From 9e2a7e6f5f1091965c78e01e87af05607bbf937f Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Tue, 18 Aug 2009 13:47:30 -0700 Subject: iop33x: update defconfig (default atu to on) By default the iop3xx configurations are set to boot the platforms over an nfs root configuration. Since commit c34002c1 "iop: unconditionally initialize the ATU on platforms known to be 'hosts'" this configuration also requires iop3xx_init_atu=y to be specified on the kernel command line. Signed-off-by: Dan Williams --- arch/arm/configs/iop33x_defconfig | 554 +++++++++++++++++++++++++++++--------- 1 file changed, 429 insertions(+), 125 deletions(-) (limited to 'arch') diff --git a/arch/arm/configs/iop33x_defconfig b/arch/arm/configs/iop33x_defconfig index eec48829826..ed2d59d0182 100644 --- a/arch/arm/configs/iop33x_defconfig +++ b/arch/arm/configs/iop33x_defconfig @@ -1,29 +1,26 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.24-rc5 -# Wed Dec 12 16:11:27 2007 +# Linux kernel version: 2.6.31-rc6 +# Tue Aug 18 13:41:41 2009 # CONFIG_ARM=y CONFIG_SYS_SUPPORTS_APM_EMULATION=y -# CONFIG_GENERIC_GPIO is not set -# CONFIG_GENERIC_TIME is not set -# CONFIG_GENERIC_CLOCKEVENTS is not set +CONFIG_GENERIC_GPIO=y CONFIG_MMU=y -# CONFIG_NO_IOPORT is not set CONFIG_GENERIC_HARDIRQS=y CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_HARDIRQS_SW_RESEND=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_RWSEM_GENERIC_SPINLOCK=y -# CONFIG_ARCH_HAS_ILOG2_U32 is not set -# CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_ZONE_DMA=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_VECTORS_BASE=0xffff0000 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -40,21 +37,39 @@ CONFIG_SYSVIPC_SYSCTL=y CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set # CONFIG_TASKSTATS is not set -# CONFIG_USER_NS is not set -# CONFIG_PID_NS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +# CONFIG_CLASSIC_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_GROUP_SCHED is not set # CONFIG_CGROUPS is not set -CONFIG_FAIR_GROUP_SCHED=y -CONFIG_FAIR_USER_SCHED=y -# CONFIG_FAIR_CGROUP_SCHED is not set -CONFIG_SYSFS_DEPRECATED=y +# CONFIG_SYSFS_DEPRECATED_V2 is not set # CONFIG_RELAY is not set +CONFIG_NAMESPACES=y +# CONFIG_UTS_NS is not set +# CONFIG_IPC_NS is not set +# CONFIG_USER_NS is not set +# CONFIG_PID_NS is not set +# CONFIG_NET_NS is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +CONFIG_RD_BZIP2=y +CONFIG_RD_LZMA=y CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y # CONFIG_EMBEDDED is not set CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y @@ -67,29 +82,48 @@ CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y + +# +# Performance Counters +# CONFIG_VM_EVENT_COUNTERS=y +CONFIG_PCI_QUIRKS=y +# CONFIG_STRIP_ASM_SYMS is not set +CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y + +# +# GCOV-based kernel profiling +# +# CONFIG_SLOW_WORK is not set +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y CONFIG_BLOCK=y -# CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set +CONFIG_LBDAF=y # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -103,6 +137,7 @@ CONFIG_IOSCHED_CFQ=y CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" +# CONFIG_FREEZER is not set # # System Type @@ -112,15 +147,15 @@ CONFIG_DEFAULT_IOSCHED="cfq" # CONFIG_ARCH_REALVIEW is not set # CONFIG_ARCH_VERSATILE is not set # CONFIG_ARCH_AT91 is not set -# CONFIG_ARCH_CLPS7500 is not set # CONFIG_ARCH_CLPS711X is not set -# CONFIG_ARCH_CO285 is not set +# CONFIG_ARCH_GEMINI is not set # CONFIG_ARCH_EBSA110 is not set # CONFIG_ARCH_EP93XX is not set # CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_STMP3XXX is not set # CONFIG_ARCH_NETX is not set # CONFIG_ARCH_H720X is not set -# CONFIG_ARCH_IMX is not set # CONFIG_ARCH_IOP13XX is not set # CONFIG_ARCH_IOP32X is not set CONFIG_ARCH_IOP33X=y @@ -128,19 +163,26 @@ CONFIG_ARCH_IOP33X=y # CONFIG_ARCH_IXP2000 is not set # CONFIG_ARCH_IXP4XX is not set # CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KIRKWOOD is not set +# CONFIG_ARCH_LOKI is not set +# CONFIG_ARCH_MV78XX0 is not set +# CONFIG_ARCH_ORION5X is not set +# CONFIG_ARCH_MMP is not set # CONFIG_ARCH_KS8695 is not set # CONFIG_ARCH_NS9XXX is not set -# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_W90X900 is not set # CONFIG_ARCH_PNX4008 is not set # CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_MSM is not set # CONFIG_ARCH_RPC is not set # CONFIG_ARCH_SA1100 is not set # CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_S3C64XX is not set # CONFIG_ARCH_SHARK is not set # CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_U300 is not set # CONFIG_ARCH_DAVINCI is not set # CONFIG_ARCH_OMAP is not set -CONFIG_IOP3XX_ATU=y # # IOP33x Implementation Options @@ -151,14 +193,6 @@ CONFIG_IOP3XX_ATU=y # CONFIG_ARCH_IQ80331=y CONFIG_MACH_IQ80332=y - -# -# Boot options -# - -# -# Power management -# CONFIG_PLAT_IOP=y # @@ -168,6 +202,7 @@ CONFIG_CPU_32=y CONFIG_CPU_XSCALE=y CONFIG_CPU_32v5=y CONFIG_CPU_ABRT_EV5T=y +CONFIG_CPU_PABRT_NOIFAR=y CONFIG_CPU_CACHE_VIVT=y CONFIG_CPU_TLB_V4WBI=y CONFIG_CPU_CP15=y @@ -178,7 +213,6 @@ CONFIG_CPU_CP15_MMU=y # # CONFIG_ARM_THUMB is not set # CONFIG_CPU_DCACHE_DISABLE is not set -# CONFIG_OUTER_CACHE is not set # CONFIG_IWMMXT is not set CONFIG_XSCALE_PMU=y @@ -190,40 +224,54 @@ CONFIG_PCI_SYSCALL=y # CONFIG_ARCH_SUPPORTS_MSI is not set CONFIG_PCI_LEGACY=y # CONFIG_PCI_DEBUG is not set +# CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set # CONFIG_PCCARD is not set # # Kernel Features # -# CONFIG_TICK_ONESHOT is not set +CONFIG_VMSPLIT_3G=y +# CONFIG_VMSPLIT_2G is not set +# CONFIG_VMSPLIT_1G is not set +CONFIG_PAGE_OFFSET=0xC0000000 # CONFIG_PREEMPT is not set CONFIG_HZ=100 # CONFIG_AEABI is not set -# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set +# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set +# CONFIG_HIGHMEM is not set CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4096 -# CONFIG_RESOURCES_64BIT is not set -CONFIG_ZONE_DMA_FLAG=1 -CONFIG_BOUNCE=y +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 CONFIG_VIRT_TO_BUS=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_ALIGNMENT_TRAP=y +# CONFIG_UACCESS_WITH_MEMCPY is not set # # Boot options # CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/nfs ip=bootp cachepolicy=writealloc" +CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/nfs ip=bootp cachepolicy=writealloc iop3xx_init_atu=y" # CONFIG_XIP_KERNEL is not set # CONFIG_KEXEC is not set +# +# CPU Power Management +# +# CONFIG_CPU_IDLE is not set + # # Floating point emulation # @@ -239,6 +287,8 @@ CONFIG_FPE_NWFPE=y # Userspace binary formats # CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_HAVE_AOUT=y CONFIG_BINFMT_AOUT=y # CONFIG_BINFMT_MISC is not set # CONFIG_ARTHUR is not set @@ -247,11 +297,7 @@ CONFIG_BINFMT_AOUT=y # Power management options # # CONFIG_PM is not set -CONFIG_SUSPEND_UP_POSSIBLE=y - -# -# Networking -# +CONFIG_ARCH_SUSPEND_POSSIBLE=y CONFIG_NET=y # @@ -264,6 +310,7 @@ CONFIG_XFRM=y # CONFIG_XFRM_USER is not set # CONFIG_XFRM_SUB_POLICY is not set # CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set # CONFIG_NET_KEY is not set CONFIG_INET=y CONFIG_IP_MULTICAST=y @@ -310,6 +357,7 @@ CONFIG_IPV6=y # CONFIG_IPV6_SIT is not set # CONFIG_IPV6_TUNNEL is not set # CONFIG_IPV6_MULTIPLE_TABLES is not set +# CONFIG_IPV6_MROUTE is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set @@ -317,6 +365,7 @@ CONFIG_IPV6=y # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -326,24 +375,31 @@ CONFIG_IPV6=y # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # # Network testing # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set +CONFIG_WIRELESS=y +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_OLD_REGULATORY is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_LIB80211 is not set # -# Wireless +# CFG80211 needs to be enabled for MAC80211 # -# CONFIG_CFG80211 is not set -# CONFIG_WIRELESS_EXT is not set -# CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set +CONFIG_MAC80211_DEFAULT_PS_VALUE=0 +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -357,7 +413,9 @@ CONFIG_IPV6=y CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y -# CONFIG_FW_LOADER is not set +CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" # CONFIG_DEBUG_DRIVER is not set # CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set @@ -366,12 +424,14 @@ CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set # CONFIG_MTD_CONCAT is not set CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_TESTS is not set CONFIG_MTD_REDBOOT_PARTS=y CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1 CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y CONFIG_MTD_REDBOOT_PARTS_READONLY=y # CONFIG_MTD_CMDLINE_PARTS is not set # CONFIG_MTD_AFS_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set # # User Modules And Translation Layers @@ -421,9 +481,7 @@ CONFIG_MTD_CFI_UTIL=y # # CONFIG_MTD_COMPLEX_MAPPINGS is not set CONFIG_MTD_PHYSMAP=y -CONFIG_MTD_PHYSMAP_START=0x0 -CONFIG_MTD_PHYSMAP_LEN=0x0 -CONFIG_MTD_PHYSMAP_BANKWIDTH=1 +# CONFIG_MTD_PHYSMAP_COMPAT is not set # CONFIG_MTD_ARM_INTEGRATOR is not set # CONFIG_MTD_INTEL_VR_NOR is not set # CONFIG_MTD_PLATRAM is not set @@ -446,6 +504,11 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=1 # CONFIG_MTD_NAND is not set # CONFIG_MTD_ONENAND is not set +# +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set + # # UBI - Unsorted block images # @@ -463,14 +526,29 @@ CONFIG_BLK_DEV_NBD=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=8192 -CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set +# CONFIG_MG_DISK is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set -# CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set +# CONFIG_ICS932S401 is not set +# CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_HP_ILO is not set +# CONFIG_ISL29003 is not set +# CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_MAX6875 is not set +# CONFIG_EEPROM_93CX6 is not set +# CONFIG_CB710_CORE is not set +CONFIG_HAVE_IDE=y # CONFIG_IDE is not set # @@ -492,10 +570,6 @@ CONFIG_BLK_DEV_SD=y # CONFIG_BLK_DEV_SR is not set CONFIG_CHR_DEV_SG=y # CONFIG_CHR_DEV_SCH is not set - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# # CONFIG_SCSI_MULTI_LUN is not set # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set @@ -512,6 +586,8 @@ CONFIG_SCSI_WAIT_SCAN=m # CONFIG_SCSI_SRP_ATTRS is not set CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set +# CONFIG_SCSI_CXGB3_ISCSI is not set +# CONFIG_SCSI_BNX2_ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -520,13 +596,18 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_AIC7XXX_OLD is not set # CONFIG_SCSI_AIC79XX is not set # CONFIG_SCSI_AIC94XX is not set +# CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_DPT_I2O is not set # CONFIG_SCSI_ADVANSYS is not set # CONFIG_SCSI_ARCMSR is not set # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set +# CONFIG_SCSI_MPT2SAS is not set # CONFIG_SCSI_HPTIOP is not set +# CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set +# CONFIG_FCOE is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set # CONFIG_SCSI_IPS is not set @@ -543,15 +624,18 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_SRP is not set +# CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set # CONFIG_ATA is not set CONFIG_MD=y CONFIG_BLK_DEV_MD=y +CONFIG_MD_AUTODETECT=y CONFIG_MD_LINEAR=y CONFIG_MD_RAID0=y CONFIG_MD_RAID1=y # CONFIG_MD_RAID10 is not set CONFIG_MD_RAID456=y -# CONFIG_MD_RAID5_RESHAPE is not set +CONFIG_MD_RAID6_PQ=y # CONFIG_MD_MULTIPATH is not set # CONFIG_MD_FAULTY is not set CONFIG_BLK_DEV_DM=y @@ -568,27 +652,34 @@ CONFIG_BLK_DEV_DM=y # # IEEE 1394 (FireWire) support # + +# +# You can enable one or both FireWire driver stacks. +# + +# +# See the help texts for more information. +# # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set # CONFIG_VETH is not set -# CONFIG_IP1000 is not set # CONFIG_ARCNET is not set # CONFIG_NET_ETHERNET is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set CONFIG_E1000=y -CONFIG_E1000_NAPI=y -# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set # CONFIG_E1000E is not set +# CONFIG_IP1000 is not set +# CONFIG_IGB is not set +# CONFIG_IGBVF is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -596,23 +687,34 @@ CONFIG_E1000_NAPI=y # CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SKY2 is not set -# CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +# CONFIG_CNIC is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set +# CONFIG_ATL1E is not set +# CONFIG_ATL1C is not set +# CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set +CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_CHELSIO_T3 is not set +# CONFIG_ENIC is not set # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set +# CONFIG_VXGE is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set +# CONFIG_MLX4_EN is not set # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set +# CONFIG_BNX2X is not set +# CONFIG_QLGE is not set +# CONFIG_SFC is not set +# CONFIG_BE2NET is not set # CONFIG_TR is not set # @@ -620,13 +722,16 @@ CONFIG_NETDEV_10000=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set # CONFIG_NET_FC is not set -# CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set @@ -670,10 +775,13 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # Character devices # CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y # CONFIG_VT_HW_CONSOLE_BINDING is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set +# CONFIG_NOZOMI is not set # # Serial drivers @@ -692,11 +800,12 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y -# CONFIG_NVRAM is not set +# CONFIG_HW_RANDOM_TIMERIOMEM is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # CONFIG_RAW_DRIVER is not set @@ -705,16 +814,14 @@ CONFIG_DEVPORT=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y CONFIG_I2C_CHARDEV=y +CONFIG_I2C_HELPER_AUTO=y # -# I2C Algorithms +# I2C Hardware Bus support # -# CONFIG_I2C_ALGOBIT is not set -# CONFIG_I2C_ALGOPCF is not set -# CONFIG_I2C_ALGOPCA is not set # -# I2C Hardware Bus support +# PC SMBus host controller drivers # # CONFIG_I2C_ALI1535 is not set # CONFIG_I2C_ALI1563 is not set @@ -722,50 +829,82 @@ CONFIG_I2C_CHARDEV=y # CONFIG_I2C_AMD756 is not set # CONFIG_I2C_AMD8111 is not set # CONFIG_I2C_I801 is not set -# CONFIG_I2C_I810 is not set +# CONFIG_I2C_ISCH is not set # CONFIG_I2C_PIIX4 is not set -CONFIG_I2C_IOP3XX=y # CONFIG_I2C_NFORCE2 is not set -# CONFIG_I2C_OCORES is not set -# CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_PROSAVAGE is not set -# CONFIG_I2C_SAVAGE4 is not set -# CONFIG_I2C_SIMTEC is not set # CONFIG_I2C_SIS5595 is not set # CONFIG_I2C_SIS630 is not set # CONFIG_I2C_SIS96X is not set -# CONFIG_I2C_TAOS_EVM is not set -# CONFIG_I2C_STUB is not set # CONFIG_I2C_VIA is not set # CONFIG_I2C_VIAPRO is not set + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +# CONFIG_I2C_GPIO is not set +CONFIG_I2C_IOP3XX=y +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set + +# +# Graphics adapter I2C/DDC channel drivers +# # CONFIG_I2C_VOODOO3 is not set +# +# Other I2C/SMBus bus drivers +# +# CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_STUB is not set + # # Miscellaneous I2C Chip support # -# CONFIG_SENSORS_DS1337 is not set -# CONFIG_SENSORS_DS1374 is not set # CONFIG_DS1682 is not set -# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set +# CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set +# CONFIG_SPI is not set +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_GPIOLIB=y +# CONFIG_DEBUG_GPIO is not set +# CONFIG_GPIO_SYSFS is not set # -# SPI support +# Memory mapped GPIO expanders: +# + +# +# I2C GPIO expanders: +# +# CONFIG_GPIO_MAX732X is not set +# CONFIG_GPIO_PCA953X is not set +# CONFIG_GPIO_PCF857X is not set + +# +# PCI GPIO expanders: +# +# CONFIG_GPIO_BT8XX is not set + +# +# SPI GPIO expanders: # -# CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_AD7414 is not set # CONFIG_SENSORS_AD7418 is not set # CONFIG_SENSORS_ADM1021 is not set # CONFIG_SENSORS_ADM1025 is not set @@ -773,13 +912,17 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADM1029 is not set # CONFIG_SENSORS_ADM1031 is not set # CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ADT7462 is not set # CONFIG_SENSORS_ADT7470 is not set +# CONFIG_SENSORS_ADT7473 is not set +# CONFIG_SENSORS_ADT7475 is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_I5K_AMB is not set # CONFIG_SENSORS_F71805F is not set # CONFIG_SENSORS_F71882FG is not set # CONFIG_SENSORS_F75375S is not set +# CONFIG_SENSORS_G760A is not set # CONFIG_SENSORS_GL518SM is not set # CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set @@ -794,16 +937,23 @@ CONFIG_HWMON=y # CONFIG_SENSORS_LM90 is not set # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_LTC4215 is not set +# CONFIG_SENSORS_LTC4245 is not set +# CONFIG_SENSORS_LM95241 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_SHT15 is not set # CONFIG_SENSORS_SIS5595 is not set # CONFIG_SENSORS_DME1737 is not set # CONFIG_SENSORS_SMSC47M1 is not set # CONFIG_SENSORS_SMSC47M192 is not set # CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_ADS7828 is not set # CONFIG_SENSORS_THMC50 is not set +# CONFIG_SENSORS_TMP401 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_VT8231 is not set @@ -812,28 +962,38 @@ CONFIG_HWMON=y # CONFIG_SENSORS_W83792D is not set # CONFIG_SENSORS_W83793 is not set # CONFIG_SENSORS_W83L785TS is not set +# CONFIG_SENSORS_W83L786NG is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set # CONFIG_HWMON_DEBUG_CHIP is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set - -# -# Multimedia devices -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -CONFIG_DAB=y +# CONFIG_MFD_ASIC3 is not set +# CONFIG_HTC_EGPIO is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_TPS65010 is not set +# CONFIG_TWL4030_CORE is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_TC6393XB is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_PCF50633 is not set +# CONFIG_AB3100_CORE is not set +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support @@ -854,15 +1014,16 @@ CONFIG_DAB=y # # CONFIG_VGA_CONSOLE is not set CONFIG_DUMMY_CONSOLE=y - -# -# Sound -# # CONFIG_SOUND is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y # CONFIG_HID_DEBUG is not set # CONFIG_HIDRAW is not set +# CONFIG_HID_PID is not set + +# +# Special HID drivers +# CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -870,14 +1031,21 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_USB is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# Enable Host or Gadget