From c6c4d7bbbb498c38afa05688dfc2784948a0c4e2 Mon Sep 17 00:00:00 2001 From: Bryan Wu Date: Thu, 11 Oct 2007 01:20:06 +0800 Subject: Blackfin arch: update platform driver resource information to all board files Signed-off-by: Bryan Wu --- arch/blackfin/mach-bf533/boards/cm_bf533.c | 81 +++- arch/blackfin/mach-bf533/boards/ezkit.c | 91 ++++- arch/blackfin/mach-bf533/boards/stamp.c | 119 +++++- arch/blackfin/mach-bf537/boards/cm_bf537.c | 87 ++++- arch/blackfin/mach-bf537/boards/generic_board.c | 397 +++++++++++++++++--- arch/blackfin/mach-bf537/boards/pnav10.c | 53 ++- arch/blackfin/mach-bf537/boards/stamp.c | 142 +++++-- arch/blackfin/mach-bf548/boards/ezkit.c | 477 +++++++++++++++++++++++- arch/blackfin/mach-bf561/boards/cm_bf561.c | 84 ++++- arch/blackfin/mach-bf561/boards/ezkit.c | 82 +++- 10 files changed, 1448 insertions(+), 165 deletions(-) (limited to 'arch') diff --git a/arch/blackfin/mach-bf533/boards/cm_bf533.c b/arch/blackfin/mach-bf533/boards/cm_bf533.c index 4545f363e64..a57b52d207c 100644 --- a/arch/blackfin/mach-bf533/boards/cm_bf533.c +++ b/arch/blackfin/mach-bf533/boards/cm_bf533.c @@ -34,7 +34,9 @@ #include #include #include +#include #include +#include #include /* @@ -93,7 +95,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { /* the modalias must be the same as spi device driver name */ .modalias = "m25p80", /* Name of spi_driver for this device */ .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 1, /* Framework bus number */ + .bus_num = 0, /* Framework bus number */ .chip_select = 1, /* Framework chip select. On STAMP537 it is SPISSEL1*/ .platform_data = &bfin_spi_flash_data, .controller_data = &spi_flash_chip_info, @@ -101,7 +103,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }, { .modalias = "bfin_spi_adc", /* Name of spi_driver for this device */ .max_speed_hz = 6250000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 1, /* Framework bus number */ + .bus_num = 0, /* Framework bus number */ .chip_select = 2, /* Framework chip select. */ .platform_data = NULL, /* No spi_driver specific config */ .controller_data = &spi_adc_chip_info, @@ -110,24 +112,40 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { { .modalias = "ad1836-spi", .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 1, + .bus_num = 0, .chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT, .controller_data = &ad1836_spi_chip_info, }, #endif }; +/* SPI (0) */ +static struct resource bfin_spi0_resource[] = { + [0] = { + .start = SPI0_REGBASE, + .end = SPI0_REGBASE + 0xFF, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = CH_SPI, + .end = CH_SPI, + .flags = IORESOURCE_IRQ, + } +}; + /* SPI controller data */ -static struct bfin5xx_spi_master spi_bfin_master_info = { +static struct bfin5xx_spi_master bfin_spi0_info = { .num_chipselect = 8, .enable_dma = 1, /* master has the ability to do dma transfer */ }; -static struct platform_device spi_bfin_master_device = { - .name = "bfin-spi-master", - .id = 1, /* Bus number */ +static struct platform_device bfin_spi0_device = { + .name = "bfin-spi", + .id = 0, /* Bus number */ + .num_resources = ARRAY_SIZE(bfin_spi0_resource), + .resource = bfin_spi0_resource, .dev = { - .platform_data = &spi_bfin_master_info, /* Passed to driver */ + .platform_data = &bfin_spi0_info, /* Passed to driver */ }, }; #endif /* spi master and devices */ @@ -227,6 +245,43 @@ static struct platform_device isp1362_hcd_device = { }; #endif +#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) +#define PATA_INT 38 + +static struct pata_platform_info bfin_pata_platform_data = { + .ioport_shift = 2, + .irq_type = IRQF_TRIGGER_HIGH | IRQF_DISABLED, +}; + +static struct resource bfin_pata_resources[] = { + { + .start = 0x2030C000, + .end = 0x2030C01F, + .flags = IORESOURCE_MEM, + }, + { + .start = 0x2030D018, + .end = 0x2030D01B, + .flags = IORESOURCE_MEM, + }, + { + .start = PATA_INT, + .end = PATA_INT, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device bfin_pata_device = { + .name = "pata_platform", + .id = -1, + .num_resources = ARRAY_SIZE(bfin_pata_resources), + .resource = bfin_pata_resources, + .dev = { + .platform_data = &bfin_pata_platform_data, + } +}; +#endif + static struct platform_device *cm_bf533_devices[] __initdata = { #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) &bfin_uart_device, @@ -250,7 +305,11 @@ static struct platform_device *cm_bf533_devices[] __initdata = { #endif #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) - &spi_bfin_master_device, + &bfin_spi0_device, +#endif + +#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) + &bfin_pata_device, #endif }; @@ -261,6 +320,10 @@ static int __init cm_bf533_init(void) #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info)); #endif + +#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) + irq_desc[PATA_INT].status |= IRQ_NOAUTOEN; +#endif return 0; } diff --git a/arch/blackfin/mach-bf533/boards/ezkit.c b/arch/blackfin/mach-bf533/boards/ezkit.c index 0000b8f1239..5c1e35d3c01 100644 --- a/arch/blackfin/mach-bf533/boards/ezkit.c +++ b/arch/blackfin/mach-bf533/boards/ezkit.c @@ -35,7 +35,9 @@ #include #include #include +#include #include +#include #include /* @@ -50,6 +52,12 @@ static struct platform_device rtc_device = { }; #endif +#if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE) +static struct platform_device bfin_fb_adv7393_device = { + .name = "bfin-adv7393", +}; +#endif + /* * USB-LAN EzExtender board * Driver needs to know address, irq and flag pin. @@ -131,7 +139,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { /* the modalias must be the same as spi device driver name */ .modalias = "m25p80", /* Name of spi_driver for this device */ .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 1, /* Framework bus number */ + .bus_num = 0, /* Framework bus number */ .chip_select = 2, /* Framework chip select. On STAMP537 it is SPISSEL2*/ .platform_data = &bfin_spi_flash_data, .controller_data = &spi_flash_chip_info, @@ -143,7 +151,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { { .modalias = "bfin_spi_adc", /* Name of spi_driver for this device */ .max_speed_hz = 6250000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 1, /* Framework bus number */ + .bus_num = 0, /* Framework bus number */ .chip_select = 1, /* Framework chip select. */ .platform_data = NULL, /* No spi_driver specific config */ .controller_data = &spi_adc_chip_info, @@ -154,24 +162,40 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { { .modalias = "ad1836-spi", .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 1, + .bus_num = 0, .chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT, .controller_data = &ad1836_spi_chip_info, }, #endif }; +/* SPI (0) */ +static struct resource bfin_spi0_resource[] = { + [0] = { + .start = SPI0_REGBASE, + .end = SPI0_REGBASE + 0xFF, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = CH_SPI, + .end = CH_SPI, + .flags = IORESOURCE_IRQ, + } +}; + /* SPI controller data */ -static struct bfin5xx_spi_master spi_bfin_master_info = { +static struct bfin5xx_spi_master bfin_spi0_info = { .num_chipselect = 8, .enable_dma = 1, /* master has the ability to do dma transfer */ }; -static struct platform_device spi_bfin_master_device = { - .name = "bfin-spi-master", - .id = 1, /* Bus number */ +static struct platform_device bfin_spi0_device = { + .name = "bfin-spi", + .id = 0, /* Bus number */ + .num_resources = ARRAY_SIZE(bfin_spi0_resource), + .resource = bfin_spi0_resource, .dev = { - .platform_data = &spi_bfin_master_info, /* Passed to driver */ + .platform_data = &bfin_spi0_info, /* Passed to driver */ }, }; #endif /* spi master and devices */ @@ -193,13 +217,54 @@ static struct platform_device bfin_uart_device = { }; #endif +#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) +#define PATA_INT 55 + +static struct pata_platform_info bfin_pata_platform_data = { + .ioport_shift = 1, + .irq_type = IRQF_TRIGGER_HIGH | IRQF_DISABLED, +}; + +static struct resource bfin_pata_resources[] = { + { + .start = 0x20314020, + .end = 0x2031403F, + .flags = IORESOURCE_MEM, + }, + { + .start = 0x2031401C, + .end = 0x2031401F, + .flags = IORESOURCE_MEM, + }, + { + .start = PATA_INT, + .end = PATA_INT, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device bfin_pata_device = { + .name = "pata_platform", + .id = -1, + .num_resources = ARRAY_SIZE(bfin_pata_resources), + .resource = bfin_pata_resources, + .dev = { + .platform_data = &bfin_pata_platform_data, + } +}; +#endif + static struct platform_device *ezkit_devices[] __initdata = { #if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) &smc91x_device, #endif #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) - &spi_bfin_master_device, + &bfin_spi0_device, +#endif + +#if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE) + &bfin_fb_adv7393_device, #endif #if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) @@ -209,6 +274,10 @@ static struct platform_device *ezkit_devices[] __initdata = { #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) &bfin_uart_device, #endif + +#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) + &bfin_pata_device, +#endif }; static int __init ezkit_init(void) @@ -218,6 +287,10 @@ static int __init ezkit_init(void) #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info)); #endif + +#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) + irq_desc[PATA_INT].status |= IRQ_NOAUTOEN; +#endif return 0; } diff --git a/arch/blackfin/mach-bf533/boards/stamp.c b/arch/blackfin/mach-bf533/boards/stamp.c index a9143c4cbdc..8975e06ea15 100644 --- a/arch/blackfin/mach-bf533/boards/stamp.c +++ b/arch/blackfin/mach-bf533/boards/stamp.c @@ -37,8 +37,11 @@ #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) #include #endif +#include #include +#include #include +#include /* * Name the Board for the /proc/cpuinfo @@ -77,6 +80,12 @@ static struct platform_device smc91x_device = { }; #endif +#if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE) +static struct platform_device bfin_fb_adv7393_device = { + .name = "bfin-adv7393", +}; +#endif + #if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE) static struct resource net2272_bfin_resources[] = { { @@ -177,7 +186,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { /* the modalias must be the same as spi device driver name */ .modalias = "m25p80", /* Name of spi_driver for this device */ .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 1, /* Framework bus number */ + .bus_num = 0, /* Framework bus number */ .chip_select = 2, /* Framework chip select. On STAMP537 it is SPISSEL2*/ .platform_data = &bfin_spi_flash_data, .controller_data = &spi_flash_chip_info, @@ -189,7 +198,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { { .modalias = "bfin_spi_adc", /* Name of spi_driver for this device */ .max_speed_hz = 6250000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 1, /* Framework bus number */ + .bus_num = 0, /* Framework bus number */ .chip_select = 1, /* Framework chip select. */ .platform_data = NULL, /* No spi_driver specific config */ .controller_data = &spi_adc_chip_info, @@ -200,7 +209,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { { .modalias = "ad1836-spi", .max_speed_hz = 31250000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 1, + .bus_num = 0, .chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT, .controller_data = &ad1836_spi_chip_info, }, @@ -210,7 +219,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { { .modalias = "spi_mmc_dummy", .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 1, + .bus_num = 0, .chip_select = 0, .platform_data = NULL, .controller_data = &spi_mmc_chip_info, @@ -219,7 +228,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { { .modalias = "spi_mmc", .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 1, + .bus_num = 0, .chip_select = CONFIG_SPI_MMC_CS_CHAN, .platform_data = NULL, .controller_data = &spi_mmc_chip_info, @@ -231,16 +240,16 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { { .modalias = "fxs-spi", .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 1, - .chip_select = 3, + .bus_num = 0, + .chip_select = 8 - CONFIG_J11_JUMPER, .controller_data = &spi_si3xxx_chip_info, .mode = SPI_MODE_3, }, { .modalias = "fxo-spi", .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 1, - .chip_select = 2, + .bus_num = 0, + .chip_select = 8 - CONFIG_J19_JUMPER, .controller_data = &spi_si3xxx_chip_info, .mode = SPI_MODE_3, }, @@ -250,7 +259,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { { .modalias = "ad5304_spi", .max_speed_hz = 1000000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 1, + .bus_num = 0, .chip_select = 2, .platform_data = NULL, .controller_data = &ad5304_chip_info, @@ -259,17 +268,33 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { #endif }; +/* SPI (0) */ +static struct resource bfin_spi0_resource[] = { + [0] = { + .start = SPI0_REGBASE, + .end = SPI0_REGBASE + 0xFF, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = CH_SPI, + .end = CH_SPI, + .flags = IORESOURCE_IRQ, + } +}; + /* SPI controller data */ -static struct bfin5xx_spi_master spi_bfin_master_info = { +static struct bfin5xx_spi_master bfin_spi0_info = { .num_chipselect = 8, .enable_dma = 1, /* master has the ability to do dma transfer */ }; -static struct platform_device spi_bfin_master_device = { - .name = "bfin-spi-master", - .id = 1, /* Bus number */ +static struct platform_device bfin_spi0_device = { + .name = "bfin-spi", + .id = 0, /* Bus number */ + .num_resources = ARRAY_SIZE(bfin_spi0_resource), + .resource = bfin_spi0_resource, .dev = { - .platform_data = &spi_bfin_master_info, /* Passed to driver */ + .platform_data = &bfin_spi0_info, /* Passed to driver */ }, }; #endif /* spi master and devices */ @@ -309,6 +334,43 @@ static struct platform_device bfin_sport1_uart_device = { }; #endif +#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) +#define PATA_INT 55 + +static struct pata_platform_info bfin_pata_platform_data = { + .ioport_shift = 1, + .irq_type = IRQF_TRIGGER_HIGH | IRQF_DISABLED, +}; + +static struct resource bfin_pata_resources[] = { + { + .start = 0x20314020, + .end = 0x2031403F, + .flags = IORESOURCE_MEM, + }, + { + .start = 0x2031401C, + .end = 0x2031401F, + .flags = IORESOURCE_MEM, + }, + { + .start = PATA_INT, + .end = PATA_INT, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device bfin_pata_device = { + .name = "pata_platform", + .id = -1, + .num_resources = ARRAY_SIZE(bfin_pata_resources), + .resource = bfin_pata_resources, + .dev = { + .platform_data = &bfin_pata_platform_data, + } +}; +#endif + static struct platform_device *stamp_devices[] __initdata = { #if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) &rtc_device, @@ -318,12 +380,16 @@ static struct platform_device *stamp_devices[] __initdata = { &smc91x_device, #endif +#if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE) + &bfin_fb_adv7393_device, +#endif + #if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE) &net2272_bfin_device, #endif #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) - &spi_bfin_master_device, + &bfin_spi0_device, #endif #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) @@ -334,6 +400,10 @@ static struct platform_device *stamp_devices[] __initdata = { &bfin_sport0_uart_device, &bfin_sport1_uart_device, #endif + +#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) + &bfin_pata_device, +#endif }; static int __init stamp_init(void) @@ -355,8 +425,23 @@ static int __init stamp_init(void) #endif #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) - return spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info)); + spi_register_board_info(bfin_spi_board_info, + ARRAY_SIZE(bfin_spi_board_info)); +#endif +#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) + irq_desc[PATA_INT].status |= IRQ_NOAUTOEN; #endif + return 0; } arch_initcall(stamp_init); + +void native_machine_restart(char *cmd) +{ +#if defined(CONFIG_BFIN_SHARED_FLASH_ENET) +# define BIT_TO_SET (1 << CONFIG_ENET_FLASH_PIN) + bfin_write_FIO_INEN(~BIT_TO_SET); + bfin_write_FIO_DIR(BIT_TO_SET); + bfin_write_FIO_FLAG_C(BIT_TO_SET); +#endif +} diff --git a/arch/blackfin/mach-bf537/boards/cm_bf537.c b/arch/blackfin/mach-bf537/boards/cm_bf537.c index a8f947b7275..44dea05e1d0 100644 --- a/arch/blackfin/mach-bf537/boards/cm_bf537.c +++ b/arch/blackfin/mach-bf537/boards/cm_bf537.c @@ -35,7 +35,9 @@ #include #include #include +#include #include +#include #include /* @@ -113,7 +115,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { /* the modalias must be the same as spi device driver name */ .modalias = "m25p80", /* Name of spi_driver for this device */ .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 1, /* Framework bus number */ + .bus_num = 0, /* Framework bus number */ .chip_select = 1, /* Framework chip select. On STAMP537 it is SPISSEL1*/ .platform_data = &bfin_spi_flash_data, .controller_data = &spi_flash_chip_info, @@ -125,7 +127,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { { .modalias = "bfin_spi_adc", /* Name of spi_driver for this device */ .max_speed_hz = 6250000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 1, /* Framework bus number */ + .bus_num = 0, /* Framework bus number */ .chip_select = 1, /* Framework chip select. */ .platform_data = NULL, /* No spi_driver specific config */ .controller_data = &spi_adc_chip_info, @@ -136,7 +138,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { { .modalias = "ad1836-spi", .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 1, + .bus_num = 0, .chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT, .controller_data = &ad1836_spi_chip_info, }, @@ -146,7 +148,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { { .modalias = "ad9960-spi", .max_speed_hz = 10000000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 1, + .bus_num = 0, .chip_select = 1, .controller_data = &ad9960_spi_chip_info, }, @@ -156,7 +158,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { { .modalias = "spi_mmc_dummy", .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 1, + .bus_num = 0, .chip_select = 7, .platform_data = NULL, .controller_data = &spi_mmc_chip_info, @@ -165,7 +167,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { { .modalias = "spi_mmc", .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 1, + .bus_num = 0, .chip_select = CONFIG_SPI_MMC_CS_CHAN, .platform_data = NULL, .controller_data = &spi_mmc_chip_info, @@ -174,17 +176,33 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { #endif }; +/* SPI (0) */ +static struct resource bfin_spi0_resource[] = { + [0] = { + .start = SPI0_REGBASE, + .end = SPI0_REGBASE + 0xFF, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = CH_SPI, + .end = CH_SPI, + .flags = IORESOURCE_IRQ, + } +}; + /* SPI controller data */ -static struct bfin5xx_spi_master spi_bfin_master_info = { +static struct bfin5xx_spi_master bfin_spi0_info = { .num_chipselect = 8, .enable_dma = 1, /* master has the ability to do dma transfer */ }; -static struct platform_device spi_bfin_master_device = { - .name = "bfin-spi-master", - .id = 1, /* Bus number */ +static struct platform_device bfin_spi0_device = { + .name = "bfin-spi", + .id = 0, /* Bus number */ + .num_resources = ARRAY_SIZE(bfin_spi0_resource), + .resource = bfin_spi0_resource, .dev = { - .platform_data = &spi_bfin_master_info, /* Passed to driver */ + .platform_data = &bfin_spi0_info, /* Passed to driver */ }, }; #endif /* spi master and devices */ @@ -316,6 +334,43 @@ static struct platform_device bfin_mac_device = { }; #endif +#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) +#define PATA_INT 64 + +static struct pata_platform_info bfin_pata_platform_data = { + .ioport_shift = 2, + .irq_type = IRQF_TRIGGER_HIGH | IRQF_DISABLED, +}; + +static struct resource bfin_pata_resources[] = { + { + .start = 0x2030C000, + .end = 0x2030C01F, + .flags = IORESOURCE_MEM, + }, + { + .start = 0x2030D018, + .end = 0x2030D01B, + .flags = IORESOURCE_MEM, + }, + { + .start = PATA_INT, + .end = PATA_INT, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device bfin_pata_device = { + .name = "pata_platform", + .id = -1, + .num_resources = ARRAY_SIZE(bfin_pata_resources), + .resource = bfin_pata_resources, + .dev = { + .platform_data = &bfin_pata_platform_data, + } +}; +#endif + static struct platform_device *cm_bf537_devices[] __initdata = { #if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) &rtc_device, @@ -347,7 +402,11 @@ static struct platform_device *cm_bf537_devices[] __initdata = { #endif #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) - &spi_bfin_master_device, + &bfin_spi0_device, +#endif + +#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) + &bfin_pata_device, #endif }; @@ -358,6 +417,10 @@ static int __init cm_bf537_init(void) #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info)); #endif + +#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) + irq_desc[PATA_INT].status |= IRQ_NOAUTOEN; +#endif return 0; } diff --git a/arch/blackfin/mach-bf537/boards/generic_board.c b/arch/blackfin/mach-bf537/boards/generic_board.c index 648d984e98d..5e9d09eb857 100644 --- a/arch/blackfin/mach-bf537/boards/generic_board.c +++ b/arch/blackfin/mach-bf537/boards/generic_board.c @@ -8,7 +8,7 @@ * * Modified: * Copyright 2005 National ICT Australia (NICTA) - * Copyright 2004-2006 Analog Devices Inc. + * Copyright 2004-2007 Analog Devices Inc. * * Bugs: Enter bugs at http://blackfin.uclinux.org/ * @@ -34,20 +34,74 @@ #include #include #include +#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) #include +#endif +#include #include +#include #include +#include #include +#include +#include /* * Name the Board for the /proc/cpuinfo */ -char *bfin_board_name = "UNKNOWN BOARD"; +char *bfin_board_name = "GENERIC Board"; /* * Driver needs to know address, irq and flag pin. */ +#define ISP1761_BASE 0x203C0000 +#define ISP1761_IRQ IRQ_PF7 + +#if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE) +static struct resource bfin_isp1761_resources[] = { + [0] = { + .name = "isp1761-regs", + .start = ISP1761_BASE + 0x00000000, + .end = ISP1761_BASE + 0x000fffff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = ISP1761_IRQ, + .end = ISP1761_IRQ, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device bfin_isp1761_device = { + .name = "isp1761", + .id = 0, + .num_resources = ARRAY_SIZE(bfin_isp1761_resources), + .resource = bfin_isp1761_resources, +}; + +static struct platform_device *bfin_isp1761_devices[] = { + &bfin_isp1761_device, +}; + +int __init bfin_isp1761_init(void) +{ + unsigned int num_devices = ARRAY_SIZE(bfin_isp1761_devices); + + printk(KERN_INFO "%s(): registering device resources\n", __FUNCTION__); + set_irq_type(ISP1761_IRQ, IRQF_TRIGGER_FALLING); + + return platform_add_devices(bfin_isp1761_devices, num_devices); +} + +void __exit bfin_isp1761_exit(void) +{ + platform_device_unregister(&bfin_isp1761_device); +} + +arch_initcall(bfin_isp1761_init); +#endif + #if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE) static struct resource bfin_pcmcia_cf_resources[] = { { @@ -58,10 +112,6 @@ static struct resource bfin_pcmcia_cf_resources[] = { .start = 0x20311000, /* Attribute Memory */ .end = 0x20311FFF, .flags = IORESOURCE_MEM, - }, { - .start = IRQ_PROG_INTA, - .end = IRQ_PROG_INTA, - .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL, }, { .start = IRQ_PF4, .end = IRQ_PF4, @@ -96,14 +146,7 @@ static struct resource smc91x_resources[] = { .end = 0x20300300 + 16, .flags = IORESOURCE_MEM, }, { - .start = IRQ_PROG_INTB, - .end = IRQ_PROG_INTB, - .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, - }, { - /* - * denotes the flag pin and is used directly if - * CONFIG_IRQCHIP_DEMUX_GPIO is defined. - */ + .start = IRQ_PF7, .end = IRQ_PF7, .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, @@ -117,6 +160,28 @@ static struct platform_device smc91x_device = { }; #endif +#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE) +static struct resource dm9000_resources[] = { + [0] = { + .start = 0x203FB800, + .end = 0x203FB800 + 8, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_PF9, + .end = IRQ_PF9, + .flags = (IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE), + }, +}; + +static struct platform_device dm9000_device = { + .name = "dm9000", + .id = -1, + .num_resources = ARRAY_SIZE(dm9000_resources), + .resource = dm9000_resources, +}; +#endif + #if defined(CONFIG_USB_SL811_HCD) || defined(CONFIG_USB_SL811_HCD_MODULE) static struct resource sl811_hcd_resources[] = { { @@ -128,12 +193,8 @@ static struct resource sl811_hcd_resources[] = { .end = 0x20340004, .flags = IORESOURCE_MEM, }, { - .start = IRQ_PROG_INTA, - .end = IRQ_PROG_INTA, - .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, - }, { - .start = IRQ_PF0 + CONFIG_USB_SL811_BFIN_GPIO, - .end = IRQ_PF0 + CONFIG_USB_SL811_BFIN_GPIO, + .start = CONFIG_USB_SL811_BFIN_IRQ, + .end = CONFIG_USB_SL811_BFIN_IRQ, .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, }, }; @@ -141,21 +202,19 @@ static struct resource sl811_hcd_resources[] = { #if defined(CONFIG_USB_SL811_BFIN_USE_VBUS) void sl811_port_power(struct device *dev, int is_on) { - unsigned short mask = (1< #endif #include +#include #include #include @@ -130,15 +131,13 @@ static struct resource sl811_hcd_resources[] = { #if defined(CONFIG_USB_SL811_BFIN_USE_VBUS) void sl811_port_power(struct device *dev, int is_on) { - unsigned short mask = (1 << CONFIG_USB_SL811_BFIN_GPIO_VBUS); - - bfin_write_PORT_FER(bfin_read_PORT_FER() & ~mask); - bfin_write_FIO_DIR(bfin_read_FIO_DIR() | mask); + gpio_request(CONFIG_USB_SL811_BFIN_GPIO_VBUS, "usb:SL811_VBUS"); + gpio_direction_output(CONFIG_USB_SL811_BFIN_GPIO_VBUS); if (is_on) - bfin_write_FIO_FLAG_S(mask); + gpio_set_value(CONFIG_USB_SL811_BFIN_GPIO_VBUS, 1); else - bfin_write_FIO_FLAG_C(mask); + gpio_set_value(CONFIG_USB_SL811_BFIN_GPIO_VBUS, 0); } #endif @@ -323,7 +322,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { /* the modalias must be the same as spi device driver name */ .modalias = "m25p80", /* Name of spi_driver for this device */ .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 1, /* Framework bus number */ + .bus_num = 0, /* Framework bus number */ .chip_select = 1, /* Framework chip select. On STAMP537 it is SPISSEL1*/ .platform_data = &bfin_spi_flash_data, .controller_data = &spi_flash_chip_info, @@ -336,7 +335,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { { .modalias = "bfin_spi_adc", /* Name of spi_driver for this device */ .max_speed_hz = 6250000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 1, /* Framework bus number */ + .bus_num = 0, /* Framework bus number */ .chip_select = 1, /* Framework chip select. */ .platform_data = NULL, /* No spi_driver specific config */ .controller_data = &spi_adc_chip_info, @@ -348,7 +347,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { { .modalias = "ad1836-spi", .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 1, + .bus_num = 0, .chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT, .controller_data = &ad1836_spi_chip_info, }, @@ -357,7 +356,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { { .modalias = "ad9960-spi", .max_speed_hz = 10000000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 1, + .bus_num = 0, .chip_select = 1, .controller_data = &ad9960_spi_chip_info, }, @@ -366,7 +365,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { { .modalias = "spi_mmc_dummy", .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 1, + .bus_num = 0, .chip_select = 7, .platform_data = NULL, .controller_data = &spi_mmc_chip_info, @@ -375,7 +374,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { { .modalias = "spi_mmc", .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 1, + .bus_num = 0, .chip_select = CONFIG_SPI_MMC_CS_CHAN, .platform_data = NULL, .controller_data = &spi_mmc_chip_info, @@ -396,24 +395,40 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }; +/* SPI (0) */ +static struct resource bfin_spi0_resource[] = { + [0] = { + .start = SPI0_REGBASE, + .end = SPI0_REGBASE + 0xFF, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = CH_SPI, + .end = CH_SPI, + .flags = IORESOURCE_IRQ, + } +}; + /* SPI controller data */ -static struct bfin5xx_spi_master spi_bfin_master_info = { +static struct bfin5xx_spi_master bfin_spi0_info = { .num_chipselect = 8, .enable_dma = 1, /* master has the ability to do dma transfer */ }; -static struct platform_device spi_bfin_master_device = { - .name = "bfin-spi-master", - .id = 1, /* Bus number */ +static struct platform_device bfin_spi0_device = { + .name = "bfin-spi", + .id = 0, /* Bus number */ + .num_resources = ARRAY_SIZE(bfin_spi0_resource), + .resource = bfin_spi0_resource, .dev = { - .platform_data = &spi_bfin_master_info, /* Passed to driver */ + .platform_data = &bfin_spi0_info, /* Passed to driver */ }, }; #endif /* spi master and devices */ #if defined(CONFIG_FB_BF537_LQ035) || defined(CONFIG_FB_BF537_LQ035_MODULE) static struct platform_device bfin_fb_device = { - .name = "bf537-fb", + .name = "bf537-lq035", }; #endif @@ -469,7 +484,7 @@ static struct platform_device *stamp_devices[] __initdata = { #endif #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) - &spi_bfin_master_device, + &bfin_spi0_device, #endif #if defined(CONFIG_FB_BF537_LQ035) || defined(CONFIG_FB_BF537_LQ035_MODULE) diff --git a/arch/blackfin/mach-bf537/boards/stamp.c b/arch/blackfin/mach-bf537/boards/stamp.c index 9c43d775651..47d7d4a0e73 100644 --- a/arch/blackfin/mach-bf537/boards/stamp.c +++ b/arch/blackfin/mach-bf537/boards/stamp.c @@ -37,10 +37,13 @@ #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) #include #endif +#include #include #include #include +#include #include +#include #include /* @@ -199,15 +202,13 @@ static struct resource sl811_hcd_resources[] = { #if defined(CONFIG_USB_SL811_BFIN_USE_VBUS) void sl811_port_power(struct device *dev, int is_on) { - unsigned short mask = (1 << CONFIG_USB_SL811_BFIN_GPIO_VBUS); - - bfin_write_PORT_FER(bfin_read_PORT_FER() & ~mask); - bfin_write_FIO_DIR(bfin_read_FIO_DIR() | mask); + gpio_request(CONFIG_USB_SL811_BFIN_GPIO_VBUS, "usb:SL811_VBUS"); + gpio_direction_output(CONFIG_USB_SL811_BFIN_GPIO_VBUS); if (is_on) - bfin_write_FIO_FLAG_S(mask); + gpio_set_value(CONFIG_USB_SL811_BFIN_GPIO_VBUS, 1); else - bfin_write_FIO_FLAG_C(mask); + gpio_set_value(CONFIG_USB_SL811_BFIN_GPIO_VBUS, 0); } #endif @@ -407,7 +408,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { /* the modalias must be the same as spi device driver name */ .modalias = "m25p80", /* Name of spi_driver for this device */ .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 1, /* Framework bus number */ + .bus_num = 0, /* Framework bus number */ .chip_select = 1, /* Framework chip select. On STAMP537 it is SPISSEL1*/ .platform_data = &bfin_spi_flash_data, .controller_data = &spi_flash_chip_info, @@ -420,7 +421,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { { .modalias = "bfin_spi_adc", /* Name of spi_driver for this device */ .max_speed_hz = 6250000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 1, /* Framework bus number */ + .bus_num = 0, /* Framework bus number */ .chip_select = 1, /* Framework chip select. */ .platform_data = NULL, /* No spi_driver specific config */ .controller_data = &spi_adc_chip_info, @@ -432,7 +433,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { { .modalias = "ad1836-spi", .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 1, + .bus_num = 0, .chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT, .controller_data = &ad1836_spi_chip_info, }, @@ -441,7 +442,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { { .modalias = "ad9960-spi", .max_speed_hz = 10000000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 1, + .bus_num = 0, .chip_select = 1, .controller_data = &ad9960_spi_chip_info, }, @@ -450,7 +451,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { { .modalias = "spi_mmc_dummy", .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 1, + .bus_num = 0, .chip_select = 0, .platform_data = NULL, .controller_data = &spi_mmc_chip_info, @@ -459,7 +460,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { { .modalias = "spi_mmc", .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 1, + .bus_num = 0, .chip_select = CONFIG_SPI_MMC_CS_CHAN, .platform_data = NULL, .controller_data = &spi_mmc_chip_info, @@ -470,16 +471,16 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { { .modalias = "fxs-spi", .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 1, - .chip_select = 3, + .bus_num = 0, + .chip_select = 8 - CONFIG_J11_JUMPER, .controller_data = &spi_si3xxx_chip_info, .mode = SPI_MODE_3, }, { .modalias = "fxo-spi", .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 1, - .chip_select = 2, + .bus_num = 0, + .chip_select = 8 - CONFIG_J19_JUMPER, .controller_data = &spi_si3xxx_chip_info, .mode = SPI_MODE_3, }, @@ -488,7 +489,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { { .modalias = "ad5304_spi", .max_speed_hz = 1250000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 1, + .bus_num = 0, .chip_select = 2, .platform_data = NULL, .controller_data = &ad5304_chip_info, @@ -509,23 +510,45 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }; /* SPI controller data */ -static struct bfin5xx_spi_master spi_bfin_master_info = { +static struct bfin5xx_spi_master bfin_spi0_info = { .num_chipselect = 8, .enable_dma = 1, /* master has the ability to do dma transfer */ }; -static struct platform_device spi_bfin_master_device = { - .name = "bfin-spi-master", - .id = 1, /* Bus number */ +/* SPI (0) */ +static struct resource bfin_spi0_resource[] = { + [0] = { + .start = SPI0_REGBASE, + .end = SPI0_REGBASE + 0xFF, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = CH_SPI, + .end = CH_SPI, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device bfin_spi0_device = { + .name = "bfin-spi", + .id = 0, /* Bus number */ + .num_resources = ARRAY_SIZE(bfin_spi0_resource), + .resource = bfin_spi0_resource, .dev = { - .platform_data = &spi_bfin_master_info, /* Passed to driver */ + .platform_data = &bfin_spi0_info, /* Passed to driver */ }, }; #endif /* spi master and devices */ #if defined(CONFIG_FB_BF537_LQ035) || defined(CONFIG_FB_BF537_LQ035_MODULE) static struct platform_device bfin_fb_device = { - .name = "bf537-fb", + .name = "bf537-lq035", +}; +#endif + +#if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE) +static struct platform_device bfin_fb_adv7393_device = { + .name = "bfin-adv7393", }; #endif @@ -551,9 +574,24 @@ static struct platform_device bfin_uart_device = { #endif #if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) +static struct resource bfin_twi0_resource[] = { + [0] = { + .start = TWI0_REGBASE, + .end = TWI0_REGBASE, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_TWI, + .end = IRQ_TWI, + .flags = IORESOURCE_IRQ, + }, +}; + static struct platform_device i2c_bfin_twi_device = { .name = "i2c-bfin-twi", .id = 0, + .num_resources = ARRAY_SIZE(bfin_twi0_resource), + .resource = bfin_twi0_resource, }; #endif @@ -569,6 +607,43 @@ static struct platform_device bfin_sport1_uart_device = { }; #endif +#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) +#define PATA_INT 55 + +static struct pata_platform_info bfin_pata_platform_data = { + .ioport_shift = 1, + .irq_type = IRQF_TRIGGER_HIGH | IRQF_DISABLED, +}; + +static struct resource bfin_pata_resources[] = { + { + .start = 0x20314020, + .end = 0x2031403F, + .flags = IORESOURCE_MEM, + }, + { + .start = 0x2031401C, + .end = 0x2031401F, + .flags = IORESOURCE_MEM, + }, + { + .start = PATA_INT, + .end = PATA_INT, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device bfin_pata_device = { + .name = "pata_platform", + .id = -1, + .num_resources = ARRAY_SIZE(bfin_pata_resources), + .resource = bfin_pata_resources, + .dev = { + .platform_data = &bfin_pata_platform_data, + } +}; +#endif + static struct platform_device *stamp_devices[] __initdata = { #if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE) &bfin_pcmcia_cf_device, @@ -603,13 +678,17 @@ static struct platform_device *stamp_devices[] __initdata = { #endif #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) - &spi_bfin_master_device, + &bfin_spi0_device, #endif #if defined(CONFIG_FB_BF537_LQ035) || defined(CONFIG_FB_BF537_LQ035_MODULE) &bfin_fb_device, #endif +#if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE) + &bfin_fb_adv7393_device, +#endif + #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) &bfin_uart_device, #endif @@ -622,6 +701,10 @@ static struct platform_device *stamp_devices[] __initdata = { &bfin_sport0_uart_device, &bfin_sport1_uart_device, #endif + +#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) + &bfin_pata_device, +#endif }; static int __init stamp_init(void) @@ -632,7 +715,18 @@ static int __init stamp_init(void) spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info)); #endif + +#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) + irq_desc[PATA_INT].status |= IRQ_NOAUTOEN; +#endif return 0; } arch_initcall(stamp_init); + +void native_machine_restart(char *cmd) +{ + /* workaround reboot hang when booting from SPI */ + if ((bfin_read_SYSCR() & 0x7) == 0x3) + bfin_gpio_reset_spi0_ssel1(); +} diff --git a/arch/blackfin/mach-bf548/boards/ezkit.c b/arch/blackfin/mach-bf548/boards/ezkit.c index 96ad95fab1a..2c47db494f7 100644 --- a/arch/blackfin/mach-bf548/boards/ezkit.c +++ b/arch/blackfin/mach-bf548/boards/ezkit.c @@ -35,9 +35,16 @@ #include #include #include -#include #include +#include #include +#include +#include +#include +#include +#include +#include +#include /* * Name the Board for the /proc/cpuinfo @@ -48,6 +55,88 @@ char *bfin_board_name = "ADSP-BF548-EZKIT"; * Driver needs to know address, irq and flag pin. */ +#if defined(CONFIG_FB_BF54X_LQ043) || defined(CONFIG_FB_BF54X_LQ043_MODULE) + +#include + +static struct bfin_bf54xfb_mach_info bf54x_lq043_data = { + .width = 480, + .height = 272, + .xres = {480, 480, 480}, + .yres = {272, 272, 272}, + .bpp = {24, 24, 24}, + .disp = GPIO_PE3, +}; + +static struct resource bf54x_lq043_resources[] = { + { + .start = IRQ_EPPI0_ERR, + .end = IRQ_EPPI0_ERR, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device bf54x_lq043_device = { + .name = "bf54x-lq043", + .id = -1, + .num_resources = ARRAY_SIZE(bf54x_lq043_resources), + .resource = bf54x_lq043_resources, + .dev = { + .platform_data = &bf54x_lq043_data, + }, +}; +#endif + +#if defined(CONFIG_KEYBOARD_BFIN) || defined(CONFIG_KEYBOARD_BFIN_MODULE) +static int bf548_keymap[] = { + KEYVAL(0, 0, KEY_ENTER), + KEYVAL(0, 1, KEY_HELP), + KEYVAL(0, 2, KEY_0), + KEYVAL(0, 3, KEY_BACKSPACE), + KEYVAL(1, 0, KEY_TAB), + KEYVAL(1, 1, KEY_9), + KEYVAL(1, 2, KEY_8), + KEYVAL(1, 3, KEY_7), + KEYVAL(2, 0, KEY_DOWN), + KEYVAL(2, 1, KEY_6), + KEYVAL(2, 2, KEY_5), + KEYVAL(2, 3, KEY_4), + KEYVAL(3, 0, KEY_UP), + KEYVAL(3, 1, KEY_3), + KEYVAL(3, 2, KEY_2), + KEYVAL(3, 3, KEY_1), +}; + +static struct bfin_kpad_platform_data bf54x_kpad_data = { + .rows = 4, + .cols = 4, + .keymap = bf548_keymap, + .keymapsize = ARRAY_SIZE(bf548_keymap), + .repeat = 0, + .debounce_time = 5000, /* ns (5ms) */ + .coldrive_time = 1000, /* ns (1ms) */ + .keyup_test_interval = 50, /* ms (50ms) */ +}; + +static struct resource bf54x_kpad_resources[] = { + { + .start = IRQ_KEY, + .end = IRQ_KEY, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device bf54x_kpad_device = { + .name = "bf54x-keys", + .id = -1, + .num_resources = ARRAY_SIZE(bf54x_kpad_resources), + .resource = bf54x_kpad_resources, + .dev = { + .platform_data = &bf54x_kpad_data, + }, +}; +#endif + #if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) static struct platform_device rtc_device = { .name = "rtc-bfin", @@ -94,6 +183,344 @@ static struct platform_device bfin_uart_device = { }; #endif +#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE) +static struct resource smsc911x_resources[] = { + { + .name = "smsc911x-memory", + .start = 0x24000000, + .end = 0x24000000 + 0xFF, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_PE8, + .end = IRQ_PE8, + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL, + }, +}; +static struct platform_device smsc911x_device = { + .name = "smsc911x", + .id = 0, + .num_resources = ARRAY_SIZE(smsc911x_resources), + .resource = smsc911x_resources, +}; +#endif + +#if defined(CONFIG_USB_BF54x_HCD) || defined(CONFIG_USB_BF54x_HCD_MODULE) +static struct resource bf54x_hcd_resources[] = { + { + .start = 0xFFC03C00, + .end = 0xFFC040FF, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device bf54x_hcd = { + .name = "bf54x-hcd", + .id = 0, + .num_resources = ARRAY_SIZE(bf54x_hcd_resources), + .resource = bf54x_hcd_resources, +}; +#endif + +#if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE) +static struct resource musb_resources[] = { + [0] = { + .start = 0xFFC03C00, + .end = 0xFFC040FF, + .flags = IORESOURCE_MEM, + }, + [1] = { /* general IRQ */ + .start = IRQ_USB_INT0, + .end = IRQ_USB_INT0, + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, + }, + [2] = { /* DMA IRQ */ + .start = IRQ_USB_DMA, + .end = IRQ_USB_DMA, + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, + }, +}; + +static struct musb_hdrc_platform_data musb_plat = { +#ifdef CONFIG_USB_MUSB_OTG + .mode = MUSB_OTG, +#elif CONFIG_USB_MUSB_HDRC_HCD + .mode = MUSB_HOST, +#elif CONFIG_USB_GADGET_MUSB_HDRC + .mode = MUSB_PERIPHERAL, +#endif + .multipoint = 1, +}; + +static u64 musb_dmamask = ~(u32)0; + +static struct platform_device musb_device = { + .name = "musb_hdrc", + .id = 0, + .dev = { + .dma_mask = &musb_dmamask, + .coherent_dma_mask = 0xffffffff, + .platform_data = &musb_plat, + }, + .num_resources = ARRAY_SIZE(musb_resources), + .resource = musb_resources, +}; +#endif + +#if defined(CONFIG_PATA_BF54X) || defined(CONFIG_PATA_BF54X_MODULE) +static struct resource bfin_atapi_resources[] = { + { + .start = 0xFFC03800, + .end = 0xFFC0386F, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_ATAPI_ERR, + .end = IRQ_ATAPI_ERR, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device bfin_atapi_device = { + .name = "pata-bf54x", + .id = -1, + .num_resources = ARRAY_SIZE(bfin_atapi_resources), + .resource = bfin_atapi_resources, +}; +#endif + +#if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE) +static struct mtd_partition partition_info[] = { + { + .name = "Linux Kernel", + .offset = 0, + .size = 4 * SIZE_1M, + }, + { + .name = "File System", + .offset = 4 * SIZE_1M, + .size = (256 - 4) * SIZE_1M, + }, +}; + +static struct bf5xx_nand_platform bf5xx_nand_platform = { + .page_size = NFC_PG_SIZE_256, + .data_width = NFC_NWIDTH_8, + .partitions = partition_info, + .nr_partitions = ARRAY_SIZE(partition_info), + .rd_dly = 3, + .wr_dly = 3, +}; + +static struct resource bf5xx_nand_resources[] = { + { + .start = 0xFFC03B00, + .end = 0xFFC03B4F, + .flags = IORESOURCE_MEM, + }, + { + .start = CH_NFC, + .end = CH_NFC, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device bf5xx_nand_device = { + .name = "bf5xx-nand", + .id = 0, + .num_resources = ARRAY_SIZE(bf5xx_nand_resources), + .resource = bf5xx_nand_resources, + .dev = { + .platform_data = &bf5xx_nand_platform, + }, +}; +#endif + +#if defined(CONFIG_SDH_BFIN) || defined(CONFIG_SDH_BFIN) +static struct platform_device bf54x_sdh_device = { + .name = "bfin-sdh", + .id = 0, +}; +#endif + +#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) +/* all SPI peripherals info goes here */ +#if defined(CONFIG_MTD_M25P80) \ + || defined(CONFIG_MTD_M25P80_MODULE) +/* SPI flash chip (m25p16) */ +static struct mtd_partition bfin_spi_flash_partitions[] = { + { + .name = "bootloader", + .size = 0x00040000, + .offset = 0, + .mask_flags = MTD_CAP_ROM + }, { + .name = "linux kernel", + .size = 0x1c0000, + .offset = 0x40000 + } +}; + +static struct flash_platform_data bfin_spi_flash_data = { + .name = "m25p80", + .parts = bfin_spi_flash_partitions, + .nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions), + .type = "m25p16", +}; + +static struct bfin5xx_spi_chip spi_flash_chip_info = { + .enable_dma = 0, /* use dma transfer with this chip*/ + .bits_per_word = 8, + .cs_change_per_word = 0, +}; +#endif + +#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE) +static struct bfin5xx_spi_chip spi_ad7877_chip_info = { + .cs_change_per_word = 1, + .enable_dma = 0, + .bits_per_word = 16, +}; + +static const struct ad7877_platform_data bfin_ad7877_ts_info = { + .model = 7877, + .vref_delay_usecs = 50, /* internal, no capacitor */ + .x_plate_ohms = 419, + .y_plate_ohms = 486, + .pressure_max = 1000, + .pressure_min = 0, + .stopacq_polarity = 1, + .first_conversion_delay = 3, + .acquisition_time = 1, + .averaging = 1, + .pen_down_acc_interval = 1, +}; +#endif + +static struct spi_board_info bf54x_spi_board_info[] __initdata = { +#if defined(CONFIG_MTD_M25P80) \ + || defined(CONFIG_MTD_M25P80_MODULE) + { + /* the modalias must be the same as spi device driver name */ + .modalias = "m25p80", /* Name of spi_driver for this device */ + .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 0, /* Framework bus number */ + .chip_select = 1, /* SPI_SSEL1*/ + .platform_data = &bfin_spi_flash_data, + .controller_data = &spi_flash_chip_info, + .mode = SPI_MODE_3, + }, +#endif +#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE) +{ + .modalias = "ad7877", + .platform_data = &bfin_ad7877_ts_info, + .irq = IRQ_PJ11, + .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 0, + .chip_select = 2, + .controller_data = &spi_ad7877_chip_info, +}, +#endif +}; + +/* SPI (0) */ +static struct resource bfin_spi0_resource[] = { + [0] = { + .start = SPI0_REGBASE, + .end = SPI0_REGBASE + 0xFF, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = CH_SPI0, + .end = CH_SPI0, + .flags = IORESOURCE_IRQ, + } +}; + +/* SPI (1) */ +static struct resource bfin_spi1_resource[] = { + [0] = { + .start = SPI1_REGBASE, + .end = SPI1_REGBASE + 0xFF, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = CH_SPI1, + .end = CH_SPI1, + .flags = IORESOURCE_IRQ, + } +}; + +/* SPI controller data */ +static struct bfin5xx_spi_master bf54x_spi_master_info = { + .num_chipselect = 8, + .enable_dma = 1, /* master has the ability to do dma transfer */ +}; + +static struct platform_device bf54x_spi_master0 = { + .name = "bfin-spi", + .id = 0, /* Bus number */ + .num_resources = ARRAY_SIZE(bfin_spi0_resource), + .resource = bfin_spi0_resource, + .dev = { + .platform_data = &bf54x_spi_master_info, /* Passed to driver */ + }, +}; + +static struct platform_device bf54x_spi_master1 = { + .name = "bfin-spi", + .id = 1, /* Bus number */ + .num_resources = ARRAY_SIZE(bfin_spi1_resource), + .resource = bfin_spi1_resource, + .dev = { + .platform_data = &bf54x_spi_master_info, /* Passed to driver */ + }, +}; +#endif /* spi master and devices */ + +#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) +static struct resource bfin_twi0_resource[] = { + [0] = { + .start = TWI0_REGBASE, + .end = TWI0_REGBASE + 0xFF, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_TWI0, + .end = IRQ_TWI0, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device i2c_bfin_twi0_device = { + .name = "i2c-bfin-twi", + .id = 0, + .num_resources = ARRAY_SIZE(bfin_twi0_resource), + .resource = bfin_twi0_resource, +}; + +static struct resource bfin_twi1_resource[] = { + [0] = { + .start = TWI1_REGBASE, + .end = TWI1_REGBASE + 0xFF, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_TWI1, + .end = IRQ_TWI1, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device i2c_bfin_twi1_device = { + .name = "i2c-bfin-twi", + .id = 1, + .num_resources = ARRAY_SIZE(bfin_twi1_resource), + .resource = bfin_twi1_resource, +}; +#endif + static struct platform_device *ezkit_devices[] __initdata = { #if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) &rtc_device, @@ -102,12 +529,60 @@ static struct platform_device *ezkit_devices[] __initdata = { #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) &bfin_uart_device, #endif + +#if defined(CONFIG_FB_BF54X_LQ043) || defined(CONFIG_FB_BF54X_LQ043_MODULE) + &bf54x_lq043_device, +#endif + +#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE) + &smsc911x_device, +#endif + +#if defined(CONFIG_USB_BF54x_HCD) || defined(CONFIG_USB_BF54x_HCD_MODULE) + &bf54x_hcd, +#endif + +#if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE) + &musb_device, +#endif + +#if defined(CONFIG_PATA_BF54X) || defined(CONFIG_PATA_BF54X_MODULE) + &bfin_atapi_device, +#endif + +#if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE) + &bf5xx_nand_device, +#endif + +#if defined(CONFIG_SDH_BFIN) || defined(CONFIG_SDH_BFIN) + &bf54x_sdh_device, +#endif + +#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) + &bf54x_spi_master0, +/* &bf54x_spi_master1,*/ +#endif + +#if defined(CONFIG_KEYBOARD_BFIN) || defined(CONFIG_KEYBOARD_BFIN_MODULE) + &bf54x_kpad_device, +#endif + +#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) + &i2c_bfin_twi0_device, + &i2c_bfin_twi1_device, +#endif }; static int __init stamp_init(void) { printk(KERN_INFO "%s(): registering device resources\n", __FUNCTION__); platform_add_devices(ezkit_devices, ARRAY_SIZE(ezkit_devices)); + +#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) + spi_register_board_info(bf54x_spi_board_info, + ARRAY_SIZE(bf54x_spi_board_info)); +#endif + return 0; } diff --git a/arch/blackfin/mach-bf561/boards/cm_bf561.c b/arch/blackfin/mach-bf561/boards/cm_bf561.c index 5b2b544529a..cd827a1b6ba 100644 --- a/arch/blackfin/mach-bf561/boards/cm_bf561.c +++ b/arch/blackfin/mach-bf561/boards/cm_bf561.c @@ -34,7 +34,9 @@ #include #include #include +#include #include +#include #include /* @@ -112,7 +114,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { /* the modalias must be the same as spi device driver name */ .modalias = "m25p80", /* Name of spi_driver for this device */ .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 1, /* Framework bus number */ + .bus_num = 0, /* Framework bus number */ .chip_select = 1, /* Framework chip select. On STAMP537 it is SPISSEL1*/ .platform_data = &bfin_spi_flash_data, .controller_data = &spi_flash_chip_info, @@ -124,7 +126,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { { .modalias = "bfin_spi_adc", /* Name of spi_driver for this device */ .max_speed_hz = 6250000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 1, /* Framework bus number */ + .bus_num = 0, /* Framework bus number */ .chip_select = 1, /* Framework chip select. */ .platform_data = NULL, /* No spi_driver specific config */ .controller_data = &spi_adc_chip_info, @@ -135,7 +137,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { { .modalias = "ad1836-spi", .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 1, + .bus_num = 0, .chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT, .controller_data = &ad1836_spi_chip_info, }, @@ -144,7 +146,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { { .modalias = "ad9960-spi", .max_speed_hz = 10000000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 1, + .bus_num = 0, .chip_select = 1, .controller_data = &ad9960_spi_chip_info, }, @@ -153,7 +155,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { { .modalias = "spi_mmc", .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 1, + .bus_num = 0, .chip_select = CONFIG_SPI_MMC_CS_CHAN, .platform_data = NULL, .controller_data = &spi_mmc_chip_info, @@ -162,17 +164,33 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { #endif }; +/* SPI (0) */ +static struct resource bfin_spi0_resource[] = { + [0] = { + .start = SPI0_REGBASE, + .end = SPI0_REGBASE + 0xFF, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = CH_SPI, + .end = CH_SPI, + .flags = IORESOURCE_IRQ, + } +}; + /* SPI controller data */ -static struct bfin5xx_spi_master spi_bfin_master_info = { +static struct bfin5xx_spi_master bfin_spi0_info = { .num_chipselect = 8, .enable_dma = 1, /* master has the ability to do dma transfer */ }; -static struct platform_device spi_bfin_master_device = { - .name = "bfin-spi-master", - .id = 1, /* Bus number */ +static struct platform_device bfin_spi0_device = { + .name = "bfin-spi", + .id = 0, /* Bus number */ + .num_resources = ARRAY_SIZE(bfin_spi0_resource), + .resource = bfin_spi0_resource, .dev = { - .platform_data = &spi_bfin_master_info, /* Passed to driver */ + .platform_data = &bfin_spi0_info, /* Passed to driver */ }, }; #endif /* spi master and devices */ @@ -256,6 +274,43 @@ static struct platform_device bfin_uart_device = { }; #endif +#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) +#define PATA_INT 119 + +static struct pata_platform_info bfin_pata_platform_data = { + .ioport_shift = 2, + .irq_type = IRQF_TRIGGER_HIGH | IRQF_DISABLED, +}; + +static struct resource bfin_pata_resources[] = { + { + .start = 0x2400C000, + .end = 0x2400C001F, + .flags = IORESOURCE_MEM, + }, + { + .start = 0x2400D018, + .end = 0x2400D01B, + .flags = IORESOURCE_MEM, + }, + { + .start = PATA_INT, + .end = PATA_INT, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device bfin_pata_device = { + .name = "pata_platform", + .id = -1, + .num_resources = ARRAY_SIZE(bfin_pata_resources), + .resource = bfin_pata_resources, + .dev = { + .platform_data = &bfin_pata_platform_data, + } +}; +#endif + static struct platform_device *cm_bf561_devices[] __initdata = { #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) @@ -271,9 +326,12 @@ static struct platform_device *cm_bf561_devices[] __initdata = { #endif #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) - &spi_bfin_master_device, + &bfin_spi0_device, #endif +#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) + &bfin_pata_device, +#endif }; static int __init cm_bf561_init(void) @@ -283,6 +341,10 @@ static int __init cm_bf561_init(void) #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info)); #endif + +#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) + irq_desc[PATA_INT].status |= IRQ_NOAUTOEN; +#endif return 0; } diff --git a/arch/blackfin/mach-bf561/boards/ezkit.c b/arch/blackfin/mach-bf561/boards/ezkit.c index 724191da20a..57e14edca8b 100644 --- a/arch/blackfin/mach-bf561/boards/ezkit.c +++ b/arch/blackfin/mach-bf561/boards/ezkit.c @@ -32,6 +32,8 @@ #include #include #include +#include +#include #include /* @@ -140,17 +142,33 @@ static struct bfin5xx_spi_chip ad1836_spi_chip_info = { #endif #endif +/* SPI (0) */ +static struct resource bfin_spi0_resource[] = { + [0] = { + .start = SPI0_REGBASE, + .end = SPI0_REGBASE + 0xFF, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = CH_SPI, + .end = CH_SPI, + .flags = IORESOURCE_IRQ, + } +}; + /* SPI controller data */ -static struct bfin5xx_spi_master spi_bfin_master_info = { +static struct bfin5xx_spi_master bfin_spi0_info = { .num_chipselect = 8, .enable_dma = 1, /* master has the ability to do dma transfer */ }; -static struct platform_device spi_bfin_master_device = { - .name = "bfin-spi-master", - .id = 1, /* Bus number */ +static struct platform_device bfin_spi0_device = { + .name = "bfin-spi", + .id = 0, /* Bus number */ + .num_resources = ARRAY_SIZE(bfin_spi0_resource), + .resource = bfin_spi0_resource, .dev = { - .platform_data = &spi_bfin_master_info, /* Passed to driver */ + .platform_data = &bfin_spi0_info, /* Passed to driver */ }, }; @@ -160,23 +178,63 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { { .modalias = "ad1836-spi", .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 1, + .bus_num = 0, .chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT, .controller_data = &ad1836_spi_chip_info, }, #endif }; +#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) +#define PATA_INT 55 + +static struct pata_platform_info bfin_pata_platform_data = { + .ioport_shift = 1, + .irq_type = IRQF_TRIGGER_HIGH | IRQF_DISABLED, +}; + +static struct resource bfin_pata_resources[] = { + { + .start = 0x20314020, + .end = 0x2031403F, + .flags = IORESOURCE_MEM, + }, + { + .start = 0x2031401C, + .end = 0x2031401F, + .flags = IORESOURCE_MEM, + }, + { + .start = PATA_INT, + .end = PATA_INT, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device bfin_pata_device = { + .name = "pata_platform", + .id = -1, + .num_resources = ARRAY_SIZE(bfin_pata_resources), + .resource = bfin_pata_resources, + .dev = { + .platform_data = &bfin_pata_platform_data, + } +}; +#endif + static struct platform_device *ezkit_devices[] __initdata = { #if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) &smc91x_device, #endif #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) - &spi_bfin_master_device, + &bfin_spi0_device, #endif #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) &bfin_uart_device, #endif +#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) + &bfin_pata_device, +#endif }; static int __init ezkit_init(void) @@ -194,7 +252,15 @@ static int __init ezkit_init(void) SSYNC(); #endif - return spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info)); +#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) + spi_register_board_info(bfin_spi_board_info, + ARRAY_SIZE(bfin_spi_board_info)); +#endif + +#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) + irq_desc[PATA_INT].status |= IRQ_NOAUTOEN; +#endif + return 0; } arch_initcall(ezkit_init); -- cgit v1.2.3-70-g09d2 From 1aafd9091226a02b481298315f959f777294684e Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Wed, 25 Jul 2007 11:19:14 +0800 Subject: Blackfin arch: revise anomaly handling by basing things on the compiler not the kconfig defines revise anomaly handling by basing things on the compiler not the kconfig defines, so the header is stable and usable outside of the kernel. This also allows us to move some code from preprocessing to compiling (gcc culls dead code) which should help with code quality (readability, catch minor bugs, etc...). Signed-off-by: Mike Frysinger Signed-off-by: Bryan Wu --- arch/blackfin/kernel/bfin_gpio.c | 10 +- arch/blackfin/kernel/cplbinit.c | 4 +- arch/blackfin/kernel/setup.c | 20 +- arch/blackfin/lib/memcmp.S | 2 +- arch/blackfin/lib/memcpy.S | 2 +- arch/blackfin/lib/memmove.S | 4 +- arch/blackfin/mach-bf533/head.S | 10 +- arch/blackfin/mach-bf537/head.S | 18 +- arch/blackfin/mach-bf548/head.S | 2 +- arch/blackfin/mach-bf561/head.S | 11 +- arch/blackfin/mach-common/cacheinit.S | 2 +- arch/blackfin/mach-common/cplbmgr.S | 2 +- arch/blackfin/mach-common/entry.S | 10 +- arch/blackfin/mach-common/interrupt.S | 6 +- include/asm-blackfin/blackfin.h | 118 +++--- include/asm-blackfin/mach-bf533/anomaly.h | 437 +++++++++++---------- include/asm-blackfin/mach-bf533/bf533.h | 2 +- include/asm-blackfin/mach-bf537/anomaly.h | 216 +++++----- include/asm-blackfin/mach-bf537/bf537.h | 2 +- include/asm-blackfin/mach-bf548/anomaly.h | 94 +++-- include/asm-blackfin/mach-bf561/anomaly.h | 378 +++++++++++------- include/asm-blackfin/mach-bf561/bf561.h | 2 +- include/asm-blackfin/mach-common/cdef_LPBlackfin.h | 4 +- include/asm-blackfin/mach-common/def_LPBlackfin.h | 132 +++---- include/asm-blackfin/system.h | 93 +++-- 25 files changed, 875 insertions(+), 706 deletions(-) (limited to 'arch') diff --git a/arch/blackfin/kernel/bfin_gpio.c b/arch/blackfin/kernel/bfin_gpio.c index 5d488ef965c..b818a8da121 100644 --- a/arch/blackfin/kernel/bfin_gpio.c +++ b/arch/blackfin/kernel/bfin_gpio.c @@ -330,7 +330,7 @@ EXPORT_SYMBOL(set_gpio_ ## name); SET_GPIO_SC(maska) SET_GPIO_SC(maskb) -#if defined(ANOMALY_05000311) +#if ANOMALY_05000311 void set_gpio_data(unsigned short gpio, unsigned short arg) { unsigned long flags; @@ -349,7 +349,7 @@ SET_GPIO_SC(data) #endif -#if defined(ANOMALY_05000311) +#if ANOMALY_05000311 void set_gpio_toggle(unsigned short gpio) { unsigned long flags; @@ -387,7 +387,7 @@ SET_GPIO_P(maska) SET_GPIO_P(maskb) -#if defined(ANOMALY_05000311) +#if ANOMALY_05000311 void set_gpiop_data(unsigned short gpio, unsigned short arg) { unsigned long flags; @@ -421,7 +421,7 @@ GET_GPIO(maska) GET_GPIO(maskb) -#if defined(ANOMALY_05000311) +#if ANOMALY_05000311 unsigned short get_gpio_data(unsigned short gpio) { unsigned long flags; @@ -455,7 +455,7 @@ GET_GPIO_P(both) GET_GPIO_P(maska) GET_GPIO_P(maskb) -#if defined(ANOMALY_05000311) +#if ANOMALY_05000311 unsigned short get_gpiop_data(unsigned short gpio) { unsigned long flags; diff --git a/arch/blackfin/kernel/cplbinit.c b/arch/blackfin/kernel/cplbinit.c index bbdb403fcb5..3b1c87c9fd5 100644 --- a/arch/blackfin/kernel/cplbinit.c +++ b/arch/blackfin/kernel/cplbinit.c @@ -230,8 +230,8 @@ static void __fill_code_cplbtab(struct cplb_tab *t, int i, u32 a_start, u32 a_en cplb_data[i].psize, cplb_data[i].i_conf); } else { -#if (defined(CONFIG_BLKFIN_CACHE) && defined(ANOMALY_05000263)) - if (i == SDRAM_KERN) { +#if defined(CONFIG_BLKFIN_CACHE) + if (ANOMALY_05000263 && i == SDRAM_KERN) { fill_cplbtab(t, cplb_data[i].start, cplb_data[i].end, diff --git a/arch/blackfin/kernel/setup.c b/arch/blackfin/kernel/setup.c index 88f221b89b3..02c15272f8e 100644 --- a/arch/blackfin/kernel/setup.c +++ b/arch/blackfin/kernel/setup.c @@ -179,14 +179,16 @@ void __init setup_arch(char **cmdline_p) cclk = get_cclk(); sclk = get_sclk(); -#if !defined(CONFIG_BFIN_KERNEL_CLOCK) && defined(ANOMALY_05000273) - if (cclk == sclk) +#if !defined(CONFIG_BFIN_KERNEL_CLOCK) + if (ANOMALY_05000273 && cclk == sclk) panic("ANOMALY 05000273, SCLK can not be same as CCLK"); #endif -#if defined(ANOMALY_05000266) - bfin_read_IMDMA_D0_IRQ_STATUS(); - bfin_read_IMDMA_D1_IRQ_STATUS(); +#ifdef BF561_FAMILY + if (ANOMALY_05000266) { + bfin_read_IMDMA_D0_IRQ_STATUS(); + bfin_read_IMDMA_D1_IRQ_STATUS(); + } #endif #ifdef DEBUG_SERIAL_EARLY_INIT @@ -260,7 +262,7 @@ void __init setup_arch(char **cmdline_p) && ((unsigned long *)mtd_phys)[1] == ROMSB_WORD1) mtd_size = PAGE_ALIGN(be32_to_cpu(((unsigned long *)mtd_phys)[2])); -# if (defined(CONFIG_BLKFIN_CACHE) && defined(ANOMALY_05000263)) +# if (defined(CONFIG_BLKFIN_CACHE) && ANOMALY_05000263) /* Due to a Hardware Anomaly we need to limit the size of usable * instruction memory to max 60MB, 56 if HUNT_FOR_ZERO is on * 05000263 - Hardware loop corrupted when taking an ICPLB exception @@ -289,7 +291,7 @@ void __init setup_arch(char **cmdline_p) _ebss = memory_mtd_start; /* define _ebss for compatible */ #endif /* CONFIG_MTD_UCLINUX */ -#if (defined(CONFIG_BLKFIN_CACHE) && defined(ANOMALY_05000263)) +#if (defined(CONFIG_BLKFIN_CACHE) && ANOMALY_05000263) /* Due to a Hardware Anomaly we need to limit the size of usable * instruction memory to max 60MB, 56 if HUNT_FOR_ZERO is on * 05000263 - Hardware loop corrupted when taking an ICPLB exception @@ -337,10 +339,8 @@ void __init setup_arch(char **cmdline_p) printk(KERN_INFO "Processor Speed: %lu MHz core clock and %lu Mhz System Clock\n", cclk / 1000000, sclk / 1000000); -#if defined(ANOMALY_05000273) - if ((cclk >> 1) <= sclk) + if (ANOMALY_05000273 && (cclk >> 1) <= sclk) printk("\n\n\nANOMALY_05000273: CCLK must be >= 2*SCLK !!!