From 44e51b29228cdd30bb8f54a42eb34ea0674d5f96 Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Mon, 11 Jul 2011 16:40:41 -0700 Subject: OMAP2+: Kconfig: don't select PM in OMAP2PLUS_TYPICAL CONFIG_PM is no longer a user-selectable Kconfig option. Rather it is automatically enabled if either CONFIG_SUSPEND or CONFIG_RUNTIME_PM is enabled, so having a 'select PM' here is redunant when 'select CONFIG_PM_RUNTIME' is present. Signed-off-by: Kevin Hilman --- arch/arm/mach-omap2/Kconfig | 1 - 1 file changed, 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index 4ae6257b39a..57b66d590c5 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -7,7 +7,6 @@ config ARCH_OMAP2PLUS_TYPICAL default y select AEABI select REGULATOR - select PM select PM_RUNTIME select VFP select NEON if ARCH_OMAP3 || ARCH_OMAP4 -- cgit v1.2.3-70-g09d2 From e13d8f383985b7ab8c859c1fa327e9b3d201894e Mon Sep 17 00:00:00 2001 From: Nishanth Menon Date: Sat, 9 Jul 2011 14:37:21 -0700 Subject: OMAP3+: SR: ensure pm-runtime callbacks can be invoked with IRQs disabled SmartReflex should be disabled while entering low power mode due to a) SmartReflex values are not defined for retention voltage, further b) with SmartReflex enabled, if CPU enters lower c-states, FSM will try to bump the voltage to current OPP's voltage for which it has entered c-state; hence SmartReflex needs to be disabled for MPU, CORE and IVA voltage domains in idle path before enabling auto retention voltage achievement on the device. However, since the current pm_runtime setup for SmartReflex devices are setup to allow callbacks to be invoked with interrupts enabled, calling SmartReflex enable/disable from other contexts such as idle paths where preemption is disabled causes warnings such as the following indicating of a potential race. [ 82.023895] [] (__irq_svc+0x3c/0x120) from [] (_raw_spin_unlock_irq+0x28/0x2c) [ 82.023895] [] (_raw_spin_unlock_irq+0x28/0x2c) from [] (rpm_callback+0x4c/0x68) [ 82.023956] [] (rpm_callback+0x4c/0x68) from [] (rpm_resume+0x338/0x53c) [ 82.023956] [] (rpm_resume+0x338/0x53c) from [] (__pm_runtime_resume+0x48/0x60) [ 82.023986] [] (__pm_runtime_resume+0x48/0x60) from [] (sr_enable+0xa8/0x19c) [ 82.023986] [] (sr_enable+0xa8/0x19c) from [] (omap_sr_enable+0x50/0x90) [ 82.024017] [] (omap_sr_enable+0x50/0x90) from [] (omap4_enter_sleep+0x138/0x168) Instead, we use pm_runtime_irq_safe to tell the PM core that callbacks can be invoked in interrupt disabled contexts. Acked-by: Rajendra Nayak Signed-off-by: Nishanth Menon [khilman@ti.com: minor changelog edits] Signed-off-by: Kevin Hilman --- arch/arm/mach-omap2/smartreflex.c | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/arm/mach-omap2/smartreflex.c b/arch/arm/mach-omap2/smartreflex.c index 2ce2fb7664b..dc8e86a54ac 100644 --- a/arch/arm/mach-omap2/smartreflex.c +++ b/arch/arm/mach-omap2/smartreflex.c @@ -860,6 +860,7 @@ static int __init omap_sr_probe(struct platform_device *pdev) irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0); pm_runtime_enable(&pdev->dev); + pm_runtime_irq_safe(&pdev->dev); sr_info->pdev = pdev; sr_info->srid = pdev->id; -- cgit v1.2.3-70-g09d2 From b66a4026d43d5766bcabed36106d254c727a77ec Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Tue, 7 Jun 2011 17:02:46 -0700 