From f244baa3cafb4a49934d1fd944e29885a0fdbc3e Mon Sep 17 00:00:00 2001 From: Saeed Bishara Date: Tue, 29 Jan 2008 11:33:32 -1100 Subject: [ARM] Orion: Use the sata_mv driver for the integrated SATA controller This patch adds instantiation for the sata_mv driver, enabling the integrated SATA controller. Signed-off-by: Saeed Bishara Signed-off-by: Nicolas Pitre --- arch/arm/mach-orion/common.c | 36 ++++++++++++++++++++++++++++++++++- arch/arm/mach-orion/common.h | 8 ++++++++ arch/arm/mach-orion/rd88f5182-setup.c | 9 +++++++++ 3 files changed, 52 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-orion/common.c b/arch/arm/mach-orion/common.c index 5e20b6b3250..5f41fc537fa 100644 --- a/arch/arm/mach-orion/common.c +++ b/arch/arm/mach-orion/common.c @@ -19,7 +19,7 @@ #include #include #include -#include +#include #include "common.h" /***************************************************************************** @@ -249,6 +249,40 @@ static struct platform_device orion_i2c = { }, }; +/***************************************************************************** + * Sata port + ****************************************************************************/ +static struct resource orion_sata_resources[] = { + { + .name = "sata base", + .start = ORION_SATA_REG_BASE, + .end = ORION_SATA_REG_BASE + 0x5000 - 1, + .flags = IORESOURCE_MEM, + }, + { + .name = "sata irq", + .start = IRQ_ORION_SATA, + .end = IRQ_ORION_SATA, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device orion_sata = { + .name = "sata_mv", + .id = 0, + .dev = { + .coherent_dma_mask = 0xffffffff, + }, + .num_resources = ARRAY_SIZE(orion_sata_resources), + .resource = orion_sata_resources, +}; + +void __init orion_sata_init(struct mv_sata_platform_data *sata_data) +{ + orion_sata.dev.platform_data = sata_data; + platform_device_register(&orion_sata); +} + /***************************************************************************** * General ****************************************************************************/ diff --git a/arch/arm/mach-orion/common.h b/arch/arm/mach-orion/common.h index 06c10c06f03..10154ec885d 100644 --- a/arch/arm/mach-orion/common.h +++ b/arch/arm/mach-orion/common.h @@ -75,4 +75,12 @@ struct mv643xx_eth_platform_data; void __init orion_eth_init(struct mv643xx_eth_platform_data *eth_data); +/* + * Orion Sata platform_data, used by machine-setup + */ + +struct mv_sata_platform_data; + +void __init orion_sata_init(struct mv_sata_platform_data *sata_data); + #endif /* __ARCH_ORION_COMMON_H__ */ diff --git a/arch/arm/mach-orion/rd88f5182-setup.c b/arch/arm/mach-orion/rd88f5182-setup.c index 026d74325d0..797c54c80c2 100644 --- a/arch/arm/mach-orion/rd88f5182-setup.c +++ b/arch/arm/mach-orion/rd88f5182-setup.c @@ -17,6 +17,7 @@ #include #include #include +#include #include #include #include @@ -229,6 +230,13 @@ static struct i2c_board_info __initdata rd88f5182_i2c_rtc = { .addr = 0x68, }; +/***************************************************************************** + * Sata + ****************************************************************************/ +static struct mv_sata_platform_data rd88f5182_sata_data = { + .n_ports = 2, +}; + /***************************************************************************** * General Setup ****************************************************************************/ @@ -292,6 +300,7 @@ static void __init rd88f5182_init(void) platform_add_devices(rd88f5182_devices, ARRAY_SIZE(rd88f5182_devices)); i2c_register_board_info(0, &rd88f5182_i2c_rtc, 1); orion_eth_init(&rd88f5182_eth_data); + orion_sata_init(&rd88f5182_sata_data); } MACHINE_START(RD88F5182, "Marvell Orion-NAS Reference Design") -- cgit v1.2.3-70-g09d2 From 3c96e5a440d45c3d858082e531ded24d5cc06f68 Mon Sep 17 00:00:00 2001 From: Nicolas Pitre Date: Thu, 7 Feb 2008 14:25:08 -0500 Subject: [ARM] Orion: update defconfig Signed-off-by: Nicolas Pitre --- arch/arm/configs/orion_defconfig | 93 ++++++++++++++++++++-------------------- 1 file changed, 46 insertions(+), 47 deletions(-) (limited to 'arch') diff --git a/arch/arm/configs/orion_defconfig b/arch/arm/configs/orion_defconfig index 17a55def110..1e5aaa645fc 100644 --- a/arch/arm/configs/orion_defconfig +++ b/arch/arm/configs/orion_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.24-rc3 -# Wed Nov 28 15:13:57 2007 +# Linux kernel version: 2.6.24 +# Thu Feb 7 14:10:30 2008 # CONFIG_ARM=y CONFIG_SYS_SUPPORTS_APM_EMULATION=y @@ -63,17 +63,26 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y +CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_KPROBES=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 @@ -101,6 +110,8 @@ CONFIG_IOSCHED_CFQ=y CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" +CONFIG_CLASSIC_RCU=y +# CONFIG_PREEMPT_RCU is not set # # System Type @@ -139,6 +150,7 @@ CONFIG_ARCH_ORION=y # CONFIG_ARCH_LH7A40X is not set # CONFIG_ARCH_DAVINCI is not set # CONFIG_ARCH_OMAP is not set +# CONFIG_ARCH_MSM7X00A is not set # # Orion Implementations @@ -226,6 +238,7 @@ CONFIG_ZBOOT_ROM_BSS=0x0 CONFIG_CMDLINE="" # CONFIG_XIP_KERNEL is not set # CONFIG_KEXEC is not set +# CONFIG_ATAGS_PROC is not set # # Floating point emulation @@ -250,7 +263,7 @@ CONFIG_BINFMT_ELF=y # Power management options # # CONFIG_PM is not set -CONFIG_SUSPEND_UP_POSSIBLE=y +CONFIG_ARCH_SUSPEND_POSSIBLE=y # # Networking @@ -267,6 +280,7 @@ CONFIG_XFRM=y # CONFIG_XFRM_USER is not set # CONFIG_XFRM_SUB_POLICY is not set # CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set # CONFIG_NET_KEY is not set CONFIG_INET=y CONFIG_IP_MULTICAST=y @@ -322,6 +336,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_NET_PKTGEN=m # CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set @@ -475,7 +490,7 @@ CONFIG_SCSI=y CONFIG_SCSI_DMA=y # CONFIG_SCSI_TGT is not set # CONFIG_SCSI_NETLINK is not set -CONFIG_SCSI_PROC_FS=y +# CONFIG_SCSI_PROC_FS is not set # # SCSI support type (disk, tape, CD-ROM) @@ -483,15 +498,15 @@ CONFIG_SCSI_PROC_FS=y CONFIG_BLK_DEV_SD=y # CONFIG_CHR_DEV_ST is not set # CONFIG_CHR_DEV_OSST is not set -CONFIG_BLK_DEV_SR=y +CONFIG_BLK_DEV_SR=m # CONFIG_BLK_DEV_SR_VENDOR is not set -CONFIG_CHR_DEV_SG=y +CONFIG_CHR_DEV_SG=m # CONFIG_CHR_DEV_SCH is not set # # Some SCSI devices (e.g. CD jukebox) support multiple LUNs # -CONFIG_SCSI_MULTI_LUN=y +# CONFIG_SCSI_MULTI_LUN is not set # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set # CONFIG_SCSI_SCAN_ASYNC is not set @@ -528,16 +543,6 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set # CONFIG_SCSI_STEX is not set -CONFIG_SCSI_MVSATA=y - -# -# Sata options -# -# CONFIG_MV_SATA_SUPPORT_ATAPI is not set -# CONFIG_MV_SATA_ENABLE_1MB_IOS is not set -CONFIG_SATA_NO_DEBUG=y -# CONFIG_SATA_DEBUG_ON_ERROR is not set -# CONFIG_SATA_FULL_DEBUG is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_IPR is not set # CONFIG_SCSI_QLOGIC_1280 is not set @@ -549,12 +554,12 @@ CONFIG_SATA_NO_DEBUG=y # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_SRP is not set -CONFIG_ATA=m +CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set # CONFIG_SATA_AHCI is not set # CONFIG_SATA_SVW is not set # CONFIG_ATA_PIIX is not set -# CONFIG_SATA_MV is not set +CONFIG_SATA_MV=y # CONFIG_SATA_NV is not set # CONFIG_PDC_ADMA is not set # CONFIG_SATA_QSTOR is not set @@ -590,6 +595,7 @@ CONFIG_ATA=m # CONFIG_PATA_MPIIX is not set # CONFIG_PATA_OLDPIIX is not set # CONFIG_PATA_NETCELL is not set +# CONFIG_PATA_NINJA32 is not set # CONFIG_PATA_NS87410 is not set # CONFIG_PATA_NS87415 is not set # CONFIG_PATA_OPTI is not set @@ -622,7 +628,6 @@ CONFIG_NETDEVICES=y # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set # CONFIG_VETH is not set -# CONFIG_IP1000 is not set # CONFIG_ARCNET is not set # CONFIG_PHYLIB is not set CONFIG_NET_ETHERNET=y @@ -653,6 +658,7 @@ CONFIG_E100=y # CONFIG_NE2K_PCI is not set # CONFIG_8139CP is not set # CONFIG_8139TOO is not set +# CONFIG_R6040 is not set # CONFIG_SIS900 is not set # CONFIG_EPIC100 is not set # CONFIG_SUNDANCE is not set @@ -666,6 +672,9 @@ CONFIG_E1000=y CONFIG_E1000_NAPI=y # CONFIG_E1000_DISABLE_PACKET_SPLIT is not set # CONFIG_E1000E is not set +# CONFIG_E1000E_ENABLED is not set +# CONFIG_IP1000 is not set +# CONFIG_IGB is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -691,6 +700,7 @@ CONFIG_NETDEV_10000=y # CONFIG_NIU is not set # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set +# CONFIG_BNX2X is not set # CONFIG_TR is not set # @@ -713,7 +723,6 @@ CONFIG_NETDEV_10000=y # CONFIG_PPP is not set # CONFIG_SLIP is not set # CONFIG_NET_FC is not set -# CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set @@ -761,6 +770,7 @@ CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y # CONFIG_VT_HW_CONSOLE_BINDING is not set # CONFIG_SERIAL_NONSTANDARD is not set +# CONFIG_NOZOMI is not set # # Serial drivers @@ -832,13 +842,12 @@ CONFIG_I2C_MV64XXX=y # # Miscellaneous I2C Chip support # -# CONFIG_SENSORS_DS1337 is not set -# CONFIG_SENSORS_DS1374 is not set # CONFIG_DS1682 is not set # CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set -# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCF8591 is not set +# CONFIG_TPS65010 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set @@ -967,6 +976,7 @@ CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y CONFIG_USB=y # CONFIG_USB_DEBUG is not set +# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set # # Miscellaneous USB options @@ -980,16 +990,12 @@ CONFIG_USB_DEVICE_CLASS=y # USB Host Controller Drivers # CONFIG_USB_EHCI_HCD=y -CONFIG_USB_EHCI_SPLIT_ISO=y CONFIG_USB_EHCI_ROOT_HUB_TT=y CONFIG_USB_EHCI_TT_NEWSCHED=y # CONFIG_USB_ISP116X_HCD is not set -CONFIG_USB_OHCI_HCD=y -# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set -# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set -CONFIG_USB_OHCI_LITTLE_ENDIAN=y -CONFIG_USB_UHCI_HCD=y -CONFIG_USB_SL811_HCD=y +# CONFIG_USB_OHCI_HCD is not set +# CONFIG_USB_UHCI_HCD is not set +# CONFIG_USB_SL811_HCD is not set # CONFIG_USB_R8A66597_HCD is not set # @@ -1029,10 +1035,6 @@ CONFIG_USB_STORAGE_JUMPSHOT=y # # USB port drivers # - -# -# USB Serial Converter support -# # CONFIG_USB_SERIAL is not set # @@ -1058,14 +1060,6 @@ CONFIG_USB_STORAGE_JUMPSHOT=y # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set - -# -# USB DSL modem support -# - -# -# USB Gadget Support -# # CONFIG_USB_GADGET is not set # CONFIG_MMC is not set CONFIG_NEW_LEDS=y @@ -1120,9 +1114,10 @@ CONFIG_RTC_DRV_M41T80=y # Platform RTC drivers # # CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1511 is not set # CONFIG_RTC_DRV_DS1553 is not set -# CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_M48T86 is not set # CONFIG_RTC_DRV_M48T59 is not set # CONFIG_RTC_DRV_V3020 is not set @@ -1298,9 +1293,6 @@ CONFIG_NLS_ISO8859_2=y # CONFIG_NLS_KOI8_U is not set # CONFIG_NLS_UTF8 is not set # CONFIG_DLM is not set -CONFIG_INSTRUMENTATION=y -# CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set # # Kernel hacking @@ -1327,6 +1319,7 @@ CONFIG_DEBUG_USER=y CONFIG_CRYPTO=y CONFIG_CRYPTO_ALGAPI=m CONFIG_CRYPTO_BLKCIPHER=m +# CONFIG_CRYPTO_SEQIV is not set CONFIG_CRYPTO_MANAGER=m # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set @@ -1344,6 +1337,9 @@ CONFIG_CRYPTO_CBC=m CONFIG_CRYPTO_PCBC=m # CONFIG_CRYPTO_LRW is not set # CONFIG_CRYPTO_XTS is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_CCM is not set # CONFIG_CRYPTO_CRYPTD is not set # CONFIG_CRYPTO_DES is not set # CONFIG_CRYPTO_FCRYPT is not set @@ -1358,13 +1354,16 @@ CONFIG_CRYPTO_PCBC=m # CONFIG_CRYPTO_KHAZAD is not set # CONFIG_CRYPTO_ANUBIS is not set # CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SALSA20 is not set # CONFIG_CRYPTO_DEFLATE is not set # CONFIG_CRYPTO_MICHAEL_MIC is not set # CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_TEST is not set # CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=y +# CONFIG_CRYPTO_DEV_HIFN_795X is not set # # Library routines -- cgit v1.2.3-70-g09d2 From 7f74c2c7f760fdd44116e3dd90a5aeeb9d9333c7 Mon Sep 17 00:00:00 2001 From: Lennert Buytenhek Date: Thu, 7 Feb 2008 21:55:17 +0100 Subject: [ARM] Orion: distinguish between physical and virtual addresses Hack up the Orion port to distinguish between virtual and physical addresses of register windows. This will allow moving virtual mappings higher up in the address space, to free up more kernel virtual address space. Signed-off-by: Lennert Buytenhek Signed-off-by: Nicolas Pitre --- arch/arm/mach-orion/addr-map.c | 14 ++--- arch/arm/mach-orion/common.c | 52 ++++++++-------- arch/arm/mach-orion/db88f5281-setup.c | 4 +- arch/arm/mach-orion/dns323-setup.c | 8 +-- arch/arm/mach-orion/kurobox_pro-setup.c | 8 +-- arch/arm/mach-orion/pci.c | 10 +-- arch/arm/mach-orion/rd88f5182-setup.c | 8 +-- arch/arm/mach-orion/ts209-setup.c | 10 +-- include/asm-arm/arch-orion/debug-macro.S | 9 ++- include/asm-arm/arch-orion/entry-macro.S | 4 +- include/asm-arm/arch-orion/hardware.h | 13 ++-- include/asm-arm/arch-orion/orion.h | 102 +++++++++++++++++++------------ include/asm-arm/arch-orion/uncompress.h | 4 +- 13 files changed, 135 insertions(+), 111 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-orion/addr-map.c b/arch/arm/mach-orion/addr-map.c index 488da3811a6..2e2fd63643c 100644 --- a/arch/arm/mach-orion/addr-map.c +++ b/arch/arm/mach-orion/addr-map.c @@ -265,15 +265,15 @@ void __init orion_setup_cpu_wins(void) } /* - * Setup windows for PCI+PCIE IO+MAM space + * Setup windows for PCI+PCIe IO+MEM space. */ - orion_setup_cpu_win(ORION_PCIE_IO, ORION_PCIE_IO_BASE, - ORION_PCIE_IO_SIZE, ORION_PCIE_IO_REMAP); - orion_setup_cpu_win(ORION_PCI_IO, ORION_PCI_IO_BASE, - ORION_PCI_IO_SIZE, ORION_PCI_IO_REMAP); - orion_setup_cpu_win(ORION_PCIE_MEM, ORION_PCIE_MEM_BASE, + orion_setup_cpu_win(ORION_PCIE_IO, ORION_PCIE_IO_PHYS_BASE, + ORION_PCIE_IO_SIZE, ORION_PCIE_IO_BUS_BASE); + orion_setup_cpu_win(ORION_PCI_IO, ORION_PCI_IO_PHYS_BASE, + ORION_PCI_IO_SIZE, ORION_PCI_IO_BUS_BASE); + orion_setup_cpu_win(ORION_PCIE_MEM, ORION_PCIE_MEM_PHYS_BASE, ORION_PCIE_MEM_SIZE, -1); - orion_setup_cpu_win(ORION_PCI_MEM, ORION_PCI_MEM_BASE, + orion_setup_cpu_win(ORION_PCI_MEM, ORION_PCI_MEM_PHYS_BASE, ORION_PCI_MEM_SIZE, -1); } diff --git a/arch/arm/mach-orion/common.c b/arch/arm/mach-orion/common.c index 5f41fc537fa..5f0ee4b8a9b 100644 --- a/arch/arm/mach-orion/common.c +++ b/arch/arm/mach-orion/common.c @@ -27,26 +27,26 @@ ****************************************************************************/ static struct map_desc orion_io_desc[] __initdata = { { - .virtual = ORION_REGS_BASE, - .pfn = __phys_to_pfn(ORION_REGS_BASE), + .virtual = ORION_REGS_VIRT_BASE, + .pfn = __phys_to_pfn(ORION_REGS_PHYS_BASE), .length = ORION_REGS_SIZE, .type = MT_DEVICE }, { - .virtual = ORION_PCIE_IO_BASE, - .pfn = __phys_to_pfn(ORION_PCIE_IO_BASE), + .virtual = ORION_PCIE_IO_VIRT_BASE, + .pfn = __phys_to_pfn(ORION_PCIE_IO_PHYS_BASE), .length = ORION_PCIE_IO_SIZE, .type = MT_DEVICE }, { - .virtual = ORION_PCI_IO_BASE, - .pfn = __phys_to_pfn(ORION_PCI_IO_BASE), + .virtual = ORION_PCI_IO_VIRT_BASE, + .pfn = __phys_to_pfn(ORION_PCI_IO_PHYS_BASE), .length = ORION_PCI_IO_SIZE, .type = MT_DEVICE }, { - .virtual = ORION_PCIE_WA_BASE, - .pfn = __phys_to_pfn(ORION_PCIE_WA_BASE), + .virtual = ORION_PCIE_WA_VIRT_BASE, + .pfn = __phys_to_pfn(ORION_PCIE_WA_PHYS_BASE), .length = ORION_PCIE_WA_SIZE, .type = MT_DEVICE }, @@ -63,8 +63,8 @@ void __init orion_map_io(void) static struct resource orion_uart_resources[] = { { - .start = UART0_BASE, - .end = UART0_BASE + 0xff, + .start = UART0_PHYS_BASE, + .end = UART0_PHYS_BASE + 0xff, .flags = IORESOURCE_MEM, }, { @@ -73,8 +73,8 @@ static struct resource orion_uart_resources[] = { .flags = IORESOURCE_IRQ, }, { - .start = UART1_BASE, - .end = UART1_BASE + 0xff, + .start = UART1_PHYS_BASE, + .end = UART1_PHYS_BASE + 0xff, .flags = IORESOURCE_MEM, }, { @@ -86,8 +86,8 @@ static struct resource orion_uart_resources[] = { static struct plat_serial8250_port orion_uart_data[] = { { - .mapbase = UART0_BASE, - .membase = (char *)UART0_BASE, + .mapbase = UART0_PHYS_BASE, + .membase = (char *)UART0_VIRT_BASE, .irq = IRQ_ORION_UART0, .flags = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF, .iotype = UPIO_MEM, @@ -95,8 +95,8 @@ static struct plat_serial8250_port orion_uart_data[] = { .uartclk = ORION_TCLK, }, { - .mapbase = UART1_BASE, - .membase = (char *)UART1_BASE, + .mapbase = UART1_PHYS_BASE, + .membase = (char *)UART1_VIRT_BASE, .irq = IRQ_ORION_UART1, .flags = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF, .iotype = UPIO_MEM, @@ -122,8 +122,8 @@ static struct platform_device orion_uart = { static struct resource orion_ehci0_resources[] = { { - .start = ORION_USB0_REG_BASE, - .end = ORION_USB0_REG_BASE + SZ_4K, + .start = ORION_USB0_PHYS_BASE, + .end = ORION_USB0_PHYS_BASE + SZ_4K, .flags = IORESOURCE_MEM, }, { @@ -135,8 +135,8 @@ static struct resource orion_ehci0_resources[] = { static struct resource orion_ehci1_resources[] = { { - .start = ORION_USB1_REG_BASE, - .end = ORION_USB1_REG_BASE + SZ_4K, + .start = ORION_USB1_PHYS_BASE, + .end = ORION_USB1_PHYS_BASE + SZ_4K, .flags = IORESOURCE_MEM, }, { @@ -177,8 +177,8 @@ static struct platform_device orion_ehci1 = { static struct resource orion_eth_shared_resources[] = { { - .start = ORION_ETH_REG_BASE, - .end = ORION_ETH_REG_BASE + 0xffff, + .start = ORION_ETH_PHYS_BASE, + .end = ORION_ETH_PHYS_BASE + 0xffff, .flags = IORESOURCE_MEM, }, }; @@ -227,8 +227,8 @@ static struct mv64xxx_i2c_pdata orion_i2c_pdata = { static struct resource orion_i2c_resources[] = { { .name = "i2c base", - .start = I2C_BASE, - .end = I2C_BASE + 0x20 -1, + .start = I2C_PHYS_BASE, + .end = I2C_PHYS_BASE + 0x20 -1, .flags = IORESOURCE_MEM, }, { @@ -255,8 +255,8 @@ static struct platform_device orion_i2c = { static struct resource orion_sata_resources[] = { { .name = "sata base", - .start = ORION_SATA_REG_BASE, - .end = ORION_SATA_REG_BASE + 0x5000 - 1, + .start = ORION_SATA_PHYS_BASE, + .end = ORION_SATA_PHYS_BASE + 0x5000 - 1, .flags = IORESOURCE_MEM, }, { diff --git a/arch/arm/mach-orion/db88f5281-setup.c b/arch/arm/mach-orion/db88f5281-setup.c index cb2a95ce5b5..5ef44e1a2d3 100644 --- a/arch/arm/mach-orion/db88f5281-setup.c +++ b/arch/arm/mach-orion/db88f5281-setup.c @@ -354,8 +354,8 @@ static void __init db88f5281_init(void) MACHINE_START(DB88F5281, "Marvell Orion-2 Development Board") /* Maintainer: Tzachi Perelstein */ - .phys_io = ORION_REGS_BASE, - .io_pg_offst = ((ORION_REGS_BASE) >> 18) & 0xfffc, + .phys_io = ORION_REGS_PHYS_BASE, + .io_pg_offst = ((ORION_REGS_VIRT_BASE) >> 18) & 0xfffc, .boot_params = 0x00000100, .init_machine = db88f5281_init, .map_io = orion_map_io, diff --git a/arch/arm/mach-orion/dns323-setup.c b/arch/arm/mach-orion/dns323-setup.c index c8a806f249c..02b280c2482 100644 --- a/arch/arm/mach-orion/dns323-setup.c +++ b/arch/arm/mach-orion/dns323-setup.c @@ -259,8 +259,8 @@ static void __init dns323_init(void) * * Open a special address decode windows for the PCIE WA. */ - orion_write(ORION_REGS_BASE | 0x20074, ORION_PCIE_WA_BASE); - orion_write(ORION_REGS_BASE | 0x20070, + orion_write(ORION_REGS_VIRT_BASE | 0x20074, ORION_PCIE_WA_PHYS_BASE); + orion_write(ORION_REGS_VIRT_BASE | 0x20070, (0x7941 | (((ORION_PCIE_WA_SIZE >> 16) - 1)) << 16)); /* set MPP to 0 as D-Link's 2.6.12.6 kernel did */ @@ -312,8 +312,8 @@ static void __init dns323_init(void) /* Warning: D-Link uses a wrong mach-type (=526) in their bootloader */ MACHINE_START(DNS323, "D-Link DNS-323") /* Maintainer: Herbert Valerio Riedel */ - .phys_io = ORION_REGS_BASE, - .io_pg_offst = ((ORION_REGS_BASE) >> 18) & 0xFFFC, + .phys_io = ORION_REGS_PHYS_BASE, + .io_pg_offst = ((ORION_REGS_VIRT_BASE) >> 18) & 0xFFFC, .boot_params = 0x00000100, .init_machine = dns323_init, .map_io = orion_map_io, diff --git a/arch/arm/mach-orion/kurobox_pro-setup.c b/arch/arm/mach-orion/kurobox_pro-setup.c index 2d812ed6b5c..9bdd987edbb 100644 --- a/arch/arm/mach-orion/kurobox_pro-setup.c +++ b/arch/arm/mach-orion/kurobox_pro-setup.c @@ -192,8 +192,8 @@ static void __init kurobox_pro_init(void) /* * Open a special address decode windows for the PCIE WA. */ - orion_write(ORION_REGS_BASE | 0x20074, ORION_PCIE_WA_BASE); - orion_write(ORION_REGS_BASE | 0x20070, (0x7941 | + orion_write(ORION_REGS_VIRT_BASE | 0x20074, ORION_PCIE_WA_PHYS_BASE); + orion_write(ORION_REGS_VIRT_BASE | 0x20070, (0x7941 | (((ORION_PCIE_WA_SIZE >> 16) - 1)) << 16)); /* @@ -224,8 +224,8 @@ static void __init kurobox_pro_init(void) MACHINE_START(KUROBOX_PRO, "Buffalo/Revogear Kurobox Pro") /* Maintainer: Ronen Shitrit */ - .phys_io = ORION_REGS_BASE, - .io_pg_offst = ((ORION_REGS_BASE) >> 18) & 0xFFFC, + .phys_io = ORION_REGS_PHYS_BASE, + .io_pg_offst = ((ORION_REGS_VIRT_BASE) >> 18) & 0xFFFC, .boot_params = 0x00000100, .init_machine = kurobox_pro_init, .map_io = orion_map_io, diff --git a/arch/arm/mach-orion/pci.c b/arch/arm/mach-orion/pci.c index 0498d7c69b3..b109bb46681 100644 --- a/arch/arm/mach-orion/pci.c +++ b/arch/arm/mach-orion/pci.c @@ -156,7 +156,7 @@ static int orion_pcie_rd_conf(struct pci_bus *bus, u32 devfn, int where, orion_pcie_id(&dev, &rev); if (dev == MV88F5181_DEV_ID || dev == MV88F5182_DEV_ID) { /* extended register space */ - pcie_addr = ORION_PCIE_WA_BASE; + pcie_addr = ORION_PCIE_WA_VIRT_BASE; pcie_addr |= PCIE_CONF_BUS(bus->number) | PCIE_CONF_DEV(PCI_SLOT(devfn)) | PCIE_CONF_FUNC(PCI_FUNC(devfn)) | @@ -241,7 +241,7 @@ static int orion_pcie_setup(struct pci_sys_data *sys) */ res[0].name = "PCI-EX I/O Space"; res[0].flags = IORESOURCE_IO; - res[0].start = ORION_PCIE_IO_REMAP; + res[0].start = ORION_PCIE_IO_BUS_BASE; res[0].end = res[0].start + ORION_PCIE_IO_SIZE - 1; if (request_resource(&ioport_resource, &res[0])) panic("Request PCIE IO resource failed\n"); @@ -252,7 +252,7 @@ static int orion_pcie_setup(struct pci_sys_data *sys) */ res[1].name = "PCI-EX Memory Space"; res[1].flags = IORESOURCE_MEM; - res[1].start = ORION_PCIE_MEM_BASE; + res[1].start = ORION_PCIE_MEM_PHYS_BASE; res[1].end = res[1].start + ORION_PCIE_MEM_SIZE - 1; if (request_resource(&iomem_resource, &res[1])) panic("Request PCIE Memory resource failed\n"); @@ -477,7 +477,7 @@ static int orion_pci_setup(struct pci_sys_data *sys) */ res[0].name = "PCI I/O Space"; res[0].flags = IORESOURCE_IO; - res[0].start = ORION_PCI_IO_REMAP; + res[0].start = ORION_PCI_IO_BUS_BASE; res[0].end = res[0].start + ORION_PCI_IO_SIZE - 1; if (request_resource(&ioport_resource, &res[0])) panic("Request PCI IO resource failed\n"); @@ -488,7 +488,7 @@ static int orion_pci_setup(struct pci_sys_data *sys) */ res[1].name = "PCI Memory Space"; res[1].flags = IORESOURCE_MEM; - res[1].start = ORION_PCI_MEM_BASE; + res[1].start = ORION_PCI_MEM_PHYS_BASE; res[1].end = res[1].start + ORION_PCI_MEM_SIZE - 1; if (request_resource(&iomem_resource, &res[1])) panic("Request PCI Memory resource failed\n"); diff --git a/arch/arm/mach-orion/rd88f5182-setup.c b/arch/arm/mach-orion/rd88f5182-setup.c index 797c54c80c2..e851b8ca5ac 100644 --- a/arch/arm/mach-orion/rd88f5182-setup.c +++ b/arch/arm/mach-orion/rd88f5182-setup.c @@ -263,8 +263,8 @@ static void __init rd88f5182_init(void) /* * Open a special address decode windows for the PCIE WA. */ - orion_write(ORION_REGS_BASE | 0x20074, ORION_PCIE_WA_BASE); - orion_write(ORION_REGS_BASE | 0x20070, (0x7941 | + orion_write(ORION_REGS_VIRT_BASE | 0x20074, ORION_PCIE_WA_PHYS_BASE); + orion_write(ORION_REGS_VIRT_BASE | 0x20070, (0x7941 | (((ORION_PCIE_WA_SIZE >> 16) - 1)) << 16)); /* @@ -305,8 +305,8 @@ static void __init rd88f5182_init(void) MACHINE_START(RD88F5182, "Marvell Orion-NAS Reference Design") /* Maintainer: Ronen Shitrit */ - .phys_io = ORION_REGS_BASE, - .io_pg_offst = ((ORION_REGS_BASE) >> 18) & 0xFFFC, + .phys_io = ORION_REGS_PHYS_BASE, + .io_pg_offst = ((ORION_REGS_VIRT_BASE) >> 18) & 0xFFFC, .boot_params = 0x00000100, .init_machine = rd88f5182_init, .map_io = orion_map_io, diff --git a/arch/arm/mach-orion/ts209-setup.c b/arch/arm/mach-orion/ts209-setup.c index e3e930efd15..8edb2ac0966 100644 --- a/arch/arm/mach-orion/ts209-setup.c +++ b/arch/arm/mach-orion/ts209-setup.c @@ -244,7 +244,7 @@ static struct platform_device *qnap_ts209_devices[] __initdata = { * QNAP TS-[12]09 specific power off method via UART1-attached PIC */ -#define UART1_REG(x) (UART1_BASE + ((UART_##x) << 2)) +#define UART1_REG(x) (UART1_VIRT_BASE + ((UART_##x) << 2)) static void qnap_ts209_power_off(void) { @@ -282,8 +282,8 @@ static void __init qnap_ts209_init(void) /* * Open a special address decode windows for the PCIE WA. */ - orion_write(ORION_REGS_BASE | 0x20074, ORION_PCIE_WA_BASE); - orion_write(ORION_REGS_BASE | 0x20070, (0x7941 | + orion_write(ORION_REGS_VIRT_BASE | 0x20074, ORION_PCIE_WA_PHYS_BASE); + orion_write(ORION_REGS_VIRT_BASE | 0x20070, (0x7941 | (((ORION_PCIE_WA_SIZE >> 16) - 1)) << 16)); /* @@ -325,8 +325,8 @@ static void __init qnap_ts209_init(void) MACHINE_START(TS209, "QNAP TS-109/TS-209") /* Maintainer: Byron Bradley */ - .phys_io = ORION_REGS_BASE, - .io_pg_offst = ((ORION_REGS_BASE) >> 18) & 0xFFFC, + .phys_io = ORION_REGS_PHYS_BASE, + .io_pg_offst = ((ORION_REGS_VIRT_BASE) >> 18) & 0xFFFC, .boot_params = 0x00000100, .init_machine = qnap_ts209_init, .map_io = orion_map_io, diff --git a/include/asm-arm/arch-orion/debug-macro.S b/include/asm-arm/arch-orion/debug-macro.S index e2a80641f21..2746220f5d8 100644 --- a/include/asm-arm/arch-orion/debug-macro.S +++ b/include/asm-arm/arch-orion/debug-macro.S @@ -8,9 +8,14 @@ * published by the Free Software Foundation. */ +#include + .macro addruart,rx - mov \rx, #0xf1000000 - orr \rx, \rx, #0x00012000 + mrc p15, 0, \rx, c1, c0 + tst \rx, #1 @ MMU enabled? + ldreq \rx, =ORION_REGS_PHYS_BASE + ldrne \rx, =ORION_REGS_VIRT_BASE + orr \rx, \rx, #0x00012000 .endm #define UART_SHIFT 2 diff --git a/include/asm-arm/arch-orion/entry-macro.S b/include/asm-arm/arch-orion/entry-macro.S index b76075a7e44..cda096b2acf 100644 --- a/include/asm-arm/arch-orion/entry-macro.S +++ b/include/asm-arm/arch-orion/entry-macro.S @@ -3,8 +3,8 @@ * * Low-level IRQ helper macros for Orion platforms * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any * warranty of any kind, whether express or implied. */ diff --git a/include/asm-arm/arch-orion/hardware.h b/include/asm-arm/arch-orion/hardware.h index 8a12d213fbd..65da374de73 100644 --- a/include/asm-arm/arch-orion/hardware.h +++ b/include/asm-arm/arch-orion/hardware.h @@ -4,7 +4,6 @@ * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. - * */ #ifndef __ASM_ARCH_HARDWARE_H__ @@ -12,13 +11,11 @@ #include "orion.h" -#define PCI_MEMORY_VADDR ORION_PCI_SYS_MEM_BASE -#define PCI_IO_VADDR ORION_PCI_SYS_IO_BASE +#define pcibios_assign_all_busses() 1 -#define pcibios_assign_all_busses() 1 +#define PCIBIOS_MIN_IO 0x00001000 +#define PCIBIOS_MIN_MEM 0x01000000 +#define PCIMEM_BASE ORION_PCIE_MEM_PHYS_BASE -#define PCIBIOS_MIN_IO 0x1000 -#define PCIBIOS_MIN_MEM 