From da2014a2b080e7f3024a4eb6917d47069ad9620b Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Tue, 29 Jul 2008 21:01:19 +0900 Subject: sh: Shuffle the board directories in to mach groups. This flattens out the board directories in to individual mach groups, we will use this for getting rid of unneeded directories, simplifying the build system, and becoming more coherent with the refactored arch/sh/include topology. Signed-off-by: Paul Mundt --- arch/sh/boards/mach-se/7780/irq.c | 46 +++++++++++++++++++++++++++++++++++++++ 1 file changed, 46 insertions(+) create mode 100644 arch/sh/boards/mach-se/7780/irq.c (limited to 'arch/sh/boards/mach-se/7780/irq.c') diff --git a/arch/sh/boards/mach-se/7780/irq.c b/arch/sh/boards/mach-se/7780/irq.c new file mode 100644 index 00000000000..6bd70da6bb4 --- /dev/null +++ b/arch/sh/boards/mach-se/7780/irq.c @@ -0,0 +1,46 @@ +/* + * linux/arch/sh/boards/se/7780/irq.c + * + * Copyright (C) 2006,2007 Nobuhiro Iwamatsu + * + * Hitachi UL SolutionEngine 7780 Support. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include +#include +#include +#include +#include +#include + +/* + * Initialize IRQ setting + */ +void __init init_se7780_IRQ(void) +{ + /* enable all interrupt at FPGA */ + ctrl_outw(0, FPGA_INTMSK1); + /* mask SM501 interrupt */ + ctrl_outw((ctrl_inw(FPGA_INTMSK1) | 0x0002), FPGA_INTMSK1); + /* enable all interrupt at FPGA */ + ctrl_outw(0, FPGA_INTMSK2); + + /* set FPGA INTSEL register */ + /* FPGA + 0x06 */ + ctrl_outw( ((IRQPIN_SM501 << IRQPOS_SM501) | + (IRQPIN_SMC91CX << IRQPOS_SMC91CX)), FPGA_INTSEL1); + + /* FPGA + 0x08 */ + ctrl_outw(((IRQPIN_EXTINT4 << IRQPOS_EXTINT4) | + (IRQPIN_EXTINT3 << IRQPOS_EXTINT3) | + (IRQPIN_EXTINT2 << IRQPOS_EXTINT2) | + (IRQPIN_EXTINT1 << IRQPOS_EXTINT1)), FPGA_INTSEL2); + + /* FPGA + 0x0A */ + ctrl_outw((IRQPIN_PCCPW << IRQPOS_PCCPW), FPGA_INTSEL3); + + plat_irq_setup_pins(IRQ_MODE_IRQ); /* install handlers for IRQ0-7 */ +} -- cgit v1.2.3-70-g09d2 From 939a24a6df24649cea9fd0ff54fe71ee0dc1d61e Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Tue, 29 Jul 2008 21:41:37 +0900 Subject: sh: Move out the solution engine headers to arch/sh/include/mach-se/ Signed-off-by: Paul Mundt --- arch/sh/Kconfig | 247 +--------------------------------- arch/sh/Makefile | 15 +-- arch/sh/boards/Kconfig | 245 +++++++++++++++++++++++++++++++++ arch/sh/boards/mach-se/7206/io.c | 2 +- arch/sh/boards/mach-se/7206/irq.c | 2 +- arch/sh/boards/mach-se/7206/setup.c | 2 +- arch/sh/boards/mach-se/7343/irq.c | 6 +- arch/sh/boards/mach-se/7343/setup.c | 4 +- arch/sh/boards/mach-se/770x/io.c | 2 +- arch/sh/boards/mach-se/770x/irq.c | 2 +- arch/sh/boards/mach-se/770x/setup.c | 2 +- arch/sh/boards/mach-se/7721/irq.c | 2 +- arch/sh/boards/mach-se/7721/setup.c | 2 +- arch/sh/boards/mach-se/7722/irq.c | 2 +- arch/sh/boards/mach-se/7722/setup.c | 2 +- arch/sh/boards/mach-se/7751/io.c | 2 +- arch/sh/boards/mach-se/7751/irq.c | 2 +- arch/sh/boards/mach-se/7751/setup.c | 2 +- arch/sh/boards/mach-se/7780/irq.c | 2 +- arch/sh/boards/mach-se/7780/setup.c | 2 +- arch/sh/boards/mach-se/Makefile | 8 ++ arch/sh/drivers/pci/ops-se7780.c | 2 +- arch/sh/include/asm/se.h | 99 -------------- arch/sh/include/asm/se7206.h | 13 -- arch/sh/include/asm/se7343.h | 149 -------------------- arch/sh/include/asm/se7721.h | 70 ---------- arch/sh/include/asm/se7722.h | 112 --------------- arch/sh/include/asm/se7751.h | 73 ---------- arch/sh/include/asm/se7780.h | 108 --------------- arch/sh/include/mach-se/mach/se.h | 99 ++++++++++++++ arch/sh/include/mach-se/mach/se7206.h | 13 ++ arch/sh/include/mach-se/mach/se7343.h | 149 ++++++++++++++++++++ arch/sh/include/mach-se/mach/se7721.h | 70 ++++++++++ arch/sh/include/mach-se/mach/se7722.h | 112 +++++++++++++++ arch/sh/include/mach-se/mach/se7751.h | 73 ++++++++++ arch/sh/include/mach-se/mach/se7780.h | 108 +++++++++++++++ arch/sh/kernel/cf-enabler.c | 6 +- 37 files changed, 906 insertions(+), 905 deletions(-) create mode 100644 arch/sh/boards/Kconfig create mode 100644 arch/sh/boards/mach-se/Makefile delete mode 100644 arch/sh/include/asm/se.h delete mode 100644 arch/sh/include/asm/se7206.h delete mode 100644 arch/sh/include/asm/se7343.h delete mode 100644 arch/sh/include/asm/se7721.h delete mode 100644 arch/sh/include/asm/se7722.h delete mode 100644 arch/sh/include/asm/se7751.h delete mode 100644 arch/sh/include/asm/se7780.h create mode 100644 arch/sh/include/mach-se/mach/se.h create mode 100644 arch/sh/include/mach-se/mach/se7206.h create mode 100644 arch/sh/include/mach-se/mach/se7343.h create mode 100644 arch/sh/include/mach-se/mach/se7721.h create mode 100644 arch/sh/include/mach-se/mach/se7722.h create mode 100644 arch/sh/include/mach-se/mach/se7751.h create mode 100644 arch/sh/include/mach-se/mach/se7780.h (limited to 'arch/sh/boards/mach-se/7780/irq.c') diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig index 83d170ccb0f..2b742206ba0 100644 --- a/arch/sh/Kconfig +++ b/arch/sh/Kconfig @@ -352,253 +352,10 @@ config CPU_SUBTYPE_SH5_103 endchoice source "arch/sh/mm/Kconfig" + source "arch/sh/Kconfig.cpu" -menu "Board support" - -config SOLUTION_ENGINE - bool - -config SH_SOLUTION_ENGINE - bool "SolutionEngine" - select SOLUTION_ENGINE - select CPU_HAS_IPR_IRQ - depends on CPU_SUBTYPE_SH7705 || CPU_SUBTYPE_SH7709 || CPU_SUBTYPE_SH7710 || \ - CPU_SUBTYPE_SH7712 || CPU_SUBTYPE_SH7750 || CPU_SUBTYPE_SH7750S || \ - CPU_SUBTYPE_SH7750R - help - Select SolutionEngine if configuring for a Hitachi SH7705, SH7709, - SH7710, SH7712, SH7750, SH7750S or SH7750R evaluation board. - -config SH_7206_SOLUTION_ENGINE - bool "SolutionEngine7206" - select SOLUTION_ENGINE - depends on CPU_SUBTYPE_SH7206 - help - Select 7206 SolutionEngine if configuring for a Hitachi SH7206 - evaluation board. - -config SH_7619_SOLUTION_ENGINE - bool "SolutionEngine7619" - select SOLUTION_ENGINE - depends on CPU_SUBTYPE_SH7619 - help - Select 7619 SolutionEngine if configuring for a Hitachi SH7619 - evaluation board. - -config SH_7721_SOLUTION_ENGINE - bool "SolutionEngine7721" - select SOLUTION_ENGINE - depends on CPU_SUBTYPE_SH7721 - help - Select 7721 SolutionEngine if configuring for a Hitachi SH7721 - evaluation board. - -config SH_7722_SOLUTION_ENGINE - bool "SolutionEngine7722" - select SOLUTION_ENGINE - depends on CPU_SUBTYPE_SH7722 - help - Select 7722 SolutionEngine if configuring for a Hitachi SH772 - evaluation board. - -config SH_7751_SOLUTION_ENGINE - bool "SolutionEngine7751" - select SOLUTION_ENGINE - select CPU_HAS_IPR_IRQ - depends on CPU_SUBTYPE_SH7751 - help - Select 7751 SolutionEngine if configuring for a Hitachi SH7751 - evaluation board. - -config SH_7780_SOLUTION_ENGINE - bool "SolutionEngine7780" - select SOLUTION_ENGINE - select SYS_SUPPORTS_PCI - depends on CPU_SUBTYPE_SH7780 - help - Select 7780 SolutionEngine if configuring for a Renesas SH7780 - evaluation board. - -config SH_7343_SOLUTION_ENGINE - bool "SolutionEngine7343" - select SOLUTION_ENGINE - depends on CPU_SUBTYPE_SH7343 - help - Select 7343 SolutionEngine if configuring for a Hitachi - SH7343 (SH-Mobile 3AS) evaluation board. - -config SH_7751_SYSTEMH - bool "SystemH7751R" - depends on CPU_SUBTYPE_SH7751R - help - Select SystemH if you are configuring for a Renesas SystemH - 7751R evaluation board. - -config SH_HP6XX - bool "HP6XX" - select SYS_SUPPORTS_APM_EMULATION - select HD6446X_SERIES - depends on CPU_SUBTYPE_SH7709 - help - Select HP6XX if configuring for a HP jornada HP6xx. - More information (hardware only) at - . - -config SH_DREAMCAST - bool "Dreamcast" - select SYS_SUPPORTS_PCI - depends on CPU_SUBTYPE_SH7091 - help - Select Dreamcast if configuring for a SEGA Dreamcast. - More information at - -config SH_SH03 - bool "Interface CTP/PCI-SH03" - depends on CPU_SUBTYPE_SH7751 - select CPU_HAS_IPR_IRQ - select SYS_SUPPORTS_PCI - help - CTP/PCI-SH03 is a CPU module computer that is produced - by Interface Corporation. - More information at - -config SH_SECUREEDGE5410 - bool "SecureEdge5410" - depends on CPU_SUBTYPE_SH7751R - select CPU_HAS_IPR_IRQ - select SYS_SUPPORTS_PCI - help - Select SecureEdge5410 if configuring for a SnapGear SH board. - This includes both the OEM SecureEdge products as well as the - SME product line. - -config SH_RTS7751R2D - bool "RTS7751R2D" - depends on CPU_SUBTYPE_SH7751R - select SYS_SUPPORTS_PCI - select IO_TRAPPED - help - Select RTS7751R2D if configuring for a Renesas Technology - Sales SH-Graphics board. - -config