Subject: OMAP1: enable GENERIC_IRQ_CHIP OMAP1 needs this also since GPIO driver (common for all OMAPs) is being converted to use generic IRQ chip. Signed-off-by: Kevin Hilman --- arch/arm/plat-omap/Kconfig | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig index 6e6735f04ee..bb8f4a6b3e3 100644 --- a/arch/arm/plat-omap/Kconfig +++ b/arch/arm/plat-omap/Kconfig @@ -13,6 +13,7 @@ config ARCH_OMAP1 bool "TI OMAP1" select CLKDEV_LOOKUP select CLKSRC_MMIO + select GENERIC_IRQ_CHIP help "Systems based on omap7xx, omap15xx or omap16xx" -- cgit v1.2.3-70-g09d2 From 8c7f65943dfb93c2583f935f20ec39e8559d93d3 Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Thu, 21 Jul 2011 11:43:48 -0700 Subject: OMAP3: beagle: don't touch omap_device internals Board code should not touch omap_device internals. To get the MPU/IVA devices, use existing APIs: omap2_get_mpu_device(), omap2_get_iva_device(). Signed-off-by: Kevin Hilman --- arch/arm/mach-omap2/board-omap3beagle.c | 23 ++++++++++------------- 1 file changed, 10 insertions(+), 13 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c index 32f5f895568..3ae16b4e3f5 100644 --- a/arch/arm/mach-omap2/board-omap3beagle.c +++ b/arch/arm/mach-omap2/board-omap3beagle.c @@ -491,23 +491,22 @@ static void __init beagle_opp_init(void) /* Custom OPP enabled for all xM versions */ if (cpu_is_omap3630()) { - struct omap_hwmod *mh = omap_hwmod_lookup("mpu"); - struct omap_hwmod *dh = omap_hwmod_lookup("iva"); - struct device *dev; + struct device *mpu_dev, *iva_dev; - if (!mh || !dh) { + mpu_dev = omap2_get_mpuss_device(); + iva_dev = omap2_get_iva_device(); + + if (!mpu_dev || !iva_dev) { pr_err("%s: Aiee.. no mpu/dsp devices? %p %p\n", - __func__, mh, dh); + __func__, mpu_dev, iva_dev); return; } /* Enable MPU 1GHz and lower opps */ - dev = &mh->od->pdev.dev; - r = opp_enable(dev, 800000000); + r = opp_enable(mpu_dev, 800000000); /* TODO: MPU 1GHz needs SR and ABB */ /* Enable IVA 800MHz and lower opps */ - dev = &dh->od->pdev.dev; - r |= opp_enable(dev, 660000000); + r |= opp_enable(iva_dev, 660000000); /* TODO: DSP 800MHz needs SR and ABB */ if (r) { pr_err("%s: failed to enable higher opp %d\n", @@ -516,10 +515,8 @@ static void __init beagle_opp_init(void) * Cleanup - disable the higher freqs - we dont care * about the results */ - dev = &mh->od->pdev.dev; - opp_disable(dev, 800000000); - dev = &dh->od->pdev.dev; - opp_disable(dev, 660000000); + opp_disable(mpu_dev, 800000000); + opp_disable(iva_dev, 660000000); } } return; -- cgit v1.2.3-70-g09d2 From 98333b3dda1e490b02304a6a6643c294d4e520c3 Mon Sep 17 00:00:00 2001 From: Colin Cross Date: Fri, 22 Jul 2011 00:55:52 -0500 Subject: OMAP2+: PM: SmartReflex: use put_sync_suspend for IRQ-safe disabling omap_sr_disable_reset_volt is called with irqs off in omapx_enter_sleep, as part of idle sequence, this eventually calls sr_disable and pm_runtime_put_sync. pm_runtime_put_sync calls rpm_idle, which will enable interrupts in order to call the callback. In this short interval when interrupts are enabled, scenarios such as the following can occur: while interrupts are enabled, the timer interrupt that is supposed to wake the device out of idle occurs and is acked, so when the CPU finally goes to off, the timer is already gone, missing a wakeup