0x01000000 -#define PCIMEM_BASE PCI_MEMORY_VADDR /* mem base for VGA */ -#endif /* _ASM_ARCH_HARDWARE_H */ +#endif diff --git a/include/asm-arm/arch-orion/orion.h b/include/asm-arm/arch-orion/orion.h index f787f752e58..4a8025466a3 100644 --- a/include/asm-arm/arch-orion/orion.h +++ b/include/asm-arm/arch-orion/orion.h @@ -14,32 +14,40 @@ #ifndef __ASM_ARCH_ORION_H__ #define __ASM_ARCH_ORION_H__ -/******************************************************************************* +/***************************************************************************** * Orion Address Map - * Use the same mapping (1:1 virtual:physical) of internal registers and - * PCI system (PCI+PCIE) for all machines. - * Each machine defines the rest of its mapping (e.g. device bus flashes) - ******************************************************************************/ -#define ORION_REGS_BASE 0xf1000000 + * + * virt phys size + * f0000000 f0000000 16M PCIe WA space (Orion-NAS only) + * f1000000 f1000000 1M on-chip peripheral registers + * f2000000 f2000000 1M PCIe I/O space + * f2100000 f2100000 1M PCI I/O space + ****************************************************************************/ +#define ORION_REGS_PHYS_BASE 0xf1000000 +#define ORION_REGS_VIRT_BASE 0xf1000000 #define ORION_REGS_SIZE SZ_1M -#define ORION_PCI_SYS_MEM_BASE 0xe0000000 -#define ORION_PCIE_MEM_BASE ORION_PCI_SYS_MEM_BASE -#define ORION_PCIE_MEM_SIZE SZ_128M -#define ORION_PCI_MEM_BASE (ORION_PCIE_MEM_BASE + ORION_PCIE_MEM_SIZE) -#define ORION_PCI_MEM_SIZE SZ_128M - -#define ORION_PCI_SYS_IO_BASE 0xf2000000 -#define ORION_PCIE_IO_BASE ORION_PCI_SYS_IO_BASE +#define ORION_PCIE_IO_PHYS_BASE 0xf2000000 +#define ORION_PCIE_IO_VIRT_BASE 0xf2000000 +#define ORION_PCIE_IO_BUS_BASE 0x00000000 #define ORION_PCIE_IO_SIZE SZ_1M -#define ORION_PCIE_IO_REMAP (ORION_PCIE_IO_BASE - ORION_PCI_SYS_IO_BASE) -#define ORION_PCI_IO_BASE (ORION_PCIE_IO_BASE + ORION_PCIE_IO_SIZE) + +#define ORION_PCI_IO_PHYS_BASE 0xf2100000 +#define ORION_PCI_IO_VIRT_BASE 0xf2100000 +#define ORION_PCI_IO_BUS_BASE 0x00100000 #define ORION_PCI_IO_SIZE SZ_1M -#define ORION_PCI_IO_REMAP (ORION_PCI_IO_BASE - ORION_PCI_SYS_IO_BASE) + /* Relevant only for Orion-NAS */ -#define ORION_PCIE_WA_BASE 0xf0000000 +#define ORION_PCIE_WA_PHYS_BASE 0xf0000000 +#define ORION_PCIE_WA_VIRT_BASE 0xf0000000 #define ORION_PCIE_WA_SIZE SZ_16M +#define ORION_PCIE_MEM_PHYS_BASE 0xe0000000 +#define ORION_PCIE_MEM_SIZE SZ_128M + +#define ORION_PCI_MEM_PHYS_BASE 0xe8000000 +#define ORION_PCI_MEM_SIZE SZ_128M + /******************************************************************************* * Supported Devices & Revisions ******************************************************************************/ @@ -57,25 +65,42 @@ /******************************************************************************* * Orion Registers Map ******************************************************************************/ -#define ORION_DDR_REG_BASE (ORION_REGS_BASE | 0x00000) -#define ORION_DEV_BUS_REG_BASE (ORION_REGS_BASE | 0x10000) -#define ORION_BRIDGE_REG_BASE (ORION_REGS_BASE | 0x20000) -#define ORION_PCI_REG_BASE (ORION_REGS_BASE | 0x30000) -#define ORION_PCIE_REG_BASE (ORION_REGS_BASE | 0x40000) -#define ORION_USB0_REG_BASE (ORION_REGS_BASE | 0x50000) -#define ORION_ETH_REG_BASE (ORION_REGS_BASE | 0x70000) -#define ORION_SATA_REG_BASE (ORION_REGS_BASE | 0x80000) -#define ORION_USB1_REG_BASE (ORION_REGS_BASE | 0xa0000) - -#define ORION_DDR_REG(x) (ORION_DDR_REG_BASE | (x)) -#define ORION_DEV_BUS_REG(x) (ORION_DEV_BUS_REG_BASE | (x)) -#define ORION_BRIDGE_REG(x) (ORION_BRIDGE_REG_BASE | (x)) -#define ORION_PCI_REG(x) (ORION_PCI_REG_BASE | (x)) -#define ORION_PCIE_REG(x) (ORION_PCIE_REG_BASE | (x)) -#define ORION_USB0_REG(x) (ORION_USB0_REG_BASE | (x)) -#define ORION_USB1_REG(x) (ORION_USB1_REG_BASE | (x)) -#define ORION_ETH_REG(x) (ORION_ETH_REG_BASE | (x)) -#define ORION_SATA_REG(x) (ORION_SATA_REG_BASE | (x)) +#define ORION_DDR_VIRT_BASE (ORION_REGS_VIRT_BASE | 0x00000) +#define ORION_DDR_REG(x) (ORION_DDR_VIRT_BASE | (x)) + +#define ORION_DEV_BUS_PHYS_BASE (ORION_REGS_PHYS_BASE | 0x10000) +#define ORION_DEV_BUS_VIRT_BASE (ORION_REGS_VIRT_BASE | 0x10000) +#define ORION_DEV_BUS_REG(x) (ORION_DEV_BUS_VIRT_BASE | (x)) +#define I2C_PHYS_BASE (ORION_DEV_BUS_PHYS_BASE | 0x1000) +#define UART0_PHYS_BASE (ORION_DEV_BUS_PHYS_BASE | 0x2000) +#define UART0_VIRT_BASE (ORION_DEV_BUS_VIRT_BASE | 0x2000) +#define UART1_PHYS_BASE (ORION_DEV_BUS_PHYS_BASE | 0x2100) +#define UART1_VIRT_BASE (ORION_DEV_BUS_VIRT_BASE | 0x2100) + +#define ORION_BRIDGE_VIRT_BASE (ORION_REGS_VIRT_BASE | 0x20000) +#define ORION_BRIDGE_REG(x) (ORION_BRIDGE_VIRT_BASE | (x)) + +#define ORION_PCI_VIRT_BASE (ORION_REGS_VIRT_BASE | 0x30000) +#define ORION_PCI_REG(x) (ORION_PCI_VIRT_BASE | (x)) + +#define ORION_PCIE_VIRT_BASE (ORION_REGS_VIRT_BASE | 0x40000) +#define ORION_PCIE_REG(x) (ORION_PCIE_VIRT_BASE | (x)) + +#define ORION_USB0_PHYS_BASE (ORION_REGS_PHYS_BASE | 0x50000) +#define ORION_USB0_VIRT_BASE (ORION_REGS_VIRT_BASE | 0x50000) +#define ORION_USB0_REG(x) (ORION_USB0_VIRT_BASE | (x)) + +#define ORION_ETH_PHYS_BASE (ORION_REGS_PHYS_BASE | 0x70000) +#define ORION_ETH_VIRT_BASE (ORION_REGS_VIRT_BASE | 0x70000) +#define ORION_ETH_REG(x) (ORION_ETH_VIRT_BASE | (x)) + +#define ORION_SATA_PHYS_BASE (ORION_REGS_PHYS_BASE | 0x80000) +#define ORION_SATA_VIRT_BASE (ORION_REGS_VIRT_BASE | 0x80000) +#define ORION_SATA_REG(x) (ORION_SATA_VIRT_BASE | (x)) + +#define ORION_USB1_PHYS_BASE (ORION_REGS_PHYS_BASE | 0xa0000) +#define ORION_USB1_VIRT_BASE (ORION_REGS_VIRT_BASE | 0xa0000) +#define ORION_USB1_REG(x) (ORION_USB1_VIRT_BASE | (x)) /******************************************************************************* * Device Bus Registers @@ -100,9 +125,6 @@ #define DEV_BUS_CTRL ORION_DEV_BUS_REG(0x4c0) #define DEV_BUS_INT_CAUSE ORION_DEV_BUS_REG(0x4d0) #define DEV_BUS_INT_MASK ORION_DEV_BUS_REG(0x4d4) -#define I2C_BASE ORION_DEV_BUS_REG(0x1000) -#define UART0_BASE ORION_DEV_BUS_REG(0x2000) -#define UART1_BASE ORION_DEV_BUS_REG(0x2100) #define GPIO_MAX 32 /*************************************************************************** diff --git a/include/asm-arm/arch-orion/uncompress.h b/include/asm-arm/arch-orion/uncompress.h index 0cab78ad633..59f44039909 100644 --- a/include/asm-arm/arch-orion/uncompress.h +++ b/include/asm-arm/arch-orion/uncompress.h @@ -10,8 +10,8 @@ #include -#define MV_UART_LSR ((volatile unsigned char *)(UART0_BASE + 0x14)) -#define MV_UART_THR ((volatile unsigned char *)(UART0_BASE + 0x0)) +#define MV_UART_THR ((volatile unsigned char *)(UART0_PHYS_BASE + 0x0)) +#define MV_UART_LSR ((volatile unsigned char *)(UART0_PHYS_BASE + 0x14)) #define LSR_THRE 0x20 -- cgit v1.2.3-70-g09d2 From 3b277c2965b0c707b76f89368ebe6e6da6605c23 Mon Sep 17 00:00:00 2001 From: Byron Bradley Date: Fri, 8 Feb 2008 18:20:01 +0000 Subject: [ARM] Orion: Use the sata_mv driver for the Kurobox SATA The Kurobox has a two port integrated SATA controller. Use the sata_mv driver for this. Signed-off-by: Byron Bradley Signed-off-by: Nicolas Pitre --- arch/arm/mach-orion/kurobox_pro-setup.c | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-orion/kurobox_pro-setup.c b/arch/arm/mach-orion/kurobox_pro-setup.c index 9bdd987edbb..6817aca4aa2 100644 --- a/arch/arm/mach-orion/kurobox_pro-setup.c +++ b/arch/arm/mach-orion/kurobox_pro-setup.c @@ -17,6 +17,7 @@ #include #include #include +#include #include #include #include @@ -166,6 +167,13 @@ static struct i2c_board_info __initdata kurobox_pro_i2c_rtc = { .addr = 0x32, }; +/***************************************************************************** + * SATA + ****************************************************************************/ +static struct mv_sata_platform_data kurobox_pro_sata_data = { + .n_ports = 2, +}; + /***************************************************************************** * General Setup ****************************************************************************/ @@ -220,6 +228,7 @@ static void __init kurobox_pro_init(void) platform_add_devices(kurobox_pro_devices, ARRAY_SIZE(kurobox_pro_devices)); i2c_register_board_info(0, &kurobox_pro_i2c_rtc, 1); orion_eth_init(&kurobox_pro_eth_data); + orion_sata_init(&kurobox_pro_sata_data); } MACHINE_START(KUROBOX_PRO, "Buffalo/Revogear Kurobox Pro") -- cgit v1.2.3-70-g09d2 From ee44391eae5d1fabd6eacf89b3bb2e3fbc315e7d Mon Sep 17 00:00:00 2001 From: Byron Bradley Date: Fri, 8 Feb 2008 18:20:23 +0000 Subject: [ARM] Orion: Use the sata_mv driver for the TS-209 SATA The TS-209 has a two port integrated SATA controller. Use the sata_mv driver for this. Signed-off-by: Byron Bradley Signed-off-by: Nicolas Pitre --- arch/arm/mach-orion/ts209-setup.c | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-orion/ts209-setup.c b/arch/arm/mach-orion/ts209-setup.c index 8edb2ac0966..306dbcd1e37 100644 --- a/arch/arm/mach-orion/ts209-setup.c +++ b/arch/arm/mach-orion/ts209-setup.c @@ -21,6 +21,7 @@ #include #include #include +#include #include #include #include @@ -232,6 +233,14 @@ static struct platform_device qnap_ts209_button_device = { }; /***************************************************************************** + * SATA + ****************************************************************************/ +static struct mv_sata_platform_data qnap_ts209_sata_data = { + .n_ports = 2, +}; + +/***************************************************************************** + * General Setup ****************************************************************************/ @@ -321,6 +330,7 @@ static void __init qnap_ts209_init(void) ARRAY_SIZE(qnap_ts209_devices)); i2c_register_board_info(0, &qnap_ts209_i2c_rtc, 1); orion_eth_init(&qnap_ts209_eth_data); + orion_sata_init(&qnap_ts209_sata_data); } MACHINE_START(TS209, "QNAP TS-109/TS-209") -- cgit v1.2.3-70-g09d2 From 1cccd2a728673da00a05fe19c5ba4897257d6b8a Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Thu, 29 Nov 2007 15:38:16 -0800 Subject: ARM: OMAP: Request DSP memory for McBSP On OMAP1 some McBSP features depend on DSP. Also export polling functions as suggested by Luis Cargnini. Signed-off-by: Tony Lindgren --- arch/arm/plat-omap/mcbsp.c | 11 +++++++++++ 1 file changed, 11 insertions(+) (limited to 'arch') diff --git a/arch/arm/plat-omap/mcbsp.c b/arch/arm/plat-omap/mcbsp.c index 2af5bd5a134..9cf83c4da9f 100644 --- a/arch/arm/plat-omap/mcbsp.c +++ b/arch/arm/plat-omap/mcbsp.c @@ -201,6 +201,14 @@ static int omap_mcbsp_check(unsigned int id) static void omap_mcbsp_dsp_request(void) { if (cpu_is_omap15xx() || cpu_is_omap16xx()) { + int ret; + + ret = omap_dsp_request_mem(); + if (ret < 0) { + printk(KERN_ERR "Could not get dsp memory: %i\n", ret); + return; + } + clk_enable(mcbsp_dsp_ck); clk_enable(mcbsp_api_ck); @@ -219,6 +227,7 @@ static void omap_mcbsp_dsp_request(void) static void omap_mcbsp_dsp_free(void) { if (cpu_is_omap15xx() || cpu_is_omap16xx()) { + omap_dsp_release_mem(); clk_disable(mcbsp_dspxor_ck); clk_disable(mcbsp_dsp_ck); clk_disable(mcbsp_api_ck); @@ -1024,6 +1033,8 @@ EXPORT_SYMBOL(omap_mcbsp_set_io_type); EXPORT_SYMBOL(omap_mcbsp_free); EXPORT_SYMBOL(omap_mcbsp_start); EXPORT_SYMBOL(omap_mcbsp_stop); +EXPORT_SYMBOL(omap_mcbsp_pollread); +EXPORT_SYMBOL(omap_mcbsp_pollwrite); EXPORT_SYMBOL(omap_mcbsp_xmit_word); EXPORT_SYMBOL(omap_mcbsp_recv_word); EXPORT_SYMBOL(omap_mcbsp_xmit_buffer); -- cgit v1.2.3-70-g09d2 From 5492fb1a46ada0d1e89eb580c2a56db8924e3141 Mon Sep 17 00:00:00 2001 From: "Syed Mohammed, Khasim" Date: Thu, 29 Nov 2007 16:15:11 -0800 Subject: ARM: OMAP: Add 3430 gpio support This patch adds 3430 gpio support. It also contains a fix by Paul Walmsley to use the correct clock names for OMAP3430. Signed-off-by: Syed Mohammed Khasim Signed-off-by: Paul Walmsley Signed-off-by: Tony Lindgren --- arch/arm/plat-omap/gpio.c | 167 +++++++++++++++++++++++++++++++-------- include/asm-arm/arch-omap/gpio.h | 2 + 2 files changed, 134 insertions(+), 35 deletions(-) (limited to 'arch') diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c index b2a87b8ef67..7dd50a43fbc 100644 --- a/arch/arm/plat-omap/gpio.c +++ b/arch/arm/plat-omap/gpio.c @@ -117,17 +117,29 @@ #define OMAP24XX_GPIO_CLEARDATAOUT 0x0090 #define OMAP24XX_GPIO_SETDATAOUT 0x0094 +/* + * omap34xx specific GPIO registers + */ + +#define OMAP34XX_GPIO1_BASE (void __iomem *)0x48310000 +#define OMAP34XX_GPIO2_BASE (void __iomem *)0x49050000 +#define OMAP34XX_GPIO3_BASE (void __iomem *)0x49052000 +#define OMAP34XX_GPIO4_BASE (void __iomem *)0x49054000 +#define OMAP34XX_GPIO5_BASE (void __iomem *)0x49056000 +#define OMAP34XX_GPIO6_BASE (void __iomem *)0x49058000 + + struct gpio_bank { void __iomem *base; u16 irq; u16 virtual_irq_start; int method; u32 reserved_map; -#if defined (CONFIG_ARCH_OMAP16XX) || defined (CONFIG_ARCH_OMAP24XX) +#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) u32 suspend_wakeup; u32 saved_wakeup; #endif -#ifdef CONFIG_ARCH_OMAP24XX +#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) u32 non_wakeup_gpios; u32 enabled_non_wakeup_gpios; @@ -192,6 +204,18 @@ static struct gpio_bank gpio_bank_243x[5] = { #endif +#ifdef CONFIG_ARCH_OMAP34XX +static struct gpio_bank gpio_bank_34xx[6] = { + { OMAP34XX_GPIO1_BASE, INT_34XX_GPIO_BANK1, IH_GPIO_BASE, METHOD_GPIO_24XX }, + { OMAP34XX_GPIO2_BASE, INT_34XX_GPIO_BANK2, IH_GPIO_BASE + 32, METHOD_GPIO_24XX }, + { OMAP34XX_GPIO3_BASE, INT_34XX_GPIO_BANK3, IH_GPIO_BASE + 64, METHOD_GPIO_24XX }, + { OMAP34XX_GPIO4_BASE, INT_34XX_GPIO_BANK4, IH_GPIO_BASE + 96, METHOD_GPIO_24XX }, + { OMAP34XX_GPIO5_BASE, INT_34XX_GPIO_BANK5, IH_GPIO_BASE + 128, METHOD_GPIO_24XX }, + { OMAP34XX_GPIO6_BASE, INT_34XX_GPIO_BANK6, IH_GPIO_BASE + 160, METHOD_GPIO_24XX }, +}; + +#endif + static struct gpio_bank *gpio_bank; static int gpio_bank_count; @@ -222,6 +246,10 @@ static inline struct gpio_bank *get_gpio_bank(int gpio) if (cpu_is_omap24xx()) return &gpio_bank[gpio >> 5]; #endif +#ifdef CONFIG_ARCH_OMAP34XX + if (cpu_is_omap34xx()) + return &gpio_bank[gpio >> 5]; +#endif } static inline int get_gpio_index(int gpio) @@ -233,6 +261,10 @@ static inline int get_gpio_index(int gpio) #ifdef CONFIG_ARCH_OMAP24XX if (cpu_is_omap24xx()) return gpio & 0x1f; +#endif +#ifdef CONFIG_ARCH_OMAP34XX + if (cpu_is_omap34xx()) + return gpio & 0x1f; #endif return gpio & 0x0f; } @@ -263,6 +295,10 @@ static inline int gpio_valid(int gpio) #ifdef CONFIG_ARCH_OMAP24XX if (cpu_is_omap24xx() && gpio < 128) return 0; +#endif +#ifdef CONFIG_ARCH_OMAP34XX + if (cpu_is_omap34xx() && gpio < 160) + return 0; #endif return -1; } @@ -303,7 +339,7 @@ static void _set_gpio_direction(struct gpio_bank *bank, int gpio, int is_input) reg += OMAP730_GPIO_DIR_CONTROL; break; #endif -#ifdef CONFIG_ARCH_OMAP24XX +#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) case METHOD_GPIO_24XX: reg += OMAP24XX_GPIO_OE; break; @@ -377,7 +413,7 @@ static void _set_gpio_dataout(struct gpio_bank *bank, int gpio, int enable) l &= ~(1 << gpio); break; #endif -#ifdef CONFIG_ARCH_OMAP24XX +#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) case METHOD_GPIO_24XX: if (enable) reg += OMAP24XX_GPIO_SETDATAOUT; @@ -435,7 +471,7 @@ int omap_get_gpio_datain(int gpio) reg += OMAP730_GPIO_DATA_INPUT; break; #endif -#ifdef CONFIG_ARCH_OMAP24XX +#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) case METHOD_GPIO_24XX: reg += OMAP24XX_GPIO_DATAIN; break; @@ -455,7 +491,7 @@ do { \ __raw_writel(l, base + reg); \ } while(0) -#ifdef CONFIG_ARCH_OMAP24XX +#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) static inline void set_24xx_gpio_triggering(struct gpio_bank *bank, int gpio, int trigger) { void __iomem *base = bank->base; @@ -547,7 +583,7 @@ static int _set_gpio_triggering(struct gpio_bank *bank, int gpio, int trigger) goto bad; break; #endif -#ifdef CONFIG_ARCH_OMAP24XX +#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) case METHOD_GPIO_24XX: set_24xx_gpio_triggering(bank, gpio, trigger); break; @@ -567,7 +603,7 @@ static int gpio_irq_type(unsigned irq, unsigned type) unsigned gpio; int retval; - if (!cpu_is_omap24xx() && irq > IH_MPUIO_BASE) + if (!cpu_class_is_omap2() && irq > IH_MPUIO_BASE) gpio = OMAP_MPUIO(irq - IH_MPUIO_BASE); else gpio = irq - IH_GPIO_BASE; @@ -579,7 +615,7 @@ static int gpio_irq_type(unsigned irq, unsigned type) return -EINVAL; /* OMAP1 allows only only edge triggering */ - if (!cpu_is_omap24xx() + if (!cpu_class_is_omap2() && (type & (IRQ_TYPE_LEVEL_LOW|IRQ_TYPE_LEVEL_HIGH))) return -EINVAL; @@ -620,7 +656,7 @@ static void _clear_gpio_irqbank(struct gpio_bank *bank, int gpio_mask) reg += OMAP730_GPIO_INT_STATUS; break; #endif -#ifdef CONFIG_ARCH_OMAP24XX +#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) case METHOD_GPIO_24XX: reg += OMAP24XX_GPIO_IRQSTATUS1; break; @@ -632,8 +668,10 @@ static void _clear_gpio_irqbank(struct gpio_bank *bank, int gpio_mask) __raw_writel(gpio_mask, reg); /* Workaround for clearing DSP GPIO interrupts to allow retention */ - if (cpu_is_omap2420()) +#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) + if (cpu_is_omap24xx() || cpu_is_omap34xx()) __raw_writel(gpio_mask, bank->base + OMAP24XX_GPIO_IRQSTATUS2); +#endif } static inline void _clear_gpio_irqstatus(struct gpio_bank *bank, int gpio) @@ -676,7 +714,7 @@ static u32 _get_gpio_irqbank_mask(struct gpio_bank *bank) inv = 1; break; #endif -#ifdef CONFIG_ARCH_OMAP24XX +#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) case METHOD_GPIO_24XX: reg += OMAP24XX_GPIO_IRQENABLE1; mask = 0xffffffff; @@ -739,7 +777,7 @@ static void _enable_gpio_irqbank(struct gpio_bank *bank, int gpio_mask, int enab l |= gpio_mask; break; #endif -#ifdef CONFIG_ARCH_OMAP24XX +#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) case METHOD_GPIO_24XX: if (enable) reg += OMAP24XX_GPIO_SETIRQENABLE1; @@ -785,7 +823,7 @@ static int _set_gpio_wakeup(struct gpio_bank *bank, int gpio, int enable) spin_unlock(&bank->lock); return 0; #endif -#ifdef CONFIG_ARCH_OMAP24XX +#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) case METHOD_GPIO_24XX: if (bank->non_wakeup_gpios & (1 << gpio)) { printk(KERN_ERR "Unable to modify wakeup on " @@ -891,7 +929,7 @@ void omap_free_gpio(int gpio) __raw_writel(1 << get_gpio_index(gpio), reg); } #endif -#ifdef CONFIG_ARCH_OMAP24XX +#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) if (bank->method == METHOD_GPIO_24XX) { /* Disable wake-up during idle for dynamic tick */ void __iomem *reg = bank->base + OMAP24XX_GPIO_CLEARWKUENA; @@ -940,7 +978,7 @@ static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc) if (bank->method == METHOD_GPIO_730) isr_reg = bank->base + OMAP730_GPIO_INT_STATUS; #endif -#ifdef CONFIG_ARCH_OMAP24XX +#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) if (bank->method == METHOD_GPIO_24XX) isr_reg = bank->base + OMAP24XX_GPIO_IRQSTATUS1; #endif @@ -954,7 +992,7 @@ static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc) if (cpu_is_omap15xx() && (bank->method == METHOD_MPUIO)) isr &= 0x0000ffff; - if (cpu_is_omap24xx()) { + if (cpu_class_is_omap2()) { level_mask = __raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT0) | @@ -1023,7 +1061,7 @@ static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc) } } - if (cpu_is_omap24xx()) { + if (cpu_class_is_omap2()) { /* clear level sensitive interrupts after handler(s) */ _enable_gpio_irqbank(bank, isr_saved & level_mask, 0); _clear_gpio_irqbank(bank, isr_saved & level_mask); @@ -1199,21 +1237,35 @@ static inline void mpuio_init(void) {} /*---------------------------------------------------------------------*/ static int initialized; +#if !defined(CONFIG_ARCH_OMAP3) static struct clk * gpio_ick; +#endif + +#if defined(CONFIG_ARCH_OMAP2) static struct clk * gpio_fck; +#endif -#ifdef CONFIG_ARCH_OMAP2430 +#if defined(CONFIG_ARCH_OMAP2430) static struct clk * gpio5_ick; static struct clk * gpio5_fck; #endif +#if defined(CONFIG_ARCH_OMAP3) +static struct clk *gpio_fclks[OMAP34XX_NR_GPIOS]; +static struct clk *gpio_iclks[OMAP34XX_NR_GPIOS]; +#endif + static int __init _omap_gpio_init(void) { int i; struct gpio_bank *bank; +#if defined(CONFIG_ARCH_OMAP3) + char clk_name[11]; +#endif initialized = 1; +#if defined(CONFIG_ARCH_OMAP1) if (cpu_is_omap15xx()) { gpio_ick = clk_get(NULL, "arm_gpio_ck"); if (IS_ERR(gpio_ick)) @@ -1221,7 +1273,9 @@ static int __init _omap_gpio_init(void) else clk_enable(gpio_ick); } - if (cpu_is_omap24xx()) { +#endif +#if defined(CONFIG_ARCH_OMAP2) + if (cpu_class_is_omap2()) { gpio_ick = clk_get(NULL, "gpios_ick"); if (IS_ERR(gpio_ick)) printk("Could not get gpios_ick\n"); @@ -1234,9 +1288,9 @@ static int __init _omap_gpio_init(void) clk_enable(gpio_fck); /* - * On 2430 GPIO 5 uses CORE L4 ICLK + * On 2430 & 3430 GPIO 5 uses CORE L4 ICLK */ -#ifdef CONFIG_ARCH_OMAP2430 +#if defined(CONFIG_ARCH_OMAP2430) if (cpu_is_omap2430()) { gpio5_ick = clk_get(NULL, "gpio5_ick"); if (IS_ERR(gpio5_ick)) @@ -1250,7 +1304,28 @@ static int __init _omap_gpio_init(void) clk_enable(gpio5_fck); } #endif -} + } +#endif + +#if defined(CONFIG_ARCH_OMAP3) + if (cpu_is_omap34xx()) { + for (i = 0; i < OMAP34XX_NR_GPIOS; i++) { + sprintf(clk_name, "gpio%d_ick", i + 1); + gpio_iclks[i] = clk_get(NULL, clk_name); + if (IS_ERR(gpio_iclks[i])) + printk(KERN_ERR "Could not get %s\n", clk_name); + else + clk_enable(gpio_iclks[i]); + sprintf(clk_name, "gpio%d_fck", i + 1); + gpio_fclks[i] = clk_get(NULL, clk_name); + if (IS_ERR(gpio_fclks[i])) + printk(KERN_ERR "Could not get %s\n", clk_name); + else + clk_enable(gpio_fclks[i]); + } + } +#endif + #ifdef CONFIG_ARCH_OMAP15XX if (cpu_is_omap15xx()) { @@ -1297,6 +1372,17 @@ static int __init _omap_gpio_init(void) printk(KERN_INFO "OMAP243x GPIO hardware version %d.%d\n", (rev >> 4) & 0x0f, rev & 0x0f); } +#endif +#ifdef CONFIG_ARCH_OMAP34XX + if (cpu_is_omap34xx()) { + int rev; + + gpio_bank_count = OMAP34XX_NR_GPIOS; + gpio_bank = gpio_bank_34xx; + rev = omap_readl(gpio_bank[0].base + OMAP24XX_GPIO_REVISION); + printk(KERN_INFO "OMAP34xx GPIO hardware version %d.%d\n", + (rev >> 4) & 0x0f, rev & 0x0f); + } #endif for (i = 0; i < gpio_bank_count; i++) { int j, gpio_count = 16; @@ -1328,7 +1414,7 @@ static int __init _omap_gpio_init(void) gpio_count = 32; /* 730 has 32-bit GPIOs */ } #endif -#ifdef CONFIG_ARCH_OMAP24XX +#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) if (bank->method == METHOD_GPIO_24XX) { static const u32 non_wakeup_gpios[] = { 0xe203ffc0, 0x08700040 @@ -1364,21 +1450,23 @@ static int __init _omap_gpio_init(void) if (cpu_is_omap16xx()) omap_writel(omap_readl(ULPD_CAM_CLK_CTRL) | 0x04, ULPD_CAM_CLK_CTRL); -#ifdef CONFIG_ARCH_OMAP24XX +#if defined(CONFIG_ARCH_OMAP24XX) /* Enable autoidle for the OCP interface */ if (cpu_is_omap24xx()) omap_writel(1 << 0, 0x48019010); +#elif defined(CONFIG_ARCH_OMAP34XX) + if (cpu_is_omap34xx()) + omap_writel(1 << 0, 0x48306814); #endif - return 0; } -#if defined (CONFIG_ARCH_OMAP16XX) || defined (CONFIG_ARCH_OMAP24XX) +#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) static int omap_gpio_suspend(struct sys_device *dev, pm_message_t mesg) { int i; - if (!cpu_is_omap24xx() && !cpu_is_omap16xx()) + if (!cpu_class_is_omap2() && !cpu_is_omap16xx()) return 0; for (i = 0; i < gpio_bank_count; i++) { @@ -1395,7 +1483,7 @@ static int omap_gpio_suspend(struct sys_device *dev, pm_message_t mesg) wake_set = bank->base + OMAP1610_GPIO_SET_WAKEUPENA; break; #endif -#ifdef CONFIG_ARCH_OMAP24XX +#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) case METHOD_GPIO_24XX: wake_status = bank->base + OMAP24XX_GPIO_SETWKUENA; wake_clear = bank->base + OMAP24XX_GPIO_CLEARWKUENA; @@ -1435,7 +1523,7 @@ static int omap_gpio_resume(struct sys_device *dev) wake_set = bank->base + OMAP1610_GPIO_SET_WAKEUPENA; break; #endif -#ifdef CONFIG_ARCH_OMAP24XX +#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) case METHOD_GPIO_24XX: wake_clear = bank->base + OMAP24XX_GPIO_CLEARWKUENA; wake_set = bank->base + OMAP24XX_GPIO_SETWKUENA; @@ -1467,7 +1555,7 @@ static struct sys_device omap_gpio_device = { #endif -#ifdef CONFIG_ARCH_OMAP24XX +#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) static int workaround_enabled; @@ -1483,15 +1571,19 @@ void omap2_gpio_prepare_for_retention(void) if (!(bank->enabled_non_wakeup_gpios)) continue; +#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) bank->saved_datain = __raw_readl(bank->base + OMAP24XX_GPIO_DATAIN); l1 = __raw_readl(bank->base + OMAP24XX_GPIO_FALLINGDETECT); l2 = __raw_readl(bank->base + OMAP24XX_GPIO_RISINGDETECT); +#endif bank->saved_fallingdetect = l1; bank->saved_risingdetect = l2; l1 &= ~bank->enabled_non_wakeup_gpios; l2 &= ~bank->enabled_non_wakeup_gpios; +#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) __raw_writel(l1, bank->base + OMAP24XX_GPIO_FALLINGDETECT); __raw_writel(l2, bank->base + OMAP24XX_GPIO_RISINGDETECT); +#endif c++; } if (!c) { @@ -1513,26 +1605,31 @@ void omap2_gpio_resume_after_retention(void) if (!