SH_RSK7203 - bool "RSK7203" - depends on CPU_SUBTYPE_SH7203 - -config SH_SDK7780 - bool "SDK7780R3" - depends on CPU_SUBTYPE_SH7780 - select SYS_SUPPORTS_PCI - help - Select SDK7780 if configuring for a Renesas SH7780 SDK7780R3 - evaluation board. - -config SH_HIGHLANDER - bool "Highlander" - depends on CPU_SUBTYPE_SH7780 || CPU_SUBTYPE_SH7785 - select SYS_SUPPORTS_PCI - select IO_TRAPPED - -config SH_SH7785LCR - bool "SH7785LCR" - depends on CPU_SUBTYPE_SH7785 - select SYS_SUPPORTS_PCI - select IO_TRAPPED - -config SH_SH7785LCR_29BIT_PHYSMAPS - bool "SH7785LCR 29bit physmaps" - depends on SH_SH7785LCR - default y - help - This board has 2 physical memory maps. It can be changed with - DIP switch(S2-5). If you set the DIP switch for S2-5 = ON, - you can access all on-board device in 29bit address mode. - -config SH_MIGOR - bool "Migo-R" - depends on CPU_SUBTYPE_SH7722 - help - Select Migo-R if configuring for the SH7722 Migo-R platform - by Renesas System Solutions Asia Pte. Ltd. - -config SH_AP325RXA - bool "AP-325RXA" - depends on CPU_SUBTYPE_SH7723 - help - Renesas "AP-325RXA" support. - Compatible with ALGO SYSTEM CO.,LTD. "AP-320A" - -config SH_SH7763RDP - bool "SH7763RDP" - depends on CPU_SUBTYPE_SH7763 - help - Select SH7763RDP if configuring for a Renesas SH7763 - evaluation board. - -config SH_EDOSK7705 - bool "EDOSK7705" - depends on CPU_SUBTYPE_SH7705 - -config SH_SH4202_MICRODEV - bool "SH4-202 MicroDev" - depends on CPU_SUBTYPE_SH4_202 - help - Select SH4-202 MicroDev if configuring for a SuperH MicroDev board - with an SH4-202 CPU. - -config SH_LANDISK - bool "LANDISK" - depends on CPU_SUBTYPE_SH7751R - select SYS_SUPPORTS_PCI - help - I-O DATA DEVICE, INC. "LANDISK Series" support. - -config SH_TITAN - bool "TITAN" - depends on CPU_SUBTYPE_SH7751R - select CPU_HAS_IPR_IRQ - select SYS_SUPPORTS_PCI - help - Select Titan if you are configuring for a Nimble Microsystems - NetEngine NP51R. - -config SH_SHMIN - bool "SHMIN" - depends on CPU_SUBTYPE_SH7706 - select CPU_HAS_IPR_IRQ - help - Select SHMIN if configuring for the SHMIN board. - -config SH_LBOX_RE2 - bool "L-BOX RE2" - depends on CPU_SUBTYPE_SH7751R - select SYS_SUPPORTS_PCI - help - Select L-BOX RE2 if configuring for the NTT COMWARE L-BOX RE2. - -config SH_X3PROTO - bool "SH-X3 Prototype board" - depends on CPU_SUBTYPE_SHX3 - -config SH_MAGIC_PANEL_R2 - bool "Magic Panel R2" - depends on CPU_SUBTYPE_SH7720 - help - Select Magic Panel R2 if configuring for Magic Panel R2. - -config SH_CAYMAN - bool "Hitachi Cayman" - depends on CPU_SUBTYPE_SH5_101 || CPU_SUBTYPE_SH5_103 - select SYS_SUPPORTS_PCI - -endmenu - -source "arch/sh/boards/mach-r2d/Kconfig" -source "arch/sh/boards/mach-highlander/Kconfig" -source "arch/sh/boards/mach-sdk7780/Kconfig" -source "arch/sh/boards/mach-migor/Kconfig" -source "arch/sh/boards/mach-magicpanelr2/Kconfig" +source "arch/sh/boards/Kconfig" menu "Timer and clock configuration" diff --git a/arch/sh/Makefile b/arch/sh/Makefile index 47bbfd8ae66..fb3b65ed291 100644 --- a/arch/sh/Makefile +++ b/arch/sh/Makefile @@ -101,15 +101,8 @@ LIBGCC := $(shell $(CC) $(KBUILD_CFLAGS) -print-libgcc-file-name) core-y += arch/sh/kernel/ arch/sh/mm/ core-$(CONFIG_SH_FPU_EMU) += arch/sh/math-emu/ -# Boards -machdir-$(CONFIG_SH_SOLUTION_ENGINE) += mach-se/770x -machdir-$(CONFIG_SH_7206_SOLUTION_ENGINE) += mach-se/7206 -machdir-$(CONFIG_SH_7619_SOLUTION_ENGINE) += mach-se/7619 -machdir-$(CONFIG_SH_7722_SOLUTION_ENGINE) += mach-se/7722 -machdir-$(CONFIG_SH_7751_SOLUTION_ENGINE) += mach-se/7751 -machdir-$(CONFIG_SH_7780_SOLUTION_ENGINE) += mach-se/7780 -machdir-$(CONFIG_SH_7343_SOLUTION_ENGINE) += mach-se/7343 -machdir-$(CONFIG_SH_7721_SOLUTION_ENGINE) += mach-se/7721 +# Boards and Mach groups +machdir-$(CONFIG_SOLUTION_ENGINE) += mach-se machdir-$(CONFIG_SH_HP6XX) += mach-hp6xx machdir-$(CONFIG_SH_DREAMCAST) += mach-dreamcast machdir-$(CONFIG_SH_SH03) += mach-sh03 @@ -133,8 +126,6 @@ machdir-$(CONFIG_SH_LBOX_RE2) += mach-lboxre2 machdir-$(CONFIG_SH_MAGIC_PANEL_R2) += mach-magicpanelr2 machdir-$(CONFIG_SH_CAYMAN) += mach-cayman -incdir-y := $(notdir $(machdir-y)) - ifneq ($(machdir-y),) core-y += $(addprefix arch/sh/boards/, \ $(filter-out ., $(patsubst %,%/,$(machdir-y)))) @@ -159,7 +150,7 @@ drivers-$(CONFIG_OPROFILE) += arch/sh/oprofile/ boot := arch/sh/boot cflags-y += -Iarch/sh/include/$(cpuincdir-y) -cflags-y += $(foreach d, $(incdir-y), -Iarch/sh/include/mach-$(d)) +cflags-y += $(foreach d, $(machdir-y), -Iarch/sh/include/$(d)) KBUILD_CFLAGS += -pipe $(cflags-y) KBUILD_CPPFLAGS += $(cflags-y) diff --git a/arch/sh/boards/Kconfig b/arch/sh/boards/Kconfig new file mode 100644 index 00000000000..324c25ac95c --- /dev/null +++ b/arch/sh/boards/Kconfig @@ -0,0 +1,245 @@ +menu "Board support" + +config SOLUTION_ENGINE + bool + +config SH_SOLUTION_ENGINE + bool "SolutionEngine" + select SOLUTION_ENGINE + select CPU_HAS_IPR_IRQ + depends on CPU_SUBTYPE_SH7705 || CPU_SUBTYPE_SH7709 || CPU_SUBTYPE_SH7710 || \ + CPU_SUBTYPE_SH7712 || CPU_SUBTYPE_SH7750 || CPU_SUBTYPE_SH7750S || \ + CPU_SUBTYPE_SH7750R + help + Select SolutionEngine if configuring for a Hitachi SH7705, SH7709, + SH7710, SH7712, SH7750, SH7750S or SH7750R evaluation board. + +config SH_7206_SOLUTION_ENGINE + bool "SolutionEngine7206" + select SOLUTION_ENGINE + depends on CPU_SUBTYPE_SH7206 + help + Select 7206 SolutionEngine if configuring for a Hitachi SH7206 + evaluation board. + +config SH_7619_SOLUTION_ENGINE + bool "SolutionEngine7619" + select SOLUTION_ENGINE + depends on CPU_SUBTYPE_SH7619 + help + Select 7619 SolutionEngine if configuring for a Hitachi SH7619 + evaluation board. + +config SH_7721_SOLUTION_ENGINE + bool "SolutionEngine7721" + select SOLUTION_ENGINE + depends on CPU_SUBTYPE_SH7721 + help + Select 7721 SolutionEngine if configuring for a Hitachi SH7721 + evaluation board. + +config SH_7722_SOLUTION_ENGINE + bool "SolutionEngine7722" + select SOLUTION_ENGINE + depends on CPU_SUBTYPE_SH7722 + help + Select 7722 SolutionEngine if configuring for a Hitachi SH772 + evaluation board. + +config SH_7751_SOLUTION_ENGINE + bool "SolutionEngine7751" + select SOLUTION_ENGINE + select CPU_HAS_IPR_IRQ + depends on CPU_SUBTYPE_SH7751 + help + Select 7751 SolutionEngine if configuring for a Hitachi SH7751 + evaluation board. + +config SH_7780_SOLUTION_ENGINE + bool "SolutionEngine7780" + select SOLUTION_ENGINE + select SYS_SUPPORTS_PCI + depends on CPU_SUBTYPE_SH7780 + help + Select 7780 SolutionEngine if configuring for a Renesas SH7780 + evaluation board. + +config SH_7343_SOLUTION_ENGINE + bool "SolutionEngine7343" + select SOLUTION_ENGINE + depends on CPU_SUBTYPE_SH7343 + help + Select 7343 SolutionEngine if configuring for a Hitachi + SH7343 (SH-Mobile 3AS) evaluation board. + +config SH_7751_SYSTEMH + bool "SystemH7751R" + depends on CPU_SUBTYPE_SH7751R + help + Select SystemH if you are configuring for a Renesas SystemH + 7751R evaluation board. + +config SH_HP6XX + bool "HP6XX" + select SYS_SUPPORTS_APM_EMULATION + select HD6446X_SERIES + depends on CPU_SUBTYPE_SH7709 + help + Select HP6XX if configuring for a HP jornada HP6xx. + More information (hardware only) at + . + +config SH_DREAMCAST + bool "Dreamcast" + select SYS_SUPPORTS_PCI + depends on CPU_SUBTYPE_SH7091 + help + Select Dreamcast if configuring for a SEGA Dreamcast. + More information at + +config SH_SH03 + bool "Interface CTP/PCI-SH03" + depends on CPU_SUBTYPE_SH7751 + select CPU_HAS_IPR_IRQ + select SYS_SUPPORTS_PCI + help + CTP/PCI-SH03 is a CPU module computer that is produced + by Interface Corporation. + More information at + +config SH_SECUREEDGE5410 + bool "SecureEdge5410" + depends on CPU_SUBTYPE_SH7751R + select CPU_HAS_IPR_IRQ + select SYS_SUPPORTS_PCI + help + Select SecureEdge5410 if configuring for a SnapGear SH board. + This includes both the OEM SecureEdge products as well as the + SME product line. + +config SH_RTS7751R2D + bool "RTS7751R2D" + depends on CPU_SUBTYPE_SH7751R + select SYS_SUPPORTS_PCI + select IO_TRAPPED + help + Select RTS7751R2D if configuring for a Renesas Technology + Sales SH-Graphics board. + +config SH_RSK7203 + bool "RSK7203" + depends on CPU_SUBTYPE_SH7203 + +config SH_SDK7780 + bool "SDK7780R3" + depends on CPU_SUBTYPE_SH7780 + select SYS_SUPPORTS_PCI + help + Select SDK7780 if configuring for a Renesas SH7780 SDK7780R3 + evaluation board. + +config SH_HIGHLANDER + bool "Highlander" + depends on CPU_SUBTYPE_SH7780 || CPU_SUBTYPE_SH7785 + select SYS_SUPPORTS_PCI + select IO_TRAPPED + +config SH_SH7785LCR + bool "SH7785LCR" + depends on CPU_SUBTYPE_SH7785 + select SYS_SUPPORTS_PCI + select IO_TRAPPED + +config SH_SH7785LCR_29BIT_PHYSMAPS + bool "SH7785LCR 29bit physmaps" + depends on SH_SH7785LCR + default y + help + This board has 2 physical memory maps. It can be changed with + DIP switch(S2-5). If you set the DIP switch for S2-5 = ON, + you can access all on-board device in 29bit address mode. + +config SH_MIGOR + bool "Migo-R" + depends on CPU_SUBTYPE_SH7722 + help + Select Migo-R if configuring for the SH7722 Migo-R platform + by Renesas System Solutions Asia Pte. Ltd. + +config SH_AP325RXA + bool "AP-325RXA" + depends on CPU_SUBTYPE_SH7723 + help + Renesas "AP-325RXA" support. + Compatible with ALGO SYSTEM CO.,LTD. "AP-320A" + +config SH_SH7763RDP + bool "SH7763RDP" + depends on CPU_SUBTYPE_SH7763 + help + Select SH7763RDP if configuring for a Renesas SH7763 + evaluation board. + +config SH_EDOSK7705 + bool "EDOSK7705" + depends on CPU_SUBTYPE_SH7705 + +config SH_SH4202_MICRODEV + bool "SH4-202 MicroDev" + depends on CPU_SUBTYPE_SH4_202 + help + Select SH4-202 MicroDev if configuring for a SuperH MicroDev board + with an SH4-202 CPU. + +config SH_LANDISK + bool "LANDISK" + depends on CPU_SUBTYPE_SH7751R + select SYS_SUPPORTS_PCI + help + I-O DATA DEVICE, INC. "LANDISK Series" support. + +config SH_TITAN + bool "TITAN" + depends on CPU_SUBTYPE_SH7751R + select CPU_HAS_IPR_IRQ + select SYS_SUPPORTS_PCI + help + Select Titan if you are configuring for a Nimble Microsystems + NetEngine NP51R. + +config SH_SHMIN + bool "SHMIN" + depends on CPU_SUBTYPE_SH7706 + select CPU_HAS_IPR_IRQ + help + Select SHMIN if configuring for the SHMIN board. + +config SH_LBOX_RE2 + bool "L-BOX RE2" + depends on CPU_SUBTYPE_SH7751R + select SYS_SUPPORTS_PCI + help + Select L-BOX RE2 if configuring for the NTT COMWARE L-BOX RE2. + +config SH_X3PROTO + bool "SH-X3 Prototype board" + depends on CPU_SUBTYPE_SHX3 + +config SH_MAGIC_PANEL_R2 + bool "Magic Panel R2" + depends on CPU_SUBTYPE_SH7720 + help + Select Magic Panel R2 if configuring for Magic Panel R2. + +config SH_CAYMAN + bool "Hitachi Cayman" + depends on CPU_SUBTYPE_SH5_101 || CPU_SUBTYPE_SH5_103 + select SYS_SUPPORTS_PCI + +endmenu + +source "arch/sh/boards/mach-r2d/Kconfig" +source "arch/sh/boards/mach-highlander/Kconfig" +source "arch/sh/boards/mach-sdk7780/Kconfig" +source "arch/sh/boards/mach-migor/Kconfig" +source "arch/sh/boards/mach-magicpanelr2/Kconfig" diff --git a/arch/sh/boards/mach-se/7206/io.c b/arch/sh/boards/mach-se/7206/io.c index 1308e618e04..9c3a33210d6 100644 --- a/arch/sh/boards/mach-se/7206/io.c +++ b/arch/sh/boards/mach-se/7206/io.c @@ -11,7 +11,7 @@ #include #include #include -#include +#include static inline void delay(void) diff --git a/arch/sh/boards/mach-se/7206/irq.c b/arch/sh/boards/mach-se/7206/irq.c index 9d5bfc77d0d..aef7f052851 100644 --- a/arch/sh/boards/mach-se/7206/irq.c +++ b/arch/sh/boards/mach-se/7206/irq.c @@ -10,7 +10,7 @@ #include #include #include -#include +#include #define INTSTS0 0x31800000 #define INTSTS1 0x31800002 diff --git a/arch/sh/boards/mach-se/7206/setup.c b/arch/sh/boards/mach-se/7206/setup.c index 4fe84cc0840..f5466384972 100644 --- a/arch/sh/boards/mach-se/7206/setup.c +++ b/arch/sh/boards/mach-se/7206/setup.c @@ -10,7 +10,7 @@ #include #include #include -#include +#include #include #include #include diff --git a/arch/sh/boards/mach-se/7343/irq.c b/arch/sh/boards/mach-se/7343/irq.c index 1112e86aa93..5d96e2eef82 100644 --- a/arch/sh/boards/mach-se/7343/irq.c +++ b/arch/sh/boards/mach-se/7343/irq.c @@ -13,9 +13,9 @@ #include #include #include -#include -#include -#include +#include +#include +#include static void disable_se7343_irq(unsigned int irq) { diff --git a/arch/sh/boards/mach-se/7343/setup.c b/arch/sh/boards/mach-se/7343/setup.c index 59dc92e20f6..486f40bf927 100644 --- a/arch/sh/boards/mach-se/7343/setup.c +++ b/arch/sh/boards/mach-se/7343/setup.c @@ -1,8 +1,8 @@ #include #include #include -#include -#include +#include +#include #include #include #include diff --git a/arch/sh/boards/mach-se/770x/io.c b/arch/sh/boards/mach-se/770x/io.c index b1ec085b867..28833c8786e 100644 --- a/arch/sh/boards/mach-se/770x/io.c +++ b/arch/sh/boards/mach-se/770x/io.c @@ -6,7 +6,7 @@ #include #include #include -#include +#include /* MS7750 requires special versions of in*, out* routines, since PC-like io ports are located at upper half byte of 16-bit word which diff --git a/arch/sh/boards/mach-se/770x/irq.c b/arch/sh/boards/mach-se/770x/irq.c index cdb0807928a..ec1fea571b5 100644 --- a/arch/sh/boards/mach-se/770x/irq.c +++ b/arch/sh/boards/mach-se/770x/irq.c @@ -13,7 +13,7 @@ #include #include #include -#include +#include static struct ipr_data ipr_irq_table[] = { /* diff --git a/arch/sh/boards/mach-se/770x/setup.c b/arch/sh/boards/mach-se/770x/setup.c index 6c64d774da3..9123d9687bf 100644 --- a/arch/sh/boards/mach-se/770x/setup.c +++ b/arch/sh/boards/mach-se/770x/setup.c @@ -9,7 +9,7 @@ #include #include #include -#include +#include #include #include #include diff --git a/arch/sh/boards/mach-se/7721/irq.c b/arch/sh/boards/mach-se/7721/irq.c index c4fdd622bf8..b417acc4dad 100644 --- a/arch/sh/boards/mach-se/7721/irq.c +++ b/arch/sh/boards/mach-se/7721/irq.c @@ -11,7 +11,7 @@ #include #include #include -#include +#include enum { UNUSED = 0, diff --git a/arch/sh/boards/mach-se/7721/setup.c b/arch/sh/boards/mach-se/7721/setup.c index 1be3e92752f..d3fc80ff4d8 100644 --- a/arch/sh/boards/mach-se/7721/setup.c +++ b/arch/sh/boards/mach-se/7721/setup.c @@ -13,7 +13,7 @@ #include #include #include -#include +#include #include #include diff --git a/arch/sh/boards/mach-se/7722/irq.c b/arch/sh/boards/mach-se/7722/irq.c index 0b03f3f610b..02d21a3e2a8 100644 --- a/arch/sh/boards/mach-se/7722/irq.c +++ b/arch/sh/boards/mach-se/7722/irq.c @@ -14,7 +14,7 @@ #include #include #include -#include +#include static void disable_se7722_irq(unsigned int irq) { diff --git a/arch/sh/boards/mach-se/7722/setup.c b/arch/sh/boards/mach-se/7722/setup.c index 6e228ea5978..fe6f96517e1 100644 --- a/arch/sh/boards/mach-se/7722/setup.c +++ b/arch/sh/boards/mach-se/7722/setup.c @@ -17,7 +17,7 @@ #include #include #include -#include +#include #include #include #include diff --git a/arch/sh/boards/mach-se/7751/io.c b/arch/sh/boards/mach-se/7751/io.c index e8d846cec89..6287ae57031 100644 --- a/arch/sh/boards/mach-se/7751/io.c +++ b/arch/sh/boards/mach-se/7751/io.c @@ -12,7 +12,7 @@ #include #include #include -#include +#include #include static inline volatile u16 *port2adr(unsigned int port) diff --git a/arch/sh/boards/mach-se/7751/irq.c b/arch/sh/boards/mach-se/7751/irq.c index c3d12590e5d..5c9847ea1e7 100644 --- a/arch/sh/boards/mach-se/7751/irq.c +++ b/arch/sh/boards/mach-se/7751/irq.c @@ -12,7 +12,7 @@ #include #include #include -#include +#include static struct ipr_data ipr_irq_table[] = { { 13, 3, 3, 2 }, diff --git a/arch/sh/boards/mach-se/7751/setup.c b/arch/sh/boards/mach-se/7751/setup.c index deefbfd9259..50572512e3e 100644 --- a/arch/sh/boards/mach-se/7751/setup.c +++ b/arch/sh/boards/mach-se/7751/setup.c @@ -11,7 +11,7 @@ #include #include #include -#include +#include #include #include diff --git a/arch/sh/boards/mach-se/7780/irq.c b/arch/sh/boards/mach-se/7780/irq.c index 6bd70da6bb4..66ad292c9fc 100644 --- a/arch/sh/boards/mach-se/7780/irq.c +++ b/arch/sh/boards/mach-se/7780/irq.c @@ -14,7 +14,7 @@ #include #include #include -#include +#include /* * Initialize IRQ setting diff --git a/arch/sh/boards/mach-se/7780/setup.c b/arch/sh/boards/mach-se/7780/setup.c index 0f08ab3b2be..1d3a867e94e 100644 --- a/arch/sh/boards/mach-se/7780/setup.c +++ b/arch/sh/boards/mach-se/7780/setup.c @@ -12,7 +12,7 @@ #include #include #include -#include +#include #include #include diff --git a/arch/sh/boards/mach-se/Makefile b/arch/sh/boards/mach-se/Makefile new file mode 100644 index 00000000000..ad2b38ef65d --- /dev/null +++ b/arch/sh/boards/mach-se/Makefile @@ -0,0 +1,8 @@ +obj-$(CONFIG_SH_SOLUTION_ENGINE) += 770x/ +obj-$(CONFIG_SH_7206_SOLUTION_ENGINE) += 7206/ +obj-$(CONFIG_SH_7619_SOLUTION_ENGINE) += 7619/ +obj-$(CONFIG_SH_7722_SOLUTION_ENGINE) += 7722/ +obj-$(CONFIG_SH_7751_SOLUTION_ENGINE) += 7751/ +obj-$(CONFIG_SH_7780_SOLUTION_ENGINE) += 7780/ +obj-$(CONFIG_SH_7343_SOLUTION_ENGINE) += 7343/ +obj-$(CONFIG_SH_7721_SOLUTION_ENGINE) += 7721/ diff --git a/arch/sh/drivers/pci/ops-se7780.c