\n\n\n"); -#endif printk(KERN_INFO "Board Memory: %ldMB\n", physical_mem_end >> 20); printk(KERN_INFO "Kernel Managed Memory: %ldMB\n", _ramend >> 20); diff --git a/arch/blackfin/lib/memcmp.S b/arch/blackfin/lib/memcmp.S index b88c5d2d1eb..219fa2877c6 100644 --- a/arch/blackfin/lib/memcmp.S +++ b/arch/blackfin/lib/memcmp.S @@ -61,7 +61,7 @@ ENTRY(_memcmp) LSETUP (.Lquad_loop_s, .Lquad_loop_e) LC0=P1; .Lquad_loop_s: -#ifdef ANOMALY_05000202 +#if ANOMALY_05000202 R0 = [P0++]; R1 = [I0++]; #else diff --git a/arch/blackfin/lib/memcpy.S b/arch/blackfin/lib/memcpy.S index 14a5585bbd0..2e6336492b4 100644 --- a/arch/blackfin/lib/memcpy.S +++ b/arch/blackfin/lib/memcpy.S @@ -98,7 +98,7 @@ ENTRY(_memcpy) R0 = R1; I1 = P1; R3 = [I1++]; -#ifdef ANOMALY_05000202 +#if ANOMALY_05000202 .Lword_loops: [P0++] = R3; .Lword_loope: diff --git a/arch/blackfin/lib/memmove.S b/arch/blackfin/lib/memmove.S index 6ee6e206e77..33f8653145b 100644 --- a/arch/blackfin/lib/memmove.S +++ b/arch/blackfin/lib/memmove.S @@ -70,7 +70,7 @@ ENTRY(_memmove) R1 = [I0++]; LSETUP (.Lquad_loops, .Lquad_loope) LC0=P1; -#ifdef ANOMALY_05000202 +#if ANOMALY_05000202 .Lquad_loops: [P0++] = R1; .Lquad_loope: @@ -102,7 +102,7 @@ ENTRY(_memmove) R1 = B[P3--] (Z); CC = P2 == 0; IF CC JUMP .Lno_loop; -#ifdef ANOMALY_05000245 +#if ANOMALY_05000245 NOP; NOP; #endif diff --git a/arch/blackfin/mach-bf533/head.S b/arch/blackfin/mach-bf533/head.S index 7dd0e9c3a93..5aeffd06fe7 100644 --- a/arch/blackfin/mach-bf533/head.S +++ b/arch/blackfin/mach-bf533/head.S @@ -151,13 +151,13 @@ ENTRY(__start) R0 = R0 & R1; /* Anomaly 05000125 */ -#ifdef ANOMALY_05000125 +#if ANOMALY_05000125 CLI R2; SSYNC; #endif [p0] = R0; SSYNC; -#ifdef ANOMALY_05000125 +#if ANOMALY_05000125 STI R2; #endif @@ -169,13 +169,13 @@ ENTRY(__start) R0 = R0 & R1; /* Anomaly 05000125 */ -#ifdef ANOMALY_05000125 +#if ANOMALY_05000125 CLI R2; SSYNC; #endif [p0] = R0; SSYNC; -#ifdef ANOMALY_05000125 +#if ANOMALY_05000125 STI R2; #endif @@ -264,7 +264,7 @@ ENTRY(__start) p0.l = .LWAIT_HERE; p0.h = .LWAIT_HERE; reti = p0; -#if defined(ANOMALY_05000281) +#if ANOMALY_05000281 nop; nop; nop; #endif rti; diff --git a/arch/blackfin/mach-bf537/head.S b/arch/blackfin/mach-bf537/head.S index 429c8a1019d..d9b411adf6a 100644 --- a/arch/blackfin/mach-bf537/head.S +++ b/arch/blackfin/mach-bf537/head.S @@ -107,13 +107,13 @@ ENTRY(__start) R0 = R0 & R1; /* Anomaly 05000125 */ -#ifdef ANOMALY_05000125 +#if ANOMALY_05000125 CLI R2; SSYNC; #endif [p0] = R0; SSYNC; -#ifdef ANOMALY_05000125 +#if ANOMALY_05000125 STI R2; #endif @@ -125,13 +125,13 @@ ENTRY(__start) R0 = R0 & R1; /* Anomaly 05000125 */ -#ifdef ANOMALY_05000125 +#if ANOMALY_05000125 CLI R2; SSYNC; #endif [p0] = R0; SSYNC; -#ifdef ANOMALY_05000125 +#if ANOMALY_05000125 STI R2; #endif @@ -141,12 +141,12 @@ ENTRY(__start) */ p0.h = hi(BFIN_PORT_MUX); p0.l = lo(BFIN_PORT_MUX); -#ifdef ANOMALY_05000212 +#if ANOMALY_05000212 R0.L = W[P0]; /* Read */ SSYNC; #endif R0 = (PGDE_UART | PFTE_UART)(Z); -#ifdef ANOMALY_05000212 +#if ANOMALY_05000212 W[P0] = R0.L; /* Write */ SSYNC; #endif @@ -155,12 +155,12 @@ ENTRY(__start) p0.h = hi(PORTF_FER); p0.l = lo(PORTF_FER); -#ifdef ANOMALY_05000212 +#if ANOMALY_05000212 R0.L = W[P0]; /* Read */ SSYNC; #endif R0 = 0x000F(Z); -#ifdef ANOMALY_05000212 +#if ANOMALY_05000212 W[P0] = R0.L; /* Write */ SSYNC; #endif @@ -274,7 +274,7 @@ ENTRY(__start) p0.l = .LWAIT_HERE; p0.h = .LWAIT_HERE; reti = p0; -#if defined(ANOMALY_05000281) +#if ANOMALY_05000281 nop; nop; nop; #endif rti; diff --git a/arch/blackfin/mach-bf548/head.S b/arch/blackfin/mach-bf548/head.S index 06751ae8b85..e5e56df3bf4 100644 --- a/arch/blackfin/mach-bf548/head.S +++ b/arch/blackfin/mach-bf548/head.S @@ -172,7 +172,7 @@ ENTRY(__stext) p0.l = .LWAIT_HERE; p0.h = .LWAIT_HERE; reti = p0; -#if defined (ANOMALY_05000281) +#if ANOMALY_05000281 nop; nop; nop; diff --git a/arch/blackfin/mach-bf561/head.S b/arch/blackfin/mach-bf561/head.S index 38650a62898..b1d0e54a97a 100644 --- a/arch/blackfin/mach-bf561/head.S +++ b/arch/blackfin/mach-bf561/head.S @@ -106,14 +106,13 @@ ENTRY(__start) R0 = ~ENICPLB; R0 = R0 & R1; - /* Anomaly 05000125 */ -#ifdef ANOMALY_05000125 +#if ANOMALY_05000125 CLI R2; SSYNC; #endif [p0] = R0; SSYNC; -#ifdef ANOMALY_05000125 +#if ANOMALY_05000125 STI R2; #endif @@ -125,13 +124,13 @@ ENTRY(__start) R0 = R0 & R1; /* Anomaly 05000125 */ -#ifdef ANOMALY_05000125 +#if ANOMALY_05000125 CLI R2; SSYNC; #endif [p0] = R0; SSYNC; -#ifdef ANOMALY_05000125 +#if ANOMALY_05000125 STI R2; #endif @@ -220,7 +219,7 @@ ENTRY(__start) p0.l = .LWAIT_HERE; p0.h = .LWAIT_HERE; reti = p0; -#if defined(ANOMALY_05000281) +#if ANOMALY_05000281 nop; nop; nop; #endif rti; diff --git a/arch/blackfin/mach-common/cacheinit.S b/arch/blackfin/mach-common/cacheinit.S index 5be6b975ae4..05c0c77510b 100644 --- a/arch/blackfin/mach-common/cacheinit.S +++ b/arch/blackfin/mach-common/cacheinit.S @@ -38,7 +38,7 @@ .text -#ifdef ANOMALY_05000125 +#if ANOMALY_05000125 #if defined(CONFIG_BLKFIN_CACHE) ENTRY(_bfin_write_IMEM_CONTROL) diff --git a/arch/blackfin/mach-common/cplbmgr.S b/arch/blackfin/mach-common/cplbmgr.S index e4b47e09cf1..6c256baf087 100644 --- a/arch/blackfin/mach-common/cplbmgr.S +++ b/arch/blackfin/mach-common/cplbmgr.S @@ -405,7 +405,7 @@ ENTRY(_cplb_mgr) P3.L = _page_size_table; /* retrieve end address */ P3.H = _page_size_table; /* retrieve end address */ R3 = 0x1002; /* 16th - position, 2 bits -length */ -#ifdef ANOMALY_05000209 +#if ANOMALY_05000209 nop; /* Anomaly 05000209 */ #endif R7 = EXTRACT(R1,R3.l); diff --git a/arch/blackfin/mach-common/entry.S b/arch/blackfin/mach-common/entry.S index 96045880834..207e69786b4 100644 --- a/arch/blackfin/mach-common/entry.S +++ b/arch/blackfin/mach-common/entry.S @@ -69,7 +69,7 @@ * patch up CPLB misses on the kernel stack. */ ENTRY(_ex_dcplb) -#if defined(ANOMALY_05000261) +#if ANOMALY_05000261 /* * Work around an anomaly: if we see a new DCPLB fault, return * without doing anything. Then, if we get the same fault again, @@ -137,7 +137,7 @@ ENTRY(_ex_single_step) _return_from_exception: DEBUG_START_HWTRACE(p5, r7) -#ifdef ANOMALY_05000257 +#if ANOMALY_05000257 R7=LC0; LC0=R7; R7=LC1; @@ -634,7 +634,7 @@ ENTRY(_return_from_int) p1.h = _schedule_and_signal_from_int; [p0] = p1; csync; -#if defined(ANOMALY_05000281) +#if ANOMALY_05000281 r0.l = lo(CONFIG_BOOT_LOAD); r0.h = hi(CONFIG_BOOT_LOAD); reti = r0; @@ -648,7 +648,7 @@ ENTRY(_return_from_int) ENDPROC(_return_from_int) ENTRY(_lower_to_irq14) -#if defined(ANOMALY_05000281) +#if ANOMALY_05000281 r0.l = lo(CONFIG_BOOT_LOAD); r0.h = hi(CONFIG_BOOT_LOAD); reti = r0; @@ -1184,7 +1184,7 @@ _exception_stack: .endr _exception_stack_top: -#if defined(ANOMALY_05000261) +#if ANOMALY_05000261 /* Used by the assembly entry point to work around an anomaly. */ _last_cplb_fault_retx: .long 0; diff --git a/arch/blackfin/mach-common/interrupt.S b/arch/blackfin/mach-common/interrupt.S index 203e2070916..14ef800a564 100644 --- a/arch/blackfin/mach-common/interrupt.S +++ b/arch/blackfin/mach-common/interrupt.S @@ -140,7 +140,7 @@ __common_int_entry: fp = 0; #endif -#if defined (ANOMALY_05000283) || defined (ANOMALY_05000315) +#if ANOMALY_05000283 || ANOMALY_05000315 cc = r7 == r7; p5.h = 0xffc0; p5.l = 0x0014; @@ -163,7 +163,7 @@ ENTRY(_evt_ivhw) #ifdef CONFIG_FRAME_POINTER fp = 0; #endif -#ifdef ANOMALY_05000283 +#if ANOMALY_05000283 cc = r7 == r7; p5.h = 0xffc0; p5.l = 0x0014; @@ -207,7 +207,7 @@ ENTRY(_evt_evt2) #ifdef CONFIG_FRAME_POINTER fp = 0; #endif -#ifdef ANOMALY_05000283 +#if ANOMALY_05000283 cc = r7 == r7; p5.h = 0xffc0; p5.l = 0x0014; diff --git a/include/asm-blackfin/blackfin.h b/include/asm-blackfin/blackfin.h index 25b934b7f82..1b2dd5a3fe7 100644 --- a/include/asm-blackfin/blackfin.h +++ b/include/asm-blackfin/blackfin.h @@ -17,72 +17,66 @@ #ifndef __ASSEMBLY__ /* SSYNC implementation for C file */ -#if defined(ANOMALY_05000312) && defined(ANOMALY_05000244) -static inline void SSYNC (void) +static inline void SSYNC(void) { int _tmp; - __asm__ __volatile__ ("cli %0;\n\t" - "nop;nop;\n\t" - "ssync;\n\t" - "sti %0;\n\t" - :"=d"(_tmp):); + if (ANOMALY_05000312 && ANOMALY_05000244) + __asm__ __volatile__( + "cli %0;" + "nop;" + "nop;" + "ssync;" + "sti %0;" + : "=d" (_tmp) + ); + else if (ANOMALY_05000312 && !ANOMALY_05000244) + __asm__ __volatile__( + "cli %0;" + "ssync;" + "sti %0;" + : "=d" (_tmp) + ); + else if (!ANOMALY_05000312 && ANOMALY_05000244) + __asm__ __volatile__( + "nop;" + "nop;" + "nop;" + "ssync;" + ); + else + __asm__ __volatile__("ssync;"); } -#elif defined(ANOMALY_05000312) && !defined(ANOMALY_05000244) -static inline void SSYNC (void) -{ - int _tmp; - __asm__ __volatile__ ("cli %0;\n\t" - "ssync;\n\t" - "sti %0;\n\t" - :"=d"(_tmp):); -} -#elif !defined(ANOMALY_05000312) && defined(ANOMALY_05000244) -static inline void SSYNC (void) -{ - __asm__ __volatile__ ("nop; nop; nop;\n\t" - "ssync;\n\t" - ::); -} -#elif !defined(ANOMALY_05000312) && !defined(ANOMALY_05000244) -static inline void SSYNC (void) -{ - __asm__ __volatile__ ("ssync;\n\t"); -} -#endif /* CSYNC implementation for C file */ -#if defined(ANOMALY_05000312) && defined(ANOMALY_05000244) -static inline void CSYNC (void) +static inline void CSYNC(void) { int _tmp; - __asm__ __volatile__ ("cli %0;\n\t" - "nop;nop;\n\t" - "csync;\n\t" - "sti %0;\n\t" - :"=d"(_tmp):); -} -#elif defined(ANOMALY_05000312) && !defined(ANOMALY_05000244) -static inline void CSYNC (void) -{ - int _tmp; - __asm__ __volatile__ ("cli %0;\n\t" - "csync;\n\t" - "sti %0;\n\t" - :"=d"(_tmp):); -} -#elif !defined(ANOMALY_05000312) && defined(ANOMALY_05000244) -static inline void CSYNC (void) -{ - __asm__ __volatile__ ("nop; nop; nop;\n\t" - "ssync;\n\t" - ::); -} -#elif !defined(ANOMALY_05000312) && !defined(ANOMALY_05000244) -static inline void CSYNC (void) -{ - __asm__ __volatile__ ("csync;\n\t"); + if (ANOMALY_05000312 && ANOMALY_05000244) + __asm__ __volatile__( + "cli %0;" + "nop;" + "nop;" + "csync;" + "sti %0;" + : "=d" (_tmp) + ); + else if (ANOMALY_05000312 && !ANOMALY_05000244) + __asm__ __volatile__( + "cli %0;" + "csync;" + "sti %0;" + : "=d" (_tmp) + ); + else if (!ANOMALY_05000312 && ANOMALY_05000244) + __asm__ __volatile__( + "nop;" + "nop;" + "nop;" + "ssync;" + ); + else + __asm__ __volatile__("csync;"); } -#endif #else /* __ASSEMBLY__ */ @@ -91,19 +85,19 @@ static inline void CSYNC (void) #define ssync(x) SSYNC(x) #define csync(x) CSYNC(x) -#if defined(ANOMALY_05000312) && defined(ANOMALY_05000244) +#if ANOMALY_05000312 && ANOMALY_05000244 #define SSYNC(scratch) cli scratch; nop; nop; SSYNC; sti scratch; #define CSYNC(scratch) cli scratch; nop; nop; CSYNC; sti scratch; -#elif defined(ANOMALY_05000312) && !defined(ANOMALY_05000244) +#elif ANOMALY_05000312 && !ANOMALY_05000244 #define SSYNC(scratch) cli scratch; nop; nop; SSYNC; sti scratch; #define CSYNC(scratch) cli scratch; nop; nop; CSYNC; sti scratch; -#elif !defined(ANOMALY_05000312) && defined(ANOMALY_05000244) +#elif !ANOMALY_05000312 && ANOMALY_05000244 #define SSYNC(scratch) nop; nop; nop; SSYNC; #define CSYNC(scratch) nop; nop; nop; CSYNC; -#elif !defined(ANOMALY_05000312) && !defined(ANOMALY_05000244) +#elif !ANOMALY_05000312 && !ANOMALY_05000244 #define SSYNC(scratch) SSYNC; #define CSYNC(scratch) CSYNC; diff --git a/include/asm-blackfin/mach-bf533/anomaly.h b/include/asm-blackfin/mach-bf533/anomaly.h index 2a63ffc250a..caea0b0f832 100644 --- a/include/asm-blackfin/mach-bf533/anomaly.h +++ b/include/asm-blackfin/mach-bf533/anomaly.h @@ -7,219 +7,252 @@ */ /* This file shoule be up to date with: - * - Revision U, May 17, 2006; ADSP-BF533 Blackfin Processor Anomaly List - * - Revision Y, May 17, 2006; ADSP-BF532 Blackfin Processor Anomaly List - * - Revision T, May 17, 2006; ADSP-BF531 Blackfin Processor Anomaly List + * - Revision X, March 23, 2007; ADSP-BF533 Blackfin Processor Anomaly List + * - Revision AB, March 23, 2007; ADSP-BF532 Blackfin Processor Anomaly List + * - Revision W, March 23, 2007; ADSP-BF531 Blackfin Processor Anomaly List */ #ifndef _MACH_ANOMALY_H_ #define _MACH_ANOMALY_H_ /* We do not support 0.1 or 0.2 silicon - sorry */ -#if (defined(CONFIG_BF_REV_0_1) || defined(CONFIG_BF_REV_0_2)) -#error Kernel will not work on BF533 Version 0.1 or 0.2 +#if __SILICON_REVISION__ < 3 +# error Kernel will not work on BF533 silicon version 0.0, 0.1, or 0.2 #endif -/* Issues that are common to 0.5, 0.4, and 0.3 silicon */ -#if (defined(CONFIG_BF_REV_0_5) || defined(CONFIG_BF_REV_0_4) \ - || defined(CONFIG_BF_REV_0_3)) -#define ANOMALY_05000074 /* A multi issue instruction with dsp32shiftimm in - * slot1 and store of a P register in slot 2 is not - * supported */ -#define ANOMALY_05000105 /* Watchpoint Status Register (WPSTAT) bits are set on - * every corresponding match */ -#define ANOMALY_05000119 /* DMA_RUN bit is not valid after a Peripheral Receive - * Channel DMA stops */ -#define ANOMALY_05000122 /* Rx.H can not be used to access 16-bit System MMR - * registers. */ -#define ANOMALY_05000166 /* PPI Data Lengths Between 8 and 16 do not zero out - * upper bits*/ -#define ANOMALY_05000167 /* Turning Serial Ports on With External Frame Syncs */ -#define ANOMALY_05000180 /* PPI_DELAY not functional in PPI modes with 0 frame - * syncs */ -#define ANOMALY_05000208 /* VSTAT status bit in PLL_STAT register is not - * functional */ -#define ANOMALY_05000219 /* NMI event at boot time results in unpredictable - * state */ -#define ANOMALY_05000229 /* SPI Slave Boot Mode modifies registers */ -#define ANOMALY_05000272 /* Certain data cache write through modes fail for - * VDDint <=0.9V */ -#define ANOMALY_05000273 /* Writes to Synchronous SDRAM memory may be lost */ -#define ANOMALY_05000277 /* Writes to a flag data register one SCLK cycle after - * an edge is detected may clear interrupt */ -#define ANOMALY_05000278 /* Disabling Peripherals with DMA running may cause - * DMA system instability */ -#define ANOMALY_05000281 /* False Hardware Error Exception when ISR context is - * not restored */ -#define ANOMALY_05000282 /* Memory DMA corruption with 32-bit data and traffic - * control */ -#define ANOMALY_05000283 /* A system MMR write is stalled indefinitely when - * killed in a particular stage*/ -#define ANOMALY_05000311 /* Erroneous flag pin operations under specific - * sequences */ -#define ANOMALY_05000312 /* Errors when SSYNC, CSYNC, or loads to LT, LB and LC - * registers are interrupted */ -#define ANOMALY_05000313 /* PPI Is Level-Sensitive on First Transfer */ -#define ANOMALY_05000315 /* Killed System MMR Write Completes Erroneously On - * Next System MMR Access */ -#define ANOMALY_05000319 /* Internal Voltage Regulator Values of 1.05V, 1.10V - * and 1.15V Not Allowed for LQFP Packages */ -#endif /* Issues that are common to 0.5, 0.4, and 0.3 silicon */ +#if defined(__ADSPBF531__) +# define ANOMALY_BF531 1 +#else +# define ANOMALY_BF531 0 +#endif +#if defined(__ADSPBF532__) +# define ANOMALY_BF532 1 +#else +# define ANOMALY_BF532 0 +#endif +#if defined(__ADSPBF533__) +# define ANOMALY_BF533 1 +#else +# define ANOMALY_BF533 0 +#endif -/* These issues only occur on 0.3 or 0.4 BF533 */ -#if (defined(CONFIG_BF_REV_0_4) || defined(CONFIG_BF_REV_0_3)) -#define ANOMALY_05000099 /* UART Line Status Register (UART_LSR) bits are not - * updated at the same time. */ -#define ANOMALY_05000158 /* Boot fails when data cache enabled: Data from a Data - * Cache Fill can be corrupted after or during - * Instruction DMA if certain core stalls exist */ -#define ANOMALY_05000179 /* PPI_COUNT cannot be programmed to 0 in General - * Purpose TX or RX modes */ -#define ANOMALY_05000198 /* Failing SYSTEM MMR accesses when stalled by - * preceding memory read */ -#define ANOMALY_05000200 /* SPORT TFS and DT are incorrectly driven during - * inactive channels in certain conditions */ -#define ANOMALY_05000202 /* Possible infinite stall with specific dual dag - * situation */ -#define ANOMALY_05000215 /* UART TX Interrupt masked erroneously */ -#define ANOMALY_05000225 /* Incorrect pulse-width of UART start-bit */ -#define ANOMALY_05000227 /* Scratchpad memory bank reads may return incorrect - * data*/ -#define ANOMALY_05000230 /* UART Receiver is less robust against Baudrate - * Differences in certain Conditions */ -#define ANOMALY_05000231 /* UART STB bit incorrectly affects receiver setting */ -#define ANOMALY_05000242 /* DF bit in PLL_CTL register does not respond to - * hardware reset */ -#define ANOMALY_05000244 /* With instruction cache enabled, a CSYNC or SSYNC or - * IDLE around a Change of Control causes - * unpredictable results */ -#define ANOMALY_05000245 /* Spurious Hardware Error from an access in the - * shadow of a conditional branch */ -#define ANOMALY_05000246 /* Data CPLB's should prevent spurious hardware - * errors */ -#define ANOMALY_05000253 /* Maximum external clock speed for Timers */ -#define ANOMALY_05000255 /* Entering Hibernate Mode with RTC Seconds event - * interrupt not functional */ -#define ANOMALY_05000257 /* An interrupt or exception during short Hardware - * loops may cause the instruction fetch unit to - * malfunction */ -#define ANOMALY_05000258 /* Instruction Cache is corrupted when bit 9 and 12 of - * the ICPLB Data registers differ */ -#define ANOMALY_05000260 /* ICPLB_STATUS MMR register may be corrupted */ -#define ANOMALY_05000261 /* DCPLB_FAULT_ADDR MMR register may be corrupted */ -#define ANOMALY_05000262 /* Stores to data cache may be lost */ -#define ANOMALY_05000263 /* Hardware loop corrupted when taking an ICPLB exception */ -#define ANOMALY_05000264 /* A Sync instruction (CSYNC, SSYNC) or an IDLE - * instruction will cause an infinite stall in the - * second to last instruction in a hardware loop */ -#define ANOMALY_05000265 /* Sensitivity to noise with slow input edge rates on - * SPORT external receive and transmit clocks. */ -#define ANOMALY_05000269 /* High I/O activity causes the output voltage of the - * internal voltage regulator (VDDint) to increase. */ -#define ANOMALY_05000270 /* High I/O activity causes the output voltage of the - * internal voltage regulator (VDDint) to decrease */ -#endif /* issues only occur on 0.3 or 0.4 BF533 */ +/* Multi-Issue Instruction with dsp32shiftimm in slot1 and P-reg Store in slot 2 Not Supported */ +#define ANOMALY_05000074 (1) +/* UART Line Status Register (UART_LSR) Bits Are Not Updated at the Same Time */ +#define ANOMALY_05000099 (__SILICON_REVISION__ < 5) +/* Watchpoint Status Register (WPSTAT) Bits Are Set on Every Corresponding Match */ +#define ANOMALY_05000105 (1) +/* DMA_RUN Bit Is Not Valid after a Peripheral Receive Channel DMA Stops */ +#define ANOMALY_05000119 (1) +/* Rx.H Cannot Be Used to Access 16-bit System MMR Registers */ +#define ANOMALY_05000122 (1) +/* Instruction DMA Can Cause Data Cache Fills to Fail (Boot Implications) */ +#define ANOMALY_05000158 (__SILICON_REVISION__ < 5) +/* PPI Data Lengths Between 8 and 16 Do Not Zero Out Upper Bits */ +#define ANOMALY_05000166 (1) +/* Turning Serial Ports on with External Frame Syncs */ +#define ANOMALY_05000167 (1) +/* PPI_COUNT Cannot Be Programmed to 0 in General Purpose TX or RX Modes */ +#define ANOMALY_05000179 (__SILICON_REVISION__ < 5) +/* PPI_DELAY Not Functional in PPI Modes with 0 Frame Syncs */ +#define ANOMALY_05000180 (1) +/* Timer Pin Limitations for PPI TX Modes with External Frame Syncs */ +#define ANOMALY_05000183 (__SILICON_REVISION__ < 4) +/* False Protection Exceptions */ +#define ANOMALY_05000189 (__SILICON_REVISION__ < 4) +/* False I/O Pin Interrupts on Edge-Sensitive Inputs When Polarity Setting Is Changed */ +#define ANOMALY_05000193 (__SILICON_REVISION__ < 4) +/* Restarting SPORT in Specific Modes May Cause Data Corruption */ +#define ANOMALY_05000194 (__SILICON_REVISION__ < 4) +/* Failing MMR Accesses When Stalled by Preceding Memory Read */ +#define ANOMALY_05000198 (__SILICON_REVISION__ < 5) +/* Current DMA Address Shows Wrong Value During Carry Fix */ +#define ANOMALY_05000199 (__SILICON_REVISION__ < 4) +/* SPORT TFS and DT Are Incorrectly Driven During Inactive Channels in Certain Conditions */ +#define ANOMALY_05000200 (__SILICON_REVISION__ < 5) +/* Receive Frame Sync Not Ignored During Active Frames in SPORT Multi-Channel Mode */ +#define ANOMALY_05000201 (__SILICON_REVISION__ < 4) +/* Possible Infinite Stall with Specific Dual-DAG Situation */ +#define ANOMALY_05000202 (__SILICON_REVISION__ < 5) +/* Specific Sequence That Can Cause DMA Error or DMA Stopping */ +#define ANOMALY_05000203 (__SILICON_REVISION__ < 4) +/* Incorrect data read with write-through cache and allocate cache lines on reads only mode */ +#define ANOMALY_05000204 (__SILICON_REVISION__ < 4 && ANOMALY_BF533) +/* Recovery from "Brown-Out" Condition */ +#define ANOMALY_05000207 (__SILICON_REVISION__ < 4) +/* VSTAT Status Bit in PLL_STAT Register Is Not Functional */ +#define ANOMALY_05000208 (1) +/* Speed Path in Computational Unit Affects Certain Instructions */ +#define ANOMALY_05000209 (__SILICON_REVISION__ < 4) +/* UART TX Interrupt Masked Erroneously */ +#define ANOMALY_05000215 (__SILICON_REVISION__ < 5) +/* NMI Event at Boot Time Results in Unpredictable State */ +#define ANOMALY_05000219 (1) +/* Incorrect Pulse-Width of UART Start Bit */ +#define ANOMALY_05000225 (__SILICON_REVISION__ < 5) +/* Scratchpad Memory Bank Reads May Return Incorrect Data */ +#define ANOMALY_05000227 (__SILICON_REVISION__ < 5) +/* SPI Slave Boot Mode Modifies Registers from Reset Value */ +#define ANOMALY_05000229 (1) +/* UART Receiver is Less Robust Against Baudrate Differences in Certain Conditions */ +#define ANOMALY_05000230 (__SILICON_REVISION__ < 5) +/* UART STB Bit Incorrectly Affects Receiver Setting */ +#define ANOMALY_05000231 (__SILICON_REVISION__ < 5) +/* PPI_FS3 Is Not Driven in 2 or 3 Internal Frame Sync Transmit Modes */ +#define ANOMALY_05000233 (__SILICON_REVISION__ < 4) +/* Incorrect Revision Number in DSPID Register */ +#define ANOMALY_05000234 (__SILICON_REVISION__ == 4) +/* DF Bit in PLL_CTL Register Does Not Respond to Hardware Reset */ +#define ANOMALY_05000242 (__SILICON_REVISION__ < 4) +/* If I-Cache Is On, CSYNC/SSYNC/IDLE Around Change of Control Causes Failures */ +#define ANOMALY_05000244 (__SILICON_REVISION__ < 5) +/* Spurious Hardware Error from an Access in the Shadow of a Conditional Branch */ +#define ANOMALY_05000245 (1) +/* Data CPLBs Should Prevent Spurious Hardware Errors */ +#define ANOMALY_05000246 (__SILICON_REVISION__ < 5) +/* Incorrect Bit Shift of Data Word in Multichannel (TDM) Mode in Certain Conditions */ +#define ANOMALY_05000250 (__SILICON_REVISION__ == 4) +/* Maximum External Clock Speed for Timers */ +#define ANOMALY_05000253 (__SILICON_REVISION__ < 5) +/* Incorrect Timer Pulse Width in Single-Shot PWM_OUT Mode with External Clock */ +#define ANOMALY_05000254 (__SILICON_REVISION__ > 4) +/* Entering Hibernate State with RTC Seconds Interrupt Not Functional */ +#define ANOMALY_05000255 (__SILICON_REVISION__ < 5) +/* Interrupt/Exception During Short Hardware Loop May Cause Bad Instruction Fetches */ +#define ANOMALY_05000257 (__SILICON_REVISION__ < 5) +/* Instruction Cache Is Corrupted When Bits 9 and 12 of the ICPLB Data Registers Differ */ +#define ANOMALY_05000258 (__SILICON_REVISION__ < 5) +/* ICPLB_STATUS MMR Register May Be Corrupted */ +#define ANOMALY_05000260 (__SILICON_REVISION__ < 5) +/* DCPLB_FAULT_ADDR MMR Register May Be Corrupted */ +#define ANOMALY_05000261 (__SILICON_REVISION__ < 5) +/* Stores To Data Cache May Be Lost */ +#define ANOMALY_05000262 (__SILICON_REVISION__ < 5) +/* Hardware Loop Corrupted When Taking an ICPLB Exception */ +#define ANOMALY_05000263 (__SILICON_REVISION__ < 5) +/* CSYNC/SSYNC/IDLE Causes Infinite Stall in Penultimate Instruction in Hardware Loop */ +#define ANOMALY_05000264 (__SILICON_REVISION__ < 5) +/* Sensitivity To Noise with Slow Input Edge Rates on External SPORT TX and RX Clocks */ +#define ANOMALY_05000265 (__SILICON_REVISION__ < 5) +/* High I/O Activity Causes Output Voltage of Internal Voltage Regulator (Vddint) to Increase */ +#define ANOMALY_05000269 (__SILICON_REVISION__ < 5) +/* High I/O Activity Causes Output Voltage of Internal Voltage Regulator (Vddint) to Decrease */ +#define ANOMALY_05000270 (__SILICON_REVISION__ < 5) +/* Spontaneous Reset of Internal Voltage Regulator */ +#define ANOMALY_05000271 (__SILICON_REVISION__ < 4) +/* Certain Data Cache Writethrough Modes Fail for Vddint <= 0.9V */ +#define ANOMALY_05000272 (1) +/* Writes to Synchronous SDRAM Memory May Be Lost */ +#define ANOMALY_05000273 (1) +/* Timing Requirements Change for External Frame Sync PPI Modes with Non-Zero PPI_DELAY */ +#define ANOMALY_05000276 (1) +/* Writes to an I/O Data Register One SCLK Cycle after an Edge Is Detected May Clear Interrupt */ +#define ANOMALY_05000277 (1) +/* Disabling Peripherals with DMA Running May Cause DMA System Instability */ +#define ANOMALY_05000278 (1) +/* False Hardware Error Exception When ISR Context Is Not Restored */ +#define ANOMALY_05000281 (1) +/* Memory DMA Corruption with 32-Bit Data and Traffic Control */ +#define ANOMALY_05000282 (1) +/* System MMR Write Is Stalled Indefinitely When Killed in a Particular Stage */ +#define ANOMALY_05000283 (1) +/* SPORTs May Receive Bad Data If FIFOs Fill Up */ +#define ANOMALY_05000288 (1) +/* Memory-To-Memory DMA Source/Destination Descriptors Must Be in Same Memory Space */ +#define ANOMALY_05000301 (1) +/* SSYNCs After Writes To DMA MMR Registers May Not Be Handled Correctly */ +#define ANOMALY_05000302 (__SILICON_REVISION__ < 5) +/* New Feature: Additional Hysteresis on SPORT Input Pins (Not Available On Older Silicon) */ +#define ANOMALY_05000305 (__SILICON_REVISION__ < 5) +/* New Feature: Additional PPI Frame Sync Sampling Options (Not Available On Older Silicon) */ +#define ANOMALY_05000306 (__SILICON_REVISION__ < 5) +/* False Hardware Errors Caused by Fetches at the Boundary of Reserved Memory */ +#define ANOMALY_05000310 (1) +/* Erroneous Flag (GPIO) Pin Operations under Specific Sequences */ +#define ANOMALY_05000311 (1) +/* Errors When SSYNC, CSYNC, or Loads to LT, LB and LC Registers Are Interrupted */ +#define ANOMALY_05000312 (1) +/* PPI Is Level-Sensitive on First Transfer */ +#define ANOMALY_05000313 (1) +/* Killed System MMR Write Completes Erroneously On Next System MMR Access */ +#define ANOMALY_05000315 (1) +/* Internal Voltage Regulator Values of 1.05V, 1.10V and 1.15V Not Allowed for LQFP Packages */ +#define ANOMALY_05000319 (ANOMALY_BF531 || ANOMALY_BF532) -/* These issues are only on 0.4 silicon */ -#if (defined(CONFIG_BF_REV_0_4)) -#define ANOMALY_05000234 /* Incorrect Revision Number in DSPID Register */ -#define ANOMALY_05000250 /* Incorrect Bit-Shift of Data Word in Multichannel - * (TDM) */ -#endif /* issues are only on 0.4 silicon */ +/* These anomalies have been "phased" out of analog.com anomaly sheets and are + * here to show running on older silicon just isn't feasible. + */ -/* These issues are only on 0.3 silicon */ -#if defined(CONFIG_BF_REV_0_3) -#define ANOMALY_05000183 /* Timer Pin limitations for PPI TX Modes with - * External Frame Syncs */ -#define ANOMALY_05000189 /* False Protection Exceptions caused by Speculative - * Instruction or Data Fetches, or by Fetches at the - * boundary of reserved memory space */ -#define ANOMALY_05000193 /* False Flag Pin Interrupts on Edge Sensitive Inputs - * when polarity setting is changed */ -#define ANOMALY_05000194 /* Sport Restarting in specific modes may cause data - * corruption */ -#define ANOMALY_05000199 /* DMA current address shows wrong value during carry - * fix */ -#define ANOMALY_05000201 /* Receive frame sync not ignored during active - * frames in sport MCM */ -#define ANOMALY_05000203 /* Specific sequence that can cause DMA error or DMA - * stopping */ -#if defined(CONFIG_BF533) -#define ANOMALY_05000204 /* Incorrect data read with write-through cache and - * allocate cache lines on reads only mode */ -#endif /* CONFIG_BF533 */ -#define ANOMALY_05000207 /* Recovery from "brown-out" condition */ -#define ANOMALY_05000209 /* Speed-Path in computational unit affects certain - * instructions */ -#define ANOMALY_05000233 /* PPI_FS3 is not driven in 2 or 3 internal Frame - * Sync Transmit Mode */ -#define ANOMALY_05000271 /* Spontaneous reset of Internal Voltage Regulator */ -#endif /* only on 0.3 silicon */ +/* Watchpoints (Hardware Breakpoints) are not supported */ +#define ANOMALY_05000067 (__SILICON_REVISION__ < 3) +/* Reserved bits in SYSCFG register not set at power on */ +#define ANOMALY_05000109 (__SILICON_REVISION__ < 3) +/* Trace Buffers may record discontinuities into emulation mode and/or exception, NMI, reset handlers */ +#define ANOMALY_05000116 (__SILICON_REVISION__ < 3) +/* DTEST_COMMAND initiated memory access may be incorrect if data cache or DMA is active */ +#define ANOMALY_05000123 (__SILICON_REVISION__ < 3) +/* DMA Lock-up at CCLK to SCLK ratios of 4:1, 2:1, or 1:1 */ +#define ANOMALY_05000124 (__SILICON_REVISION__ < 3) +/* Erroneous exception when enabling cache */ +#define ANOMALY_05000125 (__SILICON_REVISION__ < 3) +/* SPI clock polarity and phase bits incorrect during booting */ +#define ANOMALY_05000126 (__SILICON_REVISION__ < 3) +/* DMEM_CONTROL is not set on Reset */ +#define ANOMALY_05000137 (__SILICON_REVISION__ < 3) +/* SPI boot will not complete if there is a zero fill block in the loader file */ +#define ANOMALY_05000138 (__SILICON_REVISION__ < 3) +/* Allowing the SPORT RX FIFO to fill will cause an overflow */ +#define ANOMALY_05000140 (__SILICON_REVISION__ < 3) +/* An Infinite Stall occurs with a particular sequence of consecutive dual dag events */ +#define ANOMALY_05000141 (__SILICON_REVISION__ < 3) +/* Interrupts may be lost when a programmable input flag is configured to be edge sensitive */ +#define ANOMALY_05000142 (__SILICON_REVISION__ < 3) +/* A read from external memory may return a wrong value with data cache enabled */ +#define ANOMALY_05000143 (__SILICON_REVISION__ < 3) +/* DMA and TESTSET conflict when both are accessing external memory */ +#define ANOMALY_05000144 (__SILICON_REVISION__ < 3) +/* In PWM_OUT mode, you must enable the PPI block to generate a waveform from PPI_CLK */ +#define ANOMALY_05000145 (__SILICON_REVISION__ < 3) +/* MDMA may lose the first few words of a descriptor chain */ +#define ANOMALY_05000146 (__SILICON_REVISION__ < 3) +/* The source MDMA descriptor may stop with a DMA Error */ +#define ANOMALY_05000147 (__SILICON_REVISION__ < 3) +/* When booting from a 16-bit asynchronous memory device, the upper 8-bits of each word must be 0x00 */ +#define ANOMALY_05000148 (__SILICON_REVISION__ < 3) +/* Frame Delay in SPORT Multichannel Mode */ +#define ANOMALY_05000153 (__SILICON_REVISION__ < 3) +/* SPORT TFS signal is active in Multi-channel mode outside of valid channels */ +#define ANOMALY_05000154 (__SILICON_REVISION__ < 3) +/* Timer1 can not be used for PWMOUT mode when a certain PPI mode is in use */ +#define ANOMALY_05000155 (__SILICON_REVISION__ < 3) +/* A killed 32-bit System MMR write will lead to the next system MMR access thinking it should be 32-bit. */ +#define ANOMALY_05000157 (__SILICON_REVISION__ < 3) +/* SPORT transmit data is not gated by external frame sync in certain conditions */ +#define ANOMALY_05000163 (__SILICON_REVISION__ < 3) +/* SDRAM auto-refresh and subsequent Power Ups */ +#define ANOMALY_05000168 (__SILICON_REVISION__ < 3) +/* DATA CPLB page miss can result in lost write-through cache data writes */ +#define ANOMALY_05000169 (__SILICON_REVISION__ < 3) +/* DMA vs Core accesses to external memory */ +#define ANOMALY_05000173 (__SILICON_REVISION__ < 3) +/* Cache Fill Buffer Data lost */ +#define ANOMALY_05000174 (__SILICON_REVISION__ < 3) +/* Overlapping Sequencer and Memory Stalls */ +#define ANOMALY_05000175 (__SILICON_REVISION__ < 3) +/* Multiplication of (-1) by (-1) followed by an accumulator saturation */ +#define ANOMALY_05000176 (__SILICON_REVISION__ < 3) +/* Disabling the PPI resets the PPI configuration registers */ +#define ANOMALY_05000181 (__SILICON_REVISION__ < 3) +/* PPI TX Mode with 2 External Frame Syncs */ +#define ANOMALY_05000185 (__SILICON_REVISION__ < 3) +/* PPI does not invert the Driving PPICLK edge in Transmit Modes */ +#define ANOMALY_05000191 (__SILICON_REVISION__ < 3) +/* In PPI Transmit Modes with External Frame Syncs POLC */ +#define ANOMALY_05000192 (__SILICON_REVISION__ < 3) +/* Internal Voltage Regulator may not start up */ +#define ANOMALY_05000206 (__SILICON_REVISION__ < 3) -#if defined(CONFIG_BF_REV_0_2) -#define ANOMALY_05000067 /* Watchpoints (Hardware Breakpoints) are not - * supported */ -#define ANOMALY_05000109 /* Reserved bits in SYSCFG register not set at - * power on */ -#define ANOMALY_05000116 /* Trace Buffers may record discontinuities into - * emulation mode and/or exception, NMI, reset - * handlers */ -#define ANOMALY_05000123 /* DTEST_COMMAND initiated memory access may be - * incorrect if data cache or DMA is active */ -#define ANOMALY_05000124 /* DMA Lock-up at CCLK to SCLK ratios of 4:1, 2:1, - * or 1:1 */ -#define ANOMALY_05000125 /* Erroneous exception when enabling cache */ -#define ANOMALY_05000126 /* SPI clock polarity and phase bits incorrect - * during booting */ -#define ANOMALY_05000137 /* DMEM_CONTROL is not set on Reset */ -#define ANOMALY_05000138 /* SPI boot will not complete if there is a zero fill - * block in the loader file */ -#define ANOMALY_05000140 /* Allowing the SPORT RX FIFO to fill will cause an - * overflow */ -#define ANOMALY_05000141 /* An Infinite Stall occurs with a particular sequence - * of consecutive dual dag events */ -#define ANOMALY_05000142 /* Interrupts may be lost when a programmable input - * flag is configured to be edge sensitive */ -#define ANOMALY_05000143 /* A read from external memory may return a wrong - * value with data cache enabled */ -#define ANOMALY_05000144 /* DMA and TESTSET conflict when both are accessing - * external memory */ -#define ANOMALY_05000145 /* In PWM_OUT mode, you must enable the PPI block to - * generate a waveform from PPI_CLK */ -#define ANOMALY_05000146 /* MDMA may lose the first few words of a descriptor - * chain */ -#define ANOMALY_05000147 /* The source MDMA descriptor may stop with a DMA - * Error */ -#define ANOMALY_05000148 /* When booting from a 16-bit asynchronous memory - * device, the upper 8-bits of each word must be - * 0x00 */ -#define ANOMALY_05000153 /* Frame Delay in SPORT Multichannel Mode */ -#define ANOMALY_05000154 /* SPORT TFS signal is active in Multi-channel mode - * outside of valid channels */ -#define ANOMALY_05000155 /* Timer1 can not be used for PWMOUT mode when a - * certain PPI mode is in use */ -#define ANOMALY_05000157 /* A killed 32-bit System MMR write will lead to - * the next system MMR access thinking it should be - * 32-bit. */ -#define ANOMALY_05000163 /* SPORT transmit data is not gated by external frame - * sync in certain conditions */ -#define ANOMALY_05000168 /* SDRAM auto-refresh and subsequent Power Ups */ -#define ANOMALY_05000169 /* DATA CPLB page miss can result in lost - * write-through cache data writes */ -#define ANOMALY_05000173 /* DMA vs Core accesses to external memory */ -#define ANOMALY_05000174 /* Cache Fill Buffer Data lost */ -#define ANOMALY_05000175 /* Overlapping Sequencer and Memory Stalls */ -#define ANOMALY_05000176 /* Multiplication of (-1) by (-1) followed by an - * accumulator saturation */ -#define ANOMALY_05000181 /* Disabling the PPI resets the PPI configuration - * registers */ -#define ANOMALY_05000185 /* PPI TX Mode with 2 External Frame Syncs */ -#define ANOMALY_05000191 /* PPI does not invert the Driving PPICLK edge in - * Transmit Modes */ -#define ANOMALY_05000192 /* In PPI Transmit Modes with External Frame Syncs - * POLC */ -#define ANOMALY_05000206 /* Internal Voltage Regulator may not start up */ +/* Anomalies that don't exist on this proc */ +#define ANOMALY_05000266 (0) #endif - -#endif /* _MACH_ANOMALY_H_ */ diff --git a/include/asm-blackfin/mach-bf533/bf533.h b/include/asm-blackfin/mach-bf533/bf533.h index 185fc128485..41e4e834e2d 100644 --- a/include/asm-blackfin/mach-bf533/bf533.h +++ b/include/asm-blackfin/mach-bf533/bf533.h @@ -226,7 +226,7 @@ #define CONFIG_CCLK_ACT_DIV CONFIG_CCLK_DIV_not_defined_properly #endif -#if defined(ANOMALY_05000273) && (CONFIG_CCLK_DIV == 1) +#if ANOMALY_05000273 && (CONFIG_CCLK_DIV == 1) #error ANOMALY 05000273, please make sure CCLK is at least 2x SCLK #endif diff --git a/include/asm-blackfin/mach-bf537/anomaly.h b/include/asm-blackfin/mach-bf537/anomaly.h index 5c5e33dec5f..dc736c61980 100644 --- a/include/asm-blackfin/mach-bf537/anomaly.h +++ b/include/asm-blackfin/mach-bf537/anomaly.h @@ -7,109 +7,137 @@ */ /* This file shoule be up to date with: - * - Revision J, June 1, 2006; ADSP-BF537 Blackfin Processor Anomaly List - * - Revision I, June 1, 2006; ADSP-BF536 Blackfin Processor Anomaly List - * - Revision J, June 1, 2006; ADSP-BF534 Blackfin Processor Anomaly List + * - Revision M, March 13, 2007; ADSP-BF537 Blackfin Processor Anomaly List + * - Revision L, March 13, 2007; ADSP-BF536 Blackfin Processor Anomaly List + * - Revision M, March 13, 2007; ADSP-BF534 Blackfin Processor Anomaly List */ #ifndef _MACH_ANOMALY_H_ #define _MACH_ANOMALY_H_ /* We do not support 0.1 silicon - sorry */ -#if (defined(CONFIG_BF_REV_0_1)) -#error Kernel will not work on BF537/6/4 Version 0.1 +#if __SILICON_REVISION__ < 2 +# error Kernel will not work on BF537 silicon version 0.0 or 0.1 #endif -#if (defined(CONFIG_BF_REV_0_3) || defined(CONFIG_BF_REV_0_2)) -#define ANOMALY_05000074 /* A multi issue instruction with dsp32shiftimm in - * slot1 and store of a P register in slot 2 is not - * supported */ -#define ANOMALY_05000119 /* DMA_RUN bit is not valid after a Peripheral Receive - * Channel DMA stops */ -#define ANOMALY_05000122 /* Rx.H can not be used to access 16-bit System MMR - * registers. */ -#define ANOMALY_05000166 /* PPI Data Lengths Between 8 and 16 do not zero out - * upper bits*/ -#define ANOMALY_05000180 /* PPI_DELAY not functional in PPI modes with 0 frame - * syncs */ -#if (defined(CONFIG_BF537) || defined(CONFIG_BF536)) -#define ANOMALY_05000247 /* CLKIN Buffer Output Enable Reset Behavior Is - * Changed */ +#if defined(__ADSPBF534__) +# define ANOMALY_BF534 1 +#else +# define ANOMALY_BF534 0 #endif -#define ANOMALY_05000265 /* Sensitivity to noise with slow input edge rates on - * SPORT external receive and transmit clocks. */ -#define ANOMALY_05000272 /* Certain data cache write through modes fail for - * VDDint <=0.9V */ -#define ANOMALY_05000273 /* Writes to Synchronous SDRAM memory may be lost */ -#define ANOMALY_05000277 /* Writes to a flag data register one SCLK cycle after - * an edge is detected may clear interrupt */ -#define ANOMALY_05000281 /* False Hardware Error Exception when ISR context is - * not restored */ -#define ANOMALY_05000282 /* Memory DMA corruption with 32-bit data and traffic - * control */ -#define ANOMALY_05000283 /* A system MMR write is stalled indefinitely when - * killed in a particular stage*/ -#define ANOMALY_05000310 /* False hardware errors caused by fetches at the - * boundary of reserved memory */ -#define ANOMALY_05000312 /* Errors when SSYNC, CSYNC, or loads to LT, LB and LC - * registers are interrupted */ -#define ANOMALY_05000313 /* PPI is level sensitive on first transfer */ -#define ANOMALY_05000322 /* EMAC RMII mode at 10-Base-T speed: RX frames not - * received properly */ +#if defined(__ADSPBF536__) +# define ANOMALY_BF536 1 +#else +# define ANOMALY_BF536 0 #endif - -#if defined(CONFIG_BF_REV_0_2) -#define ANOMALY_05000244 /* With instruction cache enabled, a CSYNC or SSYNC or - * IDLE around a Change of Control causes - * unpredictable results */ -#define ANOMALY_05000250 /* Incorrect Bit-Shift of Data Word in Multichannel - * (TDM) */ -#if (defined(CONFIG_BF537) || defined(CONFIG_BF536)) -#define ANOMALY_05000252 /* EMAC Tx DMA error after an early frame abort */ -#endif -#define ANOMALY_05000253 /* Maximum external clock speed for Timers */ -#define ANOMALY_05000255 /* Entering Hibernate Mode with RTC Seconds event - * interrupt not functional */ -#if (defined(CONFIG_BF537) || defined(CONFIG_BF536)) -#define ANOMALY_05000256 /* EMAC MDIO input latched on wrong MDC edge */ +#if defined(__ADSPBF537__) +# define ANOMALY_BF537 1 +#else +# define ANOMALY_BF537 0 #endif -#define ANOMALY_05000257 /* An interrupt or exception during short Hardware - * loops may cause the instruction fetch unit to - * malfunction */ -#define ANOMALY_05000258 /* Instruction Cache is corrupted when bit 9 and 12 of - * the ICPLB Data registers differ */ -#define ANOMALY_05000260 /* ICPLB_STATUS MMR register may be corrupted */ -#define ANOMALY_05000261 /* DCPLB_FAULT_ADDR MMR register may be corrupted */ -#define ANOMALY_05000262 /* Stores to data cache may be lost */ -#define ANOMALY_05000263 /* Hardware loop corrupted when taking an ICPLB exception */ -#define ANOMALY_05000264 /* A Sync instruction (CSYNC, SSYNC) or an IDLE - * instruction will cause an infinite stall in the - * second to last instruction in a hardware loop */ -#define ANOMALY_05000268 /* Memory DMA error when peripheral DMA is running - * and non-zero DEB_TRAFFIC_PERIOD value */ -#define ANOMALY_05000270 /* High I/O activity causes the output voltage of the - * internal voltage regulator (VDDint) to decrease */ -#define ANOMALY_05000277 /* Writes to a flag data register one SCLK cycle after - * an edge is detected may clear interrupt */ -#define ANOMALY_05000278 /* Disabling Peripherals with DMA running may cause - * DMA system instability */ -#define ANOMALY_05000280 /* SPI Master boot mode does not work well with - * Atmel Dataflash devices */ -#define ANOMALY_05000281 /* False Hardware Error Exception when ISR context - * is not restored */ -#define ANOMALY_05000282 /* Memory DMA corruption with 32-bit data and traffic - * control */ -#define ANOMALY_05000283 /* System MMR Write Is Stalled Indefinitely When - * Killed in a Particular Stage */ -#define ANOMALY_05000285 /* New Feature: EMAC TX DMA Word Alignment - * (Not Available On Older Silicon) */ -#define ANOMALY_05000288 /* SPORTs may receive bad data if FIFOs fill up */ -#define ANOMALY_05000315 /* Killed System MMR Write Completes Erroneously - * On Next System MMR Access */ -#define ANOMALY_05000316 /* EMAC RMII mode: collisions occur in Full Duplex - * mode */ -#define ANOMALY_05000321 /* EMAC RMII mode: TX frames in half duplex fail with - * status No Carrier */ -#endif /* CONFIG_BF_REV_0_2 */ -#endif /* _MACH_ANOMALY_H_ */ +/* Multi-issue instruction with dsp32shiftimm in slot1 and P-reg store in slot 2 not supported */ +#define ANOMALY_05000074 (1) +/* DMA_RUN bit is not valid after a Peripheral Receive Channel DMA stops */ +#define ANOMALY_05000119 (1) +/* Rx.H cannot be used to access 16-bit System MMR registers */ +#define ANOMALY_05000122 (1) +/* Killed 32-bit MMR write leads to next system MMR access thinking it should be 32-bit */ +#define ANOMALY_05000157 (__SILICON_REVISION__ < 2) +/* PPI Data Lengths Between 8 and 16 do not zero out upper bits*/ +#define ANOMALY_05000166 (1) /* XXX: deleted from BF537 sheet ? */ +/* PPI_DELAY not functional in PPI modes with 0 frame syncs */ +#define ANOMALY_05000180 (1) +/* Instruction Cache Is Not Functional */ +#define ANOMALY_05000237 (__SILICON_REVISION__ < 2) +/* If i-cache is on, CSYNC/SSYNC/IDLE around Change of Control causes failures */ +#define ANOMALY_05000244 (__SILICON_REVISION__ < 3) +/* Spurious Hardware Error from an access in the shadow of a conditional branch */ +#define ANOMALY_05000245 (1) +/* CLKIN Buffer Output Enable Reset Behavior Is Changed */ +#define ANOMALY_05000247 (1) +/* Incorrect Bit-Shift of Data Word in Multichannel (TDM) mode in certain conditions */ +#define ANOMALY_05000250 (__SILICON_REVISION__ < 3) +/* EMAC Tx DMA error after an early frame abort */ +#define ANOMALY_05000252 (__SILICON_REVISION__ < 3) +/* Maximum external clock speed for Timers */ +#define ANOMALY_05000253 (__SILICON_REVISION__ < 3) +/* Incorrect Timer Pulse Width in Single-Shot PWM_OUT mode with external clock */ +#define ANOMALY_05000254 (__SILICON_REVISION__ > 2) +/* Entering Hibernate Mode with RTC Seconds event interrupt not functional */ +#define ANOMALY_05000255 (__SILICON_REVISION__ < 3) +/* EMAC MDIO input latched on wrong MDC edge */ +#define ANOMALY_05000256 (__SILICON_REVISION__ < 3) +/* Interrupt/Exception during short hardware loop may cause bad instruction fetches */ +#define ANOMALY_05000257 (__SILICON_REVISION__ < 3) +/* Instruction Cache is corrupted when bits 9 and 12 of the ICPLB Data registers differ */ +#define ANOMALY_05000258 (((ANOMALY_BF536 || ANOMALY_BF537) && __SILICON_REVISION__ == 1) || __SILICON_REVISION__ == 2) +/* ICPLB_STATUS MMR register may be corrupted */ +#define ANOMALY_05000260 (__SILICON_REVISION__ == 2) +/* DCPLB_FAULT_ADDR MMR register may be corrupted */ +#define ANOMALY_05000261 (__SILICON_REVISION__ < 3) +/* Stores to data cache may be lost */ +#define ANOMALY_05000262 (__SILICON_REVISION__ < 3) +/* Hardware loop corrupted when taking an ICPLB exception */ +#define ANOMALY_05000263 (__SILICON_REVISION__ == 2) +/* CSYNC/SSYNC/IDLE causes infinite stall in second to last instruction in hardware loop */ +#define ANOMALY_05000264 (__SILICON_REVISION__ < 3) +/* Sensitivity to noise with slow input edge rates on external SPORT TX and RX clocks */ +#define ANOMALY_05000265 (1) +/* Memory DMA error when peripheral DMA is running with non-zero DEB_TRAFFIC_PERIOD */ +#define ANOMALY_05000268 (__SILICON_REVISION__ < 3) +/* High I/O activity causes output voltage of internal voltage regulator (VDDint) to decrease */ +#define ANOMALY_05000270 (__SILICON_REVISION__ < 3) +/* Certain data cache write through modes fail for VDDint <=0.9V */ +#define ANOMALY_05000272 (1) +/* Writes to Synchronous SDRAM memory may be lost */ +#define ANOMALY_05000273 (__SILICON_REVISION__ < 3) +/* Writes to an I/O data register one SCLK cycle after an edge is detected may clear interrupt */ +#define ANOMALY_05000277 (__SILICON_REVISION__ < 3) +/* Disabling Peripherals with DMA running may cause DMA system instability */ +#define ANOMALY_05000278 (((ANOMALY_BF536 || ANOMALY_BF537) && __SILICON_REVISION__ < 3) || (ANOMALY_BF534 && __SILICON_REVISION__ < 2)) +/* SPI Master boot mode does not work well with Atmel Data flash devices */ +#define ANOMALY_05000280 (1) +/* False Hardware Error Exception when ISR context is not restored */ +#define ANOMALY_05000281 (__SILICON_REVISION__ < 3) +/* Memory DMA corruption with 32-bit data and traffic control */ +#define ANOMALY_05000282 (__SILICON_REVISION__ < 3) +/* System MMR Write Is Stalled Indefinitely When Killed in a Particular Stage */ +#define ANOMALY_05000283 (__SILICON_REVISION__ < 3) +/* New Feature: EMAC TX DMA Word Alignment (Not Available On Older Silicon) */ +#define ANOMALY_05000285 (__SILICON_REVISION__ < 3) +/* SPORTs may receive bad data if FIFOs fill up */ +#define ANOMALY_05000288 (__SILICON_REVISION__ < 3) +/* Memory to memory DMA source/destination descriptors must be in same memory space */ +#define ANOMALY_05000301 (1) +/* SSYNCs After Writes To CAN/DMA MMR Registers Are Not Always Handled Correctly */ +#define ANOMALY_05000304 (__SILICON_REVISION__ < 3) +/* New Feature: Additional Hysteresis on SPORT Input Pins (Not Available On Older Silicon) */ +#define ANOMALY_05000305 (__SILICON_REVISION__ < 3) +/* SCKELOW Bit Does Not Maintain State Through Hibernate */ +#define ANOMALY_05000307 (__SILICON_REVISION__ < 3) +/* Writing UART_THR while UART clock is disabled sends erroneous start bit */ +#define ANOMALY_05000309 (__SILICON_REVISION__ < 3) +/* False hardware errors caused by fetches at the boundary of reserved memory */ +#define ANOMALY_05000310 (1) +/* Errors when SSYNC, CSYNC, or loads to LT, LB and LC registers are interrupted */ +#define ANOMALY_05000312 (1) +/* PPI is level sensitive on first transfer */ +#define ANOMALY_05000313 (1) +/* Killed System MMR Write Completes Erroneously On Next System MMR Access */ +#define ANOMALY_05000315 (__SILICON_REVISION__ < 3) +/* EMAC RMII mode: collisions occur in Full Duplex mode */ +#define ANOMALY_05000316 (__SILICON_REVISION__ < 3) +/* EMAC RMII mode: TX frames in half duplex fail with status No Carrier */ +#define ANOMALY_05000321 (__SILICON_REVISION__ < 3) +/* EMAC RMII mode at 10-Base-T speed: RX frames not received properly */ +#define ANOMALY_05000322 (1) + +/* Anomalies that don't exist on this proc */ +#define ANOMALY_05000125 (0) +#define ANOMALY_05000183 (0) +#define ANOMALY_05000198 (0) +#define ANOMALY_05000266 (0) +#define ANOMALY_05000311 (0) + +#endif diff --git a/include/asm-blackfin/mach-bf537/bf537.h b/include/asm-blackfin/mach-bf537/bf537.h index b8924cd7730..04b08164e29 100644 --- a/include/asm-blackfin/mach-bf537/bf537.h +++ b/include/asm-blackfin/mach-bf537/bf537.h @@ -206,7 +206,7 @@ #define CONFIG_CCLK_ACT_DIV CONFIG_CCLK_DIV_not_defined_properly #endif -#if defined(ANOMALY_05000273) && (CONFIG_CCLK_DIV == 1) +#if ANOMALY_05000273 && (CONFIG_CCLK_DIV == 1) #error ANOMALY 05000273, please make sure CCLK is at least 2x SCLK #endif diff --git a/include/asm-blackfin/mach-bf548/anomaly.h b/include/asm-blackfin/mach-bf548/anomaly.h index 964a1c0ea63..952f03e140f 100644 --- a/include/asm-blackfin/mach-bf548/anomaly.h +++ b/include/asm-blackfin/mach-bf548/anomaly.h @@ -6,46 +6,62 @@ * Licensed under the GPL-2 or later. */ +/* This file shoule be up to date with: + * - Revision B, April 6, 2007; ADSP-BF549 Silicon Anomaly List + */ + #ifndef _MACH_ANOMALY_H_ #define _MACH_ANOMALY_H_ -#define ANOMALY_05000074 /* A multi issue instruction with dsp32shiftimm in - * slot1 and store of a P register in slot 2 is not - * supported */ -#define ANOMALY_05000119 /* DMA_RUN bit is not valid after a Peripheral Receive - * Channel DMA stops */ -#define ANOMALY_05000122 /* Rx.H can not be used to access 16-bit System MMR - * registers. */ -#define ANOMALY_05000245 /* Spurious Hardware Error from an Access in the - * Shadow of a Conditional Branch */ -#define ANOMALY_05000255 /* Entering Hibernate Mode with RTC Seconds event - * interrupt not functional */ -#define ANOMALY_05000265 /* Sensitivity to noise with slow input edge rates on - * SPORT external receive and transmit clocks. */ -#define ANOMALY_05000272 /* Certain data cache write through modes fail for - * VDDint <=0.9V */ -#define ANOMALY_05000281 /* False Hardware Error Exception when ISR context is - * not restored */ -#define ANOMALY_05000310 /* False Hardware Errors Caused by Fetches at the - * Boundary of Reserved Memory */ -#define ANOMALY_05000312 /* Errors When SSYNC, CSYNC, or Loads to LT, LB and - * LC Registers Are Interrupted */ -#define ANOMALY_05000324 /* TWI Slave Boot Mode Is Not Functional */ -#define ANOMALY_05000325 /* External FIFO Boot Mode Is Not Functional */ -#define ANOMALY_05000327 /* Data Lost When Core and DMA Accesses Are Made to - * the USB FIFO Simultaneously */ -#define ANOMALY_05000328 /* Incorrect Access of OTP_STATUS During otp_write() - * function */ -#define ANOMALY_05000329 /* Synchronous Burst Flash Boot Mode Is Not Functional - * */ -#define ANOMALY_05000330 /* Host DMA Boot Mode Is Not Functional */ -#define ANOMALY_05000334 /* Inadequate Timing Margins on DDR DQS to DQ and DQM - * Skew */ -#define ANOMALY_05000335 /* Inadequate Rotary Debounce Logic Duration */ -#define ANOMALY_05000336 /* Phantom Interrupt Occurs After First Configuration - * of Host DMA Port */ -#define ANOMALY_05000337 /* Disallowed Configuration Prevents Subsequent - * Allowed Configuration on Host DMA Port */ -#define ANOMALY_05000338 /* Slave-Mode SPI0 MISO Failure With CPHA = 0 */ +/* Multi-Issue Instruction with dsp32shiftimm in slot1 and P-reg Store in slot 2 Not Supported */ +#define ANOMALY_05000074 (1) +/* DMA_RUN Bit Is Not Valid after a Peripheral Receive Channel DMA Stops */ +#define ANOMALY_05000119 (1) +/* Rx.H Cannot Be Used to Access 16-bit System MMR Registers */ +#define ANOMALY_05000122 (1) +/* Spurious Hardware Error from an Access in the Shadow of a Conditional Branch */ +#define ANOMALY_05000245 (1) +/* Entering Hibernate State with RTC Seconds Interrupt Not Functional */ +#define ANOMALY_05000255 (1) +/* Sensitivity To Noise with Slow Input Edge Rates on External SPORT TX and RX Clocks */ +#define ANOMALY_05000265 (1) +/* Certain Data Cache Writethrough Modes Fail for Vddint <= 0.9V */ +#define ANOMALY_05000272 (1) +/* False Hardware Errors Caused by Fetches at the Boundary of Reserved Memory */ +#define ANOMALY_05000310 (1) +/* Errors When SSYNC, CSYNC, or Loads to LT, LB and LC Registers Are Interrupted */ +#define ANOMALY_05000312 (1) +/* TWI Slave Boot Mode Is Not Functional */ +#define ANOMALY_05000324 (1) +/* External FIFO Boot Mode Is Not Functional */ +#define ANOMALY_05000325 (1) +/* Data Lost When Core and DMA Accesses Are Made to the USB FIFO Simultaneously */ +#define ANOMALY_05000327 (1) +/* Incorrect Access of OTP_STATUS During otp_write() Function */ +#define ANOMALY_05000328 (1) +/* Synchronous Burst Flash Boot Mode Is Not Functional */ +#define ANOMALY_05000329 (1) +/* Host DMA Boot Mode Is Not Functional */ +#define ANOMALY_05000330 (1) +/* Inadequate Timing Margins on DDR DQS to DQ and DQM Skew */ +#define ANOMALY_05000334 (1) +/* Inadequate Rotary Debounce Logic Duration */ +#define ANOMALY_05000335 (1) +/* Phantom Interrupt Occurs After First Configuration of Host DMA Port */ +#define ANOMALY_05000336 (1) +/* Disallowed Configuration Prevents Subsequent Allowed Configuration on Host DMA Port */ +#define ANOMALY_05000337 (1) +/* Slave-Mode SPI0 MISO Failure With CPHA = 0 */ +#define ANOMALY_05000338 (1) + +/* Anomalies that don't exist on this proc */ +#define ANOMALY_05000125 (0) +#define ANOMALY_05000183 (0) +#define ANOMALY_05000198 (0) +#define ANOMALY_05000244 (0) +#define ANOMALY_05000263 (0) +#define ANOMALY_05000266 (0) +#define ANOMALY_05000273 (0) +#define ANOMALY_05000311 (0) -#endif /* _MACH_ANOMALY_H_ */ +#endif diff --git a/include/asm-blackfin/mach-bf561/anomaly.h b/include/asm-blackfin/mach-bf561/anomaly.h index 5a7986a83be..4cb3337d45e 100644 --- a/include/asm-blackfin/mach-bf561/anomaly.h +++ b/include/asm-blackfin/mach-bf561/anomaly.h @@ -7,155 +7,249 @@ */ /* This file shoule be up to date with: - * - Revision L, Aug 10, 2006; ADSP-BF561 Silicon Anomaly List + * - Revision N, March 28, 2007; ADSP-BF561 Silicon Anomaly List */ #ifndef _MACH_ANOMALY_H_ #define _MACH_ANOMALY_H_ -/* We do not support 0.1 or 0.4 silicon - sorry */ -#if (defined(CONFIG_BF_REV_0_1) || defined(CONFIG_BF_REV_0_2) || defined(CONFIG_BF_REV_0_4)) -#error Kernel will not work on BF561 Version 0.1, 0.2, or 0.4 +/* We do not support 0.1, 0.2, or 0.4 silicon - sorry */ +#if __SILICON_REVISION__ < 3 || __SILICON_REVISION__ == 4 +# error Kernel will not work on BF561 silicon version 0.0, 0.1, 0.2, or 0.4 #endif -/* Issues that are common to 0.5 and 0.3 silicon */ -#if (defined(CONFIG_BF_REV_0_5) || defined(CONFIG_BF_REV_0_3)) -#define ANOMALY_05000074 /* A multi issue instruction with dsp32shiftimm in - * slot1 and store of a P register in slot 2 is not - * supported */ -#define ANOMALY_05000099 /* UART Line Status Register (UART_LSR) bits are not - * updated at the same time. */ -#define ANOMALY_05000120 /* Testset instructions restricted to 32-bit aligned - * memory locations */ -#define ANOMALY_05000122 /* Rx.H cannot be used to access 16-bit System MMR - * registers */ -#define ANOMALY_05000127 /* Signbits instruction not functional under certain - * conditions */ -#define ANOMALY_05000149 /* IMDMA S1/D1 channel may stall */ -#define ANOMALY_05000166 /* PPI Data Lengths Between 8 and 16 do not zero out - * upper bits */ -#define ANOMALY_05000167 /* Turning Serial Ports on With External Frame Syncs */ -#define ANOMALY_05000180 /* PPI_DELAY not functional in PPI modes with 0 frame - * syncs */ -#define ANOMALY_05000182 /* IMDMA does not operate to full speed for 600MHz - * and higher devices */ -#define ANOMALY_05000187 /* IMDMA Corrupted Data after a Halt */ -#define ANOMALY_05000190 /* PPI not functional at core voltage < 1Volt */ -#define ANOMALY_05000208 /* VSTAT status bit in PLL_STAT register is not - * functional */ -#define ANOMALY_05000245 /* Spurious Hardware Error from an access in the - * shadow of a conditional branch */ -#define ANOMALY_05000257 /* Interrupt/Exception during short hardware loop - * may cause bad instruction fetches */ -#define ANOMALY_05000265 /* Sensitivity to noise with slow input edge rates on - * external SPORT TX and RX clocks */ -#define ANOMALY_05000267 /* IMDMA may corrupt data under certain conditions */ -#define ANOMALY_05000269 /* High I/O activity causes output voltage of internal - * voltage regulator (VDDint) to increase */ -#define ANOMALY_05000270 /* High I/O activity causes output voltage of internal - * voltage regulator (VDDint) to decrease */ -#define ANOMALY_05000272 /* Certain data cache write through modes fail for - * VDDint <=0.9V */ -#define ANOMALY_05000274 /* Data cache write back to external synchronous memory - * may be lost */ -#define ANOMALY_05000275 /* PPI Timing and sampling informaton updates */ -#define ANOMALY_05000312 /* Errors when SSYNC, CSYNC, or loads to LT, LB and LC - * registers are interrupted */ +/* Multi-Issue Instruction with dsp32shiftimm in slot1 and P-reg Store in slot 2 Not Supported */ +#define ANOMALY_05000074 (1) +/* UART Line Status Register (UART_LSR) Bits Are Not Updated at the Same Time */ +#define ANOMALY_05000099 (__SILICON_REVISION__ < 5) +/* Trace Buffers may contain errors in emulation mode and/or exception, NMI, reset handlers */ +#define ANOMALY_05000116 (__SILICON_REVISION__ < 3) +/* Testset instructions restricted to 32-bit aligned memory locations */ +#define ANOMALY_05000120 (1) +/* Rx.H Cannot Be Used to Access 16-bit System MMR Registers */ +#define ANOMALY_05000122 (1) +/* Erroneous exception when enabling cache */ +#define ANOMALY_05000125 (__SILICON_REVISION__ < 3) +/* Signbits instruction not functional under certain conditions */ +#define ANOMALY_05000127 (1) +/* Two bits in the Watchpoint Status Register (WPSTAT) are swapped */ +#define ANOMALY_05000134 (__SILICON_REVISION__ < 3) +/* Enable wires from the Data Watchpoint Address Control Register (WPDACTL) are swapped */ +#define ANOMALY_05000135 (__SILICON_REVISION__ < 3) +/* Stall in multi-unit DMA operations */ +#define ANOMALY_05000136 (__SILICON_REVISION__ < 3) +/* Allowing the SPORT RX FIFO to fill will cause an overflow */ +#define ANOMALY_05000140 (__SILICON_REVISION__ < 3) +/* Infinite Stall may occur with a particular sequence of consecutive dual dag events */ +#define ANOMALY_05000141 (__SILICON_REVISION__ < 3) +/* Interrupts may be lost when a programmable input flag is configured to be edge sensitive */ +#define ANOMALY_05000142 (__SILICON_REVISION__ < 3) +/* DMA and TESTSET conflict when both are accessing external memory */ +#define ANOMALY_05000144 (__SILICON_REVISION__ < 3) +/* In PWM_OUT mode, you must enable the PPI block to generate a waveform from PPI_CLK */ +#define ANOMALY_05000145 (__SILICON_REVISION__ < 3) +/* MDMA may lose the first few words of a descriptor chain */ +#define ANOMALY_05000146 (__SILICON_REVISION__ < 3) +/* Source MDMA descriptor may stop with a DMA Error near beginning of descriptor fetch */ +#define ANOMALY_05000147 (__SILICON_REVISION__ < 3) +/* IMDMA S1/D1 channel may stall */ +#define ANOMALY_05000149 (1) +/* DMA engine may lose data due to incorrect handshaking */ +#define ANOMALY_05000150 (__SILICON_REVISION__ < 3) +/* DMA stalls when all three controllers read data from the same source */ +#define ANOMALY_05000151 (__SILICON_REVISION__ < 3) +/* Execution stall when executing in L2 and doing external accesses */ +#define ANOMALY_05000152 (__SILICON_REVISION__ < 3) +/* Frame Delay in SPORT Multichannel Mode */ +#define ANOMALY_05000153 (__SILICON_REVISION__ < 3) +/* SPORT TFS signal stays active in multichannel mode outside of valid channels */ +#define ANOMALY_05000154 (__SILICON_REVISION__ < 3) +/* Timers in PWM-Out Mode with PPI GP Receive (Input) Mode with 0 Frame Syncs */ +#define ANOMALY_05000156 (__SILICON_REVISION__ < 4) +/* Killed 32-bit MMR write leads to next system MMR access thinking it should be 32-bit */ +#define ANOMALY_05000157 (__SILICON_REVISION__ < 3) +/* DMA Lock-up at CCLK to SCLK ratios of 4:1, 2:1, or 1:1 */ +#define ANOMALY_05000159 (__SILICON_REVISION__ < 3) +/* A read from external memory may return a wrong value with data cache enabled */ +#define ANOMALY_05000160 (__SILICON_REVISION__ < 3) +/* Data Cache Fill data can be corrupted after/during Instruction DMA if certain core stalls exist */ +#define ANOMALY_05000161 (__SILICON_REVISION__ < 3) +/* DMEM_CONTROL<12> is not set on Reset */ +#define ANOMALY_05000162 (__SILICON_REVISION__ < 3) +/* SPORT transmit data is not gated by external frame sync in certain conditions */ +#define ANOMALY_05000163 (__SILICON_REVISION__ < 3) +/* PPI Data Lengths Between 8 and 16 Do Not Zero Out Upper Bits */ +#define ANOMALY_05000166 (1) +/* Turning Serial Ports on with External Frame Syncs */ +#define ANOMALY_05000167 (1) +/* SDRAM auto-refresh and subsequent Power Ups */ +#define ANOMALY_05000168 (__SILICON_REVISION__ < 5) +/* DATA CPLB page miss can result in lost write-through cache data writes */ +#define ANOMALY_05000169 (__SILICON_REVISION__ < 5) +/* Boot-ROM code modifies SICA_IWRx wakeup registers */ +#define ANOMALY_05000171 (__SILICON_REVISION__ < 5) +/* DSPID register values incorrect */ +#define ANOMALY_05000172 (__SILICON_REVISION__ < 3) +/* DMA vs Core accesses to external memory */ +#define ANOMALY_05000173 (__SILICON_REVISION__ < 3) +/* Cache Fill Buffer Data lost */ +#define ANOMALY_05000174 (__SILICON_REVISION__ < 5) +/* Overlapping Sequencer and Memory Stalls */ +#define ANOMALY_05000175 (__SILICON_REVISION__ < 5) +/* Multiplication of (-1) by (-1) followed by an accumulator saturation */ +#define ANOMALY_05000176 (__SILICON_REVISION__ < 5) +/* PPI_COUNT Cannot Be Programmed to 0 in General Purpose TX or RX Modes */ +#define ANOMALY_05000179 (__SILICON_REVISION__ < 5) +/* PPI_DELAY Not Functional in PPI Modes with 0 Frame Syncs */ +#define ANOMALY_05000180 (1) +/* Disabling the PPI resets the PPI configuration registers */ +#define ANOMALY_05000181 (__SILICON_REVISION__ < 5) +/* IMDMA does not operate to full speed for 600MHz and higher devices */ +#define ANOMALY_05000182 (1) +/* Timer Pin limitations for PPI TX Modes with External Frame Syncs */ +#define ANOMALY_05000184 (__SILICON_REVISION__ < 5) +/* PPI TX Mode with 2 External Frame Syncs */ +#define ANOMALY_05000185 (__SILICON_REVISION__ < 5) +/* PPI packing with Data Length greater than 8 bits (not a meaningful mode) */ +#define ANOMALY_05000186 (__SILICON_REVISION__ < 5) +/* IMDMA Corrupted Data after a Halt */ +#define ANOMALY_05000187 (1) +/* IMDMA Restrictions on Descriptor and Buffer Placement in Memory */ +#define ANOMALY_05000188 (__SILICON_REVISION__ < 5) +/* False Protection Exceptions */ +#define ANOMALY_05000189 (__SILICON_REVISION__ < 5) +/* PPI not functional at core voltage < 1Volt */ +#define ANOMALY_05000190 (1) +/* PPI does not invert the Driving PPICLK edge in Transmit Modes */ +#define ANOMALY_05000191 (__SILICON_REVISION__ < 3) +/* False I/O Pin Interrupts on Edge-Sensitive Inputs When Polarity Setting Is Changed */ +#define ANOMALY_05000193 (__SILICON_REVISION__ < 5) +/* Restarting SPORT in Specific Modes May Cause Data Corruption */ +#define ANOMALY_05000194 (__SILICON_REVISION__ < 5) +/* Failing MMR Accesses When Stalled by Preceding Memory Read */ +#define ANOMALY_05000198 (__SILICON_REVISION__ < 5) +/* Current DMA Address Shows Wrong Value During Carry Fix */ +#define ANOMALY_05000199 (__SILICON_REVISION__ < 5) +/* SPORT TFS and DT Are Incorrectly Driven During Inactive Channels in Certain Conditions */ +#define ANOMALY_05000200 (__SILICON_REVISION__ < 5) +/* Possible Infinite Stall with Specific Dual-DAG Situation */ +#define ANOMALY_05000202 (__SILICON_REVISION__ < 5) +/* Incorrect data read with write-through cache and allocate cache lines on reads only mode */ +#define ANOMALY_05000204 (__SILICON_REVISION__ < 5) +/* Specific sequence that can cause DMA error or DMA stopping */ +#define ANOMALY_05000205 (__SILICON_REVISION__ < 5) +/* Recovery from "Brown-Out" Condition */ +#define ANOMALY_05000207 (__SILICON_REVISION__ < 5) +/* VSTAT Status Bit in PLL_STAT Register Is Not Functional */ +#define ANOMALY_05000208 (1) +/* Speed Path in Computational Unit Affects Certain Instructions */ +#define ANOMALY_05000209 (__SILICON_REVISION__ < 5) +/* UART TX Interrupt Masked Erroneously */ +#define ANOMALY_05000215 (__SILICON_REVISION__ < 5) +/* NMI Event at Boot Time Results in Unpredictable State */ +#define ANOMALY_05000219 (__SILICON_REVISION__ < 5) +/* Data Corruption with Cached External Memory and Non-Cached On-Chip L2 Memory */ +#define ANOMALY_05000220 (__SILICON_REVISION__ < 5) +/* Incorrect Pulse-Width of UART Start Bit */ +#define ANOMALY_05000225 (__SILICON_REVISION__ < 5) +/* Scratchpad Memory Bank Reads May Return Incorrect Data */ +#define ANOMALY_05000227 (__SILICON_REVISION__ < 5) +/* UART Receiver is Less Robust Against Baudrate Differences in Certain Conditions */ +#define ANOMALY_05000230 (__SILICON_REVISION__ < 5) +/* UART STB Bit Incorrectly Affects Receiver Setting */ +#define ANOMALY_05000231 (__SILICON_REVISION__ < 5) +/* SPORT data transmit lines are incorrectly driven in multichannel mode */ +#define ANOMALY_05000232 (__SILICON_REVISION__ < 5) +/* DF Bit in PLL_CTL Register Does Not Respond to Hardware Reset */ +#define ANOMALY_05000242 (__SILICON_REVISION__ < 5) +/* If I-Cache Is On, CSYNC/SSYNC/IDLE Around Change of Control Causes Failures */ +#define ANOMALY_05000244 (__SILICON_REVISION__ < 5) +/* Spurious Hardware Error from an Access in the Shadow of a Conditional Branch */ +#define ANOMALY_05000245 (__SILICON_REVISION__ < 5) +/* TESTSET operation forces stall on the other core */ +#define ANOMALY_05000248 (__SILICON_REVISION__ < 5) +/* Incorrect Bit Shift of Data Word in Multichannel (TDM) Mode in Certain Conditions */ +#define ANOMALY_05000250 (__SILICON_REVISION__ > 2 && __SILICON_REVISION__ < 5) +/* Exception Not Generated for MMR Accesses in Reserved Region */ +#define ANOMALY_05000251 (__SILICON_REVISION__ < 5) +/* Maximum External Clock Speed for Timers */ +#define ANOMALY_05000253 (__SILICON_REVISION__ < 5) +/* Incorrect Timer Pulse Width in Single-Shot PWM_OUT Mode with External Clock */ +#define ANOMALY_05000254 (__SILICON_REVISION__ > 3) +/* Interrupt/Exception During Short Hardware Loop May Cause Bad Instruction Fetches */ +#define ANOMALY_05000257 (__SILICON_REVISION__ < 5) +/* Instruction Cache Is Corrupted When Bits 9 and 12 of the ICPLB Data Registers Differ */ +#define ANOMALY_05000258 (__SILICON_REVISION__ < 5) +/* ICPLB_STATUS MMR Register May Be Corrupted */ +#define ANOMALY_05000260 (__SILICON_REVISION__ < 5) +/* DCPLB_FAULT_ADDR MMR Register May Be Corrupted */ +#define ANOMALY_05000261 (__SILICON_REVISION__ < 5) +/* Stores To Data Cache May Be Lost */ +#define ANOMALY_05000262 (__SILICON_REVISION__ < 5) +/* Hardware Loop Corrupted When Taking an ICPLB Exception */ +#define ANOMALY_05000263 (__SILICON_REVISION__ < 5) +/* CSYNC/SSYNC/IDLE Causes Infinite Stall in Penultimate Instruction in Hardware Loop */ +#define ANOMALY_05000264 (__SILICON_REVISION__ < 5) +/* Sensitivity To Noise with Slow Input Edge Rates on External SPORT TX and RX Clocks */ +#define ANOMALY_05000265 (__SILICON_REVISION__ < 5) +/* IMDMA destination IRQ status must be read prior to using IMDMA */ +#define ANOMALY_05000266 (__SILICON_REVISION__ > 3) +/* IMDMA may corrupt data under certain conditions */ +#define ANOMALY_05000267 (1) +/* High I/O Activity Causes Output Voltage of Internal Voltage Regulator (Vddint) to Increase */ +#define ANOMALY_05000269 (1) +/* High I/O Activity Causes Output Voltage of Internal Voltage Regulator (Vddint) to Decrease */ +#define ANOMALY_05000270 (1) +/* Certain Data Cache Writethrough Modes Fail for Vddint <= 0.9V */ +#define ANOMALY_05000272 (1) +/* Data cache write back to external synchronous memory may be lost */ +#define ANOMALY_05000274 (1) +/* PPI Timing and Sampling Information Updates */ +#define ANOMALY_05000275 (__SILICON_REVISION__ > 2) +/* Timing Requirements Change for External Frame Sync PPI Modes with Non-Zero PPI_DELAY */ +#define ANOMALY_05000276 (__SILICON_REVISION__ < 5) +/* Disabling Peripherals with DMA Running May Cause DMA System Instability */ +#define ANOMALY_05000278 (__SILICON_REVISION__ < 5) +/* False Hardware Error Exception When ISR Context Is Not Restored */ +#define ANOMALY_05000281 (__SILICON_REVISION__ < 5) +/* System MMR Write Is Stalled Indefinitely When Killed in a Particular Stage */ +#define ANOMALY_05000283 (1) +/* A read will receive incorrect data under certain conditions */ +#define ANOMALY_05000287 (__SILICON_REVISION__ < 5) +/* SPORTs May Receive Bad Data If FIFOs Fill Up */ +#define ANOMALY_05000288 (__SILICON_REVISION__ < 5) +/* Memory-To-Memory DMA Source/Destination Descriptors Must Be in Same Memory Space */ +#define ANOMALY_05000301 (1) +/* SSYNCs After Writes To DMA MMR Registers May Not Be Handled Correctly */ +#define ANOMALY_05000302 (1) +/* New Feature: Additional Hysteresis on SPORT Input Pins (Not Available On Older Silicon) */ +#define ANOMALY_05000305 (__SILICON_REVISION__ < 5) +/* SCKELOW Bit Does Not Maintain State Through Hibernate */ +#define ANOMALY_05000307 (__SILICON_REVISION__ < 5) +/* False Hardware Errors Caused by Fetches at the Boundary of Reserved Memory */ +#define ANOMALY_05000310 (1) +/* Errors When SSYNC, CSYNC, or Loads to LT, LB and LC Registers Are Interrupted */ +#define ANOMALY_05000312 (1) +/* PPI Is Level-Sensitive on First Transfer */ +#define ANOMALY_05000313 (1) +/* Killed System MMR Write Completes Erroneously On Next System MMR Access */ +#define ANOMALY_05000315 (1) +/* PF2 Output Remains Asserted After SPI Master Boot */ +#define ANOMALY_05000320 (__SILICON_REVISION__ > 3) +/* Erroneous GPIO Flag Pin Operations Under Specific Sequences */ +#define ANOMALY_05000323 (1) +/* SPORT Secondary Receive Channel Not Functional When Word Length Exceeds 16 Bits */ +#define ANOMALY_05000326 (__SILICON_REVISION__ > 3) +/* New Feature: 24-Bit SPI Boot Mode Support (Not Available On Older Silicon) */ +#define ANOMALY_05000331 (__SILICON_REVISION__ < 5) +/* New Feature: Slave SPI Boot Mode Supported (Not Available On Older Silicon) */ +#define ANOMALY_05000332 (__SILICON_REVISION__ < 5) +/* Flag Data Register Writes One SCLK Cycle After Edge Is Detected May Clear Interrupt Status */ +#define ANOMALY_05000333 (__SILICON_REVISION__ < 5) -#endif /* (defined(CONFIG_BF_REV_0_5) || defined(CONFIG_BF_REV_0_3)) */ +/* Anomalies that don't exist on this proc */ +#define ANOMALY_05000183 (0) +#define ANOMALY_05000273 (0) +#define ANOMALY_05000311 (0) -#if (defined(CONFIG_BF_REV_0_5)) -#define ANOMALY_05000254 /* Incorrect Timer Pulse Width in Single-Shot PWM_OUT - * mode with external clock */ -#define ANOMALY_05000266 /* IMDMA destination IRQ status must be read prior to - * using IMDMA */ #endif - -#if (defined(CONFIG_BF_REV_0_3)) -#define ANOMALY_05000156 /* Timers in PWM-Out Mode with PPI GP Receive (Input) - * Mode with 0 Frame Syncs */ -#define ANOMALY_05000168 /* SDRAM auto-refresh and subsequent Power Ups */ -#define ANOMALY_05000169 /* DATA CPLB page miss can result in lost write-through - * cache data writes */ -#define ANOMALY_05000171 /* Boot-ROM code modifies SICA_IWRx wakeup registers */ -#define ANOMALY_05000174 /* Cache Fill Buffer Data lost */ -#define ANOMALY_05000175 /* Overlapping Sequencer and Memory Stalls */ -#define ANOMALY_05000176 /* Multiplication of (-1) by (-1) followed by an - * accumulator saturation */ -#define ANOMALY_05000179 /* PPI_COUNT cannot be programmed to 0 in General - * Purpose TX or RX modes */ -#define ANOMALY_05000181 /* Disabling the PPI resets the PPI configuration - * registers */ -#define ANOMALY_05000184 /* Timer Pin limitations for PPI TX Modes with - * External Frame Syncs */ -#define ANOMALY_05000185 /* PPI TX Mode with 2 External Frame Syncs */ -#define ANOMALY_05000186 /* PPI packing with Data Length greater than 8 bits - * (not a meaningful mode) */ -#define ANOMALY_05000188 /* IMDMA Restrictions on Descriptor and Buffer - * Placement in Memory */ -#define ANOMALY_05000189 /* False Protection Exception */ -#define ANOMALY_05000193 /* False Flag Pin Interrupts on Edge Sensitive Inputs - * when polarity setting is changed */ -#define ANOMALY_05000194 /* Restarting SPORT in specific modes may cause data - * corruption */ -#define ANOMALY_05000198 /* Failing MMR accesses when stalled by preceding - * memory read */ -#define ANOMALY_05000199 /* DMA current address shows wrong value during carry - * fix */ -#define ANOMALY_05000200 /* SPORT TFS and DT are incorrectly driven during - * inactive channels in certain conditions */ -#define ANOMALY_05000202 /* Possible infinite stall with specific dual-DAG - * situation */ -#define ANOMALY_05000204 /* Incorrect data read with write-through cache and - * allocate cache lines on reads only mode */ -#define ANOMALY_05000205 /* Specific sequence that can cause DMA error or DMA - * stopping */ -#define ANOMALY_05000207 /* Recovery from "brown-out" condition */ -#define ANOMALY_05000209 /* Speed-Path in computational unit affects certain - * instructions */ -#define ANOMALY_05000215 /* UART TX Interrupt masked erroneously */ -#define ANOMALY_05000219 /* NMI event at boot time results in unpredictable - * state */ -#define ANOMALY_05000220 /* Data Corruption with Cached External Memory and - * Non-Cached On-Chip L2 Memory */ -#define ANOMALY_05000225 /* Incorrect pulse-width of UART start-bit */ -#define ANOMALY_05000227 /* Scratchpad memory bank reads may return incorrect - * data */ -#define ANOMALY_05000230 /* UART Receiver is less robust against Baudrate - * Differences in certain Conditions */ -#define ANOMALY_05000231 /* UART STB bit incorrectly affects receiver setting */ -#define ANOMALY_05000232 /* SPORT data transmit lines are incorrectly driven in - * multichannel mode */ -#define ANOMALY_05000242 /* DF bit in PLL_CTL register does not respond to - * hardware reset */ -#define ANOMALY_05000244 /* If i-cache is on, CSYNC/SSYNC/IDLE around Change of - * Control causes failures */ -#define ANOMALY_05000248 /* TESTSET operation forces stall on the other core */ -#define ANOMALY_05000250 /* Incorrect Bit-Shift of Data Word in Multichannel - * (TDM) mode in certain conditions */ -#define ANOMALY_05000251 /* Exception not generated for MMR accesses in - * reserved region */ -#define ANOMALY_05000253 /* Maximum external clock speed for Timers */ -#define ANOMALY_05000258 /* Instruction Cache is corrupted when bits 9 and 12 - * of the ICPLB Data registers differ */ -#define ANOMALY_05000260 /* ICPLB_STATUS MMR register may be corrupted */ -#define ANOMALY_05000261 /* DCPLB_FAULT_ADDR MMR register may be corrupted */ -#define ANOMALY_05000262 /* Stores to data cache may be lost */ -#define ANOMALY_05000263 /* Hardware loop corrupted when taking an ICPLB - * exception */ -#define ANOMALY_05000264 /* CSYNC/SSYNC/IDLE causes infinite stall in second - * to last instruction in hardware loop */ -#define ANOMALY_05000276 /* Timing requirements change for External Frame - * Sync PPI Modes with non-zero PPI_DELAY */ -#define ANOMALY_05000278 /* Disabling Peripherals with DMA running may cause - * DMA system instability */ -#define ANOMALY_05000281 /* False Hardware Error Exception when ISR context is - * not restored */ -#define ANOMALY_05000283 /* An MMR write is stalled indefinitely when killed - * in a particular stage */ -#define ANOMALY_05000287 /* A read will receive incorrect data under certain - * conditions */ -#define ANOMALY_05000288 /* SPORTs may receive bad data if FIFOs fill up */ -#endif - -#endif /* _MACH_ANOMALY_H_ */ diff --git a/include/asm-blackfin/mach-bf561/bf561.h b/include/asm-blackfin/mach-bf561/bf561.h index 96a5d3a47e4..8cc2e0033e0 100644 --- a/include/asm-blackfin/mach-bf561/bf561.h +++ b/include/asm-blackfin/mach-bf561/bf561.h @@ -311,7 +311,7 @@ #define CONFIG_CCLK_ACT_DIV CONFIG_CCLK_DIV_not_defined_properly #endif -#if defined(ANOMALY_05000273) && (CONFIG_CCLK_DIV == 1) +#if ANOMALY_05000273 && (CONFIG_CCLK_DIV == 1) #error ANOMALY 05000273, please make sure CCLK is at least 2x SCLK #endif diff --git a/include/asm-blackfin/mach-common/cdef_LPBlackfin.h b/include/asm-blackfin/mach-common/cdef_LPBlackfin.h index 94ed381e560..ede210eca4e 100644 --- a/include/asm-blackfin/mach-common/cdef_LPBlackfin.h +++ b/include/asm-blackfin/mach-common/cdef_LPBlackfin.h @@ -39,7 +39,7 @@ #define bfin_read_SRAM_BASE_ADDRESS() bfin_read32(SRAM_BASE_ADDRESS) #define bfin_write_SRAM_BASE_ADDRESS(val) bfin_write32(SRAM_BASE_ADDRESS,val) #define bfin_read_DMEM_CONTROL() bfin_read32(DMEM_CONTROL) -#ifdef ANOMALY_05000125 +#if ANOMALY_05000125 extern void bfin_write_DMEM_CONTROL(unsigned int val); #else #define bfin_write_DMEM_CONTROL(val) bfin_write32(DMEM_CONTROL,val) @@ -129,7 +129,7 @@ extern void bfin_write_DMEM_CONTROL(unsigned int val); #define DTEST_DATA3 0xFFE0040C */ #define bfin_read_IMEM_CONTROL() bfin_read32(IMEM_CONTROL) -#ifdef ANOMALY_05000125 +#if ANOMALY_05000125 extern void bfin_write_IMEM_CONTROL(unsigned int val); #else #define bfin_write_IMEM_CONTROL(val) bfin_write32(IMEM_CONTROL,val) diff --git a/include/asm-blackfin/mach-common/def_LPBlackfin.h b/include/asm-blackfin/mach-common/def_LPBlackfin.h index be1ece8c0c2..260515d1528 100644 --- a/include/asm-blackfin/mach-common/def_LPBlackfin.h +++ b/include/asm-blackfin/mach-common/def_LPBlackfin.h @@ -33,81 +33,77 @@ #include -/*#if !defined(__ADSPLPBLACKFIN__) -#warning def_LPBlackfin.h should only be included for 532 compatible chips. -#endif -*/ - #define MK_BMSK_(x) (1< +#if ANOMALY_05000198 +# define NOP_PAD_ANOMALY_05000198 "nop;" #else - -#define bfin_read8(addr) ({ unsigned char __v; \ - __asm__ __volatile__ ( \ - "%0 = b[%1] (z);\n\t" \ - :"=d"(__v) : "a"(addr)); \ - __v; }) - -#define bfin_read16(addr) ({ unsigned __v; \ - __asm__ __volatile__ (\ - "%0 = w[%1] (z);\n\t"\ - : "=d"(__v) : "a"(addr)); (unsigned short)__v; }) - -#define bfin_read32(addr) ({ unsigned __v; \ - __asm__ __volatile__ (\ - "%0 = [%1];\n\t"\ - : "=d"(__v) : "a"(addr)); __v; }) - -#define bfin_write8(addr, val) ({ \ - __asm__ __volatile__ ( \ - "b[%0] = %1; \n\t" \ - ::"a"(addr), "d"(val) : "memory");}) - -#define bfin_write16(addr,val) ({\ - __asm__ __volatile__ (\ - "w[%0] = %1;\n\t"\ - : : "a"(addr) , "d"(val) : "memory");}) - -#define bfin_write32(addr,val) ({\ - __asm__ __volatile__ (\ - "[%0] = %1;\n\t"\ - : : "a"(addr) , "d"(val) : "memory");}) - +# define NOP_PAD_ANOMALY_05000198 #endif +#define bfin_read8(addr) ({ \ + uint8_t __v; \ + __asm__ __volatile__( \ + NOP_PAD_ANOMALY_05000198 \ + "%0 = b[%1] (z);" \ + : "=d" (__v) \ + : "a" (addr) \ + ); \ + __v; }) + +#define bfin_read16(addr) ({ \ + uint16_t __v; \ + __asm__ __volatile__( \ + NOP_PAD_ANOMALY_05000198 \ + "%0 = w[%1] (z);" \ + : "=d" (__v) \ + : "a" (addr) \ + ); \ + __v; }) + +#define bfin_read32(addr) ({ \ + uint32_t __v; \ + __asm__ __volatile__( \ + NOP_PAD_ANOMALY_05000198 \ + "%0 = [%1];" \ + : "=d" (__v) \ + : "a" (addr) \ + ); \ + __v; }) + +#define bfin_write8(addr, val) \ + __asm__ __volatile__( \ + NOP_PAD_ANOMALY_05000198 \ + "b[%0] = %1;" \ + : \ + : "a" (addr), "d" (val) \ + : "memory" \ + ) + +#define bfin_write16(addr, val) \ + __asm__ __volatile__( \ + NOP_PAD_ANOMALY_05000198 \ + "w[%0] = %1;" \ + : \ + : "a" (addr), "d" (val) \ + : "memory" \ + ) + +#define bfin_write32(addr, val) \ + __asm__ __volatile__( \ + NOP_PAD_ANOMALY_05000198 \ + "[%0] = %1;" \ + : \ + : "a" (addr), "d" (val) \ + : "memory" \ + ) + +#endif /* __ASSEMBLY__ */ + /************************************************** * System Register Bits **************************************************/ diff --git a/include/asm-blackfin/system.h b/include/asm-blackfin/system.h index 5e5f1a0566c..b03cf7d5b9a 100644 --- a/include/asm-blackfin/system.h +++ b/include/asm-blackfin/system.h @@ -36,6 +36,7 @@ #include #include +#include /* * Interrupt configuring macros. @@ -43,53 +44,60 @@ extern unsigned long irq_flags; -#define local_irq_enable() do { \ - __asm__ __volatile__ ( \ - "sti %0;" \ - ::"d"(irq_flags)); \ -} while (0) +#define local_irq_enable() \ + __asm__ __volatile__( \ + "sti %0;" \ + : \ + : "d" (irq_flags) \ + ) -#define local_irq_disable() do { \ - int _tmp_dummy; \ - __asm__ __volatile__ ( \ - "cli %0;" \ - :"=d" (_tmp_dummy):); \ -} while (0) +#define local_irq_disable() \ + do { \ + int __tmp_dummy; \ + __asm__ __volatile__( \ + "cli %0;" \ + : "=d" (__tmp_dummy) \ + ); \ + } while (0) -#if defined(ANOMALY_05000244) && defined (CONFIG_BLKFIN_CACHE) -#define idle_with_irq_disabled() do { \ - __asm__ __volatile__ ( \ - "nop; nop;\n" \ - ".align 8;\n" \ - "sti %0; idle;\n" \ - ::"d" (irq_flags)); \ -} while (0) +#if ANOMALY_05000244 && defined(CONFIG_BLKFIN_CACHE) +# define NOP_PAD_ANOMALY_05000244 "nop; nop;" #else -#define idle_with_irq_disabled() do { \ - __asm__ __volatile__ ( \ - ".align 8;\n" \ - "sti %0; idle;\n" \ - ::"d" (irq_flags)); \ -} while (0) +# define NOP_PAD_ANOMALY_05000244 #endif +#define idle_with_irq_disabled() \ + __asm__ __volatile__( \ + NOP_PAD_ANOMALY_05000244 \ + ".align 8;" \ + "sti %0;" \ + "idle;" \ + : \ + : "d" (irq_flags) \ + ) + #ifdef CONFIG_DEBUG_HWERR -#define __save_and_cli(x) do { \ - __asm__ __volatile__ ( \ - "cli %0;\n\tsti %1;" \ - :"=&d"(x): "d" (0x3F)); \ -} while (0) +# define __save_and_cli(x) \ + __asm__ __volatile__( \ + "cli %0;" \ + "sti %1;" \ + : "=&d" (x) \ + : "d" (0x3F) \ + ) #else -#define __save_and_cli(x) do { \ - __asm__ __volatile__ ( \ - "cli %0;" \ - :"=&d"(x):); \ -} while (0) +# define __save_and_cli(x) \ + __asm__ __volatile__( \ + "cli %0;" \ + : "=&d" (x) \ + ) #endif -#define local_save_flags(x) asm volatile ("cli %0;" \ - "sti %0;" \ - :"=d"(x):); +#define local_save_flags(x) \ + __asm__ __volatile__( \ + "cli %0;" \ + "sti %0;" \ + : "=d" (x) \ + ) #ifdef CONFIG_DEBUG_HWERR #define irqs_enabled_from_flags(x) (((x) & ~0x3f) != 0) @@ -97,10 +105,11 @@ extern unsigned long irq_flags; #define irqs_enabled_from_flags(x) ((x) != 0x1f) #endif -#define local_irq_restore(x) do { \ - if (irqs_enabled_from_flags(x)) \ - local_irq_enable (); \ -} while (0) +#define local_irq_restore(x) \ + do { \ + if (irqs_enabled_from_flags(x)) \ + local_irq_enable(); \ + } while (0) /* For spinlocks etc */ #define local_irq_save(x) __save_and_cli(x) -- cgit v1.2.3-70-g09d2 From d5148ffa600e6a655b458bedc593020e0574f967 Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Wed, 25 Jul 2007 11:57:42 +0800 Subject: Blackfin arch: use the [CS]SYNC() macros which include anomaly workarounds rather than __builtin_bfin_[cs]sync() Signed-off-by: Mike Frysinger Signed-off-by: Bryan Wu --- arch/blackfin/oprofile/op_blackfin.h | 8 ++++---- drivers/serial/bfin_5xx.c | 14 +++++++------- include/asm-blackfin/mach-bf533/cdefBF532.h | 2 +- include/asm-blackfin/mach-bf537/cdefBF534.h | 2 +- include/asm-blackfin/mach-bf548/cdefBF54x_base.h | 2 +- include/asm-blackfin/mach-bf561/cdefBF561.h | 2 +- 6 files changed, 15 insertions(+), 15 deletions(-) (limited to 'arch') diff --git a/arch/blackfin/oprofile/op_blackfin.h b/arch/blackfin/oprofile/op_blackfin.h index f88f446c814..05dd08c9d15 100644 --- a/arch/blackfin/oprofile/op_blackfin.h +++ b/arch/blackfin/oprofile/op_blackfin.h @@ -68,7 +68,7 @@ static inline unsigned int ctr_read(void) unsigned int tmp; tmp = bfin_read_PFCTL(); - __builtin_bfin_csync(); + CSYNC(); return tmp; } @@ -76,21 +76,21 @@ static inline unsigned int ctr_read(void) static inline void ctr_write(unsigned int val) { bfin_write_PFCTL(val); - __builtin_bfin_csync(); + CSYNC(); } static inline void count_read(unsigned int *count) { count[0] = bfin_read_PFCNTR0(); count[1] = bfin_read_PFCNTR1(); - __builtin_bfin_csync(); + CSYNC(); } static inline void count_write(unsigned int *count) { bfin_write_PFCNTR0(count[0]); bfin_write_PFCNTR1(count[1]); - __builtin_bfin_csync(); + CSYNC(); } extern int pm_overflow_handler(int irq, struct pt_regs *regs); diff --git a/drivers/serial/bfin_5xx.c b/drivers/serial/bfin_5xx.c index 66c92bc36f3..1e79ee605d9 100644 --- a/drivers/serial/bfin_5xx.c +++ b/drivers/serial/bfin_5xx.c @@ -173,12 +173,12 @@ void kgdb_put_debug_char(int chr) uart = &bfin_serial_ports[CONFIG_KGDB_UART_PORT]; while (!(UART_GET_LSR(uart) & THRE)) { - __builtin_bfin_ssync(); + SSYNC(); } UART_PUT_LCR(uart, UART_GET_LCR(uart)&(~DLAB)); - __builtin_bfin_ssync(); + SSYNC(); UART_PUT_CHAR(uart, (unsigned char)chr); - __builtin_bfin_ssync(); + SSYNC(); } int kgdb_get_debug_char(void) @@ -192,12 +192,12 @@ int kgdb_get_debug_char(void) uart = &bfin_serial_ports[CONFIG_KGDB_UART_PORT]; while(!(UART_GET_LSR(uart) & DR)) { - __builtin_bfin_ssync(); + SSYNC(); } UART_PUT_LCR(uart, UART_GET_LCR(uart)&(~DLAB)); - __builtin_bfin_ssync(); + SSYNC(); chr = UART_GET_CHAR(uart); - __builtin_bfin_ssync(); + SSYNC(); return chr; } @@ -1203,7 +1203,7 @@ static int __init bfin_serial_init(void) IRQF_DISABLED, "BFIN_UART_RX", uart); pr_info("Request irq for kgdb uart port\n"); UART_PUT_IER(uart, UART_GET_IER(uart) | ERBFI); - __builtin_bfin_ssync(); + SSYNC(); t.c_cflag = CS8|B57600; t.c_iflag = 0; t.c_oflag = 0; diff --git a/include/asm-blackfin/mach-bf533/cdefBF532.h b/include/asm-blackfin/mach-bf533/cdefBF532.h index 74f967b235e..67a6dc49c52 100644 --- a/include/asm-blackfin/mach-bf533/cdefBF532.h +++ b/include/asm-blackfin/mach-bf533/cdefBF532.h @@ -65,7 +65,7 @@ static __inline__ void bfin_write_VR_CTL(unsigned int val) bfin_write32(SIC_IWR, IWR_ENABLE(0)); bfin_write16(VR_CTL, val); - __builtin_bfin_ssync(); + SSYNC(); local_irq_save(flags); asm("IDLE;"); diff --git a/include/asm-blackfin/mach-bf537/cdefBF534.h b/include/asm-blackfin/mach-bf537/cdefBF534.h index 84e58fa73dc..5dab41fb9c7 100644 --- a/include/asm-blackfin/mach-bf537/cdefBF534.h +++ b/include/asm-blackfin/mach-bf537/cdefBF534.h @@ -57,7 +57,7 @@ static __inline__ void bfin_write_VR_CTL(unsigned int val) bfin_write32(SIC_IWR, IWR_ENABLE(0)); bfin_write16(VR_CTL, val); - __builtin_bfin_ssync(); + SSYNC(); local_irq_save(flags); asm("IDLE;"); diff --git a/include/asm-blackfin/mach-bf548/cdefBF54x_base.h b/include/asm-blackfin/mach-bf548/cdefBF54x_base.h index cdf29e75ea5..10475bbfc7d 100644 --- a/include/asm-blackfin/mach-bf548/cdefBF54x_base.h +++ b/include/asm-blackfin/mach-bf548/cdefBF54x_base.h @@ -60,7 +60,7 @@ static __inline__ void bfin_write_VR_CTL(unsigned int val) bfin_write32(SIC_IWR2, 0); bfin_write16(VR_CTL, val); - __builtin_bfin_ssync(); + SSYNC(); local_irq_save(flags); asm("IDLE;"); diff --git a/include/asm-blackfin/mach-bf561/cdefBF561.h b/include/asm-blackfin/mach-bf561/cdefBF561.h index 73d4d65249c..2efcd2c663a 100644 --- a/include/asm-blackfin/mach-bf561/cdefBF561.h +++ b/include/asm-blackfin/mach-bf561/cdefBF561.h @@ -67,7 +67,7 @@ static __inline__ void bfin_write_VR_CTL(unsigned int val) bfin_write32(SICA_IWR1, 0); bfin_write16(VR_CTL, val); - __builtin_bfin_ssync(); + SSYNC(); local_irq_save(flags); asm("IDLE;"); -- cgit v1.2.3-70-g09d2 From e208f83a7aa4ebf6c0a68e814903e8aa33f9439a Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Wed, 25 Jul 2007 10:11:42 +0800 Subject: Blackfin arch: use HI/LO macros rather than masking the bit ranges ourselves Signed-off-by: Mike Frysinger Signed-off-by: Bryan Wu --- arch/blackfin/mach-bf533/head.S | 12 ++++---- arch/blackfin/mach-bf537/head.S | 12 ++++---- arch/blackfin/mach-bf548/head.S | 12 ++++---- arch/blackfin/mach-bf561/head.S | 12 ++++---- arch/blackfin/mach-common/cache.S | 8 +++--- arch/blackfin/mach-common/cacheinit.S | 4 +-- arch/blackfin/mach-common/cplbmgr.S | 52 +++++++++++++++++------------------ arch/blackfin/mach-common/dpmc.S | 52 +++++++++++++++++------------------ arch/blackfin/mach-common/lock.S | 20 +++++++------- 9 files changed, 92 insertions(+), 92 deletions(-) (limited to 'arch') diff --git a/arch/blackfin/mach-bf533/head.S b/arch/blackfin/mach-bf533/head.S index 5aeffd06fe7..69da0e8b773 100644 --- a/arch/blackfin/mach-bf533/head.S +++ b/arch/blackfin/mach-bf533/head.S @@ -144,8 +144,8 @@ ENTRY(__start) ssync; /* Turn off the icache */ - p0.l = (IMEM_CONTROL & 0xFFFF); - p0.h = (IMEM_CONTROL >> 16); + p0.l = LO(IMEM_CONTROL); + p0.h = HI(IMEM_CONTROL); R1 = [p0]; R0 = ~ENICPLB; R0 = R0 & R1; @@ -162,8 +162,8 @@ ENTRY(__start) #endif /* Turn off the dcache */ - p0.l = (DMEM_CONTROL & 0xFFFF); - p0.h = (DMEM_CONTROL >> 16); + p0.l = LO(DMEM_CONTROL); + p0.h = HI(DMEM_CONTROL); R1 = [p0]; R0 = ~ENDCPLB; R0 = R0 & R1; @@ -417,8 +417,8 @@ ENTRY(_start_dma_code) w[p0] = r0.l; ssync; - p0.l = (EBIU_SDBCTL & 0xFFFF); - p0.h = (EBIU_SDBCTL >> 16); /* SDRAM Memory Bank Control Register */ + p0.l = LO(EBIU_SDBCTL); + p0.h = HI(EBIU_SDBCTL); /* SDRAM Memory Bank Control Register */ r0 = mem_SDBCTL; w[p0] = r0.l; ssync; diff --git a/arch/blackfin/mach-bf537/head.S b/arch/blackfin/mach-bf537/head.S index d9b411adf6a..b1d4b91b7ae 100644 --- a/arch/blackfin/mach-bf537/head.S +++ b/arch/blackfin/mach-bf537/head.S @@ -100,8 +100,8 @@ ENTRY(__start) R0 = R1; /* Turn off the icache */ - p0.l = (IMEM_CONTROL & 0xFFFF); - p0.h = (IMEM_CONTROL >> 16); + p0.l = LO(IMEM_CONTROL); + p0.h = HI(IMEM_CONTROL); R1 = [p0]; R0 = ~ENICPLB; R0 = R0 & R1; @@ -118,8 +118,8 @@ ENTRY(__start) #endif /* Turn off the dcache */ - p0.l = (DMEM_CONTROL & 0xFFFF); - p0.h = (DMEM_CONTROL >> 16); + p0.l = LO(DMEM_CONTROL); + p0.h = HI(DMEM_CONTROL); R1 = [p0]; R0 = ~ENDCPLB; R0 = R0 & R1; @@ -436,8 +436,8 @@ ENTRY(_start_dma_code) w[p0] = r0.l; ssync; - p0.l = (EBIU_SDBCTL & 0xFFFF); - p0.h = (EBIU_SDBCTL >> 16); /* SDRAM Memory Bank Control Register */ + p0.l = LO(EBIU_SDBCTL); + p0.h = HI(EBIU_SDBCTL); /* SDRAM Memory Bank Control Register */ r0 = mem_SDBCTL; w[p0] = r0.l; ssync; diff --git a/arch/blackfin/mach-bf548/head.S b/arch/blackfin/mach-bf548/head.S index e5e56df3bf4..47cd91777a3 100644 --- a/arch/blackfin/mach-bf548/head.S +++ b/arch/blackfin/mach-bf548/head.S @@ -97,8 +97,8 @@ ENTRY(__stext) R0 = R1; /* Turn off the icache */ - p0.l = (IMEM_CONTROL & 0xFFFF); - p0.h = (IMEM_CONTROL >> 16); + p0.l = LO(IMEM_CONTROL); + p0.h = HI(IMEM_CONTROL); R1 = [p0]; R0 = ~ENICPLB; R0 = R0 & R1; @@ -106,8 +106,8 @@ ENTRY(__stext) SSYNC; /* Turn off the dcache */ - p0.l = (DMEM_CONTROL & 0xFFFF); - p0.h = (DMEM_CONTROL >> 16); + p0.l = LO(DMEM_CONTROL); + p0.h = HI(DMEM_CONTROL); R1 = [p0]; R0 = ~ENDCPLB; R0 = R0 & R1; @@ -335,8 +335,8 @@ ENTRY(_start_dma_code) w[p0] = r0.l; ssync; - p0.l = (EBIU_SDBCTL & 0xFFFF); - p0.h = (EBIU_SDBCTL >> 16); /* SDRAM Memory Bank Control Register */ + p0.l = LO(EBIU_SDBCTL); + p0.h = HI(EBIU_SDBCTL); /* SDRAM Memory Bank Control Register */ r0 = mem_SDBCTL; w[p0] = r0.l; ssync; diff --git a/arch/blackfin/mach-bf561/head.S b/arch/blackfin/mach-bf561/head.S index b1d0e54a97a..173893429b0 100644 --- a/arch/blackfin/mach-bf561/head.S +++ b/arch/blackfin/mach-bf561/head.S @@ -100,8 +100,8 @@ ENTRY(__start) R0 = R1; /* Turn off the icache */ - p0.l = (IMEM_CONTROL & 0xFFFF); - p0.h = (IMEM_CONTROL >> 16); + p0.l = LO(IMEM_CONTROL); + p0.h = HI(IMEM_CONTROL); R1 = [p0]; R0 = ~ENICPLB; R0 = R0 & R1; @@ -117,8 +117,8 @@ ENTRY(__start) #endif /* Turn off the dcache */ - p0.l = (DMEM_CONTROL & 0xFFFF); - p0.h = (DMEM_CONTROL >> 16); + p0.l = LO(DMEM_CONTROL); + p0.h = HI(DMEM_CONTROL); R1 = [p0]; R0 = ~ENDCPLB; R0 = R0 & R1; @@ -371,8 +371,8 @@ ENTRY(_start_dma_code) w[p0] = r0.l; ssync; - p0.l = (EBIU_SDBCTL & 0xFFFF); - p0.h = (EBIU_SDBCTL >> 16); /* SDRAM Memory Bank Control Register */ + p0.l = LO(EBIU_SDBCTL); + p0.h = HI(EBIU_SDBCTL); /* SDRAM Memory Bank Control Register */ r0 = mem_SDBCTL; w[p0] = r0.l; ssync; diff --git a/arch/blackfin/mach-common/cache.S b/arch/blackfin/mach-common/cache.S index 7063795eb7c..0521b158820 100644 --- a/arch/blackfin/mach-common/cache.S +++ b/arch/blackfin/mach-common/cache.S @@ -79,8 +79,8 @@ ENTRY(_icache_invalidate) ENTRY(_invalidate_entire_icache) [--SP] = ( R7:5); - P0.L = (IMEM_CONTROL & 0xFFFF); - P0.H = (IMEM_CONTROL >> 16); + P0.L = LO(IMEM_CONTROL); + P0.H = HI(IMEM_CONTROL); R7 = [P0]; /* Clear the IMC bit , All valid bits in the instruction @@ -197,8 +197,8 @@ ENTRY(_invalidate_entire_dcache) ENTRY(_dcache_invalidate) [--SP] = ( R7:6); - P0.L = (DMEM_CONTROL & 0xFFFF); - P0.H = (DMEM_CONTROL >> 16); + P0.L = LO(DMEM_CONTROL); + P0.H = HI(DMEM_CONTROL); R7 = [P0]; /* Clear the DMC[1:0] bits, All valid bits in the data diff --git a/arch/blackfin/mach-common/cacheinit.S b/arch/blackfin/mach-common/cacheinit.S index 05c0c77510b..afa0adfac6c 100644 --- a/arch/blackfin/mach-common/cacheinit.S +++ b/arch/blackfin/mach-common/cacheinit.S @@ -43,8 +43,8 @@ ENTRY(_bfin_write_IMEM_CONTROL) /* Enable Instruction Cache */ - P0.l = (IMEM_CONTROL & 0xFFFF); - P0.h = (IMEM_CONTROL >> 16); + P0.l = LO(IMEM_CONTROL); + P0.h = HI(IMEM_CONTROL); /* Anomaly 05000125 */ CLI R1; diff --git a/arch/blackfin/mach-common/cplbmgr.S b/arch/blackfin/mach-common/cplbmgr.S index 6c256baf087..cef94c13f95 100644 --- a/arch/blackfin/mach-common/cplbmgr.S +++ b/arch/blackfin/mach-common/cplbmgr.S @@ -75,15 +75,15 @@ ENTRY(_cplb_mgr) * from the configuration table. */ - P4.L = (ICPLB_FAULT_ADDR & 0xFFFF); - P4.H = (ICPLB_FAULT_ADDR >> 16); + P4.L = LO(ICPLB_FAULT_ADDR); + P4.H = HI(ICPLB_FAULT_ADDR); P1 = 16; P5.L = _page_size_table; P5.H = _page_size_table; - P0.L = (ICPLB_DATA0 & 0xFFFF); - P0.H = (ICPLB_DATA0 >> 16); + P0.L = LO(ICPLB_DATA0); + P0.H = HI(ICPLB_DATA0); R4 = [P4]; /* Get faulting address*/ R6 = 64; /* Advance past the fault address, which*/ R6 = R6 + R4; /* we'll use if we find a match*/ @@ -117,13 +117,13 @@ ENTRY(_cplb_mgr) I0 = R4; /* Fault address we'll search for*/ /* set up pointers */ - P0.L = (ICPLB_DATA0 & 0xFFFF); - P0.H = (ICPLB_DATA0 >> 16); + P0.L = LO(ICPLB_DATA0); + P0.H = HI(ICPLB_DATA0); /* The replacement procedure for ICPLBs */ - P4.L = (IMEM_CONTROL & 0xFFFF); - P4.H = (IMEM_CONTROL >> 16); + P4.L = LO(IMEM_CONTROL); + P4.H = HI(IMEM_CONTROL); /* disable cplbs */ R5 = [P4]; /* Control Register*/ @@ -243,8 +243,8 @@ ENTRY(_cplb_mgr) * last entry of the table. */ - P1.L = (ICPLB_DATA15 & 0xFFFF); /* ICPLB_DATA15 */ - P1.H = (ICPLB_DATA15 >> 16); + P1.L = LO(ICPLB_DATA15); /* ICPLB_DATA15 */ + P1.H = HI(ICPLB_DATA15); [P1] = R2; [P1-0x100] = R4; #ifdef CONFIG_CPLB_INFO @@ -292,10 +292,10 @@ ENTRY(_cplb_mgr) * pending writes associated with the CPLB. */ - P4.L = (DCPLB_STATUS & 0xFFFF); - P4.H = (DCPLB_STATUS >> 16); - P3.L = (DCPLB_DATA0 & 0xFFFF); - P3.H = (DCPLB_DATA0 >> 16); + P4.L = LO(DCPLB_STATUS); + P4.H = HI(DCPLB_STATUS); + P3.L = LO(DCPLB_DATA0); + P3.H = HI(DCPLB_DATA0); R5 = [P4]; /* A protection violation can be caused by more than just writes @@ -355,11 +355,11 @@ ENTRY(_cplb_mgr) * config table, that covers the faulting address. */ - P1.L = (DCPLB_DATA15 & 0xFFFF); - P1.H = (DCPLB_DATA15 >> 16); + P1.L = LO(DCPLB_DATA15); + P1.H = HI(DCPLB_DATA15); - P4.L = (DCPLB_FAULT_ADDR & 0xFFFF); - P4.H = (DCPLB_FAULT_ADDR >> 16); + P4.L = LO(DCPLB_FAULT_ADDR); + P4.H = HI(DCPLB_FAULT_ADDR); R4 = [P4]; I0 = R4; @@ -368,8 +368,8 @@ ENTRY(_cplb_mgr) R6 = R1; /* Save for later*/ /* Turn off CPLBs while we work.*/ - P4.L = (DMEM_CONTROL & 0xFFFF); - P4.H = (DMEM_CONTROL >> 16); + P4.L = LO(DMEM_CONTROL); + P4.H = HI(DMEM_CONTROL); R5 = [P4]; BITCLR(R5,ENDCPLB_P); CLI R0; @@ -384,8 +384,8 @@ ENTRY(_cplb_mgr) * are no good. */ - I1.L = (DCPLB_DATA0 & 0xFFFF); - I1.H = (DCPLB_DATA0 >> 16); + I1.L = LO(DCPLB_DATA0); + I1.H = HI(DCPLB_DATA0); P1 = 2; P2 = 16; I2.L = _dcplb_preference; @@ -475,8 +475,8 @@ ENTRY(_cplb_mgr) * one space closer to the start. */ - R1.L = (DCPLB_DATA16 & 0xFFFF); /* DCPLB_DATA15 + 4 */ - R1.H = (DCPLB_DATA16 >> 16); + R1.L = LO(DCPLB_DATA16); /* DCPLB_DATA15 + 4 */ + R1.H = HI(DCPLB_DATA16); R0 = P0; /* If the victim happens to be in DCPLB15, @@ -549,8 +549,8 @@ ENTRY(_cplb_mgr) * if necessary. */ - P1.L = (DCPLB_DATA15 & 0xFFFF); - P1.H = (DCPLB_DATA15 >> 16); + P1.L = LO(DCPLB_DATA15); + P1.H = HI(DCPLB_DATA15); /* If the DCPLB has cache bits set, but caching hasn't * been enabled, then we want to mask off the cache-in-L1 diff --git a/arch/blackfin/mach-common/dpmc.S b/arch/blackfin/mach-common/dpmc.S index 97cdcd6a00d..04194dca015 100644 --- a/arch/blackfin/mach-common/dpmc.S +++ b/arch/blackfin/mach-common/dpmc.S @@ -39,8 +39,8 @@ ENTRY(_unmask_wdog_wakeup_evt) P0.H = hi(SICA_IWR1); P0.L = lo(SICA_IWR1); #else - P0.h = (SIC_IWR >> 16); - P0.l = (SIC_IWR & 0xFFFF); + P0.h = HI(SIC_IWR); + P0.l = LO(SIC_IWR); #endif R7 = [P0]; #if defined(CONFIG_BF561) @@ -60,11 +60,11 @@ ENTRY(_unmask_wdog_wakeup_evt) */ R7 = 0x0000(z); #if defined(CONFIG_BF561) - P0.h = (WDOGA_STAT >> 16); - P0.l = (WDOGA_STAT & 0xFFFF); + P0.h = HI(WDOGA_STAT); + P0.l = LO(WDOGA_STAT); #else - P0.h = (WDOG_STAT >> 16); - P0.l = (WDOG_STAT & 0xFFFF); + P0.h = HI(WDOG_STAT); + P0.l = LO(WDOG_STAT); #endif [P0] = R7; SSYNC; @@ -73,21 +73,21 @@ ENTRY(_unmask_wdog_wakeup_evt) ENTRY(_program_wdog_timer) [--SP] = ( R7:0, P5:0 ); #if defined(CONFIG_BF561) - P0.h = (WDOGA_CNT >> 16); - P0.l = (WDOGA_CNT & 0xFFFF); + P0.h = HI(WDOGA_CNT); + P0.l = LO(WDOGA_CNT); #else - P0.h = (WDOG_CNT >> 16); - P0.l = (WDOG_CNT & 0xFFFF); + P0.h = HI(WDOG_CNT); + P0.l = LO(WDOG_CNT); #endif [P0] = R0; SSYNC; #if defined(CONFIG_BF561) - P0.h = (WDOGA_CTL >> 16); - P0.l = (WDOGA_CTL & 0xFFFF); + P0.h = HI(WDOGA_CTL); + P0.l = LO(WDOGA_CTL); #else - P0.h = (WDOG_CTL >> 16); - P0.l = (WDOG_CTL & 0xFFFF); + P0.h = HI(WDOG_CTL); + P0.l = LO(WDOG_CTL); #endif R7 = W[P0](Z); CC = BITTST(R7,1); @@ -97,11 +97,11 @@ ENTRY(_program_wdog_timer) .LSKIP_WRITE_TO_STAT: #if defined(CONFIG_BF561) - P0.h = (WDOGA_CTL >> 16); - P0.l = (WDOGA_CTL & 0xFFFF); + P0.h = HI(WDOGA_CTL); + P0.l = LO(WDOGA_CTL); #else - P0.h = (WDOG_CTL >> 16); - P0.l = (WDOG_CTL & 0xFFFF); + P0.h = HI(WDOG_CTL); + P0.l = LO(WDOG_CTL); #endif R7 = W[P0](Z); BITCLR(R7,1); /* Enable GP event */ @@ -122,11 +122,11 @@ ENTRY(_clear_wdog_wakeup_evt) [--SP] = ( R7:0, P5:0 ); #if defined(CONFIG_BF561) - P0.h = (WDOGA_CTL >> 16); - P0.l = (WDOGA_CTL & 0xFFFF); + P0.h = HI(WDOGA_CTL); + P0.l = LO(WDOGA_CTL); #else - P0.h = (WDOG_CTL >> 16); - P0.l = (WDOG_CTL & 0xFFFF); + P0.h = HI(WDOG_CTL); + P0.l = LO(WDOG_CTL); #endif R7 = 0x0AD6(Z); W[P0] = R7.L; @@ -149,11 +149,11 @@ ENTRY(_clear_wdog_wakeup_evt) ENTRY(_disable_wdog_timer) [--SP] = ( R7:0, P5:0 ); #if defined(CONFIG_BF561) - P0.h = (WDOGA_CTL >> 16); - P0.l = (WDOGA_CTL & 0xFFFF); + P0.h = HI(WDOGA_CTL); + P0.l = LO(WDOGA_CTL); #else - P0.h = (WDOG_CTL >> 16); - P0.l = (WDOG_CTL & 0xFFFF); + P0.h = HI(WDOG_CTL); + P0.l = LO(WDOG_CTL); #endif R7 = 0xAD6(Z); W[P0] = R7.L; diff --git a/arch/blackfin/mach-common/lock.S b/arch/blackfin/mach-common/lock.S index 386ac8dda07..190edb3cdc8 100644 --- a/arch/blackfin/mach-common/lock.S +++ b/arch/blackfin/mach-common/lock.S @@ -43,12 +43,12 @@ ENTRY(_cache_grab_lock) [--SP]=( R7:0,P5:0 ); - P1.H = (IMEM_CONTROL >> 16); - P1.L = (IMEM_CONTROL & 0xFFFF); - P5.H = (ICPLB_ADDR0 >> 16); - P5.L = (ICPLB_ADDR0 & 0xFFFF); - P4.H = (ICPLB_DATA0 >> 16); - P4.L = (ICPLB_DATA0 & 0xFFFF); + P1.H = HI(IMEM_CONTROL); + P1.L = LO(IMEM_CONTROL); + P5.H = HI(ICPLB_ADDR0); + P5.L = LO(ICPLB_ADDR0); + P4.H = HI(ICPLB_DATA0); + P4.L = LO(ICPLB_DATA0); R7 = R0; /* If the code of interest already resides in the cache @@ -167,8 +167,8 @@ ENTRY(_cache_lock) [--SP]=( R7:0,P5:0 ); - P1.H = (IMEM_CONTROL >> 16); - P1.L = (IMEM_CONTROL & 0xFFFF); + P1.H = HI(IMEM_CONTROL); + P1.L = LO(IMEM_CONTROL); /* Disable the Interrupts*/ CLI R3; @@ -195,8 +195,8 @@ ENDPROC(_cache_lock) */ ENTRY(_read_iloc) - P1.H = (IMEM_CONTROL >> 16); - P1.L = (IMEM_CONTROL & 0xFFFF); + P1.H = HI(IMEM_CONTROL); + P1.L = LO(IMEM_CONTROL); R1 = 0xF; R0 = [P1]; R0 = R0 >> 3; -- cgit v1.2.3-70-g09d2 From b2d1583f8e33c5472485fb99b29e065db373b675 Mon Sep 17 00:00:00 2001 From: Michael Hennerich Date: Tue, 24 Jul 2007 15:46:36 +0800 Subject: Blackfin arch: Advertise GENERIC_GPIO and remove duplicated GENERIC_CALIBRATE_DELAY Signed-off-by: Michael Hennerich Signed-off-by: Bryan Wu --- arch/blackfin/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig index 017defaa525..5c1e215c8b6 100644 --- a/arch/blackfin/Kconfig +++ b/arch/blackfin/Kconfig @@ -57,7 +57,7 @@ config GENERIC_TIME bool default n -config GENERIC_CALIBRATE_DELAY +config GENERIC_GPIO bool default y -- cgit v1.2.3-70-g09d2 From 40d63406a0dfc070fff9336c182619a0b167f165 Mon Sep 17 00:00:00 2001 From: Michael Hennerich Date: Wed, 10 Oct 2007 22:55:30 +0800 Subject: Blackfin arch: store labels so we later know who allocated GPIO/Peripheral resources Signed-off-by: Michael Hennerich Signed-off-by: Bryan Wu --- arch/blackfin/mach-bf548/gpio.c | 87 ++++++++++++++++++++++++++++------ include/asm-blackfin/mach-bf548/gpio.h | 5 -- 2 files changed, 72 insertions(+), 20 deletions(-) (limited to 'arch') diff --git a/arch/blackfin/mach-bf548/gpio.c b/arch/blackfin/mach-bf548/gpio.c index 0da5f0003b8..c073ab36066 100644 --- a/arch/blackfin/mach-bf548/gpio.c +++ b/arch/blackfin/mach-bf548/gpio.c @@ -49,6 +49,9 @@ static struct gpio_port_t *gpio_array[gpio_bank(MAX_BLACKFIN_GPIOS)] = { static unsigned short reserved_gpio_map[gpio_bank(MAX_BLACKFIN_GPIOS)]; static unsigned short reserved_peri_map[gpio_bank(MAX_BLACKFIN_GPIOS)]; +char *str_ident = NULL; + +#define RESOURCE_LABEL_SIZE 16 inline int check_gpio(unsigned short gpio) { @@ -70,7 +73,6 @@ inline void portmux_setup(unsigned short portno, unsigned short function) pmux |= (function & 0x3) << (2 * gpio_sub_n(portno)); gpio_array[gpio_bank(portno)]->port_mux = pmux; - } inline u16 get_portmux(unsigned short portno) @@ -80,16 +82,11 @@ inline u16 get_portmux(unsigned short portno) pmux = gpio_array[gpio_bank(portno)]->port_mux; return (pmux >> (2 * gpio_sub_n(portno)) & 0x3); - } static void port_setup(unsigned short gpio, unsigned short usage) { if (usage == GPIO_USAGE) { - if (gpio_array[gpio_bank(gpio)]->port_fer & gpio_bit(gpio)) - printk(KERN_WARNING - "bfin-gpio: Possible Conflict with Peripheral " - "usage and GPIO %d detected!\n", gpio); gpio_array[gpio_bank(gpio)]->port_fer &= ~gpio_bit(gpio); } else gpio_array[gpio_bank(gpio)]->port_fer |= gpio_bit(gpio); @@ -98,6 +95,11 @@ static void port_setup(unsigned short gpio, unsigned short usage) static int __init bfin_gpio_init(void) { + + str_ident = kzalloc(RESOURCE_LABEL_SIZE * 256, GFP_KERNEL); + if (!str_ident) + return -ENOMEM; + printk(KERN_INFO "Blackfin GPIO Controller\n"); return 0; @@ -105,11 +107,47 @@ static int __init bfin_gpio_init(void) arch_initcall(bfin_gpio_init); +static void set_label(unsigned short ident, const char *label) +{ + + if (label && str_ident) { + strncpy(str_ident + ident * RESOURCE_LABEL_SIZE, label, + RESOURCE_LABEL_SIZE); + str_ident[ident * RESOURCE_LABEL_SIZE + + RESOURCE_LABEL_SIZE - 1] = 0; + } +} + +static char *get_label(unsigned short ident) +{ + if (!str_ident) + return "UNKNOWN"; + + return (str_ident[ident * RESOURCE_LABEL_SIZE] ? + (str_ident + ident * RESOURCE_LABEL_SIZE) : "UNKNOWN"); +} + +static int cmp_label(unsigned short ident, const char *label) +{ + if (label && str_ident) + return strncmp(str_ident + ident * RESOURCE_LABEL_SIZE, + label, strlen(label)); + else + return -EINVAL; +} + int peripheral_request(unsigned short per, const char *label) { unsigned long flags; unsigned short ident = P_IDENT(per); + /* + * Don't cares are pins with only one dedicated function + */ + + if (per & P_DONTCARE) + return 0; + if (!(per & P_DEFINED)) return -ENODEV; @@ -120,8 +158,8 @@ int peripheral_request(unsigned short per, const char *label) if (unlikely(reserved_gpio_map[gpio_bank(ident)] & gpio_bit(ident))) { printk(KERN_ERR - "%s: Peripheral %d is already reserved as GPIO!\n", - __FUNCTION__, per); + "%s: Peripheral %d is already reserved as GPIO by %s !\n", + __FUNCTION__, ident, get_label(ident)); dump_stack(); local_irq_restore(flags); return -EBUSY; @@ -131,22 +169,38 @@ int peripheral_request(unsigned short per, const char *label) u16 funct = get_portmux(ident); + /* + * Pin functions like AMC address strobes my + * be requested and used by several drivers + */ + if (!((per & P_MAYSHARE) && (funct == P_FUNCT2MUX(per)))) { + + /* + * Allow that the identical pin function can + * be requested from the same driver twice + */ + + if (cmp_label(ident, label) == 0) + goto anyway; + printk(KERN_ERR - "%s: Peripheral %d is already reserved!\n", - __FUNCTION__, per); + "%s: Peripheral %d function %d is already reserved by %s !\n", + __FUNCTION__, ident, P_FUNCT2MUX(per), get_label(ident)); dump_stack(); local_irq_restore(flags); return -EBUSY; } } +anyway: reserved_peri_map[gpio_bank(ident)] |= gpio_bit(ident); portmux_setup(ident, P_FUNCT2MUX(per)); port_setup(ident, PERIPHERAL_USAGE); local_irq_restore(flags); + set_label(ident, label); return 0; } @@ -154,7 +208,6 @@ EXPORT_SYMBOL(peripheral_request); int peripheral_request_list(unsigned short per[], const char *label) { - u16 cnt; int ret; @@ -173,6 +226,9 @@ void peripheral_free(unsigned short per) unsigned long flags; unsigned short ident = P_IDENT(per); + if (per & P_DONTCARE) + return; + if (!(per & P_DEFINED)) return; @@ -182,8 +238,6 @@ void peripheral_free(unsigned short per) local_irq_save(flags); if (unlikely(!(reserved_peri_map[gpio_bank(ident)] & gpio_bit(ident)))) { - printk(KERN_ERR "bfin-gpio: Peripheral %d wasn't reserved!\n", per); - dump_stack(); local_irq_restore(flags); return; } @@ -234,7 +288,8 @@ int gpio_request(unsigned short gpio, const char *label) local_irq_save(flags); if (unlikely(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio))) { - printk(KERN_ERR "bfin-gpio: GPIO %d is already reserved!\n", gpio); + printk(KERN_ERR "bfin-gpio: GPIO %d is already reserved by %s !\n", + gpio, get_label(gpio)); dump_stack(); local_irq_restore(flags); return -EBUSY; @@ -242,7 +297,8 @@ int gpio_request(unsigned short gpio, const char *label) if (unlikely(reserved_peri_map[gpio_bank(gpio)] & gpio_bit(gpio))) { printk(KERN_ERR - "bfin-gpio: GPIO %d is already reserved as Peripheral!\n", gpio); + "bfin-gpio: GPIO %d is already reserved as Peripheral by %s !\n", + gpio, get_label(gpio)); dump_stack(); local_irq_restore(flags); return -EBUSY; @@ -253,6 +309,7 @@ int gpio_request(unsigned short gpio, const char *label) local_irq_restore(flags); port_setup(gpio, GPIO_USAGE); + set_label(gpio, label); return 0; } diff --git a/include/asm-blackfin/mach-bf548/gpio.h b/include/asm-blackfin/mach-bf548/gpio.h index dbf66bcabe3..cb8b0f15c9a 100644 --- a/include/asm-blackfin/mach-bf548/gpio.h +++ b/include/asm-blackfin/mach-bf548/gpio.h @@ -209,8 +209,3 @@ struct gpio_port_t { unsigned short dummy7; unsigned int port_mux; }; - -int gpio_request(unsigned short gpio, const char *label); -void peripheral_free(unsigned short per); -int peripheral_request_list(unsigned short per[], const char *label); -void peripheral_free_list(unsigned short per[]); -- cgit v1.2.3-70-g09d2 From 6782ea9ae8c2aa82dfeab84cb168126fbcbf4526 Mon Sep 17 00:00:00 2001 From: Michael Hennerich Date: Tue, 24 Jul 2007 15:16:59 +0800 Subject: Blackfin arch: Add label to call new GPIO API Signed-off-by: Michael Hennerich Signed-off-by: Bryan Wu --- arch/blackfin/mach-common/ints-priority-dc.c | 4 ++-- arch/blackfin/mach-common/ints-priority-sc.c | 8 ++++---- 2 files changed, 6 insertions(+), 6 deletions(-) (limited to 'arch') diff --git a/arch/blackfin/mach-common/ints-priority-dc.c b/arch/blackfin/mach-common/ints-priority-dc.c index 660f881b620..d5d9e57813d 100644 --- a/arch/blackfin/mach-common/ints-priority-dc.c +++ b/arch/blackfin/mach-common/ints-priority-dc.c @@ -221,7 +221,7 @@ static unsigned int bf561_gpio_irq_startup(unsigned int irq) if (!(gpio_enabled[gpio_bank(gpionr)] & gpio_bit(gpionr))) { - ret = gpio_request(gpionr, NULL); + ret = gpio_request(gpionr, "IRQ"); if (ret) return ret; @@ -261,7 +261,7 @@ static int bf561_gpio_irq_type(unsigned int irq, unsigned int type) if (!(gpio_enabled[gpio_bank(gpionr)] & gpio_bit(gpionr))) { - ret = gpio_request(gpionr, NULL); + ret = gpio_request(gpionr, "IRQ"); if (ret) return ret; diff --git a/arch/blackfin/mach-common/ints-priority-sc.c b/arch/blackfin/mach-common/ints-priority-sc.c index 4708023fe71..505b9484497 100644 --- a/arch/blackfin/mach-common/ints-priority-sc.c +++ b/arch/blackfin/mach-common/ints-priority-sc.c @@ -343,7 +343,7 @@ static unsigned int bfin_gpio_irq_startup(unsigned int irq) u16 gpionr = irq - IRQ_PF0; if (!(gpio_enabled[gpio_bank(gpionr)] & gpio_bit(gpionr))) { - ret = gpio_request(gpionr, NULL); + ret = gpio_request(gpionr, "IRQ"); if (ret) return ret; } @@ -377,7 +377,7 @@ static int bfin_gpio_irq_type(unsigned int irq, unsigned int type) if (type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_LEVEL_LOW)) { if (!(gpio_enabled[gpio_bank(gpionr)] & gpio_bit(gpionr))) { - ret = gpio_request(gpionr, NULL); + ret = gpio_request(gpionr, "IRQ"); if (ret) return ret; } @@ -587,7 +587,7 @@ static unsigned int bfin_gpio_irq_startup(unsigned int irq) } if (!(gpio_enabled[gpio_bank(gpionr)] & gpio_bit(gpionr))) { - ret = gpio_request(gpionr, NULL); + ret = gpio_request(gpionr, "IRQ"); if (ret) return ret; } @@ -627,7 +627,7 @@ static int bfin_gpio_irq_type(unsigned int irq, unsigned int type) if (type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_LEVEL_LOW)) { if (!(gpio_enabled[gpio_bank(gpionr)] & gpio_bit(gpionr))) { - ret = gpio_request(gpionr, NULL); + ret = gpio_request(gpionr, "IRQ"); if (ret) return ret; } -- cgit v1.2.3-70-g09d2 From 31430ba58a3c33cf32aa89117876f6e24f1b9a6e Mon Sep 17 00:00:00 2001 From: Michael Hennerich Date: Tue, 24 Jul 2007 16:27:25 +0800 Subject: Blackfin arch: Add PORT_J.High (needed for BF548-EZkit Touchscreen interrupts) - remove PORT_C.H Signed-off-by: Michael Hennerich Signed-off-by: Bryan Wu --- arch/blackfin/mach-bf548/Kconfig | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/blackfin/mach-bf548/Kconfig b/arch/blackfin/mach-bf548/Kconfig index e78b03d56c7..3976b7f523c 100644 --- a/arch/blackfin/mach-bf548/Kconfig +++ b/arch/blackfin/mach-bf548/Kconfig @@ -282,7 +282,7 @@ menu "Assignment" config PINTx_REASSIGN bool "Reprogram PINT Assignment" - default n + default y help The interrupt assignment registers controls the pin-to-interrupt assignment in a byte-wide manner. Each option allows you to select @@ -303,7 +303,7 @@ config PINT1_ASSIGN config PINT2_ASSIGN hex "PINT2_ASSIGN" depends on PINTx_REASSIGN - default 0x00000101 + default 0x07000101 config PINT3_ASSIGN hex "PINT3_ASSIGN" depends on PINTx_REASSIGN -- cgit v1.2.3-70-g09d2 From 314c98d589b9da40af42cfe7213eff04c74caea3 Mon Sep 17 00:00:00 2001 From: Michael Hennerich Date: Tue, 24 Jul 2007 18:03:45 +0800 Subject: Blackfin arch: add missing gpio error handling to make sure we roll back requests in case one fails Signed-off-by: Michael Hennerich Signed-off-by: Bryan Wu --- arch/blackfin/kernel/bfin_gpio.c | 10 ++++++++-- arch/blackfin/mach-bf548/gpio.c | 11 +++++++++-- 2 files changed, 17 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/blackfin/kernel/bfin_gpio.c b/arch/blackfin/kernel/bfin_gpio.c index b818a8da121..979cf79d379 100644 --- a/arch/blackfin/kernel/bfin_gpio.c +++ b/arch/blackfin/kernel/bfin_gpio.c @@ -711,9 +711,15 @@ int peripheral_request_list(unsigned short per[], const char *label) int ret; for (cnt = 0; per[cnt] != 0; cnt++) { + ret = peripheral_request(per[cnt], label); - if (ret < 0) - return ret; + + if (ret < 0) { + for ( ; cnt > 0; cnt--) { + peripheral_free(per[cnt - 1]); + } + return ret; + } } return 0; diff --git a/arch/blackfin/mach-bf548/gpio.c b/arch/blackfin/mach-bf548/gpio.c index c073ab36066..f3b9deacd33 100644 --- a/arch/blackfin/mach-bf548/gpio.c +++ b/arch/blackfin/mach-bf548/gpio.c @@ -212,11 +212,18 @@ int peripheral_request_list(unsigned short per[], const char *label) int ret; for (cnt = 0; per[cnt] != 0; cnt++) { + ret = peripheral_request(per[cnt], label); - if (ret < 0) - return ret; + + if (ret < 0) { + for ( ; cnt > 0; cnt--) { + peripheral_free(per[cnt - 1]); + } + return ret; + } } + return 0; } EXPORT_SYMBOL(peripheral_request_list); -- cgit v1.2.3-70-g09d2 From 8c61362377970cd35cc37960b5cbed03cecd57e7 Mon Sep 17 00:00:00 2001 From: Michael Hennerich Date: Fri, 3 Aug 2007 17:48:09 +0800 Subject: Blackfin arch: Some cosmetics based on LKML feedback from Joe Perches Signed-off-by: Michael Hennerich Cc: Joe Perches Signed-off-by: Bryan Wu --- arch/blackfin/kernel/bfin_gpio.c | 102 +++++++++++++++++++++++++-------------- arch/blackfin/mach-bf548/gpio.c | 25 ++++++---- 2 files changed, 81 insertions(+), 46 deletions(-) (limited to 'arch') diff --git a/arch/blackfin/kernel/bfin_gpio.c b/arch/blackfin/kernel/bfin_gpio.c index 979cf79d379..0182ce1fc4f 100644 --- a/arch/blackfin/kernel/bfin_gpio.c +++ b/arch/blackfin/kernel/bfin_gpio.c @@ -118,9 +118,14 @@ static struct gpio_port_t *gpio_bankb[gpio_bank(MAX_BLACKFIN_GPIOS)] = { static unsigned short reserved_gpio_map[gpio_bank(MAX_BLACKFIN_GPIOS)]; static unsigned short reserved_peri_map[gpio_bank(MAX_BLACKFIN_GPIOS + 16)]; -char *str_ident = NULL; -#define RESOURCE_LABEL_SIZE 16 +#define MAX_RESOURCES 256 +#define RESOURCE_LABEL_SIZE 16 + +struct str_ident { + char name[RESOURCE_LABEL_SIZE]; +} *str_ident; + #ifdef CONFIG_PM static unsigned short wakeup_map[gpio_bank(MAX_BLACKFIN_GPIOS)]; @@ -152,10 +157,9 @@ static void set_label(unsigned short ident, const char *label) { if (label && str_ident) { - strncpy(str_ident + ident * RESOURCE_LABEL_SIZE, label, + strncpy(str_ident[ident].name, label, RESOURCE_LABEL_SIZE); - str_ident[ident * RESOURCE_LABEL_SIZE + - RESOURCE_LABEL_SIZE - 1] = 0; + str_ident[ident].name[RESOURCE_LABEL_SIZE - 1] = 0; } } @@ -164,14 +168,13 @@ static char *get_label(unsigned short ident) if (!str_ident) return "UNKNOWN"; - return (str_ident[ident * RESOURCE_LABEL_SIZE] ? - (str_ident + ident * RESOURCE_LABEL_SIZE) : "UNKNOWN"); + return (*str_ident[ident].name ? str_ident[ident].name : "UNKNOWN"); } static int cmp_label(unsigned short ident, const char *label) { if (label && str_ident) - return strncmp(str_ident + ident * RESOURCE_LABEL_SIZE, + return strncmp(str_ident[ident].name, label, strlen(label)); else return -EINVAL; @@ -194,37 +197,63 @@ static void port_setup(unsigned short gpio, unsigned short usage) #ifdef BF537_FAMILY -#define PMUX_LUT_RES 0 -#define PMUX_LUT_OFFSET 1 -#define PMUX_LUT_ENTRIES 41 -#define PMUX_LUT_SIZE 2 - -static unsigned short port_mux_lut[PMUX_LUT_ENTRIES][PMUX_LUT_SIZE] = { - {P_PPI0_D13, 11}, {P_PPI0_D14, 11}, {P_PPI0_D15, 11}, - {P_SPORT1_TFS, 11}, {P_SPORT1_TSCLK, 11}, {P_SPORT1_DTPRI, 11}, - {P_PPI0_D10, 10}, {P_PPI0_D11, 10}, {P_PPI0_D12, 10}, - {P_SPORT1_RSCLK, 10}, {P_SPORT1_RFS, 10}, {P_SPORT1_DRPRI, 10}, - {P_PPI0_D8, 9}, {P_PPI0_D9, 9}, {P_SPORT1_DRSEC, 9}, - {P_SPORT1_DTSEC, 9}, {P_TMR2, 8}, {P_PPI0_FS3, 8}, {P_TMR3, 7}, - {P_SPI0_SSEL4, 7}, {P_TMR4, 6}, {P_SPI0_SSEL5, 6}, {P_TMR5, 5}, - {P_SPI0_SSEL6, 5}, {P_UART1_RX, 4}, {P_UART1_TX, 4}, {P_TMR6, 4}, - {P_TMR7, 4}, {P_UART0_RX, 3}, {P_UART0_TX, 3}, {P_DMAR0, 3}, - {P_DMAR1, 3}, {P_SPORT0_DTSEC, 1}, {P_SPORT0_DRSEC, 1}, - {P_CAN0_RX, 1}, {P_CAN0_TX, 1}, {P_SPI0_SSEL7, 1}, - {P_SPORT0_TFS, 0}, {P_SPORT0_DTPRI, 0}, {P_SPI0_SSEL2, 0}, - {P_SPI0_SSEL3, 0} +static struct { + unsigned short res; + unsigned short offset; +} port_mux_lut[] = { + {.res = P_PPI0_D13, .offset = 11}, + {.res = P_PPI0_D14, .offset = 11}, + {.res = P_PPI0_D15, .offset = 11}, + {.res = P_SPORT1_TFS, .offset = 11}, + {.res = P_SPORT1_TSCLK, .offset = 11}, + {.res = P_SPORT1_DTPRI, .offset = 11}, + {.res = P_PPI0_D10, .offset = 10}, + {.res = P_PPI0_D11, .offset = 10}, + {.res = P_PPI0_D12, .offset = 10}, + {.res = P_SPORT1_RSCLK, .offset = 10}, + {.res = P_SPORT1_RFS, .offset = 10}, + {.res = P_SPORT1_DRPRI, .offset = 10}, + {.res = P_PPI0_D8, .offset = 9}, + {.res = P_PPI0_D9, .offset = 9}, + {.res = P_SPORT1_DRSEC, .offset = 9}, + {.res = P_SPORT1_DTSEC, .offset = 9}, + {.res = P_TMR2, .offset = 8}, + {.res = P_PPI0_FS3, .offset = 8}, + {.res = P_TMR3, .offset = 7}, + {.res = P_SPI0_SSEL4, .offset = 7}, + {.res = P_TMR4, .offset = 6}, + {.res = P_SPI0_SSEL5, .offset = 6}, + {.res = P_TMR5, .offset = 5}, + {.res = P_SPI0_SSEL6, .offset = 5}, + {.res = P_UART1_RX, .offset = 4}, + {.res = P_UART1_TX, .offset = 4}, + {.res = P_TMR6, .offset = 4}, + {.res = P_TMR7, .offset = 4}, + {.res = P_UART0_RX, .offset = 3}, + {.res = P_UART0_TX, .offset = 3}, + {.res = P_DMAR0, .offset = 3}, + {.res = P_DMAR1, .offset = 3}, + {.res = P_SPORT0_DTSEC, .offset = 1}, + {.res = P_SPORT0_DRSEC, .offset = 1}, + {.res = P_CAN0_RX, .offset = 1}, + {.res = P_CAN0_TX, .offset = 1}, + {.res = P_SPI0_SSEL7, .offset = 1}, + {.res = P_SPORT0_TFS, .offset = 0}, + {.res = P_SPORT0_DTPRI, .offset = 0}, + {.res = P_SPI0_SSEL2, .offset = 0}, + {.res = P_SPI0_SSEL3, .offset = 0}, }; static void portmux_setup(unsigned short per, unsigned short function) { - u16 y, muxreg, offset; + u16 y, offset, muxreg; - for (y = 0; y < PMUX_LUT_ENTRIES; y++) { - if (port_mux_lut[y][PMUX_LUT_RES] == per) { + for (y = 0; y < ARRAY_SIZE(port_mux_lut); y++) { + if (port_mux_lut[y].res == per) { /* SET PORTMUX REG */ - offset = port_mux_lut[y][PMUX_LUT_OFFSET]; + offset = port_mux_lut[y].offset; muxreg = bfin_read_PORT_MUX(); if (offset != 1) { @@ -262,17 +291,18 @@ static void default_gpio(unsigned short gpio) static int __init bfin_gpio_init(void) { - - str_ident = kzalloc(RESOURCE_LABEL_SIZE * 256, GFP_KERNEL); - if (!str_ident) + str_ident = kcalloc(MAX_RESOURCES, + sizeof(struct str_ident), GFP_KERNEL); + if (str_ident == NULL) return -ENOMEM; + memset(str_ident, 0, MAX_RESOURCES * sizeof(struct str_ident)); + printk(KERN_INFO "Blackfin GPIO Controller\n"); return 0; } - arch_initcall(bfin_gpio_init); @@ -680,7 +710,7 @@ int peripheral_request(unsigned short per, const char *label) printk(KERN_ERR "%s: Peripheral %d function %d is already" - "reserved by %s !\n", + " reserved by %s !