pci.o +obj-$(CONFIG_PPC_LITE5200) += lite5200.o diff --git a/arch/powerpc/platforms/52xx/lite5200.c b/arch/powerpc/platforms/52xx/lite5200.c new file mode 100644 index 00000000000..a375c15b431 --- /dev/null +++ b/arch/powerpc/platforms/52xx/lite5200.c @@ -0,0 +1,162 @@ +/* + * Freescale Lite5200 board support + * + * Written by: Grant Likely + * + * Copyright (C) Secret Lab Technologies Ltd. 2006. All rights reserved. + * Copyright (C) Freescale Semicondutor, Inc. 2006. All rights reserved. + * + * Description: + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#undef DEBUG + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +/* ************************************************************************ + * + * Setup the architecture + * + */ + +static void __init +lite52xx_setup_cpu(void) +{ + struct mpc52xx_gpio __iomem *gpio; + u32 port_config; + + /* Map zones */ + gpio = mpc52xx_find_and_map("mpc52xx-gpio"); + if (!gpio) { + printk(KERN_ERR __FILE__ ": " + "Error while mapping GPIO register for port config. " + "Expect some abnormal behavior\n"); + goto error; + } + + /* Set port config */ + port_config = in_be32(&gpio->port_config); + + port_config &= ~0x00800000; /* 48Mhz internal, pin is GPIO */ + + port_config &= ~0x00007000; /* USB port : Differential mode */ + port_config |= 0x00001000; /* USB 1 only */ + + port_config &= ~0x03000000; /* ATA CS is on csb_4/5 */ + port_config |= 0x01000000; + + pr_debug("port_config: old:%x new:%x\n", + in_be32(&gpio->port_config), port_config); + out_be32(&gpio->port_config, port_config); + + /* Unmap zone */ +error: + iounmap(gpio); +} + +static void __init lite52xx_setup_arch(void) +{ + struct device_node *np; + + if (ppc_md.progress) + ppc_md.progress("lite52xx_setup_arch()", 0); + + np = of_find_node_by_type(NULL, "cpu"); + if (np) { + unsigned int *fp = + (int *)get_property(np, "clock-frequency", NULL); + if (fp != 0) + loops_per_jiffy = *fp / HZ; + else + loops_per_jiffy = 50000000 / HZ; + of_node_put(np); + } + + /* CPU & Port mux setup */ + mpc52xx_setup_cpu(); /* Generic */ + lite52xx_setup_cpu(); /* Platorm specific */ + +#ifdef CONFIG_BLK_DEV_INITRD + if (initrd_start) + ROOT_DEV = Root_RAM0; + else +#endif +#ifdef CONFIG_ROOT_NFS + ROOT_DEV = Root_NFS; +#else + ROOT_DEV = Root_HDA1; +#endif + +} + +void lite52xx_show_cpuinfo(struct seq_file *m) +{ + struct device_node* np = of_find_all_nodes(NULL); + const char *model = NULL; + + if (np) + model = get_property(np, "model", NULL); + + seq_printf(m, "vendor\t\t: Freescale Semiconductor\n"); + seq_printf(m, "machine\t\t: %s\n", model ? model : "unknown"); + + of_node_put(np); +} + +/* + * Called very early, MMU is off, device-tree isn't unflattened + */ +static int __init lite52xx_probe(void) +{ + unsigned long node = of_get_flat_dt_root(); + const char *model = of_get_flat_dt_prop(node, "model", NULL); + + if (!of_flat_dt_is_compatible(node, "lite52xx")) + return 0; + pr_debug("%s board w/ mpc52xx found\n", model ? model : "unknown"); + + return 1; +} + +define_machine(lite52xx) { + .name = "lite52xx", + .probe = lite52xx_probe, + .setup_arch = lite52xx_setup_arch, + .init_IRQ = mpc52xx_init_irq, + .get_irq = mpc52xx_get_irq, + .show_cpuinfo = lite52xx_show_cpuinfo, + .calibrate_decr = generic_calibrate_decr, +}; -- cgit v1.2.3-70-g09d2 From c6d4d657c2f11fe3b33dd8303f57a8b8d55323d6 Mon Sep 17 00:00:00 2001 From: Grant Likely Date: Mon, 27 Nov 2006 14:16:29 -0700 Subject: [POWERPC] Add device trees for lite5200 and lite5200b eval boards Signed-off-by: Grant Likely Acked-by: Sylvain Munaut Signed-off-by: Paul Mackerras --- arch/powerpc/boot/dts/lite5200.dts | 313 +++++++++++++++++++++++++++++++++++ arch/powerpc/boot/dts/lite5200b.dts | 318 ++++++++++++++++++++++++++++++++++++ 2 files changed, 631 insertions(+) create mode 100644 arch/powerpc/boot/dts/lite5200.dts create mode 100644 arch/powerpc/boot/dts/lite5200b.dts (limited to 'arch/powerpc') diff --git a/arch/powerpc/boot/dts/lite5200.dts b/arch/powerpc/boot/dts/lite5200.dts new file mode 100644 index 00000000000..8bc0d259796 --- /dev/null +++ b/arch/powerpc/boot/dts/lite5200.dts @@ -0,0 +1,313 @@ +/* + * Lite5200 board Device Tree Source + * + * Copyright 2006 Secret Lab Technologies Ltd. + * Grant Likely + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/ { + model = "Lite5200"; + compatible = "lite5200\0lite52xx\0mpc5200\0mpc52xx"; + #address-cells = <1>; + #size-cells = <1>; + + cpus { + #cpus = <1>; + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,5200@0 { + device_type = "cpu"; + reg = <0>; + d-cache-line-size = <20>; + i-cache-line-size = <20>; + d-cache-size = <4000>; // L1, 16K + i-cache-size = <4000>; // L1, 16K + timebase-frequency = <0>; // from bootloader + bus-frequency = <0>; // from bootloader + clock-frequency = <0>; // from bootloader + 32-bit; + }; + }; + + memory { + device_type = "memory"; + reg = <00000000 04000000>; // 64MB + }; + + soc5200@f0000000 { + #interrupt-cells = <3>; + device_type = "soc"; + ranges = <0 f0000000 f0010000>; + reg = ; + bus-frequency = <0>; // from bootloader + + cdm@200 { + compatible = "mpc5200-cdm\0mpc52xx-cdm"; + reg = <200 38>; + }; + + pic@500 { + // 5200 interrupts are encoded into two levels; + linux,phandle = <500>; + interrupt-controller; + #interrupt-cells = <3>; + device_type = "interrupt-controller"; + compatible = "mpc5200-pic\0mpc52xx-pic"; + reg = <500 80>; + built-in; + }; + + gpt@600 { // General Purpose Timer + compatible = "mpc5200-gpt\0mpc52xx-gpt"; + device_type = "gpt"; + reg = <600 10>; + interrupts = <1 9 0>; + interrupt-parent = <500>; + }; + + gpt@610 { // General Purpose Timer + compatible = "mpc5200-gpt\0mpc52xx-gpt"; + device_type = "gpt"; + reg = <610 10>; + interrupts = <1 a 0>; + interrupt-parent = <500>; + }; + + gpt@620 { // General Purpose Timer + compatible = "mpc5200-gpt\0mpc52xx-gpt"; + device_type = "gpt"; + reg = <620 10>; + interrupts = <1 b 0>; + interrupt-parent = <500>; + }; + + gpt@630 { // General Purpose Timer + compatible = "mpc5200-gpt\0mpc52xx-gpt"; + device_type = "gpt"; + reg = <630 10>; + interrupts = <1 c 0>; + interrupt-parent = <500>; + }; + + gpt@640 { // General Purpose Timer + compatible = "mpc5200-gpt\0mpc52xx-gpt"; + device_type = "gpt"; + reg = <640 10>; + interrupts = <1 d 0>; + interrupt-parent = <500>; + }; + + gpt@650 { // General Purpose Timer + compatible = "mpc5200-gpt\0mpc52xx-gpt"; + device_type = "gpt"; + reg = <650 10>; + interrupts = <1 e 0>; + interrupt-parent = <500>; + }; + + gpt@660 { // General Purpose Timer + compatible = "mpc5200-gpt\0mpc52xx-gpt"; + device_type = "gpt"; + reg = <660 10>; + interrupts = <1 f 0>; + interrupt-parent = <500>; + }; + + gpt@670 { // General Purpose Timer + compatible = "mpc5200-gpt\0mpc52xx-gpt"; + device_type = "gpt"; + reg = <670 10>; + interrupts = <1 10 0>; + interrupt-parent = <500>; + }; + + rtc@800 { // Real time clock + compatible = "mpc5200-rtc\0mpc52xx-rtc"; + device_type = "rtc"; + reg = <800 100>; + interrupts = <1 5 0 1 6 0>; + interrupt-parent = <500>; + }; + + mscan@900 { + device_type = "mscan"; + compatible = "mpc5200-mscan\0mpc52xx-mscan"; + interrupts = <2 11 0>; + interrupt-parent = <500>; + reg = <900 80>; + }; + + mscan@980 { + device_type = "mscan"; + compatible = "mpc5200-mscan\0mpc52xx-mscan"; + interrupts = <1 12 0>; + interrupt-parent = <500>; + reg = <980 80>; + }; + + gpio@b00 { + compatible = "mpc5200-gpio\0mpc52xx-gpio"; + reg = ; + interrupts = <1 7 0>; + interrupt-parent = <500>; + }; + + gpio-wkup@b00 { + compatible = "mpc5200-gpio-wkup\0mpc52xx-gpio-wkup"; + reg = ; + interrupts = <1 8 0 0 3 0>; + interrupt-parent = <500>; + }; + + pci@0d00 { + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + compatible = "mpc5200-pci\0mpc52xx-pci"; + reg = ; + interrupt-map-mask = ; + interrupt-map = ; + clock-frequency = <0>; // From boot loader + interrupts = <2 8 0 2 9 0 2 a 0>; + interrupt-parent = <500>; + bus-range = <0 0>; + ranges = <42000000 0 80000000 80000000 0 20000000 + 02000000 0 a0000000 a0000000 0 10000000 + 01000000 0 00000000 b0000000 0 01000000>; + }; + + spi@f00 { + device_type = "spi"; + compatible = "mpc5200-spi\0mpc52xx-spi"; + reg = ; + interrupts = <2 d 0 2 e 0>; + interrupt-parent = <500>; + }; + + usb@1000 { + device_type = "usb-ohci-be"; + compatible = "mpc5200-ohci\0mpc52xx-ohci\0ohci-be"; + reg = <1000 ff>; + interrupts = <2 6 0>; + interrupt-parent = <500>; + }; + + bestcomm@1200 { + device_type = "dma-controller"; + compatible = "mpc5200-bestcomm\0mpc52xx-bestcomm"; + reg = <1200 80>; + interrupts = <3 0 0 3 1 0 3 2 0 3 3 0 + 3 4 0 3 5 0 3 6 0 3 7 0 + 3 8 0 3 9 0 3 a 0 3 b 0 + 3 c 0 3 d 0 3 e 0 3 f 0>; + interrupt-parent = <500>; + }; + + xlb@1f00 { + compatible = "mpc5200-xlb\0mpc52xx-xlb"; + reg = <1f00 100>; + }; + + serial@2000 { // PSC1 + device_type = "serial"; + compatible = "mpc5200-psc-uart\0mpc52xx-psc-uart"; + port-number = <0>; // Logical port assignment + reg = <2000 100>; + interrupts = <2 1 0>; + interrupt-parent = <500>; + }; + + // PSC2 in spi mode example + spi@2200 { // PSC2 + device_type = "spi"; + compatible = "mpc5200-psc-spi\0mpc52xx-psc-spi"; + reg = <2200 100>; + interrupts = <2 2 0>; + interrupt-parent = <500>; + }; + + // PSC3 in CODEC mode example + i2s@2400 { // PSC3 + device_type = "i2s"; + compatible = "mpc5200-psc-i2s\0mpc52xx-psc-i2s"; + reg = <2400 100>; + interrupts = <2 3 0>; + interrupt-parent = <500>; + }; + + // PSC4 unconfigured + //serial@2600 { // PSC4 + // device_type = "serial"; + // compatible = "mpc5200-psc-uart\0mpc52xx-psc-uart"; + // reg = <2600 100>; + // interrupts = <2 b 0>; + // interrupt-parent = <500>; + //}; + + // PSC5 unconfigured + //serial@2800 { // PSC5 + // device_type = "serial"; + // compatible = "mpc5200-psc-uart\0mpc52xx-psc-uart"; + // reg = <2800 100>; + // interrupts = <2 c 0>; + // interrupt-parent = <500>; + //}; + + // PSC6 in AC97 mode example + ac97@2c00 { // PSC6 + device_type = "ac97"; + compatible = "mpc5200-psc-ac97\0mpc52xx-psc-ac97"; + reg = <2c00 100>; + interrupts = <2 4 0>; + interrupt-parent = <500>; + }; + + ethernet@3000 { + device_type = "network"; + compatible = "mpc5200-fec\0mpc52xx-fec"; + reg = <3000 800>; + mac-address = [ 02 03 04 05 06 07 ]; // Bad! + interrupts = <2 5 0>; + interrupt-parent = <500>; + }; + + ata@3a00 { + device_type = "ata"; + compatible = "mpc5200-ata\0mpc52xx-ata"; + reg = <3a00 100>; + interrupts = <2 7 0>; + interrupt-parent = <500>; + }; + + i2c@3d00 { + device_type = "i2c"; + compatible = "mpc5200-i2c\0mpc52xx-i2c"; + reg = <3d00 40>; + interrupts = <2 f 0>; + interrupt-parent = <500>; + }; + + i2c@3d40 { + device_type = "i2c"; + compatible = "mpc5200-i2c\0mpc52xx-i2c"; + reg = <3d40 40>; + interrupts = <2 10 0>; + interrupt-parent = <500>; + }; + sram@8000 { + device_type = "sram"; + compatible = "mpc5200-sram\0mpc52xx-sram\0sram"; + reg = <8000 4000>; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/lite5200b.dts b/arch/powerpc/boot/dts/lite5200b.dts new file mode 100644 index 00000000000..81cb76418a7 --- /dev/null +++ b/arch/powerpc/boot/dts/lite5200b.dts @@ -0,0 +1,318 @@ +/* + * Lite5200B board Device Tree Source + * + * Copyright 2006 Secret Lab Technologies Ltd. + * Grant Likely + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/ { + model = "Lite5200b"; + compatible = "lite5200b\0lite52xx\0mpc5200b\0mpc52xx"; + #address-cells = <1>; + #size-cells = <1>; + + cpus { + #cpus = <1>; + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,5200@0 { + device_type = "cpu"; + reg = <0>; + d-cache-line-size = <20>; + i-cache-line-size = <20>; + d-cache-size = <4000>; // L1, 16K + i-cache-size = <4000>; // L1, 16K + timebase-frequency = <0>; // from bootloader + bus-frequency = <0>; // from bootloader + clock-frequency = <0>; // from bootloader + 32-bit; + }; + }; + + memory { + device_type = "memory"; + reg = <00000000 10000000>; // 256MB + }; + + soc5200@f0000000 { + #interrupt-cells = <3>; + device_type = "soc"; + ranges = <0 f0000000 f0010000>; + reg = ; + bus-frequency = <0>; // from bootloader + + cdm@200 { + compatible = "mpc5200b-cdm\0mpc52xx-cdm"; + reg = <200 38>; + }; + + pic@500 { + // 5200 interrupts are encoded into two levels; + linux,phandle = <500>; + interrupt-controller; + #interrupt-cells = <3>; + device_type = "interrupt-controller"; + compatible = "mpc5200b-pic\0mpc52xx-pic"; + reg = <500 80>; + built-in; + }; + + gpt@600 { // General Purpose Timer + compatible = "mpc5200b-gpt\0mpc52xx-gpt"; + device_type = "gpt"; + reg = <600 10>; + interrupts = <1 9 0>; + interrupt-parent = <500>; + }; + + gpt@610 { // General Purpose Timer + compatible = "mpc5200b-gpt\0mpc52xx-gpt"; + device_type = "gpt"; + reg = <610 10>; + interrupts = <1 a 0>; + interrupt-parent = <500>; + }; + + gpt@620 { // General Purpose Timer + compatible = "mpc5200b-gpt\0mpc52xx-gpt"; + device_type = "gpt"; + reg = <620 10>; + interrupts = <1 b 0>; + interrupt-parent = <500>; + }; + + gpt@630 { // General Purpose Timer + compatible = "mpc5200b-gpt\0mpc52xx-gpt"; + device_type = "gpt"; + reg = <630 10>; + interrupts = <1 c 0>; + interrupt-parent = <500>; + }; + + gpt@640 { // General Purpose Timer + compatible = "mpc5200b-gpt\0mpc52xx-gpt"; + device_type = "gpt"; + reg = <640 10>; + interrupts = <1 d 0>; + interrupt-parent = <500>; + }; + + gpt@650 { // General Purpose Timer + compatible = "mpc5200b-gpt\0mpc52xx-gpt"; + device_type = "gpt"; + reg = <650 10>; + interrupts = <1 e 0>; + interrupt-parent = <500>; + }; + + gpt@660 { // General Purpose Timer + compatible = "mpc5200b-gpt\0mpc52xx-gpt"; + device_type = "gpt"; + reg = <660 10>; + interrupts = <1 f 0>; + interrupt-parent = <500>; + }; + + gpt@670 { // General Purpose Timer + compatible = "mpc5200b-gpt\0mpc52xx-gpt"; + device_type = "gpt"; + reg = <670 10>; + interrupts = <1 10 0>; + interrupt-parent = <500>; + }; + + rtc@800 { // Real time clock + compatible = "mpc5200b-rtc\0mpc52xx-rtc"; + device_type = "rtc"; + reg = <800 100>; + interrupts = <1 5 0 1 6 0>; + interrupt-parent = <500>; + }; + + mscan@900 { + device_type = "mscan"; + compatible = "mpc5200b-mscan\0mpc52xx-mscan"; + interrupts = <2 11 0>; + interrupt-parent = <500>; + reg = <900 80>; + }; + + mscan@980 { + device_type = "mscan"; + compatible = "mpc5200b-mscan\0mpc52xx-mscan"; + interrupts = <1 12 0>; + interrupt-parent = <500>; + reg = <980 80>; + }; + + gpio@b00 { + compatible = "mpc5200b-gpio\0mpc52xx-gpio"; + reg = ; + interrupts = <1 7 0>; + interrupt-parent = <500>; + }; + + gpio-wkup@b00 { + compatible = "mpc5200b-gpio-wkup\0mpc52xx-gpio-wkup"; + reg = ; + interrupts = <1 8 0 0 3 0>; + interrupt-parent = <500>; + }; + + pci@0d00 { + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + compatible = "mpc5200b-pci\0mpc52xx-pci"; + reg = ; + interrupt-map-mask = ; + interrupt-map = ; + clock-frequency = <0>; // From boot loader + interrupts = <2 8 0 2 9 0 2 a 0>; + interrupt-parent = <500>; + bus-range = <0 0>; + ranges = <42000000 0 80000000 80000000 0 20000000 + 02000000 0 a0000000 a0000000 0 10000000 + 01000000 0 00000000 b0000000 0 01000000>; + }; + + spi@f00 { + device_type = "spi"; + compatible = "mpc5200b-spi\0mpc52xx-spi"; + reg = ; + interrupts = <2 d 0 2 e 0>; + interrupt-parent = <500>; + }; + + usb@1000 { + device_type = "usb-ohci-be"; + compatible = "mpc5200b-ohci\0mpc52xx-ohci\0ohci-be"; + reg = <1000 ff>; + interrupts = <2 6 0>; + interrupt-parent = <500>; + }; + + bestcomm@1200 { + device_type = "dma-controller"; + compatible = "mpc5200b-bestcomm\0mpc52xx-bestcomm"; + reg = <1200 80>; + interrupts = <3 0 0 3 1 0 3 2 0 3 3 0 + 3 4 0 3 5 0 3 6 0 3 7 0 + 3 8 0 3 9 0 3 a 0 3 b 0 + 3 c 0 3 d 0 3 e 0 3 f 0>; + interrupt-parent = <500>; + }; + + xlb@1f00 { + compatible = "mpc5200b-xlb\0mpc52xx-xlb"; + reg = <1f00 100>; + }; + + serial@2000 { // PSC1 + device_type = "serial"; + compatible = "mpc5200b-psc-uart\0mpc52xx-psc-uart"; + port-number = <0>; // Logical port assignment + reg = <2000 100>; + interrupts = <2 1 0>; + interrupt-parent = <500>; + }; + + // PSC2 in spi mode example + spi@2200 { // PSC2 + device_type = "spi"; + compatible = "mpc5200b-psc-spi\0mpc52xx-psc-spi"; + reg = <2200 100>; + interrupts = <2 2 0>; + interrupt-parent = <500>; + }; + + // PSC3 in CODEC mode example + i2s@2400 { // PSC3 + device_type = "i2s"; + compatible = "mpc5200b-psc-i2s\0mpc52xx-psc-i2s"; + reg = <2400 100>; + interrupts = <2 3 0>; + interrupt-parent = <500>; + }; + + // PSC4 unconfigured + //serial@2600 { // PSC4 + // device_type = "serial"; + // compatible = "mpc5200b-psc-uart\0mpc52xx-psc-uart"; + // reg = <2600 100>; + // interrupts = <2 b 0>; + // interrupt-parent = <500>; + //}; + + // PSC5 unconfigured + //serial@2800 { // PSC5 + // device_type = "serial"; + // compatible = "mpc5200b-psc-uart\0mpc52xx-psc-uart"; + // reg = <2800 100>; + // interrupts = <2 c 0>; + // interrupt-parent = <500>; + //}; + + // PSC6 in AC97 mode example + ac97@2c00 { // PSC6 + device_type = "ac97"; + compatible = "mpc5200b-psc-ac97\0mpc52xx-psc-ac97"; + reg = <2c00 100>; + interrupts = <2 4 0>; + interrupt-parent = <500>; + }; + + ethernet@3000 { + device_type = "network"; + compatible = "mpc5200b-fec\0mpc52xx-fec"; + reg = <3000 800>; + mac-address = [ 02 03 04 05 06 07 ]; // Bad! + interrupts = <2 5 0>; + interrupt-parent = <500>; + }; + + ata@3a00 { + device_type = "ata"; + compatible = "mpc5200b-ata\0mpc52xx-ata"; + reg = <3a00 100>; + interrupts = <2 7 0>; + interrupt-parent = <500>; + }; + + i2c@3d00 { + device_type = "i2c"; + compatible = "mpc5200b-i2c\0mpc52xx-i2c"; + reg = <3d00 40>; + interrupts = <2 f 0>; + interrupt-parent = <500>; + }; + + i2c@3d40 { + device_type = "i2c"; + compatible = "mpc5200b-i2c\0mpc52xx-i2c"; + reg = <3d40 40>; + interrupts = <2 10 0>; + interrupt-parent = <500>; + }; + sram@8000 { + device_type = "sram"; + compatible = "mpc5200b-sram\0mpc52xx-sram\0sram"; + reg = <8000 4000>; + }; + }; +}; -- cgit v1.2.3-70-g09d2 From ede8edb35b95c78c890b15fdb6cedcb3f42f4769 Mon Sep 17 00:00:00 2001 From: Grant Likely Date: Mon, 27 Nov 2006 14:16:30 -0700 Subject: [POWERPC] defconfig for lite5200 board Signed-off-by: Grant Likely Acked-by: Sylvain Munaut Signed-off-by: Paul Mackerras --- arch/powerpc/configs/lite5200_defconfig | 931 ++++++++++++++++++++++++++++++++ 1 file changed, 931 insertions(+) create mode 100644 arch/powerpc/configs/lite5200_defconfig (limited to 'arch/powerpc') diff --git a/arch/powerpc/configs/lite5200_defconfig b/arch/powerpc/configs/lite5200_defconfig new file mode 100644 index 00000000000..ee7655776d4 --- /dev/null +++ b/arch/powerpc/configs/lite5200_defconfig @@ -0,0 +1,931 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.19-rc6 +# Mon Nov 27 11:08:20 2006 +# +# CONFIG_PPC64 is not set +CONFIG_PPC32=y +CONFIG_PPC_MERGE=y +CONFIG_MMU=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_IRQ_PER_CPU=y +CONFIG_RWSEM_XCHGADD_ALGORITHM=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_PPC=y +CONFIG_EARLY_PRINTK=y +CONFIG_GENERIC_NVRAM=y +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_ARCH_MAY_HAVE_PC_FDC=y +CONFIG_PPC_OF=y +# CONFIG_PPC_UDBG_16550 is not set +# CONFIG_GENERIC_TBSYNC is not set +CONFIG_AUDIT_ARCH=y +# CONFIG_DEFAULT_UIMAGE is not set + +# +# Processor support +# +CONFIG_CLASSIC32=y +# CONFIG_PPC_52xx is not set +# CONFIG_PPC_82xx is not set +# CONFIG_PPC_83xx is not set +# CONFIG_PPC_85xx is not set +# CONFIG_PPC_86xx is not set +# CONFIG_40x is not set +# CONFIG_44x is not set +# CONFIG_8xx is not set +# CONFIG_E200 is not set +CONFIG_6xx=y +CONFIG_PPC_FPU=y +# CONFIG_PPC_DCR_NATIVE is not set +# CONFIG_PPC_DCR_MMIO is not set +# CONFIG_ALTIVEC is not set +CONFIG_PPC_STD_MMU=y +CONFIG_PPC_STD_MMU_32=y +# CONFIG_SMP is not set +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 + +# +# General setup +# +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +# CONFIG_IPC_NS is not set +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_UTS_NS is not set +# CONFIG_AUDIT is not set +# CONFIG_IKCONFIG is not set +# CONFIG_RELAY is not set +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +# CONFIG_SYSCTL_SYSCALL is not set +# CONFIG_KALLSYMS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +# CONFIG_EPOLL is not set +CONFIG_SHMEM=y +CONFIG_SLAB=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +# CONFIG_SLOB is not set + +# +# Loadable module support +# +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +# CONFIG_KMOD is not set + +# +# Block layer +# +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + +# +# Platform support +# +CONFIG_PPC_MULTIPLATFORM=y +# CONFIG_EMBEDDED6xx is not set +# CONFIG_APUS is not set +# CONFIG_PPC_CHRP is not set +CONFIG_PPC_MPC52xx=y +# CONFIG_PPC_EFIKA is not set +CONFIG_PPC_LITE5200=y +# CONFIG_PPC_PMAC is not set +# CONFIG_PPC_CELL is not set +# CONFIG_PPC_CELL_NATIVE is not set +# CONFIG_PPC_RTAS is not set +# CONFIG_MMIO_NVRAM is not set +# CONFIG_PPC_MPC106 is not set +# CONFIG_PPC_970_NAP is not set +# CONFIG_PPC_INDIRECT_IO is not set +# CONFIG_GENERIC_IOMAP is not set +# CONFIG_CPU_FREQ is not set +# CONFIG_TAU is not set +# CONFIG_WANT_EARLY_SERIAL is not set +# CONFIG_MPIC is not set + +# +# Kernel options +# +# CONFIG_HIGHMEM is not set +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_MISC is not set +CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y +# CONFIG_KEXEC is not set +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_POPULATES_NODE_MAP=y +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_PROC_DEVICETREE=y +# CONFIG_CMDLINE_BOOL is not set +CONFIG_PM=y +# CONFIG_PM_LEGACY is not set +# CONFIG_PM_DEBUG is not set +# CONFIG_PM_SYSFS_DEPRECATED is not set +# CONFIG_SOFTWARE_SUSPEND is not set +CONFIG_SECCOMP=y +CONFIG_ISA_DMA_API=y + +# +# Bus options +# +CONFIG_GENERIC_ISA_DMA=y +# CONFIG_MPIC_WEIRD is not set +# CONFIG_PPC_I8259 is not set +# CONFIG_PPC_INDIRECT_PCI is not set +CONFIG_PCI=y +CONFIG_PCI_DOMAINS=y +# CONFIG_PCIEPORTBUS is not set +# CONFIG_PCI_DEBUG is not set + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set + +# +# PCI Hotplug Support +# +# CONFIG_HOTPLUG_PCI is not set + +# +# Advanced setup +# +# CONFIG_ADVANCED_OPTIONS is not set + +# +# Default settings for advanced configuration options are used +# +CONFIG_HIGHMEM_START=0xfe000000 +CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_KERNEL_START=0xc0000000 +CONFIG_TASK_SIZE=0x80000000 +CONFIG_BOOT_LOAD=0x00800000 + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +# CONFIG_NETDEBUG is not set +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +CONFIG_XFRM_USER=m +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_IP_MROUTE is not set +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set + +# +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_IEEE80211 is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_SYS_HYPERVISOR is not set + +# +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set + +# +# Memory Technology Devices (MTD) +# +# CONFIG_MTD is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# + +# +# Block devices +# +# CONFIG_BLK_DEV_FD is not set +# CONFIG_BLK_CPQ_DA is not set +# CONFIG_BLK_CPQ_CISS_DA is not set +# CONFIG_BLK_DEV_DAC960 is not set +# CONFIG_BLK_DEV_UMEM is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_SX8 is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=32768 +CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +CONFIG_BLK_DEV_INITRD=y +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set + +# +# Misc devices +# +# CONFIG_SGI_IOC4 is not set +# CONFIG_TIFM_CORE is not set + +# +# ATA/ATAPI/MFM/RLL support +# +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +# CONFIG_SCSI_NETLINK is not set +# CONFIG_SCSI_PROC_FS is not set + +# +# SCSI support type (disk, tape, CD-ROM) +# +# CONFIG_BLK_DEV_SD is not set +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +# CONFIG_CHR_DEV_SG is not set +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set + +# +# SCSI low-level drivers +# +# CONFIG_ISCSI_TCP is not set +# CONFIG_BLK_DEV_3W_XXXX_RAID is not set +# CONFIG_SCSI_3W_9XXX is not set +# CONFIG_SCSI_ACARD is not set +# CONFIG_SCSI_AACRAID is not set +# CONFIG_SCSI_AIC7XXX is not set +# CONFIG_SCSI_AIC7XXX_OLD is not set +# CONFIG_SCSI_AIC79XX is not set +# CONFIG_SCSI_AIC94XX is not set +# CONFIG_SCSI_DPT_I2O is not set +# CONFIG_SCSI_ARCMSR is not set +# CONFIG_MEGARAID_NEWGEN is not set +# CONFIG_MEGARAID_LEGACY is not set +# CONFIG_MEGARAID_SAS is not set +# CONFIG_SCSI_HPTIOP is not set +# CONFIG_SCSI_BUSLOGIC is not set +# CONFIG_SCSI_DMX3191D is not set +# CONFIG_SCSI_EATA is not set +# CONFIG_SCSI_FUTURE_DOMAIN is not set +# CONFIG_SCSI_GDTH is not set +# CONFIG_SCSI_IPS is not set +# CONFIG_SCSI_INITIO is not set +# CONFIG_SCSI_INIA100 is not set +# CONFIG_SCSI_STEX is not set +# CONFIG_SCSI_SYM53C8XX_2 is not set +# CONFIG_SCSI_IPR is not set +# CONFIG_SCSI_QLOGIC_1280 is not set +# CONFIG_SCSI_QLA_FC is not set +# CONFIG_SCSI_QLA_ISCSI is not set +# CONFIG_SCSI_LPFC is not set +# CONFIG_SCSI_DC395x