b/arch/sh/drivers/pci/ops-se7780.c index bbdb48c124a..3145c62484d 100644 --- a/arch/sh/drivers/pci/ops-se7780.c +++ b/arch/sh/drivers/pci/ops-se7780.c @@ -13,7 +13,7 @@ #include #include #include -#include +#include #include #include "pci-sh4.h" diff --git a/arch/sh/include/asm/se.h b/arch/sh/include/asm/se.h deleted file mode 100644 index eb23000e1bb..00000000000 --- a/arch/sh/include/asm/se.h +++ /dev/null @@ -1,99 +0,0 @@ -#ifndef __ASM_SH_HITACHI_SE_H -#define __ASM_SH_HITACHI_SE_H - -/* - * linux/include/asm-sh/hitachi_se.h - * - * Copyright (C) 2000 Kazumoto Kojima - * - * Hitachi SolutionEngine support - */ - -/* Box specific addresses. */ - -#define PA_ROM 0x00000000 /* EPROM */ -#define PA_ROM_SIZE 0x00400000 /* EPROM size 4M byte */ -#define PA_FROM 0x01000000 /* EPROM */ -#define PA_FROM_SIZE 0x00400000 /* EPROM size 4M byte */ -#define PA_EXT1 0x04000000 -#define PA_EXT1_SIZE 0x04000000 -#define PA_EXT2 0x08000000 -#define PA_EXT2_SIZE 0x04000000 -#define PA_SDRAM 0x0c000000 -#define PA_SDRAM_SIZE 0x04000000 - -#define PA_EXT4 0x12000000 -#define PA_EXT4_SIZE 0x02000000 -#define PA_EXT5 0x14000000 -#define PA_EXT5_SIZE 0x04000000 -#define PA_PCIC 0x18000000 /* MR-SHPC-01 PCMCIA */ - -#define PA_83902 0xb0000000 /* DP83902A */ -#define PA_83902_IF 0xb0040000 /* DP83902A remote io port */ -#define PA_83902_RST 0xb0080000 /* DP83902A reset port */ - -#define PA_SUPERIO 0xb0400000 /* SMC37C935A super io chip */ -#define PA_DIPSW0 0xb0800000 /* Dip switch 5,6 */ -#define PA_DIPSW1 0xb0800002 /* Dip switch 7,8 */ -#define PA_LED 0xb0c00000 /* LED */ -#if defined(CONFIG_CPU_SUBTYPE_SH7705) -#define PA_BCR 0xb0e00000 -#else -#define PA_BCR 0xb1400000 /* FPGA */ -#endif - -#define PA_MRSHPC 0xb83fffe0 /* MR-SHPC-01 PCMCIA controller */ -#define PA_MRSHPC_MW1 0xb8400000 /* MR-SHPC-01 memory window base */ -#define PA_MRSHPC_MW2 0xb8500000 /* MR-SHPC-01 attribute window base */ -#define PA_MRSHPC_IO 0xb8600000 /* MR-SHPC-01 I/O window base */ -#define MRSHPC_OPTION (PA_MRSHPC + 6) -#define MRSHPC_CSR (PA_MRSHPC + 8) -#define MRSHPC_ISR (PA_MRSHPC + 10) -#define MRSHPC_ICR (PA_MRSHPC + 12) -#define MRSHPC_CPWCR (PA_MRSHPC + 14) -#define MRSHPC_MW0CR1 (PA_MRSHPC + 16) -#define MRSHPC_MW1CR1 (PA_MRSHPC + 18) -#define MRSHPC_IOWCR1 (PA_MRSHPC + 20) -#define MRSHPC_MW0CR2 (PA_MRSHPC + 22) -#define MRSHPC_MW1CR2 (PA_MRSHPC + 24) -#define MRSHPC_IOWCR2 (PA_MRSHPC + 26) -#define MRSHPC_CDCR (PA_MRSHPC + 28) -#define MRSHPC_PCIC_INFO (PA_MRSHPC + 30) - -#define BCR_ILCRA (PA_BCR + 0) -#define BCR_ILCRB (PA_BCR + 2) -#define BCR_ILCRC (PA_BCR + 4) -#define BCR_ILCRD (PA_BCR + 6) -#define BCR_ILCRE (PA_BCR + 8) -#define BCR_ILCRF (PA_BCR + 10) -#define BCR_ILCRG (PA_BCR + 12) - -#if defined(CONFIG_CPU_SUBTYPE_SH7705) -#define IRQ_STNIC 12 -#define IRQ_CFCARD 14 -#else -#define IRQ_STNIC 10 -#define IRQ_CFCARD 7 -#endif - -/* SH Ether support (SH7710/SH7712) */ -/* Base address */ -#define SH_ETH0_BASE 0xA7000000 -#define SH_ETH1_BASE 0xA7000400 -/* PHY ID */ -#if defined(CONFIG_CPU_SUBTYPE_SH7710) -# define PHY_ID 0x00 -#elif defined(CONFIG_CPU_SUBTYPE_SH7712) -# define PHY_ID 0x01 -#endif -/* Ether IRQ */ -#define SH_ETH0_IRQ 80 -#define SH_ETH1_IRQ 81 -#define SH_TSU_IRQ 82 - -void init_se_IRQ(void); - -#define __IO_PREFIX se -#include - -#endif /* __ASM_SH_HITACHI_SE_H */ diff --git a/arch/sh/include/asm/se7206.h b/arch/sh/include/asm/se7206.h deleted file mode 100644 index 698eb80389a..00000000000 --- a/arch/sh/include/asm/se7206.h +++ /dev/null @@ -1,13 +0,0 @@ -#ifndef __ASM_SH_SE7206_H -#define __ASM_SH_SE7206_H - -#define PA_SMSC 0x30000000 -#define PA_MRSHPC 0x34000000 -#define PA_LED 0x31400000 - -void init_se7206_IRQ(void); - -#define __IO_PREFIX se7206 -#include - -#endif /* __ASM_SH_SE7206_H */ diff --git a/arch/sh/include/asm/se7343.h b/arch/sh/include/asm/se7343.h deleted file mode 100644 index 98458460e63..00000000000 --- a/arch/sh/include/asm/se7343.h +++ /dev/null @@ -1,149 +0,0 @@ -#ifndef __ASM_SH_HITACHI_SE7343_H -#define __ASM_SH_HITACHI_SE7343_H - -/* - * include/asm-sh/se/se7343.h - * - * Copyright (C) 2003 Takashi Kusuda - * - * SH-Mobile SolutionEngine 7343 support - */ - -/* Box specific addresses. */ - -/* Area 0 */ -#define PA_ROM 0x00000000 /* EPROM */ -#define PA_ROM_SIZE 0x00400000 /* EPROM size 4M byte(Actually 2MB) */ -#define PA_FROM 0x00400000 /* Flash ROM */ -#define PA_FROM_SIZE 0x00400000 /* Flash size 4M byte */ -#define PA_SRAM 0x00800000 /* SRAM */ -#define PA_FROM_SIZE 0x00400000 /* SRAM size 4M byte */ -/* Area 1 */ -#define PA_EXT1 0x04000000 -#define PA_EXT1_SIZE 0x04000000 -/* Area 2 */ -#define PA_EXT2 0x08000000 -#define PA_EXT2_SIZE 0x04000000 -/* Area 3 */ -#define PA_SDRAM 0x0c000000 -#define PA_SDRAM_SIZE 0x04000000 -/* Area 4 */ -#define PA_PCIC 0x10000000 /* MR-SHPC-01 PCMCIA */ -#define PA_MRSHPC 0xb03fffe0 /* MR-SHPC-01 PCMCIA controller */ -#define PA_MRSHPC_MW1 0xb0400000 /* MR-SHPC-01 memory window base */ -#define PA_MRSHPC_MW2 0xb0500000 /* MR-SHPC-01 attribute window base */ -#define PA_MRSHPC_IO 0xb0600000 /* MR-SHPC-01 I/O window base */ -#define MRSHPC_OPTION (PA_MRSHPC + 6) -#define MRSHPC_CSR (PA_MRSHPC + 8) -#define MRSHPC_ISR (PA_MRSHPC + 10) -#define MRSHPC_ICR (PA_MRSHPC + 12) -#define MRSHPC_CPWCR (PA_MRSHPC + 14) -#define MRSHPC_MW0CR1 (PA_MRSHPC + 16) -#define MRSHPC_MW1CR1 (PA_MRSHPC + 18) -#define MRSHPC_IOWCR1 (PA_MRSHPC + 20) -#define MRSHPC_MW0CR2 (PA_MRSHPC + 22) -#define MRSHPC_MW1CR2 (PA_MRSHPC + 24) -#define MRSHPC_IOWCR2 (PA_MRSHPC + 26) -#define MRSHPC_CDCR (PA_MRSHPC + 28) -#define MRSHPC_PCIC_INFO (PA_MRSHPC + 30) -#define PA_LED 0xb0C00000 /* LED */ -#define LED_SHIFT 0 -#define PA_DIPSW 0xb0900000 /* Dip switch 31 */ -#define PA_CPLD_MODESET 0xb1400004 /* CPLD Mode set register */ -#define PA_CPLD_ST 0xb1400008 /* CPLD Interrupt status register */ -#define PA_CPLD_IMSK 0xb140000a /* CPLD Interrupt mask register */ -/* Area 5 */ -#define PA_EXT5 0x14000000 -#define PA_EXT5_SIZE 0x04000000 -/* Area 6 */ -#define PA_LCD1 0xb8000000 -#define PA_LCD2 0xb8800000 - -#define PORT_PACR 0xA4050100 -#define PORT_PBCR 0xA4050102 -#define PORT_PCCR 0xA4050104 -#define PORT_PDCR 0xA4050106 -#define PORT_PECR 0xA4050108 -#define PORT_PFCR 0xA405010A -#define PORT_PGCR 0xA405010C -#define PORT_PHCR 0xA405010E -#define PORT_PJCR 0xA4050110 -#define PORT_PKCR 0xA4050112 -#define PORT_PLCR 0xA4050114 -#define PORT_PMCR 0xA4050116 -#define PORT_PNCR 0xA4050118 -#define PORT_PQCR 0xA405011A -#define PORT_PRCR 0xA405011C -#define PORT_PSCR 0xA405011E -#define PORT_PTCR 0xA4050140 -#define PORT_PUCR 0xA4050142 -#define PORT_PVCR 0xA4050144 -#define PORT_PWCR 0xA4050146 -#define PORT_PYCR 0xA4050148 -#define PORT_PZCR 0xA405014A - -#define PORT_PSELA 0xA405014C -#define PORT_PSELB 0xA405014E -#define PORT_PSELC 0xA4050150 -#define PORT_PSELD 0xA4050152 -#define PORT_PSELE 0xA4050154 - -#define PORT_HIZCRA 0xA4050156 -#define PORT_HIZCRB 0xA4050158 -#define PORT_HIZCRC 0xA405015C - -#define PORT_DRVCR 0xA4050180 - -#define PORT_PADR 0xA4050120 -#define PORT_PBDR 0xA4050122 -#define PORT_PCDR 0xA4050124 -#define PORT_PDDR 0xA4050126 -#define PORT_PEDR 0xA4050128 -#define PORT_PFDR 0xA405012A -#define PORT_PGDR 0xA405012C -#define PORT_PHDR 0xA405012E -#define PORT_PJDR 0xA4050130 -#define PORT_PKDR 0xA4050132 -#define PORT_PLDR 0xA4050134 -#define PORT_PMDR 0xA4050136 -#define PORT_PNDR 0xA4050138 -#define PORT_PQDR 0xA405013A -#define PORT_PRDR 0xA405013C -#define PORT_PTDR 0xA4050160 -#define PORT_PUDR 0xA4050162 -#define PORT_PVDR 0xA4050164 -#define PORT_PWDR 0xA4050166 -#define PORT_PYDR 0xA4050168 - -#define FPGA_IN 0xb1400000 -#define FPGA_OUT 0xb1400002 - -#define __IO_PREFIX sh7343se -#include - -#define IRQ0_IRQ 32 -#define IRQ1_IRQ 33 -#define IRQ4_IRQ 36 -#define IRQ5_IRQ 37 - -#define SE7343_FPGA_IRQ_MRSHPC0 0 -#define SE7343_FPGA_IRQ_MRSHPC1 1 -#define SE7343_FPGA_IRQ_MRSHPC2 2 -#define SE7343_FPGA_IRQ_MRSHPC3 3 -#define SE7343_FPGA_IRQ_SMC 6 /* EXT_IRQ2 */ -#define SE7343_FPGA_IRQ_USB 8 - -#define SE7343_FPGA_IRQ_NR 11 -#define SE7343_FPGA_IRQ_BASE 120 - -#define MRSHPC_IRQ3 (SE7343_FPGA_IRQ_BASE + SE7343_FPGA_IRQ_MRSHPC3) -#define MRSHPC_IRQ2 (SE7343_FPGA_IRQ_BASE + SE7343_FPGA_IRQ_MRSHPC2) -#define MRSHPC_IRQ1 (SE7343_FPGA_IRQ_BASE + SE7343_FPGA_IRQ_MRSHPC1) -#define MRSHPC_IRQ0 (SE7343_FPGA_IRQ_BASE + SE7343_FPGA_IRQ_MRSHPC0) -#define SMC_IRQ (SE7343_FPGA_IRQ_BASE + SE7343_FPGA_IRQ_SMC) -#define USB_IRQ (SE7343_FPGA_IRQ_BASE + SE7343_FPGA_IRQ_USB) - -/* arch/sh/boards/se/7343/irq.c */ -void init_7343se_IRQ(void); - -#endif /* __ASM_SH_HITACHI_SE7343_H */ diff --git a/arch/sh/include/asm/se7721.h b/arch/sh/include/asm/se7721.h deleted file mode 100644 index b957f604119..00000000000 --- a/arch/sh/include/asm/se7721.h +++ /dev/null @@ -1,70 +0,0 @@ -/* - * Copyright (C) 2008 Renesas Solutions Corp. - * - * Hitachi UL SolutionEngine 7721 Support. - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - */ - -#ifndef __ASM_SH_SE7721_H -#define __ASM_SH_SE7721_H -#include - -/* Box specific addresses. */ -#define SE_AREA0_WIDTH 2 /* Area0: 32bit */ -#define PA_ROM 0xa0000000 /* EPROM */ -#define PA_ROM_SIZE 0x00200000 /* EPROM size 2M byte */ -#define PA_FROM 0xa1000000 /* Flash-ROM */ -#define PA_FROM_SIZE 0x01000000 /* Flash-ROM size 16M byte */ -#define PA_EXT1 0xa4000000 -#define PA_EXT1_SIZE 0x04000000 -#define PA_SDRAM 0xaC000000 /* SDRAM(Area3) 64MB */ -#define PA_SDRAM_SIZE 0x04000000 - -#define PA_EXT4 0xb0000000 -#define PA_EXT4_SIZE 0x04000000 - -#define PA_PERIPHERAL 0xB8000000 - -#define PA_PCIC PA_PERIPHERAL -#define PA_MRSHPC (PA_PERIPHERAL + 0x003fffe0) -#define PA_MRSHPC_MW1 (PA_PERIPHERAL + 0x00400000) -#define PA_MRSHPC_MW2 (PA_PERIPHERAL + 0x00500000) -#define PA_MRSHPC_IO (PA_PERIPHERAL + 0x00600000) -#define MRSHPC_OPTION (PA_MRSHPC + 6) -#define MRSHPC_CSR (PA_MRSHPC + 8) -#define MRSHPC_ISR (PA_MRSHPC + 10) -#define MRSHPC_ICR (PA_MRSHPC + 12) -#define MRSHPC_CPWCR (PA_MRSHPC + 14) -#define MRSHPC_MW0CR1 (PA_MRSHPC + 16) -#define MRSHPC_MW1CR1 (PA_MRSHPC + 18) -#define MRSHPC_IOWCR1 (PA_MRSHPC + 20) -#define MRSHPC_MW0CR2 (PA_MRSHPC + 22) -#define MRSHPC_MW1CR2 (PA_MRSHPC + 24) -#define MRSHPC_IOWCR2 (PA_MRSHPC + 26) -#define MRSHPC_CDCR (PA_MRSHPC + 28) -#define MRSHPC_PCIC_INFO (PA_MRSHPC + 30) - -#define PA_LED 0xB6800000 /* 8bit LED */ -#define PA_FPGA 0xB7000000 /* FPGA base address */ - -#define MRSHPC_IRQ0 10 - -#define FPGA_ILSR1 (PA_FPGA + 0x02) -#define FPGA_ILSR2 (PA_FPGA + 0x03) -#define FPGA_ILSR3 (PA_FPGA + 0x04) -#define FPGA_ILSR4 (PA_FPGA + 0x05) -#define FPGA_ILSR5 (PA_FPGA + 0x06) -#define FPGA_ILSR6 (PA_FPGA + 0x07) -#define FPGA_ILSR7 (PA_FPGA + 0x08) -#define FPGA_ILSR8 (PA_FPGA + 0x09) - -void init_se7721_IRQ(void); - -#define __IO_PREFIX se7721 -#include - -#endif /* __ASM_SH_SE7721_H */ diff --git a/arch/sh/include/asm/se7722.h b/arch/sh/include/asm/se7722.h deleted file mode 100644 index e971d9a82f4..00000000000 --- a/arch/sh/include/asm/se7722.h +++ /dev/null @@ -1,112 +0,0 @@ -#ifndef __ASM_SH_SE7722_H -#define __ASM_SH_SE7722_H - -/* - * linux/include/asm-sh/se7722.h - * - * Copyright (C) 2007 Nobuhiro Iwamatsu - * - * Hitachi UL SolutionEngine 7722 Support. - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - */ -#include - -/* Box specific addresses. */ -#define SE_AREA0_WIDTH 4 /* Area0: 32bit */ -#define PA_ROM 0xa0000000 /* EPROM */ -#define PA_ROM_SIZE 0x00200000 /* EPROM size 2M byte */ -#define PA_FROM 0xa1000000 /* Flash-ROM */ -#define PA_FROM_SIZE 0x01000000 /* Flash-ROM size 16M byte */ -#define PA_EXT1 0xa4000000 -#define PA_EXT1_SIZE 0x04000000 -#define PA_SDRAM 0xaC000000 /* DDR-SDRAM(Area3) 64MB */ -#define PA_SDRAM_SIZE 0x04000000 - -#define PA_EXT4 0xb0000000 -#define PA_EXT4_SIZE 0x04000000 - -#define PA_PERIPHERAL 0xB0000000 - -#define PA_PCIC PA_PERIPHERAL /* MR-SHPC-01 PCMCIA */ -#define PA_MRSHPC (PA_PERIPHERAL + 0x003fffe0) /* MR-SHPC-01 PCMCIA controller */ -#define PA_MRSHPC_MW1 (PA_PERIPHERAL + 0x00400000) /* MR-SHPC-01 memory window base */ -#define PA_MRSHPC_MW2 (PA_PERIPHERAL + 0x00500000) /* MR-SHPC-01 attribute window base */ -#define PA_MRSHPC_IO (PA_PERIPHERAL + 0x00600000) /* MR-SHPC-01 I/O window base */ -#define MRSHPC_OPTION (PA_MRSHPC + 6) -#define MRSHPC_CSR (PA_MRSHPC + 8) -#define MRSHPC_ISR (PA_MRSHPC + 10) -#define MRSHPC_ICR (PA_MRSHPC + 12) -#define MRSHPC_CPWCR (PA_MRSHPC + 14) -#define MRSHPC_MW0CR1 (PA_MRSHPC + 16) -#define MRSHPC_MW1CR1 (PA_MRSHPC + 18) -#define MRSHPC_IOWCR1 (PA_MRSHPC + 20) -#define MRSHPC_MW0CR2 (PA_MRSHPC + 22) -#define MRSHPC_MW1CR2 (PA_MRSHPC + 24) -#define MRSHPC_IOWCR2 (PA_MRSHPC + 26) -#define MRSHPC_CDCR (PA_MRSHPC + 28) -#define MRSHPC_PCIC_INFO (PA_MRSHPC + 30) - -#define PA_LED (PA_PERIPHERAL + 0x00800000) /* 8bit LED */ -#define PA_FPGA (PA_PERIPHERAL + 0x01800000) /* FPGA base address */ - -#define PA_LAN (PA_AREA6_IO + 0) /* SMC LAN91C111 */ -/* GPIO */ -#define FPGA_IN 0xb1840000UL -#define FPGA_OUT 0xb1840004UL - -#define PORT_PECR 0xA4050108UL -#define PORT_PJCR 0xA4050110UL -#define PORT_PSELD 0xA4050154UL -#define PORT_PSELB 0xA4050150UL - -#define PORT_PSELC 0xA4050152UL -#define PORT_PKCR 0xA4050112UL -#define PORT_PHCR 0xA405010EUL -#define PORT_PLCR 0xA4050114UL -#define PORT_PMCR 0xA4050116UL -#define PORT_PRCR 0xA405011CUL -#define PORT_PXCR 0xA4050148UL -#define PORT_PSELA 0xA405014EUL -#define PORT_PYCR 0xA405014AUL -#define PORT_PZCR 0xA405014CUL -#define PORT_HIZCRA 0xA4050158UL -#define PORT_HIZCRC 0xA405015CUL - -/* IRQ */ -#define IRQ0_IRQ 32 -#define IRQ1_IRQ 33 - -#define IRQ01_MODE 0xb1800000 -#define IRQ01_STS 0xb1800004 -#define IRQ01_MASK 0xb1800008 - -/* Bits in IRQ01_* registers */ - -#define SE7722_FPGA_IRQ_USB 0 /* IRQ0 */ -#define SE7722_FPGA_IRQ_SMC 1 /* IRQ0 */ -#define SE7722_FPGA_IRQ_MRSHPC0 2 /* IRQ1 */ -#define SE7722_FPGA_IRQ_MRSHPC1 3 /* IRQ1 */ -#define SE7722_FPGA_IRQ_MRSHPC2 4 /* IRQ1 */ -#define SE7722_FPGA_IRQ_MRSHPC3 5 /* IRQ1 */ - -#define SE7722_FPGA_IRQ_NR 6 -#define SE7722_FPGA_IRQ_BASE 110 - -#define MRSHPC_IRQ3 (SE7722_FPGA_IRQ_BASE + SE7722_FPGA_IRQ_MRSHPC3) -#define MRSHPC_IRQ2 (SE7722_FPGA_IRQ_BASE + SE7722_FPGA_IRQ_MRSHPC2) -#define MRSHPC_IRQ1 (SE7722_FPGA_IRQ_BASE + SE7722_FPGA_IRQ_MRSHPC1) -#define MRSHPC_IRQ0 (SE7722_FPGA_IRQ_BASE + SE7722_FPGA_IRQ_MRSHPC0) -#define SMC_IRQ (SE7722_FPGA_IRQ_BASE + SE7722_FPGA_IRQ_SMC) -#define USB_IRQ (SE7722_FPGA_IRQ_BASE + SE7722_FPGA_IRQ_USB) - -/* arch/sh/boards/se/7722/irq.c */ -void init_se7722_IRQ(void); - -#define __IO_PREFIX se7722 -#include - -#endif /* __ASM_SH_SE7722_H */ diff --git a/arch/sh/include/asm/se7751.h b/arch/sh/include/asm/se7751.h deleted file mode 100644 index b36792ac5d6..00000000000 --- a/arch/sh/include/asm/se7751.h +++ /dev/null @@ -1,73 +0,0 @@ -#ifndef __ASM_SH_HITACHI_7751SE_H -#define __ASM_SH_HITACHI_7751SE_H - -/* - * linux/include/asm-sh/hitachi_7751se.h - * - * Copyright (C) 2000 Kazumoto Kojima - * - * Hitachi SolutionEngine support - - * Modified for 7751 Solution Engine by - * Ian da Silva and Jeremy Siegel, 2001. - */ - -/* Box specific addresses. */ - -#define PA_ROM 0x00000000 /* EPROM */ -#define PA_ROM_SIZE 0x00400000 /* EPROM size 4M byte */ -#define PA_FROM 0x01000000 /* EPROM */ -#define PA_FROM_SIZE 0x00400000 /* EPROM size 4M byte */ -#define PA_EXT1 0x04000000 -#define PA_EXT1_SIZE 0x04000000 -#define PA_EXT2 0x08000000 -#define PA_EXT2_SIZE 0x04000000 -#define PA_SDRAM 0x0c000000 -#define PA_SDRAM_SIZE 0x04000000 - -#define PA_EXT4 0x12000000 -#define PA_EXT4_SIZE 0x02000000 -#define PA_EXT5 0x14000000 -#define PA_EXT5_SIZE 0x04000000 -#define PA_PCIC 0x18000000 /* MR-SHPC-01 PCMCIA */ - -#define PA_DIPSW0 0xb9000000 /* Dip switch 5,6 */ -#define PA_DIPSW1 0xb9000002 /* Dip switch 7,8 */ -#define PA_LED 0xba000000 /* LED */ -#define PA_BCR 0xbb000000 /* FPGA on the MS7751SE01 */ - -#define PA_MRSHPC 0xb83fffe0 /* MR-SHPC-01 PCMCIA controller */ -#define PA_MRSHPC_MW1 0xb8400000 /* MR-SHPC-01 memory window base */ -#define PA_MRSHPC_MW2 0xb8500000 /* MR-SHPC-01 attribute window base */ -#define PA_MRSHPC_IO 0xb8600000 /* MR-SHPC-01 I/O window base */ -#define MRSHPC_MODE (PA_MRSHPC + 4) -#define MRSHPC_OPTION (PA_MRSHPC + 6) -#define MRSHPC_CSR (PA_MRSHPC + 8) -#define MRSHPC_ISR (PA_MRSHPC + 10) -#define MRSHPC_ICR (PA_MRSHPC + 12) -#define MRSHPC_CPWCR (PA_MRSHPC + 14) -#define MRSHPC_MW0CR1 (PA_MRSHPC + 16) -#define MRSHPC_MW1CR1 (PA_MRSHPC + 18) -#define MRSHPC_IOWCR1 (PA_MRSHPC + 20) -#define MRSHPC_MW0CR2 (PA_MRSHPC + 22) -#define MRSHPC_MW1CR2 (PA_MRSHPC + 24) -#define MRSHPC_IOWCR2 (PA_MRSHPC + 26) -#define MRSHPC_CDCR (PA_MRSHPC + 28) -#define MRSHPC_PCIC_INFO (PA_MRSHPC + 30) - -#define BCR_ILCRA (PA_BCR + 0) -#define BCR_ILCRB (PA_BCR + 2) -#define BCR_ILCRC (PA_BCR + 4) -#define BCR_ILCRD (PA_BCR + 6) -#define BCR_ILCRE (PA_BCR + 8) -#define BCR_ILCRF (PA_BCR + 10) -#define BCR_ILCRG (PA_BCR + 