From 13be9f00c33fe69112fe6c755d6a8f3e249abbb2 Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Fri, 14 Jan 2011 14:30:03 +0100 Subject: ARM i.MX28: fix bit operation reg | (1 << clk->enable_shift) always evaluates to true. Switch it to & which makes much more sense Signed-off-by: Sascha Hauer Acked-by: Shawn Guo --- arch/arm/mach-mxs/clock-mx28.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-mxs/clock-mx28.c b/arch/arm/mach-mxs/clock-mx28.c index 56312c092a9..4146b38605d 100644 --- a/arch/arm/mach-mxs/clock-mx28.c +++ b/arch/arm/mach-mxs/clock-mx28.c @@ -355,7 +355,7 @@ static int name##_set_rate(struct clk *clk, unsigned long rate) \ } else { \ reg &= ~BM_CLKCTRL_##dr##_DIV; \ reg |= div << BP_CLKCTRL_##dr##_DIV; \ - if (reg | (1 << clk->enable_shift)) { \ + if (reg & (1 << clk->enable_shift)) { \ pr_err("%s: clock is gated\n", __func__); \ return -EINVAL; \ } \ -- cgit v1.2.3-70-g09d2 From 34d80730c30fa37740cb43bb0eec62352df3a7c6 Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Fri, 14 Jan 2011 15:23:12 +0100 Subject: ARM i.MX28: use correct register for setting the rate _CLK_SET_RATE does not only handle the cpu clock but also other clocks, so do not hardcode the HW_CLKCTRL_CPU register. Signed-off-by: Sascha Hauer Acked-by: Shawn Guo --- arch/arm/mach-mxs/clock-mx28.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-mxs/clock-mx28.c b/arch/arm/mach-mxs/clock-mx28.c index 4146b38605d..44acd9cd177 100644 --- a/arch/arm/mach-mxs/clock-mx28.c +++ b/arch/arm/mach-mxs/clock-mx28.c @@ -360,7 +360,7 @@ static int name##_set_rate(struct clk *clk, unsigned long rate) \ return -EINVAL; \ } \ } \ - __raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_CPU); \ + __raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_##dr); \ \ for (i = 10000; i; i--) \ if (!(__raw_readl(CLKCTRL_BASE_ADDR + \ -- cgit v1.2.3-70-g09d2 From 5080e9c981473cd3e5d1571ff8d6dc39ba2777b1 Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Thu, 20 Jan 2011 16:58:50 +0100 Subject: ARM i.MX23/28: remove secondary field from struct clk. It's unused Signed-off-by: Sascha Hauer Acked-by: Shawn Guo --- arch/arm/mach-mxs/clock.c | 2 -- arch/arm/mach-mxs/include/mach/clock.h | 2 -- 2 files changed, 4 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-mxs/clock.c b/arch/arm/mach-mxs/clock.c index e7d2269cf70..a7093c88e6a 100644 --- a/arch/arm/mach-mxs/clock.c +++ b/arch/arm/mach-mxs/clock.c @@ -57,7 +57,6 @@ static void __clk_disable(struct clk *clk) if (clk->disable) clk->disable(clk); __clk_disable(clk->parent); - __clk_disable(clk->secondary); } } @@ -68,7 +67,6 @@ static int __clk_enable(struct clk *clk) if (clk->usecount++ == 0) { __clk_enable(clk->parent); - __clk_enable(clk->secondary); if (clk->enable) clk->enable(clk); diff --git a/arch/arm/mach-mxs/include/mach/clock.h b/arch/arm/mach-mxs/include/mach/clock.h index 041e276d8a3..592c9ab5d76 100644 --- a/arch/arm/mach-mxs/include/mach/clock.h +++ b/arch/arm/mach-mxs/include/mach/clock.h @@ -29,8 +29,6 @@ struct clk { int id; /* Source clock this clk depends on */ struct clk *parent; - /* Secondary clock to enable/disable with this clock */ - struct clk *secondary; /* Reference count of clock enable/disable */ __s8 usecount; /* Register bit position for clock's enable/disable control. */ -- cgit v1.2.3-70-g09d2 From 71b71518c7b97bae7317b452bf7fba067e38030a Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Mon, 24 Jan 2011 08:26:33 +0100 Subject: ARM i.MX23: use correct register for setting the rate Signed-off-by: Sascha Hauer Acked-by: Shawn Guo --- arch/arm/mach-mxs/clock-mx23.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-mxs/clock-mx23.c b/arch/arm/mach-mxs/clock-mx23.c index b1a362ebfde..72069243aec 100644 --- a/arch/arm/mach-mxs/clock-mx23.c +++ b/arch/arm/mach-mxs/clock-mx23.c @@ -304,7 +304,7 @@ static int name##_set_rate(struct clk *clk, unsigned long rate) \ reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_##dr); \ reg &= ~BM_CLKCTRL_##dr##_DIV; \ reg |= div << BP_CLKCTRL_##dr##_DIV; \ - if (reg | (1 << clk->enable_shift)) { \ + if (reg & (1 << clk->enable_shift)) { \ pr_err("%s: clock is gated\n", __func__); \ return -EINVAL; \ } \ -- cgit v1.2.3-70-g09d2 From c6e7695de8cad32be412d9e08a15d368ffe12aa6 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Fri, 21 Jan 2011 16:03:57 -0200 Subject: ARM: imx: Add VPR200 and MX51_3DS entries to uncompress.h MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Fabio Estevam Tested-by: Marc Reilly Acked-by: Uwe Kleine-König Signed-off-by: Sascha Hauer --- arch/arm/plat-mxc/include/mach/uncompress.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch') diff --git a/arch/arm/plat-mxc/include/mach/uncompress.h b/arch/arm/plat-mxc/include/mach/uncompress.h index 3a70ebf0477..ff469c4f1d7 100644 --- a/arch/arm/plat-mxc/include/mach/uncompress.h +++ b/arch/arm/plat-mxc/include/mach/uncompress.h @@ -95,6 +95,7 @@ static __inline__ void __arch_decomp_setup(unsigned long arch_id) case MACH_TYPE_MX35_3DS: case MACH_TYPE_PCM043: case MACH_TYPE_LILLY1131: + case MACH_TYPE_VPR200: uart_base = MX3X_UART1_BASE_ADDR; break; case MACH_TYPE_MAGX_ZN5: @@ -102,6 +103,7 @@ static __inline__ void __arch_decomp_setup(unsigned long arch_id) break; case MACH_TYPE_MX51_BABBAGE: case MACH_TYPE_EUKREA_CPUIMX51SD: + case MACH_TYPE_MX51_3DS: uart_base = MX51_UART1_BASE_ADDR; break; case MACH_TYPE_MX50_RDP: -- cgit v1.2.3-70-g09d2 From 5f804df3cca990bc2f0bd1f126c134af1d2a3ca2 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Sat, 22 Jan 2011 16:18:56 -0200 Subject: ARM: mach-imx/mach-mx25_3ds: Fix section type MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Fabio Estevam Acked-by: Uwe Kleine-König Signed-off-by: Sascha Hauer --- arch/arm/mach-imx/mach-mx25_3ds.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-imx/mach-mx25_3ds.c b/arch/arm/mach-imx/mach-mx25_3ds.c index aa76cfd9f34..8382e790207 100644 --- a/arch/arm/mach-imx/mach-mx25_3ds.c +++ b/arch/arm/mach-imx/mach-mx25_3ds.c @@ -180,7 +180,7 @@ static const uint32_t mx25pdk_keymap[] = { KEY(3, 3, KEY_POWER), }; -static const struct matrix_keymap_data mx25pdk_keymap_data __initdata = { +static const struct matrix_keymap_data mx25pdk_keymap_data __initconst = { .keymap = mx25pdk_keymap, .keymap_size = ARRAY_SIZE(mx25pdk_keymap), }; -- cgit v1.2.3-70-g09d2 From 28693ec01d0229b9e2a2ebe38ef8faa5e151b440 Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Mon, 24 Jan 2011 20:55:22 +0100 Subject: OMAP: PM: SmartReflex: Add missing IS_ERR test Function _sr_lookup, defined in the same file, returns ERR_PTR not NULL in an error case. The semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // @r@ identifier f; @@ f(...) { ... return ERR_PTR(...); } @@ identifier r.f, fld; expression x; statement S1,S2; @@ x = f(...) ... when != IS_ERR(x) ( if (IS_ERR(x) ||...) S1 else S2 | *x->fld ) // Signed-off-by: Julia Lawall Signed-off-by: Kevin Hilman --- arch/arm/mach-omap2/smartreflex.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/smartreflex.c b/arch/arm/mach-omap2/smartreflex.c index 77ecebf3fae..d7deadfaddb 100644 --- a/arch/arm/mach-omap2/smartreflex.c +++ b/arch/arm/mach-omap2/smartreflex.c @@ -966,7 +966,7 @@ static int __devexit omap_sr_remove(struct platform_device *pdev) } sr_info = _sr_lookup(pdata->voltdm); - if (!sr_info) { + if (IS_ERR(sr_info)) { dev_warn(&pdev->dev, "%s: omap_sr struct not found\n", __func__); return -EINVAL; -- cgit v1.2.3-70-g09d2 From 1f6b5dd41f3b38739f0275b1539c57b34c5b22a3 Mon Sep 17 00:00:00 2001 From: Uwe Kleine-König Date: Tue, 25 Jan 2011 16:54:22 +0100 Subject: ARM: mxs: acknowledge gpio irq MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This fixes a machine hang after a gpio irq triggered. Signed-off-by: Uwe Kleine-König Signed-off-by: Sascha Hauer --- arch/arm/mach-mxs/gpio.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-mxs/gpio.c b/arch/arm/mach-mxs/gpio.c index d7ad7a61366..cb0c0e83a52 100644 --- a/arch/arm/mach-mxs/gpio.c +++ b/arch/arm/mach-mxs/gpio.c @@ -139,6 +139,8 @@ static void mxs_gpio_irq_handler(u32 irq, struct irq_desc *desc) struct mxs_gpio_port *port = (struct mxs_gpio_port *)get_irq_data(irq); u32 gpio_irq_no_base = port->virtual_irq_start; + desc->irq_data.chip->irq_ack(&desc->irq_data); + irq_stat = __raw_readl(port->base + PINCTRL_IRQSTAT(port->id)) & __raw_readl(port->base + PINCTRL_IRQEN(port->id)); -- cgit v1.2.3-70-g09d2 From d14dd7e20d5e526557f5d3cfef4046a642f80924 Mon Sep 17 00:00:00 2001 From: Ari Kauppi Date: Thu, 20 Jan 2011 13:57:19 -0500 Subject: ARM: oprofile: Fix backtraces in timer mode Always allow backtraces when using oprofile on ARM, even if a PMU isn't present. Restores functionality originally introduced in commit 1b7b56982fdcd9d85effd76f3928cf5d6eb26155 ("oprofile: Always allow backtraces on ARM") by Richard Purdie. It is not that obvious, but there is now only one oprofile_arch_init() function. So the .backtrace callback is available also in timer mode. Implemented by removing code and using stubs for oprofile_perf_{init, exit} provided by . This allows cleaning of other architecture specific implementations too. Cc: stable@kernel.org # 37.x Signed-off-by: Ari Kauppi Acked-by: Will Deacon Signed-off-by: Robert Richter --- arch/arm/oprofile/common.c | 12 ++---------- include/linux/oprofile.h | 9 +++++++++ 2 files changed, 11 insertions(+), 10 deletions(-) (limited to 'arch') diff --git a/arch/arm/oprofile/common.c b/arch/arm/oprofile/common.c index 8aa974491df..2b663918c46 100644 --- a/arch/arm/oprofile/common.c +++ b/arch/arm/oprofile/common.c @@ -10,8 +10,6 @@ */ #include -#include -#include #include #include #include @@ -46,6 +44,7 @@ char *op_name_from_perf_id(void) return NULL; } } +#endif static int report_trace(struct stackframe *frame, void *d) { @@ -111,6 +110,7 @@ static void arm_backtrace(struct pt_regs * const regs, unsigned int depth) int __init oprofile_arch_init(struct oprofile_operations *ops) { + /* provide backtrace support also in timer mode: */ ops->backtrace = arm_backtrace; return oprofile_perf_init(ops); @@ -120,11 +120,3 @@ void __exit oprofile_arch_exit(void) { oprofile_perf_exit(); } -#else -int __init oprofile_arch_init(struct oprofile_operations *ops) -{ - pr_info("oprofile: hardware counters not available\n"); - return -ENODEV; -} -void __exit oprofile_arch_exit(void) {} -#endif /* CONFIG_HW_PERF_EVENTS */ diff --git a/include/linux/oprofile.h b/include/linux/oprofile.h index 54c83827f91..1ca64113efe 100644 --- a/include/linux/oprofile.h +++ b/include/linux/oprofile.h @@ -16,6 +16,8 @@ #include #include #include +#include +#include #include /* Each escaped entry is prefixed by ESCAPE_CODE @@ -190,6 +192,13 @@ int oprofile_write_commit(struct op_entry *entry); int __init oprofile_perf_init(struct oprofile_operations *ops); void oprofile_perf_exit(void); char *op_name_from_perf_id(void); +#else +static inline int __init oprofile_perf_init(struct oprofile_operations *ops) +{ + pr_info("oprofile: hardware counters not available\n"); + return -ENODEV; +} +static inline void oprofile_perf_exit(void) { } #endif /* CONFIG_HW_PERF_EVENTS */ #endif /* OPROFILE_H */ -- cgit v1.2.3-70-g09d2 From 617fcc98020bbc9492cacdef40423b758c02a9df Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Tue, 25 Jan 2011 16:40:01 -0800 Subject: OMAP3: PM: fix save secure RAM to restore MPU power state Currently, on HS/EMU devices, MPU power state forced to on during PM init by the save secure RAM code. Rather than forcing the state of MPU powerdomain to on, simply read the current value and restore it after the ROM code has run. This only affects the !CPUidle case since when CPUidle is enabled, the MPU power state is dynamically changed by CPUidle. In the !CPUidle case, MPU power state is initialized once at init and never touched. Acked-by: Tero Kristo Signed-off-by: Kevin Hilman --- arch/arm/mach-omap2/pm34xx.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c index 8cbbeade4b8..1916038b267 100644 --- a/arch/arm/mach-omap2/pm34xx.c +++ b/arch/arm/mach-omap2/pm34xx.c @@ -168,9 +168,10 @@ static void omap3_core_restore_context(void) * once during boot sequence, but this works as we are not using secure * services. */ -static void omap3_save_secure_ram_context(u32 target_mpu_state) +static void omap3_save_secure_ram_context(void) { u32 ret; + int mpu_next_state = pwrdm_read_next_pwrst(mpu_pwrdm); if (omap_type() != OMAP2_DEVICE_TYPE_GP) { /* @@ -181,7 +182,7 @@ static void omap3_save_secure_ram_context(u32 target_mpu_state) pwrdm_set_next_pwrst(mpu_pwrdm, PWRDM_POWER_ON); ret = _omap_save_secure_sram((u32 *) __pa(omap3_secure_ram_storage)); - pwrdm_set_next_pwrst(mpu_pwrdm, target_mpu_state); + pwrdm_set_next_pwrst(mpu_pwrdm, mpu_next_state); /* Following is for error tracking, it should not happen */ if (ret) { printk(KERN_ERR "save_secure_sram() returns %08x\n", @@ -1094,7 +1095,7 @@ static int __init omap3_pm_init(void) local_fiq_disable(); omap_dma_global_context_save(); - omap3_save_secure_ram_context(PWRDM_POWER_ON); + omap3_save_secure_ram_context(); omap_dma_global_context_restore(); local_irq_enable(); -- cgit v1.2.3-70-g09d2 From d038b12c6d773a4b9f69ca5243773bf6314f7ee9 Mon Sep 17 00:00:00 2001 From: Stephane Eranian Date: Tue, 25 Jan 2011 17:32:01 +0200 Subject: perf: Fix Pentium4 raw event validation This patch fixes some issues with raw event validation on Pentium 4 (Netburst) based processors. As I was testing libpfm4 Netburst support, I ran into two problems in the p4_validate_raw_event() function: - the shared field must be checked ONLY when HT is on - the binding to ESCR register was missing The second item was causing raw events to not be encoded correctly compared to generic PMU events. With this patch, I can now pass Netburst events to libpfm4 examples and get meaningful results: $ task -e global_power_events:running:u noploop 1 noploop for 1 seconds 3,206,304,898 global_power_events:running Signed-off-by: Stephane Eranian Acked-by: Cyrill Gorcunov Cc: peterz@infradead.org Cc: paulus@samba.org Cc: davem@davemloft.net Cc: fweisbec@gmail.com Cc: perfmon2-devel@lists.sf.net Cc: eranian@gmail.com Cc: robert.richter@amd.com Cc: acme@redhat.com Cc: gorcunov@gmail.com Cc: ming.m.lin@intel.com LKML-Reference: <4d3efb2f.1252d80a.1a80.ffffc83f@mx.google.com> Signed-off-by: Ingo Molnar --- arch/x86/kernel/cpu/perf_event_p4.c | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/cpu/perf_event_p4.c b/arch/x86/kernel/cpu/perf_event_p4.c index e56b9bfbabd..f7a0993c1e7 100644 --- a/arch/x86/kernel/cpu/perf_event_p4.c +++ b/arch/x86/kernel/cpu/perf_event_p4.c @@ -682,7 +682,7 @@ static int p4_validate_raw_event(struct perf_event *event) * if an event is shared accross the logical threads * the user needs special permissions to be able to use it */ - if (p4_event_bind_map[v].shared) { + if (p4_ht_active() && p4_event_bind_map[v].shared) { if (perf_paranoid_cpu() && !capable(CAP_SYS_ADMIN)) return -EACCES; } @@ -727,7 +727,8 @@ static int p4_hw_config(struct perf_event *event) event->hw.config = p4_set_ht_bit(event->hw.config); if (event->attr.type == PERF_TYPE_RAW) { - + struct p4_event_bind *bind; + unsigned int esel; /* * Clear bits we reserve to be managed by kernel itself * and never allowed from a user space @@ -743,6 +744,13 @@ static int p4_hw_config(struct perf_event *event) * bits since we keep additional info here (for cache events and etc) */ event->hw.config |= event->attr.config; + bind = p4_config_get_bind(event->attr.config); + if (!bind) { + rc = -EINVAL; + goto out; + } + esel = P4_OPCODE_ESEL(bind->opcode); + event->hw.config |= p4_config_pack_cccr(P4_CCCR_ESEL(esel)); } rc = x86_setup_perfctr(event); -- cgit v1.2.3-70-g09d2 From 026a2078791b64aede220b1b1a3e4dfe4ab175e7 Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Wed, 26 Jan 2011 13:41:05 +0100 Subject: microblaze: Fix DTB passing from bootloader Little endian system needs to check OF_DT_HEADER but it is swapped because it is in big-endian. Microblaze LE provides lwr instruction which loads magic number in BIG endian format which can be compared. There is used the fact that if you write 0x1 as word and load it as byte then you get for big-endian zero and 1 for little-endian. Signed-off-by: Michal Simek --- arch/microblaze/kernel/head.S | 14 ++++++++++++-- 1 file changed, 12 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/microblaze/kernel/head.S b/arch/microblaze/kernel/head.S index 42434008209..0db20b5abb5 100644 --- a/arch/microblaze/kernel/head.S +++ b/arch/microblaze/kernel/head.S @@ -77,8 +77,18 @@ real_start: We ensure r7 points to a valid FDT, just in case the bootloader is broken or non-existent */ beqi r7, no_fdt_arg /* NULL pointer? don't copy */ - lw r11, r0, r7 /* Does r7 point to a */ - rsubi r11, r11, OF_DT_HEADER /* valid FDT? */ +/* Does r7 point to a valid FDT? Load HEADER magic number */ + /* Run time Big/Little endian platform */ + /* Save 1 as word and load byte - 0 - BIG, 1 - LITTLE */ + addik r11, r0, 0x1 /* BIG/LITTLE checking value */ + /* __bss_start will be zeroed later - it is just temp location */ + swi r11, r0, TOPHYS(__bss_start) + lbui r11, r0, TOPHYS(__bss_start) + beqid r11, big_endian /* DO NOT break delay stop dependency */ + lw r11, r0, r7 /* Big endian load in delay slot */ + lwr r11, r0, r7 /* Little endian load */ +big_endian: + rsubi r11, r11, OF_DT_HEADER /* Check FDT header */ beqi r11, _prepare_copy_fdt or r7, r0, r0 /* clear R7 when not valid DTB */ bnei r11, no_fdt_arg /* No - get out of here */ -- cgit v1.2.3-70-g09d2 From 9c749e177ccc0b3ee9589425c7255079e7a726fc Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Fri, 28 Jan 2011 13:14:58 +0100 Subject: microblaze: Fix unaligned issue on MMU system with BS=0 DIV=1 Unaligned code use shift for finding register operand. There is used BSRLI(r8,r8,2) macro which is expand for BS=0, DIV=1 by ori rD, r0, (1 << imm); \ idivu rD, rD, rA but if rD is equal rA then ori instruction rewrite value which should be devide. The patch remove this macro which use idivu instruction because idivu takes 32/34 cycles. The highest shifting is 20 which takes 20 cycles. Signed-off-by: Michal Simek --- arch/microblaze/kernel/hw_exception_handler.S | 4 ---- 1 file changed, 4 deletions(-) (limited to 'arch') diff --git a/arch/microblaze/kernel/hw_exception_handler.S b/arch/microblaze/kernel/hw_exception_handler.S index 25f6e07d8de..782680de312 100644 --- a/arch/microblaze/kernel/hw_exception_handler.S +++ b/arch/microblaze/kernel/hw_exception_handler.S @@ -147,10 +147,6 @@ #if CONFIG_XILINX_MICROBLAZE0_USE_BARREL > 0 #define BSRLI(rD, rA, imm) \ bsrli rD, rA, imm - #elif CONFIG_XILINX_MICROBLAZE0_USE_DIV > 0 - #define BSRLI(rD, rA, imm) \ - ori rD, r0, (1 << imm); \ - idivu rD, rD, rA #else #define BSRLI(rD, rA, imm) BSRLI ## imm (rD, rA) /* Only the used shift constants defined here - add more if needed */ -- cgit v1.2.3-70-g09d2 From de93c3c119382cb888ca8a94b642dbcf8035525e Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Fri, 28 Jan 2011 13:26:54 +0100 Subject: microblaze: Fix ASM optimized code for LE Microblaze little-endian doesn't support ASM optimized library functions(memcpy/memmove). Kconfig doens't contain any information about endian that's why it is necessary to check it in the source code. The code is used with barrel shifter is used. Signed-off-by: Michal Simek --- arch/microblaze/lib/fastcopy.S | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'arch') diff --git a/arch/microblaze/lib/fastcopy.S b/arch/microblaze/lib/fastcopy.S index fdc48bb065d..62021d7e249 100644 --- a/arch/microblaze/lib/fastcopy.S +++ b/arch/microblaze/lib/fastcopy.S @@ -29,6 +29,10 @@ * between mem locations with size of xfer spec'd in bytes */ +#ifdef __MICROBLAZEEL__ +#error Microblaze LE not support ASM optimized lib func. Disable OPT_LIB_ASM. +#endif + #include .text .globl memcpy -- cgit v1.2.3-70-g09d2 From f1be77bb21120b5306b56d6854db1f8eb5c3678b Mon Sep 17 00:00:00 2001 From: Martin Schwidefsky Date: Mon, 31 Jan 2011 11:30:04 +0100 Subject: [S390] pgtable_list corruption After page_table_free_rcu removed a page from the pgtable_list page_table_free better not add it again. Otherwise a page_table_alloc can reuse a page table fragment that is still in the rcu process. Signed-off-by: Martin Schwidefsky --- arch/s390/mm/pgtable.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/s390/mm/pgtable.c b/arch/s390/mm/pgtable.c index 0c719c61972..e1850c28cd6 100644 --- a/arch/s390/mm/pgtable.c +++ b/arch/s390/mm/pgtable.c @@ -336,7 +336,8 @@ void page_table_free(struct mm_struct *mm, unsigned long *table) page->flags ^= bits; if (page->flags & FRAG_MASK) { /* Page now has some free pgtable fragments. */ - list_move(&page->lru, &mm->context.pgtable_list); + if (!list_empty(&page->lru)) + list_move(&page->lru, &mm->context.pgtable_list); page = NULL; } else /* All fragments of the 4K page have been freed. */ -- cgit v1.2.3-70-g09d2 From e4d82692f4513ccf78de548b8ecea58adf03fa9a Mon Sep 17 00:00:00 2001 From: Martin Schwidefsky Date: Mon, 31 Jan 2011 11:30:05 +0100 Subject: [S390] missing sacf in uaccess The uaccess functions copy_in_user_std and clear_user_std fail to switch back from secondary space mode to primary space mode with sacf in case of an unresolvable page fault. We need to make sure that the switch back to primary mode is done in all cases, otherwise the code following the uaccess inline assembly will crash. Reported-by: Alexander Graf Signed-off-by: Martin Schwidefsky --- arch/s390/lib/uaccess_std.c | 10 ++++------ 1 file changed, 4 insertions(+), 6 deletions(-) (limited to 'arch') diff --git a/arch/s390/lib/uaccess_std.c b/arch/s390/lib/uaccess_std.c index 07deaeee14c..a6c4f7ed24a 100644 --- a/arch/s390/lib/uaccess_std.c +++ b/arch/s390/lib/uaccess_std.c @@ -125,9 +125,9 @@ static size_t copy_in_user_std(size_t size, void __user *to, unsigned long tmp1; asm volatile( + " sacf 256\n" " "AHI" %0,-1\n" " jo 5f\n" - " sacf 256\n" " bras %3,3f\n" "0:"AHI" %0,257\n" "1: mvc 0(1,%1),0(%2)\n" @@ -142,9 +142,8 @@ static size_t copy_in_user_std(size_t size, void __user *to, "3:"AHI" %0,-256\n" " jnm 2b\n" "4: ex %0,1b-0b(%3)\n" - " sacf 0\n" "5: "SLR" %0,%0\n" - "6:\n" + "6: sacf 0\n" EX_TABLE(1b,6b) EX_TABLE(2b,0b) EX_TABLE(4b,0b) : "+a" (size), "+a" (to), "+a" (from), "=a" (tmp1) : : "cc", "memory"); @@ -156,9 +155,9 @@ static size_t clear_user_std(size_t size, void __user *to) unsigned long tmp1, tmp2; asm volatile( + " sacf 256\n" " "AHI" %0,-1\n" " jo 5f\n" - " sacf 256\n" " bras %3,3f\n" " xc 0(1,%1),0(%1)\n" "0:"AHI" %0,257\n" @@ -178,9 +177,8 @@ static size_t clear_user_std(size_t size, void __user *to) "3:"AHI" %0,-256\n" " jnm 2b\n" "4: ex %0,0(%3)\n" - " sacf 0\n" "5: "SLR" %0,%0\n" - "6:\n" + "6: sacf 0\n" EX_TABLE(1b,6b) EX_TABLE(2b,0b) EX_TABLE(4b,0b) : "+a" (size), "+a" (to), "=a" (tmp1), "=a" (tmp2) : : "cc", "memory"); -- cgit v1.2.3-70-g09d2 From c84ca00819e8a441d79c61883a275d8982f04cb2 Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Mon, 31 Jan 2011 11:30:06 +0100 Subject: [S390] tlb: fix build error caused by THP Fix this build error with !CONFIG_SWAP caused by tranparent huge pages support: In file included from mm/pgtable-generic.c:9:0: /linux-2.6/arch/s390/include/asm/tlb.h: In function 'tlb_remove_page': /linux-2.6/arch/s390/include/asm/tlb.h:92:2: error: implicit declaration of function 'page_cache_release' Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky --- arch/s390/include/asm/tlb.h | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/s390/include/asm/tlb.h b/arch/s390/include/asm/tlb.h index f1f644f2240..9074a54c4d1 100644 --- a/arch/s390/include/asm/tlb.h +++ b/arch/s390/include/asm/tlb.h @@ -22,6 +22,7 @@ */ #include +#include #include #include #include -- cgit v1.2.3-70-g09d2 From 786cca889264836fad841757a1bf1bbaa7a16010 Mon Sep 17 00:00:00 2001 From: Akinobu Mita Date: Mon, 31 Jan 2011 11:30:07 +0100 Subject: [S390] use asm-generic/cacheflush.h The implementation of the cache flushing interfaces on the s390 is identical with the default implementation in asm-generic. Signed-off-by: Akinobu Mita Signed-off-by: Martin Schwidefsky --- arch/s390/include/asm/cacheflush.h | 23 +---------------------- 1 file changed, 1 insertion(+), 22 deletions(-) (limited to 'arch') diff --git a/arch/s390/include/asm/cacheflush.h b/arch/s390/include/asm/cacheflush.h index 405cc97c624..7e1f7762062 100644 --- a/arch/s390/include/asm/cacheflush.h +++ b/arch/s390/include/asm/cacheflush.h @@ -1,29 +1,8 @@ #ifndef _S390_CACHEFLUSH_H #define _S390_CACHEFLUSH_H -/* Keep includes the same across arches. */ -#include - /* Caches aren't brain-dead on the s390. */ -#define flush_cache_all() do { } while (0) -#define flush_cache_mm(mm) do { } while (0) -#define flush_cache_dup_mm(mm) do { } while (0) -#define flush_cache_range(vma, start, end) do { } while (0) -#define flush_cache_page(vma, vmaddr, pfn) do { } while (0) -#define ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE 0 -#define flush_dcache_page(page) do { } while (0) -#define flush_dcache_mmap_lock(mapping) do { } while (0) -#define flush_dcache_mmap_unlock(mapping) do { } while (0) -#define flush_icache_range(start, end) do { } while (0) -#define flush_icache_page(vma,pg) do { } while (0) -#define flush_icache_user_range(vma,pg,adr,len) do { } while (0) -#define flush_cache_vmap(start, end) do { } while (0) -#define flush_cache_vunmap(start, end) do { } while (0) - -#define copy_to_user_page(vma, page, vaddr, dst, src, len) \ - memcpy(dst, src, len) -#define copy_from_user_page(vma, page, vaddr, dst, src, len) \ - memcpy(dst, src, len) +#include #ifdef CONFIG_DEBUG_PAGEALLOC void kernel_map_pages(struct page *page, int numpages, int enable); -- cgit v1.2.3-70-g09d2 From d9c11b1e8aade25d7d75fb8f344e68e1301822e4 Mon Sep 17 00:00:00 2001 From: Sebastian Ott Date: Mon, 31 Jan 2011 11:30:09 +0100 Subject: [S390] reset default for CONFIG_CHSC_SCH 6f9a3c33 "[S390] cleanup s390 Kconfig" accidentally changed the default for CONFIG_CHSC_SCH. Reset it to m. Signed-off-by: Sebastian Ott Signed-off-by: Martin Schwidefsky --- arch/s390/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig index ff19efdf6fe..636bcb81d06 100644 --- a/arch/s390/Kconfig +++ b/arch/s390/Kconfig @@ -406,7 +406,7 @@ config QDIO If unsure, say Y. config CHSC_SCH - def_tristate y + def_tristate m prompt "Support for CHSC subchannels" help This driver allows usage of CHSC subchannels. A CHSC subchannel -- cgit v1.2.3-70-g09d2 From 62270119867131d6d11fe018f1fafcf0fa2933e3 Mon Sep 17 00:00:00 2001 From: Aaro Koskinen Date: Fri, 28 Jan 2011 18:24:11 +0200 Subject: arm: mach-omap2: voltage: debugfs: fix memory leak The temporary string holding the directory name to be created should be released. Signed-off-by: Aaro Koskinen Signed-off-by: Kevin Hilman --- arch/arm/mach-omap2/voltage.c | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/arm/mach-omap2/voltage.c b/arch/arm/mach-omap2/voltage.c index ed6079c94c5..12be525b8df 100644 --- a/arch/arm/mach-omap2/voltage.c +++ b/arch/arm/mach-omap2/voltage.c @@ -471,6 +471,7 @@ static void __init vdd_debugfs_init(struct omap_vdd_info *vdd) strcat(name, vdd->voltdm.name); vdd->debug_dir = debugfs_create_dir(name, voltage_dir); + kfree(name); if (IS_ERR(vdd->debug_dir)) { pr_warning("%s: Unable to create debugfs directory for" " vdd_%s\n", __func__, vdd->voltdm.name); -- cgit v1.2.3-70-g09d2 From 720bc782249015a30438516cee5c4be180a3f675 Mon Sep 17 00:00:00 2001 From: Stefan Weil Date: Sun, 30 Jan 2011 20:26:27 +0100 Subject: OMAP: PM: SmartReflex: Fix possible memory leak sr_info was allocated and needs a kfree before returning. This error was reported by cppcheck: arch/arm/mach-omap2/smartreflex.c:837: error: Memory leak: sr_info To: Tony Lindgren Cc: Russell King Cc: linux-omap@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Stefan Weil Acked-by: Shweta Gulati Signed-off-by: Kevin Hilman --- arch/arm/mach-omap2/smartreflex.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/smartreflex.c b/arch/arm/mach-omap2/smartreflex.c index d7deadfaddb..5f429b96fc9 100644 --- a/arch/arm/mach-omap2/smartreflex.c +++ b/arch/arm/mach-omap2/smartreflex.c @@ -834,7 +834,8 @@ static int __init omap_sr_probe(struct platform_device *pdev) if (!pdata) { dev_err(&pdev->dev, "%s: platform data missing\n", __func__); - return -EINVAL; + ret = -EINVAL; + goto err_free_devinfo; } mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); -- cgit v1.2.3-70-g09d2 From 8353584eae4af8f37e5a23b63ed816c79185a9c9 Mon Sep 17 00:00:00 2001 From: Stefan Weil Date: Sun, 30 Jan 2011 20:29:38 +0100 Subject: OMAP: PM: SmartReflex: Fix possible null pointer read access These errors were found by cppcheck: arch/arm/mach-omap2/smartreflex.c:784: error: Possible null pointer dereference: sr_info arch/arm/mach-omap2/smartreflex.c:799: error: Possible null pointer dereference: sr_info Both conditional statements are executed when sr_info == NULL, so accessing sr_info->voltdm would fail. Cc: Russell King Cc: linux-omap@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Stefan Weil Signed-off-by: Kevin Hilman --- arch/arm/mach-omap2/smartreflex.