event. Further, as the documentation for runtime states:" However, subsystems can use the pm_runtime_irq_safe() helper function to tell the PM core that a device's ->runtime_suspend() and ->runtime_resume() callbacks should be invoked in atomic context with interrupts disabled (->runtime_idle() is still invoked the default way)." Hence, replace pm_runtime_put_sync with pm_runtime_put_sync_suspend to invoke the suspend handler and shut off the fclk for SmartReflex module instead of using the idle handler in interrupt disabled context. Signed-off-by: Nishanth Menon Signed-off-by: Colin Cross [khilman@ti.com: minor Subject edits] Signed-off-by: Kevin Hilman --- arch/arm/mach-omap2/smartreflex.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/smartreflex.c b/arch/arm/mach-omap2/smartreflex.c index dc8e86a54ac..34c01a7de81 100644 --- a/arch/arm/mach-omap2/smartreflex.c +++ b/arch/arm/mach-omap2/smartreflex.c @@ -621,7 +621,7 @@ void sr_disable(struct voltagedomain *voltdm) sr_v2_disable(sr); } - pm_runtime_put_sync(&sr->pdev->dev); + pm_runtime_put_sync_suspend(&sr->pdev->dev); } /** -- cgit v1.2.3-70-g09d2 From d12d1fcafa8115602a8ce0c4a9256c7d3abdb5e1 Mon Sep 17 00:00:00 2001 From: Peter Ujfalusi Date: Tue, 9 Aug 2011 15:36:50 +0300 Subject: OMAP: Fix linking error in twl-common.c for OMAP2/3/4 only builds Commit b22f954 (OMAP4: Move common twl6030 configuration to twl-common) caused compile failures for code for OMAP arch which is not selected by the config. Fixes issues like: With CONFIG_ARCH_OMAP3=y and CONFIG_ARCH_OMAP4=n, I'm getting this: arch/arm/mach-omap2/built-in.o:(.data+0xf99c): undefined reference to `omap4430_phy_init' arch/arm/mach-omap2/built-in.o:(.data+0xf9a0): undefined reference to `omap4430_phy_exit' arch/arm/mach-omap2/built-in.o:(.data+0xf9a4): undefined reference to `omap4430_phy_power' arch/arm/mach-omap2/built-in.o:(.data+0xf9a8): undefined reference to `omap4430_phy_set_clk' arch/arm/mach-omap2/built-in.o:(.data+0xf9ac): undefined reference to `omap4430_phy_suspend' Fix the problem by moving the code to ifdef sections for omap3 and omap4. Signed-off-by: Peter Ujfalusi [tony@atomide.com: updated comments] Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/twl-common.c | 78 +++++++++++++++++++++------------------- 1 file changed, 41 insertions(+), 37 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/twl-common.c b/arch/arm/mach-omap2/twl-common.c index 2543342dbcc..daa056ed873 100644 --- a/arch/arm/mach-omap2/twl-common.c +++ b/arch/arm/mach-omap2/twl-common.c @@ -48,14 +48,7 @@ void __init omap_pmic_init(int bus, u32 clkrate, omap_register_i2c_bus(bus, clkrate, &pmic_i2c_board_info, 1); } -static struct twl4030_usb_data omap4_usb_pdata = { - .phy_init = omap4430_phy_init, - .phy_exit = omap4430_phy_exit, - .phy_power = omap4430_phy_power, - .phy_set_clock = omap4430_phy_set_clk, - .phy_suspend = omap4430_phy_suspend, -}; - +#if defined(CONFIG_ARCH_OMAP3) static struct twl4030_usb_data omap3_usb_pdata = { .usb_mode = T2_USB_MODE_ULPI, }; @@ -122,6 +115,45 @@ static struct regulator_init_data omap3_vpll2_idata = { .consumer_supplies = omap3_vpll2_supplies, }; +void __init omap3_pmic_get_config(struct twl4030_platform_data *pmic_data, + u32 pdata_flags, u32 regulators_flags) +{ + if (!pmic_data->irq_base) + pmic_data->irq_base = TWL4030_IRQ_BASE; + if (!pmic_data->irq_end) + pmic_data->irq_end = TWL4030_IRQ_END; + + /* Common platform data configurations */ + if (pdata_flags & TWL_COMMON_PDATA_USB && !pmic_data->usb) + pmic_data->usb = &omap3_usb_pdata; + + if (pdata_flags & TWL_COMMON_PDATA_BCI && !pmic_data->bci) + pmic_data->bci = &omap3_bci_pdata; + + if (pdata_flags & TWL_COMMON_PDATA_MADC && !pmic_data->madc) + pmic_data->madc = &omap3_madc_pdata; + + if (pdata_flags & TWL_COMMON_PDATA_AUDIO && !pmic_data->audio) + pmic_data->audio = &omap3_audio_pdata; + + /* Common regulator configurations */ + if (regulators_flags & TWL_COMMON_REGULATOR_VDAC && !pmic_data->vdac) + pmic_data->vdac = &omap3_vdac_idata; + + if (regulators_flags & TWL_COMMON_REGULATOR_VPLL2 && !pmic_data->vpll2) + pmic_data->vpll2 = &omap3_vpll2_idata; +} +#endif /* CONFIG_ARCH_OMAP3 */ + +#if defined(CONFIG_ARCH_OMAP4) +static struct twl4030_usb_data omap4_usb_pdata = { + .phy_init = omap4430_phy_init, + .phy_exit = omap4430_phy_exit, + .phy_power = omap4430_phy_power, + .phy_set_clock = omap4430_phy_set_clk, + .phy_suspend = omap4430_phy_suspend, +}; + static struct regulator_init_data omap4_vdac_idata = { .constraints = { .min_uV = 1800000, @@ -273,32 +305,4 @@ void __init omap4_pmic_get_config(struct twl4030_platform_data *pmic_data, !pmic_data->clk32kg) pmic_data->clk32kg = &omap4_clk32kg_idata; } - -void __init omap3_pmic_get_config(struct twl4030_platform_data *pmic_data, - u32 pdata_flags, u32 regulators_flags) -{ - if (!pmic_data->irq_base) - pmic_data->irq_base = TWL4030_IRQ_BASE; - if (!pmic_data->irq_end) - pmic_data->irq_end = TWL4030_IRQ_END; - - /* Common platform data configurations */ - if (pdata_flags & TWL_COMMON_PDATA_USB && !pmic_data->usb) - pmic_data->usb = &omap3_usb_pdata; - - if (pdata_flags & TWL_COMMON_PDATA_BCI && !pmic_data->bci) - pmic_data->bci = &omap3_bci_pdata; - - if (pdata_flags & TWL_COMMON_PDATA_MADC && !pmic_data->madc) - pmic_data->madc = &omap3_madc_pdata; - - if (pdata_flags & TWL_COMMON_PDATA_AUDIO && !pmic_data->audio) - pmic_data->audio = &omap3_audio_pdata; - - /* Common regulator configurations */ - if (regulators_flags & TWL_COMMON_REGULATOR_VDAC && !pmic_data->vdac) - pmic_data->vdac = &omap3_vdac_idata; - - if (regulators_flags & TWL_COMMON_REGULATOR_VPLL2 && !pmic_data->vpll2) - pmic_data->vpll2 = &omap3_vpll2_idata; -} +#endif /* CONFIG_ARCH_OMAP4 */ -- cgit v1.2.3-70-g09d2 From c9a48c2aac235f7a7e31fb7214a33afcd0da26b7 Mon Sep 17 00:00:00 2001 From: Paul Walmsley Date: Wed, 10 Aug 2011 00:57:42 -0600 Subject: OMAP: hwmod: fix build break on non-OMAP4 multi-OMAP2 builds Builds for multi-OMAP2 (e.g., OMAP2420 with OMAP2430) with CONFIG_ARCH_OMAP4=n fail with the following errors: arch/arm/mach-omap2/built-in.o: In function `_enable_module': arch/arm/mach-omap2/omap_hwmod.c:701: undefined reference to `omap4_cminst_module_enable' arch/arm/mach-omap2/built-in.o: In function `_disable_module': arch/arm/mach-omap2/omap_hwmod.c:726: undefined reference to `omap4_cminst_module_disable' arch/arm/mach-omap2/built-in.o: In function `_wait_target_disable': arch/arm/mach-omap2/omap_hwmod.c:1179: undefined reference to `omap4_cminst_wait_module_idle' This is probably due to the preprocessor directives in