12) - -#define IRQ_79C973 13 - -void init_7751se_IRQ(void); - -#define __IO_PREFIX sh7751se -#include - -#endif /* __ASM_SH_HITACHI_7751SE_H */ diff --git a/arch/sh/include/asm/se7780.h b/arch/sh/include/asm/se7780.h deleted file mode 100644 index 40e9b41458c..00000000000 --- a/arch/sh/include/asm/se7780.h +++ /dev/null @@ -1,108 +0,0 @@ -#ifndef __ASM_SH_SE7780_H -#define __ASM_SH_SE7780_H - -/* - * linux/include/asm-sh/se7780.h - * - * Copyright (C) 2006,2007 Nobuhiro Iwamatsu - * - * Hitachi UL SolutionEngine 7780 Support. - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ -#include - -/* Box specific addresses. */ -#define SE_AREA0_WIDTH 4 /* Area0: 32bit */ -#define PA_ROM 0xa0000000 /* EPROM */ -#define PA_ROM_SIZE 0x00400000 /* EPROM size 4M byte */ -#define PA_FROM 0xa1000000 /* Flash-ROM */ -#define PA_FROM_SIZE 0x01000000 /* Flash-ROM size 16M byte */ -#define PA_EXT1 0xa4000000 -#define PA_EXT1_SIZE 0x04000000 -#define PA_SM501 PA_EXT1 /* Graphic IC (SM501) */ -#define PA_SM501_SIZE PA_EXT1_SIZE /* Graphic IC (SM501) */ -#define PA_SDRAM 0xa8000000 /* DDR-SDRAM(Area2/3) 128MB */ -#define PA_SDRAM_SIZE 0x08000000 - -#define PA_EXT4 0xb0000000 -#define PA_EXT4_SIZE 0x04000000 -#define PA_EXT_FLASH PA_EXT4 /* Expansion Flash-ROM */ - -#define PA_PERIPHERAL PA_AREA6_IO /* SW6-6=ON */ - -#define PA_LAN (PA_PERIPHERAL + 0) /* SMC LAN91C111 */ -#define PA_LED_DISP (PA_PERIPHERAL + 0x02000000) /* 8words LED Display */ -#define DISP_CHAR_RAM (7 << 3) -#define DISP_SEL0_ADDR (DISP_CHAR_RAM + 0) -#define DISP_SEL1_ADDR (DISP_CHAR_RAM + 1) -#define DISP_SEL2_ADDR (DISP_CHAR_RAM + 2) -#define DISP_SEL3_ADDR (DISP_CHAR_RAM + 3) -#define DISP_SEL4_ADDR (DISP_CHAR_RAM + 4) -#define DISP_SEL5_ADDR (DISP_CHAR_RAM + 5) -#define DISP_SEL6_ADDR (DISP_CHAR_RAM + 6) -#define DISP_SEL7_ADDR (DISP_CHAR_RAM + 7) - -#define DISP_UDC_RAM (5 << 3) -#define PA_FPGA (PA_PERIPHERAL + 0x03000000) /* FPGA base address */ - -/* FPGA register address and bit */ -#define FPGA_SFTRST (PA_FPGA + 0) /* Soft reset register */ -#define FPGA_INTMSK1 (PA_FPGA + 2) /* Interrupt Mask register 1 */ -#define FPGA_INTMSK2 (PA_FPGA + 4) /* Interrupt Mask register 2 */ -#define FPGA_INTSEL1 (PA_FPGA + 6) /* Interrupt select register 1 */ -#define FPGA_INTSEL2 (PA_FPGA + 8) /* Interrupt select register 2 */ -#define FPGA_INTSEL3 (PA_FPGA + 10) /* Interrupt select register 3 */ -#define FPGA_PCI_INTSEL1 (PA_FPGA + 12) /* PCI Interrupt select register 1 */ -#define FPGA_PCI_INTSEL2 (PA_FPGA + 14) /* PCI Interrupt select register 2 */ -#define FPGA_INTSET (PA_FPGA + 16) /* IRQ/IRL select register */ -#define FPGA_INTSTS1 (PA_FPGA + 18) /* Interrupt status register 1 */ -#define FPGA_INTSTS2 (PA_FPGA + 20) /* Interrupt status register 2 */ -#define FPGA_REQSEL (PA_FPGA + 22) /* REQ/GNT select register */ -#define FPGA_DBG_LED (PA_FPGA + 32) /* Debug LED(D-LED[8:1] */ -#define PA_LED FPGA_DBG_LED -#define FPGA_IVDRID (PA_FPGA + 36) /* iVDR ID Register */ -#define FPGA_IVDRPW (PA_FPGA + 38) /* iVDR Power ON Register */ -#define FPGA_MMCID (PA_FPGA + 40) /* MMC ID Register */ - -/* FPGA INTSEL position */ -/* INTSEL1 */ -#define IRQPOS_SMC91CX (0 * 4) -#define IRQPOS_SM501 (1 * 4) -/* INTSEL2 */ -#define IRQPOS_EXTINT1 (0 * 4) -#define IRQPOS_EXTINT2 (1 * 4) -#define IRQPOS_EXTINT3 (2 * 4) -#define IRQPOS_EXTINT4 (3 * 4) -/* INTSEL3 */ -#define IRQPOS_PCCPW (0 * 4) - -/* IDE interrupt */ -#define IRQ_IDE0 67 /* iVDR */ - -/* SMC interrupt */ -#define SMC_IRQ 8 - -/* SM501 interrupt */ -#define SM501_IRQ 0 - -/* interrupt pin */ -#define IRQPIN_EXTINT1 0 /* IRQ0 pin */ -#define IRQPIN_EXTINT2 1 /* IRQ1 pin */ -#define IRQPIN_EXTINT3 2 /* IRQ2 pin */ -#define IRQPIN_SMC91CX 3 /* IRQ3 pin */ -#define IRQPIN_EXTINT4 4 /* IRQ4 pin */ -#define IRQPIN_PCC0 5 /* IRQ5 pin */ -#define IRQPIN_PCC2 6 /* IRQ6 pin */ -#define IRQPIN_SM501 7 /* IRQ7 pin */ -#define IRQPIN_PCCPW 7 /* IRQ7 pin */ - -/* arch/sh/boards/se/7780/irq.c */ -void init_se7780_IRQ(void); - -#define __IO_PREFIX se7780 -#include - -#endif /* __ASM_SH_SE7780_H */ diff --git a/arch/sh/include/mach-se/mach/se.h b/arch/sh/include/mach-se/mach/se.h new file mode 100644 index 00000000000..eb23000e1bb --- /dev/null +++ b/arch/sh/include/mach-se/mach/se.h @@ -0,0 +1,99 @@ +#ifndef __ASM_SH_HITACHI_SE_H +#define __ASM_SH_HITACHI_SE_H + +/* + * linux/include/asm-sh/hitachi_se.h + * + * Copyright (C) 2000 Kazumoto Kojima + * + * Hitachi SolutionEngine support + */ + +/* Box specific addresses. */ + +#define PA_ROM 0x00000000 /* EPROM */ +#define PA_ROM_SIZE 0x00400000 /* EPROM size 4M byte */ +#define PA_FROM 0x01000000 /* EPROM */ +#define PA_FROM_SIZE 0x00400000 /* EPROM size 4M byte */ +#define PA_EXT1 0x04000000 +#define PA_EXT1_SIZE 0x04000000 +#define PA_EXT2 0x08000000 +#define PA_EXT2_SIZE 0x04000000 +#define PA_SDRAM 0x0c000000 +#define PA_SDRAM_SIZE 0x04000000 + +#define PA_EXT4 0x12000000 +#define PA_EXT4_SIZE 0x02000000 +#define PA_EXT5 0x14000000 +#define PA_EXT5_SIZE 0x04000000 +#define PA_PCIC 0x18000000 /* MR-SHPC-01 PCMCIA */ + +#define PA_83902 0xb0000000 /* DP83902A */ +#define PA_83902_IF 0xb0040000 /* DP83902A remote io port */ +#define PA_83902_RST 0xb0080000 /* DP83902A reset port */ + +#define PA_SUPERIO 0xb0400000 /* SMC37C935A super io chip */ +#define PA_DIPSW0 0xb0800000 /* Dip switch 5,6 */ +#define PA_DIPSW1 0xb0800002 /* Dip switch 7,8 */ +#define PA_LED 0xb0c00000 /* LED */ +#if defined(CONFIG_CPU_SUBTYPE_SH7705) +#define PA_BCR 0xb0e00000 +#else +#define PA_BCR 0xb1400000 /* FPGA */ +#endif + +#define PA_MRSHPC 0xb83fffe0 /* MR-SHPC-01 PCMCIA controller */ +#define PA_MRSHPC_MW1 0xb8400000 /* MR-SHPC-01 memory window base */ +#define PA_MRSHPC_MW2 0xb8500000 /* MR-SHPC-01 attribute window base */ +#define PA_MRSHPC_IO 0xb8600000 /* MR-SHPC-01 I/O window base */ +#define MRSHPC_OPTION (PA_MRSHPC + 6) +#define MRSHPC_CSR (PA_MRSHPC + 8) +#define MRSHPC_ISR (PA_MRSHPC + 10) +#define MRSHPC_ICR (PA_MRSHPC + 12) +#define MRSHPC_CPWCR (PA_MRSHPC + 14) +#define MRSHPC_MW0CR1 (PA_MRSHPC + 16) +#define MRSHPC_MW1CR1 (PA_MRSHPC + 18) +#define MRSHPC_IOWCR1 (PA_MRSHPC + 20) +#define MRSHPC_MW0CR2 (PA_MRSHPC + 22) +#define MRSHPC_MW1CR2 (PA_MRSHPC + 24) +#define MRSHPC_IOWCR2 (PA_MRSHPC + 26) +#define MRSHPC_CDCR (PA_MRSHPC + 28) +#define MRSHPC_PCIC_INFO (PA_MRSHPC + 30) + +#define BCR_ILCRA (PA_BCR + 0) +#define BCR_ILCRB (PA_BCR + 2) +#define BCR_ILCRC (PA_BCR + 4) +#define BCR_ILCRD (PA_BCR + 6) +#define BCR_ILCRE (PA_BCR + 8) +#define BCR_ILCRF (PA_BCR + 10) +#define BCR_ILCRG (PA_BCR + 12) + +#if defined(CONFIG_CPU_SUBTYPE_SH7705) +#define IRQ_STNIC 12 +#define IRQ_CFCARD 14 +#else +#define IRQ_STNIC 10 +#define IRQ_CFCARD 7 +#endif + +/* SH Ether support (SH7710/SH7712) */ +/* Base address */ +#define SH_ETH0_BASE 0xA7000000 +#define SH_ETH1_BASE 0xA7000400 +/* PHY ID */ +#if defined(CONFIG_CPU_SUBTYPE_SH7710) +# define PHY_ID 0x00 +#elif defined(CONFIG_CPU_SUBTYPE_SH7712) +# define PHY_ID 0x01 +#endif +/* Ether IRQ */ +#define SH_ETH0_IRQ 80 +#define SH_ETH1_IRQ 81 +#define SH_TSU_IRQ 82 + +void init_se_IRQ(void); + +#define __IO_PREFIX se +#include + +#endif /* __ASM_SH_HITACHI_SE_H */ diff --git a/arch/sh/include/mach-se/mach/se7206.h b/arch/sh/include/mach-se/mach/se7206.h new file mode 100644 index 00000000000..698eb80389a --- /dev/null +++ b/arch/sh/include/mach-se/mach/se7206.h @@ -0,0 +1,13 @@ +#ifndef __ASM_SH_SE7206_H +#define __ASM_SH_SE7206_H + +#define PA_SMSC 0x30000000 +#define PA_MRSHPC 0x34000000 +#define PA_LED 0x31400000 + +void init_se7206_IRQ(void); + +#define __IO_PREFIX se7206 +#include + +#endif /* __ASM_SH_SE7206_H */ diff --git a/arch/sh/include/mach-se/mach/se7343.h b/arch/sh/include/mach-se/mach/se7343.h new file mode 100644 index 00000000000..98458460e63 --- /dev/null +++ b/arch/sh/include/mach-se/mach/se7343.h @@ -0,0 +1,149 @@ +#ifndef __ASM_SH_HITACHI_SE7343_H +#define __ASM_SH_HITACHI_SE7343_H + +/* + * include/asm-sh/se/se7343.h + * + * Copyright (C) 2003 Takashi Kusuda + * + * SH-Mobile SolutionEngine 7343 support + */ + +/* Box specific addresses. */ + +/* Area 0 */ +#define PA_ROM 0x00000000 /* EPROM */ +#define PA_ROM_SIZE 0x00400000 /* EPROM size 4M byte(Actually 2MB) */ +#define PA_FROM 0x00400000 /* Flash ROM */ +#define PA_FROM_SIZE 0x00400000 /* Flash size 4M byte */ +#define PA_SRAM 0x00800000 /* SRAM */ +#define PA_FROM_SIZE 0x00400000 /* SRAM size 4M byte */ +/* Area 1 */ +#define PA_EXT1 0x04000000 +#define