support to see Inventra options # # -# USB Gadget Support +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # CONFIG_USB_GADGET is not set + +# +# OTG and related infrastructure +# +# CONFIG_UWB is not set # CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_NEW_LEDS is not set CONFIG_RTC_LIB=y # CONFIG_RTC_CLASS is not set @@ -893,6 +1061,12 @@ CONFIG_DMA_ENGINE=y # DMA Clients # CONFIG_NET_DMA=y +# CONFIG_ASYNC_TX_DMA is not set +# CONFIG_DMATEST is not set +# CONFIG_AUXDISPLAY is not set +# CONFIG_REGULATOR is not set +# CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems @@ -901,10 +1075,11 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set CONFIG_JBD=y CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set @@ -913,16 +1088,22 @@ CONFIG_FS_MBCACHE=y # CONFIG_XFS_FS is not set # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set +# CONFIG_BTRFS_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y +CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -941,15 +1122,13 @@ CONFIG_DNOTIFY=y # CONFIG_PROC_FS=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set @@ -959,29 +1138,31 @@ CONFIG_TMPFS=y # CONFIG_EFS_FS is not set # CONFIG_JFFS2_FS is not set CONFIG_CRAMFS=y +# CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set +CONFIG_ROOT_NFS=y CONFIG_NFSD=y CONFIG_NFSD_V3=y # CONFIG_NFSD_V3_ACL is not set # CONFIG_NFSD_V4 is not set -# CONFIG_NFSD_TCP is not set -CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_EXPORTFS=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_BIND34 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1013,9 +1194,6 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_SYSV68_PARTITION is not set # CONFIG_NLS is not set # CONFIG_DLM is not set -CONFIG_INSTRUMENTATION=y -# CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set # # Kernel hacking @@ -1023,6 +1201,7 @@ CONFIG_INSTRUMENTATION=y # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set @@ -1030,10 +1209,17 @@ CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set # CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_KMEMLEAK is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set @@ -1047,16 +1233,41 @@ CONFIG_SCHED_DEBUG=y CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +CONFIG_DEBUG_MEMORY_INIT=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set CONFIG_FRAME_POINTER=y -# CONFIG_FORCED_INLINING is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +# CONFIG_SYSCTL_SYSCALL_CHECK is not set +# CONFIG_PAGE_POISONING is not set +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_TRACING_SUPPORT=y +CONFIG_FTRACE=y +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_ENABLE_DEFAULT_TRACERS is not set +# CONFIG_BOOT_TRACER is not set +CONFIG_BRANCH_PROFILE_NONE=y +# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set +# CONFIG_PROFILE_ALL_BRANCHES is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set CONFIG_DEBUG_USER=y # CONFIG_DEBUG_ERRORS is not set +# CONFIG_DEBUG_STACK_USAGE is not set CONFIG_DEBUG_LL=y # CONFIG_DEBUG_ICEDCC is not set @@ -1065,24 +1276,117 @@ CONFIG_DEBUG_LL=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_XOR_BLOCKS=y CONFIG_ASYNC_CORE=y CONFIG_ASYNC_MEMCPY=y CONFIG_ASYNC_XOR=y -# CONFIG_CRYPTO is not set +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +# CONFIG_CRYPTO_FIPS is not set +# CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_MANAGER2 is not set +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +# CONFIG_CRYPTO_CBC is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_MD4 is not set +# CONFIG_CRYPTO_MD5 is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set +# CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set +CONFIG_CRYPTO_HW=y +# CONFIG_CRYPTO_DEV_HIFN_795X is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines # +CONFIG_GENERIC_FIND_LAST_BIT=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set # CONFIG_CRC_ITU_T is not set # CONFIG_CRC32 is not set # CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y -CONFIG_PLIST=y +CONFIG_DECOMPRESS_GZIP=y +CONFIG_DECOMPRESS_BZIP2=y +CONFIG_DECOMPRESS_LZMA=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_NLATTR=y -- cgit v1.2.3-70-g09d2 From 5b9eda3313b678f20f2bec08e8173f93e85f6c14 Mon Sep 17 00:00:00 2001 From: Aaro Koskinen Date: Fri, 31 Jul 2009 12:16:21 +0300 Subject: iop3xx: ATU and PCI memory configuration corrected There are two 64 MB outbound memory windows at bus addresses 0x80000000..0x83ffffff and 0x84000000..0x87ffffff for PCI memory. Currently, on iop32x, only the lower window is available for allocations, limiting the available space to 64 MB. On iop33x the full 128 MB can be allocated, but the translation value is wrong for the upper window. The patch enables the full 128 MB space on iop32x and corrects the initialization of OMWTVR1. Redundant definitions are deleted. Tested using a Thecus N2100 board with a graphics adapter in the expansion slot. Both windows are in use: 00:05.0 VGA compatible controller: XGI Technology Inc. (eXtreme Graphics Innovation) Volari Z7 (prog-if 00 [VGA controller]) [...] Region 0: Memory at 80000000 (32-bit, prefetchable) [size=64M] Region 1: Memory at 84080000 (32-bit, non-prefetchable) [size=256K] Signed-off-by: Aaro Koskinen Cc: Lennert Buytenhek Signed-off-by: Dan Williams --- arch/arm/include/asm/hardware/iop3xx.h | 1 + arch/arm/mach-iop32x/include/mach/iop32x.h | 2 -- arch/arm/mach-iop33x/include/mach/iop33x.h | 2 -- arch/arm/plat-iop/pci.c | 3 ++- 4 files changed, 3 insertions(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/arm/include/asm/hardware/iop3xx.h b/arch/arm/include/asm/hardware/iop3xx.h index 4b8e7f55992..8d60ad267e3 100644 --- a/arch/arm/include/asm/hardware/iop3xx.h +++ b/arch/arm/include/asm/hardware/iop3xx.h @@ -215,6 +215,7 @@ extern int iop3xx_get_init_atu(void); * IOP3XX I/O and Mem space regions for PCI autoconfiguration */ #define IOP3XX_PCI_LOWER_MEM_PA 0x80000000 +#define IOP3XX_PCI_MEM_WINDOW_SIZE 0x08000000 #define IOP3XX_PCI_IO_WINDOW_SIZE 0x00010000 #define IOP3XX_PCI_LOWER_IO_PA 0x90000000 diff --git a/arch/arm/mach-iop32x/include/mach/iop32x.h b/arch/arm/mach-iop32x/include/mach/iop32x.h index abd9eb49f10..941f363aca5 100644 --- a/arch/arm/mach-iop32x/include/mach/iop32x.h +++ b/arch/arm/mach-iop32x/include/mach/iop32x.h @@ -31,7 +31,5 @@ #define IOP32X_MAX_RAM_SIZE 0x40000000UL #define IOP3XX_MAX_RAM_SIZE IOP32X_MAX_RAM_SIZE #define IOP3XX_PCI_LOWER_MEM_BA 0x80000000 -#define IOP32X_PCI_MEM_WINDOW_SIZE 0x04000000 -#define IOP3XX_PCI_MEM_WINDOW_SIZE IOP32X_PCI_MEM_WINDOW_SIZE #endif diff --git a/arch/arm/mach-iop33x/include/mach/iop33x.h b/arch/arm/mach-iop33x/include/mach/iop33x.h index 24567316ec8..a89c0a234bf 100644 --- a/arch/arm/mach-iop33x/include/mach/iop33x.h +++ b/arch/arm/mach-iop33x/include/mach/iop33x.h @@ -36,8 +36,6 @@ #define IOP33X_MAX_RAM_SIZE 0x80000000UL #define IOP3XX_MAX_RAM_SIZE IOP33X_MAX_RAM_SIZE #define IOP3XX_PCI_LOWER_MEM_BA (PHYS_OFFSET + IOP33X_MAX_RAM_SIZE) -#define IOP33X_PCI_MEM_WINDOW_SIZE 0x08000000 -#define IOP3XX_PCI_MEM_WINDOW_SIZE IOP33X_PCI_MEM_WINDOW_SIZE #endif diff --git a/arch/arm/plat-iop/pci.c b/arch/arm/plat-iop/pci.c index 77fa7cc7d16..ce31f316ac7 100644 --- a/arch/arm/plat-iop/pci.c +++ b/arch/arm/plat-iop/pci.c @@ -257,7 +257,8 @@ void __init iop3xx_atu_setup(void) *IOP3XX_OUMWTVR0 = 0; /* Outbound window 1 */ - *IOP3XX_OMWTVR1 = IOP3XX_PCI_LOWER_MEM_BA + IOP3XX_PCI_MEM_WINDOW_SIZE; + *IOP3XX_OMWTVR1 = IOP3XX_PCI_LOWER_MEM_BA + + IOP3XX_PCI_MEM_WINDOW_SIZE / 2; *IOP3XX_OUMWTVR1 = 0; /* BAR 3 ( Disabled ) */ -- cgit v1.2.3-70-g09d2 From a692838dcaacb5f6f05fac73abb99d92dd7b1021 Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Sun, 2 Aug 2009 10:46:45 +0200 Subject: arch/arm/plat-iop: Use DIV_ROUND_CLOSEST The kernel.h macro DIV_ROUND_CLOSEST performs the computation (x + d/2)/d but is perhaps more readable. The semantic patch that makes this change is as follows: (http://www.emn.fr/x-info/coccinelle/) // @haskernel@ @@ #include @depends on haskernel@ expression x,__divisor; @@ - (((x) + ((__divisor) / 2)) / (__divisor)) + DIV_ROUND_CLOSEST(x,__divisor) // Signed-off-by: Julia Lawall Signed-off-by: Dan Williams --- arch/arm/plat-iop/time.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/plat-iop/time.c b/arch/arm/plat-iop/time.c index 3695bbe3ee2..8da95d57c21 100644 --- a/arch/arm/plat-iop/time.c +++ b/arch/arm/plat-iop/time.c @@ -85,7 +85,7 @@ void __init iop_init_time(unsigned long tick_rate) { u32 timer_ctl; - ticks_per_jiffy = (tick_rate + HZ/2) / HZ; + ticks_per_jiffy = DIV_ROUND_CLOSEST(tick_rate, HZ); ticks_per_usec = tick_rate / 1000000; next_jiffy_time = 0xffffffff; iop_tick_rate = tick_rate; -- cgit v1.2.3-70-g09d2 From 7f8b7170cdda6645ed4fec4b2d415bf4cebd7839 Mon Sep 17 00:00:00 2001 From: Russell King Date: Sun, 27 Sep 2009 16:50:05 +0100 Subject: ARM: Fix section mismatch warning in Integrator pci_v3 WARNING: vmlinux.o(.text+0xc9d4): Section mismatch in reference from the function pci_v3_scan_bus() to the function .devinit.text:pci_scan_bus_parented() The function pci_v3_scan_bus() references the function __devinit pci_scan_bus_parented(). This is often because pci_v3_scan_bus lacks a __devinit annotation or the annotation of pci_scan_bus_parented is wrong. Signed-off-by: Russell King Acked-by: Sam Ravnborg --- arch/arm/mach-integrator/pci_v3.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-integrator/pci_v3.c b/arch/arm/mach-integrator/pci_v3.c index f1d72b22545..901cc205015 100644 --- a/arch/arm/mach-integrator/pci_v3.c +++ b/arch/arm/mach-integrator/pci_v3.c @@ -486,7 +486,7 @@ int __init pci_v3_setup(int nr, struct pci_sys_data *sys) return ret; } -struct pci_bus *pci_v3_scan_bus(int nr, struct pci_sys_data *sys) +struct pci_bus * __init pci_v3_scan_bus(int nr, struct pci_sys_data *sys) { return pci_scan_bus(sys->busnr, &pci_v3_ops, sys); } -- cgit v1.2.3-70-g09d2 From fac28e6df9b5fdfa0cf6b99eae022609dd1108d5 Mon Sep 17 00:00:00 2001 From: Russell King Date: Sun, 27 Sep 2009 17:32:47 +0100 Subject: ARM: Fix SA11x0 clocksource warning 8e19608 missed updating SA11x0, and thus: arch/arm/mach-sa1100/time.c:88: warning: initialization from incompatible pointer type Signed-off-by: Russell King --- arch/arm/mach-sa1100/time.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-sa1100/time.c b/arch/arm/mach-sa1100/time.c index 95d92e8e56a..b9cbb56d6e9 100644 --- a/arch/arm/mach-sa1100/time.c +++ b/arch/arm/mach-sa1100/time.c @@ -77,7 +77,7 @@ static struct clock_event_device ckevt_sa1100_osmr0 = { .set_mode = sa1100_osmr0_set_mode, }; -static cycle_t sa1100_read_oscr(void) +static cycle_t sa1100_read_oscr(struct clocksource *s) { return OSCR; } -- cgit v1.2.3-70-g09d2 From d80ade7b323152672bf66e74ec11c324332f6d1e Mon Sep 17 00:00:00 2001 From: Russell King Date: Sun, 27 Sep 2009 17:40:03 +0100 Subject: ARM: Fix warning: #warning syscall migrate_pages not implemented We're not implementing this syscall (we're not NUMA) so we might as well silence this warning. Signed-off-by: Russell King --- arch/arm/include/asm/unistd.h | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/arm/include/asm/unistd.h b/arch/arm/include/asm/unistd.h index 89f7eade20a..7020217fc49 100644 --- a/arch/arm/include/asm/unistd.h +++ b/arch/arm/include/asm/unistd.h @@ -456,6 +456,7 @@ * Unimplemented (or alternatively implemented) syscalls */ #define __IGNORE_fadvise64_64 1 +#define __IGNORE_migrate_pages 1 #endif /* __KERNEL__ */ #endif /* __ASM_ARM_UNISTD_H */ -- cgit v1.2.3-70-g09d2 From 041d785f807c8e92e11cc1bd2b3438f7823e63d2 Mon Sep 17 00:00:00 2001 From: Russell King Date: Sun, 27 Sep 2009 17:40:42 +0100 Subject: ARM: Fix warning: unused variable 'highmem' Signed-off-by: Russell King --- arch/arm/mm/mmu.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch') diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c index 4426ee67cec..ce551ec2cb2 100644 --- a/arch/arm/mm/mmu.c +++ b/arch/arm/mm/mmu.c @@ -726,6 +726,8 @@ static void __init sanity_check_meminfo(void) bank->size = VMALLOC_MIN - __va(bank->start); } #else + bank->highmem = highmem; + /* * Check whether this memory bank would entirely overlap * the vmalloc area. -- cgit v1.2.3-70-g09d2 From d5fc79cca2ec8d70200aee3c01cfc95fa35892ea Mon Sep 17 00:00:00 2001 From: Jaswinder Singh Rajput Date: Sat, 26 Sep 2009 20:20:06 +0530 Subject: ARM: Remove unused CONFIG SA1100_H3XXX Removed unused CONFIG SA1100_H3XXX from Kconfig and defconfig Reported-by: Robert P. J. Day Signed-off-by: Jaswinder Singh Rajput Acked-by: Dmitry Artamonow Cc: Philipp Zabel Cc: Kristoffer Ericson Signed-off-by: Russell King --- arch/arm/configs/h3600_defconfig | 1 - arch/arm/mach-sa1100/Kconfig | 5 ----- 2 files changed, 6 deletions(-) (limited to 'arch') diff --git a/arch/arm/configs/h3600_defconfig b/arch/arm/configs/h3600_defconfig index 1502957db2c..f6aed7747d4 100644 --- a/arch/arm/configs/h3600_defconfig +++ b/arch/arm/configs/h3600_defconfig @@ -90,7 +90,6 @@ CONFIG_ARCH_SA1100=y # CONFIG_SA1100_COLLIE is not set # CONFIG_SA1100_H3100 is not set CONFIG_SA1100_H3600=y -CONFIG_SA1100_H3XXX=y # CONFIG_SA1100_BADGE4 is not set # CONFIG_SA1100_JORNADA720 is not set # CONFIG_SA1100_HACKKIT is not set diff --git a/arch/arm/mach-sa1100/Kconfig b/arch/arm/mach-sa1100/Kconfig index 81ffff7ed49..4e5c07f4e45 100644 --- a/arch/arm/mach-sa1100/Kconfig +++ b/arch/arm/mach-sa1100/Kconfig @@ -71,11 +71,6 @@ config SA1100_H3600 -config SA1100_H3XXX - bool - depends on SA1100_H3100 || SA1100_H3600 - default y - config SA1100_BADGE4 bool "HP Labs BadgePAD 4" select SA1111 -- cgit v1.2.3-70-g09d2 From 9a0f6b4646a0acaf7f06fd2e02f10f303fe85d8f Mon Sep 17 00:00:00 2001 From: Jaswinder Singh Rajput Date: Tue, 22 Sep 2009 18:37:01 +0530 Subject: ARM: includecheck fix: mach-davinci, board-dm365-evm.c fix the following 'make includecheck' warning: arch/arm/mach-davinci/board-dm365-evm.c: mach/common.h is included more than once. Signed-off-by: Jaswinder Singh Rajput Acked-by: Kevin Hilman Signed-off-by: Russell King --- arch/arm/mach-davinci/board-dm365-evm.c | 1 - 1 file changed, 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-davinci/board-dm365-evm.c b/arch/arm/mach-davinci/board-dm365-evm.c index a1d5e7dac74..52dd8046b30 100644 --- a/arch/arm/mach-davinci/board-dm365-evm.c +++ b/arch/arm/mach-davinci/board-dm365-evm.c @@ -35,7 +35,6 @@ #include #include #include -#include #include #include -- cgit v1.2.3-70-g09d2 From e616c591405c168f6dc3dfd1221e105adfe49b8d Mon Sep 17 00:00:00 2001 From: Russell King Date: Sun, 27 Sep 2009 20:55:43 +0100 Subject: ARM: Don't allow highmem on SMP platforms without h/w TLB ops broadcast We suffer an unfortunate combination of "features" which makes highmem support on platforms without hardware TLB maintainence broadcast difficult: - we need kmap_high_get() support for DMA cache coherence - this requires kmap_high() to take a spinlock with IRQs disabled - kmap_high() occasionally calls flush_all_zero_pkmaps() to clear out old mappings - flush_all_zero_pkmaps() calls flush_tlb_kernel_range(), which on s/w IPI'd systems eventually calls smp_call_function_many() - smp_call_function_many() must not be called with IRQs disabled: WARNING: at kernel/smp.c:380 smp_call_function_many+0xc4/0x240() Modules linked in: Backtrace: [] (dump_backtrace+0x0/0x108) from [] (dump_stack+0x18/0x1c) r6:c007cd18 r5:c02ff228 r4:0000017c [] (dump_stack+0x0/0x1c) from [] (warn_slowpath_common+0x50/0x80) [] (warn_slowpath_common+0x0/0x80) from [] (warn_slowpath_null+0x18/0x1c) r7:00000003 r6:00000001 r5:c1ff4000 r4:c035fa34 [] (warn_slowpath_null+0x0/0x1c) from [] (smp_call_function_many+0xc4/0x240) [] (smp_call_function_many+0x0/0x240) from [] (smp_call_function+0x2c/0x38) [] (smp_call_function+0x0/0x38) from [] (on_each_cpu+0x1c/0x38) [] (on_each_cpu+0x0/0x38) from [] (flush_tlb_kernel_range+0x50/0x58) r6:00000001 r5:00000800 r4:c05f3590 [] (flush_tlb_kernel_range+0x0/0x58) from [] (flush_all_zero_pkmaps+0xc0/0xe8) [] (flush_all_zero_pkmaps+0x0/0xe8) from [] (kmap_high+0x8c/0x1e0) [] (kmap_high+0x0/0x1e0) from [] (kmap+0x44/0x5c) [] (kmap+0x0/0x5c) from [] (cramfs_readpage+0x3c/0x194) [] (cramfs_readpage+0x0/0x194) from [] (__do_page_cache_readahead+0x1f0/0x290) [] (__do_page_cache_readahead+0x0/0x290) from [] (ra_submit+0x30/0x38) [] (ra_submit+0x0/0x38) from [] (filemap_fault+0x3dc/0x438) r4:c1819988 [] (filemap_fault+0x0/0x438) from [] (__do_fault+0x58/0x43c) [] (__do_fault+0x0/0x43c) from [] (handle_mm_fault+0x104/0x318) [] (handle_mm_fault+0x0/0x318) from [] (do_page_fault+0x188/0x1e4) [] (do_page_fault+0x0/0x1e4) from [] (do_translation_fault+0x7c/0x84) [] (do_translation_fault+0x0/0x84) from [] (do_DataAbort+0x40/0xa4) r8:c1ff5e20 r7:c0340120 r6:00000805 r5:c1ff5e54 r4:c03400d0 [] (do_DataAbort+0x0/0xa4) from [] (__dabt_svc+0x4c/0x60) ... So we disable highmem support on these systems. Signed-off-by: Russell King --- arch/arm/include/asm/smp_plat.h | 16 ++++++++++++++++ arch/arm/kernel/smp.c | 7 +------ arch/arm/mm/mmu.c | 37 +++++++++++++++++++++++++++++++++---- 3 files changed, 50 insertions(+), 10 deletions(-) create mode 100644 arch/arm/include/asm/smp_plat.h (limited to 'arch') diff --git a/arch/arm/include/asm/smp_plat.h b/arch/arm/include/asm/smp_plat.h new file mode 100644 index 00000000000..59303e20084 --- /dev/null +++ b/arch/arm/include/asm/smp_plat.h @@ -0,0 +1,16 @@ +/* + * ARM specific SMP header, this contains our implementation + * details. + */ +#ifndef __ASMARM_SMP_PLAT_H +#define __ASMARM_SMP_PLAT_H + +#include + +/* all SMP configurations have the extended CPUID registers */ +static inline int tlb_ops_need_broadcast(void) +{ + return ((read_cpuid_ext(CPUID_EXT_MMFR3) >> 12) & 0xf) < 2; +} + +#endif diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c index e0d32770bb3..9d015ee5747 100644 --- a/arch/arm/kernel/smp.c +++ b/arch/arm/kernel/smp.c @@ -36,6 +36,7 @@ #include #include #include +#include /* * as from 2.5, kernels no longer have an init_tasks structure @@ -586,12 +587,6 @@ struct tlb_args { unsigned long ta_end; }; -/* all SMP configurations have the extended CPUID registers */ -static inline int tlb_ops_need_broadcast(void) -{ - return ((read_cpuid_ext(CPUID_EXT_MMFR3) >> 12) & 0xf) < 2; -} - static inline void ipi_flush_tlb_all(void *ignored) { local_flush_tlb_all(); diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c index ce551ec2cb2..02243eeccf5 100644 --- a/arch/arm/mm/mmu.c +++ b/arch/arm/mm/mmu.c @@ -21,6 +21,7 @@ #include #include #include +#include #include #include @@ -709,10 +710,6 @@ static void __init sanity_check_meminfo(void) if (meminfo.nr_banks >= NR_BANKS) { printk(KERN_CRIT "NR_BANKS too low, " "ignoring high memory\n"); - } else if (cache_is_vipt_aliasing()) { - printk(KERN_CRIT "HIGHMEM