From 3787aa112c653b34b6f901b2eaae2b62f9582569 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Mon, 19 May 2008 16:47:56 +0900 Subject: sh: RSK+ 7203 board support. This adds initial support for the RTE RSK+ SH7203 board. Signed-off-by: Paul Mundt --- arch/sh/boards/renesas/rsk7203/Makefile | 1 + arch/sh/boards/renesas/rsk7203/setup.c | 126 ++++++++++++++++++++++++++++++++ 2 files changed, 127 insertions(+) create mode 100644 arch/sh/boards/renesas/rsk7203/Makefile create mode 100644 arch/sh/boards/renesas/rsk7203/setup.c (limited to 'arch/sh/boards') diff --git a/arch/sh/boards/renesas/rsk7203/Makefile b/arch/sh/boards/renesas/rsk7203/Makefile new file mode 100644 index 00000000000..f663768429f --- /dev/null +++ b/arch/sh/boards/renesas/rsk7203/Makefile @@ -0,0 +1 @@ +obj-y := setup.o diff --git a/arch/sh/boards/renesas/rsk7203/setup.c b/arch/sh/boards/renesas/rsk7203/setup.c new file mode 100644 index 00000000000..0bbda04b03b --- /dev/null +++ b/arch/sh/boards/renesas/rsk7203/setup.c @@ -0,0 +1,126 @@ +/* + * Renesas Technology Europe RSK+ 7203 Support. + * + * Copyright (C) 2008 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include + +static struct resource smc911x_resources[] = { + [0] = { + .start = 0x24000000, + .end = 0x24000000 + 0x100, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 64, + .end = 64, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device smc911x_device = { + .name = "smc911x", + .id = -1, + .num_resources = ARRAY_SIZE(smc911x_resources), + .resource = smc911x_resources, +}; + +static const char *probes[] = { "cmdlinepart", NULL }; + +static struct mtd_partition *parsed_partitions; + +static struct mtd_partition rsk7203_partitions[] = { + { + .name = "Bootloader", + .offset = 0x00000000, + .size = 0x00040000, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "Kernel", + .offset = MTDPART_OFS_NXTBLK, + .size = 0x001c0000, + }, { + .name = "Flash_FS", + .offset = MTDPART_OFS_NXTBLK, + .size = MTDPART_SIZ_FULL, + } +}; + +static struct physmap_flash_data flash_data = { + .width = 2, +}; + +static struct resource flash_resource = { + .start = 0x20000000, + .end = 0x20400000, + .flags = IORESOURCE_MEM, +}; + +static struct platform_device flash_device = { + .name = "physmap-flash", + .id = -1, + .resource = &flash_resource, + .num_resources = 1, + .dev = { + .platform_data = &flash_data, + }, +}; + +static struct mtd_info *flash_mtd; + +static struct map_info rsk7203_flash_map = { + .name = "RSK+ Flash", + .size = 0x400000, + .bankwidth = 2, +}; + +static void __init set_mtd_partitions(void) +{ + int nr_parts = 0; + + simple_map_init(&rsk7203_flash_map); + flash_mtd = do_map_probe("cfi_probe", &rsk7203_flash_map); + nr_parts = parse_mtd_partitions(flash_mtd, probes, + &parsed_partitions, 0); + /* If there is no partition table, used the hard coded table */ + if (nr_parts <= 0) { + flash_data.parts = rsk7203_partitions; + flash_data.nr_parts = ARRAY_SIZE(rsk7203_partitions); + } else { + flash_data.nr_parts = nr_parts; + flash_data.parts = parsed_partitions; + } +} + + +static struct platform_device *rsk7203_devices[] __initdata = { + &smc911x_device, + &flash_device, +}; + +static int __init rsk7203_devices_setup(void) +{ + set_mtd_partitions(); + return platform_add_devices(rsk7203_devices, + ARRAY_SIZE(rsk7203_devices)); +} +device_initcall(rsk7203_devices_setup); + +/* + * The Machine Vector + */ +static struct sh_machine_vector mv_rsk7203 __initmv = { + .mv_name = "RSK+7203", +}; -- cgit v1.2.3-70-g09d2 From 04e917b606ffe6ec10fb75c21447162cba31f6b6 Mon Sep 17 00:00:00 2001 From: Yusuke Goda Date: Fri, 6 Jun 2008 17:03:23 +0900 Subject: sh: Add support Renesas Solutions AP-325RXA board This board is SH7723 base board. This has SCIF, LCDC, USB Host controler, NOR/NAND Flash, Sound, Ether and other. This patch supports SCIF, NOR Flash. Signed-off-by: Yusuke Goda Signed-off-by: Paul Mundt --- arch/sh/Kconfig | 7 + arch/sh/Makefile | 1 + arch/sh/boards/renesas/ap325rxa/Makefile | 1 + arch/sh/boards/renesas/ap325rxa/setup.c | 108 ++++ arch/sh/configs/ap325rxa_defconfig | 947 +++++++++++++++++++++++++++++++ arch/sh/tools/mach-types | 1 + 6 files changed, 1065 insertions(+) create mode 100644 arch/sh/boards/renesas/ap325rxa/Makefile create mode 100644 arch/sh/boards/renesas/ap325rxa/setup.c create mode 100644 arch/sh/configs/ap325rxa_defconfig (limited to 'arch/sh/boards') diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig index 83495882778..ca5efe64fad 100644 --- a/arch/sh/Kconfig +++ b/arch/sh/Kconfig @@ -502,6 +502,13 @@ config SH_MIGOR Select Migo-R if configuring for the SH7722 Migo-R platform by Renesas System Solutions Asia Pte. Ltd. +config SH_AP325RXA + bool "AP-325RXA" + select CPU_SUBTYPE_SH7723 + help + Renesas "AP-325RXA" support. + Compatible with ALGO SYSTEM CO.,LTD. "AP-320A" + config SH_EDOSK7705 bool "EDOSK7705" depends on CPU_SUBTYPE_SH7705 diff --git a/arch/sh/Makefile b/arch/sh/Makefile index c97a779c36e..73182d5e810 100644 --- a/arch/sh/Makefile +++ b/arch/sh/Makefile @@ -122,6 +122,7 @@ machdir-$(CONFIG_SH_MIGOR) += renesas/migor machdir-$(CONFIG_SH_SDK7780) += renesas/sdk7780 machdir-$(CONFIG_SH_X3PROTO) += renesas/x3proto machdir-$(CONFIG_SH_RSK7203) += renesas/rsk7203 +machdir-$(CONFIG_SH_AP325RXA) += renesas/ap325rxa machdir-$(CONFIG_SH_SH4202_MICRODEV) += superh/microdev machdir-$(CONFIG_SH_LANDISK) += landisk machdir-$(CONFIG_SH_TITAN) += titan diff --git a/arch/sh/boards/renesas/ap325rxa/Makefile b/arch/sh/boards/renesas/ap325rxa/Makefile new file mode 100644 index 00000000000..f663768429f --- /dev/null +++ b/arch/sh/boards/renesas/ap325rxa/Makefile @@ -0,0 +1 @@ +obj-y := setup.o diff --git a/arch/sh/boards/renesas/ap325rxa/setup.c b/arch/sh/boards/renesas/ap325rxa/setup.c new file mode 100644 index 00000000000..e33340cafa0 --- /dev/null +++ b/arch/sh/boards/renesas/ap325rxa/setup.c @@ -0,0 +1,108 @@ +/* + * Renesas - AP-325RXA + * (Compatible with Algo System ., LTD. - AP-320A) + * + * Copyright (C) 2008 Renesas Solutions Corp. + * Author : Yusuke Goda + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#include +#include +#include +#include +#include +#include + +static struct resource smc9118_resources[] = { + [0] = { + .start = 0xb6080000, + .end = 0xb60fffff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 35, + .end = 35, + .flags = IORESOURCE_IRQ, + } +}; + +static struct platform_device smc9118_device = { + .name = "smc911x", + .id = -1, + .num_resources = ARRAY_SIZE(smc9118_resources), + .resource = smc9118_resources, +}; + +static struct mtd_partition ap325rxa_nor_flash_partitions[] = { + { + .name = "uboot", + .offset = 0, + .size = (1 * 1024 * 1024), + .mask_flags = MTD_WRITEABLE, /* Read-only */ + }, { + .name = "kernel", + .offset = MTDPART_OFS_APPEND, + .size = (2 * 1024 * 1024), + }, { + .name = "other", + .offset = MTDPART_OFS_APPEND, + .size = MTDPART_SIZ_FULL, + }, +}; + +static struct physmap_flash_data ap325rxa_nor_flash_data = { + .width = 2, + .parts = ap325rxa_nor_flash_partitions, + .nr_parts = ARRAY_SIZE(ap325rxa_nor_flash_partitions), +}; + +static struct resource ap325rxa_nor_flash_resources[] = { + [0] = { + .name = "NOR Flash", + .start = 0x00000000, + .end = 0x00ffffff, + .flags = IORESOURCE_MEM, + } +}; + +static struct platform_device ap325rxa_nor_flash_device = { + .name = "physmap-flash", + .resource = ap325rxa_nor_flash_resources, + .num_resources = ARRAY_SIZE(ap325rxa_nor_flash_resources), + .dev = { + .platform_data = &ap325rxa_nor_flash_data, + }, +}; + +static struct platform_device *ap325rxa_devices[] __initdata = { + &smc9118_device, + &ap325rxa_nor_flash_device +}; + +static int __init ap325rxa_devices_setup(void) +{ + return platform_add_devices(ap325rxa_devices, + ARRAY_SIZE(ap325rxa_devices)); +} +device_initcall(ap325rxa_devices_setup); + +#define MSTPCR0 (0xA4150030) +#define MSTPCR2 (0xA4150038) + +static void __init ap325rxa_setup(char **cmdline_p) +{ + /* enable VEU0 + VEU1 */ + ctrl_outl(ctrl_inl(MSTPCR2) & ~0x00000044, MSTPCR2); /* bit 2 + 6 */ + + /* enable MERAM */ + ctrl_outl(ctrl_inl(MSTPCR0) & ~0x00000001, MSTPCR0); /* bit 0 */ +} + +static struct sh_machine_vector mv_ap325rxa __initmv = { + .mv_name = "AP-325RXA", + .mv_setup = ap325rxa_setup, +}; diff --git a/arch/sh/configs/ap325rxa_defconfig b/arch/sh/configs/ap325rxa_defconfig new file mode 100644 index 00000000000..5471df53753 --- /dev/null +++ b/arch/sh/configs/ap325rxa_defconfig @@ -0,0 +1,947 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.26-rc4 +# Wed Jun 4 17:30:00 2008 +# +CONFIG_SUPERH=y +CONFIG_SUPERH32=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_BUG=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_ARCH_NO_VIRT_TO_BUS=y +CONFIG_ARCH_SUPPORTS_AOUT=y +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +# CONFIG_LOCALVERSION_AUTO is not set +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set +CONFIG_BSD_PROCESS_ACCT=y +# CONFIG_BSD_PROCESS_ACCT_V3 is not set +# CONFIG_TASKSTATS is not set +# CONFIG_AUDIT is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +CONFIG_GROUP_SCHED=y +CONFIG_FAIR_GROUP_SCHED=y +# CONFIG_RT_GROUP_SCHED is not set +CONFIG_USER_SCHED=y +# CONFIG_CGROUP_SCHED is not set +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y +# CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set +# CONFIG_BLK_DEV_INITRD is not set +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_SYSCTL_SYSCALL_CHECK=y +# CONFIG_KALLSYMS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_COMPAT_BRK=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_HAVE_KPROBES is not set +# CONFIG_HAVE_KRETPROBES is not set +# CONFIG_HAVE_DMA_ATTRS is not set +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +CONFIG_DEFAULT_CFQ=y +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="cfq" +CONFIG_CLASSIC_RCU=y + +# +# System type +# +CONFIG_CPU_SH4=y +CONFIG_CPU_SH4A=y +CONFIG_CPU_SHX2=y +# CONFIG_CPU_SUBTYPE_SH7619 is not set +# CONFIG_CPU_SUBTYPE_SH7203 is not set +# CONFIG_CPU_SUBTYPE_SH7206 is not set +# CONFIG_CPU_SUBTYPE_SH7263 is not set +# CONFIG_CPU_SUBTYPE_MXG is not set +# CONFIG_CPU_SUBTYPE_SH7705 is not set +# CONFIG_CPU_SUBTYPE_SH7706 is not set +# CONFIG_CPU_SUBTYPE_SH7707 is not set +# CONFIG_CPU_SUBTYPE_SH7708 is not set +# CONFIG_CPU_SUBTYPE_SH7709 is not set +# CONFIG_CPU_SUBTYPE_SH7710 is not set +# CONFIG_CPU_SUBTYPE_SH7712 is not set +# CONFIG_CPU_SUBTYPE_SH7720 is not set +# CONFIG_CPU_SUBTYPE_SH7721 is not set +# CONFIG_CPU_SUBTYPE_SH7750 is not set +# CONFIG_CPU_SUBTYPE_SH7091 is not set +# CONFIG_CPU_SUBTYPE_SH7750R is not set +# CONFIG_CPU_SUBTYPE_SH7750S is not set +# CONFIG_CPU_SUBTYPE_SH7751 is not set +# CONFIG_CPU_SUBTYPE_SH7751R is not set +# CONFIG_CPU_SUBTYPE_SH7760 is not set +# CONFIG_CPU_SUBTYPE_SH4_202 is not set +CONFIG_CPU_SUBTYPE_SH7723=y +# CONFIG_CPU_SUBTYPE_SH7763 is not set +# CONFIG_CPU_SUBTYPE_SH7770 is not set +# CONFIG_CPU_SUBTYPE_SH7780 is not set +# CONFIG_CPU_SUBTYPE_SH7785 is not set +# CONFIG_CPU_SUBTYPE_SHX3 is not set +# CONFIG_CPU_SUBTYPE_SH7343 is not set +# CONFIG_CPU_SUBTYPE_SH7722 is not set +# CONFIG_CPU_SUBTYPE_SH7366 is not set +# CONFIG_CPU_SUBTYPE_SH5_101 is not set +# CONFIG_CPU_SUBTYPE_SH5_103 is not set + +# +# Memory management options +# +CONFIG_QUICKLIST=y +CONFIG_MMU=y +CONFIG_PAGE_OFFSET=0x80000000 +CONFIG_MEMORY_START=0x08000000 +CONFIG_MEMORY_SIZE=0x08000000 +CONFIG_29BIT=y +# CONFIG_X2TLB is not set +CONFIG_VSYSCALL=y +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_DEFAULT=y +CONFIG_MAX_ACTIVE_REGIONS=1 +CONFIG_ARCH_POPULATES_NODE_MAP=y +CONFIG_ARCH_SELECT_MEMORY_MODEL=y +CONFIG_PAGE_SIZE_4KB=y +# CONFIG_PAGE_SIZE_8KB is not set +# CONFIG_PAGE_SIZE_16KB is not set +# CONFIG_PAGE_SIZE_64KB is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_SPARSEMEM_STATIC=y +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_NR_QUICK=2 + +# +# Cache configuration +# +# CONFIG_SH_DIRECT_MAPPED is not set +CONFIG_CACHE_WRITEBACK=y +# CONFIG_CACHE_WRITETHROUGH is not set +# CONFIG_CACHE_OFF is not set + +# +# Processor features +# +CONFIG_CPU_LITTLE_ENDIAN=y +# CONFIG_CPU_BIG_ENDIAN is not set +CONFIG_SH_FPU=y +# CONFIG_SH_STORE_QUEUES is not set +CONFIG_CPU_HAS_INTEVT=y +CONFIG_CPU_HAS_SR_RB=y +CONFIG_CPU_HAS_PTEA=y +CONFIG_CPU_HAS_FPU=y + +# +# Board support +# +CONFIG_SH_AP325RXA=y + +# +# Timer and clock configuration +# +CONFIG_SH_TMU=y +CONFIG_SH_TIMER_IRQ=16 +CONFIG_SH_PCLK_FREQ=33333333 +CONFIG_TICK_ONESHOT=y +# CONFIG_NO_HZ is not set +CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y + +# +# CPU Frequency scaling +# +# CONFIG_CPU_FREQ is not set + +# +# DMA support +# +# CONFIG_SH_DMA is not set + +# +# Companion Chips +# + +# +# Additional SuperH Device Drivers +# +# CONFIG_HEARTBEAT is not set +# CONFIG_PUSH_SWITCH is not set + +# +# Kernel features +# +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_300 is not set +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +# CONFIG_SCHED_HRTICK is not set +# CONFIG_KEXEC is not set +# CONFIG_CRASH_DUMP is not set +# CONFIG_PREEMPT_NONE is not set +# CONFIG_PREEMPT_VOLUNTARY is not set +CONFIG_PREEMPT=y +# CONFIG_PREEMPT_RCU is not set +CONFIG_GUSA=y + +# +# Boot options +# +CONFIG_ZERO_PAGE_OFFSET=0x00001000 +CONFIG_BOOT_LINK_OFFSET=0x00800000 +CONFIG_CMDLINE_BOOL=y +CONFIG_CMDLINE="console=tty1 console=ttySC5,38400 root=/dev/nfs ip=dhcp" + +# +# Bus options +# +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCCARD is not set + +# +# Executable file formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_MISC is not set + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +CONFIG_IP_ADVANCED_ROUTER=y +CONFIG_ASK_IP_FIB_HASH=y +# CONFIG_IP_FIB_TRIE is not set +CONFIG_IP_FIB_HASH=y +# CONFIG_IP_MULTIPLE_TABLES is not set +# CONFIG_IP_ROUTE_MULTIPATH is not set +# CONFIG_IP_ROUTE_VERBOSE is not set +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +# CONFIG_IP_PNP_BOOTP is not set +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_LRO is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set +# CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +CONFIG_MTD_CONCAT=y +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y +# CONFIG_MTD_AR7_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_CFI_INTELEXT is not set +CONFIG_MTD_CFI_AMDSTD=y +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +CONFIG_MTD_PHYSMAP=y +CONFIG_MTD_PHYSMAP_START=0xffffffff +CONFIG_MTD_PHYSMAP_LEN=0 +CONFIG_MTD_PHYSMAP_BANKWIDTH=0 +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +# CONFIG_MTD_NAND is not set +# CONFIG_MTD_ONENAND is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +# CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_NBD is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=4 +CONFIG_BLK_DEV_RAM_SIZE=4096 +# CONFIG_BLK_DEV_XIP is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +CONFIG_MISC_DEVICES=y +# CONFIG_EEPROM_93CX6 is not set +# CONFIG_ENCLOSURE_SERVICES is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +# CONFIG_CHR_DEV_SG is not set +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set +CONFIG_SCSI_LOWLEVEL=y +# CONFIG_ISCSI_TCP is not set +# CONFIG_SCSI_DEBUG is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_VETH is not set +# CONFIG_PHYLIB is not set +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_AX88796 is not set +# CONFIG_STNIC is not set +# CONFIG_SMC91X is not set +CONFIG_SMC911X=y +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_B44 is not set +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +CONFIG_VT_HW_CONSOLE_BINDING=y +CONFIG_DEVKMEM=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_SH_SCI=y +CONFIG_SERIAL_SH_SCI_NR_UARTS=6 +CONFIG_SERIAL_SH_SCI_CONSOLE=y +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_IPMI_HANDLER is not set +CONFIG_HW_RANDOM=y +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +# CONFIG_I2C is not set +# CONFIG_SPI is not set +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_WATCHDOG is not set + +# +# Sonics Silicon Backplane +# +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set + +# +# Multimedia devices +# + +# +# Multimedia core support +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# +# CONFIG_DAB is not set + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +# CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Console display driver support +# +CONFIG_DUMMY_CONSOLE=y + +# +# Sound +# +# CONFIG_SOUND is not set +# CONFIG_HID_SUPPORT is not set +# CONFIG_USB_SUPPORT is not set +# CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set +# CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set +# CONFIG_RTC_CLASS is not set +# CONFIG_UIO is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +CONFIG_EXT2_FS_XATTR=y +CONFIG_EXT2_FS_POSIX_ACL=y +CONFIG_EXT2_FS_SECURITY=y +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +CONFIG_EXT3_FS_XATTR=y +CONFIG_EXT3_FS_POSIX_ACL=y +CONFIG_EXT3_FS_SECURITY=y +# CONFIG_EXT4DEV_FS is not set +CONFIG_JBD=y +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +CONFIG_FS_POSIX_ACL=y +# CONFIG_XFS_FS is not set +# CONFIG_OCFS2_FS is not set +CONFIG_DNOTIFY=y +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +# CONFIG_MSDOS_FS is not set +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLBFS is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_JFFS2_FS is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +# CONFIG_NFS_V4 is not set +CONFIG_NFSD=y +CONFIG_NFSD_V3=y +# CONFIG_NFSD_V3_ACL is not set +# CONFIG_NFSD_V4 is not set +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_EXPORTFS=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_SUNRPC_BIND34 is not set +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +CONFIG_NLS_CODEPAGE_932=y +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +CONFIG_NLS_ISO8859_1=y +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set +# CONFIG_DLM is not set + +# +# Kernel hacking +# +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +# CONFIG_ENABLE_MUST_CHECK is not set +CONFIG_FRAME_WARN=1024 +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +# CONFIG_DEBUG_KERNEL is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_SAMPLES is not set +# CONFIG_SH_STANDARD_BIOS is not set +# CONFIG_EARLY_SCIF_CONSOLE is not set +# CONFIG_SH_KGDB is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_MANAGER=y +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_MD4 is not set +# CONFIG_CRYPTO_MD5 is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_LZO is not set +CONFIG_CRYPTO_HW=y + +# +# Library routines +# +CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/sh/tools/mach-types b/arch/sh/tools/mach-types index 1ae9fefed0f..3a53f04d72d 100644 --- a/arch/sh/tools/mach-types +++ b/arch/sh/tools/mach-types @@ -47,3 +47,4 @@ CAYMAN SH_CAYMAN SDK7780 SH_SDK7780 MIGOR SH_MIGOR RSK7203 SH_RSK7203 +AP325RXA SH_AP325RXA -- cgit v1.2.3-70-g09d2 From 4cec1a37ba7d9dce6ed5d8259b95272100a98b1f Mon Sep 17 00:00:00 2001 From: Nobuhiro Iwamatsu Date: Fri, 6 Jun 2008 17:04:56 +0900 Subject: sh: Renesas Solutions SH7763RDP board support This patch adds basic support for the SH7763RDP board. This supports a basic stuff provided in SH7763, like SCIF, NOR Flash and USB host. Signed-off-by: Nobuhiro Iwamatsu Signed-off-by: Paul Mundt --- arch/sh/Kconfig | 7 + arch/sh/Makefile | 1 + arch/sh/boards/renesas/sh7763rdp/Makefile | 1 + arch/sh/boards/renesas/sh7763rdp/irq.c | 45 ++ arch/sh/boards/renesas/sh7763rdp/setup.c | 128 ++++ arch/sh/configs/sh7763rdp_defconfig | 1052 +++++++++++++++++++++++++++++ arch/sh/tools/mach-types | 1 + include/asm-sh/sh7763rdp.h | 54 ++ 8 files changed, 1289 insertions(+) create mode 100644 arch/sh/boards/renesas/sh7763rdp/Makefile create mode 100644 arch/sh/boards/renesas/sh7763rdp/irq.c create mode 100644 arch/sh/boards/renesas/sh7763rdp/setup.c create mode 100644 arch/sh/configs/sh7763rdp_defconfig create mode 100644 include/asm-sh/sh7763rdp.h (limited to 'arch/sh/boards') diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig index ca5efe64fad..9bbb70547f5 100644 --- a/arch/sh/Kconfig +++ b/arch/sh/Kconfig @@ -509,6 +509,13 @@ config SH_AP325RXA Renesas "AP-325RXA" support. Compatible with ALGO SYSTEM CO.,LTD. "AP-320A" +config SH_SH7763RDP + bool "SH7763RDP" + depends on CPU_SUBTYPE_SH7763 + help + Select SH7763RDP if configuring for a Renesas SH7763 + evaluation board. + config SH_EDOSK7705 bool "EDOSK7705" depends on CPU_SUBTYPE_SH7705 diff --git a/arch/sh/Makefile b/arch/sh/Makefile index 73182d5e810..1452c4df7de 100644 --- a/arch/sh/Makefile +++ b/arch/sh/Makefile @@ -123,6 +123,7 @@ machdir-$(CONFIG_SH_SDK7780) += renesas/sdk7780 machdir-$(CONFIG_SH_X3PROTO) += renesas/x3proto machdir-$(CONFIG_SH_RSK7203) += renesas/rsk7203 machdir-$(CONFIG_SH_AP325RXA) += renesas/ap325rxa +machdir-$(CONFIG_SH_SH7763RDP) += renesas/sh7763rdp machdir-$(CONFIG_SH_SH4202_MICRODEV) += superh/microdev machdir-$(CONFIG_SH_LANDISK) += landisk machdir-$(CONFIG_SH_TITAN) += titan diff --git a/arch/sh/boards/renesas/sh7763rdp/Makefile b/arch/sh/boards/renesas/sh7763rdp/Makefile new file mode 100644 index 00000000000..f6c0b55516d --- /dev/null +++ b/arch/sh/boards/renesas/sh7763rdp/Makefile @@ -0,0 +1 @@ +obj-y := setup.o irq.o diff --git a/arch/sh/boards/renesas/sh7763rdp/irq.c b/arch/sh/boards/renesas/sh7763rdp/irq.c new file mode 100644 index 00000000000..fd850bad2de --- /dev/null +++ b/arch/sh/boards/renesas/sh7763rdp/irq.c @@ -0,0 +1,45 @@ +/* + * linux/arch/sh/boards/renesas/sh7763rdp/irq.c + * + * Renesas Solutions SH7763RDP Support. + * + * Copyright (C) 2008 Renesas Solutions Corp. + * Copyright (C) 2008 Nobuhiro Iwamatsu + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#include +#include +#include +#include +#include + +#define INTC_BASE (0xFFD00000) +#define INTC_INT2PRI7 (INTC_BASE+0x4001C) +#define INTC_INT2MSKCR (INTC_BASE+0x4003C) +#define INTC_INT2MSKCR1 (INTC_BASE+0x400D4) + +/* + * Initialize IRQ setting + */ +void __init init_sh7763rdp_IRQ(void) +{ + /* GPIO enabled */ + ctrl_outl(1 << 25, INTC_INT2MSKCR); + + /* enable GPIO interrupts */ + ctrl_outl((ctrl_inl(INTC_INT2PRI7) & 0xFF00FFFF) | 0x000F0000, + INTC_INT2PRI7); + + /* USBH enabled */ + ctrl_outl(1 << 17, INTC_INT2MSKCR1); + + /* GETHER enabled */ + ctrl_outl(1 << 16, INTC_INT2MSKCR1); + + /* DMAC enabled */ + ctrl_outl(1 << 8, INTC_INT2MSKCR); +} diff --git a/arch/sh/boards/renesas/sh7763rdp/setup.c b/arch/sh/boards/renesas/sh7763rdp/setup.c new file mode 100644 index 00000000000..925f16af712 --- /dev/null +++ b/arch/sh/boards/renesas/sh7763rdp/setup.c @@ -0,0 +1,128 @@ +/* + * linux/arch/sh/boards/renesas/sh7763rdp/setup.c + * + * Renesas Solutions sh7763rdp board + * + * Copyright (C) 2008 Renesas Solutions Corp. + * Copyright (C) 2008 Nobuhiro Iwamatsu + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include +#include +#include +#include +#include +#include +#include + +/* NOR Flash */ +static struct mtd_partition sh7763rdp_nor_flash_partitions[] = { + { + .name = "U-Boot", + .offset = 0, + .size = (2 * 128 * 1024), + .mask_flags = MTD_WRITEABLE, /* Read-only */ + }, { + .name = "Linux-Kernel", + .offset = MTDPART_OFS_APPEND, + .size = (20 * 128 * 1024), + }, { + .name = "Root Filesystem", + .offset = MTDPART_OFS_APPEND, + .size = MTDPART_SIZ_FULL, + }, +}; + +static struct physmap_flash_data sh7763rdp_nor_flash_data = { + .width = 2, + .parts = sh7763rdp_nor_flash_partitions, + .nr_parts = ARRAY_SIZE(sh7763rdp_nor_flash_partitions), +}; + +static struct resource sh7763rdp_nor_flash_resources[] = { + [0] = { + .name = "NOR Flash", + .start = 0, + .end = (64 * 1024 * 1024), + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device sh7763rdp_nor_flash_device = { + .name = "physmap-flash", + .resource = sh7763rdp_nor_flash_resources, + .num_resources = ARRAY_SIZE(sh7763rdp_nor_flash_resources), + .dev = { + .platform_data = &sh7763rdp_nor_flash_data, + }, +}; + +static struct platform_device *sh7763rdp_devices[] __initdata = { + &sh7763rdp_nor_flash_device, +}; + +static int __init sh7763rdp_devices_setup(void) +{ + return platform_add_devices(sh7763rdp_devices, + ARRAY_SIZE(sh7763rdp_devices)); +} +__initcall(sh7763rdp_devices_setup); + +static void __init sh7763rdp_setup(char **cmdline_p) +{ + /* Board version check */ + if (ctrl_inw(CPLD_BOARD_ID_ERV_REG) == 0xECB1) + printk(KERN_INFO "RTE Standard Configuration\n"); + else + printk(KERN_INFO "RTA Standard Configuration\n"); + + /* USB pin select bits (clear bit 5-2 to 0) */ + ctrl_outw((ctrl_inw(PORT_PSEL2) & 0xFFC3), PORT_PSEL2); + /* USBH setup port I controls to other (clear bits 4-9 to 0) */ + ctrl_outw(ctrl_inw(PORT_PICR) & 0xFC0F, PORT_PICR); + + /* Select USB Host controller */ + ctrl_outw(0x00, USB_USBHSC); + + /* For LCD */ + /* set PTJ7-1, bits 15-2 of PJCR to 0 */ + ctrl_outw(ctrl_inw(PORT_PJCR) & 0x0003, PORT_PJCR); + /* set PTI5, bits 11-10 of PICR to 0 */ + ctrl_outw(ctrl_inw(PORT_PICR) & 0xF3FF, PORT_PICR); + ctrl_outw(0, PORT_PKCR); + ctrl_outw(0, PORT_PLCR); + /* set PSEL2 bits 14-8, 5-4, of PSEL2 to 0 */ + ctrl_outw((ctrl_inw(PORT_PSEL2) & 0x00C0), PORT_PSEL2); + /* set PSEL3 bits 14-12, 6-4, 2-0 of PSEL3 to 0 */ + ctrl_outw((ctrl_inw(PORT_PSEL3) & 0x0700), PORT_PSEL3); + + /* For HAC */ + /* bit3-0 0100:HAC & SSI1 enable */ + ctrl_outw((ctrl_inw(PORT_PSEL1) & 0xFFF0) | 0x0004, PORT_PSEL1); + /* bit14 1:SSI_HAC_CLK enable */ + ctrl_outw(ctrl_inw(PORT_PSEL4) | 0x4000, PORT_PSEL4); + + /* SH-Ether */ + ctrl_outw((ctrl_inw(PORT_PSEL1) & ~0xff00) | 0x2400, PORT_PSEL1); + ctrl_outw(0x0, PORT_PFCR); + ctrl_outw(0x0, PORT_PFCR); + ctrl_outw(0x0, PORT_PFCR); + + /* MMC */ + /*selects SCIF and MMC other functions */ + ctrl_outw(0x0001, PORT_PSEL0); + /* MMC clock operates */ + ctrl_outl(ctrl_inl(MSTPCR1) & ~0x8, MSTPCR1); + ctrl_outw(ctrl_inw(PORT_PACR) & ~0x3000, PORT_PACR); + ctrl_outw(ctrl_inw(PORT_PCCR) & ~0xCFC3, PORT_PCCR); +} + +static struct sh_machine_vector mv_sh7763rdp __initmv = { + .mv_name = "sh7763drp", + .mv_setup = sh7763rdp_setup, + .mv_nr_irqs = 112, + .mv_init_irq = init_sh7763rdp_IRQ, +}; diff --git a/arch/sh/configs/sh7763rdp_defconfig b/arch/sh/configs/sh7763rdp_defconfig new file mode 100644 index 00000000000..83f3fe5db3e --- /dev/null +++ b/arch/sh/configs/sh7763rdp_defconfig @@ -0,0 +1,1052 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.26-rc4 +# Fri Jun 6 12:20:17 2008 +# +CONFIG_SUPERH=y +CONFIG_SUPERH32=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_BUG=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_ARCH_NO_VIRT_TO_BUS=y +CONFIG_ARCH_SUPPORTS_AOUT=y +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_AUDIT is not set +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +CONFIG_GROUP_SCHED=y +CONFIG_FAIR_GROUP_SCHED=y +# CONFIG_RT_GROUP_SCHED is not set +CONFIG_USER_SCHED=y +# CONFIG_CGROUP_SCHED is not set +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y +# CONFIG_RELAY is not set +CONFIG_NAMESPACES=y +CONFIG_UTS_NS=y +CONFIG_IPC_NS=y +# CONFIG_USER_NS is not set +# CONFIG_PID_NS is not set +# CONFIG_BLK_DEV_INITRD is not set +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +CONFIG_UID16=y +# CONFIG_SYSCTL_SYSCALL is not set +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_COMPAT_BRK=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +CONFIG_PROFILING=y +# CONFIG_MARKERS is not set +CONFIG_OPROFILE=y +CONFIG_HAVE_OPROFILE=y +# CONFIG_HAVE_KPROBES is not set +# CONFIG_HAVE_KRETPROBES is not set +# CONFIG_HAVE_DMA_ATTRS is not set +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set +# CONFIG_MODULE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +# CONFIG_KMOD is not set +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_CLASSIC_RCU=y + +# +# System type +# +CONFIG_CPU_SH4=y +CONFIG_CPU_SH4A=y +# CONFIG_CPU_SUBTYPE_SH7619 is not set +# CONFIG_CPU_SUBTYPE_SH7203 is not set +# CONFIG_CPU_SUBTYPE_SH7206 is not set +# CONFIG_CPU_SUBTYPE_SH7263 is not set +# CONFIG_CPU_SUBTYPE_MXG is not set +# CONFIG_CPU_SUBTYPE_SH7705 is not set +# CONFIG_CPU_SUBTYPE_SH7706 is not set +# CONFIG_CPU_SUBTYPE_SH7707 is not set +# CONFIG_CPU_SUBTYPE_SH7708 is not set +# CONFIG_CPU_SUBTYPE_SH7709 is not set +# CONFIG_CPU_SUBTYPE_SH7710 is not set +# CONFIG_CPU_SUBTYPE_SH7712 is not set +# CONFIG_CPU_SUBTYPE_SH7720 is not set +# CONFIG_CPU_SUBTYPE_SH7721 is not set +# CONFIG_CPU_SUBTYPE_SH7750 is not set +# CONFIG_CPU_SUBTYPE_SH7091 is not set +# CONFIG_CPU_SUBTYPE_SH7750R is not set +# CONFIG_CPU_SUBTYPE_SH7750S is not set +# CONFIG_CPU_SUBTYPE_SH7751 is not set +# CONFIG_CPU_SUBTYPE_SH7751R is not set +# CONFIG_CPU_SUBTYPE_SH7760 is not set +# CONFIG_CPU_SUBTYPE_SH4_202 is not set +# CONFIG_CPU_SUBTYPE_SH7723 is not set +CONFIG_CPU_SUBTYPE_SH7763=y +# CONFIG_CPU_SUBTYPE_SH7770 is not set +# CONFIG_CPU_SUBTYPE_SH7780 is not set +# CONFIG_CPU_SUBTYPE_SH7785 is not set +# CONFIG_CPU_SUBTYPE_SHX3 is not set +# CONFIG_CPU_SUBTYPE_SH7343 is not set +# CONFIG_CPU_SUBTYPE_SH7722 is not set +# CONFIG_CPU_SUBTYPE_SH7366 is not set +# CONFIG_CPU_SUBTYPE_SH5_101 is not set +# CONFIG_CPU_SUBTYPE_SH5_103 is not set + +# +# Memory management options +# +CONFIG_QUICKLIST=y +CONFIG_MMU=y +CONFIG_PAGE_OFFSET=0x80000000 +CONFIG_MEMORY_START=0x0c000000 +CONFIG_MEMORY_SIZE=0x04000000 +CONFIG_29BIT=y +CONFIG_VSYSCALL=y +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_DEFAULT=y +CONFIG_MAX_ACTIVE_REGIONS=1 +CONFIG_ARCH_POPULATES_NODE_MAP=y +CONFIG_ARCH_SELECT_MEMORY_MODEL=y +CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y +CONFIG_PAGE_SIZE_4KB=y +# CONFIG_PAGE_SIZE_8KB is not set +# CONFIG_PAGE_SIZE_16KB is not set +# CONFIG_PAGE_SIZE_64KB is not set +CONFIG_SELECT_MEMORY_MODEL=y +# CONFIG_FLATMEM_MANUAL is not set +# CONFIG_DISCONTIGMEM_MANUAL is not set +CONFIG_SPARSEMEM_MANUAL=y +CONFIG_SPARSEMEM=y +CONFIG_HAVE_MEMORY_PRESENT=y +CONFIG_SPARSEMEM_STATIC=y +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +# CONFIG_MEMORY_HOTPLUG is not set +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_NR_QUICK=2 + +# +# Cache configuration +# +# CONFIG_SH_DIRECT_MAPPED is not set +CONFIG_CACHE_WRITEBACK=y +# CONFIG_CACHE_WRITETHROUGH is not set +# CONFIG_CACHE_OFF is not set + +# +# Processor features +# +CONFIG_CPU_LITTLE_ENDIAN=y +# CONFIG_CPU_BIG_ENDIAN is not set +CONFIG_SH_FPU=y +# CONFIG_SH_STORE_QUEUES is not set +CONFIG_CPU_HAS_INTEVT=y +CONFIG_CPU_HAS_SR_RB=y +CONFIG_CPU_HAS_FPU=y + +# +# Board support +# +CONFIG_SH_SH7763RDP=y + +# +# Timer and clock configuration +# +CONFIG_SH_TMU=y +CONFIG_SH_TIMER_IRQ=28 +CONFIG_SH_PCLK_FREQ=66666666 +# CONFIG_TICK_ONESHOT is not set +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y + +# +# CPU Frequency scaling +# +# CONFIG_CPU_FREQ is not set + +# +# DMA support +# +# CONFIG_SH_DMA is not set + +# +# Companion Chips +# + +# +# Additional SuperH Device Drivers +# +# CONFIG_HEARTBEAT is not set +# CONFIG_PUSH_SWITCH is not set + +# +# Kernel features +# +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_300 is not set +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +# CONFIG_SCHED_HRTICK is not set +# CONFIG_KEXEC is not set +# CONFIG_CRASH_DUMP is not set +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +CONFIG_GUSA=y + +# +# Boot options +# +CONFIG_ZERO_PAGE_OFFSET=0x00001000 +CONFIG_BOOT_LINK_OFFSET=0x00800000 +CONFIG_CMDLINE_BOOL=y +CONFIG_CMDLINE="console=ttySC2,115200 root=/dev/sda1 rootdelay=10" + +# +# Bus options +# +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCCARD is not set + +# +# Executable file formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_MISC is not set + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_LRO is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +CONFIG_WIRELESS_EXT=y +# CONFIG_MAC80211 is not set +# CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y +# CONFIG_MTD_AR7_PARTS is not set + +# +# User Modules And Translation Layers +# +# CONFIG_MTD_CHAR is not set +CONFIG_MTD_BLKDEVS=y +# CONFIG_MTD_BLOCK is not set +# CONFIG_MTD_BLOCK_RO is not set +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +CONFIG_MTD_JEDECPROBE=y +CONFIG_MTD_GEN_PROBE=y +CONFIG_MTD_CFI_ADV_OPTIONS=y +CONFIG_MTD_CFI_NOSWAP=y +# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set +# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set +CONFIG_MTD_CFI_GEOMETRY=y +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_OTP is not set +CONFIG_MTD_CFI_INTELEXT=y +CONFIG_MTD_CFI_AMDSTD=y +CONFIG_MTD_CFI_STAA=y +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +CONFIG_MTD_COMPLEX_MAPPINGS=y +CONFIG_MTD_PHYSMAP=y +CONFIG_MTD_PHYSMAP_START=0x8000000 +CONFIG_MTD_PHYSMAP_LEN=0 +CONFIG_MTD_PHYSMAP_BANKWIDTH=2 +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +# CONFIG_MTD_NAND is not set +# CONFIG_MTD_ONENAND is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +# CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_UB is not set +# CONFIG_BLK_DEV_RAM is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +# CONFIG_MISC_DEVICES is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +# CONFIG_CHR_DEV_SG is not set +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set +CONFIG_SCSI_LOWLEVEL=y +# CONFIG_ISCSI_TCP is not set +# CONFIG_SCSI_DEBUG is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_VETH is not set +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +# CONFIG_MARVELL_PHY is not set +# CONFIG_DAVICOM_PHY is not set +# CONFIG_QSEMI_PHY is not set +# CONFIG_LXT_PHY is not set +# CONFIG_CICADA_PHY is not set +# CONFIG_VITESSE_PHY is not set +# CONFIG_SMSC_PHY is not set +# CONFIG_BROADCOM_PHY is not set +# CONFIG_ICPLUS_PHY is not set +# CONFIG_REALTEK_PHY is not set +# CONFIG_FIXED_PHY is not set +CONFIG_MDIO_BITBANG=y +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_AX88796 is not set +# CONFIG_STNIC is not set +# CONFIG_SMC91X is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_B44 is not set +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET is not set +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +# CONFIG_VT is not set +CONFIG_DEVKMEM=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_SH_SCI=y +CONFIG_SERIAL_SH_SCI_NR_UARTS=3 +CONFIG_SERIAL_SH_SCI_CONSOLE=y +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_IPMI_HANDLER is not set +CONFIG_HW_RANDOM=y +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +# CONFIG_I2C is not set +# CONFIG_SPI is not set +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_WATCHDOG is not set + +# +# Sonics Silicon Backplane +# +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set + +# +# Multimedia devices +# + +# +# Multimedia core support +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# +# CONFIG_DAB is not set + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +# CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Sound +# +# CONFIG_SOUND is not set +# CONFIG_HID_SUPPORT is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +# CONFIG_USB_ARCH_HAS_EHCI is not set +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set +# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set + +# +# Miscellaneous USB options +# +# CONFIG_USB_DEVICEFS is not set +CONFIG_USB_DEVICE_CLASS=y +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_OTG is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_C67X00_HCD is not set +# CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set +CONFIG_USB_OHCI_HCD=y +# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +# CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set + +# +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set +# CONFIG_USB_WDM is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# may also be needed; see USB_STORAGE Help for more information +# +CONFIG_USB_STORAGE=y +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_ISD200 is not set +# CONFIG_USB_STORAGE_DPCM is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_ONETOUCH is not set +# CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set +CONFIG_USB_MON=y + +# +# USB port drivers +# +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_PHIDGET is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_GADGET is not set +# CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set +# CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set +# CONFIG_RTC_CLASS is not set +# CONFIG_UIO is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +CONFIG_EXT3_FS_XATTR=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +# CONFIG_EXT3_FS_SECURITY is not set +# CONFIG_EXT4DEV_FS is not set +CONFIG_JBD=y +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +CONFIG_FS_POSIX_ACL=y +# CONFIG_XFS_FS is not set +# CONFIG_OCFS2_FS is not set +CONFIG_DNOTIFY=y +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +CONFIG_AUTOFS_FS=y +CONFIG_AUTOFS4_FS=y +# CONFIG_FUSE_FS is not set +CONFIG_GENERIC_ACL=y + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +CONFIG_TMPFS_POSIX_ACL=y +# CONFIG_HUGETLBFS is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_JFFS2_FS is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +# CONFIG_NFS_V3 is not set +# CONFIG_NFS_V4 is not set +# CONFIG_NFSD is not set +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_SUNRPC_BIND34 is not set +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=y +CONFIG_NLS_CODEPAGE_737=y +CONFIG_NLS_CODEPAGE_775=y +CONFIG_NLS_CODEPAGE_850=y +CONFIG_NLS_CODEPAGE_852=y +CONFIG_NLS_CODEPAGE_855=y +CONFIG_NLS_CODEPAGE_857=y +CONFIG_NLS_CODEPAGE_860=y +CONFIG_NLS_CODEPAGE_861=y +CONFIG_NLS_CODEPAGE_862=y +CONFIG_NLS_CODEPAGE_863=y +CONFIG_NLS_CODEPAGE_864=y +CONFIG_NLS_CODEPAGE_865=y +CONFIG_NLS_CODEPAGE_866=y +CONFIG_NLS_CODEPAGE_869=y +CONFIG_NLS_CODEPAGE_936=y +CONFIG_NLS_CODEPAGE_950=y +CONFIG_NLS_CODEPAGE_932=y +CONFIG_NLS_CODEPAGE_949=y +CONFIG_NLS_CODEPAGE_874=y +CONFIG_NLS_ISO8859_8=y +CONFIG_NLS_CODEPAGE_1250=y +CONFIG_NLS_CODEPAGE_1251=y +CONFIG_NLS_ASCII=y +CONFIG_NLS_ISO8859_1=y +CONFIG_NLS_ISO8859_2=y +CONFIG_NLS_ISO8859_3=y +CONFIG_NLS_ISO8859_4=y +CONFIG_NLS_ISO8859_5=y +CONFIG_NLS_ISO8859_6=y +CONFIG_NLS_ISO8859_7=y +CONFIG_NLS_ISO8859_9=y +CONFIG_NLS_ISO8859_13=y +CONFIG_NLS_ISO8859_14=y +CONFIG_NLS_ISO8859_15=y +CONFIG_NLS_KOI8_R=y +CONFIG_NLS_KOI8_U=y +CONFIG_NLS_UTF8=y +# CONFIG_DLM is not set + +# +# Kernel hacking +# +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +# CONFIG_PRINTK_TIME is not set +# CONFIG_ENABLE_WARN_DEPRECATED is not set +# CONFIG_ENABLE_MUST_CHECK is not set +CONFIG_FRAME_WARN=1024 +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +# CONFIG_DEBUG_KERNEL is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_SAMPLES is not set +# CONFIG_SH_STANDARD_BIOS is not set +# CONFIG_EARLY_SCIF_CONSOLE is not set +# CONFIG_SH_KGDB is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +# CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +# CONFIG_CRYPTO_CBC is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_MD4 is not set +# CONFIG_CRYPTO_MD5 is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_LZO is not set +CONFIG_CRYPTO_HW=y + +# +# Library routines +# +CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/sh/tools/mach-types b/arch/sh/tools/mach-types index 3a53f04d72d..4473723685c 100644 --- a/arch/sh/tools/mach-types +++ b/arch/sh/tools/mach-types @@ -48,3 +48,4 @@ SDK7780 SH_SDK7780 MIGOR SH_MIGOR RSK7203 SH_RSK7203 AP325RXA SH_AP325RXA +SH7763RDP SH_SH7763RDP diff --git a/include/asm-sh/sh7763rdp.h b/include/asm-sh/sh7763rdp.h new file mode 100644 index 00000000000..8750cc85297 --- /dev/null +++ b/include/asm-sh/sh7763rdp.h @@ -0,0 +1,54 @@ +#ifndef __ASM_SH_SH7763RDP_H +#define __ASM_SH_SH7763RDP_H + +/* + * linux/include/asm-sh/sh7763drp.h + * + * Copyright (C) 2008 Renesas Solutions + * Copyright (C) 2008 Nobuhiro Iwamatsu + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + */ +#include + +/* clock control */ +#define MSTPCR1 0xFFC80038 + +/* PORT */ +#define PORT_PSEL0 0xFFEF0070 +#define PORT_PSEL1 0xFFEF0072 +#define PORT_PSEL2 0xFFEF0074 +#define PORT_PSEL3 0xFFEF0076 +#define PORT_PSEL4 0xFFEF0078 + +#define PORT_PACR 0xFFEF0000 +#define PORT_PCCR 0xFFEF0004 +#define PORT_PFCR 0xFFEF000A +#define PORT_PGCR 0xFFEF000C +#define PORT_PHCR 0xFFEF000E +#define PORT_PICR 0xFFEF0010 +#define PORT_PJCR 0xFFEF0012 +#define PORT_PKCR 0xFFEF0014 +#define PORT_PLCR 0xFFEF0016 +#define PORT_PMCR 0xFFEF0018 +#define PORT_PNCR 0xFFEF001A + +/* FPGA */ +#define CPLD_BOARD_ID_ERV_REG 0xB1000000 +#define CPLD_CPLD_CMD_REG 0xB1000006 + +/* + * USB SH7763RDP board can use Host only. + */ +#define USB_USBHSC 0xFFEC80f0 + +/* arch/sh/boards/renesas/sh7763rdp/irq.c */ +void init_sh7763rdp_IRQ(void); +int sh7763rdp_irq_demux(int irq); +#define __IO_PREFIX sh7763rdp +#include + +#endif /* __ASM_SH_SH7763RDP_H */ -- cgit v1.2.3-70-g09d2 From 2b7bf930ae762d3124317e36f26a7567dc04e835 Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Wed, 18 Jun 2008 01:30:57 +0300 Subject: sh/boards/dreamcast/rtc.c: make 2 functions static This patch makes the needlessly global aica_rtc_{get,set}timeofday() static. Signed-off-by: Adrian Bunk Signed-off-by: Paul Mundt --- arch/sh/boards/dreamcast/rtc.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch/sh/boards') diff --git a/arch/sh/boards/dreamcast/rtc.c b/arch/sh/boards/dreamcast/rtc.c index b3a876a3b85..a7433685798 100644 --- a/arch/sh/boards/dreamcast/rtc.c +++ b/arch/sh/boards/dreamcast/rtc.c @@ -30,7 +30,7 @@ * * Grabs the current RTC seconds counter and adjusts it to the Unix Epoch. */ -void aica_rtc_gettimeofday(struct timespec *ts) +static void aica_rtc_gettimeofday(struct timespec *ts) { unsigned long val1, val2; @@ -54,7 +54,7 @@ void aica_rtc_gettimeofday(struct timespec *ts) * * Adjusts the given @tv to the AICA Epoch and sets the RTC seconds counter. */ -int aica_rtc_settimeofday(const time_t secs) +static int aica_rtc_settimeofday(const time_t secs) { unsigned long val1, val2; unsigned long adj = secs + TWENTY_YEARS; -- cgit v1.2.3-70-g09d2 From ffb91ad2751723bcc9925cd38e37013e2169e256 Mon Sep 17 00:00:00 2001 From: Nobuhiro Iwamatsu Date: Wed, 18 Jun 2008 18:29:06 +0900 Subject: sh: Solution Enginge 7710/7712 SH-Ether support Add support SH-Ether for Hitachi Solution Engine. Signed-off-by: Nobuhiro Iwamatsu Signed-off-by: Paul Mundt --- arch/sh/boards/se/770x/setup.c | 49 ++++++++++++++++++++++++++++++++++++++++++ include/asm-sh/se.h | 15 +++++++++++++ 2 files changed, 64 insertions(+) (limited to 'arch/sh/boards') diff --git a/arch/sh/boards/se/770x/setup.c b/arch/sh/boards/se/770x/setup.c index 318bc8a3969..25767cc3a50 100644 --- a/arch/sh/boards/se/770x/setup.c +++ b/arch/sh/boards/se/770x/setup.c @@ -115,9 +115,58 @@ static struct platform_device heartbeat_device = { .resource = heartbeat_resources, }; +/* SH771X Ethernet driver */ +static struct resource sh_eth0_resources[] = { + [0] = { + .start = SH_ETH0_BASE, + .end = SH_ETH0_BASE + 0x1B8, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = SH_ETH0_IRQ, + .end = SH_ETH0_IRQ, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device sh_eth0_device = { + .name = "sh-eth", + .id = 0, + .dev = { + .platform_data = PHY_ID, + }, + .num_resources = ARRAY_SIZE(sh_eth0_resources), + .resource = sh_eth0_resources, +}; + +static struct resource sh_eth1_resources[] = { + [0] = { + .start = SH_ETH1_BASE, + .end = SH_ETH1_BASE + 0x1B8, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = SH_ETH1_IRQ, + .end = SH_ETH1_IRQ, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device sh_eth1_device = { + .name = "sh-eth", + .id = 1, + .dev = { + .platform_data = PHY_ID, + }, + .num_resources = ARRAY_SIZE(sh_eth1_resources), + .resource = sh_eth1_resources, +}; + static struct platform_device *se_devices[] __initdata = { &heartbeat_device, &cf_ide_device, + &sh_eth0_device, + &sh_eth1_device, }; static int __init se_devices_setup(void) diff --git a/include/asm-sh/se.h b/include/asm-sh/se.h index bd2596c014a..0e2f720b966 100644 --- a/include/asm-sh/se.h +++ b/include/asm-sh/se.h @@ -76,6 +76,21 @@ #define IRQ_CFCARD 7 #endif +/* SH Ether support (SH7710/SH7712) */ +/* Base address */ +#define SH_ETH0_BASE 0xA7000000 +#define SH_ETH1_BASE 0xA7000400 +/* PHY ID */ +#if defined(CONFIG_CPU_SUBTYPE_SH7710) +# define PHY_ID 0x00 +#elif defined(CONFIG_CPU_SUBTYPE_SH7712) +# define PHY_ID 0x01 +#endif +/* Ether IRQ */ +#define SH_ETH0_IRQ 80 +#define SH_ETH1_IRQ 81 +#define SH_TSU_IRQ 82 + #define __IO_PREFIX se #include -- cgit v1.2.3-70-g09d2 From 787d9d7e89c3952db12d9e4bb02ba5c5a85f6b7f Mon Sep 17 00:00:00 2001 From: Nobuhiro Iwamatsu Date: Wed, 18 Jun 2008 18:32:03 +0900 Subject: sh: Clean up code of Solution Engine 770x Signed-off-by: Nobuhiro Iwamatsu Signed-off-by: Paul Mundt --- arch/sh/boards/se/770x/setup.c | 4 +--- include/asm-sh/se.h | 2 ++ 2 files changed, 3 insertions(+), 3 deletions(-) (limited to 'arch/sh/boards') diff --git a/arch/sh/boards/se/770x/setup.c b/arch/sh/boards/se/770x/setup.c index 25767cc3a50..cf4a5ba12df 100644 --- a/arch/sh/boards/se/770x/setup.c +++ b/arch/sh/boards/se/770x/setup.c @@ -14,8 +14,6 @@ #include #include -void init_se_IRQ(void); - /* * Configure the Super I/O chip */ @@ -73,7 +71,7 @@ static struct resource cf_ide_resources[] = { }, [1] = { .start = PA_MRSHPC_IO + 0x1f0 + 0x206, - .end = PA_MRSHPC_IO + 0x1f0 +8 + 0x206 + 8, + .end = PA_MRSHPC_IO + 0x1f0 + 8 + 0x206 + 8, .flags = IORESOURCE_MEM, }, [2] = { diff --git a/include/asm-sh/se.h b/include/asm-sh/se.h index 0e2f720b966..eb23000e1bb 100644 --- a/include/asm-sh/se.h +++ b/include/asm-sh/se.h @@ -91,6 +91,8 @@ #define SH_ETH1_IRQ 81 #define SH_TSU_IRQ 82 +void init_se_IRQ(void); + #define __IO_PREFIX se #include -- cgit v1.2.3-70-g09d2 From fafb7a97de73a917a875048801bd81cf64f79e4a Mon Sep 17 00:00:00 2001 From: Nobuhiro Iwamatsu Date: Tue, 24 Jun 2008 13:00:52 +0900 Subject: sh: Remove sh_pcic_io_xxx function from Solution Engine IO code sh_pcic_io_xxx function are very old. In linux-2.4, mrshpc_ss socket driver used this function. But there is not this driver to the present kernel. I deleted these cords and checked operation. Signed-off-by: Nobuhiro Iwamatsu Signed-off-by: Paul Mundt --- arch/sh/boards/se/770x/io.c | 59 +++++++++++---------------------------------- 1 file changed, 14 insertions(+), 45 deletions(-) (limited to 'arch/sh/boards') diff --git a/arch/sh/boards/se/770x/io.c b/arch/sh/boards/se/770x/io.c index c4550473d4c..b1ec085b867 100644 --- a/arch/sh/boards/se/770x/io.c +++ b/arch/sh/boards/se/770x/io.c @@ -1,25 +1,13 @@ -/* $Id: io.c,v 1.7 2006/02/05 21:55:29 lethal Exp $ - * - * linux/arch/sh/kernel/io_se.c - * +/* * Copyright (C) 2000 Kazumoto Kojima * * I/O routine for Hitachi SolutionEngine. - * */ - #include #include #include #include -/* SH pcmcia io window base, start and end. */ -int sh_pcic_io_wbase = 0xb8400000; -int sh_pcic_io_start; -int sh_pcic_io_stop; -int sh_pcic_io_type; -int sh_pcic_io_dummy; - /* MS7750 requires special versions of in*, out* routines, since PC-like io ports are located at upper half byte of 16-bit word which can be accessed only with 16-bit wide. */ @@ -33,8 +21,6 @@ port2adr(unsigned int port) return (volatile __u16 *) (PA_MRSHPC + (port - 0x2000)); else if (port >= 0x1000) return (volatile __u16 *) (PA_83902 + (port << 1)); - else if (sh_pcic_io_start <= port && port <= sh_pcic_io_stop) - return (volatile __u16 *) (sh_pcic_io_wbase + (port &~ 1)); else return (volatile __u16 *) (PA_SUPERIO + (port << 1)); } @@ -51,32 +37,27 @@ shifted_port(unsigned long port) unsigned char se_inb(unsigned long port) { - if (sh_pcic_io_start <= port && port <= sh_pcic_io_stop) - return *(__u8 *) (sh_pcic_io_wbase + 0x40000 + port); - else if (shifted_port(port)) - return (*port2adr(port) >> 8); + if (shifted_port(port)) + return (*port2adr(port) >> 8); else - return (*port2adr(port))&0xff; + return (*port2adr(port))&0xff; } unsigned char se_inb_p(unsigned long port) { unsigned long v; - if (sh_pcic_io_start <= port && port <= sh_pcic_io_stop) - v = *(__u8 *) (sh_pcic_io_wbase + 0x40000 + port); - else if (shifted_port(port)) - v = (*port2adr(port) >> 8); + if (shifted_port(port)) + v = (*port2adr(port) >> 8); else - v = (*port2adr(port))&0xff; + v = (*port2adr(port))&0xff; ctrl_delay(); return v; } unsigned short se_inw(unsigned long port) { - if (port >= 0x2000 || - (sh_pcic_io_start <= port && port <= sh_pcic_io_stop)) + if (port >= 0x2000) return *port2adr(port); else maybebadio(port); @@ -91,9 +72,7 @@ unsigned int se_inl(unsigned long port) void se_outb(unsigned char value, unsigned long port) { - if (sh_pcic_io_start <= port && port <= sh_pcic_io_stop) - *(__u8 *)(sh_pcic_io_wbase + port) = value; - else if (shifted_port(port)) + if (shifted_port(port)) *(port2adr(port)) = value << 8; else *(port2adr(port)) = value; @@ -101,9 +80,7 @@ void se_outb(unsigned char value, unsigned long port) void se_outb_p(unsigned char value, unsigned long port) { - if (sh_pcic_io_start <= port && port <= sh_pcic_io_stop) - *(__u8 *)(sh_pcic_io_wbase + port) = value; - else if (shifted_port(port)) + if (shifted_port(port)) *(port2adr(port)) = value << 8; else *(port2adr(port)) = value; @@ -112,8 +89,7 @@ void se_outb_p(unsigned char value, unsigned long port) void se_outw(unsigned short value, unsigned long port) { - if (port >= 0x2000 || - (sh_pcic_io_start <= port && port <= sh_pcic_io_stop)) + if (port >= 0x2000) *port2adr(port) = value; else maybebadio(port); @@ -129,11 +105,7 @@ void se_insb(unsigned long port, void *addr, unsigned long count) volatile __u16 *p = port2adr(port); __u8 *ap = addr; - if (sh_pcic_io_start <= port && port <= sh_pcic_io_stop) { - volatile __u8 *bp = (__u8 *) (sh_pcic_io_wbase + 0x40000 + port); - while (count--) - *ap++ = *bp; - } else if (shifted_port(port)) { + if (shifted_port(port)) { while (count--) *ap++ = *p >> 8; } else { @@ -160,11 +132,7 @@ void se_outsb(unsigned long port, const void *addr, unsigned long count) volatile __u16 *p = port2adr(port); const __u8 *ap = addr; - if (sh_pcic_io_start <= port && port <= sh_pcic_io_stop) { - volatile __u8 *bp = (__u8 *) (sh_pcic_io_wbase + port); - while (count--) - *bp = *ap++; - } else if (shifted_port(port)) { + if (shifted_port(port)) { while (count--) *p = *ap++ << 8; } else { @@ -177,6 +145,7 @@ void se_outsw(unsigned long port, const void *addr, unsigned long count) { volatile __u16 *p = port2adr(port); const __u16 *ap = addr; + while (count--) *p = *ap++; } -- cgit v1.2.3-70-g09d2 From 026953db56e6244c8c80be8e211e244ff6015992 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Sat, 5 Jul 2008 12:32:44 +0900 Subject: sh: enable I2C on the ap325rxa board This patch enables I2C on the sh7723-based ap325rxa board. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt --- arch/sh/boards/renesas/ap325rxa/setup.c | 11 +++++++++++ 1 file changed, 11 insertions(+) (limited to 'arch/sh/boards') diff --git a/arch/sh/boards/renesas/ap325rxa/setup.c b/arch/sh/boards/renesas/ap325rxa/setup.c index e33340cafa0..f8d6d41893a 100644 --- a/arch/sh/boards/renesas/ap325rxa/setup.c +++ b/arch/sh/boards/renesas/ap325rxa/setup.c @@ -15,6 +15,7 @@ #include #include #include +#include #include static struct resource smc9118_resources[] = { @@ -83,14 +84,21 @@ static struct platform_device *ap325rxa_devices[] __initdata = { &ap325rxa_nor_flash_device }; +static struct i2c_board_info __initdata ap325rxa_i2c_devices[] = { +}; + static int __init ap325rxa_devices_setup(void) { + i2c_register_board_info(0, ap325rxa_i2c_devices, + ARRAY_SIZE(ap325rxa_i2c_devices)); + return platform_add_devices(ap325rxa_devices, ARRAY_SIZE(ap325rxa_devices)); } device_initcall(ap325rxa_devices_setup); #define MSTPCR0 (0xA4150030) +#define MSTPCR1 (0xA4150034) #define MSTPCR2 (0xA4150038) static void __init ap325rxa_setup(char **cmdline_p) @@ -100,6 +108,9 @@ static void __init ap325rxa_setup(char **cmdline_p) /* enable MERAM */ ctrl_outl(ctrl_inl(MSTPCR0) & ~0x00000001, MSTPCR0); /* bit 0 */ + + /* I2C */ + ctrl_outl(ctrl_inl(MSTPCR1) & ~0x00000200, MSTPCR1); } static struct sh_machine_vector mv_ap325rxa __initmv = { -- cgit v1.2.3-70-g09d2 From cafd63b0076b78bc8f114abbeb724c7e5f5bfe5d Mon Sep 17 00:00:00 2001 From: Yoshihiro Shimoda Date: Mon, 7 Jul 2008 21:11:54 +0900 Subject: sh: update Solution Engine 7343 updated the following codes for Solution Endine 7343: - fix compile error in arch/sh/boards/se/7343/irq.c - add nor flash physmaps - update defconfig Signed-off-by: Yoshihiro Shimoda Signed-off-by: Paul Mundt --- arch/sh/boards/se/7343/irq.c | 232 +++--------- arch/sh/boards/se/7343/setup.c | 74 +++- arch/sh/configs/se7343_defconfig | 735 +++++++++++++++++++-------------------- include/asm-sh/se7343.h | 97 +++++- 4 files changed, 561 insertions(+), 577 deletions(-) (limited to 'arch/sh/boards') diff --git a/arch/sh/boards/se/7343/irq.c b/arch/sh/boards/se/7343/irq.c index 763f6deba81..1112e86aa93 100644 --- a/arch/sh/boards/se/7343/irq.c +++ b/arch/sh/boards/se/7343/irq.c @@ -1,202 +1,80 @@ /* - * arch/sh/boards/se/7343/irq.c + * linux/arch/sh/boards/se/7343/irq.c * + * Copyright (C) 2008 Yoshihiro Shimoda + * + * Based on linux/arch/sh/boards/se/7722/irq.c + * Copyright (C) 2007 Nobuhiro Iwamatsu + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. */ #include -#include #include +#include #include #include -#include +#include -static void -disable_intreq_irq(unsigned int irq) +static void disable_se7343_irq(unsigned int irq) { - int bit = irq - OFFCHIP_IRQ_BASE; - u16 val; - - val = ctrl_inw(PA_CPLD_IMSK); - val |= 1 << bit; - ctrl_outw(val, PA_CPLD_IMSK); + unsigned int bit = irq - SE7343_FPGA_IRQ_BASE; + ctrl_outw(ctrl_inw(PA_CPLD_IMSK) | 1 << bit, PA_CPLD_IMSK); } -static void -enable_intreq_irq(unsigned int irq) +static void enable_se7343_irq(unsigned int irq) { - int bit = irq - OFFCHIP_IRQ_BASE; - u16 val; - - val = ctrl_inw(PA_CPLD_IMSK); - val &= ~(1 << bit); - ctrl_outw(val, PA_CPLD_IMSK); + unsigned int bit = irq - SE7343_FPGA_IRQ_BASE; + ctrl_outw(ctrl_inw(PA_CPLD_IMSK) & ~(1 << bit), PA_CPLD_IMSK); } -static void -mask_and_ack_intreq_irq(unsigned int irq) -{ - disable_intreq_irq(irq); -} - -static unsigned int -startup_intreq_irq(unsigned int irq) -{ - enable_intreq_irq(irq); - return 0; -} - -static void -shutdown_intreq_irq(unsigned int irq) -{ - disable_intreq_irq(irq); -} - -static void -end_intreq_irq(unsigned int irq) -{ - if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS))) - enable_intreq_irq(irq); -} - -static struct hw_interrupt_type intreq_irq_type = { - .typename = "FPGA-IRQ", - .startup = startup_intreq_irq, - .shutdown = shutdown_intreq_irq, - .enable = enable_intreq_irq, - .disable = disable_intreq_irq, - .ack = mask_and_ack_intreq_irq, - .end = end_intreq_irq +static struct irq_chip se7343_irq_chip __read_mostly = { + .name = "SE7343-FPGA", + .mask = disable_se7343_irq, + .unmask = enable_se7343_irq, + .mask_ack = disable_se7343_irq, }; -static void -make_intreq_irq(unsigned int irq) -{ - disable_irq_nosync(irq); - irq_desc[irq].chip = &intreq_irq_type; - disable_intreq_irq(irq); -} - -int -shmse_irq_demux(int irq) +static void se7343_irq_demux(unsigned int irq, struct irq_desc *desc) { - int bit; - volatile u16 val; - - if (irq == IRQ5_IRQ) { - /* Read status Register */ - val = ctrl_inw(PA_CPLD_ST); - bit = ffs(val); - if (bit != 0) - return OFFCHIP_IRQ_BASE + bit - 1; + unsigned short intv = ctrl_inw(PA_CPLD_ST); + struct irq_desc *ext_desc; + unsigned int ext_irq = SE7343_FPGA_IRQ_BASE; + + intv &= (1 << SE7343_FPGA_IRQ_NR) - 1; + + while (intv) { + if (intv & 1) { + ext_desc = irq_desc + ext_irq; + handle_level_irq(ext_irq, ext_desc); + } + intv >>= 1; + ext_irq++; } - return irq; } -/* IRQ5 is multiplexed between the following sources: - * 1. PC Card socket - * 2. Extension slot - * 3. USB Controller - * 4. Serial Controller - * - * We configure IRQ5 as a cascade IRQ. - */ -static struct irqaction irq5 = { - .handler = no_action, - .mask = CPU_MASK_NONE, - .name = "IRQ5-cascade", -}; - -static struct ipr_data se7343_irq5_ipr_map[] = { - { IRQ5_IRQ, IRQ5_IPR_ADDR+2, IRQ5_IPR_POS, IRQ5_PRIORITY }, -}; -static struct ipr_data se7343_siof0_vpu_ipr_map[] = { - { SIOF0_IRQ, SIOF0_IPR_ADDR, SIOF0_IPR_POS, SIOF0_PRIORITY }, - { VPU_IRQ, VPU_IPR_ADDR, VPU_IPR_POS, 8 }, -}; -static struct ipr_data se7343_other_ipr_map[] = { - { DMTE0_IRQ, DMA1_IPR_ADDR, DMA1_IPR_POS, DMA1_PRIORITY }, - { DMTE1_IRQ, DMA1_IPR_ADDR, DMA1_IPR_POS, DMA1_PRIORITY }, - { DMTE2_IRQ, DMA1_IPR_ADDR, DMA1_IPR_POS, DMA1_PRIORITY }, - { DMTE3_IRQ, DMA1_IPR_ADDR, DMA1_IPR_POS, DMA1_PRIORITY }, - { DMTE4_IRQ, DMA2_IPR_ADDR, DMA2_IPR_POS, DMA2_PRIORITY }, - { DMTE5_IRQ, DMA2_IPR_ADDR, DMA2_IPR_POS, DMA2_PRIORITY }, - - /* I2C block */ - { IIC0_ALI_IRQ, IIC0_IPR_ADDR, IIC0_IPR_POS, IIC0_PRIORITY }, - { IIC0_TACKI_IRQ, IIC0_IPR_ADDR, IIC0_IPR_POS, IIC0_PRIORITY }, - { IIC0_WAITI_IRQ, IIC0_IPR_ADDR, IIC0_IPR_POS, IIC0_PRIORITY }, - { IIC0_DTEI_IRQ, IIC0_IPR_ADDR, IIC0_IPR_POS, IIC0_PRIORITY }, - - { IIC1_ALI_IRQ, IIC1_IPR_ADDR, IIC1_IPR_POS, IIC1_PRIORITY }, - { IIC1_TACKI_IRQ, IIC1_IPR_ADDR, IIC1_IPR_POS, IIC1_PRIORITY }, - { IIC1_WAITI_IRQ, IIC1_IPR_ADDR, IIC1_IPR_POS, IIC1_PRIORITY }, - { IIC1_DTEI_IRQ, IIC1_IPR_ADDR, IIC1_IPR_POS, IIC1_PRIORITY }, - - /* SIOF */ - { SIOF0_IRQ, SIOF0_IPR_ADDR, SIOF0_IPR_POS, SIOF0_PRIORITY }, - - /* SIU */ - { SIU_IRQ, SIU_IPR_ADDR, SIU_IPR_POS, SIU_PRIORITY }, - - /* VIO interrupt */ - { CEU_IRQ, VIO_IPR_ADDR, VIO_IPR_POS, VIO_PRIORITY }, - { BEU_IRQ, VIO_IPR_ADDR, VIO_IPR_POS, VIO_PRIORITY }, - { VEU_IRQ, VIO_IPR_ADDR, VIO_IPR_POS, VIO_PRIORITY }, - - /*MFI interrupt*/ - - { MFI_IRQ, MFI_IPR_ADDR, MFI_IPR_POS, MFI_PRIORITY }, - - /* LCD controller */ - { LCDC_IRQ, LCDC_IPR_ADDR, LCDC_IPR_POS, LCDC_PRIORITY }, -}; - /* * Initialize IRQ setting */ -void __init -init_7343se_IRQ(void) +void __init init_7343se_IRQ(void) { - /* Setup Multiplexed interrupts */ - ctrl_outw(8, PA_CPLD_MODESET); /* Set all CPLD interrupts to active - * low. - */ - /* Mask all CPLD controller interrupts */ - ctrl_outw(0x0fff, PA_CPLD_IMSK); - - /* PC Card interrupts */ - make_intreq_irq(PC_IRQ0); - make_intreq_irq(PC_IRQ1); - make_intreq_irq(PC_IRQ2); - make_intreq_irq(PC_IRQ3); - - /* Extension Slot Interrupts */ - make_intreq_irq(EXT_IRQ0); - make_intreq_irq(EXT_IRQ1); - make_intreq_irq(EXT_IRQ2); - make_intreq_irq(EXT_IRQ3); - - /* USB Controller interrupts */ - make_intreq_irq(USB_IRQ0); - make_intreq_irq(USB_IRQ1); - - /* Serial Controller interrupts */ - make_intreq_irq(UART_IRQ0); - make_intreq_irq(UART_IRQ1); - - /* Setup all external interrupts to be active low */ - ctrl_outw(0xaaaa, INTC_ICR1); - - make_ipr_irq(se7343_irq5_ipr_map, ARRAY_SIZE(se7343_irq5_ipr_map)); - - setup_irq(IRQ5_IRQ, &irq5); - /* Set port control to use IRQ5 */ - *(u16 *)0xA4050108 &= ~0xc; - - make_ipr_irq(se7343_siof0_vpu_ipr_map, ARRAY_SIZE(se7343_siof0_vpu_ipr_map)); - - ctrl_outb(0x0f, INTC_IMCR5); /* enable SCIF IRQ */ - - make_ipr_irq(se7343_other_ipr_map, ARRAY_SIZE(se7343_other_ipr_map)); - - ctrl_outw(0x2000, PA_MRSHPC + 0x0c); /* mrshpc irq enable */ + int i; + + ctrl_outw(0, PA_CPLD_IMSK); /* disable all irqs */ + ctrl_outw(0x2000, 0xb03fffec); /* mrshpc irq enable */ + + for (i = 0; i < SE7343_FPGA_IRQ_NR; i++) + set_irq_chip_and_handler_name(SE7343_FPGA_IRQ_BASE + i, + &se7343_irq_chip, + handle_level_irq, "level"); + + set_irq_chained_handler(IRQ0_IRQ, se7343_irq_demux); + set_irq_type(IRQ0_IRQ, IRQ_TYPE_LEVEL_LOW); + set_irq_chained_handler(IRQ1_IRQ, se7343_irq_demux); + set_irq_type(IRQ1_IRQ, IRQ_TYPE_LEVEL_LOW); + set_irq_chained_handler(IRQ4_IRQ, se7343_irq_demux); + set_irq_type(IRQ4_IRQ, IRQ_TYPE_LEVEL_LOW); + set_irq_chained_handler(IRQ5_IRQ, se7343_irq_demux); + set_irq_type(IRQ5_IRQ, IRQ_TYPE_LEVEL_LOW); } diff --git a/arch/sh/boards/se/7343/setup.c b/arch/sh/boards/se/7343/setup.c index c9431b3a051..59d8d94a8c2 100644 --- a/arch/sh/boards/se/7343/setup.c +++ b/arch/sh/boards/se/7343/setup.c @@ -1,10 +1,11 @@ #include #include +#include #include #include +#include #include - -void init_7343se_IRQ(void); +#include static struct resource smc91x_resources[] = { [0] = { @@ -17,8 +18,8 @@ static struct resource smc91x_resources[] = { * shared with other devices via externel * interrupt controller in FPGA... */ - .start = EXT_IRQ2, - .end = EXT_IRQ2, + .start = SMC_IRQ, + .end = SMC_IRQ, .flags = IORESOURCE_IRQ, }, }; @@ -38,16 +39,65 @@ static struct resource heartbeat_resources[] = { }, }; +static struct heartbeat_data heartbeat_data = { + .regsize = 16, +}; + static struct platform_device heartbeat_device = { .name = "heartbeat", .id = -1, + .dev = { + .platform_data = &heartbeat_data, + }, .num_resources = ARRAY_SIZE(heartbeat_resources), .resource = heartbeat_resources, }; +static struct mtd_partition nor_flash_partitions[] = { + { + .name = "loader", + .offset = 0x00000000, + .size = 128 * 1024, + }, + { + .name = "rootfs", + .offset = MTDPART_OFS_APPEND, + .size = 31 * 1024 * 1024, + }, + { + .name = "data", + .offset = MTDPART_OFS_APPEND, + .size = MTDPART_SIZ_FULL, + }, +}; + +static struct physmap_flash_data nor_flash_data = { + .width = 2, + .parts = nor_flash_partitions, + .nr_parts = ARRAY_SIZE(nor_flash_partitions), +}; + +static struct resource nor_flash_resources[] = { + [0] = { + .start = 0x00000000, + .end = 0x01ffffff, + .flags = IORESOURCE_MEM, + } +}; + +static struct platform_device nor_flash_device = { + .name = "physmap-flash", + .dev = { + .platform_data = &nor_flash_data, + }, + .num_resources = ARRAY_SIZE(nor_flash_resources), + .resource = nor_flash_resources, +}; + static struct platform_device *sh7343se_platform_devices[] __initdata = { &smc91x_device, &heartbeat_device, + &nor_flash_device, }; static int __init sh7343se_devices_setup(void) @@ -55,10 +105,23 @@ static int __init sh7343se_devices_setup(void) return platform_add_devices(sh7343se_platform_devices, ARRAY_SIZE(sh7343se_platform_devices)); } +device_initcall(sh7343se_devices_setup); +/* + * Initialize the board + */ static void __init sh7343se_setup(char **cmdline_p) { - device_initcall(sh7343se_devices_setup); + ctrl_outw(0xf900, FPGA_OUT); /* FPGA */ + + ctrl_outl(0x00001001, MSTPCR0); + ctrl_outl(0x00000000, MSTPCR1); + ctrl_outl(0xffffbfC0, MSTPCR2); /* LCDC, BEU, CEU, VEU, KEYSC */ + + ctrl_outw(0x0002, PORT_PECR); /* PORT E 1 = IRQ5 */ + ctrl_outw(0x0020, PORT_PSELD); + + printk(KERN_INFO "MS7343CP01 Setup...done\n"); } /* @@ -90,5 +153,4 @@ static struct sh_machine_vector mv_7343se __initmv = { .mv_outsl = sh7343se_outsl, .mv_init_irq = init_7343se_IRQ, - .mv_irq_demux = shmse_irq_demux, }; diff --git a/arch/sh/configs/se7343_defconfig b/arch/sh/configs/se7343_defconfig index 84c0075e2ad..7b727363844 100644 --- a/arch/sh/configs/se7343_defconfig +++ b/arch/sh/configs/se7343_defconfig @@ -1,40 +1,55 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.18 -# Tue Oct 3 11:46:17 2006 +# Linux kernel version: 2.6.26-rc8 +# Mon Jul 7 13:12:45 2008 # CONFIG_SUPERH=y +CONFIG_SUPERH32=y CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_BUG=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_ARCH_NO_VIRT_TO_BUS=y +CONFIG_ARCH_SUPPORTS_AOUT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # -# Code maturity level options +# General setup # CONFIG_EXPERIMENTAL=y CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y # CONFIG_SWAP is not set CONFIG_SYSVIPC=y -# CONFIG_IPC_NS is not set +CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set -# CONFIG_UTS_NS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +CONFIG_GROUP_SCHED=y +CONFIG_FAIR_GROUP_SCHED=y +# CONFIG_RT_GROUP_SCHED is not set +CONFIG_USER_SCHED=y +# CONFIG_CGROUP_SCHED is not set +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set -CONFIG_INITRAMFS_SOURCE="" +# CONFIG_NAMESPACES is not set +# CONFIG_BLK_DEV_INITRD is not set CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y CONFIG_EMBEDDED=y @@ -46,33 +61,41 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y +CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y # CONFIG_FUTEX is not set +CONFIG_ANON_INODES=y # CONFIG_EPOLL is not set +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y # CONFIG_SHMEM is not set -CONFIG_SLAB=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_HAVE_KPROBES is not set +# CONFIG_HAVE_KRETPROBES is not set +# CONFIG_HAVE_DMA_ATTRS is not set +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SLABINFO=y CONFIG_TINY_SHMEM=y CONFIG_BASE_SMALL=0 -# CONFIG_SLOB is not set - -# -# Loadable module support -# CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set # CONFIG_KMOD is not set - -# -# Block layer -# CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set # # IO Schedulers @@ -86,62 +109,28 @@ CONFIG_DEFAULT_DEADLINE=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="deadline" +CONFIG_CLASSIC_RCU=y # # System type # -CONFIG_SOLUTION_ENGINE=y -# CONFIG_SH_SOLUTION_ENGINE is not set -# CONFIG_SH_7751_SOLUTION_ENGINE is not set -# CONFIG_SH_7300_SOLUTION_ENGINE is not set -CONFIG_SH_7343_SOLUTION_ENGINE=y -# CONFIG_SH_73180_SOLUTION_ENGINE is not set -# CONFIG_SH_7751_SYSTEMH is not set -# CONFIG_SH_HP6XX is not set -# CONFIG_SH_EC3104 is not set -# CONFIG_SH_SATURN is not set -# CONFIG_SH_DREAMCAST is not set -# CONFIG_SH_BIGSUR is not set -# CONFIG_SH_MPC1211 is not set -# CONFIG_SH_SH03 is not set -# CONFIG_SH_SECUREEDGE5410 is not set -# CONFIG_SH_HS7751RVOIP is not set -# CONFIG_SH_7710VOIPGW is not set -# CONFIG_SH_RTS7751R2D is not set -# CONFIG_SH_R7780RP is not set -# CONFIG_SH_EDOSK7705 is not set -# CONFIG_SH_SH4202_MICRODEV is not set -# CONFIG_SH_LANDISK is not set -# CONFIG_SH_TITAN is not set -# CONFIG_SH_SHMIN is not set -# CONFIG_SH_UNKNOWN is not set - -# -# Processor selection -# CONFIG_CPU_SH4=y CONFIG_CPU_SH4A=y CONFIG_CPU_SH4AL_DSP=y - -# -# SH-2 Processor Support -# -# CONFIG_CPU_SUBTYPE_SH7604 is not set - -# -# SH-3 Processor Support -# -# CONFIG_CPU_SUBTYPE_SH7300 is not set +# CONFIG_CPU_SUBTYPE_SH7619 is not set +# CONFIG_CPU_SUBTYPE_SH7203 is not set +# CONFIG_CPU_SUBTYPE_SH7206 is not set +# CONFIG_CPU_SUBTYPE_SH7263 is not set +# CONFIG_CPU_SUBTYPE_MXG is not set # CONFIG_CPU_SUBTYPE_SH7705 is not set # CONFIG_CPU_SUBTYPE_SH7706 is not set # CONFIG_CPU_SUBTYPE_SH7707 is not set # CONFIG_CPU_SUBTYPE_SH7708 is not set # CONFIG_CPU_SUBTYPE_SH7709 is not set # CONFIG_CPU_SUBTYPE_SH7710 is not set - -# -# SH-4 Processor Support -# +# CONFIG_CPU_SUBTYPE_SH7712 is not set +# CONFIG_CPU_SUBTYPE_SH7720 is not set +# CONFIG_CPU_SUBTYPE_SH7721 is not set # CONFIG_CPU_SUBTYPE_SH7750 is not set # CONFIG_CPU_SUBTYPE_SH7091 is not set # CONFIG_CPU_SUBTYPE_SH7750R is not set @@ -150,67 +139,88 @@ CONFIG_CPU_SH4AL_DSP=y # CONFIG_CPU_SUBTYPE_SH7751R is not set # CONFIG_CPU_SUBTYPE_SH7760 is not set # CONFIG_CPU_SUBTYPE_SH4_202 is not set - -# -# ST40 Processor Support -# -# CONFIG_CPU_SUBTYPE_ST40STB1 is not set -# CONFIG_CPU_SUBTYPE_ST40GX1 is not set - -# -# SH-4A Processor Support -# +# CONFIG_CPU_SUBTYPE_SH7723 is not set +# CONFIG_CPU_SUBTYPE_SH7763 is not set # CONFIG_CPU_SUBTYPE_SH7770 is not set # CONFIG_CPU_SUBTYPE_SH7780 is not set - -# -# SH4AL-DSP Processor Support -# -# CONFIG_CPU_SUBTYPE_SH73180 is not set +# CONFIG_CPU_SUBTYPE_SH7785 is not set +# CONFIG_CPU_SUBTYPE_SHX3 is not set CONFIG_CPU_SUBTYPE_SH7343=y +# CONFIG_CPU_SUBTYPE_SH7722 is not set +# CONFIG_CPU_SUBTYPE_SH7366 is not set +# CONFIG_CPU_SUBTYPE_SH5_101 is not set +# CONFIG_CPU_SUBTYPE_SH5_103 is not set # # Memory management options # +CONFIG_QUICKLIST=y CONFIG_MMU=y CONFIG_PAGE_OFFSET=0x80000000 CONFIG_MEMORY_START=0x0c000000 CONFIG_MEMORY_SIZE=0x01000000 -CONFIG_32BIT=y +CONFIG_29BIT=y CONFIG_VSYSCALL=y +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_DEFAULT=y +CONFIG_MAX_ACTIVE_REGIONS=1 +CONFIG_ARCH_POPULATES_NODE_MAP=y +CONFIG_ARCH_SELECT_MEMORY_MODEL=y +CONFIG_PAGE_SIZE_4KB=y +# CONFIG_PAGE_SIZE_8KB is not set +# CONFIG_PAGE_SIZE_16KB is not set +# CONFIG_PAGE_SIZE_64KB is not set CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPARSEMEM_STATIC=y +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_NR_QUICK=2 # # Cache configuration # # CONFIG_SH_DIRECT_MAPPED is not set -# CONFIG_SH_WRITETHROUGH is not set -# CONFIG_SH_OCRAM is not set +CONFIG_CACHE_WRITEBACK=y +# CONFIG_CACHE_WRITETHROUGH is not set +# CONFIG_CACHE_OFF is not set # # Processor features # CONFIG_CPU_LITTLE_ENDIAN=y -# CONFIG_SH_FPU is not set +# CONFIG_CPU_BIG_ENDIAN is not set # CONFIG_SH_FPU_EMU is not set CONFIG_SH_DSP=y # CONFIG_SH_STORE_QUEUES is not set CONFIG_CPU_HAS_INTEVT=y CONFIG_CPU_HAS_SR_RB=y +CONFIG_CPU_HAS_DSP=y + +# +# Board support +# +CONFIG_SOLUTION_ENGINE=y +CONFIG_SH_7343_SOLUTION_ENGINE=y # -# Timer support +# Timer and clock configuration # CONFIG_SH_TMU=y +CONFIG_SH_TIMER_IRQ=16 CONFIG_SH_PCLK_FREQ=27000000 +# CONFIG_TICK_ONESHOT is not set +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y # # CPU Frequency scaling @@ -225,56 +235,49 @@ CONFIG_SH_PCLK_FREQ=27000000 # # Companion Chips # -# CONFIG_HD6446X_SERIES is not set + +# +# Additional SuperH Device Drivers +# CONFIG_HEARTBEAT=y +# CONFIG_PUSH_SWITCH is not set # # Kernel features # # CONFIG_HZ_100 is not set CONFIG_HZ_250=y +# CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=250 +# CONFIG_SCHED_HRTICK is not set # CONFIG_KEXEC is not set -# CONFIG_SMP is not set +# CONFIG_CRASH_DUMP is not set CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set +CONFIG_GUSA=y # # Boot options # CONFIG_ZERO_PAGE_OFFSET=0x00001000 CONFIG_BOOT_LINK_OFFSET=0x00800000 -# CONFIG_UBC_WAKEUP is not set # CONFIG_CMDLINE_BOOL is not set # # Bus options # -# CONFIG_PCI is not set - -# -# PCCARD (PCMCIA/CardBus) support -# +# CONFIG_CF_ENABLER is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set # CONFIG_PCCARD is not set -# -# PCI Hotplug Support -# - # # Executable file formats # CONFIG_BINFMT_ELF=y -# CONFIG_BINFMT_FLAT is not set # CONFIG_BINFMT_MISC is not set -# -# Power management options (EXPERIMENTAL) -# -# CONFIG_PM is not set - # # Networking # @@ -283,22 +286,20 @@ CONFIG_NET=y # # Networking options # -# CONFIG_NETDEBUG is not set CONFIG_PACKET=y CONFIG_PACKET_MMAP=y CONFIG_UNIX=y CONFIG_XFRM=y # CONFIG_XFRM_USER is not set # CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set # CONFIG_NET_KEY is not set CONFIG_INET=y # CONFIG_IP_MULTICAST is not set # CONFIG_IP_ADVANCED_ROUTER is not set CONFIG_IP_FIB_HASH=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -# CONFIG_IP_PNP_BOOTP is not set -# CONFIG_IP_PNP_RARP is not set +# CONFIG_IP_PNP is not set # CONFIG_NET_IPIP is not set # CONFIG_NET_IPGRE is not set # CONFIG_ARPD is not set @@ -310,29 +311,18 @@ CONFIG_SYN_COOKIES=y # CONFIG_INET_TUNNEL is not set CONFIG_INET_XFRM_MODE_TRANSPORT=y CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_LRO is not set # CONFIG_INET_DIAG is not set # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set - -# -# DCCP Configuration (EXPERIMENTAL) -# # CONFIG_IP_DCCP is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# # CONFIG_IP_SCTP is not set - -# -# TIPC Configuration (EXPERIMENTAL) -# # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -345,10 +335,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# # CONFIG_NET_SCHED is not set # @@ -356,9 +342,20 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set # # Device Drivers @@ -367,36 +364,32 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # # Generic Driver Options # +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y # CONFIG_SYS_HYPERVISOR is not set - -# -# Connector - unified userspace <-> kernelspace linker -# # CONFIG_CONNECTOR is not set - -# -# Memory Technology Devices (MTD) -# CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set CONFIG_MTD_CONCAT=y CONFIG_MTD_PARTITIONS=y # CONFIG_MTD_REDBOOT_PARTS is not set # CONFIG_MTD_CMDLINE_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set # # User Modules And Translation Layers # CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y CONFIG_MTD_BLOCK=y # CONFIG_FTL is not set # CONFIG_NFTL is not set # CONFIG_INFTL is not set # CONFIG_RFD_FTL is not set # CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set # # RAM/ROM/Flash chip drivers @@ -422,13 +415,15 @@ CONFIG_MTD_CFI_UTIL=y CONFIG_MTD_RAM=y # CONFIG_MTD_ROM is not set # CONFIG_MTD_ABSENT is not set -# CONFIG_MTD_OBSOLETE_CHIPS is not set # # Mapping drivers for chip access # # CONFIG_MTD_COMPLEX_MAPPINGS is not set -# CONFIG_MTD_PHYSMAP is not set +CONFIG_MTD_PHYSMAP=y +CONFIG_MTD_PHYSMAP_START=0x0 +CONFIG_MTD_PHYSMAP_LEN=0 +CONFIG_MTD_PHYSMAP_BANKWIDTH=0 # CONFIG_MTD_PLATRAM is not set # @@ -445,130 +440,101 @@ CONFIG_MTD_RAM=y # CONFIG_MTD_DOC2000 is not set # CONFIG_MTD_DOC2001 is not set # CONFIG_MTD_DOC2001PLUS is not set - -# -# NAND Flash Device Drivers -# # CONFIG_MTD_NAND is not set - -# -# OneNAND Flash Device Drivers -# # CONFIG_MTD_ONENAND is not set # -# Parallel port support +# UBI - Unsorted block images # +# CONFIG_MTD_UBI is not set # CONFIG_PARPORT is not set - -# -# Plug and Play support -# - -# -# Block devices -# +CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set # CONFIG_BLK_DEV_LOOP is not set # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_RAM is not set -# CONFIG_BLK_DEV_INITRD is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set - -# -# ATA/ATAPI/MFM/RLL support -# +# CONFIG_MISC_DEVICES is not set +CONFIG_HAVE_IDE=y # CONFIG_IDE is not set # # SCSI device support # # CONFIG_RAID_ATTRS is not set -# CONFIG_SCSI is not set +CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set # CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y # -# Serial ATA (prod) and Parallel ATA (experimental) drivers -# -# CONFIG_ATA is not set - -# -# Multi-device support (RAID and LVM) -# -# CONFIG_MD is not set - -# -# Fusion MPT device support -# -# CONFIG_FUSION is not set - -# -# IEEE 1394 (FireWire) support +# SCSI support type (disk, tape, CD-ROM) # +# CONFIG_BLK_DEV_SD is not set +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +# CONFIG_CHR_DEV_SG is not set +# CONFIG_CHR_DEV_SCH is not set # -# I2O device support +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs # +CONFIG_SCSI_MULTI_LUN=y +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m # -# Network device support +# SCSI Transports # +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set +# CONFIG_SCSI_LOWLEVEL is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set - -# -# PHY device support -# +# CONFIG_VETH is not set # CONFIG_PHYLIB is not set - -# -# Ethernet (10 or 100Mbit) -# CONFIG_NET_ETHERNET=y CONFIG_MII=y +# CONFIG_AX88796 is not set # CONFIG_STNIC is not set CONFIG_SMC91X=y +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_B44 is not set +CONFIG_NETDEV_1000=y +# CONFIG_E1000E_ENABLED is not set +CONFIG_NETDEV_10000=y # -# Ethernet (1000 Mbit) -# - -# -# Ethernet (10000 Mbit) -# - -# -# Token Ring devices -# - -# -# Wireless LAN (non-hamradio) -# -# CONFIG_NET_RADIO is not set - -# -# Wan interfaces +# Wireless LAN # +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # CONFIG_WAN is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set -# CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set - -# -# ISDN subsystem -# # CONFIG_ISDN is not set - -# -# Telephony Support -# # CONFIG_PHONE is not set # @@ -576,13 +542,13 @@ CONFIG_SMC91X=y # CONFIG_INPUT=y # CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set # # Userland interfaces # # CONFIG_INPUT_MOUSEDEV is not set # CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set # CONFIG_INPUT_EVDEV is not set # CONFIG_INPUT_EVBUG is not set @@ -592,6 +558,7 @@ CONFIG_INPUT=y # CONFIG_INPUT_KEYBOARD is not set # CONFIG_INPUT_MOUSE is not set # CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set # CONFIG_INPUT_TOUCHSCREEN is not set # CONFIG_INPUT_MISC is not set @@ -608,6 +575,7 @@ CONFIG_VT=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y # CONFIG_VT_HW_CONSOLE_BINDING is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # @@ -626,147 +594,102 @@ CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_UNIX98_PTYS is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 - -# -# IPMI -# # CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -# CONFIG_WATCHDOG is not set CONFIG_HW_RANDOM=y -# CONFIG_GEN_RTC is not set -# CONFIG_DTLK is not set # CONFIG_R3964 is not set - -# -# Ftape, the floppy tape device driver -# # CONFIG_RAW_DRIVER is not set - -# -# TPM devices -# # CONFIG_TCG_TPM is not set -# CONFIG_TELCLOCK is not set - -# -# I2C support -# -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=y - -# -# I2C Algorithms -# -# CONFIG_I2C_ALGOBIT is not set -# CONFIG_I2C_ALGOPCF is not set -# CONFIG_I2C_ALGOPCA is not set - -# -# I2C Hardware Bus support -# -# CONFIG_I2C_OCORES is not set -# CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_STUB is not set -# CONFIG_I2C_PCA_ISA is not set - -# -# Miscellaneous I2C Chip support -# -# CONFIG_SENSORS_DS1337 is not set -# CONFIG_SENSORS_DS1374 is not set -# CONFIG_SENSORS_EEPROM is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_MAX6875 is not set -# CONFIG_I2C_DEBUG_CORE is not set -# CONFIG_I2C_DEBUG_ALGO is not set -# CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_I2C_DEBUG_CHIP is not set - -# -# SPI support -# +# CONFIG_I2C is not set # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set +# CONFIG_WATCHDOG is not set # -# Dallas's 1-wire bus +# Sonics Silicon Backplane # +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set # -# Hardware Monitoring support +# Multifunction device drivers # -# CONFIG_HWMON is not set -# CONFIG_HWMON_VID is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # -# Misc devices +# Multimedia devices # # -# Multimedia devices +# Multimedia core support # CONFIG_VIDEO_DEV=y -CONFIG_VIDEO_V4L1=y +CONFIG_VIDEO_V4L2_COMMON=y +CONFIG_VIDEO_ALLOW_V4L1=y CONFIG_VIDEO_V4L1_COMPAT=y -CONFIG_VIDEO_V4L2=y - -# -# Video Capture Adapters -# +# CONFIG_DVB_CORE is not set +CONFIG_VIDEO_MEDIA=y # -# Video Capture Adapters +# Multimedia drivers # +# CONFIG_MEDIA_ATTACH is not set +CONFIG_VIDEO_V4L2=y +CONFIG_VIDEO_V4L1=y +CONFIG_VIDEO_CAPTURE_DRIVERS=y # CONFIG_VIDEO_ADV_DEBUG is not set CONFIG_VIDEO_HELPER_CHIPS_AUTO=y # CONFIG_VIDEO_VIVI is not set # CONFIG_VIDEO_CPIA is not set -# CONFIG_VIDEO_SAA5246A is not set -# CONFIG_VIDEO_SAA5249 is not set -# CONFIG_TUNER_3036 is not set - -# -# Radio Adapters -# - -# -# Digital Video Broadcasting Devices -# -# CONFIG_DVB is not set +# CONFIG_SOC_CAMERA is not set +CONFIG_RADIO_ADAPTERS=y +# CONFIG_DAB is not set # # Graphics support # -CONFIG_FIRMWARE_EDID=y +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set CONFIG_FB=y +CONFIG_FIRMWARE_EDID=y +# CONFIG_FB_DDC is not set # CONFIG_FB_CFB_FILLRECT is not set # CONFIG_FB_CFB_COPYAREA is not set # CONFIG_FB_CFB_IMAGEBLIT is not set +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_FOREIGN_ENDIAN is not set +# CONFIG_FB_SYS_FOPS is not set +# CONFIG_FB_SVGALIB is not set # CONFIG_FB_MACMODES is not set # CONFIG_FB_BACKLIGHT is not set # CONFIG_FB_MODE_HELPERS is not set # CONFIG_FB_TILEBLITTING is not set -# CONFIG_FB_EPSON1355 is not set + +# +# Frame buffer hardware drivers +# # CONFIG_FB_S1D13XXX is not set # CONFIG_FB_VIRTUAL is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # -# Console display driver support +# Display device support # -CONFIG_DUMMY_CONSOLE=y -# CONFIG_FRAMEBUFFER_CONSOLE is not set +# CONFIG_DISPLAY_SUPPORT is not set # -# Logo configuration +# Console display driver support # +CONFIG_DUMMY_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE is not set # CONFIG_LOGO is not set -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Sound @@ -802,85 +725,63 @@ CONFIG_SND_VERBOSE_PROCFS=y # CONFIG_SND_MPU401 is not set # -# Open Sound System +# SUPERH devices # -# CONFIG_SOUND_PRIME is not set # -# USB support +# System on Chip audio support # -# CONFIG_USB_ARCH_HAS_HCD is not set -# CONFIG_USB_ARCH_HAS_OHCI is not set -# CONFIG_USB_ARCH_HAS_EHCI is not set +# CONFIG_SND_SOC is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# SoC Audio support for SuperH # # -# USB Gadget Support +# ALSA SoC audio for Freescale SOCs # -# CONFIG_USB_GADGET is not set # -# MMC/SD Card support +# SoC Audio for the Texas Instruments OMAP # -# CONFIG_MMC is not set # -# LED devices +# Open Sound System # +# CONFIG_SOUND_PRIME is not set +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +# CONFIG_HID_DEBUG is not set +# CONFIG_HIDRAW is not set +# CONFIG_USB_SUPPORT is not set +# CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set - -# -# LED drivers -# - -# -# LED Triggers -# - -# -# InfiniBand support -# - -# -# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) -# - -# -# Real Time Clock -# +# CONFIG_ACCESSIBILITY is not set # CONFIG_RTC_CLASS is not set - -# -# DMA Engine support -# -# CONFIG_DMA_ENGINE is not set - -# -# DMA Clients -# - -# -# DMA Devices -# +# CONFIG_UIO is not set # # File systems # -# CONFIG_EXT2_FS is not set -# CONFIG_EXT3_FS is not set +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +CONFIG_EXT3_FS_XATTR=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +# CONFIG_EXT3_FS_SECURITY is not set +# CONFIG_EXT4DEV_FS is not set +CONFIG_JBD=y +CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set +# CONFIG_DNOTIFY is not set # CONFIG_INOTIFY is not set # CONFIG_QUOTA is not set -# CONFIG_DNOTIFY is not set # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set @@ -909,7 +810,6 @@ CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLBFS is not set # CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y # CONFIG_CONFIGFS_FS is not set # @@ -922,40 +822,39 @@ CONFIG_RAMFS=y # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set -# CONFIG_JFFS_FS is not set CONFIG_JFFS2_FS=y CONFIG_JFFS2_FS_DEBUG=0 CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set # CONFIG_JFFS2_SUMMARY is not set # CONFIG_JFFS2_FS_XATTR is not set # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set CONFIG_JFFS2_ZLIB=y +# CONFIG_JFFS2_LZO is not set CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set -# CONFIG_CRAMFS is not set +CONFIG_CRAMFS=y # CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set - -# -# Network File Systems -# +CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set CONFIG_NFSD=y # CONFIG_NFSD_V3 is not set -# CONFIG_NFSD_TCP is not set -CONFIG_ROOT_NFS=y +# CONFIG_NFSD_V4 is not set CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_EXPORTFS=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y +# CONFIG_SUNRPC_BIND34 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -963,56 +862,130 @@ CONFIG_SUNRPC=y # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set -# CONFIG_9P_FS is not set # # Partition Types # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y - -# -# Native Language Support -# # CONFIG_NLS is not set - -# -# Profiling support -# -# CONFIG_PROFILING is not set +# CONFIG_DLM is not set # # Kernel hacking # +CONFIG_TRACE_IRQFLAGS_SUPPORT=y # CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set -CONFIG_LOG_BUF_SHIFT=14 # CONFIG_DEBUG_BUGVERBOSE is not set -# CONFIG_DEBUG_FS is not set +# CONFIG_SAMPLES is not set # CONFIG_SH_STANDARD_BIOS is not set -# CONFIG_EARLY_SCIF_CONSOLE is not set -# CONFIG_KGDB is not set +CONFIG_EARLY_SCIF_CONSOLE=y +CONFIG_EARLY_SCIF_CONSOLE_PORT=0xffe00000 +CONFIG_EARLY_PRINTK=y +# CONFIG_SH_KGDB is not set # # Security options # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +# CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +# CONFIG_CRYPTO_CBC is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_MD4 is not set +# CONFIG_CRYPTO_MD5 is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set # -# Cryptographic options +# Compression # -# CONFIG_CRYPTO is not set +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_LZO is not set +CONFIG_CRYPTO_HW=y # # Library routines # +CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y +# CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/include/asm-sh/se7343.h b/include/asm-sh/se7343.h index e7914a54aa9..8d2af779fbc 100644 --- a/include/asm-sh/se7343.h +++ b/include/asm-sh/se7343.h @@ -59,24 +59,95 @@ #define PA_LCD1 0xb8000000 #define PA_LCD2 0xb8800000 +#define PORT_PACR 0xA4050100 +#define PORT_PBCR 0xA4050102 +#define PORT_PCCR 0xA4050104 +#define PORT_PDCR 0xA4050106 +#define PORT_PECR 0xA4050108 +#define PORT_PFCR 0xA405010A +#define PORT_PGCR 0xA405010C +#define PORT_PHCR 0xA405010E +#define PORT_PJCR 0xA4050110 +#define PORT_PKCR 0xA4050112 +#define PORT_PLCR 0xA4050114 +#define PORT_PMCR 0xA4050116 +#define PORT_PNCR 0xA4050118 +#define PORT_PQCR 0xA405011A +#define PORT_PRCR 0xA405011C +#define PORT_PSCR 0xA405011E +#define PORT_PTCR 0xA4050140 +#define PORT_PUCR 0xA4050142 +#define PORT_PVCR 0xA4050144 +#define PORT_PWCR 0xA4050146 +#define PORT_PYCR 0xA4050148 +#define PORT_PZCR 0xA405014A + +#define PORT_PSELA 0xA405014C +#define PORT_PSELB 0xA405014E +#define PORT_PSELC 0xA4050150 +#define PORT_PSELD 0xA4050152 +#define PORT_PSELE 0xA4050154 + +#define PORT_HIZCRA 0xA4050156 +#define PORT_HIZCRB 0xA4050158 +#define PORT_HIZCRC 0xA405015C + +#define PORT_DRVCR 0xA4050180 + +#define PORT_PADR 0xA4050120 +#define PORT_PBDR 0xA4050122 +#define PORT_PCDR 0xA4050124 +#define PORT_PDDR 0xA4050126 +#define PORT_PEDR 0xA4050128 +#define PORT_PFDR 0xA405012A +#define PORT_PGDR 0xA405012C +#define PORT_PHDR 0xA405012E +#define PORT_PJDR 0xA4050130 +#define PORT_PKDR 0xA4050132 +#define PORT_PLDR 0xA4050134 +#define PORT_PMDR 0xA4050136 +#define PORT_PNDR 0xA4050138 +#define PORT_PQDR 0xA405013A +#define PORT_PRDR 0xA405013C +#define PORT_PTDR 0xA4050160 +#define PORT_PUDR 0xA4050162 +#define PORT_PVDR 0xA4050164 +#define PORT_PWDR 0xA4050166 +#define PORT_PYDR 0xA4050168 + +#define MSTPCR0 0xA4150030 +#define MSTPCR1 0xA4150034 +#define MSTPCR2 0xA4150038 + +#define FPGA_IN 0xb1400000 +#define FPGA_OUT 0xb1400002 + #define __IO_PREFIX sh7343se #include -/* External Multiplexed interrupts */ -#define PC_IRQ0 OFFCHIP_IRQ_BASE -#define PC_IRQ1 (PC_IRQ0 + 1) -#define PC_IRQ2 (PC_IRQ1 + 1) -#define PC_IRQ3 (PC_IRQ2 + 1) +#define IRQ0_IRQ 32 +#define IRQ1_IRQ 33 +#define IRQ4_IRQ 36 +#define IRQ5_IRQ 37 + +#define SE7343_FPGA_IRQ_MRSHPC0 0 +#define SE7343_FPGA_IRQ_MRSHPC1 1 +#define SE7343_FPGA_IRQ_MRSHPC2 2 +#define SE7343_FPGA_IRQ_MRSHPC3 3 +#define SE7343_FPGA_IRQ_SMC 6 /* EXT_IRQ2 */ +#define SE7343_FPGA_IRQ_USB 8 -#define EXT_IRQ0 (PC_IRQ3 + 1) -#define EXT_IRQ1 (EXT_IRQ0 + 1) -#define EXT_IRQ2 (EXT_IRQ1 + 1) -#define EXT_IRQ3 (EXT_IRQ2 + 1) +#define SE7343_FPGA_IRQ_NR 11 +#define SE7343_FPGA_IRQ_BASE 120 -#define USB_IRQ0 (EXT_IRQ3 + 1) -#define USB_IRQ1 (USB_IRQ0 + 1) +#define MRSHPC_IRQ3 (SE7343_FPGA_IRQ_BASE + SE7343_FPGA_IRQ_MRSHPC3) +#define MRSHPC_IRQ2 (SE7343_FPGA_IRQ_BASE + SE7343_FPGA_IRQ_MRSHPC2) +#define MRSHPC_IRQ1 (SE7343_FPGA_IRQ_BASE + SE7343_FPGA_IRQ_MRSHPC1) +#define MRSHPC_IRQ0 (SE7343_FPGA_IRQ_BASE + SE7343_FPGA_IRQ_MRSHPC0) +#define SMC_IRQ (SE7343_FPGA_IRQ_BASE + SE7343_FPGA_IRQ_SMC) +#define USB_IRQ (SE7343_FPGA_IRQ_BASE + SE7343_FPGA_IRQ_USB) -#define UART_IRQ0 (USB_IRQ1 + 1) -#define UART_IRQ1 (UART_IRQ0 + 1) +/* arch/sh/boards/se/7343/irq.c */ +void init_7343se_IRQ(void); #endif /* __ASM_SH_HITACHI_SE7343_H */ -- cgit v1.2.3-70-g09d2 From cbe9da029d9cc4fff59d559789885079a84a0af8 Mon Sep 17 00:00:00 2001 From: Yoshihiro Shimoda Date: Wed, 16 Jul 2008 20:21:09 +0900 Subject: sh: Renesas R0P7785LC0011RL board support This adds initial support for the Renesas R0P7785LC0011RL board. This patch supports 29bit address mode only. Signed-off-by: Yoshihiro Shimoda Signed-off-by: Paul Mundt --- arch/sh/Kconfig | 15 + arch/sh/Makefile | 1 + arch/sh/boards/renesas/sh7785lcr/Makefile | 1 + arch/sh/boards/renesas/sh7785lcr/setup.c | 302 +++++++ arch/sh/configs/sh7785lcr_defconfig | 1388 +++++++++++++++++++++++++++++ arch/sh/drivers/pci/Makefile | 1 + arch/sh/drivers/pci/fixups-sh7785lcr.c | 46 + arch/sh/drivers/pci/ops-sh7785lcr.c | 66 ++ arch/sh/tools/mach-types | 1 + include/asm-sh/sh7785lcr.h | 55 ++ 10 files changed, 1876 insertions(+) create mode 100644 arch/sh/boards/renesas/sh7785lcr/Makefile create mode 100644 arch/sh/boards/renesas/sh7785lcr/setup.c create mode 100644 arch/sh/configs/sh7785lcr_defconfig create mode 100644 arch/sh/drivers/pci/fixups-sh7785lcr.c create mode 100644 arch/sh/drivers/pci/ops-sh7785lcr.c create mode 100644 include/asm-sh/sh7785lcr.h (limited to 'arch/sh/boards') diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig index 5f84552ecb7..a90b73f72f3 100644 --- a/arch/sh/Kconfig +++ b/arch/sh/Kconfig @@ -495,6 +495,21 @@ config SH_HIGHLANDER select SYS_SUPPORTS_PCI select IO_TRAPPED +config SH_SH7785LCR + bool "SH7785LCR" + depends on CPU_SUBTYPE_SH7785 + select SYS_SUPPORTS_PCI + select IO_TRAPPED + +config SH_SH7785LCR_29BIT_PHYSMAPS + bool "SH7785LCR 29bit physmaps" + depends on SH_SH7785LCR + default y + help + This board has 2 physical memory maps. It can be changed with + DIP switch(S2-5). If you set the DIP switch for S2-5 = ON, + you can access all on-board device in 29bit address mode. + config SH_MIGOR bool "Migo-R" depends on CPU_SUBTYPE_SH7722 diff --git a/arch/sh/Makefile b/arch/sh/Makefile index 1452c4df7de..c627e45c4df 100644 --- a/arch/sh/Makefile +++ b/arch/sh/Makefile @@ -124,6 +124,7 @@ machdir-$(CONFIG_SH_X3PROTO) += renesas/x3proto machdir-$(CONFIG_SH_RSK7203) += renesas/rsk7203 machdir-$(CONFIG_SH_AP325RXA) += renesas/ap325rxa machdir-$(CONFIG_SH_SH7763RDP) += renesas/sh7763rdp +machdir-$(CONFIG_SH_SH7785LCR) += renesas/sh7785lcr machdir-$(CONFIG_SH_SH4202_MICRODEV) += superh/microdev machdir-$(CONFIG_SH_LANDISK) += landisk machdir-$(CONFIG_SH_TITAN) += titan diff --git a/arch/sh/boards/renesas/sh7785lcr/Makefile b/arch/sh/boards/renesas/sh7785lcr/Makefile new file mode 100644 index 00000000000..77037567633 --- /dev/null +++ b/arch/sh/boards/renesas/sh7785lcr/Makefile @@ -0,0 +1 @@ +obj-y := setup.o diff --git a/arch/sh/boards/renesas/sh7785lcr/setup.c b/arch/sh/boards/renesas/sh7785lcr/setup.c new file mode 100644 index 00000000000..b95d674ee70 --- /dev/null +++ b/arch/sh/boards/renesas/sh7785lcr/setup.c @@ -0,0 +1,302 @@ +/* + * Renesas Technology Corp. R0P7785LC0011RL Support. + * + * Copyright (C) 2008 Yoshihiro Shimoda + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* + * NOTE: This board has 2 physical memory maps. + * Please look at include/asm-sh/sh7785lcr.h or hardware manual. + */ +static struct resource heartbeat_resources[] = { + [0] = { + .start = PLD_LEDCR, + .end = PLD_LEDCR, + .flags = IORESOURCE_MEM, + }, +}; + +static struct heartbeat_data heartbeat_data = { + .regsize = 8, +}; + +static struct platform_device heartbeat_device = { + .name = "heartbeat", + .id = -1, + .dev = { + .platform_data = &heartbeat_data, + }, + .num_resources = ARRAY_SIZE(heartbeat_resources), + .resource = heartbeat_resources, +}; + +static struct mtd_partition nor_flash_partitions[] = { + { + .name = "loader", + .offset = 0x00000000, + .size = 512 * 1024, + }, + { + .name = "bootenv", + .offset = MTDPART_OFS_APPEND, + .size = 512 * 1024, + }, + { + .name = "kernel", + .offset = MTDPART_OFS_APPEND, + .size = 4 * 1024 * 1024, + }, + { + .name = "data", + .offset = MTDPART_OFS_APPEND, + .size = MTDPART_SIZ_FULL, + }, +}; + +static struct physmap_flash_data nor_flash_data = { + .width = 4, + .parts = nor_flash_partitions, + .nr_parts = ARRAY_SIZE(nor_flash_partitions), +}; + +static struct resource nor_flash_resources[] = { + [0] = { + .start = NOR_FLASH_ADDR, + .end = NOR_FLASH_ADDR + NOR_FLASH_SIZE - 1, + .flags = IORESOURCE_MEM, + } +}; + +static struct platform_device nor_flash_device = { + .name = "physmap-flash", + .dev = { + .platform_data = &nor_flash_data, + }, + .num_resources = ARRAY_SIZE(nor_flash_resources), + .resource = nor_flash_resources, +}; + +static struct resource r8a66597_usb_host_resources[] = { + [0] = { + .name = "r8a66597_hcd", + .start = R8A66597_ADDR, + .end = R8A66597_ADDR + R8A66597_SIZE - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .name = "r8a66597_hcd", + .start = 2, + .end = 2, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device r8a66597_usb_host_device = { + .name = "r8a66597_hcd", + .id = -1, + .dev = { + .dma_mask = NULL, + .coherent_dma_mask = 0xffffffff, + }, + .num_resources = ARRAY_SIZE(r8a66597_usb_host_resources), + .resource = r8a66597_usb_host_resources, +}; + +static struct resource sm501_resources[] = { + [0] = { + .start = SM107_MEM_ADDR, + .end = SM107_MEM_ADDR + SM107_MEM_SIZE - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = SM107_REG_ADDR, + .end = SM107_REG_ADDR + SM107_REG_SIZE - 1, + .flags = IORESOURCE_MEM, + }, + [2] = { + .start = 10, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct fb_videomode sm501_default_mode_crt = { + .pixclock = 35714, /* 28MHz */ + .xres = 640, + .yres = 480, + .left_margin = 105, + .right_margin = 16, + .upper_margin = 33, + .lower_margin = 10, + .hsync_len = 39, + .vsync_len = 2, + .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, +}; + +static struct fb_videomode sm501_default_mode_pnl = { + .pixclock = 40000, /* 25MHz */ + .xres = 640, + .yres = 480, + .left_margin = 2, + .right_margin = 16, + .upper_margin = 33, + .lower_margin = 10, + .hsync_len = 39, + .vsync_len = 2, + .sync = 0, +}; + +static struct sm501_platdata_fbsub sm501_pdata_fbsub_pnl = { + .def_bpp = 16, + .def_mode = &sm501_default_mode_pnl, + .flags = SM501FB_FLAG_USE_INIT_MODE | + SM501FB_FLAG_USE_HWCURSOR | + SM501FB_FLAG_USE_HWACCEL | + SM501FB_FLAG_DISABLE_AT_EXIT | + SM501FB_FLAG_PANEL_NO_VBIASEN, +}; + +static struct sm501_platdata_fbsub sm501_pdata_fbsub_crt = { + .def_bpp = 16, + .def_mode = &sm501_default_mode_crt, + .flags = SM501FB_FLAG_USE_INIT_MODE | + SM501FB_FLAG_USE_HWCURSOR | + SM501FB_FLAG_USE_HWACCEL | + SM501FB_FLAG_DISABLE_AT_EXIT, +}; + +static struct sm501_platdata_fb sm501_fb_pdata = { + .fb_route = SM501_FB_OWN, + .fb_crt = &sm501_pdata_fbsub_crt, + .fb_pnl = &sm501_pdata_fbsub_pnl, +}; + +static struct sm501_initdata sm501_initdata = { + .gpio_high = { + .set = 0x00001fe0, + .mask = 0x0, + }, + .devices = 0, + .mclk = 84 * 1000000, + .m1xclk = 112 * 1000000, +}; + +static struct sm501_platdata sm501_platform_data = { + .init = &sm501_initdata, + .fb = &sm501_fb_pdata, +}; + +static struct platform_device sm501_device = { + .name = "sm501", + .id = -1, + .dev = { + .platform_data = &sm501_platform_data, + }, + .num_resources = ARRAY_SIZE(sm501_resources), + .resource = sm501_resources, +}; + +static struct resource i2c_resources[] = { + [0] = { + .start = PCA9564_ADDR, + .end = PCA9564_ADDR + PCA9564_SIZE - 1, + .flags = IORESOURCE_MEM | IORESOURCE_MEM_8BIT, + }, + [1] = { + .start = 12, + .end = 12, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct i2c_pca9564_pf_platform_data i2c_platform_data = { + .gpio = 0, + .i2c_clock_speed = I2C_PCA_CON_330kHz, + .timeout = 100, +}; + +static struct platform_device i2c_device = { + .name = "i2c-pca-platform", + .id = -1, + .dev = { + .platform_data = &i2c_platform_data, + }, + .num_resources = ARRAY_SIZE(i2c_resources), + .resource = i2c_resources, +}; + +static struct platform_device *sh7785lcr_devices[] __initdata = { + &heartbeat_device, + &nor_flash_device, + &r8a66597_usb_host_device, + &sm501_device, + &i2c_device, +}; + +static struct i2c_board_info __initdata sh7785lcr_i2c_devices[] = { + { + I2C_BOARD_INFO("r2025sd", 0x32), + }, +}; + +static int __init sh7785lcr_devices_setup(void) +{ + i2c_register_board_info(0, sh7785lcr_i2c_devices, + ARRAY_SIZE(sh7785lcr_i2c_devices)); + + return platform_add_devices(sh7785lcr_devices, + ARRAY_SIZE(sh7785lcr_devices)); +} +__initcall(sh7785lcr_devices_setup); + +/* Initialize IRQ setting */ +void __init init_sh7785lcr_IRQ(void) +{ + plat_irq_setup_pins(IRQ_MODE_IRQ7654); + plat_irq_setup_pins(IRQ_MODE_IRQ3210); +} + +static void sh7785lcr_power_off(void) +{ + ctrl_outb(0x01, P2SEGADDR(PLD_POFCR)); +} + +/* Initialize the board */ +static void __init sh7785lcr_setup(char **cmdline_p) +{ + void __iomem *sm501_reg; + + printk(KERN_INFO "Renesas Technology Corp. R0P7785LC0011RL support.\n"); + + pm_power_off = sh7785lcr_power_off; + + /* sm501 DRAM configuration */ + sm501_reg = (void __iomem *)0xb3e00000 + SM501_DRAM_CONTROL; + writel(0x000307c2, sm501_reg); +} + +/* + * The Machine Vector + */ +static struct sh_machine_vector mv_sh7785lcr __initmv = { + .mv_name = "SH7785LCR", + .mv_setup = sh7785lcr_setup, + .mv_init_irq = init_sh7785lcr_IRQ, +}; + diff --git a/arch/sh/configs/sh7785lcr_defconfig b/arch/sh/configs/sh7785lcr_defconfig new file mode 100644 index 00000000000..ff72697365d --- /dev/null +++ b/arch/sh/configs/sh7785lcr_defconfig @@ -0,0 +1,1388 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.26-rc8 +# Tue Jul 15 21:37:59 2008 +# +CONFIG_SUPERH=y +CONFIG_SUPERH32=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_BUG=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_SYS_SUPPORTS_NUMA=y +CONFIG_SYS_SUPPORTS_PCI=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_ARCH_NO_VIRT_TO_BUS=y +CONFIG_ARCH_SUPPORTS_AOUT=y +CONFIG_IO_TRAPPED=y +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set +CONFIG_BSD_PROCESS_ACCT=y +# CONFIG_BSD_PROCESS_ACCT_V3 is not set +# CONFIG_TASKSTATS is not set +# CONFIG_AUDIT is not set +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +CONFIG_GROUP_SCHED=y +CONFIG_FAIR_GROUP_SCHED=y +# CONFIG_RT_GROUP_SCHED is not set +CONFIG_USER_SCHED=y +# CONFIG_CGROUP_SCHED is not set +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y +# CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set +# CONFIG_BLK_DEV_INITRD is not set +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_COMPAT_BRK=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +CONFIG_PROFILING=y +# CONFIG_MARKERS is not set +# CONFIG_OPROFILE is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_HAVE_KPROBES is not set +# CONFIG_HAVE_KRETPROBES is not set +# CONFIG_HAVE_DMA_ATTRS is not set +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +CONFIG_DEFAULT_CFQ=y +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="cfq" +CONFIG_CLASSIC_RCU=y + +# +# System type +# +CONFIG_CPU_SH4=y +CONFIG_CPU_SH4A=y +CONFIG_CPU_SHX2=y +# CONFIG_CPU_SUBTYPE_SH7619 is not set +# CONFIG_CPU_SUBTYPE_SH7203 is not set +# CONFIG_CPU_SUBTYPE_SH7206 is not set +# CONFIG_CPU_SUBTYPE_SH7263 is not set +# CONFIG_CPU_SUBTYPE_MXG is not set +# CONFIG_CPU_SUBTYPE_SH7705 is not set +# CONFIG_CPU_SUBTYPE_SH7706 is not set +# CONFIG_CPU_SUBTYPE_SH7707 is not set +# CONFIG_CPU_SUBTYPE_SH7708 is not set +# CONFIG_CPU_SUBTYPE_SH7709 is not set +# CONFIG_CPU_SUBTYPE_SH7710 is not set +# CONFIG_CPU_SUBTYPE_SH7712 is not set +# CONFIG_CPU_SUBTYPE_SH7720 is not set +# CONFIG_CPU_SUBTYPE_SH7721 is not set +# CONFIG_CPU_SUBTYPE_SH7750 is not set +# CONFIG_CPU_SUBTYPE_SH7091 is not set +# CONFIG_CPU_SUBTYPE_SH7750R is not set +# CONFIG_CPU_SUBTYPE_SH7750S is not set +# CONFIG_CPU_SUBTYPE_SH7751 is not set +# CONFIG_CPU_SUBTYPE_SH7751R is not set +# CONFIG_CPU_SUBTYPE_SH7760 is not set +# CONFIG_CPU_SUBTYPE_SH4_202 is not set +# CONFIG_CPU_SUBTYPE_SH7723 is not set +# CONFIG_CPU_SUBTYPE_SH7763 is not set +# CONFIG_CPU_SUBTYPE_SH7770 is not set +# CONFIG_CPU_SUBTYPE_SH7780 is not set +CONFIG_CPU_SUBTYPE_SH7785=y +# CONFIG_CPU_SUBTYPE_SHX3 is not set +# CONFIG_CPU_SUBTYPE_SH7343 is not set +# CONFIG_CPU_SUBTYPE_SH7722 is not set +# CONFIG_CPU_SUBTYPE_SH7366 is not set +# CONFIG_CPU_SUBTYPE_SH5_101 is not set +# CONFIG_CPU_SUBTYPE_SH5_103 is not set + +# +# Memory management options +# +CONFIG_QUICKLIST=y +CONFIG_MMU=y +CONFIG_PAGE_OFFSET=0x80000000 +CONFIG_MEMORY_START=0x08000000 +CONFIG_MEMORY_SIZE=0x08000000 +CONFIG_29BIT=y +# CONFIG_PMB is not set +# CONFIG_X2TLB is not set +CONFIG_VSYSCALL=y +# CONFIG_NUMA is not set +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_DEFAULT=y +CONFIG_MAX_ACTIVE_REGIONS=2 +CONFIG_ARCH_POPULATES_NODE_MAP=y +CONFIG_ARCH_SELECT_MEMORY_MODEL=y +CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y +CONFIG_PAGE_SIZE_4KB=y +# CONFIG_PAGE_SIZE_8KB is not set +# CONFIG_PAGE_SIZE_16KB is not set +# CONFIG_PAGE_SIZE_64KB is not set +CONFIG_SELECT_MEMORY_MODEL=y +# CONFIG_FLATMEM_MANUAL is not set +# CONFIG_DISCONTIGMEM_MANUAL is not set +CONFIG_SPARSEMEM_MANUAL=y +CONFIG_SPARSEMEM=y +CONFIG_HAVE_MEMORY_PRESENT=y +CONFIG_SPARSEMEM_STATIC=y +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +# CONFIG_MEMORY_HOTPLUG is not set +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_NR_QUICK=2 + +# +# Cache configuration +# +# CONFIG_SH_DIRECT_MAPPED is not set +CONFIG_CACHE_WRITEBACK=y +# CONFIG_CACHE_WRITETHROUGH is not set +# CONFIG_CACHE_OFF is not set + +# +# Processor features +# +CONFIG_CPU_LITTLE_ENDIAN=y +# CONFIG_CPU_BIG_ENDIAN is not set +CONFIG_SH_FPU=y +CONFIG_SH_STORE_QUEUES=y +CONFIG_CPU_HAS_INTEVT=y +CONFIG_CPU_HAS_SR_RB=y +CONFIG_CPU_HAS_PTEA=y +CONFIG_CPU_HAS_FPU=y + +# +# Board support +# +# CONFIG_SH_HIGHLANDER is not set +CONFIG_SH_SH7785LCR=y +CONFIG_SH_SH7785LCR_29BIT_PHYSMAPS=y + +# +# Timer and clock configuration +# +CONFIG_SH_TMU=y +CONFIG_SH_TIMER_IRQ=28 +CONFIG_SH_PCLK_FREQ=50000000 +CONFIG_TICK_ONESHOT=y +# CONFIG_NO_HZ is not set +CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y + +# +# CPU Frequency scaling +# +# CONFIG_CPU_FREQ is not set + +# +# DMA support +# +# CONFIG_SH_DMA is not set + +# +# Companion Chips +# + +# +# Additional SuperH Device Drivers +# +CONFIG_HEARTBEAT=y +# CONFIG_PUSH_SWITCH is not set + +# +# Kernel features +# +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_300 is not set +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +# CONFIG_SCHED_HRTICK is not set +CONFIG_KEXEC=y +# CONFIG_CRASH_DUMP is not set +# CONFIG_PREEMPT_NONE is not set +# CONFIG_PREEMPT_VOLUNTARY is not set +CONFIG_PREEMPT=y +# CONFIG_PREEMPT_RCU is not set +CONFIG_GUSA=y + +# +# Boot options +# +CONFIG_ZERO_PAGE_OFFSET=0x00001000 +CONFIG_BOOT_LINK_OFFSET=0x00800000 +# CONFIG_CMDLINE_BOOL is not set + +# +# Bus options +# +CONFIG_PCI=y +CONFIG_SH_PCIDMA_NONCOHERENT=y +CONFIG_PCI_AUTO=y +CONFIG_PCI_AUTO_UPDATE_RESOURCES=y +# CONFIG_ARCH_SUPPORTS_MSI is not set +CONFIG_PCI_LEGACY=y +# CONFIG_PCI_DEBUG is not set +# CONFIG_PCCARD is not set +# CONFIG_HOTPLUG_PCI is not set + +# +# Executable file formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_MISC is not set + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +CONFIG_IP_ADVANCED_ROUTER=y +CONFIG_ASK_IP_FIB_HASH=y +# CONFIG_IP_FIB_TRIE is not set +CONFIG_IP_FIB_HASH=y +# CONFIG_IP_MULTIPLE_TABLES is not set +# CONFIG_IP_ROUTE_MULTIPATH is not set +# CONFIG_IP_ROUTE_VERBOSE is not set +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +# CONFIG_IP_PNP_BOOTP is not set +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_LRO is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +CONFIG_WIRELESS_EXT=y +# CONFIG_MAC80211 is not set +# CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +CONFIG_MTD_CONCAT=y +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +# CONFIG_MTD_CMDLINE_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_CFI_INTELEXT is not set +CONFIG_MTD_CFI_AMDSTD=y +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +CONFIG_MTD_PHYSMAP=y +CONFIG_MTD_PHYSMAP_START=0x00000000 +CONFIG_MTD_PHYSMAP_LEN=0x0 +CONFIG_MTD_PHYSMAP_BANKWIDTH=0 +# CONFIG_MTD_INTEL_VR_NOR is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_PMC551 is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +# CONFIG_MTD_NAND is not set +# CONFIG_MTD_ONENAND is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_CPQ_CISS_DA is not set +# CONFIG_BLK_DEV_DAC960 is not set +# CONFIG_BLK_DEV_UMEM is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +# CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_SX8 is not set +# CONFIG_BLK_DEV_UB is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=4096 +# CONFIG_BLK_DEV_XIP is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +# CONFIG_MISC_DEVICES is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +# CONFIG_CHR_DEV_SG is not set +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set +# CONFIG_SCSI_LOWLEVEL is not set +CONFIG_ATA=y +# CONFIG_ATA_NONSTANDARD is not set +CONFIG_SATA_PMP=y +# CONFIG_SATA_AHCI is not set +# CONFIG_SATA_SIL24 is not set +CONFIG_ATA_SFF=y +# CONFIG_SATA_SVW is not set +# CONFIG_ATA_PIIX is not set +# CONFIG_SATA_MV is not set +# CONFIG_SATA_NV is not set +# CONFIG_PDC_ADMA is not set +# CONFIG_SATA_QSTOR is not set +# CONFIG_SATA_PROMISE is not set +# CONFIG_SATA_SX4 is not set +CONFIG_SATA_SIL=y +# CONFIG_SATA_SIS is not set +# CONFIG_SATA_ULI is not set +# CONFIG_SATA_VIA is not set +# CONFIG_SATA_VITESSE is not set +# CONFIG_SATA_INIC162X is not set +# CONFIG_PATA_ALI is not set +# CONFIG_PATA_AMD is not set +# CONFIG_PATA_ARTOP is not set +# CONFIG_PATA_ATIIXP is not set +# CONFIG_PATA_CMD640_PCI is not set +# CONFIG_PATA_CMD64X is not set +# CONFIG_PATA_CS5520 is not set +# CONFIG_PATA_CS5530 is not set +# CONFIG_PATA_CYPRESS is not set +# CONFIG_PATA_EFAR is not set +# CONFIG_ATA_GENERIC is not set +# CONFIG_PATA_HPT366 is not set +# CONFIG_PATA_HPT37X is not set +# CONFIG_PATA_HPT3X2N is not set +# CONFIG_PATA_HPT3X3 is not set +# CONFIG_PATA_IT821X is not set +# CONFIG_PATA_IT8213 is not set +# CONFIG_PATA_JMICRON is not set +# CONFIG_PATA_TRIFLEX is not set +# CONFIG_PATA_MARVELL is not set +# CONFIG_PATA_MPIIX is not set +# CONFIG_PATA_OLDPIIX is not set +# CONFIG_PATA_NETCELL is not set +# CONFIG_PATA_NINJA32 is not set +# CONFIG_PATA_NS87410 is not set +# CONFIG_PATA_NS87415 is not set +# CONFIG_PATA_OPTI is not set +# CONFIG_PATA_OPTIDMA is not set +# CONFIG_PATA_PDC_OLD is not set +# CONFIG_PATA_RADISYS is not set +# CONFIG_PATA_RZ1000 is not set +# CONFIG_PATA_SC1200 is not set +# CONFIG_PATA_SERVERWORKS is not set +# CONFIG_PATA_PDC2027X is not set +# CONFIG_PATA_SIL680 is not set +# CONFIG_PATA_SIS is not set +# CONFIG_PATA_VIA is not set +# CONFIG_PATA_WINBOND is not set +# CONFIG_PATA_PLATFORM is not set +# CONFIG_PATA_SCH is not set +# CONFIG_MD is not set +# CONFIG_FUSION is not set + +# +# IEEE 1394 (FireWire) support +# + +# +# Enable only one of the two stacks, unless you know what you are doing +# +# CONFIG_FIREWIRE is not set +# CONFIG_IEEE1394 is not set +# CONFIG_I2O is not set +CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_VETH is not set +# CONFIG_ARCNET is not set +# CONFIG_NET_ETHERNET is not set +CONFIG_NETDEV_1000=y +# CONFIG_ACENIC is not set +# CONFIG_DL2K is not set +# CONFIG_E1000 is not set +# CONFIG_E1000E is not set +# CONFIG_E1000E_ENABLED is not set +# CONFIG_IP1000 is not set +# CONFIG_IGB is not set +# CONFIG_NS83820 is not set +# CONFIG_HAMACHI is not set +# CONFIG_YELLOWFIN is not set +CONFIG_R8169=y +# CONFIG_R8169_NAPI is not set +# CONFIG_SIS190 is not set +# CONFIG_SKGE is not set +# CONFIG_SKY2 is not set +# CONFIG_VIA_VELOCITY is not set +# CONFIG_TIGON3 is not set +# CONFIG_BNX2 is not set +# CONFIG_QLA3XXX is not set +# CONFIG_ATL1 is not set +# CONFIG_NETDEV_10000 is not set +# CONFIG_TR is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET is not set +# CONFIG_WAN is not set +# CONFIG_FDDI is not set +# CONFIG_HIPPI is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_NET_FC is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +# CONFIG_KEYBOARD_ATKBD is not set +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +# CONFIG_KEYBOARD_SH_KEYSC is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +CONFIG_VT_HW_CONSOLE_BINDING=y +CONFIG_DEVKMEM=y +# CONFIG_SERIAL_NONSTANDARD is not set +# CONFIG_NOZOMI is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_SH_SCI=y +CONFIG_SERIAL_SH_SCI_NR_UARTS=6 +CONFIG_SERIAL_SH_SCI_CONSOLE=y +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_IPMI_HANDLER is not set +CONFIG_HW_RANDOM=y +# CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_DEVPORT=y +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +# CONFIG_I2C_CHARDEV is not set +CONFIG_I2C_ALGOPCA=y + +# +# I2C Hardware Bus support +# +# CONFIG_I2C_ALI1535 is not set +# CONFIG_I2C_ALI1563 is not set +# CONFIG_I2C_ALI15X3 is not set +# CONFIG_I2C_AMD756 is not set +# CONFIG_I2C_AMD8111 is not set +# CONFIG_I2C_I801 is not set +# CONFIG_I2C_I810 is not set +# CONFIG_I2C_PIIX4 is not set +# CONFIG_I2C_NFORCE2 is not set +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_PROSAVAGE is not set +# CONFIG_I2C_SAVAGE4 is not set +# CONFIG_I2C_SIMTEC is not set +# CONFIG_I2C_SIS5595 is not set +# CONFIG_I2C_SIS630 is not set +# CONFIG_I2C_SIS96X is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_STUB is not set +# CONFIG_I2C_TINY_USB is not set +# CONFIG_I2C_VIA is not set +# CONFIG_I2C_VIAPRO is not set +# CONFIG_I2C_VOODOO3 is not set +CONFIG_I2C_PCA_PLATFORM=y +# CONFIG_I2C_SH_MOBILE is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_DS1682 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_PCF8575 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set +# CONFIG_SPI is not set +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set +# CONFIG_WATCHDOG is not set + +# +# Sonics Silicon Backplane +# +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +CONFIG_MFD_SM501=y +# CONFIG_HTC_PASIC3 is not set + +# +# Multimedia devices +# + +# +# Multimedia core support +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# +# CONFIG_DAB is not set + +# +# Graphics support +# +# CONFIG_DRM is not set +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +CONFIG_FB=y +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FB_DDC is not set +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_FOREIGN_ENDIAN is not set +# CONFIG_FB_SYS_FOPS is not set +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +# CONFIG_FB_MODE_HELPERS is not set +# CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_CIRRUS is not set +# CONFIG_FB_PM2 is not set +# CONFIG_FB_CYBER2000 is not set +# CONFIG_FB_ASILIANT is not set +# CONFIG_FB_IMSTT is not set +# CONFIG_FB_S1D13XXX is not set +# CONFIG_FB_NVIDIA is not set +# CONFIG_FB_RIVA is not set +# CONFIG_FB_MATROX is not set +# CONFIG_FB_RADEON is not set +# CONFIG_FB_ATY128 is not set +# CONFIG_FB_ATY is not set +# CONFIG_FB_S3 is not set +# CONFIG_FB_SAVAGE is not set +# CONFIG_FB_SIS is not set +# CONFIG_FB_NEOMAGIC is not set +# CONFIG_FB_KYRO is not set +# CONFIG_FB_3DFX is not set +# CONFIG_FB_VOODOO1 is not set +# CONFIG_FB_VT8623 is not set +# CONFIG_FB_TRIDENT is not set +# CONFIG_FB_ARK is not set +# CONFIG_FB_PM3 is not set +CONFIG_FB_SM501=y +# CONFIG_FB_VIRTUAL is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Console display driver support +# +CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set +# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set +# CONFIG_FONTS is not set +CONFIG_FONT_8x8=y +CONFIG_FONT_8x16=y +CONFIG_LOGO=y +# CONFIG_LOGO_LINUX_MONO is not set +# CONFIG_LOGO_LINUX_VGA16 is not set +CONFIG_LOGO_LINUX_CLUT224=y +# CONFIG_LOGO_SUPERH_MONO is not set +# CONFIG_LOGO_SUPERH_VGA16 is not set +# CONFIG_LOGO_SUPERH_CLUT224 is not set + +# +# Sound +# +# CONFIG_SOUND is not set +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +# CONFIG_HID_DEBUG is not set +# CONFIG_HIDRAW is not set + +# +# USB Input Devices +# +CONFIG_USB_HID=y +# CONFIG_USB_HIDINPUT_POWERBOOK is not set +# CONFIG_HID_FF is not set +# CONFIG_USB_HIDDEV is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARCH_HAS_EHCI=y +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set +# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set + +# +# Miscellaneous USB options +# +CONFIG_USB_DEVICEFS=y +CONFIG_USB_DEVICE_CLASS=y +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_OTG is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_C67X00_HCD is not set +CONFIG_USB_EHCI_HCD=m +# CONFIG_USB_EHCI_ROOT_HUB_TT is not set +# CONFIG_USB_EHCI_TT_NEWSCHED is not set +# CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set +CONFIG_USB_OHCI_HCD=m +# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +# CONFIG_USB_UHCI_HCD is not set +# CONFIG_USB_SL811_HCD is not set +CONFIG_USB_R8A66597_HCD=y + +# +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set +# CONFIG_USB_WDM is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# may also be needed; see USB_STORAGE Help for more information +# +CONFIG_USB_STORAGE=y +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_ISD200 is not set +# CONFIG_USB_STORAGE_DPCM is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_ONETOUCH is not set +# CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set +CONFIG_USB_MON=y + +# +# USB port drivers +# +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_PHIDGET is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_SISUSBVGA is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set +CONFIG_USB_TEST=m +# CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_GADGET is not set +# CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set +# CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set +# CONFIG_INFINIBAND is not set +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# I2C RTC drivers +# +# CONFIG_RTC_DRV_DS1307 is not set +# CONFIG_RTC_DRV_DS1374 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_MAX6900 is not set +CONFIG_RTC_DRV_RS5C372=y +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_X1205 is not set +# CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_PCF8583 is not set +# CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_S35390A is not set +# CONFIG_RTC_DRV_FM3130 is not set + +# +# SPI RTC drivers +# + +# +# Platform RTC drivers +# +# CONFIG_RTC_DRV_DS1511 is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# on-CPU RTC drivers +# +# CONFIG_RTC_DRV_SH is not set +# CONFIG_UIO is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +CONFIG_EXT3_FS_XATTR=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +# CONFIG_EXT3_FS_SECURITY is not set +# CONFIG_EXT4DEV_FS is not set +CONFIG_JBD=y +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +CONFIG_FS_POSIX_ACL=y +# CONFIG_XFS_FS is not set +# CONFIG_OCFS2_FS is not set +CONFIG_DNOTIFY=y +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +CONFIG_NTFS_FS=y +# CONFIG_NTFS_DEBUG is not set +CONFIG_NTFS_RW=y + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLBFS is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_JFFS2_FS is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +CONFIG_MINIX_FS=y +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +CONFIG_NFS_V4=y +CONFIG_NFSD=y +CONFIG_NFSD_V3=y +# CONFIG_NFSD_V3_ACL is not set +CONFIG_NFSD_V4=y +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_EXPORTFS=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +CONFIG_SUNRPC_GSS=y +# CONFIG_SUNRPC_BIND34 is not set +CONFIG_RPCSEC_GSS_KRB5=y +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +CONFIG_NLS_CODEPAGE_932=y +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +CONFIG_NLS_ISO8859_1=y +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set +# CONFIG_DLM is not set + +# +# Kernel hacking +# +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +# CONFIG_PRINTK_TIME is not set +# CONFIG_ENABLE_WARN_DEPRECATED is not set +# CONFIG_ENABLE_MUST_CHECK is not set +CONFIG_FRAME_WARN=1024 +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +CONFIG_SCHED_DEBUG=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set +# CONFIG_DEBUG_SLAB is not set +CONFIG_DEBUG_PREEMPT=y +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +# CONFIG_FRAME_POINTER is not set +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_SAMPLES is not set +# CONFIG_SH_STANDARD_BIOS is not set +# CONFIG_EARLY_SCIF_CONSOLE is not set +# CONFIG_DEBUG_BOOTMEM is not set +# CONFIG_DEBUG_STACKOVERFLOW is not set +# CONFIG_DEBUG_STACK_USAGE is not set +# CONFIG_4KSTACKS is not set +# CONFIG_IRQSTACKS is not set +# CONFIG_SH_KGDB is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_MANAGER=y +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +CONFIG_CRYPTO_HMAC=y +# CONFIG_CRYPTO_XCBC is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_MD4 is not set +CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_LZO is not set +# CONFIG_CRYPTO_HW is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/sh/drivers/pci/Makefile b/arch/sh/drivers/pci/Makefile index 0718805774e..847e90894d1 100644 --- a/arch/sh/drivers/pci/Makefile +++ b/arch/sh/drivers/pci/Makefile @@ -23,3 +23,4 @@ obj-$(CONFIG_SH_LANDISK) += ops-landisk.o obj-$(CONFIG_SH_LBOX_RE2) += ops-lboxre2.o fixups-lboxre2.o obj-$(CONFIG_SH_7780_SOLUTION_ENGINE) += ops-se7780.o fixups-se7780.o obj-$(CONFIG_SH_CAYMAN) += ops-cayman.o +obj-$(CONFIG_SH_SH7785LCR) += ops-sh7785lcr.o fixups-sh7785lcr.o diff --git a/arch/sh/drivers/pci/fixups-sh7785lcr.c b/arch/sh/drivers/pci/fixups-sh7785lcr.c new file mode 100644 index 00000000000..4949e601387 --- /dev/null +++ b/arch/sh/drivers/pci/fixups-sh7785lcr.c @@ -0,0 +1,46 @@ +/* + * arch/sh/drivers/pci/fixups-sh7785lcr.c + * + * R0P7785LC0011RL PCI fixups + * Copyright (C) 2008 Yoshihiro Shimoda + * + * Based on arch/sh/drivers/pci/fixups-r7780rp.c + * Copyright (C) 2003 Lineo uSolutions, Inc. + * Copyright (C) 2004 - 2006 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include +#include "pci-sh4.h" + +int pci_fixup_pcic(void) +{ + pci_write_reg(0x000043ff, SH4_PCIINTM); + pci_write_reg(0x0000380f, SH4_PCIAINTM); + + pci_write_reg(0xfbb00047, SH7780_PCICMD); + pci_write_reg(0x00000000, SH7780_PCIIBAR); + + pci_write_reg(0x00011912, SH7780_PCISVID); + pci_write_reg(0x08000000, SH7780_PCICSCR0); + pci_write_reg(0x0000001b, SH7780_PCICSAR0); + pci_write_reg(0xfd000000, SH7780_PCICSCR1); + pci_write_reg(0x0000000f, SH7780_PCICSAR1); + + pci_write_reg(0xfd000000, SH7780_PCIMBR0); + pci_write_reg(0x00fc0000, SH7780_PCIMBMR0); + +#ifdef CONFIG_32BIT + pci_write_reg(0xc0000000, SH7780_PCIMBR2); + pci_write_reg(0x20000000 - SH7780_PCI_IO_SIZE, SH7780_PCIMBMR2); +#endif + + /* Set IOBR for windows containing area specified in pci.h */ + pci_write_reg((PCIBIOS_MIN_IO & ~(SH7780_PCI_IO_SIZE - 1)), + SH7780_PCIIOBR); + pci_write_reg(((SH7780_PCI_IO_SIZE - 1) & (7 << 18)), SH7780_PCIIOBMR); + + return 0; +} diff --git a/arch/sh/drivers/pci/ops-sh7785lcr.c b/arch/sh/drivers/pci/ops-sh7785lcr.c new file mode 100644 index 00000000000..b3bd6870205 --- /dev/null +++ b/arch/sh/drivers/pci/ops-sh7785lcr.c @@ -0,0 +1,66 @@ +/* + * Author: Ian DaSilva (idasilva@mvista.com) + * + * Highly leveraged from pci-bigsur.c, written by Dustin McIntire. + * + * May be copied or modified under the terms of the GNU General Public + * License. See linux/COPYING for more information. + * + * PCI initialization for the Renesas R0P7785LC0011RL board + * Based on arch/sh/drivers/pci/ops-r7780rp.c + * + */ +#include +#include +#include +#include +#include +#include "pci-sh4.h" + +static char irq_tab[] __initdata = { + 65, 66, 67, 68, +}; + +int __init pcibios_map_platform_irq(struct pci_dev *pdev, u8 slot, u8 pin) +{ + return irq_tab[slot]; +} + +static struct resource sh7785_io_resource = { + .name = "SH7785_IO", + .start = SH7780_PCI_IO_BASE, + .end = SH7780_PCI_IO_BASE + SH7780_PCI_IO_SIZE - 1, + .flags = IORESOURCE_IO +}; + +static struct resource sh7785_mem_resource = { + .name = "SH7785_mem", + .start = SH7780_PCI_MEMORY_BASE, + .end = SH7780_PCI_MEMORY_BASE + SH7780_PCI_MEM_SIZE - 1, + .flags = IORESOURCE_MEM +}; + +struct pci_channel board_pci_channels[] = { + { &sh4_pci_ops, &sh7785_io_resource, &sh7785_mem_resource, 0, 0xff }, + { NULL, NULL, NULL, 0, 0 }, +}; +EXPORT_SYMBOL(board_pci_channels); + +static struct sh4_pci_address_map sh7785_pci_map = { + .window0 = { + .base = SH7780_CS2_BASE_ADDR, + .size = 0x04000000, + }, + + .window1 = { + .base = SH7780_CS3_BASE_ADDR, + .size = 0x04000000, + }, + + .flags = SH4_PCIC_NO_RESET, +}; + +int __init pcibios_init_platform(void) +{ + return sh7780_pcic_init(&sh7785_pci_map); +} diff --git a/arch/sh/tools/mach-types b/arch/sh/tools/mach-types index 4473723685c..0a11cc08f0a 100644 --- a/arch/sh/tools/mach-types +++ b/arch/sh/tools/mach-types @@ -49,3 +49,4 @@ MIGOR SH_MIGOR RSK7203 SH_RSK7203 AP325RXA SH_AP325RXA SH7763RDP SH_SH7763RDP +SH7785LCR SH_SH7785LCR diff --git a/include/asm-sh/sh7785lcr.h b/include/asm-sh/sh7785lcr.h new file mode 100644 index 00000000000..1ce27d5c749 --- /dev/null +++ b/include/asm-sh/sh7785lcr.h @@ -0,0 +1,55 @@ +#ifndef __ASM_SH_RENESAS_SH7785LCR_H +#define __ASM_SH_RENESAS_SH7785LCR_H + +/* + * This board has 2 physical memory maps. + * It can be changed with DIP switch(S2-5). + * + * phys address | S2-5 = OFF | S2-5 = ON + * -----------------------------+---------------+--------------- + * 0x00000000 - 0x03ffffff(CS0) | NOR Flash | NOR Flash + * 0x04000000 - 0x05ffffff(CS1) | PLD | PLD + * 0x06000000 - 0x07ffffff(CS1) | reserved | I2C + * 0x08000000 - 0x0bffffff(CS2) | USB | DDR SDRAM + * 0x0c000000 - 0x0fffffff(CS3) | SD | DDR SDRAM + * 0x10000000 - 0x13ffffff(CS4) | SM107 | SM107 + * 0x14000000 - 0x17ffffff(CS5) | I2C | USB + * 0x18000000 - 0x1bffffff(CS6) | reserved | SD + * 0x40000000 - 0x5fffffff | DDR SDRAM | (cannot use) + * + */ + +#define NOR_FLASH_ADDR 0x00000000 +#define NOR_FLASH_SIZE 0x04000000 + +#define PLD_BASE_ADDR 0x04000000 +#define PLD_PCICR (PLD_BASE_ADDR + 0x00) +#define PLD_LCD_BK_CONTR (PLD_BASE_ADDR + 0x02) +#define PLD_LOCALCR (PLD_BASE_ADDR + 0x04) +#define PLD_POFCR (PLD_BASE_ADDR + 0x06) +#define PLD_LEDCR (PLD_BASE_ADDR + 0x08) +#define PLD_SWSR (PLD_BASE_ADDR + 0x0a) +#define PLD_VERSR (PLD_BASE_ADDR + 0x0c) +#define PLD_MMSR (PLD_BASE_ADDR + 0x0e) + +#define SM107_MEM_ADDR 0x10000000 +#define SM107_MEM_SIZE 0x00e00000 +#define SM107_REG_ADDR 0x13e00000 +#define SM107_REG_SIZE 0x00200000 + +#if defined(CONFIG_SH_SH7785LCR_29BIT_PHYSMAPS) +#define R8A66597_ADDR 0x14000000 /* USB */ +#define CG200_ADDR 0x18000000 /* SD */ +#define PCA9564_ADDR 0x06000000 /* I2C */ +#else +#define R8A66597_ADDR 0x08000000 +#define CG200_ADDR 0x0c000000 +#define PCA9564_ADDR 0x14000000 +#endif + +#define R8A66597_SIZE 0x00000100 +#define CG200_SIZE 0x00010000 +#define PCA9564_SIZE 0x00000100 + +#endif /* __ASM_SH_RENESAS_SH7785LCR_H */ + -- cgit v1.2.3-70-g09d2 From 9ca6ecac505002d0c34b47b394f39aa14b0e6fb6 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Thu, 17 Jul 2008 19:13:34 +0900 Subject: sh: Use clk_always_enable() on sh7723 / ap325rxa Use clk_always_enable() on the sh7723 processor and in the ap325rxa board code. Remove duplicate MSTPCR register definitions. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt --- arch/sh/boards/renesas/ap325rxa/setup.c | 12 ------------ arch/sh/kernel/cpu/sh4a/setup-sh7723.c | 16 ++++++++++++++++ 2 files changed, 16 insertions(+), 12 deletions(-) (limited to 'arch/sh/boards') diff --git a/arch/sh/boards/renesas/ap325rxa/setup.c b/arch/sh/boards/renesas/ap325rxa/setup.c index f8d6d41893a..333b15cd795 100644 --- a/arch/sh/boards/renesas/ap325rxa/setup.c +++ b/arch/sh/boards/renesas/ap325rxa/setup.c @@ -97,20 +97,8 @@ static int __init ap325rxa_devices_setup(void) } device_initcall(ap325rxa_devices_setup); -#define MSTPCR0 (0xA4150030) -#define MSTPCR1 (0xA4150034) -#define MSTPCR2 (0xA4150038) - static void __init ap325rxa_setup(char **cmdline_p) { - /* enable VEU0 + VEU1 */ - ctrl_outl(ctrl_inl(MSTPCR2) & ~0x00000044, MSTPCR2); /* bit 2 + 6 */ - - /* enable MERAM */ - ctrl_outl(ctrl_inl(MSTPCR0) & ~0x00000001, MSTPCR0); /* bit 0 */ - - /* I2C */ - ctrl_outl(ctrl_inl(MSTPCR1) & ~0x00000200, MSTPCR1); } static struct sh_machine_vector mv_ap325rxa __initmv = { diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7723.c b/arch/sh/kernel/cpu/sh4a/setup-sh7723.c index cb5e6f822e6..cd6baffdc89 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7723.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7723.c @@ -13,6 +13,7 @@ #include #include #include +#include #include static struct uio_info vpu_platform_data = { @@ -230,9 +231,24 @@ static struct platform_device *sh7723_devices[] __initdata = { static int __init sh7723_devices_setup(void) { + clk_always_enable("mstp031"); /* TLB */ + clk_always_enable("mstp030"); /* IC */ + clk_always_enable("mstp029"); /* OC */ + clk_always_enable("mstp024"); /* FPU */ + clk_always_enable("mstp022"); /* INTC */ + clk_always_enable("mstp020"); /* SuperHyway */ + clk_always_enable("mstp000"); /* MERAM */ + clk_always_enable("mstp109"); /* I2C */ + clk_always_enable("mstp108"); /* RTC */ + clk_always_enable("mstp211"); /* USB */ + clk_always_enable("mstp206"); /* VEU2H1 */ + clk_always_enable("mstp202"); /* VEU2H0 */ + clk_always_enable("mstp201"); /* VPU */ + platform_resource_setup_memory(&vpu_device, "vpu", 2 << 20); platform_resource_setup_memory(&veu0_device, "veu0", 2 << 20); platform_resource_setup_memory(&veu1_device, "veu1", 2 << 20); + return platform_add_devices(sh7723_devices, ARRAY_SIZE(sh7723_devices)); } -- cgit v1.2.3-70-g09d2 From 6c7d826cf6ff05264f9af04410aee82a08edfb9f Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Thu, 17 Jul 2008 19:16:11 +0900 Subject: sh: Use clk_always_enable() on sh7722 / Migo-R / SE7722 Use clk_always_enable() on the sh7722 processor and in the board code for Migo-R and Solution Engine 7722. Remove duplicate MSTPCR register definitions. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt --- arch/sh/boards/renesas/migor/setup.c | 7 +++---- arch/sh/boards/se/7722/setup.c | 8 +++----- arch/sh/kernel/cpu/sh4a/setup-sh7722.c | 14 ++++++++++++++ include/asm-sh/migor.h | 4 ---- include/asm-sh/se7722.h | 4 ---- 5 files changed, 20 insertions(+), 17 deletions(-) (limited to 'arch/sh/boards') diff --git a/arch/sh/boards/renesas/migor/setup.c b/arch/sh/boards/renesas/migor/setup.c index 963c9932209..91819fb61b3 100644 --- a/arch/sh/boards/renesas/migor/setup.c +++ b/arch/sh/boards/renesas/migor/setup.c @@ -15,6 +15,7 @@ #include #include #include +#include #include #include #include @@ -217,6 +218,8 @@ static struct i2c_board_info __initdata migor_i2c_devices[] = { static int __init migor_devices_setup(void) { + clk_always_enable("mstp214"); /* KEYSC */ + i2c_register_board_info(0, migor_i2c_devices, ARRAY_SIZE(migor_i2c_devices)); @@ -235,16 +238,12 @@ static void __init migor_setup(char **cmdline_p) ctrl_outw(ctrl_inw(PORT_PSELA) & ~0x4100, PORT_PSELA); ctrl_outw(ctrl_inw(PORT_HIZCRA) & ~0x4000, PORT_HIZCRA); ctrl_outw(ctrl_inw(PORT_HIZCRC) & ~0xc000, PORT_HIZCRC); - ctrl_outl(ctrl_inl(MSTPCR2) & ~0x00004000, MSTPCR2); /* NAND Flash */ ctrl_outw(ctrl_inw(PORT_PXCR) & 0x0fff, PORT_PXCR); ctrl_outl((ctrl_inl(BSC_CS6ABCR) & ~0x00000600) | 0x00000200, BSC_CS6ABCR); - /* I2C */ - ctrl_outl(ctrl_inl(MSTPCR1) & ~0x00000200, MSTPCR1); - /* Touch Panel - Enable IRQ6 */ ctrl_outw(ctrl_inw(PORT_PZCR) & ~0xc, PORT_PZCR); ctrl_outw((ctrl_inw(PORT_PSELA) | 0x8000), PORT_PSELA); diff --git a/arch/sh/boards/se/7722/setup.c b/arch/sh/boards/se/7722/setup.c index ede3957fc14..6e228ea5978 100644 --- a/arch/sh/boards/se/7722/setup.c +++ b/arch/sh/boards/se/7722/setup.c @@ -16,6 +16,7 @@ #include #include #include +#include #include #include #include @@ -145,6 +146,8 @@ static struct platform_device *se7722_devices[] __initdata = { static int __init se7722_devices_setup(void) { + clk_always_enable("mstp214"); /* KEYSC */ + return platform_add_devices(se7722_devices, ARRAY_SIZE(se7722_devices)); } @@ -154,11 +157,6 @@ static void __init se7722_setup(char **cmdline_p) { ctrl_outw(0x010D, FPGA_OUT); /* FPGA */ - ctrl_outl(0x00051001, MSTPCR0); - ctrl_outl(0x00000000, MSTPCR1); - /* KEYSC, VOU, BEU, CEU, VEU, VPU, LCDC, USB */ - ctrl_outl(0xffffb7c0, MSTPCR2); - ctrl_outw(0x0000, PORT_PECR); /* PORT E 1 = IRQ5 ,E 0 = BS */ ctrl_outw(0x1000, PORT_PJCR); /* PORT J 1 = IRQ1,J 0 =IRQ0 */ diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7722.c b/arch/sh/kernel/cpu/sh4a/setup-sh7722.c index 6015f842eda..de1ede92176 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7722.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7722.c @@ -13,6 +13,7 @@ #include #include #include +#include #include static struct resource usbf_resources[] = { @@ -158,8 +159,21 @@ static struct platform_device *sh7722_devices[] __initdata = { static int __init sh7722_devices_setup(void) { + clk_always_enable("mstp031"); /* TLB */ + clk_always_enable("mstp030"); /* IC */ + clk_always_enable("mstp029"); /* OC */ + clk_always_enable("mstp028"); /* URAM */ + clk_always_enable("mstp026"); /* XYMEM */ + clk_always_enable("mstp022"); /* INTC */ + clk_always_enable("mstp020"); /* SuperHyway */ + clk_always_enable("mstp109"); /* I2C */ + clk_always_enable("mstp211"); /* USB */ + clk_always_enable("mstp202"); /* VEU */ + clk_always_enable("mstp201"); /* VPU */ + platform_resource_setup_memory(&vpu_device, "vpu", 1 << 20); platform_resource_setup_memory(&veu_device, "veu", 2 << 20); + return platform_add_devices(sh7722_devices, ARRAY_SIZE(sh7722_devices)); } diff --git a/include/asm-sh/migor.h b/include/asm-sh/migor.h index 2329363afdc..4c409a6dcfb 100644 --- a/include/asm-sh/migor.h +++ b/include/asm-sh/migor.h @@ -16,10 +16,6 @@ #include /* GPIO */ -#define MSTPCR0 0xa4150030 -#define MSTPCR1 0xa4150034 -#define MSTPCR2 0xa4150038 - #define PORT_PACR 0xa4050100 #define PORT_PDCR 0xa4050106 #define PORT_PECR 0xa4050108 diff --git a/include/asm-sh/se7722.h b/include/asm-sh/se7722.h index 3690fe5857a..e971d9a82f4 100644 --- a/include/asm-sh/se7722.h +++ b/include/asm-sh/se7722.h @@ -55,10 +55,6 @@ #define PA_LAN (PA_AREA6_IO + 0) /* SMC LAN91C111 */ /* GPIO */ -#define MSTPCR0 0xA4150030UL -#define MSTPCR1 0xA4150034UL -#define MSTPCR2 0xA4150038UL - #define FPGA_IN 0xb1840000UL #define FPGA_OUT 0xb1840004UL -- cgit v1.2.3-70-g09d2 From 8fa509ab915f668093c270151f884220232bfb25 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Thu, 17 Jul 2008 19:18:24 +0900 Subject: sh: Use clk_always_enable() on sh7343 / SE77343 Use clk_always_enable() on the sh7343 processor and in the board code for Solution Engine 7343. Remove duplicate MSTPCR register definitions. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt --- arch/sh/boards/se/7343/setup.c | 4 ---- arch/sh/kernel/cpu/sh4a/setup-sh7343.c | 15 +++++++++++++++ include/asm-sh/se7343.h | 4 ---- 3 files changed, 15 insertions(+), 8 deletions(-) (limited to 'arch/sh/boards') diff --git a/arch/sh/boards/se/7343/setup.c b/arch/sh/boards/se/7343/setup.c index 59d8d94a8c2..8ae718d6c71 100644 --- a/arch/sh/boards/se/7343/setup.c +++ b/arch/sh/boards/se/7343/setup.c @@ -114,10 +114,6 @@ static void __init sh7343se_setup(char **cmdline_p) { ctrl_outw(0xf900, FPGA_OUT); /* FPGA */ - ctrl_outl(0x00001001, MSTPCR0); - ctrl_outl(0x00000000, MSTPCR1); - ctrl_outl(0xffffbfC0, MSTPCR2); /* LCDC, BEU, CEU, VEU, KEYSC */ - ctrl_outw(0x0002, PORT_PECR); /* PORT E 1 = IRQ5 */ ctrl_outw(0x0020, PORT_PSELD); diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7343.c b/arch/sh/kernel/cpu/sh4a/setup-sh7343.c index 79ce34e19a2..78881b4214d 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7343.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7343.c @@ -12,6 +12,7 @@ #include #include #include +#include static struct resource iic0_resources[] = { [0] = { @@ -138,8 +139,22 @@ static struct platform_device *sh7343_devices[] __initdata = { static int __init sh7343_devices_setup(void) { + clk_always_enable("mstp031"); /* TLB */ + clk_always_enable("mstp030"); /* IC */ + clk_always_enable("mstp029"); /* OC */ + clk_always_enable("mstp028"); /* URAM */ + clk_always_enable("mstp026"); /* XYMEM */ + clk_always_enable("mstp023"); /* INTC3 */ + clk_always_enable("mstp022"); /* INTC */ + clk_always_enable("mstp020"); /* SuperHyway */ + clk_always_enable("mstp109"); /* I2C0 */ + clk_always_enable("mstp108"); /* I2C1 */ + clk_always_enable("mstp202"); /* VEU */ + clk_always_enable("mstp201"); /* VPU */ + platform_resource_setup_memory(&vpu_device, "vpu", 1 << 20); platform_resource_setup_memory(&veu_device, "veu", 2 << 20); + return platform_add_devices(sh7343_devices, ARRAY_SIZE(sh7343_devices)); } diff --git a/include/asm-sh/se7343.h b/include/asm-sh/se7343.h index 8d2af779fbc..98458460e63 100644 --- a/include/asm-sh/se7343.h +++ b/include/asm-sh/se7343.h @@ -115,10 +115,6 @@ #define PORT_PWDR 0xA4050166 #define PORT_PYDR 0xA4050168 -#define MSTPCR0 0xA4150030 -#define MSTPCR1 0xA4150034 -#define MSTPCR2 0xA4150038 - #define FPGA_IN 0xb1400000 #define FPGA_OUT 0xb1400002 -- cgit v1.2.3-70-g09d2 From 8b1285f1c192e7e84ba28cc25eb0e9bcf2dadb17 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Mon, 28 Jul 2008 18:47:30 +0900 Subject: sh: Add SuperH Mobile LCDC platform data for Migo-R Add WVGA and QVGA LCD panel support to Migo-R. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt --- arch/sh/Kconfig | 1 + arch/sh/boards/renesas/migor/Kconfig | 15 +++ arch/sh/boards/renesas/migor/Makefile | 1 + arch/sh/boards/renesas/migor/lcd_qvga.c | 165 ++++++++++++++++++++++++++++++++ arch/sh/boards/renesas/migor/setup.c | 96 +++++++++++++++++++ include/asm-sh/migor.h | 6 ++ 6 files changed, 284 insertions(+) create mode 100644 arch/sh/boards/renesas/migor/Kconfig create mode 100644 arch/sh/boards/renesas/migor/lcd_qvga.c (limited to 'arch/sh/boards') diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig index a90b73f72f3..7bfb0d219d6 100644 --- a/arch/sh/Kconfig +++ b/arch/sh/Kconfig @@ -592,6 +592,7 @@ endmenu source "arch/sh/boards/renesas/rts7751r2d/Kconfig" source "arch/sh/boards/renesas/r7780rp/Kconfig" source "arch/sh/boards/renesas/sdk7780/Kconfig" +source "arch/sh/boards/renesas/migor/Kconfig" source "arch/sh/boards/magicpanelr2/Kconfig" menu "Timer and clock configuration" diff --git a/arch/sh/boards/renesas/migor/Kconfig b/arch/sh/boards/renesas/migor/Kconfig new file mode 100644 index 00000000000..a7b3b728ec3 --- /dev/null +++ b/arch/sh/boards/renesas/migor/Kconfig @@ -0,0 +1,15 @@ +if SH_MIGOR + +choice + prompt "Migo-R LCD Panel Board Selection" + default SH_MIGOR_QVGA + +config SH_MIGOR_QVGA + bool "QVGA (320x240)" + +config SH_MIGOR_RTA_WVGA + bool "RTA WVGA (800x480)" + +endchoice + +endif diff --git a/arch/sh/boards/renesas/migor/Makefile b/arch/sh/boards/renesas/migor/Makefile index 77037567633..5f231dd25c0 100644 --- a/arch/sh/boards/renesas/migor/Makefile +++ b/arch/sh/boards/renesas/migor/Makefile @@ -1 +1,2 @@ obj-y := setup.o +obj-$(CONFIG_SH_MIGOR_QVGA) += lcd_qvga.o diff --git a/arch/sh/boards/renesas/migor/lcd_qvga.c b/arch/sh/boards/renesas/migor/lcd_qvga.c new file mode 100644 index 00000000000..6e960959644 --- /dev/null +++ b/arch/sh/boards/renesas/migor/lcd_qvga.c @@ -0,0 +1,165 @@ +/* + * Support for SuperH MigoR Quarter VGA LCD Panel + * + * Copyright (C) 2008 Magnus Damm + * + * Based on lcd_powertip.c from Kenati Technologies Pvt Ltd. + * Copyright (c) 2007 Ujjwal Pande , + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +/* LCD Module is a PH240320T according to board schematics. This module + * is made up of a 240x320 LCD hooked up to a R61505U (or HX8347-A01?) + * Driver IC. This IC is connected to the SH7722 built-in LCDC using a + * SYS-80 interface configured in 16 bit mode. + * + * Index 0: "Device Code Read" returns 0x1505. + */ + +static void reset_lcd_module(void) +{ + ctrl_outb(ctrl_inb(PORT_PHDR) & ~0x04, PORT_PHDR); + mdelay(2); + ctrl_outb(ctrl_inb(PORT_PHDR) | 0x04, PORT_PHDR); + mdelay(1); +} + +/* DB0-DB7 are connected to D1-D8, and DB8-DB15 to D10-D17 */ + +static unsigned long adjust_reg18(unsigned short data) +{ + unsigned long tmp1, tmp2; + + tmp1 = (data<<1 | 0x00000001) & 0x000001FF; + tmp2 = (data<<2 | 0x00000200) & 0x0003FE00; + return tmp1 | tmp2; +} + +static void write_reg(void *sys_ops_handle, + struct sh_mobile_lcdc_sys_bus_ops *sys_ops, + unsigned short reg, unsigned short data) +{ + sys_ops->write_index(sys_ops_handle, adjust_reg18(reg << 8 | data)); +} + +static void write_reg16(void *sys_ops_handle, + struct sh_mobile_lcdc_sys_bus_ops *sys_ops, + unsigned short reg, unsigned short data) +{ + sys_ops->write_index(sys_ops_handle, adjust_reg18(reg)); + sys_ops->write_data(sys_ops_handle, adjust_reg18(data)); +} + +static unsigned long read_reg16(void *sys_ops_handle, + struct sh_mobile_lcdc_sys_bus_ops *sys_ops, + unsigned short reg) +{ + unsigned long data; + + sys_ops->write_index(sys_ops_handle, adjust_reg18(reg)); + data = sys_ops->read_data(sys_ops_handle); + return ((data >> 1) & 0xff) | ((data >> 2) & 0xff00); +} + +static void migor_lcd_qvga_seq(void *sys_ops_handle, + struct sh_mobile_lcdc_sys_bus_ops *sys_ops, + unsigned short const *data, int no_data) +{ + int i; + + for (i = 0; i < no_data; i += 2) + write_reg16(sys_ops_handle, sys_ops, data[i], data[i + 1]); +} + +static const unsigned short sync_data[] = { + 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, +}; + +static const unsigned short magic0_data[] = { + 0x0060, 0x2700, 0x0008, 0x0808, 0x0090, 0x001A, 0x0007, 0x0001, + 0x0017, 0x0001, 0x0019, 0x0000, 0x0010, 0x17B0, 0x0011, 0x0116, + 0x0012, 0x0198, 0x0013, 0x1400, 0x0029, 0x000C, 0x0012, 0x01B8, +}; + +static const unsigned short magic1_data[] = { + 0x0030, 0x0307, 0x0031, 0x0303, 0x0032, 0x0603, 0x0033, 0x0202, + 0x0034, 0x0202, 0x0035, 0x0202, 0x0036, 0x1F1F, 0x0037, 0x0303, + 0x0038, 0x0303, 0x0039, 0x0603, 0x003A, 0x0202, 0x003B, 0x0102, + 0x003C, 0x0204, 0x003D, 0x0000, 0x0001, 0x0100, 0x0002, 0x0300, + 0x0003, 0x5028, 0x0020, 0x00ef, 0x0021, 0x0000, 0x0004, 0x0000, + 0x0009, 0x0000, 0x000A, 0x0008, 0x000C, 0x0000, 0x000D, 0x0000, + 0x0015, 0x8000, +}; + +static const unsigned short magic2_data[] = { + 0x0061, 0x0001, 0x0092, 0x0100, 0x0093, 0x0001, 0x0007, 0x0021, +}; + +static const unsigned short magic3_data[] = { + 0x0010, 0x16B0, 0x0011, 0x0111, 0x0007, 0x0061, +}; + +int migor_lcd_qvga_setup(void *board_data, void *sohandle, + struct sh_mobile_lcdc_sys_bus_ops *so) +{ + unsigned long xres = 320; + unsigned long yres = 240; + int k; + + reset_lcd_module(); + migor_lcd_qvga_seq(sohandle, so, sync_data, ARRAY_SIZE(sync_data)); + + if (read_reg16(sohandle, so, 0) != 0x1505) + return -ENODEV; + + pr_info("Migo-R QVGA LCD Module detected.\n"); + + migor_lcd_qvga_seq(sohandle, so, sync_data, ARRAY_SIZE(sync_data)); + write_reg16(sohandle, so, 0x00A4, 0x0001); + mdelay(10); + + migor_lcd_qvga_seq(sohandle, so, magic0_data, ARRAY_SIZE(magic0_data)); + mdelay(100); + + migor_lcd_qvga_seq(sohandle, so, magic1_data, ARRAY_SIZE(magic1_data)); + write_reg16(sohandle, so, 0x0050, 0xef - (yres - 1)); + write_reg16(sohandle, so, 0x0051, 0x00ef); + write_reg16(sohandle, so, 0x0052, 0x0000); + write_reg16(sohandle, so, 0x0053, xres - 1); + + migor_lcd_qvga_seq(sohandle, so, magic2_data, ARRAY_SIZE(magic2_data)); + mdelay(10); + + migor_lcd_qvga_seq(sohandle, so, magic3_data, ARRAY_SIZE(magic3_data)); + mdelay(40); + + /* clear GRAM to avoid displaying garbage */ + + write_reg16(sohandle, so, 0x0020, 0x0000); /* horiz addr */ + write_reg16(sohandle, so, 0x0021, 0x0000); /* vert addr */ + + for (k = 0; k < (xres * 256); k++) /* yes, 256 words per line */ + write_reg16(sohandle, so, 0x0022, 0x0000); + + write_reg16(sohandle, so, 0x0020, 0x0000); /* reset horiz addr */ + write_reg16(sohandle, so, 0x0021, 0x0000); /* reset vert addr */ + write_reg16(sohandle, so, 0x0007, 0x0173); + mdelay(40); + + /* enable display */ + write_reg(sohandle, so, 0x00, 0x22); + mdelay(100); + return 0; +} diff --git a/arch/sh/boards/renesas/migor/setup.c b/arch/sh/boards/renesas/migor/setup.c index 91819fb61b3..28f7ab489c4 100644 --- a/arch/sh/boards/renesas/migor/setup.c +++ b/arch/sh/boards/renesas/migor/setup.c @@ -19,6 +19,7 @@ #include #include #include +#include #include /* Address IRQ Size Bus Description @@ -199,9 +200,80 @@ static struct platform_device migor_nand_flash_device = { } }; +static struct sh_mobile_lcdc_info sh_mobile_lcdc_info = { +#ifdef CONFIG_SH_MIGOR_RTA_WVGA + .clock_source = LCDC_CLK_BUS, + .ch[0] = { + .chan = LCDC_CHAN_MAINLCD, + .bpp = 16, + .interface_type = RGB16, + .clock_divider = 2, + .lcd_cfg = { + .name = "LB070WV1", + .xres = 800, + .yres = 480, + .left_margin = 64, + .right_margin = 16, + .hsync_len = 120, + .upper_margin = 1, + .lower_margin = 17, + .vsync_len = 2, + .sync = 0, + }, + } +#endif +#ifdef CONFIG_SH_MIGOR_QVGA + .clock_source = LCDC_CLK_PERIPHERAL, + .ch[0] = { + .chan = LCDC_CHAN_MAINLCD, + .bpp = 16, + .interface_type = SYS16A, + .clock_divider = 10, + .lcd_cfg = { + .name = "PH240320T", + .xres = 320, + .yres = 240, + .left_margin = 0, + .right_margin = 16, + .hsync_len = 8, + .upper_margin = 1, + .lower_margin = 17, + .vsync_len = 2, + .sync = FB_SYNC_HOR_HIGH_ACT, + }, + .board_cfg = { + .setup_sys = migor_lcd_qvga_setup, + }, + .sys_bus_cfg = { + .ldmt2r = 0x06000a09, + .ldmt3r = 0x180e3418, + }, + } +#endif +}; + +static struct resource migor_lcdc_resources[] = { + [0] = { + .name = "LCDC", + .start = 0xfe940000, /* P4-only space */ + .end = 0xfe941fff, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device migor_lcdc_device = { + .name = "sh_mobile_lcdc_fb", + .num_resources = ARRAY_SIZE(migor_lcdc_resources), + .resource = migor_lcdc_resources, + .dev = { + .platform_data = &sh_mobile_lcdc_info, + }, +}; + static struct platform_device *migor_devices[] __initdata = { &smc91x_eth_device, &sh_keysc_device, + &migor_lcdc_device, &migor_nor_flash_device, &migor_nand_flash_device, }; @@ -219,6 +291,7 @@ static struct i2c_board_info __initdata migor_i2c_devices[] = { static int __init migor_devices_setup(void) { clk_always_enable("mstp214"); /* KEYSC */ + clk_always_enable("mstp200"); /* LCDC */ i2c_register_board_info(0, migor_i2c_devices, ARRAY_SIZE(migor_i2c_devices)); @@ -248,6 +321,29 @@ static void __init migor_setup(char **cmdline_p) ctrl_outw(ctrl_inw(PORT_PZCR) & ~0xc, PORT_PZCR); ctrl_outw((ctrl_inw(PORT_PSELA) | 0x8000), PORT_PSELA); ctrl_outw((ctrl_inw(PORT_HIZCRC) & ~0x4000), PORT_HIZCRC); + +#ifdef CONFIG_SH_MIGOR_RTA_WVGA + /* LCDC - WVGA - Enable RGB Interface signals */ + ctrl_outw(ctrl_inw(PORT_PACR) & ~0x0003, PORT_PACR); + ctrl_outw(0x0000, PORT_PHCR); + ctrl_outw(0x0000, PORT_PLCR); + ctrl_outw(0x0000, PORT_PMCR); + ctrl_outw(ctrl_inw(PORT_PRCR) & ~0x000f, PORT_PRCR); + ctrl_outw((ctrl_inw(PORT_PSELD) & ~0x000d) | 0x0400, PORT_PSELD); + ctrl_outw(ctrl_inw(PORT_MSELCRB) & ~0x0100, PORT_MSELCRB); + ctrl_outw(ctrl_inw(PORT_HIZCRA) & ~0x01e0, PORT_HIZCRA); +#endif +#ifdef CONFIG_SH_MIGOR_QVGA + /* LCDC - QVGA - Enable SYS Interface signals */ + ctrl_outw(ctrl_inw(PORT_PACR) & ~0x0003, PORT_PACR); + ctrl_outw((ctrl_inw(PORT_PHCR) & ~0xcfff) | 0x0010, PORT_PHCR); + ctrl_outw(0x0000, PORT_PLCR); + ctrl_outw(0x0000, PORT_PMCR); + ctrl_outw(ctrl_inw(PORT_PRCR) & ~0x030f, PORT_PRCR); + ctrl_outw((ctrl_inw(PORT_PSELD) & ~0x0001) | 0x0420, PORT_PSELD); + ctrl_outw(ctrl_inw(PORT_MSELCRB) | 0x0100, PORT_MSELCRB); + ctrl_outw(ctrl_inw(PORT_HIZCRA) & ~0x01e0, PORT_HIZCRA); +#endif } static struct sh_machine_vector mv_migor __initmv = { diff --git a/include/asm-sh/migor.h b/include/asm-sh/migor.h index 4c409a6dcfb..e9f8e9b15f4 100644 --- a/include/asm-sh/migor.h +++ b/include/asm-sh/migor.h @@ -30,6 +30,7 @@ #define PORT_PYCR 0xa405014a #define PORT_PZCR 0xa405014c #define PORT_PADR 0xa4050120 +#define PORT_PHDR 0xa405012e #define PORT_PWDR 0xa4050166 #define PORT_HIZCRA 0xa4050158 @@ -51,4 +52,9 @@ #define BSC_CS6ABCR 0xfec1001c +#include + +int migor_lcd_qvga_setup(void *board_data, void *sys_ops_handle, + struct sh_mobile_lcdc_sys_bus_ops *sys_ops); + #endif /* __ASM_SH_MIGOR_H */ -- cgit v1.2.3-70-g09d2 From 1765534c23596794385f309609c09642f33846e4 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Mon, 28 Jul 2008 18:51:01 +0900 Subject: sh: Add SuperH Mobile CEU platform data for Migo-R Add Migo-R specific platform data for on-chip sh7722 CEU and ov772x camera. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt --- arch/sh/boards/renesas/migor/setup.c | 173 ++++++++++++++++++++++++++++++++++- include/asm-sh/migor.h | 5 + 2 files changed, 177 insertions(+), 1 deletion(-) (limited to 'arch/sh/boards') diff --git a/arch/sh/boards/renesas/migor/setup.c b/arch/sh/boards/renesas/migor/setup.c index 28f7ab489c4..7bd365ad2d0 100644 --- a/arch/sh/boards/renesas/migor/setup.c +++ b/arch/sh/boards/renesas/migor/setup.c @@ -15,6 +15,10 @@ #include #include #include +#include +#include +#include +#include #include #include #include @@ -270,15 +274,167 @@ static struct platform_device migor_lcdc_device = { }, }; +static struct clk *camera_clk; + +static void camera_power_on(void) +{ + unsigned char value; + + camera_clk = clk_get(NULL, "video_clk"); + clk_set_rate(camera_clk, 24000000); + clk_enable(camera_clk); /* start VIO_CKO */ + + mdelay(10); + value = ctrl_inb(PORT_PTDR); + value &= ~0x09; +#ifndef CONFIG_SH_MIGOR_RTA_WVGA + value |= 0x01; +#endif + ctrl_outb(value, PORT_PTDR); + mdelay(10); + + ctrl_outb(value | 8, PORT_PTDR); +} + +static void camera_power_off(void) +{ + clk_disable(camera_clk); /* stop VIO_CKO */ + clk_put(camera_clk); + + ctrl_outb(ctrl_inb(PORT_PTDR) & ~0x08, PORT_PTDR); +} + +static unsigned char camera_ov772x_magic[] = +{ + 0x09, 0x01, 0x0c, 0x10, 0x0d, 0x41, 0x0e, 0x01, + 0x12, 0x00, 0x13, 0x8F, 0x14, 0x4A, 0x15, 0x00, + 0x16, 0x00, 0x17, 0x23, 0x18, 0xa0, 0x19, 0x07, + 0x1a, 0xf0, 0x1b, 0x40, 0x1f, 0x00, 0x20, 0x10, + 0x22, 0xff, 0x23, 0x01, 0x28, 0x00, 0x29, 0xa0, + 0x2a, 0x00, 0x2b, 0x00, 0x2c, 0xf0, 0x2d, 0x00, + 0x2e, 0x00, 0x30, 0x80, 0x31, 0x60, 0x32, 0x00, + 0x33, 0x00, 0x34, 0x00, 0x3d, 0x80, 0x3e, 0xe2, + 0x3f, 0x1f, 0x42, 0x80, 0x43, 0x80, 0x44, 0x80, + 0x45, 0x80, 0x46, 0x00, 0x47, 0x00, 0x48, 0x00, + 0x49, 0x50, 0x4a, 0x30, 0x4b, 0x50, 0x4c, 0x50, + 0x4d, 0x00, 0x4e, 0xef, 0x4f, 0x10, 0x50, 0x60, + 0x51, 0x00, 0x52, 0x00, 0x53, 0x24, 0x54, 0x7a, + 0x55, 0xfc, 0x62, 0xff, 0x63, 0xf0, 0x64, 0x1f, + 0x65, 0x00, 0x66, 0x10, 0x67, 0x00, 0x68, 0x00, + 0x69, 0x5c, 0x6a, 0x11, 0x6b, 0xa2, 0x6c, 0x01, + 0x6d, 0x50, 0x6e, 0x80, 0x6f, 0x80, 0x70, 0x0f, + 0x71, 0x00, 0x72, 0x00, 0x73, 0x0f, 0x74, 0x0f, + 0x75, 0xff, 0x78, 0x10, 0x79, 0x70, 0x7a, 0x70, + 0x7b, 0xf0, 0x7c, 0xf0, 0x7d, 0xf0, 0x7e, 0x0e, + 0x7f, 0x1a, 0x80, 0x31, 0x81, 0x5a, 0x82, 0x69, + 0x83, 0x75, 0x84, 0x7e, 0x85, 0x88, 0x86, 0x8f, + 0x87, 0x96, 0x88, 0xa3, 0x89, 0xaf, 0x8a, 0xc4, + 0x8b, 0xd7, 0x8c, 0xe8, 0x8d, 0x20, 0x8e, 0x00, + 0x8f, 0x00, 0x90, 0x08, 0x91, 0x10, 0x92, 0x1f, + 0x93, 0x01, 0x94, 0x2c, 0x95, 0x24, 0x96, 0x08, + 0x97, 0x14, 0x98, 0x24, 0x99, 0x38, 0x9a, 0x9e, + 0x9b, 0x00, 0x9c, 0x40, 0x9e, 0x11, 0x9f, 0x02, + 0xa0, 0x00, 0xa1, 0x40, 0xa2, 0x40, 0xa3, 0x06, + 0xa4, 0x00, 0xa6, 0x00, 0xa7, 0x40, 0xa8, 0x40, + 0xa9, 0x80, 0xaa, 0x80, 0xab, 0x06, 0xac, 0xff, + 0x12, 0x06, 0x64, 0x3f, 0x12, 0x46, 0x17, 0x3f, + 0x18, 0x50, 0x19, 0x03, 0x1a, 0x78, 0x29, 0x50, + 0x2c, 0x78, +}; + +static int ov772x_set_capture(struct soc_camera_platform_info *info, + int enable) +{ + struct i2c_adapter *a = i2c_get_adapter(0); + struct i2c_msg msg; + int ret = 0; + int i; + + if (!enable) + return 0; /* camera_power_off() is enough */ + + for (i = 0; i < ARRAY_SIZE(camera_ov772x_magic); i += 2) { + u_int8_t buf[8]; + + msg.addr = 0x21; + msg.buf = buf; + msg.len = 2; + msg.flags = 0; + + buf[0] = camera_ov772x_magic[i]; + buf[1] = camera_ov772x_magic[i + 1]; + + ret = (ret < 0) ? ret : i2c_transfer(a, &msg, 1); + } + + return ret; +} + +static struct soc_camera_platform_info ov772x_info = { + .iface = 0, + .format_name = "RGB565", + .format_depth = 16, + .format = { + .pixelformat = V4L2_PIX_FMT_RGB565, + .colorspace = V4L2_COLORSPACE_SRGB, + .width = 320, + .height = 240, + }, + .bus_param = SOCAM_PCLK_SAMPLE_RISING | SOCAM_HSYNC_ACTIVE_HIGH | + SOCAM_VSYNC_ACTIVE_HIGH | SOCAM_MASTER | SOCAM_DATAWIDTH_8, + .set_capture = ov772x_set_capture, +}; + +static struct platform_device migor_camera_device = { + .name = "soc_camera_platform", + .dev = { + .platform_data = &ov772x_info, + }, +}; + +static struct sh_mobile_ceu_info sh_mobile_ceu_info = { + .flags = SOCAM_MASTER | SOCAM_DATAWIDTH_8 | SOCAM_PCLK_SAMPLE_RISING \ + | SOCAM_HSYNC_ACTIVE_HIGH | SOCAM_VSYNC_ACTIVE_HIGH, + .enable_camera = camera_power_on, + .disable_camera = camera_power_off, +}; + +static struct resource migor_ceu_resources[] = { + [0] = { + .name = "CEU", + .start = 0xfe910000, + .end = 0xfe91009f, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 52, + .flags = IORESOURCE_IRQ, + }, + [2] = { + /* place holder for contiguous memory */ + }, +}; + +static struct platform_device migor_ceu_device = { + .name = "sh_mobile_ceu", + .num_resources = ARRAY_SIZE(migor_ceu_resources), + .resource = migor_ceu_resources, + .dev = { + .platform_data = &sh_mobile_ceu_info, + }, +}; + static struct platform_device *migor_devices[] __initdata = { &smc91x_eth_device, &sh_keysc_device, &migor_lcdc_device, + &migor_ceu_device, + &migor_camera_device, &migor_nor_flash_device, &migor_nand_flash_device, }; -static struct i2c_board_info __initdata migor_i2c_devices[] = { +static struct i2c_board_info migor_i2c_devices[] = { { I2C_BOARD_INFO("rs5c372b", 0x32), }, @@ -292,6 +448,9 @@ static int __init migor_devices_setup(void) { clk_always_enable("mstp214"); /* KEYSC */ clk_always_enable("mstp200"); /* LCDC */ + clk_always_enable("mstp203"); /* CEU */ + + platform_resource_setup_memory(&migor_ceu_device, "ceu", 4 << 20); i2c_register_board_info(0, migor_i2c_devices, ARRAY_SIZE(migor_i2c_devices)); @@ -344,6 +503,18 @@ static void __init migor_setup(char **cmdline_p) ctrl_outw(ctrl_inw(PORT_MSELCRB) | 0x0100, PORT_MSELCRB); ctrl_outw(ctrl_inw(PORT_HIZCRA) & ~0x01e0, PORT_HIZCRA); #endif + + /* CEU */ + ctrl_outw((ctrl_inw(PORT_PTCR) & ~0x03c3) | 0x0051, PORT_PTCR); + ctrl_outw(ctrl_inw(PORT_PUCR) & ~0x03ff, PORT_PUCR); + ctrl_outw(ctrl_inw(PORT_PVCR) & ~0x03ff, PORT_PVCR); + ctrl_outw(ctrl_inw(PORT_PWCR) & ~0x3c00, PORT_PWCR); + ctrl_outw(ctrl_inw(PORT_PSELC) | 0x0001, PORT_PSELC); + ctrl_outw(ctrl_inw(PORT_PSELD) & ~0x2000, PORT_PSELD); + ctrl_outw(ctrl_inw(PORT_PSELE) | 0x000f, PORT_PSELE); + ctrl_outw(ctrl_inw(PORT_MSELCRB) | 0x2200, PORT_MSELCRB); + ctrl_outw(ctrl_inw(PORT_HIZCRA) & ~0x0a00, PORT_HIZCRA); + ctrl_outw(ctrl_inw(PORT_HIZCRB) & ~0x0003, PORT_HIZCRB); } static struct sh_machine_vector mv_migor __initmv = { diff --git a/include/asm-sh/migor.h b/include/asm-sh/migor.h index e9f8e9b15f4..10016e0f4a4 100644 --- a/include/asm-sh/migor.h +++ b/include/asm-sh/migor.h @@ -25,12 +25,16 @@ #define PORT_PLCR 0xa4050114 #define PORT_PMCR 0xa4050116 #define PORT_PRCR 0xa405011c +#define PORT_PTCR 0xa4050140 +#define PORT_PUCR 0xa4050142 +#define PORT_PVCR 0xa4050144 #define PORT_PWCR 0xa4050146 #define PORT_PXCR 0xa4050148 #define PORT_PYCR 0xa405014a #define PORT_PZCR 0xa405014c #define PORT_PADR 0xa4050120 #define PORT_PHDR 0xa405012e +#define PORT_PTDR 0xa4050160 #define PORT_PWDR 0xa4050166 #define PORT_HIZCRA 0xa4050158 @@ -45,6 +49,7 @@ #define PORT_PSELB 0xa4050150 #define PORT_PSELC 0xa4050152 #define PORT_PSELD 0xa4050154 +#define PORT_PSELE 0xa4050156 #define PORT_HIZCRA 0xa4050158 #define PORT_HIZCRB 0xa405015a -- cgit v1.2.3-70-g09d2 From 6968980a1bc0ba56dd8ef21c14577af3f2f9992b Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Mon, 28 Jul 2008 19:07:04 +0900 Subject: sh: SuperH Mobile LCDC platform data for AP325RXA Add LCD panel platform data for the AP325RXA board. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt --- arch/sh/boards/renesas/ap325rxa/setup.c | 81 ++++++++++++++++++++++++++++++++- 1 file changed, 80 insertions(+), 1 deletion(-) (limited to 'arch/sh/boards') diff --git a/arch/sh/boards/renesas/ap325rxa/setup.c b/arch/sh/boards/renesas/ap325rxa/setup.c index 333b15cd795..db4e37d9c5b 100644 --- a/arch/sh/boards/renesas/ap325rxa/setup.c +++ b/arch/sh/boards/renesas/ap325rxa/setup.c @@ -16,7 +16,10 @@ #include #include #include +#include +#include #include +#include static struct resource smc9118_resources[] = { [0] = { @@ -79,9 +82,77 @@ static struct platform_device ap325rxa_nor_flash_device = { }, }; +#define FPGA_LCDREG 0xB4100180 +#define FPGA_BKLREG 0xB4100212 +#define FPGA_LCDREG_VAL 0x0018 +#define PORT_PHCR 0xA405010E +#define PORT_PLCR 0xA4050114 +#define PORT_PMCR 0xA4050116 +#define PORT_PRCR 0xA405011C +#define PORT_HIZCRA 0xA4050158 +#define PORT_PSCR 0xA405011E +#define PORT_PSDR 0xA405013E + +static void ap320_wvga_power_on(void *board_data) +{ + msleep(100); + + /* ASD AP-320/325 LCD ON */ + ctrl_outw(FPGA_LCDREG_VAL, FPGA_LCDREG); + + /* backlight */ + ctrl_outw((ctrl_inw(PORT_PSCR) & ~0x00C0) | 0x40, PORT_PSCR); + ctrl_outb(ctrl_inb(PORT_PSDR) & ~0x08, PORT_PSDR); + ctrl_outw(0x100, FPGA_BKLREG); +} + +static struct sh_mobile_lcdc_info lcdc_info = { + .clock_source = LCDC_CLK_EXTERNAL, + .ch[0] = { + .chan = LCDC_CHAN_MAINLCD, + .bpp = 16, + .interface_type = RGB18, + .clock_divider = 1, + .lcd_cfg = { + .name = "LB070WV1", + .xres = 800, + .yres = 480, + .left_margin = 40, + .right_margin = 160, + .hsync_len = 8, + .upper_margin = 63, + .lower_margin = 80, + .vsync_len = 1, + .sync = 0, /* hsync and vsync are active low */ + }, + .board_cfg = { + .display_on = ap320_wvga_power_on, + }, + } +}; + +static struct resource lcdc_resources[] = { + [0] = { + .name = "LCDC", + .start = 0xfe940000, /* P4-only space */ + .end = 0xfe941fff, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device lcdc_device = { + .name = "sh_mobile_lcdc_fb", + .num_resources = ARRAY_SIZE(lcdc_resources), + .resource = lcdc_resources, + .dev = { + .platform_data = &lcdc_info, + }, +}; + static struct platform_device *ap325rxa_devices[] __initdata = { &smc9118_device, - &ap325rxa_nor_flash_device + &ap325rxa_nor_flash_device, + &lcdc_device, }; static struct i2c_board_info __initdata ap325rxa_i2c_devices[] = { @@ -89,6 +160,8 @@ static struct i2c_board_info __initdata ap325rxa_i2c_devices[] = { static int __init ap325rxa_devices_setup(void) { + clk_always_enable("mstp200"); /* LCDC */ + i2c_register_board_info(0, ap325rxa_i2c_devices, ARRAY_SIZE(ap325rxa_i2c_devices)); @@ -99,6 +172,12 @@ device_initcall(ap325rxa_devices_setup); static void __init ap325rxa_setup(char **cmdline_p) { + /* LCDC configuration */ + ctrl_outw(ctrl_inw(PORT_PHCR) & ~0xffff, PORT_PHCR); + ctrl_outw(ctrl_inw(PORT_PLCR) & ~0xffff, PORT_PLCR); + ctrl_outw(ctrl_inw(PORT_PMCR) & ~0xffff, PORT_PMCR); + ctrl_outw(ctrl_inw(PORT_PRCR) & ~0x03ff, PORT_PRCR); + ctrl_outw(ctrl_inw(PORT_HIZCRA) & ~0x01C0, PORT_HIZCRA); } static struct sh_machine_vector mv_ap325rxa __initmv = { -- cgit v1.2.3-70-g09d2 From 4875ea224af0215635f18c2c1b060fb023c7602f Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Mon, 28 Jul 2008 19:11:07 +0900 Subject: sh: Update smc911x platform data for AP325RXA Pass board specific smc911x parameters using struct smc911x_platdata. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt --- arch/sh/boards/renesas/ap325rxa/setup.c | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'arch/sh/boards') diff --git a/arch/sh/boards/renesas/ap325rxa/setup.c b/arch/sh/boards/renesas/ap325rxa/setup.c index db4e37d9c5b..f8b7859bbdc 100644 --- a/arch/sh/boards/renesas/ap325rxa/setup.c +++ b/arch/sh/boards/renesas/ap325rxa/setup.c @@ -12,15 +12,22 @@ #include #include +#include #include #include #include #include #include +#include #include #include #include +static struct smc911x_platdata smc911x_info = { + .flags = SMC911X_USE_32BIT, + .irq_flags = IRQF_TRIGGER_LOW, +}; + static struct resource smc9118_resources[] = { [0] = { .start = 0xb6080000, @@ -39,6 +46,9 @@ static struct platform_device smc9118_device = { .id = -1, .num_resources = ARRAY_SIZE(smc9118_resources), .resource = smc9118_resources, + .dev = { + .platform_data = &smc911x_info, + }, }; static struct mtd_partition ap325rxa_nor_flash_partitions[] = { -- cgit v1.2.3-70-g09d2 From 8b2224dc6a5b46cfa1d54ab1fe82107351c66443 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Mon, 28 Jul 2008 19:14:35 +0900 Subject: sh: SuperH Mobile CEU and camera platform data for AP325RXA Add AP325RXA specific platform data for on-chip sh7723 CEU and ncm03j camera. