From d8723ae2a416473f8e974baadcb6acb7f8b0b485 Mon Sep 17 00:00:00 2001 From: Alistair Buxton Date: Tue, 22 Sep 2009 05:49:53 +0100 Subject: OMAP7XX: Serial: Remove duplicate omap850 code This patch is part of a series which unifies all duplicated code between omap730 and omap850. All cpu checks are converted to cpu_is_omap7xx() and CONFIG_ARCH_OMAP850 is added to all CONFIG_ARCH_OMAP730 checks. Signed-off-by: Alistair Buxton Reviewed-by: Zebediah C. McClure --- arch/arm/mach-omap1/serial.c | 9 +-------- 1 file changed, 1 insertion(+), 8 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap1/serial.c b/arch/arm/mach-omap1/serial.c index d496e50fec4..49381e271be 100644 --- a/arch/arm/mach-omap1/serial.c +++ b/arch/arm/mach-omap1/serial.c @@ -110,20 +110,13 @@ void __init omap_serial_init(void) { int i; - if (cpu_is_omap730()) { + if (cpu_is_omap7xx()) { serial_platform_data[0].regshift = 0; serial_platform_data[1].regshift = 0; serial_platform_data[0].irq = INT_730_UART_MODEM_1; serial_platform_data[1].irq = INT_730_UART_MODEM_IRDA_2; } - if (cpu_is_omap850()) { - serial_platform_data[0].regshift = 0; - serial_platform_data[1].regshift = 0; - serial_platform_data[0].irq = INT_850_UART_MODEM_1; - serial_platform_data[1].irq = INT_850_UART_MODEM_IRDA_2; - } - if (cpu_is_omap15xx()) { serial_platform_data[0].uartclk = OMAP1510_BASE_BAUD * 16; serial_platform_data[1].uartclk = OMAP1510_BASE_BAUD * 16; -- cgit v1.2.3-70-g09d2 From b718aa810b50e0d988d8b83f1011865b19b17491 Mon Sep 17 00:00:00 2001 From: Alistair Buxton Date: Wed, 23 Sep 2009 18:56:19 +0100 Subject: OMAP7XX: GPIO: Remove duplicate omap850 code This patch is part of a series which unifies all duplicated code between omap730 and omap850. All cpu checks are converted to cpu_is_omap7xx() and CONFIG_ARCH_OMAP850 is added to all CONFIG_ARCH_OMAP730 checks. Signed-off-by: Alistair Buxton Reviewed-by: Zebediah C. McClure --- arch/arm/plat-omap/gpio.c | 133 +++++----------------------------------------- 1 file changed, 14 insertions(+), 119 deletions(-) (limited to 'arch') diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c index 71ebd7fcfea..665ca050183 100644 --- a/arch/arm/plat-omap/gpio.c +++ b/arch/arm/plat-omap/gpio.c @@ -83,22 +83,6 @@ #define OMAP730_GPIO_INT_MASK 0x10 #define OMAP730_GPIO_INT_STATUS 0x14 -/* - * OMAP850 specific GPIO registers - */ -#define OMAP850_GPIO1_BASE OMAP1_IO_ADDRESS(0xfffbc000) -#define OMAP850_GPIO2_BASE OMAP1_IO_ADDRESS(0xfffbc800) -#define OMAP850_GPIO3_BASE OMAP1_IO_ADDRESS(0xfffbd000) -#define OMAP850_GPIO4_BASE OMAP1_IO_ADDRESS(0xfffbd800) -#define OMAP850_GPIO5_BASE OMAP1_IO_ADDRESS(0xfffbe000) -#define OMAP850_GPIO6_BASE OMAP1_IO_ADDRESS(0xfffbe800) -#define OMAP850_GPIO_DATA_INPUT 0x00 -#define OMAP850_GPIO_DATA_OUTPUT 0x04 -#define OMAP850_GPIO_DIR_CONTROL 0x08 -#define OMAP850_GPIO_INT_CONTROL 0x0c -#define OMAP850_GPIO_INT_MASK 0x10 -#define OMAP850_GPIO_INT_STATUS 0x14 - #define OMAP1_MPUIO_VBASE OMAP1_IO_ADDRESS(OMAP1_MPUIO_BASE) /* @@ -216,7 +200,6 @@ struct gpio_bank { #define METHOD_GPIO_1510 1 #define METHOD_GPIO_1610 2 #define METHOD_GPIO_730 3 -#define METHOD_GPIO_850 4 #define METHOD_GPIO_24XX 5 #ifdef CONFIG_ARCH_OMAP16XX @@ -236,7 +219,7 @@ static struct gpio_bank gpio_bank_1510[2] = { }; #endif -#ifdef CONFIG_ARCH_OMAP730 +#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) static struct gpio_bank gpio_bank_730[7] = { { OMAP1_MPUIO_VBASE, INT_730_MPUIO, IH_MPUIO_BASE, METHOD_MPUIO }, { OMAP730_GPIO1_BASE, INT_730_GPIO_BANK1, IH_GPIO_BASE, METHOD_GPIO_730 }, @@ -248,19 +231,6 @@ static struct gpio_bank gpio_bank_730[7] = { }; #endif -#ifdef CONFIG_ARCH_OMAP850 -static struct gpio_bank gpio_bank_850[7] = { - { OMAP1_MPUIO_VBASE, INT_850_MPUIO, IH_MPUIO_BASE, METHOD_MPUIO }, - { OMAP850_GPIO1_BASE, INT_850_GPIO_BANK1, IH_GPIO_BASE, METHOD_GPIO_850 }, - { OMAP850_GPIO2_BASE, INT_850_GPIO_BANK2, IH_GPIO_BASE + 32, METHOD_GPIO_850 }, - { OMAP850_GPIO3_BASE, INT_850_GPIO_BANK3, IH_GPIO_BASE + 64, METHOD_GPIO_850 }, - { OMAP850_GPIO4_BASE, INT_850_GPIO_BANK4, IH_GPIO_BASE + 96, METHOD_GPIO_850 }, - { OMAP850_GPIO5_BASE, INT_850_GPIO_BANK5, IH_GPIO_BASE + 128, METHOD_GPIO_850 }, - { OMAP850_GPIO6_BASE, INT_850_GPIO_BANK6, IH_GPIO_BASE + 160, METHOD_GPIO_850 }, -}; -#endif - - #ifdef CONFIG_ARCH_OMAP24XX static struct gpio_bank gpio_bank_242x[4] = { @@ -402,16 +372,11 @@ static void _set_gpio_direction(struct gpio_bank *bank, int gpio, int is_input) reg += OMAP1610_GPIO_DIRECTION; break; #endif -#ifdef CONFIG_ARCH_OMAP730 +#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) case METHOD_GPIO_730: reg += OMAP730_GPIO_DIR_CONTROL; break; #endif -#ifdef CONFIG_ARCH_OMAP850 - case METHOD_GPIO_850: - reg += OMAP850_GPIO_DIR_CONTROL; - break; -#endif #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) case METHOD_GPIO_24XX: reg += OMAP24XX_GPIO_OE; @@ -469,7 +434,7 @@ static void _set_gpio_dataout(struct gpio_bank *bank, int gpio, int enable) l = 1 << gpio; break; #endif -#ifdef CONFIG_ARCH_OMAP730 +#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) case METHOD_GPIO_730: reg += OMAP730_GPIO_DATA_OUTPUT; l = __raw_readl(reg); @@ -479,16 +444,6 @@ static void _set_gpio_dataout(struct gpio_bank *bank, int gpio, int enable) l &= ~(1 << gpio); break; #endif -#ifdef CONFIG_ARCH_OMAP850 - case METHOD_GPIO_850: - reg += OMAP850_GPIO_DATA_OUTPUT; - l = __raw_readl(reg); - if (enable) - l |= 1 << gpio; - else - l &= ~(1 << gpio); - break; -#endif #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) case METHOD_GPIO_24XX: if (enable) @@ -537,16 +492,11 @@ static int _get_gpio_datain(struct gpio_bank *bank, int gpio) reg += OMAP1610_GPIO_DATAIN; break; #endif -#ifdef CONFIG_ARCH_OMAP730 +#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) case METHOD_GPIO_730: reg += OMAP730_GPIO_DATA_INPUT; break; #endif -#ifdef CONFIG_ARCH_OMAP850 - case METHOD_GPIO_850: - reg += OMAP850_GPIO_DATA_INPUT; - break; -#endif #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) case METHOD_GPIO_24XX: reg += OMAP24XX_GPIO_DATAIN; @@ -588,16 +538,11 @@ static int _get_gpio_dataout(struct gpio_bank *bank, int gpio) reg += OMAP1610_GPIO_DATAOUT; break; #endif -#ifdef CONFIG_ARCH_OMAP730 +#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) case METHOD_GPIO_730: reg += OMAP730_GPIO_DATA_OUTPUT; break; #endif -#ifdef CONFIG_ARCH_OMAP850 - case METHOD_GPIO_850: - reg += OMAP850_GPIO_DATA_OUTPUT; - break; -#endif #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \ defined(CONFIG_ARCH_OMAP4) case METHOD_GPIO_24XX: @@ -797,7 +742,7 @@ static int _set_gpio_triggering(struct gpio_bank *bank, int gpio, int trigger) __raw_writel(1 << gpio, bank->base + OMAP1610_GPIO_CLEAR_WAKEUPENA); break; #endif -#ifdef CONFIG_ARCH_OMAP730 +#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) case METHOD_GPIO_730: reg += OMAP730_GPIO_INT_CONTROL; l = __raw_readl(reg); @@ -809,18 +754,6 @@ static int _set_gpio_triggering(struct gpio_bank *bank, int gpio, int trigger) goto bad; break; #endif -#ifdef CONFIG_ARCH_OMAP850 - case METHOD_GPIO_850: - reg += OMAP850_GPIO_INT_CONTROL; - l = __raw_readl(reg); - if (trigger & IRQ_TYPE_EDGE_RISING) - l |= 1 << gpio; - else if (trigger & IRQ_TYPE_EDGE_FALLING) - l &= ~(1 << gpio); - else - goto bad; - break; -#endif #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \ defined(CONFIG_ARCH_OMAP4) case METHOD_GPIO_24XX: @@ -897,16 +830,11 @@ static void _clear_gpio_irqbank(struct gpio_bank *bank, int gpio_mask) reg += OMAP1610_GPIO_IRQSTATUS1; break; #endif -#ifdef CONFIG_ARCH_OMAP730 +#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) case METHOD_GPIO_730: reg += OMAP730_GPIO_INT_STATUS; break; #endif -#ifdef CONFIG_ARCH_OMAP850 - case METHOD_GPIO_850: - reg += OMAP850_GPIO_INT_STATUS; - break; -#endif #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) case METHOD_GPIO_24XX: reg += OMAP24XX_GPIO_IRQSTATUS1; @@ -971,20 +899,13 @@ static u32 _get_gpio_irqbank_mask(struct gpio_bank *bank) mask = 0xffff; break; #endif -#ifdef CONFIG_ARCH_OMAP730 +#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) case METHOD_GPIO_730: reg += OMAP730_GPIO_INT_MASK; mask = 0xffffffff; inv = 1; break; #endif -#ifdef CONFIG_ARCH_OMAP850 - case METHOD_GPIO_850: - reg += OMAP850_GPIO_INT_MASK; - mask = 0xffffffff; - inv = 1; - break; -#endif #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) case METHOD_GPIO_24XX: reg += OMAP24XX_GPIO_IRQENABLE1; @@ -1044,7 +965,7 @@ static void _enable_gpio_irqbank(struct gpio_bank *bank, int gpio_mask, int enab l = gpio_mask; break; #endif -#ifdef CONFIG_ARCH_OMAP730 +#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) case METHOD_GPIO_730: reg += OMAP730_GPIO_INT_MASK; l = __raw_readl(reg); @@ -1054,16 +975,6 @@ static void _enable_gpio_irqbank(struct gpio_bank *bank, int gpio_mask, int enab l |= gpio_mask; break; #endif -#ifdef CONFIG_ARCH_OMAP850 - case METHOD_GPIO_850: - reg += OMAP850_GPIO_INT_MASK; - l = __raw_readl(reg); - if (enable) - l &= ~(gpio_mask); - else - l |= gpio_mask; - break; -#endif #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) case METHOD_GPIO_24XX: if (enable) @@ -1249,14 +1160,10 @@ static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc) if (bank->method == METHOD_GPIO_1610) isr_reg = bank->base + OMAP1610_GPIO_IRQSTATUS1; #endif -#ifdef CONFIG_ARCH_OMAP730 +#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) if (bank->method == METHOD_GPIO_730) isr_reg = bank->base + OMAP730_GPIO_INT_STATUS; #endif -#ifdef CONFIG_ARCH_OMAP850 - if (bank->method == METHOD_GPIO_850) - isr_reg = bank->base + OMAP850_GPIO_INT_STATUS; -#endif #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) if (bank->method == METHOD_GPIO_24XX) isr_reg = bank->base + OMAP24XX_GPIO_IRQSTATUS1; @@ -1527,9 +1434,6 @@ static int gpio_is_input(struct gpio_bank *bank, int mask) case METHOD_GPIO_730: reg += OMAP730_GPIO_DIR_CONTROL; break; - case METHOD_GPIO_850: - reg += OMAP850_GPIO_DIR_CONTROL; - break; case METHOD_GPIO_24XX: reg += OMAP24XX_GPIO_OE; break; @@ -1695,21 +1599,13 @@ static int __init _omap_gpio_init(void) (rev >> 4) & 0x0f, rev & 0x0f); } #endif -#ifdef CONFIG_ARCH_OMAP730 - if (cpu_is_omap730()) { - printk(KERN_INFO "OMAP730 GPIO hardware\n"); +#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) + if (cpu_is_omap7xx()) { + printk(KERN_INFO "OMAP7XX GPIO hardware\n"); gpio_bank_count = 7; gpio_bank = gpio_bank_730; } #endif -#ifdef CONFIG_ARCH_OMAP850 - if (cpu_is_omap850()) { - printk(KERN_INFO "OMAP850 GPIO hardware\n"); - gpio_bank_count = 7; - gpio_bank = gpio_bank_850; - } -#endif - #ifdef CONFIG_ARCH_OMAP24XX if (cpu_is_omap242x()) { int rev; @@ -2160,8 +2056,7 @@ static int dbg_gpio_show(struct seq_file *s, void *unused) if (bank_is_mpuio(bank)) gpio = OMAP_MPUIO(0); - else if (cpu_class_is_omap2() || cpu_is_omap730() || - cpu_is_omap850()) + else if (cpu_class_is_omap2() || cpu_is_omap7xx()) bankwidth = 32; for (j = 0; j < bankwidth; j++, gpio++, mask <<= 1) { -- cgit v1.2.3-70-g09d2 From ab49df737d28c67eb6a5cb5be40dbab43fd7582c Mon Sep 17 00:00:00 2001 From: Alistair Buxton Date: Tue, 22 Sep 2009 05:58:08 +0100 Subject: OMAP7XX: IO: Remove duplicate omap850 code This patch is part of a series which unifies all duplicated code between omap730 and omap850. All cpu checks are converted to cpu_is_omap7xx() and CONFIG_ARCH_OMAP850 is added to all CONFIG_ARCH_OMAP730 checks. Signed-off-by: Alistair Buxton Reviewed-by: Zebediah C. McClure --- arch/arm/mach-omap1/io.c | 29 +++-------------------------- arch/arm/plat-omap/io.c | 2 +- 2 files changed, 4 insertions(+), 27 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap1/io.c b/arch/arm/mach-omap1/io.c index 7030f9281ea..19de57f74e8 100644 --- a/arch/arm/mach-omap1/io.c +++ b/arch/arm/mach-omap1/io.c @@ -36,7 +36,7 @@ static struct map_desc omap_io_desc[] __initdata = { } }; -#ifdef CONFIG_ARCH_OMAP730 +#if defined (CONFIG_ARCH_OMAP730) || defined (CONFIG_ARCH_OMAP850) static struct