is not yet supported " - "with VIPT aliasing cache, " - "ignoring high memory\n"); } else { memmove(bank + 1, bank, (meminfo.nr_banks - i) * sizeof(*bank)); @@ -756,6 +753,38 @@ static void __init sanity_check_meminfo(void) #endif j++; } +#ifdef CONFIG_HIGHMEM + if (highmem) { + const char *reason = NULL; + + if (cache_is_vipt_aliasing()) { + /* + * Interactions between kmap and other mappings + * make highmem support with aliasing VIPT caches + * rather difficult. + */ + reason = "with VIPT aliasing cache"; +#ifdef CONFIG_SMP + } else if (tlb_ops_need_broadcast()) { + /* + * kmap_high needs to occasionally flush TLB entries, + * however, if the TLB entries need to be broadcast + * we may deadlock: + * kmap_high(irqs off)->flush_all_zero_pkmaps-> + * flush_tlb_kernel_range->smp_call_function_many + * (must not be called with irqs off) + */ + reason = "without hardware TLB ops broadcasting"; +#endif + } + if (reason) { + printk(KERN_CRIT "HIGHMEM is not supported %s, ignoring high memory\n", + reason); + while (j > 0 && meminfo.bank[j - 1].highmem) + j--; + } + } +#endif meminfo.nr_banks = j; } -- cgit v1.2.3-70-g09d2 From 90140c30a7b8c77e8872a389d48678d78e58789f Mon Sep 17 00:00:00 2001 From: Russell King Date: Sun, 27 Sep 2009 21:04:48 +0100 Subject: ARM: Fix __cpuexit section mismatch warnings Fix: WARNING: vmlinux.o(.text+0x247c): Section mismatch in reference from the function cpu_idle() to the function .cpuexit.text:cpu_die() The function cpu_idle() references a function in an exit section. Often the function cpu_die() has valid usage outside the exit section and the fix is to remove the __cpuexit annotation of cpu_die. WARNING: vmlinux.o(.cpuexit.text+0x3c): Section mismatch in reference from the function cpu_die() to the function .cpuinit.text:secondary_start_kernel() The function __cpuexit cpu_die() references a function __cpuinit secondary_start_kernel(). This is often seen when error handling in the exit function uses functionality in the init path. The fix is often to remove the __cpuinit annotation of secondary_start_kernel() so it may be used outside an init section. Sam says: > The annotation of cpu_die() is wrong. > To be annotated __cpuexit the function shall: > - be used in exit context and only in exit context with HOTPLUG_CPU=n > - be used outside exit context with HOTPLUG_CPU=y So, this also means __cpu_disable(), __cpu_die() and twd_timer_stop() are also wrong. However, removing __cpuexit from cpu_die() creates: WARNING: vmlinux.o(.text+0x6834): Section mismatch in reference from the function cpu_die() to the function .cpuinit.text:secondary_start_kernel() The function cpu_die() references the function __cpuinit secondary_start_kernel(). This is often because cpu_die lacks a __cpuinit annotation or the annotation of secondary_start_kernel is wrong. so fix this using __ref. Signed-off-by: Russell King Acked-by: Sam Ravnborg --- arch/arm/kernel/smp.c | 6 +++--- arch/arm/kernel/smp_twd.c | 4 +++- 2 files changed, 6 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c index 9d015ee5747..57162af53dc 100644 --- a/arch/arm/kernel/smp.c +++ b/arch/arm/kernel/smp.c @@ -154,7 +154,7 @@ int __cpuinit __cpu_up(unsigned int cpu) /* * __cpu_disable runs on the processor to be shutdown. */ -int __cpuexit __cpu_disable(void) +int __cpu_disable(void) { unsigned int cpu = smp_processor_id(); struct task_struct *p; @@ -201,7 +201,7 @@ int __cpuexit __cpu_disable(void) * called on the thread which is asking for a CPU to be shutdown - * waits until shutdown has completed, or it is timed out. */ -void __cpuexit __cpu_die(unsigned int cpu) +void __cpu_die(unsigned int cpu) { if (!platform_cpu_kill(cpu)) printk("CPU%u: unable to kill\n", cpu); @@ -215,7 +215,7 @@ void __cpuexit __cpu_die(unsigned int cpu) * of the other hotplug-cpu capable cores, so presumably coming * out of idle fixes this. */ -void __cpuexit cpu_die(void) +void __ref cpu_die(void) { unsigned int cpu = smp_processor_id(); diff --git a/arch/arm/kernel/smp_twd.c b/arch/arm/kernel/smp_twd.c index d8c88c633c6..a73a34dccf2 100644 --- a/arch/arm/kernel/smp_twd.c +++ b/arch/arm/kernel/smp_twd.c @@ -166,10 +166,12 @@ void __cpuinit twd_timer_setup(struct clock_event_device *clk) clockevents_register_device(clk); } +#ifdef CONFIG_HOTPLUG_CPU /* * take a local timer down */ -void __cpuexit twd_timer_stop(void) +void twd_timer_stop(void) { __raw_writel(0, twd_base + TWD_TIMER_CONTROL); } +#endif -- cgit v1.2.3-70-g09d2 From aa45ee8fc0ee87c1711b5fe8eb3556d06530c39e Mon Sep 17 00:00:00 2001 From: Russell King Date: Mon, 28 Sep 2009 11:41:51 +0100 Subject: ARM: Ensure do_cache_op takes mmap_sem do_cache_op() uses find_vma() to validate its arguments without holding any locking. This means that the VMA could vanish beneath us. Fix this by taking a read lock on mmap_sem. Signed-off-by: Russell King --- arch/arm/kernel/traps.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c index 57eb0f6f600..467b69ed102 100644 --- a/arch/arm/kernel/traps.c +++ b/arch/arm/kernel/traps.c @@ -418,12 +418,14 @@ static int bad_syscall(int n, struct pt_regs *regs) static inline void do_cache_op(unsigned long start, unsigned long end, int flags) { + struct mm_struct *mm = current->active_mm; struct vm_area_struct *vma; if (end < start || flags) return; - vma = find_vma(current->active_mm, start); + down_read(&mm->mmap_sem); + vma = find_vma(mm, start); if (vma && vma->vm_start < end) { if (start < vma->vm_start) start = vma->vm_start; @@ -432,6 +434,7 @@ do_cache_op(unsigned long start, unsigned long end, int flags) flush_cache_user_range(vma, start, end); } + up_read(&mm->mmap_sem); } /* -- cgit v1.2.3-70-g09d2 From ee17962e249024ebba72acbfe7cf54f8ea5b72f8 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Mon, 28 Sep 2009 12:36:18 +0100 Subject: ARM: 5731/2: Fix U300 generic GPIO, remove ifdefs from MMCI v3 The #ifdefs in the MMCI driver were erroneous and just masking a bug in the U300 generic GPIO implementation. This removes the ifdefs and fixes the U300 generic GPIO instead. Signed-off-by: Linus Walleij Signed-off-by: Russell King --- arch/arm/mach-u300/gpio.c | 10 ++++++++++ arch/arm/mach-u300/include/mach/gpio.h | 1 + drivers/mmc/host/mmci.c | 2 -- 3 files changed, 11 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-u300/gpio.c b/arch/arm/mach-u300/gpio.c index 63c8f27fb15..0b35826b7d1 100644 --- a/arch/arm/mach-u300/gpio.c +++ b/arch/arm/mach-u300/gpio.c @@ -281,6 +281,16 @@ int gpio_unregister_callback(unsigned gpio) } EXPORT_SYMBOL(gpio_unregister_callback); +/* Non-zero means valid */ +int gpio_is_valid(int number) +{ + if (number >= 0 && + number < (U300_GPIO_NUM_PORTS * U300_GPIO_PINS_PER_PORT)) + return 1; + return 0; +} +EXPORT_SYMBOL(gpio_is_valid); + int gpio_request(unsigned gpio, const char *label) { if (gpio_pin[gpio].users) diff --git a/arch/arm/mach-u300/include/mach/gpio.h b/arch/arm/mach-u300/include/mach/gpio.h index c8174128d7e..7b1fc984abb 100644 --- a/arch/arm/mach-u300/include/mach/gpio.h +++ b/arch/arm/mach-u300/include/mach/gpio.h @@ -258,6 +258,7 @@ #define PIN_TO_PORT(val) (val >> 3) /* These can be found in arch/arm/mach-u300/gpio.c */ +extern int gpio_is_valid(int number); extern int gpio_request(unsigned gpio, const char *label); extern void gpio_free(unsigned gpio); extern int gpio_direction_input(unsigned gpio); diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c index 3d1e5329da1..705a5894a6b 100644 --- a/drivers/mmc/host/mmci.c +++ b/drivers/mmc/host/mmci.c @@ -678,7 +678,6 @@ static int __devinit mmci_probe(struct amba_device *dev, struct amba_id *id) writel(0, host->base + MMCIMASK1); writel(0xfff, host->base + MMCICLEAR); -#ifdef CONFIG_GPIOLIB if (gpio_is_valid(plat->gpio_cd)) { ret = gpio_request(plat->gpio_cd, DRIVER_NAME " (cd)"); if (ret == 0) @@ -697,7 +696,6 @@ static int __devinit mmci_probe(struct amba_device *dev, struct amba_id *id) else if (ret != -ENOSYS) goto err_gpio_wp; } -#endif ret = request_irq(dev->irq[0], mmci_irq, IRQF_SHARED, DRIVER_NAME " (cmd)", host); if (ret) -- cgit v1.2.3-70-g09d2 From 5950bd3897de70c8085f328287183c800424749a Mon Sep 17 00:00:00 2001 From: Leo Chen Date: Mon, 28 Sep 2009 21:41:46 +0100 Subject: ARM: 5732/1: remove redundant include file Remove duplicated #include('s) in arch/arm/mach-bcmring/core.c Signed-off-by: Huang Weiyi Signed-off-by: Leo Chen Signed-off-by: Russell King --- arch/arm/mach-bcmring/core.c | 1 - 1 file changed, 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-bcmring/core.c b/arch/arm/mach-bcmring/core.c index 492c649f451..d3bf29baa3a 100644 --- a/arch/arm/mach-bcmring/core.c +++ b/arch/arm/mach-bcmring/core.c @@ -31,7 +31,6 @@ #include #include -#include #include #include #include -- cgit v1.2.3-70-g09d2 From ca6cfa83463d1437895dc7e2e1b197e90dd07610 Mon Sep 17 00:00:00 2001 From: Leo Chen Date: Mon, 28 Sep 2009 21:56:19 +0100 Subject: ARM: 5733/1: fix bcmring compile error The movement of the MMCI header file made bcmring break. It turns out it was including asm/mmc.h without using it so fixing the problem boils down to removing the offending include. Signed-off-by: Linus Walleij Acked-by: Scott Branden Signed-off-by: Leo Hao Chen Signed-off-by: Russell King --- arch/arm/mach-bcmring/core.c | 1 - 1 file changed, 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-bcmring/core.c b/arch/arm/mach-bcmring/core.c index d3bf29baa3a..4b4f69251b3 100644 --- a/arch/arm/mach-bcmring/core.c +++ b/arch/arm/mach-bcmring/core.c @@ -44,7 +44,6 @@ #include #include #include -#include #include -- cgit v1.2.3-70-g09d2 From 6176d39471943a2e574782cbf62deded19b96aa0 Mon Sep 17 00:00:00 2001 From: Dmitry Artamonow Date: Tue, 29 Sep 2009 06:12:37 +0100 Subject: ARM: 5734/1: arm: fix compilation of entry-common.S for older CPUs MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Commit 181f817eaaca4c1f introduced some new code to entry-common.S Sadly, this new code uses 'bx' instruction which is available only on ARMv5 and higher CPUs. This causes following compilation errors when building kernel for StrongARM (ARMv4): arch/arm/kernel/entry-common.S: Assembler messages: arch/arm/kernel/entry-common.S:129: Error: selected processor does not support `bx ip' arch/arm/kernel/entry-common.S:138: Error: selected processor does not support `bx ip' Fix these errors by using 'mov pc' instead of 'bx'. Signed-off-by: Dmitry Artamonow Acked-by: Uwe Kleine-König Signed-off-by: Russell King --- arch/arm/kernel/entry-common.S | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/kernel/entry-common.S b/arch/arm/kernel/entry-common.S index 807cfebb0f4..825db52e558 100644 --- a/arch/arm/kernel/entry-common.S +++ b/arch/arm/kernel/entry-common.S @@ -126,7 +126,7 @@ ENTRY(__gnu_mcount_nc) cmp r0, r2 bne gnu_trace ldmia sp!, {r0-r3, ip, lr} - bx ip + mov pc, ip gnu_trace: ldr r1, [sp, #20] @ lr of instrumented routine @@ -135,7 +135,7 @@ gnu_trace: mov lr, pc mov pc, r2 ldmia sp!, {r0-r3, ip, lr} - bx ip + mov pc, ip ENTRY(mcount) stmdb sp!, {r0-r3, lr} -- cgit v1.2.3-70-g09d2 From 828c09509b9695271bcbdc53e9fc9a6a737148d2 Mon Sep 17 00:00:00 2001 From: Alexey Dobriyan Date: Thu, 1 Oct 2009 15:43:56 -0700 Subject: const: constify remaining file_operations [akpm@linux-foundation.org: fix KVM] Signed-off-by: Alexey Dobriyan Acked-by: Mike Frysinger Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/arm/mach-ns9xxx/clock.c | 2 +- arch/blackfin/mach-bf561/coreb.c | 2 +- arch/cris/arch-v10/drivers/sync_serial.c | 2 +- arch/cris/arch-v32/drivers/mach-fs/gpio.c | 2 +- arch/powerpc/kvm/timing.c | 2 +- arch/powerpc/platforms/cell/spufs/file.c | 2 +- arch/powerpc/platforms/pseries/dtl.c | 2 +- arch/x86/xen/debugfs.c | 2 +- drivers/acpi/video.c | 2 +- drivers/block/cciss.c | 2 +- drivers/char/apm-emulation.c | 2 +- drivers/char/bfin-otp.c | 2 +- drivers/char/xilinx_hwicap/xilinx_hwicap.c | 2 +- drivers/gpio/gpiolib.c | 2 +- drivers/hwmon/fschmd.c | 2 +- drivers/lguest/lguest_user.c | 2 +- drivers/media/dvb/dvb-core/dmxdev.c | 2 +- drivers/media/dvb/firewire/firedtv-ci.c | 2 +- drivers/misc/phantom.c | 2 +- drivers/misc/sgi-gru/grufile.c | 3 +-- drivers/mmc/core/debugfs.c | 2 +- drivers/s390/cio/qdio_debug.c | 2 +- drivers/s390/cio/qdio_perf.c | 2 +- drivers/scsi/sg.c | 43 +++++++++++++++++++++--------- drivers/spi/spidev.c | 2 +- drivers/usb/class/usbtmc.c | 2 +- drivers/usb/gadget/printer.c | 2 +- drivers/usb/host/whci/debug.c | 6 ++--- drivers/usb/misc/rio500.c | 3 +-- drivers/uwb/uwb-debug.c | 6 ++--- fs/btrfs/ctree.h | 2 +- fs/btrfs/file.c | 2 +- fs/btrfs/inode.c | 4 +-- fs/jbd2/journal.c | 2 +- fs/nfsd/nfsctl.c | 2 +- fs/nilfs2/dir.c | 2 +- fs/nilfs2/file.c | 2 +- fs/nilfs2/mdt.c | 2 +- fs/nilfs2/nilfs.h | 4 +-- fs/ocfs2/cluster/heartbeat.c | 2 +- fs/ocfs2/cluster/netdebug.c | 4 +-- fs/ocfs2/dlm/dlmdebug.c | 8 +++--- fs/ocfs2/super.c | 2 +- fs/omfs/dir.c | 2 +- fs/omfs/file.c | 2 +- fs/omfs/omfs.h | 4 +-- include/linux/cgroup.h | 2 +- include/linux/fs.h | 2 +- kernel/cgroup.c | 10 +++---- kernel/kprobes.c | 4 +-- kernel/rcutree_trace.c | 10 +++---- kernel/sched.c | 2 +- kernel/time/timer_list.c | 2 +- kernel/time/timer_stats.c | 2 +- samples/tracepoints/tracepoint-sample.c | 2 +- security/integrity/ima/ima_fs.c | 10 +++---- virt/kvm/kvm_main.c | 2 +- 57 files changed, 110 insertions(+), 95 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-ns9xxx/clock.c b/arch/arm/mach-ns9xxx/clock.c index 44ed20d4a38..cf81cbc5754 100644 --- a/arch/arm/mach-ns9xxx/clock.c +++ b/arch/arm/mach-ns9xxx/clock.c @@ -195,7 +195,7 @@ static int clk_debugfs_open(struct inode *inode, struct file *file) return single_open(file, clk_debugfs_show, NULL); } -static struct file_operations clk_debugfs_operations = { +static const struct file_operations clk_debugfs_operations = { .open = clk_debugfs_open, .read = seq_read, .llseek = seq_lseek, diff --git a/arch/blackfin/mach-bf561/coreb.c b/arch/blackfin/mach-bf561/coreb.c index 93635a766f9..1e60a92dd60 100644 --- a/arch/blackfin/mach-bf561/coreb.c +++ b/arch/blackfin/mach-bf561/coreb.c @@ -48,7 +48,7 @@ coreb_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned l return ret; } -static struct file_operations coreb_fops = { +static const struct file_operations coreb_fops = { .owner = THIS_MODULE, .ioctl = coreb_ioctl, }; diff --git a/arch/cris/arch-v10/drivers/sync_serial.c b/arch/cris/arch-v10/drivers/sync_serial.c index 6cc1a0319a5..562b9a7feae 100644 --- a/arch/cris/arch-v10/drivers/sync_serial.c +++ b/arch/cris/arch-v10/drivers/sync_serial.c @@ -244,7 +244,7 @@ static unsigned sync_serial_prescale_shadow; #define NUMBER_OF_PORTS 2 -static struct file_operations sync_serial_fops = { +static const struct file_operations sync_serial_fops = { .owner = THIS_MODULE, .write = sync_serial_write, .read = sync_serial_read, diff --git a/arch/cris/arch-v32/drivers/mach-fs/gpio.c b/arch/cris/arch-v32/drivers/mach-fs/gpio.c index fe1fde89388..d89ab80498e 100644 --- a/arch/cris/arch-v32/drivers/mach-fs/gpio.c +++ b/arch/cris/arch-v32/drivers/mach-fs/gpio.c @@ -855,7 +855,7 @@ gpio_leds_ioctl(unsigned int cmd, unsigned long arg) return 0; } -struct file_operations gpio_fops = { +static const struct file_operations gpio_fops = { .owner = THIS_MODULE, .poll = gpio_poll, .ioctl = gpio_ioctl, diff --git a/arch/powerpc/kvm/timing.c b/arch/powerpc/kvm/timing.c index 47ee603f558..2aa371e3007 100644 --- a/arch/powerpc/kvm/timing.c +++ b/arch/powerpc/kvm/timing.c @@ -201,7 +201,7 @@ static int kvmppc_exit_timing_open(struct inode *inode, struct file *file) return single_open(file, kvmppc_exit_timing_show, inode->i_private); } -static struct file_operations kvmppc_exit_timing_fops = { +static const struct file_operations kvmppc_exit_timing_fops = { .owner = THIS_MODULE, .open = kvmppc_exit_timing_open, .read = seq_read, diff --git a/arch/powerpc/platforms/cell/spufs/file.c b/arch/powerpc/platforms/cell/spufs/file.c index 96130944617..884e8bcec49 100644 --- a/arch/powerpc/platforms/cell/spufs/file.c +++ b/arch/powerpc/platforms/cell/spufs/file.c @@ -147,7 +147,7 @@ static int __fops ## _open(struct inode *inode, struct file *file) \ __simple_attr_check_format(__fmt, 0ull); \ return spufs_attr_open(inode, file, __get, __set, __fmt); \ } \ -static struct file_operations __fops = { \ +static const struct file_operations __fops = { \ .owner = THIS_MODULE, \ .open = __fops ## _open, \ .release = spufs_attr_release, \ diff --git a/arch/powerpc/platforms/pseries/dtl.c b/arch/powerpc/platforms/pseries/dtl.c index ab69925d579..937a544a236 100644 --- a/arch/powerpc/platforms/pseries/dtl.c +++ b/arch/powerpc/platforms/pseries/dtl.c @@ -209,7 +209,7 @@ static ssize_t dtl_file_read(struct file *filp, char __user *buf, size_t len, return n_read * sizeof(struct dtl_entry); } -static struct file_operations dtl_fops = { +static const struct file_operations dtl_fops = { .open = dtl_file_open, .release = dtl_file_release, .read = dtl_file_read, diff --git a/arch/x86/xen/debugfs.c b/arch/x86/xen/debugfs.c index b53225d2cac..e133ce25e29 100644 --- a/arch/x86/xen/debugfs.c +++ b/arch/x86/xen/debugfs.c @@ -100,7 +100,7 @@ static int xen_array_release(struct inode *inode, struct file *file) return 0; } -static struct file_operations u32_array_fops = { +static const struct file_operations u32_array_fops = { .owner = THIS_MODULE, .open = u32_array_open, .release= xen_array_release, diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c index a4fddb24476..f6e54bf8dd9 100644 --- a/drivers/acpi/video.c +++ b/drivers/acpi/video.c @@ -285,7 +285,7 @@ static int acpi_video_device_brightness_open_fs(struct inode *inode, struct file *file); static ssize_t acpi_video_device_write_brightness(struct file *file, const char __user *buffer, size_t count, loff_t *data); -static struct file_operations acpi_video_device_brightness_fops = { +static const struct file_operations acpi_video_device_brightness_fops = { .owner = THIS_MODULE, .open = acpi_video_device_brightness_open_fs, .read = seq_read, diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c index 24c3e21ab26..1ece0b47b58 100644 --- a/drivers/block/cciss.c +++ b/drivers/block/cciss.c @@ -426,7 +426,7 @@ out: return err; } -static struct file_operations cciss_proc_fops = { +static const struct file_operations cciss_proc_fops = { .owner = THIS_MODULE, .open = cciss_seq_open, .read = seq_read, diff --git a/drivers/char/apm-emulation.c b/drivers/char/apm-emulation.c index aaca40283be..4f568cb9af3 100644 --- a/drivers/char/apm-emulation.c +++ b/drivers/char/apm-emulation.c @@ -393,7 +393,7 @@ static int apm_open(struct inode * inode, struct file * filp) return as ? 