From 15f6527e8e63e793f8ab1ddce4ed3c487ebd0d42 Mon Sep 17 00:00:00 2001 From: Josh Boyer Date: Mon, 20 Aug 2007 07:27:07 -0500 Subject: [POWERPC] Rename 4xx paths to 40x 4xx is a bit of a misnomer for certain things, as they really apply to PowerPC 40x only. Rename some of the files to clean this up. Signed-off-by: Josh Boyer Acked-by: David Gibson --- arch/powerpc/Makefile | 2 +- arch/powerpc/kernel/Makefile | 2 +- arch/powerpc/kernel/head_40x.S | 1021 +++++++++++++++++++++++++++++++++++ arch/powerpc/kernel/head_4xx.S | 1021 ----------------------------------- arch/powerpc/mm/40x_mmu.c | 135 +++++ arch/powerpc/mm/4xx_mmu.c | 135 ----- arch/powerpc/mm/Makefile | 2 +- arch/powerpc/platforms/40x/Kconfig | 208 +++++++ arch/powerpc/platforms/40x/Makefile | 1 + arch/powerpc/platforms/4xx/Kconfig | 208 ------- arch/powerpc/platforms/4xx/Makefile | 1 - 11 files changed, 1368 insertions(+), 1368 deletions(-) create mode 100644 arch/powerpc/kernel/head_40x.S delete mode 100644 arch/powerpc/kernel/head_4xx.S create mode 100644 arch/powerpc/mm/40x_mmu.c delete mode 100644 arch/powerpc/mm/4xx_mmu.c create mode 100644 arch/powerpc/platforms/40x/Kconfig create mode 100644 arch/powerpc/platforms/40x/Makefile delete mode 100644 arch/powerpc/platforms/4xx/Kconfig delete mode 100644 arch/powerpc/platforms/4xx/Makefile (limited to 'arch') diff --git a/arch/powerpc/Makefile b/arch/powerpc/Makefile index 6c1e36c33fa..8e59c0c405a 100644 --- a/arch/powerpc/Makefile +++ b/arch/powerpc/Makefile @@ -123,7 +123,7 @@ CFLAGS += $(cpu-as-y) head-y := arch/powerpc/kernel/head_32.o head-$(CONFIG_PPC64) := arch/powerpc/kernel/head_64.o head-$(CONFIG_8xx) := arch/powerpc/kernel/head_8xx.o -head-$(CONFIG_4xx) := arch/powerpc/kernel/head_4xx.o +head-$(CONFIG_40x) := arch/powerpc/kernel/head_40x.o head-$(CONFIG_44x) := arch/powerpc/kernel/head_44x.o head-$(CONFIG_FSL_BOOKE) := arch/powerpc/kernel/head_fsl_booke.o diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile index b0cb2e662c2..a4850dd8764 100644 --- a/arch/powerpc/kernel/Makefile +++ b/arch/powerpc/kernel/Makefile @@ -46,7 +46,7 @@ ifeq ($(CONFIG_PPC_MERGE),y) extra-$(CONFIG_PPC_STD_MMU) := head_32.o extra-$(CONFIG_PPC64) := head_64.o -extra-$(CONFIG_40x) := head_4xx.o +extra-$(CONFIG_40x) := head_40x.o extra-$(CONFIG_44x) := head_44x.o extra-$(CONFIG_FSL_BOOKE) := head_fsl_booke.o extra-$(CONFIG_8xx) := head_8xx.o diff --git a/arch/powerpc/kernel/head_40x.S b/arch/powerpc/kernel/head_40x.S new file mode 100644 index 00000000000..adc7f8097cd --- /dev/null +++ b/arch/powerpc/kernel/head_40x.S @@ -0,0 +1,1021 @@ +/* + * Copyright (c) 1995-1996 Gary Thomas + * Initial PowerPC version. + * Copyright (c) 1996 Cort Dougan + * Rewritten for PReP + * Copyright (c) 1996 Paul Mackerras + * Low-level exception handers, MMU support, and rewrite. + * Copyright (c) 1997 Dan Malek + * PowerPC 8xx modifications. + * Copyright (c) 1998-1999 TiVo, Inc. + * PowerPC 403GCX modifications. + * Copyright (c) 1999 Grant Erickson + * PowerPC 403GCX/405GP modifications. + * Copyright 2000 MontaVista Software Inc. + * PPC405 modifications + * PowerPC 403GCX/405GP modifications. + * Author: MontaVista Software, Inc. + * frank_rowand@mvista.com or source@mvista.com + * debbie_chu@mvista.com + * + * + * Module name: head_4xx.S + * + * Description: + * Kernel execution entry point code. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* As with the other PowerPC ports, it is expected that when code + * execution begins here, the following registers contain valid, yet + * optional, information: + * + * r3 - Board info structure pointer (DRAM, frequency, MAC address, etc.) + * r4 - Starting address of the init RAM disk + * r5 - Ending address of the init RAM disk + * r6 - Start of kernel command line string (e.g. "mem=96m") + * r7 - End of kernel command line string + * + * This is all going to change RSN when we add bi_recs....... -- Dan + */ + .text +_GLOBAL(_stext) +_GLOBAL(_start) + + /* Save parameters we are passed. + */ + mr r31,r3 + mr r30,r4 + mr r29,r5 + mr r28,r6 + mr r27,r7 + + /* We have to turn on the MMU right away so we get cache modes + * set correctly. + */ + bl initial_mmu + +/* We now have the lower 16 Meg mapped into TLB entries, and the caches + * ready to work. + */ +turn_on_mmu: + lis r0,MSR_KERNEL@h + ori r0,r0,MSR_KERNEL@l + mtspr SPRN_SRR1,r0 + lis r0,start_here@h + ori r0,r0,start_here@l + mtspr SPRN_SRR0,r0 + SYNC + rfi /* enables MMU */ + b . /* prevent prefetch past rfi */ + +/* + * This area is used for temporarily saving registers during the + * critical exception prolog. + */ + . = 0xc0 +crit_save: +_GLOBAL(crit_r10) + .space 4 +_GLOBAL(crit_r11) + .space 4 + +/* + * Exception vector entry code. This code runs with address translation + * turned off (i.e. using physical addresses). We assume SPRG3 has the + * physical address of the current task thread_struct. + * Note that we have to have decremented r1 before we write to any fields + * of the exception frame, since a critical interrupt could occur at any + * time, and it will write to the area immediately below the current r1. + */ +#define NORMAL_EXCEPTION_PROLOG \ + mtspr SPRN_SPRG0,r10; /* save two registers to work with */\ + mtspr SPRN_SPRG1,r11; \ + mtspr SPRN_SPRG2,r1; \ + mfcr r10; /* save CR in r10 for now */\ + mfspr r11,SPRN_SRR1; /* check whether user or kernel */\ + andi. r11,r11,MSR_PR; \ + beq 1f; \ + mfspr r1,SPRN_SPRG3; /* if from user, start at top of */\ + lwz r1,THREAD_INFO-THREAD(r1); /* this thread's kernel stack */\ + addi r1,r1,THREAD_SIZE; \ +1: subi r1,r1,INT_FRAME_SIZE; /* Allocate an exception frame */\ + tophys(r11,r1); \ + stw r10,_CCR(r11); /* save various registers */\ + stw r12,GPR12(r11); \ + stw r9,GPR9(r11); \ + mfspr r10,SPRN_SPRG0; \ + stw r10,GPR10(r11); \ + mfspr r12,SPRN_SPRG1; \ + stw r12,GPR11(r11); \ + mflr r10; \ + stw r10,_LINK(r11); \ + mfspr r10,SPRN_SPRG2; \ + mfspr r12,SPRN_SRR0; \ + stw r10,GPR1(r11); \ + mfspr r9,SPRN_SRR1; \ + stw r10,0(r11); \ + rlwinm r9,r9,0,14,12; /* clear MSR_WE (necessary?) */\ + stw r0,GPR0(r11); \ + SAVE_4GPRS(3, r11); \ + SAVE_2GPRS(7, r11) + +/* + * Exception prolog for critical exceptions. This is a little different + * from the normal exception prolog above since a critical exception + * can potentially occur at any point during normal exception processing. + * Thus we cannot use the same SPRG registers as the normal prolog above. + * Instead we use a couple of words of memory at low physical addresses. + * This is OK since we don't support SMP on these processors. + */ +#define CRITICAL_EXCEPTION_PROLOG \ + stw r10,crit_r10@l(0); /* save two registers to work with */\ + stw r11,crit_r11@l(0); \ + mfcr r10; /* save CR in r10 for now */\ + mfspr r11,SPRN_SRR3; /* check whether user or kernel */\ + andi. r11,r11,MSR_PR; \ + lis r11,critical_stack_top@h; \ + ori r11,r11,critical_stack_top@l; \ + beq 1f; \ + /* COMING FROM USER MODE */ \ + mfspr r11,SPRN_SPRG3; /* if from user, start at top of */\ + lwz r11,THREAD_INFO-THREAD(r11); /* this thread's kernel stack */\ + addi r11,r11,THREAD_SIZE; \ +1: subi r11,r11,INT_FRAME_SIZE; /* Allocate an exception frame */\ + tophys(r11,r11); \ + stw r10,_CCR(r11); /* save various registers */\ + stw r12,GPR12(r11); \ + stw r9,GPR9(r11); \ + mflr r10; \ + stw r10,_LINK(r11); \ + mfspr r12,SPRN_DEAR; /* save DEAR and ESR in the frame */\ + stw r12,_DEAR(r11); /* since they may have had stuff */\ + mfspr r9,SPRN_ESR; /* in them at the point where the */\ + stw r9,_ESR(r11); /* exception was taken */\ + mfspr r12,SPRN_SRR2; \ + stw r1,GPR1(r11); \ + mfspr r9,SPRN_SRR3; \ + stw r1,0(r11); \ + tovirt(r1,r11); \ + rlwinm r9,r9,0,14,12; /* clear MSR_WE (necessary?) */\ + stw r0,GPR0(r11); \ + SAVE_4GPRS(3, r11); \ + SAVE_2GPRS(7, r11) + + /* + * State at this point: + * r9 saved in stack frame, now saved SRR3 & ~MSR_WE + * r10 saved in crit_r10 and in stack frame, trashed + * r11 saved in crit_r11 and in stack frame, + * now phys stack/exception frame pointer + * r12 saved in stack frame, now saved SRR2 + * CR saved in stack frame, CR0.EQ = !SRR3.PR + * LR, DEAR, ESR in stack frame + * r1 saved in stack frame, now virt stack/excframe pointer + * r0, r3-r8 saved in stack frame + */ + +/* + * Exception vectors. + */ +#define START_EXCEPTION(n, label) \ + . = n; \ +label: + +#define EXCEPTION(n, label, hdlr, xfer) \ + START_EXCEPTION(n, label); \ + NORMAL_EXCEPTION_PROLOG; \ + addi r3,r1,STACK_FRAME_OVERHEAD; \ + xfer(n, hdlr) + +#define CRITICAL_EXCEPTION(n, label, hdlr) \ + START_EXCEPTION(n, label); \ + CRITICAL_EXCEPTION_PROLOG; \ + addi r3,r1,STACK_FRAME_OVERHEAD; \ + EXC_XFER_TEMPLATE(hdlr, n+2, (MSR_KERNEL & ~(MSR_ME|MSR_DE|MSR_CE)), \ + NOCOPY, crit_transfer_to_handler, \ + ret_from_crit_exc) + +#define EXC_XFER_TEMPLATE(hdlr, trap, msr, copyee, tfer, ret) \ + li r10,trap; \ + stw r10,_TRAP(r11); \ + lis r10,msr@h; \ + ori r10,r10,msr@l; \ + copyee(r10, r9); \ + bl tfer; \ + .long hdlr; \ + .long ret + +#define COPY_EE(d, s) rlwimi d,s,0,16,16 +#define NOCOPY(d, s) + +#define EXC_XFER_STD(n, hdlr) \ + EXC_XFER_TEMPLATE(hdlr, n, MSR_KERNEL, NOCOPY, transfer_to_handler_full, \ + ret_from_except_full) + +#define EXC_XFER_LITE(n, hdlr) \ + EXC_XFER_TEMPLATE(hdlr, n+1, MSR_KERNEL, NOCOPY, transfer_to_handler, \ + ret_from_except) + +#define EXC_XFER_EE(n, hdlr) \ + EXC_XFER_TEMPLATE(hdlr, n, MSR_KERNEL, COPY_EE, transfer_to_handler_full, \ + ret_from_except_full) + +#define EXC_XFER_EE_LITE(n, hdlr) \ + EXC_XFER_TEMPLATE(hdlr, n+1, MSR_KERNEL, COPY_EE, transfer_to_handler, \ + ret_from_except) + + +/* + * 0x0100 - Critical Interrupt Exception + */ + CRITICAL_EXCEPTION(0x0100, CriticalInterrupt, unknown_exception) + +/* + * 0x0200 - Machine Check Exception + */ + CRITICAL_EXCEPTION(0x0200, MachineCheck, machine_check_exception) + +/* + * 0x0300 - Data Storage Exception + * This happens for just a few reasons. U0 set (but we don't do that), + * or zone protection fault (user violation, write to protected page). + * If this is just an update of modified status, we do that quickly + * and exit. Otherwise, we call heavywight functions to do the work. + */ + START_EXCEPTION(0x0300, DataStorage) + mtspr SPRN_SPRG0, r10 /* Save some working registers */ + mtspr SPRN_SPRG1, r11 +#ifdef CONFIG_403GCX + stw r12, 0(r0) + stw r9, 4(r0) + mfcr r11 + mfspr r12, SPRN_PID + stw r11, 8(r0) + stw r12, 12(r0) +#else + mtspr SPRN_SPRG4, r12 + mtspr SPRN_SPRG5, r9 + mfcr r11 + mfspr r12, SPRN_PID + mtspr SPRN_SPRG7, r11 + mtspr SPRN_SPRG6, r12 +#endif + + /* First, check if it was a zone fault (which means a user + * tried to access a kernel or read-protected page - always + * a SEGV). All other faults here must be stores, so no + * need to check ESR_DST as well. */ + mfspr r10, SPRN_ESR + andis. r10, r10, ESR_DIZ@h + bne 2f + + mfspr r10, SPRN_DEAR /* Get faulting address */ + + /* If we are faulting a kernel address, we have to use the + * kernel page tables. + */ + lis r11, TASK_SIZE@h + cmplw r10, r11 + blt+ 3f + lis r11, swapper_pg_dir@h + ori r11, r11, swapper_pg_dir@l + li r9, 0 + mtspr SPRN_PID, r9 /* TLB will have 0 TID */ + b 4f + + /* Get the PGD for the current thread. + */ +3: + mfspr r11,SPRN_SPRG3 + lwz r11,PGDIR(r11) +4: + tophys(r11, r11) + rlwimi r11, r10, 12, 20, 29 /* Create L1 (pgdir/pmd) address */ + lwz r11, 0(r11) /* Get L1 entry */ + rlwinm. r12, r11, 0, 0, 19 /* Extract L2 (pte) base address */ + beq 2f /* Bail if no table */ + + rlwimi r12, r10, 22, 20, 29 /* Compute PTE address */ + lwz r11, 0(r12) /* Get Linux PTE */ + + andi. r9, r11, _PAGE_RW /* Is it writeable? */ + beq 2f /* Bail if not */ + + /* Update 'changed'. + */ + ori r11, r11, _PAGE_DIRTY|_PAGE_ACCESSED|_PAGE_HWWRITE + stw r11, 0(r12) /* Update Linux page table */ + + /* Most of the Linux PTE is ready to load into the TLB LO. + * We set ZSEL, where only the LS-bit determines user access. + * We set execute, because we don't have the granularity to + * properly set this at the page level (Linux problem). + * If shared is set, we cause a zero PID->TID load. + * Many of these bits are software only. Bits we don't set + * here we (properly should) assume have the appropriate value. + */ + li r12, 0x0ce2 + andc r11, r11, r12 /* Make sure 20, 21 are zero */ + + /* find the TLB index that caused the fault. It has to be here. + */ + tlbsx r9, 0, r10 + + tlbwe r11, r9, TLB_DATA /* Load TLB LO */ + + /* Done...restore registers and get out of here. + */ +#ifdef CONFIG_403GCX + lwz r12, 12(r0) + lwz r11, 8(r0) + mtspr SPRN_PID, r12 + mtcr r11 + lwz r9, 4(r0) + lwz r12, 0(r0) +#else + mfspr r12, SPRN_SPRG6 + mfspr r11, SPRN_SPRG7 + mtspr SPRN_PID, r12 + mtcr r11 + mfspr r9, SPRN_SPRG5 + mfspr r12, SPRN_SPRG4 +#endif + mfspr r11, SPRN_SPRG1 + mfspr r10, SPRN_SPRG0 + PPC405_ERR77_SYNC + rfi /* Should sync shadow TLBs */ + b . /* prevent prefetch past rfi */ + +2: + /* The bailout. Restore registers to pre-exception conditions + * and call the heavyweights to help us out. + */ +#ifdef CONFIG_403GCX + lwz r12, 12(r0) + lwz r11, 8(r0) + mtspr SPRN_PID, r12 + mtcr r11 + lwz r9, 4(r0) + lwz r12, 0(r0) +#else + mfspr r12, SPRN_SPRG6 + mfspr r11, SPRN_SPRG7 + mtspr SPRN_PID, r12 + mtcr r11 + mfspr r9, SPRN_SPRG5 + mfspr r12, SPRN_SPRG4 +#endif + mfspr r11, SPRN_SPRG1 + mfspr r10, SPRN_SPRG0 + b DataAccess + +/* + * 0x0400 - Instruction Storage Exception + * This is caused by a fetch from non-execute or guarded pages. + */ + START_EXCEPTION(0x0400, InstructionAccess) + NORMAL_EXCEPTION_PROLOG + mr r4,r12 /* Pass SRR0 as arg2 */ + li r5,0 /* Pass zero as arg3 */ + EXC_XFER_EE_LITE(0x400, handle_page_fault) + +/* 0x0500 - External Interrupt Exception */ + EXCEPTION(0x0500, HardwareInterrupt, do_IRQ, EXC_XFER_LITE) + +/* 0x0600 - Alignment Exception */ + START_EXCEPTION(0x0600, Alignment) + NORMAL_EXCEPTION_PROLOG + mfspr r4,SPRN_DEAR /* Grab the DEAR and save it */ + stw r4,_DEAR(r11) + addi r3,r1,STACK_FRAME_OVERHEAD + EXC_XFER_EE(0x600, alignment_exception) + +/* 0x0700 - Program Exception */ + START_EXCEPTION(0x0700, ProgramCheck) + NORMAL_EXCEPTION_PROLOG + mfspr r4,SPRN_ESR /* Grab the ESR and save it */ + stw r4,_ESR(r11) + addi r3,r1,STACK_FRAME_OVERHEAD + EXC_XFER_STD(0x700, program_check_exception) + + EXCEPTION(0x0800, Trap_08, unknown_exception, EXC_XFER_EE) + EXCEPTION(0x0900, Trap_09, unknown_exception, EXC_XFER_EE) + EXCEPTION(0x0A00, Trap_0A, unknown_exception, EXC_XFER_EE) + EXCEPTION(0x0B00, Trap_0B, unknown_exception, EXC_XFER_EE) + +/* 0x0C00 - System Call Exception */ + START_EXCEPTION(0x0C00, SystemCall) + NORMAL_EXCEPTION_PROLOG + EXC_XFER_EE_LITE(0xc00, DoSyscall) + + EXCEPTION(0x0D00, Trap_0D, unknown_exception, EXC_XFER_EE) + EXCEPTION(0x0E00, Trap_0E, unknown_exception, EXC_XFER_EE) + EXCEPTION(0x0F00, Trap_0F, unknown_exception, EXC_XFER_EE) + +/* 0x1000 - Programmable Interval Timer (PIT) Exception */ + START_EXCEPTION(0x1000, Decrementer) + NORMAL_EXCEPTION_PROLOG + lis r0,TSR_PIS@h + mtspr SPRN_TSR,r0 /* Clear the PIT exception */ + addi r3,r1,STACK_FRAME_OVERHEAD + EXC_XFER_LITE(0x1000, timer_interrupt) + +#if 0 +/* NOTE: + * FIT and WDT handlers are not implemented yet. + */ + +/* 0x1010 - Fixed Interval Timer (FIT) Exception +*/ + STND_EXCEPTION(0x1010, FITException, unknown_exception) + +/* 0x1020 - Watchdog Timer (WDT) Exception +*/ +#ifdef CONFIG_BOOKE_WDT + CRITICAL_EXCEPTION(0x1020, WDTException, WatchdogException) +#else + CRITICAL_EXCEPTION(0x1020, WDTException, unknown_exception) +#endif +#endif + +/* 0x1100 - Data TLB Miss Exception + * As the name implies, translation is not in the MMU, so search the + * page tables and fix it. The only purpose of this function is to + * load TLB entries from the page table if they exist. + */ + START_EXCEPTION(0x1100, DTLBMiss) + mtspr SPRN_SPRG0, r10 /* Save some working registers */ + mtspr SPRN_SPRG1, r11 +#ifdef CONFIG_403GCX + stw r12, 0(r0) + stw r9, 4(r0) + mfcr r11 + mfspr r12, SPRN_PID + stw r11, 8(r0) + stw r12, 12(r0) +#else + mtspr SPRN_SPRG4, r12 + mtspr SPRN_SPRG5, r9 + mfcr r11 + mfspr r12, SPRN_PID + mtspr SPRN_SPRG7, r11 + mtspr SPRN_SPRG6, r12 +#endif + mfspr r10, SPRN_DEAR /* Get faulting address */ + + /* If we are faulting a kernel address, we have to use the + * kernel page tables. + */ + lis r11, TASK_SIZE@h + cmplw r10, r11 + blt+ 3f + lis r11, swapper_pg_dir@h + ori r11, r11, swapper_pg_dir@l + li r9, 0 + mtspr SPRN_PID, r9 /* TLB will have 0 TID */ + b 4f + + /* Get the PGD for the current thread. + */ +3: + mfspr r11,SPRN_SPRG3 + lwz r11,PGDIR(r11) +4: + tophys(r11, r11) + rlwimi r11, r10, 12, 20, 29 /* Create L1 (pgdir/pmd) address */ + lwz r12, 0(r11) /* Get L1 entry */ + andi. r9, r12, _PMD_PRESENT /* Check if it points to a PTE page */ + beq 2f /* Bail if no table */ + + rlwimi r12, r10, 22, 20, 29 /* Compute PTE address */ + lwz r11, 0(r12) /* Get Linux PTE */ + andi. r9, r11, _PAGE_PRESENT + beq 5f + + ori r11, r11, _PAGE_ACCESSED + stw r11, 0(r12) + + /* Create TLB tag. This is the faulting address plus a static + * set of bits. These are size, valid, E, U0. + */ + li r12, 0x00c0 + rlwimi r10, r12, 0, 20, 31 + + b finish_tlb_load + +2: /* Check for possible large-page pmd entry */ + rlwinm. r9, r12, 2, 22, 24 + beq 5f + + /* Create TLB tag. This is the faulting address, plus a static + * set of bits (valid, E, U0) plus the size from the PMD. + */ + ori r9, r9, 0x40 + rlwimi r10, r9, 0, 20, 31 + mr r11, r12 + + b finish_tlb_load + +5: + /* The bailout. Restore registers to pre-exception conditions + * and call the heavyweights to help us out. + */ +#ifdef CONFIG_403GCX + lwz r12, 12(r0) + lwz r11, 8(r0) + mtspr SPRN_PID, r12 + mtcr r11 + lwz r9, 4(r0) + lwz r12, 0(r0) +#else + mfspr r12, SPRN_SPRG6 + mfspr r11, SPRN_SPRG7 + mtspr SPRN_PID, r12 + mtcr r11 + mfspr r9, SPRN_SPRG5 + mfspr r12, SPRN_SPRG4 +#endif + mfspr r11, SPRN_SPRG1 + mfspr r10, SPRN_SPRG0 + b DataAccess + +/* 0x1200 - Instruction TLB Miss Exception + * Nearly the same as above, except we get our information from different + * registers and bailout to a different point. + */ + START_EXCEPTION(0x1200, ITLBMiss) + mtspr SPRN_SPRG0, r10 /* Save some working registers */ + mtspr SPRN_SPRG1, r11 +#ifdef CONFIG_403GCX + stw r12, 0(r0) + stw r9, 4(r0) + mfcr r11 + mfspr r12, SPRN_PID + stw r11, 8(r0) + stw r12, 12(r0) +#else + mtspr SPRN_SPRG4, r12 + mtspr SPRN_SPRG5, r9 + mfcr r11 + mfspr r12, SPRN_PID + mtspr SPRN_SPRG7, r11 + mtspr SPRN_SPRG6, r12 +#endif + mfspr r10, SPRN_SRR0 /* Get faulting address */ + + /* If we are faulting a kernel address, we have to use the + * kernel page tables. + */ + lis r11, TASK_SIZE@h + cmplw r10, r11 + blt+ 3f + lis r11, swapper_pg_dir@h + ori r11, r11, swapper_pg_dir@l + li r9, 0 + mtspr SPRN_PID, r9 /* TLB will have 0 TID */ + b 4f + + /* Get the PGD for the current thread. + */ +3: + mfspr r11,SPRN_SPRG3 + lwz r11,PGDIR(r11) +4: + tophys(r11, r11) + rlwimi r11, r10, 12, 20, 29 /* Create L1 (pgdir/pmd) address */ + lwz r12, 0(r11) /* Get L1 entry */ + andi. r9, r12, _PMD_PRESENT /* Check if it points to a PTE page */ + beq 2f /* Bail if no table */ + + rlwimi r12, r10, 22, 20, 29 /* Compute PTE address */ + lwz r11, 0(r12) /* Get Linux PTE */ + andi. r9, r11, _PAGE_PRESENT + beq 5f + + ori r11, r11, _PAGE_ACCESSED + stw r11, 0(r12) + + /* Create TLB tag. This is the faulting address plus a static + * set of bits. These are size, valid, E, U0. + */ + li r12, 0x00c0 + rlwimi r10, r12, 0, 20, 31 + + b finish_tlb_load + +2: /* Check for possible large-page pmd entry */ + rlwinm. r9, r12, 2, 22, 24 + beq 5f + + /* Create TLB tag. This is the faulting address, plus a static + * set of bits (valid, E, U0) plus the size from the PMD. + */ + ori r9, r9, 0x40 + rlwimi r10, r9, 0, 20, 31 + mr r11, r12 + + b finish_tlb_load + +5: + /* The bailout. Restore registers to pre-exception conditions + * and call the heavyweights to help us out. + */ +#ifdef CONFIG_403GCX + lwz r12, 12(r0) + lwz r11, 8(r0) + mtspr SPRN_PID, r12 + mtcr r11 + lwz r9, 4(r0) + lwz r12, 0(r0) +#else + mfspr r12, SPRN_SPRG6 + mfspr r11, SPRN_SPRG7 + mtspr SPRN_PID, r12 + mtcr r11 + mfspr r9, SPRN_SPRG5 + mfspr r12, SPRN_SPRG4 +#endif + mfspr r11, SPRN_SPRG1 + mfspr r10, SPRN_SPRG0 + b InstructionAccess + + EXCEPTION(0x1300, Trap_13, unknown_exception, EXC_XFER_EE) + EXCEPTION(0x1400, Trap_14, unknown_exception, EXC_XFER_EE) + EXCEPTION(0x1500, Trap_15, unknown_exception, EXC_XFER_EE) + EXCEPTION(0x1600, Trap_16, unknown_exception, EXC_XFER_EE) +#ifdef CONFIG_IBM405_ERR51 + /* 405GP errata 51 */ + START_EXCEPTION(0x1700, Trap_17) + b DTLBMiss +#else + EXCEPTION(0x1700, Trap_17, unknown_exception, EXC_XFER_EE) +#endif + EXCEPTION(0x1800, Trap_18, unknown_exception, EXC_XFER_EE) + EXCEPTION(0x1900, Trap_19, unknown_exception, EXC_XFER_EE) + EXCEPTION(0x1A00, Trap_1A, unknown_exception, EXC_XFER_EE) + EXCEPTION(0x1B00, Trap_1B, unknown_exception, EXC_XFER_EE) + EXCEPTION(0x1C00, Trap_1C, unknown_exception, EXC_XFER_EE) + EXCEPTION(0x1D00, Trap_1D, unknown_exception, EXC_XFER_EE) + EXCEPTION(0x1E00, Trap_1E, unknown_exception, EXC_XFER_EE) + EXCEPTION(0x1F00, Trap_1F, unknown_exception, EXC_XFER_EE) + +/* Check for a single step debug exception while in an exception + * handler before state has been saved. This is to catch the case + * where an instruction that we are trying to single step causes + * an exception (eg ITLB/DTLB miss) and thus the first instruction of + * the exception handler generates a single step debug exception. + * + * If we get a debug trap on the first instruction of an exception handler, + * we reset the MSR_DE in the _exception handler's_ MSR (the debug trap is + * a critical exception, so we are using SPRN_CSRR1 to manipulate the MSR). + * The exception handler was handling a non-critical interrupt, so it will + * save (and later restore) the MSR via SPRN_SRR1, which will still have + * the MSR_DE bit set. + */ + /* 0x2000 - Debug Exception */ + START_EXCEPTION(0x2000, DebugTrap) + CRITICAL_EXCEPTION_PROLOG + + /* + * If this is a single step or branch-taken exception in an + * exception entry sequence, it was probably meant to apply to + * the code where the exception occurred (since exception entry + * doesn't turn off DE automatically). We simulate the effect + * of turning off DE on entry to an exception handler by turning + * off DE in the SRR3 value and clearing the debug status. + */ + mfspr r10,SPRN_DBSR /* check single-step/branch taken */ + andis. r10,r10,DBSR_IC@h + beq+ 2f + + andi. r10,r9,MSR_IR|MSR_PR /* check supervisor + MMU off */ + beq 1f /* branch and fix it up */ + + mfspr r10,SPRN_SRR2 /* Faulting instruction address */ + cmplwi r10,0x2100 + bgt+ 2f /* address above exception vectors */ + + /* here it looks like we got an inappropriate debug exception. */ +1: rlwinm r9,r9,0,~MSR_DE /* clear DE in the SRR3 value */ + lis r10,DBSR_IC@h /* clear the IC event */ + mtspr SPRN_DBSR,r10 + /* restore state and get out */ + lwz r10,_CCR(r11) + lwz r0,GPR0(r11) + lwz r1,GPR1(r11) + mtcrf 0x80,r10 + mtspr SPRN_SRR2,r12 + mtspr SPRN_SRR3,r9 + lwz r9,GPR9(r11) + lwz r12,GPR12(r11) + lwz r10,crit_r10@l(0) + lwz r11,crit_r11@l(0) + PPC405_ERR77_SYNC + rfci + b . + + /* continue normal handling for a critical exception... */ +2: mfspr r4,SPRN_DBSR + addi r3,r1,STACK_FRAME_OVERHEAD + EXC_XFER_TEMPLATE(DebugException, 0x2002, \ + (MSR_KERNEL & ~(MSR_ME|MSR_DE|MSR_CE)), \ + NOCOPY, crit_transfer_to_handler, ret_from_crit_exc) + +/* + * The other Data TLB exceptions bail out to this point + * if they can't resolve the lightweight TLB fault. + */ +DataAccess: + NORMAL_EXCEPTION_PROLOG + mfspr r5,SPRN_ESR /* Grab the ESR, save it, pass arg3 */ + stw r5,_ESR(r11) + mfspr r4,SPRN_DEAR /* Grab the DEAR, save it, pass arg2 */ + EXC_XFER_EE_LITE(0x300, handle_page_fault) + +/* Other PowerPC processors, namely those derived from the 6xx-series + * have vectors from 0x2100 through 0x2F00 defined, but marked as reserved. + * However, for the 4xx-series processors these are neither defined nor + * reserved. + */ + + /* Damn, I came up one instruction too many to fit into the + * exception space :-). Both the instruction and data TLB + * miss get to this point to load the TLB. + * r10 - TLB_TAG value + * r11 - Linux PTE + * r12, r9 - avilable to use + * PID - loaded with proper value when we get here + * Upon exit, we reload everything and RFI. + * Actually, it will fit now, but oh well.....a common place + * to load the TLB. + */ +tlb_4xx_index: + .long 0 +finish_tlb_load: + /* load the next available TLB index. + */ + lwz r9, tlb_4xx_index@l(0) + addi r9, r9, 1 + andi. r9, r9, (PPC4XX_TLB_SIZE-1) + stw r9, tlb_4xx_index@l(0) + +6: + /* + * Clear out the software-only bits in the PTE to generate the + * TLB_DATA value. These are the bottom 2 bits of the RPM, the + * top 3 bits of the zone field, and M. + */ + li r12, 0x0ce2 + andc r11, r11, r12 + + tlbwe r11, r9, TLB_DATA /* Load TLB LO */ + tlbwe r10, r9, TLB_TAG /* Load TLB HI */ + + /* Done...restore registers and get out of here. + */ +#ifdef CONFIG_403GCX + lwz r12, 12(r0) + lwz r11, 8(r0) + mtspr SPRN_PID, r12 + mtcr r11 + lwz r9, 4(r0) + lwz r12, 0(r0) +#else + mfspr r12, SPRN_SPRG6 + mfspr r11, SPRN_SPRG7 + mtspr SPRN_PID, r12 + mtcr r11 + mfspr r9, SPRN_SPRG5 + mfspr r12, SPRN_SPRG4 +#endif + mfspr r11, SPRN_SPRG1 + mfspr r10, SPRN_SPRG0 + PPC405_ERR77_SYNC + rfi /* Should sync shadow TLBs */ + b . /* prevent prefetch past rfi */ + +/* extern void giveup_fpu(struct task_struct *prev) + * + * The PowerPC 4xx family of processors do not have an FPU, so this just + * returns. + */ +_GLOBAL(giveup_fpu) + blr + +/* This is where the main kernel code starts. + */ +start_here: + + /* ptr to current */ + lis r2,init_task@h + ori r2,r2,init_task@l + + /* ptr to phys current thread */ + tophys(r4,r2) + addi r4,r4,THREAD /* init task's THREAD */ + mtspr SPRN_SPRG3,r4 + + /* stack */ + lis r1,init_thread_union@ha + addi r1,r1,init_thread_union@l + li r0,0 + stwu r0,THREAD_SIZE-STACK_FRAME_OVERHEAD(r1) + + bl early_init /* We have to do this with MMU on */ + +/* + * Decide what sort of machine this is and initialize the MMU. + */ + mr r3,r31 + mr r4,r30 + mr r5,r29 + mr r6,r28 + mr r7,r27 + bl machine_init + bl MMU_init + +/* Go back to running unmapped so we can load up new values + * and change to using our exception vectors. + * On the 4xx, all we have to do is invalidate the TLB to clear + * the old 16M byte TLB mappings. + */ + lis r4,2f@h + ori r4,r4,2f@l + tophys(r4,r4) + lis r3,(MSR_KERNEL & ~(MSR_IR|MSR_DR))@h + ori r3,r3,(MSR_KERNEL & ~(MSR_IR|MSR_DR))@l + mtspr SPRN_SRR0,r4 + mtspr SPRN_SRR1,r3 + rfi + b . /* prevent prefetch past rfi */ + +/* Load up the kernel context */ +2: + sync /* Flush to memory before changing TLB */ + tlbia + isync /* Flush shadow TLBs */ + + /* set up the PTE pointers for the Abatron bdiGDB. + */ + lis r6, swapper_pg_dir@h + ori r6, r6, swapper_pg_dir@l + lis r5, abatron_pteptrs@h + ori r5, r5, abatron_pteptrs@l + stw r5, 0xf0(r0) /* Must match your Abatron config file */ + tophys(r5,r5) + stw r6, 0(r5) + +/* Now turn on the MMU for real! */ + lis r4,MSR_KERNEL@h + ori r4,r4,MSR_KERNEL@l + lis r3,start_kernel@h + ori r3,r3,start_kernel@l + mtspr SPRN_SRR0,r3 + mtspr SPRN_SRR1,r4 + rfi /* enable MMU and jump to start_kernel */ + b . /* prevent prefetch past rfi */ + +/* Set up the initial MMU state so we can do the first level of + * kernel initialization. This maps the first 16 MBytes of memory 1:1 + * virtual to physical and more importantly sets the cache mode. + */ +initial_mmu: + tlbia /* Invalidate all TLB entries */ + isync + + /* We should still be executing code at physical address 0x0000xxxx + * at this point. However, start_here is at virtual address + * 0xC000xxxx. So, set up a TLB mapping to cover this once + * translation is enabled. + */ + + lis r3,KERNELBASE@h /* Load the kernel virtual address */ + ori r3,r3,KERNELBASE@l + tophys(r4,r3) /* Load the kernel physical address */ + + iccci r0,r3 /* Invalidate the i-cache before use */ + + /* Load the kernel PID. + */ + li r0,0 + mtspr SPRN_PID,r0 + sync + + /* Configure and load two entries into TLB slots 62 and 63. + * In case we are pinning TLBs, these are reserved in by the + * other TLB functions. If not reserving, then it doesn't + * matter where they are loaded. + */ + clrrwi r4,r4,10 /* Mask off the real page number */ + ori r4,r4,(TLB_WR | TLB_EX) /* Set the write and execute bits */ + + clrrwi r3,r3,10 /* Mask off the effective page number */ + ori r3,r3,(TLB_VALID | TLB_PAGESZ(PAGESZ_16M)) + + li r0,63 /* TLB slot 63 */ + + tlbwe r4,r0,TLB_DATA /* Load the data portion of the entry */ + tlbwe r3,r0,TLB_TAG /* Load the tag portion of the entry */ + +#if defined(CONFIG_SERIAL_TEXT_DEBUG) && defined(SERIAL_DEBUG_IO_BASE) + + /* Load a TLB entry for the UART, so that ppc4xx_progress() can use + * the UARTs nice and early. We use a 4k real==virtual mapping. */ + + lis r3,SERIAL_DEBUG_IO_BASE@h + ori r3,r3,SERIAL_DEBUG_IO_BASE@l + mr r4,r3 + clrrwi r4,r4,12 + ori r4,r4,(TLB_WR|TLB_I|TLB_M|TLB_G) + + clrrwi r3,r3,12 + ori r3,r3,(TLB_VALID | TLB_PAGESZ(PAGESZ_4K)) + + li r0,0 /* TLB slot 0 */ + tlbwe r4,r0,TLB_DATA + tlbwe r3,r0,TLB_TAG +#endif /* CONFIG_SERIAL_DEBUG_TEXT && SERIAL_DEBUG_IO_BASE */ + + isync + + /* Establish the exception vector base + */ + lis r4,KERNELBASE@h /* EVPR only uses the high 16-bits */ + tophys(r0,r4) /* Use the physical address */ + mtspr SPRN_EVPR,r0 + + blr + +_GLOBAL(abort) + mfspr r13,SPRN_DBCR0 + oris r13,r13,DBCR0_RST_SYSTEM@h + mtspr SPRN_DBCR0,r13 + +_GLOBAL(set_context) + +#ifdef CONFIG_BDI_SWITCH + /* Context switch the PTE pointer for the Abatron BDI2000. + * The PGDIR is the second parameter. + */ + lis r5, KERNELBASE@h + lwz r5, 0xf0(r5) + stw r4, 0x4(r5) +#endif + sync + mtspr SPRN_PID,r3 + isync /* Need an isync to flush shadow */ + /* TLBs after changing PID */ + blr + +/* We put a few things here that have to be page-aligned. This stuff + * goes at the beginning of the data segment, which is page-aligned. + */ + .data + .align 12 + .globl sdata +sdata: + .globl empty_zero_page +empty_zero_page: + .space 4096 + .globl swapper_pg_dir +swapper_pg_dir: + .space 4096 + + +/* Stack for handling critical exceptions from kernel mode */ + .section .bss + .align 12 +exception_stack_bottom: + .space 4096 +critical_stack_top: + .globl exception_stack_top +exception_stack_top: + +/* This space gets a copy of optional info passed to us by the bootstrap + * which is used to pass parameters into the kernel like root=/dev/sda1, etc. + */ + .globl cmd_line +cmd_line: + .space 512 + +/* Room for two PTE pointers, usually the kernel and current user pointers + * to their respective root page table. + */ +abatron_pteptrs: + .space 8 diff --git a/arch/powerpc/kernel/head_4xx.S b/arch/powerpc/kernel/head_4xx.S deleted file mode 100644 index adc7f8097cd..00000000000 --- a/arch/powerpc/kernel/head_4xx.S +++ /dev/null @@ -1,1021 +0,0 @@ -/* - * Copyright (c) 1995-1996 Gary Thomas - * Initial PowerPC version. - * Copyright (c) 1996 Cort Dougan - * Rewritten for PReP - * Copyright (c) 1996 Paul Mackerras - * Low-level exception handers, MMU support, and rewrite. - * Copyright (c) 1997 Dan Malek - * PowerPC 8xx modifications. - * Copyright (c) 1998-1999 TiVo, Inc. - * PowerPC 403GCX modifications. - * Copyright (c) 1999 Grant Erickson - * PowerPC 403GCX/405GP modifications. - * Copyright 2000 MontaVista Software Inc. - * PPC405 modifications - * PowerPC 403GCX/405GP modifications. - * Author: MontaVista Software, Inc. - * frank_rowand@mvista.com or source@mvista.com - * debbie_chu@mvista.com - * - * - * Module name: head_4xx.S - * - * Description: - * Kernel execution entry point code. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - * - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include - -/* As with the other PowerPC ports, it is expected that when code - * execution begins here, the following registers contain valid, yet - * optional, information: - * - * r3 - Board info structure pointer (DRAM, frequency, MAC address, etc.) - * r4 - Starting address of the init RAM disk - * r5 - Ending address of the init RAM disk - * r6 - Start of kernel command line string (e.g. "mem=96m") - * r7 - End of kernel command line string - * - * This is all going to change RSN when we add bi_recs....... -- Dan - */ - .text -_GLOBAL(_stext) -_GLOBAL(_start) - - /* Save parameters we are passed. - */ - mr r31,r3 - mr r30,r4 - mr r29,r5 - mr r28,r6 - mr r27,r7 - - /* We have to turn on the MMU right away so we get cache modes - * set correctly. - */ - bl initial_mmu - -/* We now have the lower 16 Meg mapped into TLB entries, and the caches - * ready to work. - */ -turn_on_mmu: - lis r0,MSR_KERNEL@h - ori r0,r0,MSR_KERNEL@l - mtspr SPRN_SRR1,r0 - lis r0,start_here@h - ori r0,r0,start_here@l - mtspr SPRN_SRR0,r0 - SYNC - rfi /* enables MMU */ - b . /* prevent prefetch past rfi */ - -/* - * This area is used for temporarily saving registers during the - * critical exception prolog. - */ - . = 0xc0 -crit_save: -_GLOBAL(crit_r10) - .space 4 -_GLOBAL(crit_r11) - .space 4 - -/* - * Exception vector entry code. This code runs with address translation - * turned off (i.e. using physical addresses). We assume SPRG3 has the - * physical address of the current task thread_struct. - * Note that we have to have decremented r1 before we write to any fields - * of the exception frame, since a critical interrupt could occur at any - * time, and it will write to the area immediately below the current r1. - */ -#define NORMAL_EXCEPTION_PROLOG \ - mtspr SPRN_SPRG0,r10; /* save two registers to work with */\ - mtspr SPRN_SPRG1,r11; \ - mtspr SPRN_SPRG2,r1; \ - mfcr r10; /* save CR in r10 for now */\ - mfspr r11,SPRN_SRR1; /* check whether user or kernel */\ - andi. r11,r11,MSR_PR; \ - beq 1f; \ - mfspr r1,SPRN_SPRG3; /* if from user, start at top of */\ - lwz r1,THREAD_INFO-THREAD(r1); /* this thread's kernel stack */\ - addi r1,r1,THREAD_SIZE; \ -1: subi r1,r1,INT_FRAME_SIZE; /* Allocate an exception frame */\ - tophys(r11,r1); \ - stw r10,_CCR(r11); /* save various registers */\ - stw r12,GPR12(r11); \ - stw r9,GPR9(r11); \ - mfspr r10,SPRN_SPRG0; \ - stw r10,GPR10(r11); \ - mfspr r12,SPRN_SPRG1; \ - stw r12,GPR11(r11); \ - mflr r10; \ - stw r10,_LINK(r11); \ - mfspr r10,SPRN_SPRG2; \ - mfspr r12,SPRN_SRR0; \ - stw r10,GPR1(r11); \ - mfspr r9,SPRN_SRR1; \ - stw r10,0(r11); \ - rlwinm r9,r9,0,14,12; /* clear MSR_WE (necessary?) */\ - stw r0,GPR0(r11); \ - SAVE_4GPRS(3, r11); \ - SAVE_2GPRS(7, r11) - -/* - * Exception prolog for critical exceptions. This is a little different - * from the normal exception prolog above since a critical exception - * can potentially occur at any point during normal exception processing. - * Thus we cannot use the same SPRG registers as the normal prolog above. - * Instead we use a couple of words of memory at low physical addresses. - * This is OK since we don't support SMP on these processors. - */ -#define CRITICAL_EXCEPTION_PROLOG \ - stw r10,crit_r10@l(0); /* save two registers to work with */\ - stw r11,crit_r11@l(0); \ - mfcr r10; /* save CR in r10 for now */\ - mfspr r11,SPRN_SRR3; /* check whether user or kernel */\ - andi. r11,r11,MSR_PR; \ - lis r11,critical_stack_top@h; \ - ori r11,r11,critical_stack_top@l; \ - beq 1f; \ - /* COMING FROM USER MODE */ \ - mfspr r11,SPRN_SPRG3; /* if from user, start at top of */\ - lwz r11,THREAD_INFO-THREAD(r11); /* this thread's kernel stack */\ - addi r11,r11,THREAD_SIZE; \ -1: subi r11,r11,INT_FRAME_SIZE; /* Allocate an exception frame */\ - tophys(r11,r11); \ - stw r10,_CCR(r11); /* save various registers */\ - stw r12,GPR12(r11); \ - stw r9,GPR9(r11); \ - mflr r10; \ - stw r10,_LINK(r11); \ - mfspr r12,SPRN_DEAR; /* save DEAR and ESR in the frame */\ - stw r12,_DEAR(r11); /* since they may have had stuff */\ - mfspr r9,SPRN_ESR; /* in them at the point where the */\ - stw r9,_ESR(r11); /* exception was taken */\ - mfspr r12,SPRN_SRR2; \ - stw r1,GPR1(r11); \ - mfspr r9,SPRN_SRR3; \ - stw r1,0(r11); \ - tovirt(r1,r11); \ - rlwinm r9,r9,0,14,12; /* clear MSR_WE (necessary?) */\ - stw r0,GPR0(r11); \ - SAVE_4GPRS(3, r11); \ - SAVE_2GPRS(7, r11) - - /* - * State at this point: - * r9 saved in stack frame, now saved SRR3 & ~MSR_WE - * r10 saved in crit_r10 and in stack frame, trashed - * r11 saved in crit_r11 and in stack frame, - * now phys stack/exception frame pointer - * r12 saved in stack frame, now saved SRR2 - * CR saved in stack frame, CR0.EQ = !SRR3.PR - * LR, DEAR, ESR in stack frame - * r1 saved in stack frame, now virt stack/excframe pointer - * r0, r3-r8 saved in stack frame - */ - -/* - * Exception vectors. - */ -#define START_EXCEPTION(n, label) \ - . = n; \ -label: - -#define EXCEPTION(n, label, hdlr, xfer) \ - START_EXCEPTION(n, label); \ - NORMAL_EXCEPTION_PROLOG; \ - addi r3,r1,STACK_FRAME_OVERHEAD; \ - xfer(n, hdlr) - -#define CRITICAL_EXCEPTION(n, label, hdlr) \ - START_EXCEPTION(n, label); \ - CRITICAL_EXCEPTION_PROLOG; \ - addi r3,r1,STACK_FRAME_OVERHEAD; \ - EXC_XFER_TEMPLATE(hdlr, n+2, (MSR_KERNEL & ~(MSR_ME|MSR_DE|MSR_CE)), \ - NOCOPY, crit_transfer_to_handler, \ - ret_from_crit_exc) - -#define