From e227867f12302633737bd2a48a10a9a72c0630cb Mon Sep 17 00:00:00 2001 From: Masanari Iida Date: Tue, 18 Feb 2014 22:54:36 +0900 Subject: treewide: Fix typo in Documentation/DocBook This patch fix spelling typo in Documentation/DocBook. It is because .html and .xml files are generated by make htmldocs, I have to fix a typo within the source files. Signed-off-by: Masanari Iida Acked-by: Randy Dunlap Signed-off-by: Jiri Kosina --- arch/s390/include/asm/cio.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/s390/include/asm/cio.h b/arch/s390/include/asm/cio.h index d42625053c3..09633920776 100644 --- a/arch/s390/include/asm/cio.h +++ b/arch/s390/include/asm/cio.h @@ -199,7 +199,7 @@ struct esw_eadm { /** * struct irb - interruption response block * @scsw: subchannel status word - * @esw: extened status word + * @esw: extended status word * @ecw: extended control word * * The irb that is handed to the device driver when an interrupt occurs. For -- cgit v1.2.3-70-g09d2 From c7dcec7dd463907c451048b04f30d1870fe5cacc Mon Sep 17 00:00:00 2001 From: Paul Bolle Date: Tue, 11 Feb 2014 13:38:47 +0100 Subject: Kconfig: Remove useless "default N" lines A number of Kconfig entries default to (uppercase) "N". It was clearly intended to use "default n". But since (lowercase) "n" is the default anyway, these lines might as well be removed. Signed-off-by: Paul Bolle Signed-off-by: Jiri Kosina --- arch/arc/Kconfig | 1 - arch/cris/arch-v32/drivers/Kconfig | 2 -- drivers/misc/mic/Kconfig | 2 -- drivers/staging/android/Kconfig | 2 -- drivers/staging/bcm/Kconfig | 1 - drivers/staging/frontier/Kconfig | 1 - drivers/staging/media/go7007/Kconfig | 3 --- drivers/staging/rtl8187se/Kconfig | 1 - drivers/staging/rtl8188eu/Kconfig | 1 - drivers/staging/rtl8192e/rtl8192e/Kconfig | 1 - drivers/staging/rtl8192u/Kconfig | 1 - drivers/staging/rtl8712/Kconfig | 2 -- drivers/staging/usbip/Kconfig | 4 ---- drivers/usb/core/Kconfig | 1 - drivers/usb/host/Kconfig | 3 --- 15 files changed, 26 deletions(-) (limited to 'arch') diff --git a/arch/arc/Kconfig b/arch/arc/Kconfig index 9063ae6553c..3d7f1137a21 100644 --- a/arch/arc/Kconfig +++ b/arch/arc/Kconfig @@ -356,7 +356,6 @@ config ARC_CURR_IN_REG config ARC_MISALIGN_ACCESS bool "Emulate unaligned memory access (userspace only)" - default N select SYSCTL_ARCH_UNALIGN_NO_WARN select SYSCTL_ARCH_UNALIGN_ALLOW help diff --git a/arch/cris/arch-v32/drivers/Kconfig b/arch/cris/arch-v32/drivers/Kconfig index 6792503aaf7..15a9ed1d579 100644 --- a/arch/cris/arch-v32/drivers/Kconfig +++ b/arch/cris/arch-v32/drivers/Kconfig @@ -11,7 +11,6 @@ config ETRAX_ETHERNET config ETRAX_NO_PHY bool "PHY not present" depends on ETRAX_ETHERNET - default N help This option disables all MDIO communication with an ethernet transceiver connected to the MII interface. This option shall @@ -116,7 +115,6 @@ config ETRAX_AXISFLASHMAP config ETRAX_AXISFLASHMAP_MTD0WHOLE bool "MTD0 is whole boot flash device" depends on ETRAX_AXISFLASHMAP - default N help When this option is not set, mtd0 refers to the first partition on the boot flash device. When set, mtd0 refers to the whole diff --git a/drivers/misc/mic/Kconfig b/drivers/misc/mic/Kconfig index e42b331edbc..462a5b1d865 100644 --- a/drivers/misc/mic/Kconfig +++ b/drivers/misc/mic/Kconfig @@ -4,7 +4,6 @@ config INTEL_MIC_HOST tristate "Intel MIC Host Driver" depends on 64BIT && PCI && X86 select VHOST_RING - default N help This enables Host Driver support for the Intel Many Integrated Core (MIC) family of PCIe form factor coprocessor devices that @@ -25,7 +24,6 @@ config INTEL_MIC_CARD tristate "Intel MIC Card Driver" depends on 64BIT && X86 select VIRTIO - default N help This enables card driver support for the Intel Many Integrated Core (MIC) device family. The card driver