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt --- arch/sh/boards/renesas/ap325rxa/setup.c | 119 +++++++++++++++++++++++++++++++- 1 file changed, 118 insertions(+), 1 deletion(-) (limited to 'arch/sh/boards') diff --git a/arch/sh/boards/renesas/ap325rxa/setup.c b/arch/sh/boards/renesas/ap325rxa/setup.c index f8b7859bbdc..7fa74462bd9 100644 --- a/arch/sh/boards/renesas/ap325rxa/setup.c +++ b/arch/sh/boards/renesas/ap325rxa/setup.c @@ -19,6 +19,8 @@ #include #include #include +#include +#include #include #include #include @@ -99,9 +101,13 @@ static struct platform_device ap325rxa_nor_flash_device = { #define PORT_PLCR 0xA4050114 #define PORT_PMCR 0xA4050116 #define PORT_PRCR 0xA405011C -#define PORT_HIZCRA 0xA4050158 #define PORT_PSCR 0xA405011E +#define PORT_PZCR 0xA405014C +#define PORT_HIZCRA 0xA4050158 +#define PORT_MSELCRB 0xA4050182 #define PORT_PSDR 0xA405013E +#define PORT_PZDR 0xA405016C +#define PORT_PSELD 0xA4050154 static void ap320_wvga_power_on(void *board_data) { @@ -159,10 +165,112 @@ static struct platform_device lcdc_device = { }, }; +static unsigned char camera_ncm03j_magic[] = +{ + 0x87, 0x00, 0x88, 0x08, 0x89, 0x01, 0x8A, 0xE8, + 0x1D, 0x00, 0x1E, 0x8A, 0x21, 0x00, 0x33, 0x36, + 0x36, 0x60, 0x37, 0x08, 0x3B, 0x31, 0x44, 0x0F, + 0x46, 0xF0, 0x4B, 0x28, 0x4C, 0x21, 0x4D, 0x55, + 0x4E, 0x1B, 0x4F, 0xC7, 0x50, 0xFC, 0x51, 0x12, + 0x58, 0x02, 0x66, 0xC0, 0x67, 0x46, 0x6B, 0xA0, + 0x6C, 0x34, 0x7E, 0x25, 0x7F, 0x25, 0x8D, 0x0F, + 0x92, 0x40, 0x93, 0x04, 0x94, 0x26, 0x95, 0x0A, + 0x99, 0x03, 0x9A, 0xF0, 0x9B, 0x14, 0x9D, 0x7A, + 0xC5, 0x02, 0xD6, 0x07, 0x59, 0x00, 0x5A, 0x1A, + 0x5B, 0x2A, 0x5C, 0x37, 0x5D, 0x42, 0x5E, 0x56, + 0xC8, 0x00, 0xC9, 0x1A, 0xCA, 0x2A, 0xCB, 0x37, + 0xCC, 0x42, 0xCD, 0x56, 0xCE, 0x00, 0xCF, 0x1A, + 0xD0, 0x2A, 0xD1, 0x37, 0xD2, 0x42, 0xD3, 0x56, + 0x5F, 0x68, 0x60, 0x87, 0x61, 0xA3, 0x62, 0xBC, + 0x63, 0xD4, 0x64, 0xEA, 0xD6, 0x0F, +}; + +static int camera_set_capture(struct soc_camera_platform_info *info, + int enable) +{ + struct i2c_adapter *a = i2c_get_adapter(0); + struct i2c_msg msg; + int ret = 0; + int i; + + if (!enable) + return 0; /* no disable for now */ + + for (i = 0; i < ARRAY_SIZE(camera_ncm03j_magic); i += 2) { + u_int8_t buf[8]; + + msg.addr = 0x6e; + msg.buf = buf; + msg.len = 2; + msg.flags = 0; + + buf[0] = camera_ncm03j_magic[i]; + buf[1] = camera_ncm03j_magic[i + 1]; + + ret = (ret < 0) ? ret : i2c_transfer(a, &msg, 1); + } + + return ret; +} + +static struct soc_camera_platform_info camera_info = { + .iface = 0, + .format_name = "UYVY", + .format_depth = 16, + .format = { + .pixelformat = V4L2_PIX_FMT_UYVY, + .colorspace = V4L2_COLORSPACE_SMPTE170M, + .width = 640, + .height = 480, + }, + .bus_param = SOCAM_PCLK_SAMPLE_RISING | SOCAM_HSYNC_ACTIVE_HIGH | + SOCAM_VSYNC_ACTIVE_HIGH | SOCAM_MASTER | SOCAM_DATAWIDTH_8, + .set_capture = camera_set_capture, +}; + +static struct platform_device camera_device = { + .name = "soc_camera_platform", + .dev = { + .platform_data = &camera_info, + }, +}; + +static struct sh_mobile_ceu_info sh_mobile_ceu_info = { + .flags = SOCAM_PCLK_SAMPLE_RISING | SOCAM_HSYNC_ACTIVE_HIGH | + SOCAM_VSYNC_ACTIVE_HIGH | SOCAM_MASTER | SOCAM_DATAWIDTH_8, +}; + +static struct resource ceu_resources[] = { + [0] = { + .name = "CEU", + .start = 0xfe910000, + .end = 0xfe91009f, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 52, + .flags = IORESOURCE_IRQ, + }, + [2] = { + /* place holder for contiguous memory */ + }, +}; + +static struct platform_device ceu_device = { + .name = "sh_mobile_ceu", + .num_resources = ARRAY_SIZE(ceu_resources), + .resource = ceu_resources, + .dev = { + .platform_data = &sh_mobile_ceu_info, + }, +}; + static struct platform_device *ap325rxa_devices[] __initdata = { &smc9118_device, &ap325rxa_nor_flash_device, &lcdc_device, + &ceu_device, + &camera_device, }; static struct i2c_board_info __initdata ap325rxa_i2c_devices[] = { @@ -171,6 +279,9 @@ static struct i2c_board_info __initdata ap325rxa_i2c_devices[] = { static int __init ap325rxa_devices_setup(void) { clk_always_enable("mstp200"); /* LCDC */ + clk_always_enable("mstp203"); /* CEU */ + + platform_resource_setup_memory(&ceu_device, "ceu", 4 << 20); i2c_register_board_info(0, ap325rxa_i2c_devices, ARRAY_SIZE(ap325rxa_i2c_devices)); @@ -188,6 +299,12 @@ static void __init ap325rxa_setup(char **cmdline_p) ctrl_outw(ctrl_inw(PORT_PMCR) & ~0xffff, PORT_PMCR); ctrl_outw(ctrl_inw(PORT_PRCR) & ~0x03ff, PORT_PRCR); ctrl_outw(ctrl_inw(PORT_HIZCRA) & ~0x01C0, PORT_HIZCRA); + + /* CEU */ + ctrl_outw(ctrl_inw(PORT_MSELCRB) & ~0x0001, PORT_MSELCRB); + ctrl_outw(ctrl_inw(PORT_PSELD) & ~0x0003, PORT_PSELD); + ctrl_outw((ctrl_inw(PORT_PZCR) & ~0xff00) | 0x5500, PORT_PZCR); + ctrl_outb((ctrl_inb(PORT_PZDR) & ~0xf0) | 0x20, PORT_PZDR); } static struct sh_machine_vector mv_ap325rxa __initmv = { -- cgit v1.2.3-70-g09d2 From 6d0b365731682857ecc754163e7c5cb9edaae846 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Mon, 28 Jul 2008 22:31:02 +0900 Subject: sh: rsk7203: Add smc911x platform data. This hooks up platform data for the SMC9118 on the RSK+7203. Signed-off-by: Paul Mundt --- arch/sh/boards/renesas/rsk7203/setup.c | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'arch/sh/boards') diff --git a/arch/sh/boards/renesas/rsk7203/setup.c b/arch/sh/boards/renesas/rsk7203/setup.c index 0bbda04b03b..ffbedc59a97 100644 --- a/arch/sh/boards/renesas/rsk7203/setup.c +++ b/arch/sh/boards/renesas/rsk7203/setup.c @@ -10,13 +10,20 @@ #include #include #include +#include #include #include #include #include +#include #include #include +static struct smc911x_platdata smc911x_info = { + .flags = SMC911X_USE_16BIT, + .irq_flags = IRQF_TRIGGER_LOW, +}; + static struct resource smc911x_resources[] = { [0] = { .start = 0x24000000, @@ -35,6 +42,9 @@ static struct platform_device smc911x_device = { .id = -1, .num_resources = ARRAY_SIZE(smc911x_resources), .resource = smc911x_resources, + .dev = { + .platform_data = &smc911x_info, + }, }; static const char *probes[] = { "cmdlinepart", NULL }; -- cgit v1.2.3-70-g09d2 From f15cbe6f1a4b4d9df59142fc8e4abb973302cf44 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Tue, 29 Jul 2008 08:09:44 +0900 Subject: sh: migrate to arch/sh/include/ This follows the sparc changes a439fe51a1f8eb087c22dd24d69cebae4a3addac. Most of the moving about was done with Sam's directions at: http://marc.info/?l=linux-sh&m=121724823706062&w=2 with subsequent hacking and fixups entirely my fault. Signed-off-by: Sam Ravnborg Signed-off-by: Paul Mundt --- arch/sh/Makefile | 61 +-- arch/sh/boards/cayman/irq.c | 2 +- arch/sh/boards/cayman/setup.c | 2 +- arch/sh/boards/dreamcast/irq.c | 2 +- arch/sh/boards/dreamcast/setup.c | 4 +- arch/sh/boards/hp6xx/pm.c | 2 +- arch/sh/boards/hp6xx/pm_wakeup.S | 2 +- arch/sh/boards/hp6xx/setup.c | 2 +- arch/sh/boards/landisk/gio.c | 4 +- arch/sh/boards/landisk/irq.c | 2 +- arch/sh/boards/landisk/psw.c | 2 +- arch/sh/boards/landisk/setup.c | 2 +- arch/sh/boards/renesas/r7780rp/psw.c | 2 +- arch/sh/boards/se/7343/io.c | 2 +- arch/sh/boards/se/7343/setup.c | 4 +- arch/sh/boards/sh03/setup.c | 4 +- arch/sh/boards/snapgear/setup.c | 2 +- arch/sh/boot/compressed/head_64.S | 4 +- arch/sh/drivers/dma/dma-g2.c | 4 +- arch/sh/drivers/dma/dma-pvr2.c | 4 +- arch/sh/drivers/dma/dma-sh.c | 2 +- arch/sh/drivers/dma/dma-sh.h | 2 +- arch/sh/drivers/pci/fixups-dreamcast.c | 2 +- arch/sh/drivers/pci/ops-cayman.c | 2 +- arch/sh/drivers/pci/ops-dreamcast.c | 2 +- arch/sh/drivers/pci/pci-sh5.c | 2 +- arch/sh/include/asm/.gitignore | 1 + arch/sh/include/asm/Kbuild | 8 + arch/sh/include/asm/a.out.h | 20 + arch/sh/include/asm/adc.h | 13 + arch/sh/include/asm/addrspace.h | 53 +++ arch/sh/include/asm/atomic-grb.h | 169 ++++++++ arch/sh/include/asm/atomic-irq.h | 71 +++ arch/sh/include/asm/atomic-llsc.h | 107 +++++ arch/sh/include/asm/atomic.h | 89 ++++ arch/sh/include/asm/auxvec.h | 36 ++ arch/sh/include/asm/bitops-grb.h | 169 ++++++++ arch/sh/include/asm/bitops-irq.h | 91 ++++ arch/sh/include/asm/bitops.h | 103 +++++ arch/sh/include/asm/bug.h | 79 ++++ arch/sh/include/asm/bugs.h | 73 ++++ arch/sh/include/asm/byteorder.h | 70 +++ arch/sh/include/asm/cache.h | 51 +++ arch/sh/include/asm/cacheflush.h | 81 ++++ arch/sh/include/asm/checksum.h | 5 + arch/sh/include/asm/checksum_32.h | 215 +++++++++ arch/sh/include/asm/checksum_64.h | 78 ++++ arch/sh/include/asm/clock.h | 97 +++++ arch/sh/include/asm/cmpxchg-grb.h | 70 +++ arch/sh/include/asm/cmpxchg-irq.h | 40 ++ arch/sh/include/asm/cpu-features.h | 25 ++ arch/sh/include/asm/cputime.h | 6 + arch/sh/include/asm/current.h | 20 + arch/sh/include/asm/delay.h | 26 ++ arch/sh/include/asm/device.h | 12 + arch/sh/include/asm/div64.h | 1 + arch/sh/include/asm/dma-mapping.h | 192 +++++++++ arch/sh/include/asm/dma.h | 166 +++++++ arch/sh/include/asm/dmabrg.h | 23 + arch/sh/include/asm/edosk7705.h | 30 ++ arch/sh/include/asm/elf.h | 244 +++++++++++ arch/sh/include/asm/emergency-restart.h | 6 + arch/sh/include/asm/entry-macros.S | 33 ++ arch/sh/include/asm/errno.h | 6 + arch/sh/include/asm/fb.h | 19 + arch/sh/include/asm/fcntl.h | 1 + arch/sh/include/asm/fixmap.h | 117 +++++ arch/sh/include/asm/flat.h | 24 ++ arch/sh/include/asm/fpu.h | 55 +++ arch/sh/include/asm/freq.h | 18 + arch/sh/include/asm/futex-irq.h | 111 +++++ arch/sh/include/asm/futex.h | 77 ++++ arch/sh/include/asm/gpio.h | 19 + arch/sh/include/asm/hardirq.h | 16 + arch/sh/include/asm/hd64461.h | 250 +++++++++++ arch/sh/include/asm/hd64465/gpio.h | 46 ++ arch/sh/include/asm/hd64465/hd64465.h | 256 +++++++++++ arch/sh/include/asm/hd64465/io.h | 44 ++ arch/sh/include/asm/heartbeat.h | 17 + arch/sh/include/asm/hp6xx.h | 58 +++ arch/sh/include/asm/hugetlb.h | 92 ++++ arch/sh/include/asm/hw_irq.h | 123 ++++++ arch/sh/include/asm/i2c-sh7760.h | 22 + arch/sh/include/asm/ilsel.h | 45 ++ arch/sh/include/asm/io.h | 366 ++++++++++++++++ arch/sh/include/asm/io_generic.h | 49 +++ arch/sh/include/asm/io_trapped.h | 58 +++ arch/sh/include/asm/ioctl.h | 1 + arch/sh/include/asm/ioctls.h | 103 +++++ arch/sh/include/asm/ipcbuf.h | 29 ++ arch/sh/include/asm/irq.h | 57 +++ arch/sh/include/asm/irq_regs.h | 1 + arch/sh/include/asm/irqflags.h | 34 ++ arch/sh/include/asm/irqflags_32.h | 99 +++++ arch/sh/include/asm/irqflags_64.h | 85 ++++ arch/sh/include/asm/kdebug.h | 9 + arch/sh/include/asm/kexec.h | 62 +++ arch/sh/include/asm/kgdb.h | 69 +++ arch/sh/include/asm/kmap_types.h | 32 ++ arch/sh/include/asm/lboxre2.h | 27 ++ arch/sh/include/asm/linkage.h | 7 + arch/sh/include/asm/local.h | 7 + arch/sh/include/asm/machvec.h | 70 +++ arch/sh/include/asm/magicpanelr2.h | 67 +++ arch/sh/include/asm/mc146818rtc.h | 7 + arch/sh/include/asm/microdev.h | 80 ++++ arch/sh/include/asm/migor.h | 65 +++ arch/sh/include/asm/mman.h | 17 + arch/sh/include/asm/mmu.h | 76 ++++ arch/sh/include/asm/mmu_context.h | 185 ++++++++ arch/sh/include/asm/mmu_context_32.h | 47 ++ arch/sh/include/asm/mmu_context_64.h | 78 ++++ arch/sh/include/asm/mmzone.h | 48 +++ arch/sh/include/asm/module.h | 44 ++ arch/sh/include/asm/msgbuf.h | 31 ++ arch/sh/include/asm/mutex.h | 9 + arch/sh/include/asm/page.h | 183 ++++++++ arch/sh/include/asm/param.h | 22 + arch/sh/include/asm/parport.h | 16 + arch/sh/include/asm/pci.h | 144 +++++++ arch/sh/include/asm/percpu.h | 6 + arch/sh/include/asm/pgalloc.h | 96 +++++ arch/sh/include/asm/pgtable.h | 152 +++++++ arch/sh/include/asm/pgtable_32.h | 479 +++++++++++++++++++++ arch/sh/include/asm/pgtable_64.h | 314 ++++++++++++++ arch/sh/include/asm/pm.h | 17 + arch/sh/include/asm/poll.h | 1 + arch/sh/include/asm/posix_types.h | 13 + arch/sh/include/asm/posix_types_32.h | 122 ++++++ arch/sh/include/asm/posix_types_64.h | 131 ++++++ arch/sh/include/asm/processor.h | 66 +++ arch/sh/include/asm/processor_32.h | 216 ++++++++++ arch/sh/include/asm/processor_64.h | 275 ++++++++++++ arch/sh/include/asm/ptrace.h | 130 ++++++ arch/sh/include/asm/push-switch.h | 31 ++ arch/sh/include/asm/r7780rp.h | 198 +++++++++ arch/sh/include/asm/resource.h | 6 + arch/sh/include/asm/rtc.h | 16 + arch/sh/include/asm/rts7751r2d.h | 70 +++ arch/sh/include/asm/rwsem.h | 188 ++++++++ arch/sh/include/asm/scatterlist.h | 27 ++ arch/sh/include/asm/sdk7780.h | 81 ++++ arch/sh/include/asm/se.h | 99 +++++ arch/sh/include/asm/se7206.h | 13 + arch/sh/include/asm/se7343.h | 149 +++++++ arch/sh/include/asm/se7721.h | 70 +++ arch/sh/include/asm/se7722.h | 112 +++++ arch/sh/include/asm/se7751.h | 73 ++++ arch/sh/include/asm/se7780.h | 108 +++++ arch/sh/include/asm/sections.h | 11 + arch/sh/include/asm/segment.h | 34 ++ arch/sh/include/asm/sembuf.h | 25 ++ arch/sh/include/asm/serial.h | 36 ++ arch/sh/include/asm/setup.h | 27 ++ arch/sh/include/asm/sfp-machine.h | 84 ++++ arch/sh/include/asm/sh7760fb.h | 197 +++++++++ arch/sh/include/asm/sh7763rdp.h | 54 +++ arch/sh/include/asm/sh7785lcr.h | 55 +++ arch/sh/include/asm/sh_bios.h | 19 + arch/sh/include/asm/sh_keysc.h | 13 + arch/sh/include/asm/sh_mobile_lcdc.h | 66 +++ arch/sh/include/asm/shmbuf.h | 42 ++ arch/sh/include/asm/shmin.h | 9 + arch/sh/include/asm/shmparam.h | 22 + arch/sh/include/asm/sigcontext.h | 40 ++ arch/sh/include/asm/siginfo.h | 6 + arch/sh/include/asm/signal.h | 160 +++++++ arch/sh/include/asm/smc37c93x.h | 190 ++++++++ arch/sh/include/asm/smp.h | 50 +++ arch/sh/include/asm/snapgear.h | 71 +++ arch/sh/include/asm/socket.h | 57 +++ arch/sh/include/asm/sockios.h | 14 + arch/sh/include/asm/sparsemem.h | 16 + arch/sh/include/asm/spi.h | 13 + arch/sh/include/asm/spinlock.h | 223 ++++++++++ arch/sh/include/asm/spinlock_types.h | 21 + arch/sh/include/asm/stat.h | 138 ++++++ arch/sh/include/asm/statfs.h | 6 + arch/sh/include/asm/string.h | 5 + arch/sh/include/asm/string_32.h | 131 ++++++ arch/sh/include/asm/string_64.h | 17 + arch/sh/include/asm/system.h | 190 ++++++++ arch/sh/include/asm/system_32.h | 102 +++++ arch/sh/include/asm/system_64.h | 40 ++ arch/sh/include/asm/systemh7751.h | 71 +++ arch/sh/include/asm/termbits.h | 198 +++++++++ arch/sh/include/asm/termios.h | 90 ++++ arch/sh/include/asm/thread_info.h | 141 ++++++ arch/sh/include/asm/timer.h | 44 ++ arch/sh/include/asm/timex.h | 18 + arch/sh/include/asm/titan.h | 17 + arch/sh/include/asm/tlb.h | 27 ++ arch/sh/include/asm/tlb_64.h | 77 ++++ arch/sh/include/asm/tlbflush.h | 49 +++ arch/sh/include/asm/topology.h | 47 ++ arch/sh/include/asm/types.h | 35 ++ arch/sh/include/asm/uaccess.h | 256 +++++++++++ arch/sh/include/asm/uaccess_32.h | 249 +++++++++++ arch/sh/include/asm/uaccess_64.h | 79 ++++ arch/sh/include/asm/ubc.h | 64 +++ arch/sh/include/asm/ucontext.h | 12 + arch/sh/include/asm/unaligned.h | 19 + arch/sh/include/asm/unistd.h | 13 + arch/sh/include/asm/unistd_32.h | 384 +++++++++++++++++ arch/sh/include/asm/unistd_64.h | 423 ++++++++++++++++++ arch/sh/include/asm/user.h | 67 +++ arch/sh/include/asm/vga.h | 6 + arch/sh/include/asm/watchdog.h | 107 +++++ arch/sh/include/asm/xor.h | 1 + arch/sh/include/cpu-sh2/cpu/addrspace.h | 19 + arch/sh/include/cpu-sh2/cpu/cache.h | 41 ++ arch/sh/include/cpu-sh2/cpu/cacheflush.h | 44 ++ arch/sh/include/cpu-sh2/cpu/dma.h | 23 + arch/sh/include/cpu-sh2/cpu/freq.h | 18 + arch/sh/include/cpu-sh2/cpu/mmu_context.h | 16 + arch/sh/include/cpu-sh2/cpu/rtc.h | 8 + arch/sh/include/cpu-sh2/cpu/sigcontext.h | 17 + arch/sh/include/cpu-sh2/cpu/timer.h | 6 + arch/sh/include/cpu-sh2/cpu/ubc.h | 32 ++ arch/sh/include/cpu-sh2/cpu/watchdog.h | 69 +++ arch/sh/include/cpu-sh2a/cpu/addrspace.h | 10 + arch/sh/include/cpu-sh2a/cpu/cache.h | 40 ++ arch/sh/include/cpu-sh2a/cpu/cacheflush.h | 44 ++ arch/sh/include/cpu-sh2a/cpu/dma.h | 23 + arch/sh/include/cpu-sh2a/cpu/freq.h | 16 + arch/sh/include/cpu-sh2a/cpu/mmu_context.h | 16 + arch/sh/include/cpu-sh2a/cpu/rtc.h | 8 + arch/sh/include/cpu-sh2a/cpu/timer.h | 6 + arch/sh/include/cpu-sh2a/cpu/ubc.h | 32 ++ arch/sh/include/cpu-sh2a/cpu/watchdog.h | 69 +++ arch/sh/include/cpu-sh3/cpu/adc.h | 28 ++ arch/sh/include/cpu-sh3/cpu/addrspace.h | 19 + arch/sh/include/cpu-sh3/cpu/cache.h | 43 ++ arch/sh/include/cpu-sh3/cpu/cacheflush.h | 70 +++ arch/sh/include/cpu-sh3/cpu/dac.h | 41 ++ arch/sh/include/cpu-sh3/cpu/dma.h | 51 +++ arch/sh/include/cpu-sh3/cpu/freq.h | 27 ++ arch/sh/include/cpu-sh3/cpu/gpio.h | 67 +++ arch/sh/include/cpu-sh3/cpu/mmu_context.h | 44 ++ arch/sh/include/cpu-sh3/cpu/rtc.h | 8 + arch/sh/include/cpu-sh3/cpu/sigcontext.h | 17 + arch/sh/include/cpu-sh3/cpu/timer.h | 67 +++ arch/sh/include/cpu-sh3/cpu/ubc.h | 42 ++ arch/sh/include/cpu-sh3/cpu/watchdog.h | 25 ++ arch/sh/include/cpu-sh4/cpu/addrspace.h | 35 ++ arch/sh/include/cpu-sh4/cpu/cache.h | 42 ++ arch/sh/include/cpu-sh4/cpu/cacheflush.h | 43 ++ arch/sh/include/cpu-sh4/cpu/dma-sh7780.h | 39 ++ arch/sh/include/cpu-sh4/cpu/dma.h | 65 +++ arch/sh/include/cpu-sh4/cpu/fpu.h | 32 ++ arch/sh/include/cpu-sh4/cpu/freq.h | 44 ++ arch/sh/include/cpu-sh4/cpu/mmu_context.h | 63 +++ arch/sh/include/cpu-sh4/cpu/rtc.h | 13 + arch/sh/include/cpu-sh4/cpu/sigcontext.h | 24 ++ arch/sh/include/cpu-sh4/cpu/sq.h | 35 ++ arch/sh/include/cpu-sh4/cpu/timer.h | 60 +++ arch/sh/include/cpu-sh4/cpu/ubc.h | 64 +++ arch/sh/include/cpu-sh4/cpu/watchdog.h | 25 ++ arch/sh/include/cpu-sh5/cpu/addrspace.h | 11 + arch/sh/include/cpu-sh5/cpu/cache.h | 97 +++++ arch/sh/include/cpu-sh5/cpu/cacheflush.h | 33 ++ arch/sh/include/cpu-sh5/cpu/dma.h | 6 + arch/sh/include/cpu-sh5/cpu/irq.h | 117 +++++ arch/sh/include/cpu-sh5/cpu/mmu_context.h | 21 + arch/sh/include/cpu-sh5/cpu/registers.h | 106 +++++ arch/sh/include/cpu-sh5/cpu/rtc.h | 8 + arch/sh/include/cpu-sh5/cpu/timer.h | 4 + arch/sh/include/mach-dreamcast/mach/dma.h | 34 ++ arch/sh/include/mach-dreamcast/mach/maple.h | 37 ++ arch/sh/include/mach-dreamcast/mach/pci.h | 25 ++ arch/sh/include/mach-dreamcast/mach/sysasic.h | 43 ++ arch/sh/include/mach-landisk/mach/gio.h | 37 ++ arch/sh/include/mach-landisk/mach/iodata_landisk.h | 42 ++ arch/sh/include/mach-sh03/mach/io.h | 25 ++ arch/sh/include/mach-sh03/mach/sh03.h | 18 + arch/sh/kernel/cpu/irq/intc-sh5.c | 2 +- arch/sh/kernel/cpu/sh2/entry.S | 2 +- arch/sh/kernel/cpu/sh2a/entry.S | 2 +- arch/sh/kernel/cpu/sh3/entry.S | 2 +- arch/sh/kernel/cpu/sh4/fpu.c | 2 +- arch/sh/kernel/cpu/sh4/softfloat.c | 2 +- arch/sh/kernel/cpu/sh4/sq.c | 2 +- arch/sh/kernel/cpu/sh5/entry.S | 2 +- arch/sh/kernel/head_64.S | 4 +- arch/sh/kernel/irq.c | 2 +- arch/sh/kernel/time_64.c | 4 +- arch/sh/lib64/panic.c | 2 +- arch/sh/mm/fault_64.c | 2 +- arch/sh/tools/Makefile | 4 +- include/asm-sh/.gitignore | 3 - include/asm-sh/Kbuild | 8 - include/asm-sh/a.out.h | 20 - include/asm-sh/adc.h | 13 - include/asm-sh/addrspace.h | 53 --- include/asm-sh/atomic-grb.h | 169 -------- include/asm-sh/atomic-irq.h | 71 --- include/asm-sh/atomic-llsc.h | 107 ----- include/asm-sh/atomic.h | 89 ---- include/asm-sh/auxvec.h | 36 -- include/asm-sh/bitops-grb.h | 169 -------- include/asm-sh/bitops-irq.h | 91 ---- include/asm-sh/bitops.h | 103 ----- include/asm-sh/bug.h | 79 ---- include/asm-sh/bugs.h | 73 ---- include/asm-sh/byteorder.h | 70 --- include/asm-sh/cache.h | 51 --- include/asm-sh/cacheflush.h | 81 ---- include/asm-sh/checksum.h | 5 - include/asm-sh/checksum_32.h | 215 --------- include/asm-sh/checksum_64.h | 78 ---- include/asm-sh/clock.h | 97 ----- include/asm-sh/cmpxchg-grb.h | 70 --- include/asm-sh/cmpxchg-irq.h | 40 -- include/asm-sh/cpu-features.h | 25 -- include/asm-sh/cpu-sh2/addrspace.h | 19 - include/asm-sh/cpu-sh2/cache.h | 41 -- include/asm-sh/cpu-sh2/cacheflush.h | 44 -- include/asm-sh/cpu-sh2/dma.h | 23 - include/asm-sh/cpu-sh2/freq.h | 18 - include/asm-sh/cpu-sh2/mmu_context.h | 16 - include/asm-sh/cpu-sh2/rtc.h | 8 - include/asm-sh/cpu-sh2/sigcontext.h | 17 - include/asm-sh/cpu-sh2/timer.h | 6 - include/asm-sh/cpu-sh2/ubc.h | 32 -- include/asm-sh/cpu-sh2/watchdog.h | 69 --- include/asm-sh/cpu-sh2a/addrspace.h | 10 - include/asm-sh/cpu-sh2a/cache.h | 40 -- include/asm-sh/cpu-sh2a/cacheflush.h | 1 - include/asm-sh/cpu-sh2a/dma.h | 1 - include/asm-sh/cpu-sh2a/freq.h | 16 - include/asm-sh/cpu-sh2a/mmu_context.h | 1 - include/asm-sh/cpu-sh2a/rtc.h | 8 - include/asm-sh/cpu-sh2a/timer.h | 1 - include/asm-sh/cpu-sh2a/ubc.h | 1 - include/asm-sh/cpu-sh2a/watchdog.h | 1 - include/asm-sh/cpu-sh3/adc.h | 28 -- include/asm-sh/cpu-sh3/addrspace.h | 19 - include/asm-sh/cpu-sh3/cache.h | 43 -- include/asm-sh/cpu-sh3/cacheflush.h | 70 --- include/asm-sh/cpu-sh3/dac.h | 41 -- include/asm-sh/cpu-sh3/dma.h | 51 --- include/asm-sh/cpu-sh3/freq.h | 27 -- include/asm-sh/cpu-sh3/gpio.h | 67 --- include/asm-sh/cpu-sh3/mmu_context.h | 44 -- include/asm-sh/cpu-sh3/rtc.h | 8 - include/asm-sh/cpu-sh3/sigcontext.h | 17 - include/asm-sh/cpu-sh3/timer.h | 67 --- include/asm-sh/cpu-sh3/ubc.h | 42 -- include/asm-sh/cpu-sh3/watchdog.h | 25 -- include/asm-sh/cpu-sh4/addrspace.h | 35 -- include/asm-sh/cpu-sh4/cache.h | 42 -- include/asm-sh/cpu-sh4/cacheflush.h | 43 -- include/asm-sh/cpu-sh4/dma-sh7780.h | 39 -- include/asm-sh/cpu-sh4/dma.h | 65 --- include/asm-sh/cpu-sh4/fpu.h | 32 -- include/asm-sh/cpu-sh4/freq.h | 44 -- include/asm-sh/cpu-sh4/mmu_context.h | 63 --- include/asm-sh/cpu-sh4/rtc.h | 13 - include/asm-sh/cpu-sh4/sigcontext.h | 24 -- include/asm-sh/cpu-sh4/sq.h | 35 -- include/asm-sh/cpu-sh4/timer.h | 60 --- include/asm-sh/cpu-sh4/ubc.h | 64 --- include/asm-sh/cpu-sh4/watchdog.h | 25 -- include/asm-sh/cpu-sh5/addrspace.h | 11 - include/asm-sh/cpu-sh5/cache.h | 97 ----- include/asm-sh/cpu-sh5/cacheflush.h | 33 -- include/asm-sh/cpu-sh5/dma.h | 6 - include/asm-sh/cpu-sh5/irq.h | 117 ----- include/asm-sh/cpu-sh5/mmu_context.h | 21 - include/asm-sh/cpu-sh5/registers.h | 106 ----- include/asm-sh/cpu-sh5/rtc.h | 8 - include/asm-sh/cpu-sh5/timer.h | 4 - include/asm-sh/cputime.h | 6 - include/asm-sh/current.h | 20 - include/asm-sh/delay.h | 26 -- include/asm-sh/device.h | 12 - include/asm-sh/div64.h | 1 - include/asm-sh/dma-mapping.h | 192 --------- include/asm-sh/dma.h | 166 ------- include/asm-sh/dmabrg.h | 23 - include/asm-sh/dreamcast/dma.h | 34 -- include/asm-sh/dreamcast/maple.h | 37 -- include/asm-sh/dreamcast/pci.h | 25 -- include/asm-sh/dreamcast/sysasic.h | 43 -- include/asm-sh/edosk7705.h | 30 -- include/asm-sh/elf.h | 244 ----------- include/asm-sh/emergency-restart.h | 6 - include/asm-sh/entry-macros.S | 33 -- include/asm-sh/errno.h | 6 - include/asm-sh/fb.h | 19 - include/asm-sh/fcntl.h | 1 - include/asm-sh/fixmap.h | 117 ----- include/asm-sh/flat.h | 24 -- include/asm-sh/fpu.h | 55 --- include/asm-sh/freq.h | 18 - include/asm-sh/futex-irq.h | 111 ----- include/asm-sh/futex.h | 77 ---- include/asm-sh/gpio.h | 19 - include/asm-sh/hardirq.h | 16 - include/asm-sh/hd64461.h | 250 ----------- include/asm-sh/hd64465/gpio.h | 46 -- include/asm-sh/hd64465/hd64465.h | 256 ----------- include/asm-sh/hd64465/io.h | 44 -- include/asm-sh/heartbeat.h | 17 - include/asm-sh/hp6xx.h | 58 --- include/asm-sh/hugetlb.h | 92 ---- include/asm-sh/hw_irq.h | 123 ------ include/asm-sh/i2c-sh7760.h | 22 - include/asm-sh/ilsel.h | 45 -- include/asm-sh/io.h | 366 ---------------- include/asm-sh/io_generic.h | 49 --- include/asm-sh/io_trapped.h | 58 --- include/asm-sh/ioctl.h | 1 - include/asm-sh/ioctls.h | 103 ----- include/asm-sh/ipcbuf.h | 29 -- include/asm-sh/irq.h | 57 --- include/asm-sh/irq_regs.h | 1 - include/asm-sh/irqflags.h | 34 -- include/asm-sh/irqflags_32.h | 99 ----- include/asm-sh/irqflags_64.h | 85 ---- include/asm-sh/kdebug.h | 9 - include/asm-sh/kexec.h | 62 --- include/asm-sh/kgdb.h | 69 --- include/asm-sh/kmap_types.h | 32 -- include/asm-sh/landisk/gio.h | 37 -- include/asm-sh/landisk/iodata_landisk.h | 42 -- include/asm-sh/lboxre2.h | 27 -- include/asm-sh/linkage.h | 7 - include/asm-sh/local.h | 7 - include/asm-sh/machvec.h | 70 --- include/asm-sh/magicpanelr2.h | 67 --- include/asm-sh/mc146818rtc.h | 7 - include/asm-sh/microdev.h | 80 ---- include/asm-sh/migor.h | 65 --- include/asm-sh/mman.h | 17 - include/asm-sh/mmu.h | 76 ---- include/asm-sh/mmu_context.h | 185 -------- include/asm-sh/mmu_context_32.h | 47 -- include/asm-sh/mmu_context_64.h | 78 ---- include/asm-sh/mmzone.h | 48 --- include/asm-sh/module.h | 44 -- include/asm-sh/msgbuf.h | 31 -- include/asm-sh/mutex.h | 9 - include/asm-sh/page.h | 183 -------- include/asm-sh/param.h | 22 - include/asm-sh/parport.h | 16 - include/asm-sh/pci.h | 144 ------- include/asm-sh/percpu.h | 6 - include/asm-sh/pgalloc.h | 96 ----- include/asm-sh/pgtable.h | 152 ------- include/asm-sh/pgtable_32.h | 479 --------------------- include/asm-sh/pgtable_64.h | 314 -------------- include/asm-sh/pm.h | 17 - include/asm-sh/poll.h | 1 - include/asm-sh/posix_types.h | 13 - include/asm-sh/posix_types_32.h | 122 ------ include/asm-sh/posix_types_64.h | 131 ------ include/asm-sh/processor.h | 66 --- include/asm-sh/processor_32.h | 216 ---------- include/asm-sh/processor_64.h | 275 ------------ include/asm-sh/ptrace.h | 130 ------ include/asm-sh/push-switch.h | 31 -- include/asm-sh/r7780rp.h | 198 --------- include/asm-sh/resource.h | 6 - include/asm-sh/rtc.h | 16 - include/asm-sh/rts7751r2d.h | 70 --- include/asm-sh/rwsem.h | 188 -------- include/asm-sh/scatterlist.h | 27 -- include/asm-sh/sdk7780.h | 81 ---- include/asm-sh/se.h | 99 ----- include/asm-sh/se7206.h | 13 - include/asm-sh/se7343.h | 149 ------- include/asm-sh/se7721.h | 70 --- include/asm-sh/se7722.h | 112 ----- include/asm-sh/se7751.h | 73 ---- include/asm-sh/se7780.h | 108 ----- include/asm-sh/sections.h | 11 - include/asm-sh/segment.h | 34 -- include/asm-sh/sembuf.h | 25 -- include/asm-sh/serial.h | 36 -- include/asm-sh/setup.h | 27 -- include/asm-sh/sfp-machine.h | 84 ---- include/asm-sh/sh03/io.h | 25 -- include/asm-sh/sh03/sh03.h | 18 - include/asm-sh/sh7760fb.h | 197 --------- include/asm-sh/sh7763rdp.h | 54 --- include/asm-sh/sh7785lcr.h | 55 --- include/asm-sh/sh_bios.h | 19 - include/asm-sh/sh_keysc.h | 13 - include/asm-sh/sh_mobile_lcdc.h | 66 --- include/asm-sh/shmbuf.h | 42 -- include/asm-sh/shmin.h | 9 - include/asm-sh/shmparam.h | 22 - include/asm-sh/sigcontext.h | 40 -- include/asm-sh/siginfo.h | 6 - include/asm-sh/signal.h | 160 ------- include/asm-sh/smc37c93x.h | 190 -------- include/asm-sh/smp.h | 50 --- include/asm-sh/snapgear.h | 71 --- include/asm-sh/socket.h | 57 --- include/asm-sh/sockios.h | 14 - include/asm-sh/sparsemem.h | 16 - include/asm-sh/spi.h | 13 - include/asm-sh/spinlock.h | 223 ---------- include/asm-sh/spinlock_types.h | 21 - include/asm-sh/stat.h | 138 ------ include/asm-sh/statfs.h | 6 - include/asm-sh/string.h | 5 - include/asm-sh/string_32.h | 131 ------ include/asm-sh/string_64.h | 17 - include/asm-sh/system.h | 190 -------- include/asm-sh/system_32.h | 102 ----- include/asm-sh/system_64.h | 40 -- include/asm-sh/systemh7751.h | 71 --- include/asm-sh/termbits.h | 198 --------- include/asm-sh/termios.h | 90 ---- include/asm-sh/thread_info.h | 141 ------ include/asm-sh/timer.h | 44 -- include/asm-sh/timex.h | 18 - include/asm-sh/titan.h | 17 - include/asm-sh/tlb.h | 27 -- include/asm-sh/tlb_64.h | 77 ---- include/asm-sh/tlbflush.h | 49 --- include/asm-sh/topology.h | 47 -- include/asm-sh/types.h | 35 -- include/asm-sh/uaccess.h | 256 ----------- include/asm-sh/uaccess_32.h | 249 ----------- include/asm-sh/uaccess_64.h | 79 ---- include/asm-sh/ubc.h | 64 --- include/asm-sh/ucontext.h | 12 - include/asm-sh/unaligned.h | 19 - include/asm-sh/unistd.h | 13 - include/asm-sh/unistd_32.h | 384 ----------------- include/asm-sh/unistd_64.h | 423 ------------------ include/asm-sh/user.h | 67 --- include/asm-sh/vga.h | 6 - include/asm-sh/watchdog.h | 107 ----- include/asm-sh/xor.h | 1 - sound/sh/aica.c | 2 +- 539 files changed, 16622 insertions(+), 16485 deletions(-) create mode 100644 arch/sh/include/asm/.gitignore create mode 100644 arch/sh/include/asm/Kbuild create mode 100644 arch/sh/include/asm/a.out.h create mode 100644 arch/sh/include/asm/adc.h create mode 100644 arch/sh/include/asm/addrspace.h create mode 100644 arch/sh/include/asm/atomic-grb.h create mode 100644 arch/sh/include/asm/atomic-irq.h create mode 100644 arch/sh/include/asm/atomic-llsc.h create mode 100644 arch/sh/include/asm/atomic.h create mode 100644 arch/sh/include/asm/auxvec.h create mode 100644 arch/sh/include/asm/bitops-grb.h create mode 100644 arch/sh/include/asm/bitops-irq.h create mode 100644 arch/sh/include/asm/bitops.h create mode 100644 arch/sh/include/asm/bug.h create mode 100644 arch/sh/include/asm/bugs.h create mode 100644 arch/sh/include/asm/byteorder.h create mode 100644 arch/sh/include/asm/cache.h create mode 100644 arch/sh/include/asm/cacheflush.h create mode 100644 arch/sh/include/asm/checksum.h create mode 100644 arch/sh/include/asm/checksum_32.h create mode 100644 arch/sh/include/asm/checksum_64.h create mode 100644 arch/sh/include/asm/clock.h create mode 100644 arch/sh/include/asm/cmpxchg-grb.h create mode 100644 arch/sh/include/asm/cmpxchg-irq.h create mode 100644 arch/sh/include/asm/cpu-features.h create mode 100644 arch/sh/include/asm/cputime.h create mode 100644 arch/sh/include/asm/current.h create mode 100644 arch/sh/include/asm/delay.h create mode 100644 arch/sh/include/asm/device.h create mode 100644 arch/sh/include/asm/div64.h create mode 100644 arch/sh/include/asm/dma-mapping.h create mode 100644 arch/sh/include/asm/dma.h create mode 100644 arch/sh/include/asm/dmabrg.h create mode 100644 arch/sh/include/asm/edosk7705.h create mode 100644 arch/sh/include/asm/elf.h create mode 100644 arch/sh/include/asm/emergency-restart.h create mode 100644 arch/sh/include/asm/entry-macros.S create mode 100644 arch/sh/include/asm/errno.h create mode 100644 arch/sh/include/asm/fb.h create mode 100644 arch/sh/include/asm/fcntl.h create mode 100644 arch/sh/include/asm/fixmap.h create mode 100644 arch/sh/include/asm/flat.h create mode 100644 arch/sh/include/asm/fpu.h create mode 100644 arch/sh/include/asm/freq.h create mode 100644 arch/sh/include/asm/futex-irq.h create mode 100644 arch/sh/include/asm/futex.h create mode 100644 arch/sh/include/asm/gpio.h create mode 100644 arch/sh/include/asm/hardirq.h create mode 100644 arch/sh/include/asm/hd64461.h create mode 100644 arch/sh/include/asm/hd64465/gpio.h create mode 100644 arch/sh/include/asm/hd64465/hd64465.h create mode 100644 arch/sh/include/asm/hd64465/io.h create mode 100644 arch/sh/include/asm/heartbeat.h create mode 100644 arch/sh/include/asm/hp6xx.h create mode 100644 arch/sh/include/asm/hugetlb.h create mode 100644 arch/sh/include/asm/hw_irq.h create mode 100644 arch/sh/include/asm/i2c-sh7760.h create mode 100644 arch/sh/include/asm/ilsel.h create mode 100644 arch/sh/include/asm/io.h create mode 100644 arch/sh/include/asm/io_generic.h create mode 100644 arch/sh/include/asm/io_trapped.h create mode 100644 arch/sh/include/asm/ioctl.h create mode 100644 arch/sh/include/asm/ioctls.h create mode 100644 arch/sh/include/asm/ipcbuf.h create mode 100644 arch/sh/include/asm/irq.h create mode 100644 arch/sh/include/asm/irq_regs.h create mode 100644 arch/sh/include/asm/irqflags.h create mode 100644 arch/sh/include/asm/irqflags_32.h create mode 100644 arch/sh/include/asm/irqflags_64.h create mode 100644 arch/sh/include/asm/kdebug.h create mode 100644 arch/sh/include/asm/kexec.h create mode 100644 arch/sh/include/asm/kgdb.h create mode 100644 arch/sh/include/asm/kmap_types.h create mode 100644 arch/sh/include/asm/lboxre2.h create mode 100644 arch/sh/include/asm/linkage.h create mode 100644 arch/sh/include/asm/local.h create mode 100644 arch/sh/include/asm/machvec.h create mode 100644 arch/sh/include/asm/magicpanelr2.h create mode 100644 arch/sh/include/asm/mc146818rtc.h create mode 100644 arch/sh/include/asm/microdev.h create mode 100644 arch/sh/include/asm/migor.h create mode 100644 arch/sh/include/asm/mman.h create mode 100644 arch/sh/include/asm/mmu.h create mode 100644 arch/sh/include/asm/mmu_context.h create mode 100644 arch/sh/include/asm/mmu_context_32.h create mode 100644 arch/sh/include/asm/mmu_context_64.h create mode 100644 arch/sh/include/asm/mmzone.h create mode 100644 arch/sh/include/asm/module.h create mode 100644 arch/sh/include/asm/msgbuf.h create mode 100644 arch/sh/include/asm/mutex.h create mode 100644 arch/sh/include/asm/page.h create mode 100644 arch/sh/include/asm/param.h create mode 100644 arch/sh/include/asm/parport.h create mode 100644 arch/sh/include/asm/pci.h create mode 100644 arch/sh/include/asm/percpu.h create mode 100644 arch/sh/include/asm/pgalloc.h create mode 100644 arch/sh/include/asm/pgtable.h create mode 100644 arch/sh/include/asm/pgtable_32.h create mode 100644 arch/sh/include/asm/pgtable_64.h create mode 100644 arch/sh/include/asm/pm.h create mode 100644 arch/sh/include/asm/poll.h create mode 100644 arch/sh/include/asm/posix_types.h create mode 100644 arch/sh/include/asm/posix_types_32.h create mode 100644 arch/sh/include/asm/posix_types_64.h create mode 100644 arch/sh/include/asm/processor.h create mode 100644 arch/sh/include/asm/processor_32.h create mode 100644 arch/sh/include/asm/processor_64.h create mode 100644 arch/sh/include/asm/ptrace.h create mode 100644 arch/sh/include/asm/push-switch.h create mode 100644 arch/sh/include/asm/r7780rp.h create mode 100644 arch/sh/include/asm/resource.h create mode 100644 arch/sh/include/asm/rtc.h create mode 100644 arch/sh/include/asm/rts7751r2d.h create mode 100644 arch/sh/include/asm/rwsem.h create mode 100644 arch/sh/include/asm/scatterlist.h create mode 100644 arch/sh/include/asm/sdk7780.h create mode 100644 arch/sh/include/asm/se.h create mode 100644 arch/sh/include/asm/se7206.h create mode 100644 arch/sh/include/asm/se7343.h create mode 100644 arch/sh/include/asm/se7721.h create mode 100644 arch/sh/include/asm/se7722.h create mode 100644 arch/sh/include/asm/se7751.h create mode 100644 arch/sh/include/asm/se7780.h create mode 100644 arch/sh/include/asm/sections.h create mode 100644 arch/sh/include/asm/segment.h create mode 100644 arch/sh/include/asm/sembuf.h create mode 100644 arch/sh/include/asm/serial.h create mode 100644 arch/sh/include/asm/setup.h create mode 100644 arch/sh/include/asm/sfp-machine.h create mode 100644 arch/sh/include/asm/sh7760fb.h create mode 100644 arch/sh/include/asm/sh7763rdp.h create mode 100644 arch/sh/include/asm/sh7785lcr.h create mode 100644 arch/sh/include/asm/sh_bios.h create mode 100644 arch/sh/include/asm/sh_keysc.h create mode 100644 arch/sh/include/asm/sh_mobile_lcdc.h create mode 100644 arch/sh/include/asm/shmbuf.h create mode 100644 arch/sh/include/asm/shmin.h create mode 100644 arch/sh/include/asm/shmparam.h create mode 100644 arch/sh/include/asm/sigcontext.h create mode 100644 arch/sh/include/asm/siginfo.h create mode 100644 arch/sh/include/asm/signal.h create mode 100644 arch/sh/include/asm/smc37c93x.h create mode 100644 arch/sh/include/asm/smp.h create mode 100644 arch/sh/include/asm/snapgear.h create mode 100644 arch/sh/include/asm/socket.h create mode 100644 arch/sh/include/asm/sockios.h create mode 100644 arch/sh/include/asm/sparsemem.h create mode 100644 arch/sh/include/asm/spi.h create mode 100644 arch/sh/include/asm/spinlock.h create mode 100644 arch/sh/include/asm/spinlock_types.h create mode 100644 arch/sh/include/asm/stat.h create mode 100644 arch/sh/include/asm/statfs.h create mode 100644 arch/sh/include/asm/string.h create mode 100644 arch/sh/include/asm/string_32.h create mode 100644 arch/sh/include/asm/string_64.h create mode 100644 arch/sh/include/asm/system.h create mode 100644 arch/sh/include/asm/system_32.h create mode 100644 arch/sh/include/asm/system_64.h create mode 100644 arch/sh/include/asm/systemh7751.h create mode 100644 arch/sh/include/asm/termbits.h create mode 100644 arch/sh/include/asm/termios.h create mode 100644 arch/sh/include/asm/thread_info.h create mode 100644 arch/sh/include/asm/timer.h create mode 100644 arch/sh/include/asm/timex.h create mode 100644 arch/sh/include/asm/titan.h create mode 100644 arch/sh/include/asm/tlb.h create mode 100644 arch/sh/include/asm/tlb_64.h create mode 100644 arch/sh/include/asm/tlbflush.h create mode 100644 arch/sh/include/asm/topology.h create mode 100644 arch/sh/include/asm/types.h create mode 100644 arch/sh/include/asm/uaccess.h create mode 100644 arch/sh/include/asm/uaccess_32.h create mode 100644 arch/sh/include/asm/uaccess_64.h create mode 100644 arch/sh/include/asm/ubc.h create mode 100644 arch/sh/include/asm/ucontext.h create mode 100644 arch/sh/include/asm/unaligned.h create mode 100644 arch/sh/include/asm/unistd.h create mode 100644 arch/sh/include/asm/unistd_32.h create mode 100644 arch/sh/include/asm/unistd_64.h create mode 100644 arch/sh/include/asm/user.h create mode 100644 arch/sh/include/asm/vga.h create mode 100644 arch/sh/include/asm/watchdog.h create mode 100644 arch/sh/include/asm/xor.h create mode 100644 arch/sh/include/cpu-sh2/cpu/addrspace.h create mode 100644 arch/sh/include/cpu-sh2/cpu/cache.h create mode 100644 arch/sh/include/cpu-sh2/cpu/cacheflush.h create mode 100644 arch/sh/include/cpu-sh2/cpu/dma.h create mode 100644 arch/sh/include/cpu-sh2/cpu/freq.h create mode 100644 arch/sh/include/cpu-sh2/cpu/mmu_context.h create mode 100644 arch/sh/include/cpu-sh2/cpu/rtc.h create mode 100644 arch/sh/include/cpu-sh2/cpu/sigcontext.h create mode 100644 arch/sh/include/cpu-sh2/cpu/timer.h create mode 100644 arch/sh/include/cpu-sh2/cpu/ubc.h create mode 100644 arch/sh/include/cpu-sh2/cpu/watchdog.h create mode 100644 arch/sh/include/cpu-sh2a/cpu/addrspace.h create mode 100644 arch/sh/include/cpu-sh2a/cpu/cache.h create mode 100644 arch/sh/include/cpu-sh2a/cpu/cacheflush.h create mode 100644 arch/sh/include/cpu-sh2a/cpu/dma.h create mode 100644 arch/sh/include/cpu-sh2a/cpu/freq.h create mode 100644 arch/sh/include/cpu-sh2a/cpu/mmu_context.h create mode 100644 arch/sh/include/cpu-sh2a/cpu/rtc.h create mode 100644 arch/sh/include/cpu-sh2a/cpu/timer.h create mode 100644 arch/sh/include/cpu-sh2a/cpu/ubc.h create mode 100644 arch/sh/include/cpu-sh2a/cpu/watchdog.h create mode 100644 arch/sh/include/cpu-sh3/cpu/adc.h create mode 100644 arch/sh/include/cpu-sh3/cpu/addrspace.h create mode 100644 arch/sh/include/cpu-sh3/cpu/cache.h create mode 100644 arch/sh/include/cpu-sh3/cpu/cacheflush.h create mode 100644 arch/sh/include/cpu-sh3/cpu/dac.h create mode 100644 arch/sh/include/cpu-sh3/cpu/dma.h create mode 100644 arch/sh/include/cpu-sh3/cpu/freq.h create mode 100644 arch/sh/include/cpu-sh3/cpu/gpio.h create mode 100644 arch/sh/include/cpu-sh3/cpu/mmu_context.h create mode 100644 arch/sh/include/cpu-sh3/cpu/rtc.h create mode 100644 arch/sh/include/cpu-sh3/cpu/sigcontext.h create mode 100644 arch/sh/include/cpu-sh3/cpu/timer.h create mode 100644 arch/sh/include/cpu-sh3/cpu/ubc.h create mode 100644 arch/sh/include/cpu-sh3/cpu/watchdog.h create mode 100644 arch/sh/include/cpu-sh4/cpu/addrspace.h create mode 100644 arch/sh/include/cpu-sh4/cpu/cache.h create mode 100644 arch/sh/include/cpu-sh4/cpu/cacheflush.h create mode 100644 arch/sh/include/cpu-sh4/cpu/dma-sh7780.h create mode 100644 arch/sh/include/cpu-sh4/cpu/dma.h create mode 100644 arch/sh/include/cpu-sh4/cpu/fpu.h create mode 100644 arch/sh/include/cpu-sh4/cpu/freq.h create mode 100644 arch/sh/include/cpu-sh4/cpu/mmu_context.h create mode 100644 arch/sh/include/cpu-sh4/cpu/rtc.h create mode 100644 arch/sh/include/cpu-sh4/cpu/sigcontext.h create mode 100644 arch/sh/include/cpu-sh4/cpu/sq.h create mode 100644 arch/sh/include/cpu-sh4/cpu/timer.h create mode 100644 arch/sh/include/cpu-sh4/cpu/ubc.h create mode 100644 arch/sh/include/cpu-sh4/cpu/watchdog.h create mode 100644 arch/sh/include/cpu-sh5/cpu/addrspace.h create mode 100644 arch/sh/include/cpu-sh5/cpu/cache.h create mode 100644 arch/sh/include/cpu-sh5/cpu/cacheflush.h create mode 100644 arch/sh/include/cpu-sh5/cpu/dma.h create mode 100644 arch/sh/include/cpu-sh5/cpu/irq.h create mode 100644 arch/sh/include/cpu-sh5/cpu/mmu_context.h create mode 100644 arch/sh/include/cpu-sh5/cpu/registers.h create mode 100644 arch/sh/include/cpu-sh5/cpu/rtc.h create mode 100644 arch/sh/include/cpu-sh5/cpu/timer.h create mode 100644 arch/sh/include/mach-dreamcast/mach/dma.h create mode 100644 arch/sh/include/mach-dreamcast/mach/maple.h create mode 100644 arch/sh/include/mach-dreamcast/mach/pci.h create mode 100644 arch/sh/include/mach-dreamcast/mach/sysasic.h create mode 100644 arch/sh/include/mach-landisk/mach/gio.h create mode 100644 arch/sh/include/mach-landisk/mach/iodata_landisk.h create mode 100644 arch/sh/include/mach-sh03/mach/io.h create mode 100644 arch/sh/include/mach-sh03/mach/sh03.h delete mode 100644 include/asm-sh/.gitignore delete mode 100644 include/asm-sh/Kbuild delete mode 100644 include/asm-sh/a.out.h delete mode 100644 include/asm-sh/adc.h delete mode 100644 include/asm-sh/addrspace.h delete mode 100644 include/asm-sh/atomic-grb.h delete mode 100644 include/asm-sh/atomic-irq.h delete mode 100644 include/asm-sh/atomic-llsc.h delete mode 100644 include/asm-sh/atomic.h delete mode 100644 include/asm-sh/auxvec.h delete mode 100644 include/asm-sh/bitops-grb.h delete mode 100644 include/asm-sh/bitops-irq.h delete mode 100644 include/asm-sh/bitops.h delete mode 100644 include/asm-sh/bug.h delete mode 100644 include/asm-sh/bugs.h delete mode 100644 include/asm-sh/byteorder.h delete mode 100644 include/asm-sh/cache.h delete mode 100644 include/asm-sh/cacheflush.h delete mode 100644 include/asm-sh/checksum.h delete mode 100644 include/asm-sh/checksum_32.h delete mode 100644 include/asm-sh/checksum_64.h delete mode 100644 include/asm-sh/clock.h delete mode 100644 include/asm-sh/cmpxchg-grb.h delete mode 100644 include/asm-sh/cmpxchg-irq.h delete mode 100644 include/asm-sh/cpu-features.h delete mode 100644 include/asm-sh/cpu-sh2/addrspace.h delete mode 100644 include/asm-sh/cpu-sh2/cache.h delete mode 100644 include/asm-sh/cpu-sh2/cacheflush.h delete mode 100644 include/asm-sh/cpu-sh2/dma.h delete mode 100644 include/asm-sh/cpu-sh2/freq.h delete mode 100644 include/asm-sh/cpu-sh2/mmu_context.h delete mode 100644 include/asm-sh/cpu-sh2/rtc.h delete mode 100644 include/asm-sh/cpu-sh2/sigcontext.h delete mode 100644 include/asm-sh/cpu-sh2/timer.h delete mode 100644 include/asm-sh/cpu-sh2/ubc.h delete mode 100644 include/asm-sh/cpu-sh2/watchdog.h delete mode 100644 include/asm-sh/cpu-sh2a/addrspace.h delete mode 100644 include/asm-sh/cpu-sh2a/cache.h delete mode 100644 include/asm-sh/cpu-sh2a/cacheflush.h delete mode 100644 include/asm-sh/cpu-sh2a/dma.h delete mode 100644 include/asm-sh/cpu-sh2a/freq.h delete mode 100644 include/asm-sh/cpu-sh2a/mmu_context.h delete mode 100644 include/asm-sh/cpu-sh2a/rtc.h delete mode 100644 include/asm-sh/cpu-sh2a/timer.h delete mode 100644 include/asm-sh/cpu-sh2a/ubc.h delete mode 100644 include/asm-sh/cpu-sh2a/watchdog.h delete mode 100644 include/asm-sh/cpu-sh3/adc.h delete mode 100644 include/asm-sh/cpu-sh3/addrspace.h delete mode 100644 include/asm-sh/cpu-sh3/cache.h delete mode 100644 include/asm-sh/cpu-sh3/cacheflush.h delete mode 100644 include/asm-sh/cpu-sh3/dac.h delete mode 100644 include/asm-sh/cpu-sh3/dma.h delete mode 100644 include/asm-sh/cpu-sh3/freq.h delete mode 100644 include/asm-sh/cpu-sh3/gpio.h delete mode 100644 include/asm-sh/cpu-sh3/mmu_context.h delete mode 100644 include/asm-sh/cpu-sh3/rtc.h delete mode 100644 include/asm-sh/cpu-sh3/sigcontext.h delete mode 100644 include/asm-sh/cpu-sh3/timer.h delete mode 100644 include/asm-sh/cpu-sh3/ubc.h delete mode 100644 include/asm-sh/cpu-sh3/watchdog.h delete mode 100644 include/asm-sh/cpu-sh4/addrspace.h delete mode 100644 include/asm-sh/cpu-sh4/cache.h delete mode 100644 include/asm-sh/cpu-sh4/cacheflush.h delete mode 100644 include/asm-sh/cpu-sh4/dma-sh7780.h delete mode 100644 include/asm-sh/cpu-sh4/dma.h delete mode 100644 include/asm-sh/cpu-sh4/fpu.h delete mode 100644 include/asm-sh/cpu-sh4/freq.h delete mode 100644 include/asm-sh/cpu-sh4/mmu_context.h delete mode 100644 include/asm-sh/cpu-sh4/rtc.h delete mode 100644 include/asm-sh/cpu-sh4/sigcontext.h delete mode 100644 include/asm-sh/cpu-sh4/sq.h delete mode 100644 include/asm-sh/cpu-sh4/timer.h delete mode 100644 include/asm-sh/cpu-sh4/ubc.h delete mode 100644 include/asm-sh/cpu-sh4/watchdog.h delete mode 100644 include/asm-sh/cpu-sh5/addrspace.h delete mode 100644 include/asm-sh/cpu-sh5/cache.h delete mode 100644 include/asm-sh/cpu-sh5/cacheflush.h delete mode 100644 include/asm-sh/cpu-sh5/dma.h delete mode 100644 include/asm-sh/cpu-sh5/irq.h delete mode 100644 include/asm-sh/cpu-sh5/mmu_context.h delete mode 100644 include/asm-sh/cpu-sh5/registers.h delete mode 100644 include/asm-sh/cpu-sh5/rtc.h delete mode 100644 include/asm-sh/cpu-sh5/timer.h delete mode 100644 include/asm-sh/cputime.h delete mode 100644 include/asm-sh/current.h delete mode 100644 include/asm-sh/delay.h delete mode 100644 include/asm-sh/device.h delete mode 100644 include/asm-sh/div64.h delete mode 100644 include/asm-sh/dma-mapping.h delete mode 100644 include/asm-sh/dma.h delete mode 100644 include/asm-sh/dmabrg.h delete mode 100644 include/asm-sh/dreamcast/dma.h delete mode 100644 include/asm-sh/dreamcast/maple.h delete mode 100644 include/asm-sh/dreamcast/pci.h delete mode 100644 include/asm-sh/dreamcast/sysasic.h delete mode 100644 include/asm-sh/edosk7705.h delete mode 100644 include/asm-sh/elf.h delete mode 100644 include/asm-sh/emergency-restart.h delete mode 100644 include/asm-sh/entry-macros.S delete mode 100644 include/asm-sh/errno.h delete mode 100644 include/asm-sh/fb.h delete mode 100644 include/asm-sh/fcntl.h delete mode 100644 include/asm-sh/fixmap.h delete mode 100644 include/asm-sh/flat.h delete mode 100644 include/asm-sh/fpu.h delete mode 100644 include/asm-sh/freq.h delete mode 100644 include/asm-sh/futex-irq.h delete mode 100644 include/asm-sh/futex.h delete mode 100644 include/asm-sh/gpio.h delete mode 100644 include/asm-sh/hardirq.h delete mode 100644 include/asm-sh/hd64461.h delete mode 100644 include/asm-sh/hd64465/gpio.h delete mode 100644 include/asm-sh/hd64465/hd64465.h delete mode 100644 include/asm-sh/hd64465/io.h delete mode 100644 include/asm-sh/heartbeat.h delete mode 100644 include/asm-sh/hp6xx.h delete mode 100644 include/asm-sh/hugetlb.h delete mode 100644 include/asm-sh/hw_irq.h delete mode 100644 include/asm-sh/i2c-sh7760.h delete mode 100644 include/asm-sh/ilsel.h delete mode 100644 include/asm-sh/io.h delete mode 100644 include/asm-sh/io_generic.h delete mode 100644 include/asm-sh/io_trapped.h delete mode 100644 include/asm-sh/ioctl.h delete mode 100644 include/asm-sh/ioctls.h delete mode 100644 include/asm-sh/ipcbuf.h delete mode 100644 include/asm-sh/irq.h delete mode 100644 include/asm-sh/irq_regs.h delete mode 100644 include/asm-sh/irqflags.h delete mode 100644 include/asm-sh/irqflags_32.h delete mode 100644 include/asm-sh/irqflags_64.h delete mode 100644 include/asm-sh/kdebug.h delete mode 100644 include/asm-sh/kexec.h delete mode 100644 include/asm-sh/kgdb.h delete mode 100644 include/asm-sh/kmap_types.h delete mode 100644 include/asm-sh/landisk/gio.h delete mode 100644 include/asm-sh/landisk/iodata_landisk.h delete mode 100644 include/asm-sh/lboxre2.h delete mode 100644 include/asm-sh/linkage.h delete mode 100644 include/asm-sh/local.h delete mode 100644 include/asm-sh/machvec.h delete mode 100644 include/asm-sh/magicpanelr2.h delete mode 100644 include/asm-sh/mc146818rtc.h delete mode 100644 include/asm-sh/microdev.h delete mode 100644 include/asm-sh/migor.h delete mode 100644 include/asm-sh/mman.h delete mode 100644 include/asm-sh/mmu.h delete mode 100644 include/asm-sh/mmu_context.h delete mode 100644 include/asm-sh/mmu_context_32.h delete mode 100644 include/asm-sh/mmu_context_64.h delete mode 100644 include/asm-sh/mmzone.h delete mode 100644 include/asm-sh/module.h delete mode 100644 include/asm-sh/msgbuf.h delete mode 100644 include/asm-sh/mutex.h delete mode 100644 include/asm-sh/page.h delete mode 100644 include/asm-sh/param.h delete mode 100644 include/asm-sh/parport.h delete mode 100644 include/asm-sh/pci.h delete mode 100644 include/asm-sh/percpu.h delete mode 100644 include/asm-sh/pgalloc.h delete mode 100644 include/asm-sh/pgtable.h delete mode 100644 include/asm-sh/pgtable_32.h delete mode 100644 include/asm-sh/pgtable_64.h delete mode 100644 include/asm-sh/pm.h delete mode 100644 include/asm-sh/poll.h delete mode 100644 include/asm-sh/posix_types.h delete mode 100644 include/asm-sh/posix_types_32.h delete mode 100644 include/asm-sh/posix_types_64.h delete mode 100644 include/asm-sh/processor.h delete mode 100644 include/asm-sh/processor_32.h delete mode 100644 include/asm-sh/processor_64.h delete mode 100644 include/asm-sh/ptrace.h delete mode 100644 include/asm-sh/push-switch.h delete mode 100644 include/asm-sh/r7780rp.h delete mode 100644 include/asm-sh/resource.h delete mode 100644 include/asm-sh/rtc.h delete mode 100644 include/asm-sh/rts7751r2d.h delete mode 100644 include/asm-sh/rwsem.h delete mode 100644 include/asm-sh/scatterlist.h delete mode 100644 include/asm-sh/sdk7780.h delete mode 100644 include/asm-sh/se.h delete mode 100644 include/asm-sh/se7206.h delete mode 100644 include/asm-sh/se7343.h delete mode 100644 include/asm-sh/se7721.h delete mode 100644 include/asm-sh/se7722.h delete mode 100644 include/asm-sh/se7751.h delete mode 100644 include/asm-sh/se7780.h delete mode 100644 include/asm-sh/sections.h delete mode 100644 include/asm-sh/segment.h delete mode 100644 include/asm-sh/sembuf.h delete mode 100644 include/asm-sh/serial.h delete mode 100644 include/asm-sh/setup.h delete mode 100644 include/asm-sh/sfp-machine.h delete mode 100644 include/asm-sh/sh03/io.h delete mode 100644 include/asm-sh/sh03/sh03.h delete mode 100644 include/asm-sh/sh7760fb.h delete mode 100644 include/asm-sh/sh7763rdp.h delete mode 100644 include/asm-sh/sh7785lcr.h delete mode 100644 include/asm-sh/sh_bios.h delete mode 100644 include/asm-sh/sh_keysc.h delete mode 100644 include/asm-sh/sh_mobile_lcdc.h delete mode 100644 include/asm-sh/shmbuf.h delete mode 100644 include/asm-sh/shmin.h delete mode 100644 include/asm-sh/shmparam.h delete mode 100644 include/asm-sh/sigcontext.h delete mode 100644 include/asm-sh/siginfo.h delete mode 100644 include/asm-sh/signal.h delete mode 100644 include/asm-sh/smc37c93x.h delete mode 100644 include/asm-sh/smp.h delete mode 100644 include/asm-sh/snapgear.h delete mode 100644 include/asm-sh/socket.h delete mode 100644 include/asm-sh/sockios.h delete mode 100644 include/asm-sh/sparsemem.h delete mode 100644 include/asm-sh/spi.h delete mode 100644 include/asm-sh/spinlock.h delete mode 100644 include/asm-sh/spinlock_types.h delete mode 100644 include/asm-sh/stat.h delete mode 100644 include/asm-sh/statfs.h delete mode 100644 include/asm-sh/string.h delete mode 100644 include/asm-sh/string_32.h delete mode 100644 include/asm-sh/string_64.h delete mode 100644 include/asm-sh/system.h delete mode 100644 include/asm-sh/system_32.h delete mode 100644 include/asm-sh/system_64.h delete mode 100644 include/asm-sh/systemh7751.h delete mode 100644 include/asm-sh/termbits.h delete mode 100644 include/asm-sh/termios.h delete mode 100644 include/asm-sh/thread_info.h delete mode 100644 include/asm-sh/timer.h delete mode 100644 include/asm-sh/timex.h delete mode 100644 include/asm-sh/titan.h delete mode 100644 include/asm-sh/tlb.h delete mode 100644 include/asm-sh/tlb_64.h delete mode 100644 include/asm-sh/tlbflush.h delete mode 100644 include/asm-sh/topology.h delete mode 100644 include/asm-sh/types.h delete mode 100644 include/asm-sh/uaccess.h delete mode 100644 include/asm-sh/uaccess_32.h delete mode 100644 include/asm-sh/uaccess_64.h delete mode 100644 include/asm-sh/ubc.h delete mode 100644 include/asm-sh/ucontext.h delete mode 100644 include/asm-sh/unaligned.h delete mode 100644 include/asm-sh/unistd.h delete mode 100644 include/asm-sh/unistd_32.h delete mode 100644 include/asm-sh/unistd_64.h delete mode 100644 include/asm-sh/user.h delete mode 100644 include/asm-sh/vga.h delete mode 100644 include/asm-sh/watchdog.h delete mode 100644 include/asm-sh/xor.h (limited to 'arch/sh/boards') diff --git a/arch/sh/Makefile b/arch/sh/Makefile index c627e45c4df..fbf87562831 100644 --- a/arch/sh/Makefile +++ b/arch/sh/Makefile @@ -91,8 +91,6 @@ LDFLAGS_vmlinux += --defsym 'jiffies=jiffies_64+4' LDFLAGS += -EB endif -KBUILD_CFLAGS += -pipe $(cflags-y) -KBUILD_AFLAGS += $(cflags-y) head-y := arch/sh/kernel/init_task.o head-$(CONFIG_SUPERH32) += arch/sh/kernel/head_32.o @@ -160,57 +158,17 @@ drivers-$(CONFIG_OPROFILE) += arch/sh/oprofile/ boot := arch/sh/boot -ifneq ($(KBUILD_SRC),) -incdir-prefix := $(srctree)/include/asm-sh/ -else -incdir-prefix := -endif - -# Update machine arch and proc symlinks if something which affects -# them changed. We use .arch and .mach to indicate when they were -# updated last, otherwise make uses the target directory mtime. +cflags-y += -Iarch/sh/include/$(cpuincdir-y) +cflags-y += $(foreach d, $(incdir-y), -Iarch/sh/include/mach-$(d)) -include/asm-sh/.cpu: $(wildcard include/config/cpu/*.h) \ - include/config/auto.conf FORCE - @echo ' SYMLINK include/asm-sh/cpu -> include/asm-sh/$(cpuincdir-y)' - $(Q)if [ ! -d include/asm-sh ]; then mkdir -p include/asm-sh; fi - $(Q)ln -fsn $(incdir-prefix)$(cpuincdir-y) include/asm-sh/cpu - @touch $@ - -# Most boards have their own mach directories. For the ones that -# don't, just reference the parent directory so the semantics are -# kept roughly the same. -# -# When multiple boards are compiled in at the same time, preference -# for the mach link is given to whichever has a directory for its -# headers. However, this is only a workaround until platforms that -# can live in the same kernel image back away from relying on the -# mach link. - -include/asm-sh/.mach: $(wildcard include/config/sh/*.h) \ - include/config/auto.conf FORCE - $(Q)if [ ! -d include/asm-sh ]; then mkdir -p include/asm-sh; fi - $(Q)rm -f include/asm-sh/mach - $(Q)for i in $(incdir-y); do \ - if [ -d $(srctree)/include/asm-sh/$$i ]; then \ - echo -n ' SYMLINK include/asm-sh/mach -> '; \ - echo -e "include/asm-sh/$$i"; \ - ln -fsn $(incdir-prefix)$$i \ - include/asm-sh/mach; \ - else \ - if [ ! -d include/asm-sh/mach ]; then \ - echo -n ' SYMLINK include/asm-sh/mach -> '; \ - echo -e 'include/asm-sh'; \ - ln -fsn $(incdir-prefix)../asm-sh include/asm-sh/mach; \ - fi; \ - fi; \ - done - @touch $@ +KBUILD_CFLAGS += -pipe $(cflags-y) +KBUILD_CPPFLAGS += $(cflags-y) +KBUILD_AFLAGS += $(cflags-y) PHONY += maketools FORCE maketools: include/linux/version.h FORCE - $(Q)$(MAKE) $(build)=arch/sh/tools include/asm-sh/machtypes.h + $(Q)$(MAKE) $(build)=arch/sh/tools arch/sh/include/asm/machtypes.h all: $(KBUILD_IMAGE) @@ -219,8 +177,7 @@ zImage uImage uImage.srec vmlinux.srec: vmlinux compressed: zImage -archprepare: include/asm-sh/.cpu include/asm-sh/.mach maketools \ - arch/sh/lib64/syscalltab.h +archprepare: maketools arch/sh/lib64/syscalltab.h archclean: $(Q)$(MAKE) $(clean)=$(boot) @@ -262,6 +219,4 @@ arch/sh/lib64/syscalltab.h: arch/sh/kernel/syscalls_64.S $(call filechk,gen-syscalltab) CLEAN_FILES += arch/sh/lib64/syscalltab.h \ - include/asm-sh/machtypes.h \ - include/asm-sh/cpu include/asm-sh/.cpu \ - include/asm-sh/mach include/asm-sh/.mach + arch/sh/include/asm/machtypes.h diff --git a/arch/sh/boards/cayman/irq.c b/arch/sh/boards/cayman/irq.c index 30ec7bebfaf..ceb37ae92c7 100644 --- a/arch/sh/boards/cayman/irq.c +++ b/arch/sh/boards/cayman/irq.c @@ -13,7 +13,7 @@ #include #include #include -#include +#include #include /* Setup for the SMSC FDC37C935 / LAN91C100FD */ diff --git a/arch/sh/boards/cayman/setup.c b/arch/sh/boards/cayman/setup.c index 8c9fa472d8f..e7f9cc5f2ff 100644 --- a/arch/sh/boards/cayman/setup.c +++ b/arch/sh/boards/cayman/setup.c @@ -13,7 +13,7 @@ #include #include #include -#include +#include /* * Platform Dependent Interrupt Priorities. diff --git a/arch/sh/boards/dreamcast/irq.c b/arch/sh/boards/dreamcast/irq.c index 9d0673a9092..67bdc33dd41 100644 --- a/arch/sh/boards/dreamcast/irq.c +++ b/arch/sh/boards/dreamcast/irq.c @@ -12,7 +12,7 @@ #include #include #include -#include +#include /* Dreamcast System ASIC Hardware Events - diff --git a/arch/sh/boards/dreamcast/setup.c b/arch/sh/boards/dreamcast/setup.c index 2581c8cd5df..14c3e57ff41 100644 --- a/arch/sh/boards/dreamcast/setup.c +++ b/arch/sh/boards/dreamcast/setup.c @@ -25,8 +25,8 @@ #include #include #include -#include -#include +#include +#include extern struct hw_interrupt_type systemasic_int; extern void aica_time_init(void); diff --git a/arch/sh/boards/hp6xx/pm.c b/arch/sh/boards/hp6xx/pm.c index d22f6eac9cc..e96684def78 100644 --- a/arch/sh/boards/hp6xx/pm.c +++ b/arch/sh/boards/hp6xx/pm.c @@ -13,7 +13,7 @@ #include #include #include -#include +#include #include #define STBCR 0xffffff82 diff --git a/arch/sh/boards/hp6xx/pm_wakeup.S b/arch/sh/boards/hp6xx/pm_wakeup.S index 45e9bf0b911..44b648cf6f2 100644 --- a/arch/sh/boards/hp6xx/pm_wakeup.S +++ b/arch/sh/boards/hp6xx/pm_wakeup.S @@ -8,7 +8,7 @@ */ #include -#include +#include #define k0 r0 #define k1 r1 diff --git a/arch/sh/boards/hp6xx/setup.c b/arch/sh/boards/hp6xx/setup.c index 2f414ac3c69..475b46caec1 100644 --- a/arch/sh/boards/hp6xx/setup.c +++ b/arch/sh/boards/hp6xx/setup.c @@ -16,7 +16,7 @@ #include #include #include -#include +#include #define SCPCR 0xa4000116 #define SCPDR 0xa4000136 diff --git a/arch/sh/boards/landisk/gio.c b/arch/sh/boards/landisk/gio.c index 0c15b0a50b9..edcde082032 100644 --- a/arch/sh/boards/landisk/gio.c +++ b/arch/sh/boards/landisk/gio.c @@ -20,8 +20,8 @@ #include #include #include -#include -#include +#include +#include #define DEVCOUNT 4 #define GIO_MINOR 2 /* GIO minor no. */ diff --git a/arch/sh/boards/landisk/irq.c b/arch/sh/boards/landisk/irq.c index 258649491d4..d0f9378f6ff 100644 --- a/arch/sh/boards/landisk/irq.c +++ b/arch/sh/boards/landisk/irq.c @@ -16,7 +16,7 @@ #include #include #include -#include +#include static void disable_landisk_irq(unsigned int irq) { diff --git a/arch/sh/boards/landisk/psw.c b/arch/sh/boards/landisk/psw.c index 5a9b70b5dec..4bd502cbaee 100644 --- a/arch/sh/boards/landisk/psw.c +++ b/arch/sh/boards/landisk/psw.c @@ -14,7 +14,7 @@ #include #include #include -#include +#include #include static irqreturn_t psw_irq_handler(int irq, void *arg) diff --git a/arch/sh/boards/landisk/setup.c b/arch/sh/boards/landisk/setup.c index 2b708ec7255..470c7811168 100644 --- a/arch/sh/boards/landisk/setup.c +++ b/arch/sh/boards/landisk/setup.c @@ -18,7 +18,7 @@ #include #include #include -#include +#include #include void init_landisk_IRQ(void); diff --git a/arch/sh/boards/renesas/r7780rp/psw.c b/arch/sh/boards/renesas/r7780rp/psw.c index c844dfa5d58..0b3e062e96c 100644 --- a/arch/sh/boards/renesas/r7780rp/psw.c +++ b/arch/sh/boards/renesas/r7780rp/psw.c @@ -13,7 +13,7 @@ #include #include #include -#include +#include #include static irqreturn_t psw_irq_handler(int irq, void *arg) diff --git a/arch/sh/boards/se/7343/io.c b/arch/sh/boards/se/7343/io.c index 3a6d1142493..e2fae32d27d 100644 --- a/arch/sh/boards/se/7343/io.c +++ b/arch/sh/boards/se/7343/io.c @@ -6,7 +6,7 @@ */ #include #include -#include +#include #define badio(fn, a) panic("bad i/o operation %s for %08lx.", #fn, a) diff --git a/arch/sh/boards/se/7343/setup.c b/arch/sh/boards/se/7343/setup.c index 8ae718d6c71..59dc92e20f6 100644 --- a/arch/sh/boards/se/7343/setup.c +++ b/arch/sh/boards/se/7343/setup.c @@ -1,8 +1,8 @@ #include #include #include -#include -#include +#include +#include #include #include #include diff --git a/arch/sh/boards/sh03/setup.c b/arch/sh/boards/sh03/setup.c index 934ac4f1c48..cd9cff1ed34 100644 --- a/arch/sh/boards/sh03/setup.c +++ b/arch/sh/boards/sh03/setup.c @@ -11,8 +11,8 @@ #include #include #include -#include -#include +#include +#include #include static void __init init_sh03_IRQ(void) diff --git a/arch/sh/boards/snapgear/setup.c b/arch/sh/boards/snapgear/setup.c index 7022483f98e..a5e349d3dda 100644 --- a/arch/sh/boards/snapgear/setup.c +++ b/arch/sh/boards/snapgear/setup.c @@ -22,7 +22,7 @@ #include #include #include -#include +#include /* * EraseConfig handling functions diff --git a/arch/sh/boot/compressed/head_64.S b/arch/sh/boot/compressed/head_64.S index f72c1989f5f..622eac3cf55 100644 --- a/arch/sh/boot/compressed/head_64.S +++ b/arch/sh/boot/compressed/head_64.S @@ -14,8 +14,8 @@ * Copyright (C) 2002 Stuart Menefy (stuart.menefy@st.com) */ #include -#include -#include +#include +#include /* * Fixed TLB entries to identity map the beginning of RAM diff --git a/arch/sh/drivers/dma/dma-g2.c b/arch/sh/drivers/dma/dma-g2.c index 0caf11bb7e2..af7bb589c2c 100644 --- a/arch/sh/drivers/dma/dma-g2.c +++ b/arch/sh/drivers/dma/dma-g2.c @@ -14,8 +14,8 @@ #include #include #include -#include -#include +#include +#include #include struct g2_channel { diff --git a/arch/sh/drivers/dma/dma-pvr2.c b/arch/sh/drivers/dma/dma-pvr2.c index 838fad566ea..391cbe1c295 100644 --- a/arch/sh/drivers/dma/dma-pvr2.c +++ b/arch/sh/drivers/dma/dma-pvr2.c @@ -13,8 +13,8 @@ #include #include #include -#include -#include +#include +#include #include #include diff --git a/arch/sh/drivers/dma/dma-sh.c b/arch/sh/drivers/dma/dma-sh.c index 71ff3d6f26e..bd305483c14 100644 --- a/arch/sh/drivers/dma/dma-sh.c +++ b/arch/sh/drivers/dma/dma-sh.c @@ -14,7 +14,7 @@ #include #include #include -#include +#include #include #include #include "dma-sh.h" diff --git a/arch/sh/drivers/dma/dma-sh.h b/arch/sh/drivers/dma/dma-sh.h index 0f591fbc922..b05af34fc15 100644 --- a/arch/sh/drivers/dma/dma-sh.h +++ b/arch/sh/drivers/dma/dma-sh.h @@ -11,7 +11,7 @@ #ifndef __DMA_SH_H #define __DMA_SH_H -#include +#include /* Definitions for the SuperH DMAC */ #define REQ_L 0x00000000 diff --git a/arch/sh/drivers/pci/fixups-dreamcast.c b/arch/sh/drivers/pci/fixups-dreamcast.c index c44699301ee..2bf85cf091e 100644 --- a/arch/sh/drivers/pci/fixups-dreamcast.c +++ b/arch/sh/drivers/pci/fixups-dreamcast.c @@ -26,7 +26,7 @@ #include #include -#include +#include static void __init gapspci_fixup_resources(struct pci_dev *dev) { diff --git a/arch/sh/drivers/pci/ops-cayman.c b/arch/sh/drivers/pci/ops-cayman.c index 980275ffa30..5ccf9ea3a9d 100644 --- a/arch/sh/drivers/pci/ops-cayman.c +++ b/arch/sh/drivers/pci/ops-cayman.c @@ -2,7 +2,7 @@ #include #include #include -#include +#include #include "pci-sh5.h" static inline u8 bridge_swizzle(u8 pin, u8 slot) diff --git a/arch/sh/drivers/pci/ops-dreamcast.c b/arch/sh/drivers/pci/ops-dreamcast.c index f54c291db37..f5d2a2aa6f3 100644 --- a/arch/sh/drivers/pci/ops-dreamcast.c +++ b/arch/sh/drivers/pci/ops-dreamcast.c @@ -26,7 +26,7 @@ #include #include -#include +#include static struct resource gapspci_io_resource = { .name = "GAPSPCI IO", diff --git a/arch/sh/drivers/pci/pci-sh5.c b/arch/sh/drivers/pci/pci-sh5.c index a00a4df8c02..7a97438762c 100644 --- a/arch/sh/drivers/pci/pci-sh5.c +++ b/arch/sh/drivers/pci/pci-sh5.c @@ -19,7 +19,7 @@ #include #include #include -#include +#include #include #include #include "pci-sh5.h" diff --git a/arch/sh/include/asm/.gitignore b/arch/sh/include/asm/.gitignore new file mode 100644 index 00000000000..378db779fb6 --- /dev/null +++ b/arch/sh/include/asm/.gitignore @@ -0,0 +1 @@ +machtypes.h diff --git a/arch/sh/include/asm/Kbuild b/arch/sh/include/asm/Kbuild new file mode 100644 index 00000000000..43910cdf78a --- /dev/null +++ b/arch/sh/include/asm/Kbuild @@ -0,0 +1,8 @@ +include include/asm-generic/Kbuild.asm + +header-y += cpu-features.h + +unifdef-y += unistd_32.h +unifdef-y += unistd_64.h +unifdef-y += posix_types_32.h +unifdef-y += posix_types_64.h diff --git a/arch/sh/include/asm/a.out.h b/arch/sh/include/asm/a.out.h new file mode 100644 index 00000000000..1f93130e179 --- /dev/null +++ b/arch/sh/include/asm/a.out.h @@ -0,0 +1,20 @@ +#ifndef __ASM_SH_A_OUT_H +#define __ASM_SH_A_OUT_H + +struct exec +{ + unsigned long a_info; /* Use macros N_MAGIC, etc for access */ + unsigned a_text; /* length of text, in bytes */ + unsigned a_data; /* length of data, in bytes */ + unsigned a_bss; /* length of uninitialized data area for file, in bytes */ + unsigned a_syms; /* length of symbol table data in file, in bytes */ + unsigned a_entry; /* start address */ + unsigned a_trsize; /* length of relocation info for text, in bytes */ + unsigned a_drsize; /* length of relocation info for data, in bytes */ +}; + +#define N_TRSIZE(a) ((a).a_trsize) +#define N_DRSIZE(a) ((a).a_drsize) +#define N_SYMSIZE(a) ((a).a_syms) + +#endif /* __ASM_SH_A_OUT_H */ diff --git a/arch/sh/include/asm/adc.h b/arch/sh/include/asm/adc.h new file mode 100644 index 00000000000..48824c1fab8 --- /dev/null +++ b/arch/sh/include/asm/adc.h @@ -0,0 +1,13 @@ +#ifndef __ASM_ADC_H +#define __ASM_ADC_H +#ifdef __KERNEL__ +/* + * Copyright (C) 2004 Andriy Skulysh + */ + +#include + +int adc_single(unsigned int channel); + +#endif /* __KERNEL__ */ +#endif /* __ASM_ADC_H */ diff --git a/arch/sh/include/asm/addrspace.h b/arch/sh/include/asm/addrspace.h new file mode 100644 index 00000000000..2702d81bfc0 --- /dev/null +++ b/arch/sh/include/asm/addrspace.h @@ -0,0 +1,53 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1999 by Kaz Kojima + * + * Defitions for the address spaces of the SH CPUs. + */ +#ifndef __ASM_SH_ADDRSPACE_H +#define __ASM_SH_ADDRSPACE_H + +#ifdef __KERNEL__ + +#include + +/* If this CPU supports segmentation, hook up the helpers */ +#ifdef P1SEG + +/* + [ P0/U0 (virtual) ] 0x00000000 <------ User space + [ P1 (fixed) cached ] 0x80000000 <------ Kernel space + [ P2 (fixed) non-cachable] 0xA0000000 <------ Physical access + [ P3 (virtual) cached] 0xC0000000 <------ vmalloced area + [ P4 control ] 0xE0000000 + */ + +/* Returns the privileged segment base of a given address */ +#define PXSEG(a) (((unsigned long)(a)) & 0xe0000000) + +/* Returns the physical address of a PnSEG (n=1,2) address */ +#define PHYSADDR(a) (((unsigned long)(a)) & 0x1fffffff) + +#ifdef CONFIG_29BIT +/* + * Map an address to a certain privileged segment + */ +#define P1SEGADDR(a) \ + ((__typeof__(a))(((unsigned long)(a) & 0x1fffffff) | P1SEG)) +#define P2SEGADDR(a) \ + ((__typeof__(a))(((unsigned long)(a) & 0x1fffffff) | P2SEG)) +#define P3SEGADDR(a) \ + ((__typeof__(a))(((unsigned long)(a) & 0x1fffffff) | P3SEG)) +#define P4SEGADDR(a) \ + ((__typeof__(a))(((unsigned long)(a) & 0x1fffffff) | P4SEG)) +#endif /* 29BIT */ +#endif /* P1SEG */ + +/* Check if an address can be reached in 29 bits */ +#define IS_29BIT(a) (((unsigned long)(a)) < 0x20000000) + +#endif /* __KERNEL__ */ +#endif /* __ASM_SH_ADDRSPACE_H */ diff --git a/arch/sh/include/asm/atomic-grb.h b/arch/sh/include/asm/atomic-grb.h new file mode 100644 index 00000000000..4c5b7dbfced --- /dev/null +++ b/arch/sh/include/asm/atomic-grb.h @@ -0,0 +1,169 @@ +#ifndef __ASM_SH_ATOMIC_GRB_H +#define __ASM_SH_ATOMIC_GRB_H + +static inline void atomic_add(int i, atomic_t *v) +{ + int tmp; + + __asm__ __volatile__ ( + " .align 2 \n\t" + " mova 1f, r0 \n\t" /* r0 = end point */ + " mov r15, r1 \n\t" /* r1 = saved sp */ + " mov #-6, r15 \n\t" /* LOGIN: r15 = size */ + " mov.l @%1, %0 \n\t" /* load old value */ + " add %2, %0 \n\t" /* add */ + " mov.l %0, @%1 \n\t" /* store new value */ + "1: mov r1, r15 \n\t" /* LOGOUT */ + : "=&r" (tmp), + "+r" (v) + : "r" (i) + : "memory" , "r0", "r1"); +} + +static inline void atomic_sub(int i, atomic_t *v) +{ + int tmp; + + __asm__ __volatile__ ( + " .align 2 \n\t" + " mova 1f, r0 \n\t" /* r0 = end point */ + " mov r15, r1 \n\t" /* r1 = saved sp */ + " mov #-6, r15 \n\t" /* LOGIN: r15 = size */ + " mov.l @%1, %0 \n\t" /* load old value */ + " sub %2, %0 \n\t" /* sub */ + " mov.l %0, @%1 \n\t" /* store new value */ + "1: mov r1, r15 \n\t" /* LOGOUT */ + : "=&r" (tmp), + "+r" (v) + : "r" (i) + : "memory" , "r0", "r1"); +} + +static inline int atomic_add_return(int i, atomic_t *v) +{ + int tmp; + + __asm__ __volatile__ ( + " .align 2 \n\t" + " mova 1f, r0 \n\t" /* r0 = end point */ + " mov r15, r1 \n\t" /* r1 = saved sp */ + " mov #-6, r15 \n\t" /* LOGIN: r15 = size */ + " mov.l @%1, %0 \n\t" /* load old value */ + " add %2, %0 \n\t" /* add */ + " mov.l %0, @%1 \n\t" /* store new value */ + "1: mov r1, r15 \n\t" /* LOGOUT */ + : "=&r" (tmp), + "+r" (v) + : "r" (i) + : "memory" , "r0", "r1"); + + return tmp; +} + +static inline int atomic_sub_return(int i, atomic_t *v) +{ + int tmp; + + __asm__ __volatile__ ( + " .align 2 \n\t" + " mova 1f, r0 \n\t" /* r0 = end point */ + " mov r15, r1 \n\t" /* r1 = saved sp */ + " mov #-6, r15 \n\t" /* LOGIN: r15 = size */ + " mov.l @%1, %0 \n\t" /* load old value */ + " sub %2, %0 \n\t" /* sub */ + " mov.l %0, @%1 \n\t" /* store new value */ + "1: mov r1, r15 \n\t" /* LOGOUT */ + : "=&r" (tmp), + "+r" (v) + : "r" (i) + : "memory", "r0", "r1"); + + return tmp; +} + +static inline void atomic_clear_mask(unsigned int mask, atomic_t *v) +{ + int tmp; + unsigned int _mask = ~mask; + + __asm__ __volatile__ ( + " .align 2 \n\t" + " mova 1f, r0 \n\t" /* r0 = end point */ + " mov r15, r1 \n\t" /* r1 = saved sp */ + " mov #-6, r15 \n\t" /* LOGIN: r15 = size */ + " mov.l @%1, %0 \n\t" /* load old value */ + " and %2, %0 \n\t" /* add */ + " mov.l %0, @%1 \n\t" /* store new value */ + "1: mov r1, r15 \n\t" /* LOGOUT */ + : "=&r" (tmp), + "+r" (v) + : "r" (_mask) + : "memory" , "r0", "r1"); +} + +static inline void atomic_set_mask(unsigned int mask, atomic_t *v) +{ + int tmp; + + __asm__ __volatile__ ( + " .align 2 \n\t" + " mova 1f, r0 \n\t" /* r0 = end point */ + " mov r15, r1 \n\t" /* r1 = saved sp */ + " mov #-6, r15 \n\t" /* LOGIN: r15 = size */ + " mov.l @%1, %0 \n\t" /* load old value */ + " or %2, %0 \n\t" /* or */ + " mov.l %0, @%1 \n\t" /* store new value */ + "1: mov r1, r15 \n\t" /* LOGOUT */ + : "=&r" (tmp), + "+r" (v) + : "r" (mask) + : "memory" , "r0", "r1"); +} + +static inline int atomic_cmpxchg(atomic_t *v, int old, int new) +{ + int ret; + + __asm__ __volatile__ ( + " .align 2 \n\t" + " mova 1f, r0 \n\t" + " nop \n\t" + " mov r15, r1 \n\t" + " mov #-8, r15 \n\t" + " mov.l @%1, %0 \n\t" + " cmp/eq %2, %0 \n\t" + " bf 1f \n\t" + " mov.l %3, @%1 \n\t" + "1: mov r1, r15 \n\t" + : "=&r" (ret) + : "r" (v), "r" (old), "r" (new) + : "memory" , "r0", "r1" , "t"); + + return ret; +} + +static inline int atomic_add_unless(atomic_t *v, int a, int u) +{ + int ret; + unsigned long tmp; + + __asm__ __volatile__ ( + " .align 2 \n\t" + " mova 1f, r0 \n\t" + " nop \n\t" + " mov r15, r1 \n\t" + " mov #-12, r15 \n\t" + " mov.l @%2, %1 \n\t" + " mov %1, %0 \n\t" + " cmp/eq %4, %0 \n\t" + " bt/s 1f \n\t" + " add %3, %1 \n\t" + " mov.l %1, @%2 \n\t" + "1: mov r1, r15 \n\t" + : "=&r" (ret), "=&r" (tmp) + : "r" (v), "r" (a), "r" (u) + : "memory" , "r0", "r1" , "t"); + + return ret != u; +} +#endif /* __ASM_SH_ATOMIC_GRB_H */ diff --git a/arch/sh/include/asm/atomic-irq.h b/arch/sh/include/asm/atomic-irq.h new file mode 100644 index 00000000000..74f7943cff6 --- /dev/null +++ b/arch/sh/include/asm/atomic-irq.h @@ -0,0 +1,71 @@ +#ifndef __ASM_SH_ATOMIC_IRQ_H +#define __ASM_SH_ATOMIC_IRQ_H + +/* + * To get proper branch prediction for the main line, we must branch + * forward to code at the end of this object's .text section, then + * branch back to restart the operation. + */ +static inline void atomic_add(int i, atomic_t *v) +{ + unsigned long flags; + + local_irq_save(flags); + *(long *)v += i; + local_irq_restore(flags); +} + +static inline void atomic_sub(int i, atomic_t *v) +{ + unsigned long flags; + + local_irq_save(flags); + *(long *)v -= i; + local_irq_restore(flags); +} + +static inline int atomic_add_return(int i, atomic_t *v) +{ + unsigned long temp, flags; + + local_irq_save(flags); + temp = *(long *)v; + temp += i; + *(long *)v = temp; + local_irq_restore(flags); + + return temp; +} + +static inline int atomic_sub_return(int i, atomic_t *v) +{ + unsigned long temp, flags; + + local_irq_save(flags); + temp = *(long *)v; + temp -= i; + *(long *)v = temp; + local_irq_restore(flags); + + return temp; +} + +static inline void atomic_clear_mask(unsigned int mask, atomic_t *v) +{ + unsigned long flags; + + local_irq_save(flags); + *(long *)v &= ~mask; + local_irq_restore(flags); +} + +static inline void atomic_set_mask(unsigned int mask, atomic_t *v) +{ + unsigned long flags; + + local_irq_save(flags); + *(long *)v |= mask; + local_irq_restore(flags); +} + +#endif /* __ASM_SH_ATOMIC_IRQ_H */ diff --git a/arch/sh/include/asm/atomic-llsc.h b/arch/sh/include/asm/atomic-llsc.h new file mode 100644 index 00000000000..4b00b78e3f4 --- /dev/null +++ b/arch/sh/include/asm/atomic-llsc.h @@ -0,0 +1,107 @@ +#ifndef __ASM_SH_ATOMIC_LLSC_H +#define __ASM_SH_ATOMIC_LLSC_H + +/* + * To get proper branch prediction for the main line, we must branch + * forward to code at the end of this object's .text section, then + * branch back to restart the operation. + */ +static inline void atomic_add(int i, atomic_t *v) +{ + unsigned long tmp; + + __asm__ __volatile__ ( +"1: movli.l @%2, %0 ! atomic_add \n" +" add %1, %0 \n" +" movco.l %0, @%2 \n" +" bf 1b \n" + : "=&z" (tmp) + : "r" (i), "r" (&v->counter) + : "t"); +} + +static inline void atomic_sub(int i, atomic_t *v) +{ + unsigned long tmp; + + __asm__ __volatile__ ( +"1: movli.l @%2, %0 ! atomic_sub \n" +" sub %1, %0 \n" +" movco.l %0, @%2 \n" +" bf 1b \n" + : "=&z" (tmp) + : "r" (i), "r" (&v->counter) + : "t"); +} + +/* + * SH-4A note: + * + * We basically get atomic_xxx_return() for free compared with + * atomic_xxx(). movli.l/movco.l require r0 due to the instruction + * encoding, so the retval is automatically set without having to + * do any special work. + */ +static inline int atomic_add_return(int i, atomic_t *v) +{ + unsigned long temp; + + __asm__ __volatile__ ( +"1: movli.l @%2, %0 ! atomic_add_return \n" +" add %1, %0 \n" +" movco.l %0, @%2 \n" +" bf 1b \n" +" synco \n" + : "=&z" (temp) + : "r" (i), "r" (&v->counter) + : "t"); + + return temp; +} + +static inline int atomic_sub_return(int i, atomic_t *v) +{ + unsigned long temp; + + __asm__ __volatile__ ( +"1: movli.l @%2, %0 ! atomic_sub_return \n" +" sub %1, %0 \n" +" movco.l %0, @%2 \n" +" bf 1b \n" +" synco \n" + : "=&z" (temp) + : "r" (i), "r" (&v->counter) + : "t"); + + return temp; +} + +static inline void atomic_clear_mask(unsigned int mask, atomic_t *v) +{ + unsigned long tmp; + + __asm__ __volatile__ ( +"1: movli.l @%2, %0 ! atomic_clear_mask \n" +" and %1, %0 \n" +" movco.l %0, @%2 \n" +" bf 1b \n" + : "=&z" (tmp) + : "r" (~mask), "r" (&v->counter) + : "t"); +} + +static inline void atomic_set_mask(unsigned int mask, atomic_t *v) +{ + unsigned long tmp; + + __asm__ __volatile__ ( +"1: movli.l @%2, %0 ! atomic_set_mask \n" +" or %1, %0 \n" +" movco.l %0, @%2 \n" +" bf 1b \n" + : "=&z" (tmp) + : "r" (mask), "r" (&v->counter) + : "t"); +} + +#endif /* __ASM_SH_ATOMIC_LLSC_H */ diff --git a/arch/sh/include/asm/atomic.h b/arch/sh/include/asm/atomic.h new file mode 100644 index 00000000000..c043ef00302 --- /dev/null +++ b/arch/sh/include/asm/atomic.h @@ -0,0 +1,89 @@ +#ifndef __ASM_SH_ATOMIC_H +#define __ASM_SH_ATOMIC_H + +/* + * Atomic operations that C can't guarantee us. Useful for + * resource counting etc.. + * + */ + +typedef struct { volatile int counter; } atomic_t; + +#define ATOMIC_INIT(i) ( (atomic_t) { (i) } ) + +#define atomic_read(v) ((v)->counter) +#define atomic_set(v,i) ((v)->counter = (i)) + +#include +#include + +#if defined(CONFIG_GUSA_RB) +#include +#elif defined(CONFIG_CPU_SH4A) +#include +#else +#include +#endif + +#define atomic_add_negative(a, v) (atomic_add_return((a), (v)) < 0) + +#define atomic_dec_return(v) atomic_sub_return(1,(v)) +#define atomic_inc_return(v) atomic_add_return(1,(v)) + +/* + * atomic_inc_and_test - increment and test + * @v: pointer of type atomic_t + * + * Atomically increments @v by 1 + * and returns true if the result is zero, or false for all + * other cases. + */ +#define atomic_inc_and_test(v) (atomic_inc_return(v) == 0) + +#define atomic_sub_and_test(i,v) (atomic_sub_return((i), (v)) == 0) +#define atomic_dec_and_test(v) (atomic_sub_return(1, (v)) == 0) + +#define atomic_inc(v) atomic_add(1,(v)) +#define atomic_dec(v) atomic_sub(1,(v)) + +#ifndef CONFIG_GUSA_RB +static inline int atomic_cmpxchg(atomic_t *v, int old, int new) +{ + int ret; + unsigned long flags; + + local_irq_save(flags); + ret = v->counter; + if (likely(ret == old)) + v->counter = new; + local_irq_restore(flags); + + return ret; +} + +static inline int atomic_add_unless(atomic_t *v, int a, int u) +{ + int ret; + unsigned long flags; + + local_irq_save(flags); + ret = v->counter; + if (ret != u) + v->counter += a; + local_irq_restore(flags); + + return ret != u; +} +#endif + +#define atomic_xchg(v, new) (xchg(&((v)->counter), new)) +#define atomic_inc_not_zero(v) atomic_add_unless((v), 1, 0) + +/* Atomic operations are already serializing on SH */ +#define smp_mb__before_atomic_dec() barrier() +#define smp_mb__after_atomic_dec() barrier() +#define smp_mb__before_atomic_inc() barrier() +#define smp_mb__after_atomic_inc() barrier() + +#include +#endif /* __ASM_SH_ATOMIC_H */ diff --git a/arch/sh/include/asm/auxvec.h b/arch/sh/include/asm/auxvec.h new file mode 100644 index 00000000000..a6b9d4f4859 --- /dev/null +++ b/arch/sh/include/asm/auxvec.h @@ -0,0 +1,36 @@ +#ifndef __ASM_SH_AUXVEC_H +#define __ASM_SH_AUXVEC_H + +/* + * Architecture-neutral AT_ values in 0-17, leave some room + * for more of them. + */ + +/* + * This entry gives some information about the FPU initialization + * performed by the kernel. + */ +#define AT_FPUCW 18 /* Used FPU control word. */ + +#ifdef CONFIG_VSYSCALL +/* + * Only define this in the vsyscall case, the entry point to + * the vsyscall page gets placed here. The kernel will attempt + * to build a gate VMA we don't care about otherwise.. + */ +#define AT_SYSINFO_EHDR 33 +#endif + +/* + * More complete cache descriptions than AT_[DIU]CACHEBSIZE. If the + * value is -1, then the cache doesn't exist. Otherwise: + * + * bit 0-3: Cache set-associativity; 0 means fully associative. + * bit 4-7: Log2 of cacheline size. + * bit 8-31: Size of the entire cache >> 8. + */ +#define AT_L1I_CACHESHAPE 34 +#define AT_L1D_CACHESHAPE 35 +#define AT_L2_CACHESHAPE 36 + +#endif /* __ASM_SH_AUXVEC_H */ diff --git a/arch/sh/include/asm/bitops-grb.h b/arch/sh/include/asm/bitops-grb.h new file mode 100644 index 00000000000..a5907b94395 --- /dev/null +++ b/arch/sh/include/asm/bitops-grb.h @@ -0,0 +1,169 @@ +#ifndef __ASM_SH_BITOPS_GRB_H +#define __ASM_SH_BITOPS_GRB_H + +static inline void set_bit(int nr, volatile void * addr) +{ + int mask; + volatile unsigned int *a = addr; + unsigned long tmp; + + a += nr >> 5; + mask = 1 << (nr & 0x1f); + + __asm__ __volatile__ ( + " .align 2 \n\t" + " mova 1f, r0 \n\t" /* r0 = end point */ + " mov r15, r1 \n\t" /* r1 = saved sp */ + " mov #-6, r15 \n\t" /* LOGIN: r15 = size */ + " mov.l @%1, %0 \n\t" /* load old value */ + " or %2, %0 \n\t" /* or */ + " mov.l %0, @%1 \n\t" /* store new value */ + "1: mov r1, r15 \n\t" /* LOGOUT */ + : "=&r" (tmp), + "+r" (a) + : "r" (mask) + : "memory" , "r0", "r1"); +} + +static inline void clear_bit(int nr, volatile void * addr) +{ + int mask; + volatile unsigned int *a = addr; + unsigned long tmp; + + a += nr >> 5; + mask = ~(1 << (nr & 0x1f)); + __asm__ __volatile__ ( + " .align 2 \n\t" + " mova 1f, r0 \n\t" /* r0 = end point */ + " mov r15, r1 \n\t" /* r1 = saved sp */ + " mov #-6, r15 \n\t" /* LOGIN: r15 = size */ + " mov.l @%1, %0 \n\t" /* load old value */ + " and %2, %0 \n\t" /* and */ + " mov.l %0, @%1 \n\t" /* store new value */ + "1: mov r1, r15 \n\t" /* LOGOUT */ + : "=&r" (tmp), + "+r" (a) + : "r" (mask) + : "memory" , "r0", "r1"); +} + +static inline void change_bit(int nr, volatile void * addr) +{ + int mask; + volatile unsigned int *a = addr; + unsigned long tmp; + + a += nr >> 5; + mask = 1 << (nr & 0x1f); + __asm__ __volatile__ ( + " .align 2 \n\t" + " mova 1f, r0 \n\t" /* r0 = end point */ + " mov r15, r1 \n\t" /* r1 = saved sp */ + " mov #-6, r15 \n\t" /* LOGIN: r15 = size */ + " mov.l @%1, %0 \n\t" /* load old value */ + " xor %2, %0 \n\t" /* xor */ + " mov.l %0, @%1 \n\t" /* store new value */ + "1: mov r1, r15 \n\t" /* LOGOUT */ + : "=&r" (tmp), + "+r" (a) + : "r" (mask) + : "memory" , "r0", "r1"); +} + +static inline int test_and_set_bit(int nr, volatile void * addr) +{ + int mask, retval; + volatile unsigned int *a = addr; + unsigned long tmp; + + a += nr >> 5; + mask = 1 << (nr & 0x1f); + + __asm__ __volatile__ ( + " .align 2 \n\t" + " mova 1f, r0 \n\t" /* r0 = end point */ + " mov r15, r1 \n\t" /* r1 = saved sp */ + " mov #-14, r15 \n\t" /* LOGIN: r15 = size */ + " mov.l @%2, %0 \n\t" /* load old value */ + " mov %0, %1 \n\t" + " tst %1, %3 \n\t" /* T = ((*a & mask) == 0) */ + " mov #-1, %1 \n\t" /* retvat = -1 */ + " negc %1, %1 \n\t" /* retval = (mask & *a) != 0 */ + " or %3, %0 \n\t" + " mov.l %0, @%2 \n\t" /* store new value */ + "1: mov r1, r15 \n\t" /* LOGOUT */ + : "=&r" (tmp), + "=&r" (retval), + "+r" (a) + : "r" (mask) + : "memory" , "r0", "r1" ,"t"); + + return retval; +} + +static inline int test_and_clear_bit(int nr, volatile void * addr) +{ + int mask, retval,not_mask; + volatile unsigned int *a = addr; + unsigned long tmp; + + a += nr >> 5; + mask = 1 << (nr & 0x1f); + + not_mask = ~mask; + + __asm__ __volatile__ ( + " .align 2 \n\t" + " mova 1f, r0 \n\t" /* r0 = end point */ + " mov r15, r1 \n\t" /* r1 = saved sp */ + " mov #-14, r15 \n\t" /* LOGIN */ + " mov.l @%2, %0 \n\t" /* load old value */ + " mov %0, %1 \n\t" /* %1 = *a */ + " tst %1, %3 \n\t" /* T = ((*a & mask) == 0) */ + " mov #-1, %1 \n\t" /* retvat = -1 */ + " negc %1, %1 \n\t" /* retval = (mask & *a) != 0 */ + " and %4, %0 \n\t" + " mov.l %0, @%2 \n\t" /* store new value */ + "1: mov r1, r15 \n\t" /* LOGOUT */ + : "=&r" (tmp), + "=&r" (retval), + "+r" (a) + : "r" (mask), + "r" (not_mask) + : "memory" , "r0", "r1", "t"); + + return retval; +} + +static inline int test_and_change_bit(int nr, volatile void * addr) +{ + int mask, retval; + volatile unsigned int *a = addr; + unsigned long tmp; + + a += nr >> 5; + mask = 1 << (nr & 0x1f); + + __asm__ __volatile__ ( + " .align 2 \n\t" + " mova 1f, r0 \n\t" /* r0 = end point */ + " mov r15, r1 \n\t" /* r1 = saved sp */ + " mov #-14, r15 \n\t" /* LOGIN */ + " mov.l @%2, %0 \n\t" /* load old value */ + " mov %0, %1 \n\t" /* %1 = *a */ + " tst %1, %3 \n\t" /* T = ((*a & mask) == 0) */ + " mov #-1, %1 \n\t" /* retvat = -1 */ + " negc %1, %1 \n\t" /* retval = (mask & *a) != 0 */ + " xor %3, %0 \n\t" + " mov.l %0, @%2 \n\t" /* store new value */ + "1: mov r1, r15 \n\t" /* LOGOUT */ + : "=&r" (tmp), + "=&r" (retval), + "+r" (a) + : "r" (mask) + : "memory" , "r0", "r1", "t"); + + return retval; +} +#endif /* __ASM_SH_BITOPS_GRB_H */ diff --git a/arch/sh/include/asm/bitops-irq.h b/arch/sh/include/asm/bitops-irq.h new file mode 100644 index 00000000000..653a1275058 --- /dev/null +++ b/arch/sh/include/asm/bitops-irq.h @@ -0,0 +1,91 @@ +#ifndef __ASM_SH_BITOPS_IRQ_H +#define __ASM_SH_BITOPS_IRQ_H + +static inline void set_bit(int nr, volatile void *addr) +{ + int mask; + volatile unsigned int *a = addr; + unsigned long flags; + + a += nr >> 5; + mask = 1 << (nr & 0x1f); + local_irq_save(flags); + *a |= mask; + local_irq_restore(flags); +} + +static inline void clear_bit(int nr, volatile void *addr) +{ + int mask; + volatile unsigned int *a = addr; + unsigned long flags; + + a += nr >> 5; + mask = 1 << (nr & 0x1f); + local_irq_save(flags); + *a &= ~mask; + local_irq_restore(flags); +} + +static inline void change_bit(int nr, volatile void *addr) +{ + int mask; + volatile unsigned int *a = addr; + unsigned long flags; + + a += nr >> 5; + mask = 1 << (nr & 0x1f); + local_irq_save(flags); + *a ^= mask; + local_irq_restore(flags); +} + +static inline int test_and_set_bit(int nr, volatile void *addr) +{ + int mask, retval; + volatile unsigned int *a = addr; + unsigned long flags; + + a += nr >> 5; + mask = 1 << (nr & 0x1f); + local_irq_save(flags); + retval = (mask & *a) != 0; + *a |= mask; + local_irq_restore(flags); + + return retval; +} + +static inline int test_and_clear_bit(int nr, volatile void *addr) +{ + int mask, retval; + volatile unsigned int *a = addr; + unsigned long flags; + + a += nr >> 5; + mask = 1 << (nr & 0x1f); + local_irq_save(flags); + retval = (mask & *a) != 0; + *a &= ~mask; + local_irq_restore(flags); + + return retval; +} + +static inline int test_and_change_bit(int nr, volatile void *addr) +{ + int mask, retval; + volatile unsigned int *a = addr; + unsigned long flags; + + a += nr >> 5; + mask = 1 << (nr & 0x1f); + local_irq_save(flags); + retval = (mask & *a) != 0; + *a ^= mask; + local_irq_restore(flags); + + return retval; +} + +#endif /* __ASM_SH_BITOPS_IRQ_H */ diff --git a/arch/sh/include/asm/bitops.h b/arch/sh/include/asm/bitops.h new file mode 100644 index 00000000000..d7d382f63ee --- /dev/null +++ b/arch/sh/include/asm/bitops.h @@ -0,0 +1,103 @@ +#ifndef __ASM_SH_BITOPS_H +#define __ASM_SH_BITOPS_H + +#ifdef __KERNEL__ + +#ifndef _LINUX_BITOPS_H +#error only can be included directly +#endif + +#include +/* For __swab32 */ +#include + +#ifdef CONFIG_GUSA_RB +#include +#else +#include +#endif + + +/* + * clear_bit() doesn't provide any barrier for the compiler. + */ +#define smp_mb__before_clear_bit() barrier() +#define smp_mb__after_clear_bit() barrier() + +#include + +#ifdef CONFIG_SUPERH32 +static inline unsigned long ffz(unsigned long word) +{ + unsigned long result; + + __asm__("1:\n\t" + "shlr %1\n\t" + "bt/s 1b\n\t" + " add #1, %0" + : "=r" (result), "=r" (word) + : "0" (~0L), "1" (word) + : "t"); + return result; +} + +/** + * __ffs - find first bit in word. + * @word: The word to search + * + * Undefined if no bit exists, so code should check against 0 first. + */ +static inline unsigned long __ffs(unsigned long word) +{ + unsigned long result; + + __asm__("1:\n\t" + "shlr %1\n\t" + "bf/s 1b\n\t" + " add #1, %0" + : "=r" (result), "=r" (word) + : "0" (~0L), "1" (word) + : "t"); + return result; +} +#else +static inline unsigned long ffz(unsigned long word) +{ + unsigned long result, __d2, __d3; + + __asm__("gettr tr0, %2\n\t" + "pta $+32, tr0\n\t" + "andi %1, 1, %3\n\t" + "beq %3, r63, tr0\n\t" + "pta $+4, tr0\n" + "0:\n\t" + "shlri.l %1, 1, %1\n\t" + "addi %0, 1, %0\n\t" + "andi %1, 1, %3\n\t" + "beqi %3, 1, tr0\n" + "1:\n\t" + "ptabs %2, tr0\n\t" + : "=r" (result), "=r" (word), "=r" (__d2), "=r" (__d3) + : "0" (0L), "1" (word)); + + return result; +} + +#include +#endif + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#endif /* __KERNEL__ */ + +#endif /* __ASM_SH_BITOPS_H */ diff --git a/arch/sh/include/asm/bug.h b/arch/sh/include/asm/bug.h new file mode 100644 index 00000000000..c0171804016 --- /dev/null +++ b/arch/sh/include/asm/bug.h @@ -0,0 +1,79 @@ +#ifndef __ASM_SH_BUG_H +#define __ASM_SH_BUG_H + +#define TRAPA_BUG_OPCODE 0xc33e /* trapa #0x3e */ + +#ifdef CONFIG_GENERIC_BUG +#define HAVE_ARCH_BUG +#define HAVE_ARCH_WARN_ON + +/** + * _EMIT_BUG_ENTRY + * %1 - __FILE__ + * %2 - __LINE__ + * %3 - trap type + * %4 - sizeof(struct bug_entry) + * + * The trapa opcode itself sits in %0. + * The %O notation is used to avoid # generation. + * + * The offending file and line are encoded in the __bug_table section. + */ +#ifdef CONFIG_DEBUG_BUGVERBOSE +#define _EMIT_BUG_ENTRY \ + "\t.pushsection __bug_table,\"a\"\n" \ + "2:\t.long 1b, %O1\n" \ + "\t.short %O2, %O3\n" \ + "\t.org 2b+%O4\n" \ + "\t.popsection\n" +#else +#define _EMIT_BUG_ENTRY \ + "\t.pushsection __bug_table,\"a\"\n" \ + "2:\t.long 1b\n" \ + "\t.short %O3\n" \ + "\t.org 2b+%O4\n" \ + "\t.popsection\n" +#endif + +#define BUG() \ +do { \ + __asm__ __volatile__ ( \ + "1:\t.short %O0\n" \ + _EMIT_BUG_ENTRY \ + : \ + : "n" (TRAPA_BUG_OPCODE), \ + "i" (__FILE__), \ + "i" (__LINE__), "i" (0), \ + "i" (sizeof(struct bug_entry))); \ +} while (0) + +#define __WARN() \ +do { \ + __asm__ __volatile__ ( \ + "1:\t.short %O0\n" \ + _EMIT_BUG_ENTRY \ + : \ + : "n" (TRAPA_BUG_OPCODE), \ + "i" (__FILE__), \ + "i" (__LINE__), \ + "i" (BUGFLAG_WARNING), \ + "i" (sizeof(struct bug_entry))); \ +} while (0) + +#define WARN_ON(x) ({ \ + int __ret_warn_on = !!(x); \ + if (__builtin_constant_p(__ret_warn_on)) { \ + if (__ret_warn_on) \ + __WARN(); \ + } else { \ + if (unlikely(__ret_warn_on)) \ + __WARN(); \ + } \ + unlikely(__ret_warn_on); \ +}) + +#endif /* CONFIG_GENERIC_BUG */ + +#include + +#endif /* __ASM_SH_BUG_H */ diff --git a/arch/sh/include/asm/bugs.h b/arch/sh/include/asm/bugs.h new file mode 100644 index 00000000000..121b2ecddfc --- /dev/null +++ b/arch/sh/include/asm/bugs.h @@ -0,0 +1,73 @@ +#ifndef __ASM_SH_BUGS_H +#define __ASM_SH_BUGS_H + +/* + * This is included by init/main.c to check for architecture-dependent bugs. + * + * Needs: + * void check_bugs(void); + */ + +/* + * I don't know of any Super-H bugs yet. + */ + +#include + +static void __init check_bugs(void) +{ + extern unsigned long loops_per_jiffy; + char *p = &init_utsname()->machine[2]; /* "sh" */ + + current_cpu_data.loops_per_jiffy = loops_per_jiffy; + + switch (current_cpu_data.type) { + case CPU_SH7619: + *p++ = '2'; + break; + case CPU_SH7203 ... CPU_MXG: + *p++ = '2'; + *p++ = 'a'; + break; + case CPU_SH7705 ... CPU_SH7729: + *p++ = '3'; + break; + case CPU_SH7750 ... CPU_SH4_501: + *p++ = '4'; + break; + case CPU_SH7763 ... CPU_SHX3: + *p++ = '4'; + *p++ = 'a'; + break; + case CPU_SH7343 ... CPU_SH7366: + *p++ = '4'; + *p++ = 'a'; + *p++ = 'l'; + *p++ = '-'; + *p++ = 'd'; + *p++ = 's'; + *p++ = 'p'; + break; + case CPU_SH5_101 ... CPU_SH5_103: + *p++ = '6'; + *p++ = '4'; + break; + case CPU_SH_NONE: + /* + * Specifically use CPU_SH_NONE rather than default:, + * so we're able to have the compiler whine about + * unhandled enumerations. + */ + break; + } + + printk("CPU: %s\n", get_cpu_subtype(¤t_cpu_data)); + +#ifndef __LITTLE_ENDIAN__ + /* 'eb' means 'Endian Big' */ + *p++ = 'e'; + *p++ = 'b'; +#endif + *p = '\0'; +} +#endif /* __ASM_SH_BUGS_H */ diff --git a/arch/sh/include/asm/byteorder.h b/arch/sh/include/asm/byteorder.h new file mode 100644 index 00000000000..4c13e611756 --- /dev/null +++ b/arch/sh/include/asm/byteorder.h @@ -0,0 +1,70 @@ +#ifndef __ASM_SH_BYTEORDER_H +#define __ASM_SH_BYTEORDER_H + +/* + * Copyright (C) 1999 Niibe Yutaka + * Copyright (C) 2000, 2001 Paolo Alberelli + */ +#include +#include + +static inline __attribute_const__ __u32 ___arch__swab32(__u32 x) +{ + __asm__( +#ifdef __SH5__ + "byterev %0, %0\n\t" + "shari %0, 32, %0" +#else + "swap.b %0, %0\n\t" + "swap.w %0, %0\n\t" + "swap.b %0, %0" +#endif + : "=r" (x) + : "0" (x)); + + return x; +} + +static inline __attribute_const__ __u16 ___arch__swab16(__u16 x) +{ + __asm__( +#ifdef __SH5__ + "byterev %0, %0\n\t" + "shari %0, 32, %0" +#else + "swap.b %0, %0" +#endif + : "=r" (x) + : "0" (x)); + + return x; +} + +static inline __u64 ___arch__swab64(__u64 val) +{ + union { + struct { __u32 a,b; } s; + __u64 u; + } v, w; + v.u = val; + w.s.b = ___arch__swab32(v.s.a); + w.s.a = ___arch__swab32(v.s.b); + return w.u; +} + +#define __arch__swab64(x) ___arch__swab64(x) +#define __arch__swab32(x) ___arch__swab32(x) +#define __arch__swab16(x) ___arch__swab16(x) + +#if !defined(__STRICT_ANSI__) || defined(__KERNEL__) +# define __BYTEORDER_HAS_U64__ +# define __SWAB_64_THRU_32__ +#endif + +#ifdef __LITTLE_ENDIAN__ +#include +#else +#include +#endif + +#endif /* __ASM_SH_BYTEORDER_H */ diff --git a/arch/sh/include/asm/cache.h b/arch/sh/include/asm/cache.h new file mode 100644 index 00000000000..02df18ea960 --- /dev/null +++ b/arch/sh/include/asm/cache.h @@ -0,0 +1,51 @@ +/* $Id: cache.h,v 1.6 2004/03/11 18:08:05 lethal Exp $ + * + * include/asm-sh/cache.h + * + * Copyright 1999 (C) Niibe Yutaka + * Copyright 2002, 2003 (C) Paul Mundt + */ +#ifndef __ASM_SH_CACHE_H +#define __ASM_SH_CACHE_H +#ifdef __KERNEL__ + +#include +#include + +#define L1_CACHE_BYTES (1 << L1_CACHE_SHIFT) + +#define __read_mostly __attribute__((__section__(".data.read_mostly"))) + +#ifndef __ASSEMBLY__ +struct cache_info { + unsigned int ways; /* Number of cache ways */ + unsigned int sets; /* Number of cache sets */ + unsigned int linesz; /* Cache line size (bytes) */ + + unsigned int way_size; /* sets * line size */ + + /* + * way_incr is the address offset for accessing the next way + * in memory mapped cache array ops. + */ + unsigned int way_incr; + unsigned int entry_shift; + unsigned int entry_mask; + + /* + * Compute a mask which selects the address bits which overlap between + * 1. those used to select the cache set during indexing + * 2. those in the physical page number. + */ + unsigned int alias_mask; + + unsigned int n_aliases; /* Number of aliases */ + + unsigned long flags; +}; + +int __init detect_cpu_and_cache_system(void); + +#endif /* __ASSEMBLY__ */ +#endif /* __KERNEL__ */ +#endif /* __ASM_SH_CACHE_H */ diff --git a/arch/sh/include/asm/cacheflush.h b/arch/sh/include/asm/cacheflush.h new file mode 100644 index 00000000000..09acbc32d6c --- /dev/null +++ b/arch/sh/include/asm/cacheflush.h @@ -0,0 +1,81 @@ +#ifndef __ASM_SH_CACHEFLUSH_H +#define __ASM_SH_CACHEFLUSH_H + +#ifdef __KERNEL__ + +#ifdef CONFIG_CACHE_OFF +/* + * Nothing to do when the cache is disabled, initial flush and explicit + * disabling is handled at CPU init time. + * + * See arch/sh/kernel/cpu/init.c:cache_init(). + */ +#define p3_cache_init() do { } while (0) +#define flush_cache_all() do { } while (0) +#define flush_cache_mm(mm) do { } while (0) +#define flush_cache_dup_mm(mm) do { } while (0) +#define flush_cache_range(vma, start, end) do { } while (0) +#define flush_cache_page(vma, vmaddr, pfn) do { } while (0) +#define flush_dcache_page(page) do { } while (0) +#define flush_icache_range(start, end) do { } while (0) +#define flush_icache_page(vma,pg) do { } while (0) +#define flush_dcache_mmap_lock(mapping) do { } while (0) +#define flush_dcache_mmap_unlock(mapping) do { } while (0) +#define flush_cache_sigtramp(vaddr) do { } while (0) +#define flush_icache_user_range(vma,pg,adr,len) do { } while (0) +#define __flush_wback_region(start, size) do { (void)(start); } while (0) +#define __flush_purge_region(start, size) do { (void)(start); } while (0) +#define __flush_invalidate_region(start, size) do { (void)(start); } while (0) +#else +#include + +/* + * Consistent DMA requires that the __flush_xxx() primitives must be set + * for any of the enabled non-coherent caches (most of the UP CPUs), + * regardless of PIPT or VIPT cache configurations. + */ + +/* Flush (write-back only) a region (smaller than a page) */ +extern void __flush_wback_region(void *start, int size); +/* Flush (write-back & invalidate) a region (smaller than a page) */ +extern void __flush_purge_region(void *start, int size); +/* Flush (invalidate only) a region (smaller than a page) */ +extern void __flush_invalidate_region(void *start, int size); +#endif + +#define ARCH_HAS_FLUSH_KERNEL_DCACHE_PAGE +static inline void flush_kernel_dcache_page(struct page *page) +{ + flush_dcache_page(page); +} + +#if defined(CONFIG_CPU_SH4) && !defined(CONFIG_CACHE_OFF) +extern void copy_to_user_page(struct vm_area_struct *vma, + struct page *page, unsigned long vaddr, void *dst, const void *src, + unsigned long len); + +extern void copy_from_user_page(struct vm_area_struct *vma, + struct page *page, unsigned long vaddr, void *dst, const void *src, + unsigned long len); +#else +#define copy_to_user_page(vma, page, vaddr, dst, src, len) \ + do { \ + flush_cache_page(vma, vaddr, page_to_pfn(page));\ + memcpy(dst, src, len); \ + flush_icache_user_range(vma, page, vaddr, len); \ + } while (0) + +#define copy_from_user_page(vma, page, vaddr, dst, src, len) \ + do { \ + flush_cache_page(vma, vaddr, page_to_pfn(page));\ + memcpy(dst, src, len); \ + } while (0) +#endif + +#define flush_cache_vmap(start, end) flush_cache_all() +#define flush_cache_vunmap(start, end) flush_cache_all() + +#define HAVE_ARCH_UNMAPPED_AREA + +#endif /* __KERNEL__ */ +#endif /* __ASM_SH_CACHEFLUSH_H */ diff --git a/arch/sh/include/asm/checksum.h b/arch/sh/include/asm/checksum.h new file mode 100644 index 00000000000..67496ab0ef0 --- /dev/null +++ b/arch/sh/include/asm/checksum.h @@ -0,0 +1,5 @@ +#ifdef CONFIG_SUPERH32 +# include "checksum_32.h" +#else +# include "checksum_64.h" +#endif diff --git a/arch/sh/include/asm/checksum_32.h b/arch/sh/include/asm/checksum_32.h new file mode 100644 index 00000000000..14b7ac2f0a0 --- /dev/null +++ b/arch/sh/include/asm/checksum_32.h @@ -0,0 +1,215 @@ +#ifndef __ASM_SH_CHECKSUM_H +#define __ASM_SH_CHECKSUM_H + +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1999 by Kaz Kojima & Niibe Yutaka + */ + +#include + +/* + * computes the checksum of a memory block at buff, length len, + * and adds in "sum" (32-bit) + * + * returns a 32-bit number suitable for feeding into itself + * or csum_tcpudp_magic + * + * this function must be called with even lengths, except + * for the last fragment, which may be odd + * + * it's best to have buff aligned on a 32-bit boundary + */ +asmlinkage __wsum csum_partial(const void *buff, int len, __wsum sum); + +/* + * the same as csum_partial, but copies from src while it + * checksums, and handles user-space pointer exceptions correctly, when needed. + * + * here even more important to align src and dst on a 32-bit (or even + * better 64-bit) boundary + */ + +asmlinkage __wsum csum_partial_copy_generic(const void *src, void *dst, + int len, __wsum sum, + int *src_err_ptr, int *dst_err_ptr); + +/* + * Note: when you get a NULL pointer exception here this means someone + * passed in an incorrect kernel address to one of these functions. + * + * If you use these functions directly please don't forget the + * access_ok(). + */ +static inline +__wsum csum_partial_copy_nocheck(const void *src, void *dst, + int len, __wsum sum) +{ + return csum_partial_copy_generic(src, dst, len, sum, NULL, NULL); +} + +static inline +__wsum csum_partial_copy_from_user(const void __user *src, void *dst, + int len, __wsum sum, int *err_ptr) +{ + return csum_partial_copy_generic((__force const void *)src, dst, + len, sum, err_ptr, NULL); +} + +/* + * Fold a partial checksum + */ + +static inline __sum16 csum_fold(__wsum sum) +{ + unsigned int __dummy; + __asm__("swap.w %0, %1\n\t" + "extu.w %0, %0\n\t" + "extu.w %1, %1\n\t" + "add %1, %0\n\t" + "swap.w %0, %1\n\t" + "add %1, %0\n\t" + "not %0, %0\n\t" + : "=r" (sum), "=&r" (__dummy) + : "0" (sum) + : "t"); + return (__force __sum16)sum; +} + +/* + * This is a version of ip_compute_csum() optimized for IP headers, + * which always checksum on 4 octet boundaries. + * + * i386 version by Jorge Cwik , adapted + * for linux by * Arnt Gulbrandsen. + */ +static inline __sum16 ip_fast_csum(const void *iph, unsigned int ihl) +{ + unsigned int sum, __dummy0, __dummy1; + + __asm__ __volatile__( + "mov.l @%1+, %0\n\t" + "mov.l @%1+, %3\n\t" + "add #-2, %2\n\t" + "clrt\n\t" + "1:\t" + "addc %3, %0\n\t" + "movt %4\n\t" + "mov.l @%1+, %3\n\t" + "dt %2\n\t" + "bf/s 1b\n\t" + " cmp/eq #1, %4\n\t" + "addc %3, %0\n\t" + "addc %2, %0" /* Here %2 is 0, add carry-bit */ + /* Since the input registers which are loaded with iph and ihl + are modified, we must also specify them as outputs, or gcc + will assume they contain their original values. */ + : "=r" (sum), "=r" (iph), "=r" (ihl), "=&r" (__dummy0), "=&z" (__dummy1) + : "1" (iph), "2" (ihl) + : "t", "memory"); + + return csum_fold(sum); +} + +static inline __wsum csum_tcpudp_nofold(__be32 saddr, __be32 daddr, + unsigned short len, + unsigned short proto, + __wsum sum) +{ +#ifdef __LITTLE_ENDIAN__ + unsigned long len_proto = (proto + len) << 8; +#else + unsigned long len_proto = proto + len; +#endif + __asm__("clrt\n\t" + "addc %0, %1\n\t" + "addc %2, %1\n\t" + "addc %3, %1\n\t" + "movt %0\n\t" + "add %1, %0" + : "=r" (sum), "=r" (len_proto) + : "r" (daddr), "r" (saddr), "1" (len_proto), "0" (sum) + : "t"); + + return sum; +} + +/* + * computes the checksum of the TCP/UDP pseudo-header + * returns a 16-bit checksum, already complemented + */ +static inline __sum16 csum_tcpudp_magic(__be32 saddr, __be32 daddr, + unsigned short len, + unsigned short proto, + __wsum sum) +{ + return csum_fold(csum_tcpudp_nofold(saddr, daddr, len, proto, sum)); +} + +/* + * this routine is used for miscellaneous IP-like checksums, mainly + * in icmp.c + */ +static inline __sum16 ip_compute_csum(const void *buff, int len) +{ + return csum_fold(csum_partial(buff, len, 0)); +} + +#define _HAVE_ARCH_IPV6_CSUM +static inline __sum16 csum_ipv6_magic(const struct in6_addr *saddr, + const struct in6_addr *daddr, + __u32 len, unsigned short proto, + __wsum sum) +{ + unsigned int __dummy; + __asm__("clrt\n\t" + "mov.l @(0,%2), %1\n\t" + "addc %1, %0\n\t" + "mov.l @(4,%2), %1\n\t" + "addc %1, %0\n\t" + "mov.l @(8,%2), %1\n\t" + "addc %1, %0\n\t" + "mov.l @(12,%2), %1\n\t" + "addc %1, %0\n\t" + "mov.l @(0,%3), %1\n\t" + "addc %1, %0\n\t" + "mov.l @(4,%3), %1\n\t" + "addc %1, %0\n\t" + "mov.l @(8,%3), %1\n\t" + "addc %1, %0\n\t" + "mov.l @(12,%3), %1\n\t" + "addc %1, %0\n\t" + "addc %4, %0\n\t" + "addc %5, %0\n\t" + "movt %1\n\t" + "add %1, %0\n" + : "=r" (sum), "=&r" (__dummy) + : "r" (saddr), "r" (daddr), + "r" (htonl(len)), "r" (htonl(proto)), "0" (sum) + : "t"); + + return csum_fold(sum); +} + +/* + * Copy and checksum to user + */ +#define HAVE_CSUM_COPY_USER +static inline __wsum csum_and_copy_to_user(const void *src, + void __user *dst, + int len, __wsum sum, + int *err_ptr) +{ + if (access_ok(VERIFY_WRITE, dst, len)) + return csum_partial_copy_generic((__force const void *)src, + dst, len, sum, NULL, err_ptr); + + if (len) + *err_ptr = -EFAULT; + + return (__force __wsum)-1; /* invalid checksum */ +} +#endif /* __ASM_SH_CHECKSUM_H */ diff --git a/arch/sh/include/asm/checksum_64.h b/arch/sh/include/asm/checksum_64.h new file mode 100644 index 00000000000..9c62a031a8f --- /dev/null +++ b/arch/sh/include/asm/checksum_64.h @@ -0,0 +1,78 @@ +#ifndef __ASM_SH_CHECKSUM_64_H +#define __ASM_SH_CHECKSUM_64_H + +/* + * include/asm-sh/checksum_64.h + * + * Copyright (C) 2000, 2001 Paolo Alberelli + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +/* + * computes the checksum of a memory block at buff, length len, + * and adds in "sum" (32-bit) + * + * returns a 32-bit number suitable for feeding into itself + * or csum_tcpudp_magic + * + * this function must be called with even lengths, except + * for the last fragment, which may be odd + * + * it's best to have buff aligned on a 32-bit boundary + */ +asmlinkage __wsum csum_partial(const void *buff, int len, __wsum sum); + +/* + * Note: when you get a NULL pointer exception here this means someone + * passed in an incorrect kernel address to one of these functions. + * + * If you use these functions directly please don't forget the + * access_ok(). + */ + + +__wsum csum_partial_copy_nocheck(const void *src, void *dst, int len, + __wsum sum); + +__wsum csum_partial_copy_from_user(const void __user *src, void *dst, + int len, __wsum sum, int *err_ptr); + +static inline __sum16 csum_fold(__wsum csum) +{ + u32 sum = (__force u32)csum; + sum = (sum & 0xffff) + (sum >> 16); + sum = (sum & 0xffff) + (sum >> 16); + return (__force __sum16)~sum; +} + +__sum16 ip_fast_csum(const void *iph, unsigned int ihl); + +__wsum csum_tcpudp_nofold(__be32 saddr, __be32 daddr, + unsigned short len, unsigned short proto, + __wsum sum); + +/* + * computes the checksum of the TCP/UDP pseudo-header + * returns a 16-bit checksum, already complemented + */ +static inline __sum16 csum_tcpudp_magic(__be32 saddr, __be32 daddr, + unsigned short len, + unsigned short proto, + __wsum sum) +{ + return csum_fold(csum_tcpudp_nofold(saddr,daddr,len,proto,sum)); +} + +/* + * this routine is used for miscellaneous IP-like checksums, mainly + * in icmp.c + */ +static inline __sum16 ip_compute_csum(const void *buff, int len) +{ + return csum_fold(csum_partial(buff, len, 0)); +} + +#endif /* __ASM_SH_CHECKSUM_64_H */ diff --git a/arch/sh/include/asm/clock.h b/arch/sh/include/asm/clock.h new file mode 100644 index 00000000000..720dfab7b15 --- /dev/null +++ b/arch/sh/include/asm/clock.h @@ -0,0 +1,97 @@ +#ifndef __ASM_SH_CLOCK_H +#define __ASM_SH_CLOCK_H + +#include +#include +#include +#include +#include + +struct clk; + +struct clk_ops { + void (*init)(struct clk *clk); + void (*enable)(struct clk *clk); + void (*disable)(struct clk *clk); + void (*recalc)(struct clk *clk); + int (*set_rate)(struct clk *clk, unsigned long rate, int algo_id); + long (*round_rate)(struct clk *clk, unsigned long rate); +}; + +struct clk { + struct list_head node; + const char *name; + int id; + struct module *owner; + + struct clk *parent; + struct clk_ops *ops; + + struct kref kref; + + unsigned long rate; + unsigned long flags; + unsigned long arch_flags; +}; + +#define CLK_ALWAYS_ENABLED (1 << 0) +#define CLK_RATE_PROPAGATES (1 << 1) + +/* Should be defined by processor-specific code */ +void arch_init_clk_ops(struct clk_ops **, int type); + +/* arch/sh/kernel/cpu/clock.c */ +int clk_init(void); + +void clk_recalc_rate(struct clk *); + +int clk_register(struct clk *); +void clk_unregister(struct clk *); + +static inline int clk_always_enable(const char *id) +{ + struct clk *clk; + int ret; + + clk = clk_get(NULL, id); + if (IS_ERR(clk)) + return PTR_ERR(clk); + + ret = clk_enable(clk); + if (ret) + clk_put(clk); + + return ret; +} + +/* the exported API, in addition to clk_set_rate */ +/** + * clk_set_rate_ex - set the clock rate for a clock source, with additional parameter + * @clk: clock source + * @rate: desired clock rate in Hz + * @algo_id: algorithm id to be passed down to ops->set_rate + * + * Returns success (0) or negative errno. + */ +int clk_set_rate_ex(struct clk *clk, unsigned long rate, int algo_id); + +enum clk_sh_algo_id { + NO_CHANGE = 0, + + IUS_N1_N1, + IUS_322, + IUS_522, + IUS_N11, + + SB_N1, + + SB3_N1, + SB3_32, + SB3_43, + SB3_54, + + BP_N1, + + IP_N1, +}; +#endif /* __ASM_SH_CLOCK_H */ diff --git a/arch/sh/include/asm/cmpxchg-grb.h b/arch/sh/include/asm/cmpxchg-grb.h new file mode 100644 index 00000000000..e2681abe764 --- /dev/null +++ b/arch/sh/include/asm/cmpxchg-grb.h @@ -0,0 +1,70 @@ +#ifndef __ASM_SH_CMPXCHG_GRB_H +#define __ASM_SH_CMPXCHG_GRB_H + +static inline unsigned long xchg_u32(volatile u32 *m, unsigned long val) +{ + unsigned long retval; + + __asm__ __volatile__ ( + " .align 2 \n\t" + " mova 1f, r0 \n\t" /* r0 = end point */ + " nop \n\t" + " mov r15, r1 \n\t" /* r1 = saved sp */ + " mov #-4, r15 \n\t" /* LOGIN */ + " mov.l @%1, %0 \n\t" /* load old value */ + " mov.l %2, @%1 \n\t" /* store new value */ + "1: mov r1, r15 \n\t" /* LOGOUT */ + : "=&r" (retval), + "+r" (m) + : "r" (val) + : "memory", "r0", "r1"); + + return retval; +} + +static inline unsigned long xchg_u8(volatile u8 *m, unsigned long val) +{ + unsigned long retval; + + __asm__ __volatile__ ( + " .align 2 \n\t" + " mova 1f, r0 \n\t" /* r0 = end point */ + " mov r15, r1 \n\t" /* r1 = saved sp */ + " mov #-6, r15 \n\t" /* LOGIN */ + " mov.b @%1, %0 \n\t" /* load old value */ + " extu.b %0, %0 \n\t" /* extend as unsigned */ + " mov.b %2, @%1 \n\t" /* store new value */ + "1: mov r1, r15 \n\t" /* LOGOUT */ + : "=&r" (retval), + "+r" (m) + : "r" (val) + : "memory" , "r0", "r1"); + + return retval; +} + +static inline unsigned long __cmpxchg_u32(volatile int *m, unsigned long old, + unsigned long new) +{ + unsigned long retval; + + __asm__ __volatile__ ( + " .align 2 \n\t" + " mova 1f, r0 \n\t" /* r0 = end point */ + " nop \n\t" + " mov r15, r1 \n\t" /* r1 = saved sp */ + " mov #-8, r15 \n\t" /* LOGIN */ + " mov.l @%1, %0 \n\t" /* load old value */ + " cmp/eq %0, %2 \n\t" + " bf 1f \n\t" /* if not equal */ + " mov.l %2, @%1 \n\t" /* store new value */ + "1: mov r1, r15 \n\t" /* LOGOUT */ + : "=&r" (retval), + "+r" (m) + : "r" (new) + : "memory" , "r0", "r1", "t"); + + return retval; +} + +#endif /* __ASM_SH_CMPXCHG_GRB_H */ diff --git a/arch/sh/include/asm/cmpxchg-irq.h b/arch/sh/include/asm/cmpxchg-irq.h new file mode 100644 index 00000000000..43049ec0554 --- /dev/null +++ b/arch/sh/include/asm/cmpxchg-irq.h @@ -0,0 +1,40 @@ +#ifndef __ASM_SH_CMPXCHG_IRQ_H +#define __ASM_SH_CMPXCHG_IRQ_H + +static inline unsigned long xchg_u32(volatile u32 *m, unsigned long val) +{ + unsigned long flags, retval; + + local_irq_save(flags); + retval = *m; + *m = val; + local_irq_restore(flags); + return retval; +} + +static inline unsigned long xchg_u8(volatile u8 *m, unsigned long val) +{ + unsigned long flags, retval; + + local_irq_save(flags); + retval = *m; + *m = val & 0xff; + local_irq_restore(flags); + return retval; +} + +static inline unsigned long __cmpxchg_u32(volatile int *m, unsigned long old, + unsigned long new) +{ + __u32 retval; + unsigned long flags; + + local_irq_save(flags); + retval = *m; + if (retval == old) + *m = new; + local_irq_restore(flags); /* implies memory barrier */ + return retval; +} + +#endif /* __ASM_SH_CMPXCHG_IRQ_H */ diff --git a/arch/sh/include/asm/cpu-features.h b/arch/sh/include/asm/cpu-features.h new file mode 100644 index 00000000000..86308aa3973 --- /dev/null +++ b/arch/sh/include/asm/cpu-features.h @@ -0,0 +1,25 @@ +#ifndef __ASM_SH_CPU_FEATURES_H +#define __ASM_SH_CPU_FEATURES_H + +/* + * Processor flags + * + * Note: When adding a new flag, keep cpu_flags[] in + * arch/sh/kernel/setup.c in sync so symbolic name + * mapping of the processor flags has a chance of being + * reasonably accurate. + * + * These flags are also available through the ELF + * auxiliary vector as AT_HWCAP. + */ +#define CPU_HAS_FPU 0x0001 /* Hardware FPU support */ +#define CPU_HAS_P2_FLUSH_BUG 0x0002 /* Need to flush the cache in P2 area */ +#define CPU_HAS_MMU_PAGE_ASSOC 0x0004 /* SH3: TLB way selection bit support */ +#define CPU_HAS_DSP 0x0008 /* SH-DSP: DSP support */ +#define CPU_HAS_PERF_COUNTER 0x0010 /* Hardware performance counters */ +#define CPU_HAS_PTEA 0x0020 /* PTEA register */ +#define CPU_HAS_LLSC 0x0040 /* movli.l/movco.l */ +#define CPU_HAS_L2_CACHE 0x0080 /* Secondary cache / URAM */ +#define CPU_HAS_OP32 0x0100 /* 32-bit instruction support */ + +#endif /* __ASM_SH_CPU_FEATURES_H */ diff --git a/arch/sh/include/asm/cputime.h b/arch/sh/include/asm/cputime.h new file mode 100644 index 00000000000..6ca395d1393 --- /dev/null +++ b/arch/sh/include/asm/cputime.h @@ -0,0 +1,6 @@ +#ifndef __SH_CPUTIME_H +#define __SH_CPUTIME_H + +#include + +#endif /* __SH_CPUTIME_H */ diff --git a/arch/sh/include/asm/current.h b/arch/sh/include/asm/current.h new file mode 100644 index 00000000000..62b63880b33 --- /dev/null +++ b/arch/sh/include/asm/current.h @@ -0,0 +1,20 @@ +#ifndef __ASM_SH_CURRENT_H +#define __ASM_SH_CURRENT_H + +/* + * Copyright (C) 1999 Niibe Yutaka + * + */ + +#include + +struct task_struct; + +static __inline__ struct task_struct * get_current(void) +{ + return current_thread_info()->task; +} + +#define current get_current() + +#endif /* __ASM_SH_CURRENT_H */ diff --git a/arch/sh/include/asm/delay.h b/arch/sh/include/asm/delay.h new file mode 100644 index 00000000000..4b16bf9b56b --- /dev/null +++ b/arch/sh/include/asm/delay.h @@ -0,0 +1,26 @@ +#ifndef __ASM_SH_DELAY_H +#define __ASM_SH_DELAY_H + +/* + * Copyright (C) 1993 Linus Torvalds + * + * Delay routines calling functions in arch/sh/lib/delay.c + */ + +extern void __bad_udelay(void); +extern void __bad_ndelay(void); + +extern void __udelay(unsigned long usecs); +extern void __ndelay(unsigned long nsecs); +extern void __const_udelay(unsigned long xloops); +extern void __delay(unsigned long loops); + +#define udelay(n) (__builtin_constant_p(n) ? \ + ((n) > 20000 ? __bad_udelay() : __const_udelay((n) * 0x10c6ul)) : \ + __udelay(n)) + +#define ndelay(n) (__builtin_constant_p(n) ? \ + ((n) > 20000 ? __bad_ndelay() : __const_udelay((n) * 5ul)) : \ + __ndelay(n)) + +#endif /* __ASM_SH_DELAY_H */ diff --git a/arch/sh/include/asm/device.h b/arch/sh/include/asm/device.h new file mode 100644 index 00000000000..efd511d0803 --- /dev/null +++ b/arch/sh/include/asm/device.h @@ -0,0 +1,12 @@ +/* + * Arch specific extensions to struct device + * + * This file is released under the GPLv2 + */ +#include + +struct platform_device; +/* allocate contiguous memory chunk and fill in struct resource */ +int platform_resource_setup_memory(struct platform_device *pdev, + char *name, unsigned long memsize); + diff --git a/arch/sh/include/asm/div64.h b/arch/sh/include/asm/div64.h new file mode 100644 index 00000000000..6cd978cefb2 --- /dev/null +++ b/arch/sh/include/asm/div64.h @@ -0,0 +1 @@ +#include diff --git a/arch/sh/include/asm/dma-mapping.h b/arch/sh/include/asm/dma-mapping.h new file mode 100644 index 00000000000..6c0b8a2de14 --- /dev/null +++ b/arch/sh/include/asm/dma-mapping.h @@ -0,0 +1,192 @@ +#ifndef __ASM_SH_DMA_MAPPING_H +#define __ASM_SH_DMA_MAPPING_H + +#include +#include +#include +#include + +extern struct bus_type pci_bus_type; + +#define dma_supported(dev, mask) (1) + +static inline int dma_set_mask(struct device *dev, u64 mask) +{ + if (!dev->dma_mask || !dma_supported(dev, mask)) + return -EIO; + + *dev->dma_mask = mask; + + return 0; +} + +void *dma_alloc_coherent(struct device *dev, size_t size, + dma_addr_t *dma_handle, gfp_t flag); + +void dma_free_coherent(struct device *dev, size_t size, + void *vaddr, dma_addr_t dma_handle); + +void dma_cache_sync(struct device *dev, void *vaddr, size_t size, + enum dma_data_direction dir); + +#define dma_alloc_noncoherent(d, s, h, f) dma_alloc_coherent(d, s, h, f) +#define dma_free_noncoherent(d, s, v, h) dma_free_coherent(d, s, v, h) +#define dma_is_consistent(d, h) (1) + +static inline dma_addr_t dma_map_single(struct device *dev, + void *ptr, size_t size, + enum dma_data_direction dir) +{ +#if defined(CONFIG_PCI) && !defined(CONFIG_SH_PCIDMA_NONCOHERENT) + if (dev->bus == &pci_bus_type) + return virt_to_phys(ptr); +#endif + dma_cache_sync(dev, ptr, size, dir); + + return virt_to_phys(ptr); +} + +#define dma_unmap_single(dev, addr, size, dir) do { } while (0) + +static inline int dma_map_sg(struct device *dev, struct scatterlist *sg, + int nents, enum dma_data_direction dir) +{ + int i; + + for (i = 0; i < nents; i++) { +#if !defined(CONFIG_PCI) || defined(CONFIG_SH_PCIDMA_NONCOHERENT) + dma_cache_sync(dev, sg_virt(&sg[i]), sg[i].length, dir); +#endif + sg[i].dma_address = sg_phys(&sg[i]); + } + + return nents; +} + +#define dma_unmap_sg(dev, sg, nents, dir) do { } while (0) + +static inline dma_addr_t dma_map_page(struct device *dev, struct page *page, + unsigned long offset, size_t size, + enum dma_data_direction dir) +{ + return dma_map_single(dev, page_address(page) + offset, size, dir); +} + +static inline void dma_unmap_page(struct device *dev, dma_addr_t dma_address, + size_t size, enum dma_data_direction dir) +{ + dma_unmap_single(dev, dma_address, size, dir); +} + +static inline void dma_sync_single(struct device *dev, dma_addr_t dma_handle, + size_t size, enum dma_data_direction dir) +{ +#if defined(CONFIG_PCI) && !defined(CONFIG_SH_PCIDMA_NONCOHERENT) + if (dev->bus == &pci_bus_type) + return; +#endif + dma_cache_sync(dev, phys_to_virt(dma_handle), size, dir); +} + +static inline void dma_sync_single_range(struct device *dev, + dma_addr_t dma_handle, + unsigned long offset, size_t size, + enum dma_data_direction dir) +{ +#if defined(CONFIG_PCI) && !defined(CONFIG_SH_PCIDMA_NONCOHERENT) + if (dev->bus == &pci_bus_type) + return; +#endif + dma_cache_sync(dev, phys_to_virt(dma_handle) + offset, size, dir); +} + +static inline void dma_sync_sg(struct device *dev, struct scatterlist *sg, + int nelems, enum dma_data_direction dir) +{ + int i; + + for (i = 0; i < nelems; i++) { +#if !defined(CONFIG_PCI) || defined(CONFIG_SH_PCIDMA_NONCOHERENT) + dma_cache_sync(dev, sg_virt(&sg[i]), sg[i].length, dir); +#endif + sg[i].dma_address = sg_phys(&sg[i]); + } +} + +static inline void dma_sync_single_for_cpu(struct device *dev, + dma_addr_t dma_handle, size_t size, + enum dma_data_direction dir) +{ + dma_sync_single(dev, dma_handle, size, dir); +} + +static inline void dma_sync_single_for_device(struct device *dev, + dma_addr_t dma_handle, + size_t size, + enum dma_data_direction dir) +{ + dma_sync_single(dev, dma_handle, size, dir); +} + +static inline void dma_sync_single_range_for_cpu(struct device *dev, + dma_addr_t dma_handle, + unsigned long offset, + size_t size, + enum dma_data_direction direction) +{ + dma_sync_single_for_cpu(dev, dma_handle+offset, size, direction); +} + +static inline void dma_sync_single_range_for_device(struct device *dev, + dma_addr_t dma_handle, + unsigned long offset, + size_t size, + enum dma_data_direction direction) +{ + dma_sync_single_for_device(dev, dma_handle+offset, size, direction); +} + + +static inline void dma_sync_sg_for_cpu(struct device *dev, + struct scatterlist *sg, int nelems, + enum dma_data_direction dir) +{ + dma_sync_sg(dev, sg, nelems, dir); +} + +static inline void dma_sync_sg_for_device(struct device *dev, + struct scatterlist *sg, int nelems, + enum dma_data_direction dir) +{ + dma_sync_sg(dev, sg, nelems, dir); +} + + +static inline int dma_get_cache_alignment(void) +{ + /* + * Each processor family will define its own L1_CACHE_SHIFT, + * L1_CACHE_BYTES wraps to this, so this is always safe. + */ + return L1_CACHE_BYTES; +} + +static inline int dma_mapping_error(struct device *dev, dma_addr_t dma_addr) +{ + return dma_addr == 0; +} + +#define ARCH_HAS_DMA_DECLARE_COHERENT_MEMORY + +extern int +dma_declare_coherent_memory(struct device *dev, dma_addr_t bus_addr, + dma_addr_t device_addr, size_t size, int flags); + +extern void +dma_release_declared_memory(struct device *dev); + +extern void * +dma_mark_declared_memory_occupied(struct device *dev, + dma_addr_t device_addr, size_t size); + +#endif /* __ASM_SH_DMA_MAPPING_H */ diff --git a/arch/sh/include/asm/dma.h b/arch/sh/include/asm/dma.h new file mode 100644 index 00000000000..beca7128e2a --- /dev/null +++ b/arch/sh/include/asm/dma.h @@ -0,0 +1,166 @@ +/* + * include/asm-sh/dma.h + * + * Copyright (C) 2003, 2004 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#ifndef __ASM_SH_DMA_H +#define __ASM_SH_DMA_H +#ifdef __KERNEL__ + +#include +#include +#include +#include +#include + +/* The maximum address that we can perform a DMA transfer to on this platform */ +/* Don't define MAX_DMA_ADDRESS; it's useless on the SuperH and any + occurrence should be flagged as an error. */ +/* But... */ +/* XXX: This is not applicable to SuperH, just needed for alloc_bootmem */ +#define MAX_DMA_ADDRESS (PAGE_OFFSET+0x10000000) + +#ifdef CONFIG_NR_DMA_CHANNELS +# define MAX_DMA_CHANNELS (CONFIG_NR_DMA_CHANNELS) +#else +# define MAX_DMA_CHANNELS (CONFIG_NR_ONCHIP_DMA_CHANNELS) +#endif + +/* + * Read and write modes can mean drastically different things depending on the + * channel configuration. Consult your DMAC documentation and module + * implementation for further clues. + */ +#define DMA_MODE_READ 0x00 +#define DMA_MODE_WRITE 0x01 +#define DMA_MODE_MASK 0x01 + +#define DMA_AUTOINIT 0x10 + +/* + * DMAC (dma_info) flags + */ +enum { + DMAC_CHANNELS_CONFIGURED = 0x01, + DMAC_CHANNELS_TEI_CAPABLE = 0x02, /* Transfer end interrupt */ +}; + +/* + * DMA channel capabilities / flags + */ +enum { + DMA_CONFIGURED = 0x01, + + /* + * Transfer end interrupt, inherited from DMAC. + * wait_queue used in dma_wait_for_completion. + */ + DMA_TEI_CAPABLE = 0x02, +}; + +extern spinlock_t dma_spin_lock; + +struct dma_channel; + +struct dma_ops { + int (*request)(struct dma_channel *chan); + void (*free)(struct dma_channel *chan); + + int (*get_residue)(struct dma_channel *chan); + int (*xfer)(struct dma_channel *chan); + int (*configure)(struct dma_channel *chan, unsigned long flags); + int (*extend)(struct dma_channel *chan, unsigned long op, void *param); +}; + +struct dma_channel { + char dev_id[16]; /* unique name per DMAC of channel */ + + unsigned int chan; /* DMAC channel number */ + unsigned int vchan; /* Virtual channel number */ + + unsigned int mode; + unsigned int count; + + unsigned long sar; + unsigned long dar; + + const char **caps; + + unsigned long flags; + atomic_t busy; + + wait_queue_head_t wait_queue; + + struct sys_device dev; + void *priv_data; +}; + +struct dma_info { + struct platform_device *pdev; + + const char *name; + unsigned int nr_channels; + unsigned long flags; + + struct dma_ops *ops; + struct dma_channel *channels; + + struct list_head list; + int first_channel_nr; + int first_vchannel_nr; +}; + +struct dma_chan_caps { + int ch_num; + const char **caplist; +}; + +#define to_dma_channel(channel) container_of(channel, struct dma_channel, dev) + +/* arch/sh/drivers/dma/dma-api.c */ +extern int dma_xfer(unsigned int chan, unsigned long from, + unsigned long to, size_t size, unsigned int mode); + +#define dma_write(chan, from, to, size) \ + dma_xfer(chan, from, to, size, DMA_MODE_WRITE) +#define dma_write_page(chan, from, to) \ + dma_write(chan, from, to, PAGE_SIZE) + +#define dma_read(chan, from, to, size) \ + dma_xfer(chan, from, to, size, DMA_MODE_READ) +#define dma_read_page(chan, from, to) \ + dma_read(chan, from, to, PAGE_SIZE) + +extern int request_dma_bycap(const char **dmac, const char **caps, + const char *dev_id); +extern int request_dma(unsigned int chan, const char *dev_id); +extern void free_dma(unsigned int chan); +extern int get_dma_residue(unsigned int chan); +extern struct dma_info *get_dma_info(unsigned int chan); +extern struct dma_channel *get_dma_channel(unsigned int chan); +extern void dma_wait_for_completion(unsigned int chan); +extern void dma_configure_channel(unsigned int chan, unsigned long flags); + +extern int register_dmac(struct dma_info *info); +extern void unregister_dmac(struct dma_info *info); +extern struct dma_info *get_dma_info_by_name(const char *dmac_name); + +extern int dma_extend(unsigned int chan, unsigned long op, void *param); +extern int register_chan_caps(const char *dmac, struct dma_chan_caps *capslist); + +/* arch/sh/drivers/dma/dma-sysfs.c */ +extern int dma_create_sysfs_files(struct dma_channel *, struct dma_info *); +extern void dma_remove_sysfs_files(struct dma_channel *, struct dma_info *); + +#ifdef CONFIG_PCI +extern int isa_dma_bridge_buggy; +#else +#define isa_dma_bridge_buggy (0) +#endif + +#endif /* __KERNEL__ */ +#endif /* __ASM_SH_DMA_H */ diff --git a/arch/sh/include/asm/dmabrg.h b/arch/sh/include/asm/dmabrg.h new file mode 100644 index 00000000000..c5edba216cf --- /dev/null +++ b/arch/sh/include/asm/dmabrg.h @@ -0,0 +1,23 @@ +/* + * SH7760 DMABRG (USB/Audio) support + */ + +#ifndef _DMABRG_H_ +#define _DMABRG_H_ + +/* IRQ sources */ +#define DMABRGIRQ_USBDMA 0 +#define DMABRGIRQ_USBDMAERR 1 +#define DMABRGIRQ_A0TXF 2 +#define DMABRGIRQ_A0TXH 3 +#define DMABRGIRQ_A0RXF 4 +#define DMABRGIRQ_A0RXH 5 +#define DMABRGIRQ_A1TXF 6 +#define DMABRGIRQ_A1TXH 7 +#define DMABRGIRQ_A1RXF 8 +#define DMABRGIRQ_A1RXH 9 + +extern int dmabrg_request_irq(unsigned int, void(*)(void *), void *); +extern void dmabrg_free_irq(unsigned int); + +#endif diff --git a/arch/sh/include/asm/edosk7705.h b/arch/sh/include/asm/edosk7705.h new file mode 100644 index 00000000000..5bdc9d9be3d --- /dev/null +++ b/arch/sh/include/asm/edosk7705.h @@ -0,0 +1,30 @@ +/* + * include/asm-sh/edosk7705.h + * + * Modified version of io_se.h for the EDOSK7705 specific functions. + * + * May be copied or modified under the terms of the GNU General Public + * License. See linux/COPYING for more information. + * + * IO functions for an Hitachi EDOSK7705 development board + */ + +#ifndef __ASM_SH_EDOSK7705_IO_H +#define __ASM_SH_EDOSK7705_IO_H + +#include + +extern unsigned char sh_edosk7705_inb(unsigned long port); +extern unsigned int sh_edosk7705_inl(unsigned long port); + +extern void sh_edosk7705_outb(unsigned char value, unsigned long port); +extern void sh_edosk7705_outl(unsigned int value, unsigned long port); + +extern void sh_edosk7705_insb(unsigned long port, void *addr, unsigned long count); +extern void sh_edosk7705_insl(unsigned long port, void *addr, unsigned long count); +extern void sh_edosk7705_outsb(unsigned long port, const void *addr, unsigned long count); +extern void sh_edosk7705_outsl(unsigned long port, const void *addr, unsigned long count); + +extern unsigned long sh_edosk7705_isa_port2addr(unsigned long offset); + +#endif /* __ASM_SH_EDOSK7705_IO_H */ diff --git a/arch/sh/include/asm/elf.h b/arch/sh/include/asm/elf.h new file mode 100644 index 00000000000..f01449a8d37 --- /dev/null +++ b/arch/sh/include/asm/elf.h @@ -0,0 +1,244 @@ +#ifndef __ASM_SH_ELF_H +#define __ASM_SH_ELF_H + +#include +#include +#include +#include + +/* ELF header e_flags defines */ +#define EF_SH_PIC 0x100 /* -fpic */ +#define EF_SH_FDPIC 0x8000 /* -mfdpic */ + +/* SH (particularly SHcompact) relocation types */ +#define R_SH_NONE 0 +#define R_SH_DIR32 1 +#define R_SH_REL32 2 +#define R_SH_DIR8WPN 3 +#define R_SH_IND12W 4 +#define R_SH_DIR8WPL 5 +#define R_SH_DIR8WPZ 6 +#define R_SH_DIR8BP 7 +#define R_SH_DIR8W 8 +#define R_SH_DIR8L 9 +#define R_SH_SWITCH16 25 +#define R_SH_SWITCH32 26 +#define R_SH_USES 27 +#define R_SH_COUNT 28 +#define R_SH_ALIGN 29 +#define R_SH_CODE 30 +#define R_SH_DATA 31 +#define R_SH_LABEL 32 +#define R_SH_SWITCH8 33 +#define R_SH_GNU_VTINHERIT 34 +#define R_SH_GNU_VTENTRY 35 +#define R_SH_TLS_GD_32 144 +#define R_SH_TLS_LD_32 145 +#define R_SH_TLS_LDO_32 146 +#define R_SH_TLS_IE_32 147 +#define R_SH_TLS_LE_32 148 +#define R_SH_TLS_DTPMOD32 149 +#define R_SH_TLS_DTPOFF32 150 +#define R_SH_TLS_TPOFF32 151 +#define R_SH_GOT32 160 +#define R_SH_PLT32 161 +#define R_SH_COPY 162 +#define R_SH_GLOB_DAT 163 +#define R_SH_JMP_SLOT 164 +#define R_SH_RELATIVE 165 +#define R_SH_GOTOFF 166 +#define R_SH_GOTPC 167 + +/* FDPIC relocs */ +#define R_SH_GOT20 70 +#define R_SH_GOTOFF20 71 +#define R_SH_GOTFUNCDESC 72 +#define R_SH_GOTFUNCDESC20 73 +#define R_SH_GOTOFFFUNCDESC 74 +#define R_SH_GOTOFFFUNCDESC20 75 +#define R_SH_FUNCDESC 76 +#define R_SH_FUNCDESC_VALUE 77 + +#if 0 /* XXX - later .. */ +#define R_SH_GOT20 198 +#define R_SH_GOTOFF20 199 +#define R_SH_GOTFUNCDESC 200 +#define R_SH_GOTFUNCDESC20 201 +#define R_SH_GOTOFFFUNCDESC 202 +#define R_SH_GOTOFFFUNCDESC20 203 +#define R_SH_FUNCDESC 204 +#define R_SH_FUNCDESC_VALUE 205 +#endif + +/* SHmedia relocs */ +#define R_SH_IMM_LOW16 246 +#define R_SH_IMM_LOW16_PCREL 247 +#define R_SH_IMM_MEDLOW16 248 +#define R_SH_IMM_MEDLOW16_PCREL 249 +/* Keep this the last entry. */ +#define R_SH_NUM 256 + +/* + * ELF register definitions.. + */ + +typedef unsigned long elf_greg_t; + +#define ELF_NGREG (sizeof (struct pt_regs) / sizeof(elf_greg_t)) +typedef elf_greg_t elf_gregset_t[ELF_NGREG]; + +typedef struct user_fpu_struct elf_fpregset_t; + +/* + * These are used to set parameters in the core dumps. + */ +#define ELF_CLASS ELFCLASS32 +#ifdef __LITTLE_ENDIAN__ +#define ELF_DATA ELFDATA2LSB +#else +#define ELF_DATA ELFDATA2MSB +#endif +#define ELF_ARCH EM_SH + +#ifdef __KERNEL__ +/* + * This is used to ensure we don't load something for the wrong architecture. + */ +#define elf_check_arch(x) ((x)->e_machine == EM_SH) +#define elf_check_fdpic(x) ((x)->e_flags & EF_SH_FDPIC) +#define elf_check_const_displacement(x) ((x)->e_flags & EF_SH_PIC) + +#define USE_ELF_CORE_DUMP +#define ELF_FDPIC_CORE_EFLAGS EF_SH_FDPIC +#define ELF_EXEC_PAGESIZE PAGE_SIZE + +/* This is the location that an ET_DYN program is loaded if exec'ed. Typical + use of this is to invoke "./ld.so someprog" to test out a new version of + the loader. We need to make sure that it is out of the way of the program + that it will "exec", and that there is sufficient room for the brk. */ + +#define ELF_ET_DYN_BASE (2 * TASK_SIZE / 3) + +#define ELF_CORE_COPY_REGS(_dest,_regs) \ + memcpy((char *) &_dest, (char *) _regs, \ + sizeof(struct pt_regs)); + +/* This yields a mask that user programs can use to figure out what + instruction set this CPU supports. This could be done in user space, + but it's not easy, and we've already done it here. */ + +#define ELF_HWCAP (boot_cpu_data.flags) + +/* This yields a string that ld.so will use to load implementation + specific libraries for optimization. This is more specific in + intent than poking at uname or /proc/cpuinfo. + + For the moment, we have only optimizations for the Intel generations, + but that could change... */ + +#define ELF_PLATFORM (utsname()->machine) + +#ifdef __SH5__ +#define ELF_PLAT_INIT(_r, load_addr) \ + do { _r->regs[0]=0; _r->regs[1]=0; _r->regs[2]=0; _r->regs[3]=0; \ + _r->regs[4]=0; _r->regs[5]=0; _r->regs[6]=0; _r->regs[7]=0; \ + _r->regs[8]=0; _r->regs[9]=0; _r->regs[10]=0; _r->regs[11]=0; \ + _r->regs[12]=0; _r->regs[13]=0; _r->regs[14]=0; _r->regs[15]=0; \ + _r->regs[16]=0; _r->regs[17]=0; _r->regs[18]=0; _r->regs[19]=0; \ + _r->regs[20]=0; _r->regs[21]=0; _r->regs[22]=0; _r->regs[23]=0; \ + _r->regs[24]=0; _r->regs[25]=0; _r->regs[26]=0; _r->regs[27]=0; \ + _r->regs[28]=0; _r->regs[29]=0; _r->regs[30]=0; _r->regs[31]=0; \ + _r->regs[32]=0; _r->regs[33]=0; _r->regs[34]=0; _r->regs[35]=0; \ + _r->regs[36]=0; _r->regs[37]=0; _r->regs[38]=0; _r->regs[39]=0; \ + _r->regs[40]=0; _r->regs[41]=0; _r->regs[42]=0; _r->regs[43]=0; \ + _r->regs[44]=0; _r->regs[45]=0; _r->regs[46]=0; _r->regs[47]=0; \ + _r->regs[48]=0; _r->regs[49]=0; _r->regs[50]=0; _r->regs[51]=0; \ + _r->regs[52]=0; _r->regs[53]=0; _r->regs[54]=0; _r->regs[55]=0; \ + _r->regs[56]=0; _r->regs[57]=0; _r->regs[58]=0; _r->regs[59]=0; \ + _r->regs[60]=0; _r->regs[61]=0; _r->regs[62]=0; \ + _r->tregs[0]=0; _r->tregs[1]=0; _r->tregs[2]=0; _r->tregs[3]=0; \ + _r->tregs[4]=0; _r->tregs[5]=0; _r->tregs[6]=0; _r->tregs[7]=0; \ + _r->sr = SR_FD | SR_MMU; } while (0) +#else +#define ELF_PLAT_INIT(_r, load_addr) \ + do { _r->regs[0]=0; _r->regs[1]=0; _r->regs[2]=0; _r->regs[3]=0; \ + _r->regs[4]=0; _r->regs[5]=0; _r->regs[6]=0; _r->regs[7]=0; \ + _r->regs[8]=0; _r->regs[9]=0; _r->regs[10]=0; _r->regs[11]=0; \ + _r->regs[12]=0; _r->regs[13]=0; _r->regs[14]=0; \ + _r->sr = SR_FD; } while (0) + +#define ELF_FDPIC_PLAT_INIT(_r, _exec_map_addr, _interp_map_addr, \ + _dynamic_addr) \ +do { \ + _r->regs[0] = 0; \ + _r->regs[1] = 0; \ + _r->regs[2] = 0; \ + _r->regs[3] = 0; \ + _r->regs[4] = 0; \ + _r->regs[5] = 0; \ + _r->regs[6] = 0; \ + _r->regs[7] = 0; \ + _r->regs[8] = _exec_map_addr; \ + _r->regs[9] = _interp_map_addr; \ + _r->regs[10] = _dynamic_addr; \ + _r->regs[11] = 0; \ + _r->regs[12] = 0; \ + _r->regs[13] = 0; \ + _r->regs[14] = 0; \ + _r->sr = SR_FD; \ +} while (0) +#endif + +#define SET_PERSONALITY(ex, ibcs2) set_personality(PER_LINUX_32BIT) +struct task_struct; +extern int dump_task_regs (struct task_struct *, elf_gregset_t *); +extern int dump_task_fpu (struct task_struct *, elf_fpregset_t *); + +#define ELF_CORE_COPY_TASK_REGS(tsk, elf_regs) dump_task_regs(tsk, elf_regs) +#define ELF_CORE_COPY_FPREGS(tsk, elf_fpregs) dump_task_fpu(tsk, elf_fpregs) + +#ifdef CONFIG_VSYSCALL +/* vDSO has arch_setup_additional_pages */ +#define ARCH_HAS_SETUP_ADDITIONAL_PAGES +struct linux_binprm; +extern int arch_setup_additional_pages(struct linux_binprm *bprm, + int executable_stack); + +extern unsigned int vdso_enabled; +extern void __kernel_vsyscall; + +#define VDSO_BASE ((unsigned long)current->mm->context.vdso) +#define VDSO_SYM(x) (VDSO_BASE + (unsigned long)(x)) + +#define VSYSCALL_AUX_ENT \ + if (vdso_enabled) \ + NEW_AUX_ENT(AT_SYSINFO_EHDR, VDSO_BASE); +#else +#define VSYSCALL_AUX_ENT +#endif /* CONFIG_VSYSCALL */ + +#ifdef CONFIG_SH_FPU +#define FPU_AUX_ENT NEW_AUX_ENT(AT_FPUCW, FPSCR_INIT) +#else +#define FPU_AUX_ENT +#endif + +extern int l1i_cache_shape, l1d_cache_shape, l2_cache_shape; + +/* update AT_VECTOR_SIZE_ARCH if the number of NEW_AUX_ENT entries changes */ +#define ARCH_DLINFO \ +do { \ + /* Optional FPU initialization */ \ + FPU_AUX_ENT; \ + \ + /* Optional vsyscall entry */ \ + VSYSCALL_AUX_ENT; \ + \ + /* Cache desc */ \ + NEW_AUX_ENT(AT_L1I_CACHESHAPE, l1i_cache_shape); \ + NEW_AUX_ENT(AT_L1D_CACHESHAPE, l1d_cache_shape); \ + NEW_AUX_ENT(AT_L2_CACHESHAPE, l2_cache_shape); \ +} while (0) + +#endif /* __KERNEL__ */ +#endif /* __ASM_SH_ELF_H */ diff --git a/arch/sh/include/asm/emergency-restart.h b/arch/sh/include/asm/emergency-restart.h new file mode 100644 index 00000000000..108d8c48e42 --- /dev/null +++ b/arch/sh/include/asm/emergency-restart.h @@ -0,0 +1,6 @@ +#ifndef _ASM_EMERGENCY_RESTART_H +#define _ASM_EMERGENCY_RESTART_H + +#include + +#endif /* _ASM_EMERGENCY_RESTART_H */ diff --git a/arch/sh/include/asm/entry-macros.S b/arch/sh/include/asm/entry-macros.S new file mode 100644 index 00000000000..2dab0b8d945 --- /dev/null +++ b/arch/sh/include/asm/entry-macros.S @@ -0,0 +1,33 @@ +! entry.S macro define + + .macro cli + stc sr, r0 + or #0xf0, r0 + ldc r0, sr + .endm + + .macro sti + mov #0xf0, r11 + extu.b r11, r11 + not r11, r11 + stc sr, r10 + and r11, r10 +#ifdef CONFIG_CPU_HAS_SR_RB + stc k_g_imask, r11 + or r11, r10 +#endif + ldc r10, sr + .endm + + .macro get_current_thread_info, ti, tmp +#ifdef CONFIG_CPU_HAS_SR_RB + stc r7_bank, \ti +#else + mov #((THREAD_SIZE - 1) >> 10) ^ 0xff, \tmp + shll8 \tmp + shll2 \tmp + mov r15, \ti + and \tmp, \ti +#endif + .endm + diff --git a/arch/sh/include/asm/errno.h b/arch/sh/include/asm/errno.h new file mode 100644 index 00000000000..51cf6f9cebb --- /dev/null +++ b/arch/sh/include/asm/errno.h @@ -0,0 +1,6 @@ +#ifndef __ASM_SH_ERRNO_H +#define __ASM_SH_ERRNO_H + +#include + +#endif /* __ASM_SH_ERRNO_H */ diff --git a/arch/sh/include/asm/fb.h b/arch/sh/include/asm/fb.h new file mode 100644 index 00000000000..d92e99cd8c8 --- /dev/null +++ b/arch/sh/include/asm/fb.h @@ -0,0 +1,19 @@ +#ifndef _ASM_FB_H_ +#define _ASM_FB_H_ + +#include +#include +#include + +static inline void fb_pgprotect(struct file *file, struct vm_area_struct *vma, + unsigned long off) +{ + vma->vm_page_prot = pgprot_writecombine(vma->vm_page_prot); +} + +static inline int fb_is_primary_device(struct fb_info *info) +{ + return 0; +} + +#endif /* _ASM_FB_H_ */ diff --git a/arch/sh/include/asm/fcntl.h b/arch/sh/include/asm/fcntl.h new file mode 100644 index 00000000000..46ab12db573 --- /dev/null +++ b/arch/sh/include/asm/fcntl.h @@ -0,0 +1 @@ +#include diff --git a/arch/sh/include/asm/fixmap.h b/arch/sh/include/asm/fixmap.h new file mode 100644 index 00000000000..721fcc4d5e9 --- /dev/null +++ b/arch/sh/include/asm/fixmap.h @@ -0,0 +1,117 @@ +/* + * fixmap.h: compile-time virtual memory allocation + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1998 Ingo Molnar + * + * Support of BIGMEM added by Gerhard Wichert, Siemens AG, July 1999 + */ + +#ifndef _ASM_FIXMAP_H +#define _ASM_FIXMAP_H + +#include +#include +#ifdef CONFIG_HIGHMEM +#include +#include +#endif + +/* + * Here we define all the compile-time 'special' virtual + * addresses. The point is to have a constant address at + * compile time, but to set the physical address only + * in the boot process. We allocate these special addresses + * from the end of P3 backwards. + * Also this lets us do fail-safe vmalloc(), we + * can guarantee that these special addresses and + * vmalloc()-ed addresses never overlap. + * + * these 'compile-time allocated' memory buffers are + * fixed-size 4k pages. (or larger if used with an increment + * highger than 1) use fixmap_set(idx,phys) to associate + * physical memory with fixmap indices. + * + * TLB entries of such buffers will not be flushed across + * task switches. + */ + +/* + * on UP currently we will have no trace of the fixmap mechanizm, + * no page table allocations, etc. This might change in the + * future, say framebuffers for the console driver(s) could be + * fix-mapped? + */ +enum fixed_addresses { +#define FIX_N_COLOURS 16 + FIX_CMAP_BEGIN, + FIX_CMAP_END = FIX_CMAP_BEGIN + FIX_N_COLOURS, + FIX_UNCACHED, +#ifdef CONFIG_HIGHMEM + FIX_KMAP_BEGIN, /* reserved pte's for temporary kernel mappings */ + FIX_KMAP_END = FIX_KMAP_BEGIN+(KM_TYPE_NR*NR_CPUS)-1, +#endif + __end_of_fixed_addresses +}; + +extern void __set_fixmap(enum fixed_addresses idx, + unsigned long phys, pgprot_t flags); + +#define set_fixmap(idx, phys) \ + __set_fixmap(idx, phys, PAGE_KERNEL) +/* + * Some hardware wants to get fixmapped without caching. + */ +#define set_fixmap_nocache(idx, phys) \ + __set_fixmap(idx, phys, PAGE_KERNEL_NOCACHE) +/* + * used by vmalloc.c. + * + * Leave one empty page between vmalloc'ed areas and + * the start of the fixmap, and leave one page empty + * at the top of mem.. + */ +#ifdef CONFIG_SUPERH32 +#define FIXADDR_TOP (P4SEG - PAGE_SIZE) +#else +#define FIXADDR_TOP (0xff000000 - PAGE_SIZE) +#endif +#define FIXADDR_SIZE (__end_of_fixed_addresses << PAGE_SHIFT) +#define FIXADDR_START (FIXADDR_TOP - FIXADDR_SIZE) + +#define __fix_to_virt(x) (FIXADDR_TOP - ((x) << PAGE_SHIFT)) +#define __virt_to_fix(x) ((FIXADDR_TOP - ((x)&PAGE_MASK)) >> PAGE_SHIFT) + +extern void __this_fixmap_does_not_exist(void); + +/* + * 'index to address' translation. If anyone tries to use the idx + * directly without tranlation, we catch the bug with a NULL-deference + * kernel oops. Illegal ranges of incoming indices are caught too. + */ +static inline unsigned long fix_to_virt(const unsigned int idx) +{ + /* + * this branch gets completely eliminated after inlining, + * except when someone tries to use fixaddr indices in an + * illegal way. (such as mixing up address types or using + * out-of-range indices). + * + * If it doesn't get removed, the linker will complain + * loudly with a reasonably clear error message.. + */ + if (idx >= __end_of_fixed_addresses) + __this_fixmap_does_not_exist(); + + return __fix_to_virt(idx); +} + +static inline unsigned long virt_to_fix(const unsigned long vaddr) +{ + BUG_ON(vaddr >= FIXADDR_TOP || vaddr < FIXADDR_START); + return __virt_to_fix(vaddr); +} +#endif diff --git a/arch/sh/include/asm/flat.h b/arch/sh/include/asm/flat.h new file mode 100644 index 00000000000..0cc800299e0 --- /dev/null +++ b/arch/sh/include/asm/flat.h @@ -0,0 +1,24 @@ +/* + * include/asm-sh/flat.h + * + * uClinux flat-format executables + * + * Copyright (C) 2003 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive for + * more details. + */ +#ifndef __ASM_SH_FLAT_H +#define __ASM_SH_FLAT_H + +#define flat_stack_align(sp) /* nothing needed */ +#define flat_argvp_envp_on_stack() 0 +#define flat_old_ram_flag(flags) (flags) +#define flat_reloc_valid(reloc, size) ((reloc) <= (size)) +#define flat_get_addr_from_rp(rp, relval, flags, p) get_unaligned(rp) +#define flat_put_addr_at_rp(rp, val, relval) put_unaligned(val,rp) +#define flat_get_relocate_addr(rel) (rel) +#define flat_set_persistent(relval, p) ({ (void)p; 0; }) + +#endif /* __ASM_SH_FLAT_H */ diff --git a/arch/sh/include/asm/fpu.h b/arch/sh/include/asm/fpu.h new file mode 100644 index 00000000000..91462fea150 --- /dev/null +++ b/arch/sh/include/asm/fpu.h @@ -0,0 +1,55 @@ +#ifndef __ASM_SH_FPU_H +#define __ASM_SH_FPU_H + +#ifndef __ASSEMBLY__ +#include +#include + +#ifdef CONFIG_SH_FPU +static inline void release_fpu(struct pt_regs *regs) +{ + regs->sr |= SR_FD; +} + +static inline void grab_fpu(struct pt_regs *regs) +{ + regs->sr &= ~SR_FD; +} + +struct task_struct; + +extern void save_fpu(struct task_struct *__tsk, struct pt_regs *regs); +#else + +#define release_fpu(regs) do { } while (0) +#define grab_fpu(regs) do { } while (0) + +static inline void save_fpu(struct task_struct *tsk, struct pt_regs *regs) +{ + clear_tsk_thread_flag(tsk, TIF_USEDFPU); +} +#endif + +extern int do_fpu_inst(unsigned short, struct pt_regs *); + +static inline void unlazy_fpu(struct task_struct *tsk, struct pt_regs *regs) +{ + preempt_disable(); + if (test_tsk_thread_flag(tsk, TIF_USEDFPU)) + save_fpu(tsk, regs); + preempt_enable(); +} + +static inline void clear_fpu(struct task_struct *tsk, struct pt_regs *regs) +{ + preempt_disable(); + if (test_tsk_thread_flag(tsk, TIF_USEDFPU)) { + clear_tsk_thread_flag(tsk, TIF_USEDFPU); + release_fpu(regs); + } + preempt_enable(); +} + +#endif /* __ASSEMBLY__ */ + +#endif /* __ASM_SH_FPU_H */ diff --git a/arch/sh/include/asm/freq.h b/arch/sh/include/asm/freq.h new file mode 100644 index 00000000000..4ece90b09b9 --- /dev/null +++ b/arch/sh/include/asm/freq.h @@ -0,0 +1,18 @@ +/* + * include/asm-sh/freq.h + * + * Copyright (C) 2002, 2003 Paul Mundt + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ +#ifndef __ASM_SH_FREQ_H +#define __ASM_SH_FREQ_H +#ifdef __KERNEL__ + +#include + +#endif /* __KERNEL__ */ +#endif /* __ASM_SH_FREQ_H */ diff --git a/arch/sh/include/asm/futex-irq.h b/arch/sh/include/asm/futex-irq.h new file mode 100644 index 00000000000..a9f16a7f9ae --- /dev/null +++ b/arch/sh/include/asm/futex-irq.h @@ -0,0 +1,111 @@ +#ifndef __ASM_SH_FUTEX_IRQ_H +#define __ASM_SH_FUTEX_IRQ_H + +#include + +static inline int atomic_futex_op_xchg_set(int oparg, int __user *uaddr, + int *oldval) +{ + unsigned long flags; + int ret; + + local_irq_save(flags); + + ret = get_user(*oldval, uaddr); + if (!ret) + ret = put_user(oparg, uaddr); + + local_irq_restore(flags); + + return ret; +} + +static inline int atomic_futex_op_xchg_add(int oparg, int __user *uaddr, + int *oldval) +{ + unsigned long flags; + int ret; + + local_irq_save(flags); + + ret = get_user(*oldval, uaddr); + if (!ret) + ret = put_user(*oldval + oparg, uaddr); + + local_irq_restore(flags); + + return ret; +} + +static inline int atomic_futex_op_xchg_or(int oparg, int __user *uaddr, + int *oldval) +{ + unsigned long flags; + int ret; + + local_irq_save(flags); + + ret = get_user(*oldval, uaddr); + if (!ret) + ret = put_user(*oldval | oparg, uaddr); + + local_irq_restore(flags); + + return ret; +} + +static inline int atomic_futex_op_xchg_and(int oparg, int __user *uaddr, + int *oldval) +{ + unsigned long flags; + int ret; + + local_irq_save(flags); + + ret = get_user(*oldval, uaddr); + if (!ret) + ret = put_user(*oldval & oparg, uaddr); + + local_irq_restore(flags); + + return ret; +} + +static inline int atomic_futex_op_xchg_xor(int oparg, int __user *uaddr, + int *oldval) +{ + unsigned long flags; + int ret; + + local_irq_save(flags); + + ret = get_user(*oldval, uaddr); + if (!ret) + ret = put_user(*oldval ^ oparg, uaddr); + + local_irq_restore(flags); + + return ret; +} + +static inline int atomic_futex_op_cmpxchg_inatomic(int __user *uaddr, + int oldval, int newval) +{ + unsigned long flags; + int ret, prev = 0; + + local_irq_save(flags); + + ret = get_user(prev, uaddr); + if (!ret && oldval == prev) + ret = put_user(newval, uaddr); + + local_irq_restore(flags); + + if (ret) + return ret; + + return prev; +} + +#endif /* __ASM_SH_FUTEX_IRQ_H */ diff --git a/arch/sh/include/asm/futex.h b/arch/sh/include/asm/futex.h new file mode 100644 index 00000000000..68256ec5fa3 --- /dev/null +++ b/arch/sh/include/asm/futex.h @@ -0,0 +1,77 @@ +#ifndef __ASM_SH_FUTEX_H +#define __ASM_SH_FUTEX_H + +#ifdef __KERNEL__ + +#include +#include +#include + +/* XXX: UP variants, fix for SH-4A and SMP.. */ +#include + +static inline int futex_atomic_op_inuser(int encoded_op, int __user *uaddr) +{ + int op = (encoded_op >> 28) & 7; + int cmp = (encoded_op >> 24) & 15; + int oparg = (encoded_op << 8) >> 20; + int cmparg = (encoded_op << 20) >> 20; + int oldval = 0, ret; + + if (encoded_op & (FUTEX_OP_OPARG_SHIFT << 28)) + oparg = 1 << oparg; + + if (!access_ok(VERIFY_WRITE, uaddr, sizeof(int))) + return -EFAULT; + + pagefault_disable(); + + switch (op) { + case FUTEX_OP_SET: + ret = atomic_futex_op_xchg_set(oparg, uaddr, &oldval); + break; + case FUTEX_OP_ADD: + ret = atomic_futex_op_xchg_add(oparg, uaddr, &oldval); + break; + case FUTEX_OP_OR: + ret = atomic_futex_op_xchg_or(oparg, uaddr, &oldval); + break; + case FUTEX_OP_ANDN: + ret = atomic_futex_op_xchg_and(~oparg, uaddr, &oldval); + break; + case FUTEX_OP_XOR: + ret = atomic_futex_op_xchg_xor(oparg, uaddr, &oldval); + break; + default: + ret = -ENOSYS; + break; + } + + pagefault_enable(); + + if (!ret) { + switch (cmp) { + case FUTEX_OP_CMP_EQ: ret = (oldval == cmparg); break; + case FUTEX_OP_CMP_NE: ret = (oldval != cmparg); break; + case FUTEX_OP_CMP_LT: ret = (oldval < cmparg); break; + case FUTEX_OP_CMP_GE: ret = (oldval >= cmparg); break; + case FUTEX_OP_CMP_LE: ret = (oldval <= cmparg); break; + case FUTEX_OP_CMP_GT: ret = (oldval > cmparg); break; + default: ret = -ENOSYS; + } + } + + return ret; +} + +static inline int +futex_atomic_cmpxchg_inatomic(int __user *uaddr, int oldval, int newval) +{ + if (!access_ok(VERIFY_WRITE, uaddr, sizeof(int))) + return -EFAULT; + + return atomic_futex_op_cmpxchg_inatomic(uaddr, oldval, newval); +} + +#endif /* __KERNEL__ */ +#endif /* __ASM_SH_FUTEX_H */ diff --git a/arch/sh/include/asm/gpio.h b/arch/sh/include/asm/gpio.h new file mode 100644 index 00000000000..cf32bd2df88 --- /dev/null +++ b/arch/sh/include/asm/gpio.h @@ -0,0 +1,19 @@ +/* + * include/asm-sh/gpio.h + * + * Copyright (C) 2007 Markus Brunner, Mark Jonas + * + * Addresses for the Pin Function Controller + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#ifndef __ASM_SH_GPIO_H +#define __ASM_SH_GPIO_H + +#if defined(CONFIG_CPU_SH3) +#include +#endif + +#endif /* __ASM_SH_GPIO_H */ diff --git a/arch/sh/include/asm/hardirq.h b/arch/sh/include/asm/hardirq.h new file mode 100644 index 00000000000..715ee237fc7 --- /dev/null +++ b/arch/sh/include/asm/hardirq.h @@ -0,0 +1,16 @@ +#ifndef __ASM_SH_HARDIRQ_H +#define __ASM_SH_HARDIRQ_H + +#include +#include + +/* entry.S is sensitive to the offsets of these fields */ +typedef struct { + unsigned int __softirq_pending; +} ____cacheline_aligned irq_cpustat_t; + +#include /* Standard mappings for irq_cpustat_t above */ + +extern void ack_bad_irq(unsigned int irq); + +#endif /* __ASM_SH_HARDIRQ_H */ diff --git a/arch/sh/include/asm/hd64461.h b/arch/sh/include/asm/hd64461.h new file mode 100644 index 00000000000..8c1353baf00 --- /dev/null +++ b/arch/sh/include/asm/hd64461.h @@ -0,0 +1,250 @@ +#ifndef __ASM_SH_HD64461 +#define __ASM_SH_HD64461 +/* + * Copyright (C) 2007 Kristoffer Ericson + * Copyright (C) 2004 Paul Mundt + * Copyright (C) 2000 YAEGASHI Takeshi + * + * Hitachi HD64461 companion chip support + * (please note manual reference 0x10000000 = 0xb0000000) + */ + +/* Constants for PCMCIA mappings */ +#define HD64461_PCC_WINDOW 0x01000000 + +/* Area 6 - Slot 0 - memory and/or IO card */ +#define HD64461_PCC0_BASE (CONFIG_HD64461_IOBASE + 0x8000000) +#define HD64461_PCC0_ATTR (HD64461_PCC0_BASE) /* 0xb80000000 */ +#define HD64461_PCC0_COMM (HD64461_PCC0_BASE+HD64461_PCC_WINDOW) /* 0xb90000000 */ +#define HD64461_PCC0_IO (HD64461_PCC0_BASE+2*HD64461_PCC_WINDOW) /* 0xba0000000 */ + +/* Area 5 - Slot 1 - memory card only */ +#define HD64461_PCC1_BASE (CONFIG_HD64461_IOBASE + 0x4000000) +#define HD64461_PCC1_ATTR (HD64461_PCC1_BASE) /* 0xb4000000 */ +#define HD64461_PCC1_COMM (HD64461_PCC1_BASE+HD64461_PCC_WINDOW) /* 0xb5000000 */ + +/* Standby Control Register for HD64461 */ +#define HD64461_STBCR CONFIG_HD64461_IOBASE +#define HD64461_STBCR_CKIO_STBY 0x2000 +#define HD64461_STBCR_SAFECKE_IST 0x1000 +#define HD64461_STBCR_SLCKE_IST 0x0800 +#define HD64461_STBCR_SAFECKE_OST 0x0400 +#define HD64461_STBCR_SLCKE_OST 0x0200 +#define HD64461_STBCR_SMIAST 0x0100 +#define HD64461_STBCR_SLCDST 0x0080 +#define HD64461_STBCR_SPC0ST 0x0040 +#define HD64461_STBCR_SPC1ST 0x0020 +#define HD64461_STBCR_SAFEST 0x0010 +#define HD64461_STBCR_STM0ST 0x0008 +#define HD64461_STBCR_STM1ST 0x0004 +#define HD64461_STBCR_SIRST 0x0002 +#define HD64461_STBCR_SURTST 0x0001 + +/* System Configuration Register */ +#define HD64461_SYSCR (CONFIG_HD64461_IOBASE + 0x02) + +/* CPU Data Bus Control Register */ +#define HD64461_SCPUCR (CONFIG_HD64461_IOBASE + 0x04) + +/* Base Address Register */ +#define HD64461_LCDCBAR (CONFIG_HD64461_IOBASE + 0x1000) + +/* Line increment address */ +#define HD64461_LCDCLOR (CONFIG_HD64461_IOBASE + 0x1002) + +/* Controls LCD controller */ +#define HD64461_LCDCCR (CONFIG_HD64461_IOBASE + 0x1004) + +/* LCCDR control bits */ +#define HD64461_LCDCCR_STBACK 0x0400 /* Standby Back */ +#define HD64461_LCDCCR_STREQ 0x0100 /* Standby Request */ +#define HD64461_LCDCCR_MOFF 0x0080 /* Memory Off */ +#define HD64461_LCDCCR_REFSEL 0x0040 /* Refresh Select */ +#define HD64461_LCDCCR_EPON 0x0020 /* End Power On */ +#define HD64461_LCDCCR_SPON 0x0010 /* Start Power On */ + +/* Controls LCD (1) */ +#define HD64461_LDR1 (CONFIG_HD64461_IOBASE + 0x1010) +#define HD64461_LDR1_DON 0x01 /* Display On */ +#define HD64461_LDR1_DINV 0x80 /* Display Invert */ + +/* Controls LCD (2) */ +#define HD64461_LDR2 (CONFIG_HD64461_IOBASE + 0x1012) +#define HD64461_LDHNCR (CONFIG_HD64461_IOBASE + 0x1014) /* Number of horizontal characters */ +#define HD64461_LDHNSR (CONFIG_HD64461_IOBASE + 0x1016) /* Specify output start position + width of CL1 */ +#define HD64461_LDVNTR (CONFIG_HD64461_IOBASE + 0x1018) /* Specify total vertical lines */ +#define HD64461_LDVNDR (CONFIG_HD64461_IOBASE + 0x101a) /* specify number of display vertical lines */ +#define HD64461_LDVSPR (CONFIG_HD64461_IOBASE + 0x101c) /* specify vertical synchronization pos and AC nr */ + +/* Controls LCD (3) */ +#define HD64461_LDR3 (CONFIG_HD64461_IOBASE + 0x101e) + +/* Palette Registers */ +#define HD64461_CPTWAR (CONFIG_HD64461_IOBASE + 0x1030) /* Color Palette Write Address Register */ +#define HD64461_CPTWDR (CONFIG_HD64461_IOBASE + 0x1032) /* Color Palette Write Data Register */ +#define HD64461_CPTRAR (CONFIG_HD64461_IOBASE + 0x1034) /* Color Palette Read Address Register */ +#define HD64461_CPTRDR (CONFIG_HD64461_IOBASE + 0x1036) /* Color Palette Read Data Register */ + +#define HD64461_GRDOR (CONFIG_HD64461_IOBASE + 0x1040) /* Display Resolution Offset Register */ +#define HD64461_GRSCR (CONFIG_HD64461_IOBASE + 0x1042) /* Solid Color Register */ +#define HD64461_GRCFGR (CONFIG_HD64461_IOBASE + 0x1044) /* Accelerator Configuration Register */ + +#define HD64461_GRCFGR_ACCSTATUS 0x10 /* Accelerator Status */ +#define HD64461_GRCFGR_ACCRESET 0x08 /* Accelerator Reset */ +#define HD64461_GRCFGR_ACCSTART_BITBLT 0x06 /* Accelerator Start BITBLT */ +#define HD64461_GRCFGR_ACCSTART_LINE 0x04 /* Accelerator Start Line Drawing */ +#define HD64461_GRCFGR_COLORDEPTH16 0x01 /* Sets Colordepth 16 for Accelerator */ +#define HD64461_GRCFGR_COLORDEPTH8 0x01 /* Sets Colordepth 8 for Accelerator */ + +/* Line Drawing Registers */ +#define HD64461_LNSARH (CONFIG_HD64461_IOBASE + 0x1046) /* Line Start Address Register (H) */ +#define HD64461_LNSARL (CONFIG_HD64461_IOBASE + 0x1048) /* Line Start Address Register (L) */ +#define HD64461_LNAXLR (CONFIG_HD64461_IOBASE + 0x104a) /* Axis Pixel Length Register */ +#define HD64461_LNDGR (CONFIG_HD64461_IOBASE + 0x104c) /* Diagonal Register */ +#define HD64461_LNAXR (CONFIG_HD64461_IOBASE + 0x104e) /* Axial Register */ +#define HD64461_LNERTR (CONFIG_HD64461_IOBASE + 0x1050) /* Start Error Term Register */ +#define HD64461_LNMDR (CONFIG_HD64461_IOBASE + 0x1052) /* Line Mode Register */ + +/* BitBLT Registers */ +#define HD64461_BBTSSARH (CONFIG_HD64461_IOBASE + 0x1054) /* Source Start Address Register (H) */ +#define HD64461_BBTSSARL (CONFIG_HD64461_IOBASE + 0x1056) /* Source Start Address Register (L) */ +#define HD64461_BBTDSARH (CONFIG_HD64461_IOBASE + 0x1058) /* Destination Start Address Register (H) */ +#define HD64461_BBTDSARL (CONFIG_HD64461_IOBASE + 0x105a) /* Destination Start Address Register (L) */ +#define HD64461_BBTDWR (CONFIG_HD64461_IOBASE + 0x105c) /* Destination Block Width Register */ +#define HD64461_BBTDHR (CONFIG_HD64461_IOBASE + 0x105e) /* Destination Block Height Register */ +#define HD64461_BBTPARH (CONFIG_HD64461_IOBASE + 0x1060) /* Pattern Start Address Register (H) */ +#define HD64461_BBTPARL (CONFIG_HD64461_IOBASE + 0x1062) /* Pattern Start Address Register (L) */ +#define HD64461_BBTMARH (CONFIG_HD64461_IOBASE + 0x1064) /* Mask Start Address Register (H) */ +#define HD64461_BBTMARL (CONFIG_HD64461_IOBASE + 0x1066) /* Mask Start Address Register (L) */ +#define HD64461_BBTROPR (CONFIG_HD64461_IOBASE + 0x1068) /* ROP Register */ +#define HD64461_BBTMDR (CONFIG_HD64461_IOBASE + 0x106a) /* BitBLT Mode Register */ + +/* PC Card Controller Registers */ +/* Maps to Physical Area 6 */ +#define HD64461_PCC0ISR (CONFIG_HD64461_IOBASE + 0x2000) /* socket 0 interface status */ +#define HD64461_PCC0GCR (CONFIG_HD64461_IOBASE + 0x2002) /* socket 0 general control */ +#define HD64461_PCC0CSCR (CONFIG_HD64461_IOBASE + 0x2004) /* socket 0 card status change */ +#define HD64461_PCC0CSCIER (CONFIG_HD64461_IOBASE + 0x2006) /* socket 0 card status change interrupt enable */ +#define HD64461_PCC0SCR (CONFIG_HD64461_IOBASE + 0x2008) /* socket 0 software control */ +/* Maps to Physical Area 5 */ +#define HD64461_PCC1ISR (CONFIG_HD64461_IOBASE + 0x2010) /* socket 1 interface status */ +#define HD64461_PCC1GCR (CONFIG_HD64461_IOBASE + 0x2012) /* socket 1 general control */ +#define HD64461_PCC1CSCR (CONFIG_HD64461_IOBASE + 0x2014) /* socket 1 card status change */ +#define HD64461_PCC1CSCIER (CONFIG_HD64461_IOBASE + 0x2016) /* socket 1 card status change interrupt enable */ +#define HD64461_PCC1SCR (CONFIG_HD64461_IOBASE + 0x2018) /* socket 1 software control */ + +/* PCC Interface Status Register */ +#define HD64461_PCCISR_READY 0x80 /* card ready */ +#define HD64461_PCCISR_MWP 0x40 /* card write-protected */ +#define HD64461_PCCISR_VS2 0x20 /* voltage select pin 2 */ +#define HD64461_PCCISR_VS1 0x10 /* voltage select pin 1 */ +#define HD64461_PCCISR_CD2 0x08 /* card detect 2 */ +#define HD64461_PCCISR_CD1 0x04 /* card detect 1 */ +#define HD64461_PCCISR_BVD2 0x02 /* battery 1 */ +#define HD64461_PCCISR_BVD1 0x01 /* battery 1 */ + +#define HD64461_PCCISR_PCD_MASK 0x0c /* card detect */ +#define HD64461_PCCISR_BVD_MASK 0x03 /* battery voltage */ +#define HD64461_PCCISR_BVD_BATGOOD 0x03 /* battery good */ +#define HD64461_PCCISR_BVD_BATWARN 0x01 /* battery low warning */ +#define HD64461_PCCISR_BVD_BATDEAD1 0x02 /* battery dead */ +#define HD64461_PCCISR_BVD_BATDEAD2 0x00 /* battery dead */ + +/* PCC General Control Register */ +#define HD64461_PCCGCR_DRVE 0x80 /* output drive */ +#define HD64461_PCCGCR_PCCR 0x40 /* PC card reset */ +#define HD64461_PCCGCR_PCCT 0x20 /* PC card type, 1=IO&mem, 0=mem */ +#define HD64461_PCCGCR_VCC0 0x10 /* voltage control pin VCC0SEL0 */ +#define HD64461_PCCGCR_PMMOD 0x08 /* memory mode */ +#define HD64461_PCCGCR_PA25 0x04 /* pin A25 */ +#define HD64461_PCCGCR_PA24 0x02 /* pin A24 */ +#define HD64461_PCCGCR_REG 0x01 /* pin PCC0REG# */ + +/* PCC Card Status Change Register */ +#define HD64461_PCCCSCR_SCDI 0x80 /* sw card detect intr */ +#define HD64461_PCCCSCR_SRV1 0x40 /* reserved */ +#define HD64461_PCCCSCR_IREQ 0x20 /* IREQ intr req */ +#define HD64461_PCCCSCR_SC 0x10 /* STSCHG (status change) pin */ +#define HD64461_PCCCSCR_CDC 0x08 /* CD (card detect) change */ +#define HD64461_PCCCSCR_RC 0x04 /* READY change */ +#define HD64461_PCCCSCR_BW 0x02 /* battery warning change */ +#define HD64461_PCCCSCR_BD 0x01 /* battery dead change */ + +/* PCC Card Status Change Interrupt Enable Register */ +#define HD64461_PCCCSCIER_CRE 0x80 /* change reset enable */ +#define HD64461_PCCCSCIER_IREQE_MASK 0x60 /* IREQ enable */ +#define HD64461_PCCCSCIER_IREQE_DISABLED 0x00 /* IREQ disabled */ +#define HD64461_PCCCSCIER_IREQE_LEVEL 0x20 /* IREQ level-triggered */ +#define HD64461_PCCCSCIER_IREQE_FALLING 0x40 /* IREQ falling-edge-trig */ +#define HD64461_PCCCSCIER_IREQE_RISING 0x60 /* IREQ rising-edge-trig */ + +#define HD64461_PCCCSCIER_SCE 0x10 /* status change enable */ +#define HD64461_PCCCSCIER_CDE 0x08 /* card detect change enable */ +#define HD64461_PCCCSCIER_RE 0x04 /* ready change enable */ +#define HD64461_PCCCSCIER_BWE 0x02 /* battery warn change enable */ +#define HD64461_PCCCSCIER_BDE 0x01 /* battery dead change enable*/ + +/* PCC Software Control Register */ +#define HD64461_PCCSCR_VCC1 0x02 /* voltage control pin 1 */ +#define HD64461_PCCSCR_SWP 0x01 /* write protect */ + +/* PCC0 Output Pins Control Register */ +#define HD64461_P0OCR (CONFIG_HD64461_IOBASE + 0x202a) + +/* PCC1 Output Pins Control Register */ +#define HD64461_P1OCR (CONFIG_HD64461_IOBASE + 0x202c) + +/* PC Card General Control Register */ +#define HD64461_PGCR (CONFIG_HD64461_IOBASE + 0x202e) + +/* Port Control Registers */ +#define HD64461_GPACR (CONFIG_HD64461_IOBASE + 0x4000) /* Port A - Handles IRDA/TIMER */ +#define HD64461_GPBCR (CONFIG_HD64461_IOBASE + 0x4002) /* Port B - Handles UART */ +#define HD64461_GPCCR (CONFIG_HD64461_IOBASE + 0x4004) /* Port C - Handles PCMCIA 1 */ +#define HD64461_GPDCR (CONFIG_HD64461_IOBASE + 0x4006) /* Port D - Handles PCMCIA 1 */ + +/* Port Control Data Registers */ +#define HD64461_GPADR (CONFIG_HD64461_IOBASE + 0x4010) /* A */ +#define HD64461_GPBDR (CONFIG_HD64461_IOBASE + 0x4012) /* B */ +#define HD64461_GPCDR (CONFIG_HD64461_IOBASE + 0x4014) /* C */ +#define HD64461_GPDDR (CONFIG_HD64461_IOBASE + 0x4016) /* D */ + +/* Interrupt Control Registers */ +#define HD64461_GPAICR (CONFIG_HD64461_IOBASE + 0x4020) /* A */ +#define HD64461_GPBICR (CONFIG_HD64461_IOBASE + 0x4022) /* B */ +#define HD64461_GPCICR (CONFIG_HD64461_IOBASE + 0x4024) /* C */ +#define HD64461_GPDICR (CONFIG_HD64461_IOBASE + 0x4026) /* D */ + +/* Interrupt Status Registers */ +#define HD64461_GPAISR (CONFIG_HD64461_IOBASE + 0x4040) /* A */ +#define HD64461_GPBISR (CONFIG_HD64461_IOBASE + 0x4042) /* B */ +#define HD64461_GPCISR (CONFIG_HD64461_IOBASE + 0x4044) /* C */ +#define HD64461_GPDISR (CONFIG_HD64461_IOBASE + 0x4046) /* D */ + +/* Interrupt Request Register & Interrupt Mask Register */ +#define HD64461_NIRR (CONFIG_HD64461_IOBASE + 0x5000) +#define HD64461_NIMR (CONFIG_HD64461_IOBASE + 0x5002) + +#define HD64461_IRQBASE OFFCHIP_IRQ_BASE +#define OFFCHIP_IRQ_BASE 64 +#define HD64461_IRQ_NUM 16 + +#define HD64461_IRQ_UART (HD64461_IRQBASE+5) +#define HD64461_IRQ_IRDA (HD64461_IRQBASE+6) +#define HD64461_IRQ_TMU1 (HD64461_IRQBASE+9) +#define HD64461_IRQ_TMU0 (HD64461_IRQBASE+10) +#define HD64461_IRQ_GPIO (HD64461_IRQBASE+11) +#define HD64461_IRQ_AFE (HD64461_IRQBASE+12) +#define HD64461_IRQ_PCC1 (HD64461_IRQBASE+13) +#define HD64461_IRQ_PCC0 (HD64461_IRQBASE+14) + +#define __IO_PREFIX hd64461 +#include + +/* arch/sh/cchips/hd6446x/hd64461/setup.c */ +int hd64461_irq_demux(int irq); +void hd64461_register_irq_demux(int irq, + int (*demux) (int irq, void *dev), void *dev); +void hd64461_unregister_irq_demux(int irq); + +#endif diff --git a/arch/sh/include/asm/hd64465/gpio.h b/arch/sh/include/asm/hd64465/gpio.h new file mode 100644 index 00000000000..a3cdca2713d --- /dev/null +++ b/arch/sh/include/asm/hd64465/gpio.h @@ -0,0 +1,46 @@ +#ifndef _ASM_SH_HD64465_GPIO_ +#define _ASM_SH_HD64465_GPIO_ 1 +/* + * $Id: gpio.h,v 1.3 2003/05/04 19:30:14 lethal Exp $ + * + * Hitachi HD64465 companion chip: General Purpose IO pins support. + * This layer enables other device drivers to configure GPIO + * pins, get and set their values, and register an interrupt + * routine for when input pins change in hardware. + * + * by Greg Banks + * (c) 2000 PocketPenguins Inc. + */ +#include + +/* Macro to construct a portpin number (used in all + * subsequent functions) from a port letter and a pin + * number, e.g. HD64465_GPIO_PORTPIN('A', 5). + */ +#define HD64465_GPIO_PORTPIN(port,pin) (((port)-'A')<<3|(pin)) + +/* Pin configuration constants for _configure() */ +#define HD64465_GPIO_FUNCTION2 0 /* use the pin's *other* function */ +#define HD64465_GPIO_OUT 1 /* output */ +#define HD64465_GPIO_IN_PULLUP 2 /* input, pull-up MOS on */ +#define HD64465_GPIO_IN 3 /* input */ + +/* Configure a pin's direction */ +extern void hd64465_gpio_configure(int portpin, int direction); + +/* Get, set value */ +extern void hd64465_gpio_set_pin(int portpin, unsigned int value); +extern unsigned int hd64465_gpio_get_pin(int portpin); +extern void hd64465_gpio_set_port(int port, unsigned int value); +extern unsigned int hd64465_gpio_get_port(int port); + +/* mode constants for _register_irq() */ +#define HD64465_GPIO_FALLING 0 +#define HD64465_GPIO_RISING 1 + +/* Interrupt on external value change */ +extern void hd64465_gpio_register_irq(int portpin, int mode, + void (*handler)(int portpin, void *dev), void *dev); +extern void hd64465_gpio_unregister_irq(int portpin); + +#endif /* _ASM_SH_HD64465_GPIO_ */ diff --git a/arch/sh/include/asm/hd64465/hd64465.h b/arch/sh/include/asm/hd64465/hd64465.h new file mode 100644 index 00000000000..cfd0e803d2a --- /dev/null +++ b/arch/sh/include/asm/hd64465/hd64465.h @@ -0,0 +1,256 @@ +#ifndef _ASM_SH_HD64465_ +#define _ASM_SH_HD64465_ 1 +/* + * $Id: hd64465.h,v 1.3 2003/05/04 19:30:15 lethal Exp $ + * + * Hitachi HD64465 companion chip support + * + * by Greg Banks + * (c) 2000 PocketPenguins Inc. + * + * Derived from which bore the message: + * Copyright (C) 2000 YAEGASHI Takeshi + */ +#include +#include + +/* + * Note that registers are defined here as virtual port numbers, + * which have no meaning except to get translated by hd64465_isa_port2addr() + * to an address in the range 0xb0000000-0xb3ffffff. Note that + * this translation happens to consist of adding the lower 16 bits + * of the virtual port number to 0xb0000000. Note also that the manual + * shows addresses as absolute physical addresses starting at 0x10000000, + * so e.g. the NIRR register is listed as 0x15000 here, 0x10005000 in the + * manual, and accessed using address 0xb0005000 - Greg. + */ + +/* System registers */ +#define HD64465_REG_SRR 0x1000c /* System Revision Register */ +#define HD64465_REG_SDID 0x10010 /* System Device ID Reg */ +#define HD64465_SDID 0x8122 /* 64465 device ID */ + +/* Power Management registers */ +#define HD64465_REG_SMSCR 0x10000 /* System Module Standby Control Reg */ +#define HD64465_SMSCR_PS2ST 0x4000 /* PS/2 Standby */ +#define HD64465_SMSCR_ADCST 0x1000 /* ADC Standby */ +#define HD64465_SMSCR_UARTST 0x0800 /* UART Standby */ +#define HD64465_SMSCR_SCDIST 0x0200 /* Serial Codec Standby */ +#define HD64465_SMSCR_PPST 0x0100 /* Parallel Port Standby */ +#define HD64465_SMSCR_PC0ST 0x0040 /* PCMCIA0 Standby */ +#define HD64465_SMSCR_PC1ST 0x0020 /* PCMCIA1 Standby */ +#define HD64465_SMSCR_AFEST 0x0010 /* AFE Standby */ +#define HD64465_SMSCR_TM0ST 0x0008 /* Timer0 Standby */ +#define HD64465_SMSCR_TM1ST 0x0004 /* Timer1 Standby */ +#define HD64465_SMSCR_IRDAST 0x0002 /* IRDA Standby */ +#define HD64465_SMSCR_KBCST 0x0001 /* Keyboard Controller Standby */ + +/* Interrupt Controller registers */ +#define HD64465_REG_NIRR 0x15000 /* Interrupt Request Register */ +#define HD64465_REG_NIMR 0x15002 /* Interrupt Mask Register */ +#define HD64465_REG_NITR 0x15004 /* Interrupt Trigger Mode Register */ + +/* Timer registers */ +#define HD64465_REG_TCVR1 0x16000 /* Timer 1 constant value register */ +#define HD64465_REG_TCVR0 0x16002 /* Timer 0 constant value register */ +#define HD64465_REG_TRVR1 0x16004 /* Timer 1 read value register */ +#define HD64465_REG_TRVR0 0x16006 /* Timer 0 read value register */ +#define HD64465_REG_TCR1 0x16008 /* Timer 1 control register */ +#define HD64465_REG_TCR0 0x1600A /* Timer 0 control register */ +#define HD64465_TCR_EADT 0x10 /* Enable ADTRIG# signal */ +#define HD64465_TCR_ETMO 0x08 /* Enable TMO signal */ +#define HD64465_TCR_PST_MASK 0x06 /* Clock Prescale */ +#define HD64465_TCR_PST_1 0x06 /* 1:1 */ +#define HD64465_TCR_PST_4 0x04 /* 1:4 */ +#define HD64465_TCR_PST_8 0x02 /* 1:8 */ +#define HD64465_TCR_PST_16 0x00 /* 1:16 */ +#define HD64465_TCR_TSTP 0x01 /* Start/Stop timer */ +#define HD64465_REG_TIRR 0x1600C /* Timer interrupt request register */ +#define HD64465_REG_TIDR 0x1600E /* Timer interrupt disable register */ +#define HD64465_REG_PWM1CS 0x16010 /* PWM 1 clock scale register */ +#define HD64465_REG_PWM1LPC 0x16012 /* PWM 1 low pulse width counter register */ +#define HD64465_REG_PWM1HPC 0x16014 /* PWM 1 high pulse width counter register */ +#define HD64465_REG_PWM0CS 0x16018 /* PWM 0 clock scale register */ +#define HD64465_REG_PWM0LPC 0x1601A /* PWM 0 low pulse width counter register */ +#define HD64465_REG_PWM0HPC 0x1601C /* PWM 0 high pulse width counter register */ + +/* Analog/Digital Converter registers */ +#define HD64465_REG_ADDRA 0x1E000 /* A/D data register A */ +#define HD64465_REG_ADDRB 0x1E002 /* A/D data register B */ +#define HD64465_REG_ADDRC 0x1E004 /* A/D data register C */ +#define HD64465_REG_ADDRD 0x1E006 /* A/D data register D */ +#define HD64465_REG_ADCSR 0x1E008 /* A/D control/status register */ +#define HD64465_ADCSR_ADF 0x80 /* A/D End Flag */ +#define HD64465_ADCSR_ADST 0x40 /* A/D Start Flag */ +#define HD64465_ADCSR_ADIS 0x20 /* A/D Interrupt Status */ +#define HD64465_ADCSR_TRGE 0x10 /* A/D Trigger Enable */ +#define HD64465_ADCSR_ADIE 0x08 /* A/D Interrupt Enable */ +#define HD64465_ADCSR_SCAN 0x04 /* A/D Scan Mode */ +#define HD64465_ADCSR_CH_MASK 0x03 /* A/D Channel */ +#define HD64465_REG_ADCALCR 0x1E00A /* A/D calibration sample control */ +#define HD64465_REG_ADCAL 0x1E00C /* A/D calibration data register */ + + +/* General Purpose I/O ports registers */ +#define HD64465_REG_GPACR 0x14000 /* Port A Control Register */ +#define HD64465_REG_GPBCR 0x14002 /* Port B Control Register */ +#define HD64465_REG_GPCCR 0x14004 /* Port C Control Register */ +#define HD64465_REG_GPDCR 0x14006 /* Port D Control Register */ +#define HD64465_REG_GPECR 0x14008 /* Port E Control Register */ +#define HD64465_REG_GPADR 0x14010 /* Port A Data Register */ +#define HD64465_REG_GPBDR 0x14012 /* Port B Data Register */ +#define HD64465_REG_GPCDR 0x14014 /* Port C Data Register */ +#define HD64465_REG_GPDDR 0x14016 /* Port D Data Register */ +#define HD64465_REG_GPEDR 0x14018 /* Port E Data Register */ +#define HD64465_REG_GPAICR 0x14020 /* Port A Interrupt Control Register */ +#define HD64465_REG_GPBICR 0x14022 /* Port B Interrupt Control Register */ +#define HD64465_REG_GPCICR 0x14024 /* Port C Interrupt Control Register */ +#define HD64465_REG_GPDICR 0x14026 /* Port D Interrupt Control Register */ +#define HD64465_REG_GPEICR 0x14028 /* Port E Interrupt Control Register */ +#define HD64465_REG_GPAISR 0x14040 /* Port A Interrupt Status Register */ +#define HD64465_REG_GPBISR 0x14042 /* Port B Interrupt Status Register */ +#define HD64465_REG_GPCISR 0x14044 /* Port C Interrupt Status Register */ +#define HD64465_REG_GPDISR 0x14046 /* Port D Interrupt Status Register */ +#define HD64465_REG_GPEISR 0x14048 /* Port E Interrupt Status Register */ + +/* PCMCIA bridge interface */ +#define HD64465_REG_PCC0ISR 0x12000 /* socket 0 interface status */ +#define HD64465_PCCISR_PREADY 0x80 /* mem card ready / io card IREQ */ +#define HD64465_PCCISR_PIREQ 0x80 +#define HD64465_PCCISR_PMWP 0x40 /* mem card write-protected */ +#define HD64465_PCCISR_PVS2 0x20 /* voltage select pin 2 */ +#define HD64465_PCCISR_PVS1 0x10 /* voltage select pin 1 */ +#define HD64465_PCCISR_PCD_MASK 0x0c /* card detect */ +#define HD64465_PCCISR_PBVD_MASK 0x03 /* battery voltage */ +#define HD64465_PCCISR_PBVD_BATGOOD 0x03 /* battery good */ +#define HD64465_PCCISR_PBVD_BATWARN 0x01 /* battery low warning */ +#define HD64465_PCCISR_PBVD_BATDEAD1 0x02 /* battery dead */ +#define HD64465_PCCISR_PBVD_BATDEAD2 0x00 /* battery dead */ +#define HD64465_REG_PCC0GCR 0x12002 /* socket 0 general control */ +#define HD64465_PCCGCR_PDRV 0x80 /* output drive */ +#define HD64465_PCCGCR_PCCR 0x40 /* PC card reset */ +#define HD64465_PCCGCR_PCCT 0x20 /* PC card type, 1=IO&mem, 0=mem */ +#define HD64465_PCCGCR_PVCC0 0x10 /* voltage control pin VCC0SEL0 */ +#define HD64465_PCCGCR_PMMOD 0x08 /* memory mode */ +#define HD64465_PCCGCR_PPA25 0x04 /* pin A25 */ +#define HD64465_PCCGCR_PPA24 0x02 /* pin A24 */ +#define HD64465_PCCGCR_PREG 0x01 /* ping PCC0REG# */ +#define HD64465_REG_PCC0CSCR 0x12004 /* socket 0 card status change */ +#define HD64465_PCCCSCR_PSCDI 0x80 /* sw card detect intr */ +#define HD64465_PCCCSCR_PSWSEL 0x40 /* power select */ +#define HD64465_PCCCSCR_PIREQ 0x20 /* IREQ intr req */ +#define HD64465_PCCCSCR_PSC 0x10 /* STSCHG (status change) pin */ +#define HD64465_PCCCSCR_PCDC 0x08 /* CD (card detect) change */ +#define HD64465_PCCCSCR_PRC 0x04 /* ready change */ +#define HD64465_PCCCSCR_PBW 0x02 /* battery warning change */ +#define HD64465_PCCCSCR_PBD 0x01 /* battery dead change */ +#define HD64465_REG_PCC0CSCIER 0x12006 /* socket 0 card status change interrupt enable */ +#define HD64465_PCCCSCIER_PCRE 0x80 /* change reset enable */ +#define HD64465_PCCCSCIER_PIREQE_MASK 0x60 /* IREQ enable */ +#define HD64465_PCCCSCIER_PIREQE_DISABLED 0x00 /* IREQ disabled */ +#define HD64465_PCCCSCIER_PIREQE_LEVEL 0x20 /* IREQ level-triggered */ +#define HD64465_PCCCSCIER_PIREQE_FALLING 0x40 /* IREQ falling-edge-trig */ +#define HD64465_PCCCSCIER_PIREQE_RISING 0x60 /* IREQ rising-edge-trig */ +#define HD64465_PCCCSCIER_PSCE 0x10 /* status change enable */ +#define HD64465_PCCCSCIER_PCDE 0x08 /* card detect change enable */ +#define HD64465_PCCCSCIER_PRE 0x04 /* ready change enable */ +#define HD64465_PCCCSCIER_PBWE 0x02 /* battery warn change enable */ +#define HD64465_PCCCSCIER_PBDE 0x01 /* battery dead change enable*/ +#define HD64465_REG_PCC0SCR 0x12008 /* socket 0 software control */ +#define HD64465_PCCSCR_SHDN 0x10 /* TPS2206 SHutDowN pin */ +#define HD64465_PCCSCR_SWP 0x01 /* write protect */ +#define HD64465_REG_PCCPSR 0x1200A /* serial power switch control */ +#define HD64465_REG_PCC1ISR 0x12010 /* socket 1 interface status */ +#define HD64465_REG_PCC1GCR 0x12012 /* socket 1 general control */ +#define HD64465_REG_PCC1CSCR 0x12014 /* socket 1 card status change */ +#define HD64465_REG_PCC1CSCIER 0x12016 /* socket 1 card status change interrupt enable */ +#define HD64465_REG_PCC1SCR 0x12018 /* socket 1 software control */ + + +/* PS/2 Keyboard and mouse controller -- *not* register compatible */ +#define HD64465_REG_KBCSR 0x1dc00 /* Keyboard Control/Status reg */ +#define HD64465_KBCSR_KBCIE 0x8000 /* KBCK Input Enable */ +#define HD64465_KBCSR_KBCOE 0x4000 /* KBCK Output Enable */ +#define HD64465_KBCSR_KBDOE 0x2000 /* KB DATA Output Enable */ +#define HD64465_KBCSR_KBCD 0x1000 /* KBCK Driven */ +#define HD64465_KBCSR_KBDD 0x0800 /* KB DATA Driven */ +#define HD64465_KBCSR_KBCS 0x0400 /* KBCK pin Status */ +#define HD64465_KBCSR_KBDS 0x0200 /* KB DATA pin Status */ +#define HD64465_KBCSR_KBDP 0x0100 /* KB DATA Parity bit */ +#define HD64465_KBCSR_KBD_MASK 0x00ff /* KD DATA shift reg */ +#define HD64465_REG_KBISR 0x1dc04 /* Keyboard Interrupt Status reg */ +#define HD64465_KBISR_KBRDF 0x0001 /* KB Received Data Full */ +#define HD64465_REG_MSCSR 0x1dc10 /* Mouse Control/Status reg */ +#define HD64465_REG_MSISR 0x1dc14 /* Mouse Interrupt Status reg */ + + +/* + * Logical address at which the HD64465 is mapped. Note that this + * should always be in the P2 segment (uncached and untranslated). + */ +#ifndef CONFIG_HD64465_IOBASE +#define CONFIG_HD64465_IOBASE 0xb0000000 +#endif +/* + * The HD64465 multiplexes all its modules' interrupts onto + * this single interrupt. + */ +#ifndef CONFIG_HD64465_IRQ +#define CONFIG_HD64465_IRQ 5 +#endif + + +#define _HD64465_IO_MASK 0xf8000000 +#define is_hd64465_addr(addr) \ + ((addr & _HD64465_IO_MASK) == (CONFIG_HD64465_IOBASE & _HD64465_IO_MASK)) + +/* + * A range of 16 virtual interrupts generated by + * demuxing the HD64465 muxed interrupt. + */ +#define HD64465_IRQ_BASE OFFCHIP_IRQ_BASE +#define HD64465_IRQ_NUM 16 +#define HD64465_IRQ_ADC (HD64465_IRQ_BASE+0) +#define HD64465_IRQ_USB (HD64465_IRQ_BASE+1) +#define HD64465_IRQ_SCDI (HD64465_IRQ_BASE+2) +#define HD64465_IRQ_PARALLEL (HD64465_IRQ_BASE+3) +/* bit 4 is reserved */ +#define HD64465_IRQ_UART (HD64465_IRQ_BASE+5) +#define HD64465_IRQ_IRDA (HD64465_IRQ_BASE+6) +#define HD64465_IRQ_PS2MOUSE (HD64465_IRQ_BASE+7) +#define HD64465_IRQ_KBC (HD64465_IRQ_BASE+8) +#define HD64465_IRQ_TIMER1 (HD64465_IRQ_BASE+9) +#define HD64465_IRQ_TIMER0 (HD64465_IRQ_BASE+10) +#define HD64465_IRQ_GPIO (HD64465_IRQ_BASE+11) +#define HD64465_IRQ_AFE (HD64465_IRQ_BASE+12) +#define HD64465_IRQ_PCMCIA1 (HD64465_IRQ_BASE+13) +#define HD64465_IRQ_PCMCIA0 (HD64465_IRQ_BASE+14) +#define HD64465_IRQ_PS2KBD (HD64465_IRQ_BASE+15) + +/* Constants for PCMCIA mappings */ +#define HD64465_PCC_WINDOW 0x01000000 + +#define HD64465_PCC0_BASE 0xb8000000 /* area 6 */ +#define HD64465_PCC0_ATTR (HD64465_PCC0_BASE) +#define HD64465_PCC0_COMM (HD64465_PCC0_BASE+HD64465_PCC_WINDOW) +#define HD64465_PCC0_IO (HD64465_PCC0_BASE+2*HD64465_PCC_WINDOW) + +#define HD64465_PCC1_BASE 0xb4000000 /* area 5 */ +#define HD64465_PCC1_ATTR (HD64465_PCC1_BASE) +#define HD64465_PCC1_COMM (HD64465_PCC1_BASE+HD64465_PCC_WINDOW) +#define HD64465_PCC1_IO (HD64465_PCC1_BASE+2*HD64465_PCC_WINDOW) + +/* + * Base of USB controller interface (as memory) + */ +#define HD64465_USB_BASE (CONFIG_HD64465_IOBASE+0xb000) +#define HD64465_USB_LEN 0x1000 +/* + * Base of embedded SRAM, used for USB controller. + */ +#define HD64465_SRAM_BASE (CONFIG_HD64465_IOBASE+0x9000) +#define HD64465_SRAM_LEN 0x1000 + + + +#endif /* _ASM_SH_HD64465_ */ diff --git a/arch/sh/include/asm/hd64465/io.h b/arch/sh/include/asm/hd64465/io.h new file mode 100644 index 00000000000..139f1472e5b --- /dev/null +++ b/arch/sh/include/asm/hd64465/io.h @@ -0,0 +1,44 @@ +/* + * include/asm-sh/hd64465/io.h + * + * By Greg Banks + * (c) 2000 PocketPenguins Inc. + * + * Derived from io_hd64461.h, which bore the message: + * Copyright 2000 Stuart Menefy (stuart.menefy@st.com) + * + * May be copied or modified under the terms of the GNU General Public + * License. See linux/COPYING for more information. + * + * IO functions for an HD64465 "Windows CE Intelligent Peripheral Controller". + */ + +#ifndef _ASM_SH_IO_HD64465_H +#define _ASM_SH_IO_HD64465_H + +extern unsigned char hd64465_inb(unsigned long port); +extern unsigned short hd64465_inw(unsigned long port); +extern unsigned int hd64465_inl(unsigned long port); + +extern void hd64465_outb(unsigned char value, unsigned long port); +extern void hd64465_outw(unsigned short value, unsigned long port); +extern void hd64465_outl(unsigned int value, unsigned long port); + +extern unsigned char hd64465_inb_p(unsigned long port); +extern void hd64465_outb_p(unsigned char value, unsigned long port); + +extern unsigned long hd64465_isa_port2addr(unsigned long offset); +extern int hd64465_irq_demux(int irq); +/* Provision for generic secondary demux step -- used by PCMCIA code */ +extern void hd64465_register_irq_demux(int irq, + int (*demux)(int irq, void *dev), void *dev); +extern void hd64465_unregister_irq_demux(int irq); +/* Set this variable to 1 to see port traffic */ +extern int hd64465_io_debug; +/* Map a range of ports to a range of kernel virtual memory. + */ +extern void hd64465_port_map(unsigned short baseport, unsigned int nports, + unsigned long addr, unsigned char shift); +extern void hd64465_port_unmap(unsigned short baseport, unsigned int nports); + +#endif /* _ASM_SH_IO_HD64465_H */ diff --git a/arch/sh/include/asm/heartbeat.h b/arch/sh/include/asm/heartbeat.h new file mode 100644 index 00000000000..724a43ed245 --- /dev/null +++ b/arch/sh/include/asm/heartbeat.h @@ -0,0 +1,17 @@ +#ifndef __ASM_SH_HEARTBEAT_H +#define __ASM_SH_HEARTBEAT_H + +#include + +#define HEARTBEAT_INVERTED (1 << 0) + +struct heartbeat_data { + void __iomem *base; + unsigned char *bit_pos; + unsigned int nr_bits; + struct timer_list timer; + unsigned int regsize; + unsigned long flags; +}; + +#endif /* __ASM_SH_HEARTBEAT_H */ diff --git a/arch/sh/include/asm/hp6xx.h b/arch/sh/include/asm/hp6xx.h new file mode 100644 index 00000000000..0d4165a32dc --- /dev/null +++ b/arch/sh/include/asm/hp6xx.h @@ -0,0 +1,58 @@ +#ifndef __ASM_SH_HP6XX_H +#define __ASM_SH_HP6XX_H + +/* + * Copyright (C) 2003, 2004, 2005 Andriy Skulysh + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + */ + +#define HP680_BTN_IRQ 32 /* IRQ0_IRQ */ +#define HP680_TS_IRQ 35 /* IRQ3_IRQ */ +#define HP680_HD64461_IRQ 36 /* IRQ4_IRQ */ + +#define DAC_LCD_BRIGHTNESS 0 +#define DAC_SPEAKER_VOLUME 1 + +#define PGDR_OPENED 0x01 +#define PGDR_MAIN_BATTERY_OUT 0x04 +#define PGDR_PLAY_BUTTON 0x08 +#define PGDR_REWIND_BUTTON 0x10 +#define PGDR_RECORD_BUTTON 0x20 + +#define PHDR_TS_PEN_DOWN 0x08 + +#define PJDR_LED_BLINK 0x02 + +#define PKDR_LED_GREEN 0x10 + +#define SCPDR_TS_SCAN_ENABLE 0x20 +#define SCPDR_TS_SCAN_Y 0x02 +#define SCPDR_TS_SCAN_X 0x01 + +#define SCPCR_TS_ENABLE 0x405 +#define SCPCR_TS_MASK 0xc0f + +#define ADC_CHANNEL_TS_Y 1 +#define ADC_CHANNEL_TS_X 2 +#define ADC_CHANNEL_BATTERY 3 +#define ADC_CHANNEL_BACKUP 4 +#define ADC_CHANNEL_CHARGE 5 + +#define HD64461_GPADR_SPEAKER 0x01 +#define HD64461_GPADR_PCMCIA0 (0x02|0x08) + +#define HD64461_GPBDR_LCDOFF 0x01 +#define HD64461_GPBDR_LCD_CONTRAST_MASK 0x78 +#define HD64461_GPBDR_LED_RED 0x80 + +#include +#include + +#define PJDR 0xa4000130 +#define PKDR 0xa4000132 + +#endif /* __ASM_SH_HP6XX_H */ diff --git a/arch/sh/include/asm/hugetlb.h b/arch/sh/include/asm/hugetlb.h new file mode 100644 index 00000000000..967068fb79a --- /dev/null +++ b/arch/sh/include/asm/hugetlb.h @@ -0,0 +1,92 @@ +#ifndef _ASM_SH_HUGETLB_H +#define _ASM_SH_HUGETLB_H + +#include + + +static inline int is_hugepage_only_range(struct mm_struct *mm, + unsigned long addr, + unsigned long len) { + return 0; +} + +/* + * If the arch doesn't supply something else, assume that hugepage + * size aligned regions are ok without further preparation. + */ +static inline int prepare_hugepage_range(struct file *file, + unsigned long addr, unsigned long len) +{ + if (len & ~HPAGE_MASK) + return -EINVAL; + if (addr & ~HPAGE_MASK) + return -EINVAL; + return 0; +} + +static inline void hugetlb_prefault_arch_hook(struct mm_struct *mm) { +} + +static inline void hugetlb_free_pgd_range(struct mmu_gather *tlb, + unsigned long addr, unsigned long end, + unsigned long floor, + unsigned long ceiling) +{ + free_pgd_range(tlb, addr, end, floor, ceiling); +} + +static inline void set_huge_pte_at(struct mm_struct *mm, unsigned long addr, + pte_t *ptep, pte_t pte) +{ + set_pte_at(mm, addr, ptep, pte); +} + +static inline pte_t huge_ptep_get_and_clear(struct mm_struct *mm, + unsigned long addr, pte_t *ptep) +{ + return ptep_get_and_clear(mm, addr, ptep); +} + +static inline void huge_ptep_clear_flush(struct vm_area_struct *vma, + unsigned long addr, pte_t *ptep) +{ +} + +static inline int huge_pte_none(pte_t pte) +{ + return pte_none(pte); +} + +static inline pte_t huge_pte_wrprotect(pte_t pte) +{ + return pte_wrprotect(pte); +} + +static inline void huge_ptep_set_wrprotect(struct mm_struct *mm, + unsigned long addr, pte_t *ptep) +{ + ptep_set_wrprotect(mm, addr, ptep); +} + +static inline int huge_ptep_set_access_flags(struct vm_area_struct *vma, + unsigned long addr, pte_t *ptep, + pte_t pte, int dirty) +{ + return ptep_set_access_flags(vma, addr, ptep, pte, dirty); +} + +static inline pte_t huge_ptep_get(pte_t *ptep) +{ + return *ptep; +} + +static inline int arch_prepare_hugepage(struct page *page) +{ + return 0; +} + +static inline void arch_release_hugepage(struct page *page) +{ +} + +#endif /* _ASM_SH_HUGETLB_H */ diff --git a/arch/sh/include/asm/hw_irq.h b/arch/sh/include/asm/hw_irq.h new file mode 100644 index 00000000000..d557b00111b --- /dev/null +++ b/arch/sh/include/asm/hw_irq.h @@ -0,0 +1,123 @@ +#ifndef __ASM_SH_HW_IRQ_H +#define __ASM_SH_HW_IRQ_H + +#include +#include + +extern atomic_t irq_err_count; + +struct ipr_data { + unsigned char irq; + unsigned char ipr_idx; /* Index for the IPR registered */ + unsigned char shift; /* Number of bits to shift the data */ + unsigned char priority; /* The priority */ +}; + +struct ipr_desc { + unsigned long *ipr_offsets; + unsigned int nr_offsets; + struct ipr_data *ipr_data; + unsigned int nr_irqs; + struct irq_chip chip; +}; + +void register_ipr_controller(struct ipr_desc *); + +typedef unsigned char intc_enum; + +struct intc_vect { + intc_enum enum_id; + unsigned short vect; +}; + +#define INTC_VECT(enum_id, vect) { enum_id, vect } +#define INTC_IRQ(enum_id, irq) INTC_VECT(enum_id, irq2evt(irq)) + +struct intc_group { + intc_enum enum_id; + intc_enum enum_ids[32]; +}; + +#define INTC_GROUP(enum_id, ids...) { enum_id, { ids } } + +struct intc_mask_reg { + unsigned long set_reg, clr_reg, reg_width; + intc_enum enum_ids[32]; +#ifdef CONFIG_SMP + unsigned long smp; +#endif +}; + +struct intc_prio_reg { + unsigned long set_reg, clr_reg, reg_width, field_width; + intc_enum enum_ids[16]; +#ifdef CONFIG_SMP + unsigned long smp; +#endif +}; + +struct intc_sense_reg { + unsigned long reg, reg_width, field_width; + intc_enum enum_ids[16]; +}; + +#ifdef CONFIG_SMP +#define INTC_SMP(stride, nr) .smp = (stride) | ((nr) << 8) +#else +#define INTC_SMP(stride, nr) +#endif + +struct intc_desc { + struct intc_vect *vectors; + unsigned int nr_vectors; + struct intc_group *groups; + unsigned int nr_groups; + struct intc_mask_reg *mask_regs; + unsigned int nr_mask_regs; + struct intc_prio_reg *prio_regs; + unsigned int nr_prio_regs; + struct intc_sense_reg *sense_regs; + unsigned int nr_sense_regs; + char *name; +#if defined(CONFIG_CPU_SH3) || defined(CONFIG_CPU_SH4A) + struct intc_mask_reg *ack_regs; + unsigned int nr_ack_regs; +#endif +}; + +#define _INTC_ARRAY(a) a, sizeof(a)/sizeof(*a) +#define DECLARE_INTC_DESC(symbol, chipname, vectors, groups, \ + mask_regs, prio_regs, sense_regs) \ +struct intc_desc symbol __initdata = { \ + _INTC_ARRAY(vectors), _INTC_ARRAY(groups), \ + _INTC_ARRAY(mask_regs), _INTC_ARRAY(prio_regs), \ + _INTC_ARRAY(sense_regs), \ + chipname, \ +} + +#if defined(CONFIG_CPU_SH3) || defined(CONFIG_CPU_SH4A) +#define DECLARE_INTC_DESC_ACK(symbol, chipname, vectors, groups, \ + mask_regs, prio_regs, sense_regs, ack_regs) \ +struct intc_desc symbol __initdata = { \ + _INTC_ARRAY(vectors), _INTC_ARRAY(groups), \ + _INTC_ARRAY(mask_regs), _INTC_ARRAY(prio_regs), \ + _INTC_ARRAY(sense_regs), \ + chipname, \ + _INTC_ARRAY(ack_regs), \ +} +#endif + +void __init register_intc_controller(struct intc_desc *desc); +int intc_set_priority(unsigned int irq, unsigned int prio); + +void __init plat_irq_setup(void); +#ifdef CONFIG_CPU_SH3 +void __init plat_irq_setup_sh3(void); +#endif + +enum { IRQ_MODE_IRQ, IRQ_MODE_IRQ7654, IRQ_MODE_IRQ3210, + IRQ_MODE_IRL7654_MASK, IRQ_MODE_IRL3210_MASK, + IRQ_MODE_IRL7654, IRQ_MODE_IRL3210 }; +void __init plat_irq_setup_pins(int mode); + +#endif /* __ASM_SH_HW_IRQ_H */ diff --git a/arch/sh/include/asm/i2c-sh7760.h b/arch/sh/include/asm/i2c-sh7760.h new file mode 100644 index 00000000000..24182116711 --- /dev/null +++ b/arch/sh/include/asm/i2c-sh7760.h @@ -0,0 +1,22 @@ +/* + * MMIO/IRQ and platform data for SH7760 I2C channels + */ + +#ifndef _I2C_SH7760_H_ +#define _I2C_SH7760_H_ + +#define SH7760_I2C_DEVNAME "sh7760-i2c" + +#define SH7760_I2C0_MMIO 0xFE140000 +#define SH7760_I2C0_MMIOEND 0xFE14003B +#define SH7760_I2C0_IRQ 62 + +#define SH7760_I2C1_MMIO 0xFE150000 +#define SH7760_I2C1_MMIOEND 0xFE15003B +#define SH7760_I2C1_IRQ 63 + +struct sh7760_i2c_platdata { + unsigned int speed_khz; +}; + +#endif diff --git a/arch/sh/include/asm/ilsel.h b/arch/sh/include/asm/ilsel.h new file mode 100644 index 00000000000..e3d304b280f --- /dev/null +++ b/arch/sh/include/asm/ilsel.h @@ -0,0 +1,45 @@ +#ifndef __ASM_SH_ILSEL_H +#define __ASM_SH_ILSEL_H + +typedef enum { + ILSEL_NONE, + ILSEL_LAN, + ILSEL_USBH_I, + ILSEL_USBH_S, + ILSEL_USBH_V, + ILSEL_RTC, + ILSEL_USBP_I, + ILSEL_USBP_S, + ILSEL_USBP_V, + ILSEL_KEY, + + /* + * ILSEL Aliases - corner cases for interleaved level tables. + * + * Someone thought this was a good idea and less hassle than + * demuxing a shared vector, really. + */ + + /* ILSEL0 and 2 */ + ILSEL_FPGA0, + ILSEL_FPGA1, + ILSEL_EX1, + ILSEL_EX2, + ILSEL_EX3, + ILSEL_EX4, + + /* ILSEL1 and 3 */ + ILSEL_FPGA2 = ILSEL_FPGA0, + ILSEL_FPGA3 = ILSEL_FPGA1, + ILSEL_EX5 = ILSEL_EX1, + ILSEL_EX6 = ILSEL_EX2, + ILSEL_EX7 = ILSEL_EX3, + ILSEL_EX8 = ILSEL_EX4, +} ilsel_source_t; + +/* arch/sh/boards/renesas/x3proto/ilsel.c */ +int ilsel_enable(ilsel_source_t set); +int ilsel_enable_fixed(ilsel_source_t set, unsigned int level); +void ilsel_disable(unsigned int irq); + +#endif /* __ASM_SH_ILSEL_H */ diff --git a/arch/sh/include/asm/io.h b/arch/sh/include/asm/io.h new file mode 100644 index 00000000000..a4fbf0c84fb --- /dev/null +++ b/arch/sh/include/asm/io.h @@ -0,0 +1,366 @@ +#ifndef __ASM_SH_IO_H +#define __ASM_SH_IO_H + +/* + * Convention: + * read{b,w,l}/write{b,w,l} are for PCI, + * while in{b,w,l}/out{b,w,l} are for ISA + * These may (will) be platform specific function. + * In addition we have 'pausing' versions: in{b,w,l}_p/out{b,w,l}_p + * and 'string' versions: ins{b,w,l}/outs{b,w,l} + * For read{b,w,l} and write{b,w,l} there are also __raw versions, which + * do not have a memory barrier after them. + * + * In addition, we have + * ctrl_in{b,w,l}/ctrl_out{b,w,l} for SuperH specific I/O. + * which are processor specific. + */ + +/* + * We follow the Alpha convention here: + * __inb expands to an inline function call (which calls via the mv) + * _inb is a real function call (note ___raw fns are _ version of __raw) + * inb by default expands to _inb, but the machine specific code may + * define it to __inb if it chooses. + */ +#include +#include +#include +#include +#include +#include + +#ifdef __KERNEL__ + +/* + * Depending on which platform we are running on, we need different + * I/O functions. + */ +#define __IO_PREFIX generic +#include +#include + +#define maybebadio(port) \ + printk(KERN_ERR "bad PC-like io %s:%u for port 0x%lx at 0x%08x\n", \ + __FUNCTION__, __LINE__, (port), (u32)__builtin_return_address(0)) + +/* + * Since boards are able to define their own set of I/O routines through + * their respective machine vector, we always wrap through the mv. + * + * Also, in the event that a board hasn't provided its own definition for + * a given routine, it will be wrapped to generic code at run-time. + */ + +#define __inb(p) sh_mv.mv_inb((p)) +#define __inw(p) sh_mv.mv_inw((p)) +#define __inl(p) sh_mv.mv_inl((p)) +#define __outb(x,p) sh_mv.mv_outb((x),(p)) +#define __outw(x,p) sh_mv.mv_outw((x),(p)) +#define __outl(x,p) sh_mv.mv_outl((x),(p)) + +#define __inb_p(p) sh_mv.mv_inb_p((p)) +#define __inw_p(p) sh_mv.mv_inw_p((p)) +#define __inl_p(p) sh_mv.mv_inl_p((p)) +#define __outb_p(x,p) sh_mv.mv_outb_p((x),(p)) +#define __outw_p(x,p) sh_mv.mv_outw_p((x),(p)) +#define __outl_p(x,p) sh_mv.mv_outl_p((x),(p)) + +#define __insb(p,b,c) sh_mv.mv_insb((p), (b), (c)) +#define __insw(p,b,c) sh_mv.mv_insw((p), (b), (c)) +#define __insl(p,b,c) sh_mv.mv_insl((p), (b), (c)) +#define __outsb(p,b,c) sh_mv.mv_outsb((p), (b), (c)) +#define __outsw(p,b,c) sh_mv.mv_outsw((p), (b), (c)) +#define __outsl(p,b,c) sh_mv.mv_outsl((p), (b), (c)) + +#define __readb(a) sh_mv.mv_readb((a)) +#define __readw(a) sh_mv.mv_readw((a)) +#define __readl(a) sh_mv.mv_readl((a)) +#define __writeb(v,a) sh_mv.mv_writeb((v),(a)) +#define __writew(v,a) sh_mv.mv_writew((v),(a)) +#define __writel(v,a) sh_mv.mv_writel((v),(a)) + +#define inb __inb +#define inw __inw +#define inl __inl +#define outb __outb +#define outw __outw +#define outl __outl + +#define inb_p __inb_p +#define inw_p __inw_p +#define inl_p __inl_p +#define outb_p __outb_p +#define outw_p __outw_p +#define outl_p __outl_p + +#define insb __insb +#define insw __insw +#define insl __insl +#define outsb __outsb +#define outsw __outsw +#define outsl __outsl + +#define __raw_readb(a) __readb((void __iomem *)(a)) +#define __raw_readw(a) __readw((void __iomem *)(a)) +#define __raw_readl(a) __readl((void __iomem *)(a)) +#define __raw_writeb(v, a) __writeb(v, (void __iomem *)(a)) +#define __raw_writew(v, a) __writew(v, (void __iomem *)(a)) +#define __raw_writel(v, a) __writel(v, (void __iomem *)(a)) + +void __raw_writesl(unsigned long addr, const void *data, int longlen); +void __raw_readsl(unsigned long addr, void *data, int longlen); + +/* + * The platform header files may define some of these macros to use + * the inlined versions where appropriate. These macros may also be + * redefined by userlevel programs. + */ +#ifdef __readb +# define readb(a) ({ unsigned int r_ = __raw_readb(a); mb(); r_; }) +#endif +#ifdef __raw_readw +# define readw(a) ({ unsigned int r_ = __raw_readw(a); mb(); r_; }) +#endif +#ifdef __raw_readl +# define readl(a) ({ unsigned int r_ = __raw_readl(a); mb(); r_; }) +#endif + +#ifdef __raw_writeb +# define writeb(v,a) ({ __raw_writeb((v),(a)); mb(); }) +#endif +#ifdef __raw_writew +# define writew(v,a) ({ __raw_writew((v),(a)); mb(); }) +#endif +#ifdef __raw_writel +# define writel(v,a) ({ __raw_writel((v),(a)); mb(); }) +#endif + +#define __BUILD_MEMORY_STRING(bwlq, type) \ + \ +static inline void writes##bwlq(volatile void __iomem *mem, \ + const void *addr, unsigned int count) \ +{ \ + const volatile type *__addr = addr; \ + \ + while (count--) { \ + __raw_write##bwlq(*__addr, mem); \ + __addr++; \ + } \ +} \ + \ +static inline void reads##bwlq(volatile void __iomem *mem, void *addr, \ + unsigned int count) \ +{ \ + volatile type *__addr = addr; \ + \ + while (count--) { \ + *__addr = __raw_read##bwlq(mem); \ + __addr++; \ + } \ +} + +__BUILD_MEMORY_STRING(b, u8) +__BUILD_MEMORY_STRING(w, u16) +#define writesl __raw_writesl +#define readsl __raw_readsl + +#define readb_relaxed(a) readb(a) +#define readw_relaxed(a) readw(a) +#define readl_relaxed(a) readl(a) + +/* Simple MMIO */ +#define ioread8(a) readb(a) +#define ioread16(a) readw(a) +#define ioread16be(a) be16_to_cpu(__raw_readw((a))) +#define ioread32(a) readl(a) +#define ioread32be(a) be32_to_cpu(__raw_readl((a))) + +#define iowrite8(v,a) writeb((v),(a)) +#define iowrite16(v,a) writew((v),(a)) +#define iowrite16be(v,a) __raw_writew(cpu_to_be16((v)),(a)) +#define iowrite32(v,a) writel((v),(a)) +#define iowrite32be(v,a) __raw_writel(cpu_to_be32((v)),(a)) + +#define ioread8_rep(a, d, c) readsb((a), (d), (c)) +#define ioread16_rep(a, d, c) readsw((a), (d), (c)) +#define ioread32_rep(a, d, c) readsl((a), (d), (c)) + +#define iowrite8_rep(a, s, c) writesb((a), (s), (c)) +#define iowrite16_rep(a, s, c) writesw((a), (s), (c)) +#define iowrite32_rep(a, s, c) writesl((a), (s), (c)) + +#define mmiowb() wmb() /* synco on SH-4A, otherwise a nop */ + +#define IO_SPACE_LIMIT 0xffffffff + +/* + * This function provides a method for the generic case where a board-specific + * ioport_map simply needs to return the port + some arbitrary port base. + * + * We use this at board setup time to implicitly set the port base, and + * as a result, we can use the generic ioport_map. + */ +static inline void __set_io_port_base(unsigned long pbase) +{ + extern unsigned long generic_io_base; + + generic_io_base = pbase; +} + +#define __ioport_map(p, n) sh_mv.mv_ioport_map((p), (n)) + +/* We really want to try and get these to memcpy etc */ +extern void memcpy_fromio(void *, volatile void __iomem *, unsigned long); +extern void memcpy_toio(volatile void __iomem *, const void *, unsigned long); +extern void memset_io(volatile void __iomem *, int, unsigned long); + +/* SuperH on-chip I/O functions */ +static inline unsigned char ctrl_inb(unsigned long addr) +{ + return *(volatile unsigned char*)addr; +} + +static inline unsigned short ctrl_inw(unsigned long addr) +{ + return *(volatile unsigned short*)addr; +} + +static inline unsigned int ctrl_inl(unsigned long addr) +{ + return *(volatile unsigned long*)addr; +} + +static inline unsigned long long ctrl_inq(unsigned long addr) +{ + return *(volatile unsigned long long*)addr; +} + +static inline void ctrl_outb(unsigned char b, unsigned long addr) +{ + *(volatile unsigned char*)addr = b; +} + +static inline void ctrl_outw(unsigned short b, unsigned long addr) +{ + *(volatile unsigned short*)addr = b; +} + +static inline void ctrl_outl(unsigned int b, unsigned long addr) +{ + *(volatile unsigned long*)addr = b; +} + +static inline void ctrl_outq(unsigned long long b, unsigned long addr) +{ + *(volatile unsigned long long*)addr = b; +} + +static inline void ctrl_delay(void) +{ +#ifdef P2SEG + ctrl_inw(P2SEG); +#endif +} + +/* Quad-word real-mode I/O, don't ask.. */ +unsigned long long peek_real_address_q(unsigned long long addr); +unsigned long long poke_real_address_q(unsigned long long addr, + unsigned long long val); + +#if !defined(CONFIG_MMU) +#define virt_to_phys(address) ((unsigned long)(address)) +#define phys_to_virt(address) ((void *)(address)) +#else +#define virt_to_phys(address) (__pa(address)) +#define phys_to_virt(address) (__va(address)) +#endif + +/* + * On 32-bit SH, we traditionally have the whole physical address space + * mapped at all times (as MIPS does), so "ioremap()" and "iounmap()" do + * not need to do anything but place the address in the proper segment. + * This is true for P1 and P2 addresses, as well as some P3 ones. + * However, most of the P3 addresses and newer cores using extended + * addressing need to map through page tables, so the ioremap() + * implementation becomes a bit more complicated. + * + * See arch/sh/mm/ioremap.c for additional notes on this. + * + * We cheat a bit and always return uncachable areas until we've fixed + * the drivers to handle caching properly. + * + * On the SH-5 the concept of segmentation in the 1:1 PXSEG sense simply + * doesn't exist, so everything must go through page tables. + */ +#ifdef CONFIG_MMU +void __iomem *__ioremap(unsigned long offset, unsigned long size, + unsigned long flags); +void __iounmap(void __iomem *addr); + +/* arch/sh/mm/ioremap_64.c */ +unsigned long onchip_remap(unsigned long addr, unsigned long size, + const char *name); +extern void onchip_unmap(unsigned long vaddr); +#else +#define __ioremap(offset, size, flags) ((void __iomem *)(offset)) +#define __iounmap(addr) do { } while (0) +#define onchip_remap(addr, size, name) (addr) +#define onchip_unmap(addr) do { } while (0) +#endif /* CONFIG_MMU */ + +static inline void __iomem * +__ioremap_mode(unsigned long offset, unsigned long size, unsigned long flags) +{ +#ifdef CONFIG_SUPERH32 + unsigned long last_addr = offset + size - 1; +#endif + void __iomem *ret; + + ret = __ioremap_trapped(offset, size); + if (ret) + return ret; + +#ifdef CONFIG_SUPERH32 + /* + * For P1 and P2 space this is trivial, as everything is already + * mapped. Uncached access for P1 addresses are done through P2. + * In the P3 case or for addresses outside of the 29-bit space, + * mapping must be done by the PMB or by using page tables. + */ + if (likely(PXSEG(offset) < P3SEG && PXSEG(last_addr) < P3SEG)) { + if (unlikely(flags & _PAGE_CACHABLE)) + return (void __iomem *)P1SEGADDR(offset); + + return (void __iomem *)P2SEGADDR(offset); + } +#endif + + return __ioremap(offset, size, flags); +} + +#define ioremap(offset, size) \ + __ioremap_mode((offset), (size), 0) +#define ioremap_nocache(offset, size) \ + __ioremap_mode((offset), (size), 0) +#define ioremap_cache(offset, size) \ + __ioremap_mode((offset), (size), _PAGE_CACHABLE) +#define p3_ioremap(offset, size, flags) \ + __ioremap((offset), (size), (flags)) +#define iounmap(addr) \ + __iounmap((addr)) + +/* + * Convert a physical pointer to a virtual kernel pointer for /dev/mem + * access + */ +#define xlate_dev_mem_ptr(p) __va(p) + +/* + * Convert a virtual cached pointer to an uncached pointer + */ +#define xlate_dev_kmem_ptr(p) p + +#endif /* __KERNEL__ */ + +#endif /* __ASM_SH_IO_H */ diff --git a/arch/sh/include/asm/io_generic.h b/arch/sh/include/asm/io_generic.h new file mode 100644 index 00000000000..92fc6070d7b --- /dev/null +++ b/arch/sh/include/asm/io_generic.h @@ -0,0 +1,49 @@ +/* + * Trivial I/O routine definitions, intentionally meant to be included + * multiple times. Ugly I/O routine concatenation helpers taken from + * alpha. Must be included _before_ io.h to avoid preprocessor-induced + * routine mismatch. + */ +#define IO_CONCAT(a,b) _IO_CONCAT(a,b) +#define _IO_CONCAT(a,b) a ## _ ## b + +#ifndef __IO_PREFIX +#error "Don't include this header without a valid system prefix" +#endif + +u8 IO_CONCAT(__IO_PREFIX,inb)(unsigned long); +u16 IO_CONCAT(__IO_PREFIX,inw)(unsigned long); +u32 IO_CONCAT(__IO_PREFIX,inl)(unsigned long); + +void IO_CONCAT(__IO_PREFIX,outb)(u8, unsigned long); +void IO_CONCAT(__IO_PREFIX,outw)(u16, unsigned long); +void IO_CONCAT(__IO_PREFIX,outl)(u32, unsigned long); + +u8 IO_CONCAT(__IO_PREFIX,inb_p)(unsigned long); +u16 IO_CONCAT(__IO_PREFIX,inw_p)(unsigned long); +u32 IO_CONCAT(__IO_PREFIX,inl_p)(unsigned long); +void IO_CONCAT(__IO_PREFIX,outb_p)(u8, unsigned long); +void IO_CONCAT(__IO_PREFIX,outw_p)(u16, unsigned long); +void IO_CONCAT(__IO_PREFIX,outl_p)(u32, unsigned long); + +void IO_CONCAT(__IO_PREFIX,insb)(unsigned long, void *dst, unsigned long count); +void IO_CONCAT(__IO_PREFIX,insw)(unsigned long, void *dst, unsigned long count); +void IO_CONCAT(__IO_PREFIX,insl)(unsigned long, void *dst, unsigned long count); +void IO_CONCAT(__IO_PREFIX,outsb)(unsigned long, const void *src, unsigned long count); +void IO_CONCAT(__IO_PREFIX,outsw)(unsigned long, const void *src, unsigned long count); +void IO_CONCAT(__IO_PREFIX,outsl)(unsigned long, const void *src, unsigned long count); + +u8 IO_CONCAT(__IO_PREFIX,readb)(void __iomem *); +u16 IO_CONCAT(__IO_PREFIX,readw)(void __iomem *); +u32 IO_CONCAT(__IO_PREFIX,readl)(void __iomem *); +void IO_CONCAT(__IO_PREFIX,writeb)(u8, void __iomem *); +void IO_CONCAT(__IO_PREFIX,writew)(u16, void __iomem *); +void IO_CONCAT(__IO_PREFIX,writel)(u32, void __iomem *); + +void *IO_CONCAT(__IO_PREFIX,ioremap)(unsigned long offset, unsigned long size); +void IO_CONCAT(__IO_PREFIX,iounmap)(void *addr); + +void __iomem *IO_CONCAT(__IO_PREFIX,ioport_map)(unsigned long addr, unsigned int size); +void IO_CONCAT(__IO_PREFIX,ioport_unmap)(void __iomem *addr); + +#undef __IO_PREFIX diff --git a/arch/sh/include/asm/io_trapped.h b/arch/sh/include/asm/io_trapped.h new file mode 100644 index 00000000000..f1251d4f0ba --- /dev/null +++ b/arch/sh/include/asm/io_trapped.h @@ -0,0 +1,58 @@ +#ifndef __ASM_SH_IO_TRAPPED_H +#define __ASM_SH_IO_TRAPPED_H + +#include +#include +#include + +#define IO_TRAPPED_MAGIC 0xfeedbeef + +struct trapped_io { + unsigned int magic; + struct resource *resource; + unsigned int num_resources; + unsigned int minimum_bus_width; + struct list_head list; + void __iomem *virt_base; +} __aligned(PAGE_SIZE); + +#ifdef CONFIG_IO_TRAPPED +int register_trapped_io(struct trapped_io *tiop); +int handle_trapped_io(struct pt_regs *regs, unsigned long address); + +void __iomem *match_trapped_io_handler(struct list_head *list, + unsigned long offset, + unsigned long size); + +#ifdef CONFIG_HAS_IOMEM +extern struct list_head trapped_mem; + +static inline void __iomem * +__ioremap_trapped(unsigned long offset, unsigned long size) +{ + return match_trapped_io_handler(&trapped_mem, offset, size); +} +#else +#define __ioremap_trapped(offset, size) NULL +#endif + +#ifdef CONFIG_HAS_IOPORT +extern struct list_head trapped_io; + +static inline void __iomem * +__ioport_map_trapped(unsigned long offset, unsigned long size) +{ + return match_trapped_io_handler(&trapped_io, offset, size); +} +#else +#define __ioport_map_trapped(offset, size) NULL +#endif + +#else +#define register_trapped_io(tiop) (-1) +#define handle_trapped_io(tiop, address) 0 +#define __ioremap_trapped(offset, size) NULL +#define __ioport_map_trapped(offset, size) NULL +#endif + +#endif /* __ASM_SH_IO_TRAPPED_H */ diff --git a/arch/sh/include/asm/ioctl.h b/arch/sh/include/asm/ioctl.h new file mode 100644 index 00000000000..b279fe06dfe --- /dev/null +++ b/arch/sh/include/asm/ioctl.h @@ -0,0 +1 @@ +#include diff --git a/arch/sh/include/asm/ioctls.h b/arch/sh/include/asm/ioctls.h new file mode 100644 index 00000000000..c212c371a4a --- /dev/null +++ b/arch/sh/include/asm/ioctls.h @@ -0,0 +1,103 @@ +#ifndef __ASM_SH_IOCTLS_H +#define __ASM_SH_IOCTLS_H + +#include + +#define FIOCLEX _IO('f', 1) +#define FIONCLEX _IO('f', 2) +#define FIOASYNC _IOW('f', 125, int) +#define FIONBIO _IOW('f', 126, int) +#define FIONREAD _IOR('f', 127, int) +#define TIOCINQ FIONREAD +#define FIOQSIZE _IOR('f', 128, loff_t) + +#define TCGETS 0x5401 +#define TCSETS 0x5402 +#define TCSETSW 0x5403 +#define TCSETSF 0x5404 + +#define TCGETA 0x80127417 /* _IOR('t', 23, struct termio) */ +#define TCSETA 0x40127418 /* _IOW('t', 24, struct termio) */ +#define TCSETAW 0x40127419 /* _IOW('t', 25, struct termio) */ +#define TCSETAF 0x4012741C /* _IOW('t', 28, struct termio) */ + +#define TCSBRK _IO('t', 29) +#define TCXONC _IO('t', 30) +#define TCFLSH _IO('t', 31) + +#define TIOCSWINSZ 0x40087467 /* _IOW('t', 103, struct winsize) */ +#define TIOCGWINSZ 0x80087468 /* _IOR('t', 104, struct winsize) */ +#define TIOCSTART _IO('t', 110) /* start output, like ^Q */ +#define TIOCSTOP _IO('t', 111) /* stop output, like ^S */ +#define TIOCOUTQ _IOR('t', 115, int) /* output queue size */ + +#define TIOCSPGRP _IOW('t', 118, int) +#define TIOCGPGRP _IOR('t', 119, int) + +#define TIOCEXCL _IO('T', 12) /* 0x540C */ +#define TIOCNXCL _IO('T', 13) /* 0x540D */ +#define TIOCSCTTY _IO('T', 14) /* 0x540E */ + +#define TIOCSTI _IOW('T', 18, char) /* 0x5412 */ +#define TIOCMGET _IOR('T', 21, unsigned int) /* 0x5415 */ +#define TIOCMBIS _IOW('T', 22, unsigned int) /* 0x5416 */ +#define TIOCMBIC _IOW('T', 23, unsigned int) /* 0x5417 */ +#define TIOCMSET _IOW('T', 24, unsigned int) /* 0x5418 */ +# define TIOCM_LE 0x001 +# define TIOCM_DTR 0x002 +# define TIOCM_RTS 0x004 +# define TIOCM_ST 0x008 +# define TIOCM_SR 0x010 +# define TIOCM_CTS 0x020 +# define TIOCM_CAR 0x040 +# define TIOCM_RNG 0x080 +# define TIOCM_DSR 0x100 +# define TIOCM_CD TIOCM_CAR +# define TIOCM_RI TIOCM_RNG + +#define TIOCGSOFTCAR _IOR('T', 25, unsigned int) /* 0x5419 */ +#define TIOCSSOFTCAR _IOW('T', 26, unsigned int) /* 0x541A */ +#define TIOCLINUX _IOW('T', 28, char) /* 0x541C */ +#define TIOCCONS _IO('T', 29) /* 0x541D */ +#define TIOCGSERIAL 0x803C541E /* _IOR('T', 30, struct serial_struct) 0x541E */ +#define TIOCSSERIAL 0x403C541F /* _IOW('T', 31, struct serial_struct) 0x541F */ +#define TIOCPKT _IOW('T', 32, int) /* 0x5420 */ +# define TIOCPKT_DATA 0 +# define TIOCPKT_FLUSHREAD 1 +# define TIOCPKT_FLUSHWRITE 2 +# define TIOCPKT_STOP 4 +# define TIOCPKT_START 8 +# define TIOCPKT_NOSTOP 16 +# define TIOCPKT_DOSTOP 32 + + +#define TIOCNOTTY _IO('T', 34) /* 0x5422 */ +#define TIOCSETD _IOW('T', 35, int) /* 0x5423 */ +#define TIOCGETD _IOR('T', 36, int) /* 0x5424 */ +#define TCSBRKP _IOW('T', 37, int) /* 0x5425 */ /* Needed for POSIX tcsendbreak() */ +#define TIOCSBRK _IO('T', 39) /* 0x5427 */ /* BSD compatibility */ +#define TIOCCBRK _IO('T', 40) /* 0x5428 */ /* BSD compatibility */ +#define TIOCGSID _IOR('T', 41, pid_t) /* 0x5429 */ /* Return the session ID of FD */ +#define TCGETS2 _IOR('T', 42, struct termios2) +#define TCSETS2 _IOW('T', 43, struct termios2) +#define TCSETSW2 _IOW('T', 44, struct termios2) +#define TCSETSF2 _IOW('T', 45, struct termios2) +#define TIOCGPTN _IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */ +#define TIOCSPTLCK _IOW('T',0x31, int) /* Lock/unlock Pty */ + +#define TIOCSERCONFIG _IO('T', 83) /* 0x5453 */ +#define TIOCSERGWILD _IOR('T', 84, int) /* 0x5454 */ +#define TIOCSERSWILD _IOW('T', 85, int) /* 0x5455 */ +#define TIOCGLCKTRMIOS 0x5456 +#define TIOCSLCKTRMIOS 0x5457 +#define TIOCSERGSTRUCT 0x80d85458 /* _IOR('T', 88, struct async_struct) 0x5458 */ /* For debugging only */ +#define TIOCSERGETLSR _IOR('T', 89, unsigned int) /* 0x5459 */ /* Get line status register */ + /* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */ +# define TIOCSER_TEMT 0x01 /* Transmitter physically empty */ +#define TIOCSERGETMULTI 0x80A8545A /* _IOR('T', 90, struct serial_multiport_struct) 0x545A */ /* Get multiport config */ +#define TIOCSERSETMULTI 0x40A8545B /* _IOW('T', 91, struct serial_multiport_struct) 0x545B */ /* Set multiport config */ + +#define TIOCMIWAIT _IO('T', 92) /* 0x545C */ /* wait for a change on serial input line(s) */ +#define TIOCGICOUNT 0x545D /* read serial port inline interrupt counts */ + +#endif /* __ASM_SH_IOCTLS_H */ diff --git a/arch/sh/include/asm/ipcbuf.h b/arch/sh/include/asm/ipcbuf.h new file mode 100644 index 00000000000..5ffc9972a7e --- /dev/null +++ b/arch/sh/include/asm/ipcbuf.h @@ -0,0 +1,29 @@ +#ifndef __ASM_SH_IPCBUF_H__ +#define __ASM_SH_IPCBUF_H__ + +/* + * The ipc64_perm structure for i386 architecture. + * Note extra padding because this structure is passed back and forth + * between kernel and user space. + * + * Pad space is left for: + * - 32-bit mode_t and seq + * - 2 miscellaneous 32-bit values + */ + +struct ipc64_perm +{ + __kernel_key_t key; + __kernel_uid32_t uid; + __kernel_gid32_t gid; + __kernel_uid32_t cuid; + __kernel_gid32_t cgid; + __kernel_mode_t mode; + unsigned short __pad1; + unsigned short seq; + unsigned short __pad2; + unsigned long __unused1; + unsigned long __unused2; +}; + +#endif /* __ASM_SH_IPCBUF_H__ */ diff --git a/arch/sh/include/asm/irq.h b/arch/sh/include/asm/irq.h new file mode 100644 index 00000000000..6195a531c1b --- /dev/null +++ b/arch/sh/include/asm/irq.h @@ -0,0 +1,57 @@ +#ifndef __ASM_SH_IRQ_H +#define __ASM_SH_IRQ_H + +#include + +/* + * A sane default based on a reasonable vector table size, platforms are + * advised to cap this at the hard limit that they're interested in + * through the machvec. + */ +#define NR_IRQS 256 + +/* + * Convert back and forth between INTEVT and IRQ values. + */ +#ifdef CONFIG_CPU_HAS_INTEVT +#define evt2irq(evt) (((evt) >> 5) - 16) +#define irq2evt(irq) (((irq) + 16) << 5) +#else +#define evt2irq(evt) (evt) +#define irq2evt(irq) (irq) +#endif + +/* + * Simple Mask Register Support + */ +extern void make_maskreg_irq(unsigned int irq); +extern unsigned short *irq_mask_register; + +/* + * PINT IRQs + */ +void init_IRQ_pint(void); +void make_imask_irq(unsigned int irq); + +static inline int generic_irq_demux(int irq) +{ + return irq; +} + +#define irq_canonicalize(irq) (irq) +#define irq_demux(irq) sh_mv.mv_irq_demux(irq) + +#ifdef CONFIG_IRQSTACKS +extern void irq_ctx_init(int cpu); +extern void irq_ctx_exit(int cpu); +# define __ARCH_HAS_DO_SOFTIRQ +#else +# define irq_ctx_init(cpu) do { } while (0) +# define irq_ctx_exit(cpu) do { } while (0) +#endif + +#ifdef CONFIG_CPU_SH5 +#include +#endif + +#endif /* __ASM_SH_IRQ_H */ diff --git a/arch/sh/include/asm/irq_regs.h b/arch/sh/include/asm/irq_regs.h new file mode 100644 index 00000000000..3dd9c0b7027 --- /dev/null +++ b/arch/sh/include/asm/irq_regs.h @@ -0,0 +1 @@ +#include diff --git a/arch/sh/include/asm/irqflags.h b/arch/sh/include/asm/irqflags.h new file mode 100644 index 00000000000..46e71da5be6 --- /dev/null +++ b/arch/sh/include/asm/irqflags.h @@ -0,0 +1,34 @@ +#ifndef __ASM_SH_IRQFLAGS_H +#define __ASM_SH_IRQFLAGS_H + +#ifdef CONFIG_SUPERH32 +#include "irqflags_32.h" +#else +#include "irqflags_64.h" +#endif + +#define raw_local_save_flags(flags) \ + do { (flags) = __raw_local_save_flags(); } while (0) + +static inline int raw_irqs_disabled_flags(unsigned long flags) +{ + return (flags != 0); +} + +static inline int raw_irqs_disabled(void) +{ + unsigned long flags = __raw_local_save_flags(); + + return raw_irqs_disabled_flags(flags); +} + +#define raw_local_irq_save(flags) \ + do { (flags) = __raw_local_irq_save(); } while (0) + +static inline void raw_local_irq_restore(unsigned long flags) +{ + if ((flags & 0xf0) != 0xf0) + raw_local_irq_enable(); +} + +#endif /* __ASM_SH_IRQFLAGS_H */ diff --git a/arch/sh/include/asm/irqflags_32.h b/arch/sh/include/asm/irqflags_32.h new file mode 100644 index 00000000000..60218f54134 --- /dev/null +++ b/arch/sh/include/asm/irqflags_32.h @@ -0,0 +1,99 @@ +#ifndef __ASM_SH_IRQFLAGS_32_H +#define __ASM_SH_IRQFLAGS_32_H + +static inline void raw_local_irq_enable(void) +{ + unsigned long __dummy0, __dummy1; + + __asm__ __volatile__ ( + "stc sr, %0\n\t" + "and %1, %0\n\t" +#ifdef CONFIG_CPU_HAS_SR_RB + "stc r6_bank, %1\n\t" + "or %1, %0\n\t" +#endif + "ldc %0, sr\n\t" + : "=&r" (__dummy0), "=r" (__dummy1) + : "1" (~0x000000f0) + : "memory" + ); +} + +static inline void raw_local_irq_disable(void) +{ + unsigned long flags; + + __asm__ __volatile__ ( + "stc sr, %0\n\t" + "or #0xf0, %0\n\t" + "ldc %0, sr\n\t" + : "=&z" (flags) + : /* no inputs */ + : "memory" + ); +} + +static inline void set_bl_bit(void) +{ + unsigned long __dummy0, __dummy1; + + __asm__ __volatile__ ( + "stc sr, %0\n\t" + "or %2, %0\n\t" + "and %3, %0\n\t" + "ldc %0, sr\n\t" + : "=&r" (__dummy0), "=r" (__dummy1) + : "r" (0x10000000), "r" (0xffffff0f) + : "memory" + ); +} + +static inline void clear_bl_bit(void) +{ + unsigned long __dummy0, __dummy1; + + __asm__ __volatile__ ( + "stc sr, %0\n\t" + "and %2, %0\n\t" + "ldc %0, sr\n\t" + : "=&r" (__dummy0), "=r" (__dummy1) + : "1" (~0x10000000) + : "memory" + ); +} + +static inline unsigned long __raw_local_save_flags(void) +{ + unsigned long flags; + + __asm__ __volatile__ ( + "stc sr, %0\n\t" + "and #0xf0, %0\n\t" + : "=&z" (flags) + : /* no inputs */ + : "memory" + ); + + return flags; +} + +static inline unsigned long __raw_local_irq_save(void) +{ + unsigned long flags, __dummy; + + __asm__ __volatile__ ( + "stc sr, %1\n\t" + "mov %1, %0\n\t" + "or #0xf0, %0\n\t" + "ldc %0, sr\n\t" + "mov %1, %0\n\t" + "and #0xf0, %0\n\t" + : "=&z" (flags), "=&r" (__dummy) + : /* no inputs */ + : "memory" + ); + + return flags; +} + +#endif /* __ASM_SH_IRQFLAGS_32_H */ diff --git a/arch/sh/include/asm/irqflags_64.h b/arch/sh/include/asm/irqflags_64.h new file mode 100644 index 00000000000..88f65222c1d --- /dev/null +++ b/arch/sh/include/asm/irqflags_64.h @@ -0,0 +1,85 @@ +#ifndef __ASM_SH_IRQFLAGS_64_H +#define __ASM_SH_IRQFLAGS_64_H + +#include + +#define SR_MASK_LL 0x00000000000000f0LL +#define SR_BL_LL 0x0000000010000000LL + +static inline void raw_local_irq_enable(void) +{ + unsigned long long __dummy0, __dummy1 = ~SR_MASK_LL; + + __asm__ __volatile__("getcon " __SR ", %0\n\t" + "and %0, %1, %0\n\t" + "putcon %0, " __SR "\n\t" + : "=&r" (__dummy0) + : "r" (__dummy1)); +} + +static inline void raw_local_irq_disable(void) +{ + unsigned long long __dummy0, __dummy1 = SR_MASK_LL; + + __asm__ __volatile__("getcon " __SR ", %0\n\t" + "or %0, %1, %0\n\t" + "putcon %0, " __SR "\n\t" + : "=&r" (__dummy0) + : "r" (__dummy1)); +} + +static inline void set_bl_bit(void) +{ + unsigned long long __dummy0, __dummy1 = SR_BL_LL; + + __asm__ __volatile__("getcon " __SR ", %0\n\t" + "or %0, %1, %0\n\t" + "putcon %0, " __SR "\n\t" + : "=&r" (__dummy0) + : "r" (__dummy1)); + +} + +static inline void clear_bl_bit(void) +{ + unsigned long long __dummy0, __dummy1 = ~SR_BL_LL; + + __asm__ __volatile__("getcon " __SR ", %0\n\t" + "and %0, %1, %0\n\t" + "putcon %0, " __SR "\n\t" + : "=&r" (__dummy0) + : "r" (__dummy1)); +} + +static inline unsigned long __raw_local_save_flags(void) +{ + unsigned long long __dummy = SR_MASK_LL; + unsigned long flags; + + __asm__ __volatile__ ( + "getcon " __SR ", %0\n\t" + "and %0, %1, %0" + : "=&r" (flags) + : "r" (__dummy)); + + return flags; +} + +static inline unsigned long __raw_local_irq_save(void) +{ + unsigned long long __dummy0, __dummy1 = SR_MASK_LL; + unsigned long flags; + + __asm__ __volatile__ ( + "getcon " __SR ", %1\n\t" + "or %1, r63, %0\n\t" + "or %1, %2, %1\n\t" + "putcon %1, " __SR "\n\t" + "and %0, %2, %0" + : "=&r" (flags), "=&r" (__dummy0) + : "r" (__dummy1)); + + return flags; +} + +#endif /* __ASM_SH_IRQFLAGS_64_H */ diff --git a/arch/sh/include/asm/kdebug.h b/arch/sh/include/asm/kdebug.h new file mode 100644 index 00000000000..49cd69051a8 --- /dev/null +++ b/arch/sh/include/asm/kdebug.h @@ -0,0 +1,9 @@ +#ifndef __ASM_SH_KDEBUG_H +#define __ASM_SH_KDEBUG_H + +/* Grossly misnamed. */ +enum die_val { + DIE_TRAP, +}; + +#endif /* __ASM_SH_KDEBUG_H */ diff --git a/arch/sh/include/asm/kexec.h b/arch/sh/include/asm/kexec.h new file mode 100644 index 00000000000..00f4260ef09 --- /dev/null +++ b/arch/sh/include/asm/kexec.h @@ -0,0 +1,62 @@ +#ifndef __ASM_SH_KEXEC_H +#define __ASM_SH_KEXEC_H + +#include +#include + +/* + * KEXEC_SOURCE_MEMORY_LIMIT maximum page get_free_page can return. + * I.e. Maximum page that is mapped directly into kernel memory, + * and kmap is not required. + * + * Someone correct me if FIXADDR_START - PAGEOFFSET is not the correct + * calculation for the amount of memory directly mappable into the + * kernel memory space. + */ + +/* Maximum physical address we can use pages from */ +#define KEXEC_SOURCE_MEMORY_LIMIT (-1UL) +/* Maximum address we can reach in physical address mode */ +#define KEXEC_DESTINATION_MEMORY_LIMIT (-1UL) +/* Maximum address we can use for the control code buffer */ +#define KEXEC_CONTROL_MEMORY_LIMIT TASK_SIZE + +#define KEXEC_CONTROL_CODE_SIZE 4096 + +/* The native architecture */ +#define KEXEC_ARCH KEXEC_ARCH_SH + +static inline void crash_setup_regs(struct pt_regs *newregs, + struct pt_regs *oldregs) +{ + if (oldregs) + memcpy(newregs, oldregs, sizeof(*newregs)); + else { + __asm__ __volatile__ ("mov r0, %0" : "=r" (newregs->regs[0])); + __asm__ __volatile__ ("mov r1, %0" : "=r" (newregs->regs[1])); + __asm__ __volatile__ ("mov r2, %0" : "=r" (newregs->regs[2])); + __asm__ __volatile__ ("mov r3, %0" : "=r" (newregs->regs[3])); + __asm__ __volatile__ ("mov r4, %0" : "=r" (newregs->regs[4])); + __asm__ __volatile__ ("mov r5, %0" : "=r" (newregs->regs[5])); + __asm__ __volatile__ ("mov r6, %0" : "=r" (newregs->regs[6])); + __asm__ __volatile__ ("mov r7, %0" : "=r" (newregs->regs[7])); + __asm__ __volatile__ ("mov r8, %0" : "=r" (newregs->regs[8])); + __asm__ __volatile__ ("mov r9, %0" : "=r" (newregs->regs[9])); + __asm__ __volatile__ ("mov r10, %0" : "=r" (newregs->regs[10])); + __asm__ __volatile__ ("mov r11, %0" : "=r" (newregs->regs[11])); + __asm__ __volatile__ ("mov r12, %0" : "=r" (newregs->regs[12])); + __asm__ __volatile__ ("mov r13, %0" : "=r" (newregs->regs[13])); + __asm__ __volatile__ ("mov r14, %0" : "=r" (newregs->regs[14])); + __asm__ __volatile__ ("mov r15, %0" : "=r" (newregs->regs[15])); + + __asm__ __volatile__ ("sts pr, %0" : "=r" (newregs->pr)); + __asm__ __volatile__ ("sts macl, %0" : "=r" (newregs->macl)); + __asm__ __volatile__ ("sts mach, %0" : "=r" (newregs->mach)); + + __asm__ __volatile__ ("stc gbr, %0" : "=r" (newregs->gbr)); + __asm__ __volatile__ ("stc sr, %0" : "=r" (newregs->sr)); + + newregs->pc = (unsigned long)current_text_addr(); + } +} +#endif /* __ASM_SH_KEXEC_H */ diff --git a/arch/sh/include/asm/kgdb.h b/arch/sh/include/asm/kgdb.h new file mode 100644 index 00000000000..24e42078f36 --- /dev/null +++ b/arch/sh/include/asm/kgdb.h @@ -0,0 +1,69 @@ +/* + * May be copied or modified under the terms of the GNU General Public + * License. See linux/COPYING for more information. + * + * Based on original code by Glenn Engel, Jim Kingdon, + * David Grothe , Tigran Aivazian, and + * Amit S. Kale + * + * Super-H port based on sh-stub.c (Ben Lee and Steve Chamberlain) by + * Henry Bell + * + * Header file for low-level support for remote debug using GDB. + * + */ + +#ifndef __KGDB_H +#define __KGDB_H + +#include + +/* Same as pt_regs but has vbr in place of syscall_nr */ +struct kgdb_regs { + unsigned long regs[16]; + unsigned long pc; + unsigned long pr; + unsigned long sr; + unsigned long gbr; + unsigned long mach; + unsigned long macl; + unsigned long vbr; +}; + +/* State info */ +extern char kgdb_in_gdb_mode; +extern int kgdb_nofault; /* Ignore bus errors (in gdb mem access) */ +extern char in_nmi; /* Debounce flag to prevent NMI reentry*/ + +/* SCI */ +extern int kgdb_portnum; +extern int kgdb_baud; +extern char kgdb_parity; +extern char kgdb_bits; + +/* Init and interface stuff */ +extern int kgdb_init(void); +extern int (*kgdb_getchar)(void); +extern void (*kgdb_putchar)(int); + +/* Trap functions */ +typedef void (kgdb_debug_hook_t)(struct pt_regs *regs); +typedef void (kgdb_bus_error_hook_t)(void); +extern kgdb_debug_hook_t *kgdb_debug_hook; +extern kgdb_bus_error_hook_t *kgdb_bus_err_hook; + +/* Console */ +struct console; +void kgdb_console_write(struct console *co, const char *s, unsigned count); +extern int kgdb_console_setup(struct console *, char *); + +/* Prototypes for jmp fns */ +#define _JBLEN 9 +typedef int jmp_buf[_JBLEN]; +extern void longjmp(jmp_buf __jmpb, int __retval); +extern int setjmp(jmp_buf __jmpb); + +/* Forced breakpoint */ +#define breakpoint() __asm__ __volatile__("trapa #0x3c") + +#endif diff --git a/arch/sh/include/asm/kmap_types.h b/arch/sh/include/asm/kmap_types.h new file mode 100644 index 00000000000..84d565c696b --- /dev/null +++ b/arch/sh/include/asm/kmap_types.h @@ -0,0 +1,32 @@ +#ifndef __SH_KMAP_TYPES_H +#define __SH_KMAP_TYPES_H + +/* Dummy header just to define km_type. */ + + +#ifdef CONFIG_DEBUG_HIGHMEM +# define D(n) __KM_FENCE_##n , +#else +# define D(n) +#endif + +enum km_type { +D(0) KM_BOUNCE_READ, +D(1) KM_SKB_SUNRPC_DATA, +D(2) KM_SKB_DATA_SOFTIRQ, +D(3) KM_USER0, +D(4) KM_USER1, +D(5) KM_BIO_SRC_IRQ, +D(6) KM_BIO_DST_IRQ, +D(7) KM_PTE0, +D(8) KM_PTE1, +D(9) KM_IRQ0, +D(10) KM_IRQ1, +D(11) KM_SOFTIRQ0, +D(12) KM_SOFTIRQ1, +D(13) KM_TYPE_NR +}; + +#undef D + +#endif diff --git a/arch/sh/include/asm/lboxre2.h b/arch/sh/include/asm/lboxre2.h new file mode 100644 index 00000000000..e6d16050492 --- /dev/null +++ b/arch/sh/include/asm/lboxre2.h @@ -0,0 +1,27 @@ +#ifndef __ASM_SH_LBOXRE2_H +#define __ASM_SH_LBOXRE2_H + +/* + * Copyright (C) 2007 Nobuhiro Iwamatsu + * + * NTT COMWARE L-BOX RE2 support + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + */ + +#define IRQ_CF1 9 /* CF1 */ +#define IRQ_CF0 10 /* CF0 */ +#define IRQ_INTD 11 /* INTD */ +#define IRQ_ETH1 12 /* Ether1 */ +#define IRQ_ETH0 13 /* Ether0 */ +#define IRQ_INTA 14 /* INTA */ + +void init_lboxre2_IRQ(void); + +#define __IO_PREFIX lboxre2 +#include + +#endif /* __ASM_SH_LBOXRE2_H */ diff --git a/arch/sh/include/asm/linkage.h b/arch/sh/include/asm/linkage.h new file mode 100644 index 00000000000..3565a4f4009 --- /dev/null +++ b/arch/sh/include/asm/linkage.h @@ -0,0 +1,7 @@ +#ifndef __ASM_LINKAGE_H +#define __ASM_LINKAGE_H + +#define __ALIGN .balign 4 +#define __ALIGN_STR ".balign 4" + +#endif diff --git a/arch/sh/include/asm/local.h b/arch/sh/include/asm/local.h new file mode 100644 index 00000000000..9ed9b9cb459 --- /dev/null +++ b/arch/sh/include/asm/local.h @@ -0,0 +1,7 @@ +#ifndef __ASM_SH_LOCAL_H +#define __ASM_SH_LOCAL_H + +#include + +#endif /* __ASM_SH_LOCAL_H */ + diff --git a/arch/sh/include/asm/machvec.h b/arch/sh/include/asm/machvec.h new file mode 100644 index 00000000000..b2e4124070a --- /dev/null +++ b/arch/sh/include/asm/machvec.h @@ -0,0 +1,70 @@ +/* + * include/asm-sh/machvec.h + * + * Copyright 2000 Stuart Menefy (stuart.menefy@st.com) + * + * May be copied or modified under the terms of the GNU General Public + * License. See linux/COPYING for more information. + */ + +#ifndef _ASM_SH_MACHVEC_H +#define _ASM_SH_MACHVEC_H + +#include +#include +#include + +struct device; + +struct sh_machine_vector { + void (*mv_setup)(char **cmdline_p); + const char *mv_name; + int mv_nr_irqs; + + u8 (*mv_inb)(unsigned long); + u16 (*mv_inw)(unsigned long); + u32 (*mv_inl)(unsigned long); + void (*mv_outb)(u8, unsigned long); + void (*mv_outw)(u16, unsigned long); + void (*mv_outl)(u32, unsigned long); + + u8 (*mv_inb_p)(unsigned long); + u16 (*mv_inw_p)(unsigned long); + u32 (*mv_inl_p)(unsigned long); + void (*mv_outb_p)(u8, unsigned long); + void (*mv_outw_p)(u16, unsigned long); + void (*mv_outl_p)(u32, unsigned long); + + void (*mv_insb)(unsigned long, void *dst, unsigned long count); + void (*mv_insw)(unsigned long, void *dst, unsigned long count); + void (*mv_insl)(unsigned long, void *dst, unsigned long count); + void (*mv_outsb)(unsigned long, const void *src, unsigned long count); + void (*mv_outsw)(unsigned long, const void *src, unsigned long count); + void (*mv_outsl)(unsigned long, const void *src, unsigned long count); + + u8 (*mv_readb)(void __iomem *); + u16 (*mv_readw)(void __iomem *); + u32 (*mv_readl)(void __iomem *); + void (*mv_writeb)(u8, void __iomem *); + void (*mv_writew)(u16, void __iomem *); + void (*mv_writel)(u32, void __iomem *); + + int (*mv_irq_demux)(int irq); + + void (*mv_init_irq)(void); + void (*mv_init_pci)(void); + + void (*mv_heartbeat)(void); + + void __iomem *(*mv_ioport_map)(unsigned long port, unsigned int size); + void (*mv_ioport_unmap)(void __iomem *); +}; + +extern struct sh_machine_vector sh_mv; + +#define get_system_type() sh_mv.mv_name + +#define __initmv \ + __used __section(.machvec.init) + +#endif /* _ASM_SH_MACHVEC_H */ diff --git a/arch/sh/include/asm/magicpanelr2.h b/arch/sh/include/asm/magicpanelr2.h new file mode 100644 index 00000000000..c644a77ee35 --- /dev/null +++ b/arch/sh/include/asm/magicpanelr2.h @@ -0,0 +1,67 @@ +/* + * include/asm-sh/magicpanelr2.h + * + * Copyright (C) 2007 Markus Brunner, Mark Jonas + * + * I/O addresses and bitmasks for Magic Panel Release 2 board + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#ifndef __ASM_SH_MAGICPANELR2_H +#define __ASM_SH_MAGICPANELR2_H + +#include + +#define __IO_PREFIX mpr2 +#include + + +#define SETBITS_OUTB(mask, reg) ctrl_outb(ctrl_inb(reg) | mask, reg) +#define SETBITS_OUTW(mask, reg) ctrl_outw(ctrl_inw(reg) | mask, reg) +#define SETBITS_OUTL(mask, reg) ctrl_outl(ctrl_inl(reg) | mask, reg) +#define CLRBITS_OUTB(mask, reg) ctrl_outb(ctrl_inb(reg) & ~mask, reg) +#define CLRBITS_OUTW(mask, reg) ctrl_outw(ctrl_inw(reg) & ~mask, reg) +#define CLRBITS_OUTL(mask, reg) ctrl_outl(ctrl_inl(reg) & ~mask, reg) + + +#define PA_LED PORT_PADR /* LED */ + + +/* BSC */ +#define CMNCR 0xA4FD0000UL +#define CS0BCR 0xA4FD0004UL +#define CS2BCR 0xA4FD0008UL +#define CS3BCR 0xA4FD000CUL +#define CS4BCR 0xA4FD0010UL +#define CS5ABCR 0xA4FD0014UL +#define CS5BBCR 0xA4FD0018UL +#define CS6ABCR 0xA4FD001CUL +#define CS6BBCR 0xA4FD0020UL +#define CS0WCR 0xA4FD0024UL +#define CS2WCR 0xA4FD0028UL +#define CS3WCR 0xA4FD002CUL +#define CS4WCR 0xA4FD0030UL +#define CS5AWCR 0xA4FD0034UL +#define CS5BWCR 0xA4FD0038UL +#define CS6AWCR 0xA4FD003CUL +#define CS6BWCR 0xA4FD0040UL + + +/* usb */ + +#define PORT_UTRCTL 0xA405012CUL +#define PORT_UCLKCR_W 0xA40A0008UL + +#define INTC_ICR0 0xA414FEE0UL +#define INTC_ICR1 0xA4140010UL +#define INTC_ICR2 0xA4140012UL + +/* MTD */ + +#define MPR2_MTD_BOOTLOADER_SIZE 0x00060000UL +#define MPR2_MTD_KERNEL_SIZE 0x00200000UL + +#endif /* __ASM_SH_MAGICPANELR2_H */ diff --git a/arch/sh/include/asm/mc146818rtc.h b/arch/sh/include/asm/mc146818rtc.h new file mode 100644 index 00000000000..0aee96a9733 --- /dev/null +++ b/arch/sh/include/asm/mc146818rtc.h @@ -0,0 +1,7 @@ +/* + * Machine dependent access functions for RTC registers. + */ +#ifndef _ASM_MC146818RTC_H +#define _ASM_MC146818RTC_H + +#endif /* _ASM_MC146818RTC_H */ diff --git a/arch/sh/include/asm/microdev.h b/arch/sh/include/asm/microdev.h new file mode 100644 index 00000000000..1aed15856e1 --- /dev/null +++ b/arch/sh/include/asm/microdev.h @@ -0,0 +1,80 @@ +/* + * linux/include/asm-sh/microdev.h + * + * Copyright (C) 2003 Sean McGoogan (Sean.McGoogan@superh.com) + * + * Definitions for the SuperH SH4-202 MicroDev board. + * + * May be copied or modified under the terms of the GNU General Public + * License. See linux/COPYING for more information. + */ +#ifndef __ASM_SH_MICRODEV_H +#define __ASM_SH_MICRODEV_H + +extern void init_microdev_irq(void); +extern void microdev_print_fpga_intc_status(void); + +/* + * The following are useful macros for manipulating the interrupt + * controller (INTC) on the CPU-board FPGA. should be noted that there + * is an INTC on the FPGA, and a separate INTC on the SH4-202 core - + * these are two different things, both of which need to be prorammed to + * correctly route - unfortunately, they have the same name and + * abbreviations! + */ +#define MICRODEV_FPGA_INTC_BASE 0xa6110000ul /* INTC base address on CPU-board FPGA */ +#define MICRODEV_FPGA_INTENB_REG (MICRODEV_FPGA_INTC_BASE+0ul) /* Interrupt Enable Register on INTC on CPU-board FPGA */ +#define MICRODEV_FPGA_INTDSB_REG (MICRODEV_FPGA_INTC_BASE+8ul) /* Interrupt Disable Register on INTC on CPU-board FPGA */ +#define MICRODEV_FPGA_INTC_MASK(n) (1ul<<(n)) /* Interrupt mask to enable/disable INTC in CPU-board FPGA */ +#define MICRODEV_FPGA_INTPRI_REG(n) (MICRODEV_FPGA_INTC_BASE+0x10+((n)/8)*8)/* Interrupt Priority Register on INTC on CPU-board FPGA */ +#define MICRODEV_FPGA_INTPRI_LEVEL(n,x) ((x)<<(((n)%8)*4)) /* MICRODEV_FPGA_INTPRI_LEVEL(int_number, int_level) */ +#define MICRODEV_FPGA_INTPRI_MASK(n) (MICRODEV_FPGA_INTPRI_LEVEL((n),0xful)) /* Interrupt Priority Mask on INTC on CPU-board FPGA */ +#define MICRODEV_FPGA_INTSRC_REG (MICRODEV_FPGA_INTC_BASE+0x30ul) /* Interrupt Source Register on INTC on CPU-board FPGA */ +#define MICRODEV_FPGA_INTREQ_REG (MICRODEV_FPGA_INTC_BASE+0x38ul) /* Interrupt Request Register on INTC on CPU-board FPGA */ + + +/* + * The following are the IRQ numbers for the Linux Kernel for external + * interrupts. i.e. the numbers seen by 'cat /proc/interrupt'. + */ +#define MICRODEV_LINUX_IRQ_KEYBOARD 1 /* SuperIO Keyboard */ +#define MICRODEV_LINUX_IRQ_SERIAL1 2 /* SuperIO Serial #1 */ +#define MICRODEV_LINUX_IRQ_ETHERNET 3 /* on-board Ethnernet */ +#define MICRODEV_LINUX_IRQ_SERIAL2 4 /* SuperIO Serial #2 */ +#define MICRODEV_LINUX_IRQ_USB_HC 7 /* on-board USB HC */ +#define MICRODEV_LINUX_IRQ_MOUSE 12 /* SuperIO PS/2 Mouse */ +#define MICRODEV_LINUX_IRQ_IDE2 13 /* SuperIO IDE #2 */ +#define MICRODEV_LINUX_IRQ_IDE1 14 /* SuperIO IDE #1 */ + +/* + * The following are the IRQ numbers for the INTC on the FPGA for + * external interrupts. i.e. the bits in the INTC registers in the + * FPGA. + */ +#define MICRODEV_FPGA_IRQ_KEYBOARD 1 /* SuperIO Keyboard */ +#define MICRODEV_FPGA_IRQ_SERIAL1 3 /* SuperIO Serial #1 */ +#define MICRODEV_FPGA_IRQ_SERIAL2 4 /* SuperIO Serial #2 */ +#define MICRODEV_FPGA_IRQ_MOUSE 12 /* SuperIO PS/2 Mouse */ +#define MICRODEV_FPGA_IRQ_IDE1 14 /* SuperIO IDE #1 */ +#define MICRODEV_FPGA_IRQ_IDE2 15 /* SuperIO IDE #2 */ +#define MICRODEV_FPGA_IRQ_USB_HC 16 /* on-board USB HC */ +#define MICRODEV_FPGA_IRQ_ETHERNET 18 /* on-board Ethnernet */ + +#define MICRODEV_IRQ_PCI_INTA 8 +#define MICRODEV_IRQ_PCI_INTB 9 +#define MICRODEV_IRQ_PCI_INTC 10 +#define MICRODEV_IRQ_PCI_INTD 11 + +#define __IO_PREFIX microdev +#include + +#if defined(CONFIG_PCI) +unsigned char microdev_pci_inb(unsigned long port); +unsigned short microdev_pci_inw(unsigned long port); +unsigned long microdev_pci_inl(unsigned long port); +void microdev_pci_outb(unsigned char data, unsigned long port); +void microdev_pci_outw(unsigned short data, unsigned long port); +void microdev_pci_outl(unsigned long data, unsigned long port); +#endif + +#endif /* __ASM_SH_MICRODEV_H */ diff --git a/arch/sh/include/asm/migor.h b/arch/sh/include/asm/migor.h new file mode 100644 index 00000000000..10016e0f4a4 --- /dev/null +++ b/arch/sh/include/asm/migor.h @@ -0,0 +1,65 @@ +#ifndef __ASM_SH_MIGOR_H +#define __ASM_SH_MIGOR_H + +/* + * linux/include/asm-sh/migor.h + * + * Copyright (C) 2008 Renesas Solutions + * + * Portions Copyright (C) 2007 Nobuhiro Iwamatsu + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + */ +#include + +/* GPIO */ +#define PORT_PACR 0xa4050100 +#define PORT_PDCR 0xa4050106 +#define PORT_PECR 0xa4050108 +#define PORT_PHCR 0xa405010e +#define PORT_PJCR 0xa4050110 +#define PORT_PKCR 0xa4050112 +#define PORT_PLCR 0xa4050114 +#define PORT_PMCR 0xa4050116 +#define PORT_PRCR 0xa405011c +#define PORT_PTCR 0xa4050140 +#define PORT_PUCR 0xa4050142 +#define PORT_PVCR 0xa4050144 +#define PORT_PWCR 0xa4050146 +#define PORT_PXCR 0xa4050148 +#define PORT_PYCR 0xa405014a +#define PORT_PZCR 0xa405014c +#define PORT_PADR 0xa4050120 +#define PORT_PHDR 0xa405012e +#define PORT_PTDR 0xa4050160 +#define PORT_PWDR 0xa4050166 + +#define PORT_HIZCRA 0xa4050158 +#define PORT_HIZCRC 0xa405015c + +#define PORT_MSELCRB 0xa4050182 + +#define MSTPCR1 0xa4150034 +#define MSTPCR2 0xa4150038 + +#define PORT_PSELA 0xa405014e +#define PORT_PSELB 0xa4050150 +#define PORT_PSELC 0xa4050152 +#define PORT_PSELD 0xa4050154 +#define PORT_PSELE 0xa4050156 + +#define PORT_HIZCRA 0xa4050158 +#define PORT_HIZCRB 0xa405015a +#define PORT_HIZCRC 0xa405015c + +#define BSC_CS6ABCR 0xfec1001c + +#include + +int migor_lcd_qvga_setup(void *board_data, void *sys_ops_handle, + struct sh_mobile_lcdc_sys_bus_ops *sys_ops); + +#endif /* __ASM_SH_MIGOR_H */ diff --git a/arch/sh/include/asm/mman.h b/arch/sh/include/asm/mman.h new file mode 100644 index 00000000000..156eb0225cf --- /dev/null +++ b/arch/sh/include/asm/mman.h @@ -0,0 +1,17 @@ +#ifndef __ASM_SH_MMAN_H +#define __ASM_SH_MMAN_H + +#include + +#define MAP_GROWSDOWN 0x0100 /* stack-like segment */ +#define MAP_DENYWRITE 0x0800 /* ETXTBSY */ +#define MAP_EXECUTABLE 0x1000 /* mark it as an executable */ +#define MAP_LOCKED 0x2000 /* pages are locked */ +#define MAP_NORESERVE 0x4000 /* don't check for reservations */ +#define MAP_POPULATE 0x8000 /* populate (prefault) page tables */ +#define MAP_NONBLOCK 0x10000 /* do not block on IO */ + +#define MCL_CURRENT 1 /* lock all current mappings */ +#define MCL_FUTURE 2 /* lock all future mappings */ + +#endif /* __ASM_SH_MMAN_H */ diff --git a/arch/sh/include/asm/mmu.h b/arch/sh/include/asm/mmu.h new file mode 100644 index 00000000000..fdcb93bc6d1 --- /dev/null +++ b/arch/sh/include/asm/mmu.h @@ -0,0 +1,76 @@ +#ifndef __MMU_H +#define __MMU_H + +/* Default "unsigned long" context */ +typedef unsigned long mm_context_id_t[NR_CPUS]; + +typedef struct { +#ifdef CONFIG_MMU + mm_context_id_t id; + void *vdso; +#else + struct vm_list_struct *vmlist; + unsigned long end_brk; +#endif +#ifdef CONFIG_BINFMT_ELF_FDPIC + unsigned long exec_fdpic_loadmap; + unsigned long interp_fdpic_loadmap; +#endif +} mm_context_t; + +/* + * Privileged Space Mapping Buffer (PMB) definitions + */ +#define PMB_PASCR 0xff000070 +#define PMB_IRMCR 0xff000078 + +#define PMB_ADDR 0xf6100000 +#define PMB_DATA 0xf7100000 +#define PMB_ENTRY_MAX 16 +#define PMB_E_MASK 0x0000000f +#define PMB_E_SHIFT 8 + +#define PMB_SZ_16M 0x00000000 +#define PMB_SZ_64M 0x00000010 +#define PMB_SZ_128M 0x00000080 +#define PMB_SZ_512M 0x00000090 +#define PMB_SZ_MASK PMB_SZ_512M +#define PMB_C 0x00000008 +#define PMB_WT 0x00000001 +#define PMB_UB 0x00000200 +#define PMB_V 0x00000100 + +#define PMB_NO_ENTRY (-1) + +struct pmb_entry; + +struct pmb_entry { + unsigned long vpn; + unsigned long ppn; + unsigned long flags; + + /* + * 0 .. NR_PMB_ENTRIES for specific entry selection, or + * PMB_NO_ENTRY to search for a free one + */ + int entry; + + struct pmb_entry *next; + /* Adjacent entry link for contiguous multi-entry mappings */ + struct pmb_entry *link; +}; + +/* arch/sh/mm/pmb.c */ +int __set_pmb_entry(unsigned long vpn, unsigned long ppn, + unsigned long flags, int *entry); +int set_pmb_entry(struct pmb_entry *pmbe); +void clear_pmb_entry(struct pmb_entry *pmbe); +struct pmb_entry *pmb_alloc(unsigned long vpn, unsigned long ppn, + unsigned long flags); +void pmb_free(struct pmb_entry *pmbe); +long pmb_remap(unsigned long virt, unsigned long phys, + unsigned long size, unsigned long flags); +void pmb_unmap(unsigned long addr); + +#endif /* __MMU_H */ + diff --git a/arch/sh/include/asm/mmu_context.h b/arch/sh/include/asm/mmu_context.h new file mode 100644 index 00000000000..04c0c9733ad --- /dev/null +++ b/arch/sh/include/asm/mmu_context.h @@ -0,0 +1,185 @@ +/* + * Copyright (C) 1999 Niibe Yutaka + * Copyright (C) 2003 - 2007 Paul Mundt + * + * ASID handling idea taken from MIPS implementation. + */ +#ifndef __ASM_SH_MMU_CONTEXT_H +#define __ASM_SH_MMU_CONTEXT_H + +#ifdef __KERNEL__ +#include +#include +#include +#include +#include + +/* + * The MMU "context" consists of two things: + * (a) TLB cache version (or round, cycle whatever expression you like) + * (b) ASID (Address Space IDentifier) + */ +#define MMU_CONTEXT_ASID_MASK 0x000000ff +#define MMU_CONTEXT_VERSION_MASK 0xffffff00 +#define MMU_CONTEXT_FIRST_VERSION 0x00000100 +#define NO_CONTEXT 0 + +/* ASID is 8-bit value, so it can't be 0x100 */ +#define MMU_NO_ASID 0x100 + +#define asid_cache(cpu) (cpu_data[cpu].asid_cache) + +#ifdef CONFIG_MMU +#define cpu_context(cpu, mm) ((mm)->context.id[cpu]) + +#define cpu_asid(cpu, mm) \ + (cpu_context((cpu), (mm)) & MMU_CONTEXT_ASID_MASK) + +/* + * Virtual Page Number mask + */ +#define MMU_VPN_MASK 0xfffff000 + +#if defined(CONFIG_SUPERH32) +#include "mmu_context_32.h" +#else +#include "mmu_context_64.h" +#endif + +/* + * Get MMU context if needed. + */ +static inline void get_mmu_context(struct mm_struct *mm, unsigned int cpu) +{ + unsigned long asid = asid_cache(cpu); + + /* Check if we have old version of context. */ + if (((cpu_context(cpu, mm) ^ asid) & MMU_CONTEXT_VERSION_MASK) == 0) + /* It's up to date, do nothing */ + return; + + /* It's old, we need to get new context with new version. */ + if (!(++asid & MMU_CONTEXT_ASID_MASK)) { + /* + * We exhaust ASID of this version. + * Flush all TLB and start new cycle. + */ + flush_tlb_all(); + +#ifdef CONFIG_SUPERH64 + /* + * The SH-5 cache uses the ASIDs, requiring both the I and D + * cache to be flushed when the ASID is exhausted. Weak. + */ + flush_cache_all(); +#endif + + /* + * Fix version; Note that we avoid version #0 + * to distingush NO_CONTEXT. + */ + if (!asid) + asid = MMU_CONTEXT_FIRST_VERSION; + } + + cpu_context(cpu, mm) = asid_cache(cpu) = asid; +} + +/* + * Initialize the context related info for a new mm_struct + * instance. + */ +static inline int init_new_context(struct task_struct *tsk, + struct mm_struct *mm) +{ + int i; + + for (i = 0; i < num_online_cpus(); i++) + cpu_context(i, mm) = NO_CONTEXT; + + return 0; +} + +/* + * After we have set current->mm to a new value, this activates + * the context for the new mm so we see the new mappings. + */ +static inline void activate_context(struct mm_struct *mm, unsigned int cpu) +{ + get_mmu_context(mm, cpu); + set_asid(cpu_asid(cpu, mm)); +} + +static inline void switch_mm(struct mm_struct *prev, + struct mm_struct *next, + struct task_struct *tsk) +{ + unsigned int cpu = smp_processor_id(); + + if (likely(prev != next)) { + cpu_set(cpu, next->cpu_vm_mask); + set_TTB(next->pgd); + activate_context(next, cpu); + } else + if (!cpu_test_and_set(cpu, next->cpu_vm_mask)) + activate_context(next, cpu); +} +#else +#define get_mmu_context(mm) do { } while (0) +#define init_new_context(tsk,mm) (0) +#define destroy_context(mm) do { } while (0) +#define set_asid(asid) do { } while (0) +#define get_asid() (0) +#define cpu_asid(cpu, mm) ({ (void)cpu; 0; }) +#define switch_and_save_asid(asid) (0) +#define set_TTB(pgd) do { } while (0) +#define get_TTB() (0) +#define activate_context(mm,cpu) do { } while (0) +#define switch_mm(prev,next,tsk) do { } while (0) +#endif /* CONFIG_MMU */ + +#define activate_mm(prev, next) switch_mm((prev),(next),NULL) +#define deactivate_mm(tsk,mm) do { } while (0) +#define enter_lazy_tlb(mm,tsk) do { } while (0) + +#if defined(CONFIG_CPU_SH3) || defined(CONFIG_CPU_SH4) +/* + * If this processor has an MMU, we need methods to turn it off/on .. + * paging_init() will also have to be updated for the processor in + * question. + */ +static inline void enable_mmu(void) +{ + unsigned int cpu = smp_processor_id(); + + /* Enable MMU */ + ctrl_outl(MMU_CONTROL_INIT, MMUCR); + ctrl_barrier(); + + if (asid_cache(cpu) == NO_CONTEXT) + asid_cache(cpu) = MMU_CONTEXT_FIRST_VERSION; + + set_asid(asid_cache(cpu) & MMU_CONTEXT_ASID_MASK); +} + +static inline void disable_mmu(void) +{ + unsigned long cr; + + cr = ctrl_inl(MMUCR); + cr &= ~MMU_CONTROL_INIT; + ctrl_outl(cr, MMUCR); + + ctrl_barrier(); +} +#else +/* + * MMU control handlers for processors lacking memory + * management hardware. + */ +#define enable_mmu() do { } while (0) +#define disable_mmu() do { } while (0) +#endif + +#endif /* __KERNEL__ */ +#endif /* __ASM_SH_MMU_CONTEXT_H */ diff --git a/arch/sh/include/asm/mmu_context_32.h b/arch/sh/include/asm/mmu_context_32.h new file mode 100644 index 00000000000..f4f9aebd68b --- /dev/null +++ b/arch/sh/include/asm/mmu_context_32.h @@ -0,0 +1,47 @@ +#ifndef __ASM_SH_MMU_CONTEXT_32_H +#define __ASM_SH_MMU_CONTEXT_32_H + +/* + * Destroy context related info for an mm_struct that is about + * to be put to rest. + */ +static inline void destroy_context(struct mm_struct *mm) +{ + /* Do nothing */ +} + +static inline void set_asid(unsigned long asid) +{ + unsigned long __dummy; + + __asm__ __volatile__ ("mov.l %2, %0\n\t" + "and %3, %0\n\t" + "or %1, %0\n\t" + "mov.l %0, %2" + : "=&r" (__dummy) + : "r" (asid), "m" (__m(MMU_PTEH)), + "r" (0xffffff00)); +} + +static inline unsigned long get_asid(void) +{ + unsigned long asid; + + __asm__ __volatile__ ("mov.l %1, %0" + : "=r" (asid) + : "m" (__m(MMU_PTEH))); + asid &= MMU_CONTEXT_ASID_MASK; + return asid; +} + +/* MMU_TTB is used for optimizing the fault handling. */ +static inline void set_TTB(pgd_t *pgd) +{ + ctrl_outl((unsigned long)pgd, MMU_TTB); +} + +static inline pgd_t *get_TTB(void) +{ + return (pgd_t *)ctrl_inl(MMU_TTB); +} +#endif /* __ASM_SH_MMU_CONTEXT_32_H */ diff --git a/arch/sh/include/asm/mmu_context_64.h b/arch/sh/include/asm/mmu_context_64.h new file mode 100644 index 00000000000..de121025d87 --- /dev/null +++ b/arch/sh/include/asm/mmu_context_64.h @@ -0,0 +1,78 @@ +#ifndef __ASM_SH_MMU_CONTEXT_64_H +#define __ASM_SH_MMU_CONTEXT_64_H + +/* + * sh64-specific mmu_context interface. + * + * Copyright (C) 2000, 2001 Paolo Alberelli + * Copyright (C) 2003 - 2007 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include +#include + +#define SR_ASID_MASK 0xffffffffff00ffffULL +#define SR_ASID_SHIFT 16 + +/* + * Destroy context related info for an mm_struct that is about + * to be put to rest. + */ +static inline void destroy_context(struct mm_struct *mm) +{ + /* Well, at least free TLB entries */ + flush_tlb_mm(mm); +} + +static inline unsigned long get_asid(void) +{ + unsigned long long sr; + + asm volatile ("getcon " __SR ", %0\n\t" + : "=r" (sr)); + + sr = (sr >> SR_ASID_SHIFT) & MMU_CONTEXT_ASID_MASK; + return (unsigned long) sr; +} + +/* Set ASID into SR */ +static inline void set_asid(unsigned long asid) +{ + unsigned long long sr, pc; + + asm volatile ("getcon " __SR ", %0" : "=r" (sr)); + + sr = (sr & SR_ASID_MASK) | (asid << SR_ASID_SHIFT); + + /* + * It is possible that this function may be inlined and so to avoid + * the assembler reporting duplicate symbols we make use of the + * gas trick of generating symbols using numerics and forward + * reference. + */ + asm volatile ("movi 1, %1\n\t" + "shlli %1, 28, %1\n\t" + "or %0, %1, %1\n\t" + "putcon %1, " __SR "\n\t" + "putcon %0, " __SSR "\n\t" + "movi 1f, %1\n\t" + "ori %1, 1 , %1\n\t" + "putcon %1, " __SPC "\n\t" + "rte\n" + "1:\n\t" + : "=r" (sr), "=r" (pc) : "0" (sr)); +} + +/* arch/sh/kernel/cpu/sh5/entry.S */ +extern unsigned long switch_and_save_asid(unsigned long new_asid); + +/* No spare register to twiddle, so use a software cache */ +extern pgd_t *mmu_pdtp_cache; + +#define set_TTB(pgd) (mmu_pdtp_cache = (pgd)) +#define get_TTB() (mmu_pdtp_cache) + +#endif /* __ASM_SH_MMU_CONTEXT_64_H */ diff --git a/arch/sh/include/asm/mmzone.h b/arch/sh/include/asm/mmzone.h new file mode 100644 index 00000000000..2969253c404 --- /dev/null +++ b/arch/sh/include/asm/mmzone.h @@ -0,0 +1,48 @@ +#ifndef __ASM_SH_MMZONE_H +#define __ASM_SH_MMZONE_H + +#ifdef __KERNEL__ + +#ifdef CONFIG_NEED_MULTIPLE_NODES +extern struct pglist_data *node_data[]; +#define NODE_DATA(nid) (node_data[nid]) + +#define node_start_pfn(nid) (NODE_DATA(nid)->node_start_pfn) +#define node_end_pfn(nid) (NODE_DATA(nid)->node_start_pfn + \ + NODE_DATA(nid)->node_spanned_pages) + +static inline int pfn_to_nid(unsigned long pfn) +{ + int nid; + + for (nid = 0; nid < MAX_NUMNODES; nid++) + if (pfn >= node_start_pfn(nid) && pfn <= node_end_pfn(nid)) + break; + + return nid; +} + +static inline struct pglist_data *pfn_to_pgdat(unsigned long pfn) +{ + return NODE_DATA(pfn_to_nid(pfn)); +} + +/* arch/sh/mm/numa.c */ +void __init setup_bootmem_node(int nid, unsigned long start, unsigned long end); +#else +static inline void +setup_bootmem_node(int nid, unsigned long start, unsigned long end) +{ +} +#endif /* CONFIG_NEED_MULTIPLE_NODES */ + +/* Platform specific mem init */ +void __init plat_mem_setup(void); + +/* arch/sh/kernel/setup.c */ +void __init setup_bootmem_allocator(unsigned long start_pfn); +void __init __add_active_range(unsigned int nid, unsigned long start_pfn, + unsigned long end_pfn); + +#endif /* __KERNEL__ */ +#endif /* __ASM_SH_MMZONE_H */ diff --git a/arch/sh/include/asm/module.h b/arch/sh/include/asm/module.h new file mode 100644 index 00000000000..46eccd33166 --- /dev/null +++ b/arch/sh/include/asm/module.h @@ -0,0 +1,44 @@ +#ifndef _ASM_SH_MODULE_H +#define _ASM_SH_MODULE_H + +/* + * This file contains the SH architecture specific module code. + */ + +struct mod_arch_specific { + /* Nothing to see here .. */ +}; + +#define Elf_Shdr Elf32_Shdr +#define Elf_Sym Elf32_Sym +#define Elf_Ehdr Elf32_Ehdr + +#ifdef CONFIG_CPU_LITTLE_ENDIAN +# ifdef CONFIG_CPU_SH2 +# define MODULE_PROC_FAMILY "SH2LE " +# elif defined CONFIG_CPU_SH3 +# define MODULE_PROC_FAMILY "SH3LE " +# elif defined CONFIG_CPU_SH4 +# define MODULE_PROC_FAMILY "SH4LE " +# elif defined CONFIG_CPU_SH5 +# define MODULE_PROC_FAMILY "SH5LE " +# else +# error unknown processor family +# endif +#else +# ifdef CONFIG_CPU_SH2 +# define MODULE_PROC_FAMILY "SH2BE " +# elif defined CONFIG_CPU_SH3 +# define MODULE_PROC_FAMILY "SH3BE " +# elif defined CONFIG_CPU_SH4 +# define MODULE_PROC_FAMILY "SH4BE " +# elif defined CONFIG_CPU_SH5 +# define MODULE_PROC_FAMILY "SH5BE " +# else +# error unknown processor family +# endif +#endif + +#define MODULE_ARCH_VERMAGIC MODULE_PROC_FAMILY + +#endif /* _ASM_SH_MODULE_H */ diff --git a/arch/sh/include/asm/msgbuf.h b/arch/sh/include/asm/msgbuf.h new file mode 100644 index 00000000000..517432343fb --- /dev/null +++ b/arch/sh/include/asm/msgbuf.h @@ -0,0 +1,31 @@ +#ifndef __ASM_SH_MSGBUF_H +#define __ASM_SH_MSGBUF_H + +/* + * The msqid64_ds structure for i386 architecture. + * Note extra padding because this structure is passed back and forth + * between kernel and user space. + * + * Pad space is left for: + * - 64-bit time_t to solve y2038 problem + * - 2 miscellaneous 32-bit values + */ + +struct msqid64_ds { + struct ipc64_perm msg_perm; + __kernel_time_t msg_stime; /* last msgsnd time */ + unsigned long __unused1; + __kernel_time_t msg_rtime; /* last msgrcv time */ + unsigned long __unused2; + __kernel_time_t msg_ctime; /* last change time */ + unsigned long __unused3; + unsigned long msg_cbytes; /* current number of bytes on queue */ + unsigned long msg_qnum; /* number of messages in queue */ + unsigned long msg_qbytes; /* max number of bytes on queue */ + __kernel_pid_t msg_lspid; /* pid of last msgsnd */ + __kernel_pid_t msg_lrpid; /* last receive pid */ + unsigned long __unused4; + unsigned long __unused5; +}; + +#endif /* __ASM_SH_MSGBUF_H */ diff --git a/arch/sh/include/asm/mutex.h b/arch/sh/include/asm/mutex.h new file mode 100644 index 00000000000..458c1f7fbc1 --- /dev/null +++ b/arch/sh/include/asm/mutex.h @@ -0,0 +1,9 @@ +/* + * Pull in the generic implementation for the mutex fastpath. + * + * TODO: implement optimized primitives instead, or leave the generic + * implementation in place, or pick the atomic_xchg() based generic + * implementation. (see asm-generic/mutex-xchg.h for details) + */ + +#include diff --git a/arch/sh/include/asm/page.h b/arch/sh/include/asm/page.h new file mode 100644 index 00000000000..77fb8bf02e4 --- /dev/null +++ b/arch/sh/include/asm/page.h @@ -0,0 +1,183 @@ +#ifndef __ASM_SH_PAGE_H +#define __ASM_SH_PAGE_H + +/* + * Copyright (C) 1999 Niibe Yutaka + */ + +#include + +/* PAGE_SHIFT determines the page size */ +#if defined(CONFIG_PAGE_SIZE_4KB) +# define PAGE_SHIFT 12 +#elif defined(CONFIG_PAGE_SIZE_8KB) +# define PAGE_SHIFT 13 +#elif defined(CONFIG_PAGE_SIZE_16KB) +# define PAGE_SHIFT 14 +#elif defined(CONFIG_PAGE_SIZE_64KB) +# define PAGE_SHIFT 16 +#else +# error "Bogus kernel page size?" +#endif + +#define PAGE_SIZE (_AC(1, UL) << PAGE_SHIFT) +#define PAGE_MASK (~(PAGE_SIZE-1)) +#define PTE_MASK PAGE_MASK + +#if defined(CONFIG_HUGETLB_PAGE_SIZE_64K) +#define HPAGE_SHIFT 16 +#elif defined(CONFIG_HUGETLB_PAGE_SIZE_256K) +#define HPAGE_SHIFT 18 +#elif defined(CONFIG_HUGETLB_PAGE_SIZE_1MB) +#define HPAGE_SHIFT 20 +#elif defined(CONFIG_HUGETLB_PAGE_SIZE_4MB) +#define HPAGE_SHIFT 22 +#elif defined(CONFIG_HUGETLB_PAGE_SIZE_64MB) +#define HPAGE_SHIFT 26 +#elif defined(CONFIG_HUGETLB_PAGE_SIZE_512MB) +#define HPAGE_SHIFT 29 +#endif + +#ifdef CONFIG_HUGETLB_PAGE +#define HPAGE_SIZE (1UL << HPAGE_SHIFT) +#define HPAGE_MASK (~(HPAGE_SIZE-1)) +#define HUGETLB_PAGE_ORDER (HPAGE_SHIFT-PAGE_SHIFT) +#endif + +#ifndef __ASSEMBLY__ + +extern unsigned long shm_align_mask; +extern unsigned long max_low_pfn, min_low_pfn; +extern unsigned long memory_start, memory_end; + +extern void clear_page(void *to); +extern void copy_page(void *to, void *from); + +#if !defined(CONFIG_CACHE_OFF) && defined(CONFIG_MMU) && \ + (defined(CONFIG_CPU_SH5) || defined(CONFIG_CPU_SH4) || \ + defined(CONFIG_SH7705_CACHE_32KB)) +struct page; +struct vm_area_struct; +extern void clear_user_page(void *to, unsigned long address, struct page *page); +extern void copy_user_page(void *to, void *from, unsigned long address, + struct page *page); +#if defined(CONFIG_CPU_SH4) +extern void copy_user_highpage(struct page *to, struct page *from, + unsigned long vaddr, struct vm_area_struct *vma); +#define __HAVE_ARCH_COPY_USER_HIGHPAGE +#endif +#else +#define clear_user_page(page, vaddr, pg) clear_page(page) +#define copy_user_page(to, from, vaddr, pg) copy_page(to, from) +#endif + +/* + * These are used to make use of C type-checking.. + */ +#ifdef CONFIG_X2TLB +typedef struct { unsigned long pte_low, pte_high; } pte_t; +typedef struct { unsigned long long pgprot; } pgprot_t; +typedef struct { unsigned long long pgd; } pgd_t; +#define pte_val(x) \ + ((x).pte_low | ((unsigned long long)(x).pte_high << 32)) +#define __pte(x) \ + ({ pte_t __pte = {(x), ((unsigned long long)(x)) >> 32}; __pte; }) +#elif defined(CONFIG_SUPERH32) +typedef struct { unsigned long pte_low; } pte_t; +typedef struct { unsigned long pgprot; } pgprot_t; +typedef struct { unsigned long pgd; } pgd_t; +#define pte_val(x) ((x).pte_low) +#define __pte(x) ((pte_t) { (x) } ) +#else +typedef struct { unsigned long long pte_low; } pte_t; +typedef struct { unsigned long pgprot; } pgprot_t; +typedef struct { unsigned long pgd; } pgd_t; +#define pte_val(x) ((x).pte_low) +#define __pte(x) ((pte_t) { (x) } ) +#endif + +#define pgd_val(x) ((x).pgd) +#define pgprot_val(x) ((x).pgprot) + +#define __pgd(x) ((pgd_t) { (x) } ) +#define __pgprot(x) ((pgprot_t) { (x) } ) + +typedef struct page *pgtable_t; + +#endif /* !__ASSEMBLY__ */ + +/* + * __MEMORY_START and SIZE are the physical addresses and size of RAM. + */ +#define __MEMORY_START CONFIG_MEMORY_START +#define __MEMORY_SIZE CONFIG_MEMORY_SIZE + +/* + * PAGE_OFFSET is the virtual address of the start of kernel address + * space. + */ +#define PAGE_OFFSET CONFIG_PAGE_OFFSET + +/* + * Virtual to physical RAM address translation. + * + * In 29 bit mode, the physical offset of RAM from address 0 is visible in + * the kernel virtual address space, and thus we don't have to take + * this into account when translating. However in 32 bit mode this offset + * is not visible (it is part of the PMB mapping) and so needs to be + * added or subtracted as required. + */ +#ifdef CONFIG_32BIT +#define __pa(x) ((unsigned long)(x)-PAGE_OFFSET+__MEMORY_START) +#define __va(x) ((void *)((unsigned long)(x)+PAGE_OFFSET-__MEMORY_START)) +#else +#define __pa(x) ((unsigned long)(x)-PAGE_OFFSET) +#define __va(x) ((void *)((unsigned long)(x)+PAGE_OFFSET)) +#endif + +#define pfn_to_kaddr(pfn) __va((pfn) << PAGE_SHIFT) +#define page_to_phys(page) (page_to_pfn(page) << PAGE_SHIFT) + +/* + * PFN = physical frame number (ie PFN 0 == physical address 0) + * PFN_START is the PFN of the first page of RAM. By defining this we + * don't have struct page entries for the portion of address space + * between physical address 0 and the start of RAM. + */ +#define PFN_START (__MEMORY_START >> PAGE_SHIFT) +#define ARCH_PFN_OFFSET (PFN_START) +#define virt_to_page(kaddr) pfn_to_page(__pa(kaddr) >> PAGE_SHIFT) +#ifdef CONFIG_FLATMEM +#define pfn_valid(pfn) ((pfn) >= min_low_pfn && (pfn) < max_low_pfn) +#endif +#define virt_addr_valid(kaddr) pfn_valid(__pa(kaddr) >> PAGE_SHIFT) + +#define VM_DATA_DEFAULT_FLAGS (VM_READ | VM_WRITE | VM_EXEC | \ + VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC) + +#include +#include + +/* vDSO support */ +#ifdef CONFIG_VSYSCALL +#define __HAVE_ARCH_GATE_AREA +#endif + +/* + * Some drivers need to perform DMA into kmalloc'ed buffers + * and so we have to increase the kmalloc minalign for this. + */ +#define ARCH_KMALLOC_MINALIGN L1_CACHE_BYTES + +#ifdef CONFIG_SUPERH64 +/* + * While BYTES_PER_WORD == 4 on the current sh64 ABI, GCC will still + * happily generate {ld/st}.q pairs, requiring us to have 8-byte + * alignment to avoid traps. The kmalloc alignment is gauranteed by + * virtue of L1_CACHE_BYTES, requiring this to only be special cased + * for slab caches. + */ +#define ARCH_SLAB_MINALIGN 8 +#endif + +#endif /* __ASM_SH_PAGE_H */ diff --git a/arch/sh/include/asm/param.h b/arch/sh/include/asm/param.h new file mode 100644 index 00000000000..ae245afdfd6 --- /dev/null +++ b/arch/sh/include/asm/param.h @@ -0,0 +1,22 @@ +#ifndef __ASM_SH_PARAM_H +#define __ASM_SH_PARAM_H + +#ifdef __KERNEL__ +# define HZ CONFIG_HZ +# define USER_HZ 100 /* User interfaces are in "ticks" */ +# define CLOCKS_PER_SEC (USER_HZ) /* frequency at which times() counts */ +#endif + +#ifndef HZ +#define HZ 100 +#endif + +#define EXEC_PAGESIZE 4096 + +#ifndef NOGROUP +#define NOGROUP (-1) +#endif + +#define MAXHOSTNAMELEN 64 /* max length of hostname */ + +#endif /* __ASM_SH_PARAM_H */ diff --git a/arch/sh/include/asm/parport.h b/arch/sh/include/asm/parport.h new file mode 100644 index 00000000000..f67ba60a2ac --- /dev/null +++ b/arch/sh/include/asm/parport.h @@ -0,0 +1,16 @@ +/* + * Copyright (C) 1999, 2000 Tim Waugh + * + * This file should only be included by drivers/parport/parport_pc.c. + */ +#ifndef __ASM_SH_PARPORT_H +#define __ASM_SH_PARPORT_H + +static int __devinit parport_pc_find_isa_ports(int autoirq, int autodma); + +static int __devinit parport_pc_find_nonpci_ports(int autoirq, int autodma) +{ + return parport_pc_find_isa_ports(autoirq, autodma); +} + +#endif /* __ASM_SH_PARPORT_H */ diff --git a/arch/sh/include/asm/pci.h b/arch/sh/include/asm/pci.h new file mode 100644 index 00000000000..df1d383e18a --- /dev/null +++ b/arch/sh/include/asm/pci.h @@ -0,0 +1,144 @@ +#ifndef __ASM_SH_PCI_H +#define __ASM_SH_PCI_H + +#ifdef __KERNEL__ + +#include + +/* Can be used to override the logic in pci_scan_bus for skipping + already-configured bus numbers - to be used for buggy BIOSes + or architectures with incomplete PCI setup by the loader */ + +#define pcibios_assign_all_busses() 1 +#define pcibios_scan_all_fns(a, b) 0 + +/* + * A board can define one or more PCI channels that represent built-in (or + * external) PCI controllers. + */ +struct pci_channel { + struct pci_ops *pci_ops; + struct resource *io_resource; + struct resource *mem_resource; + int first_devfn; + int last_devfn; +}; + +/* + * Each board initializes this array and terminates it with a NULL entry. + */ +extern struct pci_channel board_pci_channels[]; + +#define PCIBIOS_MIN_IO board_pci_channels->io_resource->start +#define PCIBIOS_MIN_MEM board_pci_channels->mem_resource->start + +/* + * I/O routine helpers + */ +#if defined(CONFIG_CPU_SUBTYPE_SH7780) || defined(CONFIG_CPU_SUBTYPE_SH7785) +#define PCI_IO_AREA 0xFE400000 +#define PCI_IO_SIZE 0x00400000 +#elif defined(CONFIG_CPU_SH5) +extern unsigned long PCI_IO_AREA; +#define PCI_IO_SIZE 0x00010000 +#else +#define PCI_IO_AREA 0xFE240000 +#define PCI_IO_SIZE 0x00040000 +#endif + +#define PCI_MEM_SIZE 0x01000000 + +#define SH4_PCIIOBR_MASK 0xFFFC0000 +#define pci_ioaddr(addr) (PCI_IO_AREA + (addr & ~SH4_PCIIOBR_MASK)) + +#if defined(CONFIG_PCI) +#define is_pci_ioaddr(port) \ + (((port) >= PCIBIOS_MIN_IO) && \ + ((port) < (PCIBIOS_MIN_IO + PCI_IO_SIZE))) +#define is_pci_memaddr(port) \ + (((port) >= PCIBIOS_MIN_MEM) && \ + ((port) < (PCIBIOS_MIN_MEM + PCI_MEM_SIZE))) +#else +#define is_pci_ioaddr(port) (0) +#define is_pci_memaddr(port) (0) +#endif + +struct pci_dev; + +extern void pcibios_set_master(struct pci_dev *dev); + +static inline void pcibios_penalize_isa_irq(int irq, int active) +{ + /* We don't do dynamic PCI IRQ allocation */ +} + +/* Dynamic DMA mapping stuff. + * SuperH has everything mapped statically like x86. + */ + +/* The PCI address space does equal the physical memory + * address space. The networking and block device layers use + * this boolean for bounce buffer decisions. + */ +#define PCI_DMA_BUS_IS_PHYS (1) + +#include +#include +#include +#include +#include + +/* pci_unmap_{single,page} being a nop depends upon the + * configuration. + */ +#ifdef CONFIG_SH_PCIDMA_NONCOHERENT +#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME) \ + dma_addr_t ADDR_NAME; +#define DECLARE_PCI_UNMAP_LEN(LEN_NAME) \ + __u32 LEN_NAME; +#define pci_unmap_addr(PTR, ADDR_NAME) \ + ((PTR)->ADDR_NAME) +#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL) \ + (((PTR)->ADDR_NAME) = (VAL)) +#define pci_unmap_len(PTR, LEN_NAME) \ + ((PTR)->LEN_NAME) +#define pci_unmap_len_set(PTR, LEN_NAME, VAL) \ + (((PTR)->LEN_NAME) = (VAL)) +#else +#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME) +#define DECLARE_PCI_UNMAP_LEN(LEN_NAME) +#define pci_unmap_addr(PTR, ADDR_NAME) (0) +#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL) do { } while (0) +#define pci_unmap_len(PTR, LEN_NAME) (0) +#define pci_unmap_len_set(PTR, LEN_NAME, VAL) do { } while (0) +#endif + +#ifdef CONFIG_PCI +static inline void pci_dma_burst_advice(struct pci_dev *pdev, + enum pci_dma_burst_strategy *strat, + unsigned long *strategy_parameter) +{ + *strat = PCI_DMA_BURST_INFINITY; + *strategy_parameter = ~0UL; +} +#endif + +/* Board-specific fixup routines. */ +void pcibios_fixup(void); +int pcibios_init_platform(void); +int pcibios_map_platform_irq(struct pci_dev *dev, u8 slot, u8 pin); + +#ifdef CONFIG_PCI_AUTO +int pciauto_assign_resources(int busno, struct pci_channel *hose); +#endif + +#endif /* __KERNEL__ */ + +/* generic pci stuff */ +#include + +/* generic DMA-mapping stuff */ +#include + +#endif /* __ASM_SH_PCI_H */ + diff --git a/arch/sh/include/asm/percpu.h b/arch/sh/include/asm/percpu.h new file mode 100644 index 00000000000..4db4b39a439 --- /dev/null +++ b/arch/sh/include/asm/percpu.h @@ -0,0 +1,6 @@ +#ifndef __ARCH_SH_PERCPU +#define __ARCH_SH_PERCPU + +#include + +#endif /* __ARCH_SH_PERCPU */ diff --git a/arch/sh/include/asm/pgalloc.h b/arch/sh/include/asm/pgalloc.h new file mode 100644 index 00000000000..84dd2db7104 --- /dev/null +++ b/arch/sh/include/asm/pgalloc.h @@ -0,0 +1,96 @@ +#ifndef __ASM_SH_PGALLOC_H +#define __ASM_SH_PGALLOC_H + +#include +#include + +#define QUICK_PGD 0 /* We preserve special mappings over free */ +#define QUICK_PT 1 /* Other page table pages that are zero on free */ + +static inline void pmd_populate_kernel(struct mm_struct *mm, pmd_t *pmd, + pte_t *pte) +{ + set_pmd(pmd, __pmd((unsigned long)pte)); +} + +static inline void pmd_populate(struct mm_struct *mm, pmd_t *pmd, + pgtable_t pte) +{ + set_pmd(pmd, __pmd((unsigned long)page_address(pte))); +} +#define pmd_pgtable(pmd) pmd_page(pmd) + +static inline void pgd_ctor(void *x) +{ + pgd_t *pgd = x; + + memcpy(pgd + USER_PTRS_PER_PGD, + swapper_pg_dir + USER_PTRS_PER_PGD, + (PTRS_PER_PGD - USER_PTRS_PER_PGD) * sizeof(pgd_t)); +} + +/* + * Allocate and free page tables. + */ +static inline pgd_t *pgd_alloc(struct mm_struct *mm) +{ + return quicklist_alloc(QUICK_PGD, GFP_KERNEL | __GFP_REPEAT, pgd_ctor); +} + +static inline void pgd_free(struct mm_struct *mm, pgd_t *pgd) +{ + quicklist_free(QUICK_PGD, NULL, pgd); +} + +static inline pte_t *pte_alloc_one_kernel(struct mm_struct *mm, + unsigned long address) +{ + return quicklist_alloc(QUICK_PT, GFP_KERNEL | __GFP_REPEAT, NULL); +} + +static inline pgtable_t pte_alloc_one(struct mm_struct *mm, + unsigned long address) +{ + struct page *page; + void *pg; + + pg = quicklist_alloc(QUICK_PT, GFP_KERNEL | __GFP_REPEAT, NULL); + if (!pg) + return NULL; + page = virt_to_page(pg); + pgtable_page_ctor(page); + return page; +} + +static inline void pte_free_kernel(struct mm_struct *mm, pte_t *pte) +{ + quicklist_free(QUICK_PT, NULL, pte); +} + +static inline void pte_free(struct mm_struct *mm, pgtable_t pte) +{ + pgtable_page_dtor(pte); + quicklist_free_page(QUICK_PT, NULL, pte); +} + +#define __pte_free_tlb(tlb,pte) \ +do { \ + pgtable_page_dtor(pte); \ + tlb_remove_page((tlb), (pte)); \ +} while (0) + +/* + * allocating and freeing a pmd is trivial: the 1-entry pmd is + * inside the pgd, so has no extra memory associated with it. + */ + +#define pmd_free(mm, x) do { } while (0) +#define __pmd_free_tlb(tlb,x) do { } while (0) + +static inline void check_pgt_cache(void) +{ + quicklist_trim(QUICK_PGD, NULL, 25, 16); + quicklist_trim(QUICK_PT, NULL, 25, 16); +} + +#endif /* __ASM_SH_PGALLOC_H */ diff --git a/arch/sh/include/asm/pgtable.h b/arch/sh/include/asm/pgtable.h new file mode 100644 index 00000000000..a4a8f8b9346 --- /dev/null +++ b/arch/sh/include/asm/pgtable.h @@ -0,0 +1,152 @@ +/* + * This file contains the functions and defines necessary to modify and + * use the SuperH page table tree. + * + * Copyright (C) 1999 Niibe Yutaka + * Copyright (C) 2002 - 2007 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General + * Public License. See the file "COPYING" in the main directory of this + * archive for more details. + */ +#ifndef __ASM_SH_PGTABLE_H +#define __ASM_SH_PGTABLE_H + +#include +#include + +#ifndef __ASSEMBLY__ +#include +#include + +/* + * ZERO_PAGE is a global shared page that is always zero: used + * for zero-mapped memory areas etc.. + */ +extern unsigned long empty_zero_page[PAGE_SIZE / sizeof(unsigned long)]; +#define ZERO_PAGE(vaddr) (virt_to_page(empty_zero_page)) + +#endif /* !__ASSEMBLY__ */ + +/* + * Effective and physical address definitions, to aid with sign + * extension. + */ +#define NEFF 32 +#define NEFF_SIGN (1LL << (NEFF - 1)) +#define NEFF_MASK (-1LL << NEFF) + +#ifdef CONFIG_29BIT +#define NPHYS 29 +#else +#define NPHYS 32 +#endif + +#define NPHYS_SIGN (1LL << (NPHYS - 1)) +#define NPHYS_MASK (-1LL << NPHYS) + +/* + * traditional two-level paging structure + */ +/* PTE bits */ +#if defined(CONFIG_X2TLB) || defined(CONFIG_SUPERH64) +# define PTE_MAGNITUDE 3 /* 64-bit PTEs on extended mode SH-X2 TLB */ +#else +# define PTE_MAGNITUDE 2 /* 32-bit PTEs */ +#endif +#define PTE_SHIFT PAGE_SHIFT +#define PTE_BITS (PTE_SHIFT - PTE_MAGNITUDE) + +/* PGD bits */ +#define PGDIR_SHIFT (PTE_SHIFT + PTE_BITS) +#define PGDIR_SIZE (1UL << PGDIR_SHIFT) +#define PGDIR_MASK (~(PGDIR_SIZE-1)) + +/* Entries per level */ +#define PTRS_PER_PTE (PAGE_SIZE / (1 << PTE_MAGNITUDE)) +#define PTRS_PER_PGD (PAGE_SIZE / sizeof(pgd_t)) + +#define USER_PTRS_PER_PGD (TASK_SIZE/PGDIR_SIZE) +#define FIRST_USER_ADDRESS 0 + +#ifdef CONFIG_32BIT +#define PHYS_ADDR_MASK 0xffffffff +#else +#define PHYS_ADDR_MASK 0x1fffffff +#endif + +#define PTE_PHYS_MASK (PHYS_ADDR_MASK & PAGE_MASK) + +#ifdef CONFIG_SUPERH32 +#define VMALLOC_START (P3SEG) +#else +#define VMALLOC_START (0xf0000000) +#endif +#define VMALLOC_END (FIXADDR_START-2*PAGE_SIZE) + +#if defined(CONFIG_SUPERH32) +#include +#else +#include +#endif + +/* + * SH-X and lower (legacy) SuperH parts (SH-3, SH-4, some SH-4A) can't do page + * protection for execute, and considers it the same as a read. Also, write + * permission implies read permission. This is the closest we can get.. + * + * SH-X2 (SH7785) and later parts take this to the opposite end of the extreme, + * not only supporting separate execute, read, and write bits, but having + * completely separate permission bits for user and kernel space. + */ + /*xwr*/ +#define __P000 PAGE_NONE +#define __P001 PAGE_READONLY +#define __P010 PAGE_COPY +#define __P011 PAGE_COPY +#define __P100 PAGE_EXECREAD +#define __P101 PAGE_EXECREAD +#define __P110 PAGE_COPY +#define __P111 PAGE_COPY + +#define __S000 PAGE_NONE +#define __S001 PAGE_READONLY +#define __S010 PAGE_WRITEONLY +#define __S011 PAGE_SHARED +#define __S100 PAGE_EXECREAD +#define __S101 PAGE_EXECREAD +#define __S110 PAGE_RWX +#define __S111 PAGE_RWX + +typedef pte_t *pte_addr_t; + +#define kern_addr_valid(addr) (1) + +#define io_remap_pfn_range(vma, vaddr, pfn, size, prot) \ + remap_pfn_range(vma, vaddr, pfn, size, prot) + +#define pte_pfn(x) ((unsigned long)(((x).pte_low >> PAGE_SHIFT))) + +/* + * No page table caches to initialise + */ +#define pgtable_cache_init() do { } while (0) + +#if !defined(CONFIG_CACHE_OFF) && (defined(CONFIG_CPU_SH4) || \ + defined(CONFIG_SH7705_CACHE_32KB)) +struct mm_struct; +#define __HAVE_ARCH_PTEP_GET_AND_CLEAR +pte_t ptep_get_and_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep); +#endif + +struct vm_area_struct; +extern void update_mmu_cache(struct vm_area_struct * vma, + unsigned long address, pte_t pte); +extern pgd_t swapper_pg_dir[PTRS_PER_PGD]; +extern void paging_init(void); +extern void page_table_range_init(unsigned long start, unsigned long end, + pgd_t *pgd); + +#include + +#endif /* __ASM_SH_PGTABLE_H */ diff --git a/arch/sh/include/asm/pgtable_32.h b/arch/sh/include/asm/pgtable_32.h new file mode 100644 index 00000000000..72ea209195b --- /dev/null +++ b/arch/sh/include/asm/pgtable_32.h @@ -0,0 +1,479 @@ +#ifndef __ASM_SH_PGTABLE_32_H +#define __ASM_SH_PGTABLE_32_H + +/* + * Linux PTEL encoding. + * + * Hardware and software bit definitions for the PTEL value (see below for + * notes on SH-X2 MMUs and 64-bit PTEs): + * + * - Bits 0 and 7 are reserved on SH-3 (_PAGE_WT and _PAGE_SZ1 on SH-4). + * + * - Bit 1 is the SH-bit, but is unused on SH-3 due to an MMU bug (the + * hardware PTEL value can't have the SH-bit set when MMUCR.IX is set, + * which is the default in cpu-sh3/mmu_context.h:MMU_CONTROL_INIT). + * + * In order to keep this relatively clean, do not use these for defining + * SH-3 specific flags until all of the other unused bits have been + * exhausted. + * + * - Bit 9 is reserved by everyone and used by _PAGE_PROTNONE. + * + * - Bits 10 and 11 are low bits of the PPN that are reserved on >= 4K pages. + * Bit 10 is used for _PAGE_ACCESSED, bit 11 remains unused. + * + * - On 29 bit platforms, bits 31 to 29 are used for the space attributes + * and timing control which (together with bit 0) are moved into the + * old-style PTEA on the parts that support it. + * + * XXX: Leave the _PAGE_FILE and _PAGE_WT overhaul for a rainy day. + * + * SH-X2 MMUs and extended PTEs + * + * SH-X2 supports an extended mode TLB with split data arrays due to the + * number of bits needed for PR and SZ (now EPR and ESZ) encodings. The PR and + * SZ bit placeholders still exist in data array 1, but are implemented as + * reserved bits, with the real logic existing in data array 2. + * + * The downside to this is that we can no longer fit everything in to a 32-bit + * PTE encoding, so a 64-bit pte_t is necessary for these parts. On the plus + * side, this gives us quite a few spare bits to play with for future usage. + */ +/* Legacy and compat mode bits */ +#define _PAGE_WT 0x001 /* WT-bit on SH-4, 0 on SH-3 */ +#define _PAGE_HW_SHARED 0x002 /* SH-bit : shared among processes */ +#define _PAGE_DIRTY 0x004 /* D-bit : page changed */ +#define _PAGE_CACHABLE 0x008 /* C-bit : cachable */ +#define _PAGE_SZ0 0x010 /* SZ0-bit : Size of page */ +#define _PAGE_RW 0x020 /* PR0-bit : write access allowed */ +#define _PAGE_USER 0x040 /* PR1-bit : user space access allowed*/ +#define _PAGE_SZ1 0x080 /* SZ1-bit : Size of page (on SH-4) */ +#define _PAGE_PRESENT 0x100 /* V-bit : page is valid */ +#define _PAGE_PROTNONE 0x200 /* software: if not present */ +#define _PAGE_ACCESSED 0x400 /* software: page referenced */ +#define _PAGE_FILE _PAGE_WT /* software: pagecache or swap? */ + +#define _PAGE_SZ_MASK (_PAGE_SZ0 | _PAGE_SZ1) +#define _PAGE_PR_MASK (_PAGE_RW | _PAGE_USER) + +/* Extended mode bits */ +#define _PAGE_EXT_ESZ0 0x0010 /* ESZ0-bit: Size of page */ +#define _PAGE_EXT_ESZ1 0x0020 /* ESZ1-bit: Size of page */ +#define _PAGE_EXT_ESZ2 0x0040 /* ESZ2-bit: Size of page */ +#define _PAGE_EXT_ESZ3 0x0080 /* ESZ3-bit: Size of page */ + +#define _PAGE_EXT_USER_EXEC 0x0100 /* EPR0-bit: User space executable */ +#define _PAGE_EXT_USER_WRITE 0x0200 /* EPR1-bit: User space writable */ +#define _PAGE_EXT_USER_READ 0x0400 /* EPR2-bit: User space readable */ + +#define _PAGE_EXT_KERN_EXEC 0x0800 /* EPR3-bit: Kernel space executable */ +#define _PAGE_EXT_KERN_WRITE 0x1000 /* EPR4-bit: Kernel space writable */ +#define _PAGE_EXT_KERN_READ 0x2000 /* EPR5-bit: Kernel space readable */ + +/* Wrapper for extended mode pgprot twiddling */ +#define _PAGE_EXT(x) ((unsigned long long)(x) << 32) + +/* software: moves to PTEA.TC (Timing Control) */ +#define _PAGE_PCC_AREA5 0x00000000 /* use BSC registers for area5 */ +#define _PAGE_PCC_AREA6 0x80000000 /* use BSC registers for area6 */ + +/* software: moves to PTEA.SA[2:0] (Space Attributes) */ +#define _PAGE_PCC_IODYN 0x00000001 /* IO space, dynamically sized bus */ +#define _PAGE_PCC_IO8 0x20000000 /* IO space, 8 bit bus */ +#define _PAGE_PCC_IO16 0x20000001 /* IO space, 16 bit bus */ +#define _PAGE_PCC_COM8 0x40000000 /* Common Memory space, 8 bit bus */ +#define _PAGE_PCC_COM16 0x40000001 /* Common Memory space, 16 bit bus */ +#define _PAGE_PCC_ATR8 0x60000000 /* Attribute Memory space, 8 bit bus */ +#define _PAGE_PCC_ATR16 0x60000001 /* Attribute Memory space, 6 bit bus */ + +/* Mask which drops unused bits from the PTEL value */ +#if defined(CONFIG_CPU_SH3) +#define _PAGE_CLEAR_FLAGS (_PAGE_PROTNONE | _PAGE_ACCESSED| \ + _PAGE_FILE | _PAGE_SZ1 | \ + _PAGE_HW_SHARED) +#elif defined(CONFIG_X2TLB) +/* Get rid of the legacy PR/SZ bits when using extended mode */ +#define _PAGE_CLEAR_FLAGS (_PAGE_PROTNONE | _PAGE_ACCESSED | \ + _PAGE_FILE | _PAGE_PR_MASK | _PAGE_SZ_MASK) +#else +#define _PAGE_CLEAR_FLAGS (_PAGE_PROTNONE | _PAGE_ACCESSED | _PAGE_FILE) +#endif + +#define _PAGE_FLAGS_HARDWARE_MASK (PHYS_ADDR_MASK & ~(_PAGE_CLEAR_FLAGS)) + +/* Hardware flags, page size encoding */ +#if !defined(CONFIG_MMU) +# define _PAGE_FLAGS_HARD 0ULL +#elif defined(CONFIG_X2TLB) +# if defined(CONFIG_PAGE_SIZE_4KB) +# define _PAGE_FLAGS_HARD _PAGE_EXT(_PAGE_EXT_ESZ0) +# elif defined(CONFIG_PAGE_SIZE_8KB) +# define _PAGE_FLAGS_HARD _PAGE_EXT(_PAGE_EXT_ESZ1) +# elif defined(CONFIG_PAGE_SIZE_64KB) +# define _PAGE_FLAGS_HARD _PAGE_EXT(_PAGE_EXT_ESZ2) +# endif +#else +# if defined(CONFIG_PAGE_SIZE_4KB) +# define _PAGE_FLAGS_HARD _PAGE_SZ0 +# elif defined(CONFIG_PAGE_SIZE_64KB) +# define _PAGE_FLAGS_HARD _PAGE_SZ1 +# endif +#endif + +#if defined(CONFIG_X2TLB) +# if defined(CONFIG_HUGETLB_PAGE_SIZE_64K) +# define _PAGE_SZHUGE (_PAGE_EXT_ESZ2) +# elif defined(CONFIG_HUGETLB_PAGE_SIZE_256K) +# define _PAGE_SZHUGE (_PAGE_EXT_ESZ0 | _PAGE_EXT_ESZ2) +# elif defined(CONFIG_HUGETLB_PAGE_SIZE_1MB) +# define _PAGE_SZHUGE (_PAGE_EXT_ESZ0 | _PAGE_EXT_ESZ1 | _PAGE_EXT_ESZ2) +# elif defined(CONFIG_HUGETLB_PAGE_SIZE_4MB) +# define _PAGE_SZHUGE (_PAGE_EXT_ESZ3) +# elif defined(CONFIG_HUGETLB_PAGE_SIZE_64MB) +# define _PAGE_SZHUGE (_PAGE_EXT_ESZ2 | _PAGE_EXT_ESZ3) +# endif +#else +# if defined(CONFIG_HUGETLB_PAGE_SIZE_64K) +# define _PAGE_SZHUGE (_PAGE_SZ1) +# elif defined(CONFIG_HUGETLB_PAGE_SIZE_1MB) +# define _PAGE_SZHUGE (_PAGE_SZ0 | _PAGE_SZ1) +# endif +#endif + +/* + * Stub out _PAGE_SZHUGE if we don't have a good definition for it, + * to make pte_mkhuge() happy. + */ +#ifndef _PAGE_SZHUGE +# define _PAGE_SZHUGE (_PAGE_FLAGS_HARD) +#endif + +#define _PAGE_CHG_MASK \ + (PTE_MASK | _PAGE_ACCESSED | _PAGE_CACHABLE | _PAGE_DIRTY) + +#ifndef __ASSEMBLY__ + +#if defined(CONFIG_X2TLB) /* SH-X2 TLB */ +#define PAGE_NONE __pgprot(_PAGE_PROTNONE | _PAGE_CACHABLE | \ + _PAGE_ACCESSED | _PAGE_FLAGS_HARD) + +#define PAGE_SHARED __pgprot(_PAGE_PRESENT | _PAGE_ACCESSED | \ + _PAGE_CACHABLE | _PAGE_FLAGS_HARD | \ + _PAGE_EXT(_PAGE_EXT_KERN_READ | \ + _PAGE_EXT_KERN_WRITE | \ + _PAGE_EXT_USER_READ | \ + _PAGE_EXT_USER_WRITE)) + +#define PAGE_EXECREAD __pgprot(_PAGE_PRESENT | _PAGE_ACCESSED | \ + _PAGE_CACHABLE | _PAGE_FLAGS_HARD | \ + _PAGE_EXT(_PAGE_EXT_KERN_EXEC | \ + _PAGE_EXT_KERN_READ | \ + _PAGE_EXT_USER_EXEC | \ + _PAGE_EXT_USER_READ)) + +#define PAGE_COPY PAGE_EXECREAD + +#define PAGE_READONLY __pgprot(_PAGE_PRESENT | _PAGE_ACCESSED | \ + _PAGE_CACHABLE | _PAGE_FLAGS_HARD | \ + _PAGE_EXT(_PAGE_EXT_KERN_READ | \ + _PAGE_EXT_USER_READ)) + +#define PAGE_WRITEONLY __pgprot(_PAGE_PRESENT | _PAGE_ACCESSED | \ + _PAGE_CACHABLE | _PAGE_FLAGS_HARD | \ + _PAGE_EXT(_PAGE_EXT_KERN_WRITE | \ + _PAGE_EXT_USER_WRITE)) + +#define PAGE_RWX __pgprot(_PAGE_PRESENT | _PAGE_ACCESSED | \ + _PAGE_CACHABLE | _PAGE_FLAGS_HARD | \ + _PAGE_EXT(_PAGE_EXT_KERN_WRITE | \ + _PAGE_EXT_KERN_READ | \ + _PAGE_EXT_KERN_EXEC | \ + _PAGE_EXT_USER_WRITE | \ + _PAGE_EXT_USER_READ | \ + _PAGE_EXT_USER_EXEC)) + +#define PAGE_KERNEL __pgprot(_PAGE_PRESENT | _PAGE_CACHABLE | \ + _PAGE_DIRTY | _PAGE_ACCESSED | \ + _PAGE_HW_SHARED | _PAGE_FLAGS_HARD | \ + _PAGE_EXT(_PAGE_EXT_KERN_READ | \ + _PAGE_EXT_KERN_WRITE | \ + _PAGE_EXT_KERN_EXEC)) + +#define PAGE_KERNEL_NOCACHE \ + __pgprot(_PAGE_PRESENT | _PAGE_DIRTY | \ + _PAGE_ACCESSED | _PAGE_HW_SHARED | \ + _PAGE_FLAGS_HARD | \ + _PAGE_EXT(_PAGE_EXT_KERN_READ | \ + _PAGE_EXT_KERN_WRITE | \ + _PAGE_EXT_KERN_EXEC)) + +#define PAGE_KERNEL_RO __pgprot(_PAGE_PRESENT | _PAGE_CACHABLE | \ + _PAGE_DIRTY | _PAGE_ACCESSED | \ + _PAGE_HW_SHARED | _PAGE_FLAGS_HARD | \ + _PAGE_EXT(_PAGE_EXT_KERN_READ | \ + _PAGE_EXT_KERN_EXEC)) + +#define PAGE_KERNEL_PCC(slot, type) \ + __pgprot(_PAGE_PRESENT | _PAGE_DIRTY | \ + _PAGE_ACCESSED | _PAGE_FLAGS_HARD | \ + _PAGE_EXT(_PAGE_EXT_KERN_READ | \ + _PAGE_EXT_KERN_WRITE | \ + _PAGE_EXT_KERN_EXEC) \ + (slot ? _PAGE_PCC_AREA5 : _PAGE_PCC_AREA6) | \ + (type)) + +#elif defined(CONFIG_MMU) /* SH-X TLB */ +#define PAGE_NONE __pgprot(_PAGE_PROTNONE | _PAGE_CACHABLE | \ + _PAGE_ACCESSED | _PAGE_FLAGS_HARD) + +#define PAGE_SHARED __pgprot(_PAGE_PRESENT | _PAGE_RW | _PAGE_USER | \ + _PAGE_CACHABLE | _PAGE_ACCESSED | \ + _PAGE_FLAGS_HARD) + +#define PAGE_COPY __pgprot(_PAGE_PRESENT | _PAGE_USER | _PAGE_CACHABLE | \ + _PAGE_ACCESSED | _PAGE_FLAGS_HARD) + +#define PAGE_READONLY __pgprot(_PAGE_PRESENT | _PAGE_USER | _PAGE_CACHABLE | \ + _PAGE_ACCESSED | _PAGE_FLAGS_HARD) + +#define PAGE_EXECREAD PAGE_READONLY +#define PAGE_RWX PAGE_SHARED +#define PAGE_WRITEONLY PAGE_SHARED + +#define PAGE_KERNEL __pgprot(_PAGE_PRESENT | _PAGE_RW | _PAGE_CACHABLE | \ + _PAGE_DIRTY | _PAGE_ACCESSED | \ + _PAGE_HW_SHARED | _PAGE_FLAGS_HARD) + +#define PAGE_KERNEL_NOCACHE \ + __pgprot(_PAGE_PRESENT | _PAGE_RW | _PAGE_DIRTY | \ + _PAGE_ACCESSED | _PAGE_HW_SHARED | \ + _PAGE_FLAGS_HARD) + +#define PAGE_KERNEL_RO __pgprot(_PAGE_PRESENT | _PAGE_CACHABLE | \ + _PAGE_DIRTY | _PAGE_ACCESSED | \ + _PAGE_HW_SHARED | _PAGE_FLAGS_HARD) + +#define PAGE_KERNEL_PCC(slot, type) \ + __pgprot(_PAGE_PRESENT | _PAGE_RW | _PAGE_DIRTY | \ + _PAGE_ACCESSED | _PAGE_FLAGS_HARD | \ + (slot ? _PAGE_PCC_AREA5 : _PAGE_PCC_AREA6) | \ + (type)) +#else /* no mmu */ +#define PAGE_NONE __pgprot(0) +#define PAGE_SHARED __pgprot(0) +#define PAGE_COPY __pgprot(0) +#define PAGE_EXECREAD __pgprot(0) +#define PAGE_RWX __pgprot(0) +#define PAGE_READONLY __pgprot(0) +#define PAGE_WRITEONLY __pgprot(0) +#define PAGE_KERNEL __pgprot(0) +#define PAGE_KERNEL_NOCACHE __pgprot(0) +#define PAGE_KERNEL_RO __pgprot(0) + +#define PAGE_KERNEL_PCC(slot, type) \ + __pgprot(0) +#endif + +#endif /* __ASSEMBLY__ */ + +#ifndef __ASSEMBLY__ + +/* + * Certain architectures need to do special things when PTEs + * within a page table are directly modified. Thus, the following + * hook is made available. + */ +#ifdef CONFIG_X2TLB +static inline void set_pte(pte_t *ptep, pte_t pte) +{ + ptep->pte_high = pte.pte_high; + smp_wmb(); + ptep->pte_low = pte.pte_low; +} +#else +#define set_pte(pteptr, pteval) (*(pteptr) = pteval) +#endif + +#define set_pte_at(mm,addr,ptep,pteval) set_pte(ptep,pteval) + +/* + * (pmds are folded into pgds so this doesn't get actually called, + * but the define is needed for a generic inline function.) + */ +#define set_pmd(pmdptr, pmdval) (*(pmdptr) = pmdval) + +#define pfn_pte(pfn, prot) \ + __pte(((unsigned long long)(pfn) << PAGE_SHIFT) | pgprot_val(prot)) +#define pfn_pmd(pfn, prot) \ + __pmd(((unsigned long long)(pfn) << PAGE_SHIFT) | pgprot_val(prot)) + +#define pte_none(x) (!pte_val(x)) +#define pte_present(x) ((x).pte_low & (_PAGE_PRESENT | _PAGE_PROTNONE)) + +#define pte_clear(mm,addr,xp) do { set_pte_at(mm, addr, xp, __pte(0)); } while (0) + +#define pmd_none(x) (!pmd_val(x)) +#define pmd_present(x) (pmd_val(x)) +#define pmd_clear(xp) do { set_pmd(xp, __pmd(0)); } while (0) +#define pmd_bad(x) (pmd_val(x) & ~PAGE_MASK) + +#define pages_to_mb(x) ((x) >> (20-PAGE_SHIFT)) +#define pte_page(x) pfn_to_page(pte_pfn(x)) + +/* + * The following only work if pte_present() is true. + * Undefined behaviour if not.. + */ +#define pte_not_present(pte) (!((pte).pte_low & _PAGE_PRESENT)) +#define pte_dirty(pte) ((pte).pte_low & _PAGE_DIRTY) +#define pte_young(pte) ((pte).pte_low & _PAGE_ACCESSED) +#define pte_file(pte) ((pte).pte_low & _PAGE_FILE) +#define pte_special(pte) (0) + +#ifdef CONFIG_X2TLB +#define pte_write(pte) ((pte).pte_high & _PAGE_EXT_USER_WRITE) +#else +#define pte_write(pte) ((pte).pte_low & _PAGE_RW) +#endif + +#define PTE_BIT_FUNC(h,fn,op) \ +static inline pte_t pte_##fn(pte_t pte) { pte.pte_##h op; return pte; } + +#ifdef CONFIG_X2TLB +/* + * We cheat a bit in the SH-X2 TLB case. As the permission bits are + * individually toggled (and user permissions are entirely decoupled from + * kernel permissions), we attempt to couple them a bit more sanely here. + */ +PTE_BIT_FUNC(high, wrprotect, &= ~_PAGE_EXT_USER_WRITE); +PTE_BIT_FUNC(high, mkwrite, |= _PAGE_EXT_USER_WRITE | _PAGE_EXT_KERN_WRITE); +PTE_BIT_FUNC(high, mkhuge, |= _PAGE_SZHUGE); +#else +PTE_BIT_FUNC(low, wrprotect, &= ~_PAGE_RW); +PTE_BIT_FUNC(low, mkwrite, |= _PAGE_RW); +PTE_BIT_FUNC(low, mkhuge, |= _PAGE_SZHUGE); +#endif + +PTE_BIT_FUNC(low, mkclean, &= ~_PAGE_DIRTY); +PTE_BIT_FUNC(low, mkdirty, |= _PAGE_DIRTY); +PTE_BIT_FUNC(low, mkold, &= ~_PAGE_ACCESSED); +PTE_BIT_FUNC(low, mkyoung, |= _PAGE_ACCESSED); + +static inline pte_t pte_mkspecial(pte_t pte) { return pte; } + +/* + * Macro and implementation to make a page protection as uncachable. + */ +#define pgprot_writecombine(prot) \ + __pgprot(pgprot_val(prot) & ~_PAGE_CACHABLE) + +#define pgprot_noncached pgprot_writecombine + +/* + * Conversion functions: convert a page and protection to a page entry, + * and a page entry and page directory to the page they refer to. + * + * extern pte_t mk_pte(struct page *page, pgprot_t pgprot) + */ +#define mk_pte(page, pgprot) pfn_pte(page_to_pfn(page), (pgprot)) + +static inline pte_t pte_modify(pte_t pte, pgprot_t newprot) +{ + pte.pte_low &= _PAGE_CHG_MASK; + pte.pte_low |= pgprot_val(newprot); + +#ifdef CONFIG_X2TLB + pte.pte_high |= pgprot_val(newprot) >> 32; +#endif + + return pte; +} + +#define pmd_page_vaddr(pmd) ((unsigned long)pmd_val(pmd)) +#define pmd_page(pmd) (virt_to_page(pmd_val(pmd))) + +/* to find an entry in a page-table-directory. */ +#define pgd_index(address) (((address) >> PGDIR_SHIFT) & (PTRS_PER_PGD-1)) +#define pgd_offset(mm, address) ((mm)->pgd+pgd_index(address)) + +/* to find an entry in a kernel page-table-directory */ +#define pgd_offset_k(address) pgd_offset(&init_mm, address) + +/* Find an entry in the third-level page table.. */ +#define pte_index(address) ((address >> PAGE_SHIFT) & (PTRS_PER_PTE - 1)) +#define pte_offset_kernel(dir, address) \ + ((pte_t *) pmd_page_vaddr(*(dir)) + pte_index(address)) +#define pte_offset_map(dir, address) pte_offset_kernel(dir, address) +#define pte_offset_map_nested(dir, address) pte_offset_kernel(dir, address) + +#define pte_unmap(pte) do { } while (0) +#define pte_unmap_nested(pte) do { } while (0) + +#ifdef CONFIG_X2TLB +#define pte_ERROR(e) \ + printk("%s:%d: bad pte %p(%08lx%08lx).\n", __FILE__, __LINE__, \ + &(e), (e).pte_high, (e).pte_low) +#define pgd_ERROR(e) \ + printk("%s:%d: bad pgd %016llx.\n", __FILE__, __LINE__, pgd_val(e)) +#else +#define pte_ERROR(e) \ + printk("%s:%d: bad pte %08lx.\n", __FILE__, __LINE__, pte_val(e)) +#define pgd_ERROR(e) \ + printk("%s:%d: bad pgd %08lx.\n", __FILE__, __LINE__, pgd_val(e)) +#endif + +/* + * Encode and de-code a swap entry + * + * Constraints: + * _PAGE_FILE at bit 0 + * _PAGE_PRESENT at bit 8 + * _PAGE_PROTNONE at bit 9 + * + * For the normal case, we encode the swap type into bits 0:7 and the + * swap offset into bits 10:30. For the 64-bit PTE case, we keep the + * preserved bits in the low 32-bits and use the upper 32 as the swap + * offset (along with a 5-bit type), following the same approach as x86 + * PAE. This keeps the logic quite simple, and allows for a full 32 + * PTE_FILE_MAX_BITS, as opposed to the 29-bits we're constrained with + * in the pte_low case. + * + * As is evident by the Alpha code, if we ever get a 64-bit unsigned + * long (swp_entry_t) to match up with the 64-bit PTEs, this all becomes + * much cleaner.. + * + * NOTE: We should set ZEROs at the position of _PAGE_PRESENT + * and _PAGE_PROTNONE bits + */ +#ifdef CONFIG_X2TLB +#define __swp_type(x) ((x).val & 0x1f) +#define __swp_offset(x) ((x).val >> 5) +#define __swp_entry(type, offset) ((swp_entry_t){ (type) | (offset) << 5}) +#define __pte_to_swp_entry(pte) ((swp_entry_t){ (pte).pte_high }) +#define __swp_entry_to_pte(x) ((pte_t){ 0, (x).val }) + +/* + * Encode and decode a nonlinear file mapping entry + */ +#define pte_to_pgoff(pte) ((pte).pte_high) +#define pgoff_to_pte(off) ((pte_t) { _PAGE_FILE, (off) }) + +#define PTE_FILE_MAX_BITS 32 +#else +#define __swp_type(x) ((x).val & 0xff) +#define __swp_offset(x) ((x).val >> 10) +#define __swp_entry(type, offset) ((swp_entry_t){(type) | (offset) <<10}) + +#define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) >> 1 }) +#define __swp_entry_to_pte(x) ((pte_t) { (x).val << 1 }) + +/* + * Encode and decode a nonlinear file mapping entry + */ +#define PTE_FILE_MAX_BITS 29 +#define pte_to_pgoff(pte) (pte_val(pte) >> 1) +#define pgoff_to_pte(off) ((pte_t) { ((off) << 1) | _PAGE_FILE }) +#endif + +#endif /* __ASSEMBLY__ */ +#endif /* __ASM_SH_PGTABLE_32_H */ diff --git a/arch/sh/include/asm/pgtable_64.h b/arch/sh/include/asm/pgtable_64.h new file mode 100644 index 00000000000..c78990cda55 --- /dev/null +++ b/arch/sh/include/asm/pgtable_64.h @@ -0,0 +1,314 @@ +#ifndef __ASM_SH_PGTABLE_64_H +#define __ASM_SH_PGTABLE_64_H + +/* + * include/asm-sh/pgtable_64.h + * + * This file contains the functions and defines necessary to modify and use + * the SuperH page table tree. + * + * Copyright (C) 2000, 2001 Paolo Alberelli + * Copyright (C) 2003, 2004 Paul Mundt + * Copyright (C) 2003, 2004 Richard Curnow + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include +#include +#include + +/* + * Error outputs. + */ +#define pte_ERROR(e) \ + printk("%s:%d: bad pte %016Lx.\n", __FILE__, __LINE__, pte_val(e)) +#define pgd_ERROR(e) \ + printk("%s:%d: bad pgd %08lx.\n", __FILE__, __LINE__, pgd_val(e)) + +/* + * Table setting routines. Used within arch/mm only. + */ +#define set_pmd(pmdptr, pmdval) (*(pmdptr) = pmdval) + +static __inline__ void set_pte(pte_t *pteptr, pte_t pteval) +{ + unsigned long long x = ((unsigned long long) pteval.pte_low); + unsigned long long *xp = (unsigned long long *) pteptr; + /* + * Sign-extend based on NPHYS. + */ + *(xp) = (x & NPHYS_SIGN) ? (x | NPHYS_MASK) : x; +} +#define set_pte_at(mm,addr,ptep,pteval) set_pte(ptep,pteval) + +static __inline__ void pmd_set(pmd_t *pmdp,pte_t *ptep) +{ + pmd_val(*pmdp) = (unsigned long) ptep; +} + +/* + * PGD defines. Top level. + */ + +/* To find an entry in a generic PGD. */ +#define pgd_index(address) (((address) >> PGDIR_SHIFT) & (PTRS_PER_PGD-1)) +#define __pgd_offset(address) pgd_index(address) +#define pgd_offset(mm, address) ((mm)->pgd+pgd_index(address)) + +/* To find an entry in a kernel PGD. */ +#define pgd_offset_k(address) pgd_offset(&init_mm, address) + +/* + * PMD level access routines. Same notes as above. + */ +#define _PMD_EMPTY 0x0 +/* Either the PMD is empty or present, it's not paged out */ +#define pmd_present(pmd_entry) (pmd_val(pmd_entry) & _PAGE_PRESENT) +#define pmd_clear(pmd_entry_p) (set_pmd((pmd_entry_p), __pmd(_PMD_EMPTY))) +#define pmd_none(pmd_entry) (pmd_val((pmd_entry)) == _PMD_EMPTY) +#define pmd_bad(pmd_entry) ((pmd_val(pmd_entry) & (~PAGE_MASK & ~_PAGE_USER)) != _KERNPG_TABLE) + +#define pmd_page_vaddr(pmd_entry) \ + ((unsigned long) __va(pmd_val(pmd_entry) & PAGE_MASK)) + +#define pmd_page(pmd) \ + (virt_to_page(pmd_val(pmd))) + +/* PMD to PTE dereferencing */ +#define pte_index(address) \ + ((address >> PAGE_SHIFT) & (PTRS_PER_PTE - 1)) + +#define pte_offset_kernel(dir, addr) \ + ((pte_t *) ((pmd_val(*(dir))) & PAGE_MASK) + pte_index((addr))) + +#define pte_offset_map(dir,addr) pte_offset_kernel(dir, addr) +#define pte_offset_map_nested(dir,addr) pte_offset_kernel(dir, addr) +#define pte_unmap(pte) do { } while (0) +#define pte_unmap_nested(pte) do { } while (0) + +#ifndef __ASSEMBLY__ +#define IOBASE_VADDR 0xff000000 +#define IOBASE_END 0xffffffff + +/* + * PTEL coherent flags. + * See Chapter 17 ST50 CPU Core Volume 1, Architecture. + */ +/* The bits that are required in the SH-5 TLB are placed in the h/w-defined + positions, to avoid expensive bit shuffling on every refill. The remaining + bits are used for s/w purposes and masked out on each refill. + + Note, the PTE slots are used to hold data of type swp_entry_t when a page is + swapped out. Only the _PAGE_PRESENT flag is significant when the page is + swapped out, and it must be placed so that it doesn't overlap either the + type or offset fields of swp_entry_t. For x86, offset is at [31:8] and type + at [6:1], with _PAGE_PRESENT at bit 0 for both pte_t and swp_entry_t. This + scheme doesn't map to SH-5 because bit [0] controls cacheability. So bit + [2] is used for _PAGE_PRESENT and the type field of swp_entry_t is split + into 2 pieces. That is handled by SWP_ENTRY and SWP_TYPE below. */ +#define _PAGE_WT 0x001 /* CB0: if cacheable, 1->write-thru, 0->write-back */ +#define _PAGE_DEVICE 0x001 /* CB0: if uncacheable, 1->device (i.e. no write-combining or reordering at bus level) */ +#define _PAGE_CACHABLE 0x002 /* CB1: uncachable/cachable */ +#define _PAGE_PRESENT 0x004 /* software: page referenced */ +#define _PAGE_FILE 0x004 /* software: only when !present */ +#define _PAGE_SIZE0 0x008 /* SZ0-bit : size of page */ +#define _PAGE_SIZE1 0x010 /* SZ1-bit : size of page */ +#define _PAGE_SHARED 0x020 /* software: reflects PTEH's SH */ +#define _PAGE_READ 0x040 /* PR0-bit : read access allowed */ +#define _PAGE_EXECUTE 0x080 /* PR1-bit : execute access allowed */ +#define _PAGE_WRITE 0x100 /* PR2-bit : write access allowed */ +#define _PAGE_USER 0x200 /* PR3-bit : user space access allowed */ +#define _PAGE_DIRTY 0x400 /* software: page accessed in write */ +#define _PAGE_ACCESSED 0x800 /* software: page referenced */ + +/* Mask which drops software flags */ +#define _PAGE_FLAGS_HARDWARE_MASK 0xfffffffffffff3dbLL + +/* + * HugeTLB support + */ +#if defined(CONFIG_HUGETLB_PAGE_SIZE_64K) +#define _PAGE_SZHUGE (_PAGE_SIZE0) +#elif defined(CONFIG_HUGETLB_PAGE_SIZE_1MB) +#define _PAGE_SZHUGE (_PAGE_SIZE1) +#elif defined(CONFIG_HUGETLB_PAGE_SIZE_512MB) +#define _PAGE_SZHUGE (_PAGE_SIZE0 | _PAGE_SIZE1) +#endif + +/* + * Stub out _PAGE_SZHUGE if we don't have a good definition for it, + * to make pte_mkhuge() happy. + */ +#ifndef _PAGE_SZHUGE +# define _PAGE_SZHUGE (0) +#endif + +/* + * Default flags for a Kernel page. + * This is fundametally also SHARED because the main use of this define + * (other than for PGD/PMD entries) is for the VMALLOC pool which is + * contextless. + * + * _PAGE_EXECUTE is required for modules + * + */ +#define _KERNPG_TABLE (_PAGE_PRESENT | _PAGE_READ | _PAGE_WRITE | \ + _PAGE_EXECUTE | \ + _PAGE_CACHABLE | _PAGE_ACCESSED | _PAGE_DIRTY | \ + _PAGE_SHARED) + +/* Default flags for a User page */ +#define _PAGE_TABLE (_KERNPG_TABLE | _PAGE_USER) + +#define _PAGE_CHG_MASK (PTE_MASK | _PAGE_ACCESSED | _PAGE_DIRTY) + +/* + * We have full permissions (Read/Write/Execute/Shared). + */ +#define _PAGE_COMMON (_PAGE_PRESENT | _PAGE_USER | \ + _PAGE_CACHABLE | _PAGE_ACCESSED) + +#define PAGE_NONE __pgprot(_PAGE_CACHABLE | _PAGE_ACCESSED) +#define PAGE_SHARED __pgprot(_PAGE_COMMON | _PAGE_READ | _PAGE_WRITE | \ + _PAGE_SHARED) +#define PAGE_EXECREAD __pgprot(_PAGE_COMMON | _PAGE_READ | _PAGE_EXECUTE) + +/* + * We need to include PAGE_EXECUTE in PAGE_COPY because it is the default + * protection mode for the stack. + */ +#define PAGE_COPY PAGE_EXECREAD + +#define PAGE_READONLY __pgprot(_PAGE_COMMON | _PAGE_READ) +#define PAGE_WRITEONLY __pgprot(_PAGE_COMMON | _PAGE_WRITE) +#define PAGE_RWX __pgprot(_PAGE_COMMON | _PAGE_READ | \ + _PAGE_WRITE | _PAGE_EXECUTE) +#define PAGE_KERNEL __pgprot(_KERNPG_TABLE) + +#define PAGE_KERNEL_NOCACHE \ + __pgprot(_PAGE_PRESENT | _PAGE_READ | _PAGE_WRITE | \ + _PAGE_EXECUTE | _PAGE_ACCESSED | \ + _PAGE_DIRTY | _PAGE_SHARED) + +/* Make it a device mapping for maximum safety (e.g. for mapping device + registers into user-space via /dev/map). */ +#define pgprot_noncached(x) __pgprot(((x).pgprot & ~(_PAGE_CACHABLE)) | _PAGE_DEVICE) +#define pgprot_writecombine(prot) __pgprot(pgprot_val(prot) & ~_PAGE_CACHABLE) + +/* + * Handling allocation failures during page table setup. + */ +extern void __handle_bad_pmd_kernel(pmd_t * pmd); +#define __handle_bad_pmd(x) __handle_bad_pmd_kernel(x) + +/* + * PTE level access routines. + * + * Note1: + * It's the tree walk leaf. This is physical address to be stored. + * + * Note 2: + * Regarding the choice of _PTE_EMPTY: + + We must choose a bit pattern that cannot be valid, whether or not the page + is present. bit[2]==1 => present, bit[2]==0 => swapped out. If swapped + out, bits [31:8], [6:3], [1:0] are under swapper control, so only bit[7] is + left for us to select. If we force bit[7]==0 when swapped out, we could use + the combination bit[7,2]=2'b10 to indicate an empty PTE. Alternatively, if + we force bit[7]==1 when swapped out, we can use all zeroes to indicate + empty. This is convenient, because the page tables get cleared to zero + when they are allocated. + + */ +#define _PTE_EMPTY 0x0 +#define pte_present(x) (pte_val(x) & _PAGE_PRESENT) +#define pte_clear(mm,addr,xp) (set_pte_at(mm, addr, xp, __pte(_PTE_EMPTY))) +#define pte_none(x) (pte_val(x) == _PTE_EMPTY) + +/* + * Some definitions to translate between mem_map, PTEs, and page + * addresses: + */ + +/* + * Given a PTE, return the index of the mem_map[] entry corresponding + * to the page frame the PTE. Get the absolute physical address, make + * a relative physical address and translate it to an index. + */ +#define pte_pagenr(x) (((unsigned long) (pte_val(x)) - \ + __MEMORY_START) >> PAGE_SHIFT) + +/* + * Given a PTE, return the "struct page *". + */ +#define pte_page(x) (mem_map + pte_pagenr(x)) + +/* + * Return number of (down rounded) MB corresponding to x pages. + */ +#define pages_to_mb(x) ((x) >> (20-PAGE_SHIFT)) + + +/* + * The following have defined behavior only work if pte_present() is true. + */ +static inline int pte_dirty(pte_t pte) { return pte_val(pte) & _PAGE_DIRTY; } +static inline int pte_young(pte_t pte) { return pte_val(pte) & _PAGE_ACCESSED; } +static inline int pte_file(pte_t pte) { return pte_val(pte) & _PAGE_FILE; } +static inline int pte_write(pte_t pte) { return pte_val(pte) & _PAGE_WRITE; } +static inline int pte_special(pte_t pte){ return 0; } + +static inline pte_t pte_wrprotect(pte_t pte) { set_pte(&pte, __pte(pte_val(pte) & ~_PAGE_WRITE)); return pte; } +static inline pte_t pte_mkclean(pte_t pte) { set_pte(&pte, __pte(pte_val(pte) & ~_PAGE_DIRTY)); return pte; } +static inline pte_t pte_mkold(pte_t pte) { set_pte(&pte, __pte(pte_val(pte) & ~_PAGE_ACCESSED)); return pte; } +static inline pte_t pte_mkwrite(pte_t pte) { set_pte(&pte, __pte(pte_val(pte) | _PAGE_WRITE)); return pte; } +static inline pte_t pte_mkdirty(pte_t pte) { set_pte(&pte, __pte(pte_val(pte) | _PAGE_DIRTY)); return pte; } +static inline pte_t pte_mkyoung(pte_t pte) { set_pte(&pte, __pte(pte_val(pte) | _PAGE_ACCESSED)); return pte; } +static inline pte_t pte_mkhuge(pte_t pte) { set_pte(&pte, __pte(pte_val(pte) | _PAGE_SZHUGE)); return pte; } +static inline pte_t pte_mkspecial(pte_t pte) { return pte; } + + +/* + * Conversion functions: convert a page and protection to a page entry. + * + * extern pte_t mk_pte(struct page *page, pgprot_t pgprot) + */ +#define mk_pte(page,pgprot) \ +({ \ + pte_t __pte; \ + \ + set_pte(&__pte, __pte((((page)-mem_map) << PAGE_SHIFT) | \ + __MEMORY_START | pgprot_val((pgprot)))); \ + __pte; \ +}) + +/* + * This takes a (absolute) physical page address that is used + * by the remapping functions + */ +#define mk_pte_phys(physpage, pgprot) \ +({ pte_t __pte; set_pte(&__pte, __pte(physpage | pgprot_val(pgprot))); __pte; }) + +static inline pte_t pte_modify(pte_t pte, pgprot_t newprot) +{ set_pte(&pte, __pte((pte_val(pte) & _PAGE_CHG_MASK) | pgprot_val(newprot))); return pte; } + +/* Encode and decode a swap entry */ +#define __swp_type(x) (((x).val & 3) + (((x).val >> 1) & 0x3c)) +#define __swp_offset(x) ((x).val >> 8) +#define __swp_entry(type, offset) ((swp_entry_t) { ((offset << 8) + ((type & 0x3c) << 1) + (type & 3)) }) +#define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) }) +#define __swp_entry_to_pte(x) ((pte_t) { (x).val }) + +/* Encode and decode a nonlinear file mapping entry */ +#define PTE_FILE_MAX_BITS 29 +#define pte_to_pgoff(pte) (pte_val(pte)) +#define pgoff_to_pte(off) ((pte_t) { (off) | _PAGE_FILE }) + +#endif /* !__ASSEMBLY__ */ + +#define pfn_pte(pfn, prot) __pte(((pfn) << PAGE_SHIFT) | pgprot_val(prot)) +#define pfn_pmd(pfn, prot) __pmd(((pfn) << PAGE_SHIFT) | pgprot_val(prot)) + +#endif /* __ASM_SH_PGTABLE_64_H */ diff --git a/arch/sh/include/asm/pm.h b/arch/sh/include/asm/pm.h new file mode 100644 index 00000000000..56fdbd6b1c9 --- /dev/null +++ b/arch/sh/include/asm/pm.h @@ -0,0 +1,17 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright 2006 (c) Andriy Skulysh + * + */ +#ifndef __ASM_SH_PM_H +#define __ASM_SH_PM_H + +extern u8 wakeup_start; +extern u8 wakeup_end; + +void pm_enter(void); + +#endif diff --git a/arch/sh/include/asm/poll.h b/arch/sh/include/asm/poll.h new file mode 100644 index 00000000000..c98509d3149 --- /dev/null +++ b/arch/sh/include/asm/poll.h @@ -0,0 +1 @@ +#include diff --git a/arch/sh/include/asm/posix_types.h b/arch/sh/include/asm/posix_types.h new file mode 100644 index 00000000000..4eeb723aee7 --- /dev/null +++ b/arch/sh/include/asm/posix_types.h @@ -0,0 +1,13 @@ +#ifdef __KERNEL__ +# ifdef CONFIG_SUPERH32 +# include "posix_types_32.h" +# else +# include "posix_types_64.h" +# endif +#else +# ifdef __SH5__ +# include "posix_types_64.h" +# else +# include "posix_types_32.h" +# endif +#endif /* __KERNEL__ */ diff --git a/arch/sh/include/asm/posix_types_32.h b/arch/sh/include/asm/posix_types_32.h new file mode 100644 index 00000000000..0a3d2f54ab2 --- /dev/null +++ b/arch/sh/include/asm/posix_types_32.h @@ -0,0 +1,122 @@ +#ifndef __ASM_SH_POSIX_TYPES_H +#define __ASM_SH_POSIX_TYPES_H + +/* + * This file is generally used by user-level software, so you need to + * be a little careful about namespace pollution etc. Also, we cannot + * assume GCC is being used. + */ + +typedef unsigned long __kernel_ino_t; +typedef unsigned short __kernel_mode_t; +typedef unsigned short __kernel_nlink_t; +typedef long __kernel_off_t; +typedef int __kernel_pid_t; +typedef unsigned short __kernel_ipc_pid_t; +typedef unsigned short __kernel_uid_t; +typedef unsigned short __kernel_gid_t; +typedef unsigned int __kernel_size_t; +typedef int __kernel_ssize_t; +typedef int __kernel_ptrdiff_t; +typedef long __kernel_time_t; +typedef long __kernel_suseconds_t; +typedef long __kernel_clock_t; +typedef int __kernel_timer_t; +typedef int __kernel_clockid_t; +typedef int __kernel_daddr_t; +typedef char * __kernel_caddr_t; +typedef unsigned short __kernel_uid16_t; +typedef unsigned short __kernel_gid16_t; +typedef unsigned int __kernel_uid32_t; +typedef unsigned int __kernel_gid32_t; + +typedef unsigned short __kernel_old_uid_t; +typedef unsigned short __kernel_old_gid_t; +typedef unsigned short __kernel_old_dev_t; + +#ifdef __GNUC__ +typedef long long __kernel_loff_t; +#endif + +typedef struct { +#if defined(__KERNEL__) || defined(__USE_ALL) + int val[2]; +#else /* !defined(__KERNEL__) && !defined(__USE_ALL) */ + int __val[2]; +#endif /* !defined(__KERNEL__) && !defined(__USE_ALL) */ +} __kernel_fsid_t; + +#if defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2) + +#undef __FD_SET +static __inline__ void __FD_SET(unsigned long __fd, __kernel_fd_set *__fdsetp) +{ + unsigned long __tmp = __fd / __NFDBITS; + unsigned long __rem = __fd % __NFDBITS; + __fdsetp->fds_bits[__tmp] |= (1UL<<__rem); +} + +#undef __FD_CLR +static __inline__ void __FD_CLR(unsigned long __fd, __kernel_fd_set *__fdsetp) +{ + unsigned long __tmp = __fd / __NFDBITS; + unsigned long __rem = __fd % __NFDBITS; + __fdsetp->fds_bits[__tmp] &= ~(1UL<<__rem); +} + + +#undef __FD_ISSET +static __inline__ int __FD_ISSET(unsigned long __fd, const __kernel_fd_set *__p) +{ + unsigned long __tmp = __fd / __NFDBITS; + unsigned long __rem = __fd % __NFDBITS; + return (__p->fds_bits[__tmp] & (1UL<<__rem)) != 0; +} + +/* + * This will unroll the loop for the normal constant case (8 ints, + * for a 256-bit fd_set) + */ +#undef __FD_ZERO +static __inline__ void __FD_ZERO(__kernel_fd_set *__p) +{ + unsigned long *__tmp = __p->fds_bits; + int __i; + + if (__builtin_constant_p(__FDSET_LONGS)) { + switch (__FDSET_LONGS) { + case 16: + __tmp[ 0] = 0; __tmp[ 1] = 0; + __tmp[ 2] = 0; __tmp[ 3] = 0; + __tmp[ 4] = 0; __tmp[ 5] = 0; + __tmp[ 6] = 0; __tmp[ 7] = 0; + __tmp[ 8] = 0; __tmp[ 9] = 0; + __tmp[10] = 0; __tmp[11] = 0; + __tmp[12] = 0; __tmp[13] = 0; + __tmp[14] = 0; __tmp[15] = 0; + return; + + case 8: + __tmp[ 0] = 0; __tmp[ 1] = 0; + __tmp[ 2] = 0; __tmp[ 3] = 0; + __tmp[ 4] = 0; __tmp[ 5] = 0; + __tmp[ 6] = 0; __tmp[ 7] = 0; + return; + + case 4: + __tmp[ 0] = 0; __tmp[ 1] = 0; + __tmp[ 2] = 0; __tmp[ 3] = 0; + return; + } + } + __i = __FDSET_LONGS; + while (__i) { + __i--; + *__tmp = 0; + __tmp++; + } +} + +#endif /* defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2) */ + +#endif /* __ASM_SH_POSIX_TYPES_H */ diff --git a/arch/sh/include/asm/posix_types_64.h b/arch/sh/include/asm/posix_types_64.h new file mode 100644 index 00000000000..0620317a6f0 --- /dev/null +++ b/arch/sh/include/asm/posix_types_64.h @@ -0,0 +1,131 @@ +#ifndef __ASM_SH64_POSIX_TYPES_H +#define __ASM_SH64_POSIX_TYPES_H + +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * include/asm-sh64/posix_types.h + * + * Copyright (C) 2000, 2001 Paolo Alberelli + * Copyright (C) 2003 Paul Mundt + * + * This file is generally used by user-level software, so you need to + * be a little careful about namespace pollution etc. Also, we cannot + * assume GCC is being used. + */ + +typedef unsigned long __kernel_ino_t; +typedef unsigned short __kernel_mode_t; +typedef unsigned short __kernel_nlink_t; +typedef long __kernel_off_t; +typedef int __kernel_pid_t; +typedef unsigned short __kernel_ipc_pid_t; +typedef unsigned short __kernel_uid_t; +typedef unsigned short __kernel_gid_t; +typedef long unsigned int __kernel_size_t; +typedef int __kernel_ssize_t; +typedef int __kernel_ptrdiff_t; +typedef long __kernel_time_t; +typedef long __kernel_suseconds_t; +typedef long __kernel_clock_t; +typedef int __kernel_timer_t; +typedef int __kernel_clockid_t; +typedef int __kernel_daddr_t; +typedef char * __kernel_caddr_t; +typedef unsigned short __kernel_uid16_t; +typedef unsigned short __kernel_gid16_t; +typedef unsigned int __kernel_uid32_t; +typedef unsigned int __kernel_gid32_t; + +typedef unsigned short __kernel_old_uid_t; +typedef unsigned short __kernel_old_gid_t; +typedef unsigned short __kernel_old_dev_t; + +#ifdef __GNUC__ +typedef long long __kernel_loff_t; +#endif + +typedef struct { +#if defined(__KERNEL__) || defined(__USE_ALL) + int val[2]; +#else /* !defined(__KERNEL__) && !defined(__USE_ALL) */ + int __val[2]; +#endif /* !defined(__KERNEL__) && !defined(__USE_ALL) */ +} __kernel_fsid_t; + +#if defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2) + +#undef __FD_SET +static __inline__ void __FD_SET(unsigned long __fd, __kernel_fd_set *__fdsetp) +{ + unsigned long __tmp = __fd / __NFDBITS; + unsigned long __rem = __fd % __NFDBITS; + __fdsetp->fds_bits[__tmp] |= (1UL<<__rem); +} + +#undef __FD_CLR +static __inline__ void __FD_CLR(unsigned long __fd, __kernel_fd_set *__fdsetp) +{ + unsigned long __tmp = __fd / __NFDBITS; + unsigned long __rem = __fd % __NFDBITS; + __fdsetp->fds_bits[__tmp] &= ~(1UL<<__rem); +} + + +#undef __FD_ISSET +static __inline__ int __FD_ISSET(unsigned long __fd, const __kernel_fd_set *__p) +{ + unsigned long __tmp = __fd / __NFDBITS; + unsigned long __rem = __fd % __NFDBITS; + return (__p->fds_bits[__tmp] & (1UL<<__rem)) != 0; +} + +/* + * This will unroll the loop for the normal constant case (8 ints, + * for a 256-bit fd_set) + */ +#undef __FD_ZERO +static __inline__ void __FD_ZERO(__kernel_fd_set *__p) +{ + unsigned long *__tmp = __p->fds_bits; + int __i; + + if (__builtin_constant_p(__FDSET_LONGS)) { + switch (__FDSET_LONGS) { + case 16: + __tmp[ 0] = 0; __tmp[ 1] = 0; + __tmp[ 2] = 0; __tmp[ 3] = 0; + __tmp[ 4] = 0; __tmp[ 5] = 0; + __tmp[ 6] = 0; __tmp[ 7] = 0; + __tmp[ 8] = 0; __tmp[ 9] = 0; + __tmp[10] = 0; __tmp[11] = 0; + __tmp[12] = 0; __tmp[13] = 0; + __tmp[14] = 0; __tmp[15] = 0; + return; + + case 8: + __tmp[ 0] = 0; __tmp[ 1] = 0; + __tmp[ 2] = 0; __tmp[ 3] = 0; + __tmp[ 4] = 0; __tmp[ 5] = 0; + __tmp[ 6] = 0; __tmp[ 7] = 0; + return; + + case 4: + __tmp[ 0] = 0; __tmp[ 1] = 0; + __tmp[ 2] = 0; __tmp[ 3] = 0; + return; + } + } + __i = __FDSET_LONGS; + while (__i) { + __i--; + *__tmp = 0; + __tmp++; + } +} + +#endif /* defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2) */ + +#endif /* __ASM_SH64_POSIX_TYPES_H */ diff --git a/arch/sh/include/asm/processor.h b/arch/sh/include/asm/processor.h new file mode 100644 index 00000000000..15d9f92ca38 --- /dev/null +++ b/arch/sh/include/asm/processor.h @@ -0,0 +1,66 @@ +#ifndef __ASM_SH_PROCESSOR_H +#define __ASM_SH_PROCESSOR_H + +#include +#include + +#ifndef __ASSEMBLY__ +/* + * CPU type and hardware bug flags. Kept separately for each CPU. + * + * Each one of these also needs a CONFIG_CPU_SUBTYPE_xxx entry + * in arch/sh/mm/Kconfig, as well as an entry in arch/sh/kernel/setup.c + * for parsing the subtype in get_cpu_subtype(). + */ +enum cpu_type { + /* SH-2 types */ + CPU_SH7619, + + /* SH-2A types */ + CPU_SH7203, CPU_SH7206, CPU_SH7263, CPU_MXG, + + /* SH-3 types */ + CPU_SH7705, CPU_SH7706, CPU_SH7707, + CPU_SH7708, CPU_SH7708S, CPU_SH7708R, + CPU_SH7709, CPU_SH7709A, CPU_SH7710, CPU_SH7712, + CPU_SH7720, CPU_SH7721, CPU_SH7729, + + /* SH-4 types */ + CPU_SH7750, CPU_SH7750S, CPU_SH7750R, CPU_SH7751, CPU_SH7751R, + CPU_SH7760, CPU_SH4_202, CPU_SH4_501, + + /* SH-4A types */ + CPU_SH7763, CPU_SH7770, CPU_SH7780, CPU_SH7781, CPU_SH7785, + CPU_SH7723, CPU_SHX3, + + /* SH4AL-DSP types */ + CPU_SH7343, CPU_SH7722, CPU_SH7366, + + /* SH-5 types */ + CPU_SH5_101, CPU_SH5_103, + + /* Unknown subtype */ + CPU_SH_NONE +}; + +/* Forward decl */ +struct sh_cpuinfo; + +/* arch/sh/kernel/setup.c */ +const char *get_cpu_subtype(struct sh_cpuinfo *c); + +#ifdef CONFIG_VSYSCALL +int vsyscall_init(void); +#else +#define vsyscall_init() do { } while (0) +#endif + +#endif /* __ASSEMBLY__ */ + +#ifdef CONFIG_SUPERH32 +# include "processor_32.h" +#else +# include "processor_64.h" +#endif + +#endif /* __ASM_SH_PROCESSOR_H */ diff --git a/arch/sh/include/asm/processor_32.h b/arch/sh/include/asm/processor_32.h new file mode 100644 index 00000000000..0dadd75bd93 --- /dev/null +++ b/arch/sh/include/asm/processor_32.h @@ -0,0 +1,216 @@ +/* + * include/asm-sh/processor.h + * + * Copyright (C) 1999, 2000 Niibe Yutaka + * Copyright (C) 2002, 2003 Paul Mundt + */ + +#ifndef __ASM_SH_PROCESSOR_32_H +#define __ASM_SH_PROCESSOR_32_H +#ifdef __KERNEL__ + +#include +#include +#include +#include +#include + +/* + * Default implementation of macro that returns current + * instruction pointer ("program counter"). + */ +#define current_text_addr() ({ void *pc; __asm__("mova 1f, %0\n.align 2\n1:":"=z" (pc)); pc; }) + +/* Core Processor Version Register */ +#define CCN_PVR 0xff000030 +#define CCN_CVR 0xff000040 +#define CCN_PRR 0xff000044 + +struct sh_cpuinfo { + unsigned int type; + int cut_major, cut_minor; + unsigned long loops_per_jiffy; + unsigned long asid_cache; + + struct cache_info icache; /* Primary I-cache */ + struct cache_info dcache; /* Primary D-cache */ + struct cache_info scache; /* Secondary cache */ + + unsigned long flags; +} __attribute__ ((aligned(L1_CACHE_BYTES))); + +extern struct sh_cpuinfo cpu_data[]; +#define boot_cpu_data cpu_data[0] +#define current_cpu_data cpu_data[smp_processor_id()] +#define raw_current_cpu_data cpu_data[raw_smp_processor_id()] + +/* + * User space process size: 2GB. + * + * Since SH7709 and SH7750 have "area 7", we can't use 0x7c000000--0x7fffffff + */ +#define TASK_SIZE 0x7c000000UL + +#define STACK_TOP TASK_SIZE +#define STACK_TOP_MAX STACK_TOP + +/* This decides where the kernel will search for a free chunk of vm + * space during mmap's. + */ +#define TASK_UNMAPPED_BASE (TASK_SIZE / 3) + +/* + * Bit of SR register + * + * FD-bit: + * When it's set, it means the processor doesn't have right to use FPU, + * and it results exception when the floating operation is executed. + * + * IMASK-bit: + * Interrupt level mask + */ +#define SR_DSP 0x00001000 +#define SR_IMASK 0x000000f0 +#define SR_FD 0x00008000 + +/* + * FPU structure and data + */ + +struct sh_fpu_hard_struct { + unsigned long fp_regs[16]; + unsigned long xfp_regs[16]; + unsigned long fpscr; + unsigned long fpul; + + long status; /* software status information */ +}; + +/* Dummy fpu emulator */ +struct sh_fpu_soft_struct { + unsigned long fp_regs[16]; + unsigned long xfp_regs[16]; + unsigned long fpscr; + unsigned long fpul; + + unsigned char lookahead; + unsigned long entry_pc; +}; + +union sh_fpu_union { + struct sh_fpu_hard_struct hard; + struct sh_fpu_soft_struct soft; +}; + +struct thread_struct { + /* Saved registers when thread is descheduled */ + unsigned long sp; + unsigned long pc; + + /* Hardware debugging registers */ + unsigned long ubc_pc; + + /* floating point info */ + union sh_fpu_union fpu; +}; + +/* Count of active tasks with UBC settings */ +extern int ubc_usercnt; + +#define INIT_THREAD { \ + .sp = sizeof(init_stack) + (long) &init_stack, \ +} + +/* + * Do necessary setup to start up a newly executed thread. + */ +#define start_thread(regs, new_pc, new_sp) \ + set_fs(USER_DS); \ + regs->pr = 0; \ + regs->sr = SR_FD; /* User mode. */ \ + regs->pc = new_pc; \ + regs->regs[15] = new_sp + +/* Forward declaration, a strange C thing */ +struct task_struct; +struct mm_struct; + +/* Free all resources held by a thread. */ +extern void release_thread(struct task_struct *); + +/* Prepare to copy thread state - unlazy all lazy status */ +#define prepare_to_copy(tsk) do { } while (0) + +/* + * create a kernel thread without removing it from tasklists + */ +extern int kernel_thread(int (*fn)(void *), void * arg, unsigned long flags); + +/* Copy and release all segment info associated with a VM */ +#define copy_segments(p, mm) do { } while(0) +#define release_segments(mm) do { } while(0) + +/* + * FPU lazy state save handling. + */ + +static __inline__ void disable_fpu(void) +{ + unsigned long __dummy; + + /* Set FD flag in SR */ + __asm__ __volatile__("stc sr, %0\n\t" + "or %1, %0\n\t" + "ldc %0, sr" + : "=&r" (__dummy) + : "r" (SR_FD)); +} + +static __inline__ void enable_fpu(void) +{ + unsigned long __dummy; + + /* Clear out FD flag in SR */ + __asm__ __volatile__("stc sr, %0\n\t" + "and %1, %0\n\t" + "ldc %0, sr" + : "=&r" (__dummy) + : "r" (~SR_FD)); +} + +/* Double presision, NANS as NANS, rounding to nearest, no exceptions */ +#define FPSCR_INIT 0x00080000 + +#define FPSCR_CAUSE_MASK 0x0001f000 /* Cause bits */ +#define FPSCR_FLAG_MASK 0x0000007c /* Flag bits */ + +/* + * Return saved PC of a blocked thread. + */ +#define thread_saved_pc(tsk) (tsk->thread.pc) + +void show_trace(struct task_struct *tsk, unsigned long *sp, + struct pt_regs *regs); +extern unsigned long get_wchan(struct task_struct *p); + +#define KSTK_EIP(tsk) (task_pt_regs(tsk)->pc) +#define KSTK_ESP(tsk) (task_pt_regs(tsk)->regs[15]) + +#define cpu_sleep() __asm__ __volatile__ ("sleep" : : : "memory") +#define cpu_relax() barrier() + +#if defined(CONFIG_CPU_SH2A) || defined(CONFIG_CPU_SH3) || \ + defined(CONFIG_CPU_SH4) +#define PREFETCH_STRIDE L1_CACHE_BYTES +#define ARCH_HAS_PREFETCH +#define ARCH_HAS_PREFETCHW +static inline void prefetch(void *x) +{ + __asm__ __volatile__ ("pref @%0\n\t" : : "r" (x) : "memory"); +} + +#define prefetchw(x) prefetch(x) +#endif + +#endif /* __KERNEL__ */ +#endif /* __ASM_SH_PROCESSOR_32_H */ diff --git a/arch/sh/include/asm/processor_64.h b/arch/sh/include/asm/processor_64.h new file mode 100644 index 00000000000..770d5169983 --- /dev/null +++ b/arch/sh/include/asm/processor_64.h @@ -0,0 +1,275 @@ +#ifndef __ASM_SH_PROCESSOR_64_H +#define __ASM_SH_PROCESSOR_64_H + +/* + * include/asm-sh/processor_64.h + * + * Copyright (C) 2000, 2001 Paolo Alberelli + * Copyright (C) 2003 Paul Mundt + * Copyright (C) 2004 Richard Curnow + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#ifndef __ASSEMBLY__ + +#include +#include +#include +#include +#include +#include + +/* + * Default implementation of macro that returns current + * instruction pointer ("program counter"). + */ +#define current_text_addr() ({ \ +void *pc; \ +unsigned long long __dummy = 0; \ +__asm__("gettr tr0, %1\n\t" \ + "pta 4, tr0\n\t" \ + "gettr tr0, %0\n\t" \ + "ptabs %1, tr0\n\t" \ + :"=r" (pc), "=r" (__dummy) \ + : "1" (__dummy)); \ +pc; }) + +/* + * TLB information structure + * + * Defined for both I and D tlb, per-processor. + */ +struct tlb_info { + unsigned long long next; + unsigned long long first; + unsigned long long last; + + unsigned int entries; + unsigned int step; + + unsigned long flags; +}; + +struct sh_cpuinfo { + enum cpu_type type; + unsigned long loops_per_jiffy; + unsigned long asid_cache; + + unsigned int cpu_clock, master_clock, bus_clock, module_clock; + + /* Cache info */ + struct cache_info icache; + struct cache_info dcache; + struct cache_info scache; + + /* TLB info */ + struct tlb_info itlb; + struct tlb_info dtlb; + + unsigned long flags; +}; + +extern struct sh_cpuinfo cpu_data[]; +#define boot_cpu_data cpu_data[0] +#define current_cpu_data cpu_data[smp_processor_id()] +#define raw_current_cpu_data cpu_data[raw_smp_processor_id()] + +#endif + +/* + * User space process size: 2GB - 4k. + */ +#define TASK_SIZE 0x7ffff000UL + +#define STACK_TOP TASK_SIZE +#define STACK_TOP_MAX STACK_TOP + +/* This decides where the kernel will search for a free chunk of vm + * space during mmap's. + */ +#define TASK_UNMAPPED_BASE (TASK_SIZE / 3) + +/* + * Bit of SR register + * + * FD-bit: + * When it's set, it means the processor doesn't have right to use FPU, + * and it results exception when the floating operation is executed. + * + * IMASK-bit: + * Interrupt level mask + * + * STEP-bit: + * Single step bit + * + */ +#if defined(CONFIG_SH64_SR_WATCH) +#define SR_MMU 0x84000000 +#else +#define SR_MMU 0x80000000 +#endif + +#define SR_IMASK 0x000000f0 +#define SR_FD 0x00008000 +#define SR_SSTEP 0x08000000 + +#ifndef __ASSEMBLY__ + +/* + * FPU structure and data : require 8-byte alignment as we need to access it + with fld.p, fst.p + */ + +struct sh_fpu_hard_struct { + unsigned long fp_regs[64]; + unsigned int fpscr; + /* long status; * software status information */ +}; + +#if 0 +/* Dummy fpu emulator */ +struct sh_fpu_soft_struct { + unsigned long long fp_regs[32]; + unsigned int fpscr; + unsigned char lookahead; + unsigned long entry_pc; +}; +#endif + +union sh_fpu_union { + struct sh_fpu_hard_struct hard; + /* 'hard' itself only produces 32 bit alignment, yet we need + to access it using 64 bit load/store as well. */ + unsigned long long alignment_dummy; +}; + +struct thread_struct { + unsigned long sp; + unsigned long pc; + /* This stores the address of the pt_regs built during a context + switch, or of the register save area built for a kernel mode + exception. It is used for backtracing the stack of a sleeping task + or one that traps in kernel mode. */ + struct pt_regs *kregs; + /* This stores the address of the pt_regs constructed on entry from + user mode. It is a fixed value over the lifetime of a process, or + NULL for a kernel thread. */ + struct pt_regs *uregs; + + unsigned long trap_no, error_code; + unsigned long address; + /* Hardware debugging registers may come here */ + + /* floating point info */ + union sh_fpu_union fpu; +}; + +#define INIT_MMAP \ +{ &init_mm, 0, 0, NULL, PAGE_SHARED, VM_READ | VM_WRITE | VM_EXEC, 1, NULL, NULL } + +extern struct pt_regs fake_swapper_regs; + +#define INIT_THREAD { \ + .sp = sizeof(init_stack) + \ + (long) &init_stack, \ + .pc = 0, \ + .kregs = &fake_swapper_regs, \ + .uregs = NULL, \ + .trap_no = 0, \ + .error_code = 0, \ + .address = 0, \ + .fpu = { { { 0, } }, } \ +} + +/* + * Do necessary setup to start up a newly executed thread. + */ +#define SR_USER (SR_MMU | SR_FD) + +#define start_thread(regs, new_pc, new_sp) \ + set_fs(USER_DS); \ + regs->sr = SR_USER; /* User mode. */ \ + regs->pc = new_pc - 4; /* Compensate syscall exit */ \ + regs->pc |= 1; /* Set SHmedia ! */ \ + regs->regs[18] = 0; \ + regs->regs[15] = new_sp + +/* Forward declaration, a strange C thing */ +struct task_struct; +struct mm_struct; + +/* Free all resources held by a thread. */ +extern void release_thread(struct task_struct *); +/* + * create a kernel thread without removing it from tasklists + */ +extern int kernel_thread(int (*fn)(void *), void * arg, unsigned long flags); + + +/* Copy and release all segment info associated with a VM */ +#define copy_segments(p, mm) do { } while (0) +#define release_segments(mm) do { } while (0) +#define forget_segments() do { } while (0) +#define prepare_to_copy(tsk) do { } while (0) +/* + * FPU lazy state save handling. + */ + +static inline void disable_fpu(void) +{ + unsigned long long __dummy; + + /* Set FD flag in SR */ + __asm__ __volatile__("getcon " __SR ", %0\n\t" + "or %0, %1, %0\n\t" + "putcon %0, " __SR "\n\t" + : "=&r" (__dummy) + : "r" (SR_FD)); +} + +static inline void enable_fpu(void) +{ + unsigned long long __dummy; + + /* Clear out FD flag in SR */ + __asm__ __volatile__("getcon " __SR ", %0\n\t" + "and %0, %1, %0\n\t" + "putcon %0, " __SR "\n\t" + : "=&r" (__dummy) + : "r" (~SR_FD)); +} + +/* Round to nearest, no exceptions on inexact, overflow, underflow, + zero-divide, invalid. Configure option for whether to flush denorms to + zero, or except if a denorm is encountered. */ +#if defined(CONFIG_SH64_FPU_DENORM_FLUSH) +#define FPSCR_INIT 0x00040000 +#else +#define FPSCR_INIT 0x00000000 +#endif + +#ifdef CONFIG_SH_FPU +/* Initialise the FP state of a task */ +void fpinit(struct sh_fpu_hard_struct *fpregs); +#else +#define fpinit(fpregs) do { } while (0) +#endif + +extern struct task_struct *last_task_used_math; + +/* + * Return saved PC of a blocked thread. + */ +#define thread_saved_pc(tsk) (tsk->thread.pc) + +extern unsigned long get_wchan(struct task_struct *p); + +#define KSTK_EIP(tsk) ((tsk)->thread.pc) +#define KSTK_ESP(tsk) ((tsk)->thread.sp) + +#define cpu_relax() barrier() + +#endif /* __ASSEMBLY__ */ +#endif /* __ASM_SH_PROCESSOR_64_H */ diff --git a/arch/sh/include/asm/ptrace.h b/arch/sh/include/asm/ptrace.h new file mode 100644 index 00000000000..643ab5a7cf3 --- /dev/null +++ b/arch/sh/include/asm/ptrace.h @@ -0,0 +1,130 @@ +#ifndef __ASM_SH_PTRACE_H +#define __ASM_SH_PTRACE_H + +/* + * Copyright (C) 1999, 2000 Niibe Yutaka + * + */ +#if defined(__SH5__) +struct pt_regs { + unsigned long long pc; + unsigned long long sr; + unsigned long long syscall_nr; + unsigned long long regs[63]; + unsigned long long tregs[8]; + unsigned long long pad[2]; +}; +#else +/* + * GCC defines register number like this: + * ----------------------------- + * 0 - 15 are integer registers + * 17 - 22 are control/special registers + * 24 - 39 fp registers + * 40 - 47 xd registers + * 48 - fpscr register + * ----------------------------- + * + * We follows above, except: + * 16 --- program counter (PC) + * 22 --- syscall # + * 23 --- floating point communication register + */ +#define REG_REG0 0 +#define REG_REG15 15 + +#define REG_PC 16 + +#define REG_PR 17 +#define REG_SR 18 +#define REG_GBR 19 +#define REG_MACH 20 +#define REG_MACL 21 + +#define REG_SYSCALL 22 + +#define REG_FPREG0 23 +#define REG_FPREG15 38 +#define REG_XFREG0 39 +#define REG_XFREG15 54 + +#define REG_FPSCR 55 +#define REG_FPUL 56 + +/* + * This struct defines the way the registers are stored on the + * kernel stack during a system call or other kernel entry. + */ +struct pt_regs { + unsigned long regs[16]; + unsigned long pc; + unsigned long pr; + unsigned long sr; + unsigned long gbr; + unsigned long mach; + unsigned long macl; + long tra; +}; + +/* + * This struct defines the way the DSP registers are stored on the + * kernel stack during a system call or other kernel entry. + */ +struct pt_dspregs { + unsigned long a1; + unsigned long a0g; + unsigned long a1g; + unsigned long m0; + unsigned long m1; + unsigned long a0; + unsigned long x0; + unsigned long x1; + unsigned long y0; + unsigned long y1; + unsigned long dsr; + unsigned long rs; + unsigned long re; + unsigned long mod; +}; + +#define PTRACE_GETFDPIC 31 /* get the ELF fdpic loadmap address */ + +#define PTRACE_GETFDPIC_EXEC 0 /* [addr] request the executable loadmap */ +#define PTRACE_GETFDPIC_INTERP 1 /* [addr] request the interpreter loadmap */ + +#define PTRACE_GETDSPREGS 55 +#define PTRACE_SETDSPREGS 56 +#endif + +#ifdef __KERNEL__ +#include + +#define user_mode(regs) (((regs)->sr & 0x40000000)==0) +#define instruction_pointer(regs) ((unsigned long)(regs)->pc) + +extern void show_regs(struct pt_regs *); + +#ifdef CONFIG_SH_DSP +#define task_pt_regs(task) \ + ((struct pt_regs *) (task_stack_page(task) + THREAD_SIZE \ + - sizeof(struct pt_dspregs) - sizeof(unsigned long)) - 1) +#else +#define task_pt_regs(task) \ + ((struct pt_regs *) (task_stack_page(task) + THREAD_SIZE \ + - sizeof(unsigned long)) - 1) +#endif + +static inline unsigned long profile_pc(struct pt_regs *regs) +{ + unsigned long pc = instruction_pointer(regs); + +#ifdef P2SEG + if (pc >= P2SEG && pc < P3SEG) + pc -= 0x20000000; +#endif + + return pc; +} +#endif /* __KERNEL__ */ + +#endif /* __ASM_SH_PTRACE_H */ diff --git a/arch/sh/include/asm/push-switch.h b/arch/sh/include/asm/push-switch.h new file mode 100644 index 00000000000..4903f9e52dd --- /dev/null +++ b/arch/sh/include/asm/push-switch.h @@ -0,0 +1,31 @@ +#ifndef __ASM_SH_PUSH_SWITCH_H +#define __ASM_SH_PUSH_SWITCH_H + +#include +#include +#include +#include + +struct push_switch { + /* switch state */ + unsigned int state:1; + /* debounce timer */ + struct timer_list debounce; + /* workqueue */ + struct work_struct work; + /* platform device, for workqueue handler */ + struct platform_device *pdev; +}; + +struct push_switch_platform_info { + /* IRQ handler */ + irqreturn_t (*irq_handler)(int irq, void *data); + /* Special IRQ flags */ + unsigned int irq_flags; + /* Bit location of switch */ + unsigned int bit; + /* Symbolic switch name */ + const char *name; +}; + +#endif /* __ASM_SH_PUSH_SWITCH_H */ diff --git a/arch/sh/include/asm/r7780rp.h b/arch/sh/include/asm/r7780rp.h new file mode 100644 index 00000000000..306f7359f7d --- /dev/null +++ b/arch/sh/include/asm/r7780rp.h @@ -0,0 +1,198 @@ +#ifndef __ASM_SH_RENESAS_R7780RP_H +#define __ASM_SH_RENESAS_R7780RP_H + +/* Box specific addresses. */ +#if defined(CONFIG_SH_R7780MP) +#define PA_BCR 0xa4000000 /* FPGA */ +#define PA_SDPOW (-1) + +#define PA_IRLMSK (PA_BCR+0x0000) /* Interrupt Mask control */ +#define PA_IRLMON (PA_BCR+0x0002) /* Interrupt Status control */ +#define PA_IRLPRI1 (PA_BCR+0x0004) /* Interrupt Priorty 1 */ +#define PA_IRLPRI2 (PA_BCR+0x0006) /* Interrupt Priorty 2 */ +#define PA_IRLPRI3 (PA_BCR+0x0008) /* Interrupt Priorty 3 */ +#define PA_IRLPRI4 (PA_BCR+0x000a) /* Interrupt Priorty 4 */ +#define PA_RSTCTL (PA_BCR+0x000c) /* Reset Control */ +#define PA_PCIBD (PA_BCR+0x000e) /* PCI Board detect control */ +#define PA_PCICD (PA_BCR+0x0010) /* PCI Conector detect control */ +#define PA_EXTGIO (PA_BCR+0x0016) /* Extension GPIO Control */ +#define PA_IVDRMON (PA_BCR+0x0018) /* iVDR Moniter control */ +#define PA_IVDRCTL (PA_BCR+0x001a) /* iVDR control */ +#define PA_OBLED (PA_BCR+0x001c) /* On Board LED control */ +#define PA_OBSW (PA_BCR+0x001e) /* On Board Switch control */ +#define PA_AUDIOSEL (PA_BCR+0x0020) /* Sound Interface Select control */ +#define PA_EXTPLR (PA_BCR+0x001e) /* Extention Pin Polarity control */ +#define PA_TPCTL (PA_BCR+0x0100) /* Touch Panel Access control */ +#define PA_TPDCKCTL (PA_BCR+0x0102) /* Touch Panel Access data control */ +#define PA_TPCTLCLR (PA_BCR+0x0104) /* Touch Panel Access control */ +#define PA_TPXPOS (PA_BCR+0x0106) /* Touch Panel X position control */ +#define PA_TPYPOS (PA_BCR+0x0108) /* Touch Panel Y position control */ +#define PA_DBSW (PA_BCR+0x0200) /* Debug Board Switch control */ +#define PA_CFCTL (PA_BCR+0x0300) /* CF Timing control */ +#define PA_CFPOW (PA_BCR+0x0302) /* CF Power control */ +#define PA_CFCDINTCLR (PA_BCR+0x0304) /* CF Insert Interrupt clear */ +#define PA_SCSMR0 (PA_BCR+0x0400) /* SCIF0 Serial mode control */ +#define PA_SCBRR0 (PA_BCR+0x0404) /* SCIF0 Bit rate control */ +#define PA_SCSCR0 (PA_BCR+0x0408) /* SCIF0 Serial control */ +#define PA_SCFTDR0 (PA_BCR+0x040c) /* SCIF0 Send FIFO control */ +#define PA_SCFSR0 (PA_BCR+0x0410) /* SCIF0 Serial status control */ +#define PA_SCFRDR0 (PA_BCR+0x0414) /* SCIF0 Receive FIFO control */ +#define PA_SCFCR0 (PA_BCR+0x0418) /* SCIF0 FIFO control */ +#define PA_SCTFDR0 (PA_BCR+0x041c) /* SCIF0 Send FIFO data control */ +#define PA_SCRFDR0 (PA_BCR+0x0420) /* SCIF0 Receive FIFO data control */ +#define PA_SCSPTR0 (PA_BCR+0x0424) /* SCIF0 Serial Port control */ +#define PA_SCLSR0 (PA_BCR+0x0428) /* SCIF0 Line Status control */ +#define PA_SCRER0 (PA_BCR+0x042c) /* SCIF0 Serial Error control */ +#define PA_SCSMR1 (PA_BCR+0x0500) /* SCIF1 Serial mode control */ +#define PA_SCBRR1 (PA_BCR+0x0504) /* SCIF1 Bit rate control */ +#define PA_SCSCR1 (PA_BCR+0x0508) /* SCIF1 Serial control */ +#define PA_SCFTDR1 (PA_BCR+0x050c) /* SCIF1 Send FIFO control */ +#define PA_SCFSR1 (PA_BCR+0x0510) /* SCIF1 Serial status control */ +#define PA_SCFRDR1 (PA_BCR+0x0514) /* SCIF1 Receive FIFO control */ +#define PA_SCFCR1 (PA_BCR+0x0518) /* SCIF1 FIFO control */ +#define PA_SCTFDR1 (PA_BCR+0x051c) /* SCIF1 Send FIFO data control */ +#define PA_SCRFDR1 (PA_BCR+0x0520) /* SCIF1 Receive FIFO data control */ +#define PA_SCSPTR1 (PA_BCR+0x0524) /* SCIF1 Serial Port control */ +#define PA_SCLSR1 (PA_BCR+0x0528) /* SCIF1 Line Status control */ +#define PA_SCRER1 (PA_BCR+0x052c) /* SCIF1 Serial Error control */ +#define PA_SMCR (PA_BCR+0x0600) /* 2-wire Serial control */ +#define PA_SMSMADR (PA_BCR+0x0602) /* 2-wire Serial Slave control */ +#define PA_SMMR (PA_BCR+0x0604) /* 2-wire Serial Mode control */ +#define PA_SMSADR1 (PA_BCR+0x0606) /* 2-wire Serial Address1 control */ +#define PA_SMTRDR1 (PA_BCR+0x0646) /* 2-wire Serial Data1 control */ +#define PA_VERREG (PA_BCR+0x0700) /* FPGA Version Register */ +#define PA_POFF (PA_BCR+0x0800) /* System Power Off control */ +#define PA_PMR (PA_BCR+0x0900) /* */ + +#define IRLCNTR1 (PA_BCR + 0) /* Interrupt Control Register1 */ +#define IVDR_CK_ON 8 /* iVDR Clock ON */ + +#elif defined(CONFIG_SH_R7780RP) +#define PA_POFF (-1) + +#define PA_BCR 0xa5000000 /* FPGA */ +#define PA_IRLMSK (PA_BCR+0x0000) /* Interrupt Mask control */ +#define PA_IRLMON (PA_BCR+0x0002) /* Interrupt Status control */ +#define PA_SDPOW (PA_BCR+0x0004) /* SD Power control */ +#define PA_RSTCTL (PA_BCR+0x0006) /* Device Reset control */ +#define PA_PCIBD (PA_BCR+0x0008) /* PCI Board detect control */ +#define PA_PCICD (PA_BCR+0x000a) /* PCI Conector detect control */ +#define PA_ZIGIO1 (PA_BCR+0x000c) /* Zigbee IO control 1 */ +#define PA_ZIGIO2 (PA_BCR+0x000e) /* Zigbee IO control 2 */ +#define PA_ZIGIO3 (PA_BCR+0x0010) /* Zigbee IO control 3 */ +#define PA_ZIGIO4 (PA_BCR+0x0012) /* Zigbee IO control 4 */ +#define PA_IVDRMON (PA_BCR+0x0014) /* iVDR Moniter control */ +#define PA_IVDRCTL (PA_BCR+0x0016) /* iVDR control */ +#define PA_OBLED (PA_BCR+0x0018) /* On Board LED control */ +#define PA_OBSW (PA_BCR+0x001a) /* On Board Switch control */ +#define PA_AUDIOSEL (PA_BCR+0x001c) /* Sound Interface Select control */ +#define PA_EXTPLR (PA_BCR+0x001e) /* Extention Pin Polarity control */ +#define PA_TPCTL (PA_BCR+0x0100) /* Touch Panel Access control */ +#define PA_TPDCKCTL (PA_BCR+0x0102) /* Touch Panel Access data control */ +#define PA_TPCTLCLR (PA_BCR+0x0104) /* Touch Panel Access control */ +#define PA_TPXPOS (PA_BCR+0x0106) /* Touch Panel X position control */ +#define PA_TPYPOS (PA_BCR+0x0108) /* Touch Panel Y position control */ +#define PA_DBDET (PA_BCR+0x0200) /* Debug Board detect control */ +#define PA_DBDISPCTL (PA_BCR+0x0202) /* Debug Board Dot timing control */ +#define PA_DBSW (PA_BCR+0x0204) /* Debug Board Switch control */ +#define PA_CFCTL (PA_BCR+0x0300) /* CF Timing control */ +#define PA_CFPOW (PA_BCR+0x0302) /* CF Power control */ +#define PA_CFCDINTCLR (PA_BCR+0x0304) /* CF Insert Interrupt clear */ +#define PA_SCSMR (PA_BCR+0x0400) /* SCIF Serial mode control */ +#define PA_SCBRR (PA_BCR+0x0402) /* SCIF Bit rate control */ +#define PA_SCSCR (PA_BCR+0x0404) /* SCIF Serial control */ +#define PA_SCFDTR (PA_BCR+0x0406) /* SCIF Send FIFO control */ +#define PA_SCFSR (PA_BCR+0x0408) /* SCIF Serial status control */ +#define PA_SCFRDR (PA_BCR+0x040a) /* SCIF Receive FIFO control */ +#define PA_SCFCR (PA_BCR+0x040c) /* SCIF FIFO control */ +#define PA_SCFDR (PA_BCR+0x040e) /* SCIF FIFO data control */ +#define PA_SCLSR (PA_BCR+0x0412) /* SCIF Line Status control */ +#define PA_SMCR (PA_BCR+0x0500) /* 2-wire Serial control */ +#define PA_SMSMADR (PA_BCR+0x0502) /* 2-wire Serial Slave control */ +#define PA_SMMR (PA_BCR+0x0504) /* 2-wire Serial Mode control */ +#define PA_SMSADR1 (PA_BCR+0x0506) /* 2-wire Serial Address1 control */ +#define PA_SMTRDR1 (PA_BCR+0x0546) /* 2-wire Serial Data1 control */ +#define PA_VERREG (PA_BCR+0x0600) /* FPGA Version Register */ + +#define PA_AX88796L 0xa5800400 /* AX88796L Area */ +#define PA_SC1602BSLB 0xa6000000 /* SC1602BSLB Area */ +#define PA_IDE_OFFSET 0x1f0 /* CF IDE Offset */ +#define AX88796L_IO_BASE 0x1000 /* AX88796L IO Base Address */ + +#define IRLCNTR1 (PA_BCR + 0) /* Interrupt Control Register1 */ + +#define IVDR_CK_ON 8 /* iVDR Clock ON */ + +#elif defined(CONFIG_SH_R7785RP) +#define PA_BCR 0xa4000000 /* FPGA */ +#define PA_SDPOW (-1) + +#define PA_PCISCR (PA_BCR+0x0000) +#define PA_IRLPRA (PA_BCR+0x0002) +#define PA_IRLPRB (PA_BCR+0x0004) +#define PA_IRLPRC (PA_BCR+0x0006) +#define PA_IRLPRD (PA_BCR+0x0008) +#define IRLCNTR1 (PA_BCR+0x0010) +#define PA_IRLPRE (PA_BCR+0x000a) +#define PA_IRLPRF (PA_BCR+0x000c) +#define PA_EXIRLCR (PA_BCR+0x000e) +#define PA_IRLMCR1 (PA_BCR+0x0010) +#define PA_IRLMCR2 (PA_BCR+0x0012) +#define PA_IRLSSR1 (PA_BCR+0x0014) +#define PA_IRLSSR2 (PA_BCR+0x0016) +#define PA_CFTCR (PA_BCR+0x0100) +#define PA_CFPCR (PA_BCR+0x0102) +#define PA_PCICR (PA_BCR+0x0110) +#define PA_IVDRCTL (PA_BCR+0x0112) +#define PA_IVDRSR (PA_BCR+0x0114) +#define PA_PDRSTCR (PA_BCR+0x0116) +#define PA_POFF (PA_BCR+0x0120) +#define PA_LCDCR (PA_BCR+0x0130) +#define PA_TPCR (PA_BCR+0x0140) +#define PA_TPCKCR (PA_BCR+0x0142) +#define PA_TPRSTR (PA_BCR+0x0144) +#define PA_TPXPDR (PA_BCR+0x0146) +#define PA_TPYPDR (PA_BCR+0x0148) +#define PA_GPIOPFR (PA_BCR+0x0150) +#define PA_GPIODR (PA_BCR+0x0152) +#define PA_OBLED (PA_BCR+0x0154) +#define PA_SWSR (PA_BCR+0x0156) +#define PA_VERREG (PA_BCR+0x0158) +#define PA_SMCR (PA_BCR+0x0200) +#define PA_SMSMADR (PA_BCR+0x0202) +#define PA_SMMR (PA_BCR+0x0204) +#define PA_SMSADR1 (PA_BCR+0x0206) +#define PA_SMSADR32 (PA_BCR+0x0244) +#define PA_SMTRDR1 (PA_BCR+0x0246) +#define PA_SMTRDR16 (PA_BCR+0x0264) +#define PA_CU3MDR (PA_BCR+0x0300) +#define PA_CU5MDR (PA_BCR+0x0302) +#define PA_MMSR (PA_BCR+0x0400) + +#define IVDR_CK_ON 4 /* iVDR Clock ON */ +#endif + +#define HL_FPGA_IRQ_BASE 200 +#define HL_NR_IRL 15 + +#define IRQ_AX88796 (HL_FPGA_IRQ_BASE + 0) +#define IRQ_CF (HL_FPGA_IRQ_BASE + 1) +#define IRQ_PSW (HL_FPGA_IRQ_BASE + 2) +#define IRQ_EXT0 (HL_FPGA_IRQ_BASE + 3) +#define IRQ_EXT1 (HL_FPGA_IRQ_BASE + 4) +#define IRQ_EXT2 (HL_FPGA_IRQ_BASE + 5) +#define IRQ_EXT3 (HL_FPGA_IRQ_BASE + 6) +#define IRQ_EXT4 (HL_FPGA_IRQ_BASE + 7) +#define IRQ_EXT5 (HL_FPGA_IRQ_BASE + 8) +#define IRQ_EXT6 (HL_FPGA_IRQ_BASE + 9) +#define IRQ_EXT7 (HL_FPGA_IRQ_BASE + 10) +#define IRQ_SMBUS (HL_FPGA_IRQ_BASE + 11) +#define IRQ_TP (HL_FPGA_IRQ_BASE + 12) +#define IRQ_RTC (HL_FPGA_IRQ_BASE + 13) +#define IRQ_TH_ALERT (HL_FPGA_IRQ_BASE + 14) +#define IRQ_SCIF0 (HL_FPGA_IRQ_BASE + 15) +#define IRQ_SCIF1 (HL_FPGA_IRQ_BASE + 16) + +unsigned char *highlander_plat_irq_setup(void); + +#endif /* __ASM_SH_RENESAS_R7780RP */ diff --git a/arch/sh/include/asm/resource.h b/arch/sh/include/asm/resource.h new file mode 100644 index 00000000000..9c2499a86ec --- /dev/null +++ b/arch/sh/include/asm/resource.h @@ -0,0 +1,6 @@ +#ifndef __ASM_SH_RESOURCE_H +#define __ASM_SH_RESOURCE_H + +#include + +#endif /* __ASM_SH_RESOURCE_H */ diff --git a/arch/sh/include/asm/rtc.h b/arch/sh/include/asm/rtc.h new file mode 100644 index 00000000000..1813f4202a2 --- /dev/null +++ b/arch/sh/include/asm/rtc.h @@ -0,0 +1,16 @@ +#ifndef _ASM_RTC_H +#define _ASM_RTC_H + +extern void (*board_time_init)(void); +extern void (*rtc_sh_get_time)(struct timespec *); +extern int (*rtc_sh_set_time)(const time_t); + +#define RTC_CAP_4_DIGIT_YEAR (1 << 0) + +struct sh_rtc_platform_info { + unsigned long capabilities; +}; + +#include + +#endif /* _ASM_RTC_H */ diff --git a/arch/sh/include/asm/rts7751r2d.h b/arch/sh/include/asm/rts7751r2d.h new file mode 100644 index 00000000000..0a800157b82 --- /dev/null +++ b/arch/sh/include/asm/rts7751r2d.h @@ -0,0 +1,70 @@ +#ifndef __ASM_SH_RENESAS_RTS7751R2D_H +#define __ASM_SH_RENESAS_RTS7751R2D_H + +/* + * linux/include/asm-sh/renesas_rts7751r2d.h + * + * Copyright (C) 2000 Atom Create Engineering Co., Ltd. + * + * Renesas Technology Sales RTS7751R2D support + */ + +/* Board specific addresses. */ + +#define PA_BCR 0xa4000000 /* FPGA */ +#define PA_IRLMON 0xa4000002 /* Interrupt Status control */ +#define PA_CFCTL 0xa4000004 /* CF Timing control */ +#define PA_CFPOW 0xa4000006 /* CF Power control */ +#define PA_DISPCTL 0xa4000008 /* Display Timing control */ +#define PA_SDMPOW 0xa400000a /* SD Power control */ +#define PA_RTCCE 0xa400000c /* RTC(9701) Enable control */ +#define PA_PCICD 0xa400000e /* PCI Extention detect control */ +#define PA_VOYAGERRTS 0xa4000020 /* VOYAGER Reset control */ + +#define PA_R2D1_AXRST 0xa4000022 /* AX_LAN Reset control */ +#define PA_R2D1_CFRST 0xa4000024 /* CF Reset control */ +#define PA_R2D1_ADMRTS 0xa4000026 /* SD Reset control */ +#define PA_R2D1_EXTRST 0xa4000028 /* Extention Reset control */ +#define PA_R2D1_CFCDINTCLR 0xa400002a /* CF Insert Interrupt clear */ + +#define PA_R2DPLUS_CFRST 0xa4000022 /* CF Reset control */ +#define PA_R2DPLUS_ADMRTS 0xa4000024 /* SD Reset control */ +#define PA_R2DPLUS_EXTRST 0xa4000026 /* Extention Reset control */ +#define PA_R2DPLUS_CFCDINTCLR 0xa4000028 /* CF Insert Interrupt clear */ +#define PA_R2DPLUS_KEYCTLCLR 0xa400002a /* Key Interrupt clear */ + +#define PA_POWOFF 0xa4000030 /* Board Power OFF control */ +#define PA_VERREG 0xa4000032 /* FPGA Version Register */ +#define PA_INPORT 0xa4000034 /* KEY Input Port control */ +#define PA_OUTPORT 0xa4000036 /* LED control */ +#define PA_BVERREG 0xa4000038 /* Board Revision Register */ + +#define PA_AX88796L 0xaa000400 /* AX88796L Area */ +#define PA_VOYAGER 0xab000000 /* VOYAGER GX Area */ +#define PA_IDE_OFFSET 0x1f0 /* CF IDE Offset */ +#define AX88796L_IO_BASE 0x1000 /* AX88796L IO Base Address */ + +#define IRLCNTR1 (PA_BCR + 0) /* Interrupt Control Register1 */ + +#define R2D_FPGA_IRQ_BASE 100 + +#define IRQ_VOYAGER (R2D_FPGA_IRQ_BASE + 0) +#define IRQ_EXT (R2D_FPGA_IRQ_BASE + 1) +#define IRQ_TP (R2D_FPGA_IRQ_BASE + 2) +#define IRQ_RTC_T (R2D_FPGA_IRQ_BASE + 3) +#define IRQ_RTC_A (R2D_FPGA_IRQ_BASE + 4) +#define IRQ_SDCARD (R2D_FPGA_IRQ_BASE + 5) +#define IRQ_CF_CD (R2D_FPGA_IRQ_BASE + 6) +#define IRQ_CF_IDE (R2D_FPGA_IRQ_BASE + 7) +#define IRQ_AX88796 (R2D_FPGA_IRQ_BASE + 8) +#define IRQ_KEY (R2D_FPGA_IRQ_BASE + 9) +#define IRQ_PCI_INTA (R2D_FPGA_IRQ_BASE + 10) +#define IRQ_PCI_INTB (R2D_FPGA_IRQ_BASE + 11) +#define IRQ_PCI_INTC (R2D_FPGA_IRQ_BASE + 12) +#define IRQ_PCI_INTD (R2D_FPGA_IRQ_BASE + 13) + +/* arch/sh/boards/renesas/rts7751r2d/irq.c */ +void init_rts7751r2d_IRQ(void); +int rts7751r2d_irq_demux(int); + +#endif /* __ASM_SH_RENESAS_RTS7751R2D */ diff --git a/arch/sh/include/asm/rwsem.h b/arch/sh/include/asm/rwsem.h new file mode 100644 index 00000000000..1987f3ea7f1 --- /dev/null +++ b/arch/sh/include/asm/rwsem.h @@ -0,0 +1,188 @@ +/* + * include/asm-sh/rwsem.h: R/W semaphores for SH using the stuff + * in lib/rwsem.c. + */ + +#ifndef _ASM_SH_RWSEM_H +#define _ASM_SH_RWSEM_H + +#ifndef _LINUX_RWSEM_H +#error "please don't include asm/rwsem.h directly, use linux/rwsem.h instead" +#endif + +#ifdef __KERNEL__ +#include +#include +#include +#include + +/* + * the semaphore definition + */ +struct rw_semaphore { + long count; +#define RWSEM_UNLOCKED_VALUE 0x00000000 +#define RWSEM_ACTIVE_BIAS 0x00000001 +#define RWSEM_ACTIVE_MASK 0x0000ffff +#define RWSEM_WAITING_BIAS (-0x00010000) +#define RWSEM_ACTIVE_READ_BIAS RWSEM_ACTIVE_BIAS +#define RWSEM_ACTIVE_WRITE_BIAS (RWSEM_WAITING_BIAS + RWSEM_ACTIVE_BIAS) + spinlock_t wait_lock; + struct list_head wait_list; +#ifdef CONFIG_DEBUG_LOCK_ALLOC + struct lockdep_map dep_map; +#endif +}; + +#ifdef CONFIG_DEBUG_LOCK_ALLOC +# define __RWSEM_DEP_MAP_INIT(lockname) , .dep_map = { .name = #lockname } +#else +# define __RWSEM_DEP_MAP_INIT(lockname) +#endif + +#define __RWSEM_INITIALIZER(name) \ + { RWSEM_UNLOCKED_VALUE, SPIN_LOCK_UNLOCKED, \ + LIST_HEAD_INIT((name).wait_list) \ + __RWSEM_DEP_MAP_INIT(name) } + +#define DECLARE_RWSEM(name) \ + struct rw_semaphore name = __RWSEM_INITIALIZER(name) + +extern struct rw_semaphore *rwsem_down_read_failed(struct rw_semaphore *sem); +extern struct rw_semaphore *rwsem_down_write_failed(struct rw_semaphore *sem); +extern struct rw_semaphore *rwsem_wake(struct rw_semaphore *sem); +extern struct rw_semaphore *rwsem_downgrade_wake(struct rw_semaphore *sem); + +extern void __init_rwsem(struct rw_semaphore *sem, const char *name, + struct lock_class_key *key); + +#define init_rwsem(sem) \ +do { \ + static struct lock_class_key __key; \ + \ + __init_rwsem((sem), #sem, &__key); \ +} while (0) + +static inline void init_rwsem(struct rw_semaphore *sem) +{ + sem->count = RWSEM_UNLOCKED_VALUE; + spin_lock_init(&sem->wait_lock); + INIT_LIST_HEAD(&sem->wait_list); +} + +/* + * lock for reading + */ +static inline void __down_read(struct rw_semaphore *sem) +{ + if (atomic_inc_return((atomic_t *)(&sem->count)) > 0) + smp_wmb(); + else + rwsem_down_read_failed(sem); +} + +static inline int __down_read_trylock(struct rw_semaphore *sem) +{ + int tmp; + + while ((tmp = sem->count) >= 0) { + if (tmp == cmpxchg(&sem->count, tmp, + tmp + RWSEM_ACTIVE_READ_BIAS)) { + smp_wmb(); + return 1; + } + } + return 0; +} + +/* + * lock for writing + */ +static inline void __down_write(struct rw_semaphore *sem) +{ + int tmp; + + tmp = atomic_add_return(RWSEM_ACTIVE_WRITE_BIAS, + (atomic_t *)(&sem->count)); + if (tmp == RWSEM_ACTIVE_WRITE_BIAS) + smp_wmb(); + else + rwsem_down_write_failed(sem); +} + +static inline int __down_write_trylock(struct rw_semaphore *sem) +{ + int tmp; + + tmp = cmpxchg(&sem->count, RWSEM_UNLOCKED_VALUE, + RWSEM_ACTIVE_WRITE_BIAS); + smp_wmb(); + return tmp == RWSEM_UNLOCKED_VALUE; +} + +/* + * unlock after reading + */ +static inline void __up_read(struct rw_semaphore *sem) +{ + int tmp; + + smp_wmb(); + tmp = atomic_dec_return((atomic_t *)(&sem->count)); + if (tmp < -1 && (tmp & RWSEM_ACTIVE_MASK) == 0) + rwsem_wake(sem); +} + +/* + * unlock after writing + */ +static inline void __up_write(struct rw_semaphore *sem) +{ + smp_wmb(); + if (atomic_sub_return(RWSEM_ACTIVE_WRITE_BIAS, + (atomic_t *)(&sem->count)) < 0) + rwsem_wake(sem); +} + +/* + * implement atomic add functionality + */ +static inline void rwsem_atomic_add(int delta, struct rw_semaphore *sem) +{ + atomic_add(delta, (atomic_t *)(&sem->count)); +} + +/* + * downgrade write lock to read lock + */ +static inline void __downgrade_write(struct rw_semaphore *sem) +{ + int tmp; + + smp_wmb(); + tmp = atomic_add_return(-RWSEM_WAITING_BIAS, (atomic_t *)(&sem->count)); + if (tmp < 0) + rwsem_downgrade_wake(sem); +} + +static inline void __down_write_nested(struct rw_semaphore *sem, int subclass) +{ + __down_write(sem); +} + +/* + * implement exchange and add functionality + */ +static inline int rwsem_atomic_update(int delta, struct rw_semaphore *sem) +{ + smp_mb(); + return atomic_add_return(delta, (atomic_t *)(&sem->count)); +} + +static inline int rwsem_is_locked(struct rw_semaphore *sem) +{ + return (sem->count != 0); +} + +#endif /* __KERNEL__ */ +#endif /* _ASM_SH_RWSEM_H */ diff --git a/arch/sh/include/asm/scatterlist.h b/arch/sh/include/asm/scatterlist.h new file mode 100644 index 00000000000..2084d037369 --- /dev/null +++ b/arch/sh/include/asm/scatterlist.h @@ -0,0 +1,27 @@ +#ifndef __ASM_SH_SCATTERLIST_H +#define __ASM_SH_SCATTERLIST_H + +#include + +struct scatterlist { +#ifdef CONFIG_DEBUG_SG + unsigned long sg_magic; +#endif + unsigned long page_link; + unsigned int offset;/* for highmem, page offset */ + dma_addr_t dma_address; + unsigned int length; +}; + +#define ISA_DMA_THRESHOLD PHYS_ADDR_MASK + +/* These macros should be used after a pci_map_sg call has been done + * to get bus addresses of each of the SG entries and their lengths. + * You should only work with the number of sg entries pci_map_sg + * returns, or alternatively stop on the first sg_dma_len(sg) which + * is 0. + */ +#define sg_dma_address(sg) ((sg)->dma_address) +#define sg_dma_len(sg) ((sg)->length) + +#endif /* !(__ASM_SH_SCATTERLIST_H) */ diff --git a/arch/sh/include/asm/sdk7780.h b/arch/sh/include/asm/sdk7780.h new file mode 100644 index 00000000000..697dc865f21 --- /dev/null +++ b/arch/sh/include/asm/sdk7780.h @@ -0,0 +1,81 @@ +#ifndef __ASM_SH_RENESAS_SDK7780_H +#define __ASM_SH_RENESAS_SDK7780_H + +/* + * linux/include/asm-sh/sdk7780.h + * + * Renesas Solutions SH7780 SDK Support + * Copyright (C) 2008 Nicholas Beck + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include + +/* Box specific addresses. */ +#define SE_AREA0_WIDTH 4 /* Area0: 32bit */ +#define PA_ROM 0xa0000000 /* EPROM */ +#define PA_ROM_SIZE 0x00400000 /* EPROM size 4M byte */ +#define PA_FROM 0xa0800000 /* Flash-ROM */ +#define PA_FROM_SIZE 0x00400000 /* Flash-ROM size 4M byte */ +#define PA_EXT1 0xa4000000 +#define PA_EXT1_SIZE 0x04000000 +#define PA_SDRAM 0xa8000000 /* DDR-SDRAM(Area2/3) 128MB */ +#define PA_SDRAM_SIZE 0x08000000 + +#define PA_EXT4 0xb0000000 +#define PA_EXT4_SIZE 0x04000000 +#define PA_EXT_USER PA_EXT4 /* User Expansion Space */ + +#define PA_PERIPHERAL PA_AREA5_IO + +/* SRAM/Reserved */ +#define PA_RESERVED (PA_PERIPHERAL + 0) +/* FPGA base address */ +#define PA_FPGA (PA_PERIPHERAL + 0x01000000) +/* SMC LAN91C111 */ +#define PA_LAN (PA_PERIPHERAL + 0x01800000) + + +#define FPGA_SRSTR (PA_FPGA + 0x000) /* System reset */ +#define FPGA_IRQ0SR (PA_FPGA + 0x010) /* IRQ0 status */ +#define FPGA_IRQ0MR (PA_FPGA + 0x020) /* IRQ0 mask */ +#define FPGA_BDMR (PA_FPGA + 0x030) /* Board operating mode */ +#define FPGA_INTT0PRTR (PA_FPGA + 0x040) /* Interrupt test mode0 port */ +#define FPGA_INTT0SELR (PA_FPGA + 0x050) /* Int. test mode0 select */ +#define FPGA_INTT1POLR (PA_FPGA + 0x060) /* Int. test mode0 polarity */ +#define FPGA_NMIR (PA_FPGA + 0x070) /* NMI source */ +#define FPGA_NMIMR (PA_FPGA + 0x080) /* NMI mask */ +#define FPGA_IRQR (PA_FPGA + 0x090) /* IRQX source */ +#define FPGA_IRQMR (PA_FPGA + 0x0A0) /* IRQX mask */ +#define FPGA_SLEDR (PA_FPGA + 0x0B0) /* LED control */ +#define PA_LED FPGA_SLEDR +#define FPGA_MAPSWR (PA_FPGA + 0x0C0) /* Map switch */ +#define FPGA_FPVERR (PA_FPGA + 0x0D0) /* FPGA version */ +#define FPGA_FPDATER (PA_FPGA + 0x0E0) /* FPGA date */ +#define FPGA_RSE (PA_FPGA + 0x100) /* Reset source */ +#define FPGA_EASR (PA_FPGA + 0x110) /* External area select */ +#define FPGA_SPER (PA_FPGA + 0x120) /* Serial port enable */ +#define FPGA_IMSR (PA_FPGA + 0x130) /* Interrupt mode select */ +#define FPGA_PCIMR (PA_FPGA + 0x140) /* PCI Mode */ +#define FPGA_DIPSWMR (PA_FPGA + 0x150) /* DIPSW monitor */ +#define FPGA_FPODR (PA_FPGA + 0x160) /* Output port data */ +#define FPGA_ATAESR (PA_FPGA + 0x170) /* ATA extended bus status */ +#define FPGA_IRQPOLR (PA_FPGA + 0x180) /* IRQx polarity */ + + +#define SDK7780_NR_IRL 15 +/* IDE/ATA interrupt */ +#define IRQ_CFCARD 14 +/* SMC interrupt */ +#define IRQ_ETHERNET 6 + + +/* arch/sh/boards/renesas/sdk7780/irq.c */ +void init_sdk7780_IRQ(void); + +#define __IO_PREFIX sdk7780 +#include + +#endif /* __ASM_SH_RENESAS_SDK7780_H */ diff --git a/arch/sh/include/asm/se.h b/arch/sh/include/asm/se.h new file mode 100644 index 00000000000..eb23000e1bb --- /dev/null +++ b/arch/sh/include/asm/se.h @@ -0,0 +1,99 @@ +#ifndef __ASM_SH_HITACHI_SE_H +#define __ASM_SH_HITACHI_SE_H + +/* + * linux/include/asm-sh/hitachi_se.h + * + * Copyright (C) 2000 Kazumoto Kojima + * + * Hitachi SolutionEngine support + */ + +/* Box specific addresses. */ + +#define PA_ROM 0x00000000 /* EPROM */ +#define PA_ROM_SIZE 0x00400000 /* EPROM size 4M byte */ +#define PA_FROM 0x01000000 /* EPROM */ +#define PA_FROM_SIZE 0x00400000 /* EPROM size 4M byte */ +#define PA_EXT1 0x04000000 +#define PA_EXT1_SIZE 0x04000000 +#define PA_EXT2 0x08000000 +#define PA_EXT2_SIZE 0x04000000 +#define PA_SDRAM 0x0c000000 +#define PA_SDRAM_SIZE 0x04000000 + +#define PA_EXT4 0x12000000 +#define PA_EXT4_SIZE 0x02000000 +#define PA_EXT5 0x14000000 +#define PA_EXT5_SIZE 0x04000000 +#define PA_PCIC 0x18000000 /* MR-SHPC-01 PCMCIA */ + +#define PA_83902 0xb0000000 /* DP83902A */ +#define PA_83902_IF 0xb0040000 /* DP83902A remote io port */ +#define PA_83902_RST 0xb0080000 /* DP83902A reset port */ + +#define PA_SUPERIO 0xb0400000 /* SMC37C935A super io chip */ +#define PA_DIPSW0 0xb0800000 /* Dip switch 5,6 */ +#define PA_DIPSW1 0xb0800002 /* Dip switch 7,8 */ +#define PA_LED 0xb0c00000 /* LED */ +#if defined(CONFIG_CPU_SUBTYPE_SH7705) +#define PA_BCR 0xb0e00000 +#else +#define PA_BCR 0xb1400000 /* FPGA */ +#endif + +#define PA_MRSHPC 0xb83fffe0 /* MR-SHPC-01 PCMCIA controller */ +#define PA_MRSHPC_MW1 0xb8400000 /* MR-SHPC-01 memory window base */ +#define PA_MRSHPC_MW2 0xb8500000 /* MR-SHPC-01 attribute window base */ +#define PA_MRSHPC_IO 0xb8600000 /* MR-SHPC-01 I/O window base */ +#define MRSHPC_OPTION (PA_MRSHPC + 6) +#define MRSHPC_CSR (PA_MRSHPC + 8) +#define MRSHPC_ISR (PA_MRSHPC + 10) +#define MRSHPC_ICR (PA_MRSHPC + 12) +#define MRSHPC_CPWCR (PA_MRSHPC + 14) +#define MRSHPC_MW0CR1 (PA_MRSHPC + 16) +#define MRSHPC_MW1CR1 (PA_MRSHPC + 18) +#define MRSHPC_IOWCR1 (PA_MRSHPC + 20) +#define MRSHPC_MW0CR2 (PA_MRSHPC + 22) +#define MRSHPC_MW1CR2 (PA_MRSHPC + 24) +#define MRSHPC_IOWCR2 (PA_MRSHPC + 26) +#define MRSHPC_CDCR (PA_MRSHPC + 28) +#define MRSHPC_PCIC_INFO (PA_MRSHPC + 30) + +#define BCR_ILCRA (PA_BCR + 0) +#define BCR_ILCRB (PA_BCR + 2) +#define BCR_ILCRC (PA_BCR + 4) +#define BCR_ILCRD (PA_BCR + 6) +#define BCR_ILCRE (PA_BCR + 8) +#define BCR_ILCRF (PA_BCR + 10) +#define BCR_ILCRG (PA_BCR + 12) + +#if defined(CONFIG_CPU_SUBTYPE_SH7705) +#define IRQ_STNIC 12 +#define IRQ_CFCARD 14 +#else +#define IRQ_STNIC 10 +#define IRQ_CFCARD 7 +#endif + +/* SH Ether support (SH7710/SH7712) */ +/* Base address */ +#define SH_ETH0_BASE 0xA7000000 +#define SH_ETH1_BASE 0xA7000400 +/* PHY ID */ +#if defined(CONFIG_CPU_SUBTYPE_SH7710) +# define PHY_ID 0x00 +#elif defined(CONFIG_CPU_SUBTYPE_SH7712) +# define PHY_ID 0x01 +#endif +/* Ether IRQ */ +#define SH_ETH0_IRQ 80 +#define SH_ETH1_IRQ 81 +#define SH_TSU_IRQ 82 + +void init_se_IRQ(void); + +#define __IO_PREFIX se +#include + +#endif /* __ASM_SH_HITACHI_SE_H */ diff --git a/arch/sh/include/asm/se7206.h b/arch/sh/include/asm/se7206.h new file mode 100644 index 00000000000..698eb80389a --- /dev/null +++ b/arch/sh/include/asm/se7206.h @@ -0,0 +1,13 @@ +#ifndef __ASM_SH_SE7206_H +#define __ASM_SH_SE7206_H + +#define PA_SMSC 0x30000000 +#define PA_MRSHPC 0x34000000 +#define PA_LED 0x31400000 + +void init_se7206_IRQ(void); + +#define __IO_PREFIX se7206 +#include + +#endif /* __ASM_SH_SE7206_H */ diff --git a/arch/sh/include/asm/se7343.h b/arch/sh/include/asm/se7343.h new file mode 100644 index 00000000000..98458460e63 --- /dev/null +++ b/arch/sh/include/asm/se7343.h @@ -0,0 +1,149 @@ +#ifndef __ASM_SH_HITACHI_SE7343_H +#define __ASM_SH_HITACHI_SE7343_H + +/* + * include/asm-sh/se/se7343.h + * + * Copyright (C) 2003 Takashi Kusuda + * + * SH-Mobile SolutionEngine 7343 support + */ + +/* Box specific addresses. */ + +/* Area 0 */ +#define PA_ROM 0x00000000 /* EPROM */ +#define PA_ROM_SIZE 0x00400000 /* EPROM size 4M byte(Actually 2MB) */ +#define PA_FROM 0x00400000 /* Flash ROM */ +#define PA_FROM_SIZE 0x00400000 /* Flash size 4M byte */ +#define PA_SRAM 0x00800000 /* SRAM */ +#define PA_FROM_SIZE 0x00400000 /* SRAM size 4M byte */ +/* Area 1 */ +#define PA_EXT1 0x04000000 +#define PA_EXT1_SIZE 0x04000000 +/* Area 2 */ +#define PA_EXT2 0x08000000 +#define PA_EXT2_SIZE 0x04000000 +/* Area 3 */ +#define PA_SDRAM 0x0c000000 +#define PA_SDRAM_SIZE 0x04000000 +/* Area 4 */ +#define PA_PCIC 0x10000000 /* MR-SHPC-01 PCMCIA */ +#define PA_MRSHPC 0xb03fffe0 /* MR-SHPC-01 PCMCIA controller */ +#define PA_MRSHPC_MW1 0xb0400000 /* MR-SHPC-01 memory window base */ +#define PA_MRSHPC_MW2 0xb0500000 /* MR-SHPC-01 attribute window base */ +#define PA_MRSHPC_IO 0xb0600000 /* MR-SHPC-01 I/O window base */ +#define MRSHPC_OPTION (PA_MRSHPC + 6) +#define MRSHPC_CSR (PA_MRSHPC + 8) +#define MRSHPC_ISR (PA_MRSHPC + 10) +#define MRSHPC_ICR (PA_MRSHPC + 12) +#define MRSHPC_CPWCR (PA_MRSHPC + 14) +#define MRSHPC_MW0CR1 (PA_MRSHPC + 16) +#define MRSHPC_MW1CR1 (PA_MRSHPC + 18) +#define MRSHPC_IOWCR1 (PA_MRSHPC + 20) +#define MRSHPC_MW0CR2 (PA_MRSHPC + 22) +#define MRSHPC_MW1CR2 (PA_MRSHPC + 24) +#define MRSHPC_IOWCR2 (PA_MRSHPC + 26) +#define MRSHPC_CDCR (PA_MRSHPC + 28) +#define MRSHPC_PCIC_INFO (PA_MRSHPC + 30) +#define PA_LED 0xb0C00000 /* LED */ +#define LED_SHIFT 0 +#define PA_DIPSW 0xb0900000 /* Dip switch 31 */ +#define PA_CPLD_MODESET 0xb1400004 /* CPLD Mode set register */ +#define PA_CPLD_ST 0xb1400008 /* CPLD Interrupt status register */ +#define PA_CPLD_IMSK 0xb140000a /* CPLD Interrupt mask register */ +/* Area 5 */ +#define PA_EXT5 0x14000000 +#define PA_EXT5_SIZE 0x04000000 +/* Area 6 */ +#define PA_LCD1 0xb8000000 +#define PA_LCD2 0xb8800000 + +#define PORT_PACR 0xA4050100 +#define PORT_PBCR 0xA4050102 +#define PORT_PCCR 0xA4050104 +#define PORT_PDCR 0xA4050106 +#define PORT_PECR 0xA4050108 +#define PORT_PFCR 0xA405010A +#define PORT_PGCR 0xA405010C +#define PORT_PHCR 0xA405010E +#define PORT_PJCR 0xA4050110 +#define PORT_PKCR 0xA4050112 +#define PORT_PLCR 0xA4050114 +#define PORT_PMCR 0xA4050116 +#define PORT_PNCR 0xA4050118 +#define PORT_PQCR 0xA405011A +#define PORT_PRCR 0xA405011C +#define PORT_PSCR 0xA405011E +#define PORT_PTCR 0xA4050140 +#define PORT_PUCR 0xA4050142 +#define PORT_PVCR 0xA4050144 +#define PORT_PWCR 0xA4050146 +#define PORT_PYCR 0xA4050148 +#define PORT_PZCR 0xA405014A + +#define PORT_PSELA 0xA405014C +#define PORT_PSELB 0xA405014E +#define PORT_PSELC 0xA4050150 +#define PORT_PSELD 0xA4050152 +#define PORT_PSELE 0xA4050154 + +#define PORT_HIZCRA 0xA4050156 +#define PORT_HIZCRB 0xA4050158 +#define PORT_HIZCRC 0xA405015C + +#define PORT_DRVCR 0xA4050180 + +#define PORT_PADR 0xA4050120 +#define PORT_PBDR 0xA4050122 +#define PORT_PCDR 0xA4050124 +#define PORT_PDDR 0xA4050126 +#define PORT_PEDR 0xA4050128 +#define PORT_PFDR 0xA405012A +#define PORT_PGDR 0xA405012C +#define PORT_PHDR 0xA405012E +#define PORT_PJDR 0xA4050130 +#define PORT_PKDR 0xA4050132 +#define PORT_PLDR 0xA4050134 +#define PORT_PMDR 0xA4050136 +#define PORT_PNDR 0xA4050138 +#define PORT_PQDR 0xA405013A +#define PORT_PRDR 0xA405013C +#define PORT_PTDR 0xA4050160 +#define PORT_PUDR 0xA4050162 +#define PORT_PVDR 0xA4050164 +#define PORT_PWDR 0xA4050166 +#define PORT_PYDR 0xA4050168 + +#define FPGA_IN 0xb1400000 +#define FPGA_OUT 0xb1400002 + +#define __IO_PREFIX sh7343se +#include + +#define IRQ0_IRQ 32 +#define IRQ1_IRQ 33 +#define IRQ4_IRQ 36 +#define IRQ5_IRQ 37 + +#define SE7343_FPGA_IRQ_MRSHPC0 0 +#define SE7343_FPGA_IRQ_MRSHPC1 1 +#define SE7343_FPGA_IRQ_MRSHPC2 2 +#define SE7343_FPGA_IRQ_MRSHPC3 3 +#define SE7343_FPGA_IRQ_SMC 6 /* EXT_IRQ2 */ +#define SE7343_FPGA_IRQ_USB 8 + +#define SE7343_FPGA_IRQ_NR 11 +#define SE7343_FPGA_IRQ_BASE 120 + +#define MRSHPC_IRQ3 (SE7343_FPGA_IRQ_BASE + SE7343_FPGA_IRQ_MRSHPC3) +#define MRSHPC_IRQ2 (SE7343_FPGA_IRQ_BASE + SE7343_FPGA_IRQ_MRSHPC2) +#define MRSHPC_IRQ1 (SE7343_FPGA_IRQ_BASE + SE7343_FPGA_IRQ_MRSHPC1) +#define MRSHPC_IRQ0 (SE7343_FPGA_IRQ_BASE + SE7343_FPGA_IRQ_MRSHPC0) +#define SMC_IRQ (SE7343_FPGA_IRQ_BASE + SE7343_FPGA_IRQ_SMC) +#define USB_IRQ (SE7343_FPGA_IRQ_BASE + SE7343_FPGA_IRQ_USB) + +/* arch/sh/boards/se/7343/irq.c */ +void init_7343se_IRQ(void); + +#endif /* __ASM_SH_HITACHI_SE7343_H */ diff --git a/arch/sh/include/asm/se7721.h b/arch/sh/include/asm/se7721.h new file mode 100644 index 00000000000..b957f604119 --- /dev/null +++ b/arch/sh/include/asm/se7721.h @@ -0,0 +1,70 @@ +/* + * Copyright (C) 2008 Renesas Solutions Corp. + * + * Hitachi UL SolutionEngine 7721 Support. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + */ + +#ifndef __ASM_SH_SE7721_H +#define __ASM_SH_SE7721_H +#include + +/* Box specific addresses. */ +#define SE_AREA0_WIDTH 2 /* Area0: 32bit */ +#define PA_ROM 0xa0000000 /* EPROM */ +#define PA_ROM_SIZE 0x00200000 /* EPROM size 2M byte */ +#define PA_FROM 0xa1000000 /* Flash-ROM */ +#define PA_FROM_SIZE 0x01000000 /* Flash-ROM size 16M byte */ +#define PA_EXT1 0xa4000000 +#define PA_EXT1_SIZE 0x04000000 +#define PA_SDRAM 0xaC000000 /* SDRAM(Area3) 64MB */ +#define PA_SDRAM_SIZE 0x04000000 + +#define PA_EXT4 0xb0000000 +#define PA_EXT4_SIZE 0x04000000 + +#define PA_PERIPHERAL 0xB8000000 + +#define PA_PCIC PA_PERIPHERAL +#define PA_MRSHPC (PA_PERIPHERAL + 0x003fffe0) +#define PA_MRSHPC_MW1 (PA_PERIPHERAL + 0x00400000) +#define PA_MRSHPC_MW2 (PA_PERIPHERAL + 0x00500000) +#define PA_MRSHPC_IO (PA_PERIPHERAL + 0x00600000) +#define MRSHPC_OPTION (PA_MRSHPC + 6) +#define MRSHPC_CSR (PA_MRSHPC + 8) +#define MRSHPC_ISR (PA_MRSHPC + 10) +#define MRSHPC_ICR (PA_MRSHPC + 12) +#define MRSHPC_CPWCR (PA_MRSHPC + 14) +#define MRSHPC_MW0CR1 (PA_MRSHPC + 16) +#define MRSHPC_MW1CR1 (PA_MRSHPC + 18) +#define MRSHPC_IOWCR1 (PA_MRSHPC + 20) +#define MRSHPC_MW0CR2 (PA_MRSHPC + 22) +#define MRSHPC_MW1CR2 (PA_MRSHPC + 24) +#define MRSHPC_IOWCR2 (PA_MRSHPC + 26) +#define MRSHPC_CDCR (PA_MRSHPC + 28) +#define MRSHPC_PCIC_INFO (PA_MRSHPC + 30) + +#define PA_LED 0xB6800000 /* 8bit LED */ +#define PA_FPGA 0xB7000000 /* FPGA base address */ + +#define MRSHPC_IRQ0 10 + +#define FPGA_ILSR1 (PA_FPGA + 0x02) +#define FPGA_ILSR2 (PA_FPGA + 0x03) +#define FPGA_ILSR3 (PA_FPGA + 0x04) +#define FPGA_ILSR4 (PA_FPGA + 0x05) +#define FPGA_ILSR5 (PA_FPGA + 0x06) +#define FPGA_ILSR6 (PA_FPGA + 0x07) +#define FPGA_ILSR7 (PA_FPGA + 0x08) +#define FPGA_ILSR8 (PA_FPGA + 0x09) + +void init_se7721_IRQ(void); + +#define __IO_PREFIX se7721 +#include + +#endif /* __ASM_SH_SE7721_H */ diff --git a/arch/sh/include/asm/se7722.h b/arch/sh/include/asm/se7722.h new file mode 100644 index 00000000000..e971d9a82f4 --- /dev/null +++ b/arch/sh/include/asm/se7722.h @@ -0,0 +1,112 @@ +#ifndef __ASM_SH_SE7722_H +#define __ASM_SH_SE7722_H + +/* + * linux/include/asm-sh/se7722.h + * + * Copyright (C) 2007 Nobuhiro Iwamatsu + * + * Hitachi UL SolutionEngine 7722 Support. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + */ +#include + +/* Box specific addresses. */ +#define SE_AREA0_WIDTH 4 /* Area0: 32bit */ +#define PA_ROM 0xa0000000 /* EPROM */ +#define PA_ROM_SIZE 0x00200000 /* EPROM size 2M byte */ +#define PA_FROM 0xa1000000 /* Flash-ROM */ +#define PA_FROM_SIZE 0x01000000 /* Flash-ROM size 16M byte */ +#define PA_EXT1 0xa4000000 +#define PA_EXT1_SIZE 0x04000000 +#define PA_SDRAM 0xaC000000 /* DDR-SDRAM(Area3) 64MB */ +#define PA_SDRAM_SIZE 0x04000000 + +#define PA_EXT4 0xb0000000 +#define PA_EXT4_SIZE 0x04000000 + +#define PA_PERIPHERAL 0xB0000000 + +#define PA_PCIC PA_PERIPHERAL /* MR-SHPC-01 PCMCIA */ +#define PA_MRSHPC (PA_PERIPHERAL + 0x003fffe0) /* MR-SHPC-01 PCMCIA controller */ +#define PA_MRSHPC_MW1 (PA_PERIPHERAL + 0x00400000) /* MR-SHPC-01 memory window base */ +#define PA_MRSHPC_MW2 (PA_PERIPHERAL + 0x00500000) /* MR-SHPC-01 attribute window base */ +#define PA_MRSHPC_IO (PA_PERIPHERAL + 0x00600000) /* MR-SHPC-01 I/O window base */ +#define MRSHPC_OPTION (PA_MRSHPC + 6) +#define MRSHPC_CSR (PA_MRSHPC + 8) +#define MRSHPC_ISR (PA_MRSHPC + 10) +#define MRSHPC_ICR (PA_MRSHPC + 12) +#define MRSHPC_CPWCR (PA_MRSHPC + 14) +#define MRSHPC_MW0CR1 (PA_MRSHPC + 16) +#define MRSHPC_MW1CR1 (PA_MRSHPC + 18) +#define MRSHPC_IOWCR1 (PA_MRSHPC + 20) +#define MRSHPC_MW0CR2 (PA_MRSHPC + 22) +#define MRSHPC_MW1CR2 (PA_MRSHPC + 24) +#define MRSHPC_IOWCR2 (PA_MRSHPC + 26) +#define MRSHPC_CDCR (PA_MRSHPC + 28) +#define MRSHPC_PCIC_INFO (PA_MRSHPC + 30) + +#define PA_LED (PA_PERIPHERAL + 0x00800000) /* 8bit LED */ +#define PA_FPGA (PA_PERIPHERAL + 0x01800000) /* FPGA base address */ + +#define PA_LAN (PA_AREA6_IO + 0) /* SMC LAN91C111 */ +/* GPIO */ +#define FPGA_IN 0xb1840000UL +#define FPGA_OUT 0xb1840004UL + +#define PORT_PECR 0xA4050108UL +#define PORT_PJCR 0xA4050110UL +#define PORT_PSELD 0xA4050154UL +#define PORT_PSELB 0xA4050150UL + +#define PORT_PSELC 0xA4050152UL +#define PORT_PKCR 0xA4050112UL +#define PORT_PHCR 0xA405010EUL +#define PORT_PLCR 0xA4050114UL +#define PORT_PMCR 0xA4050116UL +#define PORT_PRCR 0xA405011CUL +#define PORT_PXCR 0xA4050148UL +#define PORT_PSELA 0xA405014EUL +#define PORT_PYCR 0xA405014AUL +#define PORT_PZCR 0xA405014CUL +#define PORT_HIZCRA 0xA4050158UL +#define PORT_HIZCRC 0xA405015CUL + +/* IRQ */ +#define IRQ0_IRQ 32 +#define IRQ1_IRQ 33 + +#define IRQ01_MODE 0xb1800000 +#define IRQ01_STS 0xb1800004 +#define IRQ01_MASK 0xb1800008 + +/* Bits in IRQ01_* registers */ + +#define SE7722_FPGA_IRQ_USB 0 /* IRQ0 */ +#define SE7722_FPGA_IRQ_SMC 1 /* IRQ0 */ +#define SE7722_FPGA_IRQ_MRSHPC0 2 /* IRQ1 */ +#define SE7722_FPGA_IRQ_MRSHPC1 3 /* IRQ1 */ +#define SE7722_FPGA_IRQ_MRSHPC2 4 /* IRQ1 */ +#define SE7722_FPGA_IRQ_MRSHPC3 5 /* IRQ1 */ + +#define SE7722_FPGA_IRQ_NR 6 +#define SE7722_FPGA_IRQ_BASE 110 + +#define MRSHPC_IRQ3 (SE7722_FPGA_IRQ_BASE + SE7722_FPGA_IRQ_MRSHPC3) +#define MRSHPC_IRQ2 (SE7722_FPGA_IRQ_BASE + SE7722_FPGA_IRQ_MRSHPC2) +#define MRSHPC_IRQ1 (SE7722_FPGA_IRQ_BASE + SE7722_FPGA_IRQ_MRSHPC1) +#define MRSHPC_IRQ0 (SE7722_FPGA_IRQ_BASE + SE7722_FPGA_IRQ_MRSHPC0) +#define SMC_IRQ (SE7722_FPGA_IRQ_BASE + SE7722_FPGA_IRQ_SMC) +#define USB_IRQ (SE7722_FPGA_IRQ_BASE + SE7722_FPGA_IRQ_USB) + +/* arch/sh/boards/se/7722/irq.c */ +void init_se7722_IRQ(void); + +#define __IO_PREFIX se7722 +#include + +#endif /* __ASM_SH_SE7722_H */ diff --git a/arch/sh/include/asm/se7751.h b/arch/sh/include/asm/se7751.h new file mode 100644 index 00000000000..b36792ac5d6 --- /dev/null +++ b/arch/sh/include/asm/se7751.h @@ -0,0 +1,73 @@ +#ifndef __ASM_SH_HITACHI_7751SE_H +#define __ASM_SH_HITACHI_7751SE_H + +/* + * linux/include/asm-sh/hitachi_7751se.h + * + * Copyright (C) 2000 Kazumoto Kojima + * + * Hitachi SolutionEngine support + + * Modified for 7751 Solution Engine by + * Ian da Silva and Jeremy Siegel, 2001. + */ + +/* Box specific addresses. */ + +#define PA_ROM 0x00000000 /* EPROM */ +#define PA_ROM_SIZE 0x00400000 /* EPROM size 4M byte */ +#define PA_FROM 0x01000000 /* EPROM */ +#define PA_FROM_SIZE 0x00400000 /* EPROM size 4M byte */ +#define PA_EXT1 0x04000000 +#define PA_EXT1_SIZE 0x04000000 +#define PA_EXT2 0x08000000 +#define PA_EXT2_SIZE 0x04000000 +#define PA_SDRAM 0x0c000000 +#define PA_SDRAM_SIZE 0x04000000 + +#define PA_EXT4 0x12000000 +#define PA_EXT4_SIZE 0x02000000 +#define PA_EXT5 0x14000000 +#define PA_EXT5_SIZE 0x04000000 +#define PA_PCIC 0x18000000 /* MR-SHPC-01 PCMCIA */ + +#define PA_DIPSW0 0xb9000000 /* Dip switch 5,6 */ +#define PA_DIPSW1 0xb9000002 /* Dip switch 7,8 */ +#define PA_LED 0xba000000 /* LED */ +#define PA_BCR 0xbb000000 /* FPGA on the MS7751SE01 */ + +#define PA_MRSHPC 0xb83fffe0 /* MR-SHPC-01 PCMCIA controller */ +#define PA_MRSHPC_MW1 0xb8400000 /* MR-SHPC-01 memory window base */ +#define PA_MRSHPC_MW2 0xb8500000 /* MR-SHPC-01 attribute window base */ +#define PA_MRSHPC_IO 0xb8600000 /* MR-SHPC-01 I/O window base */ +#define MRSHPC_MODE (PA_MRSHPC + 4) +#define MRSHPC_OPTION (PA_MRSHPC + 6) +#define MRSHPC_CSR (PA_MRSHPC + 8) +#define MRSHPC_ISR (PA_MRSHPC + 10) +#define MRSHPC_ICR (PA_MRSHPC + 12) +#define MRSHPC_CPWCR (PA_MRSHPC + 14) +#define MRSHPC_MW0CR1 (PA_MRSHPC + 16) +#define MRSHPC_MW1CR1 (PA_MRSHPC + 18) +#define MRSHPC_IOWCR1 (PA_MRSHPC + 20) +#define MRSHPC_MW0CR2 (PA_MRSHPC + 22) +#define MRSHPC_MW1CR2 (PA_MRSHPC + 24) +#define MRSHPC_IOWCR2 (PA_MRSHPC + 26) +#define MRSHPC_CDCR (PA_MRSHPC + 28) +#define MRSHPC_PCIC_INFO (PA_MRSHPC + 30) + +#define BCR_ILCRA (PA_BCR + 0) +#define BCR_ILCRB (PA_BCR + 2) +#define BCR_ILCRC (PA_BCR + 4) +#define BCR_ILCRD (PA_BCR + 6) +#define BCR_ILCRE (PA_BCR + 8) +#define BCR_ILCRF (PA_BCR + 10) +#define BCR_ILCRG (PA_BCR + 12) + +#define IRQ_79C973 13 + +void init_7751se_IRQ(void); + +#define __IO_PREFIX sh7751se +#include + +#endif /* __ASM_SH_HITACHI_7751SE_H */ diff --git a/arch/sh/include/asm/se7780.h b/arch/sh/include/asm/se7780.h new file mode 100644 index 00000000000..40e9b41458c --- /dev/null +++ b/arch/sh/include/asm/se7780.h @@ -0,0 +1,108 @@ +#ifndef __ASM_SH_SE7780_H +#define __ASM_SH_SE7780_H + +/* + * linux/include/asm-sh/se7780.h + * + * Copyright (C) 2006,2007 Nobuhiro Iwamatsu + * + * Hitachi UL SolutionEngine 7780 Support. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include + +/* Box specific addresses. */ +#define SE_AREA0_WIDTH 4 /* Area0: 32bit */ +#define PA_ROM 0xa0000000 /* EPROM */ +#define PA_ROM_SIZE 0x00400000 /* EPROM size 4M byte */ +#define PA_FROM 0xa1000000 /* Flash-ROM */ +#define PA_FROM_SIZE 0x01000000 /* Flash-ROM size 16M byte */ +#define PA_EXT1 0xa4000000 +#define PA_EXT1_SIZE 0x04000000 +#define PA_SM501 PA_EXT1 /* Graphic IC (SM501) */ +#define PA_SM501_SIZE PA_EXT1_SIZE /* Graphic IC (SM501) */ +#define PA_SDRAM 0xa8000000 /* DDR-SDRAM(Area2/3) 128MB */ +#define PA_SDRAM_SIZE 0x08000000 + +#define PA_EXT4 0xb0000000 +#define PA_EXT4_SIZE 0x04000000 +#define PA_EXT_FLASH PA_EXT4 /* Expansion Flash-ROM */ + +#define PA_PERIPHERAL PA_AREA6_IO /* SW6-6=ON */ + +#define PA_LAN (PA_PERIPHERAL + 0) /* SMC LAN91C111 */ +#define PA_LED_DISP (PA_PERIPHERAL + 0x02000000) /* 8words LED Display */ +#define DISP_CHAR_RAM (7 << 3) +#define DISP_SEL0_ADDR (DISP_CHAR_RAM + 0) +#define DISP_SEL1_ADDR (DISP_CHAR_RAM + 1) +#define DISP_SEL2_ADDR (DISP_CHAR_RAM + 2) +#define DISP_SEL3_ADDR (DISP_CHAR_RAM + 3) +#define DISP_SEL4_ADDR (DISP_CHAR_RAM + 4) +#define DISP_SEL5_ADDR (DISP_CHAR_RAM + 5) +#define DISP_SEL6_ADDR (DISP_CHAR_RAM + 6) +#define DISP_SEL7_ADDR (DISP_CHAR_RAM + 7) + +#define DISP_UDC_RAM (5 << 3) +#define PA_FPGA (PA_PERIPHERAL + 0x03000000) /* FPGA base address */ + +/* FPGA register address and bit */ +#define FPGA_SFTRST (PA_FPGA + 0) /* Soft reset register */ +#define FPGA_INTMSK1 (PA_FPGA + 2) /* Interrupt Mask register 1 */ +#define FPGA_INTMSK2 (PA_FPGA + 4) /* Interrupt Mask register 2 */ +#define FPGA_INTSEL1 (PA_FPGA + 6) /* Interrupt select register 1 */ +#define FPGA_INTSEL2 (PA_FPGA + 8) /* Interrupt select register 2 */ +#define FPGA_INTSEL3 (PA_FPGA + 10) /* Interrupt select register 3 */ +#define FPGA_PCI_INTSEL1 (PA_FPGA + 12) /* PCI Interrupt select register 1 */ +#define FPGA_PCI_INTSEL2 (PA_FPGA + 14) /* PCI Interrupt select register 2 */ +#define FPGA_INTSET (PA_FPGA + 16) /* IRQ/IRL select register */ +#define FPGA_INTSTS1 (PA_FPGA + 18) /* Interrupt status register 1 */ +#define FPGA_INTSTS2 (PA_FPGA + 20) /* Interrupt status register 2 */ +#define FPGA_REQSEL (PA_FPGA + 22) /* REQ/GNT select register */ +#define FPGA_DBG_LED (PA_FPGA + 32) /* Debug LED(D-LED[8:1] */ +#define PA_LED FPGA_DBG_LED +#define FPGA_IVDRID (PA_FPGA + 36) /* iVDR ID Register */ +#define FPGA_IVDRPW (PA_FPGA + 38) /* iVDR Power ON Register */ +#define FPGA_MMCID (PA_FPGA + 40) /* MMC ID Register */ + +/* FPGA INTSEL position */ +/* INTSEL1 */ +#define IRQPOS_SMC91CX (0 * 4) +#define IRQPOS_SM501 (1 * 4) +/* INTSEL2 */ +#define IRQPOS_EXTINT1 (0 * 4) +#define IRQPOS_EXTINT2 (1 * 4) +#define IRQPOS_EXTINT3 (2 * 4) +#define IRQPOS_EXTINT4 (3 * 4) +/* INTSEL3 */ +#define IRQPOS_PCCPW (0 * 4) + +/* IDE interrupt */ +#define IRQ_IDE0 67 /* iVDR */ + +/* SMC interrupt */ +#define SMC_IRQ 8 + +/* SM501 interrupt */ +#define SM501_IRQ 0 + +/* interrupt pin */ +#define IRQPIN_EXTINT1 0 /* IRQ0 pin */ +#define IRQPIN_EXTINT2 1 /* IRQ1 pin */ +#define IRQPIN_EXTINT3 2 /* IRQ2 pin */ +#define IRQPIN_SMC91CX 3 /* IRQ3 pin */ +#define IRQPIN_EXTINT4 4 /* IRQ4 pin */ +#define IRQPIN_PCC0 5 /* IRQ5 pin */ +#define IRQPIN_PCC2 6 /* IRQ6 pin */ +#define IRQPIN_SM501 7 /* IRQ7 pin */ +#define IRQPIN_PCCPW 7 /* IRQ7 pin */ + +/* arch/sh/boards/se/7780/irq.c */ +void init_se7780_IRQ(void); + +#define __IO_PREFIX se7780 +#include + +#endif /* __ASM_SH_SE7780_H */ diff --git a/arch/sh/include/asm/sections.h b/arch/sh/include/asm/sections.h new file mode 100644 index 00000000000..8f8f4ad400d --- /dev/null +++ b/arch/sh/include/asm/sections.h @@ -0,0 +1,11 @@ +#ifndef __ASM_SH_SECTIONS_H +#define __ASM_SH_SECTIONS_H + +#include + +extern long __machvec_start, __machvec_end; +extern char __uncached_start, __uncached_end; +extern char _ebss[]; + +#endif /* __ASM_SH_SECTIONS_H */ + diff --git a/arch/sh/include/asm/segment.h b/arch/sh/include/asm/segment.h new file mode 100644 index 00000000000..5e2725f4ac4 --- /dev/null +++ b/arch/sh/include/asm/segment.h @@ -0,0 +1,34 @@ +#ifndef __ASM_SH_SEGMENT_H +#define __ASM_SH_SEGMENT_H + +#ifndef __ASSEMBLY__ + +typedef struct { + unsigned long seg; +} mm_segment_t; + +#define MAKE_MM_SEG(s) ((mm_segment_t) { (s) }) + +/* + * The fs value determines whether argument validity checking should be + * performed or not. If get_fs() == USER_DS, checking is performed, with + * get_fs() == KERNEL_DS, checking is bypassed. + * + * For historical reasons, these macros are grossly misnamed. + */ +#define KERNEL_DS MAKE_MM_SEG(0xFFFFFFFFUL) +#ifdef CONFIG_MMU +#define USER_DS MAKE_MM_SEG(PAGE_OFFSET) +#else +#define USER_DS KERNEL_DS +#endif + +#define segment_eq(a,b) ((a).seg == (b).seg) + +#define get_ds() (KERNEL_DS) + +#define get_fs() (current_thread_info()->addr_limit) +#define set_fs(x) (current_thread_info()->addr_limit = (x)) + +#endif /* __ASSEMBLY__ */ +#endif /* __ASM_SH_SEGMENT_H */ diff --git a/arch/sh/include/asm/sembuf.h b/arch/sh/include/asm/sembuf.h new file mode 100644 index 00000000000..d79f3bd570b --- /dev/null +++ b/arch/sh/include/asm/sembuf.h @@ -0,0 +1,25 @@ +#ifndef __ASM_SH_SEMBUF_H +#define __ASM_SH_SEMBUF_H + +/* + * The semid64_ds structure for i386 architecture. + * Note extra padding because this structure is passed back and forth + * between kernel and user space. + * + * Pad space is left for: + * - 64-bit time_t to solve y2038 problem + * - 2 miscellaneous 32-bit values + */ + +struct semid64_ds { + struct ipc64_perm sem_perm; /* permissions .. see ipc.h */ + __kernel_time_t sem_otime; /* last semop time */ + unsigned long __unused1; + __kernel_time_t sem_ctime; /* last change time */ + unsigned long __unused2; + unsigned long sem_nsems; /* no. of semaphores in array */ + unsigned long __unused3; + unsigned long __unused4; +}; + +#endif /* __ASM_SH_SEMBUF_H */ diff --git a/arch/sh/include/asm/serial.h b/arch/sh/include/asm/serial.h new file mode 100644 index 00000000000..e13cc948ee6 --- /dev/null +++ b/arch/sh/include/asm/serial.h @@ -0,0 +1,36 @@ +/* + * include/asm-sh/serial.h + * + * Configuration details for 8250, 16450, 16550, etc. serial ports + */ + +#ifndef _ASM_SERIAL_H +#define _ASM_SERIAL_H + +#include + +/* + * This assumes you have a 1.8432 MHz clock for your UART. + * + * It'd be nice if someone built a serial card with a 24.576 MHz + * clock, since the 16550A is capable of handling a top speed of 1.5 + * megabits/second; but this requires the faster clock. + */ +#define BASE_BAUD ( 1843200 / 16 ) + +#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST) + +#ifdef CONFIG_HD64465 +#include + +#define SERIAL_PORT_DFNS \ + /* UART CLK PORT IRQ FLAGS */ \ + { 0, BASE_BAUD, 0x3F8, HD64465_IRQ_UART, STD_COM_FLAGS } /* ttyS0 */ + +#else + +#define SERIAL_PORT_DFNS + +#endif + +#endif /* _ASM_SERIAL_H */ diff --git a/arch/sh/include/asm/setup.h b/arch/sh/include/asm/setup.h new file mode 100644 index 00000000000..55a2bd328d9 --- /dev/null +++ b/arch/sh/include/asm/setup.h @@ -0,0 +1,27 @@ +#ifndef _SH_SETUP_H +#define _SH_SETUP_H + +#define COMMAND_LINE_SIZE 256 + +#ifdef __KERNEL__ + +/* + * This is set up by the setup-routine at boot-time + */ +#define PARAM ((unsigned char *)empty_zero_page) + +#define MOUNT_ROOT_RDONLY (*(unsigned long *) (PARAM+0x000)) +#define RAMDISK_FLAGS (*(unsigned long *) (PARAM+0x004)) +#define ORIG_ROOT_DEV (*(unsigned long *) (PARAM+0x008)) +#define LOADER_TYPE (*(unsigned long *) (PARAM+0x00c)) +#define INITRD_START (*(unsigned long *) (PARAM+0x010)) +#define INITRD_SIZE (*(unsigned long *) (PARAM+0x014)) +/* ... */ +#define COMMAND_LINE ((char *) (PARAM+0x100)) + +int setup_early_printk(char *); +void sh_mv_setup(void); + +#endif /* __KERNEL__ */ + +#endif /* _SH_SETUP_H */ diff --git a/arch/sh/include/asm/sfp-machine.h b/arch/sh/include/asm/sfp-machine.h new file mode 100644 index 00000000000..d3c548443f2 --- /dev/null +++ b/arch/sh/include/asm/sfp-machine.h @@ -0,0 +1,84 @@ +/* Machine-dependent software floating-point definitions. + SuperH kernel version. + Copyright (C) 1997,1998,1999 Free Software Foundation, Inc. + This file is part of the GNU C Library. + Contributed by Richard Henderson (rth@cygnus.com), + Jakub Jelinek (jj@ultra.linux.cz), + David S. Miller (davem@redhat.com) and + Peter Maydell (pmaydell@chiark.greenend.org.uk). + + The GNU C Library is free software; you can redistribute it and/or + modify it under the terms of the GNU Library General Public License as + published by the Free Software Foundation; either version 2 of the + License, or (at your option) any later version. + + The GNU C Library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Library General Public License for more details. + + You should have received a copy of the GNU Library General Public + License along with the GNU C Library; see the file COPYING.LIB. If + not, write to the Free Software Foundation, Inc., + 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +#ifndef _SFP_MACHINE_H +#define _SFP_MACHINE_H + +#define _FP_W_TYPE_SIZE 32 +#define _FP_W_TYPE unsigned long +#define _FP_WS_TYPE signed long +#define _FP_I_TYPE long + +#define _FP_MUL_MEAT_S(R,X,Y) \ + _FP_MUL_MEAT_1_wide(_FP_WFRACBITS_S,R,X,Y,umul_ppmm) +#define _FP_MUL_MEAT_D(R,X,Y) \ + _FP_MUL_MEAT_2_wide(_FP_WFRACBITS_D,R,X,Y,umul_ppmm) +#define _FP_MUL_MEAT_Q(R,X,Y) \ + _FP_MUL_MEAT_4_wide(_FP_WFRACBITS_Q,R,X,Y,umul_ppmm) + +#define _FP_DIV_MEAT_S(R,X,Y) _FP_DIV_MEAT_1_udiv(S,R,X,Y) +#define _FP_DIV_MEAT_D(R,X,Y) _FP_DIV_MEAT_2_udiv(D,R,X,Y) +#define _FP_DIV_MEAT_Q(R,X,Y) _FP_DIV_MEAT_4_udiv(Q,R,X,Y) + +#define _FP_NANFRAC_S ((_FP_QNANBIT_S << 1) - 1) +#define _FP_NANFRAC_D ((_FP_QNANBIT_D << 1) - 1), -1 +#define _FP_NANFRAC_Q ((_FP_QNANBIT_Q << 1) - 1), -1, -1, -1 +#define _FP_NANSIGN_S 0 +#define _FP_NANSIGN_D 0 +#define _FP_NANSIGN_Q 0 + +#define _FP_KEEPNANFRACP 1 + +/* + * If one NaN is signaling and the other is not, + * we choose that one, otherwise we choose X. + */ +#define _FP_CHOOSENAN(fs, wc, R, X, Y, OP) \ + do { \ + if ((_FP_FRAC_HIGH_RAW_##fs(X) & _FP_QNANBIT_##fs) \ + && !(_FP_FRAC_HIGH_RAW_##fs(Y) & _FP_QNANBIT_##fs)) \ + { \ + R##_s = Y##_s; \ + _FP_FRAC_COPY_##wc(R,Y); \ + } \ + else \ + { \ + R##_s = X##_s; \ + _FP_FRAC_COPY_##wc(R,X); \ + } \ + R##_c = FP_CLS_NAN; \ + } while (0) + +//#define FP_ROUNDMODE FPSCR_RM +#define FP_DENORM_ZERO 1/*FPSCR_DN*/ + +/* Exception flags. */ +#define FP_EX_INVALID (1<<4) +#define FP_EX_DIVZERO (1<<3) +#define FP_EX_OVERFLOW (1<<2) +#define FP_EX_UNDERFLOW (1<<1) +#define FP_EX_INEXACT (1<<0) + +#endif + diff --git a/arch/sh/include/asm/sh7760fb.h b/arch/sh/include/asm/sh7760fb.h new file mode 100644 index 00000000000..8767f61acec --- /dev/null +++ b/arch/sh/include/asm/sh7760fb.h @@ -0,0 +1,197 @@ +/* + * sh7760fb.h -- platform data for SH7760/SH7763 LCDC framebuffer driver. + * + * (c) 2006-2008 MSC Vertriebsges.m.b.H., + * Manuel Lauss + * (c) 2008 Nobuhiro Iwamatsu + */ + +#ifndef _ASM_SH_SH7760FB_H +#define _ASM_SH_SH7760FB_H + +/* + * some bits of the colormap registers should be written as zero. + * create a mask for that. + */ +#define SH7760FB_PALETTE_MASK 0x00f8fcf8 + +/* The LCDC dma engine always sets bits 27-26 to 1: this is Area3 */ +#define SH7760FB_DMA_MASK 0x0C000000 + +/* palette */ +#define LDPR(x) (((x) << 2)) + +/* framebuffer registers and bits */ +#define LDICKR 0x400 +#define LDMTR 0x402 +/* see sh7760fb.h for LDMTR bits */ +#define LDDFR 0x404 +#define LDDFR_PABD (1 << 8) +#define LDDFR_COLOR_MASK 0x7F +#define LDSMR 0x406 +#define LDSMR_ROT (1 << 13) +#define LDSARU 0x408 +#define LDSARL 0x40c +#define LDLAOR 0x410 +#define LDPALCR 0x412 +#define LDPALCR_PALS (1 << 4) +#define LDPALCR_PALEN (1 << 0) +#define LDHCNR 0x414 +#define LDHSYNR 0x416 +#define LDVDLNR 0x418 +#define LDVTLNR 0x41a +#define LDVSYNR 0x41c +#define LDACLNR 0x41e +#define LDINTR 0x420 +#define LDPMMR 0x424 +#define LDPSPR 0x426 +#define LDCNTR 0x428 +#define LDCNTR_DON (1 << 0) +#define LDCNTR_DON2 (1 << 4) + +#ifdef CONFIG_CPU_SUBTYPE_SH7763 +# define LDLIRNR 0x440 +/* LDINTR bit */ +# define LDINTR_MINTEN (1 << 15) +# define LDINTR_FINTEN (1 << 14) +# define LDINTR_VSINTEN (1 << 13) +# define LDINTR_VEINTEN (1 << 12) +# define LDINTR_MINTS (1 << 11) +# define LDINTR_FINTS (1 << 10) +# define LDINTR_VSINTS (1 << 9) +# define LDINTR_VEINTS (1 << 8) +# define VINT_START (LDINTR_VSINTEN) +# define VINT_CHECK (LDINTR_VSINTS) +#else +/* LDINTR bit */ +# define LDINTR_VINTSEL (1 << 12) +# define LDINTR_VINTE (1 << 8) +# define LDINTR_VINTS (1 << 0) +# define VINT_START (LDINTR_VINTSEL) +# define VINT_CHECK (LDINTR_VINTS) +#endif + +/* HSYNC polarity inversion */ +#define LDMTR_FLMPOL (1 << 15) + +/* VSYNC polarity inversion */ +#define LDMTR_CL1POL (1 << 14) + +/* DISPLAY-ENABLE polarity inversion */ +#define LDMTR_DISPEN_LOWACT (1 << 13) + +/* DISPLAY DATA BUS polarity inversion */ +#define LDMTR_DPOL_LOWACT (1 << 12) + +/* AC modulation signal enable */ +#define LDMTR_MCNT (1 << 10) + +/* Disable output of HSYNC during VSYNC period */ +#define LDMTR_CL1CNT (1 << 9) + +/* Disable output of VSYNC during VSYNC period */ +#define LDMTR_CL2CNT (1 << 8) + +/* Display types supported by the LCDC */ +#define LDMTR_STN_MONO_4 0x00 +#define LDMTR_STN_MONO_8 0x01 +#define LDMTR_STN_COLOR_4 0x08 +#define LDMTR_STN_COLOR_8 0x09 +#define LDMTR_STN_COLOR_12 0x0A +#define LDMTR_STN_COLOR_16 0x0B +#define LDMTR_DSTN_MONO_8 0x11 +#define LDMTR_DSTN_MONO_16 0x13 +#define LDMTR_DSTN_COLOR_8 0x19 +#define LDMTR_DSTN_COLOR_12 0x1A +#define LDMTR_DSTN_COLOR_16 0x1B +#define LDMTR_TFT_COLOR_16 0x2B + +/* framebuffer color layout */ +#define LDDFR_1BPP_MONO 0x00 +#define LDDFR_2BPP_MONO 0x01 +#define LDDFR_4BPP_MONO 0x02 +#define LDDFR_6BPP_MONO 0x04 +#define LDDFR_4BPP 0x0A +#define LDDFR_8BPP 0x0C +#define LDDFR_16BPP_RGB555 0x1D +#define LDDFR_16BPP_RGB565 0x2D + +/* LCDC Pixclock sources */ +#define LCDC_CLKSRC_BUSCLOCK 0 +#define LCDC_CLKSRC_PERIPHERAL 1 +#define LCDC_CLKSRC_EXTERNAL 2 + +#define LDICKR_CLKSRC(x) \ + (((x) & 3) << 12) + +/* LCDC pixclock input divider. Set to 1 at a minimum! */ +#define LDICKR_CLKDIV(x) \ + ((x) & 0x1f) + +struct sh7760fb_platdata { + + /* Set this member to a valid fb_videmode for the display you + * wish to use. The following members must be initialized: + * xres, yres, hsync_len, vsync_len, sync, + * {left,right,upper,lower}_margin. + * The driver uses the above members to calculate register values + * and memory requirements. Other members are ignored but may + * be used by other framebuffer layer components. + */ + struct fb_videomode *def_mode; + + /* LDMTR includes display type and signal polarity. The + * HSYNC/VSYNC polarities are derived from the fb_var_screeninfo + * data above; however the polarities of the following signals + * must be encoded in the ldmtr member: + * Display Enable signal (default high-active) DISPEN_LOWACT + * Display Data signals (default high-active) DPOL_LOWACT + * AC Modulation signal (default off) MCNT + * Hsync-During-Vsync suppression (default off) CL1CNT + * Vsync-during-vsync suppression (default off) CL2CNT + * NOTE: also set a display type! + * (one of LDMTR_{STN,DSTN,TFT}_{MONO,COLOR}_{4,8,12,16}) + */ + u16 ldmtr; + + /* LDDFR controls framebuffer image format (depth, organization) + * Use ONE of the LDDFR_?BPP_* macros! + */ + u16 lddfr; + + /* LDPMMR and LDPSPR control the timing of the power signals + * for the display. Please read the SH7760 Hardware Manual, + * Chapters 30.3.17, 30.3.18 and 30.4.6! + */ + u16 ldpmmr; + u16 ldpspr; + + /* LDACLNR contains the line numbers after which the AC modulation + * signal is to toggle. Set to ZERO for TFTs or displays which + * do not need it. (Chapter 30.3.15 in SH7760 Hardware Manual). + */ + u16 ldaclnr; + + /* LDICKR contains information on pixelclock source and config. + * Please use the LDICKR_CLKSRC() and LDICKR_CLKDIV() macros. + * minimal value for CLKDIV() must be 1!. + */ + u16 ldickr; + + /* set this member to 1 if you wish to use the LCDC's hardware + * rotation function. This is limited to displays <= 320x200 + * pixels resolution! + */ + int rotate; /* set to 1 to rotate 90 CCW */ + + /* set this to 1 to suppress vsync irq use. */ + int novsync; + + /* blanking hook for platform. Set this if your platform can do + * more than the LCDC in terms of blanking (e.g. disable clock + * generator / backlight power supply / etc. + */ + void (*blank) (int); +}; + +#endif /* _ASM_SH_SH7760FB_H */ diff --git a/arch/sh/include/asm/sh7763rdp.h b/arch/sh/include/asm/sh7763rdp.h new file mode 100644 index 00000000000..8750cc85297 --- /dev/null +++ b/arch/sh/include/asm/sh7763rdp.h @@ -0,0 +1,54 @@ +#ifndef __ASM_SH_SH7763RDP_H +#define __ASM_SH_SH7763RDP_H + +/* + * linux/include/asm-sh/sh7763drp.h + * + * Copyright (C) 2008 Renesas Solutions + * Copyright (C) 2008 Nobuhiro Iwamatsu + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + */ +#include + +/* clock control */ +#define MSTPCR1 0xFFC80038 + +/* PORT */ +#define PORT_PSEL0 0xFFEF0070 +#define PORT_PSEL1 0xFFEF0072 +#define PORT_PSEL2 0xFFEF0074 +#define PORT_PSEL3 0xFFEF0076 +#define PORT_PSEL4 0xFFEF0078 + +#define PORT_PACR 0xFFEF0000 +#define PORT_PCCR 0xFFEF0004 +#define PORT_PFCR 0xFFEF000A +#define PORT_PGCR 0xFFEF000C +#define PORT_PHCR 0xFFEF000E +#define PORT_PICR 0xFFEF0010 +#define PORT_PJCR 0xFFEF0012 +#define PORT_PKCR 0xFFEF0014 +#define PORT_PLCR 0xFFEF0016 +#define PORT_PMCR 0xFFEF0018 +#define PORT_PNCR 0xFFEF001A + +/* FPGA */ +#define CPLD_BOARD_ID_ERV_REG 0xB1000000 +#define CPLD_CPLD_CMD_REG 0xB1000006 + +/* + * USB SH7763RDP board can use Host only. + */ +#define USB_USBHSC 0xFFEC80f0 + +/* arch/sh/boards/renesas/sh7763rdp/irq.c */ +void init_sh7763rdp_IRQ(void); +int sh7763rdp_irq_demux(int irq); +#define __IO_PREFIX sh7763rdp +#include + +#endif /* __ASM_SH_SH7763RDP_H */ diff --git a/arch/sh/include/asm/sh7785lcr.h b/arch/sh/include/asm/sh7785lcr.h new file mode 100644 index 00000000000..1ce27d5c749 --- /dev/null +++ b/arch/sh/include/asm/sh7785lcr.h @@ -0,0 +1,55 @@ +#ifndef __ASM_SH_RENESAS_SH7785LCR_H +#define __ASM_SH_RENESAS_SH7785LCR_H + +/* + * This board has 2 physical memory maps. + * It can be changed with DIP switch(S2-5). + * + * phys address | S2-5 = OFF | S2-5 = ON + * -----------------------------+---------------+--------------- + * 0x00000000 - 0x03ffffff(CS0) | NOR Flash | NOR Flash + * 0x04000000 - 0x05ffffff(CS1) | PLD | PLD + * 0x06000000 - 0x07ffffff(CS1) | reserved | I2C + * 0x08000000 - 0x0bffffff(CS2) | USB | DDR SDRAM + * 0x0c000000 - 0x0fffffff(CS3) | SD | DDR SDRAM + * 0x10000000 - 0x13ffffff(CS4) | SM107 | SM107 + * 0x14000000 - 0x17ffffff(CS5) | I2C | USB + * 0x18000000 - 0x1bffffff(CS6) | reserved | SD + * 0x40000000 - 0x5fffffff | DDR SDRAM | (cannot use) + * + */ + +#define NOR_FLASH_ADDR 0x00000000 +#define NOR_FLASH_SIZE 0x04000000 + +#define PLD_BASE_ADDR 0x04000000 +#define PLD_PCICR (PLD_BASE_ADDR + 0x00) +#define PLD_LCD_BK_CONTR (PLD_BASE_ADDR + 0x02) +#define PLD_LOCALCR (PLD_BASE_ADDR + 0x04) +#define PLD_POFCR (PLD_BASE_ADDR + 0x06) +#define PLD_LEDCR (PLD_BASE_ADDR + 0x08) +#define PLD_SWSR (PLD_BASE_ADDR + 0x0a) +#define PLD_VERSR (PLD_BASE_ADDR + 0x0c) +#define PLD_MMSR (PLD_BASE_ADDR + 0x0e) + +#define SM107_MEM_ADDR 0x10000000 +#define SM107_MEM_SIZE 0x00e00000 +#define SM107_REG_ADDR 0x13e00000 +#define SM107_REG_SIZE 0x00200000 + +#if defined(CONFIG_SH_SH7785LCR_29BIT_PHYSMAPS) +#define R8A66597_ADDR 0x14000000 /* USB */ +#define CG200_ADDR 0x18000000 /* SD */ +#define PCA9564_ADDR 0x06000000 /* I2C */ +#else +#define R8A66597_ADDR 0x08000000 +#define CG200_ADDR 0x0c000000 +#define PCA9564_ADDR 0x14000000 +#endif + +#define R8A66597_SIZE 0x00000100 +#define CG200_SIZE 0x00010000 +#define PCA9564_SIZE 0x00000100 + +#endif /* __ASM_SH_RENESAS_SH7785LCR_H */ + diff --git a/arch/sh/include/asm/sh_bios.h b/arch/sh/include/asm/sh_bios.h new file mode 100644 index 00000000000..0ca261956e3 --- /dev/null +++ b/arch/sh/include/asm/sh_bios.h @@ -0,0 +1,19 @@ +#ifndef __ASM_SH_BIOS_H +#define __ASM_SH_BIOS_H + +/* + * Copyright (C) 2000 Greg Banks, Mitch Davis + * C API to interface to the standard LinuxSH BIOS + * usually from within the early stages of kernel boot. + */ + + +extern void sh_bios_console_write(const char *buf, unsigned int len); +extern void sh_bios_char_out(char ch); +extern int sh_bios_in_gdb_mode(void); +extern void sh_bios_gdb_detach(void); + +extern void sh_bios_get_node_addr(unsigned char *node_addr); +extern void sh_bios_shutdown(unsigned int how); + +#endif /* __ASM_SH_BIOS_H */ diff --git a/arch/sh/include/asm/sh_keysc.h b/arch/sh/include/asm/sh_keysc.h new file mode 100644 index 00000000000..b5a4dd5a972 --- /dev/null +++ b/arch/sh/include/asm/sh_keysc.h @@ -0,0 +1,13 @@ +#ifndef __ASM_KEYSC_H__ +#define __ASM_KEYSC_H__ + +#define SH_KEYSC_MAXKEYS 30 + +struct sh_keysc_info { + enum { SH_KEYSC_MODE_1, SH_KEYSC_MODE_2, SH_KEYSC_MODE_3 } mode; + int scan_timing; /* 0 -> 7, see KYCR1, SCN[2:0] */ + int delay; + int keycodes[SH_KEYSC_MAXKEYS]; +}; + +#endif /* __ASM_KEYSC_H__ */ diff --git a/arch/sh/include/asm/sh_mobile_lcdc.h b/arch/sh/include/asm/sh_mobile_lcdc.h new file mode 100644 index 00000000000..27677727df4 --- /dev/null +++ b/arch/sh/include/asm/sh_mobile_lcdc.h @@ -0,0 +1,66 @@ +#ifndef __ASM_SH_MOBILE_LCDC_H__ +#define __ASM_SH_MOBILE_LCDC_H__ + +#include + +enum { RGB8, /* 24bpp, 8:8:8 */ + RGB9, /* 18bpp, 9:9 */ + RGB12A, /* 24bpp, 12:12 */ + RGB12B, /* 12bpp */ + RGB16, /* 16bpp */ + RGB18, /* 18bpp */ + RGB24, /* 24bpp */ + SYS8A, /* 24bpp, 8:8:8 */ + SYS8B, /* 18bpp, 8:8:2 */ + SYS8C, /* 18bpp, 2:8:8 */ + SYS8D, /* 16bpp, 8:8 */ + SYS9, /* 18bpp, 9:9 */ + SYS12, /* 24bpp, 12:12 */ + SYS16A, /* 16bpp */ + SYS16B, /* 18bpp, 16:2 */ + SYS16C, /* 18bpp, 2:16 */ + SYS18, /* 18bpp */ + SYS24 };/* 24bpp */ + +enum { LCDC_CHAN_DISABLED = 0, + LCDC_CHAN_MAINLCD, + LCDC_CHAN_SUBLCD }; + +enum { LCDC_CLK_BUS, LCDC_CLK_PERIPHERAL, LCDC_CLK_EXTERNAL }; + +struct sh_mobile_lcdc_sys_bus_cfg { + unsigned long ldmt2r; + unsigned long ldmt3r; +}; + +struct sh_mobile_lcdc_sys_bus_ops { + void (*write_index)(void *handle, unsigned long data); + void (*write_data)(void *handle, unsigned long data); + unsigned long (*read_data)(void *handle); +}; + +struct sh_mobile_lcdc_board_cfg { + void *board_data; + int (*setup_sys)(void *board_data, void *sys_ops_handle, + struct sh_mobile_lcdc_sys_bus_ops *sys_ops); + void (*display_on)(void *board_data); + void (*display_off)(void *board_data); +}; + +struct sh_mobile_lcdc_chan_cfg { + int chan; + int bpp; + int interface_type; /* selects RGBn or SYSn I/F, see above */ + int clock_divider; + struct fb_videomode lcd_cfg; + struct sh_mobile_lcdc_board_cfg board_cfg; + struct sh_mobile_lcdc_sys_bus_cfg sys_bus_cfg; /* only for SYSn I/F */ +}; + +struct sh_mobile_lcdc_info { + unsigned long lddckr; + int clock_source; + struct sh_mobile_lcdc_chan_cfg ch[2]; +}; + +#endif /* __ASM_SH_MOBILE_LCDC_H__ */ diff --git a/arch/sh/include/asm/shmbuf.h b/arch/sh/include/asm/shmbuf.h new file mode 100644 index 00000000000..b2101f49052 --- /dev/null +++ b/arch/sh/include/asm/shmbuf.h @@ -0,0 +1,42 @@ +#ifndef __ASM_SH_SHMBUF_H +#define __ASM_SH_SHMBUF_H + +/* + * The shmid64_ds structure for i386 architecture. + * Note extra padding because this structure is passed back and forth + * between kernel and user space. + * + * Pad space is left for: + * - 64-bit time_t to solve y2038 problem + * - 2 miscellaneous 32-bit values + */ + +struct shmid64_ds { + struct ipc64_perm shm_perm; /* operation perms */ + size_t shm_segsz; /* size of segment (bytes) */ + __kernel_time_t shm_atime; /* last attach time */ + unsigned long __unused1; + __kernel_time_t shm_dtime; /* last detach time */ + unsigned long __unused2; + __kernel_time_t shm_ctime; /* last change time */ + unsigned long __unused3; + __kernel_pid_t shm_cpid; /* pid of creator */ + __kernel_pid_t shm_lpid; /* pid of last operator */ + unsigned long shm_nattch; /* no. of current attaches */ + unsigned long __unused4; + unsigned long __unused5; +}; + +struct shminfo64 { + unsigned long shmmax; + unsigned long shmmin; + unsigned long shmmni; + unsigned long shmseg; + unsigned long shmall; + unsigned long __unused1; + unsigned long __unused2; + unsigned long __unused3; + unsigned long __unused4; +}; + +#endif /* __ASM_SH_SHMBUF_H */ diff --git a/arch/sh/include/asm/shmin.h b/arch/sh/include/asm/shmin.h new file mode 100644 index 00000000000..36ba138a81f --- /dev/null +++ b/arch/sh/include/asm/shmin.h @@ -0,0 +1,9 @@ +#ifndef __ASM_SH_SHMIN_H +#define __ASM_SH_SHMIN_H + +#define SHMIN_IO_BASE 0xb0000000UL + +#define SHMIN_NE_IRQ IRQ2_IRQ +#define SHMIN_NE_BASE 0x300 + +#endif diff --git a/arch/sh/include/asm/shmparam.h b/arch/sh/include/asm/shmparam.h new file mode 100644 index 00000000000..ba1758d9010 --- /dev/null +++ b/arch/sh/include/asm/shmparam.h @@ -0,0 +1,22 @@ +/* + * include/asm-sh/shmparam.h + * + * Copyright (C) 1999 Niibe Yutaka + * Copyright (C) 2006 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#ifndef __ASM_SH_SHMPARAM_H +#define __ASM_SH_SHMPARAM_H + +/* + * SH-4 and SH-3 7705 have an aliasing dcache. Bump this up to a sensible value + * for everyone, and work out the specifics from the probed cache descriptor. + */ +#define SHMLBA 0x4000 /* attach addr a multiple of this */ + +#define __ARCH_FORCE_SHMLBA + +#endif /* __ASM_SH_SHMPARAM_H */ diff --git a/arch/sh/include/asm/sigcontext.h b/arch/sh/include/asm/sigcontext.h new file mode 100644 index 00000000000..8ce1435bc0b --- /dev/null +++ b/arch/sh/include/asm/sigcontext.h @@ -0,0 +1,40 @@ +#ifndef __ASM_SH_SIGCONTEXT_H +#define __ASM_SH_SIGCONTEXT_H + +struct sigcontext { + unsigned long oldmask; + +#if defined(__SH5__) || defined(CONFIG_CPU_SH5) + /* CPU registers */ + unsigned long long sc_regs[63]; + unsigned long long sc_tregs[8]; + unsigned long long sc_pc; + unsigned long long sc_sr; + + /* FPU registers */ + unsigned long long sc_fpregs[32]; + unsigned int sc_fpscr; + unsigned int sc_fpvalid; +#else + /* CPU registers */ + unsigned long sc_regs[16]; + unsigned long sc_pc; + unsigned long sc_pr; + unsigned long sc_sr; + unsigned long sc_gbr; + unsigned long sc_mach; + unsigned long sc_macl; + +#if defined(__SH4__) || defined(CONFIG_CPU_SH4) || \ + defined(__SH2A__) || defined(CONFIG_CPU_SH2A) + /* FPU registers */ + unsigned long sc_fpregs[16]; + unsigned long sc_xfpregs[16]; + unsigned int sc_fpscr; + unsigned int sc_fpul; + unsigned int sc_ownedfp; +#endif +#endif +}; + +#endif /* __ASM_SH_SIGCONTEXT_H */ diff --git a/arch/sh/include/asm/siginfo.h b/arch/sh/include/asm/siginfo.h new file mode 100644 index 00000000000..813040ed68a --- /dev/null +++ b/arch/sh/include/asm/siginfo.h @@ -0,0 +1,6 @@ +#ifndef __ASM_SH_SIGINFO_H +#define __ASM_SH_SIGINFO_H + +#include + +#endif /* __ASM_SH_SIGINFO_H */ diff --git a/arch/sh/include/asm/signal.h b/arch/sh/include/asm/signal.h new file mode 100644 index 00000000000..5c5c1e85208 --- /dev/null +++ b/arch/sh/include/asm/signal.h @@ -0,0 +1,160 @@ +#ifndef __ASM_SH_SIGNAL_H +#define __ASM_SH_SIGNAL_H + +#include + +/* Avoid too many header ordering problems. */ +struct pt_regs; +struct siginfo; + +#ifdef __KERNEL__ +/* Most things should be clean enough to redefine this at will, if care + is taken to make libc match. */ + +#define _NSIG 64 +#define _NSIG_BPW 32 +#define _NSIG_WORDS (_NSIG / _NSIG_BPW) + +typedef unsigned long old_sigset_t; /* at least 32 bits */ + +typedef struct { + unsigned long sig[_NSIG_WORDS]; +} sigset_t; + +#else +/* Here we must cater to libcs that poke about in kernel headers. */ + +#define NSIG 32 +typedef unsigned long sigset_t; + +#endif /* __KERNEL__ */ + +#define SIGHUP 1 +#define SIGINT 2 +#define SIGQUIT 3 +#define SIGILL 4 +#define SIGTRAP 5 +#define SIGABRT 6 +#define SIGIOT 6 +#define SIGBUS 7 +#define SIGFPE 8 +#define SIGKILL 9 +#define SIGUSR1 10 +#define SIGSEGV 11 +#define SIGUSR2 12 +#define SIGPIPE 13 +#define SIGALRM 14 +#define SIGTERM 15 +#define SIGSTKFLT 16 +#define SIGCHLD 17 +#define SIGCONT 18 +#define SIGSTOP 19 +#define SIGTSTP 20 +#define SIGTTIN 21 +#define SIGTTOU 22 +#define SIGURG 23 +#define SIGXCPU 24 +#define SIGXFSZ 25 +#define SIGVTALRM 26 +#define SIGPROF 27 +#define SIGWINCH 28 +#define SIGIO 29 +#define SIGPOLL SIGIO +/* +#define SIGLOST 29 +*/ +#define SIGPWR 30 +#define SIGSYS 31 +#define SIGUNUSED 31 + +/* These should not be considered constants from userland. */ +#define SIGRTMIN 32 +#define SIGRTMAX _NSIG + +/* + * SA_FLAGS values: + * + * SA_ONSTACK indicates that a registered stack_t will be used. + * SA_RESTART flag to get restarting signals (which were the default long ago) + * SA_NOCLDSTOP flag to turn off SIGCHLD when children stop. + * SA_RESETHAND clears the handler when the signal is delivered. + * SA_NOCLDWAIT flag on SIGCHLD to inhibit zombies. + * SA_NODEFER prevents the current signal from being masked in the handler. + * + * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single + * Unix names RESETHAND and NODEFER respectively. + */ +#define SA_NOCLDSTOP 0x00000001 +#define SA_NOCLDWAIT 0x00000002 +#define SA_SIGINFO 0x00000004 +#define SA_ONSTACK 0x08000000 +#define SA_RESTART 0x10000000 +#define SA_NODEFER 0x40000000 +#define SA_RESETHAND 0x80000000 + +#define SA_NOMASK SA_NODEFER +#define SA_ONESHOT SA_RESETHAND + +#define SA_RESTORER 0x04000000 + +/* + * sigaltstack controls + */ +#define SS_ONSTACK 1 +#define SS_DISABLE 2 + +#define MINSIGSTKSZ 2048 +#define SIGSTKSZ 8192 + +#include + +#ifdef __KERNEL__ +struct old_sigaction { + __sighandler_t sa_handler; + old_sigset_t sa_mask; + unsigned long sa_flags; + void (*sa_restorer)(void); +}; + +struct sigaction { + __sighandler_t sa_handler; + unsigned long sa_flags; + void (*sa_restorer)(void); + sigset_t sa_mask; /* mask last for extensibility */ +}; + +struct k_sigaction { + struct sigaction sa; +}; +#else +/* Here we must cater to libcs that poke about in kernel headers. */ + +struct sigaction { + union { + __sighandler_t _sa_handler; + void (*_sa_sigaction)(int, struct siginfo *, void *); + } _u; + sigset_t sa_mask; + unsigned long sa_flags; + void (*sa_restorer)(void); +}; + +#define sa_handler _u._sa_handler +#define sa_sigaction _u._sa_sigaction + +#endif /* __KERNEL__ */ + +typedef struct sigaltstack { + void *ss_sp; + int ss_flags; + size_t ss_size; +} stack_t; + +#ifdef __KERNEL__ +#include + +#define ptrace_signal_deliver(regs, cookie) do { } while (0) + +#endif /* __KERNEL__ */ + +#endif /* __ASM_SH_SIGNAL_H */ diff --git a/arch/sh/include/asm/smc37c93x.h b/arch/sh/include/asm/smc37c93x.h new file mode 100644 index 00000000000..585da2a8fc4 --- /dev/null +++ b/arch/sh/include/asm/smc37c93x.h @@ -0,0 +1,190 @@ +#ifndef __ASM_SH_SMC37C93X_H +#define __ASM_SH_SMC37C93X_H + +/* + * linux/include/asm-sh/smc37c93x.h + * + * Copyright (C) 2000 Kazumoto Kojima + * + * SMSC 37C93x Super IO Chip support + */ + +/* Default base I/O address */ +#define FDC_PRIMARY_BASE 0x3f0 +#define IDE1_PRIMARY_BASE 0x1f0 +#define IDE1_SECONDARY_BASE 0x170 +#define PARPORT_PRIMARY_BASE 0x378 +#define COM1_PRIMARY_BASE 0x2f8 +#define COM2_PRIMARY_BASE 0x3f8 +#define RTC_PRIMARY_BASE 0x070 +#define KBC_PRIMARY_BASE 0x060 +#define AUXIO_PRIMARY_BASE 0x000 /* XXX */ + +/* Logical device number */ +#define LDN_FDC 0 +#define LDN_IDE1 1 +#define LDN_IDE2 2 +#define LDN_PARPORT 3 +#define LDN_COM1 4 +#define LDN_COM2 5 +#define LDN_RTC 6 +#define LDN_KBC 7 +#define LDN_AUXIO 8 + +/* Configuration port and key */ +#define CONFIG_PORT 0x3f0 +#define INDEX_PORT CONFIG_PORT +#define DATA_PORT 0x3f1 +#define CONFIG_ENTER 0x55 +#define CONFIG_EXIT 0xaa + +/* Configuration index */ +#define CURRENT_LDN_INDEX 0x07 +#define POWER_CONTROL_INDEX 0x22 +#define ACTIVATE_INDEX 0x30 +#define IO_BASE_HI_INDEX 0x60 +#define IO_BASE_LO_INDEX 0x61 +#define IRQ_SELECT_INDEX 0x70 +#define DMA_SELECT_INDEX 0x74 + +#define GPIO46_INDEX 0xc6 +#define GPIO47_INDEX 0xc7 + +/* UART stuff. Only for debugging. */ +/* UART Register */ + +#define UART_RBR 0x0 /* Receiver Buffer Register (Read Only) */ +#define UART_THR 0x0 /* Transmitter Holding Register (Write Only) */ +#define UART_IER 0x2 /* Interrupt Enable Register */ +#define UART_IIR 0x4 /* Interrupt Ident Register (Read Only) */ +#define UART_FCR 0x4 /* FIFO Control Register (Write Only) */ +#define UART_LCR 0x6 /* Line Control Register */ +#define UART_MCR 0x8 /* MODEM Control Register */ +#define UART_LSR 0xa /* Line Status Register */ +#define UART_MSR 0xc /* MODEM Status Register */ +#define UART_SCR 0xe /* Scratch Register */ +#define UART_DLL 0x0 /* Divisor Latch (LS) */ +#define UART_DLM 0x2 /* Divisor Latch (MS) */ + +#ifndef __ASSEMBLY__ +typedef struct uart_reg { + volatile __u16 rbr; + volatile __u16 ier; + volatile __u16 iir; + volatile __u16 lcr; + volatile __u16 mcr; + volatile __u16 lsr; + volatile __u16 msr; + volatile __u16 scr; +} uart_reg; +#endif /* ! __ASSEMBLY__ */ + +/* Alias for Write Only Register */ + +#define thr rbr +#define tcr iir + +/* Alias for Divisor Latch Register */ + +#define dll rbr +#define dlm ier +#define fcr iir + +/* Interrupt Enable Register */ + +#define IER_ERDAI 0x0100 /* Enable Received Data Available Interrupt */ +#define IER_ETHREI 0x0200 /* Enable Transmitter Holding Register Empty Interrupt */ +#define IER_ELSI 0x0400 /* Enable Receiver Line Status Interrupt */ +#define IER_EMSI 0x0800 /* Enable MODEM Status Interrupt */ + +/* Interrupt Ident Register */ + +#define IIR_IP 0x0100 /* "0" if Interrupt Pending */ +#define IIR_IIB0 0x0200 /* Interrupt ID Bit 0 */ +#define IIR_IIB1 0x0400 /* Interrupt ID Bit 1 */ +#define IIR_IIB2 0x0800 /* Interrupt ID Bit 2 */ +#define IIR_FIFO 0xc000 /* FIFOs enabled */ + +/* FIFO Control Register */ + +#define FCR_FEN 0x0100 /* FIFO enable */ +#define FCR_RFRES 0x0200 /* Receiver FIFO reset */ +#define FCR_TFRES 0x0400 /* Transmitter FIFO reset */ +#define FCR_DMA 0x0800 /* DMA mode select */ +#define FCR_RTL 0x4000 /* Receiver triger (LSB) */ +#define FCR_RTM 0x8000 /* Receiver triger (MSB) */ + +/* Line Control Register */ + +#define LCR_WLS0 0x0100 /* Word Length Select Bit 0 */ +#define LCR_WLS1 0x0200 /* Word Length Select Bit 1 */ +#define LCR_STB 0x0400 /* Number of Stop Bits */ +#define LCR_PEN 0x0800 /* Parity Enable */ +#define LCR_EPS 0x1000 /* Even Parity Select */ +#define LCR_SP 0x2000 /* Stick Parity */ +#define LCR_SB 0x4000 /* Set Break */ +#define LCR_DLAB 0x8000 /* Divisor Latch Access Bit */ + +/* MODEM Control Register */ + +#define MCR_DTR 0x0100 /* Data Terminal Ready */ +#define MCR_RTS 0x0200 /* Request to Send */ +#define MCR_OUT1 0x0400 /* Out 1 */ +#define MCR_IRQEN 0x0800 /* IRQ Enable */ +#define MCR_LOOP 0x1000 /* Loop */ + +/* Line Status Register */ + +#define LSR_DR 0x0100 /* Data Ready */ +#define LSR_OE 0x0200 /* Overrun Error */ +#define LSR_PE 0x0400 /* Parity Error */ +#define LSR_FE 0x0800 /* Framing Error */ +#define LSR_BI 0x1000 /* Break Interrupt */ +#define LSR_THRE 0x2000 /* Transmitter Holding Register Empty */ +#define LSR_TEMT 0x4000 /* Transmitter Empty */ +#define LSR_FIFOE 0x8000 /* Receiver FIFO error */ + +/* MODEM Status Register */ + +#define MSR_DCTS 0x0100 /* Delta Clear to Send */ +#define MSR_DDSR 0x0200 /* Delta Data Set Ready */ +#define MSR_TERI 0x0400 /* Trailing Edge Ring Indicator */ +#define MSR_DDCD 0x0800 /* Delta Data Carrier Detect */ +#define MSR_CTS 0x1000 /* Clear to Send */ +#define MSR_DSR 0x2000 /* Data Set Ready */ +#define MSR_RI 0x4000 /* Ring Indicator */ +#define MSR_DCD 0x8000 /* Data Carrier Detect */ + +/* Baud Rate Divisor */ + +#define UART_CLK (1843200) /* 1.8432 MHz */ +#define UART_BAUD(x) (UART_CLK / (16 * (x))) + +/* RTC register definition */ +#define RTC_SECONDS 0 +#define RTC_SECONDS_ALARM 1 +#define RTC_MINUTES 2 +#define RTC_MINUTES_ALARM 3 +#define RTC_HOURS 4 +#define RTC_HOURS_ALARM 5 +#define RTC_DAY_OF_WEEK 6 +#define RTC_DAY_OF_MONTH 7 +#define RTC_MONTH 8 +#define RTC_YEAR 9 +#define RTC_FREQ_SELECT 10 +# define RTC_UIP 0x80 +# define RTC_DIV_CTL 0x70 +/* This RTC can work under 32.768KHz clock only. */ +# define RTC_OSC_ENABLE 0x20 +# define RTC_OSC_DISABLE 0x00 +#define RTC_CONTROL 11 +# define RTC_SET 0x80 +# define RTC_PIE 0x40 +# define RTC_AIE 0x20 +# define RTC_UIE 0x10 +# define RTC_SQWE 0x08 +# define RTC_DM_BINARY 0x04 +# define RTC_24H 0x02 +# define RTC_DST_EN 0x01 + +#endif /* __ASM_SH_SMC37C93X_H */ diff --git a/arch/sh/include/asm/smp.h b/arch/sh/include/asm/smp.h new file mode 100644 index 00000000000..593343cd26e --- /dev/null +++ b/arch/sh/include/asm/smp.h @@ -0,0 +1,50 @@ +#ifndef __ASM_SH_SMP_H +#define __ASM_SH_SMP_H + +#include +#include + +#ifdef CONFIG_SMP + +#include +#include +#include + +#define raw_smp_processor_id() (current_thread_info()->cpu) +#define hard_smp_processor_id() plat_smp_processor_id() + +/* Map from cpu id to sequential logical cpu number. */ +extern int __cpu_number_map[NR_CPUS]; +#define cpu_number_map(cpu) __cpu_number_map[cpu] + +/* The reverse map from sequential logical cpu number to cpu id. */ +extern int __cpu_logical_map[NR_CPUS]; +#define cpu_logical_map(cpu) __cpu_logical_map[cpu] + +/* I've no idea what the real meaning of this is */ +#define PROC_CHANGE_PENALTY 20 + +#define NO_PROC_ID (-1) + +#define SMP_MSG_FUNCTION 0 +#define SMP_MSG_RESCHEDULE 1 +#define SMP_MSG_FUNCTION_SINGLE 2 +#define SMP_MSG_NR 3 + +void plat_smp_setup(void); +void plat_prepare_cpus(unsigned int max_cpus); +int plat_smp_processor_id(void); +void plat_start_cpu(unsigned int cpu, unsigned long entry_point); +void plat_send_ipi(unsigned int cpu, unsigned int message); +int plat_register_ipi_handler(unsigned int message, + void (*handler)(void *), void *arg); +extern void arch_send_call_function_single_ipi(int cpu); +extern void arch_send_call_function_ipi(cpumask_t mask); + +#else + +#define hard_smp_processor_id() (0) + +#endif /* CONFIG_SMP */ + +#endif /* __ASM_SH_SMP_H */ diff --git a/arch/sh/include/asm/snapgear.h b/arch/sh/include/asm/snapgear.h new file mode 100644 index 00000000000..042d95f51c4 --- /dev/null +++ b/arch/sh/include/asm/snapgear.h @@ -0,0 +1,71 @@ +/* + * include/asm-sh/snapgear.h + * + * Modified version of io_se.h for the snapgear-specific functions. + * + * May be copied or modified under the terms of the GNU General Public + * License. See linux/COPYING for more information. + * + * IO functions for a SnapGear + */ + +#ifndef _ASM_SH_IO_SNAPGEAR_H +#define _ASM_SH_IO_SNAPGEAR_H + +#if defined(CONFIG_CPU_SH4) +/* + * The external interrupt lines, these take up ints 0 - 15 inclusive + * depending on the priority for the interrupt. In fact the priority + * is the interrupt :-) + */ + +#define IRL0_IRQ 2 +#define IRL0_PRIORITY 13 + +#define IRL1_IRQ 5 +#define IRL1_PRIORITY 10 + +#define IRL2_IRQ 8 +#define IRL2_PRIORITY 7 + +#define IRL3_IRQ 11 +#define IRL3_PRIORITY 4 +#endif + +#define __IO_PREFIX snapgear +#include + +#ifdef CONFIG_SH_SECUREEDGE5410 +/* + * We need to remember what was written to the ioport as some bits + * are shared with other functions and you cannot read back what was + * written :-| + * + * Bit Read Write + * ----------------------------------------------- + * D0 DCD on ttySC1 power + * D1 Reset Switch heatbeat + * D2 ttySC0 CTS (7100) LAN + * D3 - WAN + * D4 ttySC0 DCD (7100) CONSOLE + * D5 - ONLINE + * D6 - VPN + * D7 - DTR on ttySC1 + * D8 - ttySC0 RTS (7100) + * D9 - ttySC0 DTR (7100) + * D10 - RTC SCLK + * D11 RTC DATA RTC DATA + * D12 - RTS RESET + */ + +#define SECUREEDGE_IOPORT_ADDR ((volatile short *) 0xb0000000) +extern unsigned short secureedge5410_ioport; + +#define SECUREEDGE_WRITE_IOPORT(val, mask) (*SECUREEDGE_IOPORT_ADDR = \ + (secureedge5410_ioport = \ + ((secureedge5410_ioport & ~(mask)) | ((val) & (mask))))) +#define SECUREEDGE_READ_IOPORT() \ + ((*SECUREEDGE_IOPORT_ADDR&0x0817) | (secureedge5410_ioport&~0x0817)) +#endif + +#endif /* _ASM_SH_IO_SNAPGEAR_H */ diff --git a/arch/sh/include/asm/socket.h b/arch/sh/include/asm/socket.h new file mode 100644 index 00000000000..6d4bf651295 --- /dev/null +++ b/arch/sh/include/asm/socket.h @@ -0,0 +1,57 @@ +#ifndef __ASM_SH_SOCKET_H +#define __ASM_SH_SOCKET_H + +#include + +/* For setsockopt(2) */ +#define SOL_SOCKET 1 + +#define SO_DEBUG 1 +#define SO_REUSEADDR 2 +#define SO_TYPE 3 +#define SO_ERROR 4 +#define SO_DONTROUTE 5 +#define SO_BROADCAST 6 +#define SO_SNDBUF 7 +#define SO_RCVBUF 8 +#define SO_RCVBUFFORCE 32 +#define SO_SNDBUFFORCE 33 +#define SO_KEEPALIVE 9 +#define SO_OOBINLINE 10 +#define SO_NO_CHECK 11 +#define SO_PRIORITY 12 +#define SO_LINGER 13 +#define SO_BSDCOMPAT 14 +/* To add :#define SO_REUSEPORT 15 */ +#define SO_PASSCRED 16 +#define SO_PEERCRED 17 +#define SO_RCVLOWAT 18 +#define SO_SNDLOWAT 19 +#define SO_RCVTIMEO 20 +#define SO_SNDTIMEO 21 + +/* Security levels - as per NRL IPv6 - don't actually do anything */ +#define SO_SECURITY_AUTHENTICATION 22 +#define SO_SECURITY_ENCRYPTION_TRANSPORT 23 +#define SO_SECURITY_ENCRYPTION_NETWORK 24 + +#define SO_BINDTODEVICE 25 + +/* Socket filtering */ +#define SO_ATTACH_FILTER 26 +#define SO_DETACH_FILTER 27 + +#define SO_PEERNAME 28 +#define SO_TIMESTAMP 29 +#define SCM_TIMESTAMP SO_TIMESTAMP + +#define SO_ACCEPTCONN 30 + +#define SO_PEERSEC 31 +#define SO_PASSSEC 34 +#define SO_TIMESTAMPNS 35 +#define SCM_TIMESTAMPNS SO_TIMESTAMPNS + +#define SO_MARK 36 + +#endif /* __ASM_SH_SOCKET_H */ diff --git a/arch/sh/include/asm/sockios.h b/arch/sh/include/asm/sockios.h new file mode 100644 index 00000000000..cf8b96b1f9a --- /dev/null +++ b/arch/sh/include/asm/sockios.h @@ -0,0 +1,14 @@ +#ifndef __ASM_SH_SOCKIOS_H +#define __ASM_SH_SOCKIOS_H + +/* Socket-level I/O control calls. */ +#define FIOGETOWN _IOR('f', 123, int) +#define FIOSETOWN _IOW('f', 124, int) + +#define SIOCATMARK _IOR('s', 7, int) +#define SIOCSPGRP _IOW('s', 8, pid_t) +#define SIOCGPGRP _IOR('s', 9, pid_t) + +#define SIOCGSTAMP _IOR('s', 100, struct timeval) /* Get stamp (timeval) */ +#define SIOCGSTAMPNS _IOR('s', 101, struct timespec) /* Get stamp (timespec) */ +#endif /* __ASM_SH_SOCKIOS_H */ diff --git a/arch/sh/include/asm/sparsemem.h b/arch/sh/include/asm/sparsemem.h new file mode 100644 index 00000000000..547a540b666 --- /dev/null +++ b/arch/sh/include/asm/sparsemem.h @@ -0,0 +1,16 @@ +#ifndef __ASM_SH_SPARSEMEM_H +#define __ASM_SH_SPARSEMEM_H + +#ifdef __KERNEL__ +/* + * SECTION_SIZE_BITS 2^N: how big each section will be + * MAX_PHYSADDR_BITS 2^N: how much physical address space we have + * MAX_PHYSMEM_BITS 2^N: how much memory we can have in that space + */ +#define SECTION_SIZE_BITS 26 +#define MAX_PHYSADDR_BITS 32 +#define MAX_PHYSMEM_BITS 32 + +#endif + +#endif /* __ASM_SH_SPARSEMEM_H */ diff --git a/arch/sh/include/asm/spi.h b/arch/sh/include/asm/spi.h new file mode 100644 index 00000000000..e96f5b0953c --- /dev/null +++ b/arch/sh/include/asm/spi.h @@ -0,0 +1,13 @@ +#ifndef __ASM_SPI_H__ +#define __ASM_SPI_H__ + +struct sh_spi_info; + +struct sh_spi_info { + int bus_num; + int num_chipselect; + + void (*chip_select)(struct sh_spi_info *spi, int cs, int state); +}; + +#endif /* __ASM_SPI_H__ */ diff --git a/arch/sh/include/asm/spinlock.h b/arch/sh/include/asm/spinlock.h new file mode 100644 index 00000000000..e793181d64d --- /dev/null +++ b/arch/sh/include/asm/spinlock.h @@ -0,0 +1,223 @@ +/* + * include/asm-sh/spinlock.h + * + * Copyright (C) 2002, 2003 Paul Mundt + * Copyright (C) 2006, 2007 Akio Idehara + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#ifndef __ASM_SH_SPINLOCK_H +#define __ASM_SH_SPINLOCK_H + +/* + * The only locking implemented here uses SH-4A opcodes. For others, + * split this out as per atomic-*.h. + */ +#ifndef CONFIG_CPU_SH4A +#error "Need movli.l/movco.l for spinlocks" +#endif + +/* + * Your basic SMP spinlocks, allowing only a single CPU anywhere + */ + +#define __raw_spin_is_locked(x) ((x)->lock <= 0) +#define __raw_spin_lock_flags(lock, flags) __raw_spin_lock(lock) +#define __raw_spin_unlock_wait(x) \ + do { cpu_relax(); } while ((x)->lock) + +/* + * Simple spin lock operations. There are two variants, one clears IRQ's + * on the local processor, one does not. + * + * We make no fairness assumptions. They have a cost. + */ +static inline void __raw_spin_lock(raw_spinlock_t *lock) +{ + unsigned long tmp; + unsigned long oldval; + + __asm__ __volatile__ ( + "1: \n\t" + "movli.l @%2, %0 ! __raw_spin_lock \n\t" + "mov %0, %1 \n\t" + "mov #0, %0 \n\t" + "movco.l %0, @%2 \n\t" + "bf 1b \n\t" + "cmp/pl %1 \n\t" + "bf 1b \n\t" + : "=&z" (tmp), "=&r" (oldval) + : "r" (&lock->lock) + : "t", "memory" + ); +} + +static inline void __raw_spin_unlock(raw_spinlock_t *lock) +{ + unsigned long tmp; + + __asm__ __volatile__ ( + "mov #1, %0 ! __raw_spin_unlock \n\t" + "mov.l %0, @%1 \n\t" + : "=&z" (tmp) + : "r" (&lock->lock) + : "t", "memory" + ); +} + +static inline int __raw_spin_trylock(raw_spinlock_t *lock) +{ + unsigned long tmp, oldval; + + __asm__ __volatile__ ( + "1: \n\t" + "movli.l @%2, %0 ! __raw_spin_trylock \n\t" + "mov %0, %1 \n\t" + "mov #0, %0 \n\t" + "movco.l %0, @%2 \n\t" + "bf 1b \n\t" + "synco \n\t" + : "=&z" (tmp), "=&r" (oldval) + : "r" (&lock->lock) + : "t", "memory" + ); + + return oldval; +} + +/* + * Read-write spinlocks, allowing multiple readers but only one writer. + * + * NOTE! it is quite common to have readers in interrupts but no interrupt + * writers. For those circumstances we can "mix" irq-safe locks - any writer + * needs to get a irq-safe write-lock, but readers can get non-irqsafe + * read-locks. + */ + +/** + * read_can_lock - would read_trylock() succeed? + * @lock: the rwlock in question. + */ +#define __raw_read_can_lock(x) ((x)->lock > 0) + +/** + * write_can_lock - would write_trylock() succeed? + * @lock: the rwlock in question. + */ +#define __raw_write_can_lock(x) ((x)->lock == RW_LOCK_BIAS) + +static inline void __raw_read_lock(raw_rwlock_t *rw) +{ + unsigned long tmp; + + __asm__ __volatile__ ( + "1: \n\t" + "movli.l @%1, %0 ! __raw_read_lock \n\t" + "cmp/pl %0 \n\t" + "bf 1b \n\t" + "add #-1, %0 \n\t" + "movco.l %0, @%1 \n\t" + "bf 1b \n\t" + : "=&z" (tmp) + : "r" (&rw->lock) + : "t", "memory" + ); +} + +static inline void __raw_read_unlock(raw_rwlock_t *rw) +{ + unsigned long tmp; + + __asm__ __volatile__ ( + "1: \n\t" + "movli.l @%1, %0 ! __raw_read_unlock \n\t" + "add #1, %0 \n\t" + "movco.l %0, @%1 \n\t" + "bf 1b \n\t" + : "=&z" (tmp) + : "r" (&rw->lock) + : "t", "memory" + ); +} + +static inline void __raw_write_lock(raw_rwlock_t *rw) +{ + unsigned long tmp; + + __asm__ __volatile__ ( + "1: \n\t" + "movli.l @%1, %0 ! __raw_write_lock \n\t" + "cmp/hs %2, %0 \n\t" + "bf 1b \n\t" + "sub %2, %0 \n\t" + "movco.l %0, @%1 \n\t" + "bf 1b \n\t" + : "=&z" (tmp) + : "r" (&rw->lock), "r" (RW_LOCK_BIAS) + : "t", "memory" + ); +} + +static inline void __raw_write_unlock(raw_rwlock_t *rw) +{ + __asm__ __volatile__ ( + "mov.l %1, @%0 ! __raw_write_unlock \n\t" + : + : "r" (&rw->lock), "r" (RW_LOCK_BIAS) + : "t", "memory" + ); +} + +static inline int __raw_read_trylock(raw_rwlock_t *rw) +{ + unsigned long tmp, oldval; + + __asm__ __volatile__ ( + "1: \n\t" + "movli.l @%2, %0 ! __raw_read_trylock \n\t" + "mov %0, %1 \n\t" + "cmp/pl %0 \n\t" + "bf 2f \n\t" + "add #-1, %0 \n\t" + "movco.l %0, @%2 \n\t" + "bf 1b \n\t" + "2: \n\t" + "synco \n\t" + : "=&z" (tmp), "=&r" (oldval) + : "r" (&rw->lock) + : "t", "memory" + ); + + return (oldval > 0); +} + +static inline int __raw_write_trylock(raw_rwlock_t *rw) +{ + unsigned long tmp, oldval; + + __asm__ __volatile__ ( + "1: \n\t" + "movli.l @%2, %0 ! __raw_write_trylock \n\t" + "mov %0, %1 \n\t" + "cmp/hs %3, %0 \n\t" + "bf 2f \n\t" + "sub %3, %0 \n\t" + "2: \n\t" + "movco.l %0, @%2 \n\t" + "bf 1b \n\t" + "synco \n\t" + : "=&z" (tmp), "=&r" (oldval) + : "r" (&rw->lock), "r" (RW_LOCK_BIAS) + : "t", "memory" + ); + + return (oldval > (RW_LOCK_BIAS - 1)); +} + +#define _raw_spin_relax(lock) cpu_relax() +#define _raw_read_relax(lock) cpu_relax() +#define _raw_write_relax(lock) cpu_relax() + +#endif /* __ASM_SH_SPINLOCK_H */ diff --git a/arch/sh/include/asm/spinlock_types.h b/arch/sh/include/asm/spinlock_types.h new file mode 100644 index 00000000000..b4d244e7b60 --- /dev/null +++ b/arch/sh/include/asm/spinlock_types.h @@ -0,0 +1,21 @@ +#ifndef __ASM_SH_SPINLOCK_TYPES_H +#define __ASM_SH_SPINLOCK_TYPES_H + +#ifndef __LINUX_SPINLOCK_TYPES_H +# error "please don't include this file directly" +#endif + +typedef struct { + volatile unsigned int lock; +} raw_spinlock_t; + +#define __RAW_SPIN_LOCK_UNLOCKED { 1 } + +typedef struct { + volatile unsigned int lock; +} raw_rwlock_t; + +#define RW_LOCK_BIAS 0x01000000 +#define __RAW_RW_LOCK_UNLOCKED { RW_LOCK_BIAS } + +#endif diff --git a/arch/sh/include/asm/stat.h b/arch/sh/include/asm/stat.h new file mode 100644 index 00000000000..e1810cc6e3d --- /dev/null +++ b/arch/sh/include/asm/stat.h @@ -0,0 +1,138 @@ +#ifndef __ASM_SH_STAT_H +#define __ASM_SH_STAT_H + +struct __old_kernel_stat { + unsigned short st_dev; + unsigned short st_ino; + unsigned short st_mode; + unsigned short st_nlink; + unsigned short st_uid; + unsigned short st_gid; + unsigned short st_rdev; + unsigned long st_size; + unsigned long st_atime; + unsigned long st_mtime; + unsigned long st_ctime; +}; + +#if defined(__SH5__) || defined(CONFIG_CPU_SH5) +struct stat { + unsigned short st_dev; + unsigned short __pad1; + unsigned long st_ino; + unsigned short st_mode; + unsigned short st_nlink; + unsigned short st_uid; + unsigned short st_gid; + unsigned short st_rdev; + unsigned short __pad2; + unsigned long st_size; + unsigned long st_blksize; + unsigned long st_blocks; + unsigned long st_atime; + unsigned long st_atime_nsec; + unsigned long st_mtime; + unsigned long st_mtime_nsec; + unsigned long st_ctime; + unsigned long st_ctime_nsec; + unsigned long __unused4; + unsigned long __unused5; +}; + +/* This matches struct stat64 in glibc2.1, hence the absolutely + * insane amounts of padding around dev_t's. + */ +struct stat64 { + unsigned short st_dev; + unsigned char __pad0[10]; + + unsigned long st_ino; + unsigned int st_mode; + unsigned int st_nlink; + + unsigned long st_uid; + unsigned long st_gid; + + unsigned short st_rdev; + unsigned char __pad3[10]; + + long long st_size; + unsigned long st_blksize; + + unsigned long st_blocks; /* Number 512-byte blocks allocated. */ + unsigned long __pad4; /* future possible st_blocks high bits */ + + unsigned long st_atime; + unsigned long st_atime_nsec; + + unsigned long st_mtime; + unsigned long st_mtime_nsec; + + unsigned long st_ctime; + unsigned long st_ctime_nsec; /* will be high 32 bits of ctime someday */ + + unsigned long __unused1; + unsigned long __unused2; +}; +#else +struct stat { + unsigned long st_dev; + unsigned long st_ino; + unsigned short st_mode; + unsigned short st_nlink; + unsigned short st_uid; + unsigned short st_gid; + unsigned long st_rdev; + unsigned long st_size; + unsigned long st_blksize; + unsigned long st_blocks; + unsigned long st_atime; + unsigned long st_atime_nsec; + unsigned long st_mtime; + unsigned long st_mtime_nsec; + unsigned long st_ctime; + unsigned long st_ctime_nsec; + unsigned long __unused4; + unsigned long __unused5; +}; + +/* This matches struct stat64 in glibc2.1, hence the absolutely + * insane amounts of padding around dev_t's. + */ +struct stat64 { + unsigned long long st_dev; + unsigned char __pad0[4]; + +#define STAT64_HAS_BROKEN_ST_INO 1 + unsigned long __st_ino; + + unsigned int st_mode; + unsigned int st_nlink; + + unsigned long st_uid; + unsigned long st_gid; + + unsigned long long st_rdev; + unsigned char __pad3[4]; + + long long st_size; + unsigned long st_blksize; + + unsigned long long st_blocks; /* Number 512-byte blocks allocated. */ + + unsigned long st_atime; + unsigned long st_atime_nsec; + + unsigned long st_mtime; + unsigned long st_mtime_nsec; + + unsigned long st_ctime; + unsigned long st_ctime_nsec; + + unsigned long long st_ino; +}; + +#define STAT_HAVE_NSEC 1 +#endif + +#endif /* __ASM_SH_STAT_H */ diff --git a/arch/sh/include/asm/statfs.h b/arch/sh/include/asm/statfs.h new file mode 100644 index 00000000000..9202a023328 --- /dev/null +++ b/arch/sh/include/asm/statfs.h @@ -0,0 +1,6 @@ +#ifndef __ASM_SH_STATFS_H +#define __ASM_SH_STATFS_H + +#include + +#endif /* __ASM_SH_STATFS_H */ diff --git a/arch/sh/include/asm/string.h b/arch/sh/include/asm/string.h new file mode 100644 index 00000000000..8c1ea21dc0a --- /dev/null +++ b/arch/sh/include/asm/string.h @@ -0,0 +1,5 @@ +#ifdef CONFIG_SUPERH32 +# include "string_32.h" +#else +# include "string_64.h" +#endif diff --git a/arch/sh/include/asm/string_32.h b/arch/sh/include/asm/string_32.h new file mode 100644 index 00000000000..55f8db6bc1d --- /dev/null +++ b/arch/sh/include/asm/string_32.h @@ -0,0 +1,131 @@ +#ifndef __ASM_SH_STRING_H +#define __ASM_SH_STRING_H + +#ifdef __KERNEL__ + +/* + * Copyright (C) 1999 Niibe Yutaka + * But consider these trivial functions to be public domain. + */ + +#define __HAVE_ARCH_STRCPY +static inline char *strcpy(char *__dest, const char *__src) +{ + register char *__xdest = __dest; + unsigned long __dummy; + + __asm__ __volatile__("1:\n\t" + "mov.b @%1+, %2\n\t" + "mov.b %2, @%0\n\t" + "cmp/eq #0, %2\n\t" + "bf/s 1b\n\t" + " add #1, %0\n\t" + : "=r" (__dest), "=r" (__src), "=&z" (__dummy) + : "0" (__dest), "1" (__src) + : "memory", "t"); + + return __xdest; +} + +#define __HAVE_ARCH_STRNCPY +static inline char *strncpy(char *__dest, const char *__src, size_t __n) +{ + register char *__xdest = __dest; + unsigned long __dummy; + + if (__n == 0) + return __xdest; + + __asm__ __volatile__( + "1:\n" + "mov.b @%1+, %2\n\t" + "mov.b %2, @%0\n\t" + "cmp/eq #0, %2\n\t" + "bt/s 2f\n\t" + " cmp/eq %5,%1\n\t" + "bf/s 1b\n\t" + " add #1, %0\n" + "2:" + : "=r" (__dest), "=r" (__src), "=&z" (__dummy) + : "0" (__dest), "1" (__src), "r" (__src+__n) + : "memory", "t"); + + return __xdest; +} + +#define __HAVE_ARCH_STRCMP +static inline int strcmp(const char *__cs, const char *__ct) +{ + register int __res; + unsigned long __dummy; + + __asm__ __volatile__( + "mov.b @%1+, %3\n" + "1:\n\t" + "mov.b @%0+, %2\n\t" + "cmp/eq #0, %3\n\t" + "bt 2f\n\t" + "cmp/eq %2, %3\n\t" + "bt/s 1b\n\t" + " mov.b @%1+, %3\n\t" + "add #-2, %1\n\t" + "mov.b @%1, %3\n\t" + "sub %3, %2\n" + "2:" + : "=r" (__cs), "=r" (__ct), "=&r" (__res), "=&z" (__dummy) + : "0" (__cs), "1" (__ct) + : "t"); + + return __res; +} + +#define __HAVE_ARCH_STRNCMP +static inline int strncmp(const char *__cs, const char *__ct, size_t __n) +{ + register int __res; + unsigned long __dummy; + + if (__n == 0) + return 0; + + __asm__ __volatile__( + "mov.b @%1+, %3\n" + "1:\n\t" + "mov.b @%0+, %2\n\t" + "cmp/eq %6, %0\n\t" + "bt/s 2f\n\t" + " cmp/eq #0, %3\n\t" + "bt/s 3f\n\t" + " cmp/eq %3, %2\n\t" + "bt/s 1b\n\t" + " mov.b @%1+, %3\n\t" + "add #-2, %1\n\t" + "mov.b @%1, %3\n" + "2:\n\t" + "sub %3, %2\n" + "3:" + :"=r" (__cs), "=r" (__ct), "=&r" (__res), "=&z" (__dummy) + : "0" (__cs), "1" (__ct), "r" (__cs+__n) + : "t"); + + return __res; +} + +#define __HAVE_ARCH_MEMSET +extern void *memset(void *__s, int __c, size_t __count); + +#define __HAVE_ARCH_MEMCPY +extern void *memcpy(void *__to, __const__ void *__from, size_t __n); + +#define __HAVE_ARCH_MEMMOVE +extern void *memmove(void *__dest, __const__ void *__src, size_t __n); + +#define __HAVE_ARCH_MEMCHR +extern void *memchr(const void *__s, int __c, size_t __n); + +#define __HAVE_ARCH_STRLEN +extern size_t strlen(const char *); + +#endif /* __KERNEL__ */ + +#endif /* __ASM_SH_STRING_H */ diff --git a/arch/sh/include/asm/string_64.h b/arch/sh/include/asm/string_64.h new file mode 100644 index 00000000000..aa1fef229c7 --- /dev/null +++ b/arch/sh/include/asm/string_64.h @@ -0,0 +1,17 @@ +#ifndef __ASM_SH_STRING_64_H +#define __ASM_SH_STRING_64_H + +/* + * include/asm-sh/string_64.h + * + * Copyright (C) 2000, 2001 Paolo Alberelli + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#define __HAVE_ARCH_MEMCPY +extern void *memcpy(void *dest, const void *src, size_t count); + +#endif /* __ASM_SH_STRING_64_H */ diff --git a/arch/sh/include/asm/system.h b/arch/sh/include/asm/system.h new file mode 100644 index 00000000000..056d68cd210 --- /dev/null +++ b/arch/sh/include/asm/system.h @@ -0,0 +1,190 @@ +#ifndef __ASM_SH_SYSTEM_H +#define __ASM_SH_SYSTEM_H + +/* + * Copyright (C) 1999, 2000 Niibe Yutaka & Kaz Kojima + * Copyright (C) 2002 Paul Mundt + */ + +#include +#include +#include +#include +#include + +#define AT_VECTOR_SIZE_ARCH 5 /* entries in ARCH_DLINFO */ + +#if defined(CONFIG_CPU_SH4A) || defined(CONFIG_CPU_SH5) +#define __icbi() \ +{ \ + unsigned long __addr; \ + __addr = 0xa8000000; \ + __asm__ __volatile__( \ + "icbi %0\n\t" \ + : /* no output */ \ + : "m" (__m(__addr))); \ +} +#endif + +/* + * A brief note on ctrl_barrier(), the control register write barrier. + * + * Legacy SH cores typically require a sequence of 8 nops after + * modification of a control register in order for the changes to take + * effect. On newer cores (like the sh4a and sh5) this is accomplished + * with icbi. + * + * Also note that on sh4a in the icbi case we can forego a synco for the + * write barrier, as it's not necessary for control registers. + * + * Historically we have only done this type of barrier for the MMUCR, but + * it's also necessary for the CCR, so we make it generic here instead. + */ +#if defined(CONFIG_CPU_SH4A) || defined(CONFIG_CPU_SH5) +#define mb() __asm__ __volatile__ ("synco": : :"memory") +#define rmb() mb() +#define wmb() __asm__ __volatile__ ("synco": : :"memory") +#define ctrl_barrier() __icbi() +#define read_barrier_depends() do { } while(0) +#else +#define mb() __asm__ __volatile__ ("": : :"memory") +#define rmb() mb() +#define wmb() __asm__ __volatile__ ("": : :"memory") +#define ctrl_barrier() __asm__ __volatile__ ("nop;nop;nop;nop;nop;nop;nop;nop") +#define read_barrier_depends() do { } while(0) +#endif + +#ifdef CONFIG_SMP +#define smp_mb() mb() +#define smp_rmb() rmb() +#define smp_wmb() wmb() +#define smp_read_barrier_depends() read_barrier_depends() +#else +#define smp_mb() barrier() +#define smp_rmb() barrier() +#define smp_wmb() barrier() +#define smp_read_barrier_depends() do { } while(0) +#endif + +#define set_mb(var, value) do { (void)xchg(&var, value); } while (0) + +#ifdef CONFIG_GUSA_RB +#include +#else +#include +#endif + +extern void __xchg_called_with_bad_pointer(void); + +#define __xchg(ptr, x, size) \ +({ \ + unsigned long __xchg__res; \ + volatile void *__xchg_ptr = (ptr); \ + switch (size) { \ + case 4: \ + __xchg__res = xchg_u32(__xchg_ptr, x); \ + break; \ + case 1: \ + __xchg__res = xchg_u8(__xchg_ptr, x); \ + break; \ + default: \ + __xchg_called_with_bad_pointer(); \ + __xchg__res = x; \ + break; \ + } \ + \ + __xchg__res; \ +}) + +#define xchg(ptr,x) \ + ((__typeof__(*(ptr)))__xchg((ptr),(unsigned long)(x), sizeof(*(ptr)))) + +/* This function doesn't exist, so you'll get a linker error + * if something tries to do an invalid cmpxchg(). */ +extern void __cmpxchg_called_with_bad_pointer(void); + +#define __HAVE_ARCH_CMPXCHG 1 + +static inline unsigned long __cmpxchg(volatile void * ptr, unsigned long old, + unsigned long new, int size) +{ + switch (size) { + case 4: + return __cmpxchg_u32(ptr, old, new); + } + __cmpxchg_called_with_bad_pointer(); + return old; +} + +#define cmpxchg(ptr,o,n) \ + ({ \ + __typeof__(*(ptr)) _o_ = (o); \ + __typeof__(*(ptr)) _n_ = (n); \ + (__typeof__(*(ptr))) __cmpxchg((ptr), (unsigned long)_o_, \ + (unsigned long)_n_, sizeof(*(ptr))); \ + }) + +extern void die(const char *str, struct pt_regs *regs, long err) __attribute__ ((noreturn)); + +extern void *set_exception_table_vec(unsigned int vec, void *handler); + +static inline void *set_exception_table_evt(unsigned int evt, void *handler) +{ + return set_exception_table_vec(evt >> 5, handler); +} + +/* + * SH-2A has both 16 and 32-bit opcodes, do lame encoding checks. + */ +#ifdef CONFIG_CPU_SH2A +extern unsigned int instruction_size(unsigned int insn); +#elif defined(CONFIG_SUPERH32) +#define instruction_size(insn) (2) +#else +#define instruction_size(insn) (4) +#endif + +extern unsigned long cached_to_uncached; + +extern struct dentry *sh_debugfs_root; + +void per_cpu_trap_init(void); + +asmlinkage void break_point_trap(void); + +#ifdef CONFIG_SUPERH32 +#define BUILD_TRAP_HANDLER(name) \ +asmlinkage void name##_trap_handler(unsigned long r4, unsigned long r5, \ + unsigned long r6, unsigned long r7, \ + struct pt_regs __regs) + +#define TRAP_HANDLER_DECL \ + struct pt_regs *regs = RELOC_HIDE(&__regs, 0); \ + unsigned int vec = regs->tra; \ + (void)vec; +#else +#define BUILD_TRAP_HANDLER(name) \ +asmlinkage void name##_trap_handler(unsigned int vec, struct pt_regs *regs) +#define TRAP_HANDLER_DECL +#endif + +BUILD_TRAP_HANDLER(address_error); +BUILD_TRAP_HANDLER(debug); +BUILD_TRAP_HANDLER(bug); +BUILD_TRAP_HANDLER(fpu_error); +BUILD_TRAP_HANDLER(fpu_state_restore); + +#define arch_align_stack(x) (x) + +struct mem_access { + unsigned long (*from)(void *dst, const void *src, unsigned long cnt); + unsigned long (*to)(void *dst, const void *src, unsigned long cnt); +}; + +#ifdef CONFIG_SUPERH32 +# include "system_32.h" +#else +# include "system_64.h" +#endif + +#endif diff --git a/arch/sh/include/asm/system_32.h b/arch/sh/include/asm/system_32.h new file mode 100644 index 00000000000..f11bcf0855e --- /dev/null +++ b/arch/sh/include/asm/system_32.h @@ -0,0 +1,102 @@ +#ifndef __ASM_SH_SYSTEM_32_H +#define __ASM_SH_SYSTEM_32_H + +#include + +struct task_struct *__switch_to(struct task_struct *prev, + struct task_struct *next); + +/* + * switch_to() should switch tasks to task nr n, first + */ +#define switch_to(prev, next, last) \ +do { \ + register u32 *__ts1 __asm__ ("r1") = (u32 *)&prev->thread.sp; \ + register u32 *__ts2 __asm__ ("r2") = (u32 *)&prev->thread.pc; \ + register u32 *__ts4 __asm__ ("r4") = (u32 *)prev; \ + register u32 *__ts5 __asm__ ("r5") = (u32 *)next; \ + register u32 *__ts6 __asm__ ("r6") = (u32 *)&next->thread.sp; \ + register u32 __ts7 __asm__ ("r7") = next->thread.pc; \ + struct task_struct *__last; \ + \ + __asm__ __volatile__ ( \ + ".balign 4\n\t" \ + "stc.l gbr, @-r15\n\t" \ + "sts.l pr, @-r15\n\t" \ + "mov.l r8, @-r15\n\t" \ + "mov.l r9, @-r15\n\t" \ + "mov.l r10, @-r15\n\t" \ + "mov.l r11, @-r15\n\t" \ + "mov.l r12, @-r15\n\t" \ + "mov.l r13, @-r15\n\t" \ + "mov.l r14, @-r15\n\t" \ + "mov.l r15, @r1\t! save SP\n\t" \ + "mov.l @r6, r15\t! change to new stack\n\t" \ + "mova 1f, %0\n\t" \ + "mov.l %0, @r2\t! save PC\n\t" \ + "mov.l 2f, %0\n\t" \ + "jmp @%0\t! call __switch_to\n\t" \ + " lds r7, pr\t! with return to new PC\n\t" \ + ".balign 4\n" \ + "2:\n\t" \ + ".long __switch_to\n" \ + "1:\n\t" \ + "mov.l @r15+, r14\n\t" \ + "mov.l @r15+, r13\n\t" \ + "mov.l @r15+, r12\n\t" \ + "mov.l @r15+, r11\n\t" \ + "mov.l @r15+, r10\n\t" \ + "mov.l @r15+, r9\n\t" \ + "mov.l @r15+, r8\n\t" \ + "lds.l @r15+, pr\n\t" \ + "ldc.l @r15+, gbr\n\t" \ + : "=z" (__last) \ + : "r" (__ts1), "r" (__ts2), "r" (__ts4), \ + "r" (__ts5), "r" (__ts6), "r" (__ts7) \ + : "r3", "t"); \ + \ + last = __last; \ +} while (0) + +#define __uses_jump_to_uncached __attribute__ ((__section__ (".uncached.text"))) + +/* + * Jump to uncached area. + * When handling TLB or caches, we need to do it from an uncached area. + */ +#define jump_to_uncached() \ +do { \ + unsigned long __dummy; \ + \ + __asm__ __volatile__( \ + "mova 1f, %0\n\t" \ + "add %1, %0\n\t" \ + "jmp @%0\n\t" \ + " nop\n\t" \ + ".balign 4\n" \ + "1:" \ + : "=&z" (__dummy) \ + : "r" (cached_to_uncached)); \ +} while (0) + +/* + * Back to cached area. + */ +#define back_to_cached() \ +do { \ + unsigned long __dummy; \ + ctrl_barrier(); \ + __asm__ __volatile__( \ + "mov.l 1f, %0\n\t" \ + "jmp @%0\n\t" \ + " nop\n\t" \ + ".balign 4\n" \ + "1: .long 2f\n" \ + "2:" \ + : "=&r" (__dummy)); \ +} while (0) + +int handle_unaligned_access(opcode_t instruction, struct pt_regs *regs, + struct mem_access *ma); + +#endif /* __ASM_SH_SYSTEM_32_H */ diff --git a/arch/sh/include/asm/system_64.h b/arch/sh/include/asm/system_64.h new file mode 100644 index 00000000000..943acf5ea07 --- /dev/null +++ b/arch/sh/include/asm/system_64.h @@ -0,0 +1,40 @@ +#ifndef __ASM_SH_SYSTEM_64_H +#define __ASM_SH_SYSTEM_64_H + +/* + * include/asm-sh/system_64.h + * + * Copyright (C) 2000, 2001 Paolo Alberelli + * Copyright (C) 2003 Paul Mundt + * Copyright (C) 2004 Richard Curnow + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include + +/* + * switch_to() should switch tasks to task nr n, first + */ +struct task_struct *sh64_switch_to(struct task_struct *prev, + struct thread_struct *prev_thread, + struct task_struct *next, + struct thread_struct *next_thread); + +#define switch_to(prev,next,last) \ +do { \ + if (last_task_used_math != next) { \ + struct pt_regs *regs = next->thread.uregs; \ + if (regs) regs->sr |= SR_FD; \ + } \ + last = sh64_switch_to(prev, &prev->thread, next, \ + &next->thread); \ +} while (0) + +#define __uses_jump_to_uncached + +#define jump_to_uncached() do { } while (0) +#define back_to_cached() do { } while (0) + +#endif /* __ASM_SH_SYSTEM_64_H */ diff --git a/arch/sh/include/asm/systemh7751.h b/arch/sh/include/asm/systemh7751.h new file mode 100644 index 00000000000..4161122c84e --- /dev/null +++ b/arch/sh/include/asm/systemh7751.h @@ -0,0 +1,71 @@ +#ifndef __ASM_SH_SYSTEMH_7751SYSTEMH_H +#define __ASM_SH_SYSTEMH_7751SYSTEMH_H + +/* + * linux/include/asm-sh/systemh/7751systemh.h + * + * Copyright (C) 2000 Kazumoto Kojima + * + * Hitachi SystemH support + + * Modified for 7751 SystemH by + * Jonathan Short, 2002. + */ + +/* Box specific addresses. */ + +#define PA_ROM 0x00000000 /* EPROM */ +#define PA_ROM_SIZE 0x00400000 /* EPROM size 4M byte */ +#define PA_FROM 0x01000000 /* EPROM */ +#define PA_FROM_SIZE 0x00400000 /* EPROM size 4M byte */ +#define PA_EXT1 0x04000000 +#define PA_EXT1_SIZE 0x04000000 +#define PA_EXT2 0x08000000 +#define PA_EXT2_SIZE 0x04000000 +#define PA_SDRAM 0x0c000000 +#define PA_SDRAM_SIZE 0x04000000 + +#define PA_EXT4 0x12000000 +#define PA_EXT4_SIZE 0x02000000 +#define PA_EXT5 0x14000000 +#define PA_EXT5_SIZE 0x04000000 +#define PA_PCIC 0x18000000 /* MR-SHPC-01 PCMCIA */ + +#define PA_DIPSW0 0xb9000000 /* Dip switch 5,6 */ +#define PA_DIPSW1 0xb9000002 /* Dip switch 7,8 */ +#define PA_LED 0xba000000 /* LED */ +#define PA_BCR 0xbb000000 /* FPGA on the MS7751SE01 */ + +#define PA_MRSHPC 0xb83fffe0 /* MR-SHPC-01 PCMCIA controller */ +#define PA_MRSHPC_MW1 0xb8400000 /* MR-SHPC-01 memory window base */ +#define PA_MRSHPC_MW2 0xb8500000 /* MR-SHPC-01 attribute window base */ +#define PA_MRSHPC_IO 0xb8600000 /* MR-SHPC-01 I/O window base */ +#define MRSHPC_MODE (PA_MRSHPC + 4) +#define MRSHPC_OPTION (PA_MRSHPC + 6) +#define MRSHPC_CSR (PA_MRSHPC + 8) +#define MRSHPC_ISR (PA_MRSHPC + 10) +#define MRSHPC_ICR (PA_MRSHPC + 12) +#define MRSHPC_CPWCR (PA_MRSHPC + 14) +#define MRSHPC_MW0CR1 (PA_MRSHPC + 16) +#define MRSHPC_MW1CR1 (PA_MRSHPC + 18) +#define MRSHPC_IOWCR1 (PA_MRSHPC + 20) +#define MRSHPC_MW0CR2 (PA_MRSHPC + 22) +#define MRSHPC_MW1CR2 (PA_MRSHPC + 24) +#define MRSHPC_IOWCR2 (PA_MRSHPC + 26) +#define MRSHPC_CDCR (PA_MRSHPC + 28) +#define MRSHPC_PCIC_INFO (PA_MRSHPC + 30) + +#define BCR_ILCRA (PA_BCR + 0) +#define BCR_ILCRB (PA_BCR + 2) +#define BCR_ILCRC (PA_BCR + 4) +#define BCR_ILCRD (PA_BCR + 6) +#define BCR_ILCRE (PA_BCR + 8) +#define BCR_ILCRF (PA_BCR + 10) +#define BCR_ILCRG (PA_BCR + 12) + +#define IRQ_79C973 13 + +#define __IO_PREFIX sh7751systemh +#include + +#endif /* __ASM_SH_SYSTEMH_7751SYSTEMH_H */ diff --git a/arch/sh/include/asm/termbits.h b/arch/sh/include/asm/termbits.h new file mode 100644 index 00000000000..77db116948c --- /dev/null +++ b/arch/sh/include/asm/termbits.h @@ -0,0 +1,198 @@ +#ifndef __ASM_SH_TERMBITS_H +#define __ASM_SH_TERMBITS_H + +#include + +typedef unsigned char cc_t; +typedef unsigned int speed_t; +typedef unsigned int tcflag_t; + +#define NCCS 19 +struct termios { + tcflag_t c_iflag; /* input mode flags */ + tcflag_t c_oflag; /* output mode flags */ + tcflag_t c_cflag; /* control mode flags */ + tcflag_t c_lflag; /* local mode flags */ + cc_t c_line; /* line discipline */ + cc_t c_cc[NCCS]; /* control characters */ +}; + +struct termios2 { + tcflag_t c_iflag; /* input mode flags */ + tcflag_t c_oflag; /* output mode flags */ + tcflag_t c_cflag; /* control mode flags */ + tcflag_t c_lflag; /* local mode flags */ + cc_t c_line; /* line discipline */ + cc_t c_cc[NCCS]; /* control characters */ + speed_t c_ispeed; /* input speed */ + speed_t c_ospeed; /* output speed */ +}; + +struct ktermios { + tcflag_t c_iflag; /* input mode flags */ + tcflag_t c_oflag; /* output mode flags */ + tcflag_t c_cflag; /* control mode flags */ + tcflag_t c_lflag; /* local mode flags */ + cc_t c_line; /* line discipline */ + cc_t c_cc[NCCS]; /* control characters */ + speed_t c_ispeed; /* input speed */ + speed_t c_ospeed; /* output speed */ +}; + +/* c_cc characters */ +#define VINTR 0 +#define VQUIT 1 +#define VERASE 2 +#define VKILL 3 +#define VEOF 4 +#define VTIME 5 +#define VMIN 6 +#define VSWTC 7 +#define VSTART 8 +#define VSTOP 9 +#define VSUSP 10 +#define VEOL 11 +#define VREPRINT 12 +#define VDISCARD 13 +#define VWERASE 14 +#define VLNEXT 15 +#define VEOL2 16 + +/* c_iflag bits */ +#define IGNBRK 0000001 +#define BRKINT 0000002 +#define IGNPAR 0000004 +#define PARMRK 0000010 +#define INPCK 0000020 +#define ISTRIP 0000040 +#define INLCR 0000100 +#define IGNCR 0000200 +#define ICRNL 0000400 +#define IUCLC 0001000 +#define IXON 0002000 +#define IXANY 0004000 +#define IXOFF 0010000 +#define IMAXBEL 0020000 +#define IUTF8 0040000 + +/* c_oflag bits */ +#define OPOST 0000001 +#define OLCUC 0000002 +#define ONLCR 0000004 +#define OCRNL 0000010 +#define ONOCR 0000020 +#define ONLRET 0000040 +#define OFILL 0000100 +#define OFDEL 0000200 +#define NLDLY 0000400 +#define NL0 0000000 +#define NL1 0000400 +#define CRDLY 0003000 +#define CR0 0000000 +#define CR1 0001000 +#define CR2 0002000 +#define CR3 0003000 +#define TABDLY 0014000 +#define TAB0 0000000 +#define TAB1 0004000 +#define TAB2 0010000 +#define TAB3 0014000 +#define XTABS 0014000 +#define BSDLY 0020000 +#define BS0 0000000 +#define BS1 0020000 +#define VTDLY 0040000 +#define VT0 0000000 +#define VT1 0040000 +#define FFDLY 0100000 +#define FF0 0000000 +#define FF1 0100000 + +/* c_cflag bit meaning */ +#define CBAUD 0010017 +#define B0 0000000 /* hang up */ +#define B50 0000001 +#define B75 0000002 +#define B110 0000003 +#define B134 0000004 +#define B150 0000005 +#define B200 0000006 +#define B300 0000007 +#define B600 0000010 +#define B1200 0000011 +#define B1800 0000012 +#define B2400 0000013 +#define B4800 0000014 +#define B9600 0000015 +#define B19200 0000016 +#define B38400 0000017 +#define EXTA B19200 +#define EXTB B38400 +#define CSIZE 0000060 +#define CS5 0000000 +#define CS6 0000020 +#define CS7 0000040 +#define CS8 0000060 +#define CSTOPB 0000100 +#define CREAD 0000200 +#define PARENB 0000400 +#define PARODD 0001000 +#define HUPCL 0002000 +#define CLOCAL 0004000 +#define CBAUDEX 0010000 +#define BOTHER 0010000 +#define B57600 0010001 +#define B115200 0010002 +#define B230400 0010003 +#define B460800 0010004 +#define B500000 0010005 +#define B576000 0010006 +#define B921600 0010007 +#define B1000000 0010010 +#define B1152000 0010011 +#define B1500000 0010012 +#define B2000000 0010013 +#define B2500000 0010014 +#define B3000000 0010015 +#define B3500000 0010016 +#define B4000000 0010017 +#define CIBAUD 002003600000 /* input baud rate */ +#define CMSPAR 010000000000 /* mark or space (stick) parity */ +#define CRTSCTS 020000000000 /* flow control */ + +#define IBSHIFT 16 /* Shift from CBAUD to CIBAUD */ + +/* c_lflag bits */ +#define ISIG 0000001 +#define ICANON 0000002 +#define XCASE 0000004 +#define ECHO 0000010 +#define ECHOE 0000020 +#define ECHOK 0000040 +#define ECHONL 0000100 +#define NOFLSH 0000200 +#define TOSTOP 0000400 +#define ECHOCTL 0001000 +#define ECHOPRT 0002000 +#define ECHOKE 0004000 +#define FLUSHO 0010000 +#define PENDIN 0040000 +#define IEXTEN 0100000 + +/* tcflow() and TCXONC use these */ +#define TCOOFF 0 +#define TCOON 1 +#define TCIOFF 2 +#define TCION 3 + +/* tcflush() and TCFLSH use these */ +#define TCIFLUSH 0 +#define TCOFLUSH 1 +#define TCIOFLUSH 2 + +/* tcsetattr uses these */ +#define TCSANOW 0 +#define TCSADRAIN 1 +#define TCSAFLUSH 2 + +#endif /* __ASM_SH_TERMBITS_H */ diff --git a/arch/sh/include/asm/termios.h b/arch/sh/include/asm/termios.h new file mode 100644 index 00000000000..0a8c793c76f --- /dev/null +++ b/arch/sh/include/asm/termios.h @@ -0,0 +1,90 @@ +#ifndef __ASM_SH_TERMIOS_H +#define __ASM_SH_TERMIOS_H + +#include +#include + +struct winsize { + unsigned short ws_row; + unsigned short ws_col; + unsigned short ws_xpixel; + unsigned short ws_ypixel; +}; + +#define NCC 8 +struct termio { + unsigned short c_iflag; /* input mode flags */ + unsigned short c_oflag; /* output mode flags */ + unsigned short c_cflag; /* control mode flags */ + unsigned short c_lflag; /* local mode flags */ + unsigned char c_line; /* line discipline */ + unsigned char c_cc[NCC]; /* control characters */ +}; + +/* modem lines */ +#define TIOCM_LE 0x001 +#define TIOCM_DTR 0x002 +#define TIOCM_RTS 0x004 +#define TIOCM_ST 0x008 +#define TIOCM_SR 0x010 +#define TIOCM_CTS 0x020 +#define TIOCM_CAR 0x040 +#define TIOCM_RNG 0x080 +#define TIOCM_DSR 0x100 +#define TIOCM_CD TIOCM_CAR +#define TIOCM_RI TIOCM_RNG +#define TIOCM_OUT1 0x2000 +#define TIOCM_OUT2 0x4000 +#define TIOCM_LOOP 0x8000 + +/* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */ + +#ifdef __KERNEL__ + +/* intr=^C quit=^\ erase=del kill=^U + eof=^D vtime=\0 vmin=\1 sxtc=\0 + start=^Q stop=^S susp=^Z eol=\0 + reprint=^R discard=^U werase=^W lnext=^V + eol2=\0 +*/ +#define INIT_C_CC "\003\034\177\025\004\0\1\0\021\023\032\0\022\017\027\026\0" + +/* + * Translate a "termio" structure into a "termios". Ugh. + */ +#define SET_LOW_TERMIOS_BITS(termios, termio, x) { \ + unsigned short __tmp; \ + get_user(__tmp,&(termio)->x); \ + *(unsigned short *) &(termios)->x = __tmp; \ +} + +#define user_termio_to_kernel_termios(termios, termio) \ +({ \ + SET_LOW_TERMIOS_BITS(termios, termio, c_iflag); \ + SET_LOW_TERMIOS_BITS(termios, termio, c_oflag); \ + SET_LOW_TERMIOS_BITS(termios, termio, c_cflag); \ + SET_LOW_TERMIOS_BITS(termios, termio, c_lflag); \ + copy_from_user((termios)->c_cc, (termio)->c_cc, NCC); \ +}) + +/* + * Translate a "termios" structure into a "termio". Ugh. + */ +#define kernel_termios_to_user_termio(termio, termios) \ +({ \ + put_user((termios)->c_iflag, &(termio)->c_iflag); \ + put_user((termios)->c_oflag, &(termio)->c_oflag); \ + put_user((termios)->c_cflag, &(termio)->c_cflag); \ + put_user((termios)->c_lflag, &(termio)->c_lflag); \ + put_user((termios)->c_line, &(termio)->c_line); \ + copy_to_user((termio)->c_cc, (termios)->c_cc, NCC); \ +}) + +#define user_termios_to_kernel_termios(k, u) copy_from_user(k, u, sizeof(struct termios2)) +#define kernel_termios_to_user_termios(u, k) copy_to_user(u, k, sizeof(struct termios2)) +#define user_termios_to_kernel_termios_1(k, u) copy_from_user(k, u, sizeof(struct termios)) +#define kernel_termios_to_user_termios_1(u, k) copy_to_user(u, k, sizeof(struct termios)) + +#endif /* __KERNEL__ */ + +#endif /* __ASM_SH_TERMIOS_H */ diff --git a/arch/sh/include/asm/thread_info.h b/arch/sh/include/asm/thread_info.h new file mode 100644 index 00000000000..eeb4c747119 --- /dev/null +++ b/arch/sh/include/asm/thread_info.h @@ -0,0 +1,141 @@ +#ifndef __ASM_SH_THREAD_INFO_H +#define __ASM_SH_THREAD_INFO_H + +/* SuperH version + * Copyright (C) 2002 Niibe Yutaka + * + * The copyright of original i386 version is: + * + * Copyright (C) 2002 David Howells (dhowells@redhat.com) + * - Incorporating suggestions made by Linus Torvalds and Dave Miller + */ +#ifdef __KERNEL__ +#include + +#ifndef __ASSEMBLY__ +#include + +struct thread_info { + struct task_struct *task; /* main task structure */ + struct exec_domain *exec_domain; /* execution domain */ + unsigned long flags; /* low level flags */ + __u32 cpu; + int preempt_count; /* 0 => preemptable, <0 => BUG */ + mm_segment_t addr_limit; /* thread address space */ + struct restart_block restart_block; + unsigned long previous_sp; /* sp of previous stack in case + of nested IRQ stacks */ + __u8 supervisor_stack[0]; +}; + +#endif + +#define PREEMPT_ACTIVE 0x10000000 + +#if defined(CONFIG_4KSTACKS) +#define THREAD_SIZE_ORDER (0) +#elif defined(CONFIG_PAGE_SIZE_4KB) +#define THREAD_SIZE_ORDER (1) +#elif defined(CONFIG_PAGE_SIZE_8KB) +#define THREAD_SIZE_ORDER (1) +#elif defined(CONFIG_PAGE_SIZE_16KB) +#define THREAD_SIZE_ORDER (0) +#elif defined(CONFIG_PAGE_SIZE_64KB) +#define THREAD_SIZE_ORDER (0) +#else +#error "Unknown thread size" +#endif + +#define THREAD_SIZE (PAGE_SIZE << THREAD_SIZE_ORDER) +#define STACK_WARN (THREAD_SIZE >> 3) + +/* + * macros/functions for gaining access to the thread information structure + */ +#ifndef __ASSEMBLY__ +#define INIT_THREAD_INFO(tsk) \ +{ \ + .task = &tsk, \ + .exec_domain = &default_exec_domain, \ + .flags = 0, \ + .cpu = 0, \ + .preempt_count = 1, \ + .addr_limit = KERNEL_DS, \ + .restart_block = { \ + .fn = do_no_restart_syscall, \ + }, \ +} + +#define init_thread_info (init_thread_union.thread_info) +#define init_stack (init_thread_union.stack) + +/* how to get the current stack pointer from C */ +register unsigned long current_stack_pointer asm("r15") __used; + +/* how to get the thread information struct from C */ +static inline struct thread_info *current_thread_info(void) +{ + struct thread_info *ti; +#if defined(CONFIG_SUPERH64) + __asm__ __volatile__ ("getcon cr17, %0" : "=r" (ti)); +#elif defined(CONFIG_CPU_HAS_SR_RB) + __asm__ __volatile__ ("stc r7_bank, %0" : "=r" (ti)); +#else + unsigned long __dummy; + + __asm__ __volatile__ ( + "mov r15, %0\n\t" + "and %1, %0\n\t" + : "=&r" (ti), "=r" (__dummy) + : "1" (~(THREAD_SIZE - 1)) + : "memory"); +#endif + + return ti; +} + +#define __HAVE_ARCH_THREAD_INFO_ALLOCATOR + +/* thread information allocation */ +#ifdef CONFIG_DEBUG_STACK_USAGE +#define alloc_thread_info(ti) kzalloc(THREAD_SIZE, GFP_KERNEL) +#else +#define alloc_thread_info(ti) kmalloc(THREAD_SIZE, GFP_KERNEL) +#endif +#define free_thread_info(ti) kfree(ti) + +#endif /* __ASSEMBLY__ */ + +/* + * thread information flags + * - these are process state flags that various assembly files may need to access + * - pending work-to-be-done flags are in LSW + * - other flags in MSW + */ +#define TIF_SYSCALL_TRACE 0 /* syscall trace active */ +#define TIF_SIGPENDING 1 /* signal pending */ +#define TIF_NEED_RESCHED 2 /* rescheduling necessary */ +#define TIF_RESTORE_SIGMASK 3 /* restore signal mask in do_signal() */ +#define TIF_SINGLESTEP 4 /* singlestepping active */ +#define TIF_SYSCALL_AUDIT 5 +#define TIF_USEDFPU 16 /* FPU was used by this task this quantum (SMP) */ +#define TIF_POLLING_NRFLAG 17 /* true if poll_idle() is polling TIF_NEED_RESCHED */ +#define TIF_MEMDIE 18 +#define TIF_FREEZE 19 + +#define _TIF_SYSCALL_TRACE (1< +#include +#include + +struct sys_timer_ops { + int (*init)(void); + int (*start)(void); + int (*stop)(void); + cycle_t (*read)(void); +#ifndef CONFIG_GENERIC_TIME + unsigned long (*get_offset)(void); +#endif +}; + +struct sys_timer { + const char *name; + + struct sys_device dev; + struct sys_timer_ops *ops; +}; + +#define TICK_SIZE (tick_nsec / 1000) + +extern struct sys_timer tmu_timer, cmt_timer, mtu2_timer; +extern struct sys_timer *sys_timer; + +#ifndef CONFIG_GENERIC_TIME +static inline unsigned long get_timer_offset(void) +{ + return sys_timer->ops->get_offset(); +} +#endif + +/* arch/sh/kernel/timers/timer.c */ +struct sys_timer *get_sys_timer(void); + +/* arch/sh/kernel/time.c */ +void handle_timer_tick(void); +extern unsigned long sh_hpt_frequency; + +#endif /* __ASM_SH_TIMER_H */ diff --git a/arch/sh/include/asm/timex.h b/arch/sh/include/asm/timex.h new file mode 100644 index 00000000000..a873e24113c --- /dev/null +++ b/arch/sh/include/asm/timex.h @@ -0,0 +1,18 @@ +/* + * linux/include/asm-sh/timex.h + * + * sh architecture timex specifications + */ +#ifndef __ASM_SH_TIMEX_H +#define __ASM_SH_TIMEX_H + +#define CLOCK_TICK_RATE (CONFIG_SH_PCLK_FREQ / 4) /* Underlying HZ */ + +typedef unsigned long long cycles_t; + +static __inline__ cycles_t get_cycles (void) +{ + return 0; +} + +#endif /* __ASM_SH_TIMEX_H */ diff --git a/arch/sh/include/asm/titan.h b/arch/sh/include/asm/titan.h new file mode 100644 index 00000000000..03f3583c891 --- /dev/null +++ b/arch/sh/include/asm/titan.h @@ -0,0 +1,17 @@ +/* + * Platform defintions for Titan + */ +#ifndef _ASM_SH_TITAN_H +#define _ASM_SH_TITAN_H + +#define __IO_PREFIX titan +#include + +/* IRQ assignments */ +#define TITAN_IRQ_WAN 2 /* eth0 (WAN) */ +#define TITAN_IRQ_LAN 5 /* eth1 (LAN) */ +#define TITAN_IRQ_MPCIA 8 /* mPCI A */ +#define TITAN_IRQ_MPCIB 11 /* mPCI B */ +#define TITAN_IRQ_USB 11 /* USB */ + +#endif /* __ASM_SH_TITAN_H */ diff --git a/arch/sh/include/asm/tlb.h b/arch/sh/include/asm/tlb.h new file mode 100644 index 00000000000..88ff1ae8a6b --- /dev/null +++ b/arch/sh/include/asm/tlb.h @@ -0,0 +1,27 @@ +#ifndef __ASM_SH_TLB_H +#define __ASM_SH_TLB_H + +#ifdef CONFIG_SUPERH64 +# include "tlb_64.h" +#endif + +#ifndef __ASSEMBLY__ + +#define tlb_start_vma(tlb, vma) \ + flush_cache_range(vma, vma->vm_start, vma->vm_end) + +#define tlb_end_vma(tlb, vma) \ + flush_tlb_range(vma, vma->vm_start, vma->vm_end) + +#define __tlb_remove_tlb_entry(tlb, pte, address) do { } while (0) + +/* + * Flush whole TLBs for MM + */ +#define tlb_flush(tlb) flush_tlb_mm((tlb)->mm) + +#include +#include + +#endif /* __ASSEMBLY__ */ +#endif /* __ASM_SH_TLB_H */ diff --git a/arch/sh/include/asm/tlb_64.h b/arch/sh/include/asm/tlb_64.h new file mode 100644 index 00000000000..0a96f3af69e --- /dev/null +++ b/arch/sh/include/asm/tlb_64.h @@ -0,0 +1,77 @@ +/* + * include/asm-sh/tlb_64.h + * + * Copyright (C) 2003 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#ifndef __ASM_SH_TLB_64_H +#define __ASM_SH_TLB_64_H + +/* ITLB defines */ +#define ITLB_FIXED 0x00000000 /* First fixed ITLB, see head.S */ +#define ITLB_LAST_VAR_UNRESTRICTED 0x000003F0 /* Last ITLB */ + +/* DTLB defines */ +#define DTLB_FIXED 0x00800000 /* First fixed DTLB, see head.S */ +#define DTLB_LAST_VAR_UNRESTRICTED 0x008003F0 /* Last DTLB */ + +#ifndef __ASSEMBLY__ + +/** + * for_each_dtlb_entry + * + * @tlb: TLB entry + * + * Iterate over free (non-wired) DTLB entries + */ +#define for_each_dtlb_entry(tlb) \ + for (tlb = cpu_data->dtlb.first; \ + tlb <= cpu_data->dtlb.last; \ + tlb += cpu_data->dtlb.step) + +/** + * for_each_itlb_entry + * + * @tlb: TLB entry + * + * Iterate over free (non-wired) ITLB entries + */ +#define for_each_itlb_entry(tlb) \ + for (tlb = cpu_data->itlb.first; \ + tlb <= cpu_data->itlb.last; \ + tlb += cpu_data->itlb.step) + +/** + * __flush_tlb_slot + * + * @slot: Address of TLB slot. + * + * Flushes TLB slot @slot. + */ +static inline void __flush_tlb_slot(unsigned long long slot) +{ + __asm__ __volatile__ ("putcfg %0, 0, r63\n" : : "r" (slot)); +} + +#ifdef CONFIG_MMU +/* arch/sh64/mm/tlb.c */ +int sh64_tlb_init(void); +unsigned long long sh64_next_free_dtlb_entry(void); +unsigned long long sh64_get_wired_dtlb_entry(void); +int sh64_put_wired_dtlb_entry(unsigned long long entry); +void sh64_setup_tlb_slot(unsigned long long config_addr, unsigned long eaddr, + unsigned long asid, unsigned long paddr); +void sh64_teardown_tlb_slot(unsigned long long config_addr); +#else +#define sh64_tlb_init() do { } while (0) +#define sh64_next_free_dtlb_entry() (0) +#define sh64_get_wired_dtlb_entry() (0) +#define sh64_put_wired_dtlb_entry(entry) do { } while (0) +#define sh64_setup_tlb_slot(conf, virt, asid, phys) do { } while (0) +#define sh64_teardown_tlb_slot(addr) do { } while (0) +#endif /* CONFIG_MMU */ +#endif /* __ASSEMBLY__ */ +#endif /* __ASM_SH_TLB_64_H */ diff --git a/arch/sh/include/asm/tlbflush.h b/arch/sh/include/asm/tlbflush.h new file mode 100644 index 00000000000..e0ac97221ae --- /dev/null +++ b/arch/sh/include/asm/tlbflush.h @@ -0,0 +1,49 @@ +#ifndef __ASM_SH_TLBFLUSH_H +#define __ASM_SH_TLBFLUSH_H + +/* + * TLB flushing: + * + * - flush_tlb_all() flushes all processes TLBs + * - flush_tlb_mm(mm) flushes the specified mm context TLB's + * - flush_tlb_page(vma, vmaddr) flushes one page + * - flush_tlb_range(vma, start, end) flushes a range of pages + * - flush_tlb_kernel_range(start, end) flushes a range of kernel pages + */ +extern void local_flush_tlb_all(void); +extern void local_flush_tlb_mm(struct mm_struct *mm); +extern void local_flush_tlb_range(struct vm_area_struct *vma, + unsigned long start, + unsigned long end); +extern void local_flush_tlb_page(struct vm_area_struct *vma, + unsigned long page); +extern void local_flush_tlb_kernel_range(unsigned long start, + unsigned long end); +extern void local_flush_tlb_one(unsigned long asid, unsigned long page); + +#ifdef CONFIG_SMP + +extern void flush_tlb_all(void); +extern void flush_tlb_mm(struct mm_struct *mm); +extern void flush_tlb_range(struct vm_area_struct *vma, unsigned long start, + unsigned long end); +extern void flush_tlb_page(struct vm_area_struct *vma, unsigned long page); +extern void flush_tlb_kernel_range(unsigned long start, unsigned long end); +extern void flush_tlb_one(unsigned long asid, unsigned long page); + +#else + +#define flush_tlb_all() local_flush_tlb_all() +#define flush_tlb_mm(mm) local_flush_tlb_mm(mm) +#define flush_tlb_page(vma, page) local_flush_tlb_page(vma, page) +#define flush_tlb_one(asid, page) local_flush_tlb_one(asid, page) + +#define flush_tlb_range(vma, start, end) \ + local_flush_tlb_range(vma, start, end) + +#define flush_tlb_kernel_range(start, end) \ + local_flush_tlb_kernel_range(start, end) + +#endif /* CONFIG_SMP */ + +#endif /* __ASM_SH_TLBFLUSH_H */ diff --git a/arch/sh/include/asm/topology.h b/arch/sh/include/asm/topology.h new file mode 100644 index 00000000000..95f0085e098 --- /dev/null +++ b/arch/sh/include/asm/topology.h @@ -0,0 +1,47 @@ +#ifndef _ASM_SH_TOPOLOGY_H +#define _ASM_SH_TOPOLOGY_H + +#ifdef CONFIG_NUMA + +/* sched_domains SD_NODE_INIT for sh machines */ +#define SD_NODE_INIT (struct sched_domain) { \ + .span = CPU_MASK_NONE, \ + .parent = NULL, \ + .child = NULL, \ + .groups = NULL, \ + .min_interval = 8, \ + .max_interval = 32, \ + .busy_factor = 32, \ + .imbalance_pct = 125, \ + .cache_nice_tries = 2, \ + .busy_idx = 3, \ + .idle_idx = 2, \ + .newidle_idx = 2, \ + .wake_idx = 1, \ + .forkexec_idx = 1, \ + .flags = SD_LOAD_BALANCE \ + | SD_BALANCE_FORK \ + | SD_BALANCE_EXEC \ + | SD_SERIALIZE \ + | SD_WAKE_BALANCE, \ + .last_balance = jiffies, \ + .balance_interval = 1, \ + .nr_balance_failed = 0, \ +} + +#define cpu_to_node(cpu) ((void)(cpu),0) +#define parent_node(node) ((void)(node),0) + +#define node_to_cpumask(node) ((void)node, cpu_online_map) +#define node_to_first_cpu(node) ((void)(node),0) + +#define pcibus_to_node(bus) ((void)(bus), -1) +#define pcibus_to_cpumask(bus) (pcibus_to_node(bus) == -1 ? \ + CPU_MASK_ALL : \ + node_to_cpumask(pcibus_to_node(bus)) \ + ) +#endif + +#include + +#endif /* _ASM_SH_TOPOLOGY_H */ diff --git a/arch/sh/include/asm/types.h b/arch/sh/include/asm/types.h new file mode 100644 index 00000000000..beea4e6f8df --- /dev/null +++ b/arch/sh/include/asm/types.h @@ -0,0 +1,35 @@ +#ifndef __ASM_SH_TYPES_H +#define __ASM_SH_TYPES_H + +#include + +#ifndef __ASSEMBLY__ + +typedef unsigned short umode_t; + +#endif /* __ASSEMBLY__ */ + +/* + * These aren't exported outside the kernel to avoid name space clashes + */ +#ifdef __KERNEL__ + +#define BITS_PER_LONG 32 + +#ifndef __ASSEMBLY__ + +/* Dma addresses are 32-bits wide. */ + +typedef u32 dma_addr_t; + +#ifdef CONFIG_SUPERH32 +typedef u16 opcode_t; +#else +typedef u32 opcode_t; +#endif + +#endif /* __ASSEMBLY__ */ + +#endif /* __KERNEL__ */ + +#endif /* __ASM_SH_TYPES_H */ diff --git a/arch/sh/include/asm/uaccess.h b/arch/sh/include/asm/uaccess.h new file mode 100644 index 00000000000..45c2c9b2993 --- /dev/null +++ b/arch/sh/include/asm/uaccess.h @@ -0,0 +1,256 @@ +#ifndef __ASM_SH_UACCESS_H +#define __ASM_SH_UACCESS_H + +#include +#include +#include + +#define VERIFY_READ 0 +#define VERIFY_WRITE 1 + +#define __addr_ok(addr) \ + ((unsigned long __force)(addr) < current_thread_info()->addr_limit.seg) + +/* + * __access_ok: Check if address with size is OK or not. + * + * Uhhuh, this needs 33-bit arithmetic. We have a carry.. + * + * sum := addr + size; carry? --> flag = true; + * if (sum >= addr_limit) flag = true; + */ +#define __access_ok(addr, size) \ + (__addr_ok((addr) + (size))) +#define access_ok(type, addr, size) \ + (__chk_user_ptr(addr), \ + __access_ok((unsigned long __force)(addr), (size))) + +/* + * Uh, these should become the main single-value transfer routines ... + * They automatically use the right size if we just have the right + * pointer type ... + * + * As SuperH uses the same address space for kernel and user data, we + * can just do these as direct assignments. + * + * Careful to not + * (a) re-use the arguments for side effects (sizeof is ok) + * (b) require any knowledge of processes at this stage + */ +#define put_user(x,ptr) __put_user_check((x), (ptr), sizeof(*(ptr))) +#define get_user(x,ptr) __get_user_check((x), (ptr), sizeof(*(ptr))) + +/* + * The "__xxx" versions do not do address space checking, useful when + * doing multiple accesses to the same area (the user has to do the + * checks by hand with "access_ok()") + */ +#define __put_user(x,ptr) __put_user_nocheck((x), (ptr), sizeof(*(ptr))) +#define __get_user(x,ptr) __get_user_nocheck((x), (ptr), sizeof(*(ptr))) + +struct __large_struct { unsigned long buf[100]; }; +#define __m(x) (*(struct __large_struct __user *)(x)) + +#define __get_user_nocheck(x,ptr,size) \ +({ \ + long __gu_err; \ + unsigned long __gu_val; \ + const __typeof__(*(ptr)) __user *__gu_addr = (ptr); \ + __chk_user_ptr(ptr); \ + __get_user_size(__gu_val, __gu_addr, (size), __gu_err); \ + (x) = (__typeof__(*(ptr)))__gu_val; \ + __gu_err; \ +}) + +#define __get_user_check(x,ptr,size) \ +({ \ + long __gu_err = -EFAULT; \ + unsigned long __gu_val = 0; \ + const __typeof__(*(ptr)) *__gu_addr = (ptr); \ + if (likely(access_ok(VERIFY_READ, __gu_addr, (size)))) \ + __get_user_size(__gu_val, __gu_addr, (size), __gu_err); \ + (x) = (__typeof__(*(ptr)))__gu_val; \ + __gu_err; \ +}) + +#define __put_user_nocheck(x,ptr,size) \ +({ \ + long __pu_err; \ + __typeof__(*(ptr)) __user *__pu_addr = (ptr); \ + __chk_user_ptr(ptr); \ + __put_user_size((x), __pu_addr, (size), __pu_err); \ + __pu_err; \ +}) + +#define __put_user_check(x,ptr,size) \ +({ \ + long __pu_err = -EFAULT; \ + __typeof__(*(ptr)) __user *__pu_addr = (ptr); \ + if (likely(access_ok(VERIFY_WRITE, __pu_addr, size))) \ + __put_user_size((x), __pu_addr, (size), \ + __pu_err); \ + __pu_err; \ +}) + +#ifdef CONFIG_SUPERH32 +# include "uaccess_32.h" +#else +# include "uaccess_64.h" +#endif + +/* Generic arbitrary sized copy. */ +/* Return the number of bytes NOT copied */ +__kernel_size_t __copy_user(void *to, const void *from, __kernel_size_t n); + +static __always_inline unsigned long +__copy_from_user(void *to, const void __user *from, unsigned long n) +{ + return __copy_user(to, (__force void *)from, n); +} + +static __always_inline unsigned long __must_check +__copy_to_user(void __user *to, const void *from, unsigned long n) +{ + return __copy_user((__force void *)to, from, n); +} + +#define __copy_to_user_inatomic __copy_to_user +#define __copy_from_user_inatomic __copy_from_user + +/* + * Clear the area and return remaining number of bytes + * (on failure. Usually it's 0.) + */ +__kernel_size_t __clear_user(void *addr, __kernel_size_t size); + +#define clear_user(addr,n) \ +({ \ + void __user * __cl_addr = (addr); \ + unsigned long __cl_size = (n); \ + \ + if (__cl_size && access_ok(VERIFY_WRITE, \ + ((unsigned long)(__cl_addr)), __cl_size)) \ + __cl_size = __clear_user(__cl_addr, __cl_size); \ + \ + __cl_size; \ +}) + +/** + * strncpy_from_user: - Copy a NUL terminated string from userspace. + * @dst: Destination address, in kernel space. This buffer must be at + * least @count bytes long. + * @src: Source address, in user space. + * @count: Maximum number of bytes to copy, including the trailing NUL. + * + * Copies a NUL-terminated string from userspace to kernel space. + * + * On success, returns the length of the string (not including the trailing + * NUL). + * + * If access to userspace fails, returns -EFAULT (some data may have been + * copied). + * + * If @count is smaller than the length of the string, copies @count bytes + * and returns @count. + */ +#define strncpy_from_user(dest,src,count) \ +({ \ + unsigned long __sfu_src = (unsigned long)(src); \ + int __sfu_count = (int)(count); \ + long __sfu_res = -EFAULT; \ + \ + if (__access_ok(__sfu_src, __sfu_count)) \ + __sfu_res = __strncpy_from_user((unsigned long)(dest), \ + __sfu_src, __sfu_count); \ + \ + __sfu_res; \ +}) + +static inline unsigned long +copy_from_user(void *to, const void __user *from, unsigned long n) +{ + unsigned long __copy_from = (unsigned long) from; + __kernel_size_t __copy_size = (__kernel_size_t) n; + + if (__copy_size && __access_ok(__copy_from, __copy_size)) + return __copy_user(to, from, __copy_size); + + return __copy_size; +} + +static inline unsigned long +copy_to_user(void __user *to, const void *from, unsigned long n) +{ + unsigned long __copy_to = (unsigned long) to; + __kernel_size_t __copy_size = (__kernel_size_t) n; + + if (__copy_size && __access_ok(__copy_to, __copy_size)) + return __copy_user(to, from, __copy_size); + + return __copy_size; +} + +/** + * strnlen_user: - Get the size of a string in user space. + * @s: The string to measure. + * @n: The maximum valid length + * + * Context: User context only. This function may sleep. + * + * Get the size of a NUL-terminated string in user space. + * + * Returns the size of the string INCLUDING the terminating NUL. + * On exception, returns 0. + * If the string is too long, returns a value greater than @n. + */ +static inline long strnlen_user(const char __user *s, long n) +{ + if (!__addr_ok(s)) + return 0; + else + return __strnlen_user(s, n); +} + +/** + * strlen_user: - Get the size of a string in user space. + * @str: The string to measure. + * + * Context: User context only. This function may sleep. + * + * Get the size of a NUL-terminated string in user space. + * + * Returns the size of the string INCLUDING the terminating NUL. + * On exception, returns 0. + * + * If there is a limit on the length of a valid string, you may wish to + * consider using strnlen_user() instead. + */ +#define strlen_user(str) strnlen_user(str, ~0UL >> 1) + +/* + * The exception table consists of pairs of addresses: the first is the + * address of an instruction that is allowed to fault, and the second is + * the address at which the program should continue. No registers are + * modified, so it is entirely up to the continuation code to figure out + * what to do. + * + * All the routines below use bits of fixup code that are out of line + * with the main instruction path. This means when everything is well, + * we don't even have to jump over them. Further, they do not intrude + * on our cache or tlb entries. + */ +struct exception_table_entry { + unsigned long insn, fixup; +}; + +#if defined(CONFIG_SUPERH64) && defined(CONFIG_MMU) +#define ARCH_HAS_SEARCH_EXTABLE +#endif + +int fixup_exception(struct pt_regs *regs); +/* Returns 0 if exception not found and fixup.unit otherwise. */ +unsigned long search_exception_table(unsigned long addr); +const struct exception_table_entry *search_exception_tables(unsigned long addr); + + +#endif /* __ASM_SH_UACCESS_H */ diff --git a/arch/sh/include/asm/uaccess_32.h b/arch/sh/include/asm/uaccess_32.h new file mode 100644 index 00000000000..892fd6dea9d --- /dev/null +++ b/arch/sh/include/asm/uaccess_32.h @@ -0,0 +1,249 @@ +/* + * User space memory access functions + * + * Copyright (C) 1999, 2002 Niibe Yutaka + * Copyright (C) 2003 - 2008 Paul Mundt + * + * Based on: + * MIPS implementation version 1.15 by + * Copyright (C) 1996, 1997, 1998 by Ralf Baechle + * and i386 version. + */ +#ifndef __ASM_SH_UACCESS_32_H +#define __ASM_SH_UACCESS_32_H + +#define __get_user_size(x,ptr,size,retval) \ +do { \ + retval = 0; \ + switch (size) { \ + case 1: \ + __get_user_asm(x, ptr, retval, "b"); \ + break; \ + case 2: \ + __get_user_asm(x, ptr, retval, "w"); \ + break; \ + case 4: \ + __get_user_asm(x, ptr, retval, "l"); \ + break; \ + default: \ + __get_user_unknown(); \ + break; \ + } \ +} while (0) + +#ifdef CONFIG_MMU +#define __get_user_asm(x, addr, err, insn) \ +({ \ +__asm__ __volatile__( \ + "1:\n\t" \ + "mov." insn " %2, %1\n\t" \ + "2:\n" \ + ".section .fixup,\"ax\"\n" \ + "3:\n\t" \ + "mov #0, %1\n\t" \ + "mov.l 4f, %0\n\t" \ + "jmp @%0\n\t" \ + " mov %3, %0\n\t" \ + ".balign 4\n" \ + "4: .long 2b\n\t" \ + ".previous\n" \ + ".section __ex_table,\"a\"\n\t" \ + ".long 1b, 3b\n\t" \ + ".previous" \ + :"=&r" (err), "=&r" (x) \ + :"m" (__m(addr)), "i" (-EFAULT), "0" (err)); }) +#else +#define __get_user_asm(x, addr, err, insn) \ +do { \ + __asm__ __volatile__ ( \ + "mov." insn " %1, %0\n\t" \ + : "=&r" (x) \ + : "m" (__m(addr)) \ + ); \ +} while (0) +#endif /* CONFIG_MMU */ + +extern void __get_user_unknown(void); + +#define __put_user_size(x,ptr,size,retval) \ +do { \ + retval = 0; \ + switch (size) { \ + case 1: \ + __put_user_asm(x, ptr, retval, "b"); \ + break; \ + case 2: \ + __put_user_asm(x, ptr, retval, "w"); \ + break; \ + case 4: \ + __put_user_asm((u32)x, ptr, \ + retval, "l"); \ + break; \ + case 8: \ + __put_user_u64(x, ptr, retval); \ + break; \ + default: \ + __put_user_unknown(); \ + } \ +} while (0) + +#ifdef CONFIG_MMU +#define __put_user_asm(x, addr, err, insn) \ +do { \ + __asm__ __volatile__ ( \ + "1:\n\t" \ + "mov." insn " %1, %2\n\t" \ + "2:\n" \ + ".section .fixup,\"ax\"\n" \ + "3:\n\t" \ + "mov.l 4f, %0\n\t" \ + "jmp @%0\n\t" \ + " mov %3, %0\n\t" \ + ".balign 4\n" \ + "4: .long 2b\n\t" \ + ".previous\n" \ + ".section __ex_table,\"a\"\n\t" \ + ".long 1b, 3b\n\t" \ + ".previous" \ + : "=&r" (err) \ + : "r" (x), "m" (__m(addr)), "i" (-EFAULT), \ + "0" (err) \ + : "memory" \ + ); \ +} while (0) +#else +#define __put_user_asm(x, addr, err, insn) \ +do { \ + __asm__ __volatile__ ( \ + "mov." insn " %0, %1\n\t" \ + : /* no outputs */ \ + : "r" (x), "m" (__m(addr)) \ + : "memory" \ + ); \ +} while (0) +#endif /* CONFIG_MMU */ + +#if defined(CONFIG_CPU_LITTLE_ENDIAN) +#define __put_user_u64(val,addr,retval) \ +({ \ +__asm__ __volatile__( \ + "1:\n\t" \ + "mov.l %R1,%2\n\t" \ + "mov.l %S1,%T2\n\t" \ + "2:\n" \ + ".section .fixup,\"ax\"\n" \ + "3:\n\t" \ + "mov.l 4f,%0\n\t" \ + "jmp @%0\n\t" \ + " mov %3,%0\n\t" \ + ".balign 4\n" \ + "4: .long 2b\n\t" \ + ".previous\n" \ + ".section __ex_table,\"a\"\n\t" \ + ".long 1b, 3b\n\t" \ + ".previous" \ + : "=r" (retval) \ + : "r" (val), "m" (__m(addr)), "i" (-EFAULT), "0" (retval) \ + : "memory"); }) +#else +#define __put_user_u64(val,addr,retval) \ +({ \ +__asm__ __volatile__( \ + "1:\n\t" \ + "mov.l %S1,%2\n\t" \ + "mov.l %R1,%T2\n\t" \ + "2:\n" \ + ".section .fixup,\"ax\"\n" \ + "3:\n\t" \ + "mov.l 4f,%0\n\t" \ + "jmp @%0\n\t" \ + " mov %3,%0\n\t" \ + ".balign 4\n" \ + "4: .long 2b\n\t" \ + ".previous\n" \ + ".section __ex_table,\"a\"\n\t" \ + ".long 1b, 3b\n\t" \ + ".previous" \ + : "=r" (retval) \ + : "r" (val), "m" (__m(addr)), "i" (-EFAULT), "0" (retval) \ + : "memory"); }) +#endif + +extern void __put_user_unknown(void); + +static inline int +__strncpy_from_user(unsigned long __dest, unsigned long __user __src, int __count) +{ + __kernel_size_t res; + unsigned long __dummy, _d, _s, _c; + + __asm__ __volatile__( + "9:\n" + "mov.b @%2+, %1\n\t" + "cmp/eq #0, %1\n\t" + "bt/s 2f\n" + "1:\n" + "mov.b %1, @%3\n\t" + "dt %4\n\t" + "bf/s 9b\n\t" + " add #1, %3\n\t" + "2:\n\t" + "sub %4, %0\n" + "3:\n" + ".section .fixup,\"ax\"\n" + "4:\n\t" + "mov.l 5f, %1\n\t" + "jmp @%1\n\t" + " mov %9, %0\n\t" + ".balign 4\n" + "5: .long 3b\n" + ".previous\n" + ".section __ex_table,\"a\"\n" + " .balign 4\n" + " .long 9b,4b\n" + ".previous" + : "=r" (res), "=&z" (__dummy), "=r" (_s), "=r" (_d), "=r"(_c) + : "0" (__count), "2" (__src), "3" (__dest), "4" (__count), + "i" (-EFAULT) + : "memory", "t"); + + return res; +} + +/* + * Return the size of a string (including the ending 0 even when we have + * exceeded the maximum string length). + */ +static inline long __strnlen_user(const char __user *__s, long __n) +{ + unsigned long res; + unsigned long __dummy; + + __asm__ __volatile__( + "1:\t" + "mov.b @(%0,%3), %1\n\t" + "cmp/eq %4, %0\n\t" + "bt/s 2f\n\t" + " add #1, %0\n\t" + "tst %1, %1\n\t" + "bf 1b\n\t" + "2:\n" + ".section .fixup,\"ax\"\n" + "3:\n\t" + "mov.l 4f, %1\n\t" + "jmp @%1\n\t" + " mov #0, %0\n" + ".balign 4\n" + "4: .long 2b\n" + ".previous\n" + ".section __ex_table,\"a\"\n" + " .balign 4\n" + " .long 1b,3b\n" + ".previous" + : "=z" (res), "=&r" (__dummy) + : "0" (0), "r" (__s), "r" (__n) + : "t"); + return res; +} + +#endif /* __ASM_SH_UACCESS_32_H */ diff --git a/arch/sh/include/asm/uaccess_64.h b/arch/sh/include/asm/uaccess_64.h new file mode 100644 index 00000000000..81b3d515fcb --- /dev/null +++ b/arch/sh/include/asm/uaccess_64.h @@ -0,0 +1,79 @@ +#ifndef __ASM_SH_UACCESS_64_H +#define __ASM_SH_UACCESS_64_H + +/* + * include/asm-sh/uaccess_64.h + * + * Copyright (C) 2000, 2001 Paolo Alberelli + * Copyright (C) 2003, 2004 Paul Mundt + * + * User space memory access functions + * + * Copyright (C) 1999 Niibe Yutaka + * + * Based on: + * MIPS implementation version 1.15 by + * Copyright (C) 1996, 1997, 1998 by Ralf Baechle + * and i386 version. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#define __get_user_size(x,ptr,size,retval) \ +do { \ + retval = 0; \ + switch (size) { \ + case 1: \ + retval = __get_user_asm_b(x, ptr); \ + break; \ + case 2: \ + retval = __get_user_asm_w(x, ptr); \ + break; \ + case 4: \ + retval = __get_user_asm_l(x, ptr); \ + break; \ + case 8: \ + retval = __get_user_asm_q(x, ptr); \ + break; \ + default: \ + __get_user_unknown(); \ + break; \ + } \ +} while (0) + +extern long __get_user_asm_b(void *, long); +extern long __get_user_asm_w(void *, long); +extern long __get_user_asm_l(void *, long); +extern long __get_user_asm_q(void *, long); +extern void __get_user_unknown(void); + +#define __put_user_size(x,ptr,size,retval) \ +do { \ + retval = 0; \ + switch (size) { \ + case 1: \ + retval = __put_user_asm_b(x, ptr); \ + break; \ + case 2: \ + retval = __put_user_asm_w(x, ptr); \ + break; \ + case 4: \ + retval = __put_user_asm_l(x, ptr); \ + break; \ + case 8: \ + retval = __put_user_asm_q(x, ptr); \ + break; \ + default: \ + __put_user_unknown(); \ + } \ +} while (0) + +extern long __put_user_asm_b(void *, long); +extern long __put_user_asm_w(void *, long); +extern long __put_user_asm_l(void *, long); +extern long __put_user_asm_q(void *, long); +extern void __put_user_unknown(void); + +#endif /* __ASM_SH_UACCESS_64_H */ diff --git a/arch/sh/include/asm/ubc.h b/arch/sh/include/asm/ubc.h new file mode 100644 index 00000000000..a7b9028bbfb --- /dev/null +++ b/arch/sh/include/asm/ubc.h @@ -0,0 +1,64 @@ +/* + * include/asm-sh/ubc.h + * + * Copyright (C) 1999 Niibe Yutaka + * Copyright (C) 2002, 2003 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#ifndef __ASM_SH_UBC_H +#define __ASM_SH_UBC_H +#ifdef __KERNEL__ + +#include + +/* User Break Controller */ +#if defined(CONFIG_CPU_SUBTYPE_SH7707) || defined(CONFIG_CPU_SUBTYPE_SH7709) +#define UBC_TYPE_SH7729 (current_cpu_data.type == CPU_SH7729) +#else +#define UBC_TYPE_SH7729 0 +#endif + +#define BAMR_ASID (1 << 2) +#define BAMR_NONE 0 +#define BAMR_10 0x1 +#define BAMR_12 0x2 +#define BAMR_ALL 0x3 +#define BAMR_16 0x8 +#define BAMR_20 0x9 + +#define BBR_INST (1 << 4) +#define BBR_DATA (2 << 4) +#define BBR_READ (1 << 2) +#define BBR_WRITE (2 << 2) +#define BBR_BYTE 0x1 +#define BBR_HALF 0x2 +#define BBR_LONG 0x3 +#define BBR_QUAD (1 << 6) /* SH7750 */ +#define BBR_CPU (1 << 6) /* SH7709A,SH7729 */ +#define BBR_DMA (2 << 6) /* SH7709A,SH7729 */ + +#define BRCR_CMFA (1 << 15) +#define BRCR_CMFB (1 << 14) +#define BRCR_PCTE (1 << 11) +#define BRCR_PCBA (1 << 10) /* 1: after execution */ +#define BRCR_DBEB (1 << 7) +#define BRCR_PCBB (1 << 6) +#define BRCR_SEQ (1 << 3) +#define BRCR_UBDE (1 << 0) + +#ifndef __ASSEMBLY__ +/* arch/sh/kernel/cpu/ubc.S */ +extern void ubc_sleep(void); + +#ifdef CONFIG_UBC_WAKEUP +extern void ubc_wakeup(void); +#else +#define ubc_wakeup() do { } while (0) +#endif +#endif + +#endif /* __KERNEL__ */ +#endif /* __ASM_SH_UBC_H */ diff --git a/arch/sh/include/asm/ucontext.h b/arch/sh/include/asm/ucontext.h new file mode 100644 index 00000000000..202ef1d5a3c --- /dev/null +++ b/arch/sh/include/asm/ucontext.h @@ -0,0 +1,12 @@ +#ifndef __ASM_SH_UCONTEXT_H +#define __ASM_SH_UCONTEXT_H + +struct ucontext { + unsigned long uc_flags; + struct ucontext *uc_link; + stack_t uc_stack; + struct sigcontext uc_mcontext; + sigset_t uc_sigmask; /* mask last for extensibility */ +}; + +#endif /* __ASM_SH_UCONTEXT_H */ diff --git a/arch/sh/include/asm/unaligned.h b/arch/sh/include/asm/unaligned.h new file mode 100644 index 00000000000..c1641a01d50 --- /dev/null +++ b/arch/sh/include/asm/unaligned.h @@ -0,0 +1,19 @@ +#ifndef _ASM_SH_UNALIGNED_H +#define _ASM_SH_UNALIGNED_H + +/* SH can't handle unaligned accesses. */ +#ifdef __LITTLE_ENDIAN__ +# include +# include +# include +# define get_unaligned __get_unaligned_le +# define put_unaligned __put_unaligned_le +#else +# include +# include +# include +# define get_unaligned __get_unaligned_be +# define put_unaligned __put_unaligned_be +#endif + +#endif /* _ASM_SH_UNALIGNED_H */ diff --git a/arch/sh/include/asm/unistd.h b/arch/sh/include/asm/unistd.h new file mode 100644 index 00000000000..65be656ead7 --- /dev/null +++ b/arch/sh/include/asm/unistd.h @@ -0,0 +1,13 @@ +#ifdef __KERNEL__ +# ifdef CONFIG_SUPERH32 +# include "unistd_32.h" +# else +# include "unistd_64.h" +# endif +#else +# ifdef __SH5__ +# include "unistd_64.h" +# else +# include "unistd_32.h" +# endif +#endif diff --git a/arch/sh/include/asm/unistd_32.h b/arch/sh/include/asm/unistd_32.h new file mode 100644 index 00000000000..d52c000cf92 --- /dev/null +++ b/arch/sh/include/asm/unistd_32.h @@ -0,0 +1,384 @@ +#ifndef __ASM_SH_UNISTD_H +#define __ASM_SH_UNISTD_H + +/* + * Copyright (C) 1999 Niibe Yutaka + */ + +/* + * This file contains the system call numbers. + */ + +#define __NR_restart_syscall 0 +#define __NR_exit 1 +#define __NR_fork 2 +#define __NR_read 3 +#define __NR_write 4 +#define __NR_open 5 +#define __NR_close 6 +#define __NR_waitpid 7 +#define __NR_creat 8 +#define __NR_link 9 +#define __NR_unlink 10 +#define __NR_execve 11 +#define __NR_chdir 12 +#define __NR_time 13 +#define __NR_mknod 14 +#define __NR_chmod 15 +#define __NR_lchown 16 +#define __NR_break 17 +#define __NR_oldstat 18 +#define __NR_lseek 19 +#define __NR_getpid 20 +#define __NR_mount 21 +#define __NR_umount 22 +#define __NR_setuid 23 +#define __NR_getuid 24 +#define __NR_stime 25 +#define __NR_ptrace 26 +#define __NR_alarm 27 +#define __NR_oldfstat 28 +#define __NR_pause 29 +#define __NR_utime 30 +#define __NR_stty 31 +#define __NR_gtty 32 +#define __NR_access 33 +#define __NR_nice 34 +#define __NR_ftime 35 +#define __NR_sync 36 +#define __NR_kill 37 +#define __NR_rename 38 +#define __NR_mkdir 39 +#define __NR_rmdir 40 +#define __NR_dup 41 +#define __NR_pipe 42 +#define __NR_times 43 +#define __NR_prof 44 +#define __NR_brk 45 +#define __NR_setgid 46 +#define __NR_getgid 47 +#define __NR_signal 48 +#define __NR_geteuid 49 +#define __NR_getegid 50 +#define __NR_acct 51 +#define __NR_umount2 52 +#define __NR_lock 53 +#define __NR_ioctl 54 +#define __NR_fcntl 55 +#define __NR_mpx 56 +#define __NR_setpgid 57 +#define __NR_ulimit 58 +#define __NR_oldolduname 59 +#define __NR_umask 60 +#define __NR_chroot 61 +#define __NR_ustat 62 +#define __NR_dup2 63 +#define __NR_getppid 64 +#define __NR_getpgrp 65 +#define __NR_setsid 66 +#define __NR_sigaction 67 +#define __NR_sgetmask 68 +#define __NR_ssetmask 69 +#define __NR_setreuid 70 +#define __NR_setregid 71 +#define __NR_sigsuspend 72 +#define __NR_sigpending 73 +#define __NR_sethostname 74 +#define __NR_setrlimit 75 +#define __NR_getrlimit 76 /* Back compatible 2Gig limited rlimit */ +#define __NR_getrusage 77 +#define __NR_gettimeofday 78 +#define __NR_settimeofday 79 +#define __NR_getgroups 80 +#define __NR_setgroups 81 +#define __NR_select 82 +#define __NR_symlink 83 +#define __NR_oldlstat 84 +#define __NR_readlink 85 +#define __NR_uselib 86 +#define __NR_swapon 87 +#define __NR_reboot 88 +#define __NR_readdir 89 +#define __NR_mmap 90 +#define __NR_munmap 91 +#define __NR_truncate 92 +#define __NR_ftruncate 93 +#define __NR_fchmod 94 +#define __NR_fchown 95 +#define __NR_getpriority 96 +#define __NR_setpriority 97 +#define __NR_profil 98 +#define __NR_statfs 99 +#define __NR_fstatfs 100 +#define __NR_ioperm 101 +#define __NR_socketcall 102 +#define __NR_syslog 103 +#define __NR_setitimer 104 +#define __NR_getitimer 105 +#define __NR_stat 106 +#define __NR_lstat 107 +#define __NR_fstat 108 +#define __NR_olduname 109 +#define __NR_iopl 110 +#define __NR_vhangup 111 +#define __NR_idle 112 +#define __NR_vm86old 113 +#define __NR_wait4 114 +#define __NR_swapoff 115 +#define __NR_sysinfo 116 +#define __NR_ipc 117 +#define __NR_fsync 118 +#define __NR_sigreturn 119 +#define __NR_clone 120 +#define __NR_setdomainname 121 +#define __NR_uname 122 +#define __NR_modify_ldt 123 +#define __NR_adjtimex 124 +#define __NR_mprotect 125 +#define __NR_sigprocmask 126 +#define __NR_create_module 127 +#define __NR_init_module 128 +#define __NR_delete_module 129 +#define __NR_get_kernel_syms 130 +#define __NR_quotactl 131 +#define __NR_getpgid 132 +#define __NR_fchdir 133 +#define __NR_bdflush 134 +#define __NR_sysfs 135 +#define __NR_personality 136 +#define __NR_afs_syscall 137 /* Syscall for Andrew File System */ +#define __NR_setfsuid 138 +#define __NR_setfsgid 139 +#define __NR__llseek 140 +#define __NR_getdents 141 +#define __NR__newselect 142 +#define __NR_flock 143 +#define __NR_msync 144 +#define __NR_readv 145 +#define __NR_writev 146 +#define __NR_getsid 147 +#define __NR_fdatasync 148 +#define __NR__sysctl 149 +#define __NR_mlock 150 +#define __NR_munlock 151 +#define __NR_mlockall 152 +#define __NR_munlockall 153 +#define __NR_sched_setparam 154 +#define __NR_sched_getparam 155 +#define __NR_sched_setscheduler 156 +#define __NR_sched_getscheduler 157 +#define __NR_sched_yield 158 +#define __NR_sched_get_priority_max 159 +#define __NR_sched_get_priority_min 160 +#define __NR_sched_rr_get_interval 161 +#define __NR_nanosleep 162 +#define __NR_mremap 163 +#define __NR_setresuid 164 +#define __NR_getresuid 165 +#define __NR_vm86 166 +#define __NR_query_module 167 +#define __NR_poll 168 +#define __NR_nfsservctl 169 +#define __NR_setresgid 170 +#define __NR_getresgid 171 +#define __NR_prctl 172 +#define __NR_rt_sigreturn 173 +#define __NR_rt_sigaction 174 +#define __NR_rt_sigprocmask 175 +#define __NR_rt_sigpending 176 +#define __NR_rt_sigtimedwait 177 +#define __NR_rt_sigqueueinfo 178 +#define __NR_rt_sigsuspend 179 +#define __NR_pread64 180 +#define __NR_pwrite64 181 +#define __NR_chown 182 +#define __NR_getcwd 183 +#define __NR_capget 184 +#define __NR_capset 185 +#define __NR_sigaltstack 186 +#define __NR_sendfile 187 +#define __NR_streams1 188 /* some people actually want it */ +#define __NR_streams2 189 /* some people actually want it */ +#define __NR_vfork 190 +#define __NR_ugetrlimit 191 /* SuS compliant getrlimit */ +#define __NR_mmap2 192 +#define __NR_truncate64 193 +#define __NR_ftruncate64 194 +#define __NR_stat64 195 +#define __NR_lstat64 196 +#define __NR_fstat64 197 +#define __NR_lchown32 198 +#define __NR_getuid32 199 +#define __NR_getgid32 200 +#define __NR_geteuid32 201 +#define __NR_getegid32 202 +#define __NR_setreuid32 203 +#define __NR_setregid32 204 +#define __NR_getgroups32 205 +#define __NR_setgroups32 206 +#define __NR_fchown32 207 +#define __NR_setresuid32 208 +#define __NR_getresuid32 209 +#define __NR_setresgid32 210 +#define __NR_getresgid32 211 +#define __NR_chown32 212 +#define __NR_setuid32 213 +#define __NR_setgid32 214 +#define __NR_setfsuid32 215 +#define __NR_setfsgid32 216 +#define __NR_pivot_root 217 +#define __NR_mincore 218 +#define __NR_madvise 219 +#define __NR_getdents64 220 +#define __NR_fcntl64 221 +/* 223 is unused */ +#define __NR_gettid 224 +#define __NR_readahead 225 +#define __NR_setxattr 226 +#define __NR_lsetxattr 227 +#define __NR_fsetxattr 228 +#define __NR_getxattr 229 +#define __NR_lgetxattr 230 +#define __NR_fgetxattr 231 +#define __NR_listxattr 232 +#define __NR_llistxattr 233 +#define __NR_flistxattr 234 +#define __NR_removexattr 235 +#define __NR_lremovexattr 236 +#define __NR_fremovexattr 237 +#define __NR_tkill 238 +#define __NR_sendfile64 239 +#define __NR_futex 240 +#define __NR_sched_setaffinity 241 +#define __NR_sched_getaffinity 242 +#define __NR_set_thread_area 243 +#define __NR_get_thread_area 244 +#define __NR_io_setup 245 +#define __NR_io_destroy 246 +#define __NR_io_getevents 247 +#define __NR_io_submit 248 +#define __NR_io_cancel 249 +#define __NR_fadvise64 250 + +#define __NR_exit_group 252 +#define __NR_lookup_dcookie 253 +#define __NR_epoll_create 254 +#define __NR_epoll_ctl 255 +#define __NR_epoll_wait 256 +#define __NR_remap_file_pages 257 +#define __NR_set_tid_address 258 +#define __NR_timer_create 259 +#define __NR_timer_settime (__NR_timer_create+1) +#define __NR_timer_gettime (__NR_timer_create+2) +#define __NR_timer_getoverrun (__NR_timer_create+3) +#define __NR_timer_delete (__NR_timer_create+4) +#define __NR_clock_settime (__NR_timer_create+5) +#define __NR_clock_gettime (__NR_timer_create+6) +#define __NR_clock_getres (__NR_timer_create+7) +#define __NR_clock_nanosleep (__NR_timer_create+8) +#define __NR_statfs64 268 +#define __NR_fstatfs64 269 +#define __NR_tgkill 270 +#define __NR_utimes 271 +#define __NR_fadvise64_64 272 +#define __NR_vserver 273 +#define __NR_mbind 274 +#define __NR_get_mempolicy 275 +#define __NR_set_mempolicy 276 +#define __NR_mq_open 277 +#define __NR_mq_unlink (__NR_mq_open+1) +#define __NR_mq_timedsend (__NR_mq_open+2) +#define __NR_mq_timedreceive (__NR_mq_open+3) +#define __NR_mq_notify (__NR_mq_open+4) +#define __NR_mq_getsetattr (__NR_mq_open+5) +#define __NR_kexec_load 283 +#define __NR_waitid 284 +#define __NR_add_key 285 +#define __NR_request_key 286 +#define __NR_keyctl 287 +#define __NR_ioprio_set 288 +#define __NR_ioprio_get 289 +#define __NR_inotify_init 290 +#define __NR_inotify_add_watch 291 +#define __NR_inotify_rm_watch 292 +/* 293 is unused */ +#define __NR_migrate_pages 294 +#define __NR_openat 295 +#define __NR_mkdirat 296 +#define __NR_mknodat 297 +#define __NR_fchownat 298 +#define __NR_futimesat 299 +#define __NR_fstatat64 300 +#define __NR_unlinkat 301 +#define __NR_renameat 302 +#define __NR_linkat 303 +#define __NR_symlinkat 304 +#define __NR_readlinkat 305 +#define __NR_fchmodat 306 +#define __NR_faccessat 307 +#define __NR_pselect6 308 +#define __NR_ppoll 309 +#define __NR_unshare 310 +#define __NR_set_robust_list 311 +#define __NR_get_robust_list 312 +#define __NR_splice 313 +#define __NR_sync_file_range 314 +#define __NR_tee 315 +#define __NR_vmsplice 316 +#define __NR_move_pages 317 +#define __NR_getcpu 318 +#define __NR_epoll_pwait 319 +#define __NR_utimensat 320 +#define __NR_signalfd 321 +#define __NR_timerfd_create 322 +#define __NR_eventfd 323 +#define __NR_fallocate 324 +#define __NR_timerfd_settime 325 +#define __NR_timerfd_gettime 326 +#define __NR_signalfd4 327 +#define __NR_eventfd2 328 +#define __NR_epoll_create1 329 +#define __NR_dup3 330 +#define __NR_pipe2 331 +#define __NR_inotify_init1 332 + +#define NR_syscalls 333 + +#ifdef __KERNEL__ + +#define __ARCH_WANT_IPC_PARSE_VERSION +#define __ARCH_WANT_OLD_READDIR +#define __ARCH_WANT_OLD_STAT +#define __ARCH_WANT_STAT64 +#define __ARCH_WANT_SYS_ALARM +#define __ARCH_WANT_SYS_GETHOSTNAME +#define __ARCH_WANT_SYS_PAUSE +#define __ARCH_WANT_SYS_SGETMASK +#define __ARCH_WANT_SYS_SIGNAL +#define __ARCH_WANT_SYS_TIME +#define __ARCH_WANT_SYS_UTIME +#define __ARCH_WANT_SYS_WAITPID +#define __ARCH_WANT_SYS_SOCKETCALL +#define __ARCH_WANT_SYS_FADVISE64 +#define __ARCH_WANT_SYS_GETPGRP +#define __ARCH_WANT_SYS_LLSEEK +#define __ARCH_WANT_SYS_NICE +#define __ARCH_WANT_SYS_OLD_GETRLIMIT +#define __ARCH_WANT_SYS_OLDUMOUNT +#define __ARCH_WANT_SYS_SIGPENDING +#define __ARCH_WANT_SYS_SIGPROCMASK +#define __ARCH_WANT_SYS_RT_SIGACTION +#define __ARCH_WANT_SYS_RT_SIGSUSPEND + +/* + * "Conditional" syscalls + * + * What we want is __attribute__((weak,alias("sys_ni_syscall"))), + * but it doesn't work on all toolchains, so we just do it by hand + */ +#ifndef cond_syscall +#define cond_syscall(x) asm(".weak\t" #x "\n\t.set\t" #x ",sys_ni_syscall") +#endif + +#endif /* __KERNEL__ */ +#endif /* __ASM_SH_UNISTD_H */ diff --git a/arch/sh/include/asm/unistd_64.h b/arch/sh/include/asm/unistd_64.h new file mode 100644 index 00000000000..7c54e91753c --- /dev/null +++ b/arch/sh/include/asm/unistd_64.h @@ -0,0 +1,423 @@ +#ifndef __ASM_SH_UNISTD_64_H +#define __ASM_SH_UNISTD_64_H + +/* + * include/asm-sh/unistd_64.h + * + * This file contains the system call numbers. + * + * Copyright (C) 2000, 2001 Paolo Alberelli + * Copyright (C) 2003 - 2007 Paul Mundt + * Copyright (C) 2004 Sean McGoogan + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#define __NR_restart_syscall 0 +#define __NR_exit 1 +#define __NR_fork 2 +#define __NR_read 3 +#define __NR_write 4 +#define __NR_open 5 +#define __NR_close 6 +#define __NR_waitpid 7 +#define __NR_creat 8 +#define __NR_link 9 +#define __NR_unlink 10 +#define __NR_execve 11 +#define __NR_chdir 12 +#define __NR_time 13 +#define __NR_mknod 14 +#define __NR_chmod 15 +#define __NR_lchown 16 +#define __NR_break 17 +#define __NR_oldstat 18 +#define __NR_lseek 19 +#define __NR_getpid 20 +#define __NR_mount 21 +#define __NR_umount 22 +#define __NR_setuid 23 +#define __NR_getuid 24 +#define __NR_stime 25 +#define __NR_ptrace 26 +#define __NR_alarm 27 +#define __NR_oldfstat 28 +#define __NR_pause 29 +#define __NR_utime 30 +#define __NR_stty 31 +#define __NR_gtty 32 +#define __NR_access 33 +#define __NR_nice 34 +#define __NR_ftime 35 +#define __NR_sync 36 +#define __NR_kill 37 +#define __NR_rename 38 +#define __NR_mkdir 39 +#define __NR_rmdir 40 +#define __NR_dup 41 +#define __NR_pipe 42 +#define __NR_times 43 +#define __NR_prof 44 +#define __NR_brk 45 +#define __NR_setgid 46 +#define __NR_getgid 47 +#define __NR_signal 48 +#define __NR_geteuid 49 +#define __NR_getegid 50 +#define __NR_acct 51 +#define __NR_umount2 52 +#define __NR_lock 53 +#define __NR_ioctl 54 +#define __NR_fcntl 55 +#define __NR_mpx 56 +#define __NR_setpgid 57 +#define __NR_ulimit 58 +#define __NR_oldolduname 59 +#define __NR_umask 60 +#define __NR_chroot 61 +#define __NR_ustat 62 +#define __NR_dup2 63 +#define __NR_getppid 64 +#define __NR_getpgrp 65 +#define __NR_setsid 66 +#define __NR_sigaction 67 +#define __NR_sgetmask 68 +#define __NR_ssetmask 69 +#define __NR_setreuid 70 +#define __NR_setregid 71 +#define __NR_sigsuspend 72 +#define __NR_sigpending 73 +#define __NR_sethostname 74 +#define __NR_setrlimit 75 +#define __NR_getrlimit 76 /* Back compatible 2Gig limited rlimit */ +#define __NR_getrusage 77 +#define __NR_gettimeofday 78 +#define __NR_settimeofday 79 +#define __NR_getgroups 80 +#define __NR_setgroups 81 +#define __NR_select 82 +#define __NR_symlink 83 +#define __NR_oldlstat 84 +#define __NR_readlink 85 +#define __NR_uselib 86 +#define __NR_swapon 87 +#define __NR_reboot 88 +#define __NR_readdir 89 +#define __NR_mmap 90 +#define __NR_munmap 91 +#define __NR_truncate 92 +#define __NR_ftruncate 93 +#define __NR_fchmod 94 +#define __NR_fchown 95 +#define __NR_getpriority 96 +#define __NR_setpriority 97 +#define __NR_profil 98 +#define __NR_statfs 99 +#define __NR_fstatfs 100 +#define __NR_ioperm 101 +#define __NR_socketcall 102 /* old implementation of socket systemcall */ +#define __NR_syslog 103 +#define __NR_setitimer 104 +#define __NR_getitimer 105 +#define __NR_stat 106 +#define __NR_lstat 107 +#define __NR_fstat 108 +#define __NR_olduname 109 +#define __NR_iopl 110 +#define __NR_vhangup 111 +#define __NR_idle 112 +#define __NR_vm86old 113 +#define __NR_wait4 114 +#define __NR_swapoff 115 +#define __NR_sysinfo 116 +#define __NR_ipc 117 +#define __NR_fsync 118 +#define __NR_sigreturn 119 +#define __NR_clone 120 +#define __NR_setdomainname 121 +#define __NR_uname 122 +#define __NR_modify_ldt 123 +#define __NR_adjtimex 124 +#define __NR_mprotect 125 +#define __NR_sigprocmask 126 +#define __NR_create_module 127 +#define __NR_init_module 128 +#define __NR_delete_module 129 +#define __NR_get_kernel_syms 130 +#define __NR_quotactl 131 +#define __NR_getpgid 132 +#define __NR_fchdir 133 +#define __NR_bdflush 134 +#define __NR_sysfs 135 +#define __NR_personality 136 +#define __NR_afs_syscall 137 /* Syscall for Andrew File System */ +#define __NR_setfsuid 138 +#define __NR_setfsgid 139 +#define __NR__llseek 140 +#define __NR_getdents 141 +#define __NR__newselect 142 +#define __NR_flock 143 +#define __NR_msync 144 +#define __NR_readv 145 +#define __NR_writev 146 +#define __NR_getsid 147 +#define __NR_fdatasync 148 +#define __NR__sysctl 149 +#define __NR_mlock 150 +#define __NR_munlock 151 +#define __NR_mlockall 152 +#define __NR_munlockall 153 +#define __NR_sched_setparam 154 +#define __NR_sched_getparam 155 +#define __NR_sched_setscheduler 156 +#define __NR_sched_getscheduler 157 +#define __NR_sched_yield 158 +#define __NR_sched_get_priority_max 159 +#define __NR_sched_get_priority_min 160 +#define __NR_sched_rr_get_interval 161 +#define __NR_nanosleep 162 +#define __NR_mremap 163 +#define __NR_setresuid 164 +#define __NR_getresuid 165 +#define __NR_vm86 166 +#define __NR_query_module 167 +#define __NR_poll 168 +#define __NR_nfsservctl 169 +#define __NR_setresgid 170 +#define __NR_getresgid 171 +#define __NR_prctl 172 +#define __NR_rt_sigreturn 173 +#define __NR_rt_sigaction 174 +#define __NR_rt_sigprocmask 175 +#define __NR_rt_sigpending 176 +#define __NR_rt_sigtimedwait 177 +#define __NR_rt_sigqueueinfo 178 +#define __NR_rt_sigsuspend 179 +#define __NR_pread64 180 +#define __NR_pwrite64 181 +#define __NR_chown 182 +#define __NR_getcwd 183 +#define __NR_capget 184 +#define __NR_capset 185 +#define __NR_sigaltstack 186 +#define __NR_sendfile 187 +#define __NR_streams1 188 /* some people actually want it */ +#define __NR_streams2 189 /* some people actually want it */ +#define __NR_vfork 190 +#define __NR_ugetrlimit 191 /* SuS compliant getrlimit */ +#define __NR_mmap2 192 +#define __NR_truncate64 193 +#define __NR_ftruncate64 194 +#define __NR_stat64 195 +#define __NR_lstat64 196 +#define __NR_fstat64 197 +#define __NR_lchown32 198 +#define __NR_getuid32 199 +#define __NR_getgid32 200 +#define __NR_geteuid32 201 +#define __NR_getegid32 202 +#define __NR_setreuid32 203 +#define __NR_setregid32 204 +#define __NR_getgroups32 205 +#define __NR_setgroups32 206 +#define __NR_fchown32 207 +#define __NR_setresuid32 208 +#define __NR_getresuid32 209 +#define __NR_setresgid32 210 +#define __NR_getresgid32 211 +#define __NR_chown32 212 +#define __NR_setuid32 213 +#define __NR_setgid32 214 +#define __NR_setfsuid32 215 +#define __NR_setfsgid32 216 +#define __NR_pivot_root 217 +#define __NR_mincore 218 +#define __NR_madvise 219 + +/* Non-multiplexed socket family */ +#define __NR_socket 220 +#define __NR_bind 221 +#define __NR_connect 222 +#define __NR_listen 223 +#define __NR_accept 224 +#define __NR_getsockname 225 +#define __NR_getpeername 226 +#define __NR_socketpair 227 +#define __NR_send 228 +#define __NR_sendto 229 +#define __NR_recv 230 +#define __NR_recvfrom 231 +#define __NR_shutdown 232 +#define __NR_setsockopt 233 +#define __NR_getsockopt 234 +#define __NR_sendmsg 235 +#define __NR_recvmsg 236 + +/* Non-multiplexed IPC family */ +#define __NR_semop 237 +#define __NR_semget 238 +#define __NR_semctl 239 +#define __NR_msgsnd 240 +#define __NR_msgrcv 241 +#define __NR_msgget 242 +#define __NR_msgctl 243 +#if 0 +#define __NR_shmatcall 244 +#endif +#define __NR_shmdt 245 +#define __NR_shmget 246 +#define __NR_shmctl 247 + +#define __NR_getdents64 248 +#define __NR_fcntl64 249 +/* 223 is unused */ +#define __NR_gettid 252 +#define __NR_readahead 253 +#define __NR_setxattr 254 +#define __NR_lsetxattr 255 +#define __NR_fsetxattr 256 +#define __NR_getxattr 257 +#define __NR_lgetxattr 258 +#define __NR_fgetxattr 269 +#define __NR_listxattr 260 +#define __NR_llistxattr 261 +#define __NR_flistxattr 262 +#define __NR_removexattr 263 +#define __NR_lremovexattr 264 +#define __NR_fremovexattr 265 +#define __NR_tkill 266 +#define __NR_sendfile64 267 +#define __NR_futex 268 +#define __NR_sched_setaffinity 269 +#define __NR_sched_getaffinity 270 +#define __NR_set_thread_area 271 +#define __NR_get_thread_area 272 +#define __NR_io_setup 273 +#define __NR_io_destroy 274 +#define __NR_io_getevents 275 +#define __NR_io_submit 276 +#define __NR_io_cancel 277 +#define __NR_fadvise64 278 +#define __NR_exit_group 280 + +#define __NR_lookup_dcookie 281 +#define __NR_epoll_create 282 +#define __NR_epoll_ctl 283 +#define __NR_epoll_wait 284 +#define __NR_remap_file_pages 285 +#define __NR_set_tid_address 286 +#define __NR_timer_create 287 +#define __NR_timer_settime (__NR_timer_create+1) +#define __NR_timer_gettime (__NR_timer_create+2) +#define __NR_timer_getoverrun (__NR_timer_create+3) +#define __NR_timer_delete (__NR_timer_create+4) +#define __NR_clock_settime (__NR_timer_create+5) +#define __NR_clock_gettime (__NR_timer_create+6) +#define __NR_clock_getres (__NR_timer_create+7) +#define __NR_clock_nanosleep (__NR_timer_create+8) +#define __NR_statfs64 296 +#define __NR_fstatfs64 297 +#define __NR_tgkill 298 +#define __NR_utimes 299 +#define __NR_fadvise64_64 300 +#define __NR_vserver 301 +#define __NR_mbind 302 +#define __NR_get_mempolicy 303 +#define __NR_set_mempolicy 304 +#define __NR_mq_open 305 +#define __NR_mq_unlink (__NR_mq_open+1) +#define __NR_mq_timedsend (__NR_mq_open+2) +#define __NR_mq_timedreceive (__NR_mq_open+3) +#define __NR_mq_notify (__NR_mq_open+4) +#define __NR_mq_getsetattr (__NR_mq_open+5) +#define __NR_kexec_load 311 +#define __NR_waitid 312 +#define __NR_add_key 313 +#define __NR_request_key 314 +#define __NR_keyctl 315 +#define __NR_ioprio_set 316 +#define __NR_ioprio_get 317 +#define __NR_inotify_init 318 +#define __NR_inotify_add_watch 319 +#define __NR_inotify_rm_watch 320 +/* 321 is unused */ +#define __NR_migrate_pages 322 +#define __NR_openat 323 +#define __NR_mkdirat 324 +#define __NR_mknodat 325 +#define __NR_fchownat 326 +#define __NR_futimesat 327 +#define __NR_fstatat64 328 +#define __NR_unlinkat 329 +#define __NR_renameat 330 +#define __NR_linkat 331 +#define __NR_symlinkat 332 +#define __NR_readlinkat 333 +#define __NR_fchmodat 334 +#define __NR_faccessat 335 +#define __NR_pselect6 336 +#define __NR_ppoll 337 +#define __NR_unshare 338 +#define __NR_set_robust_list 339 +#define __NR_get_robust_list 340 +#define __NR_splice 341 +#define __NR_sync_file_range 342 +#define __NR_tee 343 +#define __NR_vmsplice 344 +#define __NR_move_pages 345 +#define __NR_getcpu 346 +#define __NR_epoll_pwait 347 +#define __NR_utimensat 348 +#define __NR_signalfd 349 +#define __NR_timerfd_create 350 +#define __NR_eventfd 351 +#define __NR_fallocate 352 +#define __NR_timerfd_settime 353 +#define __NR_timerfd_gettime 354 +#define __NR_signalfd4 355 +#define __NR_eventfd2 356 +#define __NR_epoll_create1 357 +#define __NR_dup3 358 +#define __NR_pipe2 359 +#define __NR_inotify_init1 360 + +#ifdef __KERNEL__ + +#define NR_syscalls 361 + +#define __ARCH_WANT_IPC_PARSE_VERSION +#define __ARCH_WANT_OLD_READDIR +#define __ARCH_WANT_OLD_STAT +#define __ARCH_WANT_STAT64 +#define __ARCH_WANT_SYS_ALARM +#define __ARCH_WANT_SYS_GETHOSTNAME +#define __ARCH_WANT_SYS_PAUSE +#define __ARCH_WANT_SYS_SGETMASK +#define __ARCH_WANT_SYS_SIGNAL +#define __ARCH_WANT_SYS_TIME +#define __ARCH_WANT_SYS_UTIME +#define __ARCH_WANT_SYS_WAITPID +#define __ARCH_WANT_SYS_SOCKETCALL +#define __ARCH_WANT_SYS_FADVISE64 +#define __ARCH_WANT_SYS_GETPGRP +#define __ARCH_WANT_SYS_LLSEEK +#define __ARCH_WANT_SYS_NICE +#define __ARCH_WANT_SYS_OLD_GETRLIMIT +#define __ARCH_WANT_SYS_OLDUMOUNT +#define __ARCH_WANT_SYS_SIGPENDING +#define __ARCH_WANT_SYS_SIGPROCMASK +#define __ARCH_WANT_SYS_RT_SIGACTION + +/* + * "Conditional" syscalls + * + * What we want is __attribute__((weak,alias("sys_ni_syscall"))), + * but it doesn't work on all toolchains, so we just do it by hand + */ +#ifndef cond_syscall +#define cond_syscall(x) asm(".weak\t" #x "\n\t.set\t" #x ",sys_ni_syscall") +#endif + +#endif /* __KERNEL__ */ +#endif /* __ASM_SH_UNISTD_64_H */ diff --git a/arch/sh/include/asm/user.h b/arch/sh/include/asm/user.h new file mode 100644 index 00000000000..8fd3cf6c58d --- /dev/null +++ b/arch/sh/include/asm/user.h @@ -0,0 +1,67 @@ +#ifndef __ASM_SH_USER_H +#define __ASM_SH_USER_H + +#include +#include + +/* + * Core file format: The core file is written in such a way that gdb + * can understand it and provide useful information to the user (under + * linux we use the `trad-core' bfd). The file contents are as follows: + * + * upage: 1 page consisting of a user struct that tells gdb + * what is present in the file. Directly after this is a + * copy of the task_struct, which is currently not used by gdb, + * but it may come in handy at some point. All of the registers + * are stored as part of the upage. The upage should always be + * only one page long. + * data: The data segment follows next. We use current->end_text to + * current->brk to pick up all of the user variables, plus any memory + * that may have been sbrk'ed. No attempt is made to determine if a + * page is demand-zero or if a page is totally unused, we just cover + * the entire range. All of the addresses are rounded in such a way + * that an integral number of pages is written. + * stack: We need the stack information in order to get a meaningful + * backtrace. We need to write the data from usp to + * current->start_stack, so we round each of these in order to be able + * to write an integer number of pages. + */ + +#if defined(__SH5__) || defined(CONFIG_CPU_SH5) +struct user_fpu_struct { + unsigned long fp_regs[32]; + unsigned int fpscr; +}; +#else +struct user_fpu_struct { + unsigned long fp_regs[16]; + unsigned long xfp_regs[16]; + unsigned long fpscr; + unsigned long fpul; +}; +#endif + +struct user { + struct pt_regs regs; /* entire machine state */ + struct user_fpu_struct fpu; /* Math Co-processor registers */ + int u_fpvalid; /* True if math co-processor being used */ + size_t u_tsize; /* text size (pages) */ + size_t u_dsize; /* data size (pages) */ + size_t u_ssize; /* stack size (pages) */ + unsigned long start_code; /* text starting address */ + unsigned long start_data; /* data starting address */ + unsigned long start_stack; /* stack starting address */ + long int signal; /* signal causing core dump */ + unsigned long u_ar0; /* help gdb find registers */ + struct user_fpu_struct* u_fpstate; /* Math Co-processor pointer */ + unsigned long magic; /* identifies a core file */ + char u_comm[32]; /* user command name */ +}; + +#define NBPG PAGE_SIZE +#define UPAGES 1 +#define HOST_TEXT_START_ADDR (u.start_code) +#define HOST_DATA_START_ADDR (u.start_data) +#define HOST_STACK_END_ADDR (u.start_stack + u.u_ssize * NBPG) + +#endif /* __ASM_SH_USER_H */ diff --git a/arch/sh/include/asm/vga.h b/arch/sh/include/asm/vga.h new file mode 100644 index 00000000000..06a5de8ace1 --- /dev/null +++ b/arch/sh/include/asm/vga.h @@ -0,0 +1,6 @@ +#ifndef __ASM_SH_VGA_H +#define __ASM_SH_VGA_H + +/* Stupid drivers. */ + +#endif /* __ASM_SH_VGA_H */ diff --git a/arch/sh/include/asm/watchdog.h b/arch/sh/include/asm/watchdog.h new file mode 100644 index 00000000000..f024fed00a7 --- /dev/null +++ b/arch/sh/include/asm/watchdog.h @@ -0,0 +1,107 @@ +/* + * include/asm-sh/watchdog.h + * + * Copyright (C) 2002, 2003 Paul Mundt + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ +#ifndef __ASM_SH_WATCHDOG_H +#define __ASM_SH_WATCHDOG_H +#ifdef __KERNEL__ + +#include +#include +#include + +/* + * See cpu-sh2/watchdog.h for explanation of this stupidity.. + */ +#ifndef WTCNT_R +# define WTCNT_R WTCNT +#endif + +#ifndef WTCSR_R +# define WTCSR_R WTCSR +#endif + +#define WTCNT_HIGH 0x5a +#define WTCSR_HIGH 0xa5 + +#define WTCSR_CKS2 0x04 +#define WTCSR_CKS1 0x02 +#define WTCSR_CKS0 0x01 + +/* + * CKS0-2 supports a number of clock division ratios. At the time the watchdog + * is enabled, it defaults to a 41 usec overflow period .. we overload this to + * something a little more reasonable, and really can't deal with anything + * lower than WTCSR_CKS_1024, else we drop back into the usec range. + * + * Clock Division Ratio Overflow Period + * -------------------------------------------- + * 1/32 (initial value) 41 usecs + * 1/64 82 usecs + * 1/128 164 usecs + * 1/256 328 usecs + * 1/512 656 usecs + * 1/1024 1.31 msecs + * 1/2048 2.62 msecs + * 1/4096 5.25 msecs + */ +#define WTCSR_CKS_32 0x00 +#define WTCSR_CKS_64 0x01 +#define WTCSR_CKS_128 0x02 +#define WTCSR_CKS_256 0x03 +#define WTCSR_CKS_512 0x04 +#define WTCSR_CKS_1024 0x05 +#define WTCSR_CKS_2048 0x06 +#define WTCSR_CKS_4096 0x07 + +/** + * sh_wdt_read_cnt - Read from Counter + * Reads back the WTCNT value. + */ +static inline __u8 sh_wdt_read_cnt(void) +{ + return ctrl_inb(WTCNT_R); +} + +/** + * sh_wdt_write_cnt - Write to Counter + * @val: Value to write + * + * Writes the given value @val to the lower byte of the timer counter. + * The upper byte is set manually on each write. + */ +static inline void sh_wdt_write_cnt(__u8 val) +{ + ctrl_outw((WTCNT_HIGH << 8) | (__u16)val, WTCNT); +} + +/** + * sh_wdt_read_csr - Read from Control/Status Register + * + * Reads back the WTCSR value. + */ +static inline __u8 sh_wdt_read_csr(void) +{ + return ctrl_inb(WTCSR_R); +} + +/** + * sh_wdt_write_csr - Write to Control/Status Register + * @val: Value to write + * + * Writes the given value @val to the lower byte of the control/status + * register. The upper byte is set manually on each write. + */ +static inline void sh_wdt_write_csr(__u8 val) +{ + ctrl_outw((WTCSR_HIGH << 8) | (__u16)val, WTCSR); +} + +#endif /* __KERNEL__ */ +#endif /* __ASM_SH_WATCHDOG_H */ diff --git a/arch/sh/include/asm/xor.h b/arch/sh/include/asm/xor.h new file mode 100644 index 00000000000..c82eb12a5b1 --- /dev/null +++ b/arch/sh/include/asm/xor.h @@ -0,0 +1 @@ +#include diff --git a/arch/sh/include/cpu-sh2/cpu/addrspace.h b/arch/sh/include/cpu-sh2/cpu/addrspace.h new file mode 100644 index 00000000000..2b9ab93efa4 --- /dev/null +++ b/arch/sh/include/cpu-sh2/cpu/addrspace.h @@ -0,0 +1,19 @@ +/* + * Definitions for the address spaces of the SH-2 CPUs. + * + * Copyright (C) 2003 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#ifndef __ASM_CPU_SH2_ADDRSPACE_H +#define __ASM_CPU_SH2_ADDRSPACE_H + +#define P0SEG 0x00000000 +#define P1SEG 0x80000000 +#define P2SEG 0xa0000000 +#define P3SEG 0xc0000000 +#define P4SEG 0xe0000000 + +#endif /* __ASM_CPU_SH2_ADDRSPACE_H */ diff --git a/arch/sh/include/cpu-sh2/cpu/cache.h b/arch/sh/include/cpu-sh2/cpu/cache.h new file mode 100644 index 00000000000..4e0b1650068 --- /dev/null +++ b/arch/sh/include/cpu-sh2/cpu/cache.h @@ -0,0 +1,41 @@ +/* + * include/asm-sh/cpu-sh2/cache.h + * + * Copyright (C) 2003 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#ifndef __ASM_CPU_SH2_CACHE_H +#define __ASM_CPU_SH2_CACHE_H + +#define L1_CACHE_SHIFT 4 + +#define SH_CACHE_VALID 1 +#define SH_CACHE_UPDATED 2 +#define SH_CACHE_COMBINED 4 +#define SH_CACHE_ASSOC 8 + +#if defined(CONFIG_CPU_SUBTYPE_SH7619) +#define CCR 0xffffffec + +#define CCR_CACHE_CE 0x01 /* Cache enable */ +#define CCR_CACHE_WT 0x06 /* CCR[bit1=1,bit2=1] */ + /* 0x00000000-0x7fffffff: Write-through */ + /* 0x80000000-0x9fffffff: Write-back */ + /* 0xc0000000-0xdfffffff: Write-through */ +#define CCR_CACHE_CB 0x00 /* CCR[bit1=0,bit2=0] */ + /* 0x00000000-0x7fffffff: Write-back */ + /* 0x80000000-0x9fffffff: Write-through */ + /* 0xc0000000-0xdfffffff: Write-back */ +#define CCR_CACHE_CF 0x08 /* Cache invalidate */ + +#define CACHE_OC_ADDRESS_ARRAY 0xf0000000 +#define CACHE_OC_DATA_ARRAY 0xf1000000 + +#define CCR_CACHE_ENABLE CCR_CACHE_CE +#define CCR_CACHE_INVALIDATE CCR_CACHE_CF +#endif + +#endif /* __ASM_CPU_SH2_CACHE_H */ diff --git a/arch/sh/include/cpu-sh2/cpu/cacheflush.h b/arch/sh/include/cpu-sh2/cpu/cacheflush.h new file mode 100644 index 00000000000..2979efb26de --- /dev/null +++ b/arch/sh/include/cpu-sh2/cpu/cacheflush.h @@ -0,0 +1,44 @@ +/* + * include/asm-sh/cpu-sh2/cacheflush.h + * + * Copyright (C) 2003 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#ifndef __ASM_CPU_SH2_CACHEFLUSH_H +#define __ASM_CPU_SH2_CACHEFLUSH_H + +/* + * Cache flushing: + * + * - flush_cache_all() flushes entire cache + * - flush_cache_mm(mm) flushes the specified mm context's cache lines + * - flush_cache_dup mm(mm) handles cache flushing when forking + * - flush_cache_page(mm, vmaddr, pfn) flushes a single page + * - flush_cache_range(vma, start, end) flushes a range of pages + * + * - flush_dcache_page(pg) flushes(wback&invalidates) a page for dcache + * - flush_icache_range(start, end) flushes(invalidates) a range for icache + * - flush_icache_page(vma, pg) flushes(invalidates) a page for icache + * + * Caches are indexed (effectively) by physical address on SH-2, so + * we don't need them. + */ +#define flush_cache_all() do { } while (0) +#define flush_cache_mm(mm) do { } while (0) +#define flush_cache_dup_mm(mm) do { } while (0) +#define flush_cache_range(vma, start, end) do { } while (0) +#define flush_cache_page(vma, vmaddr, pfn) do { } while (0) +#define flush_dcache_page(page) do { } while (0) +#define flush_dcache_mmap_lock(mapping) do { } while (0) +#define flush_dcache_mmap_unlock(mapping) do { } while (0) +#define flush_icache_range(start, end) do { } while (0) +#define flush_icache_page(vma,pg) do { } while (0) +#define flush_icache_user_range(vma,pg,adr,len) do { } while (0) +#define flush_cache_sigtramp(vaddr) do { } while (0) + +#define p3_cache_init() do { } while (0) +#endif /* __ASM_CPU_SH2_CACHEFLUSH_H */ + diff --git a/arch/sh/include/cpu-sh2/cpu/dma.h b/arch/sh/include/cpu-sh2/cpu/dma.h new file mode 100644 index 00000000000..d66b43cdc63 --- /dev/null +++ b/arch/sh/include/cpu-sh2/cpu/dma.h @@ -0,0 +1,23 @@ +/* + * Definitions for the SH-2 DMAC. + * + * Copyright (C) 2003 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#ifndef __ASM_CPU_SH2_DMA_H +#define __ASM_CPU_SH2_DMA_H + +#define SH_MAX_DMA_CHANNELS 2 + +#define SAR ((unsigned long[]){ 0xffffff80, 0xffffff90 }) +#define DAR ((unsigned long[]){ 0xffffff84, 0xffffff94 }) +#define DMATCR ((unsigned long[]){ 0xffffff88, 0xffffff98 }) +#define CHCR ((unsigned long[]){ 0xfffffffc, 0xffffff9c }) + +#define DMAOR 0xffffffb0 + +#endif /* __ASM_CPU_SH2_DMA_H */ + diff --git a/arch/sh/include/cpu-sh2/cpu/freq.h b/arch/sh/include/cpu-sh2/cpu/freq.h new file mode 100644 index 00000000000..31de475da70 --- /dev/null +++ b/arch/sh/include/cpu-sh2/cpu/freq.h @@ -0,0 +1,18 @@ +/* + * include/asm-sh/cpu-sh2/freq.h + * + * Copyright (C) 2006 Yoshinori Sato + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#ifndef __ASM_CPU_SH2_FREQ_H +#define __ASM_CPU_SH2_FREQ_H + +#if defined(CONFIG_CPU_SUBTYPE_SH7619) +#define FREQCR 0xf815ff80 +#endif + +#endif /* __ASM_CPU_SH2_FREQ_H */ + diff --git a/arch/sh/include/cpu-sh2/cpu/mmu_context.h b/arch/sh/include/cpu-sh2/cpu/mmu_context.h new file mode 100644 index 00000000000..beeb299e01e --- /dev/null +++ b/arch/sh/include/cpu-sh2/cpu/mmu_context.h @@ -0,0 +1,16 @@ +/* + * include/asm-sh/cpu-sh2/mmu_context.h + * + * Copyright (C) 2003 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#ifndef __ASM_CPU_SH2_MMU_CONTEXT_H +#define __ASM_CPU_SH2_MMU_CONTEXT_H + +/* No MMU */ + +#endif /* __ASM_CPU_SH2_MMU_CONTEXT_H */ + diff --git a/arch/sh/include/cpu-sh2/cpu/rtc.h b/arch/sh/include/cpu-sh2/cpu/rtc.h new file mode 100644 index 00000000000..39e2d6e9478 --- /dev/null +++ b/arch/sh/include/cpu-sh2/cpu/rtc.h @@ -0,0 +1,8 @@ +#ifndef __ASM_SH_CPU_SH2_RTC_H +#define __ASM_SH_CPU_SH2_RTC_H + +#define rtc_reg_size sizeof(u16) +#define RTC_BIT_INVERTED 0 +#define RTC_DEF_CAPABILITIES 0UL + +#endif /* __ASM_SH_CPU_SH2_RTC_H */ diff --git a/arch/sh/include/cpu-sh2/cpu/sigcontext.h b/arch/sh/include/cpu-sh2/cpu/sigcontext.h new file mode 100644 index 00000000000..fe5c15dd6e8 --- /dev/null +++ b/arch/sh/include/cpu-sh2/cpu/sigcontext.h @@ -0,0 +1,17 @@ +#ifndef __ASM_CPU_SH2_SIGCONTEXT_H +#define __ASM_CPU_SH2_SIGCONTEXT_H + +struct sigcontext { + unsigned long oldmask; + + /* CPU registers */ + unsigned long sc_regs[16]; + unsigned long sc_pc; + unsigned long sc_pr; + unsigned long sc_sr; + unsigned long sc_gbr; + unsigned long sc_mach; + unsigned long sc_macl; +}; + +#endif /* __ASM_CPU_SH2_SIGCONTEXT_H */ diff --git a/arch/sh/include/cpu-sh2/cpu/timer.h b/arch/sh/include/cpu-sh2/cpu/timer.h new file mode 100644 index 00000000000..a39c241e819 --- /dev/null +++ b/arch/sh/include/cpu-sh2/cpu/timer.h @@ -0,0 +1,6 @@ +#ifndef __ASM_CPU_SH2_TIMER_H +#define __ASM_CPU_SH2_TIMER_H + +/* Nothing needed yet */ + +#endif /* __ASM_CPU_SH2_TIMER_H */ diff --git a/arch/sh/include/cpu-sh2/cpu/ubc.h b/arch/sh/include/cpu-sh2/cpu/ubc.h new file mode 100644 index 00000000000..ba0e87f19c7 --- /dev/null +++ b/arch/sh/include/cpu-sh2/cpu/ubc.h @@ -0,0 +1,32 @@ +/* + * include/asm-sh/cpu-sh2/ubc.h + * + * Copyright (C) 2003 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#ifndef __ASM_CPU_SH2_UBC_H +#define __ASM_CPU_SH2_UBC_H + +#define UBC_BARA 0xffffff40 +#define UBC_BAMRA 0xffffff44 +#define UBC_BBRA 0xffffff48 +#define UBC_BARB 0xffffff60 +#define UBC_BAMRB 0xffffff64 +#define UBC_BBRB 0xffffff68 +#define UBC_BDRB 0xffffff70 +#define UBC_BDMRB 0xffffff74 +#define UBC_BRCR 0xffffff78 + +/* + * We don't have any ASID changes to make in the UBC on the SH-2. + * + * Make these purposely invalid to track misuse. + */ +#define UBC_BASRA 0x00000000 +#define UBC_BASRB 0x00000000 + +#endif /* __ASM_CPU_SH2_UBC_H */ + diff --git a/arch/sh/include/cpu-sh2/cpu/watchdog.h b/arch/sh/include/cpu-sh2/cpu/watchdog.h new file mode 100644 index 00000000000..393161c9c6d --- /dev/null +++ b/arch/sh/include/cpu-sh2/cpu/watchdog.h @@ -0,0 +1,69 @@ +/* + * include/asm-sh/cpu-sh2/watchdog.h + * + * Copyright (C) 2002, 2003 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#ifndef __ASM_CPU_SH2_WATCHDOG_H +#define __ASM_CPU_SH2_WATCHDOG_H + +/* + * More SH-2 brilliance .. its not good enough that we can't read + * and write the same sizes to WTCNT, now we have to read and write + * with different sizes at different addresses for WTCNT _and_ RSTCSR. + * + * At least on the bright side no one has managed to screw over WTCSR + * in this fashion .. yet. + */ +/* Register definitions */ +#define WTCNT 0xfffffe80 +#define WTCSR 0xfffffe80 +#define RSTCSR 0xfffffe82 + +#define WTCNT_R (WTCNT + 1) +#define RSTCSR_R (RSTCSR + 1) + +/* Bit definitions */ +#define WTCSR_IOVF 0x80 +#define WTCSR_WT 0x40 +#define WTCSR_TME 0x20 +#define WTCSR_RSTS 0x00 + +#define RSTCSR_RSTS 0x20 + +/** + * sh_wdt_read_rstcsr - Read from Reset Control/Status Register + * + * Reads back the RSTCSR value. + */ +static inline __u8 sh_wdt_read_rstcsr(void) +{ + /* + * Same read/write brain-damage as for WTCNT here.. + */ + return ctrl_inb(RSTCSR_R); +} + +/** + * sh_wdt_write_csr - Write to Reset Control/Status Register + * + * @val: Value to write + * + * Writes the given value @val to the lower byte of the control/status + * register. The upper byte is set manually on each write. + */ +static inline void sh_wdt_write_rstcsr(__u8 val) +{ + /* + * Note: Due to the brain-damaged nature of this register, + * we can't presently touch the WOVF bit, since the upper byte + * has to be swapped for this. So just leave it alone.. + */ + ctrl_outw((WTCNT_HIGH << 8) | (__u16)val, RSTCSR); +} + +#endif /* __ASM_CPU_SH2_WATCHDOG_H */ + diff --git a/arch/sh/include/cpu-sh2a/cpu/addrspace.h b/arch/sh/include/cpu-sh2a/cpu/addrspace.h new file mode 100644 index 00000000000..795ddd6856a --- /dev/null +++ b/arch/sh/include/cpu-sh2a/cpu/addrspace.h @@ -0,0 +1,10 @@ +#ifndef __ASM_SH_CPU_SH2A_ADDRSPACE_H +#define __ASM_SH_CPU_SH2A_ADDRSPACE_H + +#define P0SEG 0x00000000 +#define P1SEG 0x00000000 +#define P2SEG 0x20000000 +#define P3SEG 0x00000000 +#define P4SEG 0x80000000 + +#endif /* __ASM_SH_CPU_SH2A_ADDRSPACE_H */ diff --git a/arch/sh/include/cpu-sh2a/cpu/cache.h b/arch/sh/include/cpu-sh2a/cpu/cache.h new file mode 100644 index 00000000000..afe228b3f49 --- /dev/null +++ b/arch/sh/include/cpu-sh2a/cpu/cache.h @@ -0,0 +1,40 @@ +/* + * include/asm-sh/cpu-sh2a/cache.h + * + * Copyright (C) 2004 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#ifndef __ASM_CPU_SH2A_CACHE_H +#define __ASM_CPU_SH2A_CACHE_H + +#define L1_CACHE_SHIFT 4 + +#define SH_CACHE_VALID 1 +#define SH_CACHE_UPDATED 2 +#define SH_CACHE_COMBINED 4 +#define SH_CACHE_ASSOC 8 + +#define CCR 0xfffc1000 /* CCR1 */ +#define CCR2 0xfffc1004 + +/* + * Most of the SH-2A CCR1 definitions resemble the SH-4 ones. All others not + * listed here are reserved. + */ +#define CCR_CACHE_CB 0x0000 /* Hack */ +#define CCR_CACHE_OCE 0x0001 +#define CCR_CACHE_WT 0x0002 +#define CCR_CACHE_OCI 0x0008 /* OCF */ +#define CCR_CACHE_ICE 0x0100 +#define CCR_CACHE_ICI 0x0800 /* ICF */ + +#define CACHE_IC_ADDRESS_ARRAY 0xf0000000 +#define CACHE_OC_ADDRESS_ARRAY 0xf0800000 + +#define CCR_CACHE_ENABLE (CCR_CACHE_OCE | CCR_CACHE_ICE) +#define CCR_CACHE_INVALIDATE (CCR_CACHE_OCI | CCR_CACHE_ICI) + +#endif /* __ASM_CPU_SH2A_CACHE_H */ diff --git a/arch/sh/include/cpu-sh2a/cpu/cacheflush.h b/arch/sh/include/cpu-sh2a/cpu/cacheflush.h new file mode 100644 index 00000000000..2979efb26de --- /dev/null +++ b/arch/sh/include/cpu-sh2a/cpu/cacheflush.h @@ -0,0 +1,44 @@ +/* + * include/asm-sh/cpu-sh2/cacheflush.h + * + * Copyright (C) 2003 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#ifndef __ASM_CPU_SH2_CACHEFLUSH_H +#define __ASM_CPU_SH2_CACHEFLUSH_H + +/* + * Cache flushing: + * + * - flush_cache_all() flushes entire cache + * - flush_cache_mm(mm) flushes the specified mm context's cache lines + * - flush_cache_dup mm(mm) handles cache flushing when forking + * - flush_cache_page(mm, vmaddr, pfn) flushes a single page + * - flush_cache_range(vma, start, end) flushes a range of pages + * + * - flush_dcache_page(pg) flushes(wback&invalidates) a page for dcache + * - flush_icache_range(start, end) flushes(invalidates) a range for icache + * - flush_icache_page(vma, pg) flushes(invalidates) a page for icache + * + * Caches are indexed (effectively) by physical address on SH-2, so + * we don't need them. + */ +#define flush_cache_all() do { } while (0) +#define flush_cache_mm(mm) do { } while (0) +#define flush_cache_dup_mm(mm) do { } while (0) +#define flush_cache_range(vma, start, end) do { } while (0) +#define flush_cache_page(vma, vmaddr, pfn) do { } while (0) +#define flush_dcache_page(page) do { } while (0) +#define flush_dcache_mmap_lock(mapping) do { } while (0) +#define flush_dcache_mmap_unlock(mapping) do { } while (0) +#define flush_icache_range(start, end) do { } while (0) +#define flush_icache_page(vma,pg) do { } while (0) +#define flush_icache_user_range(vma,pg,adr,len) do { } while (0) +#define flush_cache_sigtramp(vaddr) do { } while (0) + +#define p3_cache_init() do { } while (0) +#endif /* __ASM_CPU_SH2_CACHEFLUSH_H */ + diff --git a/arch/sh/include/cpu-sh2a/cpu/dma.h b/arch/sh/include/cpu-sh2a/cpu/dma.h new file mode 100644 index 00000000000..d66b43cdc63 --- /dev/null +++ b/arch/sh/include/cpu-sh2a/cpu/dma.h @@ -0,0 +1,23 @@ +/* + * Definitions for the SH-2 DMAC. + * + * Copyright (C) 2003 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#ifndef __ASM_CPU_SH2_DMA_H +#define __ASM_CPU_SH2_DMA_H + +#define SH_MAX_DMA_CHANNELS 2 + +#define SAR ((unsigned long[]){ 0xffffff80, 0xffffff90 }) +#define DAR ((unsigned long[]){ 0xffffff84, 0xffffff94 }) +#define DMATCR ((unsigned long[]){ 0xffffff88, 0xffffff98 }) +#define CHCR ((unsigned long[]){ 0xfffffffc, 0xffffff9c }) + +#define DMAOR 0xffffffb0 + +#endif /* __ASM_CPU_SH2_DMA_H */ + diff --git a/arch/sh/include/cpu-sh2a/cpu/freq.h b/arch/sh/include/cpu-sh2a/cpu/freq.h new file mode 100644 index 00000000000..830fd43b6cd --- /dev/null +++ b/arch/sh/include/cpu-sh2a/cpu/freq.h @@ -0,0 +1,16 @@ +/* + * include/asm-sh/cpu-sh2a/freq.h + * + * Copyright (C) 2006 Yoshinori Sato + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#ifndef __ASM_CPU_SH2A_FREQ_H +#define __ASM_CPU_SH2A_FREQ_H + +#define FREQCR 0xfffe0010 + +#endif /* __ASM_CPU_SH2A_FREQ_H */ + diff --git a/arch/sh/include/cpu-sh2a/cpu/mmu_context.h b/arch/sh/include/cpu-sh2a/cpu/mmu_context.h new file mode 100644 index 00000000000..beeb299e01e --- /dev/null +++ b/arch/sh/include/cpu-sh2a/cpu/mmu_context.h @@ -0,0 +1,16 @@ +/* + * include/asm-sh/cpu-sh2/mmu_context.h + * + * Copyright (C) 2003 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#ifndef __ASM_CPU_SH2_MMU_CONTEXT_H +#define __ASM_CPU_SH2_MMU_CONTEXT_H + +/* No MMU */ + +#endif /* __ASM_CPU_SH2_MMU_CONTEXT_H */ + diff --git a/arch/sh/include/cpu-sh2a/cpu/rtc.h b/arch/sh/include/cpu-sh2a/cpu/rtc.h new file mode 100644 index 00000000000..afb511e2bed --- /dev/null +++ b/arch/sh/include/cpu-sh2a/cpu/rtc.h @@ -0,0 +1,8 @@ +#ifndef __ASM_SH_CPU_SH2A_RTC_H +#define __ASM_SH_CPU_SH2A_RTC_H + +#define rtc_reg_size sizeof(u16) +#define RTC_BIT_INVERTED 0 +#define RTC_DEF_CAPABILITIES RTC_CAP_4_DIGIT_YEAR + +#endif /* __ASM_SH_CPU_SH2A_RTC_H */ diff --git a/arch/sh/include/cpu-sh2a/cpu/timer.h b/arch/sh/include/cpu-sh2a/cpu/timer.h new file mode 100644 index 00000000000..a39c241e819 --- /dev/null +++ b/arch/sh/include/cpu-sh2a/cpu/timer.h @@ -0,0 +1,6 @@ +#ifndef __ASM_CPU_SH2_TIMER_H +#define __ASM_CPU_SH2_TIMER_H + +/* Nothing needed yet */ + +#endif /* __ASM_CPU_SH2_TIMER_H */ diff --git a/arch/sh/include/cpu-sh2a/cpu/ubc.h b/arch/sh/include/cpu-sh2a/cpu/ubc.h new file mode 100644 index 00000000000..ba0e87f19c7 --- /dev/null +++ b/arch/sh/include/cpu-sh2a/cpu/ubc.h @@ -0,0 +1,32 @@ +/* + * include/asm-sh/cpu-sh2/ubc.h + * + * Copyright (C) 2003 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#ifndef __ASM_CPU_SH2_UBC_H +#define __ASM_CPU_SH2_UBC_H + +#define UBC_BARA 0xffffff40 +#define UBC_BAMRA 0xffffff44 +#define UBC_BBRA 0xffffff48 +#define UBC_BARB 0xffffff60 +#define UBC_BAMRB 0xffffff64 +#define UBC_BBRB 0xffffff68 +#define UBC_BDRB 0xffffff70 +#define UBC_BDMRB 0xffffff74 +#define UBC_BRCR 0xffffff78 + +/* + * We don't have any ASID changes to make in the UBC on the SH-2. + * + * Make these purposely invalid to track misuse. + */ +#define UBC_BASRA 0x00000000 +#define UBC_BASRB 0x00000000 + +#endif /* __ASM_CPU_SH2_UBC_H */ + diff --git a/arch/sh/include/cpu-sh2a/cpu/watchdog.h b/arch/sh/include/cpu-sh2a/cpu/watchdog.h new file mode 100644 index 00000000000..393161c9c6d --- /dev/null +++ b/arch/sh/include/cpu-sh2a/cpu/watchdog.h @@ -0,0 +1,69 @@ +/* + * include/asm-sh/cpu-sh2/watchdog.h + * + * Copyright (C) 2002, 2003 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#ifndef __ASM_CPU_SH2_WATCHDOG_H +#define __ASM_CPU_SH2_WATCHDOG_H + +/* + * More SH-2 brilliance .. its not good enough that we can't read + * and write the same sizes to WTCNT, now we have to read and write + * with different sizes at different addresses for WTCNT _and_ RSTCSR. + * + * At least on the bright side no one has managed to screw over WTCSR + * in this fashion .. yet. + */ +/* Register definitions */ +#define WTCNT 0xfffffe80 +#define WTCSR 0xfffffe80 +#define RSTCSR 0xfffffe82 + +#define WTCNT_R (WTCNT + 1) +#define RSTCSR_R (RSTCSR + 1) + +/* Bit definitions */ +#define WTCSR_IOVF 0x80 +#define WTCSR_WT 0x40 +#define WTCSR_TME 0x20 +#define WTCSR_RSTS 0x00 + +#define RSTCSR_RSTS 0x20 + +/** + * sh_wdt_read_rstcsr - Read from Reset Control/Status Register + * + * Reads back the RSTCSR value. + */ +static inline __u8 sh_wdt_read_rstcsr(void) +{ + /* + * Same read/write brain-damage as for WTCNT here.. + */ + return ctrl_inb(RSTCSR_R); +} + +/** + * sh_wdt_write_csr - Write to Reset Control/Status Register + * + * @val: Value to write + * + * Writes the given value @val to the lower byte of the control/status + * register. The upper byte is set manually on each write. + */ +static inline void sh_wdt_write_rstcsr(__u8 val) +{ + /* + * Note: Due to the brain-damaged nature of this register, + * we can't presently touch the WOVF bit, since the upper byte + * has to be swapped for this. So just leave it alone.. + */ + ctrl_outw((WTCNT_HIGH << 8) | (__u16)val, RSTCSR); +} + +#endif /* __ASM_CPU_SH2_WATCHDOG_H */ + diff --git a/arch/sh/include/cpu-sh3/cpu/adc.h b/arch/sh/include/cpu-sh3/cpu/adc.h new file mode 100644 index 00000000000..b289e3ca19a --- /dev/null +++ b/arch/sh/include/cpu-sh3/cpu/adc.h @@ -0,0 +1,28 @@ +#ifndef __ASM_CPU_SH3_ADC_H +#define __ASM_CPU_SH3_ADC_H + +/* + * Copyright (C) 2004 Andriy Skulysh + */ + + +#define ADDRAH 0xa4000080 +#define ADDRAL 0xa4000082 +#define ADDRBH 0xa4000084 +#define ADDRBL 0xa4000086 +#define ADDRCH 0xa4000088 +#define ADDRCL 0xa400008a +#define ADDRDH 0xa400008c +#define ADDRDL 0xa400008e +#define ADCSR 0xa4000090 + +#define ADCSR_ADF 0x80 +#define ADCSR_ADIE 0x40 +#define ADCSR_ADST 0x20 +#define ADCSR_MULTI 0x10 +#define ADCSR_CKS 0x08 +#define ADCSR_CH_MASK 0x07 + +#define ADCR 0xa4000092 + +#endif /* __ASM_CPU_SH3_ADC_H */ diff --git a/arch/sh/include/cpu-sh3/cpu/addrspace.h b/arch/sh/include/cpu-sh3/cpu/addrspace.h new file mode 100644 index 00000000000..0f94726c7d6 --- /dev/null +++ b/arch/sh/include/cpu-sh3/cpu/addrspace.h @@ -0,0 +1,19 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1999 by Kaz Kojima + * + * Defitions for the address spaces of the SH-3 CPUs. + */ +#ifndef __ASM_CPU_SH3_ADDRSPACE_H +#define __ASM_CPU_SH3_ADDRSPACE_H + +#define P0SEG 0x00000000 +#define P1SEG 0x80000000 +#define P2SEG 0xa0000000 +#define P3SEG 0xc0000000 +#define P4SEG 0xe0000000 + +#endif /* __ASM_CPU_SH3_ADDRSPACE_H */ diff --git a/arch/sh/include/cpu-sh3/cpu/cache.h b/arch/sh/include/cpu-sh3/cpu/cache.h new file mode 100644 index 00000000000..bee2d81c56b --- /dev/null +++ b/arch/sh/include/cpu-sh3/cpu/cache.h @@ -0,0 +1,43 @@ +/* + * include/asm-sh/cpu-sh3/cache.h + * + * Copyright (C) 1999 Niibe Yutaka + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#ifndef __ASM_CPU_SH3_CACHE_H +#define __ASM_CPU_SH3_CACHE_H + +#define L1_CACHE_SHIFT 4 + +#define SH_CACHE_VALID 1 +#define SH_CACHE_UPDATED 2 +#define SH_CACHE_COMBINED 4 +#define SH_CACHE_ASSOC 8 + +#define CCR 0xffffffec /* Address of Cache Control Register */ + +#define CCR_CACHE_CE 0x01 /* Cache Enable */ +#define CCR_CACHE_WT 0x02 /* Write-Through (for P0,U0,P3) (else writeback) */ +#define CCR_CACHE_CB 0x04 /* Write-Back (for P1) (else writethrough) */ +#define CCR_CACHE_CF 0x08 /* Cache Flush */ +#define CCR_CACHE_ORA 0x20 /* RAM mode */ + +#define CACHE_OC_ADDRESS_ARRAY 0xf0000000 +#define CACHE_PHYSADDR_MASK 0x1ffffc00 + +#define CCR_CACHE_ENABLE CCR_CACHE_CE +#define CCR_CACHE_INVALIDATE CCR_CACHE_CF + +#if defined(CONFIG_CPU_SUBTYPE_SH7705) || \ + defined(CONFIG_CPU_SUBTYPE_SH7710) || \ + defined(CONFIG_CPU_SUBTYPE_SH7720) || \ + defined(CONFIG_CPU_SUBTYPE_SH7721) +#define CCR3_REG 0xa40000b4 +#define CCR_CACHE_16KB 0x00010000 +#define CCR_CACHE_32KB 0x00020000 +#endif + +#endif /* __ASM_CPU_SH3_CACHE_H */ diff --git a/arch/sh/include/cpu-sh3/cpu/cacheflush.h b/arch/sh/include/cpu-sh3/cpu/cacheflush.h new file mode 100644 index 00000000000..f70d8ef76a1 --- /dev/null +++ b/arch/sh/include/cpu-sh3/cpu/cacheflush.h @@ -0,0 +1,70 @@ +/* + * include/asm-sh/cpu-sh3/cacheflush.h + * + * Copyright (C) 1999 Niibe Yutaka + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#ifndef __ASM_CPU_SH3_CACHEFLUSH_H +#define __ASM_CPU_SH3_CACHEFLUSH_H + +/* + * Cache flushing: + * + * - flush_cache_all() flushes entire cache + * - flush_cache_mm(mm) flushes the specified mm context's cache lines + * - flush_cache_dup mm(mm) handles cache flushing when forking + * - flush_cache_page(mm, vmaddr, pfn) flushes a single page + * - flush_cache_range(vma, start, end) flushes a range of pages + * + * - flush_dcache_page(pg) flushes(wback&invalidates) a page for dcache + * - flush_icache_range(start, end) flushes(invalidates) a range for icache + * - flush_icache_page(vma, pg) flushes(invalidates) a page for icache + * + * Caches are indexed (effectively) by physical address on SH-3, so + * we don't need them. + */ + +#if defined(CONFIG_SH7705_CACHE_32KB) + +/* SH7705 is an SH3 processor with 32KB cache. This has alias issues like the + * SH4. Unlike the SH4 this is a unified cache so we need to do some work + * in mmap when 'exec'ing a new binary + */ + /* 32KB cache, 4kb PAGE sizes need to check bit 12 */ +#define CACHE_ALIAS 0x00001000 + +#define PG_mapped PG_arch_1 + +void flush_cache_all(void); +void flush_cache_mm(struct mm_struct *mm); +#define flush_cache_dup_mm(mm) flush_cache_mm(mm) +void flush_cache_range(struct vm_area_struct *vma, unsigned long start, + unsigned long end); +void flush_cache_page(struct vm_area_struct *vma, unsigned long addr, unsigned long pfn); +void flush_dcache_page(struct page *pg); +void flush_icache_range(unsigned long start, unsigned long end); +void flush_icache_page(struct vm_area_struct *vma, struct page *page); +#else +#define flush_cache_all() do { } while (0) +#define flush_cache_mm(mm) do { } while (0) +#define flush_cache_dup_mm(mm) do { } while (0) +#define flush_cache_range(vma, start, end) do { } while (0) +#define flush_cache_page(vma, vmaddr, pfn) do { } while (0) +#define flush_dcache_page(page) do { } while (0) +#define flush_icache_range(start, end) do { } while (0) +#define flush_icache_page(vma,pg) do { } while (0) +#endif + +#define flush_dcache_mmap_lock(mapping) do { } while (0) +#define flush_dcache_mmap_unlock(mapping) do { } while (0) + +/* SH3 has unified cache so no special action needed here */ +#define flush_cache_sigtramp(vaddr) do { } while (0) +#define flush_icache_user_range(vma,pg,adr,len) do { } while (0) + +#define p3_cache_init() do { } while (0) + +#endif /* __ASM_CPU_SH3_CACHEFLUSH_H */ diff --git a/arch/sh/include/cpu-sh3/cpu/dac.h b/arch/sh/include/cpu-sh3/cpu/dac.h new file mode 100644 index 00000000000..05fda8316eb --- /dev/null +++ b/arch/sh/include/cpu-sh3/cpu/dac.h @@ -0,0 +1,41 @@ +#ifndef __ASM_CPU_SH3_DAC_H +#define __ASM_CPU_SH3_DAC_H + +/* + * Copyright (C) 2003 Andriy Skulysh + */ + + +#define DADR0 0xa40000a0 +#define DADR1 0xa40000a2 +#define DACR 0xa40000a4 +#define DACR_DAOE1 0x80 +#define DACR_DAOE0 0x40 +#define DACR_DAE 0x20 + + +static __inline__ void sh_dac_enable(int channel) +{ + unsigned char v; + v = ctrl_inb(DACR); + if(channel) v |= DACR_DAOE1; + else v |= DACR_DAOE0; + ctrl_outb(v,DACR); +} + +static __inline__ void sh_dac_disable(int channel) +{ + unsigned char v; + v = ctrl_inb(DACR); + if(channel) v &= ~DACR_DAOE1; + else v &= ~DACR_DAOE0; + ctrl_outb(v,DACR); +} + +static __inline__ void sh_dac_output(u8 value, int channel) +{ + if(channel) ctrl_outb(value,DADR1); + else ctrl_outb(value,DADR0); +} + +#endif /* __ASM_CPU_SH3_DAC_H */ diff --git a/arch/sh/include/cpu-sh3/cpu/dma.h b/arch/sh/include/cpu-sh3/cpu/dma.h new file mode 100644 index 00000000000..6813c3220a1 --- /dev/null +++ b/arch/sh/include/cpu-sh3/cpu/dma.h @@ -0,0 +1,51 @@ +#ifndef __ASM_CPU_SH3_DMA_H +#define __ASM_CPU_SH3_DMA_H + + +#if defined(CONFIG_CPU_SUBTYPE_SH7720) || \ + defined(CONFIG_CPU_SUBTYPE_SH7721) +#define SH_DMAC_BASE 0xa4010020 +#else +#define SH_DMAC_BASE 0xa4000020 +#endif + +#if defined(CONFIG_CPU_SUBTYPE_SH7720) || defined(CONFIG_CPU_SUBTYPE_SH7709) +#define DMTE0_IRQ 48 +#define DMTE1_IRQ 49 +#define DMTE2_IRQ 50 +#define DMTE3_IRQ 51 +#define DMTE4_IRQ 76 +#define DMTE5_IRQ 77 +#endif + +/* Definitions for the SuperH DMAC */ +#define TM_BURST 0x00000020 +#define TS_8 0x00000000 +#define TS_16 0x00000008 +#define TS_32 0x00000010 +#define TS_128 0x00000018 + +#define CHCR_TS_MASK 0x18 +#define CHCR_TS_SHIFT 3 + +#define DMAOR_INIT DMAOR_DME + +/* + * The SuperH DMAC supports a number of transmit sizes, we list them here, + * with their respective values as they appear in the CHCR registers. + */ +enum { + XMIT_SZ_8BIT, + XMIT_SZ_16BIT, + XMIT_SZ_32BIT, + XMIT_SZ_128BIT, +}; + +static unsigned int ts_shift[] __maybe_unused = { + [XMIT_SZ_8BIT] = 0, + [XMIT_SZ_16BIT] = 1, + [XMIT_SZ_32BIT] = 2, + [XMIT_SZ_128BIT] = 4, +}; + +#endif /* __ASM_CPU_SH3_DMA_H */ diff --git a/arch/sh/include/cpu-sh3/cpu/freq.h b/arch/sh/include/cpu-sh3/cpu/freq.h new file mode 100644 index 00000000000..53c62302b2e --- /dev/null +++ b/arch/sh/include/cpu-sh3/cpu/freq.h @@ -0,0 +1,27 @@ +/* + * include/asm-sh/cpu-sh3/freq.h + * + * Copyright (C) 2002, 2003 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#ifndef __ASM_CPU_SH3_FREQ_H +#define __ASM_CPU_SH3_FREQ_H + +#ifdef CONFIG_CPU_SUBTYPE_SH7712 +#define FRQCR 0xA415FF80 +#else +#define FRQCR 0xffffff80 +#endif + +#define MIN_DIVISOR_NR 0 +#define MAX_DIVISOR_NR 4 + +#define FRQCR_CKOEN 0x0100 +#define FRQCR_PLLEN 0x0080 +#define FRQCR_PSTBY 0x0040 + +#endif /* __ASM_CPU_SH3_FREQ_H */ + diff --git a/arch/sh/include/cpu-sh3/cpu/gpio.h b/arch/sh/include/cpu-sh3/cpu/gpio.h new file mode 100644 index 00000000000..4e53eb314b8 --- /dev/null +++ b/arch/sh/include/cpu-sh3/cpu/gpio.h @@ -0,0 +1,67 @@ +/* + * include/asm-sh/cpu-sh3/gpio.h + * + * Copyright (C) 2007 Markus Brunner, Mark Jonas + * + * Addresses for the Pin Function Controller + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#ifndef _CPU_SH3_GPIO_H +#define _CPU_SH3_GPIO_H + +#if defined(CONFIG_CPU_SUBTYPE_SH7720) || \ + defined(CONFIG_CPU_SUBTYPE_SH7721) + +/* Control registers */ +#define PORT_PACR 0xA4050100UL +#define PORT_PBCR 0xA4050102UL +#define PORT_PCCR 0xA4050104UL +#define PORT_PDCR 0xA4050106UL +#define PORT_PECR 0xA4050108UL +#define PORT_PFCR 0xA405010AUL +#define PORT_PGCR 0xA405010CUL +#define PORT_PHCR 0xA405010EUL +#define PORT_PJCR 0xA4050110UL +#define PORT_PKCR 0xA4050112UL +#define PORT_PLCR 0xA4050114UL +#define PORT_PMCR 0xA4050116UL +#define PORT_PPCR 0xA4050118UL +#define PORT_PRCR 0xA405011AUL +#define PORT_PSCR 0xA405011CUL +#define PORT_PTCR 0xA405011EUL +#define PORT_PUCR 0xA4050120UL +#define PORT_PVCR 0xA4050122UL + +/* Data registers */ +#define PORT_PADR 0xA4050140UL +/* Address of PORT_PBDR is wrong in the datasheet, see errata 2005-09-21 */ +#define PORT_PBDR 0xA4050142UL +#define PORT_PCDR 0xA4050144UL +#define PORT_PDDR 0xA4050146UL +#define PORT_PEDR 0xA4050148UL +#define PORT_PFDR 0xA405014AUL +#define PORT_PGDR 0xA405014CUL +#define PORT_PHDR 0xA405014EUL +#define PORT_PJDR 0xA4050150UL +#define PORT_PKDR 0xA4050152UL +#define PORT_PLDR 0xA4050154UL +#define PORT_PMDR 0xA4050156UL +#define PORT_PPDR 0xA4050158UL +#define PORT_PRDR 0xA405015AUL +#define PORT_PSDR 0xA405015CUL +#define PORT_PTDR 0xA405015EUL +#define PORT_PUDR 0xA4050160UL +#define PORT_PVDR 0xA4050162UL + +/* Pin Select Registers */ +#define PORT_PSELA 0xA4050124UL +#define PORT_PSELB 0xA4050126UL +#define PORT_PSELC 0xA4050128UL +#define PORT_PSELD 0xA405012AUL + +#endif + +#endif diff --git a/arch/sh/include/cpu-sh3/cpu/mmu_context.h b/arch/sh/include/cpu-sh3/cpu/mmu_context.h new file mode 100644 index 00000000000..ab09da73ce7 --- /dev/null +++ b/arch/sh/include/cpu-sh3/cpu/mmu_context.h @@ -0,0 +1,44 @@ +/* + * include/asm-sh/cpu-sh3/mmu_context.h + * + * Copyright (C) 1999 Niibe Yutaka + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#ifndef __ASM_CPU_SH3_MMU_CONTEXT_H +#define __ASM_CPU_SH3_MMU_CONTEXT_H + +#define MMU_PTEH 0xFFFFFFF0 /* Page table entry register HIGH */ +#define MMU_PTEL 0xFFFFFFF4 /* Page table entry register LOW */ +#define MMU_TTB 0xFFFFFFF8 /* Translation table base register */ +#define MMU_TEA 0xFFFFFFFC /* TLB Exception Address */ + +#define MMUCR 0xFFFFFFE0 /* MMU Control Register */ + +#define MMU_TLB_ADDRESS_ARRAY 0xF2000000 +#define MMU_PAGE_ASSOC_BIT 0x80 + +#define MMU_NTLB_ENTRIES 128 /* for 7708 */ +#define MMU_NTLB_WAYS 4 +#define MMU_CONTROL_INIT 0x007 /* SV=0, TF=1, IX=1, AT=1 */ + +#define TRA 0xffffffd0 +#define EXPEVT 0xffffffd4 + +#if defined(CONFIG_CPU_SUBTYPE_SH7705) || \ + defined(CONFIG_CPU_SUBTYPE_SH7706) || \ + defined(CONFIG_CPU_SUBTYPE_SH7707) || \ + defined(CONFIG_CPU_SUBTYPE_SH7709) || \ + defined(CONFIG_CPU_SUBTYPE_SH7710) || \ + defined(CONFIG_CPU_SUBTYPE_SH7712) || \ + defined(CONFIG_CPU_SUBTYPE_SH7720) || \ + defined(CONFIG_CPU_SUBTYPE_SH7721) +#define INTEVT 0xa4000000 /* INTEVTE2(0xa4000000) */ +#else +#define INTEVT 0xffffffd8 +#endif + +#endif /* __ASM_CPU_SH3_MMU_CONTEXT_H */ + diff --git a/arch/sh/include/cpu-sh3/cpu/rtc.h b/arch/sh/include/cpu-sh3/cpu/rtc.h new file mode 100644 index 00000000000..319404aaee3 --- /dev/null +++ b/arch/sh/include/cpu-sh3/cpu/rtc.h @@ -0,0 +1,8 @@ +#ifndef __ASM_SH_CPU_SH3_RTC_H +#define __ASM_SH_CPU_SH3_RTC_H + +#define rtc_reg_size sizeof(u16) +#define RTC_BIT_INVERTED 0 /* No bug on SH7708, SH7709A */ +#define RTC_DEF_CAPABILITIES 0UL + +#endif /* __ASM_SH_CPU_SH3_RTC_H */ diff --git a/arch/sh/include/cpu-sh3/cpu/sigcontext.h b/arch/sh/include/cpu-sh3/cpu/sigcontext.h new file mode 100644 index 00000000000..17310dc03dc --- /dev/null +++ b/arch/sh/include/cpu-sh3/cpu/sigcontext.h @@ -0,0 +1,17 @@ +#ifndef __ASM_CPU_SH3_SIGCONTEXT_H +#define __ASM_CPU_SH3_SIGCONTEXT_H + +struct sigcontext { + unsigned long oldmask; + + /* CPU registers */ + unsigned long sc_regs[16]; + unsigned long sc_pc; + unsigned long sc_pr; + unsigned long sc_sr; + unsigned long sc_gbr; + unsigned long sc_mach; + unsigned long sc_macl; +}; + +#endif /* __ASM_CPU_SH3_SIGCONTEXT_H */ diff --git a/arch/sh/include/cpu-sh3/cpu/timer.h b/arch/sh/include/cpu-sh3/cpu/timer.h new file mode 100644 index 00000000000..793acf12aa0 --- /dev/null +++ b/arch/sh/include/cpu-sh3/cpu/timer.h @@ -0,0 +1,67 @@ +/* + * include/asm-sh/cpu-sh3/timer.h + * + * Copyright (C) 2004 Lineo Solutions, Inc. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#ifndef __ASM_CPU_SH3_TIMER_H +#define __ASM_CPU_SH3_TIMER_H + +/* + * --------------------------------------------------------------------------- + * TMU Common definitions for SH3 processors + * SH7706 + * SH7709S + * SH7727 + * SH7729R + * SH7710 + * SH7720 + * SH7710 + * --------------------------------------------------------------------------- + */ + +#if !defined(CONFIG_CPU_SUBTYPE_SH7720) && !defined(CONFIG_CPU_SUBTYPE_SH7721) +#define TMU_TOCR 0xfffffe90 /* Byte access */ +#endif + +#if defined(CONFIG_CPU_SUBTYPE_SH7710) || \ + defined(CONFIG_CPU_SUBTYPE_SH7720) || \ + defined(CONFIG_CPU_SUBTYPE_SH7721) +#define TMU_012_TSTR 0xa412fe92 /* Byte access */ + +#define TMU0_TCOR 0xa412fe94 /* Long access */ +#define TMU0_TCNT 0xa412fe98 /* Long access */ +#define TMU0_TCR 0xa412fe9c /* Word access */ + +#define TMU1_TCOR 0xa412fea0 /* Long access */ +#define TMU1_TCNT 0xa412fea4 /* Long access */ +#define TMU1_TCR 0xa412fea8 /* Word access */ + +#define TMU2_TCOR 0xa412feac /* Long access */ +#define TMU2_TCNT 0xa412feb0 /* Long access */ +#define TMU2_TCR 0xa412feb4 /* Word access */ + +#else +#define TMU_012_TSTR 0xfffffe92 /* Byte access */ + +#define TMU0_TCOR 0xfffffe94 /* Long access */ +#define TMU0_TCNT 0xfffffe98 /* Long access */ +#define TMU0_TCR 0xfffffe9c /* Word access */ + +#define TMU1_TCOR 0xfffffea0 /* Long access */ +#define TMU1_TCNT 0xfffffea4 /* Long access */ +#define TMU1_TCR 0xfffffea8 /* Word access */ + +#define TMU2_TCOR 0xfffffeac /* Long access */ +#define TMU2_TCNT 0xfffffeb0 /* Long access */ +#define TMU2_TCR 0xfffffeb4 /* Word access */ +#if !defined(CONFIG_CPU_SUBTYPE_SH7720) && !defined(CONFIG_CPU_SUBTYPE_SH7721) +#define TMU2_TCPR2 0xfffffeb8 /* Long access */ +#endif +#endif + +#endif /* __ASM_CPU_SH3_TIMER_H */ + diff --git a/arch/sh/include/cpu-sh3/cpu/ubc.h b/arch/sh/include/cpu-sh3/cpu/ubc.h new file mode 100644 index 00000000000..4e6381d5ff7 --- /dev/null +++ b/arch/sh/include/cpu-sh3/cpu/ubc.h @@ -0,0 +1,42 @@ +/* + * include/asm-sh/cpu-sh3/ubc.h + * + * Copyright (C) 1999 Niibe Yutaka + * Copyright (C) 2003 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#ifndef __ASM_CPU_SH3_UBC_H +#define __ASM_CPU_SH3_UBC_H + +#if defined(CONFIG_CPU_SUBTYPE_SH7710) || \ + defined(CONFIG_CPU_SUBTYPE_SH7720) || \ + defined(CONFIG_CPU_SUBTYPE_SH7721) +#define UBC_BARA 0xa4ffffb0 +#define UBC_BAMRA 0xa4ffffb4 +#define UBC_BBRA 0xa4ffffb8 +#define UBC_BASRA 0xffffffe4 +#define UBC_BARB 0xa4ffffa0 +#define UBC_BAMRB 0xa4ffffa4 +#define UBC_BBRB 0xa4ffffa8 +#define UBC_BASRB 0xffffffe8 +#define UBC_BDRB 0xa4ffff90 +#define UBC_BDMRB 0xa4ffff94 +#define UBC_BRCR 0xa4ffff98 +#else +#define UBC_BARA 0xffffffb0 +#define UBC_BAMRA 0xffffffb4 +#define UBC_BBRA 0xffffffb8 +#define UBC_BASRA 0xffffffe4 +#define UBC_BARB 0xffffffa0 +#define UBC_BAMRB 0xffffffa4 +#define UBC_BBRB 0xffffffa8 +#define UBC_BASRB 0xffffffe8 +#define UBC_BDRB 0xffffff90 +#define UBC_BDMRB 0xffffff94 +#define UBC_BRCR 0xffffff98 +#endif + +#endif /* __ASM_CPU_SH3_UBC_H */ diff --git a/arch/sh/include/cpu-sh3/cpu/watchdog.h b/arch/sh/include/cpu-sh3/cpu/watchdog.h new file mode 100644 index 00000000000..4ee0347298d --- /dev/null +++ b/arch/sh/include/cpu-sh3/cpu/watchdog.h @@ -0,0 +1,25 @@ +/* + * include/asm-sh/cpu-sh3/watchdog.h + * + * Copyright (C) 2002, 2003 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#ifndef __ASM_CPU_SH3_WATCHDOG_H +#define __ASM_CPU_SH3_WATCHDOG_H + +/* Register definitions */ +#define WTCNT 0xffffff84 +#define WTCSR 0xffffff86 + +/* Bit definitions */ +#define WTCSR_TME 0x80 +#define WTCSR_WT 0x40 +#define WTCSR_RSTS 0x20 +#define WTCSR_WOVF 0x10 +#define WTCSR_IOVF 0x08 + +#endif /* __ASM_CPU_SH3_WATCHDOG_H */ + diff --git a/arch/sh/include/cpu-sh4/cpu/addrspace.h b/arch/sh/include/cpu-sh4/cpu/addrspace.h new file mode 100644 index 00000000000..a3fa733c1c7 --- /dev/null +++ b/arch/sh/include/cpu-sh4/cpu/addrspace.h @@ -0,0 +1,35 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1999 by Kaz Kojima + * + * Defitions for the address spaces of the SH-4 CPUs. + */ +#ifndef __ASM_CPU_SH4_ADDRSPACE_H +#define __ASM_CPU_SH4_ADDRSPACE_H + +#define P0SEG 0x00000000 +#define P1SEG 0x80000000 +#define P2SEG 0xa0000000 +#define P3SEG 0xc0000000 +#define P4SEG 0xe0000000 + +/* Detailed P4SEG */ +#define P4SEG_STORE_QUE (P4SEG) +#define P4SEG_IC_ADDR 0xf0000000 +#define P4SEG_IC_DATA 0xf1000000 +#define P4SEG_ITLB_ADDR 0xf2000000 +#define P4SEG_ITLB_DATA 0xf3000000 +#define P4SEG_OC_ADDR 0xf4000000 +#define P4SEG_OC_DATA 0xf5000000 +#define P4SEG_TLB_ADDR 0xf6000000 +#define P4SEG_TLB_DATA 0xf7000000 +#define P4SEG_REG_BASE 0xff000000 + +#define PA_AREA5_IO 0xb4000000 /* Area 5 IO Memory */ +#define PA_AREA6_IO 0xb8000000 /* Area 6 IO Memory */ + +#endif /* __ASM_CPU_SH4_ADDRSPACE_H */ + diff --git a/arch/sh/include/cpu-sh4/cpu/cache.h b/arch/sh/include/cpu-sh4/cpu/cache.h new file mode 100644 index 00000000000..1c61ebf5c8e --- /dev/null +++ b/arch/sh/include/cpu-sh4/cpu/cache.h @@ -0,0 +1,42 @@ +/* + * include/asm-sh/cpu-sh4/cache.h + * + * Copyright (C) 1999 Niibe Yutaka + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#ifndef __ASM_CPU_SH4_CACHE_H +#define __ASM_CPU_SH4_CACHE_H + +#define L1_CACHE_SHIFT 5 + +#define SH_CACHE_VALID 1 +#define SH_CACHE_UPDATED 2 +#define SH_CACHE_COMBINED 4 +#define SH_CACHE_ASSOC 8 + +#define CCR 0xff00001c /* Address of Cache Control Register */ +#define CCR_CACHE_OCE 0x0001 /* Operand Cache Enable */ +#define CCR_CACHE_WT 0x0002 /* Write-Through (for P0,U0,P3) (else writeback)*/ +#define CCR_CACHE_CB 0x0004 /* Copy-Back (for P1) (else writethrough) */ +#define CCR_CACHE_OCI 0x0008 /* OC Invalidate */ +#define CCR_CACHE_ORA 0x0020 /* OC RAM Mode */ +#define CCR_CACHE_OIX 0x0080 /* OC Index Enable */ +#define CCR_CACHE_ICE 0x0100 /* Instruction Cache Enable */ +#define CCR_CACHE_ICI 0x0800 /* IC Invalidate */ +#define CCR_CACHE_IIX 0x8000 /* IC Index Enable */ +#ifndef CONFIG_CPU_SH4A +#define CCR_CACHE_EMODE 0x80000000 /* EMODE Enable */ +#endif + +/* Default CCR setup: 8k+16k-byte cache,P1-wb,enable */ +#define CCR_CACHE_ENABLE (CCR_CACHE_OCE|CCR_CACHE_ICE) +#define CCR_CACHE_INVALIDATE (CCR_CACHE_OCI|CCR_CACHE_ICI) + +#define CACHE_IC_ADDRESS_ARRAY 0xf0000000 +#define CACHE_OC_ADDRESS_ARRAY 0xf4000000 + +#endif /* __ASM_CPU_SH4_CACHE_H */ + diff --git a/arch/sh/include/cpu-sh4/cpu/cacheflush.h b/arch/sh/include/cpu-sh4/cpu/cacheflush.h new file mode 100644 index 00000000000..065306d376e --- /dev/null +++ b/arch/sh/include/cpu-sh4/cpu/cacheflush.h @@ -0,0 +1,43 @@ +/* + * include/asm-sh/cpu-sh4/cacheflush.h + * + * Copyright (C) 1999 Niibe Yutaka + * Copyright (C) 2003 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#ifndef __ASM_CPU_SH4_CACHEFLUSH_H +#define __ASM_CPU_SH4_CACHEFLUSH_H + +/* + * Caches are broken on SH-4 (unless we use write-through + * caching; in which case they're only semi-broken), + * so we need them. + */ +void flush_cache_all(void); +void flush_dcache_all(void); +void flush_cache_mm(struct mm_struct *mm); +#define flush_cache_dup_mm(mm) flush_cache_mm(mm) +void flush_cache_range(struct vm_area_struct *vma, unsigned long start, + unsigned long end); +void flush_cache_page(struct vm_area_struct *vma, unsigned long addr, + unsigned long pfn); +void flush_dcache_page(struct page *pg); + +#define flush_dcache_mmap_lock(mapping) do { } while (0) +#define flush_dcache_mmap_unlock(mapping) do { } while (0) + +void flush_icache_range(unsigned long start, unsigned long end); +void flush_icache_user_range(struct vm_area_struct *vma, struct page *page, + unsigned long addr, int len); + +#define flush_icache_page(vma,pg) do { } while (0) + +/* Initialization of P3 area for copy_user_page */ +void p3_cache_init(void); + +#define PG_mapped PG_arch_1 + +#endif /* __ASM_CPU_SH4_CACHEFLUSH_H */ diff --git a/arch/sh/include/cpu-sh4/cpu/dma-sh7780.h b/arch/sh/include/cpu-sh4/cpu/dma-sh7780.h new file mode 100644 index 00000000000..71b426a6e48 --- /dev/null +++ b/arch/sh/include/cpu-sh4/cpu/dma-sh7780.h @@ -0,0 +1,39 @@ +#ifndef __ASM_SH_CPU_SH4_DMA_SH7780_H +#define __ASM_SH_CPU_SH4_DMA_SH7780_H + +#define REQ_HE 0x000000C0 +#define REQ_H 0x00000080 +#define REQ_LE 0x00000040 +#define TM_BURST 0x0000020 +#define TS_8 0x00000000 +#define TS_16 0x00000008 +#define TS_32 0x00000010 +#define TS_16BLK 0x00000018 +#define TS_32BLK 0x00100000 + +/* + * The SuperH DMAC supports a number of transmit sizes, we list them here, + * with their respective values as they appear in the CHCR registers. + * + * Defaults to a 64-bit transfer size. + */ +enum { + XMIT_SZ_8BIT, + XMIT_SZ_16BIT, + XMIT_SZ_32BIT, + XMIT_SZ_128BIT, + XMIT_SZ_256BIT, +}; + +/* + * The DMA count is defined as the number of bytes to transfer. + */ +static unsigned int ts_shift[] __maybe_unused = { + [XMIT_SZ_8BIT] = 0, + [XMIT_SZ_16BIT] = 1, + [XMIT_SZ_32BIT] = 2, + [XMIT_SZ_128BIT] = 4, + [XMIT_SZ_256BIT] = 5, +}; + +#endif /* __ASM_SH_CPU_SH4_DMA_SH7780_H */ diff --git a/arch/sh/include/cpu-sh4/cpu/dma.h b/arch/sh/include/cpu-sh4/cpu/dma.h new file mode 100644 index 00000000000..235b7cd1fc9 --- /dev/null +++ b/arch/sh/include/cpu-sh4/cpu/dma.h @@ -0,0 +1,65 @@ +#ifndef __ASM_CPU_SH4_DMA_H +#define __ASM_CPU_SH4_DMA_H + +#define DMAOR_INIT ( 0x8000 | DMAOR_DME ) + +/* SH7751/7760/7780 DMA IRQ sources */ +#define DMTE0_IRQ 34 +#define DMTE1_IRQ 35 +#define DMTE2_IRQ 36 +#define DMTE3_IRQ 37 +#define DMTE4_IRQ 44 +#define DMTE5_IRQ 45 +#define DMTE6_IRQ 46 +#define DMTE7_IRQ 47 +#define DMAE_IRQ 38 + +#ifdef CONFIG_CPU_SH4A +#define SH_DMAC_BASE 0xfc808020 + +#define CHCR_TS_MASK 0x18 +#define CHCR_TS_SHIFT 3 + +#include +#else +#define SH_DMAC_BASE 0xffa00000 + +/* Definitions for the SuperH DMAC */ +#define TM_BURST 0x0000080 +#define TS_8 0x00000010 +#define TS_16 0x00000020 +#define TS_32 0x00000030 +#define TS_64 0x00000000 + +#define CHCR_TS_MASK 0x70 +#define CHCR_TS_SHIFT 4 + +#define DMAOR_COD 0x00000008 + +/* + * The SuperH DMAC supports a number of transmit sizes, we list them here, + * with their respective values as they appear in the CHCR registers. + * + * Defaults to a 64-bit transfer size. + */ +enum { + XMIT_SZ_64BIT, + XMIT_SZ_8BIT, + XMIT_SZ_16BIT, + XMIT_SZ_32BIT, + XMIT_SZ_256BIT, +}; + +/* + * The DMA count is defined as the number of bytes to transfer. + */ +static unsigned int ts_shift[] __maybe_unused = { + [XMIT_SZ_64BIT] = 3, + [XMIT_SZ_8BIT] = 0, + [XMIT_SZ_16BIT] = 1, + [XMIT_SZ_32BIT] = 2, + [XMIT_SZ_256BIT] = 5, +}; +#endif + +#endif /* __ASM_CPU_SH4_DMA_H */ diff --git a/arch/sh/include/cpu-sh4/cpu/fpu.h b/arch/sh/include/cpu-sh4/cpu/fpu.h new file mode 100644 index 00000000000..febef734252 --- /dev/null +++ b/arch/sh/include/cpu-sh4/cpu/fpu.h @@ -0,0 +1,32 @@ +/* + * linux/arch/sh/kernel/cpu/sh4/sh4_fpu.h + * + * Copyright (C) 2006 STMicroelectronics Limited + * Author: Carl Shaw + * + * May be copied or modified under the terms of the GNU General Public + * License Version 2. See linux/COPYING for more information. + * + * Definitions for SH4 FPU operations + */ + +#ifndef __CPU_SH4_FPU_H +#define __CPU_SH4_FPU_H + +#define FPSCR_ENABLE_MASK 0x00000f80UL + +#define FPSCR_FMOV_DOUBLE (1<<1) + +#define FPSCR_CAUSE_INEXACT (1<<12) +#define FPSCR_CAUSE_UNDERFLOW (1<<13) +#define FPSCR_CAUSE_OVERFLOW (1<<14) +#define FPSCR_CAUSE_DIVZERO (1<<15) +#define FPSCR_CAUSE_INVALID (1<<16) +#define FPSCR_CAUSE_ERROR (1<<17) + +#define FPSCR_DBL_PRECISION (1<<19) +#define FPSCR_ROUNDING_MODE(x) ((x >> 20) & 3) +#define FPSCR_RM_NEAREST (0) +#define FPSCR_RM_ZERO (1) + +#endif diff --git a/arch/sh/include/cpu-sh4/cpu/freq.h b/arch/sh/include/cpu-sh4/cpu/freq.h new file mode 100644 index 00000000000..c23af81c2e7 --- /dev/null +++ b/arch/sh/include/cpu-sh4/cpu/freq.h @@ -0,0 +1,44 @@ +/* + * include/asm-sh/cpu-sh4/freq.h + * + * Copyright (C) 2002, 2003 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#ifndef __ASM_CPU_SH4_FREQ_H +#define __ASM_CPU_SH4_FREQ_H + +#if defined(CONFIG_CPU_SUBTYPE_SH7722) || \ + defined(CONFIG_CPU_SUBTYPE_SH7723) || \ + defined(CONFIG_CPU_SUBTYPE_SH7343) || \ + defined(CONFIG_CPU_SUBTYPE_SH7366) +#define FRQCR 0xa4150000 +#define VCLKCR 0xa4150004 +#define SCLKACR 0xa4150008 +#define SCLKBCR 0xa415000c +#define IrDACLKCR 0xa4150010 +#define MSTPCR0 0xa4150030 +#define MSTPCR1 0xa4150034 +#define MSTPCR2 0xa4150038 +#elif defined(CONFIG_CPU_SUBTYPE_SH7763) || \ + defined(CONFIG_CPU_SUBTYPE_SH7780) +#define FRQCR 0xffc80000 +#elif defined(CONFIG_CPU_SUBTYPE_SH7785) +#define FRQCR0 0xffc80000 +#define FRQCR1 0xffc80004 +#define FRQMR1 0xffc80014 +#elif defined(CONFIG_CPU_SUBTYPE_SHX3) +#define FRQCR 0xffc00014 +#else +#define FRQCR 0xffc00000 +#define FRQCR_PSTBY 0x0200 +#define FRQCR_PLLEN 0x0400 +#define FRQCR_CKOEN 0x0800 +#endif +#define MIN_DIVISOR_NR 0 +#define MAX_DIVISOR_NR 3 + +#endif /* __ASM_CPU_SH4_FREQ_H */ + diff --git a/arch/sh/include/cpu-sh4/cpu/mmu_context.h b/arch/sh/include/cpu-sh4/cpu/mmu_context.h new file mode 100644 index 00000000000..9ea8eb27b18 --- /dev/null +++ b/arch/sh/include/cpu-sh4/cpu/mmu_context.h @@ -0,0 +1,63 @@ +/* + * include/asm-sh/cpu-sh4/mmu_context.h + * + * Copyright (C) 1999 Niibe Yutaka + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#ifndef __ASM_CPU_SH4_MMU_CONTEXT_H +#define __ASM_CPU_SH4_MMU_CONTEXT_H + +#define MMU_PTEH 0xFF000000 /* Page table entry register HIGH */ +#define MMU_PTEL 0xFF000004 /* Page table entry register LOW */ +#define MMU_TTB 0xFF000008 /* Translation table base register */ +#define MMU_TEA 0xFF00000C /* TLB Exception Address */ +#define MMU_PTEA 0xFF000034 /* Page table entry assistance register */ + +#define MMUCR 0xFF000010 /* MMU Control Register */ + +#define MMU_ITLB_ADDRESS_ARRAY 0xF2000000 +#define MMU_UTLB_ADDRESS_ARRAY 0xF6000000 +#define MMU_PAGE_ASSOC_BIT 0x80 + +#define MMUCR_TI (1<<2) + +#ifdef CONFIG_X2TLB +#define MMUCR_ME (1 << 7) +#else +#define MMUCR_ME (0) +#endif + +#if defined(CONFIG_32BIT) && defined(CONFIG_CPU_SUBTYPE_ST40) +#define MMUCR_SE (1 << 4) +#else +#define MMUCR_SE (0) +#endif + +#ifdef CONFIG_SH_STORE_QUEUES +#define MMUCR_SQMD (1 << 9) +#else +#define MMUCR_SQMD (0) +#endif + +#define MMU_NTLB_ENTRIES 64 +#define MMU_CONTROL_INIT (0x05|MMUCR_SQMD|MMUCR_ME|MMUCR_SE) + +#define MMU_ITLB_DATA_ARRAY 0xF3000000 +#define MMU_UTLB_DATA_ARRAY 0xF7000000 + +#define MMU_UTLB_ENTRIES 64 +#define MMU_U_ENTRY_SHIFT 8 +#define MMU_UTLB_VALID 0x100 +#define MMU_ITLB_ENTRIES 4 +#define MMU_I_ENTRY_SHIFT 8 +#define MMU_ITLB_VALID 0x100 + +#define TRA 0xff000020 +#define EXPEVT 0xff000024 +#define INTEVT 0xff000028 + +#endif /* __ASM_CPU_SH4_MMU_CONTEXT_H */ + diff --git a/arch/sh/include/cpu-sh4/cpu/rtc.h b/arch/sh/include/cpu-sh4/cpu/rtc.h new file mode 100644 index 00000000000..25b1e6adfe8 --- /dev/null +++ b/arch/sh/include/cpu-sh4/cpu/rtc.h @@ -0,0 +1,13 @@ +#ifndef __ASM_SH_CPU_SH4_RTC_H +#define __ASM_SH_CPU_SH4_RTC_H + +#ifdef CONFIG_CPU_SUBTYPE_SH7723 +#define rtc_reg_size sizeof(u16) +#else +#define rtc_reg_size sizeof(u32) +#endif + +#define RTC_BIT_INVERTED 0x40 /* bug on SH7750, SH7750S */ +#define RTC_DEF_CAPABILITIES RTC_CAP_4_DIGIT_YEAR + +#endif /* __ASM_SH_CPU_SH4_RTC_H */ diff --git a/arch/sh/include/cpu-sh4/cpu/sigcontext.h b/arch/sh/include/cpu-sh4/cpu/sigcontext.h new file mode 100644 index 00000000000..ab392f120e0 --- /dev/null +++ b/arch/sh/include/cpu-sh4/cpu/sigcontext.h @@ -0,0 +1,24 @@ +#ifndef __ASM_CPU_SH4_SIGCONTEXT_H +#define __ASM_CPU_SH4_SIGCONTEXT_H + +struct sigcontext { + unsigned long oldmask; + + /* CPU registers */ + unsigned long sc_regs[16]; + unsigned long sc_pc; + unsigned long sc_pr; + unsigned long sc_sr; + unsigned long sc_gbr; + unsigned long sc_mach; + unsigned long sc_macl; + + /* FPU registers */ + unsigned long sc_fpregs[16]; + unsigned long sc_xfpregs[16]; + unsigned int sc_fpscr; + unsigned int sc_fpul; + unsigned int sc_ownedfp; +}; + +#endif /* __ASM_CPU_SH4_SIGCONTEXT_H */ diff --git a/arch/sh/include/cpu-sh4/cpu/sq.h b/arch/sh/include/cpu-sh4/cpu/sq.h new file mode 100644 index 00000000000..586d6491816 --- /dev/null +++ b/arch/sh/include/cpu-sh4/cpu/sq.h @@ -0,0 +1,35 @@ +/* + * include/asm-sh/cpu-sh4/sq.h + * + * Copyright (C) 2001, 2002, 2003 Paul Mundt + * Copyright (C) 2001, 2002 M. R. Brown + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#ifndef __ASM_CPU_SH4_SQ_H +#define __ASM_CPU_SH4_SQ_H + +#include + +/* + * Store queues range from e0000000-e3fffffc, allowing approx. 