EXC_XFER_TEMPLATE(hdlr, trap, msr, copyee, tfer, ret) \ - li r10,trap; \ - stw r10,_TRAP(r11); \ - lis r10,msr@h; \ - ori r10,r10,msr@l; \ - copyee(r10, r9); \ - bl tfer; \ - .long hdlr; \ - .long ret - -#define COPY_EE(d, s) rlwimi d,s,0,16,16 -#define NOCOPY(d, s) - -#define EXC_XFER_STD(n, hdlr) \ - EXC_XFER_TEMPLATE(hdlr, n, MSR_KERNEL, NOCOPY, transfer_to_handler_full, \ - ret_from_except_full) - -#define EXC_XFER_LITE(n, hdlr) \ - EXC_XFER_TEMPLATE(hdlr, n+1, MSR_KERNEL, NOCOPY, transfer_to_handler, \ - ret_from_except) - -#define EXC_XFER_EE(n, hdlr) \ - EXC_XFER_TEMPLATE(hdlr, n, MSR_KERNEL, COPY_EE, transfer_to_handler_full, \ - ret_from_except_full) - -#define EXC_XFER_EE_LITE(n, hdlr) \ - EXC_XFER_TEMPLATE(hdlr, n+1, MSR_KERNEL, COPY_EE, transfer_to_handler, \ - ret_from_except) - - -/* - * 0x0100 - Critical Interrupt Exception - */ - CRITICAL_EXCEPTION(0x0100, CriticalInterrupt, unknown_exception) - -/* - * 0x0200 - Machine Check Exception - */ - CRITICAL_EXCEPTION(0x0200, MachineCheck, machine_check_exception) - -/* - * 0x0300 - Data Storage Exception - * This happens for just a few reasons. U0 set (but we don't do that), - * or zone protection fault (user violation, write to protected page). - * If this is just an update of modified status, we do that quickly - * and exit. Otherwise, we call heavywight functions to do the work. - */ - START_EXCEPTION(0x0300, DataStorage) - mtspr SPRN_SPRG0, r10 /* Save some working registers */ - mtspr SPRN_SPRG1, r11 -#ifdef CONFIG_403GCX - stw r12, 0(r0) - stw r9, 4(r0) - mfcr r11 - mfspr r12, SPRN_PID - stw r11, 8(r0) - stw r12, 12(r0) -#else - mtspr SPRN_SPRG4, r12 - mtspr SPRN_SPRG5, r9 - mfcr r11 - mfspr r12, SPRN_PID - mtspr SPRN_SPRG7, r11 - mtspr SPRN_SPRG6, r12 -#endif - - /* First, check if it was a zone fault (which means a user - * tried to access a kernel or read-protected page - always - * a SEGV). All other faults here must be stores, so no - * need to check ESR_DST as well. */ - mfspr r10, SPRN_ESR - andis. r10, r10, ESR_DIZ@h - bne 2f - - mfspr r10, SPRN_DEAR /* Get faulting address */ - - /* If we are faulting a kernel address, we have to use the - * kernel page tables. - */ - lis r11, TASK_SIZE@h - cmplw r10, r11 - blt+ 3f - lis r11, swapper_pg_dir@h - ori r11, r11, swapper_pg_dir@l - li r9, 0 - mtspr SPRN_PID, r9 /* TLB will have 0 TID */ - b 4f - - /* Get the PGD for the current thread. - */ -3: - mfspr r11,SPRN_SPRG3 - lwz r11,PGDIR(r11) -4: - tophys(r11, r11) - rlwimi r11, r10, 12, 20, 29 /* Create L1 (pgdir/pmd) address */ - lwz r11, 0(r11) /* Get L1 entry */ - rlwinm. r12, r11, 0, 0, 19 /* Extract L2 (pte) base address */ - beq 2f /* Bail if no table */ - - rlwimi r12, r10, 22, 20, 29 /* Compute PTE address */ - lwz r11, 0(r12) /* Get Linux PTE */ - - andi. r9, r11, _PAGE_RW /* Is it writeable? */ - beq 2f /* Bail if not */ - - /* Update 'changed'. - */ - ori r11, r11, _PAGE_DIRTY|_PAGE_ACCESSED|_PAGE_HWWRITE - stw r11, 0(r12) /* Update Linux page table */ - - /* Most of the Linux PTE is ready to load into the TLB LO. - * We set ZSEL, where only the LS-bit determines user access. - * We set execute, because we don't have the granularity to - * properly set this at the page level (Linux problem). - * If shared is set, we cause a zero PID->TID load. - * Many of these bits are software only. Bits we don't set - * here we (properly should) assume have the appropriate value. - */ - li r12, 0x0ce2 - andc r11, r11, r12 /* Make sure 20, 21 are zero */ - - /* find the TLB index that caused the fault. It has to be here. - */ - tlbsx r9, 0, r10 - - tlbwe r11, r9, TLB_DATA /* Load TLB LO */ - - /* Done...restore registers and get out of here. - */ -#ifdef CONFIG_403GCX - lwz r12, 12(r0) - lwz r11, 8(r0) - mtspr SPRN_PID, r12 - mtcr r11 - lwz r9, 4(r0) - lwz r12, 0(r0) -#else - mfspr r12, SPRN_SPRG6 - mfspr r11, SPRN_SPRG7 - mtspr SPRN_PID, r12 - mtcr r11 - mfspr r9, SPRN_SPRG5 - mfspr r12, SPRN_SPRG4 -#endif - mfspr r11, SPRN_SPRG1 - mfspr r10, SPRN_SPRG0 - PPC405_ERR77_SYNC - rfi /* Should sync shadow TLBs */ - b . /* prevent prefetch past rfi */ - -2: - /* The bailout. Restore registers to pre-exception conditions - * and call the heavyweights to help us out. - */ -#ifdef CONFIG_403GCX - lwz r12, 12(r0) - lwz r11, 8(r0) - mtspr SPRN_PID, r12 - mtcr r11 - lwz r9, 4(r0) - lwz r12, 0(r0) -#else - mfspr r12, SPRN_SPRG6 - mfspr r11, SPRN_SPRG7 - mtspr SPRN_PID, r12 - mtcr r11 - mfspr r9, SPRN_SPRG5 - mfspr r12, SPRN_SPRG4 -#endif - mfspr r11, SPRN_SPRG1 - mfspr r10, SPRN_SPRG0 - b DataAccess - -/* - * 0x0400 - Instruction Storage Exception - * This is caused by a fetch from non-execute or guarded pages. - */ - START_EXCEPTION(0x0400, InstructionAccess) - NORMAL_EXCEPTION_PROLOG - mr r4,r12 /* Pass SRR0 as arg2 */ - li r5,0 /* Pass zero as arg3 */ - EXC_XFER_EE_LITE(0x400, handle_page_fault) - -/* 0x0500 - External Interrupt Exception */ - EXCEPTION(0x0500, HardwareInterrupt, do_IRQ, EXC_XFER_LITE) - -/* 0x0600 - Alignment Exception */ - START_EXCEPTION(0x0600, Alignment) - NORMAL_EXCEPTION_PROLOG - mfspr r4,SPRN_DEAR /* Grab the DEAR and save it */ - stw r4,_DEAR(r11) - addi r3,r1,STACK_FRAME_OVERHEAD - EXC_XFER_EE(0x600, alignment_exception) - -/* 0x0700 - Program Exception */ - START_EXCEPTION(0x0700, ProgramCheck) - NORMAL_EXCEPTION_PROLOG - mfspr r4,SPRN_ESR /* Grab the ESR and save it */ - stw r4,_ESR(r11) - addi r3,r1,STACK_FRAME_OVERHEAD - EXC_XFER_STD(0x700, program_check_exception) - - EXCEPTION(0x0800, Trap_08, unknown_exception, EXC_XFER_EE) - EXCEPTION(0x0900, Trap_09, unknown_exception, EXC_XFER_EE) - EXCEPTION(0x0A00, Trap_0A, unknown_exception, EXC_XFER_EE) - EXCEPTION(0x0B00, Trap_0B, unknown_exception, EXC_XFER_EE) - -/* 0x0C00 - System Call Exception */ - START_EXCEPTION(0x0C00, SystemCall) - NORMAL_EXCEPTION_PROLOG - EXC_XFER_EE_LITE(0xc00, DoSyscall) - - EXCEPTION(0x0D00, Trap_0D, unknown_exception, EXC_XFER_EE) - EXCEPTION(0x0E00, Trap_0E, unknown_exception, EXC_XFER_EE) - EXCEPTION(0x0F00, Trap_0F, unknown_exception, EXC_XFER_EE) - -/* 0x1000 - Programmable Interval Timer (PIT) Exception */ - START_EXCEPTION(0x1000, Decrementer) - NORMAL_EXCEPTION_PROLOG - lis r0,TSR_PIS@h - mtspr SPRN_TSR,r0 /* Clear the PIT exception */ - addi r3,r1,STACK_FRAME_OVERHEAD - EXC_XFER_LITE(0x1000, timer_interrupt) - -#if 0 -/* NOTE: - * FIT and WDT handlers are not implemented yet. - */ - -/* 0x1010 - Fixed Interval Timer (FIT) Exception -*/ - STND_EXCEPTION(0x1010, FITException, unknown_exception) - -/* 0x1020 - Watchdog Timer (WDT) Exception -*/ -#ifdef CONFIG_BOOKE_WDT - CRITICAL_EXCEPTION(0x1020, WDTException, WatchdogException) -#else - CRITICAL_EXCEPTION(0x1020, WDTException, unknown_exception) -#endif -#endif - -/* 0x1100 - Data TLB Miss Exception - * As the name implies, translation is not in the MMU, so search the - * page tables and fix it. The only purpose of this function is to - * load TLB entries from the page table if they exist. - */ - START_EXCEPTION(0x1100, DTLBMiss) - mtspr SPRN_SPRG0, r10 /* Save some working registers */ - mtspr SPRN_SPRG1, r11 -#ifdef CONFIG_403GCX - stw r12, 0(r0) - stw r9, 4(r0) - mfcr r11 - mfspr r12, SPRN_PID - stw r11, 8(r0) - stw r12, 12(r0) -#else - mtspr SPRN_SPRG4, r12 - mtspr SPRN_SPRG5, r9 - mfcr r11 - mfspr r12, SPRN_PID - mtspr SPRN_SPRG7, r11 - mtspr SPRN_SPRG6, r12 -#endif - mfspr r10, SPRN_DEAR /* Get faulting address */ - - /* If we are faulting a kernel address, we have to use the - * kernel page tables. - */ - lis r11, TASK_SIZE@h - cmplw r10, r11 - blt+ 3f - lis r11, swapper_pg_dir@h - ori r11, r11, swapper_pg_dir@l - li r9, 0 - mtspr SPRN_PID, r9 /* TLB will have 0 TID */ - b 4f - - /* Get the PGD for the current thread. - */ -3: - mfspr r11,SPRN_SPRG3 - lwz r11,PGDIR(r11) -4: - tophys(r11, r11) - rlwimi r11, r10, 12, 20, 29 /* Create L1 (pgdir/pmd) address */ - lwz r12, 0(r11) /* Get L1 entry */ - andi. r9, r12, _PMD_PRESENT /* Check if it points to a PTE page */ - beq 2f /* Bail if no table */ - - rlwimi r12, r10, 22, 20, 29 /* Compute PTE address */ - lwz r11, 0(r12) /* Get Linux PTE */ - andi. r9, r11, _PAGE_PRESENT - beq 5f - - ori r11, r11, _PAGE_ACCESSED - stw r11, 0(r12) - - /* Create TLB tag. This is the faulting address plus a static - * set of bits. These are size, valid, E, U0. - */ - li r12, 0x00c0 - rlwimi r10, r12, 0, 20, 31 - - b finish_tlb_load - -2: /* Check for possible large-page pmd entry */ - rlwinm. r9, r12, 2, 22, 24 - beq 5f - - /* Create TLB tag. This is the faulting address, plus a static - * set of bits (valid, E, U0) plus the size from the PMD. - */ - ori r9, r9, 0x40 - rlwimi r10, r9, 0, 20, 31 - mr r11, r12 - - b finish_tlb_load - -5: - /* The bailout. Restore registers to pre-exception conditions - * and call the heavyweights to help us out. - */ -#ifdef CONFIG_403GCX - lwz r12, 12(r0) - lwz r11, 8(r0) - mtspr SPRN_PID, r12 - mtcr r11 - lwz r9, 4(r0) - lwz r12, 0(r0) -#else - mfspr r12, SPRN_SPRG6 - mfspr r11, SPRN_SPRG7 - mtspr SPRN_PID, r12 - mtcr r11 - mfspr r9, SPRN_SPRG5 - mfspr r12, SPRN_SPRG4 -#endif - mfspr r11, SPRN_SPRG1 - mfspr r10, SPRN_SPRG0 - b DataAccess - -/* 0x1200 - Instruction TLB Miss Exception - * Nearly the same as above, except we get our information from different - * registers and bailout to a different point. - */ - START_EXCEPTION(0x1200, ITLBMiss) - mtspr SPRN_SPRG0, r10 /* Save some working registers */ - mtspr SPRN_SPRG1, r11 -#ifdef CONFIG_403GCX - stw r12, 0(r0) - stw r9, 4(r0) - mfcr r11 - mfspr r12, SPRN_PID - stw r11, 8(r0) - stw r12, 12(r0) -#else - mtspr SPRN_SPRG4, r12 - mtspr SPRN_SPRG5, r9 - mfcr r11 - mfspr r12, SPRN_PID - mtspr SPRN_SPRG7, r11 - mtspr SPRN_SPRG6, r12 -#endif - mfspr r10, SPRN_SRR0 /* Get faulting address */ - - /* If we are faulting a kernel address, we have to use the - * kernel page tables. - */ - lis r11, TASK_SIZE@h - cmplw r10, r11 - blt+ 3f - lis r11, swapper_pg_dir@h - ori r11, r11, swapper_pg_dir@l - li r9, 0 - mtspr SPRN_PID, r9 /* TLB will have 0 TID */ - b 4f - - /* Get the PGD for the current thread. - */ -3: - mfspr r11,SPRN_SPRG3 - lwz r11,PGDIR(r11) -4: - tophys(r11, r11) - rlwimi r11, r10, 12, 20, 29 /* Create L1 (pgdir/pmd) address */ - lwz r12, 0(r11) /* Get L1 entry */ - andi. r9, r12, _PMD_PRESENT /* Check if it points to a PTE page */ - beq 2f /* Bail if no table */ - - rlwimi r12, r10, 22, 20, 29 /* Compute PTE address */ - lwz r11, 0(r12) /* Get Linux PTE */ - andi. r9, r11, _PAGE_PRESENT - beq 5f - - ori r11, r11, _PAGE_ACCESSED - stw r11, 0(r12) - - /* Create TLB tag. This is the faulting address plus a static - * set of bits. These are size, valid, E, U0. - */ - li r12, 0x00c0 - rlwimi r10, r12, 0, 20, 31 - - b finish_tlb_load - -2: /* Check for possible large-page pmd entry */ - rlwinm. r9, r12, 2, 22, 24 - beq 5f - - /* Create TLB tag. This is the faulting address, plus a static - * set of bits (valid, E, U0) plus the size from the PMD. - */ - ori r9, r9, 0x40 - rlwimi r10, r9, 0, 20, 31 - mr r11, r12 - - b finish_tlb_load - -5: - /* The bailout. Restore registers to pre-exception conditions - * and call the heavyweights to help us out. - */ -#ifdef CONFIG_403GCX - lwz r12, 12(r0) - lwz r11, 8(r0) - mtspr SPRN_PID, r12 - mtcr r11 - lwz r9, 4(r0) - lwz r12, 0(r0) -#else - mfspr r12, SPRN_SPRG6 - mfspr r11, SPRN_SPRG7 - mtspr SPRN_PID, r12 - mtcr r11 - mfspr r9, SPRN_SPRG5 - mfspr r12, SPRN_SPRG4 -#endif - mfspr r11, SPRN_SPRG1 - mfspr r10, SPRN_SPRG0 - b InstructionAccess - - EXCEPTION(0x1300, Trap_13, unknown_exception, EXC_XFER_EE) - EXCEPTION(0x1400, Trap_14, unknown_exception, EXC_XFER_EE) - EXCEPTION(0x1500, Trap_15, unknown_exception, EXC_XFER_EE) - EXCEPTION(0x1600, Trap_16, unknown_exception, EXC_XFER_EE) -#ifdef CONFIG_IBM405_ERR51 - /* 405GP errata 51 */ - START_EXCEPTION(0x1700, Trap_17) - b DTLBMiss -#else - EXCEPTION(0x1700, Trap_17, unknown_exception, EXC_XFER_EE) -#endif - EXCEPTION(0x1800, Trap_18, unknown_exception, EXC_XFER_EE) - EXCEPTION(0x1900, Trap_19, unknown_exception, EXC_XFER_EE) - EXCEPTION(0x1A00, Trap_1A, unknown_exception, EXC_XFER_EE) - EXCEPTION(0x1B00, Trap_1B, unknown_exception, EXC_XFER_EE) - EXCEPTION(0x1C00, Trap_1C, unknown_exception, EXC_XFER_EE) - EXCEPTION(0x1D00, Trap_1D, unknown_exception, EXC_XFER_EE) - EXCEPTION(0x1E00, Trap_1E, unknown_exception, EXC_XFER_EE) - EXCEPTION(0x1F00, Trap_1F, unknown_exception, EXC_XFER_EE) - -/* Check for a single step debug exception while in an exception - * handler before state has been saved. This is to catch the case - * where an instruction that we are trying to single step causes - * an exception (eg ITLB/DTLB miss) and thus the first instruction of - * the exception handler generates a single step debug exception. - * - * If we get a debug trap on the first instruction of an exception handler, - * we reset the MSR_DE in the _exception handler's_ MSR (the debug trap is - * a critical exception, so we are using SPRN_CSRR1 to manipulate the MSR). - * The exception handler was handling a non-critical interrupt, so it will - * save (and later restore) the MSR via SPRN_SRR1, which will still have - * the MSR_DE bit set. - */ - /* 0x2000 - Debug Exception */ - START_EXCEPTION(0x2000, DebugTrap) - CRITICAL_EXCEPTION_PROLOG - - /* - * If this is a single step or branch-taken exception in an - * exception entry sequence, it was probably meant to apply to - * the code where the exception occurred (since exception entry - * doesn't turn off DE automatically). We simulate the effect - * of turning off DE on entry to an exception handler by turning - * off DE in the SRR3 value and clearing the debug status. - */ - mfspr r10,SPRN_DBSR /* check single-step/branch taken */ - andis. r10,r10,DBSR_IC@h - beq+ 2f - - andi. r10,r9,MSR_IR|MSR_PR /* check supervisor + MMU off */ - beq 1f /* branch and fix it up */ - - mfspr r10,SPRN_SRR2 /* Faulting instruction address */ - cmplwi r10,0x2100 - bgt+ 2f /* address above exception vectors */ - - /* here it looks like we got an inappropriate debug exception. */ -1: rlwinm r9,r9,0,~MSR_DE /* clear DE in the SRR3 value */ - lis r10,DBSR_IC@h /* clear the IC event */ - mtspr SPRN_DBSR,r10 - /* restore state and get out */ - lwz r10,_CCR(r11) - lwz r0,GPR0(r11) - lwz r1,GPR1(r11) - mtcrf 0x80,r10 - mtspr SPRN_SRR2,r12 - mtspr SPRN_SRR3,r9 - lwz r9,GPR9(r11) - lwz r12,GPR12(r11) - lwz r10,crit_r10@l(0) - lwz r11,crit_r11@l(0) - PPC405_ERR77_SYNC - rfci - b . - - /* continue normal handling for a critical exception... */ -2: mfspr r4,SPRN_DBSR - addi r3,r1,STACK_FRAME_OVERHEAD - EXC_XFER_TEMPLATE(DebugException, 0x2002, \ - (MSR_KERNEL & ~(MSR_ME|MSR_DE|MSR_CE)), \ - NOCOPY, crit_transfer_to_handler, ret_from_crit_exc) - -/* - * The other Data TLB exceptions bail out to this point - * if they can't resolve the lightweight TLB fault. - */ -DataAccess: - NORMAL_EXCEPTION_PROLOG - mfspr r5,SPRN_ESR /* Grab the ESR, save it, pass arg3 */ - stw r5,_ESR(r11) - mfspr r4,SPRN_DEAR /* Grab the DEAR, save it, pass arg2 */ - EXC_XFER_EE_LITE(0x300, handle_page_fault) - -/* Other PowerPC processors, namely those derived from the 6xx-series - * have vectors from 0x2100 through 0x2F00 defined, but marked as reserved. - * However, for the 4xx-series processors these are neither defined nor - * reserved. - */ - - /* Damn, I came up one instruction too many to fit into the - * exception space :-). Both the instruction and data TLB - * miss get to this point to load the TLB. - * r10 - TLB_TAG value - * r11 - Linux PTE - * r12, r9 - avilable to use - * PID - loaded with proper value when we get here - * Upon exit, we reload everything and RFI. - * Actually, it will fit now, but oh well.....a common place - * to load the TLB. - */ -tlb_4xx_index: - .long 0 -finish_tlb_load: - /* load the next available TLB index. - */ - lwz r9, tlb_4xx_index@l(0) - addi r9, r9, 1 - andi. r9, r9, (PPC4XX_TLB_SIZE-1) - stw r9, tlb_4xx_index@l(0) - -6: - /* - * Clear out the software-only bits in the PTE to generate the - * TLB_DATA value. These are the bottom 2 bits of the RPM, the - * top 3 bits of the zone field, and M. - */ - li r12, 0x0ce2 - andc r11, r11, r12 - - tlbwe r11, r9, TLB_DATA /* Load TLB LO */ - tlbwe r10, r9, TLB_TAG /* Load TLB HI */ - - /* Done...restore registers and get out of here. - */ -#ifdef CONFIG_403GCX - lwz r12, 12(r0) - lwz r11, 8(r0) - mtspr SPRN_PID, r12 - mtcr r11 - lwz r9, 4(r0) - lwz r12, 0(r0) -#else - mfspr r12, SPRN_SPRG6 - mfspr r11, SPRN_SPRG7 - mtspr SPRN_PID, r12 - mtcr r11 - mfspr r9, SPRN_SPRG5 - mfspr r12, SPRN_SPRG4 -#endif - mfspr r11, SPRN_SPRG1 - mfspr r10, SPRN_SPRG0 - PPC405_ERR77_SYNC - rfi /* Should sync shadow TLBs */ - b . /* prevent prefetch past rfi */ - -/* extern void giveup_fpu(struct task_struct *prev) - * - * The PowerPC 4xx family of processors do not have an FPU, so this just - * returns. - */ -_GLOBAL(giveup_fpu) - blr - -/* This is where the main kernel code starts. - */ -start_here: - - /* ptr to current */ - lis r2,init_task@h - ori r2,r2,init_task@l - - /* ptr to phys current thread */ - tophys(r4,r2) - addi r4,r4,THREAD /* init task's THREAD */ - mtspr SPRN_SPRG3,r4 - - /* stack */ - lis r1,init_thread_union@ha - addi r1,r1,init_thread_union@l - li r0,0 - stwu r0,THREAD_SIZE-STACK_FRAME_OVERHEAD(r1) - - bl early_init /* We have to do this with MMU on */ - -/* - * Decide what sort of machine this is and initialize the MMU. - */ - mr r3,r31 - mr r4,r30 - mr r5,r29 - mr r6,r28 - mr r7,r27 - bl machine_init - bl MMU_init - -/* Go back to running unmapped so we can load up new values - * and change to using our exception vectors. - * On the 4xx, all we have to do is invalidate the TLB to clear - * the old 16M byte TLB mappings. - */ - lis r4,2f@h - ori r4,r4,2f@l - tophys(r4,r4) - lis r3,(MSR_KERNEL & ~(MSR_IR|MSR_DR))@h - ori r3,r3,(MSR_KERNEL & ~(MSR_IR|MSR_DR))@l - mtspr SPRN_SRR0,r4 - mtspr SPRN_SRR1,r3 - rfi - b . /* prevent prefetch past rfi */ - -/* Load up the kernel context */ -2: - sync /* Flush to memory before changing TLB */ - tlbia - isync /* Flush shadow TLBs */ - - /* set up the PTE pointers for the Abatron bdiGDB. - */ - lis r6, swapper_pg_dir@h - ori r6, r6, swapper_pg_dir@l - lis r5, abatron_pteptrs@h - ori r5, r5, abatron_pteptrs@l - stw r5, 0xf0(r0) /* Must match your Abatron config file */ - tophys(r5,r5) - stw r6, 0(r5) - -/* Now turn on the MMU for real! */ - lis r4,MSR_KERNEL@h - ori r4,r4,MSR_KERNEL@l - lis r3,start_kernel@h - ori r3,r3,start_kernel@l - mtspr SPRN_SRR0,r3 - mtspr SPRN_SRR1,r4 - rfi /* enable MMU and jump to start_kernel */ - b . /* prevent prefetch past rfi */ - -/* Set up the initial MMU state so