From 5a0e3ad6af8660be21ca98a971cd00f331318c05 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 24 Mar 2010 17:04:11 +0900 Subject: include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo Guess-its-ok-by: Christoph Lameter Cc: Ingo Molnar Cc: Lee Schermerhorn --- arch/x86/kernel/setup.c | 1 - 1 file changed, 1 deletion(-) (limited to 'arch/x86/kernel/setup.c') diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c index 5d7ba1a449b..c08d1e3261a 100644 --- a/arch/x86/kernel/setup.c +++ b/arch/x86/kernel/setup.c @@ -55,7 +55,6 @@ #include #include #include -#include #include #include -- cgit v1.2.3-70-g09d2 From 042be38e6106ed70b42d096ab4a1ed4187e510e6 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Thu, 1 Apr 2010 14:32:43 -0700 Subject: ibft, x86: Change reserve_ibft_region() to find_ibft_region() This allows arch code could decide the way to reserve the ibft. And we should reserve ibft as early as possible, instead of BOOTMEM stage, in case the table is in RAM range and is not reserved by BIOS (this will often be the case.) Move to just after find_smp_config(). Also when CONFIG_NO_BOOTMEM=y, We will not have reserve_bootmem() anymore. -v2: fix typo about ibft pointed by Konrad Rzeszutek Wilk Signed-off-by: Yinghai Lu LKML-Reference: <4BB510FB.80601@kernel.org> Cc: Pekka Enberg Cc: Peter Jones Cc: Konrad Rzeszutek Wilk CC: Jan Beulich Signed-off-by: H. Peter Anvin --- arch/x86/kernel/setup.c | 14 ++++++++++++-- drivers/firmware/iscsi_ibft_find.c | 11 ++++++++--- include/linux/iscsi_ibft.h | 8 ++++++-- 3 files changed, 26 insertions(+), 7 deletions(-) (limited to 'arch/x86/kernel/setup.c') diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c index d76e18570c6..580e6b3dbdb 100644 --- a/arch/x86/kernel/setup.c +++ b/arch/x86/kernel/setup.c @@ -608,6 +608,16 @@ static int __init setup_elfcorehdr(char *arg) early_param("elfcorehdr", setup_elfcorehdr); #endif +static __init void reserve_ibft_region(void) +{ + unsigned long addr, size = 0; + + addr = find_ibft_region(&size); + + if (size) + reserve_early_overlap_ok(addr, addr + size, "ibft"); +} + #ifdef CONFIG_X86_RESERVE_LOW_64K static int __init dmi_low_memory_corruption(const struct dmi_system_id *d) { @@ -910,6 +920,8 @@ void __init setup_arch(char **cmdline_p) */ find_smp_config(); + reserve_ibft_region(); + reserve_trampoline_memory(); #ifdef CONFIG_ACPI_SLEEP @@ -977,8 +989,6 @@ void __init setup_arch(char **cmdline_p) dma32_reserve_bootmem(); - reserve_ibft_region(); - #ifdef CONFIG_KVM_CLOCK kvmclock_init(); #endif diff --git a/drivers/firmware/iscsi_ibft_find.c b/drivers/firmware/iscsi_ibft_find.c index dfb15c06c88..8f5d9e25882 100644 --- a/drivers/firmware/iscsi_ibft_find.c +++ b/drivers/firmware/iscsi_ibft_find.c @@ -52,7 +52,7 @@ EXPORT_SYMBOL_GPL(ibft_addr); * Routine used to find the iSCSI Boot Format Table. The logical * kernel address is set in the ibft_addr global variable. */ -void __init reserve_ibft_region(void) +unsigned long __init find_ibft_region(unsigned long *sizep) { unsigned long pos; unsigned int len = 0; @@ -78,6 +78,11 @@ void __init reserve_ibft_region(void) } } } - if (ibft_addr) - reserve_bootmem(pos, PAGE_ALIGN(len), BOOTMEM_DEFAULT); + if (ibft_addr) { + *sizep = PAGE_ALIGN(len); + return pos; + } + + *sizep = 0; + return 0; } diff --git a/include/linux/iscsi_ibft.h b/include/linux/iscsi_ibft.h index 6092487e295..d2e4042f8f5 100644 --- a/include/linux/iscsi_ibft.h +++ b/include/linux/iscsi_ibft.h @@ -42,9 +42,13 @@ extern struct ibft_table_header *ibft_addr; * mapped address is set in the ibft_addr variable. */ #ifdef CONFIG_ISCSI_IBFT_FIND -extern void __init reserve_ibft_region(void); +unsigned long find_ibft_region(unsigned long *sizep); #else -static inline void reserve_ibft_region(void) { } +static inline unsigned long find_ibft_region(unsigned long *sizep) +{ + *sizep = 0; + return 0; +} #endif #endif /* ISCSI_IBFT_H */ -- cgit v1.2.3-70-g09d2