From 66dc3304f3875ea85c630a57a88ecf79032890c4 Mon Sep 17 00:00:00 2001 From: Gerhard Pircher Date: Fri, 19 Jun 2009 11:40:57 +0000 Subject: powerpc/amigaone: Convert amigaone_init() to a machine_device_initcall() This allows to remove the ppc_md.init() hook in the setup code. Signed-off-by: Gerhard Pircher Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/platforms/amigaone/setup.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/platforms/amigaone/setup.c b/arch/powerpc/platforms/amigaone/setup.c index 443035366c1..9290a7a442d 100644 --- a/arch/powerpc/platforms/amigaone/setup.c +++ b/arch/powerpc/platforms/amigaone/setup.c @@ -110,13 +110,16 @@ void __init amigaone_init_IRQ(void) irq_set_default_host(i8259_get_host()); } -void __init amigaone_init(void) +static int __init request_isa_regions(void) { request_region(0x00, 0x20, "dma1"); request_region(0x40, 0x20, "timer"); request_region(0x80, 0x10, "dma page reg"); request_region(0xc0, 0x20, "dma2"); + + return 0; } +machine_device_initcall(amigaone, request_isa_regions); void amigaone_restart(char *cmd) { @@ -161,7 +164,6 @@ define_machine(amigaone) { .name = "AmigaOne", .probe = amigaone_probe, .setup_arch = amigaone_setup_arch, - .init = amigaone_init, .show_cpuinfo = amigaone_show_cpuinfo, .init_IRQ = amigaone_init_IRQ, .restart = amigaone_restart, -- cgit v1.2.3-70-g09d2 From 11a6b292c1bc9cb39970e44edd6958250f23d3a8 Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Sun, 5 Jul 2009 16:08:52 +0000 Subject: powerpc/mpic: Fix MPIC_BROKEN_REGREAD on non broken MPICs The workaround enabled by CONFIG_MPIC_BROKEN_REGREAD does not work on non-broken MPICs. The symptom is no interrupts being received. The fix is twofold. Firstly the code was broken for multiple isus, we need to index into the shadow array with the src_no, not the idx. Secondly, we always do the read, but only use the VECPRI_MASK and VECPRI_ACTIVITY bits from the hardware, the rest of "val" comes from the shadow. Signed-off-by: Michael Ellerman Signed-off-by: Olof Johansson Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/sysdev/mpic.c | 13 ++++++++----- 1 file changed, 8 insertions(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/sysdev/mpic.c b/arch/powerpc/sysdev/mpic.c index 3981ae4cb58..30c44e6b041 100644 --- a/arch/powerpc/sysdev/mpic.c +++ b/arch/powerpc/sysdev/mpic.c @@ -230,14 +230,16 @@ static inline u32 _mpic_irq_read(struct mpic *mpic, unsigned int src_no, unsigne { unsigned int isu = src_no >> mpic->isu_shift; unsigned int idx = src_no & mpic->isu_mask; + unsigned int val; + val = _mpic_read(mpic->reg_type, &mpic->isus[isu], + reg + (idx * MPIC_INFO(IRQ_STRIDE))); #ifdef CONFIG_MPIC_BROKEN_REGREAD if (reg == 0) - return mpic->isu_reg0_shadow[idx]; - else + val = (val & (MPIC_VECPRI_MASK | MPIC_VECPRI_ACTIVITY)) | + mpic->isu_reg0_shadow[src_no]; #endif - return _mpic_read(mpic->reg_type, &mpic->isus[isu], - reg + (idx * MPIC_INFO(IRQ_STRIDE))); + return val; } static inline void _mpic_irq_write(struct mpic *mpic, unsigned int src_no, @@ -251,7 +253,8 @@ static inline void _mpic_irq_write(struct mpic *mpic, unsigned int src_no, #ifdef CONFIG_MPIC_BROKEN_REGREAD if (reg == 0) - mpic->isu_reg0_shadow[idx] = value; + mpic->isu_reg0_shadow[src_no] = + value & ~(MPIC_VECPRI_MASK | MPIC_VECPRI_ACTIVITY); #endif } -- cgit v1.2.3-70-g09d2 From 0d2d3e38f72e400f602dade3f0ddffe0b3b9d4df Mon Sep 17 00:00:00 2001 From: Geoff Thorpe Date: Tue, 7 Jul 2009 15:23:56 +0000 Subject: powerpc: expose the multi-bit ops that underlie single-bit ops. The bitops.h functions that operate on a single bit in a bitfield are implemented by operating on the corresponding word location. In all cases the inner logic is valid if the mask being applied has more than one bit set, so this patch exposes those inner operations. Indeed, set_bits() was already available, but it duplicated code from set_bit() (rather than making the latter a wrapper) - it was also missing the PPC405_ERR77() workaround and the "volatile" address qualifier present in other APIs. This corrects that, and exposes the other multi-bit equivalents. One advantage of these multi-bit forms is that they allow word-sized variables to essentially be their own spinlocks, eg. very useful for state machines where an atomic "flags" variable can obviate the need for any additional locking. Signed-off-by: Geoff Thorpe Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/include/asm/bitops.h | 196 ++++++++++++-------------------------- 1 file changed, 62 insertions(+), 134 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/include/asm/bitops.h b/arch/powerpc/include/asm/bitops.h index 897eade3afb..56f2f2ea563 100644 --- a/arch/powerpc/include/asm/bitops.h +++ b/arch/powerpc/include/asm/bitops.h @@ -56,174 +56,102 @@ #define BITOP_WORD(nr) ((nr) / BITS_PER_LONG) #define BITOP_LE_SWIZZLE ((BITS_PER_LONG-1) & ~0x7) +/* Macro for generating the ***_bits() functions */ +#define DEFINE_BITOP(fn, op, prefix, postfix) \ +static __inline__ void fn(unsigned long mask, \ + volatile unsigned long *_p) \ +{ \ + unsigned long old; \ + unsigned long *p = (unsigned long *)_p; \ + __asm__ __volatile__ ( \ + prefix \ +"1:" PPC_LLARX "%0,0,%3\n" \ + stringify_in_c(op) "%0,%0,%2\n" \ + PPC405_ERR77(0,%3) \ + PPC_STLCX "%0,0,%3\n" \ + "bne- 1b\n" \ + postfix \ + : "=&r" (old), "+m" (*p) \ + : "r" (mask), "r" (p) \ + : "cc", "memory"); \ +} + +DEFINE_BITOP(set_bits, or, "", "") +DEFINE_BITOP(clear_bits, andc, "", "") +DEFINE_BITOP(clear_bits_unlock, andc, LWSYNC_ON_SMP, "") +DEFINE_BITOP(change_bits, xor, "", "") + static __inline__ void set_bit(int nr, volatile unsigned long *addr) { - unsigned long old; - unsigned long mask = BITOP_MASK(nr); - unsigned long *p = ((unsigned long *)addr) + BITOP_WORD(nr); - - __asm__ __volatile__( -"1:" PPC_LLARX "%0,0,%3 # set_bit\n" - "or %0,%0,%2\n" - PPC405_ERR77(0,%3) - PPC_STLCX "%0,0,%3\n" - "bne- 1b" - : "=&r" (old), "+m" (*p) - : "r" (mask), "r" (p) - : "cc" ); + set_bits(BITOP_MASK(nr), addr + BITOP_WORD(nr)); } static __inline__ void clear_bit(int nr, volatile unsigned long *addr) { - unsigned long old; - unsigned long mask = BITOP_MASK(nr); - unsigned long *p = ((unsigned long *)addr) + BITOP_WORD(nr); - - __asm__ __volatile__( -"1:" PPC_LLARX "%0,0,%3 # clear_bit\n" - "andc %0,%0,%2\n" - PPC405_ERR77(0,%3) - PPC_STLCX "%0,0,%3\n" - "bne- 1b" - : "=&r" (old), "+m" (*p) - : "r" (mask), "r" (p) - : "cc" ); + clear_bits(BITOP_MASK(nr), addr + BITOP_WORD(nr)); } static __inline__ void clear_bit_unlock(int nr, volatile unsigned long *addr) { - unsigned long old; - unsigned long mask = BITOP_MASK(nr); - unsigned long *p = ((unsigned long *)addr) + BITOP_WORD(nr); - - __asm__ __volatile__( - LWSYNC_ON_SMP -"1:" PPC_LLARX "%0,0,%3 # clear_bit_unlock\n" - "andc %0,%0,%2\n" - PPC405_ERR77(0,%3) - PPC_STLCX "%0,0,%3\n" - "bne- 1b" - : "=&r" (old), "+m" (*p) - : "r" (mask), "r" (p) - : "cc", "memory"); + clear_bits_unlock(BITOP_MASK(nr), addr + BITOP_WORD(nr)); } static __inline__ void change_bit(int nr, volatile unsigned long *addr) { - unsigned long old; - unsigned long mask = BITOP_MASK(nr); - unsigned long *p = ((unsigned long *)addr) + BITOP_WORD(nr); - - __asm__ __volatile__( -"1:" PPC_LLARX "%0,0,%3 # change_bit\n" - "xor %0,%0,%2\n" - PPC405_ERR77(0,%3) - PPC_STLCX "%0,0,%3\n" - "bne- 1b" - : "=&r" (old), "+m" (*p) - : "r" (mask), "r" (p) - : "cc" ); + change_bits(BITOP_MASK(nr), addr + BITOP_WORD(nr)); +} + +/* Like DEFINE_BITOP(), with changes to the arguments to 'op' and the output + * operands. */ +#define DEFINE_TESTOP(fn, op, prefix, postfix) \ +static __inline__ unsigned long fn( \ + unsigned long mask, \ + volatile unsigned long *_p) \ +{ \ + unsigned long old, t; \ + unsigned long *p = (unsigned long *)_p; \ + __asm__ __volatile__ ( \ + prefix \ +"1:" PPC_LLARX "%0,0,%3\n" \ + stringify_in_c(op) "%1,%0,%2\n" \ + PPC405_ERR77(0,%3) \ + PPC_STLCX "%1,0,%3\n" \ + "bne- 1b\n" \ + postfix \ + : "=&r" (old), "=&r" (t) \ + : "r" (mask), "r" (p) \ + : "cc", "memory"); \ + return (old & mask); \ } +DEFINE_TESTOP(test_and_set_bits, or, LWSYNC_ON_SMP, ISYNC_ON_SMP) +DEFINE_TESTOP(test_and_set_bits_lock, or, "", ISYNC_ON_SMP) +DEFINE_TESTOP(test_and_clear_bits, andc, LWSYNC_ON_SMP, ISYNC_ON_SMP) +DEFINE_TESTOP(test_and_change_bits, xor, LWSYNC_ON_SMP, ISYNC_ON_SMP) + static __inline__ int test_and_set_bit(unsigned long nr, volatile unsigned long *addr) { - unsigned long old, t; - unsigned long mask = BITOP_MASK(nr); - unsigned long *p = ((unsigned long *)addr) + BITOP_WORD(nr); - - __asm__ __volatile__( - LWSYNC_ON_SMP -"1:" PPC_LLARX "%0,0,%3 # test_and_set_bit\n" - "or %1,%0,%2 \n" - PPC405_ERR77(0,%3) - PPC_STLCX "%1,0,%3 \n" - "bne- 1b" - ISYNC_ON_SMP - : "=&r" (old), "=&r" (t) - : "r" (mask), "r" (p) - : "cc", "memory"); - - return (old & mask) != 0; + return test_and_set_bits(BITOP_MASK(nr), addr + BITOP_WORD(nr)) != 0; } static __inline__ int test_and_set_bit_lock(unsigned long nr, volatile unsigned long *addr) { - unsigned long old, t; - unsigned long mask = BITOP_MASK(nr); - unsigned long *p = ((unsigned long *)addr) + BITOP_WORD(nr); - - __asm__ __volatile__( -"1:" PPC_LLARX "%0,0,%3 # test_and_set_bit_lock\n" - "or %1,%0,%2 \n" - PPC405_ERR77(0,%3) - PPC_STLCX "%1,0,%3 \n" - "bne- 1b" - ISYNC_ON_SMP - : "=&r" (old), "=&r" (t) - : "r" (mask), "r" (p) - : "cc", "memory"); - - return (old & mask) != 0; + return test_and_set_bits_lock(BITOP_MASK(nr), + addr + BITOP_WORD(nr)) != 0; } static __inline__ int test_and_clear_bit(unsigned long nr, volatile unsigned long *addr) { - unsigned long old, t; - unsigned long mask = BITOP_MASK(nr); - unsigned long *p = ((unsigned long *)addr) + BITOP_WORD(nr); - - __asm__ __volatile__( - LWSYNC_ON_SMP -"1:" PPC_LLARX "%0,0,%3 # test_and_clear_bit\n" - "andc %1,%0,%2 \n" - PPC405_ERR77(0,%3) - PPC_STLCX "%1,0,%3 \n" - "bne- 1b" - ISYNC_ON_SMP - : "=&r" (old), "=&r" (t) - : "r" (mask), "r" (p) - : "cc", "memory"); - - return (old & mask) != 0; + return test_and_clear_bits(BITOP_MASK(nr), addr + BITOP_WORD(nr)) != 0; } static __inline__ int test_and_change_bit(unsigned long nr, volatile unsigned long *addr) { - unsigned long old, t; - unsigned long mask = BITOP_MASK(nr); - unsigned long *p = ((unsigned long *)addr) + BITOP_WORD(nr); - - __asm__ __volatile__( - LWSYNC_ON_SMP -"1:" PPC_LLARX "%0,0,%3 # test_and_change_bit\n" - "xor %1,%0,%2 \n" - PPC405_ERR77(0,%3) - PPC_STLCX "%1,0,%3 \n" - "bne- 1b" - ISYNC_ON_SMP - : "=&r" (old), "=&r" (t) - : "r" (mask), "r" (p) - : "cc", "memory"); - - return (old & mask) != 0; -} - -static __inline__ void set_bits(unsigned long mask, unsigned long *addr) -{ - unsigned long old; - - __asm__ __volatile__( -"1:" PPC_LLARX "%0,0,%3 # set_bits\n" - "or %0,%0,%2\n" - PPC_STLCX "%0,0,%3\n" - "bne- 1b" - : "=&r" (old), "+m" (*addr) - : "r" (mask), "r" (addr) - : "cc"); + return test_and_change_bits(BITOP_MASK(nr), addr + BITOP_WORD(nr)) != 0; } #include -- cgit v1.2.3-70-g09d2 From 30d0b3682887a81f0335b42f20116fd40d743371 Mon Sep 17 00:00:00 2001 From: Anton Blanchard Date: Mon, 13 Jul 2009 20:53:51 +0000 Subject: powerpc: Move 64bit VDSO to improve context switch performance On 64bit applications the VDSO is the only thing in segment 0. Since the VDSO is position independent we can remove the hint and let get_unmapped_area pick an area. This will mean the vdso will be near other mmaps and will share an SLB entry: 10000000-10001000 r-xp 00000000 08:06 5778459 /root/context_switch_64 10010000-10011000 r--p 00000000 08:06 5778459 /root/context_switch_64 10011000-10012000 rw-p 00001000 08:06 5778459 /root/context_switch_64 fffa92ae000-fffa92b0000 rw-p 00000000 00:00 0 fffa92b0000-fffa9453000 r-xp 00000000 08:06 4334051 /lib64/power6/libc-2.9.so fffa9453000-fffa9462000 ---p 001a3000 08:06 4334051 /lib64/power6/libc-2.9.so fffa9462000-fffa9466000 r--p 001a2000 08:06 4334051 /lib64/power6/libc-2.9.so fffa9466000-fffa947c000 rw-p 001a6000 08:06 4334051 /lib64/power6/libc-2.9.so fffa947c000-fffa9480000 rw-p 00000000 00:00 0 fffa9480000-fffa94a8000 r-xp 00000000 08:06 4333852 /lib64/ld-2.9.so fffa94b3000-fffa94b4000 rw-p 00000000 00:00 0 fffa94b4000-fffa94b7000 r-xp 00000000 00:00 0 [vdso] <----- here I am fffa94b7000-fffa94b8000 r--p 00027000 08:06 4333852 /lib64/ld-2.9.so fffa94b8000-fffa94bb000 rw-p 00028000 08:06 4333852 /lib64/ld-2.9.so fffa94bb000-fffa94bc000 rw-p 00000000 00:00 0 fffe4c10000-fffe4c25000 rw-p 00000000 00:00 0 [stack] On a microbenchmark that bounces a token between two 64bit processes over pipes and calls gettimeofday each iteration (to access the VDSO), our context switch rate goes from 268k to 277k ctx switches/sec (tested on a 4GHz POWER6). Signed-off-by: Anton Blanchard Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/include/asm/vdso.h | 3 +-- arch/powerpc/kernel/vdso.c | 7 ++++++- 2 files changed, 7 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/include/asm/vdso.h b/arch/powerpc/include/asm/vdso.h index 26fc449bd98..dc0419b66f1 100644 --- a/arch/powerpc/include/asm/vdso.h +++ b/arch/powerpc/include/asm/vdso.h @@ -7,9 +7,8 @@ #define VDSO32_LBASE 0x100000 #define VDSO64_LBASE 0x100000 -/* Default map addresses */ +/* Default map addresses for 32bit vDSO */ #define VDSO32_MBASE VDSO32_LBASE -#define VDSO64_MBASE VDSO64_LBASE #define VDSO_VERSION_STRING LINUX_2.6.15 diff --git a/arch/powerpc/kernel/vdso.c b/arch/powerpc/kernel/vdso.c index ad06d5c75b1..a0abce251d0 100644 --- a/arch/powerpc/kernel/vdso.c +++ b/arch/powerpc/kernel/vdso.c @@ -203,7 +203,12 @@ int arch_setup_additional_pages(struct linux_binprm *bprm, int uses_interp) } else { vdso_pagelist = vdso64_pagelist; vdso_pages = vdso64_pages; - vdso_base = VDSO64_MBASE; + /* + * On 64bit we don't have a preferred map address. This + * allows get_unmapped_area to find an area near other mmaps + * and most likely share a SLB entry. + */ + vdso_base = 0; } #else vdso_pagelist = vdso32_pagelist; -- cgit v1.2.3-70-g09d2 From 5eb9bac0406f2beb84b21aac6feb89d33d9f3f5c Mon Sep 17 00:00:00 2001 From: Anton Blanchard Date: Mon, 13 Jul 2009 20:53:52 +0000 Subject: powerpc: Rearrange SLB preload code With the new top down layout it is likely that the pc and stack will be in the same segment, because the pc is most likely in a library allocated via a top down mmap. Right now we bail out early if these segments match. Rearrange the SLB preload code to sanity check all SLB preload addresses are not in the kernel, then check all addresses for conflicts. Signed-off-by: Anton Blanchard Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/mm/slb.c | 21 ++++++++------------- 1 file changed, 8 insertions(+), 13 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/mm/slb.c b/arch/powerpc/mm/slb.c index 5b7038f248b..227056c21ee 100644 --- a/arch/powerpc/mm/slb.c +++ b/arch/powerpc/mm/slb.c @@ -218,23 +218,18 @@ void switch_slb(struct task_struct *tsk, struct mm_struct *mm) else unmapped_base = TASK_UNMAPPED_BASE_USER64; - if (is_kernel_addr(pc)) - return; - slb_allocate(pc); - - if (esids_match(pc,stack)) + if (is_kernel_addr(pc) || is_kernel_addr(stack) || + is_kernel_addr(unmapped_base)) return; - if (is_kernel_addr(stack)) - return; - slb_allocate(stack); + slb_allocate(pc); - if (esids_match(pc,unmapped_base) || esids_match(stack,unmapped_base)) - return; + if (!esids_match(pc, stack)) + slb_allocate(stack); - if (is_kernel_addr(unmapped_base)) - return; - slb_allocate(unmapped_base); + if (!esids_match(pc, unmapped_base) && + !esids_match(stack, unmapped_base)) + slb_allocate(unmapped_base); } static inline void patch_slb_encoding(unsigned int *insn_addr, -- cgit v1.2.3-70-g09d2 From de4376c2846bb5a8fc6fe8dbd0e4ff30905493e6 Mon Sep 17 00:00:00 2001 From: Anton Blanchard Date: Mon, 13 Jul 2009 20:53:53 +0000 Subject: powerpc: Preload application text segment instead of TASK_UNMAPPED_BASE TASK_UNMAPPED_BASE is not used with the new top down mmap layout. We can reuse this preload slot by loading in the segment at 0x10000000, where almost all PowerPC binaries are linked at. On a microbenchmark that bounces a token between two 64bit processes over pipes and calls gettimeofday each iteration (to access the VDSO), both the 32bit and 64bit context switch rate improves (tested on a 4GHz POWER6): 32bit: 273k/sec -> 283k/sec 64bit: 277k/sec -> 284k/sec Signed-off-by: Anton Blanchard Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/mm/slb.c | 17 ++++++++--------- 1 file changed, 8 insertions(+), 9 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/mm/slb.c b/arch/powerpc/mm/slb.c index 227056c21ee..6bc8b4aeba5 100644 --- a/arch/powerpc/mm/slb.c +++ b/arch/powerpc/mm/slb.c @@ -184,7 +184,7 @@ void switch_slb(struct task_struct *tsk, struct mm_struct *mm) unsigned long slbie_data = 0; unsigned long pc = KSTK_EIP(tsk); unsigned long stack = KSTK_ESP(tsk); - unsigned long unmapped_base; + unsigned long exec_base; if (!cpu_has_feature(CPU_FTR_NO_SLBIE_B) && offset <= SLB_CACHE_ENTRIES) { @@ -212,14 +212,13 @@ void switch_slb(struct task_struct *tsk, struct mm_struct *mm) /* * preload some userspace segments into the SLB. + * Almost all 32 and 64bit PowerPC executables are linked at + * 0x10000000 so it makes sense to preload this segment. */ - if (test_tsk_thread_flag(tsk, TIF_32BIT)) - unmapped_base = TASK_UNMAPPED_BASE_USER32; - else - unmapped_base = TASK_UNMAPPED_BASE_USER64; + exec_base = 0x10000000; if (is_kernel_addr(pc) || is_kernel_addr(stack) || - is_kernel_addr(unmapped_base)) + is_kernel_addr(exec_base)) return; slb_allocate(pc); @@ -227,9 +226,9 @@ void switch_slb(struct task_struct *tsk, struct mm_struct *mm) if (!esids_match(pc, stack)) slb_allocate(stack); - if (!esids_match(pc, unmapped_base) && - !esids_match(stack, unmapped_base)) - slb_allocate(unmapped_base); + if (!esids_match(pc, exec_base) && + !esids_match(stack, exec_base)) + slb_allocate(exec_base); } static inline void patch_slb_encoding(unsigned int *insn_addr, -- cgit v1.2.3-70-g09d2 From 8aa34ab8b2dc96ca6c4feecfb87ed13f0d40ef98 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Tue, 14 Jul 2009 20:52:52 +0000 Subject: powerpc: Rename exception.h to exception-64s.h The file include/asm/exception.h contains definitions that are specific to exception handling on 64-bit server type processors. This renames the file to exception-64s.h to reflect that fact and avoid confusion. Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/include/asm/exception-64s.h | 279 +++++++++++++++++++++++++++++ arch/powerpc/include/asm/exception.h | 279 ----------------------------- arch/powerpc/kernel/exceptions-64s.S | 2 + arch/powerpc/kernel/head_64.S | 1 - arch/powerpc/platforms/iseries/exception.h | 2 +- 5 files changed, 282 insertions(+), 281 deletions(-) create mode 100644 arch/powerpc/include/asm/exception-64s.h delete mode 100644 arch/powerpc/include/asm/exception.h (limited to 'arch') diff --git a/arch/powerpc/include/asm/exception-64s.h b/arch/powerpc/include/asm/exception-64s.h new file mode 100644 index 00000000000..d3d4534e3c7 --- /dev/null +++ b/arch/powerpc/include/asm/exception-64s.h @@ -0,0 +1,279 @@ +#ifndef _ASM_POWERPC_EXCEPTION_H +#define _ASM_POWERPC_EXCEPTION_H +/* + * Extracted from head_64.S + * + * PowerPC version + * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org) + * + * Rewritten by Cort Dougan (cort@cs.nmt.edu) for PReP + * Copyright (C) 1996 Cort Dougan + * Adapted for Power Macintosh by Paul Mackerras. + * Low-level exception handlers and MMU support + * rewritten by Paul Mackerras. + * Copyright (C) 1996 Paul Mackerras. + * + * Adapted for 64bit PowerPC by Dave Engebretsen, Peter Bergner, and + * Mike Corrigan {engebret|bergner|mikejc}@us.ibm.com + * + * This file contains the low-level support and setup for the + * PowerPC-64 platform, including trap and interrupt dispatch. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ +/* + * The following macros define the code that appears as + * the prologue to each of the exception handlers. They + * are split into two parts to allow a single kernel binary + * to be used for pSeries and iSeries. + * + * We make as much of the exception code common between native + * exception handlers (including pSeries LPAR) and iSeries LPAR + * implementations as possible. + */ + +#define EX_R9 0 +#define EX_R10 8 +#define EX_R11 16 +#define EX_R12 24 +#define EX_R13 32 +#define EX_SRR0 40 +#define EX_DAR 48 +#define EX_DSISR 56 +#define EX_CCR 60 +#define EX_R3 64 +#define EX_LR 72 + +/* + * We're short on space and time in the exception prolog, so we can't + * use the normal SET_REG_IMMEDIATE macro. Normally we just need the + * low halfword of the address, but for Kdump we need the whole low + * word. + */ +#define LOAD_HANDLER(reg, label) \ + addi reg,reg,(label)-_stext; /* virt addr of handler ... */ + +#define EXCEPTION_PROLOG_1(area) \ + mfspr r13,SPRN_SPRG3; /* get paca address into r13 */ \ + std r9,area+EX_R9(r13); /* save r9 - r12 */ \ + std r10,area+EX_R10(r13); \ + std r11,area+EX_R11(r13); \ + std r12,area+EX_R12(r13); \ + mfspr r9,SPRN_SPRG1; \ + std r9,area+EX_R13(r13); \ + mfcr r9 + +#define EXCEPTION_PROLOG_PSERIES(area, label) \ + EXCEPTION_PROLOG_1(area); \ + ld r12,PACAKBASE(r13); /* get high part of &label */ \ + ld r10,PACAKMSR(r13); /* get MSR value for kernel */ \ + mfspr r11,SPRN_SRR0; /* save SRR0 */ \ + LOAD_HANDLER(r12,label) \ + mtspr SPRN_SRR0,r12; \ + mfspr r12,SPRN_SRR1; /* and SRR1 */ \ + mtspr SPRN_SRR1,r10; \ + rfid; \ + b . /* prevent speculative execution */ + +/* + * The common exception prolog is used for all except a few exceptions + * such as a segment miss on a kernel address. We have to be prepared + * to take another exception from the point where we first touch the + * kernel stack onwards. + * + * On entry r13 points to the paca, r9-r13 are saved in the paca, + * r9 contains the saved CR, r11 and r12 contain the saved SRR0 and + * SRR1, and relocation is on. + */ +#define EXCEPTION_PROLOG_COMMON(n, area) \ + andi. r10,r12,MSR_PR; /* See if coming from user */ \ + mr r10,r1; /* Save r1 */ \ + subi r1,r1,INT_FRAME_SIZE; /* alloc frame on kernel stack */ \ + beq- 1f; \ + ld r1,PACAKSAVE(r13); /* kernel stack to use */ \ +1: cmpdi cr1,r1,0; /* check if r1 is in userspace */ \ + bge- cr1,2f; /* abort if it is */ \ + b 3f; \ +2: li r1,(n); /* will be reloaded later */ \ + sth r1,PACA_TRAP_SAVE(r13); \ + b bad_stack; \ +3: std r9,_CCR(r1); /* save CR in stackframe */ \ + std r11,_NIP(r1); /* save SRR0 in stackframe */ \ + std r12,_MSR(r1); /* save SRR1 in stackframe */ \ + std r10,0(r1); /* make stack chain pointer */ \ + std r0,GPR0(r1); /* save r0 in stackframe */ \ + std r10,GPR1(r1); /* save r1 in stackframe */ \ + ACCOUNT_CPU_USER_ENTRY(r9, r10); \ + std r2,GPR2(r1); /* save r2 in stackframe */ \ + SAVE_4GPRS(3, r1); /* save r3 - r6 in stackframe */ \ + SAVE_2GPRS(7, r1); /* save r7, r8 in stackframe */ \ + ld r9,area+EX_R9(r13); /* move r9, r10 to stackframe */ \ + ld r10,area+EX_R10(r13); \ + std r9,GPR9(r1); \ + std r10,GPR10(r1); \ + ld r9,area+EX_R11(r13); /* move r11 - r13 to stackframe */ \ + ld r10,area+EX_R12(r13); \ + ld r11,area+EX_R13(r13); \ + std r9,GPR11(r1); \ + std r10,GPR12(r1); \ + std r11,GPR13(r1); \ + ld r2,PACATOC(r13); /* get kernel TOC into r2 */ \ + mflr r9; /* save LR in stackframe */ \ + std r9,_LINK(r1); \ + mfctr r10; /* save CTR in stackframe */ \ + std r10,_CTR(r1); \ + lbz r10,PACASOFTIRQEN(r13); \ + mfspr r11,SPRN_XER; /* save XER in stackframe */ \ + std r10,SOFTE(r1); \ + std r11,_XER(r1); \ + li r9,(n)+1; \ + std r9,_TRAP(r1); /* set trap number */ \ + li r10,0; \ + ld r11,exception_marker@toc(r2); \ + std r10,RESULT(r1); /* clear regs->result */ \ + std r11,STACK_FRAME_OVERHEAD-16(r1); /* mark the frame */ + +/* + * Exception vectors. + */ +#define STD_EXCEPTION_PSERIES(n, label) \ + . = n; \ + .globl label##_pSeries; \ +label##_pSeries: \ + HMT_MEDIUM; \ + mtspr SPRN_SPRG1,r13; /* save r13 */ \ + EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, label##_common) + +#define HSTD_EXCEPTION_PSERIES(n, label) \ + . = n; \ + .globl label##_pSeries; \ +label##_pSeries: \ + HMT_MEDIUM; \ + mtspr SPRN_SPRG1,r20; /* save r20 */ \ + mfspr r20,SPRN_HSRR0; /* copy HSRR0 to SRR0 */ \ + mtspr SPRN_SRR0,r20; \ + mfspr r20,SPRN_HSRR1; /* copy HSRR0 to SRR0 */ \ + mtspr SPRN_SRR1,r20; \ + mfspr r20,SPRN_SPRG1; /* restore r20 */ \ + mtspr SPRN_SPRG1,r13; /* save r13 */ \ + EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, label##_common) + + +#define MASKABLE_EXCEPTION_PSERIES(n, label) \ + . = n; \ + .globl label##_pSeries; \ +label##_pSeries: \ + HMT_MEDIUM; \ + mtspr SPRN_SPRG1,r13; /* save r13 */ \ + mfspr r13,SPRN_SPRG3; /* get paca address into r13 */ \ + std r9,PACA_EXGEN+EX_R9(r13); /* save r9, r10 */ \ + std r10,PACA_EXGEN+EX_R10(r13); \ + lbz r10,PACASOFTIRQEN(r13); \ + mfcr r9; \ + cmpwi r10,0; \ + beq masked_interrupt; \ + mfspr r10,SPRN_SPRG1; \ + std r10,PACA_EXGEN+EX_R13(r13); \ + std r11,PACA_EXGEN+EX_R11(r13); \ + std r12,PACA_EXGEN+EX_R12(r13); \ + ld r12,PACAKBASE(r13); /* get high part of &label */ \ + ld r10,PACAKMSR(r13); /* get MSR value for kernel */ \ + mfspr r11,SPRN_SRR0; /* save SRR0 */ \ + LOAD_HANDLER(r12,label##_common) \ + mtspr SPRN_SRR0,r12; \ + mfspr r12,SPRN_SRR1; /* and SRR1 */ \ + mtspr SPRN_SRR1,r10; \ + rfid; \ + b . /* prevent speculative execution */ + +#ifdef CONFIG_PPC_ISERIES +#define DISABLE_INTS \ + li r11,0; \ + stb r11,PACASOFTIRQEN(r13); \ +BEGIN_FW_FTR_SECTION; \ + stb r11,PACAHARDIRQEN(r13); \ +END_FW_FTR_SECTION_IFCLR(FW_FEATURE_ISERIES); \ + TRACE_DISABLE_INTS; \ +BEGIN_FW_FTR_SECTION; \ + mfmsr r10; \ + ori r10,r10,MSR_EE; \ + mtmsrd r10,1; \ +END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES) +#else +#define DISABLE_INTS \ + li r11,0; \ + stb r11,PACASOFTIRQEN(r13); \ + stb r11,PACAHARDIRQEN(r13); \ + TRACE_DISABLE_INTS +#endif /* CONFIG_PPC_ISERIES */ + +#define ENABLE_INTS \ + ld r12,_MSR(r1); \ + mfmsr r11; \ + rlwimi r11,r12,0,MSR_EE; \ + mtmsrd r11,1 + +#define STD_EXCEPTION_COMMON(trap, label, hdlr) \ + .align 7; \ + .globl label##_common; \ +label##_common: \ + EXCEPTION_PROLOG_COMMON(trap, PACA_EXGEN); \ + DISABLE_INTS; \ + bl .save_nvgprs; \ + addi r3,r1,STACK_FRAME_OVERHEAD; \ + bl hdlr; \ + b .ret_from_except + +/* + * Like STD_EXCEPTION_COMMON, but for exceptions that can occur + * in the idle task and therefore need the special idle handling. + */ +#define STD_EXCEPTION_COMMON_IDLE(trap, label, hdlr) \ + .align 7; \ + .globl label##_common; \ +label##_common: \ + EXCEPTION_PROLOG_COMMON(trap, PACA_EXGEN); \ + FINISH_NAP; \ + DISABLE_INTS; \ + bl .save_nvgprs; \ + addi r3,r1,STACK_FRAME_OVERHEAD; \ + bl hdlr; \ + b .ret_from_except + +#define STD_EXCEPTION_COMMON_LITE(trap, label, hdlr) \ + .align 7; \ + .globl label##_common; \ +label##_common: \ + EXCEPTION_PROLOG_COMMON(trap, PACA_EXGEN); \ + FINISH_NAP; \ + DISABLE_INTS; \ +BEGIN_FTR_SECTION \ + bl .ppc64_runlatch_on; \ +END_FTR_SECTION_IFSET(CPU_FTR_CTRL) \ + addi r3,r1,STACK_FRAME_OVERHEAD; \ + bl hdlr; \ + b .ret_from_except_lite + +/* + * When the idle code in power4_idle puts the CPU into NAP mode, + * it has to do so in a loop, and relies on the external interrupt + * and decrementer interrupt entry code to get it out of the loop. + * It sets the _TLF_NAPPING bit in current_thread_info()->local_flags + * to signal that it is in the loop and needs help to get out. + */ +#ifdef CONFIG_PPC_970_NAP +#define FINISH_NAP \ +BEGIN_FTR_SECTION \ + clrrdi r11,r1,THREAD_SHIFT; \ + ld r9,TI_LOCAL_FLAGS(r11); \ + andi. r10,r9,_TLF_NAPPING; \ + bnel power4_fixup_nap; \ +END_FTR_SECTION_IFSET(CPU_FTR_CAN_NAP) +#else +#define FINISH_NAP +#endif + +#endif /* _ASM_POWERPC_EXCEPTION_H */ diff --git a/arch/powerpc/include/asm/exception.h b/arch/powerpc/include/asm/exception.h deleted file mode 100644 index d3d4534e3c7..00000000000 --- a/arch/powerpc/include/asm/exception.h +++ /dev/null @@ -1,279 +0,0 @@ -#ifndef _ASM_POWERPC_EXCEPTION_H -#define _ASM_POWERPC_EXCEPTION_H -/* - * Extracted from head_64.S - * - * PowerPC version - * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org) - * - * Rewritten by Cort Dougan (cort@cs.nmt.edu) for PReP - * Copyright (C) 1996 Cort Dougan - * Adapted for Power Macintosh by Paul Mackerras. - * Low-level exception handlers and MMU support - * rewritten by Paul Mackerras. - * Copyright (C) 1996 Paul Mackerras. - * - * Adapted for 64bit PowerPC by Dave Engebretsen, Peter Bergner, and - * Mike Corrigan {engebret|bergner|mikejc}@us.ibm.com - * - * This file contains the low-level support and setup for the - * PowerPC-64 platform, including trap and interrupt dispatch. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ -/* - * The following macros define the code that appears as - * the prologue to each of the exception handlers. They - * are split into two parts to allow a single kernel binary - * to be used for pSeries and iSeries. - * - * We make as much of the exception code common between native - * exception handlers (including pSeries LPAR) and iSeries LPAR - * implementations as possible. - */ - -#define EX_R9 0 -#define EX_R10 8 -#define EX_R11 16 -#define EX_R12 24 -#define EX_R13 32 -#define EX_SRR0 40 -#define EX_DAR 48 -#define EX_DSISR 56 -#define EX_CCR 60 -#define EX_R3 64 -#define EX_LR 72 - -/* - * We're short on space and time in the exception prolog, so we can't - * use the normal SET_REG_IMMEDIATE macro. Normally we just need the - * low halfword of the address, but for Kdump we need the whole low - * word. - */ -#define LOAD_HANDLER(reg, label) \ - addi reg,reg,(label)-_stext; /* virt addr of handler ... */ - -#define EXCEPTION_PROLOG_1(area) \ - mfspr r13,SPRN_SPRG3; /* get paca address into r13 */ \ - std r9,area+EX_R9(r13); /* save r9 - r12 */ \ - std r10,area+EX_R10(r13); \ - std r11,area+EX_R11(r13); \ - std r12,area+EX_R12(r13); \ - mfspr r9,SPRN_SPRG1; \ - std r9,area+EX_R13(r13); \ - mfcr r9 - -#define EXCEPTION_PROLOG_PSERIES(area, label) \ - EXCEPTION_PROLOG_1(area); \ - ld r12,PACAKBASE(r13); /* get high part of &label */ \ - ld r10,PACAKMSR(r13); /* get MSR value for kernel */ \ - mfspr r11,SPRN_SRR0; /* save SRR0 */ \ - LOAD_HANDLER(r12,label) \ - mtspr SPRN_SRR0,r12; \ - mfspr r12,SPRN_SRR1; /* and SRR1 */ \ - mtspr SPRN_SRR1,r10; \ - rfid; \ - b . /* prevent speculative execution */ - -/* - * The common exception prolog is used for all except a few exceptions - * such as a segment miss on a kernel address. We have to be prepared - * to take another exception from the point where we first touch the - * kernel stack onwards. - * - * On entry r13 points to the paca, r9-r13 are saved in the paca, - * r9 contains the saved CR, r11 and r12 contain the saved SRR0 and - * SRR1, and relocation is on. - */ -#define EXCEPTION_PROLOG_COMMON(n, area) \ - andi. r10,r12,MSR_PR; /* See if coming from user */ \ - mr r10,r1; /* Save r1 */ \ - subi r1,r1,INT_FRAME_SIZE; /* alloc frame on kernel stack */ \ - beq- 1f; \ - ld r1,PACAKSAVE(r13); /* kernel stack to use */ \ -1: cmpdi cr1,r1,0; /* check if r1 is in userspace */ \ - bge- cr1,2f; /* abort if it is */ \ - b 3f; \ -2: li r1,(n); /* will be reloaded later */ \ - sth r1,PACA_TRAP_SAVE(r13); \ - b bad_stack; \ -3: std r9,_CCR(r1); /* save CR in stackframe */ \ - std r11,_NIP(r1); /* save SRR0 in stackframe */ \ - std r12,_MSR(r1); /* save SRR1 in stackframe */ \ - std r10,0(r1); /* make stack chain pointer */ \ - std r0,GPR0(r1); /* save r0 in stackframe */ \ - std r10,GPR1(r1); /* save r1 in stackframe */ \ - ACCOUNT_CPU_USER_ENTRY(r9, r10); \ - std r2,GPR2(r1); /* save r2 in stackframe */ \ - SAVE_4GPRS(3, r1); /* save r3 - r6 in stackframe */ \ - SAVE_2GPRS(7, r1); /* save r7, r8 in stackframe */ \ - ld r9,area+EX_R9(r13); /* move r9, r10 to stackframe */ \ - ld r10,area+EX_R10(r13); \ - std r9,GPR9(r1); \ - std r10,GPR10(r1); \ - ld r9,area+EX_R11(r13); /* move r11 - r13 to stackframe */ \ - ld r10,area+EX_R12(r13); \ - ld r11,area+EX_R13(r13); \ - std r9,GPR11(r1); \ - std r10,GPR12(r1); \ - std r11,GPR13(r1); \ - ld r2,PACATOC(r13); /* get kernel TOC into r2 */ \ - mflr r9; /* save LR in stackframe */ \ - std r9,_LINK(r1); \ - mfctr r10; /* save CTR in stackframe */ \ - std r10,_CTR(r1); \ - lbz r10,PACASOFTIRQEN(r13); \ - mfspr r11,SPRN_XER; /* save XER in stackframe */ \ - std r10,SOFTE(r1); \ - std r11,_XER(r1); \ - li r9,(n)+1; \ - std r9,_TRAP(r1); /* set trap number */ \ - li r10,0; \ - ld r11,exception_marker@toc(r2); \ - std r10,RESULT(r1); /* clear regs->result */ \ - std r11,STACK_FRAME_OVERHEAD-16(r1); /* mark the frame */ - -/* - * Exception vectors. - */ -#define STD_EXCEPTION_PSERIES(n, label) \ - . = n; \ - .globl label##_pSeries; \ -label##_pSeries: \ - HMT_MEDIUM; \ - mtspr SPRN_SPRG1,r13; /* save r13 */ \ - EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, label##_common) - -#define HSTD_EXCEPTION_PSERIES(n, label) \ - . = n; \ - .globl label##_pSeries; \ -label##_pSeries: \ - HMT_MEDIUM; \ - mtspr SPRN_SPRG1,r20; /* save r20 */ \ - mfspr r20,SPRN_HSRR0; /* copy HSRR0 to SRR0 */ \ - mtspr SPRN_SRR0,r20; \ - mfspr r20,SPRN_HSRR1; /* copy HSRR0 to SRR0 */ \ - mtspr SPRN_SRR1,r20; \ - mfspr r20,SPRN_SPRG1; /* restore r20 */ \ - mtspr SPRN_SPRG1,r13; /* save r13 */ \ - EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, label##_common) - - -#define MASKABLE_EXCEPTION_PSERIES(n, label) \ - . = n; \ - .globl label##_pSeries; \ -label##_pSeries: \ - HMT_MEDIUM; \ - mtspr SPRN_SPRG1,r13; /* save r13 */ \ - mfspr r13,SPRN_SPRG3; /* get paca address into r13 */ \ - std r9,PACA_EXGEN+EX_R9(r13); /* save r9, r10 */ \ - std r10,PACA_EXGEN+EX_R10(r13); \ - lbz r10,PACASOFTIRQEN(r13); \ - mfcr r9; \ - cmpwi r10,0; \ - beq masked_interrupt; \ - mfspr r10,SPRN_SPRG1; \ - std r10,PACA_EXGEN+EX_R13(r13); \ - std r11,PACA_EXGEN+EX_R11(r13); \ - std r12,PACA_EXGEN+EX_R12(r13); \ - ld r12,PACAKBASE(r13); /* get high part of &label */ \ - ld r10,PACAKMSR(r13); /* get MSR value for kernel */ \ - mfspr r11,SPRN_SRR0; /* save SRR0 */ \ - LOAD_HANDLER(r12,label##_common) \ - mtspr SPRN_SRR0,r12; \ - mfspr r12,SPRN_SRR1; /* and SRR1 */ \ - mtspr SPRN_SRR1,r10; \ - rfid; \ - b . /* prevent speculative execution */ - -#ifdef CONFIG_PPC_ISERIES -#define DISABLE_INTS \ - li r11,0; \ - stb r11,PACASOFTIRQEN(r13); \ -BEGIN_FW_FTR_SECTION; \ - stb r11,PACAHARDIRQEN(r13); \ -END_FW_FTR_SECTION_IFCLR(FW_FEATURE_ISERIES); \ - TRACE_DISABLE_INTS; \ -BEGIN_FW_FTR_SECTION; \ - mfmsr r10; \ - ori r10,r10,MSR_EE; \ - mtmsrd r10,1; \ -END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES) -#else -#define DISABLE_INTS \ - li r11,0; \ - stb r11,PACASOFTIRQEN(r13); \ - stb r11,PACAHARDIRQEN(r13); \ - TRACE_DISABLE_INTS -#endif /* CONFIG_PPC_ISERIES */ - -#define ENABLE_INTS \ - ld r12,_MSR(r1); \ - mfmsr r11; \ - rlwimi r11,r12,0,MSR_EE; \ - mtmsrd r11,1 - -#define STD_EXCEPTION_COMMON(trap, label, hdlr) \ - .align 7; \ - .globl label##_common; \ -label##_common: \ - EXCEPTION_PROLOG_COMMON(trap, PACA_EXGEN); \ - DISABLE_INTS; \ - bl .save_nvgprs; \ - addi r3,r1,STACK_FRAME_OVERHEAD; \ - bl hdlr; \ - b .ret_from_except - -/* - * Like STD_EXCEPTION_COMMON, but for exceptions that can occur - * in the idle task and therefore need the special idle handling. - */ -#define STD_EXCEPTION_COMMON_IDLE(trap, label, hdlr) \ - .align 7; \ - .globl label##_common; \ -label##_common: \ - EXCEPTION_PROLOG_COMMON(trap, PACA_EXGEN); \ - FINISH_NAP; \ - DISABLE_INTS; \ - bl .save_nvgprs; \ - addi r3,r1,STACK_FRAME_OVERHEAD; \ - bl hdlr; \ - b .ret_from_except - -#define STD_EXCEPTION_COMMON_LITE(trap, label, hdlr) \ - .align 7; \ - .globl label##_common; \ -label##_common: \ - EXCEPTION_PROLOG_COMMON(trap, PACA_EXGEN); \ - FINISH_NAP; \ - DISABLE_INTS; \ -BEGIN_FTR_SECTION \ - bl .ppc64_runlatch_on; \ -END_FTR_SECTION_IFSET(CPU_FTR_CTRL) \ - addi r3,r1,STACK_FRAME_OVERHEAD; \ - bl hdlr; \ - b .ret_from_except_lite - -/* - * When the idle code in power4_idle puts the CPU into NAP mode, - * it has to do so in a loop, and relies on the external interrupt - * and decrementer interrupt entry code to get it out of the loop. - * It sets the _TLF_NAPPING bit in current_thread_info()->local_flags - * to signal that it is in the loop and needs help to get out. - */ -#ifdef CONFIG_PPC_970_NAP -#define FINISH_NAP \ -BEGIN_FTR_SECTION \ - clrrdi r11,r1,THREAD_SHIFT; \ - ld r9,TI_LOCAL_FLAGS(r11); \ - andi. r10,r9,_TLF_NAPPING; \ - bnel power4_fixup_nap; \ -END_FTR_SECTION_IFSET(CPU_FTR_CAN_NAP) -#else -#define FINISH_NAP -#endif - -#endif /* _ASM_POWERPC_EXCEPTION_H */ diff --git a/arch/powerpc/kernel/exceptions-64s.S b/arch/powerpc/kernel/exceptions-64s.S index eb898112e57..72644cf22ca 100644 --- a/arch/powerpc/kernel/exceptions-64s.S +++ b/arch/powerpc/kernel/exceptions-64s.S @@ -12,6 +12,8 @@ * */ +#include + /* * We layout physical memory as follows: * 0x0000 - 0x00ff : Secondary processor spin code diff --git a/arch/powerpc/kernel/head_64.S b/arch/powerpc/kernel/head_64.S index 012505ebd9f..9196ef36d43 100644 --- a/arch/powerpc/kernel/head_64.S +++ b/arch/powerpc/kernel/head_64.S @@ -36,7 +36,6 @@ #include #include #include -#include #include /* The physical memory is layed out such that the secondary processor diff --git a/arch/powerpc/platforms/iseries/exception.h b/arch/powerpc/platforms/iseries/exception.h index ced45a8fa1a..e26eb86ac73 100644 --- a/arch/powerpc/platforms/iseries/exception.h +++ b/arch/powerpc/platforms/iseries/exception.h @@ -24,7 +24,7 @@ * as published by the Free Software Foundation; either version * 2 of the License, or (at your option) any later version. */ -#include +#include #define EXCEPTION_PROLOG_ISERIES_1 \ mfmsr r10; \ -- cgit v1.2.3-70-g09d2 From ee43eb788b3a06425fffb912677e2e1c8b00dd3b Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Tue, 14 Jul 2009 20:52:54 +0000 Subject: powerpc: Use names rather than numbers for SPRGs (v2) The kernel uses SPRG registers for various purposes, typically in low level assembly code as scratch registers or to hold per-cpu global infos such as the PACA or the current thread_info pointer. We want to be able to easily shuffle the usage of those registers as some implementations have specific constraints realted to some of them, for example, some have userspace readable aliases, etc.. and the current choice isn't always the best. This patch should not change any code generation, and replaces the usage of SPRN_SPRGn everywhere in the kernel with a named replacement and adds documentation next to the definition of the names as to what those are used for on each processor family. The only parts that still use the original numbers are bits of KVM or suspend/resume code that just blindly needs to save/restore all the SPRGs. Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/include/asm/exception-64s.h | 18 ++--- arch/powerpc/include/asm/reg.h | 113 ++++++++++++++++++++++++++ arch/powerpc/kernel/cpu_setup_6xx.S | 2 +- arch/powerpc/kernel/entry_32.S | 20 ++--- arch/powerpc/kernel/entry_64.S | 4 +- arch/powerpc/kernel/exceptions-64s.S | 44 ++++------ arch/powerpc/kernel/fpu.S | 2 +- arch/powerpc/kernel/head_32.S | 40 +++++----- arch/powerpc/kernel/head_40x.S | 124 ++++++++++++++--------------- arch/powerpc/kernel/head_44x.S | 56 ++++++------- arch/powerpc/kernel/head_64.S | 14 ++-- arch/powerpc/kernel/head_8xx.S | 13 +-- arch/powerpc/kernel/head_booke.h | 50 +++++------- arch/powerpc/kernel/head_fsl_booke.S | 60 +++++++------- arch/powerpc/kernel/setup_64.c | 4 +- arch/powerpc/kernel/vector.S | 2 +- arch/powerpc/kvm/booke_interrupts.S | 18 ++--- arch/powerpc/mm/hash_low_32.S | 4 +- arch/powerpc/platforms/iseries/exception.S | 28 +++---- arch/powerpc/platforms/iseries/exception.h | 4 +- 20 files changed, 356 insertions(+), 264 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/include/asm/exception-64s.h b/arch/powerpc/include/asm/exception-64s.h index d3d4534e3c7..773e380b5fe 100644 --- a/arch/powerpc/include/asm/exception-64s.h +++ b/arch/powerpc/include/asm/exception-64s.h @@ -57,12 +57,12 @@ addi reg,reg,(label)-_stext; /* virt addr of handler ... */ #define EXCEPTION_PROLOG_1(area) \ - mfspr r13,SPRN_SPRG3; /* get paca address into r13 */ \ + mfspr r13,SPRN_SPRG_PACA; /* get paca address into r13 */ \ std r9,area+EX_R9(r13); /* save r9 - r12 */ \ std r10,area+EX_R10(r13); \ std r11,area+EX_R11(r13); \ std r12,area+EX_R12(r13); \ - mfspr r9,SPRN_SPRG1; \ + mfspr r9,SPRN_SPRG_SCRATCH0; \ std r9,area+EX_R13(r13); \ mfcr r9 @@ -144,7 +144,7 @@ .globl label##_pSeries; \ label##_pSeries: \ HMT_MEDIUM; \ - mtspr SPRN_SPRG1,r13; /* save r13 */ \ + mtspr SPRN_SPRG_SCRATCH0,r13; /* save r13 */ \ EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, label##_common) #define HSTD_EXCEPTION_PSERIES(n, label) \ @@ -152,13 +152,13 @@ label##_pSeries: \ .globl label##_pSeries; \ label##_pSeries: \ HMT_MEDIUM; \ - mtspr SPRN_SPRG1,r20; /* save r20 */ \ + mtspr SPRN_SPRG_SCRATCH0,r20; /* save r20 */ \ mfspr r20,SPRN_HSRR0; /* copy HSRR0 to SRR0 */ \ mtspr SPRN_SRR0,r20; \ mfspr r20,SPRN_HSRR1; /* copy HSRR0 to SRR0 */ \ mtspr SPRN_SRR1,r20; \ - mfspr r20,SPRN_SPRG1; /* restore r20 */ \ - mtspr SPRN_SPRG1,r13; /* save r13 */ \ + mfspr r20,SPRN_SPRG_SCRATCH0; /* restore r20 */ \ + mtspr SPRN_SPRG_SCRATCH0,r13; /* save r13 */ \ EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, label##_common) @@ -167,15 +167,15 @@ label##_pSeries: \ .globl label##_pSeries; \ label##_pSeries: \ HMT_MEDIUM; \ - mtspr SPRN_SPRG1,r13; /* save r13 */ \ - mfspr r13,SPRN_SPRG3; /* get paca address into r13 */ \ + mtspr SPRN_SPRG_SCRATCH0,r13; /* save r13 */ \ + mfspr r13,SPRN_SPRG_PACA; /* get paca address into r13 */ \ std r9,PACA_EXGEN+EX_R9(r13); /* save r9, r10 */ \ std r10,PACA_EXGEN+EX_R10(r13); \ lbz r10,PACASOFTIRQEN(r13); \ mfcr r9; \ cmpwi r10,0; \ beq masked_interrupt; \ - mfspr r10,SPRN_SPRG1; \ + mfspr r10,SPRN_SPRG_SCRATCH0; \ std r10,PACA_EXGEN+EX_R13(r13); \ std r11,PACA_EXGEN+EX_R11(r13); \ std r12,PACA_EXGEN+EX_R12(r13); \ diff --git a/arch/powerpc/include/asm/reg.h b/arch/powerpc/include/asm/reg.h index 1170267736d..a8179cc99ac 100644 --- a/arch/powerpc/include/asm/reg.h +++ b/arch/powerpc/include/asm/reg.h @@ -645,6 +645,119 @@ #define MMCR0_PMC2_LOADMISSTIME 0x5 #endif +/* + * SPRG usage: + * + * All 64-bit: + * - SPRG3 stores PACA pointer + * + * 64-bit server: + * - SPRG0 unused (reserved for HV on Power4) + * - SPRG1 scratch for exception vectors + * - SPRG2 scratch for exception vectors + * + * All 32-bit: + * - SPRG3 current thread_info pointer + * (virtual on BookE, physical on others) + * + * 32-bit classic: + * - SPRG0 scratch for exception vectors + * - SPRG1 scratch for exception vectors + * - SPRG2 indicator that we are in RTAS + * - SPRG4 (603 only) pseudo TLB LRU data + * + * 32-bit 40x: + * - SPRG0 scratch for exception vectors + * - SPRG1 scratch for exception vectors + * - SPRG2 scratch for exception vectors + * - SPRG4 scratch for exception vectors (not 403) + * - SPRG5 scratch for exception vectors (not 403) + * - SPRG6 scratch for exception vectors (not 403) + * - SPRG7 scratch for exception vectors (not 403) + * + * 32-bit 440 and FSL BookE: + * - SPRG0 scratch for exception vectors + * - SPRG1 scratch for exception vectors (*) + * - SPRG2 scratch for crit interrupts handler + * - SPRG4 scratch for exception vectors + * - SPRG5 scratch for exception vectors + * - SPRG6 scratch for machine check handler + * - SPRG7 scratch for exception vectors + * - SPRG9 scratch for debug vectors (e500 only) + * + * Additionally, BookE separates "read" and "write" + * of those registers. That allows to use the userspace + * readable variant for reads, which can avoid a fault + * with KVM type virtualization. + * + * (*) Under KVM, the host SPRG1 is used to point to + * the current VCPU data structure + * + * 32-bit 8xx: + * - SPRG0 scratch for exception vectors + * - SPRG1 scratch for exception vectors + * - SPRG2 apparently unused but initialized + * + */ +#ifdef CONFIG_PPC64 +#define SPRN_SPRG_PACA SPRN_SPRG3 +#else +#define SPRN_SPRG_THREAD SPRN_SPRG3 +#endif + +#ifdef CONFIG_PPC_BOOK3S_64 +#define SPRN_SPRG_SCRATCH0 SPRN_SPRG1 +#define SPRN_SPRG_SCRATCH1 SPRN_SPRG2 +#endif + +#ifdef CONFIG_PPC_BOOK3S_32 +#define SPRN_SPRG_SCRATCH0 SPRN_SPRG0 +#define SPRN_SPRG_SCRATCH1 SPRN_SPRG1 +#define SPRN_SPRG_RTAS SPRN_SPRG2 +#define SPRN_SPRG_603_LRU SPRN_SPRG4 +#endif + +#ifdef CONFIG_40x +#define SPRN_SPRG_SCRATCH0 SPRN_SPRG0 +#define SPRN_SPRG_SCRATCH1 SPRN_SPRG1 +#define SPRN_SPRG_SCRATCH2 SPRN_SPRG2 +#define SPRN_SPRG_SCRATCH3 SPRN_SPRG4 +#define SPRN_SPRG_SCRATCH4 SPRN_SPRG5 +#define SPRN_SPRG_SCRATCH5 SPRN_SPRG6 +#define SPRN_SPRG_SCRATCH6 SPRN_SPRG7 +#endif + +#ifdef CONFIG_BOOKE +#define SPRN_SPRG_RSCRATCH0 SPRN_SPRG0 +#define SPRN_SPRG_WSCRATCH0 SPRN_SPRG0 +#define SPRN_SPRG_RSCRATCH1 SPRN_SPRG1 +#define SPRN_SPRG_WSCRATCH1 SPRN_SPRG1 +#define SPRN_SPRG_RSCRATCH_CRIT SPRN_SPRG2 +#define SPRN_SPRG_WSCRATCH_CRIT SPRN_SPRG2 +#define SPRN_SPRG_RSCRATCH2 SPRN_SPRG4R +#define SPRN_SPRG_WSCRATCH2 SPRN_SPRG4W +#define SPRN_SPRG_RSCRATCH3 SPRN_SPRG5R +#define SPRN_SPRG_WSCRATCH3 SPRN_SPRG5W +#define SPRN_SPRG_RSCRATCH_MC SPRN_SPRG6R +#define SPRN_SPRG_WSCRATCH_MC SPRN_SPRG6W +#define SPRN_SPRG_RSCRATCH4 SPRN_SPRG7R +#define SPRN_SPRG_WSCRATCH4 SPRN_SPRG7W +#ifdef CONFIG_E200 +#define SPRN_SPRG_RSCRATCH_DBG SPRN_SPRG6R +#define SPRN_SPRG_WSCRATCH_DBG SPRN_SPRG6W +#else +#define SPRN_SPRG_RSCRATCH_DBG SPRN_SPRG9 +#define SPRN_SPRG_WSCRATCH_DBG SPRN_SPRG9 +#endif +#define SPRN_SPRG_RVCPU SPRN_SPRG1 +#define SPRN_SPRG_WVCPU SPRN_SPRG1 +#endif + +#ifdef CONFIG_8xx +#define SPRN_SPRG_SCRATCH0 SPRN_SPRG0 +#define SPRN_SPRG_SCRATCH1 SPRN_SPRG1 +#endif + /* * An mtfsf instruction with the L bit set. On CPUs that support this a * full 64bits of FPSCR is restored and on other CPUs the L bit is ignored. diff --git a/arch/powerpc/kernel/cpu_setup_6xx.S b/arch/powerpc/kernel/cpu_setup_6xx.S index 1e9949e6885..55cba4a8a95 100644 --- a/arch/powerpc/kernel/cpu_setup_6xx.S +++ b/arch/powerpc/kernel/cpu_setup_6xx.S @@ -21,7 +21,7 @@ _GLOBAL(__setup_cpu_603) mflr r4 BEGIN_MMU_FTR_SECTION li r10,0 - mtspr SPRN_SPRG4,r10 /* init SW LRU tracking */ + mtspr SPRN_SPRG_603_LRU,r10 /* init SW LRU tracking */ END_MMU_FTR_SECTION_IFSET(MMU_FTR_NEED_DTLB_SW_LRU) BEGIN_FTR_SECTION bl __init_fpu_registers diff --git a/arch/powerpc/kernel/entry_32.S b/arch/powerpc/kernel/entry_32.S index 3cadba60a4b..1175a8539e6 100644 --- a/arch/powerpc/kernel/entry_32.S +++ b/arch/powerpc/kernel/entry_32.S @@ -88,7 +88,7 @@ crit_transfer_to_handler: mfspr r0,SPRN_SRR1 stw r0,_SRR1(r11) - mfspr r8,SPRN_SPRG3 + mfspr r8,SPRN_SPRG_THREAD lwz r0,KSP_LIMIT(r8) stw r0,SAVED_KSP_LIMIT(r11) rlwimi r0,r1,0,0,(31-THREAD_SHIFT) @@ -108,7 +108,7 @@ crit_transfer_to_handler: mfspr r0,SPRN_SRR1 stw r0,crit_srr1@l(0) - mfspr r8,SPRN_SPRG3 + mfspr r8,SPRN_SPRG_THREAD lwz r0,KSP_LIMIT(r8) stw r0,saved_ksp_limit@l(0) rlwimi r0,r1,0,0,(31-THREAD_SHIFT) @@ -138,7 +138,7 @@ transfer_to_handler: mfspr r2,SPRN_XER stw r12,_CTR(r11) stw r2,_XER(r11) - mfspr r12,SPRN_SPRG3 + mfspr r12,SPRN_SPRG_THREAD addi r2,r12,-THREAD tovirt(r2,r2) /* set r2 to current */ beq 2f /* if from user, fix up THREAD.regs */ @@ -680,7 +680,7 @@ END_FTR_SECTION_IFSET(CPU_FTR_SPE) tophys(r0,r4) CLR_TOP32(r0) - mtspr SPRN_SPRG3,r0 /* Update current THREAD phys addr */ + mtspr SPRN_SPRG_THREAD,r0 /* Update current THREAD phys addr */ lwz r1,KSP(r4) /* Load new stack pointer */ /* save the old current 'last' for return value */ @@ -1057,7 +1057,7 @@ exc_exit_restart_end: #ifdef CONFIG_40x .globl ret_from_crit_exc ret_from_crit_exc: - mfspr r9,SPRN_SPRG3 + mfspr r9,SPRN_SPRG_THREAD lis r10,saved_ksp_limit@ha; lwz r10,saved_ksp_limit@l(r10); tovirt(r9,r9); @@ -1074,7 +1074,7 @@ ret_from_crit_exc: #ifdef CONFIG_BOOKE .globl ret_from_crit_exc ret_from_crit_exc: - mfspr r9,SPRN_SPRG3 + mfspr r9,SPRN_SPRG_THREAD lwz r10,SAVED_KSP_LIMIT(r1) stw r10,KSP_LIMIT(r9) RESTORE_xSRR(SRR0,SRR1); @@ -1083,7 +1083,7 @@ ret_from_crit_exc: .globl ret_from_debug_exc ret_from_debug_exc: - mfspr r9,SPRN_SPRG3 + mfspr r9,SPRN_SPRG_THREAD lwz r10,SAVED_KSP_LIMIT(r1) stw r10,KSP_LIMIT(r9) lwz r9,THREAD_INFO-THREAD(r9) @@ -1097,7 +1097,7 @@ ret_from_debug_exc: .globl ret_from_mcheck_exc ret_from_mcheck_exc: - mfspr r9,SPRN_SPRG3 + mfspr r9,SPRN_SPRG_THREAD lwz r10,SAVED_KSP_LIMIT(r1) stw r10,KSP_LIMIT(r9) RESTORE_xSRR(SRR0,SRR1); @@ -1255,7 +1255,7 @@ _GLOBAL(enter_rtas) MTMSRD(r0) /* don't get trashed */ li r9,MSR_KERNEL & ~(MSR_IR|MSR_DR) mtlr r6 - mtspr SPRN_SPRG2,r7 + mtspr SPRN_SPRG_RTAS,r7 mtspr SPRN_SRR0,r8 mtspr SPRN_SRR1,r9 RFI @@ -1265,7 +1265,7 @@ _GLOBAL(enter_rtas) FIX_SRR1(r9,r0) addi r1,r1,INT_FRAME_SIZE li r0,0 - mtspr SPRN_SPRG2,r0 + mtspr SPRN_SPRG_RTAS,r0 mtspr SPRN_SRR0,r8 mtspr SPRN_SRR1,r9 RFI /* return to caller */ diff --git a/arch/powerpc/kernel/entry_64.S b/arch/powerpc/kernel/entry_64.S index 43e073477c3..dbf0e311561 100644 --- a/arch/powerpc/kernel/entry_64.S +++ b/arch/powerpc/kernel/entry_64.S @@ -762,7 +762,7 @@ _GLOBAL(enter_rtas) _STATIC(rtas_return_loc) /* relocation is off at this point */ - mfspr r4,SPRN_SPRG3 /* Get PACA */ + mfspr r4,SPRN_SPRG_PACA /* Get PACA */ clrldi r4,r4,2 /* convert to realmode address */ bcl 20,31,$+4 @@ -793,7 +793,7 @@ _STATIC(rtas_restore_regs) REST_8GPRS(14, r1) /* Restore the non-volatiles */ REST_10GPRS(22, r1) /* ditto */ - mfspr r13,SPRN_SPRG3 + mfspr r13,SPRN_SPRG_PACA ld r4,_CCR(r1) mtcr r4 diff --git a/arch/powerpc/kernel/exceptions-64s.S b/arch/powerpc/kernel/exceptions-64s.S index 72644cf22ca..4e9640cc056 100644 --- a/arch/powerpc/kernel/exceptions-64s.S +++ b/arch/powerpc/kernel/exceptions-64s.S @@ -24,18 +24,6 @@ * 0x8000 - : Early init and support code */ - -/* - * SPRG Usage - * - * Register Definition - * - * SPRG0 reserved for hypervisor - * SPRG1 temp - used to save gpr - * SPRG2 temp - used to save gpr - * SPRG3 virt addr of paca - */ - /* * This is the start of the interrupt handlers for pSeries * This code runs with relocation off. @@ -53,16 +41,16 @@ __start_interrupts: . = 0x200 _machine_check_pSeries: HMT_MEDIUM - mtspr SPRN_SPRG1,r13 /* save r13 */ + mtspr SPRN_SPRG_SCRATCH0,r13 /* save r13 */ EXCEPTION_PROLOG_PSERIES(PACA_EXMC, machine_check_common) . = 0x300 .globl data_access_pSeries data_access_pSeries: HMT_MEDIUM - mtspr SPRN_SPRG1,r13 + mtspr SPRN_SPRG_SCRATCH0,r13 BEGIN_FTR_SECTION - mtspr SPRN_SPRG2,r12 + mtspr SPRN_SPRG_SCRATCH1,r12 mfspr r13,SPRN_DAR mfspr r12,SPRN_DSISR srdi r13,r13,60 @@ -71,7 +59,7 @@ BEGIN_FTR_SECTION cmpwi r13,0x2c beq do_stab_bolted_pSeries mtcrf 0x80,r12 - mfspr r12,SPRN_SPRG2 + mfspr r12,SPRN_SPRG_SCRATCH1 END_FTR_SECTION_IFCLR(CPU_FTR_SLB) EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, data_access_common) @@ -79,8 +67,8 @@ END_FTR_SECTION_IFCLR(CPU_FTR_SLB) .globl data_access_slb_pSeries data_access_slb_pSeries: HMT_MEDIUM - mtspr SPRN_SPRG1,r13 - mfspr r13,SPRN_SPRG3 /* get paca address into r13 */ + mtspr SPRN_SPRG_SCRATCH0,r13 + mfspr r13,SPRN_SPRG_PACA /* get paca address into r13 */ std r3,PACA_EXSLB+EX_R3(r13) mfspr r3,SPRN_DAR std r9,PACA_EXSLB+EX_R9(r13) /* save r9 - r12 */ @@ -93,7 +81,7 @@ data_access_slb_pSeries: std r10,PACA_EXSLB+EX_R10(r13) std r11,PACA_EXSLB+EX_R11(r13) std r12,PACA_EXSLB+EX_R12(r13) - mfspr r10,SPRN_SPRG1 + mfspr r10,SPRN_SPRG_SCRATCH0 std r10,PACA_EXSLB+EX_R13(r13) mfspr r12,SPRN_SRR1 /* and SRR1 */ #ifndef CONFIG_RELOCATABLE @@ -117,8 +105,8 @@ data_access_slb_pSeries: .globl instruction_access_slb_pSeries instruction_access_slb_pSeries: HMT_MEDIUM - mtspr SPRN_SPRG1,r13 - mfspr r13,SPRN_SPRG3 /* get paca address into r13 */ + mtspr SPRN_SPRG_SCRATCH0,r13 + mfspr r13,SPRN_SPRG_PACA /* get paca address into r13 */ std r3,PACA_EXSLB+EX_R3(r13) mfspr r3,SPRN_SRR0 /* SRR0 is faulting address */ std r9,PACA_EXSLB+EX_R9(r13) /* save r9 - r12 */ @@ -131,7 +119,7 @@ instruction_access_slb_pSeries: std r10,PACA_EXSLB+EX_R10(r13) std r11,PACA_EXSLB+EX_R11(r13) std r12,PACA_EXSLB+EX_R12(r13) - mfspr r10,SPRN_SPRG1 + mfspr r10,SPRN_SPRG_SCRATCH0 std r10,PACA_EXSLB+EX_R13(r13) mfspr r12,SPRN_SRR1 /* and SRR1 */ #ifndef CONFIG_RELOCATABLE @@ -161,7 +149,7 @@ BEGIN_FTR_SECTION beq- 1f END_FTR_SECTION_IFSET(CPU_FTR_REAL_LE) mr r9,r13 - mfspr r13,SPRN_SPRG3 + mfspr r13,SPRN_SPRG_PACA mfspr r11,SPRN_SRR0 ld r12,PACAKBASE(r13) ld r10,PACAKMSR(r13) @@ -230,14 +218,14 @@ masked_interrupt: rotldi r10,r10,16 mtspr SPRN_SRR1,r10 ld r10,PACA_EXGEN+EX_R10(r13) - mfspr r13,SPRN_SPRG1 + mfspr r13,SPRN_SPRG_SCRATCH0 rfid b . .align 7 do_stab_bolted_pSeries: mtcrf 0x80,r12 - mfspr r12,SPRN_SPRG2 + mfspr r12,SPRN_SPRG_SCRATCH1 EXCEPTION_PROLOG_PSERIES(PACA_EXSLB, .do_stab_bolted) #ifdef CONFIG_PPC_PSERIES @@ -248,14 +236,14 @@ do_stab_bolted_pSeries: .align 7 system_reset_fwnmi: HMT_MEDIUM - mtspr SPRN_SPRG1,r13 /* save r13 */ + mtspr SPRN_SPRG_SCRATCH0,r13 /* save r13 */ EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, system_reset_common) .globl machine_check_fwnmi .align 7 machine_check_fwnmi: HMT_MEDIUM - mtspr SPRN_SPRG1,r13 /* save r13 */ + mtspr SPRN_SPRG_SCRATCH0,r13 /* save r13 */ EXCEPTION_PROLOG_PSERIES(PACA_EXMC, machine_check_common) #endif /* CONFIG_PPC_PSERIES */ @@ -270,7 +258,7 @@ slb_miss_user_pseries: std r10,PACA_EXGEN+EX_R10(r13) std r11,PACA_EXGEN+EX_R11(r13) std r12,PACA_EXGEN+EX_R12(r13) - mfspr r10,SPRG1 + mfspr r10,SPRG_SCRATCH0 ld r11,PACA_EXSLB+EX_R9(r13) ld r12,PACA_EXSLB+EX_R3(r13) std r10,PACA_EXGEN+EX_R13(r13) diff --git a/arch/powerpc/kernel/fpu.S b/arch/powerpc/kernel/fpu.S index 2436df33c6f..fc8f5b14019 100644 --- a/arch/powerpc/kernel/fpu.S +++ b/arch/powerpc/kernel/fpu.S @@ -91,7 +91,7 @@ END_FTR_SECTION_IFSET(CPU_FTR_VSX) #endif /* CONFIG_SMP */ /* enable use of FP after return */ #ifdef CONFIG_PPC32 - mfspr r5,SPRN_SPRG3 /* current task's THREAD (phys) */ + mfspr r5,SPRN_SPRG_THREAD /* current task's THREAD (phys) */ lwz r4,THREAD_FPEXC_MODE(r5) ori r9,r9,MSR_FP /* enable FP for current */ or r9,r9,r4 diff --git a/arch/powerpc/kernel/head_32.S b/arch/powerpc/kernel/head_32.S index fc213294275..829c3fe7c5a 100644 --- a/arch/powerpc/kernel/head_32.S +++ b/arch/powerpc/kernel/head_32.S @@ -244,8 +244,8 @@ __secondary_hold_acknowledge: * task's thread_struct. */ #define EXCEPTION_PROLOG \ - mtspr SPRN_SPRG0,r10; \ - mtspr SPRN_SPRG1,r11; \ + mtspr SPRN_SPRG_SCRATCH0,r10; \ + mtspr SPRN_SPRG_SCRATCH1,r11; \ mfcr r10; \ EXCEPTION_PROLOG_1; \ EXCEPTION_PROLOG_2 @@ -255,7 +255,7 @@ __secondary_hold_acknowledge: andi. r11,r11,MSR_PR; \ tophys(r11,r1); /* use tophys(r1) if kernel */ \ beq 1f; \ - mfspr r11,SPRN_SPRG3; \ + mfspr r11,SPRN_SPRG_THREAD; \ lwz r11,THREAD_INFO-THREAD(r11); \ addi r11,r11,THREAD_SIZE; \ tophys(r11,r11); \ @@ -267,9 +267,9 @@ __secondary_hold_acknowledge: stw r10,_CCR(r11); /* save registers */ \ stw r12,GPR12(r11); \ stw r9,GPR9(r11); \ - mfspr r10,SPRN_SPRG0; \ + mfspr r10,SPRN_SPRG_SCRATCH0; \ stw r10,GPR10(r11); \ - mfspr r12,SPRN_SPRG1; \ + mfspr r12,SPRN_SPRG_SCRATCH1; \ stw r12,GPR11(r11); \ mflr r10; \ stw r10,_LINK(r11); \ @@ -355,11 +355,11 @@ i##n: \ * -- paulus. */ . = 0x200 - mtspr SPRN_SPRG0,r10 - mtspr SPRN_SPRG1,r11 + mtspr SPRN_SPRG_SCRATCH0,r10 + mtspr SPRN_SPRG_SCRATCH1,r11 mfcr r10 #ifdef CONFIG_PPC_CHRP - mfspr r11,SPRN_SPRG2 + mfspr r11,SPRN_SPRG_RTAS cmpwi 0,r11,0 bne 7f #endif /* CONFIG_PPC_CHRP */ @@ -367,7 +367,7 @@ i##n: \ 7: EXCEPTION_PROLOG_2 addi r3,r1,STACK_FRAME_OVERHEAD #ifdef CONFIG_PPC_CHRP - mfspr r4,SPRN_SPRG2 + mfspr r4,SPRN_SPRG_RTAS cmpwi cr1,r4,0 bne cr1,1f #endif @@ -485,7 +485,7 @@ InstructionTLBMiss: mfspr r3,SPRN_IMISS lis r1,PAGE_OFFSET@h /* check if kernel address */ cmplw 0,r1,r3 - mfspr r2,SPRN_SPRG3 + mfspr r2,SPRN_SPRG_THREAD li r1,_PAGE_USER|_PAGE_PRESENT /* low addresses tested as user */ lwz r2,PGDIR(r2) bge- 112f @@ -559,7 +559,7 @@ DataLoadTLBMiss: mfspr r3,SPRN_DMISS lis r1,PAGE_OFFSET@h /* check if kernel address */ cmplw 0,r1,r3 - mfspr r2,SPRN_SPRG3 + mfspr r2,SPRN_SPRG_THREAD li r1,_PAGE_USER|_PAGE_PRESENT /* low addresses tested as user */ lwz r2,PGDIR(r2) bge- 112f @@ -598,12 +598,12 @@ END_FTR_SECTION_IFCLR(CPU_FTR_NEED_COHERENT) mtcrf 0x80,r2 BEGIN_MMU_FTR_SECTION li r0,1 - mfspr r1,SPRN_SPRG4 + mfspr r1,SPRN_SPRG_603_LRU rlwinm r2,r3,20,27,31 /* Get Address bits 15:19 */ slw r0,r0,r2 xor r1,r0,r1 srw r0,r1,r2 - mtspr SPRN_SPRG4,r1 + mtspr SPRN_SPRG_603_LRU,r1 mfspr r2,SPRN_SRR1 rlwimi r2,r0,31-14,14,14 mtspr SPRN_SRR1,r2 @@ -643,7 +643,7 @@ DataStoreTLBMiss: mfspr r3,SPRN_DMISS lis r1,PAGE_OFFSET@h /* check if kernel address */ cmplw 0,r1,r3 - mfspr r2,SPRN_SPRG3 + mfspr r2,SPRN_SPRG_THREAD li r1,_PAGE_RW|_PAGE_USER|_PAGE_PRESENT /* access flags */ lwz r2,PGDIR(r2) bge- 112f @@ -678,12 +678,12 @@ END_FTR_SECTION_IFCLR(CPU_FTR_NEED_COHERENT) mtcrf 0x80,r2 BEGIN_MMU_FTR_SECTION li r0,1 - mfspr r1,SPRN_SPRG4 + mfspr r1,SPRN_SPRG_603_LRU rlwinm r2,r3,20,27,31 /* Get Address bits 15:19 */ slw r0,r0,r2 xor r1,r0,r1 srw r0,r1,r2 - mtspr SPRN_SPRG4,r1 + mtspr SPRN_SPRG_603_LRU,r1 mfspr r2,SPRN_SRR1 rlwimi r2,r0,31-14,14,14 mtspr SPRN_SRR1,r2 @@ -864,9 +864,9 @@ __secondary_start: tophys(r4,r2) addi r4,r4,THREAD /* phys address of our thread_struct */ CLR_TOP32(r4) - mtspr SPRN_SPRG3,r4 + mtspr SPRN_SPRG_THREAD,r4 li r3,0 - mtspr SPRN_SPRG2,r3 /* 0 => not in RTAS */ + mtspr SPRN_SPRG_RTAS,r3 /* 0 => not in RTAS */ /* enable MMU and jump to start_secondary */ li r4,MSR_KERNEL @@ -947,9 +947,9 @@ start_here: tophys(r4,r2) addi r4,r4,THREAD /* init task's THREAD */ CLR_TOP32(r4) - mtspr SPRN_SPRG3,r4 + mtspr SPRN_SPRG_THREAD,r4 li r3,0 - mtspr SPRN_SPRG2,r3 /* 0 => not in RTAS */ + mtspr SPRN_SPRG_RTAS,r3 /* 0 => not in RTAS */ /* stack */ lis r1,init_thread_union@ha diff --git a/arch/powerpc/kernel/head_40x.S b/arch/powerpc/kernel/head_40x.S index 0c96911d429..a90625f9b48 100644 --- a/arch/powerpc/kernel/head_40x.S +++ b/arch/powerpc/kernel/head_40x.S @@ -103,21 +103,21 @@ _ENTRY(saved_ksp_limit) /* * Exception vector entry code. This code runs with address translation - * turned off (i.e. using physical addresses). We assume SPRG3 has the - * physical address of the current task thread_struct. + * turned off (i.e. using physical addresses). We assume SPRG_THREAD has + * the physical address of the current task thread_struct. * Note that we have to have decremented r1 before we write to any fields * of the exception frame, since a critical interrupt could occur at any * time, and it will write to the area immediately below the current r1. */ #define NORMAL_EXCEPTION_PROLOG \ - mtspr SPRN_SPRG0,r10; /* save two registers to work with */\ - mtspr SPRN_SPRG1,r11; \ - mtspr SPRN_SPRG2,r1; \ + mtspr SPRN_SPRG_SCRATCH0,r10; /* save two registers to work with */\ + mtspr SPRN_SPRG_SCRATCH1,r11; \ + mtspr SPRN_SPRG_SCRATCH2,r1; \ mfcr r10; /* save CR in r10 for now */\ mfspr r11,SPRN_SRR1; /* check whether user or kernel */\ andi. r11,r11,MSR_PR; \ beq 1f; \ - mfspr r1,SPRN_SPRG3; /* if from user, start at top of */\ + mfspr r1,SPRN_SPRG_THREAD; /* if from user, start at top of */\ lwz r1,THREAD_INFO-THREAD(r1); /* this thread's kernel stack */\ addi r1,r1,THREAD_SIZE; \ 1: subi r1,r1,INT_FRAME_SIZE; /* Allocate an exception frame */\ @@ -125,13 +125,13 @@ _ENTRY(saved_ksp_limit) stw r10,_CCR(r11); /* save various registers */\ stw r12,GPR12(r11); \ stw r9,GPR9(r11); \ - mfspr r10,SPRN_SPRG0; \ + mfspr r10,SPRN_SPRG_SCRATCH0; \ stw r10,GPR10(r11); \ - mfspr r12,SPRN_SPRG1; \ + mfspr r12,SPRN_SPRG_SCRATCH1; \ stw r12,GPR11(r11); \ mflr r10; \ stw r10,_LINK(r11); \ - mfspr r10,SPRN_SPRG2; \ + mfspr r10,SPRN_SPRG_SCRATCH2; \ mfspr r12,SPRN_SRR0; \ stw r10,GPR1(r11); \ mfspr r9,SPRN_SRR1; \ @@ -160,7 +160,7 @@ _ENTRY(saved_ksp_limit) lwz r11,critirq_ctx@l(r11); \ beq 1f; \ /* COMING FROM USER MODE */ \ - mfspr r11,SPRN_SPRG3; /* if from user, start at top of */\ + mfspr r11,SPRN_SPRG_THREAD; /* if from user, start at top of */\ lwz r11,THREAD_INFO-THREAD(r11); /* this thread's kernel stack */\ 1: addi r11,r11,THREAD_SIZE-INT_FRAME_SIZE; /* Alloc an excpt frm */\ tophys(r11,r11); \ @@ -265,8 +265,8 @@ label: * and exit. Otherwise, we call heavywight functions to do the work. */ START_EXCEPTION(0x0300, DataStorage) - mtspr SPRN_SPRG0, r10 /* Save some working registers */ - mtspr SPRN_SPRG1, r11 + mtspr SPRN_SPRG_SCRATCH0, r10 /* Save some working registers */ + mtspr SPRN_SPRG_SCRATCH1, r11 #ifdef CONFIG_403GCX stw r12, 0(r0) stw r9, 4(r0) @@ -275,12 +275,12 @@ label: stw r11, 8(r0) stw r12, 12(r0) #else - mtspr SPRN_SPRG4, r12 - mtspr SPRN_SPRG5, r9 + mtspr SPRN_SPRG_SCRATCH3, r12 + mtspr SPRN_SPRG_SCRATCH4, r9 mfcr r11 mfspr r12, SPRN_PID - mtspr SPRN_SPRG7, r11 - mtspr SPRN_SPRG6, r12 + mtspr SPRN_SPRG_SCRATCH6, r11 + mtspr SPRN_SPRG_SCRATCH5, r12 #endif /* First, check if it was a zone fault (which means a user @@ -308,7 +308,7 @@ label: /* Get the PGD for the current thread. */ 3: - mfspr r11,SPRN_SPRG3 + mfspr r11,SPRN_SPRG_THREAD lwz r11,PGDIR(r11) 4: tophys(r11, r11) @@ -355,15 +355,15 @@ label: lwz r9, 4(r0) lwz r12, 0(r0) #else - mfspr r12, SPRN_SPRG6 - mfspr r11, SPRN_SPRG7 + mfspr r12, SPRN_SPRG_SCRATCH5 + mfspr r11, SPRN_SPRG_SCRATCH6 mtspr SPRN_PID, r12 mtcr r11 - mfspr r9, SPRN_SPRG5 - mfspr r12, SPRN_SPRG4 + mfspr r9, SPRN_SPRG_SCRATCH4 + mfspr r12, SPRN_SPRG_SCRATCH3 #endif - mfspr r11, SPRN_SPRG1 - mfspr r10, SPRN_SPRG0 + mfspr r11, SPRN_SPRG_SCRATCH1 + mfspr r10, SPRN_SPRG_SCRATCH0 PPC405_ERR77_SYNC rfi /* Should sync shadow TLBs */ b . /* prevent prefetch past rfi */ @@ -380,15 +380,15 @@ label: lwz r9, 4(r0) lwz r12, 0(r0) #else - mfspr r12, SPRN_SPRG6 - mfspr r11, SPRN_SPRG7 + mfspr r12, SPRN_SPRG_SCRATCH5 + mfspr r11, SPRN_SPRG_SCRATCH6 mtspr SPRN_PID, r12 mtcr r11 - mfspr r9, SPRN_SPRG5 - mfspr r12, SPRN_SPRG4 + mfspr r9, SPRN_SPRG_SCRATCH4 + mfspr r12, SPRN_SPRG_SCRATCH3 #endif - mfspr r11, SPRN_SPRG1 - mfspr r10, SPRN_SPRG0 + mfspr r11, SPRN_SPRG_SCRATCH1 + mfspr r10, SPRN_SPRG_SCRATCH0 b DataAccess /* @@ -466,8 +466,8 @@ label: * load TLB entries from the page table if they exist. */ START_EXCEPTION(0x1100, DTLBMiss) - mtspr SPRN_SPRG0, r10 /* Save some working registers */ - mtspr SPRN_SPRG1, r11 + mtspr SPRN_SPRG_SCRATCH0, r10 /* Save some working registers */ + mtspr SPRN_SPRG_SCRATCH1, r11 #ifdef CONFIG_403GCX stw r12, 0(r0) stw r9, 4(r0) @@ -476,12 +476,12 @@ label: stw r11, 8(r0) stw r12, 12(r0) #else - mtspr SPRN_SPRG4, r12 - mtspr SPRN_SPRG5, r9 + mtspr SPRN_SPRG_SCRATCH3, r12 + mtspr SPRN_SPRG_SCRATCH4, r9 mfcr r11 mfspr r12, SPRN_PID - mtspr SPRN_SPRG7, r11 - mtspr SPRN_SPRG6, r12 + mtspr SPRN_SPRG_SCRATCH6, r11 + mtspr SPRN_SPRG_SCRATCH5, r12 #endif mfspr r10, SPRN_DEAR /* Get faulting address */ @@ -500,7 +500,7 @@ label: /* Get the PGD for the current thread. */ 3: - mfspr r11,SPRN_SPRG3 + mfspr r11,SPRN_SPRG_THREAD lwz r11,PGDIR(r11) 4: tophys(r11, r11) @@ -550,15 +550,15 @@ label: lwz r9, 4(r0) lwz r12, 0(r0) #else - mfspr r12, SPRN_SPRG6 - mfspr r11, SPRN_SPRG7 + mfspr r12, SPRN_SPRG_SCRATCH5 + mfspr r11, SPRN_SPRG_SCRATCH6 mtspr SPRN_PID, r12 mtcr r11 - mfspr r9, SPRN_SPRG5 - mfspr r12, SPRN_SPRG4 + mfspr r9, SPRN_SPRG_SCRATCH4 + mfspr r12, SPRN_SPRG_SCRATCH3 #endif - mfspr r11, SPRN_SPRG1 - mfspr r10, SPRN_SPRG0 + mfspr r11, SPRN_SPRG_SCRATCH1 + mfspr r10, SPRN_SPRG_SCRATCH0 b DataAccess /* 0x1200 - Instruction TLB Miss Exception @@ -566,8 +566,8 @@ label: * registers and bailout to a different point. */ START_EXCEPTION(0x1200, ITLBMiss) - mtspr SPRN_SPRG0, r10 /* Save some working registers */ - mtspr SPRN_SPRG1, r11 + mtspr SPRN_SPRG_SCRATCH0, r10 /* Save some working registers */ + mtspr SPRN_SPRG_SCRATCH1, r11 #ifdef CONFIG_403GCX stw r12, 0(r0) stw r9, 4(r0) @@ -576,12 +576,12 @@ label: stw r11, 8(r0) stw r12, 12(r0) #else - mtspr SPRN_SPRG4, r12 - mtspr SPRN_SPRG5, r9 + mtspr SPRN_SPRG_SCRATCH3, r12 + mtspr SPRN_SPRG_SCRATCH4, r9 mfcr r11 mfspr r12, SPRN_PID - mtspr SPRN_SPRG7, r11 - mtspr SPRN_SPRG6, r12 + mtspr SPRN_SPRG_SCRATCH6, r11 + mtspr SPRN_SPRG_SCRATCH5, r12 #endif mfspr r10, SPRN_SRR0 /* Get faulting address */ @@ -600,7 +600,7 @@ label: /* Get the PGD for the current thread. */ 3: - mfspr r11,SPRN_SPRG3 + mfspr r11,SPRN_SPRG_THREAD lwz r11,PGDIR(r11) 4: tophys(r11, r11) @@ -650,15 +650,15 @@ label: lwz r9, 4(r0) lwz r12, 0(r0) #else - mfspr r12, SPRN_SPRG6 - mfspr r11, SPRN_SPRG7 + mfspr r12, SPRN_SPRG_SCRATCH5 + mfspr r11, SPRN_SPRG_SCRATCH6 mtspr SPRN_PID, r12 mtcr r11 - mfspr r9, SPRN_SPRG5 - mfspr r12, SPRN_SPRG4 + mfspr r9, SPRN_SPRG_SCRATCH4 + mfspr r12, SPRN_SPRG_SCRATCH3 #endif - mfspr r11, SPRN_SPRG1 - mfspr r10, SPRN_SPRG0 + mfspr r11, SPRN_SPRG_SCRATCH1 + mfspr r10, SPRN_SPRG_SCRATCH0 b InstructionAccess EXCEPTION(0x1300, Trap_13, unknown_exception, EXC_XFER_EE) @@ -803,15 +803,15 @@ finish_tlb_load: lwz r9, 4(r0) lwz r12, 0(r0) #else - mfspr r12, SPRN_SPRG6 - mfspr r11, SPRN_SPRG7 + mfspr r12, SPRN_SPRG_SCRATCH5 + mfspr r11, SPRN_SPRG_SCRATCH6 mtspr SPRN_PID, r12 mtcr r11 - mfspr r9, SPRN_SPRG5 - mfspr r12, SPRN_SPRG4 + mfspr r9, SPRN_SPRG_SCRATCH4 + mfspr r12, SPRN_SPRG_SCRATCH3 #endif - mfspr r11, SPRN_SPRG1 - mfspr r10, SPRN_SPRG0 + mfspr r11, SPRN_SPRG_SCRATCH1 + mfspr r10, SPRN_SPRG_SCRATCH0 PPC405_ERR77_SYNC rfi /* Should sync shadow TLBs */ b . /* prevent prefetch past rfi */ @@ -835,7 +835,7 @@ start_here: /* ptr to phys current thread */ tophys(r4,r2) addi r4,r4,THREAD /* init task's THREAD */ - mtspr SPRN_SPRG3,r4 + mtspr SPRN_SPRG_THREAD,r4 /* stack */ lis r1,init_thread_union@ha diff --git a/arch/powerpc/kernel/head_44x.S b/arch/powerpc/kernel/head_44x.S index 18d8a1677c4..656cfb2d666 100644 --- a/arch/powerpc/kernel/head_44x.S +++ b/arch/powerpc/kernel/head_44x.S @@ -239,7 +239,7 @@ skpinv: addi r4,r4,1 /* Increment */ /* ptr to current thread */ addi r4,r2,THREAD /* init task's THREAD */ - mtspr SPRN_SPRG3,r4 + mtspr SPRN_SPRG_THREAD,r4 /* stack */ lis r1,init_thread_union@h @@ -350,12 +350,12 @@ interrupt_base: /* Data TLB Error Interrupt */ START_EXCEPTION(DataTLBError) - mtspr SPRN_SPRG0, r10 /* Save some working registers */ - mtspr SPRN_SPRG1, r11 - mtspr SPRN_SPRG4W, r12 - mtspr SPRN_SPRG5W, r13 + mtspr SPRN_SPRG_WSCRATCH0, r10 /* Save some working registers */ + mtspr SPRN_SPRG_WSCRATCH1, r11 + mtspr SPRN_SPRG_WSCRATCH2, r12 + mtspr SPRN_SPRG_WSCRATCH3, r13 mfcr r11 - mtspr SPRN_SPRG7W, r11 + mtspr SPRN_SPRG_WSCRATCH4, r11 mfspr r10, SPRN_DEAR /* Get faulting address */ /* If we are faulting a kernel address, we have to use the @@ -374,7 +374,7 @@ interrupt_base: /* Get the PGD for the current thread */ 3: - mfspr r11,SPRN_SPRG3 + mfspr r11,SPRN_SPRG_THREAD lwz r11,PGDIR(r11) /* Load PID into MMUCR TID */ @@ -446,12 +446,12 @@ tlb_44x_patch_hwater_D: /* The bailout. Restore registers to pre-exception conditions * and call the heavyweights to help us out. */ - mfspr r11, SPRN_SPRG7R + mfspr r11, SPRN_SPRG_RSCRATCH4 mtcr r11 - mfspr r13, SPRN_SPRG5R - mfspr r12, SPRN_SPRG4R - mfspr r11, SPRN_SPRG1 - mfspr r10, SPRN_SPRG0 + mfspr r13, SPRN_SPRG_RSCRATCH3 + mfspr r12, SPRN_SPRG_RSCRATCH2 + mfspr r11, SPRN_SPRG_RSCRATCH1 + mfspr r10, SPRN_SPRG_RSCRATCH0 b DataStorage /* Instruction TLB Error Interrupt */ @@ -461,12 +461,12 @@ tlb_44x_patch_hwater_D: * to a different point. */ START_EXCEPTION(InstructionTLBError) - mtspr SPRN_SPRG0, r10 /* Save some working registers */ - mtspr SPRN_SPRG1, r11 - mtspr SPRN_SPRG4W, r12 - mtspr SPRN_SPRG5W, r13 + mtspr SPRN_SPRG_WSCRATCH0, r10 /* Save some working registers */ + mtspr SPRN_SPRG_WSCRATCH1, r11 + mtspr SPRN_SPRG_WSCRATCH2, r12 + mtspr SPRN_SPRG_WSCRATCH3, r13 mfcr r11 - mtspr SPRN_SPRG7W, r11 + mtspr SPRN_SPRG_WSCRATCH4, r11 mfspr r10, SPRN_SRR0 /* Get faulting address */ /* If we are faulting a kernel address, we have to use the @@ -485,7 +485,7 @@ tlb_44x_patch_hwater_D: /* Get the PGD for the current thread */ 3: - mfspr r11,SPRN_SPRG3 + mfspr r11,SPRN_SPRG_THREAD lwz r11,PGDIR(r11) /* Load PID into MMUCR TID */ @@ -542,12 +542,12 @@ tlb_44x_patch_hwater_I: /* The bailout. Restore registers to pre-exception conditions * and call the heavyweights to help us out. */ - mfspr r11, SPRN_SPRG7R + mfspr r11, SPRN_SPRG_RSCRATCH4 mtcr r11 - mfspr r13, SPRN_SPRG5R - mfspr r12, SPRN_SPRG4R - mfspr r11, SPRN_SPRG1 - mfspr r10, SPRN_SPRG0 + mfspr r13, SPRN_SPRG_RSCRATCH3 + mfspr r12, SPRN_SPRG_RSCRATCH2 + mfspr r11, SPRN_SPRG_RSCRATCH1 + mfspr r10, SPRN_SPRG_RSCRATCH0 b InstructionStorage /* Debug Interrupt */ @@ -593,12 +593,12 @@ finish_tlb_load: /* Done...restore registers and get out of here. */ - mfspr r11, SPRN_SPRG7R + mfspr r11, SPRN_SPRG_RSCRATCH4 mtcr r11 - mfspr r13, SPRN_SPRG5R - mfspr r12, SPRN_SPRG4R - mfspr r11, SPRN_SPRG1 - mfspr r10, SPRN_SPRG0 + mfspr r13, SPRN_SPRG_RSCRATCH3 + mfspr r12, SPRN_SPRG_RSCRATCH2 + mfspr r11, SPRN_SPRG_RSCRATCH1 + mfspr r10, SPRN_SPRG_RSCRATCH0 rfi /* Force context change */ /* diff --git a/arch/powerpc/kernel/head_64.S b/arch/powerpc/kernel/head_64.S index 9196ef36d43..0552f01041a 100644 --- a/arch/powerpc/kernel/head_64.S +++ b/arch/powerpc/kernel/head_64.S @@ -195,7 +195,7 @@ _GLOBAL(generic_secondary_smp_init) mr r3,r24 /* not found, copy phys to r3 */ b .kexec_wait /* next kernel might do better */ -2: mtspr SPRN_SPRG3,r13 /* Save vaddr of paca in SPRG3 */ +2: mtspr SPRN_SPRG_PACA,r13 /* Save vaddr of paca in an SPRG */ /* From now on, r24 is expected to be logical cpuid */ mr r24,r5 3: HMT_LOW @@ -484,7 +484,7 @@ _GLOBAL(pmac_secondary_start) LOAD_REG_ADDR(r4,paca) /* Get base vaddr of paca array */ mulli r13,r24,PACA_SIZE /* Calculate vaddr of right paca */ add r13,r13,r4 /* for this processor. */ - mtspr SPRN_SPRG3,r13 /* Save vaddr of paca in SPRG3 */ + mtspr SPRN_SPRG_PACA,r13 /* Save vaddr of paca in an SPRG*/ /* Create a temp kernel stack for use before relocation is on. */ ld r1,PACAEMERGSP(r13) @@ -502,10 +502,10 @@ _GLOBAL(pmac_secondary_start) * 1. Processor number * 2. Segment table pointer (virtual address) * On entry the following are set: - * r1 = stack pointer. vaddr for iSeries, raddr (temp stack) for pSeries - * r24 = cpu# (in Linux terms) - * r13 = paca virtual address - * SPRG3 = paca virtual address + * r1 = stack pointer. vaddr for iSeries, raddr (temp stack) for pSeries + * r24 = cpu# (in Linux terms) + * r13 = paca virtual address + * SPRG_PACA = paca virtual address */ .globl __secondary_start __secondary_start: @@ -641,7 +641,7 @@ _INIT_STATIC(start_here_multiplatform) /* Restore parameters passed from prom_init/kexec */ mr r3,r31 - bl .early_setup /* also sets r13 and SPRG3 */ + bl .early_setup /* also sets r13 and SPRG_PACA */ LOAD_REG_ADDR(r3, .start_here_common) ld r4,PACAKMSR(r13) diff --git a/arch/powerpc/kernel/head_8xx.S b/arch/powerpc/kernel/head_8xx.S index 52ff8c53b93..6ded19d0189 100644 --- a/arch/powerpc/kernel/head_8xx.S +++ b/arch/powerpc/kernel/head_8xx.S @@ -110,8 +110,8 @@ turn_on_mmu: * task's thread_struct. */ #define EXCEPTION_PROLOG \ - mtspr SPRN_SPRG0,r10; \ - mtspr SPRN_SPRG1,r11; \ + mtspr SPRN_SPRG_SCRATCH0,r10; \ + mtspr SPRN_SPRG_SCRATCH1,r11; \ mfcr r10; \ EXCEPTION_PROLOG_1; \ EXCEPTION_PROLOG_2 @@ -121,7 +121,7 @@ turn_on_mmu: andi. r11,r11,MSR_PR; \ tophys(r11,r1); /* use tophys(r1) if kernel */ \ beq 1f; \ - mfspr r11,SPRN_SPRG3; \ + mfspr r11,SPRN_SPRG_THREAD; \ lwz r11,THREAD_INFO-THREAD(r11); \ addi r11,r11,THREAD_SIZE; \ tophys(r11,r11); \ @@ -133,9 +133,9 @@ turn_on_mmu: stw r10,_CCR(r11); /* save registers */ \ stw r12,GPR12(r11); \ stw r9,GPR9(r11); \ - mfspr r10,SPRN_SPRG0; \ + mfspr r10,SPRN_SPRG_SCRATCH0; \ stw r10,GPR10(r11); \ - mfspr r12,SPRN_SPRG1; \ + mfspr r12,SPRN_SPRG_SCRATCH1; \ stw r12,GPR11(r11); \ mflr r10; \ stw r10,_LINK(r11); \ @@ -603,8 +603,9 @@ start_here: /* ptr to phys current thread */ tophys(r4,r2) addi r4,r4,THREAD /* init task's THREAD */ - mtspr SPRN_SPRG3,r4 + mtspr SPRN_SPRG_THREAD,r4 li r3,0 + /* XXX What is that for ? SPRG2 appears otherwise unused on 8xx */ mtspr SPRN_SPRG2,r3 /* 0 => r1 has kernel sp */ /* stack */ diff --git a/arch/powerpc/kernel/head_booke.h b/arch/powerpc/kernel/head_booke.h index 5f9febc8d14..50504ae39cb 100644 --- a/arch/powerpc/kernel/head_booke.h +++ b/arch/powerpc/kernel/head_booke.h @@ -20,14 +20,14 @@ #endif #define NORMAL_EXCEPTION_PROLOG \ - mtspr SPRN_SPRG0,r10; /* save two registers to work with */\ - mtspr SPRN_SPRG1,r11; \ - mtspr SPRN_SPRG4W,r1; \ + mtspr SPRN_SPRG_WSCRATCH0,r10;/* save two registers to work with */\ + mtspr SPRN_SPRG_WSCRATCH1,r11; \ + mtspr SPRN_SPRG_WSCRATCH2,r1; \ mfcr r10; /* save CR in r10 for now */\ mfspr r11,SPRN_SRR1; /* check whether user or kernel */\ andi. r11,r11,MSR_PR; \ beq 1f; \ - mfspr r1,SPRN_SPRG3; /* if from user, start at top of */\ + mfspr r1,SPRN_SPRG_THREAD; /* if from user, start at top of */\ lwz r1,THREAD_INFO-THREAD(r1); /* this thread's kernel stack */\ ALLOC_STACK_FRAME(r1, THREAD_SIZE); \ 1: subi r1,r1,INT_FRAME_SIZE; /* Allocate an exception frame */\ @@ -35,13 +35,13 @@ stw r10,_CCR(r11); /* save various registers */\ stw r12,GPR12(r11); \ stw r9,GPR9(r11); \ - mfspr r10,SPRN_SPRG0; \ + mfspr r10,SPRN_SPRG_RSCRATCH0; \ stw r10,GPR10(r11); \ - mfspr r12,SPRN_SPRG1; \ + mfspr r12,SPRN_SPRG_RSCRATCH1; \ stw r12,GPR11(r11); \ mflr r10; \ stw r10,_LINK(r11); \ - mfspr r10,SPRN_SPRG4R; \ + mfspr r10,SPRN_SPRG_RSCRATCH2; \ mfspr r12,SPRN_SRR0; \ stw r10,GPR1(r11); \ mfspr r9,SPRN_SRR1; \ @@ -69,21 +69,11 @@ * providing configurations that micro-optimize space usage. */ -/* CRIT_SPRG only used in critical exception handling */ -#define CRIT_SPRG SPRN_SPRG2 -/* MCHECK_SPRG only used in machine check exception handling */ -#define MCHECK_SPRG SPRN_SPRG6W - -#define MCHECK_STACK_BASE mcheckirq_ctx +#define MC_STACK_BASE mcheckirq_ctx #define CRIT_STACK_BASE critirq_ctx /* only on e500mc/e200 */ -#define DEBUG_STACK_BASE dbgirq_ctx -#ifdef CONFIG_E200 -#define DEBUG_SPRG SPRN_SPRG6W -#else -#define DEBUG_SPRG SPRN_SPRG9 -#endif +#define DBG_STACK_BASE dbgirq_ctx #define EXC_LVL_FRAME_OVERHEAD (THREAD_SIZE - INT_FRAME_SIZE - EXC_LVL_SIZE) @@ -110,7 +100,7 @@ * critical/machine check exception stack at low physical addresses. */ #define EXC_LEVEL_EXCEPTION_PROLOG(exc_level, exc_level_srr0, exc_level_srr1) \ - mtspr exc_level##_SPRG,r8; \ + mtspr SPRN_SPRG_WSCRATCH_##exc_level,r8; \ BOOKE_LOAD_EXC_LEVEL_STACK(exc_level);/* r8 points to the exc_level stack*/ \ stw r9,GPR9(r8); /* save various registers */\ mfcr r9; /* save CR in r9 for now */\ @@ -119,7 +109,7 @@ stw r9,_CCR(r8); /* save CR on stack */\ mfspr r10,exc_level_srr1; /* check whether user or kernel */\ andi. r10,r10,MSR_PR; \ - mfspr r11,SPRN_SPRG3; /* if from user, start at top of */\ + mfspr r11,SPRN_SPRG_THREAD; /* if from user, start at top of */\ lwz r11,THREAD_INFO-THREAD(r11); /* this thread's kernel stack */\ addi r11,r11,EXC_LVL_FRAME_OVERHEAD; /* allocate stack frame */\ beq 1f; \ @@ -140,7 +130,7 @@ lwz r9,TI_TASK-EXC_LVL_FRAME_OVERHEAD(r11); \ stw r9,TI_TASK-EXC_LVL_FRAME_OVERHEAD(r8); \ mr r11,r8; \ -2: mfspr r8,exc_level##_SPRG; \ +2: mfspr r8,SPRN_SPRG_RSCRATCH_##exc_level; \ stw r12,GPR12(r11); /* save various registers */\ mflr r10; \ stw r10,_LINK(r11); \ @@ -161,9 +151,9 @@ #define CRITICAL_EXCEPTION_PROLOG \ EXC_LEVEL_EXCEPTION_PROLOG(CRIT, SPRN_CSRR0, SPRN_CSRR1) #define DEBUG_EXCEPTION_PROLOG \ - EXC_LEVEL_EXCEPTION_PROLOG(DEBUG, SPRN_DSRR0, SPRN_DSRR1) + EXC_LEVEL_EXCEPTION_PROLOG(DBG, SPRN_DSRR0, SPRN_DSRR1) #define MCHECK_EXCEPTION_PROLOG \ - EXC_LEVEL_EXCEPTION_PROLOG(MCHECK, SPRN_MCSRR0, SPRN_MCSRR1) + EXC_LEVEL_EXCEPTION_PROLOG(MC, SPRN_MCSRR0, SPRN_MCSRR1) /* * Exception vectors. @@ -282,13 +272,13 @@ label: mtspr SPRN_DSRR1,r9; \ lwz r9,GPR9(r11); \ lwz r12,GPR12(r11); \ - mtspr DEBUG_SPRG,r8; \ - BOOKE_LOAD_EXC_LEVEL_STACK(DEBUG); /* r8 points to the debug stack */ \ + mtspr SPRN_SPRG_WSCRATCH_DBG,r8; \ + BOOKE_LOAD_EXC_LEVEL_STACK(DBG); /* r8 points to the debug stack */ \ lwz r10,GPR10(r8); \ lwz r11,GPR11(r8); \ - mfspr r8,DEBUG_SPRG; \ + mfspr r8,SPRN_SPRG_RSCRATCH_DBG; \ \ - PPC_RFDI; \ + PPC_RFDI; \ b .; \ \ /* continue normal handling for a debug exception... */ \ @@ -335,11 +325,11 @@ label: mtspr SPRN_CSRR1,r9; \ lwz r9,GPR9(r11); \ lwz r12,GPR12(r11); \ - mtspr CRIT_SPRG,r8; \ + mtspr SPRN_SPRG_WSCRATCH_CRIT,r8; \ BOOKE_LOAD_EXC_LEVEL_STACK(CRIT); /* r8 points to the debug stack */ \ lwz r10,GPR10(r8); \ lwz r11,GPR11(r8); \ - mfspr r8,CRIT_SPRG; \ + mfspr r8,SPRN_SPRG_RSCRATCH_CRIT; \ \ rfci; \ b .; \ diff --git a/arch/powerpc/kernel/head_fsl_booke.S b/arch/powerpc/kernel/head_fsl_booke.S index 5bdcc06d294..eca80482ae7 100644 --- a/arch/powerpc/kernel/head_fsl_booke.S +++ b/arch/powerpc/kernel/head_fsl_booke.S @@ -361,7 +361,7 @@ skpinv: addi r6,r6,1 /* Increment */ /* ptr to current thread */ addi r4,r2,THREAD /* init task's THREAD */ - mtspr SPRN_SPRG3,r4 + mtspr SPRN_SPRG_THREAD,r4 /* stack */ lis r1,init_thread_union@h @@ -532,12 +532,12 @@ interrupt_base: /* Data TLB Error Interrupt */ START_EXCEPTION(DataTLBError) - mtspr SPRN_SPRG0, r10 /* Save some working registers */ - mtspr SPRN_SPRG1, r11 - mtspr SPRN_SPRG4W, r12 - mtspr SPRN_SPRG5W, r13 + mtspr SPRN_SPRG_WSCRATCH0, r10 /* Save some working registers */ + mtspr SPRN_SPRG_WSCRATCH1, r11 + mtspr SPRN_SPRG_WSCRATCH2, r12 + mtspr SPRN_SPRG_WSCRATCH3, r13 mfcr r11 - mtspr SPRN_SPRG7W, r11 + mtspr SPRN_SPRG_WSCRATCH4, r11 mfspr r10, SPRN_DEAR /* Get faulting address */ /* If we are faulting a kernel address, we have to use the @@ -557,7 +557,7 @@ interrupt_base: /* Get the PGD for the current thread */ 3: - mfspr r11,SPRN_SPRG3 + mfspr r11,SPRN_SPRG_THREAD lwz r11,PGDIR(r11) 4: @@ -598,12 +598,12 @@ interrupt_base: /* The bailout. Restore registers to pre-exception conditions * and call the heavyweights to help us out. */ - mfspr r11, SPRN_SPRG7R + mfspr r11, SPRN_SPRG_RSCRATCH4 mtcr r11 - mfspr r13, SPRN_SPRG5R - mfspr r12, SPRN_SPRG4R - mfspr r11, SPRN_SPRG1 - mfspr r10, SPRN_SPRG0 + mfspr r13, SPRN_SPRG_RSCRATCH3 + mfspr r12, SPRN_SPRG_RSCRATCH2 + mfspr r11, SPRN_SPRG_RSCRATCH1 + mfspr r10, SPRN_SPRG_RSCRATCH0 b DataStorage /* Instruction TLB Error Interrupt */ @@ -613,12 +613,12 @@ interrupt_base: * to a different point. */ START_EXCEPTION(InstructionTLBError) - mtspr SPRN_SPRG0, r10 /* Save some working registers */ - mtspr SPRN_SPRG1, r11 - mtspr SPRN_SPRG4W, r12 - mtspr SPRN_SPRG5W, r13 + mtspr SPRN_SPRG_WSCRATCH0, r10 /* Save some working registers */ + mtspr SPRN_SPRG_WSCRATCH1, r11 + mtspr SPRN_SPRG_WSCRATCH2, r12 + mtspr SPRN_SPRG_WSCRATCH3, r13 mfcr r11 - mtspr SPRN_SPRG7W, r11 + mtspr SPRN_SPRG_WSCRATCH4, r11 mfspr r10, SPRN_SRR0 /* Get faulting address */ /* If we are faulting a kernel address, we have to use the @@ -638,7 +638,7 @@ interrupt_base: /* Get the PGD for the current thread */ 3: - mfspr r11,SPRN_SPRG3 + mfspr r11,SPRN_SPRG_THREAD lwz r11,PGDIR(r11) 4: @@ -666,12 +666,12 @@ interrupt_base: /* The bailout. Restore registers to pre-exception conditions * and call the heavyweights to help us out. */ - mfspr r11, SPRN_SPRG7R + mfspr r11, SPRN_SPRG_RSCRATCH4 mtcr r11 - mfspr r13, SPRN_SPRG5R - mfspr r12, SPRN_SPRG4R - mfspr r11, SPRN_SPRG1 - mfspr r10, SPRN_SPRG0 + mfspr r13, SPRN_SPRG_RSCRATCH3 + mfspr r12, SPRN_SPRG_RSCRATCH2 + mfspr r11, SPRN_SPRG_RSCRATCH1 + mfspr r10, SPRN_SPRG_RSCRATCH0 b InstructionStorage #ifdef CONFIG_SPE @@ -790,12 +790,12 @@ END_MMU_FTR_SECTION_IFSET(MMU_FTR_BIG_PHYS) tlbwe /* Done...restore registers and get out of here. */ - mfspr r11, SPRN_SPRG7R + mfspr r11, SPRN_SPRG_RSCRATCH4 mtcr r11 - mfspr r13, SPRN_SPRG5R - mfspr r12, SPRN_SPRG4R - mfspr r11, SPRN_SPRG1 - mfspr r10, SPRN_SPRG0 + mfspr r13, SPRN_SPRG_RSCRATCH3 + mfspr r12, SPRN_SPRG_RSCRATCH2 + mfspr r11, SPRN_SPRG_RSCRATCH1 + mfspr r10, SPRN_SPRG_RSCRATCH0 rfi /* Force context change */ #ifdef CONFIG_SPE @@ -839,7 +839,7 @@ load_up_spe: #endif /* !CONFIG_SMP */ /* enable use of SPE after return */ oris r9,r9,MSR_SPE@h - mfspr r5,SPRN_SPRG3 /* current task's THREAD (phys) */ + mfspr r5,SPRN_SPRG_THREAD /* current task's THREAD (phys) */ li r4,1 li r10,THREAD_ACC stw r4,THREAD_USED_SPE(r5) @@ -1118,7 +1118,7 @@ __secondary_start: /* ptr to current thread */ addi r4,r2,THREAD /* address of our thread_struct */ - mtspr SPRN_SPRG3,r4 + mtspr SPRN_SPRG_THREAD,r4 /* Setup the defaults for TLB entries */ li r4,(MAS4_TSIZED(BOOK3E_PAGESZ_4K))@l diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c index 1f6816003eb..91b89b8d63d 100644 --- a/arch/powerpc/kernel/setup_64.c +++ b/arch/powerpc/kernel/setup_64.c @@ -142,11 +142,11 @@ early_param("smt-enabled", early_smt_enabled); #define check_smt_enabled() #endif /* CONFIG_SMP */ -/* Put the paca pointer into r13 and SPRG3 */ +/* Put the paca pointer into r13 and SPRG_PACA */ void __init setup_paca(int cpu) { local_paca = &paca[cpu]; - mtspr(SPRN_SPRG3, local_paca); + mtspr(SPRN_SPRG_PACA, local_paca); } /* diff --git a/arch/powerpc/kernel/vector.S b/arch/powerpc/kernel/vector.S index ea4d64644d0..67b6916f0e9 100644 --- a/arch/powerpc/kernel/vector.S +++ b/arch/powerpc/kernel/vector.S @@ -65,7 +65,7 @@ _GLOBAL(load_up_altivec) 1: /* enable use of VMX after return */ #ifdef CONFIG_PPC32 - mfspr r5,SPRN_SPRG3 /* current task's THREAD (phys) */ + mfspr r5,SPRN_SPRG_THREAD /* current task's THREAD (phys) */ oris r9,r9,MSR_VEC@h #else ld r4,PACACURRENT(r13) diff --git a/arch/powerpc/kvm/booke_interrupts.S b/arch/powerpc/kvm/booke_interrupts.S index d0c6f841bbd..380a78cf484 100644 --- a/arch/powerpc/kvm/booke_interrupts.S +++ b/arch/powerpc/kvm/booke_interrupts.S @@ -56,8 +56,8 @@ .macro KVM_HANDLER ivor_nr _GLOBAL(kvmppc_handler_\ivor_nr) /* Get pointer to vcpu and record exit number. */ - mtspr SPRN_SPRG0, r4 - mfspr r4, SPRN_SPRG1 + mtspr SPRN_SPRG_WSCRATCH0, r4 + mfspr r4, SPRN_SPRG_RVCPU stw r5, VCPU_GPR(r5)(r4) stw r6, VCPU_GPR(r6)(r4) mfctr r5 @@ -95,7 +95,7 @@ _GLOBAL(kvmppc_handler_len) /* Registers: - * SPRG0: guest r4 + * SPRG_SCRATCH0: guest r4 * r4: vcpu pointer * r5: KVM exit number */ @@ -181,7 +181,7 @@ _GLOBAL(kvmppc_resume_host) stw r3, VCPU_LR(r4) mfxer r3 stw r3, VCPU_XER(r4) - mfspr r3, SPRN_SPRG0 + mfspr r3, SPRN_SPRG_RSCRATCH0 stw r3, VCPU_GPR(r4)(r4) mfspr r3, SPRN_SRR0 stw r3, VCPU_PC(r4) @@ -374,7 +374,7 @@ lightweight_exit: mtspr SPRN_IVPR, r8 /* Save vcpu pointer for the exception handlers. */ - mtspr SPRN_SPRG1, r4 + mtspr SPRN_SPRG_WVCPU, r4 /* Can't switch the stack pointer until after IVPR is switched, * because host interrupt handlers would get confused. */ @@ -384,13 +384,13 @@ lightweight_exit: /* Host interrupt handlers may have clobbered these guest-readable * SPRGs, so we need to reload them here with the guest's values. */ lwz r3, VCPU_SPRG4(r4) - mtspr SPRN_SPRG4, r3 + mtspr SPRN_SPRG4W, r3 lwz r3, VCPU_SPRG5(r4) - mtspr SPRN_SPRG5, r3 + mtspr SPRN_SPRG5W, r3 lwz r3, VCPU_SPRG6(r4) - mtspr SPRN_SPRG6, r3 + mtspr SPRN_SPRG6W, r3 lwz r3, VCPU_SPRG7(r4) - mtspr SPRN_SPRG7, r3 + mtspr SPRN_SPRG7W, r3 #ifdef CONFIG_KVM_EXIT_TIMING /* save enter time */ diff --git a/arch/powerpc/mm/hash_low_32.S b/arch/powerpc/mm/hash_low_32.S index 14af8cedab7..b13d58932bf 100644 --- a/arch/powerpc/mm/hash_low_32.S +++ b/arch/powerpc/mm/hash_low_32.S @@ -40,7 +40,7 @@ mmu_hash_lock: * The address is in r4, and r3 contains an access flag: * _PAGE_RW (0x400) if a write. * r9 contains the SRR1 value, from which we use the MSR_PR bit. - * SPRG3 contains the physical address of the current task's thread. + * SPRG_THREAD contains the physical address of the current task's thread. * * Returns to the caller if the access is illegal or there is no * mapping for the address. Otherwise it places an appropriate PTE @@ -68,7 +68,7 @@ _GLOBAL(hash_page) /* Get PTE (linux-style) and check access */ lis r0,KERNELBASE@h /* check if kernel address */ cmplw 0,r4,r0 - mfspr r8,SPRN_SPRG3 /* current task's THREAD (phys) */ + mfspr r8,SPRN_SPRG_THREAD /* current task's THREAD (phys) */ ori r3,r3,_PAGE_USER|_PAGE_PRESENT /* test low addresses as user */ lwz r5,PGDIR(r8) /* virt page-table root */ blt+ 112f /* assume user more likely */ diff --git a/arch/powerpc/platforms/iseries/exception.S b/arch/powerpc/platforms/iseries/exception.S index 2f581521eb9..2b807597923 100644 --- a/arch/powerpc/platforms/iseries/exception.S +++ b/arch/powerpc/platforms/iseries/exception.S @@ -47,7 +47,7 @@ system_reset_iSeries: LOAD_REG_ADDR(r13, paca) mulli r0,r23,PACA_SIZE add r13,r13,r0 - mtspr SPRN_SPRG3,r13 /* Save it away for the future */ + mtspr SPRN_SPRG_PACA,r13 /* Save it away for the future */ mfmsr r24 ori r24,r24,MSR_RI mtmsrd r24 /* RI on */ @@ -116,7 +116,7 @@ iSeries_secondary_smp_loop: #endif /* CONFIG_SMP */ li r0,-1 /* r0=-1 indicates a Hypervisor call */ sc /* Invoke the hypervisor via a system call */ - mfspr r13,SPRN_SPRG3 /* Put r13 back ???? */ + mfspr r13,SPRN_SPRG_PACA /* Put r13 back ???? */ b 2b /* If SMP not configured, secondaries * loop forever */ @@ -126,9 +126,9 @@ iSeries_secondary_smp_loop: .globl data_access_iSeries data_access_iSeries: - mtspr SPRN_SPRG1,r13 + mtspr SPRN_SPRG_SCRATCH0,r13 BEGIN_FTR_SECTION - mtspr SPRN_SPRG2,r12 + mtspr SPRN_SPRG_SCRATCH1,r12 mfspr r13,SPRN_DAR mfspr r12,SPRN_DSISR srdi r13,r13,60 @@ -137,7 +137,7 @@ BEGIN_FTR_SECTION cmpwi r13,0x2c beq .do_stab_bolted_iSeries mtcrf 0x80,r12 - mfspr r12,SPRN_SPRG2 + mfspr r12,SPRN_SPRG_SCRATCH1 END_FTR_SECTION_IFCLR(CPU_FTR_SLB) EXCEPTION_PROLOG_1(PACA_EXGEN) EXCEPTION_PROLOG_ISERIES_1 @@ -145,15 +145,15 @@ END_FTR_SECTION_IFCLR(CPU_FTR_SLB) .do_stab_bolted_iSeries: mtcrf 0x80,r12 - mfspr r12,SPRN_SPRG2 + mfspr r12,SPRN_SPRG_SCRATCH1 EXCEPTION_PROLOG_1(PACA_EXSLB) EXCEPTION_PROLOG_ISERIES_1 b .do_stab_bolted .globl data_access_slb_iSeries data_access_slb_iSeries: - mtspr SPRN_SPRG1,r13 /* save r13 */ - mfspr r13,SPRN_SPRG3 /* get paca address into r13 */ + mtspr SPRN_SPRG_SCRATCH0,r13 /* save r13 */ + mfspr r13,SPRN_SPRG_PACA /* get paca address into r13 */ std r3,PACA_EXSLB+EX_R3(r13) mfspr r3,SPRN_DAR std r9,PACA_EXSLB+EX_R9(r13) @@ -165,7 +165,7 @@ data_access_slb_iSeries: std r10,PACA_EXSLB+EX_R10(r13) std r11,PACA_EXSLB+EX_R11(r13) std r12,PACA_EXSLB+EX_R12(r13) - mfspr r10,SPRN_SPRG1 + mfspr r10,SPRN_SPRG_SCRATCH0 std r10,PACA_EXSLB+EX_R13(r13) ld r12,PACALPPACAPTR(r13) ld r12,LPPACASRR1(r12) @@ -175,8 +175,8 @@ data_access_slb_iSeries: .globl instruction_access_slb_iSeries instruction_access_slb_iSeries: - mtspr SPRN_SPRG1,r13 /* save r13 */ - mfspr r13,SPRN_SPRG3 /* get paca address into r13 */ + mtspr SPRN_SPRG_SCRATCH0,r13 /* save r13 */ + mfspr r13,SPRN_SPRG_PACA /* get paca address into r13 */ std r3,PACA_EXSLB+EX_R3(r13) ld r3,PACALPPACAPTR(r13) ld r3,LPPACASRR0(r3) /* get SRR0 value */ @@ -189,7 +189,7 @@ instruction_access_slb_iSeries: std r10,PACA_EXSLB+EX_R10(r13) std r11,PACA_EXSLB+EX_R11(r13) std r12,PACA_EXSLB+EX_R12(r13) - mfspr r10,SPRN_SPRG1 + mfspr r10,SPRN_SPRG_SCRATCH0 std r10,PACA_EXSLB+EX_R13(r13) ld r12,PACALPPACAPTR(r13) ld r12,LPPACASRR1(r12) @@ -200,7 +200,7 @@ slb_miss_user_iseries: std r10,PACA_EXGEN+EX_R10(r13) std r11,PACA_EXGEN+EX_R11(r13) std r12,PACA_EXGEN+EX_R12(r13) - mfspr r10,SPRG1 + mfspr r10,SPRG_SCRATCH0 ld r11,PACA_EXSLB+EX_R9(r13) ld r12,PACA_EXSLB+EX_R3(r13) std r10,PACA_EXGEN+EX_R13(r13) @@ -221,7 +221,7 @@ slb_miss_user_iseries: .globl system_call_iSeries system_call_iSeries: mr r9,r13 - mfspr r13,SPRN_SPRG3 + mfspr r13,SPRN_SPRG_PACA EXCEPTION_PROLOG_ISERIES_1 b system_call_common diff --git a/arch/powerpc/platforms/iseries/exception.h b/arch/powerpc/platforms/iseries/exception.h index e26eb86ac73..bae3fba5ad8 100644 --- a/arch/powerpc/platforms/iseries/exception.h +++ b/arch/powerpc/platforms/iseries/exception.h @@ -38,7 +38,7 @@ .globl label##_iSeries; \ label##_iSeries: \ HMT_MEDIUM; \ - mtspr SPRN_SPRG1,r13; /* save r13 */ \ + mtspr SPRN_SPRG_SCRATCH0,r13; /* save r13 */ \ EXCEPTION_PROLOG_1(area); \ EXCEPTION_PROLOG_ISERIES_1; \ b label##_common @@ -47,7 +47,7 @@ label##_iSeries: \ .globl label##_iSeries; \ label##_iSeries: \ HMT_MEDIUM; \ - mtspr SPRN_SPRG1,r13; /* save r13 */ \ + mtspr SPRN_SPRG_SCRATCH0,r13; /* save r13 */ \ EXCEPTION_PROLOG_1(PACA_EXGEN); \ lbz r10,PACASOFTIRQEN(r13); \ cmpwi 0,r10,0; \ -- cgit v1.2.3-70-g09d2 From c5a8c0c99f67ae8a784faafbaaea1529825796e2 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Thu, 16 Jul 2009 19:36:57 +0000 Subject: powerpc: Remove use of a second scratch SPRG in STAB code The STAB code used on Power3 and RS/64 uses a second scratch SPRG to save a GPR in order to decide whether to go to do_stab_bolted_* or to handle a normal data access exception. This prevents our scheme of freeing SPRG3 which is user visible for user uses since we cannot use SPRG0 which, on RS/64, seems to be read-only for supervisor mode (like POWER4). This reworks the STAB exception entry to use the PACA as temporary storage instead. Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/include/asm/exception-64s.h | 7 ++++-- arch/powerpc/include/asm/reg.h | 3 +-- arch/powerpc/kernel/exceptions-64s.S | 38 ++++++++++++++++++++---------- arch/powerpc/platforms/iseries/exception.S | 37 +++++++++++++++++++---------- 4 files changed, 55 insertions(+), 30 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/include/asm/exception-64s.h b/arch/powerpc/include/asm/exception-64s.h index 773e380b5fe..a98653b2623 100644 --- a/arch/powerpc/include/asm/exception-64s.h +++ b/arch/powerpc/include/asm/exception-64s.h @@ -66,8 +66,7 @@ std r9,area+EX_R13(r13); \ mfcr r9 -#define EXCEPTION_PROLOG_PSERIES(area, label) \ - EXCEPTION_PROLOG_1(area); \ +#define EXCEPTION_PROLOG_PSERIES_1(label) \ ld r12,PACAKBASE(r13); /* get high part of &label */ \ ld r10,PACAKMSR(r13); /* get MSR value for kernel */ \ mfspr r11,SPRN_SRR0; /* save SRR0 */ \ @@ -78,6 +77,10 @@ rfid; \ b . /* prevent speculative execution */ +#define EXCEPTION_PROLOG_PSERIES(area, label) \ + EXCEPTION_PROLOG_1(area); \ + EXCEPTION_PROLOG_PSERIES_1(label); + /* * The common exception prolog is used for all except a few exceptions * such as a segment miss on a kernel address. We have to be prepared diff --git a/arch/powerpc/include/asm/reg.h b/arch/powerpc/include/asm/reg.h index a8179cc99ac..d17af2b3d4c 100644 --- a/arch/powerpc/include/asm/reg.h +++ b/arch/powerpc/include/asm/reg.h @@ -654,7 +654,7 @@ * 64-bit server: * - SPRG0 unused (reserved for HV on Power4) * - SPRG1 scratch for exception vectors - * - SPRG2 scratch for exception vectors + * - SPRG2 unused * * All 32-bit: * - SPRG3 current thread_info pointer @@ -707,7 +707,6 @@ #ifdef CONFIG_PPC_BOOK3S_64 #define SPRN_SPRG_SCRATCH0 SPRN_SPRG1 -#define SPRN_SPRG_SCRATCH1 SPRN_SPRG2 #endif #ifdef CONFIG_PPC_BOOK3S_32 diff --git a/arch/powerpc/kernel/exceptions-64s.S b/arch/powerpc/kernel/exceptions-64s.S index 4e9640cc056..50f2ad36ed0 100644 --- a/arch/powerpc/kernel/exceptions-64s.S +++ b/arch/powerpc/kernel/exceptions-64s.S @@ -50,18 +50,28 @@ data_access_pSeries: HMT_MEDIUM mtspr SPRN_SPRG_SCRATCH0,r13 BEGIN_FTR_SECTION - mtspr SPRN_SPRG_SCRATCH1,r12 - mfspr r13,SPRN_DAR - mfspr r12,SPRN_DSISR - srdi r13,r13,60 - rlwimi r13,r12,16,0x20 - mfcr r12 - cmpwi r13,0x2c + mfspr r13,SPRN_SPRG_PACA + std r9,PACA_EXSLB+EX_R9(r13) + std r10,PACA_EXSLB+EX_R10(r13) + mfspr r10,SPRN_DAR + mfspr r9,SPRN_DSISR + srdi r10,r10,60 + rlwimi r10,r9,16,0x20 + mfcr r9 + cmpwi r10,0x2c beq do_stab_bolted_pSeries - mtcrf 0x80,r12 - mfspr r12,SPRN_SPRG_SCRATCH1 -END_FTR_SECTION_IFCLR(CPU_FTR_SLB) + ld r10,PACA_EXSLB+EX_R10(r13) + std r11,PACA_EXGEN+EX_R11(r13) + ld r11,PACA_EXSLB+EX_R9(r13) + std r12,PACA_EXGEN+EX_R12(r13) + mfspr r12,SPRN_SPRG_SCRATCH0 + std r10,PACA_EXGEN+EX_R10(r13) + std r11,PACA_EXGEN+EX_R9(r13) + std r12,PACA_EXGEN+EX_R13(r13) + EXCEPTION_PROLOG_PSERIES_1(data_access_common) +FTR_SECTION_ELSE EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, data_access_common) +ALT_FTR_SECTION_END_IFCLR(CPU_FTR_SLB) . = 0x380 .globl data_access_slb_pSeries @@ -224,9 +234,11 @@ masked_interrupt: .align 7 do_stab_bolted_pSeries: - mtcrf 0x80,r12 - mfspr r12,SPRN_SPRG_SCRATCH1 - EXCEPTION_PROLOG_PSERIES(PACA_EXSLB, .do_stab_bolted) + std r11,PACA_EXSLB+EX_R11(r13) + std r12,PACA_EXSLB+EX_R12(r13) + mfspr r10,SPRN_SPRG_SCRATCH0 + std r10,PACA_EXSLB+EX_R13(r13) + EXCEPTION_PROLOG_PSERIES_1(.do_stab_bolted) #ifdef CONFIG_PPC_PSERIES /* diff --git a/arch/powerpc/platforms/iseries/exception.S b/arch/powerpc/platforms/iseries/exception.S index 2b807597923..5369653dcf6 100644 --- a/arch/powerpc/platforms/iseries/exception.S +++ b/arch/powerpc/platforms/iseries/exception.S @@ -128,25 +128,36 @@ iSeries_secondary_smp_loop: data_access_iSeries: mtspr SPRN_SPRG_SCRATCH0,r13 BEGIN_FTR_SECTION - mtspr SPRN_SPRG_SCRATCH1,r12 - mfspr r13,SPRN_DAR - mfspr r12,SPRN_DSISR - srdi r13,r13,60 - rlwimi r13,r12,16,0x20 - mfcr r12 - cmpwi r13,0x2c + mfspr r13,SPRN_SPRG_PACA + std r9,PACA_EXSLB+EX_R9(r13) + std r10,PACA_EXSLB+EX_R10(r13) + mfspr r10,SPRN_DAR + mfspr r9,SPRN_DSISR + srdi r10,r10,60 + rlwimi r10,r9,16,0x20 + mfcr r9 + cmpwi r10,0x2c beq .do_stab_bolted_iSeries - mtcrf 0x80,r12 - mfspr r12,SPRN_SPRG_SCRATCH1 -END_FTR_SECTION_IFCLR(CPU_FTR_SLB) + ld r10,PACA_EXSLB+EX_R10(r13) + std r11,PACA_EXGEN+EX_R11(r13) + ld r11,PACA_EXSLB+EX_R9(r13) + std r12,PACA_EXGEN+EX_R12(r13) + mfspr r12,SPRN_SPRG_SCRATCH0 + std r10,PACA_EXGEN+EX_R10(r13) + std r11,PACA_EXGEN+EX_R9(r13) + std r12,PACA_EXGEN+EX_R13(r13) + EXCEPTION_PROLOG_ISERIES_1 +FTR_SECTION_ELSE EXCEPTION_PROLOG_1(PACA_EXGEN) EXCEPTION_PROLOG_ISERIES_1 +ALT_FTR_SECTION_END_IFCLR(CPU_FTR_SLB) b data_access_common .do_stab_bolted_iSeries: - mtcrf 0x80,r12 - mfspr r12,SPRN_SPRG_SCRATCH1 - EXCEPTION_PROLOG_1(PACA_EXSLB) + std r11,PACA_EXSLB+EX_R11(r13) + std r12,PACA_EXSLB+EX_R12(r13) + mfspr r10,SPRN_SPRG_SCRATCH0 + std r10,PACA_EXSLB+EX_R13(r13) EXCEPTION_PROLOG_ISERIES_1 b .do_stab_bolted -- cgit v1.2.3-70-g09d2 From 2e2ddb24d36106e029f6eeb3df611178a36fb295 Mon Sep 17 00:00:00 2001 From: roel kluin Date: Tue, 21 Jul 2009 00:17:17 +0000 Subject: powerpc/cell: Replace strncpy by strlcpy Replace strncpy() and explicit null-termination by strlcpy() Signed-off-by: Roel Kluin Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/platforms/cell/celleb_setup.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/platforms/cell/celleb_setup.c b/arch/powerpc/platforms/cell/celleb_setup.c index 07c234f6b2b..e5384557977 100644 --- a/arch/powerpc/platforms/cell/celleb_setup.c +++ b/arch/powerpc/platforms/cell/celleb_setup.c @@ -80,8 +80,7 @@ static void celleb_show_cpuinfo(struct seq_file *m) static int __init celleb_machine_type_hack(char *ptr) { - strncpy(celleb_machine_type, ptr, sizeof(celleb_machine_type)); - celleb_machine_type[sizeof(celleb_machine_type)-1] = 0; + strlcpy(celleb_machine_type, ptr, sizeof(celleb_machine_type)); return 0; } -- cgit v1.2.3-70-g09d2 From 066c4b87e927985a083481c92b4aebade8fe4ab3 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Tue, 21 Jul 2009 15:25:53 +0000 Subject: powerpc/mm: Fix definitions of FORCE_MAX_ZONEORDER in Kconfig The current definitions set ranges and defaults for 32 and 64-bit only using "PPC_STD_MMU" which means hash based MMU. This uselessly restrict the usefulness for the upcoming 64-bit BookE port, but more than that, it's broken on 32-bit since the only 32-bit platform supporting multiple page sizes currently is 44x which does -not- have PPC_STD_MMU_32 set. This fixes it by using PPC64 and PPC32 instead. Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/Kconfig | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index d00131ca083..52349ef1b3a 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -492,16 +492,16 @@ endchoice config FORCE_MAX_ZONEORDER int "Maximum zone order" - range 9 64 if PPC_STD_MMU_64 && PPC_64K_PAGES - default "9" if PPC_STD_MMU_64 && PPC_64K_PAGES - range 13 64 if PPC_STD_MMU_64 && !PPC_64K_PAGES - default "13" if PPC_STD_MMU_64 && !PPC_64K_PAGES - range 9 64 if PPC_STD_MMU_32 && PPC_16K_PAGES - default "9" if PPC_STD_MMU_32 && PPC_16K_PAGES - range 7 64 if PPC_STD_MMU_32 && PPC_64K_PAGES - default "7" if PPC_STD_MMU_32 && PPC_64K_PAGES - range 5 64 if PPC_STD_MMU_32 && PPC_256K_PAGES - default "5" if PPC_STD_MMU_32 && PPC_256K_PAGES + range 9 64 if PPC64 && PPC_64K_PAGES + default "9" if PPC64 && PPC_64K_PAGES + range 13 64 if PPC64 && !PPC_64K_PAGES + default "13" if PPC64 && !PPC_64K_PAGES + range 9 64 if PPC32 && PPC_16K_PAGES + default "9" if PPC32 && PPC_16K_PAGES + range 7 64 if PPC32 && PPC_64K_PAGES + default "7" if PPC32 && PPC_64K_PAGES + range 5 64 if PPC32 && PPC_256K_PAGES + default "5" if PPC32 && PPC_256K_PAGES range 11 64 default "11" help -- cgit v1.2.3-70-g09d2 From 527b3639616b21c257518ee7c26fbf05232db0c0 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Tue, 14 Jul 2009 20:56:58 +0000 Subject: powerpc/pmac: Fix PowerSurge SMP IPI allocation The code for setting up the IPIs for SMP PowerSurge marchines bitrot, it needs to properly map the HW interrupt number Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/platforms/powermac/smp.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/powerpc/platforms/powermac/smp.c b/arch/powerpc/platforms/powermac/smp.c index 6d4da7b46b4..937a38e7317 100644 --- a/arch/powerpc/platforms/powermac/smp.c +++ b/arch/powerpc/platforms/powermac/smp.c @@ -408,7 +408,7 @@ static void __init smp_psurge_setup_cpu(int cpu_nr) /* reset the entry point so if we get another intr we won't * try to startup again */ out_be32(psurge_start, 0x100); - if (setup_irq(30, &psurge_irqaction)) + if (setup_irq(irq_create_mapping(NULL, 30), &psurge_irqaction)) printk(KERN_ERR "Couldn't get primary IPI interrupt"); } -- cgit v1.2.3-70-g09d2 From 063517bea114d4cb57bf582353d0a99b82775a63 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Tue, 14 Jul 2009 20:52:56 +0000 Subject: powerpc: Change PACA from SPRG3 to SPRG1 This change the SPRG used to store the PACA on ppc64 from SPRG3 to SPRG1. SPRG3 is user readable on most processors and we want to use it for other things. We change the scratch SPRG used by exception vectors from SRPG1 to SPRG2. Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/include/asm/reg.h | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/include/asm/reg.h b/arch/powerpc/include/asm/reg.h index d17af2b3d4c..2cedbb42761 100644 --- a/arch/powerpc/include/asm/reg.h +++ b/arch/powerpc/include/asm/reg.h @@ -649,12 +649,12 @@ * SPRG usage: * * All 64-bit: - * - SPRG3 stores PACA pointer + * - SPRG1 stores PACA pointer * * 64-bit server: * - SPRG0 unused (reserved for HV on Power4) - * - SPRG1 scratch for exception vectors - * - SPRG2 unused + * - SPRG2 scratch for exception vectors + * - SPRG3 unused (user visible) * * All 32-bit: * - SPRG3 current thread_info pointer @@ -700,13 +700,13 @@ * */ #ifdef CONFIG_PPC64 -#define SPRN_SPRG_PACA SPRN_SPRG3 +#define SPRN_SPRG_PACA SPRN_SPRG1 #else #define SPRN_SPRG_THREAD SPRN_SPRG3 #endif #ifdef CONFIG_PPC_BOOK3S_64 -#define SPRN_SPRG_SCRATCH0 SPRN_SPRG1 +#define SPRN_SPRG_SCRATCH0 SPRN_SPRG2 #endif #ifdef CONFIG_PPC_BOOK3S_32 -- cgit v1.2.3-70-g09d2 From f7d4f68d971b8234491b4a0be58aa6f659c1c194 Mon Sep 17 00:00:00 2001 From: Frans Pop Date: Thu, 23 Jul 2009 08:57:18 +0000 Subject: powerpc: Makefile simplification through use of cc-ifversion Signed-off-by: Frans Pop Acked-by: Sam Ravnborg Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/powerpc/Makefile b/arch/powerpc/Makefile index bc35f4e2b81..952a3963e9e 100644 --- a/arch/powerpc/Makefile +++ b/arch/powerpc/Makefile @@ -77,7 +77,7 @@ CPP = $(CC) -E $(KBUILD_CFLAGS) CHECKFLAGS += -m$(CONFIG_WORD_SIZE) -D__powerpc__ -D__powerpc$(CONFIG_WORD_SIZE)__ ifeq ($(CONFIG_PPC64),y) -GCC_BROKEN_VEC := $(shell if [ $(call cc-version) -lt 0400 ] ; then echo "y"; fi) +GCC_BROKEN_VEC := $(call cc-ifversion, -lt, 0400, y) ifeq ($(CONFIG_POWER4_ONLY),y) ifeq ($(CONFIG_ALTIVEC),y) -- cgit v1.2.3-70-g09d2 From c79b29735d28d819380b584d6707b4110ee759f3 Mon Sep 17 00:00:00 2001 From: Lucian Adrian Grijincu Date: Thu, 23 Jul 2009 00:13:37 +0000 Subject: powerpc: Update boot wrapper script with the new location of dtc dtc was moved in 9fffb55f66127b52c937ede5196ebfa0c0d50bce from arch/powerpc/boot/ to scripts/dtc/ This patch updates the wrapper script to point to the new location of dtc. Signed-off-by: Lucian Adrian Grijincu Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/boot/wrapper | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/powerpc/boot/wrapper b/arch/powerpc/boot/wrapper index 4db487d1d2a..ac9e9a58b2b 100755 --- a/arch/powerpc/boot/wrapper +++ b/arch/powerpc/boot/wrapper @@ -46,6 +46,7 @@ CROSS= # directory for object and other files used by this script object=arch/powerpc/boot objbin=$object +dtc=scripts/dtc/dtc # directory for working files tmpdir=. @@ -124,7 +125,7 @@ if [ -n "$dts" ]; then if [ -z "$dtb" ]; then dtb="$platform.dtb" fi - $object/dtc -O dtb -o "$dtb" -b 0 "$dts" + $dtc -O dtb -o "$dtb" -b 0 "$dts" fi if [ -z "$kernel" ]; then -- cgit v1.2.3-70-g09d2 From dd90bbd5fb763ab8924135a30956030c7a7b94fc Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Tue, 28 Jul 2009 11:54:32 +1000 Subject: powerpc: Add compat_sys_truncate The truncate syscall has a signed long parameter, so when using a 32- bit userspace with a 64-bit kernel the argument is zero-extended instead of sign-extended. Adding the compat_sys_truncate function fixes the issue. This was noticed during an LSB truncate test failure. The test was checking for the correct error number set when truncate is called with a length of -1. The test can be found at: http://bzr.linuxfoundation.org/lsb/devel/runtime-test?cmd=inventory;rev=stewb%40linux-foundation.org-20090626205411-sfb23cc0tjj7jzgm;path=modules/vsx-pcts/tset/POSIX.os/files/truncate/ BenH: Added compat_sys_ftruncate() as well, same issue. Signed-off-by: Chase Douglas Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/include/asm/systbl.h | 4 ++-- arch/powerpc/kernel/sys_ppc32.c | 12 ++++++++++++ 2 files changed, 14 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/include/asm/systbl.h b/arch/powerpc/include/asm/systbl.h index 370600ca276..ed24bd92fe4 100644 --- a/arch/powerpc/include/asm/systbl.h +++ b/arch/powerpc/include/asm/systbl.h @@ -95,8 +95,8 @@ SYSCALL(reboot) SYSX(sys_ni_syscall,compat_sys_old_readdir,sys_old_readdir) SYSCALL_SPU(mmap) SYSCALL_SPU(munmap) -SYSCALL_SPU(truncate) -SYSCALL_SPU(ftruncate) +COMPAT_SYS_SPU(truncate) +COMPAT_SYS_SPU(ftruncate) SYSCALL_SPU(fchmod) SYSCALL_SPU(fchown) COMPAT_SYS_SPU(getpriority) diff --git a/arch/powerpc/kernel/sys_ppc32.c b/arch/powerpc/kernel/sys_ppc32.c index bb1cfcfdbbb..1cc5e9e5da9 100644 --- a/arch/powerpc/kernel/sys_ppc32.c +++ b/arch/powerpc/kernel/sys_ppc32.c @@ -343,6 +343,18 @@ off_t ppc32_lseek(unsigned int fd, u32 offset, unsigned int origin) return sys_lseek(fd, (int)offset, origin); } +long compat_sys_truncate(const char __user * path, u32 length) +{ + /* sign extend length */ + return sys_truncate(path, (int)length); +} + +long compat_sys_ftruncate(int fd, u32 length) +{ + /* sign extend length */ + return sys_ftruncate(fd, (int)length); +} + /* Note: it is necessary to treat bufsiz as an unsigned int, * with the corresponding cast to a signed int to insure that the * proper conversion (sign extension) between the register representation of a signed int (msr in 32-bit mode) -- cgit v1.2.3-70-g09d2 From 7d60b02cc7e6d67b498eed9ecb58010f61422325 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Thu, 23 Jul 2009 23:15:04 +0000 Subject: powerpc/mm: Fix misplaced #endif in pgtable-ppc64-64k.h A misplaced #endif causes more definitions than intended to be protected by #ifndef __ASSEMBLY__. This breaks upcoming 64-bit BookE support patch when using 64k pages. Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/include/asm/pgtable-ppc64-64k.h | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/include/asm/pgtable-ppc64-64k.h b/arch/powerpc/include/asm/pgtable-ppc64-64k.h index 6cc085b945a..90533ddcd70 100644 --- a/arch/powerpc/include/asm/pgtable-ppc64-64k.h +++ b/arch/powerpc/include/asm/pgtable-ppc64-64k.h @@ -10,10 +10,10 @@ #define PGD_INDEX_SIZE 4 #ifndef __ASSEMBLY__ - #define PTE_TABLE_SIZE (sizeof(real_pte_t) << PTE_INDEX_SIZE) #define PMD_TABLE_SIZE (sizeof(pmd_t) << PMD_INDEX_SIZE) #define PGD_TABLE_SIZE (sizeof(pgd_t) << PGD_INDEX_SIZE) +#endif /* __ASSEMBLY__ */ #define PTRS_PER_PTE (1 << PTE_INDEX_SIZE) #define PTRS_PER_PMD (1 << PMD_INDEX_SIZE) @@ -32,8 +32,6 @@ #define PGDIR_SIZE (1UL << PGDIR_SHIFT) #define PGDIR_MASK (~(PGDIR_SIZE-1)) -#endif /* __ASSEMBLY__ */ - /* Bits to mask out from a PMD to get to the PTE page */ #define PMD_MASKED_BITS 0x1ff /* Bits to mask out from a PGD/PUD to get to the PMD page */ -- cgit v1.2.3-70-g09d2 From 6c1719942e19936044c4673b18afa26e45a02320 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Thu, 23 Jul 2009 23:15:07 +0000 Subject: powerpc/of: Remove useless register save/restore when calling OF back enter_prom() used to save and restore registers such as CTR, XER etc.. which are volatile, or SRR0,1... which we don't care about. This removes a bunch of useless code and while at it turns an mtmsrd into an MTMSRD macro which will be useful to Book3E. Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/entry_64.S | 38 ++++++-------------------------------- 1 file changed, 6 insertions(+), 32 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/kernel/entry_64.S b/arch/powerpc/kernel/entry_64.S index dbf0e311561..1cb0f3d1714 100644 --- a/arch/powerpc/kernel/entry_64.S +++ b/arch/powerpc/kernel/entry_64.S @@ -823,30 +823,17 @@ _GLOBAL(enter_prom) * of all registers that it saves. We therefore save those registers * PROM might touch to the stack. (r0, r3-r13 are caller saved) */ - SAVE_8GPRS(2, r1) + SAVE_GPR(2, r1) SAVE_GPR(13, r1) SAVE_8GPRS(14, r1) SAVE_10GPRS(22, r1) - mfcr r4 - std r4,_CCR(r1) - mfctr r5 - std r5,_CTR(r1) - mfspr r6,SPRN_XER - std r6,_XER(r1) - mfdar r7 - std r7,_DAR(r1) - mfdsisr r8 - std r8,_DSISR(r1) - mfsrr0 r9 - std r9,_SRR0(r1) - mfsrr1 r10 - std r10,_SRR1(r1) + mfcr r10 mfmsr r11 + std r10,_CCR(r1) std r11,_MSR(r1) /* Get the PROM entrypoint */ - ld r0,GPR4(r1) - mtlr r0 + mtlr r4 /* Switch MSR to 32 bits mode */ @@ -860,8 +847,7 @@ _GLOBAL(enter_prom) mtmsrd r11 isync - /* Restore arguments & enter PROM here... */ - ld r3,GPR3(r1) + /* Enter PROM here... */ blrl /* Just make sure that r1 top 32 bits didn't get @@ -871,7 +857,7 @@ _GLOBAL(enter_prom) /* Restore the MSR (back to 64 bits) */ ld r0,_MSR(r1) - mtmsrd r0 + MTMSRD(r0) isync /* Restore other registers */ @@ -881,18 +867,6 @@ _GLOBAL(enter_prom) REST_10GPRS(22, r1) ld r4,_CCR(r1) mtcr r4 - ld r5,_CTR(r1) - mtctr r5 - ld r6,_XER(r1) - mtspr SPRN_XER,r6 - ld r7,_DAR(r1) - mtdar r7 - ld r8,_DSISR(r1) - mtdsisr r8 - ld r9,_SRR0(r1) - mtsrr0 r9 - ld r10,_SRR1(r1) - mtsrr1 r10 addi r1,r1,PROM_FRAME_SIZE ld r0,16(r1) -- cgit v1.2.3-70-g09d2 From fcce810986b3f32a8322faf240f8cc5560a4c463 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Thu, 23 Jul 2009 23:15:10 +0000 Subject: powerpc/mm: Add HW threads support to no_hash TLB management The current "no hash" MMU context management code is written with the assumption that one CPU == one TLB. This is not the case on implementations that support HW multithreading, where several linux CPUs can share the same TLB. This adds some basic support for this to our context management and our TLB flushing code. It also cleans up the optional debugging output a bit Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/include/asm/cputhreads.h | 16 ++++++ arch/powerpc/mm/mmu_context_nohash.c | 93 +++++++++++++++++++++++------------ arch/powerpc/mm/tlb_nohash.c | 10 +++- 3 files changed, 86 insertions(+), 33 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/include/asm/cputhreads.h b/arch/powerpc/include/asm/cputhreads.h index fb11b0c459b..a8e18447c62 100644 --- a/arch/powerpc/include/asm/cputhreads.h +++ b/arch/powerpc/include/asm/cputhreads.h @@ -5,6 +5,15 @@ /* * Mapping of threads to cores + * + * Note: This implementation is limited to a power of 2 number of + * threads per core and the same number for each core in the system + * (though it would work if some processors had less threads as long + * as the CPU numbers are still allocated, just not brought offline). + * + * However, the API allows for a different implementation in the future + * if needed, as long as you only use the functions and not the variables + * directly. */ #ifdef CONFIG_SMP @@ -67,5 +76,12 @@ static inline int cpu_first_thread_in_core(int cpu) return cpu & ~(threads_per_core - 1); } +static inline int cpu_last_thread_in_core(int cpu) +{ + return cpu | (threads_per_core - 1); +} + + + #endif /* _ASM_POWERPC_CPUTHREADS_H */ diff --git a/arch/powerpc/mm/mmu_context_nohash.c b/arch/powerpc/mm/mmu_context_nohash.c index b1a727def15..834436d6d6b 100644 --- a/arch/powerpc/mm/mmu_context_nohash.c +++ b/arch/powerpc/mm/mmu_context_nohash.c @@ -25,10 +25,20 @@ * also clear mm->cpu_vm_mask bits when processes are migrated */ -#undef DEBUG -#define DEBUG_STEAL_ONLY -#undef DEBUG_MAP_CONSISTENCY -/*#define DEBUG_CLAMP_LAST_CONTEXT 15 */ +#define DEBUG_MAP_CONSISTENCY +#define DEBUG_CLAMP_LAST_CONTEXT 31 +//#define DEBUG_HARDER + +/* We don't use DEBUG because it tends to be compiled in always nowadays + * and this would generate way too much output + */ +#ifdef DEBUG_HARDER +#define pr_hard(args...) printk(KERN_DEBUG args) +#define pr_hardcont(args...) printk(KERN_CONT args) +#else +#define pr_hard(args...) do { } while(0) +#define pr_hardcont(args...) do { } while(0) +#endif #include #include @@ -71,7 +81,7 @@ static DEFINE_SPINLOCK(context_lock); static unsigned int steal_context_smp(unsigned int id) { struct mm_struct *mm; - unsigned int cpu, max; + unsigned int cpu, max, i; max = last_context - first_context; @@ -89,15 +99,22 @@ static unsigned int steal_context_smp(unsigned int id) id = first_context; continue; } - pr_devel("[%d] steal context %d from mm @%p\n", - smp_processor_id(), id, mm); + pr_hardcont(" | steal %d from 0x%p", id, mm); /* Mark this mm has having no context anymore */ mm->context.id = MMU_NO_CONTEXT; - /* Mark it stale on all CPUs that used this mm */ - for_each_cpu(cpu, mm_cpumask(mm)) - __set_bit(id, stale_map[cpu]); + /* Mark it stale on all CPUs that used this mm. For threaded + * implementations, we set it on all threads on each core + * represented in the mask. A future implementation will use + * a core map instead but this will do for now. + */ + for_each_cpu(cpu, mm_cpumask(mm)) { + for (i = cpu_first_thread_in_core(cpu); + i <= cpu_last_thread_in_core(cpu); i++) + __set_bit(id, stale_map[i]); + cpu = i - 1; + } return id; } @@ -126,7 +143,7 @@ static unsigned int steal_context_up(unsigned int id) /* Pick up the victim mm */ mm = context_mm[id]; - pr_devel("[%d] steal context %d from mm @%p\n", cpu, id, mm); + pr_hardcont(" | steal %d from 0x%p", id, mm); /* Flush the TLB for that context */ local_flush_tlb_mm(mm); @@ -179,19 +196,14 @@ void switch_mmu_context(struct mm_struct *prev, struct mm_struct *next) /* No lockless fast path .. yet */ spin_lock(&context_lock); -#ifndef DEBUG_STEAL_ONLY - pr_devel("[%d] activating context for mm @%p, active=%d, id=%d\n", - cpu, next, next->context.active, next->context.id); -#endif + pr_hard("[%d] activating context for mm @%p, active=%d, id=%d", + cpu, next, next->context.active, next->context.id); #ifdef CONFIG_SMP /* Mark us active and the previous one not anymore */ next->context.active++; if (prev) { -#ifndef DEBUG_STEAL_ONLY - pr_devel(" old context %p active was: %d\n", - prev, prev->context.active); -#endif + pr_hardcont(" (old=0x%p a=%d)", prev, prev->context.active); WARN_ON(prev->context.active < 1); prev->context.active--; } @@ -201,8 +213,14 @@ void switch_mmu_context(struct mm_struct *prev, struct mm_struct *next) /* If we already have a valid assigned context, skip all that */ id = next->context.id; - if (likely(id != MMU_NO_CONTEXT)) + if (likely(id != MMU_NO_CONTEXT)) { +#ifdef DEBUG_MAP_CONSISTENCY + if (context_mm[id] != next) + pr_err("MMU: mm 0x%p has id %d but context_mm[%d] says 0x%p\n", + next, id, id, context_mm[id]); +#endif goto ctxt_ok; + } /* We really don't have a context, let's try to acquire one */ id = next_context; @@ -235,11 +253,7 @@ void switch_mmu_context(struct mm_struct *prev, struct mm_struct *next) next_context = id + 1; context_mm[id] = next; next->context.id = id; - -#ifndef DEBUG_STEAL_ONLY - pr_devel("[%d] picked up new id %d, nrf is now %d\n", - cpu, id, nr_free_contexts); -#endif + pr_hardcont(" | new id=%d,nrf=%d", id, nr_free_contexts); context_check_map(); ctxt_ok: @@ -248,15 +262,20 @@ void switch_mmu_context(struct mm_struct *prev, struct mm_struct *next) * local TLB for it and unmark it before we use it */ if (test_bit(id, stale_map[cpu])) { - pr_devel("[%d] flushing stale context %d for mm @%p !\n", - cpu, id, next); + pr_hardcont(" | stale flush %d [%d..%d]", + id, cpu_first_thread_in_core(cpu), + cpu_last_thread_in_core(cpu)); + local_flush_tlb_mm(next); /* XXX This clear should ultimately be part of local_flush_tlb_mm */ - __clear_bit(id, stale_map[cpu]); + for (cpu = cpu_first_thread_in_core(cpu); + cpu <= cpu_last_thread_in_core(cpu); cpu++) + __clear_bit(id, stale_map[cpu]); } /* Flick the MMU and release lock */ + pr_hardcont(" -> %d\n", id); set_context(id, next->pgd); spin_unlock(&context_lock); } @@ -266,6 +285,8 @@ void switch_mmu_context(struct mm_struct *prev, struct mm_struct *next) */ int init_new_context(struct task_struct *t, struct mm_struct *mm) { + pr_hard("initing context for mm @%p\n", mm); + mm->context.id = MMU_NO_CONTEXT; mm->context.active = 0; @@ -305,7 +326,9 @@ static int __cpuinit mmu_context_cpu_notify(struct notifier_block *self, unsigned long action, void *hcpu) { unsigned int cpu = (unsigned int)(long)hcpu; - +#ifdef CONFIG_HOTPLUG_CPU + struct task_struct *p; +#endif /* We don't touch CPU 0 map, it's allocated at aboot and kept * around forever */ @@ -324,8 +347,16 @@ static int __cpuinit mmu_context_cpu_notify(struct notifier_block *self, pr_devel("MMU: Freeing stale context map for CPU %d\n", cpu); kfree(stale_map[cpu]); stale_map[cpu] = NULL; - break; -#endif + + /* We also clear the cpu_vm_mask bits of CPUs going away */ + read_lock(&tasklist_lock); + for_each_process(p) { + if (p->mm) + cpu_mask_clear_cpu(cpu, mm_cpumask(p->mm)); + } + read_unlock(&tasklist_lock); + break; +#endif /* CONFIG_HOTPLUG_CPU */ } return NOTIFY_OK; } diff --git a/arch/powerpc/mm/tlb_nohash.c b/arch/powerpc/mm/tlb_nohash.c index ad2eb4d34dd..d908e75cc3b 100644 --- a/arch/powerpc/mm/tlb_nohash.c +++ b/arch/powerpc/mm/tlb_nohash.c @@ -87,6 +87,12 @@ EXPORT_SYMBOL(local_flush_tlb_page); static DEFINE_SPINLOCK(tlbivax_lock); +static int mm_is_core_local(struct mm_struct *mm) +{ + return cpumask_subset(mm_cpumask(mm), + topology_thread_cpumask(smp_processor_id())); +} + struct tlb_flush_param { unsigned long addr; unsigned int pid; @@ -131,7 +137,7 @@ void flush_tlb_mm(struct mm_struct *mm) pid = mm->context.id; if (unlikely(pid == MMU_NO_CONTEXT)) goto no_context; - if (!cpumask_equal(mm_cpumask(mm), cpumask_of(smp_processor_id()))) { + if (!mm_is_core_local(mm)) { struct tlb_flush_param p = { .pid = pid }; /* Ignores smp_processor_id() even if set. */ smp_call_function_many(mm_cpumask(mm), @@ -153,7 +159,7 @@ void flush_tlb_page(struct vm_area_struct *vma, unsigned long vmaddr) if (unlikely(pid == MMU_NO_CONTEXT)) goto bail; cpu_mask = mm_cpumask(vma->vm_mm); - if (!cpumask_equal(cpu_mask, cpumask_of(smp_processor_id()))) { + if (!mm_is_core_local(mm)) { /* If broadcast tlbivax is supported, use it */ if (mmu_has_feature(MMU_FTR_USE_TLBIVAX_BCAST)) { int lock = mmu_has_feature(MMU_FTR_LOCK_BCAST_INVAL); -- cgit v1.2.3-70-g09d2 From 29c09e8fbaf65698c51aeffe34acc284a454a38f Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Thu, 23 Jul 2009 23:15:11 +0000 Subject: powerpc/mm: Add opcode definitions for tlbivax and tlbsrx. This adds the opcode definitions to ppc-opcode.h for the two instructions tlbivax and tlbsrx. as defined by Book3E 2.06 Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/include/asm/ppc-opcode.h | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'arch') diff --git a/arch/powerpc/include/asm/ppc-opcode.h b/arch/powerpc/include/asm/ppc-opcode.h index b74f16d45cb..ef9aa84cac5 100644 --- a/arch/powerpc/include/asm/ppc-opcode.h +++ b/arch/powerpc/include/asm/ppc-opcode.h @@ -48,6 +48,8 @@ #define PPC_INST_TLBIE 0x7c000264 #define PPC_INST_TLBILX 0x7c000024 #define PPC_INST_WAIT 0x7c00007c +#define PPC_INST_TLBIVAX 0x7c000624 +#define PPC_INST_TLBSRX_DOT 0x7c0006a5 /* macros to insert fields into opcodes */ #define __PPC_RA(a) (((a) & 0x1f) << 16) @@ -76,6 +78,10 @@ __PPC_WC(w)) #define PPC_TLBIE(lp,a) stringify_in_c(.long PPC_INST_TLBIE | \ __PPC_RB(a) | __PPC_RS(lp)) +#define PPC_TLBSRX_DOT(a,b) stringify_in_c(.long PPC_INST_TLBSRX_DOT | \ + __PPC_RA(a) | __PPC_RB(b)) +#define PPC_TLBIVAX(a,b) stringify_in_c(.long PPC_INST_TLBIVAX | \ + __PPC_RA(a) | __PPC_RB(b)) /* * Define what the VSX XX1 form instructions will look like, then add -- cgit v1.2.3-70-g09d2 From 1fe1a21005c14ad772caeb9005580f473c4b6c57 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Thu, 23 Jul 2009 23:15:12 +0000 Subject: powerpc/mm: Add more bit definitions for Book3E MMU registers This adds various additional bit definitions for various MMU related SPRs used on Book3E. Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/include/asm/mmu-book3e.h | 168 ++++++++++++++++++++++++---------- 1 file changed, 119 insertions(+), 49 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/include/asm/mmu-book3e.h b/arch/powerpc/include/asm/mmu-book3e.h index 7e74cff81d8..42a39b4aace 100644 --- a/arch/powerpc/include/asm/mmu-book3e.h +++ b/arch/powerpc/include/asm/mmu-book3e.h @@ -38,58 +38,128 @@ #define BOOK3E_PAGESZ_1TB 30 #define BOOK3E_PAGESZ_2TB 31 -#define MAS0_TLBSEL(x) ((x << 28) & 0x30000000) -#define MAS0_ESEL(x) ((x << 16) & 0x0FFF0000) -#define MAS0_NV(x) ((x) & 0x00000FFF) - -#define MAS1_VALID 0x80000000 -#define MAS1_IPROT 0x40000000 -#define MAS1_TID(x) ((x << 16) & 0x3FFF0000) -#define MAS1_IND 0x00002000 -#define MAS1_TS 0x00001000 -#define MAS1_TSIZE(x) ((x << 7) & 0x00000F80) - -#define MAS2_EPN 0xFFFFF000 -#define MAS2_X0 0x00000040 -#define MAS2_X1 0x00000020 -#define MAS2_W 0x00000010 -#define MAS2_I 0x00000008 -#define MAS2_M 0x00000004 -#define MAS2_G 0x00000002 -#define MAS2_E 0x00000001 +/* MAS registers bit definitions */ + +#define MAS0_TLBSEL(x) ((x << 28) & 0x30000000) +#define MAS0_ESEL(x) ((x << 16) & 0x0FFF0000) +#define MAS0_NV(x) ((x) & 0x00000FFF) +#define MAS0_HES 0x00004000 +#define MAS0_WQ_ALLWAYS 0x00000000 +#define MAS0_WQ_COND 0x00001000 +#define MAS0_WQ_CLR_RSRV 0x00002000 + +#define MAS1_VALID 0x80000000 +#define MAS1_IPROT 0x40000000 +#define MAS1_TID(x) ((x << 16) & 0x3FFF0000) +#define MAS1_IND 0x00002000 +#define MAS1_TS 0x00001000 +#define MAS1_TSIZE_MASK 0x00000f80 +#define MAS1_TSIZE_SHIFT 7 +#define MAS1_TSIZE(x) ((x << MAS1_TSIZE_SHIFT) & MAS1_TSIZE_MASK) + +#define MAS2_EPN 0xFFFFF000 +#define MAS2_X0 0x00000040 +#define MAS2_X1 0x00000020 +#define MAS2_W 0x00000010 +#define MAS2_I 0x00000008 +#define MAS2_M 0x00000004 +#define MAS2_G 0x00000002 +#define MAS2_E 0x00000001 #define MAS2_EPN_MASK(size) (~0 << (size + 10)) #define MAS2_VAL(addr, size, flags) ((addr) & MAS2_EPN_MASK(size) | (flags)) -#define MAS3_RPN 0xFFFFF000 -#define MAS3_U0 0x00000200 -#define MAS3_U1 0x00000100 -#define MAS3_U2 0x00000080 -#define MAS3_U3 0x00000040 -#define MAS3_UX 0x00000020 -#define MAS3_SX 0x00000010 -#define MAS3_UW 0x00000008 -#define MAS3_SW 0x00000004 -#define MAS3_UR 0x00000002 -#define MAS3_SR 0x00000001 - -#define MAS4_TLBSELD(x) MAS0_TLBSEL(x) -#define MAS4_INDD 0x00008000 -#define MAS4_TSIZED(x) MAS1_TSIZE(x) -#define MAS4_X0D 0x00000040 -#define MAS4_X1D 0x00000020 -#define MAS4_WD 0x00000010 -#define MAS4_ID 0x00000008 -#define MAS4_MD 0x00000004 -#define MAS4_GD 0x00000002 -#define MAS4_ED 0x00000001 - -#define MAS6_SPID0 0x3FFF0000 -#define MAS6_SPID1 0x00007FFE -#define MAS6_ISIZE(x) MAS1_TSIZE(x) -#define MAS6_SAS 0x00000001 -#define MAS6_SPID MAS6_SPID0 - -#define MAS7_RPN 0xFFFFFFFF +#define MAS3_RPN 0xFFFFF000 +#define MAS3_U0 0x00000200 +#define MAS3_U1 0x00000100 +#define MAS3_U2 0x00000080 +#define MAS3_U3 0x00000040 +#define MAS3_UX 0x00000020 +#define MAS3_SX 0x00000010 +#define MAS3_UW 0x00000008 +#define MAS3_SW 0x00000004 +#define MAS3_UR 0x00000002 +#define MAS3_SR 0x00000001 +#define MAS3_SPSIZE 0x0000003e +#define MAS3_SPSIZE_SHIFT 1 + +#define MAS4_TLBSELD(x) MAS0_TLBSEL(x) +#define MAS4_INDD 0x00008000 /* Default IND */ +#define MAS4_TSIZED(x) MAS1_TSIZE(x) +#define MAS4_X0D 0x00000040 +#define MAS4_X1D 0x00000020 +#define MAS4_WD 0x00000010 +#define MAS4_ID 0x00000008 +#define MAS4_MD 0x00000004 +#define MAS4_GD 0x00000002 +#define MAS4_ED 0x00000001 +#define MAS4_WIMGED_MASK 0x0000001f /* Default WIMGE */ +#define MAS4_WIMGED_SHIFT 0 +#define MAS4_VLED MAS4_X1D /* Default VLE */ +#define MAS4_ACMD 0x000000c0 /* Default ACM */ +#define MAS4_ACMD_SHIFT 6 +#define MAS4_TSIZED_MASK 0x00000f80 /* Default TSIZE */ +#define MAS4_TSIZED_SHIFT 7 + +#define MAS6_SPID0 0x3FFF0000 +#define MAS6_SPID1 0x00007FFE +#define MAS6_ISIZE(x) MAS1_TSIZE(x) +#define MAS6_SAS 0x00000001 +#define MAS6_SPID MAS6_SPID0 +#define MAS6_SIND 0x00000002 /* Indirect page */ +#define MAS6_SIND_SHIFT 1 +#define MAS6_SPID_MASK 0x3fff0000 +#define MAS6_SPID_SHIFT 16 +#define MAS6_ISIZE_MASK 0x00000f80 +#define MAS6_ISIZE_SHIFT 7 + +#define MAS7_RPN 0xFFFFFFFF + +/* TLBnCFG encoding */ +#define TLBnCFG_N_ENTRY 0x00000fff /* number of entries */ +#define TLBnCFG_HES 0x00002000 /* HW select supported */ +#define TLBnCFG_IPROT 0x00008000 /* IPROT supported */ +#define TLBnCFG_GTWE 0x00010000 /* Guest can write */ +#define TLBnCFG_IND 0x00020000 /* IND entries supported */ +#define TLBnCFG_PT 0x00040000 /* Can load from page table */ +#define TLBnCFG_ASSOC 0xff000000 /* Associativity */ + +/* TLBnPS encoding */ +#define TLBnPS_4K 0x00000004 +#define TLBnPS_8K 0x00000008 +#define TLBnPS_16K 0x00000010 +#define TLBnPS_32K 0x00000020 +#define TLBnPS_64K 0x00000040 +#define TLBnPS_128K 0x00000080 +#define TLBnPS_256K 0x00000100 +#define TLBnPS_512K 0x00000200 +#define TLBnPS_1M 0x00000400 +#define TLBnPS_2M 0x00000800 +#define TLBnPS_4M 0x00001000 +#define TLBnPS_8M 0x00002000 +#define TLBnPS_16M 0x00004000 +#define TLBnPS_32M 0x00008000 +#define TLBnPS_64M 0x00010000 +#define TLBnPS_128M 0x00020000 +#define TLBnPS_256M 0x00040000 +#define TLBnPS_512M 0x00080000 +#define TLBnPS_1G 0x00100000 +#define TLBnPS_2G 0x00200000 +#define TLBnPS_4G 0x00400000 +#define TLBnPS_8G 0x00800000 +#define TLBnPS_16G 0x01000000 +#define TLBnPS_32G 0x02000000 +#define TLBnPS_64G 0x04000000 +#define TLBnPS_128G 0x08000000 +#define TLBnPS_256G 0x10000000 + +/* tlbilx action encoding */ +#define TLBILX_T_ALL 0 +#define TLBILX_T_TID 1 +#define TLBILX_T_FULLMATCH 3 +#define TLBILX_T_CLASS0 4 +#define TLBILX_T_CLASS1 5 +#define TLBILX_T_CLASS2 6 +#define TLBILX_T_CLASS3 7 #ifndef __ASSEMBLY__ -- cgit v1.2.3-70-g09d2 From a245067e204f69c69abf92d94fc45ec65bf1f07e Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Thu, 23 Jul 2009 23:15:16 +0000 Subject: powerpc/mm: Add support for early ioremap on non-hash 64-bit processors This adds some code to do early ioremap's using page tables instead of bolting entries in the hash table. This will be used by the upcoming 64-bits BookE port. The patch also changes the test for early vs. late ioremap to use slab_is_available() instead of our old hackish mem_init_done. Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/mm/pgtable_64.c | 59 ++++++++++++++++++++++++++++++++++++++++---- 1 file changed, 54 insertions(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/mm/pgtable_64.c b/arch/powerpc/mm/pgtable_64.c index bfa7db6b2fd..93ed1a3c872 100644 --- a/arch/powerpc/mm/pgtable_64.c +++ b/arch/powerpc/mm/pgtable_64.c @@ -33,6 +33,8 @@ #include #include #include +#include +#include #include #include @@ -55,19 +57,36 @@ unsigned long ioremap_bot = IOREMAP_BASE; + +#ifdef CONFIG_PPC_MMU_NOHASH +static void *early_alloc_pgtable(unsigned long size) +{ + void *pt; + + if (init_bootmem_done) + pt = __alloc_bootmem(size, size, __pa(MAX_DMA_ADDRESS)); + else + pt = __va(lmb_alloc_base(size, size, + __pa(MAX_DMA_ADDRESS))); + memset(pt, 0, size); + + return pt; +} +#endif /* CONFIG_PPC_MMU_NOHASH */ + /* - * map_io_page currently only called by __ioremap - * map_io_page adds an entry to the ioremap page table + * map_kernel_page currently only called by __ioremap + * map_kernel_page adds an entry to the ioremap page table * and adds an entry to the HPT, possibly bolting it */ -static int map_io_page(unsigned long ea, unsigned long pa, int flags) +static int map_kernel_page(unsigned long ea, unsigned long pa, int flags) { pgd_t *pgdp; pud_t *pudp; pmd_t *pmdp; pte_t *ptep; - if (mem_init_done) { + if (slab_is_available()) { pgdp = pgd_offset_k(ea); pudp = pud_alloc(&init_mm, pgdp, ea); if (!pudp) @@ -81,6 +100,35 @@ static int map_io_page(unsigned long ea, unsigned long pa, int flags) set_pte_at(&init_mm, ea, ptep, pfn_pte(pa >> PAGE_SHIFT, __pgprot(flags))); } else { +#ifdef CONFIG_PPC_MMU_NOHASH + /* Warning ! This will blow up if bootmem is not initialized + * which our ppc64 code is keen to do that, we'll need to + * fix it and/or be more careful + */ + pgdp = pgd_offset_k(ea); +#ifdef PUD_TABLE_SIZE + if (pgd_none(*pgdp)) { + pudp = early_alloc_pgtable(PUD_TABLE_SIZE); + BUG_ON(pudp == NULL); + pgd_populate(&init_mm, pgdp, pudp); + } +#endif /* PUD_TABLE_SIZE */ + pudp = pud_offset(pgdp, ea); + if (pud_none(*pudp)) { + pmdp = early_alloc_pgtable(PMD_TABLE_SIZE); + BUG_ON(pmdp == NULL); + pud_populate(&init_mm, pudp, pmdp); + } + pmdp = pmd_offset(pudp, ea); + if (!pmd_present(*pmdp)) { + ptep = early_alloc_pgtable(PAGE_SIZE); + BUG_ON(ptep == NULL); + pmd_populate_kernel(&init_mm, pmdp, ptep); + } + ptep = pte_offset_kernel(pmdp, ea); + set_pte_at(&init_mm, ea, ptep, pfn_pte(pa >> PAGE_SHIFT, + __pgprot(flags))); +#else /* CONFIG_PPC_MMU_NOHASH */ /* * If the mm subsystem is not fully up, we cannot create a * linux page table entry for this mapping. Simply bolt an @@ -93,6 +141,7 @@ static int map_io_page(unsigned long ea, unsigned long pa, int flags) "memory at %016lx !\n", pa); return -ENOMEM; } +#endif /* !CONFIG_PPC_MMU_NOHASH */ } return 0; } @@ -124,7 +173,7 @@ void __iomem * __ioremap_at(phys_addr_t pa, void *ea, unsigned long size, WARN_ON(size & ~PAGE_MASK); for (i = 0; i < size; i += PAGE_SIZE) - if (map_io_page((unsigned long)ea+i, pa+i, flags)) + if (map_kernel_page((unsigned long)ea+i, pa+i, flags)) return NULL; return (void __iomem *)ea; -- cgit v1.2.3-70-g09d2 From 44c58ccc8dc25f78a4f641901f17092c93dd0458 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Thu, 23 Jul 2009 23:15:20 +0000 Subject: powerpc: Modify some ppc_asm.h macros to accomodate 64-bits Book3E The way I intend to use tophys/tovirt on 64-bit BookE is different from the "trick" that we currently play for 32-bit BookE so change the condition of definition of these macros to make it so. Also, make sure we only use rfid and mtmsrd instead of rfi and mtmsr for 64-bit server processors, not all 64-bit processors. Signed-off-by: Benjamin Herrenschmidt Acked-by: Kumar Gala --- arch/powerpc/include/asm/ppc_asm.h | 14 ++++++++++---- 1 file changed, 10 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/include/asm/ppc_asm.h b/arch/powerpc/include/asm/ppc_asm.h index f9729529c20..dfae6e916df 100644 --- a/arch/powerpc/include/asm/ppc_asm.h +++ b/arch/powerpc/include/asm/ppc_asm.h @@ -375,8 +375,15 @@ END_FTR_SECTION_IFCLR(CPU_FTR_601) #define PPC440EP_ERR42 #endif - -#if defined(CONFIG_BOOKE) +/* + * toreal/fromreal/tophys/tovirt macros. 32-bit BookE makes them + * keep the address intact to be compatible with code shared with + * 32-bit classic. + * + * On the other hand, I find it useful to have them behave as expected + * by their name (ie always do the addition) on 64-bit BookE + */ +#if defined(CONFIG_BOOKE) && !defined(CONFIG_PPC64) #define toreal(rd) #define fromreal(rd) @@ -426,10 +433,9 @@ END_FTR_SECTION_IFCLR(CPU_FTR_601) .previous #endif -#ifdef CONFIG_PPC64 +#ifdef CONFIG_PPC_BOOK3S_64 #define RFI rfid #define MTMSRD(r) mtmsrd r - #else #define FIX_SRR1(ra, rb) #ifndef CONFIG_40x -- cgit v1.2.3-70-g09d2 From d4e167da4cb60910f6ac305aee03714937f70b71 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Thu, 23 Jul 2009 23:15:24 +0000 Subject: powerpc/mm: Make low level TLB flush ops on BookE take additional args We need to pass down whether the page is direct or indirect and we'll need to pass the page size to _tlbil_va and _tlbivax_bcast We also add a new low level _tlbil_pid_noind() which does a TLB flush by PID but avoids flushing indirect entries if possible This implements those new prototypes but defines them with inlines or macros so that no additional arguments are actually passed on current processors. Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/include/asm/tlbflush.h | 11 ++++++++-- arch/powerpc/mm/mmu_decl.h | 16 +++++++++++--- arch/powerpc/mm/tlb_nohash.c | 42 +++++++++++++++++++++++++++---------- arch/powerpc/mm/tlb_nohash_low.S | 6 +++--- 4 files changed, 56 insertions(+), 19 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/include/asm/tlbflush.h b/arch/powerpc/include/asm/tlbflush.h index abbe3419d1d..d50a380b2b6 100644 --- a/arch/powerpc/include/asm/tlbflush.h +++ b/arch/powerpc/include/asm/tlbflush.h @@ -6,7 +6,7 @@ * * - flush_tlb_mm(mm) flushes the specified mm context TLB's * - flush_tlb_page(vma, vmaddr) flushes one page - * - local_flush_tlb_mm(mm) flushes the specified mm context on + * - local_flush_tlb_mm(mm, full) flushes the specified mm context on * the local processor * - local_flush_tlb_page(vma, vmaddr) flushes one page on the local processor * - flush_tlb_page_nohash(vma, vmaddr) flushes one page if SW loaded TLB @@ -29,7 +29,8 @@ * specific tlbie's */ -#include +struct vm_area_struct; +struct mm_struct; #define MMU_NO_CONTEXT ((unsigned int)-1) @@ -40,12 +41,18 @@ extern void flush_tlb_kernel_range(unsigned long start, unsigned long end); extern void local_flush_tlb_mm(struct mm_struct *mm); extern void local_flush_tlb_page(struct vm_area_struct *vma, unsigned long vmaddr); +extern void __local_flush_tlb_page(struct mm_struct *mm, unsigned long vmaddr, + int tsize, int ind); + #ifdef CONFIG_SMP extern void flush_tlb_mm(struct mm_struct *mm); extern void flush_tlb_page(struct vm_area_struct *vma, unsigned long vmaddr); +extern void __flush_tlb_page(struct mm_struct *mm, unsigned long vmaddr, + int tsize, int ind); #else #define flush_tlb_mm(mm) local_flush_tlb_mm(mm) #define flush_tlb_page(vma,addr) local_flush_tlb_page(vma,addr) +#define __flush_tlb_page(mm,addr,p,i) __local_flush_tlb_page(mm,addr,p,i) #endif #define flush_tlb_page_nohash(vma,addr) flush_tlb_page(vma,addr) diff --git a/arch/powerpc/mm/mmu_decl.h b/arch/powerpc/mm/mmu_decl.h index d1f9c62dc17..3871dceee2d 100644 --- a/arch/powerpc/mm/mmu_decl.h +++ b/arch/powerpc/mm/mmu_decl.h @@ -36,21 +36,30 @@ static inline void _tlbil_pid(unsigned int pid) { asm volatile ("sync; tlbia; isync" : : : "memory"); } +#define _tlbil_pid_noind(pid) _tlbil_pid(pid) + #else /* CONFIG_40x || CONFIG_8xx */ extern void _tlbil_all(void); extern void _tlbil_pid(unsigned int pid); +#define _tlbil_pid_noind(pid) _tlbil_pid(pid) #endif /* !(CONFIG_40x || CONFIG_8xx) */ /* * On 8xx, we directly inline tlbie, on others, it's extern */ #ifdef CONFIG_8xx -static inline void _tlbil_va(unsigned long address, unsigned int pid) +static inline void _tlbil_va(unsigned long address, unsigned int pid, + unsigned int tsize, unsigned int ind) { asm volatile ("tlbie %0; sync" : : "r" (address) : "memory"); } #else /* CONFIG_8xx */ -extern void _tlbil_va(unsigned long address, unsigned int pid); +extern void __tlbil_va(unsigned long address, unsigned int pid); +static inline void _tlbil_va(unsigned long address, unsigned int pid, + unsigned int tsize, unsigned int ind) +{ + __tlbil_va(address, pid); +} #endif /* CONIFG_8xx */ /* @@ -58,7 +67,8 @@ extern void _tlbil_va(unsigned long address, unsigned int pid); * implementation. When that becomes the case, this will be * an extern. */ -static inline void _tlbivax_bcast(unsigned long address, unsigned int pid) +static inline void _tlbivax_bcast(unsigned long address, unsigned int pid, + unsigned int tsize, unsigned int ind) { BUG(); } diff --git a/arch/powerpc/mm/tlb_nohash.c b/arch/powerpc/mm/tlb_nohash.c index d908e75cc3b..761e8882416 100644 --- a/arch/powerpc/mm/tlb_nohash.c +++ b/arch/powerpc/mm/tlb_nohash.c @@ -67,18 +67,24 @@ void local_flush_tlb_mm(struct mm_struct *mm) } EXPORT_SYMBOL(local_flush_tlb_mm); -void local_flush_tlb_page(struct vm_area_struct *vma, unsigned long vmaddr) +void __local_flush_tlb_page(struct mm_struct *mm, unsigned long vmaddr, + int tsize, int ind) { unsigned int pid; preempt_disable(); - pid = vma ? vma->vm_mm->context.id : 0; + pid = mm ? mm->context.id : 0; if (pid != MMU_NO_CONTEXT) - _tlbil_va(vmaddr, pid); + _tlbil_va(vmaddr, pid, tsize, ind); preempt_enable(); } -EXPORT_SYMBOL(local_flush_tlb_page); +void local_flush_tlb_page(struct vm_area_struct *vma, unsigned long vmaddr) +{ + __local_flush_tlb_page(vma ? vma->vm_mm : NULL, vmaddr, + 0 /* tsize unused for now */, 0); +} +EXPORT_SYMBOL(local_flush_tlb_page); /* * And here are the SMP non-local implementations @@ -96,6 +102,8 @@ static int mm_is_core_local(struct mm_struct *mm) struct tlb_flush_param { unsigned long addr; unsigned int pid; + unsigned int tsize; + unsigned int ind; }; static void do_flush_tlb_mm_ipi(void *param) @@ -109,7 +117,7 @@ static void do_flush_tlb_page_ipi(void *param) { struct tlb_flush_param *p = param; - _tlbil_va(p->addr, p->pid); + _tlbil_va(p->addr, p->pid, p->tsize, p->ind); } @@ -149,37 +157,49 @@ void flush_tlb_mm(struct mm_struct *mm) } EXPORT_SYMBOL(flush_tlb_mm); -void flush_tlb_page(struct vm_area_struct *vma, unsigned long vmaddr) +void __flush_tlb_page(struct mm_struct *mm, unsigned long vmaddr, + int tsize, int ind) { struct cpumask *cpu_mask; unsigned int pid; preempt_disable(); - pid = vma ? vma->vm_mm->context.id : 0; + pid = mm ? mm->context.id : 0; if (unlikely(pid == MMU_NO_CONTEXT)) goto bail; - cpu_mask = mm_cpumask(vma->vm_mm); + cpu_mask = mm_cpumask(mm); if (!mm_is_core_local(mm)) { /* If broadcast tlbivax is supported, use it */ if (mmu_has_feature(MMU_FTR_USE_TLBIVAX_BCAST)) { int lock = mmu_has_feature(MMU_FTR_LOCK_BCAST_INVAL); if (lock) spin_lock(&tlbivax_lock); - _tlbivax_bcast(vmaddr, pid); + _tlbivax_bcast(vmaddr, pid, tsize, ind); if (lock) spin_unlock(&tlbivax_lock); goto bail; } else { - struct tlb_flush_param p = { .pid = pid, .addr = vmaddr }; + struct tlb_flush_param p = { + .pid = pid, + .addr = vmaddr, + .tsize = tsize, + .ind = ind, + }; /* Ignores smp_processor_id() even if set in cpu_mask */ smp_call_function_many(cpu_mask, do_flush_tlb_page_ipi, &p, 1); } } - _tlbil_va(vmaddr, pid); + _tlbil_va(vmaddr, pid, tsize, ind); bail: preempt_enable(); } + +void flush_tlb_page(struct vm_area_struct *vma, unsigned long vmaddr) +{ + __flush_tlb_page(vma ? vma->vm_mm : NULL, vmaddr, + 0 /* tsize unused for now */, 0); +} EXPORT_SYMBOL(flush_tlb_page); #endif /* CONFIG_SMP */ diff --git a/arch/powerpc/mm/tlb_nohash_low.S b/arch/powerpc/mm/tlb_nohash_low.S index 3037911279b..c7d89a0adba 100644 --- a/arch/powerpc/mm/tlb_nohash_low.S +++ b/arch/powerpc/mm/tlb_nohash_low.S @@ -39,7 +39,7 @@ /* * 40x implementation needs only tlbil_va */ -_GLOBAL(_tlbil_va) +_GLOBAL(__tlbil_va) /* We run the search with interrupts disabled because we have to change * the PID and I don't want to preempt when that happens. */ @@ -71,7 +71,7 @@ _GLOBAL(_tlbil_va) * 440 implementation uses tlbsx/we for tlbil_va and a full sweep * of the TLB for everything else. */ -_GLOBAL(_tlbil_va) +_GLOBAL(__tlbil_va) mfspr r5,SPRN_MMUCR rlwimi r5,r4,0,24,31 /* Set TID */ @@ -170,7 +170,7 @@ ALT_MMU_FTR_SECTION_END_IFSET(MMU_FTR_USE_TLBILX) * Flush MMU TLB for a particular address, but only on the local processor * (no broadcast) */ -_GLOBAL(_tlbil_va) +_GLOBAL(__tlbil_va) mfmsr r10 wrteei 0 slwi r4,r4,16 -- cgit v1.2.3-70-g09d2 From 6f0ef0f505af1ce6e9756087a9d4cc3778bae8c6 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Thu, 23 Jul 2009 23:15:26 +0000 Subject: powerpc/mm: Call mmu_context_init() from ppc64 Our 64-bit hash context handling has no init function, but 64-bit Book3E will use the common mmu_context_nohash.c code which does, so define an empty inline mmu_context_init() for 64-bit server and call it from our 64-bit setup_arch() Signed-off-by: Benjamin Herrenschmidt Acked-by: Kumar Gala --- arch/powerpc/include/asm/mmu_context.h | 7 ++++++- arch/powerpc/kernel/setup_64.c | 4 ++++ 2 files changed, 10 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/powerpc/include/asm/mmu_context.h b/arch/powerpc/include/asm/mmu_context.h index b7063669f97..8dffed31701 100644 --- a/arch/powerpc/include/asm/mmu_context.h +++ b/arch/powerpc/include/asm/mmu_context.h @@ -14,7 +14,6 @@ /* * Most if the context management is out of line */ -extern void mmu_context_init(void); extern int init_new_context(struct task_struct *tsk, struct mm_struct *mm); extern void destroy_context(struct mm_struct *mm); @@ -23,6 +22,12 @@ extern void switch_stab(struct task_struct *tsk, struct mm_struct *mm); extern void switch_slb(struct task_struct *tsk, struct mm_struct *mm); extern void set_context(unsigned long id, pgd_t *pgd); +#ifdef CONFIG_PPC_BOOK3S_64 +static inline void mmu_context_init(void) { } +#else +extern void mmu_context_init(void); +#endif + /* * switch_mm is the entry point called from the architecture independent * code in kernel/sched.c diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c index 91b89b8d63d..325dc5b2e62 100644 --- a/arch/powerpc/kernel/setup_64.c +++ b/arch/powerpc/kernel/setup_64.c @@ -534,6 +534,10 @@ void __init setup_arch(char **cmdline_p) #endif paging_init(); + + /* Initialize the MMU context management stuff */ + mmu_context_init(); + ppc64_boot_msg(0x15, "Setup Done"); } -- cgit v1.2.3-70-g09d2 From 747bea91b764aefd59091ebff80f182282f1d23c Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Thu, 23 Jul 2009 23:15:27 +0000 Subject: powerpc: Clean ifdef usage in copy_thread() Currently, a single ifdef covers SLB related bits and more generic ppc64 related bits, split this in two separate ifdef's since 64-bit BookE will need one but not the other. Signed-off-by: Benjamin Herrenschmidt Acked-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/process.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch') diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c index 892a9f2e6d7..678ff132e8b 100644 --- a/arch/powerpc/kernel/process.c +++ b/arch/powerpc/kernel/process.c @@ -664,6 +664,7 @@ int copy_thread(unsigned long clone_flags, unsigned long usp, sp_vsid |= SLB_VSID_KERNEL | llp; p->thread.ksp_vsid = sp_vsid; } +#endif /* CONFIG_PPC_STD_MMU_64 */ /* * The PPC64 ABI makes use of a TOC to contain function @@ -671,6 +672,7 @@ int copy_thread(unsigned long clone_flags, unsigned long usp, * to the TOC entry. The first entry is a pointer to the actual * function. */ +#ifdef CONFIG_PPC64 kregs->nip = *((unsigned long *)ret_from_fork); #else kregs->nip = (unsigned long)ret_from_fork; -- cgit v1.2.3-70-g09d2 From cf54dc7cd4f9aab55cd3e1794b0b74c3c88cd1a0 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Thu, 23 Jul 2009 23:15:28 +0000 Subject: powerpc: Move definitions of secondary CPU spinloop to header file Those definitions are currently declared extern in the .c file where they are used, move them to a header file instead. Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/include/asm/smp.h | 9 +++++++++ arch/powerpc/kernel/prom_init.c | 4 ---- arch/powerpc/kernel/setup_64.c | 3 --- arch/powerpc/platforms/85xx/smp.c | 1 - arch/powerpc/platforms/86xx/mpc86xx_smp.c | 1 - arch/powerpc/platforms/cell/smp.c | 2 -- arch/powerpc/platforms/pseries/smp.c | 2 -- 7 files changed, 9 insertions(+), 13 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/include/asm/smp.h b/arch/powerpc/include/asm/smp.h index c25f73d1d84..e782f43ee66 100644 --- a/arch/powerpc/include/asm/smp.h +++ b/arch/powerpc/include/asm/smp.h @@ -148,6 +148,15 @@ extern struct smp_ops_t *smp_ops; extern void arch_send_call_function_single_ipi(int cpu); extern void arch_send_call_function_ipi(cpumask_t mask); +/* Definitions relative to the secondary CPU spin loop + * and entry point. Not all of them exist on both 32 and + * 64-bit but defining them all here doesn't harm + */ +extern void generic_secondary_smp_init(void); +extern unsigned long __secondary_hold_spinloop; +extern unsigned long __secondary_hold_acknowledge; +extern char __secondary_hold; + #endif /* __ASSEMBLY__ */ #endif /* __KERNEL__ */ diff --git a/arch/powerpc/kernel/prom_init.c b/arch/powerpc/kernel/prom_init.c index a538824616f..d942404779c 100644 --- a/arch/powerpc/kernel/prom_init.c +++ b/arch/powerpc/kernel/prom_init.c @@ -1259,10 +1259,6 @@ static void __init prom_initialize_tce_table(void) * * -- Cort */ -extern char __secondary_hold; -extern unsigned long __secondary_hold_spinloop; -extern unsigned long __secondary_hold_acknowledge; - /* * We want to reference the copy of __secondary_hold_* in the * 0 - 0x100 address range diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c index 325dc5b2e62..a6b6c4c9ae4 100644 --- a/arch/powerpc/kernel/setup_64.c +++ b/arch/powerpc/kernel/setup_64.c @@ -230,9 +230,6 @@ void early_setup_secondary(void) #endif /* CONFIG_SMP */ #if defined(CONFIG_SMP) || defined(CONFIG_KEXEC) -extern unsigned long __secondary_hold_spinloop; -extern void generic_secondary_smp_init(void); - void smp_release_cpus(void) { unsigned long *ptr; diff --git a/arch/powerpc/platforms/85xx/smp.c b/arch/powerpc/platforms/85xx/smp.c index 62c592ede64..9f526ba31c1 100644 --- a/arch/powerpc/platforms/85xx/smp.c +++ b/arch/powerpc/platforms/85xx/smp.c @@ -25,7 +25,6 @@ #include -extern volatile unsigned long __secondary_hold_acknowledge; extern void __early_start(void); #define BOOT_ENTRY_ADDR_UPPER 0 diff --git a/arch/powerpc/platforms/86xx/mpc86xx_smp.c b/arch/powerpc/platforms/86xx/mpc86xx_smp.c index d84bbb508ee..eacea0e3fcc 100644 --- a/arch/powerpc/platforms/86xx/mpc86xx_smp.c +++ b/arch/powerpc/platforms/86xx/mpc86xx_smp.c @@ -27,7 +27,6 @@ #include "mpc86xx.h" extern void __secondary_start_mpc86xx(void); -extern unsigned long __secondary_hold_acknowledge; #define MCM_PORT_CONFIG_OFFSET 0x10 diff --git a/arch/powerpc/platforms/cell/smp.c b/arch/powerpc/platforms/cell/smp.c index bc97fada48c..f774530075b 100644 --- a/arch/powerpc/platforms/cell/smp.c +++ b/arch/powerpc/platforms/cell/smp.c @@ -58,8 +58,6 @@ */ static cpumask_t of_spin_map; -extern void generic_secondary_smp_init(unsigned long); - /** * smp_startup_cpu() - start the given cpu * diff --git a/arch/powerpc/platforms/pseries/smp.c b/arch/powerpc/platforms/pseries/smp.c index 1f8f6cfb94f..440000cc713 100644 --- a/arch/powerpc/platforms/pseries/smp.c +++ b/arch/powerpc/platforms/pseries/smp.c @@ -56,8 +56,6 @@ */ static cpumask_t of_spin_map; -extern void generic_secondary_smp_init(unsigned long); - /** * smp_startup_cpu() - start the given cpu * -- cgit v1.2.3-70-g09d2 From c7cc58a1ad8dfe3c199d3b6ce50412b86dd3edaf Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Thu, 23 Jul 2009 23:15:28 +0000 Subject: powerpc/mm: Rework & cleanup page table freeing code path That patch used to just add a hook to page table flushing but pulling that string brought out a whole bunch of issues, so it now does that and more: - We now make the RCU batching of page freeing SMP only, as I believe it was intended initially. We make a few more things compile to nothing on !CONFIG_SMP - Some macros are turned into functions, though that forced me to out of line a few stuffs due to unsolvable include depenencies, however it's probably better that way anyway, it's not -that- critical code path. - 32-bit didn't call pte_free_finish() on tlb_flush() which means that it wouldn't push out the batch to RCU for delayed freeing when a bunch of page tables have been freed, they would just stay in there until the batch gets full. 64-bit BookE will use that hook to maintain the virtually linear page tables or the indirect entries in the TLB when using the HW loader. Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/include/asm/pgalloc.h | 39 +++++++++++++++++++++++++++----------- arch/powerpc/include/asm/tlb.h | 38 +++---------------------------------- arch/powerpc/mm/pgtable.c | 10 ++++++++++ arch/powerpc/mm/tlb_hash32.c | 3 +++ arch/powerpc/mm/tlb_hash64.c | 15 +++++++++++++++ arch/powerpc/mm/tlb_nohash.c | 8 ++++++++ 6 files changed, 67 insertions(+), 46 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/include/asm/pgalloc.h b/arch/powerpc/include/asm/pgalloc.h index 1730e5e298d..34b080671f0 100644 --- a/arch/powerpc/include/asm/pgalloc.h +++ b/arch/powerpc/include/asm/pgalloc.h @@ -4,6 +4,15 @@ #include +#ifdef CONFIG_PPC_BOOK3E +extern void tlb_flush_pgtable(struct mmu_gather *tlb, unsigned long address); +#else /* CONFIG_PPC_BOOK3E */ +static inline void tlb_flush_pgtable(struct mmu_gather *tlb, + unsigned long address) +{ +} +#endif /* !CONFIG_PPC_BOOK3E */ + static inline void pte_free_kernel(struct mm_struct *mm, pte_t *pte) { free_page((unsigned long)pte); @@ -35,19 +44,27 @@ static inline pgtable_free_t pgtable_free_cache(void *p, int cachenum, #include #endif -extern void pgtable_free_tlb(struct mmu_gather *tlb, pgtable_free_t pgf); - #ifdef CONFIG_SMP -#define __pte_free_tlb(tlb,ptepage,address) \ -do { \ - pgtable_page_dtor(ptepage); \ - pgtable_free_tlb(tlb, pgtable_free_cache(page_address(ptepage), \ - PTE_NONCACHE_NUM, PTE_TABLE_SIZE-1)); \ -} while (0) -#else -#define __pte_free_tlb(tlb, pte, address) pte_free((tlb)->mm, (pte)) -#endif +extern void pgtable_free_tlb(struct mmu_gather *tlb, pgtable_free_t pgf); +extern void pte_free_finish(void); +#else /* CONFIG_SMP */ +static inline void pgtable_free_tlb(struct mmu_gather *tlb, pgtable_free_t pgf) +{ + pgtable_free(pgf); +} +static inline void pte_free_finish(void) { } +#endif /* !CONFIG_SMP */ +static inline void __pte_free_tlb(struct mmu_gather *tlb, struct page *ptepage, + unsigned long address) +{ + pgtable_free_t pgf = pgtable_free_cache(page_address(ptepage), + PTE_NONCACHE_NUM, + PTE_TABLE_SIZE-1); + tlb_flush_pgtable(tlb, address); + pgtable_page_dtor(ptepage); + pgtable_free_tlb(tlb, pgf); +} #endif /* __KERNEL__ */ #endif /* _ASM_POWERPC_PGALLOC_H */ diff --git a/arch/powerpc/include/asm/tlb.h b/arch/powerpc/include/asm/tlb.h index e20ff7541f3..e2b428b0f7b 100644 --- a/arch/powerpc/include/asm/tlb.h +++ b/arch/powerpc/include/asm/tlb.h @@ -25,57 +25,25 @@ #include -struct mmu_gather; - #define tlb_start_vma(tlb, vma) do { } while (0) #define tlb_end_vma(tlb, vma) do { } while (0) -#if !defined(CONFIG_PPC_STD_MMU) - -#define tlb_flush(tlb) flush_tlb_mm((tlb)->mm) - -#elif defined(__powerpc64__) - -extern void pte_free_finish(void); - -static inline void tlb_flush(struct mmu_gather *tlb) -{ - struct ppc64_tlb_batch *tlbbatch = &__get_cpu_var(ppc64_tlb_batch); - - /* If there's a TLB batch pending, then we must flush it because the - * pages are going to be freed and we really don't want to have a CPU - * access a freed page because it has a stale TLB - */ - if (tlbbatch->index) - __flush_tlb_pending(tlbbatch); - - pte_free_finish(); -} - -#else - extern void tlb_flush(struct mmu_gather *tlb); -#endif - /* Get the generic bits... */ #include -#if !defined(CONFIG_PPC_STD_MMU) || defined(__powerpc64__) - -#define __tlb_remove_tlb_entry(tlb, pte, address) do { } while (0) - -#else extern void flush_hash_entry(struct mm_struct *mm, pte_t *ptep, unsigned long address); static inline void __tlb_remove_tlb_entry(struct mmu_gather *tlb, pte_t *ptep, - unsigned long address) + unsigned long address) { +#ifdef CONFIG_PPC_STD_MMU_32 if (pte_val(*ptep) & _PAGE_HASHPTE) flush_hash_entry(tlb->mm, ptep, address); +#endif } -#endif #endif /* __KERNEL__ */ #endif /* __ASM_POWERPC_TLB_H */ diff --git a/arch/powerpc/mm/pgtable.c b/arch/powerpc/mm/pgtable.c index 627767d6169..a65979a5f75 100644 --- a/arch/powerpc/mm/pgtable.c +++ b/arch/powerpc/mm/pgtable.c @@ -30,6 +30,14 @@ #include #include +#ifdef CONFIG_SMP + +/* + * Handle batching of page table freeing on SMP. Page tables are + * queued up and send to be freed later by RCU in order to avoid + * freeing a page table page that is being walked without locks + */ + static DEFINE_PER_CPU(struct pte_freelist_batch *, pte_freelist_cur); static unsigned long pte_freelist_forced_free; @@ -116,6 +124,8 @@ void pte_free_finish(void) *batchp = NULL; } +#endif /* CONFIG_SMP */ + /* * Handle i/d cache flushing, called from set_pte_at() or ptep_set_access_flags() */ diff --git a/arch/powerpc/mm/tlb_hash32.c b/arch/powerpc/mm/tlb_hash32.c index 65190587a36..8aaa8b7eb32 100644 --- a/arch/powerpc/mm/tlb_hash32.c +++ b/arch/powerpc/mm/tlb_hash32.c @@ -71,6 +71,9 @@ void tlb_flush(struct mmu_gather *tlb) */ _tlbia(); } + + /* Push out batch of freed page tables */ + pte_free_finish(); } /* diff --git a/arch/powerpc/mm/tlb_hash64.c b/arch/powerpc/mm/tlb_hash64.c index 937eb90677d..8e35a606693 100644 --- a/arch/powerpc/mm/tlb_hash64.c +++ b/arch/powerpc/mm/tlb_hash64.c @@ -154,6 +154,21 @@ void __flush_tlb_pending(struct ppc64_tlb_batch *batch) batch->index = 0; } +void tlb_flush(struct mmu_gather *tlb) +{ + struct ppc64_tlb_batch *tlbbatch = &__get_cpu_var(ppc64_tlb_batch); + + /* If there's a TLB batch pending, then we must flush it because the + * pages are going to be freed and we really don't want to have a CPU + * access a freed page because it has a stale TLB + */ + if (tlbbatch->index) + __flush_tlb_pending(tlbbatch); + + /* Push out batch of freed page tables */ + pte_free_finish(); +} + /** * __flush_hash_table_range - Flush all HPTEs for a given address range * from the hash table (and the TLB). But keeps diff --git a/arch/powerpc/mm/tlb_nohash.c b/arch/powerpc/mm/tlb_nohash.c index 761e8882416..6b43fc49f10 100644 --- a/arch/powerpc/mm/tlb_nohash.c +++ b/arch/powerpc/mm/tlb_nohash.c @@ -233,3 +233,11 @@ void flush_tlb_range(struct vm_area_struct *vma, unsigned long start, flush_tlb_mm(vma->vm_mm); } EXPORT_SYMBOL(flush_tlb_range); + +void tlb_flush(struct mmu_gather *tlb) +{ + flush_tlb_mm(tlb->mm); + + /* Push out batch of freed page tables */ + pte_free_finish(); +} -- cgit v1.2.3-70-g09d2 From 0257c99cdfaca53a881339e1cbca638c61569b05 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Thu, 23 Jul 2009 23:15:34 +0000 Subject: powerpc: Add SPR definitions for new 64-bit BookE This adds various SPRs defined on 64-bit BookE, along with changes to the definition of the base MSR values to add the values needed for 64-bit Book3E. Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/include/asm/reg.h | 10 +++------ arch/powerpc/include/asm/reg_booke.h | 42 +++++++++++++++++++++++++++++++++--- 2 files changed, 42 insertions(+), 10 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/include/asm/reg.h b/arch/powerpc/include/asm/reg.h index 2cedbb42761..c8715331e1b 100644 --- a/arch/powerpc/include/asm/reg.h +++ b/arch/powerpc/include/asm/reg.h @@ -98,19 +98,15 @@ #define MSR_RI __MASK(MSR_RI_LG) /* Recoverable Exception */ #define MSR_LE __MASK(MSR_LE_LG) /* Little Endian */ -#ifdef CONFIG_PPC64 +#if defined(CONFIG_PPC_BOOK3S_64) +/* Server variant */ #define MSR_ MSR_ME | MSR_RI | MSR_IR | MSR_DR | MSR_ISF |MSR_HV #define MSR_KERNEL MSR_ | MSR_SF - #define MSR_USER32 MSR_ | MSR_PR | MSR_EE #define MSR_USER64 MSR_USER32 | MSR_SF - -#else /* 32-bit */ +#elif defined(CONFIG_PPC_BOOK3S_32) || defined(CONFIG_8xx) /* Default MSR for kernel mode. */ -#ifndef MSR_KERNEL /* reg_booke.h also defines this */ #define MSR_KERNEL (MSR_ME|MSR_RI|MSR_IR|MSR_DR) -#endif - #define MSR_USER (MSR_KERNEL|MSR_PR|MSR_EE) #endif diff --git a/arch/powerpc/include/asm/reg_booke.h b/arch/powerpc/include/asm/reg_booke.h index 6bcf364cbb2..2c9c706e644 100644 --- a/arch/powerpc/include/asm/reg_booke.h +++ b/arch/powerpc/include/asm/reg_booke.h @@ -18,18 +18,26 @@ #define MSR_IS MSR_IR /* Instruction Space */ #define MSR_DS MSR_DR /* Data Space */ #define MSR_PMM (1<<2) /* Performance monitor mark bit */ +#define MSR_CM (1<<31) /* Computation Mode (0=32-bit, 1=64-bit) */ -/* Default MSR for kernel mode. */ -#if defined (CONFIG_40x) +#if defined(CONFIG_PPC_BOOK3E_64) +#define MSR_ MSR_ME | MSR_CE +#define MSR_KERNEL MSR_ | MSR_CM +#define MSR_USER32 MSR_ | MSR_PR | MSR_EE +#define MSR_USER64 MSR_USER32 | MSR_CM +#elif defined (CONFIG_40x) #define MSR_KERNEL (MSR_ME|MSR_RI|MSR_IR|MSR_DR|MSR_CE) -#elif defined(CONFIG_BOOKE) +#define MSR_USER (MSR_KERNEL|MSR_PR|MSR_EE) +#else #define MSR_KERNEL (MSR_ME|MSR_RI|MSR_CE) +#define MSR_USER (MSR_KERNEL|MSR_PR|MSR_EE) #endif /* Special Purpose Registers (SPRNs)*/ #define SPRN_DECAR 0x036 /* Decrementer Auto Reload Register */ #define SPRN_IVPR 0x03F /* Interrupt Vector Prefix Register */ #define SPRN_USPRG0 0x100 /* User Special Purpose Register General 0 */ +#define SPRN_SPRG3R 0x103 /* Special Purpose Register General 3 Read */ #define SPRN_SPRG4R 0x104 /* Special Purpose Register General 4 Read */ #define SPRN_SPRG5R 0x105 /* Special Purpose Register General 5 Read */ #define SPRN_SPRG6R 0x106 /* Special Purpose Register General 6 Read */ @@ -38,11 +46,18 @@ #define SPRN_SPRG5W 0x115 /* Special Purpose Register General 5 Write */ #define SPRN_SPRG6W 0x116 /* Special Purpose Register General 6 Write */ #define SPRN_SPRG7W 0x117 /* Special Purpose Register General 7 Write */ +#define SPRN_EPCR 0x133 /* Embedded Processor Control Register */ #define SPRN_DBCR2 0x136 /* Debug Control Register 2 */ #define SPRN_IAC3 0x13A /* Instruction Address Compare 3 */ #define SPRN_IAC4 0x13B /* Instruction Address Compare 4 */ #define SPRN_DVC1 0x13E /* Data Value Compare Register 1 */ #define SPRN_DVC2 0x13F /* Data Value Compare Register 2 */ +#define SPRN_MAS8 0x155 /* MMU Assist Register 8 */ +#define SPRN_TLB0PS 0x158 /* TLB 0 Page Size Register */ +#define SPRN_MAS5_MAS6 0x15c /* MMU Assist Register 5 || 6 */ +#define SPRN_MAS8_MAS1 0x15d /* MMU Assist Register 8 || 1 */ +#define SPRN_MAS7_MAS3 0x174 /* MMU Assist Register 7 || 3 */ +#define SPRN_MAS0_MAS1 0x175 /* MMU Assist Register 0 || 1 */ #define SPRN_IVOR0 0x190 /* Interrupt Vector Offset Register 0 */ #define SPRN_IVOR1 0x191 /* Interrupt Vector Offset Register 1 */ #define SPRN_IVOR2 0x192 /* Interrupt Vector Offset Register 2 */ @@ -425,6 +440,27 @@ #define SGR_NORMAL 0 /* Speculative fetching allowed. */ #define SGR_GUARDED 1 /* Speculative fetching disallowed. */ +/* Bit definitions for EPCR */ +#define SPRN_EPCR_EXTGS 0x80000000 /* External Input interrupt + * directed to Guest state */ +#define SPRN_EPCR_DTLBGS 0x40000000 /* Data TLB Error interrupt + * directed to guest state */ +#define SPRN_EPCR_ITLBGS 0x20000000 /* Instr. TLB error interrupt + * directed to guest state */ +#define SPRN_EPCR_DSIGS 0x10000000 /* Data Storage interrupt + * directed to guest state */ +#define SPRN_EPCR_ISIGS 0x08000000 /* Instr. Storage interrupt + * directed to guest state */ +#define SPRN_EPCR_DUVD 0x04000000 /* Disable Hypervisor Debug */ +#define SPRN_EPCR_ICM 0x02000000 /* Interrupt computation mode + * (copied to MSR:CM on intr) */ +#define SPRN_EPCR_GICM 0x01000000 /* Guest Interrupt Comp. mode */ +#define SPRN_EPCR_DGTMI 0x00800000 /* Disable TLB Guest Management + * instructions */ +#define SPRN_EPCR_DMIUH 0x00400000 /* Disable MAS Interrupt updates + * for hypervisor */ + + /* * The IBM-403 is an even more odd special case, as it is much * older than the IBM-405 series. We put these down here incase someone -- cgit v1.2.3-70-g09d2 From 57e2a99f74b0d3720c97a6aadb57ae6aad3c61ea Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Tue, 28 Jul 2009 11:59:34 +1000 Subject: powerpc: Add memory management headers for new 64-bit BookE This adds the PTE and pgtable format definitions, along with changes to the kernel memory map and other definitions related to implementing support for 64-bit Book3E. This also shields some asm-offset bits that are currently only relevant on 32-bit We also move the definition of the "linux" page size constants to the common mmu.h file and add a few sizes that are relevant to embedded processors. Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/include/asm/mmu-book3e.h | 27 ++++++++++++ arch/powerpc/include/asm/mmu-hash64.h | 20 --------- arch/powerpc/include/asm/mmu.h | 37 +++++++++++++++++ arch/powerpc/include/asm/page.h | 4 ++ arch/powerpc/include/asm/page_64.h | 10 +++++ arch/powerpc/include/asm/pgtable-ppc64.h | 61 ++++++++++++++++++++-------- arch/powerpc/include/asm/pte-book3e.h | 70 ++++++++++++++++++++++++++++++++ arch/powerpc/include/asm/pte-common.h | 3 ++ arch/powerpc/kernel/asm-offsets.c | 5 ++- arch/powerpc/mm/hugetlbpage.c | 8 +++- 10 files changed, 205 insertions(+), 40 deletions(-) create mode 100644 arch/powerpc/include/asm/pte-book3e.h (limited to 'arch') diff --git a/arch/powerpc/include/asm/mmu-book3e.h b/arch/powerpc/include/asm/mmu-book3e.h index 42a39b4aace..6ddbe48d07f 100644 --- a/arch/powerpc/include/asm/mmu-book3e.h +++ b/arch/powerpc/include/asm/mmu-book3e.h @@ -170,6 +170,33 @@ typedef struct { unsigned int active; unsigned long vdso_base; } mm_context_t; + +/* Page size definitions, common between 32 and 64-bit + * + * shift : is the "PAGE_SHIFT" value for that page size + * penc : is the pte encoding mask + * + */ +struct mmu_psize_def +{ + unsigned int shift; /* number of bits */ + unsigned int enc; /* PTE encoding */ +}; +extern struct mmu_psize_def mmu_psize_defs[MMU_PAGE_COUNT]; + +/* The page sizes use the same names as 64-bit hash but are + * constants + */ +#if defined(CONFIG_PPC_4K_PAGES) +#define mmu_virtual_psize MMU_PAGE_4K +#elif defined(CONFIG_PPC_64K_PAGES) +#define mmu_virtual_psize MMU_PAGE_64K +#else +#error Unsupported page size +#endif + +extern int mmu_linear_psize; + #endif /* !__ASSEMBLY__ */ #endif /* _ASM_POWERPC_MMU_BOOK3E_H_ */ diff --git a/arch/powerpc/include/asm/mmu-hash64.h b/arch/powerpc/include/asm/mmu-hash64.h index 98c104a0996..b537903b9fc 100644 --- a/arch/powerpc/include/asm/mmu-hash64.h +++ b/arch/powerpc/include/asm/mmu-hash64.h @@ -138,26 +138,6 @@ struct mmu_psize_def #endif /* __ASSEMBLY__ */ -/* - * The kernel use the constants below to index in the page sizes array. - * The use of fixed constants for this purpose is better for performances - * of the low level hash refill handlers. - * - * A non supported page size has a "shift" field set to 0 - * - * Any new page size being implemented can get a new entry in here. Whether - * the kernel will use it or not is a different matter though. The actual page - * size used by hugetlbfs is not defined here and may be made variable - */ - -#define MMU_PAGE_4K 0 /* 4K */ -#define MMU_PAGE_64K 1 /* 64K */ -#define MMU_PAGE_64K_AP 2 /* 64K Admixed (in a 4K segment) */ -#define MMU_PAGE_1M 3 /* 1M */ -#define MMU_PAGE_16M 4 /* 16M */ -#define MMU_PAGE_16G 5 /* 16G */ -#define MMU_PAGE_COUNT 6 - /* * Segment sizes. * These are the values used by hardware in the B field of diff --git a/arch/powerpc/include/asm/mmu.h b/arch/powerpc/include/asm/mmu.h index fb57ded592f..2fcfefc6089 100644 --- a/arch/powerpc/include/asm/mmu.h +++ b/arch/powerpc/include/asm/mmu.h @@ -17,6 +17,7 @@ #define MMU_FTR_TYPE_40x ASM_CONST(0x00000004) #define MMU_FTR_TYPE_44x ASM_CONST(0x00000008) #define MMU_FTR_TYPE_FSL_E ASM_CONST(0x00000010) +#define MMU_FTR_TYPE_3E ASM_CONST(0x00000020) /* * This is individual features @@ -73,6 +74,41 @@ extern void early_init_mmu_secondary(void); #endif /* !__ASSEMBLY__ */ +/* The kernel use the constants below to index in the page sizes array. + * The use of fixed constants for this purpose is better for performances + * of the low level hash refill handlers. + * + * A non supported page size has a "shift" field set to 0 + * + * Any new page size being implemented can get a new entry in here. Whether + * the kernel will use it or not is a different matter though. The actual page + * size used by hugetlbfs is not defined here and may be made variable + * + * Note: This array ended up being a false good idea as it's growing to the + * point where I wonder if we should replace it with something different, + * to think about, feedback welcome. --BenH. + */ + +/* There are #define as they have to be used in assembly + * + * WARNING: If you change this list, make sure to update the array of + * names currently in arch/powerpc/mm/hugetlbpage.c or bad things will + * happen + */ +#define MMU_PAGE_4K 0 +#define MMU_PAGE_16K 1 +#define MMU_PAGE_64K 2 +#define MMU_PAGE_64K_AP 3 /* "Admixed pages" (hash64 only) */ +#define MMU_PAGE_256K 4 +#define MMU_PAGE_1M 5 +#define MMU_PAGE_8M 6 +#define MMU_PAGE_16M 7 +#define MMU_PAGE_256M 8 +#define MMU_PAGE_1G 9 +#define MMU_PAGE_16G 10 +#define MMU_PAGE_64G 11 +#define MMU_PAGE_COUNT 12 + #if defined(CONFIG_PPC_STD_MMU_64) /* 64-bit classic hash table MMU */ @@ -94,5 +130,6 @@ extern void early_init_mmu_secondary(void); # include #endif + #endif /* __KERNEL__ */ #endif /* _ASM_POWERPC_MMU_H_ */ diff --git a/arch/powerpc/include/asm/page.h b/arch/powerpc/include/asm/page.h index 4940662ee87..ff24254990e 100644 --- a/arch/powerpc/include/asm/page.h +++ b/arch/powerpc/include/asm/page.h @@ -139,7 +139,11 @@ extern phys_addr_t kernstart_addr; * Don't compare things with KERNELBASE or PAGE_OFFSET to test for * "kernelness", use is_kernel_addr() - it should do what you want. */ +#ifdef CONFIG_PPC_BOOK3E_64 +#define is_kernel_addr(x) ((x) >= 0x8000000000000000ul) +#else #define is_kernel_addr(x) ((x) >= PAGE_OFFSET) +#endif #ifndef __ASSEMBLY__ diff --git a/arch/powerpc/include/asm/page_64.h b/arch/powerpc/include/asm/page_64.h index 5817a3b747e..3f17b83f55a 100644 --- a/arch/powerpc/include/asm/page_64.h +++ b/arch/powerpc/include/asm/page_64.h @@ -135,12 +135,22 @@ extern void slice_set_range_psize(struct mm_struct *mm, unsigned long start, #endif /* __ASSEMBLY__ */ #else #define slice_init() +#ifdef CONFIG_PPC_STD_MMU_64 #define get_slice_psize(mm, addr) ((mm)->context.user_psize) #define slice_set_user_psize(mm, psize) \ do { \ (mm)->context.user_psize = (psize); \ (mm)->context.sllp = SLB_VSID_USER | mmu_psize_defs[(psize)].sllp; \ } while (0) +#else /* CONFIG_PPC_STD_MMU_64 */ +#ifdef CONFIG_PPC_64K_PAGES +#define get_slice_psize(mm, addr) MMU_PAGE_64K +#else /* CONFIG_PPC_64K_PAGES */ +#define get_slice_psize(mm, addr) MMU_PAGE_4K +#endif /* !CONFIG_PPC_64K_PAGES */ +#define slice_set_user_psize(mm, psize) do { BUG(); } while(0) +#endif /* !CONFIG_PPC_STD_MMU_64 */ + #define slice_set_range_psize(mm, start, len, psize) \ slice_set_user_psize((mm), (psize)) #define slice_mm_new_context(mm) 1 diff --git a/arch/powerpc/include/asm/pgtable-ppc64.h b/arch/powerpc/include/asm/pgtable-ppc64.h index 8cd083c6150..7254c5a3187 100644 --- a/arch/powerpc/include/asm/pgtable-ppc64.h +++ b/arch/powerpc/include/asm/pgtable-ppc64.h @@ -5,11 +5,6 @@ * the ppc64 hashed page table. */ -#ifndef __ASSEMBLY__ -#include -#include -#endif /* __ASSEMBLY__ */ - #ifdef CONFIG_PPC_64K_PAGES #include #else @@ -38,26 +33,46 @@ #endif /* - * Define the address range of the vmalloc VM area. + * Define the address range of the kernel non-linear virtual area + */ + +#ifdef CONFIG_PPC_BOOK3E +#define KERN_VIRT_START ASM_CONST(0x8000000000000000) +#else +#define KERN_VIRT_START ASM_CONST(0xD000000000000000) +#endif +#define KERN_VIRT_SIZE PGTABLE_RANGE + +/* + * The vmalloc space starts at the beginning of that region, and + * occupies half of it on hash CPUs and a quarter of it on Book3E */ -#define VMALLOC_START ASM_CONST(0xD000000000000000) -#define VMALLOC_SIZE (PGTABLE_RANGE >> 1) -#define VMALLOC_END (VMALLOC_START + VMALLOC_SIZE) +#define VMALLOC_START KERN_VIRT_START +#ifdef CONFIG_PPC_BOOK3E +#define VMALLOC_SIZE (KERN_VIRT_SIZE >> 2) +#else +#define VMALLOC_SIZE (KERN_VIRT_SIZE >> 1) +#endif +#define VMALLOC_END (VMALLOC_START + VMALLOC_SIZE) /* - * Define the address ranges for MMIO and IO space : + * The second half of the kernel virtual space is used for IO mappings, + * it's itself carved into the PIO region (ISA and PHB IO space) and + * the ioremap space * - * ISA_IO_BASE = VMALLOC_END, 64K reserved area + * ISA_IO_BASE = KERN_IO_START, 64K reserved area * PHB_IO_BASE = ISA_IO_BASE + 64K to ISA_IO_BASE + 2G, PHB IO spaces * IOREMAP_BASE = ISA_IO_BASE + 2G to VMALLOC_START + PGTABLE_RANGE */ +#define KERN_IO_START (KERN_VIRT_START + (KERN_VIRT_SIZE >> 1)) #define FULL_IO_SIZE 0x80000000ul -#define ISA_IO_BASE (VMALLOC_END) -#define ISA_IO_END (VMALLOC_END + 0x10000ul) +#define ISA_IO_BASE (KERN_IO_START) +#define ISA_IO_END (KERN_IO_START + 0x10000ul) #define PHB_IO_BASE (ISA_IO_END) -#define PHB_IO_END (VMALLOC_END + FULL_IO_SIZE) +#define PHB_IO_END (KERN_IO_START + FULL_IO_SIZE) #define IOREMAP_BASE (PHB_IO_END) -#define IOREMAP_END (VMALLOC_START + PGTABLE_RANGE) +#define IOREMAP_END (KERN_VIRT_START + KERN_VIRT_SIZE) + /* * Region IDs @@ -72,19 +87,28 @@ #define USER_REGION_ID (0UL) /* - * Defines the address of the vmemap area, in its own region + * Defines the address of the vmemap area, in its own region on + * hash table CPUs and after the vmalloc space on Book3E */ +#ifdef CONFIG_PPC_BOOK3E +#define VMEMMAP_BASE VMALLOC_END +#define VMEMMAP_END KERN_IO_START +#else #define VMEMMAP_BASE (VMEMMAP_REGION_ID << REGION_SHIFT) +#endif #define vmemmap ((struct page *)VMEMMAP_BASE) /* * Include the PTE bits definitions */ +#ifdef CONFIG_PPC_BOOK3S #include +#else +#include +#endif #include - #ifdef CONFIG_PPC_MM_SLICES #define HAVE_ARCH_UNMAPPED_AREA #define HAVE_ARCH_UNMAPPED_AREA_TOPDOWN @@ -92,6 +116,9 @@ #ifndef __ASSEMBLY__ +#include +#include + /* * This is the default implementation of various PTE accessors, it's * used in all cases except Book3S with 64K pages where we have a diff --git a/arch/powerpc/include/asm/pte-book3e.h b/arch/powerpc/include/asm/pte-book3e.h new file mode 100644 index 00000000000..1d27c77d770 --- /dev/null +++ b/arch/powerpc/include/asm/pte-book3e.h @@ -0,0 +1,70 @@ +#ifndef _ASM_POWERPC_PTE_BOOK3E_H +#define _ASM_POWERPC_PTE_BOOK3E_H +#ifdef __KERNEL__ + +/* PTE bit definitions for processors compliant to the Book3E + * architecture 2.06 or later. The position of the PTE bits + * matches the HW definition of the optional Embedded Page Table + * category. + */ + +/* Architected bits */ +#define _PAGE_PRESENT 0x000001 /* software: pte contains a translation */ +#define _PAGE_FILE 0x000002 /* (!present only) software: pte holds file offset */ +#define _PAGE_SW1 0x000002 +#define _PAGE_BAP_SR 0x000004 +#define _PAGE_BAP_UR 0x000008 +#define _PAGE_BAP_SW 0x000010 +#define _PAGE_BAP_UW 0x000020 +#define _PAGE_BAP_SX 0x000040 +#define _PAGE_BAP_UX 0x000080 +#define _PAGE_PSIZE_MSK 0x000f00 +#define _PAGE_PSIZE_4K 0x000200 +#define _PAGE_PSIZE_64K 0x000600 +#define _PAGE_PSIZE_1M 0x000a00 +#define _PAGE_PSIZE_16M 0x000e00 +#define _PAGE_DIRTY 0x001000 /* C: page changed */ +#define _PAGE_SW0 0x002000 +#define _PAGE_U3 0x004000 +#define _PAGE_U2 0x008000 +#define _PAGE_U1 0x010000 +#define _PAGE_U0 0x020000 +#define _PAGE_ACCESSED 0x040000 +#define _PAGE_LENDIAN 0x080000 +#define _PAGE_GUARDED 0x100000 +#define _PAGE_COHERENT 0x200000 /* M: enforce memory coherence */ +#define _PAGE_NO_CACHE 0x400000 /* I: cache inhibit */ +#define _PAGE_WRITETHRU 0x800000 /* W: cache write-through */ + +/* "Higher level" linux bit combinations */ +#define _PAGE_EXEC _PAGE_BAP_SX /* Can be executed from potentially */ +#define _PAGE_HWEXEC _PAGE_BAP_UX /* .. and was cache cleaned */ +#define _PAGE_RW (_PAGE_BAP_SW | _PAGE_BAP_UW) /* User write permission */ +#define _PAGE_KERNEL_RW (_PAGE_BAP_SW | _PAGE_BAP_SR | _PAGE_DIRTY) +#define _PAGE_KERNEL_RO (_PAGE_BAP_SR) +#define _PAGE_USER (_PAGE_BAP_UR | _PAGE_BAP_SR) /* Can be read */ + +#define _PAGE_HASHPTE 0 +#define _PAGE_BUSY 0 + +#define _PAGE_SPECIAL _PAGE_SW0 + +/* Flags to be preserved on PTE modifications */ +#define _PAGE_HPTEFLAGS _PAGE_BUSY + +/* Base page size */ +#ifdef CONFIG_PPC_64K_PAGES +#define _PAGE_PSIZE _PAGE_PSIZE_64K +#define PTE_RPN_SHIFT (28) +#else +#define _PAGE_PSIZE _PAGE_PSIZE_4K +#define PTE_RPN_SHIFT (24) +#endif + +/* On 32-bit, we never clear the top part of the PTE */ +#ifdef CONFIG_PPC32 +#define _PTE_NONE_MASK 0xffffffff00000000ULL +#endif + +#endif /* __KERNEL__ */ +#endif /* _ASM_POWERPC_PTE_FSL_BOOKE_H */ diff --git a/arch/powerpc/include/asm/pte-common.h b/arch/powerpc/include/asm/pte-common.h index a7e210b6b48..8bb6464ba61 100644 --- a/arch/powerpc/include/asm/pte-common.h +++ b/arch/powerpc/include/asm/pte-common.h @@ -34,6 +34,9 @@ #ifndef _PAGE_4K_PFN #define _PAGE_4K_PFN 0 #endif +#ifndef _PAGE_SAO +#define _PAGE_SAO 0 +#endif #ifndef _PAGE_PSIZE #define _PAGE_PSIZE 0 #endif diff --git a/arch/powerpc/kernel/asm-offsets.c b/arch/powerpc/kernel/asm-offsets.c index 561b6465231..0a9f30b5495 100644 --- a/arch/powerpc/kernel/asm-offsets.c +++ b/arch/powerpc/kernel/asm-offsets.c @@ -52,9 +52,11 @@ #include #endif +#ifdef CONFIG_PPC32 #if defined(CONFIG_BOOKE) || defined(CONFIG_40x) #include "head_booke.h" #endif +#endif #if defined(CONFIG_FSL_BOOKE) #include "../mm/mmu_decl.h" @@ -260,6 +262,7 @@ int main(void) DEFINE(_SRR1, STACK_FRAME_OVERHEAD+sizeof(struct pt_regs)+8); #endif /* CONFIG_PPC64 */ +#if defined(CONFIG_PPC32) #if defined(CONFIG_BOOKE) || defined(CONFIG_40x) DEFINE(EXC_LVL_SIZE, STACK_EXC_LVL_FRAME_SIZE); DEFINE(MAS0, STACK_INT_FRAME_SIZE+offsetof(struct exception_regs, mas0)); @@ -278,7 +281,7 @@ int main(void) DEFINE(_DSRR1, STACK_INT_FRAME_SIZE+offsetof(struct exception_regs, dsrr1)); DEFINE(SAVED_KSP_LIMIT, STACK_INT_FRAME_SIZE+offsetof(struct exception_regs, saved_ksp_limit)); #endif - +#endif DEFINE(CLONE_VM, CLONE_VM); DEFINE(CLONE_UNTRACED, CLONE_UNTRACED); diff --git a/arch/powerpc/mm/hugetlbpage.c b/arch/powerpc/mm/hugetlbpage.c index c46ef2ffa3d..90df6ffe3a4 100644 --- a/arch/powerpc/mm/hugetlbpage.c +++ b/arch/powerpc/mm/hugetlbpage.c @@ -57,8 +57,10 @@ unsigned int mmu_huge_psizes[MMU_PAGE_COUNT] = { }; /* initialize all to 0 */ #define HUGEPTE_CACHE_NAME(psize) (huge_pgtable_cache_name[psize]) static const char *huge_pgtable_cache_name[MMU_PAGE_COUNT] = { - "unused_4K", "hugepte_cache_64K", "unused_64K_AP", - "hugepte_cache_1M", "hugepte_cache_16M", "hugepte_cache_16G" + [MMU_PAGE_64K] = "hugepte_cache_64K", + [MMU_PAGE_1M] = "hugepte_cache_1M", + [MMU_PAGE_16M] = "hugepte_cache_16M", + [MMU_PAGE_16G] = "hugepte_cache_16G", }; /* Flag to mark huge PD pointers. This means pmd_bad() and pud_bad() @@ -700,6 +702,8 @@ static void __init set_huge_psize(int psize) if (mmu_huge_psizes[psize] || mmu_psize_defs[psize].shift == PAGE_SHIFT) return; + if (WARN_ON(HUGEPTE_CACHE_NAME(psize) == NULL)) + return; hugetlb_add_hstate(mmu_psize_defs[psize].shift - PAGE_SHIFT); switch (mmu_psize_defs[psize].shift) { -- cgit v1.2.3-70-g09d2 From 13363ab9b9d040ebeace3a1a3a5ddcb13bf0d644 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Thu, 23 Jul 2009 23:15:39 +0000 Subject: powerpc: Add definitions used by exception handling on 64-bit Book3E This adds various definitions and macros used by the exception and TLB miss handling on 64-bit BookE It also adds the definitions of the SPRGs used for various exception types Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/include/asm/exception-64e.h | 201 +++++++++++++++++++++++++++++++ arch/powerpc/include/asm/reg.h | 19 +++ 2 files changed, 220 insertions(+) create mode 100644 arch/powerpc/include/asm/exception-64e.h (limited to 'arch') diff --git a/arch/powerpc/include/asm/exception-64e.h b/arch/powerpc/include/asm/exception-64e.h new file mode 100644 index 00000000000..94cb3d79d12 --- /dev/null +++ b/arch/powerpc/include/asm/exception-64e.h @@ -0,0 +1,201 @@ +/* + * Definitions for use by exception code on Book3-E + * + * Copyright (C) 2008 Ben. Herrenschmidt (benh@kernel.crashing.org), IBM Corp. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ +#ifndef _ASM_POWERPC_EXCEPTION_64E_H +#define _ASM_POWERPC_EXCEPTION_64E_H + +/* + * SPRGs usage an other considerations... + * + * Since TLB miss and other standard exceptions can be interrupted by + * critical exceptions which can themselves be interrupted by machine + * checks, and since the two later can themselves cause a TLB miss when + * hitting the linear mapping for the kernel stacks, we need to be a bit + * creative on how we use SPRGs. + * + * The base idea is that we have one SRPG reserved for critical and one + * for machine check interrupts. Those are used to save a GPR that can + * then be used to get the PACA, and store as much context as we need + * to save in there. That includes saving the SPRGs used by the TLB miss + * handler for linear mapping misses and the associated SRR0/1 due to + * the above re-entrancy issue. + * + * So here's the current usage pattern. It's done regardless of which + * SPRGs are user-readable though, thus we might have to change some of + * this later. In order to do that more easily, we use special constants + * for naming them + * + * WARNING: Some of these SPRGs are user readable. We need to do something + * about it as some point by making sure they can't be used to leak kernel + * critical data + */ + + +/* We are out of SPRGs so we save some things in the PACA. The normal + * exception frame is smaller than the CRIT or MC one though + */ +#define EX_R1 (0 * 8) +#define EX_CR (1 * 8) +#define EX_R10 (2 * 8) +#define EX_R11 (3 * 8) +#define EX_R14 (4 * 8) +#define EX_R15 (5 * 8) + +/* The TLB miss exception uses different slots */ + +#define EX_TLB_R10 ( 0 * 8) +#define EX_TLB_R11 ( 1 * 8) +#define EX_TLB_R12 ( 2 * 8) +#define EX_TLB_R13 ( 3 * 8) +#define EX_TLB_R14 ( 4 * 8) +#define EX_TLB_R15 ( 5 * 8) +#define EX_TLB_R16 ( 6 * 8) +#define EX_TLB_CR ( 7 * 8) +#define EX_TLB_DEAR ( 8 * 8) /* Level 0 and 2 only */ +#define EX_TLB_ESR ( 9 * 8) /* Level 0 and 2 only */ +#define EX_TLB_SRR0 (10 * 8) +#define EX_TLB_SRR1 (11 * 8) +#define EX_TLB_MMUCR0 (12 * 8) /* Level 0 */ +#define EX_TLB_MAS1 (12 * 8) /* Level 0 */ +#define EX_TLB_MAS2 (13 * 8) /* Level 0 */ +#ifdef CONFIG_BOOK3E_MMU_TLB_STATS +#define EX_TLB_R8 (14 * 8) +#define EX_TLB_R9 (15 * 8) +#define EX_TLB_LR (16 * 8) +#define EX_TLB_SIZE (17 * 8) +#else +#define EX_TLB_SIZE (14 * 8) +#endif + +#define START_EXCEPTION(label) \ + .globl exc_##label##_book3e; \ +exc_##label##_book3e: + +/* TLB miss exception prolog + * + * This prolog handles re-entrancy (up to 3 levels supported in the PACA + * though we currently don't test for overflow). It provides you with a + * re-entrancy safe working space of r10...r16 and CR with r12 being used + * as the exception area pointer in the PACA for that level of re-entrancy + * and r13 containing the PACA pointer. + * + * SRR0 and SRR1 are saved, but DEAR and ESR are not, since they don't apply + * as-is for instruction exceptions. It's up to the actual exception code + * to save them as well if required. + */ +#define TLB_MISS_PROLOG \ + mtspr SPRN_SPRG_TLB_SCRATCH,r12; \ + mfspr r12,SPRN_SPRG_TLB_EXFRAME; \ + std r10,EX_TLB_R10(r12); \ + mfcr r10; \ + std r11,EX_TLB_R11(r12); \ + mfspr r11,SPRN_SPRG_TLB_SCRATCH; \ + std r13,EX_TLB_R13(r12); \ + mfspr r13,SPRN_SPRG_PACA; \ + std r14,EX_TLB_R14(r12); \ + addi r14,r12,EX_TLB_SIZE; \ + std r15,EX_TLB_R15(r12); \ + mfspr r15,SPRN_SRR1; \ + std r16,EX_TLB_R16(r12); \ + mfspr r16,SPRN_SRR0; \ + std r10,EX_TLB_CR(r12); \ + std r11,EX_TLB_R12(r12); \ + mtspr SPRN_SPRG_TLB_EXFRAME,r14; \ + std r15,EX_TLB_SRR1(r12); \ + std r16,EX_TLB_SRR0(r12); \ + TLB_MISS_PROLOG_STATS + +/* And these are the matching epilogs that restores things + * + * There are 3 epilogs: + * + * - SUCCESS : Unwinds one level + * - ERROR : restore from level 0 and reset + * - ERROR_SPECIAL : restore from current level and reset + * + * Normal errors use ERROR, that is, they restore the initial fault context + * and trigger a fault. However, there is a special case for linear mapping + * errors. Those should basically never happen, but if they do happen, we + * want the error to point out the context that did that linear mapping + * fault, not the initial level 0 (basically, we got a bogus PGF or something + * like that). For userland errors on the linear mapping, there is no + * difference since those are always level 0 anyway + */ + +#define TLB_MISS_RESTORE(freg) \ + ld r14,EX_TLB_CR(r12); \ + ld r10,EX_TLB_R10(r12); \ + ld r15,EX_TLB_SRR0(r12); \ + ld r16,EX_TLB_SRR1(r12); \ + mtspr SPRN_SPRG_TLB_EXFRAME,freg; \ + ld r11,EX_TLB_R11(r12); \ + mtcr r14; \ + ld r13,EX_TLB_R13(r12); \ + ld r14,EX_TLB_R14(r12); \ + mtspr SPRN_SRR0,r15; \ + ld r15,EX_TLB_R15(r12); \ + mtspr SPRN_SRR1,r16; \ + TLB_MISS_RESTORE_STATS \ + ld r16,EX_TLB_R16(r12); \ + ld r12,EX_TLB_R12(r12); \ + +#define TLB_MISS_EPILOG_SUCCESS \ + TLB_MISS_RESTORE(r12) + +#define TLB_MISS_EPILOG_ERROR \ + addi r12,r13,PACA_EXTLB; \ + TLB_MISS_RESTORE(r12) + +#define TLB_MISS_EPILOG_ERROR_SPECIAL \ + addi r11,r13,PACA_EXTLB; \ + TLB_MISS_RESTORE(r11) + +#ifdef CONFIG_BOOK3E_MMU_TLB_STATS +#define TLB_MISS_PROLOG_STATS \ + mflr r10; \ + std r8,EX_TLB_R8(r12); \ + std r9,EX_TLB_R9(r12); \ + std r10,EX_TLB_LR(r12); +#define TLB_MISS_RESTORE_STATS \ + ld r16,EX_TLB_LR(r12); \ + ld r9,EX_TLB_R9(r12); \ + ld r8,EX_TLB_R8(r12); \ + mtlr r16; +#define TLB_MISS_STATS_D(name) \ + addi r9,r13,MMSTAT_DSTATS+name; \ + bl .tlb_stat_inc; +#define TLB_MISS_STATS_I(name) \ + addi r9,r13,MMSTAT_ISTATS+name; \ + bl .tlb_stat_inc; +#define TLB_MISS_STATS_X(name) \ + ld r8,PACA_EXTLB+EX_TLB_ESR(r13); \ + cmpdi cr2,r8,-1; \ + beq cr2,61f; \ + addi r9,r13,MMSTAT_DSTATS+name; \ + b 62f; \ +61: addi r9,r13,MMSTAT_ISTATS+name; \ +62: bl .tlb_stat_inc; +#define TLB_MISS_STATS_SAVE_INFO \ + std r14,EX_TLB_ESR(r12); /* save ESR */ \ + + +#else +#define TLB_MISS_PROLOG_STATS +#define TLB_MISS_RESTORE_STATS +#define TLB_MISS_STATS_D(name) +#define TLB_MISS_STATS_I(name) +#define TLB_MISS_STATS_X(name) +#define TLB_MISS_STATS_Y(name) +#define TLB_MISS_STATS_SAVE_INFO +#endif + + +#endif /* _ASM_POWERPC_EXCEPTION_64E_H */ + diff --git a/arch/powerpc/include/asm/reg.h b/arch/powerpc/include/asm/reg.h index c8715331e1b..6315edc205d 100644 --- a/arch/powerpc/include/asm/reg.h +++ b/arch/powerpc/include/asm/reg.h @@ -652,6 +652,16 @@ * - SPRG2 scratch for exception vectors * - SPRG3 unused (user visible) * + * 64-bit embedded + * - SPRG0 generic exception scratch + * - SPRG2 TLB exception stack + * - SPRG3 unused (user visible) + * - SPRG4 unused (user visible) + * - SPRG6 TLB miss scratch (user visible, sorry !) + * - SPRG7 critical exception scratch + * - SPRG8 machine check exception scratch + * - SPRG9 debug exception scratch + * * All 32-bit: * - SPRG3 current thread_info pointer * (virtual on BookE, physical on others) @@ -705,6 +715,15 @@ #define SPRN_SPRG_SCRATCH0 SPRN_SPRG2 #endif +#ifdef CONFIG_PPC_BOOK3E_64 +#define SPRN_SPRG_MC_SCRATCH SPRN_SPRG8 +#define SPRN_SPRG_CRIT_SCRATCH SPRN_SPRG7 +#define SPRN_SPRG_DBG_SCRATCH SPRN_SPRG9 +#define SPRN_SPRG_TLB_EXFRAME SPRN_SPRG2 +#define SPRN_SPRG_TLB_SCRATCH SPRN_SPRG6 +#define SPRN_SPRG_GEN_SCRATCH SPRN_SPRG0 +#endif + #ifdef CONFIG_PPC_BOOK3S_32 #define SPRN_SPRG_SCRATCH0 SPRN_SPRG0 #define SPRN_SPRG_SCRATCH1 SPRN_SPRG1 -- cgit v1.2.3-70-g09d2 From dce6670aaa7efece0558010b48d5ef9d421154be Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Thu, 23 Jul 2009 23:15:42 +0000 Subject: powerpc: Add PACA fields specific to 64-bit Book3E processors This adds various fields in the PACA that are for use specifically by Book3E processors, such as exception save areas, current pgd pointer, special exceptions kernel stacks etc... Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/include/asm/paca.h | 23 ++++++++++++++++++++--- arch/powerpc/kernel/asm-offsets.c | 14 ++++++++++++++ arch/powerpc/kernel/paca.c | 3 +++ 3 files changed, 37 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/include/asm/paca.h b/arch/powerpc/include/asm/paca.h index c8a3cbfe02f..b634456ea89 100644 --- a/arch/powerpc/include/asm/paca.h +++ b/arch/powerpc/include/asm/paca.h @@ -14,9 +14,11 @@ #define _ASM_POWERPC_PACA_H #ifdef __KERNEL__ -#include -#include -#include +#include +#include +#include +#include +#include register struct paca_struct *local_paca asm("r13"); @@ -91,6 +93,21 @@ struct paca_struct { u16 slb_cache[SLB_CACHE_ENTRIES]; #endif /* CONFIG_PPC_STD_MMU_64 */ +#ifdef CONFIG_PPC_BOOK3E + pgd_t *pgd; /* Current PGD */ + pgd_t *kernel_pgd; /* Kernel PGD */ + u64 exgen[8] __attribute__((aligned(0x80))); + u64 extlb[EX_TLB_SIZE*3] __attribute__((aligned(0x80))); + u64 exmc[8]; /* used for machine checks */ + u64 excrit[8]; /* used for crit interrupts */ + u64 exdbg[8]; /* used for debug interrupts */ + + /* Kernel stack pointers for use by special exceptions */ + void *mc_kstack; + void *crit_kstack; + void *dbg_kstack; +#endif /* CONFIG_PPC_BOOK3E */ + mm_context_t context; /* diff --git a/arch/powerpc/kernel/asm-offsets.c b/arch/powerpc/kernel/asm-offsets.c index 0a9f30b5495..b9e010d0fc9 100644 --- a/arch/powerpc/kernel/asm-offsets.c +++ b/arch/powerpc/kernel/asm-offsets.c @@ -140,6 +140,20 @@ int main(void) context.high_slices_psize)); DEFINE(MMUPSIZEDEFSIZE, sizeof(struct mmu_psize_def)); #endif /* CONFIG_PPC_MM_SLICES */ + +#ifdef CONFIG_PPC_BOOK3E + DEFINE(PACAPGD, offsetof(struct paca_struct, pgd)); + DEFINE(PACA_KERNELPGD, offsetof(struct paca_struct, kernel_pgd)); + DEFINE(PACA_EXGEN, offsetof(struct paca_struct, exgen)); + DEFINE(PACA_EXTLB, offsetof(struct paca_struct, extlb)); + DEFINE(PACA_EXMC, offsetof(struct paca_struct, exmc)); + DEFINE(PACA_EXCRIT, offsetof(struct paca_struct, excrit)); + DEFINE(PACA_EXDBG, offsetof(struct paca_struct, exdbg)); + DEFINE(PACA_MC_STACK, offsetof(struct paca_struct, mc_kstack)); + DEFINE(PACA_CRIT_STACK, offsetof(struct paca_struct, crit_kstack)); + DEFINE(PACA_DBG_STACK, offsetof(struct paca_struct, dbg_kstack)); +#endif /* CONFIG_PPC_BOOK3E */ + #ifdef CONFIG_PPC_STD_MMU_64 DEFINE(PACASTABREAL, offsetof(struct paca_struct, stab_real)); DEFINE(PACASTABVIRT, offsetof(struct paca_struct, stab_addr)); diff --git a/arch/powerpc/kernel/paca.c b/arch/powerpc/kernel/paca.c index e9962c7f8a0..d16b1ea55d4 100644 --- a/arch/powerpc/kernel/paca.c +++ b/arch/powerpc/kernel/paca.c @@ -13,6 +13,7 @@ #include #include #include +#include /* This symbol is provided by the linker - let it fill in the paca * field correctly */ @@ -87,6 +88,8 @@ void __init initialise_pacas(void) #ifdef CONFIG_PPC_BOOK3S new_paca->lppaca_ptr = &lppaca[cpu]; +#else + new_paca->kernel_pgd = swapper_pg_dir; #endif new_paca->lock_token = 0x8000; new_paca->paca_index = cpu; -- cgit v1.2.3-70-g09d2 From a8f7758c1c52a13e031266483efd5525157e43e9 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Thu, 23 Jul 2009 23:15:45 +0000 Subject: powerpc/mm: Move around mmu_gathers definition on 64-bit The definition for the global structure mmu_gathers, used by generic code, is currently defined in multiple places not including anything used by 64-bit Book3E. This changes it by moving to one place common to all processors. Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/mm/init_32.c | 2 -- arch/powerpc/mm/pgtable.c | 2 ++ arch/powerpc/mm/tlb_hash64.c | 5 ----- 3 files changed, 2 insertions(+), 7 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/mm/init_32.c b/arch/powerpc/mm/init_32.c index 3de6a0d9382..3ef5084b90c 100644 --- a/arch/powerpc/mm/init_32.c +++ b/arch/powerpc/mm/init_32.c @@ -54,8 +54,6 @@ #endif #define MAX_LOW_MEM CONFIG_LOWMEM_SIZE -DEFINE_PER_CPU(struct mmu_gather, mmu_gathers); - phys_addr_t total_memory; phys_addr_t total_lowmem; diff --git a/arch/powerpc/mm/pgtable.c b/arch/powerpc/mm/pgtable.c index a65979a5f75..cafb2a26954 100644 --- a/arch/powerpc/mm/pgtable.c +++ b/arch/powerpc/mm/pgtable.c @@ -30,6 +30,8 @@ #include #include +DEFINE_PER_CPU(struct mmu_gather, mmu_gathers); + #ifdef CONFIG_SMP /* diff --git a/arch/powerpc/mm/tlb_hash64.c b/arch/powerpc/mm/tlb_hash64.c index 8e35a606693..2b2f35f6985 100644 --- a/arch/powerpc/mm/tlb_hash64.c +++ b/arch/powerpc/mm/tlb_hash64.c @@ -33,11 +33,6 @@ DEFINE_PER_CPU(struct ppc64_tlb_batch, ppc64_tlb_batch); -/* This is declared as we are using the more or less generic - * arch/powerpc/include/asm/tlb.h file -- tgall - */ -DEFINE_PER_CPU(struct mmu_gather, mmu_gathers); - /* * A linux PTE was changed and the corresponding hash table entry * neesd to be flushed. This function will either perform the flush -- cgit v1.2.3-70-g09d2 From 25d21ad6e799cccd097b9df2a2fefe19a7e1dfcf Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Thu, 23 Jul 2009 23:15:47 +0000 Subject: powerpc: Add TLB management code for 64-bit Book3E This adds the TLB miss handler assembly, the low level TLB flush routines along with the necessary hook for dealing with our virtual page tables or indirect TLB entries that need to be flushes when PTE pages are freed. There is currently no support for hugetlbfs Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/include/asm/mmu-40x.h | 3 + arch/powerpc/include/asm/mmu-44x.h | 6 + arch/powerpc/include/asm/mmu-8xx.h | 3 + arch/powerpc/include/asm/mmu-hash32.h | 6 + arch/powerpc/include/asm/mmu_context.h | 8 + arch/powerpc/kernel/setup_64.c | 4 + arch/powerpc/mm/mmu_decl.h | 14 +- arch/powerpc/mm/tlb_low_64e.S | 734 +++++++++++++++++++++++++++++++++ arch/powerpc/mm/tlb_nohash.c | 203 ++++++++- arch/powerpc/mm/tlb_nohash_low.S | 79 ++++ 10 files changed, 1055 insertions(+), 5 deletions(-) create mode 100644 arch/powerpc/mm/tlb_low_64e.S (limited to 'arch') diff --git a/arch/powerpc/include/asm/mmu-40x.h b/arch/powerpc/include/asm/mmu-40x.h index 776f415a36a..34916865eae 100644 --- a/arch/powerpc/include/asm/mmu-40x.h +++ b/arch/powerpc/include/asm/mmu-40x.h @@ -61,4 +61,7 @@ typedef struct { #endif /* !__ASSEMBLY__ */ +#define mmu_virtual_psize MMU_PAGE_4K +#define mmu_linear_psize MMU_PAGE_256M + #endif /* _ASM_POWERPC_MMU_40X_H_ */ diff --git a/arch/powerpc/include/asm/mmu-44x.h b/arch/powerpc/include/asm/mmu-44x.h index 3c86576bfef..0372669383a 100644 --- a/arch/powerpc/include/asm/mmu-44x.h +++ b/arch/powerpc/include/asm/mmu-44x.h @@ -79,16 +79,22 @@ typedef struct { #if (PAGE_SHIFT == 12) #define PPC44x_TLBE_SIZE PPC44x_TLB_4K +#define mmu_virtual_psize MMU_PAGE_4K #elif (PAGE_SHIFT == 14) #define PPC44x_TLBE_SIZE PPC44x_TLB_16K +#define mmu_virtual_psize MMU_PAGE_16K #elif (PAGE_SHIFT == 16) #define PPC44x_TLBE_SIZE PPC44x_TLB_64K +#define mmu_virtual_psize MMU_PAGE_64K #elif (PAGE_SHIFT == 18) #define PPC44x_TLBE_SIZE PPC44x_TLB_256K +#define mmu_virtual_psize MMU_PAGE_256K #else #error "Unsupported PAGE_SIZE" #endif +#define mmu_linear_psize MMU_PAGE_256M + #define PPC44x_PGD_OFF_SHIFT (32 - PGDIR_SHIFT + PGD_T_LOG2) #define PPC44x_PGD_OFF_MASK_BIT (PGDIR_SHIFT - PGD_T_LOG2) #define PPC44x_PTE_ADD_SHIFT (32 - PGDIR_SHIFT + PTE_SHIFT + PTE_T_LOG2) diff --git a/arch/powerpc/include/asm/mmu-8xx.h b/arch/powerpc/include/asm/mmu-8xx.h index 07865a35784..3d11d3ce79e 100644 --- a/arch/powerpc/include/asm/mmu-8xx.h +++ b/arch/powerpc/include/asm/mmu-8xx.h @@ -143,4 +143,7 @@ typedef struct { } mm_context_t; #endif /* !__ASSEMBLY__ */ +#define mmu_virtual_psize MMU_PAGE_4K +#define mmu_linear_psize MMU_PAGE_8M + #endif /* _ASM_POWERPC_MMU_8XX_H_ */ diff --git a/arch/powerpc/include/asm/mmu-hash32.h b/arch/powerpc/include/asm/mmu-hash32.h index 16b1a1e77e6..382fc689f20 100644 --- a/arch/powerpc/include/asm/mmu-hash32.h +++ b/arch/powerpc/include/asm/mmu-hash32.h @@ -80,4 +80,10 @@ typedef struct { #endif /* !__ASSEMBLY__ */ +/* We happily ignore the smaller BATs on 601, we don't actually use + * those definitions on hash32 at the moment anyway + */ +#define mmu_virtual_psize MMU_PAGE_4K +#define mmu_linear_psize MMU_PAGE_256M + #endif /* _ASM_POWERPC_MMU_HASH32_H_ */ diff --git a/arch/powerpc/include/asm/mmu_context.h b/arch/powerpc/include/asm/mmu_context.h index 8dffed31701..b34e94d9443 100644 --- a/arch/powerpc/include/asm/mmu_context.h +++ b/arch/powerpc/include/asm/mmu_context.h @@ -43,6 +43,10 @@ static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next, tsk->thread.pgdir = next->pgd; #endif /* CONFIG_PPC32 */ + /* 64-bit Book3E keeps track of current PGD in the PACA */ +#ifdef CONFIG_PPC_BOOK3E_64 + get_paca()->pgd = next->pgd; +#endif /* Nothing else to do if we aren't actually switching */ if (prev == next) return; @@ -89,6 +93,10 @@ static inline void activate_mm(struct mm_struct *prev, struct mm_struct *next) static inline void enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk) { + /* 64-bit Book3E keeps track of current PGD in the PACA */ +#ifdef CONFIG_PPC_BOOK3E_64 + get_paca()->pgd = NULL; +#endif } #endif /* __KERNEL__ */ diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c index a6b6c4c9ae4..65aced7b833 100644 --- a/arch/powerpc/kernel/setup_64.c +++ b/arch/powerpc/kernel/setup_64.c @@ -62,6 +62,7 @@ #include #include #include +#include #include "setup.h" @@ -147,6 +148,9 @@ void __init setup_paca(int cpu) { local_paca = &paca[cpu]; mtspr(SPRN_SPRG_PACA, local_paca); +#ifdef CONFIG_PPC_BOOK3E + mtspr(SPRN_SPRG_TLB_EXFRAME, local_paca->extlb); +#endif } /* diff --git a/arch/powerpc/mm/mmu_decl.h b/arch/powerpc/mm/mmu_decl.h index 3871dceee2d..5961c6b739d 100644 --- a/arch/powerpc/mm/mmu_decl.h +++ b/arch/powerpc/mm/mmu_decl.h @@ -41,7 +41,11 @@ static inline void _tlbil_pid(unsigned int pid) #else /* CONFIG_40x || CONFIG_8xx */ extern void _tlbil_all(void); extern void _tlbil_pid(unsigned int pid); +#ifdef CONFIG_PPC_BOOK3E +extern void _tlbil_pid_noind(unsigned int pid); +#else #define _tlbil_pid_noind(pid) _tlbil_pid(pid) +#endif #endif /* !(CONFIG_40x || CONFIG_8xx) */ /* @@ -53,7 +57,10 @@ static inline void _tlbil_va(unsigned long address, unsigned int pid, { asm volatile ("tlbie %0; sync" : : "r" (address) : "memory"); } -#else /* CONFIG_8xx */ +#elif defined(CONFIG_PPC_BOOK3E) +extern void _tlbil_va(unsigned long address, unsigned int pid, + unsigned int tsize, unsigned int ind); +#else extern void __tlbil_va(unsigned long address, unsigned int pid); static inline void _tlbil_va(unsigned long address, unsigned int pid, unsigned int tsize, unsigned int ind) @@ -67,11 +74,16 @@ static inline void _tlbil_va(unsigned long address, unsigned int pid, * implementation. When that becomes the case, this will be * an extern. */ +#ifdef CONFIG_PPC_BOOK3E +extern void _tlbivax_bcast(unsigned long address, unsigned int pid, + unsigned int tsize, unsigned int ind); +#else static inline void _tlbivax_bcast(unsigned long address, unsigned int pid, unsigned int tsize, unsigned int ind) { BUG(); } +#endif #else /* CONFIG_PPC_MMU_NOHASH */ diff --git a/arch/powerpc/mm/tlb_low_64e.S b/arch/powerpc/mm/tlb_low_64e.S new file mode 100644 index 00000000000..10d524ded7b --- /dev/null +++ b/arch/powerpc/mm/tlb_low_64e.S @@ -0,0 +1,734 @@ +/* + * Low leve TLB miss handlers for Book3E + * + * Copyright (C) 2008-2009 + * Ben. Herrenschmidt (benh@kernel.crashing.org), IBM Corp. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#ifdef CONFIG_PPC_64K_PAGES +#define VPTE_PMD_SHIFT (PTE_INDEX_SIZE+1) +#else +#define VPTE_PMD_SHIFT (PTE_INDEX_SIZE) +#endif +#define VPTE_PUD_SHIFT (VPTE_PMD_SHIFT + PMD_INDEX_SIZE) +#define VPTE_PGD_SHIFT (VPTE_PUD_SHIFT + PUD_INDEX_SIZE) +#define VPTE_INDEX_SIZE (VPTE_PGD_SHIFT + PGD_INDEX_SIZE) + + +/********************************************************************** + * * + * TLB miss handling for Book3E with TLB reservation and HES support * + * * + **********************************************************************/ + + +/* Data TLB miss */ + START_EXCEPTION(data_tlb_miss) + TLB_MISS_PROLOG + + /* Now we handle the fault proper. We only save DEAR in normal + * fault case since that's the only interesting values here. + * We could probably also optimize by not saving SRR0/1 in the + * linear mapping case but I'll leave that for later + */ + mfspr r14,SPRN_ESR + mfspr r16,SPRN_DEAR /* get faulting address */ + srdi r15,r16,60 /* get region */ + cmpldi cr0,r15,0xc /* linear mapping ? */ + TLB_MISS_STATS_SAVE_INFO + beq tlb_load_linear /* yes -> go to linear map load */ + + /* The page tables are mapped virtually linear. At this point, though, + * we don't know whether we are trying to fault in a first level + * virtual address or a virtual page table address. We can get that + * from bit 0x1 of the region ID which we have set for a page table + */ + andi. r10,r15,0x1 + bne- virt_page_table_tlb_miss + + std r14,EX_TLB_ESR(r12); /* save ESR */ + std r16,EX_TLB_DEAR(r12); /* save DEAR */ + + /* We need _PAGE_PRESENT and _PAGE_ACCESSED set */ + li r11,_PAGE_PRESENT + oris r11,r11,_PAGE_ACCESSED@h + + /* We do the user/kernel test for the PID here along with the RW test + */ + cmpldi cr0,r15,0 /* Check for user region */ + + /* We pre-test some combination of permissions to avoid double + * faults: + * + * We move the ESR:ST bit into the position of _PAGE_BAP_SW in the PTE + * ESR_ST is 0x00800000 + * _PAGE_BAP_SW is 0x00000010 + * So the shift is >> 19. This tests for supervisor writeability. + * If the page happens to be supervisor writeable and not user + * writeable, we will take a new fault later, but that should be + * a rare enough case. + * + * We also move ESR_ST in _PAGE_DIRTY position + * _PAGE_DIRTY is 0x00001000 so the shift is >> 11 + * + * MAS1 is preset for all we need except for TID that needs to + * be cleared for kernel translations + */ + rlwimi r11,r14,32-19,27,27 + rlwimi r11,r14,32-16,19,19 + beq normal_tlb_miss + /* XXX replace the RMW cycles with immediate loads + writes */ +1: mfspr r10,SPRN_MAS1 + cmpldi cr0,r15,8 /* Check for vmalloc region */ + rlwinm r10,r10,0,16,1 /* Clear TID */ + mtspr SPRN_MAS1,r10 + beq+ normal_tlb_miss + + /* We got a crappy address, just fault with whatever DEAR and ESR + * are here + */ + TLB_MISS_STATS_D(MMSTAT_TLB_MISS_NORM_FAULT) + TLB_MISS_EPILOG_ERROR + b exc_data_storage_book3e + +/* Instruction TLB miss */ + START_EXCEPTION(instruction_tlb_miss) + TLB_MISS_PROLOG + + /* If we take a recursive fault, the second level handler may need + * to know whether we are handling a data or instruction fault in + * order to get to the right store fault handler. We provide that + * info by writing a crazy value in ESR in our exception frame + */ + li r14,-1 /* store to exception frame is done later */ + + /* Now we handle the fault proper. We only save DEAR in the non + * linear mapping case since we know the linear mapping case will + * not re-enter. We could indeed optimize and also not save SRR0/1 + * in the linear mapping case but I'll leave that for later + * + * Faulting address is SRR0 which is already in r16 + */ + srdi r15,r16,60 /* get region */ + cmpldi cr0,r15,0xc /* linear mapping ? */ + TLB_MISS_STATS_SAVE_INFO + beq tlb_load_linear /* yes -> go to linear map load */ + + /* We do the user/kernel test for the PID here along with the RW test + */ + li r11,_PAGE_PRESENT|_PAGE_HWEXEC /* Base perm */ + oris r11,r11,_PAGE_ACCESSED@h + + cmpldi cr0,r15,0 /* Check for user region */ + std r14,EX_TLB_ESR(r12) /* write crazy -1 to frame */ + beq normal_tlb_miss + /* XXX replace the RMW cycles with immediate loads + writes */ +1: mfspr r10,SPRN_MAS1 + cmpldi cr0,r15,8 /* Check for vmalloc region */ + rlwinm r10,r10,0,16,1 /* Clear TID */ + mtspr SPRN_MAS1,r10 + beq+ normal_tlb_miss + + /* We got a crappy address, just fault */ + TLB_MISS_STATS_I(MMSTAT_TLB_MISS_NORM_FAULT) + TLB_MISS_EPILOG_ERROR + b exc_instruction_storage_book3e + +/* + * This is the guts of the first-level TLB miss handler for direct + * misses. We are entered with: + * + * r16 = faulting address + * r15 = region ID + * r14 = crap (free to use) + * r13 = PACA + * r12 = TLB exception frame in PACA + * r11 = PTE permission mask + * r10 = crap (free to use) + */ +normal_tlb_miss: + /* So we first construct the page table address. We do that by + * shifting the bottom of the address (not the region ID) by + * PAGE_SHIFT-3, clearing the bottom 3 bits (get a PTE ptr) and + * or'ing the fourth high bit. + * + * NOTE: For 64K pages, we do things slightly differently in + * order to handle the weird page table format used by linux + */ + ori r10,r15,0x1 +#ifdef CONFIG_PPC_64K_PAGES + /* For the top bits, 16 bytes per PTE */ + rldicl r14,r16,64-(PAGE_SHIFT-4),PAGE_SHIFT-4+4 + /* Now create the bottom bits as 0 in position 0x8000 and + * the rest calculated for 8 bytes per PTE + */ + rldicl r15,r16,64-(PAGE_SHIFT-3),64-15 + /* Insert the bottom bits in */ + rlwimi r14,r15,0,16,31 +#else + rldicl r14,r16,64-(PAGE_SHIFT-3),PAGE_SHIFT-3+4 +#endif + sldi r15,r10,60 + clrrdi r14,r14,3 + or r10,r15,r14 + + /* Set the TLB reservation and seach for existing entry. Then load + * the entry. + */ + PPC_TLBSRX_DOT(0,r16) + ld r14,0(r10) + beq normal_tlb_miss_done + +finish_normal_tlb_miss: + /* Check if required permissions are met */ + andc. r15,r11,r14 + bne- normal_tlb_miss_access_fault + + /* Now we build the MAS: + * + * MAS 0 : Fully setup with defaults in MAS4 and TLBnCFG + * MAS 1 : Almost fully setup + * - PID already updated by caller if necessary + * - TSIZE need change if !base page size, not + * yet implemented for now + * MAS 2 : Defaults not useful, need to be redone + * MAS 3+7 : Needs to be done + * + * TODO: mix up code below for better scheduling + */ + clrrdi r11,r16,12 /* Clear low crap in EA */ + rlwimi r11,r14,32-19,27,31 /* Insert WIMGE */ + mtspr SPRN_MAS2,r11 + + /* Check page size, if not standard, update MAS1 */ + rldicl r11,r14,64-8,64-8 +#ifdef CONFIG_PPC_64K_PAGES + cmpldi cr0,r11,BOOK3E_PAGESZ_64K +#else + cmpldi cr0,r11,BOOK3E_PAGESZ_4K +#endif + beq- 1f + mfspr r11,SPRN_MAS1 + rlwimi r11,r14,31,21,24 + rlwinm r11,r11,0,21,19 + mtspr SPRN_MAS1,r11 +1: + /* Move RPN in position */ + rldicr r11,r14,64-(PTE_RPN_SHIFT-PAGE_SHIFT),63-PAGE_SHIFT + clrldi r15,r11,12 /* Clear crap at the top */ + rlwimi r15,r14,32-8,22,25 /* Move in U bits */ + rlwimi r15,r14,32-2,26,31 /* Move in BAP bits */ + + /* Mask out SW and UW if !DIRTY (XXX optimize this !) */ + andi. r11,r14,_PAGE_DIRTY + bne 1f + li r11,MAS3_SW|MAS3_UW + andc r15,r15,r11 +1: mtspr SPRN_MAS7_MAS3,r15 + + tlbwe + +normal_tlb_miss_done: + /* We don't bother with restoring DEAR or ESR since we know we are + * level 0 and just going back to userland. They are only needed + * if you are going to take an access fault + */ + TLB_MISS_STATS_X(MMSTAT_TLB_MISS_NORM_OK) + TLB_MISS_EPILOG_SUCCESS + rfi + +normal_tlb_miss_access_fault: + /* We need to check if it was an instruction miss */ + andi. r10,r11,_PAGE_HWEXEC + bne 1f + ld r14,EX_TLB_DEAR(r12) + ld r15,EX_TLB_ESR(r12) + mtspr SPRN_DEAR,r14 + mtspr SPRN_ESR,r15 + TLB_MISS_STATS_D(MMSTAT_TLB_MISS_NORM_FAULT) + TLB_MISS_EPILOG_ERROR + b exc_data_storage_book3e +1: TLB_MISS_STATS_I(MMSTAT_TLB_MISS_NORM_FAULT) + TLB_MISS_EPILOG_ERROR + b exc_instruction_storage_book3e + + +/* + * This is the guts of the second-level TLB miss handler for direct + * misses. We are entered with: + * + * r16 = virtual page table faulting address + * r15 = region (top 4 bits of address) + * r14 = crap (free to use) + * r13 = PACA + * r12 = TLB exception frame in PACA + * r11 = crap (free to use) + * r10 = crap (free to use) + * + * Note that this should only ever be called as a second level handler + * with the current scheme when using SW load. + * That means we can always get the original fault DEAR at + * EX_TLB_DEAR-EX_TLB_SIZE(r12) + * + * It can be re-entered by the linear mapping miss handler. However, to + * avoid too much complication, it will restart the whole fault at level + * 0 so we don't care too much about clobbers + * + * XXX That code was written back when we couldn't clobber r14. We can now, + * so we could probably optimize things a bit + */ +virt_page_table_tlb_miss: + /* Are we hitting a kernel page table ? */ + andi. r10,r15,0x8 + + /* The cool thing now is that r10 contains 0 for user and 8 for kernel, + * and we happen to have the swapper_pg_dir at offset 8 from the user + * pgdir in the PACA :-). + */ + add r11,r10,r13 + + /* If kernel, we need to clear MAS1 TID */ + beq 1f + /* XXX replace the RMW cycles with immediate loads + writes */ + mfspr r10,SPRN_MAS1 + rlwinm r10,r10,0,16,1 /* Clear TID */ + mtspr SPRN_MAS1,r10 +1: + /* Search if we already have a TLB entry for that virtual address, and + * if we do, bail out. + */ + PPC_TLBSRX_DOT(0,r16) + beq virt_page_table_tlb_miss_done + + /* Now, we need to walk the page tables. First check if we are in + * range. + */ + rldicl. r10,r16,64-(VPTE_INDEX_SIZE+3),VPTE_INDEX_SIZE+3+4 + bne- virt_page_table_tlb_miss_fault + + /* Get the PGD pointer */ + ld r15,PACAPGD(r11) + cmpldi cr0,r15,0 + beq- virt_page_table_tlb_miss_fault + + /* Get to PGD entry */ + rldicl r11,r16,64-VPTE_PGD_SHIFT,64-PGD_INDEX_SIZE-3 + clrrdi r10,r11,3 + ldx r15,r10,r15 + cmpldi cr0,r15,0 + beq virt_page_table_tlb_miss_fault + +#ifndef CONFIG_PPC_64K_PAGES + /* Get to PUD entry */ + rldicl r11,r16,64-VPTE_PUD_SHIFT,64-PUD_INDEX_SIZE-3 + clrrdi r10,r11,3 + ldx r15,r10,r15 + cmpldi cr0,r15,0 + beq virt_page_table_tlb_miss_fault +#endif /* CONFIG_PPC_64K_PAGES */ + + /* Get to PMD entry */ + rldicl r11,r16,64-VPTE_PMD_SHIFT,64-PMD_INDEX_SIZE-3 + clrrdi r10,r11,3 + ldx r15,r10,r15 + cmpldi cr0,r15,0 + beq virt_page_table_tlb_miss_fault + + /* Ok, we're all right, we can now create a kernel translation for + * a 4K or 64K page from r16 -> r15. + */ + /* Now we build the MAS: + * + * MAS 0 : Fully setup with defaults in MAS4 and TLBnCFG + * MAS 1 : Almost fully setup + * - PID already updated by caller if necessary + * - TSIZE for now is base page size always + * MAS 2 : Use defaults + * MAS 3+7 : Needs to be done + * + * So we only do MAS 2 and 3 for now... + */ + clrldi r11,r15,4 /* remove region ID from RPN */ + ori r10,r11,1 /* Or-in SR */ + mtspr SPRN_MAS7_MAS3,r10 + + tlbwe + +virt_page_table_tlb_miss_done: + + /* We have overriden MAS2:EPN but currently our primary TLB miss + * handler will always restore it so that should not be an issue, + * if we ever optimize the primary handler to not write MAS2 on + * some cases, we'll have to restore MAS2:EPN here based on the + * original fault's DEAR. If we do that we have to modify the + * ITLB miss handler to also store SRR0 in the exception frame + * as DEAR. + * + * However, one nasty thing we did is we cleared the reservation + * (well, potentially we did). We do a trick here thus if we + * are not a level 0 exception (we interrupted the TLB miss) we + * offset the return address by -4 in order to replay the tlbsrx + * instruction there + */ + subf r10,r13,r12 + cmpldi cr0,r10,PACA_EXTLB+EX_TLB_SIZE + bne- 1f + ld r11,PACA_EXTLB+EX_TLB_SIZE+EX_TLB_SRR0(r13) + addi r10,r11,-4 + std r10,PACA_EXTLB+EX_TLB_SIZE+EX_TLB_SRR0(r13) +1: + /* Return to caller, normal case */ + TLB_MISS_STATS_X(MMSTAT_TLB_MISS_PT_OK); + TLB_MISS_EPILOG_SUCCESS + rfi + +virt_page_table_tlb_miss_fault: + /* If we fault here, things are a little bit tricky. We need to call + * either data or instruction store fault, and we need to retreive + * the original fault address and ESR (for data). + * + * The thing is, we know that in normal circumstances, this is + * always called as a second level tlb miss for SW load or as a first + * level TLB miss for HW load, so we should be able to peek at the + * relevant informations in the first exception frame in the PACA. + * + * However, we do need to double check that, because we may just hit + * a stray kernel pointer or a userland attack trying to hit those + * areas. If that is the case, we do a data fault. (We can't get here + * from an instruction tlb miss anyway). + * + * Note also that when going to a fault, we must unwind the previous + * level as well. Since we are doing that, we don't need to clear or + * restore the TLB reservation neither. + */ + subf r10,r13,r12 + cmpldi cr0,r10,PACA_EXTLB+EX_TLB_SIZE + bne- virt_page_table_tlb_miss_whacko_fault + + /* We dig the original DEAR and ESR from slot 0 */ + ld r15,EX_TLB_DEAR+PACA_EXTLB(r13) + ld r16,EX_TLB_ESR+PACA_EXTLB(r13) + + /* We check for the "special" ESR value for instruction faults */ + cmpdi cr0,r16,-1 + beq 1f + mtspr SPRN_DEAR,r15 + mtspr SPRN_ESR,r16 + TLB_MISS_STATS_D(MMSTAT_TLB_MISS_PT_FAULT); + TLB_MISS_EPILOG_ERROR + b exc_data_storage_book3e +1: TLB_MISS_STATS_I(MMSTAT_TLB_MISS_PT_FAULT); + TLB_MISS_EPILOG_ERROR + b exc_instruction_storage_book3e + +virt_page_table_tlb_miss_whacko_fault: + /* The linear fault will restart everything so ESR and DEAR will + * not have been clobbered, let's just fault with what we have + */ + TLB_MISS_STATS_X(MMSTAT_TLB_MISS_PT_FAULT); + TLB_MISS_EPILOG_ERROR + b exc_data_storage_book3e + + +/************************************************************** + * * + * TLB miss handling for Book3E with hw page table support * + * * + **************************************************************/ + + +/* Data TLB miss */ + START_EXCEPTION(data_tlb_miss_htw) + TLB_MISS_PROLOG + + /* Now we handle the fault proper. We only save DEAR in normal + * fault case since that's the only interesting values here. + * We could probably also optimize by not saving SRR0/1 in the + * linear mapping case but I'll leave that for later + */ + mfspr r14,SPRN_ESR + mfspr r16,SPRN_DEAR /* get faulting address */ + srdi r11,r16,60 /* get region */ + cmpldi cr0,r11,0xc /* linear mapping ? */ + TLB_MISS_STATS_SAVE_INFO + beq tlb_load_linear /* yes -> go to linear map load */ + + /* We do the user/kernel test for the PID here along with the RW test + */ + cmpldi cr0,r11,0 /* Check for user region */ + ld r15,PACAPGD(r13) /* Load user pgdir */ + beq htw_tlb_miss + + /* XXX replace the RMW cycles with immediate loads + writes */ +1: mfspr r10,SPRN_MAS1 + cmpldi cr0,r11,8 /* Check for vmalloc region */ + rlwinm r10,r10,0,16,1 /* Clear TID */ + mtspr SPRN_MAS1,r10 + ld r15,PACA_KERNELPGD(r13) /* Load kernel pgdir */ + beq+ htw_tlb_miss + + /* We got a crappy address, just fault with whatever DEAR and ESR + * are here + */ + TLB_MISS_STATS_D(MMSTAT_TLB_MISS_NORM_FAULT) + TLB_MISS_EPILOG_ERROR + b exc_data_storage_book3e + +/* Instruction TLB miss */ + START_EXCEPTION(instruction_tlb_miss_htw) + TLB_MISS_PROLOG + + /* If we take a recursive fault, the second level handler may need + * to know whether we are handling a data or instruction fault in + * order to get to the right store fault handler. We provide that + * info by keeping a crazy value for ESR in r14 + */ + li r14,-1 /* store to exception frame is done later */ + + /* Now we handle the fault proper. We only save DEAR in the non + * linear mapping case since we know the linear mapping case will + * not re-enter. We could indeed optimize and also not save SRR0/1 + * in the linear mapping case but I'll leave that for later + * + * Faulting address is SRR0 which is already in r16 + */ + srdi r11,r16,60 /* get region */ + cmpldi cr0,r11,0xc /* linear mapping ? */ + TLB_MISS_STATS_SAVE_INFO + beq tlb_load_linear /* yes -> go to linear map load */ + + /* We do the user/kernel test for the PID here along with the RW test + */ + cmpldi cr0,r11,0 /* Check for user region */ + ld r15,PACAPGD(r13) /* Load user pgdir */ + beq htw_tlb_miss + + /* XXX replace the RMW cycles with immediate loads + writes */ +1: mfspr r10,SPRN_MAS1 + cmpldi cr0,r11,8 /* Check for vmalloc region */ + rlwinm r10,r10,0,16,1 /* Clear TID */ + mtspr SPRN_MAS1,r10 + ld r15,PACA_KERNELPGD(r13) /* Load kernel pgdir */ + beq+ htw_tlb_miss + + /* We got a crappy address, just fault */ + TLB_MISS_STATS_I(MMSTAT_TLB_MISS_NORM_FAULT) + TLB_MISS_EPILOG_ERROR + b exc_instruction_storage_book3e + + +/* + * This is the guts of the second-level TLB miss handler for direct + * misses. We are entered with: + * + * r16 = virtual page table faulting address + * r15 = PGD pointer + * r14 = ESR + * r13 = PACA + * r12 = TLB exception frame in PACA + * r11 = crap (free to use) + * r10 = crap (free to use) + * + * It can be re-entered by the linear mapping miss handler. However, to + * avoid too much complication, it will save/restore things for us + */ +htw_tlb_miss: + /* Search if we already have a TLB entry for that virtual address, and + * if we do, bail out. + * + * MAS1:IND should be already set based on MAS4 + */ + PPC_TLBSRX_DOT(0,r16) + beq htw_tlb_miss_done + + /* Now, we need to walk the page tables. First check if we are in + * range. + */ + rldicl. r10,r16,64-PGTABLE_EADDR_SIZE,PGTABLE_EADDR_SIZE+4 + bne- htw_tlb_miss_fault + + /* Get the PGD pointer */ + cmpldi cr0,r15,0 + beq- htw_tlb_miss_fault + + /* Get to PGD entry */ + rldicl r11,r16,64-(PGDIR_SHIFT-3),64-PGD_INDEX_SIZE-3 + clrrdi r10,r11,3 + ldx r15,r10,r15 + cmpldi cr0,r15,0 + beq htw_tlb_miss_fault + +#ifndef CONFIG_PPC_64K_PAGES + /* Get to PUD entry */ + rldicl r11,r16,64-(PUD_SHIFT-3),64-PUD_INDEX_SIZE-3 + clrrdi r10,r11,3 + ldx r15,r10,r15 + cmpldi cr0,r15,0 + beq htw_tlb_miss_fault +#endif /* CONFIG_PPC_64K_PAGES */ + + /* Get to PMD entry */ + rldicl r11,r16,64-(PMD_SHIFT-3),64-PMD_INDEX_SIZE-3 + clrrdi r10,r11,3 + ldx r15,r10,r15 + cmpldi cr0,r15,0 + beq htw_tlb_miss_fault + + /* Ok, we're all right, we can now create an indirect entry for + * a 1M or 256M page. + * + * The last trick is now that because we use "half" pages for + * the HTW (1M IND is 2K and 256M IND is 32K) we need to account + * for an added LSB bit to the RPN. For 64K pages, there is no + * problem as we already use 32K arrays (half PTE pages), but for + * 4K page we need to extract a bit from the virtual address and + * insert it into the "PA52" bit of the RPN. + */ +#ifndef CONFIG_PPC_64K_PAGES + rlwimi r15,r16,32-9,20,20 +#endif + /* Now we build the MAS: + * + * MAS 0 : Fully setup with defaults in MAS4 and TLBnCFG + * MAS 1 : Almost fully setup + * - PID already updated by caller if necessary + * - TSIZE for now is base ind page size always + * MAS 2 : Use defaults + * MAS 3+7 : Needs to be done + */ +#ifdef CONFIG_PPC_64K_PAGES + ori r10,r15,(BOOK3E_PAGESZ_64K << MAS3_SPSIZE_SHIFT) +#else + ori r10,r15,(BOOK3E_PAGESZ_4K << MAS3_SPSIZE_SHIFT) +#endif + mtspr SPRN_MAS7_MAS3,r10 + + tlbwe + +htw_tlb_miss_done: + /* We don't bother with restoring DEAR or ESR since we know we are + * level 0 and just going back to userland. They are only needed + * if you are going to take an access fault + */ + TLB_MISS_STATS_X(MMSTAT_TLB_MISS_PT_OK) + TLB_MISS_EPILOG_SUCCESS + rfi + +htw_tlb_miss_fault: + /* We need to check if it was an instruction miss. We know this + * though because r14 would contain -1 + */ + cmpdi cr0,r14,-1 + beq 1f + mtspr SPRN_DEAR,r16 + mtspr SPRN_ESR,r14 + TLB_MISS_STATS_D(MMSTAT_TLB_MISS_PT_FAULT) + TLB_MISS_EPILOG_ERROR + b exc_data_storage_book3e +1: TLB_MISS_STATS_I(MMSTAT_TLB_MISS_PT_FAULT) + TLB_MISS_EPILOG_ERROR + b exc_instruction_storage_book3e + +/* + * This is the guts of "any" level TLB miss handler for kernel linear + * mapping misses. We are entered with: + * + * + * r16 = faulting address + * r15 = crap (free to use) + * r14 = ESR (data) or -1 (instruction) + * r13 = PACA + * r12 = TLB exception frame in PACA + * r11 = crap (free to use) + * r10 = crap (free to use) + * + * In addition we know that we will not re-enter, so in theory, we could + * use a simpler epilog not restoring SRR0/1 etc.. but we'll do that later. + * + * We also need to be careful about MAS registers here & TLB reservation, + * as we know we'll have clobbered them if we interrupt the main TLB miss + * handlers in which case we probably want to do a full restart at level + * 0 rather than saving / restoring the MAS. + * + * Note: If we care about performance of that core, we can easily shuffle + * a few things around + */ +tlb_load_linear: + /* For now, we assume the linear mapping is contiguous and stops at + * linear_map_top. We also assume the size is a multiple of 1G, thus + * we only use 1G pages for now. That might have to be changed in a + * final implementation, especially when dealing with hypervisors + */ + ld r11,PACATOC(r13) + ld r11,linear_map_top@got(r11) + ld r10,0(r11) + cmpld cr0,r10,r16 + bge tlb_load_linear_fault + + /* MAS1 need whole new setup. */ + li r15,(BOOK3E_PAGESZ_1GB< - * IBM Corp. + * Copyright 2008,2009 Ben Herrenschmidt + * IBM Corp. * * Derived from arch/ppc/mm/init.c: * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org) @@ -34,12 +34,70 @@ #include #include #include +#include #include #include +#include #include "mmu_decl.h" +#ifdef CONFIG_PPC_BOOK3E +struct mmu_psize_def mmu_psize_defs[MMU_PAGE_COUNT] = { + [MMU_PAGE_4K] = { + .shift = 12, + .enc = BOOK3E_PAGESZ_4K, + }, + [MMU_PAGE_16K] = { + .shift = 14, + .enc = BOOK3E_PAGESZ_16K, + }, + [MMU_PAGE_64K] = { + .shift = 16, + .enc = BOOK3E_PAGESZ_64K, + }, + [MMU_PAGE_1M] = { + .shift = 20, + .enc = BOOK3E_PAGESZ_1M, + }, + [MMU_PAGE_16M] = { + .shift = 24, + .enc = BOOK3E_PAGESZ_16M, + }, + [MMU_PAGE_256M] = { + .shift = 28, + .enc = BOOK3E_PAGESZ_256M, + }, + [MMU_PAGE_1G] = { + .shift = 30, + .enc = BOOK3E_PAGESZ_1GB, + }, +}; +static inline int mmu_get_tsize(int psize) +{ + return mmu_psize_defs[psize].enc; +} +#else +static inline int mmu_get_tsize(int psize) +{ + /* This isn't used on !Book3E for now */ + return 0; +} +#endif + +/* The variables below are currently only used on 64-bit Book3E + * though this will probably be made common with other nohash + * implementations at some point + */ +#ifdef CONFIG_PPC64 + +int mmu_linear_psize; /* Page size used for the linear mapping */ +int mmu_pte_psize; /* Page size used for PTE pages */ +int book3e_htw_enabled; /* Is HW tablewalk enabled ? */ +unsigned long linear_map_top; /* Top of linear mapping */ + +#endif /* CONFIG_PPC64 */ + /* * Base TLB flushing operations: * @@ -82,7 +140,7 @@ void __local_flush_tlb_page(struct mm_struct *mm, unsigned long vmaddr, void local_flush_tlb_page(struct vm_area_struct *vma, unsigned long vmaddr) { __local_flush_tlb_page(vma ? vma->vm_mm : NULL, vmaddr, - 0 /* tsize unused for now */, 0); + mmu_get_tsize(mmu_virtual_psize), 0); } EXPORT_SYMBOL(local_flush_tlb_page); @@ -198,7 +256,7 @@ void __flush_tlb_page(struct mm_struct *mm, unsigned long vmaddr, void flush_tlb_page(struct vm_area_struct *vma, unsigned long vmaddr) { __flush_tlb_page(vma ? vma->vm_mm : NULL, vmaddr, - 0 /* tsize unused for now */, 0); + mmu_get_tsize(mmu_virtual_psize), 0); } EXPORT_SYMBOL(flush_tlb_page); @@ -241,3 +299,140 @@ void tlb_flush(struct mmu_gather *tlb) /* Push out batch of freed page tables */ pte_free_finish(); } + +/* + * Below are functions specific to the 64-bit variant of Book3E though that + * may change in the future + */ + +#ifdef CONFIG_PPC64 + +/* + * Handling of virtual linear page tables or indirect TLB entries + * flushing when PTE pages are freed + */ +void tlb_flush_pgtable(struct mmu_gather *tlb, unsigned long address) +{ + int tsize = mmu_psize_defs[mmu_pte_psize].enc; + + if (book3e_htw_enabled) { + unsigned long start = address & PMD_MASK; + unsigned long end = address + PMD_SIZE; + unsigned long size = 1UL << mmu_psize_defs[mmu_pte_psize].shift; + + /* This isn't the most optimal, ideally we would factor out the + * while preempt & CPU mask mucking around, or even the IPI but + * it will do for now + */ + while (start < end) { + __flush_tlb_page(tlb->mm, start, tsize, 1); + start += size; + } + } else { + unsigned long rmask = 0xf000000000000000ul; + unsigned long rid = (address & rmask) | 0x1000000000000000ul; + unsigned long vpte = address & ~rmask; + +#ifdef CONFIG_PPC_64K_PAGES + vpte = (vpte >> (PAGE_SHIFT - 4)) & ~0xfffful; +#else + vpte = (vpte >> (PAGE_SHIFT - 3)) & ~0xffful; +#endif + vpte |= rid; + __flush_tlb_page(tlb->mm, vpte, tsize, 0); + } +} + +/* + * Early initialization of the MMU TLB code + */ +static void __early_init_mmu(int boot_cpu) +{ + extern unsigned int interrupt_base_book3e; + extern unsigned int exc_data_tlb_miss_htw_book3e; + extern unsigned int exc_instruction_tlb_miss_htw_book3e; + + unsigned int *ibase = &interrupt_base_book3e; + unsigned int mas4; + + /* XXX This will have to be decided at runtime, but right + * now our boot and TLB miss code hard wires it + */ + mmu_linear_psize = MMU_PAGE_1G; + + + /* Check if HW tablewalk is present, and if yes, enable it by: + * + * - patching the TLB miss handlers to branch to the + * one dedicates to it + * + * - setting the global book3e_htw_enabled + * + * - Set MAS4:INDD and default page size + */ + + /* XXX This code only checks for TLB 0 capabilities and doesn't + * check what page size combos are supported by the HW. It + * also doesn't handle the case where a separate array holds + * the IND entries from the array loaded by the PT. + */ + if (boot_cpu) { + unsigned int tlb0cfg = mfspr(SPRN_TLB0CFG); + + /* Check if HW loader is supported */ + if ((tlb0cfg & TLBnCFG_IND) && + (tlb0cfg & TLBnCFG_PT)) { + patch_branch(ibase + (0x1c0 / 4), + (unsigned long)&exc_data_tlb_miss_htw_book3e, 0); + patch_branch(ibase + (0x1e0 / 4), + (unsigned long)&exc_instruction_tlb_miss_htw_book3e, 0); + book3e_htw_enabled = 1; + } + pr_info("MMU: Book3E Page Tables %s\n", + book3e_htw_enabled ? "Enabled" : "Disabled"); + } + + /* Set MAS4 based on page table setting */ + + mas4 = 0x4 << MAS4_WIMGED_SHIFT; + if (book3e_htw_enabled) { + mas4 |= mas4 | MAS4_INDD; +#ifdef CONFIG_PPC_64K_PAGES + mas4 |= BOOK3E_PAGESZ_256M << MAS4_TSIZED_SHIFT; + mmu_pte_psize = MMU_PAGE_256M; +#else + mas4 |= BOOK3E_PAGESZ_1M << MAS4_TSIZED_SHIFT; + mmu_pte_psize = MMU_PAGE_1M; +#endif + } else { +#ifdef CONFIG_PPC_64K_PAGES + mas4 |= BOOK3E_PAGESZ_64K << MAS4_TSIZED_SHIFT; +#else + mas4 |= BOOK3E_PAGESZ_4K << MAS4_TSIZED_SHIFT; +#endif + mmu_pte_psize = mmu_virtual_psize; + } + mtspr(SPRN_MAS4, mas4); + + /* Set the global containing the top of the linear mapping + * for use by the TLB miss code + */ + linear_map_top = lmb_end_of_DRAM(); + + /* A sync won't hurt us after mucking around with + * the MMU configuration + */ + mb(); +} + +void __init early_init_mmu(void) +{ + __early_init_mmu(1); +} + +void __cpuinit early_init_mmu_secondary(void) +{ + __early_init_mmu(0); +} + +#endif /* CONFIG_PPC64 */ diff --git a/arch/powerpc/mm/tlb_nohash_low.S b/arch/powerpc/mm/tlb_nohash_low.S index c7d89a0adba..7bcd9fbf6cc 100644 --- a/arch/powerpc/mm/tlb_nohash_low.S +++ b/arch/powerpc/mm/tlb_nohash_low.S @@ -191,6 +191,85 @@ ALT_MMU_FTR_SECTION_END_IFCLR(MMU_FTR_USE_TLBILX) isync 1: wrtee r10 blr +#elif defined(CONFIG_PPC_BOOK3E) +/* + * New Book3E (>= 2.06) implementation + * + * Note: We may be able to get away without the interrupt masking stuff + * if we save/restore MAS6 on exceptions that might modify it + */ +_GLOBAL(_tlbil_pid) + slwi r4,r3,MAS6_SPID_SHIFT + mfmsr r10 + wrteei 0 + mtspr SPRN_MAS6,r4 + PPC_TLBILX_PID(0,0) + wrtee r10 + msync + isync + blr + +_GLOBAL(_tlbil_pid_noind) + slwi r4,r3,MAS6_SPID_SHIFT + mfmsr r10 + ori r4,r4,MAS6_SIND + wrteei 0 + mtspr SPRN_MAS6,r4 + PPC_TLBILX_PID(0,0) + wrtee r10 + msync + isync + blr + +_GLOBAL(_tlbil_all) + PPC_TLBILX_ALL(0,0) + msync + isync + blr + +_GLOBAL(_tlbil_va) + mfmsr r10 + wrteei 0 + cmpwi cr0,r6,0 + slwi r4,r4,MAS6_SPID_SHIFT + rlwimi r4,r5,MAS6_ISIZE_SHIFT,MAS6_ISIZE_MASK + beq 1f + rlwimi r4,r6,MAS6_SIND_SHIFT,MAS6_SIND +1: mtspr SPRN_MAS6,r4 /* assume AS=0 for now */ + PPC_TLBILX_VA(0,r3) + msync + isync + wrtee r10 + blr + +_GLOBAL(_tlbivax_bcast) + mfmsr r10 + wrteei 0 + cmpwi cr0,r6,0 + slwi r4,r4,MAS6_SPID_SHIFT + rlwimi r4,r5,MAS6_ISIZE_SHIFT,MAS6_ISIZE_MASK + beq 1f + rlwimi r4,r6,MAS6_SIND_SHIFT,MAS6_SIND +1: mtspr SPRN_MAS6,r4 /* assume AS=0 for now */ + PPC_TLBIVAX(0,r3) + eieio + tlbsync + sync + wrtee r10 + blr + +_GLOBAL(set_context) +#ifdef CONFIG_BDI_SWITCH + /* Context switch the PTE pointer for the Abatron BDI2000. + * The PGDIR is the second parameter. + */ + lis r5, abatron_pteptrs@h + ori r5, r5, abatron_pteptrs@l + stw r4, 0x4(r5) +#endif + mtspr SPRN_PID,r3 + isync /* Force context change */ + blr #else #error Unsupported processor type ! #endif -- cgit v1.2.3-70-g09d2 From 32a74949b7337726e76d69f51c48715431126c6c Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Thu, 23 Jul 2009 23:15:58 +0000 Subject: powerpc/mm: Add support for SPARSEMEM_VMEMMAP on 64-bit Book3E The base TLB support didn't include support for SPARSEMEM_VMEMMAP, though we did carve out some virtual space for it, the necessary support code wasn't there. This implements it by using 16M pages for now, though the page size could easily be changed at runtime if necessary. Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/include/asm/mmu-book3e.h | 1 + arch/powerpc/include/asm/pgtable-ppc64.h | 3 +- arch/powerpc/mm/init_64.c | 55 ++++++++++++++++++++++++++++---- arch/powerpc/mm/mmu_decl.h | 7 +++- arch/powerpc/mm/pgtable_64.c | 2 +- arch/powerpc/mm/tlb_nohash.c | 11 ++++++- 6 files changed, 68 insertions(+), 11 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/include/asm/mmu-book3e.h b/arch/powerpc/include/asm/mmu-book3e.h index 6ddbe48d07f..d7458046936 100644 --- a/arch/powerpc/include/asm/mmu-book3e.h +++ b/arch/powerpc/include/asm/mmu-book3e.h @@ -196,6 +196,7 @@ extern struct mmu_psize_def mmu_psize_defs[MMU_PAGE_COUNT]; #endif extern int mmu_linear_psize; +extern int mmu_vmemmap_psize; #endif /* !__ASSEMBLY__ */ diff --git a/arch/powerpc/include/asm/pgtable-ppc64.h b/arch/powerpc/include/asm/pgtable-ppc64.h index 7254c5a3187..200ec2dfa03 100644 --- a/arch/powerpc/include/asm/pgtable-ppc64.h +++ b/arch/powerpc/include/asm/pgtable-ppc64.h @@ -46,6 +46,7 @@ /* * The vmalloc space starts at the beginning of that region, and * occupies half of it on hash CPUs and a quarter of it on Book3E + * (we keep a quarter for the virtual memmap) */ #define VMALLOC_START KERN_VIRT_START #ifdef CONFIG_PPC_BOOK3E @@ -83,7 +84,7 @@ #define VMALLOC_REGION_ID (REGION_ID(VMALLOC_START)) #define KERNEL_REGION_ID (REGION_ID(PAGE_OFFSET)) -#define VMEMMAP_REGION_ID (0xfUL) +#define VMEMMAP_REGION_ID (0xfUL) /* Server only */ #define USER_REGION_ID (0UL) /* diff --git a/arch/powerpc/mm/init_64.c b/arch/powerpc/mm/init_64.c index 68a821add28..31582329cd6 100644 --- a/arch/powerpc/mm/init_64.c +++ b/arch/powerpc/mm/init_64.c @@ -205,6 +205,47 @@ static int __meminit vmemmap_populated(unsigned long start, int page_size) return 0; } +/* On hash-based CPUs, the vmemmap is bolted in the hash table. + * + * On Book3E CPUs, the vmemmap is currently mapped in the top half of + * the vmalloc space using normal page tables, though the size of + * pages encoded in the PTEs can be different + */ + +#ifdef CONFIG_PPC_BOOK3E +static void __meminit vmemmap_create_mapping(unsigned long start, + unsigned long page_size, + unsigned long phys) +{ + /* Create a PTE encoding without page size */ + unsigned long i, flags = _PAGE_PRESENT | _PAGE_ACCESSED | + _PAGE_KERNEL_RW; + + /* PTEs only contain page size encodings up to 32M */ + BUG_ON(mmu_psize_defs[mmu_vmemmap_psize].enc > 0xf); + + /* Encode the size in the PTE */ + flags |= mmu_psize_defs[mmu_vmemmap_psize].enc << 8; + + /* For each PTE for that area, map things. Note that we don't + * increment phys because all PTEs are of the large size and + * thus must have the low bits clear + */ + for (i = 0; i < page_size; i += PAGE_SIZE) + BUG_ON(map_kernel_page(start + i, phys, flags)); +} +#else /* CONFIG_PPC_BOOK3E */ +static void __meminit vmemmap_create_mapping(unsigned long start, + unsigned long page_size, + unsigned long phys) +{ + int mapped = htab_bolt_mapping(start, start + page_size, phys, + PAGE_KERNEL, mmu_vmemmap_psize, + mmu_kernel_ssize); + BUG_ON(mapped < 0); +} +#endif /* CONFIG_PPC_BOOK3E */ + int __meminit vmemmap_populate(struct page *start_page, unsigned long nr_pages, int node) { @@ -215,8 +256,11 @@ int __meminit vmemmap_populate(struct page *start_page, /* Align to the page size of the linear mapping. */ start = _ALIGN_DOWN(start, page_size); + pr_debug("vmemmap_populate page %p, %ld pages, node %d\n", + start_page, nr_pages, node); + pr_debug(" -> map %lx..%lx\n", start, end); + for (; start < end; start += page_size) { - int mapped; void *p; if (vmemmap_populated(start, page_size)) @@ -226,13 +270,10 @@ int __meminit vmemmap_populate(struct page *start_page, if (!p) return -ENOMEM; - pr_debug("vmemmap %08lx allocated at %p, physical %08lx.\n", - start, p, __pa(p)); + pr_debug(" * %016lx..%016lx allocated at %p\n", + start, start + page_size, p); - mapped = htab_bolt_mapping(start, start + page_size, __pa(p), - pgprot_val(PAGE_KERNEL), - mmu_vmemmap_psize, mmu_kernel_ssize); - BUG_ON(mapped < 0); + vmemmap_create_mapping(start, page_size, __pa(p)); } return 0; diff --git a/arch/powerpc/mm/mmu_decl.h b/arch/powerpc/mm/mmu_decl.h index 5961c6b739d..d2e5321d5ea 100644 --- a/arch/powerpc/mm/mmu_decl.h +++ b/arch/powerpc/mm/mmu_decl.h @@ -121,7 +121,12 @@ extern unsigned int rtas_data, rtas_size; struct hash_pte; extern struct hash_pte *Hash, *Hash_end; extern unsigned long Hash_size, Hash_mask; -#endif + +#endif /* CONFIG_PPC32 */ + +#ifdef CONFIG_PPC64 +extern int map_kernel_page(unsigned long ea, unsigned long pa, int flags); +#endif /* CONFIG_PPC64 */ extern unsigned long ioremap_bot; extern unsigned long __max_low_memory; diff --git a/arch/powerpc/mm/pgtable_64.c b/arch/powerpc/mm/pgtable_64.c index 93ed1a3c872..853d5565eed 100644 --- a/arch/powerpc/mm/pgtable_64.c +++ b/arch/powerpc/mm/pgtable_64.c @@ -79,7 +79,7 @@ static void *early_alloc_pgtable(unsigned long size) * map_kernel_page adds an entry to the ioremap page table * and adds an entry to the HPT, possibly bolting it */ -static int map_kernel_page(unsigned long ea, unsigned long pa, int flags) +int map_kernel_page(unsigned long ea, unsigned long pa, int flags) { pgd_t *pgdp; pud_t *pudp; diff --git a/arch/powerpc/mm/tlb_nohash.c b/arch/powerpc/mm/tlb_nohash.c index d16100c9416..2fbc680c2c7 100644 --- a/arch/powerpc/mm/tlb_nohash.c +++ b/arch/powerpc/mm/tlb_nohash.c @@ -93,6 +93,7 @@ static inline int mmu_get_tsize(int psize) int mmu_linear_psize; /* Page size used for the linear mapping */ int mmu_pte_psize; /* Page size used for PTE pages */ +int mmu_vmemmap_psize; /* Page size used for the virtual mem map */ int book3e_htw_enabled; /* Is HW tablewalk enabled ? */ unsigned long linear_map_top; /* Top of linear mapping */ @@ -356,10 +357,18 @@ static void __early_init_mmu(int boot_cpu) unsigned int mas4; /* XXX This will have to be decided at runtime, but right - * now our boot and TLB miss code hard wires it + * now our boot and TLB miss code hard wires it. Ideally + * we should find out a suitable page size and patch the + * TLB miss code (either that or use the PACA to store + * the value we want) */ mmu_linear_psize = MMU_PAGE_1G; + /* XXX This should be decided at runtime based on supported + * page sizes in the TLB, but for now let's assume 16M is + * always there and a good fit (which it probably is) + */ + mmu_vmemmap_psize = MMU_PAGE_16M; /* Check if HW tablewalk is present, and if yes, enable it by: * -- cgit v1.2.3-70-g09d2 From 2d27cfd3286966c04d4192a9db5a6c7ea60eebf1 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Thu, 23 Jul 2009 23:15:59 +0000 Subject: powerpc: Remaining 64-bit Book3E support This contains all the bits that didn't fit in previous patches :-) This includes the actual exception handlers assembly, the changes to the kernel entry, other misc bits and wiring it all up in Kconfig. Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/Kconfig | 2 +- arch/powerpc/include/asm/hw_irq.h | 5 + arch/powerpc/include/asm/smp.h | 1 + arch/powerpc/kernel/Makefile | 10 +- arch/powerpc/kernel/cputable.c | 27 +- arch/powerpc/kernel/entry_64.S | 60 ++- arch/powerpc/kernel/exceptions-64e.S | 784 +++++++++++++++++++++++++++++++++ arch/powerpc/kernel/head_64.S | 68 ++- arch/powerpc/kernel/setup_64.c | 19 + arch/powerpc/mm/Makefile | 1 + arch/powerpc/platforms/Kconfig.cputype | 38 +- arch/powerpc/xmon/xmon.c | 2 +- 12 files changed, 993 insertions(+), 24 deletions(-) create mode 100644 arch/powerpc/kernel/exceptions-64e.S (limited to 'arch') diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index 52349ef1b3a..4c0747e8ed7 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -472,7 +472,7 @@ config PPC_16K_PAGES bool "16k page size" if 44x config PPC_64K_PAGES - bool "64k page size" if 44x || PPC_STD_MMU_64 + bool "64k page size" if 44x || PPC_STD_MMU_64 || PPC_BOOK3E_64 select PPC_HAS_HASH_64K if PPC_STD_MMU_64 config PPC_256K_PAGES diff --git a/arch/powerpc/include/asm/hw_irq.h b/arch/powerpc/include/asm/hw_irq.h index 8b505eaaa38..e73d554538d 100644 --- a/arch/powerpc/include/asm/hw_irq.h +++ b/arch/powerpc/include/asm/hw_irq.h @@ -49,8 +49,13 @@ extern void iseries_handle_interrupts(void); #define raw_irqs_disabled() (local_get_flags() == 0) #define raw_irqs_disabled_flags(flags) ((flags) == 0) +#ifdef CONFIG_PPC_BOOK3E +#define __hard_irq_enable() __asm__ __volatile__("wrteei 1": : :"memory"); +#define __hard_irq_disable() __asm__ __volatile__("wrteei 0": : :"memory"); +#else #define __hard_irq_enable() __mtmsrd(mfmsr() | MSR_EE, 1) #define __hard_irq_disable() __mtmsrd(mfmsr() & ~MSR_EE, 1) +#endif #define hard_irq_disable() \ do { \ diff --git a/arch/powerpc/include/asm/smp.h b/arch/powerpc/include/asm/smp.h index e782f43ee66..c0d3b8af931 100644 --- a/arch/powerpc/include/asm/smp.h +++ b/arch/powerpc/include/asm/smp.h @@ -153,6 +153,7 @@ extern void arch_send_call_function_ipi(cpumask_t mask); * 64-bit but defining them all here doesn't harm */ extern void generic_secondary_smp_init(void); +extern void generic_secondary_thread_init(void); extern unsigned long __secondary_hold_spinloop; extern unsigned long __secondary_hold_acknowledge; extern char __secondary_hold; diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile index b73396b9390..035946f9d5f 100644 --- a/arch/powerpc/kernel/Makefile +++ b/arch/powerpc/kernel/Makefile @@ -33,10 +33,10 @@ obj-y := cputable.o ptrace.o syscalls.o \ obj-y += vdso32/ obj-$(CONFIG_PPC64) += setup_64.o sys_ppc32.o \ signal_64.o ptrace32.o \ - paca.o cpu_setup_ppc970.o \ - cpu_setup_pa6t.o \ - firmware.o nvram_64.o + paca.o nvram_64.o firmware.o +obj-$(CONFIG_PPC_BOOK3S_64) += cpu_setup_ppc970.o cpu_setup_pa6t.o obj64-$(CONFIG_RELOCATABLE) += reloc_64.o +obj-$(CONFIG_PPC_BOOK3E_64) += exceptions-64e.o obj-$(CONFIG_PPC64) += vdso64/ obj-$(CONFIG_ALTIVEC) += vecemu.o obj-$(CONFIG_PPC_970_NAP) += idle_power4.o @@ -63,8 +63,8 @@ obj-$(CONFIG_MODULES) += module.o module_$(CONFIG_WORD_SIZE).o obj-$(CONFIG_44x) += cpu_setup_44x.o obj-$(CONFIG_FSL_BOOKE) += cpu_setup_fsl_booke.o dbell.o -extra-$(CONFIG_PPC_STD_MMU) := head_32.o -extra-$(CONFIG_PPC64) := head_64.o +extra-y := head_$(CONFIG_WORD_SIZE).o +extra-$(CONFIG_PPC_BOOK3E_32) := head_new_booke.o extra-$(CONFIG_40x) := head_40x.o extra-$(CONFIG_44x) := head_44x.o extra-$(CONFIG_FSL_BOOKE) := head_fsl_booke.o diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c index 4a24a2fc457..f34ea37079b 100644 --- a/arch/powerpc/kernel/cputable.c +++ b/arch/powerpc/kernel/cputable.c @@ -93,7 +93,7 @@ extern void __restore_cpu_power7(void); PPC_FEATURE_BOOKE) static struct cpu_spec __initdata cpu_specs[] = { -#ifdef CONFIG_PPC64 +#ifdef CONFIG_PPC_BOOK3S_64 { /* Power3 */ .pvr_mask = 0xffff0000, .pvr_value = 0x00400000, @@ -508,7 +508,30 @@ static struct cpu_spec __initdata cpu_specs[] = { .machine_check = machine_check_generic, .platform = "power4", } -#endif /* CONFIG_PPC64 */ +#endif /* CONFIG_PPC_BOOK3S_64 */ +#ifdef CONFIG_PPC_BOOK3E_64 + { /* This is a default entry to get going, to be replaced by + * a real one at some stage + */ +#define CPU_FTRS_BASE_BOOK3E (CPU_FTR_USE_TB | \ + CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_SMT | \ + CPU_FTR_NODSISRALIGN | CPU_FTR_NOEXECUTE) + .pvr_mask = 0x00000000, + .pvr_value = 0x00000000, + .cpu_name = "Book3E", + .cpu_features = CPU_FTRS_BASE_BOOK3E, + .cpu_user_features = COMMON_USER_PPC64, + .mmu_features = MMU_FTR_TYPE_3E | MMU_FTR_USE_TLBILX | + MMU_FTR_USE_TLBIVAX_BCAST | + MMU_FTR_LOCK_BCAST_INVAL, + .icache_bsize = 64, + .dcache_bsize = 64, + .num_pmcs = 0, + .machine_check = machine_check_generic, + .platform = "power6", + }, +#endif + #ifdef CONFIG_PPC32 #if CLASSIC_PPC { /* 601 */ diff --git a/arch/powerpc/kernel/entry_64.S b/arch/powerpc/kernel/entry_64.S index 1cb0f3d1714..66bcda34a6b 100644 --- a/arch/powerpc/kernel/entry_64.S +++ b/arch/powerpc/kernel/entry_64.S @@ -120,9 +120,15 @@ BEGIN_FW_FTR_SECTION 2: END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES) #endif /* CONFIG_PPC_ISERIES */ + + /* Hard enable interrupts */ +#ifdef CONFIG_PPC_BOOK3E + wrteei 1 +#else mfmsr r11 ori r11,r11,MSR_EE mtmsrd r11,1 +#endif /* CONFIG_PPC_BOOK3E */ #ifdef SHOW_SYSCALLS bl .do_show_syscall @@ -168,15 +174,25 @@ syscall_exit: #endif clrrdi r12,r1,THREAD_SHIFT - /* disable interrupts so current_thread_info()->flags can't change, - and so that we don't get interrupted after loading SRR0/1. */ ld r8,_MSR(r1) +#ifdef CONFIG_PPC_BOOK3S + /* No MSR:RI on BookE */ andi. r10,r8,MSR_RI beq- unrecov_restore +#endif + + /* Disable interrupts so current_thread_info()->flags can't change, + * and so that we don't get interrupted after loading SRR0/1. + */ +#ifdef CONFIG_PPC_BOOK3E + wrteei 0 +#else mfmsr r10 rldicl r10,r10,48,1 rotldi r10,r10,16 mtmsrd r10,1 +#endif /* CONFIG_PPC_BOOK3E */ + ld r9,TI_FLAGS(r12) li r11,-_LAST_ERRNO andi. r0,r9,(_TIF_SYSCALL_T_OR_A|_TIF_SINGLESTEP|_TIF_USER_WORK_MASK|_TIF_PERSYSCALL_MASK) @@ -194,9 +210,13 @@ syscall_error_cont: * userspace and we take an exception after restoring r13, * we end up corrupting the userspace r13 value. */ +#ifdef CONFIG_PPC_BOOK3S + /* No MSR:RI on BookE */ li r12,MSR_RI andc r11,r10,r12 mtmsrd r11,1 /* clear MSR.RI */ +#endif /* CONFIG_PPC_BOOK3S */ + beq- 1f ACCOUNT_CPU_USER_EXIT(r11, r12) ld r13,GPR13(r1) /* only restore r13 if returning to usermode */ @@ -206,7 +226,7 @@ syscall_error_cont: mtcr r5 mtspr SPRN_SRR0,r7 mtspr SPRN_SRR1,r8 - rfid + RFI b . /* prevent speculative execution */ syscall_error: @@ -276,9 +296,13 @@ syscall_exit_work: beq .ret_from_except_lite /* Re-enable interrupts */ +#ifdef CONFIG_PPC_BOOK3E + wrteei 1 +#else mfmsr r10 ori r10,r10,MSR_EE mtmsrd r10,1 +#endif /* CONFIG_PPC_BOOK3E */ bl .save_nvgprs addi r3,r1,STACK_FRAME_OVERHEAD @@ -380,7 +404,7 @@ END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC) and. r0,r0,r22 beq+ 1f andc r22,r22,r0 - mtmsrd r22 + MTMSRD(r22) isync 1: std r20,_NIP(r1) mfcr r23 @@ -399,6 +423,7 @@ END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC) std r6,PACACURRENT(r13) /* Set new 'current' */ ld r8,KSP(r4) /* new stack pointer */ +#ifdef CONFIG_PPC_BOOK3S BEGIN_FTR_SECTION BEGIN_FTR_SECTION_NESTED(95) clrrdi r6,r8,28 /* get its ESID */ @@ -445,8 +470,9 @@ END_FTR_SECTION_IFSET(CPU_FTR_1T_SEGMENT) slbie r6 /* Workaround POWER5 < DD2.1 issue */ slbmte r7,r0 isync - 2: +#endif /* !CONFIG_PPC_BOOK3S */ + clrrdi r7,r8,THREAD_SHIFT /* base of new stack */ /* Note: this uses SWITCH_FRAME_SIZE rather than INT_FRAME_SIZE because we don't need to leave the 288-byte ABI gap at the @@ -490,10 +516,14 @@ _GLOBAL(ret_from_except_lite) * can't change between when we test it and when we return * from the interrupt. */ +#ifdef CONFIG_PPC_BOOK3E + wrteei 0 +#else mfmsr r10 /* Get current interrupt state */ rldicl r9,r10,48,1 /* clear MSR_EE */ rotldi r9,r9,16 mtmsrd r9,1 /* Update machine state */ +#endif /* CONFIG_PPC_BOOK3E */ #ifdef CONFIG_PREEMPT clrrdi r9,r1,THREAD_SHIFT /* current_thread_info() */ @@ -540,6 +570,9 @@ ALT_FW_FTR_SECTION_END_IFCLR(FW_FEATURE_ISERIES) rldicl r4,r3,49,63 /* r0 = (r3 >> 15) & 1 */ stb r4,PACAHARDIRQEN(r13) +#ifdef CONFIG_PPC_BOOK3E + b .exception_return_book3e +#else ld r4,_CTR(r1) ld r0,_LINK(r1) mtctr r4 @@ -588,6 +621,8 @@ ALT_FW_FTR_SECTION_END_IFCLR(FW_FEATURE_ISERIES) rfid b . /* prevent speculative execution */ +#endif /* CONFIG_PPC_BOOK3E */ + iseries_check_pending_irqs: #ifdef CONFIG_PPC_ISERIES ld r5,SOFTE(r1) @@ -638,6 +673,11 @@ do_work: li r0,1 stb r0,PACASOFTIRQEN(r13) stb r0,PACAHARDIRQEN(r13) +#ifdef CONFIG_PPC_BOOK3E + wrteei 1 + bl .preempt_schedule + wrteei 0 +#else ori r10,r10,MSR_EE mtmsrd r10,1 /* reenable interrupts */ bl .preempt_schedule @@ -646,6 +686,7 @@ do_work: rldicl r10,r10,48,1 /* disable interrupts again */ rotldi r10,r10,16 mtmsrd r10,1 +#endif /* CONFIG_PPC_BOOK3E */ ld r4,TI_FLAGS(r9) andi. r0,r4,_TIF_NEED_RESCHED bne 1b @@ -654,8 +695,12 @@ do_work: user_work: #endif /* Enable interrupts */ +#ifdef CONFIG_PPC_BOOK3E + wrteei 1 +#else ori r10,r10,MSR_EE mtmsrd r10,1 +#endif /* CONFIG_PPC_BOOK3E */ andi. r0,r4,_TIF_NEED_RESCHED beq 1f @@ -837,6 +882,10 @@ _GLOBAL(enter_prom) /* Switch MSR to 32 bits mode */ +#ifdef CONFIG_PPC_BOOK3E + rlwinm r11,r11,0,1,31 + mtmsr r11 +#else /* CONFIG_PPC_BOOK3E */ mfmsr r11 li r12,1 rldicr r12,r12,MSR_SF_LG,(63-MSR_SF_LG) @@ -845,6 +894,7 @@ _GLOBAL(enter_prom) rldicr r12,r12,MSR_ISF_LG,(63-MSR_ISF_LG) andc r11,r11,r12 mtmsrd r11 +#endif /* CONFIG_PPC_BOOK3E */ isync /* Enter PROM here... */ diff --git a/arch/powerpc/kernel/exceptions-64e.S b/arch/powerpc/kernel/exceptions-64e.S new file mode 100644 index 00000000000..695d4847d22 --- /dev/null +++ b/arch/powerpc/kernel/exceptions-64e.S @@ -0,0 +1,784 @@ +/* + * Boot code and exception vectors for Book3E processors + * + * Copyright (C) 2007 Ben. Herrenschmidt (benh@kernel.crashing.org), IBM Corp. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* XXX This will ultimately add space for a special exception save + * structure used to save things like SRR0/SRR1, SPRGs, MAS, etc... + * when taking special interrupts. For now we don't support that, + * special interrupts from within a non-standard level will probably + * blow you up + */ +#define SPECIAL_EXC_FRAME_SIZE INT_FRAME_SIZE + +/* Exception prolog code for all exceptions */ +#define EXCEPTION_PROLOG(n, type, addition) \ + mtspr SPRN_SPRG_##type##_SCRATCH,r13; /* get spare registers */ \ + mfspr r13,SPRN_SPRG_PACA; /* get PACA */ \ + std r10,PACA_EX##type+EX_R10(r13); \ + std r11,PACA_EX##type+EX_R11(r13); \ + mfcr r10; /* save CR */ \ + addition; /* additional code for that exc. */ \ + std r1,PACA_EX##type+EX_R1(r13); /* save old r1 in the PACA */ \ + stw r10,PACA_EX##type+EX_CR(r13); /* save old CR in the PACA */ \ + mfspr r11,SPRN_##type##_SRR1;/* what are we coming from */ \ + type##_SET_KSTACK; /* get special stack if necessary */\ + andi. r10,r11,MSR_PR; /* save stack pointer */ \ + beq 1f; /* branch around if supervisor */ \ + ld r1,PACAKSAVE(r13); /* get kernel stack coming from usr */\ +1: cmpdi cr1,r1,0; /* check if SP makes sense */ \ + bge- cr1,exc_##n##_bad_stack;/* bad stack (TODO: out of line) */ \ + mfspr r10,SPRN_##type##_SRR0; /* read SRR0 before touching stack */ + +/* Exception type-specific macros */ +#define GEN_SET_KSTACK \ + subi r1,r1,INT_FRAME_SIZE; /* alloc frame on kernel stack */ +#define SPRN_GEN_SRR0 SPRN_SRR0 +#define SPRN_GEN_SRR1 SPRN_SRR1 + +#define CRIT_SET_KSTACK \ + ld r1,PACA_CRIT_STACK(r13); \ + subi r1,r1,SPECIAL_EXC_FRAME_SIZE; +#define SPRN_CRIT_SRR0 SPRN_CSRR0 +#define SPRN_CRIT_SRR1 SPRN_CSRR1 + +#define DBG_SET_KSTACK \ + ld r1,PACA_DBG_STACK(r13); \ + subi r1,r1,SPECIAL_EXC_FRAME_SIZE; +#define SPRN_DBG_SRR0 SPRN_DSRR0 +#define SPRN_DBG_SRR1 SPRN_DSRR1 + +#define MC_SET_KSTACK \ + ld r1,PACA_MC_STACK(r13); \ + subi r1,r1,SPECIAL_EXC_FRAME_SIZE; +#define SPRN_MC_SRR0 SPRN_MCSRR0 +#define SPRN_MC_SRR1 SPRN_MCSRR1 + +#define NORMAL_EXCEPTION_PROLOG(n, addition) \ + EXCEPTION_PROLOG(n, GEN, addition##_GEN) + +#define CRIT_EXCEPTION_PROLOG(n, addition) \ + EXCEPTION_PROLOG(n, CRIT, addition##_CRIT) + +#define DBG_EXCEPTION_PROLOG(n, addition) \ + EXCEPTION_PROLOG(n, DBG, addition##_DBG) + +#define MC_EXCEPTION_PROLOG(n, addition) \ + EXCEPTION_PROLOG(n, MC, addition##_MC) + + +/* Variants of the "addition" argument for the prolog + */ +#define PROLOG_ADDITION_NONE_GEN +#define PROLOG_ADDITION_NONE_CRIT +#define PROLOG_ADDITION_NONE_DBG +#define PROLOG_ADDITION_NONE_MC + +#define PROLOG_ADDITION_MASKABLE_GEN \ + lbz r11,PACASOFTIRQEN(r13); /* are irqs soft-disabled ? */ \ + cmpwi cr0,r11,0; /* yes -> go out of line */ \ + beq masked_interrupt_book3e; + +#define PROLOG_ADDITION_2REGS_GEN \ + std r14,PACA_EXGEN+EX_R14(r13); \ + std r15,PACA_EXGEN+EX_R15(r13) + +#define PROLOG_ADDITION_1REG_GEN \ + std r14,PACA_EXGEN+EX_R14(r13); + +#define PROLOG_ADDITION_2REGS_CRIT \ + std r14,PACA_EXCRIT+EX_R14(r13); \ + std r15,PACA_EXCRIT+EX_R15(r13) + +#define PROLOG_ADDITION_2REGS_DBG \ + std r14,PACA_EXDBG+EX_R14(r13); \ + std r15,PACA_EXDBG+EX_R15(r13) + +#define PROLOG_ADDITION_2REGS_MC \ + std r14,PACA_EXMC+EX_R14(r13); \ + std r15,PACA_EXMC+EX_R15(r13) + +/* Core exception code for all exceptions except TLB misses. + * XXX: Needs to make SPRN_SPRG_GEN depend on exception type + */ +#define EXCEPTION_COMMON(n, excf, ints) \ + std r0,GPR0(r1); /* save r0 in stackframe */ \ + std r2,GPR2(r1); /* save r2 in stackframe */ \ + SAVE_4GPRS(3, r1); /* save r3 - r6 in stackframe */ \ + SAVE_2GPRS(7, r1); /* save r7, r8 in stackframe */ \ + std r9,GPR9(r1); /* save r9 in stackframe */ \ + std r10,_NIP(r1); /* save SRR0 to stackframe */ \ + std r11,_MSR(r1); /* save SRR1 to stackframe */ \ + ACCOUNT_CPU_USER_ENTRY(r10,r11);/* accounting (uses cr0+eq) */ \ + ld r3,excf+EX_R10(r13); /* get back r10 */ \ + ld r4,excf+EX_R11(r13); /* get back r11 */ \ + mfspr r5,SPRN_SPRG_GEN_SCRATCH;/* get back r13 */ \ + std r12,GPR12(r1); /* save r12 in stackframe */ \ + ld r2,PACATOC(r13); /* get kernel TOC into r2 */ \ + mflr r6; /* save LR in stackframe */ \ + mfctr r7; /* save CTR in stackframe */ \ + mfspr r8,SPRN_XER; /* save XER in stackframe */ \ + ld r9,excf+EX_R1(r13); /* load orig r1 back from PACA */ \ + lwz r10,excf+EX_CR(r13); /* load orig CR back from PACA */ \ + lbz r11,PACASOFTIRQEN(r13); /* get current IRQ softe */ \ + ld r12,exception_marker@toc(r2); \ + li r0,0; \ + std r3,GPR10(r1); /* save r10 to stackframe */ \ + std r4,GPR11(r1); /* save r11 to stackframe */ \ + std r5,GPR13(r1); /* save it to stackframe */ \ + std r6,_LINK(r1); \ + std r7,_CTR(r1); \ + std r8,_XER(r1); \ + li r3,(n)+1; /* indicate partial regs in trap */ \ + std r9,0(r1); /* store stack frame back link */ \ + std r10,_CCR(r1); /* store orig CR in stackframe */ \ + std r9,GPR1(r1); /* store stack frame back link */ \ + std r11,SOFTE(r1); /* and save it to stackframe */ \ + std r12,STACK_FRAME_OVERHEAD-16(r1); /* mark the frame */ \ + std r3,_TRAP(r1); /* set trap number */ \ + std r0,RESULT(r1); /* clear regs->result */ \ + ints; + +/* Variants for the "ints" argument */ +#define INTS_KEEP +#define INTS_DISABLE_SOFT \ + stb r0,PACASOFTIRQEN(r13); /* mark interrupts soft-disabled */ \ + TRACE_DISABLE_INTS; +#define INTS_DISABLE_HARD \ + stb r0,PACAHARDIRQEN(r13); /* and hard disabled */ +#define INTS_DISABLE_ALL \ + INTS_DISABLE_SOFT \ + INTS_DISABLE_HARD + +/* This is called by exceptions that used INTS_KEEP (that is did not clear + * neither soft nor hard IRQ indicators in the PACA. This will restore MSR:EE + * to it's previous value + * + * XXX In the long run, we may want to open-code it in order to separate the + * load from the wrtee, thus limiting the latency caused by the dependency + * but at this point, I'll favor code clarity until we have a near to final + * implementation + */ +#define INTS_RESTORE_HARD \ + ld r11,_MSR(r1); \ + wrtee r11; + +/* XXX FIXME: Restore r14/r15 when necessary */ +#define BAD_STACK_TRAMPOLINE(n) \ +exc_##n##_bad_stack: \ + li r1,(n); /* get exception number */ \ + sth r1,PACA_TRAP_SAVE(r13); /* store trap */ \ + b bad_stack_book3e; /* bad stack error */ + +#define EXCEPTION_STUB(loc, label) \ + . = interrupt_base_book3e + loc; \ + nop; /* To make debug interrupts happy */ \ + b exc_##label##_book3e; + +#define ACK_NONE(r) +#define ACK_DEC(r) \ + lis r,TSR_DIS@h; \ + mtspr SPRN_TSR,r +#define ACK_FIT(r) \ + lis r,TSR_FIS@h; \ + mtspr SPRN_TSR,r + +#define MASKABLE_EXCEPTION(trapnum, label, hdlr, ack) \ + START_EXCEPTION(label); \ + NORMAL_EXCEPTION_PROLOG(trapnum, PROLOG_ADDITION_MASKABLE) \ + EXCEPTION_COMMON(trapnum, PACA_EXGEN, INTS_DISABLE_ALL) \ + ack(r8); \ + addi r3,r1,STACK_FRAME_OVERHEAD; \ + bl hdlr; \ + b .ret_from_except_lite; + +/* This value is used to mark exception frames on the stack. */ + .section ".toc","aw" +exception_marker: + .tc ID_EXC_MARKER[TC],STACK_FRAME_REGS_MARKER + + +/* + * And here we have the exception vectors ! + */ + + .text + .balign 0x1000 + .globl interrupt_base_book3e +interrupt_base_book3e: /* fake trap */ + /* Note: If real debug exceptions are supported by the HW, the vector + * below will have to be patched up to point to an appropriate handler + */ + EXCEPTION_STUB(0x000, machine_check) /* 0x0200 */ + EXCEPTION_STUB(0x020, critical_input) /* 0x0580 */ + EXCEPTION_STUB(0x040, debug_crit) /* 0x0d00 */ + EXCEPTION_STUB(0x060, data_storage) /* 0x0300 */ + EXCEPTION_STUB(0x080, instruction_storage) /* 0x0400 */ + EXCEPTION_STUB(0x0a0, external_input) /* 0x0500 */ + EXCEPTION_STUB(0x0c0, alignment) /* 0x0600 */ + EXCEPTION_STUB(0x0e0, program) /* 0x0700 */ + EXCEPTION_STUB(0x100, fp_unavailable) /* 0x0800 */ + EXCEPTION_STUB(0x120, system_call) /* 0x0c00 */ + EXCEPTION_STUB(0x140, ap_unavailable) /* 0x0f20 */ + EXCEPTION_STUB(0x160, decrementer) /* 0x0900 */ + EXCEPTION_STUB(0x180, fixed_interval) /* 0x0980 */ + EXCEPTION_STUB(0x1a0, watchdog) /* 0x09f0 */ + EXCEPTION_STUB(0x1c0, data_tlb_miss) + EXCEPTION_STUB(0x1e0, instruction_tlb_miss) + +#if 0 + EXCEPTION_STUB(0x280, processor_doorbell) + EXCEPTION_STUB(0x220, processor_doorbell_crit) +#endif + .globl interrupt_end_book3e +interrupt_end_book3e: + +/* Critical Input Interrupt */ + START_EXCEPTION(critical_input); + CRIT_EXCEPTION_PROLOG(0x100, PROLOG_ADDITION_NONE) +// EXCEPTION_COMMON(0x100, PACA_EXCRIT, INTS_DISABLE_ALL) +// bl special_reg_save_crit +// addi r3,r1,STACK_FRAME_OVERHEAD +// bl .critical_exception +// b ret_from_crit_except + b . + +/* Machine Check Interrupt */ + START_EXCEPTION(machine_check); + CRIT_EXCEPTION_PROLOG(0x200, PROLOG_ADDITION_NONE) +// EXCEPTION_COMMON(0x200, PACA_EXMC, INTS_DISABLE_ALL) +// bl special_reg_save_mc +// addi r3,r1,STACK_FRAME_OVERHEAD +// bl .machine_check_exception +// b ret_from_mc_except + b . + +/* Data Storage Interrupt */ + START_EXCEPTION(data_storage) + NORMAL_EXCEPTION_PROLOG(0x300, PROLOG_ADDITION_2REGS) + mfspr r14,SPRN_DEAR + mfspr r15,SPRN_ESR + EXCEPTION_COMMON(0x300, PACA_EXGEN, INTS_KEEP) + b storage_fault_common + +/* Instruction Storage Interrupt */ + START_EXCEPTION(instruction_storage); + NORMAL_EXCEPTION_PROLOG(0x400, PROLOG_ADDITION_2REGS) + li r15,0 + mr r14,r10 + EXCEPTION_COMMON(0x400, PACA_EXGEN, INTS_KEEP) + b storage_fault_common + +/* External Input Interrupt */ + MASKABLE_EXCEPTION(0x500, external_input, .do_IRQ, ACK_NONE) + +/* Alignment */ + START_EXCEPTION(alignment); + NORMAL_EXCEPTION_PROLOG(0x600, PROLOG_ADDITION_2REGS) + mfspr r14,SPRN_DEAR + mfspr r15,SPRN_ESR + EXCEPTION_COMMON(0x600, PACA_EXGEN, INTS_KEEP) + b alignment_more /* no room, go out of line */ + +/* Program Interrupt */ + START_EXCEPTION(program); + NORMAL_EXCEPTION_PROLOG(0x700, PROLOG_ADDITION_1REG) + mfspr r14,SPRN_ESR + EXCEPTION_COMMON(0x700, PACA_EXGEN, INTS_DISABLE_SOFT) + std r14,_DSISR(r1) + addi r3,r1,STACK_FRAME_OVERHEAD + ld r14,PACA_EXGEN+EX_R14(r13) + bl .save_nvgprs + INTS_RESTORE_HARD + bl .program_check_exception + b .ret_from_except + +/* Floating Point Unavailable Interrupt */ + START_EXCEPTION(fp_unavailable); + NORMAL_EXCEPTION_PROLOG(0x800, PROLOG_ADDITION_NONE) + /* we can probably do a shorter exception entry for that one... */ + EXCEPTION_COMMON(0x800, PACA_EXGEN, INTS_KEEP) + bne 1f /* if from user, just load it up */ + bl .save_nvgprs + addi r3,r1,STACK_FRAME_OVERHEAD + INTS_RESTORE_HARD + bl .kernel_fp_unavailable_exception + BUG_OPCODE +1: ld r12,_MSR(r1) + bl .load_up_fpu + b fast_exception_return + +/* Decrementer Interrupt */ + MASKABLE_EXCEPTION(0x900, decrementer, .timer_interrupt, ACK_DEC) + +/* Fixed Interval Timer Interrupt */ + MASKABLE_EXCEPTION(0x980, fixed_interval, .unknown_exception, ACK_FIT) + +/* Watchdog Timer Interrupt */ + START_EXCEPTION(watchdog); + CRIT_EXCEPTION_PROLOG(0x9f0, PROLOG_ADDITION_NONE) +// EXCEPTION_COMMON(0x9f0, PACA_EXCRIT, INTS_DISABLE_ALL) +// bl special_reg_save_crit +// addi r3,r1,STACK_FRAME_OVERHEAD +// bl .unknown_exception +// b ret_from_crit_except + b . + +/* System Call Interrupt */ + START_EXCEPTION(system_call) + mr r9,r13 /* keep a copy of userland r13 */ + mfspr r11,SPRN_SRR0 /* get return address */ + mfspr r12,SPRN_SRR1 /* get previous MSR */ + mfspr r13,SPRN_SPRG_PACA /* get our PACA */ + b system_call_common + +/* Auxillary Processor Unavailable Interrupt */ + START_EXCEPTION(ap_unavailable); + NORMAL_EXCEPTION_PROLOG(0xf20, PROLOG_ADDITION_NONE) + EXCEPTION_COMMON(0xf20, PACA_EXGEN, INTS_KEEP) + addi r3,r1,STACK_FRAME_OVERHEAD + bl .save_nvgprs + INTS_RESTORE_HARD + bl .unknown_exception + b .ret_from_except + +/* Debug exception as a critical interrupt*/ + START_EXCEPTION(debug_crit); + CRIT_EXCEPTION_PROLOG(0xd00, PROLOG_ADDITION_2REGS) + + /* + * If there is a single step or branch-taken exception in an + * exception entry sequence, it was probably meant to apply to + * the code where the exception occurred (since exception entry + * doesn't turn off DE automatically). We simulate the effect + * of turning off DE on entry to an exception handler by turning + * off DE in the CSRR1 value and clearing the debug status. + */ + + mfspr r14,SPRN_DBSR /* check single-step/branch taken */ + andis. r15,r14,DBSR_IC@h + beq+ 1f + + LOAD_REG_IMMEDIATE(r14,interrupt_base_book3e) + LOAD_REG_IMMEDIATE(r15,interrupt_end_book3e) + cmpld cr0,r10,r14 + cmpld cr1,r10,r15 + blt+ cr0,1f + bge+ cr1,1f + + /* here it looks like we got an inappropriate debug exception. */ + lis r14,DBSR_IC@h /* clear the IC event */ + rlwinm r11,r11,0,~MSR_DE /* clear DE in the CSRR1 value */ + mtspr SPRN_DBSR,r14 + mtspr SPRN_CSRR1,r11 + lwz r10,PACA_EXCRIT+EX_CR(r13) /* restore registers */ + ld r1,PACA_EXCRIT+EX_R1(r13) + ld r14,PACA_EXCRIT+EX_R14(r13) + ld r15,PACA_EXCRIT+EX_R15(r13) + mtcr r10 + ld r10,PACA_EXCRIT+EX_R10(r13) /* restore registers */ + ld r11,PACA_EXCRIT+EX_R11(r13) + mfspr r13,SPRN_SPRG_CRIT_SCRATCH + rfci + + /* Normal debug exception */ + /* XXX We only handle coming from userspace for now since we can't + * quite save properly an interrupted kernel state yet + */ +1: andi. r14,r11,MSR_PR; /* check for userspace again */ + beq kernel_dbg_exc; /* if from kernel mode */ + + /* Now we mash up things to make it look like we are coming on a + * normal exception + */ + mfspr r15,SPRN_SPRG_CRIT_SCRATCH + mtspr SPRN_SPRG_GEN_SCRATCH,r15 + mfspr r14,SPRN_DBSR + EXCEPTION_COMMON(0xd00, PACA_EXCRIT, INTS_DISABLE_ALL) + std r14,_DSISR(r1) + addi r3,r1,STACK_FRAME_OVERHEAD + mr r4,r14 + ld r14,PACA_EXCRIT+EX_R14(r13) + ld r15,PACA_EXCRIT+EX_R15(r13) + bl .save_nvgprs + bl .DebugException + b .ret_from_except + +kernel_dbg_exc: + b . /* NYI */ + + +/* + * An interrupt came in while soft-disabled; clear EE in SRR1, + * clear paca->hard_enabled and return. + */ +masked_interrupt_book3e: + mtcr r10 + stb r11,PACAHARDIRQEN(r13) + mfspr r10,SPRN_SRR1 + rldicl r11,r10,48,1 /* clear MSR_EE */ + rotldi r10,r11,16 + mtspr SPRN_SRR1,r10 + ld r10,PACA_EXGEN+EX_R10(r13); /* restore registers */ + ld r11,PACA_EXGEN+EX_R11(r13); + mfspr r13,SPRN_SPRG_GEN_SCRATCH; + rfi + b . + +/* + * This is called from 0x300 and 0x400 handlers after the prologs with + * r14 and r15 containing the fault address and error code, with the + * original values stashed away in the PACA + */ +storage_fault_common: + std r14,_DAR(r1) + std r15,_DSISR(r1) + addi r3,r1,STACK_FRAME_OVERHEAD + mr r4,r14 + mr r5,r15 + ld r14,PACA_EXGEN+EX_R14(r13) + ld r15,PACA_EXGEN+EX_R15(r13) + INTS_RESTORE_HARD + bl .do_page_fault + cmpdi r3,0 + bne- 1f + b .ret_from_except_lite +1: bl .save_nvgprs + mr r5,r3 + addi r3,r1,STACK_FRAME_OVERHEAD + ld r4,_DAR(r1) + bl .bad_page_fault + b .ret_from_except + +/* + * Alignment exception doesn't fit entirely in the 0x100 bytes so it + * continues here. + */ +alignment_more: + std r14,_DAR(r1) + std r15,_DSISR(r1) + addi r3,r1,STACK_FRAME_OVERHEAD + ld r14,PACA_EXGEN+EX_R14(r13) + ld r15,PACA_EXGEN+EX_R15(r13) + bl .save_nvgprs + INTS_RESTORE_HARD + bl .alignment_exception + b .ret_from_except + +/* + * We branch here from entry_64.S for the last stage of the exception + * return code path. MSR:EE is expected to be off at that point + */ +_GLOBAL(exception_return_book3e) + b 1f + +/* This is the return from load_up_fpu fast path which could do with + * less GPR restores in fact, but for now we have a single return path + */ + .globl fast_exception_return +fast_exception_return: + wrteei 0 +1: mr r0,r13 + ld r10,_MSR(r1) + REST_4GPRS(2, r1) + andi. r6,r10,MSR_PR + REST_2GPRS(6, r1) + beq 1f + ACCOUNT_CPU_USER_EXIT(r10, r11) + ld r0,GPR13(r1) + +1: stdcx. r0,0,r1 /* to clear the reservation */ + + ld r8,_CCR(r1) + ld r9,_LINK(r1) + ld r10,_CTR(r1) + ld r11,_XER(r1) + mtcr r8 + mtlr r9 + mtctr r10 + mtxer r11 + REST_2GPRS(8, r1) + ld r10,GPR10(r1) + ld r11,GPR11(r1) + ld r12,GPR12(r1) + mtspr SPRN_SPRG_GEN_SCRATCH,r0 + + std r10,PACA_EXGEN+EX_R10(r13); + std r11,PACA_EXGEN+EX_R11(r13); + ld r10,_NIP(r1) + ld r11,_MSR(r1) + ld r0,GPR0(r1) + ld r1,GPR1(r1) + mtspr SPRN_SRR0,r10 + mtspr SPRN_SRR1,r11 + ld r10,PACA_EXGEN+EX_R10(r13) + ld r11,PACA_EXGEN+EX_R11(r13) + mfspr r13,SPRN_SPRG_GEN_SCRATCH + rfi + +/* + * Trampolines used when spotting a bad kernel stack pointer in + * the exception entry code. + * + * TODO: move some bits like SRR0 read to trampoline, pass PACA + * index around, etc... to handle crit & mcheck + */ +BAD_STACK_TRAMPOLINE(0x000) +BAD_STACK_TRAMPOLINE(0x100) +BAD_STACK_TRAMPOLINE(0x200) +BAD_STACK_TRAMPOLINE(0x300) +BAD_STACK_TRAMPOLINE(0x400) +BAD_STACK_TRAMPOLINE(0x500) +BAD_STACK_TRAMPOLINE(0x600) +BAD_STACK_TRAMPOLINE(0x700) +BAD_STACK_TRAMPOLINE(0x800) +BAD_STACK_TRAMPOLINE(0x900) +BAD_STACK_TRAMPOLINE(0x980) +BAD_STACK_TRAMPOLINE(0x9f0) +BAD_STACK_TRAMPOLINE(0xa00) +BAD_STACK_TRAMPOLINE(0xb00) +BAD_STACK_TRAMPOLINE(0xc00) +BAD_STACK_TRAMPOLINE(0xd00) +BAD_STACK_TRAMPOLINE(0xe00) +BAD_STACK_TRAMPOLINE(0xf00) +BAD_STACK_TRAMPOLINE(0xf20) + + .globl bad_stack_book3e +bad_stack_book3e: + /* XXX: Needs to make SPRN_SPRG_GEN depend on exception type */ + mfspr r10,SPRN_SRR0; /* read SRR0 before touching stack */ + ld r1,PACAEMERGSP(r13) + subi r1,r1,64+INT_FRAME_SIZE + std r10,_NIP(r1) + std r11,_MSR(r1) + ld r10,PACA_EXGEN+EX_R1(r13) /* FIXME for crit & mcheck */ + lwz r11,PACA_EXGEN+EX_CR(r13) /* FIXME for crit & mcheck */ + std r10,GPR1(r1) + std r11,_CCR(r1) + mfspr r10,SPRN_DEAR + mfspr r11,SPRN_ESR + std r10,_DAR(r1) + std r11,_DSISR(r1) + std r0,GPR0(r1); /* save r0 in stackframe */ \ + std r2,GPR2(r1); /* save r2 in stackframe */ \ + SAVE_4GPRS(3, r1); /* save r3 - r6 in stackframe */ \ + SAVE_2GPRS(7, r1); /* save r7, r8 in stackframe */ \ + std r9,GPR9(r1); /* save r9 in stackframe */ \ + ld r3,PACA_EXGEN+EX_R10(r13);/* get back r10 */ \ + ld r4,PACA_EXGEN+EX_R11(r13);/* get back r11 */ \ + mfspr r5,SPRN_SPRG_GEN_SCRATCH;/* get back r13 XXX can be wrong */ \ + std r3,GPR10(r1); /* save r10 to stackframe */ \ + std r4,GPR11(r1); /* save r11 to stackframe */ \ + std r12,GPR12(r1); /* save r12 in stackframe */ \ + std r5,GPR13(r1); /* save it to stackframe */ \ + mflr r10 + mfctr r11 + mfxer r12 + std r10,_LINK(r1) + std r11,_CTR(r1) + std r12,_XER(r1) + SAVE_10GPRS(14,r1) + SAVE_8GPRS(24,r1) + lhz r12,PACA_TRAP_SAVE(r13) + std r12,_TRAP(r1) + addi r11,r1,INT_FRAME_SIZE + std r11,0(r1) + li r12,0 + std r12,0(r11) + ld r2,PACATOC(r13) +1: addi r3,r1,STACK_FRAME_OVERHEAD + bl .kernel_bad_stack + b 1b + +/* + * Setup the initial TLB for a core. This current implementation + * assume that whatever we are running off will not conflict with + * the new mapping at PAGE_OFFSET. + * We also make various assumptions about the processor we run on, + * this might have to be made more flexible based on the content + * of MMUCFG and friends. + */ +_GLOBAL(initial_tlb_book3e) + + /* Setup MAS 0,1,2,3 and 7 for tlbwe of a 1G entry that maps the + * kernel linear mapping. We also set MAS8 once for all here though + * that will have to be made dependent on whether we are running under + * a hypervisor I suppose. + */ + li r3,MAS0_HES | MAS0_WQ_ALLWAYS + mtspr SPRN_MAS0,r3 + lis r3,(MAS1_VALID | MAS1_IPROT)@h + ori r3,r3,BOOK3E_PAGESZ_1GB << MAS1_TSIZE_SHIFT + mtspr SPRN_MAS1,r3 + LOAD_REG_IMMEDIATE(r3, PAGE_OFFSET | MAS2_M) + mtspr SPRN_MAS2,r3 + li r3,MAS3_SR | MAS3_SW | MAS3_SX + mtspr SPRN_MAS7_MAS3,r3 + li r3,0 + mtspr SPRN_MAS8,r3 + + /* Write the TLB entry */ + tlbwe + + /* Now we branch the new virtual address mapped by this entry */ + LOAD_REG_IMMEDIATE(r3,1f) + mtctr r3 + bctr + +1: /* We are now running at PAGE_OFFSET, clean the TLB of everything + * else (XXX we should scan for bolted crap from the firmware too) + */ + PPC_TLBILX(0,0,0) + sync + isync + + /* We translate LR and return */ + mflr r3 + tovirt(r3,r3) + mtlr r3 + blr + +/* + * Main entry (boot CPU, thread 0) + * + * We enter here from head_64.S, possibly after the prom_init trampoline + * with r3 and r4 already saved to r31 and 30 respectively and in 64 bits + * mode. Anything else is as it was left by the bootloader + * + * Initial requirements of this port: + * + * - Kernel loaded at 0 physical + * - A good lump of memory mapped 0:0 by UTLB entry 0 + * - MSR:IS & MSR:DS set to 0 + * + * Note that some of the above requirements will be relaxed in the future + * as the kernel becomes smarter at dealing with different initial conditions + * but for now you have to be careful + */ +_GLOBAL(start_initialization_book3e) + mflr r28 + + /* First, we need to setup some initial TLBs to map the kernel + * text, data and bss at PAGE_OFFSET. We don't have a real mode + * and always use AS 0, so we just set it up to match our link + * address and never use 0 based addresses. + */ + bl .initial_tlb_book3e + + /* Init global core bits */ + bl .init_core_book3e + + /* Init per-thread bits */ + bl .init_thread_book3e + + /* Return to common init code */ + tovirt(r28,r28) + mtlr r28 + blr + + +/* + * Secondary core/processor entry + * + * This is entered for thread 0 of a secondary core, all other threads + * are expected to be stopped. It's similar to start_initialization_book3e + * except that it's generally entered from the holding loop in head_64.S + * after CPUs have been gathered by Open Firmware. + * + * We assume we are in 32 bits mode running with whatever TLB entry was + * set for us by the firmware or POR engine. + */ +_GLOBAL(book3e_secondary_core_init_tlb_set) + li r4,1 + b .generic_secondary_smp_init + +_GLOBAL(book3e_secondary_core_init) + mflr r28 + + /* Do we need to setup initial TLB entry ? */ + cmplwi r4,0 + bne 2f + + /* Setup TLB for this core */ + bl .initial_tlb_book3e + + /* We can return from the above running at a different + * address, so recalculate r2 (TOC) + */ + bl .relative_toc + + /* Init global core bits */ +2: bl .init_core_book3e + + /* Init per-thread bits */ +3: bl .init_thread_book3e + + /* Return to common init code at proper virtual address. + * + * Due to various previous assumptions, we know we entered this + * function at either the final PAGE_OFFSET mapping or using a + * 1:1 mapping at 0, so we don't bother doing a complicated check + * here, we just ensure the return address has the right top bits. + * + * Note that if we ever want to be smarter about where we can be + * started from, we have to be careful that by the time we reach + * the code below we may already be running at a different location + * than the one we were called from since initial_tlb_book3e can + * have moved us already. + */ + cmpdi cr0,r28,0 + blt 1f + lis r3,PAGE_OFFSET@highest + sldi r3,r3,32 + or r28,r28,r3 +1: mtlr r28 + blr + +_GLOBAL(book3e_secondary_thread_init) + mflr r28 + b 3b + +_STATIC(init_core_book3e) + /* Establish the interrupt vector base */ + LOAD_REG_IMMEDIATE(r3, interrupt_base_book3e) + mtspr SPRN_IVPR,r3 + sync + blr + +_STATIC(init_thread_book3e) + lis r3,(SPRN_EPCR_ICM | SPRN_EPCR_GICM)@h + mtspr SPRN_EPCR,r3 + + /* Make sure interrupts are off */ + wrteei 0 + + /* disable watchdog and FIT and enable DEC interrupts */ + lis r3,TCR_DIE@h + mtspr SPRN_TCR,r3 + + blr + + + diff --git a/arch/powerpc/kernel/head_64.S b/arch/powerpc/kernel/head_64.S index 0552f01041a..c38afdb45d7 100644 --- a/arch/powerpc/kernel/head_64.S +++ b/arch/powerpc/kernel/head_64.S @@ -121,10 +121,11 @@ __run_at_load: */ .globl __secondary_hold __secondary_hold: +#ifndef CONFIG_PPC_BOOK3E mfmsr r24 ori r24,r24,MSR_RI mtmsrd r24 /* RI on */ - +#endif /* Grab our physical cpu number */ mr r24,r3 @@ -143,6 +144,7 @@ __secondary_hold: ld r4,0(r4) /* deref function descriptor */ mtctr r4 mr r3,r24 + li r4,0 bctr #else BUG_OPCODE @@ -163,21 +165,49 @@ exception_marker: #include "exceptions-64s.S" #endif +_GLOBAL(generic_secondary_thread_init) + mr r24,r3 + + /* turn on 64-bit mode */ + bl .enable_64b_mode + + /* get a valid TOC pointer, wherever we're mapped at */ + bl .relative_toc + +#ifdef CONFIG_PPC_BOOK3E + /* Book3E initialization */ + mr r3,r24 + bl .book3e_secondary_thread_init +#endif + b generic_secondary_common_init /* * On pSeries and most other platforms, secondary processors spin * in the following code. * At entry, r3 = this processor's number (physical cpu id) + * + * On Book3E, r4 = 1 to indicate that the initial TLB entry for + * this core already exists (setup via some other mechanism such + * as SCOM before entry). */ _GLOBAL(generic_secondary_smp_init) mr r24,r3 - + mr r25,r4 + /* turn on 64-bit mode */ bl .enable_64b_mode - /* get the TOC pointer (real address) */ + /* get a valid TOC pointer, wherever we're mapped at */ bl .relative_toc +#ifdef CONFIG_PPC_BOOK3E + /* Book3E initialization */ + mr r3,r24 + mr r4,r25 + bl .book3e_secondary_core_init +#endif + +generic_secondary_common_init: /* Set up a paca value for this processor. Since we have the * physical cpu id in r24, we need to search the pacas to find * which logical id maps to our physical one. @@ -196,6 +226,11 @@ _GLOBAL(generic_secondary_smp_init) b .kexec_wait /* next kernel might do better */ 2: mtspr SPRN_SPRG_PACA,r13 /* Save vaddr of paca in an SPRG */ +#ifdef CONFIG_PPC_BOOK3E + addi r12,r13,PACA_EXTLB /* and TLB exc frame in another */ + mtspr SPRN_SPRG_TLB_EXFRAME,r12 +#endif + /* From now on, r24 is expected to be logical cpuid */ mr r24,r5 3: HMT_LOW @@ -231,6 +266,7 @@ _GLOBAL(generic_secondary_smp_init) * Turn the MMU off. * Assumes we're mapped EA == RA if the MMU is on. */ +#ifdef CONFIG_PPC_BOOK3S _STATIC(__mmu_off) mfmsr r3 andi. r0,r3,MSR_IR|MSR_DR @@ -242,6 +278,7 @@ _STATIC(__mmu_off) sync rfid b . /* prevent speculative execution */ +#endif /* @@ -279,6 +316,10 @@ _GLOBAL(__start_initialization_multiplatform) mr r31,r3 mr r30,r4 +#ifdef CONFIG_PPC_BOOK3E + bl .start_initialization_book3e + b .