From b6392bd5b11d694a5d563d2ad1d88137d2cde036 Mon Sep 17 00:00:00 2001 From: Janusz Krzysztofik Date: Mon, 30 Apr 2012 19:26:09 +0200 Subject: ARM: OMAP1: Amstrad Delta: Fix wrong IRQ base in FIQ handler Commit 384ebe1c2849160d040df3e68634ec506f13d9ff, "gpio/omap: Add DT support to GPIO driver", introduced dynamic IRQ numbering of OMAP GPIO interrupts, breaking all IH_GPIO_BASE based IRQ number calculations. This issue was corrected in the OMAP GPIO driver and the related header file with commit 25db711df3258d125dc1209800317e5c0ef3c870, "gpio/omap: Fix IRQ handling for SPARSE_IRQ". However, the Amstrad Delta FIQ handler, which replaces the gpio-omap driver in serving GPIO interrupts on this board, still uses that outdated method. Fix it. Signed-off-by: Janusz Krzysztofik Signed-off-by: Tony Lindgren --- arch/arm/mach-omap1/ams-delta-fiq.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-omap1/ams-delta-fiq.c b/arch/arm/mach-omap1/ams-delta-fiq.c index fcce7ff3763..cfd98b186fc 100644 --- a/arch/arm/mach-omap1/ams-delta-fiq.c +++ b/arch/arm/mach-omap1/ams-delta-fiq.c @@ -48,7 +48,7 @@ static irqreturn_t deferred_fiq(int irq, void *dev_id) struct irq_chip *irq_chip = NULL; int gpio, irq_num, fiq_count; - irq_desc = irq_to_desc(IH_GPIO_BASE); + irq_desc = irq_to_desc(gpio_to_irq(AMS_DELTA_GPIO_PIN_KEYBRD_CLK)); if (irq_desc) irq_chip = irq_desc->irq_data.chip; -- cgit v1.2.3-70-g09d2 From 08ca7444f589bedf9ad5d82883e5d0754852d73b Mon Sep 17 00:00:00 2001 From: Archit Taneja Date: Thu, 19 Apr 2012 17:39:16 +0530 Subject: ARM: OMAP: Revert "ARM: OMAP: ctrl: Fix CONTROL_DSIPHY register fields" This reverts commit 46f8c3c7e95c0d30d95911e7975ddc4f93b3e237. The commit above swapped the DSI1_PPID and DSI2_PPID register fields in CONTROL_DSIPHY to be in sync with the newer public OMAP TRMs(after version V). With this commit, contention errors were reported on DSI lanes some OMAP4 SDPs. After probing the DSI lanes on OMAP4 SDP, it was seen that setting bits in the DSI2_PPID field was pulling up voltage on DSI1 lanes, and DSI1_PPID field was pulling up voltage on DSI2 lanes. This proves that the current version of OMAP4 TRM is incorrect, swap the position of register fields according to the older TRM versions as they were correct. Cc: stable@vger.kernel.org # v3.2+ Acked-by: Tomi Valkeinen Signed-off-by: Archit Taneja Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/include/mach/ctrl_module_pad_core_44xx.h | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/include/mach/ctrl_module_pad_core_44xx.h b/arch/arm/mach-omap2/include/mach/ctrl_module_pad_core_44xx.h index 1e2d3322f33..c88420de115 100644 --- a/arch/arm/mach-omap2/include/mach/ctrl_module_pad_core_44xx.h +++ b/arch/arm/mach-omap2/include/mach/ctrl_module_pad_core_44xx.h @@ -941,10 +941,10 @@ #define OMAP4_DSI2_LANEENABLE_MASK (0x7 << 29) #define OMAP4_DSI1_LANEENABLE_SHIFT 24 #define OMAP4_DSI1_LANEENABLE_MASK (0x1f << 24) -#define OMAP4_DSI2_PIPD_SHIFT 19 -#define OMAP4_DSI2_PIPD_MASK (0x1f << 19) -#define OMAP4_DSI1_PIPD_SHIFT 14 -#define OMAP4_DSI1_PIPD_MASK (0x1f << 14) +#define OMAP4_DSI1_PIPD_SHIFT 19 +#define OMAP4_DSI1_PIPD_MASK (0x1f << 19) +#define OMAP4_DSI2_PIPD_SHIFT 14 +#define OMAP4_DSI2_PIPD_MASK (0x1f << 14) /* CONTROL_MCBSPLP */ #define OMAP4_ALBCTRLRX_FSX_SHIFT 31 -- cgit v1.2.3-70-g09d2 From e787ec1376e862fcea1bfd523feb7c5fb43ecdb9 Mon Sep 17 00:00:00 2001 From: Tim Bird Date: Wed, 2 May 2012 22:55:39 +0100 Subject: ARM: 7410/1: Add extra clobber registers for assembly in kernel_execve The inline assembly in kernel_execve() uses r8 and r9. Since this code sequence does not return, it usually doesn't matter if the register clobber list is accurate. However, I saw a case where a particular version of gcc used r8 as an intermediate for the value eventually passed to r9. Because r8 is used in the inline assembly, and not mentioned in the clobber list, r9 was set to an incorrect value. This resulted in a kernel panic on execution of the first user-space program in the system. r9 is used in ret_to_user as the thread_info pointer, and if it's wrong, bad things happen. Cc: Signed-off-by: Tim Bird Signed-off-by: Russell King --- arch/arm/kernel/sys_arm.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/kernel/sys_arm.c b/arch/arm/kernel/sys_arm.c index d2b177905cd..76cbb055dd0 100644 --- a/arch/arm/kernel/sys_arm.c +++ b/arch/arm/kernel/sys_arm.c @@ -115,7 +115,7 @@ int kernel_execve(const char *filename, "Ir" (THREAD_START_SP - sizeof(regs)), "r" (®s), "Ir" (sizeof(regs)) - : "r0", "r1", "r2", "r3", "ip", "lr", "memory"); + : "r0", "r1", "r2", "r3", "r8", "r9", "ip", "lr", "memory"); out: return ret; -- cgit v1.2.3-70-g09d2 From 6a68b6f574c8ad2c1d90f0db8fd95b8abe8a0a73 Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Fri, 4 May 2012 17:52:02 +0100 Subject: ARM: 7411/1: audit: fix treatment of saved ip register during syscall tracing The ARM audit code incorrectly uses the saved application ip register value to infer syscall entry or exit. Additionally, the saved value will be clobbered if the current task is not being traced, which can lead to libc corruption if ip is live (apparently glibc uses it for the TLS pointer). This patch fixes the syscall tracing code so that the why parameter is used to infer the syscall direction and the saved ip is only updated if we know that we will be signalling a ptrace trap. Reported-and-Tested-by: Jon Masters Cc: stable@vger.kernel.org Cc: Eric Paris Signed-off-by: Will Deacon Signed-off-by: Russell King --- arch/arm/kernel/ptrace.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) (limited to 'arch') diff --git a/arch/arm/kernel/ptrace.c b/arch/arm/kernel/ptrace.c index 80abafb9bf3..d8dbe9ca66b 100644 --- a/arch/arm/kernel/ptrace.c +++ b/arch/arm/kernel/ptrace.c @@ -916,14 +916,7 @@ asmlinkage int syscall_trace(int why, struct pt_regs *regs, int scno) { unsigned long ip; - /* - * Save IP. IP is used to denote syscall entry/exit: - * IP = 0 -> entry, = 1 -> exit - */ - ip = regs->ARM_ip; - regs->ARM_ip = why; - - if (!ip) + if (why) audit_syscall_exit(regs); else audit_syscall_entry(AUDIT_ARCH_NR, scno, regs->ARM_r0, @@ -936,6 +929,13 @@ asmlinkage int syscall_trace(int why, struct pt_regs *regs, int scno) current_thread_info()->syscall = scno; + /* + * IP is used to denote syscall entry/exit: + * IP = 0 -> entry, =1 -> exit + */ + ip = regs->ARM_ip; + regs->ARM_ip = why; + /* the 0x80 provides a way for the tracing parent to distinguish between a syscall stop and SIGTRAP delivery */ ptrace_notify(SIGTRAP | ((current->ptrace & PT_TRACESYSGOOD) -- cgit v1.2.3-70-g09d2 From 2f978366984a418f38fcf44137be1fbc5a89cfd9 Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Fri, 4 May 2012 17:53:52 +0100 Subject: ARM: 7412/1: audit: use only AUDIT_ARCH_ARM regardless of endianness The machine endianness has no direct correspondence to the syscall ABI, so use only AUDIT_ARCH_ARM when identifying the ABI to the audit tools in userspace. Cc: stable@vger.kernel.org Signed-off-by: Will Deacon Signed-off-by: Russell King --- arch/arm/kernel/ptrace.c | 8 +------- 1 file changed, 1 insertion(+), 7 deletions(-) (limited to 'arch') diff --git a/arch/arm/kernel/ptrace.c b/arch/arm/kernel/ptrace.c index d8dbe9ca66b..9650c143afc 100644 --- a/arch/arm/kernel/ptrace.c +++ b/arch/arm/kernel/ptrace.c @@ -906,12 +906,6 @@ long arch_ptrace(struct task_struct *child, long request, return ret; } -#ifdef __ARMEB__ -#define AUDIT_ARCH_NR AUDIT_ARCH_ARMEB -#else -#define AUDIT_ARCH_NR AUDIT_ARCH_ARM -#endif - asmlinkage int syscall_trace(int why, struct pt_regs *regs, int scno) { unsigned long ip; @@ -919,7 +913,7 @@ asmlinkage int syscall_trace(int why, struct pt_regs *regs, int scno) if (why) audit_syscall_exit(regs); else - audit_syscall_entry(AUDIT_ARCH_NR, scno, regs->ARM_r0, + audit_syscall_entry(AUDIT_ARCH_ARM, scno, regs->ARM_r0, regs->ARM_r1, regs->ARM_r2, regs->ARM_r3); if (!test_thread_flag(TIF_SYSCALL_TRACE)) -- cgit v1.2.3-70-g09d2 From fde165b2a29673aabf18ceff14dea1f1cfb0daad Mon Sep 17 00:00:00 2001 From: Colin Cross Date: Sat, 5 May 2012 20:58:13 +0100 Subject: ARM: 7414/1: SMP: prevent use of the console when using idmap_pgd Commit 4e8ee7de227e3ab9a72040b448ad728c5428a042 (ARM: SMP: use idmap_pgd for mapping MMU enable during secondary booting) switched secondary boot to use idmap_pgd, which is initialized during early_initcall, instead of a page table initialized during __cpu_up. This causes idmap_pgd to contain the static mappings but be missing all dynamic mappings. If a console is registered that creates a dynamic mapping, the printk in secondary_start_kernel will trigger a data abort on the missing mapping before the exception handlers have been initialized, leading to a hang. Initial boot is not affected because no consoles have been registered, and resume is usually not affected because the offending console is suspended. Onlining a cpu with hotplug triggers the problem. A workaround is to the printk in secondary_start_kernel until after the page tables have been switched back to init_mm. Cc: Signed-off-by: Colin Cross Signed-off-by: Russell King --- arch/arm/kernel/smp.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c index f6a4d32b042..8f464465977 100644 --- a/arch/arm/kernel/smp.c +++ b/arch/arm/kernel/smp.c @@ -251,8 +251,6 @@ asmlinkage void __cpuinit secondary_start_kernel(void) struct mm_struct *mm = &init_mm; unsigned int cpu = smp_processor_id(); - printk("CPU%u: Booted secondary processor\n", cpu); - /* * All kernel threads share the same mm context; grab a * reference and switch to it. @@ -264,6 +262,8 @@ asmlinkage void __cpuinit secondary_start_kernel(void) enter_lazy_tlb(mm, current); local_flush_tlb_all(); + printk("CPU%u: Booted secondary processor\n", cpu); + cpu_init(); preempt_disable(); trace_hardirqs_off(); -- cgit v1.2.3-70-g09d2 From a4fa16353108431e7cfdfc3ecf683bac21b50755 Mon Sep 17 00:00:00 2001 From: Gleb Natapov Date: Thu, 3 May 2012 11:36:39 +0300 Subject: KVM: ensure async PF event wakes up vcpu from halt If vcpu executes hlt instruction while async PF is waiting to be delivered vcpu can block and deliver async PF only after another even wakes it up. This happens because kvm_check_async_pf_completion() will remove completion event from vcpu->async_pf.done before entering kvm_vcpu_block() and this will make kvm_arch_vcpu_runnable() return false. The solution is to make vcpu runnable when processing completion. Signed-off-by: Gleb Natapov Signed-off-by: Avi Kivity --- arch/x86/kvm/x86.c | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c index 91a5e989abc..185a2b823a2 100644 --- a/arch/x86/kvm/x86.c +++ b/arch/x86/kvm/x86.c @@ -6581,6 +6581,7 @@ void kvm_arch_async_page_present(struct kvm_vcpu *vcpu, kvm_inject_page_fault(vcpu, &fault); } vcpu->arch.apf.halted = false; + vcpu->arch.mp_state = KVM_MP_STATE_RUNNABLE; } bool kvm_arch_can_inject_async_page_present(struct kvm_vcpu *vcpu) -- cgit v1.2.3-70-g09d2 From 62c49cc976af84cb0ffcb5ec07ee88da1a94e222 Mon Sep 17 00:00:00 2001 From: Gleb Natapov Date: Wed, 2 May 2012 15:04:02 +0300 Subject: KVM: Do not take reference to mm during async #PF It turned to be totally unneeded. The reason the code was introduced is so that KVM can prefault swapped in page, but prefault can fail even if mm is pinned since page table can change anyway. KVM handles this situation correctly