map_desc omap730_io_desc[] __initdata = { { .virtual = OMAP730_DSP_BASE, @@ -52,22 +52,6 @@ static struct map_desc omap730_io_desc[] __initdata = { }; #endif -#ifdef CONFIG_ARCH_OMAP850 -static struct map_desc omap850_io_desc[] __initdata = { - { - .virtual = OMAP850_DSP_BASE, - .pfn = __phys_to_pfn(OMAP850_DSP_START), - .length = OMAP850_DSP_SIZE, - .type = MT_DEVICE - }, { - .virtual = OMAP850_DSPREG_BASE, - .pfn = __phys_to_pfn(OMAP850_DSPREG_START), - .length = OMAP850_DSPREG_SIZE, - .type = MT_DEVICE - } -}; -#endif - #ifdef CONFIG_ARCH_OMAP15XX static struct map_desc omap1510_io_desc[] __initdata = { { @@ -120,18 +104,11 @@ void __init omap1_map_common_io(void) */ omap_check_revision(); -#ifdef CONFIG_ARCH_OMAP730 - if (cpu_is_omap730()) { +#if defined (CONFIG_ARCH_OMAP730) || defined (CONFIG_ARCH_OMAP850) + if (cpu_is_omap7xx()) { iotable_init(omap730_io_desc, ARRAY_SIZE(omap730_io_desc)); } #endif - -#ifdef CONFIG_ARCH_OMAP850 - if (cpu_is_omap850()) { - iotable_init(omap850_io_desc, ARRAY_SIZE(omap850_io_desc)); - } -#endif - #ifdef CONFIG_ARCH_OMAP15XX if (cpu_is_omap15xx()) { iotable_init(omap1510_io_desc, ARRAY_SIZE(omap1510_io_desc)); diff --git a/arch/arm/plat-omap/io.c b/arch/arm/plat-omap/io.c index b6defa23e77..388fd949093 100644 --- a/arch/arm/plat-omap/io.c +++ b/arch/arm/plat-omap/io.c @@ -33,7 +33,7 @@ void __iomem *omap_ioremap(unsigned long p, size_t size, unsigned int type) if (BETWEEN(p, OMAP1_IO_PHYS, OMAP1_IO_SIZE)) return XLATE(p, OMAP1_IO_PHYS, OMAP1_IO_VIRT); } - if (cpu_is_omap730()) { + if (cpu_is_omap7xx()) { if (BETWEEN(p, OMAP730_DSP_BASE, OMAP730_DSP_SIZE)) return XLATE(p, OMAP730_DSP_BASE, OMAP730_DSP_START); -- cgit v1.2.3-70-g09d2 From 190215f963551405cc97ed220003bb7524219131 Mon Sep 17 00:00:00 2001 From: Alistair Buxton Date: Tue, 22 Sep 2009 05:58:54 +0100 Subject: OMAP7XX: Mux: Remove duplicate omap850 code This patch is part of a series which unifies all duplicated code between omap730 and omap850. All cpu checks are converted to cpu_is_omap7xx() and CONFIG_ARCH_OMAP850 is added to all CONFIG_ARCH_OMAP730 checks. Signed-off-by: Alistair Buxton Reviewed-by: Zebediah C. McClure --- arch/arm/mach-omap1/mux.c | 28 ++------------------ arch/arm/plat-omap/include/mach/mux.h | 50 ----------------------------------- 2 files changed, 2 insertions(+), 76 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap1/mux.c b/arch/arm/mach-omap1/mux.c index 721e0d9d8b1..f9d45a3bf4f 100644 --- a/arch/arm/mach-omap1/mux.c +++ b/arch/arm/mach-omap1/mux.c @@ -35,7 +35,7 @@ static struct omap_mux_cfg arch_mux_cfg; -#ifdef CONFIG_ARCH_OMAP730 +#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) static struct pin_config __initdata_or_module omap730_pins[] = { MUX_CFG_730("E2_730_KBR0", 12, 21, 0, 20, 1, 0) MUX_CFG_730("J7_730_KBR1", 12, 25, 0, 24, 1, 0) @@ -58,25 +58,6 @@ MUX_CFG_730("W17_730_USB_VBUSI", 2, 29, 0, 28, 0, 0) #define OMAP730_PINS_SZ 0 #endif /* CONFIG_ARCH_OMAP730 */ -#ifdef CONFIG_ARCH_OMAP850 -struct pin_config __initdata_or_module omap850_pins[] = { -MUX_CFG_850("E2_850_KBR0", 12, 21, 0, 20, 1, 0) -MUX_CFG_850("J7_850_KBR1", 12, 25, 0, 24, 1, 0) -MUX_CFG_850("E1_850_KBR2", 12, 29, 0, 28, 1, 0) -MUX_CFG_850("F3_850_KBR3", 13, 1, 0, 0, 1, 0) -MUX_CFG_850("D2_850_KBR4", 13, 5, 0, 4, 1, 0) -MUX_CFG_850("C2_850_KBC0", 13, 9, 0, 8, 1, 0) -MUX_CFG_850("D3_850_KBC1", 13, 13, 0, 12, 1, 0) -MUX_CFG_850("E4_850_KBC2", 13, 17, 0, 16, 1, 0) -MUX_CFG_850("F4_850_KBC3", 13, 21, 0, 20, 1, 0) -MUX_CFG_850("E3_850_KBC4", 13, 25, 0, 24, 1, 0) - -MUX_CFG_850("AA17_850_USB_DM", 2, 21, 0, 20, 0, 0) -MUX_CFG_850("W16_850_USB_PU_EN", 2, 25, 0, 24, 0, 0) -MUX_CFG_850("W17_850_USB_VBUSI", 2, 29, 0, 28, 0, 0) -}; -#endif - #if defined(CONFIG_ARCH_OMAP15XX) || defined(CONFIG_ARCH_OMAP16XX) static struct pin_config __initdata_or_module omap1xxx_pins[] = { /* @@ -438,11 +419,6 @@ int __init_or_module omap1_cfg_reg(const struct pin_config *cfg) printk(" %s (0x%08x) = 0x%08x -> 0x%08x\n", cfg->pull_name, cfg->pull_reg, pull_orig, pull); } - -#ifdef CONFIG_ARCH_OMAP850 - omap_mux_register(omap850_pins, ARRAY_SIZE(omap850_pins)); -#endif - #endif #ifdef CONFIG_OMAP_MUX_ERRORS @@ -454,7 +430,7 @@ int __init_or_module omap1_cfg_reg(const struct pin_config *cfg) int __init omap1_mux_init(void) { - if (cpu_is_omap730()) { + if (cpu_is_omap7xx()) { arch_mux_cfg.pins = omap730_pins; arch_mux_cfg.size = OMAP730_PINS_SZ; arch_mux_cfg.cfg_reg = omap1_cfg_reg; diff --git a/arch/arm/plat-omap/include/mach/mux.h b/arch/arm/plat-omap/include/mach/mux.h index 0f49d2d563d..587fb63d232 100644 --- a/arch/arm/plat-omap/include/mach/mux.h +++ b/arch/arm/plat-omap/include/mach/mux.h @@ -61,16 +61,6 @@ .pull_bit = bit, \ .pull_val = status, -#define MUX_REG_850(reg, mode_offset, mode) .mux_reg_name = "OMAP850_IO_CONF_"#reg, \ - .mux_reg = OMAP850_IO_CONF_##reg, \ - .mask_offset = mode_offset, \ - .mask = mode, - -#define PULL_REG_850(reg, bit, status) .pull_name = "OMAP850_IO_CONF_"#reg, \ - .pull_reg = OMAP850_IO_CONF_##reg, \ - .pull_bit = bit, \ - .pull_val = status, - #else #define MUX_REG(reg, mode_offset, mode) .mux_reg = FUNC_MUX_CTRL_##reg, \ @@ -93,15 +83,6 @@ .pull_bit = bit, \ .pull_val = status, -#define MUX_REG_850(reg, mode_offset, mode) \ - .mux_reg = OMAP850_IO_CONF_##reg, \ - .mask_offset = mode_offset, \ - .mask = mode, - -#define PULL_REG_850(reg, bit, status) .pull_reg = OMAP850_IO_CONF_##reg, \ - .pull_bit = bit, \ - .pull_val = status, - #endif /* CONFIG_OMAP_MUX_DEBUG */ #define MUX_CFG(desc, mux_reg, mode_offset, mode, \ @@ -133,17 +114,6 @@ PU_PD_REG(NA, 0) \ }, -#define MUX_CFG_850(desc, mux_reg, mode_offset, mode, \ - pull_bit, pull_status, debug_status)\ -{ \ - .name = desc, \ - .debug = debug_status, \ - MUX_REG_850(mux_reg, mode_offset, mode) \ - PULL_REG_850(mux_reg, pull_bit, pull_status) \ - PU_PD_REG(NA, 0) \ -}, - - #define MUX_CFG_24XX(desc, reg_offset, mode, \ pull_en, pull_mode, dbg) \ { \ @@ -251,26 +221,6 @@ enum omap730_index { W17_730_USB_VBUSI, }; -enum omap850_index { - /* OMAP 850 keyboard */ - E2_850_KBR0, - J7_850_KBR1, - E1_850_KBR2, - F3_850_KBR3, - D2_850_KBR4, - C2_850_KBC0, - D3_850_KBC1, - E4_850_KBC2, - F4_850_KBC3, - E3_850_KBC4, - - /* USB */ - AA17_850_USB_DM, - W16_850_USB_PU_EN, - W17_850_USB_VBUSI, -}; - - enum omap1xxx_index { /* UART1 (BT_UART_GATING)*/ UART1_TX = 0, -- cgit v1.2.3-70-g09d2 From 207b0e9cfef296c469cce84f74455f97f8ab2227 Mon Sep 17 00:00:00 2001 From: Alistair Buxton Date: Tue, 22 Sep 2009 06:01:08 +0100 Subject: OMAP7XX: USB: Remove duplicate omap850 code This patch is part of a series which unifies all duplicated code between omap730 and omap850. All cpu checks are converted to cpu_is_omap7xx() and CONFIG_ARCH_OMAP850 is added to all CONFIG_ARCH_OMAP730 checks. Signed-off-by: Alistair Buxton Reviewed-by: Zebediah C. McClure --- arch/arm/plat-omap/usb.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/arm/plat-omap/usb.c b/arch/arm/plat-omap/usb.c index 509f2ed99e2..980d2eb68a2 100644 --- a/arch/arm/plat-omap/usb.c +++ b/arch/arm/plat-omap/usb.c @@ -614,7 +614,7 @@ omap_otg_init(struct omap_usb_config *config) if (config->otg || config->register_host) { syscon &= ~HST_IDLE_EN; ohci_device.dev.platform_data = config; - if (cpu_is_omap730()) + if (cpu_is_omap7xx()) ohci_resources[1].start = INT_730_USB_HHC_1; status = platform_device_register(&ohci_device); if (status) @@ -626,7 +626,7 @@ omap_otg_init(struct omap_usb_config *config) if (config->otg) { syscon &= ~OTG_IDLE_EN; otg_device.dev.platform_data = config; - if (cpu_is_omap730()) + if (cpu_is_omap7xx()) otg_resources[1].start = INT_730_USB_OTG; status = platform_device_register(&otg_device); if (status) @@ -731,7 +731,7 @@ static inline void omap_1510_usb_init(struct omap_usb_config *config) {} void __init omap_usb_init(struct omap_usb_config *pdata) { - if (cpu_is_omap730() || cpu_is_omap16xx() || cpu_is_omap24xx()) + if (cpu_is_omap7xx() || cpu_is_omap16xx() || cpu_is_omap24xx()) omap_otg_init(pdata); else if (cpu_is_omap15xx()) omap_1510_usb_init(pdata); -- cgit v1.2.3-70-g09d2 From 559663b980c8293b3624b4d91d08efc71f6fae82 Mon Sep 17 00:00:00 2001 From: Alistair Buxton Date: Tue, 22 Sep 2009 06:33:04 +0100 Subject: OMAP7XX: IRQ: Remove duplicate omap850 code This patch is part of a series which unifies all duplicated code between omap730 and omap850. All cpu checks are converted to cpu_is_omap7xx() and CONFIG_ARCH_OMAP850 is added to all CONFIG_ARCH_OMAP730 checks. This fixes a bug which prevents IRQs from being enabled on omap850 due to a missing check in entry-macro.S, which was found by Cory Maccarrone. Signed-off-by: Alistair Buxton Reviewed-by: Zebediah C. McClure --- arch/arm/mach-omap1/irq.c | 24 ++------ arch/arm/plat-omap/include/mach/entry-macro.S | 6 +- arch/arm/plat-omap/include/mach/irqs.h | 81 --------------------------- 3 files changed, 7 insertions(+), 104 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap1/irq.c b/arch/arm/mach-omap1/irq.c index de03c844899..c05999c4116 100644 --- a/arch/arm/mach-omap1/irq.c +++ b/arch/arm/mach-omap1/irq.c @@ -137,7 +137,7 @@ static void omap_irq_set_cfg(int irq, int fiq, int priority, int trigger) irq_bank_writel(val, bank, offset); } -#ifdef CONFIG_ARCH_OMAP730 +#if defined (CONFIG_ARCH_OMAP730) || defined (CONFIG_ARCH_OMAP850) static struct omap_irq_bank omap730_irq_banks[] = { { .base_reg = OMAP_IH1_BASE, .trigger_map = 0xb3f8e22f }, { .base_reg = OMAP_IH2_BASE, .trigger_map = 0xfdb9c1f2 }, @@ -145,14 +145,6 @@ static struct omap_irq_bank omap730_irq_banks[] = { }; #endif -#ifdef CONFIG_ARCH_OMAP850 -static struct omap_irq_bank omap850_irq_banks[] = { - { .base_reg = OMAP_IH1_BASE, .trigger_map = 0xb3f8e22f }, - { .base_reg = OMAP_IH2_BASE, .trigger_map = 0xfdb9c1f2 }, - { .base_reg = OMAP_IH2_BASE + 0x100, .trigger_map = 0x800040f3 }, -}; -#endif - #ifdef CONFIG_ARCH_OMAP15XX static struct omap_irq_bank omap1510_irq_banks[] = { { .base_reg = OMAP_IH1_BASE, .trigger_map = 0xb3febfff }, @@ -186,18 +178,12 @@ void __init omap_init_irq(void) { int i, j; -#ifdef CONFIG_ARCH_OMAP730 - if (cpu_is_omap730()) { +#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) + if (cpu_is_omap7xx()) { irq_banks = omap730_irq_banks; irq_bank_count = ARRAY_SIZE(omap730_irq_banks); } #endif -#ifdef CONFIG_ARCH_OMAP850 - if (cpu_is_omap850()) { - irq_banks = omap850_irq_banks; - irq_bank_count = ARRAY_SIZE(omap850_irq_banks); - } -#endif #ifdef CONFIG_ARCH_OMAP15XX if (cpu_is_omap1510()) { irq_banks = omap1510_irq_banks; @@ -247,10 +233,8 @@ void __init omap_init_irq(void) /* Unmask level 2 handler */ - if (cpu_is_omap730()) + if (cpu_is_omap7xx()) omap_unmask_irq(INT_730_IH2_IRQ); - else if (cpu_is_omap850()) - omap_unmask_irq(INT_850_IH2_IRQ); else if (cpu_is_omap15xx()) omap_unmask_irq(INT_1510_IH2_IRQ); else if (cpu_is_omap16xx()) diff --git a/arch/arm/plat-omap/include/mach/entry-macro.S b/arch/arm/plat-omap/include/mach/entry-macro.S index a5592991634..bcf71585665 100644 --- a/arch/arm/plat-omap/include/mach/entry-macro.S +++ b/arch/arm/plat-omap/include/mach/entry-macro.S @@ -17,10 +17,10 @@ #if defined(CONFIG_ARCH_OMAP1) -#if defined(CONFIG_ARCH_OMAP730) && \ +#if (defined(CONFIG_ARCH_OMAP730)||defined(CONFIG_ARCH_OMAP850)) && \ (defined(CONFIG_ARCH_OMAP15XX) || defined(CONFIG_ARCH_OMAP16XX)) -#error "FIXME: OMAP730 doesn't support multiple-OMAP" -#elif defined(CONFIG_ARCH_OMAP730) +#error "FIXME: OMAP7XX doesn't support multiple-OMAP" +#elif defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) #define INT_IH2_IRQ INT_730_IH2_IRQ #elif defined(CONFIG_ARCH_OMAP15XX) #define INT_IH2_IRQ INT_1510_IH2_IRQ diff --git a/arch/arm/plat-omap/include/mach/irqs.h b/arch/arm/plat-omap/include/mach/irqs.h index 28a165058b6..7f338f0c745 100644 --- a/arch/arm/plat-omap/include/mach/irqs.h +++ b/arch/arm/plat-omap/include/mach/irqs.h @@ -107,29 +107,6 @@ #define INT_730_GPIO_BANK6 18 #define INT_730_SPGIO_WR 29 -/* - * OMAP-850 specific IRQ numbers for interrupt handler 1 - */ -#define INT_850_IH2_FIQ 0 -#define INT_850_IH2_IRQ 1 -#define INT_850_USB_NON_ISO 2 -#define INT_850_USB_ISO 3 -#define INT_850_ICR 4 -#define INT_850_EAC 5 -#define INT_850_GPIO_BANK1 6 -#define INT_850_GPIO_BANK2 7 -#define INT_850_GPIO_BANK3 8 -#define INT_850_McBSP2TX 10 -#define INT_850_McBSP2RX 11 -#define INT_850_McBSP2RX_OVF 12 -#define INT_850_LCD_LINE 14 -#define INT_850_GSM_PROTECT 15 -#define INT_850_TIMER3 16 -#define INT_850_GPIO_BANK5 17 -#define INT_850_GPIO_BANK6 18 -#define INT_850_SPGIO_WR 29 - - /* * IRQ numbers for interrupt handler 2 * @@ -263,64 +240,6 @@ #define INT_730_DMA_CH15 (62 + IH2_BASE) #define INT_730_NAND (63 + IH2_BASE) -/* - * OMAP-850 specific IRQ numbers for interrupt handler 2 - */ -#define INT_850_HW_ERRORS (0 + IH2_BASE) -#define INT_850_NFIQ_PWR_FAIL (1 + IH2_BASE) -#define INT_850_CFCD (2 + IH2_BASE) -#define INT_850_CFIREQ (3 + IH2_BASE) -#define INT_850_I2C (4 + IH2_BASE) -#define INT_850_PCC (5 + IH2_BASE) -#define INT_850_MPU_EXT_NIRQ (6 + IH2_BASE) -#define INT_850_SPI_100K_1 (7 + IH2_BASE) -#define INT_850_SYREN_SPI (8 + IH2_BASE) -#define INT_850_VLYNQ (9 + IH2_BASE) -#define INT_850_GPIO_BANK4 (10 + IH2_BASE) -#define INT_850_McBSP1TX (11 + IH2_BASE) -#define INT_850_McBSP1RX (12 + IH2_BASE) -#define INT_850_McBSP1RX_OF (13 + IH2_BASE) -#define INT_850_UART_MODEM_IRDA_2 (14 + IH2_BASE) -#define INT_850_UART_MODEM_1 (15 + IH2_BASE) -#define INT_850_MCSI (16 + IH2_BASE) -#define INT_850_uWireTX (17 + IH2_BASE) -#define INT_850_uWireRX (18 + IH2_BASE) -#define INT_850_SMC_CD (19 + IH2_BASE) -#define INT_850_SMC_IREQ (20 + IH2_BASE) -#define INT_850_HDQ_1WIRE (21 + IH2_BASE) -#define INT_850_TIMER32K (22 + IH2_BASE) -#define INT_850_MMC_SDIO (23 + IH2_BASE) -#define INT_850_UPLD (24 + IH2_BASE) -#define INT_850_USB_HHC_1 (27 + IH2_BASE) -#define INT_850_USB_HHC_2 (28 + IH2_BASE) -#define INT_850_USB_GENI (29 + IH2_BASE) -#define INT_850_USB_OTG (30 + IH2_BASE) -#define INT_850_CAMERA_IF (31 + IH2_BASE) -#define INT_850_RNG (32 + IH2_BASE) -#define INT_850_DUAL_MODE_TIMER (33 + IH2_BASE) -#define INT_850_DBB_RF_EN (34 + IH2_BASE) -#define INT_850_MPUIO_KEYPAD (35 + IH2_BASE) -#define INT_850_SHA1_MD5 (36 + IH2_BASE) -#define INT_850_SPI_100K_2 (37 + IH2_BASE) -#define INT_850_RNG_IDLE (38 + IH2_BASE) -#define INT_850_MPUIO (39 + IH2_BASE) -#define INT_850_LLPC_LCD_CTRL_CAN_BE_OFF (40 + IH2_BASE) -#define INT_850_LLPC_OE_FALLING (41 + IH2_BASE) -#define INT_850_LLPC_OE_RISING (42 + IH2_BASE) -#define INT_850_LLPC_VSYNC (43 + IH2_BASE) -#define INT_850_WAKE_UP_REQ (46 + IH2_BASE) -#define INT_850_DMA_CH6 (53 + IH2_BASE) -#define INT_850_DMA_CH7 (54 + IH2_BASE) -#define INT_850_DMA_CH8 (55 + IH2_BASE) -#define INT_850_DMA_CH9 (56 + IH2_BASE) -#define INT_850_DMA_CH10 (57 + IH2_BASE) -#define INT_850_DMA_CH11 (58 + IH2_BASE) -#define INT_850_DMA_CH12 (59 + IH2_BASE) -#define INT_850_DMA_CH13 (60 + IH2_BASE) -#define INT_850_DMA_CH14 (61 + IH2_BASE) -#define INT_850_DMA_CH15 (62 + IH2_BASE) -#define INT_850_NAND (63 + IH2_BASE) - #define INT_24XX_SYS_NIRQ 7 #define INT_24XX_SDMA_IRQ0 12 #define INT_24XX_SDMA_IRQ1 13 -- cgit v1.2.3-70-g09d2 From 4b9100dde2820296003940ffd81e006c33c9bf5d Mon Sep 17 00:00:00 2001 From: Alistair Buxton Date: Tue, 22 Sep 2009 06:41:09 +0100 Subject: OMAP7XX: PM: Add omap850 support This patch is part of a series which unifies all duplicated code between omap730 and omap850. All cpu checks are converted to cpu_is_omap7xx() and CONFIG_ARCH_OMAP850 is added to all CONFIG_ARCH_OMAP730 checks. This file had no omap850 specific code. Original omap850 support in Linwizard was done by cloning the omap730 code. That work was done by Zebediah C. McClure. Signed-off-by: Alistair Buxton Reviewed-by: Zebediah C. McClure --- arch/arm/mach-omap1/pm.c | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap1/pm.c b/arch/arm/mach-omap1/pm.c index 5218943c91c..12f246e3cdc 100644 --- a/arch/arm/mach-omap1/pm.c +++ b/arch/arm/mach-omap1/pm.c @@ -183,7 +183,7 @@ static void omap_pm_wakeup_setup(void) * drivers must still separately call omap_set_gpio_wakeup() to * wake up to a GPIO interrupt. */ - if (cpu_is_omap730()) + if (cpu_is_omap7xx()) level1_wake = OMAP_IRQ_BIT(INT_730_GPIO_BANK1) | OMAP_IRQ_BIT(INT_730_IH2_IRQ); else if (cpu_is_omap15xx()) @@ -195,7 +195,7 @@ static void omap_pm_wakeup_setup(void) omap_writel(~level1_wake, OMAP_IH1_MIR); - if (cpu_is_omap730()) { + if (cpu_is_omap7xx()) { omap_writel(~level2_wake, OMAP_IH2_0_MIR); omap_writel(~(OMAP_IRQ_BIT(INT_730_WAKE_UP_REQ) | OMAP_IRQ_BIT(INT_730_MPUIO_KEYPAD)), @@ -253,7 +253,7 @@ void omap1_pm_suspend(void) * Save interrupt, MPUI, ARM and UPLD control registers. */ - if (cpu_is_omap730()) { + if (cpu_is_omap7xx()) { MPUI730_SAVE(OMAP_IH1_MIR); MPUI730_SAVE(OMAP_IH2_0_MIR); MPUI730_SAVE(OMAP_IH2_1_MIR); @@ -306,7 +306,7 @@ void omap1_pm_suspend(void) omap_writew(omap_readw(ARM_RSTCT1) & ~(1 << DSP_EN), ARM_RSTCT1); /* shut down dsp_ck */ - if (!cpu_is_omap730()) + if (!cpu_is_omap7xx()) omap_writew(omap_readw(ARM_CKCTL) & ~(1 << EN_DSPCK), ARM_CKCTL); /* temporarily enabling api_ck to access DSP registers */ @@ -383,7 +383,7 @@ void omap1_pm_suspend(void) ULPD_RESTORE(ULPD_CLOCK_CTRL); ULPD_RESTORE(ULPD_STATUS_REQ); - if (cpu_is_omap730()) { + if (cpu_is_omap7xx()) { MPUI730_RESTORE(EMIFS_CONFIG); MPUI730_RESTORE(EMIFF_SDRAM_CONFIG); MPUI730_RESTORE(OMAP_IH1_MIR); @@ -461,7 +461,7 @@ static int omap_pm_read_proc( ULPD_SAVE(ULPD_DPLL_CTRL); ULPD_SAVE(ULPD_POWER_CTRL); - if (cpu_is_omap730()) { + if (cpu_is_omap7xx()) { MPUI730_SAVE(MPUI_CTRL); MPUI730_SAVE(MPUI_DSP_STATUS); MPUI730_SAVE(MPUI_DSP_BOOT_CONFIG); @@ -517,7 +517,7 @@ static int omap_pm_read_proc( ULPD_SHOW(ULPD_STATUS_REQ), ULPD_SHOW(ULPD_POWER_CTRL)); - if (cpu_is_omap730()) { + if (cpu_is_omap7xx()) { my_buffer_offset += sprintf(my_base + my_buffer_offset, "MPUI730_CTRL_REG 0x%-8x \n" "MPUI730_DSP_STATUS_REG: 0x%-8x \n" @@ -668,7 +668,7 @@ static int __init omap_pm_init(void) * These routines need to be in SRAM as that's the only * memory the MPU can see when it wakes up. */ - if (cpu_is_omap730()) { + if (cpu_is_omap7xx()) { omap_sram_suspend = omap_sram_push(omap730_cpu_suspend, omap730_cpu_suspend_sz); } else if (cpu_is_omap15xx()) { @@ -686,7 +686,7 @@ static int __init omap_pm_init(void) pm_idle = omap1_pm_idle; - if (cpu_is_omap730()) + if (cpu_is_omap7xx()) setup_irq(INT_730_WAKE_UP_REQ, &omap_wakeup_irq); else if (cpu_is_omap16xx()) setup_irq(INT_1610_WAKE_UP_REQ, &omap_wakeup_irq); @@ -700,7 +700,7 @@ static int __init omap_pm_init(void) omap_writew(ULPD_POWER_CTRL_REG_VAL, ULPD_POWER_CTRL); /* Configure IDLECT3 */ - if (cpu_is_omap730()) + if (cpu_is_omap7xx()) omap_writel(OMAP730_IDLECT3_VAL, OMAP730_IDLECT3); else if (cpu_is_omap16xx()) omap_writel(OMAP1610_IDLECT3_VAL, OMAP1610_IDLECT3); -- cgit v1.2.3-70-g09d2 From 39a8b08610a10f3456ef9f4a38986d0407f1c57e Mon Sep 17 00:00:00 2001 From: Alistair Buxton Date: Tue, 22 Sep 2009 06:47:14 +0100 Subject: OMAP7XX: Clocks: Add omap850 support This patch is part of a series which unifies all duplicated code between omap730 and omap850. All cpu checks are converted to cpu_is_omap7xx() and CONFIG_ARCH_OMAP850 is added to all CONFIG_ARCH_OMAP730 checks. This file had no omap850 specific code. Initial clock support was done in the Linwizard tree by Zebediah C. McClure. Signed-off-by: Alistair Buxton Reviewed-by: Zebediah C. McClure --- arch/arm/mach-omap1/clock.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap1/clock.c b/arch/arm/mach-omap1/clock.c index 436eed22801..fcbea61cb8c 100644 --- a/arch/arm/mach-omap1/clock.c +++ b/arch/arm/mach-omap1/clock.c @@ -398,7 +398,7 @@ static int omap1_select_table_rate(struct clk * clk, unsigned long rate) * Reprogramming the DPLL is tricky, it must be done from SRAM. * (on 730, bit 13 must always be 1) */ - if (cpu_is_omap730()) + if (cpu_is_omap7xx()) omap_sram_reprogram_clock(ptr->dpllctl_val, ptr->ckctl_val | 0x2000); else omap_sram_reprogram_clock(ptr->dpllctl_val, ptr->ckctl_val); @@ -783,7 +783,7 @@ int __init omap1_clk_init(void) cpu_mask |= CK_16XX; if (cpu_is_omap1510()) cpu_mask |= CK_1510; - if (cpu_is_omap730()) + if (cpu_is_omap7xx()) cpu_mask |= CK_730; if (cpu_is_omap310()) cpu_mask |= CK_310; @@ -800,7 +800,7 @@ int __init omap1_clk_init(void) crystal_type = info->system_clock_type; } -#if defined(CONFIG_ARCH_OMAP730) +#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) ck_ref.rate = 13000000; #elif defined(CONFIG_ARCH_OMAP16XX) if (crystal_type == 2) @@ -847,7 +847,7 @@ int __init omap1_clk_init(void) printk(KERN_ERR "System frequencies not set. Check your config.\n"); /* Guess sane values (60MHz) */ omap_writew(0x2290, DPLL_CTL); - omap_writew(cpu_is_omap730() ? 0x3005 : 0x1005, ARM_CKCTL); + omap_writew(cpu_is_omap7xx() ? 0x3005 : 0x1005, ARM_CKCTL); ck_dpll1.rate = 60000000; } #endif @@ -873,7 +873,7 @@ int __init omap1_clk_init(void) /* Turn off DSP and ARM_TIMXO. Make sure ARM_INTHCK is not divided */ /* (on 730, bit 13 must not be cleared) */ - if (cpu_is_omap730()) + if (cpu_is_omap7xx()) omap_writew(omap_readw(ARM_CKCTL) & 0x2fff, ARM_CKCTL); else omap_writew(omap_readw(ARM_CKCTL) & 0x0fff, ARM_CKCTL); -- cgit v1.2.3-70-g09d2 From bf1cb7eb4fe35e50798f03e00d3900db0474f7d0 Mon Sep 17 00:00:00 2001 From: Alistair Buxton Date: Tue, 22 Sep 2009 06:49:35 +0100 Subject: OMAP7XX: McBSP: Add omap850 support This patch is part of a series which unifies all duplicated code between omap730 and omap850. All cpu checks are converted to cpu_is_omap7xx() and CONFIG_ARCH_OMAP850 is added to all CONFIG_ARCH_OMAP730 checks. Signed-off-by: Alistair Buxton Reviewed-by: Zebediah C. McClure --- arch/arm/mach-omap1/mcbsp.c | 6 +++--- arch/arm/plat-omap/include/mach/mcbsp.h | 2 +- 2 files changed, 4 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap1/mcbsp.c b/arch/arm/mach-omap1/mcbsp.c index 505d98cfe50..06f380bf221 100644 --- a/arch/arm/mach-omap1/mcbsp.c +++ b/arch/arm/mach-omap1/mcbsp.c @@ -79,7 +79,7 @@ static struct omap_mcbsp_ops omap1_mcbsp_ops = { .free = omap1_mcbsp_free, }; -#ifdef CONFIG_ARCH_OMAP730 +#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) static struct omap_mcbsp_platform_data omap730_mcbsp_pdata[] = { { .phys_base = OMAP730_MCBSP1_BASE, @@ -172,7 +172,7 @@ static struct omap_mcbsp_platform_data omap16xx_mcbsp_pdata[] = { int __init omap1_mcbsp_init(void) { - if (cpu_is_omap730()) + if (cpu_is_omap7xx()) omap_mcbsp_count = OMAP730_MCBSP_PDATA_SZ; if (cpu_is_omap15xx()) omap_mcbsp_count = OMAP15XX_MCBSP_PDATA_SZ; @@ -184,7 +184,7 @@ int __init omap1_mcbsp_init(void) if (!mcbsp_ptr) return -ENOMEM; - if (cpu_is_omap730()) + if (cpu_is_omap7xx()) omap_mcbsp_register_board_cfg(omap730_mcbsp_pdata, OMAP730_MCBSP_PDATA_SZ); diff --git a/arch/arm/plat-omap/include/mach/mcbsp.h b/arch/arm/plat-omap/include/mach/mcbsp.h index e0d6eca222c..0b476b909aa 100644 --- a/arch/arm/plat-omap/include/mach/mcbsp.h +++ b/arch/arm/plat-omap/include/mach/mcbsp.h @@ -58,7 +58,7 @@ #define OMAP44XX_MCBSP3_BASE 0x49026000 #define OMAP44XX_MCBSP4_BASE 0x48074000 -#if defined(CONFIG_ARCH_OMAP15XX) || defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP730) +#if defined(CONFIG_ARCH_OMAP15XX) || defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) #define OMAP_MCBSP_REG_DRR2 0x00 #define OMAP_MCBSP_REG_DRR1 0x02 -- cgit v1.2.3-70-g09d2 From e6684f7132c6e6333e96407b06910bebaa4c1935 Mon Sep 17 00:00:00 2001 From: Alistair Buxton Date: Tue, 22 Sep 2009 07:22:56 +0100 Subject: OMAP7XX: Create omap7xx.h This patch is part of a series which removes references to omap730 in code which is shared with omap850, replacing them with references to omap7xx. This include file is intended to replace omap730.h and omap850.h All values defined herein are identical to those in both the old files. Signed-off-by: Alistair Buxton Reviewed-by: Zebediah C. McClure --- arch/arm/plat-omap/include/mach/omap7xx.h | 104 ++++++++++++++++++++++++++++++ 1 file changed, 104 insertions(+) create mode 100644 arch/arm/plat-omap/include/mach/omap7xx.h (limited to 'arch') diff --git a/arch/arm/plat-omap/include/mach/omap7xx.h b/arch/arm/plat-omap/include/mach/omap7xx.h new file mode 100644 index 00000000000..53f52414b0e --- /dev/null +++ b/arch/arm/plat-omap/include/mach/omap7xx.h @@ -0,0 +1,104 @@ +/* arch/arm/plat-omap/include/mach/omap7xx.h + * + * Hardware definitions for TI OMAP7XX processor. + * + * Cleanup for Linux-2.6 by Dirk Behme + * Adapted for omap850 by Zebediah C. McClure + * Adapted for omap7xx by Alistair Buxton + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef __ASM_ARCH_OMAP7XX_H +#define __ASM_ARCH_OMAP7XX_H + +/* + * ---------------------------------------------------------------------------- + * Base addresses + * ---------------------------------------------------------------------------- + */ + +/* Syntax: XX_BASE = Virtual base address, XX_START = Physical base address */ + +#define OMAP7XX_DSP_BASE 0xE0000000 +#define OMAP7XX_DSP_SIZE 0x50000 +#define OMAP7XX_DSP_START 0xE0000000 + +#define OMAP7XX_DSPREG_BASE 0xE1000000 +#define OMAP7XX_DSPREG_SIZE SZ_128K +#define OMAP7XX_DSPREG_START 0xE1000000 + +/* + * ---------------------------------------------------------------------------- + * OMAP7XX specific configuration registers + * ---------------------------------------------------------------------------- + */ +#define OMAP7XX_CONFIG_BASE 0xfffe1000 +#define OMAP7XX_IO_CONF_0 0xfffe1070 +#define OMAP7XX_IO_CONF_1 0xfffe1074 +#define OMAP7XX_IO_CONF_2 0xfffe1078 +#define OMAP7XX_IO_CONF_3 0xfffe107c +#define OMAP7XX_IO_CONF_4 0xfffe1080 +#define OMAP7XX_IO_CONF_5 0xfffe1084 +#define OMAP7XX_IO_CONF_6 0xfffe1088 +#define OMAP7XX_IO_CONF_7 0xfffe108c +#define OMAP7XX_IO_CONF_8 0xfffe1090 +#define OMAP7XX_IO_CONF_9 0xfffe1094 +#define OMAP7XX_IO_CONF_10 0xfffe1098 +#define OMAP7XX_IO_CONF_11 0xfffe109c +#define OMAP7XX_IO_CONF_12 0xfffe10a0 +#define OMAP7XX_IO_CONF_13 0xfffe10a4 + +#define OMAP7XX_MODE_1 0xfffe1010 +#define OMAP7XX_MODE_2 0xfffe1014 + +/* CSMI specials: in terms of base + offset */ +#define OMAP7XX_MODE2_OFFSET 0x14 + +/* + * ---------------------------------------------------------------------------- + * OMAP7XX traffic controller configuration registers + * ---------------------------------------------------------------------------- + */ +#define OMAP7XX_FLASH_CFG_0 0xfffecc10 +#define OMAP7XX_FLASH_ACFG_0 0xfffecc50 +#define OMAP7XX_FLASH_CFG_1 0xfffecc14 +#define OMAP7XX_FLASH_ACFG_1 0xfffecc54 + +/* + * ---------------------------------------------------------------------------- + * OMAP7XX DSP control registers + * ---------------------------------------------------------------------------- + */ +#define OMAP7XX_ICR_BASE 0xfffbb800 +#define OMAP7XX_DSP_M_CTL 0xfffbb804 +#define OMAP7XX_DSP_MMU_BASE 0xfffed200 + +/* + * ---------------------------------------------------------------------------- + * OMAP7XX PCC_UPLD configuration registers + * ---------------------------------------------------------------------------- + */ +#define OMAP7XX_PCC_UPLD_CTRL_BASE (0xfffe0900) +#define OMAP7XX_PCC_UPLD_CTRL (OMAP7XX_PCC_UPLD_CTRL_BASE + 0x00) + +#endif /* __ASM_ARCH_OMAP7XX_H */ + -- cgit v1.2.3-70-g09d2 From b51988db94faec47d6e7c69c8e691cfc194f66db Mon Sep 17 00:00:00 2001 From: Alistair Buxton Date: Tue, 22 Sep 2009 07:34:13 +0100 Subject: OMAP7XX: Update core omap1 files to use omap7xx.h This patch is part of a series which removes references to omap730 in code which is shared with omap850, replacing them with references to omap7xx. Signed-off-by: Alistair Buxton Reviewed-by: Zebediah C. McClure --- arch/arm/mach-omap1/board-fsample.c | 12 ++++++------ arch/arm/mach-omap1/board-perseus2.c | 12 ++++++------ arch/arm/mach-omap1/clock.c | 2 +- arch/arm/mach-omap1/io.c | 12 ++++++------ arch/arm/plat-omap/include/mach/hardware.h | 2 +- arch/arm/plat-omap/include/mach/mux.h | 14 +++++++------- arch/arm/plat-omap/io.c | 12 ++++++------ 7 files changed, 33 insertions(+), 33 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap1/board-fsample.c b/arch/arm/mach-omap1/board-fsample.c index a7ead1b9322..e53f7748ac1 100644 --- a/arch/arm/mach-omap1/board-fsample.c +++ b/arch/arm/mach-omap1/board-fsample.c @@ -309,7 +309,7 @@ static void __init omap_fsample_map_io(void) /* * Hold GSM Reset until needed */ - omap_writew(omap_readw(OMAP730_DSP_M_CTL) & ~1, OMAP730_DSP_M_CTL); + omap_writew(omap_readw(OMAP7XX_DSP_M_CTL) & ~1, OMAP7XX_DSP_M_CTL); /* * UARTs -> done automagically by 8250 driver @@ -320,21 +320,21 @@ static void __init omap_fsample_map_io(void) */ /* Flash: CS0 timings setup */ - omap_writel(0x0000fff3, OMAP730_FLASH_CFG_0); - omap_writel(0x00000088, OMAP730_FLASH_ACFG_0); + omap_writel(0x0000fff3, OMAP7XX_FLASH_CFG_0); + omap_writel(0x00000088, OMAP7XX_FLASH_ACFG_0); /* * Ethernet support through the debug board * CS1 timings setup */ - omap_writel(0x0000fff3, OMAP730_FLASH_CFG_1); - omap_writel(0x00000000, OMAP730_FLASH_ACFG_1); + omap_writel(0x0000fff3, OMAP7XX_FLASH_CFG_1); + omap_writel(0x00000000, OMAP7XX_FLASH_ACFG_1); /* * Configure MPU_EXT_NIRQ IO in IO_CONF9 register, * It is used as the Ethernet controller interrupt */ - omap_writel(omap_readl(OMAP730_IO_CONF_9) & 0x1FFFFFFF, OMAP730_IO_CONF_9); + omap_writel(omap_readl(OMAP7XX_IO_CONF_9) & 0x1FFFFFFF, OMAP7XX_IO_CONF_9); } MACHINE_START(OMAP_FSAMPLE, "OMAP730 F-Sample") diff --git a/arch/arm/mach-omap1/board-perseus2.c b/arch/arm/mach-omap1/board-perseus2.c index 83406699f31..ec22838e8e7 100644 --- a/arch/arm/mach-omap1/board-perseus2.c +++ b/arch/arm/mach-omap1/board-perseus2.c @@ -270,7 +270,7 @@ static void __init omap_perseus2_map_io(void) /* * Hold GSM Reset until needed */ - omap_writew(omap_readw(OMAP730_DSP_M_CTL) & ~1, OMAP730_DSP_M_CTL); + omap_writew(omap_readw(OMAP7XX_DSP_M_CTL) & ~1, OMAP7XX_DSP_M_CTL); /* * UARTs -> done automagically by 8250 driver @@ -281,21 +281,21 @@ static void __init omap_perseus2_map_io(void) */ /* Flash: CS0 timings setup */ - omap_writel(0x0000fff3, OMAP730_FLASH_CFG_0); - omap_writel(0x00000088, OMAP730_FLASH_ACFG_0); + omap_writel(0x0000fff3, OMAP7XX_FLASH_CFG_0); + omap_writel(0x00000088, OMAP7XX_FLASH_ACFG_0); /* * Ethernet support through the debug board * CS1 timings setup */ - omap_writel(0x0000fff3, OMAP730_FLASH_CFG_1); - omap_writel(0x00000000, OMAP730_FLASH_ACFG_1); + omap_writel(0x0000fff3, OMAP7XX_FLASH_CFG_1); + omap_writel(0x00000000, OMAP7XX_FLASH_ACFG_1); /* * Configure MPU_EXT_NIRQ IO in IO_CONF9 register, * It is used as the Ethernet controller interrupt */ - omap_writel(omap_readl(OMAP730_IO_CONF_9) & 0x1FFFFFFF, OMAP730_IO_CONF_9); + omap_writel(omap_readl(OMAP7XX_IO_CONF_9) & 0x1FFFFFFF, OMAP7XX_IO_CONF_9); } MACHINE_START(OMAP_PERSEUS2, "OMAP730 Perseus2") diff --git a/arch/arm/mach-omap1/clock.c b/arch/arm/mach-omap1/clock.c index fcbea61cb8c..c24cc28238f 100644 --- a/arch/arm/mach-omap1/clock.c +++ b/arch/arm/mach-omap1/clock.c @@ -862,7 +862,7 @@ int __init omap1_clk_init(void) #if defined(CONFIG_MACH_OMAP_PERSEUS2) || defined(CONFIG_MACH_OMAP_FSAMPLE) /* Select slicer output as OMAP input clock */ - omap_writew(omap_readw(OMAP730_PCC_UPLD_CTRL) & ~0x1, OMAP730_PCC_UPLD_CTRL); + omap_writew(omap_readw(OMAP7XX_PCC_UPLD_CTRL) & ~0x1, OMAP7XX_PCC_UPLD_CTRL); #endif /* Amstrad Delta wants BCLK high when inactive */ diff --git a/arch/arm/mach-omap1/io.c b/arch/arm/mach-omap1/io.c index 19de57f74e8..157d5082ffe 100644 --- a/arch/arm/mach-omap1/io.c +++ b/arch/arm/mach-omap1/io.c @@ -39,14 +39,14 @@ static struct map_desc omap_io_desc[] __initdata = { #if defined (CONFIG_ARCH_OMAP730) || defined (CONFIG_ARCH_OMAP850) static struct map_desc omap730_io_desc[] __initdata = { { - .virtual = OMAP730_DSP_BASE, - .pfn = __phys_to_pfn(OMAP730_DSP_START), - .length = OMAP730_DSP_SIZE, + .virtual = OMAP7XX_DSP_BASE, + .pfn = __phys_to_pfn(OMAP7XX_DSP_START), + .length = OMAP7XX_DSP_SIZE, .type = MT_DEVICE }, { - .virtual = OMAP730_DSPREG_BASE, - .pfn = __phys_to_pfn(OMAP730_DSPREG_START), - .length = OMAP730_DSPREG_SIZE, + .virtual = OMAP7XX_DSPREG_BASE, + .pfn = __phys_to_pfn(OMAP7XX_DSPREG_START), + .length = OMAP7XX_DSPREG_SIZE, .type = MT_DEVICE } }; diff --git a/arch/arm/plat-omap/include/mach/hardware.h b/arch/arm/plat-omap/include/mach/hardware.h index 26c1fbff08a..99c42412c0a 100644 --- a/arch/arm/plat-omap/include/mach/hardware.h +++ b/arch/arm/plat-omap/include/mach/hardware.h @@ -280,7 +280,7 @@ * --------------------------------------------------------------------------- */ -#include "omap730.h" +#include "omap7xx.h" #include "omap1510.h" #include "omap16xx.h" #include "omap24xx.h" diff --git a/arch/arm/plat-omap/include/mach/mux.h b/arch/arm/plat-omap/include/mach/mux.h index 587fb63d232..66ae302f0c0 100644 --- a/arch/arm/plat-omap/include/mach/mux.h +++ b/arch/arm/plat-omap/include/mach/mux.h @@ -51,13 +51,13 @@ .pu_pd_reg = PU_PD_SEL_##reg, \ .pu_pd_val = status, -#define MUX_REG_730(reg, mode_offset, mode) .mux_reg_name = "OMAP730_IO_CONF_"#reg, \ - .mux_reg = OMAP730_IO_CONF_##reg, \ +#define MUX_REG_730(reg, mode_offset, mode) .mux_reg_name = "OMAP7XX_IO_CONF_"#reg, \ + .mux_reg = OMAP7XX_IO_CONF_##reg, \ .mask_offset = mode_offset, \ .mask = mode, -#define PULL_REG_730(reg, bit, status) .pull_name = "OMAP730_IO_CONF_"#reg, \ - .pull_reg = OMAP730_IO_CONF_##reg, \ +#define PULL_REG_730(reg, bit, status) .pull_name = "OMAP7XX_IO_CONF_"#reg, \ + .pull_reg = OMAP7XX_IO_CONF_##reg, \ .pull_bit = bit, \ .pull_val = status, @@ -75,11 +75,11 @@ .pu_pd_val = status, #define MUX_REG_730(reg, mode_offset, mode) \ - .mux_reg = OMAP730_IO_CONF_##reg, \ + .mux_reg = OMAP7XX_IO_CONF_##reg, \ .mask_offset = mode_offset, \ .mask = mode, -#define PULL_REG_730(reg, bit, status) .pull_reg = OMAP730_IO_CONF_##reg, \ +#define PULL_REG_730(reg, bit, status) .pull_reg = OMAP7XX_IO_CONF_##reg, \ .pull_bit = bit, \ .pull_val = status, @@ -99,7 +99,7 @@ /* * OMAP730/850 has a slightly different config for the pin mux. - * - config regs are the OMAP730_IO_CONF_x regs (see omap730.h) regs and + * - config regs are the OMAP7XX_IO_CONF_x regs (see omap730.h) regs and * not the FUNC_MUX_CTRL_x regs from hardware.h * - for pull-up/down, only has one enable bit which is is in the same register * as mux config diff --git a/arch/arm/plat-omap/io.c b/arch/arm/plat-omap/io.c index 388fd949093..23a205f4a2b 100644 --- a/arch/arm/plat-omap/io.c +++ b/arch/arm/plat-omap/io.c @@ -13,7 +13,7 @@ #include #include -#include +#include #include #include #include @@ -34,12 +34,12 @@ void __iomem *omap_ioremap(unsigned long p, size_t size, unsigned int type) return XLATE(p, OMAP1_IO_PHYS, OMAP1_IO_VIRT); } if (cpu_is_omap7xx()) { - if (BETWEEN(p, OMAP730_DSP_BASE, OMAP730_DSP_SIZE)) - return XLATE(p, OMAP730_DSP_BASE, OMAP730_DSP_START); + if (BETWEEN(p, OMAP7XX_DSP_BASE, OMAP7XX_DSP_SIZE)) + return XLATE(p, OMAP7XX_DSP_BASE, OMAP7XX_DSP_START); - if (BETWEEN(p, OMAP730_DSPREG_BASE, OMAP730_DSPREG_SIZE)) - return XLATE(p, OMAP730_DSPREG_BASE, - OMAP730_DSPREG_START); + if (BETWEEN(p, OMAP7XX_DSPREG_BASE, OMAP7XX_DSPREG_SIZE)) + return XLATE(p, OMAP7XX_DSPREG_BASE, + OMAP7XX_DSPREG_START); } if (cpu_is_omap15xx()) { if (BETWEEN(p, OMAP1510_DSP_BASE, OMAP1510_DSP_SIZE)) -- cgit v1.2.3-70-g09d2 From 372b1c32e7e7d7aa5f44e0eaed4ad8ae21e4e9da Mon Sep 17 00:00:00 2001 From: Alistair Buxton Date: Fri, 18 Sep 2009 04:09:39 +0100 Subject: OMAP7XX: Replace omap730 references in irqs.h and all users This patch is part of a series which removes references to omap730 in code which is shared with omap850, replacing them with references to omap7xx. Turns INT_730_* to INT_7XX_* for definitions in irqs.h and all users. Signed-off-by: Alistair Buxton Reviewed-by: Zebediah C. McClure --- arch/arm/mach-omap1/board-fsample.c | 6 +- arch/arm/mach-omap1/board-perseus2.c | 6 +- arch/arm/mach-omap1/irq.c | 2 +- arch/arm/mach-omap1/mcbsp.c | 8 +- arch/arm/mach-omap1/pm.c | 10 +- arch/arm/mach-omap1/serial.c | 4 +- arch/arm/plat-omap/gpio.c | 14 +-- arch/arm/plat-omap/include/mach/entry-macro.S | 2 +- arch/arm/plat-omap/include/mach/irqs.h | 148 +++++++++++++------------- arch/arm/plat-omap/usb.c | 4 +- 10 files changed, 102 insertions(+), 102 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap1/board-fsample.c b/arch/arm/mach-omap1/board-fsample.c index e53f7748ac1..74720e65f11 100644 --- a/arch/arm/mach-omap1/board-fsample.c +++ b/arch/arm/mach-omap1/board-fsample.c @@ -107,7 +107,7 @@ static struct resource smc91x_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = INT_730_MPU_EXT_NIRQ, + .start = INT_7XX_MPU_EXT_NIRQ, .end = 0, .