communicates shutdown/ diff --git a/drivers/staging/android/Kconfig b/drivers/staging/android/Kconfig index 1e9ab6dfc90..22cf17dcb7d 100644 --- a/drivers/staging/android/Kconfig +++ b/drivers/staging/android/Kconfig @@ -2,7 +2,6 @@ menu "Android" config ANDROID bool "Android Drivers" - default N ---help--- Enable support for various drivers needed on the Android platform @@ -60,7 +59,6 @@ config ANDROID_TIMED_GPIO config ANDROID_LOW_MEMORY_KILLER bool "Android Low Memory Killer" - default N ---help--- Registers processes to be killed when memory is low diff --git a/drivers/staging/bcm/Kconfig b/drivers/staging/bcm/Kconfig index 83c9752504d..8acf4b24a7c 100644 --- a/drivers/staging/bcm/Kconfig +++ b/drivers/staging/bcm/Kconfig @@ -1,7 +1,6 @@ config BCM_WIMAX tristate "Beceem BCS200/BCS220-3 and BCSM250 wimax support" depends on USB && NET - default N help This is an experimental driver for the Beceem WIMAX chipset used by Sprint 4G. diff --git a/drivers/staging/frontier/Kconfig b/drivers/staging/frontier/Kconfig index 7121853bd39..4da290b2f5b 100644 --- a/drivers/staging/frontier/Kconfig +++ b/drivers/staging/frontier/Kconfig @@ -1,6 +1,5 @@ config TRANZPORT tristate "Frontier Tranzport and Alphatrack support" depends on USB - default N ---help--- Enable support for the Frontier Tranzport and Alphatrack devices. diff --git a/drivers/staging/media/go7007/Kconfig b/drivers/staging/media/go7007/Kconfig index 04bd0fba7b1..95a3af644a9 100644 --- a/drivers/staging/media/go7007/Kconfig +++ b/drivers/staging/media/go7007/Kconfig @@ -13,7 +13,6 @@ config VIDEO_GO7007 select VIDEO_TW9906 if MEDIA_SUBDRV_AUTOSELECT select VIDEO_OV7640 if MEDIA_SUBDRV_AUTOSELECT select VIDEO_UDA1342 if MEDIA_SUBDRV_AUTOSELECT - default N ---help--- This is a video4linux driver for the WIS GO7007 MPEG encoder chip. @@ -24,7 +23,6 @@ config VIDEO_GO7007 config VIDEO_GO7007_USB tristate "WIS GO7007 USB support" depends on VIDEO_GO7007 && USB - default N ---help--- This is a video4linux driver for the WIS GO7007 MPEG encoder chip over USB. @@ -46,7 +44,6 @@ config VIDEO_GO7007_LOADER config VIDEO_GO7007_USB_S2250_BOARD tristate "Sensoray 2250/2251 support" depends on VIDEO_GO7007_USB && USB - default N ---help--- This is a video4linux driver for the Sensoray 2250/2251 device. diff --git a/drivers/staging/rtl8187se/Kconfig b/drivers/staging/rtl8187se/Kconfig index 3162aabbeb0..ff8d41ebca3 100644 --- a/drivers/staging/rtl8187se/Kconfig +++ b/drivers/staging/rtl8187se/Kconfig @@ -6,6 +6,5 @@ config R8187SE select WEXT_PRIV select EEPROM_93CX6 select CRYPTO - default N ---help--- If built as a module, it will be called r8187se.ko. diff --git a/drivers/staging/rtl8188eu/Kconfig b/drivers/staging/rtl8188eu/Kconfig index c9c548f1749..70fecfabc0c 100644 --- a/drivers/staging/rtl8188eu/Kconfig +++ b/drivers/staging/rtl8188eu/Kconfig @@ -3,7 +3,6 @@ config R8188EU depends on WLAN && USB select WIRELESS_EXT select WEXT_PRIV - default N ---help--- This option adds the Realtek RTL8188EU USB device such as TP-Link TL-WN725N. If built as a module, it will be called r8188eu. diff --git a/drivers/staging/rtl8192e/rtl8192e/Kconfig b/drivers/staging/rtl8192e/rtl8192e/Kconfig index 50e0d91a409..ad82bc348a7 100644 --- a/drivers/staging/rtl8192e/rtl8192e/Kconfig +++ b/drivers/staging/rtl8192e/rtl8192e/Kconfig @@ -5,5 +5,4 @@ config RTL8192E select WIRELESS_EXT select WEXT_PRIV select CRYPTO - default N ---help--- diff --git a/drivers/staging/rtl8192u/Kconfig b/drivers/staging/rtl8192u/Kconfig index 3f055091b35..3ee9d0d00fb 100644 --- a/drivers/staging/rtl8192u/Kconfig +++ b/drivers/staging/rtl8192u/Kconfig @@ -5,5 +5,4 @@ config RTL8192U select WIRELESS_EXT select WEXT_PRIV select CRYPTO - default N ---help--- diff --git a/drivers/staging/rtl8712/Kconfig