From 6d98bda79bea0e1be26c0767d0e9923ad3b72f2e Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Mon, 10 Dec 2007 15:29:22 +1100 Subject: powerpc: Fix IDE legacy vs. native fixups PowerMac and CHRP/BriQ platforms have quirks to switch some IDE controllers from legacy mode to fully native mode. Those quirks however will not work properly anymore due to a change to the generic code to better handle legacy IDE resources. This fixes it by moving those quirk to "early" quirks (so they run before resources are probed for the devices) and clearing all BARs after the conversion to force a reallocation of sane values. Signed-off-by: Benjamin Herrenschmidt Acked-by: Alan Cox Signed-off-by: Linus Torvalds --- arch/powerpc/platforms/chrp/pci.c | 21 +++++++++++++++------ arch/powerpc/platforms/powermac/pci.c | 11 +++++++++-- 2 files changed, 24 insertions(+), 8 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/platforms/chrp/pci.c b/arch/powerpc/platforms/chrp/pci.c index e43465d34d2..0340a342f77 100644 --- a/arch/powerpc/platforms/chrp/pci.c +++ b/arch/powerpc/platforms/chrp/pci.c @@ -317,8 +317,12 @@ chrp_find_bridges(void) /* SL82C105 IDE Control/Status Register */ #define SL82C105_IDECSR 0x40 -/* Fixup for Winbond ATA quirk, required for briq */ -void chrp_pci_fixup_winbond_ata(struct pci_dev *sl82c105) +/* Fixup for Winbond ATA quirk, required for briq mostly because the + * 8259 is configured for level sensitive IRQ 14 and so wants the + * ATA controller to be set to fully native mode or bad things + * will happen. + */ +static void __devinit chrp_pci_fixup_winbond_ata(struct pci_dev *sl82c105) { u8 progif; @@ -334,10 +338,15 @@ void chrp_pci_fixup_winbond_ata(struct pci_dev *sl82c105) sl82c105->class |= 0x05; /* Disable SL82C105 second port */ pci_write_config_word(sl82c105, SL82C105_IDECSR, 0x0003); + /* Clear IO BARs, they will be reassigned */ + pci_write_config_dword(sl82c105, PCI_BASE_ADDRESS_0, 0); + pci_write_config_dword(sl82c105, PCI_BASE_ADDRESS_1, 0); + pci_write_config_dword(sl82c105, PCI_BASE_ADDRESS_2, 0); + pci_write_config_dword(sl82c105, PCI_BASE_ADDRESS_3, 0); } } -DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_WINBOND, PCI_DEVICE_ID_WINBOND_82C105, - chrp_pci_fixup_winbond_ata); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_WINBOND, PCI_DEVICE_ID_WINBOND_82C105, + chrp_pci_fixup_winbond_ata); /* Pegasos2 firmware version 20040810 configures the built-in IDE controller * in legacy mode, but sets the PCI registers to PCI native mode. @@ -345,7 +354,7 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_WINBOND, PCI_DEVICE_ID_WINBOND_82C105, * mode as well. The same fixup must be done to the class-code property in * the IDE node /pci@80000000/ide@C,1 */ -static void chrp_pci_fixup_vt8231_ata(struct pci_dev *viaide) +static void __devinit chrp_pci_fixup_vt8231_ata(struct pci_dev *viaide) { u8 progif; struct pci_dev *viaisa; @@ -366,4 +375,4 @@ static void chrp_pci_fixup_vt8231_ata(struct pci_dev *viaide) pci_dev_put(viaisa); } -DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_1, chrp_pci_fixup_vt8231_ata); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_1, chrp_pci_fixup_vt8231_ata); diff --git a/arch/powerpc/platforms/powermac/pci.c b/arch/powerpc/platforms/powermac/pci.c index ec49099830d..f852ae3e0ee 100644 --- a/arch/powerpc/platforms/powermac/pci.c +++ b/arch/powerpc/platforms/powermac/pci.c @@ -1243,15 +1243,22 @@ void pmac_pci_fixup_pciata(struct pci_dev* dev) good: pci_read_config_byte(dev, PCI_CLASS_PROG, &progif); if ((progif & 5) != 5) { - printk(KERN_INFO "Forcing PCI IDE into native mode: %s\n", + printk(KERN_INFO "PCI: %s Forcing PCI IDE into native mode\n", pci_name(dev)); (void) pci_write_config_byte(dev, PCI_CLASS_PROG, progif|5); if (pci_read_config_byte(dev, PCI_CLASS_PROG, &progif) || (progif & 5) != 5) printk(KERN_ERR "Rewrite of PROGIF failed !\n"); + else { + /* Clear IO BARs, they will be reassigned */ + pci_write_config_dword(dev, PCI_BASE_ADDRESS_0, 0); + pci_write_config_dword(dev, PCI_BASE_ADDRESS_1, 0); + pci_write_config_dword(dev, PCI_BASE_ADDRESS_2, 0); + pci_write_config_dword(dev, PCI_BASE_ADDRESS_3, 0); + } } } -DECLARE_PCI_FIXUP_FINAL(PCI_ANY_ID, PCI_ANY_ID, pmac_pci_fixup_pciata); +DECLARE_PCI_FIXUP_EARLY(PCI_ANY_ID, PCI_ANY_ID, pmac_pci_fixup_pciata); #endif /* -- cgit v1.2.3-70-g09d2