From 8ed9059533eb89b4372d7fc31b6565c053e5253b Mon Sep 17 00:00:00 2001 From: Maxim Osipov Date: Wed, 15 Sep 2010 11:54:49 +0100 Subject: ARM: 6393/1: AT91: Add flexibity board support This patch adds support for Flexibity Connect platform from http://www.flexibity.com/ (AT91SAM9260 based). Signed-off-by: Maxim Osipov Acked-by: Jean-Christophe PLAGNIOL-VILLARD Acked-by: Andrew Victor Signed-off-by: Russell King --- arch/arm/mach-at91/Kconfig | 6 ++ arch/arm/mach-at91/Makefile | 1 + arch/arm/mach-at91/board-flexibity.c | 164 +++++++++++++++++++++++++++++++++++ 3 files changed, 171 insertions(+) create mode 100644 arch/arm/mach-at91/board-flexibity.c (limited to 'arch') diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig index 939bccd7056..ca33862b4bf 100644 --- a/arch/arm/mach-at91/Kconfig +++ b/arch/arm/mach-at91/Kconfig @@ -248,6 +248,12 @@ config MACH_CPU9260 Select this if you are using a Eukrea Electromatique's CPU9260 Board +config MACH_FLEXIBITY + bool "Flexibity Connect board" + help + Select this if you are using Flexibity Connect board + + endif # ---------------------------------------------------------- diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile index ca2ac003f41..7cbe06d7cee 100644 --- a/arch/arm/mach-at91/Makefile +++ b/arch/arm/mach-at91/Makefile @@ -46,6 +46,7 @@ obj-$(CONFIG_MACH_USB_A9260) += board-usb-a9260.o obj-$(CONFIG_MACH_QIL_A9260) += board-qil-a9260.o obj-$(CONFIG_MACH_AFEB9260) += board-afeb-9260v1.o obj-$(CONFIG_MACH_CPU9260) += board-cpu9krea.o +obj-$(CONFIG_MACH_FLEXIBITY) += board-flexibity.o # AT91SAM9261 board-specific support obj-$(CONFIG_MACH_AT91SAM9261EK) += board-sam9261ek.o diff --git a/arch/arm/mach-at91/board-flexibity.c b/arch/arm/mach-at91/board-flexibity.c new file mode 100644 index 00000000000..216c8ca985f --- /dev/null +++ b/arch/arm/mach-at91/board-flexibity.c @@ -0,0 +1,164 @@ +/* + * linux/arch/arm/mach-at91/board-flexibity.c + * + * Copyright (C) 2010 Flexibity + * Copyright (C) 2005 SAN People + * Copyright (C) 2006 Atmel + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include + +#include + +#include +#include +#include + +#include +#include + +#include "generic.h" + +static void __init flexibity_map_io(void) +{ + /* Initialize processor: 18.432 MHz crystal */ + at91sam9260_initialize(18432000); + + /* DBGU on ttyS0. (Rx & Tx only) */ + at91_register_uart(0, 0, 0); + + /* set serial console to ttyS0 (ie, DBGU) */ + at91_set_serial_console(0); +} + +static void __init flexibity_init_irq(void) +{ + at91sam9260_init_interrupts(NULL); +} + +/* USB Host port */ +static struct at91_usbh_data __initdata flexibity_usbh_data = { + .ports = 2, +}; + +/* USB Device port */ +static struct at91_udc_data __initdata flexibity_udc_data = { + .vbus_pin = AT91_PIN_PC5, + .pullup_pin = 0, /* pull-up driven by UDC */ +}; + +/* SPI devices */ +static struct spi_board_info flexibity_spi_devices[] = { + { /* DataFlash chip */ + .modalias = "mtd_dataflash", + .chip_select = 1, + .max_speed_hz = 15 * 1000 * 1000, + .bus_num = 0, + }, +}; + +/* MCI (SD/MMC) */ +static struct at91_mmc_data __initdata flexibity_mmc_data = { + .slot_b = 0, + .wire4 = 1, + .det_pin = AT91_PIN_PC9, + .wp_pin = AT91_PIN_PC4, +}; + +/* LEDs */ +static struct gpio_led flexibity_leds[] = { + { + .name = "usb1:green", + .gpio = AT91_PIN_PA12, + .active_low = 1, + .default_trigger = "default-on", + }, + { + .name = "usb1:red", + .gpio = AT91_PIN_PA13, + .active_low = 1, + .default_trigger = "default-on", + }, + { + .name = "usb2:green", + .gpio = AT91_PIN_PB26, + .active_low = 1, + .default_trigger = "default-on", + }, + { + .name = "usb2:red", + .gpio = AT91_PIN_PB27, + .active_low = 1, + .default_trigger = "default-on", + }, + { + .name = "usb3:green", + .gpio = AT91_PIN_PC8, + .active_low = 1, + .default_trigger = "default-on", + }, + { + .name = "usb3:red", + .gpio = AT91_PIN_PC6, + .active_low = 1, + .default_trigger = "default-on", + }, + { + .name = "usb4:green", + .gpio = AT91_PIN_PB4, + .active_low = 1, + .default_trigger = "default-on", + }, + { + .name = "usb4:red", + .gpio = AT91_PIN_PB5, + .active_low = 1, + .default_trigger = "default-on", + } +}; + +static void __init flexibity_board_init(void) +{ + /* Serial */ + at91_add_device_serial(); + /* USB Host */ + at91_add_device_usbh(&flexibity_usbh_data); + /* USB Device */ + at91_add_device_udc(&flexibity_udc_data); + /* SPI */ + at91_add_device_spi(flexibity_spi_devices, + ARRAY_SIZE(flexibity_spi_devices)); + /* MMC */ + at91_add_device_mmc(0, &flexibity_mmc_data); + /* LEDs */ + at91_gpio_leds(flexibity_leds, ARRAY_SIZE(flexibity_leds)); +} + +MACHINE_START(FLEXIBITY, "Flexibity Connect") + /* Maintainer: Maxim Osipov */ + .phys_io = AT91_BASE_SYS, + .io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc, + .boot_params = AT91_SDRAM_BASE + 0x100, + .timer = &at91sam926x_timer, + .map_io = flexibity_map_io, + .init_irq = flexibity_init_irq, + .init_machine = flexibity_board_init, +MACHINE_END -- cgit v1.2.3-70-g09d2