though and does not inject spurious page faults. Fixes: "INFO: SOFTIRQ-safe -> SOFTIRQ-unsafe lock order detected" warning while running LTP inside a KVM guest using the recent -next kernel. Reported-by: Sasha Levin Signed-off-by: Gleb Natapov Signed-off-by: Avi Kivity --- arch/x86/kernel/kvm.c | 9 +-------- 1 file changed, 1 insertion(+), 8 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/kvm.c b/arch/x86/kernel/kvm.c index b8ba6e4a27e..e554e5ad2fe 100644 --- a/arch/x86/kernel/kvm.c +++ b/arch/x86/kernel/kvm.c @@ -79,7 +79,6 @@ struct kvm_task_sleep_node { u32 token; int cpu; bool halted; - struct mm_struct *mm; }; static struct kvm_task_sleep_head { @@ -126,9 +125,7 @@ void kvm_async_pf_task_wait(u32 token) n.token = token; n.cpu = smp_processor_id(); - n.mm = current->active_mm; n.halted = idle || preempt_count() > 1; - atomic_inc(&n.mm->mm_count); init_waitqueue_head(&n.wq); hlist_add_head(&n.link, &b->list); spin_unlock(&b->lock); @@ -161,9 +158,6 @@ EXPORT_SYMBOL_GPL(kvm_async_pf_task_wait); static void apf_task_wake_one(struct kvm_task_sleep_node *n) { hlist_del_init(&n->link); - if (!n->mm) - return; - mmdrop(n->mm); if (n->halted) smp_send_reschedule(n->cpu); else if (waitqueue_active(&n->wq)) @@ -207,7 +201,7 @@ again: * async PF was not yet handled. * Add dummy entry for the token. */ - n = kmalloc(sizeof(*n), GFP_ATOMIC); + n = kzalloc(sizeof(*n), GFP_ATOMIC); if (!n) { /* * Allocation failed! Busy wait while other cpu @@ -219,7 +213,6 @@ again: } n->token = token; n->cpu = smp_processor_id(); - n->mm = NULL; init_waitqueue_head(&n->wq); hlist_add_head(&n->link, &b->list); } else -- cgit v1.2.3-70-g09d2 From febb72a6e4cc6c8cffcc1ea649a3fb364f1ea432 Mon Sep 17 00:00:00 2001 From: Larry Finger Date: Sun, 6 May 2012 19:40:03 -0500 Subject: IA32 emulation: Fix build problem for modular ia32 a.out support Commit ce7e5d2d19bc ("x86: fix broken TASK_SIZE for ia32_aout") breaks kernel builds when "CONFIG_IA32_AOUT=m" with ERROR: "set_personality_ia32" [arch/x86/ia32/ia32_aout.ko] undefined! make[1]: *** [__modpost] Error 1 The entry point needs to be exported. Signed-off-by: Larry Finger Acked-by: Al Viro Signed-off-by: Linus Torvalds --- arch/x86/kernel/process_64.c | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/x86/kernel/process_64.c b/arch/x86/kernel/process_64.c index 733ca39f367..43d8b48b23e 100644 --- a/arch/x86/kernel/process_64.c +++ b/arch/x86/kernel/process_64.c @@ -423,6 +423,7 @@ void set_personality_ia32(bool x32) current_thread_info()->status |= TS_COMPAT; } } +EXPORT_SYMBOL_GPL(set_personality_ia32); unsigned long get_wchan(struct task_struct *p) { -- cgit v1.2.3-70-g09d2 From 558daa289a402dbcce0c065c6ff3cc2e00ffeac8 Mon Sep 17 00:00:00 2001 From: Konrad Rzeszutek Wilk Date: Wed, 2 May 2012 15:04:51 -0400 Subject: xen/apic: Return the APIC ID (and version) for CPU 0. On x86_64 on AMD machines where the first APIC_ID is not zero, we get: ACPI: LAPIC (acpi_id[0x01] lapic_id[0x10] enabled) BIOS bug: APIC version is 0 for CPU 1/0x10, fixing up to 0x10 BIOS bug: APIC version mismatch, boot CPU: 0, CPU 1: version 10 which means that when the ACPI processor driver loads and tries to parse the _Pxx states it fails to do as, as it ends up calling acpi_get_cpuid which does this: for_each_possible_cpu(i) { if (cpu_physical_id(i) == apic_id) return i; } And the bootup CPU, has not been found so it fails and returns -1 for the first CPU - which then subsequently in the loop that "acpi_processor_get_info" does results in returning an error, which means that "acpi_processor_add" failing and per_cpu(processor) is never set (and is NULL). That means that when xen-acpi-processor tries to load (much much later on) and parse the P-states it gets -ENODEV from acpi_processor_register_performance() (which tries to read the per_cpu(processor)) and fails to parse the data. Reported-by-and-Tested-by: Stefan Bader Suggested-by: Boris Ostrovsky [v2: Bit-shift APIC ID by 24 bits] Signed-off-by: Konrad Rzeszutek Wilk --- arch/x86/xen/enlighten.c | 35 ++++++++++++++++++++++++++++++++++- 1 file changed, 34 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c index a8f8844b8d3..4f437dedbdf 100644 --- a/arch/x86/xen/enlighten.c +++ b/arch/x86/xen/enlighten.c @@ -809,9 +809,40 @@ static void xen_io_delay(void) } #ifdef CONFIG_X86_LOCAL_APIC +static unsigned long xen_set_apic_id(unsigned int x) +{ + WARN_ON(1); + return x; +} +static unsigned int xen_get_apic_id(unsigned long x) +{ + return ((x)>>24) & 0xFFu; +} static u32 xen_apic_read(u32 reg) { - return 0; + struct xen_platform_op op = { + .cmd = XENPF_get_cpuinfo, + .interface_version = XENPF_INTERFACE_VERSION, + .u.pcpu_info.xen_cpuid = 0, + }; + int ret = 0; + + /* Shouldn't need this as APIC is turned off for PV, and we only + * get called on the bootup processor. But just in case. */ + if (!xen_initial_domain() || smp_processor_id()) + return 0; + + if (reg == APIC_LVR) + return 0x10; + + if (reg != APIC_ID) + return 0; + + ret = HYPERVISOR_dom0_op(&op); + if (ret) + return 0; + + return op.u.pcpu_info.apic_id << 24; } static void xen_apic_write(u32 reg, u32 val) @@ -849,6 +880,8 @@ static void set_xen_basic_apic_ops(void) apic->icr_write = xen_apic_icr_write; apic->wait_icr_idle = xen_apic_wait_icr_idle; apic->safe_wait_icr_idle = xen_safe_apic_wait_icr_idle; + apic->set_apic_id = xen_set_apic_id; + apic->get_apic_id = xen_get_apic_id; } #endif -- cgit v1.2.3-70-g09d2 From b7e5ffe5d83fa40d702976d77452004abbe35791 Mon Sep 17 00:00:00 2001 From: Konrad Rzeszutek Wilk Date: Thu, 3 May 2012 16:14:14 -0400 Subject: xen/pte: Fix crashes when trying to see non-existent PGD/PMD/PUD/PTEs If I try to do "cat /sys/kernel/debug/kernel_page_tables" I end up with: BUG: unable to handle kernel paging request at ffffc7fffffff000 IP: [] ptdump_show+0x221/0x480 PGD 0 Oops: 0000 [#1] SMP CPU 0 .. snip.. RAX: 0000000000000000 RBX: ffffc00000000fff RCX: 0000000000000000 RDX: 0000800000000000 RSI: 0000000000000000 RDI: ffffc7fffffff000 which is due to the fact we are trying to access a PFN that is not accessible to us. The reason (at least in this case) was that PGD[256] is set to __HYPERVISOR_VIRT_START which was setup (by the hypervisor) to point to a read-only linear map of the MFN->PFN array. During our parsing we would get the MFN (a valid one), try to look it up in the MFN->PFN tree and find it invalid and return ~0 as PFN. Then pte_mfn_to_pfn would happilly feed that in, attach the flags and return it back to the caller. 'ptdump_show' bitshifts it and gets and invalid value that it tries to dereference. Instead of doing all of that, we detect the ~0 case and just return !_PAGE_PRESENT. This bug has been in existence .. at least until 2.6.37 (yikes!) CC: stable@kernel.org Signed-off-by: Konrad Rzeszutek Wilk --- arch/x86/xen/mmu.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/x86/xen/mmu.c b/arch/x86/xen/mmu.c index b8e279479a6..69f5857660a 100644 --- a/arch/x86/xen/mmu.c +++ b/arch/x86/xen/mmu.c @@ -353,8 +353,13 @@ static pteval_t pte_mfn_to_pfn(pteval_t val) { if (val & _PAGE_PRESENT) { unsigned long mfn = (val & PTE_PFN_MASK) >> PAGE_SHIFT; + unsigned long pfn = mfn_to_pfn(mfn); + pteval_t flags = val & PTE_FLAGS_MASK; - val = ((pteval_t)mfn_to_pfn(mfn) << PAGE_SHIFT) | flags; + if (unlikely(pfn == ~0)) + val = flags & ~_PAGE_PRESENT; + else + val = ((pteval_t)pfn << PAGE_SHIFT) | flags; } return val; -- cgit v1.2.3-70-g09d2 From 76a8df7b49168509df02461f83fab117a4a86e08 Mon Sep 17 00:00:00 2001 From: David Vrabel Date: Fri, 4 May 2012 14:29:46 +0100 Subject: xen/pci: don't use PCI BIOS service for configuration space accesses The accessing PCI configuration space with the PCI BIOS32 service does not work in PV guests. On systems without MMCONFIG or where the BIOS hasn't marked the MMCONFIG region as reserved in the e820 map, the BIOS service is probed (even though direct access is preferred) and this hangs. CC: stable@kernel.org Acked-by: Jan Beulich Signed-off-by: David Vrabel [v1: Fixed compile error when CONFIG_PCI is not set] Signed-off-by: Konrad Rzeszutek Wilk --- arch/x86/xen/enlighten.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c index 4f437dedbdf..95dccce8e97 100644 --- a/arch/x86/xen/enlighten.c +++ b/arch/x86/xen/enlighten.c @@ -63,6 +63,7 @@ #include #include #include +#include #ifdef CONFIG_ACPI #include @@ -1398,8 +1399,10 @@ asmlinkage void __init xen_start_kernel(void) /* Make sure ACS will be enabled */ pci_request_acs(); } - - +#ifdef CONFIG_PCI + /* PCI BIOS service won't work from a PV guest. */ + pci_probe &= ~PCI_PROBE_BIOS; +#endif xen_raw_console_write("about to get started...\n"); xen_setup_runstate_info(0); -- cgit v1.2.3-70-g09d2 From 83ca60094e5e907b8b43c60b4c29b1119604cbb8 Mon Sep 17 00:00:00 2001 From: Steven King Date: Sun, 6 May 2012 12:22:53 -0700 Subject: m68knommu: enable qspi support when SPI_COLDFIRE_QSPI = m Enable Coldfire QSPI support when SPI_COLDFIRE_QSPI is built as a module. This version of the patch combines changes to the config files and device.c and uses IF_ENABLED (thanks to Sam Ravnborg for the suggestion). Signed-off-by: Steven King Signed-off-by: Greg Ungerer --- arch/m68k/platform/520x/config.c | 6 +++--- arch/m68k/platform/523x/config.c | 6 +++--- arch/m68k/platform/5249/config.c | 6 +++--- arch/m68k/platform/527x/config.c | 6 +++--- arch/m68k/platform/528x/config.c | 6 +++--- arch/m68k/platform/532x/config.c | 6 +++--- arch/m68k/platform/coldfire/device.c | 6 +++--- 7 files changed, 21 insertions(+), 21 deletions(-) (limited to 'arch') diff --git a/arch/m68k/platform/520x/config.c b/arch/m68k/platform/520x/config.c index 235947844f2..09df4b89e8b 100644 --- a/arch/m68k/platform/520x/config.c +++ b/arch/m68k/platform/520x/config.c @@ -22,7 +22,7 @@ /***************************************************************************/ -#ifdef CONFIG_SPI_COLDFIRE_QSPI +#if IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI) static void __init m520x_qspi_init(void) { @@ -35,7 +35,7 @@ static void __init m520x_qspi_init(void) writew(par, MCF_GPIO_PAR_UART); } -#endif /* CONFIG_SPI_COLDFIRE_QSPI */ +#endif /* IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI) */ /***************************************************************************/ @@ -79,7 +79,7 @@ void __init config_BSP(char *commandp, int size) mach_sched_init = hw_timer_init; m520x_uarts_init(); m520x_fec_init(); -#ifdef CONFIG_SPI_COLDFIRE_QSPI +#if IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI) m520x_qspi_init(); #endif } diff --git a/arch/m68k/platform/523x/config.c b/arch/m68k/platform/523x/config.c index c8b405d5a96..d47dfd8f50a 100644 --- a/arch/m68k/platform/523x/config.c +++ b/arch/m68k/platform/523x/config.c @@ -22,7 +22,7 @@ /***************************************************************************/ -#ifdef CONFIG_SPI_COLDFIRE_QSPI +#if IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI) static void __init m523x_qspi_init(void) { @@ -36,7 +36,7 @@ static void __init m523x_qspi_init(void) writew(par, MCFGPIO_PAR_TIMER); } -#endif /* CONFIG_SPI_COLDFIRE_QSPI */ +#endif /* IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI) */ /***************************************************************************/ @@ -58,7 +58,7 @@ void __init config_BSP(char *commandp, int size) { mach_sched_init = hw_timer_init; m523x_fec_init(); -#ifdef CONFIG_SPI_COLDFIRE_QSPI +#if IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI) m523x_qspi_init(); #endif } diff --git a/arch/m68k/platform/5249/config.c b/arch/m68k/platform/5249/config.c index bbf05135bb9..300e729a58d 100644 --- a/arch/m68k/platform/5249/config.c +++ b/arch/m68k/platform/5249/config.c @@ -51,7 +51,7 @@ static struct platform_device *m5249_devices[] __initdata = { /***************************************************************************/ -#ifdef CONFIG_SPI_COLDFIRE_QSPI +#if IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI) static void __init m5249_qspi_init(void) { @@ -61,7 +61,7 @@ static void __init m5249_qspi_init(void) mcf_mapirq2imr(MCF_IRQ_QSPI, MCFINTC_QSPI); } -#endif /* CONFIG_SPI_COLDFIRE_QSPI */ +#endif /* IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI) */ /***************************************************************************/ @@ -90,7 +90,7 @@ void __init config_BSP(char *commandp, int size) #ifdef CONFIG_M5249C3 m5249_smc91x_init(); #endif -#ifdef CONFIG_SPI_COLDFIRE_QSPI +#if IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI) m5249_qspi_init(); #endif } diff --git a/arch/m68k/platform/527x/config.c b/arch/m68k/platform/527x/config.c index f91a53294c3..b3cb378c5e9 100644 --- a/arch/m68k/platform/527x/config.c +++ b/arch/m68k/platform/527x/config.c @@ -23,7 +23,7 @@ /***************************************************************************/ -#ifdef CONFIG_SPI_COLDFIRE_QSPI +#if IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI) static void __init m527x_qspi_init(void) { @@ -42,7 +42,7 @@ static void __init m527x_qspi_init(void) #endif } -#endif /* CONFIG_SPI_COLDFIRE_QSPI */ +#endif /* IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI) */ /***************************************************************************/ @@ -90,7 +90,7 @@ void __init config_BSP(char *commandp, int size) mach_sched_init = hw_timer_init; m527x_uarts_init(); m527x_fec_init(); -#ifdef CONFIG_SPI_COLDFIRE_QSPI +#if IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI) m527x_qspi_init(); #endif } diff --git a/arch/m68k/platform/528x/config.c b/arch/m68k/platform/528x/config.c index d4492926614..c5f11ba49be 100644 --- a/arch/m68k/platform/528x/config.c +++ b/arch/m68k/platform/528x/config.c @@ -24,7 +24,7 @@ /***************************************************************************/ -#ifdef CONFIG_SPI_COLDFIRE_QSPI +#if IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI) static void __init m528x_qspi_init(void) { @@ -32,7 +32,7 @@ static void __init m528x_qspi_init(void) __raw_writeb(0x07, MCFGPIO_PQSPAR); } -#endif /* CONFIG_SPI_COLDFIRE_QSPI */ +#endif /* IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI) */ /***************************************************************************/ @@ -98,7 +98,7 @@ void __init config_BSP(char *commandp, int size) mach_sched_init = hw_timer_init; m528x_uarts_init(); m528x_fec_init(); -#ifdef CONFIG_SPI_COLDFIRE_QSPI +#if IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI) m528x_qspi_init(); #endif } diff --git a/arch/m68k/platform/532x/config.c b/arch/m68k/platform/532x/config.c index 2bec3477b73..37082d02f2b 100644 --- a/arch/m68k/platform/532x/config.c +++ b/arch/m68k/platform/532x/config.c @@ -30,7 +30,7 @@ /***************************************************************************/ -#ifdef CONFIG_SPI_COLDFIRE_QSPI +#if IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI) static void __init m532x_qspi_init(void) { @@ -38,7 +38,7 @@ static void __init m532x_qspi_init(void) writew(0x01f0, MCF_GPIO_PAR_QSPI); } -#endif /* CONFIG_SPI_COLDFIRE_QSPI */ +#endif /* IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI) */ /***************************************************************************/ @@ -77,7 +77,7 @@ void __init config_BSP(char *commandp, int size) mach_sched_init = hw_timer_init; m532x_uarts_init(); m532x_fec_init(); -#ifdef CONFIG_SPI_COLDFIRE_QSPI +#if IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI) m532x_qspi_init(); #endif diff --git a/arch/m68k/platform/coldfire/device.c b/arch/m68k/platform/coldfire/device.c index 7af97362b95..3aa77ddea89 100644 --- a/arch/m68k/platform/coldfire/device.c +++ b/arch/m68k/platform/coldfire/device.c @@ -121,7 +121,7 @@ static struct platform_device mcf_fec1 = { #endif /* MCFFEC_BASE1 */ #endif /* CONFIG_FEC */ -#ifdef CONFIG_SPI_COLDFIRE_QSPI +#if IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI) /* * The ColdFire QSPI module is an SPI protocol hardware block used * on a number of different ColdFire CPUs. @@ -274,7 +274,7 @@ static struct platform_device mcf_qspi = { .resource = mcf_qspi_resources, .dev.platform_data = &mcf_qspi_data, }; -#endif /* CONFIG_SPI_COLDFIRE_QSPI */ +#endif /* IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI) */ static struct platform_device *mcf_devices[] __initdata = { &mcf_uart, @@ -284,7 +284,7 @@ static struct platform_device *mcf_devices[] __initdata = { &mcf_fec1, #endif #endif -#ifdef CONFIG_SPI_COLDFIRE_QSPI +#if IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI) &mcf_qspi, #endif }; -- cgit v1.2.3-70-g09d2 From de6c0b02d4d7bdf2587e679a6ddbb71b7d68bb89 Mon Sep 17 00:00:00 2001 From: David Gibson Date: Tue, 8 May 2012 20:24:08 +1000 Subject: KVM: PPC: Book3S HV: Fix refcounting of hugepages The H_REGISTER_VPA hcall implementation in HV Power KVM needs to pin some guest memory pages into host memory so that they can be safely accessed from usermode. It does this used get_user_pages_fast(). When the VPA is unregistered, or the VCPUs are cleaned up, these pages are released using put_page(). However, the get_user_pages() is invoked on the specific memory are of the VPA which could lie within hugepages. In case the pinned page is huge, we explicitly find the head page of the compound page before calling put_page() on it. At least with the latest kernel, this is not correct. put_page() already handles finding the correct head page of a compound, and also deals with various counts on the individual tail page which are important for transparent huge pages. We don't support transparent hugepages on Power, but even so, bypassing this count maintenance can lead (when the VM ends) to a hugepage being released back to the pool with a non-zero mapcount on one of the tail pages. This can then lead to a bad_page() when the page is released from the hugepage pool. This removes the explicit compound_head() call to correct this bug. Signed-off-by: David Gibson Signed-off-by: Paul Mackerras Acked-by: Alexander Graf Signed-off-by: Avi Kivity --- arch/powerpc/kvm/book3s_64_mmu_hv.c | 22 +++++++++++++--------- arch/powerpc/kvm/book3s_hv.c | 2 -- 2 files changed, 13 insertions(+), 11 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/kvm/book3s_64_mmu_hv.c b/arch/powerpc/kvm/book3s_64_mmu_hv.c index ddc485a529f..c3beaeef3f6 100644 --- a/arch/powerpc/kvm/book3s_64_mmu_hv.c +++ b/arch/powerpc/kvm/book3s_64_mmu_hv.c @@ -258,6 +258,8 @@ static long kvmppc_get_guest_page(struct kvm *kvm, unsigned long gfn, !(memslot->userspace_addr & (s - 1))) { start &= ~(s - 1); pgsize = s; + get_page(hpage); + put_page(page); page = hpage; } } @@ -281,11 +283,8 @@ static long kvmppc_get_guest_page(struct kvm *kvm, unsigned long gfn, err = 0; out: - if (got) { - if (PageHuge(page)) - page = compound_head(page); + if (got) put_page(page); - } return err; up_err: @@ -678,8 +677,15 @@ int kvmppc_book3s_hv_page_fault(struct kvm_run *run, struct kvm_vcpu *vcpu, SetPageDirty(page); out_put: - if (page) - put_page(page); + if (page) { + /* + * We drop pages[0] here, not page because page might + * have been set to the head page of a compound, but + * we have to drop the reference on the correct tail + * page to match the get inside gup() + */ + put_page(pages[0]); + } return ret; out_unlock: @@ -979,6 +985,7 @@ void *kvmppc_pin_guest_page(struct kvm *kvm, unsigned long gpa, pa = *physp; } page = pfn_to_page(pa >> PAGE_SHIFT); + get_page(page); } else { hva = gfn_to_hva_memslot(memslot, gfn); npages = get_user_pages_fast(hva, 1, 1, pages); @@ -991,8 +998,6 @@ void *kvmppc_pin_guest_page(struct kvm *kvm, unsigned long gpa, page = compound_head(page); psize <<= compound_order(page); } - if (!kvm->arch.using_mmu_notifiers) - get_page(page); offset = gpa & (psize - 1); if (nb_ret) *nb_ret = psize - offset; @@ -1003,7 +1008,6 @@ void kvmppc_unpin_guest_page(struct kvm *kvm, void *va) { struct page *page = virt_to_page(va); - page = compound_head(page); put_page(page); } diff --git a/arch/powerpc/kvm/book3s_hv.c b/arch/powerpc/kvm/book3s_hv.c index 01294a5099d..108d1f58017 100644 --- a/arch/powerpc/kvm/book3s_hv.c +++ b/arch/powerpc/kvm/book3s_hv.c @@ -1192,8 +1192,6 @@ static void unpin_slot(struct kvm *kvm, int slot_id) continue; pfn = physp[j] >> PAGE_SHIFT; page = pfn_to_page(pfn); - if (PageHuge(page)) - page = compound_head(page); SetPageDirty(page); put_page(page); } -- cgit v1.2.3-70-g09d2 From d5e28005a1d2e67833852f4c9ea8ec206ea3ff85 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Fri, 27 Apr 2012 10:54:35 -0700 Subject: percpu, x86: don't use PMD_SIZE as embedded atom_size on 32bit With the embed percpu first chunk allocator, x86 uses either PAGE_SIZE or PMD_SIZE for atom_size. PMD_SIZE is used when CPU supports PSE so that percpu areas are aligned to PMD mappings and possibly allow using PMD mappings in vmalloc areas in the future. Using larger atom_size doesn't waste actual memory; however, it does require larger vmalloc space allocation later on for !first chunks. With reasonably sized vmalloc area, PMD_SIZE shouldn't be a problem but x86_32 at this point is anything but reasonable in terms of address space and using larger atom_size reportedly leads to frequent percpu allocation failures on certain setups. As there is no reason to not use PMD_SIZE on x86_64 as vmalloc space is aplenty and most x86_64 configurations support PSE, fix the issue by always using PMD_SIZE on x86_64 and PAGE_SIZE on x86_32. v2: drop cpu_has_pse test and make x86_64 always use PMD_SIZE and x86_32 PAGE_SIZE as suggested by hpa. Signed-off-by: Tejun Heo Reported-by: Yanmin Zhang Reported-by: ShuoX Liu Acked-by: H. Peter Anvin LKML-Reference: <4F97BA98.6010001@intel.com> Cc: stable@vger.kernel.org --- arch/x86/kernel/setup_percpu.c | 14 +++++++++++++- 1 file changed, 13 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/x86/kernel/setup_percpu.c b/arch/x86/kernel/setup_percpu.c index 71f4727da37..5a98aa27218 100644 --- a/arch/x86/kernel/setup_percpu.c +++ b/arch/x86/kernel/setup_percpu.c @@ -185,10 +185,22 @@ void __init setup_per_cpu_areas(void) #endif rc = -EINVAL; if (pcpu_chosen_fc != PCPU_FC_PAGE) { - const size_t atom_size = cpu_has_pse ? PMD_SIZE : PAGE_SIZE; const size_t dyn_size = PERCPU_MODULE_RESERVE + PERCPU_DYNAMIC_RESERVE - PERCPU_FIRST_CHUNK_RESERVE; + size_t atom_size; + /* + * On 64bit, use PMD_SIZE for atom_size so that embedded + * percpu areas are aligned to PMD. This, in the future, + * can also allow using PMD mappings in vmalloc area. Use + * PAGE_SIZE on 32bit as vmalloc space is highly contended + * and large vmalloc area allocs can easily fail. + */ +#ifdef CONFIG_X86_64 + atom_size = PMD_SIZE; +#else + atom_size = PAGE_SIZE; +#endif rc = pcpu_embed_first_chunk(PERCPU_FIRST_CHUNK_RESERVE, dyn_size, atom_size, pcpu_cpu_distance, -- cgit v1.2.3-70-g09d2 From a7ac56de8316c0eb1111824c9add045cac2bd7a2 