PA_EXT1_SIZE 0x04000000 +/* Area 2 */ +#define PA_EXT2 0x08000000 +#define PA_EXT2_SIZE 0x04000000 +/* Area 3 */ +#define PA_SDRAM 0x0c000000 +#define PA_SDRAM_SIZE 0x04000000 +/* Area 4 */ +#define PA_PCIC 0x10000000 /* MR-SHPC-01 PCMCIA */ +#define PA_MRSHPC 0xb03fffe0 /* MR-SHPC-01 PCMCIA controller */ +#define PA_MRSHPC_MW1 0xb0400000 /* MR-SHPC-01 memory window base */ +#define PA_MRSHPC_MW2 0xb0500000 /* MR-SHPC-01 attribute window base */ +#define PA_MRSHPC_IO 0xb0600000 /* MR-SHPC-01 I/O window base */ +#define MRSHPC_OPTION (PA_MRSHPC + 6) +#define MRSHPC_CSR (PA_MRSHPC + 8) +#define MRSHPC_ISR (PA_MRSHPC + 10) +#define MRSHPC_ICR (PA_MRSHPC + 12) +#define MRSHPC_CPWCR (PA_MRSHPC + 14) +#define MRSHPC_MW0CR1 (PA_MRSHPC + 16) +#define MRSHPC_MW1CR1 (PA_MRSHPC + 18) +#define MRSHPC_IOWCR1 (PA_MRSHPC + 20) +#define MRSHPC_MW0CR2 (PA_MRSHPC + 22) +#define MRSHPC_MW1CR2 (PA_MRSHPC + 24) +#define MRSHPC_IOWCR2 (PA_MRSHPC + 26) +#define MRSHPC_CDCR (PA_MRSHPC + 28) +#define MRSHPC_PCIC_INFO (PA_MRSHPC + 30) +#define PA_LED 0xb0C00000 /* LED */ +#define LED_SHIFT 0 +#define PA_DIPSW 0xb0900000 /* Dip switch 31 */ +#define PA_CPLD_MODESET 0xb1400004 /* CPLD Mode set register */ +#define PA_CPLD_ST 0xb1400008 /* CPLD Interrupt status register */ +#define PA_CPLD_IMSK 0xb140000a /* CPLD Interrupt mask register */ +/* Area 5 */ +#define PA_EXT5 0x14000000 +#define PA_EXT5_SIZE 0x04000000 +/* Area 6 */ +#define PA_LCD1 0xb8000000 +#define PA_LCD2 0xb8800000 + +#define PORT_PACR 0xA4050100 +#define PORT_PBCR 0xA4050102 +#define PORT_PCCR 0xA4050104 +#define PORT_PDCR 0xA4050106 +#define PORT_PECR 0xA4050108 +#define PORT_PFCR 0xA405010A +#define PORT_PGCR 0xA405010C +#define PORT_PHCR 0xA405010E +#define PORT_PJCR 0xA4050110 +#define PORT_PKCR 0xA4050112 +#define PORT_PLCR 0xA4050114 +#define PORT_PMCR 0xA4050116 +#define PORT_PNCR 0xA4050118 +#define PORT_PQCR 0xA405011A +#define PORT_PRCR 0xA405011C +#define PORT_PSCR 0xA405011E +#define PORT_PTCR 0xA4050140 +#define PORT_PUCR 0xA4050142 +#define PORT_PVCR 0xA4050144 +#define PORT_PWCR 0xA4050146 +#define PORT_PYCR 0xA4050148 +#define PORT_PZCR 0xA405014A + +#define PORT_PSELA 0xA405014C +#define PORT_PSELB 0xA405014E +#define PORT_PSELC 0xA4050150 +#define PORT_PSELD 0xA4050152 +#define PORT_PSELE 0xA4050154 + +#define PORT_HIZCRA 0xA4050156 +#define PORT_HIZCRB 0xA4050158 +#define PORT_HIZCRC 0xA405015C + +#define PORT_DRVCR 0xA4050180 + +#define PORT_PADR 0xA4050120 +#define PORT_PBDR 0xA4050122 +#define PORT_PCDR 0xA4050124 +#define PORT_PDDR 0xA4050126 +#define PORT_PEDR 0xA4050128 +#define PORT_PFDR 0xA405012A +#define PORT_PGDR 0xA405012C +#define PORT_PHDR 0xA405012E +#define PORT_PJDR 0xA4050130 +#define PORT_PKDR 0xA4050132 +#define PORT_PLDR 0xA4050134 +#define PORT_PMDR 0xA4050136 +#define PORT_PNDR 0xA4050138 +#define PORT_PQDR 0xA405013A +#define PORT_PRDR 0xA405013C +#define PORT_PTDR 0xA4050160 +#define PORT_PUDR 0xA4050162 +#define PORT_PVDR 0xA4050164 +#define PORT_PWDR 0xA4050166 +#define PORT_PYDR 0xA4050168 + +#define FPGA_IN 0xb1400000 +#define FPGA_OUT 0xb1400002 + +#define __IO_PREFIX sh7343se +#include + +#define IRQ0_IRQ 32 +#define IRQ1_IRQ 33 +#define IRQ4_IRQ 36 +#define IRQ5_IRQ 37 + +#define SE7343_FPGA_IRQ_MRSHPC0 0 +#define SE7343_FPGA_IRQ_MRSHPC1 1 +#define SE7343_FPGA_IRQ_MRSHPC2 2 +#define SE7343_FPGA_IRQ_MRSHPC3 3 +#define SE7343_FPGA_IRQ_SMC 6 /* EXT_IRQ2 */ +#define SE7343_FPGA_IRQ_USB 8 + +#define SE7343_FPGA_IRQ_NR 11 +#define SE7343_FPGA_IRQ_BASE 120 + +#define MRSHPC_IRQ3 (SE7343_FPGA_IRQ_BASE + SE7343_FPGA_IRQ_MRSHPC3) +#define MRSHPC_IRQ2 (SE7343_FPGA_IRQ_BASE + SE7343_FPGA_IRQ_MRSHPC2) +#define MRSHPC_IRQ1 (SE7343_FPGA_IRQ_BASE + SE7343_FPGA_IRQ_MRSHPC1) +#define MRSHPC_IRQ0 (SE7343_FPGA_IRQ_BASE + SE7343_FPGA_IRQ_MRSHPC0) +#define SMC_IRQ (SE7343_FPGA_IRQ_BASE + SE7343_FPGA_IRQ_SMC) +#define USB_IRQ (SE7343_FPGA_IRQ_BASE + SE7343_FPGA_IRQ_USB) + +/* arch/sh/boards/se/7343/irq.c */ +void init_7343se_IRQ(void); + +#endif /* __ASM_SH_HITACHI_SE7343_H */ diff --git a/arch/sh/include/mach-se/mach/se7721.h b/arch/sh/include/mach-se/mach/se7721.h new file mode 100644 index 00000000000..b957f604119 --- /dev/null +++ b/arch/sh/include/mach-se/mach/se7721.h @@ -0,0 +1,70 @@ +/* + * Copyright (C) 2008 Renesas Solutions Corp. + * + * Hitachi UL SolutionEngine 7721 Support. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + */ + +#ifndef __ASM_SH_SE7721_H +#define __ASM_SH_SE7721_H +#include + +/* Box specific addresses. */ +#define SE_AREA0_WIDTH 2 /* Area0: 32bit */ +#define PA_ROM 0xa0000000 /* EPROM */ +#define PA_ROM_SIZE 0x00200000 /* EPROM size 2M byte */ +#define PA_FROM 0xa1000000 /* Flash-ROM */ +#define PA_FROM_SIZE 0x01000000 /* Flash-ROM size 16M byte */ +#define PA_EXT1 0xa4000000 +#define PA_EXT1_SIZE 0x04000000 +#define PA_SDRAM 0xaC000000 /* SDRAM(Area3) 64MB */ +#define PA_SDRAM_SIZE 0x04000000 + +#define PA_EXT4 0xb0000000 +#define PA_EXT4_SIZE 0x04000000 + +#define PA_PERIPHERAL 0xB8000000 + +#define PA_PCIC PA_PERIPHERAL +#define PA_MRSHPC (PA_PERIPHERAL + 0x003fffe0) +#define PA_MRSHPC_MW1 (PA_PERIPHERAL + 0x00400000) +#define PA_MRSHPC_MW2 (PA_PERIPHERAL + 0x00500000) +#define PA_MRSHPC_IO (PA_PERIPHERAL + 0x00600000) +#define MRSHPC_OPTION (PA_MRSHPC + 6) +#define MRSHPC_CSR (PA_MRSHPC + 8) +#define MRSHPC_ISR (PA_MRSHPC + 10) +#define MRSHPC_ICR (PA_MRSHPC + 12) +#define MRSHPC_CPWCR (PA_MRSHPC + 14) +#define MRSHPC_MW0CR1 (PA_MRSHPC + 16) +#define MRSHPC_MW1CR1 (PA_MRSHPC + 18) +#define MRSHPC_IOWCR1 (PA_MRSHPC + 20) +#define MRSHPC_MW0CR2 (PA_MRSHPC + 22) +#define MRSHPC_MW1CR2 (PA_MRSHPC + 24) +#define MRSHPC_IOWCR2 (PA_MRSHPC + 26) +#define MRSHPC_CDCR (PA_MRSHPC + 28) +#define MRSHPC_PCIC_INFO (PA_MRSHPC + 30) + +#define PA_LED 0xB6800000 /* 8bit LED */ +#define PA_FPGA 0xB7000000 /* FPGA base address */ + +#define MRSHPC_IRQ0 10 + +#define FPGA_ILSR1 (PA_FPGA + 0x02) +#define FPGA_ILSR2 (PA_FPGA + 0x03) +#define FPGA_ILSR3 (PA_FPGA + 0x04) +#define FPGA_ILSR4 (PA_FPGA + 0x05) +#define FPGA_ILSR5 (PA_FPGA + 0x06) +#define FPGA_ILSR6 (PA_FPGA + 0x07) +#define FPGA_ILSR7 (PA_FPGA + 0x08) +#define FPGA_ILSR8 (PA_FPGA + 0x09) + +void init_se7721_IRQ(void); + +#define __IO_PREFIX se7721 +#include + +#endif /* __ASM_SH_SE7721_H */ diff --git a/arch/sh/include/mach-se/mach/se7722.h b/arch/sh/include/mach-se/mach/se7722.h new file mode 100644 index 00000000000..e971d9a82f4 --- /dev/null +++ b/arch/sh/include/mach-se/mach/se7722.h @@ -0,0 +1,112 @@ +#ifndef __ASM_SH_SE7722_H +#define __ASM_SH_SE7722_H + +/* + * linux/include/asm-sh/se7722.h + * + * Copyright (C) 2007 Nobuhiro Iwamatsu + * + * Hitachi UL SolutionEngine 7722 Support. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + */ +#include + +/* Box specific addresses. */ +#define SE_AREA0_WIDTH 4 /* Area0: 32bit */ +#define PA_ROM 0xa0000000 /* EPROM */ +#define PA_ROM_SIZE 0x00200000 /* EPROM size 2M byte */ +#define PA_FROM 0xa1000000 /* Flash-ROM */ +#define PA_FROM_SIZE 0x01000000 /* Flash-ROM size 16M byte */ +#define PA_EXT1 0xa4000000 +#define PA_EXT1_SIZE 0x04000000 +#define PA_SDRAM 0xaC000000 /* DDR-SDRAM(Area3) 64MB */ +#define PA_SDRAM_SIZE 0x04000000 + +#define PA_EXT4 0xb0000000 +#define PA_EXT4_SIZE 0x04000000 + +#define PA_PERIPHERAL 0xB0000000 + +#define PA_PCIC PA_PERIPHERAL /* MR-SHPC-01 PCMCIA */ +#define PA_MRSHPC (PA_PERIPHERAL + 0x003fffe0) /* MR-SHPC-01 PCMCIA controller */ +#define PA_MRSHPC_MW1 (PA_PERIPHERAL + 0x00400000) /* MR-SHPC-01 memory window base */ +#define PA_MRSHPC_MW2 (PA_PERIPHERAL + 0x00500000) /* MR-SHPC-01 attribute window base */ +#define PA_MRSHPC_IO (PA_PERIPHERAL + 0x00600000) /* MR-SHPC-01 I/O window base */ +#define MRSHPC_OPTION (PA_MRSHPC + 6) +#define MRSHPC_CSR (PA_MRSHPC + 8) +#define MRSHPC_ISR (PA_MRSHPC + 10) +#define MRSHPC_ICR (PA_MRSHPC + 12) +#define MRSHPC_CPWCR (PA_MRSHPC + 14) +#define MRSHPC_MW0CR1 (PA_MRSHPC + 16) +#define MRSHPC_MW1CR1 (PA_MRSHPC + 18) +#define MRSHPC_IOWCR1 (PA_MRSHPC + 20) +#define MRSHPC_MW0CR2 (PA_MRSHPC + 22) +#define MRSHPC_MW1CR2 (PA_MRSHPC + 24) +#define MRSHPC_IOWCR2 (PA_MRSHPC + 26) +#define MRSHPC_CDCR (PA_MRSHPC + 28) +#define MRSHPC_PCIC_INFO (PA_MRSHPC + 30) + +#define PA_LED (PA_PERIPHERAL + 0x00800000) /* 8bit LED */ +#define PA_FPGA (PA_PERIPHERAL + 0x01800000) /* FPGA base address */ + +#define PA_LAN (PA_AREA6_IO + 0) /* SMC LAN91C111 */ +/* GPIO */ +#define FPGA_IN 0xb1840000UL +#define FPGA_OUT 0xb1840004UL + +#define PORT_PECR 