arch/arm/plat-omap/include/plat/cpu.h that convert some cpu_is_omap*() expressions from preprocessor directives into something that is only resolvable during runtime, if multiple OMAP2 build targets are selected. Thanks to Tony Lindgren for reporting. Signed-off-by: Paul Walmsley Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/cminst44xx.h | 25 ++++++++++++++++++++++++- 1 file changed, 24 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/cminst44xx.h b/arch/arm/mach-omap2/cminst44xx.h index f2ea6453ade..a018a732787 100644 --- a/arch/arm/mach-omap2/cminst44xx.h +++ b/arch/arm/mach-omap2/cminst44xx.h @@ -18,13 +18,36 @@ extern void omap4_cminst_clkdm_force_sleep(u8 part, s16 inst, u16 cdoffs); extern void omap4_cminst_clkdm_force_wakeup(u8 part, s16 inst, u16 cdoffs); extern int omap4_cminst_wait_module_ready(u8 part, u16 inst, s16 cdoffs, u16 clkctrl_offs); -extern int omap4_cminst_wait_module_idle(u8 part, u16 inst, s16 cdoffs, u16 clkctrl_offs); + +# ifdef CONFIG_ARCH_OMAP4 +extern int omap4_cminst_wait_module_idle(u8 part, u16 inst, s16 cdoffs, + u16 clkctrl_offs); extern void omap4_cminst_module_enable(u8 mode, u8 part, u16 inst, s16 cdoffs, u16 clkctrl_offs); extern void omap4_cminst_module_disable(u8 part, u16 inst, s16 cdoffs, u16 clkctrl_offs); +# else + +static inline int omap4_cminst_wait_module_idle(u8 part, u16 inst, s16 cdoffs, + u16 clkctrl_offs) +{ + return 0; +} + +static inline void omap4_cminst_module_enable(u8 mode, u8 part, u16 inst, + s16 cdoffs, u16 clkctrl_offs) +{ +} + +static inline void omap4_cminst_module_disable(u8 part, u16 inst, s16 cdoffs, + u16 clkctrl_offs) +{ +} + +# endif + /* * In an ideal world, we would not export these low-level functions, * but this will probably take some time to fix properly -- cgit v1.2.3-70-g09d2 From 5686c4f8250448cdbb15226aa32793df055123c5 Mon Sep 17 00:00:00 2001 From: Raphaël Assénat Date: Tue, 9 Aug 2011 03:10:12 -0700 Subject: am3505/3517: Various platform defines for UART4 Add missing definitions for the AM3505/3517 UART4 such as DMAs, INTs and base address. Signed-of-by: Raphael Assenat Signed-off-by: Tony Lindgren --- arch/arm/plat-omap/include/plat/dma.h | 5 +++++ arch/arm/plat-omap/include/plat/irqs.h | 1 + arch/arm/plat-omap/include/plat/serial.h | 3 +++ 3 files changed, 9 insertions(+) (limited to 'arch') diff --git a/arch/arm/plat-omap/include/plat/dma.h b/arch/arm/plat-omap/include/plat/dma.h index d1c916fcf77..dc562a5c0a8 100644 --- a/arch/arm/plat-omap/include/plat/dma.h +++ b/arch/arm/plat-omap/include/plat/dma.h @@ -195,6 +195,11 @@ #define OMAP36XX_DMA_UART4_TX 81 /* S_DMA_80 */ #define OMAP36XX_DMA_UART4_RX 82 /* S_DMA_81 */ + +/* Only for AM35xx */ +#define AM35XX_DMA_UART4_TX 54 +#define AM35XX_DMA_UART4_RX 55 + /*----------------------------------------------------------------------------*/ #define OMAP1_DMA_TOUT_IRQ (1 << 0) diff --git a/arch/arm/plat-omap/include/plat/irqs.h b/arch/arm/plat-omap/include/plat/irqs.h index 926d25c780f..30e10719b77 100644 --- a/arch/arm/plat-omap/include/plat/irqs.h +++ b/arch/arm/plat-omap/include/plat/irqs.h @@ -357,6 +357,7 @@ #define INT_35XX_EMAC_C0_TX_PULSE_IRQ 69 #define INT_35XX_EMAC_C0_MISC_PULSE_IRQ 70 #define INT_35XX_USBOTG_IRQ 71 +#define INT_35XX_UART4 84 #define INT_35XX_CCDC_VD0_IRQ 