__after_prom_start +#else /* Setup some critical 970 SPRs before switching MMU off */ mfspr r0,SPRN_PVR srwi r0,r0,16 @@ -296,6 +337,7 @@ _GLOBAL(__start_initialization_multiplatform) /* Switch off MMU if not already off */ bl .__mmu_off b .__after_prom_start +#endif /* CONFIG_PPC_BOOK3E */ _INIT_STATIC(__boot_from_prom) #ifdef CONFIG_PPC_OF_BOOT_TRAMPOLINE @@ -358,10 +400,16 @@ _STATIC(__after_prom_start) * Note: This process overwrites the OF exception vectors. */ li r3,0 /* target addr */ +#ifdef CONFIG_PPC_BOOK3E + tovirt(r3,r3) /* on booke, we already run at PAGE_OFFSET */ +#endif mr. r4,r26 /* In some cases the loader may */ beq 9f /* have already put us at zero */ li r6,0x100 /* Start offset, the first 0x100 */ /* bytes were copied earlier. */ +#ifdef CONFIG_PPC_BOOK3E + tovirt(r6,r6) /* on booke, we already run at PAGE_OFFSET */ +#endif #ifdef CONFIG_CRASH_DUMP /* @@ -507,6 +555,9 @@ _GLOBAL(pmac_secondary_start) * r13 = paca virtual address * SPRG_PACA = paca virtual address */ + .section ".text"; + .align 2 ; + .globl __secondary_start __secondary_start: /* Set thread priority to MEDIUM */ @@ -543,7 +594,7 @@ END_FW_FTR_SECTION_IFCLR(FW_FEATURE_ISERIES) mtspr SPRN_SRR0,r3 mtspr SPRN_SRR1,r4 - rfid + RFI b . /* prevent speculative execution */ /* @@ -564,11 +615,16 @@ _GLOBAL(start_secondary_prolog) */ _GLOBAL(enable_64b_mode) mfmsr r11 /* grab the current MSR */ +#ifdef CONFIG_PPC_BOOK3E + oris r11,r11,0x8000 /* CM bit set, we'll set ICM later */ + mtmsr r11 +#else /* CONFIG_PPC_BOOK3E */ li r12,(MSR_SF | MSR_ISF)@highest sldi r12,r12,48 or r11,r11,r12 mtmsrd r11 isync +#endif blr /* @@ -612,9 +668,11 @@ _INIT_STATIC(start_here_multiplatform) bdnz 3b 4: +#ifndef CONFIG_PPC_BOOK3E mfmsr r6 ori r6,r6,MSR_RI mtmsrd r6 /* RI on */ +#endif #ifdef CONFIG_RELOCATABLE /* Save the physical address we're running at in kernstart_addr */ @@ -647,7 +705,7 @@ _INIT_STATIC(start_here_multiplatform) ld r4,PACAKMSR(r13) mtspr SPRN_SRR0,r3 mtspr SPRN_SRR1,r4 - rfid + RFI b . /* prevent speculative execution */ /* This is where all platforms converge execution */ diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c index 65aced7b833..87df5172064 100644 --- a/arch/powerpc/kernel/setup_64.c +++ b/arch/powerpc/kernel/setup_64.c @@ -454,6 +454,24 @@ static void __init irqstack_early_init(void) #define irqstack_early_init() #endif +#ifdef CONFIG_PPC_BOOK3E +static void __init exc_lvl_early_init(void) +{ + unsigned int i; + + for_each_possible_cpu(i) { + critirq_ctx[i] = (struct thread_info *) + __va(lmb_alloc(THREAD_SIZE, THREAD_SIZE)); + dbgirq_ctx[i] = (struct thread_info *) + __va(lmb_alloc(THREAD_SIZE, THREAD_SIZE)); + mcheckirq_ctx[i] = (struct thread_info *) + __va(lmb_alloc(THREAD_SIZE, THREAD_SIZE)); + } +} +#else +#define exc_lvl_early_init() +#endif + /* * Stack space used when we detect a bad kernel stack pointer, and * early in SMP boots before relocation is enabled. @@ -513,6 +531,7 @@ void __init setup_arch(char **cmdline_p) init_mm.brk = klimit; irqstack_early_init(); + exc_lvl_early_init(); emergency_stack_init(); #ifdef CONFIG_PPC_STD_MMU_64 diff --git a/arch/powerpc/mm/Makefile b/arch/powerpc/mm/Makefile index 3e68363405b..6fb8fc8d2fe 100644 --- a/arch/powerpc/mm/Makefile +++ b/arch/powerpc/mm/Makefile @@ -13,6 +13,7 @@ obj-y := fault.o mem.o pgtable.o gup.o \ pgtable_$(CONFIG_WORD_SIZE).o obj-$(CONFIG_PPC_MMU_NOHASH) += mmu_context_nohash.o tlb_nohash.o \ tlb_nohash_low.o +obj-$(CONFIG_PPC_BOOK3E) += tlb_low_$(CONFIG_WORD_SIZE)e.o obj-$(CONFIG_PPC64) += mmap_64.o hash64-$(CONFIG_PPC_NATIVE) := hash_native_64.o obj-$(CONFIG_PPC_STD_MMU_64) += hash_utils_64.o \ diff --git a/arch/powerpc/platforms/Kconfig.cputype b/arch/powerpc/platforms/Kconfig.cputype index 61187bec750..9efc8bda01b 100644 --- a/arch/powerpc/platforms/Kconfig.cputype +++ b/arch/powerpc/platforms/Kconfig.cputype @@ -57,15 +57,35 @@ config E200 endchoice -config PPC_BOOK3S_64 - def_bool y +choice + prompt "Processor Type" depends on PPC64 + help + There are two families of 64 bit PowerPC chips supported. + The most common ones are the desktop and server CPUs + (POWER3, RS64, POWER4, POWER5, POWER5+, POWER6, ...) + + The other are the "embedded" processors compliant with the + "Book 3E" variant of the architecture + +config PPC_BOOK3S_64 + bool "Server processors" select PPC_FPU +config PPC_BOOK3E_64 + bool "Embedded processors" + select PPC_FPU # Make it a choice ? + +endchoice + config PPC_BOOK3S def_bool y depends on PPC_BOOK3S_32 || PPC_BOOK3S_64 +config PPC_BOOK3E + def_bool y + depends on PPC_BOOK3E_64 + config POWER4_ONLY bool "Optimize for POWER4" depends on PPC64 && PPC_BOOK3S @@ -125,7 +145,7 @@ config 4xx config BOOKE bool - depends on E200 || E500 || 44x + depends on E200 || E500 || 44x || PPC_BOOK3E default y config FSL_BOOKE @@ -223,9 +243,17 @@ config PPC_MMU_NOHASH def_bool y depends on !PPC_STD_MMU +config PPC_MMU_NOHASH_32 + def_bool y + depends on PPC_MMU_NOHASH && PPC32 + +config PPC_MMU_NOHASH_64 + def_bool y + depends on PPC_MMU_NOHASH && PPC64 + config PPC_BOOK3E_MMU def_bool y - depends on FSL_BOOKE + depends on FSL_BOOKE || PPC_BOOK3E config PPC_MM_SLICES bool @@ -257,7 +285,7 @@ config PPC_PERF_CTRS This enables the powerpc-specific perf_counter back-end. config SMP - depends on PPC_STD_MMU || FSL_BOOKE + depends on PPC_BOOK3S || PPC_BOOK3E || FSL_BOOKE bool "Symmetric multi-processing support" ---help--- This enables support for systems with more than one CPU. If you have diff --git a/arch/powerpc/xmon/xmon.c b/arch/powerpc/xmon/xmon.c index e1f33a81e5e..0e09a45ac79 100644 --- a/arch/powerpc/xmon/xmon.c +++ b/arch/powerpc/xmon/xmon.c @@ -2570,7 +2570,7 @@ static void xmon_print_symbol(unsigned long address, const char *mid, printf("%s", after); } -#ifdef CONFIG_PPC64 +#ifdef CONFIG_PPC_BOOK3S_64 static void dump_slb(void) { int i; -- cgit v1.2.3-70-g09d2 From af984b816530b4725b92e01ecfba7c5e3eab910d Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Thu, 6 Aug 2009 13:50:58 +1000 Subject: powerpc/mm: Fix encoding of page table cache numbers The mask used to encode the page table cache number in the batch when freeing page tables was too small for the new possible values of MMU page sizes. This increases it along with a comment explaining the constraints. Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/include/asm/pgalloc.h | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/powerpc/include/asm/pgalloc.h b/arch/powerpc/include/asm/pgalloc.h index 34b080671f0..f2e812de7c3 100644 --- a/arch/powerpc/include/asm/pgalloc.h +++ b/arch/powerpc/include/asm/pgalloc.h @@ -28,7 +28,12 @@ typedef struct pgtable_free { unsigned long val; } pgtable_free_t; -#define PGF_CACHENUM_MASK 0x7 +/* This needs to be big enough to allow for MMU_PAGE_COUNT + 2 to be stored + * and small enough to fit in the low bits of any naturally aligned page + * table cache entry. Arbitrarily set to 0x1f, that should give us some + * room to grow + */ +#define PGF_CACHENUM_MASK 0x1f static inline pgtable_free_t pgtable_free_cache(void *p, int cachenum, unsigned long mask) -- cgit v1.2.3-70-g09d2 From 67050b5c3e9992d98554bd224d5a7898cc4881ff Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Tue, 4 Aug 2009 22:33:32 -0500 Subject: powerpc/mm: Fix switch_mmu_context to iterate of the proper list of cpus Introduced a temporary variable into our iterating over the list cpus that are threads on the same core. For some reason Ben forgot how for loops work. Signed-off-by: Kumar Gala Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/mm/mmu_context_nohash.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/mm/mmu_context_nohash.c b/arch/powerpc/mm/mmu_context_nohash.c index 834436d6d6b..c2f93dc470e 100644 --- a/arch/powerpc/mm/mmu_context_nohash.c +++ b/arch/powerpc/mm/mmu_context_nohash.c @@ -190,7 +190,7 @@ static void context_check_map(void) { } void switch_mmu_context(struct mm_struct *prev, struct mm_struct *next) { - unsigned int id, cpu = smp_processor_id(); + unsigned int i, id, cpu = smp_processor_id(); unsigned long *map; /* No lockless fast path .. yet */ @@ -269,9 +269,10 @@ void switch_mmu_context(struct mm_struct *prev, struct mm_struct *next) local_flush_tlb_mm(next); /* XXX This clear should ultimately be part of local_flush_tlb_mm */ - for (cpu = cpu_first_thread_in_core(cpu); - cpu <= cpu_last_thread_in_core(cpu); cpu++) - __clear_bit(id, stale_map[cpu]); + for (i = cpu_first_thread_in_core(cpu); + i <= cpu_last_thread_in_core(cpu); i++) { + __clear_bit(id, stale_map[i]); + } } /* Flick the MMU and release lock */ -- cgit v1.2.3-70-g09d2 From 20d70345f181be6bdd5b0a76a408d0693683bf3d Mon Sep 17 00:00:00 2001 From: Stefan Roese Date: Wed, 29 Jul 2009 07:04:46 +0000 Subject: powerpc: Add AMCC 460EX/460GT Rev. B support to cputable.c Signed-off-by: Stefan Roese Signed-off-by: Josh Boyer Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/cputable.c | 30 ++++++++++++++++++++++++++++-- 1 file changed, 28 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c index f34ea37079b..9f38ecb1785 100644 --- a/arch/powerpc/kernel/cputable.c +++ b/arch/powerpc/kernel/cputable.c @@ -1653,7 +1653,7 @@ static struct cpu_spec __initdata cpu_specs[] = { .platform = "ppc440", }, { /* 460EX */ - .pvr_mask = 0xffff0002, + .pvr_mask = 0xffff0006, .pvr_value = 0x13020002, .cpu_name = "460EX", .cpu_features = CPU_FTRS_440x6, @@ -1665,8 +1665,21 @@ static struct cpu_spec __initdata cpu_specs[] = { .machine_check = machine_check_440A, .platform = "ppc440", }, + { /* 460EX Rev B */ + .pvr_mask = 0xffff0007, + .pvr_value = 0x13020004, + .cpu_name = "460EX Rev. B", + .cpu_features = CPU_FTRS_440x6, + .cpu_user_features = COMMON_USER_BOOKE | PPC_FEATURE_HAS_FPU, + .mmu_features = MMU_FTR_TYPE_44x, + .icache_bsize = 32, + .dcache_bsize = 32, + .cpu_setup = __setup_cpu_460ex, + .machine_check = machine_check_440A, + .platform = "ppc440", + }, { /* 460GT */ - .pvr_mask = 0xffff0002, + .pvr_mask = 0xffff0006, .pvr_value = 0x13020000, .cpu_name = "460GT", .cpu_features = CPU_FTRS_440x6, @@ -1678,6 +1691,19 @@ static struct cpu_spec __initdata cpu_specs[] = { .machine_check = machine_check_440A, .platform = "ppc440", }, + { /* 460GT Rev B */ + .pvr_mask = 0xffff0007, + .pvr_value = 0x13020005, + .cpu_name = "460GT Rev. B", + .cpu_features = CPU_FTRS_440x6, + .cpu_user_features = COMMON_USER_BOOKE | PPC_FEATURE_HAS_FPU, + .mmu_features = MMU_FTR_TYPE_44x, + .icache_bsize = 32, + .dcache_bsize = 32, + .cpu_setup = __setup_cpu_460gt, + .machine_check = machine_check_440A, + .platform = "ppc440", + }, { /* 460SX */ .pvr_mask = 0xffffff00, .pvr_value = 0x13541800, -- cgit v1.2.3-70-g09d2 From 88eeb72ec4c1ed7defff0f154c5b56798e038e2a Mon Sep 17 00:00:00 2001 From: Stefan Roese Date: Wed, 29 Jul 2009 07:05:01 +0000 Subject: powerpc/44x: Add NAND support to Canyonlands dts Also some whitespace cleanup in the USB device nodes. Signed-off-by: Stefan Roese Signed-off-by: Josh Boyer Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/boot/dts/canyonlands.dts | 49 +++++++++++++++++++++++++---------- 1 file changed, 36 insertions(+), 13 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/boot/dts/canyonlands.dts b/arch/powerpc/boot/dts/canyonlands.dts index 5fd1ad09bdf..c920170b7df 100644 --- a/arch/powerpc/boot/dts/canyonlands.dts +++ b/arch/powerpc/boot/dts/canyonlands.dts @@ -1,7 +1,7 @@ /* * Device Tree Source for AMCC Canyonlands (460EX) * - * Copyright 2008 DENX Software Engineering, Stefan Roese + * Copyright 2008-2009 DENX Software Engineering, Stefan Roese * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without @@ -149,19 +149,19 @@ /*RXDE*/ 0x5 0x4>; }; - USB0: ehci@bffd0400 { - compatible = "ibm,usb-ehci-460ex", "usb-ehci"; - interrupt-parent = <&UIC2>; - interrupts = <0x1d 4>; - reg = <4 0xbffd0400 0x90 4 0xbffd0490 0x70>; - }; + USB0: ehci@bffd0400 { + compatible = "ibm,usb-ehci-460ex", "usb-ehci"; + interrupt-parent = <&UIC2>; + interrupts = <0x1d 4>; + reg = <4 0xbffd0400 0x90 4 0xbffd0490 0x70>; + }; - USB1: usb@bffd0000 { - compatible = "ohci-le"; - reg = <4 0xbffd0000 0x60>; - interrupt-parent = <&UIC2>; - interrupts = <0x1e 4>; - }; + USB1: usb@bffd0000 { + compatible = "ohci-le"; + reg = <4 0xbffd0000 0x60>; + interrupt-parent = <&UIC2>; + interrupts = <0x1e 4>; + }; POB0: opb { compatible = "ibm,opb-460ex", "ibm,opb"; @@ -215,6 +215,29 @@ reg = <0x03fa0000 0x00060000>; }; }; + + ndfc@3,0 { + compatible = "ibm,ndfc"; + reg = <0x00000003 0x00000000 0x00002000>; + ccr = <0x00001000>; + bank-settings = <0x80002222>; + #address-cells = <1>; + #size-cells = <1>; + + nand { + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x00000000 0x00100000>; + }; + partition@100000 { + label = "user"; + reg = <0x00000000 0x03f00000>; + }; + }; + }; }; UART0: serial@ef600300 { -- cgit v1.2.3-70-g09d2 From 13ae564f1db967dd4ea244f21f3dad6a28fa351c Mon Sep 17 00:00:00 2001 From: Stefan Roese Date: Wed, 29 Jul 2009 01:40:56 +0000 Subject: powerpc/40x: Update Kilauea dts to support NAND, RTC and HWMON This patch adds support for the following devices to the Kilauea dts: - PPC4xx NAND controller (NDFC) - I2C RTC (Dallas DS1338) - I2C HWMON (Dallas DS1775) Additionally the partitioning of the NOR FLASH is changed. The dtb partition has been missing. Fixed in this patch. Signed-off-by: Stefan Roese Signed-off-by: Josh Boyer Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/boot/dts/kilauea.dts | 44 ++++++++++++++++++++++++++++++++++++--- 1 file changed, 41 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/boot/dts/kilauea.dts b/arch/powerpc/boot/dts/kilauea.dts index 5e6b08ff6f6..c46561456ed 100644 --- a/arch/powerpc/boot/dts/kilauea.dts +++ b/arch/powerpc/boot/dts/kilauea.dts @@ -1,7 +1,7 @@ /* * Device Tree Source for AMCC Kilauea (405EX) * - * Copyright 2007 DENX Software Engineering, Stefan Roese + * Copyright 2007-2009 DENX Software Engineering, Stefan Roese * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without @@ -150,7 +150,11 @@ #size-cells = <1>; partition@0 { label = "kernel"; - reg = <0x00000000 0x00200000>; + reg = <0x00000000 0x001e0000>; + }; + partition@1e0000 { + label = "dtb"; + reg = <0x001e0000 0x00020000>; }; partition@200000 { label = "root"; @@ -169,6 +173,29 @@ reg = <0x03fa0000 0x00060000>; }; }; + + ndfc@1,0 { + compatible = "ibm,ndfc"; + reg = <0x00000001 0x00000000 0x00002000>; + ccr = <0x00001000>; + bank-settings = <0x80002222>; + #address-cells = <1>; + #size-cells = <1>; + + nand { + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x00000000 0x00100000>; + }; + partition@100000 { + label = "user"; + reg = <0x00000000 0x03f00000>; + }; + }; + }; }; UART0: serial@ef600200 { @@ -198,6 +225,18 @@ reg = <0xef600400 0x00000014>; interrupt-parent = <&UIC0>; interrupts = <0x2 0x4>; + #address-cells = <1>; + #size-cells = <0>; + + rtc@68 { + compatible = "dallas,ds1338"; + reg = <0x68>; + }; + + dtt@48 { + compatible = "dallas,ds1775"; + reg = <0x48>; + }; }; IIC1: i2c@ef600500 { @@ -207,7 +246,6 @@ interrupts = <0x7 0x4>; }; - RGMII0: emac-rgmii@ef600b00 { compatible = "ibm,rgmii-405ex", "ibm,rgmii"; reg = <0xef600b00 0x00000104>; -- cgit v1.2.3-70-g09d2 From 0e8e844246fcf9c38906b62e5d05891dbbda5754 Mon Sep 17 00:00:00 2001 From: Stefan Roese Date: Wed, 29 Jul 2009 07:05:11 +0000 Subject: powerpc/44x: Update Canyonlands defconfig to support NOR, NAND and RTC This patch adds support for the following devices to the Canyonlands defconfig file: - NOR FLASH - PPC4xx NAND controller (NDFC) - I2C RTC (M41T80) Signed-off-by: Stefan Roese Signed-off-by: Josh Boyer Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/configs/44x/canyonlands_defconfig | 350 +++++++++++++++++++++---- 1 file changed, 297 insertions(+), 53 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/configs/44x/canyonlands_defconfig b/arch/powerpc/configs/44x/canyonlands_defconfig index 5e85412eb9f..b312b166be6 100644 --- a/arch/powerpc/configs/44x/canyonlands_defconfig +++ b/arch/powerpc/configs/44x/canyonlands_defconfig @@ -1,14 +1,14 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc3 -# Mon Feb 2 13:13:04 2009 +# Linux kernel version: 2.6.31-rc4 +# Wed Jul 29 17:27:20 2009 # # CONFIG_PPC64 is not set # # Processor support # -# CONFIG_6xx is not set +# CONFIG_PPC_BOOK3S_32 is not set # CONFIG_PPC_85xx is not set # CONFIG_PPC_8xx is not set # CONFIG_40x is not set @@ -31,15 +31,16 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_FIND_NEXT_BIT=y # CONFIG_ARCH_NO_VIRT_TO_BUS is not set CONFIG_PPC=y @@ -53,11 +54,14 @@ CONFIG_PPC_UDBG_16550=y # CONFIG_GENERIC_TBSYNC is not set CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y +CONFIG_DTC=y # CONFIG_DEFAULT_UIMAGE is not set CONFIG_PPC_DCR_NATIVE=y # CONFIG_PPC_DCR_MMIO is not set CONFIG_PPC_DCR=y +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -71,6 +75,7 @@ CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set @@ -93,8 +98,12 @@ CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y @@ -104,23 +113,30 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y +CONFIG_HAVE_PERF_COUNTERS=y + +# +# Performance Counters +# +# CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y +# CONFIG_STRIP_ASM_SYMS is not set +CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y @@ -128,6 +144,12 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y + +# +# GCOV-based kernel profiling +# +# CONFIG_GCOV_KERNEL is not set +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -139,8 +161,7 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y -CONFIG_LBD=y -# CONFIG_BLK_DEV_IO_TRACE is not set +CONFIG_LBDAF=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -176,6 +197,7 @@ CONFIG_PPC4xx_PCI_EXPRESS=y # CONFIG_ARCHES is not set CONFIG_CANYONLANDS=y # CONFIG_GLACIER is not set +# CONFIG_REDWOOD is not set # CONFIG_YOSEMITE is not set # CONFIG_XILINX_VIRTEX440_GENERIC_BOARD is not set CONFIG_PPC44x_SIMPLE=y @@ -218,6 +240,7 @@ CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set # CONFIG_MATH_EMULATION is not set # CONFIG_IOMMU_HELPER is not set +# CONFIG_SWIOTLB is not set CONFIG_PPC_NEED_DMA_SYNC_OPS=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y @@ -237,10 +260,14 @@ CONFIG_PHYS_ADDR_T_64BIT=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 +CONFIG_STDBINUTILS=y CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set +# CONFIG_PPC_256K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y CONFIG_CMDLINE_BOOL=y @@ -265,6 +292,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_LEGACY is not set # CONFIG_PCI_DEBUG is not set # CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -282,14 +310,12 @@ CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0xc0000000 -CONFIG_CONSISTENT_START=0xff100000 CONFIG_CONSISTENT_SIZE=0x00200000 CONFIG_NET=y # # Networking options # -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -339,6 +365,8 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -351,7 +379,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set # CONFIG_WIRELESS is not set # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set @@ -375,7 +402,101 @@ CONFIG_EXTRA_FIRMWARE="" # CONFIG_SYS_HYPERVISOR is not set CONFIG_CONNECTOR=y CONFIG_PROC_EVENTS=y -# CONFIG_MTD is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_TESTS is not set +# CONFIG_MTD_REDBOOT_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y +CONFIG_MTD_OF_PARTS=y +# CONFIG_MTD_AR7_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_CFI_INTELEXT is not set +CONFIG_MTD_CFI_AMDSTD=y +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +# CONFIG_MTD_PHYSMAP is not set +CONFIG_MTD_PHYSMAP_OF=y +# CONFIG_MTD_INTEL_VR_NOR is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_PMC551 is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +CONFIG_MTD_NAND=y +# CONFIG_MTD_NAND_VERIFY_WRITE is not set +CONFIG_MTD_NAND_ECC_SMC=y +# CONFIG_MTD_NAND_MUSEUM_IDS is not set +CONFIG_MTD_NAND_IDS=y +CONFIG_MTD_NAND_NDFC=y +# CONFIG_MTD_NAND_DISKONCHIP is not set +# CONFIG_MTD_NAND_CAFE is not set +# CONFIG_MTD_NAND_NANDSIM is not set +# CONFIG_MTD_NAND_PLATFORM is not set +# CONFIG_MTD_ALAUDA is not set +# CONFIG_MTD_NAND_FSL_ELBC is not set +# CONFIG_MTD_ONENAND is not set + +# +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set CONFIG_OF_DEVICE=y CONFIG_OF_I2C=y # CONFIG_PARPORT is not set @@ -418,7 +539,11 @@ CONFIG_HAVE_IDE=y # # -# Enable only one of the two stacks, unless you know what you are doing +# You can enable one or both FireWire driver stacks. +# + +# +# See the help texts for more information. # # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set @@ -439,6 +564,8 @@ CONFIG_NET_ETHERNET=y # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set CONFIG_IBM_NEW_EMAC=y @@ -457,6 +584,7 @@ CONFIG_IBM_NEW_EMAC_EMAC4=y # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_NET_PCI is not set # CONFIG_B44 is not set +# CONFIG_KS8842 is not set # CONFIG_ATL2 is not set # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set @@ -467,7 +595,6 @@ CONFIG_IBM_NEW_EMAC_EMAC4=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -542,7 +669,6 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set # CONFIG_HW_RANDOM is not set # CONFIG_NVRAM is not set -# CONFIG_GEN_RTC is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # CONFIG_RAW_DRIVER is not set @@ -608,14 +734,17 @@ CONFIG_I2C_IBM_IIC=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set + +# +# PPS support +# +# CONFIG_PPS is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_GPIOLIB is not set # CONFIG_W1 is not set @@ -640,6 +769,7 @@ CONFIG_SENSORS_AD7414=y # CONFIG_SENSORS_F71805F is not set # CONFIG_SENSORS_F71882FG is not set # CONFIG_SENSORS_F75375S is not set +# CONFIG_SENSORS_G760A is not set # CONFIG_SENSORS_GL518SM is not set # CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set @@ -654,11 +784,14 @@ CONFIG_SENSORS_AD7414=y # CONFIG_SENSORS_LM90 is not set # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_LTC4215 is not set # CONFIG_SENSORS_LTC4245 is not set +# CONFIG_SENSORS_LM95241 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_SIS5595 is not set # CONFIG_SENSORS_DME1737 is not set # CONFIG_SENSORS_SMSC47M1 is not set @@ -666,6 +799,7 @@ CONFIG_SENSORS_AD7414=y # CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_ADS7828 is not set # CONFIG_SENSORS_THMC50 is not set +# CONFIG_SENSORS_TMP401 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_VT8231 is not set @@ -700,24 +834,9 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set +# CONFIG_AB3100_CORE is not set # CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -# CONFIG_DAB is not set -# CONFIG_USB_DABUSB is not set +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support @@ -759,6 +878,7 @@ CONFIG_USB_MON=y # USB Host Controller Drivers # # CONFIG_USB_C67X00_HCD is not set +# CONFIG_USB_XHCI_HCD is not set CONFIG_USB_EHCI_HCD=m # CONFIG_USB_EHCI_ROOT_HUB_TT is not set # CONFIG_USB_EHCI_TT_NEWSCHED is not set @@ -767,9 +887,9 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set CONFIG_USB_OHCI_HCD=y -CONFIG_USB_OHCI_HCD_PPC_OF=y CONFIG_USB_OHCI_HCD_PPC_OF_BE=y CONFIG_USB_OHCI_HCD_PPC_OF_LE=y +CONFIG_USB_OHCI_HCD_PPC_OF=y CONFIG_USB_OHCI_HCD_PCI=y CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y @@ -789,11 +909,11 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_TMC is not set # -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # -# see USB_STORAGE Help for more information +# also be needed; see USB_STORAGE Help for more info # CONFIG_USB_LIBUSUAL=y @@ -821,7 +941,6 @@ CONFIG_USB_LIBUSUAL=y # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set -# CONFIG_USB_PHIDGET is not set # CONFIG_USB_IDMOUSE is not set # CONFIG_USB_FTDI_ELAN is not set # CONFIG_USB_APPLEDISPLAY is not set @@ -837,6 +956,7 @@ CONFIG_USB_LIBUSUAL=y # # OTG and related infrastructure # +# CONFIG_NOP_USB_XCEIV is not set # CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set @@ -844,9 +964,70 @@ CONFIG_USB_LIBUSUAL=y # CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set # CONFIG_EDAC is not set -# CONFIG_RTC_CLASS is not set +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# I2C RTC drivers +# +# CONFIG_RTC_DRV_DS1307 is not set +# CONFIG_RTC_DRV_DS1374 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_MAX6900 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_X1205 is not set +# CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_PCF8583 is not set +CONFIG_RTC_DRV_M41T80=y +# CONFIG_RTC_DRV_M41T80_WDT is not set +# CONFIG_RTC_DRV_S35390A is not set +# CONFIG_RTC_DRV_FM3130 is not set +# CONFIG_RTC_DRV_RX8581 is not set +# CONFIG_RTC_DRV_RX8025 is not set + +# +# SPI RTC drivers +# + +# +# Platform RTC drivers +# +# CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1286 is not set +# CONFIG_RTC_DRV_DS1511 is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# on-CPU RTC drivers +# +# CONFIG_RTC_DRV_GENERIC is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -860,11 +1041,12 @@ CONFIG_EXT2_FS=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -873,6 +1055,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -906,6 +1093,7 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set +# CONFIG_JFFS2_FS is not set CONFIG_CRAMFS=y # CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set @@ -916,6 +1104,7 @@ CONFIG_CRAMFS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -927,7 +1116,6 @@ CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_REGISTER_V4 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -941,8 +1129,48 @@ CONFIG_SUNRPC=y # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y -# CONFIG_NLS is not set +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +# CONFIG_NLS_CODEPAGE_437 is not set +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +# CONFIG_NLS_ISO8859_1 is not set +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set # CONFIG_DLM is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines @@ -957,11 +1185,13 @@ CONFIG_CRC32=y # CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y -CONFIG_PLIST=y +CONFIG_DECOMPRESS_GZIP=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y +CONFIG_GENERIC_ATOMIC64=y # # Kernel hacking @@ -979,6 +1209,9 @@ CONFIG_DEBUG_KERNEL=y CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set @@ -989,6 +1222,9 @@ CONFIG_SCHED_DEBUG=y # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set @@ -1000,7 +1236,6 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set -# CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set @@ -1008,27 +1243,36 @@ CONFIG_SCHED_DEBUG=y # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y +# CONFIG_DEBUG_PAGEALLOC is not set CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y - -# -# Tracers -# +CONFIG_TRACING_SUPPORT=y +CONFIG_FTRACE=y # CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set # CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_ENABLE_DEFAULT_TRACERS is not set # CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set +CONFIG_BRANCH_PROFILE_NONE=y +# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set +# CONFIG_PROFILE_ALL_BRANCHES is not set # CONFIG_STACK_TRACER is not set -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_DYNAMIC_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set +# CONFIG_KMEMCHECK is not set +# CONFIG_PPC_DISABLE_WERROR is not set +CONFIG_PPC_WERROR=y CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set -# CONFIG_DEBUG_PAGEALLOC is not set +# CONFIG_PPC_EMULATED_STATS is not set # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set # CONFIG_MSI_BITMAP_SELFTEST is not set -- cgit v1.2.3-70-g09d2 From 6b045a818f1d0b9b68c1d47e745d521dd115991a Mon Sep 17 00:00:00 2001 From: Stefan Roese Date: Wed, 29 Jul 2009 01:41:06 +0000 Subject: powerpc/40x: Update kilauea defconfig to support NAND, RTC and HWMON This patch adds support for the following devices to the Kilauea defconfig file: - PPC4xx NAND controller (NDFC) - I2C RTC (Dallas DS1338) - I2C HWMON (Dallas DS1775) Signed-off-by: Stefan Roese Signed-off-by: Josh Boyer Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/configs/40x/kilauea_defconfig | 298 +++++++++++++++++++++++++---- 1 file changed, 256 insertions(+), 42 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/configs/40x/kilauea_defconfig b/arch/powerpc/configs/40x/kilauea_defconfig index 865725effe9..9a05ec0ec31 100644 --- a/arch/powerpc/configs/40x/kilauea_defconfig +++ b/arch/powerpc/configs/40x/kilauea_defconfig @@ -1,14 +1,14 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.30-rc7 -# Wed Jun 3 10:18:16 2009 +# Linux kernel version: 2.6.31-rc4 +# Wed Jul 29 13:28:37 2009 # # CONFIG_PPC64 is not set # # Processor support # -# CONFIG_6xx is not set +# CONFIG_PPC_BOOK3S_32 is not set # CONFIG_PPC_85xx is not set # CONFIG_PPC_8xx is not set CONFIG_40x=y @@ -32,11 +32,11 @@ CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_FIND_NEXT_BIT=y # CONFIG_ARCH_NO_VIRT_TO_BUS is not set CONFIG_PPC=y @@ -57,6 +57,7 @@ CONFIG_PPC_DCR_NATIVE=y CONFIG_PPC_DCR=y CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -108,7 +109,6 @@ CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y CONFIG_KALLSYMS_EXTRA_PASS=y -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y @@ -121,9 +121,16 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y +CONFIG_HAVE_PERF_COUNTERS=y + +# +# Performance Counters +# +# CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y @@ -137,6 +144,11 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y + +# +# GCOV-based kernel profiling +# +# CONFIG_GCOV_KERNEL is not set # CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y @@ -149,7 +161,7 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y -CONFIG_LBD=y +CONFIG_LBDAF=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -220,6 +232,7 @@ CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set # CONFIG_MATH_EMULATION is not set # CONFIG_IOMMU_HELPER is not set +# CONFIG_SWIOTLB is not set CONFIG_PPC_NEED_DMA_SYNC_OPS=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y @@ -239,9 +252,9 @@ CONFIG_MIGRATION=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_UNEVICTABLE_LRU=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set @@ -344,6 +357,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -393,9 +407,8 @@ CONFIG_MTD_OF_PARTS=y # User Modules And Translation Layers # CONFIG_MTD_CHAR=y -CONFIG_MTD_BLKDEVS=m -CONFIG_MTD_BLOCK=m -# CONFIG_MTD_BLOCK_RO is not set +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y # CONFIG_FTL is not set # CONFIG_NFTL is not set # CONFIG_INFTL is not set @@ -452,7 +465,17 @@ CONFIG_MTD_PHYSMAP_OF=y # CONFIG_MTD_DOC2000 is not set # CONFIG_MTD_DOC2001 is not set # CONFIG_MTD_DOC2001PLUS is not set -# CONFIG_MTD_NAND is not set +CONFIG_MTD_NAND=y +# CONFIG_MTD_NAND_VERIFY_WRITE is not set +CONFIG_MTD_NAND_ECC_SMC=y +# CONFIG_MTD_NAND_MUSEUM_IDS is not set +CONFIG_MTD_NAND_IDS=y +CONFIG_MTD_NAND_NDFC=y +# CONFIG_MTD_NAND_DISKONCHIP is not set +# CONFIG_MTD_NAND_CAFE is not set +# CONFIG_MTD_NAND_NANDSIM is not set +# CONFIG_MTD_NAND_PLATFORM is not set +# CONFIG_MTD_NAND_FSL_ELBC is not set # CONFIG_MTD_ONENAND is not set # @@ -465,6 +488,7 @@ CONFIG_MTD_PHYSMAP_OF=y # # CONFIG_MTD_UBI is not set CONFIG_OF_DEVICE=y +CONFIG_OF_I2C=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set @@ -504,14 +528,17 @@ CONFIG_HAVE_IDE=y # # -# Enable only one of the two stacks, unless you know what you are doing +# You can enable one or both FireWire driver stacks. +# + +# +# See the help texts for more information. # # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -546,6 +573,7 @@ CONFIG_IBM_NEW_EMAC_EMAC4=y # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_NET_PCI is not set # CONFIG_B44 is not set +# CONFIG_KS8842 is not set # CONFIG_ATL2 is not set # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set @@ -621,20 +649,150 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set # CONFIG_HW_RANDOM is not set # CONFIG_NVRAM is not set -# CONFIG_GEN_RTC is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # CONFIG_RAW_DRIVER is not set # CONFIG_TCG_TPM is not set CONFIG_DEVPORT=y -# CONFIG_I2C is not set +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_CHARDEV=y +CONFIG_I2C_HELPER_AUTO=y + +# +# I2C Hardware Bus support +# + +# +# PC SMBus host controller drivers +# +# CONFIG_I2C_ALI1535 is not set +# CONFIG_I2C_ALI1563 is not set +# CONFIG_I2C_ALI15X3 is not set +# CONFIG_I2C_AMD756 is not set +# CONFIG_I2C_AMD8111 is not set +# CONFIG_I2C_I801 is not set +# CONFIG_I2C_ISCH is not set +# CONFIG_I2C_PIIX4 is not set +# CONFIG_I2C_NFORCE2 is not set +# CONFIG_I2C_SIS5595 is not set +# CONFIG_I2C_SIS630 is not set +# CONFIG_I2C_SIS96X is not set +# CONFIG_I2C_VIA is not set +# CONFIG_I2C_VIAPRO is not set + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +CONFIG_I2C_IBM_IIC=y +# CONFIG_I2C_MPC is not set +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set + +# +# Graphics adapter I2C/DDC channel drivers +# +# CONFIG_I2C_VOODOO3 is not set + +# +# Other I2C/SMBus bus drivers +# +# CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_STUB is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_DS1682 is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_PCF8575 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set + +# +# PPS support +# +# CONFIG_PPS is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_GPIOLIB is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set -# CONFIG_HWMON is not set +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_AD7414 is not set +# CONFIG_SENSORS_AD7418 is not set +# CONFIG_SENSORS_ADM1021 is not set +# CONFIG_SENSORS_ADM1025 is not set +# CONFIG_SENSORS_ADM1026 is not set +# CONFIG_SENSORS_ADM1029 is not set +# CONFIG_SENSORS_ADM1031 is not set +# CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ADT7462 is not set +# CONFIG_SENSORS_ADT7470 is not set +# CONFIG_SENSORS_ADT7473 is not set +# CONFIG_SENSORS_ADT7475 is not set +# CONFIG_SENSORS_ATXP1 is not set +# CONFIG_SENSORS_DS1621 is not set +# CONFIG_SENSORS_I5K_AMB is not set +# CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_F71882FG is not set +# CONFIG_SENSORS_F75375S is not set +# CONFIG_SENSORS_G760A is not set +# CONFIG_SENSORS_GL518SM is not set +# CONFIG_SENSORS_GL520SM is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_LM63 is not set +CONFIG_SENSORS_LM75=y +# CONFIG_SENSORS_LM77 is not set +# CONFIG_SENSORS_LM78 is not set +# CONFIG_SENSORS_LM80 is not set +# CONFIG_SENSORS_LM83 is not set +# CONFIG_SENSORS_LM85 is not set +# CONFIG_SENSORS_LM87 is not set +# CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set +# CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_LTC4215 is not set +# CONFIG_SENSORS_LTC4245 is not set +# CONFIG_SENSORS_LM95241 is not set +# CONFIG_SENSORS_MAX1619 is not set +# CONFIG_SENSORS_MAX6650 is not set +# CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_SIS5595 is not set +# CONFIG_SENSORS_DME1737 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47M192 is not set +# CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_ADS7828 is not set +# CONFIG_SENSORS_THMC50 is not set +# CONFIG_SENSORS_TMP401 is not set +# CONFIG_SENSORS_VIA686A is not set +# CONFIG_SENSORS_VT1211 is not set +# CONFIG_SENSORS_VT8231 is not set +# CONFIG_SENSORS_W83781D is not set +# CONFIG_SENSORS_W83791D is not set +# CONFIG_SENSORS_W83792D is not set +# CONFIG_SENSORS_W83793 is not set +# CONFIG_SENSORS_W83L785TS is not set +# CONFIG_SENSORS_W83L786NG is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set +# CONFIG_HWMON_DEBUG_CHIP is not set CONFIG_THERMAL=y +# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set CONFIG_SSB_POSSIBLE=y @@ -649,24 +807,15 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_PCF50633 is not set +# CONFIG_AB3100_CORE is not set # CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -# CONFIG_DAB is not set +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support @@ -691,10 +840,69 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set # CONFIG_EDAC is not set -# CONFIG_RTC_CLASS is not set +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# I2C RTC drivers +# +CONFIG_RTC_DRV_DS1307=y +# CONFIG_RTC_DRV_DS1374 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_MAX6900 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_X1205 is not set +# CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_PCF8583 is not set +# CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_S35390A is not set +# CONFIG_RTC_DRV_FM3130 is not set +# CONFIG_RTC_DRV_RX8581 is not set +# CONFIG_RTC_DRV_RX8025 is not set + +# +# SPI RTC drivers +# + +# +# Platform RTC drivers +# +# CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1286 is not set +# CONFIG_RTC_DRV_DS1511 is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# on-CPU RTC drivers +# +# CONFIG_RTC_DRV_GENERIC is not set # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -708,11 +916,12 @@ CONFIG_EXT2_FS=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -818,6 +1027,7 @@ CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y CONFIG_NLATTR=y +CONFIG_GENERIC_ATOMIC64=y # # Kernel hacking @@ -848,6 +1058,9 @@ CONFIG_SCHED_DEBUG=y # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set @@ -859,7 +1072,6 @@ CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set -# CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set @@ -873,16 +1085,15 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_TRACING_SUPPORT=y - -# -# Tracers -# +CONFIG_FTRACE=y # CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set # CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_EVENT_TRACER is not set +# CONFIG_ENABLE_DEFAULT_TRACERS is not set # CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set +CONFIG_BRANCH_PROFILE_NONE=y +# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set +# CONFIG_PROFILE_ALL_BRANCHES is not set # CONFIG_STACK_TRACER is not set # CONFIG_KMEMTRACE is not set # CONFIG_WORKQUEUE_TRACER is not set @@ -891,6 +1102,9 @@ CONFIG_TRACING_SUPPORT=y # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set +# CONFIG_KMEMCHECK is not set +# CONFIG_PPC_DISABLE_WERROR is not set +CONFIG_PPC_WERROR=y CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set -- cgit v1.2.3-70-g09d2 From 189339d47d30ad171aa1c95ffc90a6177b3ce4a8 Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Thu, 30 Jul 2009 17:56:38 -0500 Subject: powerpc/85xx: Move mpc8536ds.dts to address-cells/size-cells = <2> Change the top-level #address-cells and #size-cells to <2> so the mpc8536ds.dts is easier to deal with both a true 32-bit physical or 36-bit physical address space. Signed-off-by: Kumar Gala Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/boot/dts/mpc8536ds.dts | 32 ++++++++++++++++---------------- 1 file changed, 16 insertions(+), 16 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/boot/dts/mpc8536ds.dts b/arch/powerpc/boot/dts/mpc8536ds.dts index e781ad2f1f8..22caf69e6ef 100644 --- a/arch/powerpc/boot/dts/mpc8536ds.dts +++ b/arch/powerpc/boot/dts/mpc8536ds.dts @@ -14,8 +14,8 @@ / { model = "fsl,mpc8536ds"; compatible = "fsl,mpc8536ds"; - #address-cells = <1>; - #size-cells = <1>; + #address-cells = <2>; + #size-cells = <2>; aliases { ethernet0 = &enet0; @@ -42,7 +42,7 @@ memory { device_type = "memory"; - reg = <00000000 00000000>; // Filled by U-Boot + reg = <0 0 0 0>; // Filled by U-Boot }; soc@ffe00000 { @@ -50,7 +50,7 @@ #size-cells = <1>; device_type = "soc"; compatible = "simple-bus"; - ranges = <0x0 0xffe00000 0x100000>; + ranges = <0x0 0 0xffe00000 0x100000>; bus-frequency = <0>; // Filled out by uboot. ecm-law@0 { @@ -347,13 +347,13 @@ interrupt-parent = <&mpic>; interrupts = <24 0x2>; bus-range = <0 0xff>; - ranges = <0x02000000 0 0x80000000 0x80000000 0 0x10000000 - 0x01000000 0 0x00000000 0xffc00000 0 0x00010000>; + ranges = <0x02000000 0 0x80000000 0 0x80000000 0 0x10000000 + 0x01000000 0 0x00000000 0 0xffc00000 0 0x00010000>; clock-frequency = <66666666>; #interrupt-cells = <1>; #size-cells = <2>; #address-cells = <3>; - reg = <0xffe08000 0x1000>; + reg = <0 0xffe08000 0 0x1000>; }; pci1: pcie@ffe09000 { @@ -362,10 +362,10 @@ #interrupt-cells = <1>; #size-cells = <2>; #address-cells = <3>; - reg = <0xffe09000 0x1000>; + reg = <0 0xffe09000 0 0x1000>; bus-range = <0 0xff>; - ranges = <0x02000000 0 0x98000000 0x98000000 0 0x08000000 - 0x01000000 0 0x00000000 0xffc20000 0 0x00010000>; + ranges = <0x02000000 0 0x98000000 0 0x98000000 0 0x08000000 + 0x01000000 0 0x00000000 0 0xffc20000 0 0x00010000>; clock-frequency = <33333333>; interrupt-parent = <&mpic>; interrupts = <25 0x2>; @@ -398,10 +398,10 @@ #interrupt-cells = <1>; #size-cells = <2>; #address-cells = <3>; - reg = <0xffe0a000 0x1000>; + reg = <0 0xffe0a000 0 0x1000>; bus-range = <0 0xff>; - ranges = <0x02000000 0 0x90000000 0x90000000 0 0x08000000 - 0x01000000 0 0x00000000 0xffc10000 0 0x00010000>; + ranges = <0x02000000 0 0x90000000 0 0x90000000 0 0x08000000 + 0x01000000 0 0x00000000 0 0xffc10000 0 0x00010000>; clock-frequency = <33333333>; interrupt-parent = <&mpic>; interrupts = <26 0x2>; @@ -434,10 +434,10 @@ #interrupt-cells = <1>; #size-cells = <2>; #address-cells = <3>; - reg = <0xffe0b000 0x1000>; + reg = <0 0xffe0b000 0 0x1000>; bus-range = <0 0xff>; - ranges = <0x02000000 0 0xa0000000 0xa0000000 0 0x20000000 - 0x01000000 0 0x00000000 0xffc30000 0 0x00010000>; + ranges = <0x02000000 0 0xa0000000 0 0xa0000000 0 0x20000000 + 0x01000000 0 0x00000000 0 0xffc30000 0 0x00010000>; clock-frequency = <33333333>; interrupt-parent = <&mpic>; interrupts = <27 0x2>; -- cgit v1.2.3-70-g09d2 From b6c316a1f6447d6dd0fd8d443b66643e328e04fa Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Thu, 30 Jul 2009 17:56:54 -0500 Subject: powerpc/85xx: Added 36-bit physical device tree for mpc8536ds board Added a device tree that should be similiar to mpc8536ds.dtb except the physical addresses for all IO are above the 4G boundary. Signed-off-by: Kumar Gala Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/boot/dts/mpc8536ds_36b.dts | 467 ++++++++++++++++++++++++++++++++ 1 file changed, 467 insertions(+) create mode 100644 arch/powerpc/boot/dts/mpc8536ds_36b.dts (limited to 'arch') diff --git a/arch/powerpc/boot/dts/mpc8536ds_36b.dts b/arch/powerpc/boot/dts/mpc8536ds_36b.dts new file mode 100644 index 00000000000..113ed8b7c89 --- /dev/null +++ b/arch/powerpc/boot/dts/mpc8536ds_36b.dts @@ -0,0 +1,467 @@ +/* + * MPC8536 DS Device Tree Source + * + * Copyright 2008-2009 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/dts-v1/; + +/ { + model = "fsl,mpc8536ds"; + compatible = "fsl,mpc8536ds"; + #address-cells = <2>; + #size-cells = <2>; + + aliases { + ethernet0 = &enet0; + ethernet1 = &enet1; + serial0 = &serial0; + serial1 = &serial1; + pci0 = &pci0; + pci1 = &pci1; + pci2 = &pci2; + pci3 = &pci3; + }; + + cpus { + #cpus = <1>; + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,8536@0 { + device_type = "cpu"; + reg = <0>; + next-level-cache = <&L2>; + }; + }; + + memory { + device_type = "memory"; + reg = <0 0 0 0>; // Filled by U-Boot + }; + + soc@fffe00000 { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + compatible = "simple-bus"; + ranges = <0x0 0xf 0xffe00000 0x100000>; + bus-frequency = <0>; // Filled out by uboot. + + ecm-law@0 { + compatible = "fsl,ecm-law"; + reg = <0x0 0x1000>; + fsl,num-laws = <12>; + }; + + ecm@1000 { + compatible = "fsl,mpc8536-ecm", "fsl,ecm"; + reg = <0x1000 0x1000>; + interrupts = <17 2>; + interrupt-parent = <&mpic>; + }; + + memory-controller@2000 { + compatible = "fsl,mpc8536-memory-controller"; + reg = <0x2000 0x1000>; + interrupt-parent = <&mpic>; + interrupts = <18 0x2>; + }; + + L2: l2-cache-controller@20000 { + compatible = "fsl,mpc8536-l2-cache-controller"; + reg = <0x20000 0x1000>; + interrupt-parent = <&mpic>; + interrupts = <16 0x2>; + }; + + i2c@3000 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; + compatible = "fsl-i2c"; + reg = <0x3000 0x100>; + interrupts = <43 0x2>; + interrupt-parent = <&mpic>; + dfsrr; + }; + + i2c@3100 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <1>; + compatible = "fsl-i2c"; + reg = <0x3100 0x100>; + interrupts = <43 0x2>; + interrupt-parent = <&mpic>; + dfsrr; + rtc@68 { + compatible = "dallas,ds3232"; + reg = <0x68>; + interrupts = <0 0x1>; + interrupt-parent = <&mpic>; + }; + }; + + dma@21300 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8536-dma", "fsl,eloplus-dma"; + reg = <0x21300 4>; + ranges = <0 0x21100 0x200>; + cell-index = <0>; + dma-channel@0 { + compatible = "fsl,mpc8536-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x0 0x80>; + cell-index = <0>; + interrupt-parent = <&mpic>; + interrupts = <20 2>; + }; + dma-channel@80 { + compatible = "fsl,mpc8536-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x80 0x80>; + cell-index = <1>; + interrupt-parent = <&mpic>; + interrupts = <21 2>; + }; + dma-channel@100 { + compatible = "fsl,mpc8536-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x100 0x80>; + cell-index = <2>; + interrupt-parent = <&mpic>; + interrupts = <22 2>; + }; + dma-channel@180 { + compatible = "fsl,mpc8536-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x180 0x80>; + cell-index = <3>; + interrupt-parent = <&mpic>; + interrupts = <23 2>; + }; + }; + + usb@22000 { + compatible = "fsl,mpc8536-usb2-mph", "fsl-usb2-mph"; + reg = <0x22000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupt-parent = <&mpic>; + interrupts = <28 0x2>; + phy_type = "ulpi"; + }; + + usb@23000 { + compatible = "fsl,mpc8536-usb2-mph", "fsl-usb2-mph"; + reg = <0x23000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupt-parent = <&mpic>; + interrupts = <46 0x2>; + phy_type = "ulpi"; + }; + + enet0: ethernet@24000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <0>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <0x24000 0x1000>; + ranges = <0x0 0x24000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <29 2 30 2 34 2>; + interrupt-parent = <&mpic>; + tbi-handle = <&tbi0>; + phy-handle = <&phy1>; + phy-connection-type = "rgmii-id"; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-mdio"; + reg = <0x520 0x20>; + + phy0: ethernet-phy@0 { + interrupt-parent = <&mpic>; + interrupts = <10 0x1>; + reg = <0>; + device_type = "ethernet-phy"; + }; + phy1: ethernet-phy@1 { + interrupt-parent = <&mpic>; + interrupts = <10 0x1>; + reg = <1>; + device_type = "ethernet-phy"; + }; + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + }; + + enet1: ethernet@26000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <1>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <0x26000 0x1000>; + ranges = <0x0 0x26000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <31 2 32 2 33 2>; + interrupt-parent = <&mpic>; + tbi-handle = <&tbi1>; + phy-handle = <&phy0>; + phy-connection-type = "rgmii-id"; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x520 0x20>; + + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + }; + + usb@2b000 { + compatible = "fsl,mpc8536-usb2-dr", "fsl-usb2-dr"; + reg = <0x2b000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupt-parent = <&mpic>; + interrupts = <60 0x2>; + dr_mode = "peripheral"; + phy_type = "ulpi"; + }; + + serial0: serial@4500 { + cell-index = <0>; + device_type = "serial"; + compatible = "ns16550"; + reg = <0x4500 0x100>; + clock-frequency = <0>; + interrupts = <42 0x2>; + interrupt-parent = <&mpic>; + }; + + serial1: serial@4600 { + cell-index = <1>; + device_type = "serial"; + compatible = "ns16550"; + reg = <0x4600 0x100>; + clock-frequency = <0>; + interrupts = <42 0x2>; + interrupt-parent = <&mpic>; + }; + + crypto@30000 { + compatible = "fsl,sec3.0", "fsl,sec2.4", "fsl,sec2.2", + "fsl,sec2.1", "fsl,sec2.0"; + reg = <0x30000 0x10000>; + interrupts = <45 2 58 2>; + interrupt-parent = <&mpic>; + fsl,num-channels = <4>; + fsl,channel-fifo-len = <24>; + fsl,exec-units-mask = <0x9fe>; + fsl,descriptor-types-mask = <0x3ab0ebf>; + }; + + sata@18000 { + compatible = "fsl,mpc8536-sata", "fsl,pq-sata"; + reg = <0x18000 0x1000>; + cell-index = <1>; + interrupts = <74 0x2>; + interrupt-parent = <&mpic>; + }; + + sata@19000 { + compatible = "fsl,mpc8536-sata", "fsl,pq-sata"; + reg = <0x19000 0x1000>; + cell-index = <2>; + interrupts = <41 0x2>; + interrupt-parent = <&mpic>; + }; + + global-utilities@e0000 { //global utilities block + compatible = "fsl,mpc8548-guts"; + reg = <0xe0000 0x1000>; + fsl,has-rstcr; + }; + + mpic: pic@40000 { + clock-frequency = <0>; + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <0x40000 0x40000>; + compatible = "chrp,open-pic"; + device_type = "open-pic"; + big-endian; + }; + + msi@41600 { + compatible = "fsl,mpc8536-msi", "fsl,mpic-msi"; + reg = <0x41600 0x80>; + msi-available-ranges = <0 0x100>; + interrupts = < + 0xe0 0 + 0xe1 0 + 0xe2 0 + 0xe3 0 + 0xe4 0 + 0xe5 0 + 0xe6 0 + 0xe7 0>; + interrupt-parent = <&mpic>; + }; + }; + + pci0: pci@fffe08000 { + compatible = "fsl,mpc8540-pci"; + device_type = "pci"; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; + interrupt-map = < + + /* IDSEL 0x11 J17 Slot 1 */ + 0x8800 0 0 1 &mpic 1 1 + 0x8800 0 0 2 &mpic 2 1 + 0x8800 0 0 3 &mpic 3 1 + 0x8800 0 0 4 &mpic 4 1>; + + interrupt-parent = <&mpic>; + interrupts = <24 0x2>; + bus-range = <0 0xff>; + ranges = <0x02000000 0 0xf0000000 0xc 0x00000000 0 0x10000000 + 0x01000000 0 0x00000000 0xf 0xffc00000 0 0x00010000>; + clock-frequency = <66666666>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <0xf 0xffe08000 0 0x1000>; + }; + + pci1: pcie@fffe09000 { + compatible = "fsl,mpc8548-pcie"; + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <0xf 0xffe09000 0 0x1000>; + bus-range = <0 0xff>; + ranges = <0x02000000 0 0xf8000000 0xc 0x18000000 0 0x08000000 + 0x01000000 0 0x00000000 0xf 0xffc20000 0 0x00010000>; + clock-frequency = <33333333>; + interrupt-parent = <&mpic>; + interrupts = <25 0x2>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0 0 1 &mpic 4 1 + 0000 0 0 2 &mpic 5 1 + 0000 0 0 3 &mpic 6 1 + 0000 0 0 4 &mpic 7 1 + >; + pcie@0 { + reg = <0 0 0 0 0>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + ranges = <0x02000000 0 0xf8000000 + 0x02000000 0 0xf8000000 + 0 0x08000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; + + pci2: pcie@fffe0a000 { + compatible = "fsl,mpc8548-pcie"; + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <0xf 0xffe0a000 0 0x1000>; + bus-range = <0 0xff>; + ranges = <0x02000000 0 0xf8000000 0xc 0x10000000 0 0x08000000 + 0x01000000 0 0x00000000 0xf 0xffc10000 0 0x00010000>; + clock-frequency = <33333333>; + interrupt-parent = <&mpic>; + interrupts = <26 0x2>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0 0 1 &mpic 0 1 + 0000 0 0 2 &mpic 1 1 + 0000 0 0 3 &mpic 2 1 + 0000 0 0 4 &mpic 3 1 + >; + pcie@0 { + reg = <0 0 0 0 0>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + ranges = <0x02000000 0 0xf8000000 + 0x02000000 0 0xf8000000 + 0 0x08000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; + + pci3: pcie@fffe0b000 { + compatible = "fsl,mpc8548-pcie"; + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <0xf 0xffe0b000 0 0x1000>; + bus-range = <0 0xff>; + ranges = <0x02000000 0 0xe0000000 0xc 0x20000000 0 0x20000000 + 0x01000000 0 0x00000000 0xf 0xffc30000 0 0x00010000>; + clock-frequency = <33333333>; + interrupt-parent = <&mpic>; + interrupts = <27 0x2>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0 0 1 &mpic 8 1 + 0000 0 0 2 &mpic 9 1 + 0000 0 0 3 &mpic 10 1 + 0000 0 0 4 &mpic 11 1 + >; + + pcie@0 { + reg = <0 0 0 0 0>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + ranges = <0x02000000 0 0xe0000000 + 0x02000000 0 0xe0000000 + 0 0x20000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00100000>; + }; + }; +}; -- cgit v1.2.3-70-g09d2 From 8dcd038a13b8e322c49fe0d3e31a0deaba4fd5fd Mon Sep 17 00:00:00 2001 From: Roel Kluin Date: Thu, 6 Aug 2009 16:00:37 -0700 Subject: powerpc/fsl-booke: read buffer overflow cam[tlbcam_index] is checked before tlbcam_index < ARRAY_SIZE(cam) Signed-off-by: Roel Kluin Signed-off-by: Andrew Morton Signed-off-by: Kumar Gala Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/mm/fsl_booke_mmu.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/powerpc/mm/fsl_booke_mmu.c b/arch/powerpc/mm/fsl_booke_mmu.c index bb3d65998e6..dc93e95b256 100644 --- a/arch/powerpc/mm/fsl_booke_mmu.c +++ b/arch/powerpc/mm/fsl_booke_mmu.c @@ -161,7 +161,7 @@ unsigned long __init mmu_mapin_ram(void) unsigned long virt = PAGE_OFFSET; phys_addr_t phys = memstart_addr; - while (cam[tlbcam_index] && tlbcam_index < ARRAY_SIZE(cam)) { + while (tlbcam_index < ARRAY_SIZE(cam) && cam[tlbcam_index]) { settlbcam(tlbcam_index, virt, phys, cam[tlbcam_index], PAGE_KERNEL_X, 0); virt += cam[tlbcam_index]; phys += cam[tlbcam_index]; -- cgit v1.2.3-70-g09d2 From 6c75933c00049bee59562a18843a4f133ec2bfe4 Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Fri, 7 Aug 2009 09:00:34 +0200 Subject: powerpc/fsl_rio: Add kmalloc NULL tests Check that the result of kmalloc/kzalloc is not NULL before dereferencing it. The semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // @@ expression *x; identifier f; constant char *C; @@ x = \(kmalloc\|kcalloc\|kzalloc\)(...); ... when != x == NULL when != x != NULL when != (x || ...) ( kfree(x) | f(...,C,...,x,...) | *f(...,x,...) | *x->f ) // Signed-off-by: Julia Lawall Signed-off-by: Kumar Gala Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/sysdev/fsl_rio.c | 18 ++++++++++++++---- 1 file changed, 14 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/sysdev/fsl_rio.c b/arch/powerpc/sysdev/fsl_rio.c index cbb3bed75d3..757a83fe5e5 100644 --- a/arch/powerpc/sysdev/fsl_rio.c +++ b/arch/powerpc/sysdev/fsl_rio.c @@ -1057,6 +1057,10 @@ int fsl_rio_setup(struct of_device *dev) law_start, law_size); ops = kmalloc(sizeof(struct rio_ops), GFP_KERNEL); + if (!ops) { + rc = -ENOMEM; + goto err_ops; + } ops->lcread = fsl_local_config_read; ops->lcwrite = fsl_local_config_write; ops->cread = fsl_rio_config_read; @@ -1064,6 +1068,10 @@ int fsl_rio_setup(struct of_device *dev) ops->dsend = fsl_rio_doorbell_send; port = kzalloc(sizeof(struct rio_mport), GFP_KERNEL); + if (!port) { + rc = -ENOMEM; + goto err_port; + } port->id = 0; port->index = 0; @@ -1071,7 +1079,7 @@ int fsl_rio_setup(struct of_device *dev) if (!priv) { printk(KERN_ERR "Can't alloc memory for 'priv'\n"); rc = -ENOMEM; - goto err; + goto err_priv; } INIT_LIST_HEAD(&port->dbells); @@ -1169,11 +1177,13 @@ int fsl_rio_setup(struct of_device *dev) return 0; err: - if (priv) - iounmap(priv->regs_win); - kfree(ops); + iounmap(priv->regs_win); kfree(priv); +err_priv: kfree(port); +err_port: + kfree(ops); +err_ops: return rc; } -- cgit v1.2.3-70-g09d2 From 8640d3bf71fa0f25adf86527fe69a32372427d4b Mon Sep 17 00:00:00 2001 From: Sebastian Andrzej Siewior Date: Wed, 5 Aug 2009 21:41:12 +0200 Subject: powerpc/ipic: unmask all interrupt sources in case the interrupt controller was used in an earlier life then it is possible it is that some of its sources were used and are still unmask. If the (unmasked) device is active and is creating interrupts (or one interrupts was pending since the interrupts were disabled) then the boot process "ends" very soon. Once external interrupts are enabled, we land in -> do_IRQ -> call ppc_md.get_irq() -> ipic_read() gets the source number -> irq_linear_revmap(source) -> revmap[source] == NO_IRQ -> irq_find_mapping(source) returns NO_IRQ because no source is registered -> source is NO_IRQ, ppc_spurious_interrupts gets incremented, no further action. Signed-off-by: Sebastian Andrzej Siewior Signed-off-by: Kumar Gala Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/sysdev/ipic.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'arch') diff --git a/arch/powerpc/sysdev/ipic.c b/arch/powerpc/sysdev/ipic.c index 69e2630c906..ebb7e584401 100644 --- a/arch/powerpc/sysdev/ipic.c +++ b/arch/powerpc/sysdev/ipic.c @@ -781,6 +781,9 @@ struct ipic * __init ipic_init(struct device_node *node, unsigned int flags) primary_ipic = ipic; irq_set_default_host(primary_ipic->irqhost); + ipic_write(ipic->regs, IPIC_SIMSR_H, 0); + ipic_write(ipic->regs, IPIC_SIMSR_L, 0); + printk ("IPIC (%d IRQ sources) at %p\n", NR_IPIC_INTS, primary_ipic->regs); -- cgit v1.2.3-70-g09d2 From 9239c89bc9c51c412b89eb8040077eaaee361326 Mon Sep 17 00:00:00 2001 From: Heiko Schocher Date: Mon, 3 Aug 2009 09:34:50 +0200 Subject: powerpc/82xx: mgcoge - updates for 2.6.32 - add I2C support - add FCC1 and FCC2 support - fix bogus gpio numbering in plattform code Signed-off-by: Heiko Schocher Signed-off-by: Kumar Gala Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/boot/dts/mgcoge.dts | 53 +++++++++++++++++++++++++++ arch/powerpc/platforms/82xx/mgcoge.c | 69 +++++++++++++++++++++++++++++++----- 2 files changed, 113 insertions(+), 9 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/boot/dts/mgcoge.dts b/arch/powerpc/boot/dts/mgcoge.dts index 633255a9755..0ce96644176 100644 --- a/arch/powerpc/boot/dts/mgcoge.dts +++ b/arch/powerpc/boot/dts/mgcoge.dts @@ -162,6 +162,59 @@ fixed-link = <0 0 10 0 0>; }; + i2c@11860 { + compatible = "fsl,mpc8272-i2c", + "fsl,cpm2-i2c"; + reg = <0x11860 0x20 0x8afc 0x2>; + interrupts = <1 8>; + interrupt-parent = <&PIC>; + fsl,cpm-command = <0x29600000>; + #address-cells = <1>; + #size-cells = <0>; + }; + + mdio@10d40 { + compatible = "fsl,cpm2-mdio-bitbang"; + reg = <0x10d00 0x14>; + #address-cells = <1>; + #size-cells = <0>; + fsl,mdio-pin = <12>; + fsl,mdc-pin = <13>; + + phy0: ethernet-phy@0 { + reg = <0x0>; + }; + + phy1: ethernet-phy@1 { + reg = <0x1>; + }; + }; + + /* FCC1 management to switch */ + ethernet@11300 { + device_type = "network"; + compatible = "fsl,cpm2-fcc-enet"; + reg = <0x11300 0x20 0x8400 0x100 0x11390 0x1>; + local-mac-address = [ 00 01 02 03 04 07 ]; + interrupts = <32 8>; + interrupt-parent = <&PIC>; + phy-handle = <&phy0>; + linux,network-index = <1>; + fsl,cpm-command = <0x12000300>; + }; + + /* FCC2 to redundant core unit over backplane */ + ethernet@11320 { + device_type = "network"; + compatible = "fsl,cpm2-fcc-enet"; + reg = <0x11320 0x20 0x8500 0x100 0x113b0 0x1>; + local-mac-address = [ 00 01 02 03 04 08 ]; + interrupts = <33 8>; + interrupt-parent = <&PIC>; + phy-handle = <&phy1>; + linux,network-index = <2>; + fsl,cpm-command = <0x16200300>; + }; }; PIC: interrupt-controller@10c00 { diff --git a/arch/powerpc/platforms/82xx/mgcoge.c b/arch/powerpc/platforms/82xx/mgcoge.c index c2af169c1d1..7a5de9eb3c7 100644 --- a/arch/powerpc/platforms/82xx/mgcoge.c +++ b/arch/powerpc/platforms/82xx/mgcoge.c @@ -50,16 +50,63 @@ struct cpm_pin { static __initdata struct cpm_pin mgcoge_pins[] = { /* SMC2 */ - {1, 8, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, - {1, 9, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, + {0, 8, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, + {0, 9, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, /* SCC4 */ - {3, 25, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, - {3, 24, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, - {3, 9, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, - {3, 8, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, - {4, 22, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, - {4, 21, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, + {2, 25, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, + {2, 24, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, + {2, 9, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, + {2, 8, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, + {3, 22, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, + {3, 21, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, + + /* FCC1 */ + {0, 14, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, + {0, 15, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, + {0, 16, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, + {0, 17, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, + {0, 18, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, + {0, 19, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, + {0, 20, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, + {0, 21, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, + {0, 26, CPM_PIN_INPUT | CPM_PIN_SECONDARY}, + {0, 27, CPM_PIN_INPUT | CPM_PIN_SECONDARY}, + {0, 28, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY}, + {0, 29, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY}, + {0, 30, CPM_PIN_INPUT | CPM_PIN_SECONDARY}, + {0, 31, CPM_PIN_INPUT | CPM_PIN_SECONDARY}, + + {2, 22, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, + {2, 23, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, + + /* FCC2 */ + {1, 18, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, + {1, 19, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, + {1, 20, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, + {1, 21, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, + {1, 22, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, + {1, 23, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, + {1, 24, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, + {1, 25, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, + {1, 26, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, + {1, 27, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, + {1, 28, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, + {1, 29, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY}, + {1, 30, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, + {1, 31, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, + + {2, 18, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, + {2, 19, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, + + /* MDC */ + {0, 13, CPM_PIN_OUTPUT | CPM_PIN_GPIO}, + +#if defined(CONFIG_I2C_CPM) + /* I2C */ + {3, 14, CPM_PIN_INPUT | CPM_PIN_SECONDARY | CPM_PIN_OPENDRAIN}, + {3, 15, CPM_PIN_INPUT | CPM_PIN_SECONDARY | CPM_PIN_OPENDRAIN}, +#endif }; static void __init init_ioports(void) @@ -68,12 +115,16 @@ static void __init init_ioports(void) for (i = 0; i < ARRAY_SIZE(mgcoge_pins); i++) { const struct cpm_pin *pin = &mgcoge_pins[i]; - cpm2_set_pin(pin->port - 1, pin->pin, pin->flags); + cpm2_set_pin(pin->port, pin->pin, pin->flags); } cpm2_smc_clk_setup(CPM_CLK_SMC2, CPM_BRG8); cpm2_clk_setup(CPM_CLK_SCC4, CPM_CLK7, CPM_CLK_RX); cpm2_clk_setup(CPM_CLK_SCC4, CPM_CLK8, CPM_CLK_TX); + cpm2_clk_setup(CPM_CLK_FCC1, CPM_CLK10, CPM_CLK_RX); + cpm2_clk_setup(CPM_CLK_FCC1, CPM_CLK9, CPM_CLK_TX); + cpm2_clk_setup(CPM_CLK_FCC2, CPM_CLK13, CPM_CLK_RX); + cpm2_clk_setup(CPM_CLK_FCC2, CPM_CLK14, CPM_CLK_TX); } static void __init mgcoge_setup_arch(void) -- cgit v1.2.3-70-g09d2 From 7a626b66bbd17e775cf2210e560b29383110290e Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Sun, 2 Aug 2009 10:44:53 +0200 Subject: powerpc/ipic: introduce missing kfree Error handling code following a kzalloc should free the allocated data. The semantic match that finds the problem is as follows: (http://www.emn.fr/x-info/coccinelle/) // @r exists@ local idexpression x; statement S; expression E; identifier f,f1,l; position p1,p2; expression *ptr != NULL; @@ x@p1 = \(kmalloc\|kzalloc\|kcalloc\)(...); ... if (x == NULL) S <... when != x when != if (...) { <+...x...+> } ( x->f1 = E | (x->f1 == NULL || ...) | f(...,x->f1,...) ) ...> ( return \(0\|<+...x...+>\|ptr\); | return@p2 ...; ) @script:python@ p1 << r.p1; p2 << r.p2; @@ print "* file: %s kmalloc %s return %s" % (p1[0].file,p1[0].line,p2[0].line) // Signed-off-by: Julia Lawall Signed-off-by: Kumar Gala Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/sysdev/ipic.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/powerpc/sysdev/ipic.c b/arch/powerpc/sysdev/ipic.c index ebb7e584401..cb7689c4bfb 100644 --- a/arch/powerpc/sysdev/ipic.c +++ b/arch/powerpc/sysdev/ipic.c @@ -735,8 +735,10 @@ struct ipic * __init ipic_init(struct device_node *node, unsigned int flags) ipic->irqhost = irq_alloc_host(node, IRQ_HOST_MAP_LINEAR, NR_IPIC_INTS, &ipic_host_ops, 0); - if (ipic->irqhost == NULL) + if (ipic->irqhost == NULL) { + kfree(ipic); return NULL; + } ipic->regs = ioremap(res.start, res.end - res.start + 1); -- cgit v1.2.3-70-g09d2 From 3475dd8a68a7c705bee88b143422ba02cb9a796b Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Sat, 1 Aug 2009 10:52:51 +0200 Subject: powerpc/qe: introduce missing kfree Error handling code following a kzalloc should free the allocated data. The semantic match that finds the problem is as follows: (http://www.emn.fr/x-info/coccinelle/) // @r exists@ local idexpression x; statement S; expression E; identifier f,f1,l; position p1,p2; expression *ptr != NULL; @@ x@p1 = \(kmalloc\|kzalloc\|kcalloc\)(...); ... if (x == NULL) S <... when != x when != if (...) { <+...x...+> } ( x->f1 = E | (x->f1 == NULL || ...) | f(...,x->f1,...) ) ...> ( return \(0\|<+...x...+>\|ptr\); | return@p2 ...; ) @script:python@ p1 << r.p1; p2 << r.p2; @@ print "* file: %s kmalloc %s return %s" % (p1[0].file,p1[0].line,p2[0].line) // Signed-off-by: Julia Lawall Acked-by: Timur Tabi Signed-off-by: Kumar Gala Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/sysdev/qe_lib/qe_ic.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/powerpc/sysdev/qe_lib/qe_ic.c b/arch/powerpc/sysdev/qe_lib/qe_ic.c index 074905c3ee5..3faa42e03a8 100644 --- a/arch/powerpc/sysdev/qe_lib/qe_ic.c +++ b/arch/powerpc/sysdev/qe_lib/qe_ic.c @@ -339,8 +339,10 @@ void __init qe_ic_init(struct device_node *node, unsigned int flags, qe_ic->irqhost = irq_alloc_host(node, IRQ_HOST_MAP_LINEAR, NR_QE_IC_INTS, &qe_ic_host_ops, 0); - if (qe_ic->irqhost == NULL) + if (qe_ic->irqhost == NULL) { + kfree(qe_ic); return; + } qe_ic->regs = ioremap(res.start, res.end - res.start + 1); @@ -352,6 +354,7 @@ void __init qe_ic_init(struct device_node *node, unsigned int flags, if (qe_ic->virq_low == NO_IRQ) { printk(KERN_ERR "Failed to map QE_IC low IRQ\n"); + kfree(qe_ic); return; } -- cgit v1.2.3-70-g09d2 From fda4bd9bac78efd2f9d566c52956d297bc03e8d9 Mon Sep 17 00:00:00 2001 From: Anton Vorontsov Date: Sat, 25 Jul 2009 01:42:17 +0400 Subject: powerpc/83xx: Add support for MPC8377E-WLAN boards MPC8377E-WLAN are basically RDB boards except: - RAM extended to 512 MB; - NAND flash removed, NOR flash extended to 64 MB; - Vitesse VSC7385 5-port switch removed, RTL8211B PHY added; - Power management MCU removed; - PCI slot removed, another mini-PCI slot added (IRQ routing changed); - USB3300 PHY's ID pin grounded, thus USB port is host-only. Signed-off-by: Anton Vorontsov Signed-off-by: Kumar Gala Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/boot/dts/mpc8377_wlan.dts | 464 ++++++++++++++++++++++++++++++ arch/powerpc/platforms/83xx/Kconfig | 4 +- arch/powerpc/platforms/83xx/mpc837x_rdb.c | 5 +- 3 files changed, 469 insertions(+), 4 deletions(-) create mode 100644 arch/powerpc/boot/dts/mpc8377_wlan.dts (limited to 'arch') diff --git a/arch/powerpc/boot/dts/mpc8377_wlan.dts b/arch/powerpc/boot/dts/mpc8377_wlan.dts new file mode 100644 index 00000000000..3febc4e91b1 --- /dev/null +++ b/arch/powerpc/boot/dts/mpc8377_wlan.dts @@ -0,0 +1,464 @@ +/* + * MPC8377E WLAN Device Tree Source + * + * Copyright 2007-2009 Freescale Semiconductor Inc. + * Copyright 2009 MontaVista Software, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/dts-v1/; + +/ { + compatible = "fsl,mpc8377wlan"; + #address-cells = <1>; + #size-cells = <1>; + + aliases { + ethernet0 = &enet0; + ethernet1 = &enet1; + serial0 = &serial0; + serial1 = &serial1; + pci0 = &pci0; + pci1 = &pci1; + pci2 = &pci2; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,8377@0 { + device_type = "cpu"; + reg = <0x0>; + d-cache-line-size = <32>; + i-cache-line-size = <32>; + d-cache-size = <32768>; + i-cache-size = <32768>; + timebase-frequency = <0>; + bus-frequency = <0>; + clock-frequency = <0>; + }; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x20000000>; // 512MB at 0 + }; + + localbus@e0005000 { + #address-cells = <2>; + #size-cells = <1>; + compatible = "fsl,mpc8377-elbc", "fsl,elbc", "simple-bus"; + reg = <0xe0005000 0x1000>; + interrupts = <77 0x8>; + interrupt-parent = <&ipic>; + ranges = <0x0 0x0 0xfc000000 0x04000000>; + + flash@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0x0 0x0 0x4000000>; + bank-width = <2>; + device-width = <1>; + + partition@0 { + reg = <0 0x8000>; + label = "u-boot"; + read-only; + }; + + partition@a0000 { + reg = <0xa0000 0x300000>; + label = "kernel"; + }; + + partition@3a0000 { + reg = <0x3a0000 0x3c60000>; + label = "rootfs"; + }; + }; + }; + + immr@e0000000 { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + compatible = "simple-bus"; + ranges = <0x0 0xe0000000 0x00100000>; + reg = <0xe0000000 0x00000200>; + bus-frequency = <0>; + + wdt@200 { + device_type = "watchdog"; + compatible = "mpc83xx_wdt"; + reg = <0x200 0x100>; + }; + + gpio1: gpio-controller@c00 { + #gpio-cells = <2>; + compatible = "fsl,mpc8377-gpio", "fsl,mpc8349-gpio"; + reg = <0xc00 0x100>; + interrupts = <74 0x8>; + interrupt-parent = <&ipic>; + gpio-controller; + }; + + gpio2: gpio-controller@d00 { + #gpio-cells = <2>; + compatible = "fsl,mpc8377-gpio", "fsl,mpc8349-gpio"; + reg = <0xd00 0x100>; + interrupts = <75 0x8>; + interrupt-parent = <&ipic>; + gpio-controller; + }; + + sleep-nexus { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + sleep = <&pmc 0x0c000000>; + ranges; + + i2c@3000 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; + compatible = "fsl-i2c"; + reg = <0x3000 0x100>; + interrupts = <14 0x8>; + interrupt-parent = <&ipic>; + dfsrr; + + at24@50 { + compatible = "at24,24c256"; + reg = <0x50>; + }; + + rtc@68 { + compatible = "dallas,ds1339"; + reg = <0x68>; + }; + }; + + sdhci@2e000 { + compatible = "fsl,mpc8377-esdhc", "fsl,esdhc"; + reg = <0x2e000 0x1000>; + interrupts = <42 0x8>; + interrupt-parent = <&ipic>; + clock-frequency = <133333333>; + }; + }; + + i2c@3100 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <1>; + compatible = "fsl-i2c"; + reg = <0x3100 0x100>; + interrupts = <15 0x8>; + interrupt-parent = <&ipic>; + dfsrr; + }; + + spi@7000 { + cell-index = <0>; + compatible = "fsl,spi"; + reg = <0x7000 0x1000>; + interrupts = <16 0x8>; + interrupt-parent = <&ipic>; + mode = "cpu"; + }; + + dma@82a8 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8377-dma", "fsl,elo-dma"; + reg = <0x82a8 4>; + ranges = <0 0x8100 0x1a8>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + cell-index = <0>; + dma-channel@0 { + compatible = "fsl,mpc8377-dma-channel", "fsl,elo-dma-channel"; + reg = <0 0x80>; + cell-index = <0>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + }; + dma-channel@80 { + compatible = "fsl,mpc8377-dma-channel", "fsl,elo-dma-channel"; + reg = <0x80 0x80>; + cell-index = <1>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + }; + dma-channel@100 { + compatible = "fsl,mpc8377-dma-channel", "fsl,elo-dma-channel"; + reg = <0x100 0x80>; + cell-index = <2>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + }; + dma-channel@180 { + compatible = "fsl,mpc8377-dma-channel", "fsl,elo-dma-channel"; + reg = <0x180 0x28>; + cell-index = <3>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + }; + }; + + usb@23000 { + compatible = "fsl-usb2-dr"; + reg = <0x23000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupt-parent = <&ipic>; + interrupts = <38 0x8>; + phy_type = "ulpi"; + sleep = <&pmc 0x00c00000>; + }; + + enet0: ethernet@24000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <0>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <0x24000 0x1000>; + ranges = <0x0 0x24000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <32 0x8 33 0x8 34 0x8>; + phy-connection-type = "mii"; + interrupt-parent = <&ipic>; + tbi-handle = <&tbi0>; + phy-handle = <&phy2>; + sleep = <&pmc 0xc0000000>; + fsl,magic-packet; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-mdio"; + reg = <0x520 0x20>; + + phy2: ethernet-phy@2 { + interrupt-parent = <&ipic>; + interrupts = <17 0x8>; + reg = <0x2>; + device_type = "ethernet-phy"; + }; + + phy3: ethernet-phy@3 { + interrupt-parent = <&ipic>; + interrupts = <18 0x8>; + reg = <0x3>; + device_type = "ethernet-phy"; + }; + + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + }; + + enet1: ethernet@25000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <1>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <0x25000 0x1000>; + ranges = <0x0 0x25000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <35 0x8 36 0x8 37 0x8>; + phy-connection-type = "mii"; + interrupt-parent = <&ipic>; + phy-handle = <&phy3>; + tbi-handle = <&tbi1>; + sleep = <&pmc 0x30000000>; + fsl,magic-packet; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x520 0x20>; + + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + }; + + serial0: serial@4500 { + cell-index = <0>; + device_type = "serial"; + compatible = "ns16550"; + reg = <0x4500 0x100>; + clock-frequency = <0>; + interrupts = <9 0x8>; + interrupt-parent = <&ipic>; + }; + + serial1: serial@4600 { + cell-index = <1>; + device_type = "serial"; + compatible = "ns16550"; + reg = <0x4600 0x100>; + clock-frequency = <0>; + interrupts = <10 0x8>; + interrupt-parent = <&ipic>; + }; + + crypto@30000 { + compatible = "fsl,sec3.0", "fsl,sec2.4", "fsl,sec2.2", + "fsl,sec2.1", "fsl,sec2.0"; + reg = <0x30000 0x10000>; + interrupts = <11 0x8>; + interrupt-parent = <&ipic>; + fsl,num-channels = <4>; + fsl,channel-fifo-len = <24>; + fsl,exec-units-mask = <0x9fe>; + fsl,descriptor-types-mask = <0x3ab0ebf>; + sleep = <&pmc 0x03000000>; + }; + + sata@18000 { + compatible = "fsl,mpc8377-sata", "fsl,pq-sata"; + reg = <0x18000 0x1000>; + interrupts = <44 0x8>; + interrupt-parent = <&ipic>; + sleep = <&pmc 0x000000c0>; + }; + + sata@19000 { + compatible = "fsl,mpc8377-sata", "fsl,pq-sata"; + reg = <0x19000 0x1000>; + interrupts = <45 0x8>; + interrupt-parent = <&ipic>; + sleep = <&pmc 0x00000030>; + }; + + /* IPIC + * interrupts cell = + * sense values match linux IORESOURCE_IRQ_* defines: + * sense == 8: Level, low assertion + * sense == 2: Edge, high-to-low change + */ + ipic: interrupt-controller@700 { + compatible = "fsl,ipic"; + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <0x700 0x100>; + }; + + pmc: power@b00 { + compatible = "fsl,mpc8377-pmc", "fsl,mpc8349-pmc"; + reg = <0xb00 0x100 0xa00 0x100>; + interrupts = <80 0x8>; + interrupt-parent = <&ipic>; + }; + }; + + pci0: pci@e0008500 { + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IRQ5 = 21 = 0x15, IRQ6 = 0x16, IRQ7 = 23 = 0x17 */ + + /* IDSEL AD14 IRQ6 inta */ + 0x7000 0x0 0x0 0x1 &ipic 22 0x8 + + /* IDSEL AD15 IRQ5 inta */ + 0x7800 0x0 0x0 0x1 &ipic 21 0x8>; + interrupt-parent = <&ipic>; + interrupts = <66 0x8>; + bus-range = <0 0>; + ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000 + 0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000 + 0x01000000 0x0 0x00000000 0xe0300000 0x0 0x00100000>; + sleep = <&pmc 0x00010000>; + clock-frequency = <66666666>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <0xe0008500 0x100 /* internal registers */ + 0xe0008300 0x8>; /* config space access registers */ + compatible = "fsl,mpc8349-pci"; + device_type = "pci"; + }; + + pci1: pcie@e0009000 { + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + device_type = "pci"; + compatible = "fsl,mpc8377-pcie", "fsl,mpc8314-pcie"; + reg = <0xe0009000 0x00001000>; + ranges = <0x02000000 0 0xa8000000 0xa8000000 0 0x10000000 + 0x01000000 0 0x00000000 0xb8000000 0 0x00800000>; + bus-range = <0 255>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = <0 0 0 1 &ipic 1 8 + 0 0 0 2 &ipic 1 8 + 0 0 0 3 &ipic 1 8 + 0 0 0 4 &ipic 1 8>; + sleep = <&pmc 0x00300000>; + clock-frequency = <0>; + + pcie@0 { + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + reg = <0 0 0 0 0>; + ranges = <0x02000000 0 0xa8000000 + 0x02000000 0 0xa8000000 + 0 0x10000000 + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00800000>; + }; + }; + + pci2: pcie@e000a000 { + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + device_type = "pci"; + compatible = "fsl,mpc8377-pcie", "fsl,mpc8314-pcie"; + reg = <0xe000a000 0x00001000>; + ranges = <0x02000000 0 0xc8000000 0xc8000000 0 0x10000000 + 0x01000000 0 0x00000000 0xd8000000 0 0x00800000>; + bus-range = <0 255>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = <0 0 0 1 &ipic 2 8 + 0 0 0 2 &ipic 2 8 + 0 0 0 3 &ipic 2 8 + 0 0 0 4 &ipic 2 8>; + sleep = <&pmc 0x000c0000>; + clock-frequency = <0>; + + pcie@0 { + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + reg = <0 0 0 0 0>; + ranges = <0x02000000 0 0xc8000000 + 0x02000000 0 0xc8000000 + 0 0x10000000 + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00800000>; + }; + }; +}; diff --git a/arch/powerpc/platforms/83xx/Kconfig b/arch/powerpc/platforms/83xx/Kconfig index 083ebee9a16..f49a2548c5f 100644 --- a/arch/powerpc/platforms/83xx/Kconfig +++ b/arch/powerpc/platforms/83xx/Kconfig @@ -75,11 +75,11 @@ config MPC837x_MDS This option enables support for the MPC837x MDS Processor Board. config MPC837x_RDB - bool "Freescale MPC837x RDB" + bool "Freescale MPC837x RDB/WLAN" select DEFAULT_UIMAGE select PPC_MPC837x help - This option enables support for the MPC837x RDB Board. + This option enables support for the MPC837x RDB and WLAN Boards. config SBC834x bool "Wind River SBC834x" diff --git a/arch/powerpc/platforms/83xx/mpc837x_rdb.c b/arch/powerpc/platforms/83xx/mpc837x_rdb.c index 76f3b32a155..91d19ab3a79 100644 --- a/arch/powerpc/platforms/83xx/mpc837x_rdb.c +++ b/arch/powerpc/platforms/83xx/mpc837x_rdb.c @@ -86,11 +86,12 @@ static int __init mpc837x_rdb_probe(void) return of_flat_dt_is_compatible(root, "fsl,mpc8377rdb") || of_flat_dt_is_compatible(root, "fsl,mpc8378rdb") || - of_flat_dt_is_compatible(root, "fsl,mpc8379rdb"); + of_flat_dt_is_compatible(root, "fsl,mpc8379rdb") || + of_flat_dt_is_compatible(root, "fsl,mpc8377wlan"); } define_machine(mpc837x_rdb) { - .name = "MPC837x RDB", + .name = "MPC837x RDB/WLAN", .probe = mpc837x_rdb_probe, .setup_arch = mpc837x_rdb_setup_arch, .init_IRQ = mpc837x_rdb_init_IRQ, -- cgit v1.2.3-70-g09d2 From c69328d4b93e6885c897155fbacac69a12c5faef Mon Sep 17 00:00:00 2001 From: Anton Vorontsov Date: Thu, 9 Jul 2009 22:36:44 +0400 Subject: powerpc/85xx: Add support for I2C EEPROMs on MPC8548CDS boards This patch simply adds four eeprom nodes to MPC8548CDS' device tree. Signed-off-by: Anton Vorontsov Signed-off-by: Kumar Gala Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/boot/dts/mpc8548cds.dts | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) (limited to 'arch') diff --git a/arch/powerpc/boot/dts/mpc8548cds.dts b/arch/powerpc/boot/dts/mpc8548cds.dts index 475be1433fe..4173af387c6 100644 --- a/arch/powerpc/boot/dts/mpc8548cds.dts +++ b/arch/powerpc/boot/dts/mpc8548cds.dts @@ -100,6 +100,21 @@ interrupts = <43 2>; interrupt-parent = <&mpic>; dfsrr; + + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; + + eeprom@56 { + compatible = "atmel,24c64"; + reg = <0x56>; + }; + + eeprom@57 { + compatible = "atmel,24c64"; + reg = <0x57>; + }; }; i2c@3100 { @@ -111,6 +126,11 @@ interrupts = <43 2>; interrupt-parent = <&mpic>; dfsrr; + + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; }; dma@21300 { -- cgit v1.2.3-70-g09d2 From 89f3729642cf33bfbc742b85e134936b562f9731 Mon Sep 17 00:00:00 2001 From: Anton Vorontsov Date: Sat, 25 Jul 2009 01:42:30 +0400 Subject: powerpc/83xx: Add eSDHC support for MPC837xE-RDB/WLAN boards Actually, the support is already there, but it requires newer U-Boots (to fill-in clock-frequency, and setup pin multiplexing). Though, it appears that on RDB boards USBB pins aren't multiplexed between USB and eSDHC (unlike MDS boards, where USB and eSDHC share pctl and pwrfault pins). So, for RDB boards we can safely setup pinmux and manually fill-in clock-frequency, thus making eSDHC work even with older u-boots. Signed-off-by: Anton Vorontsov Signed-off-by: Kumar Gala Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/boot/dts/mpc8377_rdb.dts | 2 +- arch/powerpc/boot/dts/mpc8378_rdb.dts | 2 +- arch/powerpc/boot/dts/mpc8379_rdb.dts | 2 +- arch/powerpc/platforms/83xx/mpc837x_rdb.c | 23 +++++++++++++++++++++++ arch/powerpc/platforms/83xx/mpc83xx.h | 4 ++++ 5 files changed, 30 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/boot/dts/mpc8377_rdb.dts b/arch/powerpc/boot/dts/mpc8377_rdb.dts index 4f06dbc0d27..28e022ac417 100644 --- a/arch/powerpc/boot/dts/mpc8377_rdb.dts +++ b/arch/powerpc/boot/dts/mpc8377_rdb.dts @@ -174,7 +174,7 @@ interrupts = <42 0x8>; interrupt-parent = <&ipic>; /* Filled in by U-Boot */ - clock-frequency = <0>; + clock-frequency = <111111111>; }; }; diff --git a/arch/powerpc/boot/dts/mpc8378_rdb.dts b/arch/powerpc/boot/dts/mpc8378_rdb.dts index aabf3437cad..a11ead8214b 100644 --- a/arch/powerpc/boot/dts/mpc8378_rdb.dts +++ b/arch/powerpc/boot/dts/mpc8378_rdb.dts @@ -174,7 +174,7 @@ interrupts = <42 0x8>; interrupt-parent = <&ipic>; /* Filled in by U-Boot */ - clock-frequency = <0>; + clock-frequency = <111111111>; }; }; diff --git a/arch/powerpc/boot/dts/mpc8379_rdb.dts b/arch/powerpc/boot/dts/mpc8379_rdb.dts index 9b1da864d89..e35dfba587c 100644 --- a/arch/powerpc/boot/dts/mpc8379_rdb.dts +++ b/arch/powerpc/boot/dts/mpc8379_rdb.dts @@ -172,7 +172,7 @@ interrupts = <42 0x8>; interrupt-parent = <&ipic>; /* Filled in by U-Boot */ - clock-frequency = <0>; + clock-frequency = <111111111>; }; }; diff --git a/arch/powerpc/platforms/83xx/mpc837x_rdb.c b/arch/powerpc/platforms/83xx/mpc837x_rdb.c index 91d19ab3a79..a1908d26124 100644 --- a/arch/powerpc/platforms/83xx/mpc837x_rdb.c +++ b/arch/powerpc/platforms/83xx/mpc837x_rdb.c @@ -17,10 +17,32 @@ #include #include #include +#include #include #include "mpc83xx.h" +static void mpc837x_rdb_sd_cfg(void) +{ + void __iomem *im; + + im = ioremap(get_immrbase(), 0x1000); + if (!im) { + WARN_ON(1); + return; + } + + /* + * On RDB boards (in contrast to MDS) USBB pins are used for SD only, + * so we can safely mux them away from the USB block. + */ + clrsetbits_be32(im + MPC83XX_SICRL_OFFS, MPC837X_SICRL_USBB_MASK, + MPC837X_SICRL_SD); + clrsetbits_be32(im + MPC83XX_SICRH_OFFS, MPC837X_SICRH_SPI_MASK, + MPC837X_SICRH_SD); + iounmap(im); +} + /* ************************************************************************ * * Setup the architecture @@ -42,6 +64,7 @@ static void __init mpc837x_rdb_setup_arch(void) mpc83xx_add_bridge(np); #endif mpc837x_usb_cfg(); + mpc837x_rdb_sd_cfg(); } static struct of_device_id mpc837x_ids[] = { diff --git a/arch/powerpc/platforms/83xx/mpc83xx.h b/arch/powerpc/platforms/83xx/mpc83xx.h index d1dc5b0b4fb..0fea8811d45 100644 --- a/arch/powerpc/platforms/83xx/mpc83xx.h +++ b/arch/powerpc/platforms/83xx/mpc83xx.h @@ -30,6 +30,8 @@ #define MPC8315_SICRL_USB_ULPI 0x00000054 #define MPC837X_SICRL_USB_MASK 0xf0000000 #define MPC837X_SICRL_USB_ULPI 0x50000000 +#define MPC837X_SICRL_USBB_MASK 0x30000000 +#define MPC837X_SICRL_SD 0x20000000 /* system i/o configuration register high */ #define MPC83XX_SICRH_OFFS 0x118 @@ -38,6 +40,8 @@ #define MPC831X_SICRH_USB_ULPI 0x000000a0 #define MPC8315_SICRH_USB_MASK 0x0000ff00 #define MPC8315_SICRH_USB_ULPI 0x00000000 +#define MPC837X_SICRH_SPI_MASK 0x00000003 +#define MPC837X_SICRH_SD 0x00000001 /* USB Control Register */ #define FSL_USB2_CONTROL_OFFS 0x500 -- cgit v1.2.3-70-g09d2 From 2eaa50e9670ecab9712317723cb7836a4da1c0dc Mon Sep 17 00:00:00 2001 From: Martyn Welch Date: Tue, 30 Jun 2009 15:32:26 +0100 Subject: powerpc/86xx: Correct reading of information presented in cpuinfo /proc/cpuinfo should be showing the boards revision and the revision of the FPGA fitted. The functions currently used to access this information as incorrect. Additionally the VME geographical address of the PPC9A and it's status as system contoller are available in the board registers. Show these in cpuinfo. Signed-off-by: Martyn Welch Signed-off-by: Kumar Gala Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/platforms/86xx/gef_ppc9a.c | 37 ++++++++++++++++++++++++++------- 1 file changed, 30 insertions(+), 7 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/platforms/86xx/gef_ppc9a.c b/arch/powerpc/platforms/86xx/gef_ppc9a.c index 2efa052975e..287f7bd17dd 100644 --- a/arch/powerpc/platforms/86xx/gef_ppc9a.c +++ b/arch/powerpc/platforms/86xx/gef_ppc9a.c @@ -102,8 +102,8 @@ static unsigned int gef_ppc9a_get_pcb_rev(void) { unsigned int reg; - reg = ioread32(ppc9a_regs); - return (reg >> 8) & 0xff; + reg = ioread32be(ppc9a_regs); + return (reg >> 16) & 0xff; } /* Return the board (software) revision */ @@ -111,8 +111,8 @@ static unsigned int gef_ppc9a_get_board_rev(void) { unsigned int reg; - reg = ioread32(ppc9a_regs); - return (reg >> 16) & 0xff; + reg = ioread32be(ppc9a_regs); + return (reg >> 8) & 0xff; } /* Return the FPGA revision */ @@ -120,8 +120,26 @@ static unsigned int gef_ppc9a_get_fpga_rev(void) { unsigned int reg; - reg = ioread32(ppc9a_regs); - return (reg >> 24) & 0xf; + reg = ioread32be(ppc9a_regs); + return reg & 0xf; +} + +/* Return VME Geographical Address */ +static unsigned int gef_ppc9a_get_vme_geo_addr(void) +{ + unsigned int reg; + + reg = ioread32be(ppc9a_regs + 0x4); + return reg & 0x1f; +} + +/* Return VME System Controller Status */ +static unsigned int gef_ppc9a_get_vme_is_syscon(void) +{ + unsigned int reg; + + reg = ioread32be(ppc9a_regs + 0x4); + return (reg >> 9) & 0x1; } static void gef_ppc9a_show_cpuinfo(struct seq_file *m) @@ -131,10 +149,15 @@ static void gef_ppc9a_show_cpuinfo(struct seq_file *m) seq_printf(m, "Vendor\t\t: GE Fanuc Intelligent Platforms\n"); seq_printf(m, "Revision\t: %u%c\n", gef_ppc9a_get_pcb_rev(), - ('A' + gef_ppc9a_get_board_rev() - 1)); + ('A' + gef_ppc9a_get_board_rev())); seq_printf(m, "FPGA Revision\t: %u\n", gef_ppc9a_get_fpga_rev()); seq_printf(m, "SVR\t\t: 0x%x\n", svid); + + seq_printf(m, "VME geo. addr\t: %u\n", gef_ppc9a_get_vme_geo_addr()); + + seq_printf(m, "VME syscon\t: %s\n", + gef_ppc9a_get_vme_is_syscon() ? "yes" : "no"); } static void __init gef_ppc9a_nec_fixup(struct pci_dev *pdev) -- cgit v1.2.3-70-g09d2 From 8798b9df26bbc7f3cee686483a0bac68b666bf8f Mon Sep 17 00:00:00 2001 From: Martyn Welch Date: Tue, 30 Jun 2009 15:32:38 +0100 Subject: powerpc/86xx: Enable XMC site on GE Fanuc SBC310 This patch enables the XMC (PCIe daughter card) site on the SBC310. STG enter the description for the patch above. Signed-off-by: Martyn Welch Signed-off-by: Kumar Gala Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/boot/dts/gef_sbc310.dts | 37 ++++++++++++++++++++++++++++++++++++ 1 file changed, 37 insertions(+) (limited to 'arch') diff --git a/arch/powerpc/boot/dts/gef_sbc310.dts b/arch/powerpc/boot/dts/gef_sbc310.dts index 0f4c9ec2c3a..7810ea99554 100644 --- a/arch/powerpc/boot/dts/gef_sbc310.dts +++ b/arch/powerpc/boot/dts/gef_sbc310.dts @@ -376,4 +376,41 @@ 0x0 0x00400000>; }; }; + + pci1: pcie@fef09000 { + compatible = "fsl,mpc8641-pcie"; + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <0xfef09000 0x1000>; + bus-range = <0x0 0xff>; + ranges = <0x02000000 0x0 0xc0000000 0xc0000000 0x0 0x20000000 + 0x01000000 0x0 0x00000000 0xfe400000 0x0 0x00400000>; + clock-frequency = <33333333>; + interrupt-parent = <&mpic>; + interrupts = <0x19 0x2>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; + interrupt-map = < + 0x0000 0x0 0x0 0x1 &mpic 0x4 0x2 + 0x0000 0x0 0x0 0x2 &mpic 0x5 0x2 + 0x0000 0x0 0x0 0x3 &mpic 0x6 0x2 + 0x0000 0x0 0x0 0x4 &mpic 0x7 0x2 + >; + + pcie@0 { + reg = <0 0 0 0 0>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + ranges = <0x02000000 0x0 0xc0000000 + 0x02000000 0x0 0xc0000000 + 0x0 0x20000000 + + 0x01000000 0x0 0x00000000 + 0x01000000 0x0 0x00000000 + 0x0 0x00400000>; + }; + }; + }; -- cgit v1.2.3-70-g09d2 From 433abcdf321322495d83c8b571bdf7134622c734 Mon Sep 17 00:00:00 2001 From: Martyn Welch Date: Wed, 29 Jul 2009 22:13:45 +0000 Subject: powerpc/86xx: Update GE Fanuc sbc310 DTS Update GE Fanuc DTS to match the alterations suggested during the merge of the ppc9a DTS in commit 740d36ae6344f38c4da64c2ede765d7d2dd1f132 Signed-off-by: Martyn Welch Signed-off-by: Kumar Gala Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/boot/dts/gef_sbc310.dts | 29 +++++++++++++---------------- 1 file changed, 13 insertions(+), 16 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/boot/dts/gef_sbc310.dts b/arch/powerpc/boot/dts/gef_sbc310.dts index 7810ea99554..2107d3c7cfe 100644 --- a/arch/powerpc/boot/dts/gef_sbc310.dts +++ b/arch/powerpc/boot/dts/gef_sbc310.dts @@ -83,34 +83,34 @@ /* flash@0,0 is a mirror of part of the memory in flash@1,0 flash@0,0 { - compatible = "cfi-flash"; - reg = <0 0 0x01000000>; + compatible = "gef,sbc310-firmware-mirror", "cfi-flash"; + reg = <0x0 0x0 0x01000000>; bank-width = <2>; device-width = <2>; #address-cells = <1>; #size-cells = <1>; partition@0 { label = "firmware"; - reg = <0x00000000 0x01000000>; + reg = <0x0 0x01000000>; read-only; }; }; */ flash@1,0 { - compatible = "cfi-flash"; - reg = <1 0 0x8000000>; + compatible = "gef,sbc310-paged-flash", "cfi-flash"; + reg = <0x1 0x0 0x8000000>; bank-width = <2>; device-width = <2>; #address-cells = <1>; #size-cells = <1>; partition@0 { label = "user"; - reg = <0x00000000 0x07800000>; + reg = <0x0 0x7800000>; }; partition@7800000 { label = "firmware"; - reg = <0x07800000 0x00800000>; + reg = <0x7800000 0x800000>; read-only; }; }; @@ -121,18 +121,16 @@ }; wdt@4,2000 { - #interrupt-cells = <2>; - device_type = "watchdog"; - compatible = "gef,fpga-wdt"; + compatible = "gef,sbc310-fpga-wdt", "gef,fpga-wdt-1.00", + "gef,fpga-wdt"; reg = <0x4 0x2000 0x8>; interrupts = <0x1a 0x4>; interrupt-parent = <&gef_pic>; }; /* wdt@4,2010 { - #interrupt-cells = <2>; - device_type = "watchdog"; - compatible = "gef,fpga-wdt"; + compatible = "gef,sbc310-fpga-wdt", "gef,fpga-wdt-1.00", + "gef,fpga-wdt"; reg = <0x4 0x2010 0x8>; interrupts = <0x1b 0x4>; interrupt-parent = <&gef_pic>; @@ -141,7 +139,7 @@ gef_pic: pic@4,4000 { #interrupt-cells = <1>; interrupt-controller; - compatible = "gef,fpga-pic"; + compatible = "gef,sbc310-fpga-pic", "gef,fpga-pic"; reg = <0x4 0x4000 0x20>; interrupts = <0x8 0x9>; @@ -161,7 +159,7 @@ #size-cells = <1>; #interrupt-cells = <2>; device_type = "soc"; - compatible = "simple-bus"; + compatible = "fsl,mpc8641-soc", "simple-bus"; ranges = <0x0 0xfef00000 0x00100000>; bus-frequency = <33333333>; @@ -412,5 +410,4 @@ 0x0 0x00400000>; }; }; - }; -- cgit v1.2.3-70-g09d2 From 797a747a82e23530ee45d2927bf84f3571c1acb2 Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Tue, 18 Aug 2009 15:21:40 +0000 Subject: powerpc/mm: Fix assert_pte_locked to work properly on uniprocessor Since the pte_lockptr is a spinlock it gets optimized away on uniprocessor builds so using spin_is_locked is not correct. We can use assert_spin_locked instead and get the proper behavior between UP and SMP builds. Signed-off-by: Kumar Gala Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/mm/pgtable.