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/smartreflex.c b/arch/arm/mach-omap2/smartreflex.c index 5f429b96fc9..c37e823266d 100644 --- a/arch/arm/mach-omap2/smartreflex.c +++ b/arch/arm/mach-omap2/smartreflex.c @@ -780,8 +780,7 @@ static int omap_sr_autocomp_show(void *data, u64 *val) struct omap_sr *sr_info = (struct omap_sr *) data; if (!sr_info) { - pr_warning("%s: omap_sr struct for sr_%s not found\n", - __func__, sr_info->voltdm->name); + pr_warning("%s: omap_sr struct not found\n", __func__); return -EINVAL; } @@ -795,8 +794,7 @@ static int omap_sr_autocomp_store(void *data, u64 val) struct omap_sr *sr_info = (struct omap_sr *) data; if (!sr_info) { - pr_warning("%s: omap_sr struct for sr_%s not found\n", - __func__, sr_info->voltdm->name); + pr_warning("%s: omap_sr struct not found\n", __func__); return -EINVAL; } -- cgit v1.2.3-70-g09d2 From 303783aac812020d1a8b5152f44639d528870317 Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Thu, 27 Jan 2011 06:26:36 +0800 Subject: ARM: mxs: fix clock base address missing Signed-off-by: Shawn Guo Signed-off-by: Sascha Hauer --- arch/arm/mach-mxs/clock-mx23.c | 2 +- arch/arm/mach-mxs/clock-mx28.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-mxs/clock-mx23.c b/arch/arm/mach-mxs/clock-mx23.c index 72069243aec..ca72a05ed9c 100644 --- a/arch/arm/mach-mxs/clock-mx23.c +++ b/arch/arm/mach-mxs/clock-mx23.c @@ -347,7 +347,7 @@ static int name##_set_parent(struct clk *clk, struct clk *parent) \ { \ if (parent != clk->parent) { \ __raw_writel(BM_CLKCTRL_CLKSEQ_BYPASS_##bit, \ - HW_CLKCTRL_CLKSEQ_TOG); \ + CLKCTRL_BASE_ADDR + HW_CLKCTRL_CLKSEQ_TOG); \ clk->parent = parent; \ } \ \ diff --git a/arch/arm/mach-mxs/clock-mx28.c b/arch/arm/mach-mxs/clock-mx28.c index 44acd9cd177..bf30d2b66d8 100644 --- a/arch/arm/mach-mxs/clock-mx28.c +++ b/arch/arm/mach-mxs/clock-mx28.c @@ -483,7 +483,7 @@ static int name##_set_parent(struct clk *clk, struct clk *parent) \ { \ if (parent != clk->parent) { \ __raw_writel(BM_CLKCTRL_CLKSEQ_BYPASS_##bit, \ - HW_CLKCTRL_CLKSEQ_TOG); \ + CLKCTRL_BASE_ADDR + HW_CLKCTRL_CLKSEQ_TOG); \ clk->parent = parent; \ } \ \ -- cgit v1.2.3-70-g09d2 From 014aaf6b15842eec03162c0026ec533b4b738126 Mon Sep 17 00:00:00 2001 From: Uwe Kleine-König Date: Thu, 27 Jan 2011 11:28:34 +0100 Subject: ARM: mxs/imx28: remove now unused clock lookup "fec.0" MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Commit b2878fa (ARM: mx28: update clock and device name for dual fec support) added only the new lookups without removing the old one. Cc: Shawn Guo Signed-off-by: Uwe Kleine-König Acked-by: Shawn Guo Signed-off-by: Sascha Hauer --- arch/arm/mach-mxs/clock-mx28.c | 1 - 1 file changed, 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-mxs/clock-mx28.c b/arch/arm/mach-mxs/clock-mx28.c index bf30d2b66d8..fd1c4c54b8e 100644 --- a/arch/arm/mach-mxs/clock-mx28.c +++ b/arch/arm/mach-mxs/clock-mx28.c @@ -609,7 +609,6 @@ static struct clk_lookup lookups[] = { _REGISTER_CLOCK("duart", NULL, uart_clk) _REGISTER_CLOCK("imx28-fec.0", NULL, fec_clk) _REGISTER_CLOCK("imx28-fec.1", NULL, fec_clk) - _REGISTER_CLOCK("fec.0", NULL, fec_clk) _REGISTER_CLOCK("rtc", NULL, rtc_clk) _REGISTER_CLOCK("pll2", NULL, pll2_clk) _REGISTER_CLOCK(NULL, "hclk", hbus_clk) -- cgit v1.2.3-70-g09d2 From 2492218c63dca0fb4f041bdc366d243ae3426b40 Mon Sep 17 00:00:00 2001 From: Daniel Hellstrom Date: Tue, 1 Feb 2011 12:39:59 -0800 Subject: sparc32: unaligned memory access (MNA) trap handler bug Since commit f0e98c387e61de00646be31fab4c2fa0224e1efb ("[SPARC]: Fix link errors with gcc-4.3") the MNA trap handler does not emulate stores to unaligned addresses correctly. MNA operation from both kernel and user space are affected. A typical effect of this bug is nr_frags in skbs are overwritten during buffer copying/checksum-calculation, or maximally 6 bytes of data in the network buffer will be overwitten with garbage. Signed-off-by: Daniel Hellstrom Signed-off-by: David S. Miller --- arch/sparc/kernel/una_asm_32.S | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/sparc/kernel/una_asm_32.S b/arch/sparc/kernel/una_asm_32.S index 8cc03458eb7..8f096e84a93 100644 --- a/arch/sparc/kernel/una_asm_32.S +++ b/arch/sparc/kernel/una_asm_32.S @@ -24,9 +24,9 @@ retl_efault: .globl __do_int_store __do_int_store: ld [%o2], %g1 - cmp %1, 2 + cmp %o1, 2 be 2f - cmp %1, 4 + cmp %o1, 4 be 1f srl %g1, 24, %g2 srl %g1, 16, %g7 -- cgit v1.2.3-70-g09d2 From 713f25cec6331fca414aefb2ab5b20d88c610a2f Mon Sep 17 00:00:00 2001 From: Aaro Koskinen Date: Tue, 1 Feb 2011 15:36:28 +0000 Subject: arm: mach-omap2: board-rm680: fix rm680_vemmc regulator constraints With the commit 757902513019e6ee469791ff76f954b19ca8d036 (regulator: Factor out voltage set operation into a separate function) fixed voltage regulator setup will fail if there are voltage constraints defined. This made MMC unusable on this board. Fix by just deleting those redundant constraints. Signed-off-by: Aaro Koskinen Reviewed-by: Jarkko Nikula [tony@atomide.com: updated comments] Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/board-rm680.c | 3 --- 1 file changed, 3 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/board-rm680.c b/arch/arm/mach-omap2/board-rm680.c index cb77be7ac44..39a71bb8a30 100644 --- a/arch/arm/mach-omap2/board-rm680.c +++ b/arch/arm/mach-omap2/board-rm680.c @@ -40,9 +40,6 @@ static struct regulator_consumer_supply rm680_vemmc_consumers[] = { static struct regulator_init_data rm680_vemmc = { .constraints = { .name = "rm680_vemmc", - .min_uV = 2900000, - .max_uV = 2900000, - .apply_uV = 1, .valid_modes_mask = REGULATOR_MODE_NORMAL | REGULATOR_MODE_STANDBY, .valid_ops_mask = REGULATOR_CHANGE_STATUS -- cgit v1.2.3-70-g09d2 From 9d47e309015b8d5ab32851cd0216e4b96b6407e4 Mon Sep 17 00:00:00 2001 From: Aaro Koskinen Date: Fri, 28 Jan 2011 14:50:55 +0000 Subject: arm: mach-omap2: mux: free allocated memory on error exit Free allocated memory on error exit. Signed-off-by: Aaro Koskinen Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/mux.c | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c index fae49d12bc7..98148b6c36e 100644 --- a/arch/arm/mach-omap2/mux.c +++ b/arch/arm/mach-omap2/mux.c @@ -1000,6 +1000,7 @@ int __init omap_mux_init(const char *name, u32 flags, if (!partition->base) { pr_err("%s: Could not ioremap mux partition at 0x%08x\n", __func__, partition->phys); + kfree(partition); return -ENODEV; } -- cgit v1.2.3-70-g09d2 From 190910cb82669980edff7432be9542d4bec91adb Mon Sep 17 00:00:00 2001 From: Huang Weiyi Date: Fri, 28 Jan 2011 14:04:38 +0000 Subject: omap1: remove duplicated #include Remove duplicated #include('s) in arch/arm/mach-omap1/time.c Signed-off-by: Huang Weiyi Signed-off-by: Tony Lindgren --- arch/arm/mach-omap1/time.c | 1 - 1 file changed, 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-omap1/time.c b/arch/arm/mach-omap1/time.c index f83fc335c61..6885d2fac18 100644 --- a/arch/arm/mach-omap1/time.c +++ b/arch/arm/mach-omap1/time.c @@ -44,7 +44,6 @@ #include #include #include -#include #include #include -- cgit v1.2.3-70-g09d2 From daf7aabcc14b3d63d8f134ca181e8b66f047e2d6 Mon Sep 17 00:00:00 2001 From: Thomas Weber Date: Thu, 20 Jan 2011 15:41:48 +0000 Subject: OMAP3: Devkit8000: Change lcd power pin This patch fixes a wrongly used lcd enable pin. The Devkit8000 uses twl4030_ledA configured as output gpio only for the lcd enable line. twl4030_gpio.1 is used through the generic gpio functions while ledA is used via low level twl4030 calls. This patch removes the low level calls and use the generic gpio functions for initialization and use of ledA. This patch also fixes a bug where the lcd would not power down when blanking. Further this patch fixes an indentation issue. The comment line uses eight whitespace and is replaced with a hard tab. gpio_request + gpio_direction_output are replaced with gpio_request_one. The return value of gpio_request_one is used to set the value of the gpio to -EINVAL when unsuccessful, so that gpio_is_valid can detect the unsuccessful request. But already successful requested gpios are not freed. Reported-by: Daniel Morsing Signed-off-by: Thomas Weber Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/board-devkit8000.c | 27 ++++++++++++++++----------- 1 file changed, 16 insertions(+), 11 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c index e906e05bb41..9a2a31e011c 100644 --- a/arch/arm/mach-omap2/board-devkit8000.c +++ b/arch/arm/mach-omap2/board-devkit8000.c @@ -115,9 +115,6 @@ static struct omap2_hsmmc_info mmc[] = { static int devkit8000_panel_enable_lcd(struct omap_dss_device *dssdev) { - twl_i2c_write_u8(TWL4030_MODULE_GPIO, 0x80, REG_GPIODATADIR1); - twl_i2c_write_u8(TWL4030_MODULE_LED, 0x0, 0x0); - if (gpio_is_valid(dssdev->reset_gpio)) gpio_set_value_cansleep(dssdev->reset_gpio, 1); return 0; @@ -247,6 +244,8 @@ static struct gpio_led gpio_leds[]; static int devkit8000_twl_gpio_setup(struct device *dev, unsigned gpio, unsigned ngpio) { + int ret; + omap_mux_init_gpio(29, OMAP_PIN_INPUT); /* gpio + 0 is "mmc0_cd" (input/IRQ) */ mmc[0].gpio_cd = gpio + 0; @@ -255,17 +254,23 @@ static int devkit8000_twl_gpio_setup(struct device *dev, /* TWL4030_GPIO_MAX + 1 == ledB, PMU_STAT (out, active low LED) */ gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1; - /* gpio + 1 is "LCD_PWREN" (out, active high) */ - devkit8000_lcd_device.reset_gpio = gpio + 1; - gpio_request(devkit8000_lcd_device.reset_gpio, "LCD_PWREN"); - /* Disable until needed */ - gpio_direction_output(devkit8000_lcd_device.reset_gpio, 0); + /* TWL4030_GPIO_MAX + 0 is "LCD_PWREN" (out, active high) */ + devkit8000_lcd_device.reset_gpio = gpio + TWL4030_GPIO_MAX + 0; + ret = gpio_request_one(devkit8000_lcd_device.reset_gpio, + GPIOF_DIR_OUT | GPIOF_INIT_LOW, "LCD_PWREN"); + if (ret < 0) { + devkit8000_lcd_device.reset_gpio = -EINVAL; + printk(KERN_ERR "Failed to request GPIO for LCD_PWRN\n"); + } /* gpio + 7 is "DVI_PD" (out, active low) */ devkit8000_dvi_device.reset_gpio = gpio + 7; - gpio_request(devkit8000_dvi_device.reset_gpio, "DVI PowerDown"); - /* Disable until needed */ - gpio_direction_output(devkit8000_dvi_device.reset_gpio, 0); + ret = gpio_request_one(devkit8000_dvi_device.reset_gpio, + GPIOF_DIR_OUT | GPIOF_INIT_LOW, "DVI PowerDown"); + if (ret < 0) { + devkit8000_dvi_device.reset_gpio = -EINVAL; + printk(KERN_ERR "Failed to request GPIO for DVI PowerDown\n"); + } return 0; } -- cgit v1.2.3-70-g09d2 From 719078a6bff1cabdbca8d404fb73bcaed1d0fc81 Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Wed, 2 Feb 2011 12:13:50 -0800 Subject: OMAP1: Fix non-working LCD on OMAP310 This patch fixes bug introduced in revision: f8e9e98454606e43b728269de21db349f57861c7 omap1: DMA: move LCD related code from plat-omap to mach-omap1 The code introduced by this patch didn't consider any other CPUs but OMAP1510, which rendered OMAP310 -- which has the same LCD controller -- non-working. Use cpu_is_omap15xx() instead of cpu_is_omap1510() to squash this issue. Bug found on Palm Zire 71 hardware. Signed-off-by: Marek Vasut Signed-off-by: Tony Lindgren --- arch/arm/mach-omap1/lcd_dma.c | 24 ++++++++++++------------ 1 file changed, 12 insertions(+), 12 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap1/lcd_dma.c b/arch/arm/mach-omap1/lcd_dma.c index c9088d85da0..453809359ba 100644 --- a/arch/arm/mach-omap1/lcd_dma.c +++ b/arch/arm/mach-omap1/lcd_dma.c @@ -37,7 +37,7 @@ int omap_lcd_dma_running(void) * On OMAP1510, internal LCD controller will start the transfer * when it gets enabled, so assume DMA running if LCD enabled. */ - if (cpu_is_omap1510()) + if (cpu_is_omap15xx()) if (omap_readw(OMAP_LCDC_CONTROL) & OMAP_LCDC_CTRL_LCD_EN) return 1; @@ -95,7 +95,7 @@ EXPORT_SYMBOL(omap_set_lcd_dma_single_transfer); void omap_set_lcd_dma_b1_rotation(int rotate) { - if (cpu_is_omap1510()) { + if (cpu_is_omap15xx()) { printk(KERN_ERR "DMA rotation is not supported in 1510 mode\n"); BUG(); return; @@ -106,7 +106,7 @@ EXPORT_SYMBOL(omap_set_lcd_dma_b1_rotation); void omap_set_lcd_dma_b1_mirror(int mirror) { - if (cpu_is_omap1510()) { + if (cpu_is_omap15xx()) { printk(KERN_ERR "DMA mirror is not supported in 1510 mode\n"); BUG(); } @@ -116,7 +116,7 @@ EXPORT_SYMBOL(omap_set_lcd_dma_b1_mirror); void omap_set_lcd_dma_b1_vxres(unsigned long vxres) { - if (cpu_is_omap1510()) { + if (cpu_is_omap15xx()) { printk(KERN_ERR "DMA virtual resulotion is not supported " "in 1510 mode\n"); BUG(); @@ -127,7 +127,7 @@ EXPORT_SYMBOL(omap_set_lcd_dma_b1_vxres); void omap_set_lcd_dma_b1_scale(unsigned int xscale, unsigned int yscale) { - if (cpu_is_omap1510()) { + if (cpu_is_omap15xx()) { printk(KERN_ERR "DMA scale is not supported in 1510 mode\n"); BUG(); } @@ -177,7 +177,7 @@ static void set_b1_regs(void) bottom = PIXADDR(lcd_dma.xres - 1, lcd_dma.yres - 1); /* 1510 DMA requires the bottom address to be 2 more * than the actual last memory access location. */ - if (cpu_is_omap1510() && + if (cpu_is_omap15xx() && lcd_dma.data_type == OMAP_DMA_DATA_TYPE_S32) bottom += 2; ei = PIXSTEP(0, 0, 1, 0); @@ -241,7 +241,7 @@ static void set_b1_regs(void) return; /* Suppress warning about uninitialized vars */ } - if (cpu_is_omap1510()) { + if (cpu_is_omap15xx()) { omap_writew(top >> 16, OMAP1510_DMA_LCD_TOP_F1_U); omap_writew(top, OMAP1510_DMA_LCD_TOP_F1_L); omap_writew(bottom >> 16, OMAP1510_DMA_LCD_BOT_F1_U); @@ -343,7 +343,7 @@ void omap_free_lcd_dma(void) BUG(); return; } - if (!cpu_is_omap1510()) + if (!cpu_is_omap15xx()) omap_writew(omap_readw(OMAP1610_DMA_LCD_CCR) & ~1, OMAP1610_DMA_LCD_CCR); lcd_dma.reserved = 0; @@ -360,7 +360,7 @@ void omap_enable_lcd_dma(void) * connected. Otherwise the OMAP internal controller will * start the transfer when it gets enabled. */ - if (cpu_is_omap1510() || !lcd_dma.ext_ctrl) + if (cpu_is_omap15xx() || !lcd_dma.ext_ctrl) return; w = omap_readw(OMAP1610_DMA_LCD_CTRL); @@ -378,14 +378,14 @@ EXPORT_SYMBOL(omap_enable_lcd_dma); void omap_setup_lcd_dma(void) { BUG_ON(lcd_dma.active); - if (!cpu_is_omap1510()) { + if (!cpu_is_omap15xx()) { /* Set some reasonable defaults */ omap_writew(0x5440, OMAP1610_DMA_LCD_CCR); omap_writew(0x9102, OMAP1610_DMA_LCD_CSDP); omap_writew(0x0004, OMAP1610_DMA_LCD_LCH_CTRL); } set_b1_regs(); - if (!cpu_is_omap1510()) { + if (!cpu_is_omap15xx()) { u16 w; w = omap_readw(OMAP1610_DMA_LCD_CCR); @@ -407,7 +407,7 @@ void omap_stop_lcd_dma(void) u16 w; lcd_dma.active = 0; - if (cpu_is_omap1510() || !lcd_dma.ext_ctrl) + if (cpu_is_omap15xx() || !lcd_dma.ext_ctrl) return; w = omap_readw(OMAP1610_DMA_LCD_CCR); -- cgit v1.2.3-70-g09d2 From ed2af92bc3adf7f5c09edef64cf4383b3d60b070 Mon Sep 17 00:00:00 2001 From: Ming Lei Date: Wed, 5 Jan 2011 14:03:21 +0000 Subject: arm: omap4: panda: remove usb_nop_xceiv_register(v1) Panda uses both twl6030 otg phy(vbus, id) and internal phy(data lines, DP/DM), so removes usb_nop_xceiv_register to make twl6030 otg driver working since current otg code only supports one global transceiver. Otherwise, musb doesn't work without the remove. Reviewd-by: Felipe Balbi Signed-off-by: Ming Lei Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/board-omap4panda.c | 2 -- 1 file changed, 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c index e001a048dc0..e944025d5ef 100644 --- a/arch/arm/mach-omap2/board-omap4panda.c +++ b/arch/arm/mach-omap2/board-omap4panda.c @@ -409,8 +409,6 @@ static void __init omap4_panda_init(void) platform_add_devices(panda_devices, ARRAY_SIZE(panda_devices)); omap_serial_init(); omap4_twl6030_hsmmc_init(mmc); - /* OMAP4 Panda uses internal transceiver so register nop transceiver */ - usb_nop_xceiv_register(); omap4_ehci_init(); usb_musb_init(&musb_board_data); } -- cgit v1.2.3-70-g09d2 From f12d3d04e8f6223276abb068c5d72852174b8c31 Mon Sep 17 00:00:00 2001 From: Matthieu CASTET Date: Thu, 20 Jan 2011 21:11:45 +0100 Subject: x86, nx: Don't force pages RW when setting NX bits Xen want page table pages read only. But the initial page table (from head_*.S) live in .data or .bss. That was broken by 64edc8ed5ffae999d8d413ba006850e9e34166cb. There is absolutely no reason to force these pages RW after they have already been marked RO. Signed-off-by: Matthieu CASTET Tested-by: Konrad Rzeszutek Wilk Signed-off-by: H. Peter Anvin --- arch/x86/mm/pageattr.c | 8 -------- 1 file changed, 8 deletions(-) (limited to 'arch') diff --git a/arch/x86/mm/pageattr.c b/arch/x86/mm/pageattr.c index 8b830ca14ac..d343b3c81f3 100644 --- a/arch/x86/mm/pageattr.c +++ b/arch/x86/mm/pageattr.c @@ -256,7 +256,6 @@ static inline pgprot_t static_protections(pgprot_t prot, unsigned long address, unsigned long pfn) { pgprot_t forbidden = __pgprot(0); - pgprot_t required = __pgprot(0); /* * The BIOS area between 640k and 1Mb needs to be executable for @@ -282,12 +281,6 @@ static inline pgprot_t static_protections(pgprot_t prot, unsigned long address, if (within(pfn, __pa((unsigned long)__start_rodata) >> PAGE_SHIFT, __pa((unsigned long)__end_rodata) >> PAGE_SHIFT)) pgprot_val(forbidden) |= _PAGE_RW; - /* - * .data and .bss should always be writable. - */ - if (within(address, (unsigned long)_sdata, (unsigned long)_edata) || - within(address, (unsigned long)__bss_start, (unsigned long)__bss_stop)) - pgprot_val(required) |= _PAGE_RW; #if defined(CONFIG_X86_64) && defined(CONFIG_DEBUG_RODATA) /* @@ -327,7 +320,6 @@ static inline pgprot_t static_protections(pgprot_t prot, unsigned long address, #endif prot = __pgprot(pgprot_val(prot) & ~pgprot_val(forbidden)); - prot = __pgprot(pgprot_val(prot) | pgprot_val(required)); return prot; } -- cgit v1.2.3-70-g09d2 From f7448548a9f32db38f243ccd4271617758ddfe2c Mon Sep 17 00:00:00 2001 From: Suresh Siddha Date: Wed, 2 Feb 2011 17:02:55 -0800 Subject: x86, mtrr: Avoid MTRR reprogramming on BP during boot on UP platforms Markus Kohn ran into a hard hang regression on an acer aspire 1310, when acpi is enabled. git bisect showed the following commit as the bad one that introduced the boot regression. commit d0af9eed5aa91b6b7b5049cae69e5ea956fd85c3 Author: Suresh Siddha Date: Wed Aug 19 18:05:36 2009 -0700 x86, pat/mtrr: Rendezvous all the cpus for MTRR/PAT init Because of the UP configuration of that platform, native_smp_prepare_cpus() bailed out (in smp_sanity_check()) before doing the set_mtrr_aps_delayed_init() Further down the boot path, native_smp_cpus_done() will call the delayed MTRR initialization for the AP's (mtrr_aps_init()) with mtrr_aps_delayed_init not set. This resulted in the boot processor reprogramming its MTRR's to the values seen during the start of the OS boot. While this is not needed ideally, this shouldn't have caused any side-effects. This is because the reprogramming of MTRR's (set_mtrr_state() that gets called via set_mtrr()) will check if the live register contents are different from what is being asked to write and will do the actual write only if they are different. BP's mtrr state is read during the start of the OS boot and typically nothing would have changed when we ask to reprogram it on BP again because of the above scenario on an UP platform. So on a normal UP platform no reprogramming of BP MTRR MSR's happens and all is well. However, on this platform, bios seems to be modifying the fixed mtrr range registers between the start of OS boot and when we double check the live registers for reprogramming BP MTRR registers. And as the live registers are modified, we end up reprogramming the MTRR's to the state seen during the start of the OS boot. During ACPI initialization, something in the bios (probably smi handler?) don't like this fact and results in a hard lockup. We didn't see this boot hang issue on this platform before the commit d0af9eed5aa91b6b7b5049cae69e5ea956fd85c3, because only the AP's (if any) will program its MTRR's to the value that BP had at the start of the OS boot. Fix this issue by checking mtrr_aps_delayed_init before continuing further in the mtrr_aps_init(). Now, only AP's (if any) will program its MTRR's to the BP values during boot. Addresses https://bugzilla.novell.com/show_bug.cgi?id=623393 [ By the way, this behavior of the bios modifying MTRR's after the start of the OS boot is not common and the kernel is not prepared to handle this situation well. Irrespective of this issue, during suspend/resume, linux kernel will try to reprogram the BP's MTRR values to the values seen during the start of the OS boot. So suspend/resume might be already broken on this platform for all linux kernel versions. ] Reported-and-bisected-by: Markus Kohn Tested-by: Markus Kohn Signed-off-by: Suresh Siddha Cc: Thomas Renninger Cc: Rafael Wysocki Cc: Venkatesh Pallipadi Cc: stable@kernel.org # [v2.6.32+] LKML-Reference: <1296694975.4418.402.camel@sbsiddha-MOBL3.sc.intel.com> Signed-off-by: Ingo Molnar --- arch/x86/kernel/cpu/mtrr/main.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/x86/kernel/cpu/mtrr/main.c b/arch/x86/kernel/cpu/mtrr/main.c index 01c0f3ee6cc..bebabec5b44 100644 --- a/arch/x86/kernel/cpu/mtrr/main.c +++ b/arch/x86/kernel/cpu/mtrr/main.c @@ -793,13 +793,21 @@ void set_mtrr_aps_delayed_init(void) } /* - * MTRR initialization for all AP's + * Delayed MTRR initialization for all AP's */ void mtrr_aps_init(void) { if (!use_intel()) return; + /* + * Check if someone has requested the delay of AP MTRR initialization, + * by doing set_mtrr_aps_delayed_init(), prior to this point. If not, + * then we are done. + */ + if (!mtrr_aps_delayed_init) + return; + set_mtrr(~0U, 0, 0, 0); mtrr_aps_delayed_init = false; } -- cgit v1.2.3-70-g09d2 From 831d52bc153971b70e64eccfbed2b232394f22f8 Mon Sep 17 00:00:00 2001 From: Suresh Siddha Date: Thu, 3 Feb 2011 12:20:04 -0800 Subject: x86, mm: avoid possible bogus tlb entries by clearing prev mm_cpumask after switching mm Clearing the cpu in prev's mm_cpumask early will avoid the flush tlb IPI's while the cr3 is still pointing to the prev mm. And this window can lead to the possibility of bogus TLB fills resulting in strange failures. One such problematic scenario is mentioned below. T1. CPU-1 is context switching from mm1 to mm2 context and got a NMI etc between the point of clearing the cpu from the mm_cpumask(mm1) and before reloading the cr3 with the new mm2. T2. CPU-2 is tearing down a specific vma for mm1 and will proceed with flushing the TLB for mm1. It doesn't send the flush TLB to CPU-1 as it doesn't see that cpu listed in the mm_cpumask(mm1). T3. After the TLB flush is complete, CPU-2 goes ahead and frees the page-table pages associated with the removed vma mapping. T4. CPU-2 now allocates those freed page-table pages for something else. T5. As the CR3 and TLB caches for mm1 is still active on CPU-1, CPU-1 can potentially speculate and walk through the page-table caches and can insert new TLB entries. As the page-table pages are already freed and being used on CPU-2, this page walk can potentially insert a bogus global TLB entry depending on the (random) contents of the page that is being used on CPU-2. T6. This bogus TLB entry being global will be active across future CR3 changes and can result in weird memory corruption etc. To avoid this issue, for the prev mm that is handing over the cpu to another mm, clear the cpu from the mm_cpumask(prev) after the cr3 is changed. Marking it for -stable, though we haven't seen any reported failure that can be attributed to this. Signed-off-by: Suresh Siddha Acked-by: Ingo Molnar Cc: stable@kernel.org [v2.6.32+] Signed-off-by: Linus Torvalds --- arch/x86/include/asm/mmu_context.h | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/x86/include/asm/mmu_context.h b/arch/x86/include/asm/mmu_context.h index 4a2d4e0c18d..8b5393ec108 100644 --- a/arch/x86/include/asm/mmu_context.h +++ b/arch/x86/include/asm/mmu_context.h @@ -36,8 +36,6 @@ static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next, unsigned cpu = smp_processor_id(); if (likely(prev != next)) { - /* stop flush ipis for the previous mm */ - cpumask_clear_cpu(cpu, mm_cpumask(prev)); #ifdef CONFIG_SMP percpu_write(cpu_tlbstate.state, TLBSTATE_OK); percpu_write(cpu_tlbstate.active_mm, next); @@ -47,6 +45,9 @@ static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next, /* Re-load page tables */ load_cr3(next->pgd); + /* stop flush ipis for the previous mm */ + cpumask_clear_cpu(cpu, mm_cpumask(prev)); + /* * load the LDT, if the LDT is different: */ -- cgit v1.2.3-70-g09d2 From 0f66e50af53d39edebf4bc64ef90077e738c171f Mon Sep 17 00:00:00 2001 From: Sonic Zhang Date: Tue, 11 Jan 2011 00:16:43 -0500 Subject: serial: bfin_5xx: split uart RX lock from uart port lock to avoid deadlock The RX lock is used to protect the RX buffer from concurrent access in DMA mode between the timer and RX interrupt routines. It is independent from the uart lock which is used to protect the TX buffer. It is possible for a uart TX transfer to be started up from the RX interrupt handler if low latency is enabled. So we need to split the locks to avoid deadlocking in this situation. In PIO mode, the RX lock is not necessary because the handle_simple_irq and handle_level_irq functions ensure driver interrupt handlers are called once on one core. And now that the RX path has its own lock, the TX interrupt has nothing to do with the RX path, so disabling it at the same time. Signed-off-by: Sonic Zhang Signed-off-by: Mike Frysinger Signed-off-by: Greg Kroah-Hartman --- arch/blackfin/include/asm/bfin_serial.h | 2 ++ drivers/tty/serial/bfin_5xx.c | 15 ++++++--------- 2 files changed, 8 insertions(+), 9 deletions(-) (limited to 'arch') diff --git a/arch/blackfin/include/asm/bfin_serial.h b/arch/blackfin/include/asm/bfin_serial.h index 1ff9f1468c0..7dbc664eab1 100644 --- a/arch/blackfin/include/asm/bfin_serial.h +++ b/arch/blackfin/include/asm/bfin_serial.h @@ -10,6 +10,7 @@ #define __BFIN_ASM_SERIAL_H__ #include +#include #include #include @@ -41,6 +42,7 @@ struct bfin_serial_port { struct circ_buf rx_dma_buf; struct timer_list rx_dma_timer; int rx_dma_nrows; + spinlock_t rx_lock; unsigned int tx_dma_channel; unsigned int rx_dma_channel; struct work_struct tx_dma_workqueue; diff --git a/drivers/tty/serial/bfin_5xx.c b/drivers/tty/serial/bfin_5xx.c index e381b895b04..9b1ff2b6bb3 100644 --- a/drivers/tty/serial/bfin_5xx.c +++ b/drivers/tty/serial/bfin_5xx.c @@ -370,10 +370,8 @@ static irqreturn_t bfin_serial_rx_int(int irq, void *dev_id) { struct bfin_serial_port *uart = dev_id; - spin_lock(&uart->port.lock); while (UART_GET_LSR(uart) & DR) bfin_serial_rx_chars(uart); - spin_unlock(&uart->port.lock); return IRQ_HANDLED; } @@ -490,9 +488,8 @@ void bfin_serial_rx_dma_timeout(struct bfin_serial_port *uart) { int x_pos, pos; - dma_disable_irq(uart->tx_dma_channel); - dma_disable_irq(uart->rx_dma_channel); - spin_lock_bh(&uart->port.lock); + dma_disable_irq_nosync(uart->rx_dma_channel); + spin_lock_bh(&uart->rx_lock); /* 2D DMA RX buffer ring is used. Because curr_y_count and * curr_x_count can't be read as an atomic operation, @@ -523,8 +520,7 @@ void bfin_serial_rx_dma_timeout(struct bfin_serial_port *uart) uart->rx_dma_buf.tail = uart->rx_dma_buf.head; } - spin_unlock_bh(&uart->port.lock); - dma_enable_irq(uart->tx_dma_channel); + spin_unlock_bh(&uart->rx_lock); dma_enable_irq(uart->rx_dma_channel); mod_timer(&(uart->rx_dma_timer), jiffies + DMA_RX_FLUSH_JIFFIES); @@ -571,7 +567,7 @@ static irqreturn_t bfin_serial_dma_rx_int(int irq, void *dev_id) unsigned short irqstat; int x_pos, pos; - spin_lock(&uart->port.lock); + spin_lock(&uart->rx_lock); irqstat = get_dma_curr_irqstat(uart->rx_dma_channel); clear_dma_irqstat(uart->rx_dma_channel); @@ -589,7 +585,7 @@ static irqreturn_t bfin_serial_dma_rx_int(int irq, void *dev_id) uart->rx_dma_buf.tail = uart->rx_dma_buf.head; } - spin_unlock(&uart->port.lock); + spin_unlock(&uart->rx_lock); return IRQ_HANDLED; } @@ -1332,6 +1328,7 @@ static int bfin_serial_probe(struct platform_device *pdev) } #ifdef CONFIG_SERIAL_BFIN_DMA + spin_lock_init(&uart->rx_lock); uart->tx_done = 1; uart->tx_count = 0; -- cgit v1.2.3-70-g09d2 From 11d4c3f9b671720e80353dd7e433ff2bf65e9500 Mon Sep 17 00:00:00 2001 From: "H. Peter Anvin" Date: Fri, 4 Feb 2011 16:14:11 -0800 Subject: x86-32: Make sure the stack is set up before we use it Since checkin ebba638ae723d8a8fc2f7abce5ec18b688b791d7 we call verify_cpu even in 32-bit mode. Unfortunately, calling a function means using the stack, and the stack pointer was not initialized in the 32-bit setup code! This code initializes the stack pointer, and simplifies the interface slightly since it is easier to rely on just a pointer value rather than a descriptor; we need to have different values for the segment register anyway. This retains start_stack as a virtual address, even though a physical address would be more convenient for 32 bits; the 64-bit code wants the other way around... Reported-by: Matthieu Castet LKML-Reference: <4D41E86D.8060205@free.fr> Tested-by: Kees Cook Signed-off-by: H. Peter Anvin --- arch/x86/include/asm/smp.h | 5 +---- arch/x86/kernel/acpi/sleep.c | 2 +- arch/x86/kernel/head_32.S | 30 +++++++++++++----------------- arch/x86/kernel/smpboot.c | 4 ++-- 4 files changed, 17 insertions(+), 24 deletions(-) (limited to 'arch') diff --git a/arch/x86/include/asm/smp.h b/arch/x86/include/asm/smp.h index 4c2f63c7fc1..1f469513677 100644 --- a/arch/x86/include/asm/smp.h +++ b/arch/x86/include/asm/smp.h @@ -40,10 +40,7 @@ DECLARE_EARLY_PER_CPU(u16, x86_cpu_to_apicid); DECLARE_EARLY_PER_CPU(u16, x86_bios_cpu_apicid); /* Static state in head.S used to set up a CPU */ -extern struct { - void *sp; - unsigned short ss; -} stack_start; +extern unsigned long stack_start; /* Initial stack pointer address */ struct smp_ops { void (*smp_prepare_boot_cpu)(void); diff --git a/arch/x86/kernel/acpi/sleep.c b/arch/x86/kernel/acpi/sleep.c index 69fd72aa559..4d9ebbab223 100644 --- a/arch/x86/kernel/acpi/sleep.c +++ b/arch/x86/kernel/acpi/sleep.c @@ -100,7 +100,7 @@ int acpi_save_state_mem(void) #else /* CONFIG_64BIT */ header->trampoline_segment = setup_trampoline() >> 4; #ifdef CONFIG_SMP - stack_start.sp = temp_stack + sizeof(temp_stack); + stack_start = (unsigned long)temp_stack + sizeof(temp_stack); early_gdt_descr.address = (unsigned long)get_cpu_gdt_table(smp_processor_id()); initial_gs = per_cpu_offset(smp_processor_id()); diff --git a/arch/x86/kernel/head_32.S b/arch/x86/kernel/head_32.S index fc293dc8dc3..767d6c43de3 100644 --- a/arch/x86/kernel/head_32.S +++ b/arch/x86/kernel/head_32.S @@ -85,6 +85,8 @@ RESERVE_BRK(pagetables, INIT_MAP_SIZE) */ __HEAD ENTRY(startup_32) + movl pa(stack_start),%ecx + /* test KEEP_SEGMENTS flag to see if the bootloader is asking us to not reload segments */ testb $(1<<6), BP_loadflags(%esi) @@ -99,7 +101,9 @@ ENTRY(startup_32) movl %eax,%es movl %eax,%fs movl %eax,%gs + movl %eax,%ss 2: + leal -__PAGE_OFFSET(%ecx),%esp /* * Clear BSS first so that there are no surprises... @@ -145,8 +149,6 @@ ENTRY(startup_32) * _brk_end is set up to point to the first "safe" location. * Mappings are created both at virtual address 0 (identity mapping) * and PAGE_OFFSET for up to _end. - * - * Note that the stack is not yet set up! */ #ifdef CONFIG_X86_PAE @@ -282,6 +284,9 @@ ENTRY(startup_32_smp) movl %eax,%es movl %eax,%fs movl %eax,%gs + movl pa(stack_start),%ecx + movl %eax,%ss + leal -__PAGE_OFFSET(%ecx),%esp #endif /* CONFIG_SMP */ default_entry: @@ -347,8 +352,8 @@ default_entry: movl %eax,%cr0 /* ..and set paging (PG) bit */ ljmp $__BOOT_CS,$1f /* Clear prefetch and normalize %eip */ 1: - /* Set up the stack pointer */ - lss stack_start,%esp + /* Shift the stack pointer to a virtual address */ + addl $__PAGE_OFFSET, %esp /* * Initialize eflags. Some BIOS's leave bits like NT set. This would @@ -360,9 +365,7 @@ default_entry: #ifdef CONFIG_SMP cmpb $0, ready - jz 1f /* Initial CPU cleans BSS */ - jmp checkCPUtype -1: + jnz checkCPUtype #endif /* CONFIG_SMP */ /* @@ -470,14 +473,7 @@ is386: movl $2,%ecx # set MP cld # gcc2 wants the direction flag cleared at all times pushl $0 # fake return address for unwinder -#ifdef CONFIG_SMP - movb ready, %cl movb $1, ready - cmpb $0,%cl # the first CPU calls start_kernel - je 1f - movl (stack_start), %esp -1: -#endif /* CONFIG_SMP */ jmp *(initial_code) /* @@ -670,15 +666,15 @@ ENTRY(initial_page_table) #endif .data +.balign 4 ENTRY(stack_start) .long init_thread_union+THREAD_SIZE - .long __BOOT_DS - -ready: .byte 0 early_recursion_flag: .long 0 +ready: .byte 0 + int_msg: .asciz "Unknown interrupt or fault at: %p %p %p\n" diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c index 0cbe8c0b35e..03273b6c272 100644 --- a/arch/x86/kernel/smpboot.c +++ b/arch/x86/kernel/smpboot.c @@ -638,7 +638,7 @@ wakeup_secondary_cpu_via_init(int phys_apicid, unsigned long start_eip) * target processor state. */ startup_ipi_hook(phys_apicid, (unsigned long) start_secondary, - (unsigned long)stack_start.sp); + stack_start); /* * Run STARTUP IPI loop. @@ -785,7 +785,7 @@ do_rest: #endif early_gdt_descr.address = (unsigned long)get_cpu_gdt_table(cpu); initial_code = (unsigned long)start_secondary; - stack_start.sp = (void *) c_idle.idle->thread.sp; + stack_start = c_idle.idle->thread.sp; /* start_ip had better be page-aligned! */ start_ip = setup_trampoline(); -- cgit v1.2.3-70-g09d2 From ec11594fbd5a3d2a47a7a7eda6d076363b78957c Mon Sep 17 00:00:00 2001 From: Mika Westerberg Date: Sat, 5 Feb 2011 09:52:33 +0100 Subject: ARM: 6652/1: ep93xx: correct the end address of the AC97 memory resource The last register is at offset 0xa8 making the resource end to be 0xac - 1 instead of 0xb0 - 1. Signed-off-by: Mika Westerberg Acked-by: H Hartley Sweeten Signed-off-by: Russell King --- arch/arm/mach-ep93xx/core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c index ffdf87be295..82079545adc 100644 --- a/arch/arm/mach-ep93xx/core.c +++ b/arch/arm/mach-ep93xx/core.c @@ -838,7 +838,7 @@ EXPORT_SYMBOL(ep93xx_i2s_release); static struct resource ep93xx_ac97_resources[] = { { .start = EP93XX_AAC_PHYS_BASE, - .end = EP93XX_AAC_PHYS_BASE + 0xb0 - 1, + .end = EP93XX_AAC_PHYS_BASE + 0xac - 1, .flags = IORESOURCE_MEM, }, { -- cgit v1.2.3-70-g09d2 From a9fe8d5fd52ecd17c3f3970bbcf6b3573f831898 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Sat, 5 Feb 2011 21:39:28 +0100 Subject: m32r: Fixup last __do_IRQ leftover Somehow I managed to miss the last __do_IRQ caller when I cleanup the remaining users. m32r is fully converted to the generic irq layer, but I managed to not commit the conversion of __do_IRQ() to generic_handle_irq() after compile testing the quilt series :( Pointed-out-by: Christoph Hellwig Signed-off-by: Thomas Gleixner Cc: Hirokazu Takata Cc: Paul Mundt --- arch/m32r/kernel/irq.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/m32r/kernel/irq.c b/arch/m32r/kernel/irq.c index f745c1287f3..76eaf3883fb 100644 --- a/arch/m32r/kernel/irq.c +++ b/arch/m32r/kernel/irq.c @@ -80,7 +80,7 @@ asmlinkage unsigned int do_IRQ(int irq, struct pt_regs *regs) #ifdef CONFIG_DEBUG_STACKOVERFLOW /* FIXME M32R */ #endif - __do_IRQ(irq); + generic_handle_irq(irq); irq_exit(); set_irq_regs(old_regs); -- cgit v1.2.3-70-g09d2 From 3c3a3b4c12bdda8dd098fcdd4499a298548d6f31 Mon Sep 17 00:00:00 2001 From: Krzysztof Hałasa Date: Mon, 3 May 2010 23:22:06 +0200 Subject: IXP4xx: Fix qmgr_release_queue() flushing unexpected queue entries. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Queues should be empty when released, if not, there is a safety valve. Make sure the queue is usable after it triggers. Signed-off-by: Krzysztof Hałasa --- arch/arm/mach-ixp4xx/ixp4xx_qmgr.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-ixp4xx/ixp4xx_qmgr.c b/arch/arm/mach-ixp4xx/ixp4xx_qmgr.c index bfdbe4b5a3c..852f7c9f87d 100644 --- a/arch/arm/mach-ixp4xx/ixp4xx_qmgr.c +++ b/arch/arm/mach-ixp4xx/ixp4xx_qmgr.c @@ -265,6 +265,11 @@ void qmgr_release_queue(unsigned int queue) qmgr_queue_descs[queue], queue); qmgr_queue_descs[queue][0] = '\x0'; #endif + + while ((addr = qmgr_get_entry(queue))) + printk(KERN_ERR "qmgr: released queue %i not empty: 0x%08X\n", + queue, addr); + __raw_writel(0, &qmgr_regs->sram[queue]); used_sram_bitmap[0] &= ~mask[0]; @@ -275,10 +280,6 @@ void qmgr_release_queue(unsigned int queue) spin_unlock_irq(&qmgr_lock); module_put(THIS_MODULE); - - while ((addr = qmgr_get_entry(queue))) - printk(KERN_ERR "qmgr: released queue %i not empty: 0x%08X\n", - queue, addr); } static int qmgr_init(void) -- cgit v1.2.3-70-g09d2 From e66a022a80d73b1a5d2e02c9db2c42e8b9853b40 Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Sat, 11 Dec 2010 20:17:54 +0000 Subject: arm/ixp4xx: Rename FREQ macro to avoid collisions MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit FREQ is a ridiculously short name for a platform-specific macro in a generic header, and it now conflicts with an enumeration in the gspca/ov519 driver. Also delete conditional reference to ixp4xx_get_board_tick_rate() which is not defined anywhere. Signed-off-by: Ben Hutchings Signed-off-by: Krzysztof Hałasa --- arch/arm/mach-ixp4xx/common.c | 4 ++-- arch/arm/mach-ixp4xx/include/mach/timex.h | 5 +++-- drivers/input/misc/ixp4xx-beeper.c | 6 +----- 3 files changed, 6 insertions(+), 9 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-ixp4xx/common.c b/arch/arm/mach-ixp4xx/common.c index 4dc68d6bb6b..9fd894271d5 100644 --- a/arch/arm/mach-ixp4xx/common.c +++ b/arch/arm/mach-ixp4xx/common.c @@ -432,7 +432,7 @@ static struct clocksource clocksource_ixp4xx = { .flags = CLOCK_SOURCE_IS_CONTINUOUS, }; -unsigned long ixp4xx_timer_freq = FREQ; +unsigned long ixp4xx_timer_freq = IXP4XX_TIMER_FREQ; EXPORT_SYMBOL(ixp4xx_timer_freq); static void __init ixp4xx_clocksource_init(void) { @@ -496,7 +496,7 @@ static struct clock_event_device clockevent_ixp4xx = { static void __init ixp4xx_clockevent_init(void) { - clockevent_ixp4xx.mult = div_sc(FREQ, NSEC_PER_SEC, + clockevent_ixp4xx.mult = div_sc(IXP4XX_TIMER_FREQ, NSEC_PER_SEC, clockevent_ixp4xx.shift); clockevent_ixp4xx.max_delta_ns = clockevent_delta2ns(0xfffffffe, &clockevent_ixp4xx); diff --git a/arch/arm/mach-ixp4xx/include/mach/timex.h b/arch/arm/mach-ixp4xx/include/mach/timex.h index 2c3f93c3eb7..c9e930f2933 100644 --- a/arch/arm/mach-ixp4xx/include/mach/timex.h +++ b/arch/arm/mach-ixp4xx/include/mach/timex.h @@ -10,6 +10,7 @@ * 66.66... MHz. We do a convulted calculation of CLOCK_TICK_RATE b/c the * timer register ignores the bottom 2 bits of the LATCH value. */ -#define FREQ 66666000 -#define CLOCK_TICK_RATE (((FREQ / HZ & ~IXP4XX_OST_RELOAD_MASK) + 1) * HZ) +#define IXP4XX_TIMER_FREQ 66666000 +#define CLOCK_TICK_RATE \ + (((IXP4XX_TIMER_FREQ / HZ & ~IXP4XX_OST_RELOAD_MASK) + 1) * HZ) diff --git a/drivers/input/misc/ixp4xx-beeper.c b/drivers/input/misc/ixp4xx-beeper.c index 9dfd6e5f786..1f38302a595 100644 --- a/drivers/input/misc/ixp4xx-beeper.c +++ b/drivers/input/misc/ixp4xx-beeper.c @@ -69,11 +69,7 @@ static int ixp4xx_spkr_event(struct input_dev *dev, unsigned int type, unsigned } if (value > 20 && value < 32767) -#ifndef FREQ - count = (ixp4xx_get_board_tick_rate() / (value * 4)) - 1; -#else - count = (FREQ / (value * 4)) - 1; -#endif + count = (IXP4XX_TIMER_FREQ / (value * 4)) - 1; ixp4xx_spkr_control(pin, count); -- cgit v1.2.3-70-g09d2 From 81c386cc7f4c22b81ba94709d2d58754282ea05e Mon Sep 17 00:00:00 2001 From: Scott Wood Date: Thu, 27 Jan 2011 10:31:38 +0000 Subject: powerpc: Fix pfn_valid() when memory starts at a non-zero address max_mapnr is a pfn, not an index innto mem_map[]. So don't add ARCH_PFN_OFFSET a second time. Signed-off-by: Scott Wood Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/include/asm/page.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/powerpc/include/asm/page.h b/arch/powerpc/include/asm/page.h index 53b64be40eb..da4b2000854 100644 --- a/arch/powerpc/include/asm/page.h +++ b/arch/powerpc/include/asm/page.h @@ -101,7 +101,7 @@ extern phys_addr_t kernstart_addr; #ifdef CONFIG_FLATMEM #define ARCH_PFN_OFFSET (MEMORY_START >> PAGE_SHIFT) -#define pfn_valid(pfn) ((pfn) >= ARCH_PFN_OFFSET && (pfn) < (ARCH_PFN_OFFSET + max_mapnr)) +#define pfn_valid(pfn) ((pfn) >= ARCH_PFN_OFFSET && (pfn) < max_mapnr) #endif #define virt_to_page(kaddr) pfn_to_page(__pa(kaddr) >> PAGE_SHIFT) -- cgit v1.2.3-70-g09d2 From b51cbd41a3f05fb374420dac003deb401a7cd137 Mon Sep 17 00:00:00 2001 From: Scott Wood Date: Thu, 27 Jan 2011 10:30:00 +0000 Subject: powerpc/book3e: Protect complex macro args in mmu-book3e.h Signed-off-by: Scott Wood Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/include/asm/mmu-book3e.h | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/include/asm/mmu-book3e.h b/arch/powerpc/include/asm/mmu-book3e.h index 8eaed81ea64..17194fcd404 100644 --- a/arch/powerpc/include/asm/mmu-book3e.h +++ b/arch/powerpc/include/asm/mmu-book3e.h @@ -40,8 +40,8 @@ /* MAS registers bit definitions */ -#define MAS0_TLBSEL(x) ((x << 28) & 0x30000000) -#define MAS0_ESEL(x) ((x << 16) & 0x0FFF0000) +#define MAS0_TLBSEL(x) (((x) << 28) & 0x30000000) +#define MAS0_ESEL(x) (((x) << 16) & 0x0FFF0000) #define MAS0_NV(x) ((x) & 0x00000FFF) #define MAS0_HES 0x00004000 #define MAS0_WQ_ALLWAYS 0x00000000 @@ -50,12 +50,12 @@ #define MAS1_VALID 0x80000000 #define MAS1_IPROT 0x40000000 -#define MAS1_TID(x) ((x << 16) & 0x3FFF0000) +#define MAS1_TID(x) (((x) << 16) & 0x3FFF0000) #define MAS1_IND 0x00002000 #define MAS1_TS 0x00001000 #define MAS1_TSIZE_MASK 0x00000f80 #define MAS1_TSIZE_SHIFT 7 -#define MAS1_TSIZE(x) ((x << MAS1_TSIZE_SHIFT) & MAS1_TSIZE_MASK) +#define MAS1_TSIZE(x) (((x) << MAS1_TSIZE_SHIFT) & MAS1_TSIZE_MASK) #define MAS2_EPN 0xFFFFF000 #define MAS2_X0 0x00000040 -- cgit v1.2.3-70-g09d2 From af9eef3c7b1ed004c378c89b87642f4937337d50 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Thu, 20 Jan 2011 20:36:03 +0000 Subject: powerpc: Pass the right cpu_spec to ->setup_cpu() on 64-bit When calling setup_cpu() on 64-bit, we pass a pointer to the cputable entry we have found. This used to be fine when cur_cpu_spec was a pointer to that entry, but nowadays, we copy the entry into a separate variable, and we do so before we call the setup_cpu() callback. That means that any attempt by that callback at patching the CPU table entry (to adjust CPU features for example) will patch the wrong table. Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/cputable.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c index 8d74a24c550..e8e915ce3d8 100644 --- a/arch/powerpc/kernel/cputable.c +++ b/arch/powerpc/kernel/cputable.c @@ -2076,8 +2076,8 @@ static void __init setup_cpu_spec(unsigned long offset, struct cpu_spec *s) * pointer on ppc64 and booke as we are running at 0 in real mode * on ppc64 and reloc_offset is always 0 on booke. */ - if (s->cpu_setup) { - s->cpu_setup(offset, s); + if (t->cpu_setup) { + t->cpu_setup(offset, t); } #endif /* CONFIG_PPC64 || CONFIG_BOOKE */ } -- cgit v1.2.3-70-g09d2 From 1f1936ff3febf38d582177ea319eaa278f32c91f Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Thu, 20 Jan 2011 20:35:23 +0000 Subject: powerpc: Fix some 6xx/7xxx CPU setup functions Some of those functions try to adjust the CPU features, for example to remove NAP support on some revisions. However, they seem to use r5 as an index into the CPU table entry, which might have been right a long time ago but no longer is. r4 is the right register to use. This probably caused some off behaviours on some PowerMac variants using 750cx or 7455 processor revisions. Signed-off-by: Benjamin Herrenschmidt CC: stable@kernel.org --- arch/powerpc/kernel/cpu_setup_6xx.S | 40 ++++++++++++++++++------------------- 1 file changed, 20 insertions(+), 20 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/kernel/cpu_setup_6xx.S b/arch/powerpc/kernel/cpu_setup_6xx.S index 55cba4a8a95..f8cd9fba4d3 100644 --- a/arch/powerpc/kernel/cpu_setup_6xx.S +++ b/arch/powerpc/kernel/cpu_setup_6xx.S @@ -18,7 +18,7 @@ #include _GLOBAL(__setup_cpu_603) - mflr r4 + mflr r5 BEGIN_MMU_FTR_SECTION li r10,0 mtspr SPRN_SPRG_603_LRU,r10 /* init SW LRU tracking */ @@ -27,60 +27,60 @@ BEGIN_FTR_SECTION bl __init_fpu_registers END_FTR_SECTION_IFCLR(CPU_FTR_FPU_UNAVAILABLE) bl setup_common_caches - mtlr r4 + mtlr r5 blr _GLOBAL(__setup_cpu_604) - mflr r4 + mflr r5 bl setup_common_caches bl setup_604_hid0 - mtlr r4 + mtlr r5 blr _GLOBAL(__setup_cpu_750) - mflr r4 + mflr r5 bl __init_fpu_registers bl setup_common_caches bl setup_750_7400_hid0 - mtlr r4 + mtlr r5 blr _GLOBAL(__setup_cpu_750cx) - mflr r4 + mflr r5 bl __init_fpu_registers bl setup_common_caches bl setup_750_7400_hid0 bl setup_750cx - mtlr r4 + mtlr r5 blr _GLOBAL(__setup_cpu_750fx) - mflr r4 + mflr r5 bl __init_fpu_registers bl setup_common_caches bl setup_750_7400_hid0 bl setup_750fx - mtlr r4 + mtlr r5 blr _GLOBAL(__setup_cpu_7400) - mflr r4 + mflr r5 bl __init_fpu_registers bl setup_7400_workarounds bl setup_common_caches bl setup_750_7400_hid0 - mtlr r4 + mtlr r5 blr _GLOBAL(__setup_cpu_7410) - mflr r4 + mflr r5 bl __init_fpu_registers bl setup_7410_workarounds bl setup_common_caches bl setup_750_7400_hid0 li r3,0 mtspr SPRN_L2CR2,r3 - mtlr r4 + mtlr r5 blr _GLOBAL(__setup_cpu_745x) - mflr r4 + mflr r5 bl setup_common_caches bl setup_745x_specifics - mtlr r4 + mtlr r5 blr /* Enable caches for 603's, 604, 750 & 7400 */ @@ -194,10 +194,10 @@ setup_750cx: cror 4*cr0+eq,4*cr0+eq,4*cr1+eq cror 4*cr0+eq,4*cr0+eq,4*cr2+eq bnelr - lwz r6,CPU_SPEC_FEATURES(r5) + lwz r6,CPU_SPEC_FEATURES(r4) li r7,CPU_FTR_CAN_NAP andc r6,r6,r7 - stw r6,CPU_SPEC_FEATURES(r5) + stw r6,CPU_SPEC_FEATURES(r4) blr /* 750fx specific @@ -225,12 +225,12 @@ BEGIN_FTR_SECTION andis. r11,r11,L3CR_L3E@h beq 1f END_FTR_SECTION_IFSET(CPU_FTR_L3CR) - lwz r6,CPU_SPEC_FEATURES(r5) + lwz r6,CPU_SPEC_FEATURES(r4) andi. r0,r6,CPU_FTR_L3_DISABLE_NAP beq 1f li r7,CPU_FTR_CAN_NAP andc r6,r6,r7 - stw r6,CPU_SPEC_FEATURES(r5) + stw r6,CPU_SPEC_FEATURES(r4) 1: mfspr r11,SPRN_HID0 -- cgit v1.2.3-70-g09d2 From bd03403ad5d789f75974985b698cffcd23ef9346 Mon Sep 17 00:00:00 2001 From: Jesse Larrew Date: Thu, 20 Jan 2011 19:00:51 +0000 Subject: powerpc/pseries: Fix typo in VPHN comments Correct a spelling error in VPHN comments in numa.c. Signed-off-by: Jesse Larrew Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/mm/numa.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/powerpc/mm/numa.c b/arch/powerpc/mm/numa.c index bf5cb91f07d..4d7f9e78023 100644 --- a/arch/powerpc/mm/numa.c +++ b/arch/powerpc/mm/numa.c @@ -1289,7 +1289,7 @@ u64 memory_hotplug_max(void) } #endif /* CONFIG_MEMORY_HOTPLUG */ -/* Vrtual Processor Home Node (VPHN) support */ +/* Virtual Processor Home Node (VPHN) support */ #ifdef CONFIG_PPC_SPLPAR #define VPHN_NR_CHANGE_CTRS (8) static u8 vphn_cpu_change_counts[NR_CPUS][VPHN_NR_CHANGE_CTRS]; -- cgit v1.2.3-70-g09d2 From 7639adaafbfe988d814d45181389fac7697d844e Mon Sep 17 00:00:00 2001 From: Jesse Larrew Date: Thu, 20 Jan 2011 19:01:13 +0000 Subject: powerpc/pseries: Fix brace placement in numa.c Fix brace placement in VPHN code. Signed-off-by: Jesse Larrew Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/mm/numa.c | 9 +++------ 1 file changed, 3 insertions(+), 6 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/mm/numa.c b/arch/powerpc/mm/numa.c index 4d7f9e78023..6c0cd06d0d5 100644 --- a/arch/powerpc/mm/numa.c +++ b/arch/powerpc/mm/numa.c @@ -1310,9 +1310,8 @@ static void setup_cpu_associativity_change_counters(void) u8 *counts = vphn_cpu_change_counts[cpu]; volatile u8 *hypervisor_counts = lppaca[cpu].vphn_assoc_counts; - for (i = 0; i < VPHN_NR_CHANGE_CTRS; i++) { + for (i = 0; i < VPHN_NR_CHANGE_CTRS; i++) counts[i] = hypervisor_counts[i]; - } } } @@ -1379,14 +1378,12 @@ static int vphn_unpack_associativity(const long *packed, unsigned int *unpacked) */ unpacked[i] = *((u32*)field); field += 2; - } - else if (*field & VPHN_FIELD_MSB) { + } else if (*field & VPHN_FIELD_MSB) { /* Data is in the lower 15 bits of this field */ unpacked[i] = *field & VPHN_FIELD_MASK; field++; nr_assoc_doms++; - } - else { + } else { /* Data is in the lower 15 bits of this field * concatenated with the next 16 bit field */ -- cgit v1.2.3-70-g09d2 From cd9d6cc7266ca7f3ad9bacb3262a0fda38f13c6f Mon Sep 17 00:00:00 2001 From: Jesse Larrew Date: Thu, 20 Jan 2011 19:01:35 +0000 Subject: powerpc/pseries: Remove unnecessary variable initializations in numa.c Remove unnecessary variable initializations in VPHN functions. Signed-off-by: Jesse Larrew Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/mm/numa.c | 17 ++++++++--------- 1 file changed, 8 insertions(+), 9 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/mm/numa.c b/arch/powerpc/mm/numa.c index 6c0cd06d0d5..9e36cafe307 100644 --- a/arch/powerpc/mm/numa.c +++ b/arch/powerpc/mm/numa.c @@ -1303,10 +1303,10 @@ static void set_topology_timer(void); */ static void setup_cpu_associativity_change_counters(void) { - int cpu = 0; + int cpu; for_each_possible_cpu(cpu) { - int i = 0; + int i; u8 *counts = vphn_cpu_change_counts[cpu]; volatile u8 *hypervisor_counts = lppaca[cpu].vphn_assoc_counts; @@ -1328,7 +1328,7 @@ static void setup_cpu_associativity_change_counters(void) */ static int update_cpu_associativity_changes_mask(void) { - int cpu = 0, nr_cpus = 0; + int cpu, nr_cpus = 0; cpumask_t *changes = &cpu_associativity_changes_mask; cpumask_clear(changes); @@ -1362,8 +1362,7 @@ static int update_cpu_associativity_changes_mask(void) */ static int vphn_unpack_associativity(const long *packed, unsigned int *unpacked) { - int i = 0; - int nr_assoc_doms = 0; + int i, nr_assoc_doms = 0; const u16 *field = (const u16*) packed; #define VPHN_FIELD_UNUSED (0xffff) @@ -1402,7 +1401,7 @@ static int vphn_unpack_associativity(const long *packed, unsigned int *unpacked) */ static long hcall_vphn(unsigned long cpu, unsigned int *associativity) { - long rc = 0; + long rc; long retbuf[PLPAR_HCALL9_BUFSIZE] = {0}; u64 flags = 1; int hwcpu = get_hard_smp_processor_id(cpu); @@ -1416,7 +1415,7 @@ static long hcall_vphn(unsigned long cpu, unsigned int *associativity) static long vphn_get_associativity(unsigned long cpu, unsigned int *associativity) { - long rc = 0; + long rc; rc = hcall_vphn(cpu, associativity); @@ -1442,9 +1441,9 @@ static long vphn_get_associativity(unsigned long cpu, */ int arch_update_cpu_topology(void) { - int cpu = 0, nid = 0, old_nid = 0; + int cpu, nid, old_nid; unsigned int associativity[VPHN_ASSOC_BUFSIZE] = {0}; - struct sys_device *sysdev = NULL; + struct sys_device *sysdev; for_each_cpu_mask(cpu, cpu_associativity_changes_mask) { vphn_get_associativity(cpu, associativity); -- cgit v1.2.3-70-g09d2 From 5de1669910a59025e6cf24baef242a6c264d5752 Mon Sep 17 00:00:00 2001 From: Anton Blanchard Date: Sat, 29 Jan 2011 12:24:34 +0000 Subject: powerpc/numa: Only use active VPHN count fields VPHN supports up to 8 distance fields but the number of entries in ibm,associativity-reference-points signifies how many are in use. Don't look at all the VPHN counts, only distance_ref_points_depth worth. Since we already cap our distance metrics at MAX_DISTANCE_REF_POINTS, use that to size the VPHN arrays and add a BUILD_BUG_ON to avoid it growing larger than the VPHN maximum of 8. Signed-off-by: Anton Blanchard Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/mm/numa.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/mm/numa.c b/arch/powerpc/mm/numa.c index 9e36cafe307..f25633d3d00 100644 --- a/arch/powerpc/mm/numa.c +++ b/arch/powerpc/mm/numa.c @@ -1291,8 +1291,7 @@ u64 memory_hotplug_max(void) /* Virtual Processor Home Node (VPHN) support */ #ifdef CONFIG_PPC_SPLPAR -#define VPHN_NR_CHANGE_CTRS (8) -static u8 vphn_cpu_change_counts[NR_CPUS][VPHN_NR_CHANGE_CTRS]; +static u8 vphn_cpu_change_counts[NR_CPUS][MAX_DISTANCE_REF_POINTS]; static cpumask_t cpu_associativity_changes_mask; static int vphn_enabled; static void set_topology_timer(void); @@ -1305,12 +1304,15 @@ static void setup_cpu_associativity_change_counters(void) { int cpu; + /* The VPHN feature supports a maximum of 8 reference points */ + BUILD_BUG_ON(MAX_DISTANCE_REF_POINTS > 8); + for_each_possible_cpu(cpu) { int i; u8 *counts = vphn_cpu_change_counts[cpu]; volatile u8 *hypervisor_counts = lppaca[cpu].vphn_assoc_counts; - for (i = 0; i < VPHN_NR_CHANGE_CTRS; i++) + for (i = 0; i < distance_ref_points_depth; i++) counts[i] = hypervisor_counts[i]; } } @@ -1338,7 +1340,7 @@ static int update_cpu_associativity_changes_mask(void) u8 *counts = vphn_cpu_change_counts[cpu]; volatile u8 *hypervisor_counts = lppaca[cpu].vphn_assoc_counts; - for (i = 0; i < VPHN_NR_CHANGE_CTRS; i++) { + for (i = 0; i < distance_ref_points_depth; i++) { if (hypervisor_counts[i] > counts[i]) { counts[i] = hypervisor_counts[i]; changed = 1; -- cgit v1.2.3-70-g09d2 From d69043e8069f493ebee9472bcc78b3f54c5c27d9 Mon Sep 17 00:00:00 2001 From: Anton Blanchard Date: Sat, 29 Jan 2011 12:26:19 +0000 Subject: powerpc/numa: Check for all VPHN changes The hypervisor uses unsigned 1 byte counters to signal topology changes to the OS. Since they can wrap we need to check for any difference, not just if the hypervisor count is greater than the previous count. Signed-off-by: Anton Blanchard Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/mm/numa.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/powerpc/mm/numa.c b/arch/powerpc/mm/numa.c index f25633d3d00..b2937efdfd7 100644 --- a/arch/powerpc/mm/numa.c +++ b/arch/powerpc/mm/numa.c @@ -1341,7 +1341,7 @@ static int update_cpu_associativity_changes_mask(void) volatile u8 *hypervisor_counts = lppaca[cpu].vphn_assoc_counts; for (i = 0; i < distance_ref_points_depth; i++) { - if (hypervisor_counts[i] > counts[i]) { + if (hypervisor_counts[i] != counts[i]) { counts[i] = hypervisor_counts[i]; changed = 1; } -- cgit v1.2.3-70-g09d2 From c0e5e46f3911a451b6915feda709fd1b9b7f026a Mon Sep 17 00:00:00 2001 From: Anton Blanchard Date: Sat, 29 Jan 2011 12:28:04 +0000 Subject: powerpc/numa: Add length when creating OF properties via VPHN The rest of the NUMA code expects an OF associativity property with the first cell containing the length. Without this fix all topology changes cause us to misparse the property and put the cpu into node 0. Signed-off-by: Anton Blanchard Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/mm/numa.c | 12 +++++++++--- 1 file changed, 9 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/mm/numa.c b/arch/powerpc/mm/numa.c index b2937efdfd7..d07cd08747e 100644 --- a/arch/powerpc/mm/numa.c +++ b/arch/powerpc/mm/numa.c @@ -1355,8 +1355,11 @@ static int update_cpu_associativity_changes_mask(void) return nr_cpus; } -/* 6 64-bit registers unpacked into 12 32-bit associativity values */ -#define VPHN_ASSOC_BUFSIZE (6*sizeof(u64)/sizeof(u32)) +/* + * 6 64-bit registers unpacked into 12 32-bit associativity values. To form + * the complete property we have to add the length in the first cell. + */ +#define VPHN_ASSOC_BUFSIZE (6*sizeof(u64)/sizeof(u32) + 1) /* * Convert the associativity domain numbers returned from the hypervisor @@ -1371,7 +1374,7 @@ static int vphn_unpack_associativity(const long *packed, unsigned int *unpacked) #define VPHN_FIELD_MSB (0x8000) #define VPHN_FIELD_MASK (~VPHN_FIELD_MSB) - for (i = 0; i < VPHN_ASSOC_BUFSIZE; i++) { + for (i = 1; i < VPHN_ASSOC_BUFSIZE; i++) { if (*field == VPHN_FIELD_UNUSED) { /* All significant fields processed, and remaining * fields contain the reserved value of all 1's. @@ -1394,6 +1397,9 @@ static int vphn_unpack_associativity(const long *packed, unsigned int *unpacked) } } + /* The first cell contains the length of the property */ + unpacked[0] = nr_assoc_doms; + return nr_assoc_doms; } -- cgit v1.2.3-70-g09d2 From fe5cfd63557b39007460d17c585b8dc5ed6ace93 Mon Sep 17 00:00:00 2001 From: Anton Blanchard Date: Sat, 29 Jan 2011 12:35:22 +0000 Subject: powerpc/numa: Disable VPHN on dedicated processor partitions There is no need to start up the timer and monitor topology changes on a dedicated processor partition, so disable it. Signed-off-by: Anton Blanchard Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/mm/numa.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/powerpc/mm/numa.c b/arch/powerpc/mm/numa.c index d07cd08747e..3cf33494a5a 100644 --- a/arch/powerpc/mm/numa.c +++ b/arch/powerpc/mm/numa.c @@ -1516,7 +1516,8 @@ int start_topology_update(void) { int rc = 0; - if (firmware_has_feature(FW_FEATURE_VPHN)) { + if (firmware_has_feature(FW_FEATURE_VPHN) && + get_lppaca()->shared_proc) { vphn_enabled = 1; setup_cpu_associativity_change_counters(); init_timer_deferrable(&topology_timer); -- cgit v1.2.3-70-g09d2 From 429f4d8d20b91e4a6c239f951c06a56a6ac22957 Mon Sep 17 00:00:00 2001 From: Anton Blanchard Date: Sat, 29 Jan 2011 12:37:16 +0000 Subject: powerpc/numa: Fix bug in unmap_cpu_from_node When converting to the new cpumask code I screwed up: - if (cpu_isset(cpu, numa_cpumask_lookup_table[node])) { - cpu_clear(cpu, numa_cpumask_lookup_table[node]); + if (cpumask_test_cpu(cpu, node_to_cpumask_map[node])) { + cpumask_set_cpu(cpu, node_to_cpumask_map[node]); This was introduced in commit 25863de07af9 (powerpc/cpumask: Convert NUMA code to new cpumask API) Fix it. Signed-off-by: Anton Blanchard Cc: Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/mm/numa.