From df39a2e48f99e2d706e8fa4dc99fd148eb59449d Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Mon, 4 Jan 2010 16:17:21 +0000 Subject: x86: mce.h: Fix warning in header checks Someone isn't reading their build output: Move the definition out of the exported header. Signed-off-by: Alan Cox Cc: linux-kernel@vger.kernelorg Signed-off-by: Ingo Molnar --- arch/x86/include/asm/mce.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'arch/x86') diff --git a/arch/x86/include/asm/mce.h b/arch/x86/include/asm/mce.h index 858baa061cf..6c3fdd631ed 100644 --- a/arch/x86/include/asm/mce.h +++ b/arch/x86/include/asm/mce.h @@ -108,10 +108,11 @@ struct mce_log { #define K8_MCE_THRESHOLD_BANK_5 (MCE_THRESHOLD_BASE + 5 * 9) #define K8_MCE_THRESHOLD_DRAM_ECC (MCE_THRESHOLD_BANK_4 + 0) -extern struct atomic_notifier_head x86_mce_decoder_chain; #ifdef __KERNEL__ +extern struct atomic_notifier_head x86_mce_decoder_chain; + #include #include #include -- cgit v1.2.3-70-g09d2 From fcfbb2b5facd65efa7284cc315225bfe3d1856c2 Mon Sep 17 00:00:00 2001 From: Mike Travis Date: Fri, 8 Jan 2010 12:13:54 -0800 Subject: x86: SGI UV: Fix mapping of MMIO registers This fixes the problem of the initialization code not correctly mapping the entire MMIO space on a UV system. A side effect is the map_high() interface needed to be changed to accommodate different address and size shifts. Signed-off-by: Mike Travis Reviewed-by: Mike Habeck Cc: Cc: Jack Steiner Cc: Linus Torvalds LKML-Reference: <4B479202.7080705@sgi.com> Signed-off-by: Ingo Molnar --- arch/x86/kernel/apic/x2apic_uv_x.c | 15 ++++++++------- 1 file changed, 8 insertions(+), 7 deletions(-) (limited to 'arch/x86') diff --git a/arch/x86/kernel/apic/x2apic_uv_x.c b/arch/x86/kernel/apic/x2apic_uv_x.c index 5f92494dab6..b8bb869a661 100644 --- a/arch/x86/kernel/apic/x2apic_uv_x.c +++ b/arch/x86/kernel/apic/x2apic_uv_x.c @@ -374,13 +374,13 @@ static __init void get_lowmem_redirect(unsigned long *base, unsigned long *size) enum map_type {map_wb, map_uc}; -static __init void map_high(char *id, unsigned long base, int shift, - int max_pnode, enum map_type map_type) +static __init void map_high(char *id, unsigned long base, int pshift, + int bshift, int max_pnode, enum map_type map_type) { unsigned long bytes, paddr; - paddr = base << shift; - bytes = (1UL << shift) * (max_pnode + 1); + paddr = base << pshift; + bytes = (1UL << bshift) * (max_pnode + 1); printk(KERN_INFO "UV: Map %s_HI 0x%lx - 0x%lx\n", id, paddr, paddr + bytes); if (map_type == map_uc) @@ -396,7 +396,7 @@ static __init void map_gru_high(int max_pnode) gru.v = uv_read_local_mmr(UVH_RH_GAM_GRU_OVERLAY_CONFIG_MMR); if (gru.s.enable) { - map_high("GRU", gru.s.base, shift, max_pnode, map_wb); + map_high("GRU", gru.s.base, shift, shift, max_pnode, map_wb); gru_start_paddr = ((u64)gru.s.base << shift); gru_end_paddr = gru_start_paddr + (1UL << shift) * (max_pnode + 1); @@ -410,7 +410,7 @@ static __init void map_mmr_high(int max_pnode) mmr.v = uv_read_local_mmr(UVH_RH_GAM_MMR_OVERLAY_CONFIG_MMR); if (mmr.s.enable) - map_high("MMR", mmr.s.base, shift, max_pnode, map_uc); + map_high("MMR", mmr.s.base, shift, shift, max_pnode, map_uc); } static __init void map_mmioh_high(int max_pnode) @@ -420,7 +420,8 @@ static __init void map_mmioh_high(int max_pnode) mmioh.v = uv_read_local_mmr(UVH_RH_GAM_MMIOH_OVERLAY_CONFIG_MMR); if (mmioh.s.enable) - map_high("MMIOH", mmioh.s.base, shift, max_pnode, map_uc); + map_high("MMIOH", mmioh.s.base, shift, mmioh.s.m_io, + max_pnode, map_uc); } static __init void map_low_mmrs(void) -- cgit v1.2.3-70-g09d2 From 42590a75019a50012f25a962246498dead428433 Mon Sep 17 00:00:00 2001 From: FUJITA Tomonori Date: Mon, 4 Jan 2010 16:16:23 +0900 Subject: x86/agp: Fix agp_amd64_init and agp_amd64_cleanup This fixes the regression introduced by the commit f405d2c02395a74d3883bd03ded36457aa3697ad. The above commit fixes the following issue: http://marc.info/?l=linux-kernel&m=126192729110083&w=2 However, it doesn't work properly when you remove and insert the agp_amd64 module again. agp_amd64_init() and agp_amd64_cleanup should be called only when gart_iommu is not called earlier (that is, the GART IOMMU is not enabled). We need to use 'gart_iommu_aperture' to see if GART IOMMU is enabled or not. Signed-off-by: FUJITA Tomonori Cc: mitov@issp.bas.bg Cc: davej@redhat.com LKML-Reference: <20100104161603L.fujita.tomonori@lab.ntt.co.jp> Signed-off-by: Ingo Molnar --- arch/x86/kernel/aperture_64.c | 1 + drivers/char/agp/amd64-agp.c | 5 +++-- 2 files changed, 4 insertions(+), 2 deletions(-) (limited to 'arch/x86') diff --git a/arch/x86/kernel/aperture_64.c b/arch/x86/kernel/aperture_64.c index 3704997e8b2..f147a95fd84 100644 --- a/arch/x86/kernel/aperture_64.c +++ b/arch/x86/kernel/aperture_64.c @@ -31,6 +31,7 @@ #include int gart_iommu_aperture; +EXPORT_SYMBOL_GPL(gart_iommu_aperture); int gart_iommu_aperture_disabled __initdata; int gart_iommu_aperture_allowed __initdata; diff --git a/drivers/char/agp/amd64-agp.c b/drivers/char/agp/amd64-agp.c index 5aa7a586a7f..1afb8968a34 100644 --- a/drivers/char/agp/amd64-agp.c +++ b/drivers/char/agp/amd64-agp.c @@ -725,12 +725,11 @@ static struct pci_driver agp_amd64_pci_driver = { int __init agp_amd64_init(void) { int err = 0; - static int done = 0; if (agp_off) return -EINVAL; - if (done++) + if (gart_iommu_aperture) return agp_bridges_found ? 0 : -ENODEV; err = pci_register_driver(&agp_amd64_pci_driver); @@ -771,6 +770,8 @@ int __init agp_amd64_init(void) static void __exit agp_amd64_cleanup(void) { + if (gart_iommu_aperture) + return; if (aperture_resource) release_resource(aperture_resource); pci_unregister_driver(&agp_amd64_pci_driver); -- cgit v1.2.3-70-g09d2 From 864a0922dd128392467611d9857e5138c6a91999 Mon Sep 17 00:00:00 2001 From: Cyrill Gorcunov Date: Wed, 13 Jan 2010 10:16:07 +0000 Subject: x86: kernel_thread() -- initialize SS to a known state Before the kernel_thread was converted into "C" we had pt_regs::ss set to __KERNEL_DS (by SAVE_ALL asm macro). Though I must admit I didn't find any *explicit* load of %ss from this structure the better to be on a safe side and set it to a known value. Signed-off-by: Cyrill Gorcunov Signed-off-by: Ian Campbell Cc: Christian Kujau Cc: Jeremy Fitzhardinge Cc: Brian Gerst LKML-Reference: <1263377768-19600-1-git-send-email-ian.campbell@citrix.com> Signed-off-by: Ingo Molnar --- arch/x86/kernel/process.