is not set +# CONFIG_SCSI_DC390T is not set +# CONFIG_SCSI_NSP32 is not set +# CONFIG_SCSI_DEBUG is not set + +# +# Serial ATA (prod) and Parallel ATA (experimental) drivers +# +CONFIG_ATA=y +# CONFIG_SATA_AHCI is not set +# CONFIG_SATA_SVW is not set +# CONFIG_ATA_PIIX is not set +# CONFIG_SATA_MV is not set +# CONFIG_SATA_NV is not set +# CONFIG_PDC_ADMA is not set +# CONFIG_SATA_QSTOR is not set +# CONFIG_SATA_PROMISE is not set +# CONFIG_SATA_SX4 is not set +# CONFIG_SATA_SIL is not set +# CONFIG_SATA_SIL24 is not set +# CONFIG_SATA_SIS is not set +# CONFIG_SATA_ULI is not set +# CONFIG_SATA_VIA is not set +# CONFIG_SATA_VITESSE is not set +# CONFIG_PATA_ALI is not set +# CONFIG_PATA_AMD is not set +# CONFIG_PATA_ARTOP is not set +# CONFIG_PATA_ATIIXP is not set +# CONFIG_PATA_CMD64X is not set +# CONFIG_PATA_CS5520 is not set +# CONFIG_PATA_CS5530 is not set +# CONFIG_PATA_CYPRESS is not set +# CONFIG_PATA_EFAR is not set +# CONFIG_ATA_GENERIC is not set +# CONFIG_PATA_HPT366 is not set +# CONFIG_PATA_HPT37X is not set +# CONFIG_PATA_HPT3X2N is not set +# CONFIG_PATA_HPT3X3 is not set +# CONFIG_PATA_IT821X is not set +# CONFIG_PATA_JMICRON is not set +# CONFIG_PATA_TRIFLEX is not set +CONFIG_PATA_MPC52xx=y +# CONFIG_PATA_MPIIX is not set +# CONFIG_PATA_OLDPIIX is not set +# CONFIG_PATA_NETCELL is not set +# CONFIG_PATA_NS87410 is not set +# CONFIG_PATA_OPTI is not set +# CONFIG_PATA_OPTIDMA is not set +# CONFIG_PATA_PDC_OLD is not set +# CONFIG_PATA_RADISYS is not set +# CONFIG_PATA_RZ1000 is not set +# CONFIG_PATA_SC1200 is not set +# CONFIG_PATA_SERVERWORKS is not set +# CONFIG_PATA_PDC2027X is not set +# CONFIG_PATA_SIL680 is not set +# CONFIG_PATA_SIS is not set +# CONFIG_PATA_VIA is not set +# CONFIG_PATA_WINBOND is not set + +# +# Multi-device support (RAID and LVM) +# +# CONFIG_MD is not set + +# +# Fusion MPT device support +# +# CONFIG_FUSION is not set +# CONFIG_FUSION_SPI is not set +# CONFIG_FUSION_FC is not set +# CONFIG_FUSION_SAS is not set + +# +# IEEE 1394 (FireWire) support +# +# CONFIG_IEEE1394 is not set + +# +# I2O device support +# +# CONFIG_I2O is not set + +# +# Macintosh device drivers +# +# CONFIG_WINDFARM is not set + +# +# Network device support +# +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set + +# +# ARCnet devices +# +# CONFIG_ARCNET is not set + +# +# PHY device support +# + +# +# Ethernet (10 or 100Mbit) +# +# CONFIG_NET_ETHERNET is not set + +# +# Ethernet (1000 Mbit) +# +# CONFIG_ACENIC is not set +# CONFIG_DL2K is not set +# CONFIG_E1000 is not set +# CONFIG_NS83820 is not set +# CONFIG_HAMACHI is not set +# CONFIG_YELLOWFIN is not set +# CONFIG_R8169 is not set +# CONFIG_SIS190 is not set +# CONFIG_SKGE is not set +# CONFIG_SKY2 is not set +# CONFIG_SK98LIN is not set +# CONFIG_TIGON3 is not set +# CONFIG_BNX2 is not set +# CONFIG_MV643XX_ETH is not set +# CONFIG_QLA3XXX is not set + +# +# Ethernet (10000 Mbit) +# +# CONFIG_CHELSIO_T1 is not set +# CONFIG_IXGB is not set +# CONFIG_S2IO is not set +# CONFIG_MYRI10GE is not set + +# +# Token Ring devices +# +# CONFIG_TR is not set + +# +# Wireless LAN (non-hamradio) +# +# CONFIG_NET_RADIO is not set + +# +# Wan interfaces +# +# CONFIG_WAN is not set +# CONFIG_FDDI is not set +# CONFIG_HIPPI is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_NET_FC is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Telephony Support +# +# CONFIG_PHONE is not set + +# +# Input device support +# +# CONFIG_INPUT is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +# CONFIG_VT is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_SERIAL_MPC52xx=y +CONFIG_SERIAL_MPC52xx_CONSOLE=y +CONFIG_SERIAL_MPC52xx_CONSOLE_BAUD=9600 +# CONFIG_SERIAL_JSM is not set +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set + +# +# Watchdog Cards +# +# CONFIG_WATCHDOG is not set +# CONFIG_HW_RANDOM is not set +# CONFIG_NVRAM is not set +# CONFIG_GEN_RTC is not set +# CONFIG_DTLK is not set +# CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set + +# +# Ftape, the floppy tape device driver +# +# CONFIG_AGP is not set +# CONFIG_DRM is not set +# CONFIG_RAW_DRIVER is not set + +# +# TPM devices +# +# CONFIG_TCG_TPM is not set + +# +# I2C support +# +# CONFIG_I2C is not set + +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set + +# +# Dallas's 1-wire bus +# +# CONFIG_W1 is not set + +# +# Hardware Monitoring support +# +# CONFIG_HWMON is not set +# CONFIG_HWMON_VID is not set + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set + +# +# Digital Video Broadcasting Devices +# +# CONFIG_DVB is not set + +# +# Graphics support +# +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Sound +# +# CONFIG_SOUND is not set + +# +# USB support +# +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARCH_HAS_EHCI=y +# CONFIG_USB is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set + +# +# MMC/SD Card support +# +# CONFIG_MMC is not set + +# +# LED devices +# +# CONFIG_NEW_LEDS is not set + +# +# LED drivers +# + +# +# LED Triggers +# + +# +# InfiniBand support +# +# CONFIG_INFINIBAND is not set + +# +# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) +# + +# +# Real Time Clock +# +# CONFIG_RTC_CLASS is not set + +# +# DMA Engine support +# +# CONFIG_DMA_ENGINE is not set + +# +# DMA Clients +# + +# +# DMA Devices +# + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +CONFIG_EXT3_FS_XATTR=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +# CONFIG_EXT3_FS_SECURITY is not set +# CONFIG_EXT4DEV_FS is not set +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +# CONFIG_NFS_FS is not set +# CONFIG_NFSD is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y + +# +# Native Language Support +# +# CONFIG_NLS is not set + +# +# Library routines +# +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +# CONFIG_CRC32 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_PLIST=y + +# +# Instrumentation Support +# +# CONFIG_PROFILING is not set + +# +# Kernel hacking +# +CONFIG_PRINTK_TIME=y +CONFIG_ENABLE_MUST_CHECK=y +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +CONFIG_DEBUG_KERNEL=y +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_RWSEMS is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +CONFIG_DEBUG_INFO=y +# CONFIG_DEBUG_FS is not set +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_LIST is not set +CONFIG_FORCED_INLINING=y +# CONFIG_HEADERS_CHECK is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_DEBUGGER is not set +# CONFIG_BDI_SWITCH is not set +# CONFIG_BOOTX_TEXT is not set +# CONFIG_SERIAL_TEXT_DEBUG is not set +# CONFIG_PPC_EARLY_DEBUG is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set + +# +# Cryptographic options +# +# CONFIG_CRYPTO is not set -- cgit v1.2.3-70-g09d2 From 4468f01dc7cfd1998845cd66a0cdb1f3ef9740f0 Mon Sep 17 00:00:00 2001 From: Olof Johansson Date: Mon, 27 Nov 2006 21:21:29 -0600 Subject: [POWERPC] Fix OF pci flags parsing For PCI devices with only io ports, of_bus_pci_get_flags() will fall through and still mark the resource as IORESOURCE_MEM. Signed-off-by: Olof Johansson Acked-by: Benjamin Herrenschmidt Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/prom_parse.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch/powerpc') diff --git a/arch/powerpc/kernel/prom_parse.c b/arch/powerpc/kernel/prom_parse.c index 346fb7bf9a0..0dfbe1cd28e 100644 --- a/arch/powerpc/kernel/prom_parse.c +++ b/arch/powerpc/kernel/prom_parse.c @@ -160,9 +160,11 @@ static unsigned int of_bus_pci_get_flags(const u32 *addr) switch((w >> 24) & 0x03) { case 0x01: flags |= IORESOURCE_IO; + break; case 0x02: /* 32 bits */ case 0x03: /* 64 bits */ flags |= IORESOURCE_MEM; + break; } if (w & 0x40000000) flags |= IORESOURCE_PREFETCH; -- cgit v1.2.3-70-g09d2 From dc0f80aa6a6c128cf90adefb5b7deddfb56d937b Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Tue, 28 Nov 2006 12:31:53 +0100 Subject: [POWERPC] Clean images in arch/powerpc/boot Add a rule to clean up the various generated image files in arch/powerpc/boot. Signed-off-by: Geert Uytterhoeven Signed-off-by: Paul Mackerras --- arch/powerpc/boot/Makefile | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/powerpc') diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile index b320562c03b..4a831ae95a9 100644 --- a/arch/powerpc/boot/Makefile +++ b/arch/powerpc/boot/Makefile @@ -179,3 +179,4 @@ install: $(CONFIGURE) $(image-y) clean-files += $(addprefix $(objtree)/, $(obj-boot) vmlinux.strip.gz) clean-files += $(addprefix $(objtree)/, $(obj-boot) vmlinux.bin.gz) +clean-files += $(image-) -- cgit v1.2.3-70-g09d2 From 0efbc18a753f7d6dbe832e014bc80e2b4c12bece Mon Sep 17 00:00:00 2001 From: Paul Mackerras Date: Wed, 29 Nov 2006 22:31:47 +1100 Subject: [POWERPC] Tell firmware we can handle POWER6 compatible mode This adds the "logical" PVR value used by POWER6 in "compatible" mode to the list of PVR values that the kernel tells firmware it is able to handle. Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/prom_init.c | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/powerpc') diff --git a/arch/powerpc/kernel/prom_init.c b/arch/powerpc/kernel/prom_init.c index 396109a537c..46cf32670dd 100644 --- a/arch/powerpc/kernel/prom_init.c +++ b/arch/powerpc/kernel/prom_init.c @@ -643,6 +643,7 @@ static void __init early_cmdline_parse(void) static unsigned char ibm_architecture_vec[] = { W(0xfffe0000), W(0x003a0000), /* POWER5/POWER5+ */ W(0xffff0000), W(0x003e0000), /* POWER6 */ + W(0xffffffff), W(0x0f000002), /* all 2.05-compliant */ W(0xfffffffe), W(0x0f000001), /* all 2.04-compliant and earlier */ 5 - 1, /* 5 option vectors */ -- cgit v1.2.3-70-g09d2 From ec59cf710bcf638a895f2ad90cafb1493b95953e Mon Sep 17 00:00:00 2001 From: Linas Vepstas Date: Wed, 29 Nov 2006 12:05:22 -0600 Subject: [POWERPC] Change ppc64_defconfig to use AUTOFS_V4 not V3 Defconfig ppc64 kernels running under late-model distros may hang in the automounter rc.d script, which seems to be expecting autofs version 4. This patch uses the newer autofs. Signed-off-by: Linas Vepstas Signed-off-by: Paul Mackerras --- arch/powerpc/configs/ppc64_defconfig | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/configs/ppc64_defconfig b/arch/powerpc/configs/ppc64_defconfig index be11df7c11a..1c009651f92 100644 --- a/arch/powerpc/configs/ppc64_defconfig +++ b/arch/powerpc/configs/ppc64_defconfig @@ -1386,8 +1386,8 @@ CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set CONFIG_DNOTIFY=y -CONFIG_AUTOFS_FS=y -# CONFIG_AUTOFS4_FS is not set +# CONFIG_AUTOFS_FS is not set +CONFIG_AUTOFS4_FS=m # CONFIG_FUSE_FS is not set # -- cgit v1.2.3-70-g09d2 From bbb681779012fae778c0a53081bbb19cf43bca4e Mon Sep 17 00:00:00 2001 From: Stephen Rothwell Date: Thu, 30 Nov 2006 11:44:09 +1100 Subject: [POWERPC] Allow xmon to build on legacy iSeries xmon still does not run on iSeries, but this allows us to build a combined kernel that includes it. Signed-off-by: Stephen Rothwell Signed-off-by: Paul Mackerras --- arch/powerpc/Kconfig.debug | 2 +- arch/powerpc/xmon/xmon.c | 9 +++++++++ 2 files changed, 10 insertions(+), 1 deletion(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/Kconfig.debug b/arch/powerpc/Kconfig.debug index ff16063d67f..5cce9048ce0 100644 --- a/arch/powerpc/Kconfig.debug +++ b/arch/powerpc/Kconfig.debug @@ -77,7 +77,7 @@ config KGDB_CONSOLE config XMON bool "Include xmon kernel debugger" - depends on DEBUGGER && !PPC_ISERIES + depends on DEBUGGER help Include in-kernel hooks for the xmon kernel monitor/debugger. Unless you are intending to debug the kernel, say N here. diff --git a/arch/powerpc/xmon/xmon.c b/arch/powerpc/xmon/xmon.c index dc8a3760a98..a34ed49e035 100644 --- a/arch/powerpc/xmon/xmon.c +++ b/arch/powerpc/xmon/xmon.c @@ -44,6 +44,7 @@ #ifdef CONFIG_PPC64 #include #include +#include #endif #include "nonstdio.h" @@ -2580,6 +2581,10 @@ void dump_segments(void) void xmon_init(int enable) { +#ifdef CONFIG_PPC_ISERIES + if (firmware_has_feature(FW_FEATURE_ISERIES)) + return; +#endif if (enable) { __debugger = xmon; __debugger_ipi = xmon_ipi; @@ -2617,6 +2622,10 @@ static struct sysrq_key_op sysrq_xmon_op = static int __init setup_xmon_sysrq(void) { +#ifdef CONFIG_PPC_ISERIES + if (firmware_has_feature(FW_FEATURE_ISERIES)) + return 0; +#endif register_sysrq_key('x', &sysrq_xmon_op); return 0; } -- cgit v1.2.3-70-g09d2 From 80814be40e1f0e7e6fc00fdfe0af16268670e0b4 Mon Sep 17 00:00:00 2001 From: Stephen Rothwell Date: Thu, 30 Nov 2006 11:45:14 +1100 Subject: [POWERPC] Allow CONFIG_BOOTX_TEXT on iSeries and therefore combined builds. Signed-off-by: Stephen Rothwell Signed-off-by: Paul Mackerras --- arch/powerpc/Kconfig.debug | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/Kconfig.debug b/arch/powerpc/Kconfig.debug index 5cce9048ce0..f0e51edde02 100644 --- a/arch/powerpc/Kconfig.debug +++ b/arch/powerpc/Kconfig.debug @@ -125,7 +125,7 @@ config BDI_SWITCH config BOOTX_TEXT bool "Support for early boot text console (BootX or OpenFirmware only)" - depends PPC_OF && !PPC_ISERIES + depends PPC_OF help Say Y here to see progress messages from the boot firmware in text mode. Requires either BootX or Open Firmware. -- cgit v1.2.3-70-g09d2 From 0470466dbafd1db0815bb884d26a6be431e19f96 Mon Sep 17 00:00:00 2001 From: Stephen Rothwell Date: Thu, 30 Nov 2006 11:46:22 +1100 Subject: [POWERPC] Fix cputable.h for combined build Remove CPU_FTR_16M_PAGE from the cupfeatures mask at runtime on iSeries. Signed-off-by: Stephen Rothwell Signed-off-by: Paul Mackerras --- arch/powerpc/mm/hash_utils_64.c | 2 +- arch/powerpc/platforms/iseries/setup.c | 2 ++ include/asm-powerpc/cputable.h | 13 +++---------- 3 files changed, 6 insertions(+), 11 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/mm/hash_utils_64.c b/arch/powerpc/mm/hash_utils_64.c index 1915661c2c8..c0d2a694fa3 100644 --- a/arch/powerpc/mm/hash_utils_64.c +++ b/arch/powerpc/mm/hash_utils_64.c @@ -277,7 +277,7 @@ static void __init htab_init_page_sizes(void) * Not in the device-tree, let's fallback on known size * list for 16M capable GP & GR */ - if (cpu_has_feature(CPU_FTR_16M_PAGE) && !machine_is(iseries)) + if (cpu_has_feature(CPU_FTR_16M_PAGE)) memcpy(mmu_psize_defs, mmu_psize_defaults_gp, sizeof(mmu_psize_defaults_gp)); found: diff --git a/arch/powerpc/platforms/iseries/setup.c b/arch/powerpc/platforms/iseries/setup.c index 1796644ec7d..bdf2afbb60c 100644 --- a/arch/powerpc/platforms/iseries/setup.c +++ b/arch/powerpc/platforms/iseries/setup.c @@ -643,6 +643,8 @@ static int __init iseries_probe(void) return 0; hpte_init_iSeries(); + /* iSeries does not support 16M pages */ + cur_cpu_spec->cpu_features &= ~CPU_FTR_16M_PAGE; return 1; } diff --git a/include/asm-powerpc/cputable.h b/include/asm-powerpc/cputable.h index 354f66da9dc..6fe5c9d4ca3 100644 --- a/include/asm-powerpc/cputable.h +++ b/include/asm-powerpc/cputable.h @@ -155,16 +155,9 @@ extern void do_feature_fixups(unsigned long value, void *fixup_start, #ifndef __ASSEMBLY__ -#define CPU_FTR_PPCAS_ARCH_V2_BASE (CPU_FTR_SLB | \ - CPU_FTR_TLBIEL | CPU_FTR_NOEXECUTE | \ - CPU_FTR_NODSISRALIGN) - -/* iSeries doesn't support large pages */ -#ifdef CONFIG_PPC_ISERIES -#define CPU_FTR_PPCAS_ARCH_V2 (CPU_FTR_PPCAS_ARCH_V2_BASE) -#else -#define CPU_FTR_PPCAS_ARCH_V2 (CPU_FTR_PPCAS_ARCH_V2_BASE | CPU_FTR_16M_PAGE) -#endif /* CONFIG_PPC_ISERIES */ +#define CPU_FTR_PPCAS_ARCH_V2 (CPU_FTR_SLB | \ + CPU_FTR_TLBIEL | CPU_FTR_NOEXECUTE | \ + CPU_FTR_NODSISRALIGN | CPU_FTR_16M_PAGE) /* We only set the altivec features if the kernel was compiled with altivec * support -- cgit v1.2.3-70-g09d2 From 4eab0e65bd3c9d3065f54e7477fec79c5e939ed6 Mon Sep 17 00:00:00 2001 From: Stephen Rothwell Date: Thu, 30 Nov 2006 16:53:11 +1100 Subject: [POWERPC] iSeries: stop dt_mod.o being rebuilt unnecessarily Signed-off-by: Stephen Rothwell Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/iseries/Makefile | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/platforms/iseries/Makefile b/arch/powerpc/platforms/iseries/Makefile index dee4eb4d8be..13ac3015d91 100644 --- a/arch/powerpc/platforms/iseries/Makefile +++ b/arch/powerpc/platforms/iseries/Makefile @@ -1,5 +1,7 @@ EXTRA_CFLAGS += -mno-minimal-toc +extra-y += dt.o + obj-y += hvlog.o hvlpconfig.o lpardata.o setup.o dt_mod.o mf.o lpevents.o \ hvcall.o proc.o htab.o iommu.o misc.o irq.o obj-$(CONFIG_PCI) += pci.o vpdinfo.o @@ -7,5 +9,9 @@ obj-$(CONFIG_SMP) += smp.o obj-$(CONFIG_VIOPATH) += viopath.o obj-$(CONFIG_MODULES) += ksyms.o +quiet_cmd_dt_strings = DT_STR $@ + cmd_dt_strings = $(OBJCOPY) --rename-section .rodata.str1.8=.dt_strings \ + $< $@ + $(obj)/dt_mod.o: $(obj)/dt.o - @$(OBJCOPY) --rename-section .rodata.str1.8=.dt_strings $(obj)/dt.o $(obj)/dt_mod.o + $(call if_changed,dt_strings) -- cgit v1.2.3-70-g09d2 From e73aedba562d1e7777287043afb8e46131ed402e Mon Sep 17 00:00:00 2001 From: Stephen Rothwell Date: Thu, 30 Nov 2006 16:55:04 +1100 Subject: [POWERPC] iSeries: don't build head_64.o unnecessarily Signed-off-by: Stephen Rothwell Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile index f9ce5d798de..4fe53d08ab8 100644 --- a/arch/powerpc/kernel/Makefile +++ b/arch/powerpc/kernel/Makefile @@ -76,7 +76,7 @@ obj-y += iomap.o endif ifeq ($(CONFIG_PPC_ISERIES),y) -$(obj)/head_64.o: $(obj)/lparmap.s +extra-y += lparmap.s AFLAGS_head_64.o += -I$(obj) endif -- cgit v1.2.3-70-g09d2 From 57933f8fbedba686659b947659418734615611e9 Mon Sep 17 00:00:00 2001 From: Scott Wood Date: Fri, 1 Dec 2006 12:57:05 -0600 Subject: [POWERPC] Add the e300c3 core to the CPU table. This core is used in Freescale's 831x chips. Signed-off-by: Scott Wood Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/cputable.c | 11 +++++++++++ 1 file changed, 11 insertions(+) (limited to 'arch/powerpc') diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c index 0b01faa3e7e..9d1614c3ce6 100644 --- a/arch/powerpc/kernel/cputable.c +++ b/arch/powerpc/kernel/cputable.c @@ -840,6 +840,17 @@ static struct cpu_spec cpu_specs[] = { .cpu_setup = __setup_cpu_603, .platform = "ppc603", }, + { /* e300c3 on 83xx */ + .pvr_mask = 0x7fff0000, + .pvr_value = 0x00850000, + .cpu_name = "e300c3", + .cpu_features = CPU_FTRS_E300, + .cpu_user_features = COMMON_USER, + .icache_bsize = 32, + .dcache_bsize = 32, + .cpu_setup = __setup_cpu_603, + .platform = "ppc603", + }, { /* default match, we assume split I/D cache & TB (non-601)... */ .pvr_mask = 0x00000000, .pvr_value = 0x00000000, -- cgit v1.2.3-70-g09d2 From 04d76b937bdf60a8c9ac34e222e3ca977ab9ddc8 Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Fri, 1 Dec 2006 22:53:48 +0100 Subject: [POWERPC] Linkstation / kurobox support Support for the Kurobox(HG)/LinkStation-I NAS systems by Buffalo Technology, should be also applicable to the PPC TeraStation family. Signed-off-by: Guennadi Liakhovetski Signed-off-by: Kumar Gala Signed-off-by: Paul Mackerras --- arch/powerpc/boot/dts/kuroboxHG.dts | 148 ++ arch/powerpc/configs/linkstation_defconfig | 1583 ++++++++++++++++++++++ arch/powerpc/platforms/embedded6xx/Kconfig | 18 +- arch/powerpc/platforms/embedded6xx/Makefile | 1 + arch/powerpc/platforms/embedded6xx/linkstation.c | 211 +++ arch/powerpc/platforms/embedded6xx/ls_uart.c | 131 ++ 6 files changed, 2089 insertions(+), 3 deletions(-) create mode 100644 arch/powerpc/boot/dts/kuroboxHG.dts create mode 100644 arch/powerpc/configs/linkstation_defconfig create mode 100644 arch/powerpc/platforms/embedded6xx/linkstation.c create mode 100644 arch/powerpc/platforms/embedded6xx/ls_uart.c (limited to 'arch/powerpc') diff --git a/arch/powerpc/boot/dts/kuroboxHG.dts b/arch/powerpc/boot/dts/kuroboxHG.dts new file mode 100644 index 00000000000..d06b0b01889 --- /dev/null +++ b/arch/powerpc/boot/dts/kuroboxHG.dts @@ -0,0 +1,148 @@ +/* + * Device Tree Souce for Buffalo KuroboxHG + * + * Choose CONFIG_LINKSTATION to build a kernel for KuroboxHG, or use + * the default configuration linkstation_defconfig. + * + * Based on sandpoint.dts + * + * 2006 (c) G. Liakhovetski + * + * This file is licensed under + * the terms of the GNU General Public License version 2. This program + * is licensed "as is" without any warranty of any kind, whether express + * or implied. + +XXXX add flash parts, rtc, ?? + +build with: "dtc -f -I dts -O dtb -o kuroboxHG.dtb -V 16 kuroboxHG.dts" + + + */ + +/ { + linux,phandle = <1000>; + model = "KuroboxHG"; + compatible = "linkstation"; + #address-cells = <1>; + #size-cells = <1>; + + cpus { + linux,phandle = <2000>; + #cpus = <1>; + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,603e { /* Really 8241 */ + linux,phandle = <2100>; + linux,boot-cpu; + device_type = "cpu"; + reg = <0>; + clock-frequency = ; /* Fixed by bootwrapper */ + timebase-frequency = <1F04000>; /* Fixed by bootwrapper */ + bus-frequency = <0>; /* From bootloader */ + /* Following required by dtc but not used */ + i-cache-line-size = <0>; + d-cache-line-size = <0>; + i-cache-size = <4000>; + d-cache-size = <4000>; + }; + }; + + memory { + linux,phandle = <3000>; + device_type = "memory"; + reg = <00000000 08000000>; + }; + + soc10x { /* AFAICT need to make soc for 8245's uarts to be defined */ + linux,phandle = <4000>; + #address-cells = <1>; + #size-cells = <1>; + #interrupt-cells = <2>; + device_type = "soc"; + compatible = "mpc10x"; + store-gathering = <0>; /* 0 == off, !0 == on */ + reg = <80000000 00100000>; + ranges = <80000000 80000000 70000000 /* pci mem space */ + fc000000 fc000000 00100000 /* EUMB */ + fe000000 fe000000 00c00000 /* pci i/o space */ + fec00000 fec00000 00300000 /* pci cfg regs */ + fef00000 fef00000 00100000>; /* pci iack */ + + i2c@80003000 { + linux,phandle = <4300>; + device_type = "i2c"; + compatible = "fsl-i2c"; + reg = <80003000 1000>; + interrupts = <5 2>; + interrupt-parent = <4400>; + }; + + serial@80004500 { + linux,phandle = <4511>; + device_type = "serial"; + compatible = "ns16550"; + reg = <80004500 8>; + clock-frequency = <7c044a8>; + current-speed = <2580>; + interrupts = <9 2>; + interrupt-parent = <4400>; + }; + + serial@80004600 { + linux,phandle = <4512>; + device_type = "serial"; + compatible = "ns16550"; + reg = <80004600 8>; + clock-frequency = <7c044a8>; + current-speed = ; + interrupts = ; + interrupt-parent = <4400>; + }; + + pic@80040000 { + linux,phandle = <4400>; + #interrupt-cells = <2>; + #address-cells = <0>; + device_type = "open-pic"; + compatible = "chrp,open-pic"; + interrupt-controller; + reg = <80040000 40000>; + built-in; + }; + + pci@fec00000 { + linux,phandle = <4500>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + device_type = "pci"; + compatible = "mpc10x-pci"; + reg = ; + ranges = <01000000 0 0 fe000000 0 00c00000 + 02000000 0 80000000 80000000 0 70000000>; + bus-range = <0 ff>; + clock-frequency = <7f28155>; + interrupt-parent = <4400>; + interrupt-map-mask = ; + interrupt-map = < + /* IDSEL 0x11 - IRQ0 ETH */ + 5800 0 0 1 4400 0 1 + 5800 0 0 2 4400 1 1 + 5800 0 0 3 4400 2 1 + 5800 0 0 4 4400 3 1 + /* IDSEL 0x12 - IRQ1 IDE0 */ + 6000 0 0 1 4400 1 1 + 6000 0 0 2 4400 2 1 + 6000 0 0 3 4400 3 1 + 6000 0 0 4 4400 0 1 + /* IDSEL 0x14 - IRQ3 USB2.0 */ + 7000 0 0 1 4400 3 1 + 7000 0 0 2 4400 3 1 + 7000 0 0 3 4400 3 1 + 7000 0 0 4 4400 3 1 + >; + }; + }; +}; diff --git a/arch/powerpc/configs/linkstation_defconfig b/arch/powerpc/configs/linkstation_defconfig new file mode 100644 index 00000000000..23fd210eb56 --- /dev/null +++ b/arch/powerpc/configs/linkstation_defconfig @@ -0,0 +1,1583 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.19-rc4 +# Wed Nov 15 20:36:30 2006 +# +# CONFIG_PPC64 is not set +CONFIG_PPC32=y +CONFIG_PPC_MERGE=y +CONFIG_MMU=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_IRQ_PER_CPU=y +CONFIG_RWSEM_XCHGADD_ALGORITHM=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_PPC=y +CONFIG_EARLY_PRINTK=y +CONFIG_GENERIC_NVRAM=y +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_ARCH_MAY_HAVE_PC_FDC=y +CONFIG_PPC_OF=y +CONFIG_PPC_UDBG_16550=y +# CONFIG_GENERIC_TBSYNC is not set +CONFIG_AUDIT_ARCH=y +# CONFIG_DEFAULT_UIMAGE is not set + +# +# Processor support +# +CONFIG_CLASSIC32=y +# CONFIG_PPC_52xx is not set +# CONFIG_PPC_82xx is not set +# CONFIG_PPC_83xx is not set +# CONFIG_PPC_85xx is not set +# CONFIG_PPC_86xx is not set +# CONFIG_40x is not set +# CONFIG_44x is not set +# CONFIG_8xx is not set +# CONFIG_E200 is not set +CONFIG_6xx=y +CONFIG_PPC_FPU=y +# CONFIG_PPC_DCR_NATIVE is not set +# CONFIG_PPC_DCR_MMIO is not set +# CONFIG_ALTIVEC is not set +CONFIG_PPC_STD_MMU=y +CONFIG_PPC_STD_MMU_32=y +# CONFIG_SMP is not set +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 + +# +# General setup +# +CONFIG_LOCALVERSION="-kuroboxHG" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +# CONFIG_IPC_NS is not set +CONFIG_POSIX_MQUEUE=y +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_UTS_NS is not set +# CONFIG_AUDIT is not set +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +# CONFIG_RELAY is not set +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y +# CONFIG_EMBEDDED is not set +# CONFIG_SYSCTL_SYSCALL is not set +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SHMEM=y +CONFIG_SLAB=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +# CONFIG_SLOB is not set + +# +# Loadable module support +# +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y + +# +# Block layer +# +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + +# +# Platform support +# +# CONFIG_PPC_MULTIPLATFORM is not set +CONFIG_EMBEDDED6xx=y +# CONFIG_APUS is not set +# CONFIG_PPC_CELL is not set +# CONFIG_PPC_CELL_NATIVE is not set +# CONFIG_PPC_RTAS is not set +# CONFIG_MMIO_NVRAM is not set +# CONFIG_PPC_MPC106 is not set +# CONFIG_PPC_970_NAP is not set +# CONFIG_PPC_INDIRECT_IO is not set +# CONFIG_GENERIC_IOMAP is not set +# CONFIG_CPU_FREQ is not set +# CONFIG_TAU is not set +# CONFIG_KATANA is not set +# CONFIG_WILLOW is not set +# CONFIG_CPCI690 is not set +# CONFIG_POWERPMC250 is not set +# CONFIG_CHESTNUT is not set +# CONFIG_SPRUCE is not set +# CONFIG_HDPU is not set +# CONFIG_EV64260 is not set +# CONFIG_LOPEC is not set +# CONFIG_MVME5100 is not set +# CONFIG_PPLUS is not set +# CONFIG_PRPMC750 is not set +# CONFIG_PRPMC800 is not set +# CONFIG_SANDPOINT is not set +CONFIG_LINKSTATION=y +# CONFIG_MPC7448HPC2 is not set +# CONFIG_RADSTONE_PPC7D is not set +# CONFIG_PAL4 is not set +# CONFIG_GEMINI is not set +# CONFIG_EST8260 is not set +# CONFIG_SBC82xx is not set +# CONFIG_SBS8260 is not set +# CONFIG_RPX8260 is not set +# CONFIG_TQM8260 is not set +# CONFIG_ADS8272 is not set +# CONFIG_PQ2FADS is not set +# CONFIG_LITE5200 is not set +# CONFIG_EV64360 is not set +CONFIG_PPC_GEN550=y +CONFIG_MPC10X_BRIDGE=y +CONFIG_MPC10X_OPENPIC=y +# CONFIG_MPC10X_STORE_GATHERING is not set +# CONFIG_WANT_EARLY_SERIAL is not set +CONFIG_MPIC=y + +# +# Kernel options +# +# CONFIG_HIGHMEM is not set +CONFIG_HZ_100=y +# CONFIG_HZ_250 is not set +# CONFIG_HZ_1000 is not set +CONFIG_HZ=100 +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_MISC is not set +CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_POPULATES_NODE_MAP=y +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_PROC_DEVICETREE=y +# CONFIG_CMDLINE_BOOL is not set +# CONFIG_PM is not set +# CONFIG_SECCOMP is not set +CONFIG_ISA_DMA_API=y + +# +# Bus options +# +CONFIG_GENERIC_ISA_DMA=y +# CONFIG_MPIC_WEIRD is not set +# CONFIG_PPC_I8259 is not set +CONFIG_PPC_INDIRECT_PCI=y +CONFIG_FSL_SOC=y +CONFIG_PCI=y +CONFIG_PCI_DOMAINS=y +# CONFIG_PCIEPORTBUS is not set +# CONFIG_PCI_MULTITHREAD_PROBE is not set +# CONFIG_PCI_DEBUG is not set + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set + +# +# PCI Hotplug Support +# +# CONFIG_HOTPLUG_PCI is not set + +# +# Advanced setup +# +# CONFIG_ADVANCED_OPTIONS is not set + +# +# Default settings for advanced configuration options are used +# +CONFIG_HIGHMEM_START=0xfe000000 +CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_KERNEL_START=0xc0000000 +CONFIG_TASK_SIZE=0x80000000 +CONFIG_BOOT_LOAD=0x00800000 + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +# CONFIG_NETDEBUG is not set +CONFIG_PACKET=y +CONFIG_PACKET_MMAP=y +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_IP_MROUTE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" + +# +# IP: Virtual Server Configuration +# +# CONFIG_IP_VS is not set +# CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_NETWORK_SECMARK is not set +CONFIG_NETFILTER=y +# CONFIG_NETFILTER_DEBUG is not set + +# +# Core Netfilter Configuration +# +# CONFIG_NETFILTER_NETLINK is not set +CONFIG_NETFILTER_XTABLES=m +CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m +# CONFIG_NETFILTER_XT_TARGET_DSCP is not set +CONFIG_NETFILTER_XT_TARGET_MARK=m +# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set +# CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set +# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set +CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m +# CONFIG_NETFILTER_XT_MATCH_DCCP is not set +# CONFIG_NETFILTER_XT_MATCH_DSCP is not set +CONFIG_NETFILTER_XT_MATCH_ESP=m +# CONFIG_NETFILTER_XT_MATCH_HELPER is not set +CONFIG_NETFILTER_XT_MATCH_LENGTH=m +CONFIG_NETFILTER_XT_MATCH_LIMIT=m +CONFIG_NETFILTER_XT_MATCH_MAC=m +CONFIG_NETFILTER_XT_MATCH_MARK=m +# CONFIG_NETFILTER_XT_MATCH_POLICY is not set +CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m +CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m +# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set +# CONFIG_NETFILTER_XT_MATCH_REALM is not set +# CONFIG_NETFILTER_XT_MATCH_SCTP is not set +CONFIG_NETFILTER_XT_MATCH_STATE=m +# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set +# CONFIG_NETFILTER_XT_MATCH_STRING is not set +# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set + +# +# IP: Netfilter Configuration +# +CONFIG_IP_NF_CONNTRACK=m +# CONFIG_IP_NF_CT_ACCT is not set +# CONFIG_IP_NF_CONNTRACK_MARK is not set +# CONFIG_IP_NF_CONNTRACK_EVENTS is not set +# CONFIG_IP_NF_CT_PROTO_SCTP is not set +CONFIG_IP_NF_FTP=m +CONFIG_IP_NF_IRC=m +# CONFIG_IP_NF_NETBIOS_NS is not set +CONFIG_IP_NF_TFTP=m +# CONFIG_IP_NF_AMANDA is not set +# CONFIG_IP_NF_PPTP is not set +# CONFIG_IP_NF_H323 is not set +# CONFIG_IP_NF_SIP is not set +# CONFIG_IP_NF_QUEUE is not set +CONFIG_IP_NF_IPTABLES=m +CONFIG_IP_NF_MATCH_IPRANGE=m +# CONFIG_IP_NF_MATCH_TOS is not set +# CONFIG_IP_NF_MATCH_RECENT is not set +# CONFIG_IP_NF_MATCH_ECN is not set +# CONFIG_IP_NF_MATCH_AH is not set +# CONFIG_IP_NF_MATCH_TTL is not set +# CONFIG_IP_NF_MATCH_OWNER is not set +# CONFIG_IP_NF_MATCH_ADDRTYPE is not set +# CONFIG_IP_NF_MATCH_HASHLIMIT is not set +CONFIG_IP_NF_FILTER=m +CONFIG_IP_NF_TARGET_REJECT=m +# CONFIG_IP_NF_TARGET_LOG is not set +# CONFIG_IP_NF_TARGET_ULOG is not set +# CONFIG_IP_NF_TARGET_TCPMSS is not set +CONFIG_IP_NF_NAT=m +CONFIG_IP_NF_NAT_NEEDED=y +CONFIG_IP_NF_TARGET_MASQUERADE=m +CONFIG_IP_NF_TARGET_REDIRECT=m +CONFIG_IP_NF_TARGET_NETMAP=m +CONFIG_IP_NF_TARGET_SAME=m +# CONFIG_IP_NF_NAT_SNMP_BASIC is not set +CONFIG_IP_NF_NAT_IRC=m +CONFIG_IP_NF_NAT_FTP=m +CONFIG_IP_NF_NAT_TFTP=m +CONFIG_IP_NF_MANGLE=m +CONFIG_IP_NF_TARGET_TOS=m +CONFIG_IP_NF_TARGET_ECN=m +CONFIG_IP_NF_TARGET_TTL=m +CONFIG_IP_NF_RAW=m +CONFIG_IP_NF_ARPTABLES=m +CONFIG_IP_NF_ARPFILTER=m +CONFIG_IP_NF_ARP_MANGLE=m + +# +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +CONFIG_IEEE80211=m +CONFIG_IEEE80211_DEBUG=y +CONFIG_IEEE80211_CRYPT_WEP=m +CONFIG_IEEE80211_CRYPT_CCMP=m +CONFIG_IEEE80211_CRYPT_TKIP=m +CONFIG_IEEE80211_SOFTMAC=m +CONFIG_IEEE80211_SOFTMAC_DEBUG=y +CONFIG_WIRELESS_EXT=y + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=m +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_SYS_HYPERVISOR is not set + +# +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set + +# +# Memory Technology Devices (MTD) +# +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +CONFIG_MTD_CONCAT=y +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +# CONFIG_MTD_CMDLINE_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +CONFIG_MTD_JEDECPROBE=y +CONFIG_MTD_GEN_PROBE=y +CONFIG_MTD_CFI_ADV_OPTIONS=y +CONFIG_MTD_CFI_NOSWAP=y +# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set +# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set +CONFIG_MTD_CFI_GEOMETRY=y +CONFIG_MTD_MAP_BANK_WIDTH_1=y +# CONFIG_MTD_MAP_BANK_WIDTH_2 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +# CONFIG_MTD_CFI_I2 is not set +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_OTP is not set +# CONFIG_MTD_CFI_INTELEXT is not set +CONFIG_MTD_CFI_AMDSTD=y +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set +# CONFIG_MTD_OBSOLETE_CHIPS is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +CONFIG_MTD_PHYSMAP=y +CONFIG_MTD_PHYSMAP_START=0xffc00000 +CONFIG_MTD_PHYSMAP_LEN=0x400000 +CONFIG_MTD_PHYSMAP_BANKWIDTH=1 +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_PMC551 is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set + +# +# NAND Flash Device Drivers +# +# CONFIG_MTD_NAND is not set + +# +# OneNAND Flash Device Drivers +# +# CONFIG_MTD_ONENAND is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# + +# +# Block devices +# +# CONFIG_BLK_DEV_FD is not set +# CONFIG_BLK_CPQ_DA is not set +# CONFIG_BLK_CPQ_CISS_DA is not set +# CONFIG_BLK_DEV_DAC960 is not set +# CONFIG_BLK_DEV_UMEM is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_SX8 is not set +# CONFIG_BLK_DEV_UB is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=2 +CONFIG_BLK_DEV_RAM_SIZE=8192 +CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +CONFIG_BLK_DEV_INITRD=y +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set + +# +# Misc devices +# +# CONFIG_SGI_IOC4 is not set +# CONFIG_TIFM_CORE is not set + +# +# ATA/ATAPI/MFM/RLL support +# +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +CONFIG_CHR_DEV_SG=y +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +CONFIG_SCSI_MULTI_LUN=y +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set + +# +# SCSI low-level drivers +# +# CONFIG_ISCSI_TCP is not set +# CONFIG_BLK_DEV_3W_XXXX_RAID is not set +# CONFIG_SCSI_3W_9XXX is not set +# CONFIG_SCSI_ACARD is not set +# CONFIG_SCSI_AACRAID is not set +# CONFIG_SCSI_AIC7XXX is not set +# CONFIG_SCSI_AIC7XXX_OLD is not set +# CONFIG_SCSI_AIC79XX is not set +# CONFIG_SCSI_AIC94XX is not set +# CONFIG_SCSI_DPT_I2O is not set +# CONFIG_SCSI_ARCMSR is not set +# CONFIG_MEGARAID_NEWGEN is not set +# CONFIG_MEGARAID_LEGACY is not set +# CONFIG_MEGARAID_SAS is not set +# CONFIG_SCSI_HPTIOP is not set +# CONFIG_SCSI_BUSLOGIC is not set +# CONFIG_SCSI_DMX3191D is not set +# CONFIG_SCSI_EATA is not set +# CONFIG_SCSI_FUTURE_DOMAIN is not set +# CONFIG_SCSI_GDTH is not set +# CONFIG_SCSI_IPS is not set +# CONFIG_SCSI_INITIO is not set +# CONFIG_SCSI_INIA100 is not set +# CONFIG_SCSI_STEX is not set +# CONFIG_SCSI_SYM53C8XX_2 is not set +# CONFIG_SCSI_IPR is not set +# CONFIG_SCSI_QLOGIC_1280 is not set +# CONFIG_SCSI_QLA_FC is not set +# CONFIG_SCSI_QLA_ISCSI is not set +# CONFIG_SCSI_LPFC is not set +# CONFIG_SCSI_DC395x is not set +# CONFIG_SCSI_DC390T is not set +# CONFIG_SCSI_NSP32 is not set +# CONFIG_SCSI_DEBUG is not set + +# +# Serial ATA (prod) and Parallel ATA (experimental) drivers +# +CONFIG_ATA=y +# CONFIG_SATA_AHCI is not set +# CONFIG_SATA_SVW is not set +# CONFIG_ATA_PIIX is not set +# CONFIG_SATA_MV is not set +# CONFIG_SATA_NV is not set +# CONFIG_PDC_ADMA is not set +# CONFIG_SATA_QSTOR is not set +# CONFIG_SATA_PROMISE is not set +# CONFIG_SATA_SX4 is not set +# CONFIG_SATA_SIL is not set +# CONFIG_SATA_SIL24 is not set +# CONFIG_SATA_SIS is not set +# CONFIG_SATA_ULI is not set +# CONFIG_SATA_VIA is not set +# CONFIG_SATA_VITESSE is not set +# CONFIG_PATA_ALI is not set +# CONFIG_PATA_AMD is not set +# CONFIG_PATA_ARTOP is not set +# CONFIG_PATA_ATIIXP is not set +# CONFIG_PATA_CMD64X is not set +# CONFIG_PATA_CS5520 is not set +# CONFIG_PATA_CS5530 is not set +# CONFIG_PATA_CYPRESS is not set +# CONFIG_PATA_EFAR is not set +# CONFIG_ATA_GENERIC is not set +# CONFIG_PATA_HPT366 is not set +# CONFIG_PATA_HPT37X is not set +# CONFIG_PATA_HPT3X2N is not set +# CONFIG_PATA_HPT3X3 is not set +# CONFIG_PATA_IT821X is not set +# CONFIG_PATA_JMICRON is not set +# CONFIG_PATA_TRIFLEX is not set +# CONFIG_PATA_MPIIX is not set +# CONFIG_PATA_OLDPIIX is not set +# CONFIG_PATA_NETCELL is not set +# CONFIG_PATA_NS87410 is not set +# CONFIG_PATA_OPTI is not set +# CONFIG_PATA_OPTIDMA is not set +# CONFIG_PATA_PDC_OLD is not set +# CONFIG_PATA_RADISYS is not set +# CONFIG_PATA_RZ1000 is not set +# CONFIG_PATA_SC1200 is not set +# CONFIG_PATA_SERVERWORKS is not set +# CONFIG_PATA_PDC2027X is not set +CONFIG_PATA_SIL680=y +# CONFIG_PATA_SIS is not set +# CONFIG_PATA_VIA is not set +# CONFIG_PATA_WINBOND is not set + +# +# Multi-device support (RAID and LVM) +# +# CONFIG_MD is not set + +# +# Fusion MPT device support +# +# CONFIG_FUSION is not set +# CONFIG_FUSION_SPI is not set +# CONFIG_FUSION_FC is not set +# CONFIG_FUSION_SAS is not set + +# +# IEEE 1394 (FireWire) support +# +# CONFIG_IEEE1394 is not set + +# +# I2O device support +# +# CONFIG_I2O is not set + +# +# Macintosh device drivers +# +# CONFIG_WINDFARM is not set + +# +# Network device support +# +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_EQUALIZER is not set +CONFIG_TUN=m + +# +# ARCnet devices +# +# CONFIG_ARCNET is not set + +# +# PHY device support +# + +# +# Ethernet (10 or 100Mbit) +# +# CONFIG_NET_ETHERNET is not set + +# +# Ethernet (1000 Mbit) +# +# CONFIG_ACENIC is not set +# CONFIG_DL2K is not set +# CONFIG_E1000 is not set +# CONFIG_NS83820 is not