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/powerpc/mm/numa.c b/arch/powerpc/mm/numa.c index 3cf33494a5a..fd481232957 100644 --- a/arch/powerpc/mm/numa.c +++ b/arch/powerpc/mm/numa.c @@ -186,7 +186,7 @@ static void unmap_cpu_from_node(unsigned long cpu) dbg("removing cpu %lu from node %d\n", cpu, node); if (cpumask_test_cpu(cpu, node_to_cpumask_map[node])) { - cpumask_set_cpu(cpu, node_to_cpumask_map[node]); + cpumask_clear_cpu(cpu, node_to_cpumask_map[node]); } else { printk(KERN_ERR "WARNING: cpu %lu not found in node %d\n", cpu, node); -- cgit v1.2.3-70-g09d2 From 57cdfdf829a850a317425ed93c6a576c9ee6329c Mon Sep 17 00:00:00 2001 From: Anton Blanchard Date: Thu, 21 Oct 2010 00:52:12 +0000 Subject: powerpc: Fix hcall tracepoint recursion Spinlocks on shared processor partitions use H_YIELD to notify the hypervisor we are waiting on another virtual CPU. Unfortunately this means the hcall tracepoints can recurse. The patch below adds a percpu depth and checks it on both the entry and exit hcall tracepoints. Signed-off-by: Anton Blanchard Acked-by: Steven Rostedt Signed-off-by: Benjamin Herrenschmidt CC: stable@kernel.org --- arch/powerpc/platforms/pseries/lpar.c | 37 +++++++++++++++++++++++++++++++++++ 1 file changed, 37 insertions(+) (limited to 'arch') diff --git a/arch/powerpc/platforms/pseries/lpar.c b/arch/powerpc/platforms/pseries/lpar.c index 5d3ea9f60dd..ca5d5898d32 100644 --- a/arch/powerpc/platforms/pseries/lpar.c +++ b/arch/powerpc/platforms/pseries/lpar.c @@ -713,6 +713,13 @@ EXPORT_SYMBOL(arch_free_page); /* NB: reg/unreg are called while guarded with the tracepoints_mutex */ extern long hcall_tracepoint_refcount; +/* + * Since the tracing code might execute hcalls we need to guard against + * recursion. One example of this are spinlocks calling H_YIELD on + * shared processor partitions. + */ +static DEFINE_PER_CPU(unsigned int, hcall_trace_depth); + void hcall_tracepoint_regfunc(void) { hcall_tracepoint_refcount++; @@ -725,12 +732,42 @@ void hcall_tracepoint_unregfunc(void) void __trace_hcall_entry(unsigned long opcode, unsigned long *args) { + unsigned long flags; + unsigned int *depth; + + local_irq_save(flags); + + depth = &__get_cpu_var(hcall_trace_depth); + + if (*depth) + goto out; + + (*depth)++; trace_hcall_entry(opcode, args); + (*depth)--; + +out: + local_irq_restore(flags); } void __trace_hcall_exit(long opcode, unsigned long retval, unsigned long *retbuf) { + unsigned long flags; + unsigned int *depth; + + local_irq_save(flags); + + depth = &__get_cpu_var(hcall_trace_depth); + + if (*depth) + goto out; + + (*depth)++; trace_hcall_exit(opcode, retval, retbuf); + (*depth)--; + +out: + local_irq_restore(flags); } #endif -- cgit v1.2.3-70-g09d2 From d344e38b2c151ca5e5e39f562017127e93912528 Mon Sep 17 00:00:00 2001 From: "H. Peter Anvin" Date: Sun, 6 Feb 2011 21:16:09 -0800 Subject: x86, nx: Mark the ACPI resume trampoline code as +x We reserve lowmem for the things that need it, like the ACPI wakeup code, way early to guarantee availability. This happens before we set up the proper pagetables, so set_memory_x() has no effect. Until we have a better solution, use an initcall to mark the wakeup code executable. Originally-by: Matthieu Castet Signed-off-by: H. Peter Anvin Cc: Matthias Hopf Cc: rjw@sisk.pl Cc: Suresh Siddha LKML-Reference: <4D4F8019.2090104@zytor.com> Signed-off-by: Ingo Molnar --- arch/x86/kernel/acpi/sleep.c | 13 ++++++++++--- 1 file changed, 10 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/acpi/sleep.c b/arch/x86/kernel/acpi/sleep.c index 4d9ebbab223..68d1537b8c8 100644 --- a/arch/x86/kernel/acpi/sleep.c +++ b/arch/x86/kernel/acpi/sleep.c @@ -12,10 +12,8 @@ #include #include #include - -#ifdef CONFIG_X86_32 #include -#endif +#include #include "realmode/wakeup.h" #include "sleep.h" @@ -149,6 +147,15 @@ void __init acpi_reserve_wakeup_memory(void) memblock_x86_reserve_range(mem, mem + WAKEUP_SIZE, "ACPI WAKEUP"); } +int __init acpi_configure_wakeup_memory(void) +{ + if (acpi_realmode) + set_memory_x(acpi_realmode, WAKEUP_SIZE >> PAGE_SHIFT); + + return 0; +} +arch_initcall(acpi_configure_wakeup_memory); + static int __init acpi_sleep_setup(char *str) { -- cgit v1.2.3-70-g09d2 From 4a683a2c5e7cabe91218db28e56dc25e1b134ce3 Mon Sep 17 00:00:00 2001 From: Russell King Date: Mon, 7 Feb 2011 08:59:29 +0000 Subject: ARM: Update mach-types Signed-off-by: Russell King --- arch/arm/tools/mach-types | 105 ++++++++++++++++++++++++++++++++++++++++++++-- 1 file changed, 101 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/arm/tools/mach-types b/arch/arm/tools/mach-types index 2fea897ebeb..9d6feaabbe7 100644 --- a/arch/arm/tools/mach-types +++ b/arch/arm/tools/mach-types @@ -12,7 +12,7 @@ # # http://www.arm.linux.org.uk/developer/machines/?action=new # -# Last update: Sun Dec 12 23:24:27 2010 +# Last update: Mon Feb 7 08:59:27 2011 # # machine_is_xxx CONFIG_xxxx MACH_TYPE_xxx number # @@ -2240,7 +2240,7 @@ arm_ultimator2 MACH_ARM_ULTIMATOR2 ARM_ULTIMATOR2 2250 vs_v210 MACH_VS_V210 VS_V210 2252 vs_v212 MACH_VS_V212 VS_V212 2253 hmt MACH_HMT HMT 2254 -suen3 MACH_SUEN3 SUEN3 2255 +km_kirkwood MACH_KM_KIRKWOOD KM_KIRKWOOD 2255 vesper MACH_VESPER VESPER 2256 str9 MACH_STR9 STR9 2257 omap3_wl_ff MACH_OMAP3_WL_FF OMAP3_WL_FF 2258 @@ -2987,7 +2987,7 @@ pxwnas_500_1000 MACH_PXWNAS_500_1000 PXWNAS_500_1000 3001 ea20 MACH_EA20 EA20 3002 awm2 MACH_AWM2 AWM2 3003 ti8148evm MACH_TI8148EVM TI8148EVM 3004 -tegra_seaboard MACH_TEGRA_SEABOARD TEGRA_SEABOARD 3005 +seaboard MACH_SEABOARD SEABOARD 3005 linkstation_chlv2 MACH_LINKSTATION_CHLV2 LINKSTATION_CHLV2 3006 tera_pro2_rack MACH_TERA_PRO2_RACK TERA_PRO2_RACK 3007 rubys MACH_RUBYS RUBYS 3008 @@ -3190,7 +3190,7 @@ synergy MACH_SYNERGY SYNERGY 3205 ics_if_voip MACH_ICS_IF_VOIP ICS_IF_VOIP 3206 wlf_cragg_6410 MACH_WLF_CRAGG_6410 WLF_CRAGG_6410 3207 punica MACH_PUNICA PUNICA 3208 -sbc_nt250 MACH_SBC_NT250 SBC_NT250 3209 +trimslice MACH_TRIMSLICE TRIMSLICE 3209 mx27_wmultra MACH_MX27_WMULTRA MX27_WMULTRA 3210 mackerel MACH_MACKEREL MACKEREL 3211 fa9x27 MACH_FA9X27 FA9X27 3213 @@ -3219,3 +3219,100 @@ pivicc MACH_PIVICC PIVICC 3235 pcm048 MACH_PCM048 PCM048 3236 dds MACH_DDS DDS 3237 chalten_xa1 MACH_CHALTEN_XA1 CHALTEN_XA1 3238 +ts48xx MACH_TS48XX TS48XX 3239 +tonga2_tfttimer MACH_TONGA2_TFTTIMER TONGA2_TFTTIMER 3240 +whistler MACH_WHISTLER WHISTLER 3241 +asl_phoenix MACH_ASL_PHOENIX ASL_PHOENIX 3242 +at91sam9263otlite MACH_AT91SAM9263OTLITE AT91SAM9263OTLITE 3243 +ddplug MACH_DDPLUG DDPLUG 3244 +d2plug MACH_D2PLUG D2PLUG 3245 +kzm9d MACH_KZM9D KZM9D 3246 +verdi_lte MACH_VERDI_LTE VERDI_LTE 3247 +nanozoom MACH_NANOZOOM NANOZOOM 3248 +dm3730_som_lv MACH_DM3730_SOM_LV DM3730_SOM_LV 3249 +dm3730_torpedo MACH_DM3730_TORPEDO DM3730_TORPEDO 3250 +anchovy MACH_ANCHOVY ANCHOVY 3251 +re2rev20 MACH_RE2REV20 RE2REV20 3253 +re2rev21 MACH_RE2REV21 RE2REV21 3254 +cns21xx MACH_CNS21XX CNS21XX 3255 +rider MACH_RIDER RIDER 3257 +nsk330 MACH_NSK330 NSK330 3258 +cns2133evb MACH_CNS2133EVB CNS2133EVB 3259 +z3_816x_mod MACH_Z3_816X_MOD Z3_816X_MOD 3260 +z3_814x_mod MACH_Z3_814X_MOD Z3_814X_MOD 3261 +beect MACH_BEECT BEECT 3262 +dma_thunderbug MACH_DMA_THUNDERBUG DMA_THUNDERBUG 3263 +omn_at91sam9g20 MACH_OMN_AT91SAM9G20 OMN_AT91SAM9G20 3264 +mx25_e2s_uc MACH_MX25_E2S_UC MX25_E2S_UC 3265 +mione MACH_MIONE MIONE 3266 +top9000_tcu MACH_TOP9000_TCU TOP9000_TCU 3267 +top9000_bsl MACH_TOP9000_BSL TOP9000_BSL 3268 +kingdom MACH_KINGDOM KINGDOM 3269 +armadillo460 MACH_ARMADILLO460 ARMADILLO460 3270 +lq2 MACH_LQ2 LQ2 3271 +sweda_tms2 MACH_SWEDA_TMS2 SWEDA_TMS2 3272 +mx53_loco MACH_MX53_LOCO MX53_LOCO 3273 +acer_a8 MACH_ACER_A8 ACER_A8 3275 +acer_gauguin MACH_ACER_GAUGUIN ACER_GAUGUIN 3276 +guppy MACH_GUPPY GUPPY 3277 +mx61_ard MACH_MX61_ARD MX61_ARD 3278 +tx53 MACH_TX53 TX53 3279 +omapl138_case_a3 MACH_OMAPL138_CASE_A3 OMAPL138_CASE_A3 3280 +uemd MACH_UEMD UEMD 3281 +ccwmx51mut MACH_CCWMX51MUT CCWMX51MUT 3282 +rockhopper MACH_ROCKHOPPER ROCKHOPPER 3283 +nookcolor MACH_NOOKCOLOR NOOKCOLOR 3284 +hkdkc100 MACH_HKDKC100 HKDKC100 3285 +ts42xx MACH_TS42XX TS42XX 3286 +aebl MACH_AEBL AEBL 3287 +wario MACH_WARIO WARIO 3288 +gfs_spm MACH_GFS_SPM GFS_SPM 3289 +cm_t3730 MACH_CM_T3730 CM_T3730 3290 +isc3 MACH_ISC3 ISC3 3291 +rascal MACH_RASCAL RASCAL 3292 +hrefv60 MACH_HREFV60 HREFV60 3293 +tpt_2_0 MACH_TPT_2_0 TPT_2_0 3294 +pyramid_td MACH_PYRAMID_TD PYRAMID_TD 3295 +splendor MACH_SPLENDOR SPLENDOR 3296 +guf_planet MACH_GUF_PLANET GUF_PLANET 3297 +msm8x60_qt MACH_MSM8X60_QT MSM8X60_QT 3298 +htc_hd_mini MACH_HTC_HD_MINI HTC_HD_MINI 3299 +athene MACH_ATHENE ATHENE 3300 +deep_r_ek_1 MACH_DEEP_R_EK_1 DEEP_R_EK_1 3301 +vivow_ct MACH_VIVOW_CT VIVOW_CT 3302 +nery_1000 MACH_NERY_1000 NERY_1000 3303 +rfl109145_ssrv MACH_RFL109145_SSRV RFL109145_SSRV 3304 +nmh MACH_NMH NMH 3305 +wn802t MACH_WN802T WN802T 3306 +dragonet MACH_DRAGONET DRAGONET 3307 +geneva_b MACH_GENEVA_B GENEVA_B 3308 +at91sam9263desk16l MACH_AT91SAM9263DESK16L AT91SAM9263DESK16L 3309 +bcmhana_sv MACH_BCMHANA_SV BCMHANA_SV 3310 +bcmhana_tablet MACH_BCMHANA_TABLET BCMHANA_TABLET 3311 +koi MACH_KOI KOI 3312 +ts4800 MACH_TS4800 TS4800 3313 +tqma9263 MACH_TQMA9263 TQMA9263 3314 +holiday MACH_HOLIDAY HOLIDAY 3315 +dma_6410 MACH_DMA6410 DMA6410 3316 +pcats_overlay MACH_PCATS_OVERLAY PCATS_OVERLAY 3317 +hwgw6410 MACH_HWGW6410 HWGW6410 3318 +shenzhou MACH_SHENZHOU SHENZHOU 3319 +cwme9210 MACH_CWME9210 CWME9210 3320 +cwme9210js MACH_CWME9210JS CWME9210JS 3321 +pgs_v1 MACH_PGS_SITARA PGS_SITARA 3322 +colibri_tegra2 MACH_COLIBRI_TEGRA2 COLIBRI_TEGRA2 3323 +w21 MACH_W21 W21 3324 +polysat1 MACH_POLYSAT1 POLYSAT1 3325 +dataway MACH_DATAWAY DATAWAY 3326 +cobral138 MACH_COBRAL138 COBRAL138 3327 +roverpcs8 MACH_ROVERPCS8 ROVERPCS8 3328 +marvelc MACH_MARVELC MARVELC 3329 +navefihid MACH_NAVEFIHID NAVEFIHID 3330 +dm365_cv100 MACH_DM365_CV100 DM365_CV100 3331 +able MACH_ABLE ABLE 3332 +legacy MACH_LEGACY LEGACY 3333 +icong MACH_ICONG ICONG 3334 +rover_g8 MACH_ROVER_G8 ROVER_G8 3335 +t5388p MACH_T5388P T5388P 3336 +dingo MACH_DINGO DINGO 3337 +goflexhome MACH_GOFLEXHOME GOFLEXHOME 3338 -- cgit v1.2.3-70-g09d2 From 9d20b571f5bda7273656e1b86ef91eddc94adacc Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Mon, 7 Feb 2011 20:26:06 +1100 Subject: crypto: sha-s390 - Reset index after processing partial block The partial block handling in sha-s390 is broken when we get a partial block that is followed by an update which fills it with bytes left-over. Instead of storing the newly left-over bytes at the start of the buffer, it will be stored immediately after the previous partial block. This patch fixes this by resetting the index pointer. Signed-off-by: Herbert Xu --- arch/s390/crypto/sha_common.c | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/s390/crypto/sha_common.c b/arch/s390/crypto/sha_common.c index f42dbabc0d3..48884f89ab9 100644 --- a/arch/s390/crypto/sha_common.c +++ b/arch/s390/crypto/sha_common.c @@ -38,6 +38,7 @@ int s390_sha_update(struct shash_desc *desc, const u8 *data, unsigned int len) BUG_ON(ret != bsize); data += bsize - index; len -= bsize - index; + index = 0; } /* process as many blocks as possible */ -- cgit v1.2.3-70-g09d2 From 12dfc73e1ddb44b2d23e0ca614b6ec50596adae0 Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Mon, 7 Feb 2011 13:32:55 +0100 Subject: microblaze: Fix IRQ flag handling for MSR=0 Patch: Fix IRQ flag handling naming (sha1: f9ee29270c11dba7d0fe0b83ce47a4d8e8d2101) introduced problem on system with MSR=0. Signed-off-by: Michal Simek --- arch/microblaze/include/asm/irqflags.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/microblaze/include/asm/irqflags.h b/arch/microblaze/include/asm/irqflags.h index 5fd31905775..c4532f032b3 100644 --- a/arch/microblaze/include/asm/irqflags.h +++ b/arch/microblaze/include/asm/irqflags.h @@ -12,7 +12,7 @@ #include #include -#ifdef CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR +#if CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR static inline unsigned long arch_local_irq_save(void) { -- cgit v1.2.3-70-g09d2 From 1649700408531ec64ae33af55a1091db50d1f7da Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Mon, 7 Feb 2011 11:29:43 +0100 Subject: microblaze: Fix asm compilation warning Microblaze ASM doesn't support hex values for mfs instructions. /tmp/ccwiXVmt.s: Assembler messages: /tmp/ccwiXVmt.s:19: Warning: ignoring operands: x00 Signed-off-by: Michal Simek --- arch/microblaze/kernel/cpu/pvr.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/microblaze/kernel/cpu/pvr.c b/arch/microblaze/kernel/cpu/pvr.c index e01afa68273..488c1ed24e3 100644 --- a/arch/microblaze/kernel/cpu/pvr.c +++ b/arch/microblaze/kernel/cpu/pvr.c @@ -27,7 +27,7 @@ register unsigned tmp __asm__("r3"); \ tmp = 0x0; /* Prevent warning about unused */ \ __asm__ __volatile__ ( \ - "mfs %0, rpvr" #pvrid ";" \ + "mfs %0, rpvr" #pvrid ";" \ : "=r" (tmp) : : "memory"); \ val = tmp; \ } @@ -54,7 +54,7 @@ int cpu_has_pvr(void) if (!(flags & PVR_MSR_BIT)) return 0; - get_single_pvr(0x00, pvr0); + get_single_pvr(0, pvr0); pr_debug("%s: pvr0 is 0x%08x\n", __func__, pvr0); if (pvr0 & PVR0_PVR_FULL_MASK) -- cgit v1.2.3-70-g09d2 From 1f80a67da2da4180355bc36b2691f16684b194fd Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Mon, 7 Feb 2011 18:51:54 +0100 Subject: microblaze: Fix pte_update function Do not disable irq in asm but use irq macros. Systems with MSR=0 couldn't use pte_update function because msrclr was hardcoded. Signed-off-by: Michal Simek --- arch/microblaze/include/asm/pgtable.h | 27 +++++++++++++-------------- 1 file changed, 13 insertions(+), 14 deletions(-) (limited to 'arch') diff --git a/arch/microblaze/include/asm/pgtable.h b/arch/microblaze/include/asm/pgtable.h index b23f6807587..885574a73f0 100644 --- a/arch/microblaze/include/asm/pgtable.h +++ b/arch/microblaze/include/asm/pgtable.h @@ -411,20 +411,19 @@ static inline pte_t pte_modify(pte_t pte, pgprot_t newprot) static inline unsigned long pte_update(pte_t *p, unsigned long clr, unsigned long set) { - unsigned long old, tmp, msr; - - __asm__ __volatile__("\ - msrclr %2, 0x2\n\ - nop\n\ - lw %0, %4, r0\n\ - andn %1, %0, %5\n\ - or %1, %1, %6\n\ - sw %1, %4, r0\n\ - mts rmsr, %2\n\ - nop" - : "=&r" (old), "=&r" (tmp), "=&r" (msr), "=m" (*p) - : "r" ((unsigned long)(p + 1) - 4), "r" (clr), "r" (set), "m" (*p) - : "cc"); + unsigned long flags, old, tmp; + + raw_local_irq_save(flags); + + __asm__ __volatile__( "lw %0, %2, r0 \n" + "andn %1, %0, %3 \n" + "or %1, %1, %4 \n" + "sw %1, %2, r0 \n" + : "=&r" (old), "=&r" (tmp) + : "r" ((unsigned long)(p + 1) - 4), "r" (clr), "r" (set) + : "cc"); + + raw_local_irq_restore(flags); return old; } -- cgit v1.2.3-70-g09d2 From 0eb6aaf52965c14ba3ea245448c4806cfcd1d18c Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Fri, 4 Feb 2011 15:24:11 +0100 Subject: microblaze: Fix msr instruction detection Fix msr instructions detection. The current code just use msrclr for loading msr content and compare it with proper MSR content. If msrclr is not implemented r8 contains pc address. Previous code wanted to use MSR carry bit but if msrclr wasn't implemented carry wasn't cleared. Signed-off-by: Michal Simek --- arch/microblaze/kernel/head.S | 15 +++++++-------- arch/microblaze/kernel/setup.c | 4 ++-- 2 files changed, 9 insertions(+), 10 deletions(-) (limited to 'arch') diff --git a/arch/microblaze/kernel/head.S b/arch/microblaze/kernel/head.S index 0db20b5abb5..778a5ce2e4f 100644 --- a/arch/microblaze/kernel/head.S +++ b/arch/microblaze/kernel/head.S @@ -62,15 +62,14 @@ real_start: andi r1, r1, ~2 mts rmsr, r1 /* - * Here is checking mechanism which check if Microblaze has msr instructions - * We load msr and compare it with previous r1 value - if is the same, - * msr instructions works if not - cpu don't have them. + * According to Xilinx, msrclr instruction behaves like 'mfs rX,rpc' + * if the msrclr instruction is not enabled. We use this to detect + * if the opcode is available, by issuing msrclr and then testing the result. + * r8 == 0 - msr instructions are implemented + * r8 != 0 - msr instructions are not implemented */ - /* r8=0 - I have msr instr, 1 - I don't have them */ - rsubi r0, r0, 1 /* set the carry bit */ - msrclr r0, 0x4 /* try to clear it */ - /* read the carry bit, r8 will be '0' if msrclr exists */ - addik r8, r0, 0 + msrclr r8, 0 /* clear nothing - just read msr for test */ + cmpu r8, r8, r1 /* r1 must contain msr reg content */ /* r7 may point to an FDT, or there may be one linked in. if it's in r7, we've got to save it away ASAP. diff --git a/arch/microblaze/kernel/setup.c b/arch/microblaze/kernel/setup.c index bb1558e4b28..9312fbb37ef 100644 --- a/arch/microblaze/kernel/setup.c +++ b/arch/microblaze/kernel/setup.c @@ -161,11 +161,11 @@ void __init machine_early_init(const char *cmdline, unsigned int ram, #if CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR if (msr) eprintk("!!!Your kernel has setup MSR instruction but " - "CPU don't have it %d\n", msr); + "CPU don't have it %x\n", msr); #else if (!msr) eprintk("!!!Your kernel not setup MSR instruction but " - "CPU have it %d\n", msr); + "CPU have it %x\n", msr); #endif for (src = __ivt_start; src < __ivt_end; src++, dst++) -- cgit v1.2.3-70-g09d2 From b3e338de7e11d1e5bc4eca12833d894d1838b510 Mon Sep 17 00:00:00 2001 From: Greg Ungerer Date: Thu, 3 Feb 2011 11:17:55 +1000 Subject: m68knommu: fix use of un-defined _TIF_WORK_MASK The _TIF_WORK_MASK definition was removed in the clean up of MMU and non-MMU arch/m68k/include/asm/thread_info*.h files (this was commit cddafa3500fde4a07e5bf899ec97a04069f8f7ce, "merge MMU and non-MMU thread_info.h"). It didn't get cleaned out of the entry.S code for the 68328 and 68360 based platforms. And it was replaced by a hard coded constant mask for coldfire platforms. There is currently no need to mask any of these bits, so fix all uses (and former uses) to check for any non-zero value. Signed-off-by: Greg Ungerer --- arch/m68knommu/platform/68328/entry.S | 1 - arch/m68knommu/platform/68360/entry.S | 1 - arch/m68knommu/platform/coldfire/entry.S | 1 - 3 files changed, 3 deletions(-) (limited to 'arch') diff --git a/arch/m68knommu/platform/68328/entry.S b/arch/m68knommu/platform/68328/entry.S index 240a7a6e25c..676960cf022 100644 --- a/arch/m68knommu/platform/68328/entry.S +++ b/arch/m68knommu/platform/68328/entry.S @@ -108,7 +108,6 @@ Luser_return: movel %d1,%a2 1: move %a2@(TI_FLAGS),%d1 /* thread_info->flags */ - andl #_TIF_WORK_MASK,%d1 jne Lwork_to_do RESTORE_ALL diff --git a/arch/m68knommu/platform/68360/entry.S b/arch/m68knommu/platform/68360/entry.S index 8a28788c0ee..46c1b18c9dc 100644 --- a/arch/m68knommu/platform/68360/entry.S +++ b/arch/m68knommu/platform/68360/entry.S @@ -104,7 +104,6 @@ Luser_return: movel %d1,%a2 1: move %a2@(TI_FLAGS),%d1 /* thread_info->flags */ - andl #_TIF_WORK_MASK,%d1 jne Lwork_to_do RESTORE_ALL diff --git a/arch/m68knommu/platform/coldfire/entry.S b/arch/m68knommu/platform/coldfire/entry.S index 4ddfc3da70d..5837cf080b6 100644 --- a/arch/m68knommu/platform/coldfire/entry.S +++ b/arch/m68knommu/platform/coldfire/entry.S @@ -138,7 +138,6 @@ Luser_return: andl #-THREAD_SIZE,%d1 /* at base of kernel stack */ movel %d1,%a0 movel %a0@(TI_FLAGS),%d1 /* get thread_info->flags */ - andl #0xefff,%d1 jne Lwork_to_do /* still work to do */ Lreturn: -- cgit v1.2.3-70-g09d2 From e637804c33494e8e7e454dbc625cc4b773f38d6f Mon Sep 17 00:00:00 2001 From: Akinobu Mita Date: Tue, 8 Feb 2011 04:59:49 +0000 Subject: sparc: use bitmap_set() Use bitmap_set() instead of calling __set_bit() each bit. Signed-off-by: Akinobu Mita Cc: "David S. Miller" Cc: sparclinux@vger.kernel.org Signed-off-by: David S. Miller --- arch/sparc/lib/bitext.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/sparc/lib/bitext.c b/arch/sparc/lib/bitext.c index 764b3eb7b60..48d00e72ce1 100644 --- a/arch/sparc/lib/bitext.c +++ b/arch/sparc/lib/bitext.c @@ -10,7 +10,7 @@ */ #include -#include +#include #include @@ -80,8 +80,7 @@ int bit_map_string_get(struct bit_map *t, int len, int align) while (test_bit(offset + i, t->map) == 0) { i++; if (i == len) { - for (i = 0; i < len; i++) - __set_bit(offset + i, t->map); + bitmap_set(t->map, offset, len); if (offset == t->first_free) t->first_free = find_next_zero_bit (t->map, t->size, -- cgit v1.2.3-70-g09d2 From 711c71a092ccedf5e24cff25e577bfa0148fce66 Mon Sep 17 00:00:00 2001 From: Akinobu Mita Date: Tue, 8 Feb 2011 04:59:50 +0000 Subject: sparc: fix size argument to find_next_zero_bit() iommu_alloc_ctx() finds a zero bit in iommu->ctx_bitmap. It starts searching from iommu->ctx_lowest_free to the end of the bitmap. But the size argument to find_next_zero_bit() in iommu_alloc_ctx() is wrong. It should be the bitmap size, not the maximum size to search from the offset argument. Fortunately iommu->ctx_lowest_free is almost unused and it will not be more than 1. So the bug wasted only 1-bit at the end of iommu->ctx_bitmap. Signed-off-by: Akinobu Mita Cc: "David S. Miller" Cc: sparclinux@vger.kernel.org Signed-off-by: David S. Miller --- arch/sparc/kernel/iommu.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/sparc/kernel/iommu.c b/arch/sparc/kernel/iommu.c index 47977a77f6c..72509d0e34b 100644 --- a/arch/sparc/kernel/iommu.c +++ b/arch/sparc/kernel/iommu.c @@ -255,10 +255,9 @@ static inline iopte_t *alloc_npages(struct device *dev, struct iommu *iommu, static int iommu_alloc_ctx(struct iommu *iommu) { int lowest = iommu->ctx_lowest_free; - int sz = IOMMU_NUM_CTXS - lowest; - int n = find_next_zero_bit(iommu->ctx_bitmap, sz, lowest); + int n = find_next_zero_bit(iommu->ctx_bitmap, IOMMU_NUM_CTXS, lowest); - if (unlikely(n == sz)) { + if (unlikely(n == IOMMU_NUM_CTXS)) { n = find_next_zero_bit(iommu->ctx_bitmap, lowest, 1); if (unlikely(n == lowest)) { printk(KERN_WARNING "IOMMU: Ran out of contexts.\n"); -- cgit v1.2.3-70-g09d2 From 0c7fbbe1a15e419eb2f1a687444330c4016fdb8f Mon Sep 17 00:00:00 2001 From: Yu Tang Date: Wed, 19 Jan 2011 22:18:54 +0800 Subject: ARM: pxa: fix mfpr_sync to read from valid offset Since mfpr_mmio_base[0] is not always valid on later SoCs, fixed mpfr_sync() to read back from valid mfp offset always. Signed-off-by: Yu Tang Signed-off-by: Eric Miao --- arch/arm/plat-pxa/mfp.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/plat-pxa/mfp.c b/arch/arm/plat-pxa/mfp.c index b77e018d36c..a9aa5ad3f4e 100644 --- a/arch/arm/plat-pxa/mfp.c +++ b/arch/arm/plat-pxa/mfp.c @@ -139,10 +139,11 @@ static const unsigned long mfpr_edge[] = { #define mfp_configured(p) ((p)->config != -1) /* - * perform a read-back of any MFPR register to make sure the + * perform a read-back of any valid MFPR register to make sure the * previous writings are finished */ -#define mfpr_sync() (void)__raw_readl(mfpr_mmio_base + 0) +static unsigned long mfpr_off_readback; +#define mfpr_sync() (void)__raw_readl(mfpr_mmio_base + mfpr_off_readback) static inline void __mfp_config_run(struct mfp_pin *p) { @@ -248,6 +249,9 @@ void __init mfp_init_addr(struct mfp_addr_map *map) spin_lock_irqsave(&mfp_spin_lock, flags); + /* mfp offset for readback */ + mfpr_off_readback = map[0].offset; + for (p = map; p->start != MFP_PIN_INVALID; p++) { offset = p->offset; i = p->start; -- cgit v1.2.3-70-g09d2 From 57834a722473848338b1967f7fdd9907c713b0a7 Mon Sep 17 00:00:00 2001 From: Bjørn Forsman Date: Thu, 23 Dec 2010 16:01:02 +0100 Subject: ARM: pxa/colibri: use correct SD detect pin The use of wrong SD detect pin was introduced by this commit: ARM: pxa: Push Colibri evalboard MFP into module files This fixes it. Signed-off-by: Eric Miao --- arch/arm/mach-pxa/colibri-evalboard.c | 2 +- arch/arm/mach-pxa/colibri-pxa300.c | 2 +- arch/arm/mach-pxa/include/mach/colibri.h | 2 +- 3 files changed, 3 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-pxa/colibri-evalboard.c b/arch/arm/mach-pxa/colibri-evalboard.c index 6b2c800a113..28f667e52ef 100644 --- a/arch/arm/mach-pxa/colibri-evalboard.c +++ b/arch/arm/mach-pxa/colibri-evalboard.c @@ -50,7 +50,7 @@ static void __init colibri_mmc_init(void) GPIO0_COLIBRI_PXA270_SD_DETECT; if (machine_is_colibri300()) /* PXA300 Colibri */ colibri_mci_platform_data.gpio_card_detect = - GPIO39_COLIBRI_PXA300_SD_DETECT; + GPIO13_COLIBRI_PXA300_SD_DETECT; else /* PXA320 Colibri */ colibri_mci_platform_data.gpio_card_detect = GPIO28_COLIBRI_PXA320_SD_DETECT; diff --git a/arch/arm/mach-pxa/colibri-pxa300.c b/arch/arm/mach-pxa/colibri-pxa300.c index fddb16d07eb..66dd81cbc8a 100644 --- a/arch/arm/mach-pxa/colibri-pxa300.c +++ b/arch/arm/mach-pxa/colibri-pxa300.c @@ -41,7 +41,7 @@ static mfp_cfg_t colibri_pxa300_evalboard_pin_config[] __initdata = { GPIO4_MMC1_DAT1, GPIO5_MMC1_DAT2, GPIO6_MMC1_DAT3, - GPIO39_GPIO, /* SD detect */ + GPIO13_GPIO, /* GPIO13_COLIBRI_PXA300_SD_DETECT */ /* UHC */ GPIO0_2_USBH_PEN, diff --git a/arch/arm/mach-pxa/include/mach/colibri.h b/arch/arm/mach-pxa/include/mach/colibri.h index 388a96f1ef9..cb4236e98a0 100644 --- a/arch/arm/mach-pxa/include/mach/colibri.h +++ b/arch/arm/mach-pxa/include/mach/colibri.h @@ -60,7 +60,7 @@ static inline void colibri_pxa3xx_init_nand(void) {} #define GPIO113_COLIBRI_PXA270_TS_IRQ 113 /* GPIO definitions for Colibri PXA300/310 */ -#define GPIO39_COLIBRI_PXA300_SD_DETECT 39 +#define GPIO13_COLIBRI_PXA300_SD_DETECT 13 /* GPIO definitions for Colibri PXA320 */ #define GPIO28_COLIBRI_PXA320_SD_DETECT 28 -- cgit v1.2.3-70-g09d2 From 3d9cb0eafd024d6fc1b1583ff9b17e5f60951fd9 Mon Sep 17 00:00:00 2001 From: Eric Miao Date: Wed, 26 Jan 2011 05:04:00 +0800 Subject: ARM: pxa: only save/restore registers when pm functions are defined Reported-and-tested-by: Sven Neumann Signed-off-by: Eric Miao --- arch/arm/mach-pxa/pm.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-pxa/pm.c b/arch/arm/mach-pxa/pm.c index 978e1b28954..1807c9abdde 100644 --- a/arch/arm/mach-pxa/pm.c +++ b/arch/arm/mach-pxa/pm.c @@ -33,7 +33,7 @@ int pxa_pm_enter(suspend_state_t state) #endif /* skip registers saving for standby */ - if (state != PM_SUSPEND_STANDBY) { + if (state != PM_SUSPEND_STANDBY && pxa_cpu_pm_fns->save) { pxa_cpu_pm_fns->save(sleep_save); /* before sleeping, calculate and save a checksum */ for (i = 0; i < pxa_cpu_pm_fns->save_count - 1; i++) @@ -44,7 +44,7 @@ int pxa_pm_enter(suspend_state_t state) pxa_cpu_pm_fns->enter(state); cpu_init(); - if (state != PM_SUSPEND_STANDBY) { + if (state != PM_SUSPEND_STANDBY && pxa_cpu_pm_fns->restore) { /* after sleeping, validate the checksum */ for (i = 0; i < pxa_cpu_pm_fns->save_count - 1; i++) checksum += sleep_save[i]; -- cgit v1.2.3-70-g09d2 From 285ca2ee31a5999e6498e6b2466f346bb5f0047c Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Mon, 31 Jan 2011 23:06:53 +0100 Subject: ARM: pxa: Properly configure PWM period for palm27x Signed-off-by: Marek Vasut Signed-off-by: Eric Miao --- arch/arm/mach-pxa/palm27x.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-pxa/palm27x.c b/arch/arm/mach-pxa/palm27x.c index 405b92a2979..35572c427fa 100644 --- a/arch/arm/mach-pxa/palm27x.c +++ b/arch/arm/mach-pxa/palm27x.c @@ -323,7 +323,7 @@ static struct platform_pwm_backlight_data palm27x_backlight_data = { .pwm_id = 0, .max_brightness = 0xfe, .dft_brightness = 0x7e, - .pwm_period_ns = 3500, + .pwm_period_ns = 3500 * 1024, .init = palm27x_backlight_init, .notify = palm27x_backlight_notify, .exit = palm27x_backlight_exit, -- cgit v1.2.3-70-g09d2 From 893a5ab6ee7d51b231ed45aa844f8088642cb6bf Mon Sep 17 00:00:00 2001 From: Joerg Roedel Date: Fri, 14 Jan 2011 16:45:01 +0100 Subject: KVM: SVM: Make sure KERNEL_GS_BASE is valid when loading gs_index The gs_index loading code uses the swapgs instruction to switch to the user gs_base temporarily. This is unsave in an lightweight exit-path in KVM on AMD because the KERNEL_GS_BASE MSR is switches lazily. An NMI happening in the critical path of load_gs_index may use the wrong GS_BASE value then leading to unpredictable behavior, e.g. a triple-fault. This patch fixes the issue by making sure that load_gs_index is called only with a valid KERNEL_GS_BASE value loaded in KVM. Signed-off-by: Joerg Roedel Signed-off-by: Avi Kivity --- arch/x86/kvm/svm.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c index 25bd1bc5aad..54ce246a383 100644 --- a/arch/x86/kvm/svm.c +++ b/arch/x86/kvm/svm.c @@ -1150,8 +1150,8 @@ static void svm_vcpu_put(struct kvm_vcpu *vcpu) kvm_load_ldt(svm->host.ldt); #ifdef CONFIG_X86_64 loadsegment(fs, svm->host.fs); - load_gs_index(svm->host.gs); wrmsrl(MSR_KERNEL_GS_BASE, current->thread.gs); + load_gs_index(svm->host.gs); #else loadsegment(gs, svm->host.gs); #endif -- cgit v1.2.3-70-g09d2 From 15490ef8ff8fd22d677cb5d4f6a98e5a79118dba Mon Sep 17 00:00:00 2001 From: Russell King Date: Wed, 9 Feb 2011 16:33:46 +0000 Subject: ARM: Avoid building unsafe kernels on OMAP2 and MX3 OMAP2 (armv6) and MX3 turn off support for the V6K instructions, which when they include support for SMP kernels means that the resulting kernel is unsafe on SMP and can result in corrupted filesystems as we end up using unsafe bitops. Re-enable the use of V6K instructions on such kernels, and let such kernels running on V6 CPUs eat undefined instruction faults which will be much safer than filesystem corruption. Next merge window we can fix this properly (as it requires a much bigger set of changes.) Acked-by: Tony Lindgren Signed-off-by: Russell King --- arch/arm/mm/Kconfig | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig index 9d30c6f804b..c9d2d56fece 100644 --- a/arch/arm/mm/Kconfig +++ b/arch/arm/mm/Kconfig @@ -405,7 +405,7 @@ config CPU_V6 config CPU_32v6K bool "Support ARM V6K processor extensions" if !SMP depends on CPU_V6 || CPU_V7 - default y if SMP && !