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch/x86') diff --git a/arch/x86/kernel/process.c b/arch/x86/kernel/process.c index c6ee241c8a9..02c3ee013cc 100644 --- a/arch/x86/kernel/process.c +++ b/arch/x86/kernel/process.c @@ -288,6 +288,8 @@ int kernel_thread(int (*fn)(void *), void *arg, unsigned long flags) regs.es = __USER_DS; regs.fs = __KERNEL_PERCPU; regs.gs = __KERNEL_STACK_CANARY; +#else + regs.ss = __KERNEL_DS; #endif regs.orig_ax = -1; -- cgit v1.2.3-70-g09d2 From e68266b7001a4e29af083716f0c36c0d6dbb1b39 Mon Sep 17 00:00:00 2001 From: Ian Campbell Date: Wed, 13 Jan 2010 10:16:08 +0000 Subject: x86: xen: 64-bit kernel RPL should be 0 Under Xen 64 bit guests actually run their kernel in ring 3, however the hypervisor takes care of squashing descriptor the RPLs transparently (in order to allow them to continue to differentiate between user and kernel space CS using the RPL). Therefore the Xen paravirt backend should use RPL==0 instead of 1 (or 3). Using RPL==1 causes generic arch code to take incorrect code paths because it uses "testl $3, , je foo" type tests for a userspace CS and this considers 1==userspace. This issue was previously masked because get_kernel_rpl() was omitted when setting CS in kernel_thread(). This was fixed when kernel_thread() was unified with 32 bit in f443ff4201dd25cd4dec183f9919ecba90c8edc2. Signed-off-by: Ian Campbell Cc: Christian Kujau Cc: Jeremy Fitzhardinge Cc: Cyrill Gorcunov Cc: Brian Gerst LKML-Reference: <1263377768-19600-2-git-send-email-ian.campbell@citrix.com> Signed-off-by: Ingo Molnar --- arch/x86/xen/enlighten.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'arch/x86') diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c index 2b26dd5930c..36daccb6864 100644 --- a/arch/x86/xen/enlighten.c +++ b/arch/x86/xen/enlighten.c @@ -1151,9 +1151,13 @@ asmlinkage void __init xen_start_kernel(void) /* keep using Xen gdt for now; no urgent need to change it */ +#ifdef CONFIG_X86_32 pv_info.kernel_rpl = 1; if (xen_feature(XENFEAT_supervisor_mode_kernel)) pv_info.kernel_rpl = 0; +#else + pv_info.kernel_rpl = 0; +#endif /* set the limit of our address space */ xen_reserve_top(); -- cgit v1.2.3-70-g09d2 From 7a1110e861b2666ac09f5708d6fbe71d18ce64bb Mon Sep 17 00:00:00 2001 From: Jack Steiner Date: Tue, 12 Jan 2010 15:09:04 -0600 Subject: x86, uv: Add function retrieving node controller revision number Add function for determining the revision id of the SGI UV node controller chip (HUB). This function is needed in a subsequent patch. Signed-off-by: Jack Steiner LKML-Reference: <20100112210904.GA24546@sgi.com> Signed-off-by: H. Peter Anvin --- arch/x86/include/asm/uv/uv_hub.h | 12 ++++++++++++ arch/x86/kernel/apic/x2apic_uv_x.c | 6 ++++++ 2 files changed, 18 insertions(+) (limited to 'arch/x86') diff --git a/arch/x86/include/asm/uv/uv_hub.h b/arch/x86/include/asm/uv/uv_hub.h index bc54fa965af..40be813fefb 100644 --- a/arch/x86/include/asm/uv/uv_hub.h +++ b/arch/x86/include/asm/uv/uv_hub.h @@ -495,5 +495,17 @@ static inline void uv_hub_send_ipi(int pnode, int apicid, int vector) uv_write_global_mmr64(pnode, UVH_IPI_INT, val); } +/* + * Get the minimum revision number of the hub chips within the partition. + * 1 - initial rev 1.0 silicon + * 2 - rev 2.0 production silicon + */ +static inline int uv_get_min_hub_revision_id(void) +{ + extern int uv_min_hub_revision_id; + + return uv_min_hub_revision_id; +} + #endif /* CONFIG_X86_64 */ #endif /* _ASM_X86_UV_UV_HUB_H */ diff --git a/arch/x86/kernel/apic/x2apic_uv_x.c b/arch/x86/kernel/apic/x2apic_uv_x.c index b8bb869a661..0e48de9ff86 100644 --- a/arch/x86/kernel/apic/x2apic_uv_x.c +++ b/arch/x86/kernel/apic/x2apic_uv_x.c @@ -36,6 +36,8 @@ DEFINE_PER_CPU(int, x2apic_extra_bits); static enum uv_system_type uv_system_type; static u64 gru_start_paddr, gru_end_paddr; +int uv_min_hub_revision_id; +EXPORT_SYMBOL_GPL(uv_min_hub_revision_id); static inline bool is_GRU_range(u64 start, u64 end) { @@ -55,6 +57,10 @@ static int early_get_nodeid(void) mmr = early_ioremap(UV_LOCAL_MMR_BASE | UVH_NODE_ID, sizeof(*mmr)); node_id.v = *mmr; early_iounmap(mmr, sizeof(*mmr)); + + /* Currently, all blades have same revision number */ + uv_min_hub_revision_id = node_id.s.revision; + return node_id.s.node_id; } -- cgit v1.2.3-70-g09d2 From 1d2c867c941d635e53e8ad7bf37d060bb5b25ec5 Mon Sep 17 00:00:00 2001 From: Russ Anderson Date: Fri, 15 Jan 2010 12:09:09 -0600 Subject: x86, uv: Ensure hub revision set for all ACPI modes. Ensure that UV hub revision is set for all ACPI modes. Signed-off-by: Russ Anderson LKML-Reference: <20100115180908.GB7757@sgi.com> Signed-off-by: H. Peter Anvin --- arch/x86/kernel/apic/x2apic_uv_x.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'arch/x86') diff --git a/arch/x86/kernel/apic/x2apic_uv_x.c b/arch/x86/kernel/apic/x2apic_uv_x.c index 0e48de9ff86..21db3cbea7d 100644 --- a/arch/x86/kernel/apic/x2apic_uv_x.c +++ b/arch/x86/kernel/apic/x2apic_uv_x.c @@ -66,7 +66,10 @@ static int early_get_nodeid(void) static int __init uv_acpi_madt_oem_check(char *oem_id, char *oem_table_id) { + int nodeid; + if (!strcmp(oem_id, "SGI")) { + nodeid = early_get_nodeid(); x86_platform.is_untracked_pat_range = uv_is_untracked_pat_range; if (!strcmp(oem_table_id, "UVL")) uv_system_type = UV_LEGACY_APIC; @@ -74,7 +77,7 @@ static int __init uv_acpi_madt_oem_check(char *oem_id, char *oem_table_id) uv_system_type = UV_X2APIC; else if (!strcmp(oem_table_id, "UVH")) { __get_cpu_var(x2apic_extra_bits) = - early_get_nodeid() << (UV_APIC_PNODE_SHIFT - 1); + nodeid << (UV_APIC_PNODE_SHIFT - 1); uv_system_type = UV_NON_UNIQUE_APIC; return 1; } -- cgit v1.2.3-70-g09d2