we can do the first level of - * kernel initialization. This maps the first 16 MBytes of memory 1:1 - * virtual to physical and more importantly sets the cache mode. - */ -initial_mmu: - tlbia /* Invalidate all TLB entries */ - isync - - /* We should still be executing code at physical address 0x0000xxxx - * at this point. However, start_here is at virtual address - * 0xC000xxxx. So, set up a TLB mapping to cover this once - * translation is enabled. - */ - - lis r3,KERNELBASE@h /* Load the kernel virtual address */ - ori r3,r3,KERNELBASE@l - tophys(r4,r3) /* Load the kernel physical address */ - - iccci r0,r3 /* Invalidate the i-cache before use */ - - /* Load the kernel PID. - */ - li r0,0 - mtspr SPRN_PID,r0 - sync - - /* Configure and load two entries into TLB slots 62 and 63. - * In case we are pinning TLBs, these are reserved in by the - * other TLB functions. If not reserving, then it doesn't - * matter where they are loaded. - */ - clrrwi r4,r4,10 /* Mask off the real page number */ - ori r4,r4,(TLB_WR | TLB_EX) /* Set the write and execute bits */ - - clrrwi r3,r3,10 /* Mask off the effective page number */ - ori r3,r3,(TLB_VALID | TLB_PAGESZ(PAGESZ_16M)) - - li r0,63 /* TLB slot 63 */ - - tlbwe r4,r0,TLB_DATA /* Load the data portion of the entry */ - tlbwe r3,r0,TLB_TAG /* Load the tag portion of the entry */ - -#if defined(CONFIG_SERIAL_TEXT_DEBUG) && defined(SERIAL_DEBUG_IO_BASE) - - /* Load a TLB entry for the UART, so that ppc4xx_progress() can use - * the UARTs nice and early. We use a 4k real==virtual mapping. */ - - lis r3,SERIAL_DEBUG_IO_BASE@h - ori r3,r3,SERIAL_DEBUG_IO_BASE@l - mr r4,r3 - clrrwi r4,r4,12 - ori r4,r4,(TLB_WR|TLB_I|TLB_M|TLB_G) - - clrrwi r3,r3,12 - ori r3,r3,(TLB_VALID | TLB_PAGESZ(PAGESZ_4K)) - - li r0,0 /* TLB slot 0 */ - tlbwe r4,r0,TLB_DATA - tlbwe r3,r0,TLB_TAG -#endif /* CONFIG_SERIAL_DEBUG_TEXT && SERIAL_DEBUG_IO_BASE */ - - isync - - /* Establish the exception vector base - */ - lis r4,KERNELBASE@h /* EVPR only uses the high 16-bits */ - tophys(r0,r4) /* Use the physical address */ - mtspr SPRN_EVPR,r0 - - blr - -_GLOBAL(abort) - mfspr r13,SPRN_DBCR0 - oris r13,r13,DBCR0_RST_SYSTEM@h - mtspr SPRN_DBCR0,r13 - -_GLOBAL(set_context) - -#ifdef CONFIG_BDI_SWITCH - /* Context switch the PTE pointer for the Abatron BDI2000. - * The PGDIR is the second parameter. - */ - lis r5, KERNELBASE@h - lwz r5, 0xf0(r5) - stw r4, 0x4(r5) -#endif - sync - mtspr SPRN_PID,r3 - isync /* Need an isync to flush shadow */ - /* TLBs after changing PID */ - blr - -/* We put a few things here that have to be page-aligned. This stuff - * goes at the beginning of the data segment, which is page-aligned. - */ - .data - .align 12 - .globl sdata -sdata: - .globl empty_zero_page -empty_zero_page: - .space 4096 - .globl swapper_pg_dir -swapper_pg_dir: - .space 4096 - - -/* Stack for handling critical exceptions from kernel mode */ - .section .bss - .align 12 -exception_stack_bottom: - .space 4096 -critical_stack_top: - .globl exception_stack_top -exception_stack_top: - -/* This space gets a copy of optional info passed to us by the bootstrap - * which is used to pass parameters into the kernel like root=/dev/sda1, etc. - */ - .globl cmd_line -cmd_line: - .space 512 - -/* Room for two PTE pointers, usually the kernel and current user pointers - * to their respective root page table. - */ -abatron_pteptrs: - .space 8 diff --git a/arch/powerpc/mm/40x_mmu.c b/arch/powerpc/mm/40x_mmu.c new file mode 100644 index 00000000000..7ff2609b64d --- /dev/null +++ b/arch/powerpc/mm/40x_mmu.c @@ -0,0 +1,135 @@ +/* + * This file contains the routines for initializing the MMU + * on the 4xx series of chips. + * -- paulus + * + * Derived from arch/ppc/mm/init.c: + * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org) + * + * Modifications by Paul Mackerras (PowerMac) (paulus@cs.anu.edu.au) + * and Cort Dougan (PReP) (cort@cs.nmt.edu) + * Copyright (C) 1996 Paul Mackerras + * + * Derived from "arch/i386/mm/init.c" + * Copyright (C) 1991, 1992, 1993, 1994 Linus Torvalds + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "mmu_decl.h" + +extern int __map_without_ltlbs; +/* + * MMU_init_hw does the chip-specific initialization of the MMU hardware. + */ +void __init MMU_init_hw(void) +{ + /* + * The Zone Protection Register (ZPR) defines how protection will + * be applied to every page which is a member of a given zone. At + * present, we utilize only two of the 4xx's zones. + * The zone index bits (of ZSEL) in the PTE are used for software + * indicators, except the LSB. For user access, zone 1 is used, + * for kernel access, zone 0 is used. We set all but zone 1 + * to zero, allowing only kernel access as indicated in the PTE. + * For zone 1, we set a 01 binary (a value of 10 will not work) + * to allow user access as indicated in the PTE. This also allows + * kernel access as indicated in the PTE. + */ + + mtspr(SPRN_ZPR, 0x10000000); + + flush_instruction_cache(); + + /* + * Set up the real-mode cache parameters for the exception vector + * handlers (which are run in real-mode). + */ + + mtspr(SPRN_DCWR, 0x00000000); /* All caching is write-back */ + + /* + * Cache instruction and data space where the exception + * vectors and the kernel live in real-mode. + */ + + mtspr(SPRN_DCCR, 0xF0000000); /* 512 MB of data space at 0x0. */ + mtspr(SPRN_ICCR, 0xF0000000); /* 512 MB of instr. space at 0x0. */ +} + +#define LARGE_PAGE_SIZE_16M (1<<24) +#define LARGE_PAGE_SIZE_4M (1<<22) + +unsigned long __init mmu_mapin_ram(void) +{ + unsigned long v, s; + phys_addr_t p; + + v = KERNELBASE; + p = PPC_MEMSTART; + s = 0; + + if (__map_without_ltlbs) { + return s; + } + + while (s <= (total_lowmem - LARGE_PAGE_SIZE_16M)) { + pmd_t *pmdp; + unsigned long val = p | _PMD_SIZE_16M | _PAGE_HWEXEC | _PAGE_HWWRITE; + + pmdp = pmd_offset(pgd_offset_k(v), v); + pmd_val(*pmdp++) = val; + pmd_val(*pmdp++) = val; + pmd_val(*pmdp++) = val; + pmd_val(*pmdp++) = val; + + v += LARGE_PAGE_SIZE_16M; + p += LARGE_PAGE_SIZE_16M; + s += LARGE_PAGE_SIZE_16M; + } + + while (s <= (total_lowmem - LARGE_PAGE_SIZE_4M)) { + pmd_t *pmdp; + unsigned long val = p | _PMD_SIZE_4M | _PAGE_HWEXEC | _PAGE_HWWRITE; + + pmdp = pmd_offset(pgd_offset_k(v), v); + pmd_val(*pmdp) = val; + + v += LARGE_PAGE_SIZE_4M; + p += LARGE_PAGE_SIZE_4M; + s += LARGE_PAGE_SIZE_4M; + } + + return s; +} diff --git a/arch/powerpc/mm/4xx_mmu.c b/arch/powerpc/mm/4xx_mmu.c deleted file mode 100644 index 7ff2609b64d..00000000000 --- a/arch/powerpc/mm/4xx_mmu.c +++ /dev/null @@ -1,135 +0,0 @@ -/* - * This file contains the routines for initializing the MMU - * on the 4xx series of chips. - * -- paulus - * - * Derived from arch/ppc/mm/init.c: - * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org) - * - * Modifications by Paul Mackerras (PowerMac) (paulus@cs.anu.edu.au) - * and Cort Dougan (PReP) (cort@cs.nmt.edu) - * Copyright (C) 1996 Paul Mackerras - * - * Derived from "arch/i386/mm/init.c" - * Copyright (C) 1991, 1992, 1993, 1994 Linus Torvalds - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - * - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include "mmu_decl.h" - -extern int __map_without_ltlbs; -/* - * MMU_init_hw does the chip-specific initialization of the MMU hardware. - */ -void __init MMU_init_hw(void) -{ - /* - * The Zone Protection Register (ZPR) defines how protection will - * be applied to every page which is a member of a given zone. At - * present, we utilize only two of the 4xx's zones. - * The zone index bits (of ZSEL) in the PTE are used for software - * indicators, except the LSB. For user access, zone 1 is used, - * for kernel access, zone 0 is used. We set all but zone 1 - * to zero, allowing only kernel access as indicated in the PTE. - * For zone 1, we set a 01 binary (a value of 10 will not work) - * to allow user access as indicated in the PTE. This also allows - * kernel access as indicated in the PTE. - */ - - mtspr(SPRN_ZPR, 0x10000000); - - flush_instruction_cache(); - - /* - * Set up the real-mode cache parameters for the exception vector - * handlers (which are run in real-mode). - */ - - mtspr(SPRN_DCWR, 0x00000000); /* All caching is write-back */ - - /* - * Cache instruction and data space where the exception - * vectors and the kernel live in real-mode. - */ - - mtspr(SPRN_DCCR, 0xF0000000); /* 512 MB of data space at 0x0. */ - mtspr(SPRN_ICCR, 0xF0000000); /* 512 MB of instr. space at 0x0. */ -} - -#define LARGE_PAGE_SIZE_16M (1<<24) -#define LARGE_PAGE_SIZE_4M (1<<22) - -unsigned long __init mmu_mapin_ram(void) -{ - unsigned long v, s; - phys_addr_t p; - - v = KERNELBASE; - p = PPC_MEMSTART; - s = 0; - - if (__map_without_ltlbs) { - return s; - } - - while (s <= (total_lowmem - LARGE_PAGE_SIZE_16M)) { - pmd_t *pmdp; - unsigned long val = p | _PMD_SIZE_16M | _PAGE_HWEXEC | _PAGE_HWWRITE; - - pmdp = pmd_offset(pgd_offset_k(v), v); - pmd_val(*pmdp++) = val; - pmd_val(*pmdp++) = val; - pmd_val(*pmdp++) = val; - pmd_val(*pmdp++) = val; - - v += LARGE_PAGE_SIZE_16M; - p += LARGE_PAGE_SIZE_16M; - s += LARGE_PAGE_SIZE_16M; - } - - while (s <= (total_lowmem - LARGE_PAGE_SIZE_4M)) { - pmd_t *pmdp; - unsigned long val = p | _PMD_SIZE_4M | _PAGE_HWEXEC | _PAGE_HWWRITE; - - pmdp = pmd_offset(pgd_offset_k(v), v); - pmd_val(*pmdp) = val; - - v += LARGE_PAGE_SIZE_4M; - p += LARGE_PAGE_SIZE_4M; - s += LARGE_PAGE_SIZE_4M; - } - - return s; -} diff --git a/arch/powerpc/mm/Makefile b/arch/powerpc/mm/Makefile index 7e4d27ad3de..bf20fa68880 100644 --- a/arch/powerpc/mm/Makefile +++ b/arch/powerpc/mm/Makefile @@ -13,7 +13,7 @@ obj-$(CONFIG_PPC64) += init_64.o pgtable_64.o mmu_context_64.o \ hash_utils_64.o hash_low_64.o tlb_64.o \ slb_low.o slb.o stab.o mmap.o $(hash-y) obj-$(CONFIG_PPC_STD_MMU_32) += ppc_mmu_32.o hash_low_32.o tlb_32.o -obj-$(CONFIG_40x) += 4xx_mmu.o +obj-$(CONFIG_40x) += 40x_mmu.o obj-$(CONFIG_44x) += 44x_mmu.o obj-$(CONFIG_FSL_BOOKE) += fsl_booke_mmu.o obj-$(CONFIG_NEED_MULTIPLE_NODES) += numa.o diff --git a/arch/powerpc/platforms/40x/Kconfig b/arch/powerpc/platforms/40x/Kconfig new file mode 100644 index 00000000000..ded357c1741 --- /dev/null +++ b/arch/powerpc/platforms/40x/Kconfig @@ -0,0 +1,208 @@ +config 4xx + bool + depends on 40x || 44x + default y + +config BOOKE + bool + depends on 44x + default y + +menu "AMCC 40x options" + depends on 40x + +#config BUBINGA +# bool "Bubinga" +# depends on 40x +# default n +# select 405EP +# help +# This option enables support for the IBM 405EP evaluation board. + +#config CPCI405 +# bool "CPCI405" +# depends on 40x +# default n +# select 405GP +# help +# This option enables support for the CPCI405 board. + +#config EP405 +# bool "EP405/EP405PC" +# depends on 40x +# default n +# select 405GP +# help +# This option enables support for the EP405/EP405PC boards. + +#config EP405PC +# bool "EP405PC Support" +# depends on EP405 +# default y +# help +# This option enables support for the extra features of the EP405PC board. + +#config REDWOOD_5 +# bool "Redwood-5" +# depends on 40x +# default n +# select STB03xxx +# help +# This option enables support for the IBM STB04 evaluation board. + +#config REDWOOD_6 +# bool "Redwood-6" +# depends on 40x +# default n +# select STB03xxx +# help +# This option enables support for the IBM STBx25xx evaluation board. + +#config SYCAMORE +# bool "Sycamore" +# depends on 40x +# default n +# select 405GPR +# help +# This option enables support for the IBM PPC405GPr evaluation board. + +#config WALNUT +# bool "Walnut" +# depends on 40x +# default y +# select 405GP +# help +# This option enables support for the IBM PPC405GP evaluation board. + +#config XILINX_ML300 +# bool "Xilinx-ML300" +# depends on 40x +# default y +# select VIRTEX_II_PRO +# help +# This option enables support for the Xilinx ML300 evaluation board. + +endmenu + +# 40x specific CPU modules, selected based on the board above. +config NP405H + bool + #depends on ASH + +# OAK doesn't exist but wanted to keep this around for any future 403GCX boards +config 403GCX + bool + #depends on OAK + select IBM405_ERR51 + +config 405GP + bool + select IBM405_ERR77 + select IBM405_ERR51 + +config 405EP + bool + +config 405GPR + bool + +config VIRTEX_II_PRO + bool + select IBM405_ERR77 + select IBM405_ERR51 + +config STB03xxx + bool + select IBM405_ERR77 + select IBM405_ERR51 + +# 40x errata/workaround config symbols, selected by the CPU models above + +# All 405-based cores up until the 405GPR and 405EP have this errata. +config IBM405_ERR77 + bool + +# All 40x-based cores, up until the 405GPR and 405EP have this errata. +config IBM405_ERR51 + bool + +menu "AMCC 44x options" + depends on 44x + +#config BAMBOO +# bool "Bamboo" +# depends on 44x +# default n +# select 440EP +# help +# This option enables support for the IBM PPC440EP evaluation board. + +config EBONY + bool "Ebony" + depends on 44x + default y + select 440GP + help + This option enables support for the IBM PPC440GP evaluation board. + +#config LUAN +# bool "Luan" +# depends on 44x +# default n +# select 440SP +# help +# This option enables support for the IBM PPC440SP evaluation board. + +#config OCOTEA +# bool "Ocotea" +# depends on 44x +# default n +# select 440GX +# help +# This option enables support for the IBM PPC440GX evaluation board. + +endmenu + +# 44x specific CPU modules, selected based on the board above. +config 440EP + bool + select PPC_FPU + select IBM440EP_ERR42 + +config 440GP + bool + select IBM_NEW_EMAC_ZMII + +config 440GX + bool + +config 440SP + bool + +config 440A + bool + depends on 440GX + default y + +# 44x errata/workaround config symbols, selected by the CPU models above +config IBM440EP_ERR42 + bool + +#config XILINX_OCP +# bool +# depends on XILINX_ML300 +# default y + +#config BIOS_FIXUP +# bool +# depends on BUBINGA || EP405 || SYCAMORE || WALNUT +# default y + +#config PPC4xx_DMA +# bool "PPC4xx DMA controller support" +# depends on 4xx + +#config PPC4xx_EDMA +# bool +# depends on !STB03xxx && PPC4xx_DMA +# default y diff --git a/arch/powerpc/platforms/40x/Makefile b/arch/powerpc/platforms/40x/Makefile new file mode 100644 index 00000000000..79ff6b1e887 --- /dev/null +++ b/arch/powerpc/platforms/40x/Makefile @@ -0,0 +1 @@ +# empty makefile so make clean works \ No newline at end of file diff --git a/arch/powerpc/platforms/4xx/Kconfig b/arch/powerpc/platforms/4xx/Kconfig deleted file mode 100644 index ded357c1741..00000000000 --- a/arch/powerpc/platforms/4xx/Kconfig +++ /dev/null @@ -1,208 +0,0 @@ -config 4xx - bool - depends on 40x || 44x - default y - -config BOOKE - bool - depends on 44x - default y - -menu "AMCC 40x options" - depends on 40x - -#config BUBINGA -# bool "Bubinga" -# depends on 40x -# default n -# select 405EP -# help -# This option enables support for the IBM 405EP evaluation board. - -#config CPCI405 -# bool "CPCI405" -# depends on 40x -# default n -# select 405GP -# help -# This option enables support for the CPCI405 board. - -#config EP405 -# bool "EP405/EP405PC" -# depends on 40x -# default n -# select 405GP -# help -# This option enables support for the EP405/EP405PC boards. - -#config EP405PC -# bool "EP405PC Support" -# depends on EP405 -# default y -# help -# This option enables support for the extra features of the EP405PC board. - -#config REDWOOD_5 -# bool "Redwood-5" -# depends on 40x -# default n -# select STB03xxx -# help -# This option enables support for the IBM STB04 evaluation board. - -#config REDWOOD_6 -# bool "Redwood-6" -# depends on 40x -# default n -# select STB03xxx -# help -# This option enables support for the IBM STBx25xx evaluation board. - -#config SYCAMORE -# bool "Sycamore" -# depends on 40x -# default n -# select 405GPR -# help -# This option enables support for the IBM PPC405GPr evaluation board. - -#config WALNUT -# bool "Walnut" -# depends on 40x -# default y -# select 405GP -# help -# This option enables support for the IBM PPC405GP evaluation board. - -#config XILINX_ML300 -# bool "Xilinx-ML300" -# depends on 40x -# default y -# select VIRTEX_II_PRO -# help -# This option enables support for the Xilinx ML300 evaluation board. - -endmenu - -# 40x specific CPU modules, selected based on the board above. -config NP405H - bool - #depends on ASH - -# OAK doesn't exist but wanted to keep this around for any future 403GCX boards -config 403GCX - bool - #depends on OAK - select IBM405_ERR51 - -config 405GP - bool - select IBM405_ERR77 - select IBM405_ERR51 - -config 405EP - bool - -config 405GPR - bool - -config VIRTEX_II_PRO - bool - select IBM405_ERR77 - select IBM405_ERR51 - -config STB03xxx - bool - select IBM405_ERR77 - select IBM405_ERR51 - -# 40x errata/workaround config symbols, selected by the CPU models above - -# All 405-based cores up until the 405GPR and 405EP have this errata. -config IBM405_ERR77 - bool - -# All 40x-based cores, up until the 405GPR and 405EP have this errata. -config IBM405_ERR51 - bool - -menu "AMCC 44x options" - depends on 44x - -#config BAMBOO -# bool "Bamboo" -# depends on 44x -# default n -# select 440EP -# help -# This option enables support for the IBM PPC440EP evaluation board. - -config EBONY - bool "Ebony" - depends on 44x - default y - select 440GP - help - This option enables support for the IBM PPC440GP evaluation board. - -#config LUAN -# bool "Luan" -# depends on 44x -# default n -# select 440SP -# help -# This option enables support for the IBM PPC440SP evaluation board. - -#config OCOTEA -# bool "Ocotea" -# depends on 44x -# default n -# select 440GX -# help -# This option enables support for the IBM PPC440GX evaluation board. - -endmenu - -# 44x specific CPU modules, selected based on the board above. -config 440EP - bool - select PPC_FPU - select IBM440EP_ERR42 - -config 440GP - bool - select IBM_NEW_EMAC_ZMII - -config 440GX - bool - -config 440SP - bool - -config 440A - bool - depends on 440GX - default y - -# 44x errata/workaround config symbols, selected by the CPU models above -config IBM440EP_ERR42 - bool - -#config XILINX_OCP -# bool -# depends on XILINX_ML300 -# default y - -#config BIOS_FIXUP -# bool -# depends on BUBINGA || EP405 || SYCAMORE || WALNUT -# default y - -#config PPC4xx_DMA -# bool "PPC4xx DMA controller support" -# depends on 4xx - -#config PPC4xx_EDMA -# bool -# depends on !STB03xxx && PPC4xx_DMA -# default y diff --git a/arch/powerpc/platforms/4xx/Makefile b/arch/powerpc/platforms/4xx/Makefile deleted file mode 100644 index 79ff6b1e887..00000000000 --- a/arch/powerpc/platforms/4xx/Makefile +++ /dev/null @@ -1 +0,0 @@ -# empty makefile so make clean works \ No newline at end of file -- cgit v1.2.3-70-g09d2