(ARCH_MX3 || ARCH_OMAP2) + default y if SMP help Say Y here if your ARMv6 processor supports the 'K' extension. This enables the kernel to use some instructions not present @@ -416,7 +416,7 @@ config CPU_32v6K # ARMv7 config CPU_V7 bool "Support ARM V7 processor" if ARCH_INTEGRATOR || MACH_REALVIEW_EB || MACH_REALVIEW_PBX - select CPU_32v6K if !ARCH_OMAP2 + select CPU_32v6K select CPU_32v7 select CPU_ABRT_EV7 select CPU_PABRT_V7 -- cgit v1.2.3-70-g09d2 From 2fb270f3212a1e6a73f86f76c85caee93aae4386 Mon Sep 17 00:00:00 2001 From: Jan Beulich Date: Wed, 9 Feb 2011 08:21:02 +0000 Subject: x86: Fix section mismatch in LAPIC initialization Additionally doing things conditionally upon smp_processor_id() being zero is generally a bad idea, as this means CPU 0 cannot be offlined and brought back online later again. While there may be other places where this is done, I think adding more of those should be avoided so that some day SMP can really become "symmetrical". Signed-off-by: Jan Beulich Cc: Cyrill Gorcunov LKML-Reference: <4D525C7E0200007800030EE1@vpn.id2.novell.com> Signed-off-by: Ingo Molnar --- arch/x86/include/asm/apic.h | 1 + arch/x86/kernel/apic/apic.c | 9 +++++++-- arch/x86/kernel/smpboot.c | 4 ++-- 3 files changed, 10 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/x86/include/asm/apic.h b/arch/x86/include/asm/apic.h index 5e3969c36d7..3c896946f4c 100644 --- a/arch/x86/include/asm/apic.h +++ b/arch/x86/include/asm/apic.h @@ -233,6 +233,7 @@ extern void sync_Arb_IDs(void); extern void init_bsp_APIC(void); extern void setup_local_APIC(void); extern void end_local_APIC_setup(void); +extern void bsp_end_local_APIC_setup(void); extern void init_apic_mappings(void); void register_lapic_address(unsigned long address); extern void setup_boot_APIC_clock(void); diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c index 06c196d7e59..76b96d74978 100644 --- a/arch/x86/kernel/apic/apic.c +++ b/arch/x86/kernel/apic/apic.c @@ -1381,12 +1381,17 @@ void __cpuinit end_local_APIC_setup(void) #endif apic_pm_activate(); +} + +void __init bsp_end_local_APIC_setup(void) +{ + end_local_APIC_setup(); /* * Now that local APIC setup is completed for BP, configure the fault * handling for interrupt remapping. */ - if (!smp_processor_id() && intr_remapping_enabled) + if (intr_remapping_enabled) enable_drhd_fault_handling(); } @@ -1756,7 +1761,7 @@ int __init APIC_init_uniprocessor(void) enable_IO_APIC(); #endif - end_local_APIC_setup(); + bsp_end_local_APIC_setup(); #ifdef CONFIG_X86_IO_APIC if (smp_found_config && !skip_ioapic_setup && nr_ioapics) diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c index 03273b6c272..08776a95348 100644 --- a/arch/x86/kernel/smpboot.c +++ b/arch/x86/kernel/smpboot.c @@ -1060,7 +1060,7 @@ static int __init smp_sanity_check(unsigned max_cpus) connect_bsp_APIC(); setup_local_APIC(); - end_local_APIC_setup(); + bsp_end_local_APIC_setup(); return -1; } @@ -1137,7 +1137,7 @@ void __init native_smp_prepare_cpus(unsigned int max_cpus) if (!skip_ioapic_setup && nr_ioapics) enable_IO_APIC(); - end_local_APIC_setup(); + bsp_end_local_APIC_setup(); map_cpu_to_logical_apicid(); -- cgit v1.2.3-70-g09d2 From 0193c00e85a35ceee7856c89c25b34d5752e0baa Mon Sep 17 00:00:00 2001 From: Russell King Date: Thu, 10 Feb 2011 13:05:13 +0000 Subject: ARM: make SWP emulation explicit on !CPU_USE_DOMAINS SWP emulation requires that CPU domain support is disabled in order to work safely. Make that explicit in the kernel configuration to prevent illegal configurations being generated. Signed-off-by: Russell King --- arch/arm/mm/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig index c9d2d56fece..e4509bae8fc 100644 --- a/arch/arm/mm/Kconfig +++ b/arch/arm/mm/Kconfig @@ -644,7 +644,7 @@ config ARM_THUMBEE config SWP_EMULATE bool "Emulate SWP/SWPB instructions" - depends on CPU_V7 && !CPU_V6 + depends on !CPU_USE_DOMAINS && CPU_V7 && !CPU_V6 select HAVE_PROC_CPU if PROC_FS default y if SMP help -- cgit v1.2.3-70-g09d2 From 4a9cb360197684a861bc06f06d33d5fcc8ffcbf5 Mon Sep 17 00:00:00 2001 From: Russell King Date: Thu, 10 Feb 2011 15:25:18 +0000 Subject: ARM: fixup SMP alternatives in modules With certain configurations, we inline the unlock functions in modules, which results in SMP alternatives being created in modules. We need to fix those up when loading a module to prevent undefined instruction faults. Signed-off-by: Russell King --- arch/arm/kernel/head.S | 38 ++++++++++++++++++++++++++------------ arch/arm/kernel/module.c | 22 +++++++++++++++++++++- 2 files changed, 47 insertions(+), 13 deletions(-) (limited to 'arch') diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S index c0225da3fb2..f06ff9feb0d 100644 --- a/arch/arm/kernel/head.S +++ b/arch/arm/kernel/head.S @@ -391,6 +391,7 @@ ENDPROC(__turn_mmu_on) #ifdef CONFIG_SMP_ON_UP + __INIT __fixup_smp: and r3, r9, #0x000f0000 @ architecture version teq r3, #0x000f0000 @ CPU ID supported? @@ -415,18 +416,7 @@ __fixup_smp_on_up: sub r3, r0, r3 add r4, r4, r3 add r5, r5, r3 -2: cmp r4, r5 - movhs pc, lr - ldmia r4!, {r0, r6} - ARM( str r6, [r0, r3] ) - THUMB( add r0, r0, r3 ) -#ifdef __ARMEB__ - THUMB( mov r6, r6, ror #16 ) @ Convert word order for big-endian. -#endif - THUMB( strh r6, [r0], #2 ) @ For Thumb-2, store as two halfwords - THUMB( mov r6, r6, lsr #16 ) @ to be robust against misaligned r3. - THUMB( strh r6, [r0] ) - b 2b + b __do_fixup_smp_on_up ENDPROC(__fixup_smp) .align @@ -440,7 +430,31 @@ smp_on_up: ALT_SMP(.long 1) ALT_UP(.long 0) .popsection +#endif + .text +__do_fixup_smp_on_up: + cmp r4, r5 + movhs pc, lr + ldmia r4!, {r0, r6} + ARM( str r6, [r0, r3] ) + THUMB( add r0, r0, r3 ) +#ifdef __ARMEB__ + THUMB( mov r6, r6, ror #16 ) @ Convert word order for big-endian. #endif + THUMB( strh r6, [r0], #2 ) @ For Thumb-2, store as two halfwords + THUMB( mov r6, r6, lsr #16 ) @ to be robust against misaligned r3. + THUMB( strh r6, [r0] ) + b __do_fixup_smp_on_up +ENDPROC(__do_fixup_smp_on_up) + +ENTRY(fixup_smp) + stmfd sp!, {r4 - r6, lr} + mov r4, r0 + add r5, r0, r1 + mov r3, #0 + bl __do_fixup_smp_on_up + ldmfd sp!, {r4 - r6, pc} +ENDPROC(fixup_smp) #include "head-common.S" diff --git a/arch/arm/kernel/module.c b/arch/arm/kernel/module.c index 2cfe8161b47..6d4105e6872 100644 --- a/arch/arm/kernel/module.c +++ b/arch/arm/kernel/module.c @@ -22,6 +22,7 @@ #include #include +#include #include #ifdef CONFIG_XIP_KERNEL @@ -268,12 +269,28 @@ struct mod_unwind_map { const Elf_Shdr *txt_sec; }; +static const Elf_Shdr *find_mod_section(const Elf32_Ehdr *hdr, + const Elf_Shdr *sechdrs, const char *name) +{ + const Elf_Shdr *s, *se; + const char *secstrs = (void *)hdr + sechdrs[hdr->e_shstrndx].sh_offset; + + for (s = sechdrs, se = sechdrs + hdr->e_shnum; s < se; s++) + if (strcmp(name, secstrs + s->sh_name) == 0) + return s; + + return NULL; +} + +extern void fixup_smp(const void *, unsigned long); + int module_finalize(const Elf32_Ehdr *hdr, const Elf_Shdr *sechdrs, struct module *mod) { + const Elf_Shdr * __maybe_unused s = NULL; #ifdef CONFIG_ARM_UNWIND const char *secstrs = (void *)hdr + sechdrs[hdr->e_shstrndx].sh_offset; - const Elf_Shdr *s, *sechdrs_end = sechdrs + hdr->e_shnum; + const Elf_Shdr *sechdrs_end = sechdrs + hdr->e_shnum; struct mod_unwind_map maps[ARM_SEC_MAX]; int i; @@ -315,6 +332,9 @@ int module_finalize(const Elf32_Ehdr *hdr, const Elf_Shdr *sechdrs, maps[i].txt_sec->sh_addr, maps[i].txt_sec->sh_size); #endif + s = find_mod_section(hdr, sechdrs, ".alt.smp.init"); + if (s && !is_smp()) + fixup_smp((void *)s->sh_addr, s->sh_size); return 0; } -- cgit v1.2.3-70-g09d2 From cb06199b1df492fcfbaedd2256b5054f944b664f Mon Sep 17 00:00:00 2001 From: Rabin Vincent Date: Wed, 9 Feb 2011 11:35:12 +0100 Subject: ARM: 6654/1: perf/oprofile: fix off-by-one in stack check Since tail is the previous fp - 1, we need to compare the new fp with tail + 1 to ensure that we don't end up passing in the same tail again, in order to avoid a potential infinite loop in the perf interrupt handler (which has been observed to occur). A similar fix seems to be needed in the OProfile code. Acked-by: Will Deacon Signed-off-by: Rabin Vincent Signed-off-by: Russell King --- arch/arm/kernel/perf_event.c | 2 +- arch/arm/oprofile/common.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/kernel/perf_event.c b/arch/arm/kernel/perf_event.c index 5efa2647a2f..d150ad1ccb5 100644 --- a/arch/arm/kernel/perf_event.c +++ b/arch/arm/kernel/perf_event.c @@ -700,7 +700,7 @@ user_backtrace(struct frame_tail __user *tail, * Frame pointers should strictly progress back up the stack * (towards higher addresses). */ - if (tail >= buftail.fp) + if (tail + 1 >= buftail.fp) return NULL; return buftail.fp - 1; diff --git a/arch/arm/oprofile/common.c b/arch/arm/oprofile/common.c index 8aa974491df..6adda2b5fa3 100644 --- a/arch/arm/oprofile/common.c +++ b/arch/arm/oprofile/common.c @@ -85,7 +85,7 @@ static struct frame_tail* user_backtrace(struct frame_tail *tail) /* frame pointers should strictly progress back up the stack * (towards higher addresses) */ - if (tail >= buftail[0].fp) + if (tail + 1 >= buftail[0].fp) return NULL; return buftail[0].fp-1; -- cgit v1.2.3-70-g09d2 From 3de04984c62559b7d59ecb3ad010fd148f90f030 Mon Sep 17 00:00:00 2001 From: Thomas Abraham Date: Tue, 25 Jan 2011 08:37:49 +0900 Subject: ARM: S5PV310: Add support System MMU on SMDKV310 The 's5pv310_device_sysmmu' is used on SMDKV310. But since it is not compiled now, there is a build error. To fix this compilation error, S5PV310_DEV_SYSMMU needs to be selected for SMDKV310 board. This patch enables System MMU support on SMDKV310. Signed-off-by: Thomas Abraham [kgene.kim@samsung.com: Adding description] Signed-off-by: Kukjin Kim --- arch/arm/mach-s5pv310/Kconfig | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/arm/mach-s5pv310/Kconfig b/arch/arm/mach-s5pv310/Kconfig index 09c4c21b70c..b2a9acc5185 100644 --- a/arch/arm/mach-s5pv310/Kconfig +++ b/arch/arm/mach-s5pv310/Kconfig @@ -122,6 +122,7 @@ config MACH_SMDKV310 select S3C_DEV_HSMMC2 select S3C_DEV_HSMMC3 select S5PV310_DEV_PD + select S5PV310_DEV_SYSMMU select S5PV310_SETUP_I2C1 select S5PV310_SETUP_SDHCI help -- cgit v1.2.3-70-g09d2 From 401945212b8a5c3a66218771745e6cfca16e5157 Mon Sep 17 00:00:00 2001 From: Kukjin Kim Date: Tue, 1 Feb 2011 15:08:53 +0900 Subject: ARM: S5PV310: Cleanup System MMU This patch cleans following up. - Moved definition of System MMU IPNUM into mach/sysmmu.h - Removed useless SYSMMU_DEBUG configuration - Removed useless header file plat/sysmmu.h Signed-off-by: Kukjin Kim --- arch/arm/mach-s5pv310/include/mach/map.h | 2 -- arch/arm/mach-s5pv310/include/mach/sysmmu.h | 5 ++++- arch/arm/plat-s5p/Kconfig | 24 ++++++++---------------- arch/arm/plat-s5p/Makefile | 2 +- arch/arm/plat-s5p/include/plat/sysmmu.h | 23 ----------------------- arch/arm/plat-s5p/sysmmu.c | 4 +--- 6 files changed, 14 insertions(+), 46 deletions(-) delete mode 100644 arch/arm/plat-s5p/include/plat/sysmmu.h (limited to 'arch') diff --git a/arch/arm/mach-s5pv310/include/mach/map.h b/arch/arm/mach-s5pv310/include/mach/map.h index 74d400625a2..3060f78e12a 100644 --- a/arch/arm/mach-s5pv310/include/mach/map.h +++ b/arch/arm/mach-s5pv310/include/mach/map.h @@ -124,8 +124,6 @@ #define S5PV310_PA_SYSMMU_TV 0x12E20000 #define S5PV310_PA_SYSMMU_MFC_L 0x13620000 #define S5PV310_PA_SYSMMU_MFC_R 0x13630000 -#define S5PV310_SYSMMU_TOTAL_IPNUM 16 -#define S5P_SYSMMU_TOTAL_IPNUM S5PV310_SYSMMU_TOTAL_IPNUM /* compatibiltiy defines. */ #define S3C_PA_UART S5PV310_PA_UART diff --git a/arch/arm/mach-s5pv310/include/mach/sysmmu.h b/arch/arm/mach-s5pv310/include/mach/sysmmu.h index 662fe85ff4d..598fc5c9211 100644 --- a/arch/arm/mach-s5pv310/include/mach/sysmmu.h +++ b/arch/arm/mach-s5pv310/include/mach/sysmmu.h @@ -13,6 +13,9 @@ #ifndef __ASM_ARM_ARCH_SYSMMU_H #define __ASM_ARM_ARCH_SYSMMU_H __FILE__ +#define S5PV310_SYSMMU_TOTAL_IPNUM 16 +#define S5P_SYSMMU_TOTAL_IPNUM S5PV310_SYSMMU_TOTAL_IPNUM + enum s5pv310_sysmmu_ips { SYSMMU_MDMA, SYSMMU_SSS, @@ -32,7 +35,7 @@ enum s5pv310_sysmmu_ips { SYSMMU_MFC_R, }; -static char *sysmmu_ips_name[S5P_SYSMMU_TOTAL_IPNUM] = { +static char *sysmmu_ips_name[S5PV310_SYSMMU_TOTAL_IPNUM] = { "SYSMMU_MDMA" , "SYSMMU_SSS" , "SYSMMU_FIMC0" , diff --git a/arch/arm/plat-s5p/Kconfig b/arch/arm/plat-s5p/Kconfig index deb39951a22..557f8c507f6 100644 --- a/arch/arm/plat-s5p/Kconfig +++ b/arch/arm/plat-s5p/Kconfig @@ -37,6 +37,14 @@ config S5P_GPIO_INT help Common code for the GPIO interrupts (other than external interrupts.) +comment "System MMU" + +config S5P_SYSTEM_MMU + bool "S5P SYSTEM MMU" + depends on ARCH_S5PV310 + help + Say Y here if you want to enable System MMU + config S5P_DEV_FIMC0 bool help @@ -66,19 +74,3 @@ config S5P_DEV_CSIS1 bool help Compile in platform device definitions for MIPI-CSIS channel 1 - -menuconfig S5P_SYSMMU - bool "SYSMMU support" - depends on ARCH_S5PV310 - help - This is a System MMU driver for Samsung ARM based Soc. - -if S5P_SYSMMU - -config S5P_SYSMMU_DEBUG - bool "Enables debug messages" - depends on S5P_SYSMMU - help - This enables SYSMMU driver debug massages. - -endif diff --git a/arch/arm/plat-s5p/Makefile b/arch/arm/plat-s5p/Makefile index 92efe1adcfd..4bd5cf90897 100644 --- a/arch/arm/plat-s5p/Makefile +++ b/arch/arm/plat-s5p/Makefile @@ -19,6 +19,7 @@ obj-y += clock.o obj-y += irq.o obj-$(CONFIG_S5P_EXT_INT) += irq-eint.o obj-$(CONFIG_S5P_GPIO_INT) += irq-gpioint.o +obj-$(CONFIG_S5P_SYSTEM_MMU) += sysmmu.o obj-$(CONFIG_PM) += pm.o obj-$(CONFIG_PM) += irq-pm.o @@ -30,4 +31,3 @@ obj-$(CONFIG_S5P_DEV_FIMC2) += dev-fimc2.o obj-$(CONFIG_S5P_DEV_ONENAND) += dev-onenand.o obj-$(CONFIG_S5P_DEV_CSIS0) += dev-csis0.o obj-$(CONFIG_S5P_DEV_CSIS1) += dev-csis1.o -obj-$(CONFIG_S5P_SYSMMU) += sysmmu.o diff --git a/arch/arm/plat-s5p/include/plat/sysmmu.h b/arch/arm/plat-s5p/include/plat/sysmmu.h deleted file mode 100644 index db298fc5438..00000000000 --- a/arch/arm/plat-s5p/include/plat/sysmmu.h +++ /dev/null @@ -1,23 +0,0 @@ -/* linux/arch/arm/plat-s5p/include/plat/sysmmu.h - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * Samsung sysmmu driver - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_PLAT_S5P_SYSMMU_H -#define __ASM_PLAT_S5P_SYSMMU_H __FILE__ - -/* debug macro */ -#ifdef CONFIG_S5P_SYSMMU_DEBUG -#define sysmmu_debug(fmt, arg...) printk(KERN_INFO "[%s] " fmt, __func__, ## arg) -#else -#define sysmmu_debug(fmt, arg...) do { } while (0) -#endif - -#endif /* __ASM_PLAT_S5P_SYSMMU_H */ diff --git a/arch/arm/plat-s5p/sysmmu.c b/arch/arm/plat-s5p/sysmmu.c index d804914dc2e..ffe8a48bc3c 100644 --- a/arch/arm/plat-s5p/sysmmu.c +++ b/arch/arm/plat-s5p/sysmmu.c @@ -16,8 +16,6 @@ #include #include -#include - struct sysmmu_controller s5p_sysmmu_cntlrs[S5P_SYSMMU_TOTAL_IPNUM]; void s5p_sysmmu_register(struct sysmmu_controller *sysmmuconp) @@ -123,7 +121,7 @@ static int s5p_sysmmu_set_tablebase(sysmmu_ips ips) : "=r" (pg) : : "cc"); \ pg &= ~0x3fff; - sysmmu_debug("CP15 TTBR0 : 0x%x\n", pg); + printk(KERN_INFO "%s: CP15 TTBR0 : 0x%x\n", __func__, pg); /* Set sysmmu page table base address */ __raw_writel(pg, sysmmuconp->regs + S5P_PT_BASE_ADDR); -- cgit v1.2.3-70-g09d2 From a09e2b21cab92e98728c16f0e6f456f723dadf8b Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Mon, 7 Feb 2011 10:51:04 +0900 Subject: ARM: SAMSUNG: Ensure struct sys_device is declared in plat/pm.h Previously we were relying on it being pulled in by other headers for the prototype of s3c24xx_irq_suspend() and s3c24xx_irq_resume(). Signed-off-by: Mark Brown Signed-off-by: Kukjin Kim --- arch/arm/plat-samsung/include/plat/pm.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch') diff --git a/arch/arm/plat-samsung/include/plat/pm.h b/arch/arm/plat-samsung/include/plat/pm.h index d9025e37767..30518cc9a67 100644 --- a/arch/arm/plat-samsung/include/plat/pm.h +++ b/arch/arm/plat-samsung/include/plat/pm.h @@ -17,6 +17,8 @@ #include +struct sys_device; + #ifdef CONFIG_PM extern __init int s3c_pm_init(void); -- cgit v1.2.3-70-g09d2 From 9bc433a1db702138371c565526232e9159f14497 Mon Sep 17 00:00:00 2001 From: Dave Martin Date: Fri, 11 Feb 2011 16:41:20 +0100 Subject: ARM: 6659/1: Thumb-2: Make CONFIG_OABI_COMPAT depend on !CONFIG_THUMB2_KERNEL rmk says: "You might as well make OABI_COMPAT depend on !THUMB2_KERNEL. OABI userland is useless without FPA support." nwfpe doesn't work with Thumb-2 anyway and will probably never get ported, so I can't argue with that. This patch implements the dependency change. Signed-off-by: Dave Martin Acked-by: Nicolas Pitre Signed-off-by: Russell King --- arch/arm/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 5cff165b7eb..26d45e5b636 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -1391,7 +1391,7 @@ config AEABI config OABI_COMPAT bool "Allow old ABI binaries to run with this kernel (EXPERIMENTAL)" - depends on AEABI && EXPERIMENTAL + depends on AEABI && EXPERIMENTAL && !THUMB2_KERNEL default y help This option preserves the old syscall interface along with the -- cgit v1.2.3-70-g09d2 From 34cd2d38db423a991a36d14e9f79e98993addd07 Mon Sep 17 00:00:00 2001 From: Dmitry Eremin-Solenikov Date: Fri, 11 Feb 2011 16:26:10 +0100 Subject: ARM: 6658/1: collie: do actually pass locomo_info to locomo driver MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit locomo_info isn't actually used as a platform_data on collie platform: arm/mach-sa1100/collie.c:237: warning: ‘locomo_info’ defined but not used So locomo driver doesn't setup IRQs correctly. Pass locomo_info to the driver. Signed-off-by: Dmitry Eremin-Solenikov Signed-off-by: Russell King --- arch/arm/mach-sa1100/collie.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-sa1100/collie.c b/arch/arm/mach-sa1100/collie.c index d43c5ef58eb..bd3e1bfdd6a 100644 --- a/arch/arm/mach-sa1100/collie.c +++ b/arch/arm/mach-sa1100/collie.c @@ -241,6 +241,9 @@ static struct locomo_platform_data locomo_info = { struct platform_device collie_locomo_device = { .name = "locomo", .id = 0, + .dev = { + .platform_data = &locomo_info, + }, .num_resources = ARRAY_SIZE(locomo_resources), .resource = locomo_resources, }; -- cgit v1.2.3-70-g09d2 From ed19b739c5c76ad241d30f6c6a5ee96fb284f4cf Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Fri, 11 Feb 2011 15:55:12 +0100 Subject: ARM: 6656/1: hw_breakpoint: avoid UNPREDICTABLE behaviour when reading DBGDSCR Reading baseline CP14 registers, other than DBGDIDR, when the OS Lock is set leads to UNPREDICTABLE behaviour. This patch ensures that we clear the OS lock before accessing anything other than the DBGDIDR, thereby avoiding this behaviour. Signed-off-by: Will Deacon Signed-off-by: Russell King --- arch/arm/kernel/hw_breakpoint.c | 26 +++++++++++++------------- 1 file changed, 13 insertions(+), 13 deletions(-) (limited to 'arch') diff --git a/arch/arm/kernel/hw_breakpoint.c b/arch/arm/kernel/hw_breakpoint.c index c9f3f046757..ab02d8aadb7 100644 --- a/arch/arm/kernel/hw_breakpoint.c +++ b/arch/arm/kernel/hw_breakpoint.c @@ -834,11 +834,11 @@ static void reset_ctrl_regs(void *unused) /* * v7 debug contains save and restore registers so that debug state - * can be maintained across low-power modes without leaving - * the debug logic powered up. It is IMPLEMENTATION DEFINED whether - * we can write to the debug registers out of reset, so we must - * unlock the OS Lock Access Register to avoid taking undefined - * instruction exceptions later on. + * can be maintained across low-power modes without leaving the debug + * logic powered up. It is IMPLEMENTATION DEFINED whether we can access + * the debug registers out of reset, so we must unlock the OS Lock + * Access Register to avoid taking undefined instruction exceptions + * later on. */ if (debug_arch >= ARM_DEBUG_ARCH_V7_ECP14) { /* @@ -899,18 +899,18 @@ static int __init arch_hw_breakpoint_init(void) pr_info("%d breakpoint(s) reserved for watchpoint " "single-step.\n", core_num_reserved_brps); + /* + * Reset the breakpoint resources. We assume that a halting + * debugger will leave the world in a nice state for us. + */ + on_each_cpu(reset_ctrl_regs, NULL, 1); + ARM_DBG_READ(c1, 0, dscr); if (dscr & ARM_DSCR_HDBGEN) { + max_watchpoint_len = 4; pr_warning("halting debug mode enabled. Assuming maximum " - "watchpoint size of 4 bytes."); + "watchpoint size of %u bytes.", max_watchpoint_len); } else { - /* - * Reset the breakpoint resources. We assume that a halting - * debugger will leave the world in a nice state for us. - */ - smp_call_function(reset_ctrl_regs, NULL, 1); - reset_ctrl_regs(NULL); - /* Work out the maximum supported watchpoint length. */ max_watchpoint_len = get_max_wp_len(); pr_info("maximum watchpoint size is %u bytes.\n", -- cgit v1.2.3-70-g09d2 From 66e1cfe6d52c69d317e9df76ebc8538a34af0d51 Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Fri, 11 Feb 2011 16:01:42 +0100 Subject: ARM: 6657/1: hw_breakpoint: fix ptrace breakpoint advertising on unsupported arch The ptrace debug information register was advertising breakpoint and watchpoint resources for unsupported debug architectures. This meant that setting breakpoints on these architectures would appear to succeed, although they would never fire in reality. This patch fixes the breakpoint slot probing so that it returns 0 when running on an unsupported debug architecture. Reported-by: Ulrich Weigand Signed-off-by: Will Deacon Signed-off-by: Russell King --- arch/arm/kernel/hw_breakpoint.c | 18 +++++++++++++----- 1 file changed, 13 insertions(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/arm/kernel/hw_breakpoint.c b/arch/arm/kernel/hw_breakpoint.c index ab02d8aadb7..d600bd35070 100644 --- a/arch/arm/kernel/hw_breakpoint.c +++ b/arch/arm/kernel/hw_breakpoint.c @@ -137,11 +137,10 @@ static u8 get_debug_arch(void) u32 didr; /* Do we implement the extended CPUID interface? */ - if (((read_cpuid_id() >> 16) & 0xf) != 0xf) { - pr_warning("CPUID feature registers not supported. " - "Assuming v6 debug is present.\n"); + if (WARN_ONCE((((read_cpuid_id() >> 16) & 0xf) != 0xf), + "CPUID feature registers not supported. " + "Assuming v6 debug is present.\n")) return ARM_DEBUG_ARCH_V6; - } ARM_DBG_READ(c0, 0, didr); return (didr >> 16) & 0xf; @@ -152,6 +151,12 @@ u8 arch_get_debug_arch(void) return debug_arch; } +static int debug_arch_supported(void) +{ + u8 arch = get_debug_arch(); + return arch >= ARM_DEBUG_ARCH_V6 && arch <= ARM_DEBUG_ARCH_V7_ECP14; +} + /* Determine number of BRP register available. */ static int get_num_brp_resources(void) { @@ -268,6 +273,9 @@ out: int hw_breakpoint_slots(int type) { + if (!debug_arch_supported()) + return 0; + /* * We can be called early, so don't rely on * our static variables being initialised. @@ -882,7 +890,7 @@ static int __init arch_hw_breakpoint_init(void) debug_arch = get_debug_arch(); - if (debug_arch > ARM_DEBUG_ARCH_V7_ECP14) { + if (!debug_arch_supported()) { pr_info("debug architecture 0x%x unsupported.\n", debug_arch); return 0; } -- cgit v1.2.3-70-g09d2 From d91309f69b7bdb64aeb30106fde8d18c5dd354b5 Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Fri, 11 Feb 2011 22:07:46 +0100 Subject: x86: Fix text_poke_smp_batch() deadlock Fix this deadlock - we are already holding the mutex: ======================================================= [ INFO: possible circular locking dependency detected ] 2.6.38-rc4-test+ #1 ------------------------------------------------------- bash/1850 is trying to acquire lock: (text_mutex){+.+.+.}, at: [] return_to_handler+0x0/0x2f but task is already holding lock: (smp_alt){+.+...}, at: [] return_to_handler+0x0/0x2f which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #2 (smp_alt){+.+...}: [] lock_acquire+0xcd/0xf8 [] __mutex_lock_common+0x4c/0x339 [] mutex_lock_nested+0x3e/0x43 [] alternatives_smp_switch+0x77/0x1d8 [] do_boot_cpu+0xd7/0x762 [] native_cpu_up+0xe6/0x16a [] _cpu_up+0x9d/0xee [] cpu_up+0xd3/0xe7 [] kernel_init+0xe8/0x20a [] kernel_thread_helper+0x4/0x10 -> #1 (cpu_hotplug.lock){+.+.+.}: [] lock_acquire+0xcd/0xf8 [] __mutex_lock_common+0x4c/0x339 [] mutex_lock_nested+0x3e/0x43 [] get_online_cpus+0x41/0x55 [] stop_machine+0x1e/0x3e [] text_poke_smp_batch+0x3a/0x3c [] arch_optimize_kprobes+0x10d/0x11c [] kprobe_optimizer+0x152/0x222 [] process_one_work+0x1d3/0x335 [] worker_thread+0x104/0x1a4 [] kthread+0x9d/0xa5 [] kernel_thread_helper+0x4/0x10 -> #0 (text_mutex){+.+.+.}: other info that might help us debug this: 6 locks held by bash/1850: #0: (&buffer->mutex){+.+.+.}, at: [] return_to_handler+0x0/0x2f #1: (s_active#75){.+.+.+}, at: [] return_to_handler+0x0/0x2f #2: (x86_cpu_hotplug_driver_mutex){+.+.+.}, at: [] return_to_handler+0x0/0x2f #3: (cpu_add_remove_lock){+.+.+.}, at: [] return_to_handler+0x0/0x2f #4: (cpu_hotplug.lock){+.+.+.}, at: [] return_to_handler+0x0/0x2f #5: (smp_alt){+.+...}, at: [] return_to_handler+0x0/0x2f stack backtrace: Pid: 1850, comm: bash Not tainted 2.6.38-rc4-test+ #1 Call Trace: [] print_circular_bug+0xa8/0xb7 [] mutex_lock_nested+0x3e/0x43 [] alternatives_smp_unlock+0x3d/0x93 [] alternatives_smp_switch+0x198/0x1d8 [] native_cpu_die+0x65/0x95 [] _cpu_down+0x13e/0x202 [] sysfs_write_file+0x108/0x144 [] vfs_write+0xac/0xff [] sys_write+0x4a/0x6e Reported-by: Steven Rostedt Tested-by: Steven Rostedt Signed-off-by: Peter Zijlstra Cc: mathieu.desnoyers@efficios.com Cc: rusty@rustcorp.com.au Cc: ananth@in.ibm.com Cc: masami.hiramatsu.pt@hitachi.com Cc: fweisbec@gmail.com Cc: jbeulich@novell.com Cc: jbaron@redhat.com Cc: mhiramat@redhat.com LKML-Reference: <1297458466.5226.93.camel@laptop> Signed-off-by: Ingo Molnar --- arch/x86/kernel/alternative.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/x86/kernel/alternative.c b/arch/x86/kernel/alternative.c index 123608531c8..7038b95d363 100644 --- a/arch/x86/kernel/alternative.c +++ b/arch/x86/kernel/alternative.c @@ -671,7 +671,7 @@ void __kprobes text_poke_smp_batch(struct text_poke_param *params, int n) atomic_set(&stop_machine_first, 1); wrote_text = 0; - stop_machine(stop_machine_text_poke, (void *)&tpp, NULL); + __stop_machine(stop_machine_text_poke, (void *)&tpp, NULL); } #if defined(CONFIG_DYNAMIC_FTRACE) || defined(HAVE_JUMP_LABEL) -- cgit v1.2.3-70-g09d2 From 5117348dea5e3ecbb785cfa1271386fb49332b41 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Sat, 12 Feb 2011 11:51:03 +0100 Subject: x86: Readd missing irq_to_desc() in fixup_irq() commit a3c08e5d(x86: Convert irq_chip access to new functions) accidentally zapped desc = irq_to_desc(irq); in the vector loop. So we lock some random irq descriptor. Add it back. Signed-off-by: Thomas Gleixner Cc: # .37 --- arch/x86/kernel/irq.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/x86/kernel/irq.c b/arch/x86/kernel/irq.c index 52945da52a9..387b6a0c9e8 100644 --- a/arch/x86/kernel/irq.c +++ b/arch/x86/kernel/irq.c @@ -367,7 +367,8 @@ void fixup_irqs(void) if (irr & (1 << (vector % 32))) { irq = __this_cpu_read(vector_irq[vector]); - data = irq_get_irq_data(irq); + desc = irq_to_desc(irq); + data = &desc->irq_data; raw_spin_lock(&desc->lock); if (data->chip->irq_retrigger) data->chip->irq_retrigger(data); -- cgit v1.2.3-70-g09d2 From 1c9d16e35911090dee3f9313e6af13af623d66ee Mon Sep 17 00:00:00 2001 From: Borislav Petkov Date: Fri, 11 Feb 2011 18:17:54 +0100 Subject: x86: Fix mwait_usable section mismatch We use it in non __cpuinit code now too so drop marker. Signed-off-by: Borislav Petkov LKML-Reference: <20110211171754.GA21047@aftab> Signed-off-by: Ingo Molnar --- arch/x86/include/asm/cpu.h | 2 +- arch/x86/kernel/process.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/x86/include/asm/cpu.h b/arch/x86/include/asm/cpu.h index 6e6e7558e70..4564c8e28a3 100644 --- a/arch/x86/include/asm/cpu.h +++ b/arch/x86/include/asm/cpu.h @@ -32,6 +32,6 @@ extern void arch_unregister_cpu(int); DECLARE_PER_CPU(int, cpu_state); -int __cpuinit mwait_usable(const struct cpuinfo_x86 *); +int mwait_usable(const struct cpuinfo_x86 *); #endif /* _ASM_X86_CPU_H */ diff --git a/arch/x86/kernel/process.c b/arch/x86/kernel/process.c index e764fc05d70..3c189e9accd 100644 --- a/arch/x86/kernel/process.c +++ b/arch/x86/kernel/process.c @@ -506,7 +506,7 @@ static void poll_idle(void) #define MWAIT_ECX_EXTENDED_INFO 0x01 #define MWAIT_EDX_C1 0xf0 -int __cpuinit mwait_usable(const struct cpuinfo_x86 *c) +int mwait_usable(const struct cpuinfo_x86 *c) { u32 eax, ebx, ecx, edx; -- cgit v1.2.3-70-g09d2 From 678301ecadec24ff77ab310eebf8a32ccddb1850 Mon Sep 17 00:00:00 2001 From: Paul Bolle Date: Mon, 14 Feb 2011 22:52:38 +0100 Subject: x86, ioapic: Don't warn about non-existing IOAPICs if we have none mp_find_ioapic() prints errors like: ERROR: Unable to locate IOAPIC for GSI 13 if it can't find the IOAPIC that manages that specific GSI. I see errors like that at every boot of a laptop that apparently doesn't have any IOAPICs. But if there are no IOAPICs it doesn't seem to be an error that none can be found. A solution that gets rid of this message is to directly return if nr_ioapics (still) is zero. (But keep returning -1 in that case, so nothing breaks from this change.) The call chain that generates this error is: pnpacpi_allocated_resource() case ACPI_RESOURCE_TYPE_IRQ: pnpacpi_parse_allocated_irqresource() acpi_get_override_irq() mp_find_ioapic() Signed-off-by: Paul Bolle Signed-off-by: Ingo Molnar --- arch/x86/kernel/apic/io_apic.