(bank->enabled_non_wakeup_gpios)) continue; +#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) __raw_writel(bank->saved_fallingdetect, bank->base + OMAP24XX_GPIO_FALLINGDETECT); __raw_writel(bank->saved_risingdetect, bank->base + OMAP24XX_GPIO_RISINGDETECT); +#endif /* Check if any of the non-wakeup interrupt GPIOs have changed * state. If so, generate an IRQ by software. This is * horribly racy, but it's the best we can do to work around * this silicon bug. */ +#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) l = __raw_readl(bank->base + OMAP24XX_GPIO_DATAIN); +#endif l ^= bank->saved_datain; l &= bank->non_wakeup_gpios; if (l) { u32 old0, old1; - +#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) old0 = __raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT0); old1 = __raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT1); __raw_writel(old0 | l, bank->base + OMAP24XX_GPIO_LEVELDETECT0); __raw_writel(old1 | l, bank->base + OMAP24XX_GPIO_LEVELDETECT1); __raw_writel(old0, bank->base + OMAP24XX_GPIO_LEVELDETECT0); __raw_writel(old1, bank->base + OMAP24XX_GPIO_LEVELDETECT1); +#endif } } @@ -1561,8 +1658,8 @@ static int __init omap_gpio_sysinit(void) mpuio_init(); -#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP24XX) - if (cpu_is_omap16xx() || cpu_is_omap24xx()) { +#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) + if (cpu_is_omap16xx() || cpu_class_is_omap2()) { if (ret == 0) { ret = sysdev_class_register(&omap_gpio_sysclass); if (ret == 0) @@ -1624,7 +1721,7 @@ static int dbg_gpio_show(struct seq_file *s, void *unused) if (bank_is_mpuio(bank)) gpio = OMAP_MPUIO(0); - else if (cpu_is_omap24xx() || cpu_is_omap730()) + else if (cpu_class_is_omap2() || cpu_is_omap730()) bankwidth = 32; for (j = 0; j < bankwidth; j++, gpio++, mask <<= 1) { diff --git a/include/asm-arm/arch-omap/gpio.h b/include/asm-arm/arch-omap/gpio.h index 97b397dd7e8..c782ef9a2ac 100644 --- a/include/asm-arm/arch-omap/gpio.h +++ b/include/asm-arm/arch-omap/gpio.h @@ -62,6 +62,8 @@ #define OMAP_MPUIO_LATCH 0x34 #endif +#define OMAP34XX_NR_GPIOS 6 + #define OMAP_MPUIO(nr) (OMAP_MAX_GPIO_LINES + (nr)) #define OMAP_GPIO_IS_MPUIO(nr) ((nr) >= OMAP_MAX_GPIO_LINES) -- cgit v1.2.3-70-g09d2 From d11ac9791b87efb24506b6391a965b789385157c Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Sat, 12 Jan 2008 15:35:04 -0800 Subject: ARM: OMAP: Get rid of unnecessary ifdefs in GPIO code Just use cpu_is_omapXXXX() instead. This does not increase object size. Signed-off-by: Tony Lindgren --- arch/arm/plat-omap/gpio.c | 47 ++++++----------------------------------------- 1 file changed, 6 insertions(+), 41 deletions(-) (limited to 'arch') diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c index 7dd50a43fbc..c233ebd7639 100644 --- a/arch/arm/plat-omap/gpio.c +++ b/arch/arm/plat-omap/gpio.c @@ -221,51 +221,35 @@ static int gpio_bank_count; static inline struct gpio_bank *get_gpio_bank(int gpio) { -#ifdef CONFIG_ARCH_OMAP15XX if (cpu_is_omap15xx()) { if (OMAP_GPIO_IS_MPUIO(gpio)) return &gpio_bank[0]; return &gpio_bank[1]; } -#endif -#if defined(CONFIG_ARCH_OMAP16XX) if (cpu_is_omap16xx()) { if (OMAP_GPIO_IS_MPUIO(gpio)) return &gpio_bank[0]; return &gpio_bank[1 + (gpio >> 4)]; } -#endif -#ifdef CONFIG_ARCH_OMAP730 if (cpu_is_omap730()) { if (OMAP_GPIO_IS_MPUIO(gpio)) return &gpio_bank[0]; return &gpio_bank[1 + (gpio >> 5)]; } -#endif -#ifdef CONFIG_ARCH_OMAP24XX if (cpu_is_omap24xx()) return &gpio_bank[gpio >> 5]; -#endif -#ifdef CONFIG_ARCH_OMAP34XX if (cpu_is_omap34xx()) return &gpio_bank[gpio >> 5]; -#endif } static inline int get_gpio_index(int gpio) { -#ifdef CONFIG_ARCH_OMAP730 if (cpu_is_omap730()) return gpio & 0x1f; -#endif -#ifdef CONFIG_ARCH_OMAP24XX if (cpu_is_omap24xx()) return gpio & 0x1f; -#endif -#ifdef CONFIG_ARCH_OMAP34XX if (cpu_is_omap34xx()) return gpio & 0x1f; -#endif return gpio & 0x0f; } @@ -273,33 +257,21 @@ static inline int gpio_valid(int gpio) { if (gpio < 0) return -1; -#ifndef CONFIG_ARCH_OMAP24XX - if (OMAP_GPIO_IS_MPUIO(gpio)) { + if (cpu_class_is_omap1() && OMAP_GPIO_IS_MPUIO(gpio)) { if (gpio >= OMAP_MAX_GPIO_LINES + 16) return -1; return 0; } -#endif -#ifdef CONFIG_ARCH_OMAP15XX if (cpu_is_omap15xx() && gpio < 16) return 0; -#endif -#if defined(CONFIG_ARCH_OMAP16XX) if ((cpu_is_omap16xx()) && gpio < 64) return 0; -#endif -#ifdef CONFIG_ARCH_OMAP730 if (cpu_is_omap730() && gpio < 192) return 0; -#endif -#ifdef CONFIG_ARCH_OMAP24XX if (cpu_is_omap24xx() && gpio < 128) return 0; -#endif -#ifdef CONFIG_ARCH_OMAP34XX if (cpu_is_omap34xx() && gpio < 160) return 0; -#endif return -1; } @@ -1393,27 +1365,22 @@ static int __init _omap_gpio_init(void) spin_lock_init(&bank->lock); if (bank_is_mpuio(bank)) omap_writew(0xFFFF, OMAP_MPUIO_BASE + OMAP_MPUIO_GPIO_MASKIT); -#ifdef CONFIG_ARCH_OMAP15XX - if (bank->method == METHOD_GPIO_1510) { + if (cpu_is_omap15xx() && bank->method == METHOD_GPIO_1510) { __raw_writew(0xffff, bank->base + OMAP1510_GPIO_INT_MASK); __raw_writew(0x0000, bank->base + OMAP1510_GPIO_INT_STATUS); } -#endif -#if defined(CONFIG_ARCH_OMAP16XX) - if (bank->method == METHOD_GPIO_1610) { + if (cpu_is_omap16xx() && bank->method == METHOD_GPIO_1610) { __raw_writew(0x0000, bank->base + OMAP1610_GPIO_IRQENABLE1); __raw_writew(0xffff, bank->base + OMAP1610_GPIO_IRQSTATUS1); __raw_writew(0x0014, bank->base + OMAP1610_GPIO_SYSCONFIG); } -#endif -#ifdef CONFIG_ARCH_OMAP730 - if (bank->method == METHOD_GPIO_730) { + if (cpu_is_omap730() && bank->method == METHOD_GPIO_730) { __raw_writel(0xffffffff, bank->base + OMAP730_GPIO_INT_MASK); __raw_writel(0x00000000, bank->base + OMAP730_GPIO_INT_STATUS); gpio_count = 32; /* 730 has 32-bit GPIOs */ } -#endif + #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) if (bank->method == METHOD_GPIO_24XX) { static const u32 non_wakeup_gpios[] = { @@ -1450,14 +1417,12 @@ static int __init _omap_gpio_init(void) if (cpu_is_omap16xx()) omap_writel(omap_readl(ULPD_CAM_CLK_CTRL) | 0x04, ULPD_CAM_CLK_CTRL); -#if defined(CONFIG_ARCH_OMAP24XX) /* Enable autoidle for the OCP interface */ if (cpu_is_omap24xx()) omap_writel(1 << 0, 0x48019010); -#elif defined(CONFIG_ARCH_OMAP34XX) if (cpu_is_omap34xx()) omap_writel(1 << 0, 0x48306814); -#endif + return 0; } -- cgit v1.2.3-70-g09d2 From 5eb3bb9c0d123ad84ed5127fbc62731896d87181 Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Sat, 5 May 2007 11:40:29 -0700 Subject: ARM: OMAP: Add 24xx GPIO debounce support Add 24xx GPIO debounce support. Also minor formatting clean-up. Signed-off-by: Kevin Hilman Signed-off-by: Tony Lindgren --- arch/arm/plat-omap/gpio.c | 60 ++++++++++++++++++++++++++++++++++++---- include/asm-arm/arch-omap/gpio.h | 2 ++ 2 files changed, 57 insertions(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c index c233ebd7639..56f4d1394d5 100644 --- a/arch/arm/plat-omap/gpio.c +++ b/arch/arm/plat-omap/gpio.c @@ -110,6 +110,8 @@ #define OMAP24XX_GPIO_LEVELDETECT1 0x0044 #define OMAP24XX_GPIO_RISINGDETECT 0x0048 #define OMAP24XX_GPIO_FALLINGDETECT 0x004c +#define OMAP24XX_GPIO_DEBOUNCE_EN 0x0050 +#define OMAP24XX_GPIO_DEBOUNCE_VAL 0x0054 #define OMAP24XX_GPIO_CLEARIRQENABLE1 0x0060 #define OMAP24XX_GPIO_SETIRQENABLE1 0x0064 #define OMAP24XX_GPIO_CLEARWKUENA 0x0080 @@ -463,8 +465,50 @@ do { \ __raw_writel(l, base + reg); \ } while(0) +void omap_set_gpio_debounce(int gpio, int enable) +{ + struct gpio_bank *bank; + void __iomem *reg; + u32 val, l = 1 << get_gpio_index(gpio); + + if (cpu_class_is_omap1()) + return; + + bank = get_gpio_bank(gpio); + reg = bank->base; + + reg += OMAP24XX_GPIO_DEBOUNCE_EN; + val = __raw_readl(reg); + + if (enable) + val |= l; + else + val &= ~l; + + __raw_writel(val, reg); +} +EXPORT_SYMBOL(omap_set_gpio_debounce); + +void omap_set_gpio_debounce_time(int gpio, int enc_time) +{ + struct gpio_bank *bank; + void __iomem *reg; + + if (cpu_class_is_omap1()) + return; + + bank = get_gpio_bank(gpio); + reg = bank->base; + + enc_time &= 0xff; + reg += OMAP24XX_GPIO_DEBOUNCE_VAL; + __raw_writel(enc_time, reg); +} +EXPORT_SYMBOL(omap_set_gpio_debounce_time); + #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) -static inline void set_24xx_gpio_triggering(struct gpio_bank *bank, int gpio, int trigger) +static inline void set_24xx_gpio_triggering(struct gpio_bank *bank, int gpio, + int trigger) { void __iomem *base = bank->base; u32 gpio_bit = 1 << gpio; @@ -477,19 +521,25 @@ static inline void set_24xx_gpio_triggering(struct gpio_bank *bank, int gpio, in trigger & __IRQT_RISEDGE); MOD_REG_BIT(OMAP24XX_GPIO_FALLINGDETECT, gpio_bit, trigger & __IRQT_FALEDGE); + if (likely(!(bank->non_wakeup_gpios & gpio_bit))) { if (trigger != 0) - __raw_writel(1 << gpio, bank->base + OMAP24XX_GPIO_SETWKUENA); + __raw_writel(1 << gpio, bank->base + + OMAP24XX_GPIO_SETWKUENA); else - __raw_writel(1 << gpio, bank->base + OMAP24XX_GPIO_CLEARWKUENA); + __raw_writel(1 << gpio, bank->base + + OMAP24XX_GPIO_CLEARWKUENA); } else { if (trigger != 0) bank->enabled_non_wakeup_gpios |= gpio_bit; else bank->enabled_non_wakeup_gpios &= ~gpio_bit; } - /* FIXME: Possibly do 'set_irq_handler(j, handle_level_irq)' if only level - * triggering requested. */ + + /* + * FIXME: Possibly do 'set_irq_handler(j, handle_level_irq)' if only + * level triggering requested. + */ } #endif diff --git a/include/asm-arm/arch-omap/gpio.h b/include/asm-arm/arch-omap/gpio.h index c782ef9a2ac..164da09be09 100644 --- a/include/asm-arm/arch-omap/gpio.h +++ b/include/asm-arm/arch-omap/gpio.h @@ -77,6 +77,8 @@ extern void omap_free_gpio(int gpio); extern void omap_set_gpio_direction(int gpio, int is_input); extern void omap_set_gpio_dataout(int gpio, int enable); extern int omap_get_gpio_datain(int gpio); +extern void omap_set_gpio_debounce(int gpio, int enable); +extern void omap_set_gpio_debounce_time(int gpio, int enable); /*-------------------------------------------------------------------------*/ -- cgit v1.2.3-70-g09d2 From f8151e5c327bfc41f0993a45fb61ea121bebfee4 Mon Sep 17 00:00:00 2001 From: Anand Gadiyar Date: Sat, 1 Dec 2007 12:14:11 -0800 Subject: ARM: OMAP: Add DMA support for chaining and 3430 Add DMA support for chaining and 3430. Also remove old DEBUG_PRINTS as noted by Russell King. Signed-off-by: Anand Gadiyar Signed-off-by: Tony Lindgren --- arch/arm/plat-omap/dma.c | 844 ++++++++++++++++++++++++++++++++++++++-- include/asm-arm/arch-omap/dma.h | 135 +++++-- 2 files changed, 905 insertions(+), 74 deletions(-) (limited to 'arch') diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c index dcbba07cf98..a46676db811 100644 --- a/arch/arm/plat-omap/dma.c +++ b/arch/arm/plat-omap/dma.c @@ -6,7 +6,7 @@ * DMA channel linking for 1610 by Samuel Ortiz * Graphics DMA and LCD DMA graphics tranformations * by Imre Deak - * OMAP2 support Copyright (C) 2004-2005 Texas Instruments, Inc. + * OMAP2/3 support Copyright (C) 2004-2007 Texas Instruments, Inc. * Merged to support both OMAP1 and OMAP2 by Tony Lindgren * Some functions based on earlier dma-omap.c Copyright (C) 2001 RidgeRun, Inc. * @@ -33,12 +33,14 @@ #include -#define DEBUG_PRINTS -#undef DEBUG_PRINTS -#ifdef DEBUG_PRINTS -#define debug_printk(x) printk x -#else -#define debug_printk(x) +#undef DEBUG + +#ifndef CONFIG_ARCH_OMAP1 +enum { DMA_CH_ALLOC_DONE, DMA_CH_PARAMS_SET_DONE, DMA_CH_STARTED, + DMA_CH_QUEUED, DMA_CH_NOTSTARTED, DMA_CH_PAUSED, DMA_CH_LINK_ENABLED +}; + +enum { DMA_CHAIN_STARTED, DMA_CHAIN_NOTSTARTED }; #endif #define OMAP_DMA_ACTIVE 0x01 @@ -57,9 +59,66 @@ struct omap_dma_lch { const char *dev_name; void (* callback)(int lch, u16 ch_status, void *data); void *data; + +#ifndef CONFIG_ARCH_OMAP1 + /* required for Dynamic chaining */ + int prev_linked_ch; + int next_linked_ch; + int state; + int chain_id; + + int status; +#endif long flags; }; +#ifndef CONFIG_ARCH_OMAP1 +struct dma_link_info { + int *linked_dmach_q; + int no_of_lchs_linked; + + int q_count; + int q_tail; + int q_head; + + int chain_state; + int chain_mode; + +}; + +static struct dma_link_info dma_linked_lch[OMAP_LOGICAL_DMA_CH_COUNT]; + +/* Chain handling macros */ +#define OMAP_DMA_CHAIN_QINIT(chain_id) \ + do { \ + dma_linked_lch[chain_id].q_head = \ + dma_linked_lch[chain_id].q_tail = \ + dma_linked_lch[chain_id].q_count = 0; \ + } while (0) +#define OMAP_DMA_CHAIN_QFULL(chain_id) \ + (dma_linked_lch[chain_id].no_of_lchs_linked == \ + dma_linked_lch[chain_id].q_count) +#define OMAP_DMA_CHAIN_QLAST(chain_id) \ + do { \ + ((dma_linked_lch[chain_id].no_of_lchs_linked-1) == \ + dma_linked_lch[chain_id].q_count) \ + } while (0) +#define OMAP_DMA_CHAIN_QEMPTY(chain_id) \ + (0 == dma_linked_lch[chain_id].q_count) +#define __OMAP_DMA_CHAIN_INCQ(end) \ + ((end) = ((end)+1) % dma_linked_lch[chain_id].no_of_lchs_linked) +#define OMAP_DMA_CHAIN_INCQHEAD(chain_id) \ + do { \ + __OMAP_DMA_CHAIN_INCQ(dma_linked_lch[chain_id].q_head); \ + dma_linked_lch[chain_id].q_count--; \ + } while (0) + +#define OMAP_DMA_CHAIN_INCQTAIL(chain_id) \ + do { \ + __OMAP_DMA_CHAIN_INCQ(dma_linked_lch[chain_id].q_tail); \ + dma_linked_lch[chain_id].q_count++; \ + } while (0) +#endif static int dma_chan_count; static spinlock_t dma_chan_lock; @@ -73,6 +132,10 @@ static const u8 omap1_dma_irq[OMAP_LOGICAL_DMA_CH_COUNT] = { INT_1610_DMA_CH14, INT_1610_DMA_CH15, INT_DMA_LCD }; +static inline void disable_lnk(int lch); +static void omap_disable_channel_irq(int lch); +static inline void omap_enable_channel_irq(int lch); + #define REVISIT_24XX() printk(KERN_ERR "FIXME: no %s on 24xx\n", \ __FUNCTION__); @@ -148,7 +211,7 @@ void omap_set_dma_priority(int lch, int dst_port, int priority) omap_writel(l, reg); } - if (cpu_is_omap24xx()) { + if (cpu_class_is_omap2()) { if (priority) OMAP_DMA_CCR_REG(lch) |= (1 << 6); else @@ -173,7 +236,7 @@ void omap_set_dma_transfer_params(int lch, int data_type, int elem_count, OMAP1_DMA_CCR2_REG(lch) |= 1 << 2; } - if (cpu_is_omap24xx() && dma_trigger) { + if (cpu_class_is_omap2() && dma_trigger) { u32 val = OMAP_DMA_CCR_REG(lch); val &= ~(3 << 19); @@ -213,7 +276,7 @@ void omap_set_dma_color_mode(int lch, enum omap_dma_color_mode mode, u32 color) BUG_ON(omap_dma_in_1510_mode()); - if (cpu_is_omap24xx()) { + if (cpu_class_is_omap2()) { REVISIT_24XX(); return; } @@ -245,7 +308,7 @@ void omap_set_dma_color_mode(int lch, enum omap_dma_color_mode mode, u32 color) void omap_set_dma_write_mode(int lch, enum omap_dma_write_mode mode) { - if (cpu_is_omap24xx()) { + if (cpu_class_is_omap2()) { OMAP_DMA_CSDP_REG(lch) &= ~(0x3 << 16); OMAP_DMA_CSDP_REG(lch) |= (mode << 16); } @@ -269,7 +332,7 @@ void omap_set_dma_src_params(int lch, int src_port, int src_amode, OMAP1_DMA_CSSA_L_REG(lch) = src_start; } - if (cpu_is_omap24xx()) + if (cpu_class_is_omap2()) OMAP2_DMA_CSSA_REG(lch) = src_start; OMAP_DMA_CSEI_REG(lch) = src_ei; @@ -289,11 +352,14 @@ void omap_set_dma_params(int lch, struct omap_dma_channel_params * params) omap_set_dma_dest_params(lch, params->dst_port, params->dst_amode, params->dst_start, params->dst_ei, params->dst_fi); + if (params->read_prio || params->write_prio) + omap_dma_set_prio_lch(lch, params->read_prio, + params->write_prio); } void omap_set_dma_src_index(int lch, int eidx, int fidx) { - if (cpu_is_omap24xx()) { + if (cpu_class_is_omap2()) { REVISIT_24XX(); return; } @@ -317,13 +383,13 @@ void omap_set_dma_src_burst_mode(int lch, enum omap_dma_burst_mode burst_mode) case OMAP_DMA_DATA_BURST_DIS: break; case OMAP_DMA_DATA_BURST_4: - if (cpu_is_omap24xx()) + if (cpu_class_is_omap2()) burst = 0x1; else burst = 0x2; break; case OMAP_DMA_DATA_BURST_8: - if (cpu_is_omap24xx()) { + if (cpu_class_is_omap2()) { burst = 0x2; break; } @@ -332,7 +398,7 @@ void omap_set_dma_src_burst_mode(int lch, enum omap_dma_burst_mode burst_mode) * fall through */ case OMAP_DMA_DATA_BURST_16: - if (cpu_is_omap24xx()) { + if (cpu_class_is_omap2()) { burst = 0x3; break; } @@ -363,7 +429,7 @@ void omap_set_dma_dest_params(int lch, int dest_port, int dest_amode, OMAP1_DMA_CDSA_L_REG(lch) = dest_start; } - if (cpu_is_omap24xx()) + if (cpu_class_is_omap2()) OMAP2_DMA_CDSA_REG(lch) = dest_start; OMAP_DMA_CDEI_REG(lch) = dst_ei; @@ -372,7 +438,7 @@ void omap_set_dma_dest_params(int lch, int dest_port, int dest_amode, void omap_set_dma_dest_index(int lch, int eidx, int fidx) { - if (cpu_is_omap24xx()) { + if (cpu_class_is_omap2()) { REVISIT_24XX(); return; } @@ -396,19 +462,19 @@ void omap_set_dma_dest_burst_mode(int lch, enum omap_dma_burst_mode burst_mode) case OMAP_DMA_DATA_BURST_DIS: break; case OMAP_DMA_DATA_BURST_4: - if (cpu_is_omap24xx()) + if (cpu_class_is_omap2()) burst = 0x1; else burst = 0x2; break; case OMAP_DMA_DATA_BURST_8: - if (cpu_is_omap24xx()) + if (cpu_class_is_omap2()) burst = 0x2; else burst = 0x3; break; case OMAP_DMA_DATA_BURST_16: - if (cpu_is_omap24xx()) { + if (cpu_class_is_omap2()) { burst = 0x3; break; } @@ -430,7 +496,7 @@ static inline void omap_enable_channel_irq(int lch) /* Clear CSR */ if (cpu_class_is_omap1()) status = OMAP_DMA_CSR_REG(lch); - else if (cpu_is_omap24xx()) + else if (cpu_class_is_omap2()) OMAP_DMA_CSR_REG(lch) = OMAP2_DMA_CSR_CLEAR_MASK; /* Enable some nice interrupts. */ @@ -441,7 +507,7 @@ static inline void omap_enable_channel_irq(int lch) static void omap_disable_channel_irq(int lch) { - if (cpu_is_omap24xx()) + if (cpu_class_is_omap2()) OMAP_DMA_CICR_REG(lch) = 0; } @@ -464,6 +530,12 @@ static inline void enable_lnk(int lch) if (dma_chan[lch].next_lch != -1) OMAP_DMA_CLNK_CTRL_REG(lch) = dma_chan[lch].next_lch | (1 << 15); + +#ifndef CONFIG_ARCH_OMAP1 + if (dma_chan[lch].next_linked_ch != -1) + OMAP_DMA_CLNK_CTRL_REG(lch) = + dma_chan[lch].next_linked_ch | (1 << 15); +#endif } static inline void disable_lnk(int lch) @@ -475,7 +547,7 @@ static inline void disable_lnk(int lch) OMAP_DMA_CLNK_CTRL_REG(lch) |= 1 << 14; } - if (cpu_is_omap24xx()) { + if (cpu_class_is_omap2()) { omap_disable_channel_irq(lch); /* Clear the ENABLE_LNK bit */ OMAP_DMA_CLNK_CTRL_REG(lch) &= ~(1 << 15); @@ -488,7 +560,7 @@ static inline void omap2_enable_irq_lch(int lch) { u32 val; - if (!cpu_is_omap24xx()) + if (!cpu_class_is_omap2()) return; val = omap_readl(OMAP_DMA4_IRQENABLE_L0); @@ -522,7 +594,7 @@ int omap_request_dma(int dev_id, const char *dev_name, if (cpu_class_is_omap1()) clear_lch_regs(free_ch); - if (cpu_is_omap24xx()) + if (cpu_class_is_omap2()) omap_clear_dma(free_ch); spin_unlock_irqrestore(&dma_chan_lock, flags); @@ -530,11 +602,14 @@ int omap_request_dma(int dev_id, const char *dev_name, chan->dev_name = dev_name; chan->callback = callback; chan->data = data; +#ifndef CONFIG_ARCH_OMAP1 + chan->chain_id = -1; +#endif chan->enabled_irqs = OMAP_DMA_DROP_IRQ | OMAP_DMA_BLOCK_IRQ; if (cpu_class_is_omap1()) chan->enabled_irqs |= OMAP1_DMA_TOUT_IRQ; - else if (cpu_is_omap24xx()) + else if (cpu_class_is_omap2()) chan->enabled_irqs |= OMAP2_DMA_MISALIGNED_ERR_IRQ | OMAP2_DMA_TRANS_ERR_IRQ; @@ -551,7 +626,7 @@ int omap_request_dma(int dev_id, const char *dev_name, OMAP_DMA_CCR_REG(free_ch) = dev_id; } - if (cpu_is_omap24xx()) { + if (cpu_class_is_omap2()) { omap2_enable_irq_lch(free_ch); omap_enable_channel_irq(free_ch); @@ -588,7 +663,7 @@ void omap_free_dma(int lch) OMAP_DMA_CCR_REG(lch) = 0; } - if (cpu_is_omap24xx()) { + if (cpu_class_is_omap2()) { u32 val; /* Disable interrupts */ val = omap_readl(OMAP_DMA4_IRQENABLE_L0); @@ -608,6 +683,67 @@ void omap_free_dma(int lch) } } +/** + * @brief omap_dma_set_global_params : Set global priority settings for dma + * + * @param arb_rate + * @param max_fifo_depth + * @param tparams - Number of thereads to reserve : DMA_THREAD_RESERVE_NORM + * DMA_THREAD_RESERVE_ONET + * DMA_THREAD_RESERVE_TWOT + * DMA_THREAD_RESERVE_THREET + */ +void +omap_dma_set_global_params(int arb_rate, int max_fifo_depth, int tparams) +{ + u32 reg; + + if (!cpu_class_is_omap2()) { + printk(KERN_ERR "FIXME: no %s on 15xx/16xx\n", __FUNCTION__); + return; + } + + if (arb_rate == 0) + arb_rate = 1; + + reg = (arb_rate & 0xff) << 16; + reg |= (0xff & max_fifo_depth); + + omap_writel(reg, OMAP_DMA4_GCR_REG); +} +EXPORT_SYMBOL(omap_dma_set_global_params); + +/** + * @brief omap_dma_set_prio_lch : Set channel wise priority settings + * + * @param lch + * @param read_prio - Read priority + * @param write_prio - Write priority + * Both of the above can be set with one of the following values : + * DMA_CH_PRIO_HIGH/DMA_CH_PRIO_LOW + */ +int +omap_dma_set_prio_lch(int lch, unsigned char read_prio, + unsigned char write_prio) +{ + u32 w; + + if (unlikely((lch < 0 || lch >= OMAP_LOGICAL_DMA_CH_COUNT))) { + printk(KERN_ERR "Invalid channel id\n"); + return -EINVAL; + } + w = OMAP_DMA_CCR_REG(lch); + w &= ~((1 << 6) | (1 << 26)); + if (cpu_is_omap2430() || cpu_is_omap34xx()) + w |= ((read_prio & 0x1) << 6) | ((write_prio & 0x1) << 26); + else + w |= ((read_prio & 0x1) << 6); + + OMAP_DMA_CCR_REG(lch) = w; + return 0; +} +EXPORT_SYMBOL(omap_dma_set_prio_lch); + /* * Clears any DMA state so the DMA engine is ready to restart with new buffers * through omap_start_dma(). Any buffers in flight are discarded. @@ -626,9 +762,9 @@ void omap_clear_dma(int lch) status = OMAP_DMA_CSR_REG(lch); } - if (cpu_is_omap24xx()) { + if (cpu_class_is_omap2()) { int i; - u32 lch_base = OMAP24XX_DMA_BASE + lch * 0x60 + 0x80; + u32 lch_base = OMAP_DMA4_BASE + lch * 0x60 + 0x80; for (i = 0; i < 0x44; i += 4) omap_writel(0, lch_base + i); } @@ -662,7 +798,7 @@ void omap_start_dma(int lch) cur_lch = next_lch; } while (next_lch != -1); - } else if (cpu_is_omap24xx()) { + } else if (cpu_class_is_omap2()) { /* Errata: Need to write lch even if not using chaining */ OMAP_DMA_CLNK_CTRL_REG(lch) = lch; } @@ -753,7 +889,7 @@ dma_addr_t omap_get_dma_src_pos(int lch) offset = (dma_addr_t) (OMAP1_DMA_CSSA_L_REG(lch) | (OMAP1_DMA_CSSA_U_REG(lch) << 16)); - if (cpu_is_omap24xx()) + if (cpu_class_is_omap2()) offset = OMAP_DMA_CSAC_REG(lch); return offset; @@ -775,8 +911,8 @@ dma_addr_t omap_get_dma_dst_pos(int lch) offset = (dma_addr_t) (OMAP1_DMA_CDSA_L_REG(lch) | (OMAP1_DMA_CDSA_U_REG(lch) << 16)); - if (cpu_is_omap24xx()) - offset = OMAP2_DMA_CDSA_REG(lch); + if (cpu_class_is_omap2()) + offset = OMAP_DMA_CDAC_REG(lch); return offset; } @@ -859,6 +995,605 @@ void omap_dma_unlink_lch (int lch_head, int lch_queue) dma_chan[lch_head].next_lch = -1; } +#ifndef CONFIG_ARCH_OMAP1 +/* Create chain of DMA channesls */ +static void create_dma_lch_chain(int lch_head, int lch_queue) +{ + u32 w; + + /* Check if this is the first link in chain */ + if (dma_chan[lch_head].next_linked_ch == -1) { + dma_chan[lch_head].next_linked_ch = lch_queue; + dma_chan[lch_head].prev_linked_ch = lch_queue; + dma_chan[lch_queue].next_linked_ch = lch_head; + dma_chan[lch_queue].prev_linked_ch = lch_head; + } + + /* a link exists, link the new channel in circular chain */ + else { + dma_chan[lch_queue].next_linked_ch = + dma_chan[lch_head].next_linked_ch; + dma_chan[lch_queue].prev_linked_ch = lch_head; + dma_chan[lch_head].next_linked_ch = lch_queue; + dma_chan[dma_chan[lch_queue].next_linked_ch].prev_linked_ch = + lch_queue; + } + + w = OMAP_DMA_CLNK_CTRL_REG(lch_head); + w &= ~(0x0f); + w |= lch_queue; + OMAP_DMA_CLNK_CTRL_REG(lch_head) = w; + + w = OMAP_DMA_CLNK_CTRL_REG(lch_queue); + w &= ~(0x0f); + w |= (dma_chan[lch_queue].next_linked_ch); + OMAP_DMA_CLNK_CTRL_REG(lch_queue) = w; +} + +/** + * @brief omap_request_dma_chain : Request a chain of DMA channels + * + * @param dev_id - Device id using the dma channel + * @param dev_name - Device name + * @param callback - Call back function + * @chain_id - + * @no_of_chans - Number of channels requested + * @chain_mode - Dynamic or static chaining : OMAP_DMA_STATIC_CHAIN + * OMAP_DMA_DYNAMIC_CHAIN + * @params - Channel parameters + * + * @return - Succes : 0 + * Failure: -EINVAL/-ENOMEM + */ +int omap_request_dma_chain(int dev_id, const char *dev_name, + void (*callback) (int chain_id, u16 ch_status, + void *data), + int *chain_id, int no_of_chans, int chain_mode, + struct omap_dma_channel_params params) +{ + int *channels; + int i, err; + + /* Is the chain mode valid ? */ + if (chain_mode != OMAP_DMA_STATIC_CHAIN + && chain_mode != OMAP_DMA_DYNAMIC_CHAIN) { + printk(KERN_ERR "Invalid chain mode requested\n"); + return -EINVAL; + } + + if (unlikely((no_of_chans < 1 + || no_of_chans > OMAP_LOGICAL_DMA_CH_COUNT))) { + printk(KERN_ERR "Invalid Number of channels requested\n"); + return -EINVAL; + } + + /* Allocate a queue to maintain the status of the channels + * in the chain */ + channels = kmalloc(sizeof(*channels) * no_of_chans, GFP_KERNEL); + if (channels == NULL) { + printk(KERN_ERR "omap_dma: No memory for channel queue\n"); + return -ENOMEM; + } + + /* request and reserve DMA channels for the chain */ + for (i = 0; i < no_of_chans; i++) { + err = omap_request_dma(dev_id, dev_name, + callback, 0, &channels[i]); + if (err < 0) { + int j; + for (j = 0; j < i; j++) + omap_free_dma(channels[j]); + kfree(channels); + printk(KERN_ERR "omap_dma: Request failed %d\n", err); + return err; + } + dma_chan[channels[i]].next_linked_ch = -1; + dma_chan[channels[i]].prev_linked_ch = -1; + dma_chan[channels[i]].state = DMA_CH_NOTSTARTED; + + /* + * Allowing client drivers to set common parameters now, + * so that later only relevant (src_start, dest_start + * and element count) can be set + */ + omap_set_dma_params(channels[i], ¶ms); + } + + *chain_id = channels[0]; + dma_linked_lch[*chain_id].linked_dmach_q = channels; + dma_linked_lch[*chain_id].chain_mode = chain_mode; + dma_linked_lch[*chain_id].chain_state = DMA_CHAIN_NOTSTARTED; + dma_linked_lch[*chain_id].no_of_lchs_linked = no_of_chans; + + for (i = 0; i < no_of_chans; i++) + dma_chan[channels[i]].chain_id = *chain_id; + + /* Reset the Queue pointers */ + OMAP_DMA_CHAIN_QINIT(*chain_id); + + /* Set up the chain */ + if (no_of_chans == 1) + create_dma_lch_chain(channels[0], channels[0]); + else { + for (i = 0; i < (no_of_chans - 1); i++) + create_dma_lch_chain(channels[i], channels[i + 1]); + } + return 0; +} +EXPORT_SYMBOL(omap_request_dma_chain); + +/** + * @brief omap_modify_dma_chain_param : Modify the chain's params - Modify the + * params after setting it. Dont do this while dma is running!! + * + * @param chain_id - Chained logical channel id. + * @param params + * + * @return - Success : 0 + * Failure : -EINVAL + */ +int omap_modify_dma_chain_params(int chain_id, + struct omap_dma_channel_params params) +{ + int *channels; + u32 i; + + /* Check for input params */ + if (unlikely((chain_id < 0 + || chain_id >= OMAP_LOGICAL_DMA_CH_COUNT))) { + printk(KERN_ERR "Invalid chain id\n"); + return -EINVAL; + } + + /* Check if the chain exists */ + if (dma_linked_lch[chain_id].linked_dmach_q == NULL) { + printk(KERN_ERR "Chain doesn't exists\n"); + return -EINVAL; + } + channels = dma_linked_lch[chain_id].linked_dmach_q; + + for (i = 0; i < dma_linked_lch[chain_id].no_of_lchs_linked; i++) { + /* + * Allowing client drivers to set common parameters now, + * so that later only relevant (src_start, dest_start + * and element count) can be set + */ + omap_set_dma_params(channels[i], ¶ms); + } + return 0; +} +EXPORT_SYMBOL(omap_modify_dma_chain_params); + +/** + * @brief omap_free_dma_chain - Free all the logical channels in a chain. + * + * @param chain_id + * + * @return - Success : 0 + * Failure : -EINVAL + */ +int omap_free_dma_chain(int chain_id) +{ + int *channels; + u32 i; + + /* Check for input params */ + if (unlikely((chain_id < 0 || chain_id >= OMAP_LOGICAL_DMA_CH_COUNT))) { + printk(KERN_ERR "Invalid chain id\n"); + return -EINVAL; + } + + /* Check if the chain exists */ + if (dma_linked_lch[chain_id].linked_dmach_q == NULL) { + printk(KERN_ERR "Chain doesn't exists\n"); + return -EINVAL; + } + + channels = dma_linked_lch[chain_id].linked_dmach_q; + for (i = 0; i < dma_linked_lch[chain_id].no_of_lchs_linked; i++) { + dma_chan[channels[i]].next_linked_ch = -1; + dma_chan[channels[i]].prev_linked_ch = -1; + dma_chan[channels[i]].chain_id = -1; + dma_chan[channels[i]].state = DMA_CH_NOTSTARTED; + omap_free_dma(channels[i]); + } + + kfree(channels); + + dma_linked_lch[chain_id].linked_dmach_q = NULL; + dma_linked_lch[chain_id].chain_mode = -1; + dma_linked_lch[chain_id].chain_state = -1; + return (0); +} +EXPORT_SYMBOL(omap_free_dma_chain); + +/** + * @brief omap_dma_chain_status - Check if the chain is in + * active / inactive state. + * @param chain_id + * + * @return - Success : OMAP_DMA_CHAIN_ACTIVE/OMAP_DMA_CHAIN_INACTIVE + * Failure : -EINVAL + */ +int omap_dma_chain_status(int chain_id) +{ + /* Check for input params */ + if (unlikely((chain_id < 0 || chain_id >= OMAP_LOGICAL_DMA_CH_COUNT))) { + printk(KERN_ERR "Invalid chain id\n"); + return -EINVAL; + } + + /* Check if the chain exists */ + if (dma_linked_lch[chain_id].linked_dmach_q == NULL) { + printk(KERN_ERR "Chain doesn't exists\n"); + return -EINVAL; + } + pr_debug("CHAINID=%d, qcnt=%d\n", chain_id, + dma_linked_lch[chain_id].q_count); + + if (OMAP_DMA_CHAIN_QEMPTY(chain_id)) + return OMAP_DMA_CHAIN_INACTIVE; + return OMAP_DMA_CHAIN_ACTIVE; +} +EXPORT_SYMBOL(omap_dma_chain_status); + +/** + * @brief omap_dma_chain_a_transfer - Get a free channel from a chain, + * set the params and start the transfer. + * + * @param chain_id + * @param src_start - buffer start address + * @param dest_start - Dest address + * @param elem_count + * @param frame_count + * @param callbk_data - channel callback parameter data. + * + * @return - Success : start_dma status + * Failure: -EINVAL/-EBUSY + */ +int omap_dma_chain_a_transfer(int chain_id, int src_start, int dest_start, + int elem_count, int frame_count, void *callbk_data) +{ + int *channels; + u32 w, lch; + int start_dma = 0; + + /* if buffer size is less than 1 then there is + * no use of starting the chain */ + if (elem_count < 1) { + printk(KERN_ERR "Invalid buffer size\n"); + return -EINVAL; + } + + /* Check for input params */ + if (unlikely((chain_id < 0 + || chain_id >= OMAP_LOGICAL_DMA_CH_COUNT))) { + printk(KERN_ERR "Invalid chain id\n"); + return -EINVAL; + } + + /* Check if the chain exists */ + if (dma_linked_lch[chain_id].linked_dmach_q == NULL) { + printk(KERN_ERR "Chain doesn't exist\n"); + return -EINVAL; + } + + /* Check if all the channels in chain are in use */ + if (OMAP_DMA_CHAIN_QFULL(chain_id)) + return -EBUSY; + + /* Frame count may be negative in case of indexed transfers */ + channels = dma_linked_lch[chain_id].linked_dmach_q; + + /* Get a free channel */ + lch = channels[dma_linked_lch[chain_id].q_tail]; + + /* Store the callback data */ + dma_chan[lch].data = callbk_data; + + /* Increment the q_tail */ + OMAP_DMA_CHAIN_INCQTAIL(chain_id); + + /* Set the params to the free channel */ + if (src_start != 0) + OMAP2_DMA_CSSA_REG(lch) = src_start; + if (dest_start != 0) + OMAP2_DMA_CDSA_REG(lch) = dest_start; + + /* Write the buffer size */ + OMAP_DMA_CEN_REG(lch) = elem_count; + OMAP_DMA_CFN_REG(lch) = frame_count; + + /* If the chain is dynamically linked, + * then we may have to start the chain if its not active */ + if (dma_linked_lch[chain_id].chain_mode == OMAP_DMA_DYNAMIC_CHAIN) { + + /* In Dynamic chain, if the chain is not started, + * queue the channel */ + if (dma_linked_lch[chain_id].chain_state == + DMA_CHAIN_NOTSTARTED) { + /* Enable the link in previous channel */ + if (dma_chan[dma_chan[lch].prev_linked_ch].state == + DMA_CH_QUEUED) + enable_lnk(dma_chan[lch].prev_linked_ch); + dma_chan[lch].state = DMA_CH_QUEUED; + } + + /* Chain is already started, make sure its active, + * if not then start the chain */ + else { + start_dma = 1; + + if (dma_chan[dma_chan[lch].prev_linked_ch].state == + DMA_CH_STARTED) { + enable_lnk(dma_chan[lch].prev_linked_ch); + dma_chan[lch].state = DMA_CH_QUEUED; + start_dma = 0; + if (0 == ((1 << 7) & (OMAP_DMA_CCR_REG + (dma_chan[lch].prev_linked_ch)))) { + disable_lnk(dma_chan[lch]. + prev_linked_ch); + pr_debug("\n prev ch is stopped\n"); + start_dma = 1; + } + } + + else if (dma_chan[dma_chan[lch].prev_linked_ch].state + == DMA_CH_QUEUED) { + enable_lnk(dma_chan[lch].prev_linked_ch); + dma_chan[lch].state = DMA_CH_QUEUED; + start_dma = 0; + } + omap_enable_channel_irq(lch); + + w = OMAP_DMA_CCR_REG(lch); + + if ((0 == (w & (1 << 24)))) + w &= ~(1 << 25); + else + w |= (1 << 25); + if (start_dma == 1) { + if (0 == (w & (1 << 7))) { + w |= (1 << 7); + dma_chan[lch].state = DMA_CH_STARTED; + pr_debug("starting %d\n", lch); + OMAP_DMA_CCR_REG(lch) = w; + } else + start_dma = 0; + } else { + if (0 == (w & (1 << 7))) + OMAP_DMA_CCR_REG(lch) = w; + } + dma_chan[lch].flags |= OMAP_DMA_ACTIVE; + } + } + return start_dma; +} +EXPORT_SYMBOL(omap_dma_chain_a_transfer); + +/** + * @brief omap_start_dma_chain_transfers - Start the chain + * + * @param chain_id + * + * @return - Success : 0 + * Failure : -EINVAL/-EBUSY + */ +int omap_start_dma_chain_transfers(int chain_id) +{ + int *channels; + u32 w, i; + + if (unlikely((chain_id < 0 || chain_id >= OMAP_LOGICAL_DMA_CH_COUNT))) { + printk(KERN_ERR "Invalid chain id\n"); + return -EINVAL; + } + + channels = dma_linked_lch[chain_id].linked_dmach_q; + + if (dma_linked_lch[channels[0]].chain_state == DMA_CHAIN_STARTED) { + printk(KERN_ERR "Chain is already started\n"); + return -EBUSY; + } + + if (dma_linked_lch[chain_id].chain_mode == OMAP_DMA_STATIC_CHAIN) { + for (i = 0; i < dma_linked_lch[chain_id].no_of_lchs_linked; + i++) { + enable_lnk(channels[i]); + omap_enable_channel_irq(channels[i]); + } + } else { + omap_enable_channel_irq(channels[0]); + } + + w = OMAP_DMA_CCR_REG(channels[0]); + w |= (1 << 7); + dma_linked_lch[chain_id].chain_state = DMA_CHAIN_STARTED; + dma_chan[channels[0]].state = DMA_CH_STARTED; + + if ((0 == (w & (1 << 24)))) + w &= ~(1 << 25); + else + w |= (1 << 25); + OMAP_DMA_CCR_REG(channels[0]) = w; + + dma_chan[channels[0]].flags |= OMAP_DMA_ACTIVE; + return 0; +} +EXPORT_SYMBOL(omap_start_dma_chain_transfers); + +/** + * @brief omap_stop_dma_chain_transfers - Stop the dma transfer of a chain. + * + * @param chain_id + * + * @return - Success : 0 + * Failure : EINVAL + */ +int omap_stop_dma_chain_transfers(int chain_id) +{ + int *channels; + u32 w, i; + u32 sys_cf; + + /* Check for input params */ + if (unlikely((chain_id < 0 || chain_id >= OMAP_LOGICAL_DMA_CH_COUNT))) { + printk(KERN_ERR "Invalid chain id\n"); + return -EINVAL; + } + + /* Check if the chain exists */ + if (dma_linked_lch[chain_id].linked_dmach_q == NULL) { + printk(KERN_ERR "Chain doesn't exists\n"); + return -EINVAL; + } + channels = dma_linked_lch[chain_id].linked_dmach_q; + + /* DMA Errata: + * Special programming model needed to disable DMA before end of block + */ + sys_cf = omap_readl(OMAP_DMA4_OCP_SYSCONFIG); + w = sys_cf; + /* Middle mode reg set no Standby */ + w &= ~((1 << 12)|(1 << 13)); + omap_writel(w, OMAP_DMA4_OCP_SYSCONFIG); + + for (i = 0; i < dma_linked_lch[chain_id].no_of_lchs_linked; i++) { + + /* Stop the Channel transmission */ + w = OMAP_DMA_CCR_REG(channels[i]); + w &= ~(1 << 7); + OMAP_DMA_CCR_REG(channels[i]) = w; + + /* Disable the link in all the channels */ + disable_lnk(channels[i]); + dma_chan[channels[i]].state = DMA_CH_NOTSTARTED; + + } + dma_linked_lch[chain_id].chain_state = DMA_CHAIN_NOTSTARTED; + + /* Reset the Queue pointers */ + OMAP_DMA_CHAIN_QINIT(chain_id); + + /* Errata - put in the old value */ + omap_writel(sys_cf, OMAP_DMA4_OCP_SYSCONFIG); + return 0; +} +EXPORT_SYMBOL(omap_stop_dma_chain_transfers); + +/* Get the index of the ongoing DMA in chain */ +/** + * @brief omap_get_dma_chain_index - Get the element and frame index + * of the ongoing DMA in chain + * + * @param chain_id + * @param ei - Element index + * @param fi - Frame index + * + * @return - Success : 0 + * Failure : -EINVAL + */ +int omap_get_dma_chain_index(int chain_id, int *ei, int *fi) +{ + int lch; + int *channels; + + /* Check for input params */ + if (unlikely((chain_id < 0 || chain_id >= OMAP_LOGICAL_DMA_CH_COUNT))) { + printk(KERN_ERR "Invalid chain id\n"); + return -EINVAL; + } + + /* Check if the chain exists */ + if (dma_linked_lch[chain_id].linked_dmach_q == NULL) { + printk(KERN_ERR "Chain doesn't exists\n"); + return -EINVAL; + } + if ((!ei) || (!fi)) + return -EINVAL; + + channels = dma_linked_lch[chain_id].linked_dmach_q; + + /* Get the current channel */ + lch = channels[dma_linked_lch[chain_id].q_head]; + + *ei = OMAP2_DMA_CCEN_REG(lch); + *fi = OMAP2_DMA_CCFN_REG(lch); + + return 0; +} +EXPORT_SYMBOL(omap_get_dma_chain_index); + +/** + * @brief omap_get_dma_chain_dst_pos - Get the destination position of the + * ongoing DMA in chain + * + * @param chain_id + * + * @return - Success : Destination position + * Failure : -EINVAL + */ +int omap_get_dma_chain_dst_pos(int chain_id) +{ + int lch; + int *channels; + + /* Check for input params */ + if (unlikely((chain_id < 0 || chain_id >= OMAP_LOGICAL_DMA_CH_COUNT))) { + printk(KERN_ERR "Invalid chain id\n"); + return -EINVAL; + } + + /* Check if the chain exists */ + if (dma_linked_lch[chain_id].linked_dmach_q == NULL) { + printk(KERN_ERR "Chain doesn't exists\n"); + return -EINVAL; + } + + channels = dma_linked_lch[chain_id].linked_dmach_q; + + /* Get the current channel */ + lch = channels[dma_linked_lch[chain_id].q_head]; + + return (OMAP_DMA_CDAC_REG(lch)); +} +EXPORT_SYMBOL(omap_get_dma_chain_dst_pos); + +/** + * @brief omap_get_dma_chain_src_pos - Get the source position + * of the ongoing DMA in chain + * @param chain_id + * + * @return - Success : Destination position + * Failure : -EINVAL + */ +int omap_get_dma_chain_src_pos(int chain_id) +{ + int lch; + int *channels; + + /* Check for input params */ + if (unlikely((chain_id < 0 || chain_id >= OMAP_LOGICAL_DMA_CH_COUNT))) { + printk(KERN_ERR "Invalid chain id\n"); + return -EINVAL; + } + + /* Check if the chain exists */ + if (dma_linked_lch[chain_id].linked_dmach_q == NULL) { + printk(KERN_ERR "Chain doesn't exists\n"); + return -EINVAL; + } + + channels = dma_linked_lch[chain_id].linked_dmach_q; + + /* Get the current channel */ + lch = channels[dma_linked_lch[chain_id].q_head]; + + return (OMAP_DMA_CSAC_REG(lch)); +} +EXPORT_SYMBOL(omap_get_dma_chain_src_pos); +#endif + /*----------------------------------------------------------------------------*/ #ifdef CONFIG_ARCH_OMAP1 @@ -919,7 +1654,7 @@ static irqreturn_t omap1_dma_irq_handler(int irq, void *dev_id) #define omap1_dma_irq_handler NULL #endif -#ifdef CONFIG_ARCH_OMAP2 +#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) static int omap2_dma_handle_ch(int ch) { @@ -953,8 +1688,33 @@ static int omap2_dma_handle_ch(int ch) OMAP_DMA_CSR_REG(ch) = OMAP2_DMA_CSR_CLEAR_MASK; omap_writel(1 << ch, OMAP_DMA4_IRQSTATUS_L0); - if (likely(dma_chan[ch].callback != NULL)) - dma_chan[ch].callback(ch, status, dma_chan[ch].data); + /* If the ch is not chained then chain_id will be -1 */ + if (dma_chan[ch].chain_id != -1) { + int chain_id = dma_chan[ch].chain_id; + dma_chan[ch].state = DMA_CH_NOTSTARTED; + if (OMAP_DMA_CLNK_CTRL_REG(ch) & (1 << 15)) + dma_chan[dma_chan[ch].next_linked_ch].state = + DMA_CH_STARTED; + if (dma_linked_lch[chain_id].chain_mode == + OMAP_DMA_DYNAMIC_CHAIN) + disable_lnk(ch); + + if (!OMAP_DMA_CHAIN_QEMPTY(chain_id)) + OMAP_DMA_CHAIN_INCQHEAD(chain_id); + + status = OMAP_DMA_CSR_REG(ch); + } + + if (likely(dma_chan[ch].callback != NULL)) { + if (dma_chan[ch].chain_id != -1) + dma_chan[ch].callback(dma_chan[ch].chain_id, status, + dma_chan[ch].data); + else + dma_chan[ch].callback(ch, status, dma_chan[ch].data); + + } + + OMAP_DMA_CSR_REG(ch) = status; return 0; } @@ -1385,7 +2145,7 @@ static int __init omap_init_dma(void) w &= ~(1 << 8); omap_writew(w, OMAP1610_DMA_LCD_CTRL); } - } else if (cpu_is_omap24xx()) { + } else if (cpu_class_is_omap2()) { u8 revision = omap_readb(OMAP_DMA4_REVISION); printk(KERN_INFO "OMAP DMA hardware revision %d.%d\n", revision >> 4, revision & 0xf); @@ -1428,7 +2188,11 @@ static int __init omap_init_dma(void) } } - if (cpu_is_omap24xx()) + if (cpu_is_omap2430() || cpu_is_omap34xx()) + omap_dma_set_global_params(DMA_DEFAULT_ARB_RATE, + DMA_DEFAULT_FIFO_DEPTH, 0); + + if (cpu_class_is_omap2()) setup_irq(INT_24XX_SDMA_IRQ0, &omap24xx_dma_irq); /* FIXME: Update LCD DMA to work on 24xx */ diff --git a/include/asm-arm/arch-omap/dma.h b/include/asm-arm/arch-omap/dma.h index f33b467fddb..24acf090030 100644 --- a/include/asm-arm/arch-omap/dma.h +++ b/include/asm-arm/arch-omap/dma.h @@ -45,22 +45,28 @@ #define OMAP_DMA_PCHD_SR (OMAP_DMA_BASE + 0x4c0) /* Hardware registers for omap2 */ -#define OMAP24XX_DMA_BASE (L4_24XX_BASE + 0x56000) -#define OMAP_DMA4_REVISION (OMAP24XX_DMA_BASE + 0x00) -#define OMAP_DMA4_GCR_REG (OMAP24XX_DMA_BASE + 0x78) -#define OMAP_DMA4_IRQSTATUS_L0 (OMAP24XX_DMA_BASE + 0x08) -#define OMAP_DMA4_IRQSTATUS_L1 (OMAP24XX_DMA_BASE + 0x0c) -#define OMAP_DMA4_IRQSTATUS_L2 (OMAP24XX_DMA_BASE + 0x10) -#define OMAP_DMA4_IRQSTATUS_L3 (OMAP24XX_DMA_BASE + 0x14) -#define OMAP_DMA4_IRQENABLE_L0 (OMAP24XX_DMA_BASE + 0x18) -#define OMAP_DMA4_IRQENABLE_L1 (OMAP24XX_DMA_BASE + 0x1c) -#define OMAP_DMA4_IRQENABLE_L2 (OMAP24XX_DMA_BASE + 0x20) -#define OMAP_DMA4_IRQENABLE_L3 (OMAP24XX_DMA_BASE + 0x24) -#define OMAP_DMA4_SYSSTATUS (OMAP24XX_DMA_BASE + 0x28) -#define OMAP_DMA4_CAPS_0 (OMAP24XX_DMA_BASE + 0x64) -#define OMAP_DMA4_CAPS_2 (OMAP24XX_DMA_BASE + 0x6c) -#define OMAP_DMA4_CAPS_3 (OMAP24XX_DMA_BASE + 0x70) -#define OMAP_DMA4_CAPS_4 (OMAP24XX_DMA_BASE + 0x74) +#if defined(CONFIG_ARCH_OMAP3) +#define OMAP_DMA4_BASE (L4_34XX_BASE + 0x56000) +#else /* CONFIG_ARCH_OMAP2 */ +#define OMAP_DMA4_BASE (L4_24XX_BASE + 0x56000) +#endif + +#define OMAP_DMA4_REVISION (OMAP_DMA4_BASE + 0x00) +#define OMAP_DMA4_GCR_REG (OMAP_DMA4_BASE + 0x78) +#define OMAP_DMA4_IRQSTATUS_L0 (OMAP_DMA4_BASE + 0x08) +#define OMAP_DMA4_IRQSTATUS_L1 (OMAP_DMA4_BASE + 0x0c) +#define OMAP_DMA4_IRQSTATUS_L2 (OMAP_DMA4_BASE + 0x10) +#define OMAP_DMA4_IRQSTATUS_L3 (OMAP_DMA4_BASE + 0x14) +#define OMAP_DMA4_IRQENABLE_L0 (OMAP_DMA4_BASE + 0x18) +#define OMAP_DMA4_IRQENABLE_L1 (OMAP_DMA4_BASE + 0x1c) +#define OMAP_DMA4_IRQENABLE_L2 (OMAP_DMA4_BASE + 0x20) +#define OMAP_DMA4_IRQENABLE_L3 (OMAP_DMA4_BASE + 0x24) +#define OMAP_DMA4_SYSSTATUS (OMAP_DMA4_BASE + 0x28) +#define OMAP_DMA4_OCP_SYSCONFIG (OMAP_DMA4_BASE + 0x2c) +#define OMAP_DMA4_CAPS_0 (OMAP_DMA4_BASE + 0x64) +#define OMAP_DMA4_CAPS_2 (OMAP_DMA4_BASE + 0x6c) +#define OMAP_DMA4_CAPS_3 (OMAP_DMA4_BASE + 0x70) +#define OMAP_DMA4_CAPS_4 (OMAP_DMA4_BASE + 0x74) #ifdef CONFIG_ARCH_OMAP1 @@ -86,19 +92,19 @@ #define OMAP_LOGICAL_DMA_CH_COUNT 32 /* REVISIT: Is this 32 + 2? */ /* Common channel specific registers for omap2 */ -#define OMAP_DMA_CCR_REG(n) __REG32(OMAP24XX_DMA_BASE + 0x60 * (n) + 0x80) -#define OMAP_DMA_CLNK_CTRL_REG(n) __REG32(OMAP24XX_DMA_BASE + 0x60 * (n) + 0x84) -#define OMAP_DMA_CICR_REG(n) __REG32(OMAP24XX_DMA_BASE + 0x60 * (n) + 0x88) -#define OMAP_DMA_CSR_REG(n) __REG32(OMAP24XX_DMA_BASE + 0x60 * (n) + 0x8c) -#define OMAP_DMA_CSDP_REG(n) __REG32(OMAP24XX_DMA_BASE + 0x60 * (n) + 0x90) -#define OMAP_DMA_CEN_REG(n) __REG32(OMAP24XX_DMA_BASE + 0x60 * (n) + 0x94) -#define OMAP_DMA_CFN_REG(n) __REG32(OMAP24XX_DMA_BASE + 0x60 * (n) + 0x98) -#define OMAP_DMA_CSEI_REG(n) __REG32(OMAP24XX_DMA_BASE + 0x60 * (n) + 0xa4) -#define OMAP_DMA_CSFI_REG(n) __REG32(OMAP24XX_DMA_BASE + 0x60 * (n) + 0xa8) -#define OMAP_DMA_CDEI_REG(n) __REG32(OMAP24XX_DMA_BASE + 0x60 * (n) + 0xac) -#define OMAP_DMA_CDFI_REG(n) __REG32(OMAP24XX_DMA_BASE + 0x60 * (n) + 0xb0) -#define OMAP_DMA_CSAC_REG(n) __REG32(OMAP24XX_DMA_BASE + 0x60 * (n) + 0xb4) -#define OMAP_DMA_CDAC_REG(n) __REG32(OMAP24XX_DMA_BASE + 0x60 * (n) + 0xb8) +#define OMAP_DMA_CCR_REG(n) __REG32(OMAP_DMA4_BASE + 0x60 * (n) + 0x80) +#define OMAP_DMA_CLNK_CTRL_REG(n) __REG32(OMAP_DMA4_BASE + 0x60 * (n) + 0x84) +#define OMAP_DMA_CICR_REG(n) __REG32(OMAP_DMA4_BASE + 0x60 * (n) + 0x88) +#define OMAP_DMA_CSR_REG(n) __REG32(OMAP_DMA4_BASE + 0x60 * (n) + 0x8c) +#define OMAP_DMA_CSDP_REG(n) __REG32(OMAP_DMA4_BASE + 0x60 * (n) + 0x90) +#define OMAP_DMA_CEN_REG(n) __REG32(OMAP_DMA4_BASE + 0x60 * (n) + 0x94) +#define OMAP_DMA_CFN_REG(n) __REG32(OMAP_DMA4_BASE + 0x60 * (n) + 0x98) +#define OMAP_DMA_CSEI_REG(n) __REG32(OMAP_DMA4_BASE + 0x60 * (n) + 0xa4) +#define OMAP_DMA_CSFI_REG(n) __REG32(OMAP_DMA4_BASE + 0x60 * (n) + 0xa8) +#define OMAP_DMA_CDEI_REG(n) __REG32(OMAP_DMA4_BASE + 0x60 * (n) + 0xac) +#define OMAP_DMA_CDFI_REG(n) __REG32(OMAP_DMA4_BASE + 0x60 * (n) + 0xb0) +#define OMAP_DMA_CSAC_REG(n) __REG32(OMAP_DMA4_BASE + 0x60 * (n) + 0xb4) +#define OMAP_DMA_CDAC_REG(n) __REG32(OMAP_DMA4_BASE + 0x60 * (n) + 0xb8) #endif @@ -113,11 +119,11 @@ #define OMAP1_DMA_LCH_CTRL_REG(n) __REG16(OMAP_DMA_BASE + 0x40 * (n) + 0x2a) /* Channel specific registers only on omap2 */ -#define OMAP2_DMA_CSSA_REG(n) __REG32(OMAP24XX_DMA_BASE + 0x60 * (n) + 0x9c) -#define OMAP2_DMA_CDSA_REG(n) __REG32(OMAP24XX_DMA_BASE + 0x60 * (n) + 0xa0) -#define OMAP2_DMA_CCEN_REG(n) __REG32(OMAP24XX_DMA_BASE + 0x60 * (n) + 0xbc) -#define OMAP2_DMA_CCFN_REG(n) __REG32(OMAP24XX_DMA_BASE + 0x60 * (n) + 0xc0) -#define OMAP2_DMA_COLOR_REG(n) __REG32(OMAP24XX_DMA_BASE + 0x60 * (n) + 0xc4) +#define OMAP2_DMA_CSSA_REG(n) __REG32(OMAP_DMA4_BASE + 0x60 * (n) + 0x9c) +#define OMAP2_DMA_CDSA_REG(n) __REG32(OMAP_DMA4_BASE + 0x60 * (n) + 0xa0) +#define OMAP2_DMA_CCEN_REG(n) __REG32(OMAP_DMA4_BASE + 0x60 * (n) + 0xbc) +#define OMAP2_DMA_CCFN_REG(n) __REG32(OMAP_DMA4_BASE + 0x60 * (n) + 0xc0) +#define OMAP2_DMA_COLOR_REG(n) __REG32(OMAP_DMA4_BASE + 0x60 * (n) + 0xc4) /*----------------------------------------------------------------------------*/ @@ -297,6 +303,10 @@ #define OMAP_DMA_SYNC_ELEMENT 0x00 #define OMAP_DMA_SYNC_FRAME 0x01 #define OMAP_DMA_SYNC_BLOCK 0x02 +#define OMAP_DMA_SYNC_PACKET 0x03 + +#define OMAP_DMA_SRC_SYNC 0x01 +#define OMAP_DMA_DST_SYNC 0x00 #define OMAP_DMA_PORT_EMIFF 0x00 #define OMAP_DMA_PORT_EMIFS 0x01 @@ -310,6 +320,29 @@ #define OMAP_DMA_AMODE_SINGLE_IDX 0x02 #define OMAP_DMA_AMODE_DOUBLE_IDX 0x03 +#define DMA_DEFAULT_FIFO_DEPTH 0x10 +#define DMA_DEFAULT_ARB_RATE 0x01 +/* Pass THREAD_RESERVE ORed with THREAD_FIFO for tparams */ +#define DMA_THREAD_RESERVE_NORM (0x00 << 12) /* Def */ +#define DMA_THREAD_RESERVE_ONET (0x01 << 12) +#define DMA_THREAD_RESERVE_TWOT (0x02 << 12) +#define DMA_THREAD_RESERVE_THREET (0x03 << 12) +#define DMA_THREAD_FIFO_NONE (0x00 << 14) /* Def */ +#define DMA_THREAD_FIFO_75 (0x01 << 14) +#define DMA_THREAD_FIFO_25 (0x02 << 14) +#define DMA_THREAD_FIFO_50 (0x03 << 14) + +/* Chaining modes*/ +#ifndef CONFIG_ARCH_OMAP1 +#define OMAP_DMA_STATIC_CHAIN 0x1 +#define OMAP_DMA_DYNAMIC_CHAIN 0x2 +#define OMAP_DMA_CHAIN_ACTIVE 0x1 +#define OMAP_DMA_CHAIN_INACTIVE 0x0 +#endif + +#define DMA_CH_PRIO_HIGH 0x1 +#define DMA_CH_PRIO_LOW 0x0 /* Def */ + /* LCD DMA block numbers */ enum { OMAP_LCD_DMA_B1_TOP, @@ -359,6 +392,13 @@ struct omap_dma_channel_params { int src_or_dst_synch; /* source synch(1) or destination synch(0) */ int ie; /* interrupt enabled */ + + unsigned char read_prio;/* read priority */ + unsigned char write_prio;/* write priority */ + +#ifndef CONFIG_ARCH_OMAP1 + enum omap_dma_burst_mode burst_mode; /* Burst mode 4/8/16 words */ +#endif }; @@ -409,6 +449,33 @@ extern dma_addr_t omap_get_dma_dst_pos(int lch); extern int omap_get_dma_src_addr_counter(int lch); extern void omap_clear_dma(int lch); extern int omap_dma_running(void); +extern void omap_dma_set_global_params(int arb_rate, int max_fifo_depth, + int tparams); +extern int omap_dma_set_prio_lch(int lch, unsigned char read_prio, + unsigned char write_prio); + +/* Chaining APIs */ +#ifndef CONFIG_ARCH_OMAP1 +extern int omap_request_dma_chain(int dev_id, const char *dev_name, + void (*callback) (int chain_id, u16 ch_status, + void *data), + int *chain_id, int no_of_chans, + int chain_mode, + struct omap_dma_channel_params params); +extern int omap_free_dma_chain(int chain_id); +extern int omap_dma_chain_a_transfer(int chain_id, int src_start, + int dest_start, int elem_count, + int frame_count, void *callbk_data); +extern int omap_start_dma_chain_transfers(int chain_id); +extern int omap_stop_dma_chain_transfers(int chain_id); +extern int omap_get_dma_chain_index(int chain_id, int *ei, int *fi); +extern int omap_get_dma_chain_dst_pos(int chain_id); +extern int omap_get_dma_chain_src_pos(int chain_id); + +extern int omap_modify_dma_chain_params(int chain_id, + struct omap_dma_channel_params params); +extern int omap_dma_chain_status(int chain_id); +#endif /* LCD DMA functions */ extern int omap_request_lcd_dma(void (* callback)(u16 status, void *data), -- cgit v1.2.3-70-g09d2 From 471b3aa70c2ba00e1a8c8399f848cbc04fd0beae Mon Sep 17 00:00:00 2001 From: "Syed Mohammed, Khasim" Date: Thu, 21 Jun 2007 21:48:07 -0700 Subject: ARM: OMAP: Pre-3430 clean-up for dmtimer.c Cleanup DM timer list for OMAP2 and OMAP1 to allow adding support for 3430. Signed-off-by: Syed Mohammed Khasim Signed-off-by: Tony Lindgren --- arch/arm/plat-omap/dmtimer.c | 65 ++++++++++++++++++++++++++++---------------- 1 file changed, 41 insertions(+), 24 deletions(-) (limited to 'arch') diff --git a/arch/arm/plat-omap/dmtimer.c b/arch/arm/plat-omap/dmtimer.c index 3856f5aedfc..0b5689edf2f 100644 --- a/arch/arm/plat-omap/dmtimer.c +++ b/arch/arm/plat-omap/dmtimer.c @@ -48,7 +48,7 @@ #define OMAP_TIMER_COUNTER_REG 0x28 #define OMAP_TIMER_LOAD_REG 0x2c #define OMAP_TIMER_TRIGGER_REG 0x30 -#define OMAP_TIMER_WRITE_PEND_REG 0x34 +#define OMAP_TIMER_WRITE_PEND_REG 0x34 #define OMAP_TIMER_MATCH_REG 0x38 #define OMAP_TIMER_CAPTURE_REG 0x3c #define OMAP_TIMER_IF_CTRL_REG 0x40 @@ -82,8 +82,11 @@ struct omap_dm_timer { #define omap_dm_clk_enable(x) #define omap_dm_clk_disable(x) +#define omap2_dm_timers NULL +#define omap2_dm_source_names NULL +#define omap2_dm_source_clocks NULL -static struct omap_dm_timer dm_timers[] = { +static struct omap_dm_timer omap1_dm_timers[] = { { .phys_base = 0xfffb1400, .irq = INT_1610_GPTIMER1 }, { .phys_base = 0xfffb1c00, .irq = INT_1610_GPTIMER2 }, { .phys_base = 0xfffb2400, .irq = INT_1610_GPTIMER3 }, @@ -94,12 +97,15 @@ static struct omap_dm_timer dm_timers[] = { { .phys_base = 0xfffbd400, .irq = INT_1610_GPTIMER8 }, }; +static const int dm_timer_count = ARRAY_SIZE(omap1_dm_timers); + #elif defined(CONFIG_ARCH_OMAP2) -#define omap_dm_clk_enable(x) clk_enable(x) -#define omap_dm_clk_disable(x) clk_disable(x) +#define omap_dm_clk_enable(x) clk_enable(x) +#define omap_dm_clk_disable(x) clk_disable(x) +#define omap1_dm_timers NULL -static struct omap_dm_timer dm_timers[] = { +static struct omap_dm_timer omap2_dm_timers[] = { { .phys_base = 0x48028000, .irq = INT_24XX_GPTIMER1 }, { .phys_base = 0x4802a000, .irq = INT_24XX_GPTIMER2 }, { .phys_base = 0x48078000, .irq = INT_24XX_GPTIMER3 }, @@ -114,13 +120,15 @@ static struct omap_dm_timer dm_timers[] = { { .phys_base = 0x4808a000, .irq = INT_24XX_GPTIMER12 }, }; -static const char *dm_source_names[] = { +static const char *omap2_dm_source_names[] __initdata = { "sys_ck", "func_32k_ck", - "alt_ck" + "alt_ck", + NULL }; -static struct clk *dm_source_clocks[3]; +static struct clk **omap2_dm_source_clocks[3]; +static const int dm_timer_count = ARRAY_SIZE(omap2_dm_timers); #else @@ -128,7 +136,10 @@ static struct clk *dm_source_clocks[3]; #endif -static const int dm_timer_count = ARRAY_SIZE(dm_timers); +static struct omap_dm_timer *dm_timers; +static char **dm_source_names; +static struct clk **dm_source_clocks; + static spinlock_t dm_timer_lock; static inline u32 omap_dm_timer_read_reg(struct omap_dm_timer *timer, int reg) @@ -486,7 +497,7 @@ int omap_dm_timers_active(void) return 0; } -int omap_dm_timer_init(void) +int __init omap_dm_timer_init(void) { struct omap_dm_timer *timer; int i; @@ -495,27 +506,33 @@ int omap_dm_timer_init(void) return -ENODEV; spin_lock_init(&dm_timer_lock); -#ifdef CONFIG_ARCH_OMAP2 - for (i = 0; i < ARRAY_SIZE(dm_source_names); i++) { - dm_source_clocks[i] = clk_get(NULL, dm_source_names[i]); - BUG_ON(dm_source_clocks[i] == NULL); + + if (cpu_class_is_omap1()) + dm_timers = omap1_dm_timers; + else if (cpu_is_omap24xx()) { + dm_timers = omap2_dm_timers; + dm_source_names = (char **)omap2_dm_source_names; + dm_source_clocks = (struct clk **)omap2_dm_source_clocks; } -#endif + + if (cpu_class_is_omap2()) + for (i = 0; dm_source_names[i] != NULL; i++) + dm_source_clocks[i] = clk_get(NULL, dm_source_names[i]); + if (cpu_is_omap243x()) dm_timers[0].phys_base = 0x49018000; for (i = 0; i < dm_timer_count; i++) { -#ifdef CONFIG_ARCH_OMAP2 - char clk_name[16]; -#endif - timer = &dm_timers[i]; - timer->io_base = (void __iomem *) io_p2v(timer->phys_base); + timer->io_base = (void __iomem *)io_p2v(timer->phys_base); #ifdef CONFIG_ARCH_OMAP2 - sprintf(clk_name, "gpt%d_ick", i + 1); - timer->iclk = clk_get(NULL, clk_name); - sprintf(clk_name, "gpt%d_fck", i + 1); - timer->fclk = clk_get(NULL, clk_name); + if (cpu_class_is_omap2()) { + char clk_name[16]; + sprintf(clk_name, "gpt%d_ick", i + 1); + timer->iclk = clk_get(NULL, clk_name); + sprintf(clk_name, "gpt%d_fck", i + 1); + timer->fclk = clk_get(NULL, clk_name); + } #endif } -- cgit v1.2.3-70-g09d2 From ce2df9ca41997f38cdfb9bee0db08763487222ae Mon Sep 17 00:00:00 2001 From: "Syed Mohammed, Khasim" Date: Mon, 25 Jun 2007 22:55:39 -0700 Subject: ARM: OMAP: Add dmtimer support for OMAP3 Add DM timer support for OMAP3. Fixed source clocks for 3430 by Paul Walmsley . Signed-off-by: Syed Mohammed Khasim Signed-off-by: Paul Walmsley Signed-off-by: Tony Lindgren --- arch/arm/plat-omap/dmtimer.c | 51 ++++++++++++++++++++++++++++++++++++++++---- 1 file changed, 47 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/arm/plat-omap/dmtimer.c b/arch/arm/plat-omap/dmtimer.c index 0b5689edf2f..e719d0eeb5c 100644 --- a/arch/arm/plat-omap/dmtimer.c +++ b/arch/arm/plat-omap/dmtimer.c @@ -70,7 +70,7 @@ struct omap_dm_timer { unsigned long phys_base; int irq; -#ifdef CONFIG_ARCH_OMAP2 +#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) struct clk *iclk, *fclk; #endif void __iomem *io_base; @@ -85,6 +85,9 @@ struct omap_dm_timer { #define omap2_dm_timers NULL #define omap2_dm_source_names NULL #define omap2_dm_source_clocks NULL +#define omap3_dm_timers NULL +#define omap3_dm_source_names NULL +#define omap3_dm_source_clocks NULL static struct omap_dm_timer omap1_dm_timers[] = { { .phys_base = 0xfffb1400, .irq = INT_1610_GPTIMER1 }, @@ -104,6 +107,9 @@ static const int dm_timer_count = ARRAY_SIZE(omap1_dm_timers); #define omap_dm_clk_enable(x) clk_enable(x) #define omap_dm_clk_disable(x) clk_disable(x) #define omap1_dm_timers NULL +#define omap3_dm_timers NULL +#define omap3_dm_source_names NULL +#define omap3_dm_source_clocks NULL static struct omap_dm_timer omap2_dm_timers[] = { { .phys_base = 0x48028000, .irq = INT_24XX_GPTIMER1 }, @@ -130,6 +136,39 @@ static const char *omap2_dm_source_names[] __initdata = { static struct clk **omap2_dm_source_clocks[3]; static const int dm_timer_count = ARRAY_SIZE(omap2_dm_timers); +#elif defined(CONFIG_ARCH_OMAP3) + +#define omap_dm_clk_enable(x) clk_enable(x) +#define omap_dm_clk_disable(x) clk_disable(x) +#define omap1_dm_timers NULL +#define omap2_dm_timers NULL +#define omap2_dm_source_names NULL +#define omap2_dm_source_clocks NULL + +static struct omap_dm_timer omap3_dm_timers[] = { + { .phys_base = 0x48318000, .irq = INT_24XX_GPTIMER1 }, + { .phys_base = 0x49032000, .irq = INT_24XX_GPTIMER2 }, + { .phys_base = 0x49034000, .irq = INT_24XX_GPTIMER3 }, + { .phys_base = 0x49036000, .irq = INT_24XX_GPTIMER4 }, + { .phys_base = 0x49038000, .irq = INT_24XX_GPTIMER5 }, + { .phys_base = 0x4903A000, .irq = INT_24XX_GPTIMER6 }, + { .phys_base = 0x4903C000, .irq = INT_24XX_GPTIMER7 }, + { .phys_base = 0x4903E000, .irq = INT_24XX_GPTIMER8 }, + { .phys_base = 0x49040000, .irq = INT_24XX_GPTIMER9 }, + { .phys_base = 0x48086000, .irq = INT_24XX_GPTIMER10 }, + { .phys_base = 0x48088000, .irq = INT_24XX_GPTIMER11 }, + { .phys_base = 0x48304000, .irq = INT_24XX_GPTIMER12 }, +}; + +static const char *omap3_dm_source_names[] __initdata = { + "sys_ck", + "omap_32k_fck", + NULL +}; + +static struct clk **omap3_dm_source_clocks[2]; +static const int dm_timer_count = ARRAY_SIZE(omap3_dm_timers); + #else #error OMAP architecture not supported! @@ -310,7 +349,7 @@ __u32 omap_dm_timer_modify_idlect_mask(__u32 inputmask) return inputmask; } -#elif defined(CONFIG_ARCH_OMAP2) +#elif defined(CONFIG_ARCH_OMAP2) || defined (CONFIG_ARCH_OMAP3) struct clk *omap_dm_timer_get_fclk(struct omap_dm_timer *timer) { @@ -502,7 +541,7 @@ int __init omap_dm_timer_init(void) struct omap_dm_timer *timer; int i; - if (!