64MB to be + * mapped to any physical address space. Since data is written (and aligned) + * to 32-byte boundaries, we need to be sure that all allocations are aligned. + */ +#define SQ_SIZE 32 +#define SQ_ALIGN_MASK (~(SQ_SIZE - 1)) +#define SQ_ALIGN(addr) (((addr)+SQ_SIZE-1) & SQ_ALIGN_MASK) + +#define SQ_QACR0 (P4SEG_REG_BASE + 0x38) +#define SQ_QACR1 (P4SEG_REG_BASE + 0x3c) +#define SQ_ADDRMAX (P4SEG_STORE_QUE + 0x04000000) + +/* arch/sh/kernel/cpu/sh4/sq.c */ +unsigned long sq_remap(unsigned long phys, unsigned int size, + const char *name, unsigned long flags); +void sq_unmap(unsigned long vaddr); +void sq_flush_range(unsigned long start, unsigned int len); + +#endif /* __ASM_CPU_SH4_SQ_H */ diff --git a/arch/sh/include/cpu-sh4/cpu/timer.h b/arch/sh/include/cpu-sh4/cpu/timer.h new file mode 100644 index 00000000000..d1e796b9688 --- /dev/null +++ b/arch/sh/include/cpu-sh4/cpu/timer.h @@ -0,0 +1,60 @@ +/* + * include/asm-sh/cpu-sh4/timer.h + * + * Copyright (C) 2004 Lineo Solutions, Inc. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#ifndef __ASM_CPU_SH4_TIMER_H +#define __ASM_CPU_SH4_TIMER_H + +/* + * --------------------------------------------------------------------------- + * TMU Common definitions for SH4 processors + * SH7750S/SH7750R + * SH7751/SH7751R + * SH7760 + * SH-X3 + * --------------------------------------------------------------------------- + */ +#ifdef CONFIG_CPU_SUBTYPE_SHX3 +#define TMU_012_BASE 0xffc10000 +#define TMU_345_BASE 0xffc20000 +#else +#define TMU_012_BASE 0xffd80000 +#define TMU_345_BASE 0xfe100000 +#endif + +#define TMU_TOCR TMU_012_BASE /* Not supported on all CPUs */ + +#define TMU_012_TSTR (TMU_012_BASE + 0x04) +#define TMU_345_TSTR (TMU_345_BASE + 0x04) + +#define TMU0_TCOR (TMU_012_BASE + 0x08) +#define TMU0_TCNT (TMU_012_BASE + 0x0c) +#define TMU0_TCR (TMU_012_BASE + 0x10) + +#define TMU1_TCOR (TMU_012_BASE + 0x14) +#define TMU1_TCNT (TMU_012_BASE + 0x18) +#define TMU1_TCR (TMU_012_BASE + 0x1c) + +#define TMU2_TCOR (TMU_012_BASE + 0x20) +#define TMU2_TCNT (TMU_012_BASE + 0x24) +#define TMU2_TCR (TMU_012_BASE + 0x28) +#define TMU2_TCPR (TMU_012_BASE + 0x2c) + +#define TMU3_TCOR (TMU_345_BASE + 0x08) +#define TMU3_TCNT (TMU_345_BASE + 0x0c) +#define TMU3_TCR (TMU_345_BASE + 0x10) + +#define TMU4_TCOR (TMU_345_BASE + 0x14) +#define TMU4_TCNT (TMU_345_BASE + 0x18) +#define TMU4_TCR (TMU_345_BASE + 0x1c) + +#define TMU5_TCOR (TMU_345_BASE + 0x20) +#define TMU5_TCNT (TMU_345_BASE + 0x24) +#define TMU5_TCR (TMU_345_BASE + 0x28) + +#endif /* __ASM_CPU_SH4_TIMER_H */ diff --git a/arch/sh/include/cpu-sh4/cpu/ubc.h b/arch/sh/include/cpu-sh4/cpu/ubc.h new file mode 100644 index 00000000000..c86e1705093 --- /dev/null +++ b/arch/sh/include/cpu-sh4/cpu/ubc.h @@ -0,0 +1,64 @@ +/* + * include/asm-sh/cpu-sh4/ubc.h + * + * Copyright (C) 1999 Niibe Yutaka + * Copyright (C) 2003 Paul Mundt + * Copyright (C) 2006 Lineo Solutions Inc. support SH4A UBC + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#ifndef __ASM_CPU_SH4_UBC_H +#define __ASM_CPU_SH4_UBC_H + +#if defined(CONFIG_CPU_SH4A) +#define UBC_CBR0 0xff200000 +#define UBC_CRR0 0xff200004 +#define UBC_CAR0 0xff200008 +#define UBC_CAMR0 0xff20000c +#define UBC_CBR1 0xff200020 +#define UBC_CRR1 0xff200024 +#define UBC_CAR1 0xff200028 +#define UBC_CAMR1 0xff20002c +#define UBC_CDR1 0xff200030 +#define UBC_CDMR1 0xff200034 +#define UBC_CETR1 0xff200038 +#define UBC_CCMFR 0xff200600 +#define UBC_CBCR 0xff200620 + +/* CBR */ +#define UBC_CBR_AIE (0x01<<30) +#define UBC_CBR_ID_INST (0x01<<4) +#define UBC_CBR_RW_READ (0x01<<1) +#define UBC_CBR_CE (0x01) + +#define UBC_CBR_AIV_MASK (0x00FF0000) +#define UBC_CBR_AIV_SHIFT (16) +#define UBC_CBR_AIV_SET(asid) (((asid)<| + * +-----------------------------+-----------------+------+----------+------+ + * | | | ways |set index |offset| + * +-----------------------------+-----------------+------+----------+------+ + * ^ 2 bits 8 bits 5 bits + * +- Bit 31 + * + * Cacheline size is based on offset: 5 bits = 32 bytes per line + * A cache line is identified by a tag + set but OCACHETAG/ICACHETAG + * have a broader space for registers. These are outlined by + * CACHE_?C_*_STEP below. + * + */ + +/* Instruction cache */ +#define CACHE_IC_ADDRESS_ARRAY 0x01000000 + +/* Operand Cache */ +#define CACHE_OC_ADDRESS_ARRAY 0x01800000 + +/* These declarations relate to cache 'synonyms' in the operand cache. A + 'synonym' occurs where effective address bits overlap between those used for + indexing the cache sets and those passed to the MMU for translation. In the + case of SH5-101 & SH5-103, only bit 12 is affected for 4k pages. */ + +#define CACHE_OC_N_SYNBITS 1 /* Number of synonym bits */ +#define CACHE_OC_SYN_SHIFT 12 +/* Mask to select synonym bit(s) */ +#define CACHE_OC_SYN_MASK (((1UL<). +** Assigns symbolic names to control & target registers. +*/ + +/* + * Define some useful aliases for control registers. + */ +#define SR cr0 +#define SSR cr1 +#define PSSR cr2 + /* cr3 UNDEFINED */ +#define INTEVT cr4 +#define EXPEVT cr5 +#define PEXPEVT cr6 +#define TRA cr7 +#define SPC cr8 +#define PSPC cr9 +#define RESVEC cr10 +#define VBR cr11 + /* cr12 UNDEFINED */ +#define TEA cr13 + /* cr14-cr15 UNDEFINED */ +#define DCR cr16 +#define KCR0 cr17 +#define KCR1 cr18 + /* cr19-cr31 UNDEFINED */ + /* cr32-cr61 RESERVED */ +#define CTC cr62 +#define USR cr63 + +/* + * ABI dependent registers (general purpose set) + */ +#define RET r2 +#define ARG1 r2 +#define ARG2 r3 +#define ARG3 r4 +#define ARG4 r5 +#define ARG5 r6 +#define ARG6 r7 +#define SP r15 +#define LINK r18 +#define ZERO r63 + +/* + * Status register defines: used only by assembly sources (and + * syntax independednt) + */ +#define SR_RESET_VAL 0x0000000050008000 +#define SR_HARMLESS 0x00000000500080f0 /* Write ignores for most */ +#define SR_ENABLE_FPU 0xffffffffffff7fff /* AND with this */ + +#if defined (CONFIG_SH64_SR_WATCH) +#define SR_ENABLE_MMU 0x0000000084000000 /* OR with this */ +#else +#define SR_ENABLE_MMU 0x0000000080000000 /* OR with this */ +#endif + +#define SR_UNBLOCK_EXC 0xffffffffefffffff /* AND with this */ +#define SR_BLOCK_EXC 0x0000000010000000 /* OR with this */ + +#else /* Not __ASSEMBLY__ syntax */ + +/* +** Stringify reg. name +*/ +#define __str(x) #x + +/* Stringify control register names for use in inline assembly */ +#define __SR __str(SR) +#define __SSR __str(SSR) +#define __PSSR __str(PSSR) +#define __INTEVT __str(INTEVT) +#define __EXPEVT __str(EXPEVT) +#define __PEXPEVT __str(PEXPEVT) +#define __TRA __str(TRA) +#define __SPC __str(SPC) +#define __PSPC __str(PSPC) +#define __RESVEC __str(RESVEC) +#define __VBR __str(VBR) +#define __TEA __str(TEA) +#define __DCR __str(DCR) +#define __KCR0 __str(KCR0) +#define __KCR1 __str(KCR1) +#define __CTC __str(CTC) +#define __USR __str(USR) + +#endif /* __ASSEMBLY__ */ +#endif /* __ASM_SH_CPU_SH5_REGISTERS_H */ diff --git a/arch/sh/include/cpu-sh5/cpu/rtc.h b/arch/sh/include/cpu-sh5/cpu/rtc.h new file mode 100644 index 00000000000..12ea0ed144e --- /dev/null +++ b/arch/sh/include/cpu-sh5/cpu/rtc.h @@ -0,0 +1,8 @@ +#ifndef __ASM_SH_CPU_SH5_RTC_H +#define __ASM_SH_CPU_SH5_RTC_H + +#define rtc_reg_size sizeof(u32) +#define RTC_BIT_INVERTED 0 /* The SH-5 RTC is surprisingly sane! */ +#define RTC_DEF_CAPABILITIES RTC_CAP_4_DIGIT_YEAR + +#endif /* __ASM_SH_CPU_SH5_RTC_H */ diff --git a/arch/sh/include/cpu-sh5/cpu/timer.h b/arch/sh/include/cpu-sh5/cpu/timer.h new file mode 100644 index 00000000000..88da9b341a3 --- /dev/null +++ b/arch/sh/include/cpu-sh5/cpu/timer.h @@ -0,0 +1,4 @@ +#ifndef __ASM_SH_CPU_SH5_TIMER_H +#define __ASM_SH_CPU_SH5_TIMER_H + +#endif /* __ASM_SH_CPU_SH5_TIMER_H */ diff --git a/arch/sh/include/mach-dreamcast/mach/dma.h b/arch/sh/include/mach-dreamcast/mach/dma.h new file mode 100644 index 00000000000..ddd68e78870 --- /dev/null +++ b/arch/sh/include/mach-dreamcast/mach/dma.h @@ -0,0 +1,34 @@ +/* + * include/asm-sh/dreamcast/dma.h + * + * Copyright (C) 2003 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#ifndef __ASM_SH_DREAMCAST_DMA_H +#define __ASM_SH_DREAMCAST_DMA_H + +/* Number of DMA channels */ +#define ONCHIP_NR_DMA_CHANNELS 4 +#define G2_NR_DMA_CHANNELS 4 +#define PVR2_NR_DMA_CHANNELS 1 + +/* Channels for cascading */ +#define PVR2_CASCADE_CHAN 2 +#define G2_CASCADE_CHAN 3 + +/* PVR2 DMA Registers */ +#define PVR2_DMA_BASE 0xa05f6800 +#define PVR2_DMA_ADDR (PVR2_DMA_BASE + 0) +#define PVR2_DMA_COUNT (PVR2_DMA_BASE + 4) +#define PVR2_DMA_MODE (PVR2_DMA_BASE + 8) +#define PVR2_DMA_LMMODE0 (PVR2_DMA_BASE + 132) +#define PVR2_DMA_LMMODE1 (PVR2_DMA_BASE + 136) + +/* G2 DMA Register */ +#define G2_DMA_BASE 0xa05f7800 + +#endif /* __ASM_SH_DREAMCAST_DMA_H */ + diff --git a/arch/sh/include/mach-dreamcast/mach/maple.h b/arch/sh/include/mach-dreamcast/mach/maple.h new file mode 100644 index 00000000000..51f6a87f1f1 --- /dev/null +++ b/arch/sh/include/mach-dreamcast/mach/maple.h @@ -0,0 +1,37 @@ +#ifndef __ASM_MAPLE_H +#define __ASM_MAPLE_H + +#define MAPLE_PORTS 4 +#define MAPLE_PNP_INTERVAL HZ +#define MAPLE_MAXPACKETS 8 +#define MAPLE_DMA_ORDER 14 +#define MAPLE_DMA_SIZE (1 << MAPLE_DMA_ORDER) +#define MAPLE_DMA_PAGES ((MAPLE_DMA_ORDER > PAGE_SHIFT) ? \ + MAPLE_DMA_ORDER - PAGE_SHIFT : 0) + +/* Maple Bus registers */ +#define MAPLE_BASE 0xa05f6c00 +#define MAPLE_DMAADDR (MAPLE_BASE+0x04) +#define MAPLE_TRIGTYPE (MAPLE_BASE+0x10) +#define MAPLE_ENABLE (MAPLE_BASE+0x14) +#define MAPLE_STATE (MAPLE_BASE+0x18) +#define MAPLE_SPEED (MAPLE_BASE+0x80) +#define MAPLE_RESET (MAPLE_BASE+0x8c) + +#define MAPLE_MAGIC 0x6155404f +#define MAPLE_2MBPS 0 +#define MAPLE_TIMEOUT(n) ((n)<<15) + +/* Function codes */ +#define MAPLE_FUNC_CONTROLLER 0x001 +#define MAPLE_FUNC_MEMCARD 0x002 +#define MAPLE_FUNC_LCD 0x004 +#define MAPLE_FUNC_CLOCK 0x008 +#define MAPLE_FUNC_MICROPHONE 0x010 +#define MAPLE_FUNC_ARGUN 0x020 +#define MAPLE_FUNC_KEYBOARD 0x040 +#define MAPLE_FUNC_LIGHTGUN 0x080 +#define MAPLE_FUNC_PURUPURU 0x100 +#define MAPLE_FUNC_MOUSE 0x200 + +#endif /* __ASM_MAPLE_H */ diff --git a/arch/sh/include/mach-dreamcast/mach/pci.h b/arch/sh/include/mach-dreamcast/mach/pci.h new file mode 100644 index 00000000000..9264ff46c63 --- /dev/null +++ b/arch/sh/include/mach-dreamcast/mach/pci.h @@ -0,0 +1,25 @@ +/* + * include/asm-sh/dreamcast/pci.h + * + * Copyright (C) 2001, 2002 M. R. Brown + * Copyright (C) 2002, 2003 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#ifndef __ASM_SH_DREAMCAST_PCI_H +#define __ASM_SH_DREAMCAST_PCI_H + +#include + +#define GAPSPCI_REGS 0x01001400 +#define GAPSPCI_DMA_BASE 0x01840000 +#define GAPSPCI_DMA_SIZE 32768 +#define GAPSPCI_BBA_CONFIG 0x01001600 +#define GAPSPCI_BBA_CONFIG_SIZE 0x2000 + +#define GAPSPCI_IRQ HW_EVENT_EXTERNAL + +#endif /* __ASM_SH_DREAMCAST_PCI_H */ + diff --git a/arch/sh/include/mach-dreamcast/mach/sysasic.h b/arch/sh/include/mach-dreamcast/mach/sysasic.h new file mode 100644 index 00000000000..f33426608a8 --- /dev/null +++ b/arch/sh/include/mach-dreamcast/mach/sysasic.h @@ -0,0 +1,43 @@ +/* include/asm-sh/dreamcast/sysasic.h + * + * Definitions for the Dreamcast System ASIC and related peripherals. + * + * Copyright (c) 2001 M. R. Brown + * Copyright (C) 2003 Paul Mundt + * + * This file is part of the LinuxDC project (www.linuxdc.org) + * + * Released under the terms of the GNU GPL v2.0. + * + */ +#ifndef __ASM_SH_DREAMCAST_SYSASIC_H +#define __ASM_SH_DREAMCAST_SYSASIC_H + +#include + +/* Hardware events - + + Each of these events correspond to a bit within the Event Mask Registers/ + Event Status Registers. Because of the virtual IRQ numbering scheme, a + base offset must be used when calculating the virtual IRQ that each event + takes. +*/ + +#define HW_EVENT_IRQ_BASE 48 + +/* IRQ 13 */ +#define HW_EVENT_VSYNC (HW_EVENT_IRQ_BASE + 5) /* VSync */ +#define HW_EVENT_MAPLE_DMA (HW_EVENT_IRQ_BASE + 12) /* Maple DMA complete */ +#define HW_EVENT_GDROM_DMA (HW_EVENT_IRQ_BASE + 14) /* GD-ROM DMA complete */ +#define HW_EVENT_G2_DMA (HW_EVENT_IRQ_BASE + 15) /* G2 DMA complete */ +#define HW_EVENT_PVR2_DMA (HW_EVENT_IRQ_BASE + 19) /* PVR2 DMA complete */ + +/* IRQ 11 */ +#define HW_EVENT_GDROM_CMD (HW_EVENT_IRQ_BASE + 32) /* GD-ROM cmd. complete */ +#define HW_EVENT_AICA_SYS (HW_EVENT_IRQ_BASE + 33) /* AICA-related */ +#define HW_EVENT_EXTERNAL (HW_EVENT_IRQ_BASE + 35) /* Ext. (expansion) */ + +#define HW_EVENT_IRQ_MAX (HW_EVENT_IRQ_BASE + 95) + +#endif /* __ASM_SH_DREAMCAST_SYSASIC_H */ + diff --git a/arch/sh/include/mach-landisk/mach/gio.h b/arch/sh/include/mach-landisk/mach/gio.h new file mode 100644 index 00000000000..35d7368b718 --- /dev/null +++ b/arch/sh/include/mach-landisk/mach/gio.h @@ -0,0 +1,37 @@ +#ifndef __ASM_SH_LANDISK_GIO_H +#define __ASM_SH_LANDISK_GIO_H + +#include + +/* version */ +#define VERSION_STR "1.00" + +/* Driver name */ +#define GIO_DRIVER_NAME "/dev/giodrv" + +/* Use 'k' as magic number */ +#define GIODRV_IOC_MAGIC 'k' + +#define GIODRV_IOCRESET _IO(GIODRV_IOC_MAGIC, 0) +/* + * S means "Set" through a ptr, + * T means "Tell" directly + * G means "Get" (to a pointed var) + * Q means "Query", response is on the return value + * X means "eXchange": G and S atomically + * H means "sHift": T and Q atomically + */ +#define GIODRV_IOCSGIODATA1 _IOW(GIODRV_IOC_MAGIC, 1, unsigned char *) +#define GIODRV_IOCGGIODATA1 _IOR(GIODRV_IOC_MAGIC, 2, unsigned char *) +#define GIODRV_IOCSGIODATA2 _IOW(GIODRV_IOC_MAGIC, 3, unsigned short *) +#define GIODRV_IOCGGIODATA2 _IOR(GIODRV_IOC_MAGIC, 4, unsigned short *) +#define GIODRV_IOCSGIODATA4 _IOW(GIODRV_IOC_MAGIC, 5, unsigned long *) +#define GIODRV_IOCGGIODATA4 _IOR(GIODRV_IOC_MAGIC, 6, unsigned long *) +#define GIODRV_IOCSGIOSETADDR _IOW(GIODRV_IOC_MAGIC, 7, unsigned long *) +#define GIODRV_IOCHARDRESET _IO(GIODRV_IOC_MAGIC, 8) /* debugging tool */ +#define GIODRV_IOC_MAXNR 8 + +#define GIO_READ 0x00000000 +#define GIO_WRITE 0x00000001 + +#endif /* __ASM_SH_LANDISK_GIO_H */ diff --git a/arch/sh/include/mach-landisk/mach/iodata_landisk.h b/arch/sh/include/mach-landisk/mach/iodata_landisk.h new file mode 100644 index 00000000000..6fb04ab38b9 --- /dev/null +++ b/arch/sh/include/mach-landisk/mach/iodata_landisk.h @@ -0,0 +1,42 @@ +#ifndef __ASM_SH_IODATA_LANDISK_H +#define __ASM_SH_IODATA_LANDISK_H + +/* + * linux/include/asm-sh/landisk/iodata_landisk.h + * + * Copyright (C) 2000 Atom Create Engineering Co., Ltd. + * + * IO-DATA LANDISK support + */ + +/* Box specific addresses. */ + +#define PA_USB 0xa4000000 /* USB Controller M66590 */ + +#define PA_ATARST 0xb0000000 /* ATA/FATA Access Control Register */ +#define PA_LED 0xb0000001 /* LED Control Register */ +#define PA_STATUS 0xb0000002 /* Switch Status Register */ +#define PA_SHUTDOWN 0xb0000003 /* Shutdown Control Register */ +#define PA_PCIPME 0xb0000004 /* PCI PME Status Register */ +#define PA_IMASK 0xb0000005 /* Interrupt Mask Register */ +/* 2003.10.31 I-O DATA NSD NWG add. for shutdown port clear */ +#define PA_PWRINT_CLR 0xb0000006 /* Shutdown Interrupt clear Register */ + +#define PA_PIDE_OFFSET 0x40 /* CF IDE Offset */ +#define PA_SIDE_OFFSET 0x40 /* HDD IDE Offset */ + +#define IRQ_PCIINTA 5 /* PCI INTA IRQ */ +#define IRQ_PCIINTB 6 /* PCI INTB IRQ */ +#define IRQ_PCIINDC 7 /* PCI INTC IRQ */ +#define IRQ_PCIINTD 8 /* PCI INTD IRQ */ +#define IRQ_ATA 9 /* ATA IRQ */ +#define IRQ_FATA 10 /* FATA IRQ */ +#define IRQ_POWER 11 /* Power Switch IRQ */ +#define IRQ_BUTTON 12 /* USL-5P Button IRQ */ +#define IRQ_FAULT 13 /* USL-5P Fault IRQ */ + +#define __IO_PREFIX landisk +#include + +#endif /* __ASM_SH_IODATA_LANDISK_H */ + diff --git a/arch/sh/include/mach-sh03/mach/io.h b/arch/sh/include/mach-sh03/mach/io.h new file mode 100644 index 00000000000..c39c785bba9 --- /dev/null +++ b/arch/sh/include/mach-sh03/mach/io.h @@ -0,0 +1,25 @@ +/* + * include/asm-sh/sh03/io.h + * + * Copyright 2004 Interface Co.,Ltd. Saito.K + * + * IO functions for an Interface CTP/PCI-SH03 + */ + +#ifndef _ASM_SH_IO_SH03_H +#define _ASM_SH_IO_SH03_H + +#include + +#define IRL0_IRQ 2 +#define IRL0_PRIORITY 13 +#define IRL1_IRQ 5 +#define IRL1_PRIORITY 10 +#define IRL2_IRQ 8 +#define IRL2_PRIORITY 7 +#define IRL3_IRQ 11 +#define IRL3_PRIORITY 4 + +void heartbeat_sh03(void); + +#endif /* _ASM_SH_IO_SH03_H */ diff --git a/arch/sh/include/mach-sh03/mach/sh03.h b/arch/sh/include/mach-sh03/mach/sh03.h new file mode 100644 index 00000000000..19c40b80428 --- /dev/null +++ b/arch/sh/include/mach-sh03/mach/sh03.h @@ -0,0 +1,18 @@ +#ifndef __ASM_SH_SH03_H +#define __ASM_SH_SH03_H + +/* + * linux/include/asm-sh/sh03/sh03.h + * + * Copyright (C) 2004 Interface Co., Ltd. Saito.K + * + * Interface CTP/PCI-SH03 support + */ + +#define PA_PCI_IO (0xbe240000) /* PCI I/O space */ +#define PA_PCI_MEM (0xbd000000) /* PCI MEM space */ + +#define PCIPAR (0xa4000cf8) /* PCI Config address */ +#define PCIPDR (0xa4000cfc) /* PCI Config data */ + +#endif /* __ASM_SH_SH03_H */ diff --git a/arch/sh/kernel/cpu/irq/intc-sh5.c b/arch/sh/kernel/cpu/irq/intc-sh5.c index 79baa47af97..726f0335da7 100644 --- a/arch/sh/kernel/cpu/irq/intc-sh5.c +++ b/arch/sh/kernel/cpu/irq/intc-sh5.c @@ -20,7 +20,7 @@ #include #include #include -#include +#include #include /* diff --git a/arch/sh/kernel/cpu/sh2/entry.S b/arch/sh/kernel/cpu/sh2/entry.S index ee894e5a45e..becc54c4569 100644 --- a/arch/sh/kernel/cpu/sh2/entry.S +++ b/arch/sh/kernel/cpu/sh2/entry.S @@ -14,7 +14,7 @@ #include #include #include -#include +#include #include #include #include diff --git a/arch/sh/kernel/cpu/sh2a/entry.S b/arch/sh/kernel/cpu/sh2a/entry.S index 47096dc3d20..ab3903eeda5 100644 --- a/arch/sh/kernel/cpu/sh2a/entry.S +++ b/arch/sh/kernel/cpu/sh2a/entry.S @@ -14,7 +14,7 @@ #include #include #include -#include +#include #include #include #include diff --git a/arch/sh/kernel/cpu/sh3/entry.S b/arch/sh/kernel/cpu/sh3/entry.S index 4004073f98c..3fe482dd05c 100644 --- a/arch/sh/kernel/cpu/sh3/entry.S +++ b/arch/sh/kernel/cpu/sh3/entry.S @@ -14,7 +14,7 @@ #include #include #include -#include +#include #include ! NOTE: diff --git a/arch/sh/kernel/cpu/sh4/fpu.c b/arch/sh/kernel/cpu/sh4/fpu.c index 8020796139f..2d452f67fb8 100644 --- a/arch/sh/kernel/cpu/sh4/fpu.c +++ b/arch/sh/kernel/cpu/sh4/fpu.c @@ -13,7 +13,7 @@ #include #include #include -#include +#include #include #include #include diff --git a/arch/sh/kernel/cpu/sh4/softfloat.c b/arch/sh/kernel/cpu/sh4/softfloat.c index 7b2d337ee41..828cb57cb95 100644 --- a/arch/sh/kernel/cpu/sh4/softfloat.c +++ b/arch/sh/kernel/cpu/sh4/softfloat.c @@ -36,7 +36,7 @@ * and Kamel Khelifi */ #include -#include +#include #define LIT64( a ) a##LL diff --git a/arch/sh/kernel/cpu/sh4/sq.c b/arch/sh/kernel/cpu/sh4/sq.c index 9561b02ade0..dcdf959a3d4 100644 --- a/arch/sh/kernel/cpu/sh4/sq.c +++ b/arch/sh/kernel/cpu/sh4/sq.c @@ -22,7 +22,7 @@ #include #include #include -#include +#include struct sq_mapping; diff --git a/arch/sh/kernel/cpu/sh5/entry.S b/arch/sh/kernel/cpu/sh5/entry.S index 05372ed6c56..ca08e7f26a3 100644 --- a/arch/sh/kernel/cpu/sh5/entry.S +++ b/arch/sh/kernel/cpu/sh5/entry.S @@ -11,7 +11,7 @@ */ #include #include -#include +#include #include #include #include diff --git a/arch/sh/kernel/head_64.S b/arch/sh/kernel/head_64.S index f42d4c0feb7..7ccfb995a39 100644 --- a/arch/sh/kernel/head_64.S +++ b/arch/sh/kernel/head_64.S @@ -11,8 +11,8 @@ #include #include #include -#include -#include +#include +#include #include /* diff --git a/arch/sh/kernel/irq.c b/arch/sh/kernel/irq.c index a2a99e487e3..64b7690c664 100644 --- a/arch/sh/kernel/irq.c +++ b/arch/sh/kernel/irq.c @@ -15,7 +15,7 @@ #include #include #include -#include +#include atomic_t irq_err_count; diff --git a/arch/sh/kernel/time_64.c b/arch/sh/kernel/time_64.c index 022a55f1c1d..791edabf7d8 100644 --- a/arch/sh/kernel/time_64.c +++ b/arch/sh/kernel/time_64.c @@ -33,8 +33,8 @@ #include #include #include -#include /* required by inline __asm__ stmt. */ -#include +#include /* required by inline __asm__ stmt. */ +#include #include #include #include diff --git a/arch/sh/lib64/panic.c b/arch/sh/lib64/panic.c index ff559e2a96f..da32ba7b5fc 100644 --- a/arch/sh/lib64/panic.c +++ b/arch/sh/lib64/panic.c @@ -8,7 +8,7 @@ #include #include -#include +#include /* THIS IS A PHYSICAL ADDRESS */ #define HDSP2534_ADDR (0x04002100) diff --git a/arch/sh/mm/fault_64.c b/arch/sh/mm/fault_64.c index 399d53710d2..bd63b961b2a 100644 --- a/arch/sh/mm/fault_64.c +++ b/arch/sh/mm/fault_64.c @@ -39,7 +39,7 @@ #include #include #include -#include +#include /* Callable from fault.c, so not static */ inline void __do_tlb_refill(unsigned long address, diff --git a/arch/sh/tools/Makefile b/arch/sh/tools/Makefile index 567516b58ac..b5d202be820 100644 --- a/arch/sh/tools/Makefile +++ b/arch/sh/tools/Makefile @@ -10,7 +10,7 @@ # Shamelessly cloned from ARM. # -include/asm-sh/machtypes.h: $(src)/gen-mach-types $(src)/mach-types +arch/sh/include/asm/machtypes.h: $(src)/gen-mach-types $(src)/mach-types @echo ' Generating $@' - $(Q)if [ ! -d include/asm-sh ]; then mkdir -p include/asm-sh; fi + $(Q)if [ ! -d arch/sh/include/asm ]; then mkdir -p arch/sh/include/asm; fi $(Q)$(AWK) -f $^ > $@ || { rm -f $@; /bin/false; } diff --git a/include/asm-sh/.gitignore b/include/asm-sh/.gitignore deleted file mode 100644 index 9218ef82b69..00000000000 --- a/include/asm-sh/.gitignore +++ /dev/null @@ -1,3 +0,0 @@ -cpu -mach -machtypes.h diff --git a/include/asm-sh/Kbuild b/include/asm-sh/Kbuild deleted file mode 100644 index 43910cdf78a..00000000000 --- a/include/asm-sh/Kbuild +++ /dev/null @@ -1,8 +0,0 @@ -include include/asm-generic/Kbuild.asm - -header-y += cpu-features.h - -unifdef-y += unistd_32.h -unifdef-y += unistd_64.h -unifdef-y += posix_types_32.h -unifdef-y += posix_types_64.h diff --git a/include/asm-sh/a.out.h b/include/asm-sh/a.out.h deleted file mode 100644 index 1f93130e179..00000000000 --- a/include/asm-sh/a.out.h +++ /dev/null @@ -1,20 +0,0 @@ -#ifndef __ASM_SH_A_OUT_H -#define __ASM_SH_A_OUT_H - -struct exec -{ - unsigned long a_info; /* Use macros N_MAGIC, etc for access */ - unsigned a_text; /* length of text, in bytes */ - unsigned a_data; /* length of data, in bytes */ - unsigned a_bss; /* length of uninitialized data area for file, in bytes */ - unsigned a_syms; /* length of symbol table data in file, in bytes */ - unsigned a_entry; /* start address */ - unsigned a_trsize; /* length of relocation info for text, in bytes */ - unsigned a_drsize; /* length of relocation info for data, in bytes */ -}; - -#define N_TRSIZE(a) ((a).a_trsize) -#define N_DRSIZE(a) ((a).a_drsize) -#define N_SYMSIZE(a) ((a).a_syms) - -#endif /* __ASM_SH_A_OUT_H */ diff --git a/include/asm-sh/adc.h b/include/asm-sh/adc.h deleted file mode 100644 index 5f85cf74d59..00000000000 --- a/include/asm-sh/adc.h +++ /dev/null @@ -1,13 +0,0 @@ -#ifndef __ASM_ADC_H -#define __ASM_ADC_H -#ifdef __KERNEL__ -/* - * Copyright (C) 2004 Andriy Skulysh - */ - -#include - -int adc_single(unsigned int channel); - -#endif /* __KERNEL__ */ -#endif /* __ASM_ADC_H */ diff --git a/include/asm-sh/addrspace.h b/include/asm-sh/addrspace.h deleted file mode 100644 index fa544fc38c2..00000000000 --- a/include/asm-sh/addrspace.h +++ /dev/null @@ -1,53 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 1999 by Kaz Kojima - * - * Defitions for the address spaces of the SH CPUs. - */ -#ifndef __ASM_SH_ADDRSPACE_H -#define __ASM_SH_ADDRSPACE_H - -#ifdef __KERNEL__ - -#include - -/* If this CPU supports segmentation, hook up the helpers */ -#ifdef P1SEG - -/* - [ P0/U0 (virtual) ] 0x00000000 <------ User space - [ P1 (fixed) cached ] 0x80000000 <------ Kernel space - [ P2 (fixed) non-cachable] 0xA0000000 <------ Physical access - [ P3 (virtual) cached] 0xC0000000 <------ vmalloced area - [ P4 control ] 0xE0000000 - */ - -/* Returns the privileged segment base of a given address */ -#define PXSEG(a) (((unsigned long)(a)) & 0xe0000000) - -/* Returns the physical address of a PnSEG (n=1,2) address */ -#define PHYSADDR(a) (((unsigned long)(a)) & 0x1fffffff) - -#ifdef CONFIG_29BIT -/* - * Map an address to a certain privileged segment - */ -#define P1SEGADDR(a) \ - ((__typeof__(a))(((unsigned long)(a) & 0x1fffffff) | P1SEG)) -#define P2SEGADDR(a) \ - ((__typeof__(a))(((unsigned long)(a) & 0x1fffffff) | P2SEG)) -#define P3SEGADDR(a) \ - ((__typeof__(a))(((unsigned long)(a) & 0x1fffffff) | P3SEG)) -#define P4SEGADDR(a) \ - ((__typeof__(a))(((unsigned long)(a) & 0x1fffffff) | P4SEG)) -#endif /* 29BIT */ -#endif /* P1SEG */ - -/* Check if an address can be reached in 29 bits */ -#define IS_29BIT(a) (((unsigned long)(a)) < 0x20000000) - -#endif /* __KERNEL__ */ -#endif /* __ASM_SH_ADDRSPACE_H */ diff --git a/include/asm-sh/atomic-grb.h b/include/asm-sh/atomic-grb.h deleted file mode 100644 index 4c5b7dbfced..00000000000 --- a/include/asm-sh/atomic-grb.h +++ /dev/null @@ -1,169 +0,0 @@ -#ifndef __ASM_SH_ATOMIC_GRB_H -#define __ASM_SH_ATOMIC_GRB_H - -static inline void atomic_add(int i, atomic_t *v) -{ - int tmp; - - __asm__ __volatile__ ( - " .align 2 \n\t" - " mova 1f, r0 \n\t" /* r0 = end point */ - " mov r15, r1 \n\t" /* r1 = saved sp */ - " mov #-6, r15 \n\t" /* LOGIN: r15 = size */ - " mov.l @%1, %0 \n\t" /* load old value */ - " add %2, %0 \n\t" /* add */ - " mov.l %0, @%1 \n\t" /* store new value */ - "1: mov r1, r15 \n\t" /* LOGOUT */ - : "=&r" (tmp), - "+r" (v) - : "r" (i) - : "memory" , "r0", "r1"); -} - -static inline void atomic_sub(int i, atomic_t *v) -{ - int tmp; - - __asm__ __volatile__ ( - " .align 2 \n\t" - " mova 1f, r0 \n\t" /* r0 = end point */ - " mov r15, r1 \n\t" /* r1 = saved sp */ - " mov #-6, r15 \n\t" /* LOGIN: r15 = size */ - " mov.l @%1, %0 \n\t" /* load old value */ - " sub %2, %0 \n\t" /* sub */ - " mov.l %0, @%1 \n\t" /* store new value */ - "1: mov r1, r15 \n\t" /* LOGOUT */ - : "=&r" (tmp), - "+r" (v) - : "r" (i) - : "memory" , "r0", "r1"); -} - -static inline int atomic_add_return(int i, atomic_t *v) -{ - int tmp; - - __asm__ __volatile__ ( - " .align 2 \n\t" - " mova 1f, r0 \n\t" /* r0 = end point */ - " mov r15, r1 \n\t" /* r1 = saved sp */ - " mov #-6, r15 \n\t" /* LOGIN: r15 = size */ - " mov.l @%1, %0 \n\t" /* load old value */ - " add %2, %0 \n\t" /* add */ - " mov.l %0, @%1 \n\t" /* store new value */ - "1: mov r1, r15 \n\t" /* LOGOUT */ - : "=&r" (tmp), - "+r" (v) - : "r" (i) - : "memory" , "r0", "r1"); - - return tmp; -} - -static inline int atomic_sub_return(int i, atomic_t *v) -{ - int tmp; - - __asm__ __volatile__ ( - " .align 2 \n\t" - " mova 1f, r0 \n\t" /* r0 = end point */ - " mov r15, r1 \n\t" /* r1 = saved sp */ - " mov #-6, r15 \n\t" /* LOGIN: r15 = size */ - " mov.l @%1, %0 \n\t" /* load old value */ - " sub %2, %0 \n\t" /* sub */ - " mov.l %0, @%1 \n\t" /* store new value */ - "1: mov r1, r15 \n\t" /* LOGOUT */ - : "=&r" (tmp), - "+r" (v) - : "r" (i) - : "memory", "r0", "r1"); - - return tmp; -} - -static inline void atomic_clear_mask(unsigned int mask, atomic_t *v) -{ - int tmp; - unsigned int _mask = ~mask; - - __asm__ __volatile__ ( - " .align 2 \n\t" - " mova 1f, r0 \n\t" /* r0 = end point */ - " mov r15, r1 \n\t" /* r1 = saved sp */ - " mov #-6, r15 \n\t" /* LOGIN: r15 = size */ - " mov.l @%1, %0 \n\t" /* load old value */ - " and %2, %0 \n\t" /* add */ - " mov.l %0, @%1 \n\t" /* store new value */ - "1: mov r1, r15 \n\t" /* LOGOUT */ - : "=&r" (tmp), - "+r" (v) - : "r" (_mask) - : "memory" , "r0", "r1"); -} - -static inline void atomic_set_mask(unsigned int mask, atomic_t *v) -{ - int tmp; - - __asm__ __volatile__ ( - " .align 2 \n\t" - " mova 1f, r0 \n\t" /* r0 = end point */ - " mov r15, r1 \n\t" /* r1 = saved sp */ - " mov #-6, r15 \n\t" /* LOGIN: r15 = size */ - " mov.l @%1, %0 \n\t" /* load old value */ - " or %2, %0 \n\t" /* or */ - " mov.l %0, @%1 \n\t" /* store new value */ - "1: mov r1, r15 \n\t" /* LOGOUT */ - : "=&r" (tmp), - "+r" (v) - : "r" (mask) - : "memory" , "r0", "r1"); -} - -static inline int atomic_cmpxchg(atomic_t *v, int old, int new) -{ - int ret; - - __asm__ __volatile__ ( - " .align 2 \n\t" - " mova 1f, r0 \n\t" - " nop \n\t" - " mov r15, r1 \n\t" - " mov #-8, r15 \n\t" - " mov.l @%1, %0 \n\t" - " cmp/eq %2, %0 \n\t" - " bf 1f \n\t" - " mov.l %3, @%1 \n\t" - "1: mov r1, r15 \n\t" - : "=&r" (ret) - : "r" (v), "r" (old), "r" (new) - : "memory" , "r0", "r1" , "t"); - - return ret; -} - -static inline int atomic_add_unless(atomic_t *v, int a, int u) -{ - int ret; - unsigned long tmp; - - __asm__ __volatile__ ( - " .align 2 \n\t" - " mova 1f, r0 \n\t" - " nop \n\t" - " mov r15, r1 \n\t" - " mov #-12, r15 \n\t" - " mov.l @%2, %1 \n\t" - " mov %1, %0 \n\t" - " cmp/eq %4, %0 \n\t" - " bt/s 1f \n\t" - " add %3, %1 \n\t" - " mov.l %1, @%2 \n\t" - "1: mov r1, r15 \n\t" - : "=&r" (ret), "=&r" (tmp) - : "r" (v), "r" (a), "r" (u) - : "memory" , "r0", "r1" , "t"); - - return ret != u; -} -#endif /* __ASM_SH_ATOMIC_GRB_H */ diff --git a/include/asm-sh/atomic-irq.h b/include/asm-sh/atomic-irq.h deleted file mode 100644 index 74f7943cff6..00000000000 --- a/include/asm-sh/atomic-irq.h +++ /dev/null @@ -1,71 +0,0 @@ -#ifndef __ASM_SH_ATOMIC_IRQ_H -#define __ASM_SH_ATOMIC_IRQ_H - -/* - * To get proper branch prediction for the main line, we must branch - * forward to code at the end of this object's .text section, then - * branch back to restart the operation. - */ -static inline void atomic_add(int i, atomic_t *v) -{ - unsigned long flags; - - local_irq_save(flags); - *(long *)v += i; - local_irq_restore(flags); -} - -static inline void atomic_sub(int i, atomic_t *v) -{ - unsigned long flags; - - local_irq_save(flags); - *(long *)v -= i; - local_irq_restore(flags); -} - -static inline int atomic_add_return(int i, atomic_t *v) -{ - unsigned long temp, flags; - - local_irq_save(flags); - temp = *(long *)v; - temp += i; - *(long *)v = temp; - local_irq_restore(flags); - - return temp; -} - -static inline int atomic_sub_return(int i, atomic_t *v) -{ - unsigned long temp, flags; - - local_irq_save(flags); - temp = *(long *)v; - temp -= i; - *(long *)v = temp; - local_irq_restore(flags); - - return temp; -} - -static inline void atomic_clear_mask(unsigned int mask, atomic_t *v) -{ - unsigned long flags; - - local_irq_save(flags); - *(long *)v &= ~mask; - local_irq_restore(flags); -} - -static inline void atomic_set_mask(unsigned int mask, atomic_t *v) -{ - unsigned long flags; - - local_irq_save(flags); - *(long *)v |= mask; - local_irq_restore(flags); -} - -#endif /* __ASM_SH_ATOMIC_IRQ_H */ diff --git a/include/asm-sh/atomic-llsc.h b/include/asm-sh/atomic-llsc.h deleted file mode 100644 index 4b00b78e3f4..00000000000 --- a/include/asm-sh/atomic-llsc.h +++ /dev/null @@ -1,107 +0,0 @@ -#ifndef __ASM_SH_ATOMIC_LLSC_H -#define __ASM_SH_ATOMIC_LLSC_H - -/* - * To get proper branch prediction for the main line, we must branch - * forward to code at the end of this object's .text section, then - * branch back to restart the operation. - */ -static inline void atomic_add(int i, atomic_t *v) -{ - unsigned long tmp; - - __asm__ __volatile__ ( -"1: movli.l @%2, %0 ! atomic_add \n" -" add %1, %0 \n" -" movco.l %0, @%2 \n" -" bf 1b \n" - : "=&z" (tmp) - : "r" (i), "r" (&v->counter) - : "t"); -} - -static inline void atomic_sub(int i, atomic_t *v) -{ - unsigned long tmp; - - __asm__ __volatile__ ( -"1: movli.l @%2, %0 ! atomic_sub \n" -" sub %1, %0 \n" -" movco.l %0, @%2 \n" -" bf 1b \n" - : "=&z" (tmp) - : "r" (i), "r" (&v->counter) - : "t"); -} - -/* - * SH-4A note: - * - * We basically get atomic_xxx_return() for free compared with - * atomic_xxx(). movli.l/movco.l require r0 due to the instruction - * encoding, so the retval is automatically set without having to - * do any special work. - */ -static inline int atomic_add_return(int i, atomic_t *v) -{ - unsigned long temp; - - __asm__ __volatile__ ( -"1: movli.l @%2, %0 ! atomic_add_return \n" -" add %1, %0 \n" -" movco.l %0, @%2 \n" -" bf 1b \n" -" synco \n" - : "=&z" (temp) - : "r" (i), "r" (&v->counter) - : "t"); - - return temp; -} - -static inline int atomic_sub_return(int i, atomic_t *v) -{ - unsigned long temp; - - __asm__ __volatile__ ( -"1: movli.l @%2, %0 ! atomic_sub_return \n" -" sub %1, %0 \n" -" movco.l %0, @%2 \n" -" bf 1b \n" -" synco \n" - : "=&z" (temp) - : "r" (i), "r" (&v->counter) - : "t"); - - return temp; -} - -static inline void atomic_clear_mask(unsigned int mask, atomic_t *v) -{ - unsigned long tmp; - - __asm__ __volatile__ ( -"1: movli.l @%2, %0 ! atomic_clear_mask \n" -" and %1, %0 \n" -" movco.l %0, @%2 \n" -" bf 1b \n" - : "=&z" (tmp) - : "r" (~mask), "r" (&v->counter) - : "t"); -} - -static inline void atomic_set_mask(unsigned int mask, atomic_t *v) -{ - unsigned long tmp; - - __asm__ __volatile__ ( -"1: movli.l @%2, %0 ! atomic_set_mask \n" -" or %1, %0 \n" -" movco.l %0, @%2 \n" -" bf 1b \n" - : "=&z" (tmp) - : "r" (mask), "r" (&v->counter) - : "t"); -} - -#endif /* __ASM_SH_ATOMIC_LLSC_H */ diff --git a/include/asm-sh/atomic.h b/include/asm-sh/atomic.h deleted file mode 100644 index c043ef00302..00000000000 --- a/include/asm-sh/atomic.h +++ /dev/null @@ -1,89 +0,0 @@ -#ifndef __ASM_SH_ATOMIC_H -#define __ASM_SH_ATOMIC_H - -/* - * Atomic operations that C can't guarantee us. Useful for - * resource counting etc.. - * - */ - -typedef struct { volatile int counter; } atomic_t; - -#define ATOMIC_INIT(i) ( (atomic_t) { (i) } ) - -#define atomic_read(v) ((v)->counter) -#define atomic_set(v,i) ((v)->counter = (i)) - -#include -#include - -#if defined(CONFIG_GUSA_RB) -#include -#elif defined(CONFIG_CPU_SH4A) -#include -#else -#include -#endif - -#define atomic_add_negative(a, v) (atomic_add_return((a), (v)) < 0) - -#define atomic_dec_return(v) atomic_sub_return(1,(v)) -#define atomic_inc_return(v) atomic_add_return(1,(v)) - -/* - * atomic_inc_and_test - increment and test - * @v: pointer of type atomic_t - * - * Atomically increments @v by 1 - * and returns true if the result is zero, or false for all - * other cases. - */ -#define atomic_inc_and_test(v) (atomic_inc_return(v) == 0) - -#define atomic_sub_and_test(i,v) (atomic_sub_return((i), (v)) == 0) -#define atomic_dec_and_test(v) (atomic_sub_return(1, (v)) == 0) - -#define atomic_inc(v) atomic_add(1,(v)) -#define atomic_dec(v) atomic_sub(1,(v)) - -#ifndef CONFIG_GUSA_RB -static inline int atomic_cmpxchg(atomic_t *v, int old, int new) -{ - int ret; - unsigned long flags; - - local_irq_save(flags); - ret = v->counter; - if (likely(ret == old)) - v->counter = new; - local_irq_restore(flags); - - return ret; -} - -static inline int atomic_add_unless(atomic_t *v, int a, int u) -{ - int ret; - unsigned long flags; - - local_irq_save(flags); - ret = v->counter; - if (ret != u) - v->counter += a; - local_irq_restore(flags); - - return ret != u; -} -#endif - -#define atomic_xchg(v, new) (xchg(&((v)->counter), new)) -#define atomic_inc_not_zero(v) atomic_add_unless((v), 1, 0) - -/* Atomic operations are already serializing on SH */ -#define smp_mb__before_atomic_dec() barrier() -#define smp_mb__after_atomic_dec() barrier() -#define smp_mb__before_atomic_inc() barrier() -#define smp_mb__after_atomic_inc() barrier() - -#include -#endif /* __ASM_SH_ATOMIC_H */ diff --git a/include/asm-sh/auxvec.h b/include/asm-sh/auxvec.h deleted file mode 100644 index a6b9d4f4859..00000000000 --- a/include/asm-sh/auxvec.h +++ /dev/null @@ -1,36 +0,0 @@ -#ifndef __ASM_SH_AUXVEC_H -#define __ASM_SH_AUXVEC_H - -/* - * Architecture-neutral AT_ values in 0-17, leave some room - * for more of them. - */ - -/* - * This entry gives some information about the FPU initialization - * performed by the kernel. - */ -#define AT_FPUCW 18 /* Used FPU control word. */ - -#ifdef CONFIG_VSYSCALL -/* - * Only define this in the vsyscall case, the entry point to - * the vsyscall page gets placed here. The kernel will attempt - * to build a gate VMA we don't care about otherwise.. - */ -#define AT_SYSINFO_EHDR 33 -#endif - -/* - * More complete cache descriptions than AT_[DIU]CACHEBSIZE. If the - * value is -1, then the cache doesn't exist. Otherwise: - * - * bit 0-3: Cache set-associativity; 0 means fully associative. - * bit 4-7: Log2 of cacheline size. - * bit 8-31: Size of the entire cache >> 8. - */ -#define AT_L1I_CACHESHAPE 34 -#define AT_L1D_CACHESHAPE 35 -#define AT_L2_CACHESHAPE 36 - -#endif /* __ASM_SH_AUXVEC_H */ diff --git a/include/asm-sh/bitops-grb.h b/include/asm-sh/bitops-grb.h deleted file mode 100644 index a5907b94395..00000000000 --- a/include/asm-sh/bitops-grb.h +++ /dev/null @@ -1,169 +0,0 @@ -#ifndef __ASM_SH_BITOPS_GRB_H -#define __ASM_SH_BITOPS_GRB_H - -static inline void set_bit(int nr, volatile void * addr) -{ - int mask; - volatile unsigned int *a = addr; - unsigned long tmp; - - a += nr >> 5; - mask = 1 << (nr & 0x1f); - - __asm__ __volatile__ ( - " .align 2 \n\t" - " mova 1f, r0 \n\t" /* r0 = end point */ - " mov r15, r1 \n\t" /* r1 = saved sp */ - " mov #-6, r15 \n\t" /* LOGIN: r15 = size */ - " mov.l @%1, %0 \n\t" /* load old value */ - " or %2, %0 \n\t" /* or */ - " mov.l %0, @%1 \n\t" /* store new value */ - "1: mov r1, r15 \n\t" /* LOGOUT */ - : "=&r" (tmp), - "+r" (a) - : "r" (mask) - : "memory" , "r0", "r1"); -} - -static inline void clear_bit(int nr, volatile void * addr) -{ - int mask; - volatile unsigned int *a = addr; - unsigned long tmp; - - a += nr >> 5; - mask = ~(1 << (nr & 0x1f)); - __asm__ __volatile__ ( - " .align 2 \n\t" - " mova 1f, r0 \n\t" /* r0 = end point */ - " mov r15, r1 \n\t" /* r1 = saved sp */ - " mov #-6, r15 \n\t" /* LOGIN: r15 = size */ - " mov.l @%1, %0 \n\t" /* load old value */ - " and %2, %0 \n\t" /* and */ - " mov.l %0, @%1 \n\t" /* store new value */ - "1: mov r1, r15 \n\t" /* LOGOUT */ - : "=&r" (tmp), - "+r" (a) - : "r" (mask) - : "memory" , "r0", "r1"); -} - -static inline void change_bit(int nr, volatile void * addr) -{ - int mask; - volatile unsigned int *a = addr; - unsigned long tmp; - - a += nr >> 5; - mask = 1 << (nr & 0x1f); - __asm__ __volatile__ ( - " .align 2 \n\t" - " mova 1f, r0 \n\t" /* r0 = end point */ - " mov r15, r1 \n\t" /* r1 = saved sp */ - " mov #-6, r15 \n\t" /* LOGIN: r15 = size */ - " mov.l @%1, %0 \n\t" /* load old value */ - " xor %2, %0 \n\t" /* xor */ - " mov.l %0, @%1 \n\t" /* store new value */ - "1: mov r1, r15 \n\t" /* LOGOUT */ - : "=&r" (tmp), - "+r" (a) - : "r" (mask) - : "memory" , "r0", "r1"); -} - -static inline int test_and_set_bit(int nr, volatile void * addr) -{ - int mask, retval; - volatile unsigned int *a = addr; - unsigned long tmp; - - a += nr >> 5; - mask = 1 << (nr & 0x1f); - - __asm__ __volatile__ ( - " .align 2 \n\t" - " mova 1f, r0 \n\t" /* r0 = end point */ - " mov r15, r1 \n\t" /* r1 = saved sp */ - " mov #-14, r15 \n\t" /* LOGIN: r15 = size */ - " mov.l @%2, %0 \n\t" /* load old value */ - " mov %0, %1 \n\t" - " tst %1, %3 \n\t" /* T = ((*a & mask) == 0) */ - " mov #-1, %1 \n\t" /* retvat = -1 */ - " negc %1, %1 \n\t" /* retval = (mask & *a) != 0 */ - " or %3, %0 \n\t" - " mov.l %0, @%2 \n\t" /* store new value */ - "1: mov r1, r15 \n\t" /* LOGOUT */ - : "=&r" (tmp), - "=&r" (retval), - "+r" (a) - : "r" (mask) - : "memory" , "r0", "r1" ,"t"); - - return retval; -} - -static inline int test_and_clear_bit(int nr, volatile void * addr) -{ - int mask, retval,not_mask; - volatile unsigned int *a = addr; - unsigned long tmp; - - a += nr >> 5; - mask = 1 << (nr & 0x1f); - - not_mask = ~mask; - - __asm__ __volatile__ ( - " .align 2 \n\t" - " mova 1f, r0 \n\t" /* r0 = end point */ - " mov r15, r1 \n\t" /* r1 = saved sp */ - " mov #-14, r15 \n\t" /* LOGIN */ - " mov.l @%2, %0 \n\t" /* load old value */ - " mov %0, %1 \n\t" /* %1 = *a */ - " tst %1, %3 \n\t" /* T = ((*a & mask) == 0) */ - " mov #-1, %1 \n\t" /* retvat = -1 */ - " negc %1, %1 \n\t" /* retval = (mask & *a) != 0 */ - " and %4, %0 \n\t" - " mov.l %0, @%2 \n\t" /* store new value */ - "1: mov r1, r15 \n\t" /* LOGOUT */ - : "=&r" (tmp), - "=&r" (retval), - "+r" (a) - : "r" (mask), - "r" (not_mask) - : "memory" , "r0", "r1", "t"); - - return retval; -} - -static inline int test_and_change_bit(int nr, volatile void * addr) -{ - int mask, retval; - volatile unsigned int *a = addr; - unsigned long tmp; - - a += nr >> 5; - mask = 1 << (nr & 0x1f); - - __asm__ __volatile__ ( - " .align 2 \n\t" - " mova 1f, r0 \n\t" /* r0 = end point */ - " mov r15, r1 \n\t" /* r1 = saved sp */ - " mov #-14, r15 \n\t" /* LOGIN */ - " mov.l @%2, %0 \n\t" /* load old value */ - " mov %0, %1 \n\t" /* %1 = *a */ - " tst %1, %3 \n\t" /* T = ((*a & mask) == 0) */ - " mov #-1, %1 \n\t" /* retvat = -1 */ - " negc %1, %1 \n\t" /* retval = (mask & *a) != 0 */ - " xor %3, %0 \n\t" - " mov.l %0, @%2 \n\t" /* store new value */ - "1: mov r1, r15 \n\t" /* LOGOUT */ - : "=&r" (tmp), - "=&r" (retval), - "+r" (a) - : "r" (mask) - : "memory" , "r0", "r1", "t"); - - return retval; -} -#endif /* __ASM_SH_BITOPS_GRB_H */ diff --git a/include/asm-sh/bitops-irq.h b/include/asm-sh/bitops-irq.h deleted file mode 100644 index 653a1275058..00000000000 --- a/include/asm-sh/bitops-irq.h +++ /dev/null @@ -1,91 +0,0 @@ -#ifndef __ASM_SH_BITOPS_IRQ_H -#define __ASM_SH_BITOPS_IRQ_H - -static inline void set_bit(int nr, volatile void *addr) -{ - int mask; - volatile unsigned int *a = addr; - unsigned long flags; - - a += nr >> 5; - mask = 1 << (nr & 0x1f); - local_irq_save(flags); - *a |= mask; - local_irq_restore(flags); -} - -static inline void clear_bit(int nr, volatile void *addr) -{ - int mask; - volatile unsigned int *a = addr; - unsigned long flags; - - a += nr >> 5; - mask = 1 << (nr & 0x1f); - local_irq_save(flags); - *a &= ~mask; - local_irq_restore(flags); -} - -static inline void change_bit(int nr, volatile void *addr) -{ - int mask; - volatile unsigned int *a = addr; - unsigned long flags; - - a += nr >> 5; - mask = 1 << (nr & 0x1f); - local_irq_save(flags); - *a ^= mask; - local_irq_restore(flags); -} - -static inline int test_and_set_bit(int nr, volatile void *addr) -{ - int mask, retval; - volatile unsigned int *a = addr; - unsigned long flags; - - a += nr >> 5; - mask = 1 << (nr & 0x1f); - local_irq_save(flags); - retval = (mask & *a) != 0; - *a |= mask; - local_irq_restore(flags); - - return retval; -} - -static inline int test_and_clear_bit(int nr, volatile void *addr) -{ - int mask, retval; - volatile unsigned int *a = addr; - unsigned long flags; - - a += nr >> 5; - mask = 1 << (nr & 0x1f); - local_irq_save(flags); - retval = (mask & *a) != 0; - *a &= ~mask; - local_irq_restore(flags); - - return retval; -} - -static inline int test_and_change_bit(int nr, volatile void *addr) -{ - int mask, retval; - volatile unsigned int *a = addr; - unsigned long flags; - - a += nr >> 5; - mask = 1 << (nr & 0x1f); - local_irq_save(flags); - retval = (mask & *a) != 0; - *a ^= mask; - local_irq_restore(flags); - - return retval; -} - -#endif /* __ASM_SH_BITOPS_IRQ_H */ diff --git a/include/asm-sh/bitops.h b/include/asm-sh/bitops.h deleted file mode 100644 index d7d382f63ee..00000000000 --- a/include/asm-sh/bitops.h +++ /dev/null @@ -1,103 +0,0 @@ -#ifndef __ASM_SH_BITOPS_H -#define __ASM_SH_BITOPS_H - -#ifdef __KERNEL__ - -#ifndef _LINUX_BITOPS_H -#error only can be included directly -#endif - -#include -/* For __swab32 */ -#include - -#ifdef CONFIG_GUSA_RB -#include -#else -#include -#endif - - -/* - * clear_bit() doesn't provide any barrier for the compiler. - */ -#define smp_mb__before_clear_bit() barrier() -#define smp_mb__after_clear_bit() barrier() - -#include - -#ifdef CONFIG_SUPERH32 -static inline unsigned long ffz(unsigned long word) -{ - unsigned long result; - - __asm__("1:\n\t" - "shlr %1\n\t" - "bt/s 1b\n\t" - " add #1, %0" - : "=r" (result), "=r" (word) - : "0" (~0L), "1" (word) - : "t"); - return result; -} - -/** - * __ffs - find first bit in word. - * @word: The word to search - * - * Undefined if no bit exists, so code should check against 0 first. - */ -static inline unsigned long __ffs(unsigned long word) -{ - unsigned long result; - - __asm__("1:\n\t" - "shlr %1\n\t" - "bf/s 1b\n\t" - " add #1, %0" - : "=r" (result), "=r" (word) - : "0" (~0L), "1" (word) - : "t"); - return result; -} -#else -static inline unsigned long ffz(unsigned long word) -{ - unsigned long result, __d2, __d3; - - __asm__("gettr tr0, %2\n\t" - "pta $+32, tr0\n\t" - "andi %1, 1, %3\n\t" - "beq %3, r63, tr0\n\t" - "pta $+4, tr0\n" - "0:\n\t" - "shlri.l %1, 1, %1\n\t" - "addi %0, 1, %0\n\t" - "andi %1, 1, %3\n\t" - "beqi %3, 1, tr0\n" - "1:\n\t" - "ptabs %2, tr0\n\t" - : "=r" (result), "=r" (word), "=r" (__d2), "=r" (__d3) - : "0" (0L), "1" (word)); - - return result; -} - -#include -#endif - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#endif /* __KERNEL__ */ - -#endif /* __ASM_SH_BITOPS_H */ diff --git a/include/asm-sh/bug.h b/include/asm-sh/bug.h deleted file mode 100644 index c0171804016..00000000000 --- a/include/asm-sh/bug.h +++ /dev/null @@ -1,79 +0,0 @@ -#ifndef __ASM_SH_BUG_H -#define __ASM_SH_BUG_H - -#define TRAPA_BUG_OPCODE 0xc33e /* trapa #0x3e */ - -#ifdef CONFIG_GENERIC_BUG -#define HAVE_ARCH_BUG -#define HAVE_ARCH_WARN_ON - -/** - * _EMIT_BUG_ENTRY - * %1 - __FILE__ - * %2 - __LINE__ - * %3 - trap type - * %4 - sizeof(struct bug_entry) - * - * The trapa opcode itself sits in %0. - * The %O notation is used to avoid # generation. - * - * The offending file and line are encoded in the __bug_table section. - */ -#ifdef CONFIG_DEBUG_BUGVERBOSE -#define _EMIT_BUG_ENTRY \ - "\t.pushsection __bug_table,\"a\"\n" \ - "2:\t.long 1b, %O1\n" \ - "\t.short %O2, %O3\n" \ - "\t.org 2b+%O4\n" \ - "\t.popsection\n" -#else -#define _EMIT_BUG_ENTRY \ - "\t.pushsection __bug_table,\"a\"\n" \ - "2:\t.long 1b\n" \ - "\t.short %O3\n" \ - "\t.org 2b+%O4\n" \ - "\t.popsection\n" -#endif - -#define BUG() \ -do { \ - __asm__ __volatile__ ( \ - "1:\t.short %O0\n" \ - _EMIT_BUG_ENTRY \ - : \ - : "n" (TRAPA_BUG_OPCODE), \ - "i" (__FILE__), \ - "i" (__LINE__), "i" (0), \ - "i" (sizeof(struct bug_entry))); \ -} while (0) - -#define __WARN() \ -do { \ - __asm__ __volatile__ ( \ - "1:\t.short %O0\n" \ - _EMIT_BUG_ENTRY \ - : \ - : "n" (TRAPA_BUG_OPCODE), \ - "i" (__FILE__), \ - "i" (__LINE__), \ - "i" (BUGFLAG_WARNING), \ - "i" (sizeof(struct bug_entry))); \ -} while (0) - -#define WARN_ON(x) ({ \ - int __ret_warn_on = !!(x); \ - if (__builtin_constant_p(__ret_warn_on)) { \ - if (__ret_warn_on) \ - __WARN(); \ - } else { \ - if (unlikely(__ret_warn_on)) \ - __WARN(); \ - } \ - unlikely(__ret_warn_on); \ -}) - -#endif /* CONFIG_GENERIC_BUG */ - -#include - -#endif /* __ASM_SH_BUG_H */ diff --git a/include/asm-sh/bugs.h b/include/asm-sh/bugs.h deleted file mode 100644 index 121b2ecddfc..00000000000 --- a/include/asm-sh/bugs.h +++ /dev/null @@ -1,73 +0,0 @@ -#ifndef __ASM_SH_BUGS_H -#define __ASM_SH_BUGS_H - -/* - * This is included by init/main.c to check for architecture-dependent bugs. - * - * Needs: - * void check_bugs(void); - */ - -/* - * I don't know of any Super-H bugs yet. - */ - -#include - -static void __init check_bugs(void) -{ - extern unsigned long loops_per_jiffy; - char *p = &init_utsname()->machine[2]; /* "sh" */ - - current_cpu_data.loops_per_jiffy = loops_per_jiffy; - - switch (current_cpu_data.type) { - case CPU_SH7619: - *p++ = '2'; - break; - case CPU_SH7203 ... CPU_MXG: - *p++ = '2'; - *p++ = 'a'; - break; - case CPU_SH7705 ... CPU_SH7729: - *p++ = '3'; - break; - case CPU_SH7750 ... CPU_SH4_501: - *p++ = '4'; - break; - case CPU_SH7763 ... CPU_SHX3: - *p++ = '4'; - *p++ = 'a'; - break; - case CPU_SH7343 ... CPU_SH7366: - *p++ = '4'; - *p++ = 'a'; - *p++ = 'l'; - *p++ = '-'; - *p++ = 'd'; - *p++ = 's'; - *p++ = 'p'; - break; - case CPU_SH5_101 ... CPU_SH5_103: - *p++ = '6'; - *p++ = '4'; - break; - case CPU_SH_NONE: - /* - * Specifically use CPU_SH_NONE rather than default:, - * so we're able to have the compiler whine about - * unhandled enumerations. - */ - break; - } - - printk("CPU: %s\n", get_cpu_subtype(¤t_cpu_data)); - -#ifndef __LITTLE_ENDIAN__ - /* 'eb' means 'Endian Big' */ - *p++ = 'e'; - *p++ = 'b'; -#endif - *p = '\0'; -} -#endif /* __ASM_SH_BUGS_H */ diff --git a/include/asm-sh/byteorder.h b/include/asm-sh/byteorder.h deleted file mode 100644 index 4c13e611756..00000000000 --- a/include/asm-sh/byteorder.h +++ /dev/null @@ -1,70 +0,0 @@ -#ifndef __ASM_SH_BYTEORDER_H -#define __ASM_SH_BYTEORDER_H - -/* - * Copyright (C) 1999 Niibe Yutaka - * Copyright (C) 2000, 2001 Paolo Alberelli - */ -#include -#include - -static inline __attribute_const__ __u32 ___arch__swab32(__u32 x) -{ - __asm__( -#ifdef __SH5__ - "byterev %0, %0\n\t" - "shari %0, 32, %0" -#else - "swap.b %0, %0\n\t" - "swap.w %0, %0\n\t" - "swap.b %0, %0" -#endif - : "=r" (x) - : "0" (x)); - - return x; -} - -static inline __attribute_const__ __u16 ___arch__swab16(__u16 x) -{ - __asm__( -#ifdef __SH5__ - "byterev %0, %0\n\t" - "shari %0, 32, %0" -#else - "swap.b %0, %0" -#endif - : "=r" (x) - : "0" (x)); - - return x; -} - -static inline __u64 ___arch__swab64(__u64 val) -{ - union { - struct { __u32 a,b; } s; - __u64 u; - } v, w; - v.u = val; - w.s.b = ___arch__swab32(v.s.a); - w.s.a = ___arch__swab32(v.s.b); - return w.u; -} - -#define __arch__swab64(x) ___arch__swab64(x) -#define __arch__swab32(x) ___arch__swab32(x) -#define __arch__swab16(x) ___arch__swab16(x) - -#if !defined(__STRICT_ANSI__) || defined(__KERNEL__) -# define __BYTEORDER_HAS_U64__ -# define __SWAB_64_THRU_32__ -#endif - -#ifdef __LITTLE_ENDIAN__ -#include -#else -#include -#endif - -#endif /* __ASM_SH_BYTEORDER_H */ diff --git a/include/asm-sh/cache.h b/include/asm-sh/cache.h deleted file mode 100644 index 083419f47c6..00000000000 --- a/include/asm-sh/cache.h +++ /dev/null @@ -1,51 +0,0 @@ -/* $Id: cache.h,v 1.6 2004/03/11 18:08:05 lethal Exp $ - * - * include/asm-sh/cache.h - * - * Copyright 1999 (C) Niibe Yutaka - * Copyright 2002, 2003 (C) Paul Mundt - */ -#ifndef __ASM_SH_CACHE_H -#define __ASM_SH_CACHE_H -#ifdef __KERNEL__ - -#include -#include - -#define L1_CACHE_BYTES (1 << L1_CACHE_SHIFT) - -#define __read_mostly __attribute__((__section__(".data.read_mostly"))) - -#ifndef __ASSEMBLY__ -struct cache_info { - unsigned int ways; /* Number of cache ways */ - unsigned int sets; /* Number of cache sets */ - unsigned int linesz; /* Cache line size (bytes) */ - - unsigned int way_size; /* sets * line size */ - - /* - * way_incr is the address offset for accessing the next way - * in memory mapped cache array ops. - */ - unsigned int way_incr; - unsigned int entry_shift; - unsigned int entry_mask; - - /* - * Compute a mask which selects the address bits which overlap between - * 1. those used to select the cache set during indexing - * 2. those in the physical page number. - */ - unsigned int alias_mask; - - unsigned int n_aliases; /* Number of aliases */ - - unsigned long flags; -}; - -int __init detect_cpu_and_cache_system(void); - -#endif /* __ASSEMBLY__ */ -#endif /* __KERNEL__ */ -#endif /* __ASM_SH_CACHE_H */ diff --git a/include/asm-sh/cacheflush.h b/include/asm-sh/cacheflush.h deleted file mode 100644 index e034c360411..00000000000 --- a/include/asm-sh/cacheflush.h +++ /dev/null @@ -1,81 +0,0 @@ -#ifndef __ASM_SH_CACHEFLUSH_H -#define __ASM_SH_CACHEFLUSH_H - -#ifdef __KERNEL__ - -#ifdef CONFIG_CACHE_OFF -/* - * Nothing to do when the cache is disabled, initial flush and explicit - * disabling is handled at CPU init time. - * - * See arch/sh/kernel/cpu/init.c:cache_init(). - */ -#define p3_cache_init() do { } while (0) -#define flush_cache_all() do { } while (0) -#define flush_cache_mm(mm) do { } while (0) -#define flush_cache_dup_mm(mm) do { } while (0) -#define flush_cache_range(vma, start, end) do { } while (0) -#define flush_cache_page(vma, vmaddr, pfn) do { } while (0) -#define flush_dcache_page(page) do { } while (0) -#define flush_icache_range(start, end) do { } while (0) -#define flush_icache_page(vma,pg) do { } while (0) -#define flush_dcache_mmap_lock(mapping) do { } while (0) -#define flush_dcache_mmap_unlock(mapping) do { } while (0) -#define flush_cache_sigtramp(vaddr) do { } while (0) -#define flush_icache_user_range(vma,pg,adr,len) do { } while (0) -#define __flush_wback_region(start, size) do { (void)(start); } while (0) -#define __flush_purge_region(start, size) do { (void)(start); } while (0) -#define __flush_invalidate_region(start, size) do { (void)(start); } while (0) -#else -#include - -/* - * Consistent DMA requires that the __flush_xxx() primitives must be set - * for any of the enabled non-coherent caches (most of the UP CPUs), - * regardless of PIPT or VIPT cache configurations. - */ - -/* Flush (write-back only) a region (smaller than a page) */ -extern void __flush_wback_region(void *start, int size); -/* Flush (write-back & invalidate) a region (smaller than a page) */ -extern void __flush_purge_region(void *start, int size); -/* Flush (invalidate only) a region (smaller than a page) */ -extern void __flush_invalidate_region(void *start, int size); -#endif - -#define ARCH_HAS_FLUSH_KERNEL_DCACHE_PAGE -static inline void flush_kernel_dcache_page(struct page *page) -{ - flush_dcache_page(page); -} - -#if defined(CONFIG_CPU_SH4) && !defined(CONFIG_CACHE_OFF) -extern void copy_to_user_page(struct vm_area_struct *vma, - struct page *page, unsigned long vaddr, void *dst, const void *src, - unsigned long len); - -extern void copy_from_user_page(struct vm_area_struct *vma, - struct page *page, unsigned long vaddr, void *dst, const void *src, - unsigned long len); -#else -#define copy_to_user_page(vma, page, vaddr, dst, src, len) \ - do { \ - flush_cache_page(vma, vaddr, page_to_pfn(page));\ - memcpy(dst, src, len); \ - flush_icache_user_range(vma, page, vaddr, len); \ - } while (0) - -#define copy_from_user_page(vma, page, vaddr, dst, src, len) \ - do { \ - flush_cache_page(vma, vaddr, page_to_pfn(page));\ - memcpy(dst, src, len); \ - } while (0) -#endif - -#define flush_cache_vmap(start, end) flush_cache_all() -#define flush_cache_vunmap(start, end) flush_cache_all() - -#define HAVE_ARCH_UNMAPPED_AREA - -#endif /* __KERNEL__ */ -#endif /* __ASM_SH_CACHEFLUSH_H */ diff --git a/include/asm-sh/checksum.h b/include/asm-sh/checksum.h deleted file mode 100644 index 67496ab0ef0..00000000000 --- a/include/asm-sh/checksum.h +++ /dev/null @@ -1,5 +0,0 @@ -#ifdef CONFIG_SUPERH32 -# include "checksum_32.h" -#else -# include "checksum_64.h" -#endif diff --git a/include/asm-sh/checksum_32.h b/include/asm-sh/checksum_32.h deleted file mode 100644 index 14b7ac2f0a0..00000000000 --- a/include/asm-sh/checksum_32.h +++ /dev/null @@ -1,215 +0,0 @@ -#ifndef __ASM_SH_CHECKSUM_H -#define __ASM_SH_CHECKSUM_H - -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 1999 by Kaz Kojima & Niibe Yutaka - */ - -#include - -/* - * computes the checksum of a memory block at buff, length len, - * and adds in "sum" (32-bit) - * - * returns a 32-bit number suitable for feeding into itself - * or csum_tcpudp_magic - * - * this function must be called with even lengths, except - * for the last fragment, which may be odd - * - * it's best to have buff aligned on a 32-bit boundary - */ -asmlinkage __wsum csum_partial(const void *buff, int len, __wsum sum); - -/* - * the same as csum_partial, but copies from src while it - * checksums, and handles user-space pointer exceptions correctly, when needed. - * - * here even more important to align src and dst on a 32-bit (or even - * better 64-bit) boundary - */ - -asmlinkage __wsum csum_partial_copy_generic(const void *src, void *dst, - int len, __wsum sum, - int *src_err_ptr, int *dst_err_ptr); - -/* - * Note: when you get a NULL pointer exception here this means someone - * passed in an incorrect kernel address to one of these functions. - * - * If you use these functions directly please don't forget the - * access_ok(). - */ -static inline -__wsum csum_partial_copy_nocheck(const void *src, void *dst, - int len, __wsum sum) -{ - return csum_partial_copy_generic(src, dst, len, sum, NULL, NULL); -} - -static inline -__wsum csum_partial_copy_from_user(const void __user *src, void *dst, - int len, __wsum sum, int *err_ptr) -{ - return csum_partial_copy_generic((__force const void *)src, dst, - len, sum, err_ptr, NULL); -} - -/* - * Fold a partial checksum - */ - -static inline __sum16 csum_fold(__wsum sum) -{ - unsigned int __dummy; - __asm__("swap.w %0, %1\n\t" - "extu.w %0, %0\n\t" - "extu.w %1, %1\n\t" - "add %1, %0\n\t" - "swap.w %0, %1\n\t" - "add %1, %0\n\t" - "not %0, %0\n\t" - : "=r" (sum), "=&r" (__dummy) - : "0" (sum) - : "t"); - return (__force __sum16)sum; -} - -/* - * This is a version of ip_compute_csum() optimized for IP headers, - * which always checksum on 4 octet boundaries. - * - * i386 version by Jorge Cwik , adapted - * for linux by * Arnt Gulbrandsen. - */ -static inline __sum16 ip_fast_csum(const void *iph, unsigned int ihl) -{ - unsigned int sum, __dummy0, __dummy1; - - __asm__ __volatile__( - "mov.l @%1+, %0\n\t" - "mov.l @%1+, %3\n\t" - "add #-2, %2\n\t" - "clrt\n\t" - "1:\t" - "addc %3, %0\n\t" - "movt %4\n\t" - "mov.l @%1+, %3\n\t" - "dt %2\n\t" - "bf/s 1b\n\t" - " cmp/eq #1, %4\n\t" - "addc %3, %0\n\t" - "addc %2, %0" /* Here %2 is 0, add carry-bit */ - /* Since the input registers which are loaded with iph and ihl - are modified, we must also specify them as outputs, or gcc - will assume they contain their original values. */ - : "=r" (sum), "=r" (iph), "=r" (ihl), "=&r" (__dummy0), "=&z" (__dummy1) - : "1" (iph), "2" (ihl) - : "t", "memory"); - - return csum_fold(sum); -} - -static inline __wsum csum_tcpudp_nofold(__be32 saddr, __be32 daddr, - unsigned short len, - unsigned short proto, - __wsum sum) -{ -#ifdef __LITTLE_ENDIAN__ - unsigned long len_proto = (proto + len) << 8; -#else - unsigned long len_proto = proto + len; -#endif - __asm__("clrt\n\t" - "addc %0, %1\n\t" - "addc %2, %1\n\t" - "addc %3, %1\n\t" - "movt %0\n\t" - "add %1, %0" - : "=r" (sum), "=r" (len_proto) - : "r" (daddr), "r" (saddr), "1" (len_proto), "0" (sum) - : "t"); - - return sum; -} - -/* - * computes the checksum of the TCP/UDP pseudo-header - * returns a 16-bit checksum, already complemented - */ -static inline __sum16 csum_tcpudp_magic(__be32 saddr, __be32 daddr, - unsigned short len, - unsigned short proto, - __wsum sum) -{ - return csum_fold(csum_tcpudp_nofold(saddr, daddr, len, proto, sum)); -} - -/* - * this routine is used for miscellaneous IP-like checksums, mainly - * in icmp.c - */ -static inline __sum16 ip_compute_csum(const void *buff, int len) -{ - return csum_fold(csum_partial(buff, len, 0)); -} - -#define _HAVE_ARCH_IPV6_CSUM -static inline __sum16 csum_ipv6_magic(const struct in6_addr *saddr, - const struct in6_addr *daddr, - __u32 len, unsigned short proto, - __wsum sum) -{ - unsigned int __dummy; - __asm__("clrt\n\t" - "mov.l @(0,%2), %1\n\t" - "addc %1, %0\n\t" - "mov.l @(4,%2), %1\n\t" - "addc %1, %0\n\t" - "mov.l @(8,%2), %1\n\t" - "addc %1, %0\n\t" - "mov.l @(12,%2), %1\n\t" - "addc %1, %0\n\t" - "mov.l @(0,%3), %1\n\t" - "addc %1, %0\n\t" - "mov.l @(4,%3), %1\n\t" - "addc %1, %0\n\t" - "mov.l @(8,%3), %1\n\t" - "addc %1, %0\n\t" - "mov.l @(12,%3), %1\n\t" - "addc %1, %0\n\t" - "addc %4, %0\n\t" - "addc %5, %0\n\t" - "movt %1\n\t" - "add %1, %0\n" - : "=r" (sum), "=&r" (__dummy) - : "r" (saddr), "r" (daddr), - "r" (htonl(len)), "r" (htonl(proto)), "0" (sum) - : "t"); - - return csum_fold(sum); -} - -/* - * Copy and checksum to user - */ -#define HAVE_CSUM_COPY_USER -static inline __wsum csum_and_copy_to_user(const void *src, - void __user *dst, - int len, __wsum sum, - int *err_ptr) -{ - if (access_ok(VERIFY_WRITE, dst, len)) - return csum_partial_copy_generic((__force const void *)src, - dst, len, sum, NULL, err_ptr); - - if (len) - *err_ptr = -EFAULT; - - return (__force __wsum)-1; /* invalid checksum */ -} -#endif /* __ASM_SH_CHECKSUM_H */ diff --git a/include/asm-sh/checksum_64.h b/include/asm-sh/checksum_64.h deleted file mode 100644 index 9c62a031a8f..00000000000 --- a/include/asm-sh/checksum_64.h +++ /dev/null @@ -1,78 +0,0 @@ -#ifndef __ASM_SH_CHECKSUM_64_H -#define __ASM_SH_CHECKSUM_64_H - -/* - * include/asm-sh/checksum_64.h - * - * Copyright (C) 2000, 2001 Paolo Alberelli - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ - -/* - * computes the checksum of a memory block at buff, length len, - * and adds in "sum" (32-bit) - * - * returns a 32-bit number suitable for feeding into itself - * or csum_tcpudp_magic - * - * this function must be called with even lengths, except - * for the last fragment, which may be odd - * - * it's best to have buff aligned on a 32-bit boundary - */ -asmlinkage __wsum csum_partial(const void *buff, int len, __wsum sum); - -/* - * Note: when you get a NULL pointer exception here this means someone - * passed in an incorrect kernel address to one of these functions. - * - * If you use these functions directly please don't forget the - * access_ok(). - */ - - -__wsum csum_partial_copy_nocheck(const void *src, void *dst, int len, - __wsum sum); - -__wsum csum_partial_copy_from_user(const void __user *src, void *dst, - int len, __wsum sum, int *err_ptr); - -static inline __sum16 csum_fold(__wsum csum) -{ - u32 sum = (__force u32)csum; - sum = (sum & 0xffff) + (sum >> 16); - sum = (sum & 0xffff) + (sum >> 16); - return (__force __sum16)~sum; -} - -__sum16 ip_fast_csum(const void *iph, unsigned int ihl); - -__wsum csum_tcpudp_nofold(__be32 saddr, __be32 daddr, - unsigned short len, unsigned short proto, - __wsum sum); - -/* - * computes the checksum of the TCP/UDP pseudo-header - * returns a 16-bit checksum, already complemented - */ -static inline __sum16 csum_tcpudp_magic(__be32 saddr, __be32 daddr, - unsigned short len, - unsigned short proto, - __wsum sum) -{ - return csum_fold(csum_tcpudp_nofold(saddr,daddr,len,proto,sum)); -} - -/* - * this routine is used for miscellaneous IP-like checksums, mainly - * in icmp.c - */ -static inline __sum16 ip_compute_csum(const void *buff, int len) -{ - return csum_fold(csum_partial(buff, len, 0)); -} - -#endif /* __ASM_SH_CHECKSUM_64_H */ diff --git a/include/asm-sh/clock.h b/include/asm-sh/clock.h deleted file mode 100644 index 720dfab7b15..00000000000 --- a/include/asm-sh/clock.h +++ /dev/null @@ -1,97 +0,0 @@ -#ifndef __ASM_SH_CLOCK_H -#define __ASM_SH_CLOCK_H - -#include -#include -#include -#include -#include - -struct clk; - -struct clk_ops { - void (*init)(struct clk *clk); - void (*enable)(struct clk *clk); - void (*disable)(struct clk *clk); - void (*recalc)(struct clk *clk); - int (*set_rate)(struct clk *clk, unsigned long rate, int algo_id); - long (*round_rate)(struct clk *clk, unsigned long rate); -}; - -struct clk { - struct list_head node; - const char *name; - int id; - struct module *owner; - - struct clk *parent; - struct clk_ops *ops; - - struct kref kref; - - unsigned long rate; - unsigned long flags; - unsigned long arch_flags; -}; - -#define CLK_ALWAYS_ENABLED (1 << 0) -#define CLK_RATE_PROPAGATES (1 << 1) - -/* Should be defined by processor-specific code */ -void arch_init_clk_ops(struct clk_ops **, int type); - -/* arch/sh/kernel/cpu/clock.c */ -int clk_init(void); - -void clk_recalc_rate(struct clk *); - -int clk_register(struct clk *); -void clk_unregister(struct clk *); - -static inline int clk_always_enable(const char *id) -{ - struct clk *clk; - int ret; - - clk = clk_get(NULL, id); - if (IS_ERR(clk)) - return PTR_ERR(clk); - - ret = clk_enable(clk); - if (ret) - clk_put(clk); - - return ret; -} - -/* the exported API, in addition to clk_set_rate */ -/** - * clk_set_rate_ex - set the clock rate for a clock source, with additional parameter - * @clk: clock source - * @rate: desired clock rate in Hz - * @algo_id: algorithm id to be passed down to ops->set_rate - * - * Returns success (0) or negative errno. - */ -int clk_set_rate_ex(struct clk *clk, unsigned long rate, int algo_id); - -enum clk_sh_algo_id { - NO_CHANGE = 0, - - IUS_N1_N1, - IUS_322, - IUS_522, - IUS_N11, - - SB_N1, - - SB3_N1, - SB3_32, - SB3_43, - SB3_54, - - BP_N1, - - IP_N1, -}; -#endif /* __ASM_SH_CLOCK_H */ diff --git a/include/asm-sh/cmpxchg-grb.h b/include/asm-sh/cmpxchg-grb.h deleted file mode 100644 index e2681abe764..00000000000 --- a/include/asm-sh/cmpxchg-grb.h +++ /dev/null @@ -1,70 +0,0 @@ -#ifndef __ASM_SH_CMPXCHG_GRB_H -#define __ASM_SH_CMPXCHG_GRB_H - -static inline unsigned long xchg_u32(volatile u32 *m, unsigned long val) -{ - unsigned long retval; - - __asm__ __volatile__ ( - " .align 2 \n\t" - " mova 1f, r0 \n\t" /* r0 = end point */ - " nop \n\t" - " mov r15, r1 \n\t" /* r1 = saved sp */ - " mov #-4, r15 \n\t" /* LOGIN */ - " mov.l @%1, %0 \n\t" /* load old value */ - " mov.l %2, @%1 \n\t" /* store new value */ - "1: mov r1, r15 \n\t" /* LOGOUT */ - : "=&r" (retval), - "+r" (m) - : "r" (val) - : "memory", "r0", "r1"); - - return retval; -} - -static inline unsigned long xchg_u8(volatile u8 *m, unsigned long val) -{ - unsigned long retval; - - __asm__ __volatile__ ( - " .align 2 \n\t" - " mova 1f, r0 \n\t" /* r0 = end point */ - " mov r15, r1 \n\t" /* r1 = saved sp */ - " mov #-6, r15 \n\t" /* LOGIN */ - " mov.b @%1, %0 \n\t" /* load old value */ - " extu.b %0, %0 \n\t" /* extend as unsigned */ - " mov.b %2, @%1 \n\t" /* store new value */ - "1: mov r1, r15 \n\t" /* LOGOUT */ - : "=&r" (retval), - "+r" (m) - : "r" (val) - : "memory" , "r0", "r1"); - - return retval; -} - -static inline unsigned long __cmpxchg_u32(volatile int *m, unsigned long old, - unsigned long new) -{ - unsigned long retval; - - __asm__ __volatile__ ( - " .align 2 \n\t" - " mova 1f, r0 \n\t" /* r0 = end point */ - " nop \n\t" - " mov r15, r1 \n\t" /* r1 = saved sp */ - " mov #-8, r15 \n\t" /* LOGIN */ - " mov.l @%1, %0 \n\t" /* load old value */ - " cmp/eq %0, %2 \n\t" - " bf 1f \n\t" /* if not equal */ - " mov.l %2, @%1 \n\t" /* store new value */ - "1: mov r1, r15 \n\t" /* LOGOUT */ - : "=&r" (retval), - "+r" (m) - : "r" (new) - : "memory" , "r0", "r1", "t"); - - return retval; -} - -#endif /* __ASM_SH_CMPXCHG_GRB_H */ diff --git a/include/asm-sh/cmpxchg-irq.h b/include/asm-sh/cmpxchg-irq.h deleted file mode 100644 index 43049ec0554..00000000000 --- a/include/asm-sh/cmpxchg-irq.h +++ /dev/null @@ -1,40 +0,0 @@ -#ifndef __ASM_SH_CMPXCHG_IRQ_H -#define __ASM_SH_CMPXCHG_IRQ_H - -static inline unsigned long xchg_u32(volatile u32 *m, unsigned long val) -{ - unsigned long flags, retval; - - local_irq_save(flags); - retval = *m; - *m = val; - local_irq_restore(flags); - return retval; -} - -static inline unsigned long xchg_u8(volatile u8 *m, unsigned long val) -{ - unsigned long flags, retval; - - local_irq_save(flags); - retval = *m; - *m = val & 0xff; - local_irq_restore(flags); - return retval; -} - -static inline unsigned long __cmpxchg_u32(volatile int *m, unsigned long old, - unsigned long new) -{ - __u32 retval; - unsigned long flags; - - local_irq_save(flags); - retval = *m; - if (retval == old) - *m = new; - local_irq_restore(flags); /* implies memory barrier */ - return retval; -} - -#endif /* __ASM_SH_CMPXCHG_IRQ_H */ diff --git a/include/asm-sh/cpu-features.h b/include/asm-sh/cpu-features.h deleted file mode 100644 index 86308aa3973..00000000000 --- a/include/asm-sh/cpu-features.h +++ /dev/null @@ -1,25 +0,0 @@ -#ifndef __ASM_SH_CPU_FEATURES_H -#define __ASM_SH_CPU_FEATURES_H - -/* - * Processor flags - * - * Note: When adding a new flag, keep cpu_flags[] in - * arch/sh/kernel/setup.c in sync so symbolic name - * mapping of the processor flags has a chance of being - * reasonably accurate. - * - * These flags are also available through the ELF - * auxiliary vector as AT_HWCAP. - */ -#define CPU_HAS_FPU 0x0001 /* Hardware FPU support */ -#define CPU_HAS_P2_FLUSH_BUG 0x0002 /* Need to flush the cache in P2 area */ -#define CPU_HAS_MMU_PAGE_ASSOC 0x0004 /* SH3: TLB way selection bit support */ -#define CPU_HAS_DSP 0x0008 /* SH-DSP: DSP support */ -#define CPU_HAS_PERF_COUNTER 0x0010 /* Hardware performance counters */ -#define CPU_HAS_PTEA 0x0020 /* PTEA register */ -#define CPU_HAS_LLSC 0x0040 /* movli.l/movco.l */ -#define CPU_HAS_L2_CACHE 0x0080 /* Secondary cache / URAM */ -#define CPU_HAS_OP32 0x0100 /* 32-bit instruction support */ - -#endif /* __ASM_SH_CPU_FEATURES_H */ diff --git a/include/asm-sh/cpu-sh2/addrspace.h b/include/asm-sh/cpu-sh2/addrspace.h deleted file mode 100644 index 2b9ab93efa4..00000000000 --- a/include/asm-sh/cpu-sh2/addrspace.h +++ /dev/null @@ -1,19 +0,0 @@ -/* - * Definitions for the address spaces of the SH-2 CPUs. - * - * Copyright (C) 2003 Paul Mundt - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ -#ifndef __ASM_CPU_SH2_ADDRSPACE_H -#define __ASM_CPU_SH2_ADDRSPACE_H - -#define P0SEG 0x00000000 -#define P1SEG 0x80000000 -#define P2SEG 0xa0000000 -#define P3SEG 0xc0000000 -#define P4SEG 0xe0000000 - -#endif /* __ASM_CPU_SH2_ADDRSPACE_H */ diff --git a/include/asm-sh/cpu-sh2/cache.h b/include/asm-sh/cpu-sh2/cache.h deleted file mode 100644 index 4e0b1650068..00000000000 --- a/include/asm-sh/cpu-sh2/cache.h +++ /dev/null @@ -1,41 +0,0 @@ -/* - * include/asm-sh/cpu-sh2/cache.h - * - * Copyright (C) 2003 Paul Mundt - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ -#ifndef __ASM_CPU_SH2_CACHE_H -#define __ASM_CPU_SH2_CACHE_H - -#define L1_CACHE_SHIFT 4 - -#define SH_CACHE_VALID 1 -#define SH_CACHE_UPDATED 2 -#define SH_CACHE_COMBINED 4 -#define SH_CACHE_ASSOC 8 - -#if defined(CONFIG_CPU_SUBTYPE_SH7619) -#define CCR 0xffffffec - -#define CCR_CACHE_CE 0x01 /* Cache enable */ -#define CCR_CACHE_WT 0x06 /* CCR[bit1=1,bit2=1] */ - /* 0x00000000-0x7fffffff: Write-through */ - /* 0x80000000-0x9fffffff: Write-back */ - /* 0xc0000000-0xdfffffff: Write-through */ -#define CCR_CACHE_CB 0x00 /* CCR[bit1=0,bit2=0] */ - /* 0x00000000-0x7fffffff: Write-back */ - /* 0x80000000-0x9fffffff: Write-through */ - /* 0xc0000000-0xdfffffff: Write-back */ -#define CCR_CACHE_CF 0x08 /* Cache invalidate */ - -#define CACHE_OC_ADDRESS_ARRAY 0xf0000000 -#define CACHE_OC_DATA_ARRAY 0xf1000000 - -#define CCR_CACHE_ENABLE CCR_CACHE_CE -#define CCR_CACHE_INVALIDATE CCR_CACHE_CF -#endif - -#endif /* __ASM_CPU_SH2_CACHE_H */ diff --git a/include/asm-sh/cpu-sh2/cacheflush.h b/include/asm-sh/cpu-sh2/cacheflush.h deleted file mode 100644 index 2979efb26de..00000000000 --- a/include/asm-sh/cpu-sh2/cacheflush.h +++ /dev/null @@ -1,44 +0,0 @@ -/* - * include/asm-sh/cpu-sh2/cacheflush.h - * - * Copyright (C) 2003 Paul Mundt - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ -#ifndef __ASM_CPU_SH2_CACHEFLUSH_H -#define __ASM_CPU_SH2_CACHEFLUSH_H - -/* - * Cache flushing: - * - * - flush_cache_all() flushes entire cache - * - flush_cache_mm(mm) flushes the specified mm context's cache lines - * - flush_cache_dup mm(mm) handles cache flushing when forking - * - flush_cache_page(mm, vmaddr, pfn) flushes a single page - * - flush_cache_range(vma, start, end) flushes a range of pages - * - * - flush_dcache_page(pg) flushes(wback&invalidates) a page for dcache - * - flush_icache_range(start, end) flushes(invalidates) a range for icache - * - flush_icache_page(vma, pg) flushes(invalidates) a page for icache - * - * Caches are indexed (effectively) by physical address on SH-2, so - * we don't need them. - */ -#define flush_cache_all() do { } while (0) -#define flush_cache_mm(mm) do { } while (0) -#define flush_cache_dup_mm(mm) do { } while (0) -#define flush_cache_range(vma, start, end) do { } while (0) -#define flush_cache_page(vma, vmaddr, pfn) do { } while (0) -#define flush_dcache_page(page) do { } while (0) -#define flush_dcache_mmap_lock(mapping) do { } while (0) -#define flush_dcache_mmap_unlock(mapping) do { } while (0) -#define flush_icache_range(start, end) do { } while (0) -#define flush_icache_page(vma,pg) do { } while (0) -#define flush_icache_user_range(vma,pg,adr,len) do { } while (0) -#define flush_cache_sigtramp(vaddr) do { } while (0) - -#define p3_cache_init() do { } while (0) -#endif /* __ASM_CPU_SH2_CACHEFLUSH_H */ - diff --git a/include/asm-sh/cpu-sh2/dma.h b/include/asm-sh/cpu-sh2/dma.h deleted file mode 100644 index d66b43cdc63..00000000000 --- a/include/asm-sh/cpu-sh2/dma.h +++ /dev/null @@ -1,23 +0,0 @@ -/* - * Definitions for the SH-2 DMAC. - * - * Copyright (C) 2003 Paul Mundt - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ -#ifndef __ASM_CPU_SH2_DMA_H -#define __ASM_CPU_SH2_DMA_H - -#define SH_MAX_DMA_CHANNELS 2 - -#define SAR ((unsigned long[]){ 0xffffff80, 0xffffff90 }) -#define DAR ((unsigned long[]){ 0xffffff84, 0xffffff94 }) -#define DMATCR ((unsigned long[]){ 0xffffff88, 0xffffff98 }) -#define CHCR ((unsigned long[]){ 0xfffffffc, 0xffffff9c }) - -#define DMAOR 0xffffffb0 - -#endif /* __ASM_CPU_SH2_DMA_H */ - diff --git a/include/asm-sh/cpu-sh2/freq.h b/include/asm-sh/cpu-sh2/freq.h deleted file mode 100644 index 31de475da70..00000000000 --- a/include/asm-sh/cpu-sh2/freq.h +++ /dev/null @@ -1,18 +0,0 @@ -/* - * include/asm-sh/cpu-sh2/freq.h - * - * Copyright (C) 2006 Yoshinori Sato - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ -#ifndef __ASM_CPU_SH2_FREQ_H -#define __ASM_CPU_SH2_FREQ_H - -#if defined(CONFIG_CPU_SUBTYPE_SH7619) -#define FREQCR 0xf815ff80 -#endif - -#endif /* __ASM_CPU_SH2_FREQ_H */ - diff --git a/include/asm-sh/cpu-sh2/mmu_context.h b/include/asm-sh/cpu-sh2/mmu_context.h deleted file mode 100644 index beeb299e01e..00000000000 --- a/include/asm-sh/cpu-sh2/mmu_context.h +++ /dev/null @@ -1,16 +0,0 @@ -/* - * include/asm-sh/cpu-sh2/mmu_context.h - * - * Copyright (C) 2003 Paul Mundt - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ -#ifndef __ASM_CPU_SH2_MMU_CONTEXT_H -#define __ASM_CPU_SH2_MMU_CONTEXT_H - -/* No MMU */ - -#endif /* __ASM_CPU_SH2_MMU_CONTEXT_H */ - diff --git a/include/asm-sh/cpu-sh2/rtc.h b/include/asm-sh/cpu-sh2/rtc.h deleted file mode 100644 index 39e2d6e9478..00000000000 --- a/include/asm-sh/cpu-sh2/rtc.h +++ /dev/null @@ -1,8 +0,0 @@ -#ifndef __ASM_SH_CPU_SH2_RTC_H -#define __ASM_SH_CPU_SH2_RTC_H - -#define rtc_reg_size sizeof(u16) -#define RTC_BIT_INVERTED 0 -#define RTC_DEF_CAPABILITIES 0UL - -#endif /* __ASM_SH_CPU_SH2_RTC_H */ diff --git a/include/asm-sh/cpu-sh2/sigcontext.h b/include/asm-sh/cpu-sh2/sigcontext.h deleted file mode 100644 index fe5c15dd6e8..00000000000 --- a/include/asm-sh/cpu-sh2/sigcontext.h +++ /dev/null @@ -1,17 +0,0 @@ -#ifndef __ASM_CPU_SH2_SIGCONTEXT_H -#define __ASM_CPU_SH2_SIGCONTEXT_H - -struct sigcontext { - unsigned long oldmask; - - /* CPU registers */ - unsigned long sc_regs[16]; - unsigned long sc_pc; - unsigned long sc_pr; - unsigned long sc_sr; - unsigned long sc_gbr; - unsigned long sc_mach; - unsigned long sc_macl; -}; - -#endif /* __ASM_CPU_SH2_SIGCONTEXT_H */ diff --git a/include/asm-sh/cpu-sh2/timer.h b/include/asm-sh/cpu-sh2/timer.h deleted file mode 100644 index a39c241e819..00000000000 --- a/include/asm-sh/cpu-sh2/timer.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef __ASM_CPU_SH2_TIMER_H -#define __ASM_CPU_SH2_TIMER_H - -/* Nothing needed yet */ - -#endif /* __ASM_CPU_SH2_TIMER_H */ diff --git a/include/asm-sh/cpu-sh2/ubc.h b/include/asm-sh/cpu-sh2/ubc.h deleted file mode 100644 index ba0e87f19c7..00000000000 --- a/include/asm-sh/cpu-sh2/ubc.h +++ /dev/null @@ -1,32 +0,0 @@ -/* - * include/asm-sh/cpu-sh2/ubc.h - * - * Copyright (C) 2003 Paul Mundt - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ -#ifndef __ASM_CPU_SH2_UBC_H -#define __ASM_CPU_SH2_UBC_H - -#define UBC_BARA 0xffffff40 -#define UBC_BAMRA 0xffffff44 -#define UBC_BBRA 0xffffff48 -#define UBC_BARB 0xffffff60 -#define UBC_BAMRB 0xffffff64 -#define UBC_BBRB 0xffffff68 -#define UBC_BDRB 0xffffff70 -#define UBC_BDMRB 0xffffff74 -#define UBC_BRCR 0xffffff78 - -/* - * We don't have any ASID changes to make in the UBC on the SH-2. - * - * Make these purposely invalid to track misuse. - */ -#define UBC_BASRA 0x00000000 -#define UBC_BASRB 0x00000000 - -#endif /* __ASM_CPU_SH2_UBC_H */ - diff --git a/include/asm-sh/cpu-sh2/watchdog.h b/include/asm-sh/cpu-sh2/watchdog.h deleted file mode 100644 index 393161c9c6d..00000000000 --- a/include/asm-sh/cpu-sh2/watchdog.h +++ /dev/null @@ -1,69 +0,0 @@ -/* - * include/asm-sh/cpu-sh2/watchdog.h - * - * Copyright (C) 2002, 2003 Paul Mundt - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ -#ifndef __ASM_CPU_SH2_WATCHDOG_H -#define __ASM_CPU_SH2_WATCHDOG_H - -/* - * More SH-2 brilliance .. its not good enough that we can't read - * and write the same sizes to WTCNT, now we have to read and write - * with different sizes at different addresses for WTCNT _and_ RSTCSR. - * - * At least on the bright side no one has managed to screw over WTCSR - * in this fashion .. yet. - */ -/* Register definitions */ -#define WTCNT 0xfffffe80 -#define WTCSR 0xfffffe80 -#define RSTCSR 0xfffffe82 - -#define WTCNT_R (WTCNT + 1) -#define RSTCSR_R (RSTCSR + 1) - -/* Bit definitions */ -#define WTCSR_IOVF 0x80 -#define WTCSR_WT 0x40 -#define WTCSR_TME 0x20 -#define WTCSR_RSTS 0x00 - -#define RSTCSR_RSTS 0x20 - -/** - * sh_wdt_read_rstcsr - Read from Reset Control/Status Register - * - * Reads back the RSTCSR value. - */ -static inline __u8 sh_wdt_read_rstcsr(void) -{ - /* - * Same read/write brain-damage as for WTCNT here.. - */ - return ctrl_inb(RSTCSR_R); -} - -/** - * sh_wdt_write_csr - Write to Reset Control/Status Register - * - * @val: Value to write - * - * Writes the given value @val to the lower byte of the control/status - * register. The upper byte is set manually on each write. - */ -static inline void sh_wdt_write_rstcsr(__u8 val) -{ - /* - * Note: Due to the brain-damaged nature of this register, - * we can't presently touch the WOVF bit, since the upper byte - * has to be swapped for this. So just leave it alone.. - */ - ctrl_outw((WTCNT_HIGH << 8) | (__u16)val, RSTCSR); -} - -#endif /* __ASM_CPU_SH2_WATCHDOG_H */ - diff --git a/include/asm-sh/cpu-sh2a/addrspace.h b/include/asm-sh/cpu-sh2a/addrspace.h deleted file mode 100644 index 795ddd6856a..00000000000 --- a/include/asm-sh/cpu-sh2a/addrspace.h +++ /dev/null @@ -1,10 +0,0 @@ -#ifndef __ASM_SH_CPU_SH2A_ADDRSPACE_H -#define __ASM_SH_CPU_SH2A_ADDRSPACE_H - -#define P0SEG 0x00000000 -#define P1SEG 0x00000000 -#define P2SEG 0x20000000 -#define P3SEG 0x00000000 -#define P4SEG 0x80000000 - -#endif /* __ASM_SH_CPU_SH2A_ADDRSPACE_H */ diff --git a/include/asm-sh/cpu-sh2a/cache.h b/include/asm-sh/cpu-sh2a/cache.h deleted file mode 100644 index afe228b3f49..00000000000 --- a/include/asm-sh/cpu-sh2a/cache.h +++ /dev/null @@ -1,40 +0,0 @@ -/* - * include/asm-sh/cpu-sh2a/cache.h - * - * Copyright (C) 2004 Paul Mundt - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ -#ifndef __ASM_CPU_SH2A_CACHE_H -#define __ASM_CPU_SH2A_CACHE_H - -#define L1_CACHE_SHIFT 4 - -#define SH_CACHE_VALID 1 -#define SH_CACHE_UPDATED 2 -#define SH_CACHE_COMBINED 4 -#define SH_CACHE_ASSOC 8 - -#define CCR 0xfffc1000 /* CCR1 */ -#define CCR2 0xfffc1004 - -/* - * Most of the SH-2A CCR1 definitions resemble the SH-4 ones. All others not - * listed here are reserved. - */ -#define CCR_CACHE_CB 0x0000 /* Hack */ -#define CCR_CACHE_OCE 0x0001 -#define CCR_CACHE_WT 0x0002 -#define CCR_CACHE_OCI 0x0008 /* OCF */ -#define CCR_CACHE_ICE 0x0100 -#define CCR_CACHE_ICI 0x0800 /* ICF */ - -#define CACHE_IC_ADDRESS_ARRAY 0xf0000000 -#define CACHE_OC_ADDRESS_ARRAY 0xf0800000 - -#define CCR_CACHE_ENABLE (CCR_CACHE_OCE | CCR_CACHE_ICE) -#define CCR_CACHE_INVALIDATE (CCR_CACHE_OCI | CCR_CACHE_ICI) - -#endif /* __ASM_CPU_SH2A_CACHE_H */ diff --git a/include/asm-sh/cpu-sh2a/cacheflush.h b/include/asm-sh/cpu-sh2a/cacheflush.h deleted file mode 100644 index fa3186c7335..00000000000 --- a/include/asm-sh/cpu-sh2a/cacheflush.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/include/asm-sh/cpu-sh2a/dma.h b/include/asm-sh/cpu-sh2a/dma.h deleted file mode 100644 index 0d5ad85c1de..00000000000 --- a/include/asm-sh/cpu-sh2a/dma.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/include/asm-sh/cpu-sh2a/freq.h b/include/asm-sh/cpu-sh2a/freq.h deleted file mode 100644 index 830fd43b6cd..00000000000 --- a/include/asm-sh/cpu-sh2a/freq.h +++ /dev/null @@ -1,16 +0,0 @@ -/* - * include/asm-sh/cpu-sh2a/freq.h - * - * Copyright (C) 2006 Yoshinori Sato - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ -#ifndef __ASM_CPU_SH2A_FREQ_H -#define __ASM_CPU_SH2A_FREQ_H - -#define FREQCR 0xfffe0010 - -#endif /* __ASM_CPU_SH2A_FREQ_H */ - diff --git a/include/asm-sh/cpu-sh2a/mmu_context.h b/include/asm-sh/cpu-sh2a/mmu_context.h deleted file mode 100644 index cd2387f7db9..00000000000 --- a/include/asm-sh/cpu-sh2a/mmu_context.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/include/asm-sh/cpu-sh2a/rtc.h b/include/asm-sh/cpu-sh2a/rtc.h deleted file mode 100644 index afb511e2bed..00000000000 --- a/include/asm-sh/cpu-sh2a/rtc.h +++ /dev/null @@ -1,8 +0,0 @@ -#ifndef __ASM_SH_CPU_SH2A_RTC_H -#define __ASM_SH_CPU_SH2A_RTC_H - -#define rtc_reg_size sizeof(u16) -#define RTC_BIT_INVERTED 0 -#define RTC_DEF_CAPABILITIES RTC_CAP_4_DIGIT_YEAR - -#endif /* __ASM_SH_CPU_SH2A_RTC_H */ diff --git a/include/asm-sh/cpu-sh2a/timer.h b/include/asm-sh/cpu-sh2a/timer.h deleted file mode 100644 index fee504adf11..00000000000 --- a/include/asm-sh/cpu-sh2a/timer.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/include/asm-sh/cpu-sh2a/ubc.h b/include/asm-sh/cpu-sh2a/ubc.h deleted file mode 100644 index cf28062b96a..00000000000 --- a/include/asm-sh/cpu-sh2a/ubc.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/include/asm-sh/cpu-sh2a/watchdog.h b/include/asm-sh/cpu-sh2a/watchdog.h deleted file mode 100644 index c1b3e248847..00000000000 --- a/include/asm-sh/cpu-sh2a/watchdog.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/include/asm-sh/cpu-sh3/adc.h b/include/asm-sh/cpu-sh3/adc.h deleted file mode 100644 index b289e3ca19a..00000000000 --- a/include/asm-sh/cpu-sh3/adc.h +++ /dev/null @@ -1,28 +0,0 @@ -#ifndef __ASM_CPU_SH3_ADC_H -#define __ASM_CPU_SH3_ADC_H - -/* - * Copyright (C) 2004 Andriy Skulysh - */ - - -#define ADDRAH 0xa4000080 -#define ADDRAL 0xa4000082 -#define ADDRBH 0xa4000084 -#define ADDRBL 0xa4000086 -#define ADDRCH 0xa4000088 -#define ADDRCL 0xa400008a -#define ADDRDH 0xa400008c -#define ADDRDL 0xa400008e -#define ADCSR 0xa4000090 - -#define ADCSR_ADF 0x80 -#define ADCSR_ADIE 0x40 -#define ADCSR_ADST 0x20 -#define ADCSR_MULTI 0x10 -#define ADCSR_CKS 0x08 -#define ADCSR_CH_MASK 0x07 - -#define ADCR 0xa4000092 - -#endif /* __ASM_CPU_SH3_ADC_H */ diff --git a/include/asm-sh/cpu-sh3/addrspace.h b/include/asm-sh/cpu-sh3/addrspace.h deleted file mode 100644 index 0f94726c7d6..00000000000 --- a/include/asm-sh/cpu-sh3/addrspace.h +++ /dev/null @@ -1,19 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 1999 by Kaz Kojima - * - * Defitions for the address spaces of the SH-3 CPUs. - */ -#ifndef __ASM_CPU_SH3_ADDRSPACE_H -#define __ASM_CPU_SH3_ADDRSPACE_H - -#define P0SEG 0x00000000 -#define P1SEG 0x80000000 -#define P2SEG 0xa0000000 -#define P3SEG 0xc0000000 -#define P4SEG 0xe0000000 - -#endif /* __ASM_CPU_SH3_ADDRSPACE_H */ diff --git a/include/asm-sh/cpu-sh3/cache.h b/include/asm-sh/cpu-sh3/cache.h deleted file mode 100644 index bee2d81c56b..00000000000 --- a/include/asm-sh/cpu-sh3/cache.h +++ /dev/null @@ -1,43 +0,0 @@ -/* - * include/asm-sh/cpu-sh3/cache.h - * - * Copyright (C) 1999 Niibe Yutaka - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ -#ifndef __ASM_CPU_SH3_CACHE_H -#define __ASM_CPU_SH3_CACHE_H - -#define L1_CACHE_SHIFT 4 - -#define SH_CACHE_VALID 1 -#define SH_CACHE_UPDATED 2 -#define SH_CACHE_COMBINED 4 -#define SH_CACHE_ASSOC 8 - -#define CCR 0xffffffec /* Address of Cache Control Register */ - -#define CCR_CACHE_CE 0x01 /* Cache Enable */ -#define CCR_CACHE_WT 0x02 /* Write-Through (for P0,U0,P3) (else writeback) */ -#define CCR_CACHE_CB 0x04 /* Write-Back (for P1) (else writethrough) */ -#define CCR_CACHE_CF 0x08 /* Cache Flush */ -#define CCR_CACHE_ORA 0x20 /* RAM mode */ - -#define CACHE_OC_ADDRESS_ARRAY 0xf0000000 -#define CACHE_PHYSADDR_MASK 0x1ffffc00 - -#define CCR_CACHE_ENABLE CCR_CACHE_CE -#define CCR_CACHE_INVALIDATE CCR_CACHE_CF - -#if defined(CONFIG_CPU_SUBTYPE_SH7705) || \ - defined(CONFIG_CPU_SUBTYPE_SH7710) || \ - defined(CONFIG_CPU_SUBTYPE_SH7720) || \ - defined(CONFIG_CPU_SUBTYPE_SH7721) -#define CCR3_REG 0xa40000b4 -#define CCR_CACHE_16KB 0x00010000 -#define CCR_CACHE_32KB 0x00020000 -#endif - -#endif /* __ASM_CPU_SH3_CACHE_H */ diff --git a/include/asm-sh/cpu-sh3/cacheflush.h b/include/asm-sh/cpu-sh3/cacheflush.h deleted file mode 100644 index f70d8ef76a1..00000000000 --- a/include/asm-sh/cpu-sh3/cacheflush.h +++ /dev/null @@ -1,70 +0,0 @@ -/* - * include/asm-sh/cpu-sh3/cacheflush.h - * - * Copyright (C) 1999 Niibe Yutaka - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ -#ifndef __ASM_CPU_SH3_CACHEFLUSH_H -#define __ASM_CPU_SH3_CACHEFLUSH_H - -/* - * Cache flushing: - * - * - flush_cache_all() flushes entire cache - * - flush_cache_mm(mm) flushes the specified mm context's cache lines - * - flush_cache_dup mm(mm) handles cache flushing when forking - * - flush_cache_page(mm, vmaddr, pfn) flushes a single page - * - flush_cache_range(vma, start, end) flushes a range of pages - * - * - flush_dcache_page(pg) flushes(wback&invalidates) a page for dcache - * - flush_icache_range(start, end) flushes(invalidates) a range for icache - * - flush_icache_page(vma, pg) flushes(invalidates) a page for icache - * - * Caches are indexed (effectively) by physical address on SH-3, so - * we don't need them. - */ - -#if defined(CONFIG_SH7705_CACHE_32KB) - -/* SH7705 is an SH3 processor with 32KB cache. This has alias issues like the - * SH4. Unlike the SH4 this is a unified cache so we need to do some work - * in mmap when 'exec'ing a new binary - */ - /* 32KB cache, 4kb PAGE sizes need to check bit 12 */ -#define CACHE_ALIAS 0x00001000 - -#define PG_mapped PG_arch_1 - -void flush_cache_all(void); -void flush_cache_mm(struct mm_struct *mm); -#define flush_cache_dup_mm(mm) flush_cache_mm(mm) -void flush_cache_range(struct vm_area_struct *vma, unsigned long start, - unsigned long end); -void flush_cache_page(struct vm_area_struct *vma, unsigned long addr, unsigned long pfn); -void flush_dcache_page(struct page *pg); -void flush_icache_range(unsigned long start, unsigned long end); -void flush_icache_page(struct vm_area_struct *vma, struct page *page); -#else -#define flush_cache_all() do { } while (0) -#define flush_cache_mm(mm) do { } while (0) -#define flush_cache_dup_mm(mm) do { } while (0) -#define flush_cache_range(vma, start, end) do { } while (0) -#define flush_cache_page(vma, vmaddr, pfn) do { } while (0) -#define flush_dcache_page(page) do { } while (0) -#define flush_icache_range(start, end) do { } while (0) -#define flush_icache_page(vma,pg) do { } while (0) -#endif - -#define flush_dcache_mmap_lock(mapping) do { } while (0) -#define flush_dcache_mmap_unlock(mapping) do { } while (0) - -/* SH3 has unified cache so no special action needed here */ -#define flush_cache_sigtramp(vaddr) do { } while (0) -#define flush_icache_user_range(vma,pg,adr,len) do { } while (0) - -#define p3_cache_init() do { } while (0) - -#endif /* __ASM_CPU_SH3_CACHEFLUSH_H */ diff --git a/include/asm-sh/cpu-sh3/dac.h b/include/asm-sh/cpu-sh3/dac.h deleted file mode 100644 index 05fda8316eb..00000000000 --- a/include/asm-sh/cpu-sh3/dac.h +++ /dev/null @@ -1,41 +0,0 @@ -#ifndef __ASM_CPU_SH3_DAC_H -#define __ASM_CPU_SH3_DAC_H - -/* - * Copyright (C) 2003 Andriy Skulysh - */ - - -#define DADR0 0xa40000a0 -#define DADR1 0xa40000a2 -#define DACR 0xa40000a4 -#define DACR_DAOE1 0x80 -#define DACR_DAOE0 0x40 -#define DACR_DAE 0x20 - - -static __inline__ void sh_dac_enable(int channel) -{ - unsigned char v; - v = ctrl_inb(DACR); - if(channel) v |= DACR_DAOE1; - else v |= DACR_DAOE0; - ctrl_outb(v,DACR); -} - -static __inline__ void sh_dac_disable(int channel) -{ - unsigned char v; - v = ctrl_inb(DACR); - if(channel) v &= ~DACR_DAOE1; - else v &= ~DACR_DAOE0; - ctrl_outb(v,DACR); -} - -static __inline__ void sh_dac_output(u8 value, int channel) -{ - if(channel) ctrl_outb(value,DADR1); - else ctrl_outb(value,DADR0); -} - -#endif /* __ASM_CPU_SH3_DAC_H */ diff --git a/include/asm-sh/cpu-sh3/dma.h b/include/asm-sh/cpu-sh3/dma.h deleted file mode 100644 index 6813c3220a1..00000000000 --- a/include/asm-sh/cpu-sh3/dma.h +++ /dev/null @@ -1,51 +0,0 @@ -#ifndef __ASM_CPU_SH3_DMA_H -#define __ASM_CPU_SH3_DMA_H - - -#if defined(CONFIG_CPU_SUBTYPE_SH7720) || \ - defined(CONFIG_CPU_SUBTYPE_SH7721) -#define SH_DMAC_BASE 0xa4010020 -#else -#define SH_DMAC_BASE 0xa4000020 -#endif - -#if defined(CONFIG_CPU_SUBTYPE_SH7720) || defined(CONFIG_CPU_SUBTYPE_SH7709) -#define DMTE0_IRQ 48 -#define DMTE1_IRQ 49 -#define DMTE2_IRQ 50 -#define DMTE3_IRQ 51 -#define DMTE4_IRQ 76 -#define DMTE5_IRQ 77 -#endif - -/* Definitions for the SuperH DMAC */ -#define TM_BURST 0x00000020 -#define TS_8 0x00000000 -#define TS_16 0x00000008 -#define TS_32 0x00000010 -#define TS_128 0x00000018 - -#define CHCR_TS_MASK 0x18 -#define CHCR_TS_SHIFT 3 - -#define DMAOR_INIT DMAOR_DME - -/* - * The SuperH DMAC supports a number of transmit sizes, we list them here, - * with their respective values as they appear in the CHCR registers. - */ -enum { - XMIT_SZ_8BIT, - XMIT_SZ_16BIT, - XMIT_SZ_32BIT, - XMIT_SZ_128BIT, -}; - -static unsigned int ts_shift[] __maybe_unused = { - [XMIT_SZ_8BIT] = 0, - [XMIT_SZ_16BIT] = 1, - [XMIT_SZ_32BIT] = 2, - [XMIT_SZ_128BIT] = 4, -}; - -#endif /* __ASM_CPU_SH3_DMA_H */ diff --git a/include/asm-sh/cpu-sh3/freq.h b/include/asm-sh/cpu-sh3/freq.h deleted file mode 100644 index 53c62302b2e..00000000000 --- a/include/asm-sh/cpu-sh3/freq.h +++ /dev/null @@ -1,27 +0,0 @@ -/* - * include/asm-sh/cpu-sh3/freq.h - * - * Copyright (C) 2002, 2003 Paul Mundt - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ -#ifndef __ASM_CPU_SH3_FREQ_H -#define __ASM_CPU_SH3_FREQ_H - -#ifdef CONFIG_CPU_SUBTYPE_SH7712 -#define FRQCR 0xA415FF80 -#else -#define FRQCR 0xffffff80 -#endif - -#define MIN_DIVISOR_NR 0 -#define MAX_DIVISOR_NR 4 - -#define FRQCR_CKOEN 0x0100 -#define FRQCR_PLLEN 0x0080 -#define FRQCR_PSTBY 0x0040 - -#endif /* __ASM_CPU_SH3_FREQ_H */ - diff --git a/include/asm-sh/cpu-sh3/gpio.h b/include/asm-sh/cpu-sh3/gpio.h deleted file mode 100644 index 4e53eb314b8..00000000000 --- a/include/asm-sh/cpu-sh3/gpio.h +++ /dev/null @@ -1,67 +0,0 @@ -/* - * include/asm-sh/cpu-sh3/gpio.h - * - * Copyright (C) 2007 Markus Brunner, Mark Jonas - * - * Addresses for the Pin Function Controller - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ -#ifndef _CPU_SH3_GPIO_H -#define _CPU_SH3_GPIO_H - -#if defined(CONFIG_CPU_SUBTYPE_SH7720) || \ - defined(CONFIG_CPU_SUBTYPE_SH7721) - -/* Control registers */ -#define PORT_PACR 0xA4050100UL -#define PORT_PBCR 0xA4050102UL -#define PORT_PCCR 0xA4050104UL -#define PORT_PDCR 0xA4050106UL -#define PORT_PECR 0xA4050108UL -#define PORT_PFCR 0xA405010AUL -#define PORT_PGCR 0xA405010CUL -#define PORT_PHCR 0xA405010EUL -#define PORT_PJCR 0xA4050110UL -#define PORT_PKCR 0xA4050112UL -#define PORT_PLCR 0xA4050114UL -#define PORT_PMCR 0xA4050116UL -#define PORT_PPCR 0xA4050118UL -#define PORT_PRCR 0xA405011AUL -#define PORT_PSCR 0xA405011CUL -#define PORT_PTCR 0xA405011EUL -#define PORT_PUCR 0xA4050120UL -#define PORT_PVCR 0xA4050122UL - -/* Data registers */ -#define PORT_PADR 0xA4050140UL -/* Address of PORT_PBDR is wrong in the datasheet, see errata 2005-09-21 */ -#define PORT_PBDR 0xA4050142UL -#define PORT_PCDR 0xA4050144UL -#define PORT_PDDR 0xA4050146UL -#define PORT_PEDR 0xA4050148UL -#define PORT_PFDR 0xA405014AUL -#define PORT_PGDR 0xA405014CUL -#define PORT_PHDR 0xA405014EUL -#define PORT_PJDR 0xA4050150UL -#define PORT_PKDR 0xA4050152UL -#define PORT_PLDR 0xA4050154UL -#define PORT_PMDR 0xA4050156UL -#define PORT_PPDR 0xA4050158UL -#define PORT_PRDR 0xA405015AUL -#define PORT_PSDR 0xA405015CUL -#define PORT_PTDR 0xA405015EUL -#define PORT_PUDR 0xA4050160UL -#define PORT_PVDR 0xA4050162UL - -/* Pin Select Registers */ -#define PORT_PSELA 0xA4050124UL -#define PORT_PSELB 0xA4050126UL -#define PORT_PSELC 0xA4050128UL -#define PORT_PSELD 0xA405012AUL - -#endif - -#endif diff --git a/include/asm-sh/cpu-sh3/mmu_context.h b/include/asm-sh/cpu-sh3/mmu_context.h deleted file mode 100644 index ab09da73ce7..00000000000 --- a/include/asm-sh/cpu-sh3/mmu_context.h +++ /dev/null @@ -1,44 +0,0 @@ -/* - * include/asm-sh/cpu-sh3/mmu_context.h - * - * Copyright (C) 1999 Niibe Yutaka - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ -#ifndef __ASM_CPU_SH3_MMU_CONTEXT_H -#define __ASM_CPU_SH3_MMU_CONTEXT_H - -#define MMU_PTEH 0xFFFFFFF0 /* Page table entry register HIGH */ -#define MMU_PTEL 0xFFFFFFF4 /* Page table entry register LOW */ -#define MMU_TTB 0xFFFFFFF8 /* Translation table base register */ -#define MMU_TEA 0xFFFFFFFC /* TLB Exception Address */ - -#define MMUCR 0xFFFFFFE0 /* MMU Control Register */ - -#define MMU_TLB_ADDRESS_ARRAY 0xF2000000 -#define MMU_PAGE_ASSOC_BIT 0x80 - -#define MMU_NTLB_ENTRIES 128 /* for 7708 */ -#define MMU_NTLB_WAYS 4 -#define MMU_CONTROL_INIT 0x007 /* SV=0, TF=1, IX=1, AT=1 */ - -#define TRA 0xffffffd0 -#define EXPEVT 0xffffffd4 - -#if defined(CONFIG_CPU_SUBTYPE_SH7705) || \ - defined(CONFIG_CPU_SUBTYPE_SH7706) || \ - defined(CONFIG_CPU_SUBTYPE_SH7707) || \ - defined(CONFIG_CPU_SUBTYPE_SH7709) || \ - defined(CONFIG_CPU_SUBTYPE_SH7710) || \ - defined(CONFIG_CPU_SUBTYPE_SH7712) || \ - defined(CONFIG_CPU_SUBTYPE_SH7720) || \ - defined(CONFIG_CPU_SUBTYPE_SH7721) -#define INTEVT 0xa4000000 /* INTEVTE2(0xa4000000) */ -#else -#define INTEVT 0xffffffd8 -#endif - -#endif /* __ASM_CPU_SH3_MMU_CONTEXT_H */ - diff --git a/include/asm-sh/cpu-sh3/rtc.h b/include/asm-sh/cpu-sh3/rtc.h deleted file mode 100644 index 319404aaee3..00000000000 --- a/include/asm-sh/cpu-sh3/rtc.h +++ /dev/null @@ -1,8 +0,0 @@ -#ifndef __ASM_SH_CPU_SH3_RTC_H -#define __ASM_SH_CPU_SH3_RTC_H - -#define rtc_reg_size sizeof(u16) -#define RTC_BIT_INVERTED 0 /* No bug on SH7708, SH7709A */ -#define RTC_DEF_CAPABILITIES 0UL - -#endif /* __ASM_SH_CPU_SH3_RTC_H */ diff --git a/include/asm-sh/cpu-sh3/sigcontext.h b/include/asm-sh/cpu-sh3/sigcontext.h deleted file mode 100644 index 17310dc03dc..00000000000 --- a/include/asm-sh/cpu-sh3/sigcontext.h +++ /dev/null @@ -1,17 +0,0 @@ -#ifndef __ASM_CPU_SH3_SIGCONTEXT_H -#define __ASM_CPU_SH3_SIGCONTEXT_H - -struct sigcontext { - unsigned long oldmask; - - /* CPU registers */ - unsigned long sc_regs[16]; - unsigned long sc_pc; - unsigned long sc_pr; - unsigned long sc_sr; - unsigned long sc_gbr; - unsigned long sc_mach; - unsigned long sc_macl; -}; - -#endif /* __ASM_CPU_SH3_SIGCONTEXT_H */ diff --git a/include/asm-sh/cpu-sh3/timer.h b/include/asm-sh/cpu-sh3/timer.h deleted file mode 100644 index 793acf12aa0..00000000000 --- a/include/asm-sh/cpu-sh3/timer.h +++ /dev/null @@ -1,67 +0,0 @@ -/* - * include/asm-sh/cpu-sh3/timer.h - * - * Copyright (C) 2004 Lineo Solutions, Inc. - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ -#ifndef __ASM_CPU_SH3_TIMER_H -#define __ASM_CPU_SH3_TIMER_H - -/* - * --------------------------------------------------------------------------- - * TMU Common definitions for SH3 processors - * SH7706 - * SH7709S - * SH7727 - * SH7729R - * SH7710 - * SH7720 - * SH7710 - * --------------------------------------------------------------------------- - */ - -#if !defined(CONFIG_CPU_SUBTYPE_SH7720) && !defined(CONFIG_CPU_SUBTYPE_SH7721) -#define TMU_TOCR 0xfffffe90 /* Byte access */ -#endif - -#if defined(CONFIG_CPU_SUBTYPE_SH7710) || \ - defined(CONFIG_CPU_SUBTYPE_SH7720) || \ - defined(CONFIG_CPU_SUBTYPE_SH7721) -#define TMU_012_TSTR 0xa412fe92 /* Byte access */ - -#define TMU0_TCOR 0xa412fe94 /* Long access */ -#define TMU0_TCNT 0xa412fe98 /* Long access */ -#define TMU0_TCR 0xa412fe9c /* Word access */ - -#define TMU1_TCOR 0xa412fea0 /* Long access */ -#define TMU1_TCNT 0xa412fea4 /* Long access */ -#define TMU1_TCR 0xa412fea8 /* Word access */ - -#define TMU2_TCOR 0xa412feac /* Long access */ -#define TMU2_TCNT 0xa412feb0 /* Long access */ -#define TMU2_TCR 0xa412feb4 /* Word access */ - -#else -#define TMU_012_TSTR 0xfffffe92 /* Byte access */ - -#define TMU0_TCOR 0xfffffe94 /* Long access */ -#define TMU0_TCNT 0xfffffe98 /* Long access */ -#define TMU0_TCR 0xfffffe9c /* Word access */ - -#define TMU1_TCOR 0xfffffea0 /* Long access */ -#define TMU1_TCNT 0xfffffea4 /* Long access */ -#define TMU1_TCR 0xfffffea8 /* Word access */ - -#define TMU2_TCOR 0xfffffeac /* Long access */ -#define TMU2_TCNT 0xfffffeb0 /* Long access */ -#define TMU2_TCR 0xfffffeb4 /* Word access */ -#if !defined(CONFIG_CPU_SUBTYPE_SH7720) && !defined(CONFIG_CPU_SUBTYPE_SH7721) -#define TMU2_TCPR2 0xfffffeb8 /* Long access */ -#endif -#endif - -#endif /* __ASM_CPU_SH3_TIMER_H */ - diff --git a/include/asm-sh/cpu-sh3/ubc.h b/include/asm-sh/cpu-sh3/ubc.h deleted file mode 100644 index 4e6381d5ff7..00000000000 --- a/include/asm-sh/cpu-sh3/ubc.h +++ /dev/null @@ -1,42 +0,0 @@ -/* - * include/asm-sh/cpu-sh3/ubc.h - * - * Copyright (C) 1999 Niibe Yutaka - * Copyright (C) 2003 Paul Mundt - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ -#ifndef __ASM_CPU_SH3_UBC_H -#define __ASM_CPU_SH3_UBC_H - -#if defined(CONFIG_CPU_SUBTYPE_SH7710) || \ - defined(CONFIG_CPU_SUBTYPE_SH7720) || \ - defined(CONFIG_CPU_SUBTYPE_SH7721) -#define UBC_BARA 0xa4ffffb0 -#define UBC_BAMRA 0xa4ffffb4 -#define UBC_BBRA 0xa4ffffb8 -#define UBC_BASRA 0xffffffe4 -#define UBC_BARB 0xa4ffffa0 -#define UBC_BAMRB 0xa4ffffa4 -#define UBC_BBRB 0xa4ffffa8 -#define UBC_BASRB 0xffffffe8 -#define UBC_BDRB 0xa4ffff90 -#define UBC_BDMRB 0xa4ffff94 -#define UBC_BRCR 0xa4ffff98 -#else -#define UBC_BARA 0xffffffb0 -#define UBC_BAMRA 0xffffffb4 -#define UBC_BBRA 0xffffffb8 -#define UBC_BASRA 0xffffffe4 -#define UBC_BARB 0xffffffa0 -#define UBC_BAMRB 0xffffffa4 -#define UBC_BBRB 0xffffffa8 -#define UBC_BASRB 0xffffffe8 -#define UBC_BDRB 0xffffff90 -#define UBC_BDMRB 0xffffff94 -#define UBC_BRCR 0xffffff98 -#endif - -#endif /* __ASM_CPU_SH3_UBC_H */ diff --git a/include/asm-sh/cpu-sh3/watchdog.h b/include/asm-sh/cpu-sh3/watchdog.h deleted file mode 100644 index 4ee0347298d..00000000000 --- a/include/asm-sh/cpu-sh3/watchdog.h +++ /dev/null @@ -1,25 +0,0 @@ -/* - * include/asm-sh/cpu-sh3/watchdog.h - * - * Copyright (C) 2002, 2003 Paul Mundt - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ -#ifndef __ASM_CPU_SH3_WATCHDOG_H -#define __ASM_CPU_SH3_WATCHDOG_H - -/* Register definitions */ -#define WTCNT 0xffffff84 -#define WTCSR 0xffffff86 - -/* Bit definitions */ -#define WTCSR_TME 0x80 -#define WTCSR_WT 0x40 -#define WTCSR_RSTS 0x20 -#define WTCSR_WOVF 0x10 -#define WTCSR_IOVF 0x08 - -#endif /* __ASM_CPU_SH3_WATCHDOG_H */ - diff --git a/include/asm-sh/cpu-sh4/addrspace.h b/include/asm-sh/cpu-sh4/addrspace.h deleted file mode 100644 index a3fa733c1c7..00000000000 --- a/include/asm-sh/cpu-sh4/addrspace.h +++ /dev/null @@ -1,35 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 1999 by Kaz Kojima - * - * Defitions for the address spaces of the SH-4 CPUs. - */ -#ifndef __ASM_CPU_SH4_ADDRSPACE_H -#define __ASM_CPU_SH4_ADDRSPACE_H - -#define P0SEG 0x00000000 -#define P1SEG 0x80000000 -#define P2SEG 0xa0000000 -#define P3SEG 0xc0000000 -#define P4SEG 0xe0000000 - -/* Detailed P4SEG */ -#define P4SEG_STORE_QUE (P4SEG) -#define P4SEG_IC_ADDR 0xf0000000 -#define P4SEG_IC_DATA 0xf1000000 -#define P4SEG_ITLB_ADDR 0xf2000000 -#define P4SEG_ITLB_DATA 0xf3000000 -#define P4SEG_OC_ADDR 0xf4000000 -#define P4SEG_OC_DATA 0xf5000000 -#define P4SEG_TLB_ADDR 0xf6000000 -#define P4SEG_TLB_DATA 0xf7000000 -#define P4SEG_REG_BASE 0xff000000 - -#define PA_AREA5_IO 0xb4000000 /* Area 5 IO Memory */ -#define PA_AREA6_IO 0xb8000000 /* Area 6 IO Memory */ - -#endif /* __ASM_CPU_SH4_ADDRSPACE_H */ - diff --git a/include/asm-sh/cpu-sh4/cache.h b/include/asm-sh/cpu-sh4/cache.h deleted file mode 100644 index 1c61ebf5c8e..00000000000 --- a/include/asm-sh/cpu-sh4/cache.h +++ /dev/null @@ -1,42 +0,0 @@ -/* - * include/asm-sh/cpu-sh4/cache.h - * - * Copyright (C) 1999 Niibe Yutaka - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ -#ifndef __ASM_CPU_SH4_CACHE_H -#define __ASM_CPU_SH4_CACHE_H - -#define L1_CACHE_SHIFT 5 - -#define SH_CACHE_VALID 1 -#define SH_CACHE_UPDATED 2 -#define SH_CACHE_COMBINED 4 -#define SH_CACHE_ASSOC 8 - -#define CCR 0xff00001c /* Address of Cache Control Register */ -#define CCR_CACHE_OCE 0x0001 /* Operand Cache Enable */ -#define CCR_CACHE_WT 0x0002 /* Write-Through (for P0,U0,P3) (else writeback)*/ -#define CCR_CACHE_CB 0x0004 /* Copy-Back (for P1) (else writethrough) */ -#define CCR_CACHE_OCI 0x0008 /* OC Invalidate */ -#define CCR_CACHE_ORA 0x0020 /* OC RAM Mode */ -#define CCR_CACHE_OIX 0x0080 /* OC Index Enable */ -#define CCR_CACHE_ICE 0x0100 /* Instruction Cache Enable */ -#define CCR_CACHE_ICI 0x0800 /* IC Invalidate */ -#define CCR_CACHE_IIX 0x8000 /* IC Index Enable */ -#ifndef CONFIG_CPU_SH4A -#define CCR_CACHE_EMODE 0x80000000 /* EMODE Enable */ -#endif - -/* Default CCR setup: 8k+16k-byte cache,P1-wb,enable */ -#define CCR_CACHE_ENABLE (CCR_CACHE_OCE|CCR_CACHE_ICE) -#define CCR_CACHE_INVALIDATE (CCR_CACHE_OCI|CCR_CACHE_ICI) - -#define CACHE_IC_ADDRESS_ARRAY 0xf0000000 -#define CACHE_OC_ADDRESS_ARRAY 0xf4000000 - -#endif /* __ASM_CPU_SH4_CACHE_H */ - diff --git a/include/asm-sh/cpu-sh4/cacheflush.h b/include/asm-sh/cpu-sh4/cacheflush.h deleted file mode 100644 index 065306d376e..00000000000 --- a/include/asm-sh/cpu-sh4/cacheflush.h +++ /dev/null @@ -1,43 +0,0 @@ -/* - * include/asm-sh/cpu-sh4/cacheflush.h - * - * Copyright (C) 1999 Niibe Yutaka - * Copyright (C) 2003 Paul Mundt - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ -#ifndef __ASM_CPU_SH4_CACHEFLUSH_H -#define __ASM_CPU_SH4_CACHEFLUSH_H - -/* - * Caches are broken on SH-4 (unless we use write-through - * caching; in which case they're only semi-broken), - * so we need them. - */ -void flush_cache_all(void); -void flush_dcache_all(void); -void flush_cache_mm(struct mm_struct *mm); -#define flush_cache_dup_mm(mm) flush_cache_mm(mm) -void flush_cache_range(struct vm_area_struct *vma, unsigned long start, - unsigned long end); -void flush_cache_page(struct vm_area_struct *vma, unsigned long addr, - unsigned long pfn); -void flush_dcache_page(struct page *pg); - -#define flush_dcache_mmap_lock(mapping) do { } while (0) -#define flush_dcache_mmap_unlock(mapping) do { } while (0) - -void flush_icache_range(unsigned long start, unsigned long end); -void flush_icache_user_range(struct vm_area_struct *vma, struct page *page, - unsigned long addr, int len); - -#define flush_icache_page(vma,pg) do { } while (0) - -/* Initialization of P3 area for copy_user_page */ -void p3_cache_init(void); - -#define PG_mapped PG_arch_1 - -#endif /* __ASM_CPU_SH4_CACHEFLUSH_H */ diff --git a/include/asm-sh/cpu-sh4/dma-sh7780.h b/include/asm-sh/cpu-sh4/dma-sh7780.h deleted file mode 100644 index 71b426a6e48..00000000000 --- a/include/asm-sh/cpu-sh4/dma-sh7780.h +++ /dev/null @@ -1,39 +0,0 @@ -#ifndef __ASM_SH_CPU_SH4_DMA_SH7780_H -#define __ASM_SH_CPU_SH4_DMA_SH7780_H - -#define REQ_HE 0x000000C0 -#define REQ_H 0x00000080 -#define REQ_LE 0x00000040 -#define TM_BURST 0x0000020 -#define TS_8 0x00000000 -#define TS_16 0x00000008 -#define TS_32 0x00000010 -#define TS_16BLK 0x00000018 -#define TS_32BLK 0x00100000 - -/* - * The SuperH DMAC supports a number of transmit sizes, we list them here, - * with their respective values as they appear in the CHCR registers. - * - * Defaults to a 64-bit transfer size. - */ -enum { - XMIT_SZ_8BIT, - XMIT_SZ_16BIT, - XMIT_SZ_32BIT, - XMIT_SZ_128BIT, - XMIT_SZ_256BIT, -}; - -/* - * The DMA count is defined as the number of bytes to transfer. - */ -static unsigned int ts_shift[] __maybe_unused = { - [XMIT_SZ_8BIT] = 0, - [XMIT_SZ_16BIT] = 1, - [XMIT_SZ_32BIT] = 2, - [XMIT_SZ_128BIT] = 4, - [XMIT_SZ_256BIT] = 5, -}; - -#endif /* __ASM_SH_CPU_SH4_DMA_SH7780_H */ diff --git a/include/asm-sh/cpu-sh4/dma.h b/include/asm-sh/cpu-sh4/dma.h deleted file mode 100644 index aaf71b018c2..00000000000 --- a/include/asm-sh/cpu-sh4/dma.h +++ /dev/null @@ -1,65 +0,0 @@ -#ifndef __ASM_CPU_SH4_DMA_H -#define __ASM_CPU_SH4_DMA_H - -#define DMAOR_INIT ( 0x8000 | DMAOR_DME ) - -/* SH7751/7760/7780 DMA IRQ sources */ -#define DMTE0_IRQ 34 -#define DMTE1_IRQ 35 -#define DMTE2_IRQ 36 -#define DMTE3_IRQ 37 -#define DMTE4_IRQ 44 -#define DMTE5_IRQ 45 -#define DMTE6_IRQ 46 -#define DMTE7_IRQ 47 -#define DMAE_IRQ 38 - -#ifdef CONFIG_CPU_SH4A -#define SH_DMAC_BASE 0xfc808020 - -#define CHCR_TS_MASK 0x18 -#define CHCR_TS_SHIFT 3 - -#include -#else -#define SH_DMAC_BASE 0xffa00000 - -/* Definitions for the SuperH DMAC */ -#define TM_BURST 0x0000080 -#define TS_8 0x00000010 -#define TS_16 0x00000020 -#define TS_32 0x00000030 -#define TS_64 0x00000000 - -#define CHCR_TS_MASK 0x70 -#define CHCR_TS_SHIFT 4 - -#define DMAOR_COD 0x00000008 - -/* - * The SuperH DMAC supports a number of transmit sizes, we list them here, - * with their respective values as they appear in the CHCR registers. - * - * Defaults to a 64-bit transfer size. - */ -enum { - XMIT_SZ_64BIT, - XMIT_SZ_8BIT, - XMIT_SZ_16BIT, - XMIT_SZ_32BIT, - XMIT_SZ_256BIT, -}; - -/* - * The DMA count is defined as the number of bytes to transfer. - */ -static unsigned int ts_shift[] __maybe_unused = { - [XMIT_SZ_64BIT] = 3, - [XMIT_SZ_8BIT] = 0, - [XMIT_SZ_16BIT] = 1, - [XMIT_SZ_32BIT] = 2, - [XMIT_SZ_256BIT] = 5, -}; -#endif - -#endif /* __ASM_CPU_SH4_DMA_H */ diff --git a/include/asm-sh/cpu-sh4/fpu.h b/include/asm-sh/cpu-sh4/fpu.h deleted file mode 100644 index febef734252..00000000000 --- a/include/asm-sh/cpu-sh4/fpu.h +++ /dev/null @@ -1,32 +0,0 @@ -/* - * linux/arch/sh/kernel/cpu/sh4/sh4_fpu.h - * - * Copyright (C) 2006 STMicroelectronics Limited - * Author: Carl Shaw - * - * May be copied or modified under the terms of the GNU General Public - * License Version 2. See linux/COPYING for more information. - * - * Definitions for SH4 FPU operations - */ - -#ifndef __CPU_SH4_FPU_H -#define __CPU_SH4_FPU_H - -#define FPSCR_ENABLE_MASK 0x00000f80UL - -#define FPSCR_FMOV_DOUBLE (1<<1) - -#define FPSCR_CAUSE_INEXACT (1<<12) -#define FPSCR_CAUSE_UNDERFLOW (1<<13) -#define FPSCR_CAUSE_OVERFLOW (1<<14) -#define FPSCR_CAUSE_DIVZERO (1<<15) -#define FPSCR_CAUSE_INVALID (1<<16) -#define FPSCR_CAUSE_ERROR (1<<17) - -#define FPSCR_DBL_PRECISION (1<<19) -#define FPSCR_ROUNDING_MODE(x) ((x >> 20) & 3) -#define FPSCR_RM_NEAREST (0) -#define FPSCR_RM_ZERO (1) - -#endif diff --git a/include/asm-sh/cpu-sh4/freq.h b/include/asm-sh/cpu-sh4/freq.h deleted file mode 100644 index c23af81c2e7..00000000000 --- a/include/asm-sh/cpu-sh4/freq.h +++ /dev/null @@ -1,44 +0,0 @@ -/* - * include/asm-sh/cpu-sh4/freq.h - * - * Copyright (C) 2002, 2003 Paul Mundt - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ -#ifndef __ASM_CPU_SH4_FREQ_H -#define __ASM_CPU_SH4_FREQ_H - -#if defined(CONFIG_CPU_SUBTYPE_SH7722) || \ - defined(CONFIG_CPU_SUBTYPE_SH7723) || \ - defined(CONFIG_CPU_SUBTYPE_SH7343) || \ - defined(CONFIG_CPU_SUBTYPE_SH7366) -#define FRQCR 0xa4150000 -#define VCLKCR 0xa4150004 -#define SCLKACR 0xa4150008 -#define SCLKBCR 0xa415000c -#define IrDACLKCR 0xa4150010 -#define MSTPCR0 0xa4150030 -#define MSTPCR1 0xa4150034 -#define MSTPCR2 0xa4150038 -#elif defined(CONFIG_CPU_SUBTYPE_SH7763) || \ - defined(CONFIG_CPU_SUBTYPE_SH7780) -#define FRQCR 0xffc80000 -#elif defined(CONFIG_CPU_SUBTYPE_SH7785) -#define FRQCR0 0xffc80000 -#define FRQCR1 0xffc80004 -#define FRQMR1 0xffc80014 -#elif defined(CONFIG_CPU_SUBTYPE_SHX3) -#define FRQCR 0xffc00014 -#else -#define FRQCR 0xffc00000 -#define FRQCR_PSTBY 0x0200 -#define FRQCR_PLLEN 0x0400 -#define FRQCR_CKOEN 0x0800 -#endif -#define MIN_DIVISOR_NR 0 -#define MAX_DIVISOR_NR 3 - -#endif /* __ASM_CPU_SH4_FREQ_H */ - diff --git a/include/asm-sh/cpu-sh4/mmu_context.h b/include/asm-sh/cpu-sh4/mmu_context.h deleted file mode 100644 index 9ea8eb27b18..00000000000 --- a/include/asm-sh/cpu-sh4/mmu_context.h +++ /dev/null @@ -1,63 +0,0 @@ -/* - * include/asm-sh/cpu-sh4/mmu_context.h - * - * Copyright (C) 1999 Niibe Yutaka - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ -#ifndef __ASM_CPU_SH4_MMU_CONTEXT_H -#define __ASM_CPU_SH4_MMU_CONTEXT_H - -#define MMU_PTEH 0xFF000000 /* Page table entry register HIGH */ -#define MMU_PTEL 0xFF000004 /* Page table entry register LOW */ -#define MMU_TTB 0xFF000008 /* Translation table base register */ -#define MMU_TEA 0xFF00000C /* TLB Exception Address */ -#define MMU_PTEA 0xFF000034 /* Page table entry assistance register */ - -#define MMUCR 0xFF000010 /* MMU Control Register */ - -#define MMU_ITLB_ADDRESS_ARRAY 0xF2000000 -#define MMU_UTLB_ADDRESS_ARRAY 0xF6000000 -#define MMU_PAGE_ASSOC_BIT 0x80 - -#define MMUCR_TI (1<<2) - -#ifdef CONFIG_X2TLB -#define MMUCR_ME (1 << 7) -#else -#define MMUCR_ME (0) -#endif - -#if defined(CONFIG_32BIT) && defined(CONFIG_CPU_SUBTYPE_ST40) -#define MMUCR_SE (1 << 4) -#else -#define MMUCR_SE (0) -#endif - -#ifdef CONFIG_SH_STORE_QUEUES -#define MMUCR_SQMD (1 << 9) -#else -#define MMUCR_SQMD (0) -#endif - -#define MMU_NTLB_ENTRIES 64 -#define MMU_CONTROL_INIT (0x05|MMUCR_SQMD|MMUCR_ME|MMUCR_SE) - -#define MMU_ITLB_DATA_ARRAY 0xF3000000 -#define MMU_UTLB_DATA_ARRAY 0xF7000000 - -#define MMU_UTLB_ENTRIES 64 -#define MMU_U_ENTRY_SHIFT 8 -#define MMU_UTLB_VALID 0x100 -#define MMU_ITLB_ENTRIES 4 -#define MMU_I_ENTRY_SHIFT 8 -#define MMU_ITLB_VALID 0x100 - -#define TRA 0xff000020 -#define EXPEVT 0xff000024 -#define INTEVT 0xff000028 - -#endif /* __ASM_CPU_SH4_MMU_CONTEXT_H */ - diff --git a/include/asm-sh/cpu-sh4/rtc.h b/include/asm-sh/cpu-sh4/rtc.h deleted file mode 100644 index 25b1e6adfe8..00000000000 --- a/include/asm-sh/cpu-sh4/rtc.h +++ /dev/null @@ -1,13 +0,0 @@ -#ifndef __ASM_SH_CPU_SH4_RTC_H -#define __ASM_SH_CPU_SH4_RTC_H - -#ifdef CONFIG_CPU_SUBTYPE_SH7723 -#define rtc_reg_size sizeof(u16) -#else -#define rtc_reg_size sizeof(u32) -#endif - -#define RTC_BIT_INVERTED 0x40 /* bug on SH7750, SH7750S */ -#define RTC_DEF_CAPABILITIES RTC_CAP_4_DIGIT_YEAR - -#endif /* __ASM_SH_CPU_SH4_RTC_H */ diff --git a/include/asm-sh/cpu-sh4/sigcontext.h b/include/asm-sh/cpu-sh4/sigcontext.h deleted file mode 100644 index ab392f120e0..00000000000 --- a/include/asm-sh/cpu-sh4/sigcontext.h +++ /dev/null @@ -1,24 +0,0 @@ -#ifndef __ASM_CPU_SH4_SIGCONTEXT_H -#define __ASM_CPU_SH4_SIGCONTEXT_H - -struct sigcontext { - unsigned long oldmask; - - /* CPU registers */ - unsigned long sc_regs[16]; - unsigned long sc_pc; - unsigned long sc_pr; - unsigned long sc_sr; - unsigned long sc_gbr; - unsigned long sc_mach; - unsigned long sc_macl; - - /* FPU registers */ - unsigned long sc_fpregs[16]; - unsigned long sc_xfpregs[16]; - unsigned int sc_fpscr; - unsigned int sc_fpul; - unsigned int sc_ownedfp; -}; - -#endif /* __ASM_CPU_SH4_SIGCONTEXT_H */ diff --git a/include/asm-sh/cpu-sh4/sq.h b/include/asm-sh/cpu-sh4/sq.h deleted file mode 100644 index 586d6491816..00000000000 --- a/include/asm-sh/cpu-sh4/sq.h +++ /dev/null @@ -1,35 +0,0 @@ -/* - * include/asm-sh/cpu-sh4/sq.h - * - * Copyright (C) 2001, 2002, 2003 Paul Mundt - * Copyright (C) 2001, 2002 M. R. Brown - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ -#ifndef __ASM_CPU_SH4_SQ_H -#define __ASM_CPU_SH4_SQ_H - -#include - -/* - * Store queues range from e0000000-e3fffffc, allowing approx. 64MB to be - * mapped to any physical address space. Since data is written (and aligned) - * to 32-byte boundaries, we need to be sure that all allocations are aligned. - */ -#define SQ_SIZE 32 -#define SQ_ALIGN_MASK (~(SQ_SIZE - 1)) -#define SQ_ALIGN(addr) (((addr)+SQ_SIZE-1) & SQ_ALIGN_MASK) - -#define SQ_QACR0 (P4SEG_REG_BASE + 0x38) -#define SQ_QACR1 (P4SEG_REG_BASE + 0x3c) -#define SQ_ADDRMAX (P4SEG_STORE_QUE + 0x04000000) - -/* arch/sh/kernel/cpu/sh4/sq.c */ -unsigned long sq_remap(unsigned long phys, unsigned int size, - const char *name, unsigned long flags); -void sq_unmap(unsigned long vaddr); -void sq_flush_range(unsigned long start, unsigned int len); - -#endif /* __ASM_CPU_SH4_SQ_H */ diff --git a/include/asm-sh/cpu-sh4/timer.h b/include/asm-sh/cpu-sh4/timer.h deleted file mode 100644 index d1e796b9688..00000000000 --- a/include/asm-sh/cpu-sh4/timer.h +++ /dev/null @@ -1,60 +0,0 @@ -/* - * include/asm-sh/cpu-sh4/timer.h - * - * Copyright (C) 2004 Lineo Solutions, Inc. - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ -#ifndef __ASM_CPU_SH4_TIMER_H -#define __ASM_CPU_SH4_TIMER_H - -/* - * --------------------------------------------------------------------------- - * TMU Common definitions for SH4 processors - * SH7750S/SH7750R - * SH7751/SH7751R - * SH7760 - * SH-X3 - * --------------------------------------------------------------------------- - */ -#ifdef CONFIG_CPU_SUBTYPE_SHX3 -#define TMU_012_BASE 0xffc10000 -#define TMU_345_BASE 0xffc20000 -#else -#define TMU_012_BASE 0xffd80000 -#define TMU_345_BASE 0xfe100000 -#endif - -#define TMU_TOCR TMU_012_BASE /* Not supported on all CPUs */ - -#define TMU_012_TSTR (TMU_012_BASE + 0x04) -#define TMU_345_TSTR (TMU_345_BASE + 0x04) - -#define TMU0_TCOR (TMU_012_BASE + 0x08) -#define TMU0_TCNT (TMU_012_BASE + 0x0c) -#define TMU0_TCR (TMU_012_BASE + 0x10) - -#define TMU1_TCOR (TMU_012_BASE + 0x14) -#define TMU1_TCNT (TMU_012_BASE + 0x18) -#define TMU1_TCR (TMU_012_BASE + 0x1c) - -#define TMU2_TCOR (TMU_012_BASE + 0x20) -#define TMU2_TCNT (TMU_012_BASE + 0x24) -#define TMU2_TCR (TMU_012_BASE + 0x28) -#define TMU2_TCPR (TMU_012_BASE + 0x2c) - -#define TMU3_TCOR (TMU_345_BASE + 0x08) -#define TMU3_TCNT (TMU_345_BASE + 0x0c) -#define TMU3_TCR (TMU_345_BASE + 0x10) - -#define TMU4_TCOR (TMU_345_BASE + 0x14) -#define TMU4_TCNT (TMU_345_BASE + 0x18) -#define TMU4_TCR (TMU_345_BASE + 0x1c) - -#define TMU5_TCOR (TMU_345_BASE + 0x20) -#define TMU5_TCNT (TMU_345_BASE + 0x24) -#define TMU5_TCR (TMU_345_BASE + 0x28) - -#endif /* __ASM_CPU_SH4_TIMER_H */ diff --git a/include/asm-sh/cpu-sh4/ubc.h b/include/asm-sh/cpu-sh4/ubc.h deleted file mode 100644 index c86e1705093..00000000000 --- a/include/asm-sh/cpu-sh4/ubc.h +++ /dev/null @@ -1,64 +0,0 @@ -/* - * include/asm-sh/cpu-sh4/ubc.h - * - * Copyright (C) 1999 Niibe Yutaka - * Copyright (C) 2003 Paul Mundt - * Copyright (C) 2006 Lineo Solutions Inc. support SH4A UBC - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ -#ifndef __ASM_CPU_SH4_UBC_H -#define __ASM_CPU_SH4_UBC_H - -#if defined(CONFIG_CPU_SH4A) -#define UBC_CBR0 0xff200000 -#define UBC_CRR0 0xff200004 -#define UBC_CAR0 0xff200008 -#define UBC_CAMR0 0xff20000c -#define UBC_CBR1 0xff200020 -#define UBC_CRR1 0xff200024 -#define UBC_CAR1 0xff200028 -#define UBC_CAMR1 0xff20002c -#define UBC_CDR1 0xff200030 -#define UBC_CDMR1 0xff200034 -#define UBC_CETR1 0xff200038 -#define UBC_CCMFR 0xff200600 -#define UBC_CBCR 0xff200620 - -/* CBR */ -#define UBC_CBR_AIE (0x01<<30) -#define UBC_CBR_ID_INST (0x01<<4) -#define UBC_CBR_RW_READ (0x01<<1) -#define UBC_CBR_CE (0x01) - -#define UBC_CBR_AIV_MASK (0x00FF0000) -#define UBC_CBR_AIV_SHIFT (16) -#define UBC_CBR_AIV_SET(asid) (((asid)<| - * +-----------------------------+-----------------+------+----------+------+ - * | | | ways |set index |offset| - * +-----------------------------+-----------------+------+----------+------+ - * ^ 2 bits 8 bits 5 bits - * +- Bit 31 - * - * Cacheline size is based on offset: 5 bits = 32 bytes per line - * A cache line is identified by a tag + set but OCACHETAG/ICACHETAG - * have a broader space for registers. These are outlined by - * CACHE_?C_*_STEP below. - * - */ - -/* Instruction cache */ -#define CACHE_IC_ADDRESS_ARRAY 0x01000000 - -/* Operand Cache */ -#define CACHE_OC_ADDRESS_ARRAY 0x01800000 - -/* These declarations relate to cache 'synonyms' in the operand cache. A - 'synonym' occurs where effective address bits overlap between those used for - indexing the cache sets and those passed to the MMU for translation. In the - case of SH5-101 & SH5-103, only bit 12 is affected for 4k pages. */ - -#define CACHE_OC_N_SYNBITS 1 /* Number of synonym bits */ -#define CACHE_OC_SYN_SHIFT 12 -/* Mask to select synonym bit(s) */ -#define CACHE_OC_SYN_MASK (((1UL<). -** Assigns symbolic names to control & target registers. -*/ - -/* - * Define some useful aliases for control registers. - */ -#define SR cr0 -#define SSR cr1 -#define PSSR cr2 - /* cr3 UNDEFINED */ -#define INTEVT cr4 -#define EXPEVT cr5 -#define PEXPEVT cr6 -#define TRA cr7 -#define SPC cr8 -#define PSPC cr9 -#define RESVEC cr10 -#define VBR cr11 - /* cr12 UNDEFINED */ -#define TEA cr13 - /* cr14-cr15 UNDEFINED */ -#define DCR cr16 -#define KCR0 cr17 -#define KCR1 cr18 - /* cr19-cr31 UNDEFINED */ - /* cr32-cr61 RESERVED */ -#define CTC cr62 -#define USR cr63 - -/* - * ABI dependent registers (general purpose set) - */ -#define RET r2 -#define ARG1 r2 -#define ARG2 r3 -#define ARG3 r4 -#define ARG4 r5 -#define ARG5 r6 -#define ARG6 r7 -#define SP r15 -#define LINK r18 -#define ZERO r63 - -/* - * Status register defines: used only by assembly sources (and - * syntax independednt) - */ -#define SR_RESET_VAL 0x0000000050008000 -#define SR_HARMLESS 0x00000000500080f0 /* Write ignores for most */ -#define SR_ENABLE_FPU 0xffffffffffff7fff /* AND with this */ - -#if defined (CONFIG_SH64_SR_WATCH) -#define SR_ENABLE_MMU 0x0000000084000000 /* OR with this */ -#else -#define SR_ENABLE_MMU 0x0000000080000000 /* OR with this */ -#endif - -#define SR_UNBLOCK_EXC 0xffffffffefffffff /* AND with this */ -#define SR_BLOCK_EXC 0x0000000010000000 /* OR with this */ - -#else /* Not __ASSEMBLY__ syntax */ - -/* -** Stringify reg. name -*/ -#define __str(x) #x - -/* Stringify control register names for use in inline assembly */ -#define __SR __str(SR) -#define __SSR __str(SSR) -#define __PSSR __str(PSSR) -#define __INTEVT __str(INTEVT) -#define __EXPEVT __str(EXPEVT) -#define __PEXPEVT __str(PEXPEVT) -#define __TRA __str(TRA) -#define __SPC __str(SPC) -#define __PSPC __str(PSPC) -#define __RESVEC __str(RESVEC) -#define __VBR __str(VBR) -#define __TEA __str(TEA) -#define __DCR __str(DCR) -#define __KCR0 __str(KCR0) -#define __KCR1 __str(KCR1) -#define __CTC __str(CTC) -#define __USR __str(USR) - -#endif /* __ASSEMBLY__ */ -#endif /* __ASM_SH_CPU_SH5_REGISTERS_H */ diff --git a/include/asm-sh/cpu-sh5/rtc.h b/include/asm-sh/cpu-sh5/rtc.h deleted file mode 100644 index 12ea0ed144e..00000000000 --- a/include/asm-sh/cpu-sh5/rtc.h +++ /dev/null @@ -1,8 +0,0 @@ -#ifndef __ASM_SH_CPU_SH5_RTC_H -#define __ASM_SH_CPU_SH5_RTC_H - -#define rtc_reg_size sizeof(u32) -#define RTC_BIT_INVERTED 0 /* The SH-5 RTC is surprisingly sane! */ -#define RTC_DEF_CAPABILITIES RTC_CAP_4_DIGIT_YEAR - -#endif /* __ASM_SH_CPU_SH5_RTC_H */ diff --git a/include/asm-sh/cpu-sh5/timer.h b/include/asm-sh/cpu-sh5/timer.h deleted file mode 100644 index 88da9b341a3..00000000000 --- a/include/asm-sh/cpu-sh5/timer.h +++ /dev/null @@ -1,4 +0,0 @@ -#ifndef __ASM_SH_CPU_SH5_TIMER_H -#define __ASM_SH_CPU_SH5_TIMER_H - -#endif /* __ASM_SH_CPU_SH5_TIMER_H */ diff --git a/include/asm-sh/cputime.h b/include/asm-sh/cputime.h deleted file mode 100644 index 6ca395d1393..00000000000 --- a/include/asm-sh/cputime.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef __SH_CPUTIME_H -#define __SH_CPUTIME_H - -#include - -#endif /* __SH_CPUTIME_H */ diff --git a/include/asm-sh/current.h b/include/asm-sh/current.h deleted file mode 100644 index 62b63880b33..00000000000 --- a/include/asm-sh/current.h +++ /dev/null @@ -1,20 +0,0 @@ -#ifndef __ASM_SH_CURRENT_H -#define __ASM_SH_CURRENT_H - -/* - * Copyright (C) 1999 Niibe Yutaka - * - */ - -#include - -struct task_struct; - -static __inline__ struct task_struct * get_current(void) -{ - return current_thread_info()->task; -} - -#define current get_current() - -#endif /* __ASM_SH_CURRENT_H */ diff --git a/include/asm-sh/delay.h b/include/asm-sh/delay.h deleted file mode 100644 index 4b16bf9b56b..00000000000 --- a/include/asm-sh/delay.h +++ /dev/null @@ -1,26 +0,0 @@ -#ifndef __ASM_SH_DELAY_H -#define __ASM_SH_DELAY_H - -/* - * Copyright (C) 1993 Linus Torvalds - * - * Delay routines calling functions in arch/sh/lib/delay.c - */ - -extern void __bad_udelay(void); -extern void __bad_ndelay(void); - -extern void __udelay(unsigned long usecs); -extern void __ndelay(unsigned long nsecs); -extern void __const_udelay(unsigned long xloops); -extern void __delay(unsigned long loops); - -#define udelay(n) (__builtin_constant_p(n) ? \ - ((n) > 20000 ? __bad_udelay() : __const_udelay((n) * 0x10c6ul)) : \ - __udelay(n)) - -#define ndelay(n) (__builtin_constant_p(n) ? \ - ((n) > 20000 ? __bad_ndelay() : __const_udelay((n) * 5ul)) : \ - __ndelay(n)) - -#endif /* __ASM_SH_DELAY_H */ diff --git a/include/asm-sh/device.h b/include/asm-sh/device.h deleted file mode 100644 index efd511d0803..00000000000 --- a/include/asm-sh/device.h +++ /dev/null @@ -1,12 +0,0 @@ -/* - * Arch specific extensions to struct device - * - * This file is released under the GPLv2 - */ -#include - -struct platform_device; -/* allocate contiguous memory chunk and fill in struct resource */ -int platform_resource_setup_memory(struct platform_device *pdev, - char *name, unsigned long memsize); - diff --git a/include/asm-sh/div64.h b/include/asm-sh/div64.h deleted file mode 100644 index 6cd978cefb2..00000000000 --- a/include/asm-sh/div64.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/include/asm-sh/dma-mapping.h b/include/asm-sh/dma-mapping.h deleted file mode 100644 index 6c0b8a2de14..00000000000 --- a/include/asm-sh/dma-mapping.h +++ /dev/null @@ -1,192 +0,0 @@ -#ifndef __ASM_SH_DMA_MAPPING_H -#define __ASM_SH_DMA_MAPPING_H - -#include -#include -#include -#include - -extern struct bus_type pci_bus_type; - -#define dma_supported(dev, mask) (1) - -static inline int dma_set_mask(struct device *dev, u64 mask) -{ - if (!dev->dma_mask || !dma_supported(dev, mask)) - return -EIO; - - *dev->dma_mask = mask; - - return 0; -} - -void *dma_alloc_coherent(struct device *dev, size_t size, - dma_addr_t *dma_handle, gfp_t flag); - -void dma_free_coherent(struct device *dev, size_t size, - void *vaddr, dma_addr_t dma_handle); - -void dma_cache_sync(struct device *dev, void *vaddr, size_t size, - enum dma_data_direction dir); - -#define dma_alloc_noncoherent(d, s, h, f) dma_alloc_coherent(d, s, h, f) -#define dma_free_noncoherent(d, s, v, h) dma_free_coherent(d, s, v, h) -#define dma_is_consistent(d, h) (1) - -static inline dma_addr_t dma_map_single(struct device *dev, - void *ptr, size_t size, - enum dma_data_direction dir) -{ -#if defined(CONFIG_PCI) && !defined(CONFIG_SH_PCIDMA_NONCOHERENT) - if (dev->bus == &pci_bus_type) - return virt_to_phys(ptr); -#endif - dma_cache_sync(dev, ptr, size, dir); - - return virt_to_phys(ptr); -} - -#define dma_unmap_single(dev, addr, size, dir) do { } while (0) - -static inline int dma_map_sg(struct device *dev, struct scatterlist *sg, - int nents, enum dma_data_direction dir) -{ - int i; - - for (i = 0; i < nents; i++) { -#if !defined(CONFIG_PCI) || defined(CONFIG_SH_PCIDMA_NONCOHERENT) - dma_cache_sync(dev, sg_virt(&sg[i]), sg[i].length, dir); -#endif - sg[i].dma_address = sg_phys(&sg[i]); - } - - return nents; -} - -#define dma_unmap_sg(dev, sg, nents, dir) do { } while (0) - -static inline dma_addr_t dma_map_page(struct device *dev, struct page *page, - unsigned long offset, size_t size, - enum dma_data_direction dir) -{ - return dma_map_single(dev, page_address(page) + offset, size, dir); -} - -static inline void dma_unmap_page(struct device *dev, dma_addr_t dma_address, - size_t size, enum dma_data_direction dir) -{ - dma_unmap_single(dev, dma_address, size, dir); -} - -static inline void dma_sync_single(struct device *dev, dma_addr_t dma_handle, - size_t size, enum dma_data_direction dir) -{ -#if defined(CONFIG_PCI) && !defined(CONFIG_SH_PCIDMA_NONCOHERENT) - if (dev->bus == &pci_bus_type) - return; -#endif - dma_cache_sync(dev, phys_to_virt(dma_handle), size, dir); -} - -static inline void dma_sync_single_range(struct device *dev, - dma_addr_t dma_handle, - unsigned long offset, size_t size, - enum dma_data_direction dir) -{ -#if defined(CONFIG_PCI) && !defined(CONFIG_SH_PCIDMA_NONCOHERENT) - if (dev->bus == &pci_bus_type) - return; -#endif - dma_cache_sync(dev, phys_to_virt(dma_handle) + offset, size, dir); -} - -static inline void dma_sync_sg(struct device *dev, struct scatterlist *sg, - int nelems, enum dma_data_direction dir) -{ - int i; - - for (i = 0; i < nelems; i++) { -#if !defined(CONFIG_PCI) || defined(CONFIG_SH_PCIDMA_NONCOHERENT) - dma_cache_sync(dev, sg_virt(&sg[i]), sg[i].length, dir); -#endif - sg[i].dma_address = sg_phys(&sg[i]); - } -} - -static inline void dma_sync_single_for_cpu(struct device *dev, - dma_addr_t dma_handle, size_t size, - enum dma_data_direction dir) -{ - dma_sync_single(dev, dma_handle, size, dir); -} - -static inline void dma_sync_single_for_device(struct device *dev, - dma_addr_t dma_handle, - size_t size, - enum dma_data_direction dir) -{ - dma_sync_single(dev, dma_handle, size, dir); -} - -static inline void dma_sync_single_range_for_cpu(struct device *dev, - dma_addr_t dma_handle, - unsigned long offset, - size_t size, - enum dma_data_direction direction) -{ - dma_sync_single_for_cpu(dev, dma_handle+offset, size, direction); -} - -static inline void dma_sync_single_range_for_device(struct device *dev, - dma_addr_t dma_handle, - unsigned long offset, - size_t size, - enum dma_data_direction direction) -{ - dma_sync_single_for_device(dev, dma_handle+offset, size, direction); -} - - -static inline void dma_sync_sg_for_cpu(struct device *dev, - struct scatterlist *sg, int nelems, - enum dma_data_direction dir) -{ - dma_sync_sg(dev, sg, nelems, dir); -} - -static inline void dma_sync_sg_for_device(struct device *dev, - struct scatterlist *sg, int nelems, - enum dma_data_direction dir) -{ - dma_sync_sg(dev, sg, nelems, dir); -} - - -static inline int dma_get_cache_alignment(void) -{ - /* - * Each processor family will define its own L1_CACHE_SHIFT, - * L1_CACHE_BYTES wraps to this, so this is always safe. - */ - return L1_CACHE_BYTES; -} - -static inline int dma_mapping_error(struct device *dev, dma_addr_t dma_addr) -{ - return dma_addr == 0; -} - -#define ARCH_HAS_DMA_DECLARE_COHERENT_MEMORY - -extern int -dma_declare_coherent_memory(struct device *dev, dma_addr_t bus_addr, - dma_addr_t device_addr, size_t size, int flags); - -extern void -dma_release_declared_memory(struct device *dev); - -extern void * -dma_mark_declared_memory_occupied(struct device *dev, - dma_addr_t device_addr, size_t size); - -#endif /* __ASM_SH_DMA_MAPPING_H */ diff --git a/include/asm-sh/dma.h b/include/asm-sh/dma.h deleted file mode 100644 index a65b02fd186..00000000000 --- a/include/asm-sh/dma.h +++ /dev/null @@ -1,166 +0,0 @@ -/* - * include/asm-sh/dma.h - * - * Copyright (C) 2003, 2004 Paul Mundt - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ -#ifndef __ASM_SH_DMA_H -#define __ASM_SH_DMA_H -#ifdef __KERNEL__ - -#include -#include -#include -#include -#include - -/* The maximum address that we can perform a DMA transfer to on this platform */ -/* Don't define MAX_DMA_ADDRESS; it's useless on the SuperH and any - occurrence should be flagged as an error. */ -/* But... */ -/* XXX: This is not applicable to SuperH, just needed for alloc_bootmem */ -#define MAX_DMA_ADDRESS (PAGE_OFFSET+0x10000000) - -#ifdef CONFIG_NR_DMA_CHANNELS -# define MAX_DMA_CHANNELS (CONFIG_NR_DMA_CHANNELS) -#else -# define MAX_DMA_CHANNELS (CONFIG_NR_ONCHIP_DMA_CHANNELS) -#endif - -/* - * Read and write modes can mean drastically different things depending on the - * channel configuration. Consult your DMAC documentation and module - * implementation for further clues. - */ -#define DMA_MODE_READ 0x00 -#define DMA_MODE_WRITE 0x01 -#define DMA_MODE_MASK 0x01 - -#define DMA_AUTOINIT 0x10 - -/* - * DMAC (dma_info) flags - */ -enum { - DMAC_CHANNELS_CONFIGURED = 0x01, - DMAC_CHANNELS_TEI_CAPABLE = 0x02, /* Transfer end interrupt */ -}; - -/* - * DMA channel capabilities / flags - */ -enum { - DMA_CONFIGURED = 0x01, - - /* - * Transfer end interrupt, inherited from DMAC. - * wait_queue used in dma_wait_for_completion. - */ - DMA_TEI_CAPABLE = 0x02, -}; - -extern spinlock_t dma_spin_lock; - -struct dma_channel; - -struct dma_ops { - int (*request)(struct dma_channel *chan); - void (*free)(struct dma_channel *chan); - - int (*get_residue)(struct dma_channel *chan); - int (*xfer)(struct dma_channel *chan); - int (*configure)(struct dma_channel *chan, unsigned long flags); - int (*extend)(struct dma_channel *chan, unsigned long op, void *param); -}; - -struct dma_channel { - char dev_id[16]; /* unique name per DMAC of channel */ - - unsigned int chan; /* DMAC channel number */ - unsigned int vchan; /* Virtual channel number */ - - unsigned int mode; - unsigned int count; - - unsigned long sar; - unsigned long dar; - - const char **caps; - - unsigned long flags; - atomic_t busy; - - wait_queue_head_t wait_queue; - - struct sys_device dev; - void *priv_data; -}; - -struct dma_info { - struct platform_device *pdev; - - const char *name; - unsigned int nr_channels; - unsigned long flags; - - struct dma_ops *ops; - struct dma_channel *channels; - - struct list_head list; - int first_channel_nr; - int first_vchannel_nr; -}; - -struct dma_chan_caps { - int ch_num; - const char **caplist; -}; - -#define to_dma_channel(channel) container_of(channel, struct dma_channel, dev) - -/* arch/sh/drivers/dma/dma-api.c */ -extern int dma_xfer(unsigned int chan, unsigned long from, - unsigned long to, size_t size, unsigned int mode); - -#define dma_write(chan, from, to, size) \ - dma_xfer(chan, from, to, size, DMA_MODE_WRITE) -#define dma_write_page(chan, from, to) \ - dma_write(chan, from, to, PAGE_SIZE) - -#define dma_read(chan, from, to, size) \ - dma_xfer(chan, from, to, size, DMA_MODE_READ) -#define dma_read_page(chan, from, to) \ - dma_read(chan, from, to, PAGE_SIZE) - -extern int request_dma_bycap(const char **dmac, const char **caps, - const char *dev_id); -extern int request_dma(unsigned int chan, const char *dev_id); -extern void free_dma(unsigned int chan); -extern int get_dma_residue(unsigned int chan); -extern struct dma_info *get_dma_info(unsigned int chan); -extern struct dma_channel *get_dma_channel(unsigned int chan); -extern void dma_wait_for_completion(unsigned int chan); -extern void dma_configure_channel(unsigned int chan, unsigned long flags); - -extern int register_dmac(struct dma_info *info); -extern void unregister_dmac(struct dma_info *info); -extern struct dma_info *get_dma_info_by_name(const char *dmac_name); - -extern int dma_extend(unsigned int chan, unsigned long op, void *param); -extern int register_chan_caps(const char *dmac, struct dma_chan_caps *capslist); - -/* arch/sh/drivers/dma/dma-sysfs.c */ -extern int dma_create_sysfs_files(struct dma_channel *, struct dma_info *); -extern void dma_remove_sysfs_files(struct dma_channel *, struct dma_info *); - -#ifdef CONFIG_PCI -extern int isa_dma_bridge_buggy; -#else -#define isa_dma_bridge_buggy (0) -#endif - -#endif /* __KERNEL__ */ -#endif /* __ASM_SH_DMA_H */ diff --git a/include/asm-sh/dmabrg.h b/include/asm-sh/dmabrg.h deleted file mode 100644 index c5edba216cf..00000000000 --- a/include/asm-sh/dmabrg.h +++ /dev/null @@ -1,23 +0,0 @@ -/* - * SH7760 DMABRG (USB/Audio) support - */ - -#ifndef _DMABRG_H_ -#define _DMABRG_H_ - -/* IRQ sources */ -#define DMABRGIRQ_USBDMA 0 -#define DMABRGIRQ_USBDMAERR 1 -#define DMABRGIRQ_A0TXF 2 -#define DMABRGIRQ_A0TXH 3 -#define DMABRGIRQ_A0RXF 4 -#define DMABRGIRQ_A0RXH 5 -#define DMABRGIRQ_A1TXF 6 -#define DMABRGIRQ_A1TXH 7 -#define DMABRGIRQ_A1RXF 8 -#define DMABRGIRQ_A1RXH 9 - -extern int dmabrg_request_irq(unsigned int, void(*)(void *), void *); -extern void dmabrg_free_irq(unsigned int); - -#endif diff --git a/include/asm-sh/dreamcast/dma.h b/include/asm-sh/dreamcast/dma.h deleted file mode 100644 index ddd68e78870..00000000000 --- a/include/asm-sh/dreamcast/dma.h +++ /dev/null @@ -1,34 +0,0 @@ -/* - * include/asm-sh/dreamcast/dma.h - * - * Copyright (C) 2003 Paul Mundt - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ -#ifndef __ASM_SH_DREAMCAST_DMA_H -#define __ASM_SH_DREAMCAST_DMA_H - -/* Number of DMA channels */ -#define ONCHIP_NR_DMA_CHANNELS 4 -#define G2_NR_DMA_CHANNELS 4 -#define PVR2_NR_DMA_CHANNELS 1 - -/* Channels for cascading */ -#define PVR2_CASCADE_CHAN 2 -#define G2_CASCADE_CHAN 3 - -/* PVR2 DMA Registers */ -#define PVR2_DMA_BASE 0xa05f6800 -#define PVR2_DMA_ADDR (PVR2_DMA_BASE + 0) -#define PVR2_DMA_COUNT (PVR2_DMA_BASE + 4) -#define PVR2_DMA_MODE (PVR2_DMA_BASE + 8) -#define PVR2_DMA_LMMODE0 (PVR2_DMA_BASE + 132) -#define PVR2_DMA_LMMODE1 (PVR2_DMA_BASE + 136) - -/* G2 DMA Register */ -#define G2_DMA_BASE 0xa05f7800 - -#endif /* __ASM_SH_DREAMCAST_DMA_H */ - diff --git a/include/asm-sh/dreamcast/maple.h b/include/asm-sh/dreamcast/maple.h deleted file mode 100644 index 51f6a87f1f1..00000000000 --- a/include/asm-sh/dreamcast/maple.h +++ /dev/null @@ -1,37 +0,0 @@ -#ifndef __ASM_MAPLE_H -#define __ASM_MAPLE_H - -#define MAPLE_PORTS 4 -#define MAPLE_PNP_INTERVAL HZ -#define MAPLE_MAXPACKETS 8 -#define MAPLE_DMA_ORDER 14 -#define MAPLE_DMA_SIZE (1 << MAPLE_DMA_ORDER) -#define MAPLE_DMA_PAGES ((MAPLE_DMA_ORDER > PAGE_SHIFT) ? \ - MAPLE_DMA_ORDER - PAGE_SHIFT : 0) - -/* Maple Bus registers */ -#define MAPLE_BASE 0xa05f6c00 -#define MAPLE_DMAADDR (MAPLE_BASE+0x04) -#define MAPLE_TRIGTYPE (MAPLE_BASE+0x10) -#define MAPLE_ENABLE (MAPLE_BASE+0x14) -#define MAPLE_STATE (MAPLE_BASE+0x18) -#define MAPLE_SPEED (MAPLE_BASE+0x80) -#define MAPLE_RESET (MAPLE_BASE+0x8c) - -#define MAPLE_MAGIC 0x6155404f -#define MAPLE_2MBPS 0 -#define MAPLE_TIMEOUT(n) ((n)<<15) - -/* Function codes */ -#define MAPLE_FUNC_CONTROLLER 0x001 -#define MAPLE_FUNC_MEMCARD 0x002 -#define MAPLE_FUNC_LCD 0x004 -#define MAPLE_FUNC_CLOCK 0x008 -#define MAPLE_FUNC_MICROPHONE 0x010 -#define MAPLE_FUNC_ARGUN 0x020 -#define MAPLE_FUNC_KEYBOARD 0x040 -#define MAPLE_FUNC_LIGHTGUN 0x080 -#define MAPLE_FUNC_PURUPURU 0x100 -#define MAPLE_FUNC_MOUSE 0x200 - -#endif /* __ASM_MAPLE_H */ diff --git a/include/asm-sh/dreamcast/pci.h b/include/asm-sh/dreamcast/pci.h deleted file mode 100644 index e401b24b0d8..00000000000 --- a/include/asm-sh/dreamcast/pci.h +++ /dev/null @@ -1,25 +0,0 @@ -/* - * include/asm-sh/dreamcast/pci.h - * - * Copyright (C) 2001, 2002 M. R. Brown - * Copyright (C) 2002, 2003 Paul Mundt - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ -#ifndef __ASM_SH_DREAMCAST_PCI_H -#define __ASM_SH_DREAMCAST_PCI_H - -#include - -#define GAPSPCI_REGS 0x01001400 -#define GAPSPCI_DMA_BASE 0x01840000 -#define GAPSPCI_DMA_SIZE 32768 -#define GAPSPCI_BBA_CONFIG 0x01001600 -#define GAPSPCI_BBA_CONFIG_SIZE 0x2000 - -#define GAPSPCI_IRQ HW_EVENT_EXTERNAL - -#endif /* __ASM_SH_DREAMCAST_PCI_H */ - diff --git a/include/asm-sh/dreamcast/sysasic.h b/include/asm-sh/dreamcast/sysasic.h deleted file mode 100644 index f33426608a8..00000000000 --- a/include/asm-sh/dreamcast/sysasic.h +++ /dev/null @@ -1,43 +0,0 @@ -/* include/asm-sh/dreamcast/sysasic.h - * - * Definitions for the Dreamcast System ASIC and related peripherals. - * - * Copyright (c) 2001 M. R. Brown - * Copyright (C) 2003 Paul Mundt - * - * This file is part of the LinuxDC project (www.linuxdc.org) - * - * Released under the terms of the GNU GPL v2.0. - * - */ -#ifndef __ASM_SH_DREAMCAST_SYSASIC_H -#define __ASM_SH_DREAMCAST_SYSASIC_H - -#include - -/* Hardware events - - - Each of these events correspond to a bit within the Event Mask Registers/ - Event Status Registers. Because of the virtual IRQ numbering scheme, a - base offset must be used when calculating the virtual IRQ that each event - takes. -*/ - -#define HW_EVENT_IRQ_BASE 48 - -/* IRQ 13 */ -#define HW_EVENT_VSYNC (HW_EVENT_IRQ_BASE + 5) /* VSync */ -#define HW_EVENT_MAPLE_DMA (HW_EVENT_IRQ_BASE + 12) /* Maple DMA complete */ -#define HW_EVENT_GDROM_DMA (HW_EVENT_IRQ_BASE + 14) /* GD-ROM DMA complete */ -#define HW_EVENT_G2_DMA (HW_EVENT_IRQ_BASE + 15) /* G2 DMA complete */ -#define HW_EVENT_PVR2_DMA (HW_EVENT_IRQ_BASE + 19) /* PVR2 DMA complete */ - -/* IRQ 11 */ -#define HW_EVENT_GDROM_CMD (HW_EVENT_IRQ_BASE + 32) /* GD-ROM cmd. complete */ -#define HW_EVENT_AICA_SYS (HW_EVENT_IRQ_BASE + 33) /* AICA-related */ -#define HW_EVENT_EXTERNAL (HW_EVENT_IRQ_BASE + 35) /* Ext. (expansion) */ - -#define HW_EVENT_IRQ_MAX (HW_EVENT_IRQ_BASE + 95) - -#endif /* __ASM_SH_DREAMCAST_SYSASIC_H */ - diff --git a/include/asm-sh/edosk7705.h b/include/asm-sh/edosk7705.h deleted file mode 100644 index 5bdc9d9be3d..00000000000 --- a/include/asm-sh/edosk7705.h +++ /dev/null @@ -1,30 +0,0 @@ -/* - * include/asm-sh/edosk7705.h - * - * Modified version of io_se.h for the EDOSK7705 specific functions. - * - * May be copied or modified under the terms of the GNU General Public - * License. See linux/COPYING for more information. - * - * IO functions for an Hitachi EDOSK7705 development board - */ - -#ifndef __ASM_SH_EDOSK7705_IO_H -#define __ASM_SH_EDOSK7705_IO_H - -#include - -extern unsigned char sh_edosk7705_inb(unsigned long port); -extern unsigned int sh_edosk7705_inl(unsigned long port); - -extern void sh_edosk7705_outb(unsigned char value, unsigned long port); -extern void sh_edosk7705_outl(unsigned int value, unsigned long port); - -extern void sh_edosk7705_insb(unsigned long port, void *addr, unsigned long count); -extern void sh_edosk7705_insl(unsigned long port, void *addr, unsigned long count); -extern void sh_edosk7705_outsb(unsigned long port, const void *addr, unsigned long count); -extern void sh_edosk7705_outsl(unsigned long port, const void *addr, unsigned long count); - -extern unsigned long sh_edosk7705_isa_port2addr(unsigned long offset); - -#endif /* __ASM_SH_EDOSK7705_IO_H */ diff --git a/include/asm-sh/elf.h b/include/asm-sh/elf.h deleted file mode 100644 index f01449a8d37..00000000000 --- a/include/asm-sh/elf.h +++ /dev/null @@ -1,244 +0,0 @@ -#ifndef __ASM_SH_ELF_H -#define __ASM_SH_ELF_H - -#include -#include -#include -#include - -/* ELF header e_flags defines */ -#define EF_SH_PIC 0x100 /* -fpic */ -#define EF_SH_FDPIC 0x8000 /* -mfdpic */ - -/* SH (particularly SHcompact) relocation types */ -#define R_SH_NONE 0 -#define R_SH_DIR32 1 -#define R_SH_REL32 2 -#define R_SH_DIR8WPN 3 -#define R_SH_IND12W 4 -#define R_SH_DIR8WPL 5 -#define R_SH_DIR8WPZ 6 -#define R_SH_DIR8BP 7 -#define R_SH_DIR8W 8 -#define R_SH_DIR8L 9 -#define R_SH_SWITCH16 25 -#define R_SH_SWITCH32 26 -#define R_SH_USES 27 -#define R_SH_COUNT 28 -#define R_SH_ALIGN 29 -#define R_SH_CODE 30 -#define R_SH_DATA 31 -#define R_SH_LABEL 32 -#define R_SH_SWITCH8 33 -#define R_SH_GNU_VTINHERIT 34 -#define R_SH_GNU_VTENTRY 35 -#define R_SH_TLS_GD_32 144 -#define R_SH_TLS_LD_32 145 -#define R_SH_TLS_LDO_32 146 -#define R_SH_TLS_IE_32 147 -#define R_SH_TLS_LE_32 148 -#define R_SH_TLS_DTPMOD32 149 -#define R_SH_TLS_DTPOFF32 150 -#define R_SH_TLS_TPOFF32 151 -#define R_SH_GOT32 160 -#define R_SH_PLT32 161 -#define R_SH_COPY 162 -#define R_SH_GLOB_DAT 163 -#define R_SH_JMP_SLOT 164 -#define R_SH_RELATIVE 165 -#define R_SH_GOTOFF 166 -#define R_SH_GOTPC 167 - -/* FDPIC relocs */ -#define R_SH_GOT20 70 -#define R_SH_GOTOFF20 71 -#define R_SH_GOTFUNCDESC 72 -#define R_SH_GOTFUNCDESC20 73 -#define R_SH_GOTOFFFUNCDESC 74 -#define R_SH_GOTOFFFUNCDESC20 75 -#define R_SH_FUNCDESC 76 -#define R_SH_FUNCDESC_VALUE 77 - -#if 0 /* XXX - later .. */ -#define R_SH_GOT20 198 -#define R_SH_GOTOFF20 199 -#define R_SH_GOTFUNCDESC 200 -#define R_SH_GOTFUNCDESC20 201 -#define R_SH_GOTOFFFUNCDESC 202 -#define R_SH_GOTOFFFUNCDESC20 203 -#define R_SH_FUNCDESC 204 -#define R_SH_FUNCDESC_VALUE 205 -#endif - -/* SHmedia relocs */ -#define R_SH_IMM_LOW16 246 -#define R_SH_IMM_LOW16_PCREL 247 -#define R_SH_IMM_MEDLOW16 248 -#define R_SH_IMM_MEDLOW16_PCREL 249 -/* Keep this the last entry. */ -#define R_SH_NUM 256 - -/* - * ELF register definitions.. - */ - -typedef unsigned long elf_greg_t; - -#define ELF_NGREG (sizeof (struct pt_regs) / sizeof(elf_greg_t)) -typedef elf_greg_t elf_gregset_t[ELF_NGREG]; - -typedef struct user_fpu_struct elf_fpregset_t; - -/* - * These are used to set parameters in the core dumps. - */ -#define ELF_CLASS ELFCLASS32 -#ifdef __LITTLE_ENDIAN__ -#define ELF_DATA ELFDATA2LSB -#else -#define ELF_DATA ELFDATA2MSB -#endif -#define ELF_ARCH EM_SH - -#ifdef __KERNEL__ -/* - * This is used to ensure we don't load something for the wrong architecture. - */ -#define elf_check_arch(x) ((x)->e_machine == EM_SH) -#define elf_check_fdpic(x) ((x)->e_flags & EF_SH_FDPIC) -#define elf_check_const_displacement(x) ((x)->e_flags & EF_SH_PIC) - -#define USE_ELF_CORE_DUMP -#define ELF_FDPIC_CORE_EFLAGS EF_SH_FDPIC -#define ELF_EXEC_PAGESIZE PAGE_SIZE - -/* This is the location that an ET_DYN program is loaded if exec'ed. Typical - use of this is to invoke "./ld.so someprog" to test out a new version of - the loader. We need to make sure that it is out of the way of the program - that it will "exec", and that there is sufficient room for the brk. */ - -#define ELF_ET_DYN_BASE (2 * TASK_SIZE / 3) - -#define ELF_CORE_COPY_REGS(_dest,_regs) \ - memcpy((char *) &_dest, (char *) _regs, \ - sizeof(struct pt_regs)); - -/* This yields a mask that user programs can use to figure out what - instruction set this CPU supports. This could be done in user space, - but it's not easy, and we've already done it here. */ - -#define ELF_HWCAP (boot_cpu_data.flags) - -/* This yields a string that ld.so will use to load implementation - specific libraries for optimization. This is more specific in - intent than poking at uname or /proc/cpuinfo. - - For the moment, we have only optimizations for the Intel generations, - but that could change... */ - -#define ELF_PLATFORM (utsname()->machine) - -#ifdef __SH5__ -#define ELF_PLAT_INIT(_r, load_addr) \ - do { _r->regs[0]=0; _r->regs[1]=0; _r->regs[2]=0; _r->regs[3]=0; \ - _r->regs[4]=0; _r->regs[5]=0; _r->regs[6]=0; _r->regs[7]=0; \ - _r->regs[8]=0; _r->regs[9]=0; _r->regs[10]=0; _r->regs[11]=0; \ - _r->regs[12]=0; _r->regs[13]=0; _r->regs[14]=0; _r->regs[15]=0; \ - _r->regs[16]=0; _r->regs[17]=0; _r->regs[18]=0; _r->regs[19]=0; \ - _r->regs[20]=0; _r->regs[21]=0; _r->regs[22]=0; _r->regs[23]=0; \ - _r->regs[24]=0; _r->regs[25]=0; _r->regs[26]=0; _r->regs[27]=0; \ - _r->regs[28]=0; _r->regs[29]=0; _r->regs[30]=0; _r->regs[31]=0; \ - _r->regs[32]=0; _r->regs[33]=0; _r->regs[34]=0; _r->regs[35]=0; \ - _r->regs[36]=0; _r->regs[37]=0; _r->regs[38]=0; _r->regs[39]=0; \ - _r->regs[40]=0; _r->regs[41]=0; _r->regs[42]=0; _r->regs[43]=0; \ - _r->regs[44]=0; _r->regs[45]=0; _r->regs[46]=0; _r->regs[47]=0; \ - _r->regs[48]=0; _r->regs[49]=0; _r->regs[50]=0; _r->regs[51]=0; \ - _r->regs[52]=0; _r->regs[53]=0; _r->regs[54]=0; _r->regs[55]=0; \ - _r->regs[56]=0; _r->regs[57]=0; _r->regs[58]=0; _r->regs[59]=0; \ - _r->regs[60]=0; _r->regs[61]=0; _r->regs[62]=0; \ - _r->tregs[0]=0; _r->tregs[1]=0; _r->tregs[2]=0; _r->tregs[3]=0; \ - _r->tregs[4]=0; _r->tregs[5]=0; _r->tregs[6]=0; _r->tregs[7]=0; \ - _r->sr = SR_FD | SR_MMU; } while (0) -#else -#define ELF_PLAT_INIT(_r, load_addr) \ - do { _r->regs[0]=0; _r->regs[1]=0; _r->regs[2]=0; _r->regs[3]=0; \ - _r->regs[4]=0; _r->regs[5]=0; _r->regs[6]=0; _r->regs[7]=0; \ - _r->regs[8]=0; _r->regs[9]=0; _r->regs[10]=0; _r->regs[11]=0; \ - _r->regs[12]=0; _r->regs[13]=0; _r->regs[14]=0; \ - _r->sr = SR_FD; } while (0) - -#define ELF_FDPIC_PLAT_INIT(_r, _exec_map_addr, _interp_map_addr, \ - _dynamic_addr) \ -do { \ - _r->regs[0] = 0; \ - _r->regs[1] = 0; \ - _r->regs[2] = 0; \ - _r->regs[3] = 0; \ - _r->regs[4] = 0; \ - _r->regs[5] = 0; \ - _r->regs[6] = 0; \ - _r->regs[7] = 0; \ - _r->regs[8] = _exec_map_addr; \ - _r->regs[9] = _interp_map_addr; \ - _r->regs[10] = _dynamic_addr; \ - _r->regs[11] = 0; \ - _r->regs[12] = 0; \ - _r->regs[13] = 0; \ - _r->regs[14] = 0; \ - _r->sr = SR_FD; \ -} while (0) -#endif - -#define SET_PERSONALITY(ex, ibcs2) set_personality(PER_LINUX_32BIT) -struct task_struct; -extern int dump_task_regs (struct task_struct *, elf_gregset_t *); -extern int dump_task_fpu (struct task_struct *, elf_fpregset_t *); - -#define ELF_CORE_COPY_TASK_REGS(tsk, elf_regs) dump_task_regs(tsk, elf_regs) -#define ELF_CORE_COPY_FPREGS(tsk, elf_fpregs) dump_task_fpu(tsk, elf_fpregs) - -#ifdef CONFIG_VSYSCALL -/* vDSO has arch_setup_additional_pages */ -#define ARCH_HAS_SETUP_ADDITIONAL_PAGES -struct linux_binprm; -extern int arch_setup_additional_pages(struct linux_binprm *bprm, - int executable_stack); - -extern unsigned int vdso_enabled; -extern void __kernel_vsyscall; - -#define VDSO_BASE ((unsigned long)current->mm->context.vdso) -#define VDSO_SYM(x) (VDSO_BASE + (unsigned long)(x)) - -#define VSYSCALL_AUX_ENT \ - if (vdso_enabled) \ - NEW_AUX_ENT(AT_SYSINFO_EHDR, VDSO_BASE); -#else -#define VSYSCALL_AUX_ENT -#endif /* CONFIG_VSYSCALL */ - -#ifdef CONFIG_SH_FPU -#define FPU_AUX_ENT NEW_AUX_ENT(AT_FPUCW, FPSCR_INIT) -#else -#define FPU_AUX_ENT -#endif - -extern int l1i_cache_shape, l1d_cache_shape, l2_cache_shape; - -/* update AT_VECTOR_SIZE_ARCH if the number of NEW_AUX_ENT entries changes */ -#define ARCH_DLINFO \ -do { \ - /* Optional FPU initialization */ \ - FPU_AUX_ENT; \ - \ - /* Optional vsyscall entry */ \ - VSYSCALL_AUX_ENT; \ - \ - /* Cache desc */ \ - NEW_AUX_ENT(AT_L1I_CACHESHAPE, l1i_cache_shape); \ - NEW_AUX_ENT(AT_L1D_CACHESHAPE, l1d_cache_shape); \ - NEW_AUX_ENT(AT_L2_CACHESHAPE, l2_cache_shape); \ -} while (0) - -#endif /* __KERNEL__ */ -#endif /* __ASM_SH_ELF_H */ diff --git a/include/asm-sh/emergency-restart.h b/include/asm-sh/emergency-restart.h deleted file mode 100644 index 108d8c48e42..00000000000 --- a/include/asm-sh/emergency-restart.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef _ASM_EMERGENCY_RESTART_H -#define _ASM_EMERGENCY_RESTART_H - -#include - -#endif /* _ASM_EMERGENCY_RESTART_H */ diff --git a/include/asm-sh/entry-macros.S b/include/asm-sh/entry-macros.S deleted file mode 100644 index 2dab0b8d945..00000000000 --- a/include/asm-sh/entry-macros.S +++ /dev/null @@ -1,33 +0,0 @@ -! entry.S macro define - - .macro cli - stc sr, r0 - or #0xf0, r0 - ldc r0, sr - .endm - - .macro sti - mov #0xf0, r11 - extu.b r11, r11 - not r11, r11 - stc sr, r10 - and r11, r10 -#ifdef CONFIG_CPU_HAS_SR_RB - stc k_g_imask, r11 - or r11, r10 -#endif - ldc r10, sr - .endm - - .macro get_current_thread_info, ti, tmp -#ifdef CONFIG_CPU_HAS_SR_RB - stc r7_bank, \ti -#else - mov #((THREAD_SIZE - 1) >> 10) ^ 0xff, \tmp - shll8 \tmp - shll2 \tmp - mov r15, \ti - and \tmp, \ti -#endif - .endm - diff --git a/include/asm-sh/errno.h b/include/asm-sh/errno.h deleted file mode 100644 index 51cf6f9cebb..00000000000 --- a/include/asm-sh/errno.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef __ASM_SH_ERRNO_H -#define __ASM_SH_ERRNO_H - -#include - -#endif /* __ASM_SH_ERRNO_H */ diff --git a/include/asm-sh/fb.h b/include/asm-sh/fb.h deleted file mode 100644 index d92e99cd8c8..00000000000 --- a/include/asm-sh/fb.h +++ /dev/null @@ -1,19 +0,0 @@ -#ifndef _ASM_FB_H_ -#define _ASM_FB_H_ - -#include -#include -#include - -static inline void fb_pgprotect(struct file *file, struct vm_area_struct *vma, - unsigned long off) -{ - vma->vm_page_prot = pgprot_writecombine(vma->vm_page_prot); -} - -static inline int fb_is_primary_device(struct fb_info *info) -{ - return 0; -} - -#endif /* _ASM_FB_H_ */ diff --git a/include/asm-sh/fcntl.h b/include/asm-sh/fcntl.h deleted file mode 100644 index 46ab12db573..00000000000 --- a/include/asm-sh/fcntl.