From c14e522b1aab6a1a3765db182aacca4f359f6d91 Mon Sep 17 00:00:00 2001 From: Sebastian Andrzej Siewior Date: Wed, 16 Dec 2009 23:13:44 +0100 Subject: tree wide: remove execute flag from .c files Signed-off-by: Sebastian Andrzej Siewior Signed-off-by: Jiri Kosina --- arch/arm/mach-omap2/board-3630sdp.c | 0 arch/arm/mach-omap2/board-zoom-peripherals.c | 0 2 files changed, 0 insertions(+), 0 deletions(-) mode change 100755 => 100644 arch/arm/mach-omap2/board-3630sdp.c mode change 100755 => 100644 arch/arm/mach-omap2/board-zoom-peripherals.c (limited to 'arch') diff --git a/arch/arm/mach-omap2/board-3630sdp.c b/arch/arm/mach-omap2/board-3630sdp.c old mode 100755 new mode 100644 diff --git a/arch/arm/mach-omap2/board-zoom-peripherals.c b/arch/arm/mach-omap2/board-zoom-peripherals.c old mode 100755 new mode 100644 -- cgit v1.2.3-70-g09d2 From 5d93a14241bf5ba299422440bc366ec43970c002 Mon Sep 17 00:00:00 2001 From: Shaun Patterson Date: Sat, 5 Dec 2009 22:30:52 -0500 Subject: vmiclock: fix comment spelling mistake Signed-off-by: Shaun Patterson Signed-off-by: Jiri Kosina --- arch/x86/kernel/vmiclock_32.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/x86/kernel/vmiclock_32.c b/arch/x86/kernel/vmiclock_32.c index 74c92bb194d..25bbb9bfc31 100644 --- a/arch/x86/kernel/vmiclock_32.c +++ b/arch/x86/kernel/vmiclock_32.c @@ -171,7 +171,7 @@ static int vmi_timer_next_event(unsigned long delta, { /* Unfortunately, set_next_event interface only passes relative * expiry, but we want absolute expiry. It'd be better if were - * were passed an aboslute expiry, since a bunch of time may + * were passed an absolute expiry, since a bunch of time may * have been stolen between the time the delta is computed and * when we set the alarm below. */ cycle_t now = vmi_timer_ops.get_cycle_counter(vmi_counter(VMI_ONESHOT)); -- cgit v1.2.3-70-g09d2 From e34b7005e5f55a55964c13ec9784e8e2b427a83c Mon Sep 17 00:00:00 2001 From: Jasper Spaans Date: Fri, 20 Nov 2009 14:20:05 +0100 Subject: arch/x86/kernel/apic/apic_flat_64.c: Make comment match the code Make the comment match the code, this also holds for intel systems, according to probe_64.c in the same directory. Signed-off-by: Jasper Spaans Signed-off-by: Jiri Kosina --- arch/x86/kernel/apic/apic_flat_64.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/x86/kernel/apic/apic_flat_64.c b/arch/x86/kernel/apic/apic_flat_64.c index e3c3d820c32..09d3b17ce0c 100644 --- a/arch/x86/kernel/apic/apic_flat_64.c +++ b/arch/x86/kernel/apic/apic_flat_64.c @@ -223,7 +223,7 @@ struct apic apic_flat = { }; /* - * Physflat mode is used when there are more than 8 CPUs on a AMD system. + * Physflat mode is used when there are more than 8 CPUs on a system. * We cannot use logical delivery in this case because the mask * overflows, so use physical mode. */ -- cgit v1.2.3-70-g09d2 From 634bad68bc25753816594ecd390dcea980528315 Mon Sep 17 00:00:00 2001 From: Adam Buchbinder Date: Fri, 18 Dec 2009 15:40:41 -0500 Subject: Fix misspelling of "successful" and variants in comments. Some comments misspell "successful" or variants of the word; this fixes them. No code changes. Signed-off-by: Adam Buchbinder Signed-off-by: Jiri Kosina --- arch/arm/mach-s5pc100/setup-sdhci.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-s5pc100/setup-sdhci.c b/arch/arm/mach-s5pc100/setup-sdhci.c index 4385986a3da..ea7ff19adb9 100644 --- a/arch/arm/mach-s5pc100/setup-sdhci.c +++ b/arch/arm/mach-s5pc100/setup-sdhci.c @@ -28,8 +28,8 @@ char *s5pc100_hsmmc_clksrcs[4] = { [0] = "hsmmc", [1] = "hsmmc", - /* [2] = "mmc_bus", not yet succesfuuly used yet */ - /* [3] = "48m", - note not succesfully used yet */ + /* [2] = "mmc_bus", not yet successfully used yet */ + /* [3] = "48m", - note not successfully used yet */ }; -- cgit v1.2.3-70-g09d2 From c9404c9c392d557a4687c4cbda022b03cb787ce9 Mon Sep 17 00:00:00 2001 From: Adam Buchbinder Date: Fri, 18 Dec 2009 15:40:42 -0500 Subject: Fix misspelling of "should" and "shouldn't" in comments. Some comments misspell "should" or "shouldn't"; this fixes them. No code changes. Signed-off-by: Adam Buchbinder Signed-off-by: Jiri Kosina --- arch/x86/kernel/ptrace.c | 2 +- drivers/ata/libata-core.c | 2 +- drivers/gpu/drm/radeon/atombios.h | 2 +- drivers/ieee1394/pcilynx.c | 2 +- drivers/input/tablet/aiptek.c | 2 +- drivers/mmc/card/sdio_uart.c | 2 +- drivers/scsi/lpfc/lpfc_scsi.c | 4 ++-- drivers/video/sstfb.c | 2 +- fs/locks.c | 2 +- kernel/audit.c | 2 +- mm/slub.c | 2 +- 11 files changed, 12 insertions(+), 12 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/ptrace.c b/arch/x86/kernel/ptrace.c index 017d937639f..118428085ea 100644 --- a/arch/x86/kernel/ptrace.c +++ b/arch/x86/kernel/ptrace.c @@ -604,7 +604,7 @@ ptrace_modify_breakpoint(struct perf_event *bp, int len, int type, struct perf_event_attr attr; /* - * We shoud have at least an inactive breakpoint at this + * We should have at least an inactive breakpoint at this * slot. It means the user is writing dr7 without having * written the address register first */ diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index 6728328f3be..698ef474767 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -2232,7 +2232,7 @@ retry: * Some drives were very specific about that exact sequence. * * Note that ATA4 says lba is mandatory so the second check - * shoud never trigger. + * should never trigger. */ if (ata_id_major_version(id) < 4 || !ata_id_has_lba(id)) { err_mask = ata_dev_init_params(dev, id[3], id[6]); diff --git a/drivers/gpu/drm/radeon/atombios.h b/drivers/gpu/drm/radeon/atombios.h index 91ad0d1c1b1..2a88029f6a1 100644 --- a/drivers/gpu/drm/radeon/atombios.h +++ b/drivers/gpu/drm/radeon/atombios.h @@ -2275,7 +2275,7 @@ typedef struct _ATOM_LCD_RTS_RECORD { UCHAR ucRTSValue; } ATOM_LCD_RTS_RECORD; -/* !! If the record below exits, it shoud always be the first record for easy use in command table!!! */ +/* !! If the record below exits, it should always be the first record for easy use in command table!!! */ typedef struct _ATOM_LCD_MODE_CONTROL_CAP { UCHAR ucRecordType; USHORT usLCDCap; diff --git a/drivers/ieee1394/pcilynx.c b/drivers/ieee1394/pcilynx.c index 9555fd25386..bf47fee7980 100644 --- a/drivers/ieee1394/pcilynx.c +++ b/drivers/ieee1394/pcilynx.c @@ -1452,7 +1452,7 @@ static int __devinit add_card(struct pci_dev *dev, PRINT(KERN_ERR, lynx->id, "unable to read bus info block from i2c"); } else { PRINT(KERN_INFO, lynx->id, "got bus info block from serial eeprom"); - /* FIXME: probably we shoud rewrite the max_rec, max_ROM(1394a), + /* FIXME: probably we should rewrite the max_rec, max_ROM(1394a), * generation(1394a) and link_spd(1394a) field and recalculate * the CRC */ diff --git a/drivers/input/tablet/aiptek.c b/drivers/input/tablet/aiptek.c index 7d005a3616d..4be039d7dca 100644 --- a/drivers/input/tablet/aiptek.c +++ b/drivers/input/tablet/aiptek.c @@ -362,7 +362,7 @@ static const int macroKeyEvents[] = { }; /*********************************************************************** - * Map values to strings and back. Every map shoudl have the following + * Map values to strings and back. Every map should have the following * as its last element: { NULL, AIPTEK_INVALID_VALUE }. */ #define AIPTEK_INVALID_VALUE -1 diff --git a/drivers/mmc/card/sdio_uart.c b/drivers/mmc/card/sdio_uart.c index f53755533e7..a4e37758be4 100644 --- a/drivers/mmc/card/sdio_uart.c +++ b/drivers/mmc/card/sdio_uart.c @@ -581,7 +581,7 @@ static int uart_carrier_raised(struct tty_port *tport) struct sdio_uart_port *port = container_of(tport, struct sdio_uart_port, port); unsigned int ret = sdio_uart_claim_func(port); - if (ret) /* Missing hardware shoudn't block for carrier */ + if (ret) /* Missing hardware shouldn't block for carrier */ return 1; ret = sdio_uart_get_mctrl(port); sdio_uart_release_func(port); diff --git a/drivers/scsi/lpfc/lpfc_scsi.c b/drivers/scsi/lpfc/lpfc_scsi.c index a246410ce9d..28c6bfd3e82 100644 --- a/drivers/scsi/lpfc/lpfc_scsi.c +++ b/drivers/scsi/lpfc/lpfc_scsi.c @@ -1574,7 +1574,7 @@ lpfc_bg_scsi_prep_dma_buf(struct lpfc_hba *phba, case LPFC_PG_TYPE_NO_DIF: num_bde = lpfc_bg_setup_bpl(phba, scsi_cmnd, bpl, datasegcnt); - /* we shoud have 2 or more entries in buffer list */ + /* we should have 2 or more entries in buffer list */ if (num_bde < 2) goto err; break; @@ -1611,7 +1611,7 @@ lpfc_bg_scsi_prep_dma_buf(struct lpfc_hba *phba, num_bde = lpfc_bg_setup_bpl_prot(phba, scsi_cmnd, bpl, datasegcnt, protsegcnt); - /* we shoud have 3 or more entries in buffer list */ + /* we should have 3 or more entries in buffer list */ if (num_bde < 3) goto err; break; diff --git a/drivers/video/sstfb.c b/drivers/video/sstfb.c index 609d0a521ca..79840f11fec 100644 --- a/drivers/video/sstfb.c +++ b/drivers/video/sstfb.c @@ -1102,7 +1102,7 @@ static void sst_set_vidmod_ics(struct fb_info *info, const int bpp) * detect dac type * prerequisite : write to FbiInitx enabled, video and fbi and pci fifo reset, * dram refresh disabled, FbiInit remaped. - * TODO: mmh.. maybe i shoud put the "prerequisite" in the func ... + * TODO: mmh.. maybe i should put the "prerequisite" in the func ... */ diff --git a/fs/locks.c b/fs/locks.c index a8794f233bc..cde572db112 100644 --- a/fs/locks.c +++ b/fs/locks.c @@ -1454,7 +1454,7 @@ EXPORT_SYMBOL(generic_setlease); * leases held by processes on this node. * * There is also no break_lease method; filesystems that - * handle their own leases shoud break leases themselves from the + * handle their own leases should break leases themselves from the * filesystem's open, create, and (on truncate) setattr methods. * * Warning: the only current setlease methods exist only to disable diff --git a/kernel/audit.c b/kernel/audit.c index 5feed232be9..78f7f86aa23 100644 --- a/kernel/audit.c +++ b/kernel/audit.c @@ -398,7 +398,7 @@ static void kauditd_send_skb(struct sk_buff *skb) skb_get(skb); err = netlink_unicast(audit_sock, skb, audit_nlk_pid, 0); if (err < 0) { - BUG_ON(err != -ECONNREFUSED); /* Shoudn't happen */ + BUG_ON(err != -ECONNREFUSED); /* Shouldn't happen */ printk(KERN_ERR "audit: *NO* daemon at audit_pid=%d\n", audit_pid); audit_log_lost("auditd dissapeared\n"); audit_pid = 0; diff --git a/mm/slub.c b/mm/slub.c index 8d71aaf888d..00e0961b11f 100644 --- a/mm/slub.c +++ b/mm/slub.c @@ -3086,7 +3086,7 @@ static void slab_mem_offline_callback(void *arg) /* * if n->nr_slabs > 0, slabs still exist on the node * that is going down. We were unable to free them, - * and offline_pages() function shoudn't call this + * and offline_pages() function shouldn't call this * callback. So, we must fail. */ BUG_ON(slabs_node(s, offline_node)); -- cgit v1.2.3-70-g09d2 From 71709247aa852b5c4a01e70a9186590800d15575 Mon Sep 17 00:00:00 2001 From: "Robert P. J. Day" Date: Mon, 28 Dec 2009 11:50:29 -0500 Subject: xen: Fix misspelled CONFIG variable in comment. Signed-off-by: Robert P. J. Day Signed-off-by: Jiri Kosina --- arch/x86/xen/smp.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/x86/xen/smp.c b/arch/x86/xen/smp.c index 563d2050498..deafb65ef44 100644 --- a/arch/x86/xen/smp.c +++ b/arch/x86/xen/smp.c @@ -361,7 +361,7 @@ static void xen_cpu_die(unsigned int cpu) alternatives_smp_switch(0); } -static void __cpuinit xen_play_dead(void) /* used only with CPU_HOTPLUG */ +static void __cpuinit xen_play_dead(void) /* used only with HOTPLUG_CPU */ { play_dead_common(); HYPERVISOR_vcpu_op(VCPUOP_down, smp_processor_id(), NULL); -- cgit v1.2.3-70-g09d2 From 947af2943576400628bba085eaa6b85143526133 Mon Sep 17 00:00:00 2001 From: Stefan Weil Date: Thu, 7 Jan 2010 00:03:52 +0100 Subject: Fix spelling of 'platform' in comments and doc Replace platfrom -> platform. This is a frequent spelling bug. Signed-off-by: Stefan Weil Signed-off-by: Jiri Kosina --- Documentation/driver-model/platform.txt | 2 +- arch/arm/mach-davinci/include/mach/i2c.h | 2 +- arch/arm/mach-s3c2410/include/mach/spi-gpio.h | 2 +- arch/arm/plat-s3c/include/plat/nand.h | 2 +- arch/blackfin/include/asm/nand.h | 4 ++-- arch/powerpc/kernel/legacy_serial.c | 2 +- drivers/mtd/maps/plat-ram.c | 2 +- drivers/net/cxgb3/sge.c | 4 ++-- drivers/video/mbx/mbxfb.c | 2 +- include/linux/dm9000.h | 2 +- 10 files changed, 12 insertions(+), 12 deletions(-) (limited to 'arch') diff --git a/Documentation/driver-model/platform.txt b/Documentation/driver-model/platform.txt index 2e2c2ea90ce..41f41632ee5 100644 --- a/Documentation/driver-model/platform.txt +++ b/Documentation/driver-model/platform.txt @@ -192,7 +192,7 @@ command line. This will execute all matching early_param() callbacks. User specified early platform devices will be registered at this point. For the early serial console case the user can specify port on the kernel command line as "earlyprintk=serial.0" where "earlyprintk" is -the class string, "serial" is the name of the platfrom driver and +the class string, "serial" is the name of the platform driver and 0 is the platform device id. If the id is -1 then the dot and the id can be omitted. diff --git a/arch/arm/mach-davinci/include/mach/i2c.h b/arch/arm/mach-davinci/include/mach/i2c.h index c248e9b7e82..44bdea13cc8 100644 --- a/arch/arm/mach-davinci/include/mach/i2c.h +++ b/arch/arm/mach-davinci/include/mach/i2c.h @@ -1,5 +1,5 @@ /* - * DaVinci I2C controller platfrom_device info + * DaVinci I2C controller platform_device info * * Author: Vladimir Barinov, MontaVista Software, Inc. * diff --git a/arch/arm/mach-s3c2410/include/mach/spi-gpio.h b/arch/arm/mach-s3c2410/include/mach/spi-gpio.h index 980a099e209..dcef2287cb3 100644 --- a/arch/arm/mach-s3c2410/include/mach/spi-gpio.h +++ b/arch/arm/mach-s3c2410/include/mach/spi-gpio.h @@ -3,7 +3,7 @@ * Copyright (c) 2006 Simtec Electronics * Ben Dooks * - * S3C2410 - SPI Controller platfrom_device info + * S3C2410 - SPI Controller platform_device info * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as diff --git a/arch/arm/plat-s3c/include/plat/nand.h b/arch/arm/plat-s3c/include/plat/nand.h index 226147b7e02..b64115fa93a 100644 --- a/arch/arm/plat-s3c/include/plat/nand.h +++ b/arch/arm/plat-s3c/include/plat/nand.h @@ -3,7 +3,7 @@ * Copyright (c) 2004 Simtec Electronics * Ben Dooks * - * S3C2410 - NAND device controller platfrom_device info + * S3C2410 - NAND device controller platform_device info * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as diff --git a/arch/blackfin/include/asm/nand.h b/arch/blackfin/include/asm/nand.h index 3ae8b569edf..3a1e79dfc8d 100644 --- a/arch/blackfin/include/asm/nand.h +++ b/arch/blackfin/include/asm/nand.h @@ -1,5 +1,5 @@ /* - * BF5XX - NAND flash controller platfrom_device info + * BF5XX - NAND flash controller platform_device info * * Copyright 2007-2008 Analog Devices, Inc. * @@ -8,7 +8,7 @@ /* struct bf5xx_nand_platform * - * define a interface between platfrom board specific code and + * define a interface between platform board specific code and * bf54x NFC driver. * * nr_partitions = number of partitions pointed to be partitoons (or zero) diff --git a/arch/powerpc/kernel/legacy_serial.c b/arch/powerpc/kernel/legacy_serial.c index 9ddfaef1a18..035ada5443e 100644 --- a/arch/powerpc/kernel/legacy_serial.c +++ b/arch/powerpc/kernel/legacy_serial.c @@ -469,7 +469,7 @@ static int __init serial_dev_init(void) return -ENODEV; /* - * Before we register the platfrom serial devices, we need + * Before we register the platform serial devices, we need * to fixup their interrupts and their IO ports. */ DBG("Fixing serial ports interrupts and IO ports ...\n"); diff --git a/drivers/mtd/maps/plat-ram.c b/drivers/mtd/maps/plat-ram.c index dafb91944e7..76a76be5a7b 100644 --- a/drivers/mtd/maps/plat-ram.c +++ b/drivers/mtd/maps/plat-ram.c @@ -4,7 +4,7 @@ * http://www.simtec.co.uk/products/SWLINUX/ * Ben Dooks * - * Generic platfrom device based RAM map + * Generic platform device based RAM map * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/drivers/net/cxgb3/sge.c b/drivers/net/cxgb3/sge.c index bdbd14727e4..5dbc125822b 100644 --- a/drivers/net/cxgb3/sge.c +++ b/drivers/net/cxgb3/sge.c @@ -196,13 +196,13 @@ static inline void refill_rspq(struct adapter *adapter, /** * need_skb_unmap - does the platform need unmapping of sk_buffs? * - * Returns true if the platfrom needs sk_buff unmapping. The compiler + * Returns true if the platform needs sk_buff unmapping. The compiler * optimizes away unecessary code if this returns true. */ static inline int need_skb_unmap(void) { /* - * This structure is used to tell if the platfrom needs buffer + * This structure is used to tell if the platform needs buffer * unmapping by checking if DECLARE_PCI_UNMAP_ADDR defines anything. */ struct dummy { diff --git a/drivers/video/mbx/mbxfb.c b/drivers/video/mbx/mbxfb.c index 01f77bcc68f..afea9abbd67 100644 --- a/drivers/video/mbx/mbxfb.c +++ b/drivers/video/mbx/mbxfb.c @@ -693,7 +693,7 @@ static void __devinit setup_memc(struct fb_info *fbi) unsigned long tmp; int i; - /* FIXME: use platfrom specific parameters */ + /* FIXME: use platform specific parameters */ /* setup SDRAM controller */ write_reg_dly((LMCFG_LMC_DS | LMCFG_LMC_TS | LMCFG_LMD_TS | LMCFG_LMA_TS), diff --git a/include/linux/dm9000.h b/include/linux/dm9000.h index c30879cf93b..96e87693d93 100644 --- a/include/linux/dm9000.h +++ b/include/linux/dm9000.h @@ -23,7 +23,7 @@ #define DM9000_PLATF_NO_EEPROM (0x0010) #define DM9000_PLATF_SIMPLE_PHY (0x0020) /* Use NSR to find LinkStatus */ -/* platfrom data for platfrom device structure's platfrom_data field */ +/* platform data for platform device structure's platform_data field */ struct dm9000_plat_data { unsigned int flags; -- cgit v1.2.3-70-g09d2 From fb637f3cd31783db2b654842ea32ffec15c4bd62 Mon Sep 17 00:00:00 2001 From: "Justin P. Mattock" Date: Thu, 14 Jan 2010 22:16:16 -0800 Subject: fix comment typo in pci-dma.c Signed-off-by: Justin P. Mattock Signed-off-by: Jiri Kosina --- arch/x86/kernel/pci-dma.