From ad67ef6848a1608b0430003e11e7af1ce706e341 Mon Sep 17 00:00:00 2001 From: Paul Walmsley Date: Tue, 19 Aug 2008 11:08:40 +0300 Subject: ARM: OMAP2: Powerdomain: Add base OMAP2/3 powerdomain code This patch creates an interface to the powerdomain registers in the PRM/CM modules on OMAP2/3. This interface is intended to be used by PM code, e.g., pm.c; not by device drivers directly. Each powerdomain will be defined in later patches as static structures. Also defined are dependencies between powerdomains, used for adding and removing PM_WKDEP and CM_SLEEPDEP bits. The powerdomain structures are linked into a list at boot by pwrdm_register(), similar to the OMAP clock code. The patch adds a Kconfig option, CONFIG_OMAP_DEBUG_POWERDOMAIN, which when enabled will emit verbose debug messages via pr_debug(). Signed-off-by: Paul Walmsley Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/Makefile | 2 +- arch/arm/mach-omap2/clock34xx.c | 27 +- arch/arm/mach-omap2/powerdomain.c | 909 ++++++++++++++++++++++++++ arch/arm/plat-omap/Kconfig | 12 + arch/arm/plat-omap/include/mach/powerdomain.h | 139 ++++ 5 files changed, 1078 insertions(+), 11 deletions(-) create mode 100644 arch/arm/mach-omap2/powerdomain.c create mode 100644 arch/arm/plat-omap/include/mach/powerdomain.h (limited to 'arch') diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index 93ee990618e..1001d42048e 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -4,7 +4,7 @@ # Common support obj-y := irq.o id.o io.o memory.o control.o prcm.o clock.o mux.o \ - devices.o serial.o gpmc.o timer-gp.o + devices.o serial.o gpmc.o timer-gp.o powerdomain.o obj-$(CONFIG_OMAP_MCBSP) += mcbsp.o diff --git a/arch/arm/mach-omap2/clock34xx.c b/arch/arm/mach-omap2/clock34xx.c index 3ff74952f83..dff7a72fefc 100644 --- a/arch/arm/mach-omap2/clock34xx.c +++ b/arch/arm/mach-omap2/clock34xx.c @@ -62,11 +62,14 @@ static void omap3_dpll_recalc(struct clk *clk) static void _omap3_dpll_write_clken(struct clk *clk, u8 clken_bits) { const struct dpll_data *dd; + u32 v; dd = clk->dpll_data; - cm_rmw_reg_bits(dd->enable_mask, clken_bits << __ffs(dd->enable_mask), - dd->control_reg); + v = __raw_readl(dd->control_reg); + v &= ~dd->enable_mask; + v |= clken_bits << __ffs(dd->enable_mask); + __raw_writel(v, dd->control_reg); } /* _omap3_wait_dpll_status: wait for a DPLL to enter a specific state */ @@ -82,7 +85,7 @@ static int _omap3_wait_dpll_status(struct clk *clk, u8 state) state <<= dd->idlest_bit; idlest_mask = 1 << dd->idlest_bit; - while (((cm_read_reg(dd->idlest_reg) & idlest_mask) != state) && + while (((__raw_readl(dd->idlest_reg) & idlest_mask) != state) && i < MAX_DPLL_WAIT_TRIES) { i++; udelay(1); @@ -285,7 +288,7 @@ static u32 omap3_dpll_autoidle_read(struct clk *clk) dd = clk->dpll_data; - v = cm_read_reg(dd->autoidle_reg); + v = __raw_readl(dd->autoidle_reg); v &= dd->autoidle_mask; v >>= __ffs(dd->autoidle_mask); @@ -304,6 +307,7 @@ static u32 omap3_dpll_autoidle_read(struct clk *clk) static void omap3_dpll_allow_idle(struct clk *clk) { const struct dpll_data *dd; + u32 v; if (!clk || !clk->dpll_data) return; @@ -315,9 +319,10 @@ static void omap3_dpll_allow_idle(struct clk *clk) * by writing 0x5 instead of 0x1. Add some mechanism to * optionally enter this mode. */ - cm_rmw_reg_bits(dd->autoidle_mask, - DPLL_AUTOIDLE_LOW_POWER_STOP << __ffs(dd->autoidle_mask), - dd->autoidle_reg); + v = __raw_readl(dd->autoidle_reg); + v &= ~dd->autoidle_mask; + v |= DPLL_AUTOIDLE_LOW_POWER_STOP << __ffs(dd->autoidle_mask); + __raw_writel(v, dd->autoidle_reg); } /** @@ -329,15 +334,17 @@ static void omap3_dpll_allow_idle(struct clk *clk) static void omap3_dpll_deny_idle(struct clk *clk) { const struct dpll_data *dd; + u32 v; if (!clk || !clk->dpll_data) return; dd = clk->dpll_data; - cm_rmw_reg_bits(dd->autoidle_mask, - DPLL_AUTOIDLE_DISABLE << __ffs(dd->autoidle_mask), - dd->autoidle_reg); + v = __raw_readl(dd->autoidle_reg); + v &= ~dd->autoidle_mask; + v |= DPLL_AUTOIDLE_DISABLE << __ffs(dd->autoidle_mask); + __raw_writel(v, dd->autoidle_reg); } /* Clock control for DPLL outputs */ diff --git a/arch/arm/mach-omap2/powerdomain.c b/arch/arm/mach-omap2/powerdomain.c new file mode 100644 index 00000000000..1ec003832ef --- /dev/null +++ b/arch/arm/mach-omap2/powerdomain.c @@ -0,0 +1,909 @@ +/* + * OMAP powerdomain control + * + * Copyright (C) 2007-2008 Texas Instruments, Inc. + * Copyright (C) 2007-2008 Nokia Corporation + * + * Written by Paul Walmsley + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifdef CONFIG_OMAP_DEBUG_POWERDOMAIN +# define DEBUG +#endif + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +#include "cm.h" +#include "cm-regbits-34xx.h" +#include "prm.h" +#include "prm-regbits-34xx.h" + +#include +#include + +/* pwrdm_list contains all registered struct powerdomains */ +static LIST_HEAD(pwrdm_list); + +/* + * pwrdm_rwlock protects pwrdm_list add and del ops - also reused to + * protect pwrdm_clkdms[] during clkdm add/del ops + */ +static DEFINE_RWLOCK(pwrdm_rwlock); + + +/* Private functions */ + +static u32 prm_read_mod_bits_shift(s16 domain, s16 idx, u32 mask) +{ + u32 v; + + v = prm_read_mod_reg(domain, idx); + v &= mask; + v >>= __ffs(mask); + + return v; +} + +static struct powerdomain *_pwrdm_lookup(const char *name) +{ + struct powerdomain *pwrdm, *temp_pwrdm; + + pwrdm = NULL; + + list_for_each_entry(temp_pwrdm, &pwrdm_list, node) { + if (!strcmp(name, temp_pwrdm->name)) { + pwrdm = temp_pwrdm; + break; + } + } + + return pwrdm; +} + +/* _pwrdm_deps_lookup - look up the specified powerdomain in a pwrdm list */ +static struct powerdomain *_pwrdm_deps_lookup(struct powerdomain *pwrdm, + struct pwrdm_dep *deps) +{ + struct pwrdm_dep *pd; + + if (!pwrdm || !deps || !omap_chip_is(pwrdm->omap_chip)) + return ERR_PTR(-EINVAL); + + for (pd = deps; pd; pd++) { + + if (!omap_chip_is(pd->omap_chip)) + continue; + + if (!pd->pwrdm && pd->pwrdm_name) + pd->pwrdm = pwrdm_lookup(pd->pwrdm_name); + + if (pd->pwrdm == pwrdm) + break; + + } + + if (!pd) + return ERR_PTR(-ENOENT); + + return pd->pwrdm; +} + + +/* Public functions */ + +/** + * pwrdm_init - set up the powerdomain layer + * + * Loop through the list of powerdomains, registering all that are + * available on the current CPU. If pwrdm_list is supplied and not + * null, all of the referenced powerdomains will be registered. No + * return value. + */ +void pwrdm_init(struct powerdomain **pwrdm_list) +{ + struct powerdomain **p = NULL; + + if (pwrdm_list) + for (p = pwrdm_list; *p; p++) + pwrdm_register(*p); +} + +/** + * pwrdm_register - register a powerdomain + * @pwrdm: struct powerdomain * to register + * + * Adds a powerdomain to the internal powerdomain list. Returns + * -EINVAL if given a null pointer, -EEXIST if a powerdomain is + * already registered by the provided name, or 0 upon success. + */ +int pwrdm_register(struct powerdomain *pwrdm) +{ + unsigned long flags; + int ret = -EINVAL; + + if (!pwrdm) + return -EINVAL; + + if (!omap_chip_is(pwrdm->omap_chip)) + return -EINVAL; + + write_lock_irqsave(&pwrdm_rwlock, flags); + if (_pwrdm_lookup(pwrdm->name)) { + ret = -EEXIST; + goto pr_unlock; + } + + list_add(&pwrdm->node, &pwrdm_list); + + pr_debug("powerdomain: registered %s\n", pwrdm->name); + ret = 0; + +pr_unlock: + write_unlock_irqrestore(&pwrdm_rwlock, flags); + + return ret; +} + +/** + * pwrdm_unregister - unregister a powerdomain + * @pwrdm: struct powerdomain * to unregister + * + * Removes a powerdomain from the internal powerdomain list. Returns + * -EINVAL if pwrdm argument is NULL. + */ +int pwrdm_unregister(struct powerdomain *pwrdm) +{ + unsigned long flags; + + if (!pwrdm) + return -EINVAL; + + write_lock_irqsave(&pwrdm_rwlock, flags); + list_del(&pwrdm->node); + write_unlock_irqrestore(&pwrdm_rwlock, flags); + + pr_debug("powerdomain: unregistered %s\n", pwrdm->name); + + return 0; +} + +/** + * pwrdm_lookup - look up a powerdomain by name, return a pointer + * @name: name of powerdomain + * + * Find a registered powerdomain by its name. Returns a pointer to the + * struct powerdomain if found, or NULL otherwise. + */ +struct powerdomain *pwrdm_lookup(const char *name) +{ + struct powerdomain *pwrdm; + unsigned long flags; + + if (!name) + return NULL; + + read_lock_irqsave(&pwrdm_rwlock, flags); + pwrdm = _pwrdm_lookup(name); + read_unlock_irqrestore(&pwrdm_rwlock, flags); + + return pwrdm; +} + +/** + * pwrdm_for_each - call function on each registered clockdomain + * @fn: callback function * + * + * Call the supplied function for each registered powerdomain. The + * callback function can return anything but 0 to bail out early from + * the iterator. The callback function is called with the pwrdm_rwlock + * held for reading, so no powerdomain structure manipulation + * functions should be called from the callback, although hardware + * powerdomain control functions are fine. Returns the last return + * value of the callback function, which should be 0 for success or + * anything else to indicate failure; or -EINVAL if the function + * pointer is null. + */ +int pwrdm_for_each(int (*fn)(struct powerdomain *pwrdm)) +{ + struct powerdomain *temp_pwrdm; + unsigned long flags; + int ret = 0; + + if (!fn) + return -EINVAL; + + read_lock_irqsave(&pwrdm_rwlock, flags); + list_for_each_entry(temp_pwrdm, &pwrdm_list, node) { + ret = (*fn)(temp_pwrdm); + if (ret) + break; + } + read_unlock_irqrestore(&pwrdm_rwlock, flags); + + return ret; +} + +/** + * pwrdm_add_wkdep - add a wakeup dependency from pwrdm2 to pwrdm1 + * @pwrdm1: wake this struct powerdomain * up (dependent) + * @pwrdm2: when this struct powerdomain * wakes up (source) + * + * When the powerdomain represented by pwrdm2 wakes up (due to an + * interrupt), wake up pwrdm1. Implemented in hardware on the OMAP, + * this feature is designed to reduce wakeup latency of the dependent + * powerdomain. Returns -EINVAL if presented with invalid powerdomain + * pointers, -ENOENT if pwrdm2 cannot wake up pwrdm1 in hardware, or + * 0 upon success. + */ +int pwrdm_add_wkdep(struct powerdomain *pwrdm1, struct powerdomain *pwrdm2) +{ + struct powerdomain *p; + + if (!pwrdm1) + return -EINVAL; + + p = _pwrdm_deps_lookup(pwrdm2, pwrdm1->wkdep_srcs); + if (IS_ERR(p)) { + pr_debug("powerdomain: hardware cannot set/clear wake up of " + "%s when %s wakes up\n", pwrdm1->name, pwrdm2->name); + return IS_ERR(p); + } + + pr_debug("powerdomain: hardware will wake up %s when %s wakes up\n", + pwrdm1->name, pwrdm2->name); + + prm_set_mod_reg_bits((1 << pwrdm2->dep_bit), + pwrdm1->prcm_offs, PM_WKDEP); + + return 0; +} + +/** + * pwrdm_del_wkdep - remove a wakeup dependency from pwrdm2 to pwrdm1 + * @pwrdm1: wake this struct powerdomain * up (dependent) + * @pwrdm2: when this struct powerdomain * wakes up (source) + * + * Remove a wakeup dependency that causes pwrdm1 to wake up when pwrdm2 + * wakes up. Returns -EINVAL if presented with invalid powerdomain + * pointers, -ENOENT if pwrdm2 cannot wake up pwrdm1 in hardware, or + * 0 upon success. + */ +int pwrdm_del_wkdep(struct powerdomain *pwrdm1, struct powerdomain *pwrdm2) +{ + struct powerdomain *p; + + if (!pwrdm1) + return -EINVAL; + + p = _pwrdm_deps_lookup(pwrdm2, pwrdm1->wkdep_srcs); + if (IS_ERR(p)) { + pr_debug("powerdomain: hardware cannot set/clear wake up of " + "%s when %s wakes up\n", pwrdm1->name, pwrdm2->name); + return IS_ERR(p); + } + + pr_debug("powerdomain: hardware will no longer wake up %s after %s " + "wakes up\n", pwrdm1->name, pwrdm2->name); + + prm_clear_mod_reg_bits((1 << pwrdm2->dep_bit), + pwrdm1->prcm_offs, PM_WKDEP); + + return 0; +} + +/** + * pwrdm_read_wkdep - read wakeup dependency state from pwrdm2 to pwrdm1 + * @pwrdm1: wake this struct powerdomain * up (dependent) + * @pwrdm2: when this struct powerdomain * wakes up (source) + * + * Return 1 if a hardware wakeup dependency exists wherein pwrdm1 will be + * awoken when pwrdm2 wakes up; 0 if dependency is not set; -EINVAL + * if either powerdomain pointer is invalid; or -ENOENT if the hardware + * is incapable. + * + * REVISIT: Currently this function only represents software-controllable + * wakeup dependencies. Wakeup dependencies fixed in hardware are not + * yet handled here. + */ +int pwrdm_read_wkdep(struct powerdomain *pwrdm1, struct powerdomain *pwrdm2) +{ + struct powerdomain *p; + + if (!pwrdm1) + return -EINVAL; + + p = _pwrdm_deps_lookup(pwrdm2, pwrdm1->wkdep_srcs); + if (IS_ERR(p)) { + pr_debug("powerdomain: hardware cannot set/clear wake up of " + "%s when %s wakes up\n", pwrdm1->name, pwrdm2->name); + return IS_ERR(p); + } + + return prm_read_mod_bits_shift(pwrdm1->prcm_offs, PM_WKDEP, + (1 << pwrdm2->dep_bit)); +} + +/** + * pwrdm_add_sleepdep - add a sleep dependency from pwrdm2 to pwrdm1 + * @pwrdm1: prevent this struct powerdomain * from sleeping (dependent) + * @pwrdm2: when this struct powerdomain * is active (source) + * + * Prevent pwrdm1 from automatically going inactive (and then to + * retention or off) if pwrdm2 is still active. Returns -EINVAL if + * presented with invalid powerdomain pointers or called on a machine + * that does not support software-configurable hardware sleep dependencies, + * -ENOENT if the specified dependency cannot be set in hardware, or + * 0 upon success. + */ +int pwrdm_add_sleepdep(struct powerdomain *pwrdm1, struct powerdomain *pwrdm2) +{ + struct powerdomain *p; + + if (!pwrdm1) + return -EINVAL; + + if (!cpu_is_omap34xx()) + return -EINVAL; + + p = _pwrdm_deps_lookup(pwrdm2, pwrdm1->sleepdep_srcs); + if (IS_ERR(p)) { + pr_debug("powerdomain: hardware cannot set/clear sleep " + "dependency affecting %s from %s\n", pwrdm1->name, + pwrdm2->name); + return IS_ERR(p); + } + + pr_debug("powerdomain: will prevent %s from sleeping if %s is active\n", + pwrdm1->name, pwrdm2->name); + + cm_set_mod_reg_bits((1 << pwrdm2->dep_bit), + pwrdm1->prcm_offs, OMAP3430_CM_SLEEPDEP); + + return 0; +} + +/** + * pwrdm_del_sleepdep - remove a sleep dependency from pwrdm2 to pwrdm1 + * @pwrdm1: prevent this struct powerdomain * from sleeping (dependent) + * @pwrdm2: when this struct powerdomain * is active (source) + * + * Allow pwrdm1 to automatically go inactive (and then to retention or + * off), independent of the activity state of pwrdm2. Returns -EINVAL + * if presented with invalid powerdomain pointers or called on a machine + * that does not support software-configurable hardware sleep dependencies, + * -ENOENT if the specified dependency cannot be cleared in hardware, or + * 0 upon success. + */ +int pwrdm_del_sleepdep(struct powerdomain *pwrdm1, struct powerdomain *pwrdm2) +{ + struct powerdomain *p; + + if (!pwrdm1) + return -EINVAL; + + if (!cpu_is_omap34xx()) + return -EINVAL; + + p = _pwrdm_deps_lookup(pwrdm2, pwrdm1->sleepdep_srcs); + if (IS_ERR(p)) { + pr_debug("powerdomain: hardware cannot set/clear sleep " + "dependency affecting %s from %s\n", pwrdm1->name, + pwrdm2->name); + return IS_ERR(p); + } + + pr_debug("powerdomain: will no longer prevent %s from sleeping if " + "%s is active\n", pwrdm1->name, pwrdm2->name); + + cm_clear_mod_reg_bits((1 << pwrdm2->dep_bit), + pwrdm1->prcm_offs, OMAP3430_CM_SLEEPDEP); + + return 0; +} + +/** + * pwrdm_read_sleepdep - read sleep dependency state from pwrdm2 to pwrdm1 + * @pwrdm1: prevent this struct powerdomain * from sleeping (dependent) + * @pwrdm2: when this struct powerdomain * is active (source) + * + * Return 1 if a hardware sleep dependency exists wherein pwrdm1 will + * not be allowed to automatically go inactive if pwrdm2 is active; + * 0 if pwrdm1's automatic power state inactivity transition is independent + * of pwrdm2's; -EINVAL if either powerdomain pointer is invalid or called + * on a machine that does not support software-configurable hardware sleep + * dependencies; or -ENOENT if the hardware is incapable. + * + * REVISIT: Currently this function only represents software-controllable + * sleep dependencies. Sleep dependencies fixed in hardware are not + * yet handled here. + */ +int pwrdm_read_sleepdep(struct powerdomain *pwrdm1, struct powerdomain *pwrdm2) +{ + struct powerdomain *p; + + if (!pwrdm1) + return -EINVAL; + + if (!cpu_is_omap34xx()) + return -EINVAL; + + p = _pwrdm_deps_lookup(pwrdm2, pwrdm1->sleepdep_srcs); + if (IS_ERR(p)) { + pr_debug("powerdomain: hardware cannot set/clear sleep " + "dependency affecting %s from %s\n", pwrdm1->name, + pwrdm2->name); + return IS_ERR(p); + } + + return prm_read_mod_bits_shift(pwrdm1->prcm_offs, OMAP3430_CM_SLEEPDEP, + (1 << pwrdm2->dep_bit)); +} + +/** + * pwrdm_get_mem_bank_count - get number of memory banks in this powerdomain + * @pwrdm: struct powerdomain * + * + * Return the number of controllable memory banks in powerdomain pwrdm, + * starting with 1. Returns -EINVAL if the powerdomain pointer is null. + */ +int pwrdm_get_mem_bank_count(struct powerdomain *pwrdm) +{ + if (!pwrdm) + return -EINVAL; + + return pwrdm->banks; +} + +/** + * pwrdm_set_next_pwrst - set next powerdomain power state + * @pwrdm: struct powerdomain * to set + * @pwrst: one of the PWRDM_POWER_* macros + * + * Set the powerdomain pwrdm's next power state to pwrst. The powerdomain + * may not enter this state immediately if the preconditions for this state + * have not been satisfied. Returns -EINVAL if the powerdomain pointer is + * null or if the power state is invalid for the powerdomin, or returns 0 + * upon success. + */ +int pwrdm_set_next_pwrst(struct powerdomain *pwrdm, u8 pwrst) +{ + if (!pwrdm) + return -EINVAL; + + if (!