Mon Sep 17 00:00:00 2001 From: Ian Campbell Date: Sun, 29 Apr 2012 14:40:42 +0100 Subject: ARM: kirkwood: add missing kexec.h include Fixes the following build error when CONFIG_KEXEC is enabled: CC arch/arm/mach-kirkwood/board-dt.o arch/arm/mach-kirkwood/board-dt.c: In function 'kirkwood_dt_init': arch/arm/mach-kirkwood/board-dt.c:52:2: error: 'kexec_reinit' undeclared (first use in this function) arch/arm/mach-kirkwood/board-dt.c:52:2: note: each undeclared identifier is reported only once for each function it appears in Signed-off-by: Ian Campbell [v4, rebase onto recent Linus for repost] [v3, speak actual English in the commit message, thanks Sergei Shtylyov] [v2, using linux/kexec.h not asm/kexec.h] Signed-off-by: Jason Cooper --- arch/arm/mach-kirkwood/board-dt.c | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/arm/mach-kirkwood/board-dt.c b/arch/arm/mach-kirkwood/board-dt.c index 1c672d9e665..f7fe1b9f317 100644 --- a/arch/arm/mach-kirkwood/board-dt.c +++ b/arch/arm/mach-kirkwood/board-dt.c @@ -14,6 +14,7 @@ #include #include #include +#include #include #include #include -- cgit v1.2.3-70-g09d2 From 48d99f47a81a66bdd61a348c7fe8df5a7afdf5f3 Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Sun, 8 Apr 2012 05:18:53 +0100 Subject: ARM: orion5x: Fix GPIO enable bits for MPP9 Commit 554cdaefd1cf7bb54b209c4e68c7cec87ce442a9 ('ARM: orion5x: Refactor mpp code to use common orion platform mpp.') seems to have accidentally inverted the GPIO valid bits for MPP9 (only). For the mv2120 platform which uses MPP9 as a GPIO LED device, this results in the error: [ 12.711476] leds-gpio: probe of leds-gpio failed with error -22 Reported-by: Henry von Tresckow References: http://bugs.debian.org/667446 Signed-off-by: Ben Hutchings Cc: stable@vger.kernel.org [v3.0+] Tested-by: Hans Henry von Tresckow Signed-off-by: Jason Cooper --- arch/arm/mach-orion5x/mpp.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-orion5x/mpp.h b/arch/arm/mach-orion5x/mpp.h index eac68978a2c..db70e79a119 100644 --- a/arch/arm/mach-orion5x/mpp.h +++ b/arch/arm/mach-orion5x/mpp.h @@ -65,8 +65,8 @@ #define MPP8_GIGE MPP(8, 0x1, 0, 0, 1, 1, 1) #define MPP9_UNUSED MPP(9, 0x0, 0, 0, 1, 1, 1) -#define MPP9_GPIO MPP(9, 0x0, 0, 0, 1, 1, 1) -#define MPP9_GIGE MPP(9, 0x1, 1, 1, 1, 1, 1) +#define MPP9_GPIO MPP(9, 0x0, 1, 1, 1, 1, 1) +#define MPP9_GIGE MPP(9, 0x1, 0, 0, 1, 1, 1) #define MPP10_UNUSED MPP(10, 0x0, 0, 0, 1, 1, 1) #define MPP10_GPIO MPP(10, 0x0, 1, 1, 1, 1, 1) -- cgit v1.2.3-70-g09d2 From 56dfa7fa19e36db352a94be022243ed461710119 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Tue, 8 May 2012 13:31:59 +1000 Subject: powerpc/irq: Fix bug with new lazy IRQ handling code We had a case where we could turn on hard interrupts while leaving the PACA_IRQ_HARD_DIS bit set in the PACA. This can in turn cause a BUG_ON() to hit in __check_irq_replay() due to interrupt state getting out of sync. The assembly code was also way too convoluted. Instead, we now leave it to the C code to do the right thing which ends up being smaller and more readable. Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/entry_64.S | 18 ------------------ arch/powerpc/kernel/irq.c | 8 +++++++- 2 files changed, 7 insertions(+), 19 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/kernel/entry_64.S b/arch/powerpc/kernel/entry_64.S index f8a7a1a1a9f..fc6015027a8 100644 --- a/arch/powerpc/kernel/entry_64.S +++ b/arch/powerpc/kernel/entry_64.S @@ -767,16 +767,6 @@ do_work: SOFT_DISABLE_INTS(r3,r4) 1: bl .preempt_schedule_irq - /* Hard-disable interrupts again (and update PACA) */ -#ifdef CONFIG_PPC_BOOK3E - wrteei 0 -#else - ld r10,PACAKMSR(r13) /* Get kernel MSR without EE */ - mtmsrd r10,1 -#endif /* CONFIG_PPC_BOOK3E */ - li r0,PACA_IRQ_HARD_DIS - stb r0,PACAIRQHAPPENED(r13) - /* Re-test flags and eventually loop */ clrrdi r9,r1,THREAD_SHIFT ld r4,TI_FLAGS(r9) @@ -787,14 +777,6 @@ do_work: user_work: #endif /* CONFIG_PREEMPT */ - /* Enable interrupts */ -#ifdef CONFIG_PPC_BOOK3E - wrteei 1 -#else - ori r10,r10,MSR_EE - mtmsrd r10,1 -#endif /* CONFIG_PPC_BOOK3E */ - andi. r0,r4,_TIF_NEED_RESCHED beq 1f bl .restore_interrupts diff --git a/arch/powerpc/kernel/irq.c b/arch/powerpc/kernel/irq.c index 43eb74fcedd..c6c6f3b7f8c 100644 --- a/arch/powerpc/kernel/irq.c +++ b/arch/powerpc/kernel/irq.c @@ -260,11 +260,17 @@ EXPORT_SYMBOL(arch_local_irq_restore); * if they are currently disabled. This is typically called before * schedule() or do_signal() when returning to userspace. We do it * in C to avoid the burden of dealing with lockdep etc... + * + * NOTE: This is called with interrupts hard disabled but not marked + * as such in paca->irq_happened, so we need to resync this. */ void restore_interrupts(void) { - if (irqs_disabled()) + if (irqs_disabled()) { + local_paca->irq_happened |= PACA_IRQ_HARD_DIS; local_irq_enable(); + } else + __hard_irq_enable(); } #endif /* CONFIG_PPC64 */ -- cgit v1.2.3-70-g09d2 From a3512b2dd57cb653bb33645ca9c934436e547e3c Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Tue, 8 May 2012 13:38:50 +1000 Subject: powerpc/irq: Make alignment & program interrupt behave the same Alignment was the last user of the ENABLE_INTS macro, which we can now remove. All non-syscall exceptions now disable interrupts on entry, they get re-enabled conditionally from C code. Don't unconditionally re-enable in program check either, check the original context. Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/include/asm/exception-64s.h | 7 ------- arch/powerpc/kernel/exceptions-64s.S | 2 +- arch/powerpc/kernel/traps.c | 10 ++++++++-- 3 files changed, 9 insertions(+), 10 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/include/asm/exception-64s.h b/arch/powerpc/include/asm/exception-64s.h index 548da3aa0a3..d58fc4e4149 100644 --- a/arch/powerpc/include/asm/exception-64s.h +++ b/arch/powerpc/include/asm/exception-64s.h @@ -288,13 +288,6 @@ label##_hv: \ /* Exception addition: Hard disable interrupts */ #define DISABLE_INTS SOFT_DISABLE_INTS(r10,r11) -/* Exception addition: Keep interrupt state */ -#define ENABLE_INTS \ - ld r11,PACAKMSR(r13); \ - ld r12,_MSR(r1); \ - rlwimi r11,r12,0,MSR_EE; \ - mtmsrd r11,1 - #define ADD_NVGPRS \ bl .save_nvgprs diff --git a/arch/powerpc/kernel/exceptions-64s.S b/arch/powerpc/kernel/exceptions-64s.S index cb705fdbb45..8f880bc77c5 100644 --- a/arch/powerpc/kernel/exceptions-64s.S +++ b/arch/powerpc/kernel/exceptions-64s.S @@ -768,8 +768,8 @@ alignment_common: std r3,_DAR(r1) std r4,_DSISR(r1) bl .save_nvgprs + DISABLE_INTS addi r3,r1,STACK_FRAME_OVERHEAD - ENABLE_INTS bl .alignment_exception b .ret_from_except diff --git a/arch/powerpc/kernel/traps.c b/arch/powerpc/kernel/traps.c index 6aa0c663e24..158972341a2 100644 --- a/arch/powerpc/kernel/traps.c +++ b/arch/powerpc/kernel/traps.c @@ -248,7 +248,7 @@ void _exception(int signr, struct pt_regs *regs, int code, unsigned long addr) addr, regs->nip, regs->link, code); } - if (!arch_irq_disabled_regs(regs)) + if (arch_irqs_disabled() && !arch_irq_disabled_regs(regs)) local_irq_enable(); memset(&info, 0, sizeof(info)); @@ -1019,7 +1019,9 @@ void __kprobes program_check_exception(struct pt_regs *regs) return; } - local_irq_enable(); + /* We restore the interrupt state now */ + if (!arch_irq_disabled_regs(regs)) + local_irq_enable(); #ifdef CONFIG_MATH_EMULATION /* (reason & REASON_ILLEGAL) would be the obvious thing here, @@ -1069,6 +1071,10 @@ void alignment_exception(struct pt_regs *regs) { int sig, code, fixed = 0; + /* We restore the interrupt state now */ + if (!arch_irq_disabled_regs(regs)) + local_irq_enable(); + /* we don't implement logging of alignment exceptions */ if (!(current->thread.align_ctl & PR_UNALIGN_SIGBUS)) fixed = fix_alignment(regs); -- cgit v1.2.3-70-g09d2 From 331b646d60b0c3885208e1e02bd9f40319953efc Mon Sep 17 00:00:00 2001 From: Avi Kivity Date: Wed, 18 Apr 2012 19:23:50 +0300 Subject: KVM: ia64: fix build due to typo s/kcm/kvm/. Signed-off-by: Marcelo Tosatti Signed-off-by: Avi Kivity --- arch/ia64/kvm/kvm-ia64.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/ia64/kvm/kvm-ia64.c b/arch/ia64/kvm/kvm-ia64.c index f5104b7c52c..463fb3bbe11 100644 --- a/arch/ia64/kvm/kvm-ia64.c +++ b/arch/ia64/kvm/kvm-ia64.c @@ -1174,7 +1174,7 @@ out: bool kvm_vcpu_compatible(struct kvm_vcpu *vcpu) { - return irqchip_in_kernel(vcpu->kcm) == (vcpu->arch.apic != NULL); + return irqchip_in_kernel(vcpu->kvm) == (vcpu->arch.apic != NULL); } int kvm_arch_vcpu_init(struct kvm_vcpu *vcpu) -- cgit v1.2.3-70-g09d2 From 1a21932edc10de0dfd843797427719e5da43355b Mon Sep 17 00:00:00 2001 From: Enrico Butera Date: Wed, 9 May 2012 11:27:59 +0200 Subject: ARM: OMAP: igep0020: fix smsc911x dummy regulator id id 0 is already used and causes errors at boot: WARNING: at fs/sysfs/dir.c:508 sysfs_add_one+0x9c/0xac() sysfs: cannot create duplicate filename '/devices/platform/reg-fixed-voltage.0' Fix it by using the next available one (id=1). This was caused by 5b3689f4 (ARM: OMAP2+: smsc911x: Add fixed board regulators) that did not account for some regulators already being used. Signed-off-by: Enrico Butera [tony@atomide.com: updated comments for regression causing commit] Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/board-igep0020.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c index 930c0d38043..740cee9369b 100644 --- a/arch/arm/mach-omap2/board-igep0020.c +++ b/arch/arm/mach-omap2/board-igep0020.c @@ -641,7 +641,7 @@ static struct regulator_consumer_supply dummy_supplies[] = { static void __init igep_init(void) { - regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies)); + regulator_register_fixed(1, dummy_supplies, ARRAY_SIZE(dummy_supplies)); omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); /* Get IGEP2 hardware revision */ -- cgit v1.2.3-70-g09d2 From a5a737e090e25981e99d69f01400e3a80356581c Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Thu, 10 May 2012 11:00:46 -0700 Subject: sparc64: Do not clobber %g2 in xcall_fetch_glob_regs(). %g2 is meant to hold the CPUID number throughout this routine, since at the very beginning, and at the very end, we use %g2 to calculate indexes into per-cpu arrays. However we erroneously clobber it in order to hold the %cwp register value mid-stream. Fix this code to use %g3 for the %cwp read and related calulcations instead. Reported-by: Meelis Roos Signed-off-by: David S. Miller --- arch/sparc/kernel/central.c | 2 +- arch/sparc/mm/ultra.S | 6 +++--- 2 files changed, 4 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/sparc/kernel/central.c b/arch/sparc/kernel/central.c index 38d48a59879..9708851a8b9 100644 --- a/arch/sparc/kernel/central.c +++ b/arch/sparc/kernel/central.c @@ -269,4 +269,4 @@ static int __init sunfire_init(void) return 0; } -subsys_initcall(sunfire_init); +fs_initcall(sunfire_init); diff --git a/arch/sparc/mm/ultra.S b/arch/sparc/mm/ultra.S index b57a5942ba6..874162a11ce 100644 --- a/arch/sparc/mm/ultra.S +++ b/arch/sparc/mm/ultra.S @@ -495,11 +495,11 @@ xcall_fetch_glob_regs: stx %o7, [%g1 + GR_SNAP_O7] stx %i7, [%g1 + GR_SNAP_I7] /* Don't try this at home kids... */ - rdpr %cwp, %g2 - sub %g2, 1, %g7 + rdpr %cwp, %g3 + sub %g3, 1, %g7 wrpr %g7, %cwp mov %i7, %g7 - wrpr %g2, %cwp + wrpr %g3, %cwp stx %g7, [%g1 + GR_SNAP_RPC] sethi %hi(trap_block), %g7 or %g7, %lo(trap_block), %g7 -- cgit v1.2.3-70-g09d2 From 1cab4201f00d06bd15c51cdfb12b233b588cdb61 Mon Sep 17 00:00:00 2001 From: Rolf Eike Beer Date: Thu, 10 May 2012 22:57:11 +0200 Subject: parisc: add missing includes in asm/spinlock.h MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This leads to this errors: In file included from arch/parisc/include/asm/atomic.h:20:0, from include/linux/atomic.h:4, from arch/parisc/include/asm/bitops.h:56, from include/linux/bitops.h:22, from include/linux/kernel.h:19, from include/linux/sched.h:55, from arch/parisc/kernel/asm-offsets.c:31: arch/parisc/include/asm/spinlock.h: In function ‘arch_spin_is_locked’: arch/parisc/include/asm/spinlock.h:9:2: error: implicit declaration of function ‘__ldcw_align’ [-Werror=implicit-function-declaration] arch/parisc/include/asm/spinlock.h:9:29: warning: initialization makes pointer from integer without a cast [enabled by default] arch/parisc/include/asm/spinlock.h: In function ‘arch_spin_lock_flags’: arch/parisc/include/asm/spinlock.h:22:2: error: implicit declaration of function ‘mb’ [-Werror=implicit-function-declaration] arch/parisc/include/asm/spinlock.h:23:4: warning: assignment makes pointer from integer without a cast [enabled by default] arch/parisc/include/asm/spinlock.h:24:2: error: implicit declaration of function ‘__ldcw’ [-Werror=implicit-function-declaration] Signed-off-by: Rolf Eike Beer Signed-off-by: Linus Torvalds --- arch/parisc/include/asm/spinlock.