From 44c09201a4178e08ed1c8cc37e7aea0683888f0a Mon Sep 17 00:00:00 2001 From: Matt LaPlante Date: Tue, 3 Oct 2006 22:34:14 +0200 Subject: more misc typo fixes Signed-off-by: Adrian Bunk --- arch/cris/arch-v10/drivers/Kconfig | 4 ++-- arch/cris/arch-v32/Kconfig | 2 +- arch/m68knommu/Kconfig | 4 ++-- arch/um/Kconfig | 2 +- arch/x86_64/Kconfig | 2 +- 5 files changed, 7 insertions(+), 7 deletions(-) (limited to 'arch') diff --git a/arch/cris/arch-v10/drivers/Kconfig b/arch/cris/arch-v10/drivers/Kconfig index 8b50e840295..734d5f3a530 100644 --- a/arch/cris/arch-v10/drivers/Kconfig +++ b/arch/cris/arch-v10/drivers/Kconfig @@ -550,7 +550,7 @@ config ETRAX_IDE select BLK_DEV_IDEDMA help Enable this to get support for ATA/IDE. - You can't use paralell ports or SCSI ports + You can't use parallel ports or SCSI ports at the same time. @@ -744,7 +744,7 @@ config ETRAX_PA_CHANGEABLE_BITS default "FF" help This is a bitmask with information of what bits in PA that a user - can change change the value on using ioctl's. + can change the value on using ioctl's. Bit set = changeable. You probably want 00 here. diff --git a/arch/cris/arch-v32/Kconfig b/arch/cris/arch-v32/Kconfig index 22f0ddc04c5..4f79d8ed3e1 100644 --- a/arch/cris/arch-v32/Kconfig +++ b/arch/cris/arch-v32/Kconfig @@ -162,7 +162,7 @@ config ETRAX_SDRAM_GRP1_CONFIG depends on ETRAX_ARCH_V32 default "0" help - SDRAM configuration for group 1. The defult value is 0 + SDRAM configuration for group 1. The default value is 0 because group 1 is not used in the default configuration, described in the help for SDRAM_GRP0_CONFIG. diff --git a/arch/m68knommu/Kconfig b/arch/m68knommu/Kconfig index b7c942cf774..6d920d4bdc3 100644 --- a/arch/m68knommu/Kconfig +++ b/arch/m68knommu/Kconfig @@ -161,8 +161,8 @@ config CLOCK_FREQ frequency, it may or may not be the same as the external clock crystal fitted to your board. Some processors have an internal PLL and can have their frequency programmed at run time, others - use internal dividers. In gernal the kernel won't setup a PLL - if it is fitted (there are some expections). This value will be + use internal dividers. In general the kernel won't setup a PLL + if it is fitted (there are some exceptions). This value will be specific to the exact CPU that you are using. config CLOCK_DIV diff --git a/arch/um/Kconfig b/arch/um/Kconfig index 76e85bbaea5..d75307589d7 100644 --- a/arch/um/Kconfig +++ b/arch/um/Kconfig @@ -257,7 +257,7 @@ config UML_REAL_TIME_CLOCK UML and spend long times with UML stopped at a breakpoint. In this case, when UML is restarted, it will call the timer enough times to make up for the time spent at the breakpoint. This could result in a - noticable lag. If this is a problem, then disable this option. + noticeable lag. If this is a problem, then disable this option. endmenu diff --git a/arch/x86_64/Kconfig b/arch/x86_64/Kconfig index 0a5d8e659aa..010d2265f1c 100644 --- a/arch/x86_64/Kconfig +++ b/arch/x86_64/Kconfig @@ -310,7 +310,7 @@ config K8_NUMA help Enable K8 NUMA node topology detection. You should say Y here if you have a multi processor AMD K8 system. This uses an old - method to read the NUMA configurtion directly from the builtin + method to read the NUMA configuration directly from the builtin Northbridge of Opteron. It is recommended to use X86_64_ACPI_NUMA instead, which also takes priority if both are compiled in. -- cgit v1.2.3-70-g09d2