(pwrdm->pwrsts & (1 << pwrst))) + return -EINVAL; + + pr_debug("powerdomain: setting next powerstate for %s to %0x\n", + pwrdm->name, pwrst); + + prm_rmw_mod_reg_bits(OMAP_POWERSTATE_MASK, + (pwrst << OMAP_POWERSTATE_SHIFT), + pwrdm->prcm_offs, PM_PWSTCTRL); + + return 0; +} + +/** + * pwrdm_read_next_pwrst - get next powerdomain power state + * @pwrdm: struct powerdomain * to get power state + * + * Return the powerdomain pwrdm's next power state. Returns -EINVAL + * if the powerdomain pointer is null or returns the next power state + * upon success. + */ +int pwrdm_read_next_pwrst(struct powerdomain *pwrdm) +{ + if (!pwrdm) + return -EINVAL; + + return prm_read_mod_bits_shift(pwrdm->prcm_offs, PM_PWSTCTRL, + OMAP_POWERSTATE_MASK); +} + +/** + * pwrdm_read_pwrst - get current powerdomain power state + * @pwrdm: struct powerdomain * to get power state + * + * Return the powerdomain pwrdm's current power state. Returns -EINVAL + * if the powerdomain pointer is null or returns the current power state + * upon success. + */ +int pwrdm_read_pwrst(struct powerdomain *pwrdm) +{ + if (!pwrdm) + return -EINVAL; + + return prm_read_mod_bits_shift(pwrdm->prcm_offs, PM_PWSTST, + OMAP_POWERSTATEST_MASK); +} + +/** + * pwrdm_read_prev_pwrst - get previous powerdomain power state + * @pwrdm: struct powerdomain * to get previous power state + * + * Return the powerdomain pwrdm's previous power state. Returns -EINVAL + * if the powerdomain pointer is null or returns the previous power state + * upon success. + */ +int pwrdm_read_prev_pwrst(struct powerdomain *pwrdm) +{ + if (!pwrdm) + return -EINVAL; + + return prm_read_mod_bits_shift(pwrdm->prcm_offs, OMAP3430_PM_PREPWSTST, + OMAP3430_LASTPOWERSTATEENTERED_MASK); +} + +/** + * pwrdm_set_logic_retst - set powerdomain logic power state upon retention + * @pwrdm: struct powerdomain * to set + * @pwrst: one of the PWRDM_POWER_* macros + * + * Set the next power state that the logic portion of the powerdomain + * pwrdm will enter when the powerdomain enters retention. This will + * be either RETENTION or OFF, if supported. Returns -EINVAL if the + * powerdomain pointer is null or the target power state is not not + * supported, or returns 0 upon success. + */ +int pwrdm_set_logic_retst(struct powerdomain *pwrdm, u8 pwrst) +{ + if (!pwrdm) + return -EINVAL; + + if (!(pwrdm->pwrsts_logic_ret & (1 << pwrst))) + return -EINVAL; + + pr_debug("powerdomain: setting next logic powerstate for %s to %0x\n", + pwrdm->name, pwrst); + + /* + * The register bit names below may not correspond to the + * actual names of the bits in each powerdomain's register, + * but the type of value returned is the same for each + * powerdomain. + */ + prm_rmw_mod_reg_bits(OMAP3430_LOGICL1CACHERETSTATE, + (pwrst << __ffs(OMAP3430_LOGICL1CACHERETSTATE)), + pwrdm->prcm_offs, PM_PWSTCTRL); + + return 0; +} + +/** + * pwrdm_set_mem_onst - set memory power state while powerdomain ON + * @pwrdm: struct powerdomain * to set + * @bank: memory bank number to set (0-3) + * @pwrst: one of the PWRDM_POWER_* macros + * + * Set the next power state that memory bank x of the powerdomain + * pwrdm will enter when the powerdomain enters the ON state. Bank + * will be a number from 0 to 3, and represents different types of + * memory, depending on the powerdomain. Returns -EINVAL if the + * powerdomain pointer is null or the target power state is not not + * supported for this memory bank, -EEXIST if the target memory bank + * does not exist or is not controllable, or returns 0 upon success. + */ +int pwrdm_set_mem_onst(struct powerdomain *pwrdm, u8 bank, u8 pwrst) +{ + u32 m; + + if (!pwrdm) + return -EINVAL; + + if (pwrdm->banks < (bank + 1)) + return -EEXIST; + + if (!(pwrdm->pwrsts_mem_on[bank] & (1 << pwrst))) + return -EINVAL; + + pr_debug("powerdomain: setting next memory powerstate for domain %s " + "bank %0x while pwrdm-ON to %0x\n", pwrdm->name, bank, pwrst); + + /* + * The register bit names below may not correspond to the + * actual names of the bits in each powerdomain's register, + * but the type of value returned is the same for each + * powerdomain. + */ + switch (bank) { + case 0: + m = OMAP3430_SHAREDL1CACHEFLATONSTATE_MASK; + break; + case 1: + m = OMAP3430_L1FLATMEMONSTATE_MASK; + break; + case 2: + m = OMAP3430_SHAREDL2CACHEFLATONSTATE_MASK; + break; + case 3: + m = OMAP3430_L2FLATMEMONSTATE_MASK; + break; + default: + WARN_ON(1); /* should never happen */ + return -EEXIST; + } + + prm_rmw_mod_reg_bits(m, (pwrst << __ffs(m)), + pwrdm->prcm_offs, PM_PWSTCTRL); + + return 0; +} + +/** + * pwrdm_set_mem_retst - set memory power state while powerdomain in RET + * @pwrdm: struct powerdomain * to set + * @bank: memory bank number to set (0-3) + * @pwrst: one of the PWRDM_POWER_* macros + * + * Set the next power state that memory bank x of the powerdomain + * pwrdm will enter when the powerdomain enters the RETENTION state. + * Bank will be a number from 0 to 3, and represents different types + * of memory, depending on the powerdomain. pwrst will be either + * RETENTION or OFF, if supported. Returns -EINVAL if the powerdomain + * pointer is null or the target power state is not not supported for + * this memory bank, -EEXIST if the target memory bank does not exist + * or is not controllable, or returns 0 upon success. + */ +int pwrdm_set_mem_retst(struct powerdomain *pwrdm, u8 bank, u8 pwrst) +{ + u32 m; + + if (!pwrdm) + return -EINVAL; + + if (pwrdm->banks < (bank + 1)) + return -EEXIST; + + if (!(pwrdm->pwrsts_mem_ret[bank] & (1 << pwrst))) + return -EINVAL; + + pr_debug("powerdomain: setting next memory powerstate for domain %s " + "bank %0x while pwrdm-RET to %0x\n", pwrdm->name, bank, pwrst); + + /* + * The register bit names below may not correspond to the + * actual names of the bits in each powerdomain's register, + * but the type of value returned is the same for each + * powerdomain. + */ + switch (bank) { + case 0: + m = OMAP3430_SHAREDL1CACHEFLATRETSTATE; + break; + case 1: + m = OMAP3430_L1FLATMEMRETSTATE; + break; + case 2: + m = OMAP3430_SHAREDL2CACHEFLATRETSTATE; + break; + case 3: + m = OMAP3430_L2FLATMEMRETSTATE; + break; + default: + WARN_ON(1); /* should never happen */ + return -EEXIST; + } + + prm_rmw_mod_reg_bits(m, (pwrst << __ffs(m)), pwrdm->prcm_offs, + PM_PWSTCTRL); + + return 0; +} + +/** + * pwrdm_read_logic_pwrst - get current powerdomain logic retention power state + * @pwrdm: struct powerdomain * to get current logic retention power state + * + * Return the current power state that the logic portion of + * powerdomain pwrdm will enter + * Returns -EINVAL if the powerdomain pointer is null or returns the + * current logic retention power state upon success. + */ +int pwrdm_read_logic_pwrst(struct powerdomain *pwrdm) +{ + if (!pwrdm) + return -EINVAL; + + return prm_read_mod_bits_shift(pwrdm->prcm_offs, PM_PWSTST, + OMAP3430_LOGICSTATEST); +} + +/** + * pwrdm_read_prev_logic_pwrst - get previous powerdomain logic power state + * @pwrdm: struct powerdomain * to get previous logic power state + * + * Return the powerdomain pwrdm's logic power state. Returns -EINVAL + * if the powerdomain pointer is null or returns the previous logic + * power state upon success. + */ +int pwrdm_read_prev_logic_pwrst(struct powerdomain *pwrdm) +{ + if (!pwrdm) + return -EINVAL; + + /* + * The register bit names below may not correspond to the + * actual names of the bits in each powerdomain's register, + * but the type of value returned is the same for each + * powerdomain. + */ + return prm_read_mod_bits_shift(pwrdm->prcm_offs, OMAP3430_PM_PREPWSTST, + OMAP3430_LASTLOGICSTATEENTERED); +} + +/** + * pwrdm_read_mem_pwrst - get current memory bank power state + * @pwrdm: struct powerdomain * to get current memory bank power state + * @bank: memory bank number (0-3) + * + * Return the powerdomain pwrdm's current memory power state for bank + * x. Returns -EINVAL if the powerdomain pointer is null, -EEXIST if + * the target memory bank does not exist or is not controllable, or + * returns the current memory power state upon success. + */ +int pwrdm_read_mem_pwrst(struct powerdomain *pwrdm, u8 bank) +{ + u32 m; + + if (!pwrdm) + return -EINVAL; + + if (pwrdm->banks < (bank + 1)) + return -EEXIST; + + /* + * The register bit names below may not correspond to the + * actual names of the bits in each powerdomain's register, + * but the type of value returned is the same for each + * powerdomain. + */ + switch (bank) { + case 0: + m = OMAP3430_SHAREDL1CACHEFLATSTATEST_MASK; + break; + case 1: + m = OMAP3430_L1FLATMEMSTATEST_MASK; + break; + case 2: + m = OMAP3430_SHAREDL2CACHEFLATSTATEST_MASK; + break; + case 3: + m = OMAP3430_L2FLATMEMSTATEST_MASK; + break; + default: + WARN_ON(1); /* should never happen */ + return -EEXIST; + } + + return prm_read_mod_bits_shift(pwrdm->prcm_offs, PM_PWSTST, m); +} + +/** + * pwrdm_read_prev_mem_pwrst - get previous memory bank power state + * @pwrdm: struct powerdomain * to get previous memory bank power state + * @bank: memory bank number (0-3) + * + * Return the powerdomain pwrdm's previous memory power state for bank + * x. Returns -EINVAL if the powerdomain pointer is null, -EEXIST if + * the target memory bank does not exist or is not controllable, or + * returns the previous memory power state upon success. + */ +int pwrdm_read_prev_mem_pwrst(struct powerdomain *pwrdm, u8 bank) +{ + u32 m; + + if (!pwrdm) + return -EINVAL; + + if (pwrdm->banks < (bank + 1)) + return -EEXIST; + + /* + * The register bit names below may not correspond to the + * actual names of the bits in each powerdomain's register, + * but the type of value returned is the same for each + * powerdomain. + */ + switch (bank) { + case 0: + m = OMAP3430_LASTMEM1STATEENTERED_MASK; + break; + case 1: + m = OMAP3430_LASTMEM2STATEENTERED_MASK; + break; + case 2: + m = OMAP3430_LASTSHAREDL2CACHEFLATSTATEENTERED_MASK; + break; + case 3: + m = OMAP3430_LASTL2FLATMEMSTATEENTERED_MASK; + break; + default: + WARN_ON(1); /* should never happen */ + return -EEXIST; + } + + return prm_read_mod_bits_shift(pwrdm->prcm_offs, + OMAP3430_PM_PREPWSTST, m); +} + +/** + * pwrdm_clear_all_prev_pwrst - clear previous powerstate register for a pwrdm + * @pwrdm: struct powerdomain * to clear + * + * Clear the powerdomain's previous power state register. Clears the + * entire register, including logic and memory bank previous power states. + * Returns -EINVAL if the powerdomain pointer is null, or returns 0 upon + * success. + */ +int pwrdm_clear_all_prev_pwrst(struct powerdomain *pwrdm) +{ + if (!pwrdm) + return -EINVAL; + + /* + * XXX should get the powerdomain's current state here; + * warn & fail if it is not ON. + */ + + pr_debug("powerdomain: clearing previous power state reg for %s\n", + pwrdm->name); + + prm_write_mod_reg(0, pwrdm->prcm_offs, OMAP3430_PM_PREPWSTST); + + return 0; +} + +/** + * pwrdm_wait_transition - wait for powerdomain power transition to finish + * @pwrdm: struct powerdomain * to wait for + * + * If the powerdomain pwrdm is in the process of a state transition, + * spin until it completes the power transition, or until an iteration + * bailout value is reached. Returns -EINVAL if the powerdomain + * pointer is null, -EAGAIN if the bailout value was reached, or + * returns 0 upon success. + */ +int pwrdm_wait_transition(struct powerdomain *pwrdm) +{ + u32 c = 0; + + if (!pwrdm) + return -EINVAL; + + /* + * REVISIT: pwrdm_wait_transition() may be better implemented + * via a callback and a periodic timer check -- how long do we expect + * powerdomain transitions to take? + */ + + /* XXX Is this udelay() value meaningful? */ + while ((prm_read_mod_reg(pwrdm->prcm_offs, PM_PWSTST) & + OMAP_INTRANSITION) && + (c++ < PWRDM_TRANSITION_BAILOUT)) + udelay(1); + + if (c >= PWRDM_TRANSITION_BAILOUT) { + printk(KERN_ERR "powerdomain: waited too long for " + "powerdomain %s to complete transition\n", pwrdm->name); + return -EAGAIN; + } + + pr_debug("powerdomain: completed transition in %d loops\n", c); + + return 0; +} + + diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig index b917206ee90..e815fa35f7f 100644 --- a/arch/arm/plat-omap/Kconfig +++ b/arch/arm/plat-omap/Kconfig @@ -29,6 +29,18 @@ config OMAP_DEBUG_LEDS depends on OMAP_DEBUG_DEVICES default y if LEDS || LEDS_OMAP_DEBUG +config OMAP_DEBUG_POWERDOMAIN + bool "Emit debug messages from powerdomain layer" + depends on ARCH_OMAP2 || ARCH_OMAP3 + default n + help + Say Y here if you want to compile in powerdomain layer + debugging messages for OMAP2/3. These messages can + provide more detail as to why some powerdomain calls + may be failing, and will also emit a descriptive message + for every powerdomain register write. However, the + extra detail costs some memory. + config OMAP_RESET_CLOCKS bool "Reset unused clocks during boot" depends on ARCH_OMAP diff --git a/arch/arm/plat-omap/include/mach/powerdomain.h b/arch/arm/plat-omap/include/mach/powerdomain.h new file mode 100644 index 00000000000..c8f52c6f8b7 --- /dev/null +++ b/arch/arm/plat-omap/include/mach/powerdomain.h @@ -0,0 +1,139 @@ +/* + * OMAP2/3 powerdomain control + * + * Copyright (C) 2007-8 Texas Instruments, Inc. + * Copyright (C) 2007-8 Nokia Corporation + * + * Written by Paul Walmsley + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef ASM_ARM_ARCH_OMAP_POWERDOMAIN +#define ASM_ARM_ARCH_OMAP_POWERDOMAIN + +#include +#include + +#include + +#include + + +/* Powerdomain basic power states */ +#define PWRDM_POWER_OFF 0x0 +#define PWRDM_POWER_RET 0x1 +#define PWRDM_POWER_INACTIVE 0x2 +#define PWRDM_POWER_ON 0x3 + +/* Powerdomain allowable state bitfields */ +#define PWRSTS_OFF_ON ((1 << PWRDM_POWER_OFF) | \ + (1 << PWRDM_POWER_ON)) + +#define PWRSTS_OFF_RET ((1 << PWRDM_POWER_OFF) | \ + (1 << PWRDM_POWER_RET)) + +#define PWRSTS_OFF_RET_ON (PWRSTS_OFF_RET | (1 << PWRDM_POWER_ON)) + + +/* + * Number of memory banks that are power-controllable. On OMAP3430, the + * maximum is 4. + */ +#define PWRDM_MAX_MEM_BANKS 4 + +/* XXX A completely arbitrary number. What is reasonable here? */ +#define PWRDM_TRANSITION_BAILOUT 100000 + +struct powerdomain; + +/* Encodes dependencies between powerdomains - statically defined */ +struct pwrdm_dep { + + /* Powerdomain name */ + const char *pwrdm_name; + + /* Powerdomain pointer - resolved by the powerdomain code */ + struct powerdomain *pwrdm; + + /* Flags to mark OMAP chip restrictions, etc. */ + const struct omap_chip_id omap_chip; + +}; + +struct powerdomain { + + /* Powerdomain name */ + const char *name; + + /* the address offset from CM_BASE/PRM_BASE */ + const s16 prcm_offs; + + /* Used to represent the OMAP chip types containing this pwrdm */ + const struct omap_chip_id omap_chip; + + /* Bit shift of this powerdomain's PM_WKDEP/CM_SLEEPDEP bit */ + const u8 dep_bit; + + /* Powerdomains that can be told to wake this powerdomain up */ + struct pwrdm_dep *wkdep_srcs; + + /* Powerdomains that can be told to keep this pwrdm from inactivity */ + struct pwrdm_dep *sleepdep_srcs; + + /* Possible powerdomain power states */ + const u8 pwrsts; + + /* Possible logic power states when pwrdm in RETENTION */ + const u8 pwrsts_logic_ret; + + /* Number of software-controllable memory banks in this powerdomain */ + const u8 banks; + + /* Possible memory bank pwrstates when pwrdm in RETENTION */ + const u8 pwrsts_mem_ret[PWRDM_MAX_MEM_BANKS]; + + /* Possible memory bank pwrstates when pwrdm is ON */ + const u8 pwrsts_mem_on[PWRDM_MAX_MEM_BANKS]; + + struct list_head node; + +}; + + +void pwrdm_init(struct powerdomain **pwrdm_list); + +int pwrdm_register(struct powerdomain *pwrdm); +int pwrdm_unregister(struct powerdomain *pwrdm); +struct powerdomain *pwrdm_lookup(const char *name); + +int pwrdm_for_each(int (*fn)(struct powerdomain *pwrdm)); + +int pwrdm_add_wkdep(struct powerdomain *pwrdm1, struct powerdomain *pwrdm2); +int pwrdm_del_wkdep(struct powerdomain *pwrdm1, struct powerdomain *pwrdm2); +int pwrdm_read_wkdep(struct powerdomain *pwrdm1, struct powerdomain *pwrdm2); +int pwrdm_add_sleepdep(struct powerdomain *pwrdm1, struct powerdomain *pwrdm2); +int pwrdm_del_sleepdep(struct powerdomain *pwrdm1, struct powerdomain *pwrdm2); +int pwrdm_read_sleepdep(struct powerdomain *pwrdm1, struct powerdomain *pwrdm2); + +int pwrdm_get_mem_bank_count(struct powerdomain *pwrdm); + +int pwrdm_set_next_pwrst(struct powerdomain *pwrdm, u8 pwrst); +int pwrdm_read_next_pwrst(struct powerdomain *pwrdm); +int pwrdm_read_prev_pwrst(struct powerdomain *pwrdm); +int