0 : -ENOMEM; } -static struct file_operations apm_bios_fops = { +static const struct file_operations apm_bios_fops = { .owner = THIS_MODULE, .read = apm_read, .poll = apm_poll, diff --git a/drivers/char/bfin-otp.c b/drivers/char/bfin-otp.c index e3dd24bff51..836d4f0a876 100644 --- a/drivers/char/bfin-otp.c +++ b/drivers/char/bfin-otp.c @@ -217,7 +217,7 @@ static long bfin_otp_ioctl(struct file *filp, unsigned cmd, unsigned long arg) # define bfin_otp_ioctl NULL #endif -static struct file_operations bfin_otp_fops = { +static const struct file_operations bfin_otp_fops = { .owner = THIS_MODULE, .unlocked_ioctl = bfin_otp_ioctl, .read = bfin_otp_read, diff --git a/drivers/char/xilinx_hwicap/xilinx_hwicap.c b/drivers/char/xilinx_hwicap/xilinx_hwicap.c index f40ab699860..4846d50199f 100644 --- a/drivers/char/xilinx_hwicap/xilinx_hwicap.c +++ b/drivers/char/xilinx_hwicap/xilinx_hwicap.c @@ -559,7 +559,7 @@ static int hwicap_release(struct inode *inode, struct file *file) return status; } -static struct file_operations hwicap_fops = { +static const struct file_operations hwicap_fops = { .owner = THIS_MODULE, .write = hwicap_write, .read = hwicap_read, diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c index bb11a429394..662ed923d9e 100644 --- a/drivers/gpio/gpiolib.c +++ b/drivers/gpio/gpiolib.c @@ -1487,7 +1487,7 @@ static int gpiolib_open(struct inode *inode, struct file *file) return single_open(file, gpiolib_show, NULL); } -static struct file_operations gpiolib_operations = { +static const struct file_operations gpiolib_operations = { .open = gpiolib_open, .read = seq_read, .llseek = seq_lseek, diff --git a/drivers/hwmon/fschmd.c b/drivers/hwmon/fschmd.c index ea955edde87..2a7a85a6dc3 100644 --- a/drivers/hwmon/fschmd.c +++ b/drivers/hwmon/fschmd.c @@ -915,7 +915,7 @@ static int watchdog_ioctl(struct inode *inode, struct file *filp, return ret; } -static struct file_operations watchdog_fops = { +static const struct file_operations watchdog_fops = { .owner = THIS_MODULE, .llseek = no_llseek, .open = watchdog_open, diff --git a/drivers/lguest/lguest_user.c b/drivers/lguest/lguest_user.c index b4d3f7ca554..bd1632388e4 100644 --- a/drivers/lguest/lguest_user.c +++ b/drivers/lguest/lguest_user.c @@ -508,7 +508,7 @@ static int close(struct inode *inode, struct file *file) * uses: reading and writing a character device called /dev/lguest. All the * work happens in the read(), write() and close() routines: */ -static struct file_operations lguest_fops = { +static const struct file_operations lguest_fops = { .owner = THIS_MODULE, .release = close, .write = write, diff --git a/drivers/media/dvb/dvb-core/dmxdev.c b/drivers/media/dvb/dvb-core/dmxdev.c index 3750ff48cba..51641498359 100644 --- a/drivers/media/dvb/dvb-core/dmxdev.c +++ b/drivers/media/dvb/dvb-core/dmxdev.c @@ -1203,7 +1203,7 @@ static unsigned int dvb_dvr_poll(struct file *file, poll_table *wait) return mask; } -static struct file_operations dvb_dvr_fops = { +static const struct file_operations dvb_dvr_fops = { .owner = THIS_MODULE, .read = dvb_dvr_read, .write = dvb_dvr_write, diff --git a/drivers/media/dvb/firewire/firedtv-ci.c b/drivers/media/dvb/firewire/firedtv-ci.c index eeb80d0ea3f..853e04b7cb3 100644 --- a/drivers/media/dvb/firewire/firedtv-ci.c +++ b/drivers/media/dvb/firewire/firedtv-ci.c @@ -215,7 +215,7 @@ static unsigned int fdtv_ca_io_poll(struct file *file, poll_table *wait) return POLLIN; } -static struct file_operations fdtv_ca_fops = { +static const struct file_operations fdtv_ca_fops = { .owner = THIS_MODULE, .ioctl = dvb_generic_ioctl, .open = dvb_generic_open, diff --git a/drivers/misc/phantom.c b/drivers/misc/phantom.c index fa57b67593a..90a95ce8dc3 100644 --- a/drivers/misc/phantom.c +++ b/drivers/misc/phantom.c @@ -271,7 +271,7 @@ static unsigned int phantom_poll(struct file *file, poll_table *wait) return mask; } -static struct file_operations phantom_file_ops = { +static const struct file_operations phantom_file_ops = { .open = phantom_open, .release = phantom_release, .unlocked_ioctl = phantom_ioctl, diff --git a/drivers/misc/sgi-gru/grufile.c b/drivers/misc/sgi-gru/grufile.c index 300e7ba391a..41c8fe2a928 100644 --- a/drivers/misc/sgi-gru/grufile.c +++ b/drivers/misc/sgi-gru/grufile.c @@ -53,7 +53,6 @@ struct gru_stats_s gru_stats; /* Guaranteed user available resources on each node */ static int max_user_cbrs, max_user_dsr_bytes; -static struct file_operations gru_fops; static struct miscdevice gru_miscdev; @@ -426,7 +425,7 @@ static void __exit gru_exit(void) gru_proc_exit(); } -static struct file_operations gru_fops = { +static const struct file_operations gru_fops = { .owner = THIS_MODULE, .unlocked_ioctl = gru_file_unlocked_ioctl, .mmap = gru_file_mmap, diff --git a/drivers/mmc/core/debugfs.c b/drivers/mmc/core/debugfs.c index 610dbd1fcc8..96d10f40fb2 100644 --- a/drivers/mmc/core/debugfs.c +++ b/drivers/mmc/core/debugfs.c @@ -240,7 +240,7 @@ static int mmc_ext_csd_release(struct inode *inode, struct file *file) return 0; } -static struct file_operations mmc_dbg_ext_csd_fops = { +static const struct file_operations mmc_dbg_ext_csd_fops = { .open = mmc_ext_csd_open, .read = mmc_ext_csd_read, .release = mmc_ext_csd_release, diff --git a/drivers/s390/cio/qdio_debug.c b/drivers/s390/cio/qdio_debug.c index 1b78f639ead..76769978285 100644 --- a/drivers/s390/cio/qdio_debug.c +++ b/drivers/s390/cio/qdio_debug.c @@ -125,7 +125,7 @@ static int qstat_seq_open(struct inode *inode, struct file *filp) filp->f_path.dentry->d_inode->i_private); } -static struct file_operations debugfs_fops = { +static const struct file_operations debugfs_fops = { .owner = THIS_MODULE, .open = qstat_seq_open, .read = seq_read, diff --git a/drivers/s390/cio/qdio_perf.c b/drivers/s390/cio/qdio_perf.c index eff943923c6..968e3c7c263 100644 --- a/drivers/s390/cio/qdio_perf.c +++ b/drivers/s390/cio/qdio_perf.c @@ -84,7 +84,7 @@ static int qdio_perf_seq_open(struct inode *inode, struct file *filp) return single_open(filp, qdio_perf_proc_show, NULL); } -static struct file_operations qdio_perf_proc_fops = { +static const struct file_operations qdio_perf_proc_fops = { .owner = THIS_MODULE, .open = qdio_perf_seq_open, .read = seq_read, diff --git a/drivers/scsi/sg.c b/drivers/scsi/sg.c index 0cb049f5cc5..747a5e5c127 100644 --- a/drivers/scsi/sg.c +++ b/drivers/scsi/sg.c @@ -1317,7 +1317,7 @@ static void sg_rq_end_io(struct request *rq, int uptodate) } } -static struct file_operations sg_fops = { +static const struct file_operations sg_fops = { .owner = THIS_MODULE, .read = sg_read, .write = sg_write, @@ -2194,9 +2194,11 @@ static int sg_proc_seq_show_int(struct seq_file *s, void *v); static int sg_proc_single_open_adio(struct inode *inode, struct file *file); static ssize_t sg_proc_write_adio(struct file *filp, const char __user *buffer, size_t count, loff_t *off); -static struct file_operations adio_fops = { - /* .owner, .read and .llseek added in sg_proc_init() */ +static const struct file_operations adio_fops = { + .owner = THIS_MODULE, .open = sg_proc_single_open_adio, + .read = seq_read, + .llseek = seq_lseek, .write = sg_proc_write_adio, .release = single_release, }; @@ -2204,23 +2206,32 @@ static struct file_operations adio_fops = { static int sg_proc_single_open_dressz(struct inode *inode, struct file *file); static ssize_t sg_proc_write_dressz(struct file *filp, const char __user *buffer, size_t count, loff_t *off); -static struct file_operations dressz_fops = { +static const struct file_operations dressz_fops = { + .owner = THIS_MODULE, .open = sg_proc_single_open_dressz, + .read = seq_read, + .llseek = seq_lseek, .write = sg_proc_write_dressz, .release = single_release, }; static int sg_proc_seq_show_version(struct seq_file *s, void *v); static int sg_proc_single_open_version(struct inode *inode, struct file *file); -static struct file_operations version_fops = { +static const struct file_operations version_fops = { + .owner = THIS_MODULE, .open = sg_proc_single_open_version, + .read = seq_read, + .llseek = seq_lseek, .release = single_release, }; static int sg_proc_seq_show_devhdr(struct seq_file *s, void *v); static int sg_proc_single_open_devhdr(struct inode *inode, struct file *file); -static struct file_operations devhdr_fops = { +static const struct file_operations devhdr_fops = { + .owner = THIS_MODULE, .open = sg_proc_single_open_devhdr, + .read = seq_read, + .llseek = seq_lseek, .release = single_release, }; @@ -2229,8 +2240,11 @@ static int sg_proc_open_dev(struct inode *inode, struct file *file); static void * dev_seq_start(struct seq_file *s, loff_t *pos); static void * dev_seq_next(struct seq_file *s, void *v, loff_t *pos); static void dev_seq_stop(struct seq_file *s, void *v); -static struct file_operations dev_fops = { +static const struct file_operations dev_fops = { + .owner = THIS_MODULE, .open = sg_proc_open_dev, + .read = seq_read, + .llseek = seq_lseek, .release = seq_release, }; static const struct seq_operations dev_seq_ops = { @@ -2242,8 +2256,11 @@ static const struct seq_operations dev_seq_ops = { static int sg_proc_seq_show_devstrs(struct seq_file *s, void *v); static int sg_proc_open_devstrs(struct inode *inode, struct file *file); -static struct file_operations devstrs_fops = { +static const struct file_operations devstrs_fops = { + .owner = THIS_MODULE, .open = sg_proc_open_devstrs, + .read = seq_read, + .llseek = seq_lseek, .release = seq_release, }; static const struct seq_operations devstrs_seq_ops = { @@ -2255,8 +2272,11 @@ static const struct seq_operations devstrs_seq_ops = { static int sg_proc_seq_show_debug(struct seq_file *s, void *v); static int sg_proc_open_debug(struct inode *inode, struct file *file); -static struct file_operations debug_fops = { +static const struct file_operations debug_fops = { + .owner = THIS_MODULE, .open = sg_proc_open_debug, + .read = seq_read, + .llseek = seq_lseek, .release = seq_release, }; static const struct seq_operations debug_seq_ops = { @@ -2269,7 +2289,7 @@ static const struct seq_operations debug_seq_ops = { struct sg_proc_leaf { const char * name; - struct file_operations * fops; + const struct file_operations * fops; }; static struct sg_proc_leaf sg_proc_leaf_arr[] = { @@ -2295,9 +2315,6 @@ sg_proc_init(void) for (k = 0; k < num_leaves; ++k) { leaf = &sg_proc_leaf_arr[k]; mask = leaf->fops->write ? S_IRUGO | S_IWUSR : S_IRUGO; - leaf->fops->owner = THIS_MODULE; - leaf->fops->read = seq_read; - leaf->fops->llseek = seq_lseek; proc_create(leaf->name, mask, sg_proc_sgp, leaf->fops); } return 0; diff --git a/drivers/spi/spidev.c b/drivers/spi/spidev.c index f921bd1109e..5d23983f02f 100644 --- a/drivers/spi/spidev.c +++ b/drivers/spi/spidev.c @@ -537,7 +537,7 @@ static int spidev_release(struct inode *inode, struct file *filp) return status; } -static struct file_operations spidev_fops = { +static const struct file_operations spidev_fops = { .owner = THIS_MODULE, /* REVISIT switch to aio primitives, so that userspace * gets more complete API coverage. It'll simplify things diff --git a/drivers/usb/class/usbtmc.c b/drivers/usb/class/usbtmc.c index 333ee02e7b2..864f0ba6a34 100644 --- a/drivers/usb/class/usbtmc.c +++ b/drivers/usb/class/usbtmc.c @@ -993,7 +993,7 @@ skip_io_on_zombie: return retval; } -static struct file_operations fops = { +static const struct file_operations fops = { .owner = THIS_MODULE, .read = usbtmc_read, .write = usbtmc_write, diff --git a/drivers/usb/gadget/printer.c b/drivers/usb/gadget/printer.c index 29500154d00..2d867fd2241 100644 --- a/drivers/usb/gadget/printer.c +++ b/drivers/usb/gadget/printer.c @@ -875,7 +875,7 @@ printer_ioctl(struct file *fd, unsigned int code, unsigned long arg) } /* used after endpoint configuration */ -static struct file_operations printer_io_operations = { +static const struct file_operations printer_io_operations = { .owner = THIS_MODULE, .open = printer_open, .read = printer_read, diff --git a/drivers/usb/host/whci/debug.c b/drivers/usb/host/whci/debug.c index cf2d45946c5..2273c815941 100644 --- a/drivers/usb/host/whci/debug.c +++ b/drivers/usb/host/whci/debug.c @@ -134,7 +134,7 @@ static int pzl_open(struct inode *inode, struct file *file) return single_open(file, pzl_print, inode->i_private); } -static struct file_operations di_fops = { +static const struct file_operations di_fops = { .open = di_open, .read = seq_read, .llseek = seq_lseek, @@ -142,7 +142,7 @@ static struct file_operations di_fops = { .owner = THIS_MODULE, }; -static struct file_operations asl_fops = { +static const struct file_operations asl_fops = { .open = asl_open, .read = seq_read, .llseek = seq_lseek, @@ -150,7 +150,7 @@ static struct file_operations asl_fops = { .owner = THIS_MODULE, }; -static struct file_operations pzl_fops = { +static const struct file_operations pzl_fops = { .open = pzl_open, .read = seq_read, .llseek = seq_lseek, diff --git a/drivers/usb/misc/rio500.c b/drivers/usb/misc/rio500.c index d645f3899fe..32d0199d0c3 100644 --- a/drivers/usb/misc/rio500.c +++ b/drivers/usb/misc/rio500.c @@ -429,8 +429,7 @@ read_rio(struct file *file, char __user *buffer, size_t count, loff_t * ppos) return read_count; } -static struct -file_operations usb_rio_fops = { +static const struct file_operations usb_rio_fops = { .owner = THIS_MODULE, .read = read_rio, .write = write_rio, diff --git a/drivers/uwb/uwb-debug.c b/drivers/uwb/uwb-debug.c index 4a42993700c..2eecec0c13c 100644 --- a/drivers/uwb/uwb-debug.c +++ b/drivers/uwb/uwb-debug.c @@ -205,7 +205,7 @@ static ssize_t command_write(struct file *file, const char __user *buf, return ret < 0 ? ret : len; } -static struct file_operations command_fops = { +static const struct file_operations command_fops = { .open = command_open, .write = command_write, .read = NULL, @@ -255,7 +255,7 @@ static int reservations_open(struct inode *inode, struct file *file) return single_open(file, reservations_print, inode->i_private); } -static struct file_operations reservations_fops = { +static const struct file_operations reservations_fops = { .open = reservations_open, .read = seq_read, .llseek = seq_lseek, @@ -283,7 +283,7 @@ static int drp_avail_open(struct inode *inode, struct file *file) return single_open(file, drp_avail_print, inode->i_private); } -static struct file_operations drp_avail_fops = { +static const struct file_operations drp_avail_fops = { .open = drp_avail_open, .read = seq_read, .llseek = seq_lseek, diff --git a/fs/btrfs/ctree.h b/fs/btrfs/ctree.h index 80599b4e42b..4484eb3408a 100644 --- a/fs/btrfs/ctree.h +++ b/fs/btrfs/ctree.h @@ -2326,7 +2326,7 @@ int btrfs_sync_file(struct file *file, struct dentry *dentry, int datasync); int btrfs_drop_extent_cache(struct inode *inode, u64 start, u64 end, int skip_pinned); int btrfs_check_file(struct btrfs_root *root, struct inode *inode); -extern struct file_operations btrfs_file_operations; +extern const struct file_operations btrfs_file_operations; int btrfs_drop_extents(struct btrfs_trans_handle *trans, struct btrfs_root *root, struct inode *inode, u64 start, u64 end, u64 locked_end, diff --git a/fs/btrfs/file.c b/fs/btrfs/file.c index a3492a3ad96..9ed17dbe5c6 100644 --- a/fs/btrfs/file.c +++ b/fs/btrfs/file.c @@ -1196,7 +1196,7 @@ static int btrfs_file_mmap(struct file *filp, struct vm_area_struct *vma) return 0; } -struct file_operations btrfs_file_operations = { +const struct file_operations btrfs_file_operations = { .llseek = generic_file_llseek, .read = do_sync_read, .aio_read = generic_file_aio_read, diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c index e9b76bcd1c1..b9fe06d751c 100644 --- a/fs/btrfs/inode.c +++ b/fs/btrfs/inode.c @@ -62,7 +62,7 @@ static const struct inode_operations btrfs_special_inode_operations; static const struct inode_operations btrfs_file_inode_operations; static const struct address_space_operations btrfs_aops; static const struct address_space_operations btrfs_symlink_aops; -static struct file_operations btrfs_dir_file_operations; +static const struct file_operations btrfs_dir_file_operations; static struct extent_io_ops btrfs_extent_io_ops; static struct kmem_cache *btrfs_inode_cachep; @@ -5544,7 +5544,7 @@ static const struct inode_operations btrfs_dir_ro_inode_operations = { .permission = btrfs_permission, }; -static struct file_operations btrfs_dir_file_operations = { +static const struct file_operations btrfs_dir_file_operations = { .llseek = generic_file_llseek, .read = generic_read_dir, .readdir = btrfs_real_readdir, diff --git a/fs/jbd2/journal.c b/fs/jbd2/journal.c index 761af77491f..b0ab5219bec 100644 --- a/fs/jbd2/journal.c +++ b/fs/jbd2/journal.c @@ -770,7 +770,7 @@ static int jbd2_seq_info_release(struct inode *inode, struct file *file) return seq_release(inode, file); } -static struct file_operations jbd2_seq_info_fops = { +static const struct file_operations jbd2_seq_info_fops = { .owner = THIS_MODULE, .open = jbd2_seq_info_open, .read = seq_read, diff --git a/fs/nfsd/nfsctl.c b/fs/nfsd/nfsctl.c index 00388d2a3c9..5c01fc148ce 100644 --- a/fs/nfsd/nfsctl.c +++ b/fs/nfsd/nfsctl.c @@ -176,7 +176,7 @@ static const struct file_operations exports_operations = { extern int nfsd_pool_stats_open(struct inode *inode, struct file *file); extern int nfsd_pool_stats_release(struct inode *inode, struct file *file); -static struct file_operations pool_stats_operations = { +static const struct file_operations pool_stats_operations = { .open = nfsd_pool_stats_open, .read = seq_read, .llseek = seq_lseek, diff --git a/fs/nilfs2/dir.c b/fs/nilfs2/dir.c index 1a4fa04cf07..e097099bfc8 100644 --- a/fs/nilfs2/dir.c +++ b/fs/nilfs2/dir.c @@ -697,7 +697,7 @@ not_empty: return 0; } -struct file_operations nilfs_dir_operations = { +const struct file_operations nilfs_dir_operations = { .llseek = generic_file_llseek, .read = generic_read_dir, .readdir = nilfs_readdir, diff --git a/fs/nilfs2/file.c b/fs/nilfs2/file.c index 7d7b4983dee..30292df443c 100644 --- a/fs/nilfs2/file.c +++ b/fs/nilfs2/file.c @@ -134,7 +134,7 @@ static int nilfs_file_mmap(struct file *file, struct vm_area_struct *vma) * We have mostly NULL's here: the current defaults are ok for * the nilfs filesystem. */ -struct file_operations nilfs_file_operations = { +const struct file_operations nilfs_file_operations = { .llseek = generic_file_llseek, .read = do_sync_read, .write = do_sync_write, diff --git a/fs/nilfs2/mdt.c b/fs/nilfs2/mdt.c index b18c4998f8d..f6326112d64 100644 --- a/fs/nilfs2/mdt.c +++ b/fs/nilfs2/mdt.c @@ -433,7 +433,7 @@ static const struct address_space_operations def_mdt_aops = { }; static const struct inode_operations def_mdt_iops; -static struct file_operations def_mdt_fops; +static const struct file_operations def_mdt_fops; /* * NILFS2 uses pseudo inodes for meta data files such as DAT, cpfile, sufile, diff --git a/fs/nilfs2/nilfs.h b/fs/nilfs2/nilfs.h index bad7368782d..4da6f67e9a9 100644 --- a/fs/nilfs2/nilfs.h +++ b/fs/nilfs2/nilfs.h @@ -294,9 +294,9 @@ void nilfs_clear_gcdat_inode(struct the_nilfs *); /* * Inodes and files