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE, }, @@ -196,8 +196,8 @@ static struct platform_device smc91x_device = { static struct resource kp_resources[] = { [0] = { - .start = INT_730_MPUIO_KEYPAD, - .end = INT_730_MPUIO_KEYPAD, + .start = INT_7XX_MPUIO_KEYPAD, + .end = INT_7XX_MPUIO_KEYPAD, .flags = IORESOURCE_IRQ, }, }; diff --git a/arch/arm/mach-omap1/board-perseus2.c b/arch/arm/mach-omap1/board-perseus2.c index ec22838e8e7..2f897cf2350 100644 --- a/arch/arm/mach-omap1/board-perseus2.c +++ b/arch/arm/mach-omap1/board-perseus2.c @@ -74,7 +74,7 @@ static struct resource smc91x_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = INT_730_MPU_EXT_NIRQ, + .start = INT_7XX_MPU_EXT_NIRQ, .end = 0, .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE, }, @@ -163,8 +163,8 @@ static struct platform_device smc91x_device = { static struct resource kp_resources[] = { [0] = { - .start = INT_730_MPUIO_KEYPAD, - .end = INT_730_MPUIO_KEYPAD, + .start = INT_7XX_MPUIO_KEYPAD, + .end = INT_7XX_MPUIO_KEYPAD, .flags = IORESOURCE_IRQ, }, }; diff --git a/arch/arm/mach-omap1/irq.c b/arch/arm/mach-omap1/irq.c index c05999c4116..704a80c2972 100644 --- a/arch/arm/mach-omap1/irq.c +++ b/arch/arm/mach-omap1/irq.c @@ -234,7 +234,7 @@ void __init omap_init_irq(void) /* Unmask level 2 handler */ if (cpu_is_omap7xx()) - omap_unmask_irq(INT_730_IH2_IRQ); + omap_unmask_irq(INT_7XX_IH2_IRQ); else if (cpu_is_omap15xx()) omap_unmask_irq(INT_1510_IH2_IRQ); else if (cpu_is_omap16xx()) diff --git a/arch/arm/mach-omap1/mcbsp.c b/arch/arm/mach-omap1/mcbsp.c index 06f380bf221..7ccca0069dc 100644 --- a/arch/arm/mach-omap1/mcbsp.c +++ b/arch/arm/mach-omap1/mcbsp.c @@ -85,16 +85,16 @@ static struct omap_mcbsp_platform_data omap730_mcbsp_pdata[] = { .phys_base = OMAP730_MCBSP1_BASE, .dma_rx_sync = OMAP_DMA_MCBSP1_RX, .dma_tx_sync = OMAP_DMA_MCBSP1_TX, - .rx_irq = INT_730_McBSP1RX, - .tx_irq = INT_730_McBSP1TX, + .rx_irq = INT_7XX_McBSP1RX, + .tx_irq = INT_7XX_McBSP1TX, .ops = &omap1_mcbsp_ops, }, { .phys_base = OMAP730_MCBSP2_BASE, .dma_rx_sync = OMAP_DMA_MCBSP3_RX, .dma_tx_sync = OMAP_DMA_MCBSP3_TX, - .rx_irq = INT_730_McBSP2RX, - .tx_irq = INT_730_McBSP2TX, + .rx_irq = INT_7XX_McBSP2RX, + .tx_irq = INT_7XX_McBSP2TX, .ops = &omap1_mcbsp_ops, }, }; diff --git a/arch/arm/mach-omap1/pm.c b/arch/arm/mach-omap1/pm.c index 12f246e3cdc..58479c75cac 100644 --- a/arch/arm/mach-omap1/pm.c +++ b/arch/arm/mach-omap1/pm.c @@ -184,8 +184,8 @@ static void omap_pm_wakeup_setup(void) * wake up to a GPIO interrupt. */ if (cpu_is_omap7xx()) - level1_wake = OMAP_IRQ_BIT(INT_730_GPIO_BANK1) | - OMAP_IRQ_BIT(INT_730_IH2_IRQ); + level1_wake = OMAP_IRQ_BIT(INT_7XX_GPIO_BANK1) | + OMAP_IRQ_BIT(INT_7XX_IH2_IRQ); else if (cpu_is_omap15xx()) level1_wake = OMAP_IRQ_BIT(INT_GPIO_BANK1) | OMAP_IRQ_BIT(INT_1510_IH2_IRQ); @@ -197,8 +197,8 @@ static void omap_pm_wakeup_setup(void) if (cpu_is_omap7xx()) { omap_writel(~level2_wake, OMAP_IH2_0_MIR); - omap_writel(~(OMAP_IRQ_BIT(INT_730_WAKE_UP_REQ) | - OMAP_IRQ_BIT(INT_730_MPUIO_KEYPAD)), + omap_writel(~(OMAP_IRQ_BIT(INT_7XX_WAKE_UP_REQ) | + OMAP_IRQ_BIT(INT_7XX_MPUIO_KEYPAD)), OMAP_IH2_1_MIR); } else if (cpu_is_omap15xx()) { level2_wake |= OMAP_IRQ_BIT(INT_KEYBOARD); @@ -687,7 +687,7 @@ static int __init omap_pm_init(void) pm_idle = omap1_pm_idle; if (cpu_is_omap7xx()) - setup_irq(INT_730_WAKE_UP_REQ, &omap_wakeup_irq); + setup_irq(INT_7XX_WAKE_UP_REQ, &omap_wakeup_irq); else if (cpu_is_omap16xx()) setup_irq(INT_1610_WAKE_UP_REQ, &omap_wakeup_irq); diff --git a/arch/arm/mach-omap1/serial.c b/arch/arm/mach-omap1/serial.c index 49381e271be..ed07af109f0 100644 --- a/arch/arm/mach-omap1/serial.c +++ b/arch/arm/mach-omap1/serial.c @@ -113,8 +113,8 @@ void __init omap_serial_init(void) if (cpu_is_omap7xx()) { serial_platform_data[0].regshift = 0; serial_platform_data[1].regshift = 0; - serial_platform_data[0].irq = INT_730_UART_MODEM_1; - serial_platform_data[1].irq = INT_730_UART_MODEM_IRDA_2; + serial_platform_data[0].irq = INT_7XX_UART_MODEM_1; + serial_platform_data[1].irq = INT_7XX_UART_MODEM_IRDA_2; } if (cpu_is_omap15xx()) { diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c index 665ca050183..22f6e689f5c 100644 --- a/arch/arm/plat-omap/gpio.c +++ b/arch/arm/plat-omap/gpio.c @@ -221,13 +221,13 @@ static struct gpio_bank gpio_bank_1510[2] = { #if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) static struct gpio_bank gpio_bank_730[7] = { - { OMAP1_MPUIO_VBASE, INT_730_MPUIO, IH_MPUIO_BASE, METHOD_MPUIO }, - { OMAP730_GPIO1_BASE, INT_730_GPIO_BANK1, IH_GPIO_BASE, METHOD_GPIO_730 }, - { OMAP730_GPIO2_BASE, INT_730_GPIO_BANK2, IH_GPIO_BASE + 32, METHOD_GPIO_730 }, - { OMAP730_GPIO3_BASE, INT_730_GPIO_BANK3, IH_GPIO_BASE + 64, METHOD_GPIO_730 }, - { OMAP730_GPIO4_BASE, INT_730_GPIO_BANK4, IH_GPIO_BASE + 96, METHOD_GPIO_730 }, - { OMAP730_GPIO5_BASE, INT_730_GPIO_BANK5, IH_GPIO_BASE + 128, METHOD_GPIO_730 }, - { OMAP730_GPIO6_BASE, INT_730_GPIO_BANK6, IH_GPIO_BASE + 160, METHOD_GPIO_730 }, + { OMAP1_MPUIO_VBASE, INT_7XX_MPUIO, IH_MPUIO_BASE, METHOD_MPUIO }, + { OMAP730_GPIO1_BASE, INT_7XX_GPIO_BANK1, IH_GPIO_BASE, METHOD_GPIO_730 }, + { OMAP730_GPIO2_BASE, INT_7XX_GPIO_BANK2, IH_GPIO_BASE + 32, METHOD_GPIO_730 }, + { OMAP730_GPIO3_BASE, INT_7XX_GPIO_BANK3, IH_GPIO_BASE + 64, METHOD_GPIO_730 }, + { OMAP730_GPIO4_BASE, INT_7XX_GPIO_BANK4, IH_GPIO_BASE + 96, METHOD_GPIO_730 }, + { OMAP730_GPIO5_BASE, INT_7XX_GPIO_BANK5, IH_GPIO_BASE + 128, METHOD_GPIO_730 }, + { OMAP730_GPIO6_BASE, INT_7XX_GPIO_BANK6, IH_GPIO_BASE + 160, METHOD_GPIO_730 }, }; #endif diff --git a/arch/arm/plat-omap/include/mach/entry-macro.S b/arch/arm/plat-omap/include/mach/entry-macro.S index bcf71585665..abe086416e1 100644 --- a/arch/arm/plat-omap/include/mach/entry-macro.S +++ b/arch/arm/plat-omap/include/mach/entry-macro.S @@ -21,7 +21,7 @@ (defined(CONFIG_ARCH_OMAP15XX) || defined(CONFIG_ARCH_OMAP16XX)) #error "FIXME: OMAP7XX doesn't support multiple-OMAP" #elif defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) -#define INT_IH2_IRQ INT_730_IH2_IRQ +#define INT_IH2_IRQ INT_7XX_IH2_IRQ #elif defined(CONFIG_ARCH_OMAP15XX) #define INT_IH2_IRQ INT_1510_IH2_IRQ #elif defined(CONFIG_ARCH_OMAP16XX) diff --git a/arch/arm/plat-omap/include/mach/irqs.h b/arch/arm/plat-omap/include/mach/irqs.h index 7f338f0c745..6a6d0281e1d 100644 --- a/arch/arm/plat-omap/include/mach/irqs.h +++ b/arch/arm/plat-omap/include/mach/irqs.h @@ -86,26 +86,26 @@ #define INT_1610_SSR_FIFO_0 29 /* - * OMAP-730 specific IRQ numbers for interrupt handler 1 + * OMAP-7xx specific IRQ numbers for interrupt handler 1 */ -#define INT_730_IH2_FIQ 0 -#define INT_730_IH2_IRQ 1 -#define INT_730_USB_NON_ISO 2 -#define INT_730_USB_ISO 3 -#define INT_730_ICR 4 -#define INT_730_EAC 5 -#define INT_730_GPIO_BANK1 6 -#define INT_730_GPIO_BANK2 7 -#define INT_730_GPIO_BANK3 8 -#define INT_730_McBSP2TX 10 -#define INT_730_McBSP2RX 11 -#define INT_730_McBSP2RX_OVF 12 -#define INT_730_LCD_LINE 14 -#define INT_730_GSM_PROTECT 15 -#define INT_730_TIMER3 16 -#define INT_730_GPIO_BANK5 17 -#define INT_730_GPIO_BANK6 18 -#define INT_730_SPGIO_WR 29 +#define INT_7XX_IH2_FIQ 0 +#define INT_7XX_IH2_IRQ 1 +#define INT_7XX_USB_NON_ISO 2 +#define INT_7XX_USB_ISO 3 +#define INT_7XX_ICR 4 +#define INT_7XX_EAC 5 +#define INT_7XX_GPIO_BANK1 6 +#define INT_7XX_GPIO_BANK2 7 +#define INT_7XX_GPIO_BANK3 8 +#define INT_7XX_McBSP2TX 10 +#define INT_7XX_McBSP2RX 11 +#define INT_7XX_McBSP2RX_OVF 12 +#define INT_7XX_LCD_LINE 14 +#define INT_7XX_GSM_PROTECT 15 +#define INT_7XX_TIMER3 16 +#define INT_7XX_GPIO_BANK5 17 +#define INT_7XX_GPIO_BANK6 18 +#define INT_7XX_SPGIO_WR 29 /* * IRQ numbers for interrupt handler 2 @@ -183,62 +183,62 @@ #define INT_1610_SHA1MD5 (91 + IH2_BASE) /* - * OMAP-730 specific IRQ numbers for interrupt handler 2 + * OMAP-7xx specific IRQ numbers for interrupt handler 2 */ -#define INT_730_HW_ERRORS (0 + IH2_BASE) -#define INT_730_NFIQ_PWR_FAIL (1 + IH2_BASE) -#define INT_730_CFCD (2 + IH2_BASE) -#define INT_730_CFIREQ (3 + IH2_BASE) -#define INT_730_I2C (4 + IH2_BASE) -#define INT_730_PCC (5 + IH2_BASE) -#define INT_730_MPU_EXT_NIRQ (6 + IH2_BASE) -#define INT_730_SPI_100K_1 (7 + IH2_BASE) -#define INT_730_SYREN_SPI (8 + IH2_BASE) -#define INT_730_VLYNQ (9 + IH2_BASE) -#define INT_730_GPIO_BANK4 (10 + IH2_BASE) -#define INT_730_McBSP1TX (11 + IH2_BASE) -#define INT_730_McBSP1RX (12 + IH2_BASE) -#define INT_730_McBSP1RX_OF (13 + IH2_BASE) -#define INT_730_UART_MODEM_IRDA_2 (14 + IH2_BASE) -#define INT_730_UART_MODEM_1 (15 + IH2_BASE) -#define INT_730_MCSI (16 + IH2_BASE) -#define INT_730_uWireTX (17 + IH2_BASE) -#define INT_730_uWireRX (18 + IH2_BASE) -#define INT_730_SMC_CD (19 + IH2_BASE) -#define INT_730_SMC_IREQ (20 + IH2_BASE) -#define INT_730_HDQ_1WIRE (21 + IH2_BASE) -#define INT_730_TIMER32K (22 + IH2_BASE) -#define INT_730_MMC_SDIO (23 + IH2_BASE) -#define INT_730_UPLD (24 + IH2_BASE) -#define INT_730_USB_HHC_1 (27 + IH2_BASE) -#define INT_730_USB_HHC_2 (28 + IH2_BASE) -#define INT_730_USB_GENI (29 + IH2_BASE) -#define INT_730_USB_OTG (30 + IH2_BASE) -#define INT_730_CAMERA_IF (31 + IH2_BASE) -#define INT_730_RNG (32 + IH2_BASE) -#define INT_730_DUAL_MODE_TIMER (33 + IH2_BASE) -#define INT_730_DBB_RF_EN (34 + IH2_BASE) -#define INT_730_MPUIO_KEYPAD (35 + IH2_BASE) -#define INT_730_SHA1_MD5 (36 + IH2_BASE) -#define INT_730_SPI_100K_2 (37 + IH2_BASE) -#define INT_730_RNG_IDLE (38 + IH2_BASE) -#define INT_730_MPUIO (39 + IH2_BASE) -#define INT_730_LLPC_LCD_CTRL_CAN_BE_OFF (40 + IH2_BASE) -#define INT_730_LLPC_OE_FALLING (41 + IH2_BASE) -#define INT_730_LLPC_OE_RISING (42 + IH2_BASE) -#define INT_730_LLPC_VSYNC (43 + IH2_BASE) -#define INT_730_WAKE_UP_REQ (46 + IH2_BASE) -#define INT_730_DMA_CH6 (53 + IH2_BASE) -#define INT_730_DMA_CH7 (54 + IH2_BASE) -#define INT_730_DMA_CH8 (55 + IH2_BASE) -#define INT_730_DMA_CH9 (56 + IH2_BASE) -#define INT_730_DMA_CH10 (57 + IH2_BASE) -#define INT_730_DMA_CH11 (58 + IH2_BASE) -#define INT_730_DMA_CH12 (59 + IH2_BASE) -#define INT_730_DMA_CH13 (60 + IH2_BASE) -#define INT_730_DMA_CH14 (61 + IH2_BASE) -#define INT_730_DMA_CH15 (62 + IH2_BASE) -#define INT_730_NAND (63 + IH2_BASE) +#define INT_7XX_HW_ERRORS (0 + IH2_BASE) +#define INT_7XX_NFIQ_PWR_FAIL (1 + IH2_BASE) +#define INT_7XX_CFCD (2 + IH2_BASE) +#define INT_7XX_CFIREQ (3 + IH2_BASE) +#define INT_7XX_I2C (4 + IH2_BASE) +#define INT_7XX_PCC (5 + IH2_BASE) +#define INT_7XX_MPU_EXT_NIRQ (6 + IH2_BASE) +#define INT_7XX_SPI_100K_1 (7 + IH2_BASE) +#define INT_7XX_SYREN_SPI (8 + IH2_BASE) +#define INT_7XX_VLYNQ (9 + IH2_BASE) +#define INT_7XX_GPIO_BANK4 (10 + IH2_BASE) +#define INT_7XX_McBSP1TX (11 + IH2_BASE) +#define INT_7XX_McBSP1RX (12 + IH2_BASE) +#define INT_7XX_McBSP1RX_OF (13 + IH2_BASE) +#define INT_7XX_UART_MODEM_IRDA_2 (14 + IH2_BASE) +#define INT_7XX_UART_MODEM_1 (15 + IH2_BASE) +#define INT_7XX_MCSI (16 + IH2_BASE) +#define INT_7XX_uWireTX (17 + IH2_BASE) +#define INT_7XX_uWireRX (18 + IH2_BASE) +#define INT_7XX_SMC_CD (19 + IH2_BASE) +#define INT_7XX_SMC_IREQ (20 + IH2_BASE) +#define INT_7XX_HDQ_1WIRE (21 + IH2_BASE) +#define INT_7XX_TIMER32K (22 + IH2_BASE) +#define INT_7XX_MMC_SDIO (23 + IH2_BASE) +#define INT_7XX_UPLD (24 + IH2_BASE) +#define INT_7XX_USB_HHC_1 (27 + IH2_BASE) +#define INT_7XX_USB_HHC_2 (28 + IH2_BASE) +#define INT_7XX_USB_GENI (29 + IH2_BASE) +#define INT_7XX_USB_OTG (30 + IH2_BASE) +#define INT_7XX_CAMERA_IF (31 + IH2_BASE) +#define INT_7XX_RNG (32 + IH2_BASE) +#define INT_7XX_DUAL_MODE_TIMER (33 + IH2_BASE) +#define INT_7XX_DBB_RF_EN (34 + IH2_BASE) +#define INT_7XX_MPUIO_KEYPAD (35 + IH2_BASE) +#define INT_7XX_SHA1_MD5 (36 + IH2_BASE) +#define INT_7XX_SPI_100K_2 (37 + IH2_BASE) +#define INT_7XX_RNG_IDLE (38 + IH2_BASE) +#define INT_7XX_MPUIO (39 + IH2_BASE) +#define INT_7XX_LLPC_LCD_CTRL_CAN_BE_OFF (40 + IH2_BASE) +#define INT_7XX_LLPC_OE_FALLING (41 + IH2_BASE) +#define INT_7XX_LLPC_OE_RISING (42 + IH2_BASE) +#define INT_7XX_LLPC_VSYNC (43 + IH2_BASE) +#define INT_7XX_WAKE_UP_REQ (46 + IH2_BASE) +#define INT_7XX_DMA_CH6 (53 + IH2_BASE) +#define INT_7XX_DMA_CH7 (54 + IH2_BASE) +#define INT_7XX_DMA_CH8 (55 + IH2_BASE) +#define INT_7XX_DMA_CH9 (56 + IH2_BASE) +#define INT_7XX_DMA_CH10 (57 + IH2_BASE) +#define INT_7XX_DMA_CH11 (58 + IH2_BASE) +#define INT_7XX_DMA_CH12 (59 + IH2_BASE) +#define INT_7XX_DMA_CH13 (60 + IH2_BASE) +#define INT_7XX_DMA_CH14 (61 + IH2_BASE) +#define INT_7XX_DMA_CH15 (62 + IH2_BASE) +#define INT_7XX_NAND (63 + IH2_BASE) #define INT_24XX_SYS_NIRQ 7 #define INT_24XX_SDMA_IRQ0 12 diff --git a/arch/arm/plat-omap/usb.c b/arch/arm/plat-omap/usb.c index 980d2eb68a2..3c40b8525df 100644 --- a/arch/arm/plat-omap/usb.c +++ b/arch/arm/plat-omap/usb.c @@ -615,7 +615,7 @@ omap_otg_init(struct omap_usb_config *config) syscon &= ~HST_IDLE_EN; ohci_device.dev.platform_data = config; if (cpu_is_omap7xx()) - ohci_resources[1].start = INT_730_USB_HHC_1; + ohci_resources[1].start = INT_7XX_USB_HHC_1; status = platform_device_register(&ohci_device); if (status) pr_debug("can't register OHCI device, %d\n", status); @@ -627,7 +627,7 @@ omap_otg_init(struct omap_usb_config *config) syscon &= ~OTG_IDLE_EN; otg_device.dev.platform_data = config; if (cpu_is_omap7xx()) - otg_resources[1].start = INT_730_USB_OTG; + otg_resources[1].start = INT_7XX_USB_OTG; status = platform_device_register(&otg_device); if (status) pr_debug("can't register OTG device, %d\n", status); -- cgit v1.2.3-70-g09d2 From 7c0069264017fdac8ef017b8893f0f0d7a13851a Mon Sep 17 00:00:00 2001 From: Alistair Buxton Date: Tue, 22 Sep 2009 10:02:58 +0100 Subject: OMAP7XX: Rename all the rest of the omap730 references in omap1 core This patch is part of a series which removes references to omap730 in code which is shared with omap850, replacing them with references to omap7xx. This updates all the remaining omap730 references in miscellaneous local variables, macros and similar. Signed-off-by: Alistair Buxton Reviewed-by: Zebediah C. McClure --- arch/arm/mach-omap1/clock.c | 8 +-- arch/arm/mach-omap1/io.c | 4 +- arch/arm/mach-omap1/irq.c | 6 +-- arch/arm/mach-omap1/mcbsp.c | 18 +++---- arch/arm/mach-omap1/mux.c | 42 +++++++-------- arch/arm/mach-omap1/pm.c | 70 ++++++++++++------------- arch/arm/mach-omap1/pm.h | 52 +++++++++---------- arch/arm/mach-omap1/sleep.S | 22 ++++---- arch/arm/plat-omap/devices.c | 22 ++++---- arch/arm/plat-omap/gpio.c | 92 ++++++++++++++++----------------- arch/arm/plat-omap/include/mach/mcbsp.h | 4 +- arch/arm/plat-omap/include/mach/mux.h | 42 +++++++-------- 12 files changed, 191 insertions(+), 191 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap1/clock.c b/arch/arm/mach-omap1/clock.c index c24cc28238f..d2b00a56393 100644 --- a/arch/arm/mach-omap1/clock.c +++ b/arch/arm/mach-omap1/clock.c @@ -69,7 +69,7 @@ struct omap_clk { } #define CK_310 (1 << 0) -#define CK_730 (1 << 1) +#define CK_7XX (1 << 1) #define CK_1510 (1 << 2) #define CK_16XX (1 << 3) @@ -97,7 +97,7 @@ static struct omap_clk omap_clks[] = { CLK(NULL, "dspxor_ck", &dspxor_ck, CK_16XX | CK_1510 | CK_310), CLK(NULL, "dsptim_ck", &dsptim_ck, CK_16XX | CK_1510 | CK_310), /* CK_GEN3 clocks */ - CLK(NULL, "tc_ck", &tc_ck.clk, CK_16XX | CK_1510 | CK_310 | CK_730), + CLK(NULL, "tc_ck", &tc_ck.clk, CK_16XX | CK_1510 | CK_310 | CK_7XX), CLK(NULL, "tipb_ck", &tipb_ck, CK_1510 | CK_310), CLK(NULL, "l3_ocpi_ck", &l3_ocpi_ck, CK_16XX), CLK(NULL, "tc1_ck", &tc1_ck, CK_16XX), @@ -108,7 +108,7 @@ static struct omap_clk omap_clks[] = { CLK(NULL, "lb_ck", &lb_ck.clk, CK_1510 | CK_310), CLK(NULL, "rhea1_ck", &rhea1_ck, CK_16XX), CLK(NULL, "rhea2_ck", &rhea2_ck, CK_16XX), - CLK(NULL, "lcd_ck", &lcd_ck_16xx, CK_16XX | CK_730), + CLK(NULL, "lcd_ck", &lcd_ck_16xx, CK_16XX | CK_7XX), CLK(NULL, "lcd_ck", &lcd_ck_1510.clk, CK_1510 | CK_310), /* ULPD clocks */ CLK(NULL, "uart1_ck", &uart1_1510, CK_1510 | CK_310), @@ -784,7 +784,7 @@ int __init omap1_clk_init(void) if (cpu_is_omap1510()) cpu_mask |= CK_1510; if (cpu_is_omap7xx()) - cpu_mask |= CK_730; + cpu_mask |= CK_7XX; if (cpu_is_omap310()) cpu_mask |= CK_310; diff --git a/arch/arm/mach-omap1/io.c b/arch/arm/mach-omap1/io.c index 157d5082ffe..a27df2c14ac 100644 --- a/arch/arm/mach-omap1/io.c +++ b/arch/arm/mach-omap1/io.c @@ -37,7 +37,7 @@ static struct map_desc omap_io_desc[] __initdata = { }; #if defined (CONFIG_ARCH_OMAP730) || defined (CONFIG_ARCH_OMAP850) -static struct map_desc omap730_io_desc[] __initdata = { +static struct map_desc omap7xx_io_desc[] __initdata = { { .virtual = OMAP7XX_DSP_BASE, .pfn = __phys_to_pfn(OMAP7XX_DSP_START), @@ -106,7 +106,7 @@ void __init omap1_map_common_io(void) #if defined (CONFIG_ARCH_OMAP730) || defined (CONFIG_ARCH_OMAP850) if (cpu_is_omap7xx()) { - iotable_init(omap730_io_desc, ARRAY_SIZE(omap730_io_desc)); + iotable_init(omap7xx_io_desc, ARRAY_SIZE(omap7xx_io_desc)); } #endif #ifdef CONFIG_ARCH_OMAP15XX diff --git a/arch/arm/mach-omap1/irq.c b/arch/arm/mach-omap1/irq.c index 704a80c2972..8f98b58575d 100644 --- a/arch/arm/mach-omap1/irq.c +++ b/arch/arm/mach-omap1/irq.c @@ -138,7 +138,7 @@ static void omap_irq_set_cfg(int irq, int fiq, int priority, int trigger) } #if defined (CONFIG_ARCH_OMAP730) || defined (CONFIG_ARCH_OMAP850) -static struct omap_irq_bank omap730_irq_banks[] = { +static struct omap_irq_bank omap7xx_irq_banks[] = { { .base_reg = OMAP_IH1_BASE, .trigger_map = 0xb3f8e22f }, { .base_reg = OMAP_IH2_BASE, .trigger_map = 0xfdb9c1f2 }, { .base_reg = OMAP_IH2_BASE + 0x100, .trigger_map = 0x800040f3 }, @@ -180,8 +180,8 @@ void __init omap_init_irq(void) #if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) if (cpu_is_omap7xx()) { - irq_banks = omap730_irq_banks; - irq_bank_count = ARRAY_SIZE(omap730_irq_banks); + irq_banks = omap7xx_irq_banks; + irq_bank_count = ARRAY_SIZE(omap7xx_irq_banks); } #endif #ifdef CONFIG_ARCH_OMAP15XX diff --git a/arch/arm/mach-omap1/mcbsp.c b/arch/arm/mach-omap1/mcbsp.c index 7ccca0069dc..3a51cb210de 100644 --- a/arch/arm/mach-omap1/mcbsp.c +++ b/arch/arm/mach-omap1/mcbsp.c @@ -80,9 +80,9 @@ static struct omap_mcbsp_ops omap1_mcbsp_ops = { }; #if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) -static struct omap_mcbsp_platform_data omap730_mcbsp_pdata[] = { +static struct omap_mcbsp_platform_data omap7xx_mcbsp_pdata[] = { { - .phys_base = OMAP730_MCBSP1_BASE, + .phys_base = OMAP7XX_MCBSP1_BASE, .dma_rx_sync = OMAP_DMA_MCBSP1_RX, .dma_tx_sync = OMAP_DMA_MCBSP1_TX, .rx_irq = INT_7XX_McBSP1RX, @@ -90,7 +90,7 @@ static struct omap_mcbsp_platform_data omap730_mcbsp_pdata[] = { .ops = &omap1_mcbsp_ops, }, { - .phys_base = OMAP730_MCBSP2_BASE, + .phys_base = OMAP7XX_MCBSP2_BASE, .dma_rx_sync = OMAP_DMA_MCBSP3_RX, .dma_tx_sync = OMAP_DMA_MCBSP3_TX, .rx_irq = INT_7XX_McBSP2RX, @@ -98,10 +98,10 @@ static struct omap_mcbsp_platform_data omap730_mcbsp_pdata[] = { .ops = &omap1_mcbsp_ops, }, }; -#define OMAP730_MCBSP_PDATA_SZ ARRAY_SIZE(omap730_mcbsp_pdata) +#define OMAP7XX_MCBSP_PDATA_SZ ARRAY_SIZE(omap7xx_mcbsp_pdata) #else -#define omap730_mcbsp_pdata NULL -#define OMAP730_MCBSP_PDATA_SZ 0 +#define omap7xx_mcbsp_pdata NULL +#define OMAP7XX_MCBSP_PDATA_SZ 0 #endif #ifdef CONFIG_ARCH_OMAP15XX @@ -173,7 +173,7 @@ static struct omap_mcbsp_platform_data omap16xx_mcbsp_pdata[] = { int __init omap1_mcbsp_init(void) { if (cpu_is_omap7xx()) - omap_mcbsp_count = OMAP730_MCBSP_PDATA_SZ; + omap_mcbsp_count = OMAP7XX_MCBSP_PDATA_SZ; if (cpu_is_omap15xx()) omap_mcbsp_count = OMAP15XX_MCBSP_PDATA_SZ; if (cpu_is_omap16xx()) @@ -185,8 +185,8 @@ int __init omap1_mcbsp_init(void) return -ENOMEM; if (cpu_is_omap7xx()) - omap_mcbsp_register_board_cfg(omap730_mcbsp_pdata, - OMAP730_MCBSP_PDATA_SZ); + omap_mcbsp_register_board_cfg(omap7xx_mcbsp_pdata, + OMAP7XX_MCBSP_PDATA_SZ); if (cpu_is_omap15xx()) omap_mcbsp_register_board_cfg(omap15xx_mcbsp_pdata, diff --git a/arch/arm/mach-omap1/mux.c b/arch/arm/mach-omap1/mux.c index f9d45a3bf4f..d59899d6a7f 100644 --- a/arch/arm/mach-omap1/mux.c +++ b/arch/arm/mach-omap1/mux.c @@ -36,27 +36,27 @@ static struct omap_mux_cfg arch_mux_cfg; #if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) -static struct pin_config __initdata_or_module omap730_pins[] = { -MUX_CFG_730("E2_730_KBR0", 12, 21, 0, 20, 1, 0) -MUX_CFG_730("J7_730_KBR1", 12, 25, 0, 24, 1, 0) -MUX_CFG_730("E1_730_KBR2", 12, 29, 0, 28, 1, 0) -MUX_CFG_730("F3_730_KBR3", 13, 1, 0, 0, 1, 0) -MUX_CFG_730("D2_730_KBR4", 13, 5, 0, 4, 1, 0) -MUX_CFG_730("C2_730_KBC0", 13, 9, 0, 8, 1, 0) -MUX_CFG_730("D3_730_KBC1", 13, 13, 0, 12, 1, 0) -MUX_CFG_730("E4_730_KBC2", 13, 17, 0, 16, 1, 0) -MUX_CFG_730("F4_730_KBC3", 13, 21, 0, 20, 1, 0) -MUX_CFG_730("E3_730_KBC4", 13, 25, 0, 24, 1, 0) - -MUX_CFG_730("AA17_730_USB_DM", 2, 21, 0, 20, 0, 0) -MUX_CFG_730("W16_730_USB_PU_EN", 2, 25, 0, 24, 0, 0) -MUX_CFG_730("W17_730_USB_VBUSI", 2, 29, 0, 28, 0, 0) +static struct pin_config __initdata_or_module omap7xx_pins[] = { +MUX_CFG_7XX("E2_7XX_KBR0", 12, 21, 0, 20, 1, 0) +MUX_CFG_7XX("J7_7XX_KBR1", 12, 25, 0, 24, 1, 0) +MUX_CFG_7XX("E1_7XX_KBR2", 12, 29, 0, 28, 1, 0) +MUX_CFG_7XX("F3_7XX_KBR3", 13, 1, 0, 0, 1, 0) +MUX_CFG_7XX("D2_7XX_KBR4", 13, 5, 0, 4, 1, 0) +MUX_CFG_7XX("C2_7XX_KBC0", 13, 9, 0, 8, 1, 0) +MUX_CFG_7XX("D3_7XX_KBC1", 13, 13, 0, 12, 1, 0) +MUX_CFG_7XX("E4_7XX_KBC2", 13, 17, 0, 16, 1, 0) +MUX_CFG_7XX("F4_7XX_KBC3", 13, 21, 0, 20, 1, 0) +MUX_CFG_7XX("E3_7XX_KBC4", 13, 25, 0, 24, 1, 0) + +MUX_CFG_7XX("AA17_7XX_USB_DM", 2, 21, 0, 20, 0, 0) +MUX_CFG_7XX("W16_7XX_USB_PU_EN", 2, 25, 0, 24, 0, 0) +MUX_CFG_7XX("W17_7XX_USB_VBUSI", 2, 29, 0, 28, 0, 0) }; -#define OMAP730_PINS_SZ ARRAY_SIZE(omap730_pins) +#define OMAP7XX_PINS_SZ ARRAY_SIZE(omap7xx_pins) #else -#define omap730_pins NULL -#define OMAP730_PINS_SZ 0 -#endif /* CONFIG_ARCH_OMAP730 */ +#define omap7xx_pins NULL +#define OMAP7XX_PINS_SZ 0 +#endif /* CONFIG_ARCH_OMAP730 || CONFIG_ARCH_OMAP850 */ #if defined(CONFIG_ARCH_OMAP15XX) || defined(CONFIG_ARCH_OMAP16XX) static struct pin_config __initdata_or_module omap1xxx_pins[] = { @@ -431,8 +431,8 @@ int __init_or_module omap1_cfg_reg(const struct pin_config *cfg) int __init omap1_mux_init(void) { if (cpu_is_omap7xx()) { - arch_mux_cfg.pins = omap730_pins; - arch_mux_cfg.size = OMAP730_PINS_SZ; + arch_mux_cfg.pins = omap7xx_pins; + arch_mux_cfg.size = OMAP7XX_PINS_SZ; arch_mux_cfg.cfg_reg = omap1_cfg_reg; } diff --git a/arch/arm/mach-omap1/pm.c b/arch/arm/mach-omap1/pm.c index 58479c75cac..10f4e4adca1 100644 --- a/arch/arm/mach-omap1/pm.c +++ b/arch/arm/mach-omap1/pm.c @@ -62,7 +62,7 @@ static unsigned int arm_sleep_save[ARM_SLEEP_SAVE_SIZE]; static unsigned short dsp_sleep_save[DSP_SLEEP_SAVE_SIZE]; static unsigned short ulpd_sleep_save[ULPD_SLEEP_SAVE_SIZE]; -static unsigned int mpui730_sleep_save[MPUI730_SLEEP_SAVE_SIZE]; +static unsigned int mpui7xx_sleep_save[MPUI7XX_SLEEP_SAVE_SIZE]; static unsigned int mpui1510_sleep_save[MPUI1510_SLEEP_SAVE_SIZE]; static unsigned int mpui1610_sleep_save[MPUI1610_SLEEP_SAVE_SIZE]; @@ -254,14 +254,14 @@ void omap1_pm_suspend(void) */ if (cpu_is_omap7xx()) { - MPUI730_SAVE(OMAP_IH1_MIR); - MPUI730_SAVE(OMAP_IH2_0_MIR); - MPUI730_SAVE(OMAP_IH2_1_MIR); - MPUI730_SAVE(MPUI_CTRL); - MPUI730_SAVE(MPUI_DSP_BOOT_CONFIG); - MPUI730_SAVE(MPUI_DSP_API_CONFIG); - MPUI730_SAVE(EMIFS_CONFIG); - MPUI730_SAVE(EMIFF_SDRAM_CONFIG); + MPUI7XX_SAVE(OMAP_IH1_MIR); + MPUI7XX_SAVE(OMAP_IH2_0_MIR); + MPUI7XX_SAVE(OMAP_IH2_1_MIR); + MPUI7XX_SAVE(MPUI_CTRL); + MPUI7XX_SAVE(MPUI_DSP_BOOT_CONFIG); + MPUI7XX_SAVE(MPUI_DSP_API_CONFIG); + MPUI7XX_SAVE(EMIFS_CONFIG); + MPUI7XX_SAVE(EMIFF_SDRAM_CONFIG); } else if (cpu_is_omap15xx()) { MPUI1510_SAVE(OMAP_IH1_MIR); @@ -384,11 +384,11 @@ void omap1_pm_suspend(void) ULPD_RESTORE(ULPD_STATUS_REQ); if (cpu_is_omap7xx()) { - MPUI730_RESTORE(EMIFS_CONFIG); - MPUI730_RESTORE(EMIFF_SDRAM_CONFIG); - MPUI730_RESTORE(OMAP_IH1_MIR); - MPUI730_RESTORE(OMAP_IH2_0_MIR); - MPUI730_RESTORE(OMAP_IH2_1_MIR); + MPUI7XX_RESTORE(EMIFS_CONFIG); + MPUI7XX_RESTORE(EMIFF_SDRAM_CONFIG); + MPUI7XX_RESTORE(OMAP_IH1_MIR); + MPUI7XX_RESTORE(OMAP_IH2_0_MIR); + MPUI7XX_RESTORE(OMAP_IH2_1_MIR); } else if (cpu_is_omap15xx()) { MPUI1510_RESTORE(MPUI_CTRL); MPUI1510_RESTORE(MPUI_DSP_BOOT_CONFIG); @@ -462,12 +462,12 @@ static int omap_pm_read_proc( ULPD_SAVE(ULPD_POWER_CTRL); if (cpu_is_omap7xx()) { - MPUI730_SAVE(MPUI_CTRL); - MPUI730_SAVE(MPUI_DSP_STATUS); - MPUI730_SAVE(MPUI_DSP_BOOT_CONFIG); - MPUI730_SAVE(MPUI_DSP_API_CONFIG); - MPUI730_SAVE(EMIFF_SDRAM_CONFIG); - MPUI730_SAVE(EMIFS_CONFIG); + MPUI7XX_SAVE(MPUI_CTRL); + MPUI7XX_SAVE(MPUI_DSP_STATUS); + MPUI7XX_SAVE(MPUI_DSP_BOOT_CONFIG); + MPUI7XX_SAVE(MPUI_DSP_API_CONFIG); + MPUI7XX_SAVE(EMIFF_SDRAM_CONFIG); + MPUI7XX_SAVE(EMIFS_CONFIG); } else if (cpu_is_omap15xx()) { MPUI1510_SAVE(MPUI_CTRL); MPUI1510_SAVE(MPUI_DSP_STATUS); @@ -519,18 +519,18 @@ static int omap_pm_read_proc( if (cpu_is_omap7xx()) { my_buffer_offset += sprintf(my_base + my_buffer_offset, - "MPUI730_CTRL_REG 0x%-8x \n" - "MPUI730_DSP_STATUS_REG: 0x%-8x \n" - "MPUI730_DSP_BOOT_CONFIG_REG: 0x%-8x \n" - "MPUI730_DSP_API_CONFIG_REG: 0x%-8x \n" - "MPUI730_SDRAM_CONFIG_REG: 0x%-8x \n" - "MPUI730_EMIFS_CONFIG_REG: 0x%-8x \n", - MPUI730_SHOW(MPUI_CTRL), - MPUI730_SHOW(MPUI_DSP_STATUS), - MPUI730_SHOW(MPUI_DSP_BOOT_CONFIG), - MPUI730_SHOW(MPUI_DSP_API_CONFIG), - MPUI730_SHOW(EMIFF_SDRAM_CONFIG), - MPUI730_SHOW(EMIFS_CONFIG)); + "MPUI7XX_CTRL_REG 0x%-8x \n" + "MPUI7XX_DSP_STATUS_REG: 0x%-8x \n" + "MPUI7XX_DSP_BOOT_CONFIG_REG: 0x%-8x \n" + "MPUI7XX_DSP_API_CONFIG_REG: 0x%-8x \n" + "MPUI7XX_SDRAM_CONFIG_REG: 0x%-8x \n" + "MPUI7XX_EMIFS_CONFIG_REG: 0x%-8x \n", + MPUI7XX_SHOW(MPUI_CTRL), + MPUI7XX_SHOW(MPUI_DSP_STATUS), + MPUI7XX_SHOW(MPUI_DSP_BOOT_CONFIG), + MPUI7XX_SHOW(MPUI_DSP_API_CONFIG), + MPUI7XX_SHOW(EMIFF_SDRAM_CONFIG), + MPUI7XX_SHOW(EMIFS_CONFIG)); } else if (cpu_is_omap15xx()) { my_buffer_offset += sprintf(my_base + my_buffer_offset, "MPUI1510_CTRL_REG 0x%-8x \n" @@ -669,8 +669,8 @@ static int __init omap_pm_init(void) * memory the MPU can see when it wakes up. */ if (cpu_is_omap7xx()) { - omap_sram_suspend = omap_sram_push(omap730_cpu_suspend, - omap730_cpu_suspend_sz); + omap_sram_suspend = omap_sram_push(omap7xx_cpu_suspend, + omap7xx_cpu_suspend_sz); } else if (cpu_is_omap15xx()) { omap_sram_suspend = omap_sram_push(omap1510_cpu_suspend, omap1510_cpu_suspend_sz); @@ -701,7 +701,7 @@ static int __init omap_pm_init(void) /* Configure IDLECT3 */ if (cpu_is_omap7xx()) - omap_writel(OMAP730_IDLECT3_VAL, OMAP730_IDLECT3); + omap_writel(OMAP7XX_IDLECT3_VAL, OMAP7XX_IDLECT3); else if (cpu_is_omap16xx()) omap_writel(OMAP1610_IDLECT3_VAL, OMAP1610_IDLECT3); diff --git a/arch/arm/mach-omap1/pm.h b/arch/arm/mach-omap1/pm.h index c4f05bdcf8a..0f20aedd63f 100644 --- a/arch/arm/mach-omap1/pm.h +++ b/arch/arm/mach-omap1/pm.h @@ -98,11 +98,11 @@ #define OMAP1610_IDLECT3 0xfffece24 #define OMAP1610_IDLE_LOOP_REQUEST 0x0400 -#define OMAP730_IDLECT1_SLEEP_VAL 0x16c7 -#define OMAP730_IDLECT2_SLEEP_VAL 0x09c7 -#define OMAP730_IDLECT3_VAL 0x3f -#define OMAP730_IDLECT3 0xfffece24 -#define OMAP730_IDLE_LOOP_REQUEST 0x0C00 +#define OMAP7XX_IDLECT1_SLEEP_VAL 0x16c7 +#define OMAP7XX_IDLECT2_SLEEP_VAL 0x09c7 +#define OMAP7XX_IDLECT3_VAL 0x3f +#define OMAP7XX_IDLECT3 0xfffece24 +#define OMAP7XX_IDLE_LOOP_REQUEST 0x0C00 #if !defined(CONFIG_ARCH_OMAP730) && \ !defined(CONFIG_ARCH_OMAP15XX) && \ @@ -122,17 +122,17 @@ extern void allow_idle_sleep(void); extern void omap1_pm_idle(void); extern void omap1_pm_suspend(void); -extern void omap730_cpu_suspend(unsigned short, unsigned short); +extern void omap7xx_cpu_suspend(unsigned short, unsigned short); extern void omap1510_cpu_suspend(unsigned short, unsigned short); extern void omap1610_cpu_suspend(unsigned short, unsigned short); -extern void omap730_idle_loop_suspend(void); +extern void omap7xx_idle_loop_suspend(void); extern void omap1510_idle_loop_suspend(void); extern void omap1610_idle_loop_suspend(void); -extern unsigned int omap730_cpu_suspend_sz; +extern unsigned int omap7xx_cpu_suspend_sz; extern unsigned int omap1510_cpu_suspend_sz; extern unsigned int omap1610_cpu_suspend_sz; -extern unsigned int omap730_idle_loop_suspend_sz; +extern unsigned int omap7xx_idle_loop_suspend_sz; extern unsigned int omap1510_idle_loop_suspend_sz; extern unsigned int omap1610_idle_loop_suspend_sz; @@ -155,9 +155,9 @@ extern void omap_serial_wake_trigger(int enable); #define ULPD_RESTORE(x) omap_writew((ulpd_sleep_save[ULPD_SLEEP_SAVE_##x]), (x)) #define ULPD_SHOW(x) ulpd_sleep_save[ULPD_SLEEP_SAVE_##x] -#define MPUI730_SAVE(x) mpui730_sleep_save[MPUI730_SLEEP_SAVE_##x] = omap_readl(x) -#define MPUI730_RESTORE(x) omap_writel((mpui730_sleep_save[MPUI730_SLEEP_SAVE_##x]), (x)) -#define MPUI730_SHOW(x) mpui730_sleep_save[MPUI730_SLEEP_SAVE_##x] +#define MPUI7XX_SAVE(x) mpui7xx_sleep_save[MPUI7XX_SLEEP_SAVE_##x] = omap_readl(x) +#define MPUI7XX_RESTORE(x) omap_writel((mpui7xx_sleep_save[MPUI7XX_SLEEP_SAVE_##x]), (x)) +#define MPUI7XX_SHOW(x) mpui7xx_sleep_save[MPUI7XX_SLEEP_SAVE_##x] #define MPUI1510_SAVE(x) mpui1510_sleep_save[MPUI1510_SLEEP_SAVE_##x] = omap_readl(x) #define MPUI1510_RESTORE(x) omap_writel((mpui1510_sleep_save[MPUI1510_SLEEP_SAVE_##x]), (x)) @@ -232,24 +232,24 @@ enum mpui1510_save_state { #endif }; -enum mpui730_save_state { - MPUI730_SLEEP_SAVE_START = 0, +enum mpui7xx_save_state { + MPUI7XX_SLEEP_SAVE_START = 0, /* * MPUI registers 32 bits */ - MPUI730_SLEEP_SAVE_MPUI_CTRL, - MPUI730_SLEEP_SAVE_MPUI_DSP_BOOT_CONFIG, - MPUI730_SLEEP_SAVE_MPUI_DSP_API_CONFIG, - MPUI730_SLEEP_SAVE_MPUI_DSP_STATUS, - MPUI730_SLEEP_SAVE_EMIFF_SDRAM_CONFIG, - MPUI730_SLEEP_SAVE_EMIFS_CONFIG, - MPUI730_SLEEP_SAVE_OMAP_IH1_MIR, - MPUI730_SLEEP_SAVE_OMAP_IH2_0_MIR, - MPUI730_SLEEP_SAVE_OMAP_IH2_1_MIR, -#if defined(CONFIG_ARCH_OMAP730) - MPUI730_SLEEP_SAVE_SIZE + MPUI7XX_SLEEP_SAVE_MPUI_CTRL, + MPUI7XX_SLEEP_SAVE_MPUI_DSP_BOOT_CONFIG, + MPUI7XX_SLEEP_SAVE_MPUI_DSP_API_CONFIG, + MPUI7XX_SLEEP_SAVE_MPUI_DSP_STATUS, + MPUI7XX_SLEEP_SAVE_EMIFF_SDRAM_CONFIG, + MPUI7XX_SLEEP_SAVE_EMIFS_CONFIG, + MPUI7XX_SLEEP_SAVE_OMAP_IH1_MIR, + MPUI7XX_SLEEP_SAVE_OMAP_IH2_0_MIR, + MPUI7XX_SLEEP_SAVE_OMAP_IH2_1_MIR, +#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) + MPUI7XX_SLEEP_SAVE_SIZE #else - MPUI730_SLEEP_SAVE_SIZE = 0 + MPUI7XX_SLEEP_SAVE_SIZE = 0 #endif }; diff --git a/arch/arm/mach-omap1/sleep.S b/arch/arm/mach-omap1/sleep.S index 22e8568339b..ef771ce8b03 100644 --- a/arch/arm/mach-omap1/sleep.S +++ b/arch/arm/mach-omap1/sleep.S @@ -1,7 +1,7 @@ /* * linux/arch/arm/mach-omap1/sleep.S * - * Low-level OMAP730/1510/1610 sleep/wakeUp support + * Low-level OMAP7XX/1510/1610 sleep/wakeUp support * * Initial SA1110 code: * Copyright (c) 2001 Cliff Brake @@ -57,8 +57,8 @@ * */ -#if defined(CONFIG_ARCH_OMAP730) -ENTRY(omap730_cpu_suspend) +#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) +ENTRY(omap7xx_cpu_suspend) @ save registers on stack stmfd sp!, {r0 - r12, lr} @@ -91,13 +91,13 @@ ENTRY(omap730_cpu_suspend) @ turn off clock domains @ do not disable PERCK (0x04) - mov r5, #OMAP730_IDLECT2_SLEEP_VAL & 0xff - orr r5, r5, #OMAP730_IDLECT2_SLEEP_VAL & 0xff00 + mov r5, #OMAP7XX_IDLECT2_SLEEP_VAL & 0xff + orr r5, r5, #OMAP7XX_IDLECT2_SLEEP_VAL & 0xff00 strh r5, [r4, #ARM_IDLECT2_ASM_OFFSET & 0xff] @ request ARM idle - mov r3, #OMAP730_IDLECT1_SLEEP_VAL & 0xff - orr r3, r3, #OMAP730_IDLECT1_SLEEP_VAL & 0xff00 + mov r3, #OMAP7XX_IDLECT1_SLEEP_VAL & 0xff + orr r3, r3, #OMAP7XX_IDLECT1_SLEEP_VAL & 0xff00 strh r3, [r4, #ARM_IDLECT1_ASM_OFFSET & 0xff] @ disable instruction cache @@ -113,7 +113,7 @@ ENTRY(omap730_cpu_suspend) mov r2, #0 mcr p15, 0, r2, c7, c0, 4 @ wait for interrupt /* - * omap730_cpu_suspend()'s resume point. + * omap7xx_cpu_suspend()'s resume point. * * It will just start executing here, so we'll restore stuff from the * stack. @@ -132,9 +132,9 @@ ENTRY(omap730_cpu_suspend) @ restore regs and return ldmfd sp!, {r0 - r12, pc} -ENTRY(omap730_cpu_suspend_sz) - .word . - omap730_cpu_suspend -#endif /* CONFIG_ARCH_OMAP730 */ +ENTRY(omap7xx_cpu_suspend_sz) + .word . - omap7xx_cpu_suspend +#endif /* CONFIG_ARCH_OMAP730 || CONFIG_ARCH_OMAP850 */ #ifdef CONFIG_ARCH_OMAP15XX ENTRY(omap1510_cpu_suspend) diff --git a/arch/arm/plat-omap/devices.c b/arch/arm/plat-omap/devices.c index a64b692a1bf..d2f54753b01 100644 --- a/arch/arm/plat-omap/devices.c +++ b/arch/arm/plat-omap/devices.c @@ -113,17 +113,17 @@ static void omap_init_kp(void) omap_cfg_reg(E19_1610_KBR4); omap_cfg_reg(N19_1610_KBR5); } else if (machine_is_omap_perseus2() || machine_is_omap_fsample()) { - omap_cfg_reg(E2_730_KBR0); - omap_cfg_reg(J7_730_KBR1); - omap_cfg_reg(E1_730_KBR2); - omap_cfg_reg(F3_730_KBR3); - omap_cfg_reg(D2_730_KBR4); - - omap_cfg_reg(C2_730_KBC0); - omap_cfg_reg(D3_730_KBC1); - omap_cfg_reg(E4_730_KBC2); - omap_cfg_reg(F4_730_KBC3); - omap_cfg_reg(E3_730_KBC4); + omap_cfg_reg(E2_7XX_KBR0); + omap_cfg_reg(J7_7XX_KBR1); + omap_cfg_reg(E1_7XX_KBR2); + omap_cfg_reg(F3_7XX_KBR3); + omap_cfg_reg(D2_7XX_KBR4); + + omap_cfg_reg(C2_7XX_KBC0); + omap_cfg_reg(D3_7XX_KBC1); + omap_cfg_reg(E4_7XX_KBC2); + omap_cfg_reg(F4_7XX_KBC3); + omap_cfg_reg(E3_7XX_KBC4); } else if (machine_is_omap_h4()) { omap_cfg_reg(T19_24XX_KBR0); omap_cfg_reg(R19_24XX_KBR1); diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c index 22f6e689f5c..b0c73613a4e 100644 --- a/arch/arm/plat-omap/gpio.c +++ b/arch/arm/plat-omap/gpio.c @@ -68,20 +68,20 @@ #define OMAP1610_GPIO_SET_DATAOUT 0x00f0 /* - * OMAP730 specific GPIO registers + * OMAP7XX specific GPIO registers */ -#define OMAP730_GPIO1_BASE OMAP1_IO_ADDRESS(0xfffbc000) -#define OMAP730_GPIO2_BASE OMAP1_IO_ADDRESS(0xfffbc800) -#define OMAP730_GPIO3_BASE OMAP1_IO_ADDRESS(0xfffbd000) -#define OMAP730_GPIO4_BASE OMAP1_IO_ADDRESS(0xfffbd800) -#define OMAP730_GPIO5_BASE OMAP1_IO_ADDRESS(0xfffbe000) -#define OMAP730_GPIO6_BASE OMAP1_IO_ADDRESS(0xfffbe800) -#define OMAP730_GPIO_DATA_INPUT 0x00 -#define OMAP730_GPIO_DATA_OUTPUT 0x04 -#define OMAP730_GPIO_DIR_CONTROL 0x08 -#define OMAP730_GPIO_INT_CONTROL 0x0c -#define OMAP730_GPIO_INT_MASK 0x10 -#define OMAP730_GPIO_INT_STATUS 0x14 +#define OMAP7XX_GPIO1_BASE OMAP1_IO_ADDRESS(0xfffbc000) +#define OMAP7XX_GPIO2_BASE OMAP1_IO_ADDRESS(0xfffbc800) +#define OMAP7XX_GPIO3_BASE OMAP1_IO_ADDRESS(0xfffbd000) +#define OMAP7XX_GPIO4_BASE OMAP1_IO_ADDRESS(0xfffbd800) +#define OMAP7XX_GPIO5_BASE OMAP1_IO_ADDRESS(0xfffbe000) +#define OMAP7XX_GPIO6_BASE OMAP1_IO_ADDRESS(0xfffbe800) +#define OMAP7XX_GPIO_DATA_INPUT 0x00 +#define OMAP7XX_GPIO_DATA_OUTPUT 0x04 +#define OMAP7XX_GPIO_DIR_CONTROL 0x08 +#define OMAP7XX_GPIO_INT_CONTROL 0x0c +#define OMAP7XX_GPIO_INT_MASK 0x10 +#define OMAP7XX_GPIO_INT_STATUS 0x14 #define OMAP1_MPUIO_VBASE OMAP1_IO_ADDRESS(OMAP1_MPUIO_BASE) @@ -199,7 +199,7 @@ struct gpio_bank { #define METHOD_MPUIO 0 #define METHOD_GPIO_1510 1 #define METHOD_GPIO_1610 2 -#define METHOD_GPIO_730 3 +#define METHOD_GPIO_7XX 3 #define METHOD_GPIO_24XX 5 #ifdef CONFIG_ARCH_OMAP16XX @@ -220,14 +220,14 @@ static struct gpio_bank gpio_bank_1510[2] = { #endif #if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) -static struct gpio_bank gpio_bank_730[7] = { +static struct gpio_bank gpio_bank_7xx[7] = { { OMAP1_MPUIO_VBASE, INT_7XX_MPUIO, IH_MPUIO_BASE, METHOD_MPUIO }, - { OMAP730_GPIO1_BASE, INT_7XX_GPIO_BANK1, IH_GPIO_BASE, METHOD_GPIO_730 }, - { OMAP730_GPIO2_BASE, INT_7XX_GPIO_BANK2, IH_GPIO_BASE + 32, METHOD_GPIO_730 }, - { OMAP730_GPIO3_BASE, INT_7XX_GPIO_BANK3, IH_GPIO_BASE + 64, METHOD_GPIO_730 }, - { OMAP730_GPIO4_BASE, INT_7XX_GPIO_BANK4, IH_GPIO_BASE + 96, METHOD_GPIO_730 }, - { OMAP730_GPIO5_BASE, INT_7XX_GPIO_BANK5, IH_GPIO_BASE + 128, METHOD_GPIO_730 }, - { OMAP730_GPIO6_BASE, INT_7XX_GPIO_BANK6, IH_GPIO_BASE + 160, METHOD_GPIO_730 }, + { OMAP7XX_GPIO1_BASE, INT_7XX_GPIO_BANK1, IH_GPIO_BASE, METHOD_GPIO_7XX }, + { OMAP7XX_GPIO2_BASE, INT_7XX_GPIO_BANK2, IH_GPIO_BASE + 32, METHOD_GPIO_7XX }, + { OMAP7XX_GPIO3_BASE, INT_7XX_GPIO_BANK3, IH_GPIO_BASE + 64, METHOD_GPIO_7XX }, + { OMAP7XX_GPIO4_BASE, INT_7XX_GPIO_BANK4, IH_GPIO_BASE + 96, METHOD_GPIO_7XX }, + { OMAP7XX_GPIO5_BASE, INT_7XX_GPIO_BANK5, IH_GPIO_BASE + 128, METHOD_GPIO_7XX }, + { OMAP7XX_GPIO6_BASE, INT_7XX_GPIO_BANK6, IH_GPIO_BASE + 160, METHOD_GPIO_7XX }, }; #endif @@ -373,8 +373,8 @@ static void _set_gpio_direction(struct gpio_bank *bank, int gpio, int is_input) break; #endif #if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) - case METHOD_GPIO_730: - reg += OMAP730_GPIO_DIR_CONTROL; + case METHOD_GPIO_7XX: + reg += OMAP7XX_GPIO_DIR_CONTROL; break; #endif #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) @@ -435,8 +435,8 @@ static void _set_gpio_dataout(struct gpio_bank *bank, int gpio, int enable) break; #endif #if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) - case METHOD_GPIO_730: - reg += OMAP730_GPIO_DATA_OUTPUT; + case METHOD_GPIO_7XX: + reg += OMAP7XX_GPIO_DATA_OUTPUT; l = __raw_readl(reg); if (enable) l |= 1 << gpio; @@ -493,8 +493,8 @@ static int _get_gpio_datain(struct gpio_bank *bank, int gpio) break; #endif #if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) - case METHOD_GPIO_730: - reg += OMAP730_GPIO_DATA_INPUT; + case METHOD_GPIO_7XX: + reg += OMAP7XX_GPIO_DATA_INPUT; break; #endif #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) @@ -539,8 +539,8 @@ static int _get_gpio_dataout(struct gpio_bank *bank, int gpio) break; #endif #if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) - case METHOD_GPIO_730: - reg += OMAP730_GPIO_DATA_OUTPUT; + case METHOD_GPIO_7XX: + reg += OMAP7XX_GPIO_DATA_OUTPUT; break; #endif #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \ @@ -743,8 +743,8 @@ static int _set_gpio_triggering(struct gpio_bank *bank, int gpio, int trigger) break; #endif #if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) - case METHOD_GPIO_730: - reg += OMAP730_GPIO_INT_CONTROL; + case METHOD_GPIO_7XX: + reg += OMAP7XX_GPIO_INT_CONTROL; l = __raw_readl(reg); if (trigger & IRQ_TYPE_EDGE_RISING) l |= 1 << gpio; @@ -831,8 +831,8 @@ static void _clear_gpio_irqbank(struct gpio_bank *bank, int gpio_mask) break; #endif #if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) - case METHOD_GPIO_730: - reg += OMAP730_GPIO_INT_STATUS; + case METHOD_GPIO_7XX: + reg += OMAP7XX_GPIO_INT_STATUS; break; #endif #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) @@ -900,8 +900,8 @@ static u32 _get_gpio_irqbank_mask(struct gpio_bank *bank) break; #endif #if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) - case METHOD_GPIO_730: - reg += OMAP730_GPIO_INT_MASK; + case METHOD_GPIO_7XX: + reg += OMAP7XX_GPIO_INT_MASK; mask = 0xffffffff; inv = 1; break; @@ -966,8 +966,8 @@ static void _enable_gpio_irqbank(struct gpio_bank *bank, int gpio_mask, int enab break; #endif #if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) - case METHOD_GPIO_730: - reg += OMAP730_GPIO_INT_MASK; + case METHOD_GPIO_7XX: + reg += OMAP7XX_GPIO_INT_MASK; l = __raw_readl(reg); if (enable) l &= ~(gpio_mask); @@ -1161,8 +1161,8 @@ static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc) isr_reg = bank->base + OMAP1610_GPIO_IRQSTATUS1; #endif #if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) - if (bank->method == METHOD_GPIO_730) - isr_reg = bank->base + OMAP730_GPIO_INT_STATUS; + if (bank->method == METHOD_GPIO_7XX) + isr_reg = bank->base + OMAP7XX_GPIO_INT_STATUS; #endif #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) if (bank->method == METHOD_GPIO_24XX) @@ -1431,8 +1431,8 @@ static int gpio_is_input(struct gpio_bank *bank, int mask) case METHOD_GPIO_1610: reg += OMAP1610_GPIO_DIRECTION; break; - case METHOD_GPIO_730: - reg += OMAP730_GPIO_DIR_CONTROL; + case METHOD_GPIO_7XX: + reg += OMAP7XX_GPIO_DIR_CONTROL; break; case METHOD_GPIO_24XX: reg += OMAP24XX_GPIO_OE; @@ -1603,7 +1603,7 @@ static int __init _omap_gpio_init(void) if (cpu_is_omap7xx()) { printk(KERN_INFO "OMAP7XX GPIO hardware\n"); gpio_bank_count = 7; - gpio_bank = gpio_bank_730; + gpio_bank = gpio_bank_7xx; } #endif #ifdef CONFIG_ARCH_OMAP24XX @@ -1664,11 +1664,11 @@ static int __init _omap_gpio_init(void) __raw_writew(0xffff, bank->base + OMAP1610_GPIO_IRQSTATUS1); __raw_writew(0x0014, bank->base + OMAP1610_GPIO_SYSCONFIG); } - if (cpu_is_omap7xx() && bank->method == METHOD_GPIO_730) { - __raw_writel(0xffffffff, bank->base + OMAP730_GPIO_INT_MASK); - __raw_writel(0x00000000, bank->base + OMAP730_GPIO_INT_STATUS); + if (cpu_is_omap7xx() && bank->method == METHOD_GPIO_7XX) { + __raw_writel(0xffffffff, bank->base + OMAP7XX_GPIO_INT_MASK); + __raw_writel(0x00000000, bank->base + OMAP7XX_GPIO_INT_STATUS); - gpio_count = 32; /* 730 has 32-bit GPIOs */ + gpio_count = 32; /* 7xx has 32-bit GPIOs */ } #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \ diff --git a/arch/arm/plat-omap/include/mach/mcbsp.h b/arch/arm/plat-omap/include/mach/mcbsp.h index 0b476b909aa..7e9cae3e3d1 100644 --- a/arch/arm/plat-omap/include/mach/mcbsp.h +++ b/arch/arm/plat-omap/include/mach/mcbsp.h @@ -30,8 +30,8 @@ #include #include -#define OMAP730_MCBSP1_BASE 0xfffb1000 -#define OMAP730_MCBSP2_BASE 0xfffb1800 +#define OMAP7XX_MCBSP1_BASE 0xfffb1000 +#define OMAP7XX_MCBSP2_BASE 0xfffb1800 #define OMAP1510_MCBSP1_BASE 0xe1011800 #define OMAP1510_MCBSP2_BASE 0xfffb1000 diff --git a/arch/arm/plat-omap/include/mach/mux.h b/arch/arm/plat-omap/include/mach/mux.h index 66ae302f0c0..f3c1d8a9045 100644 --- a/arch/arm/plat-omap/include/mach/mux.h +++ b/arch/arm/plat-omap/include/mach/mux.h @@ -51,12 +51,12 @@ .pu_pd_reg = PU_PD_SEL_##reg, \ .pu_pd_val = status, -#define MUX_REG_730(reg, mode_offset, mode) .mux_reg_name = "OMAP7XX_IO_CONF_"#reg, \ +#define MUX_REG_7XX(reg, mode_offset, mode) .mux_reg_name = "OMAP7XX_IO_CONF_"#reg, \ .mux_reg = OMAP7XX_IO_CONF_##reg, \ .mask_offset = mode_offset, \ .mask = mode, -#define PULL_REG_730(reg, bit, status) .pull_name = "OMAP7XX_IO_CONF_"#reg, \ +#define PULL_REG_7XX(reg, bit, status) .pull_name = "OMAP7XX_IO_CONF_"#reg, \ .pull_reg = OMAP7XX_IO_CONF_##reg, \ .pull_bit = bit, \ .pull_val = status, @@ -74,12 +74,12 @@ #define PU_PD_REG(reg, status) .pu_pd_reg = PU_PD_SEL_##reg, \ .pu_pd_val = status, -#define MUX_REG_730(reg, mode_offset, mode) \ +#define MUX_REG_7XX(reg, mode_offset, mode) \ .mux_reg = OMAP7XX_IO_CONF_##reg, \ .mask_offset = mode_offset, \ .mask = mode, -#define PULL_REG_730(reg, bit, status) .pull_reg = OMAP7XX_IO_CONF_##reg, \ +#define PULL_REG_7XX(reg, bit, status) .pull_reg = OMAP7XX_IO_CONF_##reg, \ .pull_bit = bit, \ .pull_val = status, @@ -104,13 +104,13 @@ * - for pull-up/down, only has one enable bit which is is in the same register * as mux config */ -#define MUX_CFG_730(desc, mux_reg, mode_offset, mode, \ +#define MUX_CFG_7XX(desc, mux_reg, mode_offset, mode, \ pull_bit, pull_status, debug_status)\ { \ .name = desc, \ .debug = debug_status, \ - MUX_REG_730(mux_reg, mode_offset, mode) \ - PULL_REG_730(mux_reg, pull_bit, pull_status) \ + MUX_REG_7XX(mux_reg, mode_offset, mode) \ + PULL_REG_7XX(mux_reg, pull_bit, pull_status) \ PU_PD_REG(NA, 0) \ }, @@ -202,23 +202,23 @@ struct pin_config { }; -enum omap730_index { +enum omap7xx_index { /* OMAP 730 keyboard */ - E2_730_KBR0, - J7_730_KBR1, - E1_730_KBR2, - F3_730_KBR3, - D2_730_KBR4, - C2_730_KBC0, - D3_730_KBC1, - E4_730_KBC2, - F4_730_KBC3, - E3_730_KBC4, + E2_7XX_KBR0, + J7_7XX_KBR1, + E1_7XX_KBR2, + F3_7XX_KBR3, + D2_7XX_KBR4, + C2_7XX_KBC0, + D3_7XX_KBC1, + E4_7XX_KBC2, + F4_7XX_KBC3, + E3_7XX_KBC4, /* USB */ - AA17_730_USB_DM, - W16_730_USB_PU_EN, - W17_730_USB_VBUSI, + AA17_7XX_USB_DM, + W16_7XX_USB_PU_EN, + W17_7XX_USB_VBUSI, }; enum omap1xxx_index { -- cgit v1.2.3-70-g09d2 From ab985ff471048479b475f973358ccc6af8e42bc4 Mon Sep 17 00:00:00 2001 From: Angelo Arrifano Date: Fri, 4 Sep 2009 23:41:49 +0100 Subject: OMAP7XX: Clocks: Add ck_ref and armxor These clocks are required for booting. Signed-off-by: Angelo Arrifano Signed-off-by: Alistair Buxton Reviewed-by: Zebediah C. McClure --- arch/arm/mach-omap1/clock.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap1/clock.c b/arch/arm/mach-omap1/clock.c index d2b00a56393..5f77b8355b4 100644 --- a/arch/arm/mach-omap1/clock.c +++ b/arch/arm/mach-omap1/clock.c @@ -75,7 +75,7 @@ struct omap_clk { static struct omap_clk omap_clks[] = { /* non-ULPD clocks */ - CLK(NULL, "ck_ref", &ck_ref, CK_16XX | CK_1510 | CK_310), + CLK(NULL, "ck_ref", &ck_ref, CK_16XX | CK_1510 | CK_310 | CK_7XX), CLK(NULL, "ck_dpll1", &ck_dpll1, CK_16XX | CK_1510 | CK_310), /* CK_GEN1 clocks */ CLK(NULL, "ck_dpll1out", &ck_dpll1out.clk, CK_16XX), @@ -83,7 +83,7 @@ static struct omap_clk omap_clks[] = { CLK(NULL, "arm_ck", &arm_ck, CK_16XX | CK_1510 | CK_310), CLK(NULL, "armper_ck", &armper_ck.clk, CK_16XX | CK_1510 | CK_310), CLK(NULL, "arm_gpio_ck", &arm_gpio_ck, CK_1510 | CK_310), - CLK(NULL, "armxor_ck", &armxor_ck.clk, CK_16XX | CK_1510 | CK_310), + CLK(NULL, "armxor_ck", &armxor_ck.clk, CK_16XX | CK_1510 | CK_310 | CK_7XX), CLK(NULL, "armtim_ck", &armtim_ck.clk, CK_16XX | CK_1510 | CK_310), CLK("omap_wdt", "fck", &armwdt_ck.clk, CK_16XX | CK_1510 | CK_310), CLK("omap_wdt", "ick", &armper_ck.clk, CK_16XX), -- cgit v1.2.3-70-g09d2 From 1f73b4de93e06d18c28cb282761c8507bc476489 Mon Sep 17 00:00:00 2001 From: Alistair Buxton Date: Fri, 18 Sep 2009 20:53:04 +0100 Subject: OMAP850: PM: Add an ARCH_OMAP850 check This just makes the same warning be printed on omap850 and omap730. Signed-off-by: Alistair Buxton --- arch/arm/mach-omap1/pm.h | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/arm/mach-omap1/pm.h b/arch/arm/mach-omap1/pm.h index 0f20aedd63f..56a647986ae 100644 --- a/arch/arm/mach-omap1/pm.h +++ b/arch/arm/mach-omap1/pm.h @@ -105,6 +105,7 @@ #define OMAP7XX_IDLE_LOOP_REQUEST 0x0C00 #if !defined(CONFIG_ARCH_OMAP730) && \ + !defined(CONFIG_ARCH_OMAP850) && \ !defined(CONFIG_ARCH_OMAP15XX) && \ !defined(CONFIG_ARCH_OMAP16XX) #warning "Power management for this processor not implemented yet" -- cgit v1.2.3-70-g09d2 From f8631e7bba34d46d6ccea4cd90f7a0482770ff70 Mon Sep 17 00:00:00 2001 From: Alistair Buxton Date: Tue, 22 Sep 2009 10:05:30 +0100 Subject: OMAP850: Fix zImage booting This adds the OMAP850 JTAG ID to the IDs checked by OMAP uncompress.h putc. Without this putc hangs up trying to check the uarts and zImage crashes. Signed-off-by: Alistair Buxton --- arch/arm/plat-omap/include/mach/uncompress.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/plat-omap/include/mach/uncompress.h b/arch/arm/plat-omap/include/mach/uncompress.h index 0814c5f210c..ddf7b88dec4 100644 --- a/arch/arm/plat-omap/include/mach/uncompress.h +++ b/arch/arm/plat-omap/include/mach/uncompress.h @@ -25,6 +25,7 @@ unsigned int system_rev; #define UART_OMAP_MDR1 0x08 /* mode definition register */ #define OMAP_ID_730 0x355F +#define OMAP_ID_850 0x362C #define ID_MASK 0x7fff #define check_port(base, shift) ((base[UART_OMAP_MDR1 << shift] & 7) == 0) #define omap_get_id() ((*(volatile unsigned int *)(0xfffed404)) >> 12) & ID_MASK @@ -53,7 +54,7 @@ static void putc(int c) /* MMU is not on, so cpu_is_omapXXXX() won't work here */ unsigned int omap_id = omap_get_id(); - if (omap_id == OMAP_ID_730) + if (omap_id == OMAP_ID_730 || omap_id == OMAP_ID_850) shift = 0; if (check_port(uart, shift)) -- cgit v1.2.3-70-g09d2