\n", __FUNCTION__, ident, P_FUNCT2MUX(per), get_label(ident)); dump_stack(); diff --git a/arch/blackfin/mach-bf548/gpio.c b/arch/blackfin/mach-bf548/gpio.c index f3b9deacd33..390dd8c1243 100644 --- a/arch/blackfin/mach-bf548/gpio.c +++ b/arch/blackfin/mach-bf548/gpio.c @@ -49,9 +49,13 @@ static struct gpio_port_t *gpio_array[gpio_bank(MAX_BLACKFIN_GPIOS)] = { static unsigned short reserved_gpio_map[gpio_bank(MAX_BLACKFIN_GPIOS)]; static unsigned short reserved_peri_map[gpio_bank(MAX_BLACKFIN_GPIOS)]; -char *str_ident = NULL; -#define RESOURCE_LABEL_SIZE 16 +#define MAX_RESOURCES 256 +#define RESOURCE_LABEL_SIZE 16 + +struct str_ident { + char name[RESOURCE_LABEL_SIZE]; +} *str_ident; inline int check_gpio(unsigned short gpio) { @@ -96,10 +100,13 @@ static void port_setup(unsigned short gpio, unsigned short usage) static int __init bfin_gpio_init(void) { - str_ident = kzalloc(RESOURCE_LABEL_SIZE * 256, GFP_KERNEL); - if (!str_ident) + str_ident = kcalloc(MAX_RESOURCES, + sizeof(struct str_ident), GFP_KERNEL); + if (str_ident == NULL) return -ENOMEM; + memset(str_ident, 0, MAX_RESOURCES * sizeof(struct str_ident)); + printk(KERN_INFO "Blackfin GPIO Controller\n"); return 0; @@ -111,10 +118,9 @@ static void set_label(unsigned short ident, const char *label) { if (label && str_ident) { - strncpy(str_ident + ident * RESOURCE_LABEL_SIZE, label, + strncpy(str_ident[ident].name, label, RESOURCE_LABEL_SIZE); - str_ident[ident * RESOURCE_LABEL_SIZE + - RESOURCE_LABEL_SIZE - 1] = 0; + str_ident[ident].name[RESOURCE_LABEL_SIZE - 1] = 0; } } @@ -123,14 +129,13 @@ static char *get_label(unsigned short ident) if (!str_ident) return "UNKNOWN"; - return (str_ident[ident * RESOURCE_LABEL_SIZE] ? - (str_ident + ident * RESOURCE_LABEL_SIZE) : "UNKNOWN"); + return (*str_ident[ident].name ? str_ident[ident].name : "UNKNOWN"); } static int cmp_label(unsigned short ident, const char *label) { if (label && str_ident) - return strncmp(str_ident + ident * RESOURCE_LABEL_SIZE, + return strncmp(str_ident[ident].name, label, strlen(label)); else return -EINVAL; -- cgit v1.2.3-70-g09d2 From f16295e7e7f2a2a15876f570f10d6dc8f1f36ab8 Mon Sep 17 00:00:00 2001 From: Robin Getz Date: Fri, 3 Aug 2007 18:07:17 +0800 Subject: Blackfin arch: Fix CCLK and SCLK checks Fix CCLK and SCLK checks, combine all arch checks into one file for maintance. Checkins that remove more lines than they add are always good. Signed-off-by: Robin Getz Signed-off-by: Bryan Wu --- arch/blackfin/Kconfig | 175 +++++++++++++++++++----------- arch/blackfin/mach-bf533/head.S | 1 + arch/blackfin/mach-bf537/head.S | 1 + arch/blackfin/mach-bf548/head.S | 1 + arch/blackfin/mach-bf561/head.S | 1 + arch/blackfin/mach-common/Makefile | 2 +- arch/blackfin/mach-common/arch_checks.c | 55 ++++++++++ arch/blackfin/mach-common/dpmc.S | 2 +- include/asm-blackfin/mach-bf533/bf533.h | 91 ---------------- include/asm-blackfin/mach-bf537/bf537.h | 91 ---------------- include/asm-blackfin/mach-bf548/bf548.h | 87 --------------- include/asm-blackfin/mach-bf561/bf561.h | 87 --------------- include/asm-blackfin/mach-common/clocks.h | 68 ++++++++++++ 13 files changed, 242 insertions(+), 420 deletions(-) create mode 100644 arch/blackfin/mach-common/arch_checks.c create mode 100644 include/asm-blackfin/mach-common/clocks.h (limited to 'arch') diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig index 5c1e215c8b6..9ce675e8026 100644 --- a/arch/blackfin/Kconfig +++ b/arch/blackfin/Kconfig @@ -323,7 +323,7 @@ config CMDLINE to the kernel, you may specify one here. As a minimum, you should specify the memory size and the root device (e.g., mem=8M, root=/dev/nfs). -comment "Board Setup" +comment "Clock/PLL Setup" config CLKIN_HZ int "Crystal Frequency in Hz" @@ -335,6 +335,118 @@ config CLKIN_HZ help The frequency of CLKIN crystal oscillator on the board in Hz. +config BFIN_KERNEL_CLOCK + bool "Re-program Clocks while Kernel boots?" + default n + help + This option decides if kernel clocks are re-programed from the + bootloader settings. If the clocks are not set, the SDRAM settings + are also not changed, and the Bootloader does 100% of the hardware + configuration. + +config PLL_BYPASS + bool "Bypass PLL" + depends on BFIN_KERNEL_CLOCK + default n + +config CLKIN_HALF + bool "Half Clock In" + depends on BFIN_KERNEL_CLOCK && (! PLL_BYPASS) + default n + help + If this is set the clock will be divided by 2, before it goes to the PLL. + +config VCO_MULT + int "VCO Multiplier" + depends on BFIN_KERNEL_CLOCK && (! PLL_BYPASS) + range 1 64 + default "22" if BFIN533_EZKIT + default "45" if BFIN533_STAMP + default "20" if BFIN537_STAMP + default "22" if BFIN533_BLUETECHNIX_CM + default "20" if BFIN537_BLUETECHNIX_CM + default "20" if BFIN561_BLUETECHNIX_CM + default "20" if BFIN561_EZKIT + help + This controls the frequency of the on-chip PLL. This can be between 1 and 64. + PLL Frequency = (Crystal Frequency) * (this setting) + +choice + prompt "Core Clock Divider" + depends on BFIN_KERNEL_CLOCK + default CCLK_DIV_1 + help + This sets the frequency of the core. It can be 1, 2, 4 or 8 + Core Frequency = (PLL frequency) / (this setting) + +config CCLK_DIV_1 + bool "1" + +config CCLK_DIV_2 + bool "2" + +config CCLK_DIV_4 + bool "4" + +config CCLK_DIV_8 + bool "8" +endchoice + +config SCLK_DIV + int "System Clock Divider" + depends on BFIN_KERNEL_CLOCK + range 1 15 + default 5 if BFIN533_EZKIT + default 5 if BFIN533_STAMP + default 4 if BFIN537_STAMP + default 5 if BFIN533_BLUETECHNIX_CM + default 4 if BFIN537_BLUETECHNIX_CM + default 4 if BFIN561_BLUETECHNIX_CM + default 5 if BFIN561_EZKIT + help + This sets the frequency of the system clock (including SDRAM or DDR). + This can be between 1 and 15 + System Clock = (PLL frequency) / (this setting) + +# +# Max & Min Speeds for various Chips +# +config MAX_VCO_HZ + int + default 600000000 if BF522 + default 600000000 if BF525 + default 600000000 if BF527 + default 400000000 if BF531 + default 400000000 if BF532 + default 750000000 if BF533 + default 500000000 if BF534 + default 400000000 if BF536 + default 600000000 if BF537 + default 533000000 if BF538 + default 533000000 if BF539 + default 600000000 if BF542 + default 533000000 if BF544 + default 533000000 if BF549 + default 600000000 if BF561 + +config MIN_VCO_HZ + int + default 50000000 + +config MAX_SCLK_HZ + int + default 133000000 + +config MIN_SCLK_HZ + int + default 27000000 + +comment "Kernel Timer/Scheduler" + +source kernel/Kconfig.hz + +comment "Memory Setup" + config MEM_SIZE int "SDRAM Memory Size in MBytes" default 32 if BFIN533_EZKIT @@ -448,10 +560,6 @@ endmenu menu "Blackfin Kernel Optimizations" -comment "Timer Tick" - -source kernel/Kconfig.hz - comment "Memory Optimizations" config I_ENTRY_L1 @@ -672,63 +780,6 @@ config L1_MAX_PIECE Set the max memory pieces for the L1 SRAM allocation algorithm. Min value is 16. Max value is 1024. -menu "Clock Settings" - - -config BFIN_KERNEL_CLOCK - bool "Re-program Clocks while Kernel boots?" - default n - help - This option decides if kernel clocks are re-programed from the - bootloader settings. If the clocks are not set, the SDRAM settings - are also not changed, and the Bootloader does 100% of the hardware - configuration. - -config VCO_MULT - int "VCO Multiplier" - depends on BFIN_KERNEL_CLOCK - default "22" if BFIN533_EZKIT - default "45" if BFIN533_STAMP - default "20" if BFIN537_STAMP - default "22" if BFIN533_BLUETECHNIX_CM - default "20" if BFIN537_BLUETECHNIX_CM - default "20" if BFIN561_BLUETECHNIX_CM - default "20" if BFIN561_EZKIT - -config CCLK_DIV - int "Core Clock Divider" - depends on BFIN_KERNEL_CLOCK - default 1 if BFIN533_EZKIT - default 1 if BFIN533_STAMP - default 1 if BFIN537_STAMP - default 1 if BFIN533_BLUETECHNIX_CM - default 1 if BFIN537_BLUETECHNIX_CM - default 1 if BFIN561_BLUETECHNIX_CM - default 1 if BFIN561_EZKIT - -config SCLK_DIV - int "System Clock Divider" - depends on BFIN_KERNEL_CLOCK - default 5 if BFIN533_EZKIT - default 5 if BFIN533_STAMP - default 4 if BFIN537_STAMP - default 5 if BFIN533_BLUETECHNIX_CM - default 4 if BFIN537_BLUETECHNIX_CM - default 4 if BFIN561_BLUETECHNIX_CM - default 5 if BFIN561_EZKIT - -config CLKIN_HALF - bool "Half ClockIn" - depends on BFIN_KERNEL_CLOCK - default n - -config PLL_BYPASS - bool "Bypass PLL" - depends on BFIN_KERNEL_CLOCK - default n - -endmenu - comment "Asynchonous Memory Configuration" menu "EBIU_AMBCTL Global Control" diff --git a/arch/blackfin/mach-bf533/head.S b/arch/blackfin/mach-bf533/head.S index 69da0e8b773..9c5378bb8a2 100644 --- a/arch/blackfin/mach-bf533/head.S +++ b/arch/blackfin/mach-bf533/head.S @@ -32,6 +32,7 @@ #include #include #if CONFIG_BFIN_KERNEL_CLOCK +#include #include #endif #if CONFIG_DEBUG_KERNEL_START diff --git a/arch/blackfin/mach-bf537/head.S b/arch/blackfin/mach-bf537/head.S index b1d4b91b7ae..82ea0470591 100644 --- a/arch/blackfin/mach-bf537/head.S +++ b/arch/blackfin/mach-bf537/head.S @@ -33,6 +33,7 @@ #include #if CONFIG_BFIN_KERNEL_CLOCK +#include #include #endif diff --git a/arch/blackfin/mach-bf548/head.S b/arch/blackfin/mach-bf548/head.S index 47cd91777a3..72087c2e6a8 100644 --- a/arch/blackfin/mach-bf548/head.S +++ b/arch/blackfin/mach-bf548/head.S @@ -31,6 +31,7 @@ #include #include #if CONFIG_BFIN_KERNEL_CLOCK +#include #include #endif diff --git a/arch/blackfin/mach-bf561/head.S b/arch/blackfin/mach-bf561/head.S index 173893429b0..83cd3f9bbf2 100644 --- a/arch/blackfin/mach-bf561/head.S +++ b/arch/blackfin/mach-bf561/head.S @@ -33,6 +33,7 @@ #include #if CONFIG_BFIN_KERNEL_CLOCK +#include #include #endif diff --git a/arch/blackfin/mach-common/Makefile b/arch/blackfin/mach-common/Makefile index 0279ede7039..4d7733dfd5d 100644 --- a/arch/blackfin/mach-common/Makefile +++ b/arch/blackfin/mach-common/Makefile @@ -4,7 +4,7 @@ obj-y := \ cache.o cacheinit.o cplbhdlr.o cplbmgr.o entry.o \ - interrupt.o lock.o irqpanic.o + interrupt.o lock.o irqpanic.o arch_checks.o obj-$(CONFIG_CPLB_INFO) += cplbinfo.o obj-$(CONFIG_BFIN_SINGLE_CORE) += ints-priority-sc.o diff --git a/arch/blackfin/mach-common/arch_checks.c b/arch/blackfin/mach-common/arch_checks.c new file mode 100644 index 00000000000..f9160d83b91 --- /dev/null +++ b/arch/blackfin/mach-common/arch_checks.c @@ -0,0 +1,55 @@ +/* + * File: arch/blackfin/mach-common/arch_checks.c + * Based on: + * Author: Robin Getz + * + * Created: 25Jul07 + * Description: Do some checking to make sure things are OK + * + * Modified: + * Copyright 2004-2007 Analog Devices Inc. + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see the file COPYING, or write + * to the Free Software Foundation, Inc., + * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include +#include + +#ifdef CONFIG_BFIN_KERNEL_CLOCK + +# if (CONFIG_VCO_HZ > CONFIG_MAX_VCO_HZ) +# error "VCO selected is more than maximum value. Please change the VCO multipler" +# endif + +# if (CONFIG_SCLK_HZ > CONFIG_MAX_SCLK_HZ) +# error "Sclk value selected is more than maximum. Please select a proper value for SCLK multiplier" +# endif + +# if (CONFIG_SCLK_HZ < CONFIG_MIN_SCLK_HZ) +# error "Sclk value selected is less than minimum. Please select a proper value for SCLK multiplier" +# endif + +# if (ANOMALY_05000273) && (CONFIG_SCLK_HZ * 2 > CONFIG_CCLK_HZ) +# error "ANOMALY 05000273, please make sure CCLK is at least 2x SCLK" +# endif + +# if (CONFIG_SCLK_HZ > CONFIG_CCLK_HZ) && (CONFIG_SCLK_HZ != CONFIG_CLKIN_HZ) && (CONFIG_CCLK_HZ != CONFIG_CLKIN_HZ) +# error "Please select sclk less than cclk" +# endif + +#endif /* CONFIG_BFIN_KERNEL_CLOCK */ diff --git a/arch/blackfin/mach-common/dpmc.S b/arch/blackfin/mach-common/dpmc.S index 04194dca015..39fbc286110 100644 --- a/arch/blackfin/mach-common/dpmc.S +++ b/arch/blackfin/mach-common/dpmc.S @@ -300,7 +300,7 @@ ENTRY(_sleep_deeper) P0.H = hi(PLL_CTL); P0.L = lo(PLL_CTL); R5 = W[P0](z); - R0.L = (MIN_VC/CONFIG_CLKIN_HZ) << 9; + R0.L = (CONFIG_MIN_VCO_HZ/CONFIG_CLKIN_HZ) << 9; W[P0] = R0.l; SSYNC; diff --git a/include/asm-blackfin/mach-bf533/bf533.h b/include/asm-blackfin/mach-bf533/bf533.h index 41e4e834e2d..cb210f6f768 100644 --- a/include/asm-blackfin/mach-bf533/bf533.h +++ b/include/asm-blackfin/mach-bf533/bf533.h @@ -141,97 +141,6 @@ #define AMGCTLVAL (V_AMBEN | V_AMCKEN | V_CDPRIO) -#define MAX_VC 650000000 -#define MIN_VC 50000000 - -#ifdef CONFIG_BFIN_KERNEL_CLOCK -/********************************PLL Settings **************************************/ -#if (CONFIG_VCO_MULT < 0) -#error "VCO Multiplier is less than 0. Please select a different value" -#endif - -#if (CONFIG_VCO_MULT == 0) -#error "VCO Multiplier should be greater than 0. Please select a different value" -#endif - -#if (CONFIG_VCO_MULT > 64) -#error "VCO Multiplier is more than 64. Please select a different value" -#endif - -#ifndef CONFIG_CLKIN_HALF -#define CONFIG_VCO_HZ (CONFIG_CLKIN_HZ * CONFIG_VCO_MULT) -#else -#define CONFIG_VCO_HZ ((CONFIG_CLKIN_HZ * CONFIG_VCO_MULT)/2) -#endif - -#ifndef CONFIG_PLL_BYPASS -#define CONFIG_CCLK_HZ (CONFIG_VCO_HZ/CONFIG_CCLK_DIV) -#define CONFIG_SCLK_HZ (CONFIG_VCO_HZ/CONFIG_SCLK_DIV) -#else -#define CONFIG_CCLK_HZ CONFIG_CLKIN_HZ -#define CONFIG_SCLK_HZ CONFIG_CLKIN_HZ -#endif - -#if (CONFIG_SCLK_DIV < 1) -#error "SCLK DIV cannot be less than 1 or more than 15. Please select a proper value" -#endif - -#if (CONFIG_SCLK_DIV > 15) -#error "SCLK DIV cannot be less than 1 or more than 15. Please select a proper value" -#endif - -#if (CONFIG_CCLK_DIV != 1) -#if (CONFIG_CCLK_DIV != 2) -#if (CONFIG_CCLK_DIV != 4) -#if (CONFIG_CCLK_DIV != 8) -#error "CCLK DIV can be 1,2,4 or 8 only. Please select a proper value" -#endif -#endif -#endif -#endif - -#if (CONFIG_VCO_HZ > MAX_VC) -#error "VCO selected is more than maximum value. Please change the VCO multipler" -#endif - -#if (CONFIG_SCLK_HZ > 133000000) -#error "Sclk value selected is more than maximum. Please select a proper value for SCLK multiplier" -#endif - -#if (CONFIG_SCLK_HZ < 27000000) -#error "Sclk value selected is less than minimum. Please select a proper value for SCLK multiplier" -#endif - -#if (CONFIG_SCLK_HZ > CONFIG_CCLK_HZ) -#if (CONFIG_SCLK_HZ != CONFIG_CLKIN_HZ) -#if (CONFIG_CCLK_HZ != CONFIG_CLKIN_HZ) -#error "Please select sclk less than cclk" -#endif -#endif -#endif - -#if (CONFIG_CCLK_DIV == 1) -#define CONFIG_CCLK_ACT_DIV CCLK_DIV1 -#endif -#if (CONFIG_CCLK_DIV == 2) -#define CONFIG_CCLK_ACT_DIV CCLK_DIV2 -#endif -#if (CONFIG_CCLK_DIV == 4) -#define CONFIG_CCLK_ACT_DIV CCLK_DIV4 -#endif -#if (CONFIG_CCLK_DIV == 8) -#define CONFIG_CCLK_ACT_DIV CCLK_DIV8 -#endif -#ifndef CONFIG_CCLK_ACT_DIV -#define CONFIG_CCLK_ACT_DIV CONFIG_CCLK_DIV_not_defined_properly -#endif - -#if ANOMALY_05000273 && (CONFIG_CCLK_DIV == 1) -#error ANOMALY 05000273, please make sure CCLK is at least 2x SCLK -#endif - -#endif /* CONFIG_BFIN_KERNEL_CLOCK */ - #ifdef CONFIG_BF533 #define CPU "BF533" #define CPUID 0x027a5000 diff --git a/include/asm-blackfin/mach-bf537/bf537.h b/include/asm-blackfin/mach-bf537/bf537.h index 04b08164e29..603823f51ca 100644 --- a/include/asm-blackfin/mach-bf537/bf537.h +++ b/include/asm-blackfin/mach-bf537/bf537.h @@ -121,97 +121,6 @@ #define AMGCTLVAL (V_AMBEN | V_AMCKEN | V_CDPRIO) -#define MAX_VC 650000000 -#define MIN_VC 50000000 - -/********************************PLL Settings **************************************/ -#ifdef CONFIG_BFIN_KERNEL_CLOCK -#if (CONFIG_VCO_MULT < 0) -#error "VCO Multiplier is less than 0. Please select a different value" -#endif - -#if (CONFIG_VCO_MULT == 0) -#error "VCO Multiplier should be greater than 0. Please select a different value" -#endif - -#if (CONFIG_VCO_MULT > 64) -#error "VCO Multiplier is more than 64. Please select a different value" -#endif - -#ifndef CONFIG_CLKIN_HALF -#define CONFIG_VCO_HZ (CONFIG_CLKIN_HZ * CONFIG_VCO_MULT) -#else -#define CONFIG_VCO_HZ ((CONFIG_CLKIN_HZ * CONFIG_VCO_MULT)/2) -#endif - -#ifndef CONFIG_PLL_BYPASS -#define CONFIG_CCLK_HZ (CONFIG_VCO_HZ/CONFIG_CCLK_DIV) -#define CONFIG_SCLK_HZ (CONFIG_VCO_HZ/CONFIG_SCLK_DIV) -#else -#define CONFIG_CCLK_HZ CONFIG_CLKIN_HZ -#define CONFIG_SCLK_HZ CONFIG_CLKIN_HZ -#endif - -#if (CONFIG_SCLK_DIV < 1) -#error "SCLK DIV cannot be less than 1 or more than 15. Please select a proper value" -#endif - -#if (CONFIG_SCLK_DIV > 15) -#error "SCLK DIV cannot be less than 1 or more than 15. Please select a proper value" -#endif - -#if (CONFIG_CCLK_DIV != 1) -#if (CONFIG_CCLK_DIV != 2) -#if (CONFIG_CCLK_DIV != 4) -#if (CONFIG_CCLK_DIV != 8) -#error "CCLK DIV can be 1,2,4 or 8 only. Please select a proper value" -#endif -#endif -#endif -#endif - -#if (CONFIG_VCO_HZ > MAX_VC) -#error "VCO selected is more than maximum value. Please change the VCO multipler" -#endif - -#if (CONFIG_SCLK_HZ > 133000000) -#error "Sclk value selected is more than maximum. Please select a proper value for SCLK multiplier" -#endif - -#if (CONFIG_SCLK_HZ < 27000000) -#error "Sclk value selected is less than minimum. Please select a proper value for SCLK multiplier" -#endif - -#if (CONFIG_SCLK_HZ >= CONFIG_CCLK_HZ) -#if (CONFIG_SCLK_HZ != CONFIG_CLKIN_HZ) -#if (CONFIG_CCLK_HZ != CONFIG_CLKIN_HZ) -#error "Please select sclk less than cclk" -#endif -#endif -#endif - -#if (CONFIG_CCLK_DIV == 1) -#define CONFIG_CCLK_ACT_DIV CCLK_DIV1 -#endif -#if (CONFIG_CCLK_DIV == 2) -#define CONFIG_CCLK_ACT_DIV CCLK_DIV2 -#endif -#if (CONFIG_CCLK_DIV == 4) -#define CONFIG_CCLK_ACT_DIV CCLK_DIV4 -#endif -#if (CONFIG_CCLK_DIV == 8) -#define CONFIG_CCLK_ACT_DIV CCLK_DIV8 -#endif -#ifndef CONFIG_CCLK_ACT_DIV -#define CONFIG_CCLK_ACT_DIV CONFIG_CCLK_DIV_not_defined_properly -#endif - -#if ANOMALY_05000273 && (CONFIG_CCLK_DIV == 1) -#error ANOMALY 05000273, please make sure CCLK is at least 2x SCLK -#endif - -#endif /* CONFIG_BFIN_KERNEL_CLOCK */ - #ifdef CONFIG_BF537 #define CPU "BF537" #define CPUID 0x027c8000 diff --git a/include/asm-blackfin/mach-bf548/bf548.h b/include/asm-blackfin/mach-bf548/bf548.h index 9498313a2cb..50306a84662 100644 --- a/include/asm-blackfin/mach-bf548/bf548.h +++ b/include/asm-blackfin/mach-bf548/bf548.h @@ -106,93 +106,6 @@ #define AMGCTLVAL (V_AMBEN | V_AMCKEN) -#define MAX_VC 650000000 -#define MIN_VC 50000000 - -/********************************PLL Settings **************************************/ -#ifdef CONFIG_BFIN_KERNEL_CLOCK -#if (CONFIG_VCO_MULT < 0) -#error "VCO Multiplier is less than 0. Please select a different value" -#endif - -#if (CONFIG_VCO_MULT == 0) -#error "VCO Multiplier should be greater than 0. Please select a different value" -#endif - -#if (CONFIG_VCO_MULT > 64) -#error "VCO Multiplier is more than 64. Please select a different value" -#endif - -#ifndef CONFIG_CLKIN_HALF -#define CONFIG_VCO_HZ (CONFIG_CLKIN_HZ * CONFIG_VCO_MULT) -#else -#define CONFIG_VCO_HZ ((CONFIG_CLKIN_HZ * CONFIG_VCO_MULT)/2) -#endif - -#ifndef CONFIG_PLL_BYPASS -#define CONFIG_CCLK_HZ (CONFIG_VCO_HZ/CONFIG_CCLK_DIV) -#define CONFIG_SCLK_HZ (CONFIG_VCO_HZ/CONFIG_SCLK_DIV) -#else -#define CONFIG_CCLK_HZ CONFIG_CLKIN_HZ -#define CONFIG_SCLK_HZ CONFIG_CLKIN_HZ -#endif - -#if (CONFIG_SCLK_DIV < 1) -#error "SCLK DIV cannot be less than 1 or more than 15. Please select a proper value" -#endif - -#if (CONFIG_SCLK_DIV > 15) -#error "SCLK DIV cannot be less than 1 or more than 15. Please select a proper value" -#endif - -#if (CONFIG_CCLK_DIV != 1) -#if (CONFIG_CCLK_DIV != 2) -#if (CONFIG_CCLK_DIV != 4) -#if (CONFIG_CCLK_DIV != 8) -#error "CCLK DIV can be 1,2,4 or 8 only. Please select a proper value" -#endif -#endif -#endif -#endif - -#if (CONFIG_VCO_HZ > MAX_VC) -#error "VCO selected is more than maximum value. Please change the VCO multipler" -#endif - -#if (CONFIG_SCLK_HZ > 133000000) -#error "Sclk value selected is more than maximum. Please select a proper value for SCLK multiplier" -#endif - -#if (CONFIG_SCLK_HZ < 27000000) -#error "Sclk value selected is less than minimum. Please select a proper value for SCLK multiplier" -#endif - -#if (CONFIG_SCLK_HZ >= CONFIG_CCLK_HZ) -#if (CONFIG_SCLK_HZ != CONFIG_CLKIN_HZ) -#if (CONFIG_CCLK_HZ != CONFIG_CLKIN_HZ) -#error "Please select sclk less than cclk" -#endif -#endif -#endif - -#if (CONFIG_CCLK_DIV == 1) -#define CONFIG_CCLK_ACT_DIV CCLK_DIV1 -#endif -#if (CONFIG_CCLK_DIV == 2) -#define CONFIG_CCLK_ACT_DIV CCLK_DIV2 -#endif -#if (CONFIG_CCLK_DIV == 4) -#define CONFIG_CCLK_ACT_DIV CCLK_DIV4 -#endif -#if (CONFIG_CCLK_DIV == 8) -#define CONFIG_CCLK_ACT_DIV CCLK_DIV8 -#endif -#ifndef CONFIG_CCLK_ACT_DIV -#define CONFIG_CCLK_ACT_DIV CONFIG_CCLK_DIV_not_defined_properly -#endif - -#endif /* CONFIG_BFIN_KERNEL_CLOCK */ - #ifdef CONFIG_BF542 #define CPU "BF542" #define CPUID 0x027c8000 diff --git a/include/asm-blackfin/mach-bf561/bf561.h b/include/asm-blackfin/mach-bf561/bf561.h index 8cc2e0033e0..53b650f3134 100644 --- a/include/asm-blackfin/mach-bf561/bf561.h +++ b/include/asm-blackfin/mach-bf561/bf561.h @@ -230,93 +230,6 @@ #define AMGCTLVAL (V_AMBEN | V_AMCKEN | V_CDPRIO | V_B0PEN | V_B1PEN | V_B2PEN | V_B3PEN | 0x0002) -#define MAX_VC 600000000 -#define MIN_VC 50000000 - -/******************************* PLL Settings ********************************/ -#ifdef CONFIG_BFIN_KERNEL_CLOCK -#if (CONFIG_VCO_MULT < 0) -#error "VCO Multiplier is less than 0. Please select a different value" -#endif - -#if (CONFIG_VCO_MULT == 0) -#error "VCO Multiplier should be greater than 0. Please select a different value" -#endif - -#ifndef CONFIG_CLKIN_HALF -#define CONFIG_VCO_HZ (CONFIG_CLKIN_HZ * CONFIG_VCO_MULT) -#else -#define CONFIG_VCO_HZ ((CONFIG_CLKIN_HZ * CONFIG_VCO_MULT)/2) -#endif - -#ifndef CONFIG_PLL_BYPASS -#define CONFIG_CCLK_HZ (CONFIG_VCO_HZ/CONFIG_CCLK_DIV) -#define CONFIG_SCLK_HZ (CONFIG_VCO_HZ/CONFIG_SCLK_DIV) -#else -#define CONFIG_CCLK_HZ CONFIG_CLKIN_HZ -#define CONFIG_SCLK_HZ CONFIG_CLKIN_HZ -#endif - -#if (CONFIG_SCLK_DIV < 1) -#error "SCLK DIV cannot be less than 1 or more than 15. Please select a proper value" -#endif - -#if (CONFIG_SCLK_DIV > 15) -#error "SCLK DIV cannot be less than 1 or more than 15. Please select a proper value" -#endif - -#if (CONFIG_CCLK_DIV != 1) -#if (CONFIG_CCLK_DIV != 2) -#if (CONFIG_CCLK_DIV != 4) -#if (CONFIG_CCLK_DIV != 8) -#error "CCLK DIV can be 1,2,4 or 8 only. Please select a proper value" -#endif -#endif -#endif -#endif - -#if (CONFIG_VCO_HZ > MAX_VC) -#error "VCO selected is more than maximum value. Please change the VCO multipler" -#endif - -#if (CONFIG_SCLK_HZ > 133000000) -#error "Sclk value selected is more than maximum. Please select a proper value for SCLK multiplier" -#endif - -#if (CONFIG_SCLK_HZ < 27000000) -#error "Sclk value selected is less than minimum. Please select a proper value for SCLK multiplier" -#endif - -#if (CONFIG_SCLK_HZ >= CONFIG_CCLK_HZ) -#if (CONFIG_SCLK_HZ != CONFIG_CLKIN_HZ) -#if (CONFIG_CCLK_HZ != CONFIG_CLKIN_HZ) -#error "Please select sclk less than cclk" -#endif -#endif -#endif - -#if (CONFIG_CCLK_DIV == 1) -#define CONFIG_CCLK_ACT_DIV CCLK_DIV1 -#endif -#if (CONFIG_CCLK_DIV == 2) -#define CONFIG_CCLK_ACT_DIV CCLK_DIV2 -#endif -#if (CONFIG_CCLK_DIV == 4) -#define CONFIG_CCLK_ACT_DIV CCLK_DIV4 -#endif -#if (CONFIG_CCLK_DIV == 8) -#define CONFIG_CCLK_ACT_DIV CCLK_DIV8 -#endif -#ifndef CONFIG_CCLK_ACT_DIV -#define CONFIG_CCLK_ACT_DIV CONFIG_CCLK_DIV_not_defined_properly -#endif - -#if ANOMALY_05000273 && (CONFIG_CCLK_DIV == 1) -#error ANOMALY 05000273, please make sure CCLK is at least 2x SCLK -#endif - -#endif /* CONFIG_BFIN_KERNEL_CLOCK */ - #ifdef CONFIG_BF561 #define CPU "BF561" #define CPUID 0x027bb000 diff --git a/include/asm-blackfin/mach-common/clocks.h b/include/asm-blackfin/mach-common/clocks.h new file mode 100644 index 00000000000..5e8113ee893 --- /dev/null +++ b/include/asm-blackfin/mach-common/clocks.h @@ -0,0 +1,68 @@ +/* + * File: include/asm-blackfin/mach-common/clocks.h + * Based on: include/asm-blackfin/mach-bf537/bf537.h + * Author: Robin Getz + * + * Created: 25Jul07 + * Description: Common Clock definitions for various kernel files + * + * Modified: + * Copyright 2004-2007 Analog Devices Inc. + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see the file COPYING, or write + * to the Free Software Foundation, Inc., + * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + + + +#ifdef CONFIG_CCLK_DIV_1 +# define CONFIG_CCLK_ACT_DIV CCLK_DIV1 +# define CONFIG_CCLK_DIV 1 +#endif + +#ifdef CONFIG_CCLK_DIV_2 +# define CONFIG_CCLK_ACT_DIV CCLK_DIV2 +# define CONFIG_CCLK_DIV 2 +#endif + +#ifdef CONFIG_CCLK_DIV_4 +# define CONFIG_CCLK_ACT_DIV CCLK_DIV4 +# define CONFIG_CCLK_DIV 4 +#endif + +#ifdef CONFIG_CCLK_DIV_8 +# define CONFIG_CCLK_ACT_DIV CCLK_DIV8 +# define CONFIG_CCLK_DIV 8 +#endif + +#ifndef CONFIG_PLL_BYPASS +# ifndef CONFIG_CLKIN_HALF +# define CONFIG_VCO_HZ (CONFIG_CLKIN_HZ * CONFIG_VCO_MULT) +# else +# define CONFIG_VCO_HZ ((CONFIG_CLKIN_HZ * CONFIG_VCO_MULT)/2) +# endif + +# define CONFIG_CCLK_HZ (CONFIG_VCO_HZ/CONFIG_CCLK_DIV) +# define CONFIG_SCLK_HZ (CONFIG_VCO_HZ/CONFIG_SCLK_DIV) + +#else +# define CONFIG_VCO_HZ (CONFIG_CLKIN_HZ) +# define CONFIG_CCLK_HZ (CONFIG_CLKIN_HZ) +# define CONFIG_SCLK_HZ (CONFIG_CLKIN_HZ) +# define CONFIG_VCO_MULT 0 +#endif + -- cgit v1.2.3-70-g09d2 From 518039bc24cbb9ce34665814fe120eac50bedd9a Mon Sep 17 00:00:00 2001 From: Robin Getz Date: Wed, 25 Jul 2007 11:03:28 +0800 Subject: Blackfin arch: Add ability to expend the hardware trace buffer Add ability to expend the hardware trace buffer via a configurable software buffer - so you can have lots of history when a crash occurs. The interesting way we do printk in the traps.c confusese the checking script Signed-off-by: Robin Getz Signed-off-by: Bryan Wu --- arch/blackfin/Kconfig | 81 +++++++++++++++++++++++++++++++++++++++ arch/blackfin/kernel/irqchip.c | 9 +++++ arch/blackfin/kernel/traps.c | 53 +++++++++++++++++++++---- arch/blackfin/mach-bf533/head.S | 2 +- arch/blackfin/mach-bf537/head.S | 2 +- arch/blackfin/mach-bf548/head.S | 2 +- arch/blackfin/mach-bf561/head.S | 2 +- arch/blackfin/mach-common/entry.S | 73 +++++++++++++++++++++++++++++++++++ include/asm-blackfin/trace.h | 55 +++++++++++++++++++++----- 9 files changed, 259 insertions(+), 20 deletions(-) (limited to 'arch') diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig index 9ce675e8026..a7a6e0c5827 100644 --- a/arch/blackfin/Kconfig +++ b/arch/blackfin/Kconfig @@ -1024,8 +1024,89 @@ config DEBUG_HUNT_FOR_ZERO Enabling this option will take up an extra entry in CPLB table. Otherwise, there is no extra overhead. +config DEBUG_BFIN_HWTRACE_ON + bool "Turn on Blackfin's Hardware Trace" + default y + help + All Blackfins include a Trace Unit which stores a history of the last + 16 changes in program flow taken by the program sequencer. The history + allows the user to recreate the program sequencer’s recent path. This + can be handy when an application dies - we print out the execution + path of how it got to the offending instruction. + + By turning this off, you may save a tiny amount of power. + +choice + prompt "Omit loop Tracing" + default DEBUG_BFIN_HWTRACE_COMPRESSION_OFF + depends on DEBUG_BFIN_HWTRACE_ON + help + The trace buffer can be configured to omit recording of changes in + program flow that match either the last entry or one of the last + two entries. Omitting one of these entries from the record prevents + the trace buffer from overflowing because of any sort of loop (for, do + while, etc) in the program. + + Because zero-overhead Hardware loops are not recorded in the trace buffer, + this feature can be used to prevent trace overflow from loops that + are nested four deep. + +config DEBUG_BFIN_HWTRACE_COMPRESSION_OFF + bool "Trace all Loops" + help + The trace buffer records all changes of flow + +config DEBUG_BFIN_HWTRACE_COMPRESSION_ONE + bool "Compress single-level loops" + help + The trace buffer does not record single loops - helpful if trace + is spinning on a while or do loop. + +config DEBUG_BFIN_HWTRACE_COMPRESSION_TWO + bool "Compress two-level loops" + help + The trace buffer does not record loops two levels deep. Helpful if + the trace is spinning in a nested loop + +endchoice + +config DEBUG_BFIN_HWTRACE_COMPRESSION + int + depends on DEBUG_BFIN_HWTRACE_ON + default 0 if DEBUG_BFIN_HWTRACE_COMPRESSION_OFF + default 1 if DEBUG_BFIN_HWTRACE_COMPRESSION_ONE + default 2 if DEBUG_BFIN_HWTRACE_COMPRESSION_TWO + + +config DEBUG_BFIN_HWTRACE_EXPAND + bool "Expand Trace Buffer greater than 16 entries" + depends on DEBUG_BFIN_HWTRACE_ON + default n + help + By selecting this option, every time the 16 hardware entries in + the Blackfin's HW Trace buffer are full, the kernel will move them + into a software buffer, for dumping when there is an issue. This + has a great impact on performance, (an interrupt every 16 change of + flows) and should normally be turned off, except in those nasty + debugging sessions + +config DEBUG_BFIN_HWTRACE_EXPAND_LEN + int "Size of Trace buffer (in power of 2k)" + range 0 4 + depends on DEBUG_BFIN_HWTRACE_EXPAND + default 1 + help + This sets the size of the software buffer that the trace information + is kept in. + 0 for (2^0) 1k, or 256 entries, + 1 for (2^1) 2k, or 512 entries, + 2 for (2^2) 4k, or 1024 entries, + 3 for (2^3) 8k, or 2048 entries, + 4 for (2^4) 16k, or 4096 entries + config DEBUG_BFIN_NO_KERN_HWTRACE bool "Trace user apps (turn off hwtrace in kernel)" + depends on DEBUG_BFIN_HWTRACE_ON default n help Some pieces of the kernel contain a lot of flow changes which can diff --git a/arch/blackfin/kernel/irqchip.c b/arch/blackfin/kernel/irqchip.c index 1fc001c7abd..462ae41144c 100644 --- a/arch/blackfin/kernel/irqchip.c +++ b/arch/blackfin/kernel/irqchip.c @@ -34,6 +34,7 @@ #include #include #include +#include static unsigned long irq_err_count; static spinlock_t irq_controller_lock; @@ -144,4 +145,12 @@ void __init init_IRQ(void) } init_arch_irq(); + +#ifdef CONFIG_DEBUG_BFIN_HWTRACE_EXPAND + /* Now that evt_ivhw is set up, turn this on */ + trace_buff_offset = 0; + bfin_write_TBUFCTL(BFIN_TRACE_ON); + printk(KERN_INFO "Hardware Trace expanded to %ik\n", + 1 << CONFIG_DEBUG_BFIN_HWTRACE_EXPAND_LEN); +#endif } diff --git a/arch/blackfin/kernel/traps.c b/arch/blackfin/kernel/traps.c index 792a8416fe1..0ec02fe663e 100644 --- a/arch/blackfin/kernel/traps.c +++ b/arch/blackfin/kernel/traps.c @@ -55,6 +55,7 @@ asmlinkage void trap_c(struct pt_regs *fp); int kstack_depth_to_print = 48; +#ifdef CONFIG_DEBUG_BFIN_HWTRACE_ON static int printk_address(unsigned long address) { struct vm_list_struct *vml; @@ -131,10 +132,14 @@ static int printk_address(unsigned long address) /* we were unable to find this address anywhere */ return printk("[<0x%p>]", (void *)address); } +#endif asmlinkage void trap_c(struct pt_regs *fp) { - int j, sig = 0; +#ifdef CONFIG_DEBUG_BFIN_HWTRACE_ON + int j; +#endif + int sig = 0; siginfo_t info; unsigned long trapnr = fp->seqstat & SEQSTAT_EXCAUSE; @@ -429,24 +434,56 @@ asmlinkage void trap_c(struct pt_regs *fp) /* Typical exception handling routines */ +#define EXPAND_LEN ((1 << CONFIG_DEBUG_BFIN_HWTRACE_EXPAND_LEN) * 256 - 1) + void dump_bfin_trace_buffer(void) { - int tflags; +#ifdef CONFIG_DEBUG_BFIN_HWTRACE_ON + int tflags, i = 0; +#ifdef CONFIG_DEBUG_BFIN_HWTRACE_EXPAND + int j, index; +#endif + trace_buffer_save(tflags); + printk(KERN_EMERG "Hardware Trace:\n"); + if (likely(bfin_read_TBUFSTAT() & TBUFCNT)) { - int i; - printk(KERN_EMERG "Hardware Trace:\n"); - for (i = 0; bfin_read_TBUFSTAT() & TBUFCNT; i++) { - printk(KERN_EMERG "%2i Target : ", i); + for (; bfin_read_TBUFSTAT() & TBUFCNT; i++) { + printk(KERN_EMERG "%4i Target : ", i); printk_address((unsigned long)bfin_read_TBUF()); - printk("\n" KERN_EMERG " Source : "); + printk("\n" KERN_EMERG " Source : "); printk_address((unsigned long)bfin_read_TBUF()); printk("\n"); } } +#ifdef CONFIG_DEBUG_BFIN_HWTRACE_EXPAND + if (trace_buff_offset) + index = trace_buff_offset/4 - 1; + else + index = EXPAND_LEN; + + j = (1 << CONFIG_DEBUG_BFIN_HWTRACE_EXPAND_LEN) * 128; + while (j) { + printk(KERN_EMERG "%4i Target : ", i); + printk_address(software_trace_buff[index]); + index -= 1; + if (index < 0 ) + index = EXPAND_LEN; + printk("\n" KERN_EMERG " Source : "); + printk_address(software_trace_buff[index]); + index -= 1; + if (index < 0) + index = EXPAND_LEN; + printk("\n"); + j--; + i++; + } +#endif + trace_buffer_restore(tflags); +#endif } EXPORT_SYMBOL(dump_bfin_trace_buffer); @@ -510,7 +547,9 @@ void show_stack(struct task_struct *task, unsigned long *stack) void dump_stack(void) { unsigned long stack; +#ifdef CONFIG_DEBUG_BFIN_HWTRACE_ON int tflags; +#endif trace_buffer_save(tflags); dump_bfin_trace_buffer(); show_stack(current, &stack); diff --git a/arch/blackfin/mach-bf533/head.S b/arch/blackfin/mach-bf533/head.S index 9c5378bb8a2..1d5b9dbbbaa 100644 --- a/arch/blackfin/mach-bf533/head.S +++ b/arch/blackfin/mach-bf533/head.S @@ -98,7 +98,7 @@ ENTRY(__start) M2 = r0; M3 = r0; - trace_buffer_start(p0,r0); + trace_buffer_init(p0,r0); P0 = R1; R0 = R1; diff --git a/arch/blackfin/mach-bf537/head.S b/arch/blackfin/mach-bf537/head.S index 82ea0470591..6dbcb77c8d3 100644 --- a/arch/blackfin/mach-bf537/head.S +++ b/arch/blackfin/mach-bf537/head.S @@ -96,7 +96,7 @@ ENTRY(__start) M2 = r0; M3 = r0; - trace_buffer_start(p0,r0); + trace_buffer_init(p0,r0); P0 = R1; R0 = R1; diff --git a/arch/blackfin/mach-bf548/head.S b/arch/blackfin/mach-bf548/head.S index 72087c2e6a8..e53d74d4c0a 100644 --- a/arch/blackfin/mach-bf548/head.S +++ b/arch/blackfin/mach-bf548/head.S @@ -93,7 +93,7 @@ ENTRY(__stext) M2 = r0; M3 = r0; - trace_buffer_start(p0,r0); + trace_buffer_init(p0,r0); P0 = R1; R0 = R1; diff --git a/arch/blackfin/mach-bf561/head.S b/arch/blackfin/mach-bf561/head.S index 83cd3f9bbf2..8c9f73b8e57 100644 --- a/arch/blackfin/mach-bf561/head.S +++ b/arch/blackfin/mach-bf561/head.S @@ -96,7 +96,7 @@ ENTRY(__start) M2 = r0; M3 = r0; - trace_buffer_start(p0,r0); + trace_buffer_init(p0,r0); P0 = R1; R0 = R1; diff --git a/arch/blackfin/mach-common/entry.S b/arch/blackfin/mach-common/entry.S index 207e69786b4..ab278a72f28 100644 --- a/arch/blackfin/mach-common/entry.S +++ b/arch/blackfin/mach-common/entry.S @@ -731,6 +731,75 @@ ENTRY(_init_exception_buff) rts; ENDPROC(_init_exception_buff) +/* We handle this 100% in exception space - to reduce overhead + * Only potiential problem is if the software buffer gets swapped out of the + * CPLB table - then double fault. - so we don't let this happen in other places + */ +#ifdef CONFIG_DEBUG_BFIN_HWTRACE_EXPAND +ENTRY(_ex_trace_buff_full) + [--sp] = P3; + [--sp] = P2; + [--sp] = LC0; + [--sp] = LT0; + [--sp] = LB0; + P5.L = _trace_buff_offset; + P5.H = _trace_buff_offset; + P3 = [P5]; /* trace_buff_offset */ + P5.L = lo(TBUFSTAT); + P5.H = hi(TBUFSTAT); + R7 = [P5]; + R7 <<= 1; /* double, since we need to read twice */ + LC0 = R7; + R7 <<= 2; /* need to shift over again, + * to get the number of bytes */ + P5.L = lo(TBUF); + P5.H = hi(TBUF); + R6 = ((1 << CONFIG_DEBUG_BFIN_HWTRACE_EXPAND_LEN)*1024) - 1; + + P2 = R7; + P3 = P3 + P2; + R7 = P3; + R7 = R7 & R6; + P3 = R7; + P2.L = _trace_buff_offset; + P2.H = _trace_buff_offset; + [P2] = P3; + + P2.L = _software_trace_buff; + P2.H = _software_trace_buff; + + LSETUP (.Lstart, .Lend) LC0; +.Lstart: + R7 = [P5]; /* read TBUF */ + P4 = P3 + P2; + [P4] = R7; + P3 += -4; + R7 = P3; + R7 = R7 & R6; +.Lend: + P3 = R7; + + LB0 = [sp++]; + LT0 = [sp++]; + LC0 = [sp++]; + P2 = [sp++]; + P3 = [sp++]; + jump _return_from_exception; + +#if CONFIG_DEBUG_BFIN_HWTRACE_EXPAND_LEN == 4 +.data +#else +.section .l1.data.B +#endif +ENTRY(_trace_buff_offset) + .long 0; +ALIGN +ENTRY(_software_trace_buff) + .rept ((1 << CONFIG_DEBUG_BFIN_HWTRACE_EXPAND_LEN)*256); + .long 0 + .endr +#endif + /* * Put these in the kernel data section - that should always be covered by * a CPLB. This is needed to ensure we don't get double fault conditions @@ -764,7 +833,11 @@ _extable: .long _ex_trap_c /* 0x0E - User Defined */ .long _ex_trap_c /* 0x0F - User Defined */ .long _ex_single_step /* 0x10 - HW Single step */ +#ifdef CONFIG_DEBUG_BFIN_HWTRACE_EXPAND + .long _ex_trace_buff_full /* 0x11 - Trace Buffer Full */ +#else .long _ex_trap_c /* 0x11 - Trace Buffer Full */ +#endif .long _ex_trap_c /* 0x12 - Reserved */ .long _ex_trap_c /* 0x13 - Reserved */ .long _ex_trap_c /* 0x14 - Reserved */ diff --git a/include/asm-blackfin/trace.h b/include/asm-blackfin/trace.h index 9c2474c9a58..6313aace9d5 100644 --- a/include/asm-blackfin/trace.h +++ b/include/asm-blackfin/trace.h @@ -6,23 +6,46 @@ #ifndef _BLACKFIN_TRACE_ #define _BLACKFIN_TRACE_ +/* Normally, we use ON, but you can't turn on software expansion until + * interrupts subsystem is ready + */ + +#define BFIN_TRACE_INIT ((CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION << 4) | 0x03) +#ifdef CONFIG_DEBUG_BFIN_HWTRACE_EXPAND +#define BFIN_TRACE_ON (BFIN_TRACE_INIT | (CONFIG_DEBUG_BFIN_HWTRACE_EXPAND << 2)) +#else +#define BFIN_TRACE_ON (BFIN_TRACE_INIT) +#endif + #ifndef __ASSEMBLY__ +extern unsigned long trace_buff_offset; +extern unsigned long software_trace_buff[]; + /* Trace Macros for C files */ +#ifdef CONFIG_DEBUG_BFIN_HWTRACE_ON + #define trace_buffer_save(x) \ - do { \ - (x) = bfin_read_TBUFCTL(); \ - bfin_write_TBUFCTL((x) & ~TBUFEN); \ - } while (0) + do { \ + (x) = bfin_read_TBUFCTL(); \ + bfin_write_TBUFCTL((x) & ~TBUFEN); \ + } while (0) #define trace_buffer_restore(x) \ - do { \ - bfin_write_TBUFCTL((x)); \ - } while (0) + do { \ + bfin_write_TBUFCTL((x)); \ + } while (0) +#else /* DEBUG_BFIN_HWTRACE_ON */ + +#define trace_buffer_save(x) +#define trace_buffer_restore(x) +#endif /* CONFIG_DEBUG_BFIN_HWTRACE_ON */ #else /* Trace Macros for Assembly files */ +#ifdef CONFIG_DEBUG_BFIN_HWTRACE_ON + #define TRACE_BUFFER_START(preg, dreg) trace_buffer_start(preg, dreg) #define TRACE_BUFFER_STOP(preg, dreg) trace_buffer_stop(preg, dreg) @@ -32,12 +55,26 @@ dreg = 0x1; \ [preg] = dreg; -#define trace_buffer_start(preg, dreg) \ +#define trace_buffer_start(preg, dreg) \ preg.L = LO(TBUFCTL); \ preg.H = HI(TBUFCTL); \ - dreg = 0x13; \ + dreg = BFIN_TRACE_ON; \ + [preg] = dreg; + +#define trace_buffer_init(preg, dreg) \ + preg.L = LO(TBUFCTL); \ + preg.H = HI(TBUFCTL); \ + dreg = BFIN_TRACE_INIT; \ [preg] = dreg; +#else /* CONFIG_DEBUG_BFIN_HWTRACE_ON */ + +#define trace_buffer_stop(preg, dreg) +#define trace_buffer_start(preg, dreg) +#define trace_buffer_init(preg, dreg) + +#endif /* CONFIG_DEBUG_BFIN_HWTRACE_ON */ + #ifdef CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE # define DEBUG_START_HWTRACE(preg, dreg) trace_buffer_start(preg, dreg) # define DEBUG_STOP_HWTRACE(preg, dreg) trace_buffer_stop(preg, dreg) -- cgit v1.2.3-70-g09d2 From 1d945e2b3e421f2ce01b2eb260392f888406933f Mon Sep 17 00:00:00 2001 From: Roy Huang Date: Wed, 10 Oct 2007 23:31:19 +0800 Subject: Blackfin arch: add set_dma_curr_addr DMA API to support sound driver recording function Signed-off-by: Roy Huang Signed-off-by: Bryan Wu --- arch/blackfin/kernel/bfin_dma_5xx.c | 10 ++++++++++ include/asm-blackfin/dma.h | 1 + 2 files changed, 11 insertions(+) (limited to 'arch') diff --git a/arch/blackfin/kernel/bfin_dma_5xx.c b/arch/blackfin/kernel/bfin_dma_5xx.c index 7cf02f02a1d..7e220190835 100644 --- a/arch/blackfin/kernel/bfin_dma_5xx.c +++ b/arch/blackfin/kernel/bfin_dma_5xx.c @@ -345,6 +345,16 @@ void set_dma_sg(unsigned int channel, struct dmasg *sg, int nr_sg) } EXPORT_SYMBOL(set_dma_sg); +void set_dma_curr_addr(unsigned int channel, unsigned long addr) +{ + BUG_ON(!(dma_ch[channel].chan_status != DMA_CHANNEL_FREE + && channel < MAX_BLACKFIN_DMA_CHANNEL)); + + dma_ch[channel].regs->curr_addr_ptr = addr; + SSYNC(); +} +EXPORT_SYMBOL(set_dma_curr_addr); + /*------------------------------------------------------------------------------ * Get the DMA status of a specific DMA channel from the system. *-----------------------------------------------------------------------------*/ diff --git a/include/asm-blackfin/dma.h b/include/asm-blackfin/dma.h index be0d913e551..4269082b154 100644 --- a/include/asm-blackfin/dma.h +++ b/include/asm-blackfin/dma.h @@ -159,6 +159,7 @@ void set_dma_y_modify(unsigned int channel, short y_modify); void set_dma_config(unsigned int channel, unsigned short config); unsigned short set_bfin_dma_config(char direction, char flow_mode, char intr_mode, char dma_mode, char width); +void set_dma_curr_addr(unsigned int channel, unsigned long addr); /* get curr status for polling */ unsigned short get_dma_curr_irqstat(unsigned int channel); -- cgit v1.2.3-70-g09d2 From 7735cefc4583175486685fced2f457fbe0fd5855 Mon Sep 17 00:00:00 2001 From: Michael Hennerich Date: Sun, 5 Aug 2007 18:55:30 +0800 Subject: Blackfin arch: Add support for the M25P16 SPI FLash Signed-off-by: Michael Hennerich Signed-off-by: Bryan Wu --- arch/blackfin/mach-bf548/head.S | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch') diff --git a/arch/blackfin/mach-bf548/head.S b/arch/blackfin/mach-bf548/head.S index e53d74d4c0a..4c7d49f4118 100644 --- a/arch/blackfin/mach-bf548/head.S +++ b/arch/blackfin/mach-bf548/head.S @@ -379,6 +379,7 @@ ENTRY(_bfin_reset) CLI R6; SSYNC; +#if 0 /* Need to determine later if this is here necessary for BF54x */ #if defined(CONFIG_MTD_M25P80) /* * The following code fix the SPI flash reboot issue, @@ -413,6 +414,7 @@ _delay_lab0_end: nop; _delay_lab1_end: nop; +#endif #endif /* Clear the bits 13-15 in SWRST if they werent cleared */ -- cgit v1.2.3-70-g09d2 From a924db7c00655447c5228bd74da070c69b7cadbc Mon Sep 17 00:00:00 2001 From: Michael Hennerich Date: Fri, 3 Aug 2007 17:43:29 +0800 Subject: Blackfin arch: Add option to priorize DMA over Core Signed-off-by: Michael Hennerich Signed-off-by: Bryan Wu --- arch/blackfin/kernel/bfin_dma_5xx.c | 5 +++++ arch/blackfin/mach-bf548/Kconfig | 7 +++++++ 2 files changed, 12 insertions(+) (limited to 'arch') diff --git a/arch/blackfin/kernel/bfin_dma_5xx.c b/arch/blackfin/kernel/bfin_dma_5xx.c index 7e220190835..62f5a35c13e 100644 --- a/arch/blackfin/kernel/bfin_dma_5xx.c +++ b/arch/blackfin/kernel/bfin_dma_5xx.c @@ -73,6 +73,11 @@ static int __init blackfin_dma_init(void) /* Mark MEMDMA Channel 0 as requested since we're using it internally */ dma_ch[CH_MEM_STREAM0_DEST].chan_status = DMA_CHANNEL_REQUESTED; dma_ch[CH_MEM_STREAM0_SRC].chan_status = DMA_CHANNEL_REQUESTED; + +#if defined(CONFIG_DEB_DMA_URGENT) + bfin_write_EBIU_DDRQUE(bfin_read_EBIU_DDRQUE() + | DEB1_URGENT | DEB2_URGENT | DEB3_URGENT); +#endif return 0; } diff --git a/arch/blackfin/mach-bf548/Kconfig b/arch/blackfin/mach-bf548/Kconfig index 3976b7f523c..08d8dc83701 100644 --- a/arch/blackfin/mach-bf548/Kconfig +++ b/arch/blackfin/mach-bf548/Kconfig @@ -2,6 +2,13 @@ if (BF54x) menu "BF548 Specific Configuration" +config DEB_DMA_URGENT + bool "DMA has priority over core for ext. accesses" + depends on BF54x + default n + help + Treat any DEB1, DEB2 and DEB3 request as Urgent + comment "Interrupt Priority Assignment" menu "Priority" -- cgit v1.2.3-70-g09d2 From a298049180d2c56fc8ac1796b24973bf4f019cc7 Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Fri, 3 Aug 2007 18:29:15 +0800 Subject: Blackfin arch: remove unused code -- EVT0 is not controllable by software Signed-off-by: Mike Frysinger Signed-off-by: Bryan Wu --- arch/blackfin/mach-common/interrupt.S | 24 ------------------------ arch/blackfin/mach-common/ints-priority-dc.c | 3 --- arch/blackfin/mach-common/ints-priority-sc.c | 3 --- include/asm-blackfin/irq_handler.h | 1 - 4 files changed, 31 deletions(-) (limited to 'arch') diff --git a/arch/blackfin/mach-common/interrupt.S b/arch/blackfin/mach-common/interrupt.S index 14ef800a564..1d5ba5e3d91 100644 --- a/arch/blackfin/mach-common/interrupt.S +++ b/arch/blackfin/mach-common/interrupt.S @@ -46,30 +46,6 @@ .align 4 /* just in case */ -/* - * initial interrupt handlers - */ - -#ifndef CONFIG_KGDB - /* interrupt routine for emulation - 0 */ - /* Currently used only if GDB stub is not in - invalid */ - /* gdb-stub set the evt itself */ - /* save registers for post-mortem only */ -ENTRY(_evt_emulation) - SAVE_ALL_SYS -#ifdef CONFIG_FRAME_POINTER - fp = 0; -#endif - r0 = IRQ_EMU; - r1 = sp; - SP += -12; - call _irq_panic; - SP += 12; - /* - GDB stub fills this in by itself (if defined) */ - rte; -ENDPROC(_evt_emulation) -#endif - /* Common interrupt entry code. First we do CLI, then push * RETI, to keep interrupts disabled, but to allow this state to be changed * by local_bh_enable. diff --git a/arch/blackfin/mach-common/ints-priority-dc.c b/arch/blackfin/mach-common/ints-priority-dc.c index d5d9e57813d..684d306ab6b 100644 --- a/arch/blackfin/mach-common/ints-priority-dc.c +++ b/arch/blackfin/mach-common/ints-priority-dc.c @@ -362,9 +362,6 @@ void __init init_exception_vectors(void) { SSYNC(); -#ifndef CONFIG_KGDB - bfin_write_EVT0(evt_emulation); -#endif bfin_write_EVT2(evt_evt2); bfin_write_EVT3(trap); bfin_write_EVT5(evt_ivhw); diff --git a/arch/blackfin/mach-common/ints-priority-sc.c b/arch/blackfin/mach-common/ints-priority-sc.c index 505b9484497..a2016af65eb 100644 --- a/arch/blackfin/mach-common/ints-priority-sc.c +++ b/arch/blackfin/mach-common/ints-priority-sc.c @@ -721,9 +721,6 @@ void __init init_exception_vectors(void) { SSYNC(); -#ifndef CONFIG_KGDB - bfin_write_EVT0(evt_emulation); -#endif bfin_write_EVT2(evt_evt2); bfin_write_EVT3(trap); bfin_write_EVT5(evt_ivhw); diff --git a/include/asm-blackfin/irq_handler.h b/include/asm-blackfin/irq_handler.h index d830f0a49a1..6a768315bbf 100644 --- a/include/asm-blackfin/irq_handler.h +++ b/include/asm-blackfin/irq_handler.h @@ -2,7 +2,6 @@ #define _IRQ_HANDLER_H /* BASE LEVEL interrupt handler routines */ -asmlinkage void evt_emulation(void); asmlinkage void evt_exception(void); asmlinkage void trap(void); asmlinkage void evt_ivhw(void); -- cgit v1.2.3-70-g09d2 From 3bebca2d20796dd3dc62c5d3e74148087c7ce5bd Mon Sep 17 00:00:00 2001 From: Robin Getz Date: Wed, 10 Oct 2007 23:55:26 +0800 Subject: Blackfin arch: to do some consolidation of common code and common name spaces now all BLKFIN should be BFIN, should be no functional changes. Signed-off-by: Robin Getz Signed-off-by: Bryan Wu --- arch/blackfin/Kconfig | 20 ++--- arch/blackfin/configs/BF533-EZKIT_defconfig | 12 +-- arch/blackfin/configs/BF533-STAMP_defconfig | 12 +-- arch/blackfin/configs/BF537-STAMP_defconfig | 12 +-- arch/blackfin/configs/BF548-EZKIT_defconfig | 12 +-- arch/blackfin/configs/BF561-EZKIT_defconfig | 12 +-- arch/blackfin/configs/PNAV-10_defconfig | 12 +-- arch/blackfin/kernel/cacheinit.c | 5 +- arch/blackfin/kernel/cplbinit.c | 5 +- arch/blackfin/kernel/process.c | 2 +- arch/blackfin/kernel/setup.c | 29 ++++---- arch/blackfin/mach-common/arch_checks.c | 5 ++ arch/blackfin/mach-common/cacheinit.S | 8 +- arch/blackfin/mach-common/cplbhdlr.S | 8 +- arch/blackfin/mach-common/cplbmgr.S | 2 +- arch/blackfin/mach-common/lock.S | 4 +- include/asm-blackfin/cacheflush.h | 14 ++-- include/asm-blackfin/cplb.h | 89 ++++++++++++++++++++-- include/asm-blackfin/mach-bf533/bf533.h | 16 ++-- include/asm-blackfin/mach-bf533/mem_map.h | 56 +++++++------- include/asm-blackfin/mach-bf537/anomaly.h | 1 + include/asm-blackfin/mach-bf537/bf537.h | 67 ++--------------- include/asm-blackfin/mach-bf537/mem_map.h | 60 +++++++-------- include/asm-blackfin/mach-bf548/bf548.h | 67 ++--------------- include/asm-blackfin/mach-bf548/mem_map.h | 24 +++--- include/asm-blackfin/mach-bf561/bf561.h | 91 ++--------------------- include/asm-blackfin/mach-bf561/mem_map.h | 24 +++--- include/asm-blackfin/mach-common/clocks.h | 4 +- include/asm-blackfin/mach-common/def_LPBlackfin.h | 3 + include/asm-blackfin/pgtable.h | 2 +- include/asm-blackfin/system.h | 2 +- 31 files changed, 289 insertions(+), 391 deletions(-) (limited to 'arch') diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig index a7a6e0c5827..17f94692015 100644 --- a/arch/blackfin/Kconfig +++ b/arch/blackfin/Kconfig @@ -722,22 +722,22 @@ endchoice comment "Cache Support" -config BLKFIN_CACHE +config BFIN_ICACHE bool "Enable ICACHE" -config BLKFIN_DCACHE +config BFIN_DCACHE bool "Enable DCACHE" -config BLKFIN_DCACHE_BANKA +config BFIN_DCACHE_BANKA bool "Enable only 16k BankA DCACHE - BankB is SRAM" - depends on BLKFIN_DCACHE && !BF531 + depends on BFIN_DCACHE && !BF531 default n -config BLKFIN_CACHE_LOCK - bool "Enable Cache Locking" +config BFIN_ICACHE_LOCK + bool "Enable Instruction Cache Locking" choice prompt "Policy" - depends on BLKFIN_DCACHE - default BLKFIN_WB -config BLKFIN_WB + depends on BFIN_DCACHE + default BFIN_WB +config BFIN_WB bool "Write back" help Write Back Policy: @@ -754,7 +754,7 @@ config BLKFIN_WB If you are unsure of the options and you want to be safe, then go with Write Through. -config BLKFIN_WT +config BFIN_WT bool "Write through" help Write Back Policy: diff --git a/arch/blackfin/configs/BF533-EZKIT_defconfig b/arch/blackfin/configs/BF533-EZKIT_defconfig index 1cf1ab28dc6..02141827e59 100644 --- a/arch/blackfin/configs/BF533-EZKIT_defconfig +++ b/arch/blackfin/configs/BF533-EZKIT_defconfig @@ -243,12 +243,12 @@ CONFIG_DMA_UNCACHED_1M=y # # Cache Support # -CONFIG_BLKFIN_CACHE=y -CONFIG_BLKFIN_DCACHE=y -# CONFIG_BLKFIN_DCACHE_BANKA is not set -# CONFIG_BLKFIN_CACHE_LOCK is not set -# CONFIG_BLKFIN_WB is not set -CONFIG_BLKFIN_WT=y +CONFIG_BFIN_ICACHE=y +CONFIG_BFIN_DCACHE=y +# CONFIG_BFIN_DCACHE_BANKA is not set +# CONFIG_BFIN_ICACHE_LOCK is not set +# CONFIG_BFIN_WB is not set +CONFIG_BFIN_WT=y CONFIG_L1_MAX_PIECE=16 # diff --git a/arch/blackfin/configs/BF533-STAMP_defconfig b/arch/blackfin/configs/BF533-STAMP_defconfig index 64b7f1b3b2a..3dbe22d7d90 100644 --- a/arch/blackfin/configs/BF533-STAMP_defconfig +++ b/arch/blackfin/configs/BF533-STAMP_defconfig @@ -255,12 +255,12 @@ CONFIG_DMA_UNCACHED_1M=y # # Cache Support # -CONFIG_BLKFIN_CACHE=y -CONFIG_BLKFIN_DCACHE=y -# CONFIG_BLKFIN_DCACHE_BANKA is not set -# CONFIG_BLKFIN_CACHE_LOCK is not set -# CONFIG_BLKFIN_WB is not set -CONFIG_BLKFIN_WT=y +CONFIG_BFIN_ICACHE=y +CONFIG_BFIN_DCACHE=y +# CONFIG_BFIN_DCACHE_BANKA is not set +# CONFIG_BFIN_ICACHE_LOCK is not set +# CONFIG_BFIN_WB is not set +CONFIG_BFIN_WT=y CONFIG_L1_MAX_PIECE=16 # diff --git a/arch/blackfin/configs/BF537-STAMP_defconfig b/arch/blackfin/configs/BF537-STAMP_defconfig index ccf09dc09a1..a28e0316e90 100644 --- a/arch/blackfin/configs/BF537-STAMP_defconfig +++ b/arch/blackfin/configs/BF537-STAMP_defconfig @@ -258,12 +258,12 @@ CONFIG_DMA_UNCACHED_1M=y # # Cache Support # -CONFIG_BLKFIN_CACHE=y -CONFIG_BLKFIN_DCACHE=y -# CONFIG_BLKFIN_DCACHE_BANKA is not set -# CONFIG_BLKFIN_CACHE_LOCK is not set -# CONFIG_BLKFIN_WB is not set -CONFIG_BLKFIN_WT=y +CONFIG_BFIN_ICACHE=y +CONFIG_BFIN_DCACHE=y +# CONFIG_BFIN_DCACHE_BANKA is not set +# CONFIG_BFIN_ICACHE_LOCK is not set +# CONFIG_BFIN_WB is not set +CONFIG_BFIN_WT=y CONFIG_L1_MAX_PIECE=16 # diff --git a/arch/blackfin/configs/BF548-EZKIT_defconfig b/arch/blackfin/configs/BF548-EZKIT_defconfig index ac8390fafa9..8f3b1de6a93 100644 --- a/arch/blackfin/configs/BF548-EZKIT_defconfig +++ b/arch/blackfin/configs/BF548-EZKIT_defconfig @@ -306,12 +306,12 @@ CONFIG_DMA_UNCACHED_1M=y # # Cache Support # -CONFIG_BLKFIN_CACHE=y -CONFIG_BLKFIN_DCACHE=y -# CONFIG_BLKFIN_DCACHE_BANKA is not set -# CONFIG_BLKFIN_CACHE_LOCK is not set -# CONFIG_BLKFIN_WB is not set -CONFIG_BLKFIN_WT=y +CONFIG_BFIN_ICACHE=y +CONFIG_BFIN_DCACHE=y +# CONFIG_BFIN_DCACHE_BANKA is not set +# CONFIG_BFIN_ICACHE_LOCK is not set +# CONFIG_BFIN_WB is not set +CONFIG_BFIN_WT=y CONFIG_L1_MAX_PIECE=16 # diff --git a/arch/blackfin/configs/BF561-EZKIT_defconfig b/arch/blackfin/configs/BF561-EZKIT_defconfig index 51c0b6f9779..698a2492424 100644 --- a/arch/blackfin/configs/BF561-EZKIT_defconfig +++ b/arch/blackfin/configs/BF561-EZKIT_defconfig @@ -288,12 +288,12 @@ CONFIG_DMA_UNCACHED_1M=y # # Cache Support # -CONFIG_BLKFIN_CACHE=y -CONFIG_BLKFIN_DCACHE=y -# CONFIG_BLKFIN_DCACHE_BANKA is not set -# CONFIG_BLKFIN_CACHE_LOCK is not set -# CONFIG_BLKFIN_WB is not set -CONFIG_BLKFIN_WT=y +CONFIG_BFIN_ICACHE=y +CONFIG_BFIN_DCACHE=y +# CONFIG_BFIN_DCACHE_BANKA is not set +# CONFIG_BFIN_ICACHE_LOCK is not set +# CONFIG_BFIN_WB is not set +CONFIG_BFIN_WT=y CONFIG_L1_MAX_PIECE=16 # diff --git a/arch/blackfin/configs/PNAV-10_defconfig b/arch/blackfin/configs/PNAV-10_defconfig index 983ed181c89..dbb0c4f399f 100644 --- a/arch/blackfin/configs/PNAV-10_defconfig +++ b/arch/blackfin/configs/PNAV-10_defconfig @@ -257,12 +257,12 @@ CONFIG_DMA_UNCACHED_1M=y # # Cache Support # -CONFIG_BLKFIN_CACHE=y -CONFIG_BLKFIN_DCACHE=y -# CONFIG_BLKFIN_DCACHE_BANKA is not set -# CONFIG_BLKFIN_CACHE_LOCK is not set -CONFIG_BLKFIN_WB=y -# CONFIG_BLKFIN_WT is not set +CONFIG_BFIN_ICACHE=y +CONFIG_BFIN_DCACHE=y +# CONFIG_BFIN_DCACHE_BANKA is not set +# CONFIG_BFIN_ICACHE_LOCK is not set +CONFIG_BFIN_WB=y +# CONFIG_BFIN_WT is not set CONFIG_L1_MAX_PIECE=16 # diff --git a/arch/blackfin/kernel/cacheinit.c b/arch/blackfin/kernel/cacheinit.c index 4d41a40e813..62cbba7364b 100644 --- a/arch/blackfin/kernel/cacheinit.c +++ b/arch/blackfin/kernel/cacheinit.c @@ -21,9 +21,10 @@ #include #include +#include #include -#if defined(CONFIG_BLKFIN_CACHE) +#if defined(CONFIG_BFIN_ICACHE) void bfin_icache_init(void) { unsigned long *table = icplb_table; @@ -44,7 +45,7 @@ void bfin_icache_init(void) } #endif -#if defined(CONFIG_BLKFIN_DCACHE) +#if defined(CONFIG_BFIN_DCACHE) void bfin_dcache_init(void) { unsigned long *table = dcplb_table; diff --git a/arch/blackfin/kernel/cplbinit.c b/arch/blackfin/kernel/cplbinit.c index 3b1c87c9fd5..f2db6a5e2b5 100644 --- a/arch/blackfin/kernel/cplbinit.c +++ b/arch/blackfin/kernel/cplbinit.c @@ -23,6 +23,7 @@ #include #include +#include #include u_long icplb_table[MAX_CPLBS+1]; @@ -56,7 +57,7 @@ struct s_cplb { struct cplb_tab switch_d; }; -#if defined(CONFIG_BLKFIN_DCACHE) || defined(CONFIG_BLKFIN_CACHE) +#if defined(CONFIG_BFIN_DCACHE) || defined(CONFIG_BFIN_ICACHE) static struct cplb_desc cplb_data[] = { { .start = 0, @@ -230,7 +231,7 @@ static void __fill_code_cplbtab(struct cplb_tab *t, int i, u32 a_start, u32 a_en cplb_data[i].psize, cplb_data[i].i_conf); } else { -#if defined(CONFIG_BLKFIN_CACHE) +#if defined(CONFIG_BFIN_ICACHE) if (ANOMALY_05000263 && i == SDRAM_KERN) { fill_cplbtab(t, cplb_data[i].start, diff --git a/arch/blackfin/kernel/process.c b/arch/blackfin/kernel/process.c index 6a7aefe4834..22e79041986 100644 --- a/arch/blackfin/kernel/process.c +++ b/arch/blackfin/kernel/process.c @@ -136,7 +136,7 @@ void cpu_idle(void) void machine_restart(char *__unused) { -#if defined(CONFIG_BLKFIN_CACHE) +#if defined(CONFIG_BFIN_ICACHE) bfin_write_IMEM_CONTROL(0x01); SSYNC(); #endif diff --git a/arch/blackfin/kernel/setup.c b/arch/blackfin/kernel/setup.c index 02c15272f8e..448e6aab73a 100644 --- a/arch/blackfin/kernel/setup.c +++ b/arch/blackfin/kernel/setup.c @@ -39,6 +39,7 @@ #include #include +#include #include #include #include @@ -66,21 +67,21 @@ char __initdata command_line[COMMAND_LINE_SIZE]; void __init bf53x_cache_init(void) { -#if defined(CONFIG_BLKFIN_DCACHE) || defined(CONFIG_BLKFIN_CACHE) +#if defined(CONFIG_BFIN_DCACHE) || defined(CONFIG_BFIN_ICACHE) generate_cpl_tables(); #endif -#ifdef CONFIG_BLKFIN_CACHE +#ifdef CONFIG_BFIN_ICACHE bfin_icache_init(); printk(KERN_INFO "Instruction Cache Enabled\n"); #endif -#ifdef CONFIG_BLKFIN_DCACHE +#ifdef CONFIG_BFIN_DCACHE bfin_dcache_init(); printk(KERN_INFO "Data Cache Enabled" -# if defined CONFIG_BLKFIN_WB +# if defined CONFIG_BFIN_WB " (write-back)" -# elif defined CONFIG_BLKFIN_WT +# elif defined CONFIG_BFIN_WT " (write-through)" # endif "\n"); @@ -262,7 +263,7 @@ void __init setup_arch(char **cmdline_p) && ((unsigned long *)mtd_phys)[1] == ROMSB_WORD1) mtd_size = PAGE_ALIGN(be32_to_cpu(((unsigned long *)mtd_phys)[2])); -# if (defined(CONFIG_BLKFIN_CACHE) && ANOMALY_05000263) +# if (defined(CONFIG_BFIN_ICACHE) && ANOMALY_05000263) /* Due to a Hardware Anomaly we need to limit the size of usable * instruction memory to max 60MB, 56 if HUNT_FOR_ZERO is on * 05000263 - Hardware loop corrupted when taking an ICPLB exception @@ -291,7 +292,7 @@ void __init setup_arch(char **cmdline_p) _ebss = memory_mtd_start; /* define _ebss for compatible */ #endif /* CONFIG_MTD_UCLINUX */ -#if (defined(CONFIG_BLKFIN_CACHE) && ANOMALY_05000263) +#if (defined(CONFIG_BFIN_ICACHE) && ANOMALY_05000263) /* Due to a Hardware Anomaly we need to limit the size of usable * instruction memory to max 60MB, 56 if HUNT_FOR_ZERO is on * 05000263 - Hardware loop corrupted when taking an ICPLB exception @@ -535,9 +536,9 @@ static int show_cpuinfo(struct seq_file *m, void *v) seq_printf(m, "I-CACHE:\tOFF\n"); if ((bfin_read_DMEM_CONTROL()) & (ENDCPLB | DMC_ENABLE)) seq_printf(m, "D-CACHE:\tON" -#if defined CONFIG_BLKFIN_WB +#if defined CONFIG_BFIN_WB " (write-back)" -#elif defined CONFIG_BLKFIN_WT +#elif defined CONFIG_BFIN_WT " (write-through)" #endif "\n"); @@ -566,15 +567,15 @@ static int show_cpuinfo(struct seq_file *m, void *v) } - seq_printf(m, "I-CACHE Size:\t%dKB\n", BLKFIN_ICACHESIZE / 1024); + seq_printf(m, "I-CACHE Size:\t%dKB\n", BFIN_ICACHESIZE / 1024); seq_printf(m, "D-CACHE Size:\t%dKB\n", dcache_size); seq_printf(m, "I-CACHE Setup:\t%d Sub-banks/%d Ways, %d Lines/Way\n", - BLKFIN_ISUBBANKS, BLKFIN_IWAYS, BLKFIN_ILINES); + BFIN_ISUBBANKS, BFIN_IWAYS, BFIN_ILINES); seq_printf(m, "D-CACHE Setup:\t%d Super-banks/%d Sub-banks/%d Ways, %d Lines/Way\n", - dsup_banks, BLKFIN_DSUBBANKS, BLKFIN_DWAYS, - BLKFIN_DLINES); -#ifdef CONFIG_BLKFIN_CACHE_LOCK + dsup_banks, BFIN_DSUBBANKS, BFIN_DWAYS, + BFIN_DLINES); +#ifdef CONFIG_BFIN_ICACHE_LOCK switch (read_iloc()) { case WAY0_L: seq_printf(m, "Way0 Locked-Down\n"); diff --git a/arch/blackfin/mach-common/arch_checks.c b/arch/blackfin/mach-common/arch_checks.c index f9160d83b91..2f6ce397780 100644 --- a/arch/blackfin/mach-common/arch_checks.c +++ b/arch/blackfin/mach-common/arch_checks.c @@ -53,3 +53,8 @@ # endif #endif /* CONFIG_BFIN_KERNEL_CLOCK */ + +#if (CONFIG_MEM_SIZE % 4) +#error "SDRAM mem size must be multible of 4MB" +#endif + diff --git a/arch/blackfin/mach-common/cacheinit.S b/arch/blackfin/mach-common/cacheinit.S index afa0adfac6c..22fada0c1cb 100644 --- a/arch/blackfin/mach-common/cacheinit.S +++ b/arch/blackfin/mach-common/cacheinit.S @@ -39,7 +39,7 @@ .text #if ANOMALY_05000125 -#if defined(CONFIG_BLKFIN_CACHE) +#if defined(CONFIG_BFIN_ICACHE) ENTRY(_bfin_write_IMEM_CONTROL) /* Enable Instruction Cache */ @@ -58,10 +58,10 @@ ENTRY(_bfin_write_IMEM_CONTROL) ENDPROC(_bfin_write_IMEM_CONTROL) #endif -#if defined(CONFIG_BLKFIN_DCACHE) +#if defined(CONFIG_BFIN_DCACHE) ENTRY(_bfin_write_DMEM_CONTROL) - P0.l = (DMEM_CONTROL & 0xFFFF); - P0.h = (DMEM_CONTROL >> 16); + P0.l = LO(DMEM_CONTROL); + P0.h = HI(DMEM_CONTROL); CLI R1; SSYNC; /* SSYNC required before writing to DMEM_CONTROL. */ diff --git a/arch/blackfin/mach-common/cplbhdlr.S b/arch/blackfin/mach-common/cplbhdlr.S index 2f3c72c2399..2788532de72 100644 --- a/arch/blackfin/mach-common/cplbhdlr.S +++ b/arch/blackfin/mach-common/cplbhdlr.S @@ -69,14 +69,14 @@ ENTRY(__cplb_hdr) .Lis_icplb_miss: -#if defined(CONFIG_BLKFIN_CACHE) || defined(CONFIG_BLKFIN_DCACHE) -# if defined(CONFIG_BLKFIN_CACHE) && !defined(CONFIG_BLKFIN_DCACHE) +#if defined(CONFIG_BFIN_ICACHE) || defined(CONFIG_BFIN_DCACHE) +# if defined(CONFIG_BFIN_ICACHE) && !defined(CONFIG_BFIN_DCACHE) R1 = CPLB_ENABLE_ICACHE; # endif -# if !defined(CONFIG_BLKFIN_CACHE) && defined(CONFIG_BLKFIN_DCACHE) +# if !defined(CONFIG_BFIN_ICACHE) && defined(CONFIG_BFIN_DCACHE) R1 = CPLB_ENABLE_DCACHE; # endif -# if defined(CONFIG_BLKFIN_CACHE) && defined(CONFIG_BLKFIN_DCACHE) +# if defined(CONFIG_BFIN_ICACHE) && defined(CONFIG_BFIN_DCACHE) R1 = CPLB_ENABLE_DCACHE | CPLB_ENABLE_ICACHE; # endif #else diff --git a/arch/blackfin/mach-common/cplbmgr.S b/arch/blackfin/mach-common/cplbmgr.S index cef94c13f95..946703ef48f 100644 --- a/arch/blackfin/mach-common/cplbmgr.S +++ b/arch/blackfin/mach-common/cplbmgr.S @@ -565,7 +565,7 @@ ENTRY(_cplb_mgr) * cost of first-write exceptions to mark the page as dirty. */ -#ifdef CONFIG_BLKFIN_WT +#ifdef CONFIG_BFIN_WT BITSET(R6, 14); /* Set WT*/ #endif diff --git a/arch/blackfin/mach-common/lock.S b/arch/blackfin/mach-common/lock.S index 190edb3cdc8..28b87fe9ce3 100644 --- a/arch/blackfin/mach-common/lock.S +++ b/arch/blackfin/mach-common/lock.S @@ -33,7 +33,7 @@ .text -#ifdef CONFIG_BLKFIN_CACHE_LOCK +#ifdef CONFIG_BFIN_ICACHE_LOCK /* When you come here, it is assumed that * R0 - Which way to be locked @@ -189,7 +189,7 @@ ENTRY(_cache_lock) RTS; ENDPROC(_cache_lock) -#endif /* BLKFIN_CACHE_LOCK */ +#endif /* BFIN_ICACHE_LOCK */ /* Return the ILOC bits of IMEM_CONTROL */ diff --git a/include/asm-blackfin/cacheflush.h b/include/asm-blackfin/cacheflush.h index e5e000de3c3..d81a77545a0 100644 --- a/include/asm-blackfin/cacheflush.h +++ b/include/asm-blackfin/cacheflush.h @@ -48,9 +48,9 @@ extern void blackfin_dflush_page(void *); static inline void flush_icache_range(unsigned start, unsigned end) { -#if defined(CONFIG_BLKFIN_DCACHE) && defined(CONFIG_BLKFIN_CACHE) +#if defined(CONFIG_BFIN_DCACHE) && defined(CONFIG_BFIN_ICACHE) -# if defined(CONFIG_BLKFIN_WT) +# if defined(CONFIG_BFIN_WT) blackfin_icache_flush_range((start), (end)); # else blackfin_icache_dcache_flush_range((start), (end)); @@ -58,10 +58,10 @@ static inline void flush_icache_range(unsigned start, unsigned end) #else -# if defined(CONFIG_BLKFIN_CACHE) +# if defined(CONFIG_BFIN_ICACHE) blackfin_icache_flush_range((start), (end)); # endif -# if defined(CONFIG_BLKFIN_DCACHE) +# if defined(CONFIG_BFIN_DCACHE) blackfin_dcache_flush_range((start), (end)); # endif @@ -74,12 +74,12 @@ do { memcpy(dst, src, len); \ } while (0) #define copy_from_user_page(vma, page, vaddr, dst, src, len) memcpy(dst, src, len) -#if defined(CONFIG_BLKFIN_DCACHE) +#if defined(CONFIG_BFIN_DCACHE) # define invalidate_dcache_range(start,end) blackfin_dcache_invalidate_range((start), (end)) #else # define invalidate_dcache_range(start,end) do { } while (0) #endif -#if defined(CONFIG_BLKFIN_DCACHE) && defined(CONFIG_BLKFIN_WB) +#if defined(CONFIG_BFIN_DCACHE) && defined(CONFIG_BFIN_WB) # define flush_dcache_range(start,end) blackfin_dcache_flush_range((start), (end)) # define flush_dcache_page(page) blackfin_dflush_page(page_address(page)) #else @@ -87,4 +87,4 @@ do { memcpy(dst, src, len); \ # define flush_dcache_page(page) do { } while (0) #endif -#endif /* _BLACKFIN_CACHEFLUSH_H */ +#endif /* _BLACKFIN_ICACHEFLUSH_H */ diff --git a/include/asm-blackfin/cplb.h b/include/asm-blackfin/cplb.h index e0dd56bfa4c..c9fc77684fb 100644 --- a/include/asm-blackfin/cplb.h +++ b/include/asm-blackfin/cplb.h @@ -1,18 +1,93 @@ -/************************************************************************ +/* + * File: include/asm-blackfin/cplb.h + * Based on: include/asm-blackfin/mach-bf537/bf537.h + * Author: Robin Getz * - * cplb.h + * Created: 2000 + * Description: Common CPLB definitions for CPLB init * - * (c) Copyright 2002-2003 Analog Devices, Inc. All rights reserved. + * Modified: + * Copyright 2004-2007 Analog Devices Inc. * - ************************************************************************/ - -/* Defines necessary for cplb initialisation routines. */ + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see the file COPYING, or write + * to the Free Software Foundation, Inc., + * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ #ifndef _CPLB_H #define _CPLB_H # include +#define SDRAM_IGENERIC (CPLB_L1_CHBL | CPLB_USER_RD | CPLB_VALID | CPLB_PORTPRIO) +#define SDRAM_IKERNEL (SDRAM_IGENERIC | CPLB_LOCK) +#define L1_IMEMORY ( CPLB_USER_RD | CPLB_VALID | CPLB_LOCK) +#define SDRAM_INON_CHBL ( CPLB_USER_RD | CPLB_VALID) + +/*Use the menuconfig cache policy here - CONFIG_BFIN_WT/CONFIG_BFIN_WB*/ + +#if ANOMALY_05000158 +#define ANOMALY_05000158_WORKAROUND 0x200 +#else +#define ANOMALY_05000158_WORKAROUND 0x0 +#endif + +#define CPLB_COMMON (CPLB_DIRTY | CPLB_SUPV_WR | CPLB_USER_WR | CPLB_USER_RD | CPLB_VALID | ANOMALY_05000158_WORKAROUND) + +#ifdef CONFIG_BFIN_WB /*Write Back Policy */ +#define SDRAM_DGENERIC (CPLB_L1_CHBL | CPLB_COMMON) +#else /*Write Through */ +#define SDRAM_DGENERIC (CPLB_L1_CHBL | CPLB_WT | CPLB_L1_AOW | CPLB_COMMON) +#endif + +#define L1_DMEMORY (CPLB_LOCK | CPLB_COMMON) +#define SDRAM_DNON_CHBL (CPLB_COMMON) +#define SDRAM_EBIU (CPLB_COMMON) +#define SDRAM_OOPS (CPLB_VALID | ANOMALY_05000158_WORKAROUND | CPLB_LOCK | CPLB_DIRTY) + +#define SIZE_1K 0x00000400 /* 1K */ +#define SIZE_4K 0x00001000 /* 4K */ +#define SIZE_1M 0x00100000 /* 1M */ +#define SIZE_4M 0x00400000 /* 4M */ + +#define MAX_CPLBS (16 * 2) + +/* +* Number of required data CPLB switchtable entries +* MEMSIZE / 4 (we mostly install 4M page size CPLBs +* approx 16 for smaller 1MB page size CPLBs for allignment purposes +* 1 for L1 Data Memory +* 1 for CONFIG_DEBUG_HUNT_FOR_ZERO +* 1 for ASYNC Memory +*/ + + +#define MAX_SWITCH_D_CPLBS (((CONFIG_MEM_SIZE / 4) + 16 + 1 + 1 + 1) * 2) + +/* +* Number of required instruction CPLB switchtable entries +* MEMSIZE / 4 (we mostly install 4M page size CPLBs +* approx 12 for smaller 1MB page size CPLBs for allignment purposes +* 1 for L1 Instruction Memory +* 1 for CONFIG_DEBUG_HUNT_FOR_ZERO +*/ + +#define MAX_SWITCH_I_CPLBS (((CONFIG_MEM_SIZE / 4) + 12 + 1 + 1) * 2) + + #define CPLB_ENABLE_ICACHE_P 0 #define CPLB_ENABLE_DCACHE_P 1 #define CPLB_ENABLE_DCACHE2_P 2 @@ -39,8 +114,6 @@ #define CPLB_DEF_CACHE CPLB_L1_CHBL | CPLB_WT #define CPLB_CACHE_ENABLED CPLB_L1_CHBL | CPLB_DIRTY -#define CPLB_ALL_ACCESS CPLB_SUPV_WR | CPLB_USER_RD | CPLB_USER_WR - #define CPLB_I_PAGE_MGMT CPLB_LOCK | CPLB_VALID #define CPLB_D_PAGE_MGMT CPLB_LOCK | CPLB_ALL_ACCESS | CPLB_VALID #define CPLB_DNOCACHE CPLB_ALL_ACCESS | CPLB_VALID diff --git a/include/asm-blackfin/mach-bf533/bf533.h b/include/asm-blackfin/mach-bf533/bf533.h index cb210f6f768..cb0785768b3 100644 --- a/include/asm-blackfin/mach-bf533/bf533.h +++ b/include/asm-blackfin/mach-bf533/bf533.h @@ -52,12 +52,12 @@ /***************************/ -#define BLKFIN_DSUBBANKS 4 -#define BLKFIN_DWAYS 2 -#define BLKFIN_DLINES 64 -#define BLKFIN_ISUBBANKS 4 -#define BLKFIN_IWAYS 4 -#define BLKFIN_ILINES 32 +#define BFIN_DSUBBANKS 4 +#define BFIN_DWAYS 2 +#define BFIN_DLINES 64 +#define BFIN_ISUBBANKS 4 +#define BFIN_IWAYS 4 +#define BFIN_ILINES 32 #define WAY0_L 0x1 #define WAY1_L 0x2 @@ -167,10 +167,10 @@ #define L1_IMEMORY ( CPLB_USER_RD | CPLB_VALID | CPLB_LOCK) #define SDRAM_INON_CHBL ( CPLB_USER_RD | CPLB_VALID) -/*Use the menuconfig cache policy here - CONFIG_BLKFIN_WT/CONFIG_BLKFIN_WB*/ +/*Use the menuconfig cache policy here - CONFIG_BFIN_WT/CONFIG_BFIN_WB*/ #define ANOMALY_05000158_WORKAROUND 0x200 -#ifdef CONFIG_BLKFIN_WB /*Write Back Policy */ +#ifdef CONFIG_BFIN_WB /*Write Back Policy */ #define SDRAM_DGENERIC (CPLB_L1_CHBL | CPLB_DIRTY \ | CPLB_SUPV_WR | CPLB_USER_WR | CPLB_USER_RD | CPLB_VALID | ANOMALY_05000158_WORKAROUND) #else /*Write Through */ diff --git a/include/asm-blackfin/mach-bf533/mem_map.h b/include/asm-blackfin/mach-bf533/mem_map.h index e84baa3e939..94d8c4062eb 100644 --- a/include/asm-blackfin/mach-bf533/mem_map.h +++ b/include/asm-blackfin/mach-bf533/mem_map.h @@ -51,10 +51,10 @@ /* Level 1 Memory */ -#ifdef CONFIG_BLKFIN_CACHE -#define BLKFIN_ICACHESIZE (16*1024) +#ifdef CONFIG_BFIN_ICACHE +#define BFIN_ICACHESIZE (16*1024) #else -#define BLKFIN_ICACHESIZE (0*1024) +#define BFIN_ICACHESIZE (0*1024) #endif /* Memory Map for ADSP-BF533 processors */ @@ -64,35 +64,35 @@ #define L1_DATA_A_START 0xFF800000 #define L1_DATA_B_START 0xFF900000 -#ifdef CONFIG_BLKFIN_CACHE +#ifdef CONFIG_BFIN_ICACHE #define L1_CODE_LENGTH (0x14000 - 0x4000) #else #define L1_CODE_LENGTH 0x14000 #endif -#ifdef CONFIG_BLKFIN_DCACHE +#ifdef CONFIG_BFIN_DCACHE -#ifdef CONFIG_BLKFIN_DCACHE_BANKA +#ifdef CONFIG_BFIN_DCACHE_BANKA #define DMEM_CNTR (ACACHE_BSRAM | ENDCPLB | PORT_PREF0) #define L1_DATA_A_LENGTH (0x8000 - 0x4000) #define L1_DATA_B_LENGTH 0x8000 -#define BLKFIN_DCACHESIZE (16*1024) -#define BLKFIN_DSUPBANKS 1 +#define BFIN_DCACHESIZE (16*1024) +#define BFIN_DSUPBANKS 1 #else #define DMEM_CNTR (ACACHE_BCACHE | ENDCPLB | PORT_PREF0) #define L1_DATA_A_LENGTH (0x8000 - 0x4000) #define L1_DATA_B_LENGTH (0x8000 - 0x4000) -#define BLKFIN_DCACHESIZE (32*1024) -#define BLKFIN_DSUPBANKS 2 +#define BFIN_DCACHESIZE (32*1024) +#define BFIN_DSUPBANKS 2 #endif #else #define DMEM_CNTR (ASRAM_BSRAM | ENDCPLB | PORT_PREF0) #define L1_DATA_A_LENGTH 0x8000 #define L1_DATA_B_LENGTH 0x8000 -#define BLKFIN_DCACHESIZE (0*1024) -#define BLKFIN_DSUPBANKS 0 -#endif /*CONFIG_BLKFIN_DCACHE*/ +#define BFIN_DCACHESIZE (0*1024) +#define BFIN_DSUPBANKS 0 +#endif /*CONFIG_BFIN_DCACHE*/ #endif /* Memory Map for ADSP-BF532 processors */ @@ -102,36 +102,36 @@ #define L1_DATA_A_START 0xFF804000 #define L1_DATA_B_START 0xFF904000 -#ifdef CONFIG_BLKFIN_CACHE +#ifdef CONFIG_BFIN_ICACHE #define L1_CODE_LENGTH (0xC000 - 0x4000) #else #define L1_CODE_LENGTH 0xC000 #endif -#ifdef CONFIG_BLKFIN_DCACHE +#ifdef CONFIG_BFIN_DCACHE -#ifdef CONFIG_BLKFIN_DCACHE_BANKA +#ifdef CONFIG_BFIN_DCACHE_BANKA #define DMEM_CNTR (ACACHE_BSRAM | ENDCPLB | PORT_PREF0) #define L1_DATA_A_LENGTH (0x4000 - 0x4000) #define L1_DATA_B_LENGTH 0x4000 -#define BLKFIN_DCACHESIZE (16*1024) -#define BLKFIN_DSUPBANKS 1 +#define BFIN_DCACHESIZE (16*1024) +#define BFIN_DSUPBANKS 1 #else #define DMEM_CNTR (ACACHE_BCACHE | ENDCPLB | PORT_PREF0) #define L1_DATA_A_LENGTH (0x4000 - 0x4000) #define L1_DATA_B_LENGTH (0x4000 - 0x4000) -#define BLKFIN_DCACHESIZE (32*1024) -#define BLKFIN_DSUPBANKS 2 +#define BFIN_DCACHESIZE (32*1024) +#define BFIN_DSUPBANKS 2 #endif #else #define DMEM_CNTR (ASRAM_BSRAM | ENDCPLB | PORT_PREF0) #define L1_DATA_A_LENGTH 0x4000 #define L1_DATA_B_LENGTH 0x4000 -#define BLKFIN_DCACHESIZE (0*1024) -#define BLKFIN_DSUPBANKS 0 -#endif /*CONFIG_BLKFIN_DCACHE*/ +#define BFIN_DCACHESIZE (0*1024) +#define BFIN_DSUPBANKS 0 +#endif /*CONFIG_BFIN_DCACHE*/ #endif /* Memory Map for ADSP-BF531 processors */ @@ -144,16 +144,16 @@ #define L1_DATA_B_LENGTH 0x0000 -#ifdef CONFIG_BLKFIN_DCACHE +#ifdef CONFIG_BFIN_DCACHE #define DMEM_CNTR (ACACHE_BSRAM | ENDCPLB | PORT_PREF0) #define L1_DATA_A_LENGTH (0x4000 - 0x4000) -#define BLKFIN_DCACHESIZE (16*1024) -#define BLKFIN_DSUPBANKS 1 +#define BFIN_DCACHESIZE (16*1024) +#define BFIN_DSUPBANKS 1 #else #define DMEM_CNTR (ASRAM_BSRAM | ENDCPLB | PORT_PREF0) #define L1_DATA_A_LENGTH 0x4000 -#define BLKFIN_DCACHESIZE (0*1024) -#define BLKFIN_DSUPBANKS 0 +#define BFIN_DCACHESIZE (0*1024) +#define BFIN_DSUPBANKS 0 #endif #endif diff --git a/include/asm-blackfin/mach-bf537/anomaly.h b/include/asm-blackfin/mach-bf537/anomaly.h index 3803f156bf1..e377064b307 100644 --- a/include/asm-blackfin/mach-bf537/anomaly.h +++ b/include/asm-blackfin/mach-bf537/anomaly.h @@ -133,6 +133,7 @@ /* Anomalies that don't exist on this proc */ #define ANOMALY_05000125 (0) +#define ANOMALY_05000158 (0) #define ANOMALY_05000183 (0) #define ANOMALY_05000198 (0) #define ANOMALY_05000266 (0) diff --git a/include/asm-blackfin/mach-bf537/bf537.h b/include/asm-blackfin/mach-bf537/bf537.h index 603823f51ca..cfe2a221112 100644 --- a/include/asm-blackfin/mach-bf537/bf537.h +++ b/include/asm-blackfin/mach-bf537/bf537.h @@ -62,12 +62,12 @@ /***************************/ -#define BLKFIN_DSUBBANKS 4 -#define BLKFIN_DWAYS 2 -#define BLKFIN_DLINES 64 -#define BLKFIN_ISUBBANKS 4 -#define BLKFIN_IWAYS 4 -#define BLKFIN_ILINES 32 +#define BFIN_DSUBBANKS 4 +#define BFIN_DWAYS 2 +#define BFIN_DLINES 64 +#define BFIN_ISUBBANKS 4 +#define BFIN_IWAYS 4 +#define BFIN_ILINES 32 #define WAY0_L 0x1 #define WAY1_L 0x2 @@ -138,59 +138,4 @@ #define CPUID 0x0 #endif -#if (CONFIG_MEM_SIZE % 4) -#error "SDRAM mem size must be multible of 4MB" -#endif - -#define SDRAM_IGENERIC (CPLB_L1_CHBL | CPLB_USER_RD | CPLB_VALID | CPLB_PORTPRIO) -#define SDRAM_IKERNEL (SDRAM_IGENERIC | CPLB_LOCK) -#define L1_IMEMORY ( CPLB_USER_RD | CPLB_VALID | CPLB_LOCK) -#define SDRAM_INON_CHBL ( CPLB_USER_RD | CPLB_VALID) - -/*Use the menuconfig cache policy here - CONFIG_BLKFIN_WT/CONFIG_BLKFIN_WB*/ - -#define ANOMALY_05000158_WORKAROUND 0x200 -#ifdef CONFIG_BLKFIN_WB /*Write Back Policy */ -#define SDRAM_DGENERIC (CPLB_L1_CHBL | CPLB_DIRTY \ - | CPLB_SUPV_WR | CPLB_USER_WR | CPLB_USER_RD | CPLB_VALID | ANOMALY_05000158_WORKAROUND) -#else /*Write Through */ -#define SDRAM_DGENERIC (CPLB_L1_CHBL | CPLB_WT | CPLB_L1_AOW \ - | CPLB_SUPV_WR | CPLB_USER_WR | CPLB_USER_RD | CPLB_VALID | ANOMALY_05000158_WORKAROUND | CPLB_DIRTY ) -#endif - - -#define L1_DMEMORY (CPLB_SUPV_WR | CPLB_USER_WR | CPLB_USER_RD | CPLB_VALID | ANOMALY_05000158_WORKAROUND | CPLB_LOCK | CPLB_DIRTY ) -#define SDRAM_DNON_CHBL (CPLB_SUPV_WR | CPLB_USER_WR | CPLB_USER_RD | CPLB_VALID | ANOMALY_05000158_WORKAROUND | CPLB_DIRTY ) -#define SDRAM_EBIU (CPLB_SUPV_WR | CPLB_USER_WR | CPLB_USER_RD | CPLB_VALID | ANOMALY_05000158_WORKAROUND | CPLB_DIRTY ) -#define SDRAM_OOPS (CPLB_VALID | ANOMALY_05000158_WORKAROUND | CPLB_LOCK | CPLB_DIRTY ) - -#define SIZE_1K 0x00000400 /* 1K */ -#define SIZE_4K 0x00001000 /* 4K */ -#define SIZE_1M 0x00100000 /* 1M */ -#define SIZE_4M 0x00400000 /* 4M */ - -#define MAX_CPLBS (16 * 2) - -/* -* Number of required data CPLB switchtable entries -* MEMSIZE / 4 (we mostly install 4M page size CPLBs -* approx 16 for smaller 1MB page size CPLBs for allignment purposes -* 1 for L1 Data Memory -* 1 for CONFIG_DEBUG_HUNT_FOR_ZERO -* 1 for ASYNC Memory -*/ - - -#define MAX_SWITCH_D_CPLBS (((CONFIG_MEM_SIZE / 4) + 16 + 1 + 1 + 1) * 2) - -/* -* Number of required instruction CPLB switchtable entries -* MEMSIZE / 4 (we mostly install 4M page size CPLBs -* approx 12 for smaller 1MB page size CPLBs for allignment purposes -* 1 for L1 Instruction Memory -* 1 for CONFIG_DEBUG_HUNT_FOR_ZERO -*/ - -#define MAX_SWITCH_I_CPLBS (((CONFIG_MEM_SIZE / 4) + 12 + 1 + 1) * 2) - #endif /* __MACH_BF537_H__ */ diff --git a/include/asm-blackfin/mach-bf537/mem_map.h b/include/asm-blackfin/mach-bf537/mem_map.h index 2a808c1202b..18759e38eaa 100644 --- a/include/asm-blackfin/mach-bf537/mem_map.h +++ b/include/asm-blackfin/mach-bf537/mem_map.h @@ -52,10 +52,10 @@ /* Memory Map for ADSP-BF537 processors */ -#ifdef CONFIG_BLKFIN_CACHE -#define BLKFIN_ICACHESIZE (16*1024) +#ifdef CONFIG_BFIN_ICACHE +#define BFIN_ICACHESIZE (16*1024) #else -#define BLKFIN_ICACHESIZE (0*1024) +#define BFIN_ICACHESIZE (0*1024) #endif @@ -66,29 +66,29 @@ #define L1_CODE_LENGTH 0xC000 -#ifdef CONFIG_BLKFIN_DCACHE +#ifdef CONFIG_BFIN_DCACHE -#ifdef CONFIG_BLKFIN_DCACHE_BANKA +#ifdef CONFIG_BFIN_DCACHE_BANKA #define DMEM_CNTR (ACACHE_BSRAM | ENDCPLB | PORT_PREF0) #define L1_DATA_A_LENGTH (0x8000 - 0x4000) #define L1_DATA_B_LENGTH 0x8000 -#define BLKFIN_DCACHESIZE (16*1024) -#define BLKFIN_DSUPBANKS 1 +#define BFIN_DCACHESIZE (16*1024) +#define BFIN_DSUPBANKS 1 #else #define DMEM_CNTR (ACACHE_BCACHE | ENDCPLB | PORT_PREF0) #define L1_DATA_A_LENGTH (0x8000 - 0x4000) #define L1_DATA_B_LENGTH (0x8000 - 0x4000) -#define BLKFIN_DCACHESIZE (32*1024) -#define BLKFIN_DSUPBANKS 2 +#define BFIN_DCACHESIZE (32*1024) +#define BFIN_DSUPBANKS 2 #endif #else #define DMEM_CNTR (ASRAM_BSRAM | ENDCPLB | PORT_PREF0) #define L1_DATA_A_LENGTH 0x8000 #define L1_DATA_B_LENGTH 0x8000 -#define BLKFIN_DCACHESIZE (0*1024) -#define BLKFIN_DSUPBANKS 0 -#endif /*CONFIG_BLKFIN_DCACHE*/ +#define BFIN_DCACHESIZE (0*1024) +#define BFIN_DSUPBANKS 0 +#endif /*CONFIG_BFIN_DCACHE*/ #endif /*CONFIG_BF537*/ @@ -102,30 +102,30 @@ #define L1_CODE_LENGTH 0xC000 -#ifdef CONFIG_BLKFIN_DCACHE +#ifdef CONFIG_BFIN_DCACHE -#ifdef CONFIG_BLKFIN_DCACHE_BANKA +#ifdef CONFIG_BFIN_DCACHE_BANKA #define DMEM_CNTR (ACACHE_BSRAM | ENDCPLB | PORT_PREF0) #define L1_DATA_A_LENGTH (0x4000 - 0x4000) #define L1_DATA_B_LENGTH 0x4000 -#define BLKFIN_DCACHESIZE (16*1024) -#define BLKFIN_DSUPBANKS 1 +#define BFIN_DCACHESIZE (16*1024) +#define BFIN_DSUPBANKS 1 #else #define DMEM_CNTR (ACACHE_BCACHE | ENDCPLB | PORT_PREF0) #define L1_DATA_A_LENGTH (0x4000 - 0x4000) #define L1_DATA_B_LENGTH (0x4000 - 0x4000) -#define BLKFIN_DCACHESIZE (32*1024) -#define BLKFIN_DSUPBANKS 2 +#define BFIN_DCACHESIZE (32*1024) +#define BFIN_DSUPBANKS 2 #endif #else #define DMEM_CNTR (ASRAM_BSRAM | ENDCPLB | PORT_PREF0) #define L1_DATA_A_LENGTH 0x4000 #define L1_DATA_B_LENGTH 0x4000 -#define BLKFIN_DCACHESIZE (0*1024) -#define BLKFIN_DSUPBANKS 0 -#endif /*CONFIG_BLKFIN_DCACHE*/ +#define BFIN_DCACHESIZE (0*1024) +#define BFIN_DSUPBANKS 0 +#endif /*CONFIG_BFIN_DCACHE*/ #endif @@ -138,30 +138,30 @@ #define L1_CODE_LENGTH 0xC000 -#ifdef CONFIG_BLKFIN_DCACHE +#ifdef CONFIG_BFIN_DCACHE -#ifdef CONFIG_BLKFIN_DCACHE_BANKA +#ifdef CONFIG_BFIN_DCACHE_BANKA #define DMEM_CNTR (ACACHE_BSRAM | ENDCPLB | PORT_PREF0) #define L1_DATA_A_LENGTH (0x8000 - 0x4000) #define L1_DATA_B_LENGTH 0x8000 -#define BLKFIN_DCACHESIZE (16*1024) -#define BLKFIN_DSUPBANKS 1 +#define BFIN_DCACHESIZE (16*1024) +#define BFIN_DSUPBANKS 1 #else #define DMEM_CNTR (ACACHE_BCACHE | ENDCPLB | PORT_PREF0) #define L1_DATA_A_LENGTH (0x8000 - 0x4000) #define L1_DATA_B_LENGTH (0x8000 - 0x4000) -#define BLKFIN_DCACHESIZE (32*1024) -#define BLKFIN_DSUPBANKS 2 +#define BFIN_DCACHESIZE (32*1024) +#define BFIN_DSUPBANKS 2 #endif #else #define DMEM_CNTR (ASRAM_BSRAM | ENDCPLB | PORT_PREF0) #define L1_DATA_A_LENGTH 0x8000 #define L1_DATA_B_LENGTH 0x8000 -#define BLKFIN_DCACHESIZE (0*1024) -#define BLKFIN_DSUPBANKS 0 -#endif /*CONFIG_BLKFIN_DCACHE*/ +#define BFIN_DCACHESIZE (0*1024) +#define BFIN_DSUPBANKS 0 +#endif /*CONFIG_BFIN_DCACHE*/ #endif diff --git a/include/asm-blackfin/mach-bf548/bf548.h b/include/asm-blackfin/mach-bf548/bf548.h index 50306a84662..7e6d349beb0 100644 --- a/include/asm-blackfin/mach-bf548/bf548.h +++ b/include/asm-blackfin/mach-bf548/bf548.h @@ -52,12 +52,12 @@ /***************************/ -#define BLKFIN_DSUBBANKS 4 -#define BLKFIN_DWAYS 2 -#define BLKFIN_DLINES 64 -#define BLKFIN_ISUBBANKS 4 -#define BLKFIN_IWAYS 4 -#define BLKFIN_ILINES 32 +#define BFIN_DSUBBANKS 4 +#define BFIN_DWAYS 2 +#define BFIN_DLINES 64 +#define BFIN_ISUBBANKS 4 +#define BFIN_IWAYS 4 +#define BFIN_ILINES 32 #define WAY0_L 0x1 #define WAY1_L 0x2 @@ -126,59 +126,4 @@ #define CPUID 0x0 #endif -#if (CONFIG_MEM_SIZE % 4) -#error "SDRAM mem size must be multible of 4MB" -#endif - -#define SDRAM_IGENERIC (CPLB_L1_CHBL | CPLB_USER_RD | CPLB_VALID | CPLB_PORTPRIO) -#define SDRAM_IKERNEL (SDRAM_IGENERIC | CPLB_LOCK) -#define L1_IMEMORY ( CPLB_USER_RD | CPLB_VALID | CPLB_LOCK) -#define SDRAM_INON_CHBL ( CPLB_USER_RD | CPLB_VALID) - -/*Use the menuconfig cache policy here - CONFIG_BLKFIN_WT/CONFIG_BLKFIN_WB*/ - -#define ANOMALY_05000158_WORKAROUND 0x200 -#ifdef CONFIG_BLKFIN_WB /*Write Back Policy */ -#define SDRAM_DGENERIC (CPLB_L1_CHBL | CPLB_DIRTY \ - | CPLB_SUPV_WR | CPLB_USER_WR | CPLB_USER_RD | CPLB_VALID | ANOMALY_05000158_WORKAROUND) -#else /*Write Through */ -#define SDRAM_DGENERIC (CPLB_L1_CHBL | CPLB_WT | CPLB_L1_AOW \ - | CPLB_SUPV_WR | CPLB_USER_WR | CPLB_USER_RD | CPLB_VALID | ANOMALY_05000158_WORKAROUND | CPLB_DIRTY ) -#endif - - -#define L1_DMEMORY (CPLB_SUPV_WR | CPLB_USER_WR | CPLB_USER_RD | CPLB_VALID | ANOMALY_05000158_WORKAROUND | CPLB_LOCK | CPLB_DIRTY ) -#define SDRAM_DNON_CHBL (CPLB_SUPV_WR | CPLB_USER_WR | CPLB_USER_RD | CPLB_VALID | ANOMALY_05000158_WORKAROUND | CPLB_DIRTY ) -#define SDRAM_EBIU (CPLB_SUPV_WR | CPLB_USER_WR | CPLB_USER_RD | CPLB_VALID | ANOMALY_05000158_WORKAROUND | CPLB_DIRTY ) -#define SDRAM_OOPS (CPLB_VALID | ANOMALY_05000158_WORKAROUND | CPLB_LOCK | CPLB_DIRTY ) - -#define SIZE_1K 0x00000400 /* 1K */ -#define SIZE_4K 0x00001000 /* 4K */ -#define SIZE_1M 0x00100000 /* 1M */ -#define SIZE_4M 0x00400000 /* 4M */ - -#define MAX_CPLBS (16 * 2) - -/* -* Number of required data CPLB switchtable entries -* MEMSIZE / 4 (we mostly install 4M page size CPLBs -* approx 16 for smaller 1MB page size CPLBs for allignment purposes -* 1 for L1 Data Memory -* 1 for CONFIG_DEBUG_HUNT_FOR_ZERO -* 1 for ASYNC Memory -*/ - - -#define MAX_SWITCH_D_CPLBS (((CONFIG_MEM_SIZE / 4) + 16 + 1 + 1 + 1) * 2) - -/* -* Number of required instruction CPLB switchtable entries -* MEMSIZE / 4 (we mostly install 4M page size CPLBs -* approx 12 for smaller 1MB page size CPLBs for allignment purposes -* 1 for L1 Instruction Memory -* 1 for CONFIG_DEBUG_HUNT_FOR_ZERO -*/ - -#define MAX_SWITCH_I_CPLBS (((CONFIG_MEM_SIZE / 4) + 12 + 1 + 1) * 2) - #endif /* __MACH_BF48_H__ */ diff --git a/include/asm-blackfin/mach-bf548/mem_map.h b/include/asm-blackfin/mach-bf548/mem_map.h index 72d80e8a6e8..ec1597e3183 100644 --- a/include/asm-blackfin/mach-bf548/mem_map.h +++ b/include/asm-blackfin/mach-bf548/mem_map.h @@ -51,10 +51,10 @@ /* Level 1 Memory */ /* Memory Map for ADSP-BF548 processors */ -#ifdef CONFIG_BLKFIN_ICACHE -#define BLKFIN_ICACHESIZE (16*1024) +#ifdef CONFIG_BFIN_ICACHE +#define BFIN_ICACHESIZE (16*1024) #else -#define BLKFIN_ICACHESIZE (0*1024) +#define BFIN_ICACHESIZE (0*1024) #endif #define L1_CODE_START 0xFFA00000 @@ -63,29 +63,29 @@ #define L1_CODE_LENGTH 0xC000 -#ifdef CONFIG_BLKFIN_DCACHE +#ifdef CONFIG_BFIN_DCACHE -#ifdef CONFIG_BLKFIN_DCACHE_BANKA +#ifdef CONFIG_BFIN_DCACHE_BANKA #define DMEM_CNTR (ACACHE_BSRAM | ENDCPLB | PORT_PREF0) #define L1_DATA_A_LENGTH (0x8000 - 0x4000) #define L1_DATA_B_LENGTH 0x8000 -#define BLKFIN_DCACHESIZE (16*1024) -#define BLKFIN_DSUPBANKS 1 +#define BFIN_DCACHESIZE (16*1024) +#define BFIN_DSUPBANKS 1 #else #define DMEM_CNTR (ACACHE_BCACHE | ENDCPLB | PORT_PREF0) #define L1_DATA_A_LENGTH (0x8000 - 0x4000) #define L1_DATA_B_LENGTH (0x8000 - 0x4000) -#define BLKFIN_DCACHESIZE (32*1024) -#define BLKFIN_DSUPBANKS 2 +#define BFIN_DCACHESIZE (32*1024) +#define BFIN_DSUPBANKS 2 #endif #else #define DMEM_CNTR (ASRAM_BSRAM | ENDCPLB | PORT_PREF0) #define L1_DATA_A_LENGTH 0x8000 #define L1_DATA_B_LENGTH 0x8000 -#define BLKFIN_DCACHESIZE (0*1024) -#define BLKFIN_DSUPBANKS 0 -#endif /*CONFIG_BLKFIN_DCACHE*/ +#define BFIN_DCACHESIZE (0*1024) +#define BFIN_DSUPBANKS 0 +#endif /*CONFIG_BFIN_DCACHE*/ /* Scratch Pad Memory */ diff --git a/include/asm-blackfin/mach-bf561/bf561.h b/include/asm-blackfin/mach-bf561/bf561.h index 53b650f3134..17e1d5dcef0 100644 --- a/include/asm-blackfin/mach-bf561/bf561.h +++ b/include/asm-blackfin/mach-bf561/bf561.h @@ -73,13 +73,13 @@ */ -#define BLKFIN_ISUBBANKS 4 -#define BLKFIN_IWAYS 4 -#define BLKFIN_ILINES 32 +#define BFIN_ISUBBANKS 4 +#define BFIN_IWAYS 4 +#define BFIN_ILINES 32 -#define BLKFIN_DSUBBANKS 4 -#define BLKFIN_DWAYS 2 -#define BLKFIN_DLINES 64 +#define BFIN_DSUBBANKS 4 +#define BFIN_DWAYS 2 +#define BFIN_DLINES 64 #define WAY0_L 0x1 #define WAY1_L 0x2 @@ -239,83 +239,4 @@ #define CPUID 0x0 #endif -#if (CONFIG_MEM_SIZE % 4) -#error "SDRAM memory size must be a multiple of 4MB!" -#endif -#define SDRAM_IGENERIC (CPLB_L1_CHBL | CPLB_USER_RD | CPLB_VALID | CPLB_PORTPRIO) -#define SDRAM_IKERNEL (SDRAM_IGENERIC | CPLB_LOCK) -#define L1_IMEMORY ( CPLB_USER_RD | CPLB_VALID | CPLB_LOCK) -#define SDRAM_INON_CHBL ( CPLB_USER_RD | CPLB_VALID) - -/*Use the menuconfig cache policy here - CONFIG_BLKFIN_WT/CONFIG_BLKFIN_WB*/ - -#define ANOMALY_05000158_WORKAROUND 0x200 -#ifdef CONFIG_BLKFIN_WB /*Write Back Policy */ -#define SDRAM_DGENERIC (CPLB_L1_CHBL | CPLB_DIRTY \ - | CPLB_SUPV_WR | CPLB_USER_WR | CPLB_USER_RD | CPLB_VALID | ANOMALY_05000158_WORKAROUND) -#else /*Write Through */ -#define SDRAM_DGENERIC (CPLB_L1_CHBL | CPLB_WT | CPLB_L1_AOW | CPLB_DIRTY \ - | CPLB_SUPV_WR | CPLB_USER_WR | CPLB_USER_RD | CPLB_VALID | ANOMALY_05000158_WORKAROUND) -#endif - - -#define L1_DMEMORY (CPLB_SUPV_WR | CPLB_USER_WR | CPLB_USER_RD | CPLB_VALID | ANOMALY_05000158_WORKAROUND | CPLB_LOCK | CPLB_DIRTY) -#define SDRAM_DNON_CHBL (CPLB_SUPV_WR | CPLB_USER_WR | CPLB_USER_RD | CPLB_VALID | ANOMALY_05000158_WORKAROUND | CPLB_DIRTY) -#define SDRAM_EBIU (CPLB_SUPV_WR | CPLB_USER_WR | CPLB_USER_RD | CPLB_VALID | ANOMALY_05000158_WORKAROUND | CPLB_DIRTY) -#define SDRAM_OOPS (CPLB_VALID | ANOMALY_05000158_WORKAROUND | CPLB_LOCK | CPLB_DIRTY) - -#define L2_MEMORY (CPLB_SUPV_WR | CPLB_USER_WR | CPLB_USER_RD | CPLB_VALID | ANOMALY_05000158_WORKAROUND | CPLB_DIRTY) - -#define SIZE_1K 0x00000400 /* 1K */ -#define SIZE_4K 0x00001000 /* 4K */ -#define SIZE_1M 0x00100000 /* 1M */ -#define SIZE_4M 0x00400000 /* 4M */ - -#define MAX_CPLBS (16 * 2) - -/* -* Number of required data CPLB switchtable entries -* MEMSIZE / 4 (we mostly install 4M page size CPLBs -* approx 16 for smaller 1MB page size CPLBs for allignment purposes -* 1 for L1 Data Memory -* 1 for L2 Data Memory -* 1 for CONFIG_DEBUG_HUNT_FOR_ZERO -* 64 for ASYNC Memory -*/ - - -#define MAX_SWITCH_D_CPLBS (((CONFIG_MEM_SIZE / 4) + 16 + 1 + 1 + 1 + 64) * 2) - -/* -* Number of required instruction CPLB switchtable entries -* MEMSIZE / 4 (we mostly install 4M page size CPLBs -* approx 12 for smaller 1MB page size CPLBs for allignment purposes -* 1 for L1 Instruction Memory -* 1 for L2 Instruction Memory -* 1 for CONFIG_DEBUG_HUNT_FOR_ZERO -*/ - -#define MAX_SWITCH_I_CPLBS (((CONFIG_MEM_SIZE / 4) + 12 + 1 + 1 + 1) * 2) - -#if 0 /* comment by mhfan */ -/* Event Vector Table Address */ -#define EVT_EMULATION_ADDR 0xffe02000 -#define EVT_RESET_ADDR 0xffe02004 -#define EVT_NMI_ADDR 0xffe02008 -#define EVT_EXCEPTION_ADDR 0xffe0200c -#define EVT_GLOBAL_INT_ENB_ADDR 0xffe02010 -#define EVT_HARDWARE_ERROR_ADDR 0xffe02014 -#define EVT_TIMER_ADDR 0xffe02018 -#define EVT_IVG7_ADDR 0xffe0201c -#define EVT_IVG8_ADDR 0xffe02020 -#define EVT_IVG9_ADDR 0xffe02024 -#define EVT_IVG10_ADDR 0xffe02028 -#define EVT_IVG11_ADDR 0xffe0202c -#define EVT_IVG12_ADDR 0xffe02030 -#define EVT_IVG13_ADDR 0xffe02034 -#define EVT_IVG14_ADDR 0xffe02038 -#define EVT_IVG15_ADDR 0xffe0203c -#define EVT_OVERRIDE_ADDR 0xffe02100 -#endif /* comment by mhfan */ - #endif /* __MACH_BF561_H__ */ diff --git a/include/asm-blackfin/mach-bf561/mem_map.h b/include/asm-blackfin/mach-bf561/mem_map.h index ebac9a8d838..f7ac09cf2c3 100644 --- a/include/asm-blackfin/mach-bf561/mem_map.h +++ b/include/asm-blackfin/mach-bf561/mem_map.h @@ -21,10 +21,10 @@ /* Level 1 Memory */ -#ifdef CONFIG_BLKFIN_CACHE -#define BLKFIN_ICACHESIZE (16*1024) +#ifdef CONFIG_BFIN_ICACHE +#define BFIN_ICACHESIZE (16*1024) #else -#define BLKFIN_ICACHESIZE (0*1024) +#define BFIN_ICACHESIZE (0*1024) #endif /* Memory Map for ADSP-BF561 processors */ @@ -36,29 +36,29 @@ #define L1_CODE_LENGTH 0x4000 -#ifdef CONFIG_BLKFIN_DCACHE +#ifdef CONFIG_BFIN_DCACHE -#ifdef CONFIG_BLKFIN_DCACHE_BANKA +#ifdef CONFIG_BFIN_DCACHE_BANKA #define DMEM_CNTR (ACACHE_BSRAM | ENDCPLB | PORT_PREF0) #define L1_DATA_A_LENGTH (0x8000 - 0x4000) #define L1_DATA_B_LENGTH 0x8000 -#define BLKFIN_DCACHESIZE (16*1024) -#define BLKFIN_DSUPBANKS 1 +#define BFIN_DCACHESIZE (16*1024) +#define BFIN_DSUPBANKS 1 #else #define DMEM_CNTR (ACACHE_BCACHE | ENDCPLB | PORT_PREF0) #define L1_DATA_A_LENGTH (0x8000 - 0x4000) #define L1_DATA_B_LENGTH (0x8000 - 0x4000) -#define BLKFIN_DCACHESIZE (32*1024) -#define BLKFIN_DSUPBANKS 2 +#define BFIN_DCACHESIZE (32*1024) +#define BFIN_DSUPBANKS 2 #endif #else #define DMEM_CNTR (ASRAM_BSRAM | ENDCPLB | PORT_PREF0) #define L1_DATA_A_LENGTH 0x8000 #define L1_DATA_B_LENGTH 0x8000 -#define BLKFIN_DCACHESIZE (0*1024) -#define BLKFIN_DSUPBANKS 0 -#endif /*CONFIG_BLKFIN_DCACHE*/ +#define BFIN_DCACHESIZE (0*1024) +#define BFIN_DSUPBANKS 0 +#endif /*CONFIG_BFIN_DCACHE*/ #endif /* Level 2 Memory */ diff --git a/include/asm-blackfin/mach-common/clocks.h b/include/asm-blackfin/mach-common/clocks.h index 5e8113ee893..033bba92d61 100644 --- a/include/asm-blackfin/mach-common/clocks.h +++ b/include/asm-blackfin/mach-common/clocks.h @@ -27,7 +27,8 @@ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ - +#ifndef _BFIN_CLOCKS_H +#define _BFIN_CLOCKS_H #ifdef CONFIG_CCLK_DIV_1 # define CONFIG_CCLK_ACT_DIV CCLK_DIV1 @@ -66,3 +67,4 @@ # define CONFIG_VCO_MULT 0 #endif +#endif diff --git a/include/asm-blackfin/mach-common/def_LPBlackfin.h b/include/asm-blackfin/mach-common/def_LPBlackfin.h index 260515d1528..c1d8c4a78fc 100644 --- a/include/asm-blackfin/mach-common/def_LPBlackfin.h +++ b/include/asm-blackfin/mach-common/def_LPBlackfin.h @@ -639,6 +639,7 @@ #define CPLB_USER_RD 0x00000004 /* 0=no read access, 1=read access * allowed (user mode) */ + #define PAGE_SIZE_1KB 0x00000000 /* 1 KB page size */ #define PAGE_SIZE_4KB 0x00010000 /* 4 KB page size */ #define PAGE_SIZE_1MB 0x00020000 /* 1 MB page size */ @@ -671,6 +672,8 @@ */ #define CPLB_WT 0x00004000 /* 0=write-back, 1=write-through */ +#define CPLB_ALL_ACCESS CPLB_SUPV_WR | CPLB_USER_RD | CPLB_USER_WR + /* TBUFCTL Masks */ #define TBUFPWR 0x0001 #define TBUFEN 0x0002 diff --git a/include/asm-blackfin/pgtable.h b/include/asm-blackfin/pgtable.h index 5a8f9e431c4..b11b114689c 100644 --- a/include/asm-blackfin/pgtable.h +++ b/include/asm-blackfin/pgtable.h @@ -4,7 +4,7 @@ #include #include -#include +#include typedef pte_t *pte_addr_t; /* diff --git a/include/asm-blackfin/system.h b/include/asm-blackfin/system.h index b03cf7d5b9a..2b3d47d0bbb 100644 --- a/include/asm-blackfin/system.h +++ b/include/asm-blackfin/system.h @@ -60,7 +60,7 @@ extern unsigned long irq_flags; ); \ } while (0) -#if ANOMALY_05000244 && defined(CONFIG_BLKFIN_CACHE) +#if ANOMALY_05000244 && defined(CONFIG_BFIN_ICACHE) # define NOP_PAD_ANOMALY_05000244 "nop; nop;" #else # define NOP_PAD_ANOMALY_05000244 -- cgit v1.2.3-70-g09d2 From b4055d733d58135371c0c3a7f8c8899ca7b4f658 Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Sun, 5 Aug 2007 14:00:11 +0800 Subject: Blackfin arch: remove spurious KERN_EMERG log level in output Signed-off-by: Mike Frysinger Signed-off-by: Bryan Wu --- arch/blackfin/kernel/traps.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/blackfin/kernel/traps.c b/arch/blackfin/kernel/traps.c index 0ec02fe663e..0d2052abe41 100644 --- a/arch/blackfin/kernel/traps.c +++ b/arch/blackfin/kernel/traps.c @@ -598,8 +598,7 @@ void dump_bfin_regs(struct pt_regs *fp, void *retaddr) unsigned short x = 0; for (; i < ((unsigned int)retaddr & 0xFFFFFFF0) + 32; i += 2) { if (!(i & 0xF)) - printk(KERN_EMERG "\n" KERN_EMERG - "0x%08x: ", i); + printk("\n" KERN_EMERG "0x%08x: ", i); if (get_user(x, (unsigned short *)i)) break; -- cgit v1.2.3-70-g09d2 From 2d8f161fe3d6f8d4a2a6f7d068757261b49191f7 Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Sun, 5 Aug 2007 14:06:16 +0800 Subject: Blackfin arch: update BOOT_LOAD update BOOT_LOAD help to reflect current state of the first 4k of our address space as well as add a memory range option to prevent invalid values Signed-off-by: Mike Frysinger Signed-off-by: Bryan Wu --- arch/blackfin/Kconfig | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig index 17f94692015..cdce8cc5b7b 100644 --- a/arch/blackfin/Kconfig +++ b/arch/blackfin/Kconfig @@ -476,15 +476,16 @@ config ENET_FLASH_PIN config BOOT_LOAD hex "Kernel load address for booting" default "0x1000" + range 0x1000 0x20000000 help This option allows you to set the load address of the kernel. This can be useful if you are on a board which has a small amount of memory or you wish to reserve some memory at the beginning of the address space. - Note that you generally want to keep this value at or above 4k - (0x1000) as this will allow the kernel to capture NULL pointer - references. + Note that you need to keep this value above 4k (0x1000) as this + memory region is used to capture NULL pointer references as well + as some core kernel functions. comment "LED Status Indicators" depends on (BFIN533_STAMP || BFIN533_BLUETECHNIX_CM) -- cgit v1.2.3-70-g09d2 From 8a26ac7043b0cb3b446ad9f9a3ec0992d0fea1f7 Mon Sep 17 00:00:00 2001 From: Sonic Zhang Date: Sun, 5 Aug 2007 16:14:58 +0800 Subject: Blackfin arch: Add DMA API to set curr descriptor address This API is necessary for DMA descriptor array mode. Signed-off-by: Sonic Zhang Signed-off-by: Bryan Wu --- arch/blackfin/kernel/bfin_dma_5xx.c | 15 ++++++++++++++- include/asm-blackfin/dma.h | 1 + 2 files changed, 15 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/blackfin/kernel/bfin_dma_5xx.c b/arch/blackfin/kernel/bfin_dma_5xx.c index 62f5a35c13e..f0db6c5c8d1 100644 --- a/arch/blackfin/kernel/bfin_dma_5xx.c +++ b/arch/blackfin/kernel/bfin_dma_5xx.c @@ -270,10 +270,23 @@ void set_dma_next_desc_addr(unsigned int channel, unsigned long addr) dma_ch[channel].regs->next_desc_ptr = addr; SSYNC(); - pr_debug("set_dma_start_addr() : END\n"); + pr_debug("set_dma_next_desc_addr() : END\n"); } EXPORT_SYMBOL(set_dma_next_desc_addr); +void set_dma_curr_desc_addr(unsigned int channel, unsigned long addr) +{ + pr_debug("set_dma_curr_desc_addr() : BEGIN \n"); + + BUG_ON(!(dma_ch[channel].chan_status != DMA_CHANNEL_FREE + && channel < MAX_BLACKFIN_DMA_CHANNEL)); + + dma_ch[channel].regs->curr_desc_ptr = addr; + SSYNC(); + pr_debug("set_dma_curr_desc_addr() : END\n"); +} +EXPORT_SYMBOL(set_dma_curr_desc_addr); + void set_dma_x_count(unsigned int channel, unsigned short x_count) { BUG_ON(!(dma_ch[channel].chan_status != DMA_CHANNEL_FREE diff --git a/include/asm-blackfin/dma.h b/include/asm-blackfin/dma.h index 4269082b154..b42a531e7a1 100644 --- a/include/asm-blackfin/dma.h +++ b/include/asm-blackfin/dma.h @@ -152,6 +152,7 @@ struct dma_channel { /* functions to set register mode */ void set_dma_start_addr(unsigned int channel, unsigned long addr); void set_dma_next_desc_addr(unsigned int channel, unsigned long addr); +void set_dma_curr_desc_addr(unsigned int channel, unsigned long addr); void set_dma_x_count(unsigned int channel, unsigned short x_count); void set_dma_x_modify(unsigned int channel, short x_modify); void set_dma_y_count(unsigned int channel, unsigned short y_count); -- cgit v1.2.3-70-g09d2 From 2615639758c0a9e0f0e14267c9cd2b83801eb8cf Mon Sep 17 00:00:00 2001 From: Jie Zhang Date: Sun, 5 Aug 2007 16:25:23 +0800 Subject: Blackfin arch: Allow ptrace access the fixed code. Signed-off-by: Jie Zhang Signed-off-by: Bryan Wu --- arch/blackfin/kernel/ptrace.c | 24 ++++++++++++++++++------ 1 file changed, 18 insertions(+), 6 deletions(-) (limited to 'arch') diff --git a/arch/blackfin/kernel/ptrace.c b/arch/blackfin/kernel/ptrace.c index ed800c7456d..64ce5fea860 100644 --- a/arch/blackfin/kernel/ptrace.c +++ b/arch/blackfin/kernel/ptrace.c @@ -44,6 +44,7 @@ #include #include #include +#include #define MAX_SHARED_LIBS 3 #define TEXT_OFFSET 0 @@ -169,6 +170,9 @@ static inline int is_user_addr_valid(struct task_struct *child, && start + len <= (unsigned long)sraml->addr + sraml->length) return 0; + if (start >= FIXED_CODE_START && start + len <= FIXED_CODE_END) + return 0; + return -EIO; } @@ -215,9 +219,13 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data) copied = sizeof(tmp); } else #endif - copied = - access_process_vm(child, addr + add, &tmp, - sizeof(tmp), 0); + if (addr + add >= FIXED_CODE_START + && addr + add + sizeof(tmp) <= FIXED_CODE_END) { + memcpy(&tmp, (const void *)(addr + add), sizeof(tmp)); + copied = sizeof(tmp); + } else + copied = access_process_vm(child, addr + add, &tmp, + sizeof(tmp), 0); pr_debug("ptrace: copied size %d [0x%08lx]\n", copied, tmp); if (copied != sizeof(tmp)) break; @@ -281,9 +289,13 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data) copied = sizeof(data); } else #endif - copied = - access_process_vm(child, addr + add, &data, - sizeof(data), 1); + if (addr + add >= FIXED_CODE_START + && addr + add + sizeof(data) <= FIXED_CODE_END) { + memcpy((void *)(addr + add), &data, sizeof(data)); + copied = sizeof(data); + } else + copied = access_process_vm(child, addr + add, &data, + sizeof(data), 1); pr_debug("ptrace: copied size %d\n", copied); if (copied != sizeof(data)) break; -- cgit v1.2.3-70-g09d2 From f0b5d12f2b3226c85258519d7725e63d9daf5e90 Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Sun, 5 Aug 2007 17:03:59 +0800 Subject: Blackfin arch: allow people to select the feature that is unavailable to the kernel - allow people to select the feature that is unavailable to the kernel: NMI, JTAG, or CYCLES. - change default NMI handler to simply dump hardware trace buffer. - remove default NMI handler completely as calling into kernel code is not safe move example handler to wiki so people dont haphazardly copy and paste this stuff thinking its safe Signed-off-by: Mike Frysinger Signed-off-by: Bryan Wu --- arch/blackfin/Kconfig | 46 ++++++++++++++++++++++++++++ arch/blackfin/kernel/irqchip.c | 3 +- arch/blackfin/mach-bf533/head.S | 10 +++--- arch/blackfin/mach-bf537/head.S | 10 +++--- arch/blackfin/mach-bf548/head.S | 10 ++++-- arch/blackfin/mach-bf561/head.S | 10 +++--- arch/blackfin/mach-common/entry.S | 18 ++++++++--- arch/blackfin/mach-common/interrupt.S | 28 +++++------------ arch/blackfin/mach-common/ints-priority-dc.c | 6 +++- arch/blackfin/mach-common/ints-priority-sc.c | 6 +++- include/asm-blackfin/irq_handler.h | 5 ++- 11 files changed, 107 insertions(+), 45 deletions(-) (limited to 'arch') diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig index cdce8cc5b7b..26ebb0e8c43 100644 --- a/arch/blackfin/Kconfig +++ b/arch/blackfin/Kconfig @@ -521,6 +521,52 @@ config BFIN_IDLE_LED_NUM help Select the LED (marked on the board) for you to blink. +choice + prompt "Blackfin Exception Scratch Register" + default BFIN_SCRATCH_REG_RETN + help + Select the resource to reserve for the Exception handler: + - RETN: Non-Maskable Interrupt (NMI) + - RETE: Exception Return (JTAG/ICE) + - CYCLES: Performance counter + + If you are unsure, please select "RETN". + +config BFIN_SCRATCH_REG_RETN + bool "RETN" + help + Use the RETN register in the Blackfin exception handler + as a stack scratch register. This means you cannot + safely use NMI on the Blackfin while running Linux, but + you can debug the system with a JTAG ICE and use the + CYCLES performance registers. + + If you are unsure, please select "RETN". + +config BFIN_SCRATCH_REG_RETE + bool "RETE" + help + Use the RETE register in the Blackfin exception handler + as a stack scratch register. This means you cannot + safely use a JTAG ICE while debugging a Blackfin board, + but you can safely use the CYCLES performance registers + and the NMI. + + If you are unsure, please select "RETN". + +config BFIN_SCRATCH_REG_CYCLES + bool "CYCLES" + help + Use the CYCLES register in the Blackfin exception handler + as a stack scratch register. This means you cannot + safely use the CYCLES performance registers on a Blackfin + board at anytime, but you can debug the system with a JTAG + ICE and use the NMI. + + If you are unsure, please select "RETN". + +endchoice + # # Sorry - but you need to put the hex address here - # diff --git a/arch/blackfin/kernel/irqchip.c b/arch/blackfin/kernel/irqchip.c index 462ae41144c..73647c15877 100644 --- a/arch/blackfin/kernel/irqchip.c +++ b/arch/blackfin/kernel/irqchip.c @@ -98,9 +98,8 @@ int show_interrupts(struct seq_file *p, void *v) */ #ifdef CONFIG_DO_IRQ_L1 -asmlinkage void asm_do_IRQ(unsigned int irq, struct pt_regs *regs)__attribute__((l1_text)); +__attribute__((l1_text)) #endif - asmlinkage void asm_do_IRQ(unsigned int irq, struct pt_regs *regs) { struct pt_regs *old_regs; diff --git a/arch/blackfin/mach-bf533/head.S b/arch/blackfin/mach-bf533/head.S index 1d5b9dbbbaa..3be6feefa8a 100644 --- a/arch/blackfin/mach-bf533/head.S +++ b/arch/blackfin/mach-bf533/head.S @@ -53,10 +53,12 @@ __INIT ENTRY(__start) /* R0: argument of command line string, passed from uboot, save it */ R7 = R0; - /* Set the SYSCFG register: - * Enable Cycle Counter and Nesting Of Interrupts (3rd Bit) - */ - R0 = 0x36; + /* Enable Cycle Counter and Nesting Of Interrupts */ +#ifdef CONFIG_BFIN_SCRATCH_REG_CYCLES + R0 = SYSCFG_SNEN; +#else + R0 = SYSCFG_SNEN | SYSCFG_CCEN; +#endif SYSCFG = R0; R0 = 0; diff --git a/arch/blackfin/mach-bf537/head.S b/arch/blackfin/mach-bf537/head.S index 6dbcb77c8d3..0836bfdcc6c 100644 --- a/arch/blackfin/mach-bf537/head.S +++ b/arch/blackfin/mach-bf537/head.S @@ -51,10 +51,12 @@ __INIT ENTRY(__start) /* R0: argument of command line string, passed from uboot, save it */ R7 = R0; - /* Set the SYSCFG register: - * Enable Cycle Counter and Nesting Of Interrupts (3rd Bit) - */ - R0 = 0x36; + /* Enable Cycle Counter and Nesting Of Interrupts */ +#ifdef CONFIG_BFIN_SCRATCH_REG_CYCLES + R0 = SYSCFG_SNEN; +#else + R0 = SYSCFG_SNEN | SYSCFG_CCEN; +#endif SYSCFG = R0; R0 = 0; diff --git a/arch/blackfin/mach-bf548/head.S b/arch/blackfin/mach-bf548/head.S index 4c7d49f4118..937fbef26a5 100644 --- a/arch/blackfin/mach-bf548/head.S +++ b/arch/blackfin/mach-bf548/head.S @@ -50,9 +50,13 @@ ENTRY(__start) ENTRY(__stext) /* R0: argument of command line string, passed from uboot, save it */ R7 = R0; - /* Set the SYSCFG register */ - R0 = 0x36; - SYSCFG = R0; /*Enable Cycle Counter and Nesting Of Interrupts(3rd Bit)*/ + /* Enable Cycle Counter and Nesting Of Interrupts */ +#ifdef CONFIG_BFIN_SCRATCH_REG_CYCLES + R0 = SYSCFG_SNEN; +#else + R0 = SYSCFG_SNEN | SYSCFG_CCEN; +#endif + SYSCFG = R0; R0 = 0; /* Clear Out All the data and pointer Registers*/ diff --git a/arch/blackfin/mach-bf561/head.S b/arch/blackfin/mach-bf561/head.S index 8c9f73b8e57..139f4cff801 100644 --- a/arch/blackfin/mach-bf561/head.S +++ b/arch/blackfin/mach-bf561/head.S @@ -51,10 +51,12 @@ __INIT ENTRY(__start) /* R0: argument of command line string, passed from uboot, save it */ R7 = R0; - /* Set the SYSCFG register: - * Enable Cycle Counter and Nesting Of Interrupts (3rd Bit) - */ - R0 = 0x36; + /* Enable Cycle Counter and Nesting Of Interrupts */ +#ifdef CONFIG_BFIN_SCRATCH_REG_CYCLES + R0 = SYSCFG_SNEN; +#else + R0 = SYSCFG_SNEN | SYSCFG_CCEN; +#endif SYSCFG = R0; R0 = 0; diff --git a/arch/blackfin/mach-common/entry.S b/arch/blackfin/mach-common/entry.S index ab278a72f28..2188f81c645 100644 --- a/arch/blackfin/mach-common/entry.S +++ b/arch/blackfin/mach-common/entry.S @@ -58,6 +58,14 @@ #include +#if defined(CONFIG_BFIN_SCRATCH_REG_RETN) +# define EX_SCRATCH_REG RETN +#elif defined(CONFIG_BFIN_SCRATCH_REG_RETE) +# define EX_SCRATCH_REG RETE +#else +# define EX_SCRATCH_REG CYCLES +#endif + #ifdef CONFIG_EXCPT_IRQ_SYSC_L1 .section .l1.text #else @@ -93,7 +101,7 @@ ENTRY(_ex_icplb) call __cplb_hdr; DEBUG_START_HWTRACE(p5, r7) RESTORE_ALL_SYS - SP = RETN; + SP = EX_SCRATCH_REG; rtx; ENDPROC(_ex_icplb) @@ -102,7 +110,7 @@ ENTRY(_ex_syscall) (R7:6,P5:4) = [sp++]; ASTAT = [sp++]; raise 15; /* invoked by TRAP #0, for sys call */ - sp = retn; + sp = EX_SCRATCH_REG; rtx ENDPROC(_ex_syscall) @@ -145,7 +153,7 @@ _return_from_exception: #endif (R7:6,P5:4) = [sp++]; ASTAT = [sp++]; - sp = retn; + sp = EX_SCRATCH_REG; rtx; ENDPROC(_ex_soft_bp) @@ -204,7 +212,7 @@ ENTRY(_ex_trap_c) DEBUG_START_HWTRACE(p5, r7) (R7:6,P5:4) = [sp++]; ASTAT = [sp++]; - SP = RETN; + SP = EX_SCRATCH_REG; raise 5; rtx; ENDPROC(_ex_trap_c) @@ -279,7 +287,7 @@ ENTRY(_trap) /* Exception: 4th entry into system event table(supervisor mode)*/ * covered by a CPLB. Switch to an exception stack; use RETN as a * scratch register (for want of a better option). */ - retn = sp; + EX_SCRATCH_REG = sp; sp.l = _exception_stack_top; sp.h = _exception_stack_top; /* Try to deal with syscalls quickly. */ diff --git a/arch/blackfin/mach-common/interrupt.S b/arch/blackfin/mach-common/interrupt.S index 1d5ba5e3d91..c6b32fe0f6e 100644 --- a/arch/blackfin/mach-common/interrupt.S +++ b/arch/blackfin/mach-common/interrupt.S @@ -177,27 +177,15 @@ ENTRY(_evt_ivhw) jump .Lcommon_restore_context; #endif -/* interrupt routine for evt2 - 2. This is NMI. */ -ENTRY(_evt_evt2) - SAVE_CONTEXT -#ifdef CONFIG_FRAME_POINTER - fp = 0; -#endif -#if ANOMALY_05000283 - cc = r7 == r7; - p5.h = 0xffc0; - p5.l = 0x0014; - if cc jump 1f; - r7.l = W[p5]; -1: -#endif - r0 = IRQ_NMI; - r1 = sp; - SP += -12; - call _asm_do_IRQ; - SP += 12; - RESTORE_CONTEXT +/* Interrupt routine for evt2 (NMI). + * We don't actually use this, so just return. + * For inner circle type details, please see: + * http://docs.blackfin.uclinux.org/doku.php?id=linux:nmi + */ +ENTRY(_evt_nmi) +.weak _evt_nmi rtn; +ENDPROC(_evt_nmi) /* interrupt routine for core timer - 6 */ ENTRY(_evt_timer) diff --git a/arch/blackfin/mach-common/ints-priority-dc.c b/arch/blackfin/mach-common/ints-priority-dc.c index 684d306ab6b..2db3546fc87 100644 --- a/arch/blackfin/mach-common/ints-priority-dc.c +++ b/arch/blackfin/mach-common/ints-priority-dc.c @@ -362,7 +362,11 @@ void __init init_exception_vectors(void) { SSYNC(); - bfin_write_EVT2(evt_evt2); + /* cannot program in software: + * evt0 - emulation (jtag) + * evt1 - reset + */ + bfin_write_EVT2(evt_nmi); bfin_write_EVT3(trap); bfin_write_EVT5(evt_ivhw); bfin_write_EVT6(evt_timer); diff --git a/arch/blackfin/mach-common/ints-priority-sc.c b/arch/blackfin/mach-common/ints-priority-sc.c index a2016af65eb..d3b7672b2b9 100644 --- a/arch/blackfin/mach-common/ints-priority-sc.c +++ b/arch/blackfin/mach-common/ints-priority-sc.c @@ -721,7 +721,11 @@ void __init init_exception_vectors(void) { SSYNC(); - bfin_write_EVT2(evt_evt2); + /* cannot program in software: + * evt0 - emulation (jtag) + * evt1 - reset + */ + bfin_write_EVT2(evt_nmi); bfin_write_EVT3(trap); bfin_write_EVT5(evt_ivhw); bfin_write_EVT6(evt_timer); diff --git a/include/asm-blackfin/irq_handler.h b/include/asm-blackfin/irq_handler.h index 6a768315bbf..f13cd73b096 100644 --- a/include/asm-blackfin/irq_handler.h +++ b/include/asm-blackfin/irq_handler.h @@ -1,12 +1,15 @@ #ifndef _IRQ_HANDLER_H #define _IRQ_HANDLER_H +#include +#include + /* BASE LEVEL interrupt handler routines */ asmlinkage void evt_exception(void); asmlinkage void trap(void); asmlinkage void evt_ivhw(void); asmlinkage void evt_timer(void); -asmlinkage void evt_evt2(void); +asmlinkage void evt_nmi(void); asmlinkage void evt_evt7(void); asmlinkage void evt_evt8(void); asmlinkage void evt_evt9(void); -- cgit v1.2.3-70-g09d2 From 1ffe6646babf8471714e649849ec2c9662bf410c Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Sun, 5 Aug 2007 17:14:04 +0800 Subject: Blackfin arch: add an exception request/free api add an exception request/free api similar to the interrupt request/fre api so people can utilize the free software based exceptions for their own purposes Signed-off-by: Mike Frysinger Signed-off-by: Bryan Wu --- arch/blackfin/kernel/traps.c | 38 ++++++++++++++++++++++++++++++++-- arch/blackfin/mach-common/entry.S | 42 ++++++++++++++++++++------------------ include/asm-blackfin/irq_handler.h | 8 ++++++++ 3 files changed, 66 insertions(+), 22 deletions(-) (limited to 'arch') diff --git a/arch/blackfin/kernel/traps.c b/arch/blackfin/kernel/traps.c index 0d2052abe41..1a8a5f171bc 100644 --- a/arch/blackfin/kernel/traps.c +++ b/arch/blackfin/kernel/traps.c @@ -51,8 +51,6 @@ void __init trap_init(void) CSYNC(); } -asmlinkage void trap_c(struct pt_regs *fp); - int kstack_depth_to_print = 48; #ifdef CONFIG_DEBUG_BFIN_HWTRACE_ON @@ -693,6 +691,42 @@ asmlinkage int sys_bfin_spinlock(int *spinlock) return ret; } +int bfin_request_exception(unsigned int exception, void (*handler)(void)) +{ + void (*curr_handler)(void); + + if (exception > 0x3F) + return -EINVAL; + + curr_handler = ex_table[exception]; + + if (curr_handler != ex_replaceable) + return -EBUSY; + + ex_table[exception] = handler; + + return 0; +} +EXPORT_SYMBOL(bfin_request_exception); + +int bfin_free_exception(unsigned int exception, void (*handler)(void)) +{ + void (*curr_handler)(void); + + if (exception > 0x3F) + return -EINVAL; + + curr_handler = ex_table[exception]; + + if (curr_handler != handler) + return -EBUSY; + + ex_table[exception] = ex_replaceable; + + return 0; +} +EXPORT_SYMBOL(bfin_free_exception); + void panic_cplb_error(int cplb_panic, struct pt_regs *fp) { switch (cplb_panic) { diff --git a/arch/blackfin/mach-common/entry.S b/arch/blackfin/mach-common/entry.S index 2188f81c645..3feca05694f 100644 --- a/arch/blackfin/mach-common/entry.S +++ b/arch/blackfin/mach-common/entry.S @@ -143,7 +143,7 @@ ENTRY(_ex_single_step) cc = r6 == r7; if !cc jump _ex_trap_c; -_return_from_exception: +ENTRY(_return_from_exception) DEBUG_START_HWTRACE(p5, r7) #if ANOMALY_05000257 R7=LC0; @@ -171,6 +171,9 @@ ENTRY(_handle_bad_cplb) [--sp] = ASTAT; [--sp] = (R7:6, P5:4); +ENTRY(_ex_replaceable) + nop; + ENTRY(_ex_trap_c) /* Call C code (trap_c) to handle the exception, which most * likely involves sending a signal to the current process. @@ -298,8 +301,8 @@ ENTRY(_trap) /* Exception: 4th entry into system event table(supervisor mode)*/ r6.l = lo(SEQSTAT_EXCAUSE); r6.h = hi(SEQSTAT_EXCAUSE); r7 = r7 & r6; - p5.h = _extable; - p5.l = _extable; + p5.h = _ex_table; + p5.l = _ex_table; p4 = r7; p5 = p5 + (p4 << 2); p4 = [p5]; @@ -818,28 +821,27 @@ ENTRY(_software_trace_buff) #else .data #endif -ALIGN -_extable: +ENTRY(_ex_table) /* entry for each EXCAUSE[5:0] * This table must be in sync with the table in ./kernel/traps.c * EXCPT instruction can provide 4 bits of EXCAUSE, allowing 16 to be user defined */ - .long _ex_syscall; /* 0x00 - User Defined - Linux Syscall */ + .long _ex_syscall /* 0x00 - User Defined - Linux Syscall */ .long _ex_soft_bp /* 0x01 - User Defined - Software breakpoint */ - .long _ex_trap_c /* 0x02 - User Defined */ + .long _ex_replaceable /* 0x02 - User Defined */ .long _ex_trap_c /* 0x03 - User Defined - userspace stack overflow */ - .long _ex_trap_c /* 0x04 - User Defined */ - .long _ex_trap_c /* 0x05 - User Defined */ - .long _ex_trap_c /* 0x06 - User Defined */ - .long _ex_trap_c /* 0x07 - User Defined */ - .long _ex_trap_c /* 0x08 - User Defined */ - .long _ex_trap_c /* 0x09 - User Defined */ - .long _ex_trap_c /* 0x0A - User Defined */ - .long _ex_trap_c /* 0x0B - User Defined */ - .long _ex_trap_c /* 0x0C - User Defined */ - .long _ex_trap_c /* 0x0D - User Defined */ - .long _ex_trap_c /* 0x0E - User Defined */ - .long _ex_trap_c /* 0x0F - User Defined */ + .long _ex_replaceable /* 0x04 - User Defined */ + .long _ex_replaceable /* 0x05 - User Defined */ + .long _ex_replaceable /* 0x06 - User Defined */ + .long _ex_replaceable /* 0x07 - User Defined */ + .long _ex_replaceable /* 0x08 - User Defined */ + .long _ex_replaceable /* 0x09 - User Defined */ + .long _ex_replaceable /* 0x0A - User Defined */ + .long _ex_replaceable /* 0x0B - User Defined */ + .long _ex_replaceable /* 0x0C - User Defined */ + .long _ex_replaceable /* 0x0D - User Defined */ + .long _ex_replaceable /* 0x0E - User Defined */ + .long _ex_replaceable /* 0x0F - User Defined */ .long _ex_single_step /* 0x10 - HW Single step */ #ifdef CONFIG_DEBUG_BFIN_HWTRACE_EXPAND .long _ex_trace_buff_full /* 0x11 - Trace Buffer Full */ @@ -893,8 +895,8 @@ _extable: .long _ex_trap_c /* 0x3D - Reserved */ .long _ex_trap_c /* 0x3E - Reserved */ .long _ex_trap_c /* 0x3F - Reserved */ +END(_ex_table) -ALIGN ENTRY(_sys_call_table) .long _sys_restart_syscall /* 0 */ .long _sys_exit diff --git a/include/asm-blackfin/irq_handler.h b/include/asm-blackfin/irq_handler.h index f13cd73b096..19534c133c9 100644 --- a/include/asm-blackfin/irq_handler.h +++ b/include/asm-blackfin/irq_handler.h @@ -20,5 +20,13 @@ asmlinkage void evt_evt13(void); asmlinkage void evt_soft_int1(void); asmlinkage void evt_system_call(void); asmlinkage void init_exception_buff(void); +asmlinkage void trap_c(struct pt_regs *fp); +asmlinkage void ex_replaceable(void); + +extern void *ex_table[]; +extern void return_from_exception(void); + +extern int bfin_request_exception(unsigned int exception, void (*handler)(void)); +extern int bfin_free_exception(unsigned int exception, void (*handler)(void)); #endif -- cgit v1.2.3-70-g09d2 From fbeb7370b6eef14bf12787d05c7460fae562d0be Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Mon, 27 Aug 2007 15:02:20 +0800 Subject: Blackfin arch: parse input sections properly when using -ffunction-sections/-fdata-sections Signed-off-by: Mike Frysinger Signed-off-by: Bryan Wu --- arch/blackfin/kernel/vmlinux.lds.S | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/blackfin/kernel/vmlinux.lds.S b/arch/blackfin/kernel/vmlinux.lds.S index fb53780247b..e40b66ae1b7 100644 --- a/arch/blackfin/kernel/vmlinux.lds.S +++ b/arch/blackfin/kernel/vmlinux.lds.S @@ -46,6 +46,7 @@ SECTIONS __text = .; _text = .; __stext = .; + *(.text.*) TEXT_TEXT SCHED_TEXT LOCK_TEXT @@ -73,6 +74,7 @@ SECTIONS . = ALIGN(THREAD_SIZE); *(.data.init_task) DATA_DATA + *(.data.*) CONSTRUCTORS . = ALIGN(32); @@ -164,7 +166,7 @@ SECTIONS { . = ALIGN(4); ___bss_start = .; - *(.bss) + *(.bss .bss.*) *(COMMON) . = ALIGN(4); ___bss_stop = .; -- cgit v1.2.3-70-g09d2 From d8350e704e5a47784d108d57c27dbb7b9c0a4369 Mon Sep 17 00:00:00 2001 From: Bryan Wu Date: Thu, 11 Oct 2007 00:03:39 +0800 Subject: Blackfin arch: Board defconfig updating Signed-off-by: Bryan Wu --- arch/blackfin/configs/BF533-EZKIT_defconfig | 231 ++++++-------- arch/blackfin/configs/BF533-STAMP_defconfig | 268 ++++++++-------- arch/blackfin/configs/BF537-STAMP_defconfig | 284 ++++++++--------- arch/blackfin/configs/BF548-EZKIT_defconfig | 468 +++++++++++++++++++--------- arch/blackfin/configs/BF561-EZKIT_defconfig | 211 +++++-------- arch/blackfin/configs/PNAV-10_defconfig | 284 ++++++++--------- 6 files changed, 901 insertions(+), 845 deletions(-) (limited to 'arch') diff --git a/arch/blackfin/configs/BF533-EZKIT_defconfig b/arch/blackfin/configs/BF533-EZKIT_defconfig index 02141827e59..57f58d5cd47 100644 --- a/arch/blackfin/configs/BF533-EZKIT_defconfig +++ b/arch/blackfin/configs/BF533-EZKIT_defconfig @@ -1,6 +1,6 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.21.5 +# Linux kernel version: 2.6.22.6 # # CONFIG_MMU is not set # CONFIG_FPU is not set @@ -15,8 +15,9 @@ CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y # CONFIG_GENERIC_TIME is not set -CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_GPIO=y CONFIG_FORCE_MAX_ZONEORDER=14 +CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_IRQCHIP_DEMUX_GPIO=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" @@ -40,7 +41,9 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_TASKSTATS is not set # CONFIG_UTS_NS is not set # CONFIG_AUDIT is not set -# CONFIG_IKCONFIG is not set +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=14 CONFIG_SYSFS_DEPRECATED=y # CONFIG_RELAY is not set CONFIG_BLK_DEV_INITRD=y @@ -58,15 +61,20 @@ CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_VM_EVENT_COUNTERS=y CONFIG_BIG_ORDER_ALLOC_NOFAIL_MAGIC=3 -CONFIG_BUDDY=y # CONFIG_NP2 is not set CONFIG_SLAB=y -CONFIG_VM_EVENT_COUNTERS=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set CONFIG_RT_MUTEXES=y CONFIG_TINY_SHMEM=y CONFIG_BASE_SMALL=0 -# CONFIG_SLOB is not set # # Loadable module support @@ -184,19 +192,17 @@ CONFIG_WDTIMER=13 # CONFIG_CMDLINE_BOOL is not set # -# Board Setup +# Clock/PLL Setup # CONFIG_CLKIN_HZ=27000000 -CONFIG_MEM_SIZE=32 -CONFIG_MEM_ADD_WIDTH=9 -CONFIG_BOOT_LOAD=0x1000 - -# -# Blackfin Kernel Optimizations -# +# CONFIG_BFIN_KERNEL_CLOCK is not set +CONFIG_MAX_VCO_HZ=750000000 +CONFIG_MIN_VCO_HZ=50000000 +CONFIG_MAX_SCLK_HZ=133000000 +CONFIG_MIN_SCLK_HZ=27000000 # -# Timer Tick +# Kernel Timer/Scheduler # # CONFIG_HZ_100 is not set CONFIG_HZ_250=y @@ -204,6 +210,20 @@ CONFIG_HZ_250=y # CONFIG_HZ_1000 is not set CONFIG_HZ=250 +# +# Memory Setup +# +CONFIG_MEM_SIZE=32 +CONFIG_MEM_ADD_WIDTH=9 +CONFIG_BOOT_LOAD=0x1000 +CONFIG_BFIN_SCRATCH_REG_RETN=y +# CONFIG_BFIN_SCRATCH_REG_RETE is not set +# CONFIG_BFIN_SCRATCH_REG_CYCLES is not set + +# +# Blackfin Kernel Optimizations +# + # # Memory Optimizations # @@ -251,11 +271,6 @@ CONFIG_BFIN_DCACHE=y CONFIG_BFIN_WT=y CONFIG_L1_MAX_PIECE=16 -# -# Clock Settings -# -# CONFIG_BFIN_KERNEL_CLOCK is not set - # # Asynchonous Memory Configuration # @@ -277,22 +292,19 @@ CONFIG_C_AMBEN_ALL=y CONFIG_BANK_0=0x7BB0 CONFIG_BANK_1=0x7BB0 CONFIG_BANK_2=0x7BB0 -CONFIG_BANK_3=0x99B3 +CONFIG_BANK_3=0xAAC3 # # Bus options (PCI, PCMCIA, EISA, MCA, ISA) # # CONFIG_PCI is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set # # PCCARD (PCMCIA/CardBus) support # # CONFIG_PCCARD is not set -# -# PCI Hotplug Support -# - # # Executable file formats # @@ -327,7 +339,6 @@ CONFIG_NET=y # # Networking options # -# CONFIG_NETDEBUG is not set CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -368,20 +379,8 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_NETLABEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set - -# -# DCCP Configuration (EXPERIMENTAL) -# # CONFIG_IP_DCCP is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# # CONFIG_IP_SCTP is not set - -# -# TIPC Configuration (EXPERIMENTAL) -# # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -448,7 +447,16 @@ CONFIG_IRTTY_SIR=m # FIR device drivers # # CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set # # Device Drivers @@ -466,10 +474,6 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # Connector - unified userspace <-> kernelspace linker # # CONFIG_CONNECTOR is not set - -# -# Memory Technology Devices (MTD) -# CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set # CONFIG_MTD_CONCAT is not set @@ -513,7 +517,6 @@ CONFIG_MTD_MW320D=m CONFIG_MTD_RAM=y CONFIG_MTD_ROM=m # CONFIG_MTD_ABSENT is not set -# CONFIG_MTD_OBSOLETE_CHIPS is not set # # Mapping drivers for chip access @@ -550,16 +553,13 @@ CONFIG_BFIN_FLASH_BANK_3=0x7BB0 # CONFIG_MTD_DOC2000 is not set # CONFIG_MTD_DOC2001 is not set # CONFIG_MTD_DOC2001PLUS is not set - -# -# NAND Flash Device Drivers -# # CONFIG_MTD_NAND is not set +# CONFIG_MTD_ONENAND is not set # -# OneNAND Flash Device Drivers +# UBI - Unsorted block images # -# CONFIG_MTD_ONENAND is not set +# CONFIG_MTD_UBI is not set # # Parallel port support @@ -587,10 +587,6 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 # # Misc devices # - -# -# ATA/ATAPI/MFM/RLL support -# # CONFIG_IDE is not set # @@ -599,10 +595,6 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 # CONFIG_RAID_ATTRS is not set # CONFIG_SCSI is not set # CONFIG_SCSI_NETLINK is not set - -# -# Serial ATA (prod) and Parallel ATA (experimental) drivers -# # CONFIG_ATA is not set # @@ -610,19 +602,6 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 # # CONFIG_MD is not set -# -# Fusion MPT device support -# -# CONFIG_FUSION is not set - -# -# IEEE 1394 (FireWire) support -# - -# -# I2O device support -# - # # Network device support # @@ -631,10 +610,6 @@ CONFIG_NETDEVICES=y # CONFIG_BONDING is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set - -# -# PHY device support -# # CONFIG_PHYLIB is not set # @@ -644,27 +619,15 @@ CONFIG_NET_ETHERNET=y CONFIG_MII=y CONFIG_SMC91X=y # CONFIG_SMSC911X is not set +# CONFIG_DM9000 is not set +CONFIG_NETDEV_1000=y +CONFIG_NETDEV_10000=y # -# Ethernet (1000 Mbit) -# - -# -# Ethernet (10000 Mbit) -# - -# -# Token Ring devices -# - -# -# Wireless LAN (non-hamradio) -# -# CONFIG_NET_RADIO is not set - -# -# Wan interfaces +# Wireless LAN # +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set # CONFIG_WAN is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set @@ -688,6 +651,7 @@ CONFIG_SMC91X=y # CONFIG_INPUT=m # CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set # # Userland interfaces @@ -704,6 +668,7 @@ CONFIG_INPUT_EVDEV=m # CONFIG_INPUT_KEYBOARD is not set # CONFIG_INPUT_MOUSE is not set # CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set # CONFIG_INPUT_TOUCHSCREEN is not set # CONFIG_INPUT_MISC is not set @@ -718,7 +683,7 @@ CONFIG_INPUT_EVDEV=m # # CONFIG_AD9960 is not set # CONFIG_SPI_ADC_BF533 is not set -# CONFIG_BF5xx_PFLAGS is not set +# CONFIG_BFIN_PFLAGS is not set # CONFIG_BF5xx_PPIFCD is not set # CONFIG_BF5xx_TIMERS is not set # CONFIG_BF5xx_PPI is not set @@ -758,10 +723,6 @@ CONFIG_UNIX98_PTYS=y # IPMI # # CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set @@ -773,7 +734,6 @@ CONFIG_BFIN_WDT=y CONFIG_HW_RANDOM=y # CONFIG_GEN_RTC is not set CONFIG_BLACKFIN_DPMC=y -# CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_RAW_DRIVER is not set @@ -781,10 +741,6 @@ CONFIG_BLACKFIN_DPMC=y # TPM devices # # CONFIG_TCG_TPM is not set - -# -# I2C support -# # CONFIG_I2C is not set # @@ -803,22 +759,22 @@ CONFIG_SPI_BFIN=y # SPI Protocol Masters # # CONFIG_SPI_AT25 is not set +# CONFIG_SPI_SPIDEV is not set # # Dallas's 1-wire bus # # CONFIG_W1 is not set - -# -# Hardware Monitoring support -# CONFIG_HWMON=y # CONFIG_HWMON_VID is not set # CONFIG_SENSORS_ABITUGURU is not set # CONFIG_SENSORS_F71805F is not set # CONFIG_SENSORS_LM70 is not set # CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_VT1211 is not set +# CONFIG_SENSORS_W83627HF is not set # CONFIG_HWMON_DEBUG_CHIP is not set # @@ -830,16 +786,19 @@ CONFIG_HWMON=y # Multimedia devices # # CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +CONFIG_DAB=y # -# Digital Video Broadcasting Devices +# Graphics support # -# CONFIG_DVB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # -# Graphics support +# Display device support # -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set +# CONFIG_DISPLAY_SUPPORT is not set +# CONFIG_VGASTATE is not set # CONFIG_FB is not set # @@ -862,18 +821,17 @@ CONFIG_USB_ARCH_HAS_HCD=y # CONFIG_USB is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# Enable Host or Gadget support to see Inventra options # # -# USB Gadget Support +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # -# CONFIG_USB_GADGET is not set # -# MMC/SD Card support +# USB Gadget Support # -# CONFIG_SPI_MMC is not set +# CONFIG_USB_GADGET is not set # CONFIG_MMC is not set # @@ -913,17 +871,29 @@ CONFIG_RTC_INTF_SYSFS=y CONFIG_RTC_INTF_PROC=y CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# I2C RTC drivers +# + +# +# SPI RTC drivers +# +# CONFIG_RTC_DRV_RS5C348 is not set +# CONFIG_RTC_DRV_MAX6902 is not set # -# RTC drivers +# Platform RTC drivers # # CONFIG_RTC_DRV_DS1553 is not set # CONFIG_RTC_DRV_DS1742 is not set -# CONFIG_RTC_DRV_RS5C348 is not set # CONFIG_RTC_DRV_M48T86 is not set -# CONFIG_RTC_DRV_TEST is not set -# CONFIG_RTC_DRV_MAX6902 is not set # CONFIG_RTC_DRV_V3020 is not set + +# +# on-CPU RTC drivers +# CONFIG_RTC_DRV_BFIN=y # @@ -939,14 +909,6 @@ CONFIG_RTC_DRV_BFIN=y # DMA Devices # -# -# Auxiliary Display support -# - -# -# Virtualization -# - # # PBX support # @@ -1047,6 +1009,7 @@ CONFIG_LOCKD=m CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=m +# CONFIG_SUNRPC_BIND34 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set CONFIG_SMB_FS=m @@ -1124,14 +1087,20 @@ CONFIG_NLS_DEFAULT="iso8859-1" CONFIG_ENABLE_MUST_CHECK=y # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set -# CONFIG_DEBUG_FS is not set +CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set -CONFIG_LOG_BUF_SHIFT=14 # CONFIG_DEBUG_BUGVERBOSE is not set -# CONFIG_DEBUG_SERIAL_EARLY_INIT is not set +CONFIG_DEBUG_MMRS=y CONFIG_DEBUG_HUNT_FOR_ZERO=y +CONFIG_DEBUG_BFIN_HWTRACE_ON=y +CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF=y +# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE is not set +# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_TWO is not set +CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=0 +# CONFIG_DEBUG_BFIN_HWTRACE_EXPAND is not set # CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE is not set +CONFIG_EARLY_PRINTK=y CONFIG_CPLB_INFO=y CONFIG_ACCESS_CHECK=y @@ -1154,6 +1123,7 @@ CONFIG_SECURITY_CAPABILITIES=m CONFIG_BITREVERSE=y CONFIG_CRC_CCITT=m # CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y @@ -1161,3 +1131,4 @@ CONFIG_ZLIB_DEFLATE=m CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/blackfin/configs/BF533-STAMP_defconfig b/arch/blackfin/configs/BF533-STAMP_defconfig index 3dbe22d7d90..306302baff0 100644 --- a/arch/blackfin/configs/BF533-STAMP_defconfig +++ b/arch/blackfin/configs/BF533-STAMP_defconfig @@ -1,6 +1,6 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.21.5 +# Linux kernel version: 2.6.22.6 # # CONFIG_MMU is not set # CONFIG_FPU is not set @@ -15,8 +15,9 @@ CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y # CONFIG_GENERIC_TIME is not set -CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_GPIO=y CONFIG_FORCE_MAX_ZONEORDER=14 +CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_IRQCHIP_DEMUX_GPIO=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" @@ -40,7 +41,9 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_TASKSTATS is not set # CONFIG_UTS_NS is not set # CONFIG_AUDIT is not set -# CONFIG_IKCONFIG is not set +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=14 CONFIG_SYSFS_DEPRECATED=y # CONFIG_RELAY is not set CONFIG_BLK_DEV_INITRD=y @@ -58,15 +61,20 @@ CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_VM_EVENT_COUNTERS=y CONFIG_BIG_ORDER_ALLOC_NOFAIL_MAGIC=3 -CONFIG_BUDDY=y # CONFIG_NP2 is not set CONFIG_SLAB=y -CONFIG_VM_EVENT_COUNTERS=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set CONFIG_RT_MUTEXES=y CONFIG_TINY_SHMEM=y CONFIG_BASE_SMALL=0 -# CONFIG_SLOB is not set # # Loadable module support @@ -185,9 +193,27 @@ CONFIG_WDTIMER=13 # CONFIG_CMDLINE_BOOL is not set # -# Board Setup +# Clock/PLL Setup # CONFIG_CLKIN_HZ=11059200 +# CONFIG_BFIN_KERNEL_CLOCK is not set +CONFIG_MAX_VCO_HZ=750000000 +CONFIG_MIN_VCO_HZ=50000000 +CONFIG_MAX_SCLK_HZ=133000000 +CONFIG_MIN_SCLK_HZ=27000000 + +# +# Kernel Timer/Scheduler +# +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_300 is not set +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 + +# +# Memory Setup +# CONFIG_MEM_SIZE=128 CONFIG_MEM_ADD_WIDTH=11 CONFIG_ENET_FLASH_PIN=0 @@ -198,6 +224,9 @@ CONFIG_BOOT_LOAD=0x1000 # # CONFIG_BFIN_ALIVE_LED is not set # CONFIG_BFIN_IDLE_LED is not set +CONFIG_BFIN_SCRATCH_REG_RETN=y +# CONFIG_BFIN_SCRATCH_REG_RETE is not set +# CONFIG_BFIN_SCRATCH_REG_CYCLES is not set CONFIG_BFIN_ALIVE_LED_PORT=0xFFC00700 CONFIG_BFIN_ALIVE_LED_DPORT=0xFFC00730 CONFIG_BFIN_IDLE_LED_PORT=0xFFC00700 @@ -207,15 +236,6 @@ CONFIG_BFIN_IDLE_LED_DPORT=0xFFC00730 # Blackfin Kernel Optimizations # -# -# Timer Tick -# -# CONFIG_HZ_100 is not set -CONFIG_HZ_250=y -# CONFIG_HZ_300 is not set -# CONFIG_HZ_1000 is not set -CONFIG_HZ=250 - # # Memory Optimizations # @@ -263,11 +283,6 @@ CONFIG_BFIN_DCACHE=y CONFIG_BFIN_WT=y CONFIG_L1_MAX_PIECE=16 -# -# Clock Settings -# -# CONFIG_BFIN_KERNEL_CLOCK is not set - # # Asynchonous Memory Configuration # @@ -289,22 +304,19 @@ CONFIG_C_AMBEN_ALL=y CONFIG_BANK_0=0x7BB0 CONFIG_BANK_1=0x7BB0 CONFIG_BANK_2=0x7BB0 -CONFIG_BANK_3=0x99B3 +CONFIG_BANK_3=0xAAC3 # # Bus options (PCI, PCMCIA, EISA, MCA, ISA) # # CONFIG_PCI is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set # # PCCARD (PCMCIA/CardBus) support # # CONFIG_PCCARD is not set -# -# PCI Hotplug Support -# - # # Executable file formats # @@ -339,7 +351,6 @@ CONFIG_NET=y # # Networking options # -# CONFIG_NETDEBUG is not set CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -380,20 +391,8 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_NETLABEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set - -# -# DCCP Configuration (EXPERIMENTAL) -# # CONFIG_IP_DCCP is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# # CONFIG_IP_SCTP is not set - -# -# TIPC Configuration (EXPERIMENTAL) -# # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -460,7 +459,16 @@ CONFIG_IRTTY_SIR=m # FIR device drivers # # CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set # # Device Drivers @@ -478,10 +486,6 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # Connector - unified userspace <-> kernelspace linker # # CONFIG_CONNECTOR is not set - -# -# Memory Technology Devices (MTD) -# CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set # CONFIG_MTD_CONCAT is not set @@ -525,7 +529,6 @@ CONFIG_MTD_MW320D=m CONFIG_MTD_RAM=y CONFIG_MTD_ROM=m # CONFIG_MTD_ABSENT is not set -# CONFIG_MTD_OBSOLETE_CHIPS is not set # # Mapping drivers for chip access @@ -562,16 +565,13 @@ CONFIG_BFIN_FLASH_BANK_3=0x7BB0 # CONFIG_MTD_DOC2000 is not set # CONFIG_MTD_DOC2001 is not set # CONFIG_MTD_DOC2001PLUS is not set - -# -# NAND Flash Device Drivers -# # CONFIG_MTD_NAND is not set +# CONFIG_MTD_ONENAND is not set # -# OneNAND Flash Device Drivers +# UBI - Unsorted block images # -# CONFIG_MTD_ONENAND is not set +# CONFIG_MTD_UBI is not set # # Parallel port support @@ -599,10 +599,6 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 # # Misc devices # - -# -# ATA/ATAPI/MFM/RLL support -# # CONFIG_IDE is not set # @@ -611,10 +607,6 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 # CONFIG_RAID_ATTRS is not set # CONFIG_SCSI is not set # CONFIG_SCSI_NETLINK is not set - -# -# Serial ATA (prod) and Parallel ATA (experimental) drivers -# # CONFIG_ATA is not set # @@ -622,19 +614,6 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 # # CONFIG_MD is not set -# -# Fusion MPT device support -# -# CONFIG_FUSION is not set - -# -# IEEE 1394 (FireWire) support -# - -# -# I2O device support -# - # # Network device support # @@ -643,10 +622,6 @@ CONFIG_NETDEVICES=y # CONFIG_BONDING is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set - -# -# PHY device support -# # CONFIG_PHYLIB is not set # @@ -656,27 +631,15 @@ CONFIG_NET_ETHERNET=y CONFIG_MII=y CONFIG_SMC91X=y # CONFIG_SMSC911X is not set +# CONFIG_DM9000 is not set +CONFIG_NETDEV_1000=y +CONFIG_NETDEV_10000=y # -# Ethernet (1000 Mbit) -# - -# -# Ethernet (10000 Mbit) -# - -# -# Token Ring devices -# - -# -# Wireless LAN (non-hamradio) -# -# CONFIG_NET_RADIO is not set - -# -# Wan interfaces +# Wireless LAN # +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set # CONFIG_WAN is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set @@ -700,6 +663,7 @@ CONFIG_SMC91X=y # CONFIG_INPUT=y # CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set # # Userland interfaces @@ -716,8 +680,14 @@ CONFIG_INPUT_EVDEV=m # CONFIG_INPUT_KEYBOARD is not set # CONFIG_INPUT_MOUSE is not set # CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set # CONFIG_INPUT_TOUCHSCREEN is not set CONFIG_INPUT_MISC=y +# CONFIG_INPUT_ATI_REMOTE is not set +# CONFIG_INPUT_ATI_REMOTE2 is not set +# CONFIG_INPUT_KEYSPAN_REMOTE is not set +# CONFIG_INPUT_POWERMATE is not set +# CONFIG_INPUT_YEALINK is not set # CONFIG_INPUT_UINPUT is not set # CONFIG_BF53X_PFBUTTONS is not set CONFIG_TWI_KEYPAD=m @@ -734,7 +704,7 @@ CONFIG_BFIN_TWIKEYPAD_IRQ_PFX=39 # # CONFIG_AD9960 is not set # CONFIG_SPI_ADC_BF533 is not set -# CONFIG_BF5xx_PFLAGS is not set +# CONFIG_BFIN_PFLAGS is not set # CONFIG_BF5xx_PPIFCD is not set # CONFIG_BF5xx_TIMERS is not set # CONFIG_BF5xx_PPI is not set @@ -777,10 +747,6 @@ CONFIG_UNIX98_PTYS=y # IPMI # # CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set @@ -792,7 +758,6 @@ CONFIG_BFIN_WDT=y CONFIG_HW_RANDOM=y # CONFIG_GEN_RTC is not set CONFIG_BLACKFIN_DPMC=y -# CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_RAW_DRIVER is not set @@ -800,11 +765,8 @@ CONFIG_BLACKFIN_DPMC=y # TPM devices # # CONFIG_TCG_TPM is not set - -# -# I2C support -# CONFIG_I2C=m +CONFIG_I2C_BOARDINFO=y CONFIG_I2C_CHARDEV=m # @@ -818,10 +780,11 @@ CONFIG_I2C_ALGOBIT=m # I2C Hardware Bus support # # CONFIG_I2C_BLACKFIN_GPIO is not set +# CONFIG_I2C_GPIO is not set # CONFIG_I2C_OCORES is not set # CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_SIMTEC is not set # CONFIG_I2C_STUB is not set -# CONFIG_I2C_PCA_ISA is not set # # Miscellaneous I2C Chip support @@ -857,18 +820,16 @@ CONFIG_SPI_BFIN=y # SPI Protocol Masters # # CONFIG_SPI_AT25 is not set +# CONFIG_SPI_SPIDEV is not set # # Dallas's 1-wire bus # # CONFIG_W1 is not set - -# -# Hardware Monitoring support -# CONFIG_HWMON=y # CONFIG_HWMON_VID is not set # CONFIG_SENSORS_ABITUGURU is not set +# CONFIG_SENSORS_AD7418 is not set # CONFIG_SENSORS_ADM1021 is not set # CONFIG_SENSORS_ADM1025 is not set # CONFIG_SENSORS_ADM1026 is not set @@ -896,6 +857,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_LM90 is not set # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_MAX1619 is not set +# CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_PC87427 is not set # CONFIG_SENSORS_SMSC47M1 is not set @@ -920,22 +882,30 @@ CONFIG_HWMON=y # Multimedia devices # # CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +CONFIG_DAB=y # -# Digital Video Broadcasting Devices +# Graphics support # -# CONFIG_DVB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # -# Graphics support +# Display device support # -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set +# CONFIG_DISPLAY_SUPPORT is not set +# CONFIG_VGASTATE is not set CONFIG_FB=m CONFIG_FIRMWARE_EDID=y # CONFIG_FB_DDC is not set CONFIG_FB_CFB_FILLRECT=m CONFIG_FB_CFB_COPYAREA=m CONFIG_FB_CFB_IMAGEBLIT=m +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_SYS_FOPS is not set +CONFIG_FB_DEFERRED_IO=y # CONFIG_FB_SVGALIB is not set # CONFIG_FB_MACMODES is not set # CONFIG_FB_BACKLIGHT is not set @@ -957,10 +927,6 @@ CONFIG_ADV7393_1XMEM=y # CONFIG_ADV7393_2XMEM is not set # CONFIG_FB_S1D13XXX is not set # CONFIG_FB_VIRTUAL is not set - -# -# Logo configuration -# # CONFIG_LOGO is not set # @@ -1001,7 +967,6 @@ CONFIG_SND_BLACKFIN_AD1836_TDM=y # CONFIG_SND_BLACKFIN_AD1836_I2S is not set CONFIG_SND_BLACKFIN_AD1836_MULSUB=y # CONFIG_SND_BLACKFIN_AD1836_5P1 is not set -CONFIG_SND_BLACKFIN_AD1981B=m CONFIG_SND_BLACKFIN_SPORT=0 CONFIG_SND_BLACKFIN_SPI_PFBIT=4 CONFIG_SND_BFIN_AD73311=m @@ -1009,10 +974,15 @@ CONFIG_SND_BFIN_SPORT=0 CONFIG_SND_BFIN_AD73311_SE=4 # -# SoC audio support +# System on Chip audio support # # CONFIG_SND_SOC is not set +# +# SoC Audio for the ADI Blackfin +# +# CONFIG_SND_BF5XX_HAVE_COLD_RESET is not set + # # Open Sound System # @@ -1033,18 +1003,17 @@ CONFIG_USB_ARCH_HAS_HCD=y # CONFIG_USB is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# Enable Host or Gadget support to see Inventra options # # -# USB Gadget Support +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # -# CONFIG_USB_GADGET is not set # -# MMC/SD Card support +# USB Gadget Support # -# CONFIG_SPI_MMC is not set +# CONFIG_USB_GADGET is not set # CONFIG_MMC is not set # @@ -1084,44 +1053,50 @@ CONFIG_RTC_INTF_SYSFS=y CONFIG_RTC_INTF_PROC=y CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set # -# RTC drivers +# I2C RTC drivers # -# CONFIG_RTC_DRV_X1205 is not set # CONFIG_RTC_DRV_DS1307 is not set -# CONFIG_RTC_DRV_DS1553 is not set -# CONFIG_RTC_DRV_ISL1208 is not set # CONFIG_RTC_DRV_DS1672 is not set -# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_MAX6900 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_X1205 is not set # CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_PCF8583 is not set + +# +# SPI RTC drivers +# # CONFIG_RTC_DRV_RS5C348 is not set -# CONFIG_RTC_DRV_RS5C372 is not set -# CONFIG_RTC_DRV_M48T86 is not set -# CONFIG_RTC_DRV_TEST is not set # CONFIG_RTC_DRV_MAX6902 is not set -# CONFIG_RTC_DRV_V3020 is not set -CONFIG_RTC_DRV_BFIN=y # -# DMA Engine support +# Platform RTC drivers # -# CONFIG_DMA_ENGINE is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_V3020 is not set # -# DMA Clients +# on-CPU RTC drivers # +CONFIG_RTC_DRV_BFIN=y # -# DMA Devices +# DMA Engine support # +# CONFIG_DMA_ENGINE is not set # -# Auxiliary Display support +# DMA Clients # # -# Virtualization +# DMA Devices # # @@ -1224,6 +1199,7 @@ CONFIG_LOCKD=m CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=m +# CONFIG_SUNRPC_BIND34 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set CONFIG_SMB_FS=m @@ -1301,14 +1277,20 @@ CONFIG_NLS_DEFAULT="iso8859-1" CONFIG_ENABLE_MUST_CHECK=y # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set -# CONFIG_DEBUG_FS is not set +CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set -CONFIG_LOG_BUF_SHIFT=14 # CONFIG_DEBUG_BUGVERBOSE is not set -# CONFIG_DEBUG_SERIAL_EARLY_INIT is not set +CONFIG_DEBUG_MMRS=y CONFIG_DEBUG_HUNT_FOR_ZERO=y +CONFIG_DEBUG_BFIN_HWTRACE_ON=y +CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF=y +# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE is not set +# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_TWO is not set +CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=0 +# CONFIG_DEBUG_BFIN_HWTRACE_EXPAND is not set # CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE is not set +CONFIG_EARLY_PRINTK=y CONFIG_CPLB_INFO=y CONFIG_ACCESS_CHECK=y @@ -1331,6 +1313,7 @@ CONFIG_SECURITY_CAPABILITIES=m CONFIG_BITREVERSE=y CONFIG_CRC_CCITT=m # CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y @@ -1338,3 +1321,4 @@ CONFIG_ZLIB_DEFLATE=m CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/blackfin/configs/BF537-STAMP_defconfig b/arch/blackfin/configs/BF537-STAMP_defconfig index a28e0316e90..828b604438e 100644 --- a/arch/blackfin/configs/BF537-STAMP_defconfig +++ b/arch/blackfin/configs/BF537-STAMP_defconfig @@ -1,6 +1,6 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.21.5 +# Linux kernel version: 2.6.22.6 # # CONFIG_MMU is not set # CONFIG_FPU is not set @@ -15,8 +15,9 @@ CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y # CONFIG_GENERIC_TIME is not set -CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_GPIO=y CONFIG_FORCE_MAX_ZONEORDER=14 +CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_IRQCHIP_DEMUX_GPIO=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" @@ -40,7 +41,9 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_TASKSTATS is not set # CONFIG_UTS_NS is not set # CONFIG_AUDIT is not set -# CONFIG_IKCONFIG is not set +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=14 CONFIG_SYSFS_DEPRECATED=y # CONFIG_RELAY is not set CONFIG_BLK_DEV_INITRD=y @@ -58,15 +61,20 @@ CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_VM_EVENT_COUNTERS=y CONFIG_BIG_ORDER_ALLOC_NOFAIL_MAGIC=3 -CONFIG_BUDDY=y # CONFIG_NP2 is not set CONFIG_SLAB=y -CONFIG_VM_EVENT_COUNTERS=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set CONFIG_RT_MUTEXES=y CONFIG_TINY_SHMEM=y CONFIG_BASE_SMALL=0 -# CONFIG_SLOB is not set # # Loadable module support @@ -147,13 +155,6 @@ CONFIG_IRQ_PLL_WAKEUP=7 # BF537 Specific Configuration # -# -# PORT F/G Selection -# -CONFIG_BF537_PORT_F=y -# CONFIG_BF537_PORT_G is not set -# CONFIG_BF537_PORT_H is not set - # # Interrupt Priority Assignment # @@ -199,19 +200,17 @@ CONFIG_IRQ_WATCH=13 # CONFIG_CMDLINE_BOOL is not set # -# Board Setup +# Clock/PLL Setup # CONFIG_CLKIN_HZ=25000000 -CONFIG_MEM_SIZE=64 -CONFIG_MEM_ADD_WIDTH=10 -CONFIG_BOOT_LOAD=0x1000 - -# -# Blackfin Kernel Optimizations -# +# CONFIG_BFIN_KERNEL_CLOCK is not set +CONFIG_MAX_VCO_HZ=600000000 +CONFIG_MIN_VCO_HZ=50000000 +CONFIG_MAX_SCLK_HZ=133000000 +CONFIG_MIN_SCLK_HZ=27000000 # -# Timer Tick +# Kernel Timer/Scheduler # # CONFIG_HZ_100 is not set CONFIG_HZ_250=y @@ -219,6 +218,20 @@ CONFIG_HZ_250=y # CONFIG_HZ_1000 is not set CONFIG_HZ=250 +# +# Memory Setup +# +CONFIG_MEM_SIZE=64 +CONFIG_MEM_ADD_WIDTH=10 +CONFIG_BOOT_LOAD=0x1000 +CONFIG_BFIN_SCRATCH_REG_RETN=y +# CONFIG_BFIN_SCRATCH_REG_RETE is not set +# CONFIG_BFIN_SCRATCH_REG_CYCLES is not set + +# +# Blackfin Kernel Optimizations +# + # # Memory Optimizations # @@ -266,11 +279,6 @@ CONFIG_BFIN_DCACHE=y CONFIG_BFIN_WT=y CONFIG_L1_MAX_PIECE=16 -# -# Clock Settings -# -# CONFIG_BFIN_KERNEL_CLOCK is not set - # # Asynchonous Memory Configuration # @@ -298,16 +306,13 @@ CONFIG_BANK_3=0x99B3 # Bus options (PCI, PCMCIA, EISA, MCA, ISA) # # CONFIG_PCI is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set # # PCCARD (PCMCIA/CardBus) support # # CONFIG_PCCARD is not set -# -# PCI Hotplug Support -# - # # Executable file formats # @@ -342,7 +347,6 @@ CONFIG_NET=y # # Networking options # -# CONFIG_NETDEBUG is not set CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -383,20 +387,8 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_NETLABEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set - -# -# DCCP Configuration (EXPERIMENTAL) -# # CONFIG_IP_DCCP is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# # CONFIG_IP_SCTP is not set - -# -# TIPC Configuration (EXPERIMENTAL) -# # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -463,7 +455,16 @@ CONFIG_IRTTY_SIR=m # FIR device drivers # # CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set # # Device Drivers @@ -481,10 +482,6 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # Connector - unified userspace <-> kernelspace linker # # CONFIG_CONNECTOR is not set - -# -# Memory Technology Devices (MTD) -# CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set # CONFIG_MTD_CONCAT is not set @@ -528,7 +525,6 @@ CONFIG_MTD_MW320D=m CONFIG_MTD_RAM=y CONFIG_MTD_ROM=m # CONFIG_MTD_ABSENT is not set -# CONFIG_MTD_OBSOLETE_CHIPS is not set # # Mapping drivers for chip access @@ -565,13 +561,10 @@ CONFIG_BFIN_FLASH_BANK_3=0x7BB0 # CONFIG_MTD_DOC2000 is not set # CONFIG_MTD_DOC2001 is not set # CONFIG_MTD_DOC2001PLUS is not set - -# -# NAND Flash Device Drivers -# CONFIG_MTD_NAND=m # CONFIG_MTD_NAND_VERIFY_WRITE is not set # CONFIG_MTD_NAND_ECC_SMC is not set +# CONFIG_MTD_NAND_MUSEUM_IDS is not set CONFIG_MTD_NAND_BFIN=m CONFIG_BFIN_NAND_BASE=0x20212000 CONFIG_BFIN_NAND_CLE=2 @@ -580,11 +573,13 @@ CONFIG_BFIN_NAND_READY=3 CONFIG_MTD_NAND_IDS=m # CONFIG_MTD_NAND_DISKONCHIP is not set # CONFIG_MTD_NAND_NANDSIM is not set +# CONFIG_MTD_NAND_PLATFORM is not set +# CONFIG_MTD_ONENAND is not set # -# OneNAND Flash Device Drivers +# UBI - Unsorted block images # -# CONFIG_MTD_ONENAND is not set +# CONFIG_MTD_UBI is not set # # Parallel port support @@ -612,10 +607,6 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 # # Misc devices # - -# -# ATA/ATAPI/MFM/RLL support -# # CONFIG_IDE is not set # @@ -624,10 +615,6 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 # CONFIG_RAID_ATTRS is not set # CONFIG_SCSI is not set # CONFIG_SCSI_NETLINK is not set - -# -# Serial ATA (prod) and Parallel ATA (experimental) drivers -# # CONFIG_ATA is not set # @@ -635,19 +622,6 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 # # CONFIG_MD is not set -# -# Fusion MPT device support -# -# CONFIG_FUSION is not set - -# -# IEEE 1394 (FireWire) support -# - -# -# I2O device support -# - # # Network device support # @@ -656,11 +630,20 @@ CONFIG_NETDEVICES=y # CONFIG_BONDING is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set +CONFIG_PHYLIB=y # -# PHY device support +# MII PHY device drivers # -# CONFIG_PHYLIB is not set +# CONFIG_MARVELL_PHY is not set +# CONFIG_DAVICOM_PHY is not set +# CONFIG_QSEMI_PHY is not set +# CONFIG_LXT_PHY is not set +# CONFIG_CICADA_PHY is not set +# CONFIG_VITESSE_PHY is not set +CONFIG_SMSC_PHY=y +# CONFIG_BROADCOM_PHY is not set +# CONFIG_FIXED_PHY is not set # # Ethernet (10 or 100Mbit) @@ -674,27 +657,15 @@ CONFIG_BFIN_TX_DESC_NUM=10 CONFIG_BFIN_RX_DESC_NUM=20 # CONFIG_BFIN_MAC_RMII is not set # CONFIG_SMSC911X is not set +# CONFIG_DM9000 is not set +CONFIG_NETDEV_1000=y +CONFIG_NETDEV_10000=y # -# Ethernet (1000 Mbit) -# - -# -# Ethernet (10000 Mbit) -# - -# -# Token Ring devices -# - -# -# Wireless LAN (non-hamradio) -# -# CONFIG_NET_RADIO is not set - -# -# Wan interfaces +# Wireless LAN # +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set # CONFIG_WAN is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set @@ -718,6 +689,7 @@ CONFIG_BFIN_RX_DESC_NUM=20 # CONFIG_INPUT=y # CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set # # Userland interfaces @@ -734,8 +706,14 @@ CONFIG_INPUT_EVDEV=m # CONFIG_INPUT_KEYBOARD is not set # CONFIG_INPUT_MOUSE is not set # CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set # CONFIG_INPUT_TOUCHSCREEN is not set CONFIG_INPUT_MISC=y +# CONFIG_INPUT_ATI_REMOTE is not set +# CONFIG_INPUT_ATI_REMOTE2 is not set +# CONFIG_INPUT_KEYSPAN_REMOTE is not set +# CONFIG_INPUT_POWERMATE is not set +# CONFIG_INPUT_YEALINK is not set # CONFIG_INPUT_UINPUT is not set # CONFIG_BF53X_PFBUTTONS is not set CONFIG_TWI_KEYPAD=m @@ -752,7 +730,7 @@ CONFIG_BFIN_TWIKEYPAD_IRQ_PFX=72 # # CONFIG_AD9960 is not set # CONFIG_SPI_ADC_BF533 is not set -# CONFIG_BF5xx_PFLAGS is not set +# CONFIG_BFIN_PFLAGS is not set # CONFIG_BF5xx_PPIFCD is not set # CONFIG_BF5xx_TIMERS is not set # CONFIG_BF5xx_PPI is not set @@ -803,10 +781,6 @@ CONFIG_CAN_BLACKFIN=m # IPMI # # CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set @@ -818,7 +792,6 @@ CONFIG_BFIN_WDT=y CONFIG_HW_RANDOM=y # CONFIG_GEN_RTC is not set CONFIG_BLACKFIN_DPMC=y -# CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_RAW_DRIVER is not set @@ -826,11 +799,8 @@ CONFIG_BLACKFIN_DPMC=y # TPM devices # # CONFIG_TCG_TPM is not set - -# -# I2C support -# CONFIG_I2C=m +CONFIG_I2C_BOARDINFO=y CONFIG_I2C_CHARDEV=m # @@ -846,10 +816,11 @@ CONFIG_I2C_CHARDEV=m # CONFIG_I2C_BLACKFIN_GPIO is not set CONFIG_I2C_BLACKFIN_TWI=m CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=50 +# CONFIG_I2C_GPIO is not set # CONFIG_I2C_OCORES is not set # CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_SIMTEC is not set # CONFIG_I2C_STUB is not set -# CONFIG_I2C_PCA_ISA is not set # # Miscellaneous I2C Chip support @@ -885,18 +856,16 @@ CONFIG_SPI_BFIN=y # SPI Protocol Masters # # CONFIG_SPI_AT25 is not set +# CONFIG_SPI_SPIDEV is not set # # Dallas's 1-wire bus # # CONFIG_W1 is not set - -# -# Hardware Monitoring support -# CONFIG_HWMON=y # CONFIG_HWMON_VID is not set # CONFIG_SENSORS_ABITUGURU is not set +# CONFIG_SENSORS_AD7418 is not set # CONFIG_SENSORS_ADM1021 is not set # CONFIG_SENSORS_ADM1025 is not set # CONFIG_SENSORS_ADM1026 is not set @@ -924,6 +893,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_LM90 is not set # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_MAX1619 is not set +# CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_PC87427 is not set # CONFIG_SENSORS_SMSC47M1 is not set @@ -948,11 +918,8 @@ CONFIG_HWMON=y # Multimedia devices # # CONFIG_VIDEO_DEV is not set - -# -# Digital Video Broadcasting Devices -# -# CONFIG_DVB is not set +# CONFIG_DVB_CORE is not set +CONFIG_DAB=y # # Graphics support @@ -960,12 +927,23 @@ CONFIG_HWMON=y CONFIG_BACKLIGHT_LCD_SUPPORT=y CONFIG_BACKLIGHT_CLASS_DEVICE=m CONFIG_LCD_CLASS_DEVICE=m + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set +# CONFIG_VGASTATE is not set CONFIG_FB=m CONFIG_FIRMWARE_EDID=y # CONFIG_FB_DDC is not set CONFIG_FB_CFB_FILLRECT=m CONFIG_FB_CFB_COPYAREA=m CONFIG_FB_CFB_IMAGEBLIT=m +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_SYS_FOPS is not set +CONFIG_FB_DEFERRED_IO=y # CONFIG_FB_SVGALIB is not set # CONFIG_FB_MACMODES is not set # CONFIG_FB_BACKLIGHT is not set @@ -991,10 +969,6 @@ CONFIG_LQ035_SLAVE_ADDR=0x58 # CONFIG_FB_BFIN_BGR is not set # CONFIG_FB_S1D13XXX is not set # CONFIG_FB_VIRTUAL is not set - -# -# Logo configuration -# # CONFIG_LOGO is not set # @@ -1035,7 +1009,6 @@ CONFIG_SND_BLACKFIN_AD1836_TDM=y # CONFIG_SND_BLACKFIN_AD1836_I2S is not set CONFIG_SND_BLACKFIN_AD1836_MULSUB=y # CONFIG_SND_BLACKFIN_AD1836_5P1 is not set -CONFIG_SND_BLACKFIN_AD1981B=m CONFIG_SND_BLACKFIN_SPORT=0 CONFIG_SND_BLACKFIN_SPI_PFBIT=4 CONFIG_SND_BFIN_AD73311=m @@ -1043,10 +1016,15 @@ CONFIG_SND_BFIN_SPORT=0 CONFIG_SND_BFIN_AD73311_SE=4 # -# SoC audio support +# System on Chip audio support # # CONFIG_SND_SOC is not set +# +# SoC Audio for the ADI Blackfin +# +# CONFIG_SND_BF5XX_HAVE_COLD_RESET is not set + # # Open Sound System # @@ -1067,18 +1045,17 @@ CONFIG_USB_ARCH_HAS_HCD=y # CONFIG_USB is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# Enable Host or Gadget support to see Inventra options # # -# USB Gadget Support +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # -# CONFIG_USB_GADGET is not set # -# MMC/SD Card support +# USB Gadget Support # -# CONFIG_SPI_MMC is not set +# CONFIG_USB_GADGET is not set # CONFIG_MMC is not set # @@ -1118,44 +1095,50 @@ CONFIG_RTC_INTF_SYSFS=y CONFIG_RTC_INTF_PROC=y CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set # -# RTC drivers +# I2C RTC drivers # -# CONFIG_RTC_DRV_X1205 is not set # CONFIG_RTC_DRV_DS1307 is not set -# CONFIG_RTC_DRV_DS1553 is not set -# CONFIG_RTC_DRV_ISL1208 is not set # CONFIG_RTC_DRV_DS1672 is not set -# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_MAX6900 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_X1205 is not set # CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_PCF8583 is not set + +# +# SPI RTC drivers +# # CONFIG_RTC_DRV_RS5C348 is not set -# CONFIG_RTC_DRV_RS5C372 is not set -# CONFIG_RTC_DRV_M48T86 is not set -# CONFIG_RTC_DRV_TEST is not set # CONFIG_RTC_DRV_MAX6902 is not set -# CONFIG_RTC_DRV_V3020 is not set -CONFIG_RTC_DRV_BFIN=y # -# DMA Engine support +# Platform RTC drivers # -# CONFIG_DMA_ENGINE is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_V3020 is not set # -# DMA Clients +# on-CPU RTC drivers # +CONFIG_RTC_DRV_BFIN=y # -# DMA Devices +# DMA Engine support # +# CONFIG_DMA_ENGINE is not set # -# Auxiliary Display support +# DMA Clients # # -# Virtualization +# DMA Devices # # @@ -1258,6 +1241,7 @@ CONFIG_LOCKD=m CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=m +# CONFIG_SUNRPC_BIND34 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set CONFIG_SMB_FS=m @@ -1335,14 +1319,20 @@ CONFIG_NLS_DEFAULT="iso8859-1" CONFIG_ENABLE_MUST_CHECK=y # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set -# CONFIG_DEBUG_FS is not set +CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set -CONFIG_LOG_BUF_SHIFT=14 # CONFIG_DEBUG_BUGVERBOSE is not set -# CONFIG_DEBUG_SERIAL_EARLY_INIT is not set +CONFIG_DEBUG_MMRS=y CONFIG_DEBUG_HUNT_FOR_ZERO=y +CONFIG_DEBUG_BFIN_HWTRACE_ON=y +CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF=y +# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE is not set +# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_TWO is not set +CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=0 +# CONFIG_DEBUG_BFIN_HWTRACE_EXPAND is not set # CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE is not set +CONFIG_EARLY_PRINTK=y CONFIG_CPLB_INFO=y CONFIG_ACCESS_CHECK=y @@ -1365,6 +1355,7 @@ CONFIG_SECURITY_CAPABILITIES=m CONFIG_BITREVERSE=y CONFIG_CRC_CCITT=m # CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y @@ -1372,3 +1363,4 @@ CONFIG_ZLIB_DEFLATE=m CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/blackfin/configs/BF548-EZKIT_defconfig b/arch/blackfin/configs/BF548-EZKIT_defconfig index 8f3b1de6a93..e80f3d59c28 100644 --- a/arch/blackfin/configs/BF548-EZKIT_defconfig +++ b/arch/blackfin/configs/BF548-EZKIT_defconfig @@ -1,6 +1,6 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.21.5 +# Linux kernel version: 2.6.22.6 # # CONFIG_MMU is not set # CONFIG_FPU is not set @@ -15,8 +15,9 @@ CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y # CONFIG_GENERIC_TIME is not set -CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_GPIO=y CONFIG_FORCE_MAX_ZONEORDER=14 +CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_IRQCHIP_DEMUX_GPIO=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" @@ -40,7 +41,9 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_TASKSTATS is not set # CONFIG_UTS_NS is not set # CONFIG_AUDIT is not set -# CONFIG_IKCONFIG is not set +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=14 CONFIG_SYSFS_DEPRECATED=y # CONFIG_RELAY is not set CONFIG_BLK_DEV_INITRD=y @@ -51,7 +54,6 @@ CONFIG_EMBEDDED=y CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y -# CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y @@ -59,14 +61,20 @@ CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_VM_EVENT_COUNTERS=y CONFIG_BIG_ORDER_ALLOC_NOFAIL_MAGIC=3 # CONFIG_NP2 is not set CONFIG_SLAB=y -CONFIG_VM_EVENT_COUNTERS=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set CONFIG_RT_MUTEXES=y CONFIG_TINY_SHMEM=y CONFIG_BASE_SMALL=0 -# CONFIG_SLOB is not set # # Loadable module support @@ -165,6 +173,7 @@ CONFIG_IRQ_UART1_TX=10 # # BF548 Specific Configuration # +# CONFIG_DEB_DMA_URGENT is not set # # Interrupt Priority Assignment @@ -242,24 +251,35 @@ CONFIG_IRQ_PINT2=11 CONFIG_IRQ_PINT3=11 # -# Board customizations +# Pin Interrupt to Port Assignment # -# CONFIG_CMDLINE_BOOL is not set # -# Board Setup +# Assignment # -CONFIG_CLKIN_HZ=25000000 -CONFIG_MEM_SIZE=64 -CONFIG_MEM_ADD_WIDTH=10 -CONFIG_BOOT_LOAD=0x1000 +CONFIG_PINTx_REASSIGN=y +CONFIG_PINT0_ASSIGN=0x00000101 +CONFIG_PINT1_ASSIGN=0x01010000 +CONFIG_PINT2_ASSIGN=0x07000101 +CONFIG_PINT3_ASSIGN=0x02020303 # -# Blackfin Kernel Optimizations +# Board customizations # +# CONFIG_CMDLINE_BOOL is not set # -# Timer Tick +# Clock/PLL Setup +# +CONFIG_CLKIN_HZ=25000000 +# CONFIG_BFIN_KERNEL_CLOCK is not set +CONFIG_MAX_VCO_HZ=533000000 +CONFIG_MIN_VCO_HZ=50000000 +CONFIG_MAX_SCLK_HZ=133000000 +CONFIG_MIN_SCLK_HZ=27000000 + +# +# Kernel Timer/Scheduler # # CONFIG_HZ_100 is not set CONFIG_HZ_250=y @@ -267,6 +287,20 @@ CONFIG_HZ_250=y # CONFIG_HZ_1000 is not set CONFIG_HZ=250 +# +# Memory Setup +# +CONFIG_MEM_SIZE=64 +CONFIG_MEM_ADD_WIDTH=10 +CONFIG_BOOT_LOAD=0x1000 +CONFIG_BFIN_SCRATCH_REG_RETN=y +# CONFIG_BFIN_SCRATCH_REG_RETE is not set +# CONFIG_BFIN_SCRATCH_REG_CYCLES is not set + +# +# Blackfin Kernel Optimizations +# + # # Memory Optimizations # @@ -275,12 +309,12 @@ CONFIG_EXCPT_IRQ_SYSC_L1=y CONFIG_DO_IRQ_L1=y CONFIG_CORE_TIMER_IRQ_L1=y CONFIG_IDLE_L1=y -CONFIG_SCHEDULE_L1=y +# CONFIG_SCHEDULE_L1 is not set CONFIG_ARITHMETIC_OPS_L1=y CONFIG_ACCESS_OK_L1=y -CONFIG_MEMSET_L1=y -CONFIG_MEMCPY_L1=y -CONFIG_SYS_BFIN_SPINLOCK_L1=y +# CONFIG_MEMSET_L1 is not set +# CONFIG_MEMCPY_L1 is not set +# CONFIG_SYS_BFIN_SPINLOCK_L1 is not set # CONFIG_IP_CHECKSUM_L1 is not set CONFIG_CACHELINE_ALIGNED_L1=y # CONFIG_SYSCALL_TAB_L1 is not set @@ -314,11 +348,6 @@ CONFIG_BFIN_DCACHE=y CONFIG_BFIN_WT=y CONFIG_L1_MAX_PIECE=16 -# -# Clock Settings -# -# CONFIG_BFIN_KERNEL_CLOCK is not set - # # Asynchonous Memory Configuration # @@ -327,7 +356,6 @@ CONFIG_L1_MAX_PIECE=16 # EBIU_AMBCTL Global Control # CONFIG_C_AMCKEN=y -CONFIG_C_CDPRIO=y # CONFIG_C_AMBEN is not set # CONFIG_C_AMBEN_B0 is not set # CONFIG_C_AMBEN_B0_B1 is not set @@ -338,7 +366,7 @@ CONFIG_C_AMBEN_ALL=y # EBIU_AMBCTL Control # CONFIG_BANK_0=0x7BB0 -CONFIG_BANK_1=0x7BB0 +CONFIG_BANK_1=0x5554 CONFIG_BANK_2=0x7BB0 CONFIG_BANK_3=0x99B3 @@ -346,16 +374,13 @@ CONFIG_BANK_3=0x99B3 # Bus options (PCI, PCMCIA, EISA, MCA, ISA) # # CONFIG_PCI is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set # # PCCARD (PCMCIA/CardBus) support # # CONFIG_PCCARD is not set -# -# PCI Hotplug Support -# - # # Executable file formats # @@ -383,7 +408,6 @@ CONFIG_NET=y # # Networking options # -# CONFIG_NETDEBUG is not set CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -424,20 +448,8 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_NETLABEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set - -# -# DCCP Configuration (EXPERIMENTAL) -# # CONFIG_IP_DCCP is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# # CONFIG_IP_SCTP is not set - -# -# TIPC Configuration (EXPERIMENTAL) -# # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -463,7 +475,16 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_HAMRADIO is not set # CONFIG_IRDA is not set # CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set # # Device Drivers @@ -475,29 +496,23 @@ CONFIG_DEFAULT_TCP_CONG="cubic" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set -# CONFIG_DEBUG_DRIVER is not set -# CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set # # Connector - unified userspace <-> kernelspace linker # # CONFIG_CONNECTOR is not set - -# -# Memory Technology Devices (MTD) -# CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set # CONFIG_MTD_CONCAT is not set CONFIG_MTD_PARTITIONS=y # CONFIG_MTD_REDBOOT_PARTS is not set -# CONFIG_MTD_CMDLINE_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y # # User Modules And Translation Layers # -# CONFIG_MTD_CHAR is not set +CONFIG_MTD_CHAR=y CONFIG_MTD_BLKDEVS=y CONFIG_MTD_BLOCK=y # CONFIG_FTL is not set @@ -509,8 +524,10 @@ CONFIG_MTD_BLOCK=y # # RAM/ROM/Flash chip drivers # -# CONFIG_MTD_CFI is not set +CONFIG_MTD_CFI=y # CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set CONFIG_MTD_MAP_BANK_WIDTH_1=y CONFIG_MTD_MAP_BANK_WIDTH_2=y CONFIG_MTD_MAP_BANK_WIDTH_4=y @@ -521,22 +538,32 @@ CONFIG_MTD_CFI_I1=y CONFIG_MTD_CFI_I2=y # CONFIG_MTD_CFI_I4 is not set # CONFIG_MTD_CFI_I8 is not set +CONFIG_MTD_CFI_INTELEXT=y +# CONFIG_MTD_CFI_AMDSTD is not set +# CONFIG_MTD_CFI_STAA is not set +# CONFIG_MTD_MW320D is not set +CONFIG_MTD_CFI_UTIL=y CONFIG_MTD_RAM=y # CONFIG_MTD_ROM is not set # CONFIG_MTD_ABSENT is not set -# CONFIG_MTD_OBSOLETE_CHIPS is not set # # Mapping drivers for chip access # CONFIG_MTD_COMPLEX_MAPPINGS=y +CONFIG_MTD_PHYSMAP=y +CONFIG_MTD_PHYSMAP_START=0x20000000 +CONFIG_MTD_PHYSMAP_LEN=0x400000 +CONFIG_MTD_PHYSMAP_BANKWIDTH=2 # CONFIG_MTD_BF5xx is not set -CONFIG_MTD_UCLINUX=y +# CONFIG_MTD_UCLINUX is not set # CONFIG_MTD_PLATRAM is not set # # Self-contained MTD device drivers # +# CONFIG_MTD_DATAFLASH is not set +# CONFIG_MTD_M25P80 is not set # CONFIG_MTD_SLRAM is not set # CONFIG_MTD_PHRAM is not set # CONFIG_MTD_MTDRAM is not set @@ -548,16 +575,23 @@ CONFIG_MTD_UCLINUX=y # CONFIG_MTD_DOC2000 is not set # CONFIG_MTD_DOC2001 is not set # CONFIG_MTD_DOC2001PLUS is not set +CONFIG_MTD_NAND=y +# CONFIG_MTD_NAND_VERIFY_WRITE is not set +# CONFIG_MTD_NAND_ECC_SMC is not set +# CONFIG_MTD_NAND_MUSEUM_IDS is not set +# CONFIG_MTD_NAND_BFIN is not set +CONFIG_MTD_NAND_IDS=y +CONFIG_MTD_NAND_BF5XX=y +CONFIG_MTD_NAND_BF5XX_HWECC=y +# CONFIG_MTD_NAND_DISKONCHIP is not set +# CONFIG_MTD_NAND_NANDSIM is not set +# CONFIG_MTD_NAND_PLATFORM is not set +# CONFIG_MTD_ONENAND is not set # -# NAND Flash Device Drivers -# -# CONFIG_MTD_NAND is not set - -# -# OneNAND Flash Device Drivers +# UBI - Unsorted block images # -# CONFIG_MTD_ONENAND is not set +# CONFIG_MTD_UBI is not set # # Parallel port support @@ -585,41 +619,61 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 # # Misc devices # - -# -# ATA/ATAPI/MFM/RLL support -# # CONFIG_IDE is not set # # SCSI device support # # CONFIG_RAID_ATTRS is not set -# CONFIG_SCSI is not set +CONFIG_SCSI=y +# CONFIG_SCSI_TGT is not set # CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y # -# Serial ATA (prod) and Parallel ATA (experimental) drivers +# SCSI support type (disk, tape, CD-ROM) # -# CONFIG_ATA is not set +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +CONFIG_BLK_DEV_SR=y +# CONFIG_BLK_DEV_SR_VENDOR is not set +# CONFIG_CHR_DEV_SG is not set +# CONFIG_CHR_DEV_SCH is not set # -# Multi-device support (RAID and LVM) +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs # -# CONFIG_MD is not set +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m # -# Fusion MPT device support +# SCSI Transports # -# CONFIG_FUSION is not set +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set # -# IEEE 1394 (FireWire) support +# SCSI low-level drivers # +# CONFIG_ISCSI_TCP is not set +# CONFIG_SCSI_DEBUG is not set +CONFIG_ATA=y +# CONFIG_ATA_NONSTANDARD is not set +# CONFIG_PATA_PLATFORM is not set +CONFIG_PATA_BF54X=y +CONFIG_PATA_BF54X_DMA=y # -# I2O device support +# Multi-device support (RAID and LVM) # +# CONFIG_MD is not set # # Network device support @@ -629,10 +683,6 @@ CONFIG_NETDEVICES=y # CONFIG_BONDING is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set - -# -# PHY device support -# # CONFIG_PHYLIB is not set # @@ -641,28 +691,16 @@ CONFIG_NETDEVICES=y CONFIG_NET_ETHERNET=y CONFIG_MII=y # CONFIG_SMC91X is not set -# CONFIG_SMSC911X is not set - -# -# Ethernet (1000 Mbit) -# - -# -# Ethernet (10000 Mbit) -# +CONFIG_SMSC911X=y +# CONFIG_DM9000 is not set +CONFIG_NETDEV_1000=y +CONFIG_NETDEV_10000=y # -# Token Ring devices -# - -# -# Wireless LAN (non-hamradio) -# -# CONFIG_NET_RADIO is not set - -# -# Wan interfaces +# Wireless LAN # +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set # CONFIG_WAN is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set @@ -686,6 +724,7 @@ CONFIG_MII=y # CONFIG_INPUT=y # CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set # # Userland interfaces @@ -702,10 +741,17 @@ CONFIG_INPUT=y # CONFIG_INPUT_KEYBOARD is not set # CONFIG_INPUT_MOUSE is not set # CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set # CONFIG_INPUT_TOUCHSCREEN is not set CONFIG_INPUT_MISC=y +# CONFIG_INPUT_ATI_REMOTE is not set +# CONFIG_INPUT_ATI_REMOTE2 is not set +# CONFIG_INPUT_KEYSPAN_REMOTE is not set +# CONFIG_INPUT_POWERMATE is not set +# CONFIG_INPUT_YEALINK is not set # CONFIG_INPUT_UINPUT is not set # CONFIG_BF53X_PFBUTTONS is not set +# CONFIG_TWI_KEYPAD is not set # # Hardware I/O ports @@ -718,12 +764,15 @@ CONFIG_INPUT_MISC=y # # CONFIG_AD9960 is not set # CONFIG_SPI_ADC_BF533 is not set -# CONFIG_BF5xx_PFLAGS is not set +# CONFIG_BFIN_PFLAGS is not set # CONFIG_BF5xx_PPIFCD is not set # CONFIG_BF5xx_TIMERS is not set # CONFIG_BF5xx_PPI is not set # CONFIG_BFIN_SPORT is not set # CONFIG_BFIN_TIMER_LATENCY is not set +# CONFIG_TWI_LCD is not set +# CONFIG_AD5304 is not set +# CONFIG_BF5xx_TEA5764 is not set # CONFIG_BF5xx_FBDMA is not set # CONFIG_VT is not set # CONFIG_SERIAL_NONSTANDARD is not set @@ -760,14 +809,9 @@ CONFIG_UNIX98_PTYS=y # IPMI # # CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# # CONFIG_WATCHDOG is not set CONFIG_HW_RANDOM=y # CONFIG_GEN_RTC is not set -# CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_RAW_DRIVER is not set @@ -775,32 +819,114 @@ CONFIG_HW_RANDOM=y # TPM devices # # CONFIG_TCG_TPM is not set +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_CHARDEV=y + +# +# I2C Algorithms +# +# CONFIG_I2C_ALGOBIT is not set +# CONFIG_I2C_ALGOPCF is not set +# CONFIG_I2C_ALGOPCA is not set # -# I2C support +# I2C Hardware Bus support # -# CONFIG_I2C is not set +# CONFIG_I2C_BLACKFIN_GPIO is not set +CONFIG_I2C_BLACKFIN_TWI=y +CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=50 +# CONFIG_I2C_GPIO is not set +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_SIMTEC is not set +# CONFIG_I2C_STUB is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_SENSORS_DS1337 is not set +# CONFIG_SENSORS_DS1374 is not set +# CONFIG_SENSORS_AD5252 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCF8575 is not set +# CONFIG_SENSORS_PCA9543 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set # # SPI support # -# CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set +CONFIG_SPI=y +CONFIG_SPI_MASTER=y # -# Dallas's 1-wire bus +# SPI Master Controller Drivers # -# CONFIG_W1 is not set +CONFIG_SPI_BFIN=y +# CONFIG_SPI_BITBANG is not set + +# +# SPI Protocol Masters +# +# CONFIG_SPI_AT25 is not set +# CONFIG_SPI_SPIDEV is not set # -# Hardware Monitoring support +# Dallas's 1-wire bus # +# CONFIG_W1 is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set # CONFIG_SENSORS_ABITUGURU is not set +# CONFIG_SENSORS_AD7418 is not set +# CONFIG_SENSORS_ADM1021 is not set +# CONFIG_SENSORS_ADM1025 is not set +# CONFIG_SENSORS_ADM1026 is not set +# CONFIG_SENSORS_ADM1029 is not set +# CONFIG_SENSORS_ADM1031 is not set +# CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ASB100 is not set +# CONFIG_SENSORS_ATXP1 is not set +# CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_FSCHER is not set +# CONFIG_SENSORS_FSCPOS is not set +# CONFIG_SENSORS_GL518SM is not set +# CONFIG_SENSORS_GL520SM is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_LM63 is not set +# CONFIG_SENSORS_LM70 is not set +# CONFIG_SENSORS_LM75 is not set +# CONFIG_SENSORS_LM77 is not set +# CONFIG_SENSORS_LM78 is not set +# CONFIG_SENSORS_LM80 is not set +# CONFIG_SENSORS_LM83 is not set +# CONFIG_SENSORS_LM85 is not set +# CONFIG_SENSORS_LM87 is not set +# CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set +# CONFIG_SENSORS_MAX1619 is not set +# CONFIG_SENSORS_MAX6650 is not set +# CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47M192 is not set +# CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_VT1211 is not set +# CONFIG_SENSORS_W83781D is not set +# CONFIG_SENSORS_W83791D is not set +# CONFIG_SENSORS_W83792D is not set +# CONFIG_SENSORS_W83793 is not set +# CONFIG_SENSORS_W83L785TS is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set # CONFIG_HWMON_DEBUG_CHIP is not set # @@ -812,16 +938,19 @@ CONFIG_HWMON=y # Multimedia devices # # CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +CONFIG_DAB=y # -# Digital Video Broadcasting Devices +# Graphics support # -# CONFIG_DVB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # -# Graphics support +# Display device support # -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set +# CONFIG_DISPLAY_SUPPORT is not set +# CONFIG_VGASTATE is not set # CONFIG_FB is not set # @@ -843,6 +972,10 @@ CONFIG_USB_ARCH_HAS_HCD=y # CONFIG_USB_ARCH_HAS_EHCI is not set # CONFIG_USB is not set +# +# Enable Host or Gadget support to see Inventra options +# + # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # @@ -851,11 +984,20 @@ CONFIG_USB_ARCH_HAS_HCD=y # USB Gadget Support # # CONFIG_USB_GADGET is not set +CONFIG_MMC=m +# CONFIG_MMC_DEBUG is not set +# CONFIG_MMC_UNSAFE_RESUME is not set + +# +# MMC/SD Card Drivers +# +CONFIG_MMC_BLOCK=m # -# MMC/SD Card support +# MMC/SD Host Controller Drivers # -# CONFIG_MMC is not set +CONFIG_SDH_BFIN=m +# CONFIG_SPI_MMC is not set # # LED devices @@ -894,15 +1036,37 @@ CONFIG_RTC_INTF_SYSFS=y CONFIG_RTC_INTF_PROC=y CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set # -# RTC drivers +# I2C RTC drivers +# +# CONFIG_RTC_DRV_DS1307 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_MAX6900 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_X1205 is not set +# CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_PCF8583 is not set + +# +# SPI RTC drivers +# +# CONFIG_RTC_DRV_RS5C348 is not set +# CONFIG_RTC_DRV_MAX6902 is not set + +# +# Platform RTC drivers # # CONFIG_RTC_DRV_DS1553 is not set # CONFIG_RTC_DRV_DS1742 is not set # CONFIG_RTC_DRV_M48T86 is not set -# CONFIG_RTC_DRV_TEST is not set # CONFIG_RTC_DRV_V3020 is not set + +# +# on-CPU RTC drivers +# CONFIG_RTC_DRV_BFIN=y # @@ -918,14 +1082,6 @@ CONFIG_RTC_DRV_BFIN=y # DMA Devices # -# -# Auxiliary Display support -# - -# -# Virtualization -# - # # PBX support # @@ -991,8 +1147,25 @@ CONFIG_RAMFS=y # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set -# CONFIG_YAFFS_FS is not set -# CONFIG_JFFS2_FS is not set +CONFIG_YAFFS_FS=m +CONFIG_YAFFS_YAFFS1=y +# CONFIG_YAFFS_DOES_ECC is not set +CONFIG_YAFFS_YAFFS2=y +CONFIG_YAFFS_AUTO_YAFFS2=y +# CONFIG_YAFFS_DISABLE_LAZY_LOAD is not set +CONFIG_YAFFS_CHECKPOINT_RESERVED_BLOCKS=10 +# CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set +# CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED is not set +CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y +CONFIG_JFFS2_FS=m +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_SUMMARY is not set +# CONFIG_JFFS2_FS_XATTR is not set +# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set +CONFIG_JFFS2_ZLIB=y +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set # CONFIG_HPFS_FS is not set @@ -1040,36 +1213,20 @@ CONFIG_MSDOS_PARTITION=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_MAGIC_SYSRQ=y # CONFIG_UNUSED_SYMBOLS is not set -# CONFIG_DEBUG_FS is not set +CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set -CONFIG_DEBUG_KERNEL=y -# CONFIG_DEBUG_SHIRQ is not set -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_DETECT_SOFTLOCKUP=y -# CONFIG_SCHEDSTATS is not set -# CONFIG_TIMER_STATS is not set -# CONFIG_DEBUG_SLAB is not set -# CONFIG_DEBUG_RT_MUTEXES is not set -# CONFIG_RT_MUTEX_TESTER is not set -# CONFIG_DEBUG_SPINLOCK is not set -# CONFIG_DEBUG_MUTEXES is not set -# CONFIG_DEBUG_SPINLOCK_SLEEP is not set -# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set -# CONFIG_DEBUG_KOBJECT is not set +# CONFIG_DEBUG_KERNEL is not set # CONFIG_DEBUG_BUGVERBOSE is not set -CONFIG_DEBUG_INFO=y -# CONFIG_DEBUG_VM is not set -# CONFIG_DEBUG_LIST is not set -CONFIG_FRAME_POINTER=y -CONFIG_FORCED_INLINING=y -# CONFIG_RCU_TORTURE_TEST is not set -# CONFIG_FAULT_INJECTION is not set -CONFIG_DEBUG_HWERR=y -# CONFIG_DEBUG_ICACHE_CHECK is not set -# CONFIG_DEBUG_KERNEL_START is not set -# CONFIG_DEBUG_SERIAL_EARLY_INIT is not set +CONFIG_DEBUG_MMRS=y CONFIG_DEBUG_HUNT_FOR_ZERO=y +CONFIG_DEBUG_BFIN_HWTRACE_ON=y +CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF=y +# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE is not set +# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_TWO is not set +CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=0 +# CONFIG_DEBUG_BFIN_HWTRACE_EXPAND is not set # CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE is not set +CONFIG_EARLY_PRINTK=y CONFIG_CPLB_INFO=y CONFIG_ACCESS_CHECK=y @@ -1092,9 +1249,12 @@ CONFIG_SECURITY_CAPABILITIES=y CONFIG_BITREVERSE=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=m CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/blackfin/configs/BF561-EZKIT_defconfig b/arch/blackfin/configs/BF561-EZKIT_defconfig index 698a2492424..85e647f8775 100644 --- a/arch/blackfin/configs/BF561-EZKIT_defconfig +++ b/arch/blackfin/configs/BF561-EZKIT_defconfig @@ -1,6 +1,6 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.21.5 +# Linux kernel version: 2.6.22.6 # # CONFIG_MMU is not set # CONFIG_FPU is not set @@ -15,8 +15,9 @@ CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y # CONFIG_GENERIC_TIME is not set -CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_GPIO=y CONFIG_FORCE_MAX_ZONEORDER=14 +CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_IRQCHIP_DEMUX_GPIO=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" @@ -40,7 +41,9 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_TASKSTATS is not set # CONFIG_UTS_NS is not set # CONFIG_AUDIT is not set -# CONFIG_IKCONFIG is not set +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=14 CONFIG_SYSFS_DEPRECATED=y # CONFIG_RELAY is not set CONFIG_BLK_DEV_INITRD=y @@ -58,15 +61,20 @@ CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_VM_EVENT_COUNTERS=y CONFIG_BIG_ORDER_ALLOC_NOFAIL_MAGIC=3 -CONFIG_BUDDY=y # CONFIG_NP2 is not set CONFIG_SLAB=y -CONFIG_VM_EVENT_COUNTERS=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set CONFIG_RT_MUTEXES=y CONFIG_TINY_SHMEM=y CONFIG_BASE_SMALL=0 -# CONFIG_SLOB is not set # # Loadable module support @@ -229,19 +237,17 @@ CONFIG_IRQ_WDTIMER=13 # CONFIG_CMDLINE_BOOL is not set # -# Board Setup +# Clock/PLL Setup # CONFIG_CLKIN_HZ=30000000 -CONFIG_MEM_SIZE=64 -CONFIG_MEM_ADD_WIDTH=9 -CONFIG_BOOT_LOAD=0x1000 - -# -# Blackfin Kernel Optimizations -# +# CONFIG_BFIN_KERNEL_CLOCK is not set +CONFIG_MAX_VCO_HZ=600000000 +CONFIG_MIN_VCO_HZ=50000000 +CONFIG_MAX_SCLK_HZ=133000000 +CONFIG_MIN_SCLK_HZ=27000000 # -# Timer Tick +# Kernel Timer/Scheduler # # CONFIG_HZ_100 is not set CONFIG_HZ_250=y @@ -249,6 +255,20 @@ CONFIG_HZ_250=y # CONFIG_HZ_1000 is not set CONFIG_HZ=250 +# +# Memory Setup +# +CONFIG_MEM_SIZE=64 +CONFIG_MEM_ADD_WIDTH=9 +CONFIG_BOOT_LOAD=0x1000 +CONFIG_BFIN_SCRATCH_REG_RETN=y +# CONFIG_BFIN_SCRATCH_REG_RETE is not set +# CONFIG_BFIN_SCRATCH_REG_CYCLES is not set + +# +# Blackfin Kernel Optimizations +# + # # Memory Optimizations # @@ -296,11 +316,6 @@ CONFIG_BFIN_DCACHE=y CONFIG_BFIN_WT=y CONFIG_L1_MAX_PIECE=16 -# -# Clock Settings -# -# CONFIG_BFIN_KERNEL_CLOCK is not set - # # Asynchonous Memory Configuration # @@ -326,22 +341,19 @@ CONFIG_C_AMBEN_ALL=y CONFIG_BANK_0=0x7BB0 CONFIG_BANK_1=0x7BB0 CONFIG_BANK_2=0x7BB0 -CONFIG_BANK_3=0x99B3 +CONFIG_BANK_3=0xAAC3 # # Bus options (PCI, PCMCIA, EISA, MCA, ISA) # # CONFIG_PCI is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set # # PCCARD (PCMCIA/CardBus) support # # CONFIG_PCCARD is not set -# -# PCI Hotplug Support -# - # # Executable file formats # @@ -364,7 +376,6 @@ CONFIG_NET=y # # Networking options # -# CONFIG_NETDEBUG is not set CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -405,20 +416,8 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_NETLABEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set - -# -# DCCP Configuration (EXPERIMENTAL) -# # CONFIG_IP_DCCP is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# # CONFIG_IP_SCTP is not set - -# -# TIPC Configuration (EXPERIMENTAL) -# # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -485,7 +484,16 @@ CONFIG_IRTTY_SIR=m # FIR device drivers # # CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set # # Device Drivers @@ -503,10 +511,6 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # Connector - unified userspace <-> kernelspace linker # # CONFIG_CONNECTOR is not set - -# -# Memory Technology Devices (MTD) -# CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set # CONFIG_MTD_CONCAT is not set @@ -550,7 +554,6 @@ CONFIG_MTD_MW320D=m CONFIG_MTD_RAM=y CONFIG_MTD_ROM=m # CONFIG_MTD_ABSENT is not set -# CONFIG_MTD_OBSOLETE_CHIPS is not set # # Mapping drivers for chip access @@ -588,16 +591,13 @@ CONFIG_BFIN_FLASH_BANK_3=0x7BB0 # CONFIG_MTD_DOC2000 is not set # CONFIG_MTD_DOC2001 is not set # CONFIG_MTD_DOC2001PLUS is not set - -# -# NAND Flash Device Drivers -# # CONFIG_MTD_NAND is not set +# CONFIG_MTD_ONENAND is not set # -# OneNAND Flash Device Drivers +# UBI - Unsorted block images # -# CONFIG_MTD_ONENAND is not set +# CONFIG_MTD_UBI is not set # # Parallel port support @@ -625,10 +625,6 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 # # Misc devices # - -# -# ATA/ATAPI/MFM/RLL support -# # CONFIG_IDE is not set # @@ -637,10 +633,6 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 # CONFIG_RAID_ATTRS is not set # CONFIG_SCSI is not set # CONFIG_SCSI_NETLINK is not set - -# -# Serial ATA (prod) and Parallel ATA (experimental) drivers -# # CONFIG_ATA is not set # @@ -648,19 +640,6 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 # # CONFIG_MD is not set -# -# Fusion MPT device support -# -# CONFIG_FUSION is not set - -# -# IEEE 1394 (FireWire) support -# - -# -# I2O device support -# - # # Network device support # @@ -669,10 +648,6 @@ CONFIG_NETDEVICES=y # CONFIG_BONDING is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set - -# -# PHY device support -# # CONFIG_PHYLIB is not set # @@ -682,27 +657,15 @@ CONFIG_NET_ETHERNET=y CONFIG_MII=y CONFIG_SMC91X=y # CONFIG_SMSC911X is not set +# CONFIG_DM9000 is not set +CONFIG_NETDEV_1000=y +CONFIG_NETDEV_10000=y # -# Ethernet (1000 Mbit) -# - -# -# Ethernet (10000 Mbit) -# - -# -# Token Ring devices -# - -# -# Wireless LAN (non-hamradio) -# -# CONFIG_NET_RADIO is not set - -# -# Wan interfaces +# Wireless LAN # +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set # CONFIG_WAN is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set @@ -726,6 +689,7 @@ CONFIG_SMC91X=y # CONFIG_INPUT=m # CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set # # Userland interfaces @@ -742,6 +706,7 @@ CONFIG_INPUT_EVDEV=m # CONFIG_INPUT_KEYBOARD is not set # CONFIG_INPUT_MOUSE is not set # CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set # CONFIG_INPUT_TOUCHSCREEN is not set # CONFIG_INPUT_MISC is not set @@ -756,7 +721,7 @@ CONFIG_INPUT_EVDEV=m # # CONFIG_AD9960 is not set # CONFIG_SPI_ADC_BF533 is not set -# CONFIG_BF5xx_PFLAGS is not set +# CONFIG_BFIN_PFLAGS is not set # CONFIG_BF5xx_PPIFCD is not set # CONFIG_BF5xx_TIMERS is not set # CONFIG_BF5xx_PPI is not set @@ -796,10 +761,6 @@ CONFIG_UNIX98_PTYS=y # IPMI # # CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set @@ -810,7 +771,6 @@ CONFIG_WATCHDOG=y CONFIG_BFIN_WDT=y CONFIG_HW_RANDOM=y # CONFIG_GEN_RTC is not set -# CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_RAW_DRIVER is not set @@ -818,10 +778,6 @@ CONFIG_HW_RANDOM=y # TPM devices # # CONFIG_TCG_TPM is not set - -# -# I2C support -# # CONFIG_I2C is not set # @@ -840,22 +796,22 @@ CONFIG_SPI_BFIN=y # SPI Protocol Masters # # CONFIG_SPI_AT25 is not set +# CONFIG_SPI_SPIDEV is not set # # Dallas's 1-wire bus # # CONFIG_W1 is not set - -# -# Hardware Monitoring support -# CONFIG_HWMON=y # CONFIG_HWMON_VID is not set # CONFIG_SENSORS_ABITUGURU is not set # CONFIG_SENSORS_F71805F is not set # CONFIG_SENSORS_LM70 is not set # CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_VT1211 is not set +# CONFIG_SENSORS_W83627HF is not set # CONFIG_HWMON_DEBUG_CHIP is not set # @@ -867,16 +823,19 @@ CONFIG_HWMON=y # Multimedia devices # # CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +CONFIG_DAB=y # -# Digital Video Broadcasting Devices +# Graphics support # -# CONFIG_DVB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # -# Graphics support +# Display device support # -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set +# CONFIG_DISPLAY_SUPPORT is not set +# CONFIG_VGASTATE is not set # CONFIG_FB is not set # @@ -899,18 +858,17 @@ CONFIG_USB_ARCH_HAS_HCD=y # CONFIG_USB is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# Enable Host or Gadget support to see Inventra options # # -# USB Gadget Support +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # -# CONFIG_USB_GADGET is not set # -# MMC/SD Card support +# USB Gadget Support # -# CONFIG_SPI_MMC is not set +# CONFIG_USB_GADGET is not set # CONFIG_MMC is not set # @@ -952,14 +910,6 @@ CONFIG_USB_ARCH_HAS_HCD=y # DMA Devices # -# -# Auxiliary Display support -# - -# -# Virtualization -# - # # PBX support # @@ -1060,6 +1010,7 @@ CONFIG_LOCKD=m CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=m +# CONFIG_SUNRPC_BIND34 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set CONFIG_SMB_FS=m @@ -1137,14 +1088,20 @@ CONFIG_NLS_DEFAULT="iso8859-1" CONFIG_ENABLE_MUST_CHECK=y # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set -# CONFIG_DEBUG_FS is not set +CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set -CONFIG_LOG_BUF_SHIFT=14 # CONFIG_DEBUG_BUGVERBOSE is not set -# CONFIG_DEBUG_SERIAL_EARLY_INIT is not set +CONFIG_DEBUG_MMRS=y CONFIG_DEBUG_HUNT_FOR_ZERO=y +CONFIG_DEBUG_BFIN_HWTRACE_ON=y +CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF=y +# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE is not set +# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_TWO is not set +CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=0 +# CONFIG_DEBUG_BFIN_HWTRACE_EXPAND is not set # CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE is not set +CONFIG_EARLY_PRINTK=y # CONFIG_DUAL_CORE_TEST_MODULE is not set CONFIG_CPLB_INFO=y CONFIG_ACCESS_CHECK=y @@ -1168,6 +1125,7 @@ CONFIG_SECURITY_CAPABILITIES=m CONFIG_BITREVERSE=y CONFIG_CRC_CCITT=m # CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y @@ -1175,3 +1133,4 @@ CONFIG_ZLIB_DEFLATE=m CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/blackfin/configs/PNAV-10_defconfig b/arch/blackfin/configs/PNAV-10_defconfig index dbb0c4f399f..15e36aaf218 100644 --- a/arch/blackfin/configs/PNAV-10_defconfig +++ b/arch/blackfin/configs/PNAV-10_defconfig @@ -1,6 +1,6 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.21.5 +# Linux kernel version: 2.6.22.6 # # CONFIG_MMU is not set # CONFIG_FPU is not set @@ -15,8 +15,9 @@ CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y # CONFIG_GENERIC_TIME is not set -CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_GPIO=y CONFIG_FORCE_MAX_ZONEORDER=14 +CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_IRQCHIP_DEMUX_GPIO=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" @@ -41,6 +42,7 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_UTS_NS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 CONFIG_SYSFS_DEPRECATED=y # CONFIG_RELAY is not set # CONFIG_BLK_DEV_INITRD is not set @@ -57,15 +59,20 @@ CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_VM_EVENT_COUNTERS=y CONFIG_BIG_ORDER_ALLOC_NOFAIL_MAGIC=9 -CONFIG_BUDDY=y # CONFIG_NP2 is not set CONFIG_SLAB=y -CONFIG_VM_EVENT_COUNTERS=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set CONFIG_RT_MUTEXES=y CONFIG_TINY_SHMEM=y CONFIG_BASE_SMALL=0 -# CONFIG_SLOB is not set # # Loadable module support @@ -146,13 +153,6 @@ CONFIG_IRQ_PLL_WAKEUP=7 # BF537 Specific Configuration # -# -# PORT F/G Selection -# -CONFIG_BF537_PORT_F=y -# CONFIG_BF537_PORT_G is not set -# CONFIG_BF537_PORT_H is not set - # # Interrupt Priority Assignment # @@ -198,19 +198,17 @@ CONFIG_IRQ_WATCH=13 # CONFIG_CMDLINE_BOOL is not set # -# Board Setup +# Clock/PLL Setup # CONFIG_CLKIN_HZ=24576000 -CONFIG_MEM_SIZE=64 -CONFIG_MEM_ADD_WIDTH=10 -CONFIG_BOOT_LOAD=0x1000 - -# -# Blackfin Kernel Optimizations -# +# CONFIG_BFIN_KERNEL_CLOCK is not set +CONFIG_MAX_VCO_HZ=600000000 +CONFIG_MIN_VCO_HZ=50000000 +CONFIG_MAX_SCLK_HZ=133000000 +CONFIG_MIN_SCLK_HZ=27000000 # -# Timer Tick +# Kernel Timer/Scheduler # # CONFIG_HZ_100 is not set CONFIG_HZ_250=y @@ -218,6 +216,20 @@ CONFIG_HZ_250=y # CONFIG_HZ_1000 is not set CONFIG_HZ=250 +# +# Memory Setup +# +CONFIG_MEM_SIZE=64 +CONFIG_MEM_ADD_WIDTH=10 +CONFIG_BOOT_LOAD=0x1000 +CONFIG_BFIN_SCRATCH_REG_RETN=y +# CONFIG_BFIN_SCRATCH_REG_RETE is not set +# CONFIG_BFIN_SCRATCH_REG_CYCLES is not set + +# +# Blackfin Kernel Optimizations +# + # # Memory Optimizations # @@ -265,11 +277,6 @@ CONFIG_BFIN_WB=y # CONFIG_BFIN_WT is not set CONFIG_L1_MAX_PIECE=16 -# -# Clock Settings -# -# CONFIG_BFIN_KERNEL_CLOCK is not set - # # Asynchonous Memory Configuration # @@ -297,16 +304,13 @@ CONFIG_BANK_3=0x99B3 # Bus options (PCI, PCMCIA, EISA, MCA, ISA) # # CONFIG_PCI is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set # # PCCARD (PCMCIA/CardBus) support # # CONFIG_PCCARD is not set -# -# PCI Hotplug Support -# - # # Executable file formats # @@ -334,7 +338,6 @@ CONFIG_NET=y # # Networking options # -# CONFIG_NETDEBUG is not set CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -375,20 +378,8 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_NETLABEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set - -# -# DCCP Configuration (EXPERIMENTAL) -# # CONFIG_IP_DCCP is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# # CONFIG_IP_SCTP is not set - -# -# TIPC Configuration (EXPERIMENTAL) -# # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -414,7 +405,16 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_HAMRADIO is not set # CONFIG_IRDA is not set # CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set # # Device Drivers @@ -432,10 +432,6 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # Connector - unified userspace <-> kernelspace linker # # CONFIG_CONNECTOR is not set - -# -# Memory Technology Devices (MTD) -# CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set # CONFIG_MTD_CONCAT is not set @@ -473,7 +469,6 @@ CONFIG_MTD_CFI_I2=y CONFIG_MTD_RAM=y # CONFIG_MTD_ROM is not set # CONFIG_MTD_ABSENT is not set -# CONFIG_MTD_OBSOLETE_CHIPS is not set # # Mapping drivers for chip access @@ -499,13 +494,10 @@ CONFIG_MTD_UCLINUX=y # CONFIG_MTD_DOC2000 is not set # CONFIG_MTD_DOC2001 is not set # CONFIG_MTD_DOC2001PLUS is not set - -# -# NAND Flash Device Drivers -# CONFIG_MTD_NAND=y # CONFIG_MTD_NAND_VERIFY_WRITE is not set # CONFIG_MTD_NAND_ECC_SMC is not set +# CONFIG_MTD_NAND_MUSEUM_IDS is not set CONFIG_MTD_NAND_BFIN=y CONFIG_BFIN_NAND_BASE=0x20100000 CONFIG_BFIN_NAND_CLE=2 @@ -514,11 +506,13 @@ CONFIG_BFIN_NAND_READY=44 CONFIG_MTD_NAND_IDS=y # CONFIG_MTD_NAND_DISKONCHIP is not set # CONFIG_MTD_NAND_NANDSIM is not set +# CONFIG_MTD_NAND_PLATFORM is not set +# CONFIG_MTD_ONENAND is not set # -# OneNAND Flash Device Drivers +# UBI - Unsorted block images # -# CONFIG_MTD_ONENAND is not set +# CONFIG_MTD_UBI is not set # # Parallel port support @@ -546,10 +540,6 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 # # Misc devices # - -# -# ATA/ATAPI/MFM/RLL support -# # CONFIG_IDE is not set # @@ -558,10 +548,6 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 # CONFIG_RAID_ATTRS is not set # CONFIG_SCSI is not set # CONFIG_SCSI_NETLINK is not set - -# -# Serial ATA (prod) and Parallel ATA (experimental) drivers -# # CONFIG_ATA is not set # @@ -569,19 +555,6 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 # # CONFIG_MD is not set -# -# Fusion MPT device support -# -# CONFIG_FUSION is not set - -# -# IEEE 1394 (FireWire) support -# - -# -# I2O device support -# - # # Network device support # @@ -590,11 +563,20 @@ CONFIG_NETDEVICES=y # CONFIG_BONDING is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set +CONFIG_PHYLIB=y # -# PHY device support +# MII PHY device drivers # -# CONFIG_PHYLIB is not set +# CONFIG_MARVELL_PHY is not set +# CONFIG_DAVICOM_PHY is not set +# CONFIG_QSEMI_PHY is not set +# CONFIG_LXT_PHY is not set +# CONFIG_CICADA_PHY is not set +# CONFIG_VITESSE_PHY is not set +# CONFIG_SMSC_PHY is not set +# CONFIG_BROADCOM_PHY is not set +# CONFIG_FIXED_PHY is not set # # Ethernet (10 or 100Mbit) @@ -608,27 +590,15 @@ CONFIG_BFIN_TX_DESC_NUM=100 CONFIG_BFIN_RX_DESC_NUM=100 CONFIG_BFIN_MAC_RMII=y # CONFIG_SMSC911X is not set +# CONFIG_DM9000 is not set +CONFIG_NETDEV_1000=y +CONFIG_NETDEV_10000=y # -# Ethernet (1000 Mbit) -# - -# -# Ethernet (10000 Mbit) -# - -# -# Token Ring devices -# - -# -# Wireless LAN (non-hamradio) -# -# CONFIG_NET_RADIO is not set - -# -# Wan interfaces +# Wireless LAN # +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set # CONFIG_WAN is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set @@ -652,6 +622,7 @@ CONFIG_BFIN_MAC_RMII=y # CONFIG_INPUT=y # CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set # # Userland interfaces @@ -670,6 +641,7 @@ CONFIG_INPUT_EVDEV=y # CONFIG_INPUT_KEYBOARD is not set # CONFIG_INPUT_MOUSE is not set # CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set CONFIG_INPUT_TOUCHSCREEN=y # CONFIG_TOUCHSCREEN_ADS7846 is not set CONFIG_TOUCHSCREEN_AD7877=y @@ -681,7 +653,13 @@ CONFIG_TOUCHSCREEN_AD7877=y # CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set # CONFIG_TOUCHSCREEN_TOUCHWIN is not set # CONFIG_TOUCHSCREEN_UCB1400 is not set +# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set CONFIG_INPUT_MISC=y +# CONFIG_INPUT_ATI_REMOTE is not set +# CONFIG_INPUT_ATI_REMOTE2 is not set +# CONFIG_INPUT_KEYSPAN_REMOTE is not set +# CONFIG_INPUT_POWERMATE is not set +# CONFIG_INPUT_YEALINK is not set CONFIG_INPUT_UINPUT=y # CONFIG_BF53X_PFBUTTONS is not set # CONFIG_TWI_KEYPAD is not set @@ -697,7 +675,7 @@ CONFIG_INPUT_UINPUT=y # # CONFIG_AD9960 is not set # CONFIG_SPI_ADC_BF533 is not set -# CONFIG_BF5xx_PFLAGS is not set +# CONFIG_BFIN_PFLAGS is not set # CONFIG_BF5xx_PPIFCD is not set # CONFIG_BF5xx_TIMERS is not set # CONFIG_BF5xx_PPI is not set @@ -749,14 +727,9 @@ CONFIG_CAN_BLACKFIN=m # IPMI # # CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# # CONFIG_WATCHDOG is not set CONFIG_HW_RANDOM=y # CONFIG_GEN_RTC is not set -# CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_RAW_DRIVER is not set @@ -764,11 +737,8 @@ CONFIG_HW_RANDOM=y # TPM devices # # CONFIG_TCG_TPM is not set - -# -# I2C support -# CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y CONFIG_I2C_CHARDEV=y # @@ -784,10 +754,11 @@ CONFIG_I2C_CHARDEV=y # CONFIG_I2C_BLACKFIN_GPIO is not set CONFIG_I2C_BLACKFIN_TWI=y CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=50 +# CONFIG_I2C_GPIO is not set # CONFIG_I2C_OCORES is not set # CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_SIMTEC is not set # CONFIG_I2C_STUB is not set -# CONFIG_I2C_PCA_ISA is not set # # Miscellaneous I2C Chip support @@ -823,18 +794,16 @@ CONFIG_SPI_BFIN=y # SPI Protocol Masters # # CONFIG_SPI_AT25 is not set +# CONFIG_SPI_SPIDEV is not set # # Dallas's 1-wire bus # # CONFIG_W1 is not set - -# -# Hardware Monitoring support -# CONFIG_HWMON=y # CONFIG_HWMON_VID is not set # CONFIG_SENSORS_ABITUGURU is not set +# CONFIG_SENSORS_AD7418 is not set # CONFIG_SENSORS_ADM1021 is not set # CONFIG_SENSORS_ADM1025 is not set # CONFIG_SENSORS_ADM1026 is not set @@ -862,6 +831,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_LM90 is not set # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_MAX1619 is not set +# CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_PC87427 is not set # CONFIG_SENSORS_SMSC47M1 is not set @@ -886,11 +856,8 @@ CONFIG_HWMON=y # Multimedia devices # # CONFIG_VIDEO_DEV is not set - -# -# Digital Video Broadcasting Devices -# -# CONFIG_DVB is not set +# CONFIG_DVB_CORE is not set +CONFIG_DAB=y # # Graphics support @@ -898,12 +865,23 @@ CONFIG_HWMON=y CONFIG_BACKLIGHT_LCD_SUPPORT=y CONFIG_BACKLIGHT_CLASS_DEVICE=y CONFIG_LCD_CLASS_DEVICE=y + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set +# CONFIG_VGASTATE is not set CONFIG_FB=y CONFIG_FIRMWARE_EDID=y # CONFIG_FB_DDC is not set CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_SYS_FOPS is not set +CONFIG_FB_DEFERRED_IO=y # CONFIG_FB_SVGALIB is not set # CONFIG_FB_MACMODES is not set # CONFIG_FB_BACKLIGHT is not set @@ -921,10 +899,6 @@ CONFIG_FB_BFIN_LANDSCAPE=y # CONFIG_FB_BFIN_BGR is not set # CONFIG_FB_S1D13XXX is not set # CONFIG_FB_VIRTUAL is not set - -# -# Logo configuration -# # CONFIG_LOGO is not set # @@ -936,8 +910,6 @@ CONFIG_SOUND=y # Advanced Linux Sound Architecture # CONFIG_SND=m -CONFIG_SND_TIMER=m -CONFIG_SND_PCM=m # CONFIG_SND_SEQUENCER is not set # CONFIG_SND_MIXER_OSS is not set # CONFIG_SND_PCM_OSS is not set @@ -959,19 +931,23 @@ CONFIG_SND_PCM=m # ALSA Blackfin devices # # CONFIG_SND_BLACKFIN_AD1836 is not set -CONFIG_SND_BLACKFIN_AD1981B=m # CONFIG_SND_BFIN_AD73311 is not set # -# SoC audio support +# System on Chip audio support # # CONFIG_SND_SOC is not set +# +# SoC Audio for the ADI Blackfin +# +# CONFIG_SND_BF5XX_HAVE_COLD_RESET is not set + # # Open Sound System # CONFIG_SOUND_PRIME=y -# CONFIG_OBSOLETE_OSS is not set +# CONFIG_OSS_OBSOLETE is not set # CONFIG_SOUND_MSNDCLAS is not set # CONFIG_SOUND_MSNDPIN is not set @@ -989,18 +965,17 @@ CONFIG_USB_ARCH_HAS_HCD=y # CONFIG_USB is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# Enable Host or Gadget support to see Inventra options # # -# USB Gadget Support +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # -# CONFIG_USB_GADGET is not set # -# MMC/SD Card support +# USB Gadget Support # -# CONFIG_SPI_MMC is not set +# CONFIG_USB_GADGET is not set # CONFIG_MMC is not set # @@ -1040,44 +1015,50 @@ CONFIG_RTC_INTF_SYSFS=y CONFIG_RTC_INTF_PROC=y CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set # -# RTC drivers +# I2C RTC drivers # -# CONFIG_RTC_DRV_X1205 is not set # CONFIG_RTC_DRV_DS1307 is not set -# CONFIG_RTC_DRV_DS1553 is not set -# CONFIG_RTC_DRV_ISL1208 is not set # CONFIG_RTC_DRV_DS1672 is not set -# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_MAX6900 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_X1205 is not set # CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_PCF8583 is not set + +# +# SPI RTC drivers +# # CONFIG_RTC_DRV_RS5C348 is not set -# CONFIG_RTC_DRV_RS5C372 is not set -# CONFIG_RTC_DRV_M48T86 is not set -# CONFIG_RTC_DRV_TEST is not set # CONFIG_RTC_DRV_MAX6902 is not set -# CONFIG_RTC_DRV_V3020 is not set -CONFIG_RTC_DRV_BFIN=y # -# DMA Engine support +# Platform RTC drivers # -# CONFIG_DMA_ENGINE is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_V3020 is not set # -# DMA Clients +# on-CPU RTC drivers # +CONFIG_RTC_DRV_BFIN=y # -# DMA Devices +# DMA Engine support # +# CONFIG_DMA_ENGINE is not set # -# Auxiliary Display support +# DMA Clients # # -# Virtualization +# DMA Devices # # @@ -1176,6 +1157,7 @@ CONFIG_LOCKD=m CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=m +# CONFIG_SUNRPC_BIND34 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set CONFIG_SMB_FS=m @@ -1256,11 +1238,17 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set -CONFIG_LOG_BUF_SHIFT=14 # CONFIG_DEBUG_BUGVERBOSE is not set -# CONFIG_DEBUG_SERIAL_EARLY_INIT is not set +# CONFIG_DEBUG_MMRS is not set # CONFIG_DEBUG_HUNT_FOR_ZERO is not set +CONFIG_DEBUG_BFIN_HWTRACE_ON=y +CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF=y +# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE is not set +# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_TWO is not set +CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=0 +# CONFIG_DEBUG_BFIN_HWTRACE_EXPAND is not set # CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE is not set +# CONFIG_EARLY_PRINTK is not set # CONFIG_CPLB_INFO is not set # CONFIG_ACCESS_CHECK is not set @@ -1283,9 +1271,11 @@ CONFIG_SECURITY_CAPABILITIES=y CONFIG_BITREVERSE=y CONFIG_CRC_CCITT=m # CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y -- cgit v1.2.3-70-g09d2 From 27d875f2c134c4b26860ccdd03b4c52cce4efc2c Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Mon, 27 Aug 2007 16:08:53 +0800 Subject: Blackfin arch: vmlinux.lds.S, break up our .init into separate sections Break up our .init into separate section like all other ports do and so that we dont mix text and data (causes disassembly headaches as pointed out by Robin) Cc: Robin Getz Signed-off-by: Mike Frysinger Signed-off-by: Bryan Wu --- arch/blackfin/kernel/vmlinux.lds.S | 42 ++++++++++++++++++++++++-------------- 1 file changed, 27 insertions(+), 15 deletions(-) (limited to 'arch') diff --git a/arch/blackfin/kernel/vmlinux.lds.S b/arch/blackfin/kernel/vmlinux.lds.S index e40b66ae1b7..cd1cea05f1a 100644 --- a/arch/blackfin/kernel/vmlinux.lds.S +++ b/arch/blackfin/kernel/vmlinux.lds.S @@ -46,11 +46,11 @@ SECTIONS __text = .; _text = .; __stext = .; - *(.text.