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/powerpc/mm/pgtable.c b/arch/powerpc/mm/pgtable.c index cafb2a26954..b6b32487e74 100644 --- a/arch/powerpc/mm/pgtable.c +++ b/arch/powerpc/mm/pgtable.c @@ -254,7 +254,7 @@ void assert_pte_locked(struct mm_struct *mm, unsigned long addr) BUG_ON(pud_none(*pud)); pmd = pmd_offset(pud, addr); BUG_ON(!pmd_present(*pmd)); - BUG_ON(!spin_is_locked(pte_lockptr(mm, pmd))); + assert_spin_locked(pte_lockptr(mm, pmd)); } #endif /* CONFIG_DEBUG_VM */ -- cgit v1.2.3-70-g09d2 From ae142e0c52b38e44d28b12f77c6e7faa96f7a069 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Fri, 12 Jun 2009 04:31:52 +0000 Subject: powerpc/sputrace: Use the generic event tracer I wrote sputrace before generic tracing infrastrucure was available. Now that we have the generic event tracer we can convert it over and remove a lot of code: 8 files changed, 45 insertions(+), 285 deletions(-) To use it make sure CONFIG_EVENT_TRACING is enabled and then enable the spufs trace channel by echo 1 > /sys/kernel/debug/tracing/events/spufs/spufs_context/enable and then read the trace records using e.g. cat /sys/kernel/debug/tracing/trace Signed-off-by: Christoph Hellwig Acked-by: Jeremy Kerr Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/platforms/cell/Kconfig | 7 - arch/powerpc/platforms/cell/spufs/Makefile | 3 +- arch/powerpc/platforms/cell/spufs/context.c | 1 + arch/powerpc/platforms/cell/spufs/file.c | 1 + arch/powerpc/platforms/cell/spufs/sched.c | 2 + arch/powerpc/platforms/cell/spufs/spufs.h | 5 - arch/powerpc/platforms/cell/spufs/sputrace.c | 272 --------------------------- arch/powerpc/platforms/cell/spufs/sputrace.h | 39 ++++ 8 files changed, 45 insertions(+), 285 deletions(-) delete mode 100644 arch/powerpc/platforms/cell/spufs/sputrace.c create mode 100644 arch/powerpc/platforms/cell/spufs/sputrace.h (limited to 'arch') diff --git a/arch/powerpc/platforms/cell/Kconfig b/arch/powerpc/platforms/cell/Kconfig index 50f17bdd3c1..48cd7d2e1b7 100644 --- a/arch/powerpc/platforms/cell/Kconfig +++ b/arch/powerpc/platforms/cell/Kconfig @@ -80,13 +80,6 @@ config SPU_FS_64K_LS uses 4K pages. This can improve performances of applications using multiple SPEs by lowering the TLB pressure on them. -config SPU_TRACE - tristate "SPU event tracing support" - depends on SPU_FS && MARKERS - help - This option allows reading a trace of spu-related events through - the sputrace file in procfs. - config SPU_BASE bool default n diff --git a/arch/powerpc/platforms/cell/spufs/Makefile b/arch/powerpc/platforms/cell/spufs/Makefile index 99610a6361f..b93f877ba50 100644 --- a/arch/powerpc/platforms/cell/spufs/Makefile +++ b/arch/powerpc/platforms/cell/spufs/Makefile @@ -4,7 +4,8 @@ spufs-y += inode.o file.o context.o syscalls.o coredump.o spufs-y += sched.o backing_ops.o hw_ops.o run.o gang.o spufs-y += switch.o fault.o lscsa_alloc.o -obj-$(CONFIG_SPU_TRACE) += sputrace.o +# magic for the trace events +CFLAGS_sched.o := -I$(src) # Rules to build switch.o with the help of SPU tool chain SPU_CROSS := spu- diff --git a/arch/powerpc/platforms/cell/spufs/context.c b/arch/powerpc/platforms/cell/spufs/context.c index db5398c0339..0c87bcd2452 100644 --- a/arch/powerpc/platforms/cell/spufs/context.c +++ b/arch/powerpc/platforms/cell/spufs/context.c @@ -28,6 +28,7 @@ #include #include #include "spufs.h" +#include "sputrace.h" atomic_t nr_spu_contexts = ATOMIC_INIT(0); diff --git a/arch/powerpc/platforms/cell/spufs/file.c b/arch/powerpc/platforms/cell/spufs/file.c index d6a519e6e1c..ab8aef9bb8e 100644 --- a/arch/powerpc/platforms/cell/spufs/file.c +++ b/arch/powerpc/platforms/cell/spufs/file.c @@ -38,6 +38,7 @@ #include #include "spufs.h" +#include "sputrace.h" #define SPUFS_MMAP_4K (PAGE_SIZE == 0x1000) diff --git a/arch/powerpc/platforms/cell/spufs/sched.c b/arch/powerpc/platforms/cell/spufs/sched.c index f085369301b..bb5b77c66d0 100644 --- a/arch/powerpc/platforms/cell/spufs/sched.c +++ b/arch/powerpc/platforms/cell/spufs/sched.c @@ -47,6 +47,8 @@ #include #include #include "spufs.h" +#define CREATE_TRACE_POINTS +#include "sputrace.h" struct spu_prio_array { DECLARE_BITMAP(bitmap, MAX_PRIO); diff --git a/arch/powerpc/platforms/cell/spufs/spufs.h b/arch/powerpc/platforms/cell/spufs/spufs.h index ae31573bea4..c448bac6551 100644 --- a/arch/powerpc/platforms/cell/spufs/spufs.h +++ b/arch/powerpc/platforms/cell/spufs/spufs.h @@ -373,9 +373,4 @@ extern void spu_free_lscsa(struct spu_state *csa); extern void spuctx_switch_state(struct spu_context *ctx, enum spu_utilization_state new_state); -#define spu_context_trace(name, ctx, spu) \ - trace_mark(name, "ctx %p spu %p", ctx, spu); -#define spu_context_nospu_trace(name, ctx) \ - trace_mark(name, "ctx %p", ctx); - #endif diff --git a/arch/powerpc/platforms/cell/spufs/sputrace.c b/arch/powerpc/platforms/cell/spufs/sputrace.c deleted file mode 100644 index d0b1f3f4d9c..00000000000 --- a/arch/powerpc/platforms/cell/spufs/sputrace.c +++ /dev/null @@ -1,272 +0,0 @@ -/* - * Copyright (C) 2007 IBM Deutschland Entwicklung GmbH - * Released under GPL v2. - * - * Partially based on net/ipv4/tcp_probe.c. - * - * Simple tracing facility for spu contexts. - */ -#include -#include -#include -#include -#include -#include -#include -#include -#include "spufs.h" - -struct spu_probe { - const char *name; - const char *format; - marker_probe_func *probe_func; -}; - -struct sputrace { - ktime_t tstamp; - int owner_tid; /* owner */ - int curr_tid; - const char *name; - int number; -}; - -static int bufsize __read_mostly = 16384; -MODULE_PARM_DESC(bufsize, "Log buffer size (number of records)"); -module_param(bufsize, int, 0); - - -static DEFINE_SPINLOCK(sputrace_lock); -static DECLARE_WAIT_QUEUE_HEAD(sputrace_wait); -static ktime_t sputrace_start; -static unsigned long sputrace_head, sputrace_tail; -static struct sputrace *sputrace_log; -static int sputrace_logging; - -static int sputrace_used(void) -{ - return (sputrace_head - sputrace_tail) % bufsize; -} - -static inline int sputrace_avail(void) -{ - return bufsize - sputrace_used(); -} - -static int sputrace_sprint(char *tbuf, int n) -{ - const struct sputrace *t = sputrace_log + sputrace_tail % bufsize; - struct timespec tv = - ktime_to_timespec(ktime_sub(t->tstamp, sputrace_start)); - - return snprintf(tbuf, n, - "[%lu.%09lu] %d: %s (ctxthread = %d, spu = %d)\n", - (unsigned long) tv.tv_sec, - (unsigned long) tv.tv_nsec, - t->curr_tid, - t->name, - t->owner_tid, - t->number); -} - -static ssize_t sputrace_read(struct file *file, char __user *buf, - size_t len, loff_t *ppos) -{ - int error = 0, cnt = 0; - - if (!buf || len < 0) - return -EINVAL; - - while (cnt < len) { - char tbuf[128]; - int width; - - /* If we have data ready to return, don't block waiting - * for more */ - if (cnt > 0 && sputrace_used() == 0) - break; - - error = wait_event_interruptible(sputrace_wait, - sputrace_used() > 0); - if (error) - break; - - spin_lock(&sputrace_lock); - if (sputrace_head == sputrace_tail) { - spin_unlock(&sputrace_lock); - continue; - } - - width = sputrace_sprint(tbuf, sizeof(tbuf)); - if (width < len) - sputrace_tail = (sputrace_tail + 1) % bufsize; - spin_unlock(&sputrace_lock); - - if (width >= len) - break; - - error = copy_to_user(buf + cnt, tbuf, width); - if (error) - break; - cnt += width; - } - - return cnt == 0 ? error : cnt; -} - -static int sputrace_open(struct inode *inode, struct file *file) -{ - int rc; - - spin_lock(&sputrace_lock); - if (sputrace_logging) { - rc = -EBUSY; - goto out; - } - - sputrace_logging = 1; - sputrace_head = sputrace_tail = 0; - sputrace_start = ktime_get(); - rc = 0; - -out: - spin_unlock(&sputrace_lock); - return rc; -} - -static int sputrace_release(struct inode *inode, struct file *file) -{ - spin_lock(&sputrace_lock); - sputrace_logging = 0; - spin_unlock(&sputrace_lock); - return 0; -} - -static const struct file_operations sputrace_fops = { - .owner = THIS_MODULE, - .open = sputrace_open, - .read = sputrace_read, - .release = sputrace_release, -}; - -static void sputrace_log_item(const char *name, struct spu_context *ctx, - struct spu *spu) -{ - spin_lock(&sputrace_lock); - - if (!sputrace_logging) { - spin_unlock(&sputrace_lock); - return; - } - - if (sputrace_avail() > 1) { - struct sputrace *t = sputrace_log + sputrace_head; - - t->tstamp = ktime_get(); - t->owner_tid = ctx->tid; - t->name = name; - t->curr_tid = current->pid; - t->number = spu ? spu->number : -1; - - sputrace_head = (sputrace_head + 1) % bufsize; - } else { - printk(KERN_WARNING - "sputrace: lost samples due to full buffer.\n"); - } - spin_unlock(&sputrace_lock); - - wake_up(&sputrace_wait); -} - -static void spu_context_event(void *probe_private, void *call_data, - const char *format, va_list *args) -{ - struct spu_probe *p = probe_private; - struct spu_context *ctx; - struct spu *spu; - - ctx = va_arg(*args, struct spu_context *); - spu = va_arg(*args, struct spu *); - - sputrace_log_item(p->name, ctx, spu); -} - -static void spu_context_nospu_event(void *probe_private, void *call_data, - const char *format, va_list *args) -{ - struct spu_probe *p = probe_private; - struct spu_context *ctx; - - ctx = va_arg(*args, struct spu_context *); - - sputrace_log_item(p->name, ctx, NULL); -} - -struct spu_probe spu_probes[] = { - { "spu_bind_context__enter", "ctx %p spu %p", spu_context_event }, - { "spu_unbind_context__enter", "ctx %p spu %p", spu_context_event }, - { "spu_get_idle__enter", "ctx %p", spu_context_nospu_event }, - { "spu_get_idle__found", "ctx %p spu %p", spu_context_event }, - { "spu_get_idle__not_found", "ctx %p", spu_context_nospu_event }, - { "spu_find_victim__enter", "ctx %p", spu_context_nospu_event }, - { "spusched_tick__preempt", "ctx %p spu %p", spu_context_event }, - { "spusched_tick__newslice", "ctx %p", spu_context_nospu_event }, - { "spu_yield__enter", "ctx %p", spu_context_nospu_event }, - { "spu_deactivate__enter", "ctx %p", spu_context_nospu_event }, - { "__spu_deactivate__unload", "ctx %p spu %p", spu_context_event }, - { "spufs_ps_fault__enter", "ctx %p", spu_context_nospu_event }, - { "spufs_ps_fault__sleep", "ctx %p", spu_context_nospu_event }, - { "spufs_ps_fault__wake", "ctx %p spu %p", spu_context_event }, - { "spufs_ps_fault__insert", "ctx %p spu %p", spu_context_event }, - { "spu_acquire_saved__enter", "ctx %p", spu_context_nospu_event }, - { "destroy_spu_context__enter", "ctx %p", spu_context_nospu_event }, - { "spufs_stop_callback__enter", "ctx %p spu %p", spu_context_event }, -}; - -static int __init sputrace_init(void) -{ - struct proc_dir_entry *entry; - int i, error = -ENOMEM; - - sputrace_log = kcalloc(bufsize, sizeof(struct sputrace), GFP_KERNEL); - if (!sputrace_log) - goto out; - - entry = proc_create("sputrace", S_IRUSR, NULL, &sputrace_fops); - if (!entry) - goto out_free_log; - - for (i = 0; i < ARRAY_SIZE(spu_probes); i++) { - struct spu_probe *p = &spu_probes[i]; - - error = marker_probe_register(p->name, p->format, - p->probe_func, p); - if (error) - printk(KERN_INFO "Unable to register probe %s\n", - p->name); - } - - return 0; - -out_free_log: - kfree(sputrace_log); -out: - return -ENOMEM; -} - -static void __exit sputrace_exit(void) -{ - int i; - - for (i = 0; i < ARRAY_SIZE(spu_probes); i++) - marker_probe_unregister(spu_probes[i].name, - spu_probes[i].probe_func, &spu_probes[i]); - - remove_proc_entry("sputrace", NULL); - kfree(sputrace_log); - marker_synchronize_unregister(); -} - -module_init(sputrace_init); -module_exit(sputrace_exit); - -MODULE_LICENSE("GPL"); diff --git a/arch/powerpc/platforms/cell/spufs/sputrace.h b/arch/powerpc/platforms/cell/spufs/sputrace.h new file mode 100644 index 00000000000..db2656aa410 --- /dev/null +++ b/arch/powerpc/platforms/cell/spufs/sputrace.h @@ -0,0 +1,39 @@ +#if !defined(_TRACE_SPUFS_H) || defined(TRACE_HEADER_MULTI_READ) +#define _TRACE_SPUFS_H + +#include + +#undef TRACE_SYSTEM +#define TRACE_SYSTEM spufs + +TRACE_EVENT(spufs_context, + TP_PROTO(struct spu_context *ctx, struct spu *spu, const char *name), + TP_ARGS(ctx, spu, name), + + TP_STRUCT__entry( + __field(const char *, name) + __field(int, owner_tid) + __field(int, number) + ), + + TP_fast_assign( + __entry->name = name; + __entry->owner_tid = ctx->tid; + __entry->number = spu ? spu->number : -1; + ), + + TP_printk("%s (ctxthread = %d, spu = %d)", + __entry->name, __entry->owner_tid, __entry->number) +); + +#define spu_context_trace(name, ctx, spu) \ + trace_spufs_context(ctx, spu, __stringify(name)) +#define spu_context_nospu_trace(name, ctx) \ + trace_spufs_context(ctx, NULL, __stringify(name)) + +#endif /* _TRACE_SPUFS_H */ + +#undef TRACE_INCLUDE_PATH +#define TRACE_INCLUDE_PATH . +#define TRACE_INCLUDE_FILE sputrace +#include -- cgit v1.2.3-70-g09d2 From 690a2d074ead1867ca5a1976284ca1c89ebc04c6 Mon Sep 17 00:00:00 2001 From: Martyn Welch Date: Thu, 2 Jul 2009 06:12:18 +0000 Subject: powerpc/nvram: Allow byte length reads from mmio NVRAM driver Add a byte length read and write interface compatible with the nvram_generic driver interface to the mmio driver. Signed-off-by: Martyn Welch Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/sysdev/mmio_nvram.c | 32 ++++++++++++++++++++++++++++++++ 1 file changed, 32 insertions(+) (limited to 'arch') diff --git a/arch/powerpc/sysdev/mmio_nvram.c b/arch/powerpc/sysdev/mmio_nvram.c index 7b49633a4bd..20732420906 100644 --- a/arch/powerpc/sysdev/mmio_nvram.c +++ b/arch/powerpc/sysdev/mmio_nvram.c @@ -53,6 +53,23 @@ static ssize_t mmio_nvram_read(char *buf, size_t count, loff_t *index) return count; } +static unsigned char mmio_nvram_read_val(int addr) +{ + unsigned long flags; + unsigned char val; + + if (addr >= mmio_nvram_len) + return 0xff; + + spin_lock_irqsave(&mmio_nvram_lock, flags); + + val = ioread8(mmio_nvram_start + addr); + + spin_unlock_irqrestore(&mmio_nvram_lock, flags); + + return val; +} + static ssize_t mmio_nvram_write(char *buf, size_t count, loff_t *index) { unsigned long flags; @@ -72,6 +89,19 @@ static ssize_t mmio_nvram_write(char *buf, size_t count, loff_t *index) return count; } +void mmio_nvram_write_val(int addr, unsigned char val) +{ + unsigned long flags; + + if (addr < mmio_nvram_len) { + spin_lock_irqsave(&mmio_nvram_lock, flags); + + iowrite8(val, mmio_nvram_start + addr); + + spin_unlock_irqrestore(&mmio_nvram_lock, flags); + } +} + static ssize_t mmio_nvram_get_size(void) { return mmio_nvram_len; @@ -114,6 +144,8 @@ int __init mmio_nvram_init(void) printk(KERN_INFO "mmio NVRAM, %luk at 0x%lx mapped to %p\n", mmio_nvram_len >> 10, nvram_addr, mmio_nvram_start); + ppc_md.nvram_read_val = mmio_nvram_read_val; + ppc_md.nvram_write_val = mmio_nvram_write_val; ppc_md.nvram_read = mmio_nvram_read; ppc_md.nvram_write = mmio_nvram_write; ppc_md.nvram_size = mmio_nvram_get_size; -- cgit v1.2.3-70-g09d2 From a888ad451a96881a7e40f40f717d05f1f3b26ad4 Mon Sep 17 00:00:00 2001 From: Stoyan Gaydarov Date: Tue, 21 Jul 2009 17:02:31 +0000 Subject: powerpc: ARRAY_SIZE changes in pasemi and powermac code These changes were a direct result of using a semantic patch More information can be found at http://www.emn.fr/x-info/coccinelle/ Signed-off-by: Stoyan Gaydarov Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/platforms/pasemi/idle.c | 2 +- arch/powerpc/platforms/powermac/feature.c | 4 ++-- 2 files changed, 3 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/platforms/pasemi/idle.c b/arch/powerpc/platforms/pasemi/idle.c index 43911d8b020..75b296bc51a 100644 --- a/arch/powerpc/platforms/pasemi/idle.c +++ b/arch/powerpc/platforms/pasemi/idle.c @@ -90,7 +90,7 @@ machine_late_initcall(pasemi, pasemi_idle_init); static int __init idle_param(char *p) { int i; - for (i = 0; i < sizeof(modes)/sizeof(struct sleep_mode); i++) { + for (i = 0; i < ARRAY_SIZE(modes); i++) { if (!strcmp(modes[i].name, p)) { current_mode = i; break; diff --git a/arch/powerpc/platforms/powermac/feature.c b/arch/powerpc/platforms/powermac/feature.c index e6c0040ee79..095de3227d8 100644 --- a/arch/powerpc/platforms/powermac/feature.c +++ b/arch/powerpc/platforms/powermac/feature.c @@ -2419,13 +2419,13 @@ static int __init probe_motherboard(void) dt = of_find_node_by_name(NULL, "device-tree"); if (dt != NULL) model = of_get_property(dt, "model", NULL); - for(i=0; model && i<(sizeof(pmac_mb_defs)/sizeof(struct pmac_mb_def)); i++) { + for(i=0; model && i Date: Mon, 27 Jul 2009 22:02:39 +0000 Subject: powerpc/prom_init: Evaluate mem kernel parameter for early allocation Evaluate mem kernel parameter for early memory allocations. If mem is set no allocation in the region above the given boundary is allowed. The current code doesn't take care about this and allocate memory above the given mem boundary. Signed-off-by: Benjamin Krill Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/prom_init.c | 103 +++++++++++++++++++++++++++++++++++++++- 1 file changed, 101 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/kernel/prom_init.c b/arch/powerpc/kernel/prom_init.c index d942404779c..864334b337a 100644 --- a/arch/powerpc/kernel/prom_init.c +++ b/arch/powerpc/kernel/prom_init.c @@ -190,6 +190,8 @@ static int __initdata of_platform; static char __initdata prom_cmd_line[COMMAND_LINE_SIZE]; +static unsigned long __initdata prom_memory_limit; + static unsigned long __initdata alloc_top; static unsigned long __initdata alloc_top_high; static unsigned long __initdata alloc_bottom; @@ -484,6 +486,67 @@ static int __init prom_setprop(phandle node, const char *nodename, return call_prom("interpret", 1, 1, (u32)(unsigned long) cmd); } +/* We can't use the standard versions because of RELOC headaches. */ +#define isxdigit(c) (('0' <= (c) && (c) <= '9') \ + || ('a' <= (c) && (c) <= 'f') \ + || ('A' <= (c) && (c) <= 'F')) + +#define isdigit(c) ('0' <= (c) && (c) <= '9') +#define islower(c) ('a' <= (c) && (c) <= 'z') +#define toupper(c) (islower(c) ? ((c) - 'a' + 'A') : (c)) + +unsigned long prom_strtoul(const char *cp, const char **endp) +{ + unsigned long result = 0, base = 10, value; + + if (*cp == '0') { + base = 8; + cp++; + if (toupper(*cp) == 'X') { + cp++; + base = 16; + } + } + + while (isxdigit(*cp) && + (value = isdigit(*cp) ? *cp - '0' : toupper(*cp) - 'A' + 10) < base) { + result = result * base + value; + cp++; + } + + if (endp) + *endp = cp; + + return result; +} + +unsigned long prom_memparse(const char *ptr, const char **retptr) +{ + unsigned long ret = prom_strtoul(ptr, retptr); + int shift = 0; + + /* + * We can't use a switch here because GCC *may* generate a + * jump table which won't work, because we're not running at + * the address we're linked at. + */ + if ('G' == **retptr || 'g' == **retptr) + shift = 30; + + if ('M' == **retptr || 'm' == **retptr) + shift = 20; + + if ('K' == **retptr || 'k' == **retptr) + shift = 10; + + if (shift) { + ret <<= shift; + (*retptr)++; + } + + return ret; +} + /* * Early parsing of the command line passed to the kernel, used for * "mem=x" and the options that affect the iommu @@ -491,9 +554,8 @@ static int __init prom_setprop(phandle node, const char *nodename, static void __init early_cmdline_parse(void) { struct prom_t *_prom = &RELOC(prom); -#ifdef CONFIG_PPC64 const char *opt; -#endif + char *p; int l = 0; @@ -521,6 +583,15 @@ static void __init early_cmdline_parse(void) RELOC(prom_iommu_force_on) = 1; } #endif + opt = strstr(RELOC(prom_cmd_line), RELOC("mem=")); + if (opt) { + opt += 4; + RELOC(prom_memory_limit) = prom_memparse(opt, (const char **)&opt); +#ifdef CONFIG_PPC64 + /* Align to 16 MB == size of ppc64 large page */ + RELOC(prom_memory_limit) = ALIGN(RELOC(prom_memory_limit), 0x1000000); +#endif + } } #ifdef CONFIG_PPC_PSERIES @@ -1026,6 +1097,29 @@ static void __init prom_init_mem(void) RELOC(alloc_bottom) = PAGE_ALIGN(RELOC(prom_initrd_end)); } + /* + * If prom_memory_limit is set we reduce the upper limits *except* for + * alloc_top_high. This must be the real top of RAM so we can put + * TCE's up there. + */ + + RELOC(alloc_top_high) = RELOC(ram_top); + + if (RELOC(prom_memory_limit)) { + if (RELOC(prom_memory_limit) <= RELOC(alloc_bottom)) { + prom_printf("Ignoring mem=%x <= alloc_bottom.\n", + RELOC(prom_memory_limit)); + RELOC(prom_memory_limit) = 0; + } else if (RELOC(prom_memory_limit) >= RELOC(ram_top)) { + prom_printf("Ignoring mem=%x >= ram_top.\n", + RELOC(prom_memory_limit)); + RELOC(prom_memory_limit) = 0; + } else { + RELOC(ram_top) = RELOC(prom_memory_limit); + RELOC(rmo_top) = min(RELOC(rmo_top), RELOC(prom_memory_limit)); + } + } + /* * Setup our top alloc point, that is top of RMO or top of * segment 0 when running non-LPAR. @@ -1041,6 +1135,7 @@ static void __init prom_init_mem(void) RELOC(alloc_top_high) = RELOC(ram_top); prom_printf("memory layout at init:\n"); + prom_printf(" memory_limit : %x (16 MB aligned)\n", RELOC(prom_memory_limit)); prom_printf(" alloc_bottom : %x\n", RELOC(alloc_bottom)); prom_printf(" alloc_top : %x\n", RELOC(alloc_top)); prom_printf(" alloc_top_hi : %x\n", RELOC(alloc_top_high)); @@ -2395,6 +2490,10 @@ unsigned long __init prom_init(unsigned long r3, unsigned long r4, /* * Fill in some infos for use by the kernel later on */ + if (RELOC(prom_memory_limit)) + prom_setprop(_prom->chosen, "/chosen", "linux,memory-limit", + &RELOC(prom_memory_limit), + sizeof(prom_memory_limit)); #ifdef CONFIG_PPC64 if (RELOC(prom_iommu_off)) prom_setprop(_prom->chosen, "/chosen", "linux,iommu-off", -- cgit v1.2.3-70-g09d2 From 02a606c2c47a2e4714225d0c3513ca03679f01d2 Mon Sep 17 00:00:00 2001 From: roel kluin Date: Thu, 30 Jul 2009 06:02:18 +0000 Subject: powerpc: Missing tests for NULL after ioremap() Missing tests after ioremap() Signed-off-by: Roel Kluin Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/platforms/powermac/feature.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/powerpc/platforms/powermac/feature.c b/arch/powerpc/platforms/powermac/feature.c index 095de3227d8..fbc9bbd74db 100644 --- a/arch/powerpc/platforms/powermac/feature.c +++ b/arch/powerpc/platforms/powermac/feature.c @@ -2589,9 +2589,16 @@ static void __init probe_uninorth(void) if (address == 0) return; uninorth_base = ioremap(address, 0x40000); + if (uninorth_base == NULL) + return; uninorth_rev = in_be32(UN_REG(UNI_N_VERSION)); - if (uninorth_maj == 3 || uninorth_maj == 4) + if (uninorth_maj == 3 || uninorth_maj == 4) { u3_ht_base = ioremap(address + U3_HT_CONFIG_BASE, 0x1000); + if (u3_ht_base == NULL) { + iounmap(uninorth_base); + return; + } + } printk(KERN_INFO "Found %s memory controller & host bridge" " @ 0x%08x revision: 0x%02x\n", uninorth_maj == 3 ? "U3" : -- cgit v1.2.3-70-g09d2 From 9413c8836a16e9d034928a7f9d3ad81bebd71ce9 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Wed, 29 Jul 2009 02:06:42 +0000 Subject: powerpc/cell: Move CBE_IOPTE_* to As doesn't contain any other hardware specific definitions but only interfaces. Reported-by: Arnd Bergmann Signed-off-by: Geert Uytterhoeven Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/include/asm/cell-regs.h | 11 +++++++++++ arch/powerpc/include/asm/iommu.h | 10 ---------- arch/powerpc/platforms/ps3/mm.c | 2 +- arch/powerpc/platforms/ps3/system-bus.c | 2 +- drivers/block/ps3vram.c | 2 +- drivers/video/ps3fb.c | 2 +- 6 files changed, 15 insertions(+), 14 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/include/asm/cell-regs.h b/arch/powerpc/include/asm/cell-regs.h index fd6fd00434e..fdf64fd2595 100644 --- a/arch/powerpc/include/asm/cell-regs.h +++ b/arch/powerpc/include/asm/cell-regs.h @@ -303,6 +303,17 @@ struct cbe_mic_tm_regs { extern struct cbe_mic_tm_regs __iomem *cbe_get_mic_tm_regs(struct device_node *np); extern struct cbe_mic_tm_regs __iomem *cbe_get_cpu_mic_tm_regs(int cpu); + +/* Cell page table entries */ +#define CBE_IOPTE_PP_W 0x8000000000000000ul /* protection: write */ +#define CBE_IOPTE_PP_R 0x4000000000000000ul /* protection: read */ +#define CBE_IOPTE_M 0x2000000000000000ul /* coherency required */ +#define CBE_IOPTE_SO_R 0x1000000000000000ul /* ordering: writes */ +#define CBE_IOPTE_SO_RW 0x1800000000000000ul /* ordering: r & w */ +#define CBE_IOPTE_RPN_Mask 0x07fffffffffff000ul /* RPN */ +#define CBE_IOPTE_H 0x0000000000000800ul /* cache hint */ +#define CBE_IOPTE_IOID_Mask 0x00000000000007fful /* ioid */ + /* some utility functions to deal with SMT */ extern u32 cbe_get_hw_thread_id(int cpu); extern u32 cbe_cpu_to_node(int cpu); diff --git a/arch/powerpc/include/asm/iommu.h b/arch/powerpc/include/asm/iommu.h index 7ead7c16fb7..7464c0daddd 100644 --- a/arch/powerpc/include/asm/iommu.h +++ b/arch/powerpc/include/asm/iommu.h @@ -35,16 +35,6 @@ #define IOMMU_PAGE_MASK (~((1 << IOMMU_PAGE_SHIFT) - 1)) #define IOMMU_PAGE_ALIGN(addr) _ALIGN_UP(addr, IOMMU_PAGE_SIZE) -/* Cell page table entries */ -#define CBE_IOPTE_PP_W 0x8000000000000000ul /* protection: write */ -#define CBE_IOPTE_PP_R 0x4000000000000000ul /* protection: read */ -#define CBE_IOPTE_M 0x2000000000000000ul /* coherency required */ -#define CBE_IOPTE_SO_R 0x1000000000000000ul /* ordering: writes */ -#define CBE_IOPTE_SO_RW 0x1800000000000000ul /* ordering: r & w */ -#define CBE_IOPTE_RPN_Mask 0x07fffffffffff000ul /* RPN */ -#define CBE_IOPTE_H 0x0000000000000800ul /* cache hint */ -#define CBE_IOPTE_IOID_Mask 0x00000000000007fful /* ioid */ - /* Boot time flags */ extern int iommu_is_off; extern int iommu_force_on; diff --git a/arch/powerpc/platforms/ps3/mm.c b/arch/powerpc/platforms/ps3/mm.c index 846eb8b57fd..189a25b8073 100644 --- a/arch/powerpc/platforms/ps3/mm.c +++ b/arch/powerpc/platforms/ps3/mm.c @@ -23,8 +23,8 @@ #include #include +#include #include -#include #include #include #include diff --git a/arch/powerpc/platforms/ps3/system-bus.c b/arch/powerpc/platforms/ps3/system-bus.c index 3f763c5284a..676f989ed4e 100644 --- a/arch/powerpc/platforms/ps3/system-bus.c +++ b/arch/powerpc/platforms/ps3/system-bus.c @@ -27,7 +27,7 @@ #include #include #include -#include +#include #include "platform.h" diff --git a/drivers/block/ps3vram.c b/drivers/block/ps3vram.c index 095f97e6066..c8753a9ed29 100644 --- a/drivers/block/ps3vram.c +++ b/drivers/block/ps3vram.c @@ -13,8 +13,8 @@ #include #include +#include #include -#include #include #include #include diff --git a/drivers/video/ps3fb.c b/drivers/video/ps3fb.c index c0af638fe70..9c0144ee7ae 100644 --- a/drivers/video/ps3fb.c +++ b/drivers/video/ps3fb.c @@ -32,7 +32,7 @@ #include #include -#include +#include #include #include #include -- cgit v1.2.3-70-g09d2 From 14ea58ad797e4e9b7be755aca0fd3925d0713ede Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Sat, 1 Aug 2009 22:48:27 +0000 Subject: powerpc: Use DIV_ROUND_CLOSEST in time init code The kernel.h macro DIV_ROUND_CLOSEST performs the computation (x + d/2)/d but is perhaps more readable. The semantic patch that makes this change is as follows: (http://www.emn.fr/x-info/coccinelle/) // @haskernel@ @@ #include @depends on haskernel@ expression x,__divisor; @@ - (((x) + ((__divisor) / 2)) / (__divisor)) + DIV_ROUND_CLOSEST(x,__divisor) // Signed-off-by: Julia Lawall Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/time.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/powerpc/kernel/time.c b/arch/powerpc/kernel/time.c index eae4511ceea..edb1edb3646 100644 --- a/arch/powerpc/kernel/time.c +++ b/arch/powerpc/kernel/time.c @@ -479,7 +479,8 @@ static int __init iSeries_tb_recal(void) unsigned long tb_ticks = tb - iSeries_recal_tb; unsigned long titan_usec = (titan - iSeries_recal_titan) >> 12; unsigned long new_tb_ticks_per_sec = (tb_ticks * USEC_PER_SEC)/titan_usec; - unsigned long new_tb_ticks_per_jiffy = (new_tb_ticks_per_sec+(HZ/2))/HZ; + unsigned long new_tb_ticks_per_jiffy = + DIV_ROUND_CLOSEST(new_tb_ticks_per_sec, HZ); long tick_diff = new_tb_ticks_per_jiffy - tb_ticks_per_jiffy; char sign = '+'; /* make sure tb_ticks_per_sec and tb_ticks_per_jiffy are consistent */ -- cgit v1.2.3-70-g09d2 From 6826a57d1abc8ac9f59b24f1a008554c6560a995 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Wed, 5 Aug 2009 12:24:45 +0000 Subject: powerpc: Switch to asm-generic/hardirq.h hardirq.h on powerpc defines a __last_jiffy_stamp field, but it's not actually used anywhere. Signed-off-by: Christoph Hellwig Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/include/asm/hardirq.h | 30 +----------------------------- 1 file changed, 1 insertion(+), 29 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/include/asm/hardirq.h b/arch/powerpc/include/asm/hardirq.h index 288e14d53b7..fb3c05a0cbb 100644 --- a/arch/powerpc/include/asm/hardirq.h +++ b/arch/powerpc/include/asm/hardirq.h @@ -1,29 +1 @@ -#ifndef _ASM_POWERPC_HARDIRQ_H -#define _ASM_POWERPC_HARDIRQ_H -#ifdef __KERNEL__ - -#include -#include - -/* The __last_jiffy_stamp field is needed to ensure that no decrementer - * interrupt is lost on SMP machines. Since on most CPUs it is in the same - * cache line as local_irq_count, it is cheap to access and is also used on UP - * for uniformity. - */ -typedef struct { - unsigned int __softirq_pending; /* set_bit is used on this */ - unsigned int __last_jiffy_stamp; -} ____cacheline_aligned irq_cpustat_t; - -#include /* Standard mappings for irq_cpustat_t above */ - -#define last_jiffy_stamp(cpu) __IRQ_STAT((cpu), __last_jiffy_stamp) - -static inline void ack_bad_irq(int irq) -{ - printk(KERN_CRIT "illegal vector %d received!\n", irq); - BUG(); -} - -#endif /* __KERNEL__ */ -#endif /* _ASM_POWERPC_HARDIRQ_H */ +#include -- cgit v1.2.3-70-g09d2 From a15098c90df1ac2b1bfe1d33dd1c47063213aa9a Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Sun, 9 Aug 2009 19:02:51 +0000 Subject: powerpc: Enable GCOV Make it possible to enable GCOV code coverage measurement on powerpc. Lightly tested on 64-bit, seems to work as expected. Signed-off-by: Michael Ellerman Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/Makefile | 7 +++++++ arch/powerpc/kernel/vdso32/Makefile | 1 + arch/powerpc/kernel/vdso64/Makefile | 2 ++ arch/powerpc/xmon/Makefile | 2 ++ kernel/gcov/Kconfig | 2 +- 5 files changed, 13 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile index 035946f9d5f..720e8c3b8e9 100644 --- a/arch/powerpc/kernel/Makefile +++ b/arch/powerpc/kernel/Makefile @@ -115,6 +115,13 @@ ifneq ($(CONFIG_XMON)$(CONFIG_KEXEC),) obj-y += ppc_save_regs.o endif +# Disable GCOV in odd or sensitive code +GCOV_PROFILE_prom_init.o := n +GCOV_PROFILE_ftrace.o := n +GCOV_PROFILE_machine_kexec_64.o := n +GCOV_PROFILE_machine_kexec_32.o := n +GCOV_PROFILE_kprobes.o := n + extra-$(CONFIG_PPC_FPU) += fpu.o extra-$(CONFIG_ALTIVEC) += vector.o extra-$(CONFIG_PPC64) += entry_64.o diff --git a/arch/powerpc/kernel/vdso32/Makefile b/arch/powerpc/kernel/vdso32/Makefile index c3d57bd01a8..b54b8168813 100644 --- a/arch/powerpc/kernel/vdso32/Makefile +++ b/arch/powerpc/kernel/vdso32/Makefile @@ -12,6 +12,7 @@ endif targets := $(obj-vdso32) vdso32.so vdso32.so.dbg obj-vdso32 := $(addprefix $(obj)/, $(obj-vdso32)) +GCOV_PROFILE := n EXTRA_CFLAGS := -shared -fno-common -fno-builtin EXTRA_CFLAGS += -nostdlib -Wl,-soname=linux-vdso32.so.1 \ diff --git a/arch/powerpc/kernel/vdso64/Makefile b/arch/powerpc/kernel/vdso64/Makefile index fa7f1b8f3e5..dd0c8e93677 100644 --- a/arch/powerpc/kernel/vdso64/Makefile +++ b/arch/powerpc/kernel/vdso64/Makefile @@ -7,6 +7,8 @@ obj-vdso64 = sigtramp.o gettimeofday.o datapage.o cacheflush.o note.o targets := $(obj-vdso64) vdso64.so vdso64.so.dbg obj-vdso64 := $(addprefix $(obj)/, $(obj-vdso64)) +GCOV_PROFILE := n + EXTRA_CFLAGS := -shared -fno-common -fno-builtin EXTRA_CFLAGS += -nostdlib -Wl,-soname=linux-vdso64.so.1 \ $(call ld-option, -Wl$(comma)--hash-style=sysv) diff --git a/arch/powerpc/xmon/Makefile b/arch/powerpc/xmon/Makefile index 85ab97ab840..faa81b6a661 100644 --- a/arch/powerpc/xmon/Makefile +++ b/arch/powerpc/xmon/Makefile @@ -2,6 +2,8 @@ subdir-ccflags-$(CONFIG_PPC_WERROR) := -Werror +GCOV_PROFILE := n + ifdef CONFIG_PPC64 EXTRA_CFLAGS += -mno-minimal-toc endif diff --git a/kernel/gcov/Kconfig b/kernel/gcov/Kconfig index 22e9dcfaa3d..654efd09f6a 100644 --- a/kernel/gcov/Kconfig +++ b/kernel/gcov/Kconfig @@ -34,7 +34,7 @@ config GCOV_KERNEL config GCOV_PROFILE_ALL bool "Profile entire Kernel" depends on GCOV_KERNEL - depends on S390 || X86 + depends on S390 || X86 || (PPC && EXPERIMENTAL) default n ---help--- This options activates profiling for the entire kernel. -- cgit v1.2.3-70-g09d2 From 903444e4297264ec0959e886695911659edb425c Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Sun, 9 Aug 2009 19:06:24 +0000 Subject: powerpc/vmlinux.lds: Move _edata down Currently _edata does not include several data sections, this causes the kernel's report of memory usage at boot to not match reality, and also prevents kmemleak from working - because it scan between _sdata and _edata for pointers to allocated memory. This mirrors a similar change made recently to the x86 linker script. Signed-off-by: Michael Ellerman Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/vmlinux.lds.S | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/kernel/vmlinux.lds.S b/arch/powerpc/kernel/vmlinux.lds.S index 8ef8a14abc9..3bb09975e34 100644 --- a/arch/powerpc/kernel/vmlinux.lds.S +++ b/arch/powerpc/kernel/vmlinux.lds.S @@ -245,10 +245,6 @@ SECTIONS } #endif - . = ALIGN(PAGE_SIZE); - _edata = .; - PROVIDE32 (edata = .); - /* The initial task and kernel stack */ #ifdef CONFIG_PPC32 . = ALIGN(8192); @@ -282,6 +278,10 @@ SECTIONS __nosave_end = .; } + . = ALIGN(PAGE_SIZE); + _edata = .; + PROVIDE32 (edata = .); + /* * And finally the bss */ -- cgit v1.2.3-70-g09d2 From 3c15a68880023722fc794018768df556f438ae98 Mon Sep 17 00:00:00 2001 From: Stephen Rothwell Date: Mon, 10 Aug 2009 17:14:55 +0000 Subject: powerpc: use consistent types in mktree gcc v4.4 currently produces this build warning: arch/powerpc/boot/mktree.c: In function 'main': arch/powerpc/boot/mktree.c:104: warning: dereferencing type-punned pointer will break strict-aliasing rules tmpbuf is only used as an array of unsigned ints, so declare it that way. Signed-off-by: Stephen Rothwell Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/boot/mktree.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/boot/mktree.c b/arch/powerpc/boot/mktree.c index c2baae0a3d8..e2ae24340fc 100644 --- a/arch/powerpc/boot/mktree.c +++ b/arch/powerpc/boot/mktree.c @@ -36,7 +36,7 @@ typedef struct boot_block { } boot_block_t; #define IMGBLK 512 -char tmpbuf[IMGBLK]; +unsigned int tmpbuf[IMGBLK / sizeof(unsigned int)]; int main(int argc, char *argv[]) { @@ -95,13 +95,13 @@ int main(int argc, char *argv[]) /* Assume zImage is an ELF file, and skip the 64K header. */ - if (read(in_fd, tmpbuf, IMGBLK) != IMGBLK) { + if (read(in_fd, tmpbuf, sizeof(tmpbuf)) != sizeof(tmpbuf)) { fprintf(stderr, "%s is too small to be an ELF image\n", argv[1]); exit(4); } - if ((*(unsigned int *)tmpbuf) != htonl(0x7f454c46)) { + if (tmpbuf[0] != htonl(0x7f454c46)) { fprintf(stderr, "%s is not an ELF image\n", argv[1]); exit(4); } @@ -121,11 +121,11 @@ int main(int argc, char *argv[]) } while (nblks-- > 0) { - if (read(in_fd, tmpbuf, IMGBLK) < 0) { + if (read(in_fd, tmpbuf, sizeof(tmpbuf)) < 0) { perror("zImage read"); exit(5); } - cp = (unsigned int *)tmpbuf; + cp = tmpbuf; for (i = 0; i < sizeof(tmpbuf) / sizeof(unsigned int); i++) cksum += *cp++; if (write(out_fd, tmpbuf, sizeof(tmpbuf)) != sizeof(tmpbuf)) { -- cgit v1.2.3-70-g09d2 From 8934210cfe925f0d3e3089c69e9e88021324801b Mon Sep 17 00:00:00 2001 From: Heiko Schocher Date: Fri, 7 Aug 2009 08:41:15 +0200 Subject: powerpc/82xx: mgcoge - updated defconfig - add I2C support - add FCC1 and FCC2 support Signed-off-by: Heiko Schocher Signed-off-by: Kumar Gala --- arch/powerpc/configs/mgcoge_defconfig | 86 ++++++++++++++++++++++++++++++++--- 1 file changed, 80 insertions(+), 6 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/configs/mgcoge_defconfig b/arch/powerpc/configs/mgcoge_defconfig index e9491c1c3f3..30b68bfaceb 100644 --- a/arch/powerpc/configs/mgcoge_defconfig +++ b/arch/powerpc/configs/mgcoge_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31-rc4 -# Wed Jul 29 23:31:51 2009 +# Linux kernel version: 2.6.31-rc5 +# Fri Aug 7 08:19:15 2009 # # CONFIG_PPC64 is not set @@ -158,6 +158,7 @@ CONFIG_BASE_SMALL=0 # CONFIG_MODULES is not set CONFIG_BLOCK=y CONFIG_LBDAF=y +CONFIG_BLK_DEV_BSG=y # CONFIG_BLK_DEV_INTEGRITY is not set # @@ -506,6 +507,7 @@ CONFIG_MTD_PHYSMAP_OF=y # CONFIG_MTD_UBI is not set CONFIG_OF_DEVICE=y CONFIG_OF_GPIO=y +CONFIG_OF_I2C=y CONFIG_OF_MDIO=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y @@ -582,7 +584,8 @@ CONFIG_PHYLIB=y # CONFIG_STE10XP is not set # CONFIG_LSI_ET1011C_PHY is not set CONFIG_FIXED_PHY=y -# CONFIG_MDIO_BITBANG is not set +CONFIG_MDIO_BITBANG=y +# CONFIG_MDIO_GPIO is not set CONFIG_NET_ETHERNET=y CONFIG_MII=y # CONFIG_MACE is not set @@ -608,8 +611,8 @@ CONFIG_MII=y # CONFIG_ATL2 is not set CONFIG_FS_ENET=y CONFIG_FS_ENET_HAS_SCC=y -# CONFIG_FS_ENET_HAS_FCC is not set -# CONFIG_FS_ENET_MDIO_FCC is not set +CONFIG_FS_ENET_HAS_FCC=y +CONFIG_FS_ENET_MDIO_FCC=y # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set @@ -680,7 +683,68 @@ CONFIG_HW_RANDOM=y # CONFIG_APPLICOM is not set # CONFIG_RAW_DRIVER is not set CONFIG_DEVPORT=y -# CONFIG_I2C is not set +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_CHARDEV=y +CONFIG_I2C_HELPER_AUTO=y + +# +# I2C Hardware Bus support +# + +# +# PC SMBus host controller drivers +# +# CONFIG_I2C_ALI1535 is not set +# CONFIG_I2C_ALI15X3 is not set +# CONFIG_I2C_AMD756 is not set +# CONFIG_I2C_AMD8111 is not set +# CONFIG_I2C_I801 is not set +# CONFIG_I2C_ISCH is not set +# CONFIG_I2C_PIIX4 is not set +# CONFIG_I2C_NFORCE2 is not set +# CONFIG_I2C_SIS5595 is not set +# CONFIG_I2C_SIS630 is not set +# CONFIG_I2C_SIS96X is not set +# CONFIG_I2C_VIAPRO is not set + +# +# Mac SMBus host controller drivers +# +# CONFIG_I2C_POWERMAC is not set + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +CONFIG_I2C_CPM=y +# CONFIG_I2C_DESIGNWARE is not set +# CONFIG_I2C_GPIO is not set +# CONFIG_I2C_MPC is not set +# CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set + +# +# Graphics adapter I2C/DDC channel drivers +# +# CONFIG_I2C_VOODOO3 is not set + +# +# Other I2C/SMBus bus drivers +# +# CONFIG_I2C_PCA_PLATFORM is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_PCF8575 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set # @@ -699,6 +763,9 @@ CONFIG_GPIOLIB=y # # I2C GPIO expanders: # +# CONFIG_GPIO_MAX732X is not set +# CONFIG_GPIO_PCA953X is not set +# CONFIG_GPIO_PCF857X is not set # # PCI GPIO expanders: @@ -727,7 +794,14 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_TPS65010 is not set +# CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_PCF50633 is not set +# CONFIG_AB3100_CORE is not set # CONFIG_REGULATOR is not set # CONFIG_MEDIA_SUPPORT is not set -- cgit v1.2.3-70-g09d2 From fc4bdb35fba1c8f464fd85b94a5059e752fc85d4 Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Fri, 14 Aug 2009 09:38:34 -0500 Subject: powerpc/booke: Move MMUCSR definition into mmu-book3e.h The MMUCSR is now defined as part of the Book-3E architecture so we can move it into mmu-book3e.h and add some of the additional bits defined by the architecture specs. Signed-off-by: Kumar Gala --- arch/powerpc/include/asm/mmu-book3e.h | 12 ++++++++++++ arch/powerpc/include/asm/reg_booke.h | 6 ------ arch/powerpc/mm/tlb_nohash_low.S | 2 -- 3 files changed, 12 insertions(+), 8 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/include/asm/mmu-book3e.h b/arch/powerpc/include/asm/mmu-book3e.h index d7458046936..74695816205 100644 --- a/arch/powerpc/include/asm/mmu-book3e.h +++ b/arch/powerpc/include/asm/mmu-book3e.h @@ -114,6 +114,18 @@ #define MAS7_RPN 0xFFFFFFFF +/* Bit definitions for MMUCSR0 */ +#define MMUCSR0_TLB1FI 0x00000002 /* TLB1 Flash invalidate */ +#define MMUCSR0_TLB0FI 0x00000004 /* TLB0 Flash invalidate */ +#define MMUCSR0_TLB2FI 0x00000040 /* TLB2 Flash invalidate */ +#define MMUCSR0_TLB3FI 0x00000020 /* TLB3 Flash invalidate */ +#define MMUCSR0_TLBFI (MMUCSR0_TLB0FI | MMUCSR0_TLB1FI | \ + MMUCSR0_TLB2FI | MMUCSR0_TLB3FI) +#define MMUCSR0_TLB0PS 0x00000780 /* TLB0 Page Size */ +#define MMUCSR0_TLB1PS 0x00007800 /* TLB1 Page Size */ +#define MMUCSR0_TLB2PS 0x00078000 /* TLB2 Page Size */ +#define MMUCSR0_TLB3PS 0x00780000 /* TLB3 Page Size */ + /* TLBnCFG encoding */ #define TLBnCFG_N_ENTRY 0x00000fff /* number of entries */ #define TLBnCFG_HES 0x00002000 /* HW select supported */ diff --git a/arch/powerpc/include/asm/reg_booke.h b/arch/powerpc/include/asm/reg_booke.h index 2c9c706e644..9bb81d99b76 100644 --- a/arch/powerpc/include/asm/reg_booke.h +++ b/arch/powerpc/include/asm/reg_booke.h @@ -430,12 +430,6 @@ #define L2CSR0_L2LOA 0x00000080 /* L2 Cache Lock Overflow Allocate */ #define L2CSR0_L2LO 0x00000020 /* L2 Cache Lock Overflow */ -/* Bit definitions for MMUCSR0 */ -#define MMUCSR0_TLB1FI 0x00000002 /* TLB1 Flash invalidate */ -#define MMUCSR0_TLB0FI 0x00000004 /* TLB0 Flash invalidate */ -#define MMUCSR0_TLB2FI 0x00000040 /* TLB2 Flash invalidate */ -#define MMUCSR0_TLB3FI 0x00000020 /* TLB3 Flash invalidate */ - /* Bit definitions for SGR. */ #define SGR_NORMAL 0 /* Speculative fetching allowed. */ #define SGR_GUARDED 1 /* Speculative fetching disallowed. */ diff --git a/arch/powerpc/mm/tlb_nohash_low.S b/arch/powerpc/mm/tlb_nohash_low.S index 7bcd9fbf6cc..bbdc5b577b8 100644 --- a/arch/powerpc/mm/tlb_nohash_low.S +++ b/arch/powerpc/mm/tlb_nohash_low.S @@ -124,8 +124,6 @@ _GLOBAL(_tlbil_pid) * to have the larger code path before the _SECTION_ELSE */ -#define MMUCSR0_TLBFI (MMUCSR0_TLB0FI | MMUCSR0_TLB1FI | \ - MMUCSR0_TLB2FI | MMUCSR0_TLB3FI) /* * Flush MMU TLB on the local processor */ -- cgit v1.2.3-70-g09d2 From fb8e3e1fe1df963b6c1ab8610682737ccae96ef0 Mon Sep 17 00:00:00 2001 From: Poonam Aggrwal Date: Fri, 7 Aug 2009 21:05:16 +0530 Subject: powerpc/85xx: Add support for P2020RDB board Add support for the P2020RDB reference board from Freescale. Overview of P2020RDB platform - DDR DDR2 1G - NOR Flash 16MByte - NAND Flash 32MByte - 3 Ethernet interfaces 1) etSEC1 - RGMII - connected to a 5 port Vitesse Switch(VSC7385) - Switch is memory mapped through eLBC interface(CS#2) - IRQ1 2) etSEC2 - SGMII - connected to VSC8221 - IRQ2 3) etSEC3 - RGMII - connected to VSC8641 - IRQ3 - 2 1X PCIe interfaces - SD/MMC ,USB - SPI EEPROM - Serial I2C EEPROM Signed-off-by: Poonam Aggrwal Signed-off-by: Kumar Gala --- arch/powerpc/boot/dts/p2020rdb.dts | 586 ++++++++++++++++++++++++++++++ arch/powerpc/configs/mpc85xx_defconfig | 1 + arch/powerpc/platforms/85xx/Kconfig | 9 + arch/powerpc/platforms/85xx/Makefile | 3 +- arch/powerpc/platforms/85xx/mpc85xx_rdb.c | 141 +++++++ 5 files changed, 739 insertions(+), 1 deletion(-) create mode 100644 arch/powerpc/boot/dts/p2020rdb.dts create mode 100644 arch/powerpc/platforms/85xx/mpc85xx_rdb.c (limited to 'arch') diff --git a/arch/powerpc/boot/dts/p2020rdb.dts b/arch/powerpc/boot/dts/p2020rdb.dts new file mode 100644 index 00000000000..da4cb0d8d21 --- /dev/null +++ b/arch/powerpc/boot/dts/p2020rdb.dts @@ -0,0 +1,586 @@ +/* + * P2020 RDB Device Tree Source + * + * Copyright 2009 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/dts-v1/; +/ { + model = "fsl,P2020"; + compatible = "fsl,P2020RDB"; + #address-cells = <2>; + #size-cells = <2>; + + aliases { + ethernet0 = &enet0; + ethernet1 = &enet1; + ethernet2 = &enet2; + serial0 = &serial0; + serial1 = &serial1; + pci0 = &pci0; + pci1 = &pci1; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,P2020@0 { + device_type = "cpu"; + reg = <0x0>; + next-level-cache = <&L2>; + }; + + PowerPC,P2020@1 { + device_type = "cpu"; + reg = <0x1>; + next-level-cache = <&L2>; + }; + }; + + memory { + device_type = "memory"; + }; + + localbus@ffe05000 { + #address-cells = <2>; + #size-cells = <1>; + compatible = "fsl,p2020-elbc", "fsl,elbc", "simple-bus"; + reg = <0 0xffe05000 0 0x1000>; + interrupts = <19 2>; + interrupt-parent = <&mpic>; + + /* NOR and NAND Flashes */ + ranges = <0x0 0x0 0x0 0xef000000 0x01000000 + 0x1 0x0 0x0 0xffa00000 0x00040000 + 0x2 0x0 0x0 0xffb00000 0x00020000>; + + nor@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0x0 0x0 0x1000000>; + bank-width = <2>; + device-width = <1>; + + partition@0 { + /* This location must not be altered */ + /* 256KB for Vitesse 7385 Switch firmware */ + reg = <0x0 0x00040000>; + label = "NOR (RO) Vitesse-7385 Firmware"; + read-only; + }; + + partition@40000 { + /* 256KB for DTB Image */ + reg = <0x00040000 0x00040000>; + label = "NOR (RO) DTB Image"; + read-only; + }; + + partition@80000 { + /* 3.5 MB for Linux Kernel Image */ + reg = <0x00080000 0x00380000>; + label = "NOR (RO) Linux Kernel Image"; + read-only; + }; + + partition@400000 { + /* 11MB for JFFS2 based Root file System */ + reg = <0x00400000 0x00b00000>; + label = "NOR (RW) JFFS2 Root File System"; + }; + + partition@f00000 { + /* This location must not be altered */ + /* 512KB for u-boot Bootloader Image */ + /* 512KB for u-boot Environment Variables */ + reg = <0x00f00000 0x00100000>; + label = "NOR (RO) U-Boot Image"; + read-only; + }; + }; + + nand@1,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,p2020-fcm-nand", + "fsl,elbc-fcm-nand"; + reg = <0x1 0x0 0x40000>; + + partition@0 { + /* This location must not be altered */ + /* 1MB for u-boot Bootloader Image */ + reg = <0x0 0x00100000>; + label = "NAND (RO) U-Boot Image"; + read-only; + }; + + partition@100000 { + /* 1MB for DTB Image */ + reg = <0x00100000 0x00100000>; + label = "NAND (RO) DTB Image"; + read-only; + }; + + partition@200000 { + /* 4MB for Linux Kernel Image */ + reg = <0x00200000 0x00400000>; + label = "NAND (RO) Linux Kernel Image"; + read-only; + }; + + partition@600000 { + /* 4MB for Compressed Root file System Image */ + reg = <0x00600000 0x00400000>; + label = "NAND (RO) Compressed RFS Image"; + read-only; + }; + + partition@a00000 { + /* 7MB for JFFS2 based Root file System */ + reg = <0x00a00000 0x00700000>; + label = "NAND (RW) JFFS2 Root File System"; + }; + + partition@1100000 { + /* 15MB for JFFS2 based Root file System */ + reg = <0x01100000 0x00f00000>; + label = "NAND (RW) Writable User area"; + }; + }; + + L2switch@2,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "vitesse-7385"; + reg = <0x2 0x0 0x20000>; + }; + + }; + + soc@ffe00000 { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + compatible = "fsl,p2020-immr", "simple-bus"; + ranges = <0x0 0x0 0xffe00000 0x100000>; + bus-frequency = <0>; // Filled out by uboot. + + ecm-law@0 { + compatible = "fsl,ecm-law"; + reg = <0x0 0x1000>; + fsl,num-laws = <12>; + }; + + ecm@1000 { + compatible = "fsl,p2020-ecm", "fsl,ecm"; + reg = <0x1000 0x1000>; + interrupts = <17 2>; + interrupt-parent = <&mpic>; + }; + + memory-controller@2000 { + compatible = "fsl,p2020-memory-controller"; + reg = <0x2000 0x1000>; + interrupt-parent = <&mpic>; + interrupts = <18 2>; + }; + + i2c@3000 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; + compatible = "fsl-i2c"; + reg = <0x3000 0x100>; + interrupts = <43 2>; + interrupt-parent = <&mpic>; + dfsrr; + rtc@68 { + compatible = "dallas,ds1339"; + reg = <0x68>; + }; + }; + + i2c@3100 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <1>; + compatible = "fsl-i2c"; + reg = <0x3100 0x100>; + interrupts = <43 2>; + interrupt-parent = <&mpic>; + dfsrr; + }; + + serial0: serial@4500 { + cell-index = <0>; + device_type = "serial"; + compatible = "ns16550"; + reg = <0x4500 0x100>; + clock-frequency = <0>; + interrupts = <42 2>; + interrupt-parent = <&mpic>; + }; + + serial1: serial@4600 { + cell-index = <1>; + device_type = "serial"; + compatible = "ns16550"; + reg = <0x4600 0x100>; + clock-frequency = <0>; + interrupts = <42 2>; + interrupt-parent = <&mpic>; + }; + + spi@7000 { + cell-index = <0>; + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,espi"; + reg = <0x7000 0x1000>; + interrupts = <59 0x2>; + interrupt-parent = <&mpic>; + mode = "cpu"; + + fsl_m25p80@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,espi-flash"; + reg = <0>; + linux,modalias = "fsl_m25p80"; + modal = "s25sl128b"; + spi-max-frequency = <50000000>; + mode = <0>; + + partition@0 { + /* 512KB for u-boot Bootloader Image */ + reg = <0x0 0x00080000>; + label = "SPI (RO) U-Boot Image"; + read-only; + }; + + partition@80000 { + /* 512KB for DTB Image */ + reg = <0x00080000 0x00080000>; + label = "SPI (RO) DTB Image"; + read-only; + }; + + partition@100000 { + /* 4MB for Linux Kernel Image */ + reg = <0x00100000 0x00400000>; + label = "SPI (RO) Linux Kernel Image"; + read-only; + }; + + partition@500000 { + /* 4MB for Compressed RFS Image */ + reg = <0x00500000 0x00400000>; + label = "SPI (RO) Compressed RFS Image"; + read-only; + }; + + partition@900000 { + /* 7MB for JFFS2 based RFS */ + reg = <0x00900000 0x00700000>; + label = "SPI (RW) JFFS2 RFS"; + }; + }; + }; + + dma@c300 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,eloplus-dma"; + reg = <0xc300 0x4>; + ranges = <0x0 0xc100 0x200>; + cell-index = <1>; + dma-channel@0 { + compatible = "fsl,eloplus-dma-channel"; + reg = <0x0 0x80>; + cell-index = <0>; + interrupt-parent = <&mpic>; + interrupts = <76 2>; + }; + dma-channel@80 { + compatible = "fsl,eloplus-dma-channel"; + reg = <0x80 0x80>; + cell-index = <1>; + interrupt-parent = <&mpic>; + interrupts = <77 2>; + }; + dma-channel@100 { + compatible = "fsl,eloplus-dma-channel"; + reg = <0x100 0x80>; + cell-index = <2>; + interrupt-parent = <&mpic>; + interrupts = <78 2>; + }; + dma-channel@180 { + compatible = "fsl,eloplus-dma-channel"; + reg = <0x180 0x80>; + cell-index = <3>; + interrupt-parent = <&mpic>; + interrupts = <79 2>; + }; + }; + + gpio: gpio-controller@f000 { + #gpio-cells = <2>; + compatible = "fsl,mpc8572-gpio"; + reg = <0xf000 0x100>; + interrupts = <47 0x2>; + interrupt-parent = <&mpic>; + gpio-controller; + }; + + L2: l2-cache-controller@20000 { + compatible = "fsl,p2020-l2-cache-controller"; + reg = <0x20000 0x1000>; + cache-line-size = <32>; // 32 bytes + cache-size = <0x80000>; // L2,512K + interrupt-parent = <&mpic>; + interrupts = <16 2>; + }; + + dma@21300 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,eloplus-dma"; + reg = <0x21300 0x4>; + ranges = <0x0 0x21100 0x200>; + cell-index = <0>; + dma-channel@0 { + compatible = "fsl,eloplus-dma-channel"; + reg = <0x0 0x80>; + cell-index = <0>; + interrupt-parent = <&mpic>; + interrupts = <20 2>; + }; + dma-channel@80 { + compatible = "fsl,eloplus-dma-channel"; + reg = <0x80 0x80>; + cell-index = <1>; + interrupt-parent = <&mpic>; + interrupts = <21 2>; + }; + dma-channel@100 { + compatible = "fsl,eloplus-dma-channel"; + reg = <0x100 0x80>; + cell-index = <2>; + interrupt-parent = <&mpic>; + interrupts = <22 2>; + }; + dma-channel@180 { + compatible = "fsl,eloplus-dma-channel"; + reg = <0x180 0x80>; + cell-index = <3>; + interrupt-parent = <&mpic>; + interrupts = <23 2>; + }; + }; + + usb@22000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl-usb2-dr"; + reg = <0x22000 0x1000>; + interrupt-parent = <&mpic>; + interrupts = <28 0x2>; + phy_type = "ulpi"; + }; + + enet0: ethernet@24000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <0>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <0x24000 0x1000>; + ranges = <0x0 0x24000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <29 2 30 2 34 2>; + interrupt-parent = <&mpic>; + fixed-link = <1 1 1000 0 0>; + phy-connection-type = "rgmii-id"; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-mdio"; + reg = <0x520 0x20>; + + phy0: ethernet-phy@0 { + interrupt-parent = <&mpic>; + interrupts = <3 1>; + reg = <0x0>; + }; + phy1: ethernet-phy@1 { + interrupt-parent = <&mpic>; + interrupts = <3 1>; + reg = <0x1>; + }; + }; + }; + + enet1: ethernet@25000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <1>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <0x25000 0x1000>; + ranges = <0x0 0x25000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <35 2 36 2 40 2>; + interrupt-parent = <&mpic>; + tbi-handle = <&tbi0>; + phy-handle = <&phy0>; + phy-connection-type = "sgmii"; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x520 0x20>; + + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + }; + + enet2: ethernet@26000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <2>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <0x26000 0x1000>; + ranges = <0x0 0x26000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <31 2 32 2 33 2>; + interrupt-parent = <&mpic>; + phy-handle = <&phy1>; + phy-connection-type = "rgmii-id"; + }; + + sdhci@2e000 { + compatible = "fsl,p2020-esdhc", "fsl,esdhc"; + reg = <0x2e000 0x1000>; + interrupts = <72 0x2>; + interrupt-parent = <&mpic>; + /* Filled in by U-Boot */ + clock-frequency = <0>; + }; + + crypto@30000 { + compatible = "fsl,sec3.1", "fsl,sec3.0", "fsl,sec2.4", + "fsl,sec2.2", "fsl,sec2.1", "fsl,sec2.0"; + reg = <0x30000 0x10000>; + interrupts = <45 2 58 2>; + interrupt-parent = <&mpic>; + fsl,num-channels = <4>; + fsl,channel-fifo-len = <24>; + fsl,exec-units-mask = <0xbfe>; + fsl,descriptor-types-mask = <0x3ab0ebf>; + }; + + mpic: pic@40000 { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <0x40000 0x40000>; + compatible = "chrp,open-pic"; + device_type = "open-pic"; + }; + + msi@41600 { + compatible = "fsl,p2020-msi", "fsl,mpic-msi"; + reg = <0x41600 0x80>; + msi-available-ranges = <0 0x100>; + interrupts = < + 0xe0 0 + 0xe1 0 + 0xe2 0 + 0xe3 0 + 0xe4 0 + 0xe5 0 + 0xe6 0 + 0xe7 0>; + interrupt-parent = <&mpic>; + }; + + global-utilities@e0000 { //global utilities block + compatible = "fsl,p2020-guts"; + reg = <0xe0000 0x1000>; + fsl,has-rstcr; + }; + }; + + pci0: pcie@ffe09000 { + compatible = "fsl,mpc8548-pcie"; + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <0 0xffe09000 0 0x1000>; + bus-range = <0 255>; + ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0 0xffc30000 0x0 0x10000>; + clock-frequency = <33333333>; + interrupt-parent = <&mpic>; + interrupts = <25 2>; + pcie@0 { + reg = <0x0 0x0 0x0 0x0 0x0>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + ranges = <0x2000000 0x0 0xa0000000 + 0x2000000 0x0 0xa0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; + + pci1: pcie@ffe0a000 { + compatible = "fsl,mpc8548-pcie"; + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <0 0xffe0a000 0 0x1000>; + bus-range = <0 255>; + ranges = <0x2000000 0x0 0xc0000000 0 0xc0000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0 0xffc20000 0x0 0x10000>; + clock-frequency = <33333333>; + interrupt-parent = <&mpic>; + interrupts = <26 2>; + pcie@0 { + reg = <0x0 0x0 0x0 0x0 0x0>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + ranges = <0x2000000 0x0 0xc0000000 + 0x2000000 0x0 0xc0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; +}; diff --git a/arch/powerpc/configs/mpc85xx_defconfig b/arch/powerpc/configs/mpc85xx_defconfig index ada595898af..ee6acc6557f 100644 --- a/arch/powerpc/configs/mpc85xx_defconfig +++ b/arch/powerpc/configs/mpc85xx_defconfig @@ -203,6 +203,7 @@ CONFIG_MPC85xx_CDS=y CONFIG_MPC85xx_MDS=y CONFIG_MPC8536_DS=y CONFIG_MPC85xx_DS=y +CONFIG_MPC85xx_RDB=y CONFIG_SOCRATES=y CONFIG_KSI8560=y # CONFIG_XES_MPC85xx is not set diff --git a/arch/powerpc/platforms/85xx/Kconfig b/arch/powerpc/platforms/85xx/Kconfig index a9b41668897..d3a975e8fd3 100644 --- a/arch/powerpc/platforms/85xx/Kconfig +++ b/arch/powerpc/platforms/85xx/Kconfig @@ -55,6 +55,15 @@ config MPC85xx_DS help This option enables support for the MPC85xx DS (MPC8544 DS) board +config MPC85xx_RDB + bool "Freescale MPC85xx RDB" + select PPC_I8259 + select DEFAULT_UIMAGE + select FSL_ULI1575 + select SWIOTLB + help + This option enables support for the MPC85xx RDB (P2020 RDB) board + config SOCRATES bool "Socrates" select DEFAULT_UIMAGE diff --git a/arch/powerpc/platforms/85xx/Makefile b/arch/powerpc/platforms/85xx/Makefile index 835733f2b12..9098aea0cf3 100644 --- a/arch/powerpc/platforms/85xx/Makefile +++ b/arch/powerpc/platforms/85xx/Makefile @@ -9,10 +9,11 @@ obj-$(CONFIG_MPC85xx_CDS) += mpc85xx_cds.o obj-$(CONFIG_MPC8536_DS) += mpc8536_ds.o obj-$(CONFIG_MPC85xx_DS) += mpc85xx_ds.o obj-$(CONFIG_MPC85xx_MDS) += mpc85xx_mds.o +obj-$(CONFIG_MPC85xx_RDB) += mpc85xx_rdb.o obj-$(CONFIG_STX_GP3) += stx_gp3.o obj-$(CONFIG_TQM85xx) += tqm85xx.o obj-$(CONFIG_SBC8560) += sbc8560.o obj-$(CONFIG_SBC8548) += sbc8548.o obj-$(CONFIG_SOCRATES) += socrates.o socrates_fpga_pic.o obj-$(CONFIG_KSI8560) += ksi8560.o -obj-$(CONFIG_XES_MPC85xx) += xes_mpc85xx.o \ No newline at end of file +obj-$(CONFIG_XES_MPC85xx) += xes_mpc85xx.o diff --git a/arch/powerpc/platforms/85xx/mpc85xx_rdb.c b/arch/powerpc/platforms/85xx/mpc85xx_rdb.c new file mode 100644 index 00000000000..c8468de4acf --- /dev/null +++ b/arch/powerpc/platforms/85xx/mpc85xx_rdb.c @@ -0,0 +1,141 @@ +/* + * MPC85xx RDB Board Setup + * + * Copyright 2009 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#undef DEBUG + +#ifdef DEBUG +#define DBG(fmt, args...) printk(KERN_ERR "%s: " fmt, __func__, ## args) +#else +#define DBG(fmt, args...) +#endif + + +void __init mpc85xx_rdb_pic_init(void) +{ + struct mpic *mpic; + struct resource r; + struct device_node *np; + + np = of_find_node_by_type(NULL, "open-pic"); + if (np == NULL) { + printk(KERN_ERR "Could not find open-pic node\n"); + return; + } + + if (of_address_to_resource(np, 0, &r)) { + printk(KERN_ERR "Failed to map mpic register space\n"); + of_node_put(np); + return; + } + + mpic = mpic_alloc(np, r.start, + MPIC_PRIMARY | MPIC_WANTS_RESET | + MPIC_BIG_ENDIAN | MPIC_BROKEN_FRR_NIRQS | + MPIC_SINGLE_DEST_CPU, + 0, 256, " OpenPIC "); + + BUG_ON(mpic == NULL); + of_node_put(np); + + mpic_init(mpic); + +} + +/* + * Setup the architecture + */ +#ifdef CONFIG_SMP +extern void __init mpc85xx_smp_init(void); +#endif +static void __init mpc85xx_rdb_setup_arch(void) +{ +#ifdef CONFIG_PCI + struct device_node *np; +#endif + + if (ppc_md.progress) + ppc_md.progress("mpc85xx_rdb_setup_arch()", 0); + +#ifdef CONFIG_PCI + for_each_node_by_type(np, "pci") { + if (of_device_is_compatible(np, "fsl,mpc8548-pcie")) + fsl_add_bridge(np, 0); + } + +#endif + +#ifdef CONFIG_SMP + mpc85xx_smp_init(); +#endif + + printk(KERN_INFO "MPC85xx RDB board from Freescale Semiconductor\n"); +} + +static struct of_device_id __initdata mpc85xxrdb_ids[] = { + { .type = "soc", }, + { .compatible = "soc", }, + { .compatible = "simple-bus", }, + { .compatible = "gianfar", }, + {}, +}; + +static int __init mpc85xxrdb_publish_devices(void) +{ + return of_platform_bus_probe(NULL, mpc85xxrdb_ids, NULL); +} +machine_device_initcall(p2020_rdb, mpc85xxrdb_publish_devices); + +/* + * Called very early, device-tree isn't unflattened + */ +static int __init p2020_rdb_probe(void) +{ + unsigned long root = of_get_flat_dt_root(); + + if (of_flat_dt_is_compatible(root, "fsl,P2020RDB")) + return 1; + return 0; +} + +define_machine(p2020_rdb) { + .name = "P2020 RDB", + .probe = p2020_rdb_probe, + .setup_arch = mpc85xx_rdb_setup_arch, + .init_IRQ = mpc85xx_rdb_pic_init, +#ifdef CONFIG_PCI + .pcibios_fixup_bus = fsl_pcibios_fixup_bus, +#endif + .get_irq = mpic_get_irq, + .restart = fsl_rstcr_restart, + .calibrate_decr = generic_calibrate_decr, + .progress = udbg_progress, +}; -- cgit v1.2.3-70-g09d2 From 4de124446b4d68edd6cb747495234be915d56a29 Mon Sep 17 00:00:00 2001 From: Liang Li Date: Wed, 12 Aug 2009 09:34:28 -0400 Subject: powerpc/83xx: Remove second USB node from SBC834x DTS Since only one of the SoC USB devices is brought out to a physical connector on the board, remove the 2nd (USB-DR) node from the DTS. Having it present and USB enabled will cause a hang at boot. Signed-off-by: Liang Li Signed-off-by: Yang Shi Signed-off-by: Paul Gortmaker Signed-off-by: Kumar Gala --- arch/powerpc/boot/dts/sbc8349.dts | 12 ------------ 1 file changed, 12 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/boot/dts/sbc8349.dts b/arch/powerpc/boot/dts/sbc8349.dts index 2d9fa68f641..d93e5beab73 100644 --- a/arch/powerpc/boot/dts/sbc8349.dts +++ b/arch/powerpc/boot/dts/sbc8349.dts @@ -146,18 +146,6 @@ phy_type = "ulpi"; port0; }; - /* phy type (ULPI, UTMI, UTMI_WIDE, SERIAL) */ - usb@23000 { - device_type = "usb"; - compatible = "fsl-usb2-dr"; - reg = <0x23000 0x1000>; - #address-cells = <1>; - #size-cells = <0>; - interrupt-parent = <&ipic>; - interrupts = <38 0x8>; - dr_mode = "otg"; - phy_type = "ulpi"; - }; enet0: ethernet@24000 { #address-cells = <1>; -- cgit v1.2.3-70-g09d2 From 31ff09b7a60bbc80b5df941ec1a12502861b4da9 Mon Sep 17 00:00:00 2001 From: Liang Li Date: Wed, 12 Aug 2009 09:34:29 -0400 Subject: powerpc/83xx: Add localbus node and MTD partitions for SBC834x There is 8MB flash, 8kB EEPROM and 128MB SDRAM on the sbc834x local bus, so add a localbus node in DTS with MTD partitions. The recent U-boot commit fe613cdd4eb moves u-boot to the beginning of flash, hence the legacy label on the partition at the end of flash. Signed-off-by: Liang Li Signed-off-by: Yang Shi Signed-off-by: Paul Gortmaker Signed-off-by: Kumar Gala --- arch/powerpc/boot/dts/sbc8349.dts | 40 +++++++++++++++++++++++++++++++++++++++ 1 file changed, 40 insertions(+) (limited to 'arch') diff --git a/arch/powerpc/boot/dts/sbc8349.dts b/arch/powerpc/boot/dts/sbc8349.dts index d93e5beab73..b83036a8d0e 100644 --- a/arch/powerpc/boot/dts/sbc8349.dts +++ b/arch/powerpc/boot/dts/sbc8349.dts @@ -265,6 +265,46 @@ }; }; + localbus@e0005000 { + #address-cells = <2>; + #size-cells = <1>; + compatible = "fsl,mpc8349-localbus", "simple-bus"; + reg = <0xe0005000 0x1000>; + interrupts = <77 0x8>; + interrupt-parent = <&ipic>; + ranges = <0x0 0x0 0xff800000 0x00800000 /* 8MB Flash */ + 0x1 0x0 0xf8000000 0x00002000 /* 8KB EEPROM */ + 0x2 0x0 0x10000000 0x04000000 /* 64MB SDRAM */ + 0x3 0x0 0x10000000 0x04000000>; /* 64MB SDRAM */ + + flash@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "intel,28F640J3A", "cfi-flash"; + reg = <0x0 0x0 0x800000>; + bank-width = <2>; + device-width = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x00000000 0x00040000>; + read-only; + }; + + partition@40000 { + label = "user"; + reg = <0x00040000 0x006c0000>; + }; + + partition@700000 { + label = "legacy u-boot"; + reg = <0x00700000 0x00100000>; + read-only; + }; + + }; + }; + pci0: pci@e0008500 { interrupt-map-mask = <0xf800 0x0 0x0 0x7>; interrupt-map = < -- cgit v1.2.3-70-g09d2 From 58dfc497b9357ec00c879b775c02f4eab19bcecb Mon Sep 17 00:00:00 2001 From: Liang Li Date: Wed, 12 Aug 2009 09:34:30 -0400 Subject: powerpc/83xx: Fix incorrect PCI interrupt map in SBC834x DTS Allows interrupts to occur on the sbc834x. Currently PCI devices get assigned an incorrect IRQ and so the interrupt count never increases. This was tested with the 82546GB based dual port E1000 PCI-X NIC which uses two distinct IRQ lines on the one card. root@localhost:/root> cat /proc/interrupts | grep eth 17: 78 IPIC Level eth1 48: 27121 IPIC Level eth0 Signed-off-by: Liang Li Signed-off-by: Yang Shi Signed-off-by: Paul Gortmaker Signed-off-by: Kumar Gala --- arch/powerpc/boot/dts/sbc8349.dts | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/boot/dts/sbc8349.dts b/arch/powerpc/boot/dts/sbc8349.dts index b83036a8d0e..0dc90f9bd81 100644 --- a/arch/powerpc/boot/dts/sbc8349.dts +++ b/arch/powerpc/boot/dts/sbc8349.dts @@ -310,10 +310,10 @@ interrupt-map = < /* IDSEL 0x11 */ - 0x8800 0x0 0x0 0x1 &ipic 20 0x8 - 0x8800 0x0 0x0 0x2 &ipic 21 0x8 - 0x8800 0x0 0x0 0x3 &ipic 22 0x8 - 0x8800 0x0 0x0 0x4 &ipic 23 0x8>; + 0x8800 0x0 0x0 0x1 &ipic 48 0x8 + 0x8800 0x0 0x0 0x2 &ipic 17 0x8 + 0x8800 0x0 0x0 0x3 &ipic 18 0x8 + 0x8800 0x0 0x0 0x4 &ipic 19 0x8>; interrupt-parent = <&ipic>; interrupts = <0x42 0x8>; -- cgit v1.2.3-70-g09d2 From 944ac03804c4c9c0879347098ea458fd57f38687 Mon Sep 17 00:00:00 2001 From: Paul Gortmaker Date: Wed, 12 Aug 2009 09:34:31 -0400 Subject: powerpc/83xx: sbc8349 - update defconfig, enable MTD, USB storage With flash partition entries in the DTS file, MTD might as well be enabled in the defconfig. In a similar vein, enable USB and enough related options (SCSI/ext2/ext3) so that a user can read and write to a generic USB flash drive as well. Also, this board only has the two default SOC UARTs, so adjust the UART config accordingly. Signed-off-by: Paul Gortmaker Signed-off-by: Kumar Gala --- arch/powerpc/configs/83xx/sbc834x_defconfig | 320 ++++++++++++++++++++++++++-- 1 file changed, 308 insertions(+), 12 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/configs/83xx/sbc834x_defconfig b/arch/powerpc/configs/83xx/sbc834x_defconfig index a592b5efdc4..3a68f861b1b 100644 --- a/arch/powerpc/configs/83xx/sbc834x_defconfig +++ b/arch/powerpc/configs/83xx/sbc834x_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31-rc4 -# Wed Jul 29 23:32:13 2009 +# Linux kernel version: 2.6.31-rc5 +# Tue Aug 11 19:57:51 2009 # # CONFIG_PPC64 is not set @@ -420,7 +420,90 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set # CONFIG_SYS_HYPERVISOR is not set # CONFIG_CONNECTOR is not set -# CONFIG_MTD is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +CONFIG_MTD_CONCAT=y +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_TESTS is not set +# CONFIG_MTD_REDBOOT_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y +CONFIG_MTD_OF_PARTS=y +# CONFIG_MTD_AR7_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +CONFIG_MTD_CFI_INTELEXT=y +# CONFIG_MTD_CFI_AMDSTD is not set +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +# CONFIG_MTD_PHYSMAP is not set +CONFIG_MTD_PHYSMAP_OF=y +# CONFIG_MTD_INTEL_VR_NOR is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_PMC551 is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +# CONFIG_MTD_NAND is not set +# CONFIG_MTD_ONENAND is not set + +# +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set CONFIG_OF_DEVICE=y CONFIG_OF_I2C=y CONFIG_OF_MDIO=y @@ -436,6 +519,7 @@ CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_CRYPTOLOOP is not set # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_SX8 is not set +# CONFIG_BLK_DEV_UB is not set CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=32768 @@ -468,9 +552,38 @@ CONFIG_HAVE_IDE=y # SCSI device support # # CONFIG_RAID_ATTRS is not set -# CONFIG_SCSI is not set -# CONFIG_SCSI_DMA is not set +CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set # CONFIG_SCSI_NETLINK is not set +# CONFIG_SCSI_PROC_FS is not set + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +# CONFIG_CHR_DEV_SG is not set +# CONFIG_CHR_DEV_SCH is not set +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set +# CONFIG_SCSI_LOWLEVEL is not set +# CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set # CONFIG_ATA is not set # CONFIG_MD is not set # CONFIG_FUSION is not set @@ -578,11 +691,21 @@ CONFIG_GIANFAR=y # # Enable WiMAX (Networking options) to see the WiMAX drivers # + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET is not set # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set +# CONFIG_NET_FC is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set @@ -633,9 +756,9 @@ CONFIG_DEVKMEM=y # CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_PCI=y -CONFIG_SERIAL_8250_NR_UARTS=4 -CONFIG_SERIAL_8250_RUNTIME_UARTS=4 +# CONFIG_SERIAL_8250_PCI is not set +CONFIG_SERIAL_8250_NR_UARTS=2 +CONFIG_SERIAL_8250_RUNTIME_UARTS=2 # CONFIG_SERIAL_8250_EXTENDED is not set # @@ -700,6 +823,7 @@ CONFIG_I2C_MPC=y # # CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_TINY_USB is not set # # Graphics adapter I2C/DDC channel drivers @@ -814,6 +938,11 @@ CONFIG_WATCHDOG=y # # CONFIG_PCIPCWATCHDOG is not set # CONFIG_WDTPCI is not set + +# +# USB-based Watchdog Cards +# +# CONFIG_USBPCWATCHDOG is not set CONFIG_SSB_POSSIBLE=y # @@ -856,12 +985,134 @@ CONFIG_HID_SUPPORT=y CONFIG_HID=y # CONFIG_HID_DEBUG is not set # CONFIG_HIDRAW is not set + +# +# USB Input Devices +# +# CONFIG_USB_HID is not set # CONFIG_HID_PID is not set +# +# USB HID Boot Protocol drivers +# +# CONFIG_USB_KBD is not set +# CONFIG_USB_MOUSE is not set + # # Special HID drivers # -# CONFIG_USB_SUPPORT is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARCH_HAS_EHCI=y +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set +# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set + +# +# Miscellaneous USB options +# +CONFIG_USB_DEVICEFS=y +CONFIG_USB_DEVICE_CLASS=y +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_OTG is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set +CONFIG_USB_MON=y +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_C67X00_HCD is not set +# CONFIG_USB_XHCI_HCD is not set +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_EHCI_ROOT_HUB_TT=y +# CONFIG_USB_EHCI_TT_NEWSCHED is not set +CONFIG_USB_EHCI_FSL=y +CONFIG_USB_EHCI_HCD_PPC_OF=y +# CONFIG_USB_OXU210HP_HCD is not set +# CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set +# CONFIG_USB_OHCI_HCD is not set +# CONFIG_USB_UHCI_HCD is not set +# CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_WHCI_HCD is not set +# CONFIG_USB_HWA_HCD is not set + +# +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set +# CONFIG_USB_WDM is not set +# CONFIG_USB_TMC is not set + +# +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may +# + +# +# also be needed; see USB_STORAGE Help for more info +# +CONFIG_USB_STORAGE=y +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_ISD200 is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_ONETOUCH is not set +# CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set + +# +# USB port drivers +# +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_SEVSEG is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_SISUSBVGA is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_TEST is not set +# CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set +# CONFIG_USB_GADGET is not set + +# +# OTG and related infrastructure +# +# CONFIG_NOP_USB_XCEIV is not set # CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set @@ -882,9 +1133,14 @@ CONFIG_HID=y # # File systems # -# CONFIG_EXT2_FS is not set -# CONFIG_EXT3_FS is not set +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set +# CONFIG_EXT3_FS_XATTR is not set # CONFIG_EXT4_FS is not set +CONFIG_JBD=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set @@ -940,6 +1196,7 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set +# CONFIG_JFFS2_FS is not set # CONFIG_CRAMFS is not set # CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set @@ -977,7 +1234,46 @@ CONFIG_RPCSEC_GSS_KRB5=y # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y -# CONFIG_NLS is not set +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +# CONFIG_NLS_CODEPAGE_437 is not set +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +# CONFIG_NLS_ISO8859_1 is not set +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set # CONFIG_DLM is not set # CONFIG_BINARY_PRINTF is not set -- cgit v1.2.3-70-g09d2 From 7792da8567a70be3280c8eef916334e6923815e3 Mon Sep 17 00:00:00 2001 From: Liang Li Date: Fri, 14 Aug 2009 10:36:14 -0400 Subject: powerpc/85xx: sbc8560 - Fix warm reboot with board specific reset function The existing fsl_rstcr_restart function is not applicable to the mpc8560. The Global Utilities Block on this earlier CPU doesn't have the control/reset register at 0xe00b0. This implements a board specific reset function that uses the RCR(Reset Control Register) of the sbc8560's EPLD to do a reset. Signed-off-by: Liang Li Signed-off-by: Paul Gortmaker Signed-off-by: Kumar Gala --- arch/powerpc/platforms/85xx/sbc8560.c | 39 ++++++++++++++++++++++++++++++++++- 1 file changed, 38 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/powerpc/platforms/85xx/sbc8560.c b/arch/powerpc/platforms/85xx/sbc8560.c index cc27807a8b6..a5ad1c7794b 100644 --- a/arch/powerpc/platforms/85xx/sbc8560.c +++ b/arch/powerpc/platforms/85xx/sbc8560.c @@ -267,6 +267,43 @@ arch_initcall(sbc8560_rtc_init); #endif /* M48T59 */ +static __u8 __iomem *brstcr; + +static int __init sbc8560_bdrstcr_init(void) +{ + struct device_node *np; + struct resource res; + + np = of_find_compatible_node(NULL, NULL, "wrs,sbc8560-brstcr"); + if (np == NULL) { + printk(KERN_WARNING "sbc8560: No board specific RSTCR in DTB.\n"); + return -ENODEV; + } + + of_address_to_resource(np, 0, &res); + + printk(KERN_INFO "sbc8560: Found BRSTCR at i/o 0x%x\n", res.start); + + brstcr = ioremap(res.start, res.end - res.start); + if(!brstcr) + printk(KERN_WARNING "sbc8560: ioremap of brstcr failed.\n"); + + of_node_put(np); + + return 0; +} + +arch_initcall(sbc8560_bdrstcr_init); + +void sbc8560_rstcr_restart(char * cmd) +{ + local_irq_disable(); + if(brstcr) + clrbits8(brstcr, 0x80); + + while(1); +} + define_machine(sbc8560) { .name = "SBC8560", .probe = sbc8560_probe, @@ -274,7 +311,7 @@ define_machine(sbc8560) { .init_IRQ = sbc8560_pic_init, .show_cpuinfo = sbc8560_show_cpuinfo, .get_irq = mpic_get_irq, - .restart = fsl_rstcr_restart, + .restart = sbc8560_rstcr_restart, .calibrate_decr = generic_calibrate_decr, .progress = udbg_progress, }; -- cgit v1.2.3-70-g09d2 From 46c4c229ecf470202a1f4fd2402283cb038864bf Mon Sep 17 00:00:00 2001 From: Paul Gortmaker Date: Fri, 14 Aug 2009 12:13:53 -0400 Subject: powerpc/85xx: issue fsl_soc reboot warning only when applicable Some CPU, like the MPC8560 don't have a RSTCR in the Global Utilities Block. These boards will implement their own reboot call, and not use this code, so we should only warn about the absence of the GUTS RSTCR when the default reboot code is used. Signed-off-by: Paul Gortmaker Signed-off-by: Kumar Gala --- arch/powerpc/sysdev/fsl_soc.