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'arch') diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c index 697dc34b7b8..ca9e2a3545a 100644 --- a/arch/x86/kernel/apic/io_apic.c +++ b/arch/x86/kernel/apic/io_apic.c @@ -4002,6 +4002,9 @@ int mp_find_ioapic(u32 gsi) { int i = 0; + if (nr_ioapics == 0) + return -1; + /* Find the IOAPIC that manages this GSI. */ for (i = 0; i < nr_ioapics; i++) { if ((gsi >= mp_gsi_routing[i].gsi_base) -- cgit v1.2.3-70-g09d2 From 84e383b322e5348db03be54ff64cc6da87003717 Mon Sep 17 00:00:00 2001 From: Naga Chumbalkar Date: Mon, 14 Feb 2011 22:47:17 +0000 Subject: x86, dmi, debug: Log board name (when present) in dmesg/oops output The "Type 2" SMBIOS record that contains Board Name is not strictly required and may be absent in the SMBIOS on some platforms. ( Please note that Type 2 is not listed in Table 3 in Sec 6.2 ("Required Structures and Data") of the SMBIOS v2.7 Specification. ) Use the Manufacturer Name (aka System Vendor) name. Print Board Name only when it is present. Before the fix: (i) dmesg output: DMI: /ProLiant DL380 G6, BIOS P62 01/29/2011 (ii) oops output: Pid: 2170, comm: bash Not tainted 2.6.38-rc4+ #3 /ProLiant DL380 G6 After the fix: (i) dmesg output: DMI: HP ProLiant DL380 G6, BIOS P62 01/29/2011 (ii) oops output: Pid: 2278, comm: bash Not tainted 2.6.38-rc4+ #4 HP ProLiant DL380 G6 Signed-off-by: Naga Chumbalkar Reviewed-by: Bjorn Helgaas Cc: # .3x - good for debugging, please apply as far back as it applies cleanly LKML-Reference: <20110214224423.2182.13929.sendpatchset@nchumbalkar.americas.hpqcorp.net> Signed-off-by: Ingo Molnar --- arch/x86/kernel/process.c | 22 ++++++++++++++++------ drivers/firmware/dmi_scan.c | 11 +++++++++-- 2 files changed, 25 insertions(+), 8 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/process.c b/arch/x86/kernel/process.c index 3c189e9accd..ff455419898 100644 --- a/arch/x86/kernel/process.c +++ b/arch/x86/kernel/process.c @@ -92,21 +92,31 @@ void show_regs(struct pt_regs *regs) void show_regs_common(void) { - const char *board, *product; + const char *vendor, *product, *board; - board = dmi_get_system_info(DMI_BOARD_NAME); - if (!board) - board = ""; + vendor = dmi_get_system_info(DMI_SYS_VENDOR); + if (!vendor) + vendor = ""; product = dmi_get_system_info(DMI_PRODUCT_NAME); if (!product) product = ""; + /* Board Name is optional */ + board = dmi_get_system_info(DMI_BOARD_NAME); + printk(KERN_CONT "\n"); - printk(KERN_DEFAULT "Pid: %d, comm: %.20s %s %s %.*s %s/%s\n", + printk(KERN_DEFAULT "Pid: %d, comm: %.20s %s %s %.*s", current->pid, current->comm, print_tainted(), init_utsname()->release, (int)strcspn(init_utsname()->version, " "), - init_utsname()->version, board, product); + init_utsname()->version); + printk(KERN_CONT " "); + printk(KERN_CONT "%s %s", vendor, product); + if (board) { + printk(KERN_CONT "/"); + printk(KERN_CONT "%s", board); + } + printk(KERN_CONT "\n"); } void flush_thread(void) diff --git a/drivers/firmware/dmi_scan.c b/drivers/firmware/dmi_scan.c index e28e4166817..bcb1126e3d0 100644 --- a/drivers/firmware/dmi_scan.c +++ b/drivers/firmware/dmi_scan.c @@ -378,10 +378,17 @@ static void __init print_filtered(const char *info) static void __init dmi_dump_ids(void) { + const char *board; /* Board Name is optional */ + printk(KERN_DEBUG "DMI: "); - print_filtered(dmi_get_system_info(DMI_BOARD_NAME)); - printk(KERN_CONT "/"); + print_filtered(dmi_get_system_info(DMI_SYS_VENDOR)); + printk(KERN_CONT " "); print_filtered(dmi_get_system_info(DMI_PRODUCT_NAME)); + board = dmi_get_system_info(DMI_BOARD_NAME); + if (board) { + printk(KERN_CONT "/"); + print_filtered(board); + } printk(KERN_CONT ", BIOS "); print_filtered(dmi_get_system_info(DMI_BIOS_VERSION)); printk(KERN_CONT " "); -- cgit v1.2.3-70-g09d2 From 261cd298a8c363d7985e3482946edb4bfedacf98 Mon Sep 17 00:00:00 2001 From: Martin Schwidefsky Date: Tue, 15 Feb 2011 09:43:32 +0100 Subject: s390: remove task_show_regs task_show_regs used to be a debugging aid in the early bringup days of Linux on s390. /proc//status is a world readable file, it is not a good idea to show the registers of a process. The only correct fix is to remove task_show_regs. Reported-by: Al Viro Signed-off-by: Martin Schwidefsky Signed-off-by: Linus Torvalds --- arch/s390/include/asm/processor.h | 5 ----- arch/s390/kernel/traps.c | 37 ------------------------------------- fs/proc/array.c | 3 --- 3 files changed, 45 deletions(-) (limited to 'arch') diff --git a/arch/s390/include/asm/processor.h b/arch/s390/include/asm/processor.h index bf3de04170a..2c79b641627 100644 --- a/arch/s390/include/asm/processor.h +++ b/arch/s390/include/asm/processor.h @@ -148,11 +148,6 @@ extern int kernel_thread(int (*fn)(void *), void * arg, unsigned long flags); */ extern unsigned long thread_saved_pc(struct task_struct *t); -/* - * Print register of task into buffer. Used in fs/proc/array.c. - */ -extern void task_show_regs(struct seq_file *m, struct task_struct *task); - extern void show_code(struct pt_regs *regs); unsigned long get_wchan(struct task_struct *p); diff --git a/arch/s390/kernel/traps.c b/arch/s390/kernel/traps.c index 5eb78dd584c..b5a4a739b47 100644 --- a/arch/s390/kernel/traps.c +++ b/arch/s390/kernel/traps.c @@ -237,43 +237,6 @@ void show_regs(struct pt_regs *regs) show_last_breaking_event(regs); } -/* This is called from fs/proc/array.c */ -void task_show_regs(struct seq_file *m, struct task_struct *task) -{ - struct pt_regs *regs; - - regs = task_pt_regs(task); - seq_printf(m, "task: %p, ksp: %p\n", - task, (void *)task->thread.ksp); - seq_printf(m, "User PSW : %p %p\n", - (void *) regs->psw.mask, (void *)regs->psw.addr); - - seq_printf(m, "User GPRS: " FOURLONG, - regs->gprs[0], regs->gprs[1], - regs->gprs[2], regs->gprs[3]); - seq_printf(m, " " FOURLONG, - regs->gprs[4], regs->gprs[5], - regs->gprs[6], regs->gprs[7]); - seq_printf(m, " " FOURLONG, - regs->gprs[8], regs->gprs[9], - regs->gprs[10], regs->gprs[11]); - seq_printf(m, " " FOURLONG, - regs->gprs[12], regs->gprs[13], - regs->gprs[14], regs->gprs[15]); - seq_printf(m, "User ACRS: %08x %08x %08x %08x\n", - task->thread.acrs[0], task->thread.acrs[1], - task->thread.acrs[2], task->thread.acrs[3]); - seq_printf(m, " %08x %08x %08x %08x\n", - task->thread.acrs[4], task->thread.acrs[5], - task->thread.acrs[6], task->thread.acrs[7]); - seq_printf(m, " %08x %08x %08x %08x\n", - task->thread.acrs[8], task->thread.acrs[9], - task->thread.acrs[10], task->thread.acrs[11]); - seq_printf(m, " %08x %08x %08x %08x\n", - task->thread.acrs[12], task->thread.acrs[13], - task->thread.acrs[14], task->thread.acrs[15]); -} - static DEFINE_SPINLOCK(die_lock); void die(const char * str, struct pt_regs * regs, long err) diff --git a/fs/proc/array.c b/fs/proc/array.c index df2b703b9d0..7c99c1cf7e5 100644 --- a/fs/proc/array.c +++ b/fs/proc/array.c @@ -353,9 +353,6 @@ int proc_pid_status(struct seq_file *m, struct pid_namespace *ns, task_cap(m, task); task_cpus_allowed(m, task); cpuset_task_status_allowed(m, task); -#if defined(CONFIG_S390) - task_show_regs(m, task); -#endif task_context_switch_counts(m, task); return 0; } -- cgit v1.2.3-70-g09d2 From b62818e5ff78cab4daf04fc0c12f86475dbc4b69 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Tue, 15 Feb 2011 15:04:07 -0800 Subject: sparc64: Fix NMI startup bug which also breaks perf. Doing NMI startup as an early initcall doesn't work because we need to have SMP started up by then. So we'd only NMI startup one cpu, which causes perf PMU grab to BUG because the nmi_active count isn't what it's supposed to be. This also points out that we don't have proper CPU up/down notifiers for the NMI code which will need to be fixed at some point. Signed-off-by: David S. Miller --- arch/sparc/include/asm/pcr.h | 2 ++ arch/sparc/kernel/pcr.c | 2 -- arch/sparc/kernel/smp_64.c | 2 ++ 3 files changed, 4 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/sparc/include/asm/pcr.h b/arch/sparc/include/asm/pcr.h index a2f5c61f924..843e4faf6a5 100644 --- a/arch/sparc/include/asm/pcr.h +++ b/arch/sparc/include/asm/pcr.h @@ -43,4 +43,6 @@ static inline u64 picl_value(unsigned int nmi_hz) extern u64 pcr_enable; +extern int pcr_arch_init(void); + #endif /* __PCR_H */ diff --git a/arch/sparc/kernel/pcr.c b/arch/sparc/kernel/pcr.c index ae96cf52a95..7c2ced612b8 100644 --- a/arch/sparc/kernel/pcr.c +++ b/arch/sparc/kernel/pcr.c @@ -167,5 +167,3 @@ out_unregister: unregister_perf_hsvc(); return err; } - -early_initcall(pcr_arch_init); diff --git a/arch/sparc/kernel/smp_64.c b/arch/sparc/kernel/smp_64.c index b6a2b8f4704..555a76d1f4a 100644 --- a/arch/sparc/kernel/smp_64.c +++ b/arch/sparc/kernel/smp_64.c @@ -49,6 +49,7 @@ #include #include #include +#include #include "cpumap.h" @@ -1358,6 +1359,7 @@ void __cpu_die(unsigned int cpu) void __init smp_cpus_done(unsigned int max_cpus) { + pcr_arch_init(); } void smp_send_reschedule(int cpu) -- cgit v1.2.3-70-g09d2 From f9d693d237a173915fcfbd86b28753f93b7d142f Mon Sep 17 00:00:00 2001 From: Greg Ungerer Date: Thu, 3 Feb 2011 21:31:20 +1000 Subject: m68k: remove arch specific non-optimized memcmp() The m68k arch implements its own memcmp() function. It is not optimized in any way (it is the most strait forward coding of memcmp you can get). Remove it and use the kernels standard memcmp() implementation. This also goes part of the way to fixing a regression caused by commit ea61bc461d09e8d331a307916530aaae808c72a2 ("m68k/m68knommu: merge MMU and non-MMU string.h"), which breaks non-coldfire non-mmu builds (which is the 68x328 and 68360 families). They currently have no memcmp() function defined, since there is none in the m68knommu/lib functions. Signed-off-by: Greg Ungerer Acked-by: Geert Uytterhoeven --- arch/m68k/include/asm/string.h | 4 +--- arch/m68k/lib/string.c | 11 ----------- 2 files changed, 1 insertion(+), 14 deletions(-) (limited to 'arch') diff --git a/arch/m68k/include/asm/string.h b/arch/m68k/include/asm/string.h index 65b13128283..ffc3c3f6124 100644 --- a/arch/m68k/include/asm/string.h +++ b/arch/m68k/include/asm/string.h @@ -102,11 +102,9 @@ static inline int strcmp(const char *cs, const char *ct) #define __HAVE_ARCH_MEMMOVE extern void *memmove(void *, const void *, __kernel_size_t); +#endif /* CONFIG_COLDFIRE */ -#define __HAVE_ARCH_MEMCMP -extern int memcmp(const void *, const void *, __kernel_size_t); #define memcmp(d, s, n) __builtin_memcmp(d, s, n) -#endif /* CONFIG_COLDFIRE */ #define __HAVE_ARCH_MEMSET extern void *memset(void *, int, __kernel_size_t); diff --git a/arch/m68k/lib/string.c b/arch/m68k/lib/string.c index 4253f870e54..d399c5f2563 100644 --- a/arch/m68k/lib/string.c +++ b/arch/m68k/lib/string.c @@ -243,14 +243,3 @@ void *memmove(void *dest, const void *src, size_t n) return xdest; } EXPORT_SYMBOL(memmove); - -int memcmp(const void *cs, const void *ct, size_t count) -{ - const unsigned char *su1, *su2; - - for (su1 = cs, su2 = ct; count > 0; ++su1, ++su2, count--) - if (*su1 != *su2) - return *su1 < *su2 ? -1 : +1; - return 0; -} -EXPORT_SYMBOL(memcmp); -- cgit v1.2.3-70-g09d2 From 982cd252ca0b63c11fe398c09c6f2b41217c78c0 Mon Sep 17 00:00:00 2001 From: Greg Ungerer Date: Thu, 3 Feb 2011 21:58:39 +1000 Subject: m68knommu: add optimize memmove() function Add an m68k/coldfire optimized memmove() function for the m68knommu arch. This is the same function as used by m68k. Simple speed tests show this is faster once buffers are larger than 4 bytes, and significantly faster on much larger buffers (4 times faster above about 100 bytes). This also goes part of the way to fixing a regression caused by commit ea61bc461d09e8d331a307916530aaae808c72a2 ("m68k/m68knommu: merge MMU and non-MMU string.h"), which breaks non-coldfire non-mmu builds (which is the 68x328 and 68360 families). They currently have no memmove() fucntion defined, since there was none in the m68knommu/lib functions. Signed-off-by: Greg Ungerer --- arch/m68k/include/asm/string.h | 2 +- arch/m68knommu/lib/Makefile | 2 +- arch/m68knommu/lib/memmove.c | 105 +++++++++++++++++++++++++++++++++++++++++ 3 files changed, 107 insertions(+), 2 deletions(-) create mode 100644 arch/m68knommu/lib/memmove.c (limited to 'arch') diff --git a/arch/m68k/include/asm/string.h b/arch/m68k/include/asm/string.h index ffc3c3f6124..32198454da7 100644 --- a/arch/m68k/include/asm/string.h +++ b/arch/m68k/include/asm/string.h @@ -99,10 +99,10 @@ static inline int strcmp(const char *cs, const char *ct) : "+a" (cs), "+a" (ct), "=d" (res)); return res; } +#endif /* CONFIG_COLDFIRE */ #define __HAVE_ARCH_MEMMOVE extern void *memmove(void *, const void *, __kernel_size_t); -#endif /* CONFIG_COLDFIRE */ #define memcmp(d, s, n) __builtin_memcmp(d, s, n) diff --git a/arch/m68knommu/lib/Makefile b/arch/m68knommu/lib/Makefile index d94d709665a..32d852e586d 100644 --- a/arch/m68knommu/lib/Makefile +++ b/arch/m68knommu/lib/Makefile @@ -4,4 +4,4 @@ lib-y := ashldi3.o ashrdi3.o lshrdi3.o \ muldi3.o mulsi3.o divsi3.o udivsi3.o modsi3.o umodsi3.o \ - checksum.o memcpy.o memset.o delay.o + checksum.o memcpy.o memmove.o memset.o delay.o diff --git a/arch/m68knommu/lib/memmove.c b/arch/m68knommu/lib/memmove.c new file mode 100644 index 00000000000..b3dcfe9dab7 --- /dev/null +++ b/arch/m68knommu/lib/memmove.c @@ -0,0 +1,105 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file COPYING in the main directory of this archive + * for more details. + */ + +#define __IN_STRING_C + +#include +#include + +void *memmove(void *dest, const void *src, size_t n) +{ + void *xdest = dest; + size_t temp; + + if (!n) + return xdest; + + if (dest < src) { + if ((long)dest & 1) { + char *cdest = dest; + const char *csrc = src; + *cdest++ = *csrc++; + dest = cdest; + src = csrc; + n--; + } + if (n > 2 && (long)dest & 2) { + short *sdest = dest; + const short *ssrc = src; + *sdest++ = *ssrc++; + dest = sdest; + src = ssrc; + n -= 2; + } + temp = n >> 2; + if (temp) { + long *ldest = dest; + const long *lsrc = src; + temp--; + do + *ldest++ = *lsrc++; + while (temp--); + dest = ldest; + src = lsrc; + } + if (n & 2) { + short *sdest = dest; + const short *ssrc = src; + *sdest++ = *ssrc++; + dest = sdest; + src = ssrc; + } + if (n & 1) { + char *cdest = dest; + const char *csrc = src; + *cdest = *csrc; + } + } else { + dest = (char *)dest + n; + src = (const char *)src + n; + if ((long)dest & 1) { + char *cdest = dest; + const char *csrc = src; + *--cdest = *--csrc; + dest = cdest; + src = csrc; + n--; + } + if (n > 2 && (long)dest & 2) { + short *sdest = dest; + const short *ssrc = src; + *--sdest = *--ssrc; + dest = sdest; + src = ssrc; + n -= 2; + } + temp = n >> 2; + if (temp) { + long *ldest = dest; + const long *lsrc = src; + temp--; + do + *--ldest = *--lsrc; + while (temp--); + dest = ldest; + src = lsrc; + } + if (n & 2) { + short *sdest = dest; + const short *ssrc = src; + *--sdest = *--ssrc; + dest = sdest; + src = ssrc; + } + if (n & 1) { + char *cdest = dest; + const char *csrc = src; + *--cdest = *--csrc; + } + } + return xdest; +} +EXPORT_SYMBOL(memmove); -- cgit v1.2.3-70-g09d2 From b14769d94f697b118d960d7f73eb60ff7fa59af0 Mon Sep 17 00:00:00 2001 From: Greg Ungerer Date: Tue, 8 Feb 2011 14:40:44 +1000 Subject: m68knommu: fix mis-named variable int set_irq_chip loop MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Compiling for 68360 targets gives: CC arch/m68knommu/platform/68360/ints.o arch/m68knommu/platform/68360/ints.c: In function ‘init_IRQ’: arch/m68knommu/platform/68360/ints.c:135:16: error: ‘irq’ undeclared (first use in this function) arch/m68knommu/platform/68360/ints.c:135:16: note: each undeclared identifier is reported only once for each function it appears in Fix variable name used. Signed-off-by: Greg Ungerer --- arch/m68knommu/platform/68360/ints.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/m68knommu/platform/68360/ints.c b/arch/m68knommu/platform/68360/ints.c index ad96ab1051f..a29041c1a8a 100644 --- a/arch/m68knommu/platform/68360/ints.c +++ b/arch/m68knommu/platform/68360/ints.c @@ -132,8 +132,8 @@ void init_IRQ(void) pquicc->intr_cimr = 0x00000000; for (i = 0; (i < NR_IRQS); i++) { - set_irq_chip(irq, &intc_irq_chip); - set_irq_handler(irq, handle_level_irq); + set_irq_chip(i, &intc_irq_chip); + set_irq_handler(i, handle_level_irq); } } -- cgit v1.2.3-70-g09d2 From 81174262e2e653e15c7ef23efa5f88fe31e91e2a Mon Sep 17 00:00:00 2001 From: Greg Ungerer Date: Tue, 8 Feb 2011 14:45:59 +1000 Subject: m68knommu: add missing linker __modver section Add missing linker section __modver to fix: LD vmlinux /usr/local/bin/../m68k-uclinux/bin/ld.real: error: no memory region specified for loadable section `__modver' Signed-off-by: Greg Ungerer --- arch/m68knommu/kernel/vmlinux.lds.S | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'arch') diff --git a/arch/m68knommu/kernel/vmlinux.lds.S b/arch/m68knommu/kernel/vmlinux.lds.S index ef332136f96..47e15ebfd89 100644 --- a/arch/m68knommu/kernel/vmlinux.lds.S +++ b/arch/m68knommu/kernel/vmlinux.lds.S @@ -141,6 +141,12 @@ SECTIONS { *(__param) __stop___param = .; + /* Built-in module versions */ + . = ALIGN(4) ; + __start___modver = .; + *(__modver) + __stop___modver = .; + . = ALIGN(4) ; _etext = . ; } > TEXT -- cgit v1.2.3-70-g09d2 From 4531dab4294435d6f57ecd942831a79bab303287 Mon Sep 17 00:00:00 2001 From: Greg Ungerer Date: Tue, 8 Feb 2011 21:40:11 +1000 Subject: m68knommu: remove use of IRQ_FLG_LOCK from 68360 platform support The m68knommu arch does not define or use IRQ_FLG_LOCK in its irq subsystem. Remove obsolete use of it. Signed-off-by: Greg Ungerer --- arch/m68knommu/platform/68360/commproc.c | 2 +- arch/m68knommu/platform/68360/config.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/m68knommu/platform/68360/commproc.c b/arch/m68knommu/platform/68360/commproc.c index f27e688c404..8e4e10cc008 100644 --- a/arch/m68knommu/platform/68360/commproc.c +++ b/arch/m68knommu/platform/68360/commproc.c @@ -210,7 +210,7 @@ void cpm_install_handler(int vec, void (*handler)(), void *dev_id) { - request_irq(vec, handler, IRQ_FLG_LOCK, "timer", dev_id); + request_irq(vec, handler, 0, "timer", dev_id); /* if (cpm_vecs[vec].handler != 0) */ /* printk(KERN_INFO "CPM interrupt %x replacing %x\n", */ diff --git a/arch/m68knommu/platform/68360/config.c b/arch/m68knommu/platform/68360/config.c index ac629fa3009..9dd5bca3874 100644 --- a/arch/m68knommu/platform/68360/config.c +++ b/arch/m68knommu/platform/68360/config.c @@ -75,7 +75,7 @@ void hw_timer_init(void) /* Set compare register 32Khz / 32 / 10 = 100 */ TCMP = 10; - request_irq(IRQ_MACHSPEC | 1, timer_routine, IRQ_FLG_LOCK, "timer", NULL); + request_irq(IRQ_MACHSPEC | 1, timer_routine, 0, "timer", NULL); #endif /* General purpose quicc timers: MC68360UM p7-20 */ -- cgit v1.2.3-70-g09d2 From 86d306c96046be597147d9f8ff163a052b3845d8 Mon Sep 17 00:00:00 2001 From: Greg Ungerer Date: Wed, 9 Feb 2011 13:43:58 +1000 Subject: m68knommu: set flow handler for secondary interrupt controller of 5249 The secondary interrupt controller of the ColdFire 5249 code is not setting the edge triggered flow handler. Set it. Signed-off-by: Greg Ungerer --- arch/m68knommu/platform/5249/intc2.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/m68knommu/platform/5249/intc2.c b/arch/m68knommu/platform/5249/intc2.c index d09d9da0453..c5151f84659 100644 --- a/arch/m68knommu/platform/5249/intc2.c +++ b/arch/m68knommu/platform/5249/intc2.c @@ -50,8 +50,10 @@ static int __init mcf_intc2_init(void) int irq; /* GPIO interrupt sources */ - for (irq = MCFINTC2_GPIOIRQ0; (irq <= MCFINTC2_GPIOIRQ7); irq++) + for (irq = MCFINTC2_GPIOIRQ0; (irq <= MCFINTC2_GPIOIRQ7); irq++) { irq_desc[irq].chip = &intc2_irq_gpio_chip; + set_irq_handler(irq, handle_edge_irq); + } return 0; } -- cgit v1.2.3-70-g09d2 From df3ca747ebea6168059cd7ca7e1b3f65aae3bcc1 Mon Sep 17 00:00:00 2001 From: Kukjin Kim Date: Tue, 1 Feb 2011 16:26:33 +0900 Subject: ARM: S5PV310: Cleanup map.h file Signed-off-by: Kukjin Kim --- arch/arm/mach-s5pv310/include/mach/map.h | 149 +++++++++++++++---------------- 1 file changed, 73 insertions(+), 76 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-s5pv310/include/mach/map.h b/arch/arm/mach-s5pv310/include/mach/map.h index 3060f78e12a..901657fa7a1 100644 --- a/arch/arm/mach-s5pv310/include/mach/map.h +++ b/arch/arm/mach-s5pv310/include/mach/map.h @@ -1,6 +1,6 @@ /* linux/arch/arm/mach-s5pv310/include/mach/map.h * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. * http://www.samsung.com/ * * S5PV310 - Memory map definitions @@ -23,90 +23,43 @@ #include -#define S5PV310_PA_SYSRAM (0x02025000) +#define S5PV310_PA_SYSRAM 0x02025000 -#define S5PV310_PA_SROM_BANK(x) (0x04000000 + ((x) * 0x01000000)) - -#define S5PC210_PA_ONENAND (0x0C000000) -#define S5P_PA_ONENAND S5PC210_PA_ONENAND - -#define S5PC210_PA_ONENAND_DMA (0x0C600000) -#define S5P_PA_ONENAND_DMA S5PC210_PA_ONENAND_DMA - -#define S5PV310_PA_CHIPID (0x10000000) -#define S5P_PA_CHIPID S5PV310_PA_CHIPID - -#define S5PV310_PA_SYSCON (0x10010000) -#define S5P_PA_SYSCON S5PV310_PA_SYSCON +#define S5PV310_PA_I2S0 0x03830000 +#define S5PV310_PA_I2S1 0xE3100000 +#define S5PV310_PA_I2S2 0xE2A00000 -#define S5PV310_PA_PMU (0x10020000) +#define S5PV310_PA_PCM0 0x03840000 +#define S5PV310_PA_PCM1 0x13980000 +#define S5PV310_PA_PCM2 0x13990000 -#define S5PV310_PA_CMU (0x10030000) - -#define S5PV310_PA_WATCHDOG (0x10060000) -#define S5PV310_PA_RTC (0x10070000) - -#define S5PV310_PA_DMC0 (0x10400000) - -#define S5PV310_PA_COMBINER (0x10448000) - -#define S5PV310_PA_COREPERI (0x10500000) -#define S5PV310_PA_GIC_CPU (0x10500100) -#define S5PV310_PA_TWD (0x10500600) -#define S5PV310_PA_GIC_DIST (0x10501000) -#define S5PV310_PA_L2CC (0x10502000) - -/* DMA */ -#define S5PV310_PA_MDMA 0x10810000 -#define S5PV310_PA_PDMA0 0x12680000 -#define S5PV310_PA_PDMA1 0x12690000 - -#define S5PV310_PA_GPIO1 (0x11400000) -#define S5PV310_PA_GPIO2 (0x11000000) -#define S5PV310_PA_GPIO3 (0x03860000) - -#define S5PV310_PA_MIPI_CSIS0 0x11880000 -#define S5PV310_PA_MIPI_CSIS1 0x11890000 +#define S5PV310_PA_SROM_BANK(x) (0x04000000 + ((x) * 0x01000000)) -#define S5PV310_PA_HSMMC(x) (0x12510000 + ((x) * 0x10000)) +#define S5PC210_PA_ONENAND 0x0C000000 +#define S5PC210_PA_ONENAND_DMA 0x0C600000 -#define S5PV310_PA_SROMC (0x12570000) -#define S5P_PA_SROMC S5PV310_PA_SROMC +#define S5PV310_PA_CHIPID 0x10000000 -/* S/PDIF */ -#define S5PV310_PA_SPDIF 0xE1100000 +#define S5PV310_PA_SYSCON 0x10010000 +#define S5PV310_PA_PMU 0x10020000 +#define S5PV310_PA_CMU 0x10030000 -/* I2S */ -#define S5PV310_PA_I2S0 0x03830000 -#define S5PV310_PA_I2S1 0xE3100000 -#define S5PV310_PA_I2S2 0xE2A00000 +#define S5PV310_PA_WATCHDOG 0x10060000 +#define S5PV310_PA_RTC 0x10070000 -/* PCM */ -#define S5PV310_PA_PCM0 0x03840000 -#define S5PV310_PA_PCM1 0x13980000 -#define S5PV310_PA_PCM2 0x13990000 +#define S5PV310_PA_DMC0 0x10400000 -/* AC97 */ -#define S5PV310_PA_AC97 0x139A0000 +#define S5PV310_PA_COMBINER 0x10448000 -#define S5PV310_PA_UART (0x13800000) +#define S5PV310_PA_COREPERI 0x10500000 +#define S5PV310_PA_GIC_CPU 0x10500100 +#define S5PV310_PA_TWD 0x10500600 +#define S5PV310_PA_GIC_DIST 0x10501000 +#define S5PV310_PA_L2CC 0x10502000 -#define S5P_PA_UART(x) (S5PV310_PA_UART + ((x) * S3C_UART_OFFSET)) -#define S5P_PA_UART0 S5P_PA_UART(0) -#define S5P_PA_UART1 S5P_PA_UART(1) -#define S5P_PA_UART2 S5P_PA_UART(2) -#define S5P_PA_UART3 S5P_PA_UART(3) -#define S5P_PA_UART4 S5P_PA_UART(4) - -#define S5P_SZ_UART SZ_256 - -#define S5PV310_PA_IIC(x) (0x13860000 + ((x) * 0x10000)) - -#define S5PV310_PA_TIMER (0x139D0000) -#define S5P_PA_TIMER S5PV310_PA_TIMER - -#define S5PV310_PA_SDRAM (0x40000000) -#define S5P_PA_SDRAM S5PV310_PA_SDRAM +#define S5PV310_PA_MDMA 0x10810000 +#define S5PV310_PA_PDMA0 0x12680000 +#define S5PV310_PA_PDMA1 0x12690000 #define S5PV310_PA_SYSMMU_MDMA 0x10A40000 #define S5PV310_PA_SYSMMU_SSS 0x10A50000 @@ -125,8 +78,31 @@ #define S5PV310_PA_SYSMMU_MFC_L 0x13620000 #define S5PV310_PA_SYSMMU_MFC_R 0x13630000 -/* compatibiltiy defines. */ -#define S3C_PA_UART S5PV310_PA_UART +#define S5PV310_PA_GPIO1 0x11400000 +#define S5PV310_PA_GPIO2 0x11000000 +#define S5PV310_PA_GPIO3 0x03860000 + +#define S5PV310_PA_MIPI_CSIS0 0x11880000 +#define S5PV310_PA_MIPI_CSIS1 0x11890000 + +#define S5PV310_PA_HSMMC(x) (0x12510000 + ((x) * 0x10000)) + +#define S5PV310_PA_SROMC 0x12570000 + +#define S5PV310_PA_UART 0x13800000 + +#define S5PV310_PA_IIC(x) (0x13860000 + ((x) * 0x10000)) + +#define S5PV310_PA_AC97 0x139A0000 + +#define S5PV310_PA_TIMER 0x139D0000 + +#define S5PV310_PA_SDRAM 0x40000000 + +#define S5PV310_PA_SPDIF 0xE1100000 + +/* Compatibiltiy Defines */ + #define S3C_PA_HSMMC0 S5PV310_PA_HSMMC(0) #define S3C_PA_HSMMC1 S5PV310_PA_HSMMC(1) #define S3C_PA_HSMMC2 S5PV310_PA_HSMMC(2) @@ -141,7 +117,28 @@ #define S3C_PA_IIC7 S5PV310_PA_IIC(7) #define S3C_PA_RTC S5PV310_PA_RTC #define S3C_PA_WDT S5PV310_PA_WATCHDOG + +#define S5P_PA_CHIPID S5PV310_PA_CHIPID #define S5P_PA_MIPI_CSIS0 S5PV310_PA_MIPI_CSIS0 #define S5P_PA_MIPI_CSIS1 S5PV310_PA_MIPI_CSIS1 +#define S5P_PA_ONENAND S5PC210_PA_ONENAND +#define S5P_PA_ONENAND_DMA S5PC210_PA_ONENAND_DMA +#define S5P_PA_SDRAM S5PV310_PA_SDRAM +#define S5P_PA_SROMC S5PV310_PA_SROMC +#define S5P_PA_SYSCON S5PV310_PA_SYSCON +#define S5P_PA_TIMER S5PV310_PA_TIMER + +/* UART */ + +#define S3C_PA_UART S5PV310_PA_UART + +#define S5P_PA_UART(x) (S3C_PA_UART + ((x) * S3C_UART_OFFSET)) +#define S5P_PA_UART0 S5P_PA_UART(0) +#define S5P_PA_UART1 S5P_PA_UART(1) +#define S5P_PA_UART2 S5P_PA_UART(2) +#define S5P_PA_UART3 S5P_PA_UART(3) +#define S5P_PA_UART4 S5P_PA_UART(4) + +#define S5P_SZ_UART SZ_256 #endif /* __ASM_ARCH_MAP_H */ -- cgit v1.2.3-70-g09d2 From ece3410efc4286b512af77934860436992127bde Mon Sep 17 00:00:00 2001 From: Kukjin Kim Date: Tue, 1 Feb 2011 16:44:31 +0900 Subject: ARM: S5PV210: Cleanup map.h file Signed-off-by: Kukjin Kim --- arch/arm/mach-s5pv210/include/mach/map.h | 168 +++++++++++++++---------------- 1 file changed, 83 insertions(+), 85 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-s5pv210/include/mach/map.h b/arch/arm/mach-s5pv210/include/mach/map.h index 3611492ad68..1dd58836fd4 100644 --- a/arch/arm/mach-s5pv210/include/mach/map.h +++ b/arch/arm/mach-s5pv210/include/mach/map.h @@ -1,6 +1,6 @@ /* linux/arch/arm/mach-s5pv210/include/mach/map.h * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. * http://www.samsung.com/ * * S5PV210 - Memory map definitions @@ -16,122 +16,120 @@ #include #include -#define S5PV210_PA_SROM_BANK5 (0xA8000000) +#define S5PV210_PA_SDRAM 0x20000000 -#define S5PC110_PA_ONENAND (0xB0000000) -#define S5P_PA_ONENAND S5PC110_PA_ONENAND +#define S5PV210_PA_SROM_BANK5 0xA8000000 -#define S5PC110_PA_ONENAND_DMA (0xB0600000) -#define S5P_PA_ONENAND_DMA S5PC110_PA_ONENAND_DMA +#define S5PC110_PA_ONENAND 0xB0000000 +#define S5PC110_PA_ONENAND_DMA 0xB0600000 -#define S5PV210_PA_CHIPID (0xE0000000) -#define S5P_PA_CHIPID S5PV210_PA_CHIPID +#define S5PV210_PA_CHIPID 0xE0000000 -#define S5PV210_PA_SYSCON (0xE0100000) -#define S5P_PA_SYSCON S5PV210_PA_SYSCON +#define S5PV210_PA_SYSCON 0xE0100000 -#define S5PV210_PA_GPIO (0xE0200000) +#define S5PV210_PA_GPIO 0xE0200000 -/* SPI */ -#define S5PV210_PA_SPI0 0xE1300000 -#define S5PV210_PA_SPI1 0xE1400000 +#define S5PV210_PA_SPDIF 0xE1100000 -#define S5PV210_PA_KEYPAD (0xE1600000) +#define S5PV210_PA_SPI0 0xE1300000 +#define S5PV210_PA_SPI1 0xE1400000 -#define S5PV210_PA_IIC0 (0xE1800000) -#define S5PV210_PA_IIC1 (0xFAB00000) -#define S5PV210_PA_IIC2 (0xE1A00000) +#define S5PV210_PA_KEYPAD 0xE1600000 -#define S5PV210_PA_TIMER (0xE2500000) -#define S5P_PA_TIMER S5PV210_PA_TIMER +#define S5PV210_PA_ADC 0xE1700000 -#define S5PV210_PA_SYSTIMER (0xE2600000) +#define S5PV210_PA_IIC0 0xE1800000 +#define S5PV210_PA_IIC1 0xFAB00000 +#define S5PV210_PA_IIC2 0xE1A00000 -#define S5PV210_PA_WATCHDOG (0xE2700000) +#define S5PV210_PA_AC97 0xE2200000 -#define S5PV210_PA_RTC (0xE2800000) -#define S5PV210_PA_UART (0xE2900000) +#define S5PV210_PA_PCM0 0xE2300000 +#define S5PV210_PA_PCM1 0xE1200000 +#define S5PV210_PA_PCM2 0xE2B00000 -#define S5P_PA_UART0 (S5PV210_PA_UART + 0x0) -#define S5P_PA_UART1 (S5PV210_PA_UART + 0x400) -#define S5P_PA_UART2 (S5PV210_PA_UART + 0x800) -#define S5P_PA_UART3 (S5PV210_PA_UART + 0xC00) +#define S5PV210_PA_TIMER 0xE2500000 +#define S5PV210_PA_SYSTIMER 0xE2600000 +#define S5PV210_PA_WATCHDOG 0xE2700000 +#define S5PV210_PA_RTC 0xE2800000 -#define S5P_SZ_UART SZ_256 +#define S5PV210_PA_UART 0xE2900000 -#define S3C_VA_UARTx(x) (S3C_VA_UART + ((x) * S3C_UART_OFFSET)) +#define S5PV210_PA_SROMC 0xE8000000 -#define S5PV210_PA_SROMC (0xE8000000) -#define S5P_PA_SROMC S5PV210_PA_SROMC +#define S5PV210_PA_CFCON 0xE8200000 -#define S5PV210_PA_CFCON (0xE8200000) +#define S5PV210_PA_HSMMC(x) (0xEB000000 + ((x) * 0x100000)) -#define S5PV210_PA_MDMA 0xFA200000 -#define S5PV210_PA_PDMA0 0xE0900000 -#define S5PV210_PA_PDMA1 0xE0A00000 +#define S5PV210_PA_HSOTG 0xEC000000 +#define S5PV210_PA_HSPHY 0xEC100000 -#define S5PV210_PA_FB (0xF8000000) +#define S5PV210_PA_IIS0 0xEEE30000 +#define S5PV210_PA_IIS1 0xE2100000 +#define S5PV210_PA_IIS2 0xE2A00000 -#define S5PV210_PA_FIMC0 (0xFB200000) -#define S5PV210_PA_FIMC1 (0xFB300000) -#define S5PV210_PA_FIMC2 (0xFB400000) +#define S5PV210_PA_DMC0 0xF0000000 +#define