operations */ -extern struct file_operations nilfs_dir_operations; +extern const struct file_operations nilfs_dir_operations; extern const struct inode_operations nilfs_file_inode_operations; -extern struct file_operations nilfs_file_operations; +extern const struct file_operations nilfs_file_operations; extern const struct address_space_operations nilfs_aops; extern const struct inode_operations nilfs_dir_inode_operations; extern const struct inode_operations nilfs_special_inode_operations; diff --git a/fs/ocfs2/cluster/heartbeat.c b/fs/ocfs2/cluster/heartbeat.c index 09cc25d0461..c452d116b89 100644 --- a/fs/ocfs2/cluster/heartbeat.c +++ b/fs/ocfs2/cluster/heartbeat.c @@ -966,7 +966,7 @@ static ssize_t o2hb_debug_read(struct file *file, char __user *buf, } #endif /* CONFIG_DEBUG_FS */ -static struct file_operations o2hb_debug_fops = { +static const struct file_operations o2hb_debug_fops = { .open = o2hb_debug_open, .release = o2hb_debug_release, .read = o2hb_debug_read, diff --git a/fs/ocfs2/cluster/netdebug.c b/fs/ocfs2/cluster/netdebug.c index cfb2be708ab..da794bc07a6 100644 --- a/fs/ocfs2/cluster/netdebug.c +++ b/fs/ocfs2/cluster/netdebug.c @@ -207,7 +207,7 @@ static int nst_fop_release(struct inode *inode, struct file *file) return seq_release_private(inode, file); } -static struct file_operations nst_seq_fops = { +static const struct file_operations nst_seq_fops = { .open = nst_fop_open, .read = seq_read, .llseek = seq_lseek, @@ -388,7 +388,7 @@ static int sc_fop_release(struct inode *inode, struct file *file) return seq_release_private(inode, file); } -static struct file_operations sc_seq_fops = { +static const struct file_operations sc_seq_fops = { .open = sc_fop_open, .read = seq_read, .llseek = seq_lseek, diff --git a/fs/ocfs2/dlm/dlmdebug.c b/fs/ocfs2/dlm/dlmdebug.c index ca46002ec10..42b0bad7a61 100644 --- a/fs/ocfs2/dlm/dlmdebug.c +++ b/fs/ocfs2/dlm/dlmdebug.c @@ -478,7 +478,7 @@ bail: return -ENOMEM; } -static struct file_operations debug_purgelist_fops = { +static const struct file_operations debug_purgelist_fops = { .open = debug_purgelist_open, .release = debug_buffer_release, .read = debug_buffer_read, @@ -538,7 +538,7 @@ bail: return -ENOMEM; } -static struct file_operations debug_mle_fops = { +static const struct file_operations debug_mle_fops = { .open = debug_mle_open, .release = debug_buffer_release, .read = debug_buffer_read, @@ -741,7 +741,7 @@ static int debug_lockres_release(struct inode *inode, struct file *file) return seq_release_private(inode, file); } -static struct file_operations debug_lockres_fops = { +static const struct file_operations debug_lockres_fops = { .open = debug_lockres_open, .release = debug_lockres_release, .read = seq_read, @@ -925,7 +925,7 @@ bail: return -ENOMEM; } -static struct file_operations debug_state_fops = { +static const struct file_operations debug_state_fops = { .open = debug_state_open, .release = debug_buffer_release, .read = debug_buffer_read, diff --git a/fs/ocfs2/super.c b/fs/ocfs2/super.c index 4cc3c890a2c..c0e48aeebb1 100644 --- a/fs/ocfs2/super.c +++ b/fs/ocfs2/super.c @@ -373,7 +373,7 @@ static ssize_t ocfs2_debug_read(struct file *file, char __user *buf, } #endif /* CONFIG_DEBUG_FS */ -static struct file_operations ocfs2_osb_debug_fops = { +static const struct file_operations ocfs2_osb_debug_fops = { .open = ocfs2_osb_debug_open, .release = ocfs2_debug_release, .read = ocfs2_debug_read, diff --git a/fs/omfs/dir.c b/fs/omfs/dir.c index 3680bae335b..b42d6241903 100644 --- a/fs/omfs/dir.c +++ b/fs/omfs/dir.c @@ -498,7 +498,7 @@ const struct inode_operations omfs_dir_inops = { .rmdir = omfs_rmdir, }; -struct file_operations omfs_dir_operations = { +const struct file_operations omfs_dir_operations = { .read = generic_read_dir, .readdir = omfs_readdir, .llseek = generic_file_llseek, diff --git a/fs/omfs/file.c b/fs/omfs/file.c index 4845fbb18e6..399487c0936 100644 --- a/fs/omfs/file.c +++ b/fs/omfs/file.c @@ -322,7 +322,7 @@ static sector_t omfs_bmap(struct address_space *mapping, sector_t block) return generic_block_bmap(mapping, block, omfs_get_block); } -struct file_operations omfs_file_operations = { +const struct file_operations omfs_file_operations = { .llseek = generic_file_llseek, .read = do_sync_read, .write = do_sync_write, diff --git a/fs/omfs/omfs.h b/fs/omfs/omfs.h index df71039945a..ebe2fdbe535 100644 --- a/fs/omfs/omfs.h +++ b/fs/omfs/omfs.h @@ -44,14 +44,14 @@ extern int omfs_allocate_range(struct super_block *sb, int min_request, extern int omfs_clear_range(struct super_block *sb, u64 block, int count); /* dir.c */ -extern struct file_operations omfs_dir_operations; +extern const struct file_operations omfs_dir_operations; extern const struct inode_operations omfs_dir_inops; extern int omfs_make_empty(struct inode *inode, struct super_block *sb); extern int omfs_is_bad(struct omfs_sb_info *sbi, struct omfs_header *header, u64 fsblock); /* file.c */ -extern struct file_operations omfs_file_operations; +extern const struct file_operations omfs_file_operations; extern const struct inode_operations omfs_file_inops; extern const struct address_space_operations omfs_aops; extern void omfs_make_empty_table(struct buffer_head *bh, int offset); diff --git a/include/linux/cgroup.h b/include/linux/cgroup.h index b62bb9294d0..0008dee6651 100644 --- a/include/linux/cgroup.h +++ b/include/linux/cgroup.h @@ -37,7 +37,7 @@ extern void cgroup_exit(struct task_struct *p, int run_callbacks); extern int cgroupstats_build(struct cgroupstats *stats, struct dentry *dentry); -extern struct file_operations proc_cgroup_operations; +extern const struct file_operations proc_cgroup_operations; /* Define the enumeration of all cgroup subsystems */ #define SUBSYS(_x) _x ## _subsys_id, diff --git a/include/linux/fs.h b/include/linux/fs.h index 2adaa2529f1..a1e6899d4b6 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -2446,7 +2446,7 @@ static int __fops ## _open(struct inode *inode, struct file *file) \ __simple_attr_check_format(__fmt, 0ull); \ return simple_attr_open(inode, file, __get, __set, __fmt); \ } \ -static struct file_operations __fops = { \ +static const struct file_operations __fops = { \ .owner = THIS_MODULE, \ .open = __fops ## _open, \ .release = simple_attr_release, \ diff --git a/kernel/cgroup.c b/kernel/cgroup.c index 7ccba4bc5e3..d2b88596efd 100644 --- a/kernel/cgroup.c +++ b/kernel/cgroup.c @@ -703,7 +703,7 @@ static int cgroup_mkdir(struct inode *dir, struct dentry *dentry, int mode); static int cgroup_rmdir(struct inode *unused_dir, struct dentry *dentry); static int cgroup_populate_dir(struct cgroup *cgrp); static const struct inode_operations cgroup_dir_inode_operations; -static struct file_operations proc_cgroupstats_operations; +static const struct file_operations proc_cgroupstats_operations; static struct backing_dev_info cgroup_backing_dev_info = { .name = "cgroup", @@ -1863,7 +1863,7 @@ static int cgroup_seqfile_release(struct inode *inode, struct file *file) return single_release(inode, file); } -static struct file_operations cgroup_seqfile_operations = { +static const struct file_operations cgroup_seqfile_operations = { .read = seq_read, .write = cgroup_file_write, .llseek = seq_lseek, @@ -1922,7 +1922,7 @@ static int cgroup_rename(struct inode *old_dir, struct dentry *old_dentry, return simple_rename(old_dir, old_dentry, new_dir, new_dentry); } -static struct file_operations cgroup_file_operations = { +static const struct file_operations cgroup_file_operations = { .read = cgroup_file_read, .write = cgroup_file_write, .llseek = generic_file_llseek, @@ -3369,7 +3369,7 @@ static int cgroup_open(struct inode *inode, struct file *file) return single_open(file, proc_cgroup_show, pid); } -struct file_operations proc_cgroup_operations = { +const struct file_operations proc_cgroup_operations = { .open = cgroup_open, .read = seq_read, .llseek = seq_lseek, @@ -3398,7 +3398,7 @@ static int cgroupstats_open(struct inode *inode, struct file *file) return single_open(file, proc_cgroupstats_show, NULL); } -static struct file_operations proc_cgroupstats_operations = { +static const struct file_operations proc_cgroupstats_operations = { .open = cgroupstats_open, .read = seq_read, .llseek = seq_lseek, diff --git a/kernel/kprobes.c b/kernel/kprobes.c index cfadc1291d0..5240d75f4c6 100644 --- a/kernel/kprobes.c +++ b/kernel/kprobes.c @@ -1333,7 +1333,7 @@ static int __kprobes kprobes_open(struct inode *inode, struct file *filp) return seq_open(filp, &kprobes_seq_ops); } -static struct file_operations debugfs_kprobes_operations = { +static const struct file_operations debugfs_kprobes_operations = { .open = kprobes_open, .read = seq_read, .llseek = seq_lseek, @@ -1515,7 +1515,7 @@ static ssize_t write_enabled_file_bool(struct file *file, return count; } -static struct file_operations fops_kp = { +static const struct file_operations fops_kp = { .read = read_enabled_file_bool, .write = write_enabled_file_bool, }; diff --git a/kernel/rcutree_trace.c b/kernel/rcutree_trace.c index c89f5e9fd17..179e6ad80dc 100644 --- a/kernel/rcutree_trace.c +++ b/kernel/rcutree_trace.c @@ -93,7 +93,7 @@ static int rcudata_open(struct inode *inode, struct file *file) return single_open(file, show_rcudata, NULL); } -static struct file_operations rcudata_fops = { +static const struct file_operations rcudata_fops = { .owner = THIS_MODULE, .open = rcudata_open, .read = seq_read, @@ -145,7 +145,7 @@ static int rcudata_csv_open(struct inode *inode, struct file *file) return single_open(file, show_rcudata_csv, NULL); } -static struct file_operations rcudata_csv_fops = { +static const struct file_operations rcudata_csv_fops = { .owner = THIS_MODULE, .open = rcudata_csv_open, .read = seq_read, @@ -196,7 +196,7 @@ static int rcuhier_open(struct inode *inode, struct file *file) return single_open(file, show_rcuhier, NULL); } -static struct file_operations rcuhier_fops = { +static const struct file_operations rcuhier_fops = { .owner = THIS_MODULE, .open = rcuhier_open, .read = seq_read, @@ -222,7 +222,7 @@ static int rcugp_open(struct inode *inode, struct file *file) return single_open(file, show_rcugp, NULL); } -static struct file_operations rcugp_fops = { +static const struct file_operations rcugp_fops = { .owner = THIS_MODULE, .open = rcugp_open, .read = seq_read, @@ -276,7 +276,7 @@ static int rcu_pending_open(struct inode *inode, struct file *file) return single_open(file, show_rcu_pending, NULL); } -static struct file_operations rcu_pending_fops = { +static const struct file_operations rcu_pending_fops = { .owner = THIS_MODULE, .open = rcu_pending_open, .read = seq_read, diff --git a/kernel/sched.c b/kernel/sched.c index ee61f454a98..1535f3884b8 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -780,7 +780,7 @@ static int sched_feat_open(struct inode *inode, struct file *filp) return single_open(filp, sched_feat_show, NULL); } -static struct file_operations sched_feat_fops = { +static const struct file_operations sched_feat_fops = { .open = sched_feat_open, .write = sched_feat_write, .read = seq_read, diff --git a/kernel/time/timer_list.c b/kernel/time/timer_list.c index fddd69d16e0..1b5b7aa2fdf 100644 --- a/kernel/time/timer_list.c +++ b/kernel/time/timer_list.c @@ -275,7 +275,7 @@ static int timer_list_open(struct inode *inode, struct file *filp) return single_open(filp, timer_list_show, NULL); } -static struct file_operations timer_list_fops = { +static const struct file_operations timer_list_fops = { .open = timer_list_open, .read = seq_read, .llseek = seq_lseek, diff --git a/kernel/time/timer_stats.c b/kernel/time/timer_stats.c index 4cde8b9c716..ee5681f8d7e 100644 --- a/kernel/time/timer_stats.c +++ b/kernel/time/timer_stats.c @@ -395,7 +395,7 @@ static int tstats_open(struct inode *inode, struct file *filp) return single_open(filp, tstats_show, NULL); } -static struct file_operations tstats_fops = { +static const struct file_operations tstats_fops = { .open = tstats_open, .read = seq_read, .write = tstats_write, diff --git a/samples/tracepoints/tracepoint-sample.c b/samples/tracepoints/tracepoint-sample.c index 9cf80a11e8b..26fab33ffa8 100644 --- a/samples/tracepoints/tracepoint-sample.c +++ b/samples/tracepoints/tracepoint-sample.c @@ -28,7 +28,7 @@ static int my_open(struct inode *inode, struct file *file) return -EPERM; } -static struct file_operations mark_ops = { +static const struct file_operations mark_ops = { .open = my_open, }; diff --git a/security/integrity/ima/ima_fs.c b/security/integrity/ima/ima_fs.c index 8e9777b7640..0c72c9c3895 100644 --- a/security/integrity/ima/ima_fs.c +++ b/security/integrity/ima/ima_fs.c @@ -43,7 +43,7 @@ static ssize_t ima_show_htable_violations(struct file *filp, return ima_show_htable_value(buf, count, ppos, &ima_htable.violations); } -static struct file_operations ima_htable_violations_ops = { +static const struct file_operations ima_htable_violations_ops = { .read = ima_show_htable_violations }; @@ -55,7 +55,7 @@ static ssize_t ima_show_measurements_count(struct file *filp, } -static struct file_operations ima_measurements_count_ops = { +static const struct file_operations ima_measurements_count_ops = { .read = ima_show_measurements_count }; @@ -158,7 +158,7 @@ static int ima_measurements_open(struct inode *inode, struct file *file) return seq_open(file, &ima_measurments_seqops); } -static struct file_operations ima_measurements_ops = { +static const struct file_operations ima_measurements_ops = { .open = ima_measurements_open, .read = seq_read, .llseek = seq_lseek, @@ -233,7 +233,7 @@ static int ima_ascii_measurements_open(struct inode *inode, struct file *file) return seq_open(file, &ima_ascii_measurements_seqops); } -static struct file_operations ima_ascii_measurements_ops = { +static const struct file_operations ima_ascii_measurements_ops = { .open = ima_ascii_measurements_open, .read = seq_read, .llseek = seq_lseek, @@ -313,7 +313,7 @@ static int ima_release_policy(struct inode *inode, struct file *file) return 0; } -static struct file_operations ima_measure_policy_ops = { +static const struct file_operations ima_measure_policy_ops = { .open = ima_open_policy, .write = ima_write_policy, .release = ima_release_policy diff --git a/virt/kvm/kvm_main.c b/virt/kvm/kvm_main.c index b5e7e3f1183..e79c54034bc 100644 --- a/virt/kvm/kvm_main.c +++ b/virt/kvm/kvm_main.c @@ -2625,7 +2625,7 @@ static int vcpu_stat_get(void *_offset, u64 *val) DEFINE_SIMPLE_ATTRIBUTE(vcpu_stat_fops, vcpu_stat_get, NULL, "%llu\n"); -static struct file_operations *stat_fops[] = { +static const struct file_operations *stat_fops[] = { [KVM_STAT_VCPU] = &vcpu_stat_fops, [KVM_STAT_VM] = &vm_stat_fops, }; -- cgit v1.2.3-70-g09d2 From a28b3dc90964ed961b6ed2c320885ab8b3a0a8ff Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Thu, 1 Oct 2009 15:43:57 -0700 Subject: revert "m68k: convert to asm-generic/hardirq.h" Revert 45d80eea87c9f8292d2d33173d6866c0ec57238a ("m68k: convert to asm-generic/hardirq.h") - it fails to compile due to an inclusion tangle: In file included from include/linux/irq.h:12, from include/asm-generic/hardirq.h:6, from /usr/src/devel/arch/m68k/include/asm/hardirq_mm.h:6, from /usr/src/devel/arch/m68k/include/asm/hardirq.h:4, from include/linux/hardirq.h:10, from /usr/src/devel/arch/m68k/include/asm/system_mm.h:69, from /usr/src/devel/arch/m68k/include/asm/system.h:4, from include/linux/list.h:7, from include/linux/preempt.h:11, from include/linux/spinlock.h:50, from include/linux/seqlock.h:29, from include/linux/time.h:8, from include/linux/timex.h:56, from include/linux/sched.h:56, from arch/m68k/kernel/asm-offsets.c:14: include/linux/smp.h:17: error: field 'list' has incomplete type Cc: Christoph Hellwig Cc: Geert Uytterhoeven Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/m68k/include/asm/hardirq_mm.h | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/m68k/include/asm/hardirq_mm.h b/arch/m68k/include/asm/hardirq_mm.h index 554f65b6cd3..394ee946015 100644 --- a/arch/m68k/include/asm/hardirq_mm.h +++ b/arch/m68k/include/asm/hardirq_mm.h @@ -1,8 +1,16 @@ #ifndef __M68K_HARDIRQ_H #define __M68K_HARDIRQ_H -#define HARDIRQ_BITS 8 +#include +#include + +/* entry.S is sensitive to the offsets of these fields */ +typedef struct { + unsigned int __softirq_pending; +} ____cacheline_aligned irq_cpustat_t; -#include +#include /* Standard mappings for irq_cpustat_t above */ + +#define HARDIRQ_BITS 8 #endif -- cgit v1.2.3-70-g09d2 From d22a001bf6a502e978a8617e3f297b4d762cfbb5 Mon Sep 17 00:00:00 2001 From: Mark Salter Date: Thu, 1 Oct 2009 15:44:01 -0700 Subject: mn10300: fix kernel build failures when using gcc-4.x Fix some build failures when using gcc-4.x for MN10300. Firstly, __get_user() fails to build because the pointer points to a const and __gu_val ends up being read-only: In file included from include/linux/mempolicy.h:62, from init/main.c:50: include/linux/pagemap.h: In function 'fault_in_pages_readable': include/linux/pagemap.h:394: error: read-only variable '__gu_val' used as 'asm' output include/linux/pagemap.h:394: error: read-only variable '__gu_val' used as 'asm' output include/linux/pagemap.h:394: error: read-only variable '__gu_val' used as 'asm' output include/linux/pagemap.h:400: error: read-only variable '__gu_val' used as 'asm' output include/linux/pagemap.h:400: error: read-only variable '__gu_val' used as 'asm' output include/linux/pagemap.h:400: error: read-only variable '__gu_val' used as 'asm' output make[1]: *** [init/main.o] Error 1 Secondly, gcc-4 doesn't allow casts of lvalues: UPD include/linux/compile.h arch/mn10300/kernel/rtc.c: In function 'calibrate_clock': arch/mn10300/kernel/rtc.c:170: error: lvalue required as left operand of assignment arch/mn10300/kernel/rtc.c:172: error: lvalue required as left operand of assignment make[1]: *** [arch/mn10300/kernel/rtc.o] Error 1 These are seen with gcc 4.2.1. Signed-off-by: Mark Salter Signed-off-by: David Howells Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/mn10300/include/asm/uaccess.h | 73 ++++++++++++++------------ arch/mn10300/unit-asb2303/include/unit/clock.h | 6 +-- arch/mn10300/unit-asb2305/include/unit/clock.h | 6 +-- 3 files changed, 45 insertions(+), 40 deletions(-) (limited to 'arch') diff --git a/arch/mn10300/include/asm/uaccess.h b/arch/mn10300/include/asm/uaccess.h index 8a3a4dd5576..167e10ff06d 100644 --- a/arch/mn10300/include/asm/uaccess.h +++ b/arch/mn10300/include/asm/uaccess.h @@ -129,42 +129,47 @@ extern int fixup_exception(struct pt_regs *regs); struct __large_struct { unsigned long buf[100]; }; #define __m(x) (*(struct __large_struct *)(x)) -#define __get_user_nocheck(x, ptr, size) \ -({ \ - __typeof(*(ptr)) __gu_val; \ - unsigned long __gu_addr; \ - int __gu_err; \ - __gu_addr = (unsigned long) (ptr); \ - switch (size) { \ - case 1: __get_user_asm("bu"); break; \ - case 2: __get_user_asm("hu"); break; \ - case 4: __get_user_asm("" ); break; \ - default: __get_user_unknown(); break; \ - } \ - x = (__typeof__(*(ptr))) __gu_val; \ - __gu_err; \ +#define __get_user_nocheck(x, ptr, size) \ +({ \ + unsigned long __gu_addr; \ + int __gu_err; \ + __gu_addr = (unsigned long) (ptr); \ + switch (size) { \ + case 1: { \ + unsigned char __gu_val; \ + __get_user_asm("bu"); \ + (x) = *(__force __typeof__(*(ptr))*) &__gu_val; \ + break; \ + } \ + case 2: { \ + unsigned short __gu_val; \ + __get_user_asm("hu"); \ + (x) = *(__force __typeof__(*(ptr))*) &__gu_val; \ + break; \ + } \ + case 4: { \ + unsigned int __gu_val; \ + __get_user_asm(""); \ + (x) = *(__force __typeof__(*(ptr))*) &__gu_val; \ + break; \ + } \ + default: \ + __get_user_unknown(); \ + break; \ + } \ + __gu_err; \ }) -#define __get_user_check(x, ptr, size) \ -({ \ - __typeof__(*(ptr)) __gu_val; \ - unsigned long __gu_addr; \ - int __gu_err; \ - __gu_addr = (unsigned long) (ptr); \ - if (likely(__access_ok(__gu_addr,size))) { \ - switch (size) { \ - case 1: __get_user_asm("bu"); break; \ - case 2: __get_user_asm("hu"); break; \ - case 4: __get_user_asm("" ); break; \ - default: __get_user_unknown(); break; \ - } \ - } \ - else { \ - __gu_err = -EFAULT; \ - __gu_val = 0; \ - } \ - x = (__typeof__(*(ptr))) __gu_val; \ - __gu_err; \ +#define __get_user_check(x, ptr, size) \ +({ \ + int _e; \ + if (likely(__access_ok((unsigned long) (ptr), (size)))) \ + _e = __get_user_nocheck((x), (ptr), (size)); \ + else { \ + _e = -EFAULT; \ + (x) = (__typeof__(x))0; \ + } \ + _e; \ }) #define __get_user_asm(INSN) \ diff --git a/arch/mn10300/unit-asb2303/include/unit/clock.h b/arch/mn10300/unit-asb2303/include/unit/clock.h index 8b450e920af..2a0bf79ab96 100644 --- a/arch/mn10300/unit-asb2303/include/unit/clock.h +++ b/arch/mn10300/unit-asb2303/include/unit/clock.h @@ -20,9 +20,9 @@ extern unsigned long mn10300_ioclk; /* IOCLK (crystal speed) in HZ */ extern unsigned long mn10300_iobclk; extern unsigned long mn10300_tsc_per_HZ; -#define MN10300_IOCLK ((unsigned long)mn10300_ioclk) +#define MN10300_IOCLK mn10300_ioclk /* If this processors has a another clock, uncomment the below. */ -/* #define MN10300_IOBCLK ((unsigned long)mn10300_iobclk) */ +/* #define MN10300_IOBCLK mn10300_iobclk */ #else /* !CONFIG_MN10300_RTC */ @@ -35,7 +35,7 @@ extern unsigned long mn10300_tsc_per_HZ; #define MN10300_TSCCLK MN10300_IOCLK #ifdef CONFIG_MN10300_RTC -#define MN10300_TSC_PER_HZ ((unsigned long)mn10300_tsc_per_HZ) +#define MN10300_TSC_PER_HZ mn10300_tsc_per_HZ #else /* !CONFIG_MN10300_RTC */ #define MN10300_TSC_PER_HZ (MN10300_TSCCLK/HZ) #endif /* !CONFIG_MN10300_RTC */ diff --git a/arch/mn10300/unit-asb2305/include/unit/clock.h b/arch/mn10300/unit-asb2305/include/unit/clock.h index 7d514841ffd..67be3f2eb18 100644 --- a/arch/mn10300/unit-asb2305/include/unit/clock.h +++ b/arch/mn10300/unit-asb2305/include/unit/clock.h @@ -20,9 +20,9 @@ extern unsigned long mn10300_ioclk; /* IOCLK (crystal speed) in HZ */ extern unsigned long mn10300_iobclk; extern unsigned long mn10300_tsc_per_HZ; -#define MN10300_IOCLK ((unsigned long)mn10300_ioclk) +#define MN10300_IOCLK mn10300_ioclk /* If this processors has a another clock, uncomment the below. */ -/* #define MN10300_IOBCLK ((unsigned long)mn10300_iobclk) */ +/* #define MN10300_IOBCLK mn10300_iobclk */ #else /* !CONFIG_MN10300_RTC */ @@ -35,7 +35,7 @@ extern unsigned long mn10300_tsc_per_HZ; #define MN10300_TSCCLK MN10300_IOCLK #ifdef CONFIG_MN10300_RTC -#define MN10300_TSC_PER_HZ ((unsigned long)mn10300_tsc_per_HZ) +#define MN10300_TSC_PER_HZ mn10300_tsc_per_HZ #else /* !CONFIG_MN10300_RTC */ #define MN10300_TSC_PER_HZ (MN10300_TSCCLK/HZ) #endif /* !CONFIG_MN10300_RTC */ -- cgit v1.2.3-70-g09d2 From 392d814daf460a9564d29b2cebc51e1ea34e0504 Mon Sep 17 00:00:00 2001 From: Samuel Thibault Date: Thu, 1 Oct 2009 15:44:02 -0700 Subject: x86: fix csum_ipv6_magic asm memory clobber Just like ip_fast_csum, the assembly snippet in csum_ipv6_magic needs a memory clobber, as it is only passed the address of the buffer, not a memory reference to the buffer itself. This caused failures in Hurd's pfinetv4 when we tried to compile it with gcc-4.3 (bogus checksums). Signed-off-by: Samuel Thibault Cc: Ingo Molnar Cc: Thomas Gleixner Cc: "H. Peter Anvin" Acked-by: "David S. Miller" Cc: Andi Kleen Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/x86/include/asm/checksum_32.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/x86/include/asm/checksum_32.h b/arch/x86/include/asm/checksum_32.h index 7c5ef8b14d9..46fc474fd81 100644 --- a/arch/x86/include/asm/checksum_32.h +++ b/arch/x86/include/asm/checksum_32.h @@ -161,7 +161,8 @@ static inline __sum16 csum_ipv6_magic(const struct in6_addr *saddr, "adcl $0, %0 ;\n" : "=&r" (sum) : "r" (saddr), "r" (daddr), - "r" (htonl(len)), "r" (htonl(proto)), "0" (sum)); + "r" (htonl(len)), "r" (htonl(proto)), "0" (sum) + : "memory"); return csum_fold(sum); } -- cgit v1.2.3-70-g09d2 From 26f14947dbf31d60d1a67eee837a6d28c1e8830d Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Thu, 1 Oct 2009 15:44:18 -0700 Subject: s3cmci: Kconfig selection for PIO/DMA/Both Add a selection for the data transfer mode of the s3cmci driver, allowing for either a configuration or rumtime selection of the use of the DMA or PIO transfer code. The PIO only mode is 476 bytes smaller than the driver with both methods compiled in. Signed-off-by: Ben Dooks Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/arm/plat-s3c24xx/include/plat/mci.h | 1 + drivers/mmc/host/Kconfig | 34 ++++++++++++++++++++++++++++ drivers/mmc/host/s3cmci.c | 39 +++++++++++++++++++++++++------- 3 files changed, 66 insertions(+), 8 deletions(-) (limited to 'arch') diff --git a/arch/arm/plat-s3c24xx/include/plat/mci.h b/arch/arm/plat-s3c24xx/include/plat/mci.h index 2d0852ac3b2..f1bd6d4198d 100644 --- a/arch/arm/plat-s3c24xx/include/plat/mci.h +++ b/arch/arm/plat-s3c24xx/include/plat/mci.h @@ -4,6 +4,7 @@ struct s3c24xx_mci_pdata { unsigned int wprotect_invert : 1; unsigned int detect_invert : 1; /* set => detect active high. */ + unsigned int use_dma : 1; unsigned int gpio_detect; unsigned int gpio_wprotect; diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig index 7cb057f3f88..cf6a6545240 100644 --- a/drivers/mmc/host/Kconfig +++ b/drivers/mmc/host/Kconfig @@ -276,6 +276,40 @@ config MMC_S3C If unsure, say N. +choice + prompt "Samsung S3C SD/MMC transfer code" + depends on MMC_S3C + +config MMC_S3C_PIO + bool "Use PIO transfers only" + help + Use PIO to transfer data between memory and the hardware. + + PIO is slower than DMA as it requires CPU instructions to + move the data. This has been the traditional default for + the S3C MCI driver. + +config MMC_S3C_DMA + bool "Use DMA transfers only (EXPERIMENTAL)" + depends on EXPERIMENTAL + help + Use DMA to transfer data between memory and the hardare. + + Currently, the DMA support in this driver seems to not be + working properly and needs to be debugged before this + option is useful. + +config MMC_S3C_PIODMA + bool "Support for both PIO and DMA (EXPERIMENTAL)" + help + Compile both the PIO and DMA transfer routines into the + driver and let the platform select at run-time which one + is best. + + See notes for the DMA option. + +endchoice + config MMC_SDRICOH_CS tristate "MMC/SD driver for Ricoh Bay1Controllers (EXPERIMENTAL)" depends on EXPERIMENTAL && PCI && PCMCIA diff --git a/drivers/mmc/host/s3cmci.c b/drivers/mmc/host/s3cmci.c index 7660ac4572e..0adf31895f2 100644 --- a/drivers/mmc/host/s3cmci.c +++ b/drivers/mmc/host/s3cmci.c @@ -164,6 +164,25 @@ static void dbg_dumpregs(struct s3cmci_host *host, char *prefix) { } #endif /* CONFIG_MMC_DEBUG */ +/** + * s3cmci_host_usedma - return whether the host is using dma or pio + * @host: The host state + * + * Return true if the host is using DMA to transfer data, else false + * to use PIO mode. Will return static data depending on the driver + * configuration. + */ +static inline bool s3cmci_host_usedma(struct s3cmci_host *host) +{ +#ifdef CONFIG_MMC_S3C_PIO + return false; +#elif defined(CONFIG_MMC_S3C_DMA) + return true; +#else + return host->dodma; +#endif +} + static inline u32 enable_imask(struct s3cmci_host *host, u32 imask) { u32 newmask; @@ -560,7 +579,7 @@ static irqreturn_t s3cmci_irq(int irq, void *dev_id) goto irq_out; } - if (!host->dodma) { + if (!s3cmci_host_usedma(host)) { if ((host->pio_active == XFER_WRITE) && (mci_fsta & S3C2410_SDIFSTA_TFDET)) { @@ -796,7 +815,7 @@ static void finalize_request(struct s3cmci_host *host) if (cmd->data && (cmd->error == 0) && (cmd->data->error == 0)) { - if (host->dodma && (!host->dma_complete)) { + if (s3cmci_host_usedma(host) && (!host->dma_complete)) { dbg(host, dbg_dma, "DMA Missing!\n"); return; } @@ -848,7 +867,7 @@ static void finalize_request(struct s3cmci_host *host) /* If we had an error while transfering data we flush the * DMA channel and the fifo to clear out any garbage. */ if (mrq->data->error != 0) { - if (host->dodma) + if (s3cmci_host_usedma(host)) s3c2410_dma_ctrl(host->dma, S3C2410_DMAOP_FLUSH); if (host->is2440) { @@ -968,7 +987,7 @@ static int s3cmci_setup_data(struct s3cmci_host *host, struct mmc_data *data) dcon = data->blocks & S3C2410_SDIDCON_BLKNUM_MASK; - if (host->dodma) + if (s3cmci_host_usedma(host)) dcon |= S3C2410_SDIDCON_DMAEN; if (host->bus_width == MMC_BUS_WIDTH_4) @@ -1114,7 +1133,7 @@ static void s3cmci_send_request(struct mmc_host *mmc) return; } - if (host->dodma) + if (s3cmci_host_usedma(host)) res = s3cmci_prepare_dma(host, cmd->data); else res = s3cmci_prepare_pio(host, cmd->data); @@ -1398,7 +1417,7 @@ static int s3cmci_state_show(struct seq_file *seq, void *v) seq_printf(seq, "IRQ disabled = %d\n", host->irq_disabled); seq_printf(seq, "IRQ state = %d\n", host->irq_state); seq_printf(seq, "CD IRQ = %d\n", host->irq_cd); - seq_printf(seq, "Do DMA = %d\n", host->dodma); + seq_printf(seq, "Do DMA = %d\n", s3cmci_host_usedma(host)); seq_printf(seq, "SDIIMSK at %d\n", host->sdiimsk); seq_printf(seq, "SDIDATA at %d\n", host->sdidata); @@ -1559,12 +1578,15 @@ static int __devinit s3cmci_probe(struct platform_device *pdev) host->clk_div = 2; } - host->dodma = 0; host->complete_what = COMPLETION_NONE; host->pio_active = XFER_NONE; host->dma = S3CMCI_DMA; +#ifdef CONFIG_MMC_S3C_PIODMA + host->dodma = host->pdata->dma; +#endif + host->mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (!host->mem) { dev_err(&pdev->dev, @@ -1702,7 +1724,8 @@ static int __devinit s3cmci_probe(struct platform_device *pdev) s3cmci_debugfs_attach(host); platform_set_drvdata(pdev, mmc); - dev_info(&pdev->dev, "initialisation done.\n"); + dev_info(&pdev->dev, "%s - using %s\n", mmc_hostname(mmc), + s3cmci_host_usedma(host) ? "dma" : "pio"); return 0; -- cgit v1.2.3-70-g09d2 From 00acfaeead211562cc5f88882c47bf1cb16c041a Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Thu, 1 Oct 2009 15:44:21 -0700 Subject: s3cmci: add better support for no card detect or write protect available Add better support for omitting either the card detect or the write protect GPIOs if the board does not support it. Add the fields no_wprotect and no_detect to the platform data which when set indicate the absence of the respective GPIOs. Note, this also fixes a minor bug where it tries to free IRQ0 if there is no detect gpio available. Signed-off-by: Ben Dooks Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/arm/plat-s3c24xx/include/plat/mci.h | 2 ++ drivers/mmc/host/s3cmci.c | 46 +++++++++++++++++--------------- 2 files changed, 27 insertions(+), 21 deletions(-) (limited to 'arch') diff --git a/arch/arm/plat-s3c24xx/include/plat/mci.h b/arch/arm/plat-s3c24xx/include/plat/mci.h index f1bd6d4198d..c2cef613968 100644 --- a/arch/arm/plat-s3c24xx/include/plat/mci.h +++ b/arch/arm/plat-s3c24xx/include/plat/mci.h @@ -2,6 +2,8 @@ #define _ARCH_MCI_H struct s3c24xx_mci_pdata { + unsigned int no_wprotect : 1; + unsigned int no_detect : 1; unsigned int wprotect_invert : 1; unsigned int detect_invert : 1; /* set => detect active high. */ unsigned int use_dma : 1; diff --git a/drivers/mmc/host/s3cmci.c b/drivers/mmc/host/s3cmci.c index 4b627ca16cc..99b74a35102 100644 --- a/drivers/mmc/host/s3cmci.c +++ b/drivers/mmc/host/s3cmci.c @@ -1299,7 +1299,7 @@ static int s3cmci_get_ro(struct mmc_host *mmc) struct s3c24xx_mci_pdata *pdata = host->pdata; int ret; - if (pdata->gpio_wprotect == 0) + if (pdata->no_wprotect) return 0; ret = s3c2410_gpio_getpin(pdata->gpio_wprotect); @@ -1647,30 +1647,34 @@ static int __devinit s3cmci_probe(struct platform_device *pdev) disable_irq(host->irq); host->irq_state = false; - if (host->pdata->gpio_detect) { + if (!host->pdata->no_detect) { ret = gpio_request(host->pdata->gpio_detect, "s3cmci detect"); if (ret) { dev_err(&pdev->dev, "failed to get detect gpio\n"); goto probe_free_irq; } - } - - host->irq_cd = s3c2410_gpio_getirq(host->pdata->gpio_detect); - if (host->irq_cd >= 0) { - if (request_irq(host->irq_cd, s3cmci_irq_cd, - IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, - DRIVER_NAME, host)) { - dev_err(&pdev->dev, "can't get card detect irq.\n"); - ret = -ENOENT; - goto probe_free_gpio_cd; + host->irq_cd = s3c2410_gpio_getirq(host->pdata->gpio_detect); + + if (host->irq_cd >= 0) { + if (request_irq(host->irq_cd, s3cmci_irq_cd, + IRQF_TRIGGER_RISING | + IRQF_TRIGGER_FALLING, + DRIVER_NAME, host)) { + dev_err(&pdev->dev, + "can't get card detect irq.\n"); + ret = -ENOENT; + goto probe_free_gpio_cd; + } + } else { + dev_warn(&pdev->dev, + "host detect has no irq available\n"); + gpio_direction_input(host->pdata->gpio_detect); } - } else { - dev_warn(&pdev->dev, "host detect has no irq available\n"); - gpio_direction_input(host->pdata->gpio_detect); - } + } else + host->irq_cd = -1; - if (host->pdata->gpio_wprotect) { + if (!host->pdata->no_wprotect) { ret = gpio_request(host->pdata->gpio_wprotect, "s3cmci wp"); if (ret) { dev_err(&pdev->dev, "failed to get writeprotect\n"); @@ -1774,11 +1778,11 @@ static int __devinit s3cmci_probe(struct platform_device *pdev) s3c2410_dma_free(host->dma, &s3cmci_dma_client); probe_free_gpio_wp: - if (host->pdata->gpio_wprotect) + if (!host->pdata->no_wprotect) gpio_free(host->pdata->gpio_wprotect); probe_free_gpio_cd: - if (host->pdata->gpio_detect) + if (!host->pdata->no_detect) gpio_free(host->pdata->gpio_detect); probe_free_irq_cd: @@ -1837,10 +1841,10 @@ static int __devexit s3cmci_remove(struct platform_device *pdev) free_irq(host->irq, host); - if (pd->gpio_wprotect) + if (!pd->no_wprotect) gpio_free(pd->gpio_wprotect); - if (pd->gpio_detect) + if (!pd->no_detect) gpio_free(pd->gpio_detect); for (i = S3C2410_GPE(5); i <= S3C2410_GPE(10); i++) -- cgit v1.2.3-70-g09d2 From 0a4bc5e89cfc3cc3083acef130cd8b670ee56914 Mon Sep 17 00:00:00 2001 From: Hartley Sweeten Date: Tue, 29 Sep 2009 23:49:02 +0100 Subject: ARM: 5735/1: sa1111: CodingStyle cleanups EXPORT_* macros should follow immediately after the closing function brace line. Signed-off-by: H Hartley Sweeten Acked-by: Kristoffer Ericson Signed-off-by: Russell King --- arch/arm/common/sa1111.c | 25 ++++++++++++------------- 1 file changed, 12 insertions(+), 13 deletions(-) (limited to 'arch') diff --git a/arch/arm/common/sa1111.c b/arch/arm/common/sa1111.c index ef12794c3c6..8ba7044c554 100644 --- a/arch/arm/common/sa1111.c +++ b/arch/arm/common/sa1111.c @@ -1032,6 +1032,7 @@ unsigned int sa1111_pll_clock(struct sa1111_dev *sadev) return __sa1111_pll_clock(sachip); } +EXPORT_SYMBOL(sa1111_pll_clock); /** * sa1111_select_audio_mode - select I2S or AC link mode @@ -1059,6 +1060,7 @@ void sa1111_select_audio_mode(struct sa1111_dev *sadev, int mode) spin_unlock_irqrestore(&sachip->lock, flags); } +EXPORT_SYMBOL(sa1111_select_audio_mode); /** * sa1111_set_audio_rate - set the audio sample rate @@ -1083,6 +1085,7 @@ int sa1111_set_audio_rate(struct sa1111_dev *sadev, int rate) return 0; } +EXPORT_SYMBOL(sa1111_set_audio_rate); /** * sa1111_get_audio_rate - get the audio sample rate @@ -1100,6 +1103,7 @@ int sa1111_get_audio_rate(struct sa1111_dev *sadev) return __sa1111_pll_clock(sachip) / (256 * div); } +EXPORT_SYMBOL(sa1111_get_audio_rate); void sa1111_set_io_dir(struct sa1111_dev *sadev, unsigned int bits, unsigned int dir, @@ -1128,6 +1132,7 @@ void sa1111_set_io_dir(struct sa1111_dev *sadev, MODIFY_BITS(gpio + SA1111_GPIO_PCSDR, (bits >> 16) & 255, sleep_dir >> 16); spin_unlock_irqrestore(&sachip->lock, flags); } +EXPORT_SYMBOL(sa1111_set_io_dir); void sa1111_set_io(struct sa1111_dev *sadev, unsigned int bits, unsigned int v) { @@ -1142,6 +1147,7 @@ void sa1111_set_io(struct sa1111_dev *sadev, unsigned int bits, unsigned int v) MODIFY_BITS(gpio + SA1111_GPIO_PCDWR, (bits >> 16) & 255, v >> 16); spin_unlock_irqrestore(&sachip->lock, flags); } +EXPORT_SYMBOL(sa1111_set_io); void sa1111_set_sleep_io(struct sa1111_dev *sadev, unsigned int bits, unsigned int v) { @@ -1156,6 +1162,7 @@ void sa1111_set_sleep_io(struct sa1111_dev *sadev, unsigned int bits, unsigned i MODIFY_BITS(gpio + SA1111_GPIO_PCSSR, (bits >> 16) & 255, v >> 16); spin_unlock_irqrestore(&sachip->lock, flags); } +EXPORT_SYMBOL(sa1111_set_sleep_io); /* * Individual device operations. @@ -1176,6 +1183,7 @@ void sa1111_enable_device(struct sa1111_dev *sadev) sa1111_writel(val | sadev->skpcr_mask, sachip->base + SA1111_SKPCR); spin_unlock_irqrestore(&sachip->lock, flags); } +EXPORT_SYMBOL(sa1111_enable_device); /** * sa1111_disable_device - disable an on-chip SA1111 function block @@ -1192,6 +1200,7 @@ void sa1111_disable_device(struct sa1111_dev *sadev) sa1111_writel(val & ~sadev->skpcr_mask, sachip->base + SA1111_SKPCR); spin_unlock_irqrestore(&sachip->lock, flags); } +EXPORT_SYMBOL(sa1111_disable_device); /* * SA1111 "Register Access Bus." @@ -1259,17 +1268,20 @@ struct bus_type sa1111_bus_type = { .suspend = sa1111_bus_suspend, .resume = sa1111_bus_resume, }; +EXPORT_SYMBOL(sa1111_bus_type); int sa1111_driver_register(struct sa1111_driver *driver) { driver->drv.bus = &sa1111_bus_type; return driver_register(&driver->drv); } +EXPORT_SYMBOL(sa1111_driver_register); void sa1111_driver_unregister(struct sa1111_driver *driver) { driver_unregister(&driver->drv); } +EXPORT_SYMBOL(sa1111_driver_unregister); static int __init sa1111_init(void) { @@ -1290,16 +1302,3 @@ module_exit(sa1111_exit); MODULE_DESCRIPTION("Intel Corporation SA1111 core driver"); MODULE_LICENSE("GPL"); - -EXPORT_SYMBOL(sa1111_select_audio_mode); -EXPORT_SYMBOL(sa1111_set_audio_rate); -EXPORT_SYMBOL(sa1111_get_audio_rate); -EXPORT_SYMBOL(sa1111_set_io_dir); -EXPORT_SYMBOL(sa1111_set_io); -EXPORT_SYMBOL(sa1111_set_sleep_io); -EXPORT_SYMBOL(sa1111_enable_device); -EXPORT_SYMBOL(sa1111_disable_device); -EXPORT_SYMBOL(sa1111_pll_clock); -EXPORT_SYMBOL(sa1111_bus_type); -EXPORT_SYMBOL(sa1111_driver_register); -EXPORT_SYMBOL(sa1111_driver_unregister); -- cgit v1.2.3-70-g09d2 From 31abdb744179159f8b605f56da5b197b188e1689 Mon Sep 17 00:00:00 2001 From: David Brown Date: Thu, 1 Oct 2009 17:43:29 +0100 Subject: ARM: 5739/1: ARM: allow empty ATAG_CORE From: David Brown The ATAG_CORE is allowed to be empty. Although this is handled by parse_tag_core(), __vet_atags during startup rejects this tag unless it contains data. Allow the initial tag to be either the full size, or empty. Signed-off-by: David Brown Signed-off-by: Russell King --- arch/arm/kernel/head-common.S | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/kernel/head-common.S b/arch/arm/kernel/head-common.S index 93ad576b2d7..885a7214418 100644 --- a/arch/arm/kernel/head-common.S +++ b/arch/arm/kernel/head-common.S @@ -13,6 +13,7 @@ #define ATAG_CORE 0x54410001 #define ATAG_CORE_SIZE ((2*4 + 3*4) >> 2) +#define ATAG_CORE_SIZE_EMPTY ((2*4) >> 2) .align 2 .type __switch_data, %object @@ -251,7 +252,8 @@ __vet_atags: bne 1f ldr r5, [r2, #0] @ is first tag ATAG_CORE? - subs r5, r5, #ATAG_CORE_SIZE + cmp r5, #ATAG_CORE_SIZE + cmpne r5, #ATAG_CORE_SIZE_EMPTY bne 1f ldr r5, [r2, #4] ldr r6, =ATAG_CORE -- cgit v1.2.3-70-g09d2 From 6806bfe18fca92e2001538b84cab5f63c5ea4bed Mon Sep 17 00:00:00 2001 From: Greg Ungerer Date: Fri, 2 Oct 2009 00:45:28 +0100 Subject: ARM: 5740/1: fix valid_phys_addr_range() range check Commit 1522ac3ec95ff0230e7aa516f86b674fdf72866c ("Fix virtual to physical translation macro corner cases") breaks the end of memory check in valid_phys_addr_range(). The modified expression results in the apparent /dev/mem size being 2 bytes smaller than what it actually is. This patch reworks the expression to correctly check the address, while maintaining use of a valid address to __pa(). Signed-off-by: Greg Ungerer Signed-off-by: Russell King --- arch/arm/mm/mmap.