pwrdm_clear_all_prev_pwrst(struct powerdomain *pwrdm); + +int pwrdm_set_logic_retst(struct powerdomain *pwrdm, u8 pwrst); +int pwrdm_set_mem_onst(struct powerdomain *pwrdm, u8 bank, u8 pwrst); +int pwrdm_set_mem_retst(struct powerdomain *pwrdm, u8 bank, u8 pwrst); + +int pwrdm_read_logic_pwrst(struct powerdomain *pwrdm); +int pwrdm_read_prev_logic_pwrst(struct powerdomain *pwrdm); +int pwrdm_read_mem_pwrst(struct powerdomain *pwrdm, u8 bank); +int pwrdm_read_prev_mem_pwrst(struct powerdomain *pwrdm, u8 bank); + +int pwrdm_wait_transition(struct powerdomain *pwrdm); + +#endif -- cgit v1.2.3-70-g09d2 From 9717100f77538bbee54d2b5c293fd829b252d2a6 Mon Sep 17 00:00:00 2001 From: Paul Walmsley Date: Tue, 19 Aug 2008 11:08:40 +0300 Subject: ARM: OMAP2: Powerdomain: Add OMAP2/3 common powerdomains Add powerdomains common to both OMAP2 and OMAP3 (WKUP and GFX/SGX). Modify mach-omap2/io.c to initialize the powerdomain code on boot. Signed-off-by: Paul Walmsley Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/io.c | 5 ++ arch/arm/mach-omap2/powerdomains.h | 147 +++++++++++++++++++++++++++++++++++++ arch/arm/mach-omap2/prm.h | 3 +- 3 files changed, 154 insertions(+), 1 deletion(-) create mode 100644 arch/arm/mach-omap2/powerdomains.h (limited to 'arch') diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c index 987351f07d7..5f73cf0bb7e 100644 --- a/arch/arm/mach-omap2/io.c +++ b/arch/arm/mach-omap2/io.c @@ -24,6 +24,10 @@ #include #include +#include + +#include "powerdomains.h" + extern void omap_sram_init(void); extern int omap2_clk_init(void); extern void omap2_check_revision(void); @@ -101,6 +105,7 @@ void __init omap2_map_common_io(void) void __init omap2_init_common_hw(void) { omap2_mux_init(); + pwrdm_init(powerdomains_omap); omap2_clk_init(); /* * Need to Fix this for 2430 diff --git a/arch/arm/mach-omap2/powerdomains.h b/arch/arm/mach-omap2/powerdomains.h new file mode 100644 index 00000000000..1936df23559 --- /dev/null +++ b/arch/arm/mach-omap2/powerdomains.h @@ -0,0 +1,147 @@ +/* + * OMAP2/3 common powerdomain definitions + * + * Copyright (C) 2007-8 Texas Instruments, Inc. + * Copyright (C) 2007-8 Nokia Corporation + * + * Written by Paul Walmsley + * Debugging and integration fixes by Jouni Högander + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef ARCH_ARM_MACH_OMAP2_POWERDOMAINS +#define ARCH_ARM_MACH_OMAP2_POWERDOMAINS + +/* + * This file contains all of the powerdomains that have some element + * of software control for the OMAP24xx and OMAP34XX chips. + * + * A few notes: + * + * This is not an exhaustive listing of powerdomains on the chips; only + * powerdomains that can be controlled in software. + * + * A useful validation rule for struct powerdomain: + * Any powerdomain referenced by a wkdep_srcs or sleepdep_srcs array + * must have a dep_bit assigned. So wkdep_srcs/sleepdep_srcs are really + * just software-controllable dependencies. Non-software-controllable + * dependencies do exist, but they are not encoded below (yet). + * + * 24xx does not support programmable sleep dependencies (SLEEPDEP) + * + */ + +/* + * The names for the DSP/IVA2 powerdomains are confusing. + * + * Most OMAP chips have an on-board DSP. + * + * On the 2420, this is a 'C55 DSP called, simply, the DSP. Its + * powerdomain is called the "DSP power domain." On the 2430, the + * on-board DSP is a 'C64 DSP, now called the IVA2 or IVA2.1. Its + * powerdomain is still called the "DSP power domain." On the 3430, + * the DSP is a 'C64 DSP like the 2430, also known as the IVA2; but + * its powerdomain is now called the "IVA2 power domain." + * + * The 2420 also has something called the IVA, which is a separate ARM + * core, and has nothing to do with the DSP/IVA2. + * + * Ideally the DSP/IVA2 could just be the same powerdomain, but the PRCM + * address offset is different between the C55 and C64 DSPs. + * + * The overly-specific dep_bit names are due to a bit name collision + * with CM_FCLKEN_{DSP,IVA2}. The DSP/IVA2 PM_WKDEP and CM_SLEEPDEP shift + * value are the same for all powerdomains: 2 + */ + +/* + * XXX should dep_bit be a mask, so we can test to see if it is 0 as a + * sanity check? + * XXX encode hardware fixed wakeup dependencies -- esp. for 3430 CORE + */ + +#include + +#include "prcm-common.h" +#include "prm.h" +#include "cm.h" + +/* OMAP2/3-common powerdomains and wakeup dependencies */ + +/* + * 2420/2430 PM_WKDEP_GFX: CORE, MPU, WKUP + * 3430ES1 PM_WKDEP_GFX: adds IVA2, removes CORE + * 3430ES2 PM_WKDEP_SGX: adds IVA2, removes CORE + */ +static struct pwrdm_dep gfx_sgx_wkdeps[] = { + { + .pwrdm_name = "core_pwrdm", + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX) + }, + { + .pwrdm_name = "iva2_pwrdm", + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430) + }, + { + .pwrdm_name = "mpu_pwrdm", + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX | + CHIP_IS_OMAP3430) + }, + { + .pwrdm_name = "wkup_pwrdm", + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX | + CHIP_IS_OMAP3430) + }, + { NULL }, +}; + +/* + * OMAP2/3 common powerdomains + */ + +/* XXX add sleepdeps for this powerdomain : 3430 */ + +/* + * The GFX powerdomain is not present on 3430ES2, but currently we do not + * have a macro to filter it out at compile-time. + */ +static struct powerdomain gfx_pwrdm = { + .name = "gfx_pwrdm", + .prcm_offs = GFX_MOD, + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX | + CHIP_IS_OMAP3430ES1), + .wkdep_srcs = gfx_sgx_wkdeps, + .pwrsts = PWRSTS_OFF_RET_ON, + .pwrsts_logic_ret = PWRDM_POWER_RET, + .banks = 1, + .pwrsts_mem_ret = { + [0] = PWRDM_POWER_RET, /* MEMRETSTATE */ + }, + .pwrsts_mem_on = { + [0] = PWRDM_POWER_ON, /* MEMONSTATE */ + }, +}; + +static struct powerdomain wkup_pwrdm = { + .name = "wkup_pwrdm", + .prcm_offs = WKUP_MOD, + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX | CHIP_IS_OMAP3430), + .dep_bit = OMAP_EN_WKUP_SHIFT, +}; + + + +/* As powerdomains are added or removed above, this list must also be changed */ +static struct powerdomain *powerdomains_omap[] __initdata = { + + &gfx_pwrdm, + &wkup_pwrdm, + + NULL +}; + + +#endif diff --git a/arch/arm/mach-omap2/prm.h b/arch/arm/mach-omap2/prm.h index bbf41fc8e9a..eb9982fb21d 100644 --- a/arch/arm/mach-omap2/prm.h +++ b/arch/arm/mach-omap2/prm.h @@ -305,7 +305,8 @@ static inline u32 prm_clear_mod_reg_bits(u32 bits, s16 module, s16 idx) * 3430: PM_WKDEP_IVA2, PM_WKDEP_GFX, PM_WKDEP_DSS, PM_WKDEP_CAM, * PM_WKDEP_PER */ -#define OMAP_EN_WKUP (1 << 4) +#define OMAP_EN_WKUP_SHIFT 4 +#define OMAP_EN_WKUP_MASK (1 << 4) /* * 24XX: PM_PWSTCTRL_MPU, PM_PWSTCTRL_CORE, PM_PWSTCTRL_GFX, -- cgit v1.2.3-70-g09d2 From fe6a58f8f50500a4c9a82da4a9bdae41c1500fa0 Mon Sep 17 00:00:00 2001 From: Paul Walmsley Date: Tue, 19 Aug 2008 11:08:42 +0300 Subject: ARM: OMAP2: Powerdomain: Add OMAP2 powerdomains Add OMAP2-specific powerdomains. Signed-off-by: Paul Walmsley Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/powerdomains.h | 14 +++ arch/arm/mach-omap2/powerdomains24xx.h | 200 +++++++++++++++++++++++++++++++++ arch/arm/mach-omap2/prm-regbits-24xx.h | 12 +- 3 files changed, 222 insertions(+), 4 deletions(-) create mode 100644 arch/arm/mach-omap2/powerdomains24xx.h (limited to 'arch') diff --git a/arch/arm/mach-omap2/powerdomains.h b/arch/arm/mach-omap2/powerdomains.h index 1936df23559..325e2ba0406 100644 --- a/arch/arm/mach-omap2/powerdomains.h +++ b/arch/arm/mach-omap2/powerdomains.h @@ -98,6 +98,10 @@ static struct pwrdm_dep gfx_sgx_wkdeps[] = { { NULL }, }; + +#include "powerdomains24xx.h" + + /* * OMAP2/3 common powerdomains */ @@ -140,6 +144,16 @@ static struct powerdomain *powerdomains_omap[] __initdata = { &gfx_pwrdm, &wkup_pwrdm, +#ifdef CONFIG_ARCH_OMAP24XX + &dsp_pwrdm, + &mpu_24xx_pwrdm, + &core_24xx_pwrdm, +#endif + +#ifdef CONFIG_ARCH_OMAP2430 + &mdm_pwrdm, +#endif + NULL }; diff --git a/arch/arm/mach-omap2/powerdomains24xx.h b/arch/arm/mach-omap2/powerdomains24xx.h new file mode 100644 index 00000000000..9f08dc3f7fd --- /dev/null +++ b/arch/arm/mach-omap2/powerdomains24xx.h @@ -0,0 +1,200 @@ +/* + * OMAP24XX powerdomain definitions + * + * Copyright (C) 2007-2008 Texas Instruments, Inc. + * Copyright (C) 2007-2008 Nokia Corporation + * + * Written by Paul Walmsley + * Debugging and integration fixes by Jouni Högander + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef ARCH_ARM_MACH_OMAP2_POWERDOMAINS24XX +#define ARCH_ARM_MACH_OMAP2_POWERDOMAINS24XX + +/* + * N.B. If powerdomains are added or removed from this file, update + * the array in mach-omap2/powerdomains.h. + */ + +#include + +#include "prcm-common.h" +#include "prm.h" +#include "prm-regbits-24xx.h" +#include "cm.h" +#include "cm-regbits-24xx.h" + +/* 24XX powerdomains and dependencies */ + +#ifdef CONFIG_ARCH_OMAP24XX + + +/* Wakeup dependency source arrays */ + +/* + * 2420/2430 PM_WKDEP_DSP: CORE, MPU, WKUP + * 2430 PM_WKDEP_MDM: same as above + */ +static struct pwrdm_dep dsp_mdm_24xx_wkdeps[] = { + { + .pwrdm_name = "core_pwrdm", + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX) + }, + { + .pwrdm_name = "mpu_pwrdm", + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX) + }, + { + .pwrdm_name = "wkup_pwrdm", + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX) + }, + { NULL }, +}; + +/* + * 2420 PM_WKDEP_MPU: CORE, DSP, WKUP + * 2430 adds MDM + */ +static struct pwrdm_dep mpu_24xx_wkdeps[] = { + { + .pwrdm_name = "core_pwrdm", + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX) + }, + { + .pwrdm_name = "dsp_pwrdm", + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX) + }, + { + .pwrdm_name = "wkup_pwrdm", + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX) + }, + { + .pwrdm_name = "mdm_pwrdm", + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430) + }, + { NULL }, +}; + +/* + * 2420 PM_WKDEP_CORE: DSP, GFX, MPU, WKUP + * 2430 adds MDM + */ +static struct pwrdm_dep core_24xx_wkdeps[] = { + { + .pwrdm_name = "dsp_pwrdm", + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX) + }, + { + .pwrdm_name = "gfx_pwrdm", + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX) + }, + { + .pwrdm_name = "mpu_pwrdm", + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX) + }, + { + .pwrdm_name = "wkup_pwrdm", + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX) + }, + { + .pwrdm_name = "mdm_pwrdm", + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430) + }, + { NULL }, +}; + + +/* Powerdomains */ + +static struct powerdomain dsp_pwrdm = { + .name = "dsp_pwrdm", + .prcm_offs = OMAP24XX_DSP_MOD, + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX), + .dep_bit = OMAP24XX_PM_WKDEP_MPU_EN_DSP_SHIFT, + .wkdep_srcs = dsp_mdm_24xx_wkdeps, + .pwrsts = PWRSTS_OFF_RET_ON, + .pwrsts_logic_ret = PWRDM_POWER_RET, + .banks = 1, + .pwrsts_mem_ret = { + [0] = PWRDM_POWER_RET, + }, + .pwrsts_mem_on = { + [0] = PWRDM_POWER_ON, + }, +}; + +static struct powerdomain mpu_24xx_pwrdm = { + .name = "mpu_pwrdm", + .prcm_offs = MPU_MOD, + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX), + .dep_bit = OMAP24XX_EN_MPU_SHIFT, + .wkdep_srcs = mpu_24xx_wkdeps, + .pwrsts = PWRSTS_OFF_RET_ON, + .pwrsts_logic_ret = PWRSTS_OFF_RET, + .banks = 1, + .pwrsts_mem_ret = { + [0] = PWRDM_POWER_RET, + }, + .pwrsts_mem_on = { + [0] = PWRDM_POWER_ON, + }, +}; + +static struct powerdomain core_24xx_pwrdm = { + .name = "core_pwrdm", + .prcm_offs = CORE_MOD, + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX), + .wkdep_srcs = core_24xx_wkdeps, + .pwrsts = PWRSTS_OFF_RET_ON, + .dep_bit = OMAP24XX_EN_CORE_SHIFT, + .banks = 3, + .pwrsts_mem_ret = { + [0] = PWRSTS_OFF_RET, /* MEM1RETSTATE */ + [1] = PWRSTS_OFF_RET, /* MEM2RETSTATE */ + [2] = PWRSTS_OFF_RET, /* MEM3RETSTATE */ + }, + .pwrsts_mem_on = { + [0] = PWRSTS_OFF_RET_ON, /* MEM1ONSTATE */ + [1] = PWRSTS_OFF_RET_ON, /* MEM2ONSTATE */ + [2] = PWRSTS_OFF_RET_ON, /* MEM3ONSTATE */ + }, +}; + +#endif /* CONFIG_ARCH_OMAP24XX */ + + + +/* + * 2430-specific powerdomains + */ + +#ifdef CONFIG_ARCH_OMAP2430 + +/* XXX 2430 KILLDOMAINWKUP bit? No current users apparently */ + +/* Another case of bit name collisions between several registers: EN_MDM */ +static struct powerdomain mdm_pwrdm = { + .name = "mdm_pwrdm", + .prcm_offs = OMAP2430_MDM_MOD, + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430), + .dep_bit = OMAP2430_PM_WKDEP_MPU_EN_MDM_SHIFT, + .wkdep_srcs = dsp_mdm_24xx_wkdeps, + .pwrsts = PWRSTS_OFF_RET_ON, + .pwrsts_logic_ret = PWRDM_POWER_RET, + .banks = 1, + .pwrsts_mem_ret = { + [0] = PWRDM_POWER_RET, /* MEMRETSTATE */ + }, + .pwrsts_mem_on = { + [0] = PWRDM_POWER_ON, /* MEMONSTATE */ + }, +}; + +#endif /* CONFIG_ARCH_OMAP2430 */ + + +#endif diff --git a/arch/arm/mach-omap2/prm-regbits-24xx.h b/arch/arm/mach-omap2/prm-regbits-24xx.h index c6d17a3378e..4002051c20b 100644 --- a/arch/arm/mach-omap2/prm-regbits-24xx.h +++ b/arch/arm/mach-omap2/prm-regbits-24xx.h @@ -29,8 +29,10 @@ #define OMAP24XX_WKUP1_EN (1 << 0) /* PM_WKDEP_GFX, PM_WKDEP_MPU, PM_WKDEP_DSP, PM_WKDEP_MDM shared bits */ -#define OMAP24XX_EN_MPU (1 << 1) -#define OMAP24XX_EN_CORE (1 << 0) +#define OMAP24XX_EN_MPU_SHIFT 1 +#define OMAP24XX_EN_MPU_MASK (1 << 1) +#define OMAP24XX_EN_CORE_SHIFT 0 +#define OMAP24XX_EN_CORE_MASK (1 << 0) /* * PM_PWSTCTRL_MPU, PM_PWSTCTRL_GFX, PM_PWSTCTRL_DSP, PM_PWSTCTRL_MDM @@ -140,8 +142,10 @@ /* 2430 calls GLOBALWMPU_RST "GLOBALWARM_RST" instead */ /* PM_WKDEP_MPU specific bits */ -#define OMAP2430_PM_WKDEP_MPU_EN_MDM (1 << 5) -#define OMAP24XX_PM_WKDEP_MPU_EN_DSP (1 << 2) +#define OMAP2430_PM_WKDEP_MPU_EN_MDM_SHIFT 5 +#define OMAP2430_PM_WKDEP_MPU_EN_MDM_MASK (1 << 5) +#define OMAP24XX_PM_WKDEP_MPU_EN_DSP_SHIFT 2 +#define OMAP24XX_PM_WKDEP_MPU_EN_DSP_MASK (1 << 2) /* PM_EVGENCTRL_MPU specific bits */ -- cgit v1.2.3-70-g09d2 From ecb24aa129c6d4b2152571f856320aa7dea41676 Mon Sep 17 00:00:00 2001 From: Paul Walmsley Date: Tue, 19 Aug 2008 11:08:43 +0300 Subject: ARM: OMAP: Powerdomain: Add OMAP3 powerdomains Add OMAP3-specific powerdomains. Signed-off-by: Paul Walmsley Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/powerdomains.h | 30 ++- arch/arm/mach-omap2/powerdomains34xx.h | 327 +++++++++++++++++++++++++++++++++ arch/arm/mach-omap2/prcm-common.h | 3 +- arch/arm/mach-omap2/prm-regbits-34xx.h | 11 +- 4 files changed, 364 insertions(+), 7 deletions(-) create mode 100644 arch/arm/mach-omap2/powerdomains34xx.h (limited to 'arch') diff --git a/arch/arm/mach-omap2/powerdomains.h b/arch/arm/mach-omap2/powerdomains.h index 325e2ba0406..1e151faebbd 100644 --- a/arch/arm/mach-omap2/powerdomains.h +++ b/arch/arm/mach-omap2/powerdomains.h @@ -98,16 +98,28 @@ static struct pwrdm_dep gfx_sgx_wkdeps[] = { { NULL }, }; +/* + * 3430: CM_SLEEPDEP_CAM: MPU + * 3430ES1: CM_SLEEPDEP_GFX: MPU + * 3430ES2: CM_SLEEPDEP_SGX: MPU + */ +static struct pwrdm_dep cam_gfx_sleepdeps[] = { + { + .pwrdm_name = "mpu_pwrdm", + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430) + }, + { NULL }, +}; + #include "powerdomains24xx.h" +#include "powerdomains34xx.h" /* * OMAP2/3 common powerdomains */ -/* XXX add sleepdeps for this powerdomain : 3430 */ - /* * The GFX powerdomain is not present on 3430ES2, but currently we do not * have a macro to filter it out at compile-time. @@ -118,6 +130,7 @@ static struct powerdomain gfx_pwrdm = { .