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch') diff --git a/arch/parisc/include/asm/spinlock.h b/arch/parisc/include/asm/spinlock.h index 804aa28ab1d..3516e0b2704 100644 --- a/arch/parisc/include/asm/spinlock.h +++ b/arch/parisc/include/asm/spinlock.h @@ -1,6 +1,8 @@ #ifndef __ASM_SPINLOCK_H #define __ASM_SPINLOCK_H +#include +#include #include #include -- cgit v1.2.3-70-g09d2 From 25fe853d2ce5cad4115a211c568b430b1e4080bc Mon Sep 17 00:00:00 2001 From: Rolf Eike Beer Date: Thu, 10 May 2012 23:01:40 +0200 Subject: parisc: add missing forward declarations in asm/hardware.h MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Fixes this warnings: In file included from arch/parisc/include/asm/processor.h:15:0, from arch/parisc/include/asm/spinlock.h:4, from arch/parisc/include/asm/atomic.h:20, from include/linux/atomic.h:4, from arch/parisc/include/asm/bitops.h:11, from include/linux/bitops.h:22, from include/linux/kernel.h:19, from include/linux/sched.h:55, from arch/parisc/kernel/asm-offsets.c:31: arch/parisc/include/asm/hardware.h:106:10: warning: ‘struct hardware_path’ declared inside parameter list [enabled by default] arch/parisc/include/asm/hardware.h:106:10: warning: its scope is only this definition or declaration, which is probably not what you want [enabled by default] arch/parisc/include/asm/hardware.h:116:59: warning: ‘struct hardware_path’ declared inside parameter list [enabled by default] arch/parisc/include/asm/hardware.h:118:47: warning: ‘struct hardware_path’ declared inside parameter list [enabled by default] arch/parisc/include/asm/hardware.h:119:57: warning: ‘struct hardware_path’ declared inside parameter list [enabled by default] Signed-off-by: Rolf Eike Beer Signed-off-by: Linus Torvalds --- arch/parisc/include/asm/hardware.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch') diff --git a/arch/parisc/include/asm/hardware.h b/arch/parisc/include/asm/hardware.h index 4e9626836ba..036e70310fc 100644 --- a/arch/parisc/include/asm/hardware.h +++ b/arch/parisc/include/asm/hardware.h @@ -95,12 +95,14 @@ struct bc_module { #define HPHW_MC 15 #define HPHW_FAULTY 31 +struct parisc_device_id; /* hardware.c: */ extern const char *parisc_hardware_description(struct parisc_device_id *id); extern enum cpu_type parisc_get_cpu_type(unsigned long hversion); struct pci_dev; +struct hardware_path; /* drivers.c: */ extern struct parisc_device *alloc_pa_dev(unsigned long hpa, -- cgit v1.2.3-70-g09d2 From 6eb608f554e79b89100b82fb8eea558a8d6e279b Mon Sep 17 00:00:00 2001 From: Rolf Eike Beer Date: Thu, 10 May 2012 23:03:26 +0200 Subject: parisc: drop include of asm/pdc.h from asm/hardware.h MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit It seems none of the symbols defined by pdc.h is needed, but it introduces an include loop causing compile errors: In file included from arch/parisc/include/asm/spinlock.h:4:0, from arch/parisc/include/asm/atomic.h:20, from include/linux/atomic.h:4, from arch/parisc/include/asm/bitops.h:56, from include/linux/bitops.h:35, from include/asm-generic/getorder.h:7, from arch/parisc/include/asm/page.h:162, from arch/parisc/include/asm/pdc.h:346, from arch/parisc/include/asm/hardware.h:5, from arch/parisc/kernel/hardware.c:30: arch/parisc/include/asm/processor.h:74:16: error: field ‘cpu_type’ has incomplete type arch/parisc/include/asm/processor.h:77:20: error: field ‘model’ has incomplete type arch/parisc/include/asm/processor.h: In function ‘parisc_requires_coherency’: arch/parisc/include/asm/processor.h:349:36: error: ‘mako’ undeclared (first use in this function) arch/parisc/include/asm/processor.h:349:36: note: each undeclared identifier is reported only once for each function it appears in arch/parisc/include/asm/processor.h:350:30: error: ‘mako2’ undeclared (first use in this function) Signed-off-by: Rolf Eike Beer Acked-by: Grant Grundler Signed-off-by: Linus Torvalds --- arch/parisc/include/asm/hardware.h | 1 - 1 file changed, 1 deletion(-) (limited to 'arch') diff --git a/arch/parisc/include/asm/hardware.h b/arch/parisc/include/asm/hardware.h index 036e70310fc..d1d864b81ba 100644 --- a/arch/parisc/include/asm/hardware.h +++ b/arch/parisc/include/asm/hardware.h @@ -2,7 +2,6 @@ #define _PARISC_HARDWARE_H #include -#include #define HWTYPE_ANY_ID PA_HWTYPE_ANY_ID #define HVERSION_ANY_ID PA_HVERSION_ANY_ID -- cgit v1.2.3-70-g09d2 From 9b05b1ec40bf6b1b20493617461e97c6a5d55403 Mon Sep 17 00:00:00 2001 From: Rolf Eike Beer Date: Thu, 10 May 2012 23:07:16 +0200 Subject: parisc: add missing include of asm/page.h to asm/pgtable.h Fixes these errors: In file included from arch/parisc/include/asm/io.h:5:0, from include/linux/io.h:22, from include/linux/pci.h:54, from arch/parisc/kernel/setup.c:35: arch/parisc/include/asm/pgtable.h:92:6: warning: "PAGE_SHIFT" is not defined [-Wundef] arch/parisc/include/asm/pgtable.h:92:6: warning: "PAGE_SHIFT" is not defined [-Wundef] arch/parisc/include/asm/pgtable.h:92:6: warning: "BITS_PER_PTE_ENTRY" is not defined [-Wundef] Signed-off-by: Rolf Eike Beer Signed-off-by: Linus Torvalds --- arch/parisc/include/asm/pgtable.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch') diff --git a/arch/parisc/include/asm/pgtable.h b/arch/parisc/include/asm/pgtable.h index 22dadeb5869..ee99f233935 100644 --- a/arch/parisc/include/asm/pgtable.h +++ b/arch/parisc/include/asm/pgtable.h @@ -44,6 +44,8 @@ struct vm_area_struct; #endif /* !__ASSEMBLY__ */ +#include + #define pte_ERROR(e) \ printk("%s:%d: bad pte %08lx.\n", __FILE__, __LINE__, pte_val(e)) #define pmd_ERROR(e) \ -- cgit v1.2.3-70-g09d2 From 4a8a0788a36c923a0229beae5e88d9849e359db5 Mon Sep 17 00:00:00 2001 From: Rolf Eike Beer Date: Thu, 10 May 2012 23:08:17 +0200 Subject: parisc: move definition of PAGE0 to asm/page.h MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This was defined in asm/pdc.h which needs to include asm/page.h for __PAGE_OFFSET. This leads to an include loop so that page.h eventually will include pdc.h again. While this is no problem because of header guards, it is a problem because some symbols may be undefined. Such an error is this: In file included from include/linux/bitops.h:35:0, from include/asm-generic/getorder.h:7, from arch/parisc/include/asm/page.h:162, from arch/parisc/include/asm/pdc.h:346, from arch/parisc/include/asm/processor.h:16, from arch/parisc/include/asm/spinlock.h:6, from arch/parisc/include/asm/atomic.h:20, from include/linux/atomic.h:4, from include/linux/sysfs.h:20, from include/linux/kobject.h:21, from include/linux/device.h:17, from include/linux/eisa.h:5, from arch/parisc/kernel/pci.c:11: arch/parisc/include/asm/bitops.h: In function ‘set_bit’: arch/parisc/include/asm/bitops.h:82:2: error: implicit declaration of function ‘_atomic_spin_lock_irqsave’ [-Werror=implicit-function-declaration] arch/parisc/include/asm/bitops.h:84:2: error: implicit declaration of function ‘_atomic_spin_unlock_irqrestore’ [-Werror=implicit-function-declaration] Signed-off-by: Rolf Eike Beer Signed-off-by: Linus Torvalds --- arch/parisc/include/asm/page.h | 6 ++++++ arch/parisc/include/asm/pdc.h | 7 ------- arch/parisc/kernel/pdc_cons.c | 1 + arch/parisc/kernel/time.c | 1 + drivers/parisc/sba_iommu.c | 1 + drivers/video/console/sticore.c | 2 ++ 6 files changed, 11 insertions(+), 7 deletions(-) (limited to 'arch') diff --git a/arch/parisc/include/asm/page.h b/arch/parisc/include/asm/page.h index a84cc1f925f..4e0e7dbf0f3 100644 --- a/arch/parisc/include/asm/page.h +++ b/arch/parisc/include/asm/page.h @@ -160,5 +160,11 @@ extern int npmem_ranges; #include #include +#include + +#define PAGE0 ((struct zeropage *)__PAGE_OFFSET) + +/* DEFINITION OF THE ZERO-PAGE (PAG0) */ +/* based on work by Jason Eckhardt (jason@equator.com) */ #endif /* _PARISC_PAGE_H */ diff --git a/arch/parisc/include/asm/pdc.h b/arch/parisc/include/asm/pdc.h index 4ca510b3c6f..7f0f2d23059 100644 --- a/arch/parisc/include/asm/pdc.h +++ b/arch/parisc/include/asm/pdc.h @@ -343,8 +343,6 @@ #ifdef __KERNEL__ -#include /* for __PAGE_OFFSET */ - extern int pdc_type; /* Values for pdc_type */ @@ -677,11 +675,6 @@ static inline char * os_id_to_string(u16 os_id) { #endif /* __KERNEL__ */ -#define PAGE0 ((struct zeropage *)__PAGE_OFFSET) - -/* DEFINITION OF THE ZERO-PAGE (PAG0) */ -/* based on work by Jason Eckhardt (jason@equator.com) */ - /* flags of the device_path */ #define PF_AUTOBOOT 0x80 #define PF_AUTOSEARCH 0x40 diff --git a/arch/parisc/kernel/pdc_cons.c b/arch/parisc/kernel/pdc_cons.c index 0b3393381a8..47341aa208f 100644 --- a/arch/parisc/kernel/pdc_cons.c +++ b/arch/parisc/kernel/pdc_cons.c @@ -50,6 +50,7 @@ #include #include #include +#include /* for PAGE0 */ #include /* for iodc_call() proto and friends */ static DEFINE_SPINLOCK(pdc_console_lock); diff --git a/arch/parisc/kernel/time.c b/arch/parisc/kernel/time.c index 7c0774397b8..70e105d6242 100644 --- a/arch/parisc/kernel/time.c +++ b/arch/parisc/kernel/time.c @@ -29,6 +29,7 @@ #include #include #include +#include #include #include #include diff --git a/drivers/parisc/sba_iommu.c b/drivers/parisc/sba_iommu.c index 8644d5372e7..42cfcd9eb9a 100644 --- a/drivers/parisc/sba_iommu.c +++ b/drivers/parisc/sba_iommu.c @@ -44,6 +44,7 @@ #include #include /* for proc_mckinley_root */ #include /* for proc_runway_root */ +#include /* for PAGE0 */ #include /* for PDC_MODEL_* */ #include /* for is_pdc_pat() */ #include diff --git a/drivers/video/console/sticore.c b/drivers/video/console/sticore.c index 6468a297e34..39571f9e016 100644 --- a/drivers/video/console/sticore.c +++ b/drivers/video/console/sticore.c @@ -22,7 +22,9 @@ #include #include +#include #include +#include #include #include -- cgit v1.2.3-70-g09d2 From 7c0482e3d055e5de056d3c693b821e39205b99ae Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Thu, 10 May 2012 16:12:38 +0000 Subject: powerpc/irq: Fix another case of lazy IRQ state getting out of sync So we have another case of paca->irq_happened getting out of sync with the HW irq state. This can happen when a perfmon interrupt occurs while soft disabled, as it will return to a soft disabled but hard enabled context while leaving a stale PACA_IRQ_HARD_DIS flag set. This patch fixes it, and also adds a test for the condition of those flags being out of sync in arch_local_irq_restore() when CONFIG_TRACE_IRQFLAGS is enabled. This helps catching those gremlins faster (and so far I can't seem see any anymore, so that's good news). Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/entry_64.S | 44 +++++++++++++++++++++++++++++------------- arch/powerpc/kernel/irq.c | 13 +++++++++++++ 2 files changed, 44 insertions(+), 13 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/kernel/entry_64.S b/arch/powerpc/kernel/entry_64.S index fc6015027a8..ef2074c3e90 100644 --- a/arch/powerpc/kernel/entry_64.S +++ b/arch/powerpc/kernel/entry_64.S @@ -588,23 +588,19 @@ _GLOBAL(ret_from_except_lite) fast_exc_return_irq: restore: /* - * This is the main kernel exit path, we first check if we - * have to change our interrupt state. + * This is the main kernel exit path. First we check if we + * are about to re-enable interrupts */ ld r5,SOFTE(r1) lbz r6,PACASOFTIRQEN(r13) - cmpwi cr1,r5,0 - cmpw cr0,r5,r6 - beq cr0,4f + cmpwi cr0,r5,0 + beq restore_irq_off - /* We do, handle disable first, which is easy */ - bne cr1,3f; - li r0,0 - stb r0,PACASOFTIRQEN(r13); - TRACE_DISABLE_INTS - b 4f + /* We are enabling, were we already enabled ? Yes, just return */ + cmpwi cr0,r6,1 + beq cr0,do_restore -3: /* + /* * We are about to soft-enable interrupts (we are hard disabled * at this point). We check if there's anything that needs to * be replayed first. @@ -626,7 +622,7 @@ restore_no_replay: /* * Final return path. BookE is handled in a different file */ -4: +do_restore: #ifdef CONFIG_PPC_BOOK3E b .exception_return_book3e #else @@ -699,6 +695,25 @@ fast_exception_return: #endif /* CONFIG_PPC_BOOK3E */ + /* + * We are returning to a context with interrupts soft disabled. + * + * However, we may also about to hard enable, so we need to + * make sure that in this case, we also clear PACA_IRQ_HARD_DIS + * or that bit can get out of sync and bad things will happen + */ +restore_irq_off: + ld r3,_MSR(r1) + lbz r7,PACAIRQHAPPENED(r13) + andi. r0,r3,MSR_EE + beq 1f + rlwinm r7,r7,0,~PACA_IRQ_HARD_DIS + stb r7,PACAIRQHAPPENED(r13) +1: li r0,0 + stb r0,PACASOFTIRQEN(r13); + TRACE_DISABLE_INTS + b do_restore + /* * Something did happen, check if a re-emit is needed * (this also clears paca->irq_happened) @@ -748,6 +763,9 @@ restore_check_irq_replay: #endif /* CONFIG_PPC_BOOK3E */ 1: b .ret_from_except /* What else to do here ? */ + + +3: do_work: #ifdef CONFIG_PREEMPT andi. r0,r3,MSR_PR /* Returning to user mode? */ diff --git a/arch/powerpc/kernel/irq.c b/arch/powerpc/kernel/irq.c index c6c6f3b7f8c..641da9e868c 100644 --- a/arch/powerpc/kernel/irq.c +++ b/arch/powerpc/kernel/irq.c @@ -229,6 +229,19 @@ notrace void arch_local_irq_restore(unsigned long en) */ if (unlikely(irq_happened != PACA_IRQ_HARD_DIS)) __hard_irq_disable(); +#ifdef CONFIG_TRACE_IRQFLAG + else { + /* + * We should already be hard disabled here. We had bugs + * where that wasn't the case so let's dbl check it and + * warn if we are wrong. Only do that when IRQ tracing + * is enabled as mfmsr() can be costly. + */ + if (WARN_ON(mfmsr() & MSR_EE)) + __hard_irq_disable(); + } +#endif /* CONFIG_TRACE_IRQFLAG */ + set_soft_enabled(0); /* -- cgit v1.2.3-70-g09d2 From 2b3e38c4fbeb88092390f7c29b4934212abe9ded Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Mon, 16 Apr 2012 23:09:13 +0200 Subject: ARM: mach-shmobile: convert mackerel to use the generic MMC GPIO hotplug helper This also fixes the following modular mmc build failure: arch/arm/mach-shmobile/built-in.o: In function `ag5evm_sdhi0_gpio_cd': pfc-sh73a0.c:(.text+0x7c0): undefined reference to `mmc_detect_change' on this platform by eliminating the use of an inline function, which calls into the mmc core. Signed-off-by: Guennadi Liakhovetski Tested-by: Simon Horman Acked-by: Magnus Damm Signed-off-by: Rafael J. Wysocki --- arch/arm/mach-shmobile/board-mackerel.c | 22 ++-------------------- 1 file changed, 2 insertions(+), 20 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-shmobile/board-mackerel.c b/arch/arm/mach-shmobile/board-mackerel.c index f49e28abe0a..8c6202bb6ae 100644 --- a/arch/arm/mach-shmobile/board-mackerel.c +++ b/arch/arm/mach-shmobile/board-mackerel.c @@ -1011,21 +1011,12 @@ static int slot_cn7_get_cd(struct platform_device *pdev) } /* SDHI0 */ -static irqreturn_t mackerel_sdhi0_gpio_cd(int irq, void *arg) -{ - struct device *dev = arg; - struct sh_mobile_sdhi_info *info = dev->platform_data; - struct tmio_mmc_data *pdata = info->pdata; - - tmio_mmc_cd_wakeup(pdata); - - return IRQ_HANDLED; -} - static struct sh_mobile_sdhi_info sdhi0_info = { .dma_slave_tx = SHDMA_SLAVE_SDHI0_TX, .dma_slave_rx = SHDMA_SLAVE_SDHI0_RX, + .tmio_flags = TMIO_MMC_USE_GPIO_CD, .tmio_caps = MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ, + .cd_gpio = GPIO_PORT172, }; static struct resource sdhi0_resources[] = { @@ -1384,7 +1375,6 @@ static void __init mackerel_init(void) { u32 srcr4; struct clk *clk; - int ret; /* External clock source */ clk_set_rate(&sh7372_dv_clki_clk, 27000000); @@ -1481,7 +1471,6 @@ static void __init mackerel_init(void) irq_set_irq_type(IRQ21, IRQ_TYPE_LEVEL_HIGH); /* enable SDHI0 */ - gpio_request(GPIO_FN_SDHICD0, NULL); gpio_request(GPIO_FN_SDHIWP0, NULL); gpio_request(GPIO_FN_SDHICMD0, NULL); gpio_request(GPIO_FN_SDHICLK0, NULL); @@ -1490,13 +1479,6 @@ static void __init mackerel_init(void) gpio_request(GPIO_FN_SDHID0_1, NULL); gpio_request(GPIO_FN_SDHID0_0, NULL); - ret = request_irq(evt2irq(0x3340), mackerel_sdhi0_gpio_cd, - IRQF_TRIGGER_FALLING, "sdhi0 cd", &sdhi0_device.dev); - if (!ret) - sdhi0_info.tmio_flags |= TMIO_MMC_HAS_COLD_CD; - else - pr_err("Cannot get IRQ #%d: %d\n", evt2irq(0x3340), ret); - #if !defined(CONFIG_MMC_SH_MMCIF) && !defined(CONFIG_MMC_SH_MMCIF_MODULE) /* enable SDHI1 */ gpio_request(GPIO_FN_SDHICMD1, NULL); -- cgit v1.2.3-70-g09d2 From 173e2fec4d9e950ee5e4bba272091e248a961c98 Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Mon, 16 Apr 2012 23:09:19 +0200 Subject: ARM: mach-shmobile: convert ag5evm to use the generic MMC GPIO hotplug helper This also fixes the following modular mmc build failure: arch/arm/mach-shmobile/built-in.o: In function `mackerel_sdhi0_gpio_cd': pfc-sh7372.c:(.text+0x1138): undefined reference to `mmc_detect_change' on this platform by eliminating the use of an inline function, which calls into the mmc core. Signed-off-by: Guennadi Liakhovetski Reviewed-by: Simon Horman Acked-by: Magnus Damm Signed-off-by: Rafael J. Wysocki --- arch/arm/mach-shmobile/board-ag5evm.c | 22 ++-------------------- 1 file changed, 2 insertions(+), 20 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-shmobile/board-ag5evm.c b/arch/arm/mach-shmobile/board-ag5evm.c index cb224a344af..0891ec6e27f 100644 --- a/arch/arm/mach-shmobile/board-ag5evm.c +++ b/arch/arm/mach-shmobile/board-ag5evm.c @@ -365,23 +365,13 @@ static struct platform_device mipidsi0_device = { }; /* SDHI0 */ -static irqreturn_t ag5evm_sdhi0_gpio_cd(int irq, void *arg) -{ - struct device *dev = arg; - struct sh_mobile_sdhi_info *info = dev->platform_data; - struct tmio_mmc_data *pdata = info->pdata; - - tmio_mmc_cd_wakeup(pdata); - - return IRQ_HANDLED; -} - static struct sh_mobile_sdhi_info sdhi0_info = { .dma_slave_tx = SHDMA_SLAVE_SDHI0_TX, .dma_slave_rx = SHDMA_SLAVE_SDHI0_RX, - .tmio_flags = TMIO_MMC_HAS_IDLE_WAIT, + .tmio_flags = TMIO_MMC_HAS_IDLE_WAIT | TMIO_MMC_USE_GPIO_CD, .tmio_caps = MMC_CAP_SD_HIGHSPEED, .tmio_ocr_mask = MMC_VDD_27_28 | MMC_VDD_28_29, + .cd_gpio = GPIO_PORT251, }; static struct resource sdhi0_resources[] = { @@ -557,7 +547,6 @@ static void __init ag5evm_init(void) lcd_backlight_reset(); /* enable SDHI0 on CN15 [SD I/F] */ - gpio_request(GPIO_FN_SDHICD0, NULL); gpio_request(GPIO_FN_SDHIWP0, NULL); gpio_request(GPIO_FN_SDHICMD0, NULL); gpio_request(GPIO_FN_SDHICLK0, NULL); @@ -566,13 +555,6 @@ static void __init ag5evm_init(void) gpio_request(GPIO_FN_SDHID0_1, NULL); gpio_request(GPIO_FN_SDHID0_0, NULL); - if (!request_irq(intcs_evt2irq(0x3c0), ag5evm_sdhi0_gpio_cd, - IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING, - "sdhi0 cd", &sdhi0_device.dev)) - sdhi0_info.tmio_flags |= TMIO_MMC_HAS_COLD_CD; - else - pr_warn("Unable to setup SDHI0 GPIO IRQ\n"); - /* enable SDHI1 on CN4 [WLAN I/F] */ gpio_request(GPIO_FN_SDHICLK1, NULL); gpio_request(GPIO_FN_SDHICMD1_PU, NULL); -- cgit v1.2.3-70-g09d2 From b759bd114e27fbb940fb44fd16552e8f4acd831e Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Thu, 10 May 2012 14:57:22 +0900 Subject: ARM / mach-shmobile: r8a7779 SMP TWD boot regression fix Fix SMP TWD boot regression on r8a7779 based platforms caused by: 4200b16 ARM: shmobile: convert to twd_local_timer_register() interface After the merge of the above commit it has been impossible to boot r8a7779 based SoCs with SMP enabled and CONFIG_HAVE_ARM_TWD=y. The kernel crashes at smp_init_cpus() timing which is before the console has been initialized, so to the user this looks like a kernel lock up without any particular error message. This patch fixes the regression on r8a7779 by moving the TWD registration code from smp_init_cpus() to sys_timer->init() time. Signed-off-by: Magnus Damm Acked-by: Marc Zyngier Signed-off-by: Rafael J. Wysocki --- arch/arm/mach-shmobile/include/mach/common.h | 1 + arch/arm/mach-shmobile/setup-r8a7779.c | 4 ++++ arch/arm/mach-shmobile/smp-r8a7779.c | 8 +++++++- 3 files changed, 12 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-shmobile/include/mach/common.h b/arch/arm/mach-shmobile/include/mach/common.h index 83ad3fe0a75..18ac8251a26 100644 --- a/arch/arm/mach-shmobile/include/mach/common.h +++ b/arch/arm/mach-shmobile/include/mach/common.h @@ -82,5 +82,6 @@ extern int r8a7779_platform_cpu_kill(unsigned int cpu); extern void r8a7779_secondary_init(unsigned int cpu); extern int r8a7779_boot_secondary(unsigned int cpu); extern void r8a7779_smp_prepare_cpus(void); +extern void r8a7779_register_twd(void); #endif /* __ARCH_MACH_COMMON_H */ diff --git a/arch/arm/mach-shmobile/setup-r8a7779.c b/arch/arm/mach-shmobile/setup-r8a7779.c index 12c6f529ab8..e98e46f6cf5 100644 --- a/arch/arm/mach-shmobile/setup-r8a7779.c +++ b/arch/arm/mach-shmobile/setup-r8a7779.c @@ -262,10 +262,14 @@ void __init r8a7779_add_standard_devices(void) ARRAY_SIZE(r8a7779_late_devices)); } +/* do nothing for !CONFIG_SMP or !CONFIG_HAVE_TWD */ +void __init __weak r8a7779_register_twd(void) { } + static void __init r8a7779_earlytimer_init(void) { r8a7779_clock_init(); shmobile_earlytimer_init(); + r8a7779_register_twd(); } void __init r8a7779_add_early_devices(void) diff --git a/arch/arm/mach-shmobile/smp-r8a7779.c b/arch/arm/mach-shmobile/smp-r8a7779.c index b62e19d4c9a..6d1d0238cbf 100644 --- a/arch/arm/mach-shmobile/smp-r8a7779.c +++ b/arch/arm/mach-shmobile/smp-r8a7779.c @@ -64,8 +64,15 @@ static void __iomem *scu_base_addr(void) static DEFINE_SPINLOCK(scu_lock); static unsigned long tmp; +#ifdef CONFIG_HAVE_ARM_TWD static DEFINE_TWD_LOCAL_TIMER(twd_local_timer, 0xf0000600, 29); +void __init r8a7779_register_twd(void) +{ + twd_local_timer_register(&twd_local_timer); +} +#endif + static void modify_scu_cpu_psr(unsigned