From 10d48b3934940c178635413b5128c33bc17abe1d Mon Sep 17 00:00:00 2001 From: Mika Westerberg Date: Tue, 12 Oct 2010 10:37:59 +0100 Subject: ARM: 6440/1: ep93xx: DMA: fix channel_disable When channel_disable() is called, it disables per channel interrupts and waits until channels state becomes STATE_STALL, and then disables the channel. Now, if the DMA transfer is disabled while the channel is in STATE_NEXT we will not wait anything and disable the channel immediately. This seems to cause weird data corruption for example in audio transfers. Fix is to wait while we are in STATE_NEXT or STATE_ON and only then disable the channel. Signed-off-by: Mika Westerberg Acked-by: Ryan Mallon Signed-off-by: Russell King --- arch/arm/mach-ep93xx/dma-m2p.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-ep93xx/dma-m2p.c b/arch/arm/mach-ep93xx/dma-m2p.c index 8904ca4e2e2..a696d354b1f 100644 --- a/arch/arm/mach-ep93xx/dma-m2p.c +++ b/arch/arm/mach-ep93xx/dma-m2p.c @@ -276,7 +276,7 @@ static void channel_disable(struct m2p_channel *ch) v &= ~(M2P_CONTROL_STALL_IRQ_EN | M2P_CONTROL_NFB_IRQ_EN); m2p_set_control(ch, v); - while (m2p_channel_state(ch) == STATE_ON) + while (m2p_channel_state(ch) >= STATE_ON) cpu_relax(); m2p_set_control(ch, 0x0); -- cgit v1.2.3-70-g09d2