88 #define INT_35XX_CCDC_VD1_IRQ 92 #define INT_35XX_CCDC_VD2_IRQ 93 diff --git a/arch/arm/plat-omap/include/plat/serial.h b/arch/arm/plat-omap/include/plat/serial.h index 2723f9166ea..de3b10c1812 100644 --- a/arch/arm/plat-omap/include/plat/serial.h +++ b/arch/arm/plat-omap/include/plat/serial.h @@ -56,6 +56,9 @@ #define TI816X_UART2_BASE 0x48022000 #define TI816X_UART3_BASE 0x48024000 +/* AM3505/3517 UART4 */ +#define AM35XX_UART4_BASE 0x4809E000 /* Only on AM3505/3517 */ + /* External port on Zoom2/3 */ #define ZOOM_UART_BASE 0x10000000 #define ZOOM_UART_VIRT 0xfa400000 -- cgit v1.2.3-70-g09d2 From 1d08fd9f6a7f2541a7b28a21fc638c4640d9cabb Mon Sep 17 00:00:00 2001 From: Oleg Drokin Date: Tue, 9 Aug 2011 03:10:22 -0700 Subject: Update Nook Color machine 3284 to common Encore name Machine database already updated: http://www.arm.linux.org.uk/developer/machines/list.php?id=3284 Signed-off-by: Oleg Drokin Acked-by: Russell King Signed-off-by: Tony Lindgren --- arch/arm/tools/mach-types | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/tools/mach-types b/arch/arm/tools/mach-types index 3b3776d0a1a..fff68d0d521 100644 --- a/arch/arm/tools/mach-types +++ b/arch/arm/tools/mach-types @@ -910,7 +910,7 @@ omapl138_case_a3 MACH_OMAPL138_CASE_A3 OMAPL138_CASE_A3 3280 uemd MACH_UEMD UEMD 3281 ccwmx51mut MACH_CCWMX51MUT CCWMX51MUT 3282 rockhopper MACH_ROCKHOPPER ROCKHOPPER 3283 -nookcolor MACH_NOOKCOLOR NOOKCOLOR 3284 +encore MACH_ENCORE ENCORE 3284 hkdkc100 MACH_HKDKC100 HKDKC100 3285 ts42xx MACH_TS42XX TS42XX 3286 aebl MACH_AEBL AEBL 3287 -- cgit v1.2.3-70-g09d2 From ae65eb729dd3d3309fb3b7a1badc7b67cada2357 Mon Sep 17 00:00:00 2001 From: Maxin John Date: Mon, 8 Aug 2011 10:15:46 +0000 Subject: arch:arm:plat-omap:iovmm: remove unused variable 'va' The pointer "va" returned from "phys_to_virt(pa)" is never used in "sgtable_fill_kmalloc()".So,it is safe to remove this set-but-unused variable. Signed-off-by: Maxin B. John Signed-off-by: Tony Lindgren --- arch/arm/plat-omap/iovmm.c | 3 --- 1 file changed, 3 deletions(-) (limited to 'arch') diff --git a/arch/arm/plat-omap/iovmm.c b/arch/arm/plat-omap/iovmm.c index c60737c49a3..79e7fedb860 100644 --- a/arch/arm/plat-omap/iovmm.c +++ b/arch/arm/plat-omap/iovmm.c @@ -423,9 +423,6 @@ static void sgtable_fill_kmalloc(struct sg_table *sgt, u32 pa, u32 da, { unsigned int i; struct scatterlist *sg; - void *va; - - va = phys_to_virt(pa); for_each_sg(sgt->sgl, sg, sgt->nents, i) { unsigned bytes; -- cgit v1.2.3-70-g09d2 From dccb3b0eb6924b54a8f30672979fdc28e164d997 Mon Sep 17 00:00:00 2001 From: Thomas Meyer Date: Sat, 6 Aug 2011 09:29:10 +0000 Subject: arm: mach-omap2: mux: use kstrdup() Use kstrdup rather than duplicating its implementation The semantic patch that makes this output is available in scripts/coccinelle/api/kstrdup.cocci. More information about semantic patching is available at http://coccinelle.lip6.fr/ Signed-off-by: Thomas Meyer Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/mux.c | 14 ++++---------- 1 file changed, 4 insertions(+), 10 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c index c7fb22abc21..655e9480eb9 100644 --- a/arch/arm/mach-omap2/mux.c +++ b/arch/arm/mach-omap2/mux.c @@ -821,11 +821,10 @@ static void __init omap_mux_set_cmdline_signals(void) if (!omap_mux_options) return; - options = kmalloc(strlen(omap_mux_options) + 1, GFP_KERNEL); + options = kstrdup(omap_mux_options, GFP_KERNEL); if (!options) return; - strcpy(options, omap_mux_options); next_opt = options; while ((token = strsep(&next_opt, ",")) != NULL) { @@ -855,24 +854,19 @@ static int __init omap_mux_copy_names(struct omap_mux *src, for (i = 0; i < OMAP_MUX_NR_MODES; i++) { if (src->muxnames[i]) { - dst->muxnames[i] = - kmalloc(strlen(src->muxnames[i]) + 1, - GFP_KERNEL); + dst->muxnames[i] = kstrdup(src->muxnames[i], + GFP_KERNEL); if (!dst->muxnames[i]) goto free; - strcpy(dst->muxnames[i], src->muxnames[i]); } } #ifdef CONFIG_DEBUG_FS for (i = 0; i < OMAP_MUX_NR_SIDES; i++) { if (src->balls[i]) { - dst->balls[i] = - kmalloc(strlen(src->balls[i]) + 1, - GFP_KERNEL); + dst->balls[i] = kstrdup(src->balls[i], GFP_KERNEL); if (!dst->balls[i]) goto free; - strcpy(dst->balls[i], src->balls[i]); } } #endif -- cgit v1.2.3-70-g09d2 From 133e6b55b1e8cf48418b4aa44aa7441d4cce86a0 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Tue, 9 Aug 2011 16:28:25 +0000 Subject: OMAP3: am3517crane: remove NULL board_mux from board file Since 7203f8a48bb63015ebe58a6f2a38aec1cb208b9d (arm: mach-omap2: remove NULL board_mux from board files) NULL board_mux is defined in mux.h. Signed-off-by: Johan Hovold Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/board-am3517crane.c | 2 -- 1 file changed, 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/board-am3517crane.c b/arch/arm/mach-omap2/board-am3517crane.c index 5f2b55ff04f..933e9353cb3 100644 --- a/arch/arm/mach-omap2/board-am3517crane.c +++ b/arch/arm/mach-omap2/board-am3517crane.c @@ -45,8 +45,6 @@ static struct omap_board_config_kernel am3517_crane_config[] __initdata = { static struct omap_board_mux board_mux[] __initdata = { { .reg_offset = OMAP_MUX_TERMINATOR }, }; -#else -#define board_mux NULL #endif static void __init am3517_crane_init_early(void) -- cgit v1.2.3-70-g09d2 From e9d0b97eef235eccc3df9ddb9895b35c53a8aaa2 Mon Sep 17 00:00:00 2001 From: Hemant Pedanekar Date: Wed, 10 Aug 2011 13:19:35 +0000 Subject: omap: timer: Set dmtimer used as clocksource in autoreload mode If CONFIG_OMAP_32K_TIMER is not selected and dmtimer is used as clocksource, the timer stops counting once overflow occurs as it was not set in autoreload mode. This results into timekeeping failure: for example, 'sleep 1' at the shell after the timer counter overflow would hang. This patch sets up autoreload when starting the clocksource timer which fixes the above issue. Signed-off-by: Hemant Pedanekar Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/timer.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c index e9640728239..cf1de7d2630 100644 --- a/arch/arm/mach-omap2/timer.c +++ b/arch/arm/mach-omap2/timer.c @@ -293,7 +293,8 @@ static void __init omap2_gp_clocksource_init(int gptimer_id, pr_info("OMAP clocksource: GPTIMER%d at %lu Hz\n", gptimer_id, clksrc.rate); - __omap_dm_timer_load_start(clksrc.io_base, OMAP_TIMER_CTRL_ST, 0, 1); + __omap_dm_timer_load_start(clksrc.io_base, + OMAP_TIMER_CTRL_ST | OMAP_TIMER_CTRL_AR, 0, 1); init_sched_clock(&cd, dmtimer_update_sched_clock, 32, clksrc.rate); if (clocksource_register_hz(&clocksource_gpt, clksrc.rate)) -- cgit v1.2.3-70-g09d2