From 8bd8deead7f00006781c366887da8cf6a02c69ce Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Sat, 13 Sep 2008 22:47:43 -0700 Subject: sparc32: Use PROM device probing for sun4c timers. Signed-off-by: David S. Miller --- arch/sparc/include/asm/timer_32.h | 24 ---------------- arch/sparc/kernel/sun4c_irq.c | 59 ++++++++++++++++++++++++++------------- 2 files changed, 39 insertions(+), 44 deletions(-) (limited to 'arch/sparc') diff --git a/arch/sparc/include/asm/timer_32.h b/arch/sparc/include/asm/timer_32.h index 860a05ef456..351f257eec0 100644 --- a/arch/sparc/include/asm/timer_32.h +++ b/arch/sparc/include/asm/timer_32.h @@ -11,30 +11,6 @@ #include /* For SUN4M_NCPUS */ #include -/* Timer structures. The interrupt timer has two properties which - * are the counter (which is handled in do_timer in sched.c) and the limit. - * This limit is where the timer's counter 'wraps' around. Oddly enough, - * the sun4c timer when it hits the limit wraps back to 1 and not zero - * thus when calculating the value at which it will fire a microsecond you - * must adjust by one. Thanks SUN for designing such great hardware ;( - */ - -/* Note that I am only going to use the timer that interrupts at - * Sparc IRQ 10. There is another one available that can fire at - * IRQ 14. Currently it is left untouched, we keep the PROM's limit - * register value and let the prom take these interrupts. This allows - * L1-A to work. - */ - -struct sun4c_timer_info { - __volatile__ unsigned int cur_count10; - __volatile__ unsigned int timer_limit10; - __volatile__ unsigned int cur_count14; - __volatile__ unsigned int timer_limit14; -}; - -#define SUN_TIMER_PHYSADDR 0xf3000000 - extern __volatile__ unsigned int *master_l10_counter; extern __volatile__ unsigned int *master_l10_limit; diff --git a/arch/sparc/kernel/sun4c_irq.c b/arch/sparc/kernel/sun4c_irq.c index 8033132eda8..92096ba31d5 100644 --- a/arch/sparc/kernel/sun4c_irq.c +++ b/arch/sparc/kernel/sun4c_irq.c @@ -119,16 +119,18 @@ static void sun4c_enable_irq(unsigned int irq_nr) local_irq_restore(flags); } -#define TIMER_IRQ 10 /* Also at level 14, but we ignore that one. */ -#define PROFILE_IRQ 14 /* Level14 ticker.. used by OBP for polling */ +struct sun4c_timer_info { + u32 l10_count; + u32 l10_limit; + u32 l14_count; + u32 l14_limit; +}; -volatile struct sun4c_timer_info *sun4c_timers; +static struct sun4c_timer_info __iomem *sun4c_timers; static void sun4c_clear_clock_irq(void) { - volatile unsigned int clear_intr; - - clear_intr = sun4c_timers->timer_limit10; + sbus_readl(&sun4c_timers->l10_limit); } static void sun4c_load_profile_irq(int cpu, unsigned int limit) @@ -138,32 +140,49 @@ static void sun4c_load_profile_irq(int cpu, unsigned int limit) static void __init sun4c_init_timers(irq_handler_t counter_fn) { - int irq; + const struct linux_prom_irqs *irq; + struct device_node *dp; + const u32 *addr; + int err; - /* Map the Timer chip, this is implemented in hardware inside - * the cache chip on the sun4c. - */ - sun4c_timers = ioremap(SUN_TIMER_PHYSADDR, - sizeof(struct sun4c_timer_info)); + dp = of_find_node_by_name(NULL, "counter-timer"); + if (!dp) { + prom_printf("sun4c_init_timers: Unable to find counter-timer\n"); + prom_halt(); + } + + addr = of_get_property(dp, "address", NULL); + if (!addr) { + prom_printf("sun4c_init_timers: No address property\n"); + prom_halt(); + } + + sun4c_timers = (void __iomem *) (unsigned long) addr[0]; + + irq = of_get_property(dp, "intr", NULL); + if (!irq) { + prom_printf("sun4c_init_timers: No intr property\n"); + prom_halt(); + } /* Have the level 10 timer tick at 100HZ. We don't touch the * level 14 timer limit since we are letting the prom handle * them until we have a real console driver so L1-A works. */ - sun4c_timers->timer_limit10 = (((1000000/HZ) + 1) << 10); - master_l10_counter = &sun4c_timers->cur_count10; - master_l10_limit = &sun4c_timers->timer_limit10; + sbus_writel((((1000000/HZ) + 1) << 10), &sun4c_timers->l10_limit); + + master_l10_counter = &sun4c_timers->l10_count; + master_l10_limit = &sun4c_timers->l10_limit; - irq = request_irq(TIMER_IRQ, - counter_fn, + err = request_irq(irq[0].pri, counter_fn, (IRQF_DISABLED | SA_STATIC_ALLOC), "timer", NULL); - if (irq) { - prom_printf("time_init: unable to attach IRQ%d\n",TIMER_IRQ); + if (err) { + prom_printf("sun4c_init_timers: request_irq() fails with %d\n", err); prom_halt(); } - sun4c_disable_irq(PROFILE_IRQ); + sun4c_disable_irq(irq[1].pri); } #ifdef CONFIG_SMP -- cgit v1.2.3-70-g09d2