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/sysdev/fsl_soc.c b/arch/powerpc/sysdev/fsl_soc.c index 95dbc643c4f..adca4affcf1 100644 --- a/arch/powerpc/sysdev/fsl_soc.c +++ b/arch/powerpc/sysdev/fsl_soc.c @@ -37,6 +37,7 @@ #include #include #include +#include #include #include #include @@ -383,8 +384,9 @@ static int __init setup_rstcr(void) if (!rstcr) printk (KERN_EMERG "Error: reset control register " "not mapped!\n"); - } else - printk (KERN_INFO "rstcr compatible register does not exist!\n"); + } else if (ppc_md.restart == fsl_rstcr_restart) + printk(KERN_ERR "No RSTCR register, warm reboot won't work\n"); + if (np) of_node_put(np); return 0; -- cgit v1.2.3-70-g09d2 From c9c419773d2a84af8ff2f91c859d3d16592c947b Mon Sep 17 00:00:00 2001 From: Paul Gortmaker Date: Fri, 14 Aug 2009 12:13:54 -0400 Subject: powerpc/85xx: sbc8560 - remove "has-rstcr" from global utilities block The earlier mpc8560 CPUs don't have the RSTCR at 0xe00b0 in the GUTS. The generic reboot code uses this tag to determine if it should be using the RSTCR for reboot, so remove it from the board definition. Signed-off-by: Paul Gortmaker Signed-off-by: Kumar Gala --- arch/powerpc/boot/dts/sbc8560.dts | 1 - 1 file changed, 1 deletion(-) (limited to 'arch') diff --git a/arch/powerpc/boot/dts/sbc8560.dts b/arch/powerpc/boot/dts/sbc8560.dts index 239d57a55cf..9e13ed8a119 100644 --- a/arch/powerpc/boot/dts/sbc8560.dts +++ b/arch/powerpc/boot/dts/sbc8560.dts @@ -303,7 +303,6 @@ global-utilities@e0000 { compatible = "fsl,mpc8560-guts"; reg = <0xe0000 0x1000>; - fsl,has-rstcr; }; }; -- cgit v1.2.3-70-g09d2 From ec80fb2d89a0a93db46bdc968b6a849be5340531 Mon Sep 17 00:00:00 2001 From: Anton Vorontsov Date: Wed, 19 Aug 2009 03:38:18 +0400 Subject: powerpc/85xx: Add eSDHC support for MPC8536DS boards This patch simply adds sdhci node to the device tree. We specify clock-frequency manually, so that eSDHC will work without upgrading U-Boot. Though, that'll only work for default setup (1500 MHz) on new board revisions. For non-default setups, it's recommended to upgrade U-Boot, since it will fixup clock-frequency automatically. Signed-off-by: Anton Vorontsov Signed-off-by: Kumar Gala --- arch/powerpc/boot/dts/mpc8536ds.dts | 8 ++++++++ arch/powerpc/boot/dts/mpc8536ds_36b.dts | 8 ++++++++ 2 files changed, 16 insertions(+) (limited to 'arch') diff --git a/arch/powerpc/boot/dts/mpc8536ds.dts b/arch/powerpc/boot/dts/mpc8536ds.dts index 22caf69e6ef..815cebb2e3e 100644 --- a/arch/powerpc/boot/dts/mpc8536ds.dts +++ b/arch/powerpc/boot/dts/mpc8536ds.dts @@ -250,6 +250,14 @@ phy_type = "ulpi"; }; + sdhci@2e000 { + compatible = "fsl,mpc8536-esdhc", "fsl,esdhc"; + reg = <0x2e000 0x1000>; + interrupts = <72 0x2>; + interrupt-parent = <&mpic>; + clock-frequency = <250000000>; + }; + serial0: serial@4500 { cell-index = <0>; device_type = "serial"; diff --git a/arch/powerpc/boot/dts/mpc8536ds_36b.dts b/arch/powerpc/boot/dts/mpc8536ds_36b.dts index 113ed8b7c89..d95b26021e6 100644 --- a/arch/powerpc/boot/dts/mpc8536ds_36b.dts +++ b/arch/powerpc/boot/dts/mpc8536ds_36b.dts @@ -250,6 +250,14 @@ phy_type = "ulpi"; }; + sdhci@2e000 { + compatible = "fsl,mpc8536-esdhc", "fsl,esdhc"; + reg = <0x2e000 0x1000>; + interrupts = <72 0x2>; + interrupt-parent = <&mpic>; + clock-frequency = <250000000>; + }; + serial0: serial@4500 { cell-index = <0>; device_type = "serial"; -- cgit v1.2.3-70-g09d2 From a70e88bc78d220a506394058d48cedd1c491a256 Mon Sep 17 00:00:00 2001 From: Anton Vorontsov Date: Wed, 19 Aug 2009 03:28:10 +0400 Subject: powerpc/82xx: Fix BCSR bits for MPC8272ADS boards mpc8272_ads.c is using BCSR bits definitions from pq2ads.h, but according to User's Guide the bits are wrong for MPC8272ADS boards (I guess definitions from pq2ads should only be used for PQ2FADS boards). So, let's introduce our own definitions for MPC8272ADS, and don't include pq2ads.h. Signed-off-by: Anton Vorontsov Signed-off-by: Kumar Gala --- arch/powerpc/platforms/82xx/mpc8272_ads.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/powerpc/platforms/82xx/mpc8272_ads.c b/arch/powerpc/platforms/82xx/mpc8272_ads.c index 8054c685d32..67e2184f424 100644 --- a/arch/powerpc/platforms/82xx/mpc8272_ads.c +++ b/arch/powerpc/platforms/82xx/mpc8272_ads.c @@ -29,7 +29,6 @@ #include #include -#include "pq2ads.h" #include "pq2.h" static void __init mpc8272_ads_pic_init(void) @@ -144,6 +143,13 @@ static void __init mpc8272_ads_setup_arch(void) return; } +#define BCSR1_FETHIEN 0x08000000 +#define BCSR1_FETH_RST 0x04000000 +#define BCSR1_RS232_EN1 0x02000000 +#define BCSR1_RS232_EN2 0x01000000 +#define BCSR3_FETHIEN2 0x10000000 +#define BCSR3_FETH2_RST 0x08000000 + clrbits32(&bcsr[1], BCSR1_RS232_EN1 | BCSR1_RS232_EN2 | BCSR1_FETHIEN); setbits32(&bcsr[1], BCSR1_FETH_RST); -- cgit v1.2.3-70-g09d2 From 818fcac554397a04987d49e2bd2dfc2d394b265c Mon Sep 17 00:00:00 2001 From: Anton Vorontsov Date: Wed, 19 Aug 2009 03:28:17 +0400 Subject: powerpc/82xx: Add CPM USB Gadget support for MPC8272ADS boards - Add usb node; - Configure pins and clocks; - Enable USB function in BCSR. The support was successfully tested using serial and ethernet gadget drivers. Signed-off-by: Anton Vorontsov Signed-off-by: Kumar Gala --- arch/powerpc/boot/dts/mpc8272ads.dts | 8 ++++++++ arch/powerpc/platforms/82xx/mpc8272_ads.c | 14 ++++++++++++++ 2 files changed, 22 insertions(+) (limited to 'arch') diff --git a/arch/powerpc/boot/dts/mpc8272ads.dts b/arch/powerpc/boot/dts/mpc8272ads.dts index 60f332778e4..e802ebd88cb 100644 --- a/arch/powerpc/boot/dts/mpc8272ads.dts +++ b/arch/powerpc/boot/dts/mpc8272ads.dts @@ -173,6 +173,14 @@ fsl,cpm-command = <0xce00000>; }; + usb@11b60 { + compatible = "fsl,mpc8272-cpm-usb"; + reg = <0x11b60 0x40 0x8b00 0x100>; + interrupts = <11 8>; + interrupt-parent = <&PIC>; + mode = "peripheral"; + }; + mdio@10d40 { device_type = "mdio"; compatible = "fsl,mpc8272ads-mdio-bitbang", diff --git a/arch/powerpc/platforms/82xx/mpc8272_ads.c b/arch/powerpc/platforms/82xx/mpc8272_ads.c index 67e2184f424..30394b409b3 100644 --- a/arch/powerpc/platforms/82xx/mpc8272_ads.c +++ b/arch/powerpc/platforms/82xx/mpc8272_ads.c @@ -99,6 +99,15 @@ static struct cpm_pin mpc8272_ads_pins[] = { /* I2C */ {3, 14, CPM_PIN_INPUT | CPM_PIN_SECONDARY | CPM_PIN_OPENDRAIN}, {3, 15, CPM_PIN_INPUT | CPM_PIN_SECONDARY | CPM_PIN_OPENDRAIN}, + + /* USB */ + {2, 10, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, + {2, 11, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, + {2, 20, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, + {2, 24, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, + {3, 23, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, + {3, 24, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, + {3, 25, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, }; static void __init init_ioports(void) @@ -112,6 +121,8 @@ static void __init init_ioports(void) cpm2_clk_setup(CPM_CLK_SCC1, CPM_BRG1, CPM_CLK_RX); cpm2_clk_setup(CPM_CLK_SCC1, CPM_BRG1, CPM_CLK_TX); + cpm2_clk_setup(CPM_CLK_SCC3, CPM_CLK8, CPM_CLK_RX); + cpm2_clk_setup(CPM_CLK_SCC3, CPM_CLK8, CPM_CLK_TX); cpm2_clk_setup(CPM_CLK_SCC4, CPM_BRG4, CPM_CLK_RX); cpm2_clk_setup(CPM_CLK_SCC4, CPM_BRG4, CPM_CLK_TX); cpm2_clk_setup(CPM_CLK_FCC1, CPM_CLK11, CPM_CLK_RX); @@ -147,6 +158,7 @@ static void __init mpc8272_ads_setup_arch(void) #define BCSR1_FETH_RST 0x04000000 #define BCSR1_RS232_EN1 0x02000000 #define BCSR1_RS232_EN2 0x01000000 +#define BCSR3_USB_nEN 0x80000000 #define BCSR3_FETHIEN2 0x10000000 #define BCSR3_FETH2_RST 0x08000000 @@ -156,6 +168,8 @@ static void __init mpc8272_ads_setup_arch(void) clrbits32(&bcsr[3], BCSR3_FETHIEN2); setbits32(&bcsr[3], BCSR3_FETH2_RST); + clrbits32(&bcsr[3], BCSR3_USB_nEN); + iounmap(bcsr); init_ioports(); -- cgit v1.2.3-70-g09d2 From 9b9d401b8d11796f4c4bcbcabecfec9f5d85ea25 Mon Sep 17 00:00:00 2001 From: Anton Vorontsov Date: Wed, 19 Aug 2009 03:28:21 +0400 Subject: powerpc/85xx: Add QE USB support for MPC8569E-MDS boards - Add gpio-controller node for BCSR17, it is used to control USB speed and VBUS; - Add timer node for QE GTM, needed for USB host; - Add usb node itself; - Add some probing code for BCSR GPIOs. NOTE: QE USB doesn't work on prototype boards, but should work on pilot boards if specs and schematics are correct, though we don't have the pilot boards to actually test it. Signed-off-by: Anton Vorontsov Signed-off-by: Kumar Gala --- arch/powerpc/boot/dts/mpc8569mds.dts | 45 +++++++++++++++++++++++++++++++ arch/powerpc/platforms/85xx/mpc85xx_mds.c | 4 +++ 2 files changed, 49 insertions(+) (limited to 'arch') diff --git a/arch/powerpc/boot/dts/mpc8569mds.dts b/arch/powerpc/boot/dts/mpc8569mds.dts index 9e4ce99e161..06332d61830 100644 --- a/arch/powerpc/boot/dts/mpc8569mds.dts +++ b/arch/powerpc/boot/dts/mpc8569mds.dts @@ -99,8 +99,18 @@ }; bcsr@1,0 { + #address-cells = <1>; + #size-cells = <1>; compatible = "fsl,mpc8569mds-bcsr"; reg = <1 0 0x8000>; + ranges = <0 1 0 0x8000>; + + bcsr17: gpio-controller@11 { + #gpio-cells = <2>; + compatible = "fsl,mpc8569mds-bcsr-gpio"; + reg = <0x11 0x1>; + gpio-controller; + }; }; nand@3,0 { @@ -315,6 +325,14 @@ gpio-controller; }; + qe_pio_f: gpio-controller@a0 { + #gpio-cells = <2>; + compatible = "fsl,mpc8569-qe-pario-bank", + "fsl,mpc8323-qe-pario-bank"; + reg = <0xa0 0x18>; + gpio-controller; + }; + pio1: ucc_pin@01 { pio-map = < /* port pin dir open_drain assignment has_irq */ @@ -419,6 +437,16 @@ interrupt-parent = <&mpic>; }; + timer@440 { + compatible = "fsl,mpc8569-qe-gtm", + "fsl,qe-gtm", "fsl,gtm"; + reg = <0x440 0x40>; + interrupts = <12 13 14 15>; + interrupt-parent = <&qeic>; + /* Filled in by U-Boot */ + clock-frequency = <0>; + }; + spi@4c0 { #address-cells = <1>; #size-cells = <0>; @@ -446,6 +474,23 @@ mode = "cpu"; }; + usb@6c0 { + compatible = "fsl,mpc8569-qe-usb", + "fsl,mpc8323-qe-usb"; + reg = <0x6c0 0x40 0x8b00 0x100>; + interrupts = <11>; + interrupt-parent = <&qeic>; + fsl,fullspeed-clock = "clk5"; + fsl,lowspeed-clock = "brg10"; + gpios = <&qe_pio_f 3 0 /* USBOE */ + &qe_pio_f 4 0 /* USBTP */ + &qe_pio_f 5 0 /* USBTN */ + &qe_pio_f 6 0 /* USBRP */ + &qe_pio_f 8 0 /* USBRN */ + &bcsr17 6 0 /* SPEED */ + &bcsr17 5 1>; /* POWER */ + }; + enet0: ucc@2000 { device_type = "network"; compatible = "ucc_geth"; diff --git a/arch/powerpc/platforms/85xx/mpc85xx_mds.c b/arch/powerpc/platforms/85xx/mpc85xx_mds.c index bfb32834ab0..20a61d0af33 100644 --- a/arch/powerpc/platforms/85xx/mpc85xx_mds.c +++ b/arch/powerpc/platforms/85xx/mpc85xx_mds.c @@ -47,6 +47,7 @@ #include #include #include +#include #include #include #include @@ -304,6 +305,9 @@ static struct of_device_id mpc85xx_ids[] = { static int __init mpc85xx_publish_devices(void) { + if (machine_is(mpc8569_mds)) + simple_gpiochip_init("fsl,mpc8569mds-bcsr-gpio"); + /* Publish the QE devices */ of_platform_bus_probe(NULL, mpc85xx_ids, NULL); -- cgit v1.2.3-70-g09d2 From 1dcd8ffc81e80a170625883f63f6a5db3cd0428d Mon Sep 17 00:00:00 2001 From: Michael Barkowski Date: Tue, 18 Aug 2009 17:20:44 -0400 Subject: powerpc/qe_lib: Set gpio data before changing the direction to output This avoids having a short glitch if the desired initial value is not the same as what was previously in the data register. Signed-off-by: Michael Barkowski Acked-by: Anton Vorontsov Signed-off-by: Kumar Gala --- arch/powerpc/sysdev/qe_lib/gpio.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/sysdev/qe_lib/gpio.c b/arch/powerpc/sysdev/qe_lib/gpio.c index 3485288dce3..8e7a7767dd5 100644 --- a/arch/powerpc/sysdev/qe_lib/gpio.c +++ b/arch/powerpc/sysdev/qe_lib/gpio.c @@ -105,14 +105,14 @@ static int qe_gpio_dir_out(struct gpio_chip *gc, unsigned int gpio, int val) struct qe_gpio_chip *qe_gc = to_qe_gpio_chip(mm_gc); unsigned long flags; + qe_gpio_set(gc, gpio, val); + spin_lock_irqsave(&qe_gc->lock, flags); __par_io_config_pin(mm_gc->regs, gpio, QE_PIO_DIR_OUT, 0, 0, 0); spin_unlock_irqrestore(&qe_gc->lock, flags); - qe_gpio_set(gc, gpio, val); - return 0; } -- cgit v1.2.3-70-g09d2 From ea3cc330ac0cd521ff07c7cd432a1848c19a7e92 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Tue, 18 Aug 2009 19:00:34 +0000 Subject: powerpc/mm: Cleanup handling of execute permission This is an attempt at cleaning up a bit the way we handle execute permission on powerpc. _PAGE_HWEXEC is gone, _PAGE_EXEC is now only defined by CPUs that can do something with it, and the myriad of #ifdef's in the I$/D$ coherency code is reduced to 2 cases that hopefully should cover everything. The logic on BookE is a little bit different than what it was though not by much. Since now, _PAGE_EXEC will be set by the generic code for executable pages, we need to filter out if they are unclean and recover it. However, I don't expect the code to be more bloated than it already was in that area due to that change. I could boast that this brings proper enforcing of per-page execute permissions to all BookE and 40x but in fact, we've had that now for some time as a side effect of my previous rework in that area (and I didn't even know it :-) We would only enable execute permission if the page was cache clean and we would only cache clean it if we took and exec fault. Since we now enforce that the later only work if VM_EXEC is part of the VMA flags, we de-fact already enforce per-page execute permissions... Unless I missed something Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/include/asm/pgtable-ppc32.h | 7 +- arch/powerpc/include/asm/pgtable-ppc64.h | 3 +- arch/powerpc/include/asm/pte-40x.h | 2 +- arch/powerpc/include/asm/pte-44x.h | 2 +- arch/powerpc/include/asm/pte-8xx.h | 1 - arch/powerpc/include/asm/pte-book3e.h | 13 +-- arch/powerpc/include/asm/pte-common.h | 22 ++-- arch/powerpc/include/asm/pte-fsl-booke.h | 2 +- arch/powerpc/include/asm/pte-hash32.h | 1 - arch/powerpc/kernel/head_44x.S | 2 +- arch/powerpc/kernel/head_fsl_booke.S | 4 +- arch/powerpc/mm/40x_mmu.c | 4 +- arch/powerpc/mm/pgtable.c | 167 +++++++++++++++++++++---------- arch/powerpc/mm/pgtable_32.c | 2 +- arch/powerpc/mm/tlb_low_64e.S | 4 +- 15 files changed, 149 insertions(+), 87 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/include/asm/pgtable-ppc32.h b/arch/powerpc/include/asm/pgtable-ppc32.h index c9ff9d75990..f2c52e25395 100644 --- a/arch/powerpc/include/asm/pgtable-ppc32.h +++ b/arch/powerpc/include/asm/pgtable-ppc32.h @@ -186,7 +186,7 @@ static inline unsigned long pte_update(pte_t *p, #endif /* !PTE_ATOMIC_UPDATES */ #ifdef CONFIG_44x - if ((old & _PAGE_USER) && (old & _PAGE_HWEXEC)) + if ((old & _PAGE_USER) && (old & _PAGE_EXEC)) icache_44x_need_flush = 1; #endif return old; @@ -217,7 +217,7 @@ static inline unsigned long long pte_update(pte_t *p, #endif /* !PTE_ATOMIC_UPDATES */ #ifdef CONFIG_44x - if ((old & _PAGE_USER) && (old & _PAGE_HWEXEC)) + if ((old & _PAGE_USER) && (old & _PAGE_EXEC)) icache_44x_need_flush = 1; #endif return old; @@ -267,8 +267,7 @@ static inline void huge_ptep_set_wrprotect(struct mm_struct *mm, static inline void __ptep_set_access_flags(pte_t *ptep, pte_t entry) { unsigned long bits = pte_val(entry) & - (_PAGE_DIRTY | _PAGE_ACCESSED | _PAGE_RW | - _PAGE_HWEXEC | _PAGE_EXEC); + (_PAGE_DIRTY | _PAGE_ACCESSED | _PAGE_RW | _PAGE_EXEC); pte_update(ptep, 0, bits); } diff --git a/arch/powerpc/include/asm/pgtable-ppc64.h b/arch/powerpc/include/asm/pgtable-ppc64.h index 200ec2dfa03..806abe7a3fa 100644 --- a/arch/powerpc/include/asm/pgtable-ppc64.h +++ b/arch/powerpc/include/asm/pgtable-ppc64.h @@ -313,8 +313,7 @@ static inline void pte_clear(struct mm_struct *mm, unsigned long addr, static inline void __ptep_set_access_flags(pte_t *ptep, pte_t entry) { unsigned long bits = pte_val(entry) & - (_PAGE_DIRTY | _PAGE_ACCESSED | _PAGE_RW | - _PAGE_EXEC | _PAGE_HWEXEC); + (_PAGE_DIRTY | _PAGE_ACCESSED | _PAGE_RW | _PAGE_EXEC); #ifdef PTE_ATOMIC_UPDATES unsigned long old, tmp; diff --git a/arch/powerpc/include/asm/pte-40x.h b/arch/powerpc/include/asm/pte-40x.h index 07630faae02..6c3e1f4378d 100644 --- a/arch/powerpc/include/asm/pte-40x.h +++ b/arch/powerpc/include/asm/pte-40x.h @@ -46,7 +46,7 @@ #define _PAGE_RW 0x040 /* software: Writes permitted */ #define _PAGE_DIRTY 0x080 /* software: dirty page */ #define _PAGE_HWWRITE 0x100 /* hardware: Dirty & RW, set in exception */ -#define _PAGE_HWEXEC 0x200 /* hardware: EX permission */ +#define _PAGE_EXEC 0x200 /* hardware: EX permission */ #define _PAGE_ACCESSED 0x400 /* software: R: page referenced */ #define _PMD_PRESENT 0x400 /* PMD points to page of PTEs */ diff --git a/arch/powerpc/include/asm/pte-44x.h b/arch/powerpc/include/asm/pte-44x.h index 37e98bcf83e..4192b9bad90 100644 --- a/arch/powerpc/include/asm/pte-44x.h +++ b/arch/powerpc/include/asm/pte-44x.h @@ -78,7 +78,7 @@ #define _PAGE_PRESENT 0x00000001 /* S: PTE valid */ #define _PAGE_RW 0x00000002 /* S: Write permission */ #define _PAGE_FILE 0x00000004 /* S: nonlinear file mapping */ -#define _PAGE_HWEXEC 0x00000004 /* H: Execute permission */ +#define _PAGE_EXEC 0x00000004 /* H: Execute permission */ #define _PAGE_ACCESSED 0x00000008 /* S: Page referenced */ #define _PAGE_DIRTY 0x00000010 /* S: Page dirty */ #define _PAGE_SPECIAL 0x00000020 /* S: Special page */ diff --git a/arch/powerpc/include/asm/pte-8xx.h b/arch/powerpc/include/asm/pte-8xx.h index 8c6e3125103..94e979718dc 100644 --- a/arch/powerpc/include/asm/pte-8xx.h +++ b/arch/powerpc/include/asm/pte-8xx.h @@ -36,7 +36,6 @@ /* These five software bits must be masked out when the entry is loaded * into the TLB. */ -#define _PAGE_EXEC 0x0008 /* software: i-cache coherency required */ #define _PAGE_GUARDED 0x0010 /* software: guarded access */ #define _PAGE_DIRTY 0x0020 /* software: page changed */ #define _PAGE_RW 0x0040 /* software: user write access allowed */ diff --git a/arch/powerpc/include/asm/pte-book3e.h b/arch/powerpc/include/asm/pte-book3e.h index 1d27c77d770..9800565aebb 100644 --- a/arch/powerpc/include/asm/pte-book3e.h +++ b/arch/powerpc/include/asm/pte-book3e.h @@ -37,12 +37,13 @@ #define _PAGE_WRITETHRU 0x800000 /* W: cache write-through */ /* "Higher level" linux bit combinations */ -#define _PAGE_EXEC _PAGE_BAP_SX /* Can be executed from potentially */ -#define _PAGE_HWEXEC _PAGE_BAP_UX /* .. and was cache cleaned */ -#define _PAGE_RW (_PAGE_BAP_SW | _PAGE_BAP_UW) /* User write permission */ -#define _PAGE_KERNEL_RW (_PAGE_BAP_SW | _PAGE_BAP_SR | _PAGE_DIRTY) -#define _PAGE_KERNEL_RO (_PAGE_BAP_SR) -#define _PAGE_USER (_PAGE_BAP_UR | _PAGE_BAP_SR) /* Can be read */ +#define _PAGE_EXEC _PAGE_BAP_UX /* .. and was cache cleaned */ +#define _PAGE_RW (_PAGE_BAP_SW | _PAGE_BAP_UW) /* User write permission */ +#define _PAGE_KERNEL_RW (_PAGE_BAP_SW | _PAGE_BAP_SR | _PAGE_DIRTY) +#define _PAGE_KERNEL_RO (_PAGE_BAP_SR) +#define _PAGE_KERNEL_RWX (_PAGE_BAP_SW | _PAGE_BAP_SR | _PAGE_DIRTY | _PAGE_BAP_SX) +#define _PAGE_KERNEL_ROX (_PAGE_BAP_SR | _PAGE_BAP_SX) +#define _PAGE_USER (_PAGE_BAP_UR | _PAGE_BAP_SR) /* Can be read */ #define _PAGE_HASHPTE 0 #define _PAGE_BUSY 0 diff --git a/arch/powerpc/include/asm/pte-common.h b/arch/powerpc/include/asm/pte-common.h index 8bb6464ba61..c3b65076a26 100644 --- a/arch/powerpc/include/asm/pte-common.h +++ b/arch/powerpc/include/asm/pte-common.h @@ -13,9 +13,6 @@ #ifndef _PAGE_HWWRITE #define _PAGE_HWWRITE 0 #endif -#ifndef _PAGE_HWEXEC -#define _PAGE_HWEXEC 0 -#endif #ifndef _PAGE_EXEC #define _PAGE_EXEC 0 #endif @@ -48,10 +45,16 @@ #define PMD_PAGE_SIZE(pmd) bad_call_to_PMD_PAGE_SIZE() #endif #ifndef _PAGE_KERNEL_RO -#define _PAGE_KERNEL_RO 0 +#define _PAGE_KERNEL_RO 0 +#endif +#ifndef _PAGE_KERNEL_ROX +#define _PAGE_KERNEL_ROX (_PAGE_EXEC) #endif #ifndef _PAGE_KERNEL_RW -#define _PAGE_KERNEL_RW (_PAGE_DIRTY | _PAGE_RW | _PAGE_HWWRITE) +#define _PAGE_KERNEL_RW (_PAGE_DIRTY | _PAGE_RW | _PAGE_HWWRITE) +#endif +#ifndef _PAGE_KERNEL_RWX +#define _PAGE_KERNEL_RWX (_PAGE_DIRTY | _PAGE_RW | _PAGE_HWWRITE | _PAGE_EXEC) #endif #ifndef _PAGE_HPTEFLAGS #define _PAGE_HPTEFLAGS _PAGE_HASHPTE @@ -96,8 +99,7 @@ extern unsigned long bad_call_to_PMD_PAGE_SIZE(void); #define PAGE_PROT_BITS (_PAGE_GUARDED | _PAGE_COHERENT | _PAGE_NO_CACHE | \ _PAGE_WRITETHRU | _PAGE_ENDIAN | _PAGE_4K_PFN | \ _PAGE_USER | _PAGE_ACCESSED | \ - _PAGE_RW | _PAGE_HWWRITE | _PAGE_DIRTY | \ - _PAGE_EXEC | _PAGE_HWEXEC) + _PAGE_RW | _PAGE_HWWRITE | _PAGE_DIRTY | _PAGE_EXEC) /* * We define 2 sets of base prot bits, one for basic pages (ie, @@ -154,11 +156,9 @@ extern unsigned long bad_call_to_PMD_PAGE_SIZE(void); _PAGE_NO_CACHE) #define PAGE_KERNEL_NCG __pgprot(_PAGE_BASE_NC | _PAGE_KERNEL_RW | \ _PAGE_NO_CACHE | _PAGE_GUARDED) -#define PAGE_KERNEL_X __pgprot(_PAGE_BASE | _PAGE_KERNEL_RW | _PAGE_EXEC | \ - _PAGE_HWEXEC) +#define PAGE_KERNEL_X __pgprot(_PAGE_BASE | _PAGE_KERNEL_RWX) #define PAGE_KERNEL_RO __pgprot(_PAGE_BASE | _PAGE_KERNEL_RO) -#define PAGE_KERNEL_ROX __pgprot(_PAGE_BASE | _PAGE_KERNEL_RO | _PAGE_EXEC | \ - _PAGE_HWEXEC) +#define PAGE_KERNEL_ROX __pgprot(_PAGE_BASE | _PAGE_KERNEL_ROX) /* Protection used for kernel text. We want the debuggers to be able to * set breakpoints anywhere, so don't write protect the kernel text diff --git a/arch/powerpc/include/asm/pte-fsl-booke.h b/arch/powerpc/include/asm/pte-fsl-booke.h index 10820f58acf..ce8a9e94ce7 100644 --- a/arch/powerpc/include/asm/pte-fsl-booke.h +++ b/arch/powerpc/include/asm/pte-fsl-booke.h @@ -23,7 +23,7 @@ #define _PAGE_FILE 0x00002 /* S: when !present: nonlinear file mapping */ #define _PAGE_RW 0x00004 /* S: Write permission (SW) */ #define _PAGE_DIRTY 0x00008 /* S: Page dirty */ -#define _PAGE_HWEXEC 0x00010 /* H: SX permission */ +#define _PAGE_EXEC 0x00010 /* H: SX permission */ #define _PAGE_ACCESSED 0x00020 /* S: Page referenced */ #define _PAGE_ENDIAN 0x00040 /* H: E bit */ diff --git a/arch/powerpc/include/asm/pte-hash32.h b/arch/powerpc/include/asm/pte-hash32.h index 16e571c7f9e..4aad4132d0a 100644 --- a/arch/powerpc/include/asm/pte-hash32.h +++ b/arch/powerpc/include/asm/pte-hash32.h @@ -26,7 +26,6 @@ #define _PAGE_WRITETHRU 0x040 /* W: cache write-through */ #define _PAGE_DIRTY 0x080 /* C: page changed */ #define _PAGE_ACCESSED 0x100 /* R: page referenced */ -#define _PAGE_EXEC 0x200 /* software: i-cache coherency required */ #define _PAGE_RW 0x400 /* software: user write access allowed */ #define _PAGE_SPECIAL 0x800 /* software: Special page */ diff --git a/arch/powerpc/kernel/head_44x.S b/arch/powerpc/kernel/head_44x.S index 656cfb2d666..711368b993f 100644 --- a/arch/powerpc/kernel/head_44x.S +++ b/arch/powerpc/kernel/head_44x.S @@ -497,7 +497,7 @@ tlb_44x_patch_hwater_D: mtspr SPRN_MMUCR,r12 /* Make up the required permissions */ - li r13,_PAGE_PRESENT | _PAGE_ACCESSED | _PAGE_HWEXEC + li r13,_PAGE_PRESENT | _PAGE_ACCESSED | _PAGE_EXEC /* Compute pgdir/pmd offset */ rlwinm r12, r10, PPC44x_PGD_OFF_SHIFT, PPC44x_PGD_OFF_MASK_BIT, 29 diff --git a/arch/powerpc/kernel/head_fsl_booke.S b/arch/powerpc/kernel/head_fsl_booke.S index eca80482ae7..2c5af525647 100644 --- a/arch/powerpc/kernel/head_fsl_booke.S +++ b/arch/powerpc/kernel/head_fsl_booke.S @@ -643,7 +643,7 @@ interrupt_base: 4: /* Make up the required permissions */ - li r13,_PAGE_PRESENT | _PAGE_ACCESSED | _PAGE_HWEXEC + li r13,_PAGE_PRESENT | _PAGE_ACCESSED | _PAGE_EXEC FIND_PTE andc. r13,r13,r11 /* Check permission */ @@ -742,7 +742,7 @@ finish_tlb_load: #endif mtspr SPRN_MAS2, r12 - li r10, (_PAGE_HWEXEC | _PAGE_PRESENT) + li r10, (_PAGE_EXEC | _PAGE_PRESENT) rlwimi r10, r11, 31, 29, 29 /* extract _PAGE_DIRTY into SW */ and r12, r11, r10 andi. r10, r11, _PAGE_USER /* Test for _PAGE_USER */ diff --git a/arch/powerpc/mm/40x_mmu.c b/arch/powerpc/mm/40x_mmu.c index 29954dc2894..f5e7b9ce63d 100644 --- a/arch/powerpc/mm/40x_mmu.c +++ b/arch/powerpc/mm/40x_mmu.c @@ -105,7 +105,7 @@ unsigned long __init mmu_mapin_ram(void) while (s >= LARGE_PAGE_SIZE_16M) { pmd_t *pmdp; - unsigned long val = p | _PMD_SIZE_16M | _PAGE_HWEXEC | _PAGE_HWWRITE; + unsigned long val = p | _PMD_SIZE_16M | _PAGE_EXEC | _PAGE_HWWRITE; pmdp = pmd_offset(pud_offset(pgd_offset_k(v), v), v); pmd_val(*pmdp++) = val; @@ -120,7 +120,7 @@ unsigned long __init mmu_mapin_ram(void) while (s >= LARGE_PAGE_SIZE_4M) { pmd_t *pmdp; - unsigned long val = p | _PMD_SIZE_4M | _PAGE_HWEXEC | _PAGE_HWWRITE; + unsigned long val = p | _PMD_SIZE_4M | _PAGE_EXEC | _PAGE_HWWRITE; pmdp = pmd_offset(pud_offset(pgd_offset_k(v), v), v); pmd_val(*pmdp) = val; diff --git a/arch/powerpc/mm/pgtable.c b/arch/powerpc/mm/pgtable.c index b6b32487e74..83f1551ec2c 100644 --- a/arch/powerpc/mm/pgtable.c +++ b/arch/powerpc/mm/pgtable.c @@ -128,28 +128,6 @@ void pte_free_finish(void) #endif /* CONFIG_SMP */ -/* - * Handle i/d cache flushing, called from set_pte_at() or ptep_set_access_flags() - */ -static pte_t do_dcache_icache_coherency(pte_t pte) -{ - unsigned long pfn = pte_pfn(pte); - struct page *page; - - if (unlikely(!pfn_valid(pfn))) - return pte; - page = pfn_to_page(pfn); - - if (!PageReserved(page) && !test_bit(PG_arch_1, &page->flags)) { - pr_devel("do_dcache_icache_coherency... flushing\n"); - flush_dcache_icache_page(page); - set_bit(PG_arch_1, &page->flags); - } - else - pr_devel("do_dcache_icache_coherency... already clean\n"); - return __pte(pte_val(pte) | _PAGE_HWEXEC); -} - static inline int is_exec_fault(void) { return current->thread.regs && TRAP(current->thread.regs) == 0x400; @@ -157,49 +135,139 @@ static inline int is_exec_fault(void) /* We only try to do i/d cache coherency on stuff that looks like * reasonably "normal" PTEs. We currently require a PTE to be present - * and we avoid _PAGE_SPECIAL and _PAGE_NO_CACHE + * and we avoid _PAGE_SPECIAL and _PAGE_NO_CACHE. We also only do that + * on userspace PTEs */ static inline int pte_looks_normal(pte_t pte) { return (pte_val(pte) & - (_PAGE_PRESENT | _PAGE_SPECIAL | _PAGE_NO_CACHE)) == - (_PAGE_PRESENT); + (_PAGE_PRESENT | _PAGE_SPECIAL | _PAGE_NO_CACHE | _PAGE_USER)) == + (_PAGE_PRESENT | _PAGE_USER); } -#if defined(CONFIG_PPC_STD_MMU) +struct page * maybe_pte_to_page(pte_t pte) +{ + unsigned long pfn = pte_pfn(pte); + struct page *page; + + if (unlikely(!pfn_valid(pfn))) + return NULL; + page = pfn_to_page(pfn); + if (PageReserved(page)) + return NULL; + return page; +} + +#if defined(CONFIG_PPC_STD_MMU) || _PAGE_EXEC == 0 + /* Server-style MMU handles coherency when hashing if HW exec permission - * is supposed per page (currently 64-bit only). Else, we always flush - * valid PTEs in set_pte. + * is supposed per page (currently 64-bit only). If not, then, we always + * flush the cache for valid PTEs in set_pte. Embedded CPU without HW exec + * support falls into the same category. */ -static inline int pte_need_exec_flush(pte_t pte, int set_pte) + +static pte_t set_pte_filter(pte_t pte) { - return set_pte && pte_looks_normal(pte) && - !(cpu_has_feature(CPU_FTR_COHERENT_ICACHE) || - cpu_has_feature(CPU_FTR_NOEXECUTE)); + pte = __pte(pte_val(pte) & ~_PAGE_HPTEFLAGS); + if (pte_looks_normal(pte) && !(cpu_has_feature(CPU_FTR_COHERENT_ICACHE) || + cpu_has_feature(CPU_FTR_NOEXECUTE))) { + struct page *pg = maybe_pte_to_page(pte); + if (!pg) + return pte; + if (!test_bit(PG_arch_1, &pg->flags)) { + flush_dcache_icache_page(pg); + set_bit(PG_arch_1, &pg->flags); + } + } + return pte; } -#elif _PAGE_HWEXEC == 0 -/* Embedded type MMU without HW exec support (8xx only so far), we flush - * the cache for any present PTE - */ -static inline int pte_need_exec_flush(pte_t pte, int set_pte) + +static pte_t set_access_flags_filter(pte_t pte, struct vm_area_struct *vma, + int dirty) { - return set_pte && pte_looks_normal(pte); + return pte; } -#else -/* Other embedded CPUs with HW exec support per-page, we flush on exec - * fault if HWEXEC is not set + +#else /* defined(CONFIG_PPC_STD_MMU) || _PAGE_EXEC == 0 */ + +/* Embedded type MMU with HW exec support. This is a bit more complicated + * as we don't have two bits to spare for _PAGE_EXEC and _PAGE_HWEXEC so + * instead we "filter out" the exec permission for non clean pages. */ -static inline int pte_need_exec_flush(pte_t pte, int set_pte) +static pte_t set_pte_filter(pte_t pte) { - return pte_looks_normal(pte) && is_exec_fault() && - !(pte_val(pte) & _PAGE_HWEXEC); + struct page *pg; + + /* No exec permission in the first place, move on */ + if (!(pte_val(pte) & _PAGE_EXEC) || !pte_looks_normal(pte)) + return pte; + + /* If you set _PAGE_EXEC on weird pages you're on your own */ + pg = maybe_pte_to_page(pte); + if (unlikely(!pg)) + return pte; + + /* If the page clean, we move on */ + if (test_bit(PG_arch_1, &pg->flags)) + return pte; + + /* If it's an exec fault, we flush the cache and make it clean */ + if (is_exec_fault()) { + flush_dcache_icache_page(pg); + set_bit(PG_arch_1, &pg->flags); + return pte; + } + + /* Else, we filter out _PAGE_EXEC */ + return __pte(pte_val(pte) & ~_PAGE_EXEC); } -#endif + +static pte_t set_access_flags_filter(pte_t pte, struct vm_area_struct *vma, + int dirty) +{ + struct page *pg; + + /* So here, we only care about exec faults, as we use them + * to recover lost _PAGE_EXEC and perform I$/D$ coherency + * if necessary. Also if _PAGE_EXEC is already set, same deal, + * we just bail out + */ + if (dirty || (pte_val(pte) & _PAGE_EXEC) || !is_exec_fault()) + return pte; + +#ifdef CONFIG_DEBUG_VM + /* So this is an exec fault, _PAGE_EXEC is not set. If it was + * an error we would have bailed out earlier in do_page_fault() + * but let's make sure of it + */ + if (WARN_ON(!(vma->vm_flags & VM_EXEC))) + return pte; +#endif /* CONFIG_DEBUG_VM */ + + /* If you set _PAGE_EXEC on weird pages you're on your own */ + pg = maybe_pte_to_page(pte); + if (unlikely(!pg)) + goto bail; + + /* If the page is already clean, we move on */ + if (test_bit(PG_arch_1, &pg->flags)) + goto bail; + + /* Clean the page and set PG_arch_1 */ + flush_dcache_icache_page(pg); + set_bit(PG_arch_1, &pg->flags); + + bail: + return __pte(pte_val(pte) | _PAGE_EXEC); +} + +#endif /* !(defined(CONFIG_PPC_STD_MMU) || _PAGE_EXEC == 0) */ /* * set_pte stores a linux PTE into the linux page table. */ -void set_pte_at(struct mm_struct *mm, unsigned long addr, pte_t *ptep, pte_t pte) +void set_pte_at(struct mm_struct *mm, unsigned long addr, pte_t *ptep, + pte_t pte) { #ifdef CONFIG_DEBUG_VM WARN_ON(pte_present(*ptep)); @@ -208,9 +276,7 @@ void set_pte_at(struct mm_struct *mm, unsigned long addr, pte_t *ptep, pte_t pte * this context might not have been activated yet when this * is called. */ - pte = __pte(pte_val(pte) & ~_PAGE_HPTEFLAGS); - if (pte_need_exec_flush(pte, 1)) - pte = do_dcache_icache_coherency(pte); + pte = set_pte_filter(pte); /* Perform the setting of the PTE */ __set_pte_at(mm, addr, ptep, pte, 0); @@ -227,8 +293,7 @@ int ptep_set_access_flags(struct vm_area_struct *vma, unsigned long address, pte_t *ptep, pte_t entry, int dirty) { int changed; - if (!dirty && pte_need_exec_flush(entry, 0)) - entry = do_dcache_icache_coherency(entry); + entry = set_access_flags_filter(entry, vma, dirty); changed = !pte_same(*(ptep), entry); if (changed) { if (!(vma->vm_flags & VM_HUGETLB)) diff --git a/arch/powerpc/mm/pgtable_32.c b/arch/powerpc/mm/pgtable_32.c index 5422169626b..cb96cb2e17c 100644 --- a/arch/powerpc/mm/pgtable_32.c +++ b/arch/powerpc/mm/pgtable_32.c @@ -142,7 +142,7 @@ ioremap_flags(phys_addr_t addr, unsigned long size, unsigned long flags) flags |= _PAGE_DIRTY | _PAGE_HWWRITE; /* we don't want to let _PAGE_USER and _PAGE_EXEC leak out */ - flags &= ~(_PAGE_USER | _PAGE_EXEC | _PAGE_HWEXEC); + flags &= ~(_PAGE_USER | _PAGE_EXEC); return __ioremap_caller(addr, size, flags, __builtin_return_address(0)); } diff --git a/arch/powerpc/mm/tlb_low_64e.S b/arch/powerpc/mm/tlb_low_64e.S index 10d524ded7b..cd92f62f9cf 100644 --- a/arch/powerpc/mm/tlb_low_64e.S +++ b/arch/powerpc/mm/tlb_low_64e.S @@ -133,7 +133,7 @@ /* We do the user/kernel test for the PID here along with the RW test */ - li r11,_PAGE_PRESENT|_PAGE_HWEXEC /* Base perm */ + li r11,_PAGE_PRESENT|_PAGE_EXEC /* Base perm */ oris r11,r11,_PAGE_ACCESSED@h cmpldi cr0,r15,0 /* Check for user region */ @@ -256,7 +256,7 @@ normal_tlb_miss_done: normal_tlb_miss_access_fault: /* We need to check if it was an instruction miss */ - andi. r10,r11,_PAGE_HWEXEC + andi. r10,r11,_PAGE_EXEC bne 1f ld r14,EX_TLB_DEAR(r12) ld r15,EX_TLB_ESR(r12) -- cgit v1.2.3-70-g09d2 From 14d757520a08d09745c3b18bb34addd9bef56e2d Mon Sep 17 00:00:00 2001 From: Josh Boyer Date: Wed, 19 Aug 2009 04:27:53 +0000 Subject: powerpc: Fix __flush_icache_range on 44x The ptrace POKETEXT interface allows a process to modify the text pages of a child process being ptraced, usually to insert breakpoints via trap instructions. The kernel eventually calls copy_to_user_page, which in turn calls __flush_icache_range to invalidate the icache lines for the child process. However, this function does not work on 44x due to the icache being virtually indexed. This was noticed by a breakpoint being triggered after it had been cleared by ltrace on a 440EPx board. The convenient solution is to do a flash invalidate of the icache in the __flush_icache_range function. Signed-off-by: Josh Boyer Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/misc_32.S | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'arch') diff --git a/arch/powerpc/kernel/misc_32.S b/arch/powerpc/kernel/misc_32.S index 15f28e0de78..da9c0c4c10f 100644 --- a/arch/powerpc/kernel/misc_32.S +++ b/arch/powerpc/kernel/misc_32.S @@ -342,10 +342,17 @@ END_FTR_SECTION_IFSET(CPU_FTR_COHERENT_ICACHE) addi r3,r3,L1_CACHE_BYTES bdnz 1b sync /* wait for dcbst's to get to ram */ +#ifndef CONFIG_44x mtctr r4 2: icbi 0,r6 addi r6,r6,L1_CACHE_BYTES bdnz 2b +#else + /* Flash invalidate on 44x because we are passed kmapped addresses and + this doesn't work for userspace pages due to the virtually tagged + icache. Sigh. */ + iccci 0, r0 +#endif sync /* additional sync needed on g4 */ isync blr -- cgit v1.2.3-70-g09d2 From 6fdc31a2b86cf1f98e3eed896578ad9659eeb0f8 Mon Sep 17 00:00:00 2001 From: Bastian Blank Date: Wed, 12 Aug 2009 23:30:45 +0000 Subject: powerpc: Remove SMP warning from PowerMac cpufreq On Thu, Aug 13, 2009 at 04:14:58PM +1000, Benjamin Herrenschmidt wrote: > On Tue, 2009-08-11 at 11:39 +0200, Bastian Blank wrote: > > This patch just disables this driver on SMP kernels, as it is obviously > > not supported. > Why not remove the #error instead ? :-) I don't think it's still > meaningful, especially since we use the timebase for delays nowadays > which doesn't depend on the CPU frequency... Your call. Take this one: The build of a PowerMac 32bit kernel currently fails with error: #warning "WARNING, CPUFREQ not recommended on SMP kernels" Thie patch removes the not longer applicable SMP warning from the PowerMac cpufreq code. Signed-off-by: Bastian Blank Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/platforms/powermac/cpufreq_32.c | 8 -------- 1 file changed, 8 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/platforms/powermac/cpufreq_32.c b/arch/powerpc/platforms/powermac/cpufreq_32.c index 65c585b8b00..08d94e4cedd 100644 --- a/arch/powerpc/platforms/powermac/cpufreq_32.c +++ b/arch/powerpc/platforms/powermac/cpufreq_32.c @@ -44,14 +44,6 @@ */ #undef DEBUG_FREQ -/* - * There is a problem with the core cpufreq code on SMP kernels, - * it won't recalculate the Bogomips properly - */ -#ifdef CONFIG_SMP -#warning "WARNING, CPUFREQ not recommended on SMP kernels" -#endif - extern void low_choose_7447a_dfs(int dfs); extern void low_choose_750fx_pll(int pll); extern void low_sleep_handler(void); -- cgit v1.2.3-70-g09d2 From 6776426320e151051a16bc7bf86f12d310c9e8ca Mon Sep 17 00:00:00 2001 From: Gautham R Shenoy Date: Tue, 23 Jun 2009 23:26:37 +0000 Subject: powerpc/pseries: Reduce the polling interval in __cpu_up() Time time taken for a single cpu online operation on a pseries machine is as follows: Dedicated LPAR (POWER6): ~220ms. Shared LPAR (POWER5) : ~240ms. Of this time, approximately 200ms is taken up by __cpu_up(). This is because we poll every 200ms to check if the new cpu has notified it's presence through the cpu_callin_map. We repeat this operation until the new cpu sets the value in cpu_callin_map or 5 seconds elapse, whichever comes earlier. However, using completion_structs instead of polling loops, the time taken by the new processor to indicate it's presence has found to be less than 1ms on pseries. This method however may not work on all powerpc platforms due to the time-base synchronization code. Keeping this in mind, we could reduce msleep polling interval from 200ms to 1ms while retaining the 5 second timeout. With this, the time taken for a cpu online operation changes as follows: Dedicated LPAR (POWER6): 20-25ms. Shared LPAR (POWER5) : 60-80ms. In both these cases, it was found that the code polls through the loop only once indicating that 1ms is a reasonable value, atleast on pseries. The code needs testing on other powerpc platforms. Signed-off-by: Gautham R Shenoy Acked-by: Joel Schopp Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/smp.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/kernel/smp.c b/arch/powerpc/kernel/smp.c index 0b47de07302..96f107cc016 100644 --- a/arch/powerpc/kernel/smp.c +++ b/arch/powerpc/kernel/smp.c @@ -412,9 +412,8 @@ int __cpuinit __cpu_up(unsigned int cpu) * CPUs can take much longer to come up in the * hotplug case. Wait five seconds. */ - for (c = 25; c && !cpu_callin_map[cpu]; c--) { - msleep(200); - } + for (c = 5000; c && !cpu_callin_map[cpu]; c--) + msleep(1); #endif if (!cpu_callin_map[cpu]) { -- cgit v1.2.3-70-g09d2 From 762afb7317b1987fa0851135fe4f2947f68c3c2a Mon Sep 17 00:00:00 2001 From: FUJITA Tomonori Date: Tue, 4 Aug 2009 19:08:22 +0000 Subject: powerpc: Remove addr_needs_map in struct dma_mapping_ops This patch adds max_direct_dma_addr to struct dev_archdata to remove addr_needs_map in struct dma_mapping_ops. It also converts dma_capable() to use max_direct_dma_addr. max_direct_dma_addr is initialized in pci_dma_dev_setup_swiotlb(), called via ppc_md.pci_dma_dev_setup hook. For further information: http://marc.info/?t=124719060200001&r=1&w=2 Signed-off-by: FUJITA Tomonori Acked-by: Becky Bruce Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/include/asm/device.h | 3 +++ arch/powerpc/include/asm/dma-mapping.h | 8 +++---- arch/powerpc/include/asm/swiotlb.h | 5 ++--- arch/powerpc/kernel/dma-swiotlb.c | 36 +++++++++++++----------------- arch/powerpc/platforms/85xx/mpc8536_ds.c | 1 + arch/powerpc/platforms/85xx/mpc85xx_ds.c | 1 + arch/powerpc/platforms/85xx/mpc85xx_mds.c | 1 + arch/powerpc/platforms/86xx/mpc86xx_hpcn.c | 1 + 8 files changed, 28 insertions(+), 28 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/include/asm/device.h b/arch/powerpc/include/asm/device.h index 7d2277cef09..0086f8d46f1 100644 --- a/arch/powerpc/include/asm/device.h +++ b/arch/powerpc/include/asm/device.h @@ -16,6 +16,9 @@ struct dev_archdata { /* DMA operations on that device */ struct dma_mapping_ops *dma_ops; void *dma_data; +#ifdef CONFIG_SWIOTLB + dma_addr_t max_direct_dma_addr; +#endif }; static inline void dev_archdata_set_node(struct dev_archdata *ad, diff --git a/arch/powerpc/include/asm/dma-mapping.h b/arch/powerpc/include/asm/dma-mapping.h index 0c34371ec49..1765c379138 100644 --- a/arch/powerpc/include/asm/dma-mapping.h +++ b/arch/powerpc/include/asm/dma-mapping.h @@ -87,8 +87,6 @@ struct dma_mapping_ops { dma_addr_t dma_address, size_t size, enum dma_data_direction direction, struct dma_attrs *attrs); - int (*addr_needs_map)(struct device *dev, dma_addr_t addr, - size_t size); #ifdef CONFIG_PPC_NEED_DMA_SYNC_OPS void (*sync_single_range_for_cpu)(struct device *hwdev, dma_addr_t dma_handle, unsigned long offset, @@ -426,10 +424,12 @@ static inline int dma_mapping_error(struct device *dev, dma_addr_t dma_addr) static inline bool dma_capable(struct device *dev, dma_addr_t addr, size_t size) { - struct dma_mapping_ops *ops = get_dma_ops(dev); +#ifdef CONFIG_SWIOTLB + struct dev_archdata *sd = &dev->archdata; - if (ops->addr_needs_map && ops->addr_needs_map(dev, addr, size)) + if (sd->max_direct_dma_addr && addr + size > sd->max_direct_dma_addr) return 0; +#endif if (!dev->dma_mask) return 0; diff --git a/arch/powerpc/include/asm/swiotlb.h b/arch/powerpc/include/asm/swiotlb.h index 30891d6e2bc..31e0e43c880 100644 --- a/arch/powerpc/include/asm/swiotlb.h +++ b/arch/powerpc/include/asm/swiotlb.h @@ -16,12 +16,11 @@ extern struct dma_mapping_ops swiotlb_dma_ops; extern struct dma_mapping_ops swiotlb_pci_dma_ops; -int swiotlb_arch_address_needs_mapping(struct device *, dma_addr_t, - size_t size); - static inline void dma_mark_clean(void *addr, size_t size) {} extern unsigned int ppc_swiotlb_enable; int __init swiotlb_setup_bus_notifier(void); +extern void pci_dma_dev_setup_swiotlb(struct pci_dev *pdev); + #endif /* __ASM_SWIOTLB_H */ diff --git a/arch/powerpc/kernel/dma-swiotlb.c b/arch/powerpc/kernel/dma-swiotlb.c index e8a57de85bc..c9f6a302e87 100644 --- a/arch/powerpc/kernel/dma-swiotlb.c +++ b/arch/powerpc/kernel/dma-swiotlb.c @@ -24,26 +24,6 @@ int swiotlb __read_mostly; unsigned int ppc_swiotlb_enable; -/* - * Determine if an address is reachable by a pci device, or if we must bounce. - */ -static int -swiotlb_pci_addr_needs_map(struct device *hwdev, dma_addr_t addr, size_t size) -{ - dma_addr_t max; - struct pci_controller *hose; - struct pci_dev *pdev = to_pci_dev(hwdev); - - hose = pci_bus_to_host(pdev->bus); - max = hose->dma_window_base_cur + hose->dma_window_size; - - /* check that we're within mapped pci window space */ - if ((addr + size > max) | (addr < hose->dma_window_base_cur)) - return 1; - - return 0; -} - /* * At the moment, all platforms that use this code only require * swiotlb to be used if we're operating on HIGHMEM. Since @@ -73,22 +53,36 @@ struct dma_mapping_ops swiotlb_pci_dma_ops = { .dma_supported = swiotlb_dma_supported, .map_page = swiotlb_map_page, .unmap_page = swiotlb_unmap_page, - .addr_needs_map = swiotlb_pci_addr_needs_map, .sync_single_range_for_cpu = swiotlb_sync_single_range_for_cpu, .sync_single_range_for_device = swiotlb_sync_single_range_for_device, .sync_sg_for_cpu = swiotlb_sync_sg_for_cpu, .sync_sg_for_device = swiotlb_sync_sg_for_device }; +void pci_dma_dev_setup_swiotlb(struct pci_dev *pdev) +{ + struct pci_controller *hose; + struct dev_archdata *sd; + + hose = pci_bus_to_host(pdev->bus); + sd = &pdev->dev.archdata; + sd->max_direct_dma_addr = + hose->dma_window_base_cur + hose->dma_window_size; +} + static int ppc_swiotlb_bus_notify(struct notifier_block *nb, unsigned long action, void *data) { struct device *dev = data; + struct dev_archdata *sd; /* We are only intereted in device addition */ if (action != BUS_NOTIFY_ADD_DEVICE) return 0; + sd = &dev->archdata; + sd->max_direct_dma_addr = 0; + /* May need to bounce if the device can't address all of DRAM */ if (dma_get_mask(dev) < lmb_end_of_DRAM()) set_dma_ops(dev, &swiotlb_dma_ops); diff --git a/arch/powerpc/platforms/85xx/mpc8536_ds.c b/arch/powerpc/platforms/85xx/mpc8536_ds.c index 055ff417bae..bf052c05610 100644 --- a/arch/powerpc/platforms/85xx/mpc8536_ds.c +++ b/arch/powerpc/platforms/85xx/mpc8536_ds.c @@ -97,6 +97,7 @@ static void __init mpc8536_ds_setup_arch(void) if (lmb_end_of_DRAM() > max) { ppc_swiotlb_enable = 1; set_pci_dma_ops(&swiotlb_pci_dma_ops); + ppc_md.pci_dma_dev_setup = pci_dma_dev_setup_swiotlb; } #endif diff --git a/arch/powerpc/platforms/85xx/mpc85xx_ds.c b/arch/powerpc/platforms/85xx/mpc85xx_ds.c index 849c0ac0025..c6f92ccd963 100644 --- a/arch/powerpc/platforms/85xx/mpc85xx_ds.c +++ b/arch/powerpc/platforms/85xx/mpc85xx_ds.c @@ -193,6 +193,7 @@ static void __init mpc85xx_ds_setup_arch(void) if (lmb_end_of_DRAM() > max) { ppc_swiotlb_enable = 1; set_pci_dma_ops(&swiotlb_pci_dma_ops); + ppc_md.pci_dma_dev_setup = pci_dma_dev_setup_swiotlb; } #endif diff --git a/arch/powerpc/platforms/85xx/mpc85xx_mds.c b/arch/powerpc/platforms/85xx/mpc85xx_mds.c index 20a61d0af33..25998b661f2 100644 --- a/arch/powerpc/platforms/85xx/mpc85xx_mds.c +++ b/arch/powerpc/platforms/85xx/mpc85xx_mds.c @@ -256,6 +256,7 @@ static void __init mpc85xx_mds_setup_arch(void) if (lmb_end_of_DRAM() > max) { ppc_swiotlb_enable = 1; set_pci_dma_ops(&swiotlb_pci_dma_ops); + ppc_md.pci_dma_dev_setup = pci_dma_dev_setup_swiotlb; } #endif } diff --git a/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c b/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c index 66327024a6a..80323015687 100644 --- a/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c +++ b/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c @@ -106,6 +106,7 @@ mpc86xx_hpcn_setup_arch(void) if (lmb_end_of_DRAM() > max) { ppc_swiotlb_enable = 1; set_pci_dma_ops(&swiotlb_pci_dma_ops); + ppc_md.pci_dma_dev_setup = pci_dma_dev_setup_swiotlb; } #endif } -- cgit v1.2.3-70-g09d2 From 3702977fa7d1a1a95caa387121fa7c9f4cae35f3 Mon Sep 17 00:00:00 2001 From: FUJITA Tomonori Date: Tue, 4 Aug 2009 19:08:23 +0000 Subject: powerpc: Remove swiotlb_pci_dma_ops Now swiotlb_pci_dma_ops is identical to swiotlb_dma_ops; we can use swiotlb_dma_ops with any devices. This removes swiotlb_pci_dma_ops. Signed-off-by: FUJITA Tomonori Acked-by: Becky Bruce Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/include/asm/swiotlb.h | 1 - arch/powerpc/kernel/dma-swiotlb.c | 14 -------------- arch/powerpc/platforms/85xx/mpc8536_ds.c | 2 +- arch/powerpc/platforms/85xx/mpc85xx_ds.c | 2 +- arch/powerpc/platforms/85xx/mpc85xx_mds.c | 2 +- arch/powerpc/platforms/86xx/mpc86xx_hpcn.c | 2 +- 6 files changed, 4 insertions(+), 19 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/include/asm/swiotlb.h b/arch/powerpc/include/asm/swiotlb.h index 31e0e43c880..21ce0a3b494 100644 --- a/arch/powerpc/include/asm/swiotlb.h +++ b/arch/powerpc/include/asm/swiotlb.h @@ -14,7 +14,6 @@ #include extern struct dma_mapping_ops swiotlb_dma_ops; -extern struct dma_mapping_ops swiotlb_pci_dma_ops; static inline void dma_mark_clean(void *addr, size_t size) {} diff --git a/arch/powerpc/kernel/dma-swiotlb.c b/arch/powerpc/kernel/dma-swiotlb.c index c9f6a302e87..ca141e108ae 100644 --- a/arch/powerpc/kernel/dma-swiotlb.c +++ b/arch/powerpc/kernel/dma-swiotlb.c @@ -45,20 +45,6 @@ struct dma_mapping_ops swiotlb_dma_ops = { .sync_sg_for_device = swiotlb_sync_sg_for_device }; -struct dma_mapping_ops swiotlb_pci_dma_ops = { - .alloc_coherent = dma_direct_alloc_coherent, - .free_coherent = dma_direct_free_coherent, - .map_sg = swiotlb_map_sg_attrs, - .unmap_sg = swiotlb_unmap_sg_attrs, - .dma_supported = swiotlb_dma_supported, - .map_page = swiotlb_map_page, - .unmap_page = swiotlb_unmap_page, - .sync_single_range_for_cpu = swiotlb_sync_single_range_for_cpu, - .sync_single_range_for_device = swiotlb_sync_single_range_for_device, - .sync_sg_for_cpu = swiotlb_sync_sg_for_cpu, - .sync_sg_for_device = swiotlb_sync_sg_for_device -}; - void pci_dma_dev_setup_swiotlb(struct pci_dev *pdev) { struct pci_controller *hose; diff --git a/arch/powerpc/platforms/85xx/mpc8536_ds.c b/arch/powerpc/platforms/85xx/mpc8536_ds.c index bf052c05610..004b7d36cdb 100644 --- a/arch/powerpc/platforms/85xx/mpc8536_ds.c +++ b/arch/powerpc/platforms/85xx/mpc8536_ds.c @@ -96,7 +96,7 @@ static void __init mpc8536_ds_setup_arch(void) #ifdef CONFIG_SWIOTLB if (lmb_end_of_DRAM() > max) { ppc_swiotlb_enable = 1; - set_pci_dma_ops(&swiotlb_pci_dma_ops); + set_pci_dma_ops(&swiotlb_dma_ops); ppc_md.pci_dma_dev_setup = pci_dma_dev_setup_swiotlb; } #endif diff --git a/arch/powerpc/platforms/85xx/mpc85xx_ds.c b/arch/powerpc/platforms/85xx/mpc85xx_ds.c index c6f92ccd963..544011a562f 100644 --- a/arch/powerpc/platforms/85xx/mpc85xx_ds.c +++ b/arch/powerpc/platforms/85xx/mpc85xx_ds.c @@ -192,7 +192,7 @@ static void __init mpc85xx_ds_setup_arch(void) #ifdef CONFIG_SWIOTLB if (lmb_end_of_DRAM() > max) { ppc_swiotlb_enable = 1; - set_pci_dma_ops(&swiotlb_pci_dma_ops); + set_pci_dma_ops(&swiotlb_dma_ops); ppc_md.pci_dma_dev_setup = pci_dma_dev_setup_swiotlb; } #endif diff --git a/arch/powerpc/platforms/85xx/mpc85xx_mds.c b/arch/powerpc/platforms/85xx/mpc85xx_mds.c index 25998b661f2..3909d57b86e 100644 --- a/arch/powerpc/platforms/85xx/mpc85xx_mds.c +++ b/arch/powerpc/platforms/85xx/mpc85xx_mds.c @@ -255,7 +255,7 @@ static void __init mpc85xx_mds_setup_arch(void) #ifdef CONFIG_SWIOTLB if (lmb_end_of_DRAM() > max) { ppc_swiotlb_enable = 1; - set_pci_dma_ops(&swiotlb_pci_dma_ops); + set_pci_dma_ops(&swiotlb_dma_ops); ppc_md.pci_dma_dev_setup = pci_dma_dev_setup_swiotlb; } #endif diff --git a/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c b/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c index 80323015687..2aa69a69bcc 100644 --- a/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c +++ b/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c @@ -105,7 +105,7 @@ mpc86xx_hpcn_setup_arch(void) #ifdef CONFIG_SWIOTLB if (lmb_end_of_DRAM() > max) { ppc_swiotlb_enable = 1; - set_pci_dma_ops(&swiotlb_pci_dma_ops); + set_pci_dma_ops(&swiotlb_dma_ops); ppc_md.pci_dma_dev_setup = pci_dma_dev_setup_swiotlb; } #endif -- cgit v1.2.3-70-g09d2 From 45223c549273bbb2c6e1bc6e3629174e8765ad01 Mon Sep 17 00:00:00 2001 From: FUJITA Tomonori Date: Tue, 4 Aug 2009 19:08:25 +0000 Subject: powerpc: use dma_map_ops struct This converts uses dma_map_ops struct (in include/linux/dma-mapping.h) instead of POWERPC homegrown dma_mapping_ops. Signed-off-by: FUJITA Tomonori Acked-by: Becky Bruce Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/include/asm/device.h | 4 +- arch/powerpc/include/asm/dma-mapping.h | 84 +++++++++------------------------ arch/powerpc/include/asm/pci.h | 4 +- arch/powerpc/include/asm/swiotlb.h | 2 +- arch/powerpc/kernel/dma-iommu.c | 2 +- arch/powerpc/kernel/dma-swiotlb.c | 2 +- arch/powerpc/kernel/dma.c | 2 +- arch/powerpc/kernel/ibmebus.c | 2 +- arch/powerpc/kernel/pci-common.c | 6 +-- arch/powerpc/kernel/vio.c | 2 +- arch/powerpc/platforms/cell/iommu.c | 2 +- arch/powerpc/platforms/ps3/system-bus.c | 4 +- 12 files changed, 37 insertions(+), 79 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/include/asm/device.h b/arch/powerpc/include/asm/device.h index 0086f8d46f1..67fcd7f89d9 100644 --- a/arch/powerpc/include/asm/device.h +++ b/arch/powerpc/include/asm/device.h @@ -6,7 +6,7 @@ #ifndef _ASM_POWERPC_DEVICE_H #define _ASM_POWERPC_DEVICE_H -struct dma_mapping_ops; +struct dma_map_ops; struct device_node; struct dev_archdata { @@ -14,7 +14,7 @@ struct dev_archdata { struct device_node *of_node; /* DMA operations on that device */ - struct dma_mapping_ops *dma_ops; + struct dma_map_ops *dma_ops; void *dma_data; #ifdef CONFIG_SWIOTLB dma_addr_t max_direct_dma_addr; diff --git a/arch/powerpc/include/asm/dma-mapping.h b/arch/powerpc/include/asm/dma-mapping.h index 1765c379138..8ca2b5183c5 100644 --- a/arch/powerpc/include/asm/dma-mapping.h +++ b/arch/powerpc/include/asm/dma-mapping.h @@ -63,57 +63,15 @@ static inline unsigned long device_to_mask(struct device *dev) return 0xfffffffful; } -/* - * DMA operations are abstracted for G5 vs. i/pSeries, PCI vs. VIO - */ -struct dma_mapping_ops { - void * (*alloc_coherent)(struct device *dev, size_t size, - dma_addr_t *dma_handle, gfp_t flag); - void (*free_coherent)(struct device *dev, size_t size, - void *vaddr, dma_addr_t dma_handle); - int (*map_sg)(struct device *dev, struct scatterlist *sg, - int nents, enum dma_data_direction direction, - struct dma_attrs *attrs); - void (*unmap_sg)(struct device *dev, struct scatterlist *sg, - int nents, enum dma_data_direction direction, - struct dma_attrs *attrs); - int (*dma_supported)(struct device *dev, u64 mask); - int (*set_dma_mask)(struct device *dev, u64 dma_mask); - dma_addr_t (*map_page)(struct device *dev, struct page *page, - unsigned long offset, size_t size, - enum dma_data_direction direction, - struct dma_attrs *attrs); - void (*unmap_page)(struct device *dev, - dma_addr_t dma_address, size_t size, - enum dma_data_direction direction, - struct dma_attrs *attrs); -#ifdef CONFIG_PPC_NEED_DMA_SYNC_OPS - void (*sync_single_range_for_cpu)(struct device *hwdev, - dma_addr_t dma_handle, unsigned long offset, - size_t size, - enum dma_data_direction direction); - void (*sync_single_range_for_device)(struct device *hwdev, - dma_addr_t dma_handle, unsigned long offset, - size_t size, - enum dma_data_direction direction); - void (*sync_sg_for_cpu)(struct device *hwdev, - struct scatterlist *sg, int nelems, - enum dma_data_direction direction); - void (*sync_sg_for_device)(struct device *hwdev, - struct scatterlist *sg, int nelems, - enum dma_data_direction direction); -#endif -}; - /* * Available generic sets of operations */ #ifdef CONFIG_PPC64 -extern struct dma_mapping_ops dma_iommu_ops; +extern struct dma_map_ops dma_iommu_ops; #endif -extern struct dma_mapping_ops dma_direct_ops; +extern struct dma_map_ops dma_direct_ops; -static inline struct dma_mapping_ops *get_dma_ops(struct device *dev) +static inline struct dma_map_ops *get_dma_ops(struct device *dev) { /* We don't handle the NULL dev case for ISA for now. We could * do it via an out of line call but it is not needed for now. The @@ -126,14 +84,14 @@ static inline struct dma_mapping_ops *get_dma_ops(struct device *dev) return dev->archdata.dma_ops; } -static inline void set_dma_ops(struct device *dev, struct dma_mapping_ops *ops) +static inline void set_dma_ops(struct device *dev, struct dma_map_ops *ops) { dev->archdata.dma_ops = ops; } static inline int dma_supported(struct device *dev, u64 mask) { - struct dma_mapping_ops *dma_ops = get_dma_ops(dev); + struct dma_map_ops *dma_ops = get_dma_ops(dev); if (unlikely(dma_ops == NULL)) return 0; @@ -147,7 +105,7 @@ static inline int dma_supported(struct device *dev, u64 mask) static inline int dma_set_mask(struct device *dev, u64 dma_mask) { - struct dma_mapping_ops *dma_ops = get_dma_ops(dev); + struct dma_map_ops *dma_ops = get_dma_ops(dev); if (unlikely(dma_ops == NULL)) return -EIO; @@ -161,7 +119,7 @@ static inline int dma_set_mask(struct device *dev, u64 dma_mask) /* * map_/unmap_single actually call through to map/unmap_page now that all the - * dma_mapping_ops have been converted over. We just have to get the page and + * dma_map_ops have been converted over. We just have to get the page and * offset to pass through to map_page */ static inline dma_addr_t dma_map_single_attrs(struct device *dev, @@ -170,7 +128,7 @@ static inline dma_addr_t dma_map_single_attrs(struct device *dev, enum dma_data_direction direction, struct dma_attrs *attrs) { - struct dma_mapping_ops *dma_ops = get_dma_ops(dev); + struct dma_map_ops *dma_ops = get_dma_ops(dev); BUG_ON(!dma_ops); @@ -185,7 +143,7 @@ static inline void dma_unmap_single_attrs(struct device *dev, enum dma_data_direction direction, struct dma_attrs *attrs) { - struct dma_mapping_ops *dma_ops = get_dma_ops(dev); + struct dma_map_ops *dma_ops = get_dma_ops(dev); BUG_ON(!dma_ops); @@ -198,7 +156,7 @@ static inline dma_addr_t dma_map_page_attrs(struct device *dev, enum dma_data_direction direction, struct dma_attrs *attrs) { - struct dma_mapping_ops *dma_ops = get_dma_ops(dev); + struct dma_map_ops *dma_ops = get_dma_ops(dev); BUG_ON(!dma_ops); @@ -211,7 +169,7 @@ static inline void dma_unmap_page_attrs(struct device *dev, enum dma_data_direction direction, struct dma_attrs *attrs) { - struct dma_mapping_ops *dma_ops = get_dma_ops(dev); + struct dma_map_ops *dma_ops = get_dma_ops(dev); BUG_ON(!dma_ops); @@ -222,7 +180,7 @@ static inline int dma_map_sg_attrs(struct device *dev, struct scatterlist *sg, int nents, enum dma_data_direction direction, struct dma_attrs *attrs) { - struct dma_mapping_ops *dma_ops = get_dma_ops(dev); + struct dma_map_ops *dma_ops = get_dma_ops(dev); BUG_ON(!dma_ops); return dma_ops->map_sg(dev, sg, nents, direction, attrs); @@ -234,7 +192,7 @@ static inline void dma_unmap_sg_attrs(struct device *dev, enum dma_data_direction direction, struct dma_attrs *attrs) { - struct dma_mapping_ops *dma_ops = get_dma_ops(dev); + struct dma_map_ops *dma_ops = get_dma_ops(dev); BUG_ON(!dma_ops); dma_ops->unmap_sg(dev, sg, nhwentries, direction, attrs); @@ -243,7 +201,7 @@ static inline void dma_unmap_sg_attrs(struct device *dev, static inline void *dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *dma_handle, gfp_t flag) { - struct dma_mapping_ops *dma_ops = get_dma_ops(dev); + struct dma_map_ops *dma_ops = get_dma_ops(dev); BUG_ON(!dma_ops); return dma_ops->alloc_coherent(dev, size, dma_handle, flag); @@ -252,7 +210,7 @@ static inline void *dma_alloc_coherent(struct device *dev, size_t size, static inline void dma_free_coherent(struct device *dev, size_t size, void *cpu_addr, dma_addr_t dma_handle) { - struct dma_mapping_ops *dma_ops = get_dma_ops(dev); + struct dma_map_ops *dma_ops = get_dma_ops(dev); BUG_ON(!dma_ops); dma_ops->free_coherent(dev, size, cpu_addr, dma_handle); @@ -304,7 +262,7 @@ static inline void dma_sync_single_for_cpu(struct device *dev, dma_addr_t dma_handle, size_t size, enum dma_data_direction direction) { - struct dma_mapping_ops *dma_ops = get_dma_ops(dev); + struct dma_map_ops *dma_ops = get_dma_ops(dev); BUG_ON(!dma_ops); @@ -317,7 +275,7 @@ static inline void dma_sync_single_for_device(struct device *dev, dma_addr_t dma_handle, size_t size, enum dma_data_direction direction) { - struct dma_mapping_ops *dma_ops = get_dma_ops(dev); + struct dma_map_ops *dma_ops = get_dma_ops(dev); BUG_ON(!dma_ops); @@ -330,7 +288,7 @@ static inline void dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sgl, int nents, enum dma_data_direction direction) { - struct dma_mapping_ops *dma_ops = get_dma_ops(dev); + struct dma_map_ops *dma_ops = get_dma_ops(dev); BUG_ON(!dma_ops); @@ -342,7 +300,7 @@ static inline void dma_sync_sg_for_device(struct device *dev, struct scatterlist *sgl, int nents, enum dma_data_direction direction) { - struct dma_mapping_ops *dma_ops = get_dma_ops(dev); + struct dma_map_ops *dma_ops = get_dma_ops(dev); BUG_ON(!dma_ops); @@ -354,7 +312,7 @@ static inline void dma_sync_single_range_for_cpu(struct device *dev, dma_addr_t dma_handle, unsigned long offset, size_t size, enum dma_data_direction direction) { - struct dma_mapping_ops *dma_ops = get_dma_ops(dev); + struct dma_map_ops *dma_ops = get_dma_ops(dev); BUG_ON(!dma_ops); @@ -367,7 +325,7 @@ static inline void dma_sync_single_range_for_device(struct device *dev, dma_addr_t dma_handle, unsigned long offset, size_t size, enum dma_data_direction direction) { - struct dma_mapping_ops *dma_ops = get_dma_ops(dev); + struct dma_map_ops *dma_ops = get_dma_ops(dev); BUG_ON(!dma_ops); diff --git a/arch/powerpc/include/asm/pci.h b/arch/powerpc/include/asm/pci.h index d9483c504d2..7ae46d7e270 100644 --- a/arch/powerpc/include/asm/pci.h +++ b/arch/powerpc/include/asm/pci.h @@ -61,8 +61,8 @@ static inline int pci_get_legacy_ide_irq(struct pci_dev *dev, int channel) } #ifdef CONFIG_PCI -extern void set_pci_dma_ops(struct dma_mapping_ops *dma_ops); -extern struct dma_mapping_ops *get_pci_dma_ops(void); +extern void set_pci_dma_ops(struct dma_map_ops *dma_ops); +extern struct dma_map_ops *get_pci_dma_ops(void); #else /* CONFIG_PCI */ #define set_pci_dma_ops(d) #define get_pci_dma_ops() NULL diff --git a/arch/powerpc/include/asm/swiotlb.h b/arch/powerpc/include/asm/swiotlb.h index 21ce0a3b494..8979d4cd3d7 100644 --- a/arch/powerpc/include/asm/swiotlb.h +++ b/arch/powerpc/include/asm/swiotlb.h @@ -13,7 +13,7 @@ #include -extern struct dma_mapping_ops swiotlb_dma_ops; +extern struct dma_map_ops swiotlb_dma_ops; static inline void dma_mark_clean(void *addr, size_t size) {} diff --git a/arch/powerpc/kernel/dma-iommu.c b/arch/powerpc/kernel/dma-iommu.c index 2983adac8cc..87ddb3fb948 100644 --- a/arch/powerpc/kernel/dma-iommu.c +++ b/arch/powerpc/kernel/dma-iommu.c @@ -89,7 +89,7 @@ static int dma_iommu_dma_supported(struct device *dev, u64 mask) return 1; } -struct dma_mapping_ops dma_iommu_ops = { +struct dma_map_ops dma_iommu_ops = { .alloc_coherent = dma_iommu_alloc_coherent, .free_coherent = dma_iommu_free_coherent, .map_sg = dma_iommu_map_sg, diff --git a/arch/powerpc/kernel/dma-swiotlb.c b/arch/powerpc/kernel/dma-swiotlb.c index ca141e108ae..d1143a68d82 100644 --- a/arch/powerpc/kernel/dma-swiotlb.c +++ b/arch/powerpc/kernel/dma-swiotlb.c @@ -31,7 +31,7 @@ unsigned int ppc_swiotlb_enable; * map_page, and unmap_page on highmem, use normal dma_ops * for everything else. */ -struct dma_mapping_ops swiotlb_dma_ops = { +struct dma_map_ops swiotlb_dma_ops = { .alloc_coherent = dma_direct_alloc_coherent, .free_coherent = dma_direct_free_coherent, .map_sg = swiotlb_map_sg_attrs, diff --git a/arch/powerpc/kernel/dma.c b/arch/powerpc/kernel/dma.c index ccf129d47d8..c61f70e145a 100644 --- a/arch/powerpc/kernel/dma.c +++ b/arch/powerpc/kernel/dma.c @@ -140,7 +140,7 @@ static inline void dma_direct_sync_single_range(struct device *dev, } #endif -struct dma_mapping_ops dma_direct_ops = { +struct dma_map_ops dma_direct_ops = { .alloc_coherent = dma_direct_alloc_coherent, .free_coherent = dma_direct_free_coherent, .map_sg = dma_direct_map_sg, diff --git a/arch/powerpc/kernel/ibmebus.c b/arch/powerpc/kernel/ibmebus.c index 6e3f6249365..a4c8b38b0ba 100644 --- a/arch/powerpc/kernel/ibmebus.c +++ b/arch/powerpc/kernel/ibmebus.c @@ -127,7 +127,7 @@ static int ibmebus_dma_supported(struct device *dev, u64 mask) return 1; } -static struct dma_mapping_ops ibmebus_dma_ops = { +static struct dma_map_ops ibmebus_dma_ops = { .alloc_coherent = ibmebus_alloc_coherent, .free_coherent = ibmebus_free_coherent, .map_sg = ibmebus_map_sg, diff --git a/arch/powerpc/kernel/pci-common.c b/arch/powerpc/kernel/pci-common.c index 5a56e97c5ac..7585f1fc26d 100644 --- a/arch/powerpc/kernel/pci-common.c +++ b/arch/powerpc/kernel/pci-common.c @@ -50,14 +50,14 @@ resource_size_t isa_mem_base; unsigned int ppc_pci_flags = 0; -static struct dma_mapping_ops *pci_dma_ops = &dma_direct_ops; +static struct dma_map_ops *pci_dma_ops = &dma_direct_ops; -void set_pci_dma_ops(struct dma_mapping_ops *dma_ops) +void set_pci_dma_ops(struct dma_map_ops *dma_ops) { pci_dma_ops = dma_ops; } -struct dma_mapping_ops *get_pci_dma_ops(void) +struct dma_map_ops *get_pci_dma_ops(void) { return pci_dma_ops; } diff --git a/arch/powerpc/kernel/vio.c b/arch/powerpc/kernel/vio.c index 819e59f6f7c..bc7b41edbdf 100644 --- a/arch/powerpc/kernel/vio.c +++ b/arch/powerpc/kernel/vio.c @@ -601,7 +601,7 @@ static void vio_dma_iommu_unmap_sg(struct device *dev, vio_cmo_dealloc(viodev, alloc_size); } -struct dma_mapping_ops vio_dma_mapping_ops = { +struct dma_map_ops vio_dma_mapping_ops = { .alloc_coherent = vio_dma_iommu_alloc_coherent, .free_coherent = vio_dma_iommu_free_coherent, .map_sg = vio_dma_iommu_map_sg, diff --git a/arch/powerpc/platforms/cell/iommu.c b/arch/powerpc/platforms/cell/iommu.c index 5b34fc211f3..416db17eb18 100644 --- a/arch/powerpc/platforms/cell/iommu.c +++ b/arch/powerpc/platforms/cell/iommu.c @@ -642,7 +642,7 @@ static int dma_fixed_dma_supported(struct device *dev, u64 mask) static int dma_set_mask_and_switch(struct device *dev, u64 dma_mask); -struct dma_mapping_ops dma_iommu_fixed_ops = { +struct dma_map_ops dma_iommu_fixed_ops = { .alloc_coherent = dma_fixed_alloc_coherent, .free_coherent = dma_fixed_free_coherent, .map_sg = dma_fixed_map_sg, diff --git a/arch/powerpc/platforms/ps3/system-bus.c b/arch/powerpc/platforms/ps3/system-bus.c index 676f989ed4e..e34b305a7a5 100644 --- a/arch/powerpc/platforms/ps3/system-bus.c +++ b/arch/powerpc/platforms/ps3/system-bus.c @@ -694,7 +694,7 @@ static int ps3_dma_supported(struct device *_dev, u64 mask) return mask >= DMA_BIT_MASK(32); } -static struct dma_mapping_ops ps3_sb_dma_ops = { +static struct dma_map_ops ps3_sb_dma_ops = { .alloc_coherent = ps3_alloc_coherent, .free_coherent = ps3_free_coherent, .map_sg = ps3_sb_map_sg, @@ -704,7 +704,7 @@ static struct dma_mapping_ops ps3_sb_dma_ops = { .unmap_page = ps3_unmap_page, }; -static struct dma_mapping_ops ps3_ioc0_dma_ops = { +static struct dma_map_ops ps3_ioc0_dma_ops = { .alloc_coherent = ps3_alloc_coherent, .free_coherent = ps3_free_coherent, .map_sg = ps3_ioc0_map_sg, -- cgit v1.2.3-70-g09d2 From 46bab4e4b45ec522ecd5fa4a0e2b4a6e6d1f153a Mon Sep 17 00:00:00 2001 From: FUJITA Tomonori Date: Tue, 4 Aug 2009 19:08:26 +0000 Subject: powerpc: Use asm-generic/dma-mapping-common.h Signed-off-by: FUJITA Tomonori Acked-by: Becky Bruce Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/Kconfig | 6 +- arch/powerpc/include/asm/dma-mapping.h | 242 +-------------------------------- 2 files changed, 7 insertions(+), 241 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index 4c0747e8ed7..6078253c6d7 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -120,7 +120,7 @@ config PPC select HAVE_KRETPROBES select HAVE_ARCH_TRACEHOOK select HAVE_LMB - select HAVE_DMA_ATTRS if PPC64 + select HAVE_DMA_ATTRS select USE_GENERIC_SMP_HELPERS if SMP select HAVE_OPROFILE select HAVE_SYSCALL_WRAPPERS if PPC64 @@ -307,10 +307,6 @@ config SWIOTLB platforms where the size of a physical address is larger than the bus address. Not all platforms support this. -config PPC_NEED_DMA_SYNC_OPS - def_bool y - depends on (NOT_COHERENT_CACHE || SWIOTLB) - config HOTPLUG_CPU bool "Support for enabling/disabling CPUs" depends on SMP && HOTPLUG && EXPERIMENTAL && (PPC_PSERIES || PPC_PMAC) diff --git a/arch/powerpc/include/asm/dma-mapping.h b/arch/powerpc/include/asm/dma-mapping.h index 8ca2b5183c5..91217e4a0bf 100644 --- a/arch/powerpc/include/asm/dma-mapping.h +++ b/arch/powerpc/include/asm/dma-mapping.h @@ -14,6 +14,7 @@ #include #include #include +#include #include #include @@ -89,6 +90,11 @@ static inline void set_dma_ops(struct device *dev, struct dma_map_ops *ops) dev->archdata.dma_ops = ops; } +/* this will be removed soon */ +#define flush_write_buffers() + +#include + static inline int dma_supported(struct device *dev, u64 mask) { struct dma_map_ops *dma_ops = get_dma_ops(dev); @@ -117,87 +123,6 @@ static inline int dma_set_mask(struct device *dev, u64 dma_mask) return 0; } -/* - * map_/unmap_single actually call through to map/unmap_page now that all the - * dma_map_ops have been converted over. We just have to get the page and - * offset to pass through to map_page - */ -static inline dma_addr_t dma_map_single_attrs(struct device *dev, - void *cpu_addr, - size_t size, - enum dma_data_direction direction, - struct dma_attrs *attrs) -{ - struct dma_map_ops *dma_ops = get_dma_ops(dev); - - BUG_ON(!dma_ops); - - return dma_ops->map_page(dev, virt_to_page(cpu_addr), - (unsigned long)cpu_addr % PAGE_SIZE, size, - direction, attrs); -} - -static inline void dma_unmap_single_attrs(struct device *dev, - dma_addr_t dma_addr, - size_t size, - enum dma_data_direction direction, - struct dma_attrs *attrs) -{ - struct dma_map_ops *dma_ops = get_dma_ops(dev); - - BUG_ON(!dma_ops); - - dma_ops->unmap_page(dev, dma_addr, size, direction, attrs); -} - -static inline dma_addr_t dma_map_page_attrs(struct device *dev, - struct page *page, - unsigned long offset, size_t size, - enum dma_data_direction direction, - struct dma_attrs *attrs) -{ - struct dma_map_ops *dma_ops = get_dma_ops(dev); - - BUG_ON(!dma_ops); - - return dma_ops->map_page(dev, page, offset, size, direction, attrs); -} - -static inline void dma_unmap_page_attrs(struct device *dev, - dma_addr_t dma_address, - size_t size, - enum dma_data_direction direction, - struct dma_attrs *attrs) -{ - struct dma_map_ops *dma_ops = get_dma_ops(dev); - - BUG_ON(!dma_ops); - - dma_ops->unmap_page(dev, dma_address, size, direction, attrs); -} - -static inline int dma_map_sg_attrs(struct device *dev, struct scatterlist *sg, - int nents, enum dma_data_direction direction, - struct dma_attrs *attrs) -{ - struct dma_map_ops *dma_ops = get_dma_ops(dev); - - BUG_ON(!dma_ops); - return dma_ops->map_sg(dev, sg, nents, direction, attrs); -} - -static inline void dma_unmap_sg_attrs(struct device *dev, - struct scatterlist *sg, - int nhwentries, - enum dma_data_direction direction, - struct dma_attrs *attrs) -{ - struct dma_map_ops *dma_ops = get_dma_ops(dev); - - BUG_ON(!dma_ops); - dma_ops->unmap_sg(dev, sg, nhwentries, direction, attrs); -} - static inline void *dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *dma_handle, gfp_t flag) { @@ -216,161 +141,6 @@ static inline void dma_free_coherent(struct device *dev, size_t size, dma_ops->free_coherent(dev, size, cpu_addr, dma_handle); } -static inline dma_addr_t dma_map_single(struct device *dev, void *cpu_addr, - size_t size, - enum dma_data_direction direction) -{ - return dma_map_single_attrs(dev, cpu_addr, size, direction, NULL); -} - -static inline void dma_unmap_single(struct device *dev, dma_addr_t dma_addr, - size_t size, - enum dma_data_direction direction) -{ - dma_unmap_single_attrs(dev, dma_addr, size, direction, NULL); -} - -static inline dma_addr_t dma_map_page(struct device *dev, struct page *page, - unsigned long offset, size_t size, - enum dma_data_direction direction) -{ - return dma_map_page_attrs(dev, page, offset, size, direction, NULL); -} - -static inline void dma_unmap_page(struct device *dev, dma_addr_t dma_address, - size_t size, - enum dma_data_direction direction) -{ - dma_unmap_page_attrs(dev, dma_address, size, direction, NULL); -} - -static inline int dma_map_sg(struct device *dev, struct scatterlist *sg, - int nents, enum dma_data_direction direction) -{ - return dma_map_sg_attrs(dev, sg, nents, direction, NULL); -} - -static inline void dma_unmap_sg(struct device *dev, struct scatterlist *sg, - int nhwentries, - enum dma_data_direction direction) -{ - dma_unmap_sg_attrs(dev, sg, nhwentries, direction, NULL); -} - -#ifdef CONFIG_PPC_NEED_DMA_SYNC_OPS -static inline void dma_sync_single_for_cpu(struct device *dev, - dma_addr_t dma_handle, size_t size, - enum dma_data_direction direction) -{ - struct dma_map_ops *dma_ops = get_dma_ops(dev); - - BUG_ON(!dma_ops); - - if (dma_ops->sync_single_range_for_cpu) - dma_ops->sync_single_range_for_cpu(dev, dma_handle, 0, - size, direction); -} - -static inline void dma_sync_single_for_device(struct device *dev, - dma_addr_t dma_handle, size_t size, - enum dma_data_direction direction) -{ - struct dma_map_ops *dma_ops = get_dma_ops(dev); - - BUG_ON(!dma_ops); - - if (dma_ops->sync_single_range_for_device) - dma_ops->sync_single_range_for_device(dev, dma_handle, - 0, size, direction); -} - -static inline void dma_sync_sg_for_cpu(struct device *dev, - struct scatterlist *sgl, int nents, - enum dma_data_direction direction) -{ - struct dma_map_ops *dma_ops = get_dma_ops(dev); - - BUG_ON(!dma_ops); - - if (dma_ops->sync_sg_for_cpu) - dma_ops->sync_sg_for_cpu(dev, sgl, nents, direction); -} - -static inline void dma_sync_sg_for_device(struct device *dev, - struct scatterlist *sgl, int nents, - enum dma_data_direction direction) -{ - struct dma_map_ops *dma_ops = get_dma_ops(dev); - - BUG_ON(!dma_ops); - - if (dma_ops->sync_sg_for_device) - dma_ops->sync_sg_for_device(dev, sgl, nents, direction); -} - -static inline void dma_sync_single_range_for_cpu(struct device *dev, - dma_addr_t dma_handle, unsigned long offset, size_t size, - enum dma_data_direction direction) -{ - struct dma_map_ops *dma_ops = get_dma_ops(dev); - - BUG_ON(!dma_ops); - - if (dma_ops->sync_single_range_for_cpu) - dma_ops->sync_single_range_for_cpu(dev, dma_handle, - offset, size, direction); -} - -static inline void dma_sync_single_range_for_device(struct device *dev, - dma_addr_t dma_handle, unsigned long offset, size_t size, - enum dma_data_direction direction) -{ - struct dma_map_ops *dma_ops = get_dma_ops(dev); - - BUG_ON(!dma_ops); - - if (dma_ops->sync_single_range_for_device) - dma_ops->sync_single_range_for_device(dev, dma_handle, offset, - size, direction); -} -#else /* CONFIG_PPC_NEED_DMA_SYNC_OPS */ -static inline void dma_sync_single_for_cpu(struct device *dev, - dma_addr_t dma_handle, size_t size, - enum dma_data_direction direction) -{ -} - -static inline void dma_sync_single_for_device(struct device *dev, - dma_addr_t dma_handle, size_t size, - enum dma_data_direction direction) -{ -} - -static inline void dma_sync_sg_for_cpu(struct device *dev, - struct scatterlist *sgl, int nents, - enum dma_data_direction direction) -{ -} - -static inline void dma_sync_sg_for_device(struct device *dev, - struct scatterlist *sgl, int nents, - enum dma_data_direction direction) -{ -} - -static inline void dma_sync_single_range_for_cpu(struct device *dev, - dma_addr_t dma_handle, unsigned long offset, size_t size, - enum dma_data_direction direction) -{ -} - -static inline void dma_sync_single_range_for_device(struct device *dev, - dma_addr_t dma_handle, unsigned long offset, size_t size, - enum dma_data_direction direction) -{ -} -#endif - static inline int dma_mapping_error(struct device *dev, dma_addr_t dma_addr) { #ifdef CONFIG_PPC64 -- cgit v1.2.3-70-g09d2 From 4a9a6bfe707cfe5bcb0a20eabe240293a095cd10 Mon Sep 17 00:00:00 2001 From: FUJITA Tomonori Date: Tue, 4 Aug 2009 19:08:27 +0000 Subject: powerpc: Handle SWIOTLB mapping error properly Signed-off-by: FUJITA Tomonori Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/include/asm/dma-mapping.h | 5 +++++ arch/powerpc/kernel/dma-swiotlb.c | 3 ++- 2 files changed, 7 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/powerpc/include/asm/dma-mapping.h b/arch/powerpc/include/asm/dma-mapping.h index 91217e4a0bf..4bd41b4051e 100644 --- a/arch/powerpc/include/asm/dma-mapping.h +++ b/arch/powerpc/include/asm/dma-mapping.h @@ -143,6 +143,11 @@ static inline void dma_free_coherent(struct device *dev, size_t size, static inline int dma_mapping_error(struct device *dev, dma_addr_t dma_addr) { + struct dma_map_ops *dma_ops = get_dma_ops(dev); + + if (dma_ops->mapping_error) + return dma_ops->mapping_error(dev, dma_addr); + #ifdef CONFIG_PPC64 return (dma_addr == DMA_ERROR_CODE); #else diff --git a/arch/powerpc/kernel/dma-swiotlb.c b/arch/powerpc/kernel/dma-swiotlb.c index d1143a68d82..e96cbbd9b44 100644 --- a/arch/powerpc/kernel/dma-swiotlb.c +++ b/arch/powerpc/kernel/dma-swiotlb.c @@ -42,7 +42,8 @@ struct dma_map_ops swiotlb_dma_ops = { .sync_single_range_for_cpu = swiotlb_sync_single_range_for_cpu, .sync_single_range_for_device = swiotlb_sync_single_range_for_device, .sync_sg_for_cpu = swiotlb_sync_sg_for_cpu, - .sync_sg_for_device = swiotlb_sync_sg_for_device + .sync_sg_for_device = swiotlb_sync_sg_for_device, + .mapping_error = swiotlb_dma_mapping_error, }; void pci_dma_dev_setup_swiotlb(struct pci_dev *pdev) -- cgit v1.2.3-70-g09d2 From 80d3e8abb73dad3983fef2597b52cab8fbcd876b Mon Sep 17 00:00:00 2001 From: FUJITA Tomonori Date: Tue, 4 Aug 2009 19:08:28 +0000 Subject: powerpc: Add CONFIG_DMA_API_DEBUG support Signed-off-by: FUJITA Tomonori Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/Kconfig | 1 + arch/powerpc/include/asm/dma-mapping.h | 11 ++++++++++- arch/powerpc/kernel/dma.c | 11 +++++++++++ 3 files changed, 22 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index 6078253c6d7..9e03991dc87 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -121,6 +121,7 @@ config PPC select HAVE_ARCH_TRACEHOOK select HAVE_LMB select HAVE_DMA_ATTRS + select HAVE_DMA_API_DEBUG select USE_GENERIC_SMP_HELPERS if SMP select HAVE_OPROFILE select HAVE_SYSCALL_WRAPPERS if PPC64 diff --git a/arch/powerpc/include/asm/dma-mapping.h b/arch/powerpc/include/asm/dma-mapping.h index 4bd41b4051e..cb2ca41dd52 100644 --- a/arch/powerpc/include/asm/dma-mapping.h +++ b/arch/powerpc/include/asm/dma-mapping.h @@ -127,9 +127,15 @@ static inline void *dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *dma_handle, gfp_t flag) { struct dma_map_ops *dma_ops = get_dma_ops(dev); + void *cpu_addr; BUG_ON(!dma_ops); - return dma_ops->alloc_coherent(dev, size, dma_handle, flag); + + cpu_addr = dma_ops->alloc_coherent(dev, size, dma_handle, flag); + + debug_dma_alloc_coherent(dev, size, *dma_handle, cpu_addr); + + return cpu_addr; } static inline void dma_free_coherent(struct device *dev, size_t size, @@ -138,6 +144,9 @@ static inline void dma_free_coherent(struct device *dev, size_t size, struct dma_map_ops *dma_ops = get_dma_ops(dev); BUG_ON(!dma_ops); + + debug_dma_free_coherent(dev, size, cpu_addr, dma_handle); + dma_ops->free_coherent(dev, size, cpu_addr, dma_handle); } diff --git a/arch/powerpc/kernel/dma.c b/arch/powerpc/kernel/dma.c index c61f70e145a..21b784d7e7d 100644 --- a/arch/powerpc/kernel/dma.c +++ b/arch/powerpc/kernel/dma.c @@ -7,6 +7,7 @@ #include #include +#include #include #include #include @@ -156,3 +157,13 @@ struct dma_map_ops dma_direct_ops = { #endif }; EXPORT_SYMBOL(dma_direct_ops); + +#define PREALLOC_DMA_DEBUG_ENTRIES (1 << 16) + +static int __init dma_init(void) +{ + dma_debug_init(PREALLOC_DMA_DEBUG_ENTRIES); + + return 0; +} +fs_initcall(dma_init); -- cgit v1.2.3-70-g09d2 From e3e1d15855206c85f4c9ed82746e81acfe13e5aa Mon Sep 17 00:00:00 2001 From: Becky Bruce Date: Mon, 24 Aug 2009 06:15:36 +0000 Subject: powerpc: Name xpn & x fields in HW Hash PTE format Previously, the 36-bit code was using these bits, but they had never been named in the pte format definition. This patch just gives those fields their proper names and adds a comment that they are only present on some processors. There is no functional code change. Signed-off-by: Becky Bruce Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/include/asm/mmu-hash32.h | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/include/asm/mmu-hash32.h b/arch/powerpc/include/asm/mmu-hash32.h index 382fc689f20..16f513e5cbd 100644 --- a/arch/powerpc/include/asm/mmu-hash32.h +++ b/arch/powerpc/include/asm/mmu-hash32.h @@ -55,21 +55,25 @@ struct ppc_bat { #ifndef __ASSEMBLY__ -/* Hardware Page Table Entry */ +/* + * Hardware Page Table Entry + * Note that the xpn and x bitfields are used only by processors that + * support extended addressing; otherwise, those bits are reserved. + */ struct hash_pte { unsigned long v:1; /* Entry is valid */ unsigned long vsid:24; /* Virtual segment identifier */ unsigned long h:1; /* Hash algorithm indicator */ unsigned long api:6; /* Abbreviated page index */ unsigned long rpn:20; /* Real (physical) page number */ - unsigned long :3; /* Unused */ + unsigned long xpn:3; /* Real page number bits 0-2, optional */ unsigned long r:1; /* Referenced */ unsigned long c:1; /* Changed */ unsigned long w:1; /* Write-thru cache mode */ unsigned long i:1; /* Cache inhibited */ unsigned long m:1; /* Memory coherence */ unsigned long g:1; /* Guarded */ - unsigned long :1; /* Unused */ + unsigned long x:1; /* Real page number bit 3, optional */ unsigned long pp:2; /* Page protection */ }; -- cgit v1.2.3-70-g09d2 From 23e55f92d4fd733365dd572ea6e9e211387123c2 Mon Sep 17 00:00:00 2001 From: Michael Wolf Date: Thu, 20 Aug 2009 13:21:45 +0000 Subject: powerpc: Adjust base and index registers in Altivec macros On POWER6 systems RA needs to be the base and RB the index. If they are reversed you take a misdirect hit. Signed-off-by: Mike Wolf ---- Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/include/asm/ppc_asm.h | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/include/asm/ppc_asm.h b/arch/powerpc/include/asm/ppc_asm.h index dfae6e916df..498fe09263d 100644 --- a/arch/powerpc/include/asm/ppc_asm.h +++ b/arch/powerpc/include/asm/ppc_asm.h @@ -98,13 +98,13 @@ END_FTR_SECTION_IFCLR(CPU_FTR_PURR); \ #define REST_16FPRS(n, base) REST_8FPRS(n, base); REST_8FPRS(n+8, base) #define REST_32FPRS(n, base) REST_16FPRS(n, base); REST_16FPRS(n+16, base) -#define SAVE_VR(n,b,base) li b,THREAD_VR0+(16*(n)); stvx n,b,base +#define SAVE_VR(n,b,base) li b,THREAD_VR0+(16*(n)); stvx n,base,b #define SAVE_2VRS(n,b,base) SAVE_VR(n,b,base); SAVE_VR(n+1,b,base) #define SAVE_4VRS(n,b,base) SAVE_2VRS(n,b,base); SAVE_2VRS(n+2,b,base) #define SAVE_8VRS(n,b,base) SAVE_4VRS(n,b,base); SAVE_4VRS(n+4,b,base) #define SAVE_16VRS(n,b,base) SAVE_8VRS(n,b,base); SAVE_8VRS(n+8,b,base) #define SAVE_32VRS(n,b,base) SAVE_16VRS(n,b,base); SAVE_16VRS(n+16,b,base) -#define REST_VR(n,b,base) li b,THREAD_VR0+(16*(n)); lvx n,b,base +#define REST_VR(n,b,base) li b,THREAD_VR0+(16*(n)); lvx n,base,b #define REST_2VRS(n,b,base) REST_VR(n,b,base); REST_VR(n+1,b,base) #define REST_4VRS(n,b,base) REST_2VRS(n,b,base); REST_2VRS(n+2,b,base) #define REST_8VRS(n,b,base) REST_4VRS(n,b,base); REST_4VRS(n+4,b,base) @@ -112,26 +112,26 @@ END_FTR_SECTION_IFCLR(CPU_FTR_PURR); \ #define REST_32VRS(n,b,base) REST_16VRS(n,b,base); REST_16VRS(n+16,b,base) /* Save the lower 32 VSRs in the thread VSR region */ -#define SAVE_VSR(n,b,base) li b,THREAD_VSR0+(16*(n)); STXVD2X(n,b,base) +#define SAVE_VSR(n,b,base) li b,THREAD_VSR0+(16*(n)); STXVD2X(n,base,b) #define SAVE_2VSRS(n,b,base) SAVE_VSR(n,b,base); SAVE_VSR(n+1,b,base) #define SAVE_4VSRS(n,b,base) SAVE_2VSRS(n,b,base); SAVE_2VSRS(n+2,b,base) #define SAVE_8VSRS(n,b,base) SAVE_4VSRS(n,b,base); SAVE_4VSRS(n+4,b,base) #define SAVE_16VSRS(n,b,base) SAVE_8VSRS(n,b,base); SAVE_8VSRS(n+8,b,base) #define SAVE_32VSRS(n,b,base) SAVE_16VSRS(n,b,base); SAVE_16VSRS(n+16,b,base) -#define REST_VSR(n,b,base) li b,THREAD_VSR0+(16*(n)); LXVD2X(n,b,base) +#define REST_VSR(n,b,base) li b,THREAD_VSR0+(16*(n)); LXVD2X(n,base,b) #define REST_2VSRS(n,b,base) REST_VSR(n,b,base); REST_VSR(n+1,b,base) #define REST_4VSRS(n,b,base) REST_2VSRS(n,b,base); REST_2VSRS(n+2,b,base) #define REST_8VSRS(n,b,base) REST_4VSRS(n,b,base); REST_4VSRS(n+4,b,base) #define REST_16VSRS(n,b,base) REST_8VSRS(n,b,base); REST_8VSRS(n+8,b,base) #define REST_32VSRS(n,b,base) REST_16VSRS(n,b,base); REST_16VSRS(n+16,b,base) /* Save the upper 32 VSRs (32-63) in the thread VSX region (0-31) */ -#define SAVE_VSRU(n,b,base) li b,THREAD_VR0+(16*(n)); STXVD2X(n+32,b,base) +#define SAVE_VSRU(n,b,base) li b,THREAD_VR0+(16*(n)); STXVD2X(n+32,base,b) #define SAVE_2VSRSU(n,b,base) SAVE_VSRU(n,b,base); SAVE_VSRU(n+1,b,base) #define SAVE_4VSRSU(n,b,base) SAVE_2VSRSU(n,b,base); SAVE_2VSRSU(n+2,b,base) #define SAVE_8VSRSU(n,b,base) SAVE_4VSRSU(n,b,base); SAVE_4VSRSU(n+4,b,base) #define SAVE_16VSRSU(n,b,base) SAVE_8VSRSU(n,b,base); SAVE_8VSRSU(n+8,b,base) #define SAVE_32VSRSU(n,b,base) SAVE_16VSRSU(n,b,base); SAVE_16VSRSU(n+16,b,base) -#define REST_VSRU(n,b,base) li b,THREAD_VR0+(16*(n)); LXVD2X(n+32,b,base) +#define REST_VSRU(n,b,base) li b,THREAD_VR0+(16*(n)); LXVD2X(n+32,base,b) #define REST_2VSRSU(n,b,base) REST_VSRU(n,b,base); REST_VSRU(n+1,b,base) #define REST_4VSRSU(n,b,base) REST_2VSRSU(n,b,base); REST_2VSRSU(n+2,b,base) #define REST_8VSRSU(n,b,base) REST_4VSRSU(n,b,base); REST_4VSRSU(n+4,b,base) -- cgit v1.2.3-70-g09d2 From df5d6ecf8157245ef733db87597adb2c6e2510da Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Mon, 24 Aug 2009 15:52:48 +0000 Subject: powerpc/mm: Add MMU features for TLB reservation & Paired MAS registers Support for TLB reservation (or TLB Write Conditional) and Paired MAS registers are optional for a processor implementation so we handle them via MMU feature sections. We currently only used paired MAS registers to access the full RPN + perm bits that are kept in MAS7||MAS3. We assume that if an implementation has hardware page table at this time it also implements in TLB reservations. Signed-off-by: Kumar Gala Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/include/asm/mmu.h | 9 +++++++++ arch/powerpc/mm/tlb_low_64e.S | 38 +++++++++++++++++++++++++++++++++++++- 2 files changed, 46 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/powerpc/include/asm/mmu.h b/arch/powerpc/include/asm/mmu.h index 2fcfefc6089..7ffbb65ff7a 100644 --- a/arch/powerpc/include/asm/mmu.h +++ b/arch/powerpc/include/asm/mmu.h @@ -58,6 +58,15 @@ */ #define MMU_FTR_TLBIE_206 ASM_CONST(0x00400000) +/* Enable use of TLB reservation. Processor should support tlbsrx. + * instruction and MAS0[WQ]. + */ +#define MMU_FTR_USE_TLBRSRV ASM_CONST(0x00800000) + +/* Use paired MAS registers (MAS7||MAS3, etc.) + */ +#define MMU_FTR_USE_PAIRED_MAS ASM_CONST(0x01000000) + #ifndef __ASSEMBLY__ #include diff --git a/arch/powerpc/mm/tlb_low_64e.S b/arch/powerpc/mm/tlb_low_64e.S index cd92f62f9cf..ef1cccf7117 100644 --- a/arch/powerpc/mm/tlb_low_64e.S +++ b/arch/powerpc/mm/tlb_low_64e.S @@ -189,12 +189,16 @@ normal_tlb_miss: clrrdi r14,r14,3 or r10,r15,r14 +BEGIN_MMU_FTR_SECTION /* Set the TLB reservation and seach for existing entry. Then load * the entry. */ PPC_TLBSRX_DOT(0,r16) ld r14,0(r10) beq normal_tlb_miss_done +MMU_FTR_SECTION_ELSE + ld r14,0(r10) +ALT_MMU_FTR_SECTION_END_IFSET(MMU_FTR_USE_TLBRSRV) finish_normal_tlb_miss: /* Check if required permissions are met */ @@ -241,7 +245,14 @@ finish_normal_tlb_miss: bne 1f li r11,MAS3_SW|MAS3_UW andc r15,r15,r11 -1: mtspr SPRN_MAS7_MAS3,r15 +1: +BEGIN_MMU_FTR_SECTION + srdi r16,r15,32 + mtspr SPRN_MAS3,r15 + mtspr SPRN_MAS7,r16 +MMU_FTR_SECTION_ELSE + mtspr SPRN_MAS7_MAS3,r15 +ALT_MMU_FTR_SECTION_END_IFCLR(MMU_FTR_USE_PAIRED_MAS) tlbwe @@ -311,11 +322,13 @@ virt_page_table_tlb_miss: rlwinm r10,r10,0,16,1 /* Clear TID */ mtspr SPRN_MAS1,r10 1: +BEGIN_MMU_FTR_SECTION /* Search if we already have a TLB entry for that virtual address, and * if we do, bail out. */ PPC_TLBSRX_DOT(0,r16) beq virt_page_table_tlb_miss_done +END_MMU_FTR_SECTION_IFSET(MMU_FTR_USE_TLBRSRV) /* Now, we need to walk the page tables. First check if