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mm/mmap.c b/arch/arm/mm/mmap.c index f7457fea6de..2b7996401b0 100644 --- a/arch/arm/mm/mmap.c +++ b/arch/arm/mm/mmap.c @@ -124,7 +124,7 @@ int valid_phys_addr_range(unsigned long addr, size_t size) { if (addr < PHYS_OFFSET) return 0; - if (addr + size >= __pa(high_memory - 1)) + if (addr + size > __pa(high_memory - 1) + 1) return 0; return 1; -- cgit v1.2.3-70-g09d2 From 4fb2847437d871fe579f820ceb18031db3359901 Mon Sep 17 00:00:00 2001 From: "Kirill A. Shutemov" Date: Fri, 25 Sep 2009 13:39:47 +0100 Subject: ARM: 5727/1: Pass IFSR register to do_PrefetchAbort() Instruction fault status register, IFSR, was introduced on ARMv6 to provide status information about the last insturction fault. It needed for proper prefetch abort handling. Now we have three prefetch abort model: * legacy - for CPUs before ARMv6. They doesn't provide neither IFSR nor IFAR. We simulate IFSR with section translation fault status for them to generalize code; * ARMv6 - provides IFSR, but not IFAR; * ARMv7 - provides both IFSR and IFAR. Signed-off-by: Kirill A. Shutemov Signed-off-by: Russell King --- arch/arm/include/asm/glue.h | 26 ++++++++++++++----- arch/arm/kernel/entry-armv.S | 18 +++++-------- arch/arm/kernel/entry-common.S | 7 ------ arch/arm/mm/Kconfig | 57 ++++++++++++++++++++++-------------------- arch/arm/mm/Makefile | 4 +++ arch/arm/mm/fault.c | 2 +- arch/arm/mm/pabort-legacy.S | 19 ++++++++++++++ arch/arm/mm/pabort-v6.S | 19 ++++++++++++++ arch/arm/mm/pabort-v7.S | 20 +++++++++++++++ arch/arm/mm/proc-arm1020.S | 2 +- arch/arm/mm/proc-arm1020e.S | 2 +- arch/arm/mm/proc-arm1022.S | 2 +- arch/arm/mm/proc-arm1026.S | 2 +- arch/arm/mm/proc-arm6_7.S | 4 +-- arch/arm/mm/proc-arm720.S | 2 +- arch/arm/mm/proc-arm740.S | 2 +- arch/arm/mm/proc-arm7tdmi.S | 2 +- arch/arm/mm/proc-arm920.S | 2 +- arch/arm/mm/proc-arm922.S | 2 +- arch/arm/mm/proc-arm925.S | 2 +- arch/arm/mm/proc-arm926.S | 2 +- arch/arm/mm/proc-arm940.S | 2 +- arch/arm/mm/proc-arm946.S | 2 +- arch/arm/mm/proc-arm9tdmi.S | 2 +- arch/arm/mm/proc-fa526.S | 2 +- arch/arm/mm/proc-feroceon.S | 2 +- arch/arm/mm/proc-mohawk.S | 2 +- arch/arm/mm/proc-sa110.S | 2 +- arch/arm/mm/proc-sa1100.S | 2 +- arch/arm/mm/proc-v6.S | 2 +- arch/arm/mm/proc-v7.S | 2 +- arch/arm/mm/proc-xsc3.S | 2 +- arch/arm/mm/proc-xscale.S | 2 +- 33 files changed, 144 insertions(+), 78 deletions(-) create mode 100644 arch/arm/mm/pabort-legacy.S create mode 100644 arch/arm/mm/pabort-v6.S create mode 100644 arch/arm/mm/pabort-v7.S (limited to 'arch') diff --git a/arch/arm/include/asm/glue.h b/arch/arm/include/asm/glue.h index a0e39d5d00c..234a3fc1c78 100644 --- a/arch/arm/include/asm/glue.h +++ b/arch/arm/include/asm/glue.h @@ -120,25 +120,39 @@ #endif /* - * Prefetch abort handler. If the CPU has an IFAR use that, otherwise - * use the address of the aborted instruction + * Prefetch Abort Model + * ================ + * + * We have the following to choose from: + * legacy - no IFSR, no IFAR + * v6 - ARMv6: IFSR, no IFAR + * v7 - ARMv7: IFSR and IFAR */ + #undef CPU_PABORT_HANDLER #undef MULTI_PABORT -#ifdef CONFIG_CPU_PABRT_IFAR +#ifdef CONFIG_CPU_PABRT_LEGACY +# ifdef CPU_PABORT_HANDLER +# define MULTI_PABORT 1 +# else +# define CPU_PABORT_HANDLER legacy_pabort +# endif +#endif + +#ifdef CONFIG_CPU_PABRT_V6 # ifdef CPU_PABORT_HANDLER # define MULTI_PABORT 1 # else -# define CPU_PABORT_HANDLER(reg, insn) mrc p15, 0, reg, cr6, cr0, 2 +# define CPU_PABORT_HANDLER v6_pabort # endif #endif -#ifdef CONFIG_CPU_PABRT_NOIFAR +#ifdef CONFIG_CPU_PABRT_V7 # ifdef CPU_PABORT_HANDLER # define MULTI_PABORT 1 # else -# define CPU_PABORT_HANDLER(reg, insn) mov reg, insn +# define CPU_PABORT_HANDLER v7_pabort # endif #endif diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S index 0a2ba51cf35..322410be573 100644 --- a/arch/arm/kernel/entry-armv.S +++ b/arch/arm/kernel/entry-armv.S @@ -311,22 +311,16 @@ __pabt_svc: tst r3, #PSR_I_BIT biceq r9, r9, #PSR_I_BIT - @ - @ set args, then call main handler - @ - @ r0 - address of faulting instruction - @ r1 - pointer to registers on stack - @ -#ifdef MULTI_PABORT mov r0, r2 @ pass address of aborted instruction. +#ifdef MULTI_PABORT ldr r4, .LCprocfns mov lr, pc ldr pc, [r4, #PROCESSOR_PABT_FUNC] #else - CPU_PABORT_HANDLER(r0, r2) + bl CPU_PABORT_HANDLER #endif msr cpsr_c, r9 @ Maybe enable interrupts - mov r1, sp @ regs + mov r2, sp @ regs bl do_PrefetchAbort @ call abort handler @ @@ -701,16 +695,16 @@ ENDPROC(__und_usr_unknown) __pabt_usr: usr_entry -#ifdef MULTI_PABORT mov r0, r2 @ pass address of aborted instruction. +#ifdef MULTI_PABORT ldr r4, .LCprocfns mov lr, pc ldr pc, [r4, #PROCESSOR_PABT_FUNC] #else - CPU_PABORT_HANDLER(r0, r2) + bl CPU_PABORT_HANDLER #endif enable_irq @ Enable interrupts - mov r1, sp @ regs + mov r2, sp @ regs bl do_PrefetchAbort @ call abort handler UNWIND(.fnend ) /* fall through */ diff --git a/arch/arm/kernel/entry-common.S b/arch/arm/kernel/entry-common.S index 825db52e558..f0fe95b7085 100644 --- a/arch/arm/kernel/entry-common.S +++ b/arch/arm/kernel/entry-common.S @@ -425,13 +425,6 @@ sys_mmap2: #endif ENDPROC(sys_mmap2) -ENTRY(pabort_ifar) - mrc p15, 0, r0, cr6, cr0, 2 -ENTRY(pabort_noifar) - mov pc, lr -ENDPROC(pabort_ifar) -ENDPROC(pabort_noifar) - #ifdef CONFIG_OABI_COMPAT /* diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig index 8d43e58f924..e993140edd8 100644 --- a/arch/arm/mm/Kconfig +++ b/arch/arm/mm/Kconfig @@ -17,7 +17,7 @@ config CPU_ARM610 select CPU_CP15_MMU select CPU_COPY_V3 if MMU select CPU_TLB_V3 if MMU - select CPU_PABRT_NOIFAR + select CPU_PABRT_LEGACY help The ARM610 is the successor to the ARM3 processor and was produced by VLSI Technology Inc. @@ -31,7 +31,7 @@ config CPU_ARM7TDMI depends on !MMU select CPU_32v4T select CPU_ABRT_LV4T - select CPU_PABRT_NOIFAR + select CPU_PABRT_LEGACY select CPU_CACHE_V4 help A 32-bit RISC microprocessor based on the ARM7 processor core @@ -49,7 +49,7 @@ config CPU_ARM710 select CPU_CP15_MMU select CPU_COPY_V3 if MMU select CPU_TLB_V3 if MMU - select CPU_PABRT_NOIFAR + select CPU_PABRT_LEGACY help A 32-bit RISC microprocessor based on the ARM7 processor core designed by Advanced RISC Machines Ltd. The ARM710 is the @@ -64,7 +64,7 @@ config CPU_ARM720T bool "Support ARM720T processor" if ARCH_INTEGRATOR select CPU_32v4T select CPU_ABRT_LV4T - select CPU_PABRT_NOIFAR + select CPU_PABRT_LEGACY select CPU_CACHE_V4 select CPU_CACHE_VIVT select CPU_CP15_MMU @@ -83,7 +83,7 @@ config CPU_ARM740T depends on !MMU select CPU_32v4T select CPU_ABRT_LV4T - select CPU_PABRT_NOIFAR + select CPU_PABRT_LEGACY select CPU_CACHE_V3 # although the core is v4t select CPU_CP15_MPU help @@ -100,7 +100,7 @@ config CPU_ARM9TDMI depends on !MMU select CPU_32v4T select CPU_ABRT_NOMMU - select CPU_PABRT_NOIFAR + select CPU_PABRT_LEGACY select CPU_CACHE_V4 help A 32-bit RISC microprocessor based on the ARM9 processor core @@ -114,7 +114,7 @@ config CPU_ARM920T bool "Support ARM920T processor" if ARCH_INTEGRATOR select CPU_32v4T select CPU_ABRT_EV4T - select CPU_PABRT_NOIFAR + select CPU_PABRT_LEGACY select CPU_CACHE_V4WT select CPU_CACHE_VIVT select CPU_CP15_MMU @@ -135,7 +135,7 @@ config CPU_ARM922T bool "Support ARM922T processor" if ARCH_INTEGRATOR select CPU_32v4T select CPU_ABRT_EV4T - select CPU_PABRT_NOIFAR + select CPU_PABRT_LEGACY select CPU_CACHE_V4WT select CPU_CACHE_VIVT select CPU_CP15_MMU @@ -154,7 +154,7 @@ config CPU_ARM925T bool "Support ARM925T processor" if ARCH_OMAP1 select CPU_32v4T select CPU_ABRT_EV4T - select CPU_PABRT_NOIFAR + select CPU_PABRT_LEGACY select CPU_CACHE_V4WT select CPU_CACHE_VIVT select CPU_CP15_MMU @@ -173,7 +173,7 @@ config CPU_ARM926T bool "Support ARM926T processor" if ARCH_INTEGRATOR || MACH_REALVIEW_EB select CPU_32v5 select CPU_ABRT_EV5TJ - select CPU_PABRT_NOIFAR + select CPU_PABRT_LEGACY select CPU_CACHE_VIVT select CPU_CP15_MMU select CPU_COPY_V4WB if MMU @@ -191,7 +191,7 @@ config CPU_FA526 bool select CPU_32v4 select CPU_ABRT_EV4 - select CPU_PABRT_NOIFAR + select CPU_PABRT_LEGACY select CPU_CACHE_VIVT select CPU_CP15_MMU select CPU_CACHE_FA @@ -210,7 +210,7 @@ config CPU_ARM940T depends on !MMU select CPU_32v4T select CPU_ABRT_NOMMU - select CPU_PABRT_NOIFAR + select CPU_PABRT_LEGACY select CPU_CACHE_VIVT select CPU_CP15_MPU help @@ -228,7 +228,7 @@ config CPU_ARM946E depends on !MMU select CPU_32v5 select CPU_ABRT_NOMMU - select CPU_PABRT_NOIFAR + select CPU_PABRT_LEGACY select CPU_CACHE_VIVT select CPU_CP15_MPU help @@ -244,7 +244,7 @@ config CPU_ARM1020 bool "Support ARM1020T (rev 0) processor" if ARCH_INTEGRATOR select CPU_32v5 select CPU_ABRT_EV4T - select CPU_PABRT_NOIFAR + select CPU_PABRT_LEGACY select CPU_CACHE_V4WT select CPU_CACHE_VIVT select CPU_CP15_MMU @@ -262,7 +262,7 @@ config CPU_ARM1020E bool "Support ARM1020E processor" if ARCH_INTEGRATOR select CPU_32v5 select CPU_ABRT_EV4T - select CPU_PABRT_NOIFAR + select CPU_PABRT_LEGACY select CPU_CACHE_V4WT select CPU_CACHE_VIVT select CPU_CP15_MMU @@ -275,7 +275,7 @@ config CPU_ARM1022 bool "Support ARM1022E processor" if ARCH_INTEGRATOR select CPU_32v5 select CPU_ABRT_EV4T - select CPU_PABRT_NOIFAR + select CPU_PABRT_LEGACY select CPU_CACHE_VIVT select CPU_CP15_MMU select CPU_COPY_V4WB if MMU # can probably do better @@ -293,7 +293,7 @@ config CPU_ARM1026 bool "Support ARM1026EJ-S processor" if ARCH_INTEGRATOR select CPU_32v5 select CPU_ABRT_EV5T # But need Jazelle, but EV5TJ ignores bit 10 - select CPU_PABRT_NOIFAR + select CPU_PABRT_LEGACY select CPU_CACHE_VIVT select CPU_CP15_MMU select CPU_COPY_V4WB if MMU # can probably do better @@ -311,7 +311,7 @@ config CPU_SA110 select CPU_32v3 if ARCH_RPC select CPU_32v4 if !ARCH_RPC select CPU_ABRT_EV4 - select CPU_PABRT_NOIFAR + select CPU_PABRT_LEGACY select CPU_CACHE_V4WB select CPU_CACHE_VIVT select CPU_CP15_MMU @@ -331,7 +331,7 @@ config CPU_SA1100 bool select CPU_32v4 select CPU_ABRT_EV4 - select CPU_PABRT_NOIFAR + select CPU_PABRT_LEGACY select CPU_CACHE_V4WB select CPU_CACHE_VIVT select CPU_CP15_MMU @@ -342,7 +342,7 @@ config CPU_XSCALE bool select CPU_32v5 select CPU_ABRT_EV5T - select CPU_PABRT_NOIFAR + select CPU_PABRT_LEGACY select CPU_CACHE_VIVT select CPU_CP15_MMU select CPU_TLB_V4WBI if MMU @@ -352,7 +352,7 @@ config CPU_XSC3 bool select CPU_32v5 select CPU_ABRT_EV5T - select CPU_PABRT_NOIFAR + select CPU_PABRT_LEGACY select CPU_CACHE_VIVT select CPU_CP15_MMU select CPU_TLB_V4WBI if MMU @@ -363,7 +363,7 @@ config CPU_MOHAWK bool select CPU_32v5 select CPU_ABRT_EV5T - select CPU_PABRT_NOIFAR + select CPU_PABRT_LEGACY select CPU_CACHE_VIVT select CPU_CP15_MMU select CPU_TLB_V4WBI if MMU @@ -374,7 +374,7 @@ config CPU_FEROCEON bool select CPU_32v5 select CPU_ABRT_EV5T - select CPU_PABRT_NOIFAR + select CPU_PABRT_LEGACY select CPU_CACHE_VIVT select CPU_CP15_MMU select CPU_COPY_FEROCEON if MMU @@ -394,7 +394,7 @@ config CPU_V6 bool "Support ARM V6 processor" if ARCH_INTEGRATOR || MACH_REALVIEW_EB || MACH_REALVIEW_PBX select CPU_32v6 select CPU_ABRT_EV6 - select CPU_PABRT_NOIFAR + select CPU_PABRT_V6 select CPU_CACHE_V6 select CPU_CACHE_VIPT select CPU_CP15_MMU @@ -420,7 +420,7 @@ config CPU_V7 select CPU_32v6K select CPU_32v7 select CPU_ABRT_EV7 - select CPU_PABRT_IFAR + select CPU_PABRT_V7 select CPU_CACHE_V7 select CPU_CACHE_VIPT select CPU_CP15_MMU @@ -482,10 +482,13 @@ config CPU_ABRT_EV6 config CPU_ABRT_EV7 bool -config CPU_PABRT_IFAR +config CPU_PABRT_LEGACY bool -config CPU_PABRT_NOIFAR +config CPU_PABRT_V6 + bool + +config CPU_PABRT_V7 bool # The cache model diff --git a/arch/arm/mm/Makefile b/arch/arm/mm/Makefile index 63e3f6dd0e2..055cb2aa813 100644 --- a/arch/arm/mm/Makefile +++ b/arch/arm/mm/Makefile @@ -27,6 +27,10 @@ obj-$(CONFIG_CPU_ABRT_EV5TJ) += abort-ev5tj.o obj-$(CONFIG_CPU_ABRT_EV6) += abort-ev6.o obj-$(CONFIG_CPU_ABRT_EV7) += abort-ev7.o +obj-$(CONFIG_CPU_PABRT_LEGACY) += pabort-legacy.o +obj-$(CONFIG_CPU_PABRT_V6) += pabort-v6.o +obj-$(CONFIG_CPU_PABRT_V7) += pabort-v7.o + obj-$(CONFIG_CPU_CACHE_V3) += cache-v3.o obj-$(CONFIG_CPU_CACHE_V4) += cache-v4.o obj-$(CONFIG_CPU_CACHE_V4WT) += cache-v4wt.o diff --git a/arch/arm/mm/fault.c b/arch/arm/mm/fault.c index 379f7855605..fd2375f8499 100644 --- a/arch/arm/mm/fault.c +++ b/arch/arm/mm/fault.c @@ -520,7 +520,7 @@ do_DataAbort(unsigned long addr, unsigned int fsr, struct pt_regs *regs) } asmlinkage void __exception -do_PrefetchAbort(unsigned long addr, struct pt_regs *regs) +do_PrefetchAbort(unsigned long addr, unsigned int ifsr, struct pt_regs *regs) { do_translation_fault(addr, FSR_LNX_PF, regs); } diff --git a/arch/arm/mm/pabort-legacy.S b/arch/arm/mm/pabort-legacy.S new file mode 100644 index 00000000000..87970eba88e --- /dev/null +++ b/arch/arm/mm/pabort-legacy.S @@ -0,0 +1,19 @@ +#include +#include + +/* + * Function: legacy_pabort + * + * Params : r0 = address of aborted instruction + * + * Returns : r0 = address of abort + * : r1 = Simulated IFSR with section translation fault status + * + * Purpose : obtain information about current prefetch abort. + */ + + .align 5 +ENTRY(legacy_pabort) + mov r1, #5 + mov pc, lr +ENDPROC(legacy_pabort) diff --git a/arch/arm/mm/pabort-v6.S b/arch/arm/mm/pabort-v6.S new file mode 100644 index 00000000000..06e3d1ef211 --- /dev/null +++ b/arch/arm/mm/pabort-v6.S @@ -0,0 +1,19 @@ +#include +#include + +/* + * Function: v6_pabort + * + * Params : r0 = address of aborted instruction + * + * Returns : r0 = address of abort + * : r1 = IFSR + * + * Purpose : obtain information about current prefetch abort. + */ + + .align 5 +ENTRY(v6_pabort) + mrc p15, 0, r1, c5, c0, 1 @ get IFSR + mov pc, lr +ENDPROC(v6_pabort) diff --git a/arch/arm/mm/pabort-v7.S b/arch/arm/mm/pabort-v7.S new file mode 100644 index 00000000000..a8b3b300a18 --- /dev/null +++ b/arch/arm/mm/pabort-v7.S @@ -0,0 +1,20 @@ +#include +#include + +/* + * Function: v6_pabort + * + * Params : r0 = address of aborted instruction + * + * Returns : r0 = address of abort + * : r1 = IFSR + * + * Purpose : obtain information about current prefetch abort. + */ + + .align 5 +ENTRY(v7_pabort) + mrc p15, 0, r0, c6, c0, 2 @ get IFAR + mrc p15, 0, r1, c5, c0, 1 @ get IFSR + mov pc, lr +ENDPROC(v7_pabort) diff --git a/arch/arm/mm/proc-arm1020.S b/arch/arm/mm/proc-arm1020.S index b5551bf010a..d9fb4b98c49 100644 --- a/arch/arm/mm/proc-arm1020.S +++ b/arch/arm/mm/proc-arm1020.S @@ -449,7 +449,7 @@ arm1020_crval: .type arm1020_processor_functions, #object arm1020_processor_functions: .word v4t_early_abort - .word pabort_noifar + .word legacy_pabort .word cpu_arm1020_proc_init .word cpu_arm1020_proc_fin .word cpu_arm1020_reset diff --git a/arch/arm/mm/proc-arm1020e.S b/arch/arm/mm/proc-arm1020e.S index 8bc6740c29e..7453b75dcea 100644 --- a/arch/arm/mm/proc-arm1020e.S +++ b/arch/arm/mm/proc-arm1020e.S @@ -430,7 +430,7 @@ arm1020e_crval: .type arm1020e_processor_functions, #object arm1020e_processor_functions: .word v4t_early_abort - .word pabort_noifar + .word legacy_pabort .word cpu_arm1020e_proc_init .word cpu_arm1020e_proc_fin .word cpu_arm1020e_reset diff --git a/arch/arm/mm/proc-arm1022.S b/arch/arm/mm/proc-arm1022.S index 2cd03e66c0a..8eb72d75a8b 100644 --- a/arch/arm/mm/proc-arm1022.S +++ b/arch/arm/mm/proc-arm1022.S @@ -413,7 +413,7 @@ arm1022_crval: .type arm1022_processor_functions, #object arm1022_processor_functions: .word v4t_early_abort - .word pabort_noifar + .word legacy_pabort .word cpu_arm1022_proc_init .word cpu_arm1022_proc_fin .word cpu_arm1022_reset diff --git a/arch/arm/mm/proc-arm1026.S b/arch/arm/mm/proc-arm1026.S index ad961a897f6..3b59f0d6713 100644 --- a/arch/arm/mm/proc-arm1026.S +++ b/arch/arm/mm/proc-arm1026.S @@ -408,7 +408,7 @@ arm1026_crval: .type arm1026_processor_functions, #object arm1026_processor_functions: .word v5t_early_abort - .word pabort_noifar + .word legacy_pabort .word cpu_arm1026_proc_init .word cpu_arm1026_proc_fin .word cpu_arm1026_reset diff --git a/arch/arm/mm/proc-arm6_7.S b/arch/arm/mm/proc-arm6_7.S index 80d6e1de069..3f9cd3d8f6d 100644 --- a/arch/arm/mm/proc-arm6_7.S +++ b/arch/arm/mm/proc-arm6_7.S @@ -278,7 +278,7 @@ __arm7_setup: mov r0, #0 .type arm6_processor_functions, #object ENTRY(arm6_processor_functions) .word cpu_arm6_data_abort - .word pabort_noifar + .word legacy_pabort .word cpu_arm6_proc_init .word cpu_arm6_proc_fin .word cpu_arm6_reset @@ -295,7 +295,7 @@ ENTRY(arm6_processor_functions) .type arm7_processor_functions, #object ENTRY(arm7_processor_functions) .word cpu_arm7_data_abort - .word pabort_noifar + .word legacy_pabort .word cpu_arm7_proc_init .word cpu_arm7_proc_fin .word cpu_arm7_reset diff --git a/arch/arm/mm/proc-arm720.S b/arch/arm/mm/proc-arm720.S index 85ae18695f1..0b62de24466 100644 --- a/arch/arm/mm/proc-arm720.S +++ b/arch/arm/mm/proc-arm720.S @@ -181,7 +181,7 @@ arm720_crval: .type arm720_processor_functions, #object