(cpu_is_omap16xx() || cpu_is_omap24xx())) + if (!(cpu_is_omap16xx() || cpu_class_is_omap2())) return -ENODEV; spin_lock_init(&dm_timer_lock); @@ -513,6 +552,10 @@ int __init omap_dm_timer_init(void) dm_timers = omap2_dm_timers; dm_source_names = (char **)omap2_dm_source_names; dm_source_clocks = (struct clk **)omap2_dm_source_clocks; + } else if (cpu_is_omap34xx()) { + dm_timers = omap3_dm_timers; + dm_source_names = (char **)omap3_dm_source_names; + dm_source_clocks = (struct clk **)omap3_dm_source_clocks; } if (cpu_class_is_omap2()) @@ -525,7 +568,7 @@ int __init omap_dm_timer_init(void) for (i = 0; i < dm_timer_count; i++) { timer = &dm_timers[i]; timer->io_base = (void __iomem *)io_p2v(timer->phys_base); -#ifdef CONFIG_ARCH_OMAP2 +#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) if (cpu_class_is_omap2()) { char clk_name[16]; sprintf(clk_name, "gpt%d_ick", i + 1); -- cgit v1.2.3-70-g09d2 From 85d05fb3fde692fdaa6b1f84c33fee718abebf0f Mon Sep 17 00:00:00 2001 From: Jarkko Nikula Date: Wed, 7 Nov 2007 06:54:31 +0200 Subject: ARM: OMAP: Add helper module for board specific I2C bus registration This helper module simplifies I2C bus registration for different OMAP platforms by doing registration in one place only and to allow board specific bus configuration like clock rate and number of busses configured. Helper should cover OMAP processors from first to third generation. This patch just adds the feature and current implementation cleanup and board file modifications will be done in following patches. Signed-off-by: Jarkko Nikula Acked-by: David Brownell Signed-off-by: Tony Lindgren --- arch/arm/plat-omap/Makefile | 1 + arch/arm/plat-omap/i2c.c | 148 +++++++++++++++++++++++++++++++++++++ include/asm-arm/arch-omap/common.h | 11 +++ include/asm-arm/arch-omap/irqs.h | 2 + 4 files changed, 162 insertions(+) create mode 100644 arch/arm/plat-omap/i2c.c (limited to 'arch') diff --git a/arch/arm/plat-omap/Makefile b/arch/arm/plat-omap/Makefile index 2549129aabc..ce17df31b84 100644 --- a/arch/arm/plat-omap/Makefile +++ b/arch/arm/plat-omap/Makefile @@ -19,3 +19,4 @@ obj-$(CONFIG_CPU_FREQ) += cpu-omap.o obj-$(CONFIG_OMAP_DM_TIMER) += dmtimer.o obj-$(CONFIG_OMAP_DEBUG_DEVICES) += debug-devices.o obj-$(CONFIG_OMAP_DEBUG_LEDS) += debug-leds.o +obj-$(CONFIG_I2C_OMAP) += i2c.o diff --git a/arch/arm/plat-omap/i2c.c b/arch/arm/plat-omap/i2c.c new file mode 100644 index 00000000000..7990ab185bb --- /dev/null +++ b/arch/arm/plat-omap/i2c.c @@ -0,0 +1,148 @@ +/* + * linux/arch/arm/plat-omap/i2c.c + * + * Helper module for board specific I2C bus registration + * + * Copyright (C) 2007 Nokia Corporation. + * + * Contact: Jarkko Nikula + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + */ + +#include +#include +#include +#include +#include + +#define OMAP_I2C_SIZE 0x3f +#define OMAP1_I2C_BASE 0xfffb3800 +#define OMAP2_I2C_BASE1 0x48070000 +#define OMAP2_I2C_BASE2 0x48072000 +#define OMAP2_I2C_BASE3 0x48060000 + +static const char name[] = "i2c_omap"; + +#define I2C_RESOURCE_BUILDER(base, irq) \ + { \ + .start = (base), \ + .end = (base) + OMAP_I2C_SIZE, \ + .flags = IORESOURCE_MEM, \ + }, \ + { \ + .start = (irq), \ + .flags = IORESOURCE_IRQ, \ + }, + +static struct resource i2c_resources[][2] = { + { I2C_RESOURCE_BUILDER(0, 0) }, +#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) + { I2C_RESOURCE_BUILDER(OMAP2_I2C_BASE2, INT_24XX_I2C2_IRQ) }, +#endif +#if defined(CONFIG_ARCH_OMAP34XX) + { I2C_RESOURCE_BUILDER(OMAP2_I2C_BASE3, INT_34XX_I2C3_IRQ) }, +#endif +}; + +#define I2C_DEV_BUILDER(bus_id, res, data) \ + { \ + .id = (bus_id), \ + .name = name, \ + .num_resources = ARRAY_SIZE(res), \ + .resource = (res), \ + .dev = { \ + .platform_data = (data), \ + }, \ + } + +static u32 i2c_rate[ARRAY_SIZE(i2c_resources)]; +static struct platform_device omap_i2c_devices[] = { + I2C_DEV_BUILDER(1, i2c_resources[0], &i2c_rate[0]), +#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) + I2C_DEV_BUILDER(2, i2c_resources[1], &i2c_rate[1]), +#endif +#if defined(CONFIG_ARCH_OMAP34XX) + I2C_DEV_BUILDER(3, i2c_resources[2], &i2c_rate[2]), +#endif +}; + +static void __init omap_i2c_mux_pins(int bus_id) +{ + /* TODO: Muxing for OMAP3 */ + switch (bus_id) { + case 1: + if (cpu_class_is_omap1()) { + omap_cfg_reg(I2C_SCL); + omap_cfg_reg(I2C_SDA); + } else if (cpu_is_omap24xx()) { + omap_cfg_reg(M19_24XX_I2C1_SCL); + omap_cfg_reg(L15_24XX_I2C1_SDA); + } + break; + case 2: + if (cpu_is_omap24xx()) { + omap_cfg_reg(J15_24XX_I2C2_SCL); + omap_cfg_reg(H19_24XX_I2C2_SDA); + } + break; + } +} + +int __init omap_register_i2c_bus(int bus_id, u32 clkrate, + struct i2c_board_info const *info, + unsigned len) +{ + int ports, err; + struct platform_device *pdev; + struct resource *res; + resource_size_t base, irq; + + if (cpu_class_is_omap1()) + ports = 1; + else if (cpu_is_omap24xx()) + ports = 2; + else if (cpu_is_omap34xx()) + ports = 3; + + BUG_ON(bus_id < 1 || bus_id > ports); + + if (info) { + err = i2c_register_board_info(bus_id, info, len); + if (err) + return err; + } + + pdev = &omap_i2c_devices[bus_id - 1]; + *(u32 *)pdev->dev.platform_data = clkrate; + + if (bus_id == 1) { + res = pdev->resource; + if (cpu_class_is_omap1()) { + base = OMAP1_I2C_BASE; + irq = INT_I2C; + } else { + base = OMAP2_I2C_BASE1; + irq = INT_24XX_I2C1_IRQ; + } + res[0].start = base; + res[0].end = base + OMAP_I2C_SIZE; + res[1].start = irq; + } + + omap_i2c_mux_pins(bus_id); + return platform_device_register(pdev); +} diff --git a/include/asm-arm/arch-omap/common.h b/include/asm-arm/arch-omap/common.h index 08d58abd821..442aecbb8f4 100644 --- a/include/asm-arm/arch-omap/common.h +++ b/include/asm-arm/arch-omap/common.h @@ -27,10 +27,21 @@ #ifndef __ARCH_ARM_MACH_OMAP_COMMON_H #define __ARCH_ARM_MACH_OMAP_COMMON_H +#ifdef CONFIG_I2C_OMAP +#include +#endif + struct sys_timer; extern void omap_map_common_io(void); extern struct sys_timer omap_timer; extern void omap_serial_init(void); +#ifdef CONFIG_I2C_OMAP +extern int omap_register_i2c_bus(int bus_id, u32 clkrate, + struct i2c_board_info const *info, + unsigned len); +#else +#define omap_register_i2c_bus(a, b, c, d) 0 +#endif #endif /* __ARCH_ARM_MACH_OMAP_COMMON_H */ diff --git a/include/asm-arm/arch-omap/irqs.h b/include/asm-arm/arch-omap/irqs.h index 3ede58b51db..87973654e62 100644 --- a/include/asm-arm/arch-omap/irqs.h +++ b/include/asm-arm/arch-omap/irqs.h @@ -263,6 +263,8 @@ #define INT_24XX_GPTIMER10 46 #define INT_24XX_GPTIMER11 47 #define INT_24XX_GPTIMER12 48 +#define INT_24XX_I2C1_IRQ 56 +#define INT_24XX_I2C2_IRQ 57 #define INT_24XX_MCBSP1_IRQ_TX 59 #define INT_24XX_MCBSP1_IRQ_RX 60 #define INT_24XX_MCBSP2_IRQ_TX 62 -- cgit v1.2.3-70-g09d2 From 78be63252bc9065dd0a12c106135655b7d4db1ec Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Tue, 11 Dec 2007 13:50:17 -0800 Subject: ARM: OMAP1: Make omap1 boards to use omap_nand_platform_data This patch adds omap_nand_platform data based on a patch by Shahrom Sharif-Kashani , and makes omap1 boards to use omap_nand_platform_data instead of nand_platform_data used earlier. Signed-off-by: Tony Lindgren --- arch/arm/mach-omap1/board-fsample.c | 5 +++-- arch/arm/mach-omap1/board-h2.c | 16 ++++++---------- arch/arm/mach-omap1/board-h3.c | 5 +++-- arch/arm/mach-omap1/board-perseus2.c | 5 +++-- include/asm-arm/arch-omap/nand.h | 24 ++++++++++++++++++++++++ 5 files changed, 39 insertions(+), 16 deletions(-) create mode 100644 include/asm-arm/arch-omap/nand.h (limited to 'arch') diff --git a/arch/arm/mach-omap1/board-fsample.c b/arch/arm/mach-omap1/board-fsample.c index f550b19e1ec..4f4640ba2a9 100644 --- a/arch/arm/mach-omap1/board-fsample.c +++ b/arch/arm/mach-omap1/board-fsample.c @@ -30,6 +30,7 @@ #include #include #include +#include #include #include #include @@ -134,7 +135,7 @@ static struct platform_device nor_device = { .resource = &nor_resource, }; -static struct nand_platform_data nand_data = { +static struct omap_nand_platform_data nand_data = { .options = NAND_SAMSUNG_LP_OPTIONS, }; @@ -202,7 +203,7 @@ static struct platform_device *devices[] __initdata = { #define P2_NAND_RB_GPIO_PIN 62 -static int nand_dev_ready(struct nand_platform_data *data) +static int nand_dev_ready(struct omap_nand_platform_data *data) { return omap_get_gpio_datain(P2_NAND_RB_GPIO_PIN); } diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c index bfa04fa2552..1a69002e3f8 100644 --- a/arch/arm/mach-omap1/board-h2.c +++ b/arch/arm/mach-omap1/board-h2.c @@ -39,6 +39,7 @@ #include #include +#include #include #include #include @@ -140,8 +141,6 @@ static struct platform_device h2_nor_device = { .resource = &h2_nor_resource, }; -#if 0 /* REVISIT: Enable when nand_platform_data is applied */ - static struct mtd_partition h2_nand_partitions[] = { #if 0 /* REVISIT: enable these partitions if you make NAND BOOT @@ -179,7 +178,7 @@ static struct mtd_partition h2_nand_partitions[] = { }; /* dip switches control NAND chip access: 8 bit, 16 bit, or neither */ -static struct nand_platform_data h2_nand_data = { +static struct omap_nand_platform_data h2_nand_data = { .options = NAND_SAMSUNG_LP_OPTIONS, .parts = h2_nand_partitions, .nr_parts = ARRAY_SIZE(h2_nand_partitions), @@ -198,7 +197,6 @@ static struct platform_device h2_nand_device = { .num_resources = 1, .resource = &h2_nand_resource, }; -#endif static struct resource h2_smc91x_resources[] = { [0] = { @@ -335,7 +333,7 @@ static struct platform_device h2_mcbsp1_device = { static struct platform_device *h2_devices[] __initdata = { &h2_nor_device, - //&h2_nand_device, + &h2_nand_device, &h2_smc91x_device, &h2_irda_device, &h2_kp_device, @@ -409,15 +407,15 @@ static struct omap_lcd_config h2_lcd_config __initdata = { }; static struct omap_board_config_kernel h2_config[] __initdata = { - { OMAP_TAG_USB, &h2_usb_config }, - { OMAP_TAG_MMC, &h2_mmc_config }, + { OMAP_TAG_USB, &h2_usb_config }, + { OMAP_TAG_MMC, &h2_mmc_config }, { OMAP_TAG_UART, &h2_uart_config }, { OMAP_TAG_LCD, &h2_lcd_config }, }; #define H2_NAND_RB_GPIO_PIN 62 -static int h2_nand_dev_ready(struct nand_platform_data *data) +static int h2_nand_dev_ready(struct omap_nand_platform_data *data) { return omap_get_gpio_datain(H2_NAND_RB_GPIO_PIN); } @@ -436,12 +434,10 @@ static void __init h2_init(void) h2_nor_resource.end = h2_nor_resource.start = omap_cs3_phys(); h2_nor_resource.end += SZ_32M - 1; -#if 0 /* REVISIT: Enable when nand_platform_data is applied */ h2_nand_resource.end = h2_nand_resource.start = OMAP_CS2B_PHYS; h2_nand_resource.end += SZ_4K - 1; if (!(omap_request_gpio(H2_NAND_RB_GPIO_PIN))) h2_nand_data.dev_ready = h2_nand_dev_ready; -#endif omap_cfg_reg(L3_1610_FLASH_CS2B_OE); omap_cfg_reg(M8_1610_FLASH_CS2B_WE); diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c index 05651986056..c4a7141bb78 100644 --- a/arch/arm/mach-omap1/board-h3.c +++ b/arch/arm/mach-omap1/board-h3.c @@ -42,6 +42,7 @@ #include #include #include +#include #include #include #include @@ -179,7 +180,7 @@ static struct mtd_partition nand_partitions[] = { }; /* dip switches control NAND chip access: 8 bit, 16 bit, or neither */ -static struct nand_platform_data nand_data = { +static struct omap_nand_platform_data nand_data = { .options = NAND_SAMSUNG_LP_OPTIONS, .parts = nand_partitions, .nr_parts = ARRAY_SIZE(nand_partitions), @@ -472,7 +473,7 @@ static struct i2c_board_info __initdata h3_i2c_board_info[] = { #define H3_NAND_RB_GPIO_PIN 10 -static int nand_dev_ready(struct nand_platform_data *data) +static int nand_dev_ready(struct omap_nand_platform_data *data) { return omap_get_gpio_datain(H3_NAND_RB_GPIO_PIN); } diff --git a/arch/arm/mach-omap1/board-perseus2.c b/arch/arm/mach-omap1/board-perseus2.c index 534dcfb9d26..e79749df434 100644 --- a/arch/arm/mach-omap1/board-perseus2.c +++ b/arch/arm/mach-omap1/board-perseus2.c @@ -30,6 +30,7 @@ #include #include #include +#include #include #include #include @@ -133,7 +134,7 @@ static struct platform_device nor_device = { .resource = &nor_resource, }; -static struct nand_platform_data nand_data = { +static struct omap_nand_platform_data nand_data = { .options = NAND_SAMSUNG_LP_OPTIONS, }; @@ -202,7 +203,7 @@ static struct platform_device *devices[] __initdata = { #define P2_NAND_RB_GPIO_PIN 62 -static int nand_dev_ready(struct nand_platform_data *data) +static int nand_dev_ready(struct omap_nand_platform_data *data) { return omap_get_gpio_datain(P2_NAND_RB_GPIO_PIN); } diff --git a/include/asm-arm/arch-omap/nand.h b/include/asm-arm/arch-omap/nand.h new file mode 100644 index 00000000000..17ae26e3535 --- /dev/null +++ b/include/asm-arm/arch-omap/nand.h @@ -0,0 +1,24 @@ +/* + * include/asm-arm/arch-omap/nand.h + * + * Copyright (C) 2006 Micron Technology Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include + +struct omap_nand_platform_data { + unsigned int options; + int cs; + int gpio_irq; + struct mtd_partition *parts; + int nr_parts; + int (*nand_setup)(void __iomem *); + int (*dev_ready)(struct omap_nand_platform_data *); + int dma_channel; + void __iomem *gpmc_cs_baseaddr; + void __iomem *gpmc_baseaddr; +}; -- cgit v1.2.3-70-g09d2 From 6e2d4107245cc0411959e91d7a1613e15097f117 Mon Sep 17 00:00:00 2001 From: David Cohen Date: Thu, 13 Dec 2007 22:27:15 -0400 Subject: ARM: OMAP1: Change the comments to C style Change the comments to C style Signed-off-by: David Cohen Signed-off-by: Tony Lindgren --- arch/arm/mach-omap1/board-ams-delta.c | 6 +++--- arch/arm/mach-omap1/board-h2.c | 22 +++++++++++----------- arch/arm/mach-omap1/board-h3.c | 14 +++++++------- arch/arm/mach-omap1/board-innovator.c | 18 +++++++++--------- arch/arm/mach-omap1/board-osk.c | 18 +++++++++--------- arch/arm/mach-omap1/board-palmtt.c | 12 ++++++------ arch/arm/mach-omap1/clock.c | 7 +++---- arch/arm/mach-omap1/leds-osk.c | 4 ++-- 8 files changed, 50 insertions(+), 51 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c index c73ca61e585..6aac72dc430 100644 --- a/arch/arm/mach-omap1/board-ams-delta.c +++ b/arch/arm/mach-omap1/board-ams-delta.c @@ -135,21 +135,21 @@ static void __init ams_delta_init_irq(void) } static struct map_desc ams_delta_io_desc[] __initdata = { - // AMS_DELTA_LATCH1 + /* AMS_DELTA_LATCH1 */ { .virtual = AMS_DELTA_LATCH1_VIRT, .pfn = __phys_to_pfn(AMS_DELTA_LATCH1_PHYS), .length = 0x01000000, .type = MT_DEVICE }, - // AMS_DELTA_LATCH2 + /* AMS_DELTA_LATCH2 */ { .virtual = AMS_DELTA_LATCH2_VIRT, .pfn = __phys_to_pfn(AMS_DELTA_LATCH2_PHYS), .length = 0x01000000, .type = MT_DEVICE }, - // AMS_DELTA_MODEM + /* AMS_DELTA_MODEM */ { .virtual = AMS_DELTA_MODEM_VIRT, .pfn = __phys_to_pfn(AMS_DELTA_MODEM_PHYS), diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c index 1a69002e3f8..18899d74d4c 100644 --- a/arch/arm/mach-omap1/board-h2.c +++ b/arch/arm/mach-omap1/board-h2.c @@ -309,18 +309,18 @@ static struct omap_mcbsp_reg_cfg mcbsp_regs = { .srgr2 = GSYNC | CLKSP | FSGM | FPER(31), .pcr0 = CLKXM | CLKRM | FSXP | FSRP | CLKXP | CLKRP, - //.pcr0 = CLKXP | CLKRP, /* mcbsp: slave */ + /*.pcr0 = CLKXP | CLKRP,*/ /* mcbsp: slave */ }; static struct omap_alsa_codec_config alsa_config = { .name = "H2 TSC2101", .mcbsp_regs_alsa = &mcbsp_regs, - .codec_configure_dev = NULL, // tsc2101_configure, - .codec_set_samplerate = NULL, // tsc2101_set_samplerate, - .codec_clock_setup = NULL, // tsc2101_clock_setup, - .codec_clock_on = NULL, // tsc2101_clock_on, - .codec_clock_off = NULL, // tsc2101_clock_off, - .get_default_samplerate = NULL, // tsc2101_get_default_samplerate, + .codec_configure_dev = NULL, /* tsc2101_configure, */ + .codec_set_samplerate = NULL, /* tsc2101_set_samplerate, */ + .codec_clock_setup = NULL, /* tsc2101_clock_setup, */ + .codec_clock_on = NULL, /* tsc2101_clock_on, */ + .codec_clock_off = NULL, /* tsc2101_clock_off, */ + .get_default_samplerate = NULL, /* tsc2101_get_default_samplerate, */ }; static struct platform_device h2_mcbsp1_device = { @@ -378,11 +378,11 @@ static struct omap_usb_config h2_usb_config __initdata = { .otg = 2, #ifdef CONFIG_USB_GADGET_OMAP - .hmc_mode = 19, // 0:host(off) 1:dev|otg 2:disabled - // .hmc_mode = 21, // 0:host(off) 1:dev(loopback) 2:host(loopback) + .hmc_mode = 19, /* 0:host(off) 1:dev|otg 2:disabled */ + /* .hmc_mode = 21,*/ /* 0:host(off) 1:dev(loopback) 2:host(loopback) */ #elif defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) /* needs OTG cable, or NONSTANDARD (B-to-MiniB) */ - .hmc_mode = 20, // 1:dev|otg(off) 1:host 2:disabled + .hmc_mode = 20, /* 1:dev|otg(off) 1:host 2:disabled */ #endif .pins[1] = 3, @@ -443,7 +443,7 @@ static void __init h2_init(void) omap_cfg_reg(M8_1610_FLASH_CS2B_WE); /* MMC: card detect and WP */ - // omap_cfg_reg(U19_ARMIO1); /* CD */ + /* omap_cfg_reg(U19_ARMIO1); */ /* CD */ omap_cfg_reg(BALLOUT_V8_ARMIO3); /* WP */ /* Irda */ diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c index c4a7141bb78..67ae5035a7e 100644 --- a/arch/arm/mach-omap1/board-h3.c +++ b/arch/arm/mach-omap1/board-h3.c @@ -388,18 +388,18 @@ static struct omap_mcbsp_reg_cfg mcbsp_regs = { .srgr2 = GSYNC | CLKSP | FSGM | FPER(31), .pcr0 = CLKRM | SCLKME | FSXP | FSRP | CLKXP | CLKRP, - //.pcr0 = CLKXP | CLKRP, /* mcbsp: slave */ + /*.pcr0 = CLKXP | CLKRP,*/ /* mcbsp: slave */ }; static struct omap_alsa_codec_config alsa_config = { .name = "H3 TSC2101", .mcbsp_regs_alsa = &mcbsp_regs, - .codec_configure_dev = NULL, // tsc2101_configure, - .codec_set_samplerate = NULL, // tsc2101_set_samplerate, - .codec_clock_setup = NULL, // tsc2101_clock_setup, - .codec_clock_on = NULL, // tsc2101_clock_on, - .codec_clock_off = NULL, // tsc2101_clock_off, - .get_default_samplerate = NULL, // tsc2101_get_default_samplerate, + .codec_configure_dev = NULL, /* tsc2101_configure, */ + .codec_set_samplerate = NULL, /* tsc2101_set_samplerate, */ + .codec_clock_setup = NULL, /* tsc2101_clock_setup, */ + .codec_clock_on = NULL, /* tsc2101_clock_on, */ + .codec_clock_off = NULL, /* tsc2101_clock_off, */ + .get_default_samplerate = NULL, /* tsc2101_get_default_samplerate, */ }; static struct platform_device h3_mcbsp1_device = { diff --git a/arch/arm/mach-omap1/board-innovator.c b/arch/arm/mach-omap1/board-innovator.c index 7d2d8af155a..92c14d364b5 100644 --- a/arch/arm/mach-omap1/board-innovator.c +++ b/arch/arm/mach-omap1/board-innovator.c @@ -134,12 +134,12 @@ static struct omap_mcbsp_reg_cfg mcbsp_regs = { static struct omap_alsa_codec_config alsa_config = { .name = "OMAP Innovator AIC23", .mcbsp_regs_alsa = &mcbsp_regs, - .codec_configure_dev = NULL, // aic23_configure, - .codec_set_samplerate = NULL, // aic23_set_samplerate, - .codec_clock_setup = NULL, // aic23_clock_setup, - .codec_clock_on = NULL, // aic23_clock_on, - .codec_clock_off = NULL, // aic23_clock_off, - .get_default_samplerate = NULL, // aic23_get_default_samplerate, + .codec_configure_dev = NULL, /* aic23_configure, */ + .codec_set_samplerate = NULL, /* aic23_set_samplerate, */ + .codec_clock_setup = NULL, /* aic23_clock_setup, */ + .codec_clock_on = NULL, /* aic23_clock_on, */ + .codec_clock_off = NULL, /* aic23_clock_off, */ + .get_default_samplerate = NULL, /* aic23_get_default_samplerate, */ }; static struct platform_device innovator_mcbsp1_device = { @@ -345,11 +345,11 @@ static struct omap_usb_config h2_usb_config __initdata = { .otg = 2, #ifdef CONFIG_USB_GADGET_OMAP - .hmc_mode = 19, // 0:host(off) 1:dev|otg 2:disabled - // .hmc_mode = 21, // 0:host(off) 1:dev(loopback) 2:host(loopback) + .hmc_mode = 19, /* 0:host(off) 1:dev|otg 2:disabled */ + /* .hmc_mode = 21,*/ /* 0:host(off) 1:dev(loopback) 2:host(loopback) */ #elif defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) /* NONSTANDARD CABLE NEEDED (B-to-Mini-B) */ - .hmc_mode = 20, // 1:dev|otg(off) 1:host 2:disabled + .hmc_mode = 20, /* 1:dev|otg(off) 1:host 2:disabled */ #endif .pins[1] = 3, diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c index 84333440008..e1f813d4417 100644 --- a/arch/arm/mach-omap1/board-osk.c +++ b/arch/arm/mach-omap1/board-osk.c @@ -160,12 +160,12 @@ static struct omap_mcbsp_reg_cfg mcbsp_regs = { static struct omap_alsa_codec_config alsa_config = { .name = "OSK AIC23", .mcbsp_regs_alsa = &mcbsp_regs, - .codec_configure_dev = NULL, // aic23_configure, - .codec_set_samplerate = NULL, // aic23_set_samplerate, - .codec_clock_setup = NULL, // aic23_clock_setup, - .codec_clock_on = NULL, // aic23_clock_on, - .codec_clock_off = NULL, // aic23_clock_off, - .get_default_samplerate = NULL, // aic23_get_default_samplerate, + .codec_configure_dev = NULL, /* aic23_configure, */ + .codec_set_samplerate = NULL, /* aic23_set_samplerate, */ + .codec_clock_setup = NULL, /* aic23_clock_setup, */ + .codec_clock_on = NULL, /* aic23_clock_on, */ + .codec_clock_off = NULL, /* aic23_clock_off, */ + .get_default_samplerate = NULL, /* aic23_get_default_samplerate, */ }; static struct platform_device osk5912_mcbsp1_device = { @@ -392,7 +392,7 @@ static void __init osk_mistral_init(void) omap_cfg_reg(W13_1610_CCP_CLKM); omap_cfg_reg(Y12_1610_CCP_CLKP); /* CCP_DATAM CONFLICTS WITH UART1.TX (and serial console) */ - // omap_cfg_reg(Y14_1610_CCP_DATAM); + /* omap_cfg_reg(Y14_1610_CCP_DATAM); */ omap_cfg_reg(W14_1610_CCP_DATAP); /* CAM_PWDN */ @@ -404,8 +404,8 @@ static void __init osk_mistral_init(void) pr_debug("OSK+Mistral: CAM_PWDN is awol\n"); - // omap_cfg_reg(P19_1610_GPIO6); // BUSY - omap_cfg_reg(P20_1610_GPIO4); // PENIRQ + /* omap_cfg_reg(P19_1610_GPIO6); */ /* BUSY */ + omap_cfg_reg(P20_1610_GPIO4); /* PENIRQ */ set_irq_type(OMAP_GPIO_IRQ(4), IRQT_FALLING); spi_register_board_info(mistral_boardinfo, ARRAY_SIZE(mistral_boardinfo)); diff --git a/arch/arm/mach-omap1/board-palmtt.c b/arch/arm/mach-omap1/board-palmtt.c index ed7094a7006..772daed493c 100644 --- a/arch/arm/mach-omap1/board-palmtt.c +++ b/arch/arm/mach-omap1/board-palmtt.c @@ -144,12 +144,12 @@ static struct omap_mcbsp_reg_cfg mcbsp_regs = { static struct omap_alsa_codec_config alsa_config = { .name = "PalmTT AIC23", .mcbsp_regs_alsa = &mcbsp_regs, - .codec_configure_dev = NULL, // aic23_configure, - .codec_set_samplerate = NULL, // aic23_set_samplerate, - .codec_clock_setup = NULL, // aic23_clock_setup, - .codec_clock_on = NULL, // aic23_clock_on, - .codec_clock_off = NULL, // aic23_clock_off, - .get_default_samplerate = NULL, // aic23_get_default_samplerate, + .codec_configure_dev = NULL, /* aic23_configure, */ + .codec_set_samplerate = NULL, /* aic23_set_samplerate, */ + .codec_clock_setup = NULL, /* aic23_clock_setup, */ + .codec_clock_on = NULL, /* aic23_clock_on, */ + .codec_clock_off = NULL, /* aic23_clock_off, */ + .get_default_samplerate = NULL, /* aic23_get_default_samplerate, */ }; static struct platform_device palmtt_mcbsp1_device = { diff --git a/arch/arm/mach-omap1/clock.c b/arch/arm/mach-omap1/clock.c index 5d9faa68d2e..4ea2933f887 100644 --- a/arch/arm/mach-omap1/clock.c +++ b/arch/arm/mach-omap1/clock.c @@ -1,4 +1,3 @@ -//kernel/linux-omap-fsample/arch/arm/mach-omap1/clock.c#2 - edit change 3808 (text) /* * linux/arch/arm/mach-omap1/clock.c * @@ -650,9 +649,9 @@ static void __init omap1_clk_disable_unused(struct clk *clk) /* FIXME: This clock seems to be necessary but no-one * has asked for its activation. */ - if (clk == &tc2_ck // FIX: pm.c (SRAM), CCP, Camera - || clk == &ck_dpll1out.clk // FIX: SoSSI, SSR - || clk == &arm_gpio_ck // FIX: GPIO code for 1510 + if (clk == &tc2_ck /* FIX: pm.c (SRAM), CCP, Camera */ + || clk == &ck_dpll1out.clk /* FIX: SoSSI, SSR */ + || clk == &arm_gpio_ck /* FIX: GPIO code for 1510 */ ) { printk(KERN_INFO "FIXME: Clock \"%s\" seems unused\n", clk->name); diff --git a/arch/arm/mach-omap1/leds-osk.c b/arch/arm/mach-omap1/leds-osk.c index 6939d5e7569..026685ed461 100644 --- a/arch/arm/mach-omap1/leds-osk.c +++ b/arch/arm/mach-omap1/leds-osk.c @@ -82,7 +82,7 @@ static void mistral_setled(void) red = 1; else if (hw_led_state & IDLE_LED) green = 1; - // else both sides are disabled + /* else both sides are disabled */ omap_set_gpio_dataout(GPIO_LED_GREEN, green); omap_set_gpio_dataout(GPIO_LED_RED, red); @@ -112,7 +112,7 @@ void osk_leds_event(led_event_t evt) case led_stop: led_state &= ~LED_STATE_ENABLED; hw_led_state = 0; - // NOTE: work may still be pending!! + /* NOTE: work may still be pending!! */ break; case led_claim: -- cgit v1.2.3-70-g09d2 From 138ab9f8321f67c71984ca43222efa71b0a0a0a9 Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Tue, 27 Nov 2007 00:01:45 -0400 Subject: ARM: OMAP1: Make omap1 use MMC multislot structures Make omap1 use new MMC multislot structures. The related MMC patches will be sent separately. Signed-off-by: Felipe Balbi Signed-off-by: Anderson Briglia Signed-off-by: Carlos Eduardo Aguiar Signed-off-by: David Cohen Signed-off-by: Eduardo Valentin Signed-off-by: Tony Lindgren --- arch/arm/configs/omap_h2_1610_defconfig | 60 +++++++++++++++- arch/arm/mach-omap1/Makefile | 4 +- arch/arm/mach-omap1/board-h2-mmc.c | 110 ++++++++++++++++++++++++++++ arch/arm/mach-omap1/board-h2.c | 10 +-- arch/arm/mach-omap1/board-h3-mmc.c | 114 ++++++++++++++++++++++++++++++ arch/arm/mach-omap1/board-h3.c | 22 ++++-- include/asm-arm/arch-omap/board-apollon.h | 2 + include/asm-arm/arch-omap/board-h2.h | 3 + include/asm-arm/arch-omap/board-h3.h | 2 + 9 files changed, 313 insertions(+), 14 deletions(-) create mode 100644 arch/arm/mach-omap1/board-h2-mmc.c create mode 100644 arch/arm/mach-omap1/board-h3-mmc.c (limited to 'arch') diff --git a/arch/arm/configs/omap_h2_1610_defconfig b/arch/arm/configs/omap_h2_1610_defconfig index b8a78ab49cd..64aa431f851 100644 --- a/arch/arm/configs/omap_h2_1610_defconfig +++ b/arch/arm/configs/omap_h2_1610_defconfig @@ -74,12 +74,20 @@ CONFIG_SLAB=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 + +# +# Loadable module support +# CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set # CONFIG_KMOD is not set + +# +# Block layer +# CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set @@ -358,8 +366,20 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set + +# +# DCCP Configuration (EXPERIMENTAL) +# # CONFIG_IP_DCCP is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# # CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -408,6 +428,10 @@ CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set # CONFIG_SYS_HYPERVISOR is not set + +# +# Connector - unified userspace <-> kernelspace linker +# # CONFIG_CONNECTOR is not set # CONFIG_MTD is not set # CONFIG_PARPORT is not set @@ -463,7 +487,15 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_SCSI_DEBUG is not set # CONFIG_ATA is not set + +# +# Multi-device support (RAID and LVM) +# # CONFIG_MD is not set + +# +# Network device support +# CONFIG_NETDEVICES=y # CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set @@ -472,6 +504,10 @@ CONFIG_NETDEVICES=y # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set # CONFIG_PHYLIB is not set + +# +# Ethernet (10 or 100Mbit) +# CONFIG_NET_ETHERNET=y CONFIG_MII=y # CONFIG_AX88796 is not set @@ -480,6 +516,10 @@ CONFIG_SMC91X=y CONFIG_NETDEV_1000=y CONFIG_NETDEV_10000=y +# +# Token Ring devices +# + # # Wireless LAN # @@ -505,6 +545,10 @@ CONFIG_SLHC=y # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set + +# +# ISDN subsystem +# # CONFIG_ISDN is not set # @@ -541,6 +585,7 @@ CONFIG_INPUT_MISC=y # CONFIG_INPUT_POWERMATE is not set # CONFIG_INPUT_YEALINK is not set CONFIG_INPUT_UINPUT=y +# CONFIG_INPUT_POLLDEV is not set # # Hardware I/O ports @@ -575,6 +620,10 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_UNIX98_PTYS=y # CONFIG_LEGACY_PTYS is not set + +# +# IPMI +# # CONFIG_IPMI_HANDLER is not set CONFIG_WATCHDOG=y CONFIG_WATCHDOG_NOWAYOUT=y @@ -588,6 +637,10 @@ CONFIG_WATCHDOG_NOWAYOUT=y # CONFIG_NVRAM is not set # CONFIG_R3964 is not set # CONFIG_RAW_DRIVER is not set + +# +# TPM devices +# # CONFIG_TCG_TPM is not set # CONFIG_I2C is not set @@ -771,8 +824,9 @@ CONFIG_DNOTIFY=y # CONFIG_FAT_FS=y CONFIG_MSDOS_FS=y -# CONFIG_VFAT_FS is not set +CONFIG_VFAT_FS=y CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" # CONFIG_NTFS_FS is not set # @@ -838,7 +892,7 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_NLS=y CONFIG_NLS_DEFAULT="iso8859-1" -# CONFIG_NLS_CODEPAGE_437 is not set +CONFIG_NLS_CODEPAGE_437=y # CONFIG_NLS_CODEPAGE_737 is not set # CONFIG_NLS_CODEPAGE_775 is not set # CONFIG_NLS_CODEPAGE_850 is not set @@ -862,7 +916,7 @@ CONFIG_NLS_DEFAULT="iso8859-1" # CONFIG_NLS_CODEPAGE_1250 is not set # CONFIG_NLS_CODEPAGE_1251 is not set # CONFIG_NLS_ASCII is not set -# CONFIG_NLS_ISO8859_1 is not set +CONFIG_NLS_ISO8859_1=y # CONFIG_NLS_ISO8859_2 is not set # CONFIG_NLS_ISO8859_3 is not set # CONFIG_NLS_ISO8859_4 is not set diff --git a/arch/arm/mach-omap1/Makefile b/arch/arm/mach-omap1/Makefile index 391b6f4827f..416a778611b 100644 --- a/arch/arm/mach-omap1/Makefile +++ b/arch/arm/mach-omap1/Makefile @@ -13,13 +13,13 @@ obj-$(CONFIG_PM) += pm.o sleep.o led-y := leds.o # Specific board support -obj-$(CONFIG_MACH_OMAP_H2) += board-h2.o +obj-$(CONFIG_MACH_OMAP_H2) += board-h2.o board-h2-mmc.o obj-$(CONFIG_MACH_OMAP_INNOVATOR) += board-innovator.o obj-$(CONFIG_MACH_OMAP_GENERIC) += board-generic.o obj-$(CONFIG_MACH_OMAP_PERSEUS2) += board-perseus2.o obj-$(CONFIG_MACH_OMAP_FSAMPLE) += board-fsample.o obj-$(CONFIG_MACH_OMAP_OSK) += board-osk.o -obj-$(CONFIG_MACH_OMAP_H3) += board-h3.o +obj-$(CONFIG_MACH_OMAP_H3) += board-h3.o board-h3-mmc.o obj-$(CONFIG_MACH_VOICEBLUE) += board-voiceblue.o obj-$(CONFIG_MACH_OMAP_PALMTE) += board-palmte.o obj-$(CONFIG_MACH_OMAP_PALMZ71) += board-palmz71.o diff --git a/arch/arm/mach-omap1/board-h2-mmc.c b/arch/arm/mach-omap1/board-h2-mmc.c new file mode 100644 index 00000000000..6fdc78406b2 --- /dev/null +++ b/arch/arm/mach-omap1/board-h2-mmc.c @@ -0,0 +1,110 @@ +/* + * linux/arch/arm/mach-omap1/board-h2-mmc.c + * + * Copyright (C) 2007 Instituto Nokia de Tecnologia - INdT + * Author: Felipe Balbi + * + * This code is based on linux/arch/arm/mach-omap2/board-n800-mmc.c, which is: + * Copyright (C) 2006 Nokia Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include + +#ifdef CONFIG_MMC_OMAP +static int slot_cover_open; +static struct device *mmc_device; + +static int h2_mmc_set_power(struct device *dev, int slot, int power_on, + int vdd) +{ +#ifdef CONFIG_MMC_DEBUG + dev_dbg(dev, "Set slot %d power: %s (vdd %d)\n", slot + 1, + power_on ? "on" : "off", vdd); +#endif + if (slot != 0) { + dev_err(dev, "No such slot %d\n", slot + 1); + return -ENODEV; + } + + return 0; +} + +static int h2_mmc_set_bus_mode(struct device *dev, int slot, int bus_mode) +{ +#ifdef CONFIG_MMC_DEBUG + dev_dbg(dev, "Set slot %d bus_mode %s\n", slot + 1, + bus_mode == MMC_BUSMODE_OPENDRAIN ? "open-drain" : "push-pull"); +#endif + if (slot != 0) { + dev_err(dev, "No such slot %d\n", slot + 1); + return -ENODEV; + } + + return 0; +} + +static int h2_mmc_get_cover_state(struct device *dev, int slot) +{ + BUG_ON(slot != 0); + + return slot_cover_open; +} + +void h2_mmc_slot_cover_handler(void *arg, int state) +{ + if (mmc_device == NULL) + return; + + slot_cover_open = state; + omap_mmc_notify_cover_event(mmc_device, 0, state); +} + +static int h2_mmc_late_init(struct device *dev) +{ + int ret = 0; + + mmc_device = dev; + + return ret; +} + +static void h2_mmc_cleanup(struct device *dev) +{ +} + +static struct omap_mmc_platform_data h2_mmc_data = { + .nr_slots = 1, + .switch_slot = NULL, + .init = h2_mmc_late_init, + .cleanup = h2_mmc_cleanup, + .slots[0] = { + .set_power = h2_mmc_set_power, + .set_bus_mode = h2_mmc_set_bus_mode, + .get_ro = NULL, + .get_cover_state = h2_mmc_get_cover_state, + .ocr_mask = MMC_VDD_28_29 | MMC_VDD_30_31 | + MMC_VDD_32_33 | MMC_VDD_33_34, + .name = "mmcblk", + }, +}; + +void __init h2_mmc_init(void) +{ + omap_set_mmc_info(1, &h2_mmc_data); +} + +#else + +void __init h2_mmc_init(void) +{ +} + +void h2_mmc_slot_cover_handler(void *arg, int state) +{ +} +#endif diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c index 18899d74d4c..ab6e68b0006 100644 --- a/arch/arm/mach-omap1/board-h2.c +++ b/arch/arm/mach-omap1/board-h2.c @@ -389,15 +389,14 @@ static struct omap_usb_config h2_usb_config __initdata = { }; static struct omap_mmc_config h2_mmc_config __initdata = { - .mmc [0] = { - .enabled = 1, + .mmc[0] = { + .enabled = 1, .wire4 = 1, - .wp_pin = OMAP_MPUIO(3), - .power_pin = -1, /* tps65010 gpio3 */ - .switch_pin = OMAP_MPUIO(1), }, }; +extern struct omap_mmc_platform_data h2_mmc_data; + static struct omap_uart_config h2_uart_config __initdata = { .enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)), }; @@ -459,6 +458,7 @@ static void __init h2_init(void) omap_board_config = h2_config; omap_board_config_size = ARRAY_SIZE(h2_config); omap_serial_init(); + h2_mmc_init(); /* irq for tps65010 chip */ omap_cfg_reg(W4_GPIO58); diff --git a/arch/arm/mach-omap1/board-h3-mmc.c b/arch/arm/mach-omap1/board-h3-mmc.c new file mode 100644 index 00000000000..66ecc437928 --- /dev/null +++ b/arch/arm/mach-omap1/board-h3-mmc.c @@ -0,0 +1,114 @@ +/* + * linux/arch/arm/mach-omap1/board-h3-mmc.c + * + * Copyright (C) 2007 Instituto Nokia de Tecnologia - INdT + * Author: Felipe Balbi + * + * This code is based on linux/arch/arm/mach-omap2/board-n800-mmc.c, which is: + * Copyright (C) 2006 Nokia Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include + +#ifdef CONFIG_MMC_OMAP +static int slot_cover_open; +static struct device *mmc_device; + +static int h3_mmc_set_power(struct device *dev, int slot, int power_on, + int vdd) +{ +#ifdef CONFIG_MMC_DEBUG + dev_dbg(dev, "Set slot %d power: %s (vdd %d)\n", slot + 1, + power_on ? "on" : "off", vdd); +#endif + if (slot != 0) { + dev_err(dev, "No such slot %d\n", slot + 1); + return -ENODEV; + } + + return 0; +} + +static int h3_mmc_set_bus_mode(struct device *dev, int slot, int bus_mode) +{ + int ret = 0; + +#ifdef CONFIG_MMC_DEBUG + dev_dbg(dev, "Set slot %d bus_mode %s\n", slot + 1, + bus_mode == MMC_BUSMODE_OPENDRAIN ? "open-drain" : "push-pull"); +#endif + if (slot != 0) { + dev_err(dev, "No such slot %d\n", slot + 1); + return -ENODEV; + } + + /* Treated on upper level */ + + return bus_mode; +} + +static int h3_mmc_get_cover_state(struct device *dev, int slot) +{ + BUG_ON(slot != 0); + + return slot_cover_open; +} + +void h3_mmc_slot_cover_handler(void *arg, int state) +{ + if (mmc_device == NULL) + return; + + slot_cover_open = state; + omap_mmc_notify_cover_event(mmc_device, 0, state); +} + +static int h3_mmc_late_init(struct device *dev) +{ + int ret = 0; + + mmc_device = dev; + + return ret; +} + +static void h3_mmc_cleanup(struct device *dev) +{ +} + +static struct omap_mmc_platform_data h3_mmc_data = { + .nr_slots = 1, + .switch_slot = NULL, + .init = h3_mmc_late_init, + .cleanup = h3_mmc_cleanup, + .slots[0] = { + .set_power = h3_mmc_set_power, + .set_bus_mode = h3_mmc_set_bus_mode, + .get_ro = NULL, + .get_cover_state = h3_mmc_get_cover_state, + .ocr_mask = MMC_VDD_28_29 | MMC_VDD_30_31 | + MMC_VDD_32_33 | MMC_VDD_33_34, + .name = "mmcblk", + }, +}; + +void __init h3_mmc_init(void) +{ + omap_set_mmc_info(1, &h3_mmc_data); +} + +#else + +void __init h3_mmc_init(void) +{ +} + +void h3_mmc_slot_cover_handler(void *arg, int state) +{ +} +#endif diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c index 67ae5035a7e..f28f05d6760 100644 --- a/arch/arm/mach-omap1/board-h3.c +++ b/arch/arm/mach-omap1/board-h3.c @@ -437,12 +437,13 @@ static struct omap_usb_config h3_usb_config __initdata = { static struct omap_mmc_config h3_mmc_config __initdata = { .mmc[0] = { - .enabled = 1, - .power_pin = -1, /* tps65010 GPIO4 */ - .switch_pin = OMAP_MPUIO(1), - }, + .enabled = 1, + .wire4 = 1, + }, }; +extern struct omap_mmc_platform_data h3_mmc_data; + static struct omap_uart_config h3_uart_config __initdata = { .enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)), }; @@ -471,6 +472,18 @@ static struct i2c_board_info __initdata h3_i2c_board_info[] = { */ }; +static struct omap_gpio_switch h3_gpio_switches[] __initdata = { + { + .name = "mmc_slot", + .gpio = OMAP_MPUIO(1), + .type = OMAP_GPIO_SWITCH_TYPE_COVER, + .debounce_rising = 100, + .debounce_falling = 0, + .notify = h3_mmc_slot_cover_handler, + .notify_data = NULL, + }, +}; + #define H3_NAND_RB_GPIO_PIN 10 static int nand_dev_ready(struct omap_nand_platform_data *data) @@ -504,6 +517,7 @@ static void __init h3_init(void) omap_board_config = h3_config; omap_board_config_size = ARRAY_SIZE(h3_config); omap_serial_init(); + h3_mmc_init(); /* FIXME setup irq for tps65013 chip */ i2c_register_board_info(1, h3_i2c_board_info, diff --git a/include/asm-arm/arch-omap/board-apollon.h b/include/asm-arm/arch-omap/board-apollon.h index dcb587b311f..547125a4695 100644 --- a/include/asm-arm/arch-omap/board-apollon.h +++ b/include/asm-arm/arch-omap/board-apollon.h @@ -29,6 +29,8 @@ #ifndef __ASM_ARCH_OMAP_APOLLON_H #define __ASM_ARCH_OMAP_APOLLON_H +extern void apollon_mmc_init(void); + /* Placeholder for APOLLON specific defines */ #define APOLLON_ETHR_GPIO_IRQ 74 diff --git a/include/asm-arm/arch-omap/board-h2.h b/include/asm-arm/arch-omap/board-h2.h index b2888ef9e9b..c322796d0d2 100644 --- a/include/asm-arm/arch-omap/board-h2.h +++ b/include/asm-arm/arch-omap/board-h2.h @@ -34,5 +34,8 @@ /* At OMAP1610 Innovator the Ethernet is directly connected to CS1 */ #define OMAP1610_ETHR_START 0x04000300 +extern void h2_mmc_init(void); +extern void h2_mmc_slot_cover_handler(void *arg, int state); + #endif /* __ASM_ARCH_OMAP_H2_H */ diff --git a/include/asm-arm/arch-omap/board-h3.h b/include/asm-arm/arch-omap/board-h3.h index 761ea0a1789..1c2b55c61ca 100644 --- a/include/asm-arm/arch-omap/board-h3.h +++ b/include/asm-arm/arch-omap/board-h3.h @@ -36,5 +36,7 @@ #define NR_IRQS (MAXIRQNUM + 1) +extern void __init h3_mmc_init(void); +extern void h3_mmc_slot_cover_handler(void *arg, int state); #endif /* __ASM_ARCH_OMAP_H3_H */ -- cgit v1.2.3-70-g09d2 From 087c50302fbd608118e7c0f27a95dc552ad2f53b Mon Sep 17 00:00:00 2001 From: Carlos Eduardo Aguiar Date: Fri, 30 Nov 2007 01:52:53 -0400 Subject: ARM: OMAP1: Use MMC multislot structures for Siemens SX1 board Use MMC multislot structures for Siemens SX1 board Signed-off-by: Carlos Eduardo Aguiar Signed-off-by: Tony Lindgren --- arch/arm/mach-omap1/Makefile | 2 +- arch/arm/mach-omap1/board-sx1-mmc.c | 124 ++++++++++++++++++++++++++++++++++ arch/arm/mach-omap1/board-sx1.c | 39 ++++------- include/asm-arm/arch-omap/board-sx1.h | 8 ++- 4 files changed, 146 insertions(+), 27 deletions(-) create mode 100644 arch/arm/mach-omap1/board-sx1-mmc.c (limited to 'arch') diff --git a/arch/arm/mach-omap1/Makefile b/arch/arm/mach-omap1/Makefile index 416a778611b..015a66b3ca8 100644 --- a/arch/arm/mach-omap1/Makefile +++ b/arch/arm/mach-omap1/Makefile @@ -26,7 +26,7 @@ obj-$(CONFIG_MACH_OMAP_PALMZ71) += board-palmz71.o obj-$(CONFIG_MACH_OMAP_PALMTT) += board-palmtt.o obj-$(CONFIG_MACH_NOKIA770) += board-nokia770.o obj-$(CONFIG_MACH_AMS_DELTA) += board-ams-delta.o -obj-$(CONFIG_MACH_SX1) += board-sx1.o +obj-$(CONFIG_MACH_SX1) += board-sx1.o board-sx1-mmc.o ifeq ($(CONFIG_ARCH_OMAP15XX),y) # Innovator-1510 FPGA diff --git a/arch/arm/mach-omap1/board-sx1-mmc.c b/arch/arm/mach-omap1/board-sx1-mmc.c new file mode 100644 index 00000000000..8c93d47719e --- /dev/null +++ b/arch/arm/mach-omap1/board-sx1-mmc.c @@ -0,0 +1,124 @@ +/* + * linux/arch/arm/mach-omap1/board-sx1-mmc.c + * + * Copyright (C) 2007 Instituto Nokia de Tecnologia - INdT + * Author: Carlos Eduardo Aguiar + * + * This code is based on linux/arch/arm/mach-omap1/board-h2-mmc.c, which is: + * Copyright (C) 2007 Instituto Nokia de Tecnologia - INdT + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include + +#ifdef CONFIG_MMC_OMAP +static int slot_cover_open; +static struct device *mmc_device; + +static int sx1_mmc_set_power(struct device *dev, int slot, int power_on, + int vdd) +{ + int err; + u8 dat = 0; + +#ifdef CONFIG_MMC_DEBUG + dev_dbg(dev, "Set slot %d power: %s (vdd %d)\n", slot + 1, + power_on ? "on" : "off", vdd); +#endif + + if (slot != 0) { + dev_err(dev, "No such slot %d\n", slot + 1); + return -ENODEV; + } + + err = sx1_i2c_read_byte(SOFIA_I2C_ADDR, SOFIA_POWER1_REG, &dat); + if (err < 0) + return err; + + if (power_on) + dat |= SOFIA_MMC_POWER; + else + dat &= ~SOFIA_MMC_POWER; + + return sx1_i2c_write_byte(SOFIA_I2C_ADDR, SOFIA_POWER1_REG, dat); +} + +static int sx1_mmc_set_bus_mode(struct device *dev, int slot, int bus_mode) +{ +#ifdef CONFIG_MMC_DEBUG + dev_dbg(dev, "Set slot %d bus_mode %s\n", slot + 1, + bus_mode == MMC_BUSMODE_OPENDRAIN ? "open-drain" : "push-pull"); +#endif + if (slot != 0) { + dev_err(dev, "No such slot %d\n", slot + 1); + return -ENODEV; + } + + return 0; +} + +static int sx1_mmc_get_cover_state(struct device *dev, int slot) +{ + BUG_ON(slot != 0); + + return slot_cover_open; +} + +void sx1_mmc_slot_cover_handler(void *arg, int state) +{ + if (mmc_device == NULL) + return; + + slot_cover_open = state; + omap_mmc_notify_cover_event(mmc_device, 0, state); +} + +static int sx1_mmc_late_init(struct device *dev) +{ + int ret = 0; + + mmc_device = dev; + + return ret; +} + +static void sx1_mmc_cleanup(struct device *dev) +{ +} + +static struct omap_mmc_platform_data sx1_mmc_data = { + .nr_slots = 1, + .switch_slot = NULL, + .init = sx1_mmc_late_init, + .cleanup = sx1_mmc_cleanup, + .slots[0] = { + .set_power = sx1_mmc_set_power, + .set_bus_mode = sx1_mmc_set_bus_mode, + .get_ro = NULL, + .get_cover_state = sx1_mmc_get_cover_state, + .ocr_mask = MMC_VDD_28_29 | MMC_VDD_30_31 | + MMC_VDD_32_33 | MMC_VDD_33_34, + .name = "mmcblk", + }, +}; + +void __init sx1_mmc_init(void) +{ + omap_set_mmc_info(1, &sx1_mmc_data); +} + +#else + +void __init sx1_mmc_init(void) +{ +} + +void sx1_mmc_slot_cover_handler(void *arg, int state) +{ +} +#endif diff --git a/arch/arm/mach-omap1/board-sx1.c b/arch/arm/mach-omap1/board-sx1.c index 2743d639aa0..be3ecd8c890 100644 --- a/arch/arm/mach-omap1/board-sx1.c +++ b/arch/arm/mach-omap1/board-sx1.c @@ -44,7 +44,7 @@ #include /* Write to I2C device */ -int i2c_write_byte(u8 devaddr, u8 regoffset, u8 value) +int sx1_i2c_write_byte(u8 devaddr, u8 regoffset, u8 value) { struct i2c_adapter *adap; int err; @@ -67,7 +67,7 @@ int i2c_write_byte(u8 devaddr, u8 regoffset, u8 value) } /* Read from I2C device */ -int i2c_read_byte(u8 devaddr, u8 regoffset, u8 * value) +int sx1_i2c_read_byte(u8 devaddr, u8 regoffset, u8 *value) { struct i2c_adapter *adap; int err; @@ -101,66 +101,55 @@ int sx1_setkeylight(u8 keylight) { if (keylight > SOFIA_MAX_LIGHT_VAL) keylight = SOFIA_MAX_LIGHT_VAL; - return i2c_write_byte(SOFIA_I2C_ADDR, SOFIA_KEYLIGHT_REG, keylight); + return sx1_i2c_write_byte(SOFIA_I2C_ADDR, SOFIA_KEYLIGHT_REG, keylight); } /* get current keylight intensity */ int sx1_getkeylight(u8 * keylight) { - return i2c_read_byte(SOFIA_I2C_ADDR, SOFIA_KEYLIGHT_REG, keylight); + return sx1_i2c_read_byte(SOFIA_I2C_ADDR, SOFIA_KEYLIGHT_REG, keylight); } /* set LCD backlight intensity */ int sx1_setbacklight(u8 backlight) { if (backlight > SOFIA_MAX_LIGHT_VAL) backlight = SOFIA_MAX_LIGHT_VAL; - return i2c_write_byte(SOFIA_I2C_ADDR, SOFIA_BACKLIGHT_REG, backlight); + return sx1_i2c_write_byte(SOFIA_I2C_ADDR, SOFIA_BACKLIGHT_REG, + backlight); } /* get current LCD backlight intensity */ int sx1_getbacklight (u8 * backlight) { - return i2c_read_byte(SOFIA_I2C_ADDR, SOFIA_BACKLIGHT_REG, backlight); + return sx1_i2c_read_byte(SOFIA_I2C_ADDR, SOFIA_BACKLIGHT_REG, + backlight); } /* set LCD backlight power on/off */ int sx1_setmmipower(u8 onoff) { int err; u8 dat = 0; - err = i2c_read_byte(SOFIA_I2C_ADDR, SOFIA_POWER1_REG, &dat); + err = sx1_i2c_read_byte(SOFIA_I2C_ADDR, SOFIA_POWER1_REG, &dat); if (err < 0) return err; if (onoff) dat |= SOFIA_MMILIGHT_POWER; else dat &= ~SOFIA_MMILIGHT_POWER; - return i2c_write_byte(SOFIA_I2C_ADDR, SOFIA_POWER1_REG, dat); -} -/* set MMC power on/off */ -int sx1_setmmcpower(u8 onoff) -{ - int err; - u8 dat = 0; - err = i2c_read_byte(SOFIA_I2C_ADDR, SOFIA_POWER1_REG, &dat); - if (err < 0) - return err; - if (onoff) - dat |= SOFIA_MMC_POWER; - else - dat &= ~SOFIA_MMC_POWER; - return i2c_write_byte(SOFIA_I2C_ADDR, SOFIA_POWER1_REG, dat); + return sx1_i2c_write_byte(SOFIA_I2C_ADDR, SOFIA_POWER1_REG, dat); } + /* set USB power on/off */ int sx1_setusbpower(u8 onoff) { int err; u8 dat = 0; - err = i2c_read_byte(SOFIA_I2C_ADDR, SOFIA_POWER1_REG, &dat); + err = sx1_i2c_read_byte(SOFIA_I2C_ADDR, SOFIA_POWER1_REG, &dat); if (err < 0) return err; if (onoff) dat |= SOFIA_USB_POWER; else dat &= ~SOFIA_USB_POWER; - return i2c_write_byte(SOFIA_I2C_ADDR, SOFIA_POWER1_REG, dat); + return sx1_i2c_write_byte(SOFIA_I2C_ADDR, SOFIA_POWER1_REG, dat); } EXPORT_SYMBOL(sx1_setkeylight); @@ -168,7 +157,6 @@ EXPORT_SYMBOL(sx1_getkeylight); EXPORT_SYMBOL(sx1_setbacklight); EXPORT_SYMBOL(sx1_getbacklight); EXPORT_SYMBOL(sx1_setmmipower); -EXPORT_SYMBOL(sx1_setmmcpower); EXPORT_SYMBOL(sx1_setusbpower); /*----------- Keypad -------------------------*/ @@ -454,6 +442,7 @@ static void __init omap_sx1_init(void) omap_board_config = sx1_config; omap_board_config_size = ARRAY_SIZE(sx1_config); omap_serial_init(); + sx1_mmc_init(); /* turn on USB power */ /* sx1_setusbpower(1); cant do it here because i2c is not ready */ diff --git a/include/asm-arm/arch-omap/board-sx1.h b/include/asm-arm/arch-omap/board-sx1.h index 2bb8dd6e2d1..355adbdaae3 100644 --- a/include/asm-arm/arch-omap/board-sx1.h +++ b/include/asm-arm/arch-omap/board-sx1.h @@ -41,6 +41,12 @@ int sx1_getkeylight(u8 *keylight); int sx1_setmmipower(u8 onoff); int sx1_setusbpower(u8 onoff); -int sx1_setmmcpower(u8 onoff); +int sx1_i2c_read_byte(u8 devaddr, u8 regoffset, u8 *value); +int sx1_i2c_write_byte(u8 devaddr, u8 regoffset, u8 value); + +/* MMC prototypes */ + +extern void sx1_mmc_init(void); +extern void sx1_mmc_slot_cover_handler(void *arg, int state); #endif /* __ASM_ARCH_SX1_I2C_CHIPS_H */ -- cgit v1.2.3-70-g09d2 From 010bb0cf42fe2fa0a00753e0c11a3e8bfefb37a3 Mon Sep 17 00:00:00 2001 From: Vivek Kutal Date: Tue, 11 Dec 2007 21:46:31 +0530 Subject: ARM: OMAP1: PM fixes for OMAP1 This patch does the following: - Fixes the omap_pm_idle() code so that we enter WFI mode in idle. - /sys/power/sleep_while_idle is created only when 32k timer is used Signed-off-by: Vivek Kutal Signed-off-by: Tony Lindgren --- arch/arm/mach-omap1/pm.c | 17 ++++++++++++----- 1 file changed, 12 insertions(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap1/pm.c b/arch/arm/mach-omap1/pm.c index 06b7e54a012..64adb24ffb7 100644 --- a/arch/arm/mach-omap1/pm.c +++ b/arch/arm/mach-omap1/pm.c @@ -67,6 +67,8 @@ static unsigned int mpui730_sleep_save[MPUI730_SLEEP_SAVE_SIZE]; static unsigned int mpui1510_sleep_save[MPUI1510_SLEEP_SAVE_SIZE]; static unsigned int mpui1610_sleep_save[MPUI1610_SLEEP_SAVE_SIZE]; +#ifdef CONFIG_OMAP_32K_TIMER + static unsigned short enable_dyn_sleep = 1; static ssize_t idle_show(struct kobject *kobj, struct kobj_attribute *attr, @@ -91,6 +93,8 @@ static ssize_t idle_store(struct kobject *kobj, struct kobj_attribute *attr, static struct kobj_attribute sleep_while_idle_attr = __ATTR(sleep_while_idle, 0644, idle_show, idle_store); +#endif + static void (*omap_sram_idle)(void) = NULL; static void (*omap_sram_suspend)(unsigned long r0, unsigned long r1) = NULL; @@ -104,9 +108,7 @@ void omap_pm_idle(void) { extern __u32 arm_idlect1_mask; __u32 use_idlect1 = arm_idlect1_mask; -#ifndef CONFIG_OMAP_MPU_TIMER - int do_sleep; -#endif + int do_sleep = 0; local_irq_disable(); local_fiq_disable(); @@ -128,7 +130,6 @@ void omap_pm_idle(void) use_idlect1 = use_idlect1 & ~(1 << 9); #else - do_sleep = 0; while (enable_dyn_sleep) { #ifdef CONFIG_CBUS_TAHVO_USB @@ -141,6 +142,8 @@ void omap_pm_idle(void) break; } +#endif + #ifdef CONFIG_OMAP_DM_TIMER use_idlect1 = omap_dm_timer_modify_idlect_mask(use_idlect1); #endif @@ -168,7 +171,6 @@ void omap_pm_idle(void) } omap_sram_suspend(omap_readl(ARM_IDLECT1), omap_readl(ARM_IDLECT2)); -#endif local_fiq_enable(); local_irq_enable(); @@ -661,7 +663,10 @@ static struct platform_suspend_ops omap_pm_ops ={ static int __init omap_pm_init(void) { + +#ifdef CONFIG_OMAP_32K_TIMER int error; +#endif printk("Power Management for TI OMAP.\n"); @@ -719,9 +724,11 @@ static int __init omap_pm_init(void) omap_pm_init_proc(); #endif +#ifdef CONFIG_OMAP_32K_TIMER error = sysfs_create_file(power_kobj, &sleep_while_idle_attr); if (error) printk(KERN_ERR "sysfs_create_file failed: %d\n", error); +#endif if (cpu_is_omap16xx()) { /* configure LOW_PWR pin */ -- cgit v1.2.3-70-g09d2 From feb72f3b313e1f068b707773e9231af4f87d9580 Mon Sep 17 00:00:00 2001 From: Vivek Kutal Date: Mon, 17 Dec 2007 01:56:33 -0800 Subject: ARM: OMAP1: Remove omap_sram_idle() This patch removes omap_sram_idle() that is no longer used. The function called in pm_idle is omap_sram_suspend, omap_sram_idle() is not used anywhere in omap1. Signed-off-by: Vivek Kutal Signed-off-by: Tony Lindgren --- arch/arm/mach-omap1/pm.c | 9 +-- arch/arm/mach-omap1/sleep.S | 161 -------------------------------------------- 2 files changed, 1 insertion(+), 169 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap1/pm.c b/arch/arm/mach-omap1/pm.c index 64adb24ffb7..1a2a3715857 100644 --- a/arch/arm/mach-omap1/pm.c +++ b/arch/arm/mach-omap1/pm.c @@ -95,7 +95,6 @@ static struct kobj_attribute sleep_while_idle_attr = #endif -static void (*omap_sram_idle)(void) = NULL; static void (*omap_sram_suspend)(unsigned long r0, unsigned long r1) = NULL; /* @@ -676,23 +675,17 @@ static int __init omap_pm_init(void) * memory the MPU can see when it wakes up. */ if (cpu_is_omap730()) { - omap_sram_idle = omap_sram_push(omap730_idle_loop_suspend, - omap730_idle_loop_suspend_sz); omap_sram_suspend = omap_sram_push(omap730_cpu_suspend, omap730_cpu_suspend_sz); } else if (cpu_is_omap15xx()) { - omap_sram_idle = omap_sram_push(omap1510_idle_loop_suspend, - omap1510_idle_loop_suspend_sz); omap_sram_suspend = omap_sram_push(omap1510_cpu_suspend, omap1510_cpu_suspend_sz); } else if (cpu_is_omap16xx()) { - omap_sram_idle = omap_sram_push(omap1610_idle_loop_suspend, - omap1610_idle_loop_suspend_sz); omap_sram_suspend = omap_sram_push(omap1610_cpu_suspend, omap1610_cpu_suspend_sz); } - if (omap_sram_idle == NULL || omap_sram_suspend == NULL) { + if (omap_sram_suspend == NULL) { printk(KERN_ERR "PM not initialized: Missing SRAM support\n"); return -ENODEV; } diff --git a/arch/arm/mach-omap1/sleep.S b/arch/arm/mach-omap1/sleep.S index abef33d10f0..68f5b39030b 100644 --- a/arch/arm/mach-omap1/sleep.S +++ b/arch/arm/mach-omap1/sleep.S @@ -39,167 +39,6 @@ .text -/* - * Forces OMAP into idle state - * - * omapXXXX_idle_loop_suspend() - * - * Note: This code get's copied to internal SRAM at boot. When the OMAP - * wakes up it continues execution at the point it went to sleep. - * - * Note: Because of slightly different configuration values we have - * processor specific functions here. - */ - -#if defined(CONFIG_ARCH_OMAP730) -ENTRY(omap730_idle_loop_suspend) - - stmfd sp!, {r0 - r12, lr} @ save registers on stack - - @ load base address of ARM_IDLECT1 and ARM_IDLECT2 - mov r4, #CLKGEN_REG_ASM_BASE & 0xff000000 - orr r4, r4, #CLKGEN_REG_ASM_BASE & 0x00ff0000 - orr r4, r4, #CLKGEN_REG_ASM_BASE & 0x0000ff00 - - @ turn off clock domains - @ get ARM_IDLECT2 into r2 - ldrh r2, [r4, #ARM_IDLECT2_ASM_OFFSET & 0xff] - mov r5, #OMAP730_IDLECT2_SLEEP_VAL & 0xff - orr r5, r5, #OMAP730_IDLECT2_SLEEP_VAL & 0xff00 - strh r5, [r4, #ARM_IDLECT2_ASM_OFFSET & 0xff] - - @ request ARM idle - @ get ARM_IDLECT1 into r1 - ldrh r1, [r4, #ARM_IDLECT1_ASM_OFFSET & 0xff] - orr r3, r1, #OMAP730_IDLE_LOOP_REQUEST & 0xffff - strh r3, [r4, #ARM_IDLECT1_ASM_OFFSET & 0xff] - - mov r5, #IDLE_WAIT_CYCLES & 0xff - orr r5, r5, #IDLE_WAIT_CYCLES & 0xff00 -l_730: subs r5, r5, #1 - bne l_730 -/* - * Let's wait for the next clock tick to wake us up. - */ - mov r0, #0 - mcr p15, 0, r0, c7, c0, 4 @ wait for interrupt -/* - * omap730_idle_loop_suspend()'s resume point. - * - * It will just start executing here, so we'll restore stuff from the - * stack, reset the ARM_IDLECT1 and ARM_IDLECT2. - */ - - @ restore ARM_IDLECT1 and ARM_IDLECT2 and return - @ r1 has ARM_IDLECT1 and r2 still has ARM_IDLECT2 - strh r2, [r4, #ARM_IDLECT2_ASM_OFFSET & 0xff] - strh r1, [r4, #ARM_IDLECT1_ASM_OFFSET & 0xff] - - ldmfd sp!, {r0 - r12, pc} @ restore regs and return - -ENTRY(omap730_idle_loop_suspend_sz) - .word . - omap730_idle_loop_suspend -#endif /* CONFIG_ARCH_OMAP730 */ - -#ifdef CONFIG_ARCH_OMAP15XX -ENTRY(omap1510_idle_loop_suspend) - - stmfd sp!, {r0 - r12, lr} @ save registers on stack - - @ load base address of ARM_IDLECT1 and ARM_IDLECT2 - mov r4, #CLKGEN_REG_ASM_BASE & 0xff000000 - orr r4, r4, #CLKGEN_REG_ASM_BASE & 0x00ff0000 - orr r4, r4, #CLKGEN_REG_ASM_BASE & 0x0000ff00 - - @ turn off clock domains - @ get ARM_IDLECT2 into r2 - ldrh r2, [r4, #ARM_IDLECT2_ASM_OFFSET & 0xff] - mov r5, #OMAP1510_IDLE_CLOCK_DOMAINS & 0xff - orr r5, r5, #OMAP1510_IDLE_CLOCK_DOMAINS & 0xff00 - strh r5, [r4, #ARM_IDLECT2_ASM_OFFSET & 0xff] - - @ request ARM idle - @ get ARM_IDLECT1 into r1 - ldrh r1, [r4, #ARM_IDLECT1_ASM_OFFSET & 0xff] - orr r3, r1, #OMAP1510_IDLE_LOOP_REQUEST & 0xffff - strh r3, [r4, #ARM_IDLECT1_ASM_OFFSET & 0xff] - - mov