long set, unsigned long clr) { void __iomem *scu_base = scu_base_addr(); @@ -84,7 +91,6 @@ unsigned int __init r8a7779_get_core_count(void) { void __iomem *scu_base = scu_base_addr(); - shmobile_twd_init(&twd_local_timer); return scu_get_core_count(scu_base); } -- cgit v1.2.3-70-g09d2 From d6720003c3732db891f6b5b10691a9c13ff6c46b Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Thu, 10 May 2012 00:26:58 -0700 Subject: ARM / mach-shmobile: sh73a0 SMP TWD boot regression fix Fix SMP TWD boot regression on sh73a0 based platforms caused by: 4200b16 ARM: shmobile: convert to twd_local_timer_register() interface After the merge of the above commit it has been impossible to boot sh73a0 based SoCs with SMP enabled and CONFIG_HAVE_ARM_TWD=y. The kernel crashes at smp_init_cpus() timing which is before the console has been initialized, so to the user this looks like a kernel lock up without any particular error message. This patch fixes the regression on sh73a0 by moving the TWD registration code from smp_init_cpus() to sys_timer->init() time. This patch removed shmobile_twd_init() which is no longer needed Signed-off-by: Kuninori Morimoto Signed-off-by: Magnus Damm Signed-off-by: Rafael J. Wysocki --- arch/arm/mach-shmobile/include/mach/common.h | 1 - arch/arm/mach-shmobile/setup-sh73a0.c | 4 ++++ arch/arm/mach-shmobile/smp-sh73a0.c | 7 ++++++- arch/arm/mach-shmobile/timer.c | 9 --------- 4 files changed, 10 insertions(+), 11 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-shmobile/include/mach/common.h b/arch/arm/mach-shmobile/include/mach/common.h index 18ac8251a26..c85e6ecda60 100644 --- a/arch/arm/mach-shmobile/include/mach/common.h +++ b/arch/arm/mach-shmobile/include/mach/common.h @@ -4,7 +4,6 @@ extern void shmobile_earlytimer_init(void); extern struct sys_timer shmobile_timer; struct twd_local_timer; -void shmobile_twd_init(struct twd_local_timer *twd_local_timer); extern void shmobile_setup_console(void); extern void shmobile_secondary_vector(void); extern int shmobile_platform_cpu_kill(unsigned int cpu); diff --git a/arch/arm/mach-shmobile/setup-sh73a0.c b/arch/arm/mach-shmobile/setup-sh73a0.c index 5bebffc1045..04a0dfe7549 100644 --- a/arch/arm/mach-shmobile/setup-sh73a0.c +++ b/arch/arm/mach-shmobile/setup-sh73a0.c @@ -688,10 +688,14 @@ void __init sh73a0_add_standard_devices(void) ARRAY_SIZE(sh73a0_late_devices)); } +/* do nothing for !CONFIG_SMP or !CONFIG_HAVE_TWD */ +void __init __weak sh73a0_register_twd(void) { } + static void __init sh73a0_earlytimer_init(void) { sh73a0_clock_init(); shmobile_earlytimer_init(); + sh73a0_register_twd(); } void __init sh73a0_add_early_devices(void) diff --git a/arch/arm/mach-shmobile/smp-sh73a0.c b/arch/arm/mach-shmobile/smp-sh73a0.c index 14ad8b052f1..e36c41c4ab4 100644 --- a/arch/arm/mach-shmobile/smp-sh73a0.c +++ b/arch/arm/mach-shmobile/smp-sh73a0.c @@ -42,7 +42,13 @@ static void __iomem *scu_base_addr(void) static DEFINE_SPINLOCK(scu_lock); static unsigned long tmp; +#ifdef CONFIG_HAVE_ARM_TWD static DEFINE_TWD_LOCAL_TIMER(twd_local_timer, 0xf0000600, 29); +void __init sh73a0_register_twd(void) +{ + twd_local_timer_register(&twd_local_timer); +} +#endif static void modify_scu_cpu_psr(unsigned long set, unsigned long clr) { @@ -62,7 +68,6 @@ unsigned int __init sh73a0_get_core_count(void) { void __iomem *scu_base = scu_base_addr(); - shmobile_twd_init(&twd_local_timer); return scu_get_core_count(scu_base); } diff --git a/arch/arm/mach-shmobile/timer.c b/arch/arm/mach-shmobile/timer.c index 2fba5f3d1c8..8b79e7917a2 100644 --- a/arch/arm/mach-shmobile/timer.c +++ b/arch/arm/mach-shmobile/timer.c @@ -46,15 +46,6 @@ static void __init shmobile_timer_init(void) { } -void __init shmobile_twd_init(struct twd_local_timer *twd_local_timer) -{ -#ifdef CONFIG_HAVE_ARM_TWD - int err = twd_local_timer_register(twd_local_timer); - if (err) - pr_err("twd_local_timer_register failed %d\n", err); -#endif -} - struct sys_timer shmobile_timer = { .init = shmobile_timer_init, }; -- cgit v1.2.3-70-g09d2 From e994d5eb7c3e45e13eb4fc882a47238f8dc4d63e Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Wed, 9 May 2012 16:24:59 +0900 Subject: ARM / mach-shmobile: Invalidate caches when booting secondary cores Make sure L1 caches are invalidated when booting secondary cores. Needed to boot all mach-shmobile SMP systems that are using Cortex-A9 including sh73a0, r8a7779 and EMEV2. Thanks to imx and tegra guys for actual code. Signed-off-by: Magnus Damm Tested-by: Kuninori Morimoto Signed-off-by: Rafael J. Wysocki --- arch/arm/mach-shmobile/headsmp.S | 56 +++++++++++++++++++++++++++++++++++++++- 1 file changed, 55 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-shmobile/headsmp.S b/arch/arm/mach-shmobile/headsmp.S index 6ac015c8920..b202c127252 100644 --- a/arch/arm/mach-shmobile/headsmp.S +++ b/arch/arm/mach-shmobile/headsmp.S @@ -16,6 +16,59 @@ __CPUINIT +/* Cache invalidation nicked from arch/arm/mach-imx/head-v7.S, thanks! + * + * The secondary kernel init calls v7_flush_dcache_all before it enables + * the L1; however, the L1 comes out of reset in an undefined state, so + * the clean + invalidate performed by v7_flush_dcache_all causes a bunch + * of cache lines with uninitialized data and uninitialized tags to get + * written out to memory, which does really unpleasant things to the main + * processor. We fix this by performing an invalidate, rather than a + * clean + invalidate, before jumping into the kernel. + * + * This funciton is cloned from arch/arm/mach-tegra/headsmp.S, and needs + * to be called for both secondary cores startup and primary core resume + * procedures. Ideally, it should be moved into arch/arm/mm/cache-v7.S. + */ +ENTRY(v7_invalidate_l1) + mov r0, #0 + mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache + mcr p15, 2, r0, c0, c0, 0 + mrc p15, 1, r0, c0, c0, 0 + + ldr r1, =0x7fff + and r2, r1, r0, lsr #13 + + ldr r1, =0x3ff + + and r3, r1, r0, lsr #3 @ NumWays - 1 + add r2, r2, #1 @ NumSets + + and r0, r0, #0x7 + add r0, r0, #4 @ SetShift + + clz r1, r3 @ WayShift + add r4, r3, #1 @ NumWays +1: sub r2, r2, #1 @ NumSets-- + mov r3, r4 @ Temp = NumWays +2: subs r3, r3, #1 @ Temp-- + mov r5, r3, lsl r1 + mov r6, r2, lsl r0 + orr r5, r5, r6 @ Reg = (Temp< Date: Sat, 12 May 2012 06:17:59 +0900 Subject: ARM: EXYNOS: use s5p-timer for UniversalC210 board Commit 069d4e743 ("ARM: EXYNOS4: Remove clock event timers using ARM private timers") removed support for local timers and forced to use MCT as event source. However MCT is not operating properly on early revision of EXYNOS4 SoCs. All UniversalC210 boards are based on it, so that commit broke support for it. This patch provides a workaround that enables UniversalC210 boards to boot again. s5p-timer is used as an event source, it works only for non-SMP builds. Signed-off-by: Marek Szyprowski Signed-off-by: Kyungmin Park Signed-off-by: Kukjin Kim --- arch/arm/mach-exynos/Kconfig | 3 +++ arch/arm/mach-exynos/mach-universal_c210.c | 4 +++- 2 files changed, 6 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig index e81c35f936b..b8df521fb68 100644 --- a/arch/arm/mach-exynos/Kconfig +++ b/arch/arm/mach-exynos/Kconfig @@ -232,6 +232,9 @@ config MACH_ARMLEX4210 config MACH_UNIVERSAL_C210 bool "Mobile UNIVERSAL_C210 Board" select CPU_EXYNOS4210 + select S5P_HRT + select CLKSRC_MMIO + select HAVE_SCHED_CLOCK select S5P_GPIO_INT select S5P_DEV_FIMC0 select S5P_DEV_FIMC1 diff --git a/arch/arm/mach-exynos/mach-universal_c210.c b/arch/arm/mach-exynos/mach-universal_c210.c index cb2b027f09a..a34036eb8ba 100644 --- a/arch/arm/mach-exynos/mach-universal_c210.c +++ b/arch/arm/mach-exynos/mach-universal_c210.c @@ -40,6 +40,7 @@ #include #include #include +#include #include #include @@ -1063,6 +1064,7 @@ static void __init universal_map_io(void) exynos_init_io(NULL, 0); s3c24xx_init_clocks(24000000); s3c24xx_init_uarts(universal_uartcfgs, ARRAY_SIZE(universal_uartcfgs)); + s5p_set_timer_source(S5P_PWM2, S5P_PWM4); } static void s5p_tv_setup(void) @@ -1113,7 +1115,7 @@ MACHINE_START(UNIVERSAL_C210, "UNIVERSAL_C210") .map_io = universal_map_io, .handle_irq = gic_handle_irq, .init_machine = universal_machine_init, - .timer = &exynos4_timer, + .timer = &s5p_timer, .reserve = &universal_reserve, .restart = exynos4_restart, MACHINE_END -- cgit v1.2.3-70-g09d2 From 28b874a8ba7aed5152dc426dde38239ce23d8b37 Mon Sep 17 00:00:00 2001 From: Kukjin Kim Date: Sat, 12 May 2012 16:45:47 +0900 Subject: ARM: EXYNOS: fix ctrlbit for exynos5_clk_pdma1 It should be (1 << 2) for ctrlbit of exynos5_clk_pdma1. Signed-off-by: Kukjin Kim --- arch/arm/mach-exynos/clock-exynos5.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-exynos/clock-exynos5.c b/arch/arm/mach-exynos/clock-exynos5.c index 5cd7a8b8868..7ac6ff4c46b 100644 --- a/arch/arm/mach-exynos/clock-exynos5.c +++ b/arch/arm/mach-exynos/clock-exynos5.c @@ -678,7 +678,7 @@ static struct clk exynos5_clk_pdma1 = { .name = "dma", .devname = "dma-pl330.1", .enable = exynos5_clk_ip_fsys_ctrl, - .ctrlbit = (1 << 1), + .ctrlbit = (1 << 2), }; static struct clk exynos5_clk_mdma1 = { -- cgit v1.2.3-70-g09d2 From 8ea2d9e7de03d147d0bd0ac684fef00e469705e0 Mon Sep 17 00:00:00 2001 From: Lukasz Majewski Date: Sun, 13 May 2012 08:28:28 +0900 Subject: ARM: EXYNOS: Add usb otg phy control for EXYNOS4210 This patch supports to control usb otg phy of EXYNOS4210. Signed-off-by: Joonyoung Shim Signed-off-by: Kyungmin Park [Rebased on the newest git/kgene/linux-samsung #for-next] Signed-off-by: Lukasz Majewski [kgene.kim@samsung.com: squashed 2 patches together] Signed-off-by: Kukjin Kim --- arch/arm/mach-exynos/include/mach/irqs.h | 1 + arch/arm/mach-exynos/include/mach/map.h | 4 ++ arch/arm/mach-exynos/include/mach/regs-pmu.h | 3 + arch/arm/mach-exynos/setup-usb-phy.c | 100 +++++++++++++++++++-------- 4 files changed, 80 insertions(+), 28 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-exynos/include/mach/irqs.h b/arch/arm/mach-exynos/include/mach/irqs.h index 591e78521a9..c02dae7bf4a 100644 --- a/arch/arm/mach-exynos/include/mach/irqs.h +++ b/arch/arm/mach-exynos/include/mach/irqs.h @@ -189,6 +189,7 @@ #define IRQ_IIC7 EXYNOS4_IRQ_IIC7 #define IRQ_USB_HOST EXYNOS4_IRQ_USB_HOST +#define IRQ_OTG EXYNOS4_IRQ_USB_HSOTG #define IRQ_HSMMC0 EXYNOS4_IRQ_HSMMC0 #define IRQ_HSMMC1 EXYNOS4_IRQ_HSMMC1 diff --git a/arch/arm/mach-exynos/include/mach/map.h b/arch/arm/mach-exynos/include/mach/map.h index 6e6d11ff352..e009a66477f 100644 --- a/arch/arm/mach-exynos/include/mach/map.h +++ b/arch/arm/mach-exynos/include/mach/map.h @@ -130,6 +130,9 @@ #define EXYNOS4_PA_HSMMC(x) (0x12510000 + ((x) * 0x10000)) #define EXYNOS4_PA_DWMCI 0x12550000 +#define EXYNOS4_PA_HSOTG 0x12480000 +#define EXYNOS4_PA_USB_HSPHY 0x125B0000 + #define EXYNOS4_PA_SATA 0x12560000 #define EXYNOS4_PA_SATAPHY 0x125D0000 #define EXYNOS4_PA_SATAPHY_CTRL 0x126B0000 @@ -186,6 +189,7 @@ #define S3C_PA_SPI0 EXYNOS4_PA_SPI0 #define S3C_PA_SPI1 EXYNOS4_PA_SPI1 #define S3C_PA_SPI2 EXYNOS4_PA_SPI2 +#define S3C_PA_USB_HSOTG EXYNOS4_PA_HSOTG #define S5P_PA_EHCI EXYNOS4_PA_EHCI #define S5P_PA_FIMC0 EXYNOS4_PA_FIMC0 diff --git a/arch/arm/mach-exynos/include/mach/regs-pmu.h b/arch/arm/mach-exynos/include/mach/regs-pmu.h index 4c53f38b5a9..d457d052a42 100644 --- a/arch/arm/mach-exynos/include/mach/regs-pmu.h +++ b/arch/arm/mach-exynos/include/mach/regs-pmu.h @@ -163,6 +163,9 @@ #define S5P_CHECK_SLEEP 0x00000BAD /* Only for EXYNOS4210 */ +#define S5P_USBDEVICE_PHY_CONTROL S5P_PMUREG(0x0704) +#define S5P_USBDEVICE_PHY_ENABLE (1 << 0) + #define S5P_USBHOST_PHY_CONTROL S5P_PMUREG(0x0708) #define S5P_USBHOST_PHY_ENABLE (1 << 0) diff --git a/arch/arm/mach-exynos/setup-usb-phy.c b/arch/arm/mach-exynos/setup-usb-phy.c index 41743d21e8c..1af0a7f44e0 100644 --- a/arch/arm/mach-exynos/setup-usb-phy.c +++ b/arch/arm/mach-exynos/setup-usb-phy.c @@ -26,11 +26,71 @@ static int exynos4_usb_host_phy_is_on(void) return (readl(EXYNOS4_PHYPWR) & PHY1_STD_ANALOG_POWERDOWN) ? 