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX | CHIP_IS_OMAP3430ES1), .wkdep_srcs = gfx_sgx_wkdeps, + .sleepdep_srcs = cam_gfx_sleepdeps, .pwrsts = PWRSTS_OFF_RET_ON, .pwrsts_logic_ret = PWRDM_POWER_RET, .banks = 1, @@ -154,6 +167,19 @@ static struct powerdomain *powerdomains_omap[] __initdata = { &mdm_pwrdm, #endif +#ifdef CONFIG_ARCH_OMAP34XX + &iva2_pwrdm, + &mpu_34xx_pwrdm, + &neon_pwrdm, + &core_34xx_pwrdm, + &cam_pwrdm, + &dss_pwrdm, + &per_pwrdm, + &emu_pwrdm, + &sgx_pwrdm, + &usbhost_pwrdm, +#endif + NULL }; diff --git a/arch/arm/mach-omap2/powerdomains34xx.h b/arch/arm/mach-omap2/powerdomains34xx.h new file mode 100644 index 00000000000..f573f710839 --- /dev/null +++ b/arch/arm/mach-omap2/powerdomains34xx.h @@ -0,0 +1,327 @@ +/* + * OMAP34XX powerdomain definitions + * + * Copyright (C) 2007-2008 Texas Instruments, Inc. + * Copyright (C) 2007-2008 Nokia Corporation + * + * Written by Paul Walmsley + * Debugging and integration fixes by Jouni Högander + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef ARCH_ARM_MACH_OMAP2_POWERDOMAINS34XX +#define ARCH_ARM_MACH_OMAP2_POWERDOMAINS34XX + +/* + * N.B. If powerdomains are added or removed from this file, update + * the array in mach-omap2/powerdomains.h. + */ + +#include + +#include "prcm-common.h" +#include "prm.h" +#include "prm-regbits-34xx.h" +#include "cm.h" +#include "cm-regbits-34xx.h" + +/* + * 34XX-specific powerdomains, dependencies + */ + +#ifdef CONFIG_ARCH_OMAP34XX + +/* + * 3430: PM_WKDEP_{PER,USBHOST}: CORE, IVA2, MPU, WKUP + * (USBHOST is ES2 only) + */ +static struct pwrdm_dep per_usbhost_wkdeps[] = { + { + .pwrdm_name = "core_pwrdm", + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430) + }, + { + .pwrdm_name = "iva2_pwrdm", + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430) + }, + { + .pwrdm_name = "mpu_pwrdm", + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430) + }, + { + .pwrdm_name = "wkup_pwrdm", + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430) + }, + { NULL }, +}; + +/* + * 3430 PM_WKDEP_MPU: CORE, IVA2, DSS, PER + */ +static struct pwrdm_dep mpu_34xx_wkdeps[] = { + { + .pwrdm_name = "core_pwrdm", + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430) + }, + { + .pwrdm_name = "iva2_pwrdm", + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430) + }, + { + .pwrdm_name = "dss_pwrdm", + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430) + }, + { + .pwrdm_name = "per_pwrdm", + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430) + }, + { NULL }, +}; + +/* + * 3430 PM_WKDEP_IVA2: CORE, MPU, WKUP, DSS, PER + */ +static struct pwrdm_dep iva2_wkdeps[] = { + { + .pwrdm_name = "core_pwrdm", + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430) + }, + { + .pwrdm_name = "mpu_pwrdm", + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430) + }, + { + .pwrdm_name = "wkup_pwrdm", + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430) + }, + { + .pwrdm_name = "dss_pwrdm", + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430) + }, + { + .pwrdm_name = "per_pwrdm", + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430) + }, + { NULL }, +}; + + +/* 3430 PM_WKDEP_{CAM,DSS}: IVA2, MPU, WKUP */ +static struct pwrdm_dep cam_dss_wkdeps[] = { + { + .pwrdm_name = "iva2_pwrdm", + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430) + }, + { + .pwrdm_name = "mpu_pwrdm", + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430) + }, + { + .pwrdm_name = "wkup_pwrdm", + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430) + }, + { NULL }, +}; + +/* 3430: PM_WKDEP_NEON: MPU */ +static struct pwrdm_dep neon_wkdeps[] = { + { + .pwrdm_name = "mpu_pwrdm", + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430) + }, + { NULL }, +}; + + +/* Sleep dependency source arrays for 34xx-specific pwrdms - 34XX only */ + +/* + * 3430: CM_SLEEPDEP_{DSS,PER}: MPU, IVA + * 3430ES2: CM_SLEEPDEP_USBHOST: MPU, IVA + */ +static struct pwrdm_dep dss_per_usbhost_sleepdeps[] = { + { + .pwrdm_name = "mpu_pwrdm", + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430) + }, + { + .pwrdm_name = "iva2_pwrdm", + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430) + }, + { NULL }, +}; + + +/* + * Powerdomains + */ + +static struct powerdomain iva2_pwrdm = { + .name = "iva2_pwrdm", + .prcm_offs = OMAP3430_IVA2_MOD, + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430), + .dep_bit = OMAP3430_PM_WKDEP_MPU_EN_IVA2_SHIFT, + .wkdep_srcs = iva2_wkdeps, + .pwrsts = PWRSTS_OFF_RET_ON, + .pwrsts_logic_ret = PWRSTS_OFF_RET, + .banks = 4, + .pwrsts_mem_ret = { + [0] = PWRSTS_OFF_RET, + [1] = PWRSTS_OFF_RET, + [2] = PWRSTS_OFF_RET, + [3] = PWRSTS_OFF_RET, + }, + .pwrsts_mem_on = { + [0] = PWRDM_POWER_ON, + [1] = PWRDM_POWER_ON, + [2] = PWRSTS_OFF_ON, + [3] = PWRDM_POWER_ON, + }, +}; + +static struct powerdomain mpu_34xx_pwrdm = { + .name = "mpu_pwrdm", + .prcm_offs = MPU_MOD, + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430), + .dep_bit = OMAP3430_EN_MPU_SHIFT, + .wkdep_srcs = mpu_34xx_wkdeps, + .pwrsts = PWRSTS_OFF_RET_ON, + .pwrsts_logic_ret = PWRSTS_OFF_RET, + .banks = 1, + .pwrsts_mem_ret = { + [0] = PWRSTS_OFF_RET, + }, + .pwrsts_mem_on = { + [0] = PWRSTS_OFF_ON, + }, +}; + +/* No wkdeps or sleepdeps for 34xx core apparently */ +static struct powerdomain core_34xx_pwrdm = { + .name = "core_pwrdm", + .prcm_offs = CORE_MOD, + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430), + .pwrsts = PWRSTS_OFF_RET_ON, + .dep_bit = OMAP3430_EN_CORE_SHIFT, + .banks = 2, + .pwrsts_mem_ret = { + [0] = PWRSTS_OFF_RET, /* MEM1RETSTATE */ + [1] = PWRSTS_OFF_RET, /* MEM2RETSTATE */ + }, + .pwrsts_mem_on = { + [0] = PWRSTS_OFF_RET_ON, /* MEM1ONSTATE */ + [1] = PWRSTS_OFF_RET_ON, /* MEM2ONSTATE */ + }, +}; + +/* Another case of bit name collisions between several registers: EN_DSS */ +static struct powerdomain dss_pwrdm = { + .name = "dss_pwrdm", + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430), + .prcm_offs = OMAP3430_DSS_MOD, + .dep_bit = OMAP3430_PM_WKDEP_MPU_EN_DSS_SHIFT, + .wkdep_srcs = cam_dss_wkdeps, + .sleepdep_srcs = dss_per_usbhost_sleepdeps, + .pwrsts = PWRSTS_OFF_RET_ON, + .pwrsts_logic_ret = PWRDM_POWER_RET, + .banks = 1, + .pwrsts_mem_ret = { + [0] = PWRDM_POWER_RET, /* MEMRETSTATE */ + }, + .pwrsts_mem_on = { + [0] = PWRDM_POWER_ON, /* MEMONSTATE */ + }, +}; + +static struct powerdomain sgx_pwrdm = { + .name = "sgx_pwrdm", + .prcm_offs = OMAP3430ES2_SGX_MOD, + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430ES2), + .wkdep_srcs = gfx_sgx_wkdeps, + .sleepdep_srcs = cam_gfx_sleepdeps, + /* XXX This is accurate for 3430 SGX, but what about GFX? */ + .pwrsts = PWRSTS_OFF_RET_ON, + .pwrsts_logic_ret = PWRDM_POWER_RET, + .banks = 1, + .pwrsts_mem_ret = { + [0] = PWRDM_POWER_RET, /* MEMRETSTATE */ + }, + .pwrsts_mem_on = { + [0] = PWRDM_POWER_ON, /* MEMONSTATE */ + }, +}; + +static struct powerdomain cam_pwrdm = { + .name = "cam_pwrdm", + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430), + .prcm_offs = OMAP3430_CAM_MOD, + .wkdep_srcs = cam_dss_wkdeps, + .sleepdep_srcs = cam_gfx_sleepdeps, + .pwrsts = PWRSTS_OFF_RET_ON, + .pwrsts_logic_ret = PWRDM_POWER_RET, + .banks = 1, + .pwrsts_mem_ret = { + [0] = PWRDM_POWER_RET, /* MEMRETSTATE */ + }, + .pwrsts_mem_on = { + [0] = PWRDM_POWER_ON, /* MEMONSTATE */ + }, +}; + +static struct powerdomain per_pwrdm = { + .name = "per_pwrdm", + .prcm_offs = OMAP3430_PER_MOD, + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430), + .dep_bit = OMAP3430_EN_PER_SHIFT, + .wkdep_srcs = per_usbhost_wkdeps, + .sleepdep_srcs = dss_per_usbhost_sleepdeps, + .pwrsts = PWRSTS_OFF_RET_ON, + .pwrsts_logic_ret = PWRSTS_OFF_RET, + .banks = 1, + .pwrsts_mem_ret = { + [0] = PWRDM_POWER_RET, /* MEMRETSTATE */ + }, + .pwrsts_mem_on = { + [0] = PWRDM_POWER_ON, /* MEMONSTATE */ + }, +}; + +static struct powerdomain emu_pwrdm = { + .name = "emu_pwrdm", + .prcm_offs = OMAP3430_EMU_MOD, + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430), +}; + +static struct powerdomain neon_pwrdm = { + .name = "neon_pwrdm", + .prcm_offs = OMAP3430_NEON_MOD, + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430), + .wkdep_srcs = neon_wkdeps, + .pwrsts = PWRSTS_OFF_RET_ON, + .pwrsts_logic_ret = PWRDM_POWER_RET, +}; + +static struct powerdomain usbhost_pwrdm = { + .name = "usbhost_pwrdm", + .prcm_offs = OMAP3430ES2_USBHOST_MOD, + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430ES2), + .wkdep_srcs = per_usbhost_wkdeps, + .sleepdep_srcs = dss_per_usbhost_sleepdeps, + .pwrsts = PWRSTS_OFF_RET_ON, + .pwrsts_logic_ret = PWRDM_POWER_RET, + .banks = 1, + .pwrsts_mem_ret = { + [0] = PWRDM_POWER_RET, /* MEMRETSTATE */ + }, + .pwrsts_mem_on = { + [0] = PWRDM_POWER_ON, /* MEMONSTATE */ + }, +}; + +#endif /* CONFIG_ARCH_OMAP34XX */ + + +#endif diff --git a/arch/arm/mach-omap2/prcm-common.h b/arch/arm/mach-omap2/prcm-common.h index 54c32f48213..4a32822ff3f 100644 --- a/arch/arm/mach-omap2/prcm-common.h +++ b/arch/arm/mach-omap2/prcm-common.h @@ -312,7 +312,8 @@ #define OMAP3430_ST_GPT2 (1 << 3) /* CM_SLEEPDEP_PER, PM_WKDEP_IVA2, PM_WKDEP_MPU, PM_WKDEP_PER shared bits */ -#define OMAP3430_EN_CORE (1 << 0) +#define OMAP3430_EN_CORE_SHIFT 0 +#define OMAP3430_EN_CORE_MASK (1 << 0) #endif diff --git a/arch/arm/mach-omap2/prm-regbits-34xx.h b/arch/arm/mach-omap2/prm-regbits-34xx.h index b4686bc345c..5b5ecfe6c99 100644 --- a/arch/arm/mach-omap2/prm-regbits-34xx.h +++ b/arch/arm/mach-omap2/prm-regbits-34xx.h @@ -68,7 +68,8 @@ #define OMAP3430_VPINIDLE (1 << 0) /* PM_WKDEP_IVA2, PM_WKDEP_MPU shared bits */ -#define OMAP3430_EN_PER (1 << 7) +#define OMAP3430_EN_PER_SHIFT 7 +#define OMAP3430_EN_PER_MASK (1 << 7) /* PM_PWSTCTRL_IVA2, PM_PWSTCTRL_MPU, PM_PWSTCTRL_CORE shared bits */ #define OMAP3430_MEMORYCHANGE (1 << 3) @@ -77,7 +78,7 @@ #define OMAP3430_LOGICSTATEST (1 << 2) /* PM_PREPWSTST_IVA2, PM_PREPWSTST_CORE shared bits */ -#define OMAP3430_LASTLOGICSTATEENTERED (1 << 2) +#define OMAP3430_LASTLOGICSTATEENTERED (1 << 2) /* * PM_PREPWSTST_IVA2, PM_PREPWSTST_MPU, PM_PREPWSTST_CORE, @@ -278,8 +279,10 @@ #define OMAP3430_EMULATION_MPU_RST (1 << 11) /* PM_WKDEP_MPU specific bits */ -#define OMAP3430_PM_WKDEP_MPU_EN_DSS (1 << 5) -#define OMAP3430_PM_WKDEP_MPU_EN_IVA2 (1 << 2) +#define OMAP3430_PM_WKDEP_MPU_EN_DSS_SHIFT 5 +#define OMAP3430_PM_WKDEP_MPU_EN_DSS_MASK (1 << 5) +#define OMAP3430_PM_WKDEP_MPU_EN_IVA2_SHIFT 2 +#define OMAP3430_PM_WKDEP_MPU_EN_IVA2_MASK (1 << 2) /* PM_EVGENCTRL_MPU */ #define OMAP3430_OFFLOADMODE_SHIFT 3 -- cgit v1.2.3-70-g09d2 From d459bfe01f523983a822de8c2d3fe0bd2f2c194e Mon Sep 17 00:00:00 2001 From: Paul Walmsley Date: Tue, 19 Aug 2008 11:08:43 +0300 Subject: ARM: OMAP2: Clockdomain: Add base OMAP2/3 clockdomain code This patch creates an interface to the clockdomain registers in the PRM/CM modules on OMAP2/3. This interface is intended to be used by PM code, e.g., pm.c; not by device drivers directly. The patch also adds clockdomain usecount tracking. This is intended to be called whenever the first clock in a clockdomain is enabled, or when the last enabled clock in a clockdomain is disabled. If the clockdomain is in software-supervised mode, the code will force-wakeup or force-sleep the clockdomain. If the clockdomain is in hardware-supervised mode, the first clock enable will add sleep and wakeup dependencies on a user-selectable set of parent domains (usually MPU & IVA2), and the disable will remove them. Each clockdomain will be defined in later patches as static structures. The clockdomain structures are linked into a list at boot by clkdm_register(), similar to the OMAP clock code. The patch adds a Kconfig option, CONFIG_OMAP_DEBUG_CLOCKDOMAIN, which when enabled will emit verbose debug messages via pr_debug(). Signed-off-by: Paul Walmsley Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/Makefile | 3 +- arch/arm/mach-omap2/clockdomain.c | 603 ++++++++++++++++++++++++++ arch/arm/plat-omap/Kconfig | 12 + arch/arm/plat-omap/include/mach/clockdomain.h | 106 +++++ 4 files changed, 723 insertions(+), 1 deletion(-) create mode 100644 arch/arm/mach-omap2/clockdomain.c create mode 100644 arch/arm/plat-omap/include/mach/clockdomain.h (limited to 'arch') diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index 1001d42048e..e7cf1b4357c 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -4,7 +4,8 @@ # Common support obj-y := irq.o id.o io.o memory.o control.o prcm.o clock.o mux.o \ - devices.o serial.o gpmc.o timer-gp.o powerdomain.o + devices.o serial.o gpmc.o timer-gp.o powerdomain.o \ + clockdomain.o obj-$(CONFIG_OMAP_MCBSP) += mcbsp.o diff --git a/arch/arm/mach-omap2/clockdomain.c b/arch/arm/mach-omap2/clockdomain.c new file mode 100644 index 00000000000..f867d8f1d0e --- /dev/null +++ b/arch/arm/mach-omap2/clockdomain.c @@ -0,0 +1,603 @@ +/* + * OMAP2/3 clockdomain framework functions + * + * Copyright (C) 2008 Texas Instruments, Inc. + * Copyright (C) 2008 Nokia Corporation + * + * Written by Paul Walmsley and Jouni Högander + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifdef CONFIG_OMAP_DEBUG_CLOCKDOMAIN +# define DEBUG +#endif + +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +#include + +#include + +#include "prm.h" +#include "prm-regbits-24xx.h" +#include "cm.h" + +#include +#include + +/* clkdm_list contains all registered struct clockdomains */ +static LIST_HEAD(clkdm_list); + +/* clkdm_mutex protects clkdm_list add and del ops */ +static DEFINE_MUTEX(clkdm_mutex); + +/* array of powerdomain deps to be added/removed when clkdm in hwsup mode */ +static struct clkdm_pwrdm_autodep *autodeps; + + +/* Private functions */ + +/* + * _autodep_lookup - resolve autodep pwrdm names to pwrdm pointers; store + * @autodep: struct clkdm_pwrdm_autodep * to resolve + * + * Resolve autodep powerdomain names to powerdomain pointers via + * pwrdm_lookup() and store the pointers in the autodep structure. An + * "autodep" is a powerdomain sleep/wakeup dependency that is + * automatically added and removed whenever clocks in the associated + * clockdomain are enabled or disabled (respectively) when the + * clockdomain is in hardware-supervised mode. Meant to be called + * once at clockdomain layer initialization, since these should remain + * fixed for a particular architecture. No return value. + */ +static void _autodep_lookup(struct clkdm_pwrdm_autodep *autodep) +{ + struct powerdomain *pwrdm; + + if (!autodep) + return; + + if (!omap_chip_is(autodep->omap_chip)) + return; + + pwrdm = pwrdm_lookup(autodep->pwrdm_name); + if (!pwrdm) { + pr_debug("clockdomain: _autodep_lookup: powerdomain %s " + "does not exist\n", autodep->pwrdm_name); + WARN_ON(1); + return; + } + autodep->pwrdm = pwrdm; + + return; +} + +/* + * _clkdm_add_autodeps - add auto sleepdeps/wkdeps to clkdm upon clock enable + * @clkdm: struct clockdomain * + * + * Add the "autodep" sleep & wakeup dependencies to clockdomain 'clkdm' + * in hardware-supervised mode. Meant to be called from clock framework + * when a clock inside clockdomain 'clkdm' is enabled. No return value. + */ +static void _clkdm_add_autodeps(struct clockdomain *clkdm) +{ + struct clkdm_pwrdm_autodep *autodep; + + for (autodep = autodeps; autodep->pwrdm_name; autodep++) { + if (!autodep->pwrdm) + continue; + + pr_debug("clockdomain: adding %s sleepdep/wkdep for " + "pwrdm %s\n", autodep->pwrdm_name, + clkdm->pwrdm->name); + + pwrdm_add_sleepdep(clkdm->pwrdm, autodep->pwrdm); + pwrdm_add_wkdep(clkdm->pwrdm, autodep->pwrdm); + } +} + +/* + * _clkdm_add_autodeps - remove auto sleepdeps/wkdeps from clkdm + * @clkdm: struct clockdomain * + * + * Remove the "autodep" sleep & wakeup dependencies from clockdomain 'clkdm' + * in hardware-supervised mode. Meant to be called from clock framework + * when a clock inside clockdomain 'clkdm' is disabled. No return value. + */ +static void _clkdm_del_autodeps(struct clockdomain *clkdm) +{ + struct clkdm_pwrdm_autodep *autodep; + + for (autodep = autodeps; autodep->pwrdm_name; autodep++) { + if (!autodep->pwrdm) + continue; + + pr_debug("clockdomain: removing %s sleepdep/wkdep for " + "pwrdm %s\n", autodep->pwrdm_name, + clkdm->pwrdm->name); + + pwrdm_del_sleepdep(clkdm->pwrdm, autodep->pwrdm); + pwrdm_del_wkdep(clkdm->pwrdm, autodep->pwrdm); + } +} + + +static struct clockdomain *_clkdm_lookup(const char *name) +{ + struct clockdomain *clkdm, *temp_clkdm; + + if (!name) + return NULL; + + clkdm = NULL; + + list_for_each_entry(temp_clkdm, &clkdm_list, node) { + if (!strcmp(name, temp_clkdm->name)) { + clkdm = temp_clkdm; + break; + } + } + + return clkdm; +} + + +/* Public functions */ + +/** + * clkdm_init - set up the clockdomain layer + * @clkdms: optional pointer to an array of clockdomains to register + * @init_autodeps: optional pointer to an array of autodeps to register + * + * Set up internal state. If a pointer to an array of clockdomains + * was supplied, loop through the list of clockdomains, register all + * that are available on the current platform. Similarly, if a + * pointer to an array of clockdomain-powerdomain autodependencies was + * provided, register those. No return value. + */ +void clkdm_init(struct clockdomain **clkdms, + struct clkdm_pwrdm_autodep *init_autodeps) +{ + struct clockdomain **c = NULL; + struct clkdm_pwrdm_autodep *autodep = NULL; + + if (clkdms) + for (c = clkdms; *c; c++) + clkdm_register(*c); + + autodeps = init_autodeps; + if (autodeps) + for (autodep = autodeps; autodep->pwrdm_name; autodep++) + _autodep_lookup(autodep); +} + +/** + * clkdm_register - register a clockdomain + * @clkdm: struct clockdomain * to register + * + * Adds a clockdomain to the internal clockdomain list. + * Returns -EINVAL if given a null pointer, -EEXIST if a clockdomain is + * already registered by the provided name, or 0 upon success. + */ +int clkdm_register(struct clockdomain *clkdm) +{ + int ret = -EINVAL; + struct powerdomain *pwrdm; + + if (!clkdm || !clkdm->name) + return -EINVAL; + + if (!omap_chip_is(clkdm->omap_chip)) + return -EINVAL; + + pwrdm = pwrdm_lookup(clkdm->pwrdm_name); + if (!pwrdm) { + pr_debug("clockdomain: clkdm_register %s: powerdomain %s " + "does not exist\n", clkdm->name, clkdm->pwrdm_name); + return -EINVAL; + } + clkdm->pwrdm = pwrdm; + + mutex_lock(&clkdm_mutex); + /* Verify that the clockdomain is not already registered */ + if (_clkdm_lookup(clkdm->name)) { + ret = -EEXIST; + goto cr_unlock; + }; + + list_add(&clkdm->node, &clkdm_list); + + pr_debug("clockdomain: registered %s\n", clkdm->name); + ret = 0; + +cr_unlock: + mutex_unlock(&clkdm_mutex); + + return ret; +} + +/** + * clkdm_unregister - unregister a clockdomain + * @clkdm: struct clockdomain * to unregister + * + * Removes a clockdomain from the internal clockdomain list. Returns + * -EINVAL if clkdm argument is NULL. + */ +int clkdm_unregister(struct clockdomain *clkdm) +{ + if (!clkdm) + return -EINVAL; + + mutex_lock(&clkdm_mutex); + list_del(&clkdm->node); + mutex_unlock(&clkdm_mutex); + + pr_debug("clockdomain: unregistered %s\n", clkdm->name); + + return 0; +} + +/** + * clkdm_lookup - look up a clockdomain by name, return a pointer + * @name: name of clockdomain + * + * Find a registered clockdomain by its name. Returns a pointer to the + * struct clockdomain if found, or NULL otherwise. + */ +struct clockdomain *clkdm_lookup(const char *name) +{ + struct clockdomain *clkdm, *temp_clkdm; + + if (!name) + return NULL; + + clkdm = NULL; + + mutex_lock(&clkdm_mutex); + list_for_each_entry(temp_clkdm, &clkdm_list, node) { + if (!strcmp(name, temp_clkdm->name)) { + clkdm = temp_clkdm; + break; + } + } + mutex_unlock(&clkdm_mutex); + + return clkdm; +} + +/** + * clkdm_for_each - call function on each registered clockdomain + * @fn: callback function * + * + * Call the supplied function for each registered clockdomain. + * The callback function can return anything but 0 to bail + * out early from the iterator. The callback function is called with + * the clkdm_mutex held, so no clockdomain structure manipulation + * functions should be called from the callback, although hardware + * clockdomain control functions are fine. Returns the last return + * value of the callback function, which should be 0 for success or + * anything else to indicate failure; or -EINVAL if the function pointer + * is null. + */ +int clkdm_for_each(int (*fn)(struct clockdomain *clkdm)) +{ + struct clockdomain *clkdm; + int ret = 0; + + if (!fn) + return -EINVAL; + + mutex_lock(&clkdm_mutex); + list_for_each_entry(clkdm, &clkdm_list, node) { + ret = (*fn)(clkdm); + if (ret) + break; + } + mutex_unlock(&clkdm_mutex); + + return ret; +} + + +/* Hardware clockdomain control */ + +/** + * omap2_clkdm_clktrctrl_read - read the clkdm's current state transition mode + * @clk: struct clk * of a clockdomain + * + * Return the clockdomain's current state transition mode from the + * corresponding domain CM_CLKSTCTRL register. Returns -EINVAL if clk + * is NULL or the current mode upon success. + */ +static int omap2_clkdm_clktrctrl_read(struct clockdomain *clkdm) +{ + u32 v; + + if (!clkdm) + return -EINVAL; + + v = cm_read_mod_reg(clkdm->pwrdm->prcm_offs, CM_CLKSTCTRL); + v &= clkdm->clktrctrl_mask; + v >>= __ffs(clkdm->clktrctrl_mask); + + return v; +} + +/** + * omap2_clkdm_sleep - force clockdomain sleep transition + * @clkdm: struct clockdomain * + * + * Instruct the CM to force a sleep transition on the specified + * clockdomain 'clkdm'. Returns -EINVAL if clk is NULL or if + * clockdomain does not support software-initiated sleep; 0 upon + * success. + */ +int omap2_clkdm_sleep(struct clockdomain *clkdm) +{ + if (!clkdm) + return -EINVAL; + + if (!(clkdm->flags & CLKDM_CAN_FORCE_SLEEP)) { + pr_debug("clockdomain: %s does not support forcing " + "sleep via software\n", clkdm->name); + return -EINVAL; + } + + pr_debug("clockdomain: forcing sleep on %s\n", clkdm->name); + + if (cpu_is_omap24xx()) { + + cm_set_mod_reg_bits(OMAP24XX_FORCESTATE, + clkdm->pwrdm->prcm_offs, PM_PWSTCTRL); + + } else if (cpu_is_omap34xx()) { + + u32 v = (OMAP34XX_CLKSTCTRL_FORCE_SLEEP << + __ffs(clkdm->clktrctrl_mask)); + + cm_rmw_mod_reg_bits(clkdm->clktrctrl_mask, v, + clkdm->pwrdm->prcm_offs, CM_CLKSTCTRL); + + } else { + BUG(); + }; + + return 0; +} + +/** + * omap2_clkdm_wakeup - force clockdomain wakeup transition + * @clkdm: struct clockdomain * + * + * Instruct the CM to force a wakeup transition on the specified + * clockdomain 'clkdm'. Returns -EINVAL if clkdm is NULL or if the + * clockdomain does not support software-controlled wakeup; 0 upon + * success. + */ +int omap2_clkdm_wakeup(struct clockdomain *clkdm) +{ + if (!clkdm) + return -EINVAL; + + if (!(clkdm->flags & CLKDM_CAN_FORCE_WAKEUP)) { + pr_debug("clockdomain: %s does not support forcing " + "wakeup via software\n", clkdm->name); + return -EINVAL; + } + + pr_debug("clockdomain: forcing wakeup on %s\n", clkdm->name); + + if (cpu_is_omap24xx()) { + + cm_clear_mod_reg_bits(OMAP24XX_FORCESTATE, + clkdm->pwrdm->prcm_offs, PM_PWSTCTRL); + + } else if (cpu_is_omap34xx()) { + + u32 v = (OMAP34XX_CLKSTCTRL_FORCE_WAKEUP << + __ffs(clkdm->clktrctrl_mask)); + + cm_rmw_mod_reg_bits(clkdm->clktrctrl_mask, v, + clkdm->pwrdm->prcm_offs, CM_CLKSTCTRL); + + } else { + BUG(); + }; + + return 0; +} + +/** + * omap2_clkdm_allow_idle - enable hwsup idle transitions for clkdm + * @clkdm: struct clockdomain * + * + * Allow the hardware to automatically switch the clockdomain into + * active or idle states, as needed by downstream clocks. If the + * clockdomain has any downstream clocks enabled in the clock + * framework, wkdep/sleepdep autodependencies are added; this is so + * device drivers can read and write to the device. No return value. + */ +void omap2_clkdm_allow_idle(struct clockdomain *clkdm) +{ + u32 v; + + if (!clkdm) + return; + + if (!(clkdm->flags & CLKDM_CAN_ENABLE_AUTO)) { + pr_debug("clock: automatic idle transitions cannot be enabled " + "on clockdomain %s\n", clkdm->name); + return; + } + + pr_debug("clockdomain: enabling automatic idle transitions for %s\n", + clkdm->name); + + if (atomic_read(&clkdm->usecount) > 0) + _clkdm_add_autodeps(clkdm); + + if (cpu_is_omap24xx()) + v = OMAP24XX_CLKSTCTRL_ENABLE_AUTO; + else if (cpu_is_omap34xx()) + v = OMAP34XX_CLKSTCTRL_ENABLE_AUTO; + else + BUG(); + + + cm_rmw_mod_reg_bits(clkdm->clktrctrl_mask, + v << __ffs(clkdm->clktrctrl_mask), + clkdm->pwrdm->prcm_offs, + CM_CLKSTCTRL); +} + +/** + * omap2_clkdm_deny_idle - disable hwsup idle transitions for clkdm + * @clkdm: struct clockdomain * + * + * Prevent the hardware from automatically switching the clockdomain + * into inactive or idle states. If the clockdomain has downstream + * clocks enabled in the clock framework, wkdep/sleepdep + * autodependencies are removed. No return value. + */ +void omap2_clkdm_deny_idle(struct clockdomain *clkdm) +{ + u32 v; + + if (!clkdm) + return; + + if (!(clkdm->flags & CLKDM_CAN_DISABLE_AUTO)) { + pr_debug("clockdomain: automatic idle transitions cannot be " + "disabled on %s\n", clkdm->name); + return; + } + + pr_debug("clockdomain: disabling automatic idle transitions for %s\n", + clkdm->name); + + if (cpu_is_omap24xx()) + v = OMAP24XX_CLKSTCTRL_DISABLE_AUTO; + else if (cpu_is_omap34xx()) + v = OMAP34XX_CLKSTCTRL_DISABLE_AUTO; + else + BUG(); + + cm_rmw_mod_reg_bits(clkdm->clktrctrl_mask, + v << __ffs(clkdm->clktrctrl_mask), + clkdm->pwrdm->prcm_offs, CM_CLKSTCTRL); + + if (atomic_read(&clkdm->usecount) > 0) + _clkdm_del_autodeps(clkdm); +} + + +/* Clockdomain-to-clock framework interface code */ + +/** + * omap2_clkdm_clk_enable - add an enabled downstream clock to this clkdm + * @clkdm: struct clockdomain * + * @clk: struct clk * of the enabled downstream clock + * + * Increment the usecount of this clockdomain 'clkdm' and ensure that + * it is awake. Intended to be called by clk_enable() code. If the + * clockdomain is in software-supervised idle mode, force the + * clockdomain to wake. If the clockdomain is in hardware-supervised + * idle mode, add clkdm-pwrdm autodependencies, to ensure that devices + * in the clockdomain can be read from/written to by on-chip processors. + * Returns -EINVAL if passed null pointers; returns 0 upon success or + * if the clockdomain is in hwsup idle mode. + */ +int omap2_clkdm_clk_enable(struct clockdomain *clkdm, struct clk *clk) +{ + int v; + + /* + * XXX Rewrite this code to maintain a list of enabled + * downstream clocks for debugging purposes? + */ + + if (!clkdm || !clk) + return -EINVAL; + + if (atomic_inc_return(&clkdm->usecount) > 1) + return 0; + + /* Clockdomain now has one enabled downstream clock */ + + pr_debug("clockdomain: clkdm %s: clk %s now enabled\n", clkdm->name, + clk->name); + + v = omap2_clkdm_clktrctrl_read(clkdm); + + if ((cpu_is_omap34xx() && v == OMAP34XX_CLKSTCTRL_ENABLE_AUTO) || + (cpu_is_omap24xx() && v == OMAP24XX_CLKSTCTRL_ENABLE_AUTO)) + _clkdm_add_autodeps(clkdm); + else + omap2_clkdm_wakeup(clkdm); + + return 0; +} + +/** + * omap2_clkdm_clk_disable - remove an enabled downstream clock from this clkdm + * @clkdm: struct clockdomain * + * @clk: struct clk * of the disabled downstream clock + * + * Decrement the usecount of this clockdomain 'clkdm'. Intended to be + * called by clk_disable() code. If the usecount goes to 0, put the + * clockdomain to sleep (software-supervised mode) or remove the + * clkdm-pwrdm autodependencies (hardware-supervised mode). Returns + * -EINVAL if passed null pointers; -ERANGE if the clkdm usecount + * underflows and debugging is enabled; or returns 0 upon success or + * if the clockdomain is in hwsup idle mode. + */ +int omap2_clkdm_clk_disable(struct clockdomain *clkdm, struct clk *clk) +{ + int v; + + /* + * XXX Rewrite this code to maintain a list of enabled + * downstream clocks for debugging purposes? + */ + + if (!clkdm || !clk) + return -EINVAL; + +#ifdef DEBUG + if (atomic_read(&clkdm->usecount) == 0) { + WARN_ON(1); /* underflow */ + return -ERANGE; + } +#endif + + if (atomic_dec_return(&clkdm->usecount) > 0) + return 0; + + /* All downstream clocks of this clockdomain are now disabled */ + + pr_debug("clockdomain: clkdm %s: clk %s now disabled\n", clkdm->name, + clk->name); + + v = omap2_clkdm_clktrctrl_read(clkdm); + + if ((cpu_is_omap34xx() && v == OMAP34XX_CLKSTCTRL_ENABLE_AUTO) || + (cpu_is_omap24xx() && v == OMAP24XX_CLKSTCTRL_ENABLE_AUTO)) + _clkdm_del_autodeps(clkdm); + else + omap2_clkdm_sleep(clkdm); + + return 0; +} + diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig index e815fa35f7f..ef62bf21e17 100644 --- a/arch/arm/plat-omap/Kconfig +++ b/arch/arm/plat-omap/Kconfig @@ -41,6 +41,18 @@ config OMAP_DEBUG_POWERDOMAIN for every powerdomain register write. However, the extra detail costs some memory. +config OMAP_DEBUG_CLOCKDOMAIN + bool "Emit debug messages from clockdomain layer" + depends on ARCH_OMAP2 || ARCH_OMAP3 + default n + help + Say Y here if you want to compile in clockdomain layer + debugging messages for OMAP2/3. These messages can + provide more detail as to why some clockdomain calls + may be failing, and will also emit a descriptive message + for every clockdomain register write. However, the + extra detail costs some memory. + config OMAP_RESET_CLOCKS bool "Reset unused clocks during boot" depends on ARCH_OMAP diff --git a/arch/arm/plat-omap/include/mach/clockdomain.h b/arch/arm/plat-omap/include/mach/clockdomain.h new file mode 100644 index 00000000000..1f51f017378 --- /dev/null +++ b/arch/arm/plat-omap/include/mach/clockdomain.h @@ -0,0 +1,106 @@ +/* + * linux/include/asm-arm/arch-omap/clockdomain.h + * + * OMAP2/3 clockdomain framework functions + * + * Copyright (C) 2008 Texas Instruments, Inc. + * Copyright (C) 2008 Nokia Corporation + * + * Written by Paul Walmsley + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ASM_ARM_ARCH_OMAP_CLOCKDOMAIN_H +#define __ASM_ARM_ARCH_OMAP_CLOCKDOMAIN_H + +#include +#include +#include + +/* Clockdomain capability flags */ +#define CLKDM_CAN_FORCE_SLEEP (1 << 0) +#define CLKDM_CAN_FORCE_WAKEUP (1 << 1) +#define CLKDM_CAN_ENABLE_AUTO (1 << 2) +#define CLKDM_CAN_DISABLE_AUTO (1 << 3) + +#define CLKDM_CAN_HWSUP (CLKDM_CAN_ENABLE_AUTO | CLKDM_CAN_DISABLE_AUTO) +#define CLKDM_CAN_SWSUP (CLKDM_CAN_FORCE_SLEEP | CLKDM_CAN_FORCE_WAKEUP) +#define CLKDM_CAN_HWSUP_SWSUP (CLKDM_CAN_SWSUP | CLKDM_CAN_HWSUP) + +/* OMAP24XX CM_CLKSTCTRL_*.AUTOSTATE_* register bit values */ +#define OMAP24XX_CLKSTCTRL_DISABLE_AUTO 0x0 +#define OMAP24XX_CLKSTCTRL_ENABLE_AUTO 0x1 + +/* OMAP3XXX CM_CLKSTCTRL_*.CLKTRCTRL_* register bit values */ +#define OMAP34XX_CLKSTCTRL_DISABLE_AUTO 0x0 +#define OMAP34XX_CLKSTCTRL_FORCE_SLEEP 0x1 +#define OMAP34XX_CLKSTCTRL_FORCE_WAKEUP 0x2 +#define OMAP34XX_CLKSTCTRL_ENABLE_AUTO 0x3 + +/* + * struct clkdm_pwrdm_autodep - a powerdomain that should have wkdeps + * and sleepdeps added when a powerdomain should stay active in hwsup mode; + * and conversely, removed when the powerdomain should be allowed to go + * inactive in hwsup mode. + */ +struct clkdm_pwrdm_autodep { + + /* Name of the powerdomain to add a wkdep/sleepdep on */ + const char *pwrdm_name; + + /* Powerdomain pointer (looked up at clkdm_init() time) */ + struct powerdomain *pwrdm; + + /* OMAP chip types that this clockdomain dep is valid on */ + const struct omap_chip_id omap_chip; + +}; + +struct clockdomain { + + /* Clockdomain name */ + const char *name; + + /* Powerdomain enclosing this clockdomain */ + const char *pwrdm_name; + + /* CLKTRCTRL/AUTOSTATE field mask in CM_CLKSTCTRL reg */ + const u16 clktrctrl_mask; + + /* Clockdomain capability flags */ + const u8 flags; + + /* OMAP chip types that this clockdomain is valid on */ + const struct omap_chip_id omap_chip; + + /* Usecount tracking */ + atomic_t usecount; + + /* Powerdomain pointer assigned at clkdm_register() */ + struct powerdomain *pwrdm; + + struct list_head node; + +}; + +void clkdm_init(struct clockdomain **clkdms, struct clkdm_pwrdm_autodep *autodeps); +int clkdm_register(struct clockdomain *clkdm); +int clkdm_unregister(struct clockdomain *clkdm); +struct clockdomain *clkdm_lookup(const char *name); + +int clkdm_for_each(int (*fn)(struct clockdomain *clkdm)); +struct powerdomain *clkdm_get_pwrdm(struct clockdomain *clkdm); + +void omap2_clkdm_allow_idle(struct clockdomain *clkdm); +void omap2_clkdm_deny_idle(struct clockdomain *clkdm); + +int omap2_clkdm_wakeup(struct clockdomain *clkdm); +int omap2_clkdm_sleep(struct clockdomain *clkdm); + +int omap2_clkdm_clk_enable(struct clockdomain *clkdm, struct clk *clk); +int omap2_clkdm_clk_disable(struct clockdomain *clkdm, struct clk *clk); + +#endif -- cgit v1.2.3-70-g09d2 From 8420bb13630032097be911a039cb64b5f62c01da Mon Sep 17 00:00:00 2001 From: Paul Walmsley Date: Tue, 19 Aug 2008 11:08:44 +0300 Subject: ARM: OMAP2: Clockdomain: Connect clockdomain code to powerdomain code Thie patch adds code to the powerdomain layer to track the clockdomains associated with each powerdomain. It also modifies the clockdomain code to register clockdomains with their corresponding powerdomain when the clockdomain is registered. Signed-off-by: Paul Walmsley Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/clockdomain.c | 4 + arch/arm/mach-omap2/powerdomain.c | 136 ++++++++++++++++++++++++++ arch/arm/plat-omap/include/mach/powerdomain.h | 16 +++ 3 files changed, 156 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-omap2/clockdomain.c b/arch/arm/mach-omap2/clockdomain.c index f867d8f1d0e..b6ff5aa4726 100644 --- a/arch/arm/mach-omap2/clockdomain.c +++ b/arch/arm/mach-omap2/clockdomain.c @@ -219,6 +219,8 @@ int clkdm_register(struct clockdomain *clkdm) list_add(&clkdm->node, &clkdm_list); + pwrdm_add_clkdm(pwrdm, clkdm); + pr_debug("clockdomain: registered %s\n", clkdm->name); ret = 0; @@ -240,6 +242,8 @@ int clkdm_unregister(struct clockdomain *clkdm) if (!clkdm) return -EINVAL; + pwrdm_del_clkdm(clkdm->pwrdm, clkdm); + mutex_lock(&clkdm_mutex); list_del(&clkdm->node); mutex_unlock(&clkdm_mutex); diff --git a/arch/arm/mach-omap2/powerdomain.c b/arch/arm/mach-omap2/powerdomain.c index 1ec003832ef..9a803492b28 100644 --- a/arch/arm/mach-omap2/powerdomain.c +++ b/arch/arm/mach-omap2/powerdomain.c @@ -33,6 +33,7 @@ #include #include +#include /* pwrdm_list contains all registered struct powerdomains */ static LIST_HEAD(pwrdm_list); @@ -236,6 +237,141 @@ int pwrdm_for_each(int (*fn)(struct powerdomain *pwrdm)) return ret; } +/** + * pwrdm_add_clkdm - add a clockdomain to a powerdomain + * @pwrdm: struct powerdomain * to add the clockdomain to + * @clkdm: struct clockdomain * to associate with a powerdomain + * + * Associate the clockdomain 'clkdm' with a powerdomain 'pwrdm'. This + * enables the use of pwrdm_for_each_clkdm(). Returns -EINVAL if + * presented with invalid pointers; -ENOMEM if memory could not be allocated; + * or 0 upon success. + */ +int pwrdm_add_clkdm(struct powerdomain *pwrdm, struct clockdomain *clkdm) +{ + unsigned long flags; + int i; + int ret = -EINVAL; + + if (!pwrdm || !clkdm) + return -EINVAL; + + pr_debug("powerdomain: associating clockdomain %s with powerdomain " + "%s\n", clkdm->name, pwrdm->name); + + write_lock_irqsave(&pwrdm_rwlock, flags); + + for (i = 0; i < PWRDM_MAX_CLKDMS; i++) { + if (!pwrdm->pwrdm_clkdms[i]) + break; +#ifdef DEBUG + if (pwrdm->pwrdm_clkdms[i] == clkdm) { + ret = -EINVAL; + goto pac_exit; + } +#endif + } + + if (i == PWRDM_MAX_CLKDMS) { + pr_debug("powerdomain: increase PWRDM_MAX_CLKDMS for " + "pwrdm %s clkdm %s\n", pwrdm->name, clkdm->name); + WARN_ON(1); + ret = -ENOMEM; + goto pac_exit; + } + + pwrdm->pwrdm_clkdms[i] = clkdm; + + ret = 0; + +pac_exit: + write_unlock_irqrestore(&pwrdm_rwlock, flags); + + return ret; +} + +/** + * pwrdm_del_clkdm - remove a clockdomain from a powerdomain + * @pwrdm: struct powerdomain * to add the clockdomain to + * @clkdm: struct clockdomain * to associate with a powerdomain + * + * Dissociate the clockdomain 'clkdm' from the powerdomain + * 'pwrdm'. Returns -EINVAL if presented with invalid pointers; + * -ENOENT if the clkdm was not associated with the powerdomain, or 0 + * upon success. + */ +int pwrdm_del_clkdm(struct powerdomain *pwrdm, struct clockdomain *clkdm) +{ + unsigned long flags; + int ret = -EINVAL; + int i; + + if (!pwrdm || !clkdm) + return -EINVAL; + + pr_debug("powerdomain: dissociating clockdomain %s from powerdomain " + "%s\n", clkdm->name, pwrdm->name); + + write_lock_irqsave(&pwrdm_rwlock, flags); + + for (i = 0; i < PWRDM_MAX_CLKDMS; i++) + if (pwrdm->pwrdm_clkdms[i] == clkdm) + break; + + if (i == PWRDM_MAX_CLKDMS) { + pr_debug("powerdomain: clkdm %s not associated with pwrdm " + "%s ?!