r5, #IDLE_WAIT_CYCLES & 0xff - orr r5, r5, #IDLE_WAIT_CYCLES & 0xff00 -l_1510: subs r5, r5, #1 - bne l_1510 -/* - * Let's wait for the next clock tick to wake us up. - */ - mov r0, #0 - mcr p15, 0, r0, c7, c0, 4 @ wait for interrupt -/* - * omap1510_idle_loop_suspend()'s resume point. - * - * It will just start executing here, so we'll restore stuff from the - * stack, reset the ARM_IDLECT1 and ARM_IDLECT2. - */ - - @ restore ARM_IDLECT1 and ARM_IDLECT2 and return - @ r1 has ARM_IDLECT1 and r2 still has ARM_IDLECT2 - strh r2, [r4, #ARM_IDLECT2_ASM_OFFSET & 0xff] - strh r1, [r4, #ARM_IDLECT1_ASM_OFFSET & 0xff] - - ldmfd sp!, {r0 - r12, pc} @ restore regs and return - -ENTRY(omap1510_idle_loop_suspend_sz) - .word . - omap1510_idle_loop_suspend -#endif /* CONFIG_ARCH_OMAP15XX */ - -#if defined(CONFIG_ARCH_OMAP16XX) -ENTRY(omap1610_idle_loop_suspend) - - stmfd sp!, {r0 - r12, lr} @ save registers on stack - - @ load base address of ARM_IDLECT1 and ARM_IDLECT2 - mov r4, #CLKGEN_REG_ASM_BASE & 0xff000000 - orr r4, r4, #CLKGEN_REG_ASM_BASE & 0x00ff0000 - orr r4, r4, #CLKGEN_REG_ASM_BASE & 0x0000ff00 - - @ turn off clock domains - @ get ARM_IDLECT2 into r2 - ldrh r2, [r4, #ARM_IDLECT2_ASM_OFFSET & 0xff] - mov r5, #OMAP1610_IDLECT2_SLEEP_VAL & 0xff - orr r5, r5, #OMAP1610_IDLECT2_SLEEP_VAL & 0xff00 - strh r5, [r4, #ARM_IDLECT2_ASM_OFFSET & 0xff] - - @ request ARM idle - @ get ARM_IDLECT1 into r1 - ldrh r1, [r4, #ARM_IDLECT1_ASM_OFFSET & 0xff] - orr r3, r1, #OMAP1610_IDLE_LOOP_REQUEST & 0xffff - strh r3, [r4, #ARM_IDLECT1_ASM_OFFSET & 0xff] - - mov r5, #IDLE_WAIT_CYCLES & 0xff - orr r5, r5, #IDLE_WAIT_CYCLES & 0xff00 -l_1610: subs r5, r5, #1 - bne l_1610 -/* - * Let's wait for the next clock tick to wake us up. - */ - mov r0, #0 - mcr p15, 0, r0, c7, c0, 4 @ wait for interrupt -/* - * omap1610_idle_loop_suspend()'s resume point. - * - * It will just start executing here, so we'll restore stuff from the - * stack, reset the ARM_IDLECT1 and ARM_IDLECT2. - */ - - @ restore ARM_IDLECT1 and ARM_IDLECT2 and return - @ r1 has ARM_IDLECT1 and r2 still has ARM_IDLECT2 - strh r2, [r4, #ARM_IDLECT2_ASM_OFFSET & 0xff] - strh r1, [r4, #ARM_IDLECT1_ASM_OFFSET & 0xff] - - ldmfd sp!, {r0 - r12, pc} @ restore regs and return - -ENTRY(omap1610_idle_loop_suspend_sz) - .word . - omap1610_idle_loop_suspend -#endif /* CONFIG_ARCH_OMAP16XX */ /* * Forces OMAP into deep sleep state -- cgit v1.2.3-70-g09d2 From 1ed16a86b47fd7dd9125fc8f6df482cc6edc9b20 Mon Sep 17 00:00:00 2001 From: Jarkko Nikula Date: Wed, 7 Nov 2007 06:54:32 +0200 Subject: ARM: OMAP1: Use I2C bus registration helper for omap1 This patch starts using introduced I2C bus registration helper by cleaning up registration currently done in various places and by doing necessary board file modifications. Signed-off-by: Jarkko Nikula Acked-by: David Brownell Signed-off-by: Tony Lindgren --- arch/arm/mach-omap1/board-ams-delta.c | 1 + arch/arm/mach-omap1/board-fsample.c | 1 + arch/arm/mach-omap1/board-generic.c | 1 + arch/arm/mach-omap1/board-h2.c | 7 ++----- arch/arm/mach-omap1/board-h3.c | 6 ++---- arch/arm/mach-omap1/board-innovator.c | 1 + arch/arm/mach-omap1/board-nokia770.c | 1 + arch/arm/mach-omap1/board-osk.c | 5 ++--- arch/arm/mach-omap1/board-palmte.c | 1 + arch/arm/mach-omap1/board-palmtt.c | 1 + arch/arm/mach-omap1/board-palmz71.c | 1 + arch/arm/mach-omap1/board-perseus2.c | 1 + arch/arm/mach-omap1/board-sx1.c | 1 + arch/arm/mach-omap1/board-voiceblue.c | 1 + 14 files changed, 17 insertions(+), 12 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c index 6aac72dc430..8b102ad59c1 100644 --- a/arch/arm/mach-omap1/board-ams-delta.c +++ b/arch/arm/mach-omap1/board-ams-delta.c @@ -227,6 +227,7 @@ static void __init ams_delta_init(void) omap_board_config = ams_delta_config; omap_board_config_size = ARRAY_SIZE(ams_delta_config); omap_serial_init(); + omap_register_i2c_bus(1, 100, NULL, 0); /* Clear latch2 (NAND, LCD, modem enable) */ ams_delta_latch2_write(~0, 0); diff --git a/arch/arm/mach-omap1/board-fsample.c b/arch/arm/mach-omap1/board-fsample.c index 4f4640ba2a9..1bdb66638e2 100644 --- a/arch/arm/mach-omap1/board-fsample.c +++ b/arch/arm/mach-omap1/board-fsample.c @@ -234,6 +234,7 @@ static void __init omap_fsample_init(void) omap_board_config = fsample_config; omap_board_config_size = ARRAY_SIZE(fsample_config); omap_serial_init(); + omap_register_i2c_bus(1, 100, NULL, 0); } static void __init fsample_init_smc91x(void) diff --git a/arch/arm/mach-omap1/board-generic.c b/arch/arm/mach-omap1/board-generic.c index 33d01adab1e..005bf0e3e1e 100644 --- a/arch/arm/mach-omap1/board-generic.c +++ b/arch/arm/mach-omap1/board-generic.c @@ -101,6 +101,7 @@ static void __init omap_generic_init(void) omap_board_config = generic_config; omap_board_config_size = ARRAY_SIZE(generic_config); omap_serial_init(); + omap_register_i2c_bus(1, 100, NULL, 0); } static void __init omap_generic_map_io(void) diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c index ab6e68b0006..00b7623b9b0 100644 --- a/arch/arm/mach-omap1/board-h2.c +++ b/arch/arm/mach-omap1/board-h2.c @@ -458,17 +458,14 @@ static void __init h2_init(void) omap_board_config = h2_config; omap_board_config_size = ARRAY_SIZE(h2_config); omap_serial_init(); + omap_register_i2c_bus(1, 100, h2_i2c_board_info, + ARRAY_SIZE(h2_i2c_board_info)); h2_mmc_init(); /* irq for tps65010 chip */ omap_cfg_reg(W4_GPIO58); if (gpio_request(58, "tps65010") == 0) gpio_direction_input(58); - -#ifdef CONFIG_I2C_BOARDINFO - i2c_register_board_info(1, h2_i2c_board_info, - ARRAY_SIZE(h2_i2c_board_info)); -#endif } static void __init h2_map_io(void) diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c index f28f05d6760..7cf6ccd4e7f 100644 --- a/arch/arm/mach-omap1/board-h3.c +++ b/arch/arm/mach-omap1/board-h3.c @@ -517,11 +517,9 @@ static void __init h3_init(void) omap_board_config = h3_config; omap_board_config_size = ARRAY_SIZE(h3_config); omap_serial_init(); + omap_register_i2c_bus(1, 100, h3_i2c_board_info, + ARRAY_SIZE(h3_i2c_board_info)); h3_mmc_init(); - - /* FIXME setup irq for tps65013 chip */ - i2c_register_board_info(1, h3_i2c_board_info, - ARRAY_SIZE(h3_i2c_board_info)); } static void __init h3_init_smc91x(void) diff --git a/arch/arm/mach-omap1/board-innovator.c b/arch/arm/mach-omap1/board-innovator.c index 92c14d364b5..4b8ae3ee0d0 100644 --- a/arch/arm/mach-omap1/board-innovator.c +++ b/arch/arm/mach-omap1/board-innovator.c @@ -411,6 +411,7 @@ static void __init innovator_init(void) omap_board_config = innovator_config; omap_board_config_size = ARRAY_SIZE(innovator_config); omap_serial_init(); + omap_register_i2c_bus(1, 100, NULL, 0); } static void __init innovator_map_io(void) diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c index e2c8ffd75cf..9e8cdd4bd7d 100644 --- a/arch/arm/mach-omap1/board-nokia770.c +++ b/arch/arm/mach-omap1/board-nokia770.c @@ -330,6 +330,7 @@ static void __init omap_nokia770_init(void) omap_board_config_size = ARRAY_SIZE(nokia770_config); omap_gpio_init(); omap_serial_init(); + omap_register_i2c_bus(1, 100, NULL, 0); omap_dsp_init(); ads7846_dev_init(); mipid_dev_init(); diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c index e1f813d4417..effa176be57 100644 --- a/arch/arm/mach-omap1/board-osk.c +++ b/arch/arm/mach-omap1/board-osk.c @@ -473,10 +473,9 @@ static void __init osk_init(void) if (gpio_request(OMAP_MPUIO(1), "tps65010") == 0) gpio_direction_input(OMAP_MPUIO(1)); - i2c_register_board_info(1, osk_i2c_board_info, - ARRAY_SIZE(osk_i2c_board_info)); - omap_serial_init(); + omap_register_i2c_bus(1, 400, osk_i2c_board_info, + ARRAY_SIZE(osk_i2c_board_info)); osk_mistral_init(); } diff --git a/arch/arm/mach-omap1/board-palmte.c b/arch/arm/mach-omap1/board-palmte.c index 2f9d00a0013..f392f5a014e 100644 --- a/arch/arm/mach-omap1/board-palmte.c +++ b/arch/arm/mach-omap1/board-palmte.c @@ -419,6 +419,7 @@ static void __init omap_palmte_init(void) spi_register_board_info(palmte_spi_info, ARRAY_SIZE(palmte_spi_info)); omap_serial_init(); + omap_register_i2c_bus(1, 100, NULL, 0); palmte_gpio_setup(); } diff --git a/arch/arm/mach-omap1/board-palmtt.c b/arch/arm/mach-omap1/board-palmtt.c index 772daed493c..e9a1ef52f88 100644 --- a/arch/arm/mach-omap1/board-palmtt.c +++ b/arch/arm/mach-omap1/board-palmtt.c @@ -338,6 +338,7 @@ static void __init omap_palmtt_init(void) spi_register_board_info(palmtt_boardinfo,ARRAY_SIZE(palmtt_boardinfo)); omap_serial_init(); + omap_register_i2c_bus(1, 100, NULL, 0); } static void __init omap_palmtt_map_io(void) diff --git a/arch/arm/mach-omap1/board-palmz71.c b/arch/arm/mach-omap1/board-palmz71.c index a9a0f6610c3..2e1dbfc28ef 100644 --- a/arch/arm/mach-omap1/board-palmz71.c +++ b/arch/arm/mach-omap1/board-palmz71.c @@ -363,6 +363,7 @@ omap_palmz71_init(void) spi_register_board_info(palmz71_boardinfo, ARRAY_SIZE(palmz71_boardinfo)); omap_serial_init(); + omap_register_i2c_bus(1, 100, NULL, 0); palmz71_gpio_setup(0); } diff --git a/arch/arm/mach-omap1/board-perseus2.c b/arch/arm/mach-omap1/board-perseus2.c index e79749df434..cafe91f06ab 100644 --- a/arch/arm/mach-omap1/board-perseus2.c +++ b/arch/arm/mach-omap1/board-perseus2.c @@ -234,6 +234,7 @@ static void __init omap_perseus2_init(void) omap_board_config = perseus2_config; omap_board_config_size = ARRAY_SIZE(perseus2_config); omap_serial_init(); + omap_register_i2c_bus(1, 100, NULL, 0); } static void __init perseus2_init_smc91x(void) diff --git a/arch/arm/mach-omap1/board-sx1.c b/arch/arm/mach-omap1/board-sx1.c index be3ecd8c890..faa99b54c1e 100644 --- a/arch/arm/mach-omap1/board-sx1.c +++ b/arch/arm/mach-omap1/board-sx1.c @@ -442,6 +442,7 @@ static void __init omap_sx1_init(void) omap_board_config = sx1_config; omap_board_config_size = ARRAY_SIZE(sx1_config); omap_serial_init(); + omap_register_i2c_bus(1, 100, NULL, 0); sx1_mmc_init(); /* turn on USB power */ diff --git a/arch/arm/mach-omap1/board-voiceblue.c b/arch/arm/mach-omap1/board-voiceblue.c index c82a1cd20ad..02cac41aa5a 100644 --- a/arch/arm/mach-omap1/board-voiceblue.c +++ b/arch/arm/mach-omap1/board-voiceblue.c @@ -198,6 +198,7 @@ static void __init voiceblue_init(void) omap_board_config = voiceblue_config; omap_board_config_size = ARRAY_SIZE(voiceblue_config); omap_serial_init(); + omap_register_i2c_bus(1, 100, NULL, 0); /* There is a good chance board is going up, so enable power LED * (it is connected through invertor) */ -- cgit v1.2.3-70-g09d2 From d7730cc01f703b1e3c43127bd38fb042c0efdb71 Mon Sep 17 00:00:00 2001 From: Andrzej Zaborowski Date: Thu, 7 Dec 2006 17:13:51 -0800 Subject: ARM: OMAP1: Palm Tungsten E board clean-up Mostly gpio clean-up. Signed-off-by: Andrzej Zaborowski Signed-off-by: Tony Lindgren --- arch/arm/mach-omap1/board-palmte.c | 83 ++++++++++---------------------------- 1 file changed, 22 insertions(+), 61 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap1/board-palmte.c b/arch/arm/mach-omap1/board-palmte.c index f392f5a014e..ca1a4bf78a1 100644 --- a/arch/arm/mach-omap1/board-palmte.c +++ b/arch/arm/mach-omap1/board-palmte.c @@ -10,6 +10,8 @@ * Maintainers : http://palmtelinux.sf.net * palmtelinux-developpers@lists.sf.net * + * Copyright (c) 2006 Andrzej Zaborowski + * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. @@ -24,8 +26,8 @@ #include #include #include +#include -#include #include #include #include @@ -51,11 +53,11 @@ static void __init omap_palmte_init_irq(void) omap_gpio_init(); } -static int palmte_keymap[] = { - KEY(0, 0, KEY_F1), - KEY(0, 1, KEY_F2), - KEY(0, 2, KEY_F3), - KEY(0, 3, KEY_F4), +static const int palmte_keymap[] = { + KEY(0, 0, KEY_F1), /* Calendar */ + KEY(0, 1, KEY_F2), /* Contacts */ + KEY(0, 2, KEY_F3), /* Tasks List */ + KEY(0, 3, KEY_F4), /* Note Pad */ KEY(0, 4, KEY_POWER), KEY(1, 0, KEY_LEFT), KEY(1, 1, KEY_DOWN), @@ -68,7 +70,7 @@ static int palmte_keymap[] = { static struct omap_kp_platform_data palmte_kp_data = { .rows = 8, .cols = 8, - .keymap = palmte_keymap, + .keymap = (int *) palmte_keymap, .rep = 1, .delay = 12, }; @@ -180,7 +182,7 @@ static struct platform_device palmte_irda_device = { .resource = palmte_irda_resources, }; -static struct platform_device *devices[] __initdata = { +static struct platform_device *palmte_devices[] __initdata = { &palmte_rom_device, &palmte_kp_device, &palmte_lcd_device, @@ -273,7 +275,7 @@ static void palmte_get_power_status(struct apm_power_info *info, int *battery) info->time = 0; } else { while (hi > lo + 1) { - mid = (hi + lo) >> 2; + mid = (hi + lo) >> 1; if (batt <= palmte_battery_sample[mid]) lo = mid; else @@ -321,7 +323,7 @@ static struct tsc2102_config palmte_tsc2102_config = { .alsa_config = &palmte_alsa_config, }; -static struct omap_board_config_kernel palmte_config[] = { +static struct omap_board_config_kernel palmte_config[] __initdata = { { OMAP_TAG_USB, &palmte_usb_config }, { OMAP_TAG_MMC, &palmte_mmc_config }, { OMAP_TAG_LCD, &palmte_lcd_config }, @@ -339,74 +341,34 @@ static struct spi_board_info palmte_spi_info[] __initdata = { }, }; -/* Periodically check for changes on important input pins */ -struct timer_list palmte_pin_timer; -int prev_power, prev_headphones; - -static void palmte_pin_handler(unsigned long data) { - int power, headphones; - - power = !omap_get_gpio_datain(PALMTE_DC_GPIO); - headphones = omap_get_gpio_datain(PALMTE_HEADPHONES_GPIO); - - if (power && !prev_power) - printk(KERN_INFO "PM: cable connected\n"); - else if (!power && prev_power) - printk(KERN_INFO "PM: cable disconnected\n"); - - if (headphones && !prev_headphones) { +static void palmte_headphones_detect(void *data, int state) +{ + if (state) { /* Headphones connected, disable speaker */ omap_set_gpio_dataout(PALMTE_SPEAKER_GPIO, 0); printk(KERN_INFO "PM: speaker off\n"); - } else if (!headphones && prev_headphones) { + } else { /* Headphones unplugged, re-enable speaker */ omap_set_gpio_dataout(PALMTE_SPEAKER_GPIO, 1); printk(KERN_INFO "PM: speaker on\n"); } - - prev_power = power; - prev_headphones = headphones; - mod_timer(&palmte_pin_timer, jiffies + msecs_to_jiffies(500)); } -static void __init palmte_gpio_setup(void) +static void __init palmte_misc_gpio_setup(void) { - /* Set TSC2102 PINTDAV pin as input */ + /* Set TSC2102 PINTDAV pin as input (used by TSC2102 driver) */ if (omap_request_gpio(PALMTE_PINTDAV_GPIO)) { printk(KERN_ERR "Could not reserve PINTDAV GPIO!\n"); return; } omap_set_gpio_direction(PALMTE_PINTDAV_GPIO, 1); - /* Monitor cable-connected signals */ - if (omap_request_gpio(PALMTE_DC_GPIO) || - omap_request_gpio(PALMTE_USB_OR_DC_GPIO) || - omap_request_gpio(PALMTE_USBDETECT_GPIO)) { + /* Set USB-or-DC-IN pin as input (unused) */ + if (omap_request_gpio(PALMTE_USB_OR_DC_GPIO)) { printk(KERN_ERR "Could not reserve cable signal GPIO!\n"); return; } - omap_set_gpio_direction(PALMTE_DC_GPIO, 1); omap_set_gpio_direction(PALMTE_USB_OR_DC_GPIO, 1); - omap_set_gpio_direction(PALMTE_USBDETECT_GPIO, 1); - - /* Set speaker-enable pin as output */ - if (omap_request_gpio(PALMTE_SPEAKER_GPIO)) { - printk(KERN_ERR "Could not reserve speaker GPIO!\n"); - return; - } - omap_set_gpio_direction(PALMTE_SPEAKER_GPIO, 0); - - /* Monitor the headphones-connected signal */ - if (omap_request_gpio(PALMTE_HEADPHONES_GPIO)) { - printk(KERN_ERR "Could not reserve headphones signal GPIO!\n"); - return; - } - omap_set_gpio_direction(PALMTE_HEADPHONES_GPIO, 1); - - prev_power = omap_get_gpio_datain(PALMTE_DC_GPIO); - prev_headphones = !omap_get_gpio_datain(PALMTE_HEADPHONES_GPIO); - setup_timer(&palmte_pin_timer, palmte_pin_handler, 0); - palmte_pin_handler(0); } static void __init omap_palmte_init(void) @@ -414,13 +376,12 @@ static void __init omap_palmte_init(void) omap_board_config = palmte_config; omap_board_config_size = ARRAY_SIZE(palmte_config); - platform_add_devices(devices, ARRAY_SIZE(devices)); + platform_add_devices(palmte_devices, ARRAY_SIZE(palmte_devices)); spi_register_board_info(palmte_spi_info, ARRAY_SIZE(palmte_spi_info)); - + palmte_misc_gpio_setup(); omap_serial_init(); omap_register_i2c_bus(1, 100, NULL, 0); - palmte_gpio_setup(); } static void __init omap_palmte_map_io(void) -- cgit v1.2.3-70-g09d2 From 80dbfde54bfc40c1e39ace7dbb371f095e74665f Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Tue, 18 Dec 2007 21:15:53 -0800 Subject: ARM: OMAP1: Update defconfigs for omap1 Update defconfigs for omap1 Signed-off-by: Tony Lindgren --- arch/arm/configs/omap_h2_1610_defconfig | 241 ++++++++++++++++--------------- arch/arm/configs/omap_osk_5912_defconfig | 110 +++++++------- 2 files changed, 179 insertions(+), 172 deletions(-) (limited to 'arch') diff --git a/arch/arm/configs/omap_h2_1610_defconfig b/arch/arm/configs/omap_h2_1610_defconfig index 64aa431f851..c2345af3707 100644 --- a/arch/arm/configs/omap_h2_1610_defconfig +++ b/arch/arm/configs/omap_h2_1610_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.23-rc6 -# Mon Sep 17 14:21:45 2007 +# Linux kernel version: 2.6.24-rc5 +# Mon Dec 17 20:04:38 2007 # CONFIG_ARM=y CONFIG_SYS_SUPPORTS_APM_EMULATION=y @@ -41,9 +41,14 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_USER_NS is not set +# CONFIG_PID_NS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +CONFIG_FAIR_GROUP_SCHED=y +CONFIG_FAIR_USER_SCHED=y +# CONFIG_FAIR_CGROUP_SCHED is not set # CONFIG_SYSFS_DEPRECATED is not set # CONFIG_RELAY is not set CONFIG_BLK_DEV_INITRD=y @@ -64,7 +69,6 @@ CONFIG_FUTEX=y CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y -CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_VM_EVENT_COUNTERS=y @@ -74,20 +78,12 @@ CONFIG_SLAB=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 - -# -# Loadable module support -# CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set # CONFIG_KMOD is not set - -# -# Block layer -# CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set @@ -232,10 +228,6 @@ CONFIG_ARM_THUMB=y # # CONFIG_PCI_SYSCALL is not set # CONFIG_ARCH_SUPPORTS_MSI is not set - -# -# PCCARD (PCMCIA/CardBus) support -# # CONFIG_PCCARD is not set # @@ -244,6 +236,7 @@ CONFIG_ARM_THUMB=y CONFIG_TICK_ONESHOT=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y CONFIG_PREEMPT=y CONFIG_HZ=128 CONFIG_AEABI=y @@ -256,6 +249,7 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_SPLIT_PTLOCK_CPUS=4096 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 @@ -283,6 +277,8 @@ CONFIG_CPU_FREQ_STAT=y # CONFIG_CPU_FREQ_STAT_DETAILS is not set # CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y +# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set # CONFIG_CPU_FREQ_GOV_PERFORMANCE is not set # CONFIG_CPU_FREQ_GOV_POWERSAVE is not set CONFIG_CPU_FREQ_GOV_USERSPACE=y @@ -355,6 +351,7 @@ CONFIG_IP_PNP_BOOTP=y CONFIG_INET_XFRM_MODE_TRANSPORT=y CONFIG_INET_XFRM_MODE_TUNNEL=y CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_LRO is not set CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set @@ -366,20 +363,8 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set - -# -# DCCP Configuration (EXPERIMENTAL) -# # CONFIG_IP_DCCP is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# # CONFIG_IP_SCTP is not set - -# -# TIPC Configuration (EXPERIMENTAL) -# # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -392,10 +377,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# # CONFIG_NET_SCHED is not set # @@ -424,14 +405,11 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # # Generic Driver Options # +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set # CONFIG_SYS_HYPERVISOR is not set - -# -# Connector - unified userspace <-> kernelspace linker -# # CONFIG_CONNECTOR is not set # CONFIG_MTD is not set # CONFIG_PARPORT is not set @@ -446,6 +424,8 @@ CONFIG_BLK_DEV_RAM_SIZE=8192 CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 # CONFIG_CDROM_PKTCDVD is not set CONFIG_ATA_OVER_ETH=m +CONFIG_MISC_DEVICES=y +# CONFIG_EEPROM_93CX6 is not set # # SCSI device support @@ -483,19 +463,12 @@ CONFIG_SCSI_WAIT_SCAN=m # CONFIG_SCSI_FC_ATTRS is not set # CONFIG_SCSI_ISCSI_ATTRS is not set # CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_SCSI_DEBUG is not set # CONFIG_ATA is not set - -# -# Multi-device support (RAID and LVM) -# # CONFIG_MD is not set - -# -# Network device support -# CONFIG_NETDEVICES=y # CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set @@ -503,23 +476,21 @@ CONFIG_NETDEVICES=y # CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set +# CONFIG_VETH is not set # CONFIG_PHYLIB is not set - -# -# Ethernet (10 or 100Mbit) -# CONFIG_NET_ETHERNET=y CONFIG_MII=y # CONFIG_AX88796 is not set CONFIG_SMC91X=y # CONFIG_DM9000 is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_B44 is not set CONFIG_NETDEV_1000=y CONFIG_NETDEV_10000=y -# -# Token Ring devices -# - # # Wireless LAN # @@ -545,10 +516,6 @@ CONFIG_SLHC=y # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set - -# -# ISDN subsystem -# # CONFIG_ISDN is not set # @@ -566,7 +533,6 @@ CONFIG_INPUT_MOUSEDEV_PSAUX=y CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set CONFIG_INPUT_EVDEV=y CONFIG_INPUT_EVBUG=y @@ -585,7 +551,6 @@ CONFIG_INPUT_MISC=y # CONFIG_INPUT_POWERMATE is not set # CONFIG_INPUT_YEALINK is not set CONFIG_INPUT_UINPUT=y -# CONFIG_INPUT_POLLDEV is not set # # Hardware I/O ports @@ -620,29 +585,52 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_UNIX98_PTYS=y # CONFIG_LEGACY_PTYS is not set +# CONFIG_IPMI_HANDLER is not set +# CONFIG_HW_RANDOM is not set +# CONFIG_NVRAM is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +# CONFIG_I2C_CHARDEV is not set # -# IPMI +# I2C Algorithms # -# CONFIG_IPMI_HANDLER is not set -CONFIG_WATCHDOG=y -CONFIG_WATCHDOG_NOWAYOUT=y +# CONFIG_I2C_ALGOBIT is not set +# CONFIG_I2C_ALGOPCF is not set +# CONFIG_I2C_ALGOPCA is not set # -# Watchdog Device Drivers +# I2C Hardware Bus support # -# CONFIG_SOFT_WATCHDOG is not set -# CONFIG_OMAP_WATCHDOG is not set -# CONFIG_HW_RANDOM is not set -# CONFIG_NVRAM is not set -# CONFIG_R3964 is not set -# CONFIG_RAW_DRIVER is not set +# CONFIG_I2C_GPIO is not set +# CONFIG_I2C_OCORES is not set +CONFIG_I2C_OMAP=y +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_SIMTEC is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_STUB is not set # -# TPM devices +# Miscellaneous I2C Chip support # -# CONFIG_TCG_TPM is not set -# CONFIG_I2C is not set +# CONFIG_SENSORS_DS1337 is not set +# CONFIG_SENSORS_DS1374 is not set +# CONFIG_DS1682 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_ISP1301_OMAP is not set +CONFIG_TPS65010=y +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set # # SPI support @@ -650,28 +638,73 @@ CONFIG_WATCHDOG_NOWAYOUT=y # CONFIG_SPI is not set # CONFIG_SPI_MASTER is not set # CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set -# CONFIG_SENSORS_ABITUGURU is not set -# CONFIG_SENSORS_ABITUGURU3 is not set +# CONFIG_SENSORS_AD7418 is not set +# CONFIG_SENSORS_ADM1021 is not set +# CONFIG_SENSORS_ADM1025 is not set +# CONFIG_SENSORS_ADM1026 is not set +# CONFIG_SENSORS_ADM1029 is not set +# CONFIG_SENSORS_ADM1031 is not set +# CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ADT7470 is not set +# CONFIG_SENSORS_ATXP1 is not set +# CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_F71882FG is not set +# CONFIG_SENSORS_F75375S is not set +# CONFIG_SENSORS_GL518SM is not set +# CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_LM63 is not set +# CONFIG_SENSORS_LM75 is not set +# CONFIG_SENSORS_LM77 is not set +# CONFIG_SENSORS_LM78 is not set +# CONFIG_SENSORS_LM80 is not set +# CONFIG_SENSORS_LM83 is not set +# CONFIG_SENSORS_LM85 is not set +# CONFIG_SENSORS_LM87 is not set +# CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set +# CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_MAX1619 is not set +# CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_DME1737 is not set # CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47M192 is not set # CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_THMC50 is not set # CONFIG_SENSORS_VT1211 is not set +# CONFIG_SENSORS_W83781D is not set +# CONFIG_SENSORS_W83791D is not set +# CONFIG_SENSORS_W83792D is not set +# CONFIG_SENSORS_W83793 is not set +# CONFIG_SENSORS_W83L785TS is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set # CONFIG_HWMON_DEBUG_CHIP is not set -CONFIG_MISC_DEVICES=y -# CONFIG_EEPROM_93CX6 is not set +CONFIG_WATCHDOG=y +CONFIG_WATCHDOG_NOWAYOUT=y + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set +# CONFIG_OMAP_WATCHDOG is not set + +# +# Sonics Silicon Backplane +# +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set # # Multifunction device drivers # # CONFIG_MFD_SM501 is not set -# CONFIG_NEW_LEDS is not set # # Multimedia devices @@ -683,12 +716,6 @@ CONFIG_DAB=y # # Graphics support # -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set - -# -# Display device support -# -# CONFIG_DISPLAY_SUPPORT is not set # CONFIG_VGASTATE is not set CONFIG_VIDEO_OUTPUT_CONTROL=m CONFIG_FB=y @@ -697,6 +724,7 @@ CONFIG_FIRMWARE_EDID=y # CONFIG_FB_CFB_FILLRECT is not set # CONFIG_FB_CFB_COPYAREA is not set # CONFIG_FB_CFB_IMAGEBLIT is not set +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set # CONFIG_FB_SYS_FILLRECT is not set # CONFIG_FB_SYS_COPYAREA is not set # CONFIG_FB_SYS_IMAGEBLIT is not set @@ -712,8 +740,14 @@ CONFIG_FB_MODE_HELPERS=y # Frame buffer hardware drivers # # CONFIG_FB_S1D13XXX is not set -# CONFIG_FB_OMAP is not set # CONFIG_FB_VIRTUAL is not set +# CONFIG_FB_OMAP is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set # # Console display driver support @@ -758,6 +792,7 @@ CONFIG_SOUND_PRIME=y CONFIG_HID_SUPPORT=y CONFIG_HID=y CONFIG_HID_DEBUG=y +# CONFIG_HIDRAW is not set CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -773,22 +808,10 @@ CONFIG_USB_ARCH_HAS_OHCI=y # # CONFIG_USB_GADGET is not set # CONFIG_MMC is not set +# CONFIG_NEW_LEDS is not set CONFIG_RTC_LIB=y # CONFIG_RTC_CLASS is not set -# -# DMA Engine support -# -# CONFIG_DMA_ENGINE is not set - -# -# DMA Clients -# - -# -# DMA Devices -# - # # File systems # @@ -837,7 +860,6 @@ CONFIG_PROC_SYSCTL=y CONFIG_SYSFS=y # CONFIG_TMPFS is not set # CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y # CONFIG_CONFIGFS_FS is not set # @@ -856,10 +878,7 @@ CONFIG_CRAMFS=y # CONFIG_QNX4FS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set - -# -# Network File Systems -# +CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set @@ -886,10 +905,6 @@ CONFIG_RPCSEC_GSS_KRB5=y # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y - -# -# Native Language Support -# CONFIG_NLS=y CONFIG_NLS_DEFAULT="iso8859-1" CONFIG_NLS_CODEPAGE_437=y @@ -930,21 +945,16 @@ CONFIG_NLS_ISO8859_1=y # CONFIG_NLS_KOI8_R is not set # CONFIG_NLS_KOI8_U is not set # CONFIG_NLS_UTF8 is not set - -# -# Distributed Lock Manager -# # CONFIG_DLM is not set - -# -# Profiling support -# +CONFIG_INSTRUMENTATION=y # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set # # Kernel hacking # # CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set @@ -953,6 +963,7 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_DEBUG_KERNEL is not set CONFIG_DEBUG_BUGVERBOSE=y CONFIG_FRAME_POINTER=y +# CONFIG_SAMPLES is not set # CONFIG_DEBUG_USER is not set # @@ -960,6 +971,7 @@ CONFIG_FRAME_POINTER=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_BLKCIPHER=y @@ -979,6 +991,7 @@ CONFIG_CRYPTO_ECB=m CONFIG_CRYPTO_CBC=y CONFIG_CRYPTO_PCBC=m # CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_XTS is not set # CONFIG_CRYPTO_CRYPTD is not set CONFIG_CRYPTO_DES=y # CONFIG_CRYPTO_FCRYPT is not set @@ -992,11 +1005,13 @@ CONFIG_CRYPTO_DES=y # CONFIG_CRYPTO_ARC4 is not set # CONFIG_CRYPTO_KHAZAD is not set # CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_SEED is not set # CONFIG_CRYPTO_DEFLATE is not set # CONFIG_CRYPTO_MICHAEL_MIC is not set # CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_TEST is not set +# CONFIG_CRYPTO_AUTHENC is not set CONFIG_CRYPTO_HW=y # diff --git a/arch/arm/configs/omap_osk_5912_defconfig b/arch/arm/configs/omap_osk_5912_defconfig index 8c1f15c7c45..d592a648711 100644 --- a/arch/arm/configs/omap_osk_5912_defconfig +++ b/arch/arm/configs/omap_osk_5912_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.23-rc6 -# Mon Sep 17 14:15:05 2007 +# Linux kernel version: 2.6.24-rc5 +# Mon Dec 17 21:12:45 2007 # CONFIG_ARM=y CONFIG_SYS_SUPPORTS_APM_EMULATION=y @@ -40,9 +40,14 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_USER_NS is not set +# CONFIG_PID_NS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +CONFIG_FAIR_GROUP_SCHED=y +CONFIG_FAIR_USER_SCHED=y +# CONFIG_FAIR_CGROUP_SCHED is not set # CONFIG_SYSFS_DEPRECATED is not set # CONFIG_RELAY is not set CONFIG_BLK_DEV_INITRD=y @@ -63,7 +68,6 @@ CONFIG_FUTEX=y CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y -CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_VM_EVENT_COUNTERS=y @@ -224,10 +228,6 @@ CONFIG_CPU_CP15_MMU=y # # CONFIG_PCI_SYSCALL is not set # CONFIG_ARCH_SUPPORTS_MSI is not set - -# -# PCCARD (PCMCIA/CardBus) support -# CONFIG_PCCARD=y # CONFIG_PCMCIA_DEBUG is not set CONFIG_PCMCIA=y @@ -245,6 +245,7 @@ CONFIG_OMAP_CF=y CONFIG_TICK_ONESHOT=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y # CONFIG_PREEMPT is not set CONFIG_HZ=128 CONFIG_AEABI=y @@ -257,6 +258,7 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_SPLIT_PTLOCK_CPUS=4096 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 @@ -346,6 +348,7 @@ CONFIG_IP_PNP_BOOTP=y CONFIG_INET_XFRM_MODE_TRANSPORT=y CONFIG_INET_XFRM_MODE_TUNNEL=y CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_LRO is not set CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set @@ -371,10 +374,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# # CONFIG_NET_SCHED is not set # @@ -403,6 +402,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # # Generic Driver Options # +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y @@ -427,6 +427,7 @@ CONFIG_MTD_BLOCK=y # CONFIG_INFTL is not set # CONFIG_RFD_FTL is not set # CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set # # RAM/ROM/Flash chip drivers @@ -495,6 +496,8 @@ CONFIG_BLK_DEV_RAM_SIZE=8192 CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set +CONFIG_MISC_DEVICES=y +# CONFIG_EEPROM_93CX6 is not set CONFIG_IDE=m CONFIG_BLK_DEV_IDE=m @@ -515,9 +518,10 @@ CONFIG_IDE_PROC_FS=y # IDE chipset support/bugfixes # # CONFIG_IDE_GENERIC is not set -# CONFIG_IDEPCI_PCIBUS_ORDER is not set +# CONFIG_BLK_DEV_PLATFORM is not set # CONFIG_IDE_ARM is not set # CONFIG_BLK_DEV_IDEDMA is not set +CONFIG_IDE_ARCH_OBSOLETE_INIT=y # CONFIG_BLK_DEV_HD is not set # @@ -536,12 +540,18 @@ CONFIG_NETDEVICES=y # CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set +# CONFIG_VETH is not set # CONFIG_PHYLIB is not set CONFIG_NET_ETHERNET=y CONFIG_MII=y # CONFIG_AX88796 is not set CONFIG_SMC91X=y # CONFIG_DM9000 is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_B44 is not set CONFIG_NETDEV_1000=y CONFIG_NETDEV_10000=y @@ -585,7 +595,6 @@ CONFIG_INPUT_MOUSEDEV=y CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set CONFIG_INPUT_EVDEV=y # CONFIG_INPUT_EVBUG is not set @@ -651,7 +660,6 @@ CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set -# CONFIG_WATCHDOG is not set CONFIG_HW_RANDOM=m CONFIG_HW_RANDOM_OMAP=m # CONFIG_NVRAM is not set @@ -712,10 +720,9 @@ CONFIG_TPS65010=y # CONFIG_SPI is not set # CONFIG_SPI_MASTER is not set # CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set -# CONFIG_SENSORS_ABITUGURU is not set -# CONFIG_SENSORS_ABITUGURU3 is not set # CONFIG_SENSORS_AD7418 is not set # CONFIG_SENSORS_ADM1021 is not set # CONFIG_SENSORS_ADM1025 is not set @@ -723,12 +730,12 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADM1029 is not set # CONFIG_SENSORS_ADM1031 is not set # CONFIG_SENSORS_ADM9240 is not set -# CONFIG_SENSORS_ASB100 is not set +# CONFIG_SENSORS_ADT7470 is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_F71805F is not set -# CONFIG_SENSORS_FSCHER is not set -# CONFIG_SENSORS_FSCPOS is not set +# CONFIG_SENSORS_F71882FG is not set +# CONFIG_SENSORS_F75375S is not set # CONFIG_SENSORS_GL518SM is not set # CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set @@ -761,14 +768,18 @@ CONFIG_HWMON=y # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set # CONFIG_HWMON_DEBUG_CHIP is not set -CONFIG_MISC_DEVICES=y -# CONFIG_EEPROM_93CX6 is not set +# CONFIG_WATCHDOG is not set + +# +# Sonics Silicon Backplane +# +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set # # Multifunction device drivers # # CONFIG_MFD_SM501 is not set -# CONFIG_NEW_LEDS is not set # # Multimedia devices @@ -780,12 +791,6 @@ CONFIG_DAB=y # # Graphics support # -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set - -# -# Display device support -# -# CONFIG_DISPLAY_SUPPORT is not set # CONFIG_VGASTATE is not set CONFIG_VIDEO_OUTPUT_CONTROL=m CONFIG_FB=y @@ -794,6 +799,7 @@ CONFIG_FIRMWARE_EDID=y # CONFIG_FB_CFB_FILLRECT is not set # CONFIG_FB_CFB_COPYAREA is not set # CONFIG_FB_CFB_IMAGEBLIT is not set +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set # CONFIG_FB_SYS_FILLRECT is not set # CONFIG_FB_SYS_COPYAREA is not set # CONFIG_FB_SYS_IMAGEBLIT is not set @@ -809,8 +815,14 @@ CONFIG_FB_MODE_HELPERS=y # Frame buffer hardware drivers # # CONFIG_FB_S1D13XXX is not set -# CONFIG_FB_OMAP is not set # CONFIG_FB_VIRTUAL is not set +# CONFIG_FB_OMAP is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set # # Console display driver support @@ -843,6 +855,7 @@ CONFIG_LOGO_LINUX_CLUT224=y CONFIG_HID_SUPPORT=y CONFIG_HID=y CONFIG_HID_DEBUG=y +# CONFIG_HIDRAW is not set CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -858,22 +871,10 @@ CONFIG_USB_ARCH_HAS_OHCI=y # # CONFIG_USB_GADGET is not set # CONFIG_MMC is not set +# CONFIG_NEW_LEDS is not set CONFIG_RTC_LIB=y # CONFIG_RTC_CLASS is not set -# -# DMA Engine support -# -# CONFIG_DMA_ENGINE is not set - -# -# DMA Clients -# - -# -# DMA Devices -# - # # File systems # @@ -922,7 +923,6 @@ CONFIG_PROC_SYSCTL=y CONFIG_SYSFS=y # CONFIG_TMPFS is not set # CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y # CONFIG_CONFIGFS_FS is not set # @@ -938,10 +938,12 @@ CONFIG_RAMFS=y CONFIG_JFFS2_FS=y CONFIG_JFFS2_FS_DEBUG=0 CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set # CONFIG_JFFS2_SUMMARY is not set # CONFIG_JFFS2_FS_XATTR is not set # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set CONFIG_JFFS2_ZLIB=y +# CONFIG_JFFS2_LZO is not set CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set # CONFIG_CRAMFS is not set @@ -950,10 +952,7 @@ CONFIG_JFFS2_RTIME=y # CONFIG_QNX4FS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set - -# -# Network File Systems -# +CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set @@ -979,10 +978,6 @@ CONFIG_SUNRPC=y # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y - -# -# Native Language Support -# CONFIG_NLS=m CONFIG_NLS_DEFAULT="iso8859-1" CONFIG_NLS_CODEPAGE_437=m @@ -1023,21 +1018,16 @@ CONFIG_NLS_ISO8859_1=m # CONFIG_NLS_KOI8_R is not set # CONFIG_NLS_KOI8_U is not set # CONFIG_NLS_UTF8 is not set - -# -# Distributed Lock Manager -# # CONFIG_DLM is not set - -# -# Profiling support -# +CONFIG_INSTRUMENTATION=y # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set # # Kernel hacking # # CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set @@ -1046,6 +1036,7 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_DEBUG_KERNEL is not set CONFIG_DEBUG_BUGVERBOSE=y CONFIG_FRAME_POINTER=y +# CONFIG_SAMPLES is not set # CONFIG_DEBUG_USER is not set # @@ -1053,6 +1044,7 @@ CONFIG_FRAME_POINTER=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set # CONFIG_CRYPTO is not set # -- cgit v1.2.3-70-g09d2 From e27a93a944a5ba6a0112750c8243abba86d56e94 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Tue, 18 Dec 2007 20:58:32 -0800 Subject: ARM: OMAP1: Misc clean-up This patch cleans up omap1 files to sync up with linux-omap tree: - Remove omap-generic MMC config as it should be defined in board-*.c files instead of using board-generic.c - New style I2C board_info from David Brownell - Init section fixes from Dirk Behme Signed-off-by: Tony Lindgren --- arch/arm/mach-omap1/board-generic.c | 23 ++--------------- arch/arm/mach-omap1/board-h2.c | 48 +++++++---------------------------- arch/arm/mach-omap1/board-h3.c | 36 +++----------------------- arch/arm/mach-omap1/board-nokia770.c | 2 +- arch/arm/mach-omap1/board-osk.c | 2 +- arch/arm/mach-omap1/board-palmtt.c | 2 +- arch/arm/mach-omap1/board-palmz71.c | 2 +- arch/arm/mach-omap1/board-perseus2.c | 2 +- arch/arm/mach-omap1/board-sx1.c | 24 +++--------------- arch/arm/mach-omap1/board-voiceblue.c | 3 --- arch/arm/mach-omap1/mailbox.c | 14 +++++----- arch/arm/mach-omap1/pm.c | 1 - 12 files changed, 30 insertions(+), 129 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap1/board-generic.c b/arch/arm/mach-omap1/board-generic.c index 005bf0e3e1e..c711bf23f7b 100644 --- a/arch/arm/mach-omap1/board-generic.c +++ b/arch/arm/mach-omap1/board-generic.c @@ -55,33 +55,14 @@ static struct omap_usb_config generic1610_usb_config __initdata = { .hmc_mode = 16, .pins[0] = 6, }; - -static struct omap_mmc_config generic_mmc_config __initdata = { - .mmc [0] = { - .enabled = 0, - .wire4 = 0, - .wp_pin = -1, - .power_pin = -1, - .switch_pin = -1, - }, - .mmc [1] = { - .enabled = 0, - .wire4 = 0, - .wp_pin = -1, - .power_pin = -1, - .switch_pin = -1, - }, -}; - #endif static struct omap_uart_config generic_uart_config __initdata = { .enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)), }; -static struct omap_board_config_kernel generic_config[] = { - { OMAP_TAG_USB, NULL }, - { OMAP_TAG_MMC, &generic_mmc_config }, +static struct omap_board_config_kernel generic_config[] __initdata = { + { OMAP_TAG_USB, NULL }, { OMAP_TAG_UART, &generic_uart_config }, }; diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c index 00b7623b9b0..070345ee39a 100644 --- a/arch/arm/mach-omap1/board-h2.c +++ b/arch/arm/mach-omap1/board-h2.c @@ -37,6 +37,7 @@ #include #include +#include #include #include #include @@ -47,8 +48,6 @@ #include #include -extern int omap_gpio_init(void); - static int h2_keymap[] = { KEY(0, 0, KEY_LEFT), KEY(0, 1, KEY_RIGHT), @@ -341,22 +340,6 @@ static struct platform_device *h2_devices[] __initdata = { &h2_mcbsp1_device, }; -#ifdef CONFIG_I2C_BOARDINFO -static struct i2c_board_info __initdata h2_i2c_board_info[] = { - { - I2C_BOARD_INFO("tps65010", 0x48), - .type = "tps65010", - .irq = OMAP_GPIO_IRQ(58), - }, - /* TODO when driver support is ready: - * - isp1301 OTG transceiver - * - optional ov9640 camera sensor at 0x30 - * - pcf9754 for aGPS control - * - ... etc - */ -}; -#endif - static void __init h2_init_smc91x(void) { if ((omap_request_gpio(0)) < 0) { @@ -365,6 +348,14 @@ static void __init h2_init_smc91x(void) } } +static struct i2c_board_info __initdata h2_i2c_board_info[] = { + { + I2C_BOARD_INFO("isp1301_omap", 0x2d), + .type = "isp1301_omap", + .irq = OMAP_GPIO_IRQ(2), + }, +}; + static void __init h2_init_irq(void) { omap1_init_common_hw(); @@ -461,11 +452,6 @@ static void __init h2_init(void) omap_register_i2c_bus(1, 100, h2_i2c_board_info, ARRAY_SIZE(h2_i2c_board_info)); h2_mmc_init(); - - /* irq for tps65010 chip */ - omap_cfg_reg(W4_GPIO58); - if (gpio_request(58, "tps65010") == 0) - gpio_direction_input(58); } static void __init h2_map_io(void) @@ -473,22 +459,6 @@ static void __init h2_map_io(void) omap1_map_common_io(); } -#ifdef CONFIG_TPS65010 -static int __init h2_tps_init(void) -{ - if (!machine_is_omap_h2()) - return 0; - - /* gpio3 for SD, gpio4 for VDD_DSP */ - /* FIXME send power to DSP iff it's configured */ - - /* Enable LOW_PWR */ - tps65010_set_low_pwr(ON); - return 0; -} -fs_initcall(h2_tps_init); -#endif - MACHINE_START(OMAP_H2, "TI-H2") /* Maintainer: Imre Deak */ .phys_io = 0xfff00000, diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c index 7cf6ccd4e7f..6fc516855a8 100644 --- a/arch/arm/mach-omap1/board-h3.c +++ b/arch/arm/mach-omap1/board-h3.c @@ -51,8 +51,6 @@ #include #include -extern int omap_gpio_init(void); - static int h3_keymap[] = { KEY(0, 0, KEY_LEFT), KEY(0, 1, KEY_RIGHT), @@ -452,26 +450,13 @@ static struct omap_lcd_config h3_lcd_config __initdata = { .ctrl_name = "internal", }; -static struct omap_board_config_kernel h3_config[] = { +static struct omap_board_config_kernel h3_config[] __initdata = { { OMAP_TAG_USB, &h3_usb_config }, { OMAP_TAG_MMC, &h3_mmc_config }, { OMAP_TAG_UART, &h3_uart_config }, { OMAP_TAG_LCD, &h3_lcd_config }, }; -static struct i2c_board_info __initdata h3_i2c_board_info[] = { - { - I2C_BOARD_INFO("tps65010", 0x48), - .type = "tps65013", - /* .irq = OMAP_GPIO_IRQ(??), */ - }, - /* TODO when driver support is ready: - * - isp1301 OTG transceiver - * - optional ov9640 camera sensor at 0x30 - * - ... - */ -}; - static struct omap_gpio_switch h3_gpio_switches[] __initdata = { { .name = "mmc_slot", @@ -514,6 +499,8 @@ static void __init h3_init(void) omap_cfg_reg(V2_1710_GPIO10); platform_add_devices(devices, ARRAY_SIZE(devices)); + spi_register_board_info(h3_spi_board_info, + ARRAY_SIZE(h3_spi_board_info)); omap_board_config = h3_config; omap_board_config_size = ARRAY_SIZE(h3_config); omap_serial_init(); @@ -544,23 +531,6 @@ static void __init h3_map_io(void) omap1_map_common_io(); } -#ifdef CONFIG_TPS65010 -static int __init h3_tps_init(void) -{ - if (!machine_is_omap_h3()) - return 0; - - /* gpio4 for SD, gpio3 for VDD_DSP */ - /* FIXME send power to DSP iff it's configured */ - - /* Enable LOW_PWR */ - tps65013_set_low_pwr(ON); - - return 0; -} -fs_initcall(h3_tps_init); -#endif - MACHINE_START(OMAP_H3, "TI OMAP1710 H3 board") /* Maintainer: Texas Instruments, Inc. */ .phys_io = 0xfff00000, diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c index 9e8cdd4bd7d..bcb984f2300 100644 --- a/arch/arm/mach-omap1/board-nokia770.c +++ b/arch/arm/mach-omap1/board-nokia770.c @@ -189,7 +189,7 @@ static struct omap_mmc_config nokia770_mmc_config __initdata = { }, }; -static struct omap_board_config_kernel nokia770_config[] = { +static struct omap_board_config_kernel nokia770_config[] __initdata = { { OMAP_TAG_USB, NULL }, { OMAP_TAG_MMC, &nokia770_mmc_config }, }; diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c index effa176be57..5279e35a8ae 100644 --- a/arch/arm/mach-omap1/board-osk.c +++ b/arch/arm/mach-omap1/board-osk.c @@ -253,7 +253,7 @@ static struct omap_lcd_config osk_lcd_config __initdata = { }; #endif -static struct omap_board_config_kernel osk_config[] = { +static struct omap_board_config_kernel osk_config[] __initdata = { { OMAP_TAG_USB, &osk_usb_config }, { OMAP_TAG_UART, &osk_uart_config }, #ifdef CONFIG_OMAP_OSK_MISTRAL diff --git a/arch/arm/mach-omap1/board-palmtt.c b/arch/arm/mach-omap1/board-palmtt.c index e9a1ef52f88..2a033689f9f 100644 --- a/arch/arm/mach-omap1/board-palmtt.c +++ b/arch/arm/mach-omap1/board-palmtt.c @@ -312,7 +312,7 @@ static struct omap_uart_config palmtt_uart_config __initdata = { .enabled_uarts = (1 << 0) | (1 << 1) | (0 << 2), }; -static struct omap_board_config_kernel palmtt_config[] = { +static struct omap_board_config_kernel palmtt_config[] __initdata = { { OMAP_TAG_USB, &palmtt_usb_config }, { OMAP_TAG_LCD, &palmtt_lcd_config }, { OMAP_TAG_UART, &palmtt_uart_config }, diff --git a/arch/arm/mach-omap1/board-palmz71.c b/arch/arm/mach-omap1/board-palmz71.c index 2e1dbfc28ef..156510777ff 100644 --- a/arch/arm/mach-omap1/board-palmz71.c +++ b/arch/arm/mach-omap1/board-palmz71.c @@ -285,7 +285,7 @@ static struct omap_uart_config palmz71_uart_config __initdata = { .enabled_uarts = (1 << 0) | (1 << 1) | (0 << 2), }; -static struct omap_board_config_kernel palmz71_config[] = { +static struct omap_board_config_kernel palmz71_config[] __initdata = { {OMAP_TAG_USB, &palmz71_usb_config}, {OMAP_TAG_MMC, &palmz71_mmc_config}, {OMAP_TAG_LCD, &palmz71_lcd_config}, diff --git a/arch/arm/mach-omap1/board-perseus2.c b/arch/arm/mach-omap1/board-perseus2.c index cafe91f06ab..94bc0745ab2 100644 --- a/arch/arm/mach-omap1/board-perseus2.c +++ b/arch/arm/mach-omap1/board-perseus2.c @@ -216,7 +216,7 @@ static struct omap_lcd_config perseus2_lcd_config __initdata = { .ctrl_name = "internal", }; -static struct omap_board_config_kernel perseus2_config[] = { +static struct omap_board_config_kernel perseus2_config[] __initdata = { { OMAP_TAG_UART, &perseus2_uart_config }, { OMAP_TAG_LCD, &perseus2_lcd_config }, }; diff --git a/arch/arm/mach-omap1/board-sx1.c b/arch/arm/mach-omap1/board-sx1.c index faa99b54c1e..1c7f09aedf0 100644 --- a/arch/arm/mach-omap1/board-sx1.c +++ b/arch/arm/mach-omap1/board-sx1.c @@ -268,21 +268,6 @@ static struct omap_mcbsp_reg_cfg mcbsp1_regs = { /* PCR0 =0f0f */ }; -/* TODO: PCM interface - McBSP2 */ -static struct omap_mcbsp_reg_cfg mcbsp2_regs = { - .spcr2 = FRST | GRST | XRST | XINTM(3), /* SPCR2=F1 */ - .spcr1 = RINTM(3) | RRST, /* SPCR1=30 */ - .rcr2 = 0, /* RCR2 =00 */ - .rcr1 = RFRLEN1(1) | RWDLEN1(OMAP_MCBSP_WORD_16), /* RCR1 = 140 */ - .xcr2 = 0, /* XCR2 = 0 */ - .xcr1 = XFRLEN1(1) | XWDLEN1(OMAP_MCBSP_WORD_16), /* XCR1 = 140 */ - .srgr1 = FWID(15) | CLKGDV(12), /* SRGR1=0f0c */ - .srgr2 = FSGM | FPER(31), /* SRGR2=101f */ - .pcr0 = FSXM | FSRM | CLKXM | CLKRM | FSXP | FSRP | CLKXP | CLKRP, - /* PCR0=0f0f */ - /* mcbsp: slave */ -}; - static struct omap_alsa_codec_config sx1_alsa_config = { .name = "SX1 EGold", .mcbsp_regs_alsa = &mcbsp1_regs, @@ -395,11 +380,8 @@ static struct omap_usb_config sx1_usb_config __initdata = { static struct omap_mmc_config sx1_mmc_config __initdata = { .mmc [0] = { - .enabled = 1, + .enabled = 1, .wire4 = 0, - .wp_pin = -1, - .power_pin = -1, /* power is in Sofia */ - .switch_pin = OMAP_MPUIO(3), }, }; @@ -428,13 +410,15 @@ static struct omap_uart_config sx1_uart_config __initdata = { .enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)), }; -static struct omap_board_config_kernel sx1_config[] = { +static struct omap_board_config_kernel sx1_config[] __initdata = { { OMAP_TAG_USB, &sx1_usb_config }, { OMAP_TAG_MMC, &sx1_mmc_config }, { OMAP_TAG_LCD, &sx1_lcd_config }, { OMAP_TAG_UART, &sx1_uart_config }, }; + /*-----------------------------------------*/ + static void __init omap_sx1_init(void) { platform_add_devices(sx1_devices, ARRAY_SIZE(sx1_devices)); diff --git a/arch/arm/mach-omap1/board-voiceblue.c b/arch/arm/mach-omap1/board-voiceblue.c index 02cac41aa5a..5c00b3f39cd 100644 --- a/arch/arm/mach-omap1/board-voiceblue.c +++ b/arch/arm/mach-omap1/board-voiceblue.c @@ -34,9 +34,6 @@ #include #include -extern void omap_init_time(void); -extern int omap_gpio_init(void); - static struct plat_serial8250_port voiceblue_ports[] = { { .mapbase = (unsigned long)(OMAP_CS1_PHYS + 0x40000), diff --git a/arch/arm/mach-omap1/mailbox.c b/arch/arm/mach-omap1/mailbox.c index d3abf560990..bad1e7152d8 100644 --- a/arch/arm/mach-omap1/mailbox.c +++ b/arch/arm/mach-omap1/mailbox.c @@ -51,7 +51,7 @@ static inline void mbox_write_reg(unsigned int val, unsigned int reg) } /* msg */ -static inline mbox_msg_t omap1_mbox_fifo_read(struct omap_mbox *mbox) +static mbox_msg_t omap1_mbox_fifo_read(struct omap_mbox *mbox) { struct omap_mbox1_fifo *fifo = &((struct omap_mbox1_priv *)mbox->priv)->rx_fifo; @@ -63,7 +63,7 @@ static inline mbox_msg_t omap1_mbox_fifo_read(struct omap_mbox *mbox) return msg; } -static inline void +static void omap1_mbox_fifo_write(struct omap_mbox *mbox, mbox_msg_t msg) { struct omap_mbox1_fifo *fifo = @@ -73,12 +73,12 @@ omap1_mbox_fifo_write(struct omap_mbox *mbox, mbox_msg_t msg) mbox_write_reg(msg >> 16, fifo->cmd); } -static inline int omap1_mbox_fifo_empty(struct omap_mbox *mbox) +static int omap1_mbox_fifo_empty(struct omap_mbox *mbox) { return 0; } -static inline int omap1_mbox_fifo_full(struct omap_mbox *mbox) +static int omap1_mbox_fifo_full(struct omap_mbox *mbox) { struct omap_mbox1_fifo *fifo = &((struct omap_mbox1_priv *)mbox->priv)->rx_fifo; @@ -87,21 +87,21 @@ static inline int omap1_mbox_fifo_full(struct omap_mbox *mbox) } /* irq */ -static inline void +static void omap1_mbox_enable_irq(struct omap_mbox *mbox, omap_mbox_type_t irq) { if (irq == IRQ_RX) enable_irq(mbox->irq); } -static inline void +static void omap1_mbox_disable_irq(struct omap_mbox *mbox, omap_mbox_type_t irq) { if (irq == IRQ_RX) disable_irq(mbox->irq); } -static inline int +static int omap1_mbox_is_irq(struct omap_mbox *mbox, omap_mbox_type_t irq) { if (irq == IRQ_TX) diff --git a/arch/arm/mach-omap1/pm.c b/arch/arm/mach-omap1/pm.c index 1a2a3715857..8eb5dcdaead 100644 --- a/arch/arm/mach-omap1/pm.c +++ b/arch/arm/mach-omap1/pm.c @@ -57,7 +57,6 @@ #include #include #include -#include #include static unsigned int arm_sleep_save[ARM_SLEEP_SAVE_SIZE]; -- cgit v1.2.3-70-g09d2 From f13fd3cc9147801bdf56f5964c58c9838a74dd47 Mon Sep 17 00:00:00 2001 From: Russell King Date: Thu, 7 Feb 2008 20:17:53 +0000 Subject: [ARM] pxa: remove debugging PM: printk Signed-off-by: Russell King --- arch/arm/mach-pxa/pxa3xx.c | 2 -- 1 file changed, 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-pxa/pxa3xx.c b/arch/arm/mach-pxa/pxa3xx.c index e47e67c11af..4b048b1e805 100644 --- a/arch/arm/mach-pxa/pxa3xx.c +++ b/arch/arm/mach-pxa/pxa3xx.c @@ -266,8 +266,6 @@ static void pxa3xx_cpu_standby(unsigned int pwrmode) AD2D0ER = 0; AD2D1ER = 0; - - printk("PM: AD2D0SR=%08x ASCR=%08x\n", AD2D0SR, ASCR); } /* -- cgit v1.2.3-70-g09d2 From 86260f987319fb526e920fbe317933e5b3a0691e Mon Sep 17 00:00:00 2001 From: Dmitry Krivoschekov Date: Fri, 8 Feb 2008 15:02:03 +0100 Subject: [ARM] 4824/1: pxa: clear RDH bit after any reset According to PXA300/310 and PXA320 Developer manuals, the ASCR[RDH] "bit needs to be cleared as part of the software initialization coming out of any reset and coming out of D3". The latter requirement is addressed by commit "c4d1fb627ff3072", as for the former (coming out of any reset), the kernel relies on boot loaders and assumes that RDH bit is cleared there. Though, not all bootloaders follow the rule so we have to clear the bit in kernel. We clear the RDH bit in pxa3xx_init() function since it is always invoked after any reset. We also preserve D1S, D2S and D3S bits from being cleared in case we invoke pxa3xx_init() function not from normal hardware reset (e.g. kexec scenario), so these bits can be properly referenced later. Signed-off-by: Dmitry Krivoschekov Signed-off-by: Russell King --- arch/arm/mach-pxa/pxa3xx.c | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-pxa/pxa3xx.c b/arch/arm/mach-pxa/pxa3xx.c index 4b048b1e805..7cd9ef8deb0 100644 --- a/arch/arm/mach-pxa/pxa3xx.c +++ b/arch/arm/mach-pxa/pxa3xx.c @@ -513,6 +513,14 @@ static int __init pxa3xx_init(void) int i, ret = 0; if (cpu_is_pxa3xx()) { + /* + * clear RDH bit every time after reset + * + * Note: the last 3 bits DxS are write-1-to-clear so carefully + * preserve them here in case they will be referenced later + */ + ASCR &= ~(ASCR_RDH | ASCR_D1S | ASCR_D2S | ASCR_D3S); + clks_register(pxa3xx_clks, ARRAY_SIZE(pxa3xx_clks)); if ((ret = pxa_init_dma(32))) -- cgit v1.2.3-70-g09d2 From 72e7ae8141fa98084383e167b77d4497a59e3e10 Mon Sep 17 00:00:00 2001 From: David Brownell Date: Wed, 6 Feb 2008 22:03:42 +0100 Subject: [ARM] 4823/1: AT91 section fix Fix section warning: WARNING: arch/arm/mach-at91/built-in.o(.text+0xd74): Section mismatch in reference from the function init_programmable_clock() to the function .init.text:at91_css_to_clk() The function init_programmable_clock() references the function __init at91_css_to_clk(). This is often because init_programmable_clock lacks a __init annotation or the annotation of at91_css_to_clk is wrong. In this case the only calls to and from init_programmable_clock() are from code marked as "__init", so this fix is trivially correct. Signed-off-by: David Brownell Acked-by: Uwe Kleine-Knig Signed-off-by: Russell King --- arch/arm/mach-at91/clock.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-at91/clock.c b/arch/arm/mach-at91/clock.c index ec76eeaafd4..de6424e9ac0 100644 --- a/arch/arm/mach-at91/clock.c +++ b/arch/arm/mach-at91/clock.c @@ -343,7 +343,7 @@ int clk_set_parent(struct clk *clk, struct clk *parent) EXPORT_SYMBOL(clk_set_parent); /* establish PCK0..PCK3 parentage and rate */ -static void init_programmable_clock(struct clk *clk) +static void __init init_programmable_clock(struct clk *clk) { struct clk *parent; u32 pckr; -- cgit v1.2.3-70-g09d2 From 2ffd6e182c4b9ae7bebc385c021e7d083bab406a Mon Sep 17 00:00:00 2001 From: Jan Engelhardt Date: Tue, 22 Jan 2008 20:41:07 +0100 Subject: [ARM] constify function pointer tables Signed-off-by: Jan Engelhardt Signed-off-by: Russell King --- arch/arm/kernel/setup.c | 2 +- arch/arm/mach-davinci/clock.c | 4 ++-- 2 files changed, 3 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c index d3941a7b045..b7b0720bc1b 100644 --- a/arch/arm/kernel/setup.c +++ b/arch/arm/kernel/setup.c @@ -1001,7 +1001,7 @@ static void c_stop(struct seq_file *m, void *v) { } -struct seq_operations cpuinfo_op = { +const struct seq_operations cpuinfo_op = { .start = c_start, .next = c_next, .stop = c_stop, diff --git a/arch/arm/mach-davinci/clock.c b/arch/arm/mach-davinci/clock.c index 139ceaa35e2..4143828a968 100644 --- a/arch/arm/mach-davinci/clock.c +++ b/arch/arm/mach-davinci/clock.c @@ -290,7 +290,7 @@ static int davinci_ck_show(struct seq_file *m, void *v) return 0; } -static struct seq_operations davinci_ck_op = { +static const struct seq_operations davinci_ck_op = { .start = davinci_ck_start, .next = davinci_ck_next, .stop = davinci_ck_stop, @@ -302,7 +302,7 @@ static int davinci_ck_open(struct inode *inode, struct file *file) return seq_open(file, &davinci_ck_op); } -static struct file_operations proc_davinci_ck_operations = { +static const struct file_operations proc_davinci_ck_operations = { .open = davinci_ck_open, .read = seq_read, .llseek = seq_lseek, -- cgit v1.2.3-70-g09d2