From 564889c1c02698d66db76764ee4e0a5e86903971 Mon Sep 17 00:00:00 2001 From: Paul Walmsley Date: Mon, 26 Jul 2010 16:34:34 -0600 Subject: OMAP: PM constraints: add return values; add requesting device param to omap_pm_set_max_dev_wakeup_lat() Add return values to the PM constraint functions. This allows the PM core to provide feedback to the caller if a constraint is not possible. Update the one upstream user of omap_pm_set_max_mpu_wakeup_lat() to add a compatibility wrapper, needed until the driver is changed. Update some of the documentation to conform more closely to kerneldoc style. Add an additional device parameter to omap_pm_set_max_dev_wakeup_lat() to identify the device requesting the constraint. This is so repeated calls to omap_pm_set_max_dev_wakeup_lat() with the same requesting device can override the device's previously-set constraint. Also, it allows the PM core to make a decision as to whether or not the constraint should be satisfied, based on the caller's identity. Signed-off-by: Paul Walmsley --- arch/arm/plat-omap/i2c.c | 12 +++++- arch/arm/plat-omap/include/plat/omap-pm.h | 69 +++++++++++++++++-------------- arch/arm/plat-omap/omap-pm-noop.c | 34 +++++++++------ 3 files changed, 71 insertions(+), 44 deletions(-) (limited to 'arch') diff --git a/arch/arm/plat-omap/i2c.c b/arch/arm/plat-omap/i2c.c index eec2b4993c6..a5ce4f0aad3 100644 --- a/arch/arm/plat-omap/i2c.c +++ b/arch/arm/plat-omap/i2c.c @@ -138,6 +138,16 @@ static inline int omap1_i2c_add_bus(struct platform_device *pdev, int bus_id) return platform_device_register(pdev); } +/* + * XXX This function is a temporary compatibility wrapper - only + * needed until the I2C driver can be converted to call + * omap_pm_set_max_dev_wakeup_lat() and handle a return code. + */ +static void omap_pm_set_max_mpu_wakeup_lat_compat(struct device *dev, long t) +{ + omap_pm_set_max_mpu_wakeup_lat(dev, t); +} + static inline int omap2_i2c_add_bus(struct platform_device *pdev, int bus_id) { struct resource *res; @@ -168,7 +178,7 @@ static inline int omap2_i2c_add_bus(struct platform_device *pdev, int bus_id) struct omap_i2c_bus_platform_data *pd; pd = pdev->dev.platform_data; - pd->set_mpu_wkup_lat = omap_pm_set_max_mpu_wakeup_lat; + pd->set_mpu_wkup_lat = omap_pm_set_max_mpu_wakeup_lat_compat; } return platform_device_register(pdev); diff --git a/arch/arm/plat-omap/include/plat/omap-pm.h b/arch/arm/plat-omap/include/plat/omap-pm.h index 3ee41d71149..3d468bafe91 100644 --- a/arch/arm/plat-omap/include/plat/omap-pm.h +++ b/arch/arm/plat-omap/include/plat/omap-pm.h @@ -1,8 +1,8 @@ /* * omap-pm.h - OMAP power management interface * - * Copyright (C) 2008-2009 Texas Instruments, Inc. - * Copyright (C) 2008-2009 Nokia Corporation + * Copyright (C) 2008-2010 Texas Instruments, Inc. + * Copyright (C) 2008-2010 Nokia Corporation * Paul Walmsley * * Interface developed by (in alphabetical order): Karthik Dasu, Jouni @@ -89,7 +89,7 @@ void omap_pm_if_exit(void); * @t: maximum MPU wakeup latency in microseconds * * Request that the maximum interrupt latency for the MPU to be no - * greater than 't' microseconds. "Interrupt latency" in this case is + * greater than @t microseconds. "Interrupt latency" in this case is * defined as the elapsed time from the occurrence of a hardware or * timer interrupt to the time when the device driver's interrupt * service routine has been entered by the MPU. @@ -105,15 +105,19 @@ void omap_pm_if_exit(void); * elapsed from when a device driver enables a hardware device with * clk_enable(), to when the device is ready for register access or * other use. To control this device wakeup latency, use - * set_max_dev_wakeup_lat() + * omap_pm_set_max_dev_wakeup_lat() * - * Multiple calls to set_max_mpu_wakeup_lat() will replace the + * Multiple calls to omap_pm_set_max_mpu_wakeup_lat() will replace the * previous t value. To remove the latency target for the MPU, call * with t = -1. * - * No return value. + * XXX This constraint will be deprecated soon in favor of the more + * general omap_pm_set_max_dev_wakeup_lat() + * + * Returns -EINVAL for an invalid argument, -ERANGE if the constraint + * is not satisfiable, or 0 upon success. */ -void omap_pm_set_max_mpu_wakeup_lat(struct device *dev, long t); +int omap_pm_set_max_mpu_wakeup_lat(struct device *dev, long t); /** @@ -123,8 +127,8 @@ void omap_pm_set_max_mpu_wakeup_lat(struct device *dev, long t); * @r: minimum throughput (in KiB/s) * * Request that the minimum data throughput on the OCP interconnect - * attached to device 'dev' interconnect agent 'tbus_id' be no less - * than 'r' KiB/s. + * attached to device @dev interconnect agent @tbus_id be no less + * than @r KiB/s. * * It is expected that the OMAP PM or bus code will use this * information to set the interconnect clock to run at the lowest @@ -138,40 +142,44 @@ void omap_pm_set_max_mpu_wakeup_lat(struct device *dev, long t); * code will also need to add an minimum L3 interconnect speed * constraint, * - * Multiple calls to set_min_bus_tput() will replace the previous rate - * value for this device. To remove the interconnect throughput - * restriction for this device, call with r = 0. + * Multiple calls to omap_pm_set_min_bus_tput() will