0xA4050108UL +#define PORT_PJCR 0xA4050110UL +#define PORT_PSELD 0xA4050154UL +#define PORT_PSELB 0xA4050150UL + +#define PORT_PSELC 0xA4050152UL +#define PORT_PKCR 0xA4050112UL +#define PORT_PHCR 0xA405010EUL +#define PORT_PLCR 0xA4050114UL +#define PORT_PMCR 0xA4050116UL +#define PORT_PRCR 0xA405011CUL +#define PORT_PXCR 0xA4050148UL +#define PORT_PSELA 0xA405014EUL +#define PORT_PYCR 0xA405014AUL +#define PORT_PZCR 0xA405014CUL +#define PORT_HIZCRA 0xA4050158UL +#define PORT_HIZCRC 0xA405015CUL + +/* IRQ */ +#define IRQ0_IRQ 32 +#define IRQ1_IRQ 33 + +#define IRQ01_MODE 0xb1800000 +#define IRQ01_STS 0xb1800004 +#define IRQ01_MASK 0xb1800008 + +/* Bits in IRQ01_* registers */ + +#define SE7722_FPGA_IRQ_USB 0 /* IRQ0 */ +#define SE7722_FPGA_IRQ_SMC 1 /* IRQ0 */ +#define SE7722_FPGA_IRQ_MRSHPC0 2 /* IRQ1 */ +#define SE7722_FPGA_IRQ_MRSHPC1 3 /* IRQ1 */ +#define SE7722_FPGA_IRQ_MRSHPC2 4 /* IRQ1 */ +#define SE7722_FPGA_IRQ_MRSHPC3 5 /* IRQ1 */ + +#define SE7722_FPGA_IRQ_NR 6 +#define SE7722_FPGA_IRQ_BASE 110 + +#define MRSHPC_IRQ3 (SE7722_FPGA_IRQ_BASE + SE7722_FPGA_IRQ_MRSHPC3) +#define MRSHPC_IRQ2 (SE7722_FPGA_IRQ_BASE + SE7722_FPGA_IRQ_MRSHPC2) +#define MRSHPC_IRQ1 (SE7722_FPGA_IRQ_BASE + SE7722_FPGA_IRQ_MRSHPC1) +#define MRSHPC_IRQ0 (SE7722_FPGA_IRQ_BASE + SE7722_FPGA_IRQ_MRSHPC0) +#define SMC_IRQ (SE7722_FPGA_IRQ_BASE + SE7722_FPGA_IRQ_SMC) +#define USB_IRQ (SE7722_FPGA_IRQ_BASE + SE7722_FPGA_IRQ_USB) + +/* arch/sh/boards/se/7722/irq.c */ +void init_se7722_IRQ(void); + +#define __IO_PREFIX se7722 +#include + +#endif /* __ASM_SH_SE7722_H */ diff --git a/arch/sh/include/mach-se/mach/se7751.h b/arch/sh/include/mach-se/mach/se7751.h new file mode 100644 index 00000000000..b36792ac5d6 --- /dev/null +++ b/arch/sh/include/mach-se/mach/se7751.h @@ -0,0 +1,73 @@ +#ifndef __ASM_SH_HITACHI_7751SE_H +#define __ASM_SH_HITACHI_7751SE_H + +/* + * linux/include/asm-sh/hitachi_7751se.h + * + * Copyright (C) 2000 Kazumoto Kojima + * + * Hitachi SolutionEngine support + + * Modified for 7751 Solution Engine by + * Ian da Silva and Jeremy Siegel, 2001. + */ + +/* Box specific addresses. */ + +#define PA_ROM 0x00000000 /* EPROM */ +#define PA_ROM_SIZE 0x00400000 /* EPROM size 4M byte */ +#define PA_FROM 0x01000000 /* EPROM */ +#define PA_FROM_SIZE 0x00400000 /* EPROM size 4M byte */ +#define PA_EXT1 0x04000000 +#define PA_EXT1_SIZE 0x04000000 +#define PA_EXT2 0x08000000 +#define PA_EXT2_SIZE 0x04000000 +#define PA_SDRAM 0x0c000000 +#define PA_SDRAM_SIZE 0x04000000 + +#define PA_EXT4 0x12000000 +#define PA_EXT4_SIZE 0x02000000 +#define PA_EXT5 0x14000000 +#define PA_EXT5_SIZE 0x04000000 +#define PA_PCIC 0x18000000 /* MR-SHPC-01 PCMCIA */ + +#define PA_DIPSW0 0xb9000000 /* Dip switch 5,6 */ +#define PA_DIPSW1 0xb9000002 /* Dip switch 7,8 */ +#define PA_LED 0xba000000 /* LED */ +#define PA_BCR 0xbb000000 /* FPGA on the MS7751SE01 */ + +#define PA_MRSHPC 0xb83fffe0 /* MR-SHPC-01 PCMCIA controller */ +#define PA_MRSHPC_MW1 0xb8400000 /* MR-SHPC-01 memory window base */ +#define PA_MRSHPC_MW2 0xb8500000 /* MR-SHPC-01 attribute window base */ +#define PA_MRSHPC_IO 0xb8600000 /* MR-SHPC-01 I/O window base */ +#define MRSHPC_MODE (PA_MRSHPC + 4) +#define MRSHPC_OPTION (PA_MRSHPC + 6) +#define MRSHPC_CSR (PA_MRSHPC + 8) +#define MRSHPC_ISR (PA_MRSHPC + 10) +#define MRSHPC_ICR (PA_MRSHPC + 12) +#define MRSHPC_CPWCR (PA_MRSHPC + 14) +#define MRSHPC_MW0CR1 (PA_MRSHPC + 16) +#define MRSHPC_MW1CR1 (PA_MRSHPC + 18) +#define MRSHPC_IOWCR1 (PA_MRSHPC + 20) +#define MRSHPC_MW0CR2 (PA_MRSHPC + 22) +#define MRSHPC_MW1CR2 (PA_MRSHPC + 24) +#define MRSHPC_IOWCR2 (PA_MRSHPC + 26) +#define MRSHPC_CDCR (PA_MRSHPC + 28) +#define MRSHPC_PCIC_INFO (PA_MRSHPC + 30) + +#define BCR_ILCRA (PA_BCR + 0) +#define BCR_ILCRB (PA_BCR + 2) +#define BCR_ILCRC (PA_BCR + 4) +#define BCR_ILCRD (PA_BCR + 6) +#define BCR_ILCRE (PA_BCR + 8) +#define BCR_ILCRF (PA_BCR + 10) +#define BCR_ILCRG (PA_BCR + 12) + +#define IRQ_79C973 13 + +void init_7751se_IRQ(void); + +#define __IO_PREFIX sh7751se +#include + +#endif /* __ASM_SH_HITACHI_7751SE_H */ diff --git a/arch/sh/include/mach-se/mach/se7780.h b/arch/sh/include/mach-se/mach/se7780.h new file mode 100644 index 00000000000..40e9b41458c --- /dev/null +++ b/arch/sh/include/mach-se/mach/se7780.h @@ -0,0 +1,108 @@ +#ifndef __ASM_SH_SE7780_H +#define __ASM_SH_SE7780_H + +/* + * linux/include/asm-sh/se7780.h + * + * Copyright (C) 2006,2007 Nobuhiro Iwamatsu + * + * Hitachi UL SolutionEngine 7780 Support. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include + +/* Box specific addresses. */ +#define SE_AREA0_WIDTH 4 /* Area0: 32bit */ +#define PA_ROM 0xa0000000 /* EPROM */ +#define PA_ROM_SIZE 0x00400000 /* EPROM size 4M byte */ +#define PA_FROM 0xa1000000 /* Flash-ROM */ +#define PA_FROM_SIZE 0x01000000 /* Flash-ROM size 16M byte */ +#define PA_EXT1 0xa4000000 +#define PA_EXT1_SIZE 0x04000000 +#define PA_SM501 PA_EXT1 /* Graphic IC (SM501) */ +#define PA_SM501_SIZE PA_EXT1_SIZE /* Graphic IC (SM501) */ +#define PA_SDRAM 0xa8000000 /* DDR-SDRAM(Area2/3) 128MB */ +#define PA_SDRAM_SIZE 0x08000000 + +#define PA_EXT4 0xb0000000 +#define PA_EXT4_SIZE 0x04000000 +#define PA_EXT_FLASH PA_EXT4 /* Expansion Flash-ROM */ + +#define PA_PERIPHERAL PA_AREA6_IO /* SW6-6=ON */ + +#define PA_LAN (PA_PERIPHERAL + 0) /* SMC LAN91C111 */ +#define PA_LED_DISP (PA_PERIPHERAL + 0x02000000) /* 8words LED Display */ +#define DISP_CHAR_RAM (7 << 3) +#define DISP_SEL0_ADDR (DISP_CHAR_RAM + 0) +#define DISP_SEL1_ADDR (DISP_CHAR_RAM + 1) +#define DISP_SEL2_ADDR (DISP_CHAR_RAM + 2) +#define DISP_SEL3_ADDR (DISP_CHAR_RAM + 3) +#define DISP_SEL4_ADDR (DISP_CHAR_RAM + 4) +#define DISP_SEL5_ADDR (DISP_CHAR_RAM + 5) +#define DISP_SEL6_ADDR (DISP_CHAR_RAM + 6) +#define DISP_SEL7_ADDR (DISP_CHAR_RAM + 7) + +#define DISP_UDC_RAM (5 << 3) +#define PA_FPGA (PA_PERIPHERAL + 0x03000000) /* FPGA base address */ + +/* FPGA register address and bit */ +#define FPGA_SFTRST (PA_FPGA + 0) /* Soft reset register */ +#define FPGA_INTMSK1 (PA_FPGA + 2) /* Interrupt Mask register 1 */ +#define FPGA_INTMSK2 (PA_FPGA + 4) /* Interrupt Mask register 2 */ +#define FPGA_INTSEL1 (PA_FPGA + 6) /* Interrupt select register 1 */ +#define FPGA_INTSEL2 (PA_FPGA + 8) /* Interrupt select register 2 */ +#define FPGA_INTSEL3 (PA_FPGA + 10) /* Interrupt select register 3 */ +#define FPGA_PCI_INTSEL1 (PA_FPGA + 12) /* PCI Interrupt select register 1 */ +#define FPGA_PCI_INTSEL2 (PA_FPGA + 14) /* PCI Interrupt select register 2 */ +#define FPGA_INTSET (PA_FPGA + 16) /* IRQ/IRL select register */ +#define FPGA_INTSTS1 (PA_FPGA + 18) /* Interrupt status register 1 */ +#define FPGA_INTSTS2 (PA_FPGA + 20) /* Interrupt status register 2 */ +#define FPGA_REQSEL (PA_FPGA + 22) /* REQ/GNT select register */ +#define FPGA_DBG_LED (PA_FPGA + 32) /* Debug LED(D-LED[8:1] */ +#define PA_LED FPGA_DBG_LED +#define FPGA_IVDRID (PA_FPGA + 36) /* iVDR ID Register */ +#define FPGA_IVDRPW (PA_FPGA + 38) /* iVDR Power ON Register */ +#define FPGA_MMCID (PA_FPGA + 40) /* MMC ID Register */ + +/* FPGA INTSEL position */ +/* INTSEL1 */ +#define IRQPOS_SMC91CX (0 * 4) +#define IRQPOS_SM501 (1 * 4) +/* INTSEL2 */ +#define IRQPOS_EXTINT1 (0 * 4) +#define IRQPOS_EXTINT2 (1 * 4) +#define IRQPOS_EXTINT3 (2 * 4) +#define IRQPOS_EXTINT4 (3 * 4) +/* INTSEL3 */ +#define IRQPOS_PCCPW (0 * 4) + +/* IDE interrupt */ +#define IRQ_IDE0 67 /* iVDR */ + +/* SMC interrupt */ +#define SMC_IRQ 8 + +/* SM501 interrupt */ +#define SM501_IRQ 0 + +/* interrupt pin */ +#define IRQPIN_EXTINT1 0 /* IRQ0 pin */ +#define IRQPIN_EXTINT2 1 /* IRQ1 pin */ +#define IRQPIN_EXTINT3 2 /* IRQ2 pin */ +#define IRQPIN_SMC91CX 3 /* IRQ3 pin */ +#define IRQPIN_EXTINT4 4 /* IRQ4 pin */ +#define IRQPIN_PCC0 5 /* IRQ5 pin */ +#define IRQPIN_PCC2 6 /* IRQ6 pin */ +#define IRQPIN_SM501 7 /* IRQ7 pin */ +#define IRQPIN_PCCPW 7 /* IRQ7 pin */ + +/* arch/sh/boards/se/7780/irq.c */ +void init_se7780_IRQ(void); + +#define __IO_PREFIX se7780 +#include + +#endif /* __ASM_SH_SE7780_H */ diff --git a/arch/sh/kernel/cf-enabler.c b/arch/sh/kernel/cf-enabler.c index d3d9f320423..bea40339919 100644 --- a/arch/sh/kernel/cf-enabler.c +++ b/arch/sh/kernel/cf-enabler.c @@ -80,11 +80,11 @@ static int __init cf_init_default(void) } #if defined(CONFIG_SH_SOLUTION_ENGINE) -#include +#include #elif defined(CONFIG_SH_7722_SOLUTION_ENGINE) -#include +#include #elif defined(CONFIG_SH_7721_SOLUTION_ENGINE) -#include +#include #endif /* -- cgit v1.2.3-70-g09d2