we are in * range. @@ -367,10 +380,18 @@ virt_page_table_tlb_miss: */ clrldi r11,r15,4 /* remove region ID from RPN */ ori r10,r11,1 /* Or-in SR */ + +BEGIN_MMU_FTR_SECTION + srdi r16,r10,32 + mtspr SPRN_MAS3,r10 + mtspr SPRN_MAS7,r16 +MMU_FTR_SECTION_ELSE mtspr SPRN_MAS7_MAS3,r10 +ALT_MMU_FTR_SECTION_END_IFCLR(MMU_FTR_USE_PAIRED_MAS) tlbwe +BEGIN_MMU_FTR_SECTION virt_page_table_tlb_miss_done: /* We have overriden MAS2:EPN but currently our primary TLB miss @@ -394,6 +415,7 @@ virt_page_table_tlb_miss_done: addi r10,r11,-4 std r10,PACA_EXTLB+EX_TLB_SIZE+EX_TLB_SRR0(r13) 1: +END_MMU_FTR_SECTION_IFSET(MMU_FTR_USE_TLBRSRV) /* Return to caller, normal case */ TLB_MISS_STATS_X(MMSTAT_TLB_MISS_PT_OK); TLB_MISS_EPILOG_SUCCESS @@ -618,7 +640,14 @@ htw_tlb_miss: #else ori r10,r15,(BOOK3E_PAGESZ_4K << MAS3_SPSIZE_SHIFT) #endif + +BEGIN_MMU_FTR_SECTION + srdi r16,r10,32 + mtspr SPRN_MAS3,r10 + mtspr SPRN_MAS7,r16 +MMU_FTR_SECTION_ELSE mtspr SPRN_MAS7_MAS3,r10 +ALT_MMU_FTR_SECTION_END_IFCLR(MMU_FTR_USE_PAIRED_MAS) tlbwe @@ -700,7 +729,14 @@ tlb_load_linear: clrrdi r10,r16,30 /* 1G page index */ clrldi r10,r10,4 /* clear region bits */ ori r10,r10,MAS3_SR|MAS3_SW|MAS3_SX + +BEGIN_MMU_FTR_SECTION + srdi r16,r10,32 + mtspr SPRN_MAS3,r10 + mtspr SPRN_MAS7,r16 +MMU_FTR_SECTION_ELSE mtspr SPRN_MAS7_MAS3,r10 +ALT_MMU_FTR_SECTION_END_IFCLR(MMU_FTR_USE_PAIRED_MAS) tlbwe -- cgit v1.2.3-70-g09d2 From f45c4486f70d0a6502e7499a8664cdc0bba84cd2 Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Tue, 18 Aug 2009 19:08:30 +0000 Subject: powerpc/book3e-64: Move the default cpu table entry Move the default cpu entry table for CONFIG_PPC_BOOK3E_64 to the very end since we will probably want to support both 32-bit and 64-bit kernels for some processors that are higher up in the list. Signed-off-by: Kumar Gala Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/cputable.c | 49 +++++++++++++++++++++++------------------- 1 file changed, 27 insertions(+), 22 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c index 9f38ecb1785..0b9c9135922 100644 --- a/arch/powerpc/kernel/cputable.c +++ b/arch/powerpc/kernel/cputable.c @@ -89,8 +89,12 @@ extern void __restore_cpu_power7(void); #define COMMON_USER_PA6T (COMMON_USER_PPC64 | PPC_FEATURE_PA6T |\ PPC_FEATURE_TRUE_LE | \ PPC_FEATURE_HAS_ALTIVEC_COMP) +#ifdef CONFIG_PPC_BOOK3E_64 +#define COMMON_USER_BOOKE (COMMON_USER_PPC64 | PPC_FEATURE_BOOKE) +#else #define COMMON_USER_BOOKE (PPC_FEATURE_32 | PPC_FEATURE_HAS_MMU | \ PPC_FEATURE_BOOKE) +#endif static struct cpu_spec __initdata cpu_specs[] = { #ifdef CONFIG_PPC_BOOK3S_64 @@ -509,28 +513,6 @@ static struct cpu_spec __initdata cpu_specs[] = { .platform = "power4", } #endif /* CONFIG_PPC_BOOK3S_64 */ -#ifdef CONFIG_PPC_BOOK3E_64 - { /* This is a default entry to get going, to be replaced by - * a real one at some stage - */ -#define CPU_FTRS_BASE_BOOK3E (CPU_FTR_USE_TB | \ - CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_SMT | \ - CPU_FTR_NODSISRALIGN | CPU_FTR_NOEXECUTE) - .pvr_mask = 0x00000000, - .pvr_value = 0x00000000, - .cpu_name = "Book3E", - .cpu_features = CPU_FTRS_BASE_BOOK3E, - .cpu_user_features = COMMON_USER_PPC64, - .mmu_features = MMU_FTR_TYPE_3E | MMU_FTR_USE_TLBILX | - MMU_FTR_USE_TLBIVAX_BCAST | - MMU_FTR_LOCK_BCAST_INVAL, - .icache_bsize = 64, - .dcache_bsize = 64, - .num_pmcs = 0, - .machine_check = machine_check_generic, - .platform = "power6", - }, -#endif #ifdef CONFIG_PPC32 #if CLASSIC_PPC @@ -1846,6 +1828,29 @@ static struct cpu_spec __initdata cpu_specs[] = { } #endif /* CONFIG_E500 */ #endif /* CONFIG_PPC32 */ + +#ifdef CONFIG_PPC_BOOK3E_64 + { /* This is a default entry to get going, to be replaced by + * a real one at some stage + */ +#define CPU_FTRS_BASE_BOOK3E (CPU_FTR_USE_TB | \ + CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_SMT | \ + CPU_FTR_NODSISRALIGN | CPU_FTR_NOEXECUTE) + .pvr_mask = 0x00000000, + .pvr_value = 0x00000000, + .cpu_name = "Book3E", + .cpu_features = CPU_FTRS_BASE_BOOK3E, + .cpu_user_features = COMMON_USER_PPC64, + .mmu_features = MMU_FTR_TYPE_3E | MMU_FTR_USE_TLBILX | + MMU_FTR_USE_TLBIVAX_BCAST | + MMU_FTR_LOCK_BCAST_INVAL, + .icache_bsize = 64, + .dcache_bsize = 64, + .num_pmcs = 0, + .machine_check = machine_check_generic, + .platform = "power6", + }, +#endif }; static struct cpu_spec the_cpu_spec; -- cgit v1.2.3-70-g09d2 From 6c188829d2c20a1d02aedb13db34b3ca2a8f0dc4 Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Tue, 18 Aug 2009 19:08:31 +0000 Subject: powerpc/book3e-64: Wait til generic_calibrate_decr to enable decrementer Match what we do on 32-bit Book-E processors and enable the decrementer in generic_calibrate_decr. We need to make sure we disable the decrementer early in boot since we currently use lazy (soft) interrupt on 64-bit Book-E and possible get a decrementer exception before we are ready for it. Signed-off-by: Kumar Gala Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/exceptions-64e.S | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/kernel/exceptions-64e.S b/arch/powerpc/kernel/exceptions-64e.S index 695d4847d22..3611b0e7d46 100644 --- a/arch/powerpc/kernel/exceptions-64e.S +++ b/arch/powerpc/kernel/exceptions-64e.S @@ -774,9 +774,11 @@ _STATIC(init_thread_book3e) /* Make sure interrupts are off */ wrteei 0 - /* disable watchdog and FIT and enable DEC interrupts */ - lis r3,TCR_DIE@h + /* disable all timers and clear out status */ + li r3,0 mtspr SPRN_TCR,r3 + mfspr r3,SPRN_TSR + mtspr SPRN_TSR,r3 blr -- cgit v1.2.3-70-g09d2 From 4b98d9e713a03bd79ced8800e24a56359f9effbf Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Tue, 18 Aug 2009 19:08:32 +0000 Subject: powerpc/book3e-64: Add helper function to setup IVORs Not all 64-bit Book-3E parts will have fixed IVORs so add a function that cpusetup code can call to setup the base IVORs (0..15) to match the fixed offsets. We need to 'or' part of interrupt_base_book3e into the IVORs since on parts that have them the IVPR doesn't extend as far down. Signed-off-by: Kumar Gala Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/include/asm/exception-64e.h | 4 ++++ arch/powerpc/kernel/exceptions-64e.S | 19 +++++++++++++++++++ 2 files changed, 23 insertions(+) (limited to 'arch') diff --git a/arch/powerpc/include/asm/exception-64e.h b/arch/powerpc/include/asm/exception-64e.h index 94cb3d79d12..6d53f311d94 100644 --- a/arch/powerpc/include/asm/exception-64e.h +++ b/arch/powerpc/include/asm/exception-64e.h @@ -196,6 +196,10 @@ exc_##label##_book3e: #define TLB_MISS_STATS_SAVE_INFO #endif +#define SET_IVOR(vector_number, vector_offset) \ + li r3,vector_offset@l; \ + ori r3,r3,interrupt_base_book3e@l; \ + mtspr SPRN_IVOR##vector_number,r3; #endif /* _ASM_POWERPC_EXCEPTION_64E_H */ diff --git a/arch/powerpc/kernel/exceptions-64e.S b/arch/powerpc/kernel/exceptions-64e.S index 3611b0e7d46..662236c7224 100644 --- a/arch/powerpc/kernel/exceptions-64e.S +++ b/arch/powerpc/kernel/exceptions-64e.S @@ -782,5 +782,24 @@ _STATIC(init_thread_book3e) blr +_GLOBAL(__setup_base_ivors) + SET_IVOR(0, 0x020) /* Critical Input */ + SET_IVOR(1, 0x000) /* Machine Check */ + SET_IVOR(2, 0x060) /* Data Storage */ + SET_IVOR(3, 0x080) /* Instruction Storage */ + SET_IVOR(4, 0x0a0) /* External Input */ + SET_IVOR(5, 0x0c0) /* Alignment */ + SET_IVOR(6, 0x0e0) /* Program */ + SET_IVOR(7, 0x100) /* FP Unavailable */ + SET_IVOR(8, 0x120) /* System Call */ + SET_IVOR(9, 0x140) /* Auxiliary Processor Unavailable */ + SET_IVOR(10, 0x160) /* Decrementer */ + SET_IVOR(11, 0x180) /* Fixed Interval Timer */ + SET_IVOR(12, 0x1a0) /* Watchdog Timer */ + SET_IVOR(13, 0x1c0) /* Data TLB Error */ + SET_IVOR(14, 0x1e0) /* Instruction TLB Error */ + SET_IVOR(15, 0x040) /* Debug */ + sync + blr -- cgit v1.2.3-70-g09d2 From bb1af71ecbfdbecbe9f7e43f703da5840b76c2e4 Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Tue, 18 Aug 2009 19:08:33 +0000 Subject: powerpc/book3e-64: Add support to initial_tlb_book3e for non-HES TLB We now search through TLBnCFG looking for the first array that has IPROT support (we assume that there is only one). If that TLB has hardware entry select (HES) support we use the existing code and with the proper TLB select (the HES code still needs to clean up bolted entries from firmware). The non-HES code is pretty similiar to the 32-bit FSL Book-E code but does make some new assumtions (like that we have tlbilx) and simplifies things down a bit. Signed-off-by: Kumar Gala Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/include/asm/reg_booke.h | 2 + arch/powerpc/kernel/exceptions-64e.S | 204 ++++++++++++++++++++++++++++++++++- 2 files changed, 202 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/include/asm/reg_booke.h b/arch/powerpc/include/asm/reg_booke.h index 9bb81d99b76..3bf78350552 100644 --- a/arch/powerpc/include/asm/reg_booke.h +++ b/arch/powerpc/include/asm/reg_booke.h @@ -108,6 +108,8 @@ #define SPRN_PID2 0x27A /* Process ID Register 2 */ #define SPRN_TLB0CFG 0x2B0 /* TLB 0 Config Register */ #define SPRN_TLB1CFG 0x2B1 /* TLB 1 Config Register */ +#define SPRN_TLB2CFG 0x2B2 /* TLB 2 Config Register */ +#define SPRN_TLB3CFG 0x2B3 /* TLB 3 Config Register */ #define SPRN_EPR 0x2BE /* External Proxy Register */ #define SPRN_CCR1 0x378 /* Core Configuration Register 1 */ #define SPRN_ZPR 0x3B0 /* Zone Protection Register (40x) */ diff --git a/arch/powerpc/kernel/exceptions-64e.S b/arch/powerpc/kernel/exceptions-64e.S index 662236c7224..9048f96237f 100644 --- a/arch/powerpc/kernel/exceptions-64e.S +++ b/arch/powerpc/kernel/exceptions-64e.S @@ -616,18 +616,214 @@ bad_stack_book3e: * Setup the initial TLB for a core. This current implementation * assume that whatever we are running off will not conflict with * the new mapping at PAGE_OFFSET. - * We also make various assumptions about the processor we run on, - * this might have to be made more flexible based on the content - * of MMUCFG and friends. */ _GLOBAL(initial_tlb_book3e) + /* Look for the first TLB with IPROT set */ + mfspr r4,SPRN_TLB0CFG + andi. r3,r4,TLBnCFG_IPROT + lis r3,MAS0_TLBSEL(0)@h + bne found_iprot + + mfspr r4,SPRN_TLB1CFG + andi. r3,r4,TLBnCFG_IPROT + lis r3,MAS0_TLBSEL(1)@h + bne found_iprot + + mfspr r4,SPRN_TLB2CFG + andi. r3,r4,TLBnCFG_IPROT + lis r3,MAS0_TLBSEL(2)@h + bne found_iprot + + lis r3,MAS0_TLBSEL(3)@h + mfspr r4,SPRN_TLB3CFG + /* fall through */ + +found_iprot: + andi. r5,r4,TLBnCFG_HES + bne have_hes + + mflr r8 /* save LR */ +/* 1. Find the index of the entry we're executing in + * + * r3 = MAS0_TLBSEL (for the iprot array) + * r4 = SPRN_TLBnCFG + */ + bl invstr /* Find our address */ +invstr: mflr r6 /* Make it accessible */ + mfmsr r7 + rlwinm r5,r7,27,31,31 /* extract MSR[IS] */ + mfspr r7,SPRN_PID + slwi r7,r7,16 + or r7,r7,r5 + mtspr SPRN_MAS6,r7 + tlbsx 0,r6 /* search MSR[IS], SPID=PID */ + + mfspr r3,SPRN_MAS0 + rlwinm r5,r3,16,20,31 /* Extract MAS0(Entry) */ + + mfspr r7,SPRN_MAS1 /* Insure IPROT set */ + oris r7,r7,MAS1_IPROT@h + mtspr SPRN_MAS1,r7 + tlbwe + +/* 2. Invalidate all entries except the entry we're executing in + * + * r3 = MAS0 w/TLBSEL & ESEL for the entry we are running in + * r4 = SPRN_TLBnCFG + * r5 = ESEL of entry we are running in + */ + andi. r4,r4,TLBnCFG_N_ENTRY /* Extract # entries */ + li r6,0 /* Set Entry counter to 0 */ +1: mr r7,r3 /* Set MAS0(TLBSEL) */ + rlwimi r7,r6,16,4,15 /* Setup MAS0 = TLBSEL | ESEL(r6) */ + mtspr SPRN_MAS0,r7 + tlbre + mfspr r7,SPRN_MAS1 + rlwinm r7,r7,0,2,31 /* Clear MAS1 Valid and IPROT */ + cmpw r5,r6 + beq skpinv /* Dont update the current execution TLB */ + mtspr SPRN_MAS1,r7 + tlbwe + isync +skpinv: addi r6,r6,1 /* Increment */ + cmpw r6,r4 /* Are we done? */ + bne 1b /* If not, repeat */ + + /* Invalidate all TLBs */ + PPC_TLBILX_ALL(0,0) + sync + isync + +/* 3. Setup a temp mapping and jump to it + * + * r3 = MAS0 w/TLBSEL & ESEL for the entry we are running in + * r5 = ESEL of entry we are running in + */ + andi. r7,r5,0x1 /* Find an entry not used and is non-zero */ + addi r7,r7,0x1 + mr r4,r3 /* Set MAS0(TLBSEL) = 1 */ + mtspr SPRN_MAS0,r4 + tlbre + + rlwimi r4,r7,16,4,15 /* Setup MAS0 = TLBSEL | ESEL(r7) */ + mtspr SPRN_MAS0,r4 + + mfspr r7,SPRN_MAS1 + xori r6,r7,MAS1_TS /* Setup TMP mapping in the other Address space */ + mtspr SPRN_MAS1,r6 + + tlbwe + + mfmsr r6 + xori r6,r6,MSR_IS + mtspr SPRN_SRR1,r6 + bl 1f /* Find our address */ +1: mflr r6 + addi r6,r6,(2f - 1b) + mtspr SPRN_SRR0,r6 + rfi +2: + +/* 4. Clear out PIDs & Search info + * + * r3 = MAS0 w/TLBSEL & ESEL for the entry we started in + * r4 = MAS0 w/TLBSEL & ESEL for the temp mapping + * r5 = MAS3 + */ + li r6,0 + mtspr SPRN_MAS6,r6 + mtspr SPRN_PID,r6 + +/* 5. Invalidate mapping we started in + * + * r3 = MAS0 w/TLBSEL & ESEL for the entry we started in + * r4 = MAS0 w/TLBSEL & ESEL for the temp mapping + * r5 = MAS3 + */ + mtspr SPRN_MAS0,r3 + tlbre + mfspr r6,SPRN_MAS1 + rlwinm r6,r6,0,2,0 /* clear IPROT */ + mtspr SPRN_MAS1,r6 + tlbwe + + /* Invalidate TLB1 */ + PPC_TLBILX_ALL(0,0) + sync + isync + +/* The mapping only needs to be cache-coherent on SMP */ +#ifdef CONFIG_SMP +#define M_IF_SMP MAS2_M +#else +#define M_IF_SMP 0 +#endif + +/* 6. Setup KERNELBASE mapping in TLB[0] + * + * r3 = MAS0 w/TLBSEL & ESEL for the entry we started in + * r4 = MAS0 w/TLBSEL & ESEL for the temp mapping + * r5 = MAS3 + */ + rlwinm r3,r3,0,16,3 /* clear ESEL */ + mtspr SPRN_MAS0,r3 + lis r6,(MAS1_VALID|MAS1_IPROT)@h + ori r6,r6,(MAS1_TSIZE(BOOK3E_PAGESZ_1GB))@l + mtspr SPRN_MAS1,r6 + + LOAD_REG_IMMEDIATE(r6, PAGE_OFFSET | M_IF_SMP) + mtspr SPRN_MAS2,r6 + + rlwinm r5,r5,0,0,25 + ori r5,r5,MAS3_SR | MAS3_SW | MAS3_SX + mtspr SPRN_MAS3,r5 + li r5,-1 + rlwinm r5,r5,0,0,25 + + tlbwe + +/* 7. Jump to KERNELBASE mapping + * + * r4 = MAS0 w/TLBSEL & ESEL for the temp mapping + */ + /* Now we branch the new virtual address mapped by this entry */ + LOAD_REG_IMMEDIATE(r6,2f) + lis r7,MSR_KERNEL@h + ori r7,r7,MSR_KERNEL@l + mtspr SPRN_SRR0,r6 + mtspr SPRN_SRR1,r7 + rfi /* start execution out of TLB1[0] entry */ +2: + +/* 8. Clear out the temp mapping + * + * r4 = MAS0 w/TLBSEL & ESEL for the entry we are running in + */ + mtspr SPRN_MAS0,r4 + tlbre + mfspr r5,SPRN_MAS1 + rlwinm r5,r5,0,2,0 /* clear IPROT */ + mtspr SPRN_MAS1,r5 + tlbwe + + /* Invalidate TLB1 */ + PPC_TLBILX_ALL(0,0) + sync + isync + + /* We translate LR and return */ + tovirt(r8,r8) + mtlr r8 + blr + +have_hes: /* Setup MAS 0,1,2,3 and 7 for tlbwe of a 1G entry that maps the * kernel linear mapping. We also set MAS8 once for all here though * that will have to be made dependent on whether we are running under * a hypervisor I suppose. */ - li r3,MAS0_HES | MAS0_WQ_ALLWAYS + ori r3,r3,MAS0_HES | MAS0_WQ_ALLWAYS mtspr SPRN_MAS0,r3 lis r3,(MAS1_VALID | MAS1_IPROT)@h ori r3,r3,BOOK3E_PAGESZ_1GB << MAS1_TSIZE_SHIFT -- cgit v1.2.3-70-g09d2 From ae14e13a4c8bb091dfd5606fd76c9cd272090ab7 Mon Sep 17 00:00:00 2001 From: Grant Likely Date: Tue, 25 Aug 2009 20:07:02 +0000 Subject: powerpc/pci: Remove dead checks for CONFIG_PPC_OF PPC_OF is always selected for arch/powerpc. This patch removes the stale #defines Signed-off-by: Grant Likely Acked-by: Stephen Rothwell Acked-by: Kumar Gala Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/pci-common.c | 8 -------- arch/powerpc/kernel/pci_32.c | 9 --------- 2 files changed, 17 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/kernel/pci-common.c b/arch/powerpc/kernel/pci-common.c index 7585f1fc26d..158a78ae634 100644 --- a/arch/powerpc/kernel/pci-common.c +++ b/arch/powerpc/kernel/pci-common.c @@ -176,8 +176,6 @@ int pci_domain_nr(struct pci_bus *bus) } EXPORT_SYMBOL(pci_domain_nr); -#ifdef CONFIG_PPC_OF - /* This routine is meant to be used early during boot, when the * PCI bus numbers have not yet been assigned, and you need to * issue PCI config cycles to an OF device. @@ -210,17 +208,11 @@ static ssize_t pci_show_devspec(struct device *dev, return sprintf(buf, "%s", np->full_name); } static DEVICE_ATTR(devspec, S_IRUGO, pci_show_devspec, NULL); -#endif /* CONFIG_PPC_OF */ /* Add sysfs properties */ int pcibios_add_platform_entries(struct pci_dev *pdev) { -#ifdef CONFIG_PPC_OF return device_create_file(&pdev->dev, &dev_attr_devspec); -#else - return 0; -#endif /* CONFIG_PPC_OF */ - } char __devinit *pcibios_setup(char *str) diff --git a/arch/powerpc/kernel/pci_32.c b/arch/powerpc/kernel/pci_32.c index 3ae1c666ff9..1e807fe7ad2 100644 --- a/arch/powerpc/kernel/pci_32.c +++ b/arch/powerpc/kernel/pci_32.c @@ -34,9 +34,7 @@ int pcibios_assign_bus_offset = 1; void pcibios_make_OF_bus_map(void); static void fixup_cpc710_pci64(struct pci_dev* dev); -#ifdef CONFIG_PPC_OF static u8* pci_to_OF_bus_map; -#endif /* By default, we don't re-assign bus numbers. We do this only on * some pmacs @@ -83,7 +81,6 @@ fixup_cpc710_pci64(struct pci_dev* dev) } DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_CPC710_PCI64, fixup_cpc710_pci64); -#ifdef CONFIG_PPC_OF /* * Functions below are used on OpenFirmware machines. */ @@ -357,12 +354,6 @@ pci_create_OF_bus_map(void) } } -#else /* CONFIG_PPC_OF */ -void pcibios_make_OF_bus_map(void) -{ -} -#endif /* CONFIG_PPC_OF */ - static void __devinit pcibios_scan_phb(struct pci_controller *hose) { struct pci_bus *bus; -- cgit v1.2.3-70-g09d2 From fbe65447197789a3ccccc27755956f6a4c445089 Mon Sep 17 00:00:00 2001 From: Grant Likely Date: Tue, 25 Aug 2009 20:07:11 +0000 Subject: powerpc/pci: move pci_64.c device tree scanning code into pci-common.c The PCI device tree scanning code in pci_64.c is some useful functionality. It allows PCI devices to be described in the device tree instead of being probed for, which in turn allows pci devices to use all of the device tree facilities to describe complex PCI bus architectures like GPIO and IRQ routing (perhaps not a common situation for desktop or server systems, but useful for embedded systems with on-board PCI devices). This patch moves the device tree scanning into pci-common.c so it is available for 32-bit powerpc machines too. Signed-off-by: Grant Likely Acked-by: Kumar Gala Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/include/asm/pci-bridge.h | 5 - arch/powerpc/include/asm/pci.h | 5 + arch/powerpc/kernel/Makefile | 2 +- arch/powerpc/kernel/pci-common.c | 1 - arch/powerpc/kernel/pci_64.c | 289 --------------------------- arch/powerpc/kernel/pci_of_scan.c | 358 ++++++++++++++++++++++++++++++++++ 6 files changed, 364 insertions(+), 296 deletions(-) create mode 100644 arch/powerpc/kernel/pci_of_scan.c (limited to 'arch') diff --git a/arch/powerpc/include/asm/pci-bridge.h b/arch/powerpc/include/asm/pci-bridge.h index 4c61fa0b8d7..3faf575f6b0 100644 --- a/arch/powerpc/include/asm/pci-bridge.h +++ b/arch/powerpc/include/asm/pci-bridge.h @@ -284,11 +284,6 @@ static inline int isa_vaddr_is_ioport(void __iomem *address) extern int pcibios_unmap_io_space(struct pci_bus *bus); extern int pcibios_map_io_space(struct pci_bus *bus); -/* Return values for ppc_md.pci_probe_mode function */ -#define PCI_PROBE_NONE -1 /* Don't look at this bus at all */ -#define PCI_PROBE_NORMAL 0 /* Do normal PCI probing */ -#define PCI_PROBE_DEVTREE 1 /* Instantiate from device tree */ - #ifdef CONFIG_NUMA #define PHB_SET_NODE(PHB, NODE) ((PHB)->node = (NODE)) #else diff --git a/arch/powerpc/include/asm/pci.h b/arch/powerpc/include/asm/pci.h index 7ae46d7e270..b856a837b4a 100644 --- a/arch/powerpc/include/asm/pci.h +++ b/arch/powerpc/include/asm/pci.h @@ -22,6 +22,11 @@ #include +/* Return values for ppc_md.pci_probe_mode function */ +#define PCI_PROBE_NONE -1 /* Don't look at this bus at all */ +#define PCI_PROBE_NORMAL 0 /* Do normal PCI probing */ +#define PCI_PROBE_DEVTREE 1 /* Instantiate from device tree */ + #define PCIBIOS_MIN_IO 0x1000 #define PCIBIOS_MIN_MEM 0x10000000 diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile index 7c83edbc215..569f79ccd31 100644 --- a/arch/powerpc/kernel/Makefile +++ b/arch/powerpc/kernel/Makefile @@ -88,7 +88,7 @@ obj-$(CONFIG_SWIOTLB) += dma-swiotlb.o pci64-$(CONFIG_PPC64) += pci_dn.o isa-bridge.o obj-$(CONFIG_PCI) += pci_$(CONFIG_WORD_SIZE).o $(pci64-y) \ - pci-common.o + pci-common.o pci_of_scan.o obj-$(CONFIG_PCI_MSI) += msi.o obj-$(CONFIG_KEXEC) += machine_kexec.o crash.o \ machine_kexec_$(CONFIG_WORD_SIZE).o diff --git a/arch/powerpc/kernel/pci-common.c b/arch/powerpc/kernel/pci-common.c index 158a78ae634..725ea9144e3 100644 --- a/arch/powerpc/kernel/pci-common.c +++ b/arch/powerpc/kernel/pci-common.c @@ -1617,4 +1617,3 @@ void __devinit pcibios_setup_phb_resources(struct pci_controller *hose) (unsigned long)hose->io_base_virt - _IO_BASE); } - diff --git a/arch/powerpc/kernel/pci_64.c b/arch/powerpc/kernel/pci_64.c index 9e8902fa14c..4d5b4ced7e4 100644 --- a/arch/powerpc/kernel/pci_64.c +++ b/arch/powerpc/kernel/pci_64.c @@ -43,295 +43,6 @@ unsigned long pci_probe_only = 1; unsigned long pci_io_base = ISA_IO_BASE; EXPORT_SYMBOL(pci_io_base); -static u32 get_int_prop(struct device_node *np, const char *name, u32 def) -{ - const u32 *prop; - int len; - - prop = of_get_property(np, name, &len); - if (prop && len >= 4) - return *prop; - return def; -} - -static unsigned int pci_parse_of_flags(u32 addr0, int bridge) -{ - unsigned int flags = 0; - - if (addr0 & 0x02000000) { - flags = IORESOURCE_MEM | PCI_BASE_ADDRESS_SPACE_MEMORY; - flags |= (addr0 >> 22) & PCI_BASE_ADDRESS_MEM_TYPE_64; - flags |= (addr0 >> 28) & PCI_BASE_ADDRESS_MEM_TYPE_1M; - if (addr0 & 0x40000000) - flags |= IORESOURCE_PREFETCH - | PCI_BASE_ADDRESS_MEM_PREFETCH; - /* Note: We don't know whether the ROM has been left enabled - * by the firmware or not. We mark it as disabled (ie, we do - * not set the IORESOURCE_ROM_ENABLE flag) for now rather than - * do a config space read, it will be force-enabled if needed - */ - if (!bridge && (addr0 & 0xff) == 0x30) - flags |= IORESOURCE_READONLY; - } else if (addr0 & 0x01000000) - flags = IORESOURCE_IO | PCI_BASE_ADDRESS_SPACE_IO; - if (flags) - flags |= IORESOURCE_SIZEALIGN; - return flags; -} - - -static void pci_parse_of_addrs(struct device_node *node, struct pci_dev *dev) -{ - u64 base, size; - unsigned int flags; - struct resource *res; - const u32 *addrs; - u32 i; - int proplen; - - addrs = of_get_property(node, "assigned-addresses", &proplen); - if (!addrs) - return; - pr_debug(" parse addresses (%d bytes) @ %p\n", proplen, addrs); - for (; proplen >= 20; proplen -= 20, addrs += 5) { - flags = pci_parse_of_flags(addrs[0], 0); - if (!flags) - continue; - base = of_read_number(&addrs[1], 2); - size = of_read_number(&addrs[3], 2); - if (!size) - continue; - i = addrs[0] & 0xff; - pr_debug(" base: %llx, size: %llx, i: %x\n", - (unsigned long long)base, - (unsigned long long)size, i); - - if (PCI_BASE_ADDRESS_0 <= i && i <= PCI_BASE_ADDRESS_5) { - res = &dev->resource[(i - PCI_BASE_ADDRESS_0) >> 2]; - } else if (i == dev->rom_base_reg) { - res = &dev->resource[PCI_ROM_RESOURCE]; - flags |= IORESOURCE_READONLY | IORESOURCE_CACHEABLE; - } else { - printk(KERN_ERR "PCI: bad cfg reg num 0x%x\n", i); - continue; - } - res->start = base; - res->end = base + size - 1; - res->flags = flags; - res->name = pci_name(dev); - } -} - -struct pci_dev *of_create_pci_dev(struct device_node *node, - struct pci_bus *bus, int devfn) -{ - struct pci_dev *dev; - const char *type; - - dev = alloc_pci_dev(); - if (!dev) - return NULL; - type = of_get_property(node, "device_type", NULL); - if (type == NULL) - type = ""; - - pr_debug(" create device, devfn: %x, type: %s\n", devfn, type); - - dev->bus = bus; - dev->sysdata = node; - dev->dev.parent = bus->bridge; - dev->dev.bus = &pci_bus_type; - dev->devfn = devfn; - dev->multifunction = 0; /* maybe a lie? */ - - dev->vendor = get_int_prop(node, "vendor-id", 0xffff); - dev->device = get_int_prop(node, "device-id", 0xffff); - dev->subsystem_vendor = get_int_prop(node, "subsystem-vendor-id", 0); - dev->subsystem_device = get_int_prop(node, "subsystem-id", 0); - - dev->cfg_size = pci_cfg_space_size(dev); - - dev_set_name(&dev->dev, "%04x:%02x:%02x.%d", pci_domain_nr(bus), - dev->bus->number, PCI_SLOT(devfn), PCI_FUNC(devfn)); - dev->class = get_int_prop(node, "class-code", 0); - dev->revision = get_int_prop(node, "revision-id", 0); - - pr_debug(" class: 0x%x\n", dev->class); - pr_debug(" revision: 0x%x\n", dev->revision); - - dev->current_state = 4; /* unknown power state */ - dev->error_state = pci_channel_io_normal; - dev->dma_mask = 0xffffffff; - - if (!strcmp(type, "pci") || !strcmp(type, "pciex")) { - /* a PCI-PCI bridge */ - dev->hdr_type = PCI_HEADER_TYPE_BRIDGE; - dev->rom_base_reg = PCI_ROM_ADDRESS1; - } else if (!strcmp(type, "cardbus")) { - dev->hdr_type = PCI_HEADER_TYPE_CARDBUS; - } else { - dev->hdr_type = PCI_HEADER_TYPE_NORMAL; - dev->rom_base_reg = PCI_ROM_ADDRESS; - /* Maybe do a default OF mapping here */ - dev->irq = NO_IRQ; - } - - pci_parse_of_addrs(node, dev); - - pr_debug(" adding to system ...\n"); - - pci_device_add(dev, bus); - - return dev; -} -EXPORT_SYMBOL(of_create_pci_dev); - -static void __devinit __of_scan_bus(struct device_node *node, - struct pci_bus *bus, int rescan_existing) -{ - struct device_node *child; - const u32 *reg; - int reglen, devfn; - struct pci_dev *dev; - - pr_debug("of_scan_bus(%s) bus no %d... \n", - node->full_name, bus->number); - - /* Scan direct children */ - for_each_child_of_node(node, child) { - pr_debug(" * %s\n", child->full_name); - reg = of_get_property(child, "reg", ®len); - if (reg == NULL || reglen < 20) - continue; - devfn = (reg[0] >> 8) & 0xff; - - /* create a new pci_dev for this device */ - dev = of_create_pci_dev(child, bus, devfn); - if (!dev) - continue; - pr_debug(" dev header type: %x\n", dev->hdr_type); - } - - /* Apply all fixups necessary. We don't fixup the bus "self" - * for an existing bridge that is being rescanned - */ - if (!rescan_existing) - pcibios_setup_bus_self(bus); - pcibios_setup_bus_devices(bus); - - /* Now scan child busses */ - list_for_each_entry(dev, &bus->devices, bus_list) { - if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE || - dev->hdr_type == PCI_HEADER_TYPE_CARDBUS) { - struct device_node *child = pci_device_to_OF_node(dev); - if (dev) - of_scan_pci_bridge(child, dev); - } - } -} - -void __devinit of_scan_bus(struct device_node *node, - struct pci_bus *bus) -{ - __of_scan_bus(node, bus, 0); -} -EXPORT_SYMBOL_GPL(of_scan_bus); - -void __devinit of_rescan_bus(struct device_node *node, - struct pci_bus *bus) -{ - __of_scan_bus(node, bus, 1); -} -EXPORT_SYMBOL_GPL(of_rescan_bus); - -void __devinit of_scan_pci_bridge(struct device_node *node, - struct pci_dev *dev) -{ - struct pci_bus *bus; - const u32 *busrange, *ranges; - int len, i, mode; - struct resource *res; - unsigned int flags; - u64 size; - - pr_debug("of_scan_pci_bridge(%s)\n", node->full_name); - - /* parse bus-range property */ - busrange = of_get_property(node, "bus-range", &len); - if (busrange == NULL || len != 8) { - printk(KERN_DEBUG "Can't get bus-range for PCI-PCI bridge %s\n", - node->full_name); - return; - } - ranges = of_get_property(node, "ranges", &len); - if (ranges == NULL) { - printk(KERN_DEBUG "Can't get ranges for PCI-PCI bridge %s\n", - node->full_name); - return; - } - - bus = pci_add_new_bus(dev->bus, dev, busrange[0]); - if (!bus) { - printk(KERN_ERR "Failed to create pci bus for %s\n", - node->full_name); - return; - } - - bus->primary = dev->bus->number; - bus->subordinate = busrange[1]; - bus->bridge_ctl = 0; - bus->sysdata = node; - - /* parse ranges property */ - /* PCI #address-cells == 3 and #size-cells == 2 always */ - res = &dev->resource[PCI_BRIDGE_RESOURCES]; - for (i = 0; i < PCI_NUM_RESOURCES - PCI_BRIDGE_RESOURCES; ++i) { - res->flags = 0; - bus->resource[i] = res; - ++res; - } - i = 1; - for (; len >= 32; len -= 32, ranges += 8) { - flags = pci_parse_of_flags(ranges[0], 1); - size = of_read_number(&ranges[6], 2); - if (flags == 0 || size == 0) - continue; - if (flags & IORESOURCE_IO) { - res = bus->resource[0]; - if (res->flags) { - printk(KERN_ERR "PCI: ignoring extra I/O range" - " for bridge %s\n", node->full_name); - continue; - } - } else { - if (i >= PCI_NUM_RESOURCES - PCI_BRIDGE_RESOURCES) { - printk(KERN_ERR "PCI: too many memory ranges" - " for bridge %s\n", node->full_name); - continue; - } - res = bus->resource[i]; - ++i; - } - res->start = of_read_number(&ranges[1], 2); - res->end = res->start + size - 1; - res->flags = flags; - } - sprintf(bus->name, "PCI Bus %04x:%02x", pci_domain_nr(bus), - bus->number); - pr_debug(" bus name: %s\n", bus->name); - - mode = PCI_PROBE_NORMAL; - if (ppc_md.pci_probe_mode) - mode = ppc_md.pci_probe_mode(bus); - pr_debug(" probe mode: %d\n", mode); - - if (mode == PCI_PROBE_DEVTREE) - of_scan_bus(node, bus); - else if (mode == PCI_PROBE_NORMAL) - pci_scan_child_bus(bus); -} -EXPORT_SYMBOL(of_scan_pci_bridge); - void __devinit scan_phb(struct pci_controller *hose) { struct pci_bus *bus; diff --git a/arch/powerpc/kernel/pci_of_scan.c b/arch/powerpc/kernel/pci_of_scan.c new file mode 100644 index 00000000000..72c31bcb7aa --- /dev/null +++ b/arch/powerpc/kernel/pci_of_scan.c @@ -0,0 +1,358 @@ +/* + * Helper routines to scan the device tree for PCI devices and busses + * + * Migrated out of PowerPC architecture pci_64.c file by Grant Likely + * so that these routines are available for + * 32 bit also. + * + * Copyright (C) 2003 Anton Blanchard , IBM + * Rework, based on alpha PCI code. + * Copyright (c) 2009 Secret Lab Technologies Ltd. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + */ + +#include +#include +#include + +/** + * get_int_prop - Decode a u32 from a device tree property + */ +static u32 get_int_prop(struct device_node *np, const char *name, u32 def) +{ + const u32 *prop; + int len; + + prop = of_get_property(np, name, &len); + if (prop && len >= 4) + return *prop; + return def; +} + +/** + * pci_parse_of_flags - Parse the flags cell of a device tree PCI address + * @addr0: value of 1st cell of a device tree PCI address. + * @bridge: Set this flag if the address is from a bridge 'ranges' property + */ +unsigned int pci_parse_of_flags(u32 addr0, int bridge) +{ + unsigned int flags = 0; + + if (addr0 & 0x02000000) { + flags = IORESOURCE_MEM | PCI_BASE_ADDRESS_SPACE_MEMORY; + flags |= (addr0 >> 22) & PCI_BASE_ADDRESS_MEM_TYPE_64; + flags |= (addr0 >> 28) & PCI_BASE_ADDRESS_MEM_TYPE_1M; + if (addr0 & 0x40000000) + flags |= IORESOURCE_PREFETCH + | PCI_BASE_ADDRESS_MEM_PREFETCH; + /* Note: We don't know whether the ROM has been left enabled + * by the firmware or not. We mark it as disabled (ie, we do + * not set the IORESOURCE_ROM_ENABLE flag) for now rather than + * do a config space read, it will be force-enabled if needed + */ + if (!bridge && (addr0 & 0xff) == 0x30) + flags |= IORESOURCE_READONLY; + } else if (addr0 & 0x01000000) + flags = IORESOURCE_IO | PCI_BASE_ADDRESS_SPACE_IO; + if (flags) + flags |= IORESOURCE_SIZEALIGN; + return flags; +} + +/** + * of_pci_parse_addrs - Parse PCI addresses assigned in the device tree node + * @node: device tree node for the PCI device + * @dev: pci_dev structure for the device + * + * This function parses the 'assigned-addresses' property of a PCI devices' + * device tree node and writes them into the associated pci_dev structure. + */ +static void of_pci_parse_addrs(struct device_node *node, struct pci_dev *dev) +{ + u64 base, size; + unsigned int flags; + struct resource *res; + const u32 *addrs; + u32 i; + int proplen; + + addrs = of_get_property(node, "assigned-addresses", &proplen); + if (!addrs) + return; + pr_debug(" parse addresses (%d bytes) @ %p\n", proplen, addrs); + for (; proplen >= 20; proplen -= 20, addrs += 5) { + flags = pci_parse_of_flags(addrs[0], 0); + if (!flags) + continue; + base = of_read_number(&addrs[1], 2); + size = of_read_number(&addrs[3], 2); + if (!size) + continue; + i = addrs[0] & 0xff; + pr_debug(" base: %llx, size: %llx, i: %x\n", + (unsigned long long)base, + (unsigned long long)size, i); + + if (PCI_BASE_ADDRESS_0 <= i && i <= PCI_BASE_ADDRESS_5) { + res = &dev->resource[(i - PCI_BASE_ADDRESS_0) >> 2]; + } else if (i == dev->rom_base_reg) { + res = &dev->resource[PCI_ROM_RESOURCE]; + flags |= IORESOURCE_READONLY | IORESOURCE_CACHEABLE; + } else { + printk(KERN_ERR "PCI: bad cfg reg num 0x%x\n", i); + continue; + } + res->start = base; + res->end = base + size - 1; + res->flags = flags; + res->name = pci_name(dev); + } +} + +/** + * of_create_pci_dev - Given a device tree node on a pci bus, create a pci_dev + * @node: device tree node pointer + * @bus: bus the device is sitting on + * @devfn: PCI function number, extracted from device tree by caller. + */ +struct pci_dev *of_create_pci_dev(struct device_node *node, + struct pci_bus *bus, int devfn) +{ + struct pci_dev *dev; + const char *type; + + dev = alloc_pci_dev(); + if (!dev) + return NULL; + type = of_get_property(node, "device_type", NULL); + if (type == NULL) + type = ""; + + pr_debug(" create device, devfn: %x, type: %s\n", devfn, type); + + dev->bus = bus; + dev->sysdata = node; + dev->dev.parent = bus->bridge; + dev->dev.bus = &pci_bus_type; + dev->devfn = devfn; + dev->multifunction = 0; /* maybe a lie? */ + + dev->vendor = get_int_prop(node, "vendor-id", 0xffff); + dev->device = get_int_prop(node, "device-id", 0xffff); + dev->subsystem_vendor = get_int_prop(node, "subsystem-vendor-id", 0); + dev->subsystem_device = get_int_prop(node, "subsystem-id", 0); + + dev->cfg_size = pci_cfg_space_size(dev); + + dev_set_name(&dev->dev, "%04x:%02x:%02x.%d", pci_domain_nr(bus), + dev->bus->number, PCI_SLOT(devfn), PCI_FUNC(devfn)); + dev->class = get_int_prop(node, "class-code", 0); + dev->revision = get_int_prop(node, "revision-id", 0); + + pr_debug(" class: 0x%x\n", dev->class); + pr_debug(" revision: 0x%x\n", dev->revision); + + dev->current_state = 4; /* unknown power state */ + dev->error_state = pci_channel_io_normal; + dev->dma_mask = 0xffffffff; + + if (!strcmp(type, "pci") || !strcmp(type, "pciex")) { + /* a PCI-PCI bridge */ + dev->hdr_type = PCI_HEADER_TYPE_BRIDGE; + dev->rom_base_reg = PCI_ROM_ADDRESS1; + } else if (!strcmp(type, "cardbus")) { + dev->hdr_type = PCI_HEADER_TYPE_CARDBUS; + } else { + dev->hdr_type = PCI_HEADER_TYPE_NORMAL; + dev->rom_base_reg = PCI_ROM_ADDRESS; + /* Maybe do a default OF mapping here */ + dev->irq = NO_IRQ; + } + + of_pci_parse_addrs(node, dev); + + pr_debug(" adding to system ...\n"); + + pci_device_add(dev, bus); + + return dev; +} +EXPORT_SYMBOL(of_create_pci_dev); + +/** + * of_scan_pci_bridge - Set up a PCI bridge and scan for child nodes + * @node: device tree node of bridge + * @dev: pci_dev structure for the bridge + * + * of_scan_bus() calls this routine for each PCI bridge that it finds, and + * this routine in turn call of_scan_bus() recusively to scan for more child + * devices. + */ +void __devinit of_scan_pci_bridge(struct device_node *node, + struct pci_dev *dev) +{ + struct pci_bus *bus; + const u32 *busrange, *ranges; + int len, i, mode; + struct resource *res; + unsigned int flags; + u64 size; + + pr_debug("of_scan_pci_bridge(%s)\n", node->full_name); + + /* parse bus-range property */ + busrange = of_get_property(node, "bus-range", &len); + if (busrange == NULL || len != 8) { + printk(KERN_DEBUG "Can't get bus-range for PCI-PCI bridge %s\n", + node->full_name); + return; + } + ranges = of_get_property(node, "ranges", &len); + if (ranges == NULL) { + printk(KERN_DEBUG "Can't get ranges for PCI-PCI bridge %s\n", + node->full_name); + return; + } + + bus = pci_add_new_bus(dev->bus, dev, busrange[0]); + if (!bus) { + printk(KERN_ERR "Failed to create pci bus for %s\n", + node->full_name); + return; + } + + bus->primary = dev->bus->number; + bus->subordinate = busrange[1]; + bus->bridge_ctl = 0; + bus->sysdata = node; + + /* parse ranges property */ + /* PCI #address-cells == 3 and #size-cells == 2 always */ + res = &dev->resource[PCI_BRIDGE_RESOURCES]; + for (i = 0; i < PCI_NUM_RESOURCES - PCI_BRIDGE_RESOURCES; ++i) { + res->flags = 0; + bus->resource[i] = res; + ++res; + } + i = 1; + for (; len >= 32; len -= 32, ranges += 8) { + flags = pci_parse_of_flags(ranges[0], 1); + size = of_read_number(&ranges[6], 2); + if (flags == 0 || size == 0) + continue; + if (flags & IORESOURCE_IO) { + res = bus->resource[0]; + if (res->flags) { + printk(KERN_ERR "PCI: ignoring extra I/O range" + " for bridge %s\n", node->full_name); + continue; + } + } else { + if (i >= PCI_NUM_RESOURCES - PCI_BRIDGE_RESOURCES) { + printk(KERN_ERR "PCI: too many memory ranges" + " for bridge %s\n", node->full_name); + continue; + } + res = bus->resource[i]; + ++i; + } + res->start = of_read_number(&ranges[1], 2); + res->end = res->start + size - 1; + res->flags = flags; + } + sprintf(bus->name, "PCI Bus %04x:%02x", pci_domain_nr(bus), + bus->number); + pr_debug(" bus name: %s\n", bus->name); + + mode = PCI_PROBE_NORMAL; + if (ppc_md.pci_probe_mode) + mode = ppc_md.pci_probe_mode(bus); + pr_debug(" probe mode: %d\n", mode); + + if (mode == PCI_PROBE_DEVTREE) + of_scan_bus(node, bus); + else if (mode == PCI_PROBE_NORMAL) + pci_scan_child_bus(bus); +} +EXPORT_SYMBOL(of_scan_pci_bridge); + +/** + * __of_scan_bus - given a PCI bus node, setup bus and scan for child devices + * @node: device tree node for the PCI bus + * @bus: pci_bus structure for the PCI bus + * @rescan_existing: Flag indicating bus has already been set up + */ +static void __devinit __of_scan_bus(struct device_node *node, + struct pci_bus *bus, int rescan_existing) +{ + struct device_node *child; + const u32 *reg; + int reglen, devfn; + struct pci_dev *dev; + + pr_debug("of_scan_bus(%s) bus no %d... \n", + node->full_name, bus->number); + + /* Scan direct children */ + for_each_child_of_node(node, child) { + pr_debug(" * %s\n", child->full_name); + reg = of_get_property(child, "reg", ®len); + if (reg == NULL || reglen < 20) + continue; + devfn = (reg[0] >> 8) & 0xff; + + /* create a new pci_dev for this device */ + dev = of_create_pci_dev(child, bus, devfn); + if (!dev) + continue; + pr_debug(" dev header type: %x\n", dev->hdr_type); + } + + /* Apply all fixups necessary. We don't fixup the bus "self" + * for an existing bridge that is being rescanned + */ + if (!rescan_existing) + pcibios_setup_bus_self(bus); + pcibios_setup_bus_devices(bus); + + /* Now scan child busses */ + list_for_each_entry(dev, &bus->devices, bus_list) { + if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE || + dev->hdr_type == PCI_HEADER_TYPE_CARDBUS) { + struct device_node *child = pci_device_to_OF_node(dev); + if (dev) + of_scan_pci_bridge(child, dev); + } + } +} + +/** + * of_scan_bus - given a PCI bus node, setup bus and scan for child devices + * @node: device tree node for the PCI bus + * @bus: pci_bus structure for the PCI bus + */ +void __devinit of_scan_bus(struct device_node *node, + struct pci_bus *bus) +{ + __of_scan_bus(node, bus, 0); +} +EXPORT_SYMBOL_GPL(of_scan_bus); + +/** + * of_rescan_bus - given a PCI bus node, scan for child devices + * @node: device tree node for the PCI bus + * @bus: pci_bus structure for the PCI bus + * + * Same as of_scan_bus, but for a pci_bus structure that has already been + * setup. + */ +void __devinit of_rescan_bus(struct device_node *node, + struct pci_bus *bus) +{ + __of_scan_bus(node, bus, 1); +} +EXPORT_SYMBOL_GPL(of_rescan_bus); + -- cgit v1.2.3-70-g09d2 From 89c2dd62a389c5fed07c4b13c906c43214fc7491 Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Tue, 25 Aug 2009 16:20:45 +0000 Subject: powerpc/pci: Pull ppc32 PCI features into common Some of the PCI features we have in ppc32 we will need on ppc64 platforms in the future. These include support for: * ppc_md.pci_exclude_device * indirect config cycles * early config cycles We also simplified the logic in fake_pci_bus() to assume it will always get a valid pci_controller. Since all current callers seem to pass it one. Signed-off-by: Kumar Gala Acked-by: Grant Likely Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/include/asm/machdep.h | 6 +-- arch/powerpc/include/asm/pci-bridge.h | 35 ++++++++--------- arch/powerpc/kernel/pci-common.c | 71 +++++++++++++++++++++++++++++++++++ arch/powerpc/kernel/pci_32.c | 71 ----------------------------------- 4 files changed, 90 insertions(+), 93 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/include/asm/machdep.h b/arch/powerpc/include/asm/machdep.h index 11d1fc3a896..9efa2be7833 100644 --- a/arch/powerpc/include/asm/machdep.h +++ b/arch/powerpc/include/asm/machdep.h @@ -209,14 +209,14 @@ struct machdep_calls { /* * optional PCI "hooks" */ - /* Called in indirect_* to avoid touching devices */ - int (*pci_exclude_device)(struct pci_controller *, unsigned char, unsigned char); - /* Called at then very end of pcibios_init() */ void (*pcibios_after_init)(void); #endif /* CONFIG_PPC32 */ + /* Called in indirect_* to avoid touching devices */ + int (*pci_exclude_device)(struct pci_controller *, unsigned char, unsigned char); + /* Called after PPC generic resource fixup to perform machine specific fixups */ void (*pcibios_fixup_resources)(struct pci_dev *); diff --git a/arch/powerpc/include/asm/pci-bridge.h b/arch/powerpc/include/asm/pci-bridge.h index 3faf575f6b0..76e1f313a58 100644 --- a/arch/powerpc/include/asm/pci-bridge.h +++ b/arch/powerpc/include/asm/pci-bridge.h @@ -77,9 +77,7 @@ struct pci_controller { int first_busno; int last_busno; -#ifndef CONFIG_PPC64 int self_busno; -#endif void __iomem *io_base_virt; #ifdef CONFIG_PPC64 @@ -104,7 +102,6 @@ struct pci_controller { unsigned int __iomem *cfg_addr; void __iomem *cfg_data; -#ifndef CONFIG_PPC64 /* * Used for variants of PCI indirect handling and possible quirks: * SET_CFG_TYPE - used on 4xx or any PHB that does explicit type0/1 @@ -128,7 +125,6 @@ struct pci_controller { #define PPC_INDIRECT_TYPE_BIG_ENDIAN 0x00000010 #define PPC_INDIRECT_TYPE_BROKEN_MRM 0x00000020 u32 indirect_type; -#endif /* !CONFIG_PPC64 */ /* Currently, we limit ourselves to 1 IO range and 3 mem * ranges since the common pci_bus structure can't handle more */ @@ -146,21 +142,6 @@ struct pci_controller { #endif /* CONFIG_PPC64 */ }; -#ifndef CONFIG_PPC64 - -static inline struct pci_controller *pci_bus_to_host(const struct pci_bus *bus) -{ - return bus->sysdata; -} - -static inline int isa_vaddr_is_ioport(void __iomem *address) -{ - /* No specific ISA handling on ppc32 at this stage, it - * all goes through PCI - */ - return 0; -} - /* These are used for config access before all the PCI probing has been done. */ extern int early_read_config_byte(struct pci_controller *hose, int bus, @@ -182,6 +163,22 @@ extern int early_find_capability(struct pci_controller *hose, int bus, extern void setup_indirect_pci(struct pci_controller* hose, resource_size_t cfg_addr, resource_size_t cfg_data, u32 flags); + +#ifndef CONFIG_PPC64 + +static inline struct pci_controller *pci_bus_to_host(const struct pci_bus *bus) +{ + return bus->sysdata; +} + +static inline int isa_vaddr_is_ioport(void __iomem *address) +{ + /* No specific ISA handling on ppc32 at this stage, it + * all goes through PCI + */ + return 0; +} + #else /* CONFIG_PPC64 */ /* diff --git a/arch/powerpc/kernel/pci-common.c b/arch/powerpc/kernel/pci-common.c index 725ea9144e3..8f84a9a8428 100644 --- a/arch/powerpc/kernel/pci-common.c +++ b/arch/powerpc/kernel/pci-common.c @@ -1617,3 +1617,74 @@ void __devinit pcibios_setup_phb_resources(struct pci_controller *hose) (unsigned long)hose->io_base_virt - _IO_BASE); } + +/* + * Null PCI config access functions, for the case when we can't + * find a hose. + */ +#define NULL_PCI_OP(rw, size, type) \ +static int \ +null_##rw##_config_##size(struct pci_dev *dev, int offset, type val) \ +{ \ + return PCIBIOS_DEVICE_NOT_FOUND; \ +} + +static int +null_read_config(struct pci_bus *bus, unsigned int devfn, int offset, + int len, u32 *val) +{ + return PCIBIOS_DEVICE_NOT_FOUND; +} + +static int +null_write_config(struct pci_bus *bus, unsigned int devfn, int offset, + int len, u32 val) +{ + return PCIBIOS_DEVICE_NOT_FOUND; +} + +static struct pci_ops null_pci_ops = +{ + .read = null_read_config, + .write = null_write_config, +}; + +/* + * These functions are used early on before PCI scanning is done + * and all of the pci_dev and pci_bus structures have been created. + */ +static struct pci_bus * +fake_pci_bus(struct pci_controller *hose, int busnr) +{ + static struct pci_bus bus; + + if (hose == 0) { + printk(KERN_ERR "Can't find hose for PCI bus %d!\n", busnr); + } + bus.number = busnr; + bus.sysdata = hose; + bus.ops = hose? hose->ops: &null_pci_ops; + return &bus; +} + +#define EARLY_PCI_OP(rw, size, type) \ +int early_##rw##_config_##size(struct pci_controller *hose, int bus, \ + int devfn, int offset, type value) \ +{ \ + return pci_bus_##rw##_config_##size(fake_pci_bus(hose, bus), \ + devfn, offset, value); \ +} + +EARLY_PCI_OP(read, byte, u8 *) +EARLY_PCI_OP(read, word, u16 *) +EARLY_PCI_OP(read, dword, u32 *) +EARLY_PCI_OP(write, byte, u8) +EARLY_PCI_OP(write, word, u16) +EARLY_PCI_OP(write, dword, u32) + +extern int pci_bus_find_capability (struct pci_bus *bus, unsigned int devfn, int cap); +int early_find_capability(struct pci_controller *hose, int bus, int devfn, + int cap) +{ + return pci_bus_find_capability(fake_pci_bus(hose, bus), devfn, cap); +} diff --git a/arch/powerpc/kernel/pci_32.c b/arch/powerpc/kernel/pci_32.c index 1e807fe7ad2..8cf15d961c3 100644 --- a/arch/powerpc/kernel/pci_32.c +++ b/arch/powerpc/kernel/pci_32.c @@ -469,75 +469,4 @@ long sys_pciconfig_iobase(long which, unsigned long bus, unsigned long devfn) return result; } -/* - * Null PCI config access functions, for the case when we can't - * find a hose. - */ -#define NULL_PCI_OP(rw, size, type) \ -static int \ -null_##rw##_config_##size(struct pci_dev *dev, int offset, type val) \ -{ \ - return PCIBIOS_DEVICE_NOT_FOUND; \ -} - -static int -null_read_config(struct pci_bus *bus, unsigned int devfn, int offset, - int len, u32 *val) -{ - return PCIBIOS_DEVICE_NOT_FOUND; -} - -static int -null_write_config(struct pci_bus *bus, unsigned int devfn, int offset, - int len, u32 val) -{ - return PCIBIOS_DEVICE_NOT_FOUND; -} - -static struct pci_ops null_pci_ops = -{ - .read = null_read_config, - .write = null_write_config, -}; -/* - * These functions are used early on before PCI scanning is done - * and all of the pci_dev and pci_bus structures have been created. - */ -static struct pci_bus * -fake_pci_bus(struct pci_controller *hose, int busnr) -{ - static struct pci_bus bus; - - if (hose == 0) { - hose = pci_bus_to_hose(busnr); - if (hose == 0) - printk(KERN_ERR "Can't find hose for PCI bus %d!\n", busnr); - } - bus.number = busnr; - bus.sysdata = hose; - bus.ops = hose? hose->ops: &null_pci_ops; - return &bus; -} - -#define EARLY_PCI_OP(rw, size, type) \ -int early_##rw##_config_##size(struct pci_controller *hose, int bus, \ - int devfn, int offset, type value) \ -{ \ - return pci_bus_##rw##_config_##size(fake_pci_bus(hose, bus), \ - devfn, offset, value); \ -} - -EARLY_PCI_OP(read, byte, u8 *) -EARLY_PCI_OP(read, word, u16 *) -EARLY_PCI_OP(read, dword, u32 *) -EARLY_PCI_OP(write, byte, u8) -EARLY_PCI_OP(write, word, u16) -EARLY_PCI_OP(write, dword, u32) - -extern int pci_bus_find_capability (struct pci_bus *bus, unsigned int devfn, int cap); -int early_find_capability(struct pci_controller *hose, int bus, int devfn, - int cap) -{ - return pci_bus_find_capability(fake_pci_bus(hose, bus), devfn, cap); -} -- cgit v1.2.3-70-g09d2 From e5a6a1c9094839581242c678b11c93c294108696 Mon Sep 17 00:00:00 2001 From: Paul Gortmaker Date: Thu, 13 Aug 2009 09:37:04 +0000 Subject: powerpc: derive COMMAND_LINE_SIZE from asm-generic The default COMMAND_LINE_SIZE in asm-generic is 512, so the net effect of this change is nil, aside from the cleanup factor. See also commit 2b74b8569. Signed-off-by: Paul Gortmaker Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/include/asm/setup.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/powerpc/include/asm/setup.h b/arch/powerpc/include/asm/setup.h index 817fac0a071..dae19342f0b 100644 --- a/arch/powerpc/include/asm/setup.h +++ b/arch/powerpc/include/asm/setup.h @@ -1,6 +1,6 @@ #ifndef _ASM_POWERPC_SETUP_H #define _ASM_POWERPC_SETUP_H -#define COMMAND_LINE_SIZE 512 +#include #endif /* _ASM_POWERPC_SETUP_H */ -- cgit v1.2.3-70-g09d2 From 77c0a700c1c292edafa11c1e52821ce4636f81b0 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Fri, 28 Aug 2009 14:25:04 +1000 Subject: powerpc: Properly start decrementer on BookE secondary CPUs This moves the code to start the decrementer on 40x and BookE into a separate function which is now called from time_init() and secondary_time_init(), before the respective clock sources are registered. We also remove the 85xx specific code for doing it from the platform code. Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/time.c | 30 ++++++++++++++++++++++-------- arch/powerpc/platforms/85xx/smp.c | 12 ------------ 2 files changed, 22 insertions(+), 20 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/kernel/time.c b/arch/powerpc/kernel/time.c index edb1edb3646..a180b4f9a4f 100644 --- a/arch/powerpc/kernel/time.c +++ b/arch/powerpc/kernel/time.c @@ -727,6 +727,18 @@ static int __init get_freq(char *name, int cells, unsigned long *val) return found; } +/* should become __cpuinit when secondary_cpu_time_init also is */ +void start_cpu_decrementer(void) +{ +#if defined(CONFIG_BOOKE) || defined(CONFIG_40x) + /* Clear any pending timer interrupts */ + mtspr(SPRN_TSR, TSR_ENW | TSR_WIS | TSR_DIS | TSR_FIS); + + /* Enable decrementer interrupt */ + mtspr(SPRN_TCR, TCR_DIE); +#endif /* defined(CONFIG_BOOKE) || defined(CONFIG_40x) */ +} + void __init generic_calibrate_decr(void) { ppc_tb_freq = DEFAULT_TB_FREQ; /* hardcoded default */ @@ -746,14 +758,6 @@ void __init generic_calibrate_decr(void) printk(KERN_ERR "WARNING: Estimating processor frequency " "(not found)\n"); } - -#if defined(CONFIG_BOOKE) || defined(CONFIG_40x) - /* Clear any pending timer interrupts */ - mtspr(SPRN_TSR, TSR_ENW | TSR_WIS | TSR_DIS | TSR_FIS); - - /* Enable decrementer interrupt */ - mtspr(SPRN_TCR, TCR_DIE); -#endif } int update_persistent_clock(struct timespec now) @@ -914,6 +918,11 @@ static void __init init_decrementer_clockevent(void) void secondary_cpu_time_init(void) { + /* Start the decrementer on CPUs that have manual control + * such as BookE + */ + start_cpu_decrementer(); + /* FIME: Should make unrelatred change to move snapshot_timebase * call here ! */ register_decrementer_clockevent(smp_processor_id()); @@ -1017,6 +1026,11 @@ void __init time_init(void) write_sequnlock_irqrestore(&xtime_lock, flags); + /* Start the decrementer on CPUs that have manual control + * such as BookE + */ + start_cpu_decrementer(); + /* Register the clocksource, if we're not running on iSeries */ if (!firmware_has_feature(FW_FEATURE_ISERIES)) clocksource_init(); diff --git a/arch/powerpc/platforms/85xx/smp.c b/arch/powerpc/platforms/85xx/smp.c index 9f526ba31c1..94f901da491 100644 --- a/arch/powerpc/platforms/85xx/smp.c +++ b/arch/powerpc/platforms/85xx/smp.c @@ -78,22 +78,10 @@ smp_85xx_kick_cpu(int nr) pr_debug("waited %d msecs for CPU #%d.\n", n, nr); } -static void __init -smp_85xx_basic_setup(int cpu_nr) -{ - /* Clear any pending timer interrupts */ - mtspr(SPRN_TSR, TSR_ENW | TSR_WIS | TSR_DIS | TSR_FIS); - - /* Enable decrementer interrupt */ - mtspr(SPRN_TCR, TCR_DIE); -} - static void __init smp_85xx_setup_cpu(int cpu_nr) { mpic_setup_this_cpu(); - - smp_85xx_basic_setup(cpu_nr); } struct smp_ops_t smp_85xx_ops = { -- cgit v1.2.3-70-g09d2 From f661be6c8af3ae357e159c3ac6d6aea4aaf7581c Mon Sep 17 00:00:00 2001 From: Stefan Roese Date: Thu, 13 Aug 2009 04:30:44 +0000 Subject: powerpc/44x: Update Arches dts This patch adds some nodes to the AMCC Arches dts: - L2 cache support - NOR FLASH mapping with default partitioning - I2C HWMON device (AD7414) Signed-off-by: Stefan Roese Signed-off-by: Josh Boyer --- arch/powerpc/boot/dts/arches.dts | 50 ++++++++++++++++++++++++++++++++++++++++ 1 file changed, 50 insertions(+) (limited to 'arch') diff --git a/arch/powerpc/boot/dts/arches.dts b/arch/powerpc/boot/dts/arches.dts index d9113b1e8c1..414ef8b7e57 100644 --- a/arch/powerpc/boot/dts/arches.dts +++ b/arch/powerpc/boot/dts/arches.dts @@ -124,6 +124,16 @@ dcr-reg = <0x00c 0x002>; }; + L2C0: l2c { + compatible = "ibm,l2-cache-460gt", "ibm,l2-cache"; + dcr-reg = <0x020 0x008 /* Internal SRAM DCR's */ + 0x030 0x008>; /* L2 cache DCR's */ + cache-line-size = <32>; /* 32 bytes */ + cache-size = <262144>; /* L2, 256K */ + interrupt-parent = <&UIC1>; + interrupts = <11 1>; + }; + plb { compatible = "ibm,plb-460gt", "ibm,plb4"; #address-cells = <2>; @@ -168,6 +178,38 @@ /* ranges property is supplied by U-Boot */ interrupts = <0x6 0x4>; interrupt-parent = <&UIC1>; + + nor_flash@0,0 { + compatible = "amd,s29gl256n", "cfi-flash"; + bank-width = <2>; + reg = <0x00000000 0x00000000 0x02000000>; + #address-cells = <1>; + #size-cells = <1>; + partition@0 { + label = "kernel"; + reg = <0x00000000 0x001e0000>; + }; + partition@1e0000 { + label = "dtb"; + reg = <0x001e0000 0x00020000>; + }; + partition@200000 { + label = "root"; + reg = <0x00200000 0x00200000>; + }; + partition@400000 { + label = "user"; + reg = <0x00400000 0x01b60000>; + }; + partition@1f60000 { + label = "env"; + reg = <0x01f60000 0x00040000>; + }; + partition@1fa0000 { + label = "u-boot"; + reg = <0x01fa0000 0x00060000>; + }; + }; }; UART0: serial@ef600300 { @@ -186,6 +228,14 @@ reg = <0xef600700 0x00000014>; interrupt-parent = <&UIC0>; interrupts = <0x2 0x4>; + #address-cells = <1>; + #size-cells = <0>; + sttm@4a { + compatible = "ad,ad7414"; + reg = <0x4a>; + interrupt-parent = <&UIC1>; + interrupts = <0x0 0x8>; + }; }; IIC1: i2c@ef600800 { -- cgit v1.2.3-70-g09d2 From 241749261377f2e10d513505a75c071c0f4b3b51 Mon Sep 17 00:00:00 2001 From: Stefan Roese Date: Thu, 13 Aug 2009 04:30:56 +0000 Subject: powerpc/44x: Update Arches defconfig This patch adds NOR MTD support and I2C HWMON support for the AD7414 to the AMCC Arches defconfig. Signed-off-by: Stefan Roese Signed-off-by: Josh Boyer --- arch/powerpc/configs/44x/arches_defconfig | 382 ++++++++++++++++++++++++++---- 1 file changed, 332 insertions(+), 50 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/configs/44x/arches_defconfig b/arch/powerpc/configs/44x/arches_defconfig index f7fd32c0942..6f976b51cdd 100644 --- a/arch/powerpc/configs/44x/arches_defconfig +++ b/arch/powerpc/configs/44x/arches_defconfig @@ -1,14 +1,14 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc2 -# Tue Jan 20 08:22:31 2009 +# Linux kernel version: 2.6.31-rc5 +# Thu Aug 13 14:14:07 2009 # # CONFIG_PPC64 is not set # # Processor support # -# CONFIG_6xx is not set +# CONFIG_PPC_BOOK3S_32 is not set # CONFIG_PPC_85xx is not set # CONFIG_PPC_8xx is not set # CONFIG_40x is not set @@ -31,15 +31,16 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_FIND_NEXT_BIT=y # CONFIG_ARCH_NO_VIRT_TO_BUS is not set CONFIG_PPC=y @@ -53,11 +54,14 @@ CONFIG_PPC_UDBG_16550=y # CONFIG_GENERIC_TBSYNC is not set CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y +CONFIG_DTC=y # CONFIG_DEFAULT_UIMAGE is not set CONFIG_PPC_DCR_NATIVE=y # CONFIG_PPC_DCR_MMIO is not set CONFIG_PPC_DCR=y +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -71,9 +75,19 @@ CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 # CONFIG_GROUP_SCHED is not set @@ -84,8 +98,12 @@ CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y @@ -95,23 +113,30 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y +CONFIG_HAVE_PERF_COUNTERS=y + +# +# Performance Counters +# +# CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y +# CONFIG_STRIP_ASM_SYMS is not set +CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y @@ -119,6 +144,12 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y + +# +# GCOV-based kernel profiling +# +# CONFIG_GCOV_KERNEL is not set +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -130,8 +161,7 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y -CONFIG_LBD=y -# CONFIG_BLK_DEV_IO_TRACE is not set +CONFIG_LBDAF=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -147,11 +177,6 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set -# CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set CONFIG_PPC4xx_PCI_EXPRESS=y @@ -172,6 +197,7 @@ CONFIG_PPC4xx_PCI_EXPRESS=y CONFIG_ARCHES=y # CONFIG_CANYONLANDS is not set # CONFIG_GLACIER is not set +# CONFIG_REDWOOD is not set # CONFIG_YOSEMITE is not set # CONFIG_XILINX_VIRTEX440_GENERIC_BOARD is not set CONFIG_PPC44x_SIMPLE=y @@ -214,6 +240,7 @@ CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set # CONFIG_MATH_EMULATION is not set # CONFIG_IOMMU_HELPER is not set +# CONFIG_SWIOTLB is not set CONFIG_PPC_NEED_DMA_SYNC_OPS=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y @@ -233,10 +260,14 @@ CONFIG_PHYS_ADDR_T_64BIT=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 +CONFIG_STDBINUTILS=y CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set +# CONFIG_PPC_256K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y CONFIG_CMDLINE_BOOL=y @@ -261,6 +292,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_LEGACY is not set # CONFIG_PCI_DEBUG is not set # CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -278,14 +310,12 @@ CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0xc0000000 -CONFIG_CONSISTENT_START=0xff100000 CONFIG_CONSISTENT_SIZE=0x00200000 CONFIG_NET=y # # Networking options # -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -335,6 +365,8 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -347,7 +379,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set # CONFIG_WIRELESS is not set # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set @@ -371,8 +402,92 @@ CONFIG_EXTRA_FIRMWARE="" # CONFIG_SYS_HYPERVISOR is not set CONFIG_CONNECTOR=y CONFIG_PROC_EVENTS=y -# CONFIG_MTD is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_TESTS is not set +# CONFIG_MTD_REDBOOT_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y +CONFIG_MTD_OF_PARTS=y +# CONFIG_MTD_AR7_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_CFI_INTELEXT is not set +CONFIG_MTD_CFI_AMDSTD=y +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +# CONFIG_MTD_PHYSMAP is not set +CONFIG_MTD_PHYSMAP_OF=y +# CONFIG_MTD_INTEL_VR_NOR is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_PMC551 is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +# CONFIG_MTD_NAND is not set +# CONFIG_MTD_ONENAND is not set + +# +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set CONFIG_OF_DEVICE=y +CONFIG_OF_I2C=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set @@ -412,7 +527,11 @@ CONFIG_HAVE_IDE=y # # -# Enable only one of the two stacks, unless you know what you are doing +# You can enable one or both FireWire driver stacks. +# + +# +# See the help texts for more information. # # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set @@ -433,6 +552,8 @@ CONFIG_NET_ETHERNET=y # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set CONFIG_IBM_NEW_EMAC=y @@ -451,6 +572,7 @@ CONFIG_IBM_NEW_EMAC_EMAC4=y # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_NET_PCI is not set # CONFIG_B44 is not set +# CONFIG_KS8842 is not set # CONFIG_ATL2 is not set # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set @@ -461,7 +583,6 @@ CONFIG_IBM_NEW_EMAC_EMAC4=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -533,13 +654,143 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_RAW_DRIVER is not set # CONFIG_TCG_TPM is not set CONFIG_DEVPORT=y -# CONFIG_I2C is not set +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_CHARDEV=y +CONFIG_I2C_HELPER_AUTO=y + +# +# I2C Hardware Bus support +# + +# +# PC SMBus host controller drivers +# +# CONFIG_I2C_ALI1535 is not set +# CONFIG_I2C_ALI1563 is not set +# CONFIG_I2C_ALI15X3 is not set +# CONFIG_I2C_AMD756 is not set +# CONFIG_I2C_AMD8111 is not set +# CONFIG_I2C_I801 is not set +# CONFIG_I2C_ISCH is not set +# CONFIG_I2C_PIIX4 is not set +# CONFIG_I2C_NFORCE2 is not set +# CONFIG_I2C_SIS5595 is not set +# CONFIG_I2C_SIS630 is not set +# CONFIG_I2C_SIS96X is not set +# CONFIG_I2C_VIA is not set +# CONFIG_I2C_VIAPRO is not set + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +CONFIG_I2C_IBM_IIC=y +# CONFIG_I2C_MPC is not set +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set + +# +# Graphics adapter I2C/DDC channel drivers +# +# CONFIG_I2C_VOODOO3 is not set + +# +# Other I2C/SMBus bus drivers +# +# CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_STUB is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_DS1682 is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_PCF8575 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set + +# +# PPS support +# +# CONFIG_PPS is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_GPIOLIB is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set -# CONFIG_HWMON is not set +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +CONFIG_SENSORS_AD7414=y +# CONFIG_SENSORS_AD7418 is not set +# CONFIG_SENSORS_ADM1021 is not set +# CONFIG_SENSORS_ADM1025 is not set +# CONFIG_SENSORS_ADM1026 is not set +# CONFIG_SENSORS_ADM1029 is not set +# CONFIG_SENSORS_ADM1031 is not set +# CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ADT7462 is not set +# CONFIG_SENSORS_ADT7470 is not set +# CONFIG_SENSORS_ADT7473 is not set +# CONFIG_SENSORS_ADT7475 is not set +# CONFIG_SENSORS_ATXP1 is not set +# CONFIG_SENSORS_DS1621 is not set +# CONFIG_SENSORS_I5K_AMB is not set +# CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_F71882FG is not set +# CONFIG_SENSORS_F75375S is not set +# CONFIG_SENSORS_G760A is not set +# CONFIG_SENSORS_GL518SM is not set +# CONFIG_SENSORS_GL520SM is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_LM63 is not set +# CONFIG_SENSORS_LM75 is not set +# CONFIG_SENSORS_LM77 is not set +# CONFIG_SENSORS_LM78 is not set +# CONFIG_SENSORS_LM80 is not set +# CONFIG_SENSORS_LM83 is not set +# CONFIG_SENSORS_LM85 is not set +# CONFIG_SENSORS_LM87 is not set +# CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set +# CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_LTC4215 is not set +# CONFIG_SENSORS_LTC4245 is not set +# CONFIG_SENSORS_LM95241 is not set +# CONFIG_SENSORS_MAX1619 is not set +# CONFIG_SENSORS_MAX6650 is not set +# CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_SIS5595 is not set +# CONFIG_SENSORS_DME1737 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47M192 is not set +# CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_ADS7828 is not set +# CONFIG_SENSORS_THMC50 is not set +# CONFIG_SENSORS_TMP401 is not set +# CONFIG_SENSORS_VIA686A is not set +# CONFIG_SENSORS_VT1211 is not set +# CONFIG_SENSORS_VT8231 is not set +# CONFIG_SENSORS_W83781D is not set +# CONFIG_SENSORS_W83791D is not set +# CONFIG_SENSORS_W83792D is not set +# CONFIG_SENSORS_W83793 is not set +# CONFIG_SENSORS_W83L785TS is not set +# CONFIG_SENSORS_W83L786NG is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set +# CONFIG_HWMON_DEBUG_CHIP is not set # CONFIG_THERMAL is not set # CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set @@ -556,24 +807,15 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_PCF50633 is not set +# CONFIG_AB3100_CORE is not set # CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -CONFIG_DAB=y +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support @@ -600,7 +842,12 @@ CONFIG_VIDEO_OUTPUT_CONTROL=m # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -614,11 +861,12 @@ CONFIG_EXT2_FS=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -627,6 +875,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -660,6 +913,17 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set +# CONFIG_JFFS2_SUMMARY is not set +# CONFIG_JFFS2_FS_XATTR is not set +# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set +CONFIG_JFFS2_ZLIB=y +# CONFIG_JFFS2_LZO is not set +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set CONFIG_CRAMFS=y # CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set @@ -670,6 +934,7 @@ CONFIG_CRAMFS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -681,7 +946,6 @@ CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_REGISTER_V4 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -697,6 +961,7 @@ CONFIG_SUNRPC=y CONFIG_MSDOS_PARTITION=y # CONFIG_NLS is not set # CONFIG_DLM is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines @@ -711,11 +976,14 @@ CONFIG_CRC32=y # CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y -CONFIG_PLIST=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_DECOMPRESS_GZIP=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y +CONFIG_GENERIC_ATOMIC64=y # # Kernel hacking @@ -733,6 +1001,9 @@ CONFIG_DEBUG_KERNEL=y CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set @@ -743,6 +1014,9 @@ CONFIG_SCHED_DEBUG=y # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set @@ -754,7 +1028,6 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set -# CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set @@ -762,27 +1035,36 @@ CONFIG_SCHED_DEBUG=y # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y +# CONFIG_DEBUG_PAGEALLOC is not set CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y - -# -# Tracers -# +CONFIG_TRACING_SUPPORT=y +CONFIG_FTRACE=y # CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set # CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_ENABLE_DEFAULT_TRACERS is not set # CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set +CONFIG_BRANCH_PROFILE_NONE=y +# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set +# CONFIG_PROFILE_ALL_BRANCHES is not set # CONFIG_STACK_TRACER is not set -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_DYNAMIC_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set +# CONFIG_KMEMCHECK is not set +# CONFIG_PPC_DISABLE_WERROR is not set +CONFIG_PPC_WERROR=y CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set -# CONFIG_DEBUG_PAGEALLOC is not set +# CONFIG_PPC_EMULATED_STATS is not set # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set # CONFIG_MSI_BITMAP_SELFTEST is not set -- cgit v1.2.3-70-g09d2 From c9f75093a497bdc7389df983e914da17fad20d95 Mon Sep 17 00:00:00 2001 From: "fkan@amcc.com" Date: Wed, 12 Aug 2009 14:38:47 +0000 Subject: powerpc/44x: Add Eiger AMCC (AppliedMicro) PPC460SX evaluation board support. This patch adds support for the AMCC (AppliedMicro) PPC460SX Eiger evaluation board. Signed-off-by: Tai Tri Nguyen Acked-by: Feng Kan Acked-by: Tirumala Marri Signed-off-by: Josh Boyer --- arch/powerpc/boot/dts/eiger.dts | 421 ++++++++++ arch/powerpc/configs/44x/eiger_defconfig | 1252 ++++++++++++++++++++++++++++ arch/powerpc/platforms/44x/Kconfig | 12 + arch/powerpc/platforms/44x/ppc44x_simple.c | 1 + 4 files changed, 1686 insertions(+) create mode 100644 arch/powerpc/boot/dts/eiger.dts create mode 100644 arch/powerpc/configs/44x/eiger_defconfig (limited to 'arch') diff --git a/arch/powerpc/boot/dts/eiger.dts b/arch/powerpc/boot/dts/eiger.dts new file mode 100644 index 00000000000..c4a934f2e88 --- /dev/null +++ b/arch/powerpc/boot/dts/eiger.dts @@ -0,0 +1,421 @@ +/* + * Device Tree Source for AMCC (AppliedMicro) Eiger(460SX) + * + * Copyright 2009 AMCC (AppliedMicro) + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without + * any warranty of any kind, whether express or implied. + */ + +/dts-v1/; + +/ { + #address-cells = <2>; + #size-cells = <1>; + model = "amcc,eiger"; + compatible = "amcc,eiger"; + dcr-parent = <&{/cpus/cpu@0}>; + + aliases { + ethernet0 = &EMAC0; + ethernet1 = &EMAC1; + ethernet2 = &EMAC2; + ethernet3 = &EMAC3; + serial0 = &UART0; + serial1 = &UART1; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + model = "PowerPC,460SX"; + reg = <0x00000000>; + clock-frequency = <0>; /* Filled in by U-Boot */ + timebase-frequency = <0>; /* Filled in by U-Boot */ + i-cache-line-size = <32>; + d-cache-line-size = <32>; + i-cache-size = <32768>; + d-cache-size = <32768>; + dcr-controller; + dcr-access-method = "native"; + }; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x00000000 0x00000000>; /* Filled in by U-Boot */ + }; + + UIC0: interrupt-controller0 { + compatible = "ibm,uic-460sx","ibm,uic"; + interrupt-controller; + cell-index = <0>; + dcr-reg = <0x0c0 0x009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + }; + + UIC1: interrupt-controller1 { + compatible = "ibm,uic-460sx","ibm,uic"; + interrupt-controller; + cell-index = <1>; + dcr-reg = <0x0d0 0x009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */ + interrupt-parent = <&UIC0>; + }; + + UIC2: interrupt-controller2 { + compatible = "ibm,uic-460sx","ibm,uic"; + interrupt-controller; + cell-index = <2>; + dcr-reg = <0x0e0 0x009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + interrupts = <0xa 0x4 0xb 0x4>; /* cascade */ + interrupt-parent = <&UIC0>; + }; + + UIC3: interrupt-controller3 { + compatible = "ibm,uic-460sx","ibm,uic"; + interrupt-controller; + cell-index = <3>; + dcr-reg = <0x0f0 0x009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + interrupts = <0x10 0x4 0x11 0x4>; /* cascade */ + interrupt-parent = <&UIC0>; + }; + + SDR0: sdr { + compatible = "ibm,sdr-460sx"; + dcr-reg = <0x00e 0x002>; + }; + + CPR0: cpr { + compatible = "ibm,cpr-460sx"; + dcr-reg = <0x00c 0x002>; + }; + + plb { + compatible = "ibm,plb-460sx", "ibm,plb4"; + #address-cells = <2>; + #size-cells = <1>; + ranges; + clock-frequency = <0>; /* Filled in by U-Boot */ + + SDRAM0: sdram { + compatible = "ibm,sdram-460sx", "ibm,sdram-405gp"; + dcr-reg = <0x010 0x002>; + }; + + MAL0: mcmal { + compatible = "ibm,mcmal-460sx", "ibm,mcmal2"; + dcr-reg = <0x180 0x62>; + num-tx-chans = <4>; + num-rx-chans = <32>; + #address-cells = <1>; + #size-cells = <1>; + interrupt-parent = <&UIC1>; + interrupts = < /*TXEOB*/ 0x6 0x4 + /*RXEOB*/ 0x7 0x4 + /*SERR*/ 0x1 0x4 + /*TXDE*/ 0x2 0x4 + /*RXDE*/ 0x3 0x4 + /*COAL TX0*/ 0x18 0x2 + /*COAL TX1*/ 0x19 0x2 + /*COAL TX2*/ 0x1a 0x2 + /*COAL TX3*/ 0x1b 0x2 + /*COAL RX0*/ 0x1c 0x2 + /*COAL RX1*/ 0x1d 0x2 + /*COAL RX2*/ 0x1e 0x2 + /*COAL RX3*/ 0x1f 0x2>; + }; + + POB0: opb { + compatible = "ibm,opb-460sx", "ibm,opb"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0xb0000000 0x00000004 0xb0000000 0x50000000>; + clock-frequency = <0>; /* Filled in by U-Boot */ + + EBC0: ebc { + compatible = "ibm,ebc-460sx", "ibm,ebc"; + dcr-reg = <0x012 0x002>; + #address-cells = <2>; + #size-cells = <1>; + clock-frequency = <0>; /* Filled in by U-Boot */ + /* ranges property is supplied by U-Boot */ + interrupts = <0x6 0x4>; + interrupt-parent = <&UIC1>; + + nor_flash@0,0 { + compatible = "amd,s29gl512n", "cfi-flash"; + bank-width = <2>; + /* reg property is supplied in by U-Boot */ + #address-cells = <1>; + #size-cells = <1>; + partition@0 { + label = "kernel"; + reg = <0x00000000 0x001e0000>; + }; + partition@1e0000 { + label = "dtb"; + reg = <0x001e0000 0x00020000>; + }; + partition@200000 { + label = "ramdisk"; + reg = <0x00200000 0x01400000>; + }; + partition@1600000 { + label = "jffs2"; + reg = <0x01600000 0x00400000>; + }; + partition@1a00000 { + label = "user"; + reg = <0x01a00000 0x02560000>; + }; + partition@3f60000 { + label = "env"; + reg = <0x03f60000 0x00040000>; + }; + partition@3fa0000 { + label = "u-boot"; + reg = <0x03fa0000 0x00060000>; + }; + }; + + ndfc@1,0 { + compatible = "ibm,ndfc"; + /* reg property is supplied by U-boot */ + ccr = <0x00003000>; + bank-settings = <0x80002222>; + #address-cells = <1>; + #size-cells = <1>; + + nand { + #address-cells = <1>; + #size-cells = <1>; + partition@0 { + label = "uboot"; + reg = <0x00000000 0x00200000>; + }; + partition@200000 { + label = "uboot-environment"; + reg = <0x00200000 0x00100000>; + }; + partition@300000 { + label = "linux"; + reg = <0x00300000 0x00300000>; + }; + partition@600000 { + label = "root-file-system"; + reg = <0x00600000 0x01900000>; + }; + partition@1f00000 { + label = "device-tree"; + reg = <0x01f00000 0x00020000>; + }; + partition@1f20000 { + label = "data"; + reg = <0x01f20000 0x060E0000>; + }; + }; + }; + }; + + UART0: serial@ef600200 { + device_type = "serial"; + compatible = "ns16550"; + reg = <0xef600200 0x00000008>; + virtual-reg = <0xef600200>; + clock-frequency = <0>; /* Filled in by U-Boot */ + current-speed = <0>; /* Filled in by U-Boot */ + interrupt-parent = <&UIC0>; + interrupts = <0x0 0x4>; + }; + + UART1: serial@ef600300 { + device_type = "serial"; + compatible = "ns16550"; + reg = <0xef600300 0x00000008>; + virtual-reg = <0xef600300>; + clock-frequency = <0>; /* Filled in by U-Boot */ + current-speed = <0>; /* Filled in by U-Boot */ + interrupt-parent = <&UIC0>; + interrupts = <0x1 0x4>; + }; + + IIC0: i2c@ef600400 { + compatible = "ibm,iic-460sx", "ibm,iic"; + reg = <0xef600400 0x00000014>; + interrupt-parent = <&UIC0>; + interrupts = <0x2 0x4>; + #address-cells = <1>; + #size-cells = <0>; + index = <0>; + }; + + IIC1: i2c@ef600500 { + compatible = "ibm,iic-460sx", "ibm,iic"; + reg = <0xef600500 0x00000014>; + interrupt-parent = <&UIC0>; + interrupts = <0x3 0x4>; + #address-cells = <1>; + #size-cells = <0>; + index = <1>; + }; + + RGMII0: emac-rgmii@ef600900 { + compatible = "ibm,rgmii-460sx", "ibm,rgmii"; + reg = <0xef600900 0x00000008>; + has-mdio; + }; + + RGMII1: emac-rgmii@ef600920 { + compatible = "ibm,rgmii-460sx", "ibm,rgmii"; + reg = <0xef600920 0x00000008>; + has-mdio; + }; + + TAH0: emac-tah@ef600e50 { + compatible = "ibm,tah-460sx", "ibm,tah"; + reg = <0xef600e50 0x00000030>; + }; + + TAH1: emac-tah@ef600f50 { + compatible = "ibm,tah-460sx", "ibm,tah"; + reg = <0xef600f50 0x00000030>; + }; + + EMAC0: ethernet@ef600a00 { + device_type = "network"; + compatible = "ibm,emac-460sx", "ibm,emac4"; + interrupt-parent = <&EMAC0>; + interrupts = <0x0 0x1>; + #interrupt-cells = <1>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = ; + reg = <0xef600a00 0x00000070>; + local-mac-address = [000000000000]; /* Filled in by U-Boot */ + mal-device = <&MAL0>; + mal-tx-channel = <0>; + mal-rx-channel = <0>; + cell-index = <0>; + max-frame-size = <9000>; + rx-fifo-size = <4096>; + tx-fifo-size = <2048>; + phy-mode = "rgmii"; + phy-map = <0x00000000>; + rgmii-device = <&RGMII0>; + rgmii-channel = <0>; + tah-device = <&TAH0>; + tah-channel = <0>; + has-inverted-stacr-oc; + has-new-stacr-staopc; + }; + + EMAC1: ethernet@ef600b00 { + device_type = "network"; + compatible = "ibm,emac-460sx", "ibm,emac4"; + interrupt-parent = <&EMAC1>; + interrupts = <0x0 0x1>; + #interrupt-cells = <1>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = ; + reg = <0xef600b00 0x00000070>; + local-mac-address = [000000000000]; /* Filled in by U-Boot */ + mal-device = <&MAL0>; + mal-tx-channel = <1>; + mal-rx-channel = <8>; + cell-index = <1>; + max-frame-size = <9000>; + rx-fifo-size = <4096>; + tx-fifo-size = <2048>; + phy-mode = "rgmii"; + phy-map = <0x00000000>; + rgmii-device = <&RGMII0>; + rgmii-channel = <1>; + tah-device = <&TAH1>; + tah-channel = <1>; + has-inverted-stacr-oc; + has-new-stacr-staopc; + mdio-device = <&EMAC0>; + }; + + EMAC2: ethernet@ef600c00 { + device_type = "network"; + compatible = "ibm,emac-460sx", "ibm,emac4"; + interrupt-parent = <&EMAC2>; + interrupts = <0x0 0x1>; + #interrupt-cells = <1>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = ; + reg = <0xef600c00 0x00000070>; + local-mac-address = [000000000000]; /* Filled in by U-Boot */ + mal-device = <&MAL0>; + mal-tx-channel = <2>; + mal-rx-channel = <16>; + cell-index = <2>; + max-frame-size = <9000>; + rx-fifo-size = <4096>; + tx-fifo-size = <2048>; + phy-mode = "rgmii"; + phy-map = <0x00000000>; + rgmii-device = <&RGMII1>; + rgmii-channel = <0>; + has-inverted-stacr-oc; + has-new-stacr-staopc; + mdio-device = <&EMAC0>; + }; + + EMAC3: ethernet@ef600d00 { + device_type = "network"; + compatible = "ibm,emac-460sx", "ibm,emac4"; + interrupt-parent = <&EMAC3>; + interrupts = <0x0 0x1>; + #interrupt-cells = <1>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = ; + reg = <0xef600d00 0x00000070>; + local-mac-address = [000000000000]; /* Filled in by U-Boot */ + mal-device = <&MAL0>; + mal-tx-channel = <3>; + mal-rx-channel = <24>; + cell-index = <3>; + max-frame-size = <9000>; + rx-fifo-size = <4096>; + tx-fifo-size = <2048>; + phy-mode = "rgmii"; + phy-map = <0x00000000>; + rgmii-device = <&RGMII1>; + rgmii-channel = <1>; + has-inverted-stacr-oc; + has-new-stacr-staopc; + mdio-device = <&EMAC0>; + }; + }; + + }; + chosen { + linux,stdout-path = "/plb/opb/serial@ef600200"; + }; + +}; diff --git a/arch/powerpc/configs/44x/eiger_defconfig b/arch/powerpc/configs/44x/eiger_defconfig new file mode 100644 index 00000000000..007f3bd939e --- /dev/null +++ b/arch/powerpc/configs/44x/eiger_defconfig @@ -0,0 +1,1252 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.31-rc6 +# Wed Aug 19 13:06:50 2009 +# +# CONFIG_PPC64 is not set + +# +# Processor support +# +# CONFIG_PPC_BOOK3S_32 is not set +# CONFIG_PPC_85xx is not set +# CONFIG_PPC_8xx is not set +# CONFIG_40x is not set +CONFIG_44x=y +# CONFIG_E200 is not set +CONFIG_PPC_FPU=y +CONFIG_4xx=y +CONFIG_BOOKE=y +CONFIG_PTE_64BIT=y +CONFIG_PHYS_64BIT=y +CONFIG_PPC_MMU_NOHASH=y +CONFIG_PPC_MMU_NOHASH_32=y +# CONFIG_PPC_MM_SLICES is not set +CONFIG_NOT_COHERENT_CACHE=y +CONFIG_PPC32=y +CONFIG_WORD_SIZE=32 +CONFIG_ARCH_PHYS_ADDR_T_64BIT=y +CONFIG_MMU=y +CONFIG_GENERIC_CMOS_UPDATE=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_TIME_VSYSCALL=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +CONFIG_IRQ_PER_CPU=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_RWSEM_XCHGADD_ALGORITHM=y +CONFIG_ARCH_HAS_ILOG2_U32=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +# CONFIG_ARCH_NO_VIRT_TO_BUS is not set +CONFIG_PPC=y +CONFIG_EARLY_PRINTK=y +CONFIG_GENERIC_NVRAM=y +CONFIG_SCHED_OMIT_FRAME_POINTER=y +CONFIG_ARCH_MAY_HAVE_PC_FDC=y +CONFIG_PPC_OF=y +CONFIG_OF=y +CONFIG_PPC_UDBG_16550=y +# CONFIG_GENERIC_TBSYNC is not set +CONFIG_AUDIT_ARCH=y +CONFIG_GENERIC_BUG=y +CONFIG_DTC=y +# CONFIG_DEFAULT_UIMAGE is not set +CONFIG_PPC_DCR_NATIVE=y +# CONFIG_PPC_DCR_MMIO is not set +CONFIG_PPC_DCR=y +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y +# CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y +CONFIG_EMBEDDED=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_AIO=y +CONFIG_HAVE_PERF_COUNTERS=y + +# +# Performance Counters +# +# CONFIG_PERF_COUNTERS is not set +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_PCI_QUIRKS=y +CONFIG_SLUB_DEBUG=y +# CONFIG_STRIP_ASM_SYMS is not set +CONFIG_COMPAT_BRK=y +# CONFIG_SLAB is not set +CONFIG_SLUB=y +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y +CONFIG_HAVE_IOREMAP_PROT=y +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_ARCH_TRACEHOOK=y + +# +# GCOV-based kernel profiling +# +# CONFIG_GCOV_KERNEL is not set +# CONFIG_SLOW_WORK is not set +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_BLOCK=y +CONFIG_LBDAF=y +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" +# CONFIG_FREEZER is not set +CONFIG_PPC4xx_PCI_EXPRESS=y + +# +# Platform support +# +# CONFIG_PPC_CELL is not set +# CONFIG_PPC_CELL_NATIVE is not set +# CONFIG_PQ2ADS is not set +# CONFIG_BAMBOO is not set +# CONFIG_EBONY is not set +# CONFIG_SAM440EP is not set +# CONFIG_SEQUOIA is not set +# CONFIG_TAISHAN is not set +# CONFIG_KATMAI is not set +# CONFIG_RAINIER is not set +# CONFIG_WARP is not set +# CONFIG_ARCHES is not set +# CONFIG_CANYONLANDS is not set +# CONFIG_GLACIER is not set +# CONFIG_REDWOOD is not set +CONFIG_EIGER=y +# CONFIG_YOSEMITE is not set +# CONFIG_XILINX_VIRTEX440_GENERIC_BOARD is not set +CONFIG_PPC44x_SIMPLE=y +# CONFIG_PPC4xx_GPIO is not set +CONFIG_460SX=y +# CONFIG_IPIC is not set +# CONFIG_MPIC is not set +# CONFIG_MPIC_WEIRD is not set +# CONFIG_PPC_I8259 is not set +# CONFIG_PPC_RTAS is not set +# CONFIG_MMIO_NVRAM is not set +# CONFIG_PPC_MPC106 is not set +# CONFIG_PPC_970_NAP is not set +# CONFIG_PPC_INDIRECT_IO is not set +# CONFIG_GENERIC_IOMAP is not set +# CONFIG_CPU_FREQ is not set +# CONFIG_FSL_ULI1575 is not set +# CONFIG_SIMPLE_GPIO is not set + +# +# Kernel options +# +# CONFIG_HIGHMEM is not set +CONFIG_TICK_ONESHOT=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_300 is not set +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +CONFIG_SCHED_HRTICK=y +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set +# CONFIG_BINFMT_MISC is not set +# CONFIG_MATH_EMULATION is not set +# CONFIG_IOMMU_HELPER is not set +# CONFIG_SWIOTLB is not set +CONFIG_PPC_NEED_DMA_SYNC_OPS=y +CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y +CONFIG_ARCH_HAS_WALK_MEMORY=y +CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_POPULATES_NODE_MAP=y +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_MIGRATION=y +CONFIG_PHYS_ADDR_T_64BIT=y +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 +CONFIG_STDBINUTILS=y +CONFIG_PPC_4K_PAGES=y +# CONFIG_PPC_16K_PAGES is not set +# CONFIG_PPC_64K_PAGES is not set +# CONFIG_PPC_256K_PAGES is not set +CONFIG_FORCE_MAX_ZONEORDER=11 +CONFIG_PROC_DEVICETREE=y +CONFIG_CMDLINE_BOOL=y +CONFIG_CMDLINE="" +CONFIG_EXTRA_TARGETS="" +CONFIG_SECCOMP=y +CONFIG_ISA_DMA_API=y + +# +# Bus options +# +CONFIG_ZONE_DMA=y +CONFIG_PPC_INDIRECT_PCI=y +CONFIG_4xx_SOC=y +CONFIG_PPC_PCI_CHOICE=y +CONFIG_PCI=y +CONFIG_PCI_DOMAINS=y +CONFIG_PCI_SYSCALL=y +CONFIG_PCIEPORTBUS=y +CONFIG_PCIEAER=y +# CONFIG_PCIE_ECRC is not set +# CONFIG_PCIEAER_INJECT is not set +# CONFIG_PCIEASPM is not set +CONFIG_ARCH_SUPPORTS_MSI=y +# CONFIG_PCI_MSI is not set +CONFIG_PCI_LEGACY=y +# CONFIG_PCI_DEBUG is not set +# CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set +# CONFIG_PCCARD is not set +# CONFIG_HOTPLUG_PCI is not set +# CONFIG_HAS_RAPIDIO is not set + +# +# Advanced setup +# +# CONFIG_ADVANCED_OPTIONS is not set + +# +# Default settings for advanced configuration options are used +# +CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_PAGE_OFFSET=0xc0000000 +CONFIG_KERNEL_START=0xc0000000 +CONFIG_PHYSICAL_START=0x00000000 +CONFIG_TASK_SIZE=0xc0000000 +CONFIG_CONSISTENT_SIZE=0x00200000 +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_LRO is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set +# CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set +CONFIG_WIRELESS=y +# CONFIG_CFG80211 is not set +CONFIG_WIRELESS_OLD_REGULATORY=y +# CONFIG_WIRELESS_EXT is not set +# CONFIG_LIB80211 is not set + +# +# CFG80211 needs to be enabled for MAC80211 +# +CONFIG_MAC80211_DEFAULT_PS_VALUE=0 +# CONFIG_WIMAX is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +CONFIG_CONNECTOR=y +CONFIG_PROC_EVENTS=y +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +CONFIG_MTD_CONCAT=y +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_TESTS is not set +# CONFIG_MTD_REDBOOT_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y +CONFIG_MTD_OF_PARTS=y +# CONFIG_MTD_AR7_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_CFI_INTELEXT is not set +CONFIG_MTD_CFI_AMDSTD=y +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +# CONFIG_MTD_PHYSMAP is not set +CONFIG_MTD_PHYSMAP_OF=y +# CONFIG_MTD_INTEL_VR_NOR is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_PMC551 is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +CONFIG_MTD_NAND=y +# CONFIG_MTD_NAND_VERIFY_WRITE is not set +CONFIG_MTD_NAND_ECC_SMC=y +# CONFIG_MTD_NAND_MUSEUM_IDS is not set +CONFIG_MTD_NAND_IDS=y +CONFIG_MTD_NAND_NDFC=y +# CONFIG_MTD_NAND_DISKONCHIP is not set +# CONFIG_MTD_NAND_CAFE is not set +# CONFIG_MTD_NAND_NANDSIM is not set +# CONFIG_MTD_NAND_PLATFORM is not set +# CONFIG_MTD_NAND_FSL_ELBC is not set +# CONFIG_MTD_ONENAND is not set + +# +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +CONFIG_OF_DEVICE=y +CONFIG_OF_I2C=y +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_FD is not set +# CONFIG_BLK_CPQ_DA is not set +# CONFIG_BLK_CPQ_CISS_DA is not set +# CONFIG_BLK_DEV_DAC960 is not set +# CONFIG_BLK_DEV_UMEM is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +# CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_SX8 is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=35000 +# CONFIG_BLK_DEV_XIP is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +# CONFIG_XILINX_SYSACE is not set +# CONFIG_BLK_DEV_HD is not set +# CONFIG_MISC_DEVICES is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +CONFIG_CHR_DEV_SG=y +# CONFIG_CHR_DEV_SCH is not set +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +CONFIG_SCSI_SAS_ATTRS=y +# CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set +CONFIG_SCSI_LOWLEVEL=y +# CONFIG_ISCSI_TCP is not set +# CONFIG_SCSI_BNX2_ISCSI is not set +# CONFIG_BLK_DEV_3W_XXXX_RAID is not set +# CONFIG_SCSI_3W_9XXX is not set +# CONFIG_SCSI_ACARD is not set +# CONFIG_SCSI_AACRAID is not set +# CONFIG_SCSI_AIC7XXX is not set +# CONFIG_SCSI_AIC7XXX_OLD is not set +# CONFIG_SCSI_AIC79XX is not set +# CONFIG_SCSI_AIC94XX is not set +# CONFIG_SCSI_MVSAS is not set +# CONFIG_SCSI_DPT_I2O is not set +# CONFIG_SCSI_ADVANSYS is not set +# CONFIG_SCSI_ARCMSR is not set +# CONFIG_MEGARAID_NEWGEN is not set +# CONFIG_MEGARAID_LEGACY is not set +# CONFIG_MEGARAID_SAS is not set +# CONFIG_SCSI_MPT2SAS is not set +# CONFIG_SCSI_HPTIOP is not set +# CONFIG_SCSI_BUSLOGIC is not set +# CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set +# CONFIG_FCOE is not set +# CONFIG_SCSI_DMX3191D is not set +# CONFIG_SCSI_EATA is not set +# CONFIG_SCSI_FUTURE_DOMAIN is not set +# CONFIG_SCSI_GDTH is not set +# CONFIG_SCSI_IPS is not set +# CONFIG_SCSI_INITIO is not set +# CONFIG_SCSI_INIA100 