\n", clkdm->name, pwrdm->name); + ret = -ENOENT; + goto pdc_exit; + } + + pwrdm->pwrdm_clkdms[i] = NULL; + + ret = 0; + +pdc_exit: + write_unlock_irqrestore(&pwrdm_rwlock, flags); + + return ret; +} + +/** + * pwrdm_for_each_clkdm - call function on each clkdm in a pwrdm + * @pwrdm: struct powerdomain * to iterate over + * @fn: callback function * + * + * Call the supplied function for each clockdomain in the powerdomain + * 'pwrdm'. The callback function can return anything but 0 to bail + * out early from the iterator. The callback function is called with + * the pwrdm_rwlock held for reading, so no powerdomain structure + * manipulation functions should be called from the callback, although + * hardware powerdomain control functions are fine. Returns -EINVAL + * if presented with invalid pointers; or passes along the last return + * value of the callback function, which should be 0 for success or + * anything else to indicate failure. + */ +int pwrdm_for_each_clkdm(struct powerdomain *pwrdm, + int (*fn)(struct powerdomain *pwrdm, + struct clockdomain *clkdm)) +{ + unsigned long flags; + int ret = 0; + int i; + + if (!fn) + return -EINVAL; + + read_lock_irqsave(&pwrdm_rwlock, flags); + + for (i = 0; i < PWRDM_MAX_CLKDMS && !ret; i++) + ret = (*fn)(pwrdm, pwrdm->pwrdm_clkdms[i]); + + read_unlock_irqrestore(&pwrdm_rwlock, flags); + + return ret; +} + + /** * pwrdm_add_wkdep - add a wakeup dependency from pwrdm2 to pwrdm1 * @pwrdm1: wake this struct powerdomain * up (dependent) diff --git a/arch/arm/plat-omap/include/mach/powerdomain.h b/arch/arm/plat-omap/include/mach/powerdomain.h index c8f52c6f8b7..5fa666fa9be 100644 --- a/arch/arm/plat-omap/include/mach/powerdomain.h +++ b/arch/arm/plat-omap/include/mach/powerdomain.h @@ -44,9 +44,16 @@ */ #define PWRDM_MAX_MEM_BANKS 4 +/* + * Maximum number of clockdomains that can be associated with a powerdomain. + * CORE powerdomain is probably the worst case. + */ +#define PWRDM_MAX_CLKDMS 3 + /* XXX A completely arbitrary number. What is reasonable here? */ #define PWRDM_TRANSITION_BAILOUT 100000 +struct clockdomain; struct powerdomain; /* Encodes dependencies between powerdomains - statically defined */ @@ -98,6 +105,9 @@ struct powerdomain { /* Possible memory bank pwrstates when pwrdm is ON */ const u8 pwrsts_mem_on[PWRDM_MAX_MEM_BANKS]; + /* Clockdomains in this powerdomain */ + struct clockdomain *pwrdm_clkdms[PWRDM_MAX_CLKDMS]; + struct list_head node; }; @@ -111,6 +121,12 @@ struct powerdomain *pwrdm_lookup(const char *name); int pwrdm_for_each(int (*fn)(struct powerdomain *pwrdm)); +int pwrdm_add_clkdm(struct powerdomain *pwrdm, struct clockdomain *clkdm); +int pwrdm_del_clkdm(struct powerdomain *pwrdm, struct clockdomain *clkdm); +int pwrdm_for_each_clkdm(struct powerdomain *pwrdm, + int (*fn)(struct powerdomain *pwrdm, + struct clockdomain *clkdm)); + int pwrdm_add_wkdep(struct powerdomain *pwrdm1, struct powerdomain *pwrdm2); int pwrdm_del_wkdep(struct powerdomain *pwrdm1, struct powerdomain *pwrdm2); int pwrdm_read_wkdep(struct powerdomain *pwrdm1, struct powerdomain *pwrdm2); -- cgit v1.2.3-70-g09d2 From 801954d3debb87af9fa7f9187cb1100175d76ac7 Mon Sep 17 00:00:00 2001 From: Paul Walmsley Date: Tue, 19 Aug 2008 11:08:44 +0300 Subject: ARM: OMAP2: Clockdomain: Encode OMAP2/3 clockdomains Add clockdomain definitions for OMAP24xx and OMAP34xx chips. Signed-off-by: Paul Walmsley Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/clockdomains.h | 298 ++++++++++++++++++++++++++++++++++ arch/arm/mach-omap2/cm-regbits-24xx.h | 24 ++- arch/arm/mach-omap2/cm-regbits-34xx.h | 42 +++-- arch/arm/mach-omap2/io.c | 4 + 4 files changed, 349 insertions(+), 19 deletions(-) create mode 100644 arch/arm/mach-omap2/clockdomains.h (limited to 'arch') diff --git a/arch/arm/mach-omap2/clockdomains.h b/arch/arm/mach-omap2/clockdomains.h new file mode 100644 index 00000000000..a2763203713 --- /dev/null +++ b/arch/arm/mach-omap2/clockdomains.h @@ -0,0 +1,298 @@ +/* + * OMAP2/3 clockdomains + * + * Copyright (C) 2008 Texas Instruments, Inc. + * Copyright (C) 2008 Nokia Corporation + * + * Written by Paul Walmsley + */ + +#ifndef __ARCH_ARM_MACH_OMAP2_CLOCKDOMAINS_H +#define __ARCH_ARM_MACH_OMAP2_CLOCKDOMAINS_H + +#include + +/* + * OMAP2/3-common clockdomains + */ + +/* This is an implicit clockdomain - it is never defined as such in TRM */ +static struct clockdomain wkup_clkdm = { + .name = "wkup_clkdm", + .pwrdm_name = "wkup_pwrdm", + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX | CHIP_IS_OMAP3430), +}; + +/* + * 2420-only clockdomains + */ + +#if defined(CONFIG_ARCH_OMAP2420) + +static struct clockdomain mpu_2420_clkdm = { + .name = "mpu_clkdm", + .pwrdm_name = "mpu_pwrdm", + .flags = CLKDM_CAN_HWSUP, + .clktrctrl_mask = OMAP24XX_AUTOSTATE_MPU_MASK, + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420), +}; + +static struct clockdomain iva1_2420_clkdm = { + .name = "iva1_clkdm", + .pwrdm_name = "dsp_pwrdm", + .flags = CLKDM_CAN_HWSUP_SWSUP, + .clktrctrl_mask = OMAP2420_AUTOSTATE_IVA_MASK, + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420), +}; + +#endif /* CONFIG_ARCH_OMAP2420 */ + + +/* + * 2430-only clockdomains + */ + +#if defined(CONFIG_ARCH_OMAP2430) + +static struct clockdomain mpu_2430_clkdm = { + .name = "mpu_clkdm", + .pwrdm_name = "mpu_pwrdm", + .flags = CLKDM_CAN_HWSUP_SWSUP, + .clktrctrl_mask = OMAP24XX_AUTOSTATE_MPU_MASK, + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430), +}; + +static struct clockdomain mdm_clkdm = { + .name = "mdm_clkdm", + .pwrdm_name = "mdm_pwrdm", + .flags = CLKDM_CAN_HWSUP_SWSUP, + .clktrctrl_mask = OMAP2430_AUTOSTATE_MDM_MASK, + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430), +}; + +#endif /* CONFIG_ARCH_OMAP2430 */ + + +/* + * 24XX-only clockdomains + */ + +#if defined(CONFIG_ARCH_OMAP24XX) + +static struct clockdomain dsp_clkdm = { + .name = "dsp_clkdm", + .pwrdm_name = "dsp_pwrdm", + .flags = CLKDM_CAN_HWSUP_SWSUP, + .clktrctrl_mask = OMAP24XX_AUTOSTATE_DSP_MASK, + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX), +}; + +static struct clockdomain gfx_24xx_clkdm = { + .name = "gfx_clkdm", + .pwrdm_name = "gfx_pwrdm", + .flags = CLKDM_CAN_HWSUP_SWSUP, + .clktrctrl_mask = OMAP24XX_AUTOSTATE_GFX_MASK, + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX), +}; + +static struct clockdomain core_l3_24xx_clkdm = { + .name = "core_l3_clkdm", + .pwrdm_name = "core_pwrdm", + .flags = CLKDM_CAN_HWSUP, + .clktrctrl_mask = OMAP24XX_AUTOSTATE_L3_MASK, + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX), +}; + +static struct clockdomain core_l4_24xx_clkdm = { + .name = "core_l4_clkdm", + .pwrdm_name = "core_pwrdm", + .flags = CLKDM_CAN_HWSUP, + .clktrctrl_mask = OMAP24XX_AUTOSTATE_L4_MASK, + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX), +}; + +static struct clockdomain dss_24xx_clkdm = { + .name = "dss_clkdm", + .pwrdm_name = "core_pwrdm", + .flags = CLKDM_CAN_HWSUP, + .clktrctrl_mask = OMAP24XX_AUTOSTATE_DSS_MASK, + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX), +}; + +#endif /* CONFIG_ARCH_OMAP24XX */ + + +/* + * 34xx clockdomains + */ + +#if defined(CONFIG_ARCH_OMAP34XX) + +static struct clockdomain mpu_34xx_clkdm = { + .name = "mpu_clkdm", + .pwrdm_name = "mpu_pwrdm", + .flags = CLKDM_CAN_HWSUP | CLKDM_CAN_FORCE_WAKEUP, + .clktrctrl_mask = OMAP3430_CLKTRCTRL_MPU_MASK, + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430), +}; + +static struct clockdomain neon_clkdm = { + .name = "neon_clkdm", + .pwrdm_name = "neon_pwrdm", + .flags = CLKDM_CAN_HWSUP_SWSUP, + .clktrctrl_mask = OMAP3430_CLKTRCTRL_NEON_MASK, + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430), +}; + +static struct clockdomain iva2_clkdm = { + .name = "iva2_clkdm", + .pwrdm_name = "iva2_pwrdm", + .flags = CLKDM_CAN_HWSUP_SWSUP, + .clktrctrl_mask = OMAP3430_CLKTRCTRL_IVA2_MASK, + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430), +}; + +static struct clockdomain gfx_3430es1_clkdm = { + .name = "gfx_clkdm", + .pwrdm_name = "gfx_pwrdm", + .flags = CLKDM_CAN_HWSUP_SWSUP, + .clktrctrl_mask = OMAP3430ES1_CLKTRCTRL_GFX_MASK, + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430ES1), +}; + +static struct clockdomain sgx_clkdm = { + .name = "sgx_clkdm", + .pwrdm_name = "sgx_pwrdm", + .flags = CLKDM_CAN_HWSUP_SWSUP, + .clktrctrl_mask = OMAP3430ES2_CLKTRCTRL_SGX_MASK, + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430ES2), +}; + +static struct clockdomain d2d_clkdm = { + .name = "d2d_clkdm", + .pwrdm_name = "core_pwrdm", + .flags = CLKDM_CAN_HWSUP, + .clktrctrl_mask = OMAP3430ES1_CLKTRCTRL_D2D_MASK, + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430ES1), +}; + +static struct clockdomain core_l3_34xx_clkdm = { + .name = "core_l3_clkdm", + .pwrdm_name = "core_pwrdm", + .flags = CLKDM_CAN_HWSUP, + .clktrctrl_mask = OMAP3430_CLKTRCTRL_L3_MASK, + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430), +}; + +static struct clockdomain core_l4_34xx_clkdm = { + .name = "core_l4_clkdm", + .pwrdm_name = "core_pwrdm", + .flags = CLKDM_CAN_HWSUP, + .clktrctrl_mask = OMAP3430_CLKTRCTRL_L4_MASK, + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430), +}; + +static struct clockdomain dss_34xx_clkdm = { + .name = "dss_clkdm", + .pwrdm_name = "dss_pwrdm", + .flags = CLKDM_CAN_HWSUP_SWSUP, + .clktrctrl_mask = OMAP3430_CLKTRCTRL_DSS_MASK, + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430), +}; + +static struct clockdomain cam_clkdm = { + .name = "cam_clkdm", + .pwrdm_name = "cam_pwrdm", + .flags = CLKDM_CAN_HWSUP_SWSUP, + .clktrctrl_mask = OMAP3430_CLKTRCTRL_CAM_MASK, + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430), +}; + +static struct clockdomain usbhost_clkdm = { + .name = "usbhost_clkdm", + .pwrdm_name = "usbhost_pwrdm", + .flags = CLKDM_CAN_HWSUP_SWSUP, + .clktrctrl_mask = OMAP3430ES2_CLKTRCTRL_USBHOST_MASK, + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430ES2), +}; + +static struct clockdomain per_clkdm = { + .name = "per_clkdm", + .pwrdm_name = "per_pwrdm", + .flags = CLKDM_CAN_HWSUP_SWSUP, + .clktrctrl_mask = OMAP3430_CLKTRCTRL_PER_MASK, + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430), +}; + +static struct clockdomain emu_clkdm = { + .name = "emu_clkdm", + .pwrdm_name = "emu_pwrdm", + .flags = CLKDM_CAN_ENABLE_AUTO | CLKDM_CAN_SWSUP, + .clktrctrl_mask = OMAP3430_CLKTRCTRL_EMU_MASK, + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430), +}; + +#endif /* CONFIG_ARCH_OMAP34XX */ + +/* + * Clockdomain-powerdomain hwsup dependencies (34XX only) + */ + +static struct clkdm_pwrdm_autodep clkdm_pwrdm_autodeps[] = { + { + .pwrdm_name = "mpu_pwrdm", + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430) + }, + { + .pwrdm_name = "iva2_pwrdm", + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430) + }, + { NULL } +}; + +/* + * + */ + +static struct clockdomain *clockdomains_omap[] = { + + &wkup_clkdm, + +#ifdef CONFIG_ARCH_OMAP2420 + &mpu_2420_clkdm, + &iva1_2420_clkdm, +#endif + +#ifdef CONFIG_ARCH_OMAP2430 + &mpu_2430_clkdm, + &mdm_clkdm, +#endif + +#ifdef CONFIG_ARCH_OMAP24XX + &dsp_clkdm, + &gfx_24xx_clkdm, + &core_l3_24xx_clkdm, + &core_l4_24xx_clkdm, + &dss_24xx_clkdm, +#endif + +#ifdef CONFIG_ARCH_OMAP34XX + &mpu_34xx_clkdm, + &neon_clkdm, + &iva2_clkdm, + &gfx_3430es1_clkdm, + &sgx_clkdm, + &d2d_clkdm, + &core_l3_34xx_clkdm, + &core_l4_34xx_clkdm, + &dss_34xx_clkdm, + &cam_clkdm, + &usbhost_clkdm, + &per_clkdm, + &emu_clkdm, +#endif + + NULL, +}; + +#endif diff --git a/arch/arm/mach-omap2/cm-regbits-24xx.h b/arch/arm/mach-omap2/cm-regbits-24xx.h index 20ac3810067..1098ecfab86 100644 --- a/arch/arm/mach-omap2/cm-regbits-24xx.h +++ b/arch/arm/mach-omap2/cm-regbits-24xx.h @@ -63,7 +63,8 @@ #define OMAP24XX_CLKSEL_MPU_MASK (0x1f << 0) /* CM_CLKSTCTRL_MPU */ -#define OMAP24XX_AUTOSTATE_MPU (1 << 0) +#define OMAP24XX_AUTOSTATE_MPU_SHIFT 0 +#define OMAP24XX_AUTOSTATE_MPU_MASK (1 << 0) /* CM_FCLKEN1_CORE specific bits*/ #define OMAP24XX_EN_TV_SHIFT 2 @@ -238,9 +239,12 @@ #define OMAP24XX_CLKSEL_GPT2_MASK (0x3 << 2) /* CM_CLKSTCTRL_CORE */ -#define OMAP24XX_AUTOSTATE_DSS (1 << 2) -#define OMAP24XX_AUTOSTATE_L4 (1 << 1) -#define OMAP24XX_AUTOSTATE_L3 (1 << 0) +#define OMAP24XX_AUTOSTATE_DSS_SHIFT 2 +#define OMAP24XX_AUTOSTATE_DSS_MASK (1 << 2) +#define OMAP24XX_AUTOSTATE_L4_SHIFT 1 +#define OMAP24XX_AUTOSTATE_L4_MASK (1 << 1) +#define OMAP24XX_AUTOSTATE_L3_SHIFT 0 +#define OMAP24XX_AUTOSTATE_L3_MASK (1 << 0) /* CM_FCLKEN_GFX */ #define OMAP24XX_EN_3D_SHIFT 2 @@ -255,7 +259,8 @@ /* CM_CLKSEL_GFX specific bits */ /* CM_CLKSTCTRL_GFX */ -#define OMAP24XX_AUTOSTATE_GFX (1 << 0) +#define OMAP24XX_AUTOSTATE_GFX_SHIFT 0 +#define OMAP24XX_AUTOSTATE_GFX_MASK (1 << 0) /* CM_FCLKEN_WKUP specific bits */ @@ -367,8 +372,10 @@ #define OMAP24XX_CLKSEL_DSP_MASK (0x1f << 0) /* CM_CLKSTCTRL_DSP */ -#define OMAP2420_AUTOSTATE_IVA (1 << 8) -#define OMAP24XX_AUTOSTATE_DSP (1 << 0) +#define OMAP2420_AUTOSTATE_IVA_SHIFT 8 +#define OMAP2420_AUTOSTATE_IVA_MASK (1 << 8) +#define OMAP24XX_AUTOSTATE_DSP_SHIFT 0 +#define OMAP24XX_AUTOSTATE_DSP_MASK (1 << 0) /* CM_FCLKEN_MDM */ /* 2430 only */ @@ -396,6 +403,7 @@ /* CM_CLKSTCTRL_MDM */ /* 2430 only */ -#define OMAP2430_AUTOSTATE_MDM (1 << 0) +#define OMAP2430_AUTOSTATE_MDM_SHIFT 0 +#define OMAP2430_AUTOSTATE_MDM_MASK (1 << 0) #endif diff --git a/arch/arm/mach-omap2/cm-regbits-34xx.h b/arch/arm/mach-omap2/cm-regbits-34xx.h index ee4c0ca1a70..219f5c8d965 100644 --- a/arch/arm/mach-omap2/cm-regbits-34xx.h +++ b/arch/arm/mach-omap2/cm-regbits-34xx.h @@ -96,7 +96,8 @@ #define OMAP3430_CLKTRCTRL_IVA2_MASK (0x3 << 0) /* CM_CLKSTST_IVA2 */ -#define OMAP3430_CLKACTIVITY_IVA2 (1 << 0) +#define OMAP3430_CLKACTIVITY_IVA2_SHIFT 0 +#define OMAP3430_CLKACTIVITY_IVA2_MASK (1 << 0) /* CM_REVISION specific bits */ @@ -140,7 +141,8 @@ #define OMAP3430_CLKTRCTRL_MPU_MASK (0x3 << 0) /* CM_CLKSTST_MPU */ -#define OMAP3430_CLKACTIVITY_MPU (1 << 0) +#define OMAP3430_CLKACTIVITY_MPU_SHIFT 0 +#define OMAP3430_CLKACTIVITY_MPU_MASK (1 << 0) /* CM_FCLKEN1_CORE specific bits */ @@ -300,9 +302,12 @@ #define OMAP3430_CLKTRCTRL_L3_MASK (0x3 << 0) /* CM_CLKSTST_CORE */ -#define OMAP3430ES1_CLKACTIVITY_D2D (1 << 2) -#define OMAP3430_CLKACTIVITY_L4 (1 << 1) -#define OMAP3430_CLKACTIVITY_L3 (1 << 0) +#define OMAP3430ES1_CLKACTIVITY_D2D_SHIFT 2 +#define OMAP3430ES1_CLKACTIVITY_D2D_MASK (1 << 2) +#define OMAP3430_CLKACTIVITY_L4_SHIFT 1 +#define OMAP3430_CLKACTIVITY_L4_MASK (1 << 1) +#define OMAP3430_CLKACTIVITY_L3_SHIFT 0 +#define OMAP3430_CLKACTIVITY_L3_MASK (1 << 0) /* CM_FCLKEN_GFX */ #define OMAP3430ES1_EN_3D (1 << 2) @@ -323,7 +328,8 @@ #define OMAP3430ES1_CLKTRCTRL_GFX_MASK (0x3 << 0) /* CM_CLKSTST_GFX */ -#define OMAP3430ES1_CLKACTIVITY_GFX (1 << 0) +#define OMAP3430ES1_CLKACTIVITY_GFX_SHIFT 0 +#define OMAP3430ES1_CLKACTIVITY_GFX_MASK (1 << 0) /* CM_FCLKEN_SGX */ #define OMAP3430ES2_EN_SGX_SHIFT 1 @@ -333,6 +339,14 @@ #define OMAP3430ES2_CLKSEL_SGX_SHIFT 0 #define OMAP3430ES2_CLKSEL_SGX_MASK (0x7 << 0) +/* CM_CLKSTCTRL_SGX */ +#define OMAP3430ES2_CLKTRCTRL_SGX_SHIFT 0 +#define OMAP3430ES2_CLKTRCTRL_SGX_MASK (0x3 << 0) + +/* CM_CLKSTST_SGX */ +#define OMAP3430ES2_CLKACTIVITY_SGX_SHIFT 0 +#define OMAP3430ES2_CLKACTIVITY_SGX_MASK (1 << 0) + /* CM_FCLKEN_WKUP specific bits */ #define OMAP3430ES2_EN_USIMOCP_SHIFT 9 @@ -498,7 +512,8 @@ #define OMAP3430_CLKTRCTRL_DSS_MASK (0x3 << 0) /* CM_CLKSTST_DSS */ -#define OMAP3430_CLKACTIVITY_DSS (1 << 0) +#define OMAP3430_CLKACTIVITY_DSS_SHIFT 0 +#define OMAP3430_CLKACTIVITY_DSS_MASK (1 << 0) /* CM_FCLKEN_CAM specific bits */ @@ -522,7 +537,8 @@ #define OMAP3430_CLKTRCTRL_CAM_MASK (0x3 << 0) /* CM_CLKSTST_CAM */ -#define OMAP3430_CLKACTIVITY_CAM (1 << 0) +#define OMAP3430_CLKACTIVITY_CAM_SHIFT 0 +#define OMAP3430_CLKACTIVITY_CAM_MASK (1 << 0) /* CM_FCLKEN_PER specific bits */ @@ -598,7 +614,8 @@ #define OMAP3430_CLKTRCTRL_PER_MASK (0x3 << 0) /* CM_CLKSTST_PER */ -#define OMAP3430_CLKACTIVITY_PER (1 << 0) +#define OMAP3430_CLKACTIVITY_PER_SHIFT 0 +#define OMAP3430_CLKACTIVITY_PER_MASK (1 << 0) /* CM_CLKSEL1_EMU */ #define OMAP3430_DIV_DPLL4_SHIFT 24 @@ -623,7 +640,8 @@ #define OMAP3430_CLKTRCTRL_EMU_MASK (0x3 << 0) /* CM_CLKSTST_EMU */ -#define OMAP3430_CLKACTIVITY_EMU (1 << 0) +#define OMAP3430_CLKACTIVITY_EMU_SHIFT 0 +#define OMAP3430_CLKACTIVITY_EMU_MASK (1 << 0) /* CM_CLKSEL2_EMU specific bits */ #define OMAP3430_CORE_DPLL_EMU_MULT_SHIFT 8 @@ -673,6 +691,8 @@ #define OMAP3430ES2_CLKTRCTRL_USBHOST_SHIFT 0 #define OMAP3430ES2_CLKTRCTRL_USBHOST_MASK (3 << 0) - +/* CM_CLKSTST_USBHOST */ +#define OMAP3430ES2_CLKACTIVITY_USBHOST_SHIFT 0 +#define OMAP3430ES2_CLKACTIVITY_USBHOST_MASK (1 << 0) #endif diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c index 5f73cf0bb7e..371e5409fef 100644 --- a/arch/arm/mach-omap2/io.c +++ b/arch/arm/mach-omap2/io.c @@ -28,6 +28,9 @@ #include "powerdomains.h" +#include +#include "clockdomains.h" + extern void omap_sram_init(void); extern int omap2_clk_init(void); extern void omap2_check_revision(void); @@ -106,6 +109,7 @@ void __init omap2_init_common_hw(void) { omap2_mux_init(); pwrdm_init(powerdomains_omap); + clkdm_init(clockdomains_omap, clkdm_pwrdm_autodeps); omap2_clk_init(); /* * Need to Fix this for 2430 -- cgit v1.2.3-70-g09d2 From d1b03f615ae7ede957551dd26bf8929bdc2bb786 Mon Sep 17 00:00:00 2001 From: Paul Walmsley Date: Tue, 19 Aug 2008 11:08:44 +0300 Subject: ARM: OMAP2: Clockdomain: Associate clocks with clockdomains Associate each OMAP24xx clock in arch/arm/mach-omap2/clock24xx.h with a clockdomain. Also move the L4 clock up higher in the file in preparation to define the SSI L4 iclk. Signed-off-by: Paul Walmsley Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/clock24xx.h | 238 +++++++++++++++++++++++++------- arch/arm/plat-omap/include/mach/clock.h | 3 + 2 files changed, 190 insertions(+), 51 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/clock24xx.h b/arch/arm/mach-omap2/clock24xx.h index be4e25554e0..242a19d86cc 100644 --- a/arch/arm/mach-omap2/clock24xx.h +++ b/arch/arm/mach-omap2/clock24xx.h @@ -626,6 +626,7 @@ static struct clk func_32k_ck = { .rate = 32000, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | RATE_FIXED | ALWAYS_ENABLED | RATE_PROPAGATES, + .clkdm_name = "wkup_clkdm", .recalc = &propagate_rate, }; @@ -634,17 +635,19 @@ static struct clk osc_ck = { /* (*12, *13, 19.2, *26, 38.4)MHz */ .name = "osc_ck", .