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/x86/kernel/pci-dma.c b/arch/x86/kernel/pci-dma.c index 75e14e21f61..eec33a7d96a 100644 --- a/arch/x86/kernel/pci-dma.c +++ b/arch/x86/kernel/pci-dma.c @@ -38,7 +38,7 @@ int iommu_detected __read_mostly = 0; * This variable becomes 1 if iommu=pt is passed on the kernel command line. * If this variable is 1, IOMMU implementations do no DMA translation for * devices and allow every device to access to whole physical memory. This is - * useful if a user want to use an IOMMU only for KVM device assignment to + * useful if a user wants to use an IOMMU only for KVM device assignment to * guests and not for driver dma translation. */ int iommu_pass_through __read_mostly; -- cgit v1.2.3-70-g09d2 From 2273130de8b24adeb59231a9a8c6274bf5d35447 Mon Sep 17 00:00:00 2001 From: Thadeu Lima de Souza Cascardo Date: Sun, 17 Jan 2010 19:23:14 -0200 Subject: fix comment typo leve -> level in powerpc Signed-off-by: Thadeu Lima de Souza Cascardo Signed-off-by: Jiri Kosina --- arch/powerpc/mm/tlb_low_64e.S | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/powerpc/mm/tlb_low_64e.S b/arch/powerpc/mm/tlb_low_64e.S index f288279e679..8b04c54e596 100644 --- a/arch/powerpc/mm/tlb_low_64e.S +++ b/arch/powerpc/mm/tlb_low_64e.S @@ -1,5 +1,5 @@ /* - * Low leve TLB miss handlers for Book3E + * Low level TLB miss handlers for Book3E * * Copyright (C) 2008-2009 * Ben. Herrenschmidt (benh@kernel.crashing.org), IBM Corp. -- cgit v1.2.3-70-g09d2 From 659431fcafd820cc426afedadcc4548933224985 Mon Sep 17 00:00:00 2001 From: Uwe Kleine-König Date: Mon, 18 Jan 2010 16:02:48 +0100 Subject: fix typos "precidence" -> "precedence" in comments MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This patch was generated by git grep -E -i -l 'precidence' | xargs -r perl -p -i -e 's/precidence/precedence/' Signed-off-by: Uwe Kleine-König Signed-off-by: Jiri Kosina --- arch/arm/boot/bootp/init.S | 2 +- arch/arm/common/clkdev.c | 2 +- arch/sh/kernel/cpu/clock.c | 2 +- tools/perf/perf.c | 2 +- 4 files changed, 4 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/bootp/init.S b/arch/arm/boot/bootp/init.S index df7bc7068d0..8b0de41c3dc 100644 --- a/arch/arm/boot/bootp/init.S +++ b/arch/arm/boot/bootp/init.S @@ -49,7 +49,7 @@ _start: add lr, pc, #-0x8 @ lr = current load addr /* * find the end of the tag list, and then add an INITRD tag on the end. * If there is already an INITRD tag, then we ignore it; the last INITRD - * tag takes precidence. + * tag takes precedence. */ taglist: ldr r10, [r9, #0] @ tag length teq r10, #0 @ last tag (zero length)? diff --git a/arch/arm/common/clkdev.c b/arch/arm/common/clkdev.c index aae5bc01acc..6f29b5ccea4 100644 --- a/arch/arm/common/clkdev.c +++ b/arch/arm/common/clkdev.c @@ -32,7 +32,7 @@ static DEFINE_MUTEX(clocks_mutex); * If an entry has a device ID, it must match * If an entry has a connection ID, it must match * Then we take the most specific entry - with the following - * order of precidence: dev+con > dev only > con only. + * order of precedence: dev+con > dev only > con only. */ static struct clk *clk_find(const char *dev_id, const char *con_id) { diff --git a/arch/sh/kernel/cpu/clock.c b/arch/sh/kernel/cpu/clock.c index 83da5debeed..e9fa1bfed53 100644 --- a/arch/sh/kernel/cpu/clock.c +++ b/arch/sh/kernel/cpu/clock.c @@ -404,7 +404,7 @@ EXPORT_SYMBOL_GPL(clk_round_rate); * If an entry has a device ID, it must match * If an entry has a connection ID, it must match * Then we take the most specific entry - with the following - * order of precidence: dev+con > dev only > con only. + * order of precedence: dev+con > dev only > con only. */ static struct clk *clk_find(const char *dev_id, const char *con_id) { diff --git a/tools/perf/perf.c b/tools/perf/perf.c index 873e55fab37..89eae67a358 100644 --- a/tools/perf/perf.c +++ b/tools/perf/perf.c @@ -442,7 +442,7 @@ int main(int argc, const char **argv) /* * We use PATH to find perf commands, but we prepend some higher - * precidence paths: the "--exec-path" option, the PERF_EXEC_PATH + * precedence paths: the "--exec-path" option, the PERF_EXEC_PATH * environment, and the $(perfexecdir) from the Makefile at build * time. */ -- cgit v1.2.3-70-g09d2 From 9ddc5b6f18fbac07d2746566b73b89e89fdd4e6a Mon Sep 17 00:00:00 2001 From: Uwe Kleine-König Date: Wed, 20 Jan 2010 17:02:24 +0100 Subject: tree-wide: fix typos "ammount" -> "amount" MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Uwe Kleine-König Signed-off-by: Jiri Kosina --- arch/powerpc/mm/init_32.c | 2 +- drivers/char/serial167.c | 2 +- drivers/isdn/sc/hardware.h | 2 +- drivers/message/i2o/iop.c | 2 +- drivers/net/ks8851.c | 2 +- drivers/platform/x86/thinkpad_acpi.c | 4 ++-- drivers/scsi/libfc/fc_fcp.c | 2 +- drivers/serial/samsung.c | 2 +- drivers/usb/serial/opticon.c | 2 +- drivers/usb/serial/symbolserial.c | 2 +- 10 files changed, 11 insertions(+), 11 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/mm/init_32.c b/arch/powerpc/mm/init_32.c index 4ec900af332..b1dbd9ee87c 100644 --- a/arch/powerpc/mm/init_32.c +++ b/arch/powerpc/mm/init_32.c @@ -47,7 +47,7 @@ #include "mmu_decl.h" #if defined(CONFIG_KERNEL_START_BOOL) || defined(CONFIG_LOWMEM_SIZE_BOOL) -/* The ammount of lowmem must be within 0xF0000000 - KERNELBASE. */ +/* The amount of lowmem must be within 0xF0000000 - KERNELBASE. */ #if (CONFIG_LOWMEM_SIZE > (0xF0000000 - PAGE_OFFSET)) #error "You must adjust CONFIG_LOWMEM_SIZE or CONFIG_START_KERNEL" #endif diff --git a/drivers/char/serial167.c b/drivers/char/serial167.c index 452370af95d..aee3c0d1759 100644 --- a/drivers/char/serial167.c +++ b/drivers/char/serial167.c @@ -1990,7 +1990,7 @@ void mvme167_serial_console_setup(int cflag) /* * Attempt to set up all channels to something reasonable, and * bang out a INIT_CHAN command. We should then be able to limit - * the ammount of fiddling we have to do in normal running. + * the amount of fiddling we have to do in normal running. */ for (ch = 3; ch >= 0; ch--) { diff --git a/drivers/isdn/sc/hardware.h b/drivers/isdn/sc/hardware.h index 9e6d5302bf8..627324856ea 100644 --- a/drivers/isdn/sc/hardware.h +++ b/drivers/isdn/sc/hardware.h @@ -87,7 +87,7 @@ #define BRI_CHANNELS 2 /* Number of B channels */ #define BRI_BASEPG_VAL 0x98 #define BRI_MAGIC 0x60000 /* Magic Number */ -#define BRI_MEMSIZE 0x10000 /* Ammount of RAM (64K) */ +#define BRI_MEMSIZE 0x10000 /* Amount of RAM (64K) */ #define BRI_PARTNO "72-029" #define BRI_FEATURES ISDN_FEATURE_L2_HDLC | ISDN_FEATURE_L3_TRANS; /* diff --git a/drivers/message/i2o/iop.c b/drivers/message/i2o/iop.c index e5ab6214150..ef5ce2676f0 100644 --- a/drivers/message/i2o/iop.c +++ b/drivers/message/i2o/iop.c @@ -539,7 +539,7 @@ static int i2o_iop_reset(struct i2o_controller *c) * which is indeterminate. We need to wait until the IOP has * rebooted before we can let the system talk to it. We read * the inbound Free_List until a message is available. If we - * can't read one in the given ammount of time, we assume the + * can't read one in the given amount of time, we assume the * IOP could not reboot properly. */ osm_debug("%s: Reset in progress, waiting for reboot...\n", diff --git a/drivers/net/ks8851.c b/drivers/net/ks8851.c index 6d3ac65bc35..cfebe0e218f 100644 --- a/drivers/net/ks8851.c +++ b/drivers/net/ks8851.c @@ -407,7 +407,7 @@ static irqreturn_t ks8851_irq(int irq, void *pw) * @buff: The buffer address * @len: The length of the data to read * - * Issue an RXQ FIFO read command and read the @len ammount of data from + * Issue an RXQ FIFO read command and read the @len amount of data from * the FIFO into the buffer specified by @buff. */ static void ks8851_rdfifo(struct ks8851_net *ks, u8 *buff, unsigned len) diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c index e67e4feb35c..215621c31c5 100644 --- a/drivers/platform/x86/thinkpad_acpi.c +++ b/drivers/platform/x86/thinkpad_acpi.c @@ -1667,7 +1667,7 @@ static void tpacpi_remove_driver_attributes(struct device_driver *drv) * Table of recommended minimum BIOS versions * * Reasons for listing: - * 1. Stable BIOS, listed because the unknown ammount of + * 1. Stable BIOS, listed because the unknown amount of * bugs and bad ACPI behaviour on older versions * * 2. BIOS or EC fw with known bugs that trigger on Linux @@ -7070,7 +7070,7 @@ static struct ibm_struct volume_driver_data = { * * Fan speed changes of any sort (including those caused by the * disengaged mode) are usually done slowly by the firmware as the - * maximum ammount of fan duty cycle change per second seems to be + * maximum amount of fan duty cycle change per second seems to be * limited. * * Reading is not available if GFAN exists. diff --git a/drivers/scsi/libfc/fc_fcp.c b/drivers/scsi/libfc/fc_fcp.c index 881d5dfe8c7..96ee599d9a0 100644 --- a/drivers/scsi/libfc/fc_fcp.c +++ b/drivers/scsi/libfc/fc_fcp.c @@ -522,7 +522,7 @@ crc_err: * * Called after receiving a Transfer Ready data descriptor. * If the LLD is capable of sequence offload then send down the - * seq_blen ammount of data in single frame, otherwise send + * seq_blen amount of data in single frame, otherwise send * multiple frames of the maximum frame payload supported by * the target port. */ diff --git a/drivers/serial/samsung.c b/drivers/serial/samsung.c index 52e3df113ec..03c010af966 100644 --- a/drivers/serial/samsung.c +++ b/drivers/serial/samsung.c @@ -1271,7 +1271,7 @@ s3c24xx_serial_console_txrdy(struct uart_port *port, unsigned int ufcon) unsigned long ufstat, utrstat; if (ufcon & S3C2410_UFCON_FIFOMODE) { - /* fifo mode - check ammount of data in fifo registers... */ + /* fifo mode - check amount of data in fifo registers... */ ufstat = rd_regl(port, S3C2410_UFSTAT); return (ufstat & info->tx_fifofull) ? 0 : 1; diff --git a/drivers/usb/serial/opticon.c b/drivers/usb/serial/opticon.c index 4cdb975caa8..96937f1b8b9 100644 --- a/drivers/usb/serial/opticon.c +++ b/drivers/usb/serial/opticon.c @@ -120,7 +120,7 @@ static void opticon_bulk_callback(struct urb *urb) } } else { dev_dbg(&priv->udev->dev, - "Improper ammount of data received from the device, " + "Improper amount of data received from the device, " "%d bytes", urb->actual_length); } diff --git a/drivers/usb/serial/symbolserial.c b/drivers/usb/serial/symbolserial.c index b282c0f2d8e..aebfcf69964 100644 --- a/drivers/usb/serial/symbolserial.c +++ b/drivers/usb/serial/symbolserial.c @@ -100,7 +100,7 @@ static void symbol_int_callback(struct urb *urb) } } else { dev_dbg(&priv->udev->dev, - "Improper ammount of data received from the device, " + "Improper amount of data received from the device, " "%d bytes", urb->actual_length); } -- cgit v1.2.3-70-g09d2 From 551e378ca1852dc51609b722014416d4da0770c6 Mon Sep 17 00:00:00 2001 From: Daniel Mack Date: Thu, 28 Jan 2010 16:11:51 +0800 Subject: tree-wide: s/widht/width/g typo in comments Signed-off-by: Daniel Mack Cc: Jiri Kosina Signed-off-by: Jiri Kosina --- arch/m68k/include/asm/fbio.h | 2 +- arch/sparc/include/asm/fbio.h | 2 +- drivers/net/skfp/ess.c | 2 +- drivers/video/68328fb.c | 2 +- drivers/video/pm2fb.c | 2 +- 5 files changed, 5 insertions(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/m68k/include/asm/fbio.h b/arch/m68k/include/asm/fbio.h index b9215a0907d..0a21da87f7d 100644 --- a/arch/m68k/include/asm/fbio.h +++ b/arch/m68k/include/asm/fbio.h @@ -173,7 +173,7 @@ struct mdi_cfginfo { int mdi_ncluts; /* Number of implemented CLUTs in this MDI */ int mdi_type; /* FBTYPE name */ int mdi_height; /* height */ - int mdi_width; /* widht */ + int mdi_width; /* width */ int mdi_size; /* available ram */ int mdi_mode; /* 8bpp, 16bpp or 32bpp */ int mdi_pixfreq; /* pixel clock (from PROM) */ diff --git a/arch/sparc/include/asm/fbio.h b/arch/sparc/include/asm/fbio.h index b9215a0907d..0a21da87f7d 100644 --- a/arch/sparc/include/asm/fbio.h +++ b/arch/sparc/include/asm/fbio.h @@ -173,7 +173,7 @@ struct mdi_cfginfo { int mdi_ncluts; /* Number of implemented CLUTs in this MDI */ int mdi_type; /* FBTYPE name */ int mdi_height; /* height */ - int mdi_width; /* widht */ + int mdi_width; /* width */ int mdi_size; /* available ram */ int mdi_mode; /* 8bpp, 16bpp or 32bpp */ int mdi_pixfreq; /* pixel clock (from PROM) */ diff --git a/drivers/net/skfp/ess.c b/drivers/net/skfp/ess.c index a85efcfd9d0..e8387d25f24 100644 --- a/drivers/net/skfp/ess.c +++ b/drivers/net/skfp/ess.c @@ -557,7 +557,7 @@ static void ess_send_alc_req(struct s_smc *smc) /* * send never allocation request where the requested payload and - * overhead is zero or deallocate bandwidht when no bandwidth is + * overhead is zero or deallocate bandwidth when no bandwidth is * parsed */ if (!smc->mib.fddiESSPayload) { diff --git a/drivers/video/68328fb.c b/drivers/video/68328fb.c index 0b17824b0eb..2110556f76b 100644 --- a/drivers/video/68328fb.c +++ b/drivers/video/68328fb.c @@ -308,7 +308,7 @@ static int mc68x328fb_setcolreg(u_int regno, u_int red, u_int green, u_int blue, * Pseudocolor: * uses offset = 0 && length = RAMDAC register width. * var->{color}.offset is 0 - * var->{color}.length contains widht of DAC + * var->{color}.length contains width of DAC * cmap is not used * RAMDAC[X] is programmed to (red, green, blue) * Truecolor: diff --git a/drivers/video/pm2fb.c b/drivers/video/pm2fb.c index 36436ee6c1a..27f93aab6dd 100644 --- a/drivers/video/pm2fb.c +++ b/drivers/video/pm2fb.c @@ -896,7 +896,7 @@ static int pm2fb_setcolreg(unsigned regno, unsigned red, unsigned green, * Pseudocolor: * uses offset = 0 && length = DAC register width. * var->{color}.offset is 0 - * var->{color}.length contains widht of DAC + * var->{color}.length contains width of DAC * cmap is not used * DAC[X] is programmed to (red, green, blue) * Truecolor: -- cgit v1.2.3-70-g09d2 From 1537a3638cbf741d3826c1002026cce487a6bee0 Mon Sep 17 00:00:00 2001 From: Daniel Mack Date: Fri, 29 Jan 2010 15:57:49 +0800 Subject: tree-wide: fix 'lenght' typo in comments and code Some misspelled occurences of 'octet' and some comments were also fixed as I was on it. Signed-off-by: Daniel Mack Cc: Jiri Kosina Cc: Joe Perches Cc: Junio C Hamano Signed-off-by: Jiri Kosina --- arch/arm/mach-at91/include/mach/at91_mci.h | 2 +- arch/s390/crypto/sha_common.c | 2 +- drivers/crypto/hifn_795x.c | 2 +- drivers/isdn/mISDN/l1oip_core.c | 2 +- drivers/usb/wusbcore/wusbhc.h | 2 +- drivers/uwb/uwbd.c | 2 +- fs/cifs/asn1.c | 2 +- fs/ext4/mballoc.c | 2 +- fs/udf/inode.c | 2 +- kernel/trace/trace.h | 2 +- 10 files changed, 10 insertions(+), 10 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-at91/include/mach/at91_mci.h b/arch/arm/mach-at91/include/mach/at91_mci.h index 550d503a1bc..57f8ee15494 100644 --- a/arch/arm/mach-at91/include/mach/at91_mci.h +++ b/arch/arm/mach-at91/include/mach/at91_mci.h @@ -77,7 +77,7 @@ #define AT91_MCI_BLKR 0x18 /* Block Register */ #define AT91_MCI_BLKR_BCNT(n) ((0xffff & (n)) << 0) /* Block count */ -#define AT91_MCI_BLKR_BLKLEN(n) ((0xffff & (n)) << 16) /* Block lenght */ +#define AT91_MCI_BLKR_BLKLEN(n) ((0xffff & (n)) << 16) /* Block length */ #define AT91_MCI_RSPR(n) (0x20 + ((n) * 4)) /* Response Registers 0-3 */ #define AT91_MCR_RDR 0x30 /* Receive Data Register */ diff --git a/arch/s390/crypto/sha_common.c b/arch/s390/crypto/sha_common.c index 7903ec47e6b..f42dbabc0d3 100644 --- a/arch/s390/crypto/sha_common.c +++ b/arch/s390/crypto/sha_common.c @@ -79,7 +79,7 @@ int s390_sha_final(struct shash_desc *desc, u8 *out) memset(ctx->buf + index, 0x00, end - index - 8); /* - * Append message length. Well, SHA-512 wants a 128 bit lenght value, + * Append message length. Well, SHA-512 wants a 128 bit length value, * nevertheless we use u64, should be enough for now... */ bits = ctx->count * 8; diff --git a/drivers/crypto/hifn_795x.c b/drivers/crypto/hifn_795x.c index 09ad9154d86..73e8b1713b5 100644 --- a/drivers/crypto/hifn_795x.c +++ b/drivers/crypto/hifn_795x.c @@ -321,7 +321,7 @@ static atomic_t hifn_dev_number; #define HIFN_PUBOPLEN_MOD_M 0x0000007f /* modulus length mask */ #define HIFN_PUBOPLEN_MOD_S 0 /* modulus length shift */ #define HIFN_PUBOPLEN_EXP_M 0x0003ff80 /* exponent length mask */ -#define HIFN_PUBOPLEN_EXP_S 7 /* exponent lenght shift */ +#define HIFN_PUBOPLEN_EXP_S 7 /* exponent length shift */ #define HIFN_PUBOPLEN_RED_M 0x003c0000 /* reducend length mask */ #define HIFN_PUBOPLEN_RED_S 18 /* reducend length shift */ diff --git a/drivers/isdn/mISDN/l1oip_core.c b/drivers/isdn/mISDN/l1oip_core.c index 0843fcf8b38..325b1ad7d4b 100644 --- a/drivers/isdn/mISDN/l1oip_core.c +++ b/drivers/isdn/mISDN/l1oip_core.c @@ -477,7 +477,7 @@ l1oip_socket_parse(struct l1oip *hc, struct sockaddr_in *sin, u8 *buf, int len) printk(KERN_DEBUG "%s: received frame, parsing... (%d)\n", __func__, len); - /* check lenght */ + /* check length */ if (len < 1+1+2) { printk(KERN_WARNING "%s: packet error - length %d below " "4 bytes\n", __func__, len); diff --git a/drivers/usb/wusbcore/wusbhc.h b/drivers/usb/wusbcore/wusbhc.h index fd2fd4e277e..759cda55f7c 100644 --- a/drivers/usb/wusbcore/wusbhc.h +++ b/drivers/usb/wusbcore/wusbhc.h @@ -198,7 +198,7 @@ struct wusb_port { * ports) this HC will take. Read-only. * * @port Array of port status for each fake root port. Guaranteed to - * always be the same lenght during device existence + * always be the same length during device existence * [this allows for some unlocked but referenced reading]. * * @mmcies_max Max number of Information Elements this HC can send diff --git a/drivers/uwb/uwbd.c b/drivers/uwb/uwbd.c index 5a777d8624d..6210fe1fd1b 100644 --- a/drivers/uwb/uwbd.c +++ b/drivers/uwb/uwbd.c @@ -43,7 +43,7 @@ * * EVENTS * - * Events have a type, a subtype, a lenght, some other stuff and the + * Events have a type, a subtype, a length, some other stuff and the * data blob, which depends on the event. The header is 'struct * uwb_event'; for payloads, see 'struct uwbd_evt_*'. * diff --git a/fs/cifs/asn1.c b/fs/cifs/asn1.c index 20692fbfdb2..a20bea59893 100644 --- a/fs/cifs/asn1.c +++ b/fs/cifs/asn1.c @@ -136,7 +136,7 @@ asn1_enum_decode(struct asn1_ctx *ctx, __le32 *val) return 0; } - ch = *(ctx->pointer)++; /* ch has 0xa, ptr points to lenght octet */ + ch = *(ctx->pointer)++; /* ch has 0xa, ptr points to length octet */ if ((ch) == ASN1_ENUM) /* if ch value is ENUM, 0xa */ *val = *(++(ctx->pointer)); /* value has enum value */ else diff --git a/fs/ext4/mballoc.c b/fs/ext4/mballoc.c index d34afad3e13..b794dd8141a 100644 --- a/fs/ext4/mballoc.c +++ b/fs/ext4/mballoc.c @@ -69,7 +69,7 @@ * * pa_lstart -> the logical start block for this prealloc space * pa_pstart -> the physical start block for this prealloc space - * pa_len -> lenght for this prealloc space + * pa_len -> length for this prealloc space * pa_free -> free space available in this prealloc space * * The inode preallocation space is used looking at the _logical_ start diff --git a/fs/udf/inode.c b/fs/udf/inode.c index f90231eb291..772a4fa557f 100644 --- a/fs/udf/inode.c +++ b/fs/udf/inode.c @@ -102,7 +102,7 @@ void udf_clear_inode(struct inode *inode) if (iinfo->i_alloc_type != ICBTAG_FLAG_AD_IN_ICB && inode->i_size != iinfo->i_lenExtents) { printk(KERN_WARNING "UDF-fs (%s): Inode %lu (mode %o) has " - "inode size %llu different from extent lenght %llu. " + "inode size %llu different from extent length %llu. " "Filesystem need not be standards compliant.\n", inode->i_sb->s_id, inode->i_ino, inode->i_mode, (unsigned long long)inode->i_size, diff --git a/kernel/trace/trace.h b/kernel/trace/trace.h index 4df6a77eb19..e4b32c8aa85 100644 --- a/kernel/trace/trace.h +++ b/kernel/trace/trace.h @@ -549,7 +549,7 @@ static inline int ftrace_trace_task(struct task_struct *task) * struct trace_parser - servers for reading the user input separated by spaces * @cont: set if the input is not complete - no final space char was found * @buffer: holds the parsed user input - * @idx: user input lenght + * @idx: user input length * @size: buffer size */ struct trace_parser { -- cgit v1.2.3-70-g09d2 From 3ad2f3fbb961429d2aa627465ae4829758bc7e07 Mon Sep 17 00:00:00 2001 From: Daniel Mack Date: Wed, 3 Feb 2010 08:01:28 +0800 Subject: tree-wide: Assorted spelling fixes In particular, several occurances of funny versions of 'success', 'unknown', 'therefore', 'acknowledge', 'argument', 'achieve', 'address', 'beginning', 'desirable', 'separate' and 'necessary' are fixed. Signed-off-by: Daniel Mack Cc: Joe Perches Cc: Junio C Hamano Signed-off-by: Jiri Kosina --- Documentation/DocBook/mtdnand.tmpl | 6 +++--- Documentation/DocBook/v4l/common.xml | 2 +- Documentation/DocBook/v4l/vidioc-g-parm.xml | 2 +- Documentation/arm/Samsung-S3C24XX/CPUfreq.txt | 4 ++-- Documentation/hwmon/abituguru | 2 +- Documentation/input/rotary-encoder.txt | 2 +- Documentation/networking/skfp.txt | 2 +- Documentation/s390/kvm.txt | 2 +- Documentation/scsi/ChangeLog.lpfc | 10 +++++----- Documentation/trace/ftrace.txt | 2 +- arch/arm/mach-ep93xx/micro9.c | 2 +- arch/arm/mach-nomadik/board-nhk8815.c | 2 +- arch/arm/mach-u300/core.c | 4 ++-- arch/arm/mach-u300/include/mach/debug-macro.S | 2 +- arch/arm/plat-s3c/include/plat/gpio-cfg-helpers.h | 2 +- arch/arm/plat-s3c/include/plat/regs-usb-hsotg-phy.h | 2 +- arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h | 2 +- arch/cris/arch-v10/lib/old_checksum.c | 2 +- arch/cris/arch-v32/mm/tlb.c | 2 +- arch/h8300/include/asm/io.h | 2 +- arch/ia64/sn/kernel/setup.c | 2 +- arch/m68k/atari/atakeyb.c | 2 +- arch/m68k/include/asm/io_no.h | 2 +- arch/powerpc/boot/dts/kmeter1.dts | 2 +- arch/s390/include/asm/cio.h | 2 +- arch/s390/kernel/sclp.S | 2 +- arch/sparc/kernel/leon_kernel.c | 2 +- arch/sparc/kernel/perf_event.c | 2 +- arch/x86/crypto/twofish-i586-asm_32.S | 10 +++++----- arch/x86/crypto/twofish-x86_64-asm_64.S | 20 ++++++++++---------- arch/x86/kernel/head_64.S | 2 +- arch/x86/kernel/pci-calgary_64.c | 2 +- arch/x86/kernel/tsc.c | 2 +- arch/xtensa/kernel/entry.S | 4 ++-- block/bsg.c | 2 +- drivers/acpi/dock.c | 2 +- drivers/ata/libata-sff.c | 2 +- drivers/ata/pata_acpi.c | 2 +- drivers/ata/pata_hpt3x3.c | 2 +- drivers/ata/pata_pcmcia.c | 2 +- drivers/block/drbd/drbd_int.h | 4 ++-- drivers/block/drbd/drbd_req.h | 2 +- drivers/char/agp/intel-agp.c | 2 +- drivers/char/applicom.c | 2 +- drivers/char/hvc_iseries.c | 2 +- drivers/char/hw_random/n2-drv.c | 2 +- drivers/char/ip2/i2hw.h | 2 +- drivers/char/pty.c | 2 +- drivers/char/tty_io.c | 2 +- drivers/char/vt.c | 2 +- drivers/dma/coh901318_lli.h | 2 +- drivers/gpu/drm/nouveau/nouveau_bios.c | 2 +- drivers/gpu/drm/nouveau/nouveau_drv.h | 2 +- drivers/gpu/drm/via/via_irq.c | 4 ++-- drivers/i2c/busses/i2c-pxa.c | 2 +- drivers/infiniband/hw/ehca/ehca_qes.h | 4 ++-- drivers/infiniband/hw/ehca/ehca_reqs.c | 2 +- drivers/input/misc/yealink.h | 2 +- drivers/isdn/i4l/isdn_common.c | 2 +- drivers/media/dvb/dvb-core/dvb_frontend.h | 8 ++++---- drivers/media/video/bt8xx/bttv-cards.c | 4 ++-- drivers/media/video/gspca/ov519.c | 2 +- drivers/media/video/pwc/philips.txt | 2 +- drivers/media/video/sn9c102/sn9c102_sensor.h | 2 +- drivers/media/video/tea6420.c | 2 +- drivers/mfd/sm501.c | 8 ++++---- drivers/mmc/host/mxcmmc.c | 2 +- drivers/mtd/chips/jedec_probe.c | 2 +- drivers/mtd/nand/bcm_umi_nand.c | 4 ++-- drivers/mtd/nand/mxc_nand.c | 2 +- drivers/net/atlx/atl2.h | 2 +- drivers/net/chelsio/sge.c | 2 +- drivers/net/e1000e/82571.c | 2 +- drivers/net/e1000e/lib.c | 2 +- drivers/net/igb/igb_main.c | 2 +- drivers/net/irda/sa1100_ir.c | 2 +- drivers/net/qlge/qlge_ethtool.c | 2 +- drivers/net/qlge/qlge_main.c | 2 +- drivers/net/sfc/regs.h | 2 +- drivers/net/smsc9420.c | 2 +- drivers/net/spider_net.c | 4 ++-- drivers/net/sungem.c | 2 +- drivers/net/tehuti.c | 2 +- drivers/net/tokenring/tms380tr.c | 4 ++-- drivers/net/tun.c | 2 +- drivers/net/ucc_geth.c | 2 +- drivers/net/wimax/i2400m/fw.c | 2 +- drivers/net/wimax/i2400m/i2400m.h | 2 +- drivers/net/wimax/i2400m/sdio.c | 4 ++-- drivers/net/wimax/i2400m/usb.c | 4 ++-- drivers/net/wireless/ath/ar9170/main.c | 2 +- drivers/net/wireless/iwmc3200wifi/lmac.h | 2 +- drivers/net/wireless/rt2x00/rt2500usb.c | 4 ++-- drivers/net/wireless/rt2x00/rt2800usb.c | 4 ++-- drivers/net/wireless/rt2x00/rt2x00debug.c | 2 +- drivers/net/wireless/rt2x00/rt2x00dev.c | 2 +- drivers/net/wireless/rt2x00/rt2x00queue.c | 2 +- drivers/net/wireless/rt2x00/rt61pci.c | 2 +- drivers/net/wireless/rt2x00/rt73usb.c | 6 +++--- drivers/s390/char/raw3270.c | 2 +- drivers/s390/char/sclp.c | 2 +- drivers/scsi/a100u2w.c | 2 +- drivers/scsi/initio.c | 2 +- drivers/scsi/libfc/fc_fcp.c | 2 +- drivers/scsi/lpfc/lpfc_els.c | 4 ++-- drivers/scsi/pcmcia/nsp_cs.h | 2 +- drivers/scsi/pm8001/pm8001_hwi.c | 2 +- drivers/scsi/pm8001/pm8001_sas.c | 2 +- drivers/scsi/pmcraid.h | 2 +- drivers/scsi/sd.c | 2 +- drivers/spi/spi_s3c24xx.c | 2 +- drivers/usb/musb/musb_regs.h | 2 +- drivers/usb/serial/cypress_m8.c | 2 +- drivers/video/omap/lcdc.c | 2 +- drivers/video/s1d13xxxfb.c | 4 ++-- drivers/video/sm501fb.c | 2 +- fs/affs/bitmap.c | 2 +- fs/binfmt_elf_fdpic.c | 2 +- fs/cifs/cifs_dfs_ref.c | 2 +- fs/cifs/cifssmb.c | 2 +- fs/ext4/move_extent.c | 2 +- fs/fuse/inode.c | 2 +- fs/gfs2/ops_fstype.c | 2 +- fs/jbd/transaction.c | 2 +- fs/nfsd/nfs4xdr.c | 2 +- fs/ocfs2/dlmglue.c | 2 +- fs/ocfs2/extent_map.c | 2 +- fs/reiserfs/bitmap.c | 2 +- include/linux/hil.h | 16 ++++++++-------- include/linux/lru_cache.h | 2 +- include/linux/sched.h | 2 +- include/media/davinci/vpfe_capture.h | 2 +- net/ipv4/tcp_timer.c | 2 +- net/mac80211/mesh_plink.c | 2 +- net/netfilter/nf_conntrack_sip.c | 4 ++-- net/netfilter/xt_hashlimit.c | 2 +- net/sctp/sm_sideeffect.c | 2 +- scripts/gfp-translate | 2 +- sound/pci/rme9652/hdspm.c | 2 +- sound/soc/codecs/wm8990.c | 2 +- tools/perf/util/hist.c | 2 +- 141 files changed, 192 insertions(+), 192 deletions(-) (limited to 'arch') diff --git a/Documentation/DocBook/mtdnand.tmpl b/Documentation/DocBook/mtdnand.tmpl index 5e7d84b4850..133cd6c3f3c 100644 --- a/Documentation/DocBook/mtdnand.tmpl +++ b/Documentation/DocBook/mtdnand.tmpl @@ -488,7 +488,7 @@ static void board_select_chip (struct mtd_info *mtd, int chip) The ECC bytes must be placed immidiately after the data bytes in order to make the syndrome generator work. This is contrary to the usual layout used by software ECC. The - seperation of data and out of band area is not longer + separation of data and out of band area is not longer possible. The nand driver code handles this layout and the remaining free bytes in the oob area are managed by the autoplacement code. Provide a matching oob-layout @@ -560,7 +560,7 @@ static void board_select_chip (struct mtd_info *mtd, int chip) bad blocks. They have factory marked good blocks. The marker pattern is erased when the block is erased to be reused. So in case of powerloss before writing the pattern back to the chip this block - would be lost and added to the bad blocks. Therefor we scan the + would be lost and added to the bad blocks. Therefore we scan the chip(s) when we detect them the first time for good blocks and store this information in a bad block table before erasing any of the blocks. @@ -1094,7 +1094,7 @@ in this page manufacturers specifications. This applies similar to the spare area. - Therefor NAND aware filesystems must either write in page size chunks + Therefore NAND aware filesystems must either write in page size chunks or hold a writebuffer to collect smaller writes until they sum up to pagesize. Available NAND aware filesystems: JFFS2, YAFFS. diff --git a/Documentation/DocBook/v4l/common.xml b/Documentation/DocBook/v4l/common.xml index c65f0ac9b6e..cea23e1c4fc 100644 --- a/Documentation/DocBook/v4l/common.xml +++ b/Documentation/DocBook/v4l/common.xml @@ -1170,7 +1170,7 @@ frames per second. If less than this number of frames is to be captured or output, applications can request frame skipping or duplicating on the driver side. This is especially useful when using the &func-read; or &func-write;, which are not augmented by timestamps -or sequence counters, and to avoid unneccessary data copying. +or sequence counters, and to avoid unnecessary data copying. Finally these ioctls can be used to determine the number of buffers used internally by a driver in read/write mode. For diff --git a/Documentation/DocBook/v4l/vidioc-g-parm.xml b/Documentation/DocBook/v4l/vidioc-g-parm.xml index 78332d365ce..392aa9e5571 100644 --- a/Documentation/DocBook/v4l/vidioc-g-parm.xml +++ b/Documentation/DocBook/v4l/vidioc-g-parm.xml @@ -55,7 +55,7 @@ captured or output, applications can request frame skipping or duplicating on the driver side. This is especially useful when using the read() or write(), which are not augmented by timestamps or sequence counters, and to avoid -unneccessary data copying. +unnecessary data copying. Further these ioctls can be used to determine the number of buffers used internally by a driver in read/write mode. For diff --git a/Documentation/arm/Samsung-S3C24XX/CPUfreq.txt b/Documentation/arm/Samsung-S3C24XX/CPUfreq.txt index 76b3a11e90b..fa968aa99d6 100644 --- a/Documentation/arm/Samsung-S3C24XX/CPUfreq.txt +++ b/Documentation/arm/Samsung-S3C24XX/CPUfreq.txt @@ -14,8 +14,8 @@ Introduction how the clocks are arranged. The first implementation used as single PLL to feed the ARM, memory and peripherals via a series of dividers and muxes and this is the implementation that is documented here. A - newer version where there is a seperate PLL and clock divider for the - ARM core is available as a seperate driver. + newer version where there is a separate PLL and clock divider for the + ARM core is available as a separate driver. Layout diff --git a/Documentation/hwmon/abituguru b/Documentation/hwmon/abituguru index 87ffa0f5ec7..5eb3b9d5f0d 100644 --- a/Documentation/hwmon/abituguru +++ b/Documentation/hwmon/abituguru @@ -30,7 +30,7 @@ Supported chips: bank1_types=1,1,0,0,0,0,0,2,0,0,0,0,2,0,0,1 You may also need to specify the fan_sensors option for these boards fan_sensors=5 - 2) There is a seperate abituguru3 driver for these motherboards, + 2) There is a separate abituguru3 driver for these motherboards, the abituguru (without the 3 !) driver will not work on these motherboards (and visa versa)! diff --git a/Documentation/input/rotary-encoder.txt b/Documentation/input/rotary-encoder.txt index 3a6aec40c0b..8b4129de1d2 100644 --- a/Documentation/input/rotary-encoder.txt +++ b/Documentation/input/rotary-encoder.txt @@ -75,7 +75,7 @@ and the number of steps or will clamp at the maximum and zero depending on the configuration. Because GPIO to IRQ mapping is platform specific, this information must -be given in seperately to the driver. See the example below. +be given in separately to the driver. See the example below. ------------------ diff --git a/Documentation/networking/skfp.txt b/Documentation/networking/skfp.txt index abfddf81e34..203ec66c9fb 100644 --- a/Documentation/networking/skfp.txt +++ b/Documentation/networking/skfp.txt @@ -68,7 +68,7 @@ Compaq adapters (not tested): ======================= From v2.01 on, the driver is integrated in the linux kernel sources. -Therefor, the installation is the same as for any other adapter +Therefore, the installation is the same as for any other adapter supported by the kernel. Refer to the manual of your distribution about the installation of network adapters. diff --git a/Documentation/s390/kvm.txt b/Documentation/s390/kvm.txt index 6f5ceb0f09f..85f3280d7ef 100644 --- a/Documentation/s390/kvm.txt +++ b/Documentation/s390/kvm.txt @@ -102,7 +102,7 @@ args: unsigned long see also: include/linux/kvm.h This ioctl stores the state of the cpu at the guest real address given as argument, unless one of the following values defined in include/linux/kvm.h -is given as arguement: +is given as argument: KVM_S390_STORE_STATUS_NOADDR - the CPU stores its status to the save area in absolute lowcore as defined by the principles of operation KVM_S390_STORE_STATUS_PREFIXED - the CPU stores its status to the save area in diff --git a/Documentation/scsi/ChangeLog.lpfc b/Documentation/scsi/ChangeLog.lpfc index ff19a52fe00..2ffc1148eb9 100644 --- a/Documentation/scsi/ChangeLog.lpfc +++ b/Documentation/scsi/ChangeLog.lpfc @@ -989,8 +989,8 @@ Changes from 20040709 to 20040716 * Remove redundant port_cmp != 2 check in if (!port_cmp) { .... if (port_cmp != 2).... } * Clock changes: removed struct clk_data and timerList. - * Clock changes: seperate nodev_tmo and els_retry_delay into 2 - seperate timers and convert to 1 argument changed + * Clock changes: separate nodev_tmo and els_retry_delay into 2 + separate timers and convert to 1 argument changed LPFC_NODE_FARP_PEND_t to struct lpfc_node_farp_pend convert ipfarp_tmo to 1 argument convert target struct tmofunc and rtplunfunc to 1 argument * cr_count, cr_delay