set +# CONFIG_HAMACHI is not set +# CONFIG_YELLOWFIN is not set +CONFIG_R8169=y +# CONFIG_R8169_NAPI is not set +# CONFIG_SIS190 is not set +# CONFIG_SKGE is not set +# CONFIG_SKY2 is not set +# CONFIG_SK98LIN is not set +# CONFIG_TIGON3 is not set +# CONFIG_BNX2 is not set +# CONFIG_QLA3XXX is not set + +# +# Ethernet (10000 Mbit) +# +# CONFIG_CHELSIO_T1 is not set +# CONFIG_IXGB is not set +# CONFIG_S2IO is not set +# CONFIG_MYRI10GE is not set + +# +# Token Ring devices +# +# CONFIG_TR is not set + +# +# Wireless LAN (non-hamradio) +# +CONFIG_NET_RADIO=y +# CONFIG_NET_WIRELESS_RTNETLINK is not set + +# +# Obsolete Wireless cards support (pre-802.11) +# +# CONFIG_STRIP is not set + +# +# Wireless 802.11b ISA/PCI cards support +# +# CONFIG_IPW2100 is not set +# CONFIG_IPW2200 is not set +# CONFIG_AIRO is not set +# CONFIG_HERMES is not set +# CONFIG_ATMEL is not set + +# +# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support +# +# CONFIG_PRISM54 is not set +# CONFIG_USB_ZD1201 is not set +# CONFIG_HOSTAP is not set +# CONFIG_BCM43XX is not set +# CONFIG_ZD1211RW is not set +CONFIG_NET_WIRELESS=y + +# +# Wan interfaces +# +# CONFIG_WAN is not set +# CONFIG_FDDI is not set +# CONFIG_HIPPI is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_NET_FC is not set +# CONFIG_SHAPER is not set +CONFIG_NETCONSOLE=y +CONFIG_NETPOLL=y +# CONFIG_NETPOLL_RX is not set +# CONFIG_NETPOLL_TRAP is not set +CONFIG_NET_POLL_CONTROLLER=y + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Telephony Support +# +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_TSDEV is not set +CONFIG_INPUT_EVDEV=m +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +CONFIG_INPUT_MISC=y +CONFIG_INPUT_UINPUT=m + +# +# Hardware I/O ports +# +CONFIG_SERIO=y +# CONFIG_SERIO_I8042 is not set +CONFIG_SERIO_SERPORT=y +# CONFIG_SERIO_PCIPS2 is not set +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_PCI=y +CONFIG_SERIAL_8250_NR_UARTS=4 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 +# CONFIG_SERIAL_8250_EXTENDED is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set + +# +# Watchdog Cards +# +# CONFIG_WATCHDOG is not set +CONFIG_HW_RANDOM=y +# CONFIG_NVRAM is not set +# CONFIG_GEN_RTC is not set +# CONFIG_DTLK is not set +# CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set + +# +# Ftape, the floppy tape device driver +# +# CONFIG_AGP is not set +# CONFIG_DRM is not set +# CONFIG_RAW_DRIVER is not set + +# +# TPM devices +# +# CONFIG_TCG_TPM is not set + +# +# I2C support +# +CONFIG_I2C=y +CONFIG_I2C_CHARDEV=y + +# +# I2C Algorithms +# +# CONFIG_I2C_ALGOBIT is not set +# CONFIG_I2C_ALGOPCF is not set +# CONFIG_I2C_ALGOPCA is not set + +# +# I2C Hardware Bus support +# +# CONFIG_I2C_ALI1535 is not set +# CONFIG_I2C_ALI1563 is not set +# CONFIG_I2C_ALI15X3 is not set +# CONFIG_I2C_AMD756 is not set +# CONFIG_I2C_AMD8111 is not set +# CONFIG_I2C_I801 is not set +# CONFIG_I2C_I810 is not set +# CONFIG_I2C_PIIX4 is not set +CONFIG_I2C_MPC=y +# CONFIG_I2C_NFORCE2 is not set +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_PROSAVAGE is not set +# CONFIG_I2C_SAVAGE4 is not set +# CONFIG_I2C_SIS5595 is not set +# CONFIG_I2C_SIS630 is not set +# CONFIG_I2C_SIS96X is not set +# CONFIG_I2C_STUB is not set +# CONFIG_I2C_VIA is not set +# CONFIG_I2C_VIAPRO is not set +# CONFIG_I2C_VOODOO3 is not set +# CONFIG_I2C_PCA_ISA is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_SENSORS_DS1337 is not set +# CONFIG_SENSORS_DS1374 is not set +CONFIG_SENSORS_EEPROM=m +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_M41T00 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set + +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set + +# +# Dallas's 1-wire bus +# +# CONFIG_W1 is not set + +# +# Hardware Monitoring support +# +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_ABITUGURU is not set +# CONFIG_SENSORS_ADM1021 is not set +# CONFIG_SENSORS_ADM1025 is not set +# CONFIG_SENSORS_ADM1026 is not set +# CONFIG_SENSORS_ADM1031 is not set +# CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ASB100 is not set +# CONFIG_SENSORS_ATXP1 is not set +# CONFIG_SENSORS_DS1621 is not set +# CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_FSCHER is not set +# CONFIG_SENSORS_FSCPOS is not set +# CONFIG_SENSORS_GL518SM is not set +# CONFIG_SENSORS_GL520SM is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_LM63 is not set +# CONFIG_SENSORS_LM75 is not set +# CONFIG_SENSORS_LM77 is not set +# CONFIG_SENSORS_LM78 is not set +# CONFIG_SENSORS_LM80 is not set +# CONFIG_SENSORS_LM83 is not set +# CONFIG_SENSORS_LM85 is not set +# CONFIG_SENSORS_LM87 is not set +# CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set +# CONFIG_SENSORS_MAX1619 is not set +# CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_SIS5595 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47M192 is not set +# CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_VIA686A is not set +# CONFIG_SENSORS_VT1211 is not set +# CONFIG_SENSORS_VT8231 is not set +# CONFIG_SENSORS_W83781D is not set +# CONFIG_SENSORS_W83791D is not set +# CONFIG_SENSORS_W83792D is not set +# CONFIG_SENSORS_W83L785TS is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set + +# +# Digital Video Broadcasting Devices +# +# CONFIG_DVB is not set +# CONFIG_USB_DABUSB is not set + +# +# Graphics support +# +CONFIG_FIRMWARE_EDID=y +# CONFIG_FB is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Sound +# +# CONFIG_SOUND is not set + +# +# USB support +# +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARCH_HAS_EHCI=y +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set + +# +# Miscellaneous USB options +# +CONFIG_USB_DEVICEFS=y +# CONFIG_USB_BANDWIDTH is not set +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_OTG is not set + +# +# USB Host Controller Drivers +# +CONFIG_USB_EHCI_HCD=y +# CONFIG_USB_EHCI_SPLIT_ISO is not set +# CONFIG_USB_EHCI_ROOT_HUB_TT is not set +# CONFIG_USB_EHCI_TT_NEWSCHED is not set +# CONFIG_USB_ISP116X_HCD is not set +CONFIG_USB_OHCI_HCD=y +# CONFIG_USB_OHCI_BIG_ENDIAN is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +# CONFIG_USB_UHCI_HCD is not set +# CONFIG_USB_SL811_HCD is not set + +# +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# may also be needed; see USB_STORAGE Help for more information +# +CONFIG_USB_STORAGE=m +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_DPCM is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_ONETOUCH is not set +# CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Input Devices +# +# CONFIG_USB_HID is not set + +# +# USB HID Boot Protocol drivers +# +# CONFIG_USB_KBD is not set +# CONFIG_USB_MOUSE is not set +# CONFIG_USB_AIPTEK is not set +# CONFIG_USB_WACOM is not set +# CONFIG_USB_ACECAD is not set +# CONFIG_USB_KBTAB is not set +# CONFIG_USB_POWERMATE is not set +# CONFIG_USB_TOUCHSCREEN is not set +# CONFIG_USB_YEALINK is not set +# CONFIG_USB_XPAD is not set +# CONFIG_USB_ATI_REMOTE is not set +# CONFIG_USB_ATI_REMOTE2 is not set +# CONFIG_USB_KEYSPAN_REMOTE is not set +# CONFIG_USB_APPLETOUCH is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET is not set +CONFIG_USB_MON=y + +# +# USB port drivers +# + +# +# USB Serial Converter support +# +CONFIG_USB_SERIAL=y +CONFIG_USB_SERIAL_CONSOLE=y +# CONFIG_USB_SERIAL_GENERIC is not set +# CONFIG_USB_SERIAL_AIRCABLE is not set +# CONFIG_USB_SERIAL_AIRPRIME is not set +# CONFIG_USB_SERIAL_ARK3116 is not set +# CONFIG_USB_SERIAL_BELKIN is not set +# CONFIG_USB_SERIAL_WHITEHEAT is not set +# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set +# CONFIG_USB_SERIAL_CP2101 is not set +# CONFIG_USB_SERIAL_CYPRESS_M8 is not set +# CONFIG_USB_SERIAL_EMPEG is not set +CONFIG_USB_SERIAL_FTDI_SIO=y +# CONFIG_USB_SERIAL_FUNSOFT is not set +# CONFIG_USB_SERIAL_VISOR is not set +# CONFIG_USB_SERIAL_IPAQ is not set +# CONFIG_USB_SERIAL_IR is not set +# CONFIG_USB_SERIAL_EDGEPORT is not set +# CONFIG_USB_SERIAL_EDGEPORT_TI is not set +# CONFIG_USB_SERIAL_GARMIN is not set +# CONFIG_USB_SERIAL_IPW is not set +# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set +# CONFIG_USB_SERIAL_KEYSPAN is not set +# CONFIG_USB_SERIAL_KLSI is not set +# CONFIG_USB_SERIAL_KOBIL_SCT is not set +# CONFIG_USB_SERIAL_MCT_U232 is not set +# CONFIG_USB_SERIAL_MOS7720 is not set +# CONFIG_USB_SERIAL_MOS7840 is not set +# CONFIG_USB_SERIAL_NAVMAN is not set +# CONFIG_USB_SERIAL_PL2303 is not set +# CONFIG_USB_SERIAL_HP4X is not set +# CONFIG_USB_SERIAL_SAFE is not set +# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set +# CONFIG_USB_SERIAL_TI is not set +# CONFIG_USB_SERIAL_CYBERJACK is not set +# CONFIG_USB_SERIAL_XIRCOM is not set +# CONFIG_USB_SERIAL_OPTION is not set +# CONFIG_USB_SERIAL_OMNINET is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_PHIDGET is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_SISUSBVGA is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_TEST is not set + +# +# USB DSL modem support +# + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set + +# +# MMC/SD Card support +# +# CONFIG_MMC is not set + +# +# LED devices +# +# CONFIG_NEW_LEDS is not set + +# +# LED drivers +# + +# +# LED Triggers +# + +# +# InfiniBand support +# +# CONFIG_INFINIBAND is not set + +# +# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) +# + +# +# Real Time Clock +# +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set + +# +# RTC drivers +# +# CONFIG_RTC_DRV_X1205 is not set +# CONFIG_RTC_DRV_DS1307 is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_PCF8583 is not set +CONFIG_RTC_DRV_RS5C372=y +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_TEST is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# DMA Engine support +# +# CONFIG_DMA_ENGINE is not set + +# +# DMA Clients +# + +# +# DMA Devices +# + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +CONFIG_EXT3_FS_XATTR=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +# CONFIG_EXT3_FS_SECURITY is not set +# CONFIG_EXT4DEV_FS is not set +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +CONFIG_FS_POSIX_ACL=y +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +CONFIG_ISO9660_FS=m +CONFIG_JOLIET=y +CONFIG_ZISOFS=y +CONFIG_ZISOFS_FS=m +CONFIG_UDF_FS=m +CONFIG_UDF_NLS=y + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=m +CONFIG_MSDOS_FS=m +CONFIG_VFAT_FS=m +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +CONFIG_NTFS_FS=m +# CONFIG_NTFS_DEBUG is not set +# CONFIG_NTFS_RW is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_JFFS_FS is not set +# CONFIG_JFFS2_FS is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +CONFIG_NFS_V3_ACL=y +CONFIG_NFS_V4=y +# CONFIG_NFS_DIRECTIO is not set +CONFIG_NFSD=m +CONFIG_NFSD_V3=y +# CONFIG_NFSD_V3_ACL is not set +# CONFIG_NFSD_V4 is not set +CONFIG_NFSD_TCP=y +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_EXPORTFS=m +CONFIG_NFS_ACL_SUPPORT=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +CONFIG_SUNRPC_GSS=y +CONFIG_RPCSEC_GSS_KRB5=y +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y + +# +# Native Language Support +# +CONFIG_NLS=m +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=m +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +CONFIG_NLS_ISO8859_1=m +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +CONFIG_NLS_UTF8=m + +# +# Library routines +# +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +CONFIG_CRC32=y +CONFIG_LIBCRC32C=m +CONFIG_ZLIB_INFLATE=m +CONFIG_ZLIB_DEFLATE=m +CONFIG_PLIST=y + +# +# Instrumentation Support +# +CONFIG_PROFILING=y +CONFIG_OPROFILE=m + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_MAGIC_SYSRQ=y +# CONFIG_UNUSED_SYMBOLS is not set +CONFIG_DEBUG_KERNEL=y +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_RWSEMS is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +# CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_LIST is not set +CONFIG_FORCED_INLINING=y +# CONFIG_HEADERS_CHECK is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_DEBUGGER is not set +# CONFIG_BDI_SWITCH is not set +# CONFIG_BOOTX_TEXT is not set +# CONFIG_SERIAL_TEXT_DEBUG is not set +# CONFIG_PPC_EARLY_DEBUG is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set + +# +# Cryptographic options +# +CONFIG_CRYPTO=y +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_MANAGER=y +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_NULL is not set +CONFIG_CRYPTO_MD4=m +CONFIG_CRYPTO_MD5=y +CONFIG_CRYPTO_SHA1=m +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_WP512 