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | RATE_PROPAGATES, + .clkdm_name = "wkup_clkdm", .enable = &omap2_enable_osc_ck, .disable = &omap2_disable_osc_ck, .recalc = &omap2_osc_clk_recalc, }; -/* With out modem likely 12MHz, with modem likely 13MHz */ +/* Without modem likely 12MHz, with modem likely 13MHz */ static struct clk sys_ck = { /* (*12, *13, 19.2, 26, 38.4)MHz */ .name = "sys_ck", /* ~ ref_clk also */ .parent = &osc_ck, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | ALWAYS_ENABLED | RATE_PROPAGATES, + .clkdm_name = "wkup_clkdm", .recalc = &omap2_sys_clk_recalc, }; @@ -653,6 +656,7 @@ static struct clk alt_ck = { /* Typical 54M or 48M, may not exist */ .rate = 54000000, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | RATE_FIXED | ALWAYS_ENABLED | RATE_PROPAGATES, + .clkdm_name = "wkup_clkdm", .recalc = &propagate_rate, }; @@ -684,6 +688,7 @@ static struct clk dpll_ck = { .dpll_data = &dpll_dd, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | RATE_PROPAGATES | ALWAYS_ENABLED, + .clkdm_name = "wkup_clkdm", .recalc = &omap2_dpllcore_recalc, .set_rate = &omap2_reprogram_dpllcore, }; @@ -694,6 +699,7 @@ static struct clk apll96_ck = { .rate = 96000000, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | RATE_FIXED | RATE_PROPAGATES | ENABLE_ON_INIT, + .clkdm_name = "wkup_clkdm", .enable_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN), .enable_bit = OMAP24XX_EN_96M_PLL_SHIFT, .enable = &omap2_clk_fixed_enable, @@ -707,6 +713,7 @@ static struct clk apll54_ck = { .rate = 54000000, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | RATE_FIXED | RATE_PROPAGATES | ENABLE_ON_INIT, + .clkdm_name = "wkup_clkdm", .enable_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN), .enable_bit = OMAP24XX_EN_54M_PLL_SHIFT, .enable = &omap2_clk_fixed_enable, @@ -741,6 +748,7 @@ static struct clk func_54m_ck = { .parent = &apll54_ck, /* can also be alt_clk */ .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | RATE_PROPAGATES | PARENT_CONTROLS_CLOCK, + .clkdm_name = "wkup_clkdm", .init = &omap2_init_clksel_parent, .clksel_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1), .clksel_mask = OMAP24XX_54M_SOURCE, @@ -753,6 +761,7 @@ static struct clk core_ck = { .parent = &dpll_ck, /* can also be 32k */ .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | ALWAYS_ENABLED | RATE_PROPAGATES, + .clkdm_name = "wkup_clkdm", .recalc = &followparent_recalc, }; @@ -779,6 +788,7 @@ static struct clk func_96m_ck = { .parent = &apll96_ck, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | RATE_PROPAGATES | PARENT_CONTROLS_CLOCK, + .clkdm_name = "wkup_clkdm", .init = &omap2_init_clksel_parent, .clksel_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1), .clksel_mask = OMAP2430_96M_SOURCE, @@ -811,6 +821,7 @@ static struct clk func_48m_ck = { .parent = &apll96_ck, /* 96M or Alt */ .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | RATE_PROPAGATES | PARENT_CONTROLS_CLOCK, + .clkdm_name = "wkup_clkdm", .init = &omap2_init_clksel_parent, .clksel_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1), .clksel_mask = OMAP24XX_48M_SOURCE, @@ -826,6 +837,7 @@ static struct clk func_12m_ck = { .fixed_div = 4, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | RATE_PROPAGATES | PARENT_CONTROLS_CLOCK, + .clkdm_name = "wkup_clkdm", .recalc = &omap2_fixed_divisor_recalc, }; @@ -878,6 +890,7 @@ static struct clk sys_clkout_src = { .parent = &func_54m_ck, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | RATE_PROPAGATES, + .clkdm_name = "wkup_clkdm", .enable_reg = OMAP24XX_PRCM_CLKOUT_CTRL, .enable_bit = OMAP24XX_CLKOUT_EN_SHIFT, .init = &omap2_init_clksel_parent, @@ -908,6 +921,7 @@ static struct clk sys_clkout = { .parent = &sys_clkout_src, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | PARENT_CONTROLS_CLOCK, + .clkdm_name = "wkup_clkdm", .clksel_reg = OMAP24XX_PRCM_CLKOUT_CTRL, .clksel_mask = OMAP24XX_CLKOUT_DIV_MASK, .clksel = sys_clkout_clksel, @@ -921,6 +935,7 @@ static struct clk sys_clkout2_src = { .name = "sys_clkout2_src", .parent = &func_54m_ck, .flags = CLOCK_IN_OMAP242X | RATE_PROPAGATES, + .clkdm_name = "wkup_clkdm", .enable_reg = OMAP24XX_PRCM_CLKOUT_CTRL, .enable_bit = OMAP2420_CLKOUT2_EN_SHIFT, .init = &omap2_init_clksel_parent, @@ -942,6 +957,7 @@ static struct clk sys_clkout2 = { .name = "sys_clkout2", .parent = &sys_clkout2_src, .flags = CLOCK_IN_OMAP242X | PARENT_CONTROLS_CLOCK, + .clkdm_name = "wkup_clkdm", .clksel_reg = OMAP24XX_PRCM_CLKOUT_CTRL, .clksel_mask = OMAP2420_CLKOUT2_DIV_MASK, .clksel = sys_clkout2_clksel, @@ -954,6 +970,7 @@ static struct clk emul_ck = { .name = "emul_ck", .parent = &func_54m_ck, .flags = CLOCK_IN_OMAP242X, + .clkdm_name = "wkup_clkdm", .enable_reg = OMAP24XX_PRCM_CLKEMUL_CTRL, .enable_bit = OMAP24XX_EMULATION_EN_SHIFT, .recalc = &followparent_recalc, @@ -990,12 +1007,13 @@ static struct clk mpu_ck = { /* Control cpu */ .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | ALWAYS_ENABLED | DELAYED_APP | CONFIG_PARTICIPANT | RATE_PROPAGATES, + .clkdm_name = "mpu_clkdm", .init = &omap2_init_clksel_parent, .clksel_reg = OMAP_CM_REGADDR(MPU_MOD, CM_CLKSEL), .clksel_mask = OMAP24XX_CLKSEL_MPU_MASK, .clksel = mpu_clksel, .recalc = &omap2_clksel_recalc, - .round_rate = &omap2_clksel_round_rate, + .round_rate = &omap2_clksel_round_rate, .set_rate = &omap2_clksel_set_rate }; @@ -1031,6 +1049,7 @@ static struct clk dsp_fck = { .parent = &core_ck, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | DELAYED_APP | CONFIG_PARTICIPANT | RATE_PROPAGATES, + .clkdm_name = "dsp_clkdm", .enable_reg = OMAP_CM_REGADDR(OMAP24XX_DSP_MOD, CM_FCLKEN), .enable_bit = OMAP24XX_CM_FCLKEN_DSP_EN_DSP_SHIFT, .clksel_reg = OMAP_CM_REGADDR(OMAP24XX_DSP_MOD, CM_CLKSEL), @@ -1054,10 +1073,7 @@ static const struct clksel dsp_irate_ick_clksel[] = { { .parent = NULL } }; -/* - * This clock does not exist as such in the TRM, but is added to - * separate source selection from XXX - */ +/* This clock does not exist as such in the TRM. */ static struct clk dsp_irate_ick = { .name = "dsp_irate_ick", .parent = &dsp_fck, @@ -1089,11 +1105,17 @@ static struct clk iva2_1_ick = { .enable_bit = OMAP24XX_CM_FCLKEN_DSP_EN_DSP_SHIFT, }; +/* + * The IVA1 is an ARM7 core on the 2420 that has nothing to do with + * the C54x, but which is contained in the DSP powerdomain. Does not + * exist on later OMAPs. + */ static struct clk iva1_ifck = { .name = "iva1_ifck", .parent = &core_ck, .flags = CLOCK_IN_OMAP242X | CONFIG_PARTICIPANT | RATE_PROPAGATES | DELAYED_APP, + .clkdm_name = "iva1_clkdm", .enable_reg = OMAP_CM_REGADDR(OMAP24XX_DSP_MOD, CM_FCLKEN), .enable_bit = OMAP2420_EN_IVA_COP_SHIFT, .clksel_reg = OMAP_CM_REGADDR(OMAP24XX_DSP_MOD, CM_CLKSEL), @@ -1109,6 +1131,7 @@ static struct clk iva1_mpu_int_ifck = { .name = "iva1_mpu_int_ifck", .parent = &iva1_ifck, .flags = CLOCK_IN_OMAP242X, + .clkdm_name = "iva1_clkdm", .enable_reg = OMAP_CM_REGADDR(OMAP24XX_DSP_MOD, CM_FCLKEN), .enable_bit = OMAP2420_EN_IVA_MPU_SHIFT, .fixed_div = 2, @@ -1156,6 +1179,7 @@ static struct clk core_l3_ck = { /* Used for ick and fck, interconnect */ .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | ALWAYS_ENABLED | DELAYED_APP | CONFIG_PARTICIPANT | RATE_PROPAGATES, + .clkdm_name = "core_l3_clkdm", .clksel_reg = OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL1), .clksel_mask = OMAP24XX_CLKSEL_L3_MASK, .clksel = core_l3_clksel, @@ -1177,11 +1201,13 @@ static const struct clksel usb_l4_ick_clksel[] = { { .parent = NULL }, }; +/* It is unclear from TRM whether usb_l4_ick is really in L3 or L4 clkdm */ static struct clk usb_l4_ick = { /* FS-USB interface clock */ .name = "usb_l4_ick", .parent = &core_l3_ck, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | DELAYED_APP | CONFIG_PARTICIPANT, + .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2), .enable_bit = OMAP24XX_EN_USB_SHIFT, .clksel_reg = OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL1), @@ -1192,11 +1218,43 @@ static struct clk usb_l4_ick = { /* FS-USB interface clock */ .set_rate = &omap2_clksel_set_rate }; +/* + * L4 clock management domain + * + * This domain contains lots of interface clocks from the L4 interface, some + * functional clocks. Fixed APLL functional source clocks are managed in + * this domain. + */ +static const struct clksel_rate l4_core_l3_rates[] = { + { .div = 1, .val = 1, .flags = RATE_IN_24XX | DEFAULT_RATE }, + { .div = 2, .val = 2, .flags = RATE_IN_24XX }, + { .div = 0 } +}; + +static const struct clksel l4_clksel[] = { + { .parent = &core_l3_ck, .rates = l4_core_l3_rates }, + { .parent = NULL } +}; + +static struct clk l4_ck = { /* used both as an ick and fck */ + .name = "l4_ck", + .parent = &core_l3_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | + ALWAYS_ENABLED | DELAYED_APP | RATE_PROPAGATES, + .clkdm_name = "core_l4_clkdm", + .clksel_reg = OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL1), + .clksel_mask = OMAP24XX_CLKSEL_L4_MASK, + .clksel = l4_clksel, + .recalc = &omap2_clksel_recalc, + .round_rate = &omap2_clksel_round_rate, + .set_rate = &omap2_clksel_set_rate +}; + /* * SSI is in L3 management domain, its direct parent is core not l3, * many core power domain entities are grouped into the L3 clock * domain. - * SSI_SSR_FCLK, SSI_SST_FCLK, SSI_L4_CLIK + * SSI_SSR_FCLK, SSI_SST_FCLK, SSI_L4_ICLK * * ssr = core/1/2/3/4/5, sst = 1/2 ssr. */ @@ -1221,6 +1279,7 @@ static struct clk ssi_ssr_sst_fck = { .parent = &core_ck, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | DELAYED_APP, + .clkdm_name = "core_l3_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2), .enable_bit = OMAP24XX_EN_SSI_SHIFT, .clksel_reg = OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL1), @@ -1231,6 +1290,7 @@ static struct clk ssi_ssr_sst_fck = { .set_rate = &omap2_clksel_set_rate }; + /* * GFX clock domain * Clocks: @@ -1254,6 +1314,7 @@ static struct clk gfx_3d_fck = { .name = "gfx_3d_fck", .parent = &core_l3_ck, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .clkdm_name = "gfx_clkdm", .enable_reg = OMAP_CM_REGADDR(GFX_MOD, CM_FCLKEN), .enable_bit = OMAP24XX_EN_3D_SHIFT, .clksel_reg = OMAP_CM_REGADDR(GFX_MOD, CM_CLKSEL), @@ -1268,6 +1329,7 @@ static struct clk gfx_2d_fck = { .name = "gfx_2d_fck", .parent = &core_l3_ck, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .clkdm_name = "gfx_clkdm", .enable_reg = OMAP_CM_REGADDR(GFX_MOD, CM_FCLKEN), .enable_bit = OMAP24XX_EN_2D_SHIFT, .clksel_reg = OMAP_CM_REGADDR(GFX_MOD, CM_CLKSEL), @@ -1282,6 +1344,7 @@ static struct clk gfx_ick = { .name = "gfx_ick", /* From l3 */ .parent = &core_l3_ck, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .clkdm_name = "gfx_clkdm", .enable_reg = OMAP_CM_REGADDR(GFX_MOD, CM_ICLKEN), .enable_bit = OMAP_EN_GFX_SHIFT, .recalc = &followparent_recalc, @@ -1311,6 +1374,7 @@ static struct clk mdm_ick = { /* used both as a ick and fck */ .name = "mdm_ick", .parent = &core_ck, .flags = CLOCK_IN_OMAP243X | DELAYED_APP | CONFIG_PARTICIPANT, + .clkdm_name = "mdm_clkdm", .enable_reg = OMAP_CM_REGADDR(OMAP2430_MDM_MOD, CM_ICLKEN), .enable_bit = OMAP2430_CM_ICLKEN_MDM_EN_MDM_SHIFT, .clksel_reg = OMAP_CM_REGADDR(OMAP2430_MDM_MOD, CM_CLKSEL), @@ -1325,51 +1389,12 @@ static struct clk mdm_osc_ck = { .name = "mdm_osc_ck", .parent = &osc_ck, .flags = CLOCK_IN_OMAP243X, + .clkdm_name = "mdm_clkdm", .enable_reg = OMAP_CM_REGADDR(OMAP2430_MDM_MOD, CM_FCLKEN), .enable_bit = OMAP2430_EN_OSC_SHIFT, .recalc = &followparent_recalc, }; -/* - * L4 clock management domain - * - * This domain contains lots of interface clocks from the L4 interface, some - * functional clocks. Fixed APLL functional source clocks are managed in - * this domain. - */ -static const struct clksel_rate l4_core_l3_rates[] = { - { .div = 1, .val = 1, .flags = RATE_IN_24XX | DEFAULT_RATE }, - { .div = 2, .val = 2, .flags = RATE_IN_24XX }, - { .div = 0 } -}; - -static const struct clksel l4_clksel[] = { - { .parent = &core_l3_ck, .rates = l4_core_l3_rates }, - { .parent = NULL } -}; - -static struct clk l4_ck = { /* used both as an ick and fck */ - .name = "l4_ck", - .parent = &core_l3_ck, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | - ALWAYS_ENABLED | DELAYED_APP | RATE_PROPAGATES, - .clksel_reg = OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL1), - .clksel_mask = OMAP24XX_CLKSEL_L4_MASK, - .clksel = l4_clksel, - .recalc = &omap2_clksel_recalc, - .round_rate = &omap2_clksel_round_rate, - .set_rate = &omap2_clksel_set_rate -}; - -static struct clk ssi_l4_ick = { - .name = "ssi_l4_ick", - .parent = &l4_ck, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2), - .enable_bit = OMAP24XX_EN_SSI_SHIFT, - .recalc = &followparent_recalc, -}; - /* * DSS clock domain * CLOCKs: @@ -1409,6 +1434,7 @@ static struct clk dss_ick = { /* Enables both L3,L4 ICLK's */ .name = "dss_ick", .parent = &l4_ck, /* really both l3 and l4 */ .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .clkdm_name = "dss_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP24XX_EN_DSS1_SHIFT, .recalc = &followparent_recalc, @@ -1419,6 +1445,7 @@ static struct clk dss1_fck = { .parent = &core_ck, /* Core or sys */ .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | DELAYED_APP, + .clkdm_name = "dss_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), .enable_bit = OMAP24XX_EN_DSS1_SHIFT, .init = &omap2_init_clksel_parent, @@ -1451,6 +1478,7 @@ static struct clk dss2_fck = { /* Alt clk used in power management */ .parent = &sys_ck, /* fixed at sys_ck or 48MHz */ .