and @@ -1514,7 +1514,7 @@ Changes from 20040402 to 20040409 * Remove unused elxclock declaration in elx_sli.h. * Since everywhere IOCB_ENTRY is used, the return value is cast, move the cast into the macro. - * Split ioctls out into seperate files + * Split ioctls out into separate files Changes from 20040326 to 20040402 @@ -1534,7 +1534,7 @@ Changes from 20040326 to 20040402 * Unused variable cleanup * Use Linux list macros for DMABUF_t * Break up ioctls into 3 sections, dfc, util, hbaapi - rearranged code so this could be easily seperated into a + rearranged code so this could be easily separated into a differnet module later All 3 are currently turned on by defines in lpfc_ioctl.c LPFC_DFC_IOCTL, LPFC_UTIL_IOCTL, LPFC_HBAAPI_IOCTL @@ -1551,7 +1551,7 @@ Changes from 20040326 to 20040402 started by lpfc_online(). lpfc_offline() only stopped els_timeout routine. It now stops all timeout routines associated with that hba. - * Replace seperate next and prev pointers in struct + * Replace separate next and prev pointers in struct lpfc_bindlist with list_head type. In elxHBA_t, replace fc_nlpbind_start and _end with fc_nlpbind_list and use list_head macros to access it. diff --git a/Documentation/trace/ftrace.txt b/Documentation/trace/ftrace.txt index bab3040da54..03485bfbd79 100644 --- a/Documentation/trace/ftrace.txt +++ b/Documentation/trace/ftrace.txt @@ -1588,7 +1588,7 @@ module author does not need to worry about it. When tracing is enabled, kstop_machine is called to prevent races with the CPUS executing code being modified (which can -cause the CPU to do undesireable things), and the nops are +cause the CPU to do undesirable things), and the nops are patched back to calls. But this time, they do not call mcount (which is just a function stub). They now call into the ftrace infrastructure. diff --git a/arch/arm/mach-ep93xx/micro9.c b/arch/arm/mach-ep93xx/micro9.c index f3757a1c5a1..c33360e8286 100644 --- a/arch/arm/mach-ep93xx/micro9.c +++ b/arch/arm/mach-ep93xx/micro9.c @@ -28,7 +28,7 @@ * * Micro9-High has up to 64MB of 32-bit flash on CS1 * Micro9-Mid has up to 64MB of either 32-bit or 16-bit flash on CS1 - * Micro9-Lite uses a seperate MTD map driver for flash support + * Micro9-Lite uses a separate MTD map driver for flash support * Micro9-Slim has up to 64MB of either 32-bit or 16-bit flash on CS1 *************************************************************************/ static struct physmap_flash_data micro9_flash_data; diff --git a/arch/arm/mach-nomadik/board-nhk8815.c b/arch/arm/mach-nomadik/board-nhk8815.c index 9438bf6613a..ab3712c86d2 100644 --- a/arch/arm/mach-nomadik/board-nhk8815.c +++ b/arch/arm/mach-nomadik/board-nhk8815.c @@ -38,7 +38,7 @@ #define SRC_CR_INIT_MASK 0x00007fff #define SRC_CR_INIT_VAL 0x2aaa8000 -/* These adresses span 16MB, so use three individual pages */ +/* These addresses span 16MB, so use three individual pages */ static struct resource nhk8815_nand_resources[] = { { .name = "nand_addr", diff --git a/arch/arm/mach-u300/core.c b/arch/arm/mach-u300/core.c index 653e25be3dd..d0cb5e94077 100644 --- a/arch/arm/mach-u300/core.c +++ b/arch/arm/mach-u300/core.c @@ -356,7 +356,7 @@ static struct resource ave_resources[] = { /* * The AVE3e requires two regions of 256MB that it considers * "invisible". The hardware will not be able to access these - * adresses, so they should never point to system RAM. + * addresses, so they should never point to system RAM. */ { .name = "AVE3e Reserved 0", @@ -571,7 +571,7 @@ static void __init u300_init_check_chip(void) /* * Some devices and their resources require reserved physical memory from * the end of the available RAM. This function traverses the list of devices - * and assigns actual adresses to these. + * and assigns actual addresses to these. */ static void __init u300_assign_physmem(void) { diff --git a/arch/arm/mach-u300/include/mach/debug-macro.S b/arch/arm/mach-u300/include/mach/debug-macro.S index f3a1cbbeeab..d591fe13ed1 100644 --- a/arch/arm/mach-u300/include/mach/debug-macro.S +++ b/arch/arm/mach-u300/include/mach/debug-macro.S @@ -11,7 +11,7 @@ #include .macro addruart,rx - /* If we move the adress using MMU, use this. */ + /* If we move the address using MMU, use this. */ mrc p15, 0, \rx, c1, c0 tst \rx, #1 @ MMU enabled? ldreq \rx, = U300_SLOW_PER_PHYS_BASE @ MMU off, physical address diff --git a/arch/arm/plat-s3c/include/plat/gpio-cfg-helpers.h b/arch/arm/plat-s3c/include/plat/gpio-cfg-helpers.h index 652e2bbdaa2..dda19da037a 100644 --- a/arch/arm/plat-s3c/include/plat/gpio-cfg-helpers.h +++ b/arch/arm/plat-s3c/include/plat/gpio-cfg-helpers.h @@ -78,7 +78,7 @@ extern int s3c_gpio_setcfg_s3c24xx_a(struct s3c_gpio_chip *chip, * others = Special functions (dependant on bank) * * Note, since the code to deal with the case where there are two control - * registers instead of one, we do not have a seperate set of functions for + * registers instead of one, we do not have a separate set of functions for * each case. */ extern int s3c_gpio_setcfg_s3c64xx_4bit(struct s3c_gpio_chip *chip, diff --git a/arch/arm/plat-s3c/include/plat/regs-usb-hsotg-phy.h b/arch/arm/plat-s3c/include/plat/regs-usb-hsotg-phy.h index 36a85f5000c..a111ad87183 100644 --- a/arch/arm/plat-s3c/include/plat/regs-usb-hsotg-phy.h +++ b/arch/arm/plat-s3c/include/plat/regs-usb-hsotg-phy.h @@ -12,7 +12,7 @@ * published by the Free Software Foundation. */ -/* Note, this is a seperate header file as some of the clock framework +/* Note, this is a separate header file as some of the clock framework * needs to touch this if the clk_48m is used as the USB OHCI or other * peripheral source. */ diff --git a/arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h b/arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h index 33d421d78ba..d623235ae96 100644 --- a/arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h +++ b/arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h @@ -135,7 +135,7 @@ struct s3c_cpufreq_config { * @locktime_m: The lock-time in uS for the MPLL. * @locktime_u: The lock-time in uS for the UPLL. * @locttime_bits: The number of bits each LOCKTIME field. - * @need_pll: Set if this driver needs to change the PLL values to acheive + * @need_pll: Set if this driver needs to change the PLL values to achieve * any frequency changes. This is really only need by devices like the * S3C2410 where there is no or limited divider between the PLL and the * ARMCLK. diff --git a/arch/cris/arch-v10/lib/old_checksum.c b/arch/cris/arch-v10/lib/old_checksum.c index 1734b467efa..8f79163f139 100644 --- a/arch/cris/arch-v10/lib/old_checksum.c +++ b/arch/cris/arch-v10/lib/old_checksum.c @@ -77,7 +77,7 @@ __wsum csum_partial(const void *p, int len, __wsum __sum) sum += *buff++; if (endMarker > buff) - sum += *(const u8 *)buff; /* add extra byte seperately */ + sum += *(const u8 *)buff; /* add extra byte separately */ BITOFF; return (__force __wsum)sum; diff --git a/arch/cris/arch-v32/mm/tlb.c b/arch/cris/arch-v32/mm/tlb.c index 6779bcb28ab..c030d020660 100644 --- a/arch/cris/arch-v32/mm/tlb.c +++ b/arch/cris/arch-v32/mm/tlb.c @@ -189,7 +189,7 @@ switch_mm(struct mm_struct *prev, struct mm_struct *next, spin_unlock(&mmu_context_lock); /* - * Remember the pgd for the fault handlers. Keep a seperate + * Remember the pgd for the fault handlers. Keep a separate * copy of it because current and active_mm might be invalid * at points where * there's still a need to derefer the pgd. */ diff --git a/arch/h8300/include/asm/io.h b/arch/h8300/include/asm/io.h index 33e842f3284..c1a8df22080 100644 --- a/arch/h8300/include/asm/io.h +++ b/arch/h8300/include/asm/io.h @@ -25,7 +25,7 @@ * memory location directly. */ /* ++roman: The assignments to temp. vars avoid that gcc sometimes generates - * two accesses to memory, which may be undesireable for some devices. + * two accesses to memory, which may be undesirable for some devices. */ /* diff --git a/arch/ia64/sn/kernel/setup.c b/arch/ia64/sn/kernel/setup.c index ece1bf99449..c6c6d938112 100644 --- a/arch/ia64/sn/kernel/setup.c +++ b/arch/ia64/sn/kernel/setup.c @@ -241,7 +241,7 @@ static void __cpuinit sn_check_for_wars(void) * Note: This stuff is duped here because Altix requires the PCDP to * locate a usable VGA device due to lack of proper ACPI support. Structures * could be used from drivers/firmware/pcdp.h, but it was decided that moving - * this file to a more public location just for Altix use was undesireable. + * this file to a more public location just for Altix use was undesirable. */ struct hcdp_uart_desc { diff --git a/arch/m68k/atari/atakeyb.c b/arch/m68k/atari/atakeyb.c index 4add96d13b1..5890897d28b 100644 --- a/arch/m68k/atari/atakeyb.c +++ b/arch/m68k/atari/atakeyb.c @@ -121,7 +121,7 @@ KEYBOARD_STATE kb_state; * bytes have been lost and in which state of the packet structure we are now. * This usually causes keyboards bytes to be interpreted as mouse movements * and vice versa, which is very annoying. It seems better to throw away some - * bytes (that are usually mouse bytes) than to misinterpret them. Therefor I + * bytes (that are usually mouse bytes) than to misinterpret them. Therefore I * introduced the RESYNC state for IKBD data. In this state, the bytes up to * one that really looks like a key event (0x04..0xf2) or the start of a mouse * packet (0xf8..0xfb) are thrown away, but at most 2 bytes. This at least diff --git a/arch/m68k/include/asm/io_no.h b/arch/m68k/include/asm/io_no.h index 359065d5a9f..6e2413e518c 100644 --- a/arch/m68k/include/asm/io_no.h +++ b/arch/m68k/include/asm/io_no.h @@ -16,7 +16,7 @@ * memory location directly. */ /* ++roman: The assignments to temp. vars avoid that gcc sometimes generates - * two accesses to memory, which may be undesireable for some devices. + * two accesses to memory, which may be undesirable for some devices. */ /* diff --git a/arch/powerpc/boot/dts/kmeter1.dts b/arch/powerpc/boot/dts/kmeter1.dts index 65b8b4f27ef..d8b5d12fb66 100644 --- a/arch/powerpc/boot/dts/kmeter1.dts +++ b/arch/powerpc/boot/dts/kmeter1.dts @@ -490,7 +490,7 @@ compatible = "cfi-flash"; /* * The Intel P30 chip has 2 non-identical chips on - * one die, so we need to define 2 seperate regions + * one die, so we need to define 2 separate regions * that are scanned by physmap_of independantly. */ reg = <0 0x00000000 0x02000000 diff --git a/arch/s390/include/asm/cio.h b/arch/s390/include/asm/cio.h index e85679af54d..e34347d567a 100644 --- a/arch/s390/include/asm/cio.h +++ b/arch/s390/include/asm/cio.h @@ -20,7 +20,7 @@ /** * struct ccw1 - channel command word * @cmd_code: command code - * @flags: flags, like IDA adressing, etc. + * @flags: flags, like IDA addressing, etc. * @count: byte count * @cda: data address * diff --git a/arch/s390/kernel/sclp.S b/arch/s390/kernel/sclp.S index e27ca63076d..27c1a2e236d 100644 --- a/arch/s390/kernel/sclp.S +++ b/arch/s390/kernel/sclp.S @@ -221,7 +221,7 @@ _sclp_print: lh %r9,0(%r8) # update sccb length ar %r9,%r6 sth %r9,0(%r8) - ar %r7,%r6 # update current mto adress + ar %r7,%r6 # update current mto address ltr %r0,%r0 # more characters? jnz .LinitmtoS4 l %r2,.LwritedataS4-.LbaseS4(%r13)# write data diff --git a/arch/sparc/kernel/leon_kernel.c b/arch/sparc/kernel/leon_kernel.c index 87f1760c0aa..554e0b80bcd 100644 --- a/arch/sparc/kernel/leon_kernel.c +++ b/arch/sparc/kernel/leon_kernel.c @@ -124,7 +124,7 @@ void __init leon_init_timers(irq_handler_t counter_fn) if (!(LEON3_BYPASS_LOAD_PA(&leon3_gptimer_regs->config) & (1< -/* return adress at 0 */ +/* return address at 0 */ #define in_blk 12 /* input byte array address parameter*/ #define out_blk 8 /* output byte array address parameter*/ @@ -230,8 +230,8 @@ twofish_enc_blk: push %edi mov tfm + 16(%esp), %ebp /* abuse the base pointer: set new base bointer to the crypto tfm */ - add $crypto_tfm_ctx_offset, %ebp /* ctx adress */ - mov in_blk+16(%esp),%edi /* input adress in edi */ + add $crypto_tfm_ctx_offset, %ebp /* ctx address */ + mov in_blk+16(%esp),%edi /* input address in edi */ mov (%edi), %eax mov b_offset(%edi), %ebx @@ -286,8 +286,8 @@ twofish_dec_blk: mov tfm + 16(%esp), %ebp /* abuse the base pointer: set new base bointer to the crypto tfm */ - add $crypto_tfm_ctx_offset, %ebp /* ctx adress */ - mov in_blk+16(%esp),%edi /* input adress in edi */ + add $crypto_tfm_ctx_offset, %ebp /* ctx address */ + mov in_blk+16(%esp),%edi /* input address in edi */ mov (%edi), %eax mov b_offset(%edi), %ebx diff --git a/arch/x86/crypto/twofish-x86_64-asm_64.S b/arch/x86/crypto/twofish-x86_64-asm_64.S index 35974a58661..573aa102542 100644 --- a/arch/x86/crypto/twofish-x86_64-asm_64.S +++ b/arch/x86/crypto/twofish-x86_64-asm_64.S @@ -221,11 +221,11 @@ twofish_enc_blk: pushq R1 - /* %rdi contains the crypto tfm adress */ - /* %rsi contains the output adress */ - /* %rdx contains the input adress */ - add $crypto_tfm_ctx_offset, %rdi /* set ctx adress */ - /* ctx adress is moved to free one non-rex register + /* %rdi contains the crypto tfm address */ + /* %rsi contains the output address */ + /* %rdx contains the input address */ + add $crypto_tfm_ctx_offset, %rdi /* set ctx address */ + /* ctx address is moved to free one non-rex register as target for the 8bit high operations */ mov %rdi, %r11 @@ -274,11 +274,11 @@ twofish_enc_blk: twofish_dec_blk: pushq R1 - /* %rdi contains the crypto tfm adress */ - /* %rsi contains the output adress */ - /* %rdx contains the input adress */ - add $crypto_tfm_ctx_offset, %rdi /* set ctx adress */ - /* ctx adress is moved to free one non-rex register + /* %rdi contains the crypto tfm address */ + /* %rsi contains the output address */ + /* %rdx contains the input address */ + add $crypto_tfm_ctx_offset, %rdi /* set ctx address */ + /* ctx address is moved to free one non-rex register as target for the 8bit high operations */ mov %rdi, %r11 diff --git a/arch/x86/kernel/head_64.S b/arch/x86/kernel/head_64.S index 2d8b5035371..3d1e6f16b7a 100644 --- a/arch/x86/kernel/head_64.S +++ b/arch/x86/kernel/head_64.S @@ -27,7 +27,7 @@ #define GET_CR2_INTO_RCX movq %cr2, %rcx #endif -/* we are not able to switch in one step to the final KERNEL ADRESS SPACE +/* we are not able to switch in one step to the final KERNEL ADDRESS SPACE * because we need identity-mapped pages. * */ diff --git a/arch/x86/kernel/pci-calgary_64.c b/arch/x86/kernel/pci-calgary_64.c index 2bbde607814..fb99f7edb34 100644 --- a/arch/x86/kernel/pci-calgary_64.c +++ b/arch/x86/kernel/pci-calgary_64.c @@ -1309,7 +1309,7 @@ static void calgary_init_bitmap_from_tce_table(struct iommu_table *tbl) /* * get_tce_space_from_tar(): * Function for kdump case. Get the tce tables from first kernel - * by reading the contents of the base adress register of calgary iommu + * by reading the contents of the base address register of calgary iommu */ static void __init get_tce_space_from_tar(void) { diff --git a/arch/x86/kernel/tsc.c b/arch/x86/kernel/tsc.c index 597683aa5ba..dec8f68e3ed 100644 --- a/arch/x86/kernel/tsc.c +++ b/arch/x86/kernel/tsc.c @@ -50,7 +50,7 @@ u64 native_sched_clock(void) * unstable. We do this because unlike Time Of Day, * the scheduler clock tolerates small errors and it's * very important for it to be as fast as the platform - * can achive it. ) + * can achieve it. ) */ if (unlikely(tsc_disabled)) { /* No locking but a rare wrong value is not a big deal: */ diff --git a/arch/xtensa/kernel/entry.S b/arch/xtensa/kernel/entry.S index 80d24c485fd..77fc9f6dc01 100644 --- a/arch/xtensa/kernel/entry.S +++ b/arch/xtensa/kernel/entry.S @@ -104,7 +104,7 @@ * excsave has been restored, and * stack pointer (a1) has been set. * - * Note: _user_exception might be at an odd adress. Don't use call0..call12 + * Note: _user_exception might be at an odd address. Don't use call0..call12 */ ENTRY(user_exception) @@ -244,7 +244,7 @@ _user_exception: * excsave has been restored, and * stack pointer (a1) has been set. * - * Note: _kernel_exception might be at an odd adress. Don't use call0..call12 + * Note: _kernel_exception might be at an odd address. Don't use call0..call12 */ ENTRY(kernel_exception) diff --git a/block/bsg.c b/block/bsg.c index a9fd2d84b53..46597a6bd11 100644 --- a/block/bsg.c +++ b/block/bsg.c @@ -260,7 +260,7 @@ bsg_map_hdr(struct bsg_device *bd, struct sg_io_v4 *hdr, fmode_t has_write_perm, return ERR_PTR(ret); /* - * map scatter-gather elements seperately and string them to request + * map scatter-gather elements separately and string them to request */ rq = blk_get_request(q, rw, GFP_KERNEL); if (!rq) diff --git a/drivers/acpi/dock.c b/drivers/acpi/dock.c index bbc2c1315c4..d7f363f9435 100644 --- a/drivers/acpi/dock.c +++ b/drivers/acpi/dock.c @@ -605,7 +605,7 @@ register_hotplug_dock_device(acpi_handle handle, struct acpi_dock_ops *ops, list_for_each_entry(dock_station, &dock_stations, sibling) { /* * An ATA