*) TEXT_TEXT SCHED_TEXT LOCK_TEXT - *(.text.lock) + KPROBES_TEXT + *(.text.*) *(.fixup) . = ALIGN(16); @@ -62,7 +62,7 @@ SECTIONS __etext = .; } - RODATA + RO_DATA(PAGE_SIZE) .data : { @@ -73,51 +73,63 @@ SECTIONS __sdata = .; . = ALIGN(THREAD_SIZE); *(.data.init_task) - DATA_DATA - *(.data.*) - CONSTRUCTORS . = ALIGN(32); *(.data.cacheline_aligned) + DATA_DATA + *(.data.*) + CONSTRUCTORS + . = ALIGN(THREAD_SIZE); __edata = .; } ___init_begin = .; - .init : + + .init.text : { . = ALIGN(PAGE_SIZE); __sinittext = .; *(.init.text) __einittext = .; + } + .init.data : + { + . = ALIGN(16); *(.init.data) + } + .init.setup : + { . = ALIGN(16); ___setup_start = .; *(.init.setup) ___setup_end = .; - ___start___param = .; - *(__param) - ___stop___param = .; + } + .initcall.init : + { ___initcall_start = .; INITCALLS ___initcall_end = .; + } + .con_initcall.init : + { ___con_initcall_start = .; *(.con_initcall.init) ___con_initcall_end = .; - ___security_initcall_start = .; - *(.security_initcall.init) - ___security_initcall_end = .; + } + SECURITY_INIT + .init.ramfs : + { . = ALIGN(4); ___initramfs_start = .; *(.init.ramfs) ___initramfs_end = .; - . = ALIGN(4); } __l1_lma_start = .; - .text_l1 L1_CODE_START : AT(LOADADDR(.init) + SIZEOF(.init)) + .text_l1 L1_CODE_START : AT(LOADADDR(.init.ramfs) + SIZEOF(.init.ramfs)) { . = ALIGN(4); __stext_l1 = .; -- cgit v1.2.3-70-g09d2 From 168f1212c098727f2509fe0f66bd30d7209a8159 Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Thu, 11 Oct 2007 00:22:35 +0800 Subject: Blackfin arch: rewrite our reboot code in C rewrite our reboot code in C rather than assembly to be like other architectures and to allow board maintainers to define custom behavior Signed-off-by: Mike Frysinger Signed-off-by: Bryan Wu --- arch/blackfin/kernel/Makefile | 2 +- arch/blackfin/kernel/bfin_gpio.c | 18 ++++++ arch/blackfin/kernel/process.c | 25 -------- arch/blackfin/mach-bf533/head.S | 60 ------------------- arch/blackfin/mach-bf537/head.S | 79 ------------------------- arch/blackfin/mach-bf548/head.S | 125 --------------------------------------- arch/blackfin/mach-bf561/head.S | 60 ------------------- 7 files changed, 19 insertions(+), 350 deletions(-) (limited to 'arch') diff --git a/arch/blackfin/kernel/Makefile b/arch/blackfin/kernel/Makefile index f429ebc3a96..ae0a2203c3d 100644 --- a/arch/blackfin/kernel/Makefile +++ b/arch/blackfin/kernel/Makefile @@ -7,7 +7,7 @@ extra-y := init_task.o vmlinux.lds obj-y := \ entry.o process.o bfin_ksyms.o ptrace.o setup.o signal.o \ sys_bfin.o time.o traps.o irqchip.o dma-mapping.o flat.o \ - fixed_code.o cplbinit.o cacheinit.o + fixed_code.o cplbinit.o cacheinit.o reboot.o obj-$(CONFIG_BF53x) += bfin_gpio.o obj-$(CONFIG_BF561) += bfin_gpio.o diff --git a/arch/blackfin/kernel/bfin_gpio.c b/arch/blackfin/kernel/bfin_gpio.c index 0182ce1fc4f..d9284d7dc9f 100644 --- a/arch/blackfin/kernel/bfin_gpio.c +++ b/arch/blackfin/kernel/bfin_gpio.c @@ -80,6 +80,7 @@ * GPIO_47 PH15 PF47 */ +#include #include #include #include @@ -888,3 +889,20 @@ void gpio_direction_output(unsigned short gpio) local_irq_restore(flags); } EXPORT_SYMBOL(gpio_direction_output); + +/* If we are booting from SPI and our board lacks a strong enough pull up, + * the core can reset and execute the bootrom faster than the resistor can + * pull the signal logically high. To work around this (common) error in + * board design, we explicitly set the pin back to GPIO mode, force /CS + * high, and wait for the electrons to do their thing. + * + * This function only makes sense to be called from reset code, but it + * lives here as we need to force all the GPIO states w/out going through + * BUG() checks and such. + */ +void bfin_gpio_reset_spi0_ssel1(void) +{ + port_setup(P_SPI0_SSEL1, GPIO_USAGE); + gpio_bankb[gpio_bank(P_SPI0_SSEL1)]->data_set = gpio_bit(P_SPI0_SSEL1); + udelay(1); +} diff --git a/arch/blackfin/kernel/process.c b/arch/blackfin/kernel/process.c index 22e79041986..de7d048bd4e 100644 --- a/arch/blackfin/kernel/process.c +++ b/arch/blackfin/kernel/process.c @@ -134,31 +134,6 @@ void cpu_idle(void) } } -void machine_restart(char *__unused) -{ -#if defined(CONFIG_BFIN_ICACHE) - bfin_write_IMEM_CONTROL(0x01); - SSYNC(); -#endif - bfin_reset(); - /* Dont do anything till the reset occurs */ - while (1) { - SSYNC(); - } -} - -void machine_halt(void) -{ - for (;;) - asm volatile ("idle"); -} - -void machine_power_off(void) -{ - for (;;) - asm volatile ("idle"); -} - void show_regs(struct pt_regs *regs) { printk(KERN_NOTICE "\n"); diff --git a/arch/blackfin/mach-bf533/head.S b/arch/blackfin/mach-bf533/head.S index 3be6feefa8a..6e1b5f6da5c 100644 --- a/arch/blackfin/mach-bf533/head.S +++ b/arch/blackfin/mach-bf533/head.S @@ -459,66 +459,6 @@ ENTRY(_start_dma_code) ENDPROC(_start_dma_code) #endif /* CONFIG_BFIN_KERNEL_CLOCK */ -ENTRY(_bfin_reset) - /* No more interrupts to be handled*/ - CLI R6; - SSYNC; - -#if defined(CONFIG_BFIN_SHARED_FLASH_ENET) - p0.h = hi(FIO_INEN); - p0.l = lo(FIO_INEN); - r0.l = ~(1 << CONFIG_ENET_FLASH_PIN); - w[p0] = r0.l; - - p0.h = hi(FIO_DIR); - p0.l = lo(FIO_DIR); - r0.l = (1 << CONFIG_ENET_FLASH_PIN); - w[p0] = r0.l; - - p0.h = hi(FIO_FLAG_C); - p0.l = lo(FIO_FLAG_C); - r0.l = (1 << CONFIG_ENET_FLASH_PIN); - w[p0] = r0.l; -#endif - - /* Clear the IMASK register */ - p0.h = hi(IMASK); - p0.l = lo(IMASK); - r0 = 0x0; - [p0] = r0; - - /* Clear the ILAT register */ - p0.h = hi(ILAT); - p0.l = lo(ILAT); - r0 = [p0]; - [p0] = r0; - SSYNC; - - /* make sure SYSCR is set to use BMODE */ - P0.h = hi(SYSCR); - P0.l = lo(SYSCR); - R0.l = 0x0; - W[P0] = R0.l; - SSYNC; - - /* issue a system soft reset */ - P1.h = hi(SWRST); - P1.l = lo(SWRST); - R1.l = 0x0007; - W[P1] = R1; - SSYNC; - - /* clear system soft reset */ - R0.l = 0x0000; - W[P0] = R0; - SSYNC; - - /* issue core reset */ - raise 1; - - RTS; -ENDPROC(_bfin_reset) - #if CONFIG_DEBUG_KERNEL_START debug_kernel_start_trap: /* Set up a temp stack in L1 - SDRAM might not be working */ diff --git a/arch/blackfin/mach-bf537/head.S b/arch/blackfin/mach-bf537/head.S index 0836bfdcc6c..2c4ae466d4e 100644 --- a/arch/blackfin/mach-bf537/head.S +++ b/arch/blackfin/mach-bf537/head.S @@ -478,85 +478,6 @@ ENTRY(_start_dma_code) ENDPROC(_start_dma_code) #endif /* CONFIG_BFIN_KERNEL_CLOCK */ -ENTRY(_bfin_reset) - /* No more interrupts to be handled*/ - CLI R6; - SSYNC; - -#if defined(CONFIG_MTD_M25P80) - /* - * The following code fix the SPI flash reboot issue, - * /CS signal of the chip which is using PF10 return to GPIO mode - */ - p0.h = hi(PORTF_FER); - p0.l = lo(PORTF_FER); - r0.l = 0x0000; - w[p0] = r0.l; - SSYNC; - - /* /CS return to high */ - p0.h = hi(PORTFIO); - p0.l = lo(PORTFIO); - r0.l = 0xFFFF; - w[p0] = r0.l; - SSYNC; - - /* Delay some time, This is necessary */ - r1.h = 0; - r1.l = 0x400; - p1 = r1; - lsetup (.L_delay_lab1, .L_delay_lab1_end) lc1 = p1; -.L_delay_lab1: - r0.h = 0; - r0.l = 0x8000; - p0 = r0; - lsetup (.L_delay_lab0, .L_delay_lab0_end) lc0 = p0; -.L_delay_lab0: - nop; -.L_delay_lab0_end: - nop; -.L_delay_lab1_end: - nop; -#endif - - /* Clear the IMASK register */ - p0.h = hi(IMASK); - p0.l = lo(IMASK); - r0 = 0x0; - [p0] = r0; - - /* Clear the ILAT register */ - p0.h = hi(ILAT); - p0.l = lo(ILAT); - r0 = [p0]; - [p0] = r0; - SSYNC; - - /* make sure SYSCR is set to use BMODE */ - P0.h = hi(SYSCR); - P0.l = lo(SYSCR); - R0.l = 0x0; - W[P0] = R0.l; - SSYNC; - - /* issue a system soft reset */ - P1.h = hi(SWRST); - P1.l = lo(SWRST); - R1.l = 0x0007; - W[P1] = R1; - SSYNC; - - /* clear system soft reset */ - R0.l = 0x0000; - W[P0] = R0; - SSYNC; - - /* issue core reset */ - raise 1; - - RTS; -ENDPROC(_bfin_reset) - .data /* diff --git a/arch/blackfin/mach-bf548/head.S b/arch/blackfin/mach-bf548/head.S index 937fbef26a5..532ed0930b5 100644 --- a/arch/blackfin/mach-bf548/head.S +++ b/arch/blackfin/mach-bf548/head.S @@ -378,131 +378,6 @@ ENTRY(_start_dma_code) RTS; #endif /* CONFIG_BFIN_KERNEL_CLOCK */ -ENTRY(_bfin_reset) - /* No more interrupts to be handled*/ - CLI R6; - SSYNC; - -#if 0 /* Need to determine later if this is here necessary for BF54x */ -#if defined(CONFIG_MTD_M25P80) -/* - * The following code fix the SPI flash reboot issue, - * /CS signal of the chip which is using PF10 return to GPIO mode - */ - p0.h = hi(PORTF_FER); - p0.l = lo(PORTF_FER); - r0.l = 0x0000; - w[p0] = r0.l; - SSYNC; - -/* /CS return to high */ - p0.h = hi(PORTFIO); - p0.l = lo(PORTFIO); - r0.l = 0xFFFF; - w[p0] = r0.l; - SSYNC; - -/* Delay some time, This is necessary */ - r1.h = 0; - r1.l = 0x400; - p1 = r1; - lsetup (_delay_lab1,_delay_lab1_end ) lc1 = p1; -_delay_lab1: - r0.h = 0; - r0.l = 0x8000; - p0 = r0; - lsetup (_delay_lab0,_delay_lab0_end ) lc0 = p0; -_delay_lab0: - nop; -_delay_lab0_end: - nop; -_delay_lab1_end: - nop; -#endif -#endif - - /* Clear the bits 13-15 in SWRST if they werent cleared */ - p0.h = hi(SWRST); - p0.l = lo(SWRST); - csync; - r0.l = w[p0]; - - /* Clear the IMASK register */ - p0.h = hi(IMASK); - p0.l = lo(IMASK); - r0 = 0x0; - [p0] = r0; - - /* Clear the ILAT register */ - p0.h = hi(ILAT); - p0.l = lo(ILAT); - r0 = [p0]; - [p0] = r0; - SSYNC; - - /* Disable the WDOG TIMER */ - p0.h = hi(WDOG_CTL); - p0.l = lo(WDOG_CTL); - r0.l = 0xAD6; - w[p0] = r0.l; - SSYNC; - - /* Clear the sticky bit incase it is already set */ - p0.h = hi(WDOG_CTL); - p0.l = lo(WDOG_CTL); - r0.l = 0x8AD6; - w[p0] = r0.l; - SSYNC; - - /* Program the count value */ - R0.l = 0x100; - R0.h = 0x0; - P0.h = hi(WDOG_CNT); - P0.l = lo(WDOG_CNT); - [P0] = R0; - SSYNC; - - /* Program WDOG_STAT if necessary */ - P0.h = hi(WDOG_CTL); - P0.l = lo(WDOG_CTL); - R0 = W[P0](Z); - CC = BITTST(R0,1); - if !CC JUMP .LWRITESTAT; - CC = BITTST(R0,2); - if !CC JUMP .LWRITESTAT; - JUMP .LSKIP_WRITE; - -.LWRITESTAT: - /* When watch dog timer is enabled, - * a write to STAT will load the contents of CNT to STAT - */ - R0 = 0x0000(z); - P0.h = hi(WDOG_STAT); - P0.l = lo(WDOG_STAT) - [P0] = R0; - SSYNC; - -.LSKIP_WRITE: - /* Enable the reset event */ - P0.h = hi(WDOG_CTL); - P0.l = lo(WDOG_CTL); - R0 = W[P0](Z); - BITCLR(R0,1); - BITCLR(R0,2); - W[P0] = R0.L; - SSYNC; - NOP; - - /* Enable the wdog counter */ - R0 = W[P0](Z); - BITCLR(R0,4); - W[P0] = R0.L; - SSYNC; - - IDLE; - - RTS; - .data /* diff --git a/arch/blackfin/mach-bf561/head.S b/arch/blackfin/mach-bf561/head.S index 139f4cff801..fd39891ae0f 100644 --- a/arch/blackfin/mach-bf561/head.S +++ b/arch/blackfin/mach-bf561/head.S @@ -406,66 +406,6 @@ ENTRY(_start_dma_code) ENDPROC(_start_dma_code) #endif /* CONFIG_BFIN_KERNEL_CLOCK */ -ENTRY(_bfin_reset) - /* No more interrupts to be handled*/ - CLI R6; - SSYNC; - -#if defined(CONFIG_BFIN_SHARED_FLASH_ENET) - p0.h = hi(FIO_INEN); - p0.l = lo(FIO_INEN); - r0.l = ~(PF1 | PF0); - w[p0] = r0.l; - - p0.h = hi(FIO_DIR); - p0.l = lo(FIO_DIR); - r0.l = (PF1 | PF0); - w[p0] = r0.l; - - p0.h = hi(FIO_FLAG_C); - p0.l = lo(FIO_FLAG_C); - r0.l = (PF1 | PF0); - w[p0] = r0.l; -#endif - - /* Clear the IMASK register */ - p0.h = hi(IMASK); - p0.l = lo(IMASK); - r0 = 0x0; - [p0] = r0; - - /* Clear the ILAT register */ - p0.h = hi(ILAT); - p0.l = lo(ILAT); - r0 = [p0]; - [p0] = r0; - SSYNC; - - /* make sure SYSCR is set to use BMODE */ - P0.h = hi(SYSCR); - P0.l = lo(SYSCR); - R0.l = 0x20; /* on BF561, disable core b */ - W[P0] = R0.l; - SSYNC; - - /* issue a system soft reset */ - P1.h = hi(SWRST); - P1.l = lo(SWRST); - R1.l = 0x0007; - W[P1] = R1; - SSYNC; - - /* clear system soft reset */ - R0.l = 0x0000; - W[P0] = R0; - SSYNC; - - /* issue core reset */ - raise 1; - - RTS; -ENDPROC(_bfin_reset) - .data /* -- cgit v1.2.3-70-g09d2 From 4d5f4ed3fb797021523fc9fb6804047e8e35b33d Mon Sep 17 00:00:00 2001 From: Michael Hennerich Date: Mon, 27 Aug 2007 16:46:17 +0800 Subject: Blackfin arch: extract gpio number from PIN function Singed-off-by: Michael Hennerich Signed-off-by: Bryan Wu --- arch/blackfin/kernel/bfin_gpio.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/blackfin/kernel/bfin_gpio.c b/arch/blackfin/kernel/bfin_gpio.c index d9284d7dc9f..0d1e87b9c93 100644 --- a/arch/blackfin/kernel/bfin_gpio.c +++ b/arch/blackfin/kernel/bfin_gpio.c @@ -902,7 +902,9 @@ EXPORT_SYMBOL(gpio_direction_output); */ void bfin_gpio_reset_spi0_ssel1(void) { - port_setup(P_SPI0_SSEL1, GPIO_USAGE); - gpio_bankb[gpio_bank(P_SPI0_SSEL1)]->data_set = gpio_bit(P_SPI0_SSEL1); + u16 gpio = P_IDENT(P_SPI0_SSEL1); + + port_setup(gpio, GPIO_USAGE); + gpio_bankb[gpio_bank(gpio)]->data_set = gpio_bit(gpio); udelay(1); } -- cgit v1.2.3-70-g09d2 From d2b11a468a49716debd96532552a72b6078f1cf5 Mon Sep 17 00:00:00 2001 From: Michael Hennerich Date: Tue, 28 Aug 2007 16:47:46 +0800 Subject: Blackfin arch: Merge GPIO/Peripheral Resource Allocation back into a single file Signed-off-by: Michael Hennerich Signed-off-by: Bryan Wu --- arch/blackfin/kernel/Makefile | 4 +- arch/blackfin/kernel/bfin_gpio.c | 225 ++++++++++++++++++++-- arch/blackfin/mach-bf548/Makefile | 2 +- arch/blackfin/mach-bf548/gpio.c | 392 -------------------------------------- 4 files changed, 216 insertions(+), 407 deletions(-) delete mode 100644 arch/blackfin/mach-bf548/gpio.c (limited to 'arch') diff --git a/arch/blackfin/kernel/Makefile b/arch/blackfin/kernel/Makefile index ae0a2203c3d..243883ec6de 100644 --- a/arch/blackfin/kernel/Makefile +++ b/arch/blackfin/kernel/Makefile @@ -7,10 +7,8 @@ extra-y := init_task.o vmlinux.lds obj-y := \ entry.o process.o bfin_ksyms.o ptrace.o setup.o signal.o \ sys_bfin.o time.o traps.o irqchip.o dma-mapping.o flat.o \ - fixed_code.o cplbinit.o cacheinit.o reboot.o + fixed_code.o cplbinit.o cacheinit.o reboot.o bfin_gpio.o -obj-$(CONFIG_BF53x) += bfin_gpio.o -obj-$(CONFIG_BF561) += bfin_gpio.o obj-$(CONFIG_MODULES) += module.o obj-$(CONFIG_BFIN_DMA_5XX) += bfin_dma_5xx.o obj-$(CONFIG_DUAL_CORE_TEST_MODULE) += dualcore_test.o diff --git a/arch/blackfin/kernel/bfin_gpio.c b/arch/blackfin/kernel/bfin_gpio.c index 0d1e87b9c93..78438d88d22 100644 --- a/arch/blackfin/kernel/bfin_gpio.c +++ b/arch/blackfin/kernel/bfin_gpio.c @@ -7,7 +7,7 @@ * Description: GPIO Abstraction Layer * * Modified: - * Copyright 2006 Analog Devices Inc. + * Copyright 2007 Analog Devices Inc. * * Bugs: Enter bugs at http://blackfin.uclinux.org/ * @@ -28,9 +28,9 @@ */ /* -* Number BF537/6/4 BF561 BF533/2/1 +* Number BF537/6/4 BF561 BF533/2/1 BF549/8/4/2 * -* GPIO_0 PF0 PF0 PF0 +* GPIO_0 PF0 PF0 PF0 PA0...PJ13 * GPIO_1 PF1 PF1 PF1 * GPIO_2 PF2 PF2 PF2 * GPIO_3 PF3 PF3 PF3 @@ -117,6 +117,21 @@ static struct gpio_port_t *gpio_bankb[gpio_bank(MAX_BLACKFIN_GPIOS)] = { }; #endif +#ifdef BF548_FAMILY +static struct gpio_port_t *gpio_array[gpio_bank(MAX_BLACKFIN_GPIOS)] = { + (struct gpio_port_t *)PORTA_FER, + (struct gpio_port_t *)PORTB_FER, + (struct gpio_port_t *)PORTC_FER, + (struct gpio_port_t *)PORTD_FER, + (struct gpio_port_t *)PORTE_FER, + (struct gpio_port_t *)PORTF_FER, + (struct gpio_port_t *)PORTG_FER, + (struct gpio_port_t *)PORTH_FER, + (struct gpio_port_t *)PORTI_FER, + (struct gpio_port_t *)PORTJ_FER, +}; +#endif + static unsigned short reserved_gpio_map[gpio_bank(MAX_BLACKFIN_GPIOS)]; static unsigned short reserved_peri_map[gpio_bank(MAX_BLACKFIN_GPIOS + 16)]; @@ -147,12 +162,24 @@ static unsigned int sic_iwr_irqs[gpio_bank(MAX_BLACKFIN_GPIOS)] = {IRQ_PROG0_INT #endif /* CONFIG_PM */ +#if defined(BF548_FAMILY) +inline int check_gpio(unsigned short gpio) +{ + if (gpio == GPIO_PB15 || gpio == GPIO_PC14 || gpio == GPIO_PC15 + || gpio == GPIO_PH14 || gpio == GPIO_PH15 + || gpio == GPIO_PJ14 || gpio == GPIO_PJ15 + || gpio > MAX_BLACKFIN_GPIOS) + return -EINVAL; + return 0; +} +#else inline int check_gpio(unsigned short gpio) { if (gpio >= MAX_BLACKFIN_GPIOS) return -EINVAL; return 0; } +#endif static void set_label(unsigned short ident, const char *label) { @@ -185,19 +212,27 @@ static int cmp_label(unsigned short ident, const char *label) static void port_setup(unsigned short gpio, unsigned short usage) { if (!check_gpio(gpio)) { - if (usage == GPIO_USAGE) { + if (usage == GPIO_USAGE) *port_fer[gpio_bank(gpio)] &= ~gpio_bit(gpio); - } else + else *port_fer[gpio_bank(gpio)] |= gpio_bit(gpio); SSYNC(); } } +#elif defined(BF548_FAMILY) +static void port_setup(unsigned short gpio, unsigned short usage) +{ + if (usage == GPIO_USAGE) + gpio_array[gpio_bank(gpio)]->port_fer &= ~gpio_bit(gpio); + else + gpio_array[gpio_bank(gpio)]->port_fer |= gpio_bit(gpio); + SSYNC(); +} #else # define port_setup(...) do { } while (0) #endif #ifdef BF537_FAMILY - static struct { unsigned short res; unsigned short offset; @@ -268,11 +303,32 @@ static void portmux_setup(unsigned short per, unsigned short function) } } } +#elif defined(BF548_FAMILY) +inline void portmux_setup(unsigned short portno, unsigned short function) +{ + u32 pmux; + + pmux = gpio_array[gpio_bank(portno)]->port_mux; + + pmux &= ~(0x3 << (2 * gpio_sub_n(portno))); + pmux |= (function & 0x3) << (2 * gpio_sub_n(portno)); + + gpio_array[gpio_bank(portno)]->port_mux = pmux; +} + +inline u16 get_portmux(unsigned short portno) +{ + u32 pmux; + pmux = gpio_array[gpio_bank(portno)]->port_mux; + + return (pmux >> (2 * gpio_sub_n(portno)) & 0x3); +} #else # define portmux_setup(...) do { } while (0) #endif +#ifndef BF548_FAMILY static void default_gpio(unsigned short gpio) { unsigned short bank, bitmask; @@ -289,6 +345,9 @@ static void default_gpio(unsigned short gpio) gpio_bankb[bank]->both &= ~bitmask; gpio_bankb[bank]->edge &= ~bitmask; } +#else +# define default_gpio(...) do { } while (0) +#endif static int __init bfin_gpio_init(void) { @@ -307,6 +366,7 @@ static int __init bfin_gpio_init(void) arch_initcall(bfin_gpio_init); +#ifndef BF548_FAMILY /*********************************************************** * * FUNCTIONS: Blackfin General Purpose Ports Access Functions @@ -658,9 +718,95 @@ void gpio_pm_restore(void) } #endif +#endif /* BF548_FAMILY */ +/*********************************************************** +* +* FUNCTIONS: Blackfin Peripheral Resource Allocation +* and PortMux Setup +* +* INPUTS/OUTPUTS: +* per Peripheral Identifier +* label String +* +* DESCRIPTION: Blackfin Peripheral Resource Allocation and Setup API +* +* CAUTION: +************************************************************* +* MODIFICATION HISTORY : +**************************************************************/ + +#ifdef BF548_FAMILY +int peripheral_request(unsigned short per, const char *label) +{ + unsigned long flags; + unsigned short ident = P_IDENT(per); + + /* + * Don't cares are pins with only one dedicated function + */ + if (per & P_DONTCARE) + return 0; + + if (!(per & P_DEFINED)) + return -ENODEV; + + if (check_gpio(ident) < 0) + return -EINVAL; + local_irq_save(flags); + + if (unlikely(reserved_gpio_map[gpio_bank(ident)] & gpio_bit(ident))) { + printk(KERN_ERR + "%s: Peripheral %d is already reserved as GPIO by %s !\n", + __FUNCTION__, ident, get_label(ident)); + dump_stack(); + local_irq_restore(flags); + return -EBUSY; + } + + if (unlikely(reserved_peri_map[gpio_bank(ident)] & gpio_bit(ident))) { + + u16 funct = get_portmux(ident); + + /* + * Pin functions like AMC address strobes my + * be requested and used by several drivers + */ + + if (!((per & P_MAYSHARE) && (funct == P_FUNCT2MUX(per)))) { + + /* + * Allow that the identical pin function can + * be requested from the same driver twice + */ + + if (cmp_label(ident, label) == 0) + goto anyway; + + printk(KERN_ERR + "%s: Peripheral %d function %d is already reserved by %s !\n", + __FUNCTION__, ident, P_FUNCT2MUX(per), get_label(ident)); + dump_stack(); + local_irq_restore(flags); + return -EBUSY; + } + } + +anyway: + reserved_peri_map[gpio_bank(ident)] |= gpio_bit(ident); + + portmux_setup(ident, P_FUNCT2MUX(per)); + port_setup(ident, PERIPHERAL_USAGE); + + local_irq_restore(flags); + set_label(ident, label); + + return 0; +} +EXPORT_SYMBOL(peripheral_request); +#else int peripheral_request(unsigned short per, const char *label) { @@ -722,8 +868,6 @@ int peripheral_request(unsigned short per, const char *label) } anyway: - - portmux_setup(per, P_FUNCT2MUX(per)); port_setup(ident, PERIPHERAL_USAGE); @@ -735,6 +879,7 @@ anyway: return 0; } EXPORT_SYMBOL(peripheral_request); +#endif int peripheral_request_list(unsigned short per[], const char *label) { @@ -805,8 +950,8 @@ EXPORT_SYMBOL(peripheral_free_list); * FUNCTIONS: Blackfin GPIO Driver * * INPUTS/OUTPUTS: -* gpio - GPIO Number between 0 and MAX_BLACKFIN_GPIOS -* +* gpio PIO Number between 0 and MAX_BLACKFIN_GPIOS +* label String * * DESCRIPTION: Blackfin GPIO Driver API * @@ -825,16 +970,27 @@ int gpio_request(unsigned short gpio, const char *label) local_irq_save(flags); if (unlikely(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio))) { - printk(KERN_ERR "bfin-gpio: GPIO %d is already reserved!\n", gpio); + printk(KERN_ERR "bfin-gpio: GPIO %d is already reserved by %s !\n", + gpio, get_label(gpio)); + dump_stack(); + local_irq_restore(flags); + return -EBUSY; + } + if (unlikely(reserved_peri_map[gpio_bank(gpio)] & gpio_bit(gpio))) { + printk(KERN_ERR + "bfin-gpio: GPIO %d is already reserved as Peripheral by %s !\n", + gpio, get_label(gpio)); dump_stack(); local_irq_restore(flags); return -EBUSY; } + reserved_gpio_map[gpio_bank(gpio)] |= gpio_bit(gpio); local_irq_restore(flags); port_setup(gpio, GPIO_USAGE); + set_label(gpio, label); return 0; } @@ -864,6 +1020,51 @@ void gpio_free(unsigned short gpio) } EXPORT_SYMBOL(gpio_free); +#ifdef BF548_FAMILY +void gpio_direction_input(unsigned short gpio) +{ + unsigned long flags; + + BUG_ON(!(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio))); + + local_irq_save(flags); + gpio_array[gpio_bank(gpio)]->port_dir_clear = gpio_bit(gpio); + gpio_array[gpio_bank(gpio)]->port_inen |= gpio_bit(gpio); + local_irq_restore(flags); +} +EXPORT_SYMBOL(gpio_direction_input); + +void gpio_direction_output(unsigned short gpio) +{ + unsigned long flags; + + BUG_ON(!(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio))); + + local_irq_save(flags); + gpio_array[gpio_bank(gpio)]->port_inen &= ~gpio_bit(gpio); + gpio_array[gpio_bank(gpio)]->port_dir_set = gpio_bit(gpio); + local_irq_restore(flags); +} +EXPORT_SYMBOL(gpio_direction_output); + +void gpio_set_value(unsigned short gpio, unsigned short arg) +{ + if (arg) + gpio_array[gpio_bank(gpio)]->port_set = gpio_bit(gpio); + else + gpio_array[gpio_bank(gpio)]->port_clear = gpio_bit(gpio); + +} +EXPORT_SYMBOL(gpio_set_value); + +unsigned short gpio_get_value(unsigned short gpio) +{ + return (1 & (gpio_array[gpio_bank(gpio)]->port_data >> gpio_sub_n(gpio))); +} +EXPORT_SYMBOL(gpio_get_value); + +#else + void gpio_direction_input(unsigned short gpio) { unsigned long flags; @@ -908,3 +1109,5 @@ void bfin_gpio_reset_spi0_ssel1(void) gpio_bankb[gpio_bank(gpio)]->data_set = gpio_bit(gpio); udelay(1); } + +#endif /*BF548_FAMILY */ diff --git a/arch/blackfin/mach-bf548/Makefile b/arch/blackfin/mach-bf548/Makefile index 060ad78ebf1..7e7c9c8ac5b 100644 --- a/arch/blackfin/mach-bf548/Makefile +++ b/arch/blackfin/mach-bf548/Makefile @@ -4,6 +4,6 @@ extra-y := head.o -obj-y := ints-priority.o dma.o gpio.o +obj-y := ints-priority.o dma.o obj-$(CONFIG_CPU_FREQ) += cpu.o diff --git a/arch/blackfin/mach-bf548/gpio.c b/arch/blackfin/mach-bf548/gpio.c deleted file mode 100644 index 390dd8c1243..00000000000 --- a/arch/blackfin/mach-bf548/gpio.c +++ /dev/null @@ -1,392 +0,0 @@ -/* - * File: arch/blackfin/mach-bf548/gpio.c - * Based on: - * Author: Michael Hennerich (hennerich@blackfin.uclinux.org) - * - * Created: - * Description: GPIO Abstraction Layer - * - * Modified: - * Copyright 2007 Analog Devices Inc. - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, see the file COPYING, or write - * to the Free Software Foundation, Inc., - * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include -#include -#include -#include -#include -#include - -static struct gpio_port_t *gpio_array[gpio_bank(MAX_BLACKFIN_GPIOS)] = { - (struct gpio_port_t *)PORTA_FER, - (struct gpio_port_t *)PORTB_FER, - (struct gpio_port_t *)PORTC_FER, - (struct gpio_port_t *)PORTD_FER, - (struct gpio_port_t *)PORTE_FER, - (struct gpio_port_t *)PORTF_FER, - (struct gpio_port_t *)PORTG_FER, - (struct gpio_port_t *)PORTH_FER, - (struct gpio_port_t *)PORTI_FER, - (struct gpio_port_t *)PORTJ_FER, -}; - -static unsigned short reserved_gpio_map[gpio_bank(MAX_BLACKFIN_GPIOS)]; -static unsigned short reserved_peri_map[gpio_bank(MAX_BLACKFIN_GPIOS)]; - -#define MAX_RESOURCES 256 -#define RESOURCE_LABEL_SIZE 16 - -struct str_ident { - char name[RESOURCE_LABEL_SIZE]; -} *str_ident; - -inline int check_gpio(unsigned short gpio) -{ - if (gpio == GPIO_PB15 || gpio == GPIO_PC14 || gpio == GPIO_PC15 - || gpio == GPIO_PH14 || gpio == GPIO_PH15 - || gpio == GPIO_PJ14 || gpio == GPIO_PJ15 - || gpio > MAX_BLACKFIN_GPIOS) - return -EINVAL; - return 0; -} - -inline void portmux_setup(unsigned short portno, unsigned short function) -{ - u32 pmux; - - pmux = gpio_array[gpio_bank(portno)]->port_mux; - - pmux &= ~(0x3 << (2 * gpio_sub_n(portno))); - pmux |= (function & 0x3) << (2 * gpio_sub_n(portno)); - - gpio_array[gpio_bank(portno)]->port_mux = pmux; -} - -inline u16 get_portmux(unsigned short portno) -{ - u32 pmux; - - pmux = gpio_array[gpio_bank(portno)]->port_mux; - - return (pmux >> (2 * gpio_sub_n(portno)) & 0x3); -} - -static void port_setup(unsigned short gpio, unsigned short usage) -{ - if (usage == GPIO_USAGE) { - gpio_array[gpio_bank(gpio)]->port_fer &= ~gpio_bit(gpio); - } else - gpio_array[gpio_bank(gpio)]->port_fer |= gpio_bit(gpio); - SSYNC(); -} - -static int __init bfin_gpio_init(void) -{ - - str_ident = kcalloc(MAX_RESOURCES, - sizeof(struct str_ident), GFP_KERNEL); - if (str_ident == NULL) - return -ENOMEM; - - memset(str_ident, 0, MAX_RESOURCES * sizeof(struct str_ident)); - - printk(KERN_INFO "Blackfin GPIO Controller\n"); - - return 0; -} - -arch_initcall(bfin_gpio_init); - -static void set_label(unsigned short ident, const char *label) -{ - - if (label && str_ident) { - strncpy(str_ident[ident].name, label, - RESOURCE_LABEL_SIZE); - str_ident[ident].name[RESOURCE_LABEL_SIZE - 1] = 0; - } -} - -static char *get_label(unsigned short ident) -{ - if (!str_ident) - return "UNKNOWN"; - - return (*str_ident[ident].name ? str_ident[ident].name : "UNKNOWN"); -} - -static int cmp_label(unsigned short ident, const char *label) -{ - if (label && str_ident) - return strncmp(str_ident[ident].name, - label, strlen(label)); - else - return -EINVAL; -} - -int peripheral_request(unsigned short per, const char *label) -{ - unsigned long flags; - unsigned short ident = P_IDENT(per); - - /* - * Don't cares are pins with only one dedicated function - */ - - if (per & P_DONTCARE) - return 0; - - if (!(per & P_DEFINED)) - return -ENODEV; - - if (check_gpio(ident) < 0) - return -EINVAL; - - local_irq_save(flags); - - if (unlikely(reserved_gpio_map[gpio_bank(ident)] & gpio_bit(ident))) { - printk(KERN_ERR - "%s: Peripheral %d is already reserved as GPIO by %s !\n", - __FUNCTION__, ident, get_label(ident)); - dump_stack(); - local_irq_restore(flags); - return -EBUSY; - } - - if (unlikely(reserved_peri_map[gpio_bank(ident)] & gpio_bit(ident))) { - - u16 funct = get_portmux(ident); - - /* - * Pin functions like AMC address strobes my - * be requested and used by several drivers - */ - - if (!((per & P_MAYSHARE) && (funct == P_FUNCT2MUX(per)))) { - - /* - * Allow that the identical pin function can - * be requested from the same driver twice - */ - - if (cmp_label(ident, label) == 0) - goto anyway; - - printk(KERN_ERR - "%s: Peripheral %d function %d is already reserved by %s !\n", - __FUNCTION__, ident, P_FUNCT2MUX(per), get_label(ident)); - dump_stack(); - local_irq_restore(flags); - return -EBUSY; - } - } - -anyway: - reserved_peri_map[gpio_bank(ident)] |= gpio_bit(ident); - - portmux_setup(ident, P_FUNCT2MUX(per)); - port_setup(ident, PERIPHERAL_USAGE); - - local_irq_restore(flags); - set_label(ident, label); - - return 0; -} -EXPORT_SYMBOL(peripheral_request); - -int peripheral_request_list(unsigned short per[], const char *label) -{ - u16 cnt; - int ret; - - for (cnt = 0; per[cnt] != 0; cnt++) { - - ret = peripheral_request(per[cnt], label); - - if (ret < 0) { - for ( ; cnt > 0; cnt--) { - peripheral_free(per[cnt - 1]); - } - return ret; - } - } - - - return 0; -} -EXPORT_SYMBOL(peripheral_request_list); - -void peripheral_free(unsigned short per) -{ - unsigned long flags; - unsigned short ident = P_IDENT(per); - - if (per & P_DONTCARE) - return; - - if (!(per & P_DEFINED)) - return; - - if (check_gpio(ident) < 0) - return; - - local_irq_save(flags); - - if (unlikely(!(reserved_peri_map[gpio_bank(ident)] & gpio_bit(ident)))) { - local_irq_restore(flags); - return; - } - - if (!(per & P_MAYSHARE)) { - port_setup(ident, GPIO_USAGE); - } - - reserved_peri_map[gpio_bank(ident)] &= ~gpio_bit(ident); - - local_irq_restore(flags); -} -EXPORT_SYMBOL(peripheral_free); - -void peripheral_free_list(unsigned short per[]) -{ - u16 cnt; - - for (cnt = 0; per[cnt] != 0; cnt++) { - peripheral_free(per[cnt]); - } - -} -EXPORT_SYMBOL(peripheral_free_list); - -/*********************************************************** -* -* FUNCTIONS: Blackfin GPIO Driver -* -* INPUTS/OUTPUTS: -* gpio - GPIO Number between 0 and MAX_BLACKFIN_GPIOS -* -* -* DESCRIPTION: Blackfin GPIO Driver API -* -* CAUTION: -************************************************************* -* MODIFICATION HISTORY : -**************************************************************/ - -int gpio_request(unsigned short gpio, const char *label) -{ - unsigned long flags; - - if (check_gpio(gpio) < 0) - return -EINVAL; - - local_irq_save(flags); - - if (unlikely(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio))) { - printk(KERN_ERR "bfin-gpio: GPIO %d is already reserved by %s !\n", - gpio, get_label(gpio)); - dump_stack(); - local_irq_restore(flags); - return -EBUSY; - } - - if (unlikely(reserved_peri_map[gpio_bank(gpio)] & gpio_bit(gpio))) { - printk(KERN_ERR - "bfin-gpio: GPIO %d is already reserved as Peripheral by %s !\n", - gpio, get_label(gpio)); - dump_stack(); - local_irq_restore(flags); - return -EBUSY; - } - - reserved_gpio_map[gpio_bank(gpio)] |= gpio_bit(gpio); - - local_irq_restore(flags); - - port_setup(gpio, GPIO_USAGE); - set_label(gpio, label); - - return 0; -} -EXPORT_SYMBOL(gpio_request); - -void gpio_free(unsigned short gpio) -{ - unsigned long flags; - - if (check_gpio(gpio) < 0) - return; - - local_irq_save(flags); - - if (unlikely(!(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio)))) { - printk(KERN_ERR "bfin-gpio: GPIO %d wasn't reserved!\n", gpio); - dump_stack(); - local_irq_restore(flags); - return; - } - - reserved_gpio_map[gpio_bank(gpio)] &= ~gpio_bit(gpio); - - local_irq_restore(flags); -} -EXPORT_SYMBOL(gpio_free); - -void gpio_direction_input(unsigned short gpio) -{ - unsigned long flags; - - BUG_ON(!(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio))); - - local_irq_save(flags); - gpio_array[gpio_bank(gpio)]->port_dir_clear = gpio_bit(gpio); - gpio_array[gpio_bank(gpio)]->port_inen |= gpio_bit(gpio); - local_irq_restore(flags); -} -EXPORT_SYMBOL(gpio_direction_input); - -void gpio_direction_output(unsigned short gpio) -{ - unsigned long flags; - - BUG_ON(!(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio))); - - local_irq_save(flags); - gpio_array[gpio_bank(gpio)]->port_inen &= ~gpio_bit(gpio); - gpio_array[gpio_bank(gpio)]->port_dir_set = gpio_bit(gpio); - local_irq_restore(flags); -} -EXPORT_SYMBOL(gpio_direction_output); - -void gpio_set_value(unsigned short gpio, unsigned short arg) -{ - if (arg) - gpio_array[gpio_bank(gpio)]->port_set = gpio_bit(gpio); - else - gpio_array[gpio_bank(gpio)]->port_clear = gpio_bit(gpio); - -} -EXPORT_SYMBOL(gpio_set_value); - -unsigned short gpio_get_value(unsigned short gpio) -{ - return (1 & (gpio_array[gpio_bank(gpio)]->port_data >> gpio_sub_n(gpio))); -} -EXPORT_SYMBOL(gpio_get_value); -- cgit v1.2.3-70-g09d2 From 02f13f9d5c1d3104c5c4e7f4ae30c43d595d1d75 Mon Sep 17 00:00:00 2001 From: Robin Getz Date: Mon, 27 Aug 2007 17:38:40 +0800 Subject: Blackfin arch: Remove cruft - CONFIG_DEBUG_SERIAL_EARLY_INIT didn't work that well with DEBUG_KERNEL_START Signed-off-by: Robin Getz Signed-off-by: Bryan Wu --- arch/blackfin/kernel/setup.c | 5 - arch/blackfin/mach-bf533/head.S | 243 ---------------------------------------- 2 files changed, 248 deletions(-) (limited to 'arch') diff --git a/arch/blackfin/kernel/setup.c b/arch/blackfin/kernel/setup.c index 448e6aab73a..dfc464d8048 100644 --- a/arch/blackfin/kernel/setup.c +++ b/arch/blackfin/kernel/setup.c @@ -192,11 +192,6 @@ void __init setup_arch(char **cmdline_p) } #endif -#ifdef DEBUG_SERIAL_EARLY_INIT - bfin_console_init(); /* early console registration */ - /* this give a chance to get printk() working before crash. */ -#endif - printk(KERN_INFO "Hardware Trace "); if (bfin_read_TBUFCTL() & 0x1 ) printk("Active "); diff --git a/arch/blackfin/mach-bf533/head.S b/arch/blackfin/mach-bf533/head.S index 6e1b5f6da5c..fa6dc0d8593 100644 --- a/arch/blackfin/mach-bf533/head.S +++ b/arch/blackfin/mach-bf533/head.S @@ -35,9 +35,6 @@ #include #include #endif -#if CONFIG_DEBUG_KERNEL_START -#include -#endif .global __rambase .global __ramstart @@ -104,36 +101,6 @@ ENTRY(__start) P0 = R1; R0 = R1; -#if CONFIG_DEBUG_KERNEL_START - -/* - * Set up a temporary Event Vector Table, so if something bad happens before - * the kernel is fully started, it doesn't vector off into the bootloaders - * table - */ - P0.l = lo(EVT2); - P0.h = hi(EVT2); - P1.l = lo(EVT15); - P1.h = hi(EVT15); - P2.l = debug_kernel_start_trap; - P2.h = debug_kernel_start_trap; - - RTS = P2; - RTI = P2; - RTX = P2; - RTN = P2; - RTE = P2; - -.Lfill_temp_vector_table: - [P0++] = P2; /* Core Event Vector Table */ - CC = P0 == P1; - if !CC JUMP .Lfill_temp_vector_table - P0 = r0; - P1 = r0; - P2 = r0; - -#endif - p0.h = hi(FIO_MASKA_C); p0.l = lo(FIO_MASKA_C); r0 = 0xFFFF(Z); @@ -459,216 +426,6 @@ ENTRY(_start_dma_code) ENDPROC(_start_dma_code) #endif /* CONFIG_BFIN_KERNEL_CLOCK */ -#if CONFIG_DEBUG_KERNEL_START -debug_kernel_start_trap: - /* Set up a temp stack in L1 - SDRAM might not be working */ - P0.L = lo(L1_DATA_A_START + 0x100); - P0.H = hi(L1_DATA_A_START + 0x100); - SP = P0; - - /* Make sure the Clocks are the way I think they should be */ - r0 = CONFIG_VCO_MULT & 63; /* Load the VCO multiplier */ - r0 = r0 << 9; /* Shift it over, */ - r1 = CLKIN_HALF; /* Do we need to divide CLKIN by 2?*/ - r0 = r1 | r0; - r1 = PLL_BYPASS; /* Bypass the PLL? */ - r1 = r1 << 8; /* Shift it over */ - r0 = r1 | r0; /* add them all together */ - - p0.h = hi(PLL_CTL); - p0.l = lo(PLL_CTL); /* Load the address */ - cli r2; /* Disable interrupts */ - ssync; - w[p0] = r0.l; /* Set the value */ - idle; /* Wait for the PLL to stablize */ - sti r2; /* Enable interrupts */ - -.Lcheck_again1: - p0.h = hi(PLL_STAT); - p0.l = lo(PLL_STAT); - R0 = W[P0](Z); - CC = BITTST(R0,5); - if ! CC jump .Lcheck_again1; - - /* Configure SCLK & CCLK Dividers */ - r0 = (CONFIG_CCLK_ACT_DIV | CONFIG_SCLK_DIV); - p0.h = hi(PLL_DIV); - p0.l = lo(PLL_DIV); - w[p0] = r0.l; - ssync; - - /* Make sure UART is enabled - you can never be sure */ - -/* - * Setup for console. Argument comes from the menuconfig - */ - -#ifdef CONFIG_BAUD_9600 -#define CONSOLE_BAUD_RATE 9600 -#elif CONFIG_BAUD_19200 -#define CONSOLE_BAUD_RATE 19200 -#elif CONFIG_BAUD_38400 -#define CONSOLE_BAUD_RATE 38400 -#elif CONFIG_BAUD_57600 -#define CONSOLE_BAUD_RATE 57600 -#elif CONFIG_BAUD_115200 -#define CONSOLE_BAUD_RATE 115200 -#endif - - p0.h = hi(UART_GCTL); - p0.l = lo(UART_GCTL); - r0 = 0x00(Z); - w[p0] = r0.L; /* To Turn off UART clocks */ - ssync; - - p0.h = hi(UART_LCR); - p0.l = lo(UART_LCR); - r0 = 0x83(Z); - w[p0] = r0.L; /* To enable DLL writes */ - ssync; - - R1 = (((CONFIG_CLKIN_HZ * CONFIG_VCO_MULT) / CONFIG_SCLK_DIV) / (CONSOLE_BAUD_RATE * 16)); - - p0.h = hi(UART_DLL); - p0.l = lo(UART_DLL); - r0 = 0xFF(Z); - r0 = R1 & R0; - w[p0] = r0.L; - ssync; - - p0.h = hi(UART_DLH); - p0.l = lo(UART_DLH); - r1 >>= 8 ; - w[p0] = r1.L; - ssync; - - p0.h = hi(UART_GCTL); - p0.l = lo(UART_GCTL); - r0 = 0x0(Z); - w[p0] = r0.L; /* To enable UART clock */ - ssync; - - p0.h = hi(UART_LCR); - p0.l = lo(UART_LCR); - r0 = 0x03(Z); - w[p0] = r0.L; /* To Turn on UART */ - ssync; - - p0.h = hi(UART_GCTL); - p0.l = lo(UART_GCTL); - r0 = 0x01(Z); - w[p0] = r0.L; /* To Turn on UART Clocks */ - ssync; - - P0.h = hi(UART_THR); - P0.l = lo(UART_THR); - P1.h = hi(UART_LSR); - P1.l = lo(UART_LSR); - - R0.L = 'K'; - call .Lwait_char; - R0.L='e'; - call .Lwait_char; - R0.L='r'; - call .Lwait_char; - R0.L='n' - call .Lwait_char; - R0.L='e' - call .Lwait_char; - R0.L='l'; - call .Lwait_char; - R0.L=' '; - call .Lwait_char; - R0.L='c'; - call .Lwait_char; - R0.L='r'; - call .Lwait_char; - R0.L='a'; - call .Lwait_char; - R0.L='s'; - call .Lwait_char; - R0.L='h'; - call .Lwait_char; - R0.L='\r'; - call .Lwait_char; - R0.L='\n'; - call .Lwait_char; - - R0.L='S'; - call .Lwait_char; - R0.L='E'; - call .Lwait_char; - R0.L='Q' - call .Lwait_char; - R0.L='S' - call .Lwait_char; - R0.L='T'; - call .Lwait_char; - R0.L='A'; - call .Lwait_char; - R0.L='T'; - call .Lwait_char; - R0.L='='; - call .Lwait_char; - R2 = SEQSTAT; - call .Ldump_reg; - - R0.L=' '; - call .Lwait_char; - R0.L='R'; - call .Lwait_char; - R0.L='E' - call .Lwait_char; - R0.L='T' - call .Lwait_char; - R0.L='X'; - call .Lwait_char; - R0.L='='; - call .Lwait_char; - R2 = RETX; - call .Ldump_reg; - - R0.L='\r'; - call .Lwait_char; - R0.L='\n'; - call .Lwait_char; - -.Ldebug_kernel_start_trap_done: - JUMP .Ldebug_kernel_start_trap_done; -.Ldump_reg: - R3 = 32; - R4 = 0x0F; - R5 = ':'; /* one past 9 */ - -.Ldump_reg2: - R0 = R2; - R3 += -4; - R0 >>>= R3; - R0 = R0 & R4; - R0 += 0x30; - CC = R0 <= R5; - if CC JUMP .Ldump_reg1; - R0 += 7; - -.Ldump_reg1: - R1.l = W[P1]; - CC = BITTST(R1, 5); - if !CC JUMP .Ldump_reg1; - W[P0] = r0; - - CC = R3 == 0; - if !CC JUMP .Ldump_reg2 - RTS; - -.Lwait_char: - R1.l = W[P1]; - CC = BITTST(R1, 5); - if !CC JUMP .Lwait_char; - W[P0] = r0; - RTS; - -#endif /* CONFIG_DEBUG_KERNEL_START */ - .data /* -- cgit v1.2.3-70-g09d2 From 2acde902301f73e824101e5ca9eb95dc733dc17d Mon Sep 17 00:00:00 2001 From: Michael Hennerich Date: Thu, 11 Oct 2007 00:24:40 +0800 Subject: Blackfin arch: a few things still use bfin_read_PORT_FER() - Update gpio_request to allow multiple request with the same signature (label) - Use generic GPIO API where applicable - Update generic board support form stamp board Signed-off-by: Michael Hennerich Signed-off-by: Bryan Wu --- arch/blackfin/kernel/bfin_gpio.c | 15 +++++++++++++++ 1 file changed, 15 insertions(+) (limited to 'arch') diff --git a/arch/blackfin/kernel/bfin_gpio.c b/arch/blackfin/kernel/bfin_gpio.c index 78438d88d22..b58b0de3c90 100644 --- a/arch/blackfin/kernel/bfin_gpio.c +++ b/arch/blackfin/kernel/bfin_gpio.c @@ -930,6 +930,8 @@ void peripheral_free(unsigned short per) reserved_peri_map[gpio_bank(ident)] &= ~gpio_bit(ident); + set_label(ident, "free"); + local_irq_restore(flags); } EXPORT_SYMBOL(peripheral_free); @@ -969,6 +971,17 @@ int gpio_request(unsigned short gpio, const char *label) local_irq_save(flags); + /* + * Allow that the identical GPIO can + * be requested from the same driver twice + * Do nothing and return - + */ + + if (cmp_label(gpio, label) == 0) { + local_irq_restore(flags); + return 0; + } + if (unlikely(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio))) { printk(KERN_ERR "bfin-gpio: GPIO %d is already reserved by %s !\n", gpio, get_label(gpio)); @@ -1016,6 +1029,8 @@ void gpio_free(unsigned short gpio) reserved_gpio_map[gpio_bank(gpio)] &= ~gpio_bit(gpio); + set_label(gpio, "free"); + local_irq_restore(flags); } EXPORT_SYMBOL(gpio_free); -- cgit v1.2.3-70-g09d2 From eabb5a5e0b1ff6b7d36ac80bf39773fa6a0fc872 Mon Sep 17 00:00:00 2001 From: Michael Hennerich Date: Tue, 28 Aug 2007 14:57:05 +0800 Subject: Blackfin arch: Remove legacy support Now that there is a generic GPIO driver framework remove GPIO register unified name space legacy support. Signed-off-by: Michael Hennerich Signed-off-by: Bryan Wu --- arch/blackfin/mach-bf537/Kconfig | 27 --- include/asm-blackfin/mach-bf537/blackfin.h | 278 ----------------------------- 2 files changed, 305 deletions(-) (limited to 'arch') diff --git a/arch/blackfin/mach-bf537/Kconfig b/arch/blackfin/mach-bf537/Kconfig index cc9ae38a4dd..e6648db0951 100644 --- a/arch/blackfin/mach-bf537/Kconfig +++ b/arch/blackfin/mach-bf537/Kconfig @@ -2,33 +2,6 @@ if (BF537 || BF534 || BF536) menu "BF537 Specific Configuration" -comment "PORT F/G Selection" -choice - prompt "Select BF537/6/4 default GPIO PFx PORTx" - help - Quick Hack for BF537/6/4 default GPIO PFx PORTF. - -config BF537_PORT_F - bool "Select BF537/6/4 default GPIO PFx PORTF" - depends on (BF537 || BF536 || BF534) - help - Quick Hack for BF537/6/4 default GPIO PFx PORTF. - -config BF537_PORT_G - bool "Select BF537/6/4 default GPIO PFx PORTG" - depends on (BF537 || BF536 || BF534) - help - Quick Hack for BF537/6/4 default GPIO PFx PORTG. - -config BF537_PORT_H - bool "Select BF537/6/4 default GPIO PFx PORTH" - depends on (BF537 || BF536 || BF534) - help - Quick Hack for BF537/6/4 default GPIO PFx PORTH - Use only when Blackfin EMAC support is not required. - -endchoice - comment "Interrupt Priority Assignment" menu "Priority" diff --git a/include/asm-blackfin/mach-bf537/blackfin.h b/include/asm-blackfin/mach-bf537/blackfin.h index f196588a3ad..53fcfa3408d 100644 --- a/include/asm-blackfin/mach-bf537/blackfin.h +++ b/include/asm-blackfin/mach-bf537/blackfin.h @@ -143,284 +143,6 @@ #define bfin_write_STOPCK_OFF(val) bfin_write_STOPCK(val) #define STOPCK_OFF STOPCK -/* FIO USE PORT F*/ -#ifdef CONFIG_BF537_PORT_F -#define bfin_read_PORT_FER() bfin_read_PORTF_FER() -#define bfin_write_PORT_FER(val) bfin_write_PORTF_FER(val) -#define bfin_read_FIO_FLAG_D() bfin_read_PORTFIO() -#define bfin_write_FIO_FLAG_D(val) bfin_write_PORTFIO(val) -#define bfin_read_FIO_FLAG_C() bfin_read_PORTFIO_CLEAR() -#define bfin_write_FIO_FLAG_C(val) bfin_write_PORTFIO_CLEAR(val) -#define bfin_read_FIO_FLAG_S() bfin_read_PORTFIO_SET() -#define bfin_write_FIO_FLAG_S(val) bfin_write_PORTFIO_SET(val) -#define bfin_read_FIO_FLAG_T() bfin_read_PORTFIO_TOGGLE() -#define bfin_write_FIO_FLAG_T(val) bfin_write_PORTFIO_TOGGLE(val) -#define bfin_read_FIO_MASKA_D() bfin_read_PORTFIO_MASKA() -#define bfin_write_FIO_MASKA_D(val) bfin_write_PORTFIO_MASKA(val) -#define bfin_read_FIO_MASKA_C() bfin_read_PORTFIO_MASKA_CLEAR() -#define bfin_write_FIO_MASKA_C(val) bfin_write_PORTFIO_MASKA_CLEAR(val) -#define bfin_read_FIO_MASKA_S() bfin_read_PORTFIO_MASKA_SET() -#define bfin_write_FIO_MASKA_S(val) bfin_write_PORTFIO_MASKA_SET(val) -#define bfin_read_FIO_MASKA_T() bfin_read_PORTFIO_MASKA_TOGGLE() -#define bfin_write_FIO_MASKA_T(val) bfin_write_PORTFIO_MASKA_TOGGLE(val) -#define bfin_read_FIO_MASKB_D() bfin_read_PORTFIO_MASKB() -#define bfin_write_FIO_MASKB_D(val) bfin_write_PORTFIO_MASKB(val) -#define bfin_read_FIO_MASKB_C() bfin_read_PORTFIO_MASKB_CLEAR() -#define bfin_write_FIO_MASKB_C(val) bfin_write_PORTFIO_MASKB_CLEAR(val) -#define bfin_read_FIO_MASKB_S() bfin_read_PORTFIO_MASKB_SET() -#define bfin_write_FIO_MASKB_S(val) bfin_write_PORTFIO_MASKB_SET(val) -#define bfin_read_FIO_MASKB_T() bfin_read_PORTFIO_MASKB_TOGGLE() -#define bfin_write_FIO_MASKB_T(val) bfin_write_PORTFIO_MASKB_TOGGLE(val) -#define bfin_read_FIO_DIR() bfin_read_PORTFIO_DIR() -#define bfin_write_FIO_DIR(val) bfin_write_PORTFIO_DIR(val) -#define bfin_read_FIO_POLAR() bfin_read_PORTFIO_POLAR() -#define bfin_write_FIO_POLAR(val) bfin_write_PORTFIO_POLAR(val) -#define bfin_read_FIO_EDGE() bfin_read_PORTFIO_EDGE() -#define bfin_write_FIO_EDGE(val) bfin_write_PORTFIO_EDGE(val) -#define bfin_read_FIO_BOTH() bfin_read_PORTFIO_BOTH() -#define bfin_write_FIO_BOTH(val) bfin_write_PORTFIO_BOTH(val) -#define bfin_read_FIO_INEN() bfin_read_PORTFIO_INEN() -#define bfin_write_FIO_INEN(val) bfin_write_PORTFIO_INEN(val) - -#define bfin_read_FIO_FLAG_D() bfin_read_PORTFIO() -#define bfin_write_FIO_FLAG_D(val) bfin_write_PORTFIO(val) -#define FIO_FLAG_D PORTFIO -#define bfin_read_FIO_FLAG_C() bfin_read_PORTFIO_CLEAR() -#define bfin_write_FIO_FLAG_C(val) bfin_write_PORTFIO_CLEAR(val) -#define FIO_FLAG_C PORTFIO_CLEAR -#define bfin_read_FIO_FLAG_S() bfin_read_PORTFIO_SET() -#define bfin_write_FIO_FLAG_S(val) bfin_write_PORTFIO_SET(val) -#define FIO_FLAG_S PORTFIO_SET -#define bfin_read_FIO_FLAG_T() bfin_read_PORTFIO_TOGGLE() -#define bfin_write_FIO_FLAG_T(val) bfin_write_PORTFIO_TOGGLE(val) -#define FIO_FLAG_T PORTFIO_TOGGLE -#define bfin_read_FIO_MASKA_D() bfin_read_PORTFIO_MASKA() -#define bfin_write_FIO_MASKA_D(val) bfin_write_PORTFIO_MASKA(val) -#define FIO_MASKA_D PORTFIO_MASKA -#define bfin_read_FIO_MASKA_C() bfin_read_PORTFIO_MASKA_CLEAR() -#define bfin_write_FIO_MASKA_C(val) bfin_write_PORTFIO_MASKA_CLEAR(val) -#define FIO_MASKA_C PORTFIO_MASKA_CLEAR -#define bfin_read_FIO_MASKA_S() bfin_read_PORTFIO_MASKA_SET() -#define bfin_write_FIO_MASKA_S(val) bfin_write_PORTFIO_MASKA_SET(val) -#define FIO_MASKA_S PORTFIO_MASKA_SET -#define bfin_read_FIO_MASKA_T() bfin_read_PORTFIO_MASKA_TOGGLE() -#define bfin_write_FIO_MASKA_T(val) bfin_write_PORTFIO_MASKA_TOGGLE(val) -#define FIO_MASKA_T PORTFIO_MASKA_TOGGLE -#define bfin_read_FIO_MASKB_D() bfin_read_PORTFIO_MASKB() -#define bfin_write_FIO_MASKB_D(val) bfin_write_PORTFIO_MASKB(val) -#define FIO_MASKB_D PORTFIO_MASKB -#define bfin_read_FIO_MASKB_C() bfin_read_PORTFIO_MASKB_CLEAR() -#define bfin_write_FIO_MASKB_C(val) bfin_write_PORTFIO_MASKB_CLEAR(val) -#define FIO_MASKB_C PORTFIO_MASKB_CLEAR -#define bfin_read_FIO_MASKB_S() bfin_read_PORTFIO_MASKB_SET() -#define bfin_write_FIO_MASKB_S(val) bfin_write_PORTFIO_MASKB_SET(val) -#define FIO_MASKB_S PORTFIO_MASKB_SET -#define bfin_read_FIO_MASKB_T() bfin_read_PORTFIO_MASKB_TOGGLE() -#define bfin_write_FIO_MASKB_T(val) bfin_write_PORTFIO_MASKB_TOGGLE(val) -#define FIO_MASKB_T PORTFIO_MASKB_TOGGLE -#define bfin_read_FIO_DIR() bfin_read_PORTFIO_DIR() -#define bfin_write_FIO_DIR(val) bfin_write_PORTFIO_DIR(val) -#define FIO_DIR PORTFIO_DIR -#define bfin_read_FIO_POLAR() bfin_read_PORTFIO_POLAR() -#define bfin_write_FIO_POLAR(val) bfin_write_PORTFIO_POLAR(val) -#define FIO_POLAR PORTFIO_POLAR -#define bfin_read_FIO_EDGE() bfin_read_PORTFIO_EDGE() -#define bfin_write_FIO_EDGE(val) bfin_write_PORTFIO_EDGE(val) -#define FIO_EDGE PORTFIO_EDGE -#define bfin_read_FIO_BOTH() bfin_read_PORTFIO_BOTH() -#define bfin_write_FIO_BOTH(val) bfin_write_PORTFIO_BOTH(val) -#define FIO_BOTH PORTFIO_BOTH -#define bfin_read_FIO_INEN() bfin_read_PORTFIO_INEN() -#define bfin_write_FIO_INEN(val) bfin_write_PORTFIO_INEN(val) -#define FIO_INEN PORTFIO_INEN -#endif - -/* FIO USE PORT G*/ -#ifdef CONFIG_BF537_PORT_G -#define bfin_read_PORT_FER() bfin_read_PORTG_FER() -#define bfin_write_PORT_FER(val) bfin_write_PORTG_FER(val) -#define bfin_read_FIO_FLAG_D() bfin_read_PORTGIO() -#define bfin_write_FIO_FLAG_D(val) bfin_write_PORTGIO(val) -#define bfin_read_FIO_FLAG_C() bfin_read_PORTGIO_CLEAR() -#define bfin_write_FIO_FLAG_C(val) bfin_write_PORTGIO_CLEAR(val) -#define bfin_read_FIO_FLAG_S() bfin_read_PORTGIO_SET() -#define bfin_write_FIO_FLAG_S(val) bfin_write_PORTGIO_SET(val) -#define bfin_read_FIO_FLAG_T() bfin_read_PORTGIO_TOGGLE() -#define bfin_write_FIO_FLAG_T(val) bfin_write_PORTGIO_TOGGLE(val) -#define bfin_read_FIO_MASKA_D() bfin_read_PORTGIO_MASKA() -#define bfin_write_FIO_MASKA_D(val) bfin_write_PORTGIO_MASKA(val) -#define bfin_read_FIO_MASKA_C() bfin_read_PORTGIO_MASKA_CLEAR() -#define bfin_write_FIO_MASKA_C(val) bfin_write_PORTGIO_MASKA_CLEAR(val) -#define bfin_read_FIO_MASKA_S() bfin_read_PORTGIO_MASKA_SET() -#define bfin_write_FIO_MASKA_S(val) bfin_write_PORTGIO_MASKA_SET(val) -#define bfin_read_FIO_MASKA_T() bfin_read_PORTGIO_MASKA_TOGGLE() -#define bfin_write_FIO_MASKA_T(val) bfin_write_PORTGIO_MASKA_TOGGLE(val) -#define bfin_read_FIO_MASKB_D() bfin_read_PORTGIO_MASKB() -#define bfin_write_FIO_MASKB_D(val) bfin_write_PORTGIO_MASKB(val) -#define bfin_read_FIO_MASKB_C() bfin_read_PORTGIO_MASKB_CLEAR() -#define bfin_write_FIO_MASKB_C(val) bfin_write_PORTGIO_MASKB_CLEAR(val) -#define bfin_read_FIO_MASKB_S() bfin_read_PORTGIO_MASKB_SET() -#define bfin_write_FIO_MASKB_S(val) bfin_write_PORTGIO_MASKB_SET(val) -#define bfin_read_FIO_MASKB_T() bfin_read_PORTGIO_MASKB_TOGGLE() -#define bfin_write_FIO_MASKB_T(val) bfin_write_PORTGIO_MASKB_TOGGLE(val) -#define bfin_read_FIO_DIR() bfin_read_PORTGIO_DIR() -#define bfin_write_FIO_DIR(val) bfin_write_PORTGIO_DIR(val) -#define bfin_read_FIO_POLAR() bfin_read_PORTGIO_POLAR() -#define bfin_write_FIO_POLAR(val) bfin_write_PORTGIO_POLAR(val) -#define bfin_read_FIO_EDGE() bfin_read_PORTGIO_EDGE() -#define bfin_write_FIO_EDGE(val) bfin_write_PORTGIO_EDGE(val) -#define bfin_read_FIO_BOTH() bfin_read_PORTGIO_BOTH() -#define bfin_write_FIO_BOTH(val) bfin_write_PORTGIO_BOTH(val) -#define bfin_read_FIO_INEN() bfin_read_PORTGIO_INEN() -#define bfin_write_FIO_INEN(val) bfin_write_PORTGIO_INEN(val) - -#define bfin_read_FIO_FLAG_D() bfin_read_PORTGIO() -#define bfin_write_FIO_FLAG_D(val) bfin_write_PORTGIO(val) -#define FIO_FLAG_D PORTGIO -#define bfin_read_FIO_FLAG_C() bfin_read_PORTGIO_CLEAR() -#define bfin_write_FIO_FLAG_C(val) bfin_write_PORTGIO_CLEAR(val) -#define FIO_FLAG_C PORTGIO_CLEAR -#define bfin_read_FIO_FLAG_S() bfin_read_PORTGIO_SET() -#define bfin_write_FIO_FLAG_S(val) bfin_write_PORTGIO_SET(val) -#define FIO_FLAG_S PORTGIO_SET -#define bfin_read_FIO_FLAG_T() bfin_read_PORTGIO_TOGGLE() -#define bfin_write_FIO_FLAG_T(val) bfin_write_PORTGIO_TOGGLE(val) -#define FIO_FLAG_T PORTGIO_TOGGLE -#define bfin_read_FIO_MASKA_D() bfin_read_PORTGIO_MASKA() -#define bfin_write_FIO_MASKA_D(val) bfin_write_PORTGIO_MASKA(val) -#define FIO_MASKA_D PORTGIO_MASKA -#define bfin_read_FIO_MASKA_C() bfin_read_PORTGIO_MASKA_CLEAR() -#define bfin_write_FIO_MASKA_C(val) bfin_write_PORTGIO_MASKA_CLEAR(val) -#define FIO_MASKA_C PORTGIO_MASKA_CLEAR -#define bfin_read_FIO_MASKA_S() bfin_read_PORTGIO_MASKA_SET() -#define bfin_write_FIO_MASKA_S(val) bfin_write_PORTGIO_MASKA_SET(val) -#define FIO_MASKA_S PORTGIO_MASKA_SET -#define bfin_read_FIO_MASKA_T() bfin_read_PORTGIO_MASKA_TOGGLE() -#define bfin_write_FIO_MASKA_T(val) bfin_write_PORTGIO_MASKA_TOGGLE(val) -#define FIO_MASKA_T PORTGIO_MASKA_TOGGLE -#define bfin_read_FIO_MASKB_D() bfin_read_PORTGIO_MASKB() -#define bfin_write_FIO_MASKB_D(val) bfin_write_PORTGIO_MASKB(val) -#define FIO_MASKB_D PORTGIO_MASKB -#define bfin_read_FIO_MASKB_C() bfin_read_PORTGIO_MASKB_CLEAR() -#define bfin_write_FIO_MASKB_C(val) bfin_write_PORTGIO_MASKB_CLEAR(val) -#define FIO_MASKB_C PORTGIO_MASKB_CLEAR -#define bfin_read_FIO_MASKB_S() bfin_read_PORTGIO_MASKB_SET() -#define bfin_write_FIO_MASKB_S(val) bfin_write_PORTGIO_MASKB_SET(val) -#define FIO_MASKB_S PORTGIO_MASKB_SET -#define bfin_read_FIO_MASKB_T() bfin_read_PORTGIO_MASKB_TOGGLE() -#define bfin_write_FIO_MASKB_T(val) bfin_write_PORTGIO_MASKB_TOGGLE(val) -#define FIO_MASKB_T PORTGIO_MASKB_TOGGLE -#define bfin_read_FIO_DIR() bfin_read_PORTGIO_DIR() -#define bfin_write_FIO_DIR(val) bfin_write_PORTGIO_DIR(val) -#define FIO_DIR PORTGIO_DIR -#define bfin_read_FIO_POLAR() bfin_read_PORTGIO_POLAR() -#define bfin_write_FIO_POLAR(val) bfin_write_PORTGIO_POLAR(val) -#define FIO_POLAR PORTGIO_POLAR -#define bfin_read_FIO_EDGE() bfin_read_PORTGIO_EDGE() -#define bfin_write_FIO_EDGE(val) bfin_write_PORTGIO_EDGE(val) -#define FIO_EDGE PORTGIO_EDGE -#define bfin_read_FIO_BOTH() bfin_read_PORTGIO_BOTH() -#define bfin_write_FIO_BOTH(val) bfin_write_PORTGIO_BOTH(val) -#define FIO_BOTH PORTGIO_BOTH -#define bfin_read_FIO_INEN() bfin_read_PORTGIO_INEN() -#define bfin_write_FIO_INEN(val) bfin_write_PORTGIO_INEN(val) -#define FIO_INEN PORTGIO_INEN - -#endif - -/* FIO USE PORT H*/ -#ifdef CONFIG_BF537_PORT_H -#define bfin_read_PORT_FER() bfin_read_PORTH_FER() -#define bfin_write_PORT_FER(val) bfin_write_PORTH_FER(val) -#define bfin_read_FIO_FLAG_D() bfin_read_PORTHIO() -#define bfin_write_FIO_FLAG_D(val) bfin_write_PORTHIO(val) -#define bfin_read_FIO_FLAG_C() bfin_read_PORTHIO_CLEAR() -#define bfin_write_FIO_FLAG_C(val) bfin_write_PORTHIO_CLEAR(val) -#define bfin_read_FIO_FLAG_S() bfin_read_PORTHIO_SET() -#define bfin_write_FIO_FLAG_S(val) bfin_write_PORTHIO_SET(val) -#define bfin_read_FIO_FLAG_T() bfin_read_PORTHIO_TOGGLE() -#define bfin_write_FIO_FLAG_T(val) bfin_write_PORTHIO_TOGGLE(val) -#define bfin_read_FIO_MASKA_D() bfin_read_PORTHIO_MASKA() -#define bfin_write_FIO_MASKA_D(val) bfin_write_PORTHIO_MASKA(val) -#define bfin_read_FIO_MASKA_C() bfin_read_PORTHIO_MASKA_CLEAR() -#define bfin_write_FIO_MASKA_C(val) bfin_write_PORTHIO_MASKA_CLEAR(val) -#define bfin_read_FIO_MASKA_S() bfin_read_PORTHIO_MASKA_SET() -#define bfin_write_FIO_MASKA_S(val) bfin_write_PORTHIO_MASKA_SET(val) -#define bfin_read_FIO_MASKA_T() bfin_read_PORTHIO_MASKA_TOGGLE() -#define bfin_write_FIO_MASKA_T(val) bfin_write_PORTHIO_MASKA_TOGGLE(val) -#define bfin_read_FIO_MASKB_D() bfin_read_PORTHIO_MASKB() -#define bfin_write_FIO_MASKB_D(val) bfin_write_PORTHIO_MASKB(val) -#define bfin_read_FIO_MASKB_C() bfin_read_PORTHIO_MASKB_CLEAR() -#define bfin_write_FIO_MASKB_C(val) bfin_write_PORTHIO_MASKB_CLEAR(val) -#define bfin_read_FIO_MASKB_S() bfin_read_PORTHIO_MASKB_SET() -#define bfin_write_FIO_MASKB_S(val) bfin_write_PORTHIO_MASKB_SET(val) -#define bfin_read_FIO_MASKB_T() bfin_read_PORTHIO_MASKB_TOGGLE() -#define bfin_write_FIO_MASKB_T(val) bfin_write_PORTHIO_MASKB_TOGGLE(val) -#define bfin_read_FIO_DIR() bfin_read_PORTHIO_DIR() -#define bfin_write_FIO_DIR(val) bfin_write_PORTHIO_DIR(val) -#define bfin_read_FIO_POLAR() bfin_read_PORTHIO_POLAR() -#define bfin_write_FIO_POLAR(val) bfin_write_PORTHIO_POLAR(val) -#define bfin_read_FIO_EDGE() bfin_read_PORTHIO_EDGE() -#define bfin_write_FIO_EDGE(val) bfin_write_PORTHIO_EDGE(val) -#define bfin_read_FIO_BOTH() bfin_read_PORTHIO_BOTH() -#define bfin_write_FIO_BOTH(val) bfin_write_PORTHIO_BOTH(val) -#define bfin_read_FIO_INEN() bfin_read_PORTHIO_INEN() -#define bfin_write_FIO_INEN(val) bfin_write_PORTHIO_INEN(val) - -#define bfin_read_FIO_FLAG_D() bfin_read_PORTHIO() -#define bfin_write_FIO_FLAG_D(val) bfin_write_PORTHIO(val) -#define FIO_FLAG_D PORTHIO -#define bfin_read_FIO_FLAG_C() bfin_read_PORTHIO_CLEAR() -#define bfin_write_FIO_FLAG_C(val) bfin_write_PORTHIO_CLEAR(val) -#define FIO_FLAG_C PORTHIO_CLEAR -#define bfin_read_FIO_FLAG_S() bfin_read_PORTHIO_SET() -#define bfin_write_FIO_FLAG_S(val) bfin_write_PORTHIO_SET(val) -#define FIO_FLAG_S PORTHIO_SET -#define bfin_read_FIO_FLAG_T() bfin_read_PORTHIO_TOGGLE() -#define bfin_write_FIO_FLAG_T(val) bfin_write_PORTHIO_TOGGLE(val) -#define FIO_FLAG_T PORTHIO_TOGGLE -#define bfin_read_FIO_MASKA_D() bfin_read_PORTHIO_MASKA() -#define bfin_write_FIO_MASKA_D(val) bfin_write_PORTHIO_MASKA(val) -#define FIO_MASKA_D PORTHIO_MASKA -#define bfin_read_FIO_MASKA_C() bfin_read_PORTHIO_MASKA_CLEAR() -#define bfin_write_FIO_MASKA_C(val) bfin_write_PORTHIO_MASKA_CLEAR(val) -#define FIO_MASKA_C PORTHIO_MASKA_CLEAR -#define bfin_read_FIO_MASKA_S() bfin_read_PORTHIO_MASKA_SET() -#define bfin_write_FIO_MASKA_S(val) bfin_write_PORTHIO_MASKA_SET(val) -#define FIO_MASKA_S PORTHIO_MASKA_SET -#define bfin_read_FIO_MASKA_T() bfin_read_PORTHIO_MASKA_TOGGLE() -#define bfin_write_FIO_MASKA_T(val) bfin_write_PORTHIO_MASKA_TOGGLE(val) -#define FIO_MASKA_T PORTHIO_MASKA_TOGGLE -#define bfin_read_FIO_MASKB_D() bfin_read_PORTHIO_MASKB() -#define bfin_write_FIO_MASKB_D(val) bfin_write_PORTHIO_MASKB(val) -#define FIO_MASKB_D PORTHIO_MASKB -#define bfin_read_FIO_MASKB_C() bfin_read_PORTHIO_MASKB_CLEAR() -#define bfin_write_FIO_MASKB_C(val) bfin_write_PORTHIO_MASKB_CLEAR(val) -#define FIO_MASKB_C PORTHIO_MASKB_CLEAR -#define bfin_read_FIO_MASKB_S() bfin_read_PORTHIO_MASKB_SET() -#define bfin_write_FIO_MASKB_S(val) bfin_write_PORTHIO_MASKB_SET(val) -#define FIO_MASKB_S PORTHIO_MASKB_SET -#define bfin_read_FIO_MASKB_T() bfin_read_PORTHIO_MASKB_TOGGLE() -#define bfin_write_FIO_MASKB_T(val) bfin_write_PORTHIO_MASKB_TOGGLE(val) -#define FIO_MASKB_T PORTHIO_MASKB_TOGGLE -#define bfin_read_FIO_DIR() bfin_read_PORTHIO_DIR() -#define bfin_write_FIO_DIR(val) bfin_write_PORTHIO_DIR(val) -#define FIO_DIR PORTHIO_DIR -#define bfin_read_FIO_POLAR() bfin_read_PORTHIO_POLAR() -#define bfin_write_FIO_POLAR(val) bfin_write_PORTHIO_POLAR(val) -#define FIO_POLAR PORTHIO_POLAR -#define bfin_read_FIO_EDGE() bfin_read_PORTHIO_EDGE() -#define bfin_write_FIO_EDGE(val) bfin_write_PORTHIO_EDGE(val) -#define FIO_EDGE PORTHIO_EDGE -#define bfin_read_FIO_BOTH() bfin_read_PORTHIO_BOTH() -#define bfin_write_FIO_BOTH(val) bfin_write_PORTHIO_BOTH(val) -#define FIO_BOTH PORTHIO_BOTH -#define bfin_read_FIO_INEN() bfin_read_PORTHIO_INEN() -#define bfin_write_FIO_INEN(val) bfin_write_PORTHIO_INEN(val) -#define FIO_INEN PORTHIO_INEN - -#endif - /* PLL_DIV Masks */ #define CCLK_DIV1 CSEL_DIV1 /* CCLK = VCO / 1 */ #define CCLK_DIV2 CSEL_DIV2 /* CCLK = VCO / 2 */ -- cgit v1.2.3-70-g09d2 From 2714d9a6d1e68d30f5be8871722a7cff388c2d74 Mon Sep 17 00:00:00 2001 From: Michael Hennerich Date: Thu, 11 Oct 2007 00:29:49 +0800 Subject: Blackfin arch: Workaround reboot bug, issue SSYNC at the start of bfin_reset reboot failes on BF533 http://blackfin.uclinux.org/gf/project/uclinux-dist/tracker/?action=TrackerItemEdit&tracker_item_id=3500 Signed-off-by: Michael Hennerich Signed-off-by: Bryan Wu --- arch/blackfin/kernel/reboot.c | 78 +++++++++++++++++++++++++++++++++++++++++++ include/asm-blackfin/reboot.h | 20 +++++++++++ 2 files changed, 98 insertions(+) create mode 100644 arch/blackfin/kernel/reboot.c create mode 100644 include/asm-blackfin/reboot.h (limited to 'arch') diff --git a/arch/blackfin/kernel/reboot.c b/arch/blackfin/kernel/reboot.c new file mode 100644 index 00000000000..356078ec462 --- /dev/null +++ b/arch/blackfin/kernel/reboot.c @@ -0,0 +1,78 @@ +/* + * arch/blackfin/kernel/reboot.c - handle shutdown/reboot + * + * Copyright 2004-2007 Analog Devices Inc. + * + * Licensed under the GPL-2 or later. + */ + +#include +#include +#include +#include + +#if defined(BF537_FAMILY) || defined(BF533_FAMILY) +#define SYSCR_VAL 0x0 +#elif defined(BF561_FAMILY) +#define SYSCR_VAL 0x20 +#elif defined(BF548_FAMILY) +#define SYSCR_VAL 0x10 +#endif + +/* A system soft reset makes external memory unusable + * so force this function into L1. + */ +__attribute__((l1_text)) +void bfin_reset(void) +{ + /* force BMODE and disable Core B (as needed) */ + bfin_write_SYSCR(SYSCR_VAL); + + /* we use asm ssync here because it's save and we save some L1 */ + asm("ssync;"); + + while (1) { + /* initiate system soft reset with magic 0x7 */ + bfin_write_SWRST(0x7); + asm("ssync;"); + /* clear system soft reset */ + bfin_write_SWRST(0); + asm("ssync;"); + /* issue core reset */ + asm("raise 1"); + } +} + +__attribute__((weak)) +void native_machine_restart(char *cmd) +{ +} + +void machine_restart(char *cmd) +{ + native_machine_restart(cmd); + local_irq_disable(); + bfin_reset(); +} + +__attribute__((weak)) +void native_machine_halt(void) +{ + idle_with_irq_disabled(); +} + +void machine_halt(void) +{ + native_machine_halt(); +} + +__attribute__((weak)) +void native_machine_power_off(void) +{ + idle_with_irq_disabled(); +} + +void machine_power_off(void) +{ + native_machine_power_off(); +} diff --git a/include/asm-blackfin/reboot.h b/include/asm-blackfin/reboot.h new file mode 100644 index 00000000000..6d448b5f598 --- /dev/null +++ b/include/asm-blackfin/reboot.h @@ -0,0 +1,20 @@ +/* + * include/asm-blackfin/reboot.h - shutdown/reboot header + * + * Copyright 2004-2007 Analog Devices Inc. + * + * Licensed under the GPL-2 or later. + */ + +#ifndef __ASM_REBOOT_H__ +#define __ASM_REBOOT_H__ + +/* optional board specific hooks */ +extern void native_machine_restart(char *cmd); +extern void native_machine_halt(void); +extern void native_machine_power_off(void); + +/* common reboot workarounds */ +extern void bfin_gpio_reset_spi0_ssel1(void); + +#endif -- cgit v1.2.3-70-g09d2 From b5c0e2e8068ca31eb2547f2e2e677516ce9d8800 Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Wed, 12 Sep 2007 17:31:59 +0800 Subject: Blackfin arch: fix typo pointed out by David Rowe (Mhz -> MHz) Signed-off-by: Mike Frysinger Signed-off-by: Bryan Wu --- arch/blackfin/kernel/setup.