is not set +# CONFIG_SCSI_STEX is not set +# CONFIG_SCSI_SYM53C8XX_2 is not set +# CONFIG_SCSI_QLOGIC_1280 is not set +# CONFIG_SCSI_QLA_FC is not set +# CONFIG_SCSI_QLA_ISCSI is not set +# CONFIG_SCSI_LPFC is not set +# CONFIG_SCSI_DC395x is not set +# CONFIG_SCSI_DC390T is not set +# CONFIG_SCSI_NSP32 is not set +# CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_SRP is not set +# CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +CONFIG_FUSION=y +# CONFIG_FUSION_SPI is not set +# CONFIG_FUSION_FC is not set +CONFIG_FUSION_SAS=y +CONFIG_FUSION_MAX_SGE=128 +# CONFIG_FUSION_CTL is not set +# CONFIG_FUSION_LOGGING is not set + +# +# IEEE 1394 (FireWire) support +# + +# +# You can enable one or both FireWire driver stacks. +# + +# +# See the help texts for more information. +# +# CONFIG_FIREWIRE is not set +# CONFIG_IEEE1394 is not set +CONFIG_I2O=y +CONFIG_I2O_LCT_NOTIFY_ON_CHANGES=y +CONFIG_I2O_EXT_ADAPTEC=y +# CONFIG_I2O_CONFIG is not set +# CONFIG_I2O_BUS is not set +# CONFIG_I2O_BLOCK is not set +# CONFIG_I2O_SCSI is not set +# CONFIG_I2O_PROC is not set +# CONFIG_MACINTOSH_DRIVERS is not set +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_VETH is not set +# CONFIG_ARCNET is not set +# CONFIG_PHYLIB is not set +CONFIG_NET_ETHERNET=y +# CONFIG_MII is not set +# CONFIG_HAPPYMEAL is not set +# CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set +# CONFIG_NET_VENDOR_3COM is not set +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set +# CONFIG_NET_TULIP is not set +# CONFIG_HP100 is not set +CONFIG_IBM_NEW_EMAC=y +CONFIG_IBM_NEW_EMAC_RXB=256 +CONFIG_IBM_NEW_EMAC_TXB=256 +CONFIG_IBM_NEW_EMAC_POLL_WEIGHT=32 +CONFIG_IBM_NEW_EMAC_RX_COPY_THRESHOLD=256 +CONFIG_IBM_NEW_EMAC_RX_SKB_HEADROOM=0 +# CONFIG_IBM_NEW_EMAC_DEBUG is not set +CONFIG_IBM_NEW_EMAC_ZMII=y +CONFIG_IBM_NEW_EMAC_RGMII=y +CONFIG_IBM_NEW_EMAC_TAH=y +CONFIG_IBM_NEW_EMAC_EMAC4=y +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set +# CONFIG_NET_PCI is not set +# CONFIG_B44 is not set +# CONFIG_KS8842 is not set +# CONFIG_ATL2 is not set +CONFIG_NETDEV_1000=y +# CONFIG_ACENIC is not set +# CONFIG_DL2K is not set +# CONFIG_E1000 is not set +CONFIG_E1000E=y +# CONFIG_IP1000 is not set +# CONFIG_IGB is not set +# CONFIG_IGBVF is not set +# CONFIG_NS83820 is not set +# CONFIG_HAMACHI is not set +# CONFIG_YELLOWFIN is not set +# CONFIG_R8169 is not set +# CONFIG_SIS190 is not set +# CONFIG_SKGE is not set +# CONFIG_SKY2 is not set +# CONFIG_VIA_VELOCITY is not set +# CONFIG_TIGON3 is not set +# CONFIG_BNX2 is not set +# CONFIG_CNIC is not set +# CONFIG_MV643XX_ETH is not set +# CONFIG_XILINX_LL_TEMAC is not set +# CONFIG_QLA3XXX is not set +# CONFIG_ATL1 is not set +# CONFIG_ATL1E is not set +# CONFIG_ATL1C is not set +# CONFIG_JME is not set +# CONFIG_NETDEV_10000 is not set +# CONFIG_TR is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# +# CONFIG_WAN is not set +# CONFIG_FDDI is not set +# CONFIG_HIPPI is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_NET_FC is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set +# CONFIG_PHONE is not set + +# +# Input device support +# +# CONFIG_INPUT is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +# CONFIG_VT is not set +CONFIG_DEVKMEM=y +# CONFIG_SERIAL_NONSTANDARD is not set +# CONFIG_NOZOMI is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +# CONFIG_SERIAL_8250_PCI is not set +CONFIG_SERIAL_8250_NR_UARTS=2 +CONFIG_SERIAL_8250_RUNTIME_UARTS=2 +CONFIG_SERIAL_8250_EXTENDED=y +# CONFIG_SERIAL_8250_MANY_PORTS is not set +CONFIG_SERIAL_8250_SHARE_IRQ=y +# CONFIG_SERIAL_8250_DETECT_IRQ is not set +# CONFIG_SERIAL_8250_RSA is not set + +# +# Non-8250 serial port support +# +# CONFIG_SERIAL_UARTLITE is not set +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set +CONFIG_SERIAL_OF_PLATFORM=y +# CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set +CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_HVC_UDBG is not set +# CONFIG_IPMI_HANDLER is not set +# CONFIG_HW_RANDOM is not set +# CONFIG_NVRAM is not set +# CONFIG_GEN_RTC is not set +# CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_DEVPORT=y +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_CHARDEV=y +CONFIG_I2C_HELPER_AUTO=y + +# +# I2C Hardware Bus support +# + +# +# PC SMBus host controller drivers +# +# CONFIG_I2C_ALI1535 is not set +# CONFIG_I2C_ALI1563 is not set +# CONFIG_I2C_ALI15X3 is not set +# CONFIG_I2C_AMD756 is not set +# CONFIG_I2C_AMD8111 is not set +# CONFIG_I2C_I801 is not set +# CONFIG_I2C_ISCH is not set +# CONFIG_I2C_PIIX4 is not set +# CONFIG_I2C_NFORCE2 is not set +# CONFIG_I2C_SIS5595 is not set +# CONFIG_I2C_SIS630 is not set +# CONFIG_I2C_SIS96X is not set +# CONFIG_I2C_VIA is not set +# CONFIG_I2C_VIAPRO is not set + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +CONFIG_I2C_IBM_IIC=y +# CONFIG_I2C_MPC is not set +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set + +# +# Graphics adapter I2C/DDC channel drivers +# +# CONFIG_I2C_VOODOO3 is not set + +# +# Other I2C/SMBus bus drivers +# +# CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_STUB is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_DS1682 is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_PCF8575 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_TSL2550 is not set +CONFIG_I2C_DEBUG_CORE=y +CONFIG_I2C_DEBUG_ALGO=y +CONFIG_I2C_DEBUG_BUS=y +CONFIG_I2C_DEBUG_CHIP=y +# CONFIG_SPI is not set + +# +# PPS support +# +# CONFIG_PPS is not set +CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y +# CONFIG_GPIOLIB is not set +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set +# CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y + +# +# Sonics Silicon Backplane +# +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_TWL4030_CORE is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_PCF50633 is not set +# CONFIG_AB3100_CORE is not set +# CONFIG_REGULATOR is not set +# CONFIG_MEDIA_SUPPORT is not set + +# +# Graphics support +# +# CONFIG_AGP is not set +# CONFIG_DRM is not set +# CONFIG_VGASTATE is not set +CONFIG_VIDEO_OUTPUT_CONTROL=m +# CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set +# CONFIG_SOUND is not set +# CONFIG_USB_SUPPORT is not set +# CONFIG_UWB is not set +# CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set +# CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set +# CONFIG_INFINIBAND is not set +# CONFIG_EDAC is not set +# CONFIG_RTC_CLASS is not set +CONFIG_DMADEVICES=y + +# +# DMA Devices +# +# CONFIG_AUXDISPLAY is not set +# CONFIG_UIO is not set + +# +# TI VLYNQ +# +# CONFIG_STAGING is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +# CONFIG_EXT3_FS is not set +# CONFIG_EXT4_FS is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y +CONFIG_DNOTIFY=y +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# Caches +# +# CONFIG_FSCACHE is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set +CONFIG_MISC_FILESYSTEMS=y +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_JFFS2_FS is not set +CONFIG_CRAMFS=y +# CONFIG_SQUASHFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +# CONFIG_NFS_V4 is not set +CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_NLS is not set +# CONFIG_DLM is not set +# CONFIG_BINARY_PRINTF is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_DECOMPRESS_GZIP=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y +CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y +CONFIG_GENERIC_ATOMIC64=y + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 +CONFIG_MAGIC_SYSRQ=y +# CONFIG_UNUSED_SYMBOLS is not set +CONFIG_DEBUG_FS=y +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 +CONFIG_SCHED_DEBUG=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set +# CONFIG_SLUB_DEBUG_ON is not set +# CONFIG_SLUB_STATS is not set +# CONFIG_DEBUG_KMEMLEAK is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +CONFIG_SYSCTL_SYSCALL_CHECK=y +# CONFIG_DEBUG_PAGEALLOC is not set +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACING_SUPPORT=y +CONFIG_FTRACE=y +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_ENABLE_DEFAULT_TRACERS is not set +# CONFIG_BOOT_TRACER is not set +CONFIG_BRANCH_PROFILE_NONE=y +# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set +# CONFIG_PROFILE_ALL_BRANCHES is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_DYNAMIC_DEBUG is not set +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set +# CONFIG_KMEMCHECK is not set +# CONFIG_PPC_DISABLE_WERROR is not set +CONFIG_PPC_WERROR=y +CONFIG_PRINT_STACK_DEPTH=64 +# CONFIG_DEBUG_STACKOVERFLOW is not set +# CONFIG_DEBUG_STACK_USAGE is not set +# CONFIG_PPC_EMULATED_STATS is not set +# CONFIG_CODE_PATCHING_SELFTEST is not set +# CONFIG_FTR_FIXUP_SELFTEST is not set +# CONFIG_MSI_BITMAP_SELFTEST is not set +# CONFIG_XMON is not set +# CONFIG_IRQSTACKS is not set +# CONFIG_VIRQ_DEBUG is not set +# CONFIG_BDI_SWITCH is not set +# CONFIG_PPC_EARLY_DEBUG is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +# CONFIG_CRYPTO_FIPS is not set +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD=y +CONFIG_CRYPTO_AEAD2=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG=y +CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y +CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y +CONFIG_CRYPTO_GF128MUL=y +# CONFIG_CRYPTO_NULL is not set +CONFIG_CRYPTO_WORKQUEUE=y +CONFIG_CRYPTO_CRYPTD=y +CONFIG_CRYPTO_AUTHENC=y +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +CONFIG_CRYPTO_CCM=y +CONFIG_CRYPTO_GCM=y +CONFIG_CRYPTO_SEQIV=y + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +CONFIG_CRYPTO_CTR=y +CONFIG_CRYPTO_CTS=y +CONFIG_CRYPTO_ECB=y +CONFIG_CRYPTO_LRW=y +CONFIG_CRYPTO_PCBC=y +CONFIG_CRYPTO_XTS=y + +# +# Hash modes +# +CONFIG_CRYPTO_HMAC=y +CONFIG_CRYPTO_XCBC=y + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set +CONFIG_CRYPTO_MD4=y +CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set +CONFIG_CRYPTO_SHA1=y +CONFIG_CRYPTO_SHA256=y +CONFIG_CRYPTO_SHA512=y +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# +CONFIG_CRYPTO_AES=y +# CONFIG_CRYPTO_ANUBIS is not set +CONFIG_CRYPTO_ARC4=y +CONFIG_CRYPTO_BLOWFISH=y +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set +# CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set +CONFIG_CRYPTO_HW=y +# CONFIG_CRYPTO_DEV_HIFN_795X is not set +# CONFIG_CRYPTO_DEV_PPC4XX is not set +# CONFIG_PPC_CLOCK is not set +# CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/platforms/44x/Kconfig b/arch/powerpc/platforms/44x/Kconfig index 90e3192611a..7486bffd3eb 100644 --- a/arch/powerpc/platforms/44x/Kconfig +++ b/arch/powerpc/platforms/44x/Kconfig @@ -129,6 +129,18 @@ config REDWOOD help This option enables support for the AMCC PPC460SX Redwood board. +config EIGER + bool "Eiger" + depends on 44x + default n + select PPC44x_SIMPLE + select 460SX + select PCI + select PPC4xx_PCI_EXPRESS + select IBM_NEW_EMAC_RGMII + help + This option enables support for the AMCC PPC460SX evaluation board. + config YOSEMITE bool "Yosemite" depends on 44x diff --git a/arch/powerpc/platforms/44x/ppc44x_simple.c b/arch/powerpc/platforms/44x/ppc44x_simple.c index 5bcd441885e..e8c23ccaa1f 100644 --- a/arch/powerpc/platforms/44x/ppc44x_simple.c +++ b/arch/powerpc/platforms/44x/ppc44x_simple.c @@ -55,6 +55,7 @@ static char *board[] __initdata = { "amcc,canyonlands", "amcc,glacier", "ibm,ebony", + "amcc,eiger", "amcc,katmai", "amcc,rainier", "amcc,redwood", -- cgit v1.2.3-70-g09d2 From 0cdf50a7c65df894fb5fd0ef181fe18b8fec6137 Mon Sep 17 00:00:00 2001 From: Solomon Peachy Date: Thu, 20 Aug 2009 10:19:47 +0000 Subject: powerpc/40x: Add support for the ESTeem 195E (PPC405EP) SBC This patch adds support for the ESTeem 195E Hotfoot SBC. There are several variants of the SBC deployed, single/dual ethernet+serial, and also 4MB/8MB flash variations. In the interest of having a single kernel image boot on all boards, the cuboot shim detects the differences and mangles the DTS tree appropriately. With the exception of the CF interface that was never populated on production boards, this code/DTS supports all boardpop options. Signed-off-by: Solomon Peachy Signed-off-by: Josh Boyer --- arch/powerpc/boot/Makefile | 4 +- arch/powerpc/boot/cuboot-hotfoot.c | 142 ++++++++++++++ arch/powerpc/boot/dts/hotfoot.dts | 294 +++++++++++++++++++++++++++++ arch/powerpc/boot/ppcboot-hotfoot.h | 133 +++++++++++++ arch/powerpc/platforms/40x/Kconfig | 10 + arch/powerpc/platforms/40x/ppc40x_simple.c | 3 +- 6 files changed, 584 insertions(+), 2 deletions(-) create mode 100644 arch/powerpc/boot/cuboot-hotfoot.c create mode 100644 arch/powerpc/boot/dts/hotfoot.dts create mode 100644 arch/powerpc/boot/ppcboot-hotfoot.h (limited to 'arch') diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile index 9ae7b7e2ba7..5a109a93753 100644 --- a/arch/powerpc/boot/Makefile +++ b/arch/powerpc/boot/Makefile @@ -39,6 +39,7 @@ DTS_FLAGS ?= -p 1024 $(obj)/4xx.o: BOOTCFLAGS += -mcpu=405 $(obj)/ebony.o: BOOTCFLAGS += -mcpu=405 +$(obj)/cuboot-hotfoot.o: BOOTCFLAGS += -mcpu=405 $(obj)/cuboot-taishan.o: BOOTCFLAGS += -mcpu=405 $(obj)/cuboot-katmai.o: BOOTCFLAGS += -mcpu=405 $(obj)/cuboot-acadia.o: BOOTCFLAGS += -mcpu=405 @@ -67,7 +68,7 @@ src-wlib := string.S crt0.S crtsavres.S stdio.c main.c \ cpm-serial.c stdlib.c mpc52xx-psc.c planetcore.c uartlite.c \ fsl-soc.c mpc8xx.c pq2.c src-plat := of.c cuboot-52xx.c cuboot-824x.c cuboot-83xx.c cuboot-85xx.c holly.c \ - cuboot-ebony.c treeboot-ebony.c prpmc2800.c \ + cuboot-ebony.c cuboot-hotfoot.c treeboot-ebony.c prpmc2800.c \ ps3-head.S ps3-hvcall.S ps3.c treeboot-bamboo.c cuboot-8xx.c \ cuboot-pq2.c cuboot-sequoia.c treeboot-walnut.c \ cuboot-bamboo.c cuboot-mpc7448hpc2.c cuboot-taishan.c \ @@ -190,6 +191,7 @@ image-$(CONFIG_DEFAULT_UIMAGE) += uImage # Board ports in arch/powerpc/platform/40x/Kconfig image-$(CONFIG_EP405) += dtbImage.ep405 +image-$(CONFIG_HOTFOOT) += cuImage.hotfoot image-$(CONFIG_WALNUT) += treeImage.walnut image-$(CONFIG_ACADIA) += cuImage.acadia diff --git a/arch/powerpc/boot/cuboot-hotfoot.c b/arch/powerpc/boot/cuboot-hotfoot.c new file mode 100644 index 00000000000..8f697b958e4 --- /dev/null +++ b/arch/powerpc/boot/cuboot-hotfoot.c @@ -0,0 +1,142 @@ +/* + * Old U-boot compatibility for Esteem 195E Hotfoot CPU Board + * + * Author: Solomon Peachy + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include "ops.h" +#include "stdio.h" +#include "reg.h" +#include "dcr.h" +#include "4xx.h" +#include "cuboot.h" + +#define TARGET_4xx +#define TARGET_HOTFOOT + +#include "ppcboot-hotfoot.h" + +static bd_t bd; + +#define NUM_REGS 3 + +static void hotfoot_fixups(void) +{ + u32 uart = mfdcr(DCRN_CPC0_UCR) & 0x7f; + + dt_fixup_memory(bd.bi_memstart, bd.bi_memsize); + + dt_fixup_cpu_clocks(bd.bi_procfreq, bd.bi_procfreq, 0); + dt_fixup_clock("/plb", bd.bi_plb_busfreq); + dt_fixup_clock("/plb/opb", bd.bi_opbfreq); + dt_fixup_clock("/plb/ebc", bd.bi_pci_busfreq); + dt_fixup_clock("/plb/opb/serial@ef600300", bd.bi_procfreq / uart); + dt_fixup_clock("/plb/opb/serial@ef600400", bd.bi_procfreq / uart); + + dt_fixup_mac_address_by_alias("ethernet0", bd.bi_enetaddr); + dt_fixup_mac_address_by_alias("ethernet1", bd.bi_enet1addr); + + /* Is this a single eth/serial board? */ + if ((bd.bi_enet1addr[0] == 0) && + (bd.bi_enet1addr[1] == 0) && + (bd.bi_enet1addr[2] == 0) && + (bd.bi_enet1addr[3] == 0) && + (bd.bi_enet1addr[4] == 0) && + (bd.bi_enet1addr[5] == 0)) { + void *devp; + + printf("Trimming devtree for single serial/eth board\n"); + + devp = finddevice("/plb/opb/serial@ef600300"); + if (!devp) + fatal("Can't find node for /plb/opb/serial@ef600300"); + del_node(devp); + + devp = finddevice("/plb/opb/ethernet@ef600900"); + if (!devp) + fatal("Can't find node for /plb/opb/ethernet@ef600900"); + del_node(devp); + } + + ibm4xx_quiesce_eth((u32 *)0xef600800, (u32 *)0xef600900); + + /* Fix up flash size in fdt for 4M boards. */ + if (bd.bi_flashsize < 0x800000) { + u32 regs[NUM_REGS]; + void *devp = finddevice("/plb/ebc/nor_flash@0"); + if (!devp) + fatal("Can't find FDT node for nor_flash!??"); + + printf("Fixing devtree for 4M Flash\n"); + + /* First fix up the base addresse */ + getprop(devp, "reg", regs, sizeof(regs)); + regs[0] = 0; + regs[1] = 0xffc00000; + regs[2] = 0x00400000; + setprop(devp, "reg", regs, sizeof(regs)); + + /* Then the offsets */ + devp = finddevice("/plb/ebc/nor_flash@0/partition@0"); + if (!devp) + fatal("Can't find FDT node for partition@0"); + getprop(devp, "reg", regs, 2*sizeof(u32)); + regs[0] -= 0x400000; + setprop(devp, "reg", regs, 2*sizeof(u32)); + + devp = finddevice("/plb/ebc/nor_flash@0/partition@1"); + if (!devp) + fatal("Can't find FDT node for partition@1"); + getprop(devp, "reg", regs, 2*sizeof(u32)); + regs[0] -= 0x400000; + setprop(devp, "reg", regs, 2*sizeof(u32)); + + devp = finddevice("/plb/ebc/nor_flash@0/partition@2"); + if (!devp) + fatal("Can't find FDT node for partition@2"); + getprop(devp, "reg", regs, 2*sizeof(u32)); + regs[0] -= 0x400000; + setprop(devp, "reg", regs, 2*sizeof(u32)); + + devp = finddevice("/plb/ebc/nor_flash@0/partition@3"); + if (!devp) + fatal("Can't find FDT node for partition@3"); + getprop(devp, "reg", regs, 2*sizeof(u32)); + regs[0] -= 0x400000; + setprop(devp, "reg", regs, 2*sizeof(u32)); + + devp = finddevice("/plb/ebc/nor_flash@0/partition@4"); + if (!devp) + fatal("Can't find FDT node for partition@4"); + getprop(devp, "reg", regs, 2*sizeof(u32)); + regs[0] -= 0x400000; + setprop(devp, "reg", regs, 2*sizeof(u32)); + + devp = finddevice("/plb/ebc/nor_flash@0/partition@6"); + if (!devp) + fatal("Can't find FDT node for partition@6"); + getprop(devp, "reg", regs, 2*sizeof(u32)); + regs[0] -= 0x400000; + setprop(devp, "reg", regs, 2*sizeof(u32)); + + /* Delete the FeatFS node */ + devp = finddevice("/plb/ebc/nor_flash@0/partition@5"); + if (!devp) + fatal("Can't find FDT node for partition@5"); + del_node(devp); + } +} + +void platform_init(unsigned long r3, unsigned long r4, unsigned long r5, + unsigned long r6, unsigned long r7) +{ + CUBOOT_INIT(); + platform_ops.fixups = hotfoot_fixups; + platform_ops.exit = ibm40x_dbcr_reset; + fdt_init(_dtb_start); + serial_console_init(); +} diff --git a/arch/powerpc/boot/dts/hotfoot.dts b/arch/powerpc/boot/dts/hotfoot.dts new file mode 100644 index 00000000000..cad9c3840af --- /dev/null +++ b/arch/powerpc/boot/dts/hotfoot.dts @@ -0,0 +1,294 @@ +/* + * Device Tree Source for ESTeem 195E Hotfoot + * + * Copyright 2009 AbsoluteValue Systems + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without + * any warranty of any kind, whether express or implied. + */ + +/dts-v1/; + +/ { + #address-cells = <1>; + #size-cells = <1>; + model = "est,hotfoot"; + compatible = "est,hotfoot"; + dcr-parent = <&{/cpus/cpu@0}>; + + aliases { + ethernet0 = &EMAC0; + ethernet1 = &EMAC1; + serial0 = &UART0; + serial1 = &UART1; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + model = "PowerPC,405EP"; + reg = <0x00000000>; + clock-frequency = <0>; /* Filled in by zImage */ + timebase-frequency = <0>; /* Filled in by zImage */ + i-cache-line-size = <0x20>; + d-cache-line-size = <0x20>; + i-cache-size = <0x4000>; + d-cache-size = <0x4000>; + dcr-controller; + dcr-access-method = "native"; + }; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x00000000>; /* Filled in by zImage */ + }; + + UIC0: interrupt-controller { + compatible = "ibm,uic"; + interrupt-controller; + cell-index = <0>; + dcr-reg = <0x0c0 0x009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + }; + + plb { + compatible = "ibm,plb3"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + clock-frequency = <0>; /* Filled in by zImage */ + + SDRAM0: memory-controller { + compatible = "ibm,sdram-405ep"; + dcr-reg = <0x010 0x002>; + }; + + MAL: mcmal { + compatible = "ibm,mcmal-405ep", "ibm,mcmal"; + dcr-reg = <0x180 0x062>; + num-tx-chans = <4>; + num-rx-chans = <2>; + interrupt-parent = <&UIC0>; + interrupts = < + 0xb 0x4 /* TXEOB */ + 0xc 0x4 /* RXEOB */ + 0xa 0x4 /* SERR */ + 0xd 0x4 /* TXDE */ + 0xe 0x4 /* RXDE */>; + }; + + POB0: opb { + compatible = "ibm,opb-405ep", "ibm,opb"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0xef600000 0xef600000 0x00a00000>; + dcr-reg = <0x0a0 0x005>; + clock-frequency = <0>; /* Filled in by zImage */ + + /* Hotfoot has UART0/UART1 swapped */ + + UART0: serial@ef600400 { + device_type = "serial"; + compatible = "ns16550"; + reg = <0xef600400 0x00000008>; + virtual-reg = <0xef600400>; + clock-frequency = <0>; /* Filled in by zImage */ + current-speed = <0x9600>; + interrupt-parent = <&UIC0>; + interrupts = <0x1 0x4>; + }; + + UART1: serial@ef600300 { + device_type = "serial"; + compatible = "ns16550"; + reg = <0xef600300 0x00000008>; + virtual-reg = <0xef600300>; + clock-frequency = <0>; /* Filled in by zImage */ + current-speed = <0x9600>; + interrupt-parent = <&UIC0>; + interrupts = <0x0 0x4>; + }; + + IIC: i2c@ef600500 { + compatible = "ibm,iic-405ep", "ibm,iic"; + reg = <0xef600500 0x00000011>; + interrupt-parent = <&UIC0>; + interrupts = <0x2 0x4>; + + rtc@68 { + /* Actually a DS1339 */ + compatible = "dallas,ds1307"; + reg = <0x68>; + }; + + temp@4a { + /* Not present on all boards */ + compatible = "national,lm75"; + reg = <0x4a>; + }; + }; + + GPIO: gpio@ef600700 { + #gpio-cells = <2>; + compatible = "ibm,ppc4xx-gpio"; + reg = <0xef600700 0x00000020>; + gpio-controller; + }; + + gpio-leds { + compatible = "gpio-leds"; + status { + label = "Status"; + gpios = <&GPIO 1 0>; + }; + radiorx { + label = "Rx"; + gpios = <&GPIO 0xe 0>; + }; + }; + + EMAC0: ethernet@ef600800 { + linux,network-index = <0x0>; + device_type = "network"; + compatible = "ibm,emac-405ep", "ibm,emac"; + interrupt-parent = <&UIC0>; + interrupts = < + 0xf 0x4 /* Ethernet */ + 0x9 0x4 /* Ethernet Wake Up */>; + local-mac-address = [000000000000]; /* Filled in by zImage */ + reg = <0xef600800 0x00000070>; + mal-device = <&MAL>; + mal-tx-channel = <0>; + mal-rx-channel = <0>; + cell-index = <0>; + max-frame-size = <0x5dc>; + rx-fifo-size = <0x1000>; + tx-fifo-size = <0x800>; + phy-mode = "mii"; + phy-map = <0x00000000>; + }; + + EMAC1: ethernet@ef600900 { + linux,network-index = <0x1>; + device_type = "network"; + compatible = "ibm,emac-405ep", "ibm,emac"; + interrupt-parent = <&UIC0>; + interrupts = < + 0x11 0x4 /* Ethernet */ + 0x9 0x4 /* Ethernet Wake Up */>; + local-mac-address = [000000000000]; /* Filled in by zImage */ + reg = <0xef600900 0x00000070>; + mal-device = <&MAL>; + mal-tx-channel = <2>; + mal-rx-channel = <1>; + cell-index = <1>; + max-frame-size = <0x5dc>; + rx-fifo-size = <0x1000>; + tx-fifo-size = <0x800>; + mdio-device = <&EMAC0>; + phy-mode = "mii"; + phy-map = <0x0000001>; + }; + }; + + EBC0: ebc { + compatible = "ibm,ebc-405ep", "ibm,ebc"; + dcr-reg = <0x012 0x002>; + #address-cells = <2>; + #size-cells = <1>; + + /* The ranges property is supplied by the bootwrapper + * and is based on the firmware's configuration of the + * EBC bridge + */ + clock-frequency = <0>; /* Filled in by zImage */ + + nor_flash@0 { + compatible = "cfi-flash"; + bank-width = <2>; + reg = <0x0 0xff800000 0x00800000>; + #address-cells = <1>; + #size-cells = <1>; + + /* This mapping is for the 8M flash + 4M flash has all ofssets -= 4M, + and FeatFS partition is not present */ + partition@0 { + label = "Bootloader"; + reg = <0x7c0000 0x40000>; + /* read-only; */ + }; + partition@1 { + label = "Env_and_Config_Primary"; + reg = <0x400000 0x10000>; + }; + partition@2 { + label = "Kernel"; + reg = <0x420000 0x100000>; + }; + partition@3 { + label = "Filesystem"; + reg = <0x520000 0x2a0000>; + }; + partition@4 { + label = "Env_and_Config_Secondary"; + reg = <0x410000 0x10000>; + }; + partition@5 { + label = "FeatFS"; + reg = <0x000000 0x400000>; + }; + partition@6 { + label = "Bootloader_Env"; + reg = <0x7d0000 0x10000>; + }; + }; + }; + + PCI0: pci@ec000000 { + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + compatible = "ibm,plb405ep-pci", "ibm,plb-pci"; + primary; + reg = <0xeec00000 0x00000008 /* Config space access */ + 0xeed80000 0x00000004 /* IACK */ + 0xeed80000 0x00000004 /* Special cycle */ + 0xef480000 0x00000040>; /* Internal registers */ + + /* Outbound ranges, one memory and one IO, + * later cannot be changed. Chip supports a second + * IO range but we don't use it for now + */ + ranges = <0x02000000 0x00000000 0x80000000 0x80000000 0x00000000 0x20000000 + 0x01000000 0x00000000 0x00000000 0xe8000000 0x00000000 0x00010000>; + + /* Inbound 2GB range starting at 0 */ + dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x80000000>; + + interrupt-parent = <&UIC0>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; + interrupt-map = < + /* IDSEL 3 -- slot1 (optional) 27/29 A/B IRQ2/4 */ + 0x1800 0x0 0x0 0x1 &UIC0 0x1b 0x8 + 0x1800 0x0 0x0 0x2 &UIC0 0x1d 0x8 + + /* IDSEL 4 -- slot0, 26/28 A/B IRQ1/3 */ + 0x2000 0x0 0x0 0x1 &UIC0 0x1a 0x8 + 0x2000 0x0 0x0 0x2 &UIC0 0x1c 0x8 + >; + }; + }; + + chosen { + linux,stdout-path = &UART0; + }; +}; diff --git a/arch/powerpc/boot/ppcboot-hotfoot.h b/arch/powerpc/boot/ppcboot-hotfoot.h new file mode 100644 index 00000000000..1a3e80b533d --- /dev/null +++ b/arch/powerpc/boot/ppcboot-hotfoot.h @@ -0,0 +1,133 @@ +/* + * This interface is used for compatibility with old U-boots *ONLY*. + * Please do not imitate or extend this. + */ + +/* + * Unfortunately, the ESTeem Hotfoot board uses a mangled version of + * ppcboot.h for historical reasons, and in the interest of having a + * mainline kernel boot on the production board+bootloader, this was the + * least-offensive solution. Please direct all flames to: + * + * Solomon Peachy + * + * (This header is identical to ppcboot.h except for the + * TARGET_HOTFOOT bits) + */ + +/* + * (C) Copyright 2000, 2001 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __PPCBOOT_H__ +#define __PPCBOOT_H__ + +/* + * Board information passed to kernel from PPCBoot + * + * include/asm-ppc/ppcboot.h + */ + +#include "types.h" + +typedef struct bd_info { + unsigned long bi_memstart; /* start of DRAM memory */ + unsigned long bi_memsize; /* size of DRAM memory in bytes */ + unsigned long bi_flashstart; /* start of FLASH memory */ + unsigned long bi_flashsize; /* size of FLASH memory */ + unsigned long bi_flashoffset; /* reserved area for startup monitor */ + unsigned long bi_sramstart; /* start of SRAM memory */ + unsigned long bi_sramsize; /* size of SRAM memory */ +#if defined(TARGET_8xx) || defined(TARGET_CPM2) || defined(TARGET_85xx) ||\ + defined(TARGET_83xx) + unsigned long bi_immr_base; /* base of IMMR register */ +#endif +#if defined(TARGET_PPC_MPC52xx) + unsigned long bi_mbar_base; /* base of internal registers */ +#endif + unsigned long bi_bootflags; /* boot / reboot flag (for LynxOS) */ + unsigned long bi_ip_addr; /* IP Address */ + unsigned char bi_enetaddr[6]; /* Ethernet address */ +#if defined(TARGET_HOTFOOT) + /* second onboard ethernet port */ + unsigned char bi_enet1addr[6]; +#define HAVE_ENET1ADDR +#endif /* TARGET_HOOTFOOT */ + unsigned short bi_ethspeed; /* Ethernet speed in Mbps */ + unsigned long bi_intfreq; /* Internal Freq, in MHz */ + unsigned long bi_busfreq; /* Bus Freq, in MHz */ +#if defined(TARGET_CPM2) + unsigned long bi_cpmfreq; /* CPM_CLK Freq, in MHz */ + unsigned long bi_brgfreq; /* BRG_CLK Freq, in MHz */ + unsigned long bi_sccfreq; /* SCC_CLK Freq, in MHz */ + unsigned long bi_vco; /* VCO Out from PLL, in MHz */ +#endif +#if defined(TARGET_PPC_MPC52xx) + unsigned long bi_ipbfreq; /* IPB Bus Freq, in MHz */ + unsigned long bi_pcifreq; /* PCI Bus Freq, in MHz */ +#endif + unsigned long bi_baudrate; /* Console Baudrate */ +#if defined(TARGET_4xx) + unsigned char bi_s_version[4]; /* Version of this structure */ + unsigned char bi_r_version[32]; /* Version of the ROM (IBM) */ + unsigned int bi_procfreq; /* CPU (Internal) Freq, in Hz */ + unsigned int bi_plb_busfreq; /* PLB Bus speed, in Hz */ + unsigned int bi_pci_busfreq; /* PCI Bus speed, in Hz */ + unsigned char bi_pci_enetaddr[6]; /* PCI Ethernet MAC address */ +#endif +#if defined(TARGET_HOTFOOT) + unsigned int bi_pllouta_freq; /* PLL OUTA speed, in Hz */ +#endif +#if defined(TARGET_HYMOD) + hymod_conf_t bi_hymod_conf; /* hymod configuration information */ +#endif +#if defined(TARGET_EVB64260) || defined(TARGET_405EP) || defined(TARGET_44x) || \ + defined(TARGET_85xx) || defined(TARGET_83xx) || defined(TARGET_HAS_ETH1) + /* second onboard ethernet port */ + unsigned char bi_enet1addr[6]; +#define HAVE_ENET1ADDR +#endif +#if defined(TARGET_EVB64260) || defined(TARGET_440GX) || \ + defined(TARGET_85xx) || defined(TARGET_HAS_ETH2) + /* third onboard ethernet ports */ + unsigned char bi_enet2addr[6]; +#define HAVE_ENET2ADDR +#endif +#if defined(TARGET_440GX) || defined(TARGET_HAS_ETH3) + /* fourth onboard ethernet ports */ + unsigned char bi_enet3addr[6]; +#define HAVE_ENET3ADDR +#endif +#if defined(TARGET_HOTFOOT) + int bi_phynum[2]; /* Determines phy mapping */ + int bi_phymode[2]; /* Determines phy mode */ +#endif +#if defined(TARGET_4xx) + unsigned int bi_opbfreq; /* OB clock in Hz */ + int bi_iic_fast[2]; /* Use fast i2c mode */ +#endif +#if defined(TARGET_440GX) + int bi_phynum[4]; /* phy mapping */ + int bi_phymode[4]; /* phy mode */ +#endif +} bd_t; + +#define bi_tbfreq bi_intfreq + +#endif /* __PPCBOOT_H__ */ diff --git a/arch/powerpc/platforms/40x/Kconfig b/arch/powerpc/platforms/40x/Kconfig index a6e43cb6f82..ec64264f7a5 100644 --- a/arch/powerpc/platforms/40x/Kconfig +++ b/arch/powerpc/platforms/40x/Kconfig @@ -40,6 +40,16 @@ config HCU4 help This option enables support for the Nestal Maschinen HCU4 board. +config HOTFOOT + bool "Hotfoot" + depends on 40x + default n + select 405EP + select PPC40x_SIMPLE + select PCI + help + This option enables support for the ESTEEM 195E Hotfoot board. + config KILAUEA bool "Kilauea" depends on 40x diff --git a/arch/powerpc/platforms/40x/ppc40x_simple.c b/arch/powerpc/platforms/40x/ppc40x_simple.c index 5fd5a597400..546bbc229d1 100644 --- a/arch/powerpc/platforms/40x/ppc40x_simple.c +++ b/arch/powerpc/platforms/40x/ppc40x_simple.c @@ -54,7 +54,8 @@ static char *board[] __initdata = { "amcc,acadia", "amcc,haleakala", "amcc,kilauea", - "amcc,makalu" + "amcc,makalu", + "est,hotfoot" }; static int __init ppc40x_probe(void) -- cgit v1.2.3-70-g09d2 From 0484c1df473815020bdce4b46b861395759686e5 Mon Sep 17 00:00:00 2001 From: Tiejun Chen Date: Sat, 22 Aug 2009 16:03:43 +0000 Subject: powerpc/405ex: provide necessary fixup function to support cuImage For cuImage format it's necessary to provide clock fixups since u-boot will not pass necessary clock frequency into the dtb included into cuImage so we implement the clock fixups as defined in the technical documentation for the board and update header file with the basic register definitions. Signed-off-by: Tiejun Chen Signed-off-by: Josh Boyer --- arch/powerpc/boot/4xx.c | 142 ++++++++++++++++++++++++++++++++++++++++++++++++ arch/powerpc/boot/4xx.h | 1 + arch/powerpc/boot/dcr.h | 4 +- 3 files changed, 144 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/boot/4xx.c b/arch/powerpc/boot/4xx.c index 325b310573b..27db8938827 100644 --- a/arch/powerpc/boot/4xx.c +++ b/arch/powerpc/boot/4xx.c @@ -8,6 +8,10 @@ * Eugene Surovegin or * Copyright (c) 2003, 2004 Zultys Technologies * + * Copyright (C) 2009 Wind River Systems, Inc. + * Updated for supporting PPC405EX on Kilauea. + * Tiejun Chen + * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License * as published by the Free Software Foundation; either version @@ -659,3 +663,141 @@ void ibm405ep_fixup_clocks(unsigned int sys_clk) dt_fixup_clock("/plb/opb/serial@ef600300", uart0); dt_fixup_clock("/plb/opb/serial@ef600400", uart1); } + +static u8 ibm405ex_fwdv_multi_bits[] = { + /* values for: 1 - 16 */ + 0x01, 0x02, 0x0e, 0x09, 0x04, 0x0b, 0x10, 0x0d, 0x0c, 0x05, + 0x06, 0x0f, 0x0a, 0x07, 0x08, 0x03 +}; + +u32 ibm405ex_get_fwdva(unsigned long cpr_fwdv) +{ + u32 index; + + for (index = 0; index < ARRAY_SIZE(ibm405ex_fwdv_multi_bits); index++) + if (cpr_fwdv == (u32)ibm405ex_fwdv_multi_bits[index]) + return index + 1; + + return 0; +} + +static u8 ibm405ex_fbdv_multi_bits[] = { + /* values for: 1 - 100 */ + 0x00, 0xff, 0x7e, 0xfd, 0x7a, 0xf5, 0x6a, 0xd5, 0x2a, 0xd4, + 0x29, 0xd3, 0x26, 0xcc, 0x19, 0xb3, 0x67, 0xce, 0x1d, 0xbb, + 0x77, 0xee, 0x5d, 0xba, 0x74, 0xe9, 0x52, 0xa5, 0x4b, 0x96, + 0x2c, 0xd8, 0x31, 0xe3, 0x46, 0x8d, 0x1b, 0xb7, 0x6f, 0xde, + 0x3d, 0xfb, 0x76, 0xed, 0x5a, 0xb5, 0x6b, 0xd6, 0x2d, 0xdb, + 0x36, 0xec, 0x59, 0xb2, 0x64, 0xc9, 0x12, 0xa4, 0x48, 0x91, + 0x23, 0xc7, 0x0e, 0x9c, 0x38, 0xf0, 0x61, 0xc2, 0x05, 0x8b, + 0x17, 0xaf, 0x5f, 0xbe, 0x7c, 0xf9, 0x72, 0xe5, 0x4a, 0x95, + 0x2b, 0xd7, 0x2e, 0xdc, 0x39, 0xf3, 0x66, 0xcd, 0x1a, 0xb4, + 0x68, 0xd1, 0x22, 0xc4, 0x09, 0x93, 0x27, 0xcf, 0x1e, 0xbc, + /* values for: 101 - 200 */ + 0x78, 0xf1, 0x62, 0xc5, 0x0a, 0x94, 0x28, 0xd0, 0x21, 0xc3, + 0x06, 0x8c, 0x18, 0xb0, 0x60, 0xc1, 0x02, 0x84, 0x08, 0x90, + 0x20, 0xc0, 0x01, 0x83, 0x07, 0x8f, 0x1f, 0xbf, 0x7f, 0xfe, + 0x7d, 0xfa, 0x75, 0xea, 0x55, 0xaa, 0x54, 0xa9, 0x53, 0xa6, + 0x4c, 0x99, 0x33, 0xe7, 0x4e, 0x9d, 0x3b, 0xf7, 0x6e, 0xdd, + 0x3a, 0xf4, 0x69, 0xd2, 0x25, 0xcb, 0x16, 0xac, 0x58, 0xb1, + 0x63, 0xc6, 0x0d, 0x9b, 0x37, 0xef, 0x5e, 0xbd, 0x7b, 0xf6, + 0x6d, 0xda, 0x35, 0xeb, 0x56, 0xad, 0x5b, 0xb6, 0x6c, 0xd9, + 0x32, 0xe4, 0x49, 0x92, 0x24, 0xc8, 0x11, 0xa3, 0x47, 0x8e, + 0x1c, 0xb8, 0x70, 0xe1, 0x42, 0x85, 0x0b, 0x97, 0x2f, 0xdf, + /* values for: 201 - 255 */ + 0x3e, 0xfc, 0x79, 0xf2, 0x65, 0xca, 0x15, 0xab, 0x57, 0xae, + 0x5c, 0xb9, 0x73, 0xe6, 0x4d, 0x9a, 0x34, 0xe8, 0x51, 0xa2, + 0x44, 0x89, 0x13, 0xa7, 0x4f, 0x9e, 0x3c, 0xf8, 0x71, 0xe2, + 0x45, 0x8a, 0x14, 0xa8, 0x50, 0xa1, 0x43, 0x86, 0x0c, 0x98, + 0x30, 0xe0, 0x41, 0x82, 0x04, 0x88, 0x10, 0xa0, 0x40, 0x81, + 0x03, 0x87, 0x0f, 0x9f, 0x3f /* END */ +}; + +u32 ibm405ex_get_fbdv(unsigned long cpr_fbdv) +{ + u32 index; + + for (index = 0; index < ARRAY_SIZE(ibm405ex_fbdv_multi_bits); index++) + if (cpr_fbdv == (u32)ibm405ex_fbdv_multi_bits[index]) + return index + 1; + + return 0; +} + +void ibm405ex_fixup_clocks(unsigned int sys_clk, unsigned int uart_clk) +{ + /* PLL config */ + u32 pllc = CPR0_READ(DCRN_CPR0_PLLC); + u32 plld = CPR0_READ(DCRN_CPR0_PLLD); + u32 cpud = CPR0_READ(DCRN_CPR0_PRIMAD); + u32 plbd = CPR0_READ(DCRN_CPR0_PRIMBD); + u32 opbd = CPR0_READ(DCRN_CPR0_OPBD); + u32 perd = CPR0_READ(DCRN_CPR0_PERD); + + /* Dividers */ + u32 fbdv = ibm405ex_get_fbdv(__fix_zero((plld >> 24) & 0xff, 1)); + + u32 fwdva = ibm405ex_get_fwdva(__fix_zero((plld >> 16) & 0x0f, 1)); + + u32 cpudv0 = __fix_zero((cpud >> 24) & 7, 8); + + /* PLBDV0 is hardwared to 010. */ + u32 plbdv0 = 2; + u32 plb2xdv0 = __fix_zero((plbd >> 16) & 7, 8); + + u32 opbdv0 = __fix_zero((opbd >> 24) & 3, 4); + + u32 perdv0 = __fix_zero((perd >> 24) & 3, 4); + + /* Resulting clocks */ + u32 cpu, plb, opb, ebc, vco, tb, uart0, uart1; + + /* PLL's VCO is the source for primary forward ? */ + if (pllc & 0x40000000) { + u32 m; + + /* Feedback path */ + switch ((pllc >> 24) & 7) { + case 0: + /* PLLOUTx */ + m = fbdv; + break; + case 1: + /* CPU */ + m = fbdv * fwdva * cpudv0; + break; + case 5: + /* PERClk */ + m = fbdv * fwdva * plb2xdv0 * plbdv0 * opbdv0 * perdv0; + break; + default: + printf("WARNING ! Invalid PLL feedback source !\n"); + goto bypass; + } + + vco = (unsigned int)(sys_clk * m); + } else { +bypass: + /* Bypass system PLL */ + vco = 0; + } + + /* CPU = VCO / ( FWDVA x CPUDV0) */ + cpu = vco / (fwdva * cpudv0); + /* PLB = VCO / ( FWDVA x PLB2XDV0 x PLBDV0) */ + plb = vco / (fwdva * plb2xdv0 * plbdv0); + /* OPB = PLB / OPBDV0 */ + opb = plb / opbdv0; + /* EBC = OPB / PERDV0 */ + ebc = opb / perdv0; + + tb = cpu; + uart0 = uart1 = uart_clk; + + dt_fixup_cpu_clocks(cpu, tb, 0); + dt_fixup_clock("/plb", plb); + dt_fixup_clock("/plb/opb", opb); + dt_fixup_clock("/plb/opb/ebc", ebc); + dt_fixup_clock("/plb/opb/serial@ef600200", uart0); + dt_fixup_clock("/plb/opb/serial@ef600300", uart1); +} diff --git a/arch/powerpc/boot/4xx.h b/arch/powerpc/boot/4xx.h index 2606e64f0c4..7dc5d45361b 100644 --- a/arch/powerpc/boot/4xx.h +++ b/arch/powerpc/boot/4xx.h @@ -21,6 +21,7 @@ void ibm4xx_fixup_ebc_ranges(const char *ebc); void ibm405gp_fixup_clocks(unsigned int sys_clk, unsigned int ser_clk); void ibm405ep_fixup_clocks(unsigned int sys_clk); +void ibm405ex_fixup_clocks(unsigned int sys_clk, unsigned int uart_clk); void ibm440gp_fixup_clocks(unsigned int sys_clk, unsigned int ser_clk); void ibm440ep_fixup_clocks(unsigned int sys_clk, unsigned int ser_clk, unsigned int tmr_clk); diff --git a/arch/powerpc/boot/dcr.h b/arch/powerpc/boot/dcr.h index 95b9f534401..645a7c964e5 100644 --- a/arch/powerpc/boot/dcr.h +++ b/arch/powerpc/boot/dcr.h @@ -153,9 +153,7 @@ static const unsigned long sdram_bxcr[] = { SDRAM0_B0CR, SDRAM0_B1CR, #define DCRN_CPC0_PLLMR1 0xf4 #define DCRN_CPC0_UCR 0xf5 -/* 440GX Clock control etc */ - - +/* 440GX/405EX Clock Control reg */ #define DCRN_CPR0_CLKUPD 0x020 #define DCRN_CPR0_PLLC 0x040 #define DCRN_CPR0_PLLD 0x060 -- cgit v1.2.3-70-g09d2 From c5b20d3926dfc9616265b8ff5967cb7a476f9344 Mon Sep 17 00:00:00 2001 From: Tiejun Chen Date: Sat, 22 Aug 2009 16:03:44 +0000 Subject: powerpc/405ex: support cuImage via included dtb To support cuImage, we need to initialize the required sections and ensure that it is built. Signed-off-by: Tiejun Chen Signed-off-by: Josh Boyer --- arch/powerpc/boot/Makefile | 2 +- arch/powerpc/boot/cuboot-kilauea.c | 49 ++++++++++++++++++++++++++++++++++++++ 2 files changed, 50 insertions(+), 1 deletion(-) create mode 100644 arch/powerpc/boot/cuboot-kilauea.c (limited to 'arch') diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile index 5a109a93753..7bfc8ad8779 100644 --- a/arch/powerpc/boot/Makefile +++ b/arch/powerpc/boot/Makefile @@ -76,7 +76,7 @@ src-plat := of.c cuboot-52xx.c cuboot-824x.c cuboot-83xx.c cuboot-85xx.c holly.c cuboot-katmai.c cuboot-rainier.c redboot-8xx.c ep8248e.c \ cuboot-warp.c cuboot-85xx-cpm2.c cuboot-yosemite.c simpleboot.c \ virtex405-head.S virtex.c redboot-83xx.c cuboot-sam440ep.c \ - cuboot-acadia.c cuboot-amigaone.c + cuboot-acadia.c cuboot-amigaone.c cuboot-kilauea.c src-boot := $(src-wlib) $(src-plat) empty.c src-boot := $(addprefix $(obj)/, $(src-boot)) diff --git a/arch/powerpc/boot/cuboot-kilauea.c b/arch/powerpc/boot/cuboot-kilauea.c new file mode 100644 index 00000000000..80cdad6bbc3 --- /dev/null +++ b/arch/powerpc/boot/cuboot-kilauea.c @@ -0,0 +1,49 @@ +/* + * Old U-boot compatibility for PPC405EX. This image is already included + * a dtb. + * + * Author: Tiejun Chen + * + * Copyright (C) 2009 Wind River Systems, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include "ops.h" +#include "io.h" +#include "dcr.h" +#include "stdio.h" +#include "4xx.h" +#include "44x.h" +#include "cuboot.h" + +#define TARGET_4xx +#define TARGET_44x +#include "ppcboot.h" + +#define KILAUEA_SYS_EXT_SERIAL_CLOCK 11059200 /* ext. 11.059MHz clk */ + +static bd_t bd; + +static void kilauea_fixups(void) +{ + unsigned long sysclk = 33333333; + + ibm405ex_fixup_clocks(sysclk, KILAUEA_SYS_EXT_SERIAL_CLOCK); + dt_fixup_memory(bd.bi_memstart, bd.bi_memsize); + ibm4xx_fixup_ebc_ranges("/plb/opb/ebc"); + dt_fixup_mac_address_by_alias("ethernet0", bd.bi_enetaddr); + dt_fixup_mac_address_by_alias("ethernet1", bd.bi_enet1addr); +} + +void platform_init(unsigned long r3, unsigned long r4, unsigned long r5, + unsigned long r6, unsigned long r7) +{ + CUBOOT_INIT(); + platform_ops.fixups = kilauea_fixups; + platform_ops.exit = ibm40x_dbcr_reset; + fdt_init(_dtb_start); + serial_console_init(); +} -- cgit v1.2.3-70-g09d2 From 0ed2c722c650513ba4bce868c7a052e576c060e2 Mon Sep 17 00:00:00 2001 From: Grant Likely Date: Fri, 28 Aug 2009 08:58:16 +0000 Subject: powerpc/pci: Merge ppc32 and ppc64 versions of phb_scan() The two versions are doing almost exactly the same thing. No need to maintain them as separate files. This patch also has the side effect of making the PCI device tree scanning code available to 32 bit powerpc machines, but no board ports actually make use of this feature at this point. Signed-off-by: Grant Likely Acked-by: Kumar Gala Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/include/asm/pci.h | 2 ++ arch/powerpc/include/asm/ppc-pci.h | 1 - arch/powerpc/kernel/of_platform.c | 2 +- arch/powerpc/kernel/pci-common.c | 49 ++++++++++++++++++++++++++++++ arch/powerpc/kernel/pci_32.c | 25 ++------------- arch/powerpc/kernel/pci_64.c | 46 ++++------------------------ arch/powerpc/platforms/pseries/pci_dlpar.c | 2 +- 7 files changed, 61 insertions(+), 66 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/include/asm/pci.h b/arch/powerpc/include/asm/pci.h index b856a837b4a..7aca4839387 100644 --- a/arch/powerpc/include/asm/pci.h +++ b/arch/powerpc/include/asm/pci.h @@ -233,6 +233,8 @@ extern void pci_resource_to_user(const struct pci_dev *dev, int bar, extern void pcibios_setup_bus_devices(struct pci_bus *bus); extern void pcibios_setup_bus_self(struct pci_bus *bus); +extern void pcibios_setup_phb_io_space(struct pci_controller *hose); +extern void pcibios_scan_phb(struct pci_controller *hose, void *sysdata); #endif /* __KERNEL__ */ #endif /* __ASM_POWERPC_PCI_H */ diff --git a/arch/powerpc/include/asm/ppc-pci.h b/arch/powerpc/include/asm/ppc-pci.h index 854ab713f56..2828f9d0f66 100644 --- a/arch/powerpc/include/asm/ppc-pci.h +++ b/arch/powerpc/include/asm/ppc-pci.h @@ -39,7 +39,6 @@ void *traverse_pci_devices(struct device_node *start, traverse_func pre, extern void pci_devs_phb_init(void); extern void pci_devs_phb_init_dynamic(struct pci_controller *phb); -extern void scan_phb(struct pci_controller *hose); /* From rtas_pci.h */ extern void init_pci_config_tokens (void); diff --git a/arch/powerpc/kernel/of_platform.c b/arch/powerpc/kernel/of_platform.c index 87df428e358..1a4fc0d11a0 100644 --- a/arch/powerpc/kernel/of_platform.c +++ b/arch/powerpc/kernel/of_platform.c @@ -276,7 +276,7 @@ static int __devinit of_pci_phb_probe(struct of_device *dev, #endif /* CONFIG_EEH */ /* Scan the bus */ - scan_phb(phb); + pcibios_scan_phb(phb, dev->node); if (phb->bus == NULL) return -ENXIO; diff --git a/arch/powerpc/kernel/pci-common.c b/arch/powerpc/kernel/pci-common.c index 8f84a9a8428..e9f4840096b 100644 --- a/arch/powerpc/kernel/pci-common.c +++ b/arch/powerpc/kernel/pci-common.c @@ -1688,3 +1688,52 @@ int early_find_capability(struct pci_controller *hose, int bus, int devfn, { return pci_bus_find_capability(fake_pci_bus(hose, bus), devfn, cap); } + +/** + * pci_scan_phb - Given a pci_controller, setup and scan the PCI bus + * @hose: Pointer to the PCI host controller instance structure + * @sysdata: value to use for sysdata pointer. ppc32 and ppc64 differ here + * + * Note: the 'data' pointer is a temporary measure. As 32 and 64 bit + * pci code gets merged, this parameter should become unnecessary because + * both will use the same value. + */ +void __devinit pcibios_scan_phb(struct pci_controller *hose, void *sysdata) +{ + struct pci_bus *bus; + struct device_node *node = hose->dn; + int mode; + + pr_debug("PCI: Scanning PHB %s\n", + node ? node->full_name : ""); + + /* Create an empty bus for the toplevel */ + bus = pci_create_bus(hose->parent, hose->first_busno, hose->ops, + sysdata); + if (bus == NULL) { + pr_err("Failed to create bus for PCI domain %04x\n", + hose->global_number); + return; + } + bus->secondary = hose->first_busno; + hose->bus = bus; + + /* Get some IO space for the new PHB */ + pcibios_setup_phb_io_space(hose); + + /* Wire up PHB bus resources */ + pcibios_setup_phb_resources(hose); + + /* Get probe mode and perform scan */ + mode = PCI_PROBE_NORMAL; + if (node && ppc_md.pci_probe_mode) + mode = ppc_md.pci_probe_mode(bus); + pr_debug(" probe mode: %d\n", mode); + if (mode == PCI_PROBE_DEVTREE) { + bus->subordinate = hose->last_busno; + of_scan_bus(node, bus); + } + + if (mode == PCI_PROBE_NORMAL) + hose->last_busno = bus->subordinate = pci_scan_child_bus(bus); +} diff --git a/arch/powerpc/kernel/pci_32.c b/arch/powerpc/kernel/pci_32.c index 8cf15d961c3..c13668cf36d 100644 --- a/arch/powerpc/kernel/pci_32.c +++ b/arch/powerpc/kernel/pci_32.c @@ -354,36 +354,15 @@ pci_create_OF_bus_map(void) } } -static void __devinit pcibios_scan_phb(struct pci_controller *hose) +void __devinit pcibios_setup_phb_io_space(struct pci_controller *hose) { - struct pci_bus *bus; - struct device_node *node = hose->dn; unsigned long io_offset; struct resource *res = &hose->io_resource; - pr_debug("PCI: Scanning PHB %s\n", - node ? node->full_name : ""); - - /* Create an empty bus for the toplevel */ - bus = pci_create_bus(hose->parent, hose->first_busno, hose->ops, hose); - if (bus == NULL) { - printk(KERN_ERR "Failed to create bus for PCI domain %04x\n", - hose->global_number); - return; - } - bus->secondary = hose->first_busno; - hose->bus = bus; - /* Fixup IO space offset */ io_offset = (unsigned long)hose->io_base_virt - isa_io_base; res->start = (res->start + io_offset) & 0xffffffffu; res->end = (res->end + io_offset) & 0xffffffffu; - - /* Wire up PHB bus resources */ - pcibios_setup_phb_resources(hose); - - /* Scan children */ - hose->last_busno = bus->subordinate = pci_scan_child_bus(bus); } static int __init pcibios_init(void) @@ -401,7 +380,7 @@ static int __init pcibios_init(void) if (pci_assign_all_buses) hose->first_busno = next_busno; hose->last_busno = 0xff; - pcibios_scan_phb(hose); + pcibios_scan_phb(hose, hose); pci_bus_add_devices(hose->bus); if (pci_assign_all_buses || next_busno <= hose->last_busno) next_busno = hose->last_busno + pcibios_assign_bus_offset; diff --git a/arch/powerpc/kernel/pci_64.c b/arch/powerpc/kernel/pci_64.c index 4d5b4ced7e4..ba949a2c93a 100644 --- a/arch/powerpc/kernel/pci_64.c +++ b/arch/powerpc/kernel/pci_64.c @@ -43,45 +43,6 @@ unsigned long pci_probe_only = 1; unsigned long pci_io_base = ISA_IO_BASE; EXPORT_SYMBOL(pci_io_base); -void __devinit scan_phb(struct pci_controller *hose) -{ - struct pci_bus *bus; - struct device_node *node = hose->dn; - int mode; - - pr_debug("PCI: Scanning PHB %s\n", - node ? node->full_name : ""); - - /* Create an empty bus for the toplevel */ - bus = pci_create_bus(hose->parent, hose->first_busno, hose->ops, node); - if (bus == NULL) { - printk(KERN_ERR "Failed to create bus for PCI domain %04x\n", - hose->global_number); - return; - } - bus->secondary = hose->first_busno; - hose->bus = bus; - - /* Get some IO space for the new PHB */ - pcibios_map_io_space(bus); - - /* Wire up PHB bus resources */ - pcibios_setup_phb_resources(hose); - - /* Get probe mode and perform scan */ - mode = PCI_PROBE_NORMAL; - if (node && ppc_md.pci_probe_mode) - mode = ppc_md.pci_probe_mode(bus); - pr_debug(" probe mode: %d\n", mode); - if (mode == PCI_PROBE_DEVTREE) { - bus->subordinate = hose->last_busno; - of_scan_bus(node, bus); - } - - if (mode == PCI_PROBE_NORMAL) - hose->last_busno = bus->subordinate = pci_scan_child_bus(bus); -} - static int __init pcibios_init(void) { struct pci_controller *hose, *tmp; @@ -103,7 +64,7 @@ static int __init pcibios_init(void) /* Scan all of the recorded PCI controllers. */ list_for_each_entry_safe(hose, tmp, &hose_list, list_node) { - scan_phb(hose); + pcibios_scan_phb(hose, hose->dn); pci_bus_add_devices(hose->bus); } @@ -237,6 +198,11 @@ int __devinit pcibios_map_io_space(struct pci_bus *bus) } EXPORT_SYMBOL_GPL(pcibios_map_io_space); +void __devinit pcibios_setup_phb_io_space(struct pci_controller *hose) +{ + pcibios_map_io_space(hose->bus); +} + #define IOBASE_BRIDGE_NUMBER 0 #define IOBASE_MEMORY 1 #define IOBASE_IO 2 diff --git a/arch/powerpc/platforms/pseries/pci_dlpar.c b/arch/powerpc/platforms/pseries/pci_dlpar.c index ad152a0e394..b6fa3e4b51b 100644 --- a/arch/powerpc/platforms/pseries/pci_dlpar.c +++ b/arch/powerpc/platforms/pseries/pci_dlpar.c @@ -151,7 +151,7 @@ struct pci_controller * __devinit init_phb_dynamic(struct device_node *dn) if (dn->child) eeh_add_device_tree_early(dn); - scan_phb(phb); + pcibios_scan_phb(phb, dn); pcibios_finish_adding_to_bus(phb->bus); return phb; -- cgit v1.2.3-70-g09d2 From 46db2f86a3b2a94e0b33e0b4548fb7b7b6bdff66 Mon Sep 17 00:00:00 2001 From: Brian King Date: Fri, 28 Aug 2009 12:06:29 +0000 Subject: powerpc/pseries: Fix to handle slb resize across migration The SLB can change sizes across a live migration, which was not being handled, resulting in possible machine crashes during migration if migrating to a machine which has a smaller max SLB size than the source machine. Fix this by first reducing the SLB size to the minimum possible value, which is 32, prior to migration. Then during the device tree update which occurs after migration, we make the call to ensure the SLB gets updated. Also add the slb_size to the lparcfg output so that the migration tools can check to make sure the kernel has this capability before allowing migration in scenarios where the SLB size will change. BenH: Fixed #include -> to avoid breaking ppc32 build Signed-off-by: Brian King Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/include/asm/mmu-hash64.h | 2 ++ arch/powerpc/kernel/lparcfg.c | 3 +++ arch/powerpc/kernel/rtas.c | 7 ++++++- arch/powerpc/mm/slb.c | 16 ++++++++++++---- arch/powerpc/platforms/pseries/reconfig.c | 9 ++++++++- 5 files changed, 31 insertions(+), 6 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/include/asm/mmu-hash64.h b/arch/powerpc/include/asm/mmu-hash64.h index b537903b9fc..bebe31c2e90 100644 --- a/arch/powerpc/include/asm/mmu-hash64.h +++ b/arch/powerpc/include/asm/mmu-hash64.h @@ -41,6 +41,7 @@ extern char initial_stab[]; #define SLB_NUM_BOLTED 3 #define SLB_CACHE_ENTRIES 8 +#define SLB_MIN_SIZE 32 /* Bits in the SLB ESID word */ #define SLB_ESID_V ASM_CONST(0x0000000008000000) /* valid */ @@ -276,6 +277,7 @@ extern void slb_flush_and_rebolt(void); extern void stab_initialize(unsigned long stab); extern void slb_vmalloc_update(void); +extern void slb_set_size(u16 size); #endif /* __ASSEMBLY__ */ /* diff --git a/arch/powerpc/kernel/lparcfg.c b/arch/powerpc/kernel/lparcfg.c index 2419cc706ff..ed0ac4e4b8d 100644 --- a/arch/powerpc/kernel/lparcfg.c +++ b/arch/powerpc/kernel/lparcfg.c @@ -35,6 +35,7 @@ #include #include #include +#include #define MODULE_VERS "1.8" #define MODULE_NAME "lparcfg" @@ -537,6 +538,8 @@ static int pseries_lparcfg_data(struct seq_file *m, void *v) seq_printf(m, "shared_processor_mode=%d\n", lppaca[0].shared_proc); + seq_printf(m, "slb_size=%d\n", mmu_slb_size); + return 0; } diff --git a/arch/powerpc/kernel/rtas.c b/arch/powerpc/kernel/rtas.c index c434823b8c8..bf90361bb70 100644 --- a/arch/powerpc/kernel/rtas.c +++ b/arch/powerpc/kernel/rtas.c @@ -39,6 +39,7 @@ #include #include #include +#include struct rtas_t rtas = { .lock = __RAW_SPIN_LOCK_UNLOCKED @@ -713,6 +714,7 @@ static void rtas_percpu_suspend_me(void *info) { long rc = H_SUCCESS; unsigned long msr_save; + u16 slb_size = mmu_slb_size; int cpu; struct rtas_suspend_me_data *data = (struct rtas_suspend_me_data *)info; @@ -735,13 +737,16 @@ static void rtas_percpu_suspend_me(void *info) /* All other cpus are in H_JOIN, this cpu does * the suspend. */ + slb_set_size(SLB_MIN_SIZE); printk(KERN_DEBUG "calling ibm,suspend-me on cpu %i\n", smp_processor_id()); data->error = rtas_call(data->token, 0, 1, NULL); - if (data->error) + if (data->error) { printk(KERN_DEBUG "ibm,suspend-me returned %d\n", data->error); + slb_set_size(slb_size); + } } else { printk(KERN_ERR "H_JOIN on cpu %i failed with rc = %ld\n", smp_processor_id(), rc); diff --git a/arch/powerpc/mm/slb.c b/arch/powerpc/mm/slb.c index 07961c5c169..1d98ecc8eec 100644 --- a/arch/powerpc/mm/slb.c +++ b/arch/powerpc/mm/slb.c @@ -249,14 +249,22 @@ void switch_slb(struct task_struct *tsk, struct mm_struct *mm) static inline void patch_slb_encoding(unsigned int *insn_addr, unsigned int immed) { - /* Assume the instruction had a "0" immediate value, just - * "or" in the new value - */ - *insn_addr |= immed; + *insn_addr = (*insn_addr & 0xffff0000) | immed; flush_icache_range((unsigned long)insn_addr, 4+ (unsigned long)insn_addr); } +void slb_set_size(u16 size) +{ + extern unsigned int *slb_compare_rr_to_size; + + if (mmu_slb_size == size) + return; + + mmu_slb_size = size; + patch_slb_encoding(slb_compare_rr_to_size, mmu_slb_size); +} + void slb_initialize(void) { unsigned long linear_llp, vmalloc_llp, io_llp; diff --git a/arch/powerpc/platforms/pseries/reconfig.c b/arch/powerpc/platforms/pseries/reconfig.c index b6f1b137d42..2e2bbe120b9 100644 --- a/arch/powerpc/platforms/pseries/reconfig.c +++ b/arch/powerpc/platforms/pseries/reconfig.c @@ -20,6 +20,7 @@ #include #include #include +#include @@ -439,9 +440,15 @@ static int do_update_property(char *buf, size_t bufsize) if (!newprop) return -ENOMEM; + if (!strcmp(name, "slb-size") || !strcmp(name, "ibm,slb-size")) + slb_set_size(*(int *)value); + oldprop = of_find_property(np, name,NULL); - if (!oldprop) + if (!oldprop) { + if (strlen(name)) + return prom_add_property(np, newprop); return -ENODEV; + } rc = prom_update_property(np, newprop, oldprop); if (rc) -- cgit v1.2.3-70-g09d2 From 1d5d9527d8ed8d87beb22a4fd954366aeabd12c7 Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Tue, 1 Sep 2009 15:43:54 +0000 Subject: powerpc/book3e: Add missing page sizes Add defines for the other page sizes. Even if HW doesn't support them we made them use them for hugetlbfs support. Signed-off-by: Kumar Gala Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/include/asm/pte-book3e.h | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'arch') diff --git a/arch/powerpc/include/asm/pte-book3e.h b/arch/powerpc/include/asm/pte-book3e.h index 9800565aebb..b82b9dc91a7 100644 --- a/arch/powerpc/include/asm/pte-book3e.h +++ b/arch/powerpc/include/asm/pte-book3e.h @@ -20,9 +20,19 @@ #define _PAGE_BAP_UX 0x000080 #define _PAGE_PSIZE_MSK 0x000f00 #define _PAGE_PSIZE_4K 0x000200 +#define _PAGE_PSIZE_8K 0x000300 +#define _PAGE_PSIZE_16K 0x000400 +#define _PAGE_PSIZE_32K 0x000500 #define _PAGE_PSIZE_64K 0x000600 +#define _PAGE_PSIZE_128K 0x000700 +#define _PAGE_PSIZE_256K 0x000800 +#define _PAGE_PSIZE_512K 0x000900 #define _PAGE_PSIZE_1M 0x000a00 +#define _PAGE_PSIZE_2M 0x000b00 +#define _PAGE_PSIZE_4M 0x000c00 +#define _PAGE_PSIZE_8M 0x000d00 #define _PAGE_PSIZE_16M 0x000e00 +#define _PAGE_PSIZE_32M 0x000f00 #define _PAGE_DIRTY 0x001000 /* C: page changed */ #define _PAGE_SW0 0x002000 #define _PAGE_U3 0x004000 -- cgit v1.2.3-70-g09d2 From 76acc2c1a7a9a8c2cae7e9cf8d0a8b374a48aa94 Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Tue, 1 Sep 2009 15:48:42 +0000 Subject: powerpc/fsl-booke: Use HW PTE format if CONFIG_PTE_64BIT Switch to using the Power ISA defined PTE format when we have a 64-bit PTE. This makes the code handling between fsl-booke and book3e-64 similiar for TLB faults. Additionally this lets use take advantage of the page size encodings and full permissions that the HW PTE defines. Also defined _PMD_PRESENT, _PMD_PRESENT_MASK, and _PMD_BAD since the 32-bit ppc arch code expects them. Signed-off-by: Kumar Gala Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/include/asm/pgtable-ppc32.h | 2 ++ arch/powerpc/include/asm/pte-book3e.h | 3 +++ arch/powerpc/include/asm/pte-fsl-booke.h | 7 ------- arch/powerpc/kernel/head_fsl_booke.S | 36 ++++++++++++++++++++++---------- 4 files changed, 30 insertions(+), 18 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/include/asm/pgtable-ppc32.h b/arch/powerpc/include/asm/pgtable-ppc32.h index f2c52e25395..55646adfa84 100644 --- a/arch/powerpc/include/asm/pgtable-ppc32.h +++ b/arch/powerpc/include/asm/pgtable-ppc32.h @@ -111,6 +111,8 @@ extern int icache_44x_need_flush; #include #elif defined(CONFIG_44x) #include +#elif defined(CONFIG_FSL_BOOKE) && defined(CONFIG_PTE_64BIT) +#include #elif defined(CONFIG_FSL_BOOKE) #include #elif defined(CONFIG_8xx) diff --git a/arch/powerpc/include/asm/pte-book3e.h b/arch/powerpc/include/asm/pte-book3e.h index b82b9dc91a7..082d515930a 100644 --- a/arch/powerpc/include/asm/pte-book3e.h +++ b/arch/powerpc/include/asm/pte-book3e.h @@ -75,6 +75,9 @@ /* On 32-bit, we never clear the top part of the PTE */ #ifdef CONFIG_PPC32 #define _PTE_NONE_MASK 0xffffffff00000000ULL +#define _PMD_PRESENT 0 +#define _PMD_PRESENT_MASK (PAGE_MASK) +#define _PMD_BAD (~PAGE_MASK) #endif #endif /* __KERNEL__ */ diff --git a/arch/powerpc/include/asm/pte-fsl-booke.h b/arch/powerpc/include/asm/pte-fsl-booke.h index ce8a9e94ce7..2c12be5f677 100644 --- a/arch/powerpc/include/asm/pte-fsl-booke.h +++ b/arch/powerpc/include/asm/pte-fsl-booke.h @@ -33,13 +33,6 @@ #define _PAGE_WRITETHRU 0x00400 /* H: W bit */ #define _PAGE_SPECIAL 0x00800 /* S: Special page */ -#ifdef CONFIG_PTE_64BIT -/* ERPN in a PTE never gets cleared, ignore it */ -#define _PTE_NONE_MASK 0xffffffffffff0000ULL -/* We extend the size of the PTE flags area when using 64-bit PTEs */ -#define PTE_RPN_SHIFT (PAGE_SHIFT + 8) -#endif - #define _PMD_PRESENT 0 #define _PMD_PRESENT_MASK (PAGE_MASK) #define _PMD_BAD (~PAGE_MASK) diff --git a/arch/powerpc/kernel/head_fsl_booke.S b/arch/powerpc/kernel/head_fsl_booke.S index 2c5af525647..975788ca05d 100644 --- a/arch/powerpc/kernel/head_fsl_booke.S +++ b/arch/powerpc/kernel/head_fsl_booke.S @@ -575,7 +575,12 @@ interrupt_base: * place or can we save a couple of instructions here ? */ mfspr r12,SPRN_ESR +#ifdef CONFIG_PTE_64BIT + li r13,_PAGE_PRESENT + oris r13,r13,_PAGE_ACCESSED@h +#else li r13,_PAGE_PRESENT|_PAGE_ACCESSED +#endif rlwimi r13,r12,11,29,29 FIND_PTE @@ -643,7 +648,12 @@ interrupt_base: 4: /* Make up the required permissions */ +#ifdef CONFIG_PTE_64BIT + li r13,_PAGE_PRESENT | _PAGE_EXEC + oris r13,r13,_PAGE_ACCESSED@h +#else li r13,_PAGE_PRESENT | _PAGE_ACCESSED | _PAGE_EXEC +#endif FIND_PTE andc. r13,r13,r11 /* Check permission */ @@ -733,7 +743,7 @@ finish_tlb_load: mfspr r12, SPRN_MAS2 #ifdef CONFIG_PTE_64BIT - rlwimi r12, r11, 26, 24, 31 /* extract ...WIMGE from pte */ + rlwimi r12, r11, 32-19, 27, 31 /* extract WIMGE from pte */ #else rlwimi r12, r11, 26, 27, 31 /* extract WIMGE from pte */ #endif @@ -742,6 +752,20 @@ finish_tlb_load: #endif mtspr SPRN_MAS2, r12 +#ifdef CONFIG_PTE_64BIT + rlwinm r12, r11, 32-2, 26, 31 /* Move in perm bits */ + andi. r10, r11, _PAGE_DIRTY + bne 1f + li r10, MAS3_SW | MAS3_UW + andc r12, r12, r10 +1: rlwimi r12, r13, 20, 0, 11 /* grab RPN[32:43] */ + rlwimi r12, r11, 20, 12, 19 /* grab RPN[44:51] */ + mtspr SPRN_MAS3, r12 +BEGIN_MMU_FTR_SECTION + srwi r10, r13, 12 /* grab RPN[12:31] */ + mtspr SPRN_MAS7, r10 +END_MMU_FTR_SECTION_IFSET(MMU_FTR_BIG_PHYS) +#else li r10, (_PAGE_EXEC | _PAGE_PRESENT) rlwimi r10, r11, 31, 29, 29 /* extract _PAGE_DIRTY into SW */ and r12, r11, r10 @@ -749,16 +773,6 @@ finish_tlb_load: slwi r10, r12, 1 or r10, r10, r12 iseleq r12, r12, r10 - -#ifdef CONFIG_PTE_64BIT - rlwimi r12, r13, 24, 0, 7 /* grab RPN[32:39] */ - rlwimi r12, r11, 24, 8, 19 /* grab RPN[40:51] */ - mtspr SPRN_MAS3, r12 -BEGIN_MMU_FTR_SECTION - srwi r10, r13, 8 /* grab RPN[8:31] */ - mtspr SPRN_MAS7, r10 -END_MMU_FTR_SECTION_IFSET(MMU_FTR_BIG_PHYS) -#else rlwimi r11, r12, 0, 20, 31 /* Extract RPN from PTE and merge with perms */ mtspr SPRN_MAS3, r11 #endif -- cgit v1.2.3-70-g09d2 From cede3930f0ca6fef353fa01306c72a01420bd45e Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Mon, 31 Aug 2009 21:34:36 +0000 Subject: powerpc: Fix some late PowerMac G5 with PCIe ATI graphics A misconfiguration by the firmware of the U4 PCIe bridge on PowerMac G5 with the U4 bridge (latest generations, may also affect the iMac G5 "iSight") is causing us to re-assign the PCI BARs of the video card, which can get it out of sync with the firmware, thus breaking offb. This works around it by fixing up the bridge configuration properly at boot time. It also fixes a bug where the firmware provides us with an incorrect set of accessible regions in the device-tree. Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/platforms/powermac/pci.c | 61 +++++++++++++++++++++++++++++++++++ include/linux/pci_ids.h | 1 + 2 files changed, 62 insertions(+) (limited to 'arch') diff --git a/arch/powerpc/platforms/powermac/pci.c b/arch/powerpc/platforms/powermac/pci.c index 04cdd32624d..e81403b245b 100644 --- a/arch/powerpc/platforms/powermac/pci.c +++ b/arch/powerpc/platforms/powermac/pci.c @@ -1286,3 +1286,64 @@ static void fixup_k2_sata(struct pci_dev* dev) } DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SERVERWORKS, 0x0240, fixup_k2_sata); +/* + * On U4 (aka CPC945) the PCIe root complex "P2P" bridge resource ranges aren't + * configured by the firmware. The bridge itself seems to ignore them but it + * causes problems with Linux which then re-assigns devices below the bridge, + * thus changing addresses of those devices from what was in the device-tree, + * which sucks when those are video cards using offb + * + * We could just mark it transparent but I prefer fixing up the resources to + * properly show what's going on here, as I have some doubts about having them + * badly configured potentially being an issue for DMA. + * + * We leave PIO alone, it seems to be fine + * + * Oh and there's another funny bug. The OF properties advertize the region + * 0xf1000000..0xf1ffffff as being forwarded as memory space. But that's + * actually not true, this region is the memory mapped config space. So we + * also need to filter it out or we'll map things in the wrong place. + */ +static void fixup_u4_pcie(struct pci_dev* dev) +{ + struct pci_controller *host = pci_bus_to_host(dev->bus); + struct resource *region = NULL; + u32 reg; + int i; + + /* Only do that on PowerMac */ + if (!machine_is(powermac)) + return; + + /* Find the largest MMIO region */ + for (i = 0; i < 3; i++) { + struct resource *r = &host->mem_resources[i]; + if (!(r->flags & IORESOURCE_MEM)) + continue; + /* Skip the 0xf0xxxxxx..f2xxxxxx regions, we know they + * are reserved by HW for other things + */ + if (r->start >= 0xf0000000 && r->start < 0xf3000000) + continue; + if (!region || (r->end - r->start) > + (region->end - region->start)) + region = r; + } + /* Nothing found, bail */ + if (region == 0) + return; + + /* Print things out */ + printk(KERN_INFO "PCI: Fixup U4 PCIe bridge range: %pR\n", region); + + /* Fixup bridge config space. We know it's a Mac, resource aren't + * offset so let's just blast them as-is. We also know that they + * fit in 32 bits + */ + reg = ((region->start >> 16) & 0xfff0) | (region->end & 0xfff00000); + pci_write_config_dword(dev, PCI_MEMORY_BASE, reg); + pci_write_config_dword(dev, PCI_PREF_BASE_UPPER32, 0); + pci_write_config_dword(dev, PCI_PREF_LIMIT_UPPER32, 0); + pci_write_config_dword(dev, PCI_PREF_MEMORY_BASE, 0); +} +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_APPLE, PCI_DEVICE_ID_APPLE_U4_PCIE, fixup_u4_pcie); diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h index 73b46b6b904..c86bb6e3dfc 100644 --- a/include/linux/pci_ids.h +++ b/include/linux/pci_ids.h @@ -877,6 +877,7 @@ #define PCI_DEVICE_ID_APPLE_SH_SUNGEM 0x0051 #define PCI_DEVICE_ID_APPLE_U3L_AGP 0x0058 #define PCI_DEVICE_ID_APPLE_U3H_AGP 0x0059 +#define PCI_DEVICE_ID_APPLE_U4_PCIE 0x005b #define PCI_DEVICE_ID_APPLE_IPID2_AGP 0x0066 #define PCI_DEVICE_ID_APPLE_IPID2_ATA 0x0069 #define PCI_DEVICE_ID_APPLE_IPID2_FW 0x006a -- cgit v1.2.3-70-g09d2 From 8708d002c416b8bf87351bc626d15d7407896edb Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Thu, 10 Sep 2009 12:47:20 +0000 Subject: powerpc/irq: Improve nanodoc The OF helpers look like nanodoc but are missing the header. Fix this and a typo (s/nad/and/) while we are here. Signed-off-by: Wolfram Sang Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/include/asm/irq.h | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/include/asm/irq.h b/arch/powerpc/include/asm/irq.h index 0a5137676e1..bbcd1aaf3df 100644 --- a/arch/powerpc/include/asm/irq.h +++ b/arch/powerpc/include/asm/irq.h @@ -302,7 +302,8 @@ extern void irq_free_virt(unsigned int virq, unsigned int count); /* -- OF helpers -- */ -/* irq_create_of_mapping - Map a hardware interrupt into linux virq space +/** + * irq_create_of_mapping - Map a hardware interrupt into linux virq space * @controller: Device node of the interrupt controller * @inspec: Interrupt specifier from the device-tree * @intsize: Size of the interrupt specifier from the device-tree @@ -314,8 +315,8 @@ extern void irq_free_virt(unsigned int virq, unsigned int count); extern unsigned int irq_create_of_mapping(struct device_node *controller, u32 *intspec, unsigned int intsize); - -/* irq_of_parse_and_map - Parse nad Map an interrupt into linux virq space +/** + * irq_of_parse_and_map - Parse and Map an interrupt into linux virq space * @device: Device node of the device whose interrupt is to be mapped * @index: Index of the interrupt to map * -- cgit v1.2.3-70-g09d2 From 757cbd46d11cfa7506b7dd5dd6657ae645bf6a17 Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Tue, 8 Sep 2009 17:38:52 +0000 Subject: powerpc/85xx: Fix SMP compile error and allow NULL for smp_ops The following commit introduced a compile error since it removed the implementation of smp_85xx_basic_setup: commit 77c0a700c1c292edafa11c1e52821ce4636f81b0 Author: Benjamin Herrenschmidt Date: Fri Aug 28 14:25:04 2009 +1000 powerpc: Properly start decrementer on BookE secondary CPUs Make it so that smp_ops probe() and setup_cpu() can be set to NULL. Signed-off-by: Kumar Gala Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/smp.c | 10 +++++++--- arch/powerpc/platforms/85xx/smp.c | 10 ---------- 2 files changed, 7 insertions(+), 13 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/kernel/smp.c b/arch/powerpc/kernel/smp.c index 96f107cc016..d387b3937cc 100644 --- a/arch/powerpc/kernel/smp.c +++ b/arch/powerpc/kernel/smp.c @@ -269,7 +269,10 @@ void __init smp_prepare_cpus(unsigned int max_cpus) cpu_callin_map[boot_cpuid] = 1; if (smp_ops) - max_cpus = smp_ops->probe(); + if (smp_ops->probe) + max_cpus = smp_ops->probe(); + else + max_cpus = NR_CPUS; else max_cpus = 1; @@ -493,7 +496,8 @@ int __devinit start_secondary(void *unused) preempt_disable(); cpu_callin_map[cpu] = 1; - smp_ops->setup_cpu(cpu); + if (smp_ops->setup_cpu) + smp_ops->setup_cpu(cpu); if (smp_ops->take_timebase) smp_ops->take_timebase(); @@ -556,7 +560,7 @@ void __init smp_cpus_done(unsigned int max_cpus) old_mask = current->cpus_allowed; set_cpus_allowed(current, cpumask_of_cpu(boot_cpuid)); - if (smp_ops) + if (smp_ops && smp_ops->setup_cpu) smp_ops->setup_cpu(boot_cpuid); set_cpus_allowed(current, old_mask); diff --git a/arch/powerpc/platforms/85xx/smp.c b/arch/powerpc/platforms/85xx/smp.c index 94f901da491..04160a4cc69 100644 --- a/arch/powerpc/platforms/85xx/smp.c +++ b/arch/powerpc/platforms/85xx/smp.c @@ -88,25 +88,15 @@ struct smp_ops_t smp_85xx_ops = { .kick_cpu = smp_85xx_kick_cpu, }; -static int __init smp_dummy_probe(void) -{ - return NR_CPUS; -} - void __init mpc85xx_smp_init(void) { struct device_node *np; - smp_85xx_ops.message_pass = NULL; - np = of_find_node_by_type(NULL, "open-pic"); if (np) { smp_85xx_ops.probe = smp_mpic_probe; smp_85xx_ops.setup_cpu = smp_85xx_setup_cpu; smp_85xx_ops.message_pass = smp_mpic_message_pass; - } else { - smp_85xx_ops.probe = smp_dummy_probe; - smp_85xx_ops.setup_cpu = smp_85xx_basic_setup; } if (cpu_has_feature(CPU_FTR_DBELL)) -- cgit v1.2.3-70-g09d2 From a6dbf93a2ad853585409e715eb96dca9177e3c39 Mon Sep 17 00:00:00 2001 From: Paul Mackerras Date: Wed, 9 Sep 2009 01:26:03 +0000 Subject: powerpc: Fix bug where perf_counters breaks oprofile Currently there is a bug where if you use oprofile on a pSeries machine, then use perf_counters, then use oprofile again, oprofile will not work correctly; it will lose the PMU configuration the next time the hypervisor does a partition context switch, and thereafter won't count anything. Maynard Johnson identified the sequence causing the problem: - oprofile setup calls ppc_enable_pmcs(), which calls pseries_lpar_enable_pmcs, which tells the hypervisor that we want to use the PMU, and sets the "PMU in use" flag in the lppaca. This flag tells the hypervisor whether it needs to save and restore the PMU config. - The perf_counter code sets and clears the "PMU in use" flag directly as it context-switches the PMU between tasks, and leaves it clear when it finishes. - oprofile setup, called for a new oprofile run, calls ppc_enable_pmcs, which does nothing because it has already been called. In particular it doesn't set the "PMU in use" flag. This fixes the problem by arranging for ppc_enable_pmcs to always set the "PMU in use" flag. It makes the perf_counter code call ppc_enable_pmcs also rather than calling the lower-level function directly, and removes the setting of the "PMU in use" flag from pseries_lpar_enable_pmcs, since that is now done in its caller. This also removes the declaration of pasemi_enable_pmcs because it isn't defined anywhere. Reported-by: Maynard Johnson Signed-off-by: Paul Mackerras Cc: --- arch/powerpc/include/asm/pmc.h | 16 ++++++++++++++-- arch/powerpc/kernel/perf_counter.c | 13 +++---------- arch/powerpc/kernel/sysfs.c | 3 +++ arch/powerpc/platforms/pseries/setup.c | 4 ---- 4 files changed, 20 insertions(+), 16 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/include/asm/pmc.h b/arch/powerpc/include/asm/pmc.h index d6a616a1b3e..ccc68b50d05 100644 --- a/arch/powerpc/include/asm/pmc.h +++ b/arch/powerpc/include/asm/pmc.h @@ -27,10 +27,22 @@ extern perf_irq_t perf_irq; int reserve_pmc_hardware(perf_irq_t new_perf_irq); void release_pmc_hardware(void); +void ppc_enable_pmcs(void); #ifdef CONFIG_PPC64 -void power4_enable_pmcs(void); -void pasemi_enable_pmcs(void); +#include + +static inline void ppc_set_pmu_inuse(int inuse) +{ + get_lppaca()->pmcregs_in_use = inuse; +} + +extern void power4_enable_pmcs(void); + +#else /* CONFIG_PPC64 */ + +static inline void ppc_set_pmu_inuse(int inuse) { } + #endif #endif /* __KERNEL__ */ diff --git a/arch/powerpc/kernel/perf_counter.c b/arch/powerpc/kernel/perf_counter.c index 70e1f57f7dd..ccd6b213564 100644 --- a/arch/powerpc/kernel/perf_counter.c +++ b/arch/powerpc/kernel/perf_counter.c @@ -62,7 +62,6 @@ static inline unsigned long perf_ip_adjust(struct pt_regs *regs) { return 0; } -static inline void perf_set_pmu_inuse(int inuse) { } static inline void perf_get_data_addr(struct pt_regs *regs, u64 *addrp) { } static inline u32 perf_get_misc_flags(struct pt_regs *regs) { @@ -93,11 +92,6 @@ static inline unsigned long perf_ip_adjust(struct pt_regs *regs) return 0; } -static inline void perf_set_pmu_inuse(int inuse) -{ - get_lppaca()->pmcregs_in_use = inuse; -} - /* * The user wants a data address recorded. * If we're not doing instruction sampling, give them the SDAR @@ -531,8 +525,7 @@ void hw_perf_disable(void) * Check if we ever enabled the PMU on this cpu. */ if (!cpuhw->pmcs_enabled) { - if (ppc_md.enable_pmcs) - ppc_md.enable_pmcs(); + ppc_enable_pmcs(); cpuhw->pmcs_enabled = 1; } @@ -594,7 +587,7 @@ void hw_perf_enable(void) mtspr(SPRN_MMCRA, cpuhw->mmcr[2] & ~MMCRA_SAMPLE_ENABLE); mtspr(SPRN_MMCR1, cpuhw->mmcr[1]); if (cpuhw->n_counters == 0) - perf_set_pmu_inuse(0); + ppc_set_pmu_inuse(0); goto out_enable; } @@ -627,7 +620,7 @@ void hw_perf_enable(void) * bit set and set the hardware counters to their initial values. * Then unfreeze the counters. */ - perf_set_pmu_inuse(1); + ppc_set_pmu_inuse(1); mtspr(SPRN_MMCRA, cpuhw->mmcr[2] & ~MMCRA_SAMPLE_ENABLE); mtspr(SPRN_MMCR1, cpuhw->mmcr[1]); mtspr(SPRN_MMCR0, (cpuhw->mmcr[0] & ~(MMCR0_PMC1CE | MMCR0_PMCjCE)) diff --git a/arch/powerpc/kernel/sysfs.c b/arch/powerpc/kernel/sysfs.c index f41aec85aa4..956ab33fd73 100644 --- a/arch/powerpc/kernel/sysfs.c +++ b/arch/powerpc/kernel/sysfs.c @@ -17,6 +17,7 @@ #include #include #include +#include #include "cacheinfo.h" @@ -123,6 +124,8 @@ static DEFINE_PER_CPU(char, pmcs_enabled); void ppc_enable_pmcs(void) { + ppc_set_pmu_inuse(1); + /* Only need to enable them once */ if (__get_cpu_var(pmcs_enabled)) return; diff --git a/arch/powerpc/platforms/pseries/setup.c b/arch/powerpc/platforms/pseries/setup.c index 8d75ea21296..ca5f2e10972 100644 --- a/arch/powerpc/platforms/pseries/setup.c +++ b/arch/powerpc/platforms/pseries/setup.c @@ -223,10 +223,6 @@ static void pseries_lpar_enable_pmcs(void) set = 1UL << 63; reset = 0; plpar_hcall_norets(H_PERFMON, set, reset); - - /* instruct hypervisor to maintain PMCs */ - if (firmware_has_feature(FW_FEATURE_SPLPAR)) - get_lppaca()->pmcregs_in_use = 1; } static void __init pseries_discover_pic(void) -- cgit v1.2.3-70-g09d2 From e51ee31e8af22948dcc3b115978469b09c96c3fd Mon Sep 17 00:00:00 2001 From: Paul Mackerras Date: Wed, 9 Sep 2009 20:28:49 +0000 Subject: powerpc/perf_counters: Reduce stack usage of power_check_constraints Michael Ellerman reported stack-frame size warnings being produced for power_check_constraints(), which uses an 8*8 array of u64 and two 8*8 arrays of unsigned long, which are currently allocated on the stack, along with some other smaller variables. These arrays come to 1.5kB on 64-bit or 1kB on 32-bit, which is a bit too much for the stack. This fixes the problem by putting these arrays in the existing per-cpu cpu_hw_counters struct. This is OK because two of the call sites have interrupts disabled already; for the third call site we use get_cpu_var, which disables preemption, so we know we won't get a context switch while we're in power_check_constraints(). Note that power_check_constraints() can be called during context switch but is not called from interrupts. Reported-by: Michael Ellerman Signed-off-by: Paul Mackerras Cc: --- arch/powerpc/kernel/perf_counter.c | 55 ++++++++++++++++++++++---------------- 1 file changed, 32 insertions(+), 23 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/kernel/perf_counter.c b/arch/powerpc/kernel/perf_counter.c index ccd6b213564..7ceefaf3a7f 100644 --- a/arch/powerpc/kernel/perf_counter.c +++ b/arch/powerpc/kernel/perf_counter.c @@ -32,6 +32,9 @@ struct cpu_hw_counters { unsigned long mmcr[3]; struct perf_counter *limited_counter[MAX_LIMITED_HWCOUNTERS]; u8 limited_hwidx[MAX_LIMITED_HWCOUNTERS]; + u64 alternatives[MAX_HWCOUNTERS][MAX_EVENT_ALTERNATIVES]; + unsigned long amasks[MAX_HWCOUNTERS][MAX_EVENT_ALTERNATIVES]; + unsigned long avalues[MAX_HWCOUNTERS][MAX_EVENT_ALTERNATIVES]; }; DEFINE_PER_CPU(struct cpu_hw_counters, cpu_hw_counters); @@ -239,13 +242,11 @@ static void write_pmc(int idx, unsigned long val) * and see if any combination of alternative codes is feasible. * The feasible set is returned in event[]. */ -static int power_check_constraints(u64 event[], unsigned int cflags[], +static int power_check_constraints(struct cpu_hw_counters *cpuhw, + u64 event[], unsigned int cflags[], int n_ev) { unsigned long mask, value, nv; - u64 alternatives[MAX_HWCOUNTERS][MAX_EVENT_ALTERNATIVES]; - unsigned long amasks[MAX_HWCOUNTERS][MAX_EVENT_ALTERNATIVES]; - unsigned long avalues[MAX_HWCOUNTERS][MAX_EVENT_ALTERNATIVES]; unsigned long smasks[MAX_HWCOUNTERS], svalues[MAX_HWCOUNTERS]; int n_alt[MAX_HWCOUNTERS], choice[MAX_HWCOUNTERS]; int i, j; @@ -260,21 +261,23 @@ static int power_check_constraints(u64 event[], unsigned int cflags[], if ((cflags[i] & PPMU_LIMITED_PMC_REQD) && !ppmu->limited_pmc_event(event[i])) { ppmu->get_alternatives(event[i], cflags[i], - alternatives[i]); - event[i] = alternatives[i][0]; + cpuhw->alternatives[i]); + event[i] = cpuhw->alternatives[i][0]; } - if (ppmu->get_constraint(event[i], &amasks[i][0], - &avalues[i][0])) + if (ppmu->get_constraint(event[i], &cpuhw->amasks[i][0], + &cpuhw->avalues[i][0])) return -1; } value = mask = 0; for (i = 0; i < n_ev; ++i) { - nv = (value | avalues[i][0]) + (value & avalues[i][0] & addf); + nv = (value | cpuhw->avalues[i][0]) + + (value & cpuhw->avalues[i][0] & addf); if ((((nv + tadd) ^ value) & mask) != 0 || - (((nv + tadd) ^ avalues[i][0]) & amasks[i][0]) != 0) + (((nv + tadd) ^ cpuhw->avalues[i][0]) & + cpuhw->amasks[i][0]) != 0) break; value = nv; - mask |= amasks[i][0]; + mask |= cpuhw->amasks[i][0]; } if (i == n_ev) return 0; /* all OK */ @@ -285,10 +288,11 @@ static int power_check_constraints(u64 event[], unsigned int cflags[], for (i = 0; i < n_ev; ++i) { choice[i] = 0; n_alt[i] = ppmu->get_alternatives(event[i], cflags[i], - alternatives[i]); + cpuhw->alternatives[i]); for (j = 1; j < n_alt[i]; ++j) - ppmu->get_constraint(alternatives[i][j], - &amasks[i][j], &avalues[i][j]); + ppmu->get_constraint(cpuhw->alternatives[i][j], + &cpuhw->amasks[i][j], + &cpuhw->avalues[i][j]); } /* enumerate all possibilities and see if any will work */ @@ -307,11 +311,11 @@ static int power_check_constraints(u64 event[], unsigned int cflags[], * where k > j, will satisfy the constraints. */ while (++j < n_alt[i]) { - nv = (value | avalues[i][j]) + - (value & avalues[i][j] & addf); + nv = (value | cpuhw->avalues[i][j]) + + (value & cpuhw->avalues[i][j] & addf); if ((((nv + tadd) ^ value) & mask) == 0 && - (((nv + tadd) ^ avalues[i][j]) - & amasks[i][j]) == 0) + (((nv + tadd) ^ cpuhw->avalues[i][j]) + & cpuhw->amasks[i][j]) == 0) break; } if (j >= n_alt[i]) { @@ -333,7 +337,7 @@ static int power_check_constraints(u64 event[], unsigned int cflags[], svalues[i] = value; smasks[i] = mask; value = nv; - mask |= amasks[i][j]; + mask |= cpuhw->amasks[i][j]; ++i; j = -1; } @@ -341,7 +345,7 @@ static int power_check_constraints(u64 event[], unsigned int cflags[], /* OK, we have a feasible combination, tell the caller the solution */ for (i = 0; i < n_ev; ++i) - event[i] = alternatives[i][choice[i]]; + event[i] = cpuhw->alternatives[i][choice[i]]; return 0; } @@ -745,7 +749,7 @@ int hw_perf_group_sched_in(struct perf_counter *group_leader, return -EAGAIN; if (check_excludes(cpuhw->counter, cpuhw->flags, n0, n)) return -EAGAIN; - i = power_check_constraints(cpuhw->events, cpuhw->flags, n + n0); + i = power_check_constraints(cpuhw, cpuhw->events, cpuhw->flags, n + n0); if (i < 0) return -EAGAIN; cpuhw->n_counters = n0 + n; @@ -800,7 +804,7 @@ static int power_pmu_enable(struct perf_counter *counter) cpuhw->flags[n0] = counter->hw.counter_base; if (check_excludes(cpuhw->counter, cpuhw->flags, n0, 1)) goto out; - if (power_check_constraints(cpuhw->events, cpuhw->flags, n0 + 1)) + if (power_check_constraints(cpuhw, cpuhw->events, cpuhw->flags, n0 + 1)) goto out; counter->hw.config = cpuhw->events[n0]; @@ -1005,6 +1009,7 @@ const struct pmu *hw_perf_counter_init(struct perf_counter *counter) unsigned int cflags[MAX_HWCOUNTERS]; int n; int err; + struct cpu_hw_counters *cpuhw; if (!ppmu) return ERR_PTR(-ENXIO); @@ -1083,7 +1088,11 @@ const struct pmu *hw_perf_counter_init(struct perf_counter *counter) cflags[n] = flags; if (check_excludes(ctrs, cflags, n, 1)) return ERR_PTR(-EINVAL); - if (power_check_constraints(events, cflags, n + 1)) + + cpuhw = &get_cpu_var(cpu_hw_counters); + err = power_check_constraints(cpuhw, events, cflags, n + 1); + put_cpu_var(cpu_hw_counters); + if (err) return ERR_PTR(-EINVAL); counter->hw.config = events[n]; -- cgit v1.2.3-70-g09d2 From c6c9eacef09a94b5866b83556196440aca876702 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Tue, 8 Sep 2009 14:16:58 +0000 Subject: powerpc/booke: Don't set DABR on 64-bit BookE, use DAC1 instead Also remove a duplicate setting of it in the context switch path on BookE. Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/process.c | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c index 678ff132e8b..0a321643305 100644 --- a/arch/powerpc/kernel/process.c +++ b/arch/powerpc/kernel/process.c @@ -284,14 +284,13 @@ int set_dabr(unsigned long dabr) return ppc_md.set_dabr(dabr); /* XXX should we have a CPU_FTR_HAS_DABR ? */ -#if defined(CONFIG_PPC64) || defined(CONFIG_6xx) - mtspr(SPRN_DABR, dabr); -#endif - #if defined(CONFIG_BOOKE) mtspr(SPRN_DAC1, dabr); +#elif defined(CONFIG_PPC_BOOK3S) + mtspr(SPRN_DABR, dabr); #endif + return 0; } @@ -372,15 +371,16 @@ struct task_struct *__switch_to(struct task_struct *prev, #endif /* CONFIG_SMP */ - if (unlikely(__get_cpu_var(current_dabr) != new->thread.dabr)) - set_dabr(new->thread.dabr); - #if defined(CONFIG_BOOKE) /* If new thread DAC (HW breakpoint) is the same then leave it */ if (new->thread.dabr) set_dabr(new->thread.dabr); +#else + if (unlikely(__get_cpu_var(current_dabr) != new->thread.dabr)) + set_dabr(new->thread.dabr); #endif + new_thread = &new->thread; old_thread = ¤t->thread; -- cgit v1.2.3-70-g09d2 From 1d6ed32226326a6e6cd67cd9ee4294bcbb0c9a15 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Fri, 11 Sep 2009 15:36:09 +1000 Subject: powerpc/iseries: Fix oops reading from /proc/iSeries/mf/*/cmdline That code uses dma_mapping_error() with a NULL device, which is a bad idea :-) The proper fix might be to start using some kind of pseudo device for all these low level mappings with the hypervisor but that will be for another day. Since it directly calls into the low level iommu code, I see no problem in having it directly test against DMA_ERROR_CODE instead of using the accessors with a NULL argument for now. Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/platforms/iseries/mf.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/powerpc/platforms/iseries/mf.c b/arch/powerpc/platforms/iseries/mf.c index fef4d515051..0d9343df35b 100644 --- a/arch/powerpc/platforms/iseries/mf.c +++ b/arch/powerpc/platforms/iseries/mf.c @@ -872,7 +872,7 @@ static int proc_mf_dump_cmdline(char *page, char **start, off_t off, count = 256 - off; dma_addr = iseries_hv_map(page, off + count, DMA_FROM_DEVICE); - if (dma_mapping_error(NULL, dma_addr)) + if (dma_addr == DMA_ERROR_CODE) return -ENOMEM; memset(page, 0, off + count); memset(&vsp_cmd, 0, sizeof(vsp_cmd)); -- cgit v1.2.3-70-g09d2 From d331d8305cba713605854aab63a000fb892353a7 Mon Sep 17 00:00:00 2001 From: Martyn Welch Date: Thu, 13 Aug 2009 09:03:02 +0100 Subject: powerpc/nvram: Enable use Generic NVRAM driver for different size chips Remove the reliance on a staticly defined NVRAM size, allowing platforms to support NVRAMs with sizes differing from the standard. A fall back value is provided for platforms not supporting this extension. Signed-off-by: Martyn Welch Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/include/asm/nvram.h | 3 +++ arch/powerpc/kernel/setup_32.c | 8 ++++++++ drivers/char/generic_nvram.c | 27 ++++++++++++++++++++------- 3 files changed, 31 insertions(+), 7 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/include/asm/nvram.h b/arch/powerpc/include/asm/nvram.h index efde5ac82f7..6c587eddee5 100644 --- a/arch/powerpc/include/asm/nvram.h +++ b/arch/powerpc/include/asm/nvram.h @@ -107,6 +107,9 @@ extern void pmac_xpram_write(int xpaddr, u8 data); /* Synchronize NVRAM */ extern void nvram_sync(void); +/* Determine NVRAM size */ +extern ssize_t nvram_get_size(void); + /* Normal access to NVRAM */ extern unsigned char nvram_read_byte(int i); extern void nvram_write_byte(unsigned char c, int i); diff --git a/arch/powerpc/kernel/setup_32.c b/arch/powerpc/kernel/setup_32.c index e1e3059cf34..53bcf3d792d 100644 --- a/arch/powerpc/kernel/setup_32.c +++ b/arch/powerpc/kernel/setup_32.c @@ -210,6 +210,14 @@ void nvram_write_byte(unsigned char val, int addr) } EXPORT_SYMBOL(nvram_write_byte); +ssize_t nvram_get_size(void) +{ + if (ppc_md.nvram_size) + return ppc_md.nvram_size(); + return -1; +} +EXPORT_SYMBOL(nvram_get_size); + void nvram_sync(void) { if (ppc_md.nvram_sync) diff --git a/drivers/char/generic_nvram.c b/drivers/char/generic_nvram.c index a00869c650d..ef31738c2cb 100644 --- a/drivers/char/generic_nvram.c +++ b/drivers/char/generic_nvram.c @@ -2,7 +2,7 @@ * Generic /dev/nvram driver for architectures providing some * "generic" hooks, that is : * - * nvram_read_byte, nvram_write_byte, nvram_sync + * nvram_read_byte, nvram_write_byte, nvram_sync, nvram_get_size * * Note that an additional hook is supported for PowerMac only * for getting the nvram "partition" informations @@ -28,6 +28,8 @@ #define NVRAM_SIZE 8192 +static ssize_t nvram_len; + static loff_t nvram_llseek(struct file *file, loff_t offset, int origin) { lock_kernel(); @@ -36,7 +38,7 @@ static loff_t nvram_llseek(struct file *file, loff_t offset, int origin) offset += file->f_pos; break; case 2: - offset += NVRAM_SIZE; + offset += nvram_len; break; } if (offset < 0) { @@ -56,9 +58,9 @@ static ssize_t read_nvram(struct file *file, char __user *buf, if (!access_ok(VERIFY_WRITE, buf, count)) return -EFAULT; - if (*ppos >= NVRAM_SIZE) + if (*ppos >= nvram_len) return 0; - for (i = *ppos; count > 0 && i < NVRAM_SIZE; ++i, ++p, --count) + for (i = *ppos; count > 0 && i < nvram_len; ++i, ++p, --count) if (__put_user(nvram_read_byte(i), p)) return -EFAULT; *ppos = i; @@ -74,9 +76,9 @@ static ssize_t write_nvram(struct file *file, const char __user *buf, if (!access_ok(VERIFY_READ, buf, count)) return -EFAULT; - if (*ppos >= NVRAM_SIZE) + if (*ppos >= nvram_len) return 0; - for (i = *ppos; count > 0 && i < NVRAM_SIZE; ++i, ++p, --count) { + for (i = *ppos; count > 0 && i < nvram_len; ++i, ++p, --count) { if (__get_user(c, p)) return -EFAULT; nvram_write_byte(c, i); @@ -133,9 +135,20 @@ static struct miscdevice nvram_dev = { int __init nvram_init(void) { + int ret = 0; + printk(KERN_INFO "Generic non-volatile memory driver v%s\n", NVRAM_VERSION); - return misc_register(&nvram_dev); + ret = misc_register(&nvram_dev); + if (ret != 0) + goto out; + + nvram_len = nvram_get_size(); + if (nvram_len < 0) + nvram_len = NVRAM_SIZE; + +out: + return ret; } void __exit nvram_cleanup(void) -- cgit v1.2.3-70-g09d2