bay can be in a dock and itself can be ejected - * seperately, so there are two 'dock stations' which need the + * separately, so there are two 'dock stations' which need the * ops */ dd = find_dock_dependent_device(dock_station, handle); diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c index 741065c9da6..7f2c94a07c0 100644 --- a/drivers/ata/libata-sff.c +++ b/drivers/ata/libata-sff.c @@ -2258,7 +2258,7 @@ EXPORT_SYMBOL_GPL(ata_sff_postreset); * @qc: command * * Drain the FIFO and device of any stuck data following a command - * failing to complete. In some cases this is neccessary before a + * failing to complete. In some cases this is necessary before a * reset will recover the device. * */ diff --git a/drivers/ata/pata_acpi.c b/drivers/ata/pata_acpi.c index d8f35fe4442..9e33da9565d 100644 --- a/drivers/ata/pata_acpi.c +++ b/drivers/ata/pata_acpi.c @@ -161,7 +161,7 @@ static void pacpi_set_dmamode(struct ata_port *ap, struct ata_device *adev) * * Called when the libata layer is about to issue a command. We wrap * this interface so that we can load the correct ATA timings if - * neccessary. + * necessary. */ static unsigned int pacpi_qc_issue(struct ata_queued_cmd *qc) diff --git a/drivers/ata/pata_hpt3x3.c b/drivers/ata/pata_hpt3x3.c index c86c71639a9..727a81ce4c9 100644 --- a/drivers/ata/pata_hpt3x3.c +++ b/drivers/ata/pata_hpt3x3.c @@ -180,7 +180,7 @@ static void hpt3x3_init_chipset(struct pci_dev *dev) * @id: Entry in match table * * Perform basic initialisation. We set the device up so we access all - * ports via BAR4. This is neccessary to work around errata. + * ports via BAR4. This is necessary to work around errata. */ static int hpt3x3_init_one(struct pci_dev *pdev, const struct pci_device_id *id) diff --git a/drivers/ata/pata_pcmcia.c b/drivers/ata/pata_pcmcia.c index 1b392c9e853..416aebb8b91 100644 --- a/drivers/ata/pata_pcmcia.c +++ b/drivers/ata/pata_pcmcia.c @@ -131,7 +131,7 @@ static unsigned int ata_data_xfer_8bit(struct ata_device *dev, * @qc: command * * Drain the FIFO and device of any stuck data following a command - * failing to complete. In some cases this is neccessary before a + * failing to complete. In some cases this is necessary before a * reset will recover the device. * */ diff --git a/drivers/block/drbd/drbd_int.h b/drivers/block/drbd/drbd_int.h index 2bf3a6ef368..d9301e861d9 100644 --- a/drivers/block/drbd/drbd_int.h +++ b/drivers/block/drbd/drbd_int.h @@ -95,7 +95,7 @@ extern char usermode_helper[]; /* All EEs on the free list should have ID_VACANT (== 0) * freshly allocated EEs get !ID_VACANT (== 1) - * so if it says "cannot dereference null pointer at adress 0x00000001", + * so if it says "cannot dereference null pointer at address 0x00000001", * it is most likely one of these :( */ #define ID_IN_SYNC (4711ULL) @@ -1171,7 +1171,7 @@ extern int drbd_bitmap_io(struct drbd_conf *mdev, int (*io_fn)(struct drbd_conf /* Meta data layout We reserve a 128MB Block (4k aligned) * either at the end of the backing device - * or on a seperate meta data device. */ + * or on a separate meta data device. */ #define MD_RESERVED_SECT (128LU << 11) /* 128 MB, unit sectors */ /* The following numbers are sectors */ diff --git a/drivers/block/drbd/drbd_req.h b/drivers/block/drbd/drbd_req.h index f22c1bc8ec7..16119d7056c 100644 --- a/drivers/block/drbd/drbd_req.h +++ b/drivers/block/drbd/drbd_req.h @@ -57,7 +57,7 @@ * * It may me handed over to the local disk subsystem. * It may be completed by the local disk subsystem, - * either sucessfully or with io-error. + * either successfully or with io-error. * In case it is a READ request, and it failed locally, * it may be retried remotely. * diff --git a/drivers/char/agp/intel-agp.c b/drivers/char/agp/intel-agp.c index 3999a5f25f3..45a22f9bfec 100644 --- a/drivers/char/agp/intel-agp.c +++ b/drivers/char/agp/intel-agp.c @@ -269,7 +269,7 @@ static void intel_agp_insert_sg_entries(struct agp_memory *mem, j++; } } else { - /* sg may merge pages, but we have to seperate + /* sg may merge pages, but we have to separate * per-page addr for GTT */ unsigned int len, m; diff --git a/drivers/char/applicom.c b/drivers/char/applicom.c index fe2cb2f5db1..a7424bf7eac 100644 --- a/drivers/char/applicom.c +++ b/drivers/char/applicom.c @@ -14,7 +14,7 @@ /* et passe en argument a acinit, mais est scrute sur le bus pour s'adapter */ /* au nombre de cartes presentes sur le bus. IOCL code 6 affichait V2.4.3 */ /* F.LAFORSE 28/11/95 creation de fichiers acXX.o avec les differentes */ -/* adresses de base des cartes, IOCTL 6 plus complet */ +/* addresses de base des cartes, IOCTL 6 plus complet */ /* J.PAGET le 19/08/96 copie de la version V2.6 en V2.8.0 sans modification */ /* de code autre que le texte V2.6.1 en V2.8.0 */ /*****************************************************************************/ diff --git a/drivers/char/hvc_iseries.c b/drivers/char/hvc_iseries.c index 936d05bf37f..0794925d804 100644 --- a/drivers/char/hvc_iseries.c +++ b/drivers/char/hvc_iseries.c @@ -353,7 +353,7 @@ static void hvc_close_event(struct HvLpEvent *event) if (!hvlpevent_is_int(event)) { printk(KERN_WARNING - "hvc: got unexpected close acknowlegement\n"); + "hvc: got unexpected close acknowledgement\n"); return; } diff --git a/drivers/char/hw_random/n2-drv.c b/drivers/char/hw_random/n2-drv.c index 9b3e09cd41f..10f868eefaa 100644 --- a/drivers/char/hw_random/n2-drv.c +++ b/drivers/char/hw_random/n2-drv.c @@ -71,7 +71,7 @@ MODULE_VERSION(DRV_MODULE_VERSION); * x22 + x21 + x17 + x15 + x13 + x12 + x11 + x7 + x5 + x + 1 * * The RNG_CTL_VCO value of each noise cell must be programmed - * seperately. This is why 4 control register values must be provided + * separately. This is why 4 control register values must be provided * to the hypervisor. During a write, the hypervisor writes them all, * one at a time, to the actual RNG_CTL register. The first three * values are used to setup the desired RNG_CTL_VCO for each entropy diff --git a/drivers/char/ip2/i2hw.h b/drivers/char/ip2/i2hw.h index 8aa6e7ab8d5..c0ba6c05f0c 100644 --- a/drivers/char/ip2/i2hw.h +++ b/drivers/char/ip2/i2hw.h @@ -559,7 +559,7 @@ Loadware may be sent to the board in two ways: 2) It may be hard-coded into your source by including a .h file (typically supplied by Computone), which declares a data array and initializes every - element. This acheives the same result as if an entire loadware file had + element. This achieves the same result as if an entire loadware file had been read into the array. This requires more data space in your program, but access to the file system diff --git a/drivers/char/pty.c b/drivers/char/pty.c index 385c44b3034..5ee42481726 100644 --- a/drivers/char/pty.c +++ b/drivers/char/pty.c @@ -220,7 +220,7 @@ static void pty_set_termios(struct tty_struct *tty, * @tty: tty being resized * @ws: window size being set. * - * Update the termios variables and send the neccessary signals to + * Update the termios variables and send the necessary signals to * peform a terminal resize correctly */ diff --git a/drivers/char/tty_io.c b/drivers/char/tty_io.c index c6f3b48be9d..56b11c1c7ae 100644 --- a/drivers/char/tty_io.c +++ b/drivers/char/tty_io.c @@ -2026,7 +2026,7 @@ static int tiocgwinsz(struct tty_struct *tty, struct winsize __user *arg) * @rows: rows (character) * @cols: cols (character) * - * Update the termios variables and send the neccessary signals to + * Update the termios variables and send the necessary signals to * peform a terminal resize correctly */ diff --git a/drivers/char/vt.c b/drivers/char/vt.c index 94f530a2969..bd1d1164fec 100644 --- a/drivers/char/vt.c +++ b/drivers/char/vt.c @@ -821,7 +821,7 @@ static inline int resize_screen(struct vc_data *vc, int width, int height, * * Resize a virtual console, clipping according to the actual constraints. * If the caller passes a tty structure then update the termios winsize - * information and perform any neccessary signal handling. + * information and perform any necessary signal handling. * * Caller must hold the console semaphore. Takes the termios mutex and * ctrl_lock of the tty IFF a tty is passed. diff --git a/drivers/dma/coh901318_lli.h b/drivers/dma/coh901318_lli.h index 7bf713b79c6..7a5c80990e9 100644 --- a/drivers/dma/coh901318_lli.h +++ b/drivers/dma/coh901318_lli.h @@ -30,7 +30,7 @@ struct device; * @pool: pool handle * @dev: dma device * @lli_nbr: number of lli:s in the pool - * @algin: adress alignemtn of lli:s + * @algin: address alignemtn of lli:s * returns 0 on success otherwise none zero */ int coh901318_pool_create(struct coh901318_pool *pool, diff --git a/drivers/gpu/drm/nouveau/nouveau_bios.c b/drivers/gpu/drm/nouveau/nouveau_bios.c index d7f8d8b4a4b..52fb371784e 100644 --- a/drivers/gpu/drm/nouveau/nouveau_bios.c +++ b/drivers/gpu/drm/nouveau/nouveau_bios.c @@ -3544,7 +3544,7 @@ int nouveau_bios_parse_lvds_table(struct drm_device *dev, int pxclk, bool *dl, b * at which modes should be set up in the dual link style. * * Following the header, the BMP (ver 0xa) table has several records, - * indexed by a seperate xlat table, indexed in turn by the fp strap in + * indexed by a separate xlat table, indexed in turn by the fp strap in * EXTDEV_BOOT. Each record had a config byte, followed by 6 script * numbers for use by INIT_SUB which controlled panel init and power, * and finally a dword of ms to sleep between power off and on diff --git a/drivers/gpu/drm/nouveau/nouveau_drv.h b/drivers/gpu/drm/nouveau/nouveau_drv.h index 6b9690418bc..23664058690 100644 --- a/drivers/gpu/drm/nouveau/nouveau_drv.h +++ b/drivers/gpu/drm/nouveau/nouveau_drv.h @@ -544,7 +544,7 @@ struct drm_nouveau_private { uint32_t ramro_offset; uint32_t ramro_size; - /* base physical adresses */ + /* base physical addresses */ uint64_t fb_phys; uint64_t fb_available_size; uint64_t fb_mappable_pages; diff --git a/drivers/gpu/drm/via/via_irq.c b/drivers/gpu/drm/via/via_irq.c index 5935b8842e8..34079f251cd 100644 --- a/drivers/gpu/drm/via/via_irq.c +++ b/drivers/gpu/drm/via/via_irq.c @@ -150,7 +150,7 @@ irqreturn_t via_driver_irq_handler(DRM_IRQ_ARGS) cur_irq++; } - /* Acknowlege interrupts */ + /* Acknowledge interrupts */ VIA_WRITE(VIA_REG_INTERRUPT, status); @@ -165,7 +165,7 @@ static __inline__ void viadrv_acknowledge_irqs(drm_via_private_t * dev_priv) u32 status; if (dev_priv) { - /* Acknowlege interrupts */ + /* Acknowledge interrupts */ status = VIA_READ(VIA_REG_INTERRUPT); VIA_WRITE(VIA_REG_INTERRUPT, status | dev_priv->irq_pending_mask); diff --git a/drivers/i2c/busses/i2c-pxa.c b/drivers/i2c/busses/i2c-pxa.c index 7647a20523a..90ffbf6f9d4 100644 --- a/drivers/i2c/busses/i2c-pxa.c +++ b/drivers/i2c/busses/i2c-pxa.c @@ -12,7 +12,7 @@ * * History: * Apr 2002: Initial version [CS] - * Jun 2002: Properly seperated algo/adap [FB] + * Jun 2002: Properly separated algo/adap [FB] * Jan 2003: Fixed several bugs concerning interrupt handling [Kai-Uwe Bloem] * Jan 2003: added limited signal handling [Kai-Uwe Bloem] * Sep 2004: Major rework to ensure efficient bus handling [RMK] diff --git a/drivers/infiniband/hw/ehca/ehca_qes.h b/drivers/infiniband/hw/ehca/ehca_qes.h index 5d28e3e98a2..90c4efa6758 100644 --- a/drivers/infiniband/hw/ehca/ehca_qes.h +++ b/drivers/infiniband/hw/ehca/ehca_qes.h @@ -46,7 +46,7 @@ #include "ehca_tools.h" -/* virtual scatter gather entry to specify remote adresses with length */ +/* virtual scatter gather entry to specify remote addresses with length */ struct ehca_vsgentry { u64 vaddr; u32 lkey; @@ -148,7 +148,7 @@ struct ehca_wqe { u32 immediate_data; union { struct { - u64 remote_virtual_adress; + u64 remote_virtual_address; u32 rkey; u32 reserved; u64 atomic_1st_op_dma_len; diff --git a/drivers/infiniband/hw/ehca/ehca_reqs.c b/drivers/infiniband/hw/ehca/ehca_reqs.c index e3ec7fdd67b..9a3fbfca9b4 100644 --- a/drivers/infiniband/hw/ehca/ehca_reqs.c +++ b/drivers/infiniband/hw/ehca/ehca_reqs.c @@ -269,7 +269,7 @@ static inline int ehca_write_swqe(struct ehca_qp *qp, /* no break is intentional here */ case IB_QPT_RC: /* TODO: atomic not implemented */ - wqe_p->u.nud.remote_virtual_adress = + wqe_p->u.nud.remote_virtual_address = send_wr->wr.rdma.remote_addr; wqe_p->u.nud.rkey = send_wr->wr.rdma.rkey; diff --git a/drivers/input/misc/yealink.h b/drivers/input/misc/yealink.h index 48af0be9cbd..1e0f5239701 100644 --- a/drivers/input/misc/yealink.h +++ b/drivers/input/misc/yealink.h @@ -127,7 +127,7 @@ struct yld_ctl_packet { * yld_status struct. */ -/* LCD, each segment must be driven seperately. +/* LCD, each segment must be driven separately. * * Layout: * diff --git a/drivers/isdn/i4l/isdn_common.c b/drivers/isdn/i4l/isdn_common.c index adb1e8c36b4..00c60e2e0ff 100644 --- a/drivers/isdn/i4l/isdn_common.c +++ b/drivers/isdn/i4l/isdn_common.c @@ -1347,7 +1347,7 @@ isdn_ioctl(struct inode *inode, struct file *file, uint cmd, ulong arg) /* * isdn net devices manage lots of configuration variables as linked lists. * Those lists must only be manipulated from user space. Some of the ioctl's - * service routines access user space and are not atomic. Therefor, ioctl's + * service routines access user space and are not atomic. Therefore, ioctl's * manipulating the lists and ioctl's sleeping while accessing the lists * are serialized by means of a semaphore. */ diff --git a/drivers/media/dvb/dvb-core/dvb_frontend.h b/drivers/media/dvb/dvb-core/dvb_frontend.h index 52e4ce4304e..80dda308ff7 100644 --- a/drivers/media/dvb/dvb-core/dvb_frontend.h +++ b/drivers/media/dvb/dvb-core/dvb_frontend.h @@ -214,14 +214,14 @@ struct dvb_tuner_ops { int (*get_status)(struct dvb_frontend *fe, u32 *status); int (*get_rf_strength)(struct dvb_frontend *fe, u16 *strength); - /** These are provided seperately from set_params in order to facilitate silicon - * tuners which require sophisticated tuning loops, controlling each parameter seperately. */ + /** These are provided separately from set_params in order to facilitate silicon + * tuners which require sophisticated tuning loops, controlling each parameter separately. */ int (*set_frequency)(struct dvb_frontend *fe, u32 frequency); int (*set_bandwidth)(struct dvb_frontend *fe, u32 bandwidth); /* - * These are provided seperately from set_params in order to facilitate silicon - * tuners which require sophisticated tuning loops, controlling each parameter seperately. + * These are provided separately from set_params in order to facilitate silicon + * tuners which require sophisticated tuning loops, controlling each parameter separately. */ int (*set_state)(struct dvb_frontend *fe, enum tuner_param param, struct tuner_state *state); int (*get_state)(struct dvb_frontend *fe, enum tuner_param param, struct tuner_state *state); diff --git a/drivers/media/video/bt8xx/bttv-cards.c b/drivers/media/video/bt8xx/bttv-cards.c index 12279f6d9bc..716870ae85d 100644 --- a/drivers/media/video/bt8xx/bttv-cards.c +++ b/drivers/media/video/bt8xx/bttv-cards.c @@ -4404,7 +4404,7 @@ static void rv605_muxsel(struct bttv *btv, unsigned int input) /* Tibet Systems 'Progress DVR' CS16 muxsel helper [Chris Fanning] * * The CS16 (available on eBay cheap) is a PCI board with four Fusion - * 878A chips, a PCI bridge, an Atmel microcontroller, four sync seperator + * 878A chips, a PCI bridge, an Atmel microcontroller, four sync separator * chips, ten eight input analog multiplexors, a not chip and a few * other components. * @@ -4426,7 +4426,7 @@ static void rv605_muxsel(struct bttv *btv, unsigned int input) * * There is an ATMEL microcontroller with an 8031 core on board. I have not * determined what function (if any) it provides. With the microcontroller - * and sync seperator chips a guess is that it might have to do with video + * and sync separator chips a guess is that it might have to do with video * switching and maybe some digital I/O. */ static void tibetCS16_muxsel(struct bttv *btv, unsigned int input) diff --git a/drivers/media/video/gspca/ov519.c b/drivers/media/video/gspca/ov519.c index b4f96573124..e5e4c4440d3 100644 --- a/drivers/media/video/gspca/ov519.c +++ b/drivers/media/video/gspca/ov519.c @@ -503,7 +503,7 @@ static const struct v4l2_pix_format ovfx2_ov3610_mode[] = { /* * The FX2 chip does not give us a zero length read at end of frame. * It does, however, give a short read at the end of a frame, if - * neccessary, rather than run two frames together. + * necessary, rather than run two frames together. * * By choosing the right bulk transfer size, we are guaranteed to always * get a short read for the last read of each frame. Frame sizes are diff --git a/drivers/media/video/pwc/philips.txt b/drivers/media/video/pwc/philips.txt index f9f3584281d..d38dd791511 100644 --- a/drivers/media/video/pwc/philips.txt +++ b/drivers/media/video/pwc/philips.txt @@ -33,7 +33,7 @@ a lot of extra information, a FAQ, and the binary plugin 'PWCX'. This