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/blackfin/kernel/setup.c b/arch/blackfin/kernel/setup.c index dfc464d8048..abf34a8dd07 100644 --- a/arch/blackfin/kernel/setup.c +++ b/arch/blackfin/kernel/setup.c @@ -332,7 +332,7 @@ void __init setup_arch(char **cmdline_p) CPU, bfin_revid()); printk(KERN_INFO "Blackfin Linux support by http://blackfin.uclinux.org/\n"); - printk(KERN_INFO "Processor Speed: %lu MHz core clock and %lu Mhz System Clock\n", + printk(KERN_INFO "Processor Speed: %lu MHz core clock and %lu MHz System Clock\n", cclk / 1000000, sclk / 1000000); if (ANOMALY_05000273 && (cclk >> 1) <= sclk) -- cgit v1.2.3-70-g09d2 From fb282a72f13305a74fb105bce1ee232b3492b654 Mon Sep 17 00:00:00 2001 From: Bryan Wu Date: Wed, 12 Sep 2007 17:48:25 +0800 Subject: Blackfin arch: cleanup IO and DMA_IO API function definitions according to other arches Signed-off-by: Bryan Wu --- arch/blackfin/kernel/bfin_dma_5xx.c | 6 +++--- include/asm-blackfin/io.h | 12 ++++++------ 2 files changed, 9 insertions(+), 9 deletions(-) (limited to 'arch') diff --git a/arch/blackfin/kernel/bfin_dma_5xx.c b/arch/blackfin/kernel/bfin_dma_5xx.c index f0db6c5c8d1..858cca6a2af 100644 --- a/arch/blackfin/kernel/bfin_dma_5xx.c +++ b/arch/blackfin/kernel/bfin_dma_5xx.c @@ -583,7 +583,7 @@ void *safe_dma_memcpy(void *dest, const void *src, size_t size) } EXPORT_SYMBOL(safe_dma_memcpy); -void dma_outsb(void __iomem *addr, const void *buf, unsigned short len) +void dma_outsb(const void __iomem *addr, const void *buf, unsigned short len) { unsigned long flags; @@ -647,7 +647,7 @@ void dma_insb(const void __iomem *addr, void *buf, unsigned short len) } EXPORT_SYMBOL(dma_insb); -void dma_outsw(void __iomem *addr, const void *buf, unsigned short len) +void dma_outsw(const void __iomem *addr, const void *buf, unsigned short len) { unsigned long flags; @@ -711,7 +711,7 @@ void dma_insw(const void __iomem *addr, void *buf, unsigned short len) } EXPORT_SYMBOL(dma_insw); -void dma_outsl(void __iomem *addr, const void *buf, unsigned short len) +void dma_outsl(const void __iomem *addr, const void *buf, unsigned short len) { unsigned long flags; diff --git a/include/asm-blackfin/io.h b/include/asm-blackfin/io.h index 142cb333db2..3f48f8feb5c 100644 --- a/include/asm-blackfin/io.h +++ b/include/asm-blackfin/io.h @@ -115,17 +115,17 @@ static inline unsigned int readl(const volatile void __iomem *addr) #ifndef __ASSEMBLY__ -extern void outsb(void __iomem *port, const void *addr, unsigned short count); -extern void outsw(void __iomem *port, const void *addr, unsigned short count); -extern void outsl(void __iomem *port, const void *addr, unsigned short count); +extern void outsb(const void __iomem *port, const void *addr, unsigned short count); +extern void outsw(const void __iomem *port, const void *addr, unsigned short count); +extern void outsl(const void __iomem *port, const void *addr, unsigned short count); extern void insb(const void __iomem *port, void *addr, unsigned short count); extern void insw(const void __iomem *port, void *addr, unsigned short count); extern void insl(const void __iomem *port, void *addr, unsigned short count); -extern void dma_outsb(void __iomem *port, const void *addr, unsigned short count); -extern void dma_outsw(void __iomem *port, const void *addr, unsigned short count); -extern void dma_outsl(void __iomem *port, const void *addr, unsigned short count); +extern void dma_outsb(const void __iomem *port, const void *addr, unsigned short count); +extern void dma_outsw(const void __iomem *port, const void *addr, unsigned short count); +extern void dma_outsl(const void __iomem *port, const void *addr, unsigned short count); extern void dma_insb(const void __iomem *port, void *addr, unsigned short count); extern void dma_insw(const void __iomem *port, void *addr, unsigned short count); -- cgit v1.2.3-70-g09d2 From c11b5776bfef671cd6eea4479f345ec042638643 Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Thu, 11 Oct 2007 00:12:41 +0800 Subject: Blackfin arch: add more common defines for output sections Signed-off-by: Mike Frysinger Signed-off-by: Bryan Wu --- arch/blackfin/kernel/vmlinux.lds.S | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'arch') diff --git a/arch/blackfin/kernel/vmlinux.lds.S b/arch/blackfin/kernel/vmlinux.lds.S index cd1cea05f1a..eec43674a46 100644 --- a/arch/blackfin/kernel/vmlinux.lds.S +++ b/arch/blackfin/kernel/vmlinux.lds.S @@ -185,6 +185,12 @@ SECTIONS __end = .; } + STABS_DEBUG + + DWARF_DEBUG + + NOTES + /DISCARD/ : { *(.exit.text) -- cgit v1.2.3-70-g09d2 From b7b2d344e7f7027497547a8b786a407047ee5e26 Mon Sep 17 00:00:00 2001 From: Bryan Wu Date: Tue, 9 Oct 2007 15:09:49 +0800 Subject: Blackfin arch: modify the insX/outsX and dma_insX/dma_outsX to be compatible with other archs Signed-off-by: Bryan Wu --- arch/blackfin/kernel/bfin_dma_5xx.c | 12 ++++++------ include/asm-blackfin/io.h | 24 ++++++++++++------------ 2 files changed, 18 insertions(+), 18 deletions(-) (limited to 'arch') diff --git a/arch/blackfin/kernel/bfin_dma_5xx.c b/arch/blackfin/kernel/bfin_dma_5xx.c index 858cca6a2af..17edd659995 100644 --- a/arch/blackfin/kernel/bfin_dma_5xx.c +++ b/arch/blackfin/kernel/bfin_dma_5xx.c @@ -583,7 +583,7 @@ void *safe_dma_memcpy(void *dest, const void *src, size_t size) } EXPORT_SYMBOL(safe_dma_memcpy); -void dma_outsb(const void __iomem *addr, const void *buf, unsigned short len) +void dma_outsb(unsigned long addr, const void *buf, unsigned short len) { unsigned long flags; @@ -616,7 +616,7 @@ void dma_outsb(const void __iomem *addr, const void *buf, unsigned short len) EXPORT_SYMBOL(dma_outsb); -void dma_insb(const void __iomem *addr, void *buf, unsigned short len) +void dma_insb(unsigned long addr, void *buf, unsigned short len) { unsigned long flags; @@ -647,7 +647,7 @@ void dma_insb(const void __iomem *addr, void *buf, unsigned short len) } EXPORT_SYMBOL(dma_insb); -void dma_outsw(const void __iomem *addr, const void *buf, unsigned short len) +void dma_outsw(unsigned long addr, const void *buf, unsigned short len) { unsigned long flags; @@ -679,7 +679,7 @@ void dma_outsw(const void __iomem *addr, const void *buf, unsigned short len) } EXPORT_SYMBOL(dma_outsw); -void dma_insw(const void __iomem *addr, void *buf, unsigned short len) +void dma_insw(unsigned long addr, void *buf, unsigned short len) { unsigned long flags; @@ -711,7 +711,7 @@ void dma_insw(const void __iomem *addr, void *buf, unsigned short len) } EXPORT_SYMBOL(dma_insw); -void dma_outsl(const void __iomem *addr, const void *buf, unsigned short len) +void dma_outsl(unsigned long addr, const void *buf, unsigned short len) { unsigned long flags; @@ -743,7 +743,7 @@ void dma_outsl(const void __iomem *addr, const void *buf, unsigned short len) } EXPORT_SYMBOL(dma_outsl); -void dma_insl(const void __iomem *addr, void *buf, unsigned short len) +void dma_insl(unsigned long addr, void *buf, unsigned short len) { unsigned long flags; diff --git a/include/asm-blackfin/io.h b/include/asm-blackfin/io.h index 3f48f8feb5c..525179bf43d 100644 --- a/include/asm-blackfin/io.h +++ b/include/asm-blackfin/io.h @@ -115,21 +115,21 @@ static inline unsigned int readl(const volatile void __iomem *addr) #ifndef __ASSEMBLY__ -extern void outsb(const void __iomem *port, const void *addr, unsigned short count); -extern void outsw(const void __iomem *port, const void *addr, unsigned short count); -extern void outsl(const void __iomem *port, const void *addr, unsigned short count); +extern void outsb(unsigned long port, const void *addr, unsigned long count); +extern void outsw(unsigned long port, const void *addr, unsigned long count); +extern void outsl(unsigned long port, const void *addr, unsigned long count); -extern void insb(const void __iomem *port, void *addr, unsigned short count); -extern void insw(const void __iomem *port, void *addr, unsigned short count); -extern void insl(const void __iomem *port, void *addr, unsigned short count); +extern void insb(unsigned long port, void *addr, unsigned long count); +extern void insw(unsigned long port, void *addr, unsigned long count); +extern void insl(unsigned long port, void *addr, unsigned long count); -extern void dma_outsb(const void __iomem *port, const void *addr, unsigned short count); -extern void dma_outsw(const void __iomem *port, const void *addr, unsigned short count); -extern void dma_outsl(const void __iomem *port, const void *addr, unsigned short count); +extern void dma_outsb(unsigned long port, const void *addr, unsigned short count); +extern void dma_outsw(unsigned long port, const void *addr, unsigned short count); +extern void dma_outsl(unsigned long port, const void *addr, unsigned short count); -extern void dma_insb(const void __iomem *port, void *addr, unsigned short count); -extern void dma_insw(const void __iomem *port, void *addr, unsigned short count); -extern void dma_insl(const void __iomem *port, void *addr, unsigned short count); +extern void dma_insb(unsigned long port, void *addr, unsigned short count); +extern void dma_insw(unsigned long port, void *addr, unsigned short count); +extern void dma_insl(unsigned long port, void *addr, unsigned short count); /* * Map some physical address range into the kernel address space. -- cgit v1.2.3-70-g09d2 From 0ae53640b54f2c30e52044f7102ba08915b988a7 Mon Sep 17 00:00:00 2001 From: Robin Getz Date: Tue, 9 Oct 2007 17:24:49 +0800 Subject: Blackfin arch: Initial patch to add earlyprintk support This allows debugging of problems which happen eary in the kernel boot process (after bootargs are parsed, but before serial subsystem is fully initialized) Signed-off-by: Robin Getz Signed-off-by: Bryan Wu --- Documentation/kernel-parameters.txt | 3 +- arch/blackfin/Kconfig | 14 ++++ arch/blackfin/kernel/Makefile | 1 + arch/blackfin/kernel/early_printk.c | 161 ++++++++++++++++++++++++++++++++++++ drivers/serial/bfin_5xx.c | 129 ++++++++++++++++++++++------- include/asm-blackfin/early_printk.h | 28 +++++++ 6 files changed, 307 insertions(+), 29 deletions(-) create mode 100644 arch/blackfin/kernel/early_printk.c create mode 100644 include/asm-blackfin/early_printk.h (limited to 'arch') diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index 4d175c75124..a57c1f216b2 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -35,6 +35,7 @@ parameter is applicable: APIC APIC support is enabled. APM Advanced Power Management support is enabled. AX25 Appropriate AX.25 support is enabled. + BLACKFIN Blackfin architecture is enabled. DRM Direct Rendering Management support is enabled. EDD BIOS Enhanced Disk Drive Services (EDD) is enabled EFI EFI Partitioning (GPT) is enabled @@ -550,7 +551,7 @@ and is between 256 and 4096 characters. It is defined in the file dtc3181e= [HW,SCSI] - earlyprintk= [X86-32,X86-64,SH] + earlyprintk= [X86-32,X86-64,SH,BLACKFIN] earlyprintk=vga earlyprintk=serial[,ttySn[,baudrate]] diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig index 26ebb0e8c43..cc789b988f3 100644 --- a/arch/blackfin/Kconfig +++ b/arch/blackfin/Kconfig @@ -1164,6 +1164,20 @@ config DEBUG_BFIN_NO_KERN_HWTRACE Say Y here to disable hardware tracing in some known "jumpy" pieces of code so that the trace buffer will extend further back. +config EARLY_PRINTK + bool "Early printk" + default n + help + This option enables special console drivers which allow the kernel + to print messages very early in the bootup process. + + This is useful for kernel debugging when your machine crashes very + early before the console code is initialized. After enabling this + feature, you must add "earlyprintk=serial,uart0,57600" to the + command line (bootargs). It is safe to say Y here in all cases, as + all of this lives in the init section and is thrown away after the + kernel boots completely. + config DUAL_CORE_TEST_MODULE tristate "Dual Core Test Module" depends on (BF561) diff --git a/arch/blackfin/kernel/Makefile b/arch/blackfin/kernel/Makefile index 243883ec6de..8aeb6066b19 100644 --- a/arch/blackfin/kernel/Makefile +++ b/arch/blackfin/kernel/Makefile @@ -13,3 +13,4 @@ obj-$(CONFIG_MODULES) += module.o obj-$(CONFIG_BFIN_DMA_5XX) += bfin_dma_5xx.o obj-$(CONFIG_DUAL_CORE_TEST_MODULE) += dualcore_test.o obj-$(CONFIG_KGDB) += kgdb.o +obj-$(CONFIG_EARLY_PRINTK) += early_printk.o diff --git a/arch/blackfin/kernel/early_printk.c b/arch/blackfin/kernel/early_printk.c new file mode 100644 index 00000000000..9bf61706694 --- /dev/null +++ b/arch/blackfin/kernel/early_printk.c @@ -0,0 +1,161 @@ +/* + * File: arch/blackfin/kernel/early_printk.c + * Based on: arch/x86_64/kernel/early_printk.c + * Author: Robin Getz +#include +#include +#include +#include +#include +#include +#include + +#ifdef CONFIG_SERIAL_BFIN +extern struct console *bfin_earlyserial_init(unsigned int port, + unsigned int cflag); +#endif + +static struct console *early_console; + +/* Default console + * Port n == ttyBFn + * cflags == UART output modes + */ +#define DEFAULT_PORT 0 +#define DEFAULT_CFLAG CS8|B57600 + +#ifdef CONFIG_SERIAL_CORE +/* What should get here is "0,57600" */ +static struct console * __init earlyserial_init(char *buf) +{ + int baud, bit; + char parity; + unsigned int serial_port = DEFAULT_PORT; + unsigned int cflag = DEFAULT_CFLAG; + + serial_port = simple_strtoul(buf, &buf, 10); + buf++; + + cflag = 0; + baud = simple_strtoul(buf, &buf, 10); + switch (baud) { + case 1200: + cflag |= B1200; + break; + case 2400: + cflag |= B2400; + break; + case 4800: + cflag |= B4800; + break; + case 9600: + cflag |= B9600; + break; + case 19200: + cflag |= B19200; + break; + case 38400: + cflag |= B38400; + break; + case 115200: + cflag |= B115200; + break; + default: + cflag |= B57600; + } + + parity = buf[0]; + buf++; + switch (parity) { + case 'e': + cflag |= PARENB; + break; + case 'o': + cflag |= PARODD; + break; + } + + bit = simple_strtoul(buf, &buf, 10); + switch (bit) { + case 5: + cflag |= CS5; + break; + case 6: + cflag |= CS5; + break; + case 7: + cflag |= CS5; + break; + default: + cflag |= CS8; + } + +#ifdef CONFIG_SERIAL_BFIN + return bfin_earlyserial_init(serial_port, cflag); +#else + return NULL; +#endif + +} +#endif + +int __init setup_early_printk(char *buf) +{ + + /* Crashing in here would be really bad, so check both the var + and the pointer before we start using it + */ + if (!buf) + return 0; + + if (!*buf) + return 0; + + if (early_console != NULL) + return 0; + +#ifdef CONFIG_SERIAL_BFIN + /* Check for Blackfin Serial */ + if (!strncmp(buf, "serial,uart", 11)) { + buf += 11; + early_console = earlyserial_init(buf); + } +#endif +#ifdef CONFIG_FB + /* TODO: add framebuffer console support */ +#endif + + if (likely(early_console)) { + early_console->flags |= CON_BOOT; + + register_console(early_console); + printk(KERN_INFO "early printk enabled on %s%d\n", + early_console->name, + early_console->index); + } + + return 0; +} + +early_param("earlyprintk", setup_early_printk); diff --git a/drivers/serial/bfin_5xx.c b/drivers/serial/bfin_5xx.c index 1e79ee605d9..5039e2675ab 100644 --- a/drivers/serial/bfin_5xx.c +++ b/drivers/serial/bfin_5xx.c @@ -962,30 +962,6 @@ static void __init bfin_serial_init_ports(void) } #ifdef CONFIG_SERIAL_BFIN_CONSOLE -static void bfin_serial_console_putchar(struct uart_port *port, int ch) -{ - struct bfin_serial_port *uart = (struct bfin_serial_port *)port; - while (!(UART_GET_LSR(uart) & THRE)) - barrier(); - UART_PUT_CHAR(uart, ch); - SSYNC(); -} - -/* - * Interrupts are disabled on entering - */ -static void -bfin_serial_console_write(struct console *co, const char *s, unsigned int count) -{ - struct bfin_serial_port *uart = &bfin_serial_ports[co->index]; - int flags = 0; - - spin_lock_irqsave(&uart->port.lock, flags); - uart_console_write(&uart->port, s, count, bfin_serial_console_putchar); - spin_unlock_irqrestore(&uart->port.lock, flags); - -} - /* * If the port was already initialised (eg, by a boot loader), * try to determine the current setup. @@ -1038,19 +1014,25 @@ bfin_serial_console_get_options(struct bfin_serial_port *uart, int *baud, } pr_debug("%s:baud = %d, parity = %c, bits= %d\n", __FUNCTION__, *baud, *parity, *bits); } +#endif + +#if defined(CONFIG_SERIAL_BFIN_CONSOLE) || defined(CONFIG_EARLY_PRINTK) +static struct uart_driver bfin_serial_reg; static int __init bfin_serial_console_setup(struct console *co, char *options) { struct bfin_serial_port *uart; +# ifdef CONFIG_SERIAL_BFIN_CONSOLE int baud = 57600; int bits = 8; int parity = 'n'; -#ifdef CONFIG_SERIAL_BFIN_CTSRTS +# ifdef CONFIG_SERIAL_BFIN_CTSRTS int flow = 'r'; -#else +# else int flow = 'n'; -#endif +# endif +# endif /* * Check whether an invalid uart number has been specified, and @@ -1061,15 +1043,45 @@ bfin_serial_console_setup(struct console *co, char *options) co->index = 0; uart = &bfin_serial_ports[co->index]; +# ifdef CONFIG_SERIAL_BFIN_CONSOLE if (options) uart_parse_options(options, &baud, &parity, &bits, &flow); else bfin_serial_console_get_options(uart, &baud, &parity, &bits); return uart_set_options(&uart->port, co, baud, parity, bits, flow); +# else + return 0; +# endif +} +#endif /* defined (CONFIG_SERIAL_BFIN_CONSOLE) || + defined (CONFIG_EARLY_PRINTK) */ + +#ifdef CONFIG_SERIAL_BFIN_CONSOLE +static void bfin_serial_console_putchar(struct uart_port *port, int ch) +{ + struct bfin_serial_port *uart = (struct bfin_serial_port *)port; + while (!(UART_GET_LSR(uart) & THRE)) + barrier(); + UART_PUT_CHAR(uart, ch); + SSYNC(); +} + +/* + * Interrupts are disabled on entering + */ +static void +bfin_serial_console_write(struct console *co, const char *s, unsigned int count) +{ + struct bfin_serial_port *uart = &bfin_serial_ports[co->index]; + int flags = 0; + + spin_lock_irqsave(&uart->port.lock, flags); + uart_console_write(&uart->port, s, count, bfin_serial_console_putchar); + spin_unlock_irqrestore(&uart->port.lock, flags); + } -static struct uart_driver bfin_serial_reg; static struct console bfin_serial_console = { .name = BFIN_SERIAL_NAME, .write = bfin_serial_console_write, @@ -1095,7 +1107,68 @@ console_initcall(bfin_serial_rs_console_init); #define BFIN_SERIAL_CONSOLE &bfin_serial_console #else #define BFIN_SERIAL_CONSOLE NULL +#endif /* CONFIG_SERIAL_BFIN_CONSOLE */ + + +#ifdef CONFIG_EARLY_PRINTK +static __init void early_serial_putc(struct uart_port *port, int ch) +{ + unsigned timeout = 0xffff; + struct bfin_serial_port *uart = (struct bfin_serial_port *)port; + + while ((!(UART_GET_LSR(uart) & THRE)) && --timeout) + cpu_relax(); + UART_PUT_CHAR(uart, ch); +} + +static __init void early_serial_write(struct console *con, const char *s, + unsigned int n) +{ + struct bfin_serial_port *uart = &bfin_serial_ports[con->index]; + unsigned int i; + + for (i = 0; i < n; i++, s++) { + if (*s == '\n') + early_serial_putc(&uart->port, '\r'); + early_serial_putc(&uart->port, *s); + } +} + +static struct __init console bfin_early_serial_console = { + .name = "early_BFuart", + .write = early_serial_write, + .device = uart_console_device, + .flags = CON_PRINTBUFFER, + .setup = bfin_serial_console_setup, + .index = -1, + .data = &bfin_serial_reg, +}; + +struct console __init *bfin_earlyserial_init(unsigned int port, + unsigned int cflag) +{ + struct bfin_serial_port *uart; + struct ktermios t; + + if (port == -1 || port >= nr_ports) + port = 0; + bfin_serial_init_ports(); + bfin_early_serial_console.index = port; +#ifdef CONFIG_KGDB_UART + kgdb_entry_state = 0; + init_kgdb_uart(); #endif + uart = &bfin_serial_ports[port]; + t.c_cflag = cflag; + t.c_iflag = 0; + t.c_oflag = 0; + t.c_lflag = ICANON; + t.c_line = port; + bfin_serial_set_termios(&uart->port, &t, &t); + return &bfin_early_serial_console; +} + +#endif /* CONFIG_SERIAL_BFIN_CONSOLE */ static struct uart_driver bfin_serial_reg = { .owner = THIS_MODULE, diff --git a/include/asm-blackfin/early_printk.h b/include/asm-blackfin/early_printk.h new file mode 100644 index 00000000000..110f1c1f845 --- /dev/null +++ b/include/asm-blackfin/early_printk.h @@ -0,0 +1,28 @@ +/* + * File: include/asm-blackfin/early_printk.h + * Author: Robin Getz Date: Tue, 9 Oct 2007 17:24:30 +0800 Subject: Blackfin arch: fix endless loop bug when a double fault happens Today when a double fault happens (exception during an exception handling event), we go into an endless loop, with nothing comming out the UART. With this patch, we actually see that we have commited a double fault event Signed-off-by: Robin Getz Signed-off-by: Bryan Wu --- arch/blackfin/kernel/traps.c | 8 +++++ arch/blackfin/mach-common/entry.S | 69 ++++++++++++++++++++++++++++++--------- 2 files changed, 62 insertions(+), 15 deletions(-) (limited to 'arch') diff --git a/arch/blackfin/kernel/traps.c b/arch/blackfin/kernel/traps.c index 1a8a5f171bc..ba68eb2ec92 100644 --- a/arch/blackfin/kernel/traps.c +++ b/arch/blackfin/kernel/traps.c @@ -132,6 +132,14 @@ static int printk_address(unsigned long address) } #endif +asmlinkage void double_fault_c(struct pt_regs *fp) +{ + printk(KERN_EMERG "\n" KERN_EMERG "Double Fault\n"); + dump_bfin_regs(fp, (void *)fp->retx); + panic("Double Fault - unrecoverable event\n"); + +} + asmlinkage void trap_c(struct pt_regs *fp) { #ifdef CONFIG_DEBUG_BFIN_HWTRACE_ON diff --git a/arch/blackfin/mach-common/entry.S b/arch/blackfin/mach-common/entry.S index 3feca05694f..e2239361cac 100644 --- a/arch/blackfin/mach-common/entry.S +++ b/arch/blackfin/mach-common/entry.S @@ -29,21 +29,7 @@ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ -/* - * 25-Dec-2004 - LG Soft India - * 1. Fix in return_from_int, to make sure any pending - * system call in ILAT for this process to get - * executed, otherwise in case context switch happens, - * system call of first process (i.e in ILAT) will be - * carried forward to the switched process. - * 2. Removed Constant references for the following - * a. IPEND - * b. EXCAUSE mask - * c. PAGE Mask - */ - -/* - * NOTE: This code handles signal-recognition, which happens every time +/* NOTE: This code handles signal-recognition, which happens every time * after a timer-interrupt and after each system call. */ @@ -175,6 +161,13 @@ ENTRY(_ex_replaceable) nop; ENTRY(_ex_trap_c) + /* Make sure we are not in a double fault */ + p4.l = lo(IPEND); + p4.h = hi(IPEND); + r7 = [p4]; + CC = BITTST (r7, 5); + if CC jump _double_fault; + /* Call C code (trap_c) to handle the exception, which most * likely involves sending a signal to the current process. * To avoid double faults, lower our priority to IRQ5 first. @@ -220,6 +213,52 @@ ENTRY(_ex_trap_c) rtx; ENDPROC(_ex_trap_c) +/* We just realized we got an exception, while we were processing a different + * exception. This is a unrecoverable event, so crash + */ +ENTRY(_double_fault) + /* Turn caches & protection off, to ensure we don't get any more + * double exceptions + */ + + P4.L = LO(IMEM_CONTROL); + P4.H = HI(IMEM_CONTROL); + + R5 = [P4]; /* Control Register*/ + BITCLR(R5,ENICPLB_P); + SSYNC; /* SSYNC required before writing to IMEM_CONTROL. */ + .align 8; + [P4] = R5; + SSYNC; + + P4.L = LO(DMEM_CONTROL); + P4.H = HI(DMEM_CONTROL); + R5 = [P4]; + BITCLR(R5,ENDCPLB_P); + SSYNC; /* SSYNC required before writing to DMEM_CONTROL. */ + .align 8; + [P4] = R5; + SSYNC; + + /* Fix up the stack */ + (R7:6,P5:4) = [sp++]; + ASTAT = [sp++]; + SP = EX_SCRATCH_REG; + + /* We should be out of the exception stack, and back down into + * kernel or user space stack + */ + SAVE_ALL_SYS + + r0 = sp; /* stack frame pt_regs pointer argument ==> r0 */ + SP += -12; + call _double_fault_c; + SP += 12; +.L_double_fault_panic: + JUMP .L_double_fault_panic + +ENDPROC(_double_fault) + ENTRY(_exception_to_level5) SAVE_ALL_SYS -- cgit v1.2.3-70-g09d2 From ce3afa1c043ab3d4125671441a57353d80f5f6f7 Mon Sep 17 00:00:00 2001 From: Robin Getz Date: Tue, 9 Oct 2007 17:28:36 +0800 Subject: Blackfin arch: Enable earlyprintk earlier - so any error after our interrupt tables are set up will print out Also ensure that the traps_c code doesn't cause a double fault, by sending a signal to a faulting kernel before the memory subsystem is fully initialized, by printing out the error message before sending the signal. Signed-off-by: Robin Getz Signed-off-by: Bryan Wu --- arch/blackfin/kernel/setup.c | 38 +++++++++++++++++++++----------------- arch/blackfin/kernel/traps.c | 8 ++++---- 2 files changed, 25 insertions(+), 21 deletions(-) (limited to 'arch') diff --git a/arch/blackfin/kernel/setup.c b/arch/blackfin/kernel/setup.c index abf34a8dd07..8dcd76e87ed 100644 --- a/arch/blackfin/kernel/setup.c +++ b/arch/blackfin/kernel/setup.c @@ -44,6 +44,7 @@ #include #include #include +#include u16 _bfin_swrst; @@ -157,8 +158,10 @@ static __init void parse_cmdline_early(char *cmdline_p) 1; } } + } else if (!memcmp(to, "earlyprintk=", 12)) { + to += 12; + setup_early_printk(to); } - } c = *(to++); if (!c) @@ -177,6 +180,23 @@ void __init setup_arch(char **cmdline_p) #ifdef CONFIG_DUMMY_CONSOLE conswitchp = &dummy_con; #endif + +#if defined(CONFIG_CMDLINE_BOOL) + strncpy(&command_line[0], CONFIG_CMDLINE, sizeof(command_line)); + command_line[sizeof(command_line) - 1] = 0; +#endif + + /* Keep a copy of command line */ + *cmdline_p = &command_line[0]; + memcpy(boot_command_line, command_line, COMMAND_LINE_SIZE); + boot_command_line[COMMAND_LINE_SIZE - 1] = '\0'; + + /* setup memory defaults from the user config */ + physical_mem_end = 0; + _ramend = CONFIG_MEM_SIZE * 1024 * 1024; + + parse_cmdline_early(&command_line[0]); + cclk = get_cclk(); sclk = get_sclk(); @@ -210,22 +230,6 @@ void __init setup_arch(char **cmdline_p) flash_probe(); #endif -#if defined(CONFIG_CMDLINE_BOOL) - strncpy(&command_line[0], CONFIG_CMDLINE, sizeof(command_line)); - command_line[sizeof(command_line) - 1] = 0; -#endif - - /* Keep a copy of command line */ - *cmdline_p = &command_line[0]; - memcpy(boot_command_line, command_line, COMMAND_LINE_SIZE); - boot_command_line[COMMAND_LINE_SIZE - 1] = '\0'; - - /* setup memory defaults from the user config */ - physical_mem_end = 0; - _ramend = CONFIG_MEM_SIZE * 1024 * 1024; - - parse_cmdline_early(&command_line[0]); - if (physical_mem_end == 0) physical_mem_end = _ramend; diff --git a/arch/blackfin/kernel/traps.c b/arch/blackfin/kernel/traps.c index ba68eb2ec92..8823e9ade58 100644 --- a/arch/blackfin/kernel/traps.c +++ b/arch/blackfin/kernel/traps.c @@ -402,10 +402,6 @@ asmlinkage void trap_c(struct pt_regs *fp) break; } - info.si_signo = sig; - info.si_errno = 0; - info.si_addr = (void *)fp->pc; - force_sig_info(sig, &info, current); if (sig != 0 && sig != SIGTRAP) { unsigned long stack; dump_bfin_regs(fp, (void *)fp->retx); @@ -414,6 +410,10 @@ asmlinkage void trap_c(struct pt_regs *fp) if (current->mm == NULL) panic("Kernel exception"); } + info.si_signo = sig; + info.si_errno = 0; + info.si_addr = (void *)fp->pc; + force_sig_info(sig, &info, current); /* if the address that we are about to return to is not valid, set it * to a valid address, if we have a current application or panic -- cgit v1.2.3-70-g09d2 From 337d390b3a9c1ce92a12bdb77b9ae6ded6273b12 Mon Sep 17 00:00:00 2001 From: Robin Getz Date: Tue, 9 Oct 2007 17:31:46 +0800 Subject: Blackfin arch: Print out debug info, as early as possible Print out debug info, as early as possible - even before the kernel initializes the interrupt vectors. Now we can print out debug messages almost anytime during the boot process. Signed-off-by: Robin Getz Signed-off-by: Bryan Wu --- arch/blackfin/kernel/early_printk.c | 61 ++++++++++++++++++++++++++++++++++--- arch/blackfin/mach-bf533/head.S | 6 ++++ arch/blackfin/mach-bf537/head.S | 6 ++++ arch/blackfin/mach-bf548/head.S | 6 ++++ arch/blackfin/mach-bf561/head.S | 6 ++++ arch/blackfin/mach-common/entry.S | 43 ++++++++++++++++++++++++-- include/asm-blackfin/irq_handler.h | 1 + 7 files changed, 123 insertions(+), 6 deletions(-) (limited to 'arch') diff --git a/arch/blackfin/kernel/early_printk.c b/arch/blackfin/kernel/early_printk.c index 9bf61706694..6ec518a8111 100644 --- a/arch/blackfin/kernel/early_printk.c +++ b/arch/blackfin/kernel/early_printk.c @@ -38,13 +38,13 @@ extern struct console *bfin_earlyserial_init(unsigned int port, static struct console *early_console; -/* Default console - * Port n == ttyBFn - * cflags == UART output modes - */ +/* Default console */ #define DEFAULT_PORT 0 #define DEFAULT_CFLAG CS8|B57600 +/* Default console for early crashes */ +#define DEFAULT_EARLY_PORT "serial,uart0,57600" + #ifdef CONFIG_SERIAL_CORE /* What should get here is "0,57600" */ static struct console * __init earlyserial_init(char *buf) @@ -158,4 +158,57 @@ int __init setup_early_printk(char *buf) return 0; } +/* + * Set up a temporary Event Vector Table, so if something bad happens before + * the kernel is fully started, it doesn't vector off into somewhere we don't + * know + */ + +asmlinkage void __init init_early_exception_vectors(void) +{ + SSYNC(); + + /* cannot program in software: + * evt0 - emulation (jtag) + * evt1 - reset + */ + bfin_write_EVT2(early_trap); + bfin_write_EVT3(early_trap); + bfin_write_EVT5(early_trap); + bfin_write_EVT6(early_trap); + bfin_write_EVT7(early_trap); + bfin_write_EVT8(early_trap); + bfin_write_EVT9(early_trap); + bfin_write_EVT10(early_trap); + bfin_write_EVT11(early_trap); + bfin_write_EVT12(early_trap); + bfin_write_EVT13(early_trap); + bfin_write_EVT14(early_trap); + bfin_write_EVT15(early_trap); + CSYNC(); + + /* Set all the return from interupt, exception, NMI to a known place + * so if we do a RETI, RETX or RETN by mistake - we go somewhere known + * Note - don't change RETS - we are in a subroutine, or + * RETE - since it might screw up if emulator is attached + */ + asm("\tRETI = %0; RETX = %0; RETN = %0;\n" + : : "p"(early_trap)); + +} + +asmlinkage void __init early_trap_c(struct pt_regs *fp, void *retaddr) +{ + /* This can happen before the uart is initialized, so initialize + * the UART now + */ + if (likely(early_console == NULL)) + setup_early_printk(DEFAULT_EARLY_PORT); + + dump_bfin_regs(fp, retaddr); + dump_bfin_trace_buffer(); + + panic("Died early"); +} + early_param("earlyprintk", setup_early_printk); diff --git a/arch/blackfin/mach-bf533/head.S b/arch/blackfin/mach-bf533/head.S index fa6dc0d8593..1ded945a6fa 100644 --- a/arch/blackfin/mach-bf533/head.S +++ b/arch/blackfin/mach-bf533/head.S @@ -181,6 +181,12 @@ ENTRY(__start) fp = sp; usp = sp; +#ifdef CONFIG_EARLY_PRINTK + SP += -12; + call _init_early_exception_vectors; + SP += 12; +#endif + /* Put The Code for PLL Programming and SDRAM Programming in L1 ISRAM */ call _bf53x_relocate_l1_mem; #if CONFIG_BFIN_KERNEL_CLOCK diff --git a/arch/blackfin/mach-bf537/head.S b/arch/blackfin/mach-bf537/head.S index 2c4ae466d4e..3014fe8dd15 100644 --- a/arch/blackfin/mach-bf537/head.S +++ b/arch/blackfin/mach-bf537/head.S @@ -224,6 +224,12 @@ ENTRY(__start) fp = sp; usp = sp; +#ifdef CONFIG_EARLY_PRINTK + SP += -12; + call _init_early_exception_vectors; + SP += 12; +#endif + /* Put The Code for PLL Programming and SDRAM Programming in L1 ISRAM */ call _bf53x_relocate_l1_mem; #if CONFIG_BFIN_KERNEL_CLOCK diff --git a/arch/blackfin/mach-bf548/head.S b/arch/blackfin/mach-bf548/head.S index 532ed0930b5..3071c243d42 100644 --- a/arch/blackfin/mach-bf548/head.S +++ b/arch/blackfin/mach-bf548/head.S @@ -125,6 +125,12 @@ ENTRY(__stext) FP = SP; USP = SP; +#ifdef CONFIG_EARLY_PRINTK + SP += -12; + call _init_early_exception_vectors; + SP += 12; +#endif + /* Put The Code for PLL Programming and SDRAM Programming in L1 ISRAM */ call _bf53x_relocate_l1_mem; #if CONFIG_BFIN_KERNEL_CLOCK diff --git a/arch/blackfin/mach-bf561/head.S b/arch/blackfin/mach-bf561/head.S index fd39891ae0f..96a3d456fb6 100644 --- a/arch/blackfin/mach-bf561/head.S +++ b/arch/blackfin/mach-bf561/head.S @@ -169,6 +169,12 @@ ENTRY(__start) fp = sp; usp = sp; +#ifdef CONFIG_EARLY_PRINTK + SP += -12; + call _init_early_exception_vectors; + SP += 12; +#endif + /* Put The Code for PLL Programming and SDRAM Programming in L1 ISRAM */ call _bf53x_relocate_l1_mem; #if CONFIG_BFIN_KERNEL_CLOCK diff --git a/arch/blackfin/mach-common/entry.S b/arch/blackfin/mach-common/entry.S index e2239361cac..a56b231d94c 100644 --- a/arch/blackfin/mach-common/entry.S +++ b/arch/blackfin/mach-common/entry.S @@ -835,12 +835,13 @@ ENTRY(_ex_trace_buff_full) P2 = [sp++]; P3 = [sp++]; jump _return_from_exception; +ENDPROC(_ex_trace_buff_full) #if CONFIG_DEBUG_BFIN_HWTRACE_EXPAND_LEN == 4 .data #else .section .l1.data.B -#endif +#endif /* CONFIG_DEBUG_BFIN_HWTRACE_EXPAND_LEN */ ENTRY(_trace_buff_offset) .long 0; ALIGN @@ -848,7 +849,45 @@ ENTRY(_software_trace_buff) .rept ((1 << CONFIG_DEBUG_BFIN_HWTRACE_EXPAND_LEN)*256); .long 0 .endr -#endif +#endif /* CONFIG_DEBUG_BFIN_HWTRACE_EXPAND */ + +#if CONFIG_EARLY_PRINTK +.section .init.text +ENTRY(_early_trap) + SAVE_ALL_SYS + trace_buffer_stop(p0,r0); + + /* Turn caches off, to ensure we don't get double exceptions */ + + P4.L = LO(IMEM_CONTROL); + P4.H = HI(IMEM_CONTROL); + + R5 = [P4]; /* Control Register*/ + BITCLR(R5,ENICPLB_P); + CLI R1; + SSYNC; /* SSYNC required before writing to IMEM_CONTROL. */ + .align 8; + [P4] = R5; + SSYNC; + + P4.L = LO(DMEM_CONTROL); + P4.H = HI(DMEM_CONTROL); + R5 = [P4]; + BITCLR(R5,ENDCPLB_P); + SSYNC; /* SSYNC required before writing to DMEM_CONTROL. */ + .align 8; + [P4] = R5; + SSYNC; + STI R1; + + r0 = sp; /* stack frame pt_regs pointer argument ==> r0 */ + r1 = RETX; + + SP += -12; + call _early_trap_c; + SP += 12; +ENDPROC(_early_trap) +#endif /* CONFIG_EARLY_PRINTK */ /* * Put these in the kernel data section - that should always be covered by diff --git a/include/asm-blackfin/irq_handler.h b/include/asm-blackfin/irq_handler.h index 19534c133c9..139b5208f9d 100644 --- a/include/asm-blackfin/irq_handler.h +++ b/include/asm-blackfin/irq_handler.h @@ -22,6 +22,7 @@ asmlinkage void evt_system_call(void); asmlinkage void init_exception_buff(void); asmlinkage void trap_c(struct pt_regs *fp); asmlinkage void ex_replaceable(void); +asmlinkage void early_trap(void); extern void *ex_table[]; extern void return_from_exception(void); -- cgit v1.2.3-70-g09d2 From 2b39331a282c3a03415653d4e188910a11c9db8a Mon Sep 17 00:00:00 2001 From: Michael Hennerich Date: Wed, 10 Oct 2007 16:58:49 +0800 Subject: Blackfin arch: Comply with revised Anomaly Workarounds for BF533 05000311 and BF561 05000323 Comply with revised Anomaly Workarounds for BF533 05000311 and BF561 05000323 accoring to BF533 anomaly sheet Rev. A 09/04/07 Signed-off-by: Michael Hennerich Signed-off-by: Bryan Wu --- arch/blackfin/kernel/bfin_gpio.c | 177 ++++++++++++++++++------------ include/asm-blackfin/mach-bf527/anomaly.h | 2 + include/asm-blackfin/mach-bf533/anomaly.h | 1 + include/asm-blackfin/mach-bf537/anomaly.h | 1 + include/asm-blackfin/mach-bf548/anomaly.h | 1 + 5 files changed, 112 insertions(+), 70 deletions(-) (limited to 'arch') diff --git a/arch/blackfin/kernel/bfin_gpio.c b/arch/blackfin/kernel/bfin_gpio.c index b58b0de3c90..3fe0cd49e8d 100644 --- a/arch/blackfin/kernel/bfin_gpio.c +++ b/arch/blackfin/kernel/bfin_gpio.c @@ -88,6 +88,36 @@ #include #include +#if ANOMALY_05000311 || ANOMALY_05000323 +enum { + AWA_data = SYSCR, + AWA_data_clear = SYSCR, + AWA_data_set = SYSCR, + AWA_toggle = SYSCR, + AWA_maska = UART_SCR, + AWA_maska_clear = UART_SCR, + AWA_maska_set = UART_SCR, + AWA_maska_toggle = UART_SCR, + AWA_maskb = UART_GCTL, + AWA_maskb_clear = UART_GCTL, + AWA_maskb_set = UART_GCTL, + AWA_maskb_toggle = UART_GCTL, + AWA_dir = SPORT1_STAT, + AWA_polar = SPORT1_STAT, + AWA_edge = SPORT1_STAT, + AWA_both = SPORT1_STAT, +#if ANOMALY_05000311 + AWA_inen = TIMER_ENABLE, +#elif ANOMALY_05000323 + AWA_inen = DMA1_1_CONFIG, +#endif +}; + /* Anomaly Workaround */ +#define AWA_DUMMY_READ(name) bfin_read16(AWA_ ## name) +#else +#define AWA_DUMMY_READ(...) do { } while (0) +#endif + #ifdef BF533_FAMILY static struct gpio_port_t *gpio_bankb[gpio_bank(MAX_BLACKFIN_GPIOS)] = { (struct gpio_port_t *) FIO_FLAG_D, @@ -332,10 +362,13 @@ inline u16 get_portmux(unsigned short portno) static void default_gpio(unsigned short gpio) { unsigned short bank, bitmask; + unsigned long flags; bank = gpio_bank(gpio); bitmask = gpio_bit(gpio); + local_irq_save(flags); + gpio_bankb[bank]->maska_clear = bitmask; gpio_bankb[bank]->maskb_clear = bitmask; SSYNC(); @@ -344,6 +377,9 @@ static void default_gpio(unsigned short gpio) gpio_bankb[bank]->polar &= ~bitmask; gpio_bankb[bank]->both &= ~bitmask; gpio_bankb[bank]->edge &= ~bitmask; + AWA_DUMMY_READ(edge); + local_irq_restore(flags); + } #else # define default_gpio(...) do { } while (0) @@ -396,6 +432,7 @@ void set_gpio_ ## name(unsigned short gpio, unsigned short arg) \ gpio_bankb[gpio_bank(gpio)]->name |= gpio_bit(gpio); \ else \ gpio_bankb[gpio_bank(gpio)]->name &= ~gpio_bit(gpio); \ + AWA_DUMMY_READ(name); \ local_irq_restore(flags); \ } \ EXPORT_SYMBOL(set_gpio_ ## name); @@ -407,6 +444,22 @@ SET_GPIO(edge) SET_GPIO(both) +#if ANOMALY_05000311 || ANOMALY_05000323 +#define SET_GPIO_SC(name) \ +void set_gpio_ ## name(unsigned short gpio, unsigned short arg) \ +{ \ + unsigned long flags; \ + BUG_ON(!(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio))); \ + local_irq_save(flags); \ + if (arg) \ + gpio_bankb[gpio_bank(gpio)]->name ## _set = gpio_bit(gpio); \ + else \ + gpio_bankb[gpio_bank(gpio)]->name ## _clear = gpio_bit(gpio); \ + AWA_DUMMY_READ(name); \ + local_irq_restore(flags); \ +} \ +EXPORT_SYMBOL(set_gpio_ ## name); +#else #define SET_GPIO_SC(name) \ void set_gpio_ ## name(unsigned short gpio, unsigned short arg) \ { \ @@ -417,37 +470,20 @@ void set_gpio_ ## name(unsigned short gpio, unsigned short arg) \ gpio_bankb[gpio_bank(gpio)]->name ## _clear = gpio_bit(gpio); \ } \ EXPORT_SYMBOL(set_gpio_ ## name); +#endif SET_GPIO_SC(maska) SET_GPIO_SC(maskb) - -#if ANOMALY_05000311 -void set_gpio_data(unsigned short gpio, unsigned short arg) -{ - unsigned long flags; - BUG_ON(!(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio))); - local_irq_save(flags); - if (arg) - gpio_bankb[gpio_bank(gpio)]->data_set = gpio_bit(gpio); - else - gpio_bankb[gpio_bank(gpio)]->data_clear = gpio_bit(gpio); - bfin_read_CHIPID(); - local_irq_restore(flags); -} -EXPORT_SYMBOL(set_gpio_data); -#else SET_GPIO_SC(data) -#endif - -#if ANOMALY_05000311 +#if ANOMALY_05000311 || ANOMALY_05000323 void set_gpio_toggle(unsigned short gpio) { unsigned long flags; BUG_ON(!(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio))); local_irq_save(flags); gpio_bankb[gpio_bank(gpio)]->toggle = gpio_bit(gpio); - bfin_read_CHIPID(); + AWA_DUMMY_READ(toggle); local_irq_restore(flags); } #else @@ -462,13 +498,27 @@ EXPORT_SYMBOL(set_gpio_toggle); /*Set current PORT date (16-bit word)*/ +#if ANOMALY_05000311 || ANOMALY_05000323 #define SET_GPIO_P(name) \ void set_gpiop_ ## name(unsigned short gpio, unsigned short arg) \ { \ + unsigned long flags; \ + local_irq_save(flags); \ gpio_bankb[gpio_bank(gpio)]->name = arg; \ + AWA_DUMMY_READ(name); \ + local_irq_restore(flags); \ } \ EXPORT_SYMBOL(set_gpiop_ ## name); +#else +#define SET_GPIO_P(name) \ +void set_gpiop_ ## name(unsigned short gpio, unsigned short arg) \ +{ \ + gpio_bankb[gpio_bank(gpio)]->name = arg; \ +} \ +EXPORT_SYMBOL(set_gpiop_ ## name); +#endif +SET_GPIO_P(data) SET_GPIO_P(dir) SET_GPIO_P(inen) SET_GPIO_P(polar) @@ -478,31 +528,30 @@ SET_GPIO_P(maska) SET_GPIO_P(maskb) -#if ANOMALY_05000311 -void set_gpiop_data(unsigned short gpio, unsigned short arg) -{ - unsigned long flags; - local_irq_save(flags); - gpio_bankb[gpio_bank(gpio)]->data = arg; - bfin_read_CHIPID(); - local_irq_restore(flags); -} -EXPORT_SYMBOL(set_gpiop_data); -#else -SET_GPIO_P(data) -#endif - - - /* Get a specific bit */ - +#if ANOMALY_05000311 || ANOMALY_05000323 +#define GET_GPIO(name) \ +unsigned short get_gpio_ ## name(unsigned short gpio) \ +{ \ + unsigned long flags; \ + unsigned short ret; \ + local_irq_save(flags); \ + ret = 0x01 & (gpio_bankb[gpio_bank(gpio)]->name >> gpio_sub_n(gpio)); \ + AWA_DUMMY_READ(name); \ + local_irq_restore(flags); \ + return ret; \ +} \ +EXPORT_SYMBOL(get_gpio_ ## name); +#else #define GET_GPIO(name) \ unsigned short get_gpio_ ## name(unsigned short gpio) \ { \ return (0x01 & (gpio_bankb[gpio_bank(gpio)]->name >> gpio_sub_n(gpio))); \ } \ EXPORT_SYMBOL(get_gpio_ ## name); +#endif +GET_GPIO(data) GET_GPIO(dir) GET_GPIO(inen) GET_GPIO(polar) @@ -511,33 +560,31 @@ GET_GPIO(both) GET_GPIO(maska) GET_GPIO(maskb) - -#if ANOMALY_05000311 -unsigned short get_gpio_data(unsigned short gpio) -{ - unsigned long flags; - unsigned short ret; - BUG_ON(!(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio))); - local_irq_save(flags); - ret = 0x01 & (gpio_bankb[gpio_bank(gpio)]->data >> gpio_sub_n(gpio)); - bfin_read_CHIPID(); - local_irq_restore(flags); - return ret; -} -EXPORT_SYMBOL(get_gpio_data); -#else -GET_GPIO(data) -#endif - /*Get current PORT date (16-bit word)*/ +#if ANOMALY_05000311 || ANOMALY_05000323 +#define GET_GPIO_P(name) \ +unsigned short get_gpiop_ ## name(unsigned short gpio) \ +{ \ + unsigned long flags; \ + unsigned short ret; \ + local_irq_save(flags); \ + ret = (gpio_bankb[gpio_bank(gpio)]->name); \ + AWA_DUMMY_READ(name); \ + local_irq_restore(flags); \ + return ret; \ +} \ +EXPORT_SYMBOL(get_gpiop_ ## name); +#else #define GET_GPIO_P(name) \ unsigned short get_gpiop_ ## name(unsigned short gpio) \ { \ return (gpio_bankb[gpio_bank(gpio)]->name);\ } \ EXPORT_SYMBOL(get_gpiop_ ## name); +#endif +GET_GPIO_P(data) GET_GPIO_P(dir) GET_GPIO_P(inen) GET_GPIO_P(polar) @@ -546,21 +593,6 @@ GET_GPIO_P(both) GET_GPIO_P(maska) GET_GPIO_P(maskb) -#if ANOMALY_05000311 -unsigned short get_gpiop_data(unsigned short gpio) -{ - unsigned long flags; - unsigned short ret; - local_irq_save(flags); - ret = gpio_bankb[gpio_bank(gpio)]->data; - bfin_read_CHIPID(); - local_irq_restore(flags); - return ret; -} -EXPORT_SYMBOL(get_gpiop_data); -#else -GET_GPIO_P(data) -#endif #ifdef CONFIG_PM /*********************************************************** @@ -684,6 +716,8 @@ u32 gpio_pm_setup(void) } } + AWA_DUMMY_READ(maskb_set); + if (sic_iwr) return sic_iwr; else @@ -715,6 +749,7 @@ void gpio_pm_restore(void) gpio_bankb[bank]->maskb = gpio_bank_saved[bank].maskb; } + AWA_DUMMY_READ(maskb); } #endif @@ -1089,6 +1124,7 @@ void gpio_direction_input(unsigned short gpio) local_irq_save(flags); gpio_bankb[gpio_bank(gpio)]->dir &= ~gpio_bit(gpio); gpio_bankb[gpio_bank(gpio)]->inen |= gpio_bit(gpio); + AWA_DUMMY_READ(inen); local_irq_restore(flags); } EXPORT_SYMBOL(gpio_direction_input); @@ -1102,6 +1138,7 @@ void gpio_direction_output(unsigned short gpio) local_irq_save(flags); gpio_bankb[gpio_bank(gpio)]->inen &= ~gpio_bit(gpio); gpio_bankb[gpio_bank(gpio)]->dir |= gpio_bit(gpio); + AWA_DUMMY_READ(dir); local_irq_restore(flags); } EXPORT_SYMBOL(gpio_direction_output); diff --git a/include/asm-blackfin/mach-bf527/anomaly.h b/include/asm-blackfin/mach-bf527/anomaly.h index 6112bc38282..991db986cd4 100644 --- a/include/asm-blackfin/mach-bf527/anomaly.h +++ b/include/asm-blackfin/mach-bf527/anomaly.h @@ -36,4 +36,6 @@ /* Boot ROM Kernel Incorrectly Alters Reset Value of USB Register */ #define ANOMALY_05000347 (1) +/* Anomalies that don't exist on this proc */ +#define ANOMALY_05000323 (0) #endif diff --git a/include/asm-blackfin/mach-bf533/anomaly.h b/include/asm-blackfin/mach-bf533/anomaly.h index caea0b0f832..f36ff5af1b9 100644 --- a/include/asm-blackfin/mach-bf533/anomaly.h +++ b/include/asm-blackfin/mach-bf533/anomaly.h @@ -254,5 +254,6 @@ /* Anomalies that don't exist on this proc */ #define ANOMALY_05000266 (0) +#define ANOMALY_05000323 (0) #endif diff --git a/include/asm-blackfin/mach-bf537/anomaly.h b/include/asm-blackfin/mach-bf537/anomaly.h index 71380ad29df..2b66ecf489f 100644 --- a/include/asm-blackfin/mach-bf537/anomaly.h +++ b/include/asm-blackfin/mach-bf537/anomaly.h @@ -139,5 +139,6 @@ #define ANOMALY_05000230 (0) #define ANOMALY_05000266 (0) #define ANOMALY_05000311 (0) +#define ANOMALY_05000323 (0) #endif diff --git a/include/asm-blackfin/mach-bf548/anomaly.h b/include/asm-blackfin/mach-bf548/anomaly.h index 0d12dbe5232..c5b63759cde 100644 --- a/include/asm-blackfin/mach-bf548/anomaly.h +++ b/include/asm-blackfin/mach-bf548/anomaly.h @@ -80,5 +80,6 @@ #define ANOMALY_05000266 (0) #define ANOMALY_05000273 (0) #define ANOMALY_05000311 (0) +#define ANOMALY_05000323 (0) #endif -- cgit v1.2.3-70-g09d2 From 1a7d91d651f25005c4f507aebf9eab17e508889c Mon Sep 17 00:00:00 2001 From: Michael Hennerich Date: Wed, 10 Oct 2007 17:42:55 +0800 Subject: Blackfin arch: flush/inv the correct range when using write back cache and fix bugs find by dmacopy - flush/inv the correct range - dmacopy test failed when policy is write_back - invalidate before dma http://blackfin.uclinux.org/gf/project/uclinux-dist/tracker/?action=TrackerItemEdit&tracker_item_id=3367 It's the cache invalidate what is causing the issue. There is no invalidate only instruction it's always: FLUSHINV So when we "invalidate" after the DMA we might (do) overwrite freshly dma'ed data by dirty Cache WB content. Fixed by moving the "invalidate" at the beginning of dma_memcpy. Signed-off-by: Michael Hennerich Signed-off-by: Bryan Wu --- arch/blackfin/kernel/bfin_dma_5xx.c | 39 ++++++++++++++++++++++++++++--------- 1 file changed, 30 insertions(+), 9 deletions(-) (limited to 'arch') diff --git a/arch/blackfin/kernel/bfin_dma_5xx.c b/arch/blackfin/kernel/bfin_dma_5xx.c index 17edd659995..e19164fb4cd 100644 --- a/arch/blackfin/kernel/bfin_dma_5xx.c +++ b/arch/blackfin/kernel/bfin_dma_5xx.c @@ -436,6 +436,10 @@ static void *__dma_memcpy(void *dest, const void *src, size_t size) blackfin_dcache_flush_range((unsigned int)src, (unsigned int)(src + size)); + if ((unsigned long)dest < memory_end) + blackfin_dcache_invalidate_range((unsigned int)dest, + (unsigned int)(dest + size)); + bfin_write_MDMA_D0_IRQ_STATUS(DMA_DONE | DMA_ERR); if ((unsigned long)src < (unsigned long)dest) @@ -543,6 +547,8 @@ static void *__dma_memcpy(void *dest, const void *src, size_t size) } } + SSYNC(); + while (!(bfin_read_MDMA_D0_IRQ_STATUS() & DMA_DONE)) ; @@ -552,9 +558,6 @@ static void *__dma_memcpy(void *dest, const void *src, size_t size) bfin_write_MDMA_S0_CONFIG(0); bfin_write_MDMA_D0_CONFIG(0); - if ((unsigned long)dest < memory_end) - blackfin_dcache_invalidate_range((unsigned int)dest, - (unsigned int)(dest + size)); local_irq_restore(flags); return dest; @@ -589,7 +592,8 @@ void dma_outsb(unsigned long addr, const void *buf, unsigned short len) local_irq_save(flags); - blackfin_dcache_flush_range((unsigned int)buf, (unsigned int)(buf) + len); + blackfin_dcache_flush_range((unsigned int)buf, + (unsigned int)(buf) + len); bfin_write_MDMA_D0_START_ADDR(addr); bfin_write_MDMA_D0_X_COUNT(len); @@ -604,6 +608,8 @@ void dma_outsb(unsigned long addr, const void *buf, unsigned short len) bfin_write_MDMA_S0_CONFIG(DMAEN | WDSIZE_8); bfin_write_MDMA_D0_CONFIG(WNR | DI_EN | DMAEN | WDSIZE_8); + SSYNC(); + while (!(bfin_read_MDMA_D0_IRQ_STATUS() & DMA_DONE)); bfin_write_MDMA_D0_IRQ_STATUS(DMA_DONE | DMA_ERR); @@ -620,6 +626,9 @@ void dma_insb(unsigned long addr, void *buf, unsigned short len) { unsigned long flags; + blackfin_dcache_invalidate_range((unsigned int)buf, + (unsigned int)(buf) + len); + local_irq_save(flags); bfin_write_MDMA_D0_START_ADDR(buf); bfin_write_MDMA_D0_X_COUNT(len); @@ -634,7 +643,7 @@ void dma_insb(unsigned long addr, void *buf, unsigned short len) bfin_write_MDMA_S0_CONFIG(DMAEN | WDSIZE_8); bfin_write_MDMA_D0_CONFIG(WNR | DI_EN | DMAEN | WDSIZE_8); - blackfin_dcache_invalidate_range((unsigned int)buf, (unsigned int)(buf) + len); + SSYNC(); while (!(bfin_read_MDMA_D0_IRQ_STATUS() & DMA_DONE)); @@ -653,7 +662,8 @@ void dma_outsw(unsigned long addr, const void *buf, unsigned short len) local_irq_save(flags); - blackfin_dcache_flush_range((unsigned int)buf, (unsigned int)(buf) + len); + blackfin_dcache_flush_range((unsigned int)buf, + (unsigned int)(buf) + len * sizeof(short)); bfin_write_MDMA_D0_START_ADDR(addr); bfin_write_MDMA_D0_X_COUNT(len); @@ -668,6 +678,8 @@ void dma_outsw(unsigned long addr, const void *buf, unsigned short len) bfin_write_MDMA_S0_CONFIG(DMAEN | WDSIZE_16); bfin_write_MDMA_D0_CONFIG(WNR | DI_EN | DMAEN | WDSIZE_16); + SSYNC(); + while (!(bfin_read_MDMA_D0_IRQ_STATUS() & DMA_DONE)); bfin_write_MDMA_D0_IRQ_STATUS(DMA_DONE | DMA_ERR); @@ -683,6 +695,9 @@ void dma_insw(unsigned long addr, void *buf, unsigned short len) { unsigned long flags; + blackfin_dcache_invalidate_range((unsigned int)buf, + (unsigned int)(buf) + len * sizeof(short)); + local_irq_save(flags); bfin_write_MDMA_D0_START_ADDR(buf); @@ -698,7 +713,7 @@ void dma_insw(unsigned long addr, void *buf, unsigned short len) bfin_write_MDMA_S0_CONFIG(DMAEN | WDSIZE_16); bfin_write_MDMA_D0_CONFIG(WNR | DI_EN | DMAEN | WDSIZE_16); - blackfin_dcache_invalidate_range((unsigned int)buf, (unsigned int)(buf) + len); + SSYNC(); while (!(bfin_read_MDMA_D0_IRQ_STATUS() & DMA_DONE)); @@ -717,7 +732,8 @@ void dma_outsl(unsigned long addr, const void *buf, unsigned short len) local_irq_save(flags); - blackfin_dcache_flush_range((unsigned int)buf, (unsigned int)(buf) + len); + blackfin_dcache_flush_range((unsigned int)buf, + (unsigned int)(buf) + len * sizeof(long)); bfin_write_MDMA_D0_START_ADDR(addr); bfin_write_MDMA_D0_X_COUNT(len); @@ -732,6 +748,8 @@ void dma_outsl(unsigned long addr, const void *buf, unsigned short len) bfin_write_MDMA_S0_CONFIG(DMAEN | WDSIZE_32); bfin_write_MDMA_D0_CONFIG(WNR | DI_EN | DMAEN | WDSIZE_32); + SSYNC(); + while (!(bfin_read_MDMA_D0_IRQ_STATUS() & DMA_DONE)); bfin_write_MDMA_D0_IRQ_STATUS(DMA_DONE | DMA_ERR); @@ -747,6 +765,9 @@ void dma_insl(unsigned long addr, void *buf, unsigned short len) { unsigned long flags; + blackfin_dcache_invalidate_range((unsigned int)buf, + (unsigned int)(buf) + len * sizeof(long)); + local_irq_save(flags); bfin_write_MDMA_D0_START_ADDR(buf); @@ -762,7 +783,7 @@ void dma_insl(unsigned long addr, void *buf, unsigned short len) bfin_write_MDMA_S0_CONFIG(DMAEN | WDSIZE_32); bfin_write_MDMA_D0_CONFIG(WNR | DI_EN | DMAEN | WDSIZE_32); - blackfin_dcache_invalidate_range((unsigned int)buf, (unsigned int)(buf) + len); + SSYNC(); while (!(bfin_read_MDMA_D0_IRQ_STATUS() & DMA_DONE)); -- cgit v1.2.3-70-g09d2 From b76f98761acc909c20c1e65c8af11dc1decae935 Mon Sep 17 00:00:00 2001 From: Robin Getz Date: Wed, 10 Oct 2007 17:25:15 +0800 Subject: Blackfin arch: show_mem can not be marked as init, since it is called during OOM condition show_mem can not be marked as init, since it is called during OOM condition from /mm/oom_kill.c:out_of_memory() and /mm/page_alloc.c:__alloc_pages() Signed-off-by: Robin Getz Signed-off-by: Bryan Wu --- arch/blackfin/mm/init.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/blackfin/mm/init.c b/arch/blackfin/mm/init.c index 68459cc052a..e97ea8fc8dc 100644 --- a/arch/blackfin/mm/init.c +++ b/arch/blackfin/mm/init.c @@ -53,7 +53,7 @@ static unsigned long empty_bad_page; unsigned long empty_zero_page; -void __init show_mem(void) +void show_mem(void) { unsigned long i; int free = 0, total = 0, reserved = 0, shared = 0; -- cgit v1.2.3-70-g09d2 From b3f8b9276314f4942ef9033aa5f4dc184901d640 Mon Sep 17 00:00:00 2001 From: Robin Getz Date: Wed, 10 Oct 2007 17:28:27 +0800 Subject: Blackfin arch: the load address is not safe to point to as a workaround for ANOMALY 05000281 Now that we have moved head.S into the init section, the load address is not safe to point to as a workaround for ANOMALY 05000281 Signed-off-by: Robin Getz Signed-off-by: Bryan Wu --- arch/blackfin/mach-common/entry.S | 17 +++++++++++++---- 1 file changed, 13 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/blackfin/mach-common/entry.S b/arch/blackfin/mach-common/entry.S index a56b231d94c..e3ad5802868 100644 --- a/arch/blackfin/mach-common/entry.S +++ b/arch/blackfin/mach-common/entry.S @@ -52,6 +52,15 @@ # define EX_SCRATCH_REG CYCLES #endif +#if ANOMALY_05000281 +ENTRY(_safe_speculative_execution) + NOP; + NOP; + NOP; + jump _safe_speculative_execution; +ENDPROC(_safe_speculative_execution) +#endif + #ifdef CONFIG_EXCPT_IRQ_SYSC_L1 .section .l1.text #else @@ -685,8 +694,8 @@ ENTRY(_return_from_int) [p0] = p1; csync; #if ANOMALY_05000281 - r0.l = lo(CONFIG_BOOT_LOAD); - r0.h = hi(CONFIG_BOOT_LOAD); + r0.l = _safe_speculative_execution; + r0.h = _safe_speculative_execution; reti = r0; #endif r0 = 0x801f (z); @@ -699,8 +708,8 @@ ENDPROC(_return_from_int) ENTRY(_lower_to_irq14) #if ANOMALY_05000281 - r0.l = lo(CONFIG_BOOT_LOAD); - r0.h = hi(CONFIG_BOOT_LOAD); + r0.l = _safe_speculative_execution; + r0.h = _safe_speculative_execution; reti = r0; #endif r0 = 0x401f; -- cgit v1.2.3-70-g09d2 From ef4a47db52cd8c15b5de07a318e5758d2f1e1bb9 Mon Sep 17 00:00:00 2001 From: Bernd Schmidt Date: Wed, 10 Oct 2007 17:45:22 +0800 Subject: Blackfin arch: Export strcpy - occasionally get module link failures otherwise Signed-off-by: Bernd Schmidt Signed-off-by: Bryan Wu --- arch/blackfin/kernel/bfin_ksyms.c | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/blackfin/kernel/bfin_ksyms.c b/arch/blackfin/kernel/bfin_ksyms.c index 70455949cfd..2198afe40f3 100644 --- a/arch/blackfin/kernel/bfin_ksyms.c +++ b/arch/blackfin/kernel/bfin_ksyms.c @@ -60,6 +60,7 @@ EXPORT_SYMBOL(csum_partial_copy); * their interface isn't gonna change any time soon now, so * it's OK to leave it out of version control. */ +EXPORT_SYMBOL(strcpy); EXPORT_SYMBOL(memcpy); EXPORT_SYMBOL(memset); EXPORT_SYMBOL(memcmp); -- cgit v1.2.3-70-g09d2 From bc41bb11654f7fbb8cae2d316a7c2ac5ebf759d2 Mon Sep 17 00:00:00 2001 From: Bernd Schmidt Date: Wed, 10 Oct 2007 17:54:19 +0800 Subject: Blackfin arch: fix bug libstdc++ calling writev with an iovec containing { NULL, 0 } fails on Blackfin Fix a problem reported in the forums - libstdc++ can call writev with an iovec containing { NULL, 0 }, which works fine on i686-linux, but fails on Blackfin. Fixed by allowing size 0 transfers to/from userspace regardless of the address. Signed-off-by: Bernd Schmidt Signed-off-by: Bryan Wu --- arch/blackfin/kernel/process.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/blackfin/kernel/process.c b/arch/blackfin/kernel/process.c index de7d048bd4e..9124467651c 100644 --- a/arch/blackfin/kernel/process.c +++ b/arch/blackfin/kernel/process.c @@ -395,7 +395,8 @@ void finish_atomic_sections (struct pt_regs *regs) #if defined(CONFIG_ACCESS_CHECK) int _access_ok(unsigned long addr, unsigned long size) { - + if (size == 0) + return 1; if (addr > (addr + size)) return 0; if (segment_eq(get_fs(), KERNEL_DS)) -- cgit v1.2.3-70-g09d2 From ddf416b2bce842105d29b170438fd1bc080456d0 Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Wed, 10 Oct 2007 18:06:47 +0800 Subject: Blackfin arch: fix typo in register name Signed-off-by: Mike Frysinger Signed-off-by: Bryan Wu --- arch/blackfin/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig index cc789b988f3..c35f549b54f 100644 --- a/arch/blackfin/Kconfig +++ b/arch/blackfin/Kconfig @@ -829,7 +829,7 @@ config L1_MAX_PIECE comment "Asynchonous Memory Configuration" -menu "EBIU_AMBCTL Global Control" +menu "EBIU_AMGCTL Global Control" config C_AMCKEN bool "Enable CLKOUT" default y -- cgit v1.2.3-70-g09d2 From 7417c8fe2e792b771b093c14e763816f154b62b4 Mon Sep 17 00:00:00 2001 From: Robin Getz Date: Wed, 10 Oct 2007 22:26:33 +0800 Subject: Blackfin arch: Remove cruft - CONFIG_DEBUG_SERIAL_EARLY_INIT and DEBUG_KERNEL_START Remove cruft - CONFIG_DEBUG_SERIAL_EARLY_INIT didn't work that well, and DEBUG_KERNEL_START was just implmented poorly. Will replace with a new checkin. Signed-off-by: Robin Getz Signed-off-by: Bryan Wu --- arch/blackfin/Kconfig | 18 ------------------ 1 file changed, 18 deletions(-) (limited to 'arch') diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig index c35f549b54f..b24f4535ffe 100644 --- a/arch/blackfin/Kconfig +++ b/arch/blackfin/Kconfig @@ -1039,24 +1039,6 @@ config DEBUG_ICACHE_CHECK also relocates the irq_panic() function to L1 memory, (which is un-cached). -config DEBUG_KERNEL_START - bool "Debug Kernel Startup" - depends on DEBUG_KERNEL - help - Say Y here to put in an mini-execption handler before the kernel - replaces the bootloader exception handler. This will stop kernels - from dieing at startup with no visible error messages. - -config DEBUG_SERIAL_EARLY_INIT - bool "Initialize serial driver early" - default n - depends on SERIAL_BFIN - help - Say Y here if you want to get kernel output early when kernel - crashes before the normal console initialization. If this option - is enable, console output will always go to the ttyBF0, no matter - what kernel boot paramters you set. - config DEBUG_HUNT_FOR_ZERO bool "Catch NULL pointer reads/writes" default y -- cgit v1.2.3-70-g09d2