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/include/asm-sh/fixmap.h b/include/asm-sh/fixmap.h deleted file mode 100644 index 721fcc4d5e9..00000000000 --- a/include/asm-sh/fixmap.h +++ /dev/null @@ -1,117 +0,0 @@ -/* - * fixmap.h: compile-time virtual memory allocation - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 1998 Ingo Molnar - * - * Support of BIGMEM added by Gerhard Wichert, Siemens AG, July 1999 - */ - -#ifndef _ASM_FIXMAP_H -#define _ASM_FIXMAP_H - -#include -#include -#ifdef CONFIG_HIGHMEM -#include -#include -#endif - -/* - * Here we define all the compile-time 'special' virtual - * addresses. The point is to have a constant address at - * compile time, but to set the physical address only - * in the boot process. We allocate these special addresses - * from the end of P3 backwards. - * Also this lets us do fail-safe vmalloc(), we - * can guarantee that these special addresses and - * vmalloc()-ed addresses never overlap. - * - * these 'compile-time allocated' memory buffers are - * fixed-size 4k pages. (or larger if used with an increment - * highger than 1) use fixmap_set(idx,phys) to associate - * physical memory with fixmap indices. - * - * TLB entries of such buffers will not be flushed across - * task switches. - */ - -/* - * on UP currently we will have no trace of the fixmap mechanizm, - * no page table allocations, etc. This might change in the - * future, say framebuffers for the console driver(s) could be - * fix-mapped? - */ -enum fixed_addresses { -#define FIX_N_COLOURS 16 - FIX_CMAP_BEGIN, - FIX_CMAP_END = FIX_CMAP_BEGIN + FIX_N_COLOURS, - FIX_UNCACHED, -#ifdef CONFIG_HIGHMEM - FIX_KMAP_BEGIN, /* reserved pte's for temporary kernel mappings */ - FIX_KMAP_END = FIX_KMAP_BEGIN+(KM_TYPE_NR*NR_CPUS)-1, -#endif - __end_of_fixed_addresses -}; - -extern void __set_fixmap(enum fixed_addresses idx, - unsigned long phys, pgprot_t flags); - -#define set_fixmap(idx, phys) \ - __set_fixmap(idx, phys, PAGE_KERNEL) -/* - * Some hardware wants to get fixmapped without caching. - */ -#define set_fixmap_nocache(idx, phys) \ - __set_fixmap(idx, phys, PAGE_KERNEL_NOCACHE) -/* - * used by vmalloc.c. - * - * Leave one empty page between vmalloc'ed areas and - * the start of the fixmap, and leave one page empty - * at the top of mem.. - */ -#ifdef CONFIG_SUPERH32 -#define FIXADDR_TOP (P4SEG - PAGE_SIZE) -#else -#define FIXADDR_TOP (0xff000000 - PAGE_SIZE) -#endif -#define FIXADDR_SIZE (__end_of_fixed_addresses << PAGE_SHIFT) -#define FIXADDR_START (FIXADDR_TOP - FIXADDR_SIZE) - -#define __fix_to_virt(x) (FIXADDR_TOP - ((x) << PAGE_SHIFT)) -#define __virt_to_fix(x) ((FIXADDR_TOP - ((x)&PAGE_MASK)) >> PAGE_SHIFT) - -extern void __this_fixmap_does_not_exist(void); - -/* - * 'index to address' translation. If anyone tries to use the idx - * directly without tranlation, we catch the bug with a NULL-deference - * kernel oops. Illegal ranges of incoming indices are caught too. - */ -static inline unsigned long fix_to_virt(const unsigned int idx) -{ - /* - * this branch gets completely eliminated after inlining, - * except when someone tries to use fixaddr indices in an - * illegal way. (such as mixing up address types or using - * out-of-range indices). - * - * If it doesn't get removed, the linker will complain - * loudly with a reasonably clear error message.. - */ - if (idx >= __end_of_fixed_addresses) - __this_fixmap_does_not_exist(); - - return __fix_to_virt(idx); -} - -static inline unsigned long virt_to_fix(const unsigned long vaddr) -{ - BUG_ON(vaddr >= FIXADDR_TOP || vaddr < FIXADDR_START); - return __virt_to_fix(vaddr); -} -#endif diff --git a/include/asm-sh/flat.h b/include/asm-sh/flat.h deleted file mode 100644 index 0cc800299e0..00000000000 --- a/include/asm-sh/flat.h +++ /dev/null @@ -1,24 +0,0 @@ -/* - * include/asm-sh/flat.h - * - * uClinux flat-format executables - * - * Copyright (C) 2003 Paul Mundt - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive for - * more details. - */ -#ifndef __ASM_SH_FLAT_H -#define __ASM_SH_FLAT_H - -#define flat_stack_align(sp) /* nothing needed */ -#define flat_argvp_envp_on_stack() 0 -#define flat_old_ram_flag(flags) (flags) -#define flat_reloc_valid(reloc, size) ((reloc) <= (size)) -#define flat_get_addr_from_rp(rp, relval, flags, p) get_unaligned(rp) -#define flat_put_addr_at_rp(rp, val, relval) put_unaligned(val,rp) -#define flat_get_relocate_addr(rel) (rel) -#define flat_set_persistent(relval, p) ({ (void)p; 0; }) - -#endif /* __ASM_SH_FLAT_H */ diff --git a/include/asm-sh/fpu.h b/include/asm-sh/fpu.h deleted file mode 100644 index 91462fea150..00000000000 --- a/include/asm-sh/fpu.h +++ /dev/null @@ -1,55 +0,0 @@ -#ifndef __ASM_SH_FPU_H -#define __ASM_SH_FPU_H - -#ifndef __ASSEMBLY__ -#include -#include - -#ifdef CONFIG_SH_FPU -static inline void release_fpu(struct pt_regs *regs) -{ - regs->sr |= SR_FD; -} - -static inline void grab_fpu(struct pt_regs *regs) -{ - regs->sr &= ~SR_FD; -} - -struct task_struct; - -extern void save_fpu(struct task_struct *__tsk, struct pt_regs *regs); -#else - -#define release_fpu(regs) do { } while (0) -#define grab_fpu(regs) do { } while (0) - -static inline void save_fpu(struct task_struct *tsk, struct pt_regs *regs) -{ - clear_tsk_thread_flag(tsk, TIF_USEDFPU); -} -#endif - -extern int do_fpu_inst(unsigned short, struct pt_regs *); - -static inline void unlazy_fpu(struct task_struct *tsk, struct pt_regs *regs) -{ - preempt_disable(); - if (test_tsk_thread_flag(tsk, TIF_USEDFPU)) - save_fpu(tsk, regs); - preempt_enable(); -} - -static inline void clear_fpu(struct task_struct *tsk, struct pt_regs *regs) -{ - preempt_disable(); - if (test_tsk_thread_flag(tsk, TIF_USEDFPU)) { - clear_tsk_thread_flag(tsk, TIF_USEDFPU); - release_fpu(regs); - } - preempt_enable(); -} - -#endif /* __ASSEMBLY__ */ - -#endif /* __ASM_SH_FPU_H */ diff --git a/include/asm-sh/freq.h b/include/asm-sh/freq.h deleted file mode 100644 index 39c0e091cf5..00000000000 --- a/include/asm-sh/freq.h +++ /dev/null @@ -1,18 +0,0 @@ -/* - * include/asm-sh/freq.h - * - * Copyright (C) 2002, 2003 Paul Mundt - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ -#ifndef __ASM_SH_FREQ_H -#define __ASM_SH_FREQ_H -#ifdef __KERNEL__ - -#include - -#endif /* __KERNEL__ */ -#endif /* __ASM_SH_FREQ_H */ diff --git a/include/asm-sh/futex-irq.h b/include/asm-sh/futex-irq.h deleted file mode 100644 index a9f16a7f9ae..00000000000 --- a/include/asm-sh/futex-irq.h +++ /dev/null @@ -1,111 +0,0 @@ -#ifndef __ASM_SH_FUTEX_IRQ_H -#define __ASM_SH_FUTEX_IRQ_H - -#include - -static inline int atomic_futex_op_xchg_set(int oparg, int __user *uaddr, - int *oldval) -{ - unsigned long flags; - int ret; - - local_irq_save(flags); - - ret = get_user(*oldval, uaddr); - if (!ret) - ret = put_user(oparg, uaddr); - - local_irq_restore(flags); - - return ret; -} - -static inline int atomic_futex_op_xchg_add(int oparg, int __user *uaddr, - int *oldval) -{ - unsigned long flags; - int ret; - - local_irq_save(flags); - - ret = get_user(*oldval, uaddr); - if (!ret) - ret = put_user(*oldval + oparg, uaddr); - - local_irq_restore(flags); - - return ret; -} - -static inline int atomic_futex_op_xchg_or(int oparg, int __user *uaddr, - int *oldval) -{ - unsigned long flags; - int ret; - - local_irq_save(flags); - - ret = get_user(*oldval, uaddr); - if (!ret) - ret = put_user(*oldval | oparg, uaddr); - - local_irq_restore(flags); - - return ret; -} - -static inline int atomic_futex_op_xchg_and(int oparg, int __user *uaddr, - int *oldval) -{ - unsigned long flags; - int ret; - - local_irq_save(flags); - - ret = get_user(*oldval, uaddr); - if (!ret) - ret = put_user(*oldval & oparg, uaddr); - - local_irq_restore(flags); - - return ret; -} - -static inline int atomic_futex_op_xchg_xor(int oparg, int __user *uaddr, - int *oldval) -{ - unsigned long flags; - int ret; - - local_irq_save(flags); - - ret = get_user(*oldval, uaddr); - if (!ret) - ret = put_user(*oldval ^ oparg, uaddr); - - local_irq_restore(flags); - - return ret; -} - -static inline int atomic_futex_op_cmpxchg_inatomic(int __user *uaddr, - int oldval, int newval) -{ - unsigned long flags; - int ret, prev = 0; - - local_irq_save(flags); - - ret = get_user(prev, uaddr); - if (!ret && oldval == prev) - ret = put_user(newval, uaddr); - - local_irq_restore(flags); - - if (ret) - return ret; - - return prev; -} - -#endif /* __ASM_SH_FUTEX_IRQ_H */ diff --git a/include/asm-sh/futex.h b/include/asm-sh/futex.h deleted file mode 100644 index 68256ec5fa3..00000000000 --- a/include/asm-sh/futex.h +++ /dev/null @@ -1,77 +0,0 @@ -#ifndef __ASM_SH_FUTEX_H -#define __ASM_SH_FUTEX_H - -#ifdef __KERNEL__ - -#include -#include -#include - -/* XXX: UP variants, fix for SH-4A and SMP.. */ -#include - -static inline int futex_atomic_op_inuser(int encoded_op, int __user *uaddr) -{ - int op = (encoded_op >> 28) & 7; - int cmp = (encoded_op >> 24) & 15; - int oparg = (encoded_op << 8) >> 20; - int cmparg = (encoded_op << 20) >> 20; - int oldval = 0, ret; - - if (encoded_op & (FUTEX_OP_OPARG_SHIFT << 28)) - oparg = 1 << oparg; - - if (!access_ok(VERIFY_WRITE, uaddr, sizeof(int))) - return -EFAULT; - - pagefault_disable(); - - switch (op) { - case FUTEX_OP_SET: - ret = atomic_futex_op_xchg_set(oparg, uaddr, &oldval); - break; - case FUTEX_OP_ADD: - ret = atomic_futex_op_xchg_add(oparg, uaddr, &oldval); - break; - case FUTEX_OP_OR: - ret = atomic_futex_op_xchg_or(oparg, uaddr, &oldval); - break; - case FUTEX_OP_ANDN: - ret = atomic_futex_op_xchg_and(~oparg, uaddr, &oldval); - break; - case FUTEX_OP_XOR: - ret = atomic_futex_op_xchg_xor(oparg, uaddr, &oldval); - break; - default: - ret = -ENOSYS; - break; - } - - pagefault_enable(); - - if (!ret) { - switch (cmp) { - case FUTEX_OP_CMP_EQ: ret = (oldval == cmparg); break; - case FUTEX_OP_CMP_NE: ret = (oldval != cmparg); break; - case FUTEX_OP_CMP_LT: ret = (oldval < cmparg); break; - case FUTEX_OP_CMP_GE: ret = (oldval >= cmparg); break; - case FUTEX_OP_CMP_LE: ret = (oldval <= cmparg); break; - case FUTEX_OP_CMP_GT: ret = (oldval > cmparg); break; - default: ret = -ENOSYS; - } - } - - return ret; -} - -static inline int -futex_atomic_cmpxchg_inatomic(int __user *uaddr, int oldval, int newval) -{ - if (!access_ok(VERIFY_WRITE, uaddr, sizeof(int))) - return -EFAULT; - - return atomic_futex_op_cmpxchg_inatomic(uaddr, oldval, newval); -} - -#endif /* __KERNEL__ */ -#endif /* __ASM_SH_FUTEX_H */ diff --git a/include/asm-sh/gpio.h b/include/asm-sh/gpio.h deleted file mode 100644 index 9bb27e0f11a..00000000000 --- a/include/asm-sh/gpio.h +++ /dev/null @@ -1,19 +0,0 @@ -/* - * include/asm-sh/gpio.h - * - * Copyright (C) 2007 Markus Brunner, Mark Jonas - * - * Addresses for the Pin Function Controller - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ -#ifndef __ASM_SH_GPIO_H -#define __ASM_SH_GPIO_H - -#if defined(CONFIG_CPU_SH3) -#include -#endif - -#endif /* __ASM_SH_GPIO_H */ diff --git a/include/asm-sh/hardirq.h b/include/asm-sh/hardirq.h deleted file mode 100644 index 715ee237fc7..00000000000 --- a/include/asm-sh/hardirq.h +++ /dev/null @@ -1,16 +0,0 @@ -#ifndef __ASM_SH_HARDIRQ_H -#define __ASM_SH_HARDIRQ_H - -#include -#include - -/* entry.S is sensitive to the offsets of these fields */ -typedef struct { - unsigned int __softirq_pending; -} ____cacheline_aligned irq_cpustat_t; - -#include /* Standard mappings for irq_cpustat_t above */ - -extern void ack_bad_irq(unsigned int irq); - -#endif /* __ASM_SH_HARDIRQ_H */ diff --git a/include/asm-sh/hd64461.h b/include/asm-sh/hd64461.h deleted file mode 100644 index 8c1353baf00..00000000000 --- a/include/asm-sh/hd64461.h +++ /dev/null @@ -1,250 +0,0 @@ -#ifndef __ASM_SH_HD64461 -#define __ASM_SH_HD64461 -/* - * Copyright (C) 2007 Kristoffer Ericson - * Copyright (C) 2004 Paul Mundt - * Copyright (C) 2000 YAEGASHI Takeshi - * - * Hitachi HD64461 companion chip support - * (please note manual reference 0x10000000 = 0xb0000000) - */ - -/* Constants for PCMCIA mappings */ -#define HD64461_PCC_WINDOW 0x01000000 - -/* Area 6 - Slot 0 - memory and/or IO card */ -#define HD64461_PCC0_BASE (CONFIG_HD64461_IOBASE + 0x8000000) -#define HD64461_PCC0_ATTR (HD64461_PCC0_BASE) /* 0xb80000000 */ -#define HD64461_PCC0_COMM (HD64461_PCC0_BASE+HD64461_PCC_WINDOW) /* 0xb90000000 */ -#define HD64461_PCC0_IO (HD64461_PCC0_BASE+2*HD64461_PCC_WINDOW) /* 0xba0000000 */ - -/* Area 5 - Slot 1 - memory card only */ -#define HD64461_PCC1_BASE (CONFIG_HD64461_IOBASE + 0x4000000) -#define HD64461_PCC1_ATTR (HD64461_PCC1_BASE) /* 0xb4000000 */ -#define HD64461_PCC1_COMM (HD64461_PCC1_BASE+HD64461_PCC_WINDOW) /* 0xb5000000 */ - -/* Standby Control Register for HD64461 */ -#define HD64461_STBCR CONFIG_HD64461_IOBASE -#define HD64461_STBCR_CKIO_STBY 0x2000 -#define HD64461_STBCR_SAFECKE_IST 0x1000 -#define HD64461_STBCR_SLCKE_IST 0x0800 -#define HD64461_STBCR_SAFECKE_OST 0x0400 -#define HD64461_STBCR_SLCKE_OST 0x0200 -#define HD64461_STBCR_SMIAST 0x0100 -#define HD64461_STBCR_SLCDST 0x0080 -#define HD64461_STBCR_SPC0ST 0x0040 -#define HD64461_STBCR_SPC1ST 0x0020 -#define HD64461_STBCR_SAFEST 0x0010 -#define HD64461_STBCR_STM0ST 0x0008 -#define HD64461_STBCR_STM1ST 0x0004 -#define HD64461_STBCR_SIRST 0x0002 -#define HD64461_STBCR_SURTST 0x0001 - -/* System Configuration Register */ -#define HD64461_SYSCR (CONFIG_HD64461_IOBASE + 0x02) - -/* CPU Data Bus Control Register */ -#define HD64461_SCPUCR (CONFIG_HD64461_IOBASE + 0x04) - -/* Base Address Register */ -#define HD64461_LCDCBAR (CONFIG_HD64461_IOBASE + 0x1000) - -/* Line increment address */ -#define HD64461_LCDCLOR (CONFIG_HD64461_IOBASE + 0x1002) - -/* Controls LCD controller */ -#define HD64461_LCDCCR (CONFIG_HD64461_IOBASE + 0x1004) - -/* LCCDR control bits */ -#define HD64461_LCDCCR_STBACK 0x0400 /* Standby Back */ -#define HD64461_LCDCCR_STREQ 0x0100 /* Standby Request */ -#define HD64461_LCDCCR_MOFF 0x0080 /* Memory Off */ -#define HD64461_LCDCCR_REFSEL 0x0040 /* Refresh Select */ -#define HD64461_LCDCCR_EPON 0x0020 /* End Power On */ -#define HD64461_LCDCCR_SPON 0x0010 /* Start Power On */ - -/* Controls LCD (1) */ -#define HD64461_LDR1 (CONFIG_HD64461_IOBASE + 0x1010) -#define HD64461_LDR1_DON 0x01 /* Display On */ -#define HD64461_LDR1_DINV 0x80 /* Display Invert */ - -/* Controls LCD (2) */ -#define HD64461_LDR2 (CONFIG_HD64461_IOBASE + 0x1012) -#define HD64461_LDHNCR (CONFIG_HD64461_IOBASE + 0x1014) /* Number of horizontal characters */ -#define HD64461_LDHNSR (CONFIG_HD64461_IOBASE + 0x1016) /* Specify output start position + width of CL1 */ -#define HD64461_LDVNTR (CONFIG_HD64461_IOBASE + 0x1018) /* Specify total vertical lines */ -#define HD64461_LDVNDR (CONFIG_HD64461_IOBASE + 0x101a) /* specify number of display vertical lines */ -#define HD64461_LDVSPR (CONFIG_HD64461_IOBASE + 0x101c) /* specify vertical synchronization pos and AC nr */ - -/* Controls LCD (3) */ -#define HD64461_LDR3 (CONFIG_HD64461_IOBASE + 0x101e) - -/* Palette Registers */ -#define HD64461_CPTWAR (CONFIG_HD64461_IOBASE + 0x1030) /* Color Palette Write Address Register */ -#define HD64461_CPTWDR (CONFIG_HD64461_IOBASE + 0x1032) /* Color Palette Write Data Register */ -#define HD64461_CPTRAR (CONFIG_HD64461_IOBASE + 0x1034) /* Color Palette Read Address Register */ -#define HD64461_CPTRDR (CONFIG_HD64461_IOBASE + 0x1036) /* Color Palette Read Data Register */ - -#define HD64461_GRDOR (CONFIG_HD64461_IOBASE + 0x1040) /* Display Resolution Offset Register */ -#define HD64461_GRSCR (CONFIG_HD64461_IOBASE + 0x1042) /* Solid Color Register */ -#define HD64461_GRCFGR (CONFIG_HD64461_IOBASE + 0x1044) /* Accelerator Configuration Register */ - -#define HD64461_GRCFGR_ACCSTATUS 0x10 /* Accelerator Status */ -#define HD64461_GRCFGR_ACCRESET 0x08 /* Accelerator Reset */ -#define HD64461_GRCFGR_ACCSTART_BITBLT 0x06 /* Accelerator Start BITBLT */ -#define HD64461_GRCFGR_ACCSTART_LINE 0x04 /* Accelerator Start Line Drawing */ -#define HD64461_GRCFGR_COLORDEPTH16 0x01 /* Sets Colordepth 16 for Accelerator */ -#define HD64461_GRCFGR_COLORDEPTH8 0x01 /* Sets Colordepth 8 for Accelerator */ - -/* Line Drawing Registers */ -#define HD64461_LNSARH (CONFIG_HD64461_IOBASE + 0x1046) /* Line Start Address Register (H) */ -#define HD64461_LNSARL (CONFIG_HD64461_IOBASE + 0x1048) /* Line Start Address Register (L) */ -#define HD64461_LNAXLR (CONFIG_HD64461_IOBASE + 0x104a) /* Axis Pixel Length Register */ -#define HD64461_LNDGR (CONFIG_HD64461_IOBASE + 0x104c) /* Diagonal Register */ -#define HD64461_LNAXR (CONFIG_HD64461_IOBASE + 0x104e) /* Axial Register */ -#define HD64461_LNERTR (CONFIG_HD64461_IOBASE + 0x1050) /* Start Error Term Register */ -#define HD64461_LNMDR (CONFIG_HD64461_IOBASE + 0x1052) /* Line Mode Register */ - -/* BitBLT Registers */ -#define HD64461_BBTSSARH (CONFIG_HD64461_IOBASE + 0x1054) /* Source Start Address Register (H) */ -#define HD64461_BBTSSARL (CONFIG_HD64461_IOBASE + 0x1056) /* Source Start Address Register (L) */ -#define HD64461_BBTDSARH (CONFIG_HD64461_IOBASE + 0x1058) /* Destination Start Address Register (H) */ -#define HD64461_BBTDSARL (CONFIG_HD64461_IOBASE + 0x105a) /* Destination Start Address Register (L) */ -#define HD64461_BBTDWR (CONFIG_HD64461_IOBASE + 0x105c) /* Destination Block Width Register */ -#define HD64461_BBTDHR (CONFIG_HD64461_IOBASE + 0x105e) /* Destination Block Height Register */ -#define HD64461_BBTPARH (CONFIG_HD64461_IOBASE + 0x1060) /* Pattern Start Address Register (H) */ -#define HD64461_BBTPARL (CONFIG_HD64461_IOBASE + 0x1062) /* Pattern Start Address Register (L) */ -#define HD64461_BBTMARH (CONFIG_HD64461_IOBASE + 0x1064) /* Mask Start Address Register (H) */ -#define HD64461_BBTMARL (CONFIG_HD64461_IOBASE + 0x1066) /* Mask Start Address Register (L) */ -#define HD64461_BBTROPR (CONFIG_HD64461_IOBASE + 0x1068) /* ROP Register */ -#define HD64461_BBTMDR (CONFIG_HD64461_IOBASE + 0x106a) /* BitBLT Mode Register */ - -/* PC Card Controller Registers */ -/* Maps to Physical Area 6 */ -#define HD64461_PCC0ISR (CONFIG_HD64461_IOBASE + 0x2000) /* socket 0 interface status */ -#define HD64461_PCC0GCR (CONFIG_HD64461_IOBASE + 0x2002) /* socket 0 general control */ -#define HD64461_PCC0CSCR (CONFIG_HD64461_IOBASE + 0x2004) /* socket 0 card status change */ -#define HD64461_PCC0CSCIER (CONFIG_HD64461_IOBASE + 0x2006) /* socket 0 card status change interrupt enable */ -#define HD64461_PCC0SCR (CONFIG_HD64461_IOBASE + 0x2008) /* socket 0 software control */ -/* Maps to Physical Area 5 */ -#define HD64461_PCC1ISR (CONFIG_HD64461_IOBASE + 0x2010) /* socket 1 interface status */ -#define HD64461_PCC1GCR (CONFIG_HD64461_IOBASE + 0x2012) /* socket 1 general control */ -#define HD64461_PCC1CSCR (CONFIG_HD64461_IOBASE + 0x2014) /* socket 1 card status change */ -#define HD64461_PCC1CSCIER (CONFIG_HD64461_IOBASE + 0x2016) /* socket 1 card status change interrupt enable */ -#define HD64461_PCC1SCR (CONFIG_HD64461_IOBASE + 0x2018) /* socket 1 software control */ - -/* PCC Interface Status Register */ -#define HD64461_PCCISR_READY 0x80 /* card ready */ -#define HD64461_PCCISR_MWP 0x40 /* card write-protected */ -#define HD64461_PCCISR_VS2 0x20 /* voltage select pin 2 */ -#define HD64461_PCCISR_VS1 0x10 /* voltage select pin 1 */ -#define HD64461_PCCISR_CD2 0x08 /* card detect 2 */ -#define HD64461_PCCISR_CD1 0x04 /* card detect 1 */ -#define HD64461_PCCISR_BVD2 0x02 /* battery 1 */ -#define HD64461_PCCISR_BVD1 0x01 /* battery 1 */ - -#define HD64461_PCCISR_PCD_MASK 0x0c /* card detect */ -#define HD64461_PCCISR_BVD_MASK 0x03 /* battery voltage */ -#define HD64461_PCCISR_BVD_BATGOOD 0x03 /* battery good */ -#define HD64461_PCCISR_BVD_BATWARN 0x01 /* battery low warning */ -#define HD64461_PCCISR_BVD_BATDEAD1 0x02 /* battery dead */ -#define HD64461_PCCISR_BVD_BATDEAD2 0x00 /* battery dead */ - -/* PCC General Control Register */ -#define HD64461_PCCGCR_DRVE 0x80 /* output drive */ -#define HD64461_PCCGCR_PCCR 0x40 /* PC card reset */ -#define HD64461_PCCGCR_PCCT 0x20 /* PC card type, 1=IO&mem, 0=mem */ -#define HD64461_PCCGCR_VCC0 0x10 /* voltage control pin VCC0SEL0 */ -#define HD64461_PCCGCR_PMMOD 0x08 /* memory mode */ -#define HD64461_PCCGCR_PA25 0x04 /* pin A25 */ -#define HD64461_PCCGCR_PA24 0x02 /* pin A24 */ -#define HD64461_PCCGCR_REG 0x01 /* pin PCC0REG# */ - -/* PCC Card Status Change Register */ -#define HD64461_PCCCSCR_SCDI 0x80 /* sw card detect intr */ -#define HD64461_PCCCSCR_SRV1 0x40 /* reserved */ -#define HD64461_PCCCSCR_IREQ 0x20 /* IREQ intr req */ -#define HD64461_PCCCSCR_SC 0x10 /* STSCHG (status change) pin */ -#define HD64461_PCCCSCR_CDC 0x08 /* CD (card detect) change */ -#define HD64461_PCCCSCR_RC 0x04 /* READY change */ -#define HD64461_PCCCSCR_BW 0x02 /* battery warning change */ -#define HD64461_PCCCSCR_BD 0x01 /* battery dead change */ - -/* PCC Card Status Change Interrupt Enable Register */ -#define HD64461_PCCCSCIER_CRE 0x80 /* change reset enable */ -#define HD64461_PCCCSCIER_IREQE_MASK 0x60 /* IREQ enable */ -#define HD64461_PCCCSCIER_IREQE_DISABLED 0x00 /* IREQ disabled */ -#define HD64461_PCCCSCIER_IREQE_LEVEL 0x20 /* IREQ level-triggered */ -#define HD64461_PCCCSCIER_IREQE_FALLING 0x40 /* IREQ falling-edge-trig */ -#define HD64461_PCCCSCIER_IREQE_RISING 0x60 /* IREQ rising-edge-trig */ - -#define HD64461_PCCCSCIER_SCE 0x10 /* status change enable */ -#define HD64461_PCCCSCIER_CDE 0x08 /* card detect change enable */ -#define HD64461_PCCCSCIER_RE 0x04 /* ready change enable */ -#define HD64461_PCCCSCIER_BWE 0x02 /* battery warn change enable */ -#define HD64461_PCCCSCIER_BDE 0x01 /* battery dead change enable*/ - -/* PCC Software Control Register */ -#define HD64461_PCCSCR_VCC1 0x02 /* voltage control pin 1 */ -#define HD64461_PCCSCR_SWP 0x01 /* write protect */ - -/* PCC0 Output Pins Control Register */ -#define HD64461_P0OCR (CONFIG_HD64461_IOBASE + 0x202a) - -/* PCC1 Output Pins Control Register */ -#define HD64461_P1OCR (CONFIG_HD64461_IOBASE + 0x202c) - -/* PC Card General Control Register */ -#define HD64461_PGCR (CONFIG_HD64461_IOBASE + 0x202e) - -/* Port Control Registers */ -#define HD64461_GPACR (CONFIG_HD64461_IOBASE + 0x4000) /* Port A - Handles IRDA/TIMER */ -#define HD64461_GPBCR (CONFIG_HD64461_IOBASE + 0x4002) /* Port B - Handles UART */ -#define HD64461_GPCCR (CONFIG_HD64461_IOBASE + 0x4004) /* Port C - Handles PCMCIA 1 */ -#define HD64461_GPDCR (CONFIG_HD64461_IOBASE + 0x4006) /* Port D - Handles PCMCIA 1 */ - -/* Port Control Data Registers */ -#define HD64461_GPADR (CONFIG_HD64461_IOBASE + 0x4010) /* A */ -#define HD64461_GPBDR (CONFIG_HD64461_IOBASE + 0x4012) /* B */ -#define HD64461_GPCDR (CONFIG_HD64461_IOBASE + 0x4014) /* C */ -#define HD64461_GPDDR (CONFIG_HD64461_IOBASE + 0x4016) /* D */ - -/* Interrupt Control Registers */ -#define HD64461_GPAICR (CONFIG_HD64461_IOBASE + 0x4020) /* A */ -#define HD64461_GPBICR (CONFIG_HD64461_IOBASE + 0x4022) /* B */ -#define HD64461_GPCICR (CONFIG_HD64461_IOBASE + 0x4024) /* C */ -#define HD64461_GPDICR (CONFIG_HD64461_IOBASE + 0x4026) /* D */ - -/* Interrupt Status Registers */ -#define HD64461_GPAISR (CONFIG_HD64461_IOBASE + 0x4040) /* A */ -#define HD64461_GPBISR (CONFIG_HD64461_IOBASE + 0x4042) /* B */ -#define HD64461_GPCISR (CONFIG_HD64461_IOBASE + 0x4044) /* C */ -#define HD64461_GPDISR (CONFIG_HD64461_IOBASE + 0x4046) /* D */ - -/* Interrupt Request Register & Interrupt Mask Register */ -#define HD64461_NIRR (CONFIG_HD64461_IOBASE + 0x5000) -#define HD64461_NIMR (CONFIG_HD64461_IOBASE + 0x5002) - -#define HD64461_IRQBASE OFFCHIP_IRQ_BASE -#define OFFCHIP_IRQ_BASE 64 -#define HD64461_IRQ_NUM 16 - -#define HD64461_IRQ_UART (HD64461_IRQBASE+5) -#define HD64461_IRQ_IRDA (HD64461_IRQBASE+6) -#define HD64461_IRQ_TMU1 (HD64461_IRQBASE+9) -#define HD64461_IRQ_TMU0 (HD64461_IRQBASE+10) -#define HD64461_IRQ_GPIO (HD64461_IRQBASE+11) -#define HD64461_IRQ_AFE (HD64461_IRQBASE+12) -#define HD64461_IRQ_PCC1 (HD64461_IRQBASE+13) -#define HD64461_IRQ_PCC0 (HD64461_IRQBASE+14) - -#define __IO_PREFIX hd64461 -#include - -/* arch/sh/cchips/hd6446x/hd64461/setup.c */ -int hd64461_irq_demux(int irq); -void hd64461_register_irq_demux(int irq, - int (*demux) (int irq, void *dev), void *dev); -void hd64461_unregister_irq_demux(int irq); - -#endif diff --git a/include/asm-sh/hd64465/gpio.h b/include/asm-sh/hd64465/gpio.h deleted file mode 100644 index a3cdca2713d..00000000000 --- a/include/asm-sh/hd64465/gpio.h +++ /dev/null @@ -1,46 +0,0 @@ -#ifndef _ASM_SH_HD64465_GPIO_ -#define _ASM_SH_HD64465_GPIO_ 1 -/* - * $Id: gpio.h,v 1.3 2003/05/04 19:30:14 lethal Exp $ - * - * Hitachi HD64465 companion chip: General Purpose IO pins support. - * This layer enables other device drivers to configure GPIO - * pins, get and set their values, and register an interrupt - * routine for when input pins change in hardware. - * - * by Greg Banks - * (c) 2000 PocketPenguins Inc. - */ -#include - -/* Macro to construct a portpin number (used in all - * subsequent functions) from a port letter and a pin - * number, e.g. HD64465_GPIO_PORTPIN('A', 5). - */ -#define HD64465_GPIO_PORTPIN(port,pin) (((port)-'A')<<3|(pin)) - -/* Pin configuration constants for _configure() */ -#define HD64465_GPIO_FUNCTION2 0 /* use the pin's *other* function */ -#define HD64465_GPIO_OUT 1 /* output */ -#define HD64465_GPIO_IN_PULLUP 2 /* input, pull-up MOS on */ -#define HD64465_GPIO_IN 3 /* input */ - -/* Configure a pin's direction */ -extern void hd64465_gpio_configure(int portpin, int direction); - -/* Get, set value */ -extern void hd64465_gpio_set_pin(int portpin, unsigned int value); -extern unsigned int hd64465_gpio_get_pin(int portpin); -extern void hd64465_gpio_set_port(int port, unsigned int value); -extern unsigned int hd64465_gpio_get_port(int port); - -/* mode constants for _register_irq() */ -#define HD64465_GPIO_FALLING 0 -#define HD64465_GPIO_RISING 1 - -/* Interrupt on external value change */ -extern void hd64465_gpio_register_irq(int portpin, int mode, - void (*handler)(int portpin, void *dev), void *dev); -extern void hd64465_gpio_unregister_irq(int portpin); - -#endif /* _ASM_SH_HD64465_GPIO_ */ diff --git a/include/asm-sh/hd64465/hd64465.h b/include/asm-sh/hd64465/hd64465.h deleted file mode 100644 index cfd0e803d2a..00000000000 --- a/include/asm-sh/hd64465/hd64465.h +++ /dev/null @@ -1,256 +0,0 @@ -#ifndef _ASM_SH_HD64465_ -#define _ASM_SH_HD64465_ 1 -/* - * $Id: hd64465.h,v 1.3 2003/05/04 19:30:15 lethal Exp $ - * - * Hitachi HD64465 companion chip support - * - * by Greg Banks - * (c) 2000 PocketPenguins Inc. - * - * Derived from which bore the message: - * Copyright (C) 2000 YAEGASHI Takeshi - */ -#include -#include - -/* - * Note that registers are defined here as virtual port numbers, - * which have no meaning except to get translated by hd64465_isa_port2addr() - * to an address in the range 0xb0000000-0xb3ffffff. Note that - * this translation happens to consist of adding the lower 16 bits - * of the virtual port number to 0xb0000000. Note also that the manual - * shows addresses as absolute physical addresses starting at 0x10000000, - * so e.g. the NIRR register is listed as 0x15000 here, 0x10005000 in the - * manual, and accessed using address 0xb0005000 - Greg. - */ - -/* System registers */ -#define HD64465_REG_SRR 0x1000c /* System Revision Register */ -#define HD64465_REG_SDID 0x10010 /* System Device ID Reg */ -#define HD64465_SDID 0x8122 /* 64465 device ID */ - -/* Power Management registers */ -#define HD64465_REG_SMSCR 0x10000 /* System Module Standby Control Reg */ -#define HD64465_SMSCR_PS2ST 0x4000 /* PS/2 Standby */ -#define HD64465_SMSCR_ADCST 0x1000 /* ADC Standby */ -#define HD64465_SMSCR_UARTST 0x0800 /* UART Standby */ -#define HD64465_SMSCR_SCDIST 0x0200 /* Serial Codec Standby */ -#define HD64465_SMSCR_PPST 0x0100 /* Parallel Port Standby */ -#define HD64465_SMSCR_PC0ST 0x0040 /* PCMCIA0 Standby */ -#define HD64465_SMSCR_PC1ST 0x0020 /* PCMCIA1 Standby */ -#define HD64465_SMSCR_AFEST 0x0010 /* AFE Standby */ -#define HD64465_SMSCR_TM0ST 0x0008 /* Timer0 Standby */ -#define HD64465_SMSCR_TM1ST 0x0004 /* Timer1 Standby */ -#define HD64465_SMSCR_IRDAST 0x0002 /* IRDA Standby */ -#define HD64465_SMSCR_KBCST 0x0001 /* Keyboard Controller Standby */ - -/* Interrupt Controller registers */ -#define HD64465_REG_NIRR 0x15000 /* Interrupt Request Register */ -#define HD64465_REG_NIMR 0x15002 /* Interrupt Mask Register */ -#define HD64465_REG_NITR 0x15004 /* Interrupt Trigger Mode Register */ - -/* Timer registers */ -#define HD64465_REG_TCVR1 0x16000 /* Timer 1 constant value register */ -#define HD64465_REG_TCVR0 0x16002 /* Timer 0 constant value register */ -#define HD64465_REG_TRVR1 0x16004 /* Timer 1 read value register */ -#define HD64465_REG_TRVR0 0x16006 /* Timer 0 read value register */ -#define HD64465_REG_TCR1 0x16008 /* Timer 1 control register */ -#define HD64465_REG_TCR0 0x1600A /* Timer 0 control register */ -#define HD64465_TCR_EADT 0x10 /* Enable ADTRIG# signal */ -#define HD64465_TCR_ETMO 0x08 /* Enable TMO signal */ -#define HD64465_TCR_PST_MASK 0x06 /* Clock Prescale */ -#define HD64465_TCR_PST_1 0x06 /* 1:1 */ -#define HD64465_TCR_PST_4 0x04 /* 1:4 */ -#define HD64465_TCR_PST_8 0x02 /* 1:8 */ -#define HD64465_TCR_PST_16 0x00 /* 1:16 */ -#define HD64465_TCR_TSTP 0x01 /* Start/Stop timer */ -#define HD64465_REG_TIRR 0x1600C /* Timer interrupt request register */ -#define HD64465_REG_TIDR 0x1600E /* Timer interrupt disable register */ -#define HD64465_REG_PWM1CS 0x16010 /* PWM 1 clock scale register */ -#define HD64465_REG_PWM1LPC 0x16012 /* PWM 1 low pulse width counter register */ -#define HD64465_REG_PWM1HPC 0x16014 /* PWM 1 high pulse width counter register */ -#define HD64465_REG_PWM0CS 0x16018 /* PWM 0 clock scale register */ -#define HD64465_REG_PWM0LPC 0x1601A /* PWM 0 low pulse width counter register */ -#define HD64465_REG_PWM0HPC 0x1601C /* PWM 0 high pulse width counter register */ - -/* Analog/Digital Converter registers */ -#define HD64465_REG_ADDRA 0x1E000 /* A/D data register A */ -#define HD64465_REG_ADDRB 0x1E002 /* A/D data register B */ -#define HD64465_REG_ADDRC 0x1E004 /* A/D data register C */ -#define HD64465_REG_ADDRD 0x1E006 /* A/D data register D */ -#define HD64465_REG_ADCSR 0x1E008 /* A/D control/status register */ -#define HD64465_ADCSR_ADF 0x80 /* A/D End Flag */ -#define HD64465_ADCSR_ADST 0x40 /* A/D Start Flag */ -#define HD64465_ADCSR_ADIS 0x20 /* A/D Interrupt Status */ -#define HD64465_ADCSR_TRGE 0x10 /* A/D Trigger Enable */ -#define HD64465_ADCSR_ADIE 0x08 /* A/D Interrupt Enable */ -#define HD64465_ADCSR_SCAN 0x04 /* A/D Scan Mode */ -#define HD64465_ADCSR_CH_MASK 0x03 /* A/D Channel */ -#define HD64465_REG_ADCALCR 0x1E00A /* A/D calibration sample control */ -#define HD64465_REG_ADCAL 0x1E00C /* A/D calibration data register */ - - -/* General Purpose I/O ports registers */ -#define HD64465_REG_GPACR 0x14000 /* Port A Control Register */ -#define HD64465_REG_GPBCR 0x14002 /* Port B Control Register */ -#define HD64465_REG_GPCCR 0x14004 /* Port C Control Register */ -#define HD64465_REG_GPDCR 0x14006 /* Port D Control Register */ -#define HD64465_REG_GPECR 0x14008 /* Port E Control Register */ -#define HD64465_REG_GPADR 0x14010 /* Port A Data Register */ -#define HD64465_REG_GPBDR 0x14012 /* Port B Data Register */ -#define HD64465_REG_GPCDR 0x14014 /* Port C Data Register */ -#define HD64465_REG_GPDDR 0x14016 /* Port D Data Register */ -#define HD64465_REG_GPEDR 0x14018 /* Port E Data Register */ -#define HD64465_REG_GPAICR 0x14020 /* Port A Interrupt Control Register */ -#define HD64465_REG_GPBICR 0x14022 /* Port B Interrupt Control Register */ -#define HD64465_REG_GPCICR 0x14024 /* Port C Interrupt Control Register */ -#define HD64465_REG_GPDICR 0x14026 /* Port D Interrupt Control Register */ -#define HD64465_REG_GPEICR 0x14028 /* Port E Interrupt Control Register */ -#define HD64465_REG_GPAISR 0x14040 /* Port A Interrupt Status Register */ -#define HD64465_REG_GPBISR 0x14042 /* Port B Interrupt Status Register */ -#define HD64465_REG_GPCISR 0x14044 /* Port C Interrupt Status Register */ -#define HD64465_REG_GPDISR 0x14046 /* Port D Interrupt Status Register */ -#define HD64465_REG_GPEISR 0x14048 /* Port E Interrupt Status Register */ - -/* PCMCIA bridge interface */ -#define HD64465_REG_PCC0ISR 0x12000 /* socket 0 interface status */ -#define HD64465_PCCISR_PREADY 0x80 /* mem card ready / io card IREQ */ -#define HD64465_PCCISR_PIREQ 0x80 -#define HD64465_PCCISR_PMWP 0x40 /* mem card write-protected */ -#define HD64465_PCCISR_PVS2 0x20 /* voltage select pin 2 */ -#define HD64465_PCCISR_PVS1 0x10 /* voltage select pin 1 */ -#define HD64465_PCCISR_PCD_MASK 0x0c /* card detect */ -#define HD64465_PCCISR_PBVD_MASK 0x03 /* battery voltage */ -#define HD64465_PCCISR_PBVD_BATGOOD 0x03 /* battery good */ -#define HD64465_PCCISR_PBVD_BATWARN 0x01 /* battery low warning */ -#define HD64465_PCCISR_PBVD_BATDEAD1 0x02 /* battery dead */ -#define HD64465_PCCISR_PBVD_BATDEAD2 0x00 /* battery dead */ -#define HD64465_REG_PCC0GCR 0x12002 /* socket 0 general control */ -#define HD64465_PCCGCR_PDRV 0x80 /* output drive */ -#define HD64465_PCCGCR_PCCR 0x40 /* PC card reset */ -#define HD64465_PCCGCR_PCCT 0x20 /* PC card type, 1=IO&mem, 0=mem */ -#define HD64465_PCCGCR_PVCC0 0x10 /* voltage control pin VCC0SEL0 */ -#define HD64465_PCCGCR_PMMOD 0x08 /* memory mode */ -#define HD64465_PCCGCR_PPA25 0x04 /* pin A25 */ -#define HD64465_PCCGCR_PPA24 0x02 /* pin A24 */ -#define HD64465_PCCGCR_PREG 0x01 /* ping PCC0REG# */ -#define HD64465_REG_PCC0CSCR 0x12004 /* socket 0 card status change */ -#define HD64465_PCCCSCR_PSCDI 0x80 /* sw card detect intr */ -#define HD64465_PCCCSCR_PSWSEL 0x40 /* power select */ -#define HD64465_PCCCSCR_PIREQ 0x20 /* IREQ intr req */ -#define HD64465_PCCCSCR_PSC 0x10 /* STSCHG (status change) pin */ -#define HD64465_PCCCSCR_PCDC 0x08 /* CD (card detect) change */ -#define HD64465_PCCCSCR_PRC 0x04 /* ready change */ -#define HD64465_PCCCSCR_PBW 0x02 /* battery warning change */ -#define HD64465_PCCCSCR_PBD 0x01 /* battery dead change */ -#define HD64465_REG_PCC0CSCIER 0x12006 /* socket 0 card status change interrupt enable */ -#define HD64465_PCCCSCIER_PCRE 0x80 /* change reset enable */ -#define HD64465_PCCCSCIER_PIREQE_MASK 0x60 /* IREQ enable */ -#define HD64465_PCCCSCIER_PIREQE_DISABLED 0x00 /* IREQ disabled */ -#define HD64465_PCCCSCIER_PIREQE_LEVEL 0x20 /* IREQ level-triggered */ -#define HD64465_PCCCSCIER_PIREQE_FALLING 0x40 /* IREQ falling-edge-trig */ -#define HD64465_PCCCSCIER_PIREQE_RISING 0x60 /* IREQ rising-edge-trig */ -#define HD64465_PCCCSCIER_PSCE 0x10 /* status change enable */ -#define HD64465_PCCCSCIER_PCDE 0x08 /* card detect change enable */ -#define HD64465_PCCCSCIER_PRE 0x04 /* ready change enable */ -#define HD64465_PCCCSCIER_PBWE 0x02 /* battery warn change enable */ -#define HD64465_PCCCSCIER_PBDE 0x01 /* battery dead change enable*/ -#define HD64465_REG_PCC0SCR 0x12008 /* socket 0 software control */ -#define HD64465_PCCSCR_SHDN 0x10 /* TPS2206 SHutDowN pin */ -#define HD64465_PCCSCR_SWP 0x01 /* write protect */ -#define HD64465_REG_PCCPSR 0x1200A /* serial power switch control */ -#define HD64465_REG_PCC1ISR 0x12010 /* socket 1 interface status */ -#define HD64465_REG_PCC1GCR 0x12012 /* socket 1 general control */ -#define HD64465_REG_PCC1CSCR 0x12014 /* socket 1 card status change */ -#define HD64465_REG_PCC1CSCIER 0x12016 /* socket 1 card status change interrupt enable */ -#define HD64465_REG_PCC1SCR 0x12018 /* socket 1 software control */ - - -/* PS/2 Keyboard and mouse controller -- *not* register compatible */ -#define HD64465_REG_KBCSR 0x1dc00 /* Keyboard Control/Status reg */ -#define HD64465_KBCSR_KBCIE 0x8000 /* KBCK Input Enable */ -#define HD64465_KBCSR_KBCOE 0x4000 /* KBCK Output Enable */ -#define HD64465_KBCSR_KBDOE 0x2000 /* KB DATA Output Enable */ -#define HD64465_KBCSR_KBCD 0x1000 /* KBCK Driven */ -#define HD64465_KBCSR_KBDD 0x0800 /* KB DATA Driven */ -#define HD64465_KBCSR_KBCS 0x0400 /* KBCK pin Status */ -#define HD64465_KBCSR_KBDS 0x0200 /* KB DATA pin Status */ -#define HD64465_KBCSR_KBDP 0x0100 /* KB DATA Parity bit */ -#define HD64465_KBCSR_KBD_MASK 0x00ff /* KD DATA shift reg */ -#define HD64465_REG_KBISR 0x1dc04 /* Keyboard Interrupt Status reg */ -#define HD64465_KBISR_KBRDF 0x0001 /* KB Received Data Full */ -#define HD64465_REG_MSCSR 0x1dc10 /* Mouse Control/Status reg */ -#define HD64465_REG_MSISR 0x1dc14 /* Mouse Interrupt Status reg */ - - -/* - * Logical address at which the HD64465 is mapped. Note that this - * should always be in the P2 segment (uncached and untranslated). - */ -#ifndef CONFIG_HD64465_IOBASE -#define CONFIG_HD64465_IOBASE 0xb0000000 -#endif -/* - * The HD64465 multiplexes all its modules' interrupts onto - * this single interrupt. - */ -#ifndef CONFIG_HD64465_IRQ -#define CONFIG_HD64465_IRQ 5 -#endif - - -#define _HD64465_IO_MASK 0xf8000000 -#define is_hd64465_addr(addr) \ - ((addr & _HD64465_IO_MASK) == (CONFIG_HD64465_IOBASE & _HD64465_IO_MASK)) - -/* - * A range of 16 virtual interrupts generated by - * demuxing the HD64465 muxed interrupt. - */ -#define HD64465_IRQ_BASE OFFCHIP_IRQ_BASE -#define HD64465_IRQ_NUM 16 -#define HD64465_IRQ_ADC (HD64465_IRQ_BASE+0) -#define HD64465_IRQ_USB (HD64465_IRQ_BASE+1) -#define HD64465_IRQ_SCDI (HD64465_IRQ_BASE+2) -#define HD64465_IRQ_PARALLEL (HD64465_IRQ_BASE+3) -/* bit 4 is reserved */ -#define HD64465_IRQ_UART (HD64465_IRQ_BASE+5) -#define HD64465_IRQ_IRDA (HD64465_IRQ_BASE+6) -#define HD64465_IRQ_PS2MOUSE (HD64465_IRQ_BASE+7) -#define HD64465_IRQ_KBC (HD64465_IRQ_BASE+8) -#define HD64465_IRQ_TIMER1 (HD64465_IRQ_BASE+9) -#define HD64465_IRQ_TIMER0 (HD64465_IRQ_BASE+10) -#define HD64465_IRQ_GPIO (HD64465_IRQ_BASE+11) -#define HD64465_IRQ_AFE (HD64465_IRQ_BASE+12) -#define HD64465_IRQ_PCMCIA1 (HD64465_IRQ_BASE+13) -#define HD64465_IRQ_PCMCIA0 (HD64465_IRQ_BASE+14) -#define HD64465_IRQ_PS2KBD (HD64465_IRQ_BASE+15) - -/* Constants for PCMCIA mappings */ -#define HD64465_PCC_WINDOW 0x01000000 - -#define HD64465_PCC0_BASE 0xb8000000 /* area 6 */ -#define HD64465_PCC0_ATTR (HD64465_PCC0_BASE) -#define HD64465_PCC0_COMM (HD64465_PCC0_BASE+HD64465_PCC_WINDOW) -#define HD64465_PCC0_IO (HD64465_PCC0_BASE+2*HD64465_PCC_WINDOW) - -#define HD64465_PCC1_BASE 0xb4000000 /* area 5 */ -#define HD64465_PCC1_ATTR (HD64465_PCC1_BASE) -#define HD64465_PCC1_COMM (HD64465_PCC1_BASE+HD64465_PCC_WINDOW) -#define HD64465_PCC1_IO (HD64465_PCC1_BASE+2*HD64465_PCC_WINDOW) - -/* - * Base of USB controller interface (as memory) - */ -#define HD64465_USB_BASE (CONFIG_HD64465_IOBASE+0xb000) -#define HD64465_USB_LEN 0x1000 -/* - * Base of embedded SRAM, used for USB controller. - */ -#define HD64465_SRAM_BASE (CONFIG_HD64465_IOBASE+0x9000) -#define HD64465_SRAM_LEN 0x1000 - - - -#endif /* _ASM_SH_HD64465_ */ diff --git a/include/asm-sh/hd64465/io.h b/include/asm-sh/hd64465/io.h deleted file mode 100644 index 139f1472e5b..00000000000 --- a/include/asm-sh/hd64465/io.h +++ /dev/null @@ -1,44 +0,0 @@ -/* - * include/asm-sh/hd64465/io.h - * - * By Greg Banks - * (c) 2000 PocketPenguins Inc. - * - * Derived from io_hd64461.h, which bore the message: - * Copyright 2000 Stuart Menefy (stuart.menefy@st.com) - * - * May be copied or modified under the terms of the GNU General Public - * License. See linux/COPYING for more information. - * - * IO functions for an HD64465 "Windows CE Intelligent Peripheral Controller". - */ - -#ifndef _ASM_SH_IO_HD64465_H -#define _ASM_SH_IO_HD64465_H - -extern unsigned char hd64465_inb(unsigned long port); -extern unsigned short hd64465_inw(unsigned long port); -extern unsigned int hd64465_inl(unsigned long port); - -extern void hd64465_outb(unsigned char value, unsigned long port); -extern void hd64465_outw(unsigned short value, unsigned long port); -extern void hd64465_outl(unsigned int value, unsigned long port); - -extern unsigned char hd64465_inb_p(unsigned long port); -extern void hd64465_outb_p(unsigned char value, unsigned long port); - -extern unsigned long hd64465_isa_port2addr(unsigned long offset); -extern int hd64465_irq_demux(int irq); -/* Provision for generic secondary demux step -- used by PCMCIA code */ -extern void hd64465_register_irq_demux(int irq, - int (*demux)(int irq, void *dev), void *dev); -extern void hd64465_unregister_irq_demux(int irq); -/* Set this variable to 1 to see port traffic */ -extern int hd64465_io_debug; -/* Map a range of ports to a range of kernel virtual memory. - */ -extern void hd64465_port_map(unsigned short baseport, unsigned int nports, - unsigned long addr, unsigned char shift); -extern void hd64465_port_unmap(unsigned short baseport, unsigned int nports); - -#endif /* _ASM_SH_IO_HD64465_H */ diff --git a/include/asm-sh/heartbeat.h b/include/asm-sh/heartbeat.h deleted file mode 100644 index 724a43ed245..00000000000 --- a/include/asm-sh/heartbeat.h +++ /dev/null @@ -1,17 +0,0 @@ -#ifndef __ASM_SH_HEARTBEAT_H -#define __ASM_SH_HEARTBEAT_H - -#include - -#define HEARTBEAT_INVERTED (1 << 0) - -struct heartbeat_data { - void __iomem *base; - unsigned char *bit_pos; - unsigned int nr_bits; - struct timer_list timer; - unsigned int regsize; - unsigned long flags; -}; - -#endif /* __ASM_SH_HEARTBEAT_H */ diff --git a/include/asm-sh/hp6xx.h b/include/asm-sh/hp6xx.h deleted file mode 100644 index 0d4165a32dc..00000000000 --- a/include/asm-sh/hp6xx.h +++ /dev/null @@ -1,58 +0,0 @@ -#ifndef __ASM_SH_HP6XX_H -#define __ASM_SH_HP6XX_H - -/* - * Copyright (C) 2003, 2004, 2005 Andriy Skulysh - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - */ - -#define HP680_BTN_IRQ 32 /* IRQ0_IRQ */ -#define HP680_TS_IRQ 35 /* IRQ3_IRQ */ -#define HP680_HD64461_IRQ 36 /* IRQ4_IRQ */ - -#define DAC_LCD_BRIGHTNESS 0 -#define DAC_SPEAKER_VOLUME 1 - -#define PGDR_OPENED 0x01 -#define PGDR_MAIN_BATTERY_OUT 0x04 -#define PGDR_PLAY_BUTTON 0x08 -#define PGDR_REWIND_BUTTON 0x10 -#define PGDR_RECORD_BUTTON 0x20 - -#define PHDR_TS_PEN_DOWN 0x08 - -#define PJDR_LED_BLINK 0x02 - -#define PKDR_LED_GREEN 0x10 - -#define SCPDR_TS_SCAN_ENABLE 0x20 -#define SCPDR_TS_SCAN_Y 0x02 -#define SCPDR_TS_SCAN_X 0x01 - -#define SCPCR_TS_ENABLE 0x405 -#define SCPCR_TS_MASK 0xc0f - -#define ADC_CHANNEL_TS_Y 1 -#define ADC_CHANNEL_TS_X 2 -#define ADC_CHANNEL_BATTERY 3 -#define ADC_CHANNEL_BACKUP 4 -#define ADC_CHANNEL_CHARGE 5 - -#define HD64461_GPADR_SPEAKER 0x01 -#define HD64461_GPADR_PCMCIA0 (0x02|0x08) - -#define HD64461_GPBDR_LCDOFF 0x01 -#define HD64461_GPBDR_LCD_CONTRAST_MASK 0x78 -#define HD64461_GPBDR_LED_RED 0x80 - -#include -#include - -#define PJDR 0xa4000130 -#define PKDR 0xa4000132 - -#endif /* __ASM_SH_HP6XX_H */ diff --git a/include/asm-sh/hugetlb.h b/include/asm-sh/hugetlb.h deleted file mode 100644 index 967068fb79a..00000000000 --- a/include/asm-sh/hugetlb.h +++ /dev/null @@ -1,92 +0,0 @@ -#ifndef _ASM_SH_HUGETLB_H -#define _ASM_SH_HUGETLB_H - -#include - - -static inline int is_hugepage_only_range(struct mm_struct *mm, - unsigned long addr, - unsigned long len) { - return 0; -} - -/* - * If the arch doesn't supply something else, assume that hugepage - * size aligned regions are ok without further preparation. - */ -static inline int prepare_hugepage_range(struct file *file, - unsigned long addr, unsigned long len) -{ - if (len & ~HPAGE_MASK) - return -EINVAL; - if (addr & ~HPAGE_MASK) - return -EINVAL; - return 0; -} - -static inline void hugetlb_prefault_arch_hook(struct mm_struct *mm) { -} - -static inline void hugetlb_free_pgd_range(struct mmu_gather *tlb, - unsigned long addr, unsigned long end, - unsigned long floor, - unsigned long ceiling) -{ - free_pgd_range(tlb, addr, end, floor, ceiling); -} - -static inline void set_huge_pte_at(struct mm_struct *mm, unsigned long addr, - pte_t *ptep, pte_t pte) -{ - set_pte_at(mm, addr, ptep, pte); -} - -static inline pte_t huge_ptep_get_and_clear(struct mm_struct *mm, - unsigned long addr, pte_t *ptep) -{ - return ptep_get_and_clear(mm, addr, ptep); -} - -static inline void huge_ptep_clear_flush(struct vm_area_struct *vma, - unsigned long addr, pte_t *ptep) -{ -} - -static inline int huge_pte_none(pte_t pte) -{ - return pte_none(pte); -} - -static inline pte_t huge_pte_wrprotect(pte_t pte) -{ - return pte_wrprotect(pte); -} - -static inline void huge_ptep_set_wrprotect(struct mm_struct *mm, - unsigned long addr, pte_t *ptep) -{ - ptep_set_wrprotect(mm, addr, ptep); -} - -static inline int huge_ptep_set_access_flags(struct vm_area_struct *vma, - unsigned long addr, pte_t *ptep, - pte_t pte, int dirty) -{ - return ptep_set_access_flags(vma, addr, ptep, pte, dirty); -} - -static inline pte_t huge_ptep_get(pte_t *ptep) -{ - return *ptep; -} - -static inline int arch_prepare_hugepage(struct page *page) -{ - return 0; -} - -static inline void arch_release_hugepage(struct page *page) -{ -} - -#endif /* _ASM_SH_HUGETLB_H */ diff --git a/include/asm-sh/hw_irq.h b/include/asm-sh/hw_irq.h deleted file mode 100644 index d557b00111b..00000000000 --- a/include/asm-sh/hw_irq.h +++ /dev/null @@ -1,123 +0,0 @@ -#ifndef __ASM_SH_HW_IRQ_H -#define __ASM_SH_HW_IRQ_H - -#include -#include - -extern atomic_t irq_err_count; - -struct ipr_data { - unsigned char irq; - unsigned char ipr_idx; /* Index for the IPR registered */ - unsigned char shift; /* Number of bits to shift the data */ - unsigned char priority; /* The priority */ -}; - -struct ipr_desc { - unsigned long *ipr_offsets; - unsigned int nr_offsets; - struct ipr_data *ipr_data; - unsigned int nr_irqs; - struct irq_chip chip; -}; - -void register_ipr_controller(struct ipr_desc *); - -typedef unsigned char intc_enum; - -struct intc_vect { - intc_enum enum_id; - unsigned short vect; -}; - -#define INTC_VECT(enum_id, vect) { enum_id, vect } -#define INTC_IRQ(enum_id, irq) INTC_VECT(enum_id, irq2evt(irq)) - -struct intc_group { - intc_enum enum_id; - intc_enum enum_ids[32]; -}; - -#define INTC_GROUP(enum_id, ids...) { enum_id, { ids } } - -struct intc_mask_reg { - unsigned long set_reg, clr_reg, reg_width; - intc_enum enum_ids[32]; -#ifdef CONFIG_SMP - unsigned long smp; -#endif -}; - -struct intc_prio_reg { - unsigned long set_reg, clr_reg, reg_width, field_width; - intc_enum enum_ids[16]; -#ifdef CONFIG_SMP - unsigned long smp; -#endif -}; - -struct intc_sense_reg { - unsigned long reg, reg_width, field_width; - intc_enum enum_ids[16]; -}; - -#ifdef CONFIG_SMP -#define INTC_SMP(stride, nr) .smp = (stride) | ((nr) << 8) -#else -#define INTC_SMP(stride, nr) -#endif - -struct intc_desc { - struct intc_vect *vectors; - unsigned int nr_vectors; - struct intc_group *groups; - unsigned int nr_groups; - struct intc_mask_reg *mask_regs; - unsigned int nr_mask_regs; - struct intc_prio_reg *prio_regs; - unsigned int nr_prio_regs; - struct intc_sense_reg *sense_regs; - unsigned int nr_sense_regs; - char *name; -#if defined(CONFIG_CPU_SH3) || defined(CONFIG_CPU_SH4A) - struct intc_mask_reg *ack_regs; - unsigned int nr_ack_regs; -#endif -}; - -#define _INTC_ARRAY(a) a, sizeof(a)/sizeof(*a) -#define DECLARE_INTC_DESC(symbol, chipname, vectors, groups, \ - mask_regs, prio_regs, sense_regs) \ -struct intc_desc symbol __initdata = { \ - _INTC_ARRAY(vectors), _INTC_ARRAY(groups), \ - _INTC_ARRAY(mask_regs), _INTC_ARRAY(prio_regs), \ - _INTC_ARRAY(sense_regs), \ - chipname, \ -} - -#if defined(CONFIG_CPU_SH3) || defined(CONFIG_CPU_SH4A) -#define DECLARE_INTC_DESC_ACK(symbol, chipname, vectors, groups, \ - mask_regs, prio_regs, sense_regs, ack_regs) \ -struct intc_desc symbol __initdata = { \ - _INTC_ARRAY(vectors), _INTC_ARRAY(groups), \ - _INTC_ARRAY(mask_regs), _INTC_ARRAY(prio_regs), \ - _INTC_ARRAY(sense_regs), \ - chipname, \ - _INTC_ARRAY(ack_regs), \ -} -#endif - -void __init register_intc_controller(struct intc_desc *desc); -int intc_set_priority(unsigned int irq, unsigned int prio); - -void __init plat_irq_setup(void); -#ifdef CONFIG_CPU_SH3 -void __init plat_irq_setup_sh3(void); -#endif - -enum { IRQ_MODE_IRQ, IRQ_MODE_IRQ7654, IRQ_MODE_IRQ3210, - IRQ_MODE_IRL7654_MASK, IRQ_MODE_IRL3210_MASK, - IRQ_MODE_IRL7654, IRQ_MODE_IRL3210 }; -void __init plat_irq_setup_pins(int mode); - -#endif /* __ASM_SH_HW_IRQ_H */ diff --git a/include/asm-sh/i2c-sh7760.h b/include/asm-sh/i2c-sh7760.h deleted file mode 100644 index 24182116711..00000000000 --- a/include/asm-sh/i2c-sh7760.h +++ /dev/null @@ -1,22 +0,0 @@ -/* - * MMIO/IRQ and platform data for SH7760 I2C channels - */ - -#ifndef _I2C_SH7760_H_ -#define _I2C_SH7760_H_ - -#define SH7760_I2C_DEVNAME "sh7760-i2c" - -#define SH7760_I2C0_MMIO 0xFE140000 -#define SH7760_I2C0_MMIOEND 0xFE14003B -#define SH7760_I2C0_IRQ 62 - -#define SH7760_I2C1_MMIO 0xFE150000 -#define SH7760_I2C1_MMIOEND 0xFE15003B -#define SH7760_I2C1_IRQ 63 - -struct sh7760_i2c_platdata { - unsigned int speed_khz; -}; - -#endif diff --git a/include/asm-sh/ilsel.h b/include/asm-sh/ilsel.h deleted file mode 100644 index e3d304b280f..00000000000 --- a/include/asm-sh/ilsel.h +++ /dev/null @@ -1,45 +0,0 @@ -#ifndef __ASM_SH_ILSEL_H -#define __ASM_SH_ILSEL_H - -typedef enum { - ILSEL_NONE, - ILSEL_LAN, - ILSEL_USBH_I, - ILSEL_USBH_S, - ILSEL_USBH_V, - ILSEL_RTC, - ILSEL_USBP_I, - ILSEL_USBP_S, - ILSEL_USBP_V, - ILSEL_KEY, - - /* - * ILSEL Aliases - corner cases for interleaved level tables. - * - * Someone thought this was a good idea and less hassle than - * demuxing a shared vector, really. - */ - - /* ILSEL0 and 2 */ - ILSEL_FPGA0, - ILSEL_FPGA1, - ILSEL_EX1, - ILSEL_EX2, - ILSEL_EX3, - ILSEL_EX4, - - /* ILSEL1 and 3 */ - ILSEL_FPGA2 = ILSEL_FPGA0, - ILSEL_FPGA3 = ILSEL_FPGA1, - ILSEL_EX5 = ILSEL_EX1, - ILSEL_EX6 = ILSEL_EX2, - ILSEL_EX7 = ILSEL_EX3, - ILSEL_EX8 = ILSEL_EX4, -} ilsel_source_t; - -/* arch/sh/boards/renesas/x3proto/ilsel.c */ -int ilsel_enable(ilsel_source_t set); -int ilsel_enable_fixed(ilsel_source_t set, unsigned int level); -void ilsel_disable(unsigned int irq); - -#endif /* __ASM_SH_ILSEL_H */ diff --git a/include/asm-sh/io.h b/include/asm-sh/io.h deleted file mode 100644 index a4fbf0c84fb..00000000000 --- a/include/asm-sh/io.h +++ /dev/null @@ -1,366 +0,0 @@ -#ifndef __ASM_SH_IO_H -#define __ASM_SH_IO_H - -/* - * Convention: - * read{b,w,l}/write{b,w,l} are for PCI, - * while in{b,w,l}/out{b,w,l} are for ISA - * These may (will) be platform specific function. - * In addition we have 'pausing' versions: in{b,w,l}_p/out{b,w,l}_p - * and 'string' versions: ins{b,w,l}/outs{b,w,l} - * For read{b,w,l} and write{b,w,l} there are also __raw versions, which - * do not have a memory barrier after them. - * - * In addition, we have - * ctrl_in{b,w,l}/ctrl_out{b,w,l} for SuperH specific I/O. - * which are processor specific. - */ - -/* - * We follow the Alpha convention here: - * __inb expands to an inline function call (which calls via the mv) - * _inb is a real function call (note ___raw fns are _ version of __raw) - * inb by default expands to _inb, but the machine specific code may - * define it to __inb if it chooses. - */ -#include -#include -#include -#include -#include -#include - -#ifdef __KERNEL__ - -/* - * Depending on which platform we are running on, we need different - * I/O functions. - */ -#define __IO_PREFIX generic -#include -#include - -#define maybebadio(port) \ - printk(KERN_ERR "bad PC-like io %s:%u for port 0x%lx at 0x%08x\n", \ - __FUNCTION__, __LINE__, (port), (u32)__builtin_return_address(0)) - -/* - * Since boards are able to define their own set of I/O routines through - * their respective machine vector, we always wrap through the mv. - * - * Also, in the event that a board hasn't provided its own definition for - * a given routine, it will be wrapped to generic code at run-time. - */ - -#define __inb(p) sh_mv.mv_inb((p)) -#define __inw(p) sh_mv.mv_inw((p)) -#define __inl(p) sh_mv.mv_inl((p)) -#define __outb(x,p) sh_mv.mv_outb((x),(p)) -#define __outw(x,p) sh_mv.mv_outw((x),(p)) -#define __outl(x,p) sh_mv.mv_outl((x),(p)) - -#define __inb_p(p) sh_mv.mv_inb_p((p)) -#define __inw_p(p) sh_mv.mv_inw_p((p)) -#define __inl_p(p) sh_mv.mv_inl_p((p)) -#define __outb_p(x,p) sh_mv.mv_outb_p((x),(p)) -#define __outw_p(x,p) sh_mv.mv_outw_p((x),(p)) -#define __outl_p(x,p) sh_mv.mv_outl_p((x),(p)) - -#define __insb(p,b,c) sh_mv.mv_insb((p), (b), (c)) -#define __insw(p,b,c) sh_mv.mv_insw((p), (b), (c)) -#define __insl(p,b,c) sh_mv.mv_insl((p), (b), (c)) -#define __outsb(p,b,c) sh_mv.mv_outsb((p), (b), (c)) -#define __outsw(p,b,c) sh_mv.mv_outsw((p), (b), (c)) -#define __outsl(p,b,c) sh_mv.mv_outsl((p), (b), (c)) - -#define __readb(a) sh_mv.mv_readb((a)) -#define __readw(a) sh_mv.mv_readw((a)) -#define __readl(a) sh_mv.mv_readl((a)) -#define __writeb(v,a) sh_mv.mv_writeb((v),(a)) -#define __writew(v,a) sh_mv.mv_writew((v),(a)) -#define __writel(v,a) sh_mv.mv_writel((v),(a)) - -#define inb __inb -#define inw __inw -#define inl __inl -#define outb __outb -#define outw __outw -#define outl __outl - -#define inb_p __inb_p -#define inw_p __inw_p -#define inl_p __inl_p -#define outb_p __outb_p -#define outw_p __outw_p -#define outl_p __outl_p - -#define insb __insb -#define insw __insw -#define insl __insl -#define outsb __outsb -#define outsw __outsw -#define outsl __outsl - -#define __raw_readb(a) __readb((void __iomem *)(a)) -#define __raw_readw(a) __readw((void __iomem *)(a)) -#define __raw_readl(a) __readl((void __iomem *)(a)) -#define __raw_writeb(v, a) __writeb(v, (void __iomem *)(a)) -#define __raw_writew(v, a) __writew(v, (void __iomem *)(a)) -#define __raw_writel(v, a) __writel(v, (void __iomem *)(a)) - -void __raw_writesl(unsigned long addr, const void *data, int longlen); -void __raw_readsl(unsigned long addr, void *data, int longlen); - -/* - * The platform header files may define some of these macros to use - * the inlined versions where appropriate. These macros may also be - * redefined by userlevel programs. - */ -#ifdef __readb -# define readb(a) ({ unsigned int r_ = __raw_readb(a); mb(); r_; }) -#endif -#ifdef __raw_readw -# define readw(a) ({ unsigned int r_ = __raw_readw(a); mb(); r_; }) -#endif -#ifdef __raw_readl -# define readl(a) ({ unsigned int r_ = __raw_readl(a); mb(); r_; }) -#endif - -#ifdef __raw_writeb -# define writeb(v,a) ({ __raw_writeb((v),(a)); mb(); }) -#endif -#ifdef __raw_writew -# define writew(v,a) ({ __raw_writew((v),(a)); mb(); }) -#endif -#ifdef __raw_writel -# define writel(v,a) ({ __raw_writel((v),(a)); mb(); }) -#endif - -#define __BUILD_MEMORY_STRING(bwlq, type) \ - \ -static inline void writes##bwlq(volatile void __iomem *mem, \ - const void *addr, unsigned int count) \ -{ \ - const volatile type *__addr = addr; \ - \ - while (count--) { \ - __raw_write##bwlq(*__addr, mem); \ - __addr++; \ - } \ -} \ - \ -static inline void reads##bwlq(volatile void __iomem *mem, void *addr, \ - unsigned int count) \ -{ \ - volatile type *__addr = addr; \ - \ - while (count--) { \ - *__addr = __raw_read##bwlq(mem); \ - __addr++; \ - } \ -} - -__BUILD_MEMORY_STRING(b, u8) -__BUILD_MEMORY_STRING(w, u16) -#define writesl __raw_writesl -#define readsl __raw_readsl - -#define readb_relaxed(a) readb(a) -#define readw_relaxed(a) readw(a) -#define readl_relaxed(a) readl(a) - -/* Simple MMIO */ -#define ioread8(a) readb(a) -#define ioread16(a) readw(a) -#define ioread16be(a) be16_to_cpu(__raw_readw((a))) -#define ioread32(a) readl(a) -#define ioread32be(a) be32_to_cpu(__raw_readl((a))) - -#define iowrite8(v,a) writeb((v),(a)) -#define iowrite16(v,a) writew((v),(a)) -#define iowrite16be(v,a) __raw_writew(cpu_to_be16((v)),(a)) -#define iowrite32(v,a) writel((v),(a)) -#define iowrite32be(v,a) __raw_writel(cpu_to_be32((v)),(a)) - -#define ioread8_rep(a, d, c) readsb((a), (d), (c)) -#define ioread16_rep(a, d, c) readsw((a), (d), (c)) -#define ioread32_rep(a, d, c) readsl((a), (d), (c)) - -#define iowrite8_rep(a, s, c) writesb((a), (s), (c)) -#define iowrite16_rep(a, s, c) writesw((a), (s), (c)) -#define iowrite32_rep(a, s, c) writesl((a), (s), (c)) - -#define mmiowb() wmb() /* synco on SH-4A, otherwise a nop */ - -#define IO_SPACE_LIMIT 0xffffffff - -/* - * This function provides a method for the generic case where a board-specific - * ioport_map simply needs to return the port + some arbitrary port base. - * - * We use this at board setup time to implicitly set the port base, and - * as a result, we can use the generic ioport_map. - */ -static inline void __set_io_port_base(unsigned long pbase) -{ - extern unsigned long generic_io_base; - - generic_io_base = pbase; -} - -#define __ioport_map(p, n) sh_mv.mv_ioport_map((p), (n)) - -/* We really want to try and get these to memcpy etc */ -extern void memcpy_fromio(void *, volatile void __iomem *, unsigned long); -extern void memcpy_toio(volatile void __iomem *, const void *, unsigned long); -extern void memset_io(volatile void __iomem *, int, unsigned long); - -/* SuperH on-chip I/O functions */ -static inline unsigned char ctrl_inb(unsigned long addr) -{ - return *(volatile unsigned char*)addr; -} - -static inline unsigned short ctrl_inw(unsigned long addr) -{ - return *(volatile unsigned short*)addr; -} - -static inline unsigned int ctrl_inl(unsigned long addr) -{ - return *(volatile unsigned long*)addr; -} - -static inline unsigned long long ctrl_inq(unsigned long addr) -{ - return *(volatile unsigned long long*)addr; -} - -static inline void ctrl_outb(unsigned char b, unsigned long addr) -{ - *(volatile unsigned char*)addr = b; -} - -static inline void ctrl_outw(unsigned short b, unsigned long addr) -{ - *(volatile unsigned short*)addr = b; -} - -static inline void ctrl_outl(unsigned int b, unsigned long addr) -{ - *(volatile unsigned long*)addr = b; -} - -static inline void ctrl_outq(unsigned long long b, unsigned long addr) -{ - *(volatile unsigned long long*)addr = b; -} - -static inline void ctrl_delay(void) -{ -#ifdef P2SEG - ctrl_inw(P2SEG); -#endif -} - -/* Quad-word real-mode I/O, don't ask.. */ -unsigned long long peek_real_address_q(unsigned long long addr); -unsigned long long poke_real_address_q(unsigned long long addr, - unsigned long long val); - -#if !defined(CONFIG_MMU) -#define virt_to_phys(address) ((unsigned long)(address)) -#define phys_to_virt(address) ((void *)(address)) -#else -#define virt_to_phys(address) (__pa(address)) -#define phys_to_virt(address) (__va(address)) -#endif - -/* - * On 32-bit SH, we traditionally have the whole physical address space - * mapped at all times (as MIPS does), so "ioremap()" and "iounmap()" do - * not need to do anything but place the address in the proper segment. - * This is true for P1 and P2 addresses, as well as some P3 ones. - * However, most of the P3 addresses and newer cores using extended - * addressing need to map through page tables, so the ioremap() - * implementation becomes a bit more complicated. - * - * See arch/sh/mm/ioremap.c for additional notes on this. - * - * We cheat a bit and always return uncachable areas until we've fixed - * the drivers to handle caching properly. - * - * On the SH-5 the concept of segmentation in the 1:1 PXSEG sense simply - * doesn't exist, so everything must go through page tables. - */ -#ifdef CONFIG_MMU -void __iomem *__ioremap(unsigned long offset, unsigned long size, - unsigned long flags); -void __iounmap(void __iomem *addr); - -/* arch/sh/mm/ioremap_64.c */ -unsigned long onchip_remap(unsigned long addr, unsigned long size, - const char *name); -extern void onchip_unmap(unsigned long vaddr); -#else -#define __ioremap(offset, size, flags) ((void __iomem *)(offset)) -#define __iounmap(addr) do { } while (0) -#define onchip_remap(addr, size, name) (addr) -#define onchip_unmap(addr) do { } while (0) -#endif /* CONFIG_MMU */ - -static inline void __iomem * -__ioremap_mode(unsigned long offset, unsigned long size, unsigned long flags) -{ -#ifdef CONFIG_SUPERH32 - unsigned long last_addr = offset + size - 1; -#endif - void __iomem *ret; - - ret = __ioremap_trapped(offset, size); - if (ret) - return ret; - -#ifdef CONFIG_SUPERH32 - /* - * For P1 and P2 space this is trivial, as everything is already - * mapped. Uncached access for P1 addresses are done through P2. - * In the P3 case or for addresses outside of the 29-bit space, - * mapping must be done by the PMB or by using page tables. - */ - if (likely(PXSEG(offset) < P3SEG && PXSEG(last_addr) < P3SEG)) { - if (unlikely(flags & _PAGE_CACHABLE)) - return (void __iomem *)P1SEGADDR(offset); - - return (void __iomem *)P2SEGADDR(offset); - } -#endif - - return __ioremap(offset, size, flags); -} - -#define ioremap(offset, size) \ - __ioremap_mode((offset), (size), 0) -#define ioremap_nocache(offset, size) \ - __ioremap_mode((offset), (size), 0) -#define ioremap_cache(offset, size) \ - __ioremap_mode((offset), (size), _PAGE_CACHABLE) -#define p3_ioremap(offset, size, flags) \ - __ioremap((offset), (size), (flags)) -#define iounmap(addr) \ - __iounmap((addr)) - -/* - * Convert a physical pointer to a virtual kernel pointer for /dev/mem - * access - */ -#define xlate_dev_mem_ptr(p) __va(p) - -/* - * Convert a virtual cached pointer to an uncached pointer - */ -#define xlate_dev_kmem_ptr(p) p - -#endif /* __KERNEL__ */ - -#endif /* __ASM_SH_IO_H */ diff --git a/include/asm-sh/io_generic.h b/include/asm-sh/io_generic.h deleted file mode 100644 index 92fc6070d7b..00000000000 --- a/include/asm-sh/io_generic.h +++ /dev/null @@ -1,49 +0,0 @@ -/* - * Trivial I/O routine definitions, intentionally meant to be included - * multiple times. Ugly I/O routine concatenation helpers taken from - * alpha. Must be included _before_ io.h to avoid preprocessor-induced - * routine mismatch. - */ -#define IO_CONCAT(a,b) _IO_CONCAT(a,b) -#define _IO_CONCAT(a,b) a ## _ ## b - -#ifndef __IO_PREFIX -#error "Don't include this header without a valid system prefix" -#endif - -u8 IO_CONCAT(__IO_PREFIX,inb)(unsigned long); -u16 IO_CONCAT(__IO_PREFIX,inw)(unsigned long); -u32 IO_CONCAT(__IO_PREFIX,inl)(unsigned long); - -void IO_CONCAT(__IO_PREFIX,outb)(u8, unsigned long); -void IO_CONCAT(__IO_PREFIX,outw)(u16, unsigned long); -void IO_CONCAT(__IO_PREFIX,outl)(u32, unsigned long); - -u8 IO_CONCAT(__IO_PREFIX,inb_p)(unsigned long); -u16 IO_CONCAT(__IO_PREFIX,inw_p)(unsigned long); -u32 IO_CONCAT(__IO_PREFIX,inl_p)(unsigned long); -void IO_CONCAT(__IO_PREFIX,outb_p)(u8, unsigned long); -void IO_CONCAT(__IO_PREFIX,outw_p)(u16, unsigned long); -void IO_CONCAT(__IO_PREFIX,outl_p)(u32, unsigned long); - -void IO_CONCAT(__IO_PREFIX,insb)(unsigned long, void *dst, unsigned long count); -void IO_CONCAT(__IO_PREFIX,insw)(unsigned long, void *dst, unsigned long count); -void IO_CONCAT(__IO_PREFIX,insl)(unsigned long, void *dst, unsigned long count); -void IO_CONCAT(__IO_PREFIX,outsb)(unsigned long, const void *src, unsigned long count); -void IO_CONCAT(__IO_PREFIX,outsw)(unsigned long, const void *src, unsigned long count); -void IO_CONCAT(__IO_PREFIX,outsl)(unsigned long, const void *src, unsigned long count); - -u8 IO_CONCAT(__IO_PREFIX,readb)(void __iomem *); -u16 IO_CONCAT(__IO_PREFIX,readw)(void __iomem *); -u32 IO_CONCAT(__IO_PREFIX,readl)(void __iomem *); -void IO_CONCAT(__IO_PREFIX,writeb)(u8, void __iomem *); -void IO_CONCAT(__IO_PREFIX,writew)(u16, void __iomem *); -void IO_CONCAT(__IO_PREFIX,writel)(u32, void __iomem *); - -void *IO_CONCAT(__IO_PREFIX,ioremap)(unsigned long offset, unsigned long size); -void IO_CONCAT(__IO_PREFIX,iounmap)(void *addr); - -void __iomem *IO_CONCAT(__IO_PREFIX,ioport_map)(unsigned long addr, unsigned int size); -void IO_CONCAT(__IO_PREFIX,ioport_unmap)(void __iomem *addr); - -#undef __IO_PREFIX diff --git a/include/asm-sh/io_trapped.h b/include/asm-sh/io_trapped.h deleted file mode 100644 index f1251d4f0ba..00000000000 --- a/include/asm-sh/io_trapped.h +++ /dev/null @@ -1,58 +0,0 @@ -#ifndef __ASM_SH_IO_TRAPPED_H -#define __ASM_SH_IO_TRAPPED_H - -#include -#include -#include - -#define IO_TRAPPED_MAGIC 0xfeedbeef - -struct trapped_io { - unsigned int magic; - struct resource *resource; - unsigned int num_resources; - unsigned int minimum_bus_width; - struct list_head list; - void __iomem *virt_base; -} __aligned(PAGE_SIZE); - -#ifdef CONFIG_IO_TRAPPED -int register_trapped_io(struct trapped_io *tiop); -int handle_trapped_io(struct pt_regs *regs, unsigned long address); - -void __iomem *match_trapped_io_handler(struct list_head *list, - unsigned long offset, - unsigned long size); - -#ifdef CONFIG_HAS_IOMEM -extern struct list_head trapped_mem; - -static inline void __iomem * -__ioremap_trapped(unsigned long offset, unsigned long size) -{ - return match_trapped_io_handler(&trapped_mem, offset, size); -} -#else -#define __ioremap_trapped(offset, size) NULL -#endif - -#ifdef CONFIG_HAS_IOPORT -extern struct list_head trapped_io; - -static inline void __iomem * -__ioport_map_trapped(unsigned long offset, unsigned long size) -{ - return match_trapped_io_handler(&trapped_io, offset, size); -} -#else -#define __ioport_map_trapped(offset, size) NULL -#endif - -#else -#define register_trapped_io(tiop) (-1) -#define handle_trapped_io(tiop, address) 0 -#define __ioremap_trapped(offset, size) NULL -#define __ioport_map_trapped(offset, size) NULL -#endif - -#endif /* __ASM_SH_IO_TRAPPED_H */ diff --git a/include/asm-sh/ioctl.h b/include/asm-sh/ioctl.h deleted file mode 100644 index b279fe06dfe..00000000000 --- a/include/asm-sh/ioctl.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/include/asm-sh/ioctls.h b/include/asm-sh/ioctls.h deleted file mode 100644 index c212c371a4a..00000000000 --- a/include/asm-sh/ioctls.h +++ /dev/null @@ -1,103 +0,0 @@ -#ifndef __ASM_SH_IOCTLS_H -#define __ASM_SH_IOCTLS_H - -#include - -#define FIOCLEX _IO('f', 1) -#define FIONCLEX _IO('f', 2) -#define FIOASYNC _IOW('f', 125, int) -#define FIONBIO _IOW('f', 126, int) -#define FIONREAD _IOR('f', 127, int) -#define TIOCINQ FIONREAD -#define FIOQSIZE _IOR('f', 128, loff_t) - -#define TCGETS 0x5401 -#define TCSETS 0x5402 -#define TCSETSW 0x5403 -#define TCSETSF 0x5404 - -#define TCGETA 0x80127417 /* _IOR('t', 23, struct termio) */ -#define TCSETA 0x40127418 /* _IOW('t', 24, struct termio) */ -#define TCSETAW 0x40127419 /* _IOW('t', 25, struct termio) */ -#define TCSETAF 0x4012741C /* _IOW('t', 28, struct termio) */ - -#define TCSBRK _IO('t', 29) -#define TCXONC _IO('t', 30) -#define TCFLSH _IO('t', 31) - -#define TIOCSWINSZ 0x40087467 /* _IOW('t', 103, struct winsize) */ -#define TIOCGWINSZ 0x80087468 /* _IOR('t', 104, struct winsize) */ -#define TIOCSTART _IO('t', 110) /* start output, like ^Q */ -#define TIOCSTOP _IO('t', 111) /* stop output, like ^S */ -#define TIOCOUTQ _IOR('t', 115, int) /* output queue size */ - -#define TIOCSPGRP _IOW('t', 118, int) -#define TIOCGPGRP _IOR('t', 119, int) - -#define TIOCEXCL _IO('T', 12) /* 0x540C */ -#define TIOCNXCL _IO('T', 13) /* 0x540D */ -#define TIOCSCTTY _IO('T', 14) /* 0x540E */ - -#define TIOCSTI _IOW('T', 18, char) /* 0x5412 */ -#define TIOCMGET _IOR('T', 21, unsigned int) /* 0x5415 */ -#define TIOCMBIS _IOW('T', 22, unsigned int) /* 0x5416 */ -#define TIOCMBIC _IOW('T', 23, unsigned int) /* 0x5417 */ -#define TIOCMSET _IOW('T', 24, unsigned int) /* 0x5418 */ -# define TIOCM_LE 0x001 -# define TIOCM_DTR 0x002 -# define TIOCM_RTS 0x004 -# define TIOCM_ST 0x008 -# define TIOCM_SR 0x010 -# define TIOCM_CTS 0x020 -# define TIOCM_CAR 0x040 -# define TIOCM_RNG 0x080 -# define TIOCM_DSR 0x100 -# define TIOCM_CD TIOCM_CAR -# define TIOCM_RI TIOCM_RNG - -#define TIOCGSOFTCAR _IOR('T', 25, unsigned int) /* 0x5419 */ -#define TIOCSSOFTCAR _IOW('T', 26, unsigned int) /* 0x541A */ -#define TIOCLINUX _IOW('T', 28, char) /* 0x541C */ -#define TIOCCONS _IO('T', 29) /* 0x541D */ -#define TIOCGSERIAL 0x803C541E /* _IOR('T', 30, struct serial_struct) 0x541E */ -#define TIOCSSERIAL 0x403C541F /* _IOW('T', 31, struct serial_struct) 0x541F */ -#define TIOCPKT _IOW('T', 32, int) /* 0x5420 */ -# define TIOCPKT_DATA 0 -# define TIOCPKT_FLUSHREAD 1 -# define TIOCPKT_FLUSHWRITE 2 -# define TIOCPKT_STOP 4 -# define TIOCPKT_START 8 -# define TIOCPKT_NOSTOP 16 -# define TIOCPKT_DOSTOP 32 - - -#define TIOCNOTTY _IO('T', 34) /* 0x5422 */ -#define TIOCSETD _IOW('T', 35, int) /* 0x5423 */ -#define TIOCGETD _IOR('T', 36, int) /* 0x5424 */ -#define TCSBRKP _IOW('T', 37, int) /* 0x5425 */ /* Needed for POSIX tcsendbreak() */ -#define TIOCSBRK _IO('T', 39) /* 0x5427 */ /* BSD compatibility */ -#define TIOCCBRK _IO('T', 40) /* 0x5428 */ /* BSD compatibility */ -#define TIOCGSID _IOR('T', 41, pid_t) /* 0x5429 */ /* Return the session ID of FD */ -#define TCGETS2 _IOR('T', 42, struct termios2) -#define TCSETS2 _IOW('T', 43, struct termios2) -#define TCSETSW2 _IOW('T', 44, struct termios2) -#define TCSETSF2 _IOW('T', 45, struct termios2) -#define TIOCGPTN _IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */ -#define TIOCSPTLCK _IOW('T',0x31, int) /* Lock/unlock Pty */ - -#define TIOCSERCONFIG _IO('T', 83) /* 0x5453 */ -#define TIOCSERGWILD _IOR('T', 84, int) /* 0x5454 */ -#define TIOCSERSWILD _IOW('T', 85, int) /* 0x5455 */ -#define TIOCGLCKTRMIOS 0x5456 -#define TIOCSLCKTRMIOS 0x5457 -#define TIOCSERGSTRUCT 0x80d85458 /* _IOR('T', 88, struct async_struct) 0x5458 */ /* For debugging only */ -#define TIOCSERGETLSR _IOR('T', 89, unsigned int) /* 0x5459 */ /* Get line status register */ - /* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */ -# define TIOCSER_TEMT 0x01 /* Transmitter physically empty */ -#define TIOCSERGETMULTI 0x80A8545A /* _IOR('T', 90, struct serial_multiport_struct) 0x545A */ /* Get multiport config */ -#define TIOCSERSETMULTI 0x40A8545B /* _IOW('T', 91, struct serial_multiport_struct) 0x545B */ /* Set multiport config */ - -#define TIOCMIWAIT _IO('T', 92) /* 0x545C */ /* wait for a change on serial input line(s) */ -#define TIOCGICOUNT 0x545D /* read serial port inline interrupt counts */ - -#endif /* __ASM_SH_IOCTLS_H */ diff --git a/include/asm-sh/ipcbuf.h b/include/asm-sh/ipcbuf.h deleted file mode 100644 index 5ffc9972a7e..00000000000 --- a/include/asm-sh/ipcbuf.h +++ /dev/null @@ -1,29 +0,0 @@ -#ifndef __ASM_SH_IPCBUF_H__ -#define __ASM_SH_IPCBUF_H__ - -/* - * The ipc64_perm structure for i386 architecture. - * Note extra padding because this structure is passed back and forth - * between kernel and user space. - * - * Pad space is left for: - * - 32-bit mode_t and seq - * - 2 miscellaneous 32-bit values - */ - -struct ipc64_perm -{ - __kernel_key_t key; - __kernel_uid32_t uid; - __kernel_gid32_t gid; - __kernel_uid32_t cuid; - __kernel_gid32_t cgid; - __kernel_mode_t mode; - unsigned short __pad1; - unsigned short seq; - unsigned short __pad2; - unsigned long __unused1; - unsigned long __unused2; -}; - -#endif /* __ASM_SH_IPCBUF_H__ */ diff --git a/include/asm-sh/irq.h b/include/asm-sh/irq.h deleted file mode 100644 index ca66e5df69d..00000000000 --- a/include/asm-sh/irq.h +++ /dev/null @@ -1,57 +0,0 @@ -#ifndef __ASM_SH_IRQ_H -#define __ASM_SH_IRQ_H - -#include - -/* - * A sane default based on a reasonable vector table size, platforms are - * advised to cap this at the hard limit that they're interested in - * through the machvec. - */ -#define NR_IRQS 256 - -/* - * Convert back and forth between INTEVT and IRQ values. - */ -#ifdef CONFIG_CPU_HAS_INTEVT -#define evt2irq(evt) (((evt) >> 5) - 16) -#define irq2evt(irq) (((irq) + 16) << 5) -#else -#define evt2irq(evt) (evt) -#define irq2evt(irq) (irq) -#endif - -/* - * Simple Mask Register Support - */ -extern void make_maskreg_irq(unsigned int irq); -extern unsigned short *irq_mask_register; - -/* - * PINT IRQs - */ -void init_IRQ_pint(void); -void make_imask_irq(unsigned int irq); - -static inline int generic_irq_demux(int irq) -{ - return irq; -} - -#define irq_canonicalize(irq) (irq) -#define irq_demux(irq) sh_mv.mv_irq_demux(irq) - -#ifdef CONFIG_IRQSTACKS -extern void irq_ctx_init(int cpu); -extern void irq_ctx_exit(int cpu); -# define __ARCH_HAS_DO_SOFTIRQ -#else -# define irq_ctx_init(cpu) do { } while (0) -# define irq_ctx_exit(cpu) do { } while (0) -#endif - -#ifdef CONFIG_CPU_SH5 -#include -#endif - -#endif /* __ASM_SH_IRQ_H */ diff --git a/include/asm-sh/irq_regs.h b/include/asm-sh/irq_regs.h deleted file mode 100644 index 3dd9c0b7027..00000000000 --- a/include/asm-sh/irq_regs.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/include/asm-sh/irqflags.h b/include/asm-sh/irqflags.h deleted file mode 100644 index 46e71da5be6..00000000000 --- a/include/asm-sh/irqflags.h +++ /dev/null @@ -1,34 +0,0 @@ -#ifndef __ASM_SH_IRQFLAGS_H -#define __ASM_SH_IRQFLAGS_H - -#ifdef CONFIG_SUPERH32 -#include "irqflags_32.h" -#else -#include "irqflags_64.h" -#endif - -#define raw_local_save_flags(flags) \ - do { (flags) = __raw_local_save_flags(); } while (0) - -static inline int raw_irqs_disabled_flags(unsigned long flags) -{ - return (flags != 0); -} - -static inline int raw_irqs_disabled(void) -{ - unsigned long flags = __raw_local_save_flags(); - - return raw_irqs_disabled_flags(flags); -} - -#define raw_local_irq_save(flags) \ - do { (flags) = __raw_local_irq_save(); } while (0) - -static inline void raw_local_irq_restore(unsigned long flags) -{ - if ((flags & 0xf0) != 0xf0) - raw_local_irq_enable(); -} - -#endif /* __ASM_SH_IRQFLAGS_H */ diff --git a/include/asm-sh/irqflags_32.h b/include/asm-sh/irqflags_32.h deleted file mode 100644 index 60218f54134..00000000000 --- a/include/asm-sh/irqflags_32.h +++ /dev/null @@ -1,99 +0,0 @@ -#ifndef __ASM_SH_IRQFLAGS_32_H -#define __ASM_SH_IRQFLAGS_32_H - -static inline void raw_local_irq_enable(void) -{ - unsigned long __dummy0, __dummy1; - - __asm__ __volatile__ ( - "stc sr, %0\n\t" - "and %1, %0\n\t" -#ifdef CONFIG_CPU_HAS_SR_RB - "stc r6_bank, %1\n\t" - "or %1, %0\n\t" -#endif - "ldc %0, sr\n\t" - : "=&r" (__dummy0), "=r" (__dummy1) - : "1" (~0x000000f0) - : "memory" - ); -} - -static inline void raw_local_irq_disable(void) -{ - unsigned long flags; - - __asm__ __volatile__ ( - "stc sr, %0\n\t" - "or #0xf0, %0\n\t" - "ldc %0, sr\n\t" - : "=&z" (flags) - : /* no inputs */ - : "memory" - ); -} - -static inline void set_bl_bit(void) -{ - unsigned long __dummy0, __dummy1; - - __asm__ __volatile__ ( - "stc sr, %0\n\t" - "or %2, %0\n\t" - "and %3, %0\n\t" - "ldc %0, sr\n\t" - : "=&r" (__dummy0), "=r" (__dummy1) - : "r" (0x10000000), "r" (0xffffff0f) - : "memory" - ); -} - -static inline void clear_bl_bit(void) -{ - unsigned long __dummy0, __dummy1; - - __asm__ __volatile__ ( - "stc sr, %0\n\t" - "and %2, %0\n\t" - "ldc %0, sr\n\t" - : "=&r" (__dummy0), "=r" (__dummy1) - : "1" (~0x10000000) - : "memory" - ); -} - -static inline unsigned long __raw_local_save_flags(void) -{ - unsigned long flags; - - __asm__ __volatile__ ( - "stc sr, %0\n\t" - "and #0xf0, %0\n\t" - : "=&z" (flags) - : /* no inputs */ - : "memory" - ); - - return flags; -} - -static inline unsigned long __raw_local_irq_save(void) -{ - unsigned long flags, __dummy; - - __asm__ __volatile__ ( - "stc sr, %1\n\t" - "mov %1, %0\n\t" - "or #0xf0, %0\n\t" - "ldc %0, sr\n\t" - "mov %1, %0\n\t" - "and #0xf0, %0\n\t" - : "=&z" (flags), "=&r" (__dummy) - : /* no inputs */ - : "memory" - ); - - return flags; -} - -#endif /* __ASM_SH_IRQFLAGS_32_H */ diff --git a/include/asm-sh/irqflags_64.h b/include/asm-sh/irqflags_64.h deleted file mode 100644 index 4f6b8a56e7b..00000000000 --- a/include/asm-sh/irqflags_64.h +++ /dev/null @@ -1,85 +0,0 @@ -#ifndef __ASM_SH_IRQFLAGS_64_H -#define __ASM_SH_IRQFLAGS_64_H - -#include - -#define SR_MASK_LL 0x00000000000000f0LL -#define SR_BL_LL 0x0000000010000000LL - -static inline void raw_local_irq_enable(void) -{ - unsigned long long __dummy0, __dummy1 = ~SR_MASK_LL; - - __asm__ __volatile__("getcon " __SR ", %0\n\t" - "and %0, %1, %0\n\t" - "putcon %0, " __SR "\n\t" - : "=&r" (__dummy0) - : "r" (__dummy1)); -} - -static inline void raw_local_irq_disable(void) -{ - unsigned long long __dummy0, __dummy1 = SR_MASK_LL; - - __asm__ __volatile__("getcon " __SR ", %0\n\t" - "or %0, %1, %0\n\t" - "putcon %0, " __SR "\n\t" - : "=&r" (__dummy0) - : "r" (__dummy1)); -} - -static inline void set_bl_bit(void) -{ - unsigned long long __dummy0, __dummy1 = SR_BL_LL; - - __asm__ __volatile__("getcon " __SR ", %0\n\t" - "or %0, %1, %0\n\t" - "putcon %0, " __SR "\n\t" - : "=&r" (__dummy0) - : "r" (__dummy1)); - -} - -static inline void clear_bl_bit(void) -{ - unsigned long long __dummy0, __dummy1 = ~SR_BL_LL; - - __asm__ __volatile__("getcon " __SR ", %0\n\t" - "and %0, %1, %0\n\t" - "putcon %0, " __SR "\n\t" - : "=&r" (__dummy0) - : "r" (__dummy1)); -} - -static inline unsigned long __raw_local_save_flags(void) -{ - unsigned long long __dummy = SR_MASK_LL; - unsigned long flags; - - __asm__ __volatile__ ( - "getcon " __SR ", %0\n\t" - "and %0, %1, %0" - : "=&r" (flags) - : "r" (__dummy)); - - return flags; -} - -static inline unsigned long __raw_local_irq_save(void) -{ - unsigned long long __dummy0, __dummy1 = SR_MASK_LL; - unsigned long flags; - - __asm__ __volatile__ ( - "getcon " __SR ", %1\n\t" - "or %1, r63, %0\n\t" - "or %1, %2, %1\n\t" - "putcon %1, " __SR "\n\t" - "and %0, %2, %0" - : "=&r" (flags), "=&r" (__dummy0) - : "r" (__dummy1)); - - return flags; -} - -#endif /* __ASM_SH_IRQFLAGS_64_H */ diff --git a/include/asm-sh/kdebug.h b/include/asm-sh/kdebug.h deleted file mode 100644 index 49cd69051a8..00000000000 --- a/include/asm-sh/kdebug.h +++ /dev/null @@ -1,9 +0,0 @@ -#ifndef __ASM_SH_KDEBUG_H -#define __ASM_SH_KDEBUG_H - -/* Grossly misnamed. */ -enum die_val { - DIE_TRAP, -}; - -#endif /* __ASM_SH_KDEBUG_H */ diff --git a/include/asm-sh/kexec.h b/include/asm-sh/kexec.h deleted file mode 100644 index 00f4260ef09..00000000000 --- a/include/asm-sh/kexec.h +++ /dev/null @@ -1,62 +0,0 @@ -#ifndef __ASM_SH_KEXEC_H -#define __ASM_SH_KEXEC_H - -#include -#include - -/* - * KEXEC_SOURCE_MEMORY_LIMIT maximum page get_free_page can return. - * I.e. Maximum page that is mapped directly into kernel memory, - * and kmap is not required. - * - * Someone correct me if FIXADDR_START - PAGEOFFSET is not the correct - * calculation for the amount of memory directly mappable into the - * kernel memory space. - */ - -/* Maximum physical address we can use pages from */ -#define KEXEC_SOURCE_MEMORY_LIMIT (-1UL) -/* Maximum address we can reach in physical address mode */ -#define KEXEC_DESTINATION_MEMORY_LIMIT (-1UL) -/* Maximum address we can use for the control code buffer */ -#define KEXEC_CONTROL_MEMORY_LIMIT TASK_SIZE - -#define KEXEC_CONTROL_CODE_SIZE 4096 - -/* The native architecture */ -#define KEXEC_ARCH KEXEC_ARCH_SH - -static inline void crash_setup_regs(struct pt_regs *newregs, - struct pt_regs *oldregs) -{ - if (oldregs) - memcpy(newregs, oldregs, sizeof(*newregs)); - else { - __asm__ __volatile__ ("mov r0, %0" : "=r" (newregs->regs[0])); - __asm__ __volatile__ ("mov r1, %0" : "=r" (newregs->regs[1])); - __asm__ __volatile__ ("mov r2, %0" : "=r" (newregs->regs[2])); - __asm__ __volatile__ ("mov r3, %0" : "=r" (newregs->regs[3])); - __asm__ __volatile__ ("mov r4, %0" : "=r" (newregs->regs[4])); - __asm__ __volatile__ ("mov r5, %0" : "=r" (newregs->regs[5])); - __asm__ __volatile__ ("mov r6, %0" : "=r" (newregs->regs[6])); - __asm__ __volatile__ ("mov r7, %0" : "=r" (newregs->regs[7])); - __asm__ __volatile__ ("mov r8, %0" : "=r" (newregs->regs[8])); - __asm__ __volatile__ ("mov r9, %0" : "=r" (newregs->regs[9])); - __asm__ __volatile__ ("mov r10, %0" : "=r" (newregs->regs[10])); - __asm__ __volatile__ ("mov r11, %0" : "=r" (newregs->regs[11])); - __asm__ __volatile__ ("mov r12, %0" : "=r" (newregs->regs[12])); - __asm__ __volatile__ ("mov r13, %0" : "=r" (newregs->regs[13])); - __asm__ __volatile__ ("mov r14, %0" : "=r" (newregs->regs[14])); - __asm__ __volatile__ ("mov r15, %0" : "=r" (newregs->regs[15])); - - __asm__ __volatile__ ("sts pr, %0" : "=r" (newregs->pr)); - __asm__ __volatile__ ("sts macl, %0" : "=r" (newregs->macl)); - __asm__ __volatile__ ("sts mach, %0" : "=r" (newregs->mach)); - - __asm__ __volatile__ ("stc gbr, %0" : "=r" (newregs->gbr)); - __asm__ __volatile__ ("stc sr, %0" : "=r" (newregs->sr)); - - newregs->pc = (unsigned long)current_text_addr(); - } -} -#endif /* __ASM_SH_KEXEC_H */ diff --git a/include/asm-sh/kgdb.h b/include/asm-sh/kgdb.h deleted file mode 100644 index 24e42078f36..00000000000 --- a/include/asm-sh/kgdb.h +++ /dev/null @@ -1,69 +0,0 @@ -/* - * May be copied or modified under the terms of the GNU General Public - * License. See linux/COPYING for more information. - * - * Based on original code by Glenn Engel, Jim Kingdon, - * David Grothe , Tigran Aivazian, and - * Amit S. Kale - * - * Super-H port based on sh-stub.c (Ben Lee and Steve Chamberlain) by - * Henry Bell - * - * Header file for low-level support for remote debug using GDB. - * - */ - -#ifndef __KGDB_H -#define __KGDB_H - -#include - -/* Same as pt_regs but has vbr in place of syscall_nr */ -struct kgdb_regs { - unsigned long regs[16]; - unsigned long pc; - unsigned long pr; - unsigned long sr; - unsigned long gbr; - unsigned long mach; - unsigned long macl; - unsigned long vbr; -}; - -/* State info */ -extern char kgdb_in_gdb_mode; -extern int kgdb_nofault; /* Ignore bus errors (in gdb mem access) */ -extern char in_nmi; /* Debounce flag to prevent NMI reentry*/ - -/* SCI */ -extern int kgdb_portnum; -extern int kgdb_baud; -extern char kgdb_parity; -extern char kgdb_bits; - -/* Init and interface stuff */ -extern int kgdb_init(void); -extern int (*kgdb_getchar)(void); -extern void (*kgdb_putchar)(int); - -/* Trap functions */ -typedef void (kgdb_debug_hook_t)(struct pt_regs *regs); -typedef void (kgdb_bus_error_hook_t)(void); -extern kgdb_debug_hook_t *kgdb_debug_hook; -extern kgdb_bus_error_hook_t *kgdb_bus_err_hook; - -/* Console */ -struct console; -void kgdb_console_write(struct console *co, const char *s, unsigned count); -extern int kgdb_console_setup(struct console *, char *); - -/* Prototypes for jmp fns */ -#define _JBLEN 9 -typedef int jmp_buf[_JBLEN]; -extern void longjmp(jmp_buf __jmpb, int __retval); -extern int setjmp(jmp_buf __jmpb); - -/* Forced breakpoint */ -#define breakpoint() __asm__ __volatile__("trapa #0x3c") - -#endif diff --git a/include/asm-sh/kmap_types.h b/include/asm-sh/kmap_types.h deleted file mode 100644 index 84d565c696b..00000000000 --- a/include/asm-sh/kmap_types.h +++ /dev/null @@ -1,32 +0,0 @@ -#ifndef __SH_KMAP_TYPES_H -#define __SH_KMAP_TYPES_H - -/* Dummy header just to define km_type. */ - - -#ifdef CONFIG_DEBUG_HIGHMEM -# define D(n) __KM_FENCE_##n , -#else -# define D(n) -#endif - -enum km_type { -D(0) KM_BOUNCE_READ, -D(1) KM_SKB_SUNRPC_DATA, -D(2) KM_SKB_DATA_SOFTIRQ, -D(3) KM_USER0, -D(4) KM_USER1, -D(5) KM_BIO_SRC_IRQ, -D(6) KM_BIO_DST_IRQ, -D(7) KM_PTE0, -D(8) KM_PTE1, -D(9) KM_IRQ0, -D(10) KM_IRQ1, -D(11) KM_SOFTIRQ0, -D(12) KM_SOFTIRQ1, -D(13) KM_TYPE_NR -}; - -#undef D - -#endif diff --git a/include/asm-sh/landisk/gio.h b/include/asm-sh/landisk/gio.h deleted file mode 100644 index 35d7368b718..00000000000 --- a/include/asm-sh/landisk/gio.h +++ /dev/null @@ -1,37 +0,0 @@ -#ifndef __ASM_SH_LANDISK_GIO_H -#define __ASM_SH_LANDISK_GIO_H - -#include - -/* version */ -#define VERSION_STR "1.00" - -/* Driver name */ -#define GIO_DRIVER_NAME "/dev/giodrv" - -/* Use 'k' as magic number */ -#define GIODRV_IOC_MAGIC 'k' - -#define GIODRV_IOCRESET _IO(GIODRV_IOC_MAGIC, 0) -/* - * S means "Set" through a ptr, - * T means "Tell" directly - * G means "Get" (to a pointed var) - * Q means "Query", response is on the return value - * X means "eXchange": G and S atomically - * H means "sHift": T and Q atomically - */ -#define GIODRV_IOCSGIODATA1 _IOW(GIODRV_IOC_MAGIC, 1, unsigned char *) -#define GIODRV_IOCGGIODATA1 _IOR(GIODRV_IOC_MAGIC, 2, unsigned char *) -#define GIODRV_IOCSGIODATA2 _IOW(GIODRV_IOC_MAGIC, 3, unsigned short *) -#define GIODRV_IOCGGIODATA2 _IOR(GIODRV_IOC_MAGIC, 4, unsigned short *) -#define GIODRV_IOCSGIODATA4 _IOW(GIODRV_IOC_MAGIC, 5, unsigned long *) -#define GIODRV_IOCGGIODATA4 _IOR(GIODRV_IOC_MAGIC, 6, unsigned long *) -#define GIODRV_IOCSGIOSETADDR _IOW(GIODRV_IOC_MAGIC, 7, unsigned long *) -#define GIODRV_IOCHARDRESET _IO(GIODRV_IOC_MAGIC, 8) /* debugging tool */ -#define GIODRV_IOC_MAXNR 8 - -#define GIO_READ 0x00000000 -#define GIO_WRITE 0x00000001 - -#endif /* __ASM_SH_LANDISK_GIO_H */ diff --git a/include/asm-sh/landisk/iodata_landisk.h b/include/asm-sh/landisk/iodata_landisk.h deleted file mode 100644 index 6fb04ab38b9..00000000000 --- a/include/asm-sh/landisk/iodata_landisk.h +++ /dev/null @@ -1,42 +0,0 @@ -#ifndef __ASM_SH_IODATA_LANDISK_H -#define __ASM_SH_IODATA_LANDISK_H - -/* - * linux/include/asm-sh/landisk/iodata_landisk.h - * - * Copyright (C) 2000 Atom Create Engineering Co., Ltd. - * - * IO-DATA LANDISK support - */ - -/* Box specific addresses. */ - -#define PA_USB 0xa4000000 /* USB Controller M66590 */ - -#define PA_ATARST 0xb0000000 /* ATA/FATA Access Control Register */ -#define PA_LED 0xb0000001 /* LED Control Register */ -#define PA_STATUS 0xb0000002 /* Switch Status Register */ -#define PA_SHUTDOWN 0xb0000003 /* Shutdown Control Register */ -#define PA_PCIPME 0xb0000004 /* PCI PME Status Register */ -#define PA_IMASK 0xb0000005 /* Interrupt Mask Register */ -/* 2003.10.31 I-O DATA NSD NWG add. for shutdown port clear */ -#define PA_PWRINT_CLR 0xb0000006 /* Shutdown Interrupt clear Register */ - -#define PA_PIDE_OFFSET 0x40 /* CF IDE Offset */ -#define PA_SIDE_OFFSET 0x40 /* HDD IDE Offset */ - -#define IRQ_PCIINTA 5 /* PCI INTA IRQ */ -#define IRQ_PCIINTB 6 /* PCI INTB IRQ */ -#define IRQ_PCIINDC 7 /* PCI INTC IRQ */ -#define IRQ_PCIINTD 8 /* PCI INTD IRQ */ -#define IRQ_ATA 9 /* ATA IRQ */ -#define IRQ_FATA 10 /* FATA IRQ */ -#define IRQ_POWER 11 /* Power Switch IRQ */ -#define IRQ_BUTTON 12 /* USL-5P Button IRQ */ -#define IRQ_FAULT 13 /* USL-5P Fault IRQ */ - -#define __IO_PREFIX landisk -#include - -#endif /* __ASM_SH_IODATA_LANDISK_H */ - diff --git a/include/asm-sh/lboxre2.h b/include/asm-sh/lboxre2.h deleted file mode 100644 index e6d16050492..00000000000 --- a/include/asm-sh/lboxre2.h +++ /dev/null @@ -1,27 +0,0 @@ -#ifndef __ASM_SH_LBOXRE2_H -#define __ASM_SH_LBOXRE2_H - -/* - * Copyright (C) 2007 Nobuhiro Iwamatsu - * - * NTT COMWARE L-BOX RE2 support - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - */ - -#define IRQ_CF1 9 /* CF1 */ -#define IRQ_CF0 10 /* CF0 */ -#define IRQ_INTD 11 /* INTD */ -#define IRQ_ETH1 12 /* Ether1 */ -#define IRQ_ETH0 13 /* Ether0 */ -#define IRQ_INTA 14 /* INTA */ - -void init_lboxre2_IRQ(void); - -#define __IO_PREFIX lboxre2 -#include - -#endif /* __ASM_SH_LBOXRE2_H */ diff --git a/include/asm-sh/linkage.h b/include/asm-sh/linkage.h deleted file mode 100644 index 3565a4f4009..00000000000 --- a/include/asm-sh/linkage.h +++ /dev/null @@ -1,7 +0,0 @@ -#ifndef __ASM_LINKAGE_H -#define __ASM_LINKAGE_H - -#define __ALIGN .balign 4 -#define __ALIGN_STR ".balign 4" - -#endif diff --git a/include/asm-sh/local.h b/include/asm-sh/local.h deleted file mode 100644 index 9ed9b9cb459..00000000000 --- a/include/asm-sh/local.h +++ /dev/null @@ -1,7 +0,0 @@ -#ifndef __ASM_SH_LOCAL_H -#define __ASM_SH_LOCAL_H - -#include - -#endif /* __ASM_SH_LOCAL_H */ - diff --git a/include/asm-sh/machvec.h b/include/asm-sh/machvec.h deleted file mode 100644 index b2e4124070a..00000000000 --- a/include/asm-sh/machvec.h +++ /dev/null @@ -1,70 +0,0 @@ -/* - * include/asm-sh/machvec.h - * - * Copyright 2000 Stuart Menefy (stuart.menefy@st.com) - * - * May be copied or modified under the terms of the GNU General Public - * License. See linux/COPYING for more information. - */ - -#ifndef _ASM_SH_MACHVEC_H -#define _ASM_SH_MACHVEC_H - -#include -#include -#include - -struct device; - -struct sh_machine_vector { - void (*mv_setup)(char **cmdline_p); - const char *mv_name; - int mv_nr_irqs; - - u8 (*mv_inb)(unsigned long); - u16 (*mv_inw)(unsigned long); - u32 (*mv_inl)(unsigned long); - void (*mv_outb)(u8, unsigned long); - void (*mv_outw)(u16, unsigned long); - void (*mv_outl)(u32, unsigned long); - - u8 (*mv_inb_p)(unsigned long); - u16 (*mv_inw_p)(unsigned long); - u32 (*mv_inl_p)(unsigned long); - void (*mv_outb_p)(u8, unsigned long); - void (*mv_outw_p)(u16, unsigned long); - void (*mv_outl_p)(u32, unsigned long); - - void (*mv_insb)(unsigned long, void *dst, unsigned long count); - void (*mv_insw)(unsigned long, void *dst, unsigned long count); - void (*mv_insl)(unsigned long, void *dst, unsigned long count); - void (*mv_outsb)(unsigned long, const void *src, unsigned long count); - void (*mv_outsw)(unsigned long, const void *src, unsigned long count); - void (*mv_outsl)(unsigned long, const void *src, unsigned long count); - - u8 (*mv_readb)(void __iomem *); - u16 (*mv_readw)(void __iomem *); - u32 (*mv_readl)(void __iomem *); - void (*mv_writeb)(u8, void __iomem *); - void (*mv_writew)(u16, void __iomem *); - void (*mv_writel)(u32, void __iomem *); - - int (*mv_irq_demux)(int irq); - - void (*mv_init_irq)(void); - void (*mv_init_pci)(void); - - void (*mv_heartbeat)(void); - - void __iomem *(*mv_ioport_map)(unsigned long port, unsigned int size); - void (*mv_ioport_unmap)(void __iomem *); -}; - -extern struct sh_machine_vector sh_mv; - -#define get_system_type() sh_mv.mv_name - -#define __initmv \ - __used __section(.machvec.init) - -#endif /* _ASM_SH_MACHVEC_H */ diff --git a/include/asm-sh/magicpanelr2.h b/include/asm-sh/magicpanelr2.h deleted file mode 100644 index c644a77ee35..00000000000 --- a/include/asm-sh/magicpanelr2.h +++ /dev/null @@ -1,67 +0,0 @@ -/* - * include/asm-sh/magicpanelr2.h - * - * Copyright (C) 2007 Markus Brunner, Mark Jonas - * - * I/O addresses and bitmasks for Magic Panel Release 2 board - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ - -#ifndef __ASM_SH_MAGICPANELR2_H -#define __ASM_SH_MAGICPANELR2_H - -#include - -#define __IO_PREFIX mpr2 -#include - - -#define SETBITS_OUTB(mask, reg) ctrl_outb(ctrl_inb(reg) | mask, reg) -#define SETBITS_OUTW(mask, reg) ctrl_outw(ctrl_inw(reg) | mask, reg) -#define SETBITS_OUTL(mask, reg) ctrl_outl(ctrl_inl(reg) | mask, reg) -#define CLRBITS_OUTB(mask, reg) ctrl_outb(ctrl_inb(reg) & ~mask, reg) -#define CLRBITS_OUTW(mask, reg) ctrl_outw(ctrl_inw(reg) & ~mask, reg) -#define CLRBITS_OUTL(mask, reg) ctrl_outl(ctrl_inl(reg) & ~mask, reg) - - -#define PA_LED PORT_PADR /* LED */ - - -/* BSC */ -#define CMNCR 0xA4FD0000UL -#define CS0BCR 0xA4FD0004UL -#define CS2BCR 0xA4FD0008UL -#define CS3BCR 0xA4FD000CUL -#define CS4BCR 0xA4FD0010UL -#define CS5ABCR 0xA4FD0014UL -#define CS5BBCR 0xA4FD0018UL -#define CS6ABCR 0xA4FD001CUL -#define CS6BBCR 0xA4FD0020UL -#define CS0WCR 0xA4FD0024UL -#define CS2WCR 0xA4FD0028UL -#define CS3WCR 0xA4FD002CUL -#define CS4WCR 0xA4FD0030UL -#define CS5AWCR 0xA4FD0034UL -#define CS5BWCR 0xA4FD0038UL -#define CS6AWCR 0xA4FD003CUL -#define CS6BWCR 0xA4FD0040UL - - -/* usb */ - -#define PORT_UTRCTL 0xA405012CUL -#define PORT_UCLKCR_W 0xA40A0008UL - -#define INTC_ICR0 0xA414FEE0UL -#define INTC_ICR1 0xA4140010UL -#define INTC_ICR2 0xA4140012UL - -/* MTD */ - -#define MPR2_MTD_BOOTLOADER_SIZE 0x00060000UL -#define MPR2_MTD_KERNEL_SIZE 0x00200000UL - -#endif /* __ASM_SH_MAGICPANELR2_H */ diff --git a/include/asm-sh/mc146818rtc.h b/include/asm-sh/mc146818rtc.h deleted file mode 100644 index 0aee96a9733..00000000000 --- a/include/asm-sh/mc146818rtc.h +++ /dev/null @@ -1,7 +0,0 @@ -/* - * Machine dependent access functions for RTC registers. - */ -#ifndef _ASM_MC146818RTC_H -#define _ASM_MC146818RTC_H - -#endif /* _ASM_MC146818RTC_H */ diff --git a/include/asm-sh/microdev.h b/include/asm-sh/microdev.h deleted file mode 100644 index 1aed15856e1..00000000000 --- a/include/asm-sh/microdev.h +++ /dev/null @@ -1,80 +0,0 @@ -/* - * linux/include/asm-sh/microdev.h - * - * Copyright (C) 2003 Sean McGoogan (Sean.McGoogan@superh.com) - * - * Definitions for the SuperH SH4-202 MicroDev board. - * - * May be copied or modified under the terms of the GNU General Public - * License. See linux/COPYING for more information. - */ -#ifndef __ASM_SH_MICRODEV_H -#define __ASM_SH_MICRODEV_H - -extern void init_microdev_irq(void); -extern void microdev_print_fpga_intc_status(void); - -/* - * The following are useful macros for manipulating the interrupt - * controller (INTC) on the CPU-board FPGA. should be noted that there - * is an INTC on the FPGA, and a separate INTC on the SH4-202 core - - * these are two different things, both of which need to be prorammed to - * correctly route - unfortunately, they have the same name and - * abbreviations! - */ -#define MICRODEV_FPGA_INTC_BASE 0xa6110000ul /* INTC base address on CPU-board FPGA */ -#define MICRODEV_FPGA_INTENB_REG (MICRODEV_FPGA_INTC_BASE+0ul) /* Interrupt Enable Register on INTC on CPU-board FPGA */ -#define MICRODEV_FPGA_INTDSB_REG (MICRODEV_FPGA_INTC_BASE+8ul) /* Interrupt Disable Register on INTC on CPU-board FPGA */ -#define MICRODEV_FPGA_INTC_MASK(n) (1ul<<(n)) /* Interrupt mask to enable/disable INTC in CPU-board FPGA */ -#define MICRODEV_FPGA_INTPRI_REG(n) (MICRODEV_FPGA_INTC_BASE+0x10+((n)/8)*8)/* Interrupt Priority Register on INTC on CPU-board FPGA */ -#define MICRODEV_FPGA_INTPRI_LEVEL(n,x) ((x)<<(((n)%8)*4)) /* MICRODEV_FPGA_INTPRI_LEVEL(int_number, int_level) */ -#define MICRODEV_FPGA_INTPRI_MASK(n) (MICRODEV_FPGA_INTPRI_LEVEL((n),0xful)) /* Interrupt Priority Mask on INTC on CPU-board FPGA */ -#define MICRODEV_FPGA_INTSRC_REG (MICRODEV_FPGA_INTC_BASE+0x30ul) /* Interrupt Source Register on INTC on CPU-board FPGA */ -#define MICRODEV_FPGA_INTREQ_REG (MICRODEV_FPGA_INTC_BASE+0x38ul) /* Interrupt Request Register on INTC on CPU-board FPGA */ - - -/* - * The following are the IRQ numbers for the Linux Kernel for external - * interrupts. i.e. the numbers seen by 'cat /proc/interrupt'. - */ -#define MICRODEV_LINUX_IRQ_KEYBOARD 1 /* SuperIO Keyboard */ -#define MICRODEV_LINUX_IRQ_SERIAL1 2 /* SuperIO Serial #1 */ -#define MICRODEV_LINUX_IRQ_ETHERNET 3 /* on-board Ethnernet */ -#define MICRODEV_LINUX_IRQ_SERIAL2 4 /* SuperIO Serial #2 */ -#define MICRODEV_LINUX_IRQ_USB_HC 7 /* on-board USB HC */ -#define MICRODEV_LINUX_IRQ_MOUSE 12 /* SuperIO PS/2 Mouse */ -#define MICRODEV_LINUX_IRQ_IDE2 13 /* SuperIO IDE #2 */ -#define MICRODEV_LINUX_IRQ_IDE1 14 /* SuperIO IDE #1 */ - -/* - * The following are the IRQ numbers for the INTC on the FPGA for - * external interrupts. i.e. the bits in the INTC registers in the - * FPGA. - */ -#define MICRODEV_FPGA_IRQ_KEYBOARD 1 /* SuperIO Keyboard */ -#define MICRODEV_FPGA_IRQ_SERIAL1 3 /* SuperIO Serial #1 */ -#define MICRODEV_FPGA_IRQ_SERIAL2 4 /* SuperIO Serial #2 */ -#define MICRODEV_FPGA_IRQ_MOUSE 12 /* SuperIO PS/2 Mouse */ -#define MICRODEV_FPGA_IRQ_IDE1 14 /* SuperIO IDE #1 */ -#define MICRODEV_FPGA_IRQ_IDE2 15 /* SuperIO IDE #2 */ -#define MICRODEV_FPGA_IRQ_USB_HC 16 /* on-board USB HC */ -#define MICRODEV_FPGA_IRQ_ETHERNET 18 /* on-board Ethnernet */ - -#define MICRODEV_IRQ_PCI_INTA 8 -#define MICRODEV_IRQ_PCI_INTB 9 -#define MICRODEV_IRQ_PCI_INTC 10 -#define MICRODEV_IRQ_PCI_INTD 11 - -#define __IO_PREFIX microdev -#include - -#if defined(CONFIG_PCI) -unsigned char microdev_pci_inb(unsigned long port); -unsigned short microdev_pci_inw(unsigned long port); -unsigned long microdev_pci_inl(unsigned long port); -void microdev_pci_outb(unsigned char data, unsigned long port); -void microdev_pci_outw(unsigned short data, unsigned long port); -void microdev_pci_outl(unsigned long data, unsigned long port); -#endif - -#endif /* __ASM_SH_MICRODEV_H */ diff --git a/include/asm-sh/migor.h b/include/asm-sh/migor.h deleted file mode 100644 index 10016e0f4a4..00000000000 --- a/include/asm-sh/migor.h +++ /dev/null @@ -1,65 +0,0 @@ -#ifndef __ASM_SH_MIGOR_H -#define __ASM_SH_MIGOR_H - -/* - * linux/include/asm-sh/migor.h - * - * Copyright (C) 2008 Renesas Solutions - * - * Portions Copyright (C) 2007 Nobuhiro Iwamatsu - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - */ -#include - -/* GPIO */ -#define PORT_PACR 0xa4050100 -#define PORT_PDCR 0xa4050106 -#define PORT_PECR 0xa4050108 -#define PORT_PHCR 0xa405010e -#define PORT_PJCR 0xa4050110 -#define PORT_PKCR 0xa4050112 -#define PORT_PLCR 0xa4050114 -#define PORT_PMCR 0xa4050116 -#define PORT_PRCR 0xa405011c -#define PORT_PTCR 0xa4050140 -#define PORT_PUCR 0xa4050142 -#define PORT_PVCR 0xa4050144 -#define PORT_PWCR 0xa4050146 -#define PORT_PXCR 0xa4050148 -#define PORT_PYCR 0xa405014a -#define PORT_PZCR 0xa405014c -#define PORT_PADR 0xa4050120 -#define PORT_PHDR 0xa405012e -#define PORT_PTDR 0xa4050160 -#define PORT_PWDR 0xa4050166 - -#define PORT_HIZCRA 0xa4050158 -#define PORT_HIZCRC 0xa405015c - -#define PORT_MSELCRB 0xa4050182 - -#define MSTPCR1 0xa4150034 -#define MSTPCR2 0xa4150038 - -#define PORT_PSELA 0xa405014e -#define PORT_PSELB 0xa4050150 -#define PORT_PSELC 0xa4050152 -#define PORT_PSELD 0xa4050154 -#define PORT_PSELE 0xa4050156 - -#define PORT_HIZCRA 0xa4050158 -#define PORT_HIZCRB 0xa405015a -#define PORT_HIZCRC 0xa405015c - -#define BSC_CS6ABCR 0xfec1001c - -#include - -int migor_lcd_qvga_setup(void *board_data, void *sys_ops_handle, - struct sh_mobile_lcdc_sys_bus_ops *sys_ops); - -#endif /* __ASM_SH_MIGOR_H */ diff --git a/include/asm-sh/mman.h b/include/asm-sh/mman.h deleted file mode 100644 index 156eb0225cf..00000000000 --- a/include/asm-sh/mman.h +++ /dev/null @@ -1,17 +0,0 @@ -#ifndef __ASM_SH_MMAN_H -#define __ASM_SH_MMAN_H - -#include - -#define MAP_GROWSDOWN 0x0100 /* stack-like segment */ -#define MAP_DENYWRITE 0x0800 /* ETXTBSY */ -#define MAP_EXECUTABLE 0x1000 /* mark it as an executable */ -#define MAP_LOCKED 0x2000 /* pages are locked */ -#define MAP_NORESERVE 0x4000 /* don't check for reservations */ -#define MAP_POPULATE 0x8000 /* populate (prefault) page tables */ -#define MAP_NONBLOCK 0x10000 /* do not block on IO */ - -#define MCL_CURRENT 1 /* lock all current mappings */ -#define MCL_FUTURE 2 /* lock all future mappings */ - -#endif /* __ASM_SH_MMAN_H */ diff --git a/include/asm-sh/mmu.h b/include/asm-sh/mmu.h deleted file mode 100644 index fdcb93bc6d1..00000000000 --- a/include/asm-sh/mmu.h +++ /dev/null @@ -1,76 +0,0 @@ -#ifndef __MMU_H -#define __MMU_H - -/* Default "unsigned long" context */ -typedef unsigned long mm_context_id_t[NR_CPUS]; - -typedef struct { -#ifdef CONFIG_MMU - mm_context_id_t id; - void *vdso; -#else - struct vm_list_struct *vmlist; - unsigned long end_brk; -#endif -#ifdef CONFIG_BINFMT_ELF_FDPIC - unsigned long exec_fdpic_loadmap; - unsigned long interp_fdpic_loadmap; -#endif -} mm_context_t; - -/* - * Privileged Space Mapping Buffer (PMB) definitions - */ -#define PMB_PASCR 0xff000070 -#define PMB_IRMCR 0xff000078 - -#define PMB_ADDR 0xf6100000 -#define PMB_DATA 0xf7100000 -#define PMB_ENTRY_MAX 16 -#define PMB_E_MASK 0x0000000f -#define PMB_E_SHIFT 8 - -#define PMB_SZ_16M 0x00000000 -#define PMB_SZ_64M 0x00000010 -#define PMB_SZ_128M 0x00000080 -#define PMB_SZ_512M 0x00000090 -#define PMB_SZ_MASK PMB_SZ_512M -#define PMB_C 0x00000008 -#define PMB_WT 0x00000001 -#define PMB_UB 0x00000200 -#define PMB_V 0x00000100 - -#define PMB_NO_ENTRY (-1) - -struct pmb_entry; - -struct pmb_entry { - unsigned long vpn; - unsigned long ppn; - unsigned long flags; - - /* - * 0 .. NR_PMB_ENTRIES for specific entry selection, or - * PMB_NO_ENTRY to search for a free one - */ - int entry; - - struct pmb_entry *next; - /* Adjacent entry link for contiguous multi-entry mappings */ - struct pmb_entry *link; -}; - -/* arch/sh/mm/pmb.c */ -int __set_pmb_entry(unsigned long vpn, unsigned long ppn, - unsigned long flags, int *entry); -int set_pmb_entry(struct pmb_entry *pmbe); -void clear_pmb_entry(struct pmb_entry *pmbe); -struct pmb_entry *pmb_alloc(unsigned long vpn, unsigned long ppn, - unsigned long flags); -void pmb_free(struct pmb_entry *pmbe); -long pmb_remap(unsigned long virt, unsigned long phys, - unsigned long size, unsigned long flags); -void pmb_unmap(unsigned long addr); - -#endif /* __MMU_H */ - diff --git a/include/asm-sh/mmu_context.h b/include/asm-sh/mmu_context.h deleted file mode 100644 index 8589a50febd..00000000000 --- a/include/asm-sh/mmu_context.h +++ /dev/null @@ -1,185 +0,0 @@ -/* - * Copyright (C) 1999 Niibe Yutaka - * Copyright (C) 2003 - 2007 Paul Mundt - * - * ASID handling idea taken from MIPS implementation. - */ -#ifndef __ASM_SH_MMU_CONTEXT_H -#define __ASM_SH_MMU_CONTEXT_H - -#ifdef __KERNEL__ -#include -#include -#include -#include -#include - -/* - * The MMU "context" consists of two things: - * (a) TLB cache version (or round, cycle whatever expression you like) - * (b) ASID (Address Space IDentifier) - */ -#define MMU_CONTEXT_ASID_MASK 0x000000ff -#define MMU_CONTEXT_VERSION_MASK 0xffffff00 -#define MMU_CONTEXT_FIRST_VERSION 0x00000100 -#define NO_CONTEXT 0 - -/* ASID is 8-bit value, so it can't be 0x100 */ -#define MMU_NO_ASID 0x100 - -#define asid_cache(cpu) (cpu_data[cpu].asid_cache) - -#ifdef CONFIG_MMU -#define cpu_context(cpu, mm) ((mm)->context.id[cpu]) - -#define cpu_asid(cpu, mm) \ - (cpu_context((cpu), (mm)) & MMU_CONTEXT_ASID_MASK) - -/* - * Virtual Page Number mask - */ -#define MMU_VPN_MASK 0xfffff000 - -#if defined(CONFIG_SUPERH32) -#include "mmu_context_32.h" -#else -#include "mmu_context_64.h" -#endif - -/* - * Get MMU context if needed. - */ -static inline void get_mmu_context(struct mm_struct *mm, unsigned int cpu) -{ - unsigned long asid = asid_cache(cpu); - - /* Check if we have old version of context. */ - if (((cpu_context(cpu, mm) ^ asid) & MMU_CONTEXT_VERSION_MASK) == 0) - /* It's up to date, do nothing */ - return; - - /* It's old, we need to get new context with new version. */ - if (!(++asid & MMU_CONTEXT_ASID_MASK)) { - /* - * We exhaust ASID of this version. - * Flush all TLB and start new cycle. - */ - flush_tlb_all(); - -#ifdef CONFIG_SUPERH64 - /* - * The SH-5 cache uses the ASIDs, requiring both the I and D - * cache to be flushed when the ASID is exhausted. Weak. - */ - flush_cache_all(); -#endif - - /* - * Fix version; Note that we avoid version #0 - * to distingush NO_CONTEXT. - */ - if (!asid) - asid = MMU_CONTEXT_FIRST_VERSION; - } - - cpu_context(cpu, mm) = asid_cache(cpu) = asid; -} - -/* - * Initialize the context related info for a new mm_struct - * instance. - */ -static inline int init_new_context(struct task_struct *tsk, - struct mm_struct *mm) -{ - int i; - - for (i = 0; i < num_online_cpus(); i++) - cpu_context(i, mm) = NO_CONTEXT; - - return 0; -} - -/* - * After we have set current->mm to a new value, this activates - * the context for the new mm so we see the new mappings. - */ -static inline void activate_context(struct mm_struct *mm, unsigned int cpu) -{ - get_mmu_context(mm, cpu); - set_asid(cpu_asid(cpu, mm)); -} - -static inline void switch_mm(struct mm_struct *prev, - struct mm_struct *next, - struct task_struct *tsk) -{ - unsigned int cpu = smp_processor_id(); - - if (likely(prev != next)) { - cpu_set(cpu, next->cpu_vm_mask); - set_TTB(next->pgd); - activate_context(next, cpu); - } else - if (!cpu_test_and_set(cpu, next->cpu_vm_mask)) - activate_context(next, cpu); -} -#else -#define get_mmu_context(mm) do { } while (0) -#define init_new_context(tsk,mm) (0) -#define destroy_context(mm) do { } while (0) -#define set_asid(asid) do { } while (0) -#define get_asid() (0) -#define cpu_asid(cpu, mm) ({ (void)cpu; 0; }) -#define switch_and_save_asid(asid) (0) -#define set_TTB(pgd) do { } while (0) -#define get_TTB() (0) -#define activate_context(mm,cpu) do { } while (0) -#define switch_mm(prev,next,tsk) do { } while (0) -#endif /* CONFIG_MMU */ - -#define activate_mm(prev, next) switch_mm((prev),(next),NULL) -#define deactivate_mm(tsk,mm) do { } while (0) -#define enter_lazy_tlb(mm,tsk) do { } while (0) - -#if defined(CONFIG_CPU_SH3) || defined(CONFIG_CPU_SH4) -/* - * If this processor has an MMU, we need methods to turn it off/on .. - * paging_init() will also have to be updated for the processor in - * question. - */ -static inline void enable_mmu(void) -{ - unsigned int cpu = smp_processor_id(); - - /* Enable MMU */ - ctrl_outl(MMU_CONTROL_INIT, MMUCR); - ctrl_barrier(); - - if (asid_cache(cpu) == NO_CONTEXT) - asid_cache(cpu) = MMU_CONTEXT_FIRST_VERSION; - - set_asid(asid_cache(cpu) & MMU_CONTEXT_ASID_MASK); -} - -static inline void disable_mmu(void) -{ - unsigned long cr; - - cr = ctrl_inl(MMUCR); - cr &= ~MMU_CONTROL_INIT; - ctrl_outl(cr, MMUCR); - - ctrl_barrier(); -} -#else -/* - * MMU control handlers for processors lacking memory - * management hardware. - */ -#define enable_mmu() do { } while (0) -#define disable_mmu() do { } while (0) -#endif - -#endif /* __KERNEL__ */ -#endif /* __ASM_SH_MMU_CONTEXT_H */ diff --git a/include/asm-sh/mmu_context_32.h b/include/asm-sh/mmu_context_32.h deleted file mode 100644 index f4f9aebd68b..00000000000 --- a/include/asm-sh/mmu_context_32.h +++ /dev/null @@ -1,47 +0,0 @@ -#ifndef __ASM_SH_MMU_CONTEXT_32_H -#define __ASM_SH_MMU_CONTEXT_32_H - -/* - * Destroy context related info for an mm_struct that is about - * to be put to rest. - */ -static inline void destroy_context(struct mm_struct *mm) -{ - /* Do nothing */ -} - -static inline void set_asid(unsigned long asid) -{ - unsigned long __dummy; - - __asm__ __volatile__ ("mov.l %2, %0\n\t" - "and %3, %0\n\t" - "or %1, %0\n\t" - "mov.l %0, %2" - : "=&r" (__dummy) - : "r" (asid), "m" (__m(MMU_PTEH)), - "r" (0xffffff00)); -} - -static inline unsigned long get_asid(void) -{ - unsigned long asid; - - __asm__ __volatile__ ("mov.l %1, %0" - : "=r" (asid) - : "m" (__m(MMU_PTEH))); - asid &= MMU_CONTEXT_ASID_MASK; - return asid; -} - -/* MMU_TTB is used for optimizing the fault handling. */ -static inline void set_TTB(pgd_t *pgd) -{ - ctrl_outl((unsigned long)pgd, MMU_TTB); -} - -static inline pgd_t *get_TTB(void) -{ - return (pgd_t *)ctrl_inl(MMU_TTB); -} -#endif /* __ASM_SH_MMU_CONTEXT_32_H */ diff --git a/include/asm-sh/mmu_context_64.h b/include/asm-sh/mmu_context_64.h deleted file mode 100644 index 9649f1c07ca..00000000000 --- a/include/asm-sh/mmu_context_64.h +++ /dev/null @@ -1,78 +0,0 @@ -#ifndef __ASM_SH_MMU_CONTEXT_64_H -#define __ASM_SH_MMU_CONTEXT_64_H - -/* - * sh64-specific mmu_context interface. - * - * Copyright (C) 2000, 2001 Paolo Alberelli - * Copyright (C) 2003 - 2007 Paul Mundt - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ -#include -#include - -#define SR_ASID_MASK 0xffffffffff00ffffULL -#define SR_ASID_SHIFT 16 - -/* - * Destroy context related info for an mm_struct that is about - * to be put to rest. - */ -static inline void destroy_context(struct mm_struct *mm) -{ - /* Well, at least free TLB entries */ - flush_tlb_mm(mm); -} - -static inline unsigned long get_asid(void) -{ - unsigned long long sr; - - asm volatile ("getcon " __SR ", %0\n\t" - : "=r" (sr)); - - sr = (sr >> SR_ASID_SHIFT) & MMU_CONTEXT_ASID_MASK; - return (unsigned long) sr; -} - -/* Set ASID into SR */ -static inline void set_asid(unsigned long asid) -{ - unsigned long long sr, pc; - - asm volatile ("getcon " __SR ", %0" : "=r" (sr)); - - sr = (sr & SR_ASID_MASK) | (asid << SR_ASID_SHIFT); - - /* - * It is possible that this function may be inlined and so to avoid - * the assembler reporting duplicate symbols we make use of the - * gas trick of generating symbols using numerics and forward - * reference. - */ - asm volatile ("movi 1, %1\n\t" - "shlli %1, 28, %1\n\t" - "or %0, %1, %1\n\t" - "putcon %1, " __SR "\n\t" - "putcon %0, " __SSR "\n\t" - "movi 1f, %1\n\t" - "ori %1, 1 , %1\n\t" - "putcon %1, " __SPC "\n\t" - "rte\n" - "1:\n\t" - : "=r" (sr), "=r" (pc) : "0" (sr)); -} - -/* arch/sh/kernel/cpu/sh5/entry.S */ -extern unsigned long switch_and_save_asid(unsigned long new_asid); - -/* No spare register to twiddle, so use a software cache */ -extern pgd_t *mmu_pdtp_cache; - -#define set_TTB(pgd) (mmu_pdtp_cache = (pgd)) -#define get_TTB() (mmu_pdtp_cache) - -#endif /* __ASM_SH_MMU_CONTEXT_64_H */ diff --git a/include/asm-sh/mmzone.h b/include/asm-sh/mmzone.h deleted file mode 100644 index 2969253c404..00000000000 --- a/include/asm-sh/mmzone.h +++ /dev/null @@ -1,48 +0,0 @@ -#ifndef __ASM_SH_MMZONE_H -#define __ASM_SH_MMZONE_H - -#ifdef __KERNEL__ - -#ifdef CONFIG_NEED_MULTIPLE_NODES -extern struct pglist_data *node_data[]; -#define NODE_DATA(nid) (node_data[nid]) - -#define node_start_pfn(nid) (NODE_DATA(nid)->node_start_pfn) -#define node_end_pfn(nid) (NODE_DATA(nid)->node_start_pfn + \ - NODE_DATA(nid)->node_spanned_pages) - -static inline int pfn_to_nid(unsigned long pfn) -{ - int nid; - - for (nid = 0; nid < MAX_NUMNODES; nid++) - if (pfn >= node_start_pfn(nid) && pfn <= node_end_pfn(nid)) - break; - - return nid; -} - -static inline struct pglist_data *pfn_to_pgdat(unsigned long pfn) -{ - return NODE_DATA(pfn_to_nid(pfn)); -} - -/* arch/sh/mm/numa.c */ -void __init setup_bootmem_node(int nid, unsigned long start, unsigned long end); -#else -static inline void -setup_bootmem_node(int nid, unsigned long start, unsigned long end) -{ -} -#endif /* CONFIG_NEED_MULTIPLE_NODES */ - -/* Platform specific mem init */ -void __init plat_mem_setup(void); - -/* arch/sh/kernel/setup.c */ -void __init setup_bootmem_allocator(unsigned long start_pfn); -void __init __add_active_range(unsigned int nid, unsigned long start_pfn, - unsigned long end_pfn); - -#endif /* __KERNEL__ */ -#endif /* __ASM_SH_MMZONE_H */ diff --git a/include/asm-sh/module.h b/include/asm-sh/module.h deleted file mode 100644 index 46eccd33166..00000000000 --- a/include/asm-sh/module.h +++ /dev/null @@ -1,44 +0,0 @@ -#ifndef _ASM_SH_MODULE_H -#define _ASM_SH_MODULE_H - -/* - * This file contains the SH architecture specific module code. - */ - -struct mod_arch_specific { - /* Nothing to see here .. */ -}; - -#define Elf_Shdr Elf32_Shdr -#define Elf_Sym Elf32_Sym -#define Elf_Ehdr Elf32_Ehdr - -#ifdef CONFIG_CPU_LITTLE_ENDIAN -# ifdef CONFIG_CPU_SH2 -# define MODULE_PROC_FAMILY "SH2LE " -# elif defined CONFIG_CPU_SH3 -# define MODULE_PROC_FAMILY "SH3LE " -# elif defined CONFIG_CPU_SH4 -# define MODULE_PROC_FAMILY "SH4LE " -# elif defined CONFIG_CPU_SH5 -# define MODULE_PROC_FAMILY "SH5LE " -# else -# error unknown processor family -# endif -#else -# ifdef CONFIG_CPU_SH2 -# define MODULE_PROC_FAMILY "SH2BE " -# elif defined CONFIG_CPU_SH3 -# define MODULE_PROC_FAMILY "SH3BE " -# elif defined CONFIG_CPU_SH4 -# define MODULE_PROC_FAMILY "SH4BE " -# elif defined CONFIG_CPU_SH5 -# define MODULE_PROC_FAMILY "SH5BE " -# else -# error unknown processor family -# endif -#endif - -#define MODULE_ARCH_VERMAGIC MODULE_PROC_FAMILY - -#endif /* _ASM_SH_MODULE_H */ diff --git a/include/asm-sh/msgbuf.h b/include/asm-sh/msgbuf.h deleted file mode 100644 index 517432343fb..00000000000 --- a/include/asm-sh/msgbuf.h +++ /dev/null @@ -1,31 +0,0 @@ -#ifndef __ASM_SH_MSGBUF_H -#define __ASM_SH_MSGBUF_H - -/* - * The msqid64_ds structure for i386 architecture. - * Note extra padding because this structure is passed back and forth - * between kernel and user space. - * - * Pad space is left for: - * - 64-bit time_t to solve y2038 problem - * - 2 miscellaneous 32-bit values - */ - -struct msqid64_ds { - struct ipc64_perm msg_perm; - __kernel_time_t msg_stime; /* last msgsnd time */ - unsigned long __unused1; - __kernel_time_t msg_rtime; /* last msgrcv time */ - unsigned long __unused2; - __kernel_time_t msg_ctime; /* last change time */ - unsigned long __unused3; - unsigned long msg_cbytes; /* current number of bytes on queue */ - unsigned long msg_qnum; /* number of messages in queue */ - unsigned long msg_qbytes; /* max number of bytes on queue */ - __kernel_pid_t msg_lspid; /* pid of last msgsnd */ - __kernel_pid_t msg_lrpid; /* last receive pid */ - unsigned long __unused4; - unsigned long __unused5; -}; - -#endif /* __ASM_SH_MSGBUF_H */ diff --git a/include/asm-sh/mutex.h b/include/asm-sh/mutex.h deleted file mode 100644 index 458c1f7fbc1..00000000000 --- a/include/asm-sh/mutex.h +++ /dev/null @@ -1,9 +0,0 @@ -/* - * Pull in the generic implementation for the mutex fastpath. - * - * TODO: implement optimized primitives instead, or leave the generic - * implementation in place, or pick the atomic_xchg() based generic - * implementation. (see asm-generic/mutex-xchg.h for details) - */ - -#include diff --git a/include/asm-sh/page.h b/include/asm-sh/page.h deleted file mode 100644 index 77fb8bf02e4..00000000000 --- a/include/asm-sh/page.h +++ /dev/null @@ -1,183 +0,0 @@ -#ifndef __ASM_SH_PAGE_H -#define __ASM_SH_PAGE_H - -/* - * Copyright (C) 1999 Niibe Yutaka - */ - -#include - -/* PAGE_SHIFT determines the page size */ -#if defined(CONFIG_PAGE_SIZE_4KB) -# define PAGE_SHIFT 12 -#elif defined(CONFIG_PAGE_SIZE_8KB) -# define PAGE_SHIFT 13 -#elif defined(CONFIG_PAGE_SIZE_16KB) -# define PAGE_SHIFT 14 -#elif defined(CONFIG_PAGE_SIZE_64KB) -# define PAGE_SHIFT 16 -#else -# error "Bogus kernel page size?" -#endif - -#define PAGE_SIZE (_AC(1, UL) << PAGE_SHIFT) -#define PAGE_MASK (~(PAGE_SIZE-1)) -#define PTE_MASK PAGE_MASK - -#if defined(CONFIG_HUGETLB_PAGE_SIZE_64K) -#define HPAGE_SHIFT 16 -#elif defined(CONFIG_HUGETLB_PAGE_SIZE_256K) -#define HPAGE_SHIFT 18 -#elif defined(CONFIG_HUGETLB_PAGE_SIZE_1MB) -#define HPAGE_SHIFT 20 -#elif defined(CONFIG_HUGETLB_PAGE_SIZE_4MB) -#define HPAGE_SHIFT 22 -#elif defined(CONFIG_HUGETLB_PAGE_SIZE_64MB) -#define HPAGE_SHIFT 26 -#elif defined(CONFIG_HUGETLB_PAGE_SIZE_512MB) -#define HPAGE_SHIFT 29 -#endif - -#ifdef CONFIG_HUGETLB_PAGE -#define HPAGE_SIZE (1UL << HPAGE_SHIFT) -#define HPAGE_MASK (~(HPAGE_SIZE-1)) -#define HUGETLB_PAGE_ORDER (HPAGE_SHIFT-PAGE_SHIFT) -#endif - -#ifndef __ASSEMBLY__ - -extern unsigned long shm_align_mask; -extern unsigned long max_low_pfn, min_low_pfn; -extern unsigned long memory_start, memory_end; - -extern void clear_page(void *to); -extern void copy_page(void *to, void *from); - -#if !defined(CONFIG_CACHE_OFF) && defined(CONFIG_MMU) && \ - (defined(CONFIG_CPU_SH5) || defined(CONFIG_CPU_SH4) || \ - defined(CONFIG_SH7705_CACHE_32KB)) -struct page; -struct vm_area_struct; -extern void clear_user_page(void *to, unsigned long address, struct page *page); -extern void copy_user_page(void *to, void *from, unsigned long address, - struct page *page); -#if defined(CONFIG_CPU_SH4) -extern void copy_user_highpage(struct page *to, struct page *from, - unsigned long vaddr, struct vm_area_struct *vma); -#define __HAVE_ARCH_COPY_USER_HIGHPAGE -#endif -#else -#define clear_user_page(page, vaddr, pg) clear_page(page) -#define copy_user_page(to, from, vaddr, pg) copy_page(to, from) -#endif - -/* - * These are used to make use of C type-checking.. - */ -#ifdef CONFIG_X2TLB -typedef struct { unsigned long pte_low, pte_high; } pte_t; -typedef struct { unsigned long long pgprot; } pgprot_t; -typedef struct { unsigned long long pgd; } pgd_t; -#define pte_val(x) \ - ((x).pte_low | ((unsigned long long)(x).pte_high << 32)) -#define __pte(x) \ - ({ pte_t __pte = {(x), ((unsigned long long)(x)) >> 32}; __pte; }) -#elif defined(CONFIG_SUPERH32) -typedef struct { unsigned long pte_low; } pte_t; -typedef struct { unsigned long pgprot; } pgprot_t; -typedef struct { unsigned long pgd; } pgd_t; -#define pte_val(x) ((x).pte_low) -#define __pte(x) ((pte_t) { (x) } ) -#else -typedef struct { unsigned long long pte_low; } pte_t; -typedef struct { unsigned long pgprot; } pgprot_t; -typedef struct { unsigned long pgd; } pgd_t; -#define pte_val(x) ((x).pte_low) -#define __pte(x) ((pte_t) { (x) } ) -#endif - -#define pgd_val(x) ((x).pgd) -#define pgprot_val(x) ((x).pgprot) - -#define __pgd(x) ((pgd_t) { (x) } ) -#define __pgprot(x) ((pgprot_t) { (x) } ) - -typedef struct page *pgtable_t; - -#endif /* !__ASSEMBLY__ */ - -/* - * __MEMORY_START and SIZE are the physical addresses and size of RAM. - */ -#define __MEMORY_START CONFIG_MEMORY_START -#define __MEMORY_SIZE CONFIG_MEMORY_SIZE - -/* - * PAGE_OFFSET is the virtual address of the start of kernel address - * space. - */ -#define PAGE_OFFSET CONFIG_PAGE_OFFSET - -/* - * Virtual to physical RAM address translation. - * - * In 29 bit mode, the physical offset of RAM from address 0 is visible in - * the kernel virtual address space, and thus we don't have to take - * this into account when translating. However in 32 bit mode this offset - * is not visible (it is part of the PMB mapping) and so needs to be - * added or subtracted as required. - */ -#ifdef CONFIG_32BIT -#define __pa(x) ((unsigned long)(x)-PAGE_OFFSET+__MEMORY_START) -#define __va(x) ((void *)((unsigned long)(x)+PAGE_OFFSET-__MEMORY_START)) -#else -#define __pa(x) ((unsigned long)(x)-PAGE_OFFSET) -#define __va(x) ((void *)((unsigned long)(x)+PAGE_OFFSET)) -#endif - -#define pfn_to_kaddr(pfn) __va((pfn) << PAGE_SHIFT) -#define page_to_phys(page) (page_to_pfn(page) << PAGE_SHIFT) - -/* - * PFN = physical frame number (ie PFN 0 == physical address 0) - * PFN_START is the PFN of the first page of RAM. By defining this we - * don't have struct page entries for the portion of address space - * between physical address 0 and the start of RAM. - */ -#define PFN_START (__MEMORY_START >> PAGE_SHIFT) -#define ARCH_PFN_OFFSET (PFN_START) -#define virt_to_page(kaddr) pfn_to_page(__pa(kaddr) >> PAGE_SHIFT) -#ifdef CONFIG_FLATMEM -#define pfn_valid(pfn) ((pfn) >= min_low_pfn && (pfn) < max_low_pfn) -#endif -#define virt_addr_valid(kaddr) pfn_valid(__pa(kaddr) >> PAGE_SHIFT) - -#define VM_DATA_DEFAULT_FLAGS (VM_READ | VM_WRITE | VM_EXEC | \ - VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC) - -#include -#include - -/* vDSO support */ -#ifdef CONFIG_VSYSCALL -#define __HAVE_ARCH_GATE_AREA -#endif - -/* - * Some drivers need to perform DMA into kmalloc'ed buffers - * and so we have to increase the kmalloc minalign for this. - */ -#define ARCH_KMALLOC_MINALIGN L1_CACHE_BYTES - -#ifdef CONFIG_SUPERH64 -/* - * While BYTES_PER_WORD == 4 on the current sh64 ABI, GCC will still - * happily generate {ld/st}.q pairs, requiring us to have 8-byte - * alignment to avoid traps. The kmalloc alignment is gauranteed by - * virtue of L1_CACHE_BYTES, requiring this to only be special cased - * for slab caches. - */ -#define ARCH_SLAB_MINALIGN 8 -#endif - -#endif /* __ASM_SH_PAGE_H */ diff --git a/include/asm-sh/param.h b/include/asm-sh/param.h deleted file mode 100644 index ae245afdfd6..00000000000 --- a/include/asm-sh/param.h +++ /dev/null @@ -1,22 +0,0 @@ -#ifndef __ASM_SH_PARAM_H -#define __ASM_SH_PARAM_H - -#ifdef __KERNEL__ -# define HZ CONFIG_HZ -# define USER_HZ 100 /* User interfaces are in "ticks" */ -# define CLOCKS_PER_SEC (USER_HZ) /* frequency at which times() counts */ -#endif - -#ifndef HZ -#define HZ 100 -#endif - -#define EXEC_PAGESIZE 4096 - -#ifndef NOGROUP -#define NOGROUP (-1) -#endif - -#define MAXHOSTNAMELEN 64 /* max length of hostname */ - -#endif /* __ASM_SH_PARAM_H */ diff --git a/include/asm-sh/parport.h b/include/asm-sh/parport.h deleted file mode 100644 index f67ba60a2ac..00000000000 --- a/include/asm-sh/parport.h +++ /dev/null @@ -1,16 +0,0 @@ -/* - * Copyright (C) 1999, 2000 Tim Waugh - * - * This file should only be included by drivers/parport/parport_pc.c. - */ -#ifndef __ASM_SH_PARPORT_H -#define __ASM_SH_PARPORT_H - -static int __devinit parport_pc_find_isa_ports(int autoirq, int autodma); - -static int __devinit parport_pc_find_nonpci_ports(int autoirq, int autodma) -{ - return parport_pc_find_isa_ports(autoirq, autodma); -} - -#endif /* __ASM_SH_PARPORT_H */ diff --git a/include/asm-sh/pci.h b/include/asm-sh/pci.h deleted file mode 100644 index df1d383e18a..00000000000 --- a/include/asm-sh/pci.h +++ /dev/null @@ -1,144 +0,0 @@ -#ifndef __ASM_SH_PCI_H -#define __ASM_SH_PCI_H - -#ifdef __KERNEL__ - -#include - -/* Can be used to override the logic in pci_scan_bus for skipping - already-configured bus numbers - to be used for buggy BIOSes - or architectures with incomplete PCI setup by the loader */ - -#define pcibios_assign_all_busses() 1 -#define pcibios_scan_all_fns(a, b) 0 - -/* - * A board can define one or more PCI channels that represent built-in (or - * external) PCI controllers. - */ -struct pci_channel { - struct pci_ops *pci_ops; - struct resource *io_resource; - struct resource *mem_resource; - int first_devfn; - int last_devfn; -}; - -/* - * Each board initializes this array and terminates it with a NULL entry. - */ -extern struct pci_channel board_pci_channels[]; - -#define PCIBIOS_MIN_IO board_pci_channels->io_resource->start -#define PCIBIOS_MIN_MEM board_pci_channels->mem_resource->start - -/* - * I/O routine helpers - */ -#if defined(CONFIG_CPU_SUBTYPE_SH7780) || defined(CONFIG_CPU_SUBTYPE_SH7785) -#define PCI_IO_AREA 0xFE400000 -#define PCI_IO_SIZE 0x00400000 -#elif defined(CONFIG_CPU_SH5) -extern unsigned long PCI_IO_AREA; -#define PCI_IO_SIZE 0x00010000 -#else -#define PCI_IO_AREA 0xFE240000 -#define PCI_IO_SIZE 0x00040000 -#endif - -#define PCI_MEM_SIZE 0x01000000 - -#define SH4_PCIIOBR_MASK 0xFFFC0000 -#define pci_ioaddr(addr) (PCI_IO_AREA + (addr & ~SH4_PCIIOBR_MASK)) - -#if defined(CONFIG_PCI) -#define is_pci_ioaddr(port) \ - (((port) >= PCIBIOS_MIN_IO) && \ - ((port) < (PCIBIOS_MIN_IO + PCI_IO_SIZE))) -#define is_pci_memaddr(port) \ - (((port) >= PCIBIOS_MIN_MEM) && \ - ((port) < (PCIBIOS_MIN_MEM + PCI_MEM_SIZE))) -#else -#define is_pci_ioaddr(port) (0) -#define is_pci_memaddr(port) (0) -#endif - -struct pci_dev; - -extern void pcibios_set_master(struct pci_dev *dev); - -static inline void pcibios_penalize_isa_irq(int irq, int active) -{ - /* We don't do dynamic PCI IRQ allocation */ -} - -/* Dynamic DMA mapping stuff. - * SuperH has everything mapped statically like x86. - */ - -/* The PCI address space does equal the physical memory - * address space. The networking and block device layers use - * this boolean for bounce buffer decisions. - */ -#define PCI_DMA_BUS_IS_PHYS (1) - -#include -#include -#include -#include -#include - -/* pci_unmap_{single,page} being a nop depends upon the - * configuration. - */ -#ifdef CONFIG_SH_PCIDMA_NONCOHERENT -#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME) \ - dma_addr_t ADDR_NAME; -#define DECLARE_PCI_UNMAP_LEN(LEN_NAME) \ - __u32 LEN_NAME; -#define pci_unmap_addr(PTR, ADDR_NAME) \ - ((PTR)->ADDR_NAME) -#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL) \ - (((PTR)->ADDR_NAME) = (VAL)) -#define pci_unmap_len(PTR, LEN_NAME) \ - ((PTR)->LEN_NAME) -#define pci_unmap_len_set(PTR, LEN_NAME, VAL) \ - (((PTR)->LEN_NAME) = (VAL)) -#else -#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME) -#define DECLARE_PCI_UNMAP_LEN(LEN_NAME) -#define pci_unmap_addr(PTR, ADDR_NAME) (0) -#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL) do { } while (0) -#define pci_unmap_len(PTR, LEN_NAME) (0) -#define pci_unmap_len_set(PTR, LEN_NAME, VAL) do { } while (0) -#endif - -#ifdef CONFIG_PCI -static inline void pci_dma_burst_advice(struct pci_dev *pdev, - enum pci_dma_burst_strategy *strat, - unsigned long *strategy_parameter) -{ - *strat = PCI_DMA_BURST_INFINITY; - *strategy_parameter = ~0UL; -} -#endif - -/* Board-specific fixup routines. */ -void pcibios_fixup(void); -int pcibios_init_platform(void); -int pcibios_map_platform_irq(struct pci_dev *dev, u8 slot, u8 pin); - -#ifdef CONFIG_PCI_AUTO -int pciauto_assign_resources(int busno, struct pci_channel *hose); -#endif - -#endif /* __KERNEL__ */ - -/* generic pci stuff */ -#include - -/* generic DMA-mapping stuff */ -#include - -#endif /* __ASM_SH_PCI_H */ - diff --git a/include/asm-sh/percpu.h b/include/asm-sh/percpu.h deleted file mode 100644 index 4db4b39a439..00000000000 --- a/include/asm-sh/percpu.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef __ARCH_SH_PERCPU -#define __ARCH_SH_PERCPU - -#include - -#endif /* __ARCH_SH_PERCPU */ diff --git a/include/asm-sh/pgalloc.h b/include/asm-sh/pgalloc.h deleted file mode 100644 index 84dd2db7104..00000000000 --- a/include/asm-sh/pgalloc.h +++ /dev/null @@ -1,96 +0,0 @@ -#ifndef __ASM_SH_PGALLOC_H -#define __ASM_SH_PGALLOC_H - -#include -#include - -#define QUICK_PGD 0 /* We preserve special mappings over free */ -#define QUICK_PT 1 /* Other page table pages that are zero on free */ - -static inline void pmd_populate_kernel(struct mm_struct *mm, pmd_t *pmd, - pte_t *pte) -{ - set_pmd(pmd, __pmd((unsigned long)pte)); -} - -static inline void pmd_populate(struct mm_struct *mm, pmd_t *pmd, - pgtable_t pte) -{ - set_pmd(pmd, __pmd((unsigned long)page_address(pte))); -} -#define pmd_pgtable(pmd) pmd_page(pmd) - -static inline void pgd_ctor(void *x) -{ - pgd_t *pgd = x; - - memcpy(pgd + USER_PTRS_PER_PGD, - swapper_pg_dir + USER_PTRS_PER_PGD, - (PTRS_PER_PGD - USER_PTRS_PER_PGD) * sizeof(pgd_t)); -} - -/* - * Allocate and free page tables. - */ -static inline pgd_t *pgd_alloc(struct mm_struct *mm) -{ - return quicklist_alloc(QUICK_PGD, GFP_KERNEL | __GFP_REPEAT, pgd_ctor); -} - -static inline void pgd_free(struct mm_struct *mm, pgd_t *pgd) -{ - quicklist_free(QUICK_PGD, NULL, pgd); -} - -static inline pte_t *pte_alloc_one_kernel(struct mm_struct *mm, - unsigned long address) -{ - return quicklist_alloc(QUICK_PT, GFP_KERNEL | __GFP_REPEAT, NULL); -} - -static inline pgtable_t pte_alloc_one(struct mm_struct *mm, - unsigned long address) -{ - struct page *page; - void *pg; - - pg = quicklist_alloc(QUICK_PT, GFP_KERNEL | __GFP_REPEAT, NULL); - if (!pg) - return NULL; - page = virt_to_page(pg); - pgtable_page_ctor(page); - return page; -} - -static inline void pte_free_kernel(struct mm_struct *mm, pte_t *pte) -{ - quicklist_free(QUICK_PT, NULL, pte); -} - -static inline void pte_free(struct mm_struct *mm, pgtable_t pte) -{ - pgtable_page_dtor(pte); - quicklist_free_page(QUICK_PT, NULL, pte); -} - -#define __pte_free_tlb(tlb,pte) \ -do { \ - pgtable_page_dtor(pte); \ - tlb_remove_page((tlb), (pte)); \ -} while (0) - -/* - * allocating and freeing a pmd is trivial: the 1-entry pmd is - * inside the pgd, so has no extra memory associated with it. - */ - -#define pmd_free(mm, x) do { } while (0) -#define __pmd_free_tlb(tlb,x) do { } while (0) - -static inline void check_pgt_cache(void) -{ - quicklist_trim(QUICK_PGD, NULL, 25, 16); - quicklist_trim(QUICK_PT, NULL, 25, 16); -} - -#endif /* __ASM_SH_PGALLOC_H */ diff --git a/include/asm-sh/pgtable.h b/include/asm-sh/pgtable.h deleted file mode 100644 index a4a8f8b9346..00000000000 --- a/include/asm-sh/pgtable.h +++ /dev/null @@ -1,152 +0,0 @@ -/* - * This file contains the functions and defines necessary to modify and - * use the SuperH page table tree. - * - * Copyright (C) 1999 Niibe Yutaka - * Copyright (C) 2002 - 2007 Paul Mundt - * - * This file is subject to the terms and conditions of the GNU General - * Public License. See the file "COPYING" in the main directory of this - * archive for more details. - */ -#ifndef __ASM_SH_PGTABLE_H -#define __ASM_SH_PGTABLE_H - -#include -#include - -#ifndef __ASSEMBLY__ -#include -#include - -/* - * ZERO_PAGE is a global shared page that is always zero: used - * for zero-mapped memory areas etc.. - */ -extern unsigned long empty_zero_page[PAGE_SIZE / sizeof(unsigned long)]; -#define ZERO_PAGE(vaddr) (virt_to_page(empty_zero_page)) - -#endif /* !__ASSEMBLY__ */ - -/* - * Effective and physical address definitions, to aid with sign - * extension. - */ -#define NEFF 32 -#define NEFF_SIGN (1LL << (NEFF - 1)) -#define NEFF_MASK (-1LL << NEFF) - -#ifdef CONFIG_29BIT -#define NPHYS 29 -#else -#define NPHYS 32 -#endif - -#define NPHYS_SIGN (1LL << (NPHYS - 1)) -#define NPHYS_MASK (-1LL << NPHYS) - -/* - * traditional two-level paging structure - */ -/* PTE bits */ -#if defined(CONFIG_X2TLB) || defined(CONFIG_SUPERH64) -# define PTE_MAGNITUDE 3 /* 64-bit PTEs on extended mode SH-X2 TLB */ -#else -# define PTE_MAGNITUDE 2 /* 32-bit PTEs */ -#endif -#define PTE_SHIFT PAGE_SHIFT -#define PTE_BITS (PTE_SHIFT - PTE_MAGNITUDE) - -/* PGD bits */ -#define PGDIR_SHIFT (PTE_SHIFT + PTE_BITS) -#define PGDIR_SIZE (1UL << PGDIR_SHIFT) -#define PGDIR_MASK (~(PGDIR_SIZE-1)) - -/* Entries per level */ -#define PTRS_PER_PTE (PAGE_SIZE / (1 << PTE_MAGNITUDE)) -#define PTRS_PER_PGD (PAGE_SIZE / sizeof(pgd_t)) - -#define USER_PTRS_PER_PGD (TASK_SIZE/PGDIR_SIZE) -#define FIRST_USER_ADDRESS 0 - -#ifdef CONFIG_32BIT -#define PHYS_ADDR_MASK 0xffffffff -#else -#define PHYS_ADDR_MASK 0x1fffffff -#endif - -#define PTE_PHYS_MASK (PHYS_ADDR_MASK & PAGE_MASK) - -#ifdef CONFIG_SUPERH32 -#define VMALLOC_START (P3SEG) -#else -#define VMALLOC_START (0xf0000000) -#endif -#define VMALLOC_END (FIXADDR_START-2*PAGE_SIZE) - -#if defined(CONFIG_SUPERH32) -#include -#else -#include -#endif - -/* - * SH-X and lower (legacy) SuperH parts (SH-3, SH-4, some SH-4A) can't do page - * protection for execute, and considers it the same as a read. Also, write - * permission implies read permission. This is the closest we can get.. - * - * SH-X2 (SH7785) and later parts take this to the opposite end of the extreme, - * not only supporting separate execute, read, and write bits, but having - * completely separate permission bits for user and kernel space. - */ - /*xwr*/ -#define __P000 PAGE_NONE -#define __P001 PAGE_READONLY -#define __P010 PAGE_COPY -#define __P011 PAGE_COPY -#define __P100 PAGE_EXECREAD -#define __P101 PAGE_EXECREAD -#define __P110 PAGE_COPY -#define __P111 PAGE_COPY - -#define __S000 PAGE_NONE -#define __S001 PAGE_READONLY -#define __S010 PAGE_WRITEONLY -#define __S011 PAGE_SHARED -#define __S100 PAGE_EXECREAD -#define __S101 PAGE_EXECREAD -#define __S110 PAGE_RWX -#define __S111 PAGE_RWX - -typedef pte_t *pte_addr_t; - -#define kern_addr_valid(addr) (1) - -#define io_remap_pfn_range(vma, vaddr, pfn, size, prot) \ - remap_pfn_range(vma, vaddr, pfn, size, prot) - -#define pte_pfn(x) ((unsigned long)(((x).pte_low >> PAGE_SHIFT))) - -/* - * No page table caches to initialise - */ -#define pgtable_cache_init() do { } while (0) - -#if !defined(CONFIG_CACHE_OFF) && (defined(CONFIG_CPU_SH4) || \ - defined(CONFIG_SH7705_CACHE_32KB)) -struct mm_struct; -#define __HAVE_ARCH_PTEP_GET_AND_CLEAR -pte_t ptep_get_and_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep); -#endif - -struct vm_area_struct; -extern void update_mmu_cache(struct vm_area_struct * vma, - unsigned long address, pte_t pte); -extern pgd_t swapper_pg_dir[PTRS_PER_PGD]; -extern void paging_init(void); -extern void page_table_range_init(unsigned long start, unsigned long end, - pgd_t *pgd); - -#include - -#endif /* __ASM_SH_PGTABLE_H */ diff --git a/include/asm-sh/pgtable_32.h b/include/asm-sh/pgtable_32.h deleted file mode 100644 index 72ea209195b..00000000000 --- a/include/asm-sh/pgtable_32.h +++ /dev/null @@ -1,479 +0,0 @@ -#ifndef __ASM_SH_PGTABLE_32_H -#define __ASM_SH_PGTABLE_32_H - -/* - * Linux PTEL encoding. - * - * Hardware and software bit definitions for the PTEL value (see below for - * notes on SH-X2 MMUs and 64-bit PTEs): - * - * - Bits 0 and 7 are reserved on SH-3 (_PAGE_WT and _PAGE_SZ1 on SH-4). - * - * - Bit 1 is the SH-bit, but is unused on SH-3 due to an MMU bug (the - * hardware PTEL value can't have the SH-bit set when MMUCR.IX is set, - * which is the default in cpu-sh3/mmu_context.h:MMU_CONTROL_INIT). - * - * In order to keep this relatively clean, do not use these for defining - * SH-3 specific flags until all of the other unused bits have been - * exhausted. - * - * - Bit 9 is reserved by everyone and used by _PAGE_PROTNONE. - * - * - Bits 10 and 11 are low bits of the PPN that are reserved on >= 4K pages. - * Bit 10 is used for _PAGE_ACCESSED, bit 11 remains unused. - * - * - On 29 bit platforms, bits 31 to 29 are used for the space attributes - * and timing control which (together with bit 0) are moved into the - * old-style PTEA on the parts that support it. - * - * XXX: Leave the _PAGE_FILE and _PAGE_WT overhaul for a rainy day. - * - * SH-X2 MMUs and extended PTEs - * - * SH-X2 supports an extended mode TLB with split data arrays due to the - * number of bits needed for PR and SZ (now EPR and ESZ) encodings. The PR and - * SZ bit placeholders still exist in data array 1, but are implemented as - * reserved bits, with the real logic existing in data array 2. - * - * The downside to this is that we can no longer fit everything in to a 32-bit - * PTE encoding, so a 64-bit pte_t is necessary for these parts. On the plus - * side, this gives us quite a few spare bits to play with for future usage. - */ -/* Legacy and compat mode bits */ -#define _PAGE_WT 0x001 /* WT-bit on SH-4, 0 on SH-3 */ -#define _PAGE_HW_SHARED 0x002 /* SH-bit : shared among processes */ -#define _PAGE_DIRTY 0x004 /* D-bit : page changed */ -#define _PAGE_CACHABLE 0x008 /* C-bit : cachable */ -#define _PAGE_SZ0 0x010 /* SZ0-bit : Size of page */ -#define _PAGE_RW 0x020 /* PR0-bit : write access allowed */ -#define _PAGE_USER 0x040 /* PR1-bit : user space access allowed*/ -#define _PAGE_SZ1 0x080 /* SZ1-bit : Size of page (on SH-4) */ -#define _PAGE_PRESENT 0x100 /* V-bit : page is valid */ -#define _PAGE_PROTNONE 0x200 /* software: if not present */ -#define _PAGE_ACCESSED 0x400 /* software: page referenced */ -#define _PAGE_FILE _PAGE_WT /* software: pagecache or swap? */ - -#define _PAGE_SZ_MASK (_PAGE_SZ0 | _PAGE_SZ1) -#define _PAGE_PR_MASK (_PAGE_RW | _PAGE_USER) - -/* Extended mode bits */ -#define _PAGE_EXT_ESZ0 0x0010 /* ESZ0-bit: Size of page */ -#define _PAGE_EXT_ESZ1 0x0020 /* ESZ1-bit: Size of page */ -#define _PAGE_EXT_ESZ2 0x0040 /* ESZ2-bit: Size of page */ -#define _PAGE_EXT_ESZ3 0x0080 /* ESZ3-bit: Size of page */ - -#define _PAGE_EXT_USER_EXEC 0x0100 /* EPR0-bit: User space executable */ -#define _PAGE_EXT_USER_WRITE 0x0200 /* EPR1-bit: User space writable */ -#define _PAGE_EXT_USER_READ 0x0400 /* EPR2-bit: User space readable */ - -#define _PAGE_EXT_KERN_EXEC 0x0800 /* EPR3-bit: Kernel space executable */ -#define _PAGE_EXT_KERN_WRITE 0x1000 /* EPR4-bit: Kernel space writable */ -#define _PAGE_EXT_KERN_READ 0x2000 /* EPR5-bit: Kernel space readable */ - -/* Wrapper for extended mode pgprot twiddling */ -#define _PAGE_EXT(x) ((unsigned long long)(x) << 32) - -/* software: moves to PTEA.TC (Timing Control) */ -#define _PAGE_PCC_AREA5 0x00000000 /* use BSC registers for area5 */ -#define _PAGE_PCC_AREA6 0x80000000 /* use BSC registers for area6 */ - -/* software: moves to PTEA.SA[2:0] (Space Attributes) */ -#define _PAGE_PCC_IODYN 0x00000001 /* IO space, dynamically sized bus */ -#define _PAGE_PCC_IO8 0x20000000 /* IO space, 8 bit bus */ -#define _PAGE_PCC_IO16 0x20000001 /* IO space, 16 bit bus */ -#define _PAGE_PCC_COM8 0x40000000 /* Common Memory space, 8 bit bus */ -#define _PAGE_PCC_COM16 0x40000001 /* Common Memory space, 16 bit bus */ -#define _PAGE_PCC_ATR8 0x60000000 /* Attribute Memory space, 8 bit bus */ -#define _PAGE_PCC_ATR16 0x60000001 /* Attribute Memory space, 6 bit bus */ - -/* Mask which drops unused bits from the PTEL value */ -#if defined(CONFIG_CPU_SH3) -#define _PAGE_CLEAR_FLAGS (_PAGE_PROTNONE | _PAGE_ACCESSED| \ - _PAGE_FILE | _PAGE_SZ1 | \ - _PAGE_HW_SHARED) -#elif defined(CONFIG_X2TLB) -/* Get rid of the legacy PR/SZ bits when using extended mode */ -#define _PAGE_CLEAR_FLAGS (_PAGE_PROTNONE | _PAGE_ACCESSED | \ - _PAGE_FILE | _PAGE_PR_MASK | _PAGE_SZ_MASK) -#else -#define _PAGE_CLEAR_FLAGS (_PAGE_PROTNONE | _PAGE_ACCESSED | _PAGE_FILE) -#endif - -#define _PAGE_FLAGS_HARDWARE_MASK (PHYS_ADDR_MASK & ~(_PAGE_CLEAR_FLAGS)) - -/* Hardware flags, page size encoding */ -#if !defined(CONFIG_MMU) -# define _PAGE_FLAGS_HARD 0ULL -#elif defined(CONFIG_X2TLB) -# if defined(CONFIG_PAGE_SIZE_4KB) -# define _PAGE_FLAGS_HARD _PAGE_EXT(_PAGE_EXT_ESZ0) -# elif defined(CONFIG_PAGE_SIZE_8KB) -# define _PAGE_FLAGS_HARD _PAGE_EXT(_PAGE_EXT_ESZ1) -# elif defined(CONFIG_PAGE_SIZE_64KB) -# define _PAGE_FLAGS_HARD _PAGE_EXT(_PAGE_EXT_ESZ2) -# endif -#else -# if defined(CONFIG_PAGE_SIZE_4KB) -# define _PAGE_FLAGS_HARD _PAGE_SZ0 -# elif defined(CONFIG_PAGE_SIZE_64KB) -# define _PAGE_FLAGS_HARD _PAGE_SZ1 -# endif -#endif - -#if defined(CONFIG_X2TLB) -# if defined(CONFIG_HUGETLB_PAGE_SIZE_64K) -# define _PAGE_SZHUGE (_PAGE_EXT_ESZ2) -# elif defined(CONFIG_HUGETLB_PAGE_SIZE_256K) -# define _PAGE_SZHUGE (_PAGE_EXT_ESZ0 | _PAGE_EXT_ESZ2) -# elif defined(CONFIG_HUGETLB_PAGE_SIZE_1MB) -# define _PAGE_SZHUGE (_PAGE_EXT_ESZ0 | _PAGE_EXT_ESZ1 | _PAGE_EXT_ESZ2) -# elif defined(CONFIG_HUGETLB_PAGE_SIZE_4MB) -# define _PAGE_SZHUGE (_PAGE_EXT_ESZ3) -# elif defined(CONFIG_HUGETLB_PAGE_SIZE_64MB) -# define _PAGE_SZHUGE (_PAGE_EXT_ESZ2 | _PAGE_EXT_ESZ3) -# endif -#else -# if defined(CONFIG_HUGETLB_PAGE_SIZE_64K) -# define _PAGE_SZHUGE (_PAGE_SZ1) -# elif defined(CONFIG_HUGETLB_PAGE_SIZE_1MB) -# define _PAGE_SZHUGE (_PAGE_SZ0 | _PAGE_SZ1) -# endif -#endif - -/* - * Stub out _PAGE_SZHUGE if we don't have a good definition for it, - * to make pte_mkhuge() happy. - */ -#ifndef _PAGE_SZHUGE -# define _PAGE_SZHUGE (_PAGE_FLAGS_HARD) -#endif - -#define _PAGE_CHG_MASK \ - (PTE_MASK | _PAGE_ACCESSED | _PAGE_CACHABLE | _PAGE_DIRTY) - -#ifndef __ASSEMBLY__ - -#if defined(CONFIG_X2TLB) /* SH-X2 TLB */ -#define PAGE_NONE __pgprot(_PAGE_PROTNONE | _PAGE_CACHABLE | \ - _PAGE_ACCESSED | _PAGE_FLAGS_HARD) - -#define PAGE_SHARED __pgprot(_PAGE_PRESENT | _PAGE_ACCESSED | \ - _PAGE_CACHABLE | _PAGE_FLAGS_HARD | \ - _PAGE_EXT(_PAGE_EXT_KERN_READ | \ - _PAGE_EXT_KERN_WRITE | \ - _PAGE_EXT_USER_READ | \ - _PAGE_EXT_USER_WRITE)) - -#define PAGE_EXECREAD __pgprot(_PAGE_PRESENT | _PAGE_ACCESSED | \ - _PAGE_CACHABLE | _PAGE_FLAGS_HARD | \ - _PAGE_EXT(_PAGE_EXT_KERN_EXEC | \ - _PAGE_EXT_KERN_READ | \ - _PAGE_EXT_USER_EXEC | \ - _PAGE_EXT_USER_READ)) - -#define PAGE_COPY PAGE_EXECREAD - -#define PAGE_READONLY __pgprot(_PAGE_PRESENT | _PAGE_ACCESSED | \ - _PAGE_CACHABLE | _PAGE_FLAGS_HARD | \ - _PAGE_EXT(_PAGE_EXT_KERN_READ | \ - _PAGE_EXT_USER_READ)) - -#define PAGE_WRITEONLY __pgprot(_PAGE_PRESENT | _PAGE_ACCESSED | \ - _PAGE_CACHABLE | _PAGE_FLAGS_HARD | \ - _PAGE_EXT(_PAGE_EXT_KERN_WRITE | \ - _PAGE_EXT_USER_WRITE)) - -#define PAGE_RWX __pgprot(_PAGE_PRESENT | _PAGE_ACCESSED | \ - _PAGE_CACHABLE | _PAGE_FLAGS_HARD | \ - _PAGE_EXT(_PAGE_EXT_KERN_WRITE | \ - _PAGE_EXT_KERN_READ | \ - _PAGE_EXT_KERN_EXEC | \ - _PAGE_EXT_USER_WRITE | \ - _PAGE_EXT_USER_READ | \ - _PAGE_EXT_USER_EXEC)) - -#define PAGE_KERNEL __pgprot(_PAGE_PRESENT | _PAGE_CACHABLE | \ - _PAGE_DIRTY | _PAGE_ACCESSED | \ - _PAGE_HW_SHARED | _PAGE_FLAGS_HARD | \ - _PAGE_EXT(_PAGE_EXT_KERN_READ | \ - _PAGE_EXT_KERN_WRITE | \ - _PAGE_EXT_KERN_EXEC)) - -#define PAGE_KERNEL_NOCACHE \ - __pgprot(_PAGE_PRESENT | _PAGE_DIRTY | \ - _PAGE_ACCESSED | _PAGE_HW_SHARED | \ - _PAGE_FLAGS_HARD | \ - _PAGE_EXT(_PAGE_EXT_KERN_READ | \ - _PAGE_EXT_KERN_WRITE | \ - _PAGE_EXT_KERN_EXEC)) - -#define PAGE_KERNEL_RO __pgprot(_PAGE_PRESENT | _PAGE_CACHABLE | \ - _PAGE_DIRTY | _PAGE_ACCESSED | \ - _PAGE_HW_SHARED | _PAGE_FLAGS_HARD | \ - _PAGE_EXT(_PAGE_EXT_KERN_READ | \ - _PAGE_EXT_KERN_EXEC)) - -#define PAGE_KERNEL_PCC(slot, type) \ - __pgprot(_PAGE_PRESENT | _PAGE_DIRTY | \ - _PAGE_ACCESSED | _PAGE_FLAGS_HARD | \ - _PAGE_EXT(_PAGE_EXT_KERN_READ | \ - _PAGE_EXT_KERN_WRITE | \ - _PAGE_EXT_KERN_EXEC) \ - (slot ? _PAGE_PCC_AREA5 : _PAGE_PCC_AREA6) | \ - (type)) - -#elif defined(CONFIG_MMU) /* SH-X TLB */ -#define PAGE_NONE __pgprot(_PAGE_PROTNONE | _PAGE_CACHABLE | \ - _PAGE_ACCESSED | _PAGE_FLAGS_HARD) - -#define PAGE_SHARED __pgprot(_PAGE_PRESENT | _PAGE_RW | _PAGE_USER | \ - _PAGE_CACHABLE | _PAGE_ACCESSED | \ - _PAGE_FLAGS_HARD) - -#define PAGE_COPY __pgprot(_PAGE_PRESENT | _PAGE_USER | _PAGE_CACHABLE | \ - _PAGE_ACCESSED | _PAGE_FLAGS_HARD) - -#define PAGE_READONLY __pgprot(_PAGE_PRESENT | _PAGE_USER | _PAGE_CACHABLE | \ - _PAGE_ACCESSED | _PAGE_FLAGS_HARD) - -#define PAGE_EXECREAD PAGE_READONLY -#define PAGE_RWX PAGE_SHARED -#define PAGE_WRITEONLY PAGE_SHARED - -#define PAGE_KERNEL __pgprot(_PAGE_PRESENT | _PAGE_RW | _PAGE_CACHABLE | \ - _PAGE_DIRTY | _PAGE_ACCESSED | \ - _PAGE_HW_SHARED | _PAGE_FLAGS_HARD) - -#define PAGE_KERNEL_NOCACHE \ - __pgprot(_PAGE_PRESENT | _PAGE_RW | _PAGE_DIRTY | \ - _PAGE_ACCESSED | _PAGE_HW_SHARED | \ - _PAGE_FLAGS_HARD) - -#define PAGE_KERNEL_RO __pgprot(_PAGE_PRESENT | _PAGE_CACHABLE | \ - _PAGE_DIRTY | _PAGE_ACCESSED | \ - _PAGE_HW_SHARED | _PAGE_FLAGS_HARD) - -#define PAGE_KERNEL_PCC(slot, type) \ - __pgprot(_PAGE_PRESENT | _PAGE_RW | _PAGE_DIRTY | \ - _PAGE_ACCESSED | _PAGE_FLAGS_HARD | \ - (slot ? _PAGE_PCC_AREA5 : _PAGE_PCC_AREA6) | \ - (type)) -#else /* no mmu */ -#define PAGE_NONE __pgprot(0) -#define PAGE_SHARED __pgprot(0) -#define PAGE_COPY __pgprot(0) -#define PAGE_EXECREAD __pgprot(0) -#define PAGE_RWX __pgprot(0) -#define PAGE_READONLY __pgprot(0) -#define PAGE_WRITEONLY __pgprot(0) -#define PAGE_KERNEL __pgprot(0) -#define PAGE_KERNEL_NOCACHE __pgprot(0) -#define PAGE_KERNEL_RO __pgprot(0) - -#define PAGE_KERNEL_PCC(slot, type) \ - __pgprot(0) -#endif - -#endif /* __ASSEMBLY__ */ - -#ifndef __ASSEMBLY__ - -/* - * Certain architectures need to do special things when PTEs - * within a page table are directly modified. Thus, the following - * hook is made available. - */ -#ifdef CONFIG_X2TLB -static inline void set_pte(pte_t *ptep, pte_t pte) -{ - ptep->pte_high = pte.pte_high; - smp_wmb(); - ptep->pte_low = pte.pte_low; -} -#else -#define set_pte(pteptr, pteval) (*(pteptr) = pteval) -#endif - -#define set_pte_at(mm,addr,ptep,pteval) set_pte(ptep,pteval) - -/* - * (pmds are folded into pgds so this doesn't get actually called, - * but the define is needed for a generic inline function.) - */ -#define set_pmd(pmdptr, pmdval) (*(pmdptr) = pmdval) - -#define pfn_pte(pfn, prot) \ - __pte(((unsigned long long)(pfn) << PAGE_SHIFT) | pgprot_val(prot)) -#define pfn_pmd(pfn, prot) \ - __pmd(((unsigned long long)(pfn) << PAGE_SHIFT) | pgprot_val(prot)) - -#define pte_none(x) (!pte_val(x)) -#define pte_present(x) ((x).pte_low & (_PAGE_PRESENT | _PAGE_PROTNONE)) - -#define pte_clear(mm,addr,xp) do { set_pte_at(mm, addr, xp, __pte(0)); } while (0) - -#define pmd_none(x) (!pmd_val(x)) -#define pmd_present(x) (pmd_val(x)) -#define pmd_clear(xp) do { set_pmd(xp, __pmd(0)); } while (0) -#define pmd_bad(x) (pmd_val(x) & ~PAGE_MASK) - -#define pages_to_mb(x) ((x) >> (20-PAGE_SHIFT)) -#define pte_page(x) pfn_to_page(pte_pfn(x)) - -/* - * The following only work if pte_present() is true. - * Undefined behaviour if not.. - */ -#define pte_not_present(pte) (!((pte).pte_low & _PAGE_PRESENT)) -#define pte_dirty(pte) ((pte).pte_low & _PAGE_DIRTY) -#define pte_young(pte) ((pte).pte_low & _PAGE_ACCESSED) -#define pte_file(pte) ((pte).pte_low & _PAGE_FILE) -#define pte_special(pte) (0) - -#ifdef CONFIG_X2TLB -#define pte_write(pte) ((pte).pte_high & _PAGE_EXT_USER_WRITE) -#else -#define pte_write(pte) ((pte).pte_low & _PAGE_RW) -#endif - -#define PTE_BIT_FUNC(h,fn,op) \ -static inline pte_t pte_##fn(pte_t pte) { pte.pte_##h op; return pte; } - -#ifdef CONFIG_X2TLB -/* - * We cheat a bit in the SH-X2 TLB case. As the permission bits are - * individually toggled (and user permissions are entirely decoupled from - * kernel permissions), we attempt to couple them a bit more sanely here. - */ -PTE_BIT_FUNC(high, wrprotect, &= ~_PAGE_EXT_USER_WRITE); -PTE_BIT_FUNC(high, mkwrite, |= _PAGE_EXT_USER_WRITE | _PAGE_EXT_KERN_WRITE); -PTE_BIT_FUNC(high, mkhuge, |= _PAGE_SZHUGE); -#else -PTE_BIT_FUNC(low, wrprotect, &= ~_PAGE_RW); -PTE_BIT_FUNC(low, mkwrite, |= _PAGE_RW); -PTE_BIT_FUNC(low, mkhuge, |= _PAGE_SZHUGE); -#endif - -PTE_BIT_FUNC(low, mkclean, &= ~_PAGE_DIRTY); -PTE_BIT_FUNC(low, mkdirty, |= _PAGE_DIRTY); -PTE_BIT_FUNC(low, mkold, &= ~_PAGE_ACCESSED); -PTE_BIT_FUNC(low, mkyoung, |= _PAGE_ACCESSED); - -static inline pte_t pte_mkspecial(pte_t pte) { return pte; } - -/* - * Macro and implementation to make a page protection as uncachable. - */ -#define pgprot_writecombine(prot) \ - __pgprot(pgprot_val(prot) & ~_PAGE_CACHABLE) - -#define pgprot_noncached pgprot_writecombine - -/* - * Conversion functions: convert a page and protection to a page entry, - * and a page entry and page directory to the page they refer to. - * - * extern pte_t mk_pte(struct page *page, pgprot_t pgprot) - */ -#define mk_pte(page, pgprot) pfn_pte(page_to_pfn(page), (pgprot)) - -static inline pte_t pte_modify(pte_t pte, pgprot_t newprot) -{ - pte.pte_low &= _PAGE_CHG_MASK; - pte.pte_low |= pgprot_val(newprot); - -#ifdef CONFIG_X2TLB - pte.pte_high |= pgprot_val(newprot) >> 32; -#endif - - return pte; -} - -#define pmd_page_vaddr(pmd) ((unsigned long)pmd_val(pmd)) -#define pmd_page(pmd) (virt_to_page(pmd_val(pmd))) - -/* to find an entry in a page-table-directory. */ -#define pgd_index(address) (((address) >> PGDIR_SHIFT) & (PTRS_PER_PGD-1)) -#define pgd_offset(mm, address) ((mm)->pgd+pgd_index(address)) - -/* to find an entry in a kernel page-table-directory */ -#define pgd_offset_k(address) pgd_offset(&init_mm, address) - -/* Find an entry in the third-level page table.. */ -#define pte_index(address) ((address >> PAGE_SHIFT) & (PTRS_PER_PTE - 1)) -#define pte_offset_kernel(dir, address) \ - ((pte_t *) pmd_page_vaddr(*(dir)) + pte_index(address)) -#define pte_offset_map(dir, address) pte_offset_kernel(dir, address) -#define pte_offset_map_nested(dir, address) pte_offset_kernel(dir, address) - -#define pte_unmap(pte) do { } while (0) -#define pte_unmap_nested(pte) do { } while (0) - -#ifdef CONFIG_X2TLB -#define pte_ERROR(e) \ - printk("%s:%d: bad pte %p(%08lx%08lx).\n", __FILE__, __LINE__, \ - &(e), (e).pte_high, (e).pte_low) -#define pgd_ERROR(e) \ - printk("%s:%d: bad pgd %016llx.\n", __FILE__, __LINE__, pgd_val(e)) -#else -#define pte_ERROR(e) \ - printk("%s:%d: bad pte %08lx.\n", __FILE__, __LINE__, pte_val(e)) -#define pgd_ERROR(e) \ - printk("%s:%d: bad pgd %08lx.\n", __FILE__, __LINE__, pgd_val(e)) -#endif - -/* - * Encode and de-code a swap entry - * - * Constraints: - * _PAGE_FILE at bit 0 - * _PAGE_PRESENT at bit 8 - * _PAGE_PROTNONE at bit 9 - * - * For the normal case, we encode the swap type into bits 0:7 and the - * swap offset into bits 10:30. For the 64-bit PTE case, we keep the - * preserved bits in the low 32-bits and use the upper 32 as the swap - * offset (along with a 5-bit type), following the same approach as x86 - * PAE. This keeps the logic quite simple, and allows for a full 32 - * PTE_FILE_MAX_BITS, as opposed to the 29-bits we're constrained with - * in the pte_low case. - * - * As is evident by the Alpha code, if we ever get a 64-bit unsigned - * long (swp_entry_t) to match up with the 64-bit PTEs, this all becomes - * much cleaner.. - * - * NOTE: We should set ZEROs at the position of _PAGE_PRESENT - * and _PAGE_PROTNONE bits - */ -#ifdef CONFIG_X2TLB -#define __swp_type(x) ((x).val & 0x1f) -#define __swp_offset(x) ((x).val >> 5) -#define __swp_entry(type, offset) ((swp_entry_t){ (type) | (offset) << 5}) -#define __pte_to_swp_entry(pte) ((swp_entry_t){ (pte).pte_high }) -#define __swp_entry_to_pte(x) ((pte_t){ 0, (x).val }) - -/* - * Encode and decode a nonlinear file mapping entry - */ -#define pte_to_pgoff(pte) ((pte).pte_high) -#define pgoff_to_pte(off) ((pte_t) { _PAGE_FILE, (off) }) - -#define PTE_FILE_MAX_BITS 32 -#else -#define __swp_type(x) ((x).val & 0xff) -#define __swp_offset(x) ((x).val >> 10) -#define __swp_entry(type, offset) ((swp_entry_t){(type) | (offset) <<10}) - -#define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) >> 1 }) -#define __swp_entry_to_pte(x) ((pte_t) { (x).val << 1 }) - -/* - * Encode and decode a nonlinear file mapping entry - */ -#define PTE_FILE_MAX_BITS 29 -#define pte_to_pgoff(pte) (pte_val(pte) >> 1) -#define pgoff_to_pte(off) ((pte_t) { ((off) << 1) | _PAGE_FILE }) -#endif - -#endif /* __ASSEMBLY__ */ -#endif /* __ASM_SH_PGTABLE_32_H */ diff --git a/include/asm-sh/pgtable_64.h b/include/asm-sh/pgtable_64.h deleted file mode 100644 index c78990cda55..00000000000 --- a/include/asm-sh/pgtable_64.h +++ /dev/null @@ -1,314 +0,0 @@ -#ifndef __ASM_SH_PGTABLE_64_H -#define __ASM_SH_PGTABLE_64_H - -/* - * include/asm-sh/pgtable_64.h - * - * This file contains the functions and defines necessary to modify and use - * the SuperH page table tree. - * - * Copyright (C) 2000, 2001 Paolo Alberelli - * Copyright (C) 2003, 2004 Paul Mundt - * Copyright (C) 2003, 2004 Richard Curnow - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ -#include -#include -#include - -/* - * Error outputs. - */ -#define pte_ERROR(e) \ - printk("%s:%d: bad pte %016Lx.\n", __FILE__, __LINE__, pte_val(e)) -#define pgd_ERROR(e) \ - printk("%s:%d: bad pgd %08lx.\n", __FILE__, __LINE__, pgd_val(e)) - -/* - * Table setting routines. Used within arch/mm only. - */ -#define set_pmd(pmdptr, pmdval) (*(pmdptr) = pmdval) - -static __inline__ void set_pte(pte_t *pteptr, pte_t pteval) -{ - unsigned long long x = ((unsigned long long) pteval.pte_low); - unsigned long long *xp = (unsigned long long *) pteptr; - /* - * Sign-extend based on NPHYS. - */ - *(xp) = (x & NPHYS_SIGN) ? (x | NPHYS_MASK) : x; -} -#define set_pte_at(mm,addr,ptep,pteval) set_pte(ptep,pteval) - -static __inline__ void pmd_set(pmd_t *pmdp,pte_t *ptep) -{ - pmd_val(*pmdp) = (unsigned long) ptep; -} - -/* - * PGD defines. Top level. - */ - -/* To find an entry in a generic PGD. */ -#define pgd_index(address) (((address) >> PGDIR_SHIFT) & (PTRS_PER_PGD-1)) -#define __pgd_offset(address) pgd_index(address) -#define pgd_offset(mm, address) ((mm)->pgd+pgd_index(address)) - -/* To find an entry in a kernel PGD. */ -#define pgd_offset_k(address) pgd_offset(&init_mm, address) - -/* - * PMD level access routines. Same notes as above. - */ -#define _PMD_EMPTY 0x0 -/* Either the PMD is empty or present, it's not paged out */ -#define pmd_present(pmd_entry) (pmd_val(pmd_entry) & _PAGE_PRESENT) -#define pmd_clear(pmd_entry_p) (set_pmd((pmd_entry_p), __pmd(_PMD_EMPTY))) -#define pmd_none(pmd_entry) (pmd_val((pmd_entry)) == _PMD_EMPTY) -#define pmd_bad(pmd_entry) ((pmd_val(pmd_entry) & (~PAGE_MASK & ~_PAGE_USER)) != _KERNPG_TABLE) - -#define pmd_page_vaddr(pmd_entry) \ - ((unsigned long) __va(pmd_val(pmd_entry) & PAGE_MASK)) - -#define pmd_page(pmd) \ - (virt_to_page(pmd_val(pmd))) - -/* PMD to PTE dereferencing */ -#define pte_index(address) \ - ((address >> PAGE_SHIFT) & (PTRS_PER_PTE - 1)) - -#define pte_offset_kernel(dir, addr) \ - ((pte_t *) ((pmd_val(*(dir))) & PAGE_MASK) + pte_index((addr))) - -#define pte_offset_map(dir,addr) pte_offset_kernel(dir, addr) -#define pte_offset_map_nested(dir,addr) pte_offset_kernel(dir, addr) -#define pte_unmap(pte) do { } while (0) -#define pte_unmap_nested(pte) do { } while (0) - -#ifndef __ASSEMBLY__ -#define IOBASE_VADDR 0xff000000 -#define IOBASE_END 0xffffffff - -/* - * PTEL coherent flags. - * See Chapter 17 ST50 CPU Core Volume 1, Architecture. - */ -/* The bits that are required in the SH-5 TLB are placed in the h/w-defined - positions, to avoid expensive bit shuffling on every refill. The remaining - bits are used for s/w purposes and masked out on each refill. - - Note, the PTE slots are used to hold data of type swp_entry_t when a page is - swapped out. Only the _PAGE_PRESENT flag is significant when the page is - swapped out, and it must be placed so that it doesn't overlap either the - type or offset fields of swp_entry_t. For x86, offset is at [31:8] and type - at [6:1], with _PAGE_PRESENT at bit 0 for both pte_t and swp_entry_t. This - scheme doesn't map to SH-5 because bit [0] controls cacheability. So bit - [2] is used for _PAGE_PRESENT and the type field of swp_entry_t is split - into 2 pieces. That is handled by SWP_ENTRY and SWP_TYPE below. */ -#define _PAGE_WT 0x001 /* CB0: if cacheable, 1->write-thru, 0->write-back */ -#define _PAGE_DEVICE 0x001 /* CB0: if uncacheable, 1->device (i.e. no write-combining or reordering at bus level) */ -#define _PAGE_CACHABLE 0x002 /* CB1: uncachable/cachable */ -#define _PAGE_PRESENT 0x004 /* software: page referenced */ -#define _PAGE_FILE 0x004 /* software: only when !present */ -#define _PAGE_SIZE0 0x008 /* SZ0-bit : size of page */ -#define _PAGE_SIZE1 0x010 /* SZ1-bit : size of page */ -#define _PAGE_SHARED 0x020 /* software: reflects PTEH's SH */ -#define _PAGE_READ 0x040 /* PR0-bit : read access allowed */ -#define _PAGE_EXECUTE 0x080 /* PR1-bit : execute access allowed */ -#define _PAGE_WRITE 0x100 /* PR2-bit : write access allowed */ -#define _PAGE_USER 0x200 /* PR3-bit : user space access allowed */ -#define _PAGE_DIRTY 0x400 /* software: page accessed in write */ -#define _PAGE_ACCESSED 0x800 /* software: page referenced */ - -/* Mask which drops software flags */ -#define _PAGE_FLAGS_HARDWARE_MASK 0xfffffffffffff3dbLL - -/* - * HugeTLB support - */ -#if defined(CONFIG_HUGETLB_PAGE_SIZE_64K) -#define _PAGE_SZHUGE (_PAGE_SIZE0) -#elif defined(CONFIG_HUGETLB_PAGE_SIZE_1MB) -#define _PAGE_SZHUGE (_PAGE_SIZE1) -#elif defined(CONFIG_HUGETLB_PAGE_SIZE_512MB) -#define _PAGE_SZHUGE (_PAGE_SIZE0 | _PAGE_SIZE1) -#endif - -/* - * Stub out _PAGE_SZHUGE if we don't have a good definition for it, - * to make pte_mkhuge() happy. - */ -#ifndef _PAGE_SZHUGE -# define _PAGE_SZHUGE (0) -#endif - -/* - * Default flags for a Kernel page. - * This is fundametally also SHARED because the main use of this define - * (other than for PGD/PMD entries) is for the VMALLOC pool which is - * contextless. - * - * _PAGE_EXECUTE is required for modules - * - */ -#define _KERNPG_TABLE (_PAGE_PRESENT | _PAGE_READ | _PAGE_WRITE | \ - _PAGE_EXECUTE | \ - _PAGE_CACHABLE | _PAGE_ACCESSED | _PAGE_DIRTY | \ - _PAGE_SHARED) - -/* Default flags for a User page */ -#define _PAGE_TABLE (_KERNPG_TABLE | _PAGE_USER) - -#define _PAGE_CHG_MASK (PTE_MASK | _PAGE_ACCESSED | _PAGE_DIRTY) - -/* - * We have full permissions (Read/Write/Execute/Shared). - */ -#define _PAGE_COMMON (_PAGE_PRESENT | _PAGE_USER | \ - _PAGE_CACHABLE | _PAGE_ACCESSED) - -#define PAGE_NONE __pgprot(_PAGE_CACHABLE | _PAGE_ACCESSED) -#define PAGE_SHARED __pgprot(_PAGE_COMMON | _PAGE_READ | _PAGE_WRITE | \ - _PAGE_SHARED) -#define PAGE_EXECREAD __pgprot(_PAGE_COMMON | _PAGE_READ | _PAGE_EXECUTE) - -/* - * We need to include PAGE_EXECUTE in PAGE_COPY because it is the default - * protection mode for the stack. - */ -#define PAGE_COPY PAGE_EXECREAD - -#define PAGE_READONLY __pgprot(_PAGE_COMMON | _PAGE_READ) -#define PAGE_WRITEONLY __pgprot(_PAGE_COMMON | _PAGE_WRITE) -#define PAGE_RWX __pgprot(_PAGE_COMMON | _PAGE_READ | \ - _PAGE_WRITE | _PAGE_EXECUTE) -#define PAGE_KERNEL __pgprot(_KERNPG_TABLE) - -#define PAGE_KERNEL_NOCACHE \ - __pgprot(_PAGE_PRESENT | _PAGE_READ | _PAGE_WRITE | \ - _PAGE_EXECUTE | _PAGE_ACCESSED | \ - _PAGE_DIRTY | _PAGE_SHARED) - -/* Make it a device mapping for maximum safety (e.g. for mapping device - registers into user-space via /dev/map). */ -#define pgprot_noncached(x) __pgprot(((x).pgprot & ~(_PAGE_CACHABLE)) | _PAGE_DEVICE) -#define pgprot_writecombine(prot) __pgprot(pgprot_val(prot) & ~_PAGE_CACHABLE) - -/* - * Handling allocation failures during page table setup. - */ -extern void __handle_bad_pmd_kernel(pmd_t * pmd); -#define __handle_bad_pmd(x) __handle_bad_pmd_kernel(x) - -/* - * PTE level access routines. - * - * Note1: - * It's the tree walk leaf. This is physical address to be stored. - * - * Note 2: - * Regarding the choice of _PTE_EMPTY: - - We must choose a bit pattern that cannot be valid, whether or not the page - is present. bit[2]==1 => present, bit[2]==0 => swapped out. If swapped - out, bits [31:8], [6:3], [1:0] are under swapper control, so only bit[7] is - left for us to select. If we force bit[7]==0 when swapped out, we could use - the combination bit[7,2]=2'b10 to indicate an empty PTE. Alternatively, if - we force bit[7]==1 when swapped out, we can use all zeroes to indicate - empty. This is convenient, because the page tables get cleared to zero - when they are allocated. - - */ -#define _PTE_EMPTY 0x0 -#define pte_present(x) (pte_val(x) & _PAGE_PRESENT) -#define pte_clear(mm,addr,xp) (set_pte_at(mm, addr, xp, __pte(_PTE_EMPTY))) -#define pte_none(x) (pte_val(x) == _PTE_EMPTY) - -/* - * Some definitions to translate between mem_map, PTEs, and page - * addresses: - */ - -/* - * Given a PTE, return the index of the mem_map[] entry corresponding - * to the page frame the PTE. Get the absolute physical address, make - * a relative physical address and translate it to an index. - */ -#define pte_pagenr(x) (((unsigned long) (pte_val(x)) - \ - __MEMORY_START) >> PAGE_SHIFT) - -/* - * Given a PTE, return the "struct page *". - */ -#define pte_page(x) (mem_map + pte_pagenr(x)) - -/* - * Return number of (down rounded) MB corresponding to x pages. - */ -#define pages_to_mb(x) ((x) >> (20-PAGE_SHIFT)) - - -/* - * The following have defined behavior only work if pte_present() is true. - */ -static inline int pte_dirty(pte_t pte) { return pte_val(pte) & _PAGE_DIRTY; } -static inline int pte_young(pte_t pte) { return pte_val(pte) & _PAGE_ACCESSED; } -static inline int pte_file(pte_t pte) { return pte_val(pte) & _PAGE_FILE; } -static inline int pte_write(pte_t pte) { return pte_val(pte) & _PAGE_WRITE; } -static inline int pte_special(pte_t pte){ return 0; } - -static inline pte_t pte_wrprotect(pte_t pte) { set_pte(&pte, __pte(pte_val(pte) & ~_PAGE_WRITE)); return pte; } -static inline pte_t pte_mkclean(pte_t pte) { set_pte(&pte, __pte(pte_val(pte) & ~_PAGE_DIRTY)); return pte; } -static inline pte_t pte_mkold(pte_t pte) { set_pte(&pte, __pte(pte_val(pte) & ~_PAGE_ACCESSED)); return pte; } -static inline pte_t pte_mkwrite(pte_t pte) { set_pte(&pte, __pte(pte_val(pte) | _PAGE_WRITE)); return pte; } -static inline pte_t pte_mkdirty(pte_t pte) { set_pte(&pte, __pte(pte_val(pte) | _PAGE_DIRTY)); return pte; } -static inline pte_t pte_mkyoung(pte_t pte) { set_pte(&pte, __pte(pte_val(pte) | _PAGE_ACCESSED)); return pte; } -static inline pte_t pte_mkhuge(pte_t pte) { set_pte(&pte, __pte(pte_val(pte) | _PAGE_SZHUGE)); return pte; } -static inline pte_t pte_mkspecial(pte_t pte) { return pte; } - - -/* - * Conversion functions: convert a page and protection to a page entry. - * - * extern pte_t mk_pte(struct page *page, pgprot_t pgprot) - */ -#define mk_pte(page,pgprot) \ -({ \ - pte_t __pte; \ - \ - set_pte(&__pte, __pte((((page)-mem_map) << PAGE_SHIFT) | \ - __MEMORY_START | pgprot_val((pgprot)))); \ - __pte; \ -}) - -/* - * This takes a (absolute) physical page address that is used - * by the remapping functions - */ -#define mk_pte_phys(physpage, pgprot) \ -({ pte_t __pte; set_pte(&__pte, __pte(physpage | pgprot_val(pgprot))); __pte; }) - -static inline pte_t pte_modify(pte_t pte, pgprot_t newprot) -{ set_pte(&pte, __pte((pte_val(pte) & _PAGE_CHG_MASK) | pgprot_val(newprot))); return pte; } - -/* Encode and decode a swap entry */ -#define __swp_type(x) (((x).val & 3) + (((x).val >> 1) & 0x3c)) -#define __swp_offset(x) ((x).val >> 8) -#define __swp_entry(type, offset) ((swp_entry_t) { ((offset << 8) + ((type & 0x3c) << 1) + (type & 3)) }) -#define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) }) -#define __swp_entry_to_pte(x) ((pte_t) { (x).val }) - -/* Encode and decode a nonlinear file mapping entry */ -#define PTE_FILE_MAX_BITS 29 -#define pte_to_pgoff(pte) (pte_val(pte)) -#define pgoff_to_pte(off) ((pte_t) { (off) | _PAGE_FILE }) - -#endif /* !__ASSEMBLY__ */ - -#define pfn_pte(pfn, prot) __pte(((pfn) << PAGE_SHIFT) | pgprot_val(prot)) -#define pfn_pmd(pfn, prot) __pmd(((pfn) << PAGE_SHIFT) | pgprot_val(prot)) - -#endif /* __ASM_SH_PGTABLE_64_H */ diff --git a/include/asm-sh/pm.h b/include/asm-sh/pm.h deleted file mode 100644 index 56fdbd6b1c9..00000000000 --- a/include/asm-sh/pm.h +++ /dev/null @@ -1,17 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright 2006 (c) Andriy Skulysh - * - */ -#ifndef __ASM_SH_PM_H -#define __ASM_SH_PM_H - -extern u8 wakeup_start; -extern u8 wakeup_end; - -void pm_enter(void); - -#endif diff --git a/include/asm-sh/poll.h b/include/asm-sh/poll.h deleted file mode 100644 index c98509d3149..00000000000 --- a/include/asm-sh/poll.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/include/asm-sh/posix_types.h b/include/asm-sh/posix_types.h deleted file mode 100644 index 4eeb723aee7..00000000000 --- a/include/asm-sh/posix_types.h +++ /dev/null @@ -1,13 +0,0 @@ -#ifdef __KERNEL__ -# ifdef CONFIG_SUPERH32 -# include "posix_types_32.h" -# else -# include "posix_types_64.h" -# endif -#else -# ifdef __SH5__ -# include "posix_types_64.h" -# else -# include "posix_types_32.h" -# endif -#endif /* __KERNEL__ */ diff --git a/include/asm-sh/posix_types_32.h b/include/asm-sh/posix_types_32.h deleted file mode 100644 index 0a3d2f54ab2..00000000000 --- a/include/asm-sh/posix_types_32.h +++ /dev/null @@ -1,122 +0,0 @@ -#ifndef __ASM_SH_POSIX_TYPES_H -#define __ASM_SH_POSIX_TYPES_H - -/* - * This file is generally used by user-level software, so you need to - * be a little careful about namespace pollution etc. Also, we cannot - * assume GCC is being used. - */ - -typedef unsigned long __kernel_ino_t; -typedef unsigned short __kernel_mode_t; -typedef unsigned short __kernel_nlink_t; -typedef long __kernel_off_t; -typedef int __kernel_pid_t; -typedef unsigned short __kernel_ipc_pid_t; -typedef unsigned short __kernel_uid_t; -typedef unsigned short __kernel_gid_t; -typedef unsigned int __kernel_size_t; -typedef int __kernel_ssize_t; -typedef int __kernel_ptrdiff_t; -typedef long __kernel_time_t; -typedef long __kernel_suseconds_t; -typedef long __kernel_clock_t; -typedef int __kernel_timer_t; -typedef int __kernel_clockid_t; -typedef int __kernel_daddr_t; -typedef char * __kernel_caddr_t; -typedef unsigned short __kernel_uid16_t; -typedef unsigned short __kernel_gid16_t; -typedef unsigned int __kernel_uid32_t; -typedef unsigned int __kernel_gid32_t; - -typedef unsigned short __kernel_old_uid_t; -typedef unsigned short __kernel_old_gid_t; -typedef unsigned short __kernel_old_dev_t; - -#ifdef __GNUC__ -typedef long long __kernel_loff_t; -#endif - -typedef struct { -#if defined(__KERNEL__) || defined(__USE_ALL) - int val[2]; -#else /* !defined(__KERNEL__) && !defined(__USE_ALL) */ - int __val[2]; -#endif /* !defined(__KERNEL__) && !defined(__USE_ALL) */ -} __kernel_fsid_t; - -#if defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2) - -#undef __FD_SET -static __inline__ void __FD_SET(unsigned long __fd, __kernel_fd_set *__fdsetp) -{ - unsigned long __tmp = __fd / __NFDBITS; - unsigned long __rem = __fd % __NFDBITS; - __fdsetp->fds_bits[__tmp] |= (1UL<<__rem); -} - -#undef __FD_CLR -static __inline__ void __FD_CLR(unsigned long __fd, __kernel_fd_set *__fdsetp) -{ - unsigned long __tmp = __fd / __NFDBITS; - unsigned long __rem = __fd % __NFDBITS; - __fdsetp->fds_bits[__tmp] &= ~(1UL<<__rem); -} - - -#undef __FD_ISSET -static __inline__ int __FD_ISSET(unsigned long __fd, const __kernel_fd_set *__p) -{ - unsigned long __tmp = __fd / __NFDBITS; - unsigned long __rem = __fd % __NFDBITS; - return (__p->fds_bits[__tmp] & (1UL<<__rem)) != 0; -} - -/* - * This will unroll the loop for the normal constant case (8 ints, - * for a 256-bit fd_set) - */ -#undef __FD_ZERO -static __inline__ void __FD_ZERO(__kernel_fd_set *__p) -{ - unsigned long *__tmp = __p->fds_bits; - int __i; - - if (__builtin_constant_p(__FDSET_LONGS)) { - switch (__FDSET_LONGS) { - case 16: - __tmp[ 0] = 0; __tmp[ 1] = 0; - __tmp[ 2] = 0; __tmp[ 3] = 0; - __tmp[ 4] = 0; __tmp[ 5] = 0; - __tmp[ 6] = 0; __tmp[ 7] = 0; - __tmp[ 8] = 0; __tmp[ 9] = 0; - __tmp[10] = 0; __tmp[11] = 0; - __tmp[12] = 0; __tmp[13] = 0; - __tmp[14] = 0; __tmp[15] = 0; - return; - - case 8: - __tmp[ 0] = 0; __tmp[ 1] = 0; - __tmp[ 2] = 0; __tmp[ 3] = 0; - __tmp[ 4] = 0; __tmp[ 5] = 0; - __tmp[ 6] = 0; __tmp[ 7] = 0; - return; - - case 4: - __tmp[ 0] = 0; __tmp[ 1] = 0; - __tmp[ 2] = 0; __tmp[ 3] = 0; - return; - } - } - __i = __FDSET_LONGS; - while (__i) { - __i--; - *__tmp = 0; - __tmp++; - } -} - -#endif /* defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2) */ - -#endif /* __ASM_SH_POSIX_TYPES_H */ diff --git a/include/asm-sh/posix_types_64.h b/include/asm-sh/posix_types_64.h deleted file mode 100644 index 0620317a6f0..00000000000 --- a/include/asm-sh/posix_types_64.h +++ /dev/null @@ -1,131 +0,0 @@ -#ifndef __ASM_SH64_POSIX_TYPES_H -#define __ASM_SH64_POSIX_TYPES_H - -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * include/asm-sh64/posix_types.h - * - * Copyright (C) 2000, 2001 Paolo Alberelli - * Copyright (C) 2003 Paul Mundt - * - * This file is generally used by user-level software, so you need to - * be a little careful about namespace pollution etc. Also, we cannot - * assume GCC is being used. - */ - -typedef unsigned long __kernel_ino_t; -typedef unsigned short __kernel_mode_t; -typedef unsigned short __kernel_nlink_t; -typedef long __kernel_off_t; -typedef int __kernel_pid_t; -typedef unsigned short __kernel_ipc_pid_t; -typedef unsigned short __kernel_uid_t; -typedef unsigned short __kernel_gid_t; -typedef long unsigned int __kernel_size_t; -typedef int __kernel_ssize_t; -typedef int __kernel_ptrdiff_t; -typedef long __kernel_time_t; -typedef long __kernel_suseconds_t; -typedef long __kernel_clock_t; -typedef int __kernel_timer_t; -typedef int __kernel_clockid_t; -typedef int __kernel_daddr_t; -typedef char * __kernel_caddr_t; -typedef unsigned short __kernel_uid16_t; -typedef unsigned short __kernel_gid16_t; -typedef unsigned int __kernel_uid32_t; -typedef unsigned int __kernel_gid32_t; - -typedef unsigned short __kernel_old_uid_t; -typedef unsigned short __kernel_old_gid_t; -typedef unsigned short __kernel_old_dev_t; - -#ifdef __GNUC__ -typedef long long __kernel_loff_t; -#endif - -typedef struct { -#if defined(__KERNEL__) || defined(__USE_ALL) - int val[2]; -#else /* !defined(__KERNEL__) && !defined(__USE_ALL) */ - int __val[2]; -#endif /* !defined(__KERNEL__) && !defined(__USE_ALL) */ -} __kernel_fsid_t; - -#if defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2) - -#undef __FD_SET -static __inline__ void __FD_SET(unsigned long __fd, __kernel_fd_set *__fdsetp) -{ - unsigned long __tmp = __fd / __NFDBITS; - unsigned long __rem = __fd % __NFDBITS; - __fdsetp->fds_bits[__tmp] |= (1UL<<__rem); -} - -#undef __FD_CLR -static __inline__ void __FD_CLR(unsigned long __fd, __kernel_fd_set *__fdsetp) -{ - unsigned long __tmp = __fd / __NFDBITS; - unsigned long __rem = __fd % __NFDBITS; - __fdsetp->fds_bits[__tmp] &= ~(1UL<<__rem); -} - - -#undef __FD_ISSET -static __inline__ int __FD_ISSET(unsigned long __fd, const __kernel_fd_set *__p) -{ - unsigned long __tmp = __fd / __NFDBITS; - unsigned long __rem = __fd % __NFDBITS; - return (__p->fds_bits[__tmp] & (1UL<<__rem)) != 0; -} - -/* - * This will unroll the loop for the normal constant case (8 ints, - * for a 256-bit fd_set) - */ -#undef __FD_ZERO -static __inline__ void __FD_ZERO(__kernel_fd_set *__p) -{ - unsigned long *__tmp = __p->fds_bits; - int __i; - - if (__builtin_constant_p(__FDSET_LONGS)) { - switch (__FDSET_LONGS) { - case 16: - __tmp[ 0] = 0; __tmp[ 1] = 0; - __tmp[ 2] = 0; __tmp[ 3] = 0; - __tmp[ 4] = 0; __tmp[ 5] = 0; - __tmp[ 6] = 0; __tmp[ 7] = 0; - __tmp[ 8] = 0; __tmp[ 9] = 0; - __tmp[10] = 0; __tmp[11] = 0; - __tmp[12] = 0; __tmp[13] = 0; - __tmp[14] = 0; __tmp[15] = 0; - return; - - case 8: - __tmp[ 0] = 0; __tmp[ 1] = 0; - __tmp[ 2] = 0; __tmp[ 3] = 0; - __tmp[ 4] = 0; __tmp[ 5] = 0; - __tmp[ 6] = 0; __tmp[ 7] = 0; - return; - - case 4: - __tmp[ 0] = 0; __tmp[ 1] = 0; - __tmp[ 2] = 0; __tmp[ 3] = 0; - return; - } - } - __i = __FDSET_LONGS; - while (__i) { - __i--; - *__tmp = 0; - __tmp++; - } -} - -#endif /* defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2) */ - -#endif /* __ASM_SH64_POSIX_TYPES_H */ diff --git a/include/asm-sh/processor.h b/include/asm-sh/processor.h deleted file mode 100644 index 15d9f92ca38..00000000000 --- a/include/asm-sh/processor.h +++ /dev/null @@ -1,66 +0,0 @@ -#ifndef __ASM_SH_PROCESSOR_H -#define __ASM_SH_PROCESSOR_H - -#include -#include - -#ifndef __ASSEMBLY__ -/* - * CPU type and hardware bug flags. Kept separately for each CPU. - * - * Each one of these also needs a CONFIG_CPU_SUBTYPE_xxx entry - * in arch/sh/mm/Kconfig, as well as an entry in arch/sh/kernel/setup.c - * for parsing the subtype in get_cpu_subtype(). - */ -enum cpu_type { - /* SH-2 types */ - CPU_SH7619, - - /* SH-2A types */ - CPU_SH7203, CPU_SH7206, CPU_SH7263, CPU_MXG, - - /* SH-3 types */ - CPU_SH7705, CPU_SH7706, CPU_SH7707, - CPU_SH7708, CPU_SH7708S, CPU_SH7708R, - CPU_SH7709, CPU_SH7709A, CPU_SH7710, CPU_SH7712, - CPU_SH7720, CPU_SH7721, CPU_SH7729, - - /* SH-4 types */ - CPU_SH7750, CPU_SH7750S, CPU_SH7750R, CPU_SH7751, CPU_SH7751R, - CPU_SH7760, CPU_SH4_202, CPU_SH4_501, - - /* SH-4A types */ - CPU_SH7763, CPU_SH7770, CPU_SH7780, CPU_SH7781, CPU_SH7785, - CPU_SH7723, CPU_SHX3, - - /* SH4AL-DSP types */ - CPU_SH7343, CPU_SH7722, CPU_SH7366, - - /* SH-5 types */ - CPU_SH5_101, CPU_SH5_103, - - /* Unknown subtype */ - CPU_SH_NONE -}; - -/* Forward decl */ -struct sh_cpuinfo; - -/* arch/sh/kernel/setup.c */ -const char *get_cpu_subtype(struct sh_cpuinfo *c); - -#ifdef CONFIG_VSYSCALL -int vsyscall_init(void); -#else -#define vsyscall_init() do { } while (0) -#endif - -#endif /* __ASSEMBLY__ */ - -#ifdef CONFIG_SUPERH32 -# include "processor_32.h" -#else -# include "processor_64.h" -#endif - -#endif /* __ASM_SH_PROCESSOR_H */ diff --git a/include/asm-sh/processor_32.h b/include/asm-sh/processor_32.h deleted file mode 100644 index 0dadd75bd93..00000000000 --- a/include/asm-sh/processor_32.h +++ /dev/null @@ -1,216 +0,0 @@ -/* - * include/asm-sh/processor.h - * - * Copyright (C) 1999, 2000 Niibe Yutaka - * Copyright (C) 2002, 2003 Paul Mundt - */ - -#ifndef __ASM_SH_PROCESSOR_32_H -#define __ASM_SH_PROCESSOR_32_H -#ifdef __KERNEL__ - -#include -#include -#include -#include -#include - -/* - * Default implementation of macro that returns current - * instruction pointer ("program counter"). - */ -#define current_text_addr() ({ void *pc; __asm__("mova 1f, %0\n.align 2\n1:":"=z" (pc)); pc; }) - -/* Core Processor Version Register */ -#define CCN_PVR 0xff000030 -#define CCN_CVR 0xff000040 -#define CCN_PRR 0xff000044 - -struct sh_cpuinfo { - unsigned int type; - int cut_major, cut_minor; - unsigned long loops_per_jiffy; - unsigned long asid_cache; - - struct cache_info icache; /* Primary I-cache */ - struct cache_info dcache; /* Primary D-cache */ - struct cache_info scache; /* Secondary cache */ - - unsigned long flags; -} __attribute__ ((aligned(L1_CACHE_BYTES))); - -extern struct sh_cpuinfo cpu_data[]; -#define boot_cpu_data cpu_data[0] -#define current_cpu_data cpu_data[smp_processor_id()] -#define raw_current_cpu_data cpu_data[raw_smp_processor_id()] - -/* - * User space process size: 2GB. - * - * Since SH7709 and SH7750 have "area 7", we can't use 0x7c000000--0x7fffffff - */ -#define TASK_SIZE 0x7c000000UL - -#define STACK_TOP TASK_SIZE -#define STACK_TOP_MAX STACK_TOP - -/* This decides where the kernel will search for a free chunk of vm - * space during mmap's. - */ -#define TASK_UNMAPPED_BASE (TASK_SIZE / 3) - -/* - * Bit of SR register - * - * FD-bit: - * When it's set, it means the processor doesn't have right to use FPU, - * and it results exception when the floating operation is executed. - * - * IMASK-bit: - * Interrupt level mask - */ -#define SR_DSP 0x00001000 -#define SR_IMASK 0x000000f0 -#define SR_FD 0x00008000 - -/* - * FPU structure and data - */ - -struct sh_fpu_hard_struct { - unsigned long fp_regs[16]; - unsigned long xfp_regs[16]; - unsigned long fpscr; - unsigned long fpul; - - long status; /* software status information */ -}; - -/* Dummy fpu emulator */ -struct sh_fpu_soft_struct { - unsigned long fp_regs[16]; - unsigned long xfp_regs[16]; - unsigned long fpscr; - unsigned long fpul; - - unsigned char lookahead; - unsigned long entry_pc; -}; - -union sh_fpu_union { - struct sh_fpu_hard_struct hard; - struct sh_fpu_soft_struct soft; -}; - -struct thread_struct { - /* Saved registers when thread is descheduled */ - unsigned long sp; - unsigned long pc; - - /* Hardware debugging registers */ - unsigned long ubc_pc; - - /* floating point info */ - union sh_fpu_union fpu; -}; - -/* Count of active tasks with UBC settings */ -extern int ubc_usercnt; - -#define INIT_THREAD { \ - .sp = sizeof(init_stack) + (long) &init_stack, \ -} - -/* - * Do necessary setup to start up a newly executed thread. - */ -#define start_thread(regs, new_pc, new_sp) \ - set_fs(USER_DS); \ - regs->pr = 0; \ - regs->sr = SR_FD; /* User mode. */ \ - regs->pc = new_pc; \ - regs->regs[15] = new_sp - -/* Forward declaration, a strange C thing */ -struct task_struct; -struct mm_struct; - -/* Free all resources held by a thread. */ -extern void release_thread(struct task_struct *); - -/* Prepare to copy thread state - unlazy all lazy status */ -#define prepare_to_copy(tsk) do { } while (0) - -/* - * create a kernel thread without removing it from tasklists - */ -extern int kernel_thread(int (*fn)(void *), void * arg, unsigned long flags); - -/* Copy and release all segment info associated with a VM */ -#define copy_segments(p, mm) do { } while(0) -#define release_segments(mm) do { } while(0) - -/* - * FPU lazy state save handling. - */ - -static __inline__ void disable_fpu(void) -{ - unsigned long __dummy; - - /* Set FD flag in SR */ - __asm__ __volatile__("stc sr, %0\n\t" - "or %1, %0\n\t" - "ldc %0, sr" - : "=&r" (__dummy) - : "r" (SR_FD)); -} - -static __inline__ void enable_fpu(void) -{ - unsigned long __dummy; - - /* Clear out FD flag in SR */ - __asm__ __volatile__("stc sr, %0\n\t" - "and %1, %0\n\t" - "ldc %0, sr" - : "=&r" (__dummy) - : "r" (~SR_FD)); -} - -/* Double presision, NANS as NANS, rounding to nearest, no exceptions */ -#define FPSCR_INIT 0x00080000 - -#define FPSCR_CAUSE_MASK 0x0001f000 /* Cause bits */ -#define FPSCR_FLAG_MASK 0x0000007c /* Flag bits */ - -/* - * Return saved PC of a blocked thread. - */ -#define thread_saved_pc(tsk) (tsk->thread.pc) - -void show_trace(struct task_struct *tsk, unsigned long *sp, - struct pt_regs *regs); -extern unsigned long get_wchan(struct task_struct *p); - -#define KSTK_EIP(tsk) (task_pt_regs(tsk)->pc) -#define KSTK_ESP(tsk) (task_pt_regs(tsk)->regs[15]) - -#define cpu_sleep() __asm__ __volatile__ ("sleep" : : : "memory") -#define cpu_relax() barrier() - -#if defined(CONFIG_CPU_SH2A) || defined(CONFIG_CPU_SH3) || \ - defined(CONFIG_CPU_SH4) -#define PREFETCH_STRIDE L1_CACHE_BYTES -#define ARCH_HAS_PREFETCH -#define ARCH_HAS_PREFETCHW -static inline void prefetch(void *x) -{ - __asm__ __volatile__ ("pref @%0\n\t" : : "r" (x) : "memory"); -} - -#define prefetchw(x) prefetch(x) -#endif - -#endif /* __KERNEL__ */ -#endif /* __ASM_SH_PROCESSOR_32_H */ diff --git a/include/asm-sh/processor_64.h b/include/asm-sh/processor_64.h deleted file mode 100644 index fc7fc685ba2..00000000000 --- a/include/asm-sh/processor_64.h +++ /dev/null @@ -1,275 +0,0 @@ -#ifndef __ASM_SH_PROCESSOR_64_H -#define __ASM_SH_PROCESSOR_64_H - -/* - * include/asm-sh/processor_64.h - * - * Copyright (C) 2000, 2001 Paolo Alberelli - * Copyright (C) 2003 Paul Mundt - * Copyright (C) 2004 Richard Curnow - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ -#ifndef __ASSEMBLY__ - -#include -#include -#include -#include -#include -#include - -/* - * Default implementation of macro that returns current - * instruction pointer ("program counter"). - */ -#define current_text_addr() ({ \ -void *pc; \ -unsigned long long __dummy = 0; \ -__asm__("gettr tr0, %1\n\t" \ - "pta 4, tr0\n\t" \ - "gettr tr0, %0\n\t" \ - "ptabs %1, tr0\n\t" \ - :"=r" (pc), "=r" (__dummy) \ - : "1" (__dummy)); \ -pc; }) - -/* - * TLB information structure - * - * Defined for both I and D tlb, per-processor. - */ -struct tlb_info { - unsigned long long next; - unsigned long long first; - unsigned long long last; - - unsigned int entries; - unsigned int step; - - unsigned long flags; -}; - -struct sh_cpuinfo { - enum cpu_type type; - unsigned long loops_per_jiffy; - unsigned long asid_cache; - - unsigned int cpu_clock, master_clock, bus_clock, module_clock; - - /* Cache info */ - struct cache_info icache; - struct cache_info dcache; - struct cache_info scache; - - /* TLB info */ - struct tlb_info itlb; - struct tlb_info dtlb; - - unsigned long flags; -}; - -extern struct sh_cpuinfo cpu_data[]; -#define boot_cpu_data cpu_data[0] -#define current_cpu_data cpu_data[smp_processor_id()] -#define raw_current_cpu_data cpu_data[raw_smp_processor_id()] - -#endif - -/* - * User space process size: 2GB - 4k. - */ -#define TASK_SIZE 0x7ffff000UL - -#define STACK_TOP TASK_SIZE -#define STACK_TOP_MAX STACK_TOP - -/* This decides where the kernel will search for a free chunk of vm - * space during mmap's. - */ -#define TASK_UNMAPPED_BASE (TASK_SIZE / 3) - -/* - * Bit of SR register - * - * FD-bit: - * When it's set, it means the processor doesn't have right to use FPU, - * and it results exception when the floating operation is executed. - * - * IMASK-bit: - * Interrupt level mask - * - * STEP-bit: - * Single step bit - * - */ -#if defined(CONFIG_SH64_SR_WATCH) -#define SR_MMU 0x84000000 -#else -#define SR_MMU 0x80000000 -#endif - -#define SR_IMASK 0x000000f0 -#define SR_FD 0x00008000 -#define SR_SSTEP 0x08000000 - -#ifndef __ASSEMBLY__ - -/* - * FPU structure and data : require 8-byte alignment as we need to access it - with fld.p, fst.p - */ - -struct sh_fpu_hard_struct { - unsigned long fp_regs[64]; - unsigned int fpscr; - /* long status; * software status information */ -}; - -#if 0 -/* Dummy fpu emulator */ -struct sh_fpu_soft_struct { - unsigned long long fp_regs[32]; - unsigned int fpscr; - unsigned char lookahead; - unsigned long entry_pc; -}; -#endif - -union sh_fpu_union { - struct sh_fpu_hard_struct hard; - /* 'hard' itself only produces 32 bit alignment, yet we need - to access it using 64 bit load/store as well. */ - unsigned long long alignment_dummy; -}; - -struct thread_struct { - unsigned long sp; - unsigned long pc; - /* This stores the address of the pt_regs built during a context - switch, or of the register save area built for a kernel mode - exception. It is used for backtracing the stack of a sleeping task - or one that traps in kernel mode. */ - struct pt_regs *kregs; - /* This stores the address of the pt_regs constructed on entry from - user mode. It is a fixed value over the lifetime of a process, or - NULL for a kernel thread. */ - struct pt_regs *uregs; - - unsigned long trap_no, error_code; - unsigned long address; - /* Hardware debugging registers may come here */ - - /* floating point info */ - union sh_fpu_union fpu; -}; - -#define INIT_MMAP \ -{ &init_mm, 0, 0, NULL, PAGE_SHARED, VM_READ | VM_WRITE | VM_EXEC, 1, NULL, NULL } - -extern struct pt_regs fake_swapper_regs; - -#define INIT_THREAD { \ - .sp = sizeof(init_stack) + \ - (long) &init_stack, \ - .pc = 0, \ - .kregs = &fake_swapper_regs, \ - .uregs = NULL, \ - .trap_no = 0, \ - .error_code = 0, \ - .address = 0, \ - .fpu = { { { 0, } }, } \ -} - -/* - * Do necessary setup to start up a newly executed thread. - */ -#define SR_USER (SR_MMU | SR_FD) - -#define start_thread(regs, new_pc, new_sp) \ - set_fs(USER_DS); \ - regs->sr = SR_USER; /* User mode. */ \ - regs->pc = new_pc - 4; /* Compensate syscall exit */ \ - regs->pc |= 1; /* Set SHmedia ! */ \ - regs->regs[18] = 0; \ - regs->regs[15] = new_sp - -/* Forward declaration, a strange C thing */ -struct task_struct; -struct mm_struct; - -/* Free all resources held by a thread. */ -extern void release_thread(struct task_struct *); -/* - * create a kernel thread without removing it from tasklists - */ -extern int kernel_thread(int (*fn)(void *), void * arg, unsigned long flags); - - -/* Copy and release all segment info associated with a VM */ -#define copy_segments(p, mm) do { } while (0) -#define release_segments(mm) do { } while (0) -#define forget_segments() do { } while (0) -#define prepare_to_copy(tsk) do { } while (0) -/* - * FPU lazy state save handling. - */ - -static inline void disable_fpu(void) -{ - unsigned long long __dummy; - - /* Set FD flag in SR */ - __asm__ __volatile__("getcon " __SR ", %0\n\t" - "or %0, %1, %0\n\t" - "putcon %0, " __SR "\n\t" - : "=&r" (__dummy) - : "r" (SR_FD)); -} - -static inline void enable_fpu(void) -{ - unsigned long long __dummy; - - /* Clear out FD flag in SR */ - __asm__ __volatile__("getcon " __SR ", %0\n\t" - "and %0, %1, %0\n\t" - "putcon %0, " __SR "\n\t" - : "=&r" (__dummy) - : "r" (~SR_FD)); -} - -/* Round to nearest, no exceptions on inexact, overflow, underflow, - zero-divide, invalid. Configure option for whether to flush denorms to - zero, or except if a denorm is encountered. */ -#if defined(CONFIG_SH64_FPU_DENORM_FLUSH) -#define FPSCR_INIT 0x00040000 -#else -#define FPSCR_INIT 0x00000000 -#endif - -#ifdef CONFIG_SH_FPU -/* Initialise the FP state of a task */ -void fpinit(struct sh_fpu_hard_struct *fpregs); -#else -#define fpinit(fpregs) do { } while (0) -#endif - -extern struct task_struct *last_task_used_math; - -/* - * Return saved PC of a blocked thread. - */ -#define thread_saved_pc(tsk) (tsk->thread.pc) - -extern unsigned long get_wchan(struct task_struct *p); - -#define KSTK_EIP(tsk) ((tsk)->thread.pc) -#define KSTK_ESP(tsk) ((tsk)->thread.sp) - -#define cpu_relax() barrier() - -#endif /* __ASSEMBLY__ */ -#endif /* __ASM_SH_PROCESSOR_64_H */ diff --git a/include/asm-sh/ptrace.h b/include/asm-sh/ptrace.h deleted file mode 100644 index 643ab5a7cf3..00000000000 --- a/include/asm-sh/ptrace.h +++ /dev/null @@ -1,130 +0,0 @@ -#ifndef __ASM_SH_PTRACE_H -#define __ASM_SH_PTRACE_H - -/* - * Copyright (C) 1999, 2000 Niibe Yutaka - * - */ -#if defined(__SH5__) -struct pt_regs { - unsigned long long pc; - unsigned long long sr; - unsigned long long syscall_nr; - unsigned long long regs[63]; - unsigned long long tregs[8]; - unsigned long long pad[2]; -}; -#else -/* - * GCC defines register number like this: - * ----------------------------- - * 0 - 15 are integer registers - * 17 - 22 are control/special registers - * 24 - 39 fp registers - * 40 - 47 xd registers - * 48 - fpscr register - * ----------------------------- - * - * We follows above, except: - * 16 --- program counter (PC) - * 22 --- syscall # - * 23 --- floating point communication register - */ -#define REG_REG0 0 -#define REG_REG15 15 - -#define REG_PC 16 - -#define REG_PR 17 -#define REG_SR 18 -#define REG_GBR 19 -#define REG_MACH 20 -#define REG_MACL 21 - -#define REG_SYSCALL 22 - -#define REG_FPREG0 23 -#define REG_FPREG15 38 -#define REG_XFREG0 39 -#define REG_XFREG15 54 - -#define REG_FPSCR 55 -#define REG_FPUL 56 - -/* - * This struct defines the way the registers are stored on the - * kernel stack during a system call or other kernel entry. - */ -struct pt_regs { - unsigned long regs[16]; - unsigned long pc; - unsigned long pr; - unsigned long sr; - unsigned long gbr; - unsigned long mach; - unsigned long macl; - long tra; -}; - -/* - * This struct defines the way the DSP registers are stored on the - * kernel stack during a system call or other kernel entry. - */ -struct pt_dspregs { - unsigned long a1; - unsigned long a0g; - unsigned long a1g; - unsigned long m0; - unsigned long m1; - unsigned long a0; - unsigned long x0; - unsigned long x1; - unsigned long y0; - unsigned long y1; - unsigned long dsr; - unsigned long rs; - unsigned long re; - unsigned long mod; -}; - -#define PTRACE_GETFDPIC 31 /* get the ELF fdpic loadmap address */ - -#define PTRACE_GETFDPIC_EXEC 0 /* [addr] request the executable loadmap */ -#define PTRACE_GETFDPIC_INTERP 1 /* [addr] request the interpreter loadmap */ - -#define PTRACE_GETDSPREGS 55 -#define PTRACE_SETDSPREGS 56 -#endif - -#ifdef __KERNEL__ -#include - -#define user_mode(regs) (((regs)->sr & 0x40000000)==0) -#define instruction_pointer(regs) ((unsigned long)(regs)->pc) - -extern void show_regs(struct pt_regs *); - -#ifdef CONFIG_SH_DSP -#define task_pt_regs(task) \ - ((struct pt_regs *) (task_stack_page(task) + THREAD_SIZE \ - - sizeof(struct pt_dspregs) - sizeof(unsigned long)) - 1) -#else -#define task_pt_regs(task) \ - ((struct pt_regs *) (task_stack_page(task) + THREAD_SIZE \ - - sizeof(unsigned long)) - 1) -#endif - -static inline unsigned long profile_pc(struct pt_regs *regs) -{ - unsigned long pc = instruction_pointer(regs); - -#ifdef P2SEG - if (pc >= P2SEG && pc < P3SEG) - pc -= 0x20000000; -#endif - - return pc; -} -#endif /* __KERNEL__ */ - -#endif /* __ASM_SH_PTRACE_H */ diff --git a/include/asm-sh/push-switch.h b/include/asm-sh/push-switch.h deleted file mode 100644 index 4903f9e52dd..00000000000 --- a/include/asm-sh/push-switch.h +++ /dev/null @@ -1,31 +0,0 @@ -#ifndef __ASM_SH_PUSH_SWITCH_H -#define __ASM_SH_PUSH_SWITCH_H - -#include -#include -#include -#include - -struct push_switch { - /* switch state */ - unsigned int state:1; - /* debounce timer */ - struct timer_list debounce; - /* workqueue */ - struct work_struct work; - /* platform device, for workqueue handler */ - struct platform_device *pdev; -}; - -struct push_switch_platform_info { - /* IRQ handler */ - irqreturn_t (*irq_handler)(int irq, void *data); - /* Special IRQ flags */ - unsigned int irq_flags; - /* Bit location of switch */ - unsigned int bit; - /* Symbolic switch name */ - const char *name; -}; - -#endif /* __ASM_SH_PUSH_SWITCH_H */ diff --git a/include/asm-sh/r7780rp.h b/include/asm-sh/r7780rp.h deleted file mode 100644 index 306f7359f7d..00000000000 --- a/include/asm-sh/r7780rp.h +++ /dev/null @@ -1,198 +0,0 @@ -#ifndef __ASM_SH_RENESAS_R7780RP_H -#define __ASM_SH_RENESAS_R7780RP_H - -/* Box specific addresses. */ -#if defined(CONFIG_SH_R7780MP) -#define PA_BCR 0xa4000000 /* FPGA */ -#define PA_SDPOW (-1) - -#define PA_IRLMSK (PA_BCR+0x0000) /* Interrupt Mask control */ -#define PA_IRLMON (PA_BCR+0x0002) /* Interrupt Status control */ -#define PA_IRLPRI1 (PA_BCR+0x0004) /* Interrupt Priorty 1 */ -#define PA_IRLPRI2 (PA_BCR+0x0006) /* Interrupt Priorty 2 */ -#define PA_IRLPRI3 (PA_BCR+0x0008) /* Interrupt Priorty 3 */ -#define PA_IRLPRI4 (PA_BCR+0x000a) /* Interrupt Priorty 4 */ -#define PA_RSTCTL (PA_BCR+0x000c) /* Reset Control */ -#define PA_PCIBD (PA_BCR+0x000e) /* PCI Board detect control */ -#define PA_PCICD (PA_BCR+0x0010) /* PCI Conector detect control */ -#define PA_EXTGIO (PA_BCR+0x0016) /* Extension GPIO Control */ -#define PA_IVDRMON (PA_BCR+0x0018) /* iVDR Moniter control */ -#define PA_IVDRCTL (PA_BCR+0x001a) /* iVDR control */ -#define PA_OBLED (PA_BCR+0x001c) /* On Board LED control */ -#define PA_OBSW (PA_BCR+0x001e) /* On Board Switch control */ -#define PA_AUDIOSEL (PA_BCR+0x0020) /* Sound Interface Select control */ -#define PA_EXTPLR (PA_BCR+0x001e) /* Extention Pin Polarity control */ -#define PA_TPCTL (PA_BCR+0x0100) /* Touch Panel Access control */ -#define PA_TPDCKCTL (PA_BCR+0x0102) /* Touch Panel Access data control */ -#define PA_TPCTLCLR (PA_BCR+0x0104) /* Touch Panel Access control */ -#define PA_TPXPOS (PA_BCR+0x0106) /* Touch Panel X position control */ -#define PA_TPYPOS (PA_BCR+0x0108) /* Touch Panel Y position control */ -#define PA_DBSW (PA_BCR+0x0200) /* Debug Board Switch control */ -#define PA_CFCTL (PA_BCR+0x0300) /* CF Timing control */ -#define PA_CFPOW (PA_BCR+0x0302) /* CF Power control */ -#define PA_CFCDINTCLR (PA_BCR+0x0304) /* CF Insert Interrupt clear */ -#define PA_SCSMR0 (PA_BCR+0x0400) /* SCIF0 Serial mode control */ -#define PA_SCBRR0 (PA_BCR+0x0404) /* SCIF0 Bit rate control */ -#define PA_SCSCR0 (PA_BCR+0x0408) /* SCIF0 Serial control */ -#define PA_SCFTDR0 (PA_BCR+0x040c) /* SCIF0 Send FIFO control */ -#define PA_SCFSR0 (PA_BCR+0x0410) /* SCIF0 Serial status control */ -#define PA_SCFRDR0 (PA_BCR+0x0414) /* SCIF0 Receive FIFO control */ -#define PA_SCFCR0 (PA_BCR+0x0418) /* SCIF0 FIFO control */ -#define PA_SCTFDR0 (PA_BCR+0x041c) /* SCIF0 Send FIFO data control */ -#define PA_SCRFDR0 (PA_BCR+0x0420) /* SCIF0 Receive FIFO data control */ -#define PA_SCSPTR0 (PA_BCR+0x0424) /* SCIF0 Serial Port control */ -#define PA_SCLSR0 (PA_BCR+0x0428) /* SCIF0 Line Status control */ -#define PA_SCRER0 (PA_BCR+0x042c) /* SCIF0 Serial Error control */ -#define PA_SCSMR1 (PA_BCR+0x0500) /* SCIF1 Serial mode control */ -#define PA_SCBRR1 (PA_BCR+0x0504) /* SCIF1 Bit rate control */ -#define PA_SCSCR1 (PA_BCR+0x0508) /* SCIF1 Serial control */ -#define PA_SCFTDR1 (PA_BCR+0x050c) /* SCIF1 Send FIFO control */ -#define PA_SCFSR1 (PA_BCR+0x0510) /* SCIF1 Serial status control */ -#define PA_SCFRDR1 (PA_BCR+0x0514) /* SCIF1 Receive FIFO control */ -#define PA_SCFCR1 (PA_BCR+0x0518) /* SCIF1 FIFO control */ -#define PA_SCTFDR1 (PA_BCR+0x051c) /* SCIF1 Send FIFO data control */ -#define PA_SCRFDR1 (PA_BCR+0x0520) /* SCIF1 Receive FIFO data control */ -#define PA_SCSPTR1 (PA_BCR+0x0524) /* SCIF1 Serial Port control */ -#define PA_SCLSR1 (PA_BCR+0x0528) /* SCIF1 Line Status control */ -#define PA_SCRER1 (PA_BCR+0x052c) /* SCIF1 Serial Error control */ -#define PA_SMCR (PA_BCR+0x0600) /* 2-wire Serial control */ -#define PA_SMSMADR (PA_BCR+0x0602) /* 2-wire Serial Slave control */ -#define PA_SMMR (PA_BCR+0x0604) /* 2-wire Serial Mode control */ -#define PA_SMSADR1 (PA_BCR+0x0606) /* 2-wire Serial Address1 control */ -#define PA_SMTRDR1 (PA_BCR+0x0646) /* 2-wire Serial Data1 control */ -#define PA_VERREG (PA_BCR+0x0700) /* FPGA Version Register */ -#define PA_POFF (PA_BCR+0x0800) /* System Power Off control */ -#define PA_PMR (PA_BCR+0x0900) /* */ - -#define IRLCNTR1 (PA_BCR + 0) /* Interrupt Control Register1 */ -#define IVDR_CK_ON 8 /* iVDR Clock ON */ - -#elif defined(CONFIG_SH_R7780RP) -#define PA_POFF (-1) - -#define PA_BCR 0xa5000000 /* FPGA */ -#define PA_IRLMSK (PA_BCR+0x0000) /* Interrupt Mask control */ -#define PA_IRLMON (PA_BCR+0x0002) /* Interrupt Status control */ -#define PA_SDPOW (PA_BCR+0x0004) /* SD Power control */ -#define PA_RSTCTL (PA_BCR+0x0006) /* Device Reset control */ -#define PA_PCIBD (PA_BCR+0x0008) /* PCI Board detect control */ -#define PA_PCICD (PA_BCR+0x000a) /* PCI Conector detect control */ -#define PA_ZIGIO1 (PA_BCR+0x000c) /* Zigbee IO control 1 */ -#define PA_ZIGIO2 (PA_BCR+0x000e) /* Zigbee IO control 2 */ -#define PA_ZIGIO3 (PA_BCR+0x0010) /* Zigbee IO control 3 */ -#define PA_ZIGIO4 (PA_BCR+0x0012) /* Zigbee IO control 4 */ -#define PA_IVDRMON (PA_BCR+0x0014) /* iVDR Moniter control */ -#define PA_IVDRCTL (PA_BCR+0x0016) /* iVDR control */ -#define PA_OBLED (PA_BCR+0x0018) /* On Board LED control */ -#define PA_OBSW (PA_BCR+0x001a) /* On Board Switch control */ -#define PA_AUDIOSEL (PA_BCR+0x001c) /* Sound Interface Select control */ -#define PA_EXTPLR (PA_BCR+0x001e) /* Extention Pin Polarity control */ -#define PA_TPCTL (PA_BCR+0x0100) /* Touch Panel Access control */ -#define PA_TPDCKCTL (PA_BCR+0x0102) /* Touch Panel Access data control */ -#define PA_TPCTLCLR (PA_BCR+0x0104) /* Touch Panel Access control */ -#define PA_TPXPOS (PA_BCR+0x0106) /* Touch Panel X position control */ -#define PA_TPYPOS (PA_BCR+0x0108) /* Touch Panel Y position control */ -#define PA_DBDET (PA_BCR+0x0200) /* Debug Board detect control */ -#define PA_DBDISPCTL (PA_BCR+0x0202) /* Debug Board Dot timing control */ -#define PA_DBSW (PA_BCR+0x0204) /* Debug Board Switch control */ -#define PA_CFCTL (PA_BCR+0x0300) /* CF Timing control */ -#define PA_CFPOW (PA_BCR+0x0302) /* CF Power control */ -#define PA_CFCDINTCLR (PA_BCR+0x0304) /* CF Insert Interrupt clear */ -#define PA_SCSMR (PA_BCR+0x0400) /* SCIF Serial mode control */ -#define PA_SCBRR (PA_BCR+0x0402) /* SCIF Bit rate control */ -#define PA_SCSCR (PA_BCR+0x0404) /* SCIF Serial control */ -#define PA_SCFDTR (PA_BCR+0x0406) /* SCIF Send FIFO control */ -#define PA_SCFSR (PA_BCR+0x0408) /* SCIF Serial status control */ -#define PA_SCFRDR (PA_BCR+0x040a) /* SCIF Receive FIFO control */ -#define PA_SCFCR (PA_BCR+0x040c) /* SCIF FIFO control */ -#define PA_SCFDR (PA_BCR+0x040e) /* SCIF FIFO data control */ -#define PA_SCLSR (PA_BCR+0x0412) /* SCIF Line Status control */ -#define PA_SMCR (PA_BCR+0x0500) /* 2-wire Serial control */ -#define PA_SMSMADR (PA_BCR+0x0502) /* 2-wire Serial Slave control */ -#define PA_SMMR (PA_BCR+0x0504) /* 2-wire Serial Mode control */ -#define PA_SMSADR1 (PA_BCR+0x0506) /* 2-wire Serial Address1 control */ -#define PA_SMTRDR1 (PA_BCR+0x0546) /* 2-wire Serial Data1 control */ -#define PA_VERREG (PA_BCR+0x0600) /* FPGA Version Register */ - -#define PA_AX88796L 0xa5800400 /* AX88796L Area */ -#define PA_SC1602BSLB 0xa6000000 /* SC1602BSLB Area */ -#define PA_IDE_OFFSET 0x1f0 /* CF IDE Offset */ -#define AX88796L_IO_BASE 0x1000 /* AX88796L IO Base Address */ - -#define IRLCNTR1 (PA_BCR + 0) /* Interrupt Control Register1 */ - -#define IVDR_CK_ON 8 /* iVDR Clock ON */ - -#elif defined(CONFIG_SH_R7785RP) -#define PA_BCR 0xa4000000 /* FPGA */ -#define PA_SDPOW (-1) - -#define PA_PCISCR (PA_BCR+0x0000) -#define PA_IRLPRA (PA_BCR+0x0002) -#define PA_IRLPRB (PA_BCR+0x0004) -#define PA_IRLPRC (PA_BCR+0x0006) -#define PA_IRLPRD (PA_BCR+0x0008) -#define IRLCNTR1 (PA_BCR+0x0010) -#define PA_IRLPRE (PA_BCR+0x000a) -#define PA_IRLPRF (PA_BCR+0x000c) -#define PA_EXIRLCR (PA_BCR+0x000e) -#define PA_IRLMCR1 (PA_BCR+0x0010) -#define PA_IRLMCR2 (PA_BCR+0x0012) -#define PA_IRLSSR1 (PA_BCR+0x0014) -#define PA_IRLSSR2 (PA_BCR+0x0016) -#define PA_CFTCR (PA_BCR+0x0100) -#define PA_CFPCR (PA_BCR+0x0102) -#define PA_PCICR (PA_BCR+0x0110) -#define PA_IVDRCTL (PA_BCR+0x0112) -#define PA_IVDRSR (PA_BCR+0x0114) -#define PA_PDRSTCR (PA_BCR+0x0116) -#define PA_POFF (PA_BCR+0x0120) -#define PA_LCDCR (PA_BCR+0x0130) -#define PA_TPCR (PA_BCR+0x0140) -#define PA_TPCKCR (PA_BCR+0x0142) -#define PA_TPRSTR (PA_BCR+0x0144) -#define PA_TPXPDR (PA_BCR+0x0146) -#define PA_TPYPDR (PA_BCR+0x0148) -#define PA_GPIOPFR (PA_BCR+0x0150) -#define PA_GPIODR (PA_BCR+0x0152) -#define PA_OBLED (PA_BCR+0x0154) -#define PA_SWSR (PA_BCR+0x0156) -#define PA_VERREG (PA_BCR+0x0158) -#define PA_SMCR (PA_BCR+0x0200) -#define PA_SMSMADR (PA_BCR+0x0202) -#define PA_SMMR (PA_BCR+0x0204) -#define PA_SMSADR1 (PA_BCR+0x0206) -#define PA_SMSADR32 (PA_BCR+0x0244) -#define PA_SMTRDR1 (PA_BCR+0x0246) -#define PA_SMTRDR16 (PA_BCR+0x0264) -#define PA_CU3MDR (PA_BCR+0x0300) -#define PA_CU5MDR (PA_BCR+0x0302) -#define PA_MMSR (PA_BCR+0x0400) - -#define IVDR_CK_ON 4 /* iVDR Clock ON */ -#endif - -#define HL_FPGA_IRQ_BASE 200 -#define HL_NR_IRL 15 - -#define IRQ_AX88796 (HL_FPGA_IRQ_BASE + 0) -#define IRQ_CF (HL_FPGA_IRQ_BASE + 1) -#define IRQ_PSW (HL_FPGA_IRQ_BASE + 2) -#define IRQ_EXT0 (HL_FPGA_IRQ_BASE + 3) -#define IRQ_EXT1 (HL_FPGA_IRQ_BASE + 4) -#define IRQ_EXT2 (HL_FPGA_IRQ_BASE + 5) -#define IRQ_EXT3 (HL_FPGA_IRQ_BASE + 6) -#define IRQ_EXT4 (HL_FPGA_IRQ_BASE + 7) -#define IRQ_EXT5 (HL_FPGA_IRQ_BASE + 8) -#define IRQ_EXT6 (HL_FPGA_IRQ_BASE + 9) -#define IRQ_EXT7 (HL_FPGA_IRQ_BASE + 10) -#define IRQ_SMBUS (HL_FPGA_IRQ_BASE + 11) -#define IRQ_TP (HL_FPGA_IRQ_BASE + 12) -#define IRQ_RTC (HL_FPGA_IRQ_BASE + 13) -#define IRQ_TH_ALERT (HL_FPGA_IRQ_BASE + 14) -#define IRQ_SCIF0 (HL_FPGA_IRQ_BASE + 15) -#define IRQ_SCIF1 (HL_FPGA_IRQ_BASE + 16) - -unsigned char *highlander_plat_irq_setup(void); - -#endif /* __ASM_SH_RENESAS_R7780RP */ diff --git a/include/asm-sh/resource.h b/include/asm-sh/resource.h deleted file mode 100644 index 9c2499a86ec..00000000000 --- a/include/asm-sh/resource.