plugin contains decompression routines that allow you to use higher image sizes and framerates; in addition the webcam uses less bandwidth on the USB bus (handy if you want to run more than 1 camera simultaneously). These routines fall -under a NDA, and may therefor not be distributed as source; however, its use +under a NDA, and may therefore not be distributed as source; however, its use is completely optional. You can build this code either into your kernel, or as a module. I recommend diff --git a/drivers/media/video/sn9c102/sn9c102_sensor.h b/drivers/media/video/sn9c102/sn9c102_sensor.h index 4af7382da5c..494957b10ba 100644 --- a/drivers/media/video/sn9c102/sn9c102_sensor.h +++ b/drivers/media/video/sn9c102/sn9c102_sensor.h @@ -120,7 +120,7 @@ extern int sn9c102_write_regs(struct sn9c102_device*, const u8 valreg[][2], /* Write multiple registers with constant values. For example: sn9c102_write_const_regs(cam, {0x00, 0x14}, {0x60, 0x17}, {0x0f, 0x18}); - Register adresses must be < 256. + Register addresses must be < 256. */ #define sn9c102_write_const_regs(sn9c102_device, data...) \ ({ static const u8 _valreg[][2] = {data}; \ diff --git a/drivers/media/video/tea6420.c b/drivers/media/video/tea6420.c index 0446524d354..6bf6bc7dbc7 100644 --- a/drivers/media/video/tea6420.c +++ b/drivers/media/video/tea6420.c @@ -6,7 +6,7 @@ The tea6420 is a bus controlled audio-matrix with 5 stereo inputs, 4 stereo outputs and gain control for each output. - It is cascadable, i.e. it can be found at the adresses 0x98 + It is cascadable, i.e. it can be found at the addresses 0x98 and 0x9a on the i2c-bus. For detailed informations download the specifications directly diff --git a/drivers/mfd/sm501.c b/drivers/mfd/sm501.c index 0cc5eeff5ee..10491e4e305 100644 --- a/drivers/mfd/sm501.c +++ b/drivers/mfd/sm501.c @@ -523,7 +523,7 @@ unsigned long sm501_set_clock(struct device *dev, unsigned long clock = readl(sm->regs + SM501_CURRENT_CLOCK); unsigned char reg; unsigned int pll_reg = 0; - unsigned long sm501_freq; /* the actual frequency acheived */ + unsigned long sm501_freq; /* the actual frequency achieved */ struct sm501_clock to; @@ -533,7 +533,7 @@ unsigned long sm501_set_clock(struct device *dev, switch (clksrc) { case SM501_CLOCK_P2XCLK: - /* This clock is divided in half so to achive the + /* This clock is divided in half so to achieve the * requested frequency the value must be multiplied by * 2. This clock also has an additional pre divisor */ @@ -562,7 +562,7 @@ unsigned long sm501_set_clock(struct device *dev, break; case SM501_CLOCK_V2XCLK: - /* This clock is divided in half so to achive the + /* This clock is divided in half so to achieve the * requested frequency the value must be multiplied by 2. */ sm501_freq = (sm501_select_clock(2 * req_freq, &to, 3) / 2); @@ -648,7 +648,7 @@ unsigned long sm501_find_clock(struct device *dev, unsigned long req_freq) { struct sm501_devdata *sm = dev_get_drvdata(dev); - unsigned long sm501_freq; /* the frequency achiveable by the 501 */ + unsigned long sm501_freq; /* the frequency achieveable by the 501 */ struct sm501_clock to; switch (clksrc) { diff --git a/drivers/mmc/host/mxcmmc.c b/drivers/mmc/host/mxcmmc.c index 60a2b69e54f..16cc91c827c 100644 --- a/drivers/mmc/host/mxcmmc.c +++ b/drivers/mmc/host/mxcmmc.c @@ -4,7 +4,7 @@ * This is a driver for the SDHC controller found in Freescale MX2/MX3 * SoCs. It is basically the same hardware as found on MX1 (imxmmc.c). * Unlike the hardware found on MX1, this hardware just works and does - * not need all the quirks found in imxmmc.c, hence the seperate driver. + * not need all the quirks found in imxmmc.c, hence the separate driver. * * Copyright (C) 2008 Sascha Hauer, Pengutronix * Copyright (C) 2006 Pavel Pisa, PiKRON diff --git a/drivers/mtd/chips/jedec_probe.c b/drivers/mtd/chips/jedec_probe.c index 1bec5e1ce6a..8db1148dfa4 100644 --- a/drivers/mtd/chips/jedec_probe.c +++ b/drivers/mtd/chips/jedec_probe.c @@ -226,7 +226,7 @@ struct unlock_addr { * exists, but is for MTD_UADDR_NOT_SUPPORTED - and, therefore, * should not be used. The problem is that structures with * initializers have extra fields initialized to 0. It is _very_ - * desireable to have the unlock address entries for unsupported + * desirable to have the unlock address entries for unsupported * data widths automatically initialized - that means that * MTD_UADDR_NOT_SUPPORTED must be 0 and the first entry here * must go unused. diff --git a/drivers/mtd/nand/bcm_umi_nand.c b/drivers/mtd/nand/bcm_umi_nand.c index 087bcd745bb..7d1cca7a31a 100644 --- a/drivers/mtd/nand/bcm_umi_nand.c +++ b/drivers/mtd/nand/bcm_umi_nand.c @@ -381,7 +381,7 @@ static int __devinit bcm_umi_nand_probe(struct platform_device *pdev) if (!r) return -ENXIO; - /* map physical adress */ + /* map physical address */ bcm_umi_io_base = ioremap(r->start, r->end - r->start + 1); if (!bcm_umi_io_base) { @@ -525,7 +525,7 @@ static int bcm_umi_nand_remove(struct platform_device *pdev) /* Release resources, unregister device */ nand_release(board_mtd); - /* unmap physical adress */ + /* unmap physical address */ iounmap(bcm_umi_io_base); /* Free the MTD device structure */ diff --git a/drivers/mtd/nand/mxc_nand.c b/drivers/mtd/nand/mxc_nand.c index 45dec5770da..b2900d8406d 100644 --- a/drivers/mtd/nand/mxc_nand.c +++ b/drivers/mtd/nand/mxc_nand.c @@ -507,7 +507,7 @@ static void mxc_do_addr_cycle(struct mtd_info *mtd, int column, int page_addr) * MXC NANDFC can only perform full page+spare or * spare-only read/write. When the upper layers * layers perform a read/write buf operation, - * we will used the saved column adress to index into + * we will used the saved column address to index into * the full page. */ send_addr(host, 0, page_addr == -1); diff --git a/drivers/net/atlx/atl2.h b/drivers/net/atlx/atl2.h index d918bbe621e..927e4de6474 100644 --- a/drivers/net/atlx/atl2.h +++ b/drivers/net/atlx/atl2.h @@ -442,7 +442,7 @@ struct atl2_hw { struct atl2_ring_header { /* pointer to the descriptor ring memory */ void *desc; - /* physical adress of the descriptor ring */ + /* physical address of the descriptor ring */ dma_addr_t dma; /* length of descriptor ring in bytes */ unsigned int size; diff --git a/drivers/net/chelsio/sge.c b/drivers/net/chelsio/sge.c index 109d2783e4d..bef02330464 100644 --- a/drivers/net/chelsio/sge.c +++ b/drivers/net/chelsio/sge.c @@ -248,7 +248,7 @@ static void restart_sched(unsigned long); * * Interrupts are handled by a single CPU and it is likely that on a MP system * the application is migrated to another CPU. In that scenario, we try to - * seperate the RX(in irq context) and TX state in order to decrease memory + * separate the RX(in irq context) and TX state in order to decrease memory * contention. */ struct sge { diff --git a/drivers/net/e1000e/82571.c b/drivers/net/e1000e/82571.c index 02d67d047d9..dc4eb87309c 100644 --- a/drivers/net/e1000e/82571.c +++ b/drivers/net/e1000e/82571.c @@ -1363,7 +1363,7 @@ static s32 e1000_setup_fiber_serdes_link_82571(struct e1000_hw *hw) * * 1) down * 2) autoneg_progress - * 3) autoneg_complete (the link sucessfully autonegotiated) + * 3) autoneg_complete (the link successfully autonegotiated) * 4) forced_up (the link has been forced up, it did not autonegotiate) * **/ diff --git a/drivers/net/e1000e/lib.c b/drivers/net/e1000e/lib.c index 2fa9b36a2c5..3af0b1b8283 100644 --- a/drivers/net/e1000e/lib.c +++ b/drivers/net/e1000e/lib.c @@ -587,7 +587,7 @@ s32 e1000e_check_for_serdes_link(struct e1000_hw *hw) if (!(rxcw & E1000_RXCW_IV)) { mac->serdes_has_link = true; e_dbg("SERDES: Link up - autoneg " - "completed sucessfully.\n"); + "completed successfully.\n"); } else { mac->serdes_has_link = false; e_dbg("SERDES: Link down - invalid" diff --git a/drivers/net/igb/igb_main.c b/drivers/net/igb/igb_main.c index 997124d2992..e2ce8f8a21a 100644 --- a/drivers/net/igb/igb_main.c +++ b/drivers/net/igb/igb_main.c @@ -674,7 +674,7 @@ static void igb_set_interrupt_capability(struct igb_adapter *adapter) /* start with one vector for every rx queue */ numvecs = adapter->num_rx_queues; - /* if tx handler is seperate add 1 for every tx queue */ + /* if tx handler is separate add 1 for every tx queue */ if (!(adapter->flags & IGB_FLAG_QUEUE_PAIRS)) numvecs += adapter->num_tx_queues; diff --git a/drivers/net/irda/sa1100_ir.c b/drivers/net/irda/sa1100_ir.c index c412e802617..1dcdce0631a 100644 --- a/drivers/net/irda/sa1100_ir.c +++ b/drivers/net/irda/sa1100_ir.c @@ -331,7 +331,7 @@ static int sa1100_irda_resume(struct platform_device *pdev) * If we missed a speed change, initialise at the new speed * directly. It is debatable whether this is actually * required, but in the interests of continuing from where - * we left off it is desireable. The converse argument is + * we left off it is desirable. The converse argument is * that we should re-negotiate at 9600 baud again. */ if (si->newspeed) { diff --git a/drivers/net/qlge/qlge_ethtool.c b/drivers/net/qlge/qlge_ethtool.c index 058fa0a48c6..b8d21ab212c 100644 --- a/drivers/net/qlge/qlge_ethtool.c +++ b/drivers/net/qlge/qlge_ethtool.c @@ -402,7 +402,7 @@ static int ql_set_wol(struct net_device *ndev, struct ethtool_wolinfo *wol) u32 wol = 0; status = ql_mb_wol_mode(qdev, wol); QPRINTK(qdev, DRV, ERR, "WOL %s (wol code 0x%x) on %s\n", - (status == 0) ? "cleared sucessfully" : "clear failed", + (status == 0) ? "cleared successfully" : "clear failed", wol, qdev->ndev->name); } diff --git a/drivers/net/qlge/qlge_main.c b/drivers/net/qlge/qlge_main.c index 894a7c84fae..a35845b48ea 100644 --- a/drivers/net/qlge/qlge_main.c +++ b/drivers/net/qlge/qlge_main.c @@ -3517,7 +3517,7 @@ int ql_wol(struct ql_adapter *qdev) wol |= MB_WOL_MODE_ON; status = ql_mb_wol_mode(qdev, wol); QPRINTK(qdev, DRV, ERR, "WOL %s (wol code 0x%x) on %s\n", - (status == 0) ? "Sucessfully set" : "Failed", wol, + (status == 0) ? "Successfully set" : "Failed", wol, qdev->ndev->name); } diff --git a/drivers/net/sfc/regs.h b/drivers/net/sfc/regs.h index 89d606fe924..18a3be42834 100644 --- a/drivers/net/sfc/regs.h +++ b/drivers/net/sfc/regs.h @@ -95,7 +95,7 @@ #define FRF_AA_INT_ACK_KER_FIELD_LBN 0 #define FRF_AA_INT_ACK_KER_FIELD_WIDTH 32 -/* INT_ISR0_REG: Function 0 Interrupt Acknowlege Status register */ +/* INT_ISR0_REG: Function 0 Interrupt Acknowledge Status register */ #define FR_BZ_INT_ISR0 0x00000090 #define FRF_BZ_INT_ISR_REG_LBN 0 #define FRF_BZ_INT_ISR_REG_WIDTH 64 diff --git a/drivers/net/smsc9420.c b/drivers/net/smsc9420.c index 12f0f5d74e3..2ae1972bcb4 100644 --- a/drivers/net/smsc9420.c +++ b/drivers/net/smsc9420.c @@ -1348,7 +1348,7 @@ static int smsc9420_open(struct net_device *dev) netif_carrier_off(dev); - /* disable, mask and acknowlege all interrupts */ + /* disable, mask and acknowledge all interrupts */ spin_lock_irqsave(&pd->int_lock, flags); int_cfg = smsc9420_reg_read(pd, INT_CFG) & (~INT_CFG_IRQ_EN_); smsc9420_reg_write(pd, INT_CFG, int_cfg); diff --git a/drivers/net/spider_net.c b/drivers/net/spider_net.c index 218524857bf..839b1f065d3 100644 --- a/drivers/net/spider_net.c +++ b/drivers/net/spider_net.c @@ -474,7 +474,7 @@ spider_net_prepare_rx_descr(struct spider_net_card *card, * spider_net_enable_rxchtails - sets RX dmac chain tail addresses * @card: card structure * - * spider_net_enable_rxchtails sets the RX DMAC chain tail adresses in the + * spider_net_enable_rxchtails sets the RX DMAC chain tail addresses in the * chip by writing to the appropriate register. DMA is enabled in * spider_net_enable_rxdmac. */ @@ -1820,7 +1820,7 @@ spider_net_enable_card(struct spider_net_card *card) spider_net_write_reg(card, SPIDER_NET_ECMODE, SPIDER_NET_ECMODE_VALUE); - /* set chain tail adress for RX chains and + /* set chain tail address for RX chains and * enable DMA */ spider_net_enable_rxchtails(card); spider_net_enable_rxdmac(card); diff --git a/drivers/net/sungem.c b/drivers/net/sungem.c index b571a1babab..a88fcb39ba1 100644 --- a/drivers/net/sungem.c +++ b/drivers/net/sungem.c @@ -782,7 +782,7 @@ static int gem_rx(struct gem *gp, int work_to_do) break; /* When writing back RX descriptor, GEM writes status - * then buffer address, possibly in seperate transactions. + * then buffer address, possibly in separate transactions. * If we don't wait for the chip to write both, we could * post a new buffer to this descriptor then have GEM spam * on the buffer address. We sync on the RX completion diff --git a/drivers/net/tehuti.c b/drivers/net/tehuti.c index 80b404f2b93..ed4e9c42935 100644 --- a/drivers/net/tehuti.c +++ b/drivers/net/tehuti.c @@ -1857,7 +1857,7 @@ static void bdx_tx_push_desc(struct bdx_priv *priv, void *data, int size) * @data - desc's data * @size - desc's size * - * NOTE: this func does check for available space and, if neccessary, waits for + * NOTE: this func does check for available space and, if necessary, waits for * NIC to read existing data before writing new one. */ static void bdx_tx_push_desc_safe(struct bdx_priv *priv, void *data, int size) diff --git a/drivers/net/tokenring/tms380tr.c b/drivers/net/tokenring/tms380tr.c index e3c42f5ac4a..4e4c402319c 100644 --- a/drivers/net/tokenring/tms380tr.c +++ b/drivers/net/tokenring/tms380tr.c @@ -693,7 +693,7 @@ static netdev_tx_t tms380tr_hardware_send_packet(struct sk_buff *skb, * NOTE: This function should be used whenever the status of any TPL must be * modified by the driver, because the compiler may otherwise change the * order of instructions such that writing the TPL status may be executed at - * an undesireable time. When this function is used, the status is always + * an undesirable time. When this function is used, the status is always * written when the function is called. */ static void tms380tr_write_tpl_status(TPL *tpl, unsigned int Status) @@ -2266,7 +2266,7 @@ static void tms380tr_rcv_status_irq(struct net_device *dev) * This function should be used whenever the status of any RPL must be * modified by the driver, because the compiler may otherwise change the * order of instructions such that writing the RPL status may be executed - * at an undesireable time. When this function is used, the status is + * at an undesirable time. When this function is used, the status is * always written when the function is called. */ static void tms380tr_write_rpl_status(RPL *rpl, unsigned int Status) diff --git a/drivers/net/tun.c b/drivers/net/tun.c index 2834a01bae2..e572ecc09a4 100644 --- a/drivers/net/tun.c +++ b/drivers/net/tun.c @@ -1365,7 +1365,7 @@ static int tun_chr_close(struct inode *inode, struct file *file) __tun_detach(tun); - /* If desireable, unregister the netdevice. */ + /* If desirable, unregister the netdevice. */ if (!(tun->flags & TUN_PERSIST)) { rtnl_lock(); if (dev->reg_state == NETREG_REGISTERED) diff --git a/drivers/net/ucc_geth.c b/drivers/net/ucc_geth.c index eb8fe7e16c6..8eec97799e0 100644 --- a/drivers/net/ucc_geth.c +++ b/drivers/net/ucc_geth.c @@ -429,7 +429,7 @@ static void hw_add_addr_in_hash(struct ucc_geth_private *ugeth, ucc_fast_get_qe_cr_subblock(ugeth->ug_info->uf_info.ucc_num); /* Ethernet frames are defined in Little Endian mode, - therefor to insert */ + therefore to insert */ /* the address to the hash (Big Endian mode), we reverse the bytes.