replace the + * previous rate value for this device. To remove the interconnect + * throughput restriction for this device, call with r = 0. * - * No return value. + * Returns -EINVAL for an invalid argument, -ERANGE if the constraint + * is not satisfiable, or 0 upon success. */ -void omap_pm_set_min_bus_tput(struct device *dev, u8 agent_id, unsigned long r); +int omap_pm_set_min_bus_tput(struct device *dev, u8 agent_id, unsigned long r); /** * omap_pm_set_max_dev_wakeup_lat - set the maximum device enable latency - * @dev: struct device * + * @req_dev: struct device * requesting the constraint, or NULL if none + * @dev: struct device * to set the constraint one * @t: maximum device wakeup latency in microseconds * - * Request that the maximum amount of time necessary for a device to - * become accessible after its clocks are enabled should be no greater - * than 't' microseconds. Specifically, this represents the time from - * when a device driver enables device clocks with clk_enable(), to - * when the register reads and writes on the device will succeed. - * This function should be called before clk_disable() is called, - * since the power state transition decision may be made during - * clk_disable(). + * Request that the maximum amount of time necessary for a device @dev + * to become accessible after its clocks are enabled should be no + * greater than @t microseconds. Specifically, this represents the + * time from when a device driver enables device clocks with + * clk_enable(), to when the register reads and writes on the device + * will succeed. This function should be called before clk_disable() + * is called, since the power state transition decision may be made + * during clk_disable(). * * It is intended that underlying PM code will use this information to * determine what power state to put the powerdomain enclosing this * device into. * - * Multiple calls to set_max_dev_wakeup_lat() will replace the - * previous wakeup latency values for this device. To remove the wakeup - * latency restriction for this device, call with t = -1. + * Multiple calls to omap_pm_set_max_dev_wakeup_lat() will replace the + * previous wakeup latency values for this device. To remove the + * wakeup latency restriction for this device, call with t = -1. * - * No return value. + * Returns -EINVAL for an invalid argument, -ERANGE if the constraint + * is not satisfiable, or 0 upon success. */ -void omap_pm_set_max_dev_wakeup_lat(struct device *dev, long t); +int omap_pm_set_max_dev_wakeup_lat(struct device *req_dev, struct device *dev, + long t); /** @@ -198,9 +206,10 @@ void omap_pm_set_max_dev_wakeup_lat(struct device *dev, long t); * value for this device. To remove the maximum DMA latency for this * device, call with t = -1. * - * No return value. + * Returns -EINVAL for an invalid argument, -ERANGE if the constraint + * is not satisfiable, or 0 upon success. */ -void omap_pm_set_max_sdma_lat(struct device *dev, long t); +int omap_pm_set_max_sdma_lat(struct device *dev, long t); /* diff --git a/arch/arm/plat-omap/omap-pm-noop.c b/arch/arm/plat-omap/omap-pm-noop.c index 186bca82cfa..b0414f90c6e 100644 --- a/arch/arm/plat-omap/omap-pm-noop.c +++ b/arch/arm/plat-omap/omap-pm-noop.c @@ -34,11 +34,11 @@ struct omap_opp *l3_opps; * Device-driver-originated constraints (via board-*.c files) */ -void omap_pm_set_max_mpu_wakeup_lat(struct device *dev, long t) +int omap_pm_set_max_mpu_wakeup_lat(struct device *dev, long t) { if (!dev || t < -1) { - WARN_ON(1); - return; + WARN(1, "OMAP PM: %s: invalid parameter(s)", __func__); + return -EINVAL; }; if (t == -1) @@ -58,14 +58,16 @@ void omap_pm_set_max_mpu_wakeup_lat(struct device *dev, long t) * * TI CDP code can call constraint_set here. */ + + return 0; } -void omap_pm_set_min_bus_tput(struct device *dev, u8 agent_id, unsigned long r) +int omap_pm_set_min_bus_tput(struct device *dev, u8 agent_id, unsigned long r) { if (!dev || (agent_id != OCP_INITIATOR_AGENT && agent_id != OCP_TARGET_AGENT)) { - WARN_ON(1); - return; + WARN(1, "OMAP PM: %s: invalid parameter(s)", __func__); + return -EINVAL; }; if (r == 0) @@ -83,13 +85,16 @@ void omap_pm_set_min_bus_tput(struct device *dev, u8 agent_id, unsigned long r) * * TI CDP code can call constraint_set here on the VDD2 OPP. */ + + return 0; } -void omap_pm_set_max_dev_wakeup_lat(struct device *dev, long t) +int omap_pm_set_max_dev_wakeup_lat(struct device *req_dev, struct device *dev, + long t) { - if (!dev || t < -1) { - WARN_ON(1); - return; + if (!req_dev || !dev || t < -1) { + WARN(1, "OMAP PM: %s: invalid parameter(s)", __func__); + return -EINVAL; }; if (t == -1) @@ -111,13 +116,15 @@ void omap_pm_set_max_dev_wakeup_lat(struct device *dev, long t) * * TI CDP code can call constraint_set here. */ + + return 0; } -void omap_pm_set_max_sdma_lat(struct device *dev, long t) +int omap_pm_set_max_sdma_lat(struct device *dev, long t) { if (!dev || t < -1) { - WARN_ON(1); - return; + WARN(1, "OMAP PM: %s: invalid parameter(s)", __func__); + return -EINVAL; }; if (t == -1) @@ -139,6 +146,7 @@ void omap_pm_set_max_sdma_lat(struct device *dev, long t) * TI CDP code can call constraint_set here. */ + return 0; } -- cgit v1.2.3-70-g09d2