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef __ASM_SH_RESOURCE_H -#define __ASM_SH_RESOURCE_H - -#include - -#endif /* __ASM_SH_RESOURCE_H */ diff --git a/include/asm-sh/rtc.h b/include/asm-sh/rtc.h deleted file mode 100644 index ec45ba8e11d..00000000000 --- a/include/asm-sh/rtc.h +++ /dev/null @@ -1,16 +0,0 @@ -#ifndef _ASM_RTC_H -#define _ASM_RTC_H - -extern void (*board_time_init)(void); -extern void (*rtc_sh_get_time)(struct timespec *); -extern int (*rtc_sh_set_time)(const time_t); - -#define RTC_CAP_4_DIGIT_YEAR (1 << 0) - -struct sh_rtc_platform_info { - unsigned long capabilities; -}; - -#include - -#endif /* _ASM_RTC_H */ diff --git a/include/asm-sh/rts7751r2d.h b/include/asm-sh/rts7751r2d.h deleted file mode 100644 index 0a800157b82..00000000000 --- a/include/asm-sh/rts7751r2d.h +++ /dev/null @@ -1,70 +0,0 @@ -#ifndef __ASM_SH_RENESAS_RTS7751R2D_H -#define __ASM_SH_RENESAS_RTS7751R2D_H - -/* - * linux/include/asm-sh/renesas_rts7751r2d.h - * - * Copyright (C) 2000 Atom Create Engineering Co., Ltd. - * - * Renesas Technology Sales RTS7751R2D support - */ - -/* Board specific addresses. */ - -#define PA_BCR 0xa4000000 /* FPGA */ -#define PA_IRLMON 0xa4000002 /* Interrupt Status control */ -#define PA_CFCTL 0xa4000004 /* CF Timing control */ -#define PA_CFPOW 0xa4000006 /* CF Power control */ -#define PA_DISPCTL 0xa4000008 /* Display Timing control */ -#define PA_SDMPOW 0xa400000a /* SD Power control */ -#define PA_RTCCE 0xa400000c /* RTC(9701) Enable control */ -#define PA_PCICD 0xa400000e /* PCI Extention detect control */ -#define PA_VOYAGERRTS 0xa4000020 /* VOYAGER Reset control */ - -#define PA_R2D1_AXRST 0xa4000022 /* AX_LAN Reset control */ -#define PA_R2D1_CFRST 0xa4000024 /* CF Reset control */ -#define PA_R2D1_ADMRTS 0xa4000026 /* SD Reset control */ -#define PA_R2D1_EXTRST 0xa4000028 /* Extention Reset control */ -#define PA_R2D1_CFCDINTCLR 0xa400002a /* CF Insert Interrupt clear */ - -#define PA_R2DPLUS_CFRST 0xa4000022 /* CF Reset control */ -#define PA_R2DPLUS_ADMRTS 0xa4000024 /* SD Reset control */ -#define PA_R2DPLUS_EXTRST 0xa4000026 /* Extention Reset control */ -#define PA_R2DPLUS_CFCDINTCLR 0xa4000028 /* CF Insert Interrupt clear */ -#define PA_R2DPLUS_KEYCTLCLR 0xa400002a /* Key Interrupt clear */ - -#define PA_POWOFF 0xa4000030 /* Board Power OFF control */ -#define PA_VERREG 0xa4000032 /* FPGA Version Register */ -#define PA_INPORT 0xa4000034 /* KEY Input Port control */ -#define PA_OUTPORT 0xa4000036 /* LED control */ -#define PA_BVERREG 0xa4000038 /* Board Revision Register */ - -#define PA_AX88796L 0xaa000400 /* AX88796L Area */ -#define PA_VOYAGER 0xab000000 /* VOYAGER GX Area */ -#define PA_IDE_OFFSET 0x1f0 /* CF IDE Offset */ -#define AX88796L_IO_BASE 0x1000 /* AX88796L IO Base Address */ - -#define IRLCNTR1 (PA_BCR + 0) /* Interrupt Control Register1 */ - -#define R2D_FPGA_IRQ_BASE 100 - -#define IRQ_VOYAGER (R2D_FPGA_IRQ_BASE + 0) -#define IRQ_EXT (R2D_FPGA_IRQ_BASE + 1) -#define IRQ_TP (R2D_FPGA_IRQ_BASE + 2) -#define IRQ_RTC_T (R2D_FPGA_IRQ_BASE + 3) -#define IRQ_RTC_A (R2D_FPGA_IRQ_BASE + 4) -#define IRQ_SDCARD (R2D_FPGA_IRQ_BASE + 5) -#define IRQ_CF_CD (R2D_FPGA_IRQ_BASE + 6) -#define IRQ_CF_IDE (R2D_FPGA_IRQ_BASE + 7) -#define IRQ_AX88796 (R2D_FPGA_IRQ_BASE + 8) -#define IRQ_KEY (R2D_FPGA_IRQ_BASE + 9) -#define IRQ_PCI_INTA (R2D_FPGA_IRQ_BASE + 10) -#define IRQ_PCI_INTB (R2D_FPGA_IRQ_BASE + 11) -#define IRQ_PCI_INTC (R2D_FPGA_IRQ_BASE + 12) -#define IRQ_PCI_INTD (R2D_FPGA_IRQ_BASE + 13) - -/* arch/sh/boards/renesas/rts7751r2d/irq.c */ -void init_rts7751r2d_IRQ(void); -int rts7751r2d_irq_demux(int); - -#endif /* __ASM_SH_RENESAS_RTS7751R2D */ diff --git a/include/asm-sh/rwsem.h b/include/asm-sh/rwsem.h deleted file mode 100644 index 1987f3ea7f1..00000000000 --- a/include/asm-sh/rwsem.h +++ /dev/null @@ -1,188 +0,0 @@ -/* - * include/asm-sh/rwsem.h: R/W semaphores for SH using the stuff - * in lib/rwsem.c. - */ - -#ifndef _ASM_SH_RWSEM_H -#define _ASM_SH_RWSEM_H - -#ifndef _LINUX_RWSEM_H -#error "please don't include asm/rwsem.h directly, use linux/rwsem.h instead" -#endif - -#ifdef __KERNEL__ -#include -#include -#include -#include - -/* - * the semaphore definition - */ -struct rw_semaphore { - long count; -#define RWSEM_UNLOCKED_VALUE 0x00000000 -#define RWSEM_ACTIVE_BIAS 0x00000001 -#define RWSEM_ACTIVE_MASK 0x0000ffff -#define RWSEM_WAITING_BIAS (-0x00010000) -#define RWSEM_ACTIVE_READ_BIAS RWSEM_ACTIVE_BIAS -#define RWSEM_ACTIVE_WRITE_BIAS (RWSEM_WAITING_BIAS + RWSEM_ACTIVE_BIAS) - spinlock_t wait_lock; - struct list_head wait_list; -#ifdef CONFIG_DEBUG_LOCK_ALLOC - struct lockdep_map dep_map; -#endif -}; - -#ifdef CONFIG_DEBUG_LOCK_ALLOC -# define __RWSEM_DEP_MAP_INIT(lockname) , .dep_map = { .name = #lockname } -#else -# define __RWSEM_DEP_MAP_INIT(lockname) -#endif - -#define __RWSEM_INITIALIZER(name) \ - { RWSEM_UNLOCKED_VALUE, SPIN_LOCK_UNLOCKED, \ - LIST_HEAD_INIT((name).wait_list) \ - __RWSEM_DEP_MAP_INIT(name) } - -#define DECLARE_RWSEM(name) \ - struct rw_semaphore name = __RWSEM_INITIALIZER(name) - -extern struct rw_semaphore *rwsem_down_read_failed(struct rw_semaphore *sem); -extern struct rw_semaphore *rwsem_down_write_failed(struct rw_semaphore *sem); -extern struct rw_semaphore *rwsem_wake(struct rw_semaphore *sem); -extern struct rw_semaphore *rwsem_downgrade_wake(struct rw_semaphore *sem); - -extern void __init_rwsem(struct rw_semaphore *sem, const char *name, - struct lock_class_key *key); - -#define init_rwsem(sem) \ -do { \ - static struct lock_class_key __key; \ - \ - __init_rwsem((sem), #sem, &__key); \ -} while (0) - -static inline void init_rwsem(struct rw_semaphore *sem) -{ - sem->count = RWSEM_UNLOCKED_VALUE; - spin_lock_init(&sem->wait_lock); - INIT_LIST_HEAD(&sem->wait_list); -} - -/* - * lock for reading - */ -static inline void __down_read(struct rw_semaphore *sem) -{ - if (atomic_inc_return((atomic_t *)(&sem->count)) > 0) - smp_wmb(); - else - rwsem_down_read_failed(sem); -} - -static inline int __down_read_trylock(struct rw_semaphore *sem) -{ - int tmp; - - while ((tmp = sem->count) >= 0) { - if (tmp == cmpxchg(&sem->count, tmp, - tmp + RWSEM_ACTIVE_READ_BIAS)) { - smp_wmb(); - return 1; - } - } - return 0; -} - -/* - * lock for writing - */ -static inline void __down_write(struct rw_semaphore *sem) -{ - int tmp; - - tmp = atomic_add_return(RWSEM_ACTIVE_WRITE_BIAS, - (atomic_t *)(&sem->count)); - if (tmp == RWSEM_ACTIVE_WRITE_BIAS) - smp_wmb(); - else - rwsem_down_write_failed(sem); -} - -static inline int __down_write_trylock(struct rw_semaphore *sem) -{ - int tmp; - - tmp = cmpxchg(&sem->count, RWSEM_UNLOCKED_VALUE, - RWSEM_ACTIVE_WRITE_BIAS); - smp_wmb(); - return tmp == RWSEM_UNLOCKED_VALUE; -} - -/* - * unlock after reading - */ -static inline void __up_read(struct rw_semaphore *sem) -{ - int tmp; - - smp_wmb(); - tmp = atomic_dec_return((atomic_t *)(&sem->count)); - if (tmp < -1 && (tmp & RWSEM_ACTIVE_MASK) == 0) - rwsem_wake(sem); -} - -/* - * unlock after writing - */ -static inline void __up_write(struct rw_semaphore *sem) -{ - smp_wmb(); - if (atomic_sub_return(RWSEM_ACTIVE_WRITE_BIAS, - (atomic_t *)(&sem->count)) < 0) - rwsem_wake(sem); -} - -/* - * implement atomic add functionality - */ -static inline void rwsem_atomic_add(int delta, struct rw_semaphore *sem) -{ - atomic_add(delta, (atomic_t *)(&sem->count)); -} - -/* - * downgrade write lock to read lock - */ -static inline void __downgrade_write(struct rw_semaphore *sem) -{ - int tmp; - - smp_wmb(); - tmp = atomic_add_return(-RWSEM_WAITING_BIAS, (atomic_t *)(&sem->count)); - if (tmp < 0) - rwsem_downgrade_wake(sem); -} - -static inline void __down_write_nested(struct rw_semaphore *sem, int subclass) -{ - __down_write(sem); -} - -/* - * implement exchange and add functionality - */ -static inline int rwsem_atomic_update(int delta, struct rw_semaphore *sem) -{ - smp_mb(); - return atomic_add_return(delta, (atomic_t *)(&sem->count)); -} - -static inline int rwsem_is_locked(struct rw_semaphore *sem) -{ - return (sem->count != 0); -} - -#endif /* __KERNEL__ */ -#endif /* _ASM_SH_RWSEM_H */ diff --git a/include/asm-sh/scatterlist.h b/include/asm-sh/scatterlist.h deleted file mode 100644 index 2084d037369..00000000000 --- a/include/asm-sh/scatterlist.h +++ /dev/null @@ -1,27 +0,0 @@ -#ifndef __ASM_SH_SCATTERLIST_H -#define __ASM_SH_SCATTERLIST_H - -#include - -struct scatterlist { -#ifdef CONFIG_DEBUG_SG - unsigned long sg_magic; -#endif - unsigned long page_link; - unsigned int offset;/* for highmem, page offset */ - dma_addr_t dma_address; - unsigned int length; -}; - -#define ISA_DMA_THRESHOLD PHYS_ADDR_MASK - -/* These macros should be used after a pci_map_sg call has been done - * to get bus addresses of each of the SG entries and their lengths. - * You should only work with the number of sg entries pci_map_sg - * returns, or alternatively stop on the first sg_dma_len(sg) which - * is 0. - */ -#define sg_dma_address(sg) ((sg)->dma_address) -#define sg_dma_len(sg) ((sg)->length) - -#endif /* !(__ASM_SH_SCATTERLIST_H) */ diff --git a/include/asm-sh/sdk7780.h b/include/asm-sh/sdk7780.h deleted file mode 100644 index 697dc865f21..00000000000 --- a/include/asm-sh/sdk7780.h +++ /dev/null @@ -1,81 +0,0 @@ -#ifndef __ASM_SH_RENESAS_SDK7780_H -#define __ASM_SH_RENESAS_SDK7780_H - -/* - * linux/include/asm-sh/sdk7780.h - * - * Renesas Solutions SH7780 SDK Support - * Copyright (C) 2008 Nicholas Beck - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ -#include - -/* Box specific addresses. */ -#define SE_AREA0_WIDTH 4 /* Area0: 32bit */ -#define PA_ROM 0xa0000000 /* EPROM */ -#define PA_ROM_SIZE 0x00400000 /* EPROM size 4M byte */ -#define PA_FROM 0xa0800000 /* Flash-ROM */ -#define PA_FROM_SIZE 0x00400000 /* Flash-ROM size 4M byte */ -#define PA_EXT1 0xa4000000 -#define PA_EXT1_SIZE 0x04000000 -#define PA_SDRAM 0xa8000000 /* DDR-SDRAM(Area2/3) 128MB */ -#define PA_SDRAM_SIZE 0x08000000 - -#define PA_EXT4 0xb0000000 -#define PA_EXT4_SIZE 0x04000000 -#define PA_EXT_USER PA_EXT4 /* User Expansion Space */ - -#define PA_PERIPHERAL PA_AREA5_IO - -/* SRAM/Reserved */ -#define PA_RESERVED (PA_PERIPHERAL + 0) -/* FPGA base address */ -#define PA_FPGA (PA_PERIPHERAL + 0x01000000) -/* SMC LAN91C111 */ -#define PA_LAN (PA_PERIPHERAL + 0x01800000) - - -#define FPGA_SRSTR (PA_FPGA + 0x000) /* System reset */ -#define FPGA_IRQ0SR (PA_FPGA + 0x010) /* IRQ0 status */ -#define FPGA_IRQ0MR (PA_FPGA + 0x020) /* IRQ0 mask */ -#define FPGA_BDMR (PA_FPGA + 0x030) /* Board operating mode */ -#define FPGA_INTT0PRTR (PA_FPGA + 0x040) /* Interrupt test mode0 port */ -#define FPGA_INTT0SELR (PA_FPGA + 0x050) /* Int. test mode0 select */ -#define FPGA_INTT1POLR (PA_FPGA + 0x060) /* Int. test mode0 polarity */ -#define FPGA_NMIR (PA_FPGA + 0x070) /* NMI source */ -#define FPGA_NMIMR (PA_FPGA + 0x080) /* NMI mask */ -#define FPGA_IRQR (PA_FPGA + 0x090) /* IRQX source */ -#define FPGA_IRQMR (PA_FPGA + 0x0A0) /* IRQX mask */ -#define FPGA_SLEDR (PA_FPGA + 0x0B0) /* LED control */ -#define PA_LED FPGA_SLEDR -#define FPGA_MAPSWR (PA_FPGA + 0x0C0) /* Map switch */ -#define FPGA_FPVERR (PA_FPGA + 0x0D0) /* FPGA version */ -#define FPGA_FPDATER (PA_FPGA + 0x0E0) /* FPGA date */ -#define FPGA_RSE (PA_FPGA + 0x100) /* Reset source */ -#define FPGA_EASR (PA_FPGA + 0x110) /* External area select */ -#define FPGA_SPER (PA_FPGA + 0x120) /* Serial port enable */ -#define FPGA_IMSR (PA_FPGA + 0x130) /* Interrupt mode select */ -#define FPGA_PCIMR (PA_FPGA + 0x140) /* PCI Mode */ -#define FPGA_DIPSWMR (PA_FPGA + 0x150) /* DIPSW monitor */ -#define FPGA_FPODR (PA_FPGA + 0x160) /* Output port data */ -#define FPGA_ATAESR (PA_FPGA + 0x170) /* ATA extended bus status */ -#define FPGA_IRQPOLR (PA_FPGA + 0x180) /* IRQx polarity */ - - -#define SDK7780_NR_IRL 15 -/* IDE/ATA interrupt */ -#define IRQ_CFCARD 14 -/* SMC interrupt */ -#define IRQ_ETHERNET 6 - - -/* arch/sh/boards/renesas/sdk7780/irq.c */ -void init_sdk7780_IRQ(void); - -#define __IO_PREFIX sdk7780 -#include - -#endif /* __ASM_SH_RENESAS_SDK7780_H */ diff --git a/include/asm-sh/se.h b/include/asm-sh/se.h deleted file mode 100644 index eb23000e1bb..00000000000 --- a/include/asm-sh/se.h +++ /dev/null @@ -1,99 +0,0 @@ -#ifndef __ASM_SH_HITACHI_SE_H -#define __ASM_SH_HITACHI_SE_H - -/* - * linux/include/asm-sh/hitachi_se.h - * - * Copyright (C) 2000 Kazumoto Kojima - * - * Hitachi SolutionEngine support - */ - -/* Box specific addresses. */ - -#define PA_ROM 0x00000000 /* EPROM */ -#define PA_ROM_SIZE 0x00400000 /* EPROM size 4M byte */ -#define PA_FROM 0x01000000 /* EPROM */ -#define PA_FROM_SIZE 0x00400000 /* EPROM size 4M byte */ -#define PA_EXT1 0x04000000 -#define PA_EXT1_SIZE 0x04000000 -#define PA_EXT2 0x08000000 -#define PA_EXT2_SIZE 0x04000000 -#define PA_SDRAM 0x0c000000 -#define PA_SDRAM_SIZE 0x04000000 - -#define PA_EXT4 0x12000000 -#define PA_EXT4_SIZE 0x02000000 -#define PA_EXT5 0x14000000 -#define PA_EXT5_SIZE 0x04000000 -#define PA_PCIC 0x18000000 /* MR-SHPC-01 PCMCIA */ - -#define PA_83902 0xb0000000 /* DP83902A */ -#define PA_83902_IF 0xb0040000 /* DP83902A remote io port */ -#define PA_83902_RST 0xb0080000 /* DP83902A reset port */ - -#define PA_SUPERIO 0xb0400000 /* SMC37C935A super io chip */ -#define PA_DIPSW0 0xb0800000 /* Dip switch 5,6 */ -#define PA_DIPSW1 0xb0800002 /* Dip switch 7,8 */ -#define PA_LED 0xb0c00000 /* LED */ -#if defined(CONFIG_CPU_SUBTYPE_SH7705) -#define PA_BCR 0xb0e00000 -#else -#define PA_BCR 0xb1400000 /* FPGA */ -#endif - -#define PA_MRSHPC 0xb83fffe0 /* MR-SHPC-01 PCMCIA controller */ -#define PA_MRSHPC_MW1 0xb8400000 /* MR-SHPC-01 memory window base */ -#define PA_MRSHPC_MW2 0xb8500000 /* MR-SHPC-01 attribute window base */ -#define PA_MRSHPC_IO 0xb8600000 /* MR-SHPC-01 I/O window base */ -#define MRSHPC_OPTION (PA_MRSHPC + 6) -#define MRSHPC_CSR (PA_MRSHPC + 8) -#define MRSHPC_ISR (PA_MRSHPC + 10) -#define MRSHPC_ICR (PA_MRSHPC + 12) -#define MRSHPC_CPWCR (PA_MRSHPC + 14) -#define MRSHPC_MW0CR1 (PA_MRSHPC + 16) -#define MRSHPC_MW1CR1 (PA_MRSHPC + 18) -#define MRSHPC_IOWCR1 (PA_MRSHPC + 20) -#define MRSHPC_MW0CR2 (PA_MRSHPC + 22) -#define MRSHPC_MW1CR2 (PA_MRSHPC + 24) -#define MRSHPC_IOWCR2 (PA_MRSHPC + 26) -#define MRSHPC_CDCR (PA_MRSHPC + 28) -#define MRSHPC_PCIC_INFO (PA_MRSHPC + 30) - -#define BCR_ILCRA (PA_BCR + 0) -#define BCR_ILCRB (PA_BCR + 2) -#define BCR_ILCRC (PA_BCR + 4) -#define BCR_ILCRD (PA_BCR + 6) -#define BCR_ILCRE (PA_BCR + 8) -#define BCR_ILCRF (PA_BCR + 10) -#define BCR_ILCRG (PA_BCR + 12) - -#if defined(CONFIG_CPU_SUBTYPE_SH7705) -#define IRQ_STNIC 12 -#define IRQ_CFCARD 14 -#else -#define IRQ_STNIC 10 -#define IRQ_CFCARD 7 -#endif - -/* SH Ether support (SH7710/SH7712) */ -/* Base address */ -#define SH_ETH0_BASE 0xA7000000 -#define SH_ETH1_BASE 0xA7000400 -/* PHY ID */ -#if defined(CONFIG_CPU_SUBTYPE_SH7710) -# define PHY_ID 0x00 -#elif defined(CONFIG_CPU_SUBTYPE_SH7712) -# define PHY_ID 0x01 -#endif -/* Ether IRQ */ -#define SH_ETH0_IRQ 80 -#define SH_ETH1_IRQ 81 -#define SH_TSU_IRQ 82 - -void init_se_IRQ(void); - -#define __IO_PREFIX se -#include - -#endif /* __ASM_SH_HITACHI_SE_H */ diff --git a/include/asm-sh/se7206.h b/include/asm-sh/se7206.h deleted file mode 100644 index 698eb80389a..00000000000 --- a/include/asm-sh/se7206.h +++ /dev/null @@ -1,13 +0,0 @@ -#ifndef __ASM_SH_SE7206_H -#define __ASM_SH_SE7206_H - -#define PA_SMSC 0x30000000 -#define PA_MRSHPC 0x34000000 -#define PA_LED 0x31400000 - -void init_se7206_IRQ(void); - -#define __IO_PREFIX se7206 -#include - -#endif /* __ASM_SH_SE7206_H */ diff --git a/include/asm-sh/se7343.h b/include/asm-sh/se7343.h deleted file mode 100644 index 98458460e63..00000000000 --- a/include/asm-sh/se7343.h +++ /dev/null @@ -1,149 +0,0 @@ -#ifndef __ASM_SH_HITACHI_SE7343_H -#define __ASM_SH_HITACHI_SE7343_H - -/* - * include/asm-sh/se/se7343.h - * - * Copyright (C) 2003 Takashi Kusuda - * - * SH-Mobile SolutionEngine 7343 support - */ - -/* Box specific addresses. */ - -/* Area 0 */ -#define PA_ROM 0x00000000 /* EPROM */ -#define PA_ROM_SIZE 0x00400000 /* EPROM size 4M byte(Actually 2MB) */ -#define PA_FROM 0x00400000 /* Flash ROM */ -#define PA_FROM_SIZE 0x00400000 /* Flash size 4M byte */ -#define PA_SRAM 0x00800000 /* SRAM */ -#define PA_FROM_SIZE 0x00400000 /* SRAM size 4M byte */ -/* Area 1 */ -#define PA_EXT1 0x04000000 -#define PA_EXT1_SIZE 0x04000000 -/* Area 2 */ -#define PA_EXT2 0x08000000 -#define PA_EXT2_SIZE 0x04000000 -/* Area 3 */ -#define PA_SDRAM 0x0c000000 -#define PA_SDRAM_SIZE 0x04000000 -/* Area 4 */ -#define PA_PCIC 0x10000000 /* MR-SHPC-01 PCMCIA */ -#define PA_MRSHPC 0xb03fffe0 /* MR-SHPC-01 PCMCIA controller */ -#define PA_MRSHPC_MW1 0xb0400000 /* MR-SHPC-01 memory window base */ -#define PA_MRSHPC_MW2 0xb0500000 /* MR-SHPC-01 attribute window base */ -#define PA_MRSHPC_IO 0xb0600000 /* MR-SHPC-01 I/O window base */ -#define MRSHPC_OPTION (PA_MRSHPC + 6) -#define MRSHPC_CSR (PA_MRSHPC + 8) -#define MRSHPC_ISR (PA_MRSHPC + 10) -#define MRSHPC_ICR (PA_MRSHPC + 12) -#define MRSHPC_CPWCR (PA_MRSHPC + 14) -#define MRSHPC_MW0CR1 (PA_MRSHPC + 16) -#define MRSHPC_MW1CR1 (PA_MRSHPC + 18) -#define MRSHPC_IOWCR1 (PA_MRSHPC + 20) -#define MRSHPC_MW0CR2 (PA_MRSHPC + 22) -#define MRSHPC_MW1CR2 (PA_MRSHPC + 24) -#define MRSHPC_IOWCR2 (PA_MRSHPC + 26) -#define MRSHPC_CDCR (PA_MRSHPC + 28) -#define MRSHPC_PCIC_INFO (PA_MRSHPC + 30) -#define PA_LED 0xb0C00000 /* LED */ -#define LED_SHIFT 0 -#define PA_DIPSW 0xb0900000 /* Dip switch 31 */ -#define PA_CPLD_MODESET 0xb1400004 /* CPLD Mode set register */ -#define PA_CPLD_ST 0xb1400008 /* CPLD Interrupt status register */ -#define PA_CPLD_IMSK 0xb140000a /* CPLD Interrupt mask register */ -/* Area 5 */ -#define PA_EXT5 0x14000000 -#define PA_EXT5_SIZE 0x04000000 -/* Area 6 */ -#define PA_LCD1 0xb8000000 -#define PA_LCD2 0xb8800000 - -#define PORT_PACR 0xA4050100 -#define PORT_PBCR 0xA4050102 -#define PORT_PCCR 0xA4050104 -#define PORT_PDCR 0xA4050106 -#define PORT_PECR 0xA4050108 -#define PORT_PFCR 0xA405010A -#define PORT_PGCR 0xA405010C -#define PORT_PHCR 0xA405010E -#define PORT_PJCR 0xA4050110 -#define PORT_PKCR 0xA4050112 -#define PORT_PLCR 0xA4050114 -#define PORT_PMCR 0xA4050116 -#define PORT_PNCR 0xA4050118 -#define PORT_PQCR 0xA405011A -#define PORT_PRCR 0xA405011C -#define PORT_PSCR 0xA405011E -#define PORT_PTCR 0xA4050140 -#define PORT_PUCR 0xA4050142 -#define PORT_PVCR 0xA4050144 -#define PORT_PWCR 0xA4050146 -#define PORT_PYCR 0xA4050148 -#define PORT_PZCR 0xA405014A - -#define PORT_PSELA 0xA405014C -#define PORT_PSELB 0xA405014E -#define PORT_PSELC 0xA4050150 -#define PORT_PSELD 0xA4050152 -#define PORT_PSELE 0xA4050154 - -#define PORT_HIZCRA 0xA4050156 -#define PORT_HIZCRB 0xA4050158 -#define PORT_HIZCRC 0xA405015C - -#define PORT_DRVCR 0xA4050180 - -#define PORT_PADR 0xA4050120 -#define PORT_PBDR 0xA4050122 -#define PORT_PCDR 0xA4050124 -#define PORT_PDDR 0xA4050126 -#define PORT_PEDR 0xA4050128 -#define PORT_PFDR 0xA405012A -#define PORT_PGDR 0xA405012C -#define PORT_PHDR 0xA405012E -#define PORT_PJDR 0xA4050130 -#define PORT_PKDR 0xA4050132 -#define PORT_PLDR 0xA4050134 -#define PORT_PMDR 0xA4050136 -#define PORT_PNDR 0xA4050138 -#define PORT_PQDR 0xA405013A -#define PORT_PRDR 0xA405013C -#define PORT_PTDR 0xA4050160 -#define PORT_PUDR 0xA4050162 -#define PORT_PVDR 0xA4050164 -#define PORT_PWDR 0xA4050166 -#define PORT_PYDR 0xA4050168 - -#define FPGA_IN 0xb1400000 -#define FPGA_OUT 0xb1400002 - -#define __IO_PREFIX sh7343se -#include - -#define IRQ0_IRQ 32 -#define IRQ1_IRQ 33 -#define IRQ4_IRQ 36 -#define IRQ5_IRQ 37 - -#define SE7343_FPGA_IRQ_MRSHPC0 0 -#define SE7343_FPGA_IRQ_MRSHPC1 1 -#define SE7343_FPGA_IRQ_MRSHPC2 2 -#define SE7343_FPGA_IRQ_MRSHPC3 3 -#define SE7343_FPGA_IRQ_SMC 6 /* EXT_IRQ2 */ -#define SE7343_FPGA_IRQ_USB 8 - -#define SE7343_FPGA_IRQ_NR 11 -#define SE7343_FPGA_IRQ_BASE 120 - -#define MRSHPC_IRQ3 (SE7343_FPGA_IRQ_BASE + SE7343_FPGA_IRQ_MRSHPC3) -#define MRSHPC_IRQ2 (SE7343_FPGA_IRQ_BASE + SE7343_FPGA_IRQ_MRSHPC2) -#define MRSHPC_IRQ1 (SE7343_FPGA_IRQ_BASE + SE7343_FPGA_IRQ_MRSHPC1) -#define MRSHPC_IRQ0 (SE7343_FPGA_IRQ_BASE + SE7343_FPGA_IRQ_MRSHPC0) -#define SMC_IRQ (SE7343_FPGA_IRQ_BASE + SE7343_FPGA_IRQ_SMC) -#define USB_IRQ (SE7343_FPGA_IRQ_BASE + SE7343_FPGA_IRQ_USB) - -/* arch/sh/boards/se/7343/irq.c */ -void init_7343se_IRQ(void); - -#endif /* __ASM_SH_HITACHI_SE7343_H */ diff --git a/include/asm-sh/se7721.h b/include/asm-sh/se7721.h deleted file mode 100644 index b957f604119..00000000000 --- a/include/asm-sh/se7721.h +++ /dev/null @@ -1,70 +0,0 @@ -/* - * Copyright (C) 2008 Renesas Solutions Corp. - * - * Hitachi UL SolutionEngine 7721 Support. - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - */ - -#ifndef __ASM_SH_SE7721_H -#define __ASM_SH_SE7721_H -#include - -/* Box specific addresses. */ -#define SE_AREA0_WIDTH 2 /* Area0: 32bit */ -#define PA_ROM 0xa0000000 /* EPROM */ -#define PA_ROM_SIZE 0x00200000 /* EPROM size 2M byte */ -#define PA_FROM 0xa1000000 /* Flash-ROM */ -#define PA_FROM_SIZE 0x01000000 /* Flash-ROM size 16M byte */ -#define PA_EXT1 0xa4000000 -#define PA_EXT1_SIZE 0x04000000 -#define PA_SDRAM 0xaC000000 /* SDRAM(Area3) 64MB */ -#define PA_SDRAM_SIZE 0x04000000 - -#define PA_EXT4 0xb0000000 -#define PA_EXT4_SIZE 0x04000000 - -#define PA_PERIPHERAL 0xB8000000 - -#define PA_PCIC PA_PERIPHERAL -#define PA_MRSHPC (PA_PERIPHERAL + 0x003fffe0) -#define PA_MRSHPC_MW1 (PA_PERIPHERAL + 0x00400000) -#define PA_MRSHPC_MW2 (PA_PERIPHERAL + 0x00500000) -#define PA_MRSHPC_IO (PA_PERIPHERAL + 0x00600000) -#define MRSHPC_OPTION (PA_MRSHPC + 6) -#define MRSHPC_CSR (PA_MRSHPC + 8) -#define MRSHPC_ISR (PA_MRSHPC + 10) -#define MRSHPC_ICR (PA_MRSHPC + 12) -#define MRSHPC_CPWCR (PA_MRSHPC + 14) -#define MRSHPC_MW0CR1 (PA_MRSHPC + 16) -#define MRSHPC_MW1CR1 (PA_MRSHPC + 18) -#define MRSHPC_IOWCR1 (PA_MRSHPC + 20) -#define MRSHPC_MW0CR2 (PA_MRSHPC + 22) -#define MRSHPC_MW1CR2 (PA_MRSHPC + 24) -#define MRSHPC_IOWCR2 (PA_MRSHPC + 26) -#define MRSHPC_CDCR (PA_MRSHPC + 28) -#define MRSHPC_PCIC_INFO (PA_MRSHPC + 30) - -#define PA_LED 0xB6800000 /* 8bit LED */ -#define PA_FPGA 0xB7000000 /* FPGA base address */ - -#define MRSHPC_IRQ0 10 - -#define FPGA_ILSR1 (PA_FPGA + 0x02) -#define FPGA_ILSR2 (PA_FPGA + 0x03) -#define FPGA_ILSR3 (PA_FPGA + 0x04) -#define FPGA_ILSR4 (PA_FPGA + 0x05) -#define FPGA_ILSR5 (PA_FPGA + 0x06) -#define FPGA_ILSR6 (PA_FPGA + 0x07) -#define FPGA_ILSR7 (PA_FPGA + 0x08) -#define FPGA_ILSR8 (PA_FPGA + 0x09) - -void init_se7721_IRQ(void); - -#define __IO_PREFIX se7721 -#include - -#endif /* __ASM_SH_SE7721_H */ diff --git a/include/asm-sh/se7722.h b/include/asm-sh/se7722.h deleted file mode 100644 index e971d9a82f4..00000000000 --- a/include/asm-sh/se7722.h +++ /dev/null @@ -1,112 +0,0 @@ -#ifndef __ASM_SH_SE7722_H -#define __ASM_SH_SE7722_H - -/* - * linux/include/asm-sh/se7722.h - * - * Copyright (C) 2007 Nobuhiro Iwamatsu - * - * Hitachi UL SolutionEngine 7722 Support. - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - */ -#include - -/* Box specific addresses. */ -#define SE_AREA0_WIDTH 4 /* Area0: 32bit */ -#define PA_ROM 0xa0000000 /* EPROM */ -#define PA_ROM_SIZE 0x00200000 /* EPROM size 2M byte */ -#define PA_FROM 0xa1000000 /* Flash-ROM */ -#define PA_FROM_SIZE 0x01000000 /* Flash-ROM size 16M byte */ -#define PA_EXT1 0xa4000000 -#define PA_EXT1_SIZE 0x04000000 -#define PA_SDRAM 0xaC000000 /* DDR-SDRAM(Area3) 64MB */ -#define PA_SDRAM_SIZE 0x04000000 - -#define PA_EXT4 0xb0000000 -#define PA_EXT4_SIZE 0x04000000 - -#define PA_PERIPHERAL 0xB0000000 - -#define PA_PCIC PA_PERIPHERAL /* MR-SHPC-01 PCMCIA */ -#define PA_MRSHPC (PA_PERIPHERAL + 0x003fffe0) /* MR-SHPC-01 PCMCIA controller */ -#define PA_MRSHPC_MW1 (PA_PERIPHERAL + 0x00400000) /* MR-SHPC-01 memory window base */ -#define PA_MRSHPC_MW2 (PA_PERIPHERAL + 0x00500000) /* MR-SHPC-01 attribute window base */ -#define PA_MRSHPC_IO (PA_PERIPHERAL + 0x00600000) /* MR-SHPC-01 I/O window base */ -#define MRSHPC_OPTION (PA_MRSHPC + 6) -#define MRSHPC_CSR (PA_MRSHPC + 8) -#define MRSHPC_ISR (PA_MRSHPC + 10) -#define MRSHPC_ICR (PA_MRSHPC + 12) -#define MRSHPC_CPWCR (PA_MRSHPC + 14) -#define MRSHPC_MW0CR1 (PA_MRSHPC + 16) -#define MRSHPC_MW1CR1 (PA_MRSHPC + 18) -#define MRSHPC_IOWCR1 (PA_MRSHPC + 20) -#define MRSHPC_MW0CR2 (PA_MRSHPC + 22) -#define MRSHPC_MW1CR2 (PA_MRSHPC + 24) -#define MRSHPC_IOWCR2 (PA_MRSHPC + 26) -#define MRSHPC_CDCR (PA_MRSHPC + 28) -#define MRSHPC_PCIC_INFO (PA_MRSHPC + 30) - -#define PA_LED (PA_PERIPHERAL + 0x00800000) /* 8bit LED */ -#define PA_FPGA (PA_PERIPHERAL + 0x01800000) /* FPGA base address */ - -#define PA_LAN (PA_AREA6_IO + 0) /* SMC LAN91C111 */ -/* GPIO */ -#define FPGA_IN 0xb1840000UL -#define FPGA_OUT 0xb1840004UL - -#define PORT_PECR 0xA4050108UL -#define PORT_PJCR 0xA4050110UL -#define PORT_PSELD 0xA4050154UL -#define PORT_PSELB 0xA4050150UL - -#define PORT_PSELC 0xA4050152UL -#define PORT_PKCR 0xA4050112UL -#define PORT_PHCR 0xA405010EUL -#define PORT_PLCR 0xA4050114UL -#define PORT_PMCR 0xA4050116UL -#define PORT_PRCR 0xA405011CUL -#define PORT_PXCR 0xA4050148UL -#define PORT_PSELA 0xA405014EUL -#define PORT_PYCR 0xA405014AUL -#define PORT_PZCR 0xA405014CUL -#define PORT_HIZCRA 0xA4050158UL -#define PORT_HIZCRC 0xA405015CUL - -/* IRQ */ -#define IRQ0_IRQ 32 -#define IRQ1_IRQ 33 - -#define IRQ01_MODE 0xb1800000 -#define IRQ01_STS 0xb1800004 -#define IRQ01_MASK 0xb1800008 - -/* Bits in IRQ01_* registers */ - -#define SE7722_FPGA_IRQ_USB 0 /* IRQ0 */ -#define SE7722_FPGA_IRQ_SMC 1 /* IRQ0 */ -#define SE7722_FPGA_IRQ_MRSHPC0 2 /* IRQ1 */ -#define SE7722_FPGA_IRQ_MRSHPC1 3 /* IRQ1 */ -#define SE7722_FPGA_IRQ_MRSHPC2 4 /* IRQ1 */ -#define SE7722_FPGA_IRQ_MRSHPC3 5 /* IRQ1 */ - -#define SE7722_FPGA_IRQ_NR 6 -#define SE7722_FPGA_IRQ_BASE 110 - -#define MRSHPC_IRQ3 (SE7722_FPGA_IRQ_BASE + SE7722_FPGA_IRQ_MRSHPC3) -#define MRSHPC_IRQ2 (SE7722_FPGA_IRQ_BASE + SE7722_FPGA_IRQ_MRSHPC2) -#define MRSHPC_IRQ1 (SE7722_FPGA_IRQ_BASE + SE7722_FPGA_IRQ_MRSHPC1) -#define MRSHPC_IRQ0 (SE7722_FPGA_IRQ_BASE + SE7722_FPGA_IRQ_MRSHPC0) -#define SMC_IRQ (SE7722_FPGA_IRQ_BASE + SE7722_FPGA_IRQ_SMC) -#define USB_IRQ (SE7722_FPGA_IRQ_BASE + SE7722_FPGA_IRQ_USB) - -/* arch/sh/boards/se/7722/irq.c */ -void init_se7722_IRQ(void); - -#define __IO_PREFIX se7722 -#include - -#endif /* __ASM_SH_SE7722_H */ diff --git a/include/asm-sh/se7751.h b/include/asm-sh/se7751.h deleted file mode 100644 index b36792ac5d6..00000000000 --- a/include/asm-sh/se7751.h +++ /dev/null @@ -1,73 +0,0 @@ -#ifndef __ASM_SH_HITACHI_7751SE_H -#define __ASM_SH_HITACHI_7751SE_H - -/* - * linux/include/asm-sh/hitachi_7751se.h - * - * Copyright (C) 2000 Kazumoto Kojima - * - * Hitachi SolutionEngine support - - * Modified for 7751 Solution Engine by - * Ian da Silva and Jeremy Siegel, 2001. - */ - -/* Box specific addresses. */ - -#define PA_ROM 0x00000000 /* EPROM */ -#define PA_ROM_SIZE 0x00400000 /* EPROM size 4M byte */ -#define PA_FROM 0x01000000 /* EPROM */ -#define PA_FROM_SIZE 0x00400000 /* EPROM size 4M byte */ -#define PA_EXT1 0x04000000 -#define PA_EXT1_SIZE 0x04000000 -#define PA_EXT2 0x08000000 -#define PA_EXT2_SIZE 0x04000000 -#define PA_SDRAM 0x0c000000 -#define PA_SDRAM_SIZE 0x04000000 - -#define PA_EXT4 0x12000000 -#define PA_EXT4_SIZE 0x02000000 -#define PA_EXT5 0x14000000 -#define PA_EXT5_SIZE 0x04000000 -#define PA_PCIC 0x18000000 /* MR-SHPC-01 PCMCIA */ - -#define PA_DIPSW0 0xb9000000 /* Dip switch 5,6 */ -#define PA_DIPSW1 0xb9000002 /* Dip switch 7,8 */ -#define PA_LED 0xba000000 /* LED */ -#define PA_BCR 0xbb000000 /* FPGA on the MS7751SE01 */ - -#define PA_MRSHPC 0xb83fffe0 /* MR-SHPC-01 PCMCIA controller */ -#define PA_MRSHPC_MW1 0xb8400000 /* MR-SHPC-01 memory window base */ -#define PA_MRSHPC_MW2 0xb8500000 /* MR-SHPC-01 attribute window base */ -#define PA_MRSHPC_IO 0xb8600000 /* MR-SHPC-01 I/O window base */ -#define MRSHPC_MODE (PA_MRSHPC + 4) -#define MRSHPC_OPTION (PA_MRSHPC + 6) -#define MRSHPC_CSR (PA_MRSHPC + 8) -#define MRSHPC_ISR (PA_MRSHPC + 10) -#define MRSHPC_ICR (PA_MRSHPC + 12) -#define MRSHPC_CPWCR (PA_MRSHPC + 14) -#define MRSHPC_MW0CR1 (PA_MRSHPC + 16) -#define MRSHPC_MW1CR1 (PA_MRSHPC + 18) -#define MRSHPC_IOWCR1 (PA_MRSHPC + 20) -#define MRSHPC_MW0CR2 (PA_MRSHPC + 22) -#define MRSHPC_MW1CR2 (PA_MRSHPC + 24) -#define MRSHPC_IOWCR2 (PA_MRSHPC + 26) -#define MRSHPC_CDCR (PA_MRSHPC + 28) -#define MRSHPC_PCIC_INFO (PA_MRSHPC + 30) - -#define BCR_ILCRA (PA_BCR + 0) -#define BCR_ILCRB (PA_BCR + 2) -#define BCR_ILCRC (PA_BCR + 4) -#define BCR_ILCRD (PA_BCR + 6) -#define BCR_ILCRE (PA_BCR + 8) -#define BCR_ILCRF (PA_BCR + 10) -#define BCR_ILCRG (PA_BCR + 12) - -#define IRQ_79C973 13 - -void init_7751se_IRQ(void); - -#define __IO_PREFIX sh7751se -#include - -#endif /* __ASM_SH_HITACHI_7751SE_H */ diff --git a/include/asm-sh/se7780.h b/include/asm-sh/se7780.h deleted file mode 100644 index 40e9b41458c..00000000000 --- a/include/asm-sh/se7780.h +++ /dev/null @@ -1,108 +0,0 @@ -#ifndef __ASM_SH_SE7780_H -#define __ASM_SH_SE7780_H - -/* - * linux/include/asm-sh/se7780.h - * - * Copyright (C) 2006,2007 Nobuhiro Iwamatsu - * - * Hitachi UL SolutionEngine 7780 Support. - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ -#include - -/* Box specific addresses. */ -#define SE_AREA0_WIDTH 4 /* Area0: 32bit */ -#define PA_ROM 0xa0000000 /* EPROM */ -#define PA_ROM_SIZE 0x00400000 /* EPROM size 4M byte */ -#define PA_FROM 0xa1000000 /* Flash-ROM */ -#define PA_FROM_SIZE 0x01000000 /* Flash-ROM size 16M byte */ -#define PA_EXT1 0xa4000000 -#define PA_EXT1_SIZE 0x04000000 -#define PA_SM501 PA_EXT1 /* Graphic IC (SM501) */ -#define PA_SM501_SIZE PA_EXT1_SIZE /* Graphic IC (SM501) */ -#define PA_SDRAM 0xa8000000 /* DDR-SDRAM(Area2/3) 128MB */ -#define PA_SDRAM_SIZE 0x08000000 - -#define PA_EXT4 0xb0000000 -#define PA_EXT4_SIZE 0x04000000 -#define PA_EXT_FLASH PA_EXT4 /* Expansion Flash-ROM */ - -#define PA_PERIPHERAL PA_AREA6_IO /* SW6-6=ON */ - -#define PA_LAN (PA_PERIPHERAL + 0) /* SMC LAN91C111 */ -#define PA_LED_DISP (PA_PERIPHERAL + 0x02000000) /* 8words LED Display */ -#define DISP_CHAR_RAM (7 << 3) -#define DISP_SEL0_ADDR (DISP_CHAR_RAM + 0) -#define DISP_SEL1_ADDR (DISP_CHAR_RAM + 1) -#define DISP_SEL2_ADDR (DISP_CHAR_RAM + 2) -#define DISP_SEL3_ADDR (DISP_CHAR_RAM + 3) -#define DISP_SEL4_ADDR (DISP_CHAR_RAM + 4) -#define DISP_SEL5_ADDR (DISP_CHAR_RAM + 5) -#define DISP_SEL6_ADDR (DISP_CHAR_RAM + 6) -#define DISP_SEL7_ADDR (DISP_CHAR_RAM + 7) - -#define DISP_UDC_RAM (5 << 3) -#define PA_FPGA (PA_PERIPHERAL + 0x03000000) /* FPGA base address */ - -/* FPGA register address and bit */ -#define FPGA_SFTRST (PA_FPGA + 0) /* Soft reset register */ -#define FPGA_INTMSK1 (PA_FPGA + 2) /* Interrupt Mask register 1 */ -#define FPGA_INTMSK2 (PA_FPGA + 4) /* Interrupt Mask register 2 */ -#define FPGA_INTSEL1 (PA_FPGA + 6) /* Interrupt select register 1 */ -#define FPGA_INTSEL2 (PA_FPGA + 8) /* Interrupt select register 2 */ -#define FPGA_INTSEL3 (PA_FPGA + 10) /* Interrupt select register 3 */ -#define FPGA_PCI_INTSEL1 (PA_FPGA + 12) /* PCI Interrupt select register 1 */ -#define FPGA_PCI_INTSEL2 (PA_FPGA + 14) /* PCI Interrupt select register 2 */ -#define FPGA_INTSET (PA_FPGA + 16) /* IRQ/IRL select register */ -#define FPGA_INTSTS1 (PA_FPGA + 18) /* Interrupt status register 1 */ -#define FPGA_INTSTS2 (PA_FPGA + 20) /* Interrupt status register 2 */ -#define FPGA_REQSEL (PA_FPGA + 22) /* REQ/GNT select register */ -#define FPGA_DBG_LED (PA_FPGA + 32) /* Debug LED(D-LED[8:1] */ -#define PA_LED FPGA_DBG_LED -#define FPGA_IVDRID (PA_FPGA + 36) /* iVDR ID Register */ -#define FPGA_IVDRPW (PA_FPGA + 38) /* iVDR Power ON Register */ -#define FPGA_MMCID (PA_FPGA + 40) /* MMC ID Register */ - -/* FPGA INTSEL position */ -/* INTSEL1 */ -#define IRQPOS_SMC91CX (0 * 4) -#define IRQPOS_SM501 (1 * 4) -/* INTSEL2 */ -#define IRQPOS_EXTINT1 (0 * 4) -#define IRQPOS_EXTINT2 (1 * 4) -#define IRQPOS_EXTINT3 (2 * 4) -#define IRQPOS_EXTINT4 (3 * 4) -/* INTSEL3 */ -#define IRQPOS_PCCPW (0 * 4) - -/* IDE interrupt */ -#define IRQ_IDE0 67 /* iVDR */ - -/* SMC interrupt */ -#define SMC_IRQ 8 - -/* SM501 interrupt */ -#define SM501_IRQ 0 - -/* interrupt pin */ -#define IRQPIN_EXTINT1 0 /* IRQ0 pin */ -#define IRQPIN_EXTINT2 1 /* IRQ1 pin */ -#define IRQPIN_EXTINT3 2 /* IRQ2 pin */ -#define IRQPIN_SMC91CX 3 /* IRQ3 pin */ -#define IRQPIN_EXTINT4 4 /* IRQ4 pin */ -#define IRQPIN_PCC0 5 /* IRQ5 pin */ -#define IRQPIN_PCC2 6 /* IRQ6 pin */ -#define IRQPIN_SM501 7 /* IRQ7 pin */ -#define IRQPIN_PCCPW 7 /* IRQ7 pin */ - -/* arch/sh/boards/se/7780/irq.c */ -void init_se7780_IRQ(void); - -#define __IO_PREFIX se7780 -#include - -#endif /* __ASM_SH_SE7780_H */ diff --git a/include/asm-sh/sections.h b/include/asm-sh/sections.h deleted file mode 100644 index 8f8f4ad400d..00000000000 --- a/include/asm-sh/sections.h +++ /dev/null @@ -1,11 +0,0 @@ -#ifndef __ASM_SH_SECTIONS_H -#define __ASM_SH_SECTIONS_H - -#include - -extern long __machvec_start, __machvec_end; -extern char __uncached_start, __uncached_end; -extern char _ebss[]; - -#endif /* __ASM_SH_SECTIONS_H */ - diff --git a/include/asm-sh/segment.h b/include/asm-sh/segment.h deleted file mode 100644 index 5e2725f4ac4..00000000000 --- a/include/asm-sh/segment.h +++ /dev/null @@ -1,34 +0,0 @@ -#ifndef __ASM_SH_SEGMENT_H -#define __ASM_SH_SEGMENT_H - -#ifndef __ASSEMBLY__ - -typedef struct { - unsigned long seg; -} mm_segment_t; - -#define MAKE_MM_SEG(s) ((mm_segment_t) { (s) }) - -/* - * The fs value determines whether argument validity checking should be - * performed or not. If get_fs() == USER_DS, checking is performed, with - * get_fs() == KERNEL_DS, checking is bypassed. - * - * For historical reasons, these macros are grossly misnamed. - */ -#define KERNEL_DS MAKE_MM_SEG(0xFFFFFFFFUL) -#ifdef CONFIG_MMU -#define USER_DS MAKE_MM_SEG(PAGE_OFFSET) -#else -#define USER_DS KERNEL_DS -#endif - -#define segment_eq(a,b) ((a).seg == (b).seg) - -#define get_ds() (KERNEL_DS) - -#define get_fs() (current_thread_info()->addr_limit) -#define set_fs(x) (current_thread_info()->addr_limit = (x)) - -#endif /* __ASSEMBLY__ */ -#endif /* __ASM_SH_SEGMENT_H */ diff --git a/include/asm-sh/sembuf.h b/include/asm-sh/sembuf.h deleted file mode 100644 index d79f3bd570b..00000000000 --- a/include/asm-sh/sembuf.h +++ /dev/null @@ -1,25 +0,0 @@ -#ifndef __ASM_SH_SEMBUF_H -#define __ASM_SH_SEMBUF_H - -/* - * The semid64_ds structure for i386 architecture. - * Note extra padding because this structure is passed back and forth - * between kernel and user space. - * - * Pad space is left for: - * - 64-bit time_t to solve y2038 problem - * - 2 miscellaneous 32-bit values - */ - -struct semid64_ds { - struct ipc64_perm sem_perm; /* permissions .. see ipc.h */ - __kernel_time_t sem_otime; /* last semop time */ - unsigned long __unused1; - __kernel_time_t sem_ctime; /* last change time */ - unsigned long __unused2; - unsigned long sem_nsems; /* no. of semaphores in array */ - unsigned long __unused3; - unsigned long __unused4; -}; - -#endif /* __ASM_SH_SEMBUF_H */ diff --git a/include/asm-sh/serial.h b/include/asm-sh/serial.h deleted file mode 100644 index 21f6d330f18..00000000000 --- a/include/asm-sh/serial.h +++ /dev/null @@ -1,36 +0,0 @@ -/* - * include/asm-sh/serial.h - * - * Configuration details for 8250, 16450, 16550, etc. serial ports - */ - -#ifndef _ASM_SERIAL_H -#define _ASM_SERIAL_H - -#include - -/* - * This assumes you have a 1.8432 MHz clock for your UART. - * - * It'd be nice if someone built a serial card with a 24.576 MHz - * clock, since the 16550A is capable of handling a top speed of 1.5 - * megabits/second; but this requires the faster clock. - */ -#define BASE_BAUD ( 1843200 / 16 ) - -#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST) - -#ifdef CONFIG_HD64465 -#include - -#define SERIAL_PORT_DFNS \ - /* UART CLK PORT IRQ FLAGS */ \ - { 0, BASE_BAUD, 0x3F8, HD64465_IRQ_UART, STD_COM_FLAGS } /* ttyS0 */ - -#else - -#define SERIAL_PORT_DFNS - -#endif - -#endif /* _ASM_SERIAL_H */ diff --git a/include/asm-sh/setup.h b/include/asm-sh/setup.h deleted file mode 100644 index 55a2bd328d9..00000000000 --- a/include/asm-sh/setup.h +++ /dev/null @@ -1,27 +0,0 @@ -#ifndef _SH_SETUP_H -#define _SH_SETUP_H - -#define COMMAND_LINE_SIZE 256 - -#ifdef __KERNEL__ - -/* - * This is set up by the setup-routine at boot-time - */ -#define PARAM ((unsigned char *)empty_zero_page) - -#define MOUNT_ROOT_RDONLY (*(unsigned long *) (PARAM+0x000)) -#define RAMDISK_FLAGS (*(unsigned long *) (PARAM+0x004)) -#define ORIG_ROOT_DEV (*(unsigned long *) (PARAM+0x008)) -#define LOADER_TYPE (*(unsigned long *) (PARAM+0x00c)) -#define INITRD_START (*(unsigned long *) (PARAM+0x010)) -#define INITRD_SIZE (*(unsigned long *) (PARAM+0x014)) -/* ... */ -#define COMMAND_LINE ((char *) (PARAM+0x100)) - -int setup_early_printk(char *); -void sh_mv_setup(void); - -#endif /* __KERNEL__ */ - -#endif /* _SH_SETUP_H */ diff --git a/include/asm-sh/sfp-machine.h b/include/asm-sh/sfp-machine.h deleted file mode 100644 index d3c548443f2..00000000000 --- a/include/asm-sh/sfp-machine.h +++ /dev/null @@ -1,84 +0,0 @@ -/* Machine-dependent software floating-point definitions. - SuperH kernel version. - Copyright (C) 1997,1998,1999 Free Software Foundation, Inc. - This file is part of the GNU C Library. - Contributed by Richard Henderson (rth@cygnus.com), - Jakub Jelinek (jj@ultra.linux.cz), - David S. Miller (davem@redhat.com) and - Peter Maydell (pmaydell@chiark.greenend.org.uk). - - The GNU C Library is free software; you can redistribute it and/or - modify it under the terms of the GNU Library General Public License as - published by the Free Software Foundation; either version 2 of the - License, or (at your option) any later version. - - The GNU C Library is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Library General Public License for more details. - - You should have received a copy of the GNU Library General Public - License along with the GNU C Library; see the file COPYING.LIB. If - not, write to the Free Software Foundation, Inc., - 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ - -#ifndef _SFP_MACHINE_H -#define _SFP_MACHINE_H - -#define _FP_W_TYPE_SIZE 32 -#define _FP_W_TYPE unsigned long -#define _FP_WS_TYPE signed long -#define _FP_I_TYPE long - -#define _FP_MUL_MEAT_S(R,X,Y) \ - _FP_MUL_MEAT_1_wide(_FP_WFRACBITS_S,R,X,Y,umul_ppmm) -#define _FP_MUL_MEAT_D(R,X,Y) \ - _FP_MUL_MEAT_2_wide(_FP_WFRACBITS_D,R,X,Y,umul_ppmm) -#define _FP_MUL_MEAT_Q(R,X,Y) \ - _FP_MUL_MEAT_4_wide(_FP_WFRACBITS_Q,R,X,Y,umul_ppmm) - -#define _FP_DIV_MEAT_S(R,X,Y) _FP_DIV_MEAT_1_udiv(S,R,X,Y) -#define _FP_DIV_MEAT_D(R,X,Y) _FP_DIV_MEAT_2_udiv(D,R,X,Y) -#define _FP_DIV_MEAT_Q(R,X,Y) _FP_DIV_MEAT_4_udiv(Q,R,X,Y) - -#define _FP_NANFRAC_S ((_FP_QNANBIT_S << 1) - 1) -#define _FP_NANFRAC_D ((_FP_QNANBIT_D << 1) - 1), -1 -#define _FP_NANFRAC_Q ((_FP_QNANBIT_Q << 1) - 1), -1, -1, -1 -#define _FP_NANSIGN_S 0 -#define _FP_NANSIGN_D 0 -#define _FP_NANSIGN_Q 0 - -#define _FP_KEEPNANFRACP 1 - -/* - * If one NaN is signaling and the other is not, - * we choose that one, otherwise we choose X. - */ -#define _FP_CHOOSENAN(fs, wc, R, X, Y, OP) \ - do { \ - if ((_FP_FRAC_HIGH_RAW_##fs(X) & _FP_QNANBIT_##fs) \ - && !(_FP_FRAC_HIGH_RAW_##fs(Y) & _FP_QNANBIT_##fs)) \ - { \ - R##_s = Y##_s; \ - _FP_FRAC_COPY_##wc(R,Y); \ - } \ - else \ - { \ - R##_s = X##_s; \ - _FP_FRAC_COPY_##wc(R,X); \ - } \ - R##_c = FP_CLS_NAN; \ - } while (0) - -//#define FP_ROUNDMODE FPSCR_RM -#define FP_DENORM_ZERO 1/*FPSCR_DN*/ - -/* Exception flags. */ -#define FP_EX_INVALID (1<<4) -#define FP_EX_DIVZERO (1<<3) -#define FP_EX_OVERFLOW (1<<2) -#define FP_EX_UNDERFLOW (1<<1) -#define FP_EX_INEXACT (1<<0) - -#endif - diff --git a/include/asm-sh/sh03/io.h b/include/asm-sh/sh03/io.h deleted file mode 100644 index c39c785bba9..00000000000 --- a/include/asm-sh/sh03/io.h +++ /dev/null @@ -1,25 +0,0 @@ -/* - * include/asm-sh/sh03/io.h - * - * Copyright 2004 Interface Co.,Ltd. Saito.K - * - * IO functions for an Interface CTP/PCI-SH03 - */ - -#ifndef _ASM_SH_IO_SH03_H -#define _ASM_SH_IO_SH03_H - -#include - -#define IRL0_IRQ 2 -#define IRL0_PRIORITY 13 -#define IRL1_IRQ 5 -#define IRL1_PRIORITY 10 -#define IRL2_IRQ 8 -#define IRL2_PRIORITY 7 -#define IRL3_IRQ 11 -#define IRL3_PRIORITY 4 - -void heartbeat_sh03(void); - -#endif /* _ASM_SH_IO_SH03_H */ diff --git a/include/asm-sh/sh03/sh03.h b/include/asm-sh/sh03/sh03.h deleted file mode 100644 index 19c40b80428..00000000000 --- a/include/asm-sh/sh03/sh03.h +++ /dev/null @@ -1,18 +0,0 @@ -#ifndef __ASM_SH_SH03_H -#define __ASM_SH_SH03_H - -/* - * linux/include/asm-sh/sh03/sh03.h - * - * Copyright (C) 2004 Interface Co., Ltd. Saito.K - * - * Interface CTP/PCI-SH03 support - */ - -#define PA_PCI_IO (0xbe240000) /* PCI I/O space */ -#define PA_PCI_MEM (0xbd000000) /* PCI MEM space */ - -#define PCIPAR (0xa4000cf8) /* PCI Config address */ -#define PCIPDR (0xa4000cfc) /* PCI Config data */ - -#endif /* __ASM_SH_SH03_H */ diff --git a/include/asm-sh/sh7760fb.h b/include/asm-sh/sh7760fb.h deleted file mode 100644 index 8767f61acec..00000000000 --- a/include/asm-sh/sh7760fb.h +++ /dev/null @@ -1,197 +0,0 @@ -/* - * sh7760fb.h -- platform data for SH7760/SH7763 LCDC framebuffer driver. - * - * (c) 2006-2008 MSC Vertriebsges.m.b.H., - * Manuel Lauss - * (c) 2008 Nobuhiro Iwamatsu - */ - -#ifndef _ASM_SH_SH7760FB_H -#define _ASM_SH_SH7760FB_H - -/* - * some bits of the colormap registers should be written as zero. - * create a mask for that. - */ -#define SH7760FB_PALETTE_MASK 0x00f8fcf8 - -/* The LCDC dma engine always sets bits 27-26 to 1: this is Area3 */ -#define SH7760FB_DMA_MASK 0x0C000000 - -/* palette */ -#define LDPR(x) (((x) << 2)) - -/* framebuffer registers and bits */ -#define LDICKR 0x400 -#define LDMTR 0x402 -/* see sh7760fb.h for LDMTR bits */ -#define LDDFR 0x404 -#define LDDFR_PABD (1 << 8) -#define LDDFR_COLOR_MASK 0x7F -#define LDSMR 0x406 -#define LDSMR_ROT (1 << 13) -#define LDSARU 0x408 -#define LDSARL 0x40c -#define LDLAOR 0x410 -#define LDPALCR 0x412 -#define LDPALCR_PALS (1 << 4) -#define LDPALCR_PALEN (1 << 0) -#define LDHCNR 0x414 -#define LDHSYNR 0x416 -#define LDVDLNR 0x418 -#define LDVTLNR 0x41a -#define LDVSYNR 0x41c -#define LDACLNR 0x41e -#define LDINTR 0x420 -#define LDPMMR 0x424 -#define LDPSPR 0x426 -#define LDCNTR 0x428 -#define LDCNTR_DON (1 << 0) -#define LDCNTR_DON2 (1 << 4) - -#ifdef CONFIG_CPU_SUBTYPE_SH7763 -# define LDLIRNR 0x440 -/* LDINTR bit */ -# define LDINTR_MINTEN (1 << 15) -# define LDINTR_FINTEN (1 << 14) -# define LDINTR_VSINTEN (1 << 13) -# define LDINTR_VEINTEN (1 << 12) -# define LDINTR_MINTS (1 << 11) -# define LDINTR_FINTS (1 << 10) -# define LDINTR_VSINTS (1 << 9) -# define LDINTR_VEINTS (1 << 8) -# define VINT_START (LDINTR_VSINTEN) -# define VINT_CHECK (LDINTR_VSINTS) -#else -/* LDINTR bit */ -# define LDINTR_VINTSEL (1 << 12) -# define LDINTR_VINTE (1 << 8) -# define LDINTR_VINTS (1 << 0) -# define VINT_START (LDINTR_VINTSEL) -# define VINT_CHECK (LDINTR_VINTS) -#endif - -/* HSYNC polarity inversion */ -#define LDMTR_FLMPOL (1 << 15) - -/* VSYNC polarity inversion */ -#define LDMTR_CL1POL (1 << 14) - -/* DISPLAY-ENABLE polarity inversion */ -#define LDMTR_DISPEN_LOWACT (1 << 13) - -/* DISPLAY DATA BUS polarity inversion */ -#define LDMTR_DPOL_LOWACT (1 << 12) - -/* AC modulation signal enable */ -#define LDMTR_MCNT (1 << 10) - -/* Disable output of HSYNC during VSYNC period */ -#define LDMTR_CL1CNT (1 << 9) - -/* Disable output of VSYNC during VSYNC period */ -#define LDMTR_CL2CNT (1 << 8) - -/* Display types supported by the LCDC */ -#define LDMTR_STN_MONO_4 0x00 -#define LDMTR_STN_MONO_8 0x01 -#define LDMTR_STN_COLOR_4 0x08 -#define LDMTR_STN_COLOR_8 0x09 -#define LDMTR_STN_COLOR_12 0x0A -#define LDMTR_STN_COLOR_16 0x0B -#define LDMTR_DSTN_MONO_8 0x11 -#define LDMTR_DSTN_MONO_16 0x13 -#define LDMTR_DSTN_COLOR_8 0x19 -#define LDMTR_DSTN_COLOR_12 0x1A -#define LDMTR_DSTN_COLOR_16 0x1B -#define LDMTR_TFT_COLOR_16 0x2B - -/* framebuffer color layout */ -#define LDDFR_1BPP_MONO 0x00 -#define LDDFR_2BPP_MONO 0x01 -#define LDDFR_4BPP_MONO 0x02 -#define LDDFR_6BPP_MONO 0x04 -#define LDDFR_4BPP 0x0A -#define LDDFR_8BPP 0x0C -#define LDDFR_16BPP_RGB555 0x1D -#define LDDFR_16BPP_RGB565 0x2D - -/* LCDC Pixclock sources */ -#define LCDC_CLKSRC_BUSCLOCK 0 -#define LCDC_CLKSRC_PERIPHERAL 1 -#define LCDC_CLKSRC_EXTERNAL 2 - -#define LDICKR_CLKSRC(x) \ - (((x) & 3) << 12) - -/* LCDC pixclock input divider. Set to 1 at a minimum! */ -#define LDICKR_CLKDIV(x) \ - ((x) & 0x1f) - -struct sh7760fb_platdata { - - /* Set this member to a valid fb_videmode for the display you - * wish to use. The following members must be initialized: - * xres, yres, hsync_len, vsync_len, sync, - * {left,right,upper,lower}_margin. - * The driver uses the above members to calculate register values - * and memory requirements. Other members are ignored but may - * be used by other framebuffer layer components. - */ - struct fb_videomode *def_mode; - - /* LDMTR includes display type and signal polarity. The - * HSYNC/VSYNC polarities are derived from the fb_var_screeninfo - * data above; however the polarities of the following signals - * must be encoded in the ldmtr member: - * Display Enable signal (default high-active) DISPEN_LOWACT - * Display Data signals (default high-active) DPOL_LOWACT - * AC Modulation signal (default off) MCNT - * Hsync-During-Vsync suppression (default off) CL1CNT - * Vsync-during-vsync suppression (default off) CL2CNT - * NOTE: also set a display type! - * (one of LDMTR_{STN,DSTN,TFT}_{MONO,COLOR}_{4,8,12,16}) - */ - u16 ldmtr; - - /* LDDFR controls framebuffer image format (depth, organization) - * Use ONE of the LDDFR_?BPP_* macros! - */ - u16 lddfr; - - /* LDPMMR and LDPSPR control the timing of the power signals - * for the display. Please read the SH7760 Hardware Manual, - * Chapters 30.3.17, 30.3.18 and 30.4.6! - */ - u16 ldpmmr; - u16 ldpspr; - - /* LDACLNR contains the line numbers after which the AC modulation - * signal is to toggle. Set to ZERO for TFTs or displays which - * do not need it. (Chapter 30.3.15 in SH7760 Hardware Manual). - */ - u16 ldaclnr; - - /* LDICKR contains information on pixelclock source and config. - * Please use the LDICKR_CLKSRC() and LDICKR_CLKDIV() macros. - * minimal value for CLKDIV() must be 1!. - */ - u16 ldickr; - - /* set this member to 1 if you wish to use the LCDC's hardware - * rotation function. This is limited to displays <= 320x200 - * pixels resolution! - */ - int rotate; /* set to 1 to rotate 90 CCW */ - - /* set this to 1 to suppress vsync irq use. */ - int novsync; - - /* blanking hook for platform. Set this if your platform can do - * more than the LCDC in terms of blanking (e.g. disable clock - * generator / backlight power supply / etc. - */ - void (*blank) (int); -}; - -#endif /* _ASM_SH_SH7760FB_H */ diff --git a/include/asm-sh/sh7763rdp.h b/include/asm-sh/sh7763rdp.h deleted file mode 100644 index 8750cc85297..00000000000 --- a/include/asm-sh/sh7763rdp.h +++ /dev/null @@ -1,54 +0,0 @@ -#ifndef __ASM_SH_SH7763RDP_H -#define __ASM_SH_SH7763RDP_H - -/* - * linux/include/asm-sh/sh7763drp.h - * - * Copyright (C) 2008 Renesas Solutions - * Copyright (C) 2008 Nobuhiro Iwamatsu - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - */ -#include - -/* clock control */ -#define MSTPCR1 0xFFC80038 - -/* PORT */ -#define PORT_PSEL0 0xFFEF0070 -#define PORT_PSEL1 0xFFEF0072 -#define PORT_PSEL2 0xFFEF0074 -#define PORT_PSEL3 0xFFEF0076 -#define PORT_PSEL4 0xFFEF0078 - -#define PORT_PACR 0xFFEF0000 -#define PORT_PCCR 0xFFEF0004 -#define PORT_PFCR 0xFFEF000A -#define PORT_PGCR 0xFFEF000C -#define PORT_PHCR 0xFFEF000E -#define PORT_PICR 0xFFEF0010 -#define PORT_PJCR 0xFFEF0012 -#define PORT_PKCR 0xFFEF0014 -#define PORT_PLCR 0xFFEF0016 -#define PORT_PMCR 0xFFEF0018 -#define PORT_PNCR 0xFFEF001A - -/* FPGA */ -#define CPLD_BOARD_ID_ERV_REG 0xB1000000 -#define CPLD_CPLD_CMD_REG 0xB1000006 - -/* - * USB SH7763RDP board can use Host only. - */ -#define USB_USBHSC 0xFFEC80f0 - -/* arch/sh/boards/renesas/sh7763rdp/irq.c */ -void init_sh7763rdp_IRQ(void); -int sh7763rdp_irq_demux(int irq); -#define __IO_PREFIX sh7763rdp -#include - -#endif /* __ASM_SH_SH7763RDP_H */ diff --git a/include/asm-sh/sh7785lcr.h b/include/asm-sh/sh7785lcr.h deleted file mode 100644 index 1ce27d5c749..00000000000 --- a/include/asm-sh/sh7785lcr.h +++ /dev/null @@ -1,55 +0,0 @@ -#ifndef __ASM_SH_RENESAS_SH7785LCR_H -#define __ASM_SH_RENESAS_SH7785LCR_H - -/* - * This board has 2 physical memory maps. - * It can be changed with DIP switch(S2-5). - * - * phys address | S2-5 = OFF | S2-5 = ON - * -----------------------------+---------------+--------------- - * 0x00000000 - 0x03ffffff(CS0) | NOR Flash | NOR Flash - * 0x04000000 - 0x05ffffff(CS1) | PLD | PLD - * 0x06000000 - 0x07ffffff(CS1) | reserved | I2C - * 0x08000000 - 0x0bffffff(CS2) | USB | DDR SDRAM - * 0x0c000000 - 0x0fffffff(CS3) | SD | DDR SDRAM - * 0x10000000 - 0x13ffffff(CS4) | SM107 | SM107 - * 0x14000000 - 0x17ffffff(CS5) | I2C | USB - * 0x18000000 - 0x1bffffff(CS6) | reserved | SD - * 0x40000000 - 0x5fffffff | DDR SDRAM | (cannot use) - * - */ - -#define NOR_FLASH_ADDR 0x00000000 -#define NOR_FLASH_SIZE 0x04000000 - -#define PLD_BASE_ADDR 0x04000000 -#define PLD_PCICR (PLD_BASE_ADDR + 0x00) -#define PLD_LCD_BK_CONTR (PLD_BASE_ADDR + 0x02) -#define PLD_LOCALCR (PLD_BASE_ADDR + 0x04) -#define PLD_POFCR (PLD_BASE_ADDR + 0x06) -#define PLD_LEDCR (PLD_BASE_ADDR + 0x08) -#define PLD_SWSR (PLD_BASE_ADDR + 0x0a) -#define PLD_VERSR (PLD_BASE_ADDR + 0x0c) -#define PLD_MMSR (PLD_BASE_ADDR + 0x0e) - -#define SM107_MEM_ADDR 0x10000000 -#define SM107_MEM_SIZE 0x00e00000 -#define SM107_REG_ADDR 0x13e00000 -#define SM107_REG_SIZE 0x00200000 - -#if defined(CONFIG_SH_SH7785LCR_29BIT_PHYSMAPS) -#define R8A66597_ADDR 0x14000000 /* USB */ -#define CG200_ADDR 0x18000000 /* SD */ -#define PCA9564_ADDR 0x06000000 /* I2C */ -#else -#define R8A66597_ADDR 0x08000000 -#define CG200_ADDR 0x0c000000 -#define PCA9564_ADDR 0x14000000 -#endif - -#define R8A66597_SIZE 0x00000100 -#define CG200_SIZE 0x00010000 -#define PCA9564_SIZE 0x00000100 - -#endif /* __ASM_SH_RENESAS_SH7785LCR_H */ - diff --git a/include/asm-sh/sh_bios.h b/include/asm-sh/sh_bios.h deleted file mode 100644 index 0ca261956e3..00000000000 --- a/include/asm-sh/sh_bios.h +++ /dev/null @@ -1,19 +0,0 @@ -#ifndef __ASM_SH_BIOS_H -#define __ASM_SH_BIOS_H - -/* - * Copyright (C) 2000 Greg Banks, Mitch Davis - * C API to interface to the standard LinuxSH BIOS - * usually from within the early stages of kernel boot. - */ - - -extern void sh_bios_console_write(const char *buf, unsigned int len); -extern void sh_bios_char_out(char ch); -extern int sh_bios_in_gdb_mode(void); -extern void sh_bios_gdb_detach(void); - -extern void sh_bios_get_node_addr(unsigned char *node_addr); -extern void sh_bios_shutdown(unsigned int how); - -#endif /* __ASM_SH_BIOS_H */ diff --git a/include/asm-sh/sh_keysc.h b/include/asm-sh/sh_keysc.h deleted file mode 100644 index b5a4dd5a972..00000000000 --- a/include/asm-sh/sh_keysc.h +++ /dev/null @@ -1,13 +0,0 @@ -#ifndef __ASM_KEYSC_H__ -#define __ASM_KEYSC_H__ - -#define SH_KEYSC_MAXKEYS 30 - -struct sh_keysc_info { - enum { SH_KEYSC_MODE_1, SH_KEYSC_MODE_2, SH_KEYSC_MODE_3 } mode; - int scan_timing; /* 0 -> 7, see KYCR1, SCN[2:0] */ - int delay; - int keycodes[SH_KEYSC_MAXKEYS]; -}; - -#endif /* __ASM_KEYSC_H__ */ diff --git a/include/asm-sh/sh_mobile_lcdc.h b/include/asm-sh/sh_mobile_lcdc.h deleted file mode 100644 index 27677727df4..00000000000 --- a/include/asm-sh/sh_mobile_lcdc.h +++ /dev/null @@ -1,66 +0,0 @@ -#ifndef __ASM_SH_MOBILE_LCDC_H__ -#define __ASM_SH_MOBILE_LCDC_H__ - -#include - -enum { RGB8, /* 24bpp, 8:8:8 */ - RGB9, /* 18bpp, 9:9 */ - RGB12A, /* 24bpp, 12:12 */ - RGB12B, /* 12bpp */ - RGB16, /* 16bpp */ - RGB18, /* 18bpp */ - RGB24, /* 24bpp */ - SYS8A, /* 24bpp, 8:8:8 */ - SYS8B, /* 18bpp, 8:8:2 */ - SYS8C, /* 18bpp, 2:8:8 */ - SYS8D, /* 16bpp, 8:8 */ - SYS9, /* 18bpp, 9:9 */ - SYS12, /* 24bpp, 12:12 */ - SYS16A, /* 16bpp */ - SYS16B, /* 18bpp, 16:2 */ - SYS16C, /* 18bpp, 2:16 */ - SYS18, /* 18bpp */ - SYS24 };/* 24bpp */ - -enum { LCDC_CHAN_DISABLED = 0, - LCDC_CHAN_MAINLCD, - LCDC_CHAN_SUBLCD }; - -enum { LCDC_CLK_BUS, LCDC_CLK_PERIPHERAL, LCDC_CLK_EXTERNAL }; - -struct sh_mobile_lcdc_sys_bus_cfg { - unsigned long ldmt2r; - unsigned long ldmt3r; -}; - -struct sh_mobile_lcdc_sys_bus_ops { - void (*write_index)(void *handle, unsigned long data); - void (*write_data)(void *handle, unsigned long data); - unsigned long (*read_data)(void *handle); -}; - -struct sh_mobile_lcdc_board_cfg { - void *board_data; - int (*setup_sys)(void *board_data, void *sys_ops_handle, - struct sh_mobile_lcdc_sys_bus_ops *sys_ops); - void (*display_on)(void *board_data); - void (*display_off)(void *board_data); -}; - -struct sh_mobile_lcdc_chan_cfg { - int chan; - int bpp; - int interface_type; /* selects RGBn or SYSn I/F, see above */ - int clock_divider; - struct fb_videomode lcd_cfg; - struct sh_mobile_lcdc_board_cfg board_cfg; - struct sh_mobile_lcdc_sys_bus_cfg sys_bus_cfg; /* only for SYSn I/F */ -}; - -struct sh_mobile_lcdc_info { - unsigned long lddckr; - int clock_source; - struct sh_mobile_lcdc_chan_cfg ch[2]; -}; - -#endif /* __ASM_SH_MOBILE_LCDC_H__ */ diff --git a/include/asm-sh/shmbuf.h b/include/asm-sh/shmbuf.h deleted file mode 100644 index b2101f49052..00000000000 --- a/include/asm-sh/shmbuf.h +++ /dev/null @@ -1,42 +0,0 @@ -#ifndef __ASM_SH_SHMBUF_H -#define __ASM_SH_SHMBUF_H - -/* - * The shmid64_ds structure for i386 architecture. - * Note extra padding because this structure is passed back and forth - * between kernel and user space. - * - * Pad space is left for: - * - 64-bit time_t to solve y2038 problem - * - 2 miscellaneous 32-bit values - */ - -struct shmid64_ds { - struct ipc64_perm shm_perm; /* operation perms */ - size_t shm_segsz; /* size of segment (bytes) */ - __kernel_time_t shm_atime; /* last attach time */ - unsigned long __unused1; - __kernel_time_t shm_dtime; /* last detach time */ - unsigned long __unused2; - __kernel_time_t shm_ctime; /* last change time */ - unsigned long __unused3; - __kernel_pid_t shm_cpid; /* pid of creator */ - __kernel_pid_t shm_lpid; /* pid of last operator */ - unsigned long shm_nattch; /* no. of current attaches */ - unsigned long __unused4; - unsigned long __unused5; -}; - -struct shminfo64 { - unsigned long shmmax; - unsigned long shmmin; - unsigned long shmmni; - unsigned long shmseg; - unsigned long shmall; - unsigned long __unused1; - unsigned long __unused2; - unsigned long __unused3; - unsigned long __unused4; -}; - -#endif /* __ASM_SH_SHMBUF_H */ diff --git a/include/asm-sh/shmin.h b/include/asm-sh/shmin.h deleted file mode 100644 index 36ba138a81f..00000000000 --- a/include/asm-sh/shmin.h +++ /dev/null @@ -1,9 +0,0 @@ -#ifndef __ASM_SH_SHMIN_H -#define __ASM_SH_SHMIN_H - -#define SHMIN_IO_BASE 0xb0000000UL - -#define SHMIN_NE_IRQ IRQ2_IRQ -#define SHMIN_NE_BASE 0x300 - -#endif diff --git a/include/asm-sh/shmparam.h b/include/asm-sh/shmparam.h deleted file mode 100644 index ba1758d9010..00000000000 --- a/include/asm-sh/shmparam.h +++ /dev/null @@ -1,22 +0,0 @@ -/* - * include/asm-sh/shmparam.h - * - * Copyright (C) 1999 Niibe Yutaka - * Copyright (C) 2006 Paul Mundt - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ -#ifndef __ASM_SH_SHMPARAM_H -#define __ASM_SH_SHMPARAM_H - -/* - * SH-4 and SH-3 7705 have an aliasing dcache. Bump this up to a sensible value - * for everyone, and work out the specifics from the probed cache descriptor. - */ -#define SHMLBA 0x4000 /* attach addr a multiple of this */ - -#define __ARCH_FORCE_SHMLBA - -#endif /* __ASM_SH_SHMPARAM_H */ diff --git a/include/asm-sh/sigcontext.h b/include/asm-sh/sigcontext.h deleted file mode 100644 index 8ce1435bc0b..00000000000 --- a/include/asm-sh/sigcontext.h +++ /dev/null @@ -1,40 +0,0 @@ -#ifndef __ASM_SH_SIGCONTEXT_H -#define __ASM_SH_SIGCONTEXT_H - -struct sigcontext { - unsigned long oldmask; - -#if defined(__SH5__) || defined(CONFIG_CPU_SH5) - /* CPU registers */ - unsigned long long sc_regs[63]; - unsigned long long sc_tregs[8]; - unsigned long long sc_pc; - unsigned long long sc_sr; - - /* FPU registers */ - unsigned long long sc_fpregs[32]; - unsigned int sc_fpscr; - unsigned int sc_fpvalid; -#else - /* CPU registers */ - unsigned long sc_regs[16]; - unsigned long sc_pc; - unsigned long sc_pr; - unsigned long sc_sr; - unsigned long sc_gbr; - unsigned long sc_mach; - unsigned long sc_macl; - -#if defined(__SH4__) || defined(CONFIG_CPU_SH4) || \ - defined(__SH2A__) || defined(CONFIG_CPU_SH2A) - /* FPU registers */ - unsigned long sc_fpregs[16]; - unsigned long sc_xfpregs[16]; - unsigned int sc_fpscr; - unsigned int sc_fpul; - unsigned int sc_ownedfp; -#endif -#endif -}; - -#endif /* __ASM_SH_SIGCONTEXT_H */ diff --git a/include/asm-sh/siginfo.h b/include/asm-sh/siginfo.h deleted file mode 100644 index 813040ed68a..00000000000 --- a/include/asm-sh/siginfo.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef __ASM_SH_SIGINFO_H -#define __ASM_SH_SIGINFO_H - -#include - -#endif /* __ASM_SH_SIGINFO_H */ diff --git a/include/asm-sh/signal.h b/include/asm-sh/signal.h deleted file mode 100644 index 5c5c1e85208..00000000000 --- a/include/asm-sh/signal.h +++ /dev/null @@ -1,160 +0,0 @@ -#ifndef __ASM_SH_SIGNAL_H -#define __ASM_SH_SIGNAL_H - -#include - -/* Avoid too many header ordering problems. */ -struct pt_regs; -struct siginfo; - -#ifdef __KERNEL__ -/* Most things should be clean enough to redefine this at will, if care - is taken to make libc match. */ - -#define _NSIG 64 -#define _NSIG_BPW 32 -#define _NSIG_WORDS (_NSIG / _NSIG_BPW) - -typedef unsigned long old_sigset_t; /* at least 32 bits */ - -typedef struct { - unsigned long sig[_NSIG_WORDS]; -} sigset_t; - -#else -/* Here we must cater to libcs that poke about in kernel headers. */ - -#define NSIG 32 -typedef unsigned long sigset_t; - -#endif /* __KERNEL__ */ - -#define SIGHUP 1 -#define SIGINT 2 -#define SIGQUIT 3 -#define SIGILL 4 -#define SIGTRAP 5 -#define SIGABRT 6 -#define SIGIOT 6 -#define SIGBUS 7 -#define SIGFPE 8 -#define SIGKILL 9 -#define SIGUSR1 10 -#define SIGSEGV 11 -#define SIGUSR2 12 -#define SIGPIPE 13 -#define SIGALRM 14 -#define SIGTERM 15 -#define SIGSTKFLT 16 -#define SIGCHLD 17 -#define SIGCONT 18 -#define SIGSTOP 19 -#define SIGTSTP 20 -#define SIGTTIN 21 -#define SIGTTOU 22 -#define SIGURG 23 -#define SIGXCPU 24 -#define SIGXFSZ 25 -#define SIGVTALRM 26 -#define SIGPROF 27 -#define SIGWINCH 28 -#define SIGIO 29 -#define SIGPOLL SIGIO -/* -#define SIGLOST 29 -*/ -#define SIGPWR 30 -#define SIGSYS 31 -#define SIGUNUSED 31 - -/* These should not be considered constants from userland. */ -#define SIGRTMIN 32 -#define SIGRTMAX _NSIG - -/* - * SA_FLAGS values: - * - * SA_ONSTACK indicates that a registered stack_t will be used. - * SA_RESTART flag to get restarting signals (which were the default long ago) - * SA_NOCLDSTOP flag to turn off SIGCHLD when children stop. - * SA_RESETHAND clears the handler when the signal is delivered. - * SA_NOCLDWAIT flag on SIGCHLD to inhibit zombies. - * SA_NODEFER prevents the current signal from being masked in the handler. - * - * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single - * Unix names RESETHAND and NODEFER respectively. - */ -#define SA_NOCLDSTOP 0x00000001 -#define SA_NOCLDWAIT 0x00000002 -#define SA_SIGINFO 0x00000004 -#define SA_ONSTACK 0x08000000 -#define SA_RESTART 0x10000000 -#define SA_NODEFER 0x40000000 -#define SA_RESETHAND 0x80000000 - -#define SA_NOMASK SA_NODEFER -#define SA_ONESHOT SA_RESETHAND - -#define SA_RESTORER 0x04000000 - -/* - * sigaltstack controls - */ -#define SS_ONSTACK 1 -#define SS_DISABLE 2 - -#define MINSIGSTKSZ 2048 -#define SIGSTKSZ 8192 - -#include - -#ifdef __KERNEL__ -struct old_sigaction { - __sighandler_t sa_handler; - old_sigset_t sa_mask; - unsigned long sa_flags; - void (*sa_restorer)(void); -}; - -struct sigaction { - __sighandler_t sa_handler; - unsigned long sa_flags; - void (*sa_restorer)(void); - sigset_t sa_mask; /* mask last for extensibility */ -}; - -struct k_sigaction { - struct sigaction sa; -}; -#else -/* Here we must cater to libcs that poke about in kernel headers. */ - -struct sigaction { - union { - __sighandler_t _sa_handler; - void (*_sa_sigaction)(int, struct siginfo *, void *); - } _u; - sigset_t sa_mask; - unsigned long sa_flags; - void (*sa_restorer)(void); -}; - -#define sa_handler _u._sa_handler -#define sa_sigaction _u._sa_sigaction - -#endif /* __KERNEL__ */ - -typedef struct sigaltstack { - void *ss_sp; - int ss_flags; - size_t ss_size; -} stack_t; - -#ifdef __KERNEL__ -#include - -#define ptrace_signal_deliver(regs, cookie) do { } while (0) - -#endif /* __KERNEL__ */ - -#endif /* __ASM_SH_SIGNAL_H */ diff --git a/include/asm-sh/smc37c93x.h b/include/asm-sh/smc37c93x.h deleted file mode 100644 index 585da2a8fc4..00000000000 --- a/include/asm-sh/smc37c93x.h +++ /dev/null @@ -1,190 +0,0 @@ -#ifndef __ASM_SH_SMC37C93X_H -#define __ASM_SH_SMC37C93X_H - -/* - * linux/include/asm-sh/smc37c93x.h - * - * Copyright (C) 2000 Kazumoto Kojima - * - * SMSC 37C93x Super IO Chip support - */ - -/* Default base I/O address */ -#define FDC_PRIMARY_BASE 0x3f0 -#define IDE1_PRIMARY_BASE 0x1f0 -#define IDE1_SECONDARY_BASE 0x170 -#define PARPORT_PRIMARY_BASE 0x378 -#define COM1_PRIMARY_BASE 0x2f8 -#define COM2_PRIMARY_BASE 0x3f8 -#define RTC_PRIMARY_BASE 0x070 -#define KBC_PRIMARY_BASE 0x060 -#define AUXIO_PRIMARY_BASE 0x000 /* XXX */ - -/* Logical device number */ -#define LDN_FDC 0 -#define LDN_IDE1 1 -#define LDN_IDE2 2 -#define LDN_PARPORT 3 -#define LDN_COM1 4 -#define LDN_COM2 5 -#define LDN_RTC 6 -#define LDN_KBC 7 -#define LDN_AUXIO 8 - -/* Configuration port and key */ -#define CONFIG_PORT 0x3f0 -#define INDEX_PORT CONFIG_PORT -#define DATA_PORT 0x3f1 -#define CONFIG_ENTER 0x55 -#define CONFIG_EXIT 0xaa - -/* Configuration index */ -#define CURRENT_LDN_INDEX 0x07 -#define POWER_CONTROL_INDEX 0x22 -#define ACTIVATE_INDEX 0x30 -#define IO_BASE_HI_INDEX 0x60 -#define IO_BASE_LO_INDEX 0x61 -#define IRQ_SELECT_INDEX 0x70 -#define DMA_SELECT_INDEX 0x74 - -#define GPIO46_INDEX 0xc6 -#define GPIO47_INDEX 0xc7 - -/* UART stuff. Only for debugging. */ -/* UART Register */ - -#define UART_RBR 0x0 /* Receiver Buffer Register (Read Only) */ -#define UART_THR 0x0 /* Transmitter Holding Register (Write Only) */ -#define UART_IER 0x2 /* Interrupt Enable Register */ -#define UART_IIR 0x4 /* Interrupt Ident Register (Read Only) */ -#define UART_FCR 0x4 /* FIFO Control Register (Write Only) */ -#define UART_LCR 0x6 /* Line Control Register */ -#define UART_MCR 0x8 /* MODEM Control Register */ -#define UART_LSR 0xa /* Line Status Register */ -#define UART_MSR 0xc /* MODEM Status Register */ -#define UART_SCR 0xe /* Scratch Register */ -#define UART_DLL 0x0 /* Divisor Latch (LS) */ -#define UART_DLM 0x2 /* Divisor Latch (MS) */ - -#ifndef __ASSEMBLY__ -typedef struct uart_reg { - volatile __u16 rbr; - volatile __u16 ier; - volatile __u16 iir; - volatile __u16 lcr; - volatile __u16 mcr; - volatile __u16 lsr; - volatile __u16 msr; - volatile __u16 scr; -} uart_reg; -#endif /* ! __ASSEMBLY__ */ - -/* Alias for Write Only Register */ - -#define thr rbr -#define tcr iir - -/* Alias for Divisor Latch Register */ - -#define dll rbr -#define dlm ier -#define fcr iir - -/* Interrupt Enable Register */ - -#define IER_ERDAI 0x0100 /* Enable Received Data Available Interrupt */ -#define IER_ETHREI 0x0200 /* Enable Transmitter Holding Register Empty Interrupt */ -#define IER_ELSI 0x0400 /* Enable Receiver Line Status Interrupt */ -#define IER_EMSI 0x0800 /* Enable MODEM Status Interrupt */ - -/* Interrupt Ident Register */ - -#define IIR_IP 0x0100 /* "0" if Interrupt Pending */ -#define IIR_IIB0 0x0200 /* Interrupt ID Bit 0 */ -#define IIR_IIB1 0x0400 /* Interrupt ID Bit 1 */ -#define IIR_IIB2 0x0800 /* Interrupt ID Bit 2 */ -#define IIR_FIFO 0xc000 /* FIFOs enabled */ - -/* FIFO Control Register */ - -#define FCR_FEN 0x0100 /* FIFO enable */ -#define FCR_RFRES 0x0200 /* Receiver FIFO reset */ -#define FCR_TFRES 0x0400 /* Transmitter FIFO reset */ -#define FCR_DMA 0x0800 /* DMA mode select */ -#define FCR_RTL 0x4000 /* Receiver triger (LSB) */ -#define FCR_RTM 0x8000 /* Receiver triger (MSB) */ - -/* Line Control Register */ - -#define LCR_WLS0 0x0100 /* Word Length Select Bit 0 */ -#define LCR_WLS1 0x0200 /* Word Length Select Bit 1 */ -#define LCR_STB 0x0400 /* Number of Stop Bits */ -#define LCR_PEN 0x0800 /* Parity Enable */ -#define LCR_EPS 0x1000 /* Even Parity Select */ -#define LCR_SP 0x2000 /* Stick Parity */ -#define LCR_SB 0x4000 /* Set Break */ -#define LCR_DLAB 0x8000 /* Divisor Latch Access Bit */ - -/* MODEM Control Register */ - -#define MCR_DTR 0x0100 /* Data Terminal Ready */ -#define MCR_RTS 0x0200 /* Request to Send */ -#define MCR_OUT1 0x0400 /* Out 1 */ -#define MCR_IRQEN 0x0800 /* IRQ Enable */ -#define MCR_LOOP 0x1000 /* Loop */ - -/* Line Status Register */ - -#define LSR_DR 0x0100 /* Data Ready */ -#define LSR_OE 0x0200 /* Overrun Error */ -#define LSR_PE 0x0400 /* Parity Error */ -#define LSR_FE 0x0800 /* Framing Error */ -#define LSR_BI 0x1000 /* Break Interrupt */ -#define LSR_THRE 0x2000 /* Transmitter Holding Register Empty */ -#define LSR_TEMT 0x4000 /* Transmitter Empty */ -#define LSR_FIFOE 0x8000 /* Receiver FIFO error */ - -/* MODEM Status Register */ - -#define MSR_DCTS 0x0100 /* Delta Clear to Send */ -#define MSR_DDSR 0x0200 /* Delta Data Set Ready */ -#define MSR_TERI 0x0400 /* Trailing Edge Ring Indicator */ -#define MSR_DDCD 0x0800 /* Delta Data Carrier Detect */ -#define MSR_CTS 0x1000 /* Clear to Send */ -#define MSR_DSR 0x2000 /* Data Set Ready */ -#define MSR_RI 0x4000 /* Ring Indicator */ -#define MSR_DCD 0x8000 /* Data Carrier Detect */ - -/* Baud Rate Divisor */ - -#define UART_CLK (1843200) /* 1.8432 MHz */ -#define UART_BAUD(x) (UART_CLK / (16 * (x))) - -/* RTC register definition */ -#define RTC_SECONDS 0 -#define RTC_SECONDS_ALARM 1 -#define RTC_MINUTES 2 -#define RTC_MINUTES_ALARM 3 -#define RTC_HOURS 4 -#define RTC_HOURS_ALARM 5 -#define RTC_DAY_OF_WEEK 6 -#define RTC_DAY_OF_MONTH 7 -#define RTC_MONTH 8 -#define RTC_YEAR 9 -#define RTC_FREQ_SELECT 10 -# define RTC_UIP 0x80 -# define RTC_DIV_CTL 0x70 -/* This RTC can work under 32.768KHz clock only. */ -# define RTC_OSC_ENABLE 0x20 -# define RTC_OSC_DISABLE 0x00 -#define RTC_CONTROL 11 -# define RTC_SET 0x80 -# define RTC_PIE 0x40 -# define RTC_AIE 0x20 -# define RTC_UIE 0x10 -# define RTC_SQWE 0x08 -# define RTC_DM_BINARY 0x04 -# define RTC_24H 0x02 -# define RTC_DST_EN 0x01 - -#endif /* __ASM_SH_SMC37C93X_H */ diff --git a/include/asm-sh/smp.h b/include/asm-sh/smp.h deleted file mode 100644 index 593343cd26e..00000000000 --- a/include/asm-sh/smp.h +++ /dev/null @@ -1,50 +0,0 @@ -#ifndef __ASM_SH_SMP_H -#define __ASM_SH_SMP_H - -#include -#include - -#ifdef CONFIG_SMP - -#include -#include -#include - -#define raw_smp_processor_id() (current_thread_info()->cpu) -#define hard_smp_processor_id() plat_smp_processor_id() - -/* Map from cpu id to sequential logical cpu number. */ -extern int __cpu_number_map[NR_CPUS]; -#define cpu_number_map(cpu) __cpu_number_map[cpu] - -/* The reverse map from sequential logical cpu number to cpu id. */ -extern int __cpu_logical_map[NR_CPUS]; -#define cpu_logical_map(cpu) __cpu_logical_map[cpu] - -/* I've no idea what the real meaning of this is */ -#define PROC_CHANGE_PENALTY 20 - -#define NO_PROC_ID (-1) - -#define SMP_MSG_FUNCTION 0 -#define SMP_MSG_RESCHEDULE 1 -#define SMP_MSG_FUNCTION_SINGLE 2 -#define SMP_MSG_NR 3 - -void plat_smp_setup(void); -void plat_prepare_cpus(unsigned int max_cpus); -int plat_smp_processor_id(void); -void plat_start_cpu(unsigned int cpu, unsigned long entry_point); -void plat_send_ipi(unsigned int cpu, unsigned int message); -int plat_register_ipi_handler(unsigned int message, - void (*handler)(void *), void *arg); -extern void arch_send_call_function_single_ipi(int cpu); -extern void arch_send_call_function_ipi(cpumask_t mask); - -#else - -#define hard_smp_processor_id() (0) - -#endif /* CONFIG_SMP */ - -#endif /* __ASM_SH_SMP_H */ diff --git a/include/asm-sh/snapgear.h b/include/asm-sh/snapgear.h deleted file mode 100644 index 042d95f51c4..00000000000 --- a/include/asm-sh/snapgear.h +++ /dev/null @@ -1,71 +0,0 @@ -/* - * include/asm-sh/snapgear.h - * - * Modified version of io_se.h for the snapgear-specific functions. - * - * May be copied or modified under the terms of the GNU General Public - * License. See linux/COPYING for more information. - * - * IO functions for a SnapGear - */ - -#ifndef _ASM_SH_IO_SNAPGEAR_H -#define _ASM_SH_IO_SNAPGEAR_H - -#if defined(CONFIG_CPU_SH4) -/* - * The external interrupt lines, these take up ints 0 - 15 inclusive - * depending on the priority for the interrupt. In fact the priority - * is the interrupt :-) - */ - -#define IRL0_IRQ 2 -#define IRL0_PRIORITY 13 - -#define IRL1_IRQ 5 -#define IRL1_PRIORITY 10 - -#define IRL2_IRQ 8 -#define IRL2_PRIORITY 7 - -#define IRL3_IRQ 11 -#define IRL3_PRIORITY 4 -#endif - -#define __IO_PREFIX snapgear -#include - -#ifdef CONFIG_SH_SECUREEDGE5410 -/* - * We need to remember what was written to the ioport as some bits - * are shared with other functions and you cannot read back what was - * written :-| - * - * Bit Read Write - * ----------------------------------------------- - * D0 DCD on ttySC1 power - * D1 Reset Switch heatbeat - * D2 ttySC0 CTS (7100) LAN - * D3 - WAN - * D4 ttySC0 DCD (7100) CONSOLE - * D5 - ONLINE - * D6 - VPN - * D7 - DTR on ttySC1 - * D8 - ttySC0 RTS (7100) - * D9 - ttySC0 DTR (7100) - * D10 - RTC SCLK - * D11 RTC DATA RTC DATA - * D12 - RTS RESET - */ - -#define SECUREEDGE_IOPORT_ADDR ((volatile short *) 0xb0000000) -extern unsigned short secureedge5410_ioport; - -#define SECUREEDGE_WRITE_IOPORT(val, mask) (*SECUREEDGE_IOPORT_ADDR = \ - (secureedge5410_ioport = \ - ((secureedge5410_ioport & ~(mask)) | ((val) & (mask))))) -#define SECUREEDGE_READ_IOPORT() \ - ((*SECUREEDGE_IOPORT_ADDR&0x0817) | (secureedge5410_ioport&~0x0817)) -#endif - -#endif /* _ASM_SH_IO_SNAPGEAR_H */ diff --git a/include/asm-sh/socket.h b/include/asm-sh/socket.h deleted file mode 100644 index 6d4bf651295..00000000000 --- a/include/asm-sh/socket.h +++ /dev/null @@ -1,57 +0,0 @@ -#ifndef __ASM_SH_SOCKET_H -#define __ASM_SH_SOCKET_H - -#include - -/* For setsockopt(2) */ -#define SOL_SOCKET 1 - -#define SO_DEBUG 1 -#define SO_REUSEADDR 2 -#define SO_TYPE 3 -#define SO_ERROR 4 -#define SO_DONTROUTE 5 -#define SO_BROADCAST 6 -#define SO_SNDBUF 7 -#define SO_RCVBUF 8 -#define SO_RCVBUFFORCE 32 -#define SO_SNDBUFFORCE 33 -#define SO_KEEPALIVE 9 -#define SO_OOBINLINE 10 -#define SO_NO_CHECK 11 -#define SO_PRIORITY 12 -#define SO_LINGER 13 -#define SO_BSDCOMPAT 14 -/* To add :#define SO_REUSEPORT 15 */ -#define SO_PASSCRED 16 -#define SO_PEERCRED 17 -#define SO_RCVLOWAT 18 -#define SO_SNDLOWAT 19 -#define SO_RCVTIMEO 20 -#define SO_SNDTIMEO 21 - -/* Security levels - as per NRL IPv6 - don't actually do anything */ -#define SO_SECURITY_AUTHENTICATION 22 -#define SO_SECURITY_ENCRYPTION_TRANSPORT 23 -#define SO_SECURITY_ENCRYPTION_NETWORK 24 - -#define SO_BINDTODEVICE 25 - -/* Socket filtering */ -#define SO_ATTACH_FILTER 26 -#define SO_DETACH_FILTER 27 - -#define SO_PEERNAME 28 -#define SO_TIMESTAMP 29 -#define SCM_TIMESTAMP SO_TIMESTAMP - -#define SO_ACCEPTCONN 30 - -#define SO_PEERSEC 31 -#define SO_PASSSEC 34 -#define SO_TIMESTAMPNS 35 -#define SCM_TIMESTAMPNS SO_TIMESTAMPNS - -#define SO_MARK 36 - -#endif /* __ASM_SH_SOCKET_H */ diff --git a/include/asm-sh/sockios.h b/include/asm-sh/sockios.h deleted file mode 100644 index cf8b96b1f9a..00000000000 --- a/include/asm-sh/sockios.h +++ /dev/null @@ -1,14 +0,0 @@ -#ifndef __ASM_SH_SOCKIOS_H -#define __ASM_SH_SOCKIOS_H - -/* Socket-level I/O control calls. */ -#define FIOGETOWN _IOR('f', 123, int) -#define FIOSETOWN _IOW('f', 124, int) - -#define SIOCATMARK _IOR('s', 7, int) -#define SIOCSPGRP _IOW('s', 8, pid_t) -#define SIOCGPGRP _IOR('s', 9, pid_t) - -#define SIOCGSTAMP _IOR('s', 100, struct timeval) /* Get stamp (timeval) */ -#define SIOCGSTAMPNS _IOR('s', 101, struct timespec) /* Get stamp (timespec) */ -#endif /* __ASM_SH_SOCKIOS_H */ diff --git a/include/asm-sh/sparsemem.h b/include/asm-sh/sparsemem.h deleted file mode 100644 index 547a540b666..00000000000 --- a/include/asm-sh/sparsemem.h +++ /dev/null @@ -1,16 +0,0 @@ -#ifndef __ASM_SH_SPARSEMEM_H -#define __ASM_SH_SPARSEMEM_H - -#ifdef __KERNEL__ -/* - * SECTION_SIZE_BITS 2^N: how big each section will be - * MAX_PHYSADDR_BITS 2^N: how much physical address space we have - * MAX_PHYSMEM_BITS 2^N: how much memory we can have in that space - */ -#define SECTION_SIZE_BITS 26 -#define MAX_PHYSADDR_BITS 32 -#define MAX_PHYSMEM_BITS 32 - -#endif - -#endif /* __ASM_SH_SPARSEMEM_H */ diff --git a/include/asm-sh/spi.h b/include/asm-sh/spi.h deleted file mode 100644 index e96f5b0953c..00000000000 --- a/include/asm-sh/spi.h +++ /dev/null @@ -1,13 +0,0 @@ -#ifndef __ASM_SPI_H__ -#define __ASM_SPI_H__ - -struct sh_spi_info; - -struct sh_spi_info { - int bus_num; - int num_chipselect; - - void (*chip_select)(struct sh_spi_info *spi, int cs, int state); -}; - -#endif /* __ASM_SPI_H__ */ diff --git a/include/asm-sh/spinlock.h b/include/asm-sh/spinlock.h deleted file mode 100644 index e793181d64d..00000000000 --- a/include/asm-sh/spinlock.h +++ /dev/null @@ -1,223 +0,0 @@ -/* - * include/asm-sh/spinlock.h - * - * Copyright (C) 2002, 2003 Paul Mundt - * Copyright (C) 2006, 2007 Akio Idehara - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ -#ifndef __ASM_SH_SPINLOCK_H -#define __ASM_SH_SPINLOCK_H - -/* - * The only locking implemented here uses SH-4A opcodes. For others, - * split this out as per atomic-*.h. - */ -#ifndef CONFIG_CPU_SH4A -#error "Need movli.l/movco.l for spinlocks" -#endif - -/* - * Your basic SMP spinlocks, allowing only a single CPU anywhere - */ - -#define __raw_spin_is_locked(x) ((x)->lock <= 0) -#define __raw_spin_lock_flags(lock, flags) __raw_spin_lock(lock) -#define __raw_spin_unlock_wait(x) \ - do { cpu_relax(); } while ((x)->lock) - -/* - * Simple spin lock operations. There are two variants, one clears IRQ's - * on the local processor, one does not. - * - * We make no fairness assumptions. They have a cost. - */ -static inline void __raw_spin_lock(raw_spinlock_t *lock) -{ - unsigned long tmp; - unsigned long oldval; - - __asm__ __volatile__ ( - "1: \n\t" - "movli.l @%2, %0 ! __raw_spin_lock \n\t" - "mov %0, %1 \n\t" - "mov #0, %0 \n\t" - "movco.l %0, @%2 \n\t" - "bf 1b \n\t" - "cmp/pl %1 \n\t" - "bf 1b \n\t" - : "=&z" (tmp), "=&r" (oldval) - : "r" (&lock->lock) - : "t", "memory" - ); -} - -static inline void __raw_spin_unlock(raw_spinlock_t *lock) -{ - unsigned long tmp; - - __asm__ __volatile__ ( - "mov #1, %0 ! __raw_spin_unlock \n\t" - "mov.l %0, @%1 \n\t" - : "=&z" (tmp) - : "r" (&lock->lock) - : "t", "memory" - ); -} - -static inline int __raw_spin_trylock(raw_spinlock_t *lock) -{ - unsigned long tmp, oldval; - - __asm__ __volatile__ ( - "1: \n\t" - "movli.l @%2, %0 ! __raw_spin_trylock \n\t" - "mov %0, %1 \n\t" - "mov #0, %0 \n\t" - "movco.l %0, @%2 \n\t" - "bf 1b \n\t" - "synco \n\t" - : "=&z" (tmp), "=&r" (oldval) - : "r" (&lock->lock) - : "t", "memory" - ); - - return oldval; -} - -/* - * Read-write spinlocks, allowing multiple readers but only one writer. - * - * NOTE! it is quite common to have readers in interrupts but no interrupt - * writers. For those circumstances we can "mix" irq-safe locks - any writer - * needs to get a irq-safe write-lock, but readers can get non-irqsafe - * read-locks. - */ - -/** - * read_can_lock - would read_trylock() succeed? - * @lock: the rwlock in question. - */ -#define __raw_read_can_lock(x) ((x)->lock > 0) - -/** - * write_can_lock - would write_trylock() succeed? - * @lock: the rwlock in question. - */ -#define __raw_write_can_lock(x) ((x)->lock == RW_LOCK_BIAS) - -static inline void __raw_read_lock(raw_rwlock_t *rw) -{ - unsigned long tmp; - - __asm__ __volatile__ ( - "1: \n\t" - "movli.l @%1, %0 ! __raw_read_lock \n\t" - "cmp/pl %0 \n\t" - "bf 1b \n\t" - "add #-1, %0 \n\t" - "movco.l %0, @%1 \n\t" - "bf 1b \n\t" - : "=&z" (tmp) - : "r" (&rw->lock) - : "t", "memory" - ); -} - -static inline void __raw_read_unlock(raw_rwlock_t *rw) -{ - unsigned long tmp; - - __asm__ __volatile__ ( - "1: \n\t" - "movli.l @%1, %0 ! __raw_read_unlock \n\t" - "add #1, %0 \n\t" - "movco.l %0, @%1 \n\t" - "bf 1b \n\t" - : "=&z" (tmp) - : "r" (&rw->lock) - : "t", "memory" - ); -} - -static inline void __raw_write_lock(raw_rwlock_t *rw) -{ - unsigned long tmp; - - __asm__ __volatile__ ( - "1: \n\t" - "movli.l @%1, %0 ! __raw_write_lock \n\t" - "cmp/hs %2, %0 \n\t" - "bf 1b \n\t" - "sub %2, %0 \n\t" - "movco.l %0, @%1 \n\t" - "bf 1b \n\t" - : "=&z" (tmp) - : "r" (&rw->lock), "r" (RW_LOCK_BIAS) - : "t", "memory" - ); -} - -static inline void __raw_write_unlock(raw_rwlock_t *rw) -{ - __asm__ __volatile__ ( - "mov.l %1, @%0 ! __raw_write_unlock \n\t" - : - : "r" (&rw->lock), "r" (RW_LOCK_BIAS) - : "t", "memory" - ); -} - -static inline int __raw_read_trylock(raw_rwlock_t *rw) -{ - unsigned long tmp, oldval; - - __asm__ __volatile__ ( - "1: \n\t" - "movli.l @%2, %0 ! __raw_read_trylock \n\t" - "mov %0, %1 \n\t" - "cmp/pl %0 \n\t" - "bf 2f \n\t" - "add #-1, %0 \n\t" - "movco.l %0, @%2 \n\t" - "bf 1b \n\t" - "2: \n\t" - "synco \n\t" - : "=&z" (tmp), "=&r" (oldval) - : "r" (&rw->lock) - : "t", "memory" - ); - - return (oldval > 0); -} - -static inline int __raw_write_trylock(raw_rwlock_t *rw) -{ - unsigned long tmp, oldval; - - __asm__ __volatile__ ( - "1: \n\t" - "movli.l @%2, %0 ! __raw_write_trylock \n\t" - "mov %0, %1 \n\t" - "cmp/hs %3, %0 \n\t" - "bf 2f \n\t" - "sub %3, %0 \n\t" - "2: \n\t" - "movco.l %0, @%2 \n\t" - "bf 1b \n\t" - "synco \n\t" - : "=&z" (tmp), "=&r" (oldval) - : "r" (&rw->lock), "r" (RW_LOCK_BIAS) - : "t", "memory" - ); - - return (oldval > (RW_LOCK_BIAS - 1)); -} - -#define _raw_spin_relax(lock) cpu_relax() -#define _raw_read_relax(lock) cpu_relax() -#define _raw_write_relax(lock) cpu_relax() - -#endif /* __ASM_SH_SPINLOCK_H */ diff --git a/include/asm-sh/spinlock_types.h b/include/asm-sh/spinlock_types.h deleted file mode 100644 index b4d244e7b60..00000000000 --- a/include/asm-sh/spinlock_types.h +++ /dev/null @@ -1,21 +0,0 @@ -#ifndef __ASM_SH_SPINLOCK_TYPES_H -#define __ASM_SH_SPINLOCK_TYPES_H - -#ifndef __LINUX_SPINLOCK_TYPES_H -# error "please don't include this file directly" -#endif - -typedef struct { - volatile unsigned int lock; -} raw_spinlock_t; - -#define __RAW_SPIN_LOCK_UNLOCKED { 1 } - -typedef struct { - volatile unsigned int lock; -} raw_rwlock_t; - -#define RW_LOCK_BIAS 0x01000000 -#define __RAW_RW_LOCK_UNLOCKED { RW_LOCK_BIAS } - -#endif diff --git a/include/asm-sh/stat.h b/include/asm-sh/stat.h deleted file mode 100644 index e1810cc6e3d..00000000000 --- a/include/asm-sh/stat.h +++ /dev/null @@ -1,138 +0,0 @@ -#ifndef __ASM_SH_STAT_H -#define __ASM_SH_STAT_H - -struct __old_kernel_stat { - unsigned short st_dev; - unsigned short st_ino; - unsigned short st_mode; - unsigned short st_nlink; - unsigned short st_uid; - unsigned short st_gid; - unsigned short st_rdev; - unsigned long st_size; - unsigned long st_atime; - unsigned long st_mtime; - unsigned long st_ctime; -}; - -#if defined(__SH5__) || defined(CONFIG_CPU_SH5) -struct stat { - unsigned short st_dev; - unsigned short __pad1; - unsigned long st_ino; - unsigned short st_mode; - unsigned short st_nlink; - unsigned short st_uid; - unsigned short st_gid; - unsigned short st_rdev; - unsigned short __pad2; - unsigned long st_size; - unsigned long st_blksize; - unsigned long st_blocks; - unsigned long st_atime; - unsigned long st_atime_nsec; - unsigned long st_mtime; - unsigned long st_mtime_nsec; - unsigned long st_ctime; - unsigned long st_ctime_nsec; - unsigned long __unused4; - unsigned long __unused5; -}; - -/* This matches struct stat64 in glibc2.1, hence the absolutely - * insane amounts of padding around dev_t's. - */ -struct stat64 { - unsigned short st_dev; - unsigned char __pad0[10]; - - unsigned long st_ino; - unsigned int st_mode; - unsigned int st_nlink; - - unsigned long st_uid; - unsigned long st_gid; - - unsigned short st_rdev; - unsigned char __pad3[10]; - - long long st_size; - unsigned long st_blksize; - - unsigned long st_blocks; /* Number 512-byte blocks allocated. */ - unsigned long __pad4; /* future possible st_blocks high bits */ - - unsigned long st_atime; - unsigned long st_atime_nsec; - - unsigned long st_mtime; - unsigned long st_mtime_nsec; - - unsigned long st_ctime; - unsigned long st_ctime_nsec; /* will be high 32 bits of ctime someday */ - - unsigned long __unused1; - unsigned long __unused2; -}; -#else -struct stat { - unsigned long st_dev; - unsigned long st_ino; - unsigned short st_mode; - unsigned short st_nlink; - unsigned short st_uid; - unsigned short st_gid; - unsigned long st_rdev; - unsigned long st_size; - unsigned long st_blksize; - unsigned long st_blocks; - unsigned long st_atime; - unsigned long st_atime_nsec; - unsigned long st_mtime; - unsigned long st_mtime_nsec; - unsigned long st_ctime; - unsigned long st_ctime_nsec; - unsigned long __unused4; - unsigned long __unused5; -}; - -/* This matches struct stat64 in glibc2.1, hence the absolutely - * insane amounts of padding around dev_t's. - */ -struct stat64 { - unsigned long long st_dev; - unsigned char __pad0[4]; - -#define STAT64_HAS_BROKEN_ST_INO 1 - unsigned long __st_ino; - - unsigned int st_mode; - unsigned int st_nlink; - - unsigned long st_uid; - unsigned long st_gid; - - unsigned long long st_rdev; - unsigned char __pad3[4]; - - long long st_size; - unsigned long st_blksize; - - unsigned long long st_blocks; /* Number 512-byte blocks allocated. */ - - unsigned long st_atime; - unsigned long st_atime_nsec; - - unsigned long st_mtime; - unsigned long st_mtime_nsec; - - unsigned long st_ctime; - unsigned long st_ctime_nsec; - - unsigned long long st_ino; -}; - -#define STAT_HAVE_NSEC 1 -#endif - -#endif /* __ASM_SH_STAT_H */ diff --git a/include/asm-sh/statfs.h b/include/asm-sh/statfs.h deleted file mode 100644 index 9202a023328..00000000000 --- a/include/asm-sh/statfs.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef __ASM_SH_STATFS_H -#define __ASM_SH_STATFS_H - -#include - -#endif /* __ASM_SH_STATFS_H */ diff --git a/include/asm-sh/string.h b/include/asm-sh/string.h deleted file mode 100644 index 8c1ea21dc0a..00000000000 --- a/include/asm-sh/string.h +++ /dev/null @@ -1,5 +0,0 @@ -#ifdef CONFIG_SUPERH32 -# include "string_32.h" -#else -# include "string_64.h" -#endif diff --git a/include/asm-sh/string_32.h b/include/asm-sh/string_32.h deleted file mode 100644 index 55f8db6bc1d..00000000000 --- a/include/asm-sh/string_32.h +++ /dev/null @@ -1,131 +0,0 @@ -#ifndef __ASM_SH_STRING_H -#define __ASM_SH_STRING_H - -#ifdef __KERNEL__ - -/* - * Copyright (C) 1999 Niibe Yutaka - * But consider these trivial functions to be public domain. - */ - -#define __HAVE_ARCH_STRCPY -static inline char *strcpy(char *__dest, const char *__src) -{ - register char *__xdest = __dest; - unsigned long __dummy; - - __asm__ __volatile__("1:\n\t" - "mov.b @%1+, %2\n\t" - "mov.b %2, @%0\n\t" - "cmp/eq #0, %2\n\t" - "bf/s 1b\n\t" - " add #1, %0\n\t" - : "=r" (__dest), "=r" (__src), "=&z" (__dummy) - : "0" (__dest), "1" (__src) - : "memory", "t"); - - return __xdest; -} - -#define __HAVE_ARCH_STRNCPY -static inline char *strncpy(char *__dest, const char *__src, size_t __n) -{ - register char *__xdest = __dest; - unsigned long __dummy; - - if (__n == 0) - return __xdest; - - __asm__ __volatile__( - "1:\n" - "mov.b @%1+, %2\n\t" - "mov.b %2, @%0\n\t" - "cmp/eq #0, %2\n\t" - "bt/s 2f\n\t" - " cmp/eq %5,%1\n\t" - "bf/s 1b\n\t" - " add #1, %0\n" - "2:" - : "=r" (__dest), "=r" (__src), "=&z" (__dummy) - : "0" (__dest), "1" (__src), "r" (__src+__n) - : "memory", "t"); - - return __xdest; -} - -#define __HAVE_ARCH_STRCMP -static inline int strcmp(const char *__cs, const char *__ct) -{ - register int __res; - unsigned long __dummy; - - __asm__ __volatile__( - "mov.b @%1+, %3\n" - "1:\n\t" - "mov.b @%0+, %2\n\t" - "cmp/eq #0, %3\n\t" - "bt 2f\n\t" - "cmp/eq %2, %3\n\t" - "bt/s 1b\n\t" - " mov.b @%1+, %3\n\t" - "add #-2, %1\n\t" - "mov.b @%1, %3\n\t" - "sub %3, %2\n" - "2:" - : "=r" (__cs), "=r" (__ct), "=&r" (__res), "=&z" (__dummy) - : "0" (__cs), "1" (__ct) - : "t"); - - return __res; -} - -#define __HAVE_ARCH_STRNCMP -static inline int strncmp(const char *__cs, const char *__ct, size_t __n) -{ - register int __res; - unsigned long __dummy; - - if (__n == 0) - return 0; - - __asm__ __volatile__( - "mov.b @%1+, %3\n" - "1:\n\t" - "mov.b @%0+, %2\n\t" - "cmp/eq %6, %0\n\t" - "bt/s 2f\n\t" - " cmp/eq #0, %3\n\t" - "bt/s 3f\n\t" - " cmp/eq %3, %2\n\t" - "bt/s 1b\n\t" - " mov.b @%1+, %3\n\t" - "add #-2, %1\n\t" - "mov.b @%1, %3\n" - "2:\n\t" - "sub %3, %2\n" - "3:" - :"=r" (__cs), "=r" (__ct), "=&r" (__res), "=&z" (__dummy) - : "0" (__cs), "1" (__ct), "r" (__cs+__n) - : "t"); - - return __res; -} - -#define __HAVE_ARCH_MEMSET -extern void *memset(void *__s, int __c, size_t __count); - -#define __HAVE_ARCH_MEMCPY -extern void *memcpy(void *__to, __const__ void *__from, size_t __n); - -#define __HAVE_ARCH_MEMMOVE -extern void *memmove(void *__dest, __const__ void *__src, size_t __n); - -#define __HAVE_ARCH_MEMCHR -extern void *memchr(const void *__s, int __c, size_t __n); - -#define __HAVE_ARCH_STRLEN -extern size_t strlen(const char *); - -#endif /* __KERNEL__ */ - -#endif /* __ASM_SH_STRING_H */ diff --git a/include/asm-sh/string_64.h b/include/asm-sh/string_64.h deleted file mode 100644 index aa1fef229c7..00000000000 --- a/include/asm-sh/string_64.h +++ /dev/null @@ -1,17 +0,0 @@ -#ifndef __ASM_SH_STRING_64_H -#define __ASM_SH_STRING_64_H - -/* - * include/asm-sh/string_64.h - * - * Copyright (C) 2000, 2001 Paolo Alberelli - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ - -#define __HAVE_ARCH_MEMCPY -extern void *memcpy(void *dest, const void *src, size_t count); - -#endif /* __ASM_SH_STRING_64_H */ diff --git a/include/asm-sh/system.h b/include/asm-sh/system.h deleted file mode 100644 index 056d68cd210..00000000000 --- a/include/asm-sh/system.h +++ /dev/null @@ -1,190 +0,0 @@ -#ifndef __ASM_SH_SYSTEM_H -#define __ASM_SH_SYSTEM_H - -/* - * Copyright (C) 1999, 2000 Niibe Yutaka & Kaz Kojima - * Copyright (C) 2002 Paul Mundt - */ - -#include -#include -#include -#include -#include - -#define AT_VECTOR_SIZE_ARCH 5 /* entries in ARCH_DLINFO */ - -#if defined(CONFIG_CPU_SH4A) || defined(CONFIG_CPU_SH5) -#define __icbi() \ -{ \ - unsigned long __addr; \ - __addr = 0xa8000000; \ - __asm__ __volatile__( \ - "icbi %0\n\t" \ - : /* no output */ \ - : "m" (__m(__addr))); \ -} -#endif - -/* - * A brief note on ctrl_barrier(), the control register write barrier. - * - * Legacy SH cores typically require a sequence of 8 nops after - * modification of a control register in order for the changes to take - * effect. On newer cores (like the sh4a and sh5) this is accomplished - * with icbi. - * - * Also note that on sh4a in the icbi case we can forego a synco for the - * write barrier, as it's not necessary for control registers. - * - * Historically we have only done this type of barrier for the MMUCR, but - * it's also necessary for the CCR, so we make it generic here instead. - */ -#if defined(CONFIG_CPU_SH4A) || defined(CONFIG_CPU_SH5) -#define mb() __asm__ __volatile__ ("synco": : :"memory") -#define rmb() mb() -#define wmb() __asm__ __volatile__ ("synco": : :"memory") -#define ctrl_barrier() __icbi() -#define read_barrier_depends() do { } while(0) -#else -#define mb() __asm__ __volatile__ ("": : :"memory") -#define rmb() mb() -#define wmb() __asm__ __volatile__ ("": : :"memory") -#define ctrl_barrier() __asm__ __volatile__ ("nop;nop;nop;nop;nop;nop;nop;nop") -#define read_barrier_depends() do { } while(0) -#endif - -#ifdef CONFIG_SMP -#define smp_mb() mb() -#define smp_rmb() rmb() -#define smp_wmb() wmb() -#define smp_read_barrier_depends() read_barrier_depends() -#else -#define smp_mb() barrier() -#define smp_rmb() barrier() -#define smp_wmb() barrier() -#define smp_read_barrier_depends() do { } while(0) -#endif - -#define set_mb(var, value) do { (void)xchg(&var, value); } while (0) - -#ifdef CONFIG_GUSA_RB -#include -#else -#include -#endif - -extern void __xchg_called_with_bad_pointer(void); - -#define __xchg(ptr, x, size) \ -({ \ - unsigned long __xchg__res; \ - volatile void *__xchg_ptr = (ptr); \ - switch (size) { \ - case 4: \ - __xchg__res = xchg_u32(__xchg_ptr, x); \ - break; \ - case 1: \ - __xchg__res = xchg_u8(__xchg_ptr, x); \ - break; \ - default: \ - __xchg_called_with_bad_pointer(); \ - __xchg__res = x; \ - break; \ - } \ - \ - __xchg__res; \ -}) - -#define xchg(ptr,x) \ - ((__typeof__(*(ptr)))__xchg((ptr),(unsigned long)(x), sizeof(*(ptr)))) - -/* This function doesn't exist, so you'll get a linker error - * if something tries to do an invalid cmpxchg(). */ -extern void __cmpxchg_called_with_bad_pointer(void); - -#define __HAVE_ARCH_CMPXCHG 1 - -static inline unsigned long __cmpxchg(volatile void * ptr, unsigned long old, - unsigned long new, int size) -{ - switch (size) { - case 4: - return __cmpxchg_u32(ptr, old, new); - } - __cmpxchg_called_with_bad_pointer(); - return old; -} - -#define cmpxchg(ptr,o,n) \ - ({ \ - __typeof__(*(ptr)) _o_ = (o); \ - __typeof__(*(ptr)) _n_ = (n); \ - (__typeof__(*(ptr))) __cmpxchg((ptr), (unsigned long)_o_, \ - (unsigned long)_n_, sizeof(*(ptr))); \ - }) - -extern void die(const char *str, struct pt_regs *regs, long err) __attribute__ ((noreturn)); - -extern void *set_exception_table_vec(unsigned int vec, void *handler); - -static inline void *set_exception_table_evt(unsigned int evt, void *handler) -{ - return set_exception_table_vec(evt >> 5, handler); -} - -/* - * SH-2A has both 16 and 32-bit opcodes, do lame encoding checks. - */ -#ifdef CONFIG_CPU_SH2A -extern unsigned int instruction_size(unsigned int insn); -#elif defined(CONFIG_SUPERH32) -#define instruction_size(insn) (2) -#else -#define instruction_size(insn) (4) -#endif - -extern unsigned long cached_to_uncached; - -extern struct dentry *sh_debugfs_root; - -void per_cpu_trap_init(void); - -asmlinkage void break_point_trap(void); - -#ifdef CONFIG_SUPERH32 -#define BUILD_TRAP_HANDLER(name) \ -asmlinkage void name##_trap_handler(unsigned long r4, unsigned long r5, \ - unsigned long r6, unsigned long r7, \ - struct pt_regs __regs) - -#define TRAP_HANDLER_DECL \ - struct pt_regs *regs = RELOC_HIDE(&__regs, 0); \ - unsigned int vec = regs->tra; \ - (void)vec; -#else -#define BUILD_TRAP_HANDLER(name) \ -asmlinkage void name##_trap_handler(unsigned int vec, struct pt_regs *regs) -#define TRAP_HANDLER_DECL -#endif - -BUILD_TRAP_HANDLER(address_error); -BUILD_TRAP_HANDLER(debug); -BUILD_TRAP_HANDLER(bug); -BUILD_TRAP_HANDLER(fpu_error); -BUILD_TRAP_HANDLER(fpu_state_restore); - -#define arch_align_stack(x) (x) - -struct mem_access { - unsigned long (*from)(void *dst, const void *src, unsigned long cnt); - unsigned long (*to)(void *dst, const void *src, unsigned long cnt); -}; - -#ifdef CONFIG_SUPERH32 -# include "system_32.h" -#else -# include "system_64.h" -#endif - -#endif diff --git a/include/asm-sh/system_32.h b/include/asm-sh/system_32.h deleted file mode 100644 index f11bcf0855e..00000000000 --- a/include/asm-sh/system_32.h +++ /dev/null @@ -1,102 +0,0 @@ -#ifndef __ASM_SH_SYSTEM_32_H -#define __ASM_SH_SYSTEM_32_H - -#include - -struct task_struct *__switch_to(struct task_struct *prev, - struct task_struct *next); - -/* - * switch_to() should switch tasks to task nr n, first - */ -#define switch_to(prev, next, last) \ -do { \ - register u32 *__ts1 __asm__ ("r1") = (u32 *)&prev->thread.sp; \ - register u32 *__ts2 __asm__ ("r2") = (u32 *)&prev->thread.pc; \ - register u32 *__ts4 __asm__ ("r4") = (u32 *)prev; \ - register u32 *__ts5 __asm__ ("r5") = (u32 *)next; \ - register u32 *__ts6 __asm__ ("r6") = (u32 *)&next->thread.sp; \ - register u32 __ts7 __asm__ ("r7") = next->thread.pc; \ - struct task_struct *__last; \ - \ - __asm__ __volatile__ ( \ - ".balign 4\n\t" \ - "stc.l gbr, @-r15\n\t" \ - "sts.l pr, @-r15\n\t" \ - "mov.l r8, @-r15\n\t" \ - "mov.l r9, @-r15\n\t" \ - "mov.l r10, @-r15\n\t" \ - "mov.l r11, @-r15\n\t" \ - "mov.l r12, @-r15\n\t" \ - "mov.l r13, @-r15\n\t" \ - "mov.l r14, @-r15\n\t" \ - "mov.l r15, @r1\t! save SP\n\t" \ - "mov.l @r6, r15\t! change to new stack\n\t" \ - "mova 1f, %0\n\t" \ - "mov.l %0, @r2\t! save PC\n\t" \ - "mov.l 2f, %0\n\t" \ - "jmp @%0\t! call __switch_to\n\t" \ - " lds r7, pr\t! with return to new PC\n\t" \ - ".balign 4\n" \ - "2:\n\t" \ - ".long __switch_to\n" \ - "1:\n\t" \ - "mov.l @r15+, r14\n\t" \ - "mov.l @r15+, r13\n\t" \ - "mov.l @r15+, r12\n\t" \ - "mov.l @r15+, r11\n\t" \ - "mov.l @r15+, r10\n\t" \ - "mov.l @r15+, r9\n\t" \ - "mov.l @r15+, r8\n\t" \ - "lds.l @r15+, pr\n\t" \ - "ldc.l @r15+, gbr\n\t" \ - : "=z" (__last) \ - : "r" (__ts1), "r" (__ts2), "r" (__ts4), \ - "r" (__ts5), "r" (__ts6), "r" (__ts7) \ - : "r3", "t"); \ - \ - last = __last; \ -} while (0) - -#define __uses_jump_to_uncached __attribute__ ((__section__ (".uncached.text"))) - -/* - * Jump to uncached area. - * When handling TLB or caches, we need to do it from an uncached area. - */ -#define jump_to_uncached() \ -do { \ - unsigned long __dummy; \ - \ - __asm__ __volatile__( \ - "mova 1f, %0\n\t" \ - "add %1, %0\n\t" \ - "jmp @%0\n\t" \ - " nop\n\t" \ - ".balign 4\n" \ - "1:" \ - : "=&z" (__dummy) \ - : "r" (cached_to_uncached)); \ -} while (0) - -/* - * Back to cached area. - */ -#define back_to_cached() \ -do { \ - unsigned long __dummy; \ - ctrl_barrier(); \ - __asm__ __volatile__( \ - "mov.l 1f, %0\n\t" \ - "jmp @%0\n\t" \ - " nop\n\t" \ - ".balign 4\n" \ - "1: .long 2f\n" \ - "2:" \ - : "=&r" (__dummy)); \ -} while (0) - -int handle_unaligned_access(opcode_t instruction, struct pt_regs *regs, - struct mem_access *ma); - -#endif /* __ASM_SH_SYSTEM_32_H */ diff --git a/include/asm-sh/system_64.h b/include/asm-sh/system_64.h deleted file mode 100644 index 943acf5ea07..00000000000 --- a/include/asm-sh/system_64.h +++ /dev/null @@ -1,40 +0,0 @@ -#ifndef __ASM_SH_SYSTEM_64_H -#define __ASM_SH_SYSTEM_64_H - -/* - * include/asm-sh/system_64.h - * - * Copyright (C) 2000, 2001 Paolo Alberelli - * Copyright (C) 2003 Paul Mundt - * Copyright (C) 2004 Richard Curnow - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ -#include - -/* - * switch_to() should switch tasks to task nr n, first - */ -struct task_struct *sh64_switch_to(struct task_struct *prev, - struct thread_struct *prev_thread, - struct task_struct *next, - struct thread_struct *next_thread); - -#define switch_to(prev,next,last) \ -do { \ - if (last_task_used_math != next) { \ - struct pt_regs *regs = next->thread.uregs; \ - if (regs) regs->sr |= SR_FD; \ - } \ - last = sh64_switch_to(prev, &prev->thread, next, \ - &next->thread); \ -} while (0) - -#define __uses_jump_to_uncached - -#define jump_to_uncached() do { } while (0) -#define back_to_cached() do { } while (0) - -#endif /* __ASM_SH_SYSTEM_64_H */ diff --git a/include/asm-sh/systemh7751.h b/include/asm-sh/systemh7751.h deleted file mode 100644 index 4161122c84e..00000000000 --- a/include/asm-sh/systemh7751.h +++ /dev/null @@ -1,71 +0,0 @@ -#ifndef __ASM_SH_SYSTEMH_7751SYSTEMH_H -#define __ASM_SH_SYSTEMH_7751SYSTEMH_H - -/* - * linux/include/asm-sh/systemh/7751systemh.h - * - * Copyright (C) 2000 Kazumoto Kojima - * - * Hitachi SystemH support - - * Modified for 7751 SystemH by - * Jonathan Short, 2002. - */ - -/* Box specific addresses. */ - -#define PA_ROM 0x00000000 /* EPROM */ -#define PA_ROM_SIZE 0x00400000 /* EPROM size 4M byte */ -#define PA_FROM 0x01000000 /* EPROM */ -#define PA_FROM_SIZE 0x00400000 /* EPROM size 4M byte */ -#define PA_EXT1 0x04000000 -#define PA_EXT1_SIZE 0x04000000 -#define PA_EXT2 0x08000000 -#define PA_EXT2_SIZE 0x04000000 -#define PA_SDRAM 0x0c000000 -#define PA_SDRAM_SIZE 0x04000000 - -#define PA_EXT4 0x12000000 -#define PA_EXT4_SIZE 0x02000000 -#define PA_EXT5 0x14000000 -#define PA_EXT5_SIZE 0x04000000 -#define PA_PCIC 0x18000000 /* MR-SHPC-01 PCMCIA */ - -#define PA_DIPSW0 0xb9000000 /* Dip switch 5,6 */ -#define PA_DIPSW1 0xb9000002 /* Dip switch 7,8 */ -#define PA_LED 0xba000000 /* LED */ -#define PA_BCR 0xbb000000 /* FPGA on the MS7751SE01 */ - -#define PA_MRSHPC 0xb83fffe0 /* MR-SHPC-01 PCMCIA controller */ -#define PA_MRSHPC_MW1 0xb8400000 /* MR-SHPC-01 memory window base */ -#define PA_MRSHPC_MW2 0xb8500000 /* MR-SHPC-01 attribute window base */ -#define PA_MRSHPC_IO 0xb8600000 /* MR-SHPC-01 I/O window base */ -#define MRSHPC_MODE (PA_MRSHPC + 4) -#define MRSHPC_OPTION (PA_MRSHPC + 6) -#define MRSHPC_CSR (PA_MRSHPC + 8) -#define MRSHPC_ISR (PA_MRSHPC + 10) -#define MRSHPC_ICR (PA_MRSHPC + 12) -#define MRSHPC_CPWCR (PA_MRSHPC + 14) -#define MRSHPC_MW0CR1 (PA_MRSHPC + 16) -#define MRSHPC_MW1CR1 (PA_MRSHPC + 18) -#define MRSHPC_IOWCR1 (PA_MRSHPC + 20) -#define MRSHPC_MW0CR2 (PA_MRSHPC + 22) -#define MRSHPC_MW1CR2 (PA_MRSHPC + 24) -#define MRSHPC_IOWCR2 (PA_MRSHPC + 26) -#define MRSHPC_CDCR (PA_MRSHPC + 28) -#define MRSHPC_PCIC_INFO (PA_MRSHPC + 30) - -#define BCR_ILCRA (PA_BCR + 0) -#define BCR_ILCRB (PA_BCR + 2) -#define BCR_ILCRC (PA_BCR + 4) -#define BCR_ILCRD (PA_BCR + 6) -#define BCR_ILCRE (PA_BCR + 8) -#define BCR_ILCRF (PA_BCR + 10) -#define BCR_ILCRG (PA_BCR + 12) - -#define IRQ_79C973 13 - -#define __IO_PREFIX sh7751systemh -#include - -#endif /* __ASM_SH_SYSTEMH_7751SYSTEMH_H */ diff --git a/include/asm-sh/termbits.h b/include/asm-sh/termbits.h deleted file mode 100644 index 77db116948c..00000000000 --- a/include/asm-sh/termbits.h +++ /dev/null @@ -1,198 +0,0 @@ -#ifndef __ASM_SH_TERMBITS_H -#define __ASM_SH_TERMBITS_H - -#include - -typedef unsigned char cc_t; -typedef unsigned int speed_t; -typedef unsigned int tcflag_t; - -#define NCCS 19 -struct termios { - tcflag_t c_iflag; /* input mode flags */ - tcflag_t c_oflag; /* output mode flags */ - tcflag_t c_cflag; /* control mode flags */ - tcflag_t c_lflag; /* local mode flags */ - cc_t c_line; /* line discipline */ - cc_t c_cc[NCCS]; /* control characters */ -}; - -struct termios2 { - tcflag_t c_iflag; /* input mode flags */ - tcflag_t c_oflag; /* output mode flags */ - tcflag_t c_cflag; /* control mode flags */ - tcflag_t c_lflag; /* local mode flags */ - cc_t c_line; /* line discipline */ - cc_t c_cc[NCCS]; /* control characters */ - speed_t c_ispeed; /* input speed */ - speed_t c_ospeed; /* output speed */ -}; - -struct ktermios { - tcflag_t c_iflag; /* input mode flags */ - tcflag_t c_oflag; /* output mode flags */ - tcflag_t c_cflag; /* control mode flags */ - tcflag_t c_lflag; /* local mode flags */ - cc_t c_line; /* line discipline */ - cc_t c_cc[NCCS]; /* control characters */ - speed_t c_ispeed; /* input speed */ - speed_t c_ospeed; /* output speed */ -}; - -/* c_cc characters */ -#define VINTR 0 -#define VQUIT 1 -#define VERASE 2 -#define VKILL 3 -#define VEOF 4 -#define VTIME 5 -#define VMIN 6 -#define VSWTC 7 -#define VSTART 8 -#define VSTOP 9 -#define VSUSP 10 -#define VEOL 11 -#define VREPRINT 12 -#define VDISCARD 13 -#define VWERASE 14 -#define VLNEXT 15 -#define VEOL2 16 - -/* c_iflag bits */ -#define IGNBRK 0000001 -#define BRKINT 0000002 -#define IGNPAR 0000004 -#define PARMRK 0000010 -#define INPCK 0000020 -#define ISTRIP 0000040 -#define INLCR 0000100 -#define IGNCR 0000200 -#define ICRNL 0000400 -#define IUCLC 0001000 -#define IXON 0002000 -#define IXANY 0004000 -#define IXOFF 0010000 -#define IMAXBEL 0020000 -#define IUTF8 0040000 - -/* c_oflag bits */ -#define OPOST 0000001 -#define OLCUC 0000002 -#define ONLCR 0000004 -#define OCRNL 0000010 -#define ONOCR 0000020 -#define ONLRET 0000040 -#define OFILL 0000100 -#define OFDEL 0000200 -#define NLDLY 0000400 -#define NL0 0000000 -#define NL1 0000400 -#define CRDLY 0003000 -#define CR0 0000000 -#define CR1 0001000 -#define CR2 0002000 -#define CR3 0003000 -#define TABDLY 0014000 -#define TAB0 0000000 -#define TAB1 0004000 -#define TAB2 0010000 -#define TAB3 0014000 -#define XTABS 0014000 -#define BSDLY 0020000 -#define BS0 0000000 -#define BS1 0020000 -#define VTDLY 0040000 -#define VT0 0000000 -#define VT1 0040000 -#define FFDLY 0100000 -#define FF0 0000000 -#define FF1 0100000 - -/* c_cflag bit meaning */ -#define CBAUD 0010017 -#define B0 0000000 /* hang up */ -#define B50 0000001 -#define B75 0000002 -#define B110 0000003 -#define B134 0000004 -#define B150 0000005 -#define B200 0000006 -#define B300 0000007 -#define B600 0000010 -#define B1200 0000011 -#define B1800 0000012 -#define B2400 0000013 -#define B4800 0000014 -#define B9600 0000015 -#define B19200 0000016 -#define B38400 0000017 -#define EXTA B19200 -#define EXTB B38400 -#define CSIZE 0000060 -#define CS5 0000000 -#define CS6 0000020 -#define CS7 0000040 -#define CS8 0000060 -#define CSTOPB 0000100 -#define CREAD 0000200 -#define PARENB 0000400 -#define PARODD 0001000 -#define HUPCL 0002000 -#define CLOCAL 0004000 -#define CBAUDEX 0010000 -#define BOTHER 0010000 -#define B57600 0010001 -#define B115200 0010002 -#define B230400 0010003 -#define B460800 0010004 -#define B500000 0010005 -#define B576000 0010006 -#define B921600 0010007 -#define B1000000 0010010 -#define B1152000 0010011 -#define B1500000 0010012 -#define B2000000 0010013 -#define B2500000 0010014 -#define B3000000 0010015 -#define B3500000 0010016 -#define B4000000 0010017 -#define CIBAUD 002003600000 /* input baud rate */ -#define CMSPAR 010000000000 /* mark or space (stick) parity */ -#define CRTSCTS 020000000000 /* flow control */ - -#define IBSHIFT 16 /* Shift from CBAUD to CIBAUD */ - -/* c_lflag bits */ -#define ISIG 0000001 -#define ICANON 0000002 -#define XCASE 0000004 -#define ECHO 0000010 -#define ECHOE 0000020 -#define ECHOK 0000040 -#define ECHONL 0000100 -#define NOFLSH 0000200 -#define TOSTOP 0000400 -#define ECHOCTL 0001000 -#define ECHOPRT 0002000 -#define ECHOKE 0004000 -#define FLUSHO 0010000 -#define PENDIN 0040000 -#define IEXTEN 0100000 - -/* tcflow() and TCXONC use these */ -#define TCOOFF 0 -#define TCOON 1 -#define TCIOFF 2 -#define TCION 3 - -/* tcflush() and TCFLSH use these */ -#define TCIFLUSH 0 -#define TCOFLUSH 1 -#define TCIOFLUSH 2 - -/* tcsetattr uses these */ -#define TCSANOW 0 -#define TCSADRAIN 1 -#define TCSAFLUSH 2 - -#endif /* __ASM_SH_TERMBITS_H */ diff --git a/include/asm-sh/termios.h b/include/asm-sh/termios.h deleted file mode 100644 index 0a8c793c76f..00000000000 --- a/include/asm-sh/termios.h +++ /dev/null @@ -1,90 +0,0 @@ -#ifndef __ASM_SH_TERMIOS_H -#define __ASM_SH_TERMIOS_H - -#include -#include - -struct winsize { - unsigned short ws_row; - unsigned short ws_col; - unsigned short ws_xpixel; - unsigned short ws_ypixel; -}; - -#define NCC 8 -struct termio { - unsigned short c_iflag; /* input mode flags */ - unsigned short c_oflag; /* output mode flags */ - unsigned short c_cflag; /* control mode flags */ - unsigned short c_lflag; /* local mode flags */ - unsigned char c_line; /* line discipline */ - unsigned char c_cc[NCC]; /* control characters */ -}; - -/* modem lines */ -#define TIOCM_LE 0x001 -#define TIOCM_DTR 0x002 -#define TIOCM_RTS 0x004 -#define TIOCM_ST 0x008 -#define TIOCM_SR 0x010 -#define TIOCM_CTS 0x020 -#define TIOCM_CAR 0x040 -#define TIOCM_RNG 0x080 -#define TIOCM_DSR 0x100 -#define TIOCM_CD TIOCM_CAR -#define TIOCM_RI TIOCM_RNG -#define TIOCM_OUT1 0x2000 -#define TIOCM_OUT2 0x4000 -#define TIOCM_LOOP 0x8000 - -/* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */ - -#ifdef __KERNEL__ - -/* intr=^C quit=^\ erase=del kill=^U - eof=^D vtime=\0 vmin=\1 sxtc=\0 - start=^Q stop=^S susp=^Z eol=\0 - reprint=^R discard=^U werase=^W lnext=^V - eol2=\0 -*/ -#define INIT_C_CC "\003\034\177\025\004\0\1\0\021\023\032\0\022\017\027\026\0" - -/* - * Translate a "termio" structure into a "termios". Ugh. - */ -#define SET_LOW_TERMIOS_BITS(termios, termio, x) { \ - unsigned short __tmp; \ - get_user(__tmp,&(termio)->x); \ - *(unsigned short *) &(termios)->x = __tmp; \ -} - -#define user_termio_to_kernel_termios(termios, termio) \ -({ \ - SET_LOW_TERMIOS_BITS(termios, termio, c_iflag); \ - SET_LOW_TERMIOS_BITS(termios, termio, c_oflag); \ - SET_LOW_TERMIOS_BITS(termios, termio, c_cflag); \ - SET_LOW_TERMIOS_BITS(termios, termio, c_lflag); \ - copy_from_user((termios)->c_cc, (termio)->c_cc, NCC); \ -}) - -/* - * Translate a "termios" structure into a "termio". Ugh. - */ -#define kernel_termios_to_user_termio(termio, termios) \ -({ \ - put_user((termios)->c_iflag, &(termio)->c_iflag); \ - put_user((termios)->c_oflag, &(termio)->c_oflag); \ - put_user((termios)->c_cflag, &(termio)->c_cflag); \ - put_user((termios)->c_lflag, &(termio)->c_lflag); \ - put_user((termios)->c_line, &(termio)->c_line); \ - copy_to_user((termio)->c_cc, (termios)->c_cc, NCC); \ -}) - -#define user_termios_to_kernel_termios(k, u) copy_from_user(k, u, sizeof(struct termios2)) -#define kernel_termios_to_user_termios(u, k) copy_to_user(u, k, sizeof(struct termios2)) -#define user_termios_to_kernel_termios_1(k, u) copy_from_user(k, u, sizeof(struct termios)) -#define kernel_termios_to_user_termios_1(u, k) copy_to_user(u, k, sizeof(struct termios)) - -#endif /* __KERNEL__ */ - -#endif /* __ASM_SH_TERMIOS_H */ diff --git a/include/asm-sh/thread_info.h b/include/asm-sh/thread_info.h deleted file mode 100644 index eeb4c747119..00000000000 --- a/include/asm-sh/thread_info.h +++ /dev/null @@ -1,141 +0,0 @@ -#ifndef __ASM_SH_THREAD_INFO_H -#define __ASM_SH_THREAD_INFO_H - -/* SuperH version - * Copyright (C) 2002 Niibe Yutaka - * - * The copyright of original i386 version is: - * - * Copyright (C) 2002 David Howells (dhowells@redhat.com) - * - Incorporating suggestions made by Linus Torvalds and Dave Miller - */ -#ifdef __KERNEL__ -#include - -#ifndef __ASSEMBLY__ -#include - -struct thread_info { - struct task_struct *task; /* main task structure */ - struct exec_domain *exec_domain; /* execution domain */ - unsigned long flags; /* low level flags */ - __u32 cpu; - int preempt_count; /* 0 => preemptable, <0 => BUG */ - mm_segment_t addr_limit; /* thread address space */ - struct restart_block restart_block; - unsigned long previous_sp; /* sp of previous stack in case - of nested IRQ stacks */ - __u8 supervisor_stack[0]; -}; - -#endif - -#define PREEMPT_ACTIVE 0x10000000 - -#if defined(CONFIG_4KSTACKS) -#define THREAD_SIZE_ORDER (0) -#elif defined(CONFIG_PAGE_SIZE_4KB) -#define THREAD_SIZE_ORDER (1) -#elif defined(CONFIG_PAGE_SIZE_8KB) -#define THREAD_SIZE_ORDER (1) -#elif defined(CONFIG_PAGE_SIZE_16KB) -#define THREAD_SIZE_ORDER (0) -#elif defined(CONFIG_PAGE_SIZE_64KB) -#define THREAD_SIZE_ORDER (0) -#else -#error "Unknown thread size" -#endif - -#define THREAD_SIZE (PAGE_SIZE << THREAD_SIZE_ORDER) -#define STACK_WARN (THREAD_SIZE >> 3) - -/* - * macros/functions for gaining access to the thread information structure - */ -#ifndef __ASSEMBLY__ -#define INIT_THREAD_INFO(tsk) \ -{ \ - .task = &tsk, \ - .exec_domain = &default_exec_domain, \ - .flags = 0, \ - .cpu = 0, \ - .preempt_count = 1, \ - .addr_limit = KERNEL_DS, \ - .restart_block = { \ - .fn = do_no_restart_syscall, \ - }, \ -} - -#define init_thread_info (init_thread_union.thread_info) -#define init_stack (init_thread_union.stack) - -/* how to get the current stack pointer from C */ -register unsigned long current_stack_pointer asm("r15") __used; - -/* how to get the thread information struct from C */ -static inline struct thread_info *current_thread_info(void) -{ - struct thread_info *ti; -#if defined(CONFIG_SUPERH64) - __asm__ __volatile__ ("getcon cr17, %0" : "=r" (ti)); -#elif defined(CONFIG_CPU_HAS_SR_RB) - __asm__ __volatile__ ("stc r7_bank, %0" : "=r" (ti)); -#else - unsigned long __dummy; - - __asm__ __volatile__ ( - "mov r15, %0\n\t" - "and %1, %0\n\t" - : "=&r" (ti), "=r" (__dummy) - : "1" (~(THREAD_SIZE - 1)) - : "memory"); -#endif - - return ti; -} - -#define __HAVE_ARCH_THREAD_INFO_ALLOCATOR - -/* thread information allocation */ -#ifdef CONFIG_DEBUG_STACK_USAGE -#define alloc_thread_info(ti) kzalloc(THREAD_SIZE, GFP_KERNEL) -#else -#define alloc_thread_info(ti) kmalloc(THREAD_SIZE, GFP_KERNEL) -#endif -#define free_thread_info(ti) kfree(ti) - -#endif /* __ASSEMBLY__ */ - -/* - * thread information flags - * - these are process state flags that various assembly files may need to access - * - pending work-to-be-done flags are in LSW - * - other flags in MSW - */ -#define TIF_SYSCALL_TRACE 0 /* syscall trace active */ -#define TIF_SIGPENDING 1 /* signal pending */ -#define TIF_NEED_RESCHED 2 /* rescheduling necessary */ -#define TIF_RESTORE_SIGMASK 3 /* restore signal mask in do_signal() */ -#define TIF_SINGLESTEP 4 /* singlestepping active */ -#define TIF_SYSCALL_AUDIT 5 -#define TIF_USEDFPU 16 /* FPU was used by this task this quantum (SMP) */ -#define TIF_POLLING_NRFLAG 17 /* true if poll_idle() is polling TIF_NEED_RESCHED */ -#define TIF_MEMDIE 18 -#define TIF_FREEZE 19 - -#define _TIF_SYSCALL_TRACE (1< -#include -#include - -struct sys_timer_ops { - int (*init)(void); - int (*start)(void); - int (*stop)(void); - cycle_t (*read)(void); -#ifndef CONFIG_GENERIC_TIME - unsigned long (*get_offset)(void); -#endif -}; - -struct sys_timer { - const char *name; - - struct sys_device dev; - struct sys_timer_ops *ops; -}; - -#define TICK_SIZE (tick_nsec / 1000) - -extern struct sys_timer tmu_timer, cmt_timer, mtu2_timer; -extern struct sys_timer *sys_timer; - -#ifndef CONFIG_GENERIC_TIME -static inline unsigned long get_timer_offset(void) -{ - return sys_timer->ops->get_offset(); -} -#endif - -/* arch/sh/kernel/timers/timer.c */ -struct sys_timer *get_sys_timer(void); - -/* arch/sh/kernel/time.c */ -void handle_timer_tick(void); -extern unsigned long sh_hpt_frequency; - -#endif /* __ASM_SH_TIMER_H */ diff --git a/include/asm-sh/timex.h b/include/asm-sh/timex.h deleted file mode 100644 index a873e24113c..00000000000 --- a/include/asm-sh/timex.h +++ /dev/null @@ -1,18 +0,0 @@ -/* - * linux/include/asm-sh/timex.h - * - * sh architecture timex specifications - */ -#ifndef __ASM_SH_TIMEX_H -#define __ASM_SH_TIMEX_H - -#define CLOCK_TICK_RATE (CONFIG_SH_PCLK_FREQ / 4) /* Underlying HZ */ - -typedef unsigned long long cycles_t; - -static __inline__ cycles_t get_cycles (void) -{ - return 0; -} - -#endif /* __ASM_SH_TIMEX_H */ diff --git a/include/asm-sh/titan.h b/include/asm-sh/titan.h deleted file mode 100644 index 03f3583c891..00000000000 --- a/include/asm-sh/titan.h +++ /dev/null @@ -1,17 +0,0 @@ -/* - * Platform defintions for Titan - */ -#ifndef _ASM_SH_TITAN_H -#define _ASM_SH_TITAN_H - -#define __IO_PREFIX titan -#include - -/* IRQ assignments */ -#define TITAN_IRQ_WAN 2 /* eth0 (WAN) */ -#define TITAN_IRQ_LAN 5 /* eth1 (LAN) */ -#define TITAN_IRQ_MPCIA 8 /* mPCI A */ -#define TITAN_IRQ_MPCIB 11 /* mPCI B */ -#define TITAN_IRQ_USB 11 /* USB */ - -#endif /* __ASM_SH_TITAN_H */ diff --git a/include/asm-sh/tlb.h b/include/asm-sh/tlb.h deleted file mode 100644 index 88ff1ae8a6b..00000000000 --- a/include/asm-sh/tlb.h +++ /dev/null @@ -1,27 +0,0 @@ -#ifndef __ASM_SH_TLB_H -#define __ASM_SH_TLB_H - -#ifdef CONFIG_SUPERH64 -# include "tlb_64.h" -#endif - -#ifndef __ASSEMBLY__ - -#define tlb_start_vma(tlb, vma) \ - flush_cache_range(vma, vma->vm_start, vma->vm_end) - -#define tlb_end_vma(tlb, vma) \ - flush_tlb_range(vma, vma->vm_start, vma->vm_end) - -#define __tlb_remove_tlb_entry(tlb, pte, address) do { } while (0) - -/* - * Flush whole TLBs for MM - */ -#define tlb_flush(tlb) flush_tlb_mm((tlb)->mm) - -#include -#include - -#endif /* __ASSEMBLY__ */ -#endif /* __ASM_SH_TLB_H */ diff --git a/include/asm-sh/tlb_64.h b/include/asm-sh/tlb_64.h deleted file mode 100644 index 0a96f3af69e..00000000000 --- a/include/asm-sh/tlb_64.h +++ /dev/null @@ -1,77 +0,0 @@ -/* - * include/asm-sh/tlb_64.h - * - * Copyright (C) 2003 Paul Mundt - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ -#ifndef __ASM_SH_TLB_64_H -#define __ASM_SH_TLB_64_H - -/* ITLB defines */ -#define ITLB_FIXED 0x00000000 /* First fixed ITLB, see head.S */ -#define ITLB_LAST_VAR_UNRESTRICTED 0x000003F0 /* Last ITLB */ - -/* DTLB defines */ -#define DTLB_FIXED 0x00800000 /* First fixed DTLB, see head.S */ -#define DTLB_LAST_VAR_UNRESTRICTED 0x008003F0 /* Last DTLB */ - -#ifndef __ASSEMBLY__ - -/** - * for_each_dtlb_entry - * - * @tlb: TLB entry - * - * Iterate over free (non-wired) DTLB entries - */ -#define for_each_dtlb_entry(tlb) \ - for (tlb = cpu_data->dtlb.first; \ - tlb <= cpu_data->dtlb.last; \ - tlb += cpu_data->dtlb.step) - -/** - * for_each_itlb_entry - * - * @tlb: TLB entry - * - * Iterate over free (non-wired) ITLB entries - */ -#define for_each_itlb_entry(tlb) \ - for (tlb = cpu_data->itlb.first; \ - tlb <= cpu_data->itlb.last; \ - tlb += cpu_data->itlb.step) - -/** - * __flush_tlb_slot - * - * @slot: Address of TLB slot. - * - * Flushes TLB slot @slot. - */ -static inline void __flush_tlb_slot(unsigned long long slot) -{ - __asm__ __volatile__ ("putcfg %0, 0, r63\n" : : "r" (slot)); -} - -#ifdef CONFIG_MMU -/* arch/sh64/mm/tlb.c */ -int sh64_tlb_init(void); -unsigned long long sh64_next_free_dtlb_entry(void); -unsigned long long sh64_get_wired_dtlb_entry(void); -int sh64_put_wired_dtlb_entry(unsigned long long entry); -void sh64_setup_tlb_slot(unsigned long long config_addr, unsigned long eaddr, - unsigned long asid, unsigned long paddr); -void sh64_teardown_tlb_slot(unsigned long long config_addr); -#else -#define sh64_tlb_init() do { } while (0) -#define sh64_next_free_dtlb_entry() (0) -#define sh64_get_wired_dtlb_entry() (0) -#define sh64_put_wired_dtlb_entry(entry) do { } while (0) -#define sh64_setup_tlb_slot(conf, virt, asid, phys) do { } while (0) -#define sh64_teardown_tlb_slot(addr) do { } while (0) -#endif /* CONFIG_MMU */ -#endif /* __ASSEMBLY__ */ -#endif /* __ASM_SH_TLB_64_H */ diff --git a/include/asm-sh/tlbflush.h b/include/asm-sh/tlbflush.h deleted file mode 100644 index e0ac97221ae..00000000000 --- a/include/asm-sh/tlbflush.h +++ /dev/null @@ -1,49 +0,0 @@ -#ifndef __ASM_SH_TLBFLUSH_H -#define __ASM_SH_TLBFLUSH_H - -/* - * TLB flushing: - * - * - flush_tlb_all() flushes all processes TLBs - * - flush_tlb_mm(mm) flushes the specified mm context TLB's - * - flush_tlb_page(vma, vmaddr) flushes one page - * - flush_tlb_range(vma, start, end) flushes a range of pages - * - flush_tlb_kernel_range(start, end) flushes a range of kernel pages - */ -extern void local_flush_tlb_all(void); -extern void local_flush_tlb_mm(struct mm_struct *mm); -extern void local_flush_tlb_range(struct vm_area_struct *vma, - unsigned long start, - unsigned long end); -extern void local_flush_tlb_page(struct vm_area_struct *vma, - unsigned long page); -extern void local_flush_tlb_kernel_range(unsigned long start, - unsigned long end); -extern void local_flush_tlb_one(unsigned long asid, unsigned long page); - -#ifdef CONFIG_SMP - -extern void flush_tlb_all(void); -extern void flush_tlb_mm(struct mm_struct *mm); -extern void flush_tlb_range(struct vm_area_struct *vma, unsigned long start, - unsigned long end); -extern void flush_tlb_page(struct vm_area_struct *vma, unsigned long page); -extern void flush_tlb_kernel_range(unsigned long start, unsigned long end); -extern void flush_tlb_one(unsigned long asid, unsigned long page); - -#else - -#define flush_tlb_all() local_flush_tlb_all() -#define flush_tlb_mm(mm) local_flush_tlb_mm(mm) -#define flush_tlb_page(vma, page) local_flush_tlb_page(vma, page) -#define flush_tlb_one(asid, page) local_flush_tlb_one(asid, page) - -#define flush_tlb_range(vma, start, end) \ - local_flush_tlb_range(vma, start, end) - -#define flush_tlb_kernel_range(start, end) \ - local_flush_tlb_kernel_range(start, end) - -#endif /* CONFIG_SMP */ - -#endif /* __ASM_SH_TLBFLUSH_H */ diff --git a/include/asm-sh/topology.h b/include/asm-sh/topology.h deleted file mode 100644 index 95f0085e098..00000000000 --- a/include/asm-sh/topology.h +++ /dev/null @@ -1,47 +0,0 @@ -#ifndef _ASM_SH_TOPOLOGY_H -#define _ASM_SH_TOPOLOGY_H - -#ifdef CONFIG_NUMA - -/* sched_domains SD_NODE_INIT for sh machines */ -#define SD_NODE_INIT (struct sched_domain) { \ - .span = CPU_MASK_NONE, \ - .parent = NULL, \ - .child = NULL, \ - .groups = NULL, \ - .min_interval = 8, \ - .max_interval = 32, \ - .busy_factor = 32, \ - .imbalance_pct = 125, \ - .cache_nice_tries = 2, \ - .busy_idx = 3, \ - .idle_idx = 2, \ - .newidle_idx = 2, \ - .wake_idx = 1, \ - .forkexec_idx = 1, \ - .flags = SD_LOAD_BALANCE \ - | SD_BALANCE_FORK \ - | SD_BALANCE_EXEC \ - | SD_SERIALIZE \ - | SD_WAKE_BALANCE, \ - .last_balance = jiffies, \ - .balance_interval = 1, \ - .nr_balance_failed = 0, \ -} - -#define cpu_to_node(cpu) ((void)(cpu),0) -#define parent_node(node) ((void)(node),0) - -#define node_to_cpumask(node) ((void)node, cpu_online_map) -#define node_to_first_cpu(node) ((void)(node),0) - -#define pcibus_to_node(bus) ((void)(bus), -1) -#define pcibus_to_cpumask(bus) (pcibus_to_node(bus) == -1 ? \ - CPU_MASK_ALL : \ - node_to_cpumask(pcibus_to_node(bus)) \ - ) -#endif - -#include - -#endif /* _ASM_SH_TOPOLOGY_H */ diff --git a/include/asm-sh/types.h b/include/asm-sh/types.h deleted file mode 100644 index beea4e6f8df..00000000000 --- a/include/asm-sh/types.h +++ /dev/null @@ -1,35 +0,0 @@ -#ifndef __ASM_SH_TYPES_H -#define __ASM_SH_TYPES_H - -#include - -#ifndef __ASSEMBLY__ - -typedef unsigned short umode_t; - -#endif /* __ASSEMBLY__ */ - -/* - * These aren't exported outside the kernel to avoid name space clashes - */ -#ifdef __KERNEL__ - -#define BITS_PER_LONG 32 - -#ifndef __ASSEMBLY__ - -/* Dma addresses are 32-bits wide. */ - -typedef u32 dma_addr_t; - -#ifdef CONFIG_SUPERH32 -typedef u16 opcode_t; -#else -typedef u32 opcode_t; -#endif - -#endif /* __ASSEMBLY__ */ - -#endif /* __KERNEL__ */ - -#endif /* __ASM_SH_TYPES_H */ diff --git a/include/asm-sh/uaccess.h b/include/asm-sh/uaccess.h deleted file mode 100644 index 45c2c9b2993..00000000000 --- a/include/asm-sh/uaccess.h +++ /dev/null @@ -1,256 +0,0 @@ -#ifndef __ASM_SH_UACCESS_H -#define __ASM_SH_UACCESS_H - -#include -#include -#include - -#define VERIFY_READ 0 -#define VERIFY_WRITE 1 - -#define __addr_ok(addr) \ - ((unsigned long __force)(addr) < current_thread_info()->addr_limit.seg) - -/* - * __access_ok: Check if address with size is OK or not. - * - * Uhhuh, this needs 33-bit arithmetic. We have a carry.. - * - * sum := addr + size; carry? --> flag = true; - * if (sum >= addr_limit) flag = true; - */ -#define __access_ok(addr, size) \ - (__addr_ok((addr) + (size))) -#define access_ok(type, addr, size) \ - (__chk_user_ptr(addr), \ - __access_ok((unsigned long __force)(addr), (size))) - -/* - * Uh, these should become the main single-value transfer routines ... - * They automatically use the right size if we just have the right - * pointer type ... - * - * As SuperH uses the same address space for kernel and user data, we - * can just do these as direct assignments. - * - * Careful to not - * (a) re-use the arguments for side effects (sizeof is ok) - * (b) require any knowledge of processes at this stage - */ -#define put_user(x,ptr) __put_user_check((x), (ptr), sizeof(*(ptr))) -#define get_user(x,ptr) __get_user_check((x), (ptr), sizeof(*(ptr))) - -/* - * The "__xxx" versions do not do address space checking, useful when - * doing multiple accesses to the same area (the user has to do the - * checks by hand with "access_ok()") - */ -#define __put_user(x,ptr) __put_user_nocheck((x), (ptr), sizeof(*(ptr))) -#define __get_user(x,ptr) __get_user_nocheck((x), (ptr), sizeof(*(ptr))) - -struct __large_struct { unsigned long buf[100]; }; -#define __m(x) (*(struct __large_struct __user *)(x)) - -#define __get_user_nocheck(x,ptr,size) \ -({ \ - long __gu_err; \ - unsigned long __gu_val; \ - const __typeof__(*(ptr)) __user *__gu_addr = (ptr); \ - __chk_user_ptr(ptr); \ - __get_user_size(__gu_val, __gu_addr, (size), __gu_err); \ - (x) = (__typeof__(*(ptr)))__gu_val; \ - __gu_err; \ -}) - -#define __get_user_check(x,ptr,size) \ -({ \ - long __gu_err = -EFAULT; \ - unsigned long __gu_val = 0; \ - const __typeof__(*(ptr)) *__gu_addr = (ptr); \ - if (likely(access_ok(VERIFY_READ, __gu_addr, (size)))) \ - __get_user_size(__gu_val, __gu_addr, (size), __gu_err); \ - (x) = (__typeof__(*(ptr)))__gu_val; \ - __gu_err; \ -}) - -#define __put_user_nocheck(x,ptr,size) \ -({ \ - long __pu_err; \ - __typeof__(*(ptr)) __user *__pu_addr = (ptr); \ - __chk_user_ptr(ptr); \ - __put_user_size((x), __pu_addr, (size), __pu_err); \ - __pu_err; \ -}) - -#define __put_user_check(x,ptr,size) \ -({ \ - long __pu_err = -EFAULT; \ - __typeof__(*(ptr)) __user *__pu_addr = (ptr); \ - if (likely(access_ok(VERIFY_WRITE, __pu_addr, size))) \ - __put_user_size((x), __pu_addr, (size), \ - __pu_err); \ - __pu_err; \ -}) - -#ifdef CONFIG_SUPERH32 -# include "uaccess_32.h" -#else -# include "uaccess_64.h" -#endif - -/* Generic arbitrary sized copy. */ -/* Return the number of bytes NOT copied */ -__kernel_size_t __copy_user(void *to, const void *from, __kernel_size_t n); - -static __always_inline unsigned long -__copy_from_user(void *to, const void __user *from, unsigned long n) -{ - return __copy_user(to, (__force void *)from, n); -} - -static __always_inline unsigned long __must_check -__copy_to_user(void __user *to, const void *from, unsigned long n) -{ - return __copy_user((__force void *)to, from, n); -} - -#define __copy_to_user_inatomic __copy_to_user -#define __copy_from_user_inatomic __copy_from_user - -/* - * Clear the area and return remaining number of bytes - * (on failure. Usually it's 0.) - */ -__kernel_size_t __clear_user(void *addr, __kernel_size_t size); - -#define clear_user(addr,n) \ -({ \ - void __user * __cl_addr = (addr); \ - unsigned long __cl_size = (n); \ - \ - if (__cl_size && access_ok(VERIFY_WRITE, \ - ((unsigned long)(__cl_addr)), __cl_size)) \ - __cl_size = __clear_user(__cl_addr, __cl_size); \ - \ - __cl_size; \ -}) - -/** - * strncpy_from_user: - Copy a NUL terminated string from userspace. - * @dst: Destination address, in kernel space. This buffer must be at - * least @count bytes long. - * @src: Source address, in user space. - * @count: Maximum number of bytes to copy, including the trailing NUL. - * - * Copies a NUL-terminated string from userspace to kernel space. - * - * On success, returns the length of the string (not including the trailing - * NUL). - * - * If access to userspace fails, returns -EFAULT (some data may have been - * copied). - * - * If @count is smaller than the length of the string, copies @count bytes - * and returns @count. - */ -#define strncpy_from_user(dest,src,count) \ -({ \ - unsigned long __sfu_src = (unsigned long)(src); \ - int __sfu_count = (int)(count); \ - long __sfu_res = -EFAULT; \ - \ - if (__access_ok(__sfu_src, __sfu_count)) \ - __sfu_res = __strncpy_from_user((unsigned long)(dest), \ - __sfu_src, __sfu_count); \ - \ - __sfu_res; \ -}) - -static inline unsigned long -copy_from_user(void *to, const void __user *from, unsigned long n) -{ - unsigned long __copy_from = (unsigned long) from; - __kernel_size_t __copy_size = (__kernel_size_t) n; - - if (__copy_size && __access_ok(__copy_from, __copy_size)) - return __copy_user(to, from, __copy_size); - - return __copy_size; -} - -static inline unsigned long -copy_to_user(void __user *to, const void *from, unsigned long n) -{ - unsigned long __copy_to = (unsigned long) to; - __kernel_size_t __copy_size = (__kernel_size_t) n; - - if (__copy_size && __access_ok(__copy_to, __copy_size)) - return __copy_user(to, from, __copy_size); - - return __copy_size; -} - -/** - * strnlen_user: - Get the size of a string in user space. - * @s: The string to measure. - * @n: The maximum valid length - * - * Context: User context only. This function may sleep. - * - * Get the size of a NUL-terminated string in user space. - * - * Returns the size of the string INCLUDING the terminating NUL. - * On exception, returns 0. - * If the string is too long, returns a value greater than @n. - */ -static inline long strnlen_user(const char __user *s, long n) -{ - if (!__addr_ok(s)) - return 0; - else - return __strnlen_user(s, n); -} - -/** - * strlen_user: - Get the size of a string in user space. - * @str: The string to measure. - * - * Context: User context only. This function may sleep. - * - * Get the size of a NUL-terminated string in user space. - * - * Returns the size of the string INCLUDING the terminating NUL. - * On exception, returns 0. - * - * If there is a limit on the length of a valid string, you may wish to - * consider using strnlen_user() instead. - */ -#define strlen_user(str) strnlen_user(str, ~0UL >> 1) - -/* - * The exception table consists of pairs of addresses: the first is the - * address of an instruction that is allowed to fault, and the second is - * the address at which the program should continue. No registers are - * modified, so it is entirely up to the continuation code to figure out - * what to do. - * - * All the routines below use bits of fixup code that are out of line - * with the main instruction path. This means when everything is well, - * we don't even have to jump over them. Further, they do not intrude - * on our cache or tlb entries. - */ -struct exception_table_entry { - unsigned long insn, fixup; -}; - -#if defined(CONFIG_SUPERH64) && defined(CONFIG_MMU) -#define ARCH_HAS_SEARCH_EXTABLE -#endif - -int fixup_exception(struct pt_regs *regs); -/* Returns 0 if exception not found and fixup.unit otherwise. */ -unsigned long search_exception_table(unsigned long addr); -const struct exception_table_entry *search_exception_tables(unsigned long addr); - - -#endif /* __ASM_SH_UACCESS_H */ diff --git a/include/asm-sh/uaccess_32.h b/include/asm-sh/uaccess_32.h deleted file mode 100644 index 892fd6dea9d..00000000000 --- a/include/asm-sh/uaccess_32.h +++ /dev/null @@ -1,249 +0,0 @@ -/* - * User space memory access functions - * - * Copyright (C) 1999, 2002 Niibe Yutaka - * Copyright (C) 2003 - 2008 Paul Mundt - * - * Based on: - * MIPS implementation version 1.15 by - * Copyright (C) 1996, 1997, 1998 by Ralf Baechle - * and i386 version. - */ -#ifndef __ASM_SH_UACCESS_32_H -#define __ASM_SH_UACCESS_32_H - -#define __get_user_size(x,ptr,size,retval) \ -do { \ - retval = 0; \ - switch (size) { \ - case 1: \ - __get_user_asm(x, ptr, retval, "b"); \ - break; \ - case 2: \ - __get_user_asm(x, ptr, retval, "w"); \ - break; \ - case 4: \ - __get_user_asm(x, ptr, retval, "l"); \ - break; \ - default: \ - __get_user_unknown(); \ - break; \ - } \ -} while (0) - -#ifdef CONFIG_MMU -#define __get_user_asm(x, addr, err, insn) \ -({ \ -__asm__ __volatile__( \ - "1:\n\t" \ - "mov." insn " %2, %1\n\t" \ - "2:\n" \ - ".section .fixup,\"ax\"\n" \ - "3:\n\t" \ - "mov #0, %1\n\t" \ - "mov.l 4f, %0\n\t" \ - "jmp @%0\n\t" \ - " mov %3, %0\n\t" \ - ".balign 4\n" \ - "4: .long 2b\n\t" \ - ".previous\n" \ - ".section __ex_table,\"a\"\n\t" \ - ".long 1b, 3b\n\t" \ - ".previous" \ - :"=&r" (err), "=&r" (x) \ - :"m" (__m(addr)), "i" (-EFAULT), "0" (err)); }) -#else -#define __get_user_asm(x, addr, err, insn) \ -do { \ - __asm__ __volatile__ ( \ - "mov." insn " %1, %0\n\t" \ - : "=&r" (x) \ - : "m" (__m(addr)) \ - ); \ -} while (0) -#endif /* CONFIG_MMU */ - -extern void __get_user_unknown(void); - -#define __put_user_size(x,ptr,size,retval) \ -do { \ - retval = 0; \ - switch (size) { \ - case 1: \ - __put_user_asm(x, ptr, retval, "b"); \ - break; \ - case 2: \ - __put_user_asm(x, ptr, retval, "w"); \ - break; \ - case 4: \ - __put_user_asm((u32)x, ptr, \ - retval, "l"); \ - break; \ - case 8: \ - __put_user_u64(x, ptr, retval); \ - break; \ - default: \ - __put_user_unknown(); \ - } \ -} while (0) - -#ifdef CONFIG_MMU -#define __put_user_asm(x, addr, err, insn) \ -do { \ - __asm__ __volatile__ ( \ - "1:\n\t" \ - "mov." insn " %1, %2\n\t" \ - "2:\n" \ - ".section .fixup,\"ax\"\n" \ - "3:\n\t" \ - "mov.l 4f, %0\n\t" \ - "jmp @%0\n\t" \ - " mov %3, %0\n\t" \ - ".balign 4\n" \ - "4: .long 2b\n\t" \ - ".previous\n" \ - ".section __ex_table,\"a\"\n\t" \ - ".long 1b, 3b\n\t" \ - ".previous" \ - : "=&r" (err) \ - : "r" (x), "m" (__m(addr)), "i" (-EFAULT), \ - "0" (err) \ - : "memory" \ - ); \ -} while (0) -#else -#define __put_user_asm(x, addr, err, insn) \ -do { \ - __asm__ __volatile__ ( \ - "mov." insn " %0, %1\n\t" \ - : /* no outputs */ \ - : "r" (x), "m" (__m(addr)) \ - : "memory" \ - ); \ -} while (0) -#endif /* CONFIG_MMU */ - -#if defined(CONFIG_CPU_LITTLE_ENDIAN) -#define __put_user_u64(val,addr,retval) \ -({ \ -__asm__ __volatile__( \ - "1:\n\t" \ - "mov.l %R1,%2\n\t" \ - "mov.l %S1,%T2\n\t" \ - "2:\n" \ - ".section .fixup,\"ax\"\n" \ - "3:\n\t" \ - "mov.l 4f,%0\n\t" \ - "jmp @%0\n\t" \ - " mov %3,%0\n\t" \ - ".balign 4\n" \ - "4: .long 2b\n\t" \ - ".previous\n" \ - ".section __ex_table,\"a\"\n\t" \ - ".long 1b, 3b\n\t" \ - ".previous" \ - : "=r" (retval) \ - : "r" (val), "m" (__m(addr)), "i" (-EFAULT), "0" (retval) \ - : "memory"); }) -#else -#define __put_user_u64(val,addr,retval) \ -({ \ -__asm__ __volatile__( \ - "1:\n\t" \ - "mov.l %S1,%2\n\t" \ - "mov.l %R1,%T2\n\t" \ - "2:\n" \ - ".section .fixup,\"ax\"\n" \ - "3:\n\t" \ - "mov.l 4f,%0\n\t" \ - "jmp @%0\n\t" \ - " mov %3,%0\n\t" \ - ".balign 4\n" \ - "4: .long 2b\n\t" \ - ".previous\n" \ - ".section __ex_table,\"a\"\n\t" \ - ".long 1b, 3b\n\t" \ - ".previous" \ - : "=r" (retval) \ - : "r" (val), "m" (__m(addr)), "i" (-EFAULT), "0" (retval) \ - : "memory"); }) -#endif - -extern void __put_user_unknown(void); - -static inline int -__strncpy_from_user(unsigned long __dest, unsigned long __user __src, int __count) -{ - __kernel_size_t res; - unsigned long __dummy, _d, _s, _c; - - __asm__ __volatile__( - "9:\n" - "mov.b @%2+, %1\n\t" - "cmp/eq #0, %1\n\t" - "bt/s 2f\n" - "1:\n" - "mov.b %1, @%3\n\t" - "dt %4\n\t" - "bf/s 9b\n\t" - " add #1, %3\n\t" - "2:\n\t" - "sub %4, %0\n" - "3:\n" - ".section .fixup,\"ax\"\n" - "4:\n\t" - "mov.l 5f, %1\n\t" - "jmp @%1\n\t" - " mov %9, %0\n\t" - ".balign 4\n" - "5: .long 3b\n" - ".previous\n" - ".section __ex_table,\"a\"\n" - " .balign 4\n" - " .long 9b,4b\n" - ".previous" - : "=r" (res), "=&z" (__dummy), "=r" (_s), "=r" (_d), "=r"(_c) - : "0" (__count), "2" (__src), "3" (__dest), "4" (__count), - "i" (-EFAULT) - : "memory", "t"); - - return res; -} - -/* - * Return the size of a string (including the ending 0 even when we have - * exceeded the maximum string length). - */ -static inline long __strnlen_user(const char __user *__s, long __n) -{ - unsigned long res; - unsigned long __dummy; - - __asm__ __volatile__( - "1:\t" - "mov.b @(%0,%3), %1\n\t" - "cmp/eq %4, %0\n\t" - "bt/s 2f\n\t" - " add #1, %0\n\t" - "tst %1, %1\n\t" - "bf 1b\n\t" - "2:\n" - ".section .fixup,\"ax\"\n" - "3:\n\t" - "mov.l 4f, %1\n\t" - "jmp @%1\n\t" - " mov #0, %0\n" - ".balign 4\n" - "4: .long 2b\n" - ".previous\n" - ".section __ex_table,\"a\"\n" - " .balign 4\n" - " .long 1b,3b\n" - ".previous" - : "=z" (res), "=&r" (__dummy) - : "0" (0), "r" (__s), "r" (__n) - : "t"); - return res; -} - -#endif /* __ASM_SH_UACCESS_32_H */ diff --git a/include/asm-sh/uaccess_64.h b/include/asm-sh/uaccess_64.h deleted file mode 100644 index 81b3d515fcb..00000000000 --- a/include/asm-sh/uaccess_64.h +++ /dev/null @@ -1,79 +0,0 @@ -#ifndef __ASM_SH_UACCESS_64_H -#define __ASM_SH_UACCESS_64_H - -/* - * include/asm-sh/uaccess_64.h - * - * Copyright (C) 2000, 2001 Paolo Alberelli - * Copyright (C) 2003, 2004 Paul Mundt - * - * User space memory access functions - * - * Copyright (C) 1999 Niibe Yutaka - * - * Based on: - * MIPS implementation version 1.15 by - * Copyright (C) 1996, 1997, 1998 by Ralf Baechle - * and i386 version. - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ - -#define __get_user_size(x,ptr,size,retval) \ -do { \ - retval = 0; \ - switch (size) { \ - case 1: \ - retval = __get_user_asm_b(x, ptr); \ - break; \ - case 2: \ - retval = __get_user_asm_w(x, ptr); \ - break; \ - case 4: \ - retval = __get_user_asm_l(x, ptr); \ - break; \ - case 8: \ - retval = __get_user_asm_q(x, ptr); \ - break; \ - default: \ - __get_user_unknown(); \ - break; \ - } \ -} while (0) - -extern long __get_user_asm_b(void *, long); -extern long __get_user_asm_w(void *, long); -extern long __get_user_asm_l(void *, long); -extern long __get_user_asm_q(void *, long); -extern void __get_user_unknown(void); - -#define __put_user_size(x,ptr,size,retval) \ -do { \ - retval = 0; \ - switch (size) { \ - case 1: \ - retval = __put_user_asm_b(x, ptr); \ - break; \ - case 2: \ - retval = __put_user_asm_w(x, ptr); \ - break; \ - case 4: \ - retval = __put_user_asm_l(x, ptr); \ - break; \ - case 8: \ - retval = __put_user_asm_q(x, ptr); \ - break; \ - default: \ - __put_user_unknown(); \ - } \ -} while (0) - -extern long __put_user_asm_b(void *, long); -extern long __put_user_asm_w(void *, long); -extern long __put_user_asm_l(void *, long); -extern long __put_user_asm_q(void *, long); -extern void __put_user_unknown(void); - -#endif /* __ASM_SH_UACCESS_64_H */ diff --git a/include/asm-sh/ubc.h b/include/asm-sh/ubc.h deleted file mode 100644 index 56f4e30dc49..00000000000 --- a/include/asm-sh/ubc.h +++ /dev/null @@ -1,64 +0,0 @@ -/* - * include/asm-sh/ubc.h - * - * Copyright (C) 1999 Niibe Yutaka - * Copyright (C) 2002, 2003 Paul Mundt - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ -#ifndef __ASM_SH_UBC_H -#define __ASM_SH_UBC_H -#ifdef __KERNEL__ - -#include - -/* User Break Controller */ -#if defined(CONFIG_CPU_SUBTYPE_SH7707) || defined(CONFIG_CPU_SUBTYPE_SH7709) -#define UBC_TYPE_SH7729 (current_cpu_data.type == CPU_SH7729) -#else -#define UBC_TYPE_SH7729 0 -#endif - -#define BAMR_ASID (1 << 2) -#define BAMR_NONE 0 -#define BAMR_10 0x1 -#define BAMR_12 0x2 -#define BAMR_ALL 0x3 -#define BAMR_16 0x8 -#define BAMR_20 0x9 - -#define BBR_INST (1 << 4) -#define BBR_DATA (2 << 4) -#define BBR_READ (1 << 2) -#define BBR_WRITE (2 << 2) -#define BBR_BYTE 0x1 -#define BBR_HALF 0x2 -#define BBR_LONG 0x3 -#define BBR_QUAD (1 << 6) /* SH7750 */ -#define BBR_CPU (1 << 6) /* SH7709A,SH7729 */ -#define BBR_DMA (2 << 6) /* SH7709A,SH7729 */ - -#define BRCR_CMFA (1 << 15) -#define BRCR_CMFB (1 << 14) -#define BRCR_PCTE (1 << 11) -#define BRCR_PCBA (1 << 10) /* 1: after execution */ -#define BRCR_DBEB (1 << 7) -#define BRCR_PCBB (1 << 6) -#define BRCR_SEQ (1 << 3) -#define BRCR_UBDE (1 << 0) - -#ifndef __ASSEMBLY__ -/* arch/sh/kernel/cpu/ubc.S */ -extern void ubc_sleep(void); - -#ifdef CONFIG_UBC_WAKEUP -extern void ubc_wakeup(void); -#else -#define ubc_wakeup() do { } while (0) -#endif -#endif - -#endif /* __KERNEL__ */ -#endif /* __ASM_SH_UBC_H */ diff --git a/include/asm-sh/ucontext.h b/include/asm-sh/ucontext.h deleted file mode 100644 index 202ef1d5a3c..00000000000 --- a/include/asm-sh/ucontext.h +++ /dev/null @@ -1,12 +0,0 @@ -#ifndef __ASM_SH_UCONTEXT_H -#define __ASM_SH_UCONTEXT_H - -struct ucontext { - unsigned long uc_flags; - struct ucontext *uc_link; - stack_t uc_stack; - struct sigcontext uc_mcontext; - sigset_t uc_sigmask; /* mask last for extensibility */ -}; - -#endif /* __ASM_SH_UCONTEXT_H */ diff --git a/include/asm-sh/unaligned.h b/include/asm-sh/unaligned.h deleted file mode 100644 index c1641a01d50..00000000000 --- a/include/asm-sh/unaligned.h +++ /dev/null @@ -1,19 +0,0 @@ -#ifndef _ASM_SH_UNALIGNED_H -#define _ASM_SH_UNALIGNED_H - -/* SH can't handle unaligned accesses. */ -#ifdef __LITTLE_ENDIAN__ -# include -# include -# include -# define get_unaligned __get_unaligned_le -# define put_unaligned __put_unaligned_le -#else -# include -# include -# include -# define get_unaligned __get_unaligned_be -# define put_unaligned __put_unaligned_be -#endif - -#endif /* _ASM_SH_UNALIGNED_H */ diff --git a/include/asm-sh/unistd.h b/include/asm-sh/unistd.h deleted file mode 100644 index 65be656ead7..00000000000 --- a/include/asm-sh/unistd.h +++ /dev/null @@ -1,13 +0,0 @@ -#ifdef __KERNEL__ -# ifdef CONFIG_SUPERH32 -# include "unistd_32.h" -# else -# include "unistd_64.h" -# endif -#else -# ifdef __SH5__ -# include "unistd_64.h" -# else -# include "unistd_32.h" -# endif -#endif diff --git a/include/asm-sh/unistd_32.h b/include/asm-sh/unistd_32.h deleted file mode 100644 index d52c000cf92..00000000000 --- a/include/asm-sh/unistd_32.h +++ /dev/null @@ -1,384 +0,0 @@ -#ifndef __ASM_SH_UNISTD_H -#define __ASM_SH_UNISTD_H - -/* - * Copyright (C) 1999 Niibe Yutaka - */ - -/* - * This file contains the system call numbers. - */ - -#define __NR_restart_syscall 0 -#define __NR_exit 1 -#define __NR_fork 2 -#define __NR_read 3 -#define __NR_write 4 -#define __NR_open 5 -#define __NR_close 6 -#define __NR_waitpid 7 -#define __NR_creat 8 -#define __NR_link 9 -#define __NR_unlink 10 -#define __NR_execve 11 -#define __NR_chdir 12 -#define __NR_time 13 -#define __NR_mknod 14 -#define __NR_chmod 15 -#define __NR_lchown 16 -#define __NR_break 17 -#define __NR_oldstat 18 -#define __NR_lseek 19 -#define __NR_getpid 20 -#define __NR_mount 21 -#define __NR_umount 22 -#define __NR_setuid 23 -#define __NR_getuid 24 -#define __NR_stime 25 -#define __NR_ptrace 26 -#define __NR_alarm 27 -#define __NR_oldfstat 28 -#define __NR_pause 29 -#define __NR_utime 30 -#define __NR_stty 31 -#define __NR_gtty 32 -#define __NR_access 33 -#define __NR_nice 34 -#define __NR_ftime 35 -#define __NR_sync 36 -#define __NR_kill 37 -#define __NR_rename 38 -#define __NR_mkdir 39 -#define __NR_rmdir 40 -#define __NR_dup 41 -#define __NR_pipe 42 -#define __NR_times 43 -#define __NR_prof 44 -#define __NR_brk 45 -#define __NR_setgid 46 -#define __NR_getgid 47 -#define __NR_signal 48 -#define __NR_geteuid 49 -#define __NR_getegid 50 -#define __NR_acct 51 -#define __NR_umount2 52 -#define __NR_lock 53 -#define __NR_ioctl 54 -#define __NR_fcntl 55 -#define __NR_mpx 56 -#define __NR_setpgid 57 -#define __NR_ulimit 58 -#define __NR_oldolduname 59 -#define __NR_umask 60 -#define __NR_chroot 61 -#define __NR_ustat 62 -#define __NR_dup2 63 -#define __NR_getppid 64 -#define __NR_getpgrp 65 -#define __NR_setsid 66 -#define __NR_sigaction 67 -#define __NR_sgetmask 68 -#define __NR_ssetmask 69 -#define __NR_setreuid 70 -#define __NR_setregid 71 -#define __NR_sigsuspend 72 -#define __NR_sigpending 73 -#define __NR_sethostname 74 -#define __NR_setrlimit 75 -#define __NR_getrlimit 76 /* Back compatible 2Gig limited rlimit */ -#define __NR_getrusage 77 -#define __NR_gettimeofday 78 -#define __NR_settimeofday 79 -#define __NR_getgroups 80 -#define __NR_setgroups 81 -#define __NR_select 82 -#define __NR_symlink 83 -#define __NR_oldlstat 84 -#define __NR_readlink 85 -#define __NR_uselib 86 -#define __NR_swapon 87 -#define __NR_reboot 88 -#define __NR_readdir 89 -#define __NR_mmap 90 -#define __NR_munmap 91 -#define __NR_truncate 92 -#define __NR_ftruncate 93 -#define __NR_fchmod 94 -#define __NR_fchown 95 -#define __NR_getpriority 96 -#define __NR_setpriority 97 -#define __NR_profil 98 -#define __NR_statfs 99 -#define __NR_fstatfs 100 -#define __NR_ioperm 101 -#define __NR_socketcall 102 -#define __NR_syslog 103 -#define __NR_setitimer 104 -#define __NR_getitimer 105 -#define __NR_stat 106 -#define __NR_lstat 107 -#define __NR_fstat 108 -#define __NR_olduname 109 -#define __NR_iopl 110 -#define __NR_vhangup 111 -#define __NR_idle 112 -#define __NR_vm86old 113 -#define __NR_wait4 114 -#define __NR_swapoff 115 -#define __NR_sysinfo 116 -#define __NR_ipc 117 -#define __NR_fsync 118 -#define __NR_sigreturn 119 -#define __NR_clone 120 -#define __NR_setdomainname 121 -#define __NR_uname 122 -#define __NR_modify_ldt 123 -#define __NR_adjtimex 124 -#define __NR_mprotect 125 -#define __NR_sigprocmask 126 -#define __NR_create_module 127 -#define __NR_init_module 128 -#define __NR_delete_module 129 -#define __NR_get_kernel_syms 130 -#define __NR_quotactl 131 -#define __NR_getpgid 132 -#define __NR_fchdir 133 -#define __NR_bdflush 134 -#define __NR_sysfs 135 -#define __NR_personality 136 -#define __NR_afs_syscall 137 /* Syscall for Andrew File System */ -#define __NR_setfsuid 138 -#define __NR_setfsgid 139 -#define __NR__llseek 140 -#define __NR_getdents 141 -#define __NR__newselect 142 -#define __NR_flock 143 -#define __NR_msync 144 -#define __NR_readv 145 -#define __NR_writev 146 -#define __NR_getsid 147 -#define __NR_fdatasync 148 -#define __NR__sysctl 149 -#define __NR_mlock 150 -#define __NR_munlock 151 -#define __NR_mlockall 152 -#define __NR_munlockall 153 -#define __NR_sched_setparam 154 -#define __NR_sched_getparam 155 -#define __NR_sched_setscheduler 156 -#define __NR_sched_getscheduler 157 -#define __NR_sched_yield 158 -#define __NR_sched_get_priority_max 159 -#define __NR_sched_get_priority_min 160 -#define __NR_sched_rr_get_interval 161 -#define __NR_nanosleep 162 -#define __NR_mremap 163 -#define __NR_setresuid 164 -#define __NR_getresuid 165 -#define __NR_vm86 166 -#define __NR_query_module 167 -#define __NR_poll 168 -#define __NR_nfsservctl 169 -#define __NR_setresgid 170 -#define __NR_getresgid 171 -#define __NR_prctl 172 -#define __NR_rt_sigreturn 173 -#define __NR_rt_sigaction 174 -#define __NR_rt_sigprocmask 175 -#define __NR_rt_sigpending 176 -#define __NR_rt_sigtimedwait 177 -#define __NR_rt_sigqueueinfo 178 -#define __NR_rt_sigsuspend 179 -#define __NR_pread64 180 -#define __NR_pwrite64 181 -#define __NR_chown 182 -#define __NR_getcwd 183 -#define __NR_capget 184 -#define __NR_capset 185 -#define __NR_sigaltstack 186 -#define __NR_sendfile 187 -#define __NR_streams1 188 /* some people actually want it */ -#define __NR_streams2 189 /* some people actually want it */ -#define __NR_vfork 190 -#define __NR_ugetrlimit 191 /* SuS compliant getrlimit */ -#define __NR_mmap2 192 -#define __NR_truncate64 193 -#define __NR_ftruncate64 194 -#define __NR_stat64 195 -#define __NR_lstat64 196 -#define __NR_fstat64 197 -#define __NR_lchown32 198 -#define __NR_getuid32 199 -#define __NR_getgid32 200 -#define __NR_geteuid32 201 -#define __NR_getegid32 202 -#define __NR_setreuid32 203 -#define __NR_setregid32 204 -#define __NR_getgroups32 205 -#define __NR_setgroups32 206 -#define __NR_fchown32 207 -#define __NR_setresuid32 208 -#define __NR_getresuid32 209 -#define __NR_setresgid32 210 -#define __NR_getresgid32 211 -#define __NR_chown32 212 -#define __NR_setuid32 213 -#define __NR_setgid32 214 -#define __NR_setfsuid32 215 -#define __NR_setfsgid32 216 -#define __NR_pivot_root 217 -#define __NR_mincore 218 -#define __NR_madvise 219 -#define __NR_getdents64 220 -#define __NR_fcntl64 221 -/* 223 is unused */ -#define __NR_gettid 224 -#define __NR_readahead 225 -#define __NR_setxattr 226 -#define __NR_lsetxattr 227 -#define __NR_fsetxattr 228 -#define __NR_getxattr 229 -#define __NR_lgetxattr 230 -#define __NR_fgetxattr 231 -#define __NR_listxattr 232 -#define __NR_llistxattr 233 -#define __NR_flistxattr 234 -#define __NR_removexattr 235 -#define __NR_lremovexattr 236 -#define __NR_fremovexattr 237 -#define __NR_tkill 238 -#define __NR_sendfile64 239 -#define __NR_futex 240 -#define __NR_sched_setaffinity 241 -#define __NR_sched_getaffinity 242 -#define __NR_set_thread_area 243 -#define __NR_get_thread_area 244 -#define __NR_io_setup 245 -#define __NR_io_destroy 246 -#define __NR_io_getevents 247 -#define __NR_io_submit 248 -#define __NR_io_cancel 249 -#define __NR_fadvise64 250 - -#define __NR_exit_group 252 -#define __NR_lookup_dcookie 253 -#define __NR_epoll_create 254 -#define __NR_epoll_ctl 255 -#define __NR_epoll_wait 256 -#define __NR_remap_file_pages 257 -#define __NR_set_tid_address 258 -#define __NR_timer_create 259 -#define __NR_timer_settime (__NR_timer_create+1) -#define __NR_timer_gettime (__NR_timer_create+2) -#define __NR_timer_getoverrun (__NR_timer_create+3) -#define __NR_timer_delete (__NR_timer_create+4) -#define __NR_clock_settime (__NR_timer_create+5) -#define __NR_clock_gettime (__NR_timer_create+6) -#define __NR_clock_getres (__NR_timer_create+7) -#define __NR_clock_nanosleep (__NR_timer_create+8) -#define __NR_statfs64 268 -#define __NR_fstatfs64 269 -#define __NR_tgkill 270 -#define __NR_utimes 271 -#define __NR_fadvise64_64 272 -#define __NR_vserver 273 -#define __NR_mbind 274 -#define __NR_get_mempolicy 275 -#define __NR_set_mempolicy 276 -#define __NR_mq_open 277 -#define __NR_mq_unlink (__NR_mq_open+1) -#define __NR_mq_timedsend (__NR_mq_open+2) -#define __NR_mq_timedreceive (__NR_mq_open+3) -#define __NR_mq_notify (__NR_mq_open+4) -#define __NR_mq_getsetattr (__NR_mq_open+5) -#define __NR_kexec_load 283 -#define __NR_waitid 284 -#define __NR_add_key 285 -#define __NR_request_key 286 -#define __NR_keyctl 287 -#define __NR_ioprio_set 288 -#define __NR_ioprio_get 289 -#define __NR_inotify_init 290 -#define __NR_inotify_add_watch 291 -#define __NR_inotify_rm_watch 292 -/* 293 is unused */ -#define __NR_migrate_pages 294 -#define __NR_openat 295 -#define __NR_mkdirat 296 -#define __NR_mknodat 297 -#define __NR_fchownat 298 -#define __NR_futimesat 299 -#define __NR_fstatat64 300 -#define __NR_unlinkat 301 -#define __NR_renameat 302 -#define __NR_linkat 303 -#define __NR_symlinkat 304 -#define __NR_readlinkat 305 -#define __NR_fchmodat 306 -#define __NR_faccessat 307 -#define __NR_pselect6 308 -#define __NR_ppoll 309 -#define __NR_unshare 310 -#define __NR_set_robust_list 311 -#define __NR_get_robust_list 312 -#define __NR_splice 313 -#define __NR_sync_file_range 314 -#define __NR_tee 315 -#define __NR_vmsplice 316 -#define __NR_move_pages 317 -#define __NR_getcpu 318 -#define __NR_epoll_pwait 319 -#define __NR_utimensat 320 -#define __NR_signalfd 321 -#define __NR_timerfd_create 322 -#define __NR_eventfd 323 -#define __NR_fallocate 324 -#define __NR_timerfd_settime 325 -#define __NR_timerfd_gettime 326 -#define __NR_signalfd4 327 -#define __NR_eventfd2 328 -#define __NR_epoll_create1 329 -#define __NR_dup3 330 -#define __NR_pipe2 331 -#define __NR_inotify_init1 332 - -#define NR_syscalls 333 - -#ifdef __KERNEL__ - -#define __ARCH_WANT_IPC_PARSE_VERSION -#define __ARCH_WANT_OLD_READDIR -#define __ARCH_WANT_OLD_STAT -#define __ARCH_WANT_STAT64 -#define __ARCH_WANT_SYS_ALARM -#define __ARCH_WANT_SYS_GETHOSTNAME -#define __ARCH_WANT_SYS_PAUSE -#define __ARCH_WANT_SYS_SGETMASK -#define __ARCH_WANT_SYS_SIGNAL -#define __ARCH_WANT_SYS_TIME -#define __ARCH_WANT_SYS_UTIME -#define __ARCH_WANT_SYS_WAITPID -#define __ARCH_WANT_SYS_SOCKETCALL -#define __ARCH_WANT_SYS_FADVISE64 -#define __ARCH_WANT_SYS_GETPGRP -#define __ARCH_WANT_SYS_LLSEEK -#define __ARCH_WANT_SYS_NICE -#define __ARCH_WANT_SYS_OLD_GETRLIMIT -#define __ARCH_WANT_SYS_OLDUMOUNT -#define __ARCH_WANT_SYS_SIGPENDING -#define __ARCH_WANT_SYS_SIGPROCMASK -#define __ARCH_WANT_SYS_RT_SIGACTION -#define __ARCH_WANT_SYS_RT_SIGSUSPEND - -/* - * "Conditional" syscalls - * - * What we want is __attribute__((weak,alias("sys_ni_syscall"))), - * but it doesn't work on all toolchains, so we just do it by hand - */ -#ifndef cond_syscall -#define cond_syscall(x) asm(".weak\t" #x "\n\t.set\t" #x ",sys_ni_syscall") -#endif - -#endif /* __KERNEL__ */ -#endif /* __ASM_SH_UNISTD_H */ diff --git a/include/asm-sh/unistd_64.h b/include/asm-sh/unistd_64.h deleted file mode 100644 index 7c54e91753c..00000000000 --- a/include/asm-sh/unistd_64.h +++ /dev/null @@ -1,423 +0,0 @@ -#ifndef __ASM_SH_UNISTD_64_H -#define __ASM_SH_UNISTD_64_H - -/* - * include/asm-sh/unistd_64.h - * - * This file contains the system call numbers. - * - * Copyright (C) 2000, 2001 Paolo Alberelli - * Copyright (C) 2003 - 2007 Paul Mundt - * Copyright (C) 2004 Sean McGoogan - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ -#define __NR_restart_syscall 0 -#define __NR_exit 1 -#define __NR_fork 2 -#define __NR_read 3 -#define __NR_write 4 -#define __NR_open 5 -#define __NR_close 6 -#define __NR_waitpid 7 -#define __NR_creat 8 -#define __NR_link 9 -#define __NR_unlink 10 -#define __NR_execve 11 -#define __NR_chdir 12 -#define __NR_time 13 -#define __NR_mknod 14 -#define __NR_chmod 15 -#define __NR_lchown 16 -#define __NR_break 17 -#define __NR_oldstat 18 -#define __NR_lseek 19 -#define __NR_getpid 20 -#define __NR_mount 21 -#define __NR_umount 22 -#define __NR_setuid 23 -#define __NR_getuid 24 -#define __NR_stime 25 -#define __NR_ptrace 26 -#define __NR_alarm 27 -#define __NR_oldfstat 28 -#define __NR_pause 29 -#define __NR_utime 30 -#define __NR_stty 31 -#define __NR_gtty 32 -#define __NR_access 33 -#define __NR_nice 34 -#define __NR_ftime 35 -#define __NR_sync 36 -#define __NR_kill 37 -#define __NR_rename 38 -#define __NR_mkdir 39 -#define __NR_rmdir 40 -#define __NR_dup 41 -#define __NR_pipe 42 -#define __NR_times 43 -#define __NR_prof 44 -#define __NR_brk 45 -#define __NR_setgid 46 -#define __NR_getgid 47 -#define __NR_signal 48 -#define __NR_geteuid 49 -#define __NR_getegid 50 -#define __NR_acct 51 -#define __NR_umount2 52 -#define __NR_lock 53 -#define __NR_ioctl 54 -#define __NR_fcntl 55 -#define __NR_mpx 56 -#define __NR_setpgid 57 -#define __NR_ulimit 58 -#define __NR_oldolduname 59 -#define __NR_umask 60 -#define __NR_chroot 61 -#define __NR_ustat 62 -#define __NR_dup2 63 -#define __NR_getppid 64 -#define __NR_getpgrp 65 -#define __NR_setsid 66 -#define __NR_sigaction 67 -#define __NR_sgetmask 68 -#define __NR_ssetmask 69 -#define __NR_setreuid 70 -#define __NR_setregid 71 -#define __NR_sigsuspend 72 -#define __NR_sigpending 73 -#define __NR_sethostname 74 -#define __NR_setrlimit 75 -#define __NR_getrlimit 76 /* Back compatible 2Gig limited rlimit */ -#define __NR_getrusage 77 -#define __NR_gettimeofday 78 -#define __NR_settimeofday 79 -#define __NR_getgroups 80 -#define __NR_setgroups 81 -#define __NR_select 82 -#define __NR_symlink 83 -#define __NR_oldlstat 84 -#define __NR_readlink 85 -#define __NR_uselib 86 -#define __NR_swapon 87 -#define __NR_reboot 88 -#define __NR_readdir 89 -#define __NR_mmap 90 -#define __NR_munmap 91 -#define __NR_truncate 92 -#define __NR_ftruncate 93 -#define __NR_fchmod 94 -#define __NR_fchown 95 -#define __NR_getpriority 96 -#define __NR_setpriority 97 -#define __NR_profil 98 -#define __NR_statfs 99 -#define __NR_fstatfs 100 -#define __NR_ioperm 101 -#define __NR_socketcall 102 /* old implementation of socket systemcall */ -#define __NR_syslog 103 -#define __NR_setitimer 104 -#define __NR_getitimer 105 -#define __NR_stat 106 -#define __NR_lstat 107 -#define __NR_fstat 108 -#define __NR_olduname 109 -#define __NR_iopl 110 -#define __NR_vhangup 111 -#define __NR_idle 112 -#define __NR_vm86old 113 -#define __NR_wait4 114 -#define __NR_swapoff 115 -#define __NR_sysinfo 116 -#define __NR_ipc 117 -#define __NR_fsync 118 -#define __NR_sigreturn 119 -#define __NR_clone 120 -#define __NR_setdomainname 121 -#define __NR_uname 122 -#define __NR_modify_ldt 123 -#define __NR_adjtimex 124 -#define __NR_mprotect 125 -#define __NR_sigprocmask 126 -#define __NR_create_module 127 -#define __NR_init_module 128 -#define __NR_delete_module 129 -#define __NR_get_kernel_syms 130 -#define __NR_quotactl 131 -#define __NR_getpgid 132 -#define __NR_fchdir 133 -#define __NR_bdflush 134 -#define __NR_sysfs 135 -#define __NR_personality 136 -#define __NR_afs_syscall 137 /* Syscall for Andrew File System */ -#define __NR_setfsuid 138 -#define __NR_setfsgid 139 -#define __NR__llseek 140 -#define __NR_getdents 141 -#define __NR__newselect 142 -#define __NR_flock 143 -#define __NR_msync 144 -#define __NR_readv 145 -#define __NR_writev 146 -#define __NR_getsid 147 -#define __NR_fdatasync 148 -#define __NR__sysctl 149 -#define __NR_mlock 150 -#define __NR_munlock 151 -#define __NR_mlockall 152 -#define __NR_munlockall 153 -#define __NR_sched_setparam 154 -#define __NR_sched_getparam 155 -#define __NR_sched_setscheduler 156 -#define __NR_sched_getscheduler 157 -#define __NR_sched_yield 158 -#define __NR_sched_get_priority_max 159 -#define __NR_sched_get_priority_min 160 -#define __NR_sched_rr_get_interval 161 -#define __NR_nanosleep 162 -#define __NR_mremap 163 -#define __NR_setresuid 164 -#define __NR_getresuid 165 -#define __NR_vm86 166 -#define __NR_query_module 167 -#define __NR_poll 168 -#define __NR_nfsservctl 169 -#define __NR_setresgid 170 -#define __NR_getresgid 171 -#define __NR_prctl 172 -#define __NR_rt_sigreturn 173 -#define __NR_rt_sigaction 174 -#define __NR_rt_sigprocmask 175 -#define __NR_rt_sigpending 176 -#define __NR_rt_sigtimedwait 177 -#define __NR_rt_sigqueueinfo 178 -#define __NR_rt_sigsuspend 179 -#define __NR_pread64 180 -#define __NR_pwrite64 181 -#define __NR_chown 182 -#define __NR_getcwd 183 -#define __NR_capget 184 -#define __NR_capset 185 -#define __NR_sigaltstack 186 -#define __NR_sendfile 187 -#define __NR_streams1 188 /* some people actually want it */ -#define __NR_streams2 189 /* some people actually want it */ -#define __NR_vfork 190 -#define __NR_ugetrlimit 191 /* SuS compliant getrlimit */ -#define __NR_mmap2 192 -#define __NR_truncate64 193 -#define __NR_ftruncate64 194 -#define __NR_stat64 195 -#define __NR_lstat64 196 -#define __NR_fstat64 197 -#define __NR_lchown32 198 -#define __NR_getuid32 199 -#define __NR_getgid32 200 -#define __NR_geteuid32 201 -#define __NR_getegid32 202 -#define __NR_setreuid32 203 -#define __NR_setregid32 204 -#define __NR_getgroups32 205 -#define __NR_setgroups32 206 -#define __NR_fchown32 207 -#define __NR_setresuid32 208 -#define __NR_getresuid32 209 -#define __NR_setresgid32 210 -#define __NR_getresgid32 211 -#define __NR_chown32 212 -#define __NR_setuid32 213 -#define __NR_setgid32 214 -#define __NR_setfsuid32 215 -#define __NR_setfsgid32 216 -#define __NR_pivot_root 217 -#define __NR_mincore 218 -#define __NR_madvise 219 - -/* Non-multiplexed socket family */ -#define __NR_socket 220 -#define __NR_bind 221 -#define __NR_connect 222 -#define __NR_listen 223 -#define __NR_accept 224 -#define __NR_getsockname 225 -#define __NR_getpeername 226 -#define __NR_socketpair 227 -#define __NR_send 228 -#define __NR_sendto 229 -#define __NR_recv 230 -#define __NR_recvfrom 231 -#define __NR_shutdown 232 -#define __NR_setsockopt 233 -#define __NR_getsockopt 234 -#define __NR_sendmsg 235 -#define __NR_recvmsg 236 - -/* Non-multiplexed IPC family */ -#define __NR_semop 237 -#define __NR_semget 238 -#define __NR_semctl 239 -#define __NR_msgsnd 240 -#define __NR_msgrcv 241 -#define __NR_msgget 242 -#define __NR_msgctl 243 -#if 0 -#define __NR_shmatcall 244 -#endif -#define __NR_shmdt 245 -#define __NR_shmget 246 -#define __NR_shmctl 247 - -#define __NR_getdents64 248 -#define __NR_fcntl64 249 -/* 223 is unused */ -#define __NR_gettid 252 -#define __NR_readahead 253 -#define __NR_setxattr 254 -#define __NR_lsetxattr 255 -#define __NR_fsetxattr 256 -#define __NR_getxattr 257 -#define __NR_lgetxattr 258 -#define __NR_fgetxattr 269 -#define __NR_listxattr 260 -#define __NR_llistxattr 261 -#define __NR_flistxattr 262 -#define __NR_removexattr 263 -#define __NR_lremovexattr 264 -#define __NR_fremovexattr 265 -#define __NR_tkill 266 -#define __NR_sendfile64 267 -#define __NR_futex 268 -#define __NR_sched_setaffinity 269 -#define __NR_sched_getaffinity 270 -#define __NR_set_thread_area 271 -#define __NR_get_thread_area 272 -#define __NR_io_setup 273 -#define __NR_io_destroy 274 -#define __NR_io_getevents 275 -#define __NR_io_submit 276 -#define __NR_io_cancel 277 -#define __NR_fadvise64 278 -#define __NR_exit_group 280 - -#define __NR_lookup_dcookie 281 -#define __NR_epoll_create 282 -#define __NR_epoll_ctl 283 -#define __NR_epoll_wait 284 -#define __NR_remap_file_pages 285 -#define __NR_set_tid_address 286 -#define __NR_timer_create 287 -#define __NR_timer_settime (__NR_timer_create+1) -#define __NR_timer_gettime (__NR_timer_create+2) -#define __NR_timer_getoverrun (__NR_timer_create+3) -#define __NR_timer_delete (__NR_timer_create+4) -#define __NR_clock_settime (__NR_timer_create+5) -#define __NR_clock_gettime (__NR_timer_create+6) -#define __NR_clock_getres (__NR_timer_create+7) -#define __NR_clock_nanosleep (__NR_timer_create+8) -#define __NR_statfs64 296 -#define __NR_fstatfs64 297 -#define __NR_tgkill 298 -#define __NR_utimes 299 -#define __NR_fadvise64_64 300 -#define __NR_vserver 301 -#define __NR_mbind 302 -#define __NR_get_mempolicy 303 -#define __NR_set_mempolicy 304 -#define __NR_mq_open 305 -#define __NR_mq_unlink (__NR_mq_open+1) -#define __NR_mq_timedsend (__NR_mq_open+2) -#define __NR_mq_timedreceive (__NR_mq_open+3) -#define __NR_mq_notify (__NR_mq_open+4) -#define __NR_mq_getsetattr (__NR_mq_open+5) -#define __NR_kexec_load 311 -#define __NR_waitid 312 -#define __NR_add_key 313 -#define __NR_request_key 314 -#define __NR_keyctl 315 -#define __NR_ioprio_set 316 -#define __NR_ioprio_get 317 -#define __NR_inotify_init 318 -#define __NR_inotify_add_watch 319 -#define __NR_inotify_rm_watch 320 -/* 321 is unused */ -#define __NR_migrate_pages 322 -#define __NR_openat 323 -#define __NR_mkdirat 324 -#define __NR_mknodat 325 -#define __NR_fchownat 326 -#define __NR_futimesat 327 -#define __NR_fstatat64 328 -#define __NR_unlinkat 329 -#define __NR_renameat 330 -#define __NR_linkat 331 -#define __NR_symlinkat 332 -#define __NR_readlinkat 333 -#define __NR_fchmodat 334 -#define __NR_faccessat 335 -#define __NR_pselect6 336 -#define __NR_ppoll 337 -#define __NR_unshare 338 -#define __NR_set_robust_list 339 -#define __NR_get_robust_list 340 -#define __NR_splice 341 -#define __NR_sync_file_range 342 -#define __NR_tee 343 -#define __NR_vmsplice 344 -#define __NR_move_pages 345 -#define __NR_getcpu 346 -#define __NR_epoll_pwait 347 -#define __NR_utimensat 348 -#define __NR_signalfd 349 -#define __NR_timerfd_create 350 -#define __NR_eventfd 351 -#define __NR_fallocate 352 -#define __NR_timerfd_settime 353 -#define __NR_timerfd_gettime 354 -#define __NR_signalfd4 355 -#define __NR_eventfd2 356 -#define __NR_epoll_create1 357 -#define __NR_dup3 358 -#define __NR_pipe2 359 -#define __NR_inotify_init1 360 - -#ifdef __KERNEL__ - -#define NR_syscalls 361 - -#define __ARCH_WANT_IPC_PARSE_VERSION -#define __ARCH_WANT_OLD_READDIR -#define __ARCH_WANT_OLD_STAT -#define __ARCH_WANT_STAT64 -#define __ARCH_WANT_SYS_ALARM -#define __ARCH_WANT_SYS_GETHOSTNAME -#define __ARCH_WANT_SYS_PAUSE -#define __ARCH_WANT_SYS_SGETMASK -#define __ARCH_WANT_SYS_SIGNAL -#define __ARCH_WANT_SYS_TIME -#define __ARCH_WANT_SYS_UTIME -#define __ARCH_WANT_SYS_WAITPID -#define __ARCH_WANT_SYS_SOCKETCALL -#define __ARCH_WANT_SYS_FADVISE64 -#define __ARCH_WANT_SYS_GETPGRP -#define __ARCH_WANT_SYS_LLSEEK -#define __ARCH_WANT_SYS_NICE -#define __ARCH_WANT_SYS_OLD_GETRLIMIT -#define __ARCH_WANT_SYS_OLDUMOUNT -#define __ARCH_WANT_SYS_SIGPENDING -#define __ARCH_WANT_SYS_SIGPROCMASK -#define __ARCH_WANT_SYS_RT_SIGACTION - -/* - * "Conditional" syscalls - * - * What we want is __attribute__((weak,alias("sys_ni_syscall"))), - * but it doesn't work on all toolchains, so we just do it by hand - */ -#ifndef cond_syscall -#define cond_syscall(x) asm(".weak\t" #x "\n\t.set\t" #x ",sys_ni_syscall") -#endif - -#endif /* __KERNEL__ */ -#endif /* __ASM_SH_UNISTD_64_H */ diff --git a/include/asm-sh/user.h b/include/asm-sh/user.h deleted file mode 100644 index 8fd3cf6c58d..00000000000 --- a/include/asm-sh/user.h +++ /dev/null @@ -1,67 +0,0 @@ -#ifndef __ASM_SH_USER_H -#define __ASM_SH_USER_H - -#include -#include - -/* - * Core file format: The core file is written in such a way that gdb - * can understand it and provide useful information to the user (under - * linux we use the `trad-core' bfd). The file contents are as follows: - * - * upage: 1 page consisting of a user struct that tells gdb - * what is present in the file. Directly after this is a - * copy of the task_struct, which is currently not used by gdb, - * but it may come in handy at some point. All of the registers - * are stored as part of the upage. The upage should always be - * only one page long. - * data: The data segment follows next. We use current->end_text to - * current->brk to pick up all of the user variables, plus any memory - * that may have been sbrk'ed. No attempt is made to determine if a - * page is demand-zero or if a page is totally unused, we just cover - * the entire range. All of the addresses are rounded in such a way - * that an integral number of pages is written. - * stack: We need the stack information in order to get a meaningful - * backtrace. We need to write the data from usp to - * current->start_stack, so we round each of these in order to be able - * to write an integer number of pages. - */ - -#if defined(__SH5__) || defined(CONFIG_CPU_SH5) -struct user_fpu_struct { - unsigned long fp_regs[32]; - unsigned int fpscr; -}; -#else -struct user_fpu_struct { - unsigned long fp_regs[16]; - unsigned long xfp_regs[16]; - unsigned long fpscr; - unsigned long fpul; -}; -#endif - -struct user { - struct pt_regs regs; /* entire machine state */ - struct user_fpu_struct fpu; /* Math Co-processor registers */ - int u_fpvalid; /* True if math co-processor being used */ - size_t u_tsize; /* text size (pages) */ - size_t u_dsize; /* data size (pages) */ - size_t u_ssize; /* stack size (pages) */ - unsigned long start_code; /* text starting address */ - unsigned long start_data; /* data starting address */ - unsigned long start_stack; /* stack starting address */ - long int signal; /* signal causing core dump */ - unsigned long u_ar0; /* help gdb find registers */ - struct user_fpu_struct* u_fpstate; /* Math Co-processor pointer */ - unsigned long magic; /* identifies a core file */ - char u_comm[32]; /* user command name */ -}; - -#define NBPG PAGE_SIZE -#define UPAGES 1 -#define HOST_TEXT_START_ADDR (u.start_code) -#define HOST_DATA_START_ADDR (u.start_data) -#define HOST_STACK_END_ADDR (u.start_stack + u.u_ssize * NBPG) - -#endif /* __ASM_SH_USER_H */ diff --git a/include/asm-sh/vga.h b/include/asm-sh/vga.h deleted file mode 100644 index 06a5de8ace1..00000000000 --- a/include/asm-sh/vga.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef __ASM_SH_VGA_H -#define __ASM_SH_VGA_H - -/* Stupid drivers. */ - -#endif /* __ASM_SH_VGA_H */ diff --git a/include/asm-sh/watchdog.h b/include/asm-sh/watchdog.h deleted file mode 100644 index d19ea62ef8c..00000000000 --- a/include/asm-sh/watchdog.h +++ /dev/null @@ -1,107 +0,0 @@ -/* - * include/asm-sh/watchdog.h - * - * Copyright (C) 2002, 2003 Paul Mundt - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ -#ifndef __ASM_SH_WATCHDOG_H -#define __ASM_SH_WATCHDOG_H -#ifdef __KERNEL__ - -#include -#include -#include - -/* - * See asm/cpu-sh2/watchdog.h for explanation of this stupidity.. - */ -#ifndef WTCNT_R -# define WTCNT_R WTCNT -#endif - -#ifndef WTCSR_R -# define WTCSR_R WTCSR -#endif - -#define WTCNT_HIGH 0x5a -#define WTCSR_HIGH 0xa5 - -#define WTCSR_CKS2 0x04 -#define WTCSR_CKS1 0x02 -#define WTCSR_CKS0 0x01 - -/* - * CKS0-2 supports a number of clock division ratios. At the time the watchdog - * is enabled, it defaults to a 41 usec overflow period .. we overload this to - * something a little more reasonable, and really can't deal with anything - * lower than WTCSR_CKS_1024, else we drop back into the usec range. - * - * Clock Division Ratio Overflow Period - * -------------------------------------------- - * 1/32 (initial value) 41 usecs - * 1/64 82 usecs - * 1/128 164 usecs - * 1/256 328 usecs - * 1/512 656 usecs - * 1/1024 1.31 msecs - * 1/2048 2.62 msecs - * 1/4096 5.25 msecs - */ -#define WTCSR_CKS_32 0x00 -#define WTCSR_CKS_64 0x01 -#define WTCSR_CKS_128 0x02 -#define WTCSR_CKS_256 0x03 -#define WTCSR_CKS_512 0x04 -#define WTCSR_CKS_1024 0x05 -#define WTCSR_CKS_2048 0x06 -#define WTCSR_CKS_4096 0x07 - -/** - * sh_wdt_read_cnt - Read from Counter - * Reads back the WTCNT value. - */ -static inline __u8 sh_wdt_read_cnt(void) -{ - return ctrl_inb(WTCNT_R); -} - -/** - * sh_wdt_write_cnt - Write to Counter - * @val: Value to write - * - * Writes the given value @val to the lower byte of the timer counter. - * The upper byte is set manually on each write. - */ -static inline void sh_wdt_write_cnt(__u8 val) -{ - ctrl_outw((WTCNT_HIGH << 8) | (__u16)val, WTCNT); -} - -/** - * sh_wdt_read_csr - Read from Control/Status Register - * - * Reads back the WTCSR value. - */ -static inline __u8 sh_wdt_read_csr(void) -{ - return ctrl_inb(WTCSR_R); -} - -/** - * sh_wdt_write_csr - Write to Control/Status Register - * @val: Value to write - * - * Writes the given value @val to the lower byte of the control/status - * register. The upper byte is set manually on each write. - */ -static inline void sh_wdt_write_csr(__u8 val) -{ - ctrl_outw((WTCSR_HIGH << 8) | (__u16)val, WTCSR); -} - -#endif /* __KERNEL__ */ -#endif /* __ASM_SH_WATCHDOG_H */ diff --git a/include/asm-sh/xor.h b/include/asm-sh/xor.h deleted file mode 100644 index c82eb12a5b1..00000000000 --- a/include/asm-sh/xor.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/sound/sh/aica.c b/sound/sh/aica.c index 9ca11332614..54df8baf916 100644 --- a/sound/sh/aica.c +++ b/sound/sh/aica.c @@ -42,7 +42,7 @@ #include #include #include -#include +#include #include "aica.h" MODULE_AUTHOR("Adrian McMenamin "); -- cgit v1.2.3-70-g09d2 From cc64f7f70033d6cf18f716c885a7df858ad51766 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Tue, 29 Jul 2008 08:24:50 +0900 Subject: sh: dreamcast: fix build failure from header reorg. Oops, machvec.h is in asm/, it was previously removed due to overzealous trimming. Fix up the path again. Signed-off-by: Paul Mundt --- arch/sh/boards/dreamcast/setup.