*/ set_mac_addr(&p_82xx_addr_filt->taddr.h, p_enet_addr); diff --git a/drivers/net/wimax/i2400m/fw.c b/drivers/net/wimax/i2400m/fw.c index 64cdfeb299c..6c459f5cb5d 100644 --- a/drivers/net/wimax/i2400m/fw.c +++ b/drivers/net/wimax/i2400m/fw.c @@ -612,7 +612,7 @@ ssize_t i2400m_bm_cmd(struct i2400m *i2400m, goto error_wait_for_ack; } rx_bytes = result; - /* verify the ack and read more if neccessary [result is the + /* verify the ack and read more if necessary [result is the * final amount of bytes we get in the ack] */ result = __i2400m_bm_ack_verify(i2400m, opcode, ack, ack_size, flags); if (result < 0) diff --git a/drivers/net/wimax/i2400m/i2400m.h b/drivers/net/wimax/i2400m/i2400m.h index 04df9bbe340..820b128705e 100644 --- a/drivers/net/wimax/i2400m/i2400m.h +++ b/drivers/net/wimax/i2400m/i2400m.h @@ -627,7 +627,7 @@ enum i2400m_bm_cmd_flags { * @I2400M_BRI_NO_REBOOT: Do not reboot the device and proceed * directly to wait for a reboot barker from the device. * @I2400M_BRI_MAC_REINIT: We need to reinitialize the boot - * rom after reading the MAC adress. This is quite a dirty hack, + * rom after reading the MAC address. This is quite a dirty hack, * if you ask me -- the device requires the bootrom to be * intialized after reading the MAC address. */ diff --git a/drivers/net/wimax/i2400m/sdio.c b/drivers/net/wimax/i2400m/sdio.c index 76a50ac02eb..14f876b1358 100644 --- a/drivers/net/wimax/i2400m/sdio.c +++ b/drivers/net/wimax/i2400m/sdio.c @@ -304,7 +304,7 @@ error_kzalloc: * * The device will be fully reset internally, but won't be * disconnected from the bus (so no reenumeration will - * happen). Firmware upload will be neccessary. + * happen). Firmware upload will be necessary. * * The device will send a reboot barker that will trigger the driver * to reinitialize the state via __i2400m_dev_reset_handle. @@ -314,7 +314,7 @@ error_kzalloc: * * The device will be fully reset internally, disconnected from the * bus an a reenumeration will happen. Firmware upload will be - * neccessary. Thus, we don't do any locking or struct + * necessary. Thus, we don't do any locking or struct * reinitialization, as we are going to be fully disconnected and * reenumerated. * diff --git a/drivers/net/wimax/i2400m/usb.c b/drivers/net/wimax/i2400m/usb.c index 98f4f8c5fb6..99f04c47589 100644 --- a/drivers/net/wimax/i2400m/usb.c +++ b/drivers/net/wimax/i2400m/usb.c @@ -246,7 +246,7 @@ error_kzalloc: * * The device will be fully reset internally, but won't be * disconnected from the USB bus (so no reenumeration will - * happen). Firmware upload will be neccessary. + * happen). Firmware upload will be necessary. * * The device will send a reboot barker in the notification endpoint * that will trigger the driver to reinitialize the state @@ -257,7 +257,7 @@ error_kzalloc: * * The device will be fully reset internally, disconnected from the * USB bus an a reenumeration will happen. Firmware upload will be - * neccessary. Thus, we don't do any locking or struct + * necessary. Thus, we don't do any locking or struct * reinitialization, as we are going to be fully disconnected and * reenumerated. * diff --git a/drivers/net/wireless/ath/ar9170/main.c b/drivers/net/wireless/ath/ar9170/main.c index f9d6db8d013..46a1e19c678 100644 --- a/drivers/net/wireless/ath/ar9170/main.c +++ b/drivers/net/wireless/ath/ar9170/main.c @@ -2535,7 +2535,7 @@ void *ar9170_alloc(size_t priv_size) /* * this buffer is used for rx stream reconstruction. * Under heavy load this device (or the transport layer?) - * tends to split the streams into seperate rx descriptors. + * tends to split the streams into separate rx descriptors. */ skb = __dev_alloc_skb(AR9170_MAX_RX_BUFFER_SIZE, GFP_KERNEL); diff --git a/drivers/net/wireless/iwmc3200wifi/lmac.h b/drivers/net/wireless/iwmc3200wifi/lmac.h index a3a79b5e289..a855a99e49b 100644 --- a/drivers/net/wireless/iwmc3200wifi/lmac.h +++ b/drivers/net/wireless/iwmc3200wifi/lmac.h @@ -262,7 +262,7 @@ struct iwm_ct_kill_cfg_cmd { /* Power Management */ #define POWER_TABLE_CMD 0x77 -#define SAVE_RESTORE_ADRESS_CMD 0x78 +#define SAVE_RESTORE_ADDRESS_CMD 0x78 #define REPLY_WATERMARK_CMD 0x79 #define PM_DEBUG_STATISTIC_NOTIFIC 0x7B #define PD_FLUSH_N_NOTIFICATION 0x7C diff --git a/drivers/net/wireless/rt2x00/rt2500usb.c b/drivers/net/wireless/rt2x00/rt2500usb.c index 83f2592c59d..486c93559c2 100644 --- a/drivers/net/wireless/rt2x00/rt2500usb.c +++ b/drivers/net/wireless/rt2x00/rt2500usb.c @@ -368,7 +368,7 @@ static int rt2500usb_config_key(struct rt2x00_dev *rt2x00dev, /* * The encryption key doesn't fit within the CSR cache, - * this means we should allocate it seperately and use + * this means we should allocate it separately and use * rt2x00usb_vendor_request() to send the key to the hardware. */ reg = KEY_ENTRY(key->hw_key_idx); @@ -382,7 +382,7 @@ static int rt2500usb_config_key(struct rt2x00_dev *rt2x00dev, /* * The driver does not support the IV/EIV generation * in hardware. However it demands the data to be provided - * both seperately as well as inside the frame. + * both separately as well as inside the frame. * We already provided the CONFIG_CRYPTO_COPY_IV to rt2x00lib * to ensure rt2x00lib will not strip the data from the * frame after the copy, now we must tell mac80211 diff --git a/drivers/net/wireless/rt2x00/rt2800usb.c b/drivers/net/wireless/rt2x00/rt2800usb.c index ab95346cf6a..2e5c8a13758 100644 --- a/drivers/net/wireless/rt2x00/rt2800usb.c +++ b/drivers/net/wireless/rt2x00/rt2800usb.c @@ -100,7 +100,7 @@ static int rt2800usb_check_firmware(struct rt2x00_dev *rt2x00dev, * There are 2 variations of the rt2870 firmware. * a) size: 4kb * b) size: 8kb - * Note that (b) contains 2 seperate firmware blobs of 4k + * Note that (b) contains 2 separate firmware blobs of 4k * within the file. The first blob is the same firmware as (a), * but the second blob is for the additional chipsets. */ @@ -118,7 +118,7 @@ static int rt2800usb_check_firmware(struct rt2x00_dev *rt2x00dev, /* * 8kb firmware files must be checked as if it were - * 2 seperate firmware files. + * 2 separate firmware files. */ while (offset < len) { if (!rt2800usb_check_crc(data + offset, 4096)) diff --git a/drivers/net/wireless/rt2x00/rt2x00debug.c b/drivers/net/wireless/rt2x00/rt2x00debug.c index 7d323a763b5..afee806affc 100644 --- a/drivers/net/wireless/rt2x00/rt2x00debug.c +++ b/drivers/net/wireless/rt2x00/rt2x00debug.c @@ -109,7 +109,7 @@ struct rt2x00debug_intf { /* * HW crypto statistics. - * All statistics are stored seperately per cipher type. + * All statistics are stored separately per cipher type. */ struct rt2x00debug_crypto crypto_stats[CIPHER_MAX]; diff --git a/drivers/net/wireless/rt2x00/rt2x00dev.c b/drivers/net/wireless/rt2x00/rt2x00dev.c index 265e66dba55..5e1d5167fff 100644 --- a/drivers/net/wireless/rt2x00/rt2x00dev.c +++ b/drivers/net/wireless/rt2x00/rt2x00dev.c @@ -397,7 +397,7 @@ void rt2x00lib_rxdone(struct rt2x00_dev *rt2x00dev, /* * Hardware might have stripped the IV/EIV/ICV data, * in that case it is possible that the data was - * provided seperately (through hardware descriptor) + * provided separately (through hardware descriptor) * in which case we should reinsert the data into the frame. */ if ((rxdesc.dev_flags & RXDONE_CRYPTO_IV) && diff --git a/drivers/net/wireless/rt2x00/rt2x00queue.c b/drivers/net/wireless/rt2x00/rt2x00queue.c index 9915a09141e..38ffca9b0fe 100644 --- a/drivers/net/wireless/rt2x00/rt2x00queue.c +++ b/drivers/net/wireless/rt2x00/rt2x00queue.c @@ -502,7 +502,7 @@ int rt2x00queue_write_tx_frame(struct data_queue *queue, struct sk_buff *skb, /* * When hardware encryption is supported, and this frame * is to be encrypted, we should strip the IV/EIV data from - * the frame so we can provide it to the driver seperately. + * the frame so we can provide it to the driver separately. */ if (test_bit(ENTRY_TXD_ENCRYPT, &txdesc.flags) && !test_bit(ENTRY_TXD_ENCRYPT_IV, &txdesc.flags)) { diff --git a/drivers/net/wireless/rt2x00/rt61pci.c b/drivers/net/wireless/rt2x00/rt61pci.c index 0ca589306d7..99459db61ef 100644 --- a/drivers/net/wireless/rt2x00/rt61pci.c +++ b/drivers/net/wireless/rt2x00/rt61pci.c @@ -476,7 +476,7 @@ static int rt61pci_config_pairwise_key(struct rt2x00_dev *rt2x00dev, * The driver does not support the IV/EIV generation * in hardware. However it doesn't support the IV/EIV * inside the ieee80211 frame either, but requires it - * to be provided seperately for the descriptor. + * to be provided separately for the descriptor. * rt2x00lib will cut the IV/EIV data out of all frames * given to us by mac80211, but we must tell mac80211 * to generate the IV/EIV data. diff --git a/drivers/net/wireless/rt2x00/rt73usb.c b/drivers/net/wireless/rt2x00/rt73usb.c index ced3b6ab5e1..527368a45fd 100644 --- a/drivers/net/wireless/rt2x00/rt73usb.c +++ b/drivers/net/wireless/rt2x00/rt73usb.c @@ -339,7 +339,7 @@ static int rt73usb_config_shared_key(struct rt2x00_dev *rt2x00dev, * The driver does not support the IV/EIV generation * in hardware. However it doesn't support the IV/EIV * inside the ieee80211 frame either, but requires it - * to be provided seperately for the descriptor. + * to be provided separately for the descriptor. * rt2x00lib will cut the IV/EIV data out of all frames * given to us by mac80211, but we must tell mac80211 * to generate the IV/EIV data. @@ -439,7 +439,7 @@ static int rt73usb_config_pairwise_key(struct rt2x00_dev *rt2x00dev, * The driver does not support the IV/EIV generation * in hardware. However it doesn't support the IV/EIV * inside the ieee80211 frame either, but requires it - * to be provided seperately for the descriptor. + * to be provided separately for the descriptor. * rt2x00lib will cut the IV/EIV data out of all frames * given to us by mac80211, but we must tell mac80211 * to generate the IV/EIV data. @@ -1665,7 +1665,7 @@ static void rt73usb_fill_rxdone(struct queue_entry *entry, /* * Hardware has stripped IV/EIV data from 802.11 frame during - * decryption. It has provided the data seperately but rt2x00lib + * decryption. It has provided the data separately but rt2x00lib * should decide if it should be reinserted. */ rxdesc->flags |= RX_FLAG_IV_STRIPPED; diff --git a/drivers/s390/char/raw3270.c b/drivers/s390/char/raw3270.c index 62ddf5202b7..2a4c566456e 100644 --- a/drivers/s390/char/raw3270.c +++ b/drivers/s390/char/raw3270.c @@ -373,7 +373,7 @@ raw3270_irq (struct ccw_device *cdev, unsigned long intparm, struct irb *irb) rq->rc = ccw_device_start(rp->cdev, &rq->ccw, (unsigned long) rq, 0, 0); if (rq->rc == 0) - return; /* Sucessfully restarted. */ + return; /* Successfully restarted. */ break; case RAW3270_IO_STOP: if (!rq) diff --git a/drivers/s390/char/sclp.c b/drivers/s390/char/sclp.c index ec88c59842e..f6d72e1f2a3 100644 --- a/drivers/s390/char/sclp.c +++ b/drivers/s390/char/sclp.c @@ -196,7 +196,7 @@ __sclp_start_request(struct sclp_req *req) req->start_count++; if (rc == 0) { - /* Sucessfully started request */ + /* Successfully started request */ req->status = SCLP_REQ_RUNNING; sclp_running_state = sclp_running_state_running; __sclp_set_request_timer(SCLP_RETRY_INTERVAL * HZ, diff --git a/drivers/scsi/a100u2w.c b/drivers/scsi/a100u2w.c index 208d6df9ed5..ff5716d5f04 100644 --- a/drivers/scsi/a100u2w.c +++ b/drivers/scsi/a100u2w.c @@ -492,7 +492,7 @@ static void init_alloc_map(struct orc_host * host) * init_orchid - initialise the host adapter * @host:host adapter to initialise * - * Initialise the controller and if neccessary load the firmware. + * Initialise the controller and if necessary load the firmware. * * Returns -1 if the initialisation fails. */ diff --git a/drivers/scsi/initio.c b/drivers/scsi/initio.c index 89a59484be0..a7714160fbc 100644 --- a/drivers/scsi/initio.c +++ b/drivers/scsi/initio.c @@ -531,7 +531,7 @@ static void initio_read_eeprom(unsigned long base) * initio_stop_bm - stop bus master * @host: InitIO we are stopping * - * Stop any pending DMA operation, aborting the DMA if neccessary + * Stop any pending DMA operation, aborting the DMA if necessary */ static void initio_stop_bm(struct initio_host * host) diff --git a/drivers/scsi/libfc/fc_fcp.c b/drivers/scsi/libfc/fc_fcp.c index 96ee599d9a0..96446a85e00 100644 --- a/drivers/scsi/libfc/fc_fcp.c +++ b/drivers/scsi/libfc/fc_fcp.c @@ -48,7 +48,7 @@ struct kmem_cache *scsi_pkt_cachep; #define FC_SRB_CMD_SENT (1 << 0) /* cmd has been sent */ #define FC_SRB_RCV_STATUS (1 << 1) /* response has arrived */ #define FC_SRB_ABORT_PENDING (1 << 2) /* cmd abort sent to device */ -#define FC_SRB_ABORTED (1 << 3) /* abort acknowleged */ +#define FC_SRB_ABORTED (1 << 3) /* abort acknowledged */ #define FC_SRB_DISCONTIG (1 << 4) /* non-sequential data recvd */ #define FC_SRB_COMPL (1 << 5) /* fc_io_compl has been run */ #define FC_SRB_FCP_PROCESSING_TMO (1 << 6) /* timer function processing */ diff --git a/drivers/scsi/lpfc/lpfc_els.c b/drivers/scsi/lpfc/lpfc_els.c index 2cc39684ce9..c898f47f30b 100644 --- a/drivers/scsi/lpfc/lpfc_els.c +++ b/drivers/scsi/lpfc/lpfc_els.c @@ -969,7 +969,7 @@ lpfc_issue_els_flogi(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp, * function returns, it does not guarantee all the IOCBs are actually aborted. * * Return code - * 0 - Sucessfully issued abort iocb on all outstanding flogis (Always 0) + * 0 - Successfully issued abort iocb on all outstanding flogis (Always 0) **/ int lpfc_els_abort_flogi(struct lpfc_hba *phba) @@ -3117,7 +3117,7 @@ lpfc_cmpl_els_rsp(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb, if (ndlp && NLP_CHK_NODE_ACT(ndlp) && (*((uint32_t *) (pcmd)) == ELS_CMD_LS_RJT)) { /* A LS_RJT associated with Default RPI cleanup has its own - * seperate code path. + * separate code path. */ if (!(ndlp->nlp_flag & NLP_RM_DFLT_RPI)) ls_rjt = 1; diff --git a/drivers/scsi/pcmcia/nsp_cs.h b/drivers/scsi/pcmcia/nsp_cs.h index 7db28cd4944..8c61a4fe1db 100644 --- a/drivers/scsi/pcmcia/nsp_cs.h +++ b/drivers/scsi/pcmcia/nsp_cs.h @@ -187,7 +187,7 @@ #define S_IO BIT(1) /* Input/Output line from SCSI bus */ #define S_CD BIT(2) /* Command/Data line from SCSI bus */ #define S_BUSY BIT(3) /* Busy line from SCSI bus */ -#define S_ACK BIT(4) /* Acknowlege line from SCSI bus */ +#define S_ACK BIT(4) /* Acknowledge line from SCSI bus */ #define S_REQUEST BIT(5) /* Request line from SCSI bus */ #define S_SELECT BIT(6) /* */ #define S_ATN BIT(7) /* */ diff --git a/drivers/scsi/pm8001/pm8001_hwi.c b/drivers/scsi/pm8001/pm8001_hwi.c index 9b44c6f1b10..7985ae45d68 100644 --- a/drivers/scsi/pm8001/pm8001_hwi.c +++ b/drivers/scsi/pm8001/pm8001_hwi.c @@ -2924,7 +2924,7 @@ hw_event_sas_phy_up(struct pm8001_hba_info *pm8001_ha, void *piomb) break; default: PM8001_MSG_DBG(pm8001_ha, - pm8001_printk("unkown device type(%x)\n", deviceType)); + pm8001_printk("unknown device type(%x)\n", deviceType)); break; } phy->phy_type |= PORT_TYPE_SAS; diff --git a/drivers/scsi/pm8001/pm8001_sas.c b/drivers/scsi/pm8001/pm8001_sas.c index 7f9c83a7639..3b2c98fba83 100644 --- a/drivers/scsi/pm8001/pm8001_sas.c +++ b/drivers/scsi/pm8001/pm8001_sas.c @@ -600,7 +600,7 @@ static void pm8001_free_dev(struct pm8001_device *pm8001_dev) * by the command "OPC_INB_REG_DEV", after that the HBA will assign a * device ID(according to device's sas address) and returned it to LLDD. From * now on, we communicate with HBA FW with the device ID which HBA assigned - * rather than sas address. it is the neccessary step for our HBA but it is + * rather than sas address. it is the necessary step for our HBA but it is * the optional for other HBA driver. */ static int pm8001_dev_found_notify(struct domain_device *dev) diff --git a/drivers/scsi/pmcraid.h b/drivers/scsi/pmcraid.h index 92f89d50850..b8ad07c3449 100644 --- a/drivers/scsi/pmcraid.h +++ b/drivers/scsi/pmcraid.h @@ -938,7 +938,7 @@ static struct pmcraid_ioasc_error pmcraid_ioasc_error_table[] = { /* * pmcraid_ioctl_header - definition of header structure that preceeds all the - * buffers given as ioctl arguements. + * buffers given as ioctl arguments. * * .signature : always ASCII string, "PMCRAID" * .reserved : not used diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c index 255da53e5a0..5d94772d449 100644 --- a/drivers/scsi/sd.c +++ b/drivers/scsi/sd.c @@ -2105,7 +2105,7 @@ static int sd_revalidate_disk(struct gendisk *disk) * which is followed by sdaaa. * * This is basically 26 base counting with one extra 'nil' entry - * at the beggining from the second digit on and can be + * at the beginning from the second digit on and can be * determined using similar method as 26 base conversion with the * index shifted -1 after each digit is computed. * diff --git a/drivers/spi/spi_s3c24xx.c b/drivers/spi/spi_s3c24xx.c index c010733877a..1fabede9e06 100644 --- a/drivers/spi/spi_s3c24xx.c +++ b/drivers/spi/spi_s3c24xx.c @@ -275,7 +275,7 @@ static inline u32 ack_bit(unsigned int irq) * Claim the FIQ handler (only one can be active at any one time) and * then setup the correct transfer code for this transfer. * - * This call updates all the necessary state information if sucessful, + * This call updates all the necessary state information if successful, * so the caller does not need to do anything more than start the transfer * as normal, since the IRQ will have been re-routed to the FIQ handler. */ diff --git a/drivers/usb/musb/musb_regs.h b/drivers/usb/musb/musb_regs.h index 473a94ef905..7c14d5c5a8a 100644 --- a/drivers/usb/musb/musb_regs.h +++ b/drivers/usb/musb/musb_regs.h @@ -436,7 +436,7 @@ static inline void musb_write_txhubport(void __iomem *mbase, u8 epnum, #define MUSB_FLAT_OFFSET(_epnum, _offset) \ (USB_OFFSET(USB_EP_NI0_TXMAXP) + (0x40 * (_epnum)) + (_offset)) -/* Not implemented - HW has seperate Tx/Rx FIFO */ +/* Not implemented - HW has separate Tx/Rx FIFO */ #define MUSB_TXCSR_MODE 0x0000 static inline void musb_write_txfifosz(void __iomem *mbase, u8 c_size) diff --git a/drivers/usb/serial/cypress_m8.c b/drivers/usb/serial/cypress_m8.c index a591ebec0f8..52a81a312b8 100644 --- a/drivers/usb/serial/cypress_m8.c +++ b/drivers/usb/serial/cypress_m8.c @@ -154,7 +154,7 @@ struct cypress_private { int isthrottled; /* if throttled, discard reads */ wait_queue_head_t delta_msr_wait; /* used for TIOCMIWAIT */ char prev_status, diff_status; /* used for TIOCMIWAIT */ - /* we pass a pointer to this as the arguement sent to + /* we pass a pointer to this as the argument sent to cypress_set_termios old_termios */ struct ktermios tmp_termios; /* stores