ENTRY(arm720_processor_functions) .word v4t_late_abort - .word pabort_noifar + .word legacy_pabort .word cpu_arm720_proc_init .word cpu_arm720_proc_fin .word cpu_arm720_reset diff --git a/arch/arm/mm/proc-arm740.S b/arch/arm/mm/proc-arm740.S index 4f95bee63e9..01860cdeb2e 100644 --- a/arch/arm/mm/proc-arm740.S +++ b/arch/arm/mm/proc-arm740.S @@ -126,7 +126,7 @@ __arm740_setup: .type arm740_processor_functions, #object ENTRY(arm740_processor_functions) .word v4t_late_abort - .word pabort_noifar + .word legacy_pabort .word cpu_arm740_proc_init .word cpu_arm740_proc_fin .word cpu_arm740_reset diff --git a/arch/arm/mm/proc-arm7tdmi.S b/arch/arm/mm/proc-arm7tdmi.S index 93e05fa7bed..1201b986382 100644 --- a/arch/arm/mm/proc-arm7tdmi.S +++ b/arch/arm/mm/proc-arm7tdmi.S @@ -64,7 +64,7 @@ __arm7tdmi_setup: .type arm7tdmi_processor_functions, #object ENTRY(arm7tdmi_processor_functions) .word v4t_late_abort - .word pabort_noifar + .word legacy_pabort .word cpu_arm7tdmi_proc_init .word cpu_arm7tdmi_proc_fin .word cpu_arm7tdmi_reset diff --git a/arch/arm/mm/proc-arm920.S b/arch/arm/mm/proc-arm920.S index 914d688394f..2b7c197cc58 100644 --- a/arch/arm/mm/proc-arm920.S +++ b/arch/arm/mm/proc-arm920.S @@ -395,7 +395,7 @@ arm920_crval: .type arm920_processor_functions, #object arm920_processor_functions: .word v4t_early_abort - .word pabort_noifar + .word legacy_pabort .word cpu_arm920_proc_init .word cpu_arm920_proc_fin .word cpu_arm920_reset diff --git a/arch/arm/mm/proc-arm922.S b/arch/arm/mm/proc-arm922.S index 51c9c9859e5..06a1aa4e339 100644 --- a/arch/arm/mm/proc-arm922.S +++ b/arch/arm/mm/proc-arm922.S @@ -399,7 +399,7 @@ arm922_crval: .type arm922_processor_functions, #object arm922_processor_functions: .word v4t_early_abort - .word pabort_noifar + .word legacy_pabort .word cpu_arm922_proc_init .word cpu_arm922_proc_fin .word cpu_arm922_reset diff --git a/arch/arm/mm/proc-arm925.S b/arch/arm/mm/proc-arm925.S index 2724526d89c..cb53435a85a 100644 --- a/arch/arm/mm/proc-arm925.S +++ b/arch/arm/mm/proc-arm925.S @@ -462,7 +462,7 @@ arm925_crval: .type arm925_processor_functions, #object arm925_processor_functions: .word v4t_early_abort - .word pabort_noifar + .word legacy_pabort .word cpu_arm925_proc_init .word cpu_arm925_proc_fin .word cpu_arm925_reset diff --git a/arch/arm/mm/proc-arm926.S b/arch/arm/mm/proc-arm926.S index 54466937bff..1c4848704bb 100644 --- a/arch/arm/mm/proc-arm926.S +++ b/arch/arm/mm/proc-arm926.S @@ -415,7 +415,7 @@ arm926_crval: .type arm926_processor_functions, #object arm926_processor_functions: .word v5tj_early_abort - .word pabort_noifar + .word legacy_pabort .word cpu_arm926_proc_init .word cpu_arm926_proc_fin .word cpu_arm926_reset diff --git a/arch/arm/mm/proc-arm940.S b/arch/arm/mm/proc-arm940.S index f595117caf5..5b0f8464c8f 100644 --- a/arch/arm/mm/proc-arm940.S +++ b/arch/arm/mm/proc-arm940.S @@ -322,7 +322,7 @@ __arm940_setup: .type arm940_processor_functions, #object ENTRY(arm940_processor_functions) .word nommu_early_abort - .word pabort_noifar + .word legacy_pabort .word cpu_arm940_proc_init .word cpu_arm940_proc_fin .word cpu_arm940_reset diff --git a/arch/arm/mm/proc-arm946.S b/arch/arm/mm/proc-arm946.S index e03f6ff1fb2..40c0449a139 100644 --- a/arch/arm/mm/proc-arm946.S +++ b/arch/arm/mm/proc-arm946.S @@ -377,7 +377,7 @@ __arm946_setup: .type arm946_processor_functions, #object ENTRY(arm946_processor_functions) .word nommu_early_abort - .word pabort_noifar + .word legacy_pabort .word cpu_arm946_proc_init .word cpu_arm946_proc_fin .word cpu_arm946_reset diff --git a/arch/arm/mm/proc-arm9tdmi.S b/arch/arm/mm/proc-arm9tdmi.S index be6c11d2b3f..28545c29dbc 100644 --- a/arch/arm/mm/proc-arm9tdmi.S +++ b/arch/arm/mm/proc-arm9tdmi.S @@ -64,7 +64,7 @@ __arm9tdmi_setup: .type arm9tdmi_processor_functions, #object ENTRY(arm9tdmi_processor_functions) .word nommu_early_abort - .word pabort_noifar + .word legacy_pabort .word cpu_arm9tdmi_proc_init .word cpu_arm9tdmi_proc_fin .word cpu_arm9tdmi_reset diff --git a/arch/arm/mm/proc-fa526.S b/arch/arm/mm/proc-fa526.S index 08b8a955d5d..08f5ac237ad 100644 --- a/arch/arm/mm/proc-fa526.S +++ b/arch/arm/mm/proc-fa526.S @@ -191,7 +191,7 @@ fa526_cr1_set: .type fa526_processor_functions, #object fa526_processor_functions: .word v4_early_abort - .word pabort_noifar + .word legacy_pabort .word cpu_fa526_proc_init .word cpu_fa526_proc_fin .word cpu_fa526_reset diff --git a/arch/arm/mm/proc-feroceon.S b/arch/arm/mm/proc-feroceon.S index 0fe1f8fc348..d0d7795200f 100644 --- a/arch/arm/mm/proc-feroceon.S +++ b/arch/arm/mm/proc-feroceon.S @@ -499,7 +499,7 @@ feroceon_crval: .type feroceon_processor_functions, #object feroceon_processor_functions: .word v5t_early_abort - .word pabort_noifar + .word legacy_pabort .word cpu_feroceon_proc_init .word cpu_feroceon_proc_fin .word cpu_feroceon_reset diff --git a/arch/arm/mm/proc-mohawk.S b/arch/arm/mm/proc-mohawk.S index 540f5078496..52b5fd74fbb 100644 --- a/arch/arm/mm/proc-mohawk.S +++ b/arch/arm/mm/proc-mohawk.S @@ -359,7 +359,7 @@ mohawk_crval: .type mohawk_processor_functions, #object mohawk_processor_functions: .word v5t_early_abort - .word pabort_noifar + .word legacy_pabort .word cpu_mohawk_proc_init .word cpu_mohawk_proc_fin .word cpu_mohawk_reset diff --git a/arch/arm/mm/proc-sa110.S b/arch/arm/mm/proc-sa110.S index 90a7e5279f2..7b706b38990 100644 --- a/arch/arm/mm/proc-sa110.S +++ b/arch/arm/mm/proc-sa110.S @@ -199,7 +199,7 @@ sa110_crval: .type sa110_processor_functions, #object ENTRY(sa110_processor_functions) .word v4_early_abort - .word pabort_noifar + .word legacy_pabort .word cpu_sa110_proc_init .word cpu_sa110_proc_fin .word cpu_sa110_reset diff --git a/arch/arm/mm/proc-sa1100.S b/arch/arm/mm/proc-sa1100.S index 451e2d953e2..ee7700242c1 100644 --- a/arch/arm/mm/proc-sa1100.S +++ b/arch/arm/mm/proc-sa1100.S @@ -214,7 +214,7 @@ sa1100_crval: .type sa1100_processor_functions, #object ENTRY(sa1100_processor_functions) .word v4_early_abort - .word pabort_noifar + .word legacy_pabort .word cpu_sa1100_proc_init .word cpu_sa1100_proc_fin .word cpu_sa1100_reset diff --git a/arch/arm/mm/proc-v6.S b/arch/arm/mm/proc-v6.S index 524ddae9259..194737d60a2 100644 --- a/arch/arm/mm/proc-v6.S +++ b/arch/arm/mm/proc-v6.S @@ -191,7 +191,7 @@ v6_crval: .type v6_processor_functions, #object ENTRY(v6_processor_functions) .word v6_early_abort - .word pabort_noifar + .word v6_pabort .word cpu_v6_proc_init .word cpu_v6_proc_fin .word cpu_v6_reset diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S index f3fa1c32fe9..23ebcf6eab9 100644 --- a/arch/arm/mm/proc-v7.S +++ b/arch/arm/mm/proc-v7.S @@ -295,7 +295,7 @@ __v7_setup_stack: .type v7_processor_functions, #object ENTRY(v7_processor_functions) .word v7_early_abort - .word pabort_ifar + .word v7_pabort .word cpu_v7_proc_init .word cpu_v7_proc_fin .word cpu_v7_reset diff --git a/arch/arm/mm/proc-xsc3.S b/arch/arm/mm/proc-xsc3.S index 33515c214b9..2028f370288 100644 --- a/arch/arm/mm/proc-xsc3.S +++ b/arch/arm/mm/proc-xsc3.S @@ -428,7 +428,7 @@ xsc3_crval: .type xsc3_processor_functions, #object ENTRY(xsc3_processor_functions) .word v5t_early_abort - .word pabort_noifar + .word legacy_pabort .word cpu_xsc3_proc_init .word cpu_xsc3_proc_fin .word cpu_xsc3_reset diff --git a/arch/arm/mm/proc-xscale.S b/arch/arm/mm/proc-xscale.S index 423394260bc..f056c283682 100644 --- a/arch/arm/mm/proc-xscale.S +++ b/arch/arm/mm/proc-xscale.S @@ -511,7 +511,7 @@ xscale_crval: .type xscale_processor_functions, #object ENTRY(xscale_processor_functions) .word v5t_early_abort - .word pabort_noifar + .word legacy_pabort .word cpu_xscale_proc_init .word cpu_xscale_proc_fin .word cpu_xscale_reset -- cgit v1.2.3-70-g09d2 From d25ef8b86e6a58f5476bf6e4a8da730b335f68fa Mon Sep 17 00:00:00 2001 From: "Kirill A. Shutemov" Date: Fri, 25 Sep 2009 13:40:49 +0100 Subject: ARM: 5728/1: Proper prefetch abort handling on ARMv6 and ARMv7 Currently, on ARMv6 and ARMv7, if an application tries to execute code (or garbage) on non-executable page it hangs. It caused by incorrect prefetch abort handling. Now every prefetch abort processes as a translation fault. To fix this we have to analyze instruction fault status register to figure out reason why we've got the abort and process it accordingly. To make IFSR different from DFSR we set bit 31 which is reserved in both IFSR and DFSR. This patch also tries to protect from future hangs on unexpected exceptions. An application will be killed if unexpected exception type was received. Signed-off-by: Kirill A. Shutemov Signed-off-by: Russell King --- arch/arm/mm/fault.c | 51 ++++++++++++++++++++++++++++++++++++++++++++++++++- 1 file changed, 50 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mm/fault.c b/arch/arm/mm/fault.c index fd2375f8499..ae0e25f5a70 100644 --- a/arch/arm/mm/fault.c +++ b/arch/arm/mm/fault.c @@ -519,9 +519,58 @@ do_DataAbort(unsigned long addr, unsigned int fsr, struct pt_regs *regs) arm_notify_die("", regs, &info, fsr, 0); } + +static struct fsr_info ifsr_info[] = { + { do_bad, SIGBUS, 0, "unknown 0" }, + { do_bad, SIGBUS, 0, "unknown 1" }, + { do_bad, SIGBUS, 0, "debug event" }, + { do_bad, SIGSEGV, SEGV_ACCERR, "section access flag fault" }, + { do_bad, SIGBUS, 0, "unknown 4" }, + { do_translation_fault, SIGSEGV, SEGV_MAPERR, "section translation fault" }, + { do_bad, SIGSEGV, SEGV_ACCERR, "page access flag fault" }, + { do_page_fault, SIGSEGV, SEGV_MAPERR, "page translation fault" }, + { do_bad, SIGBUS, 0, "external abort on non-linefetch" }, + { do_bad, SIGSEGV, SEGV_ACCERR, "section domain fault" }, + { do_bad, SIGBUS, 0, "unknown 10" }, + { do_bad, SIGSEGV, SEGV_ACCERR, "page domain fault" }, + { do_bad, SIGBUS, 0, "external abort on translation" }, + { do_sect_fault, SIGSEGV, SEGV_ACCERR, "section permission fault" }, + { do_bad, SIGBUS, 0, "external abort on translation" }, + { do_page_fault, SIGSEGV, SEGV_ACCERR, "page permission fault" }, + { do_bad, SIGBUS, 0, "unknown 16" }, + { do_bad, SIGBUS, 0, "unknown 17" }, + { do_bad, SIGBUS, 0, "unknown 18" }, + { do_bad, SIGBUS, 0, "unknown 19" }, + { do_bad, SIGBUS, 0, "unknown 20" }, + { do_bad, SIGBUS, 0, "unknown 21" }, + { do_bad, SIGBUS, 0, "unknown 22" }, + { do_bad, SIGBUS, 0, "unknown 23" }, + { do_bad, SIGBUS, 0, "unknown 24" }, + { do_bad, SIGBUS, 0, "unknown 25" }, + { do_bad, SIGBUS, 0, "unknown 26" }, + { do_bad, SIGBUS, 0, "unknown 27" }, + { do_bad, SIGBUS, 0, "unknown 28" }, + { do_bad, SIGBUS, 0, "unknown 29" }, + { do_bad, SIGBUS, 0, "unknown 30" }, + { do_bad, SIGBUS, 0, "unknown 31" }, +}; + asmlinkage void __exception do_PrefetchAbort(unsigned long addr, unsigned int ifsr, struct pt_regs *regs) { - do_translation_fault(addr, FSR_LNX_PF, regs); + const struct fsr_info *inf = ifsr_info + fsr_fs(ifsr); + struct siginfo info; + + if (!inf->fn(addr, ifsr | FSR_LNX_PF, regs)) + return; + + printk(KERN_ALERT "Unhandled prefetch abort: %s (0x%03x) at 0x%08lx\n", + inf->name, ifsr, addr); + + info.si_signo = inf->sig; + info.si_errno = 0; + info.si_code = inf->code; + info.si_addr = (void __user *)addr; + arm_notify_die("", regs, &info, ifsr, 0); } -- cgit v1.2.3-70-g09d2 From 2cff5e1a83c61613febf814640dc877b98d585e6 Mon Sep 17 00:00:00 2001 From: Hirokazu Takata Date: Tue, 11 Aug 2009 23:12:41 +0900 Subject: m32r: fix tme_handler Fix pmd_bad check code of tme_handler (TLB Miss Exception handler). The correct _KERNPG_TABLE value is not 0x263(=611) but 0x163. Signed-off-by: Hirokazu Takata --- arch/m32r/mm/mmu.S | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/m32r/mm/mmu.S b/arch/m32r/mm/mmu.S index 49a6d16a3d5..e9491a5ae82 100644 --- a/arch/m32r/mm/mmu.S +++ b/arch/m32r/mm/mmu.S @@ -150,9 +150,13 @@ ENTRY(tme_handler) ; pmd = pmd_offset(pgd, address); ld r3, @r3 ; r3: pmd data - ldi r2, #-4096 beqz r3, 3f ; pmd_none(*pmd) ? + and3 r2, r3, #0xfff + add3 r2, r2, #-355 ; _KERNPG_TABLE(=0x163) + bnez r2, 3f ; pmd_bad(*pmd) ? + ldi r2, #-4096 + ; pte = pte_offset(pmd, address); and r2, r3 ; r2: pte base addr srl3 r3, r0, #10 @@ -263,9 +267,9 @@ ENTRY(tme_handler) ld r1, @r3 ; r1: pmd beqz r1, 3f ; pmd_none(*pmd) ? ; - and3 r1, r1, #0xeff - ldi r4, #611 ; _KERNPG_TABLE(=611) - bne r1, r4, 3f ; !pmd_bad(*pmd) ? + and3 r1, r1, #0x3ff + ldi r4, #0x163 ; _KERNPG_TABLE(=0x163) + bne r1, r4, 3f ; pmd_bad(*pmd) ? .fillinsn 4: -- cgit v1.2.3-70-g09d2 From ced0f005c7b0a7e751b2d15ea502a7654ddb3630 Mon Sep 17 00:00:00 2001 From: Hirokazu Takata Date: Wed, 26 Aug 2009 13:09:12 +0900 Subject: m32r: export delay loop symbols - Move EXPORT_SYMBOL lines of delay loop functions from arch/m32r/kernel/m32r_ksyms.c to arch/m32r/lib/delay.c. - Export __ndelay. Signed-off-by: Hirokazu Takata --- arch/m32r/kernel/m32r_ksyms.c | 6 ------ arch/m32r/lib/delay.c | 4 ++++ 2 files changed, 4 insertions(+), 6 deletions(-) (limited to 'arch') diff --git a/arch/m32r/kernel/m32r_ksyms.c b/arch/m32r/kernel/m32r_ksyms.c index 22624b51d4d..700570747a9 100644 --- a/arch/m32r/kernel/m32r_ksyms.c +++ b/arch/m32r/kernel/m32r_ksyms.c @@ -23,12 +23,6 @@ EXPORT_SYMBOL(__ioremap); EXPORT_SYMBOL(iounmap); EXPORT_SYMBOL(kernel_thread); -/* Networking helper routines. */ -/* Delay loops */ -EXPORT_SYMBOL(__udelay); -EXPORT_SYMBOL(__delay); -EXPORT_SYMBOL(__const_udelay); - EXPORT_SYMBOL(strncpy_from_user); EXPORT_SYMBOL(__strncpy_from_user); EXPORT_SYMBOL(clear_user); diff --git a/arch/m32r/lib/delay.c b/arch/m32r/lib/delay.c index ced549be80f..940f4837e42 100644 --- a/arch/m32r/lib/delay.c +++ b/arch/m32r/lib/delay.c @@ -122,4 +122,8 @@ void __ndelay(unsigned long nsecs) { __const_udelay(nsecs * 0x00005); /* 2**32 / 1000000000 (rounded up) */ } + +EXPORT_SYMBOL(__delay); +EXPORT_SYMBOL(__const_udelay); +EXPORT_SYMBOL(__udelay); EXPORT_SYMBOL(__ndelay); -- cgit v1.2.3-70-g09d2 From d2c5821c5de08175096f17166984d5e738cad024 Mon Sep 17 00:00:00 2001 From: Hirokazu Takata Date: Wed, 26 Aug 2009 13:04:33 +0900 Subject: m32r: define ioread* and iowrite* macros Define ioread* and iowrite* macros to fix the following build errors: CC [M] drivers/uio/uio_smx.o drivers/uio/uio_smx.c: In function 'smx_handler': drivers/uio/uio_smx.c:31: error: implicit declaration of function 'ioread32' drivers/uio/uio_smx.c:37: error: implicit declaration of function 'iowrite32' Signed-off-by: Hirokazu Takata --- arch/m32r/include/asm/io.h | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'arch') diff --git a/arch/m32r/include/asm/io.h b/arch/m32r/include/asm/io.h index d06933bd631..4010f1fc5b6 100644 --- a/arch/m32r/include/asm/io.h +++ b/arch/m32r/include/asm/io.h @@ -162,6 +162,13 @@ static inline void _writel(unsigned long l, unsigned long addr) #define __raw_writew writew #define __raw_writel writel +#define ioread8 read +#define ioread16 readw +#define ioread32 readl +#define iowrite8 writeb +#define iowrite16 writew +#define iowrite32 writel + #define mmiowb() #define flush_write_buffers() do { } while (0) /* M32R_FIXME */ -- cgit v1.2.3-70-g09d2 From bac33bd571a9c2969efb52dd02c5407fbc49c360 Mon Sep 17 00:00:00 2001 From: Hirokazu Takata Date: Wed, 26 Aug 2009 13:13:12 +0900 Subject: m32r: add rtc_lock variable Add a spinlock variable "rtc_lock". This is taken from arch/arm/kernel/time.c. Signed-off-by: Hirokazu Takata --- arch/m32r/kernel/time.c | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'arch') diff --git a/arch/m32r/kernel/time.c b/arch/m32r/kernel/time.c index ba61c4c7320..e7fee0f198d 100644 --- a/arch/m32r/kernel/time.c +++ b/arch/m32r/kernel/time.c @@ -33,6 +33,15 @@ #include +#if defined(CONFIG_RTC_DRV_CMOS) || defined(CONFIG_RTC_DRV_CMOS_MODULE) +/* this needs a better home */ +DEFINE_SPINLOCK(rtc_lock); + +#ifdef CONFIG_RTC_DRV_CMOS_MODULE +EXPORT_SYMBOL(rtc_lock); +#endif +#endif /* pc-style 'CMOS' RTC support */ + #ifdef CONFIG_SMP extern void smp_local_timer_interrupt(void); #endif -- cgit v1.2.3-70-g09d2 From 6b6fabce5ac47668a2c2d9a14f1cdcc23c4ed896 Mon Sep 17 00:00:00 2001 From: Hirokazu Takata Date: Wed, 23 Sep 2009 21:37:06 +0900 Subject: m32r: Fix set_memory() for DISCONTIGMEM In case CONFIG_DISCONTIGMEM is set, the memory size of system was always determined by CONFIG_MEMORY_SIZE and was not changeable. This patch fixes set_memory() of arch/m32r/mm/discontig.c so that we can specify memory size by the "mem=" kernel parameter. Signed-off-by: Hirokazu Takata --- arch/m32r/mm/discontig.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/m32r/mm/discontig.c b/arch/m32r/mm/discontig.c index b7a78ad429b..5d2858f6eed 100644 --- a/arch/m32r/mm/discontig.c +++ b/arch/m32r/mm/discontig.c @@ -32,6 +32,9 @@ typedef struct { } mem_prof_t; static mem_prof_t mem_prof[MAX_NUMNODES]; +extern unsigned long memory_start; +extern unsigned long memory_end; + static void __init mem_prof_init(void) { unsigned long start_pfn, holes, free_pfn; @@ -42,7 +45,7 @@ static void __init mem_prof_init(void) /* Node#0 SDRAM */ mp = &mem_prof[0]; mp->start_pfn = PFN_UP(CONFIG_MEMORY_START); - mp->pages = PFN_DOWN(CONFIG_MEMORY_SIZE); + mp->pages = PFN_DOWN(memory_end - memory_start); mp->holes = 0; mp->free_pfn = PFN_UP(__pa(_end)); -- cgit v1.2.3-70-g09d2 From 0a3d31b79e7fa600108e699805e2b2f9ea1f3194 Mon Sep 17 00:00:00 2001 From: Toshihiro HANAWA Date: Fri, 2 Oct 2009 17:52:54 +0900 Subject: m32r: Fix IPI function calls for SMP This patch fixes the m32r SMP kernel after 2.6.27. A part of the following patch breaks m32r SMP operation. > m32r: convert to generic helpers for IPI function calls > commit 7b7426c8a615cf61df9a77b9df7d5b75d91e3fa0 In the above patch, a CALL_FUNC_SINGLE_IPI was newly introduced, but the its IPI vector number was wrong in the patch code. The m32r SMP kernel hanged-up during boot operation, because the CPU_BOOT_IPI was called instead of CALL_FUNC_SINGLE_IPI (CPU_BOOT_IPI had no side effect at that time because the 2nd core had already been started up), as a result, csd_unlock() was not called, then a dead lock occurred in csd_lock_wait() after the detection of Compact Flash memory as IDE generic disk. Signed-off-by: Toshihiro HANAWA Signed-off-by: Hirokazu Takata --- arch/m32r/kernel/traps.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/m32r/kernel/traps.c b/arch/m32r/kernel/traps.c index 03b14e55cd8..fbd109031df 100644 --- a/arch/m32r/kernel/traps.c +++ b/arch/m32r/kernel/traps.c @@ -104,8 +104,8 @@ static void set_eit_vector_entries(void) eit_vector[186] = (unsigned long)smp_call_function_interrupt; eit_vector[187] = (unsigned long)smp_ipi_timer_interrupt; eit_vector[188] = (unsigned long)smp_flush_cache_all_interrupt; - eit_vector[189] = (unsigned long)smp_call_function_single_interrupt; - eit_vector[190] = 0; + eit_vector[189] = 0; /* CPU_BOOT_IPI */ + eit_vector[190] = (unsigned long)smp_call_function_single_interrupt; eit_vector[191] = 0; #endif _flush_cache_copyback_all(); -- cgit v1.2.3-70-g09d2