0 : 1; } -static int exynos4_usb_phy1_init(struct platform_device *pdev) +static void exynos4210_usb_phy_clkset(struct platform_device *pdev) { - struct clk *otg_clk; struct clk *xusbxti_clk; u32 phyclk; + + /* set clock frequency for PLL */ + phyclk = readl(EXYNOS4_PHYCLK) & ~CLKSEL_MASK; + + xusbxti_clk = clk_get(&pdev->dev, "xusbxti"); + if (xusbxti_clk && !IS_ERR(xusbxti_clk)) { + switch (clk_get_rate(xusbxti_clk)) { + case 12 * MHZ: + phyclk |= CLKSEL_12M; + break; + case 24 * MHZ: + phyclk |= CLKSEL_24M; + break; + default: + case 48 * MHZ: + /* default reference clock */ + break; + } + clk_put(xusbxti_clk); + } + + writel(phyclk, EXYNOS4_PHYCLK); +} + +static int exynos4210_usb_phy0_init(struct platform_device *pdev) +{ + u32 rstcon; + + writel(readl(S5P_USBDEVICE_PHY_CONTROL) | S5P_USBDEVICE_PHY_ENABLE, + S5P_USBDEVICE_PHY_CONTROL); + + exynos4210_usb_phy_clkset(pdev); + + /* set to normal PHY0 */ + writel((readl(EXYNOS4_PHYPWR) & ~PHY0_NORMAL_MASK), EXYNOS4_PHYPWR); + + /* reset PHY0 and Link */ + rstcon = readl(EXYNOS4_RSTCON) | PHY0_SWRST_MASK; + writel(rstcon, EXYNOS4_RSTCON); + udelay(10); + + rstcon &= ~PHY0_SWRST_MASK; + writel(rstcon, EXYNOS4_RSTCON); + + return 0; +} + +static int exynos4210_usb_phy0_exit(struct platform_device *pdev) +{ + writel((readl(EXYNOS4_PHYPWR) | PHY0_ANALOG_POWERDOWN | + PHY0_OTG_DISABLE), EXYNOS4_PHYPWR); + + writel(readl(S5P_USBDEVICE_PHY_CONTROL) & ~S5P_USBDEVICE_PHY_ENABLE, + S5P_USBDEVICE_PHY_CONTROL); + + return 0; +} + +static int exynos4210_usb_phy1_init(struct platform_device *pdev) +{ + struct clk *otg_clk; u32 rstcon; int err; @@ -54,27 +114,7 @@ static int exynos4_usb_phy1_init(struct platform_device *pdev) writel(readl(S5P_USBHOST_PHY_CONTROL) | S5P_USBHOST_PHY_ENABLE, S5P_USBHOST_PHY_CONTROL); - /* set clock frequency for PLL */ - phyclk = readl(EXYNOS4_PHYCLK) & ~CLKSEL_MASK; - - xusbxti_clk = clk_get(&pdev->dev, "xusbxti"); - if (xusbxti_clk && !IS_ERR(xusbxti_clk)) { - switch (clk_get_rate(xusbxti_clk)) { - case 12 * MHZ: - phyclk |= CLKSEL_12M; - break; - case 24 * MHZ: - phyclk |= CLKSEL_24M; - break; - default: - case 48 * MHZ: - /* default reference clock */ - break; - } - clk_put(xusbxti_clk); - } - - writel(phyclk, EXYNOS4_PHYCLK); + exynos4210_usb_phy_clkset(pdev); /* floating prevention logic: disable */ writel((readl(EXYNOS4_PHY1CON) | FPENABLEN), EXYNOS4_PHY1CON); @@ -102,7 +142,7 @@ static int exynos4_usb_phy1_init(struct platform_device *pdev) return 0; } -static int exynos4_usb_phy1_exit(struct platform_device *pdev) +static int exynos4210_usb_phy1_exit(struct platform_device *pdev) { struct clk *otg_clk; int err; @@ -136,16 +176,20 @@ static int exynos4_usb_phy1_exit(struct platform_device *pdev) int s5p_usb_phy_init(struct platform_device *pdev, int type) { - if (type == S5P_USB_PHY_HOST) - return exynos4_usb_phy1_init(pdev); + if (type == S5P_USB_PHY_DEVICE) + return exynos4210_usb_phy0_init(pdev); + else if (type == S5P_USB_PHY_HOST) + return exynos4210_usb_phy1_init(pdev); return -EINVAL; } int s5p_usb_phy_exit(struct platform_device *pdev, int type) { - if (type == S5P_USB_PHY_HOST) - return exynos4_usb_phy1_exit(pdev); + if (type == S5P_USB_PHY_DEVICE) + return exynos4210_usb_phy0_exit(pdev); + else if (type == S5P_USB_PHY_HOST) + return exynos4210_usb_phy1_exit(pdev); return -EINVAL; } -- cgit v1.2.3-70-g09d2 From 460dcb0220c369921fb55eccc70ea8d8f8bb3ba3 Mon Sep 17 00:00:00 2001 From: Lukasz Majewski Date: Sun, 13 May 2012 08:24:14 +0900 Subject: ARM: EXYNOS: Add s3c-hsotg device support for GONI board This patch adds hsotg device to the GONI board. Signed-off-by: Lukasz Majewski Signed-off-by: Kyungmin Park Signed-off-by: Kukjin Kim --- arch/arm/mach-s5pv210/Kconfig | 1 + arch/arm/mach-s5pv210/mach-goni.c | 5 +++++ 2 files changed, 6 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-s5pv210/Kconfig b/arch/arm/mach-s5pv210/Kconfig index 29594fc4fdf..88e983b0c82 100644 --- a/arch/arm/mach-s5pv210/Kconfig +++ b/arch/arm/mach-s5pv210/Kconfig @@ -85,6 +85,7 @@ config MACH_AQUILA select S5P_DEV_ONENAND select S5PV210_SETUP_FB_24BPP select S5PV210_SETUP_SDHCI + select S5PV210_SETUP_USB_PHY help Machine support for the Samsung Aquila target based on S5PC110 SoC diff --git a/arch/arm/mach-s5pv210/mach-goni.c b/arch/arm/mach-s5pv210/mach-goni.c index 32395664e87..5fac4e4a93f 100644 --- a/arch/arm/mach-s5pv210/mach-goni.c +++ b/arch/arm/mach-s5pv210/mach-goni.c @@ -278,6 +278,9 @@ static void __init goni_tsp_init(void) i2c2_devs[0].irq = gpio_to_irq(gpio); } +/* USB OTG */ +static struct s3c_hsotg_plat goni_hsotg_pdata; + static void goni_camera_init(void) { s5pv210_fimc_setup_gpio(S5P_CAMPORT_A); @@ -941,6 +944,8 @@ static void __init goni_machine_init(void) s3c_set_platdata(&goni_fimc_md_platdata, sizeof(goni_fimc_md_platdata), &s5p_device_fimc_md); + s3c_hsotg_set_platdata(&goni_hsotg_pdata); + goni_camera_init(); /* SPI */ -- cgit v1.2.3-70-g09d2 From 8d07dbb9e862832a6ecd4dfd98aa9e74aedc6159 Mon Sep 17 00:00:00 2001 From: Joonyoung Shim Date: Sun, 13 May 2012 08:25:24 +0900 Subject: ARM: EXYNOS: Add s3c-hsotg device support for NURI board This patch adds hsotg device to the NURI board. Signed-off-by: Joonyoung Shim Signed-off-by: Kyungmin Park [Rebased on the newest git/kgene/linux-samsung #for-next] Signed-off-by: Lukasz Majewski Signed-off-by: Kukjin Kim --- arch/arm/mach-exynos/Kconfig | 1 + arch/arm/mach-exynos/mach-nuri.c | 9 ++++++++- 2 files changed, 9 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig index b8df521fb68..cbe0dad6c05 100644 --- a/arch/arm/mach-exynos/Kconfig +++ b/arch/arm/mach-exynos/Kconfig @@ -280,6 +280,7 @@ config MACH_NURI select S3C_DEV_I2C3 select S3C_DEV_I2C5 select S3C_DEV_I2C6 + select S3C_DEV_USB_HSOTG select S5P_DEV_CSIS0 select S5P_DEV_JPEG select S5P_DEV_FIMC0 diff --git a/arch/arm/mach-exynos/mach-nuri.c b/arch/arm/mach-exynos/mach-nuri.c index ed90aef404c..f74c3b75da6 100644 --- a/arch/arm/mach-exynos/mach-nuri.c +++ b/arch/arm/mach-exynos/mach-nuri.c @@ -351,6 +351,7 @@ static struct regulator_consumer_supply __initdata max8997_ldo1_[] = { REGULATOR_SUPPLY("vdd", "s5p-adc"), /* Used by CPU's ADC drv */ }; static struct regulator_consumer_supply __initdata max8997_ldo3_[] = { + REGULATOR_SUPPLY("vusb_d", "s3c-hsotg"), /* USB */ REGULATOR_SUPPLY("vdd11", "s5p-mipi-csis.0"), /* MIPI */ }; static struct regulator_consumer_supply __initdata max8997_ldo4_[] = { @@ -366,7 +367,7 @@ static struct regulator_consumer_supply __initdata max8997_ldo7_[] = { REGULATOR_SUPPLY("dig_18", "0-001f"), /* HCD803 */ }; static struct regulator_consumer_supply __initdata max8997_ldo8_[] = { - REGULATOR_SUPPLY("vusb_d", NULL), /* Used by CPU */ + REGULATOR_SUPPLY("vusb_a", "s3c-hsotg"), /* USB */ REGULATOR_SUPPLY("vdac", NULL), /* Used by CPU */ }; static struct regulator_consumer_supply __initdata max8997_ldo11_[] = { @@ -822,6 +823,7 @@ static struct regulator_init_data __initdata max8997_esafeout1_data = { .constraints = { .name = "SAFEOUT1", .valid_ops_mask = REGULATOR_CHANGE_STATUS, + .always_on = 1, .state_mem = { .disabled = 1, }, @@ -1079,6 +1081,9 @@ static void __init nuri_ehci_init(void) s5p_ehci_set_platdata(pdata); } +/* USB OTG */ +static struct s3c_hsotg_plat nuri_hsotg_pdata; + /* CAMERA */ static struct regulator_consumer_supply cam_vt_cam15_supply = REGULATOR_SUPPLY("vdd_core", "6-003c"); @@ -1291,6 +1296,7 @@ static struct platform_device *nuri_devices[] __initdata = { &s5p_device_mfc_l, &s5p_device_mfc_r, &s5p_device_fimc_md, + &s3c_device_usb_hsotg, /* NURI Devices */ &nuri_gpio_keys, @@ -1339,6 +1345,7 @@ static void __init nuri_machine_init(void) nuri_camera_init(); nuri_ehci_init(); + s3c_hsotg_set_platdata(&nuri_hsotg_pdata); /* Last */ platform_add_devices(nuri_devices, ARRAY_SIZE(nuri_devices)); -- cgit v1.2.3-70-g09d2 From 3a36dd068f4308461661d28e8e14e11e426eba6b Mon Sep 17 00:00:00 2001 From: Lukasz Majewski Date: Sun, 13 May 2012 08:27:33 +0900 Subject: ARM: EXYNOS: Add s3c-hsotg device support for Universal C210 board This patch adds platform data for using S3C-HSOTG driver at Universal_C210 target. Signed-off-by: Lukasz Majewski Signed-off-by: Kyungmin Park Signed-off-by: Kukjin Kim --- arch/arm/mach-exynos/Kconfig | 2 ++ arch/arm/mach-exynos/mach-universal_c210.c | 10 ++++++++++ 2 files changed, 12 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig index cbe0dad6c05..a6a6a9417a0 100644 --- a/arch/arm/mach-exynos/Kconfig +++ b/arch/arm/mach-exynos/Kconfig @@ -250,6 +250,7 @@ config MACH_UNIVERSAL_C210 select S3C_DEV_I2C1 select S3C_DEV_I2C3 select S3C_DEV_I2C5 + select S3C_DEV_USB_HSOTG select S5P_DEV_I2C_HDMIPHY select S5P_DEV_MFC select S5P_DEV_ONENAND @@ -262,6 +263,7 @@ config MACH_UNIVERSAL_C210 select EXYNOS4_SETUP_SDHCI select EXYNOS4_SETUP_FIMC select S5P_SETUP_MIPIPHY + select EXYNOS4_SETUP_USB_PHY help Machine support for Samsung Mobile Universal S5PC210 Reference Board. diff --git a/arch/arm/mach-exynos/mach-universal_c210.c b/arch/arm/mach-exynos/mach-universal_c210.c index a34036eb8ba..620f05341eb 100644 --- a/arch/arm/mach-exynos/mach-universal_c210.c +++ b/arch/arm/mach-exynos/mach-universal_c210.c @@ -205,6 +205,7 @@ static struct regulator_init_data lp3974_ldo2_data = { }; static struct regulator_consumer_supply lp3974_ldo3_consumer[] = { + REGULATOR_SUPPLY("vusb_a", "s3c-hsotg"), REGULATOR_SUPPLY("vdd", "exynos4-hdmi"), REGULATOR_SUPPLY("vdd_pll", "exynos4-hdmi"), REGULATOR_SUPPLY("vdd11", "s5p-mipi-csis.0"), @@ -290,6 +291,7 @@ static struct regulator_init_data lp3974_ldo7_data = { }; static struct regulator_consumer_supply lp3974_ldo8_consumer[] = { + REGULATOR_SUPPLY("vusb_d", "s3c-hsotg"), REGULATOR_SUPPLY("vdd33a_dac", "s5p-sdo"), }; @@ -486,7 +488,10 @@ static struct regulator_init_data lp3974_vichg_data = { static struct regulator_init_data lp3974_esafeout1_data = { .constraints = { .name = "SAFEOUT1", + .min_uV = 4800000, + .max_uV = 4800000, .valid_ops_mask = REGULATOR_CHANGE_STATUS, + .always_on = 1, .state_mem = { .enabled = 1, }, @@ -994,6 +999,9 @@ static struct gpio universal_camera_gpios[] = { { GPIO_CAM_VGA_NSTBY, GPIOF_OUT_INIT_LOW, "CAM_VGA_NSTBY" }, }; +/* USB OTG */ +static struct s3c_hsotg_plat universal_hsotg_pdata; + static void __init universal_camera_init(void) { s3c_set_platdata(&mipi_csis_platdata, sizeof(mipi_csis_platdata), @@ -1049,6 +1057,7 @@ static struct platform_device *universal_devices[] __initdata = { &s5p_device_onenand, &s5p_device_fimd0, &s5p_device_jpeg, + &s3c_device_usb_hsotg, &s5p_device_mfc, &s5p_device_mfc_l, &s5p_device_mfc_r, @@ -1102,6 +1111,7 @@ static void __init universal_machine_init(void) i2c_register_board_info(I2C_GPIO_BUS_12, i2c_gpio12_devs, ARRAY_SIZE(i2c_gpio12_devs)); + s3c_hsotg_set_platdata(&universal_hsotg_pdata); universal_camera_init(); /* Last */ -- cgit v1.2.3-70-g09d2