S5PV210_PA_DMC1 0xF1400000 -#define S5PV210_PA_HSMMC(x) (0xEB000000 + ((x) * 0x100000)) +#define S5PV210_PA_VIC0 0xF2000000 +#define S5PV210_PA_VIC1 0xF2100000 +#define S5PV210_PA_VIC2 0xF2200000 +#define S5PV210_PA_VIC3 0xF2300000 -#define S5PV210_PA_HSOTG (0xEC000000) -#define S5PV210_PA_HSPHY (0xEC100000) +#define S5PV210_PA_FB 0xF8000000 -#define S5PV210_PA_VIC0 (0xF2000000) -#define S5PV210_PA_VIC1 (0xF2100000) -#define S5PV210_PA_VIC2 (0xF2200000) -#define S5PV210_PA_VIC3 (0xF2300000) +#define S5PV210_PA_MDMA 0xFA200000 +#define S5PV210_PA_PDMA0 0xE0900000 +#define S5PV210_PA_PDMA1 0xE0A00000 -#define S5PV210_PA_SDRAM (0x20000000) -#define S5P_PA_SDRAM S5PV210_PA_SDRAM +#define S5PV210_PA_MIPI_CSIS 0xFA600000 -/* S/PDIF */ -#define S5PV210_PA_SPDIF 0xE1100000 +#define S5PV210_PA_FIMC0 0xFB200000 +#define S5PV210_PA_FIMC1 0xFB300000 +#define S5PV210_PA_FIMC2 0xFB400000 -/* I2S */ -#define S5PV210_PA_IIS0 0xEEE30000 -#define S5PV210_PA_IIS1 0xE2100000 -#define S5PV210_PA_IIS2 0xE2A00000 +/* Compatibiltiy Defines */ -/* PCM */ -#define S5PV210_PA_PCM0 0xE2300000 -#define S5PV210_PA_PCM1 0xE1200000 -#define S5PV210_PA_PCM2 0xE2B00000 +#define S3C_PA_FB S5PV210_PA_FB +#define S3C_PA_HSMMC0 S5PV210_PA_HSMMC(0) +#define S3C_PA_HSMMC1 S5PV210_PA_HSMMC(1) +#define S3C_PA_HSMMC2 S5PV210_PA_HSMMC(2) +#define S3C_PA_HSMMC3 S5PV210_PA_HSMMC(3) +#define S3C_PA_IIC S5PV210_PA_IIC0 +#define S3C_PA_IIC1 S5PV210_PA_IIC1 +#define S3C_PA_IIC2 S5PV210_PA_IIC2 +#define S3C_PA_RTC S5PV210_PA_RTC +#define S3C_PA_USB_HSOTG S5PV210_PA_HSOTG +#define S3C_PA_WDT S5PV210_PA_WATCHDOG -/* AC97 */ -#define S5PV210_PA_AC97 0xE2200000 +#define S5P_PA_CHIPID S5PV210_PA_CHIPID +#define S5P_PA_FIMC0 S5PV210_PA_FIMC0 +#define S5P_PA_FIMC1 S5PV210_PA_FIMC1 +#define S5P_PA_FIMC2 S5PV210_PA_FIMC2 +#define S5P_PA_MIPI_CSIS0 S5PV210_PA_MIPI_CSIS +#define S5P_PA_ONENAND S5PC110_PA_ONENAND +#define S5P_PA_ONENAND_DMA S5PC110_PA_ONENAND_DMA +#define S5P_PA_SDRAM S5PV210_PA_SDRAM +#define S5P_PA_SROMC S5PV210_PA_SROMC +#define S5P_PA_SYSCON S5PV210_PA_SYSCON +#define S5P_PA_TIMER S5PV210_PA_TIMER -#define S5PV210_PA_ADC (0xE1700000) +#define SAMSUNG_PA_ADC S5PV210_PA_ADC +#define SAMSUNG_PA_CFCON S5PV210_PA_CFCON +#define SAMSUNG_PA_KEYPAD S5PV210_PA_KEYPAD -#define S5PV210_PA_DMC0 (0xF0000000) -#define S5PV210_PA_DMC1 (0xF1400000) +/* UART */ -#define S5PV210_PA_MIPI_CSIS 0xFA600000 +#define S3C_VA_UARTx(x) (S3C_VA_UART + ((x) * S3C_UART_OFFSET)) -/* compatibiltiy defines. */ -#define S3C_PA_UART S5PV210_PA_UART -#define S3C_PA_HSMMC0 S5PV210_PA_HSMMC(0) -#define S3C_PA_HSMMC1 S5PV210_PA_HSMMC(1) -#define S3C_PA_HSMMC2 S5PV210_PA_HSMMC(2) -#define S3C_PA_HSMMC3 S5PV210_PA_HSMMC(3) -#define S3C_PA_IIC S5PV210_PA_IIC0 -#define S3C_PA_IIC1 S5PV210_PA_IIC1 -#define S3C_PA_IIC2 S5PV210_PA_IIC2 -#define S3C_PA_FB S5PV210_PA_FB -#define S3C_PA_RTC S5PV210_PA_RTC -#define S3C_PA_WDT S5PV210_PA_WATCHDOG -#define S3C_PA_USB_HSOTG S5PV210_PA_HSOTG -#define S5P_PA_FIMC0 S5PV210_PA_FIMC0 -#define S5P_PA_FIMC1 S5PV210_PA_FIMC1 -#define S5P_PA_FIMC2 S5PV210_PA_FIMC2 -#define S5P_PA_MIPI_CSIS0 S5PV210_PA_MIPI_CSIS +#define S3C_PA_UART S5PV210_PA_UART -#define SAMSUNG_PA_ADC S5PV210_PA_ADC -#define SAMSUNG_PA_CFCON S5PV210_PA_CFCON -#define SAMSUNG_PA_KEYPAD S5PV210_PA_KEYPAD +#define S5P_PA_UART(x) (S3C_PA_UART + ((x) * S3C_UART_OFFSET)) +#define S5P_PA_UART0 S5P_PA_UART(0) +#define S5P_PA_UART1 S5P_PA_UART(1) +#define S5P_PA_UART2 S5P_PA_UART(2) +#define S5P_PA_UART3 S5P_PA_UART(3) + +#define S5P_SZ_UART SZ_256 #endif /* __ASM_ARCH_MAP_H */ -- cgit v1.2.3-70-g09d2 From 5180f5e036574cb71cbd366fb5e94aac454ce771 Mon Sep 17 00:00:00 2001 From: Kukjin Kim Date: Tue, 1 Feb 2011 17:48:35 +0900 Subject: ARM: S5PC100: Clenaup map.h file Signed-off-by: Kukjin Kim --- arch/arm/mach-s5pc100/include/mach/map.h | 193 +++++++++++++------------------ 1 file changed, 83 insertions(+), 110 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-s5pc100/include/mach/map.h b/arch/arm/mach-s5pc100/include/mach/map.h index 328467b346a..ccbe6b767f7 100644 --- a/arch/arm/mach-s5pc100/include/mach/map.h +++ b/arch/arm/mach-s5pc100/include/mach/map.h @@ -1,4 +1,7 @@ /* linux/arch/arm/mach-s5pc100/include/mach/map.h + * + * Copyright (c) 2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ * * Copyright 2009 Samsung Electronics Co. * Byungho Min @@ -16,145 +19,115 @@ #include #include -/* - * map-base.h has already defined virtual memory address - * S3C_VA_IRQ S3C_ADDR(0x00000000) irq controller(s) - * S3C_VA_SYS S3C_ADDR(0x00100000) system control - * S3C_VA_MEM S3C_ADDR(0x00200000) system control (not used) - * S3C_VA_TIMER S3C_ADDR(0x00300000) timer block - * S3C_VA_WATCHDOG S3C_ADDR(0x00400000) watchdog - * S3C_VA_UART S3C_ADDR(0x01000000) UART - * - * S5PC100 specific virtual memory address can be defined here - * S5PC1XX_VA_GPIO S3C_ADDR(0x00500000) GPIO - * - */ +#define S5PC100_PA_SDRAM 0x20000000 + +#define S5PC100_PA_ONENAND 0xE7100000 +#define S5PC100_PA_ONENAND_BUF 0xB0000000 + +#define S5PC100_PA_CHIPID 0xE0000000 -#define S5PC100_PA_ONENAND_BUF (0xB0000000) -#define S5PC100_SZ_ONENAND_BUF (SZ_256M - SZ_32M) +#define S5PC100_PA_SYSCON 0xE0100000 -/* Chip ID */ +#define S5PC100_PA_OTHERS 0xE0200000 -#define S5PC100_PA_CHIPID (0xE0000000) -#define S5P_PA_CHIPID S5PC100_PA_CHIPID +#define S5PC100_PA_GPIO 0xE0300000 -#define S5PC100_PA_SYSCON (0xE0100000) -#define S5P_PA_SYSCON S5PC100_PA_SYSCON +#define S5PC100_PA_VIC0 0xE4000000 +#define S5PC100_PA_VIC1 0xE4100000 +#define S5PC100_PA_VIC2 0xE4200000 -#define S5PC100_PA_OTHERS (0xE0200000) -#define S5PC100_VA_OTHERS (S3C_VA_SYS + 0x10000) +#define S5PC100_PA_SROMC 0xE7000000 -#define S5PC100_PA_GPIO (0xE0300000) -#define S5PC1XX_VA_GPIO S3C_ADDR(0x00500000) +#define S5PC100_PA_CFCON 0xE7800000 -/* Interrupt */ -#define S5PC100_PA_VIC0 (0xE4000000) -#define S5PC100_PA_VIC1 (0xE4100000) -#define S5PC100_PA_VIC2 (0xE4200000) -#define S5PC100_VA_VIC S3C_VA_IRQ -#define S5PC100_VA_VIC_OFFSET 0x10000 -#define S5PC1XX_VA_VIC(x) (S5PC100_VA_VIC + ((x) * S5PC100_VA_VIC_OFFSET)) +#define S5PC100_PA_MDMA 0xE8100000 +#define S5PC100_PA_PDMA0 0xE9000000 +#define S5PC100_PA_PDMA1 0xE9200000 -#define S5PC100_PA_SROMC (0xE7000000) -#define S5P_PA_SROMC S5PC100_PA_SROMC +#define S5PC100_PA_TIMER 0xEA000000 +#define S5PC100_PA_SYSTIMER 0xEA100000 +#define S5PC100_PA_WATCHDOG 0xEA200000 +#define S5PC100_PA_RTC 0xEA300000 -#define S5PC100_PA_ONENAND (0xE7100000) +#define S5PC100_PA_UART 0xEC000000 -#define S5PC100_PA_CFCON (0xE7800000) +#define S5PC100_PA_IIC0 0xEC100000 +#define S5PC100_PA_IIC1 0xEC200000 -/* DMA */ -#define S5PC100_PA_MDMA (0xE8100000) -#define S5PC100_PA_PDMA0 (0xE9000000) -#define S5PC100_PA_PDMA1 (0xE9200000) +#define S5PC100_PA_SPI0 0xEC300000 +#define S5PC100_PA_SPI1 0xEC400000 +#define S5PC100_PA_SPI2 0xEC500000 -/* Timer */ -#define S5PC100_PA_TIMER (0xEA000000) -#define S5P_PA_TIMER S5PC100_PA_TIMER +#define S5PC100_PA_USB_HSOTG 0xED200000 +#define S5PC100_PA_USB_HSPHY 0xED300000 -#define S5PC100_PA_SYSTIMER (0xEA100000) +#define S5PC100_PA_HSMMC(x) (0xED800000 + ((x) * 0x100000)) -#define S5PC100_PA_WATCHDOG (0xEA200000) -#define S5PC100_PA_RTC (0xEA300000) +#define S5PC100_PA_FB 0xEE000000 -#define S5PC100_PA_UART (0xEC000000) +#define S5PC100_PA_FIMC0 0xEE200000 +#define S5PC100_PA_FIMC1 0xEE300000 +#define S5PC100_PA_FIMC2 0xEE400000 -#define S5P_PA_UART0 (S5PC100_PA_UART + 0x0) -#define S5P_PA_UART1 (S5PC100_PA_UART + 0x400) -#define S5P_PA_UART2 (S5PC100_PA_UART + 0x800) -#define S5P_PA_UART3 (S5PC100_PA_UART + 0xC00) -#define S5P_SZ_UART SZ_256 +#define S5PC100_PA_I2S0 0xF2000000 +#define S5PC100_PA_I2S1 0xF2100000 +#define S5PC100_PA_I2S2 0xF2200000 -#define S5PC100_PA_IIC0 (0xEC100000) -#define S5PC100_PA_IIC1 (0xEC200000) +#define S5PC100_PA_AC97 0xF2300000 -/* SPI */ -#define S5PC100_PA_SPI0 0xEC300000 -#define S5PC100_PA_SPI1 0xEC400000 -#define S5PC100_PA_SPI2 0xEC500000 +#define S5PC100_PA_PCM0 0xF2400000 +#define S5PC100_PA_PCM1 0xF2500000 -/* USB HS OTG */ -#define S5PC100_PA_USB_HSOTG (0xED200000) -#define S5PC100_PA_USB_HSPHY (0xED300000) +#define S5PC100_PA_SPDIF 0xF2600000 -#define S5PC100_PA_FB (0xEE000000) +#define S5PC100_PA_TSADC 0xF3000000 -#define S5PC100_PA_FIMC0 (0xEE200000) -#define S5PC100_PA_FIMC1 (0xEE300000) -#define S5PC100_PA_FIMC2 (0xEE400000) +#define S5PC100_PA_KEYPAD 0xF3100000 -#define S5PC100_PA_I2S0 (0xF2000000) -#define S5PC100_PA_I2S1 (0xF2100000) -#define S5PC100_PA_I2S2 (0xF2200000) +/* Compatibiltiy Defines */ -#define S5PC100_PA_AC97 0xF2300000 +#define S3C_PA_FB S5PC100_PA_FB +#define S3C_PA_HSMMC0 S5PC100_PA_HSMMC(0) +#define S3C_PA_HSMMC1 S5PC100_PA_HSMMC(1) +#define S3C_PA_HSMMC2 S5PC100_PA_HSMMC(2) +#define S3C_PA_IIC S5PC100_PA_IIC0 +#define S3C_PA_IIC1 S5PC100_PA_IIC1 +#define S3C_PA_KEYPAD S5PC100_PA_KEYPAD +#define S3C_PA_ONENAND S5PC100_PA_ONENAND +#define S3C_PA_ONENAND_BUF S5PC100_PA_ONENAND_BUF +#define S3C_PA_RTC S5PC100_PA_RTC +#define S3C_PA_TSADC S5PC100_PA_TSADC +#define S3C_PA_USB_HSOTG S5PC100_PA_USB_HSOTG +#define S3C_PA_USB_HSPHY S5PC100_PA_USB_HSPHY +#define S3C_PA_WDT S5PC100_PA_WATCHDOG -/* PCM */ -#define S5PC100_PA_PCM0 0xF2400000 -#define S5PC100_PA_PCM1 0xF2500000 +#define S5P_PA_CHIPID S5PC100_PA_CHIPID +#define S5P_PA_FIMC0 S5PC100_PA_FIMC0 +#define S5P_PA_FIMC1 S5PC100_PA_FIMC1 +#define S5P_PA_FIMC2 S5PC100_PA_FIMC2 +#define S5P_PA_SDRAM S5PC100_PA_SDRAM +#define S5P_PA_SROMC S5PC100_PA_SROMC +#define S5P_PA_SYSCON S5PC100_PA_SYSCON +#define S5P_PA_TIMER S5PC100_PA_TIMER -#define S5PC100_PA_SPDIF 0xF2600000 +#define SAMSUNG_PA_ADC S5PC100_PA_TSADC +#define SAMSUNG_PA_CFCON S5PC100_PA_CFCON +#define SAMSUNG_PA_KEYPAD S5PC100_PA_KEYPAD -#define S5PC100_PA_TSADC (0xF3000000) +#define S5PC100_VA_OTHERS (S3C_VA_SYS + 0x10000) -/* KEYPAD */ -#define S5PC100_PA_KEYPAD (0xF3100000) +#define S3C_SZ_ONENAND_BUF (SZ_256M - SZ_32M) -#define S5PC100_PA_HSMMC(x) (0xED800000 + ((x) * 0x100000)) +/* UART */ -#define S5PC100_PA_SDRAM (0x20000000) -#define S5P_PA_SDRAM S5PC100_PA_SDRAM +#define S3C_PA_UART S5PC100_PA_UART -/* compatibiltiy defines. */ -#define S3C_PA_UART S5PC100_PA_UART -#define S3C_PA_IIC S5PC100_PA_IIC0 -#define S3C_PA_IIC1 S5PC100_PA_IIC1 -#define S3C_PA_FB S5PC100_PA_FB -#define S3C_PA_G2D S5PC100_PA_G2D -#define S3C_PA_G3D S5PC100_PA_G3D -#define S3C_PA_JPEG S5PC100_PA_JPEG -#define S3C_PA_ROTATOR S5PC100_PA_ROTATOR -#define S5P_VA_VIC0 S5PC1XX_VA_VIC(0) -#define S5P_VA_VIC1 S5PC1XX_VA_VIC(1) -#define S5P_VA_VIC2 S5PC1XX_VA_VIC(2) -#define S3C_PA_USB_HSOTG S5PC100_PA_USB_HSOTG -#define S3C_PA_USB_HSPHY S5PC100_PA_USB_HSPHY -#define S3C_PA_HSMMC0 S5PC100_PA_HSMMC(0) -#define S3C_PA_HSMMC1 S5PC100_PA_HSMMC(1) -#define S3C_PA_HSMMC2 S5PC100_PA_HSMMC(2) -#define S3C_PA_KEYPAD S5PC100_PA_KEYPAD -#define S3C_PA_WDT S5PC100_PA_WATCHDOG -#define S3C_PA_TSADC S5PC100_PA_TSADC -#define S3C_PA_ONENAND S5PC100_PA_ONENAND -#define S3C_PA_ONENAND_BUF S5PC100_PA_ONENAND_BUF -#define S3C_SZ_ONENAND_BUF S5PC100_SZ_ONENAND_BUF -#define S3C_PA_RTC S5PC100_PA_RTC - -#define SAMSUNG_PA_ADC S5PC100_PA_TSADC -#define SAMSUNG_PA_CFCON S5PC100_PA_CFCON -#define SAMSUNG_PA_KEYPAD S5PC100_PA_KEYPAD +#define S5P_PA_UART(x) (S3C_PA_UART + ((x) * S3C_UART_OFFSET)) +#define S5P_PA_UART0 S5P_PA_UART(0) +#define S5P_PA_UART1 S5P_PA_UART(1) +#define S5P_PA_UART2 S5P_PA_UART(2) +#define S5P_PA_UART3 S5P_PA_UART(3) -#define S5P_PA_FIMC0 S5PC100_PA_FIMC0 -#define S5P_PA_FIMC1 S5PC100_PA_FIMC1 -#define S5P_PA_FIMC2 S5PC100_PA_FIMC2 +#define S5P_SZ_UART SZ_256 -#endif /* __ASM_ARCH_C100_MAP_H */ +#endif /* __ASM_ARCH_MAP_H */ -- cgit v1.2.3-70-g09d2 From d76b782775f1a9e5cd20eabe95e49ba9e03415b0 Mon Sep 17 00:00:00 2001 From: Kukjin Kim Date: Thu, 10 Feb 2011 10:56:18 +0900 Subject: ARM: S5P6442: Cleanup map.h file Signed-off-by: Kukjin Kim --- arch/arm/mach-s5p6442/include/mach/map.h | 69 +++++++++++++++++--------------- 1 file changed, 37 insertions(+), 32 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-s5p6442/include/mach/map.h b/arch/arm/mach-s5p6442/include/mach/map.h index 203dd5a18bd..058dab4482a 100644 --- a/arch/arm/mach-s5p6442/include/mach/map.h +++ b/arch/arm/mach-s5p6442/include/mach/map.h @@ -1,6 +1,6 @@ /* linux/arch/arm/mach-s5p6442/include/mach/map.h * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. * http://www.samsung.com/ * * S5P6442 - Memory map definitions @@ -16,56 +16,61 @@ #include #include -#define S5P6442_PA_CHIPID (0xE0000000) -#define S5P_PA_CHIPID S5P6442_PA_CHIPID +#define S5P6442_PA_SDRAM 0x20000000 -#define S5P6442_PA_SYSCON (0xE0100000) -#define S5P_PA_SYSCON S5P6442_PA_SYSCON +#define S5P6442_PA_I2S0 0xC0B00000 +#define S5P6442_PA_I2S1 0xF2200000 -#define S5P6442_PA_GPIO (0xE0200000) +#define S5P6442_PA_CHIPID 0xE0000000 -#define S5P6442_PA_VIC0 (0xE4000000) -#define S5P6442_PA_VIC1 (0xE4100000) -#define S5P6442_PA_VIC2 (0xE4200000) +#define S5P6442_PA_SYSCON 0xE0100000 -#define S5P6442_PA_SROMC (0xE7000000) -#define S5P_PA_SROMC S5P6442_PA_SROMC +#define S5P6442_PA_GPIO 0xE0200000 -#define S5P6442_PA_MDMA 0xE8000000 -#define S5P6442_PA_PDMA 0xE9000000 +#define S5P6442_PA_VIC0 0xE4000000 +#define S5P6442_PA_VIC1 0xE4100000 +#define S5P6442_PA_VIC2 0xE4200000 -#define S5P6442_PA_TIMER (0xEA000000) -#define S5P_PA_TIMER S5P6442_PA_TIMER +#define S5P6442_PA_SROMC 0xE7000000 -#define S5P6442_PA_SYSTIMER (0xEA100000) +#define S5P6442_PA_MDMA 0xE8000000 +#define S5P6442_PA_PDMA 0xE9000000 -#define S5P6442_PA_WATCHDOG (0xEA200000) +#define S5P6442_PA_TIMER 0xEA000000 -#define S5P6442_PA_UART (0xEC000000) +#define S5P6442_PA_SYSTIMER 0xEA100000 -#define S5P_PA_UART0 (S5P6442_PA_UART + 0x0) -#define S5P_PA_UART1 (S5P6442_PA_UART + 0x400) -#define S5P_PA_UART2 (S5P6442_PA_UART + 0x800) -#define S5P_SZ_UART SZ_256 +#define S5P6442_PA_WATCHDOG 0xEA200000 -#define S5P6442_PA_IIC0 (0xEC100000) +#define S5P6442_PA_UART 0xEC000000 -#define S5P6442_PA_SDRAM (0x20000000) -#define S5P_PA_SDRAM S5P6442_PA_SDRAM +#define S5P6442_PA_IIC0 0xEC100000 #define S5P6442_PA_SPI 0xEC300000 -/* I2S */ -#define S5P6442_PA_I2S0 0xC0B00000 -#define S5P6442_PA_I2S1 0xF2200000 - -/* PCM */ #define S5P6442_PA_PCM0 0xF2400000 #define S5P6442_PA_PCM1 0xF2500000 -/* compatibiltiy defines. */ +/* Compatibiltiy Defines */ + +#define S3C_PA_IIC S5P6442_PA_IIC0 #define S3C_PA_WDT S5P6442_PA_WATCHDOG + +#define S5P_PA_CHIPID S5P6442_PA_CHIPID +#define S5P_PA_SDRAM S5P6442_PA_SDRAM +#define S5P_PA_SROMC S5P6442_PA_SROMC +#define S5P_PA_SYSCON S5P6442_PA_SYSCON +#define S5P_PA_TIMER S5P6442_PA_TIMER + +/* UART */ + #define S3C_PA_UART S5P6442_PA_UART -#define S3C_PA_IIC S5P6442_PA_IIC0 + +#define S5P_PA_UART(x) (S3C_PA_UART + ((x) * S3C_UART_OFFSET)) +#define S5P_PA_UART0 S5P_PA_UART(0) +#define S5P_PA_UART1 S5P_PA_UART(1) +#define S5P_PA_UART2 S5P_PA_UART(2) + +#define S5P_SZ_UART SZ_256 #endif /* __ASM_ARCH_MAP_H */ -- cgit v1.2.3-70-g09d2 From ede38875b4c3cf069eab49f4427a07333fcaae11 Mon Sep 17 00:00:00 2001 From: Kukjin Kim Date: Thu, 10 Feb 2011 10:57:03 +0900 Subject: ARM: S5P64X0: Cleanup map.h file Signed-off-by: Kukjin Kim --- arch/arm/mach-s5p64x0/include/mach/map.h | 83 ++++++++++++++++---------------- 1 file changed, 42 insertions(+), 41 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-s5p64x0/include/mach/map.h b/arch/arm/mach-s5p64x0/include/mach/map.h index a9365e5ba61..95c91257c7c 100644 --- a/arch/arm/mach-s5p64x0/include/mach/map.h +++ b/arch/arm/mach-s5p64x0/include/mach/map.h @@ -1,6 +1,6 @@ /* linux/arch/arm/mach-s5p64x0/include/mach/map.h * - * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd. + * Copyright (c) 2009-2011 Samsung Electronics Co., Ltd. * http://www.samsung.com * * S5P64X0 - Memory map definitions @@ -16,64 +16,46 @@ #include #include -#define S5P64X0_PA_SDRAM (0x20000000) +#define S5P64X0_PA_SDRAM 0x20000000 -#define S5P64X0_PA_CHIPID (0xE0000000) -#define S5P_PA_CHIPID S5P64X0_PA_CHIPID - -#define S5P64X0_PA_SYSCON (0xE0100000) -#define S5P_PA_SYSCON S5P64X0_PA_SYSCON - -#define S5P64X0_PA_GPIO (0xE0308000) - -#define S5P64X0_PA_VIC0 (0xE4000000) -#define S5P64X0_PA_VIC1 (0xE4100000) +#define S5P64X0_PA_CHIPID 0xE0000000 -#define S5P64X0_PA_SROMC (0xE7000000) -#define S5P_PA_SROMC S5P64X0_PA_SROMC - -#define S5P64X0_PA_PDMA (0xE9000000) - -#define S5P64X0_PA_TIMER (0xEA000000) -#define S5P_PA_TIMER S5P64X0_PA_TIMER +#define S5P64X0_PA_SYSCON 0xE0100000 -#define S5P64X0_PA_RTC (0xEA100000) +#define S5P64X0_PA_GPIO 0xE0308000 -#define S5P64X0_PA_WDT (0xEA200000) +#define S5P64X0_PA_VIC0 0xE4000000 +#define S5P64X0_PA_VIC1 0xE4100000 -#define S5P6440_PA_UART(x) (0xEC000000 + ((x) * S3C_UART_OFFSET)) -#define S5P6450_PA_UART(x) ((x < 5) ? (0xEC800000 + ((x) * S3C_UART_OFFSET)) : (0xEC000000)) +#define S5P64X0_PA_SROMC 0xE7000000 -#define S5P_PA_UART0 S5P6450_PA_UART(0) -#define S5P_PA_UART1 S5P6450_PA_UART(1) -#define S5P_PA_UART2 S5P6450_PA_UART(2) -#define S5P_PA_UART3 S5P6450_PA_UART(3) -#define S5P_PA_UART4 S5P6450_PA_UART(4) -#define S5P_PA_UART5 S5P6450_PA_UART(5) +#define S5P64X0_PA_PDMA 0xE9000000 -#define S5P_SZ_UART SZ_256 +#define S5P64X0_PA_TIMER 0xEA000000 +#define S5P64X0_PA_RTC 0xEA100000 +#define S5P64X0_PA_WDT 0xEA200000 -#define S5P6440_PA_IIC0 (0xEC104000) -#define S5P6440_PA_IIC1 (0xEC20F000) -#define S5P6450_PA_IIC0 (0xEC100000) -#define S5P6450_PA_IIC1 (0xEC200000) +#define S5P6440_PA_IIC0 0xEC104000 +#define S5P6440_PA_IIC1 0xEC20F000 +#define S5P6450_PA_IIC0 0xEC100000 +#define S5P6450_PA_IIC1 0xEC200000 -#define S5P64X0_PA_SPI0 (0xEC400000) -#define S5P64X0_PA_SPI1 (0xEC500000) +#define S5P64X0_PA_SPI0 0xEC400000 +#define S5P64X0_PA_SPI1 0xEC500000 -#define S5P64X0_PA_HSOTG (0xED100000) +#define S5P64X0_PA_HSOTG 0xED100000 #define S5P64X0_PA_HSMMC(x) (0xED800000 + ((x) * 0x100000)) -#define S5P64X0_PA_I2S (0xF2000000) +#define S5P64X0_PA_I2S 0xF2000000 #define S5P6450_PA_I2S1 0xF2800000 #define S5P6450_PA_I2S2 0xF2900000 -#define S5P64X0_PA_PCM (0xF2100000) +#define S5P64X0_PA_PCM 0xF2100000 -#define S5P64X0_PA_ADC (0xF3000000) +#define S5P64X0_PA_ADC 0xF3000000 -/* compatibiltiy defines. */ +/* Compatibiltiy Defines */ #define S3C_PA_HSMMC0 S5P64X0_PA_HSMMC(0) #define S3C_PA_HSMMC1 S5P64X0_PA_HSMMC(1) @@ -83,6 +65,25 @@ #define S3C_PA_RTC S5P64X0_PA_RTC #define S3C_PA_WDT S5P64X0_PA_WDT +#define S5P_PA_CHIPID S5P64X0_PA_CHIPID +#define S5P_PA_SROMC S5P64X0_PA_SROMC +#define S5P_PA_SYSCON S5P64X0_PA_SYSCON +#define S5P_PA_TIMER S5P64X0_PA_TIMER + #define SAMSUNG_PA_ADC S5P64X0_PA_ADC +/* UART */ + +#define S5P6440_PA_UART(x) (0xEC000000 + ((x) * S3C_UART_OFFSET)) +#define S5P6450_PA_UART(x) ((x < 5) ? (0xEC800000 + ((x) * S3C_UART_OFFSET)) : (0xEC000000)) + +#define S5P_PA_UART0 S5P6450_PA_UART(0) +#define S5P_PA_UART1 S5P6450_PA_UART(1) +#define S5P_PA_UART2 S5P6450_PA_UART(2) +#define S5P_PA_UART3 S5P6450_PA_UART(3) +#define S5P_PA_UART4 S5P6450_PA_UART(4) +#define S5P_PA_UART5 S5P6450_PA_UART(5) + +#define S5P_SZ_UART SZ_256 + #endif /* __ASM_ARCH_MAP_H */ -- cgit v1.2.3-70-g09d2 From 6236b97b9fa032057a9908ad16ff02c95feb3ad8 Mon Sep 17 00:00:00 2001 From: Thomas Abraham Date: Tue, 15 Feb 2011 14:35:47 +0900 Subject: ARM: S5P: Fix end address in memory resource information for UART devices For S5P platforms, the end address in memory resource information for UART devices is one byte more than the intended value. Fix this by reducing the end address by one byte. Signed-off-by: Thomas Abraham Signed-off-by: Kukjin Kim --- arch/arm/plat-s5p/dev-uart.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) (limited to 'arch') diff --git a/arch/arm/plat-s5p/dev-uart.c b/arch/arm/plat-s5p/dev-uart.c index 6a734288617..afaf87fdb93 100644 --- a/arch/arm/plat-s5p/dev-uart.c +++ b/arch/arm/plat-s5p/dev-uart.c @@ -28,7 +28,7 @@ static struct resource s5p_uart0_resource[] = { [0] = { .start = S5P_PA_UART0, - .end = S5P_PA_UART0 + S5P_SZ_UART, + .end = S5P_PA_UART0 + S5P_SZ_UART - 1, .flags = IORESOURCE_MEM, }, [1] = { @@ -51,7 +51,7 @@ static struct resource s5p_uart0_resource[] = { static struct resource s5p_uart1_resource[] = { [0] = { .start = S5P_PA_UART1, - .end = S5P_PA_UART1 + S5P_SZ_UART, + .end = S5P_PA_UART1 + S5P_SZ_UART - 1, .flags = IORESOURCE_MEM, }, [1] = { @@ -74,7 +74,7 @@ static struct resource s5p_uart1_resource[] = { static struct resource s5p_uart2_resource[] = { [0] = { .start = S5P_PA_UART2, - .end = S5P_PA_UART2 + S5P_SZ_UART, + .end = S5P_PA_UART2 + S5P_SZ_UART - 1, .flags = IORESOURCE_MEM, }, [1] = { @@ -98,7 +98,7 @@ static struct resource s5p_uart3_resource[] = { #if CONFIG_SERIAL_SAMSUNG_UARTS > 3 [0] = { .start = S5P_PA_UART3, - .end = S5P_PA_UART3 + S5P_SZ_UART, + .end = S5P_PA_UART3 + S5P_SZ_UART - 1, .flags = IORESOURCE_MEM, }, [1] = { @@ -123,7 +123,7 @@ static struct resource s5p_uart4_resource[] = { #if CONFIG_SERIAL_SAMSUNG_UARTS > 4 [0] = { .start = S5P_PA_UART4, - .end = S5P_PA_UART4 + S5P_SZ_UART, + .end = S5P_PA_UART4 + S5P_SZ_UART - 1, .flags = IORESOURCE_MEM, }, [1] = { @@ -148,7 +148,7 @@ static struct resource s5p_uart5_resource[] = { #if CONFIG_SERIAL_SAMSUNG_UARTS > 5 [0] = { .start = S5P_PA_UART5, - .end = S5P_PA_UART5 + S5P_SZ_UART, + .end = S5P_PA_UART5 + S5P_SZ_UART - 1, .flags = IORESOURCE_MEM, }, [1] = { -- cgit v1.2.3-70-g09d2 From 03e3b5a0f18c53560de1984fbbfca146d31da2a5 Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Thu, 17 Feb 2011 13:13:56 +0100 Subject: [S390] atomic: use ACCESS_ONCE() for atomic_read() Let's make atomic_read() and atomic_set() behave like on all/most other architectures. Generated code is identical with gcc 4.5.2. Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky --- arch/s390/include/asm/atomic.h | 8 ++------ 1 file changed, 2 insertions(+), 6 deletions(-) (limited to 'arch') diff --git a/arch/s390/include/asm/atomic.h b/arch/s390/include/asm/atomic.h index 76daea11718..50cfb5ed601 100644 --- a/arch/s390/include/asm/atomic.h +++ b/arch/s390/include/asm/atomic.h @@ -36,14 +36,12 @@ static inline int atomic_read(const atomic_t *v) { - barrier(); - return v->counter; + return ACCESS_ONCE(v->counter); } static inline void atomic_set(atomic_t *v, int i) { v->counter = i; - barrier(); } static inline int atomic_add_return(int i, atomic_t *v) @@ -128,14 +126,12 @@ static inline int atomic_add_unless(atomic_t *v, int a, int u) static inline long long atomic64_read(const atomic64_t *v) { - barrier(); - return v->counter; + return ACCESS_ONCE(v->counter); } static inline void atomic64_set(atomic64_t *v, long long i) { v->counter = i; - barrier(); } static inline long long atomic64_add_return(long long i, atomic64_t *v) -- cgit v1.2.3-70-g09d2 From a8c8d7c683419d059e302373afc6998244f5f60f Mon Sep 17 00:00:00 2001 From: Martin Schwidefsky Date: Thu, 17 Feb 2011 13:13:57 +0100 Subject: [S390] correct ipl parameter block safe guard The 'output' variable is passed from decompress_kernel to check_ipl_parmblock before it is initialized. That disables the safe guard against the overwrite of the ipl parameter block. Fix this by passing the correct value to check_ipl_parmblock. Reported-by: David Binderman Signed-off-by: Martin Schwidefsky --- arch/s390/boot/compressed/misc.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/s390/boot/compressed/misc.c b/arch/s390/boot/compressed/misc.c index 0851eb1e919..2751b3a8a66 100644 --- a/arch/s390/boot/compressed/misc.c +++ b/arch/s390/boot/compressed/misc.c @@ -133,11 +133,12 @@ unsigned long decompress_kernel(void) unsigned long output_addr; unsigned char *output; - check_ipl_parmblock((void *) 0, (unsigned long) output + SZ__bss_start); + output_addr = ((unsigned long) &_end + HEAP_SIZE + 4095UL) & -4096UL; + check_ipl_parmblock((void *) 0, output_addr + SZ__bss_start); memset(&_bss, 0, &_ebss - &_bss); free_mem_ptr = (unsigned long)&_end; free_mem_end_ptr = free_mem_ptr + HEAP_SIZE; - output = (unsigned char *) ((free_mem_end_ptr + 4095UL) & -4096UL); + output = (unsigned char *) output_addr; #ifdef CONFIG_BLK_DEV_INITRD /* -- cgit v1.2.3-70-g09d2 From 7657e41a0bd16c9d8b3cefe8fd5d6ac3c25ae4bf Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Thu, 17 Feb 2011 13:13:58 +0100 Subject: [S390] atomic: use inline asm Use inline assemblies for atomic_read/set(). This way there shouldn't be any questions or subtle volatile semantics left. Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky --- arch/s390/include/asm/atomic.h | 22 ++++++++++++++++++---- 1 file changed, 18 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/s390/include/asm/atomic.h b/arch/s390/include/asm/atomic.h index 50cfb5ed601..5c5ba10384c 100644 --- a/arch/s390/include/asm/atomic.h +++ b/arch/s390/include/asm/atomic.h @@ -36,12 +36,19 @@ static inline int atomic_read(const atomic_t *v) { - return ACCESS_ONCE(v->counter); + int c; + + asm volatile( + " l %0,%1\n" + : "=d" (c) : "Q" (v->counter)); + return c; } static inline void atomic_set(atomic_t *v, int i) { - v->counter = i; + asm volatile( + " st %1,%0\n" + : "=Q" (v->counter) : "d" (i)); } static inline int atomic_add_return(int i, atomic_t *v) @@ -126,12 +133,19 @@ static inline int atomic_add_unless(atomic_t *v, int a, int u) static inline long long atomic64_read(const atomic64_t *v) { - return ACCESS_ONCE(v->counter); + long long c; + + asm volatile( + " lg %0,%1\n" + : "=d" (c) : "Q" (v->counter)); + return c; } static inline void atomic64_set(atomic64_t *v, long long i) { - v->counter = i; + asm volatile( + " stg %1,%0\n" + : "=Q" (v->counter) : "d" (i)); } static inline long long atomic64_add_return(long long i, atomic64_t *v) -- cgit v1.2.3-70-g09d2 From dd30ac327481f1663b6526fa9fa078569188b7cc Mon Sep 17 00:00:00 2001 From: Horst Hartmann Date: Thu, 17 Feb 2011 13:13:59 +0100 Subject: [S390] net: provide architecture specific NET_SKB_PAD NET_SKB_PAD has been increased from 32 to 64 and later to max(32, L1_CACHE_BYTES). This led to a 25% throughput decrease for streaming workloads accompanied by a 37% CPU cost increase on s390. Define a architecture specific NET_SKB_PAD with the old value of 32. Signed-off-by: Horst Hartmann Signed-off-by: Martin Schwidefsky --- arch/s390/include/asm/cache.h | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/s390/include/asm/cache.h b/arch/s390/include/asm/cache.h index 24aafa68b64..2a30d5ac066 100644 --- a/arch/s390/include/asm/cache.h +++ b/arch/s390/include/asm/cache.h @@ -13,6 +13,7 @@ #define L1_CACHE_BYTES 256 #define L1_CACHE_SHIFT 8 +#define NET_SKB_PAD 32 #define __read_mostly __attribute__((__section__(".data..read_mostly"))) -- cgit v1.2.3-70-g09d2 From 9613afc36a3114b776d7b09877060062cd3e4d89 Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Fri, 18 Feb 2011 17:36:06 +0900 Subject: ARM: SAMSUNG: Drop exporting s3c24xx_ts_set_platdata s3c24xx_ts_set_platdata is annotated __init and not used by any module, thus don't export it. This patch fixes below warning: WARNING: arch/arm/plat-samsung/built-in.o(__ksymtab+0x90): Section mismatch in reference from the variable __ksymtab_s3c24xx_ts_set_platdata to the function .init.text:s3c24xx_ts_set_platdata() The symbol s3c24xx_ts_set_platdata is exported and annotated __init Fix this by removing the __init annotation of s3c24xx_ts_set_platdata or drop the export. Signed-off-by: Axel Lin Signed-off-by: Kukjin Kim --- arch/arm/plat-samsung/dev-ts.c | 1 - 1 file changed, 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/plat-samsung/dev-ts.c b/arch/arm/plat-samsung/dev-ts.c index 236ef8427d7..3e4bd8147bf 100644 --- a/arch/arm/plat-samsung/dev-ts.c +++ b/arch/arm/plat-samsung/dev-ts.c @@ -58,4 +58,3 @@ void __init s3c24xx_ts_set_platdata(struct s3c2410_ts_mach_info *pd) s3c_device_ts.dev.platform_data = npd; } -EXPORT_SYMBOL(s3c24xx_ts_set_platdata); -- cgit v1.2.3-70-g09d2 From 979f395d2b5be82246e35c9f7fc2b977a2f2a45b Mon Sep 17 00:00:00 2001 From: Marek Szyprowski Date: Fri, 18 Feb 2011 17:47:34 +0900 Subject: ARM: S5PV210: Update max8998_platform_data Max8998 PMIC driver's platform data has been changed once again in commit 735a3d9efdc. This patch fixes build break caused by that commit. Signed-off-by: Marek Szyprowski Signed-off-by: Kyungmin Park Signed-off-by: Kukjin Kim --- arch/arm/mach-s5pv210/mach-aquila.c | 9 ++++++--- arch/arm/mach-s5pv210/mach-goni.c | 9 ++++++--- 2 files changed, 12 insertions(+), 6 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-s5pv210/mach-aquila.c b/arch/arm/mach-s5pv210/mach-aquila.c index 461aa035afc..1236e19a7a4 100644 --- a/arch/arm/mach-s5pv210/mach-aquila.c +++ b/arch/arm/mach-s5pv210/mach-aquila.c @@ -381,9 +381,12 @@ static struct max8998_platform_data aquila_max8998_pdata = { .buck1_set1 = S5PV210_GPH0(3), .buck1_set2 = S5PV210_GPH0(4), .buck2_set3 = S5PV210_GPH0(5), - .buck1_max_voltage1 = 1200000, - .buck1_max_voltage2 = 1200000, - .buck2_max_voltage = 1200000, + .buck1_voltage1 = 1200000, + .buck1_voltage2 = 1200000, + .buck1_voltage3 = 1200000, + .buck1_voltage4 = 1200000, + .buck2_voltage1 = 1200000, + .buck2_voltage2 = 1200000, }; #endif diff --git a/arch/arm/mach-s5pv210/mach-goni.c b/arch/arm/mach-s5pv210/mach-goni.c index e22d5112fd4..2beeb667216 100644 --- a/arch/arm/mach-s5pv210/mach-goni.c +++ b/arch/arm/mach-s5pv210/mach-goni.c @@ -521,9 +521,12 @@ static struct max8998_platform_data goni_max8998_pdata = { .buck1_set1 = S5PV210_GPH0(3), .buck1_set2 = S5PV210_GPH0(4), .buck2_set3 = S5PV210_GPH0(5), - .buck1_max_voltage1 = 1200000, - .buck1_max_voltage2 = 1200000, - .buck2_max_voltage = 1200000, + .buck1_voltage1 = 1200000, + .buck1_voltage2 = 1200000, + .buck1_voltage3 = 1200000, + .buck1_voltage4 = 1200000, + .buck2_voltage1 = 1200000, + .buck2_voltage2 = 1200000, }; #endif -- cgit v1.2.3-70-g09d2 From d1061331b72e2e1420187e4684740b4a481c73a4 Mon Sep 17 00:00:00 2001 From: Marek Szyprowski Date: Fri, 18 Feb 2011 17:51:43 +0900 Subject: ARM: S5PV210: Fix regulator names Since commit 1130e5b3ff4 regulators are exported to debugfs. The names of the regulators that contains slash ('/') causes an ops during kernel boot. This patch fixes this issue. Signed-off-by: Marek Szyprowski Signed-off-by: Kyungmin Park Signed-off-by: Kukjin Kim --- arch/arm/mach-s5pv210/mach-aquila.c | 6 +++--- arch/arm/mach-s5pv210/mach-goni.c | 6 +++--- 2 files changed, 6 insertions(+), 6 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-s5pv210/mach-aquila.c b/arch/arm/mach-s5pv210/mach-aquila.c index 1236e19a7a4..557add4fc56 100644 --- a/arch/arm/mach-s5pv210/mach-aquila.c +++ b/arch/arm/mach-s5pv210/mach-aquila.c @@ -149,7 +149,7 @@ static struct regulator_init_data aquila_ldo2_data = { static struct regulator_init_data aquila_ldo3_data = { .constraints = { - .name = "VUSB/MIPI_1.1V", + .name = "VUSB+MIPI_1.1V", .min_uV = 1100000, .max_uV = 1100000, .apply_uV = 1, @@ -197,7 +197,7 @@ static struct regulator_init_data aquila_ldo7_data = { static struct regulator_init_data aquila_ldo8_data = { .constraints = { - .name = "VUSB/VADC_3.3V", + .name = "VUSB+VADC_3.3V", .min_uV = 3300000, .max_uV = 3300000, .apply_uV = 1, @@ -207,7 +207,7 @@ static struct regulator_init_data aquila_ldo8_data = { static struct regulator_init_data aquila_ldo9_data = { .constraints = { - .name = "VCC/VCAM_2.8V", + .name = "VCC+VCAM_2.8V", .min_uV = 2800000, .max_uV = 2800000, .apply_uV = 1, diff --git a/arch/arm/mach-s5pv210/mach-goni.c b/arch/arm/mach-s5pv210/mach-goni.c index 2beeb667216..056f5c769b0 100644 --- a/arch/arm/mach-s5pv210/mach-goni.c +++ b/arch/arm/mach-s5pv210/mach-goni.c @@ -288,7 +288,7 @@ static struct regulator_init_data goni_ldo2_data = { static struct regulator_init_data goni_ldo3_data = { .constraints = { - .name = "VUSB/MIPI_1.1V", + .name = "VUSB+MIPI_1.1V", .min_uV = 1100000, .max_uV = 1100000, .apply_uV = 1, @@ -337,7 +337,7 @@ static struct regulator_init_data goni_ldo7_data = { static struct regulator_init_data goni_ldo8_data = { .constraints = { - .name = "VUSB/VADC_3.3V", + .name = "VUSB+VADC_3.3V", .min_uV = 3300000, .max_uV = 3300000, .apply_uV = 1, @@ -347,7 +347,7 @@ static struct regulator_init_data goni_ldo8_data = { static struct regulator_init_data goni_ldo9_data = { .constraints = { - .name = "VCC/VCAM_2.8V", + .name = "VCC+VCAM_2.8V", .min_uV = 2800000, .max_uV = 2800000, .apply_uV = 1, -- cgit v1.2.3-70-g09d2 From 885028e4ba4caf49d565c96481e1a05220ecb517 Mon Sep 17 00:00:00 2001 From: Srinidhi Kasagar Date: Thu, 17 Feb 2011 07:03:51 +0100 Subject: ARM: 6741/1: errata: pl310 cache sync operation may be faulty The effect of cache sync operation is to drain the store buffer and wait for all internal buffers to be empty. In normal conditions, store buffer is able to merge the normal memory writes within its 32-byte data buffers. Due to this erratum present in r3p0, the effect of cache sync operation on the store buffer still remains when the operation completes. This means that the store buffer is always asked to drain and this prevents it from merging any further writes. This can severely affect performance on the write traffic esp. on Normal memory NC one. The proposed workaround is to replace the normal offset of cache sync operation(0x730) by another offset targeting an unmapped PL310 register 0x740. Signed-off-by: srinidhi kasagar Acked-by: Linus Walleij Acked-by: Catalin Marinas Signed-off-by: Russell King --- arch/arm/Kconfig | 15 +++++++++++++++ arch/arm/include/asm/hardware/cache-l2x0.h | 1 + arch/arm/mm/cache-l2x0.c | 6 ++++++ 3 files changed, 22 insertions(+) (limited to 'arch') diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 26d45e5b636..ba9fc213f34 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -1177,6 +1177,21 @@ config ARM_ERRATA_743622 visible impact on the overall performance or power consumption of the processor. +config ARM_ERRATA_753970 + bool "ARM errata: cache sync operation may be faulty" + depends on CACHE_PL310 + help + This option enables the workaround for the 753970 PL310 (r3p0) erratum. + + Under some condition the effect of cache sync operation on + the store buffer still remains when the operation completes. + This means that the store buffer is always asked to drain and + this prevents it from merging any further writes. The workaround + is to replace the normal offset of cache sync operation (0x730) + by another offset targeting an unmapped PL310 register 0x740. + This has the same effect as the cache sync operation: store buffer + drain and waiting for all buffers empty. + endmenu source "arch/arm/common/Kconfig" diff --git a/arch/arm/include/asm/hardware/cache-l2x0.h b/arch/arm/include/asm/hardware/cache-l2x0.h index 5aeec1e1735..16bd4803158 100644 --- a/arch/arm/include/asm/hardware/cache-l2x0.h +++ b/arch/arm/include/asm/hardware/cache-l2x0.h @@ -36,6 +36,7 @@ #define L2X0_RAW_INTR_STAT 0x21C #define L2X0_INTR_CLEAR 0x220 #define L2X0_CACHE_SYNC 0x730 +#define L2X0_DUMMY_REG 0x740 #define L2X0_INV_LINE_PA 0x770 #define L2X0_INV_WAY 0x77C #define L2X0_CLEAN_LINE_PA 0x7B0 diff --git a/arch/arm/mm/cache-l2x0.c b/arch/arm/mm/cache-l2x0.c index 170c9bb9586..f2ce38e085d 100644 --- a/arch/arm/mm/cache-l2x0.c +++ b/arch/arm/mm/cache-l2x0.c @@ -49,7 +49,13 @@ static inline void cache_wait(void __iomem *reg, unsigned long mask) static inline void cache_sync(void) { void __iomem *base = l2x0_base; + +#ifdef CONFIG_ARM_ERRATA_753970 + /* write to an unmmapped register */ + writel_relaxed(0, base + L2X0_DUMMY_REG); +#else writel_relaxed(0, base + L2X0_CACHE_SYNC); +#endif cache_wait(base + L2X0_CACHE_SYNC, 1); } -- cgit v1.2.3-70-g09d2 From 71efb063f4a145ae420be054f5a91dcf7c19b375 Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Fri, 18 Feb 2011 16:21:06 +0100 Subject: ARM: 6742/1: pmu: avoid setting IRQ affinity on UP systems Now that we can execute a CONFIG_SMP kernel on a uniprocessor system, extra care has to be taken in the PMU IRQ affinity setting code to ensure that we don't always fail to initialise. This patch changes the CPU PMU initialisation code so that when we only have a single IRQ, whose affinity can not be changed at the controller, we report success (0) rather than -EINVAL. Reported-by: Avik Sil Acked-by: Jamie Iles Signed-off-by: Will Deacon Signed-off-by: Russell King --- arch/arm/kernel/pmu.c | 22 ++++++++++++++-------- 1 file changed, 14 insertions(+), 8 deletions(-) (limited to 'arch') diff --git a/arch/arm/kernel/pmu.c b/arch/arm/kernel/pmu.c index b8af96ea62e..2c79eec1926 100644 --- a/arch/arm/kernel/pmu.c +++ b/arch/arm/kernel/pmu.c @@ -97,28 +97,34 @@ set_irq_affinity(int irq, irq, cpu); return err; #else - return 0; + return -EINVAL; #endif } static int init_cpu_pmu(void) { - int i, err = 0; + int i, irqs, err = 0; struct platform_device *pdev = pmu_devices[ARM_PMU_DEVICE_CPU]; - if (!pdev) { - err = -ENODEV; - goto out; - } + if (!pdev) + return -ENODEV; + + irqs = pdev->num_resources; + + /* + * If we have a single PMU interrupt that we can't shift, assume that + * we're running on a uniprocessor machine and continue. + */ + if (irqs == 1 && !irq_can_set_affinity(platform_get_irq(pdev, 0))) + return 0; - for (i = 0; i < pdev->num_resources; ++i) { + for (i = 0; i < irqs; ++i) { err = set_irq_affinity(platform_get_irq(pdev, i), i); if (err) break; } -out: return err; } -- cgit v1.2.3-70-g09d2 From 9a27c27ce49df72b1b0062e2ad192a804e1b069b Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Fri, 18 Feb 2011 16:36:35 +0100 Subject: ARM: 6743/1: errata: interrupted ICALLUIS may prevent completion of broadcasted operation On versions of the Cortex-A9 prior to r3p0, an interrupted ICIALLUIS operation may prevent the completion of a following broadcasted operation if the second operation is received by a CPU before the ICIALLUIS has completed, potentially leading to corrupted entries in the cache or TLB. This workaround sets a bit in the diagnostic register of the Cortex-A9, causing CP15 maintenance operations to be uninterruptible. Acked-by: Catalin Marinas Signed-off-by: Will Deacon Signed-off-by: Russell King --- arch/arm/Kconfig | 10 ++++++++++ arch/arm/mm/proc-v7.S | 6 ++++++ 2 files changed, 16 insertions(+) (limited to 'arch') diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index ba9fc213f34..166efa2a19c 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -1177,6 +1177,16 @@ config ARM_ERRATA_743622 visible impact on the overall performance or power consumption of the processor. +config ARM_ERRATA_751472 + bool "ARM errata: Interrupted ICIALLUIS may prevent completion of broadcasted operation" + depends on CPU_V7 && SMP + help + This option enables the workaround for the 751472 Cortex-A9 (prior + to r3p0) erratum. An interrupted ICIALLUIS operation may prevent the + completion of a following broadcasted operation if the second + operation is received by a CPU before the ICIALLUIS has completed, + potentially leading to corrupted entries in the cache or TLB. + config ARM_ERRATA_753970 bool "ARM errata: cache sync operation may be faulty" depends on CACHE_PL310 diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S index 0c1172b56b4..8e335623913 100644 --- a/arch/arm/mm/proc-v7.S +++ b/arch/arm/mm/proc-v7.S @@ -264,6 +264,12 @@ __v7_setup: orreq r10, r10, #1 << 6 @ set bit #6 mcreq p15, 0, r10, c15, c0, 1 @ write diagnostic register #endif +#ifdef CONFIG_ARM_ERRATA_751472 + cmp r6, #0x30 @ present prior to r3p0 + mrclt p15, 0, r10, c15, c0, 1 @ read diagnostic register + orrlt r10, r10, #1 << 11 @ set bit #11 + mcrlt p15, 0, r10, c15, c0, 1 @ write diagnostic register +#endif 3: mov r10, #0 #ifdef HARVARD_CACHE -- cgit v1.2.3-70-g09d2 From 32c3fcb08178f6ca14191b22d72760984cfb75cb Mon Sep 17 00:00:00 2001 From: Nicolas Pitre Date: Wed, 16 Feb 2011 17:55:38 +0100 Subject: ARM: 6739/1: update .gitignore for boot/compressed Signed-off-by: Nicolas Pitre Signed-off-by: Russell King --- arch/arm/boot/compressed/.gitignore | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/boot/compressed/.gitignore b/arch/arm/boot/compressed/.gitignore index ab204db594d..c6028967d33 100644 --- a/arch/arm/boot/compressed/.gitignore +++ b/arch/arm/boot/compressed/.gitignore @@ -1,3 +1,7 @@ font.c -piggy.gz +lib1funcs.S +piggy.gzip +piggy.lzo +piggy.lzma +vmlinux vmlinux.lds -- cgit v1.2.3-70-g09d2 From 315cfe7835c9a3fe27f15519bdeee8bf0a293e33 Mon Sep 17 00:00:00 2001 From: Catalin Marinas Date: Tue, 15 Feb 2011 18:06:57 +0100 Subject: ARM: 6676/1: Correct the cpu_architecture() function for ARMv7 If ID_MMFR0[3:0] >= 3, the architecture version is ARMv7. The code was currently only testing for ID_MMFR0[3:0] == 3. Signed-off-by: Catalin Marinas Signed-off-by: Russell King --- arch/arm/kernel/setup.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c index 420b8d6485d..5ea4fb718b9 100644 --- a/arch/arm/kernel/setup.c +++ b/arch/arm/kernel/setup.c @@ -226,8 +226,8 @@ int cpu_architecture(void) * Register 0 and check for VMSAv7 or PMSAv7 */ asm("mrc p15, 0, %0, c0, c1, 4" : "=r" (mmfr0)); - if ((mmfr0 & 0x0000000f) == 0x00000003 || - (mmfr0 & 0x000000f0) == 0x00000030) + if ((mmfr0 & 0x0000000f) >= 0x00000003 || + (mmfr0 & 0x000000f0) >= 0x00000030) cpu_arch = CPU_ARCH_ARMv7; else if ((mmfr0 & 0x0000000f) == 0x00000002 || (mmfr0 & 0x000000f0) == 0x00000020) -- cgit v1.2.3-70-g09d2 From d16613586aa064d87ef05e3b929e3b4fdc714cc4 Mon Sep 17 00:00:00 2001 From: viresh kumar Date: Wed, 16 Feb 2011 07:40:27 +0100 Subject: ARM: 6720/1: SPEAr: Append UL to VMALLOC_END This patch fixes following warning: arch/arm/mm/init.c:606: warning: format '%08lx' expects type 'long unsigned int', but argument 12 has type 'unsigned int' by appending UL to VMALLOC_END's Number. Reviewed-by: Stanley Miao Signed-off-by: Viresh Kumar Signed-off-by: Russell King --- arch/arm/plat-spear/include/plat/vmalloc.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/plat-spear/include/plat/vmalloc.h b/arch/arm/plat-spear/include/plat/vmalloc.h index 09e9372aea2..8c8b24d0704 100644 --- a/arch/arm/plat-spear/include/plat/vmalloc.h +++ b/arch/arm/plat-spear/include/plat/vmalloc.h @@ -14,6 +14,6 @@ #ifndef __PLAT_VMALLOC_H #define __PLAT_VMALLOC_H -#define VMALLOC_END 0xF0000000 +#define VMALLOC_END 0xF0000000UL #endif /* __PLAT_VMALLOC_H */ -- cgit v1.2.3-70-g09d2 From ac1556b37e9b06a41d7691dca0d50a28210488f9 Mon Sep 17 00:00:00 2001 From: viresh kumar Date: Wed, 16 Feb 2011 07:41:06 +0100 Subject: ARM: 6712/1: SPEAr: replace readl(), writel() with relaxed versions in uncompress.h readl() and writel() calls the outer cache maintainance operations which are not available during Linux uncompression. This patch replaces readl() and writel() with readl_relaxed() and writel_relaxed() to avoid the link time errors. Reviewed-by: Stanley Miao Signed-off-by: Viresh Kumar Signed-off-by: Russell King --- arch/arm/plat-spear/include/plat/uncompress.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/plat-spear/include/plat/uncompress.h b/arch/arm/plat-spear/include/plat/uncompress.h index 99ba6789cc9..6dd455bafdf 100644 --- a/arch/arm/plat-spear/include/plat/uncompress.h +++ b/arch/arm/plat-spear/include/plat/uncompress.h @@ -24,10 +24,10 @@ static inline void putc(int c) { void __iomem *base = (void __iomem *)SPEAR_DBG_UART_BASE; - while (readl(base + UART01x_FR) & UART01x_FR_TXFF) + while (readl_relaxed(base + UART01x_FR) & UART01x_FR_TXFF) barrier(); - writel(c, base + UART01x_DR); + writel_relaxed(c, base + UART01x_DR); } static inline void flush(void) -- cgit v1.2.3-70-g09d2 From b8272a61c16decd4c8627fc1181bdd174c922c3f Mon Sep 17 00:00:00 2001 From: Shiraz Hashim Date: Wed, 16 Feb 2011 07:40:29 +0100 Subject: ARM: 6722/1: SPEAr: sp810: switch to slow mode before reset In sysctl_soft_reset(), switch to slow mode before resetting the system via the system controller. This is required. Reviewed-by: Stanley Miao Signed-off-by: Shiraz Hashim Signed-off-by: Russell King --- arch/arm/include/asm/hardware/sp810.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'arch') diff --git a/arch/arm/include/asm/hardware/sp810.h b/arch/arm/include/asm/hardware/sp810.h index 721847dc68a..e0d1c0cfa54 100644 --- a/arch/arm/include/asm/hardware/sp810.h +++ b/arch/arm/include/asm/hardware/sp810.h @@ -58,6 +58,9 @@ static inline void sysctl_soft_reset(void __iomem *base) { + /* switch to slow mode */ + writel(0x2, base + SCCTRL); + /* writing any value to SCSYSSTAT reg will reset system */ writel(0, base + SCSYSSTAT); } -- cgit v1.2.3-70-g09d2 From 167879ae8924540660b187d759956f316dd6e8fe Mon Sep 17 00:00:00 2001 From: viresh kumar Date: Wed, 16 Feb 2011 07:40:41 +0100 Subject: ARM: 6700/1: SPEAr: Correct SOC config base address for spear320 SPEAR320_SOC_CONFIG_BASE was wrong, causing the wrong registers to be accessed. Reviewed-by: Stanley Miao Signed-off-by: Viresh Kumar Signed-off-by: Russell King --- arch/arm/mach-spear3xx/include/mach/spear320.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-spear3xx/include/mach/spear320.h b/arch/arm/mach-spear3xx/include/mach/spear320.h index cacf17a958c..53677e464d4 100644 --- a/arch/arm/mach-spear3xx/include/mach/spear320.h +++ b/arch/arm/mach-spear3xx/include/mach/spear320.h @@ -62,7 +62,7 @@ #define SPEAR320_SMII1_BASE 0xAB000000 #define SPEAR320_SMII1_SIZE 0x01000000 -#define SPEAR320_SOC_CONFIG_BASE 0xB4000000 +#define SPEAR320_SOC_CONFIG_BASE 0xB3000000 #define SPEAR320_SOC_CONFIG_SIZE 0x00000070 /* Interrupt registers offsets and masks */ #define INT_STS_MASK_REG 0x04 -- cgit v1.2.3-70-g09d2 From dc810efb0ca5702c9d96782b99282d4b4383e877 Mon Sep 17 00:00:00 2001 From: Pawel Moll Date: Wed, 16 Feb 2011 18:54:01 +0100 Subject: ARM: 6740/1: Place correctly notes section in the linker script Commit 18991197b4b588255ccabf472ebc84db7b66a19c added --build-id linker option when toolchain supports it. ARM one does, but for some reason places the section at 0 when linker script doesn't mention it explicitly. The 1e621a8e3752367d4aae78a8ab00a18fb2793f34 worked around the problem removing this section from binary image with explicit objcopy options, but it still exists in vmlinux, confusing tools like debuggers and perf. This problem was discussed here: http://lists.infradead.org/pipermail/linux-arm-kernel/2010-May/015994.html http://lists.infradead.org/pipermail/linux-arm-kernel/2010-May/015994.html but the proposed changes to the linker script were substantial. This patch simply places NOTES (36 bytes long, at least when compiled with CodeSourcery toolchain) between data and bss, which seem to be the right place (and suggested by the sample linker script in include/asm-generic/vmlinux.lds.h). It is enough to place it correctly in vmlinux (so debuggers are happy): Section Headers: [11] .data PROGBITS c07ce000 7ce000 020fc0 00 WA 0 0 32 [12] .notes NOTE c07eefc0 7eefc0 000024 00 AX 0 0 4 [13] .bss NOBITS c07ef000 7eefe4 01e628 00 WA 0 0 32 Program Headers: LOAD 0x008000 0xc0008000 0xc0008000 0x7e6fe4 0x805628 RWE 0x8000 NOTE 0x7eefc0 0xc07eefc0 0xc07eefc0 0x00024 0x00024 R E 0x4 Section to Segment mapping: Segment Sections... 00 <...> .data .notes .bss 01 .notes and to get it exposed as /sys/kernel/notes used by perf tools. Signed-off-by: Pawel Moll Signed-off-by: Russell King --- arch/arm/Makefile | 2 +- arch/arm/kernel/vmlinux.lds.S | 2 ++ 2 files changed, 3 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/Makefile b/arch/arm/Makefile index c22c1adfedd..6f7b29294c8 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -15,7 +15,7 @@ ifeq ($(CONFIG_CPU_ENDIAN_BE8),y) LDFLAGS_vmlinux += --be8 endif -OBJCOPYFLAGS :=-O binary -R .note -R .note.gnu.build-id -R .comment -S +OBJCOPYFLAGS :=-O binary -R .comment -S GZFLAGS :=-9 #KBUILD_CFLAGS +=-pipe # Explicitly specifiy 32-bit ARM ISA since toolchain default can be -mthumb: diff --git a/arch/arm/kernel/vmlinux.lds.S b/arch/arm/kernel/vmlinux.lds.S index 86b66f3f203..558bd81a4fc 100644 --- a/arch/arm/kernel/vmlinux.lds.S +++ b/arch/arm/kernel/vmlinux.lds.S @@ -247,6 +247,8 @@ SECTIONS } #endif + NOTES + BSS_SECTION(0, 0, 0) _end = .; -- cgit v1.2.3-70-g09d2 From 53399053eb505cf541b2405bd9d9bca5ecfb96fb Mon Sep 17 00:00:00 2001 From: Russell King Date: Sun, 20 Feb 2011 12:22:52 +0000 Subject: ARM: Ensure predictable endian state on signal handler entry Ensure a predictable endian state when entering signal handlers. This avoids programs which use SETEND to momentarily switch their endian state from having their signal handlers entered with an unpredictable endian state. Cc: Acked-by: Dave Martin Signed-off-by: Russell King --- arch/arm/kernel/signal.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/kernel/signal.c b/arch/arm/kernel/signal.c index 907d5a620bc..abaf8445ce2 100644 --- a/arch/arm/kernel/signal.c +++ b/arch/arm/kernel/signal.c @@ -474,7 +474,9 @@ setup_return(struct pt_regs *regs, struct k_sigaction *ka, unsigned long handler = (unsigned long)ka->sa.sa_handler; unsigned long retcode; int thumb = 0; - unsigned long cpsr = regs->ARM_cpsr & ~PSR_f; + unsigned long cpsr = regs->ARM_cpsr & ~(PSR_f | PSR_E_BIT); + + cpsr |= PSR_ENDSTATE; /* * Maybe we need to deliver a 32-bit signal to a 26-bit task. -- cgit v1.2.3-70-g09d2 From a9ad21fed09cb95d34af9474be0831525b30c4c6 Mon Sep 17 00:00:00 2001 From: Russell King Date: Mon, 21 Feb 2011 10:13:36 +0000 Subject: ARM: Keep exit text/data around for SMP_ON_UP When SMP_ON_UP is used and the spinlocks are inlined, we end up with inline spinlocks in the exit code, with references from the SMP alternatives section to the exit sections. This causes link time errors. Avoid this by placing the exit sections in the init-discarded region. Cc: Tested-by: Dave Martin Signed-off-by: Russell King --- arch/arm/kernel/vmlinux.lds.S | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'arch') diff --git a/arch/arm/kernel/vmlinux.lds.S b/arch/arm/kernel/vmlinux.lds.S index 558bd81a4fc..61462790757 100644 --- a/arch/arm/kernel/vmlinux.lds.S +++ b/arch/arm/kernel/vmlinux.lds.S @@ -21,6 +21,12 @@ #define ARM_CPU_KEEP(x) #endif +#if defined(CONFIG_SMP_ON_UP) && !defined(CONFIG_DEBUG_SPINLOCK) +#define ARM_EXIT_KEEP(x) x +#else +#define ARM_EXIT_KEEP(x) +#endif + OUTPUT_ARCH(arm) ENTRY(stext) @@ -43,6 +49,7 @@ SECTIONS _sinittext = .; HEAD_TEXT INIT_TEXT + ARM_EXIT_KEEP(EXIT_TEXT) _einittext = .; ARM_CPU_DISCARD(PROC_INFO) __arch_info_begin = .; @@ -67,6 +74,7 @@ SECTIONS #ifndef CONFIG_XIP_KERNEL __init_begin = _stext; INIT_DATA + ARM_EXIT_KEEP(EXIT_DATA) #endif } @@ -162,6 +170,7 @@ SECTIONS . = ALIGN(PAGE_SIZE); __init_begin = .; INIT_DATA + ARM_EXIT_KEEP(EXIT_DATA) . = ALIGN(PAGE_SIZE); __init_end = .; #endif -- cgit v1.2.3-70-g09d2 From 06824ba824b3e9f2fedb38bee79af0643198ed7f Mon Sep 17 00:00:00 2001 From: Russell King Date: Sun, 20 Feb 2011 12:16:45 +0000 Subject: ARM: tlb: delay page freeing for SMP and ARMv7 CPUs We need to delay freeing any mapped page on SMP and ARMv7 systems to ensure that the data is not accessed by other CPUs, or is used for speculative prefetch with ARMv7. This includes not only mapped pages but also pages used for the page tables themselves. This avoids races with the MMU/other CPUs accessing pages after they've been freed but before we've invalidated the TLB. Signed-off-by: Russell King --- arch/arm/include/asm/tlb.h | 102 +++++++++++++++++++++++++++++++++++++++------ 1 file changed, 89 insertions(+), 13 deletions(-) (limited to 'arch') diff --git a/arch/arm/include/asm/tlb.h b/arch/arm/include/asm/tlb.h index f41a6f57cd1..e7690887b95 100644 --- a/arch/arm/include/asm/tlb.h +++ b/arch/arm/include/asm/tlb.h @@ -18,7 +18,6 @@ #define __ASMARM_TLB_H #include -#include #ifndef CONFIG_MMU @@ -27,7 +26,23 @@ #else /* !CONFIG_MMU */ +#include #include +#include + +/* + * We need to delay page freeing for SMP as other CPUs can access pages + * which have been removed but not yet had their TLB entries invalidated. + * Also, as ARMv7 speculative prefetch can drag new entries into the TLB, + * we need to apply this same delaying tactic to ensure correct operation. + */ +#if defined(CONFIG_SMP) || defined(CONFIG_CPU_32v7) +#define tlb_fast_mode(tlb) 0 +#define FREE_PTE_NR 500 +#else +#define tlb_fast_mode(tlb) 1 +#define FREE_PTE_NR 0 +#endif /* * TLB handling. This allows us to remove pages from the page @@ -36,12 +51,58 @@ struct mmu_gather { struct mm_struct *mm; unsigned int fullmm; + struct vm_area_struct *vma; unsigned long range_start; unsigned long range_end; + unsigned int nr; + struct page *pages[FREE_PTE_NR]; }; DECLARE_PER_CPU(struct mmu_gather, mmu_gathers); +/* + * This is unnecessarily complex. There's three ways the TLB shootdown + * code is used: + * 1. Unmapping a range of vmas. See zap_page_range(), unmap_region(). + * tlb->fullmm = 0, and tlb_start_vma/tlb_end_vma will be called. + * tlb->vma will be non-NULL. + * 2. Unmapping all vmas. See exit_mmap(). + * tlb->fullmm = 1, and tlb_start_vma/tlb_end_vma will be called. + * tlb->vma will be non-NULL. Additionally, page tables will be freed. + * 3. Unmapping argument pages. See shift_arg_pages(). + * tlb->fullmm = 0, but tlb_start_vma/tlb_end_vma will not be called. + * tlb->vma will be NULL. + */ +static inline void tlb_flush(struct mmu_gather *tlb) +{ + if (tlb->fullmm || !tlb->vma) + flush_tlb_mm(tlb->mm); + else if (tlb->range_end > 0) { + flush_tlb_range(tlb->vma, tlb->range_start, tlb->range_end); + tlb->range_start = TASK_SIZE; + tlb->range_end = 0; + } +} + +static inline void tlb_add_flush(struct mmu_gather *tlb, unsigned long addr) +{ + if (!tlb->fullmm) { + if (addr < tlb->range_start) + tlb->range_start = addr; + if (addr + PAGE_SIZE > tlb->range_end) + tlb->range_end = addr + PAGE_SIZE; + } +} + +static inline void tlb_flush_mmu(struct mmu_gather *tlb) +{ + tlb_flush(tlb); + if (!tlb_fast_mode(tlb)) { + free_pages_and_swap_cache(tlb->pages, tlb->nr); + tlb->nr = 0; + } +} + static inline struct mmu_gather * tlb_gather_mmu(struct mm_struct *mm, unsigned int full_mm_flush) { @@ -49,6 +110,8 @@ tlb_gather_mmu(struct mm_struct *mm, unsigned int full_mm_flush) tlb->mm = mm; tlb->fullmm = full_mm_flush; + tlb->vma = NULL; + tlb->nr = 0; return tlb; } @@ -56,8 +119,7 @@ tlb_gather_mmu(struct mm_struct *mm, unsigned int full_mm_flush) static inline void tlb_finish_mmu(struct mmu_gather *tlb, unsigned long start, unsigned long end) { - if (tlb->fullmm) - flush_tlb_mm(tlb->mm); + tlb_flush_mmu(tlb); /* keep the page table cache within bounds */ check_pgt_cache(); @@ -71,12 +133,7 @@ tlb_finish_mmu(struct mmu_gather *tlb, unsigned long start, unsigned long end) static inline void tlb_remove_tlb_entry(struct mmu_gather *tlb, pte_t *ptep, unsigned long addr) { - if (!tlb->fullmm) { - if (addr < tlb->range_start) - tlb->range_start = addr; - if (addr + PAGE_SIZE > tlb->range_end) - tlb->range_end = addr + PAGE_SIZE; - } + tlb_add_flush(tlb, addr); } /* @@ -89,6 +146,7 @@ tlb_start_vma(struct mmu_gather *tlb, struct vm_area_struct *vma) { if (!tlb->fullmm) { flush_cache_range(vma, vma->vm_start, vma->vm_end); + tlb->vma = vma; tlb->range_start = TASK_SIZE; tlb->range_end = 0; } @@ -97,12 +155,30 @@ tlb_start_vma(struct mmu_gather *tlb, struct vm_area_struct *vma) static inline void tlb_end_vma(struct mmu_gather *tlb, struct vm_area_struct *vma) { - if (!tlb->fullmm && tlb->range_end > 0) - flush_tlb_range(vma, tlb->range_start, tlb->range_end); + if (!tlb->fullmm) + tlb_flush(tlb); +} + +static inline void tlb_remove_page(struct mmu_gather *tlb, struct page *page) +{ + if (tlb_fast_mode(tlb)) { + free_page_and_swap_cache(page); + } else { + tlb->pages[tlb->nr++] = page; + if (tlb->nr >= FREE_PTE_NR) + tlb_flush_mmu(tlb); + } +} + +static inline void __pte_free_tlb(struct mmu_gather *tlb, pgtable_t pte, + unsigned long addr) +{ + pgtable_page_dtor(pte); + tlb_add_flush(tlb, addr); + tlb_remove_page(tlb, pte); } -#define tlb_remove_page(tlb,page) free_page_and_swap_cache(page) -#define pte_free_tlb(tlb, ptep, addr) pte_free((tlb)->mm, ptep) +#define pte_free_tlb(tlb, ptep, addr) __pte_free_tlb(tlb, ptep, addr) #define pmd_free_tlb(tlb, pmdp, addr) pmd_free((tlb)->mm, pmdp) #define tlb_migrate_finish(mm) do { } while (0) -- cgit v1.2.3-70-g09d2 From 58e9c47fa0dd76693b2c85c010c7430a4de77c6d Mon Sep 17 00:00:00 2001 From: Russell King Date: Sun, 20 Feb 2011 12:27:49 +0000 Subject: ARM: tlb: move noMMU tlb_flush() to asm/tlb.h There's no need to noMMU to put tlb_flush() in asm/tlbflush.h - it's part of the tlb shootdown interface. Move it to asm/tlb.h instead, as per x86. Signed-off-by: Russell King --- arch/arm/include/asm/tlb.h | 3 +++ arch/arm/include/asm/tlbflush.h | 7 +------ 2 files changed, 4 insertions(+), 6 deletions(-) (limited to 'arch') diff --git a/arch/arm/include/asm/tlb.h b/arch/arm/include/asm/tlb.h index e7690887b95..82dfe5d0c41 100644 --- a/arch/arm/include/asm/tlb.h +++ b/arch/arm/include/asm/tlb.h @@ -22,6 +22,9 @@ #ifndef CONFIG_MMU #include + +#define tlb_flush(tlb) ((void) tlb) + #include #else /* !CONFIG_MMU */ diff --git a/arch/arm/include/asm/tlbflush.h b/arch/arm/include/asm/tlbflush.h index ce7378ea15a..d2005de383b 100644 --- a/arch/arm/include/asm/tlbflush.h +++ b/arch/arm/include/asm/tlbflush.h @@ -10,12 +10,7 @@ #ifndef _ASMARM_TLBFLUSH_H #define _ASMARM_TLBFLUSH_H - -#ifndef CONFIG_MMU - -#define tlb_flush(tlb) ((void) tlb) - -#else /* CONFIG_MMU */ +#ifdef CONFIG_MMU #include -- cgit v1.2.3-70-g09d2 From 5a5af730536fbf15fc354980cba2a0400afa6b76 Mon Sep 17 00:00:00 2001 From: Nicolas Pitre Date: Mon, 21 Feb 2011 04:37:20 +0100 Subject: ARM: 6745/1: kprobes insn decoding fix Marcin Slusarz says: > In arch/arm/kernel/kprobes-decode.c there's a function > arm_kprobe_decode_insn which does: > > } else if ((insn & 0x0e000000) == 0x0c400000) { > ... > > This is always false, so code below is dead. > I found this bug by coccinelle (http://coccinelle.lip6.fr/). Reported-by: Marcin Slusarz Signed-off-by: Nicolas Pitre Signed-off-by: Russell King --- arch/arm/kernel/kprobes-decode.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/kernel/kprobes-decode.c b/arch/arm/kernel/kprobes-decode.c index 2c1f0050c9c..8f6ed43861f 100644 --- a/arch/arm/kernel/kprobes-decode.c +++ b/arch/arm/kernel/kprobes-decode.c @@ -1437,7 +1437,7 @@ arm_kprobe_decode_insn(kprobe_opcode_t insn, struct arch_specific_insn *asi) return space_cccc_1100_010x(insn, asi); - } else if ((insn & 0x0e000000) == 0x0c400000) { + } else if ((insn & 0x0e000000) == 0x0c000000) { return space_cccc_110x(insn, asi); -- cgit v1.2.3-70-g09d2