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/sh/boards') diff --git a/arch/sh/boards/dreamcast/setup.c b/arch/sh/boards/dreamcast/setup.c index 14c3e57ff41..7d944fc75e9 100644 --- a/arch/sh/boards/dreamcast/setup.c +++ b/arch/sh/boards/dreamcast/setup.c @@ -25,7 +25,7 @@ #include #include #include -#include +#include #include extern struct hw_interrupt_type systemasic_int; -- cgit v1.2.3-70-g09d2 From 4864841a34ad77a5054f20d18453ae38a926afd8 Mon Sep 17 00:00:00 2001 From: Nobuhiro Iwamatsu Date: Tue, 29 Jul 2008 14:37:25 +0900 Subject: sh: Fix compile error of Solution Engine When I compiled Solution Engine, this become compile error because plaform device of sh_eth device becomes enable. When sh7710/sh7712 which could use sh_eth was chosen, revised it so that platform device of sh_eth device became enable. Signed-off-by: Nobuhiro Iwamatsu Signed-off-by: Paul Mundt --- arch/sh/boards/se/770x/setup.c | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'arch/sh/boards') diff --git a/arch/sh/boards/se/770x/setup.c b/arch/sh/boards/se/770x/setup.c index cf4a5ba12df..6c64d774da3 100644 --- a/arch/sh/boards/se/770x/setup.c +++ b/arch/sh/boards/se/770x/setup.c @@ -113,6 +113,8 @@ static struct platform_device heartbeat_device = { .resource = heartbeat_resources, }; +#if defined(CONFIG_CPU_SUBTYPE_SH7710) ||\ + defined(CONFIG_CPU_SUBTYPE_SH7712) /* SH771X Ethernet driver */ static struct resource sh_eth0_resources[] = { [0] = { @@ -159,12 +161,16 @@ static struct platform_device sh_eth1_device = { .num_resources = ARRAY_SIZE(sh_eth1_resources), .resource = sh_eth1_resources, }; +#endif static struct platform_device *se_devices[] __initdata = { &heartbeat_device, &cf_ide_device, +#if defined(CONFIG_CPU_SUBTYPE_SH7710) ||\ + defined(CONFIG_CPU_SUBTYPE_SH7712) &sh_eth0_device, &sh_eth1_device, +#endif }; static int __init se_devices_setup(void) -- cgit v1.2.3-70-g09d2 From da2014a2b080e7f3024a4eb6917d47069ad9620b Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Tue, 29 Jul 2008 21:01:19 +0900 Subject: sh: Shuffle the board directories in to mach groups. This flattens out the board directories in to individual mach groups, we will use this for getting rid of unneeded directories, simplifying the build system, and becoming more coherent with the refactored arch/sh/include topology. Signed-off-by: Paul Mundt --- arch/sh/Kconfig | 10 +- arch/sh/Makefile | 60 +-- arch/sh/boards/cayman/Makefile | 5 - arch/sh/boards/cayman/irq.c | 197 ---------- arch/sh/boards/cayman/led.c | 51 --- arch/sh/boards/cayman/setup.c | 187 ---------- arch/sh/boards/dreamcast/Makefile | 6 - arch/sh/boards/dreamcast/irq.c | 153 -------- arch/sh/boards/dreamcast/rtc.c | 81 ----- arch/sh/boards/dreamcast/setup.c | 64 ---- arch/sh/boards/hp6xx/Makefile | 7 - arch/sh/boards/hp6xx/hp6xx_apm.c | 111 ------ arch/sh/boards/hp6xx/pm.c | 81 ----- arch/sh/boards/hp6xx/pm_wakeup.S | 58 --- arch/sh/boards/hp6xx/setup.c | 121 ------- arch/sh/boards/landisk/Makefile | 5 - arch/sh/boards/landisk/gio.c | 171 --------- arch/sh/boards/landisk/irq.c | 56 --- arch/sh/boards/landisk/psw.c | 143 -------- arch/sh/boards/landisk/setup.c | 105 ------ arch/sh/boards/lboxre2/Makefile | 5 - arch/sh/boards/lboxre2/irq.c | 31 -- arch/sh/boards/lboxre2/setup.c | 84 ----- arch/sh/boards/mach-ap325rxa/Makefile | 1 + arch/sh/boards/mach-ap325rxa/setup.c | 313 ++++++++++++++++ arch/sh/boards/mach-cayman/Makefile | 5 + arch/sh/boards/mach-cayman/irq.c | 197 ++++++++++ arch/sh/boards/mach-cayman/led.c | 51 +++ arch/sh/boards/mach-cayman/setup.c | 187 ++++++++++ arch/sh/boards/mach-dreamcast/Makefile | 6 + arch/sh/boards/mach-dreamcast/irq.c | 153 ++++++++ arch/sh/boards/mach-dreamcast/rtc.c | 81 +++++ arch/sh/boards/mach-dreamcast/setup.c | 64 ++++ arch/sh/boards/mach-edosk7705/Makefile | 6 + arch/sh/boards/mach-edosk7705/io.c | 94 +++++ arch/sh/boards/mach-edosk7705/setup.c | 43 +++ arch/sh/boards/mach-highlander/Kconfig | 24 ++ arch/sh/boards/mach-highlander/Makefile | 11 + arch/sh/boards/mach-highlander/irq-r7780mp.c | 74 ++++ arch/sh/boards/mach-highlander/irq-r7780rp.c | 67 ++++ arch/sh/boards/mach-highlander/irq-r7785rp.c | 86 +++++ arch/sh/boards/mach-highlander/psw.c | 122 +++++++ arch/sh/boards/mach-highlander/setup.c | 345 ++++++++++++++++++ arch/sh/boards/mach-hp6xx/Makefile | 7 + arch/sh/boards/mach-hp6xx/hp6xx_apm.c | 111 ++++++ arch/sh/boards/mach-hp6xx/pm.c | 81 +++++ arch/sh/boards/mach-hp6xx/pm_wakeup.S | 58 +++ arch/sh/boards/mach-hp6xx/setup.c | 121 +++++++ arch/sh/boards/mach-landisk/Makefile | 5 + arch/sh/boards/mach-landisk/gio.c | 171 +++++++++ arch/sh/boards/mach-landisk/irq.c | 56 +++ arch/sh/boards/mach-landisk/psw.c | 143 ++++++++ arch/sh/boards/mach-landisk/setup.c | 105 ++++++ arch/sh/boards/mach-lboxre2/Makefile | 5 + arch/sh/boards/mach-lboxre2/irq.c | 31 ++ arch/sh/boards/mach-lboxre2/setup.c | 84 +++++ arch/sh/boards/mach-magicpanelr2/Kconfig | 13 + arch/sh/boards/mach-magicpanelr2/Makefile | 5 + arch/sh/boards/mach-magicpanelr2/setup.c | 394 ++++++++++++++++++++ arch/sh/boards/mach-microdev/Makefile | 8 + arch/sh/boards/mach-microdev/io.c | 367 +++++++++++++++++++ arch/sh/boards/mach-microdev/irq.c | 183 ++++++++++ arch/sh/boards/mach-microdev/led.c | 101 ++++++ arch/sh/boards/mach-microdev/setup.c | 405 +++++++++++++++++++++ arch/sh/boards/mach-migor/Kconfig | 15 + arch/sh/boards/mach-migor/Makefile | 2 + arch/sh/boards/mach-migor/lcd_qvga.c | 165 +++++++++ arch/sh/boards/mach-migor/setup.c | 523 +++++++++++++++++++++++++++ arch/sh/boards/mach-r2d/Kconfig | 23 ++ arch/sh/boards/mach-r2d/Makefile | 5 + arch/sh/boards/mach-r2d/irq.c | 155 ++++++++ arch/sh/boards/mach-r2d/setup.c | 258 +++++++++++++ arch/sh/boards/mach-rsk7203/Makefile | 1 + arch/sh/boards/mach-rsk7203/setup.c | 136 +++++++ arch/sh/boards/mach-sdk7780/Kconfig | 16 + arch/sh/boards/mach-sdk7780/Makefile | 5 + arch/sh/boards/mach-sdk7780/irq.c | 46 +++ arch/sh/boards/mach-sdk7780/setup.c | 109 ++++++ arch/sh/boards/mach-se/7206/Makefile | 5 + arch/sh/boards/mach-se/7206/io.c | 104 ++++++ arch/sh/boards/mach-se/7206/irq.c | 146 ++++++++ arch/sh/boards/mach-se/7206/setup.c | 108 ++++++ arch/sh/boards/mach-se/7343/Makefile | 5 + arch/sh/boards/mach-se/7343/io.c | 273 ++++++++++++++ arch/sh/boards/mach-se/7343/irq.c | 80 ++++ arch/sh/boards/mach-se/7343/setup.c | 152 ++++++++ arch/sh/boards/mach-se/7619/Makefile | 5 + arch/sh/boards/mach-se/7619/setup.c | 21 ++ arch/sh/boards/mach-se/770x/Makefile | 5 + arch/sh/boards/mach-se/770x/io.c | 156 ++++++++ arch/sh/boards/mach-se/770x/irq.c | 108 ++++++ arch/sh/boards/mach-se/770x/setup.c | 222 ++++++++++++ arch/sh/boards/mach-se/7721/Makefile | 1 + arch/sh/boards/mach-se/7721/irq.c | 45 +++ arch/sh/boards/mach-se/7721/setup.c | 99 +++++ arch/sh/boards/mach-se/7722/Makefile | 10 + arch/sh/boards/mach-se/7722/irq.c | 76 ++++ arch/sh/boards/mach-se/7722/setup.c | 194 ++++++++++ arch/sh/boards/mach-se/7751/Makefile | 7 + arch/sh/boards/mach-se/7751/io.c | 135 +++++++ arch/sh/boards/mach-se/7751/irq.c | 50 +++ arch/sh/boards/mach-se/7751/pci.c | 147 ++++++++ arch/sh/boards/mach-se/7751/setup.c | 78 ++++ arch/sh/boards/mach-se/7780/Makefile | 10 + arch/sh/boards/mach-se/7780/irq.c | 46 +++ arch/sh/boards/mach-se/7780/setup.c | 124 +++++++ arch/sh/boards/mach-sh03/Makefile | 5 + arch/sh/boards/mach-sh03/rtc.c | 132 +++++++ arch/sh/boards/mach-sh03/setup.c | 75 ++++ arch/sh/boards/mach-sh7763rdp/Makefile | 1 + arch/sh/boards/mach-sh7763rdp/irq.c | 45 +++ arch/sh/boards/mach-sh7763rdp/setup.c | 128 +++++++ arch/sh/boards/mach-sh7785lcr/Makefile | 1 + arch/sh/boards/mach-sh7785lcr/setup.c | 302 ++++++++++++++++ arch/sh/boards/mach-shmin/Makefile | 5 + arch/sh/boards/mach-shmin/setup.c | 42 +++ arch/sh/boards/mach-snapgear/Makefile | 5 + arch/sh/boards/mach-snapgear/io.c | 137 +++++++ arch/sh/boards/mach-snapgear/setup.c | 95 +++++ arch/sh/boards/mach-systemh/Makefile | 13 + arch/sh/boards/mach-systemh/io.c | 174 +++++++++ arch/sh/boards/mach-systemh/irq.c | 102 ++++++ arch/sh/boards/mach-systemh/setup.c | 57 +++ arch/sh/boards/mach-titan/Makefile | 5 + arch/sh/boards/mach-titan/io.c | 126 +++++++ arch/sh/boards/mach-titan/setup.c | 44 +++ arch/sh/boards/mach-x3proto/Makefile | 1 + arch/sh/boards/mach-x3proto/ilsel.c | 151 ++++++++ arch/sh/boards/mach-x3proto/setup.c | 136 +++++++ arch/sh/boards/magicpanelr2/Kconfig | 13 - arch/sh/boards/magicpanelr2/Makefile | 5 - arch/sh/boards/magicpanelr2/setup.c | 394 -------------------- arch/sh/boards/renesas/ap325rxa/Makefile | 1 - arch/sh/boards/renesas/ap325rxa/setup.c | 313 ---------------- arch/sh/boards/renesas/edosk7705/Makefile | 6 - arch/sh/boards/renesas/edosk7705/io.c | 94 ----- arch/sh/boards/renesas/edosk7705/setup.c | 43 --- arch/sh/boards/renesas/migor/Kconfig | 15 - arch/sh/boards/renesas/migor/Makefile | 2 - arch/sh/boards/renesas/migor/lcd_qvga.c | 165 --------- arch/sh/boards/renesas/migor/setup.c | 523 --------------------------- arch/sh/boards/renesas/r7780rp/Kconfig | 24 -- arch/sh/boards/renesas/r7780rp/Makefile | 11 - arch/sh/boards/renesas/r7780rp/irq-r7780mp.c | 74 ---- arch/sh/boards/renesas/r7780rp/irq-r7780rp.c | 67 ---- arch/sh/boards/renesas/r7780rp/irq-r7785rp.c | 86 ----- arch/sh/boards/renesas/r7780rp/psw.c | 122 ------- arch/sh/boards/renesas/r7780rp/setup.c | 345 ------------------ arch/sh/boards/renesas/rsk7203/Makefile | 1 - arch/sh/boards/renesas/rsk7203/setup.c | 136 ------- arch/sh/boards/renesas/rts7751r2d/Kconfig | 23 -- arch/sh/boards/renesas/rts7751r2d/Makefile | 5 - arch/sh/boards/renesas/rts7751r2d/irq.c | 155 -------- arch/sh/boards/renesas/rts7751r2d/setup.c | 258 ------------- arch/sh/boards/renesas/sdk7780/Kconfig | 16 - arch/sh/boards/renesas/sdk7780/Makefile | 5 - arch/sh/boards/renesas/sdk7780/irq.c | 46 --- arch/sh/boards/renesas/sdk7780/setup.c | 109 ------ arch/sh/boards/renesas/sh7763rdp/Makefile | 1 - arch/sh/boards/renesas/sh7763rdp/irq.c | 45 --- arch/sh/boards/renesas/sh7763rdp/setup.c | 128 ------- arch/sh/boards/renesas/sh7785lcr/Makefile | 1 - arch/sh/boards/renesas/sh7785lcr/setup.c | 302 ---------------- arch/sh/boards/renesas/systemh/Makefile | 13 - arch/sh/boards/renesas/systemh/io.c | 174 --------- arch/sh/boards/renesas/systemh/irq.c | 102 ------ arch/sh/boards/renesas/systemh/setup.c | 57 --- arch/sh/boards/renesas/x3proto/Makefile | 1 - arch/sh/boards/renesas/x3proto/ilsel.c | 151 -------- arch/sh/boards/renesas/x3proto/setup.c | 136 ------- arch/sh/boards/se/7206/Makefile | 5 - arch/sh/boards/se/7206/io.c | 104 ------ arch/sh/boards/se/7206/irq.c | 146 -------- arch/sh/boards/se/7206/setup.c | 108 ------ arch/sh/boards/se/7343/Makefile | 5 - arch/sh/boards/se/7343/io.c | 273 -------------- arch/sh/boards/se/7343/irq.c | 80 ---- arch/sh/boards/se/7343/setup.c | 152 -------- arch/sh/boards/se/7619/Makefile | 5 - arch/sh/boards/se/7619/setup.c | 21 -- arch/sh/boards/se/770x/Makefile | 5 - arch/sh/boards/se/770x/io.c | 156 -------- arch/sh/boards/se/770x/irq.c | 108 ------ arch/sh/boards/se/770x/setup.c | 222 ------------ arch/sh/boards/se/7721/Makefile | 1 - arch/sh/boards/se/7721/irq.c | 45 --- arch/sh/boards/se/7721/setup.c | 99 ----- arch/sh/boards/se/7722/Makefile | 10 - arch/sh/boards/se/7722/irq.c | 76 ---- arch/sh/boards/se/7722/setup.c | 194 ---------- arch/sh/boards/se/7751/Makefile | 7 - arch/sh/boards/se/7751/io.c | 135 ------- arch/sh/boards/se/7751/irq.c | 50 --- arch/sh/boards/se/7751/pci.c | 147 -------- arch/sh/boards/se/7751/setup.c | 78 ---- arch/sh/boards/se/7780/Makefile | 10 - arch/sh/boards/se/7780/irq.c | 46 --- arch/sh/boards/se/7780/setup.c | 124 ------- arch/sh/boards/sh03/Makefile | 5 - arch/sh/boards/sh03/rtc.c | 132 ------- arch/sh/boards/sh03/setup.c | 75 ---- arch/sh/boards/shmin/Makefile | 5 - arch/sh/boards/shmin/setup.c | 42 --- arch/sh/boards/snapgear/Makefile | 5 - arch/sh/boards/snapgear/io.c | 137 ------- arch/sh/boards/snapgear/setup.c | 95 ----- arch/sh/boards/superh/microdev/Makefile | 8 - arch/sh/boards/superh/microdev/io.c | 367 ------------------- arch/sh/boards/superh/microdev/irq.c | 183 ---------- arch/sh/boards/superh/microdev/led.c | 101 ------ arch/sh/boards/superh/microdev/setup.c | 405 --------------------- arch/sh/boards/titan/Makefile | 5 - arch/sh/boards/titan/io.c | 126 ------- arch/sh/boards/titan/setup.c | 44 --- 214 files changed, 10072 insertions(+), 10072 deletions(-) delete mode 100644 arch/sh/boards/cayman/Makefile delete mode 100644 arch/sh/boards/cayman/irq.c delete mode 100644 arch/sh/boards/cayman/led.c delete mode 100644 arch/sh/boards/cayman/setup.c delete mode 100644 arch/sh/boards/dreamcast/Makefile delete mode 100644 arch/sh/boards/dreamcast/irq.c delete mode 100644 arch/sh/boards/dreamcast/rtc.c delete mode 100644 arch/sh/boards/dreamcast/setup.c delete mode 100644 arch/sh/boards/hp6xx/Makefile delete mode 100644 arch/sh/boards/hp6xx/hp6xx_apm.c delete mode 100644 arch/sh/boards/hp6xx/pm.c delete mode 100644 arch/sh/boards/hp6xx/pm_wakeup.S delete mode 100644 arch/sh/boards/hp6xx/setup.c delete mode 100644 arch/sh/boards/landisk/Makefile delete mode 100644 arch/sh/boards/landisk/gio.c delete mode 100644 arch/sh/boards/landisk/irq.c delete mode 100644 arch/sh/boards/landisk/psw.c delete mode 100644 arch/sh/boards/landisk/setup.c delete mode 100644 arch/sh/boards/lboxre2/Makefile delete mode 100644 arch/sh/boards/lboxre2/irq.c delete mode 100644 arch/sh/boards/lboxre2/setup.c create mode 100644 arch/sh/boards/mach-ap325rxa/Makefile create mode 100644 arch/sh/boards/mach-ap325rxa/setup.c create mode 100644 arch/sh/boards/mach-cayman/Makefile create mode 100644 arch/sh/boards/mach-cayman/irq.c create mode 100644 arch/sh/boards/mach-cayman/led.c create mode 100644 arch/sh/boards/mach-cayman/setup.c create mode 100644 arch/sh/boards/mach-dreamcast/Makefile create mode 100644 arch/sh/boards/mach-dreamcast/irq.c create mode 100644 arch/sh/boards/mach-dreamcast/rtc.c create mode 100644 arch/sh/boards/mach-dreamcast/setup.c create mode 100644 arch/sh/boards/mach-edosk7705/Makefile create mode 100644 arch/sh/boards/mach-edosk7705/io.c create mode 100644 arch/sh/boards/mach-edosk7705/setup.c create mode 100644 arch/sh/boards/mach-highlander/Kconfig create mode 100644 arch/sh/boards/mach-highlander/Makefile create mode 100644 arch/sh/boards/mach-highlander/irq-r7780mp.c create mode 100644 arch/sh/boards/mach-highlander/irq-r7780rp.c create mode 100644 arch/sh/boards/mach-highlander/irq-r7785rp.c create mode 100644 arch/sh/boards/mach-highlander/psw.c create mode 100644 arch/sh/boards/mach-highlander/setup.c create mode 100644 arch/sh/boards/mach-hp6xx/Makefile create mode 100644 arch/sh/boards/mach-hp6xx/hp6xx_apm.c create mode 100644 arch/sh/boards/mach-hp6xx/pm.c create mode 100644 arch/sh/boards/mach-hp6xx/pm_wakeup.S create mode 100644 arch/sh/boards/mach-hp6xx/setup.c create mode 100644 arch/sh/boards/mach-landisk/Makefile create mode 100644 arch/sh/boards/mach-landisk/gio.c create mode 100644 arch/sh/boards/mach-landisk/irq.c create mode 100644 arch/sh/boards/mach-landisk/psw.c create mode 100644 arch/sh/boards/mach-landisk/setup.c create mode 100644 arch/sh/boards/mach-lboxre2/Makefile create mode 100644 arch/sh/boards/mach-lboxre2/irq.c create mode 100644 arch/sh/boards/mach-lboxre2/setup.c create mode 100644 arch/sh/boards/mach-magicpanelr2/Kconfig create mode 100644 arch/sh/boards/mach-magicpanelr2/Makefile create mode 100644 arch/sh/boards/mach-magicpanelr2/setup.c create mode 100644 arch/sh/boards/mach-microdev/Makefile create mode 100644 arch/sh/boards/mach-microdev/io.c create mode 100644 arch/sh/boards/mach-microdev/irq.c create mode 100644 arch/sh/boards/mach-microdev/led.c create mode 100644 arch/sh/boards/mach-microdev/setup.c create mode 100644 arch/sh/boards/mach-migor/Kconfig create mode 100644 arch/sh/boards/mach-migor/Makefile create mode 100644 arch/sh/boards/mach-migor/lcd_qvga.c create mode 100644 arch/sh/boards/mach-migor/setup.c create mode 100644 arch/sh/boards/mach-r2d/Kconfig create mode 100644 arch/sh/boards/mach-r2d/Makefile create mode 100644 arch/sh/boards/mach-r2d/irq.c create mode 100644 arch/sh/boards/mach-r2d/setup.c create mode 100644 arch/sh/boards/mach-rsk7203/Makefile create mode 100644 arch/sh/boards/mach-rsk7203/setup.c create mode 100644 arch/sh/boards/mach-sdk7780/Kconfig create mode 100644 arch/sh/boards/mach-sdk7780/Makefile create mode 100644 arch/sh/boards/mach-sdk7780/irq.c create mode 100644 arch/sh/boards/mach-sdk7780/setup.c create mode 100644 arch/sh/boards/mach-se/7206/Makefile create mode 100644 arch/sh/boards/mach-se/7206/io.c create mode 100644 arch/sh/boards/mach-se/7206/irq.c create mode 100644 arch/sh/boards/mach-se/7206/setup.c create mode 100644 arch/sh/boards/mach-se/7343/Makefile create mode 100644 arch/sh/boards/mach-se/7343/io.c create mode 100644 arch/sh/boards/mach-se/7343/irq.c create mode 100644 arch/sh/boards/mach-se/7343/setup.c create mode 100644 arch/sh/boards/mach-se/7619/Makefile create mode 100644 arch/sh/boards/mach-se/7619/setup.c create mode 100644 arch/sh/boards/mach-se/770x/Makefile create mode 100644 arch/sh/boards/mach-se/770x/io.c create mode 100644 arch/sh/boards/mach-se/770x/irq.c create mode 100644 arch/sh/boards/mach-se/770x/setup.c create mode 100644 arch/sh/boards/mach-se/7721/Makefile create mode 100644 arch/sh/boards/mach-se/7721/irq.c create mode 100644 arch/sh/boards/mach-se/7721/setup.c create mode 100644 arch/sh/boards/mach-se/7722/Makefile create mode 100644 arch/sh/boards/mach-se/7722/irq.c create mode 100644 arch/sh/boards/mach-se/7722/setup.c create mode 100644 arch/sh/boards/mach-se/7751/Makefile create mode 100644 arch/sh/boards/mach-se/7751/io.c create mode 100644 arch/sh/boards/mach-se/7751/irq.c create mode 100644 arch/sh/boards/mach-se/7751/pci.c create mode 100644 arch/sh/boards/mach-se/7751/setup.c create mode 100644 arch/sh/boards/mach-se/7780/Makefile create mode 100644 arch/sh/boards/mach-se/7780/irq.c create mode 100644 arch/sh/boards/mach-se/7780/setup.c create mode 100644 arch/sh/boards/mach-sh03/Makefile create mode 100644 arch/sh/boards/mach-sh03/rtc.c create mode 100644 arch/sh/boards/mach-sh03/setup.c create mode 100644 arch/sh/boards/mach-sh7763rdp/Makefile create mode 100644 arch/sh/boards/mach-sh7763rdp/irq.c create mode 100644 arch/sh/boards/mach-sh7763rdp/setup.c create mode 100644 arch/sh/boards/mach-sh7785lcr/Makefile create mode 100644 arch/sh/boards/mach-sh7785lcr/setup.c create mode 100644 arch/sh/boards/mach-shmin/Makefile create mode 100644 arch/sh/boards/mach-shmin/setup.c create mode 100644 arch/sh/boards/mach-snapgear/Makefile create mode 100644 arch/sh/boards/mach-snapgear/io.c create mode 100644 arch/sh/boards/mach-snapgear/setup.c create mode 100644 arch/sh/boards/mach-systemh/Makefile create mode 100644 arch/sh/boards/mach-systemh/io.c create mode 100644 arch/sh/boards/mach-systemh/irq.c create mode 100644 arch/sh/boards/mach-systemh/setup.c create mode 100644 arch/sh/boards/mach-titan/Makefile create mode 100644 arch/sh/boards/mach-titan/io.c create mode 100644 arch/sh/boards/mach-titan/setup.c create mode 100644 arch/sh/boards/mach-x3proto/Makefile create mode 100644 arch/sh/boards/mach-x3proto/ilsel.c create mode 100644 arch/sh/boards/mach-x3proto/setup.c delete mode 100644 arch/sh/boards/magicpanelr2/Kconfig delete mode 100644 arch/sh/boards/magicpanelr2/Makefile delete mode 100644 arch/sh/boards/magicpanelr2/setup.c delete mode 100644 arch/sh/boards/renesas/ap325rxa/Makefile delete mode 100644 arch/sh/boards/renesas/ap325rxa/setup.c delete mode 100644 arch/sh/boards/renesas/edosk7705/Makefile delete mode 100644 arch/sh/boards/renesas/edosk7705/io.c delete mode 100644 arch/sh/boards/renesas/edosk7705/setup.c delete mode 100644 arch/sh/boards/renesas/migor/Kconfig delete mode 100644 arch/sh/boards/renesas/migor/Makefile delete mode 100644 arch/sh/boards/renesas/migor/lcd_qvga.c delete mode 100644 arch/sh/boards/renesas/migor/setup.c delete mode 100644 arch/sh/boards/renesas/r7780rp/Kconfig delete mode 100644 arch/sh/boards/renesas/r7780rp/Makefile delete mode 100644 arch/sh/boards/renesas/r7780rp/irq-r7780mp.c delete mode 100644 arch/sh/boards/renesas/r7780rp/irq-r7780rp.c delete mode 100644 arch/sh/boards/renesas/r7780rp/irq-r7785rp.c delete mode 100644 arch/sh/boards/renesas/r7780rp/psw.c delete mode 100644 arch/sh/boards/renesas/r7780rp/setup.c delete mode 100644 arch/sh/boards/renesas/rsk7203/Makefile delete mode 100644 arch/sh/boards/renesas/rsk7203/setup.c delete mode 100644 arch/sh/boards/renesas/rts7751r2d/Kconfig delete mode 100644 arch/sh/boards/renesas/rts7751r2d/Makefile delete mode 100644 arch/sh/boards/renesas/rts7751r2d/irq.c delete mode 100644 arch/sh/boards/renesas/rts7751r2d/setup.c delete mode 100644 arch/sh/boards/renesas/sdk7780/Kconfig delete mode 100644 arch/sh/boards/renesas/sdk7780/Makefile delete mode 100644 arch/sh/boards/renesas/sdk7780/irq.c delete mode 100644 arch/sh/boards/renesas/sdk7780/setup.c delete mode 100644 arch/sh/boards/renesas/sh7763rdp/Makefile delete mode 100644 arch/sh/boards/renesas/sh7763rdp/irq.c delete mode 100644 arch/sh/boards/renesas/sh7763rdp/setup.c delete mode 100644 arch/sh/boards/renesas/sh7785lcr/Makefile delete mode 100644 arch/sh/boards/renesas/sh7785lcr/setup.c delete mode 100644 arch/sh/boards/renesas/systemh/Makefile delete mode 100644 arch/sh/boards/renesas/systemh/io.c delete mode 100644 arch/sh/boards/renesas/systemh/irq.c delete mode 100644 arch/sh/boards/renesas/systemh/setup.c delete mode 100644 arch/sh/boards/renesas/x3proto/Makefile delete mode 100644 arch/sh/boards/renesas/x3proto/ilsel.c delete mode 100644 arch/sh/boards/renesas/x3proto/setup.c delete mode 100644 arch/sh/boards/se/7206/Makefile delete mode 100644 arch/sh/boards/se/7206/io.c delete mode 100644 arch/sh/boards/se/7206/irq.c delete mode 100644 arch/sh/boards/se/7206/setup.c delete mode 100644 arch/sh/boards/se/7343/Makefile delete mode 100644 arch/sh/boards/se/7343/io.c delete mode 100644 arch/sh/boards/se/7343/irq.c delete mode 100644 arch/sh/boards/se/7343/setup.c delete mode 100644 arch/sh/boards/se/7619/Makefile delete mode 100644 arch/sh/boards/se/7619/setup.c delete mode 100644 arch/sh/boards/se/770x/Makefile delete mode 100644 arch/sh/boards/se/770x/io.c delete mode 100644 arch/sh/boards/se/770x/irq.c delete mode 100644 arch/sh/boards/se/770x/setup.c delete mode 100644 arch/sh/boards/se/7721/Makefile delete mode 100644 arch/sh/boards/se/7721/irq.c delete mode 100644 arch/sh/boards/se/7721/setup.c delete mode 100644 arch/sh/boards/se/7722/Makefile delete mode 100644 arch/sh/boards/se/7722/irq.c delete mode 100644 arch/sh/boards/se/7722/setup.c delete mode 100644 arch/sh/boards/se/7751/Makefile delete mode 100644 arch/sh/boards/se/7751/io.c delete mode 100644 arch/sh/boards/se/7751/irq.c delete mode 100644 arch/sh/boards/se/7751/pci.c delete mode 100644 arch/sh/boards/se/7751/setup.c delete mode 100644 arch/sh/boards/se/7780/Makefile delete mode 100644 arch/sh/boards/se/7780/irq.c delete mode 100644 arch/sh/boards/se/7780/setup.c delete mode 100644 arch/sh/boards/sh03/Makefile delete mode 100644 arch/sh/boards/sh03/rtc.c delete mode 100644 arch/sh/boards/sh03/setup.c delete mode 100644 arch/sh/boards/shmin/Makefile delete mode 100644 arch/sh/boards/shmin/setup.c delete mode 100644 arch/sh/boards/snapgear/Makefile delete mode 100644 arch/sh/boards/snapgear/io.c delete mode 100644 arch/sh/boards/snapgear/setup.c delete mode 100644 arch/sh/boards/superh/microdev/Makefile delete mode 100644 arch/sh/boards/superh/microdev/io.c delete mode 100644 arch/sh/boards/superh/microdev/irq.c delete mode 100644 arch/sh/boards/superh/microdev/led.c delete mode 100644 arch/sh/boards/superh/microdev/setup.c delete mode 100644 arch/sh/boards/titan/Makefile delete mode 100644 arch/sh/boards/titan/io.c delete mode 100644 arch/sh/boards/titan/setup.c (limited to 'arch/sh/boards') diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig index 81eaa4b72f4..83d170ccb0f 100644 --- a/arch/sh/Kconfig +++ b/arch/sh/Kconfig @@ -594,11 +594,11 @@ config SH_CAYMAN endmenu -source "arch/sh/boards/renesas/rts7751r2d/Kconfig" -source "arch/sh/boards/renesas/r7780rp/Kconfig" -source "arch/sh/boards/renesas/sdk7780/Kconfig" -source "arch/sh/boards/renesas/migor/Kconfig" -source "arch/sh/boards/magicpanelr2/Kconfig" +source "arch/sh/boards/mach-r2d/Kconfig" +source "arch/sh/boards/mach-highlander/Kconfig" +source "arch/sh/boards/mach-sdk7780/Kconfig" +source "arch/sh/boards/mach-migor/Kconfig" +source "arch/sh/boards/mach-magicpanelr2/Kconfig" menu "Timer and clock configuration" diff --git a/arch/sh/Makefile b/arch/sh/Makefile index f2b07b54c91..47bbfd8ae66 100644 --- a/arch/sh/Makefile +++ b/arch/sh/Makefile @@ -102,36 +102,36 @@ core-y += arch/sh/kernel/ arch/sh/mm/ core-$(CONFIG_SH_FPU_EMU) += arch/sh/math-emu/ # Boards -machdir-$(CONFIG_SH_SOLUTION_ENGINE) += se/770x -machdir-$(CONFIG_SH_7722_SOLUTION_ENGINE) += se/7722 -machdir-$(CONFIG_SH_7751_SOLUTION_ENGINE) += se/7751 -machdir-$(CONFIG_SH_7780_SOLUTION_ENGINE) += se/7780 -machdir-$(CONFIG_SH_7343_SOLUTION_ENGINE) += se/7343 -machdir-$(CONFIG_SH_7721_SOLUTION_ENGINE) += se/7721 -machdir-$(CONFIG_SH_HP6XX) += hp6xx -machdir-$(CONFIG_SH_DREAMCAST) += dreamcast -machdir-$(CONFIG_SH_SH03) += sh03 -machdir-$(CONFIG_SH_SECUREEDGE5410) += snapgear -machdir-$(CONFIG_SH_RTS7751R2D) += renesas/rts7751r2d -machdir-$(CONFIG_SH_7751_SYSTEMH) += renesas/systemh -machdir-$(CONFIG_SH_EDOSK7705) += renesas/edosk7705 -machdir-$(CONFIG_SH_HIGHLANDER) += renesas/r7780rp -machdir-$(CONFIG_SH_MIGOR) += renesas/migor -machdir-$(CONFIG_SH_SDK7780) += renesas/sdk7780 -machdir-$(CONFIG_SH_X3PROTO) += renesas/x3proto -machdir-$(CONFIG_SH_RSK7203) += renesas/rsk7203 -machdir-$(CONFIG_SH_AP325RXA) += renesas/ap325rxa -machdir-$(CONFIG_SH_SH7763RDP) += renesas/sh7763rdp -machdir-$(CONFIG_SH_SH7785LCR) += renesas/sh7785lcr -machdir-$(CONFIG_SH_SH4202_MICRODEV) += superh/microdev -machdir-$(CONFIG_SH_LANDISK) += landisk -machdir-$(CONFIG_SH_TITAN) += titan -machdir-$(CONFIG_SH_SHMIN) += shmin -machdir-$(CONFIG_SH_7206_SOLUTION_ENGINE) += se/7206 -machdir-$(CONFIG_SH_7619_SOLUTION_ENGINE) += se/7619 -machdir-$(CONFIG_SH_LBOX_RE2) += lboxre2 -machdir-$(CONFIG_SH_MAGIC_PANEL_R2) += magicpanelr2 -machdir-$(CONFIG_SH_CAYMAN) += cayman +machdir-$(CONFIG_SH_SOLUTION_ENGINE) += mach-se/770x +machdir-$(CONFIG_SH_7206_SOLUTION_ENGINE) += mach-se/7206 +machdir-$(CONFIG_SH_7619_SOLUTION_ENGINE) += mach-se/7619 +machdir-$(CONFIG_SH_7722_SOLUTION_ENGINE) += mach-se/7722 +machdir-$(CONFIG_SH_7751_SOLUTION_ENGINE) += mach-se/7751 +machdir-$(CONFIG_SH_7780_SOLUTION_ENGINE) += mach-se/7780 +machdir-$(CONFIG_SH_7343_SOLUTION_ENGINE) += mach-se/7343 +machdir-$(CONFIG_SH_7721_SOLUTION_ENGINE) += mach-se/7721 +machdir-$(CONFIG_SH_HP6XX) += mach-hp6xx +machdir-$(CONFIG_SH_DREAMCAST) += mach-dreamcast +machdir-$(CONFIG_SH_SH03) += mach-sh03 +machdir-$(CONFIG_SH_SECUREEDGE5410) += mach-snapgear +machdir-$(CONFIG_SH_RTS7751R2D) += mach-r2d +machdir-$(CONFIG_SH_7751_SYSTEMH) += mach-systemh +machdir-$(CONFIG_SH_EDOSK7705) += mach-edosk7705 +machdir-$(CONFIG_SH_HIGHLANDER) += mach-highlander +machdir-$(CONFIG_SH_MIGOR) += mach-migor +machdir-$(CONFIG_SH_SDK7780) += mach-sdk7780 +machdir-$(CONFIG_SH_X3PROTO) += mach-x3proto +machdir-$(CONFIG_SH_RSK7203) += mach-rsk7203 +machdir-$(CONFIG_SH_AP325RXA) += mach-ap325rxa +machdir-$(CONFIG_SH_SH7763RDP) += mach-sh7763rdp +machdir-$(CONFIG_SH_SH7785LCR) += mach-sh7785lcr +machdir-$(CONFIG_SH_SH4202_MICRODEV) += mach-microdev +machdir-$(CONFIG_SH_LANDISK) += mach-landisk +machdir-$(CONFIG_SH_TITAN) += mach-titan +machdir-$(CONFIG_SH_SHMIN) += mach-shmin +machdir-$(CONFIG_SH_LBOX_RE2) += mach-lboxre2 +machdir-$(CONFIG_SH_MAGIC_PANEL_R2) += mach-magicpanelr2 +machdir-$(CONFIG_SH_CAYMAN) += mach-cayman incdir-y := $(notdir $(machdir-y)) diff --git a/arch/sh/boards/cayman/Makefile b/arch/sh/boards/cayman/Makefile deleted file mode 100644 index 489a8f86736..00000000000 --- a/arch/sh/boards/cayman/Makefile +++ /dev/null @@ -1,5 +0,0 @@ -# -# Makefile for the Hitachi Cayman specific parts of the kernel -# -obj-y := setup.o irq.o -obj-$(CONFIG_HEARTBEAT) += led.o diff --git a/arch/sh/boards/cayman/irq.c b/arch/sh/boards/cayman/irq.c deleted file mode 100644 index ceb37ae92c7..00000000000 --- a/arch/sh/boards/cayman/irq.c +++ /dev/null @@ -1,197 +0,0 @@ -/* - * arch/sh/mach-cayman/irq.c - SH-5 Cayman Interrupt Support - * - * This file handles the board specific parts of the Cayman interrupt system - * - * Copyright (C) 2002 Stuart Menefy - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ -#include -#include -#include -#include -#include -#include - -/* Setup for the SMSC FDC37C935 / LAN91C100FD */ -#define SMSC_IRQ IRQ_IRL1 - -/* Setup for PCI Bus 2, which transmits interrupts via the EPLD */ -#define PCI2_IRQ IRQ_IRL3 - -unsigned long epld_virt; - -#define EPLD_BASE 0x04002000 -#define EPLD_STATUS_BASE (epld_virt + 0x10) -#define EPLD_MASK_BASE (epld_virt + 0x20) - -/* Note the SMSC SuperIO chip and SMSC LAN chip interrupts are all muxed onto - the same SH-5 interrupt */ - -static irqreturn_t cayman_interrupt_smsc(int irq, void *dev_id) -{ - printk(KERN_INFO "CAYMAN: spurious SMSC interrupt\n"); - return IRQ_NONE; -} - -static irqreturn_t cayman_interrupt_pci2(int irq, void *dev_id) -{ - printk(KERN_INFO "CAYMAN: spurious PCI interrupt, IRQ %d\n", irq); - return IRQ_NONE; -} - -static struct irqaction cayman_action_smsc = { - .name = "Cayman SMSC Mux", - .handler = cayman_interrupt_smsc, - .flags = IRQF_DISABLED, -}; - -static struct irqaction cayman_action_pci2 = { - .name = "Cayman PCI2 Mux", - .handler = cayman_interrupt_pci2, - .flags = IRQF_DISABLED, -}; - -static void enable_cayman_irq(unsigned int irq) -{ - unsigned long flags; - unsigned long mask; - unsigned int reg; - unsigned char bit; - - irq -= START_EXT_IRQS; - reg = EPLD_MASK_BASE + ((irq / 8) << 2); - bit = 1<<(irq % 8); - local_irq_save(flags); - mask = ctrl_inl(reg); - mask |= bit; - ctrl_outl(mask, reg); - local_irq_restore(flags); -} - -void disable_cayman_irq(unsigned int irq) -{ - unsigned long flags; - unsigned long mask; - unsigned int reg; - unsigned char bit; - - irq -= START_EXT_IRQS; - reg = EPLD_MASK_BASE + ((irq / 8) << 2); - bit = 1<<(irq % 8); - local_irq_save(flags); - mask = ctrl_inl(reg); - mask &= ~bit; - ctrl_outl(mask, reg); - local_irq_restore(flags); -} - -static void ack_cayman_irq(unsigned int irq) -{ - disable_cayman_irq(irq); -} - -static void end_cayman_irq(unsigned int irq) -{ - if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS))) - enable_cayman_irq(irq); -} - -static unsigned int startup_cayman_irq(unsigned int irq) -{ - enable_cayman_irq(irq); - return 0; /* never anything pending */ -} - -static void shutdown_cayman_irq(unsigned int irq) -{ - disable_cayman_irq(irq); -} - -struct hw_interrupt_type cayman_irq_type = { - .typename = "Cayman-IRQ", - .startup = startup_cayman_irq, - .shutdown = shutdown_cayman_irq, - .enable = enable_cayman_irq, - .disable = disable_cayman_irq, - .ack = ack_cayman_irq, - .end = end_cayman_irq, -}; - -int cayman_irq_demux(int evt) -{ - int irq = intc_evt_to_irq[evt]; - - if (irq == SMSC_IRQ) { - unsigned long status; - int i; - - status = ctrl_inl(EPLD_STATUS_BASE) & - ctrl_inl(EPLD_MASK_BASE) & 0xff; - if (status == 0) { - irq = -1; - } else { - for (i=0; i<8; i++) { - if (status & (1<= NR_INTC_IRQS + 24) && (irq < NR_INTC_IRQS + 32)) { - return sprintf(p, "(PCI2 %d)", irq - (NR_INTC_IRQS + 24)); - } - - return 0; -} -#endif - -void init_cayman_irq(void) -{ - int i; - - epld_virt = onchip_remap(EPLD_BASE, 1024, "EPLD"); - if (!epld_virt) { - printk(KERN_ERR "Cayman IRQ: Unable to remap EPLD\n"); - return; - } - - for (i=0; i - * - * May be copied or modified under the terms of the GNU General Public - * License. See linux/COPYING for more information. - * - * Flash the LEDs - */ -#include - -/* -** It is supposed these functions to be used for a low level -** debugging (via Cayman LEDs), hence to be available as soon -** as possible. -** Unfortunately Cayman LEDs relies on Cayman EPLD to be mapped -** (this happen when IRQ are initialized... quite late). -** These triky dependencies should be removed. Temporary, it -** may be enough to NOP until EPLD is mapped. -*/ - -extern unsigned long epld_virt; - -#define LED_ADDR (epld_virt + 0x008) -#define HDSP2534_ADDR (epld_virt + 0x100) - -void mach_led(int position, int value) -{ - if (!epld_virt) - return; - - if (value) - ctrl_outl(0, LED_ADDR); - else - ctrl_outl(1, LED_ADDR); - -} - -void mach_alphanum(int position, unsigned char value) -{ - if (!epld_virt) - return; - - ctrl_outb(value, HDSP2534_ADDR + 0xe0 + (position << 2)); -} - -void mach_alphanum_brightness(int setting) -{ - ctrl_outb(setting & 7, HDSP2534_ADDR + 0xc0); -} diff --git a/arch/sh/boards/cayman/setup.c b/arch/sh/boards/cayman/setup.c deleted file mode 100644 index e7f9cc5f2ff..00000000000 --- a/arch/sh/boards/cayman/setup.c +++ /dev/null @@ -1,187 +0,0 @@ -/* - * arch/sh/mach-cayman/setup.c - * - * SH5 Cayman support - * - * Copyright (C) 2002 David J. Mckay & Benedict Gaster - * Copyright (C) 2003 - 2007 Paul Mundt - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ -#include -#include -#include -#include - -/* - * Platform Dependent Interrupt Priorities. - */ - -/* Using defaults defined in irq.h */ -#define RES NO_PRIORITY /* Disabled */ -#define IR0 IRL0_PRIORITY /* IRLs */ -#define IR1 IRL1_PRIORITY -#define IR2 IRL2_PRIORITY -#define IR3 IRL3_PRIORITY -#define PCA INTA_PRIORITY /* PCI Ints */ -#define PCB INTB_PRIORITY -#define PCC INTC_PRIORITY -#define PCD INTD_PRIORITY -#define SER TOP_PRIORITY -#define ERR TOP_PRIORITY -#define PW0 TOP_PRIORITY -#define PW1 TOP_PRIORITY -#define PW2 TOP_PRIORITY -#define PW3 TOP_PRIORITY -#define DM0 NO_PRIORITY /* DMA Ints */ -#define DM1 NO_PRIORITY -#define DM2 NO_PRIORITY -#define DM3 NO_PRIORITY -#define DAE NO_PRIORITY -#define TU0 TIMER_PRIORITY /* TMU Ints */ -#define TU1 NO_PRIORITY -#define TU2 NO_PRIORITY -#define TI2 NO_PRIORITY -#define ATI NO_PRIORITY /* RTC Ints */ -#define PRI NO_PRIORITY -#define CUI RTC_PRIORITY -#define ERI SCIF_PRIORITY /* SCIF Ints */ -#define RXI SCIF_PRIORITY -#define BRI SCIF_PRIORITY -#define TXI SCIF_PRIORITY -#define ITI TOP_PRIORITY /* WDT Ints */ - -/* Setup for the SMSC FDC37C935 */ -#define SMSC_SUPERIO_BASE 0x04000000 -#define SMSC_CONFIG_PORT_ADDR 0x3f0 -#define SMSC_INDEX_PORT_ADDR SMSC_CONFIG_PORT_ADDR -#define SMSC_DATA_PORT_ADDR 0x3f1 - -#define SMSC_ENTER_CONFIG_KEY 0x55 -#define SMSC_EXIT_CONFIG_KEY 0xaa - -#define SMCS_LOGICAL_DEV_INDEX 0x07 -#define SMSC_DEVICE_ID_INDEX 0x20 -#define SMSC_DEVICE_REV_INDEX 0x21 -#define SMSC_ACTIVATE_INDEX 0x30 -#define SMSC_PRIMARY_BASE_INDEX 0x60 -#define SMSC_SECONDARY_BASE_INDEX 0x62 -#define SMSC_PRIMARY_INT_INDEX 0x70 -#define SMSC_SECONDARY_INT_INDEX 0x72 - -#define SMSC_IDE1_DEVICE 1 -#define SMSC_KEYBOARD_DEVICE 7 -#define SMSC_CONFIG_REGISTERS 8 - -#define SMSC_SUPERIO_READ_INDEXED(index) ({ \ - outb((index), SMSC_INDEX_PORT_ADDR); \ - inb(SMSC_DATA_PORT_ADDR); }) -#define SMSC_SUPERIO_WRITE_INDEXED(val, index) ({ \ - outb((index), SMSC_INDEX_PORT_ADDR); \ - outb((val), SMSC_DATA_PORT_ADDR); }) - -#define IDE1_PRIMARY_BASE 0x01f0 -#define IDE1_SECONDARY_BASE 0x03f6 - -unsigned long smsc_superio_virt; - -int platform_int_priority[NR_INTC_IRQS] = { - IR0, IR1, IR2, IR3, PCA, PCB, PCC, PCD, /* IRQ 0- 7 */ - RES, RES, RES, RES, SER, ERR, PW3, PW2, /* IRQ 8-15 */ - PW1, PW0, DM0, DM1, DM2, DM3, DAE, RES, /* IRQ 16-23 */ - RES, RES, RES, RES, RES, RES, RES, RES, /* IRQ 24-31 */ - TU0, TU1, TU2, TI2, ATI, PRI, CUI, ERI, /* IRQ 32-39 */ - RXI, BRI, TXI, RES, RES, RES, RES, RES, /* IRQ 40-47 */ - RES, RES, RES, RES, RES, RES, RES, RES, /* IRQ 48-55 */ - RES, RES, RES, RES, RES, RES, RES, ITI, /* IRQ 56-63 */ -}; - -static int __init smsc_superio_setup(void) -{ - unsigned char devid, devrev; - - smsc_superio_virt = onchip_remap(SMSC_SUPERIO_BASE, 1024, "SMSC SuperIO"); - if (!smsc_superio_virt) { - panic("Unable to remap SMSC SuperIO\n"); - } - - /* Initially the chip is in run state */ - /* Put it into configuration state */ - outb(SMSC_ENTER_CONFIG_KEY, SMSC_CONFIG_PORT_ADDR); - outb(SMSC_ENTER_CONFIG_KEY, SMSC_CONFIG_PORT_ADDR); - - /* Read device ID info */ - devid = SMSC_SUPERIO_READ_INDEXED(SMSC_DEVICE_ID_INDEX); - devrev = SMSC_SUPERIO_READ_INDEXED(SMSC_DEVICE_REV_INDEX); - printk("SMSC SuperIO devid %02x rev %02x\n", devid, devrev); - - /* Select the keyboard device */ - SMSC_SUPERIO_WRITE_INDEXED(SMSC_KEYBOARD_DEVICE, SMCS_LOGICAL_DEV_INDEX); - - /* enable it */ - SMSC_SUPERIO_WRITE_INDEXED(1, SMSC_ACTIVATE_INDEX); - - /* Select the interrupts */ - /* On a PC keyboard is IRQ1, mouse is IRQ12 */ - SMSC_SUPERIO_WRITE_INDEXED(1, SMSC_PRIMARY_INT_INDEX); - SMSC_SUPERIO_WRITE_INDEXED(12, SMSC_SECONDARY_INT_INDEX); - -#ifdef CONFIG_IDE - /* - * Only IDE1 exists on the Cayman - */ - - /* Power it on */ - SMSC_SUPERIO_WRITE_INDEXED(1 << SMSC_IDE1_DEVICE, 0x22); - - SMSC_SUPERIO_WRITE_INDEXED(SMSC_IDE1_DEVICE, SMCS_LOGICAL_DEV_INDEX); - SMSC_SUPERIO_WRITE_INDEXED(1, SMSC_ACTIVATE_INDEX); - - SMSC_SUPERIO_WRITE_INDEXED(IDE1_PRIMARY_BASE >> 8, - SMSC_PRIMARY_BASE_INDEX + 0); - SMSC_SUPERIO_WRITE_INDEXED(IDE1_PRIMARY_BASE & 0xff, - SMSC_PRIMARY_BASE_INDEX + 1); - - SMSC_SUPERIO_WRITE_INDEXED(IDE1_SECONDARY_BASE >> 8, - SMSC_SECONDARY_BASE_INDEX + 0); - SMSC_SUPERIO_WRITE_INDEXED(IDE1_SECONDARY_BASE & 0xff, - SMSC_SECONDARY_BASE_INDEX + 1); - - SMSC_SUPERIO_WRITE_INDEXED(14, SMSC_PRIMARY_INT_INDEX); - - SMSC_SUPERIO_WRITE_INDEXED(SMSC_CONFIG_REGISTERS, - SMCS_LOGICAL_DEV_INDEX); - - SMSC_SUPERIO_WRITE_INDEXED(0x00, 0xc2); /* GP42 = nIDE1_OE */ - SMSC_SUPERIO_WRITE_INDEXED(0x01, 0xc5); /* GP45 = IDE1_IRQ */ - SMSC_SUPERIO_WRITE_INDEXED(0x00, 0xc6); /* GP46 = nIOROP */ - SMSC_SUPERIO_WRITE_INDEXED(0x00, 0xc7); /* GP47 = nIOWOP */ -#endif - - /* Exit the configuration state */ - outb(SMSC_EXIT_CONFIG_KEY, SMSC_CONFIG_PORT_ADDR); - - return 0; -} -__initcall(smsc_superio_setup); - -static void __iomem *cayman_ioport_map(unsigned long port, unsigned int len) -{ - if (port < 0x400) { - extern unsigned long smsc_superio_virt; - return (void __iomem *)((port << 2) | smsc_superio_virt); - } - - return (void __iomem *)port; -} - -extern void init_cayman_irq(void); - -static struct sh_machine_vector mv_cayman __initmv = { - .mv_name = "Hitachi Cayman", - .mv_nr_irqs = 64, - .mv_ioport_map = cayman_ioport_map, - .mv_init_irq = init_cayman_irq, -}; diff --git a/arch/sh/boards/dreamcast/Makefile b/arch/sh/boards/dreamcast/Makefile deleted file mode 100644 index 7b97546c7e5..00000000000 --- a/arch/sh/boards/dreamcast/Makefile +++ /dev/null @@ -1,6 +0,0 @@ -# -# Makefile for the Sega Dreamcast specific parts of the kernel -# - -obj-y := setup.o irq.o rtc.o - diff --git a/arch/sh/boards/dreamcast/irq.c b/arch/sh/boards/dreamcast/irq.c deleted file mode 100644 index 67bdc33dd41..00000000000 --- a/arch/sh/boards/dreamcast/irq.c +++ /dev/null @@ -1,153 +0,0 @@ -/* - * arch/sh/boards/dreamcast/irq.c - * - * Holly IRQ support for the Sega Dreamcast. - * - * Copyright (c) 2001, 2002 M. R. Brown - * - * This file is part of the LinuxDC project (www.linuxdc.org) - * Released under the terms of the GNU GPL v2.0 - */ - -#include -#include -#include -#include - -/* Dreamcast System ASIC Hardware Events - - - The Dreamcast's System ASIC (a.k.a. Holly) is responsible for receiving - hardware events from system peripherals and triggering an SH7750 IRQ. - Hardware events can trigger IRQs 13, 11, or 9 depending on which bits are - set in the Event Mask Registers (EMRs). When a hardware event is - triggered, it's corresponding bit in the Event Status Registers (ESRs) - is set, and that bit should be rewritten to the ESR to acknowledge that - event. - - There are three 32-bit ESRs located at 0xa05f8900 - 0xa05f6908. Event - types can be found in include/asm-sh/dreamcast/sysasic.h. There are three - groups of EMRs that parallel the ESRs. Each EMR group corresponds to an - IRQ, so 0xa05f6910 - 0xa05f6918 triggers IRQ 13, 0xa05f6920 - 0xa05f6928 - triggers IRQ 11, and 0xa05f6930 - 0xa05f6938 triggers IRQ 9. - - In the kernel, these events are mapped to virtual IRQs so that drivers can - respond to them as they would a normal interrupt. In order to keep this - mapping simple, the events are mapped as: - - 6900/6910 - Events 0-31, IRQ 13 - 6904/6924 - Events 32-63, IRQ 11 - 6908/6938 - Events 64-95, IRQ 9 - -*/ - -#define ESR_BASE 0x005f6900 /* Base event status register */ -#define EMR_BASE 0x005f6910 /* Base event mask register */ - -/* Helps us determine the EMR group that this event belongs to: 0 = 0x6910, - 1 = 0x6920, 2 = 0x6930; also determine the event offset */ -#define LEVEL(event) (((event) - HW_EVENT_IRQ_BASE) / 32) - -/* Return the hardware event's bit positon within the EMR/ESR */ -#define EVENT_BIT(event) (((event) - HW_EVENT_IRQ_BASE) & 31) - -/* For each of these *_irq routines, the IRQ passed in is the virtual IRQ - (logically mapped to the corresponding bit for the hardware event). */ - -/* Disable the hardware event by masking its bit in its EMR */ -static inline void disable_systemasic_irq(unsigned int irq) -{ - __u32 emr = EMR_BASE + (LEVEL(irq) << 4) + (LEVEL(irq) << 2); - __u32 mask; - - mask = inl(emr); - mask &= ~(1 << EVENT_BIT(irq)); - outl(mask, emr); -} - -/* Enable the hardware event by setting its bit in its EMR */ -static inline void enable_systemasic_irq(unsigned int irq) -{ - __u32 emr = EMR_BASE + (LEVEL(irq) << 4) + (LEVEL(irq) << 2); - __u32 mask; - - mask = inl(emr); - mask |= (1 << EVENT_BIT(irq)); - outl(mask, emr); -} - -/* Acknowledge a hardware event by writing its bit back to its ESR */ -static void ack_systemasic_irq(unsigned int irq) -{ - __u32 esr = ESR_BASE + (LEVEL(irq) << 2); - disable_systemasic_irq(irq); - outl((1 << EVENT_BIT(irq)), esr); -} - -/* After a IRQ has been ack'd and responded to, it needs to be renabled */ -static void end_systemasic_irq(unsigned int irq) -{ - if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS))) - enable_systemasic_irq(irq); -} - -static unsigned int startup_systemasic_irq(unsigned int irq) -{ - enable_systemasic_irq(irq); - - return 0; -} - -static void shutdown_systemasic_irq(unsigned int irq) -{ - disable_systemasic_irq(irq); -} - -struct hw_interrupt_type systemasic_int = { - .typename = "System ASIC", - .startup = startup_systemasic_irq, - .shutdown = shutdown_systemasic_irq, - .enable = enable_systemasic_irq, - .disable = disable_systemasic_irq, - .ack = ack_systemasic_irq, - .end = end_systemasic_irq, -}; - -/* - * Map the hardware event indicated by the processor IRQ to a virtual IRQ. - */ -int systemasic_irq_demux(int irq) -{ - __u32 emr, esr, status, level; - __u32 j, bit; - - switch (irq) { - case 13: - level = 0; - break; - case 11: - level = 1; - break; - case 9: - level = 2; - break; - default: - return irq; - } - emr = EMR_BASE + (level << 4) + (level << 2); - esr = ESR_BASE + (level << 2); - - /* Mask the ESR to filter any spurious, unwanted interrupts */ - status = inl(esr); - status &= inl(emr); - - /* Now scan and find the first set bit as the event to map */ - for (bit = 1, j = 0; j < 32; bit <<= 1, j++) { - if (status & bit) { - irq = HW_EVENT_IRQ_BASE + j + (level << 5); - return irq; - } - } - - /* Not reached */ - return irq; -} diff --git a/arch/sh/boards/dreamcast/rtc.c b/arch/sh/boards/dreamcast/rtc.c deleted file mode 100644 index a7433685798..00000000000 --- a/arch/sh/boards/dreamcast/rtc.c +++ /dev/null @@ -1,81 +0,0 @@ -/* - * arch/sh/boards/dreamcast/rtc.c - * - * Dreamcast AICA RTC routines. - * - * Copyright (c) 2001, 2002 M. R. Brown - * Copyright (c) 2002 Paul Mundt - * - * Released under the terms of the GNU GPL v2.0. - * - */ - -#include -#include -#include - -/* The AICA RTC has an Epoch of 1/1/1950, so we must subtract 20 years (in - seconds) to get the standard Unix Epoch when getting the time, and add - 20 years when setting the time. */ -#define TWENTY_YEARS ((20 * 365LU + 5) * 86400) - -/* The AICA RTC is represented by a 32-bit seconds counter stored in 2 16-bit - registers.*/ -#define AICA_RTC_SECS_H 0xa0710000 -#define AICA_RTC_SECS_L 0xa0710004 - -/** - * aica_rtc_gettimeofday - Get the time from the AICA RTC - * @ts: pointer to resulting timespec - * - * Grabs the current RTC seconds counter and adjusts it to the Unix Epoch. - */ -static void aica_rtc_gettimeofday(struct timespec *ts) -{ - unsigned long val1, val2; - - do { - val1 = ((ctrl_inl(AICA_RTC_SECS_H) & 0xffff) << 16) | - (ctrl_inl(AICA_RTC_SECS_L) & 0xffff); - - val2 = ((ctrl_inl(AICA_RTC_SECS_H) & 0xffff) << 16) | - (ctrl_inl(AICA_RTC_SECS_L) & 0xffff); - } while (val1 != val2); - - ts->tv_sec = val1 - TWENTY_YEARS; - - /* Can't get nanoseconds with just a seconds counter. */ - ts->tv_nsec = 0; -} - -/** - * aica_rtc_settimeofday - Set the AICA RTC to the current time - * @secs: contains the time_t to set - * - * Adjusts the given @tv to the AICA Epoch and sets the RTC seconds counter. - */ -static int aica_rtc_settimeofday(const time_t secs) -{ - unsigned long val1, val2; - unsigned long adj = secs + TWENTY_YEARS; - - do { - ctrl_outl((adj & 0xffff0000) >> 16, AICA_RTC_SECS_H); - ctrl_outl((adj & 0xffff), AICA_RTC_SECS_L); - - val1 = ((ctrl_inl(AICA_RTC_SECS_H) & 0xffff) << 16) | - (ctrl_inl(AICA_RTC_SECS_L) & 0xffff); - - val2 = ((ctrl_inl(AICA_RTC_SECS_H) & 0xffff) << 16) | - (ctrl_inl(AICA_RTC_SECS_L) & 0xffff); - } while (val1 != val2); - - return 0; -} - -void aica_time_init(void) -{ - rtc_sh_get_time = aica_rtc_gettimeofday; - rtc_sh_set_time = aica_rtc_settimeofday; -} - diff --git a/arch/sh/boards/dreamcast/setup.c b/arch/sh/boards/dreamcast/setup.c deleted file mode 100644 index 7d944fc75e9..00000000000 --- a/arch/sh/boards/dreamcast/setup.c +++ /dev/null @@ -1,64 +0,0 @@ -/* - * arch/sh/boards/dreamcast/setup.c - * - * Hardware support for the Sega Dreamcast. - * - * Copyright (c) 2001, 2002 M. R. Brown - * Copyright (c) 2002, 2003, 2004 Paul Mundt - * - * This file is part of the LinuxDC project (www.linuxdc.org) - * - * Released under the terms of the GNU GPL v2.0. - * - * This file originally bore the message (with enclosed-$): - * Id: setup_dc.c,v 1.5 2001/05/24 05:09:16 mrbrown Exp - * SEGA Dreamcast support - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -extern struct hw_interrupt_type systemasic_int; -extern void aica_time_init(void); -extern int gapspci_init(void); -extern int systemasic_irq_demux(int); - -static void __init dreamcast_setup(char **cmdline_p) -{ - int i; - - /* Mask all hardware events */ - /* XXX */ - - /* Acknowledge any previous events */ - /* XXX */ - - __set_io_port_base(0xa0000000); - - /* Assign all virtual IRQs to the System ASIC int. handler */ - for (i = HW_EVENT_IRQ_BASE; i < HW_EVENT_IRQ_MAX; i++) - irq_desc[i].chip = &systemasic_int; - - board_time_init = aica_time_init; - -#ifdef CONFIG_PCI - if (gapspci_init() < 0) - printk(KERN_WARNING "GAPSPCI was not detected.\n"); -#endif -} - -static struct sh_machine_vector mv_dreamcast __initmv = { - .mv_name = "Sega Dreamcast", - .mv_setup = dreamcast_setup, - .mv_irq_demux = systemasic_irq_demux, -}; diff --git a/arch/sh/boards/hp6xx/Makefile b/arch/sh/boards/hp6xx/Makefile deleted file mode 100644 index b3124278247..00000000000 --- a/arch/sh/boards/hp6xx/Makefile +++ /dev/null @@ -1,7 +0,0 @@ -# -# Makefile for the HP6xx specific parts of the kernel -# - -obj-y := setup.o -obj-$(CONFIG_PM) += pm.o pm_wakeup.o -obj-$(CONFIG_APM_EMULATION) += hp6xx_apm.o diff --git a/arch/sh/boards/hp6xx/hp6xx_apm.c b/arch/sh/boards/hp6xx/hp6xx_apm.c deleted file mode 100644 index 177f4f028e0..00000000000 --- a/arch/sh/boards/hp6xx/hp6xx_apm.c +++ /dev/null @@ -1,111 +0,0 @@ -/* - * bios-less APM driver for hp680 - * - * Copyright 2005 (c) Andriy Skulysh - * Copyright 2008 (c) Kristoffer Ericson - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License. - */ -#include -#include -#include -#include -#include -#include -#include -#include - -/* percentage values */ -#define APM_CRITICAL 10 -#define APM_LOW 30 - -/* resonably sane values */ -#define HP680_BATTERY_MAX 898 -#define HP680_BATTERY_MIN 486 -#define HP680_BATTERY_AC_ON 1023 - -#define MODNAME "hp6x0_apm" - -#define PGDR 0xa400012c - -static void hp6x0_apm_get_power_status(struct apm_power_info *info) -{ - int battery, backup, charging, percentage; - u8 pgdr; - - battery = adc_single(ADC_CHANNEL_BATTERY); - backup = adc_single(ADC_CHANNEL_BACKUP); - charging = adc_single(ADC_CHANNEL_CHARGE); - - percentage = 100 * (battery - HP680_BATTERY_MIN) / - (HP680_BATTERY_MAX - HP680_BATTERY_MIN); - - /* % of full battery */ - info->battery_life = percentage; - - /* We want our estimates in minutes */ - info->units = 0; - - /* Extremely(!!) rough estimate, we will replace this with a datalist later on */ - info->time = (2 * battery); - - info->ac_line_status = (battery > HP680_BATTERY_AC_ON) ? - APM_AC_ONLINE : APM_AC_OFFLINE; - - pgdr = ctrl_inb(PGDR); - if (pgdr & PGDR_MAIN_BATTERY_OUT) { - info->battery_status = APM_BATTERY_STATUS_NOT_PRESENT; - info->battery_flag = 0x80; - } else if (charging < 8) { - info->battery_status = APM_BATTERY_STATUS_CHARGING; - info->battery_flag = 0x08; - info->ac_line_status = 0x01; - } else if (percentage <= APM_CRITICAL) { - info->battery_status = APM_BATTERY_STATUS_CRITICAL; - info->battery_flag = 0x04; - } else if (percentage <= APM_LOW) { - info->battery_status = APM_BATTERY_STATUS_LOW; - info->battery_flag = 0x02; - } else { - info->battery_status = APM_BATTERY_STATUS_HIGH; - info->battery_flag = 0x01; - } -} - -static irqreturn_t hp6x0_apm_interrupt(int irq, void *dev) -{ - if (!APM_DISABLED) - apm_queue_event(APM_USER_SUSPEND); - - return IRQ_HANDLED; -} - -static int __init hp6x0_apm_init(void) -{ - int ret; - - ret = request_irq(HP680_BTN_IRQ, hp6x0_apm_interrupt, - IRQF_DISABLED, MODNAME, NULL); - if (unlikely(ret < 0)) { - printk(KERN_ERR MODNAME ": IRQ %d request failed\n", - HP680_BTN_IRQ); - return ret; - } - - apm_get_power_status = hp6x0_apm_get_power_status; - - return ret; -} - -static void __exit hp6x0_apm_exit(void) -{ - free_irq(HP680_BTN_IRQ, 0); -} - -module_init(hp6x0_apm_init); -module_exit(hp6x0_apm_exit); - -MODULE_AUTHOR("Adriy Skulysh"); -MODULE_DESCRIPTION("hp6xx Advanced Power Management"); -MODULE_LICENSE("GPL"); diff --git a/arch/sh/boards/hp6xx/pm.c b/arch/sh/boards/hp6xx/pm.c deleted file mode 100644 index e96684def78..00000000000 --- a/arch/sh/boards/hp6xx/pm.c +++ /dev/null @@ -1,81 +0,0 @@ -/* - * hp6x0 Power Management Routines - * - * Copyright (c) 2006 Andriy Skulysh - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License. - */ -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#define STBCR 0xffffff82 -#define STBCR2 0xffffff88 - -static int hp6x0_pm_enter(suspend_state_t state) -{ - u8 stbcr, stbcr2; -#ifdef CONFIG_HD64461_ENABLER - u8 scr; - u16 hd64461_stbcr; -#endif - -#ifdef CONFIG_HD64461_ENABLER - outb(0, HD64461_PCC1CSCIER); - - scr = inb(HD64461_PCC1SCR); - scr |= HD64461_PCCSCR_VCC1; - outb(scr, HD64461_PCC1SCR); - - hd64461_stbcr = inw(HD64461_STBCR); - hd64461_stbcr |= HD64461_STBCR_SPC1ST; - outw(hd64461_stbcr, HD64461_STBCR); -#endif - - ctrl_outb(0x1f, DACR); - - stbcr = ctrl_inb(STBCR); - ctrl_outb(0x01, STBCR); - - stbcr2 = ctrl_inb(STBCR2); - ctrl_outb(0x7f , STBCR2); - - outw(0xf07f, HD64461_SCPUCR); - - pm_enter(); - - outw(0, HD64461_SCPUCR); - ctrl_outb(stbcr, STBCR); - ctrl_outb(stbcr2, STBCR2); - -#ifdef CONFIG_HD64461_ENABLER - hd64461_stbcr = inw(HD64461_STBCR); - hd64461_stbcr &= ~HD64461_STBCR_SPC1ST; - outw(hd64461_stbcr, HD64461_STBCR); - - outb(0x4c, HD64461_PCC1CSCIER); - outb(0x00, HD64461_PCC1CSCR); -#endif - - return 0; -} - -static struct platform_suspend_ops hp6x0_pm_ops = { - .enter = hp6x0_pm_enter, - .valid = suspend_valid_only_mem, -}; - -static int __init hp6x0_pm_init(void) -{ - suspend_set_ops(&hp6x0_pm_ops); - return 0; -} - -late_initcall(hp6x0_pm_init); diff --git a/arch/sh/boards/hp6xx/pm_wakeup.S b/arch/sh/boards/hp6xx/pm_wakeup.S deleted file mode 100644 index 44b648cf6f2..00000000000 --- a/arch/sh/boards/hp6xx/pm_wakeup.S +++ /dev/null @@ -1,58 +0,0 @@ -/* - * Copyright (c) 2006 Andriy Skulysh - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - */ - -#include -#include - -#define k0 r0 -#define k1 r1 -#define k2 r2 -#define k3 r3 -#define k4 r4 - -/* - * Kernel mode register usage: - * k0 scratch - * k1 scratch - * k2 scratch (Exception code) - * k3 scratch (Return address) - * k4 scratch - * k5 reserved - * k6 Global Interrupt Mask (0--15 << 4) - * k7 CURRENT_THREAD_INFO (pointer to current thread info) - */ - -ENTRY(wakeup_start) -! clear STBY bit - mov #-126, k2 - and #127, k0 - mov.b k0, @k2 -! enable refresh - mov.l 5f, k1 - mov.w 6f, k0 - mov.w k0, @k1 -! jump to handler - mov.l 2f, k2 - mov.l 3f, k3 - mov.l @k2, k2 - - mov.l 4f, k1 - jmp @k1 - nop - - .align 2 -1: .long EXPEVT -2: .long INTEVT -3: .long ret_from_irq -4: .long handle_exception -5: .long 0xffffff68 -6: .word 0x0524 - -ENTRY(wakeup_end) - nop diff --git a/arch/sh/boards/hp6xx/setup.c b/arch/sh/boards/hp6xx/setup.c deleted file mode 100644 index 475b46caec1..00000000000 --- a/arch/sh/boards/hp6xx/setup.c +++ /dev/null @@ -1,121 +0,0 @@ -/* - * linux/arch/sh/boards/hp6xx/setup.c - * - * Copyright (C) 2002 Andriy Skulysh - * Copyright (C) 2007 Kristoffer Ericson - * - * May be copied or modified under the terms of the GNU General Public - * License. See linux/COPYING for more information. - * - * Setup code for HP620/HP660/HP680/HP690 (internal peripherials only) - */ -#include -#include -#include -#include -#include -#include -#include -#include - -#define SCPCR 0xa4000116 -#define SCPDR 0xa4000136 - -/* CF Slot */ -static struct resource cf_ide_resources[] = { - [0] = { - .start = 0x15000000 + 0x1f0, - .end = 0x15000000 + 0x1f0 + 0x08 - 0x01, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = 0x15000000 + 0x1fe, - .end = 0x15000000 + 0x1fe + 0x01, - .flags = IORESOURCE_MEM, - }, - [2] = { - .start = 77, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device cf_ide_device = { - .name = "pata_platform", - .id = -1, - .num_resources = ARRAY_SIZE(cf_ide_resources), - .resource = cf_ide_resources, -}; - -static struct platform_device jornadakbd_device = { - .name = "jornada680_kbd", - .id = -1, -}; - -static struct platform_device *hp6xx_devices[] __initdata = { - &cf_ide_device, - &jornadakbd_device, -}; - -static void __init hp6xx_init_irq(void) -{ - /* Gets touchscreen and powerbutton IRQ working */ - plat_irq_setup_pins(IRQ_MODE_IRQ); -} - -static int __init hp6xx_devices_setup(void) -{ - return platform_add_devices(hp6xx_devices, ARRAY_SIZE(hp6xx_devices)); -} - -static void __init hp6xx_setup(char **cmdline_p) -{ - u8 v8; - u16 v; - - v = inw(HD64461_STBCR); - v |= HD64461_STBCR_SURTST | HD64461_STBCR_SIRST | - HD64461_STBCR_STM1ST | HD64461_STBCR_STM0ST | - HD64461_STBCR_SAFEST | HD64461_STBCR_SPC0ST | - HD64461_STBCR_SMIAST | HD64461_STBCR_SAFECKE_OST| - HD64461_STBCR_SAFECKE_IST; -#ifndef CONFIG_HD64461_ENABLER - v |= HD64461_STBCR_SPC1ST; -#endif - outw(v, HD64461_STBCR); - v = inw(HD64461_GPADR); - v |= HD64461_GPADR_SPEAKER | HD64461_GPADR_PCMCIA0; - outw(v, HD64461_GPADR); - - outw(HD64461_PCCGCR_VCC0 | HD64461_PCCSCR_VCC1, HD64461_PCC0GCR); - -#ifndef CONFIG_HD64461_ENABLER - outw(HD64461_PCCGCR_VCC0 | HD64461_PCCSCR_VCC1, HD64461_PCC1GCR); -#endif - - sh_dac_output(0, DAC_SPEAKER_VOLUME); - sh_dac_disable(DAC_SPEAKER_VOLUME); - v8 = ctrl_inb(DACR); - v8 &= ~DACR_DAE; - ctrl_outb(v8,DACR); - - v8 = ctrl_inb(SCPDR); - v8 |= SCPDR_TS_SCAN_X | SCPDR_TS_SCAN_Y; - v8 &= ~SCPDR_TS_SCAN_ENABLE; - ctrl_outb(v8, SCPDR); - - v = ctrl_inw(SCPCR); - v &= ~SCPCR_TS_MASK; - v |= SCPCR_TS_ENABLE; - ctrl_outw(v, SCPCR); -} -device_initcall(hp6xx_devices_setup); - -static struct sh_machine_vector mv_hp6xx __initmv = { - .mv_name = "hp6xx", - .mv_setup = hp6xx_setup, - /* IRQ's : CPU(64) + CCHIP(16) + FREE_TO_USE(6) */ - .mv_nr_irqs = HD64461_IRQBASE + HD64461_IRQ_NUM + 6, - .mv_irq_demux = hd64461_irq_demux, - /* Enable IRQ0 -> IRQ3 in IRQ_MODE */ - .mv_init_irq = hp6xx_init_irq, -}; diff --git a/arch/sh/boards/landisk/Makefile b/arch/sh/boards/landisk/Makefile deleted file mode 100644 index a696b4277fa..00000000000 --- a/arch/sh/boards/landisk/Makefile +++ /dev/null @@ -1,5 +0,0 @@ -# -# Makefile for I-O DATA DEVICE, INC. "LANDISK Series" -# - -obj-y := setup.o irq.o psw.o gio.o diff --git a/arch/sh/boards/landisk/gio.c b/arch/sh/boards/landisk/gio.c deleted file mode 100644 index edcde082032..00000000000 --- a/arch/sh/boards/landisk/gio.c +++ /dev/null @@ -1,171 +0,0 @@ -/* - * arch/sh/boards/landisk/gio.c - driver for landisk - * - * This driver will also support the I-O DATA Device, Inc. LANDISK Board. - * LANDISK and USL-5P Button, LED and GIO driver drive function. - * - * Copylight (C) 2006 kogiidena - * Copylight (C) 2002 Atom Create Engineering Co., Ltd. * - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - */ -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#define DEVCOUNT 4 -#define GIO_MINOR 2 /* GIO minor no. */ - -static dev_t dev; -static struct cdev *cdev_p; -static int openCnt; - -static int gio_open(struct inode *inode, struct file *filp) -{ - int minor; - int ret = -ENOENT; - - lock_kernel(); - minor = MINOR(inode->i_rdev); - if (minor < DEVCOUNT) { - if (openCnt > 0) { - ret = -EALREADY; - } else { - openCnt++; - ret = 0; - } - } - unlock_kernel(); - return ret; -} - -static int gio_close(struct inode *inode, struct file *filp) -{ - int minor; - - minor = MINOR(inode->i_rdev); - if (minor < DEVCOUNT) { - openCnt--; - } - return 0; -} - -static int gio_ioctl(struct inode *inode, struct file *filp, - unsigned int cmd, unsigned long arg) -{ - unsigned int data; - static unsigned int addr = 0; - - if (cmd & 0x01) { /* write */ - if (copy_from_user(&data, (int *)arg, sizeof(int))) { - return -EFAULT; - } - } - - switch (cmd) { - case GIODRV_IOCSGIOSETADDR: /* address set */ - addr = data; - break; - - case GIODRV_IOCSGIODATA1: /* write byte */ - ctrl_outb((unsigned char)(0x0ff & data), addr); - break; - - case GIODRV_IOCSGIODATA2: /* write word */ - if (addr & 0x01) { - return -EFAULT; - } - ctrl_outw((unsigned short int)(0x0ffff & data), addr); - break; - - case GIODRV_IOCSGIODATA4: /* write long */ - if (addr & 0x03) { - return -EFAULT; - } - ctrl_outl(data, addr); - break; - - case GIODRV_IOCGGIODATA1: /* read byte */ - data = ctrl_inb(addr); - break; - - case GIODRV_IOCGGIODATA2: /* read word */ - if (addr & 0x01) { - return -EFAULT; - } - data = ctrl_inw(addr); - break; - - case GIODRV_IOCGGIODATA4: /* read long */ - if (addr & 0x03) { - return -EFAULT; - } - data = ctrl_inl(addr); - break; - default: - return -EFAULT; - break; - } - - if ((cmd & 0x01) == 0) { /* read */ - if (copy_to_user((int *)arg, &data, sizeof(int))) { - return -EFAULT; - } - } - return 0; -} - -static const struct file_operations gio_fops = { - .owner = THIS_MODULE, - .open = gio_open, /* open */ - .release = gio_close, /* release */ - .ioctl = gio_ioctl, /* ioctl */ -}; - -static int __init gio_init(void) -{ - int error; - - printk(KERN_INFO "gio: driver initialized\n"); - - openCnt = 0; - - if ((error = alloc_chrdev_region(&dev, 0, DEVCOUNT, "gio")) < 0) { - printk(KERN_ERR - "gio: Couldn't alloc_chrdev_region, error=%d\n", - error); - return 1; - } - - cdev_p = cdev_alloc(); - cdev_p->ops = &gio_fops; - error = cdev_add(cdev_p, dev, DEVCOUNT); - if (error) { - printk(KERN_ERR - "gio: Couldn't cdev_add, error=%d\n", error); - return 1; - } - - return 0; -} - -static void __exit gio_exit(void) -{ - cdev_del(cdev_p); - unregister_chrdev_region(dev, DEVCOUNT); -} - -module_init(gio_init); -module_exit(gio_exit); - -MODULE_LICENSE("GPL"); diff --git a/arch/sh/boards/landisk/irq.c b/arch/sh/boards/landisk/irq.c deleted file mode 100644 index d0f9378f6ff..00000000000 --- a/arch/sh/boards/landisk/irq.c +++ /dev/null @@ -1,56 +0,0 @@ -/* - * arch/sh/boards/landisk/irq.c - * - * I-O DATA Device, Inc. LANDISK Support - * - * Copyright (C) 2005-2007 kogiidena - * - * Copyright (C) 2001 Ian da Silva, Jeremy Siegel - * Based largely on io_se.c. - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ -#include -#include -#include -#include -#include - -static void disable_landisk_irq(unsigned int irq) -{ - unsigned char mask = 0xff ^ (0x01 << (irq - 5)); - - ctrl_outb(ctrl_inb(PA_IMASK) & mask, PA_IMASK); -} - -static void enable_landisk_irq(unsigned int irq) -{ - unsigned char value = (0x01 << (irq - 5)); - - ctrl_outb(ctrl_inb(PA_IMASK) | value, PA_IMASK); -} - -static struct irq_chip landisk_irq_chip __read_mostly = { - .name = "LANDISK", - .mask = disable_landisk_irq, - .unmask = enable_landisk_irq, - .mask_ack = disable_landisk_irq, -}; - -/* - * Initialize IRQ setting - */ -void __init init_landisk_IRQ(void) -{ - int i; - - for (i = 5; i < 14; i++) { - disable_irq_nosync(i); - set_irq_chip_and_handler_name(i, &landisk_irq_chip, - handle_level_irq, "level"); - enable_landisk_irq(i); - } - ctrl_outb(0x00, PA_PWRINT_CLR); -} diff --git a/arch/sh/boards/landisk/psw.c b/arch/sh/boards/landisk/psw.c deleted file mode 100644 index 4bd502cbaee..00000000000 --- a/arch/sh/boards/landisk/psw.c +++ /dev/null @@ -1,143 +0,0 @@ -/* - * arch/sh/boards/landisk/psw.c - * - * push switch support for LANDISK and USL-5P - * - * Copyright (C) 2006-2007 Paul Mundt - * Copyright (C) 2007 kogiidena - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ -#include -#include -#include -#include -#include -#include - -static irqreturn_t psw_irq_handler(int irq, void *arg) -{ - struct platform_device *pdev = arg; - struct push_switch *psw = platform_get_drvdata(pdev); - struct push_switch_platform_info *psw_info = pdev->dev.platform_data; - unsigned int sw_value; - int ret = 0; - - sw_value = (0x0ff & (~ctrl_inb(PA_STATUS))); - - /* Nothing to do if there's no state change */ - if (psw->state) { - ret = 1; - goto out; - } - - /* Figure out who raised it */ - if (sw_value & (1 << psw_info->bit)) { - psw->state = 1; - mod_timer(&psw->debounce, jiffies + 50); - ret = 1; - } - -out: - /* Clear the switch IRQs */ - ctrl_outb(0x00, PA_PWRINT_CLR); - - return IRQ_RETVAL(ret); -} - -static struct resource psw_power_resources[] = { - [0] = { - .start = IRQ_POWER, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct resource psw_usl5p_resources[] = { - [0] = { - .start = IRQ_BUTTON, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct push_switch_platform_info psw_power_platform_data = { - .name = "psw_power", - .bit = 4, - .irq_flags = IRQF_SHARED, - .irq_handler = psw_irq_handler, -}; - -static struct push_switch_platform_info psw1_platform_data = { - .name = "psw1", - .bit = 0, - .irq_flags = IRQF_SHARED, - .irq_handler = psw_irq_handler, -}; - -static struct push_switch_platform_info psw2_platform_data = { - .name = "psw2", - .bit = 2, - .irq_flags = IRQF_SHARED, - .irq_handler = psw_irq_handler, -}; - -static struct push_switch_platform_info psw3_platform_data = { - .name = "psw3", - .bit = 1, - .irq_flags = IRQF_SHARED, - .irq_handler = psw_irq_handler, -}; - -static struct platform_device psw_power_switch_device = { - .name = "push-switch", - .id = 0, - .num_resources = ARRAY_SIZE(psw_power_resources), - .resource = psw_power_resources, - .dev = { - .platform_data = &psw_power_platform_data, - }, -}; - -static struct platform_device psw1_switch_device = { - .name = "push-switch", - .id = 1, - .num_resources = ARRAY_SIZE(psw_usl5p_resources), - .resource = psw_usl5p_resources, - .dev = { - .platform_data = &psw1_platform_data, - }, -}; - -static struct platform_device psw2_switch_device = { - .name = "push-switch", - .id = 2, - .num_resources = ARRAY_SIZE(psw_usl5p_resources), - .resource = psw_usl5p_resources, - .dev = { - .platform_data = &psw2_platform_data, - }, -}; - -static struct platform_device psw3_switch_device = { - .name = "push-switch", - .id = 3, - .num_resources = ARRAY_SIZE(psw_usl5p_resources), - .resource = psw_usl5p_resources, - .dev = { - .platform_data = &psw3_platform_data, - }, -}; - -static struct platform_device *psw_devices[] = { - &psw_power_switch_device, - &psw1_switch_device, - &psw2_switch_device, - &psw3_switch_device, -}; - -static int __init psw_init(void) -{ - return platform_add_devices(psw_devices, ARRAY_SIZE(psw_devices)); -} -module_init(psw_init); diff --git a/arch/sh/boards/landisk/setup.c b/arch/sh/boards/landisk/setup.c deleted file mode 100644 index 470c7811168..00000000000 --- a/arch/sh/boards/landisk/setup.c +++ /dev/null @@ -1,105 +0,0 @@ -/* - * arch/sh/boards/landisk/setup.c - * - * I-O DATA Device, Inc. LANDISK Support. - * - * Copyright (C) 2000 Kazumoto Kojima - * Copyright (C) 2002 Paul Mundt - * Copylight (C) 2002 Atom Create Engineering Co., Ltd. - * Copyright (C) 2005-2007 kogiidena - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ -#include -#include -#include -#include -#include -#include -#include -#include - -void init_landisk_IRQ(void); - -static void landisk_power_off(void) -{ - ctrl_outb(0x01, PA_SHUTDOWN); -} - -static struct resource cf_ide_resources[3]; - -static struct pata_platform_info pata_info = { - .ioport_shift = 1, -}; - -static struct platform_device cf_ide_device = { - .name = "pata_platform", - .id = -1, - .num_resources = ARRAY_SIZE(cf_ide_resources), - .resource = cf_ide_resources, - .dev = { - .platform_data = &pata_info, - }, -}; - -static struct platform_device rtc_device = { - .name = "rs5c313", - .id = -1, -}; - -static struct platform_device *landisk_devices[] __initdata = { - &cf_ide_device, - &rtc_device, -}; - -static int __init landisk_devices_setup(void) -{ - pgprot_t prot; - unsigned long paddrbase; - void *cf_ide_base; - - /* open I/O area window */ - paddrbase = virt_to_phys((void *)PA_AREA5_IO); - prot = PAGE_KERNEL_PCC(1, _PAGE_PCC_IO16); - cf_ide_base = p3_ioremap(paddrbase, PAGE_SIZE, prot.pgprot); - if (!cf_ide_base) { - printk("allocate_cf_area : can't open CF I/O window!\n"); - return -ENOMEM; - } - - /* IDE cmd address : 0x1f0-0x1f7 and 0x3f6 */ - cf_ide_resources[0].start = (unsigned long)cf_ide_base + 0x40; - cf_ide_resources[0].end = (unsigned long)cf_ide_base + 0x40 + 0x0f; - cf_ide_resources[0].flags = IORESOURCE_IO; - cf_ide_resources[1].start = (unsigned long)cf_ide_base + 0x2c; - cf_ide_resources[1].end = (unsigned long)cf_ide_base + 0x2c + 0x03; - cf_ide_resources[1].flags = IORESOURCE_IO; - cf_ide_resources[2].start = IRQ_FATA; - cf_ide_resources[2].flags = IORESOURCE_IRQ; - - return platform_add_devices(landisk_devices, - ARRAY_SIZE(landisk_devices)); -} - -__initcall(landisk_devices_setup); - -static void __init landisk_setup(char **cmdline_p) -{ - /* LED ON */ - ctrl_outb(ctrl_inb(PA_LED) | 0x03, PA_LED); - - printk(KERN_INFO "I-O DATA DEVICE, INC. \"LANDISK Series\" support.\n"); - pm_power_off = landisk_power_off; -} - -/* - * The Machine Vector - */ -static struct sh_machine_vector mv_landisk __initmv = { - .mv_name = "LANDISK", - .mv_nr_irqs = 72, - .mv_setup = landisk_setup, - .mv_init_irq = init_landisk_IRQ, -}; diff --git a/arch/sh/boards/lboxre2/Makefile b/arch/sh/boards/lboxre2/Makefile deleted file mode 100644 index e9ed140c06f..00000000000 --- a/arch/sh/boards/lboxre2/Makefile +++ /dev/null @@ -1,5 +0,0 @@ -# -# Makefile for the L-BOX RE2 specific parts of the kernel -# Copyright (c) 2007 Nobuhiro Iwamatsu - -obj-y := setup.o irq.o diff --git a/arch/sh/boards/lboxre2/irq.c b/arch/sh/boards/lboxre2/irq.c deleted file mode 100644 index 5a1c3bbe7b5..00000000000 --- a/arch/sh/boards/lboxre2/irq.c +++ /dev/null @@ -1,31 +0,0 @@ -/* - * linux/arch/sh/boards/lboxre2/irq.c - * - * Copyright (C) 2007 Nobuhiro Iwamatsu - * - * NTT COMWARE L-BOX RE2 Support. - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - */ -#include -#include -#include -#include -#include -#include - -/* - * Initialize IRQ setting - */ -void __init init_lboxre2_IRQ(void) -{ - make_imask_irq(IRQ_CF1); - make_imask_irq(IRQ_CF0); - make_imask_irq(IRQ_INTD); - make_imask_irq(IRQ_ETH1); - make_imask_irq(IRQ_ETH0); - make_imask_irq(IRQ_INTA); -} diff --git a/arch/sh/boards/lboxre2/setup.c b/arch/sh/boards/lboxre2/setup.c deleted file mode 100644 index c74440d38ee..00000000000 --- a/arch/sh/boards/lboxre2/setup.c +++ /dev/null @@ -1,84 +0,0 @@ -/* - * linux/arch/sh/boards/lbox/setup.c - * - * Copyright (C) 2007 Nobuhiro Iwamatsu - * - * NTT COMWARE L-BOX RE2 Support - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - */ - -#include -#include -#include -#include -#include -#include -#include - -static struct resource cf_ide_resources[] = { - [0] = { - .start = 0x1f0, - .end = 0x1f0 + 8 , - .flags = IORESOURCE_IO, - }, - [1] = { - .start = 0x1f0 + 0x206, - .end = 0x1f0 +8 + 0x206 + 8, - .flags = IORESOURCE_IO, - }, - [2] = { - .start = IRQ_CF0, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device cf_ide_device = { - .name = "pata_platform", - .id = -1, - .num_resources = ARRAY_SIZE(cf_ide_resources), - .resource = cf_ide_resources, -}; - -static struct platform_device *lboxre2_devices[] __initdata = { - &cf_ide_device, -}; - -static int __init lboxre2_devices_setup(void) -{ - u32 cf0_io_base; /* Boot CF base address */ - pgprot_t prot; - unsigned long paddrbase, psize; - - /* open I/O area window */ - paddrbase = virt_to_phys((void*)PA_AREA5_IO); - psize = PAGE_SIZE; - prot = PAGE_KERNEL_PCC( 1 , _PAGE_PCC_IO16); - cf0_io_base = (u32)p3_ioremap(paddrbase, psize, prot.pgprot); - if (!cf0_io_base) { - printk(KERN_ERR "%s : can't open CF I/O window!\n" , __func__ ); - return -ENOMEM; - } - - cf_ide_resources[0].start += cf0_io_base ; - cf_ide_resources[0].end += cf0_io_base ; - cf_ide_resources[1].start += cf0_io_base ; - cf_ide_resources[1].end += cf0_io_base ; - - return platform_add_devices(lboxre2_devices, - ARRAY_SIZE(lboxre2_devices)); - -} -device_initcall(lboxre2_devices_setup); - -/* - * The Machine Vector - */ -static struct sh_machine_vector mv_lboxre2 __initmv = { - .mv_name = "L-BOX RE2", - .mv_nr_irqs = 72, - .mv_init_irq = init_lboxre2_IRQ, -}; diff --git a/arch/sh/boards/mach-ap325rxa/Makefile b/arch/sh/boards/mach-ap325rxa/Makefile new file mode 100644 index 00000000000..f663768429f --- /dev/null +++ b/arch/sh/boards/mach-ap325rxa/Makefile @@ -0,0 +1 @@ +obj-y := setup.o diff --git a/arch/sh/boards/mach-ap325rxa/setup.c b/arch/sh/boards/mach-ap325rxa/setup.c new file mode 100644 index 00000000000..7fa74462bd9 --- /dev/null +++ b/arch/sh/boards/mach-ap325rxa/setup.c @@ -0,0 +1,313 @@ +/* + * Renesas - AP-325RXA + * (Compatible with Algo System ., LTD. - AP-320A) + * + * Copyright (C) 2008 Renesas Solutions Corp. + * Author : Yusuke Goda + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +static struct smc911x_platdata smc911x_info = { + .flags = SMC911X_USE_32BIT, + .irq_flags = IRQF_TRIGGER_LOW, +}; + +static struct resource smc9118_resources[] = { + [0] = { + .start = 0xb6080000, + .end = 0xb60fffff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 35, + .end = 35, + .flags = IORESOURCE_IRQ, + } +}; + +static struct platform_device smc9118_device = { + .name = "smc911x", + .id = -1, + .num_resources = ARRAY_SIZE(smc9118_resources), + .resource = smc9118_resources, + .dev = { + .platform_data = &smc911x_info, + }, +}; + +static struct mtd_partition ap325rxa_nor_flash_partitions[] = { + { + .name = "uboot", + .offset = 0, + .size = (1 * 1024 * 1024), + .mask_flags = MTD_WRITEABLE, /* Read-only */ + }, { + .name = "kernel", + .offset = MTDPART_OFS_APPEND, + .size = (2 * 1024 * 1024), + }, { + .name = "other", + .offset = MTDPART_OFS_APPEND, + .size = MTDPART_SIZ_FULL, + }, +}; + +static struct physmap_flash_data ap325rxa_nor_flash_data = { + .width = 2, + .parts = ap325rxa_nor_flash_partitions, + .nr_parts = ARRAY_SIZE(ap325rxa_nor_flash_partitions), +}; + +static struct resource ap325rxa_nor_flash_resources[] = { + [0] = { + .name = "NOR Flash", + .start = 0x00000000, + .end = 0x00ffffff, + .flags = IORESOURCE_MEM, + } +}; + +static struct platform_device ap325rxa_nor_flash_device = { + .name = "physmap-flash", + .resource = ap325rxa_nor_flash_resources, + .num_resources = ARRAY_SIZE(ap325rxa_nor_flash_resources), + .dev = { + .platform_data = &ap325rxa_nor_flash_data, + }, +}; + +#define FPGA_LCDREG 0xB4100180 +#define FPGA_BKLREG 0xB4100212 +#define FPGA_LCDREG_VAL 0x0018 +#define PORT_PHCR 0xA405010E +#define PORT_PLCR 0xA4050114 +#define PORT_PMCR 0xA4050116 +#define PORT_PRCR 0xA405011C +#define PORT_PSCR 0xA405011E +#define PORT_PZCR 0xA405014C +#define PORT_HIZCRA 0xA4050158 +#define PORT_MSELCRB 0xA4050182 +#define PORT_PSDR 0xA405013E +#define PORT_PZDR 0xA405016C +#define PORT_PSELD 0xA4050154 + +static void ap320_wvga_power_on(void *board_data) +{ + msleep(100); + + /* ASD AP-320/325 LCD ON */ + ctrl_outw(FPGA_LCDREG_VAL, FPGA_LCDREG); + + /* backlight */ + ctrl_outw((ctrl_inw(PORT_PSCR) & ~0x00C0) | 0x40, PORT_PSCR); + ctrl_outb(ctrl_inb(PORT_PSDR) & ~0x08, PORT_PSDR); + ctrl_outw(0x100, FPGA_BKLREG); +} + +static struct sh_mobile_lcdc_info lcdc_info = { + .clock_source = LCDC_CLK_EXTERNAL, + .ch[0] = { + .chan = LCDC_CHAN_MAINLCD, + .bpp = 16, + .interface_type = RGB18, + .clock_divider = 1, + .lcd_cfg = { + .name = "LB070WV1", + .xres = 800, + .yres = 480, + .left_margin = 40, + .right_margin = 160, + .hsync_len = 8, + .upper_margin = 63, + .lower_margin = 80, + .vsync_len = 1, + .sync = 0, /* hsync and vsync are active low */ + }, + .board_cfg = { + .display_on = ap320_wvga_power_on, + }, + } +}; + +static struct resource lcdc_resources[] = { + [0] = { + .name = "LCDC", + .start = 0xfe940000, /* P4-only space */ + .end = 0xfe941fff, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device lcdc_device = { + .name = "sh_mobile_lcdc_fb", + .num_resources = ARRAY_SIZE(lcdc_resources), + .resource = lcdc_resources, + .dev = { + .platform_data = &lcdc_info, + }, +}; + +static unsigned char camera_ncm03j_magic[] = +{ + 0x87, 0x00, 0x88, 0x08, 0x89, 0x01, 0x8A, 0xE8, + 0x1D, 0x00, 0x1E, 0x8A, 0x21, 0x00, 0x33, 0x36, + 0x36, 0x60, 0x37, 0x08, 0x3B, 0x31, 0x44, 0x0F, + 0x46, 0xF0, 0x4B, 0x28, 0x4C, 0x21, 0x4D, 0x55, + 0x4E, 0x1B, 0x4F, 0xC7, 0x50, 0xFC, 0x51, 0x12, + 0x58, 0x02, 0x66, 0xC0, 0x67, 0x46, 0x6B, 0xA0, + 0x6C, 0x34, 0x7E, 0x25, 0x7F, 0x25, 0x8D, 0x0F, + 0x92, 0x40, 0x93, 0x04, 0x94, 0x26, 0x95, 0x0A, + 0x99, 0x03, 0x9A, 0xF0, 0x9B, 0x14, 0x9D, 0x7A, + 0xC5, 0x02, 0xD6, 0x07, 0x59, 0x00, 0x5A, 0x1A, + 0x5B, 0x2A, 0x5C, 0x37, 0x5D, 0x42, 0x5E, 0x56, + 0xC8, 0x00, 0xC9, 0x1A, 0xCA, 0x2A, 0xCB, 0x37, + 0xCC, 0x42, 0xCD, 0x56, 0xCE, 0x00, 0xCF, 0x1A, + 0xD0, 0x2A, 0xD1, 0x37, 0xD2, 0x42, 0xD3, 0x56, + 0x5F, 0x68, 0x60, 0x87, 0x61, 0xA3, 0x62, 0xBC, + 0x63, 0xD4, 0x64, 0xEA, 0xD6, 0x0F, +}; + +static int camera_set_capture(struct soc_camera_platform_info *info, + int enable) +{ + struct i2c_adapter *a = i2c_get_adapter(0); + struct i2c_msg msg; + int ret = 0; + int i; + + if (!enable) + return 0; /* no disable for now */ + + for (i = 0; i < ARRAY_SIZE(camera_ncm03j_magic); i += 2) { + u_int8_t buf[8]; + + msg.addr = 0x6e; + msg.buf = buf; + msg.len = 2; + msg.flags = 0; + + buf[0] = camera_ncm03j_magic[i]; + buf[1] = camera_ncm03j_magic[i + 1]; + + ret = (ret < 0) ? ret : i2c_transfer(a, &msg, 1); + } + + return ret; +} + +static struct soc_camera_platform_info camera_info = { + .iface = 0, + .format_name = "UYVY", + .format_depth = 16, + .format = { + .pixelformat = V4L2_PIX_FMT_UYVY, + .colorspace = V4L2_COLORSPACE_SMPTE170M, + .width = 640, + .height = 480, + }, + .bus_param = SOCAM_PCLK_SAMPLE_RISING | SOCAM_HSYNC_ACTIVE_HIGH | + SOCAM_VSYNC_ACTIVE_HIGH | SOCAM_MASTER | SOCAM_DATAWIDTH_8, + .set_capture = camera_set_capture, +}; + +static struct platform_device camera_device = { + .name = "soc_camera_platform", + .dev = { + .platform_data = &camera_info, + }, +}; + +static struct sh_mobile_ceu_info sh_mobile_ceu_info = { + .flags = SOCAM_PCLK_SAMPLE_RISING | SOCAM_HSYNC_ACTIVE_HIGH | + SOCAM_VSYNC_ACTIVE_HIGH | SOCAM_MASTER | SOCAM_DATAWIDTH_8, +}; + +static struct resource ceu_resources[] = { + [0] = { + .name = "CEU", + .start = 0xfe910000, + .end = 0xfe91009f, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 52, + .flags = IORESOURCE_IRQ, + }, + [2] = { + /* place holder for contiguous memory */ + }, +}; + +static struct platform_device ceu_device = { + .name = "sh_mobile_ceu", + .num_resources = ARRAY_SIZE(ceu_resources), + .resource = ceu_resources, + .dev = { + .platform_data = &sh_mobile_ceu_info, + }, +}; + +static struct platform_device *ap325rxa_devices[] __initdata = { + &smc9118_device, + &ap325rxa_nor_flash_device, + &lcdc_device, + &ceu_device, + &camera_device, +}; + +static struct i2c_board_info __initdata ap325rxa_i2c_devices[] = { +}; + +static int __init ap325rxa_devices_setup(void) +{ + clk_always_enable("mstp200"); /* LCDC */ + clk_always_enable("mstp203"); /* CEU */ + + platform_resource_setup_memory(&ceu_device, "ceu", 4 << 20); + + i2c_register_board_info(0, ap325rxa_i2c_devices, + ARRAY_SIZE(ap325rxa_i2c_devices)); + + return platform_add_devices(ap325rxa_devices, + ARRAY_SIZE(ap325rxa_devices)); +} +device_initcall(ap325rxa_devices_setup); + +static void __init ap325rxa_setup(char **cmdline_p) +{ + /* LCDC configuration */ + ctrl_outw(ctrl_inw(PORT_PHCR) & ~0xffff, PORT_PHCR); + ctrl_outw(ctrl_inw(PORT_PLCR) & ~0xffff, PORT_PLCR); + ctrl_outw(ctrl_inw(PORT_PMCR) & ~0xffff, PORT_PMCR); + ctrl_outw(ctrl_inw(PORT_PRCR) & ~0x03ff, PORT_PRCR); + ctrl_outw(ctrl_inw(PORT_HIZCRA) & ~0x01C0, PORT_HIZCRA); + + /* CEU */ + ctrl_outw(ctrl_inw(PORT_MSELCRB) & ~0x0001, PORT_MSELCRB); + ctrl_outw(ctrl_inw(PORT_PSELD) & ~0x0003, PORT_PSELD); + ctrl_outw((ctrl_inw(PORT_PZCR) & ~0xff00) | 0x5500, PORT_PZCR); + ctrl_outb((ctrl_inb(PORT_PZDR) & ~0xf0) | 0x20, PORT_PZDR); +} + +static struct sh_machine_vector mv_ap325rxa __initmv = { + .mv_name = "AP-325RXA", + .mv_setup = ap325rxa_setup, +}; diff --git a/arch/sh/boards/mach-cayman/Makefile b/arch/sh/boards/mach-cayman/Makefile new file mode 100644 index 00000000000..489a8f86736 --- /dev/null +++ b/arch/sh/boards/mach-cayman/Makefile @@ -0,0 +1,5 @@ +# +# Makefile for the Hitachi Cayman specific parts of the kernel +# +obj-y := setup.o irq.o +obj-$(CONFIG_HEARTBEAT) += led.o diff --git a/arch/sh/boards/mach-cayman/irq.c b/arch/sh/boards/mach-cayman/irq.c new file mode 100644 index 00000000000..ceb37ae92c7 --- /dev/null +++ b/arch/sh/boards/mach-cayman/irq.c @@ -0,0 +1,197 @@ +/* + * arch/sh/mach-cayman/irq.c - SH-5 Cayman Interrupt Support + * + * This file handles the board specific parts of the Cayman interrupt system + * + * Copyright (C) 2002 Stuart Menefy + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include +#include +#include +#include +#include +#include + +/* Setup for the SMSC FDC37C935 / LAN91C100FD */ +#define SMSC_IRQ IRQ_IRL1 + +/* Setup for PCI Bus 2, which transmits interrupts via the EPLD */ +#define PCI2_IRQ IRQ_IRL3 + +unsigned long epld_virt; + +#define EPLD_BASE 0x04002000 +#define EPLD_STATUS_BASE (epld_virt + 0x10) +#define EPLD_MASK_BASE (epld_virt + 0x20) + +/* Note the SMSC SuperIO chip and SMSC LAN chip interrupts are all muxed onto + the same SH-5 interrupt */ + +static irqreturn_t cayman_interrupt_smsc(int irq, void *dev_id) +{ + printk(KERN_INFO "CAYMAN: spurious SMSC interrupt\n"); + return IRQ_NONE; +} + +static irqreturn_t cayman_interrupt_pci2(int irq, void *dev_id) +{ + printk(KERN_INFO "CAYMAN: spurious PCI interrupt, IRQ %d\n", irq); + return IRQ_NONE; +} + +static struct irqaction cayman_action_smsc = { + .name = "Cayman SMSC Mux", + .handler = cayman_interrupt_smsc, + .flags = IRQF_DISABLED, +}; + +static struct irqaction cayman_action_pci2 = { + .name = "Cayman PCI2 Mux", + .handler = cayman_interrupt_pci2, + .flags = IRQF_DISABLED, +}; + +static void enable_cayman_irq(unsigned int irq) +{ + unsigned long flags; + unsigned long mask; + unsigned int reg; + unsigned char bit; + + irq -= START_EXT_IRQS; + reg = EPLD_MASK_BASE + ((irq / 8) << 2); + bit = 1<<(irq % 8); + local_irq_save(flags); + mask = ctrl_inl(reg); + mask |= bit; + ctrl_outl(mask, reg); + local_irq_restore(flags); +} + +void disable_cayman_irq(unsigned int irq) +{ + unsigned long flags; + unsigned long mask; + unsigned int reg; + unsigned char bit; + + irq -= START_EXT_IRQS; + reg = EPLD_MASK_BASE + ((irq / 8) << 2); + bit = 1<<(irq % 8); + local_irq_save(flags); + mask = ctrl_inl(reg); + mask &= ~bit; + ctrl_outl(mask, reg); + local_irq_restore(flags); +} + +static void ack_cayman_irq(unsigned int irq) +{ + disable_cayman_irq(irq); +} + +static void end_cayman_irq(unsigned int irq) +{ + if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS))) + enable_cayman_irq(irq); +} + +static unsigned int startup_cayman_irq(unsigned int irq) +{ + enable_cayman_irq(irq); + return 0; /* never anything pending */ +} + +static void shutdown_cayman_irq(unsigned int irq) +{ + disable_cayman_irq(irq); +} + +struct hw_interrupt_type cayman_irq_type = { + .typename = "Cayman-IRQ", + .startup = startup_cayman_irq, + .shutdown = shutdown_cayman_irq, + .enable = enable_cayman_irq, + .disable = disable_cayman_irq, + .ack = ack_cayman_irq, + .end = end_cayman_irq, +}; + +int cayman_irq_demux(int evt) +{ + int irq = intc_evt_to_irq[evt]; + + if (irq == SMSC_IRQ) { + unsigned long status; + int i; + + status = ctrl_inl(EPLD_STATUS_BASE) & + ctrl_inl(EPLD_MASK_BASE) & 0xff; + if (status == 0) { + irq = -1; + } else { + for (i=0; i<8; i++) { + if (status & (1<= NR_INTC_IRQS + 24) && (irq < NR_INTC_IRQS + 32)) { + return sprintf(p, "(PCI2 %d)", irq - (NR_INTC_IRQS + 24)); + } + + return 0; +} +#endif + +void init_cayman_irq(void) +{ + int i; + + epld_virt = onchip_remap(EPLD_BASE, 1024, "EPLD"); + if (!epld_virt) { + printk(KERN_ERR "Cayman IRQ: Unable to remap EPLD\n"); + return; + } + + for (i=0; i + * + * May be copied or modified under the terms of the GNU General Public + * License. See linux/COPYING for more information. + * + * Flash the LEDs + */ +#include + +/* +** It is supposed these functions to be used for a low level +** debugging (via Cayman LEDs), hence to be available as soon +** as possible. +** Unfortunately Cayman LEDs relies on Cayman EPLD to be mapped +** (this happen when IRQ are initialized... quite late). +** These triky dependencies should be removed. Temporary, it +** may be enough to NOP until EPLD is mapped. +*/ + +extern unsigned long epld_virt; + +#define LED_ADDR (epld_virt + 0x008) +#define HDSP2534_ADDR (epld_virt + 0x100) + +void mach_led(int position, int value) +{ + if (!epld_virt) + return; + + if (value) + ctrl_outl(0, LED_ADDR); + else + ctrl_outl(1, LED_ADDR); + +} + +void mach_alphanum(int position, unsigned char value) +{ + if (!epld_virt) + return; + + ctrl_outb(value, HDSP2534_ADDR + 0xe0 + (position << 2)); +} + +void mach_alphanum_brightness(int setting) +{ + ctrl_outb(setting & 7, HDSP2534_ADDR + 0xc0); +} diff --git a/arch/sh/boards/mach-cayman/setup.c b/arch/sh/boards/mach-cayman/setup.c new file mode 100644 index 00000000000..e7f9cc5f2ff --- /dev/null +++ b/arch/sh/boards/mach-cayman/setup.c @@ -0,0 +1,187 @@ +/* + * arch/sh/mach-cayman/setup.c + * + * SH5 Cayman support + * + * Copyright (C) 2002 David J. Mckay & Benedict Gaster + * Copyright (C) 2003 - 2007 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include +#include +#include +#include + +/* + * Platform Dependent Interrupt Priorities. + */ + +/* Using defaults defined in irq.h */ +#define RES NO_PRIORITY /* Disabled */ +#define IR0 IRL0_PRIORITY /* IRLs */ +#define IR1 IRL1_PRIORITY +#define IR2 IRL2_PRIORITY +#define IR3 IRL3_PRIORITY +#define PCA INTA_PRIORITY /* PCI Ints */ +#define PCB INTB_PRIORITY +#define PCC INTC_PRIORITY +#define PCD INTD_PRIORITY +#define SER TOP_PRIORITY +#define ERR TOP_PRIORITY +#define PW0 TOP_PRIORITY +#define PW1 TOP_PRIORITY +#define PW2 TOP_PRIORITY +#define PW3 TOP_PRIORITY +#define DM0 NO_PRIORITY /* DMA Ints */ +#define DM1 NO_PRIORITY +#define DM2 NO_PRIORITY +#define DM3 NO_PRIORITY +#define DAE NO_PRIORITY +#define TU0 TIMER_PRIORITY /* TMU Ints */ +#define TU1 NO_PRIORITY +#define TU2 NO_PRIORITY +#define TI2 NO_PRIORITY +#define ATI NO_PRIORITY /* RTC Ints */ +#define PRI NO_PRIORITY +#define CUI RTC_PRIORITY +#define ERI SCIF_PRIORITY /* SCIF Ints */ +#define RXI SCIF_PRIORITY +#define BRI SCIF_PRIORITY +#define TXI SCIF_PRIORITY +#define ITI TOP_PRIORITY /* WDT Ints */ + +/* Setup for the SMSC FDC37C935 */ +#define SMSC_SUPERIO_BASE 0x04000000 +#define SMSC_CONFIG_PORT_ADDR 0x3f0 +#define SMSC_INDEX_PORT_ADDR SMSC_CONFIG_PORT_ADDR +#define SMSC_DATA_PORT_ADDR 0x3f1 + +#define SMSC_ENTER_CONFIG_KEY 0x55 +#define SMSC_EXIT_CONFIG_KEY 0xaa + +#define SMCS_LOGICAL_DEV_INDEX 0x07 +#define SMSC_DEVICE_ID_INDEX 0x20 +#define SMSC_DEVICE_REV_INDEX 0x21 +#define SMSC_ACTIVATE_INDEX 0x30 +#define SMSC_PRIMARY_BASE_INDEX 0x60 +#define SMSC_SECONDARY_BASE_INDEX 0x62 +#define SMSC_PRIMARY_INT_INDEX 0x70 +#define SMSC_SECONDARY_INT_INDEX 0x72 + +#define SMSC_IDE1_DEVICE 1 +#define SMSC_KEYBOARD_DEVICE 7 +#define SMSC_CONFIG_REGISTERS 8 + +#define SMSC_SUPERIO_READ_INDEXED(index) ({ \ + outb((index), SMSC_INDEX_PORT_ADDR); \ + inb(SMSC_DATA_PORT_ADDR); }) +#define SMSC_SUPERIO_WRITE_INDEXED(val, index) ({ \ + outb((index), SMSC_INDEX_PORT_ADDR); \ + outb((val), SMSC_DATA_PORT_ADDR); }) + +#define IDE1_PRIMARY_BASE 0x01f0 +#define IDE1_SECONDARY_BASE 0x03f6 + +unsigned long smsc_superio_virt; + +int platform_int_priority[NR_INTC_IRQS] = { + IR0, IR1, IR2, IR3, PCA, PCB, PCC, PCD, /* IRQ 0- 7 */ + RES, RES, RES, RES, SER, ERR, PW3, PW2, /* IRQ 8-15 */ + PW1, PW0, DM0, DM1, DM2, DM3, DAE, RES, /* IRQ 16-23 */ + RES, RES, RES, RES, RES, RES, RES, RES, /* IRQ 24-31 */ + TU0, TU1, TU2, TI2, ATI, PRI, CUI, ERI, /* IRQ 32-39 */ + RXI, BRI, TXI, RES, RES, RES, RES, RES, /* IRQ 40-47 */ + RES, RES, RES, RES, RES, RES, RES, RES, /* IRQ 48-55 */ + RES, RES, RES, RES, RES, RES, RES, ITI, /* IRQ 56-63 */ +}; + +static int __init smsc_superio_setup(void) +{ + unsigned char devid, devrev; + + smsc_superio_virt = onchip_remap(SMSC_SUPERIO_BASE, 1024, "SMSC SuperIO"); + if (!smsc_superio_virt) { + panic("Unable to remap SMSC SuperIO\n"); + } + + /* Initially the chip is in run state */ + /* Put it into configuration state */ + outb(SMSC_ENTER_CONFIG_KEY, SMSC_CONFIG_PORT_ADDR); + outb(SMSC_ENTER_CONFIG_KEY, SMSC_CONFIG_PORT_ADDR); + + /* Read device ID info */ + devid = SMSC_SUPERIO_READ_INDEXED(SMSC_DEVICE_ID_INDEX); + devrev = SMSC_SUPERIO_READ_INDEXED(SMSC_DEVICE_REV_INDEX); + printk("SMSC SuperIO devid %02x rev %02x\n", devid, devrev); + + /* Select the keyboard device */ + SMSC_SUPERIO_WRITE_INDEXED(SMSC_KEYBOARD_DEVICE, SMCS_LOGICAL_DEV_INDEX); + + /* enable it */ + SMSC_SUPERIO_WRITE_INDEXED(1, SMSC_ACTIVATE_INDEX); + + /* Select the interrupts */ + /* On a PC keyboard is IRQ1, mouse is IRQ12 */ + SMSC_SUPERIO_WRITE_INDEXED(1, SMSC_PRIMARY_INT_INDEX); + SMSC_SUPERIO_WRITE_INDEXED(12, SMSC_SECONDARY_INT_INDEX); + +#ifdef CONFIG_IDE + /* + * Only IDE1 exists on the Cayman + */ + + /* Power it on */ + SMSC_SUPERIO_WRITE_INDEXED(1 << SMSC_IDE1_DEVICE, 0x22); + + SMSC_SUPERIO_WRITE_INDEXED(SMSC_IDE1_DEVICE, SMCS_LOGICAL_DEV_INDEX); + SMSC_SUPERIO_WRITE_INDEXED(1, SMSC_ACTIVATE_INDEX); + + SMSC_SUPERIO_WRITE_INDEXED(IDE1_PRIMARY_BASE >> 8, + SMSC_PRIMARY_BASE_INDEX + 0); + SMSC_SUPERIO_WRITE_INDEXED(IDE1_PRIMARY_BASE & 0xff, + SMSC_PRIMARY_BASE_INDEX + 1); + + SMSC_SUPERIO_WRITE_INDEXED(IDE1_SECONDARY_BASE >> 8, + SMSC_SECONDARY_BASE_INDEX + 0); + SMSC_SUPERIO_WRITE_INDEXED(IDE1_SECONDARY_BASE & 0xff, + SMSC_SECONDARY_BASE_INDEX + 1); + + SMSC_SUPERIO_WRITE_INDEXED(14, SMSC_PRIMARY_INT_INDEX); + + SMSC_SUPERIO_WRITE_INDEXED(SMSC_CONFIG_REGISTERS, + SMCS_LOGICAL_DEV_INDEX); + + SMSC_SUPERIO_WRITE_INDEXED(0x00, 0xc2); /* GP42 = nIDE1_OE */ + SMSC_SUPERIO_WRITE_INDEXED(0x01, 0xc5); /* GP45 = IDE1_IRQ */ + SMSC_SUPERIO_WRITE_INDEXED(0x00, 0xc6); /* GP46 = nIOROP */ + SMSC_SUPERIO_WRITE_INDEXED(0x00, 0xc7); /* GP47 = nIOWOP */ +#endif + + /* Exit the configuration state */ + outb(SMSC_EXIT_CONFIG_KEY, SMSC_CONFIG_PORT_ADDR); + + return 0; +} +__initcall(smsc_superio_setup); + +static void __iomem *cayman_ioport_map(unsigned long port, unsigned int len) +{ + if (port < 0x400) { + extern unsigned long smsc_superio_virt; + return (void __iomem *)((port << 2) | smsc_superio_virt); + } + + return (void __iomem *)port; +} + +extern void init_cayman_irq(void); + +static struct sh_machine_vector mv_cayman __initmv = { + .mv_name = "Hitachi Cayman", + .mv_nr_irqs = 64, + .mv_ioport_map = cayman_ioport_map, + .mv_init_irq = init_cayman_irq, +}; diff --git a/arch/sh/boards/mach-dreamcast/Makefile b/arch/sh/boards/mach-dreamcast/Makefile new file mode 100644 index 00000000000..7b97546c7e5 --- /dev/null +++ b/arch/sh/boards/mach-dreamcast/Makefile @@ -0,0 +1,6 @@ +# +# Makefile for the Sega Dreamcast specific parts of the kernel +# + +obj-y := setup.o irq.o rtc.o + diff --git a/arch/sh/boards/mach-dreamcast/irq.c b/arch/sh/boards/mach-dreamcast/irq.c new file mode 100644 index 00000000000..67bdc33dd41 --- /dev/null +++ b/arch/sh/boards/mach-dreamcast/irq.c @@ -0,0 +1,153 @@ +/* + * arch/sh/boards/dreamcast/irq.c + * + * Holly IRQ support for the Sega Dreamcast. + * + * Copyright (c) 2001, 2002 M. R. Brown + * + * This file is part of the LinuxDC project (www.linuxdc.org) + * Released under the terms of the GNU GPL v2.0 + */ + +#include +#include +#include +#include + +/* Dreamcast System ASIC Hardware Events - + + The Dreamcast's System ASIC (a.k.a. Holly) is responsible for receiving + hardware events from system peripherals and triggering an SH7750 IRQ. + Hardware events can trigger IRQs 13, 11, or 9 depending on which bits are + set in the Event Mask Registers (EMRs). When a hardware event is + triggered, it's corresponding bit in the Event Status Registers (ESRs) + is set, and that bit should be rewritten to the ESR to acknowledge that + event. + + There are three 32-bit ESRs located at 0xa05f8900 - 0xa05f6908. Event + types can be found in include/asm-sh/dreamcast/sysasic.h. There are three + groups of EMRs that parallel the ESRs. Each EMR group corresponds to an + IRQ, so 0xa05f6910 - 0xa05f6918 triggers IRQ 13, 0xa05f6920 - 0xa05f6928 + triggers IRQ 11, and 0xa05f6930 - 0xa05f6938 triggers IRQ 9. + + In the kernel, these events are mapped to virtual IRQs so that drivers can + respond to them as they would a normal interrupt. In order to keep this + mapping simple, the events are mapped as: + + 6900/6910 - Events 0-31, IRQ 13 + 6904/6924 - Events 32-63, IRQ 11 + 6908/6938 - Events 64-95, IRQ 9 + +*/ + +#define ESR_BASE 0x005f6900 /* Base event status register */ +#define EMR_BASE 0x005f6910 /* Base event mask register */ + +/* Helps us determine the EMR group that this event belongs to: 0 = 0x6910, + 1 = 0x6920, 2 = 0x6930; also determine the event offset */ +#define LEVEL(event) (((event) - HW_EVENT_IRQ_BASE) / 32) + +/* Return the hardware event's bit positon within the EMR/ESR */ +#define EVENT_BIT(event) (((event) - HW_EVENT_IRQ_BASE) & 31) + +/* For each of these *_irq routines, the IRQ passed in is the virtual IRQ + (logically mapped to the corresponding bit for the hardware event). */ + +/* Disable the hardware event by masking its bit in its EMR */ +static inline void disable_systemasic_irq(unsigned int irq) +{ + __u32 emr = EMR_BASE + (LEVEL(irq) << 4) + (LEVEL(irq) << 2); + __u32 mask; + + mask = inl(emr); + mask &= ~(1 << EVENT_BIT(irq)); + outl(mask, emr); +} + +/* Enable the hardware event by setting its bit in its EMR */ +static inline void enable_systemasic_irq(unsigned int irq) +{ + __u32 emr = EMR_BASE + (LEVEL(irq) << 4) + (LEVEL(irq) << 2); + __u32 mask; + + mask = inl(emr); + mask |= (1 << EVENT_BIT(irq)); + outl(mask, emr); +} + +/* Acknowledge a hardware event by writing its bit back to its ESR */ +static void ack_systemasic_irq(unsigned int irq) +{ + __u32 esr = ESR_BASE + (LEVEL(irq) << 2); + disable_systemasic_irq(irq); + outl((1 << EVENT_BIT(irq)), esr); +} + +/* After a IRQ has been ack'd and responded to, it needs to be renabled */ +static void end_systemasic_irq(unsigned int irq) +{ + if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS))) + enable_systemasic_irq(irq); +} + +static unsigned int startup_systemasic_irq(unsigned int irq) +{ + enable_systemasic_irq(irq); + + return 0; +} + +static void shutdown_systemasic_irq(unsigned int irq) +{ + disable_systemasic_irq(irq); +} + +struct hw_interrupt_type systemasic_int = { + .typename = "System ASIC", + .startup = startup_systemasic_irq, + .shutdown = shutdown_systemasic_irq, + .enable = enable_systemasic_irq, + .disable = disable_systemasic_irq, + .ack = ack_systemasic_irq, + .end = end_systemasic_irq, +}; + +/* + * Map the hardware event indicated by the processor IRQ to a virtual IRQ. + */ +int systemasic_irq_demux(int irq) +{ + __u32 emr, esr, status, level; + __u32 j, bit; + + switch (irq) { + case 13: + level = 0; + break; + case 11: + level = 1; + break; + case 9: + level = 2; + break; + default: + return irq; + } + emr = EMR_BASE + (level << 4) + (level << 2); + esr = ESR_BASE + (level << 2); + + /* Mask the ESR to filter any spurious, unwanted interrupts */ + status = inl(esr); + status &= inl(emr); + + /* Now scan and find the first set bit as the event to map */ + for (bit = 1, j = 0; j < 32; bit <<= 1, j++) { + if (status & bit) { + irq = HW_EVENT_IRQ_BASE + j + (level << 5); + return irq; + } + } + + /* Not reached */ + return irq; +} diff --git a/arch/sh/boards/mach-dreamcast/rtc.c b/arch/sh/boards/mach-dreamcast/rtc.c new file mode 100644 index 00000000000..a7433685798 --- /dev/null +++ b/arch/sh/boards/mach-dreamcast/rtc.c @@ -0,0 +1,81 @@ +/* + * arch/sh/boards/dreamcast/rtc.c + * + * Dreamcast AICA RTC routines. + * + * Copyright (c) 2001, 2002 M. R. Brown + * Copyright (c) 2002 Paul Mundt + * + * Released under the terms of the GNU GPL v2.0. + * + */ + +#include +#include +#include + +/* The AICA RTC has an Epoch of 1/1/1950, so we must subtract 20 years (in + seconds) to get the standard Unix Epoch when getting the time, and add + 20 years when setting the time. */ +#define TWENTY_YEARS ((20 * 365LU + 5) * 86400) + +/* The AICA RTC is represented by a 32-bit seconds counter stored in 2 16-bit + registers.*/ +#define AICA_RTC_SECS_H 0xa0710000 +#define AICA_RTC_SECS_L 0xa0710004 + +/** + * aica_rtc_gettimeofday - Get the time from the AICA RTC + * @ts: pointer to resulting timespec + * + * Grabs the current RTC seconds counter and adjusts it to the Unix Epoch. + */ +static void aica_rtc_gettimeofday(struct timespec *ts) +{ + unsigned long val1, val2; + + do { + val1 = ((ctrl_inl(AICA_RTC_SECS_H) & 0xffff) << 16) | + (ctrl_inl(AICA_RTC_SECS_L) & 0xffff); + + val2 = ((ctrl_inl(AICA_RTC_SECS_H) & 0xffff) << 16) | + (ctrl_inl(AICA_RTC_SECS_L) & 0xffff); + } while (val1 != val2); + + ts->tv_sec = val1 - TWENTY_YEARS; + + /* Can't get nanoseconds with just a seconds counter. */ + ts->tv_nsec = 0; +} + +/** + * aica_rtc_settimeofday - Set the AICA RTC to the current time + * @secs: contains the time_t to set + * + * Adjusts the given @tv to the AICA Epoch and sets the RTC seconds counter. + */ +static int aica_rtc_settimeofday(const time_t secs) +{ + unsigned long val1, val2; + unsigned long adj = secs + TWENTY_YEARS; + + do { + ctrl_outl((adj & 0xffff0000) >> 16, AICA_RTC_SECS_H); + ctrl_outl((adj & 0xffff), AICA_RTC_SECS_L); + + val1 = ((ctrl_inl(AICA_RTC_SECS_H) & 0xffff) << 16) | + (ctrl_inl(AICA_RTC_SECS_L) & 0xffff); + + val2 = ((ctrl_inl(AICA_RTC_SECS_H) & 0xffff) << 16) | + (ctrl_inl(AICA_RTC_SECS_L) & 0xffff); + } while (val1 != val2); + + return 0; +} + +void aica_time_init(void) +{ + rtc_sh_get_time = aica_rtc_gettimeofday; + rtc_sh_set_time = aica_rtc_settimeofday; +} + diff --git a/arch/sh/boards/mach-dreamcast/setup.c b/arch/sh/boards/mach-dreamcast/setup.c new file mode 100644 index 00000000000..7d944fc75e9 --- /dev/null +++ b/arch/sh/boards/mach-dreamcast/setup.c @@ -0,0 +1,64 @@ +/* + * arch/sh/boards/dreamcast/setup.c + * + * Hardware support for the Sega Dreamcast. + * + * Copyright (c) 2001, 2002 M. R. Brown + * Copyright (c) 2002, 2003, 2004 Paul Mundt + * + * This file is part of the LinuxDC project (www.linuxdc.org) + * + * Released under the terms of the GNU GPL v2.0. + * + * This file originally bore the message (with enclosed-$): + * Id: setup_dc.c,v 1.5 2001/05/24 05:09:16 mrbrown Exp + * SEGA Dreamcast support + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +extern struct hw_interrupt_type systemasic_int; +extern void aica_time_init(void); +extern int gapspci_init(void); +extern int systemasic_irq_demux(int); + +static void __init dreamcast_setup(char **cmdline_p) +{ + int i; + + /* Mask all hardware events */ + /* XXX */ + + /* Acknowledge any previous events */ + /* XXX */ + + __set_io_port_base(0xa0000000); + + /* Assign all virtual IRQs to the System ASIC int. handler */ + for (i = HW_EVENT_IRQ_BASE; i < HW_EVENT_IRQ_MAX; i++) + irq_desc[i].chip = &systemasic_int; + + board_time_init = aica_time_init; + +#ifdef CONFIG_PCI + if (gapspci_init() < 0) + printk(KERN_WARNING "GAPSPCI was not detected.\n"); +#endif +} + +static struct sh_machine_vector mv_dreamcast __initmv = { + .mv_name = "Sega Dreamcast", + .mv_setup = dreamcast_setup, + .mv_irq_demux = systemasic_irq_demux, +}; diff --git a/arch/sh/boards/mach-edosk7705/Makefile b/arch/sh/boards/mach-edosk7705/Makefile new file mode 100644 index 00000000000..14bdd531f11 --- /dev/null +++ b/arch/sh/boards/mach-edosk7705/Makefile @@ -0,0 +1,6 @@ +# +# Makefile for the EDOSK7705 specific parts of the kernel +# + +obj-y := setup.o io.o + diff --git a/arch/sh/boards/mach-edosk7705/io.c b/arch/sh/boards/mach-edosk7705/io.c new file mode 100644 index 00000000000..541cea2a652 --- /dev/null +++ b/arch/sh/boards/mach-edosk7705/io.c @@ -0,0 +1,94 @@ +/* + * arch/sh/boards/renesas/edosk7705/io.c + * + * Copyright (C) 2001 Ian da Silva, Jeremy Siegel + * Based largely on io_se.c. + * + * I/O routines for Hitachi EDOSK7705 board. + * + */ + +#include +#include +#include +#include +#include + +#define SMC_IOADDR 0xA2000000 + +#define maybebadio(name,port) \ + printk("bad PC-like io %s for port 0x%lx at 0x%08x\n", \ + #name, (port), (__u32) __builtin_return_address(0)) + +/* Map the Ethernet addresses as if it is at 0x300 - 0x320 */ +unsigned long sh_edosk7705_isa_port2addr(unsigned long port) +{ + if (port >= 0x300 && port < 0x320) { + /* SMC91C96 registers are 4 byte aligned rather than the + * usual 2 byte! + */ + return SMC_IOADDR + ( (port - 0x300) * 2); + } + + maybebadio(sh_edosk7705_isa_port2addr, port); + return port; +} + +/* Trying to read / write bytes on odd-byte boundaries to the Ethernet + * registers causes problems. So we bit-shift the value and read / write + * in 2 byte chunks. Setting the low byte to 0 does not cause problems + * now as odd byte writes are only made on the bit mask / interrupt + * register. This may not be the case in future Mar-2003 SJD + */ +unsigned char sh_edosk7705_inb(unsigned long port) +{ + if (port >= 0x300 && port < 0x320 && port & 0x01) { + return (volatile unsigned char)(generic_inw(port -1) >> 8); + } + return *(volatile unsigned char *)sh_edosk7705_isa_port2addr(port); +} + +unsigned int sh_edosk7705_inl(unsigned long port) +{ + return *(volatile unsigned long *)port; +} + +void sh_edosk7705_outb(unsigned char value, unsigned long port) +{ + if (port >= 0x300 && port < 0x320 && port & 0x01) { + generic_outw(((unsigned short)value << 8), port -1); + return; + } + *(volatile unsigned char *)sh_edosk7705_isa_port2addr(port) = value; +} + +void sh_edosk7705_outl(unsigned int value, unsigned long port) +{ + *(volatile unsigned long *)port = value; +} + +void sh_edosk7705_insb(unsigned long port, void *addr, unsigned long count) +{ + unsigned char *p = addr; + while (count--) *p++ = sh_edosk7705_inb(port); +} + +void sh_edosk7705_insl(unsigned long port, void *addr, unsigned long count) +{ + unsigned long *p = (unsigned long*)addr; + while (count--) + *p++ = *(volatile unsigned long *)port; +} + +void sh_edosk7705_outsb(unsigned long port, const void *addr, unsigned long count) +{ + unsigned char *p = (unsigned char*)addr; + while (count--) sh_edosk7705_outb(*p++, port); +} + +void sh_edosk7705_outsl(unsigned long port, const void *addr, unsigned long count) +{ + unsigned long *p = (unsigned long*)addr; + while (count--) sh_edosk7705_outl(*p++, port); +} + diff --git a/arch/sh/boards/mach-edosk7705/setup.c b/arch/sh/boards/mach-edosk7705/setup.c new file mode 100644 index 00000000000..f076c45308d --- /dev/null +++ b/arch/sh/boards/mach-edosk7705/setup.c @@ -0,0 +1,43 @@ +/* + * arch/sh/boards/renesas/edosk7705/setup.c + * + * Copyright (C) 2000 Kazumoto Kojima + * + * Hitachi SolutionEngine Support. + * + * Modified for edosk7705 development + * board by S. Dunn, 2003. + */ +#include +#include +#include + +static void __init sh_edosk7705_init_irq(void) +{ + /* This is the Ethernet interrupt */ + make_imask_irq(0x09); +} + +/* + * The Machine Vector + */ +static struct sh_machine_vector mv_edosk7705 __initmv = { + .mv_name = "EDOSK7705", + .mv_nr_irqs = 80, + + .mv_inb = sh_edosk7705_inb, + .mv_inl = sh_edosk7705_inl, + .mv_outb = sh_edosk7705_outb, + .mv_outl = sh_edosk7705_outl, + + .mv_inl_p = sh_edosk7705_inl, + .mv_outl_p = sh_edosk7705_outl, + + .mv_insb = sh_edosk7705_insb, + .mv_insl = sh_edosk7705_insl, + .mv_outsb = sh_edosk7705_outsb, + .mv_outsl = sh_edosk7705_outsl, + + .mv_isa_port2addr = sh_edosk7705_isa_port2addr, + .mv_init_irq = sh_edosk7705_init_irq, +}; diff --git a/arch/sh/boards/mach-highlander/Kconfig b/arch/sh/boards/mach-highlander/Kconfig new file mode 100644 index 00000000000..fc8f28e04ba --- /dev/null +++ b/arch/sh/boards/mach-highlander/Kconfig @@ -0,0 +1,24 @@ +if SH_HIGHLANDER + +choice + prompt "Highlander options" + default SH_R7780MP + +config SH_R7780RP + bool "R7780RP-1 board support" + depends on CPU_SUBTYPE_SH7780 + +config SH_R7780MP + bool "R7780MP board support" + depends on CPU_SUBTYPE_SH7780 + help + Selecting this option will enable support for the mass-production + version of the R7780RP. If in doubt, say Y. + +config SH_R7785RP + bool "R7785RP board support" + depends on CPU_SUBTYPE_SH7785 + +endchoice + +endif diff --git a/arch/sh/boards/mach-highlander/Makefile b/arch/sh/boards/mach-highlander/Makefile new file mode 100644 index 00000000000..20a10080b11 --- /dev/null +++ b/arch/sh/boards/mach-highlander/Makefile @@ -0,0 +1,11 @@ +# +# Makefile for the R7780RP-1 specific parts of the kernel +# +irqinit-$(CONFIG_SH_R7780MP) := irq-r7780mp.o +irqinit-$(CONFIG_SH_R7785RP) := irq-r7785rp.o +irqinit-$(CONFIG_SH_R7780RP) := irq-r7780rp.o +obj-y := setup.o $(irqinit-y) + +ifneq ($(CONFIG_SH_R7785RP),y) +obj-$(CONFIG_PUSH_SWITCH) += psw.o +endif diff --git a/arch/sh/boards/mach-highlander/irq-r7780mp.c b/arch/sh/boards/mach-highlander/irq-r7780mp.c new file mode 100644 index 00000000000..ae1cfcb2970 --- /dev/null +++ b/arch/sh/boards/mach-highlander/irq-r7780mp.c @@ -0,0 +1,74 @@ +/* + * Renesas Solutions Highlander R7780MP Support. + * + * Copyright (C) 2002 Atom Create Engineering Co., Ltd. + * Copyright (C) 2006 Paul Mundt + * Copyright (C) 2007 Magnus Damm + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include +#include +#include +#include + +enum { + UNUSED = 0, + + /* board specific interrupt sources */ + CF, /* Compact Flash */ + TP, /* Touch panel */ + SCIF1, /* FPGA SCIF1 */ + SCIF0, /* FPGA SCIF0 */ + SMBUS, /* SMBUS */ + RTC, /* RTC Alarm */ + AX88796, /* Ethernet controller */ + PSW, /* Push Switch */ + + /* external bus connector */ + EXT1, EXT2, EXT4, EXT5, EXT6, +}; + +static struct intc_vect vectors[] __initdata = { + INTC_IRQ(CF, IRQ_CF), + INTC_IRQ(TP, IRQ_TP), + INTC_IRQ(SCIF1, IRQ_SCIF1), + INTC_IRQ(SCIF0, IRQ_SCIF0), + INTC_IRQ(SMBUS, IRQ_SMBUS), + INTC_IRQ(RTC, IRQ_RTC), + INTC_IRQ(AX88796, IRQ_AX88796), + INTC_IRQ(PSW, IRQ_PSW), + + INTC_IRQ(EXT1, IRQ_EXT1), INTC_IRQ(EXT2, IRQ_EXT2), + INTC_IRQ(EXT4, IRQ_EXT4), INTC_IRQ(EXT5, IRQ_EXT5), + INTC_IRQ(EXT6, IRQ_EXT6), +}; + +static struct intc_mask_reg mask_registers[] __initdata = { + { 0xa4000000, 0, 16, /* IRLMSK */ + { SCIF0, SCIF1, RTC, 0, CF, 0, TP, SMBUS, + 0, EXT6, EXT5, EXT4, EXT2, EXT1, PSW, AX88796 } }, +}; + +static unsigned char irl2irq[HL_NR_IRL] __initdata = { + 0, IRQ_CF, IRQ_TP, IRQ_SCIF1, + IRQ_SCIF0, IRQ_SMBUS, IRQ_RTC, IRQ_EXT6, + IRQ_EXT5, IRQ_EXT4, IRQ_EXT2, IRQ_EXT1, + 0, IRQ_AX88796, IRQ_PSW, +}; + +static DECLARE_INTC_DESC(intc_desc, "r7780mp", vectors, + NULL, mask_registers, NULL, NULL); + +unsigned char * __init highlander_plat_irq_setup(void) +{ + if ((ctrl_inw(0xa4000700) & 0xf000) == 0x2000) { + printk(KERN_INFO "Using r7780mp interrupt controller.\n"); + register_intc_controller(&intc_desc); + return irl2irq; + } + + return NULL; +} diff --git a/arch/sh/boards/mach-highlander/irq-r7780rp.c b/arch/sh/boards/mach-highlander/irq-r7780rp.c new file mode 100644 index 00000000000..9d3921fe27c --- /dev/null +++ b/arch/sh/boards/mach-highlander/irq-r7780rp.c @@ -0,0 +1,67 @@ +/* + * Renesas Solutions Highlander R7780RP-1 Support. + * + * Copyright (C) 2002 Atom Create Engineering Co., Ltd. + * Copyright (C) 2006 Paul Mundt + * Copyright (C) 2008 Magnus Damm + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include +#include +#include +#include + +enum { + UNUSED = 0, + + /* board specific interrupt sources */ + + AX88796, /* Ethernet controller */ + PSW, /* Push Switch */ + CF, /* Compact Flash */ + + PCI_A, + PCI_B, + PCI_C, + PCI_D, +}; + +static struct intc_vect vectors[] __initdata = { + INTC_IRQ(PCI_A, 65), /* dirty: overwrite cpu vectors for pci */ + INTC_IRQ(PCI_B, 66), + INTC_IRQ(PCI_C, 67), + INTC_IRQ(PCI_D, 68), + INTC_IRQ(CF, IRQ_CF), + INTC_IRQ(PSW, IRQ_PSW), + INTC_IRQ(AX88796, IRQ_AX88796), +}; + +static struct intc_mask_reg mask_registers[] __initdata = { + { 0xa5000000, 0, 16, /* IRLMSK */ + { PCI_A, PCI_B, PCI_C, PCI_D, CF, 0, 0, 0, + 0, 0, 0, 0, 0, 0, PSW, AX88796 } }, +}; + +static unsigned char irl2irq[HL_NR_IRL] __initdata = { + 65, 66, 67, 68, + IRQ_CF, 0, 0, 0, + 0, 0, 0, 0, + IRQ_AX88796, IRQ_PSW +}; + +static DECLARE_INTC_DESC(intc_desc, "r7780rp", vectors, + NULL, mask_registers, NULL, NULL); + +unsigned char * __init highlander_plat_irq_setup(void) +{ + if (ctrl_inw(0xa5000600)) { + printk(KERN_INFO "Using r7780rp interrupt controller.\n"); + register_intc_controller(&intc_desc); + return irl2irq; + } + + return NULL; +} diff --git a/arch/sh/boards/mach-highlander/irq-r7785rp.c b/arch/sh/boards/mach-highlander/irq-r7785rp.c new file mode 100644 index 00000000000..896c045aa39 --- /dev/null +++ b/arch/sh/boards/mach-highlander/irq-r7785rp.c @@ -0,0 +1,86 @@ +/* + * Renesas Solutions Highlander R7785RP Support. + * + * Copyright (C) 2002 Atom Create Engineering Co., Ltd. + * Copyright (C) 2006 - 2008 Paul Mundt + * Copyright (C) 2007 Magnus Damm + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include +#include +#include +#include + +enum { + UNUSED = 0, + + /* FPGA specific interrupt sources */ + CF, /* Compact Flash */ + SMBUS, /* SMBUS */ + TP, /* Touch panel */ + RTC, /* RTC Alarm */ + TH_ALERT, /* Temperature sensor */ + AX88796, /* Ethernet controller */ + + /* external bus connector */ + EXT0, EXT1, EXT2, EXT3, EXT4, EXT5, EXT6, EXT7, +}; + +static struct intc_vect vectors[] __initdata = { + INTC_IRQ(CF, IRQ_CF), + INTC_IRQ(SMBUS, IRQ_SMBUS), + INTC_IRQ(TP, IRQ_TP), + INTC_IRQ(RTC, IRQ_RTC), + INTC_IRQ(TH_ALERT, IRQ_TH_ALERT), + + INTC_IRQ(EXT0, IRQ_EXT0), INTC_IRQ(EXT1, IRQ_EXT1), + INTC_IRQ(EXT2, IRQ_EXT2), INTC_IRQ(EXT3, IRQ_EXT3), + + INTC_IRQ(EXT4, IRQ_EXT4), INTC_IRQ(EXT5, IRQ_EXT5), + INTC_IRQ(EXT6, IRQ_EXT6), INTC_IRQ(EXT7, IRQ_EXT7), + + INTC_IRQ(AX88796, IRQ_AX88796), +}; + +static struct intc_mask_reg mask_registers[] __initdata = { + { 0xa4000010, 0, 16, /* IRLMCR1 */ + { 0, 0, 0, 0, CF, AX88796, SMBUS, TP, + RTC, 0, TH_ALERT, 0, 0, 0, 0, 0 } }, + { 0xa4000012, 0, 16, /* IRLMCR2 */ + { 0, 0, 0, 0, 0, 0, 0, 0, + EXT7, EXT6, EXT5, EXT4, EXT3, EXT2, EXT1, EXT0 } }, +}; + +static unsigned char irl2irq[HL_NR_IRL] __initdata = { + 0, IRQ_CF, IRQ_EXT4, IRQ_EXT5, + IRQ_EXT6, IRQ_EXT7, IRQ_SMBUS, IRQ_TP, + IRQ_RTC, IRQ_TH_ALERT, IRQ_AX88796, IRQ_EXT0, + IRQ_EXT1, IRQ_EXT2, IRQ_EXT3, +}; + +static DECLARE_INTC_DESC(intc_desc, "r7785rp", vectors, + NULL, mask_registers, NULL, NULL); + +unsigned char * __init highlander_plat_irq_setup(void) +{ + if ((ctrl_inw(0xa4000158) & 0xf000) != 0x1000) + return NULL; + + printk(KERN_INFO "Using r7785rp interrupt controller.\n"); + + ctrl_outw(0x0000, PA_IRLSSR1); /* FPGA IRLSSR1(CF_CD clear) */ + + /* Setup the FPGA IRL */ + ctrl_outw(0x0000, PA_IRLPRA); /* FPGA IRLA */ + ctrl_outw(0xe598, PA_IRLPRB); /* FPGA IRLB */ + ctrl_outw(0x7060, PA_IRLPRC); /* FPGA IRLC */ + ctrl_outw(0x0000, PA_IRLPRD); /* FPGA IRLD */ + ctrl_outw(0x4321, PA_IRLPRE); /* FPGA IRLE */ + ctrl_outw(0xdcba, PA_IRLPRF); /* FPGA IRLF */ + + register_intc_controller(&intc_desc); + return irl2irq; +} diff --git a/arch/sh/boards/mach-highlander/psw.c b/arch/sh/boards/mach-highlander/psw.c new file mode 100644 index 00000000000..0b3e062e96c --- /dev/null +++ b/arch/sh/boards/mach-highlander/psw.c @@ -0,0 +1,122 @@ +/* + * arch/sh/boards/renesas/r7780rp/psw.c + * + * push switch support for RDBRP-1/RDBREVRP-1 debug boards. + * + * Copyright (C) 2006 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include +#include +#include +#include +#include +#include + +static irqreturn_t psw_irq_handler(int irq, void *arg) +{ + struct platform_device *pdev = arg; + struct push_switch *psw = platform_get_drvdata(pdev); + struct push_switch_platform_info *psw_info = pdev->dev.platform_data; + unsigned int l, mask; + int ret = 0; + + l = ctrl_inw(PA_DBSW); + + /* Nothing to do if there's no state change */ + if (psw->state) { + ret = 1; + goto out; + } + + mask = l & 0x70; + /* Figure out who raised it */ + if (mask & (1 << psw_info->bit)) { + psw->state = !!(mask & (1 << psw_info->bit)); + if (psw->state) /* debounce */ + mod_timer(&psw->debounce, jiffies + 50); + + ret = 1; + } + +out: + /* Clear the switch IRQs */ + l |= (0x7 << 12); + ctrl_outw(l, PA_DBSW); + + return IRQ_RETVAL(ret); +} + +static struct resource psw_resources[] = { + [0] = { + .start = IRQ_PSW, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct push_switch_platform_info s2_platform_data = { + .name = "s2", + .bit = 6, + .irq_flags = IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING | + IRQF_SHARED, + .irq_handler = psw_irq_handler, +}; + +static struct platform_device s2_switch_device = { + .name = "push-switch", + .id = 0, + .num_resources = ARRAY_SIZE(psw_resources), + .resource = psw_resources, + .dev = { + .platform_data = &s2_platform_data, + }, +}; + +static struct push_switch_platform_info s3_platform_data = { + .name = "s3", + .bit = 5, + .irq_flags = IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING | + IRQF_SHARED, + .irq_handler = psw_irq_handler, +}; + +static struct platform_device s3_switch_device = { + .name = "push-switch", + .id = 1, + .num_resources = ARRAY_SIZE(psw_resources), + .resource = psw_resources, + .dev = { + .platform_data = &s3_platform_data, + }, +}; + +static struct push_switch_platform_info s4_platform_data = { + .name = "s4", + .bit = 4, + .irq_flags = IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING | + IRQF_SHARED, + .irq_handler = psw_irq_handler, +}; + +static struct platform_device s4_switch_device = { + .name = "push-switch", + .id = 2, + .num_resources = ARRAY_SIZE(psw_resources), + .resource = psw_resources, + .dev = { + .platform_data = &s4_platform_data, + }, +}; + +static struct platform_device *psw_devices[] = { + &s2_switch_device, &s3_switch_device, &s4_switch_device, +}; + +static int __init psw_init(void) +{ + return platform_add_devices(psw_devices, ARRAY_SIZE(psw_devices)); +} +module_init(psw_init); diff --git a/arch/sh/boards/mach-highlander/setup.c b/arch/sh/boards/mach-highlander/setup.c new file mode 100644 index 00000000000..bc79afb6fc4 --- /dev/null +++ b/arch/sh/boards/mach-highlander/setup.c @@ -0,0 +1,345 @@ +/* + * arch/sh/boards/renesas/r7780rp/setup.c + * + * Renesas Solutions Highlander Support. + * + * Copyright (C) 2002 Atom Create Engineering Co., Ltd. + * Copyright (C) 2005 - 2008 Paul Mundt + * + * This contains support for the R7780RP-1, R7780MP, and R7785RP + * Highlander modules. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +static struct resource r8a66597_usb_host_resources[] = { + [0] = { + .name = "r8a66597_hcd", + .start = 0xA4200000, + .end = 0xA42000FF, + .flags = IORESOURCE_MEM, + }, + [1] = { + .name = "r8a66597_hcd", + .start = IRQ_EXT1, /* irq number */ + .end = IRQ_EXT1, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device r8a66597_usb_host_device = { + .name = "r8a66597_hcd", + .id = -1, + .dev = { + .dma_mask = NULL, /* don't use dma */ + .coherent_dma_mask = 0xffffffff, + }, + .num_resources = ARRAY_SIZE(r8a66597_usb_host_resources), + .resource = r8a66597_usb_host_resources, +}; + +static struct resource m66592_usb_peripheral_resources[] = { + [0] = { + .name = "m66592_udc", + .start = 0xb0000000, + .end = 0xb00000FF, + .flags = IORESOURCE_MEM, + }, + [1] = { + .name = "m66592_udc", + .start = IRQ_EXT4, /* irq number */ + .end = IRQ_EXT4, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device m66592_usb_peripheral_device = { + .name = "m66592_udc", + .id = -1, + .dev = { + .dma_mask = NULL, /* don't use dma */ + .coherent_dma_mask = 0xffffffff, + }, + .num_resources = ARRAY_SIZE(m66592_usb_peripheral_resources), + .resource = m66592_usb_peripheral_resources, +}; + +static struct resource cf_ide_resources[] = { + [0] = { + .start = PA_AREA5_IO + 0x1000, + .end = PA_AREA5_IO + 0x1000 + 0x08 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = PA_AREA5_IO + 0x80c, + .end = PA_AREA5_IO + 0x80c + 0x16 - 1, + .flags = IORESOURCE_MEM, + }, + [2] = { + .start = IRQ_CF, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct pata_platform_info pata_info = { + .ioport_shift = 1, +}; + +static struct platform_device cf_ide_device = { + .name = "pata_platform", + .id = -1, + .num_resources = ARRAY_SIZE(cf_ide_resources), + .resource = cf_ide_resources, + .dev = { + .platform_data = &pata_info, + }, +}; + +static struct resource heartbeat_resources[] = { + [0] = { + .start = PA_OBLED, + .end = PA_OBLED, + .flags = IORESOURCE_MEM, + }, +}; + +#ifndef CONFIG_SH_R7785RP +static unsigned char heartbeat_bit_pos[] = { 2, 1, 0, 3, 6, 5, 4, 7 }; + +static struct heartbeat_data heartbeat_data = { + .bit_pos = heartbeat_bit_pos, + .nr_bits = ARRAY_SIZE(heartbeat_bit_pos), +}; +#endif + +static struct platform_device heartbeat_device = { + .name = "heartbeat", + .id = -1, + + /* R7785RP has a slightly more sensible FPGA.. */ +#ifndef CONFIG_SH_R7785RP + .dev = { + .platform_data = &heartbeat_data, + }, +#endif + .num_resources = ARRAY_SIZE(heartbeat_resources), + .resource = heartbeat_resources, +}; + +static struct ax_plat_data ax88796_platdata = { + .flags = AXFLG_HAS_93CX6, + .wordlength = 2, + .dcr_val = 0x1, + .rcr_val = 0x40, +}; + +static struct resource ax88796_resources[] = { + { +#ifdef CONFIG_SH_R7780RP + .start = 0xa5800400, + .end = 0xa5800400 + (0x20 * 0x2) - 1, +#else + .start = 0xa4100400, + .end = 0xa4100400 + (0x20 * 0x2) - 1, +#endif + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_AX88796, + .end = IRQ_AX88796, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device ax88796_device = { + .name = "ax88796", + .id = 0, + + .dev = { + .platform_data = &ax88796_platdata, + }, + + .num_resources = ARRAY_SIZE(ax88796_resources), + .resource = ax88796_resources, +}; + +static struct resource smbus_resources[] = { + [0] = { + .start = PA_SMCR, + .end = PA_SMCR + 0x100 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_SMBUS, + .end = IRQ_SMBUS, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device smbus_device = { + .name = "i2c-highlander", + .id = 0, + .num_resources = ARRAY_SIZE(smbus_resources), + .resource = smbus_resources, +}; + +static struct i2c_board_info __initdata highlander_i2c_devices[] = { + { + I2C_BOARD_INFO("r2025sd", 0x32), + }, +}; + +static struct platform_device *r7780rp_devices[] __initdata = { + &r8a66597_usb_host_device, + &m66592_usb_peripheral_device, + &heartbeat_device, + &smbus_device, +#ifndef CONFIG_SH_R7780RP + &ax88796_device, +#endif +}; + +/* + * The CF is connected using a 16-bit bus where 8-bit operations are + * unsupported. The linux ata driver is however using 8-bit operations, so + * insert a trapped io filter to convert 8-bit operations into 16-bit. + */ +static struct trapped_io cf_trapped_io = { + .resource = cf_ide_resources, + .num_resources = 2, + .minimum_bus_width = 16, +}; + +static int __init r7780rp_devices_setup(void) +{ + int ret = 0; + +#ifndef CONFIG_SH_R7780RP + if (register_trapped_io(&cf_trapped_io) == 0) + ret |= platform_device_register(&cf_ide_device); +#endif + + ret |= platform_add_devices(r7780rp_devices, + ARRAY_SIZE(r7780rp_devices)); + + ret |= i2c_register_board_info(0, highlander_i2c_devices, + ARRAY_SIZE(highlander_i2c_devices)); + + return ret; +} +device_initcall(r7780rp_devices_setup); + +/* + * Platform specific clocks + */ +static void ivdr_clk_enable(struct clk *clk) +{ + ctrl_outw(ctrl_inw(PA_IVDRCTL) | (1 << IVDR_CK_ON), PA_IVDRCTL); +} + +static void ivdr_clk_disable(struct clk *clk) +{ + ctrl_outw(ctrl_inw(PA_IVDRCTL) & ~(1 << IVDR_CK_ON), PA_IVDRCTL); +} + +static struct clk_ops ivdr_clk_ops = { + .enable = ivdr_clk_enable, + .disable = ivdr_clk_disable, +}; + +static struct clk ivdr_clk = { + .name = "ivdr_clk", + .ops = &ivdr_clk_ops, +}; + +static struct clk *r7780rp_clocks[] = { + &ivdr_clk, +}; + +static void r7780rp_power_off(void) +{ + if (mach_is_r7780mp() || mach_is_r7785rp()) + ctrl_outw(0x0001, PA_POFF); +} + +/* + * Initialize the board + */ +static void __init highlander_setup(char **cmdline_p) +{ + u16 ver = ctrl_inw(PA_VERREG); + int i; + + printk(KERN_INFO "Renesas Solutions Highlander %s support.\n", + mach_is_r7780rp() ? "R7780RP-1" : + mach_is_r7780mp() ? "R7780MP" : + "R7785RP"); + + printk(KERN_INFO "Board version: %d (revision %d), " + "FPGA version: %d (revision %d)\n", + (ver >> 12) & 0xf, (ver >> 8) & 0xf, + (ver >> 4) & 0xf, ver & 0xf); + + /* + * Enable the important clocks right away.. + */ + for (i = 0; i < ARRAY_SIZE(r7780rp_clocks); i++) { + struct clk *clk = r7780rp_clocks[i]; + + clk_register(clk); + clk_enable(clk); + } + + ctrl_outw(0x0000, PA_OBLED); /* Clear LED. */ + + if (mach_is_r7780rp()) + ctrl_outw(0x0001, PA_SDPOW); /* SD Power ON */ + + ctrl_outw(ctrl_inw(PA_IVDRCTL) | 0x01, PA_IVDRCTL); /* Si13112 */ + + pm_power_off = r7780rp_power_off; +} + +static unsigned char irl2irq[HL_NR_IRL]; + +static int highlander_irq_demux(int irq) +{ + if (irq >= HL_NR_IRL || !irl2irq[irq]) + return irq; + + return irl2irq[irq]; +} + +static void __init highlander_init_irq(void) +{ + unsigned char *ucp = highlander_plat_irq_setup(); + + if (ucp) { + plat_irq_setup_pins(IRQ_MODE_IRL3210); + memcpy(irl2irq, ucp, HL_NR_IRL); + } +} + +/* + * The Machine Vector + */ +static struct sh_machine_vector mv_highlander __initmv = { + .mv_name = "Highlander", + .mv_setup = highlander_setup, + .mv_init_irq = highlander_init_irq, + .mv_irq_demux = highlander_irq_demux, +}; diff --git a/arch/sh/boards/mach-hp6xx/Makefile b/arch/sh/boards/mach-hp6xx/Makefile new file mode 100644 index 00000000000..b3124278247 --- /dev/null +++ b/arch/sh/boards/mach-hp6xx/Makefile @@ -0,0 +1,7 @@ +# +# Makefile for the HP6xx specific parts of the kernel +# + +obj-y := setup.o +obj-$(CONFIG_PM) += pm.o pm_wakeup.o +obj-$(CONFIG_APM_EMULATION) += hp6xx_apm.o diff --git a/arch/sh/boards/mach-hp6xx/hp6xx_apm.c b/arch/sh/boards/mach-hp6xx/hp6xx_apm.c new file mode 100644 index 00000000000..177f4f028e0 --- /dev/null +++ b/arch/sh/boards/mach-hp6xx/hp6xx_apm.c @@ -0,0 +1,111 @@ +/* + * bios-less APM driver for hp680 + * + * Copyright 2005 (c) Andriy Skulysh + * Copyright 2008 (c) Kristoffer Ericson + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License. + */ +#include +#include +#include +#include +#include +#include +#include +#include + +/* percentage values */ +#define APM_CRITICAL 10 +#define APM_LOW 30 + +/* resonably sane values */ +#define HP680_BATTERY_MAX 898 +#define HP680_BATTERY_MIN 486 +#define HP680_BATTERY_AC_ON 1023 + +#define MODNAME "hp6x0_apm" + +#define PGDR 0xa400012c + +static void hp6x0_apm_get_power_status(struct apm_power_info *info) +{ + int battery, backup, charging, percentage; + u8 pgdr; + + battery = adc_single(ADC_CHANNEL_BATTERY); + backup = adc_single(ADC_CHANNEL_BACKUP); + charging = adc_single(ADC_CHANNEL_CHARGE); + + percentage = 100 * (battery - HP680_BATTERY_MIN) / + (HP680_BATTERY_MAX - HP680_BATTERY_MIN); + + /* % of full battery */ + info->battery_life = percentage; + + /* We want our estimates in minutes */ + info->units = 0; + + /* Extremely(!!) rough estimate, we will replace this with a datalist later on */ + info->time = (2 * battery); + + info->ac_line_status = (battery > HP680_BATTERY_AC_ON) ? + APM_AC_ONLINE : APM_AC_OFFLINE; + + pgdr = ctrl_inb(PGDR); + if (pgdr & PGDR_MAIN_BATTERY_OUT) { + info->battery_status = APM_BATTERY_STATUS_NOT_PRESENT; + info->battery_flag = 0x80; + } else if (charging < 8) { + info->battery_status = APM_BATTERY_STATUS_CHARGING; + info->battery_flag = 0x08; + info->ac_line_status = 0x01; + } else if (percentage <= APM_CRITICAL) { + info->battery_status = APM_BATTERY_STATUS_CRITICAL; + info->battery_flag = 0x04; + } else if (percentage <= APM_LOW) { + info->battery_status = APM_BATTERY_STATUS_LOW; + info->battery_flag = 0x02; + } else { + info->battery_status = APM_BATTERY_STATUS_HIGH; + info->battery_flag = 0x01; + } +} + +static irqreturn_t hp6x0_apm_interrupt(int irq, void *dev) +{ + if (!APM_DISABLED) + apm_queue_event(APM_USER_SUSPEND); + + return IRQ_HANDLED; +} + +static int __init hp6x0_apm_init(void) +{ + int ret; + + ret = request_irq(HP680_BTN_IRQ, hp6x0_apm_interrupt, + IRQF_DISABLED, MODNAME, NULL); + if (unlikely(ret < 0)) { + printk(KERN_ERR MODNAME ": IRQ %d request failed\n", + HP680_BTN_IRQ); + return ret; + } + + apm_get_power_status = hp6x0_apm_get_power_status; + + return ret; +} + +static void __exit hp6x0_apm_exit(void) +{ + free_irq(HP680_BTN_IRQ, 0); +} + +module_init(hp6x0_apm_init); +module_exit(hp6x0_apm_exit); + +MODULE_AUTHOR("Adriy Skulysh"); +MODULE_DESCRIPTION("hp6xx Advanced Power Management"); +MODULE_LICENSE("GPL"); diff --git a/arch/sh/boards/mach-hp6xx/pm.c b/arch/sh/boards/mach-hp6xx/pm.c new file mode 100644 index 00000000000..e96684def78 --- /dev/null +++ b/arch/sh/boards/mach-hp6xx/pm.c @@ -0,0 +1,81 @@ +/* + * hp6x0 Power Management Routines + * + * Copyright (c) 2006 Andriy Skulysh + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License. + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define STBCR 0xffffff82 +#define STBCR2 0xffffff88 + +static int hp6x0_pm_enter(suspend_state_t state) +{ + u8 stbcr, stbcr2; +#ifdef CONFIG_HD64461_ENABLER + u8 scr; + u16 hd64461_stbcr; +#endif + +#ifdef CONFIG_HD64461_ENABLER + outb(0, HD64461_PCC1CSCIER); + + scr = inb(HD64461_PCC1SCR); + scr |= HD64461_PCCSCR_VCC1; + outb(scr, HD64461_PCC1SCR); + + hd64461_stbcr = inw(HD64461_STBCR); + hd64461_stbcr |= HD64461_STBCR_SPC1ST; + outw(hd64461_stbcr, HD64461_STBCR); +#endif + + ctrl_outb(0x1f, DACR); + + stbcr = ctrl_inb(STBCR); + ctrl_outb(0x01, STBCR); + + stbcr2 = ctrl_inb(STBCR2); + ctrl_outb(0x7f , STBCR2); + + outw(0xf07f, HD64461_SCPUCR); + + pm_enter(); + + outw(0, HD64461_SCPUCR); + ctrl_outb(stbcr, STBCR); + ctrl_outb(stbcr2, STBCR2); + +#ifdef CONFIG_HD64461_ENABLER + hd64461_stbcr = inw(HD64461_STBCR); + hd64461_stbcr &= ~HD64461_STBCR_SPC1ST; + outw(hd64461_stbcr, HD64461_STBCR); + + outb(0x4c, HD64461_PCC1CSCIER); + outb(0x00, HD64461_PCC1CSCR); +#endif + + return 0; +} + +static struct platform_suspend_ops hp6x0_pm_ops = { + .enter = hp6x0_pm_enter, + .valid = suspend_valid_only_mem, +}; + +static int __init hp6x0_pm_init(void) +{ + suspend_set_ops(&hp6x0_pm_ops); + return 0; +} + +late_initcall(hp6x0_pm_init); diff --git a/arch/sh/boards/mach-hp6xx/pm_wakeup.S b/arch/sh/boards/mach-hp6xx/pm_wakeup.S new file mode 100644 index 00000000000..44b648cf6f2 --- /dev/null +++ b/arch/sh/boards/mach-hp6xx/pm_wakeup.S @@ -0,0 +1,58 @@ +/* + * Copyright (c) 2006 Andriy Skulysh + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + */ + +#include +#include + +#define k0 r0 +#define k1 r1 +#define k2 r2 +#define k3 r3 +#define k4 r4 + +/* + * Kernel mode register usage: + * k0 scratch + * k1 scratch + * k2 scratch (Exception code) + * k3 scratch (Return address) + * k4 scratch + * k5 reserved + * k6 Global Interrupt Mask (0--15 << 4) + * k7 CURRENT_THREAD_INFO (pointer to current thread info) + */ + +ENTRY(wakeup_start) +! clear STBY bit + mov #-126, k2 + and #127, k0 + mov.b k0, @k2 +! enable refresh + mov.l 5f, k1 + mov.w 6f, k0 + mov.w k0, @k1 +! jump to handler + mov.l 2f, k2 + mov.l 3f, k3 + mov.l @k2, k2 + + mov.l 4f, k1 + jmp @k1 + nop + + .align 2 +1: .long EXPEVT +2: .long INTEVT +3: .long ret_from_irq +4: .long handle_exception +5: .long 0xffffff68 +6: .word 0x0524 + +ENTRY(wakeup_end) + nop diff --git a/arch/sh/boards/mach-hp6xx/setup.c b/arch/sh/boards/mach-hp6xx/setup.c new file mode 100644 index 00000000000..475b46caec1 --- /dev/null +++ b/arch/sh/boards/mach-hp6xx/setup.c @@ -0,0 +1,121 @@ +/* + * linux/arch/sh/boards/hp6xx/setup.c + * + * Copyright (C) 2002 Andriy Skulysh + * Copyright (C) 2007 Kristoffer Ericson + * + * May be copied or modified under the terms of the GNU General Public + * License. See linux/COPYING for more information. + * + * Setup code for HP620/HP660/HP680/HP690 (internal peripherials only) + */ +#include +#include +#include +#include +#include +#include +#include +#include + +#define SCPCR 0xa4000116 +#define SCPDR 0xa4000136 + +/* CF Slot */ +static struct resource cf_ide_resources[] = { + [0] = { + .start = 0x15000000 + 0x1f0, + .end = 0x15000000 + 0x1f0 + 0x08 - 0x01, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 0x15000000 + 0x1fe, + .end = 0x15000000 + 0x1fe + 0x01, + .flags = IORESOURCE_MEM, + }, + [2] = { + .start = 77, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device cf_ide_device = { + .name = "pata_platform", + .id = -1, + .num_resources = ARRAY_SIZE(cf_ide_resources), + .resource = cf_ide_resources, +}; + +static struct platform_device jornadakbd_device = { + .name = "jornada680_kbd", + .id = -1, +}; + +static struct platform_device *hp6xx_devices[] __initdata = { + &cf_ide_device, + &jornadakbd_device, +}; + +static void __init hp6xx_init_irq(void) +{ + /* Gets touchscreen and powerbutton IRQ working */ + plat_irq_setup_pins(IRQ_MODE_IRQ); +} + +static int __init hp6xx_devices_setup(void) +{ + return platform_add_devices(hp6xx_devices, ARRAY_SIZE(hp6xx_devices)); +} + +static void __init hp6xx_setup(char **cmdline_p) +{ + u8 v8; + u16 v; + + v = inw(HD64461_STBCR); + v |= HD64461_STBCR_SURTST | HD64461_STBCR_SIRST | + HD64461_STBCR_STM1ST | HD64461_STBCR_STM0ST | + HD64461_STBCR_SAFEST | HD64461_STBCR_SPC0ST | + HD64461_STBCR_SMIAST | HD64461_STBCR_SAFECKE_OST| + HD64461_STBCR_SAFECKE_IST; +#ifndef CONFIG_HD64461_ENABLER + v |= HD64461_STBCR_SPC1ST; +#endif + outw(v, HD64461_STBCR); + v = inw(HD64461_GPADR); + v |= HD64461_GPADR_SPEAKER | HD64461_GPADR_PCMCIA0; + outw(v, HD64461_GPADR); + + outw(HD64461_PCCGCR_VCC0 | HD64461_PCCSCR_VCC1, HD64461_PCC0GCR); + +#ifndef CONFIG_HD64461_ENABLER + outw(HD64461_PCCGCR_VCC0 | HD64461_PCCSCR_VCC1, HD64461_PCC1GCR); +#endif + + sh_dac_output(0, DAC_SPEAKER_VOLUME); + sh_dac_disable(DAC_SPEAKER_VOLUME); + v8 = ctrl_inb(DACR); + v8 &= ~DACR_DAE; + ctrl_outb(v8,DACR); + + v8 = ctrl_inb(SCPDR); + v8 |= SCPDR_TS_SCAN_X | SCPDR_TS_SCAN_Y; + v8 &= ~SCPDR_TS_SCAN_ENABLE; + ctrl_outb(v8, SCPDR); + + v = ctrl_inw(SCPCR); + v &= ~SCPCR_TS_MASK; + v |= SCPCR_TS_ENABLE; + ctrl_outw(v, SCPCR); +} +device_initcall(hp6xx_devices_setup); + +static struct sh_machine_vector mv_hp6xx __initmv = { + .mv_name = "hp6xx", + .mv_setup = hp6xx_setup, + /* IRQ's : CPU(64) + CCHIP(16) + FREE_TO_USE(6) */ + .mv_nr_irqs = HD64461_IRQBASE + HD64461_IRQ_NUM + 6, + .mv_irq_demux = hd64461_irq_demux, + /* Enable IRQ0 -> IRQ3 in IRQ_MODE */ + .mv_init_irq = hp6xx_init_irq, +}; diff --git a/arch/sh/boards/mach-landisk/Makefile b/arch/sh/boards/mach-landisk/Makefile new file mode 100644 index 00000000000..a696b4277fa --- /dev/null +++ b/arch/sh/boards/mach-landisk/Makefile @@ -0,0 +1,5 @@ +# +# Makefile for I-O DATA DEVICE, INC. "LANDISK Series" +# + +obj-y := setup.o irq.o psw.o gio.o diff --git a/arch/sh/boards/mach-landisk/gio.c b/arch/sh/boards/mach-landisk/gio.c new file mode 100644 index 00000000000..edcde082032 --- /dev/null +++ b/arch/sh/boards/mach-landisk/gio.c @@ -0,0 +1,171 @@ +/* + * arch/sh/boards/landisk/gio.c - driver for landisk + * + * This driver will also support the I-O DATA Device, Inc. LANDISK Board. + * LANDISK and USL-5P Button, LED and GIO driver drive function. + * + * Copylight (C) 2006 kogiidena + * Copylight (C) 2002 Atom Create Engineering Co., Ltd. * + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define DEVCOUNT 4 +#define GIO_MINOR 2 /* GIO minor no. */ + +static dev_t dev; +static struct cdev *cdev_p; +static int openCnt; + +static int gio_open(struct inode *inode, struct file *filp) +{ + int minor; + int ret = -ENOENT; + + lock_kernel(); + minor = MINOR(inode->i_rdev); + if (minor < DEVCOUNT) { + if (openCnt > 0) { + ret = -EALREADY; + } else { + openCnt++; + ret = 0; + } + } + unlock_kernel(); + return ret; +} + +static int gio_close(struct inode *inode, struct file *filp) +{ + int minor; + + minor = MINOR(inode->i_rdev); + if (minor < DEVCOUNT) { + openCnt--; + } + return 0; +} + +static int gio_ioctl(struct inode *inode, struct file *filp, + unsigned int cmd, unsigned long arg) +{ + unsigned int data; + static unsigned int addr = 0; + + if (cmd & 0x01) { /* write */ + if (copy_from_user(&data, (int *)arg, sizeof(int))) { + return -EFAULT; + } + } + + switch (cmd) { + case GIODRV_IOCSGIOSETADDR: /* address set */ + addr = data; + break; + + case GIODRV_IOCSGIODATA1: /* write byte */ + ctrl_outb((unsigned char)(0x0ff & data), addr); + break; + + case GIODRV_IOCSGIODATA2: /* write word */ + if (addr & 0x01) { + return -EFAULT; + } + ctrl_outw((unsigned short int)(0x0ffff & data), addr); + break; + + case GIODRV_IOCSGIODATA4: /* write long */ + if (addr & 0x03) { + return -EFAULT; + } + ctrl_outl(data, addr); + break; + + case GIODRV_IOCGGIODATA1: /* read byte */ + data = ctrl_inb(addr); + break; + + case GIODRV_IOCGGIODATA2: /* read word */ + if (addr & 0x01) { + return -EFAULT; + } + data = ctrl_inw(addr); + break; + + case GIODRV_IOCGGIODATA4: /* read long */ + if (addr & 0x03) { + return -EFAULT; + } + data = ctrl_inl(addr); + break; + default: + return -EFAULT; + break; + } + + if ((cmd & 0x01) == 0) { /* read */ + if (copy_to_user((int *)arg, &data, sizeof(int))) { + return -EFAULT; + } + } + return 0; +} + +static const struct file_operations gio_fops = { + .owner = THIS_MODULE, + .open = gio_open, /* open */ + .release = gio_close, /* release */ + .ioctl = gio_ioctl, /* ioctl */ +}; + +static int __init gio_init(void) +{ + int error; + + printk(KERN_INFO "gio: driver initialized\n"); + + openCnt = 0; + + if ((error = alloc_chrdev_region(&dev, 0, DEVCOUNT, "gio")) < 0) { + printk(KERN_ERR + "gio: Couldn't alloc_chrdev_region, error=%d\n", + error); + return 1; + } + + cdev_p = cdev_alloc(); + cdev_p->ops = &gio_fops; + error = cdev_add(cdev_p, dev, DEVCOUNT); + if (error) { + printk(KERN_ERR + "gio: Couldn't cdev_add, error=%d\n", error); + return 1; + } + + return 0; +} + +static void __exit gio_exit(void) +{ + cdev_del(cdev_p); + unregister_chrdev_region(dev, DEVCOUNT); +} + +module_init(gio_init); +module_exit(gio_exit); + +MODULE_LICENSE("GPL"); diff --git a/arch/sh/boards/mach-landisk/irq.c b/arch/sh/boards/mach-landisk/irq.c new file mode 100644 index 00000000000..d0f9378f6ff --- /dev/null +++ b/arch/sh/boards/mach-landisk/irq.c @@ -0,0 +1,56 @@ +/* + * arch/sh/boards/landisk/irq.c + * + * I-O DATA Device, Inc. LANDISK Support + * + * Copyright (C) 2005-2007 kogiidena + * + * Copyright (C) 2001 Ian da Silva, Jeremy Siegel + * Based largely on io_se.c. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include +#include +#include +#include +#include + +static void disable_landisk_irq(unsigned int irq) +{ + unsigned char mask = 0xff ^ (0x01 << (irq - 5)); + + ctrl_outb(ctrl_inb(PA_IMASK) & mask, PA_IMASK); +} + +static void enable_landisk_irq(unsigned int irq) +{ + unsigned char value = (0x01 << (irq - 5)); + + ctrl_outb(ctrl_inb(PA_IMASK) | value, PA_IMASK); +} + +static struct irq_chip landisk_irq_chip __read_mostly = { + .name = "LANDISK", + .mask = disable_landisk_irq, + .unmask = enable_landisk_irq, + .mask_ack = disable_landisk_irq, +}; + +/* + * Initialize IRQ setting + */ +void __init init_landisk_IRQ(void) +{ + int i; + + for (i = 5; i < 14; i++) { + disable_irq_nosync(i); + set_irq_chip_and_handler_name(i, &landisk_irq_chip, + handle_level_irq, "level"); + enable_landisk_irq(i); + } + ctrl_outb(0x00, PA_PWRINT_CLR); +} diff --git a/arch/sh/boards/mach-landisk/psw.c b/arch/sh/boards/mach-landisk/psw.c new file mode 100644 index 00000000000..4bd502cbaee --- /dev/null +++ b/arch/sh/boards/mach-landisk/psw.c @@ -0,0 +1,143 @@ +/* + * arch/sh/boards/landisk/psw.c + * + * push switch support for LANDISK and USL-5P + * + * Copyright (C) 2006-2007 Paul Mundt + * Copyright (C) 2007 kogiidena + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include +#include +#include +#include +#include +#include + +static irqreturn_t psw_irq_handler(int irq, void *arg) +{ + struct platform_device *pdev = arg; + struct push_switch *psw = platform_get_drvdata(pdev); + struct push_switch_platform_info *psw_info = pdev->dev.platform_data; + unsigned int sw_value; + int ret = 0; + + sw_value = (0x0ff & (~ctrl_inb(PA_STATUS))); + + /* Nothing to do if there's no state change */ + if (psw->state) { + ret = 1; + goto out; + } + + /* Figure out who raised it */ + if (sw_value & (1 << psw_info->bit)) { + psw->state = 1; + mod_timer(&psw->debounce, jiffies + 50); + ret = 1; + } + +out: + /* Clear the switch IRQs */ + ctrl_outb(0x00, PA_PWRINT_CLR); + + return IRQ_RETVAL(ret); +} + +static struct resource psw_power_resources[] = { + [0] = { + .start = IRQ_POWER, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct resource psw_usl5p_resources[] = { + [0] = { + .start = IRQ_BUTTON, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct push_switch_platform_info psw_power_platform_data = { + .name = "psw_power", + .bit = 4, + .irq_flags = IRQF_SHARED, + .irq_handler = psw_irq_handler, +}; + +static struct push_switch_platform_info psw1_platform_data = { + .name = "psw1", + .bit = 0, + .irq_flags = IRQF_SHARED, + .irq_handler = psw_irq_handler, +}; + +static struct push_switch_platform_info psw2_platform_data = { + .name = "psw2", + .bit = 2, + .irq_flags = IRQF_SHARED, + .irq_handler = psw_irq_handler, +}; + +static struct push_switch_platform_info psw3_platform_data = { + .name = "psw3", + .bit = 1, + .irq_flags = IRQF_SHARED, + .irq_handler = psw_irq_handler, +}; + +static struct platform_device psw_power_switch_device = { + .name = "push-switch", + .id = 0, + .num_resources = ARRAY_SIZE(psw_power_resources), + .resource = psw_power_resources, + .dev = { + .platform_data = &psw_power_platform_data, + }, +}; + +static struct platform_device psw1_switch_device = { + .name = "push-switch", + .id = 1, + .num_resources = ARRAY_SIZE(psw_usl5p_resources), + .resource = psw_usl5p_resources, + .dev = { + .platform_data = &psw1_platform_data, + }, +}; + +static struct platform_device psw2_switch_device = { + .name = "push-switch", + .id = 2, + .num_resources = ARRAY_SIZE(psw_usl5p_resources), + .resource = psw_usl5p_resources, + .dev = { + .platform_data = &psw2_platform_data, + }, +}; + +static struct platform_device psw3_switch_device = { + .name = "push-switch", + .id = 3, + .num_resources = ARRAY_SIZE(psw_usl5p_resources), + .resource = psw_usl5p_resources, + .dev = { + .platform_data = &psw3_platform_data, + }, +}; + +static struct platform_device *psw_devices[] = { + &psw_power_switch_device, + &psw1_switch_device, + &psw2_switch_device, + &psw3_switch_device, +}; + +static int __init psw_init(void) +{ + return platform_add_devices(psw_devices, ARRAY_SIZE(psw_devices)); +} +module_init(psw_init); diff --git a/arch/sh/boards/mach-landisk/setup.c b/arch/sh/boards/mach-landisk/setup.c new file mode 100644 index 00000000000..470c7811168 --- /dev/null +++ b/arch/sh/boards/mach-landisk/setup.c @@ -0,0 +1,105 @@ +/* + * arch/sh/boards/landisk/setup.c + * + * I-O DATA Device, Inc. LANDISK Support. + * + * Copyright (C) 2000 Kazumoto Kojima + * Copyright (C) 2002 Paul Mundt + * Copylight (C) 2002 Atom Create Engineering Co., Ltd. + * Copyright (C) 2005-2007 kogiidena + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include +#include +#include +#include +#include +#include +#include +#include + +void init_landisk_IRQ(void); + +static void landisk_power_off(void) +{ + ctrl_outb(0x01, PA_SHUTDOWN); +} + +static struct resource cf_ide_resources[3]; + +static struct pata_platform_info pata_info = { + .ioport_shift = 1, +}; + +static struct platform_device cf_ide_device = { + .name = "pata_platform", + .id = -1, + .num_resources = ARRAY_SIZE(cf_ide_resources), + .resource = cf_ide_resources, + .dev = { + .platform_data = &pata_info, + }, +}; + +static struct platform_device rtc_device = { + .name = "rs5c313", + .id = -1, +}; + +static struct platform_device *landisk_devices[] __initdata = { + &cf_ide_device, + &rtc_device, +}; + +static int __init landisk_devices_setup(void) +{ + pgprot_t prot; + unsigned long paddrbase; + void *cf_ide_base; + + /* open I/O area window */ + paddrbase = virt_to_phys((void *)PA_AREA5_IO); + prot = PAGE_KERNEL_PCC(1, _PAGE_PCC_IO16); + cf_ide_base = p3_ioremap(paddrbase, PAGE_SIZE, prot.pgprot); + if (!cf_ide_base) { + printk("allocate_cf_area : can't open CF I/O window!\n"); + return -ENOMEM; + } + + /* IDE cmd address : 0x1f0-0x1f7 and 0x3f6 */ + cf_ide_resources[0].start = (unsigned long)cf_ide_base + 0x40; + cf_ide_resources[0].end = (unsigned long)cf_ide_base + 0x40 + 0x0f; + cf_ide_resources[0].flags = IORESOURCE_IO; + cf_ide_resources[1].start = (unsigned long)cf_ide_base + 0x2c; + cf_ide_resources[1].end = (unsigned long)cf_ide_base + 0x2c + 0x03; + cf_ide_resources[1].flags = IORESOURCE_IO; + cf_ide_resources[2].start = IRQ_FATA; + cf_ide_resources[2].flags = IORESOURCE_IRQ; + + return platform_add_devices(landisk_devices, + ARRAY_SIZE(landisk_devices)); +} + +__initcall(landisk_devices_setup); + +static void __init landisk_setup(char **cmdline_p) +{ + /* LED ON */ + ctrl_outb(ctrl_inb(PA_LED) | 0x03, PA_LED); + + printk(KERN_INFO "I-O DATA DEVICE, INC. \"LANDISK Series\" support.\n"); + pm_power_off = landisk_power_off; +} + +/* + * The Machine Vector + */ +static struct sh_machine_vector mv_landisk __initmv = { + .mv_name = "LANDISK", + .mv_nr_irqs = 72, + .mv_setup = landisk_setup, + .mv_init_irq = init_landisk_IRQ, +}; diff --git a/arch/sh/boards/mach-lboxre2/Makefile b/arch/sh/boards/mach-lboxre2/Makefile new file mode 100644 index 00000000000..e9ed140c06f --- /dev/null +++ b/arch/sh/boards/mach-lboxre2/Makefile @@ -0,0 +1,5 @@ +# +# Makefile for the L-BOX RE2 specific parts of the kernel +# Copyright (c) 2007 Nobuhiro Iwamatsu + +obj-y := setup.o irq.o diff --git a/arch/sh/boards/mach-lboxre2/irq.c b/arch/sh/boards/mach-lboxre2/irq.c new file mode 100644 index 00000000000..5a1c3bbe7b5 --- /dev/null +++ b/arch/sh/boards/mach-lboxre2/irq.c @@ -0,0 +1,31 @@ +/* + * linux/arch/sh/boards/lboxre2/irq.c + * + * Copyright (C) 2007 Nobuhiro Iwamatsu + * + * NTT COMWARE L-BOX RE2 Support. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + */ +#include +#include +#include +#include +#include +#include + +/* + * Initialize IRQ setting + */ +void __init init_lboxre2_IRQ(void) +{ + make_imask_irq(IRQ_CF1); + make_imask_irq(IRQ_CF0); + make_imask_irq(IRQ_INTD); + make_imask_irq(IRQ_ETH1); + make_imask_irq(IRQ_ETH0); + make_imask_irq(IRQ_INTA); +} diff --git a/arch/sh/boards/mach-lboxre2/setup.c b/arch/sh/boards/mach-lboxre2/setup.c new file mode 100644 index 00000000000..c74440d38ee --- /dev/null +++ b/arch/sh/boards/mach-lboxre2/setup.c @@ -0,0 +1,84 @@ +/* + * linux/arch/sh/boards/lbox/setup.c + * + * Copyright (C) 2007 Nobuhiro Iwamatsu + * + * NTT COMWARE L-BOX RE2 Support + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + */ + +#include +#include +#include +#include +#include +#include +#include + +static struct resource cf_ide_resources[] = { + [0] = { + .start = 0x1f0, + .end = 0x1f0 + 8 , + .flags = IORESOURCE_IO, + }, + [1] = { + .start = 0x1f0 + 0x206, + .end = 0x1f0 +8 + 0x206 + 8, + .flags = IORESOURCE_IO, + }, + [2] = { + .start = IRQ_CF0, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device cf_ide_device = { + .name = "pata_platform", + .id = -1, + .num_resources = ARRAY_SIZE(cf_ide_resources), + .resource = cf_ide_resources, +}; + +static struct platform_device *lboxre2_devices[] __initdata = { + &cf_ide_device, +}; + +static int __init lboxre2_devices_setup(void) +{ + u32 cf0_io_base; /* Boot CF base address */ + pgprot_t prot; + unsigned long paddrbase, psize; + + /* open I/O area window */ + paddrbase = virt_to_phys((void*)PA_AREA5_IO); + psize = PAGE_SIZE; + prot = PAGE_KERNEL_PCC( 1 , _PAGE_PCC_IO16); + cf0_io_base = (u32)p3_ioremap(paddrbase, psize, prot.pgprot); + if (!cf0_io_base) { + printk(KERN_ERR "%s : can't open CF I/O window!\n" , __func__ ); + return -ENOMEM; + } + + cf_ide_resources[0].start += cf0_io_base ; + cf_ide_resources[0].end += cf0_io_base ; + cf_ide_resources[1].start += cf0_io_base ; + cf_ide_resources[1].end += cf0_io_base ; + + return platform_add_devices(lboxre2_devices, + ARRAY_SIZE(lboxre2_devices)); + +} +device_initcall(lboxre2_devices_setup); + +/* + * The Machine Vector + */ +static struct sh_machine_vector mv_lboxre2 __initmv = { + .mv_name = "L-BOX RE2", + .mv_nr_irqs = 72, + .mv_init_irq = init_lboxre2_IRQ, +}; diff --git a/arch/sh/boards/mach-magicpanelr2/Kconfig b/arch/sh/boards/mach-magicpanelr2/Kconfig new file mode 100644 index 00000000000..b0abddc3e84 --- /dev/null +++ b/arch/sh/boards/mach-magicpanelr2/Kconfig @@ -0,0 +1,13 @@ +if SH_MAGIC_PANEL_R2 + +menu "Magic Panel R2 options" + +config SH_MAGIC_PANEL_R2_VERSION + int SH_MAGIC_PANEL_R2_VERSION + default "3" + help + Set the version of the Magic Panel R2 + +endmenu + +endif diff --git a/arch/sh/boards/mach-magicpanelr2/Makefile b/arch/sh/boards/mach-magicpanelr2/Makefile new file mode 100644 index 00000000000..7a6d586b907 --- /dev/null +++ b/arch/sh/boards/mach-magicpanelr2/Makefile @@ -0,0 +1,5 @@ +# +# Makefile for the Magic Panel specific parts +# + +obj-y := setup.o \ No newline at end of file diff --git a/arch/sh/boards/mach-magicpanelr2/setup.c b/arch/sh/boards/mach-magicpanelr2/setup.c new file mode 100644 index 00000000000..f3b8b07ea5d --- /dev/null +++ b/arch/sh/boards/mach-magicpanelr2/setup.c @@ -0,0 +1,394 @@ +/* + * linux/arch/sh/boards/magicpanel/setup.c + * + * Copyright (C) 2007 Markus Brunner, Mark Jonas + * + * Magic Panel Release 2 board setup + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define LAN9115_READY (ctrl_inl(0xA8000084UL) & 0x00000001UL) + +/* Prefer cmdline over RedBoot */ +static const char *probes[] = { "cmdlinepart", "RedBoot", NULL }; + +/* Wait until reset finished. Timeout is 100ms. */ +static int __init ethernet_reset_finished(void) +{ + int i; + + if (LAN9115_READY) + return 1; + + for (i = 0; i < 10; ++i) { + mdelay(10); + if (LAN9115_READY) + return 1; + } + + return 0; +} + +static void __init reset_ethernet(void) +{ + /* PMDR: LAN_RESET=on */ + CLRBITS_OUTB(0x10, PORT_PMDR); + + udelay(200); + + /* PMDR: LAN_RESET=off */ + SETBITS_OUTB(0x10, PORT_PMDR); +} + +static void __init setup_chip_select(void) +{ + /* CS2: LAN (0x08000000 - 0x0bffffff) */ + /* no idle cycles, normal space, 8 bit data bus */ + ctrl_outl(0x36db0400, CS2BCR); + /* (SW:1.5 WR:3 HW:1.5), ext. wait */ + ctrl_outl(0x000003c0, CS2WCR); + + /* CS4: CAN1 (0xb0000000 - 0xb3ffffff) */ + /* no idle cycles, normal space, 8 bit data bus */ + ctrl_outl(0x00000200, CS4BCR); + /* (SW:1.5 WR:3 HW:1.5), ext. wait */ + ctrl_outl(0x00100981, CS4WCR); + + /* CS5a: CAN2 (0xb4000000 - 0xb5ffffff) */ + /* no idle cycles, normal space, 8 bit data bus */ + ctrl_outl(0x00000200, CS5ABCR); + /* (SW:1.5 WR:3 HW:1.5), ext. wait */ + ctrl_outl(0x00100981, CS5AWCR); + + /* CS5b: CAN3 (0xb6000000 - 0xb7ffffff) */ + /* no idle cycles, normal space, 8 bit data bus */ + ctrl_outl(0x00000200, CS5BBCR); + /* (SW:1.5 WR:3 HW:1.5), ext. wait */ + ctrl_outl(0x00100981, CS5BWCR); + + /* CS6a: Rotary (0xb8000000 - 0xb9ffffff) */ + /* no idle cycles, normal space, 8 bit data bus */ + ctrl_outl(0x00000200, CS6ABCR); + /* (SW:1.5 WR:3 HW:1.5), no ext. wait */ + ctrl_outl(0x001009C1, CS6AWCR); +} + +static void __init setup_port_multiplexing(void) +{ + /* A7 GPO(LED8); A6 GPO(LED7); A5 GPO(LED6); A4 GPO(LED5); + * A3 GPO(LED4); A2 GPO(LED3); A1 GPO(LED2); A0 GPO(LED1); + */ + ctrl_outw(0x5555, PORT_PACR); /* 01 01 01 01 01 01 01 01 */ + + /* B7 GPO(RST4); B6 GPO(RST3); B5 GPO(RST2); B4 GPO(RST1); + * B3 GPO(PB3); B2 GPO(PB2); B1 GPO(PB1); B0 GPO(PB0); + */ + ctrl_outw(0x5555, PORT_PBCR); /* 01 01 01 01 01 01 01 01 */ + + /* C7 GPO(PC7); C6 GPO(PC6); C5 GPO(PC5); C4 GPO(PC4); + * C3 LCD_DATA3; C2 LCD_DATA2; C1 LCD_DATA1; C0 LCD_DATA0; + */ + ctrl_outw(0x5500, PORT_PCCR); /* 01 01 01 01 00 00 00 00 */ + + /* D7 GPO(PD7); D6 GPO(PD6); D5 GPO(PD5); D4 GPO(PD4); + * D3 GPO(PD3); D2 GPO(PD2); D1 GPO(PD1); D0 GPO(PD0); + */ + ctrl_outw(0x5555, PORT_PDCR); /* 01 01 01 01 01 01 01 01 */ + + /* E7 (x); E6 GPI(nu); E5 GPI(nu); E4 LCD_M_DISP; + * E3 LCD_CL1; E2 LCD_CL2; E1 LCD_DON; E0 LCD_FLM; + */ + ctrl_outw(0x3C00, PORT_PECR); /* 00 11 11 00 00 00 00 00 */ + + /* F7 (x); F6 DA1(VLCD); F5 DA0(nc); F4 AN3; + * F3 AN2(MID_AD); F2 AN1(EARTH_AD); F1 AN0(TEMP); F0 GPI+(nc); + */ + ctrl_outw(0x0002, PORT_PFCR); /* 00 00 00 00 00 00 00 10 */ + + /* G7 (x); G6 IRQ5(TOUCH_BUSY); G5 IRQ4(TOUCH_IRQ); G4 GPI(KEY2); + * G3 GPI(KEY1); G2 GPO(LED11); G1 GPO(LED10); G0 GPO(LED9); + */ + ctrl_outw(0x03D5, PORT_PGCR); /* 00 00 00 11 11 01 01 01 */ + + /* H7 (x); H6 /RAS(BRAS); H5 /CAS(BCAS); H4 CKE(BCKE); + * H3 GPO(EARTH_OFF); H2 GPO(EARTH_TEST); H1 USB2_PWR; H0 USB1_PWR; + */ + ctrl_outw(0x0050, PORT_PHCR); /* 00 00 00 00 01 01 00 00 */ + + /* J7 (x); J6 AUDCK; J5 ASEBRKAK; J4 AUDATA3; + * J3 AUDATA2; J2 AUDATA1; J1 AUDATA0; J0 AUDSYNC; + */ + ctrl_outw(0x0000, PORT_PJCR); /* 00 00 00 00 00 00 00 00 */ + + /* K7 (x); K6 (x); K5 (x); K4 (x); + * K3 PINT7(/PWR2); K2 PINT6(/PWR1); K1 PINT5(nu); K0 PINT4(FLASH_READY) + */ + ctrl_outw(0x00FF, PORT_PKCR); /* 00 00 00 00 11 11 11 11 */ + + /* L7 TRST; L6 TMS; L5 TDO; L4 TDI; + * L3 TCK; L2 (x); L1 (x); L0 (x); + */ + ctrl_outw(0x0000, PORT_PLCR); /* 00 00 00 00 00 00 00 00 */ + + /* M7 GPO(CURRENT_SINK); M6 GPO(PWR_SWITCH); M5 GPO(LAN_SPEED); + * M4 GPO(LAN_RESET); M3 GPO(BUZZER); M2 GPO(LCD_BL); + * M1 CS5B(CAN3_CS); M0 GPI+(nc); + */ + ctrl_outw(0x5552, PORT_PMCR); /* 01 01 01 01 01 01 00 10 */ + + /* CURRENT_SINK=off, PWR_SWITCH=off, LAN_SPEED=100MBit, + * LAN_RESET=off, BUZZER=off, LCD_BL=off + */ +#if CONFIG_SH_MAGIC_PANEL_R2_VERSION == 2 + ctrl_outb(0x30, PORT_PMDR); +#elif CONFIG_SH_MAGIC_PANEL_R2_VERSION == 3 + ctrl_outb(0xF0, PORT_PMDR); +#else +#error Unknown revision of PLATFORM_MP_R2 +#endif + + /* P7 (x); P6 (x); P5 (x); + * P4 GPO(nu); P3 IRQ3(LAN_IRQ); P2 IRQ2(CAN3_IRQ); + * P1 IRQ1(CAN2_IRQ); P0 IRQ0(CAN1_IRQ) + */ + ctrl_outw(0x0100, PORT_PPCR); /* 00 00 00 01 00 00 00 00 */ + ctrl_outb(0x10, PORT_PPDR); + + /* R7 A25; R6 A24; R5 A23; R4 A22; + * R3 A21; R2 A20; R1 A19; R0 A0; + */ + ctrl_outw(0x0000, PORT_PRCR); /* 00 00 00 00 00 00 00 00 */ + + /* S7 (x); S6 (x); S5 (x); S4 GPO(EEPROM_CS2); + * S3 GPO(EEPROM_CS1); S2 SIOF0_TXD; S1 SIOF0_RXD; S0 SIOF0_SCK; + */ + ctrl_outw(0x0140, PORT_PSCR); /* 00 00 00 01 01 00 00 00 */ + + /* T7 (x); T6 (x); T5 (x); T4 COM1_CTS; + * T3 COM1_RTS; T2 COM1_TXD; T1 COM1_RXD; T0 GPO(WDOG) + */ + ctrl_outw(0x0001, PORT_PTCR); /* 00 00 00 00 00 00 00 01 */ + + /* U7 (x); U6 (x); U5 (x); U4 GPI+(/AC_FAULT); + * U3 GPO(TOUCH_CS); U2 TOUCH_TXD; U1 TOUCH_RXD; U0 TOUCH_SCK; + */ + ctrl_outw(0x0240, PORT_PUCR); /* 00 00 00 10 01 00 00 00 */ + + /* V7 (x); V6 (x); V5 (x); V4 GPO(MID2); + * V3 GPO(MID1); V2 CARD_TxD; V1 CARD_RxD; V0 GPI+(/BAT_FAULT); + */ + ctrl_outw(0x0142, PORT_PVCR); /* 00 00 00 01 01 00 00 10 */ +} + +static void __init mpr2_setup(char **cmdline_p) +{ + __set_io_port_base(0xa0000000); + + /* set Pin Select Register A: + * /PCC_CD1, /PCC_CD2, PCC_BVD1, PCC_BVD2, + * /IOIS16, IRQ4, IRQ5, USB1d_SUSPEND + */ + ctrl_outw(0xAABC, PORT_PSELA); + /* set Pin Select Register B: + * /SCIF0_RTS, /SCIF0_CTS, LCD_VCPWC, + * LCD_VEPWC, IIC_SDA, IIC_SCL, Reserved + */ + ctrl_outw(0x3C00, PORT_PSELB); + /* set Pin Select Register C: + * SIOF1_SCK, SIOF1_RxD, SCIF1_RxD, SCIF1_TxD, Reserved + */ + ctrl_outw(0x0000, PORT_PSELC); + /* set Pin Select Register D: Reserved, SIOF1_TxD, Reserved, SIOF1_MCLK, + * Reserved, SIOF1_SYNC, Reserved, SCIF1_SCK, Reserved + */ + ctrl_outw(0x0000, PORT_PSELD); + /* set USB TxRx Control: Reserved, DRV, Reserved, USB_TRANS, USB_SEL */ + ctrl_outw(0x0101, PORT_UTRCTL); + /* set USB Clock Control: USSCS, USSTB, Reserved (HighByte always A5) */ + ctrl_outw(0xA5C0, PORT_UCLKCR_W); + + setup_chip_select(); + + setup_port_multiplexing(); + + reset_ethernet(); + + printk(KERN_INFO "Magic Panel Release 2 A.%i\n", + CONFIG_SH_MAGIC_PANEL_R2_VERSION); + + if (ethernet_reset_finished() == 0) + printk(KERN_WARNING "Ethernet not ready\n"); +} + +static struct resource smc911x_resources[] = { + [0] = { + .start = 0xa8000000, + .end = 0xabffffff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 35, + .end = 35, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device smc911x_device = { + .name = "smc911x", + .id = -1, + .num_resources = ARRAY_SIZE(smc911x_resources), + .resource = smc911x_resources, +}; + +static struct resource heartbeat_resources[] = { + [0] = { + .start = PA_LED, + .end = PA_LED, + .flags = IORESOURCE_MEM, + }, +}; + +static struct heartbeat_data heartbeat_data = { + .flags = HEARTBEAT_INVERTED, +}; + +static struct platform_device heartbeat_device = { + .name = "heartbeat", + .id = -1, + .dev = { + .platform_data = &heartbeat_data, + }, + .num_resources = ARRAY_SIZE(heartbeat_resources), + .resource = heartbeat_resources, +}; + +static struct mtd_partition *parsed_partitions; + +static struct mtd_partition mpr2_partitions[] = { + /* Reserved for bootloader, read-only */ + { + .name = "Bootloader", + .offset = 0x00000000UL, + .size = MPR2_MTD_BOOTLOADER_SIZE, + .mask_flags = MTD_WRITEABLE, + }, + /* Reserved for kernel image */ + { + .name = "Kernel", + .offset = MTDPART_OFS_NXTBLK, + .size = MPR2_MTD_KERNEL_SIZE, + }, + /* Rest is used for Flash FS */ + { + .name = "Flash_FS", + .offset = MTDPART_OFS_NXTBLK, + .size = MTDPART_SIZ_FULL, + } +}; + +static struct physmap_flash_data flash_data = { + .width = 2, +}; + +static struct resource flash_resource = { + .start = 0x00000000, + .end = 0x2000000UL, + .flags = IORESOURCE_MEM, +}; + +static struct platform_device flash_device = { + .name = "physmap-flash", + .id = -1, + .resource = &flash_resource, + .num_resources = 1, + .dev = { + .platform_data = &flash_data, + }, +}; + +static struct mtd_info *flash_mtd; + +static struct map_info mpr2_flash_map = { + .name = "Magic Panel R2 Flash", + .size = 0x2000000UL, + .bankwidth = 2, +}; + +static void __init set_mtd_partitions(void) +{ + int nr_parts = 0; + + simple_map_init(&mpr2_flash_map); + flash_mtd = do_map_probe("cfi_probe", &mpr2_flash_map); + nr_parts = parse_mtd_partitions(flash_mtd, probes, + &parsed_partitions, 0); + /* If there is no partition table, used the hard coded table */ + if (nr_parts <= 0) { + flash_data.parts = mpr2_partitions; + flash_data.nr_parts = ARRAY_SIZE(mpr2_partitions); + } else { + flash_data.nr_parts = nr_parts; + flash_data.parts = parsed_partitions; + } +} + +/* + * Add all resources to the platform_device + */ + +static struct platform_device *mpr2_devices[] __initdata = { + &heartbeat_device, + &smc911x_device, + &flash_device, +}; + + +static int __init mpr2_devices_setup(void) +{ + set_mtd_partitions(); + return platform_add_devices(mpr2_devices, ARRAY_SIZE(mpr2_devices)); +} +device_initcall(mpr2_devices_setup); + +/* + * Initialize IRQ setting + */ +static void __init init_mpr2_IRQ(void) +{ + plat_irq_setup_pins(IRQ_MODE_IRQ); /* install handlers for IRQ0-5 */ + + set_irq_type(32, IRQ_TYPE_LEVEL_LOW); /* IRQ0 CAN1 */ + set_irq_type(33, IRQ_TYPE_LEVEL_LOW); /* IRQ1 CAN2 */ + set_irq_type(34, IRQ_TYPE_LEVEL_LOW); /* IRQ2 CAN3 */ + set_irq_type(35, IRQ_TYPE_LEVEL_LOW); /* IRQ3 SMSC9115 */ + set_irq_type(36, IRQ_TYPE_EDGE_RISING); /* IRQ4 touchscreen */ + set_irq_type(37, IRQ_TYPE_EDGE_FALLING); /* IRQ5 touchscreen */ + + intc_set_priority(32, 13); /* IRQ0 CAN1 */ + intc_set_priority(33, 13); /* IRQ0 CAN2 */ + intc_set_priority(34, 13); /* IRQ0 CAN3 */ + intc_set_priority(35, 6); /* IRQ3 SMSC9115 */ +} + +/* + * The Machine Vector + */ + +static struct sh_machine_vector mv_mpr2 __initmv = { + .mv_name = "mpr2", + .mv_setup = mpr2_setup, + .mv_init_irq = init_mpr2_IRQ, +}; diff --git a/arch/sh/boards/mach-microdev/Makefile b/arch/sh/boards/mach-microdev/Makefile new file mode 100644 index 00000000000..1387dd6c85e --- /dev/null +++ b/arch/sh/boards/mach-microdev/Makefile @@ -0,0 +1,8 @@ +# +# Makefile for the SuperH MicroDev specific parts of the kernel +# + +obj-y := setup.o irq.o io.o + +obj-$(CONFIG_HEARTBEAT) += led.o + diff --git a/arch/sh/boards/mach-microdev/io.c b/arch/sh/boards/mach-microdev/io.c new file mode 100644 index 00000000000..9f8a540f7e1 --- /dev/null +++ b/arch/sh/boards/mach-microdev/io.c @@ -0,0 +1,367 @@ +/* + * linux/arch/sh/boards/superh/microdev/io.c + * + * Copyright (C) 2003 Sean McGoogan (Sean.McGoogan@superh.com) + * Copyright (C) 2003, 2004 SuperH, Inc. + * Copyright (C) 2004 Paul Mundt + * + * SuperH SH4-202 MicroDev board support. + * + * May be copied or modified under the terms of the GNU General Public + * License. See linux/COPYING for more information. + */ + +#include +#include +#include +#include +#include + + /* + * we need to have a 'safe' address to re-direct all I/O requests + * that we do not explicitly wish to handle. This safe address + * must have the following properies: + * + * * writes are ignored (no exception) + * * reads are benign (no side-effects) + * * accesses of width 1, 2 and 4-bytes are all valid. + * + * The Processor Version Register (PVR) has these properties. + */ +#define PVR 0xff000030 /* Processor Version Register */ + + +#define IO_IDE2_BASE 0x170ul /* I/O base for SMSC FDC37C93xAPM IDE #2 */ +#define IO_IDE1_BASE 0x1f0ul /* I/O base for SMSC FDC37C93xAPM IDE #1 */ +#define IO_ISP1161_BASE 0x290ul /* I/O port for Philips ISP1161x USB chip */ +#define IO_SERIAL2_BASE 0x2f8ul /* I/O base for SMSC FDC37C93xAPM Serial #2 */ +#define IO_LAN91C111_BASE 0x300ul /* I/O base for SMSC LAN91C111 Ethernet chip */ +#define IO_IDE2_MISC 0x376ul /* I/O misc for SMSC FDC37C93xAPM IDE #2 */ +#define IO_SUPERIO_BASE 0x3f0ul /* I/O base for SMSC FDC37C93xAPM SuperIO chip */ +#define IO_IDE1_MISC 0x3f6ul /* I/O misc for SMSC FDC37C93xAPM IDE #1 */ +#define IO_SERIAL1_BASE 0x3f8ul /* I/O base for SMSC FDC37C93xAPM Serial #1 */ + +#define IO_ISP1161_EXTENT 0x04ul /* I/O extent for Philips ISP1161x USB chip */ +#define IO_LAN91C111_EXTENT 0x10ul /* I/O extent for SMSC LAN91C111 Ethernet chip */ +#define IO_SUPERIO_EXTENT 0x02ul /* I/O extent for SMSC FDC37C93xAPM SuperIO chip */ +#define IO_IDE_EXTENT 0x08ul /* I/O extent for IDE Task Register set */ +#define IO_SERIAL_EXTENT 0x10ul + +#define IO_LAN91C111_PHYS 0xa7500000ul /* Physical address of SMSC LAN91C111 Ethernet chip */ +#define IO_ISP1161_PHYS 0xa7700000ul /* Physical address of Philips ISP1161x USB chip */ +#define IO_SUPERIO_PHYS 0xa7800000ul /* Physical address of SMSC FDC37C93xAPM SuperIO chip */ + +/* + * map I/O ports to memory-mapped addresses + */ +static unsigned long microdev_isa_port2addr(unsigned long offset) +{ + unsigned long result; + + if ((offset >= IO_LAN91C111_BASE) && + (offset < IO_LAN91C111_BASE + IO_LAN91C111_EXTENT)) { + /* + * SMSC LAN91C111 Ethernet chip + */ + result = IO_LAN91C111_PHYS + offset - IO_LAN91C111_BASE; + } else if ((offset >= IO_SUPERIO_BASE) && + (offset < IO_SUPERIO_BASE + IO_SUPERIO_EXTENT)) { + /* + * SMSC FDC37C93xAPM SuperIO chip + * + * Configuration Registers + */ + result = IO_SUPERIO_PHYS + (offset << 1); +#if 0 + } else if (offset == KBD_DATA_REG || offset == KBD_CNTL_REG || + offset == KBD_STATUS_REG) { + /* + * SMSC FDC37C93xAPM SuperIO chip + * + * PS/2 Keyboard + Mouse (ports 0x60 and 0x64). + */ + result = IO_SUPERIO_PHYS + (offset << 1); +#endif + } else if (((offset >= IO_IDE1_BASE) && + (offset < IO_IDE1_BASE + IO_IDE_EXTENT)) || + (offset == IO_IDE1_MISC)) { + /* + * SMSC FDC37C93xAPM SuperIO chip + * + * IDE #1 + */ + result = IO_SUPERIO_PHYS + (offset << 1); + } else if (((offset >= IO_IDE2_BASE) && + (offset < IO_IDE2_BASE + IO_IDE_EXTENT)) || + (offset == IO_IDE2_MISC)) { + /* + * SMSC FDC37C93xAPM SuperIO chip + * + * IDE #2 + */ + result = IO_SUPERIO_PHYS + (offset << 1); + } else if ((offset >= IO_SERIAL1_BASE) && + (offset < IO_SERIAL1_BASE + IO_SERIAL_EXTENT)) { + /* + * SMSC FDC37C93xAPM SuperIO chip + * + * Serial #1 + */ + result = IO_SUPERIO_PHYS + (offset << 1); + } else if ((offset >= IO_SERIAL2_BASE) && + (offset < IO_SERIAL2_BASE + IO_SERIAL_EXTENT)) { + /* + * SMSC FDC37C93xAPM SuperIO chip + * + * Serial #2 + */ + result = IO_SUPERIO_PHYS + (offset << 1); + } else if ((offset >= IO_ISP1161_BASE) && + (offset < IO_ISP1161_BASE + IO_ISP1161_EXTENT)) { + /* + * Philips USB ISP1161x chip + */ + result = IO_ISP1161_PHYS + offset - IO_ISP1161_BASE; + } else { + /* + * safe default. + */ + printk("Warning: unexpected port in %s( offset = 0x%lx )\n", + __func__, offset); + result = PVR; + } + + return result; +} + +#define PORT2ADDR(x) (microdev_isa_port2addr(x)) + +static inline void delay(void) +{ +#if defined(CONFIG_PCI) + /* System board present, just make a dummy SRAM access. (CS0 will be + mapped to PCI memory, probably good to avoid it.) */ + ctrl_inw(0xa6800000); +#else + /* CS0 will be mapped to flash, ROM etc so safe to access it. */ + ctrl_inw(0xa0000000); +#endif +} + +unsigned char microdev_inb(unsigned long port) +{ +#ifdef CONFIG_PCI + if (port >= PCIBIOS_MIN_IO) + return microdev_pci_inb(port); +#endif + return *(volatile unsigned char*)PORT2ADDR(port); +} + +unsigned short microdev_inw(unsigned long port) +{ +#ifdef CONFIG_PCI + if (port >= PCIBIOS_MIN_IO) + return microdev_pci_inw(port); +#endif + return *(volatile unsigned short*)PORT2ADDR(port); +} + +unsigned int microdev_inl(unsigned long port) +{ +#ifdef CONFIG_PCI + if (port >= PCIBIOS_MIN_IO) + return microdev_pci_inl(port); +#endif + return *(volatile unsigned int*)PORT2ADDR(port); +} + +void microdev_outw(unsigned short b, unsigned long port) +{ +#ifdef CONFIG_PCI + if (port >= PCIBIOS_MIN_IO) { + microdev_pci_outw(b, port); + return; + } +#endif + *(volatile unsigned short*)PORT2ADDR(port) = b; +} + +void microdev_outb(unsigned char b, unsigned long port) +{ +#ifdef CONFIG_PCI + if (port >= PCIBIOS_MIN_IO) { + microdev_pci_outb(b, port); + return; + } +#endif + + /* + * There is a board feature with the current SH4-202 MicroDev in + * that the 2 byte enables (nBE0 and nBE1) are tied together (and + * to the Chip Select Line (Ethernet_CS)). Due to this connectivity, + * it is not possible to safely perform 8-bit writes to the + * Ethernet registers, as 16-bits will be consumed from the Data + * lines (corrupting the other byte). Hence, this function is + * written to implement 16-bit read/modify/write for all byte-wide + * accesses. + * + * Note: there is no problem with byte READS (even or odd). + * + * Sean McGoogan - 16th June 2003. + */ + if ((port >= IO_LAN91C111_BASE) && + (port < IO_LAN91C111_BASE + IO_LAN91C111_EXTENT)) { + /* + * Then are trying to perform a byte-write to the + * LAN91C111. This needs special care. + */ + if (port % 2 == 1) { /* is the port odd ? */ + /* unset bit-0, i.e. make even */ + const unsigned long evenPort = port-1; + unsigned short word; + + /* + * do a 16-bit read/write to write to 'port', + * preserving even byte. + * + * Even addresses are bits 0-7 + * Odd addresses are bits 8-15 + */ + word = microdev_inw(evenPort); + word = (word & 0xffu) | (b << 8); + microdev_outw(word, evenPort); + } else { + /* else, we are trying to do an even byte write */ + unsigned short word; + + /* + * do a 16-bit read/write to write to 'port', + * preserving odd byte. + * + * Even addresses are bits 0-7 + * Odd addresses are bits 8-15 + */ + word = microdev_inw(port); + word = (word & 0xff00u) | (b); + microdev_outw(word, port); + } + } else { + *(volatile unsigned char*)PORT2ADDR(port) = b; + } +} + +void microdev_outl(unsigned int b, unsigned long port) +{ +#ifdef CONFIG_PCI + if (port >= PCIBIOS_MIN_IO) { + microdev_pci_outl(b, port); + return; + } +#endif + *(volatile unsigned int*)PORT2ADDR(port) = b; +} + +unsigned char microdev_inb_p(unsigned long port) +{ + unsigned char v = microdev_inb(port); + delay(); + return v; +} + +unsigned short microdev_inw_p(unsigned long port) +{ + unsigned short v = microdev_inw(port); + delay(); + return v; +} + +unsigned int microdev_inl_p(unsigned long port) +{ + unsigned int v = microdev_inl(port); + delay(); + return v; +} + +void microdev_outb_p(unsigned char b, unsigned long port) +{ + microdev_outb(b, port); + delay(); +} + +void microdev_outw_p(unsigned short b, unsigned long port) +{ + microdev_outw(b, port); + delay(); +} + +void microdev_outl_p(unsigned int b, unsigned long port) +{ + microdev_outl(b, port); + delay(); +} + +void microdev_insb(unsigned long port, void *buffer, unsigned long count) +{ + volatile unsigned char *port_addr; + unsigned char *buf = buffer; + + port_addr = (volatile unsigned char *)PORT2ADDR(port); + + while (count--) + *buf++ = *port_addr; +} + +void microdev_insw(unsigned long port, void *buffer, unsigned long count) +{ + volatile unsigned short *port_addr; + unsigned short *buf = buffer; + + port_addr = (volatile unsigned short *)PORT2ADDR(port); + + while (count--) + *buf++ = *port_addr; +} + +void microdev_insl(unsigned long port, void *buffer, unsigned long count) +{ + volatile unsigned long *port_addr; + unsigned int *buf = buffer; + + port_addr = (volatile unsigned long *)PORT2ADDR(port); + + while (count--) + *buf++ = *port_addr; +} + +void microdev_outsb(unsigned long port, const void *buffer, unsigned long count) +{ + volatile unsigned char *port_addr; + const unsigned char *buf = buffer; + + port_addr = (volatile unsigned char *)PORT2ADDR(port); + + while (count--) + *port_addr = *buf++; +} + +void microdev_outsw(unsigned long port, const void *buffer, unsigned long count) +{ + volatile unsigned short *port_addr; + const unsigned short *buf = buffer; + + port_addr = (volatile unsigned short *)PORT2ADDR(port); + + while (count--) + *port_addr = *buf++; +} + +void microdev_outsl(unsigned long port, const void *buffer, unsigned long count) +{ + volatile unsigned long *port_addr; + const unsigned int *buf = buffer; + + port_addr = (volatile unsigned long *)PORT2ADDR(port); + + while (count--) + *port_addr = *buf++; +} diff --git a/arch/sh/boards/mach-microdev/irq.c b/arch/sh/boards/mach-microdev/irq.c new file mode 100644 index 00000000000..4d335077a3f --- /dev/null +++ b/arch/sh/boards/mach-microdev/irq.c @@ -0,0 +1,183 @@ +/* + * arch/sh/boards/superh/microdev/irq.c + * + * Copyright (C) 2003 Sean McGoogan (Sean.McGoogan@superh.com) + * + * SuperH SH4-202 MicroDev board support. + * + * May be copied or modified under the terms of the GNU General Public + * License. See linux/COPYING for more information. + */ + +#include +#include +#include +#include +#include +#include + +#define NUM_EXTERNAL_IRQS 16 /* IRL0 .. IRL15 */ + +static const struct { + unsigned char fpgaIrq; + unsigned char mapped; + const char *name; +} fpgaIrqTable[NUM_EXTERNAL_IRQS] = { + { 0, 0, "unused" }, /* IRQ #0 IRL=15 0x200 */ + { MICRODEV_FPGA_IRQ_KEYBOARD, 1, "keyboard" }, /* IRQ #1 IRL=14 0x220 */ + { MICRODEV_FPGA_IRQ_SERIAL1, 1, "Serial #1"}, /* IRQ #2 IRL=13 0x240 */ + { MICRODEV_FPGA_IRQ_ETHERNET, 1, "Ethernet" }, /* IRQ #3 IRL=12 0x260 */ + { MICRODEV_FPGA_IRQ_SERIAL2, 0, "Serial #2"}, /* IRQ #4 IRL=11 0x280 */ + { 0, 0, "unused" }, /* IRQ #5 IRL=10 0x2a0 */ + { 0, 0, "unused" }, /* IRQ #6 IRL=9 0x2c0 */ + { MICRODEV_FPGA_IRQ_USB_HC, 1, "USB" }, /* IRQ #7 IRL=8 0x2e0 */ + { MICRODEV_IRQ_PCI_INTA, 1, "PCI INTA" }, /* IRQ #8 IRL=7 0x300 */ + { MICRODEV_IRQ_PCI_INTB, 1, "PCI INTB" }, /* IRQ #9 IRL=6 0x320 */ + { MICRODEV_IRQ_PCI_INTC, 1, "PCI INTC" }, /* IRQ #10 IRL=5 0x340 */ + { MICRODEV_IRQ_PCI_INTD, 1, "PCI INTD" }, /* IRQ #11 IRL=4 0x360 */ + { MICRODEV_FPGA_IRQ_MOUSE, 1, "mouse" }, /* IRQ #12 IRL=3 0x380 */ + { MICRODEV_FPGA_IRQ_IDE2, 1, "IDE #2" }, /* IRQ #13 IRL=2 0x3a0 */ + { MICRODEV_FPGA_IRQ_IDE1, 1, "IDE #1" }, /* IRQ #14 IRL=1 0x3c0 */ + { 0, 0, "unused" }, /* IRQ #15 IRL=0 0x3e0 */ +}; + +#if (MICRODEV_LINUX_IRQ_KEYBOARD != 1) +# error Inconsistancy in defining the IRQ# for Keyboard! +#endif + +#if (MICRODEV_LINUX_IRQ_ETHERNET != 3) +# error Inconsistancy in defining the IRQ# for Ethernet! +#endif + +#if (MICRODEV_LINUX_IRQ_USB_HC != 7) +# error Inconsistancy in defining the IRQ# for USB! +#endif + +#if (MICRODEV_LINUX_IRQ_MOUSE != 12) +# error Inconsistancy in defining the IRQ# for PS/2 Mouse! +#endif + +#if (MICRODEV_LINUX_IRQ_IDE2 != 13) +# error Inconsistancy in defining the IRQ# for secondary IDE! +#endif + +#if (MICRODEV_LINUX_IRQ_IDE1 != 14) +# error Inconsistancy in defining the IRQ# for primary IDE! +#endif + +static void enable_microdev_irq(unsigned int irq); +static void disable_microdev_irq(unsigned int irq); + + /* shutdown is same as "disable" */ +#define shutdown_microdev_irq disable_microdev_irq + +static void mask_and_ack_microdev(unsigned int); +static void end_microdev_irq(unsigned int irq); + +static unsigned int startup_microdev_irq(unsigned int irq) +{ + enable_microdev_irq(irq); + return 0; /* never anything pending */ +} + +static struct hw_interrupt_type microdev_irq_type = { + .typename = "MicroDev-IRQ", + .startup = startup_microdev_irq, + .shutdown = shutdown_microdev_irq, + .enable = enable_microdev_irq, + .disable = disable_microdev_irq, + .ack = mask_and_ack_microdev, + .end = end_microdev_irq +}; + +static void disable_microdev_irq(unsigned int irq) +{ + unsigned int fpgaIrq; + + if (irq >= NUM_EXTERNAL_IRQS) + return; + if (!fpgaIrqTable[irq].mapped) + return; + + fpgaIrq = fpgaIrqTable[irq].fpgaIrq; + + /* disable interrupts on the FPGA INTC register */ + ctrl_outl(MICRODEV_FPGA_INTC_MASK(fpgaIrq), MICRODEV_FPGA_INTDSB_REG); +} + +static void enable_microdev_irq(unsigned int irq) +{ + unsigned long priorityReg, priorities, pri; + unsigned int fpgaIrq; + + if (unlikely(irq >= NUM_EXTERNAL_IRQS)) + return; + if (unlikely(!fpgaIrqTable[irq].mapped)) + return; + + pri = 15 - irq; + + fpgaIrq = fpgaIrqTable[irq].fpgaIrq; + priorityReg = MICRODEV_FPGA_INTPRI_REG(fpgaIrq); + + /* set priority for the interrupt */ + priorities = ctrl_inl(priorityReg); + priorities &= ~MICRODEV_FPGA_INTPRI_MASK(fpgaIrq); + priorities |= MICRODEV_FPGA_INTPRI_LEVEL(fpgaIrq, pri); + ctrl_outl(priorities, priorityReg); + + /* enable interrupts on the FPGA INTC register */ + ctrl_outl(MICRODEV_FPGA_INTC_MASK(fpgaIrq), MICRODEV_FPGA_INTENB_REG); +} + + /* This functions sets the desired irq handler to be a MicroDev type */ +static void __init make_microdev_irq(unsigned int irq) +{ + disable_irq_nosync(irq); + irq_desc[irq].chip = µdev_irq_type; + disable_microdev_irq(irq); +} + +static void mask_and_ack_microdev(unsigned int irq) +{ + disable_microdev_irq(irq); +} + +static void end_microdev_irq(unsigned int irq) +{ + if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS))) + enable_microdev_irq(irq); +} + +extern void __init init_microdev_irq(void) +{ + int i; + + /* disable interrupts on the FPGA INTC register */ + ctrl_outl(~0ul, MICRODEV_FPGA_INTDSB_REG); + + for (i = 0; i < NUM_EXTERNAL_IRQS; i++) + make_microdev_irq(i); +} + +extern void microdev_print_fpga_intc_status(void) +{ + volatile unsigned int * const intenb = (unsigned int*)MICRODEV_FPGA_INTENB_REG; + volatile unsigned int * const intdsb = (unsigned int*)MICRODEV_FPGA_INTDSB_REG; + volatile unsigned int * const intpria = (unsigned int*)MICRODEV_FPGA_INTPRI_REG(0); + volatile unsigned int * const intprib = (unsigned int*)MICRODEV_FPGA_INTPRI_REG(8); + volatile unsigned int * const intpric = (unsigned int*)MICRODEV_FPGA_INTPRI_REG(16); + volatile unsigned int * const intprid = (unsigned int*)MICRODEV_FPGA_INTPRI_REG(24); + volatile unsigned int * const intsrc = (unsigned int*)MICRODEV_FPGA_INTSRC_REG; + volatile unsigned int * const intreq = (unsigned int*)MICRODEV_FPGA_INTREQ_REG; + + printk("-------------------------- microdev_print_fpga_intc_status() ------------------\n"); + printk("FPGA_INTENB = 0x%08x\n", *intenb); + printk("FPGA_INTDSB = 0x%08x\n", *intdsb); + printk("FPGA_INTSRC = 0x%08x\n", *intsrc); + printk("FPGA_INTREQ = 0x%08x\n", *intreq); + printk("FPGA_INTPRI[3..0] = %08x:%08x:%08x:%08x\n", *intprid, *intpric, *intprib, *intpria); + printk("-------------------------------------------------------------------------------\n"); +} + + diff --git a/arch/sh/boards/mach-microdev/led.c b/arch/sh/boards/mach-microdev/led.c new file mode 100644 index 00000000000..36e54b47a75 --- /dev/null +++ b/arch/sh/boards/mach-microdev/led.c @@ -0,0 +1,101 @@ +/* + * linux/arch/sh/boards/superh/microdev/led.c + * + * Copyright (C) 2002 Stuart Menefy + * Copyright (C) 2003 Richard Curnow (Richard.Curnow@superh.com) + * + * May be copied or modified under the terms of the GNU General Public + * License. See linux/COPYING for more information. + * + */ + +#include + +#define LED_REGISTER 0xa6104d20 + +static void mach_led_d9(int value) +{ + unsigned long reg; + reg = ctrl_inl(LED_REGISTER); + reg &= ~1; + reg |= (value & 1); + ctrl_outl(reg, LED_REGISTER); + return; +} + +static void mach_led_d10(int value) +{ + unsigned long reg; + reg = ctrl_inl(LED_REGISTER); + reg &= ~2; + reg |= ((value & 1) << 1); + ctrl_outl(reg, LED_REGISTER); + return; +} + + +#ifdef CONFIG_HEARTBEAT +#include + +static unsigned char banner_table[] = { + 0x11, 0x01, 0x11, 0x01, 0x11, 0x03, + 0x11, 0x01, 0x11, 0x01, 0x13, 0x03, + 0x11, 0x01, 0x13, 0x01, 0x13, 0x01, 0x11, 0x03, + 0x11, 0x03, + 0x11, 0x01, 0x13, 0x01, 0x11, 0x03, + 0x11, 0x01, 0x11, 0x01, 0x11, 0x01, 0x11, 0x07, + 0x13, 0x01, 0x13, 0x03, + 0x11, 0x01, 0x11, 0x03, + 0x13, 0x01, 0x11, 0x01, 0x13, 0x01, 0x11, 0x03, + 0x11, 0x01, 0x13, 0x01, 0x11, 0x03, + 0x13, 0x01, 0x13, 0x01, 0x13, 0x03, + 0x13, 0x01, 0x11, 0x01, 0x11, 0x03, + 0x11, 0x03, + 0x11, 0x01, 0x11, 0x01, 0x11, 0x01, 0x13, 0x07, + 0xff +}; + +static void banner(void) +{ + static int pos = 0; + static int count = 0; + + if (count) { + count--; + } else { + int val = banner_table[pos]; + if (val == 0xff) { + pos = 0; + val = banner_table[pos]; + } + pos++; + mach_led_d10((val >> 4) & 1); + count = 10 * (val & 0xf); + } +} + +/* From heartbeat_harp in the stboards directory */ +/* acts like an actual heart beat -- ie thump-thump-pause... */ +void microdev_heartbeat(void) +{ + static unsigned cnt = 0, period = 0, dist = 0; + + if (cnt == 0 || cnt == dist) + mach_led_d9(1); + else if (cnt == 7 || cnt == dist+7) + mach_led_d9(0); + + if (++cnt > period) { + cnt = 0; + /* The hyperbolic function below modifies the heartbeat period + * length in dependency of the current (5min) load. It goes + * through the points f(0)=126, f(1)=86, f(5)=51, + * f(inf)->30. */ + period = ((672< +#include +#include +#include