the old termios settings */ }; diff --git a/drivers/video/omap/lcdc.c b/drivers/video/omap/lcdc.c index a33483910dc..9557f963662 100644 --- a/drivers/video/omap/lcdc.c +++ b/drivers/video/omap/lcdc.c @@ -389,7 +389,7 @@ static int omap_lcdc_enable_plane(int plane, int enable) /* * Configure the LCD DMA for a palette load operation and do the palette * downloading synchronously. We don't use the frame+palette load mode of - * the controller, since the palette can always be downloaded seperately. + * the controller, since the palette can always be downloaded separately. */ static void load_palette(void) { diff --git a/drivers/video/s1d13xxxfb.c b/drivers/video/s1d13xxxfb.c index 0deb0a8867b..7b63429f1a7 100644 --- a/drivers/video/s1d13xxxfb.c +++ b/drivers/video/s1d13xxxfb.c @@ -517,12 +517,12 @@ s1d13xxxfb_bitblt_copyarea(struct fb_info *info, const struct fb_copyarea *area) src = (sy * stride) + (bpp * sx); } - /* set source adress */ + /* set source address */ s1d13xxxfb_writereg(info->par, S1DREG_BBLT_SRC_START0, (src & 0xff)); s1d13xxxfb_writereg(info->par, S1DREG_BBLT_SRC_START1, (src >> 8) & 0x00ff); s1d13xxxfb_writereg(info->par, S1DREG_BBLT_SRC_START2, (src >> 16) & 0x00ff); - /* set destination adress */ + /* set destination address */ s1d13xxxfb_writereg(info->par, S1DREG_BBLT_DST_START0, (dst & 0xff)); s1d13xxxfb_writereg(info->par, S1DREG_BBLT_DST_START1, (dst >> 8) & 0x00ff); s1d13xxxfb_writereg(info->par, S1DREG_BBLT_DST_START2, (dst >> 16) & 0x00ff); diff --git a/drivers/video/sm501fb.c b/drivers/video/sm501fb.c index 35370d0ecf0..b7dc1800efa 100644 --- a/drivers/video/sm501fb.c +++ b/drivers/video/sm501fb.c @@ -411,7 +411,7 @@ static int sm501fb_set_par_common(struct fb_info *info, struct sm501fb_par *par = info->par; struct sm501fb_info *fbi = par->info; unsigned long pixclock; /* pixelclock in Hz */ - unsigned long sm501pixclock; /* pixelclock the 501 can achive in Hz */ + unsigned long sm501pixclock; /* pixelclock the 501 can achieve in Hz */ unsigned int mem_type; unsigned int clock_type; unsigned int head_addr; diff --git a/fs/affs/bitmap.c b/fs/affs/bitmap.c index dc5ef14bdc1..8306d53307e 100644 --- a/fs/affs/bitmap.c +++ b/fs/affs/bitmap.c @@ -128,7 +128,7 @@ err_range: /* * Allocate a block in the given allocation zone. * Since we have to byte-swap the bitmap on little-endian - * machines, this is rather expensive. Therefor we will + * machines, this is rather expensive. Therefore we will * preallocate up to 16 blocks from the same word, if * possible. We are not doing preallocations in the * header zone, though. diff --git a/fs/binfmt_elf_fdpic.c b/fs/binfmt_elf_fdpic.c index 18d77297ccc..364fcfc0c5d 100644 --- a/fs/binfmt_elf_fdpic.c +++ b/fs/binfmt_elf_fdpic.c @@ -1393,7 +1393,7 @@ static inline void fill_note(struct memelfnote *note, const char *name, int type /* * fill up all the fields in prstatus from the given task struct, except - * registers which need to be filled up seperately. + * registers which need to be filled up separately. */ static void fill_prstatus(struct elf_prstatus *prstatus, struct task_struct *p, long signr) diff --git a/fs/cifs/cifs_dfs_ref.c b/fs/cifs/cifs_dfs_ref.c index b44ce0a0711..b1d61d0bdfc 100644 --- a/fs/cifs/cifs_dfs_ref.c +++ b/fs/cifs/cifs_dfs_ref.c @@ -54,7 +54,7 @@ void cifs_dfs_release_automount_timer(void) * Extracts sharename form full UNC. * i.e. strips from UNC trailing path that is not part of share * name and fixup missing '\' in the begining of DFS node refferal - * if neccessary. + * if necessary. * Returns pointer to share name on success or ERR_PTR on error. * Caller is responsible for freeing returned string. */ diff --git a/fs/cifs/cifssmb.c b/fs/cifs/cifssmb.c index 941441d3e38..0e22440d2f0 100644 --- a/fs/cifs/cifssmb.c +++ b/fs/cifs/cifssmb.c @@ -3886,7 +3886,7 @@ parse_DFS_referrals(TRANSACTION2_GET_DFS_REFER_RSP *pSMBr, goto parse_DFS_referrals_exit; } - /* collect neccessary data from referrals */ + /* collect necessary data from referrals */ for (i = 0; i < *num_of_nodes; i++) { char *temp; int max_len; diff --git a/fs/ext4/move_extent.c b/fs/ext4/move_extent.c index 82c415be87a..12a9ec73a88 100644 --- a/fs/ext4/move_extent.c +++ b/fs/ext4/move_extent.c @@ -928,7 +928,7 @@ out2: } /** - * mext_check_argumants - Check whether move extent can be done + * mext_check_arguments - Check whether move extent can be done * * @orig_inode: original inode * @donor_inode: donor inode diff --git a/fs/fuse/inode.c b/fs/fuse/inode.c index 1a822ce2b24..ec14d19ce50 100644 --- a/fs/fuse/inode.c +++ b/fs/fuse/inode.c @@ -850,7 +850,7 @@ static void fuse_send_init(struct fuse_conn *fc, struct fuse_req *req) req->in.args[0].size = sizeof(*arg); req->in.args[0].value = arg; req->out.numargs = 1; - /* Variable length arguement used for backward compatibility + /* Variable length argument used for backward compatibility with interface version < 7.5. Rest of init_out is zeroed by do_get_request(), so a short reply is not a problem */ req->out.argvar = 1; diff --git a/fs/gfs2/ops_fstype.c b/fs/gfs2/ops_fstype.c index edfee24f363..0556f7feded 100644 --- a/fs/gfs2/ops_fstype.c +++ b/fs/gfs2/ops_fstype.c @@ -992,7 +992,7 @@ static const struct lm_lockops nolock_ops = { /** * gfs2_lm_mount - mount a locking protocol * @sdp: the filesystem - * @args: mount arguements + * @args: mount arguments * @silent: if 1, don't complain if the FS isn't a GFS2 fs * * Returns: errno diff --git a/fs/jbd/transaction.c b/fs/jbd/transaction.c index 006f9ad838a..57ae203c8ab 100644 --- a/fs/jbd/transaction.c +++ b/fs/jbd/transaction.c @@ -1398,7 +1398,7 @@ int journal_stop(handle_t *handle) * the case where our storage is so fast that it is more optimal to go * ahead and force a flush and wait for the transaction to be committed * than it is to wait for an arbitrary amount of time for new writers to - * join the transaction. We acheive this by measuring how long it takes + * join the transaction. We achieve this by measuring how long it takes * to commit a transaction, and compare it with how long this * transaction has been running, and if run time < commit time then we * sleep for the delta and commit. This greatly helps super fast disks diff --git a/fs/nfsd/nfs4xdr.c b/fs/nfsd/nfs4xdr.c index a8587e90fd5..143d43a93b7 100644 --- a/fs/nfsd/nfs4xdr.c +++ b/fs/nfsd/nfs4xdr.c @@ -1528,7 +1528,7 @@ static void write_cinfo(__be32 **p, struct nfsd4_change_info *c) } } while (0); /* Encode as an array of strings the string given with components - * seperated @sep. + * separated @sep. */ static __be32 nfsd4_encode_components(char sep, char *components, __be32 **pp, int *buflen) diff --git a/fs/ocfs2/dlmglue.c b/fs/ocfs2/dlmglue.c index c5e4a49e3a1..ccb9c44f478 100644 --- a/fs/ocfs2/dlmglue.c +++ b/fs/ocfs2/dlmglue.c @@ -1757,7 +1757,7 @@ out: * ocfs2_file_lock() and ocfs2_file_unlock() map to a single pair of * flock() calls. The locking approach this requires is sufficiently * different from all other cluster lock types that we implement a - * seperate path to the "low-level" dlm calls. In particular: + * separate path to the "low-level" dlm calls. In particular: * * - No optimization of lock levels is done - we take at exactly * what's been requested. diff --git a/fs/ocfs2/extent_map.c b/fs/ocfs2/extent_map.c index d35a27f4523..83e9b1249ae 100644 --- a/fs/ocfs2/extent_map.c +++ b/fs/ocfs2/extent_map.c @@ -453,7 +453,7 @@ static int ocfs2_get_clusters_nocache(struct inode *inode, if (i == -1) { /* * Holes can be larger than the maximum size of an - * extent, so we return their lengths in a seperate + * extent, so we return their lengths in a separate * field. */ if (hole_len) { diff --git a/fs/reiserfs/bitmap.c b/fs/reiserfs/bitmap.c index 65c87276117..ecc04b5ede5 100644 --- a/fs/reiserfs/bitmap.c +++ b/fs/reiserfs/bitmap.c @@ -169,7 +169,7 @@ static int scan_bitmap_block(struct reiserfs_transaction_handle *th, return 0; // No free blocks in this bitmap } - /* search for a first zero bit -- beggining of a window */ + /* search for a first zero bit -- beginning of a window */ *beg = reiserfs_find_next_zero_le_bit ((unsigned long *)(bh->b_data), boundary, *beg); diff --git a/include/linux/hil.h b/include/linux/hil.h index 13352d7d0ca..523785a9de7 100644 --- a/include/linux/hil.h +++ b/include/linux/hil.h @@ -168,14 +168,14 @@ enum hil_command { HIL_CMD_PR6 = 0x45, /* Prompt6 */ HIL_CMD_PR7 = 0x46, /* Prompt7 */ HIL_CMD_PRM = 0x47, /* Prompt (General Purpose) */ - HIL_CMD_AK1 = 0x48, /* Acknowlege1 */ - HIL_CMD_AK2 = 0x49, /* Acknowlege2 */ - HIL_CMD_AK3 = 0x4a, /* Acknowlege3 */ - HIL_CMD_AK4 = 0x4b, /* Acknowlege4 */ - HIL_CMD_AK5 = 0x4c, /* Acknowlege5 */ - HIL_CMD_AK6 = 0x4d, /* Acknowlege6 */ - HIL_CMD_AK7 = 0x4e, /* Acknowlege7 */ - HIL_CMD_ACK = 0x4f, /* Acknowlege (General Purpose) */ + HIL_CMD_AK1 = 0x48, /* Acknowledge1 */ + HIL_CMD_AK2 = 0x49, /* Acknowledge2 */ + HIL_CMD_AK3 = 0x4a, /* Acknowledge3 */ + HIL_CMD_AK4 = 0x4b, /* Acknowledge4 */ + HIL_CMD_AK5 = 0x4c, /* Acknowledge5 */ + HIL_CMD_AK6 = 0x4d, /* Acknowledge6 */ + HIL_CMD_AK7 = 0x4e, /* Acknowledge7 */ + HIL_CMD_ACK = 0x4f, /* Acknowledge (General Purpose) */ /* 0x50 to 0x78 reserved for future use */ /* 0x80 to 0xEF device-specific commands */ diff --git a/include/linux/lru_cache.h b/include/linux/lru_cache.h index 3a2b2d9b047..de48d167568 100644 --- a/include/linux/lru_cache.h +++ b/include/linux/lru_cache.h @@ -64,7 +64,7 @@ For crash recovery after replication node failure, usually the condition is softened to regions that _may_ have been target of in-flight WRITE IO, e.g. by only lazily clearing the on-disk write-intent bitmap, trading frequency of meta data transactions against amount of - (possibly unneccessary) resync traffic. + (possibly unnecessary) resync traffic. If we set a hard limit on the area that may be "hot" at any given time, we limit the amount of resync traffic needed for crash recovery. diff --git a/include/linux/sched.h b/include/linux/sched.h index abdfacc5865..a70957b138e 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -1533,7 +1533,7 @@ struct task_struct { struct list_head *scm_work_list; #ifdef CONFIG_FUNCTION_GRAPH_TRACER - /* Index of current stored adress in ret_stack */ + /* Index of current stored address in ret_stack */ int curr_ret_stack; /* Stack of return addresses for return function tracing */ struct ftrace_ret_stack *ret_stack; diff --git a/include/media/davinci/vpfe_capture.h b/include/media/davinci/vpfe_capture.h index d863e5e8426..4314a5f6a08 100644 --- a/include/media/davinci/vpfe_capture.h +++ b/include/media/davinci/vpfe_capture.h @@ -165,7 +165,7 @@ struct vpfe_device { u8 started; /* * offset where second field starts from the starting of the - * buffer for field seperated YCbCr formats + * buffer for field separated YCbCr formats */ u32 field_off; }; diff --git a/net/ipv4/tcp_timer.c b/net/ipv4/tcp_timer.c index 8816a20c259..aff48d65718 100644 --- a/net/ipv4/tcp_timer.c +++ b/net/ipv4/tcp_timer.c @@ -133,7 +133,7 @@ static void tcp_mtu_probing(struct inet_connection_sock *icsk, struct sock *sk) } /* This function calculates a "timeout" which is equivalent to the timeout of a - * TCP connection after "boundary" unsucessful, exponentially backed-off + * TCP connection after "boundary" unsuccessful, exponentially backed-off * retransmissions with an initial RTO of TCP_RTO_MIN. */ static bool retransmits_timed_out(struct sock *sk, diff --git a/net/mac80211/mesh_plink.c b/net/mac80211/mesh_plink.c index 0f7c6e6a424..54e4c8bb23e 100644 --- a/net/mac80211/mesh_plink.c +++ b/net/mac80211/mesh_plink.c @@ -743,7 +743,7 @@ void mesh_rx_plink_frame(struct ieee80211_sub_if_data *sdata, struct ieee80211_m break; default: /* should not get here, PLINK_BLOCKED is dealt with at the - * beggining of the function + * beginning of the function */ spin_unlock_bh(&sta->lock); break; diff --git a/net/netfilter/nf_conntrack_sip.c b/net/netfilter/nf_conntrack_sip.c index 023966b569b..fbe94adee7a 100644 --- a/net/netfilter/nf_conntrack_sip.c +++ b/net/netfilter/nf_conntrack_sip.c @@ -276,7 +276,7 @@ EXPORT_SYMBOL_GPL(ct_sip_parse_request); * tabs, spaces and continuation lines, which are treated as a single whitespace * character. * - * Some headers may appear multiple times. A comma seperated list of values is + * Some headers may appear multiple times. A comma separated list of values is * equivalent to multiple headers. */ static const struct sip_header ct_sip_hdrs[] = { @@ -412,7 +412,7 @@ int ct_sip_get_header(const struct nf_conn *ct, const char *dptr, } EXPORT_SYMBOL_GPL(ct_sip_get_header); -/* Get next header field in a list of comma seperated values */ +/* Get next header field in a list of comma separated values */ static int ct_sip_next_header(const struct nf_conn *ct, const char *dptr, unsigned int dataoff, unsigned int datalen, enum sip_header_types type, diff --git a/net/netfilter/xt_hashlimit.c b/net/netfilter/xt_hashlimit.c index dd16e404424..cbaac92dad5 100644 --- a/net/netfilter/xt_hashlimit.c +++ b/net/netfilter/xt_hashlimit.c @@ -1,6 +1,6 @@ /* * xt_hashlimit - Netfilter module to limit the number of packets per time - * seperately for each hashbucket (sourceip/sourceport/dstip/dstport) + * separately for each hashbucket (sourceip/sourceport/dstip/dstport) * * (C) 2003-2004 by Harald Welte * Copyright © CC Computer Consultants GmbH, 2007 - 2008 diff --git a/net/sctp/sm_sideeffect.c b/net/sctp/sm_sideeffect.c index 4e4ca65cd32..500886bda9b 100644 --- a/net/sctp/sm_sideeffect.c +++ b/net/sctp/sm_sideeffect.c @@ -475,7 +475,7 @@ static void sctp_do_8_2_transport_strike(struct sctp_association *asoc, * used to provide an upper bound to this doubling operation. * * Special Case: the first HB doesn't trigger exponential backoff. - * The first unacknowleged HB triggers it. We do this with a flag + * The first unacknowledged HB triggers it. We do this with a flag * that indicates that we have an outstanding HB. */ if (!is_hb || transport->hb_sent) { diff --git a/scripts/gfp-translate b/scripts/gfp-translate index 073cb6d152a..d81b968d864 100644 --- a/scripts/gfp-translate +++ b/scripts/gfp-translate @@ -19,7 +19,7 @@ usage() { exit 0 } -# Parse command-line arguements +# Parse command-line arguments while [ $# -gt 0 ]; do case $1 in --source) diff --git a/sound/pci/rme9652/hdspm.c b/sound/pci/rme9652/hdspm.c index a1b10d1a384..db0ed1cbd98 100644 --- a/sound/pci/rme9652/hdspm.c +++ b/sound/pci/rme9652/hdspm.c @@ -2479,7 +2479,7 @@ static int snd_hdspm_put_qs_wire(struct snd_kcontrol *kcontrol, on MADICARD - playback mixer matrix: [channelout+64] [output] [value] - input(thru) mixer matrix: [channelin] [output] [value] - (better do 2 kontrols for seperation ?) + (better do 2 kontrols for separation ?) */ #define HDSPM_MIXER(xname, xindex) \ diff --git a/sound/soc/codecs/wm8990.c b/sound/soc/codecs/wm8990.c index 341481e0e83..427614a2762 100644 --- a/sound/soc/codecs/wm8990.c +++ b/sound/soc/codecs/wm8990.c @@ -990,7 +990,7 @@ static int wm8990_set_dai_pll(struct snd_soc_dai *codec_dai, int pll_id, reg = snd_soc_read(codec, WM8990_CLOCKING_2); snd_soc_write(codec, WM8990_CLOCKING_2, reg | WM8990_SYSCLK_SRC); - /* set up N , fractional mode and pre-divisor if neccessary */ + /* set up N , fractional mode and pre-divisor if necessary */ snd_soc_write(codec, WM8990_PLL1, pll_div.n | WM8990_SDM | (pll_div.div2?WM8990_PRESCALE:0)); snd_soc_write(codec, WM8990_PLL2, (u8)(pll_div.k>>8)); diff --git a/tools/perf/util/hist.c b/tools/perf/util/hist.c index e8daf5ca6fd..44408c2621c 100644 --- a/tools/perf/util/hist.c +++ b/tools/perf/util/hist.c @@ -321,7 +321,7 @@ static size_t __callchain__fprintf_graph(FILE *fp, struct callchain_node *self, new_depth_mask &= ~(1 << (depth - 1)); /* - * But we keep the older depth mask for the line seperator + * But we keep the older depth mask for the line separator * to keep the level link until we reach the last child */ ret += ipchain__fprintf_graph_line(fp, depth, depth_mask, -- cgit v1.2.3-70-g09d2 From 586f64c749a71fa2c86e1e2c121d22c8bc60669a Mon Sep 17 00:00:00 2001 From: Jiri Kosina Date: Mon, 22 Feb 2010 11:10:48 +0100 Subject: Fix of spelling in arch/sparc/kernel/leon_kernel.c no longer needed This is a partial revert of commit 3ad2f3fbb961 ("tree-wide: Assorted spelling fixes") as the change in arch/sparc/kernel/leon_kernel.c has been already fixed while refactoring the file in the sparc tree. Reported-by: Stephen Rothwell Signed-off-by: Jiri Kosina --- arch/sparc/kernel/leon_kernel.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/sparc/kernel/leon_kernel.c b/arch/sparc/kernel/leon_kernel.c index 554e0b80bcd..87f1760c0aa 100644 --- a/arch/sparc/kernel/leon_kernel.c +++ b/arch/sparc/kernel/leon_kernel.c @@ -124,7 +124,7 @@ void __init leon_init_timers(irq_handler_t counter_fn) if (!(LEON3_BYPASS_LOAD_PA(&leon3_gptimer_regs->config) & (1<