is not set +# CONFIG_CRYPTO_TGR192 is not set +CONFIG_CRYPTO_ECB=m +CONFIG_CRYPTO_CBC=y +CONFIG_CRYPTO_DES=y +CONFIG_CRYPTO_BLOWFISH=m +CONFIG_CRYPTO_TWOFISH=m +CONFIG_CRYPTO_TWOFISH_COMMON=m +CONFIG_CRYPTO_SERPENT=m +CONFIG_CRYPTO_AES=m +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_TEA is not set +CONFIG_CRYPTO_ARC4=m +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_ANUBIS is not set +CONFIG_CRYPTO_DEFLATE=m +CONFIG_CRYPTO_MICHAEL_MIC=m +CONFIG_CRYPTO_CRC32C=m +# CONFIG_CRYPTO_TEST is not set + +# +# Hardware crypto devices +# diff --git a/arch/powerpc/platforms/embedded6xx/Kconfig b/arch/powerpc/platforms/embedded6xx/Kconfig index 910d50a8333..ddbe398fbd4 100644 --- a/arch/powerpc/platforms/embedded6xx/Kconfig +++ b/arch/powerpc/platforms/embedded6xx/Kconfig @@ -74,6 +74,18 @@ config SANDPOINT Select SANDPOINT if configuring for a Motorola Sandpoint X3 (any flavor). +config LINKSTATION + bool "Linkstation / Kurobox(HG) from Buffalo" + select MPIC + select FSL_SOC + select PPC_UDBG_16550 if SERIAL_8250 + help + Select LINKSTATION if configuring for one of PPC- (MPC8241) + based NAS systems from Buffalo Technology. So far only + KuroboxHG has been tested. In the future classical Kurobox, + Linkstation-I HD-HLAN and HD-HGLAN versions, and PPC-based + Terastation systems should be supported too. + config MPC7448HPC2 bool "Freescale MPC7448HPC2(Taiga)" select TSI108_BRIDGE @@ -196,7 +208,7 @@ config PPC_GEN550 depends on SANDPOINT || SPRUCE || PPLUS || \ PRPMC750 || PRPMC800 || LOPEC || \ (EV64260 && !SERIAL_MPSC) || CHESTNUT || RADSTONE_PPC7D || \ - 83xx + 83xx || LINKSTATION default y config FORCE @@ -270,13 +282,13 @@ config EPIC_SERIAL_MODE config MPC10X_BRIDGE bool - depends on POWERPMC250 || LOPEC || SANDPOINT + depends on POWERPMC250 || LOPEC || SANDPOINT || LINKSTATION select PPC_INDIRECT_PCI default y config MPC10X_OPENPIC bool - depends on POWERPMC250 || LOPEC || SANDPOINT + depends on POWERPMC250 || LOPEC || SANDPOINT || LINKSTATION default y config MPC10X_STORE_GATHERING diff --git a/arch/powerpc/platforms/embedded6xx/Makefile b/arch/powerpc/platforms/embedded6xx/Makefile index fa499fe5929..d3d11a3cd65 100644 --- a/arch/powerpc/platforms/embedded6xx/Makefile +++ b/arch/powerpc/platforms/embedded6xx/Makefile @@ -2,3 +2,4 @@ # Makefile for the 6xx/7xx/7xxxx linux kernel. # obj-$(CONFIG_MPC7448HPC2) += mpc7448_hpc2.o +obj-$(CONFIG_LINKSTATION) += linkstation.o ls_uart.o diff --git a/arch/powerpc/platforms/embedded6xx/linkstation.c b/arch/powerpc/platforms/embedded6xx/linkstation.c new file mode 100644 index 00000000000..61599d919ea --- /dev/null +++ b/arch/powerpc/platforms/embedded6xx/linkstation.c @@ -0,0 +1,211 @@ +/* + * Board setup routines for the Buffalo Linkstation / Kurobox Platform. + * + * Copyright (C) 2006 G. Liakhovetski (g.liakhovetski@gmx.de) + * + * Based on sandpoint.c by Mark A. Greer + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of + * any kind, whether express or implied. + */ + +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include + +static struct mtd_partition linkstation_physmap_partitions[] = { + { + .name = "mtd_firmimg", + .offset = 0x000000, + .size = 0x300000, + }, + { + .name = "mtd_bootcode", + .offset = 0x300000, + .size = 0x070000, + }, + { + .name = "mtd_status", + .offset = 0x370000, + .size = 0x010000, + }, + { + .name = "mtd_conf", + .offset = 0x380000, + .size = 0x080000, + }, + { + .name = "mtd_allflash", + .offset = 0x000000, + .size = 0x400000, + }, + { + .name = "mtd_data", + .offset = 0x310000, + .size = 0x0f0000, + }, +}; + +static int __init add_bridge(struct device_node *dev) +{ + int len; + struct pci_controller *hose; + int *bus_range; + + printk("Adding PCI host bridge %s\n", dev->full_name); + + bus_range = (int *) get_property(dev, "bus-range", &len); + if (bus_range == NULL || len < 2 * sizeof(int)) + printk(KERN_WARNING "Can't get bus-range for %s, assume" + " bus 0\n", dev->full_name); + + hose = pcibios_alloc_controller(); + if (hose == NULL) + return -ENOMEM; + hose->first_busno = bus_range ? bus_range[0] : 0; + hose->last_busno = bus_range ? bus_range[1] : 0xff; + hose->arch_data = dev; + setup_indirect_pci(hose, 0xfec00000, 0xfee00000); + + /* Interpret the "ranges" property */ + /* This also maps the I/O region and sets isa_io/mem_base */ + pci_process_bridge_OF_ranges(hose, dev, 1); + + return 0; +} + +static void __init linkstation_setup_arch(void) +{ + struct device_node *np; +#ifdef CONFIG_MTD_PHYSMAP + physmap_set_partitions(linkstation_physmap_partitions, + ARRAY_SIZE(linkstation_physmap_partitions)); +#endif + +#ifdef CONFIG_BLK_DEV_INITRD + if (initrd_start) + ROOT_DEV = Root_RAM0; + else +#endif +#ifdef CONFIG_ROOT_NFS + ROOT_DEV = Root_NFS; +#else + ROOT_DEV = Root_HDA1; +#endif + + /* Lookup PCI host bridges */ + for (np = NULL; (np = of_find_node_by_type(np, "pci")) != NULL;) + add_bridge(np); + + printk(KERN_INFO "BUFFALO Network Attached Storage Series\n"); + printk(KERN_INFO "(C) 2002-2005 BUFFALO INC.\n"); +} + +/* + * Interrupt setup and service. Interrrupts on the linkstation come + * from the four PCI slots plus onboard 8241 devices: I2C, DUART. + */ +static void __init linkstation_init_IRQ(void) +{ + struct mpic *mpic; + struct device_node *dnp; + void *prop; + int size; + phys_addr_t paddr; + + dnp = of_find_node_by_type(NULL, "open-pic"); + if (dnp == NULL) + return; + + prop = (struct device_node *)get_property(dnp, "reg", &size); + paddr = (phys_addr_t)of_translate_address(dnp, prop); + + mpic = mpic_alloc(dnp, paddr, MPIC_PRIMARY | MPIC_WANTS_RESET, 4, 32, " EPIC "); + BUG_ON(mpic == NULL); + + /* PCI IRQs */ + mpic_assign_isu(mpic, 0, paddr + 0x10200); + + /* I2C */ + mpic_assign_isu(mpic, 1, paddr + 0x11000); + + /* ttyS0, ttyS1 */ + mpic_assign_isu(mpic, 2, paddr + 0x11100); + + mpic_init(mpic); +} + +extern void avr_uart_configure(void); +extern void avr_uart_send(const char); + +static void linkstation_restart(char *cmd) +{ + local_irq_disable(); + + /* Reset system via AVR */ + avr_uart_configure(); + /* Send reboot command */ + avr_uart_send('C'); + + for(;;) /* Spin until reset happens */ + avr_uart_send('G'); /* "kick" */ +} + +static void linkstation_power_off(void) +{ + local_irq_disable(); + + /* Power down system via AVR */ + avr_uart_configure(); + /* send shutdown command */ + avr_uart_send('E'); + + for(;;) /* Spin until power-off happens */ + avr_uart_send('G'); /* "kick" */ + /* NOTREACHED */ +} + +static void linkstation_halt(void) +{ + linkstation_power_off(); + /* NOTREACHED */ +} + +static void linkstation_show_cpuinfo(struct seq_file *m) +{ + seq_printf(m, "vendor\t\t: Buffalo Technology\n"); + seq_printf(m, "machine\t\t: Linkstation I/Kurobox(HG)\n"); +} + +static int __init linkstation_probe(void) +{ + unsigned long root; + + root = of_get_flat_dt_root(); + + if (!of_flat_dt_is_compatible(root, "linkstation")) + return 0; + return 1; +} + +define_machine(linkstation){ + .name = "Buffalo Linkstation", + .probe = linkstation_probe, + .setup_arch = linkstation_setup_arch, + .init_IRQ = linkstation_init_IRQ, + .show_cpuinfo = linkstation_show_cpuinfo, + .get_irq = mpic_get_irq, + .restart = linkstation_restart, + .power_off = linkstation_power_off, + .halt = linkstation_halt, + .calibrate_decr = generic_calibrate_decr, +}; diff --git a/arch/powerpc/platforms/embedded6xx/ls_uart.c b/arch/powerpc/platforms/embedded6xx/ls_uart.c new file mode 100644 index 00000000000..31bcdae8482 --- /dev/null +++ b/arch/powerpc/platforms/embedded6xx/ls_uart.c @@ -0,0 +1,131 @@ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +static void __iomem *avr_addr; +static unsigned long avr_clock; + +static struct work_struct wd_work; + +static void wd_stop(void *unused) +{ + const char string[] = "AAAAFFFFJJJJ>>>>VVVV>>>>ZZZZVVVVKKKK"; + int i = 0, rescue = 8; + int len = strlen(string); + + while (rescue--) { + int j; + char lsr = in_8(avr_addr + UART_LSR); + + if (lsr & (UART_LSR_THRE | UART_LSR_TEMT)) { + for (j = 0; j < 16 && i < len; j++, i++) + out_8(avr_addr + UART_TX, string[i]); + if (i == len) { + /* Read "OK" back: 4ms for the last "KKKK" + plus a couple bytes back */ + msleep(7); + printk("linkstation: disarming the AVR watchdog: "); + while (in_8(avr_addr + UART_LSR) & UART_LSR_DR) + printk("%c", in_8(avr_addr + UART_RX)); + break; + } + } + msleep(17); + } + printk("\n"); +} + +#define AVR_QUOT(clock) ((clock) + 8 * 9600) / (16 * 9600) + +void avr_uart_configure(void) +{ + unsigned char cval = UART_LCR_WLEN8; + unsigned int quot = AVR_QUOT(avr_clock); + + if (!avr_addr || !avr_clock) + return; + + out_8(avr_addr + UART_LCR, cval); /* initialise UART */ + out_8(avr_addr + UART_MCR, 0); + out_8(avr_addr + UART_IER, 0); + + cval |= UART_LCR_STOP | UART_LCR_PARITY | UART_LCR_EPAR; + + out_8(avr_addr + UART_LCR, cval); /* Set character format */ + + out_8(avr_addr + UART_LCR, cval | UART_LCR_DLAB); /* set DLAB */ + out_8(avr_addr + UART_DLL, quot & 0xff); /* LS of divisor */ + out_8(avr_addr + UART_DLM, quot >> 8); /* MS of divisor */ + out_8(avr_addr + UART_LCR, cval); /* reset DLAB */ + out_8(avr_addr + UART_FCR, UART_FCR_ENABLE_FIFO); /* enable FIFO */ +} + +void avr_uart_send(const char c) +{ + if (!avr_addr || !avr_clock) + return; + + out_8(avr_addr + UART_TX, c); + out_8(avr_addr + UART_TX, c); + out_8(avr_addr + UART_TX, c); + out_8(avr_addr + UART_TX, c); +} + +static void __init ls_uart_init(void) +{ + local_irq_disable(); + +#ifndef CONFIG_SERIAL_8250 + out_8(avr_addr + UART_FCR, UART_FCR_ENABLE_FIFO); /* enable FIFO */ + out_8(avr_addr + UART_FCR, UART_FCR_ENABLE_FIFO | + UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT); /* clear FIFOs */ + out_8(avr_addr + UART_FCR, 0); + out_8(avr_addr + UART_IER, 0); + + /* Clear up interrupts */ + (void) in_8(avr_addr + UART_LSR); + (void) in_8(avr_addr + UART_RX); + (void) in_8(avr_addr + UART_IIR); + (void) in_8(avr_addr + UART_MSR); +#endif + avr_uart_configure(); + + local_irq_enable(); +} + +static int __init ls_uarts_init(void) +{ + struct device_node *avr; + phys_addr_t phys_addr; + int len; + + avr = of_find_node_by_path("/soc10x/serial@80004500"); + if (!avr) + return -EINVAL; + + avr_clock = *(u32*)get_property(avr, "clock-frequency", &len); + phys_addr = ((u32*)get_property(avr, "reg", &len))[0]; + + if (!avr_clock || !phys_addr) + return -EINVAL; + + avr_addr = ioremap(phys_addr, 32); + if (!avr_addr) + return -EFAULT; + + ls_uart_init(); + + INIT_WORK(&wd_work, wd_stop, NULL); + schedule_work(&wd_work); + + return 0; +} + +late_initcall(ls_uarts_init); -- cgit v1.2.3-70-g09d2 From f8485350c22b25f5b9804d89cb8fdf6626d0f5cb Mon Sep 17 00:00:00 2001 From: Yan Burman Date: Sat, 2 Dec 2006 13:26:57 +0200 Subject: [POWERPC] Replace kmalloc+memset with kzalloc Replace kmalloc+memset with kzalloc. Signed-off-by: Yan Burman Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/ibmebus.c | 3 +-- arch/powerpc/kernel/pci_64.c | 3 +-- arch/powerpc/kernel/rtas_flash.c | 4 +--- arch/powerpc/kernel/smp-tbsync.c | 3 +-- arch/powerpc/platforms/iseries/iommu.c | 4 +--- arch/powerpc/platforms/iseries/viopath.c | 3 +-- arch/powerpc/platforms/pseries/reconfig.c | 3 +-- arch/powerpc/sysdev/qe_lib/ucc_fast.c | 4 +--- arch/powerpc/sysdev/qe_lib/ucc_slow.c | 4 +--- 9 files changed, 9 insertions(+), 22 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/kernel/ibmebus.c b/arch/powerpc/kernel/ibmebus.c index 8e515797de6..82bd2f10770 100644 --- a/arch/powerpc/kernel/ibmebus.c +++ b/arch/powerpc/kernel/ibmebus.c @@ -214,11 +214,10 @@ static struct ibmebus_dev* __devinit ibmebus_register_device_node( return NULL; } - dev = kmalloc(sizeof(struct ibmebus_dev), GFP_KERNEL); + dev = kzalloc(sizeof(struct ibmebus_dev), GFP_KERNEL); if (!dev) { return NULL; } - memset(dev, 0, sizeof(struct ibmebus_dev)); dev->ofdev.node = of_node_get(dn); diff --git a/arch/powerpc/kernel/pci_64.c b/arch/powerpc/kernel/pci_64.c index afee470de92..6fa9a0a5c8d 100644 --- a/arch/powerpc/kernel/pci_64.c +++ b/arch/powerpc/kernel/pci_64.c @@ -330,7 +330,7 @@ struct pci_dev *of_create_pci_dev(struct device_node *node, struct pci_dev *dev; const char *type; - dev = kmalloc(sizeof(struct pci_dev), GFP_KERNEL); + dev = kzalloc(sizeof(struct pci_dev), GFP_KERNEL); if (!dev) return NULL; type = get_property(node, "device_type", NULL); @@ -339,7 +339,6 @@ struct pci_dev *of_create_pci_dev(struct device_node *node, DBG(" create device, devfn: %x, type: %s\n", devfn, type); - memset(dev, 0, sizeof(struct pci_dev)); dev->bus = bus; dev->sysdata = node; dev->dev.parent = bus->bridge; diff --git a/arch/powerpc/kernel/rtas_flash.c b/arch/powerpc/kernel/rtas_flash.c index 6f6fc977cb3..b9561d30051 100644 --- a/arch/powerpc/kernel/rtas_flash.c +++ b/arch/powerpc/kernel/rtas_flash.c @@ -681,14 +681,12 @@ static int initialize_flash_pde_data(const char *rtas_call_name, int *status; int token; - dp->data = kmalloc(buf_size, GFP_KERNEL); + dp->data = kzalloc(buf_size, GFP_KERNEL); if (dp->data == NULL) { remove_flash_pde(dp); return -ENOMEM; } - memset(dp->data, 0, buf_size); - /* * This code assumes that the status int is the first member of the * struct diff --git a/arch/powerpc/kernel/smp-tbsync.c b/arch/powerpc/kernel/smp-tbsync.c index e1970f83f14..bc892e69b4f 100644 --- a/arch/powerpc/kernel/smp-tbsync.c +++ b/arch/powerpc/kernel/smp-tbsync.c @@ -116,8 +116,7 @@ void __devinit smp_generic_give_timebase(void) printk("Synchronizing timebase\n"); /* if this fails then this kernel won't work anyway... */ - tbsync = kmalloc( sizeof(*tbsync), GFP_KERNEL ); - memset( tbsync, 0, sizeof(*tbsync) ); + tbsync = kzalloc( sizeof(*tbsync), GFP_KERNEL ); mb(); running = 1; diff --git a/arch/powerpc/platforms/iseries/iommu.c b/arch/powerpc/platforms/iseries/iommu.c index ee0a4e42e4f..d7a756d5135 100644 --- a/arch/powerpc/platforms/iseries/iommu.c +++ b/arch/powerpc/platforms/iseries/iommu.c @@ -115,12 +115,10 @@ void iommu_table_getparms_iSeries(unsigned long busno, { struct iommu_table_cb *parms; - parms = kmalloc(sizeof(*parms), GFP_KERNEL); + parms = kzalloc(sizeof(*parms), GFP_KERNEL); if (parms == NULL) panic("PCI_DMA: TCE Table Allocation failed."); - memset(parms, 0, sizeof(*parms)); - parms->itc_busno = busno; parms->itc_slotno = slotno; parms->itc_virtbus = virtbus; diff --git a/arch/powerpc/platforms/iseries/viopath.c b/arch/powerpc/platforms/iseries/viopath.c index 04e07e5da0c..84e7ee2c086 100644 --- a/arch/powerpc/platforms/iseries/viopath.c +++ b/arch/powerpc/platforms/iseries/viopath.c @@ -119,10 +119,9 @@ static int proc_viopath_show(struct seq_file *m, void *v) struct device_node *node; const char *sysid; - buf = kmalloc(HW_PAGE_SIZE, GFP_KERNEL); + buf = kzalloc(HW_PAGE_SIZE, GFP_KERNEL); if (!buf) return 0; - memset(buf, 0, HW_PAGE_SIZE); handle = dma_map_single(iSeries_vio_dev, buf, HW_PAGE_SIZE, DMA_FROM_DEVICE); diff --git a/arch/powerpc/platforms/pseries/reconfig.c b/arch/powerpc/platforms/pseries/reconfig.c index 1773103354b..4ad33e41b00 100644 --- a/arch/powerpc/platforms/pseries/reconfig.c +++ b/arch/powerpc/platforms/pseries/reconfig.c @@ -268,11 +268,10 @@ static char * parse_next_property(char *buf, char *end, char **name, int *length static struct property *new_property(const char *name, const int length, const unsigned char *value, struct property *last) { - struct property *new = kmalloc(sizeof(*new), GFP_KERNEL); + struct property *new = kzalloc(sizeof(*new), GFP_KERNEL); if (!new) return NULL; - memset(new, 0, sizeof(*new)); if (!(new->name = kmalloc(strlen(name) + 1, GFP_KERNEL))) goto cleanup; diff --git a/arch/powerpc/sysdev/qe_lib/ucc_fast.c b/arch/powerpc/sysdev/qe_lib/ucc_fast.c index 75fa3104a43..e657559bea9 100644 --- a/arch/powerpc/sysdev/qe_lib/ucc_fast.c +++ b/arch/powerpc/sysdev/qe_lib/ucc_fast.c @@ -216,14 +216,12 @@ int ucc_fast_init(struct ucc_fast_info * uf_info, struct ucc_fast_private ** ucc return -EINVAL; } - uccf = (struct ucc_fast_private *) - kmalloc(sizeof(struct ucc_fast_private), GFP_KERNEL); + uccf = kzalloc(sizeof(struct ucc_fast_private), GFP_KERNEL); if (!uccf) { uccf_err ("ucc_fast_init: No memory for UCC slow data structure!"); return -ENOMEM; } - memset(uccf, 0, sizeof(struct ucc_fast_private)); /* Fill fast UCC structure */ uccf->uf_info = uf_info; diff --git a/arch/powerpc/sysdev/qe_lib/ucc_slow.c b/arch/powerpc/sysdev/qe_lib/ucc_slow.c index a49da6b73ec..47b56203f47 100644 --- a/arch/powerpc/sysdev/qe_lib/ucc_slow.c +++ b/arch/powerpc/sysdev/qe_lib/ucc_slow.c @@ -168,14 +168,12 @@ int ucc_slow_init(struct ucc_slow_info * us_info, struct ucc_slow_private ** ucc return -EINVAL; } - uccs = (struct ucc_slow_private *) - kmalloc(sizeof(struct ucc_slow_private), GFP_KERNEL); + uccs = kzalloc(sizeof(struct ucc_slow_private), GFP_KERNEL); if (!uccs) { uccs_err ("ucc_slow_init: No memory for UCC slow data structure!"); return -ENOMEM; } - memset(uccs, 0, sizeof(struct ucc_slow_private)); /* Fill slow UCC structure */ uccs->us_info = us_info; -- cgit v1.2.3-70-g09d2 From 872455e2ca12843e3dd16ebde1ce02dccc4bf99f Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Sun, 3 Dec 2006 20:52:27 +0300 Subject: [POWERPC] Fix debug printks for 32-bit resources in the PCI code Cure the damage done by the former PCI debug printks fix for the case of 64-bit resources (commit 685143ac1f7a579a3fac9c7f2ac8f82e95af6864) which broke it for the plain vanilla 32-bit resources... Signed-off-by: Sergei Shtylyov Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/pci_32.c | 24 +++++++++++------------- 1 file changed, 11 insertions(+), 13 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/kernel/pci_32.c b/arch/powerpc/kernel/pci_32.c index b08238f3050..2f54cd81dea 100644 --- a/arch/powerpc/kernel/pci_32.c +++ b/arch/powerpc/kernel/pci_32.c @@ -100,7 +100,7 @@ pcibios_fixup_resources(struct pci_dev *dev) continue; if (res->end == 0xffffffff) { DBG("PCI:%s Resource %d [%016llx-%016llx] is unassigned\n", - pci_name(dev), i, res->start, res->end); + pci_name(dev), i, (u64)res->start, (u64)res->end); res->end -= res->start; res->start = 0; res->flags |= IORESOURCE_UNSET; @@ -116,11 +116,9 @@ pcibios_fixup_resources(struct pci_dev *dev) if (offset != 0) { res->start += offset; res->end += offset; -#ifdef DEBUG - printk("Fixup res %d (%lx) of dev %s: %llx -> %llx\n", - i, res->flags, pci_name(dev), - res->start - offset, res->start); -#endif + DBG("Fixup res %d (%lx) of dev %s: %llx -> %llx\n", + i, res->flags, pci_name(dev), + (u64)res->start - offset, (u64)res->start); } } @@ -256,7 +254,7 @@ pcibios_allocate_bus_resources(struct list_head *bus_list) } DBG("PCI: bridge rsrc %llx..%llx (%lx), parent %p\n", - res->start, res->end, res->flags, pr); + (u64)res->start, (u64)res->end, res->flags, pr); if (pr) { if (request_resource(pr, res) == 0) continue; @@ -307,7 +305,7 @@ reparent_resources(struct resource *parent, struct resource *res) for (p = res->child; p != NULL; p = p->sibling) { p->parent = res; DBG(KERN_INFO "PCI: reparented %s [%llx..%llx] under %s\n", - p->name, p->start, p->end, res->name); + p->name, (u64)p->start, (u64)p->end, res->name); } return 0; } @@ -363,7 +361,7 @@ pci_relocate_bridge_resource(struct pci_bus *bus, int i) } if (request_resource(pr, res)) { DBG(KERN_ERR "PCI: huh? couldn't move to %llx..%llx\n", - res->start, res->end); + (u64)res->start, (u64)res->end); return -1; /* "can't happen" */ } update_bridge_base(bus, i); @@ -481,14 +479,14 @@ static inline void alloc_resource(struct pci_dev *dev, int idx) struct resource *pr, *r = &dev->resource[idx]; DBG("PCI:%s: Resource %d: %016llx-%016llx (f=%lx)\n", - pci_name(dev), idx, r->start, r->end, r->flags); + pci_name(dev), idx, (u64)r->start, (u64)r->end, r->flags); pr = pci_find_parent_resource(dev, r); if (!pr || request_resource(pr, r) < 0) { printk(KERN_ERR "PCI: Cannot allocate resource region %d" " of device %s\n", idx, pci_name(dev)); if (pr) DBG("PCI: parent is %p: %016llx-%016llx (f=%lx)\n", - pr, pr->start, pr->end, pr->flags); + pr, (u64)pr->start, (u64)pr->end, pr->flags); /* We'll assign a new address later */ r->flags |= IORESOURCE_UNSET; r->end -= r->start; @@ -961,7 +959,7 @@ pci_process_bridge_OF_ranges(struct pci_controller *hose, res->flags = IORESOURCE_IO; res->start = ranges[2]; DBG("PCI: IO 0x%llx -> 0x%llx\n", - res->start, res->start + size - 1); + (u64)res->start, (u64)res->start + size - 1); break; case 2: /* memory space */ memno = 0; @@ -983,7 +981,7 @@ pci_process_bridge_OF_ranges(struct pci_controller *hose, res->flags |= IORESOURCE_PREFETCH; res->start = ranges[na+2]; DBG("PCI: MEM[%d] 0x%llx -> 0x%llx\n", memno, - res->start, res->start + size - 1); + (u64)res->start, (u64)res->start + size - 1); } break; } -- cgit v1.2.3-70-g09d2 From 8a8944aab2e4b02550c29c45a0383dd4096dd989 Mon Sep 17 00:00:00 2001 From: Geoff Levand Date: Mon, 4 Dec 2006 16:11:38 -0800 Subject: [POWERPC] ps3: add a default zImage target Add a powerpc make target that can be loaded by the ps3 bootloader (kboot) and set this as the default image to build for that platform. Until the compressed zImage wrapper is made, this arranges for a stripped vmlinux image to be built. Signed-off-by: Geoff Levand Signed-off-by: Paul Mackerras --- arch/powerpc/boot/Makefile | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile index 4a831ae95a9..343dbcfdf08 100644 --- a/arch/powerpc/boot/Makefile +++ b/arch/powerpc/boot/Makefile @@ -149,13 +149,16 @@ $(obj)/zImage.miboot: vmlinux $(wrapperbits) $(obj)/zImage.initrd.miboot: vmlinux $(wrapperbits) $(call cmd,wrap_initrd,miboot) +$(obj)/zImage.ps3: vmlinux + $(STRIP) -s -R .comment $< -o $@ + $(obj)/uImage: vmlinux $(wrapperbits) $(call cmd,wrap,uboot) image-$(CONFIG_PPC_PSERIES) += zImage.pseries image-$(CONFIG_PPC_MAPLE) += zImage.pseries image-$(CONFIG_PPC_IBM_CELL_BLADE) += zImage.pseries -image-$(CONFIG_PPC_PS3) += zImage.pseries +image-$(CONFIG_PPC_PS3) += zImage.ps3 image-$(CONFIG_PPC_CHRP) += zImage.chrp image-$(CONFIG_PPC_EFIKA) += zImage.chrp image-$(CONFIG_PPC_PMAC) += zImage.pmac -- cgit v1.2.3-70-g09d2 From 650f3289f40e9c2789ecb22683d140a05448f71b Mon Sep 17 00:00:00 2001 From: Grant Likely Date: Mon, 4 Dec 2006 17:29:13 -0700 Subject: [POWERPC] Remove obsolete PPC_52xx and update CLASSIC32 comment The support for the 52xx-based systems is now included under CONFIG_CLASSIC32, since the 52xx chips have a 603e-based core. Signed-off-by: Grant Likely Signed-off-by: Paul Mackerras --- arch/powerpc/Kconfig | 18 ++++++++++-------- 1 file changed, 10 insertions(+), 8 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index 7b63ede083f..291c95ac4b3 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -112,7 +112,7 @@ choice default 6xx config CLASSIC32 - bool "6xx/7xx/74xx" + bool "52xx/6xx/7xx/74xx" select PPC_FPU select 6xx help @@ -121,16 +121,18 @@ config CLASSIC32 versions (821, 823, 850, 855, 860, 52xx, 82xx, 83xx), the AMCC embedded versions (403 and 405) and the high end 64 bit Power processors (POWER 3, POWER4, and IBM PPC970 also known as G5). + + This option is the catch-all for 6xx types, including some of the + embedded versions. Unless there is see an option for the specific + chip family you are using, you want this option. + + You do not want this if you are building a kernel for a 64 bit + IBM RS/6000 or an Apple G5, choose 6xx. + + If unsure, select this option - Unless you are building a kernel for one of the embedded processor - systems, 64 bit IBM RS/6000 or an Apple G5, choose 6xx. Note that the kernel runs in 32-bit mode even on 64-bit chips. -config PPC_52xx - bool "Freescale 52xx" - select 6xx - select PPC_FPU - config PPC_82xx bool "Freescale 82xx" select 6xx -- cgit v1.2.3-70-g09d2 From d8594d639135b500bf6010f981ea854092d54030 Mon Sep 17 00:00:00 2001 From: Grant Likely Date: Mon, 4 Dec 2006 17:29:12 -0700 Subject: [POWERPC] Add missing EXPORTS for mpc52xx support Signed-off-by: Grant Likely Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/of_device.c | 1 + arch/powerpc/platforms/52xx/mpc52xx_common.c | 2 ++ 2 files changed, 3 insertions(+) (limited to 'arch/powerpc') diff --git a/arch/powerpc/kernel/of_device.c b/arch/powerpc/kernel/of_device.c index 5c653986afa..8a06724e029 100644 --- a/arch/powerpc/kernel/of_device.c +++ b/arch/powerpc/kernel/of_device.c @@ -122,6 +122,7 @@ void of_device_unregister(struct of_device *ofdev) } +EXPORT_SYMBOL(of_match_node); EXPORT_SYMBOL(of_match_device); EXPORT_SYMBOL(of_device_register); EXPORT_SYMBOL(of_device_unregister); diff --git a/arch/powerpc/platforms/52xx/mpc52xx_common.c b/arch/powerpc/platforms/52xx/mpc52xx_common.c index 05b21444127..8331ff45777 100644 --- a/arch/powerpc/platforms/52xx/mpc52xx_common.c +++ b/arch/powerpc/platforms/52xx/mpc52xx_common.c @@ -43,6 +43,7 @@ mpc52xx_find_and_map(const char *compatible) return ioremap((u32)regaddr64, (u32)size64); } +EXPORT_SYMBOL(mpc52xx_find_and_map); /** @@ -72,6 +73,7 @@ mpc52xx_find_ipb_freq(struct device_node *node) return p_ipb_freq ? *p_ipb_freq : 0; } +EXPORT_SYMBOL(mpc52xx_find_ipb_freq); void __init -- cgit v1.2.3-70-g09d2