b/drivers/staging/rtl8712/Kconfig index 6a43312380e..f160eee52f0 100644 --- a/drivers/staging/rtl8712/Kconfig +++ b/drivers/staging/rtl8712/Kconfig @@ -4,7 +4,6 @@ config R8712U select WIRELESS_EXT select WEXT_PRIV select FW_LOADER - default N ---help--- This option adds the Realtek RTL8712 USB device such as the D-Link DWA-130. If built as a module, it will be called r8712u. @@ -12,7 +11,6 @@ config R8712U config R8712_TX_AGGR bool "Realtek RTL8712U Transmit Aggregation code" depends on R8712U && BROKEN - default N ---help--- This option provides transmit aggregation for the Realtek RTL8712 USB device. diff --git a/drivers/staging/usbip/Kconfig b/drivers/staging/usbip/Kconfig index 88600098047..bd99e9e47e5 100644 --- a/drivers/staging/usbip/Kconfig +++ b/drivers/staging/usbip/Kconfig @@ -1,7 +1,6 @@ config USBIP_CORE tristate "USB/IP support" depends on USB && NET - default N ---help--- This enables pushing USB packets over IP to allow remote machines direct access to USB devices. It provides the @@ -18,7 +17,6 @@ config USBIP_CORE config USBIP_VHCI_HCD tristate "VHCI hcd" depends on USBIP_CORE - default N ---help--- This enables the USB/IP virtual host controller driver, which is run on the remote machine. @@ -29,7 +27,6 @@ config USBIP_VHCI_HCD config USBIP_HOST tristate "Host driver" depends on USBIP_CORE - default N ---help--- This enables the USB/IP host driver, which is run on the machine that is sharing the USB devices. @@ -40,6 +37,5 @@ config USBIP_HOST config USBIP_DEBUG bool "Debug messages for USB/IP" depends on USBIP_CORE - default N ---help--- This enables the debug messages from the USB/IP drivers. diff --git a/drivers/usb/core/Kconfig b/drivers/usb/core/Kconfig index fed7f68d025..cb8e99156f5 100644 --- a/drivers/usb/core/Kconfig +++ b/drivers/usb/core/Kconfig @@ -10,7 +10,6 @@ config USB_DEBUG config USB_ANNOUNCE_NEW_DEVICES bool "USB announce new devices" - default N help Say Y here if you want the USB core to always announce the idVendor, idProduct, Manufacturer, Product, and SerialNumber diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig index a9707da7da0..c8b4161613c 100644 --- a/drivers/usb/host/Kconfig +++ b/drivers/usb/host/Kconfig @@ -314,7 +314,6 @@ config USB_ISP1760_HCD config USB_ISP1362_HCD tristate "ISP1362 HCD support" - default N ---help--- Supports the Philips ISP1362 chip as a host controller @@ -326,7 +325,6 @@ config USB_ISP1362_HCD config USB_FUSBH200_HCD tristate "FUSBH200 HCD support" depends on USB - default N ---help--- Faraday FUSBH200 is designed to meet USB2.0 EHCI specification with minor modification. @@ -337,7 +335,6 @@ config USB_FUSBH200_HCD config USB_FOTG210_HCD tristate "FOTG210 HCD support" depends on USB - default N ---help--- Faraday FOTG210 is an OTG controller which can be configured as an USB2.0 host. It is designed to meet USB2.0 EHCI specification -- cgit v1.2.3-70-g09d2 From e4556c0f35a9b3c179003c35084f3232c43c6109 Mon Sep 17 00:00:00 2001 From: Paul Bolle Date: Sun, 9 Mar 2014 22:41:46 +0100 Subject: ARM: spear: clean up editing mistake Clean up an obvious editing mistake introduced by commit 4b6effb6ff38 ("ARM: spear: merge Kconfig files"). Signed-off-by: Paul Bolle Acked-by: Viresh Kumar Signed-off-by: Jiri Kosina --- arch/arm/mach-spear/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-spear/Kconfig b/arch/arm/mach-spear/Kconfig index ac1710e64d9..308d5b5b305 100644 --- a/arch/arm/mach-spear/Kconfig +++ b/arch/arm/mach-spear/Kconfig @@ -92,7 +92,7 @@ config MACH_SPEAR600 depends on ARCH_SPEAR6XX select USE_OF help - Supports ST SPEAr600 boards configured via the device-treesource "arch/arm/mach-spear6xx/Kconfig" + Supports ST SPEAr600 boards configured via the device-tree config ARCH_SPEAR_AUTO def_bool PLAT_SPEAR_SINGLE -- cgit v1.2.3-70-g09d2