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | DELAYED_APP, + .clkdm_name = "dss_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), .enable_bit = OMAP24XX_EN_DSS2_SHIFT, .init = &omap2_init_clksel_parent, @@ -1464,6 +1492,7 @@ static struct clk dss_54m_fck = { /* Alt clk used in power management */ .name = "dss_54m_fck", /* 54m tv clk */ .parent = &func_54m_ck, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .clkdm_name = "dss_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), .enable_bit = OMAP24XX_EN_TV_SHIFT, .recalc = &followparent_recalc, @@ -1491,6 +1520,7 @@ static struct clk gpt1_ick = { .name = "gpt1_ick", .parent = &l4_ck, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN), .enable_bit = OMAP24XX_EN_GPT1_SHIFT, .recalc = &followparent_recalc, @@ -1500,6 +1530,7 @@ static struct clk gpt1_fck = { .name = "gpt1_fck", .parent = &func_32k_ck, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN), .enable_bit = OMAP24XX_EN_GPT1_SHIFT, .init = &omap2_init_clksel_parent, @@ -1515,6 +1546,7 @@ static struct clk gpt2_ick = { .name = "gpt2_ick", .parent = &l4_ck, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP24XX_EN_GPT2_SHIFT, .recalc = &followparent_recalc, @@ -1524,6 +1556,7 @@ static struct clk gpt2_fck = { .name = "gpt2_fck", .parent = &func_32k_ck, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), .enable_bit = OMAP24XX_EN_GPT2_SHIFT, .init = &omap2_init_clksel_parent, @@ -1537,6 +1570,7 @@ static struct clk gpt3_ick = { .name = "gpt3_ick", .parent = &l4_ck, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP24XX_EN_GPT3_SHIFT, .recalc = &followparent_recalc, @@ -1546,6 +1580,7 @@ static struct clk gpt3_fck = { .name = "gpt3_fck", .parent = &func_32k_ck, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), .enable_bit = OMAP24XX_EN_GPT3_SHIFT, .init = &omap2_init_clksel_parent, @@ -1559,6 +1594,7 @@ static struct clk gpt4_ick = { .name = "gpt4_ick", .parent = &l4_ck, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP24XX_EN_GPT4_SHIFT, .recalc = &followparent_recalc, @@ -1568,6 +1604,7 @@ static struct clk gpt4_fck = { .name = "gpt4_fck", .parent = &func_32k_ck, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), .enable_bit = OMAP24XX_EN_GPT4_SHIFT, .init = &omap2_init_clksel_parent, @@ -1581,6 +1618,7 @@ static struct clk gpt5_ick = { .name = "gpt5_ick", .parent = &l4_ck, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP24XX_EN_GPT5_SHIFT, .recalc = &followparent_recalc, @@ -1590,6 +1628,7 @@ static struct clk gpt5_fck = { .name = "gpt5_fck", .parent = &func_32k_ck, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), .enable_bit = OMAP24XX_EN_GPT5_SHIFT, .init = &omap2_init_clksel_parent, @@ -1603,6 +1642,7 @@ static struct clk gpt6_ick = { .name = "gpt6_ick", .parent = &l4_ck, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP24XX_EN_GPT6_SHIFT, .recalc = &followparent_recalc, @@ -1612,6 +1652,7 @@ static struct clk gpt6_fck = { .name = "gpt6_fck", .parent = &func_32k_ck, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), .enable_bit = OMAP24XX_EN_GPT6_SHIFT, .init = &omap2_init_clksel_parent, @@ -1634,6 +1675,7 @@ static struct clk gpt7_fck = { .name = "gpt7_fck", .parent = &func_32k_ck, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), .enable_bit = OMAP24XX_EN_GPT7_SHIFT, .init = &omap2_init_clksel_parent, @@ -1647,6 +1689,7 @@ static struct clk gpt8_ick = { .name = "gpt8_ick", .parent = &l4_ck, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP24XX_EN_GPT8_SHIFT, .recalc = &followparent_recalc, @@ -1656,6 +1699,7 @@ static struct clk gpt8_fck = { .name = "gpt8_fck", .parent = &func_32k_ck, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), .enable_bit = OMAP24XX_EN_GPT8_SHIFT, .init = &omap2_init_clksel_parent, @@ -1669,6 +1713,7 @@ static struct clk gpt9_ick = { .name = "gpt9_ick", .parent = &l4_ck, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP24XX_EN_GPT9_SHIFT, .recalc = &followparent_recalc, @@ -1678,6 +1723,7 @@ static struct clk gpt9_fck = { .name = "gpt9_fck", .parent = &func_32k_ck, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), .enable_bit = OMAP24XX_EN_GPT9_SHIFT, .init = &omap2_init_clksel_parent, @@ -1691,6 +1737,7 @@ static struct clk gpt10_ick = { .name = "gpt10_ick", .parent = &l4_ck, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP24XX_EN_GPT10_SHIFT, .recalc = &followparent_recalc, @@ -1700,6 +1747,7 @@ static struct clk gpt10_fck = { .name = "gpt10_fck", .parent = &func_32k_ck, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), .enable_bit = OMAP24XX_EN_GPT10_SHIFT, .init = &omap2_init_clksel_parent, @@ -1713,6 +1761,7 @@ static struct clk gpt11_ick = { .name = "gpt11_ick", .parent = &l4_ck, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP24XX_EN_GPT11_SHIFT, .recalc = &followparent_recalc, @@ -1722,6 +1771,7 @@ static struct clk gpt11_fck = { .name = "gpt11_fck", .parent = &func_32k_ck, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), .enable_bit = OMAP24XX_EN_GPT11_SHIFT, .init = &omap2_init_clksel_parent, @@ -1735,6 +1785,7 @@ static struct clk gpt12_ick = { .name = "gpt12_ick", .parent = &l4_ck, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP24XX_EN_GPT12_SHIFT, .recalc = &followparent_recalc, @@ -1744,6 +1795,7 @@ static struct clk gpt12_fck = { .name = "gpt12_fck", .parent = &func_32k_ck, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), .enable_bit = OMAP24XX_EN_GPT12_SHIFT, .init = &omap2_init_clksel_parent, @@ -1758,6 +1810,7 @@ static struct clk mcbsp1_ick = { .id = 1, .parent = &l4_ck, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP24XX_EN_MCBSP1_SHIFT, .recalc = &followparent_recalc, @@ -1768,6 +1821,7 @@ static struct clk mcbsp1_fck = { .id = 1, .parent = &func_96m_ck, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), .enable_bit = OMAP24XX_EN_MCBSP1_SHIFT, .recalc = &followparent_recalc, @@ -1778,6 +1832,7 @@ static struct clk mcbsp2_ick = { .id = 2, .parent = &l4_ck, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP24XX_EN_MCBSP2_SHIFT, .recalc = &followparent_recalc, @@ -1788,6 +1843,7 @@ static struct clk mcbsp2_fck = { .id = 2, .parent = &func_96m_ck, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), .enable_bit = OMAP24XX_EN_MCBSP2_SHIFT, .recalc = &followparent_recalc, @@ -1798,6 +1854,7 @@ static struct clk mcbsp3_ick = { .id = 3, .parent = &l4_ck, .flags = CLOCK_IN_OMAP243X, + .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2), .enable_bit = OMAP2430_EN_MCBSP3_SHIFT, .recalc = &followparent_recalc, @@ -1808,6 +1865,7 @@ static struct clk mcbsp3_fck = { .id = 3, .parent = &func_96m_ck, .flags = CLOCK_IN_OMAP243X, + .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2), .enable_bit = OMAP2430_EN_MCBSP3_SHIFT, .recalc = &followparent_recalc, @@ -1818,6 +1876,7 @@ static struct clk mcbsp4_ick = { .id = 4, .parent = &l4_ck, .flags = CLOCK_IN_OMAP243X, + .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2), .enable_bit = OMAP2430_EN_MCBSP4_SHIFT, .recalc = &followparent_recalc, @@ -1828,6 +1887,7 @@ static struct clk mcbsp4_fck = { .id = 4, .parent = &func_96m_ck, .flags = CLOCK_IN_OMAP243X, + .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2), .enable_bit = OMAP2430_EN_MCBSP4_SHIFT, .recalc = &followparent_recalc, @@ -1838,6 +1898,7 @@ static struct clk mcbsp5_ick = { .id = 5, .parent = &l4_ck, .flags = CLOCK_IN_OMAP243X, + .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2), .enable_bit = OMAP2430_EN_MCBSP5_SHIFT, .recalc = &followparent_recalc, @@ -1848,6 +1909,7 @@ static struct clk mcbsp5_fck = { .id = 5, .parent = &func_96m_ck, .flags = CLOCK_IN_OMAP243X, + .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2), .enable_bit = OMAP2430_EN_MCBSP5_SHIFT, .recalc = &followparent_recalc, @@ -1857,6 +1919,7 @@ static struct clk mcspi1_ick = { .name = "mcspi_ick", .id = 1, .parent = &l4_ck, + .clkdm_name = "core_l4_clkdm", .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP24XX_EN_MCSPI1_SHIFT, @@ -1868,6 +1931,7 @@ static struct clk mcspi1_fck = { .id = 1, .parent = &func_48m_ck, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), .enable_bit = OMAP24XX_EN_MCSPI1_SHIFT, .recalc = &followparent_recalc, @@ -1878,6 +1942,7 @@ static struct clk mcspi2_ick = { .id = 2, .parent = &l4_ck, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP24XX_EN_MCSPI2_SHIFT, .recalc = &followparent_recalc, @@ -1888,6 +1953,7 @@ static struct clk mcspi2_fck = { .id = 2, .parent = &func_48m_ck, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), .enable_bit = OMAP24XX_EN_MCSPI2_SHIFT, .recalc = &followparent_recalc, @@ -1898,6 +1964,7 @@ static struct clk mcspi3_ick = { .id = 3, .parent = &l4_ck, .flags = CLOCK_IN_OMAP243X, + .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2), .enable_bit = OMAP2430_EN_MCSPI3_SHIFT, .recalc = &followparent_recalc, @@ -1908,6 +1975,7 @@ static struct clk mcspi3_fck = { .id = 3, .parent = &func_48m_ck, .flags = CLOCK_IN_OMAP243X, + .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2), .enable_bit = OMAP2430_EN_MCSPI3_SHIFT, .recalc = &followparent_recalc, @@ -1917,6 +1985,7 @@ static struct clk uart1_ick = { .name = "uart1_ick", .parent = &l4_ck, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP24XX_EN_UART1_SHIFT, .recalc = &followparent_recalc, @@ -1926,6 +1995,7 @@ static struct clk uart1_fck = { .name = "uart1_fck", .parent = &func_48m_ck, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), .enable_bit = OMAP24XX_EN_UART1_SHIFT, .recalc = &followparent_recalc, @@ -1935,6 +2005,7 @@ static struct clk uart2_ick = { .name = "uart2_ick", .parent = &l4_ck, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP24XX_EN_UART2_SHIFT, .recalc = &followparent_recalc, @@ -1944,6 +2015,7 @@ static struct clk uart2_fck = { .name = "uart2_fck", .parent = &func_48m_ck, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), .enable_bit = OMAP24XX_EN_UART2_SHIFT, .recalc = &followparent_recalc, @@ -1953,6 +2025,7 @@ static struct clk uart3_ick = { .name = "uart3_ick", .parent = &l4_ck, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2), .enable_bit = OMAP24XX_EN_UART3_SHIFT, .recalc = &followparent_recalc, @@ -1962,6 +2035,7 @@ static struct clk uart3_fck = { .name = "uart3_fck", .parent = &func_48m_ck, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2), .enable_bit = OMAP24XX_EN_UART3_SHIFT, .recalc = &followparent_recalc, @@ -1971,6 +2045,7 @@ static struct clk gpios_ick = { .name = "gpios_ick", .parent = &l4_ck, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN), .enable_bit = OMAP24XX_EN_GPIOS_SHIFT, .recalc = &followparent_recalc, @@ -1980,6 +2055,7 @@ static struct clk gpios_fck = { .name = "gpios_fck", .parent = &func_32k_ck, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .clkdm_name = "wkup_clkdm", .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN), .enable_bit = OMAP24XX_EN_GPIOS_SHIFT, .recalc = &followparent_recalc, @@ -1989,6 +2065,7 @@ static struct clk mpu_wdt_ick = { .name = "mpu_wdt_ick", .parent = &l4_ck, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN), .enable_bit = OMAP24XX_EN_MPU_WDT_SHIFT, .recalc = &followparent_recalc, @@ -1998,6 +2075,7 @@ static struct clk mpu_wdt_fck = { .name = "mpu_wdt_fck", .parent = &func_32k_ck, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .clkdm_name = "wkup_clkdm", .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN), .enable_bit = OMAP24XX_EN_MPU_WDT_SHIFT, .recalc = &followparent_recalc, @@ -2006,31 +2084,40 @@ static struct clk mpu_wdt_fck = { static struct clk sync_32k_ick = { .name = "sync_32k_ick", .parent = &l4_ck, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | ENABLE_ON_INIT, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | + ENABLE_ON_INIT, + .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN), .enable_bit = OMAP24XX_EN_32KSYNC_SHIFT, .recalc = &followparent_recalc, }; + static struct clk wdt1_ick = { .name = "wdt1_ick", .parent = &l4_ck, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN), .enable_bit = OMAP24XX_EN_WDT1_SHIFT, .recalc = &followparent_recalc, }; + static struct clk omapctrl_ick = { .name = "omapctrl_ick", .parent = &l4_ck, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | ENABLE_ON_INIT, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | + ENABLE_ON_INIT, + .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN), .enable_bit = OMAP24XX_EN_OMAPCTRL_SHIFT, .recalc = &followparent_recalc, }; + static struct clk icr_ick = { .name = "icr_ick", .parent = &l4_ck, .flags = CLOCK_IN_OMAP243X, + .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN), .enable_bit = OMAP2430_EN_ICR_SHIFT, .recalc = &followparent_recalc, @@ -2040,15 +2127,22 @@ static struct clk cam_ick = { .name = "cam_ick", .parent = &l4_ck, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP24XX_EN_CAM_SHIFT, .recalc = &followparent_recalc, }; +/* + * cam_fck controls both CAM_MCLK and CAM_FCLK. It should probably be + * split into two separate clocks, since the parent clocks are different + * and the clockdomains are also different. + */ static struct clk cam_fck = { .name = "cam_fck", .parent = &func_96m_ck, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .clkdm_name = "core_l3_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), .enable_bit = OMAP24XX_EN_CAM_SHIFT, .recalc = &followparent_recalc, @@ -2058,6 +2152,7 @@ static struct clk mailboxes_ick = { .name = "mailboxes_ick", .parent = &l4_ck, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP24XX_EN_MAILBOXES_SHIFT, .recalc = &followparent_recalc, @@ -2067,6 +2162,7 @@ static struct clk wdt4_ick = { .name = "wdt4_ick", .parent = &l4_ck, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP24XX_EN_WDT4_SHIFT, .recalc = &followparent_recalc, @@ -2076,6 +2172,7 @@ static struct clk wdt4_fck = { .name = "wdt4_fck", .parent = &func_32k_ck, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), .enable_bit = OMAP24XX_EN_WDT4_SHIFT, .recalc = &followparent_recalc, @@ -2085,6 +2182,7 @@ static struct clk wdt3_ick = { .name = "wdt3_ick", .parent = &l4_ck, .flags = CLOCK_IN_OMAP242X, + .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP2420_EN_WDT3_SHIFT, .recalc = &followparent_recalc, @@ -2094,6 +2192,7 @@ static struct clk wdt3_fck = { .name = "wdt3_fck", .parent = &func_32k_ck, .flags = CLOCK_IN_OMAP242X, + .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), .enable_bit = OMAP2420_EN_WDT3_SHIFT, .recalc = &followparent_recalc, @@ -2103,6 +2202,7 @@ static struct clk mspro_ick = { .name = "mspro_ick", .parent = &l4_ck, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP24XX_EN_MSPRO_SHIFT, .recalc = &followparent_recalc, @@ -2112,6 +2212,7 @@ static struct clk mspro_fck = { .name = "mspro_fck", .parent = &func_96m_ck, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), .enable_bit = OMAP24XX_EN_MSPRO_SHIFT, .recalc = &followparent_recalc, @@ -2121,6 +2222,7 @@ static struct clk mmc_ick = { .name = "mmc_ick", .parent = &l4_ck, .flags = CLOCK_IN_OMAP242X, + .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP2420_EN_MMC_SHIFT, .recalc = &followparent_recalc, @@ -2130,6 +2232,7 @@ static struct clk mmc_fck = { .name = "mmc_fck", .parent = &func_96m_ck, .flags = CLOCK_IN_OMAP242X, + .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), .enable_bit = OMAP2420_EN_MMC_SHIFT, .recalc = &followparent_recalc, @@ -2139,6 +2242,7 @@ static struct clk fac_ick = { .name = "fac_ick", .parent = &l4_ck, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP24XX_EN_FAC_SHIFT, .recalc = &followparent_recalc, @@ -2148,6 +2252,7 @@ static struct clk fac_fck = { .name = "fac_fck", .parent = &func_12m_ck, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), .enable_bit = OMAP24XX_EN_FAC_SHIFT, .recalc = &followparent_recalc, @@ -2157,6 +2262,7 @@ static struct clk eac_ick = { .name = "eac_ick", .parent = &l4_ck, .flags = CLOCK_IN_OMAP242X, + .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP2420_EN_EAC_SHIFT, .recalc = &followparent_recalc, @@ -2166,6 +2272,7 @@ static struct clk eac_fck = { .name = "eac_fck", .parent = &func_96m_ck, .flags = CLOCK_IN_OMAP242X, + .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), .enable_bit = OMAP2420_EN_EAC_SHIFT, .recalc = &followparent_recalc, @@ -2175,6 +2282,7 @@ static struct clk hdq_ick = { .name = "hdq_ick", .parent = &l4_ck, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP24XX_EN_HDQ_SHIFT, .recalc = &followparent_recalc, @@ -2184,6 +2292,7 @@ static struct clk hdq_fck = { .name = "hdq_fck", .parent = &func_12m_ck, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), .enable_bit = OMAP24XX_EN_HDQ_SHIFT, .recalc = &followparent_recalc, @@ -2194,6 +2303,7 @@ static struct clk i2c2_ick = { .id = 2, .parent = &l4_ck, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP2420_EN_I2C2_SHIFT, .recalc = &followparent_recalc, @@ -2204,6 +2314,7 @@ static struct clk i2c2_fck = { .id = 2, .parent = &func_12m_ck, .flags = CLOCK_IN_OMAP242X, + .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), .enable_bit = OMAP2420_EN_I2C2_SHIFT, .recalc = &followparent_recalc, @@ -2214,6 +2325,7 @@ static struct clk i2chs2_fck = { .id = 2, .parent = &func_96m_ck, .flags = CLOCK_IN_OMAP243X, + .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2), .enable_bit = OMAP2430_EN_I2CHS2_SHIFT, .recalc = &followparent_recalc, @@ -2224,6 +2336,7 @@ static struct clk i2c1_ick = { .id = 1, .parent = &l4_ck, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP2420_EN_I2C1_SHIFT, .recalc = &followparent_recalc, @@ -2234,6 +2347,7 @@ static struct clk i2c1_fck = { .id = 1, .parent = &func_12m_ck, .flags = CLOCK_IN_OMAP242X, + .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), .enable_bit = OMAP2420_EN_I2C1_SHIFT, .recalc = &followparent_recalc, @@ -2244,6 +2358,7 @@ static struct clk i2chs1_fck = { .id = 1, .parent = &func_96m_ck, .flags = CLOCK_IN_OMAP243X, + .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2), .enable_bit = OMAP2430_EN_I2CHS1_SHIFT, .recalc = &followparent_recalc, @@ -2252,7 +2367,9 @@ static struct clk i2chs1_fck = { static struct clk gpmc_fck = { .name = "gpmc_fck", .parent = &core_l3_ck, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | ENABLE_ON_INIT, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | + ENABLE_ON_INIT, + .clkdm_name = "core_l3_clkdm", .recalc = &followparent_recalc, }; @@ -2260,6 +2377,7 @@ static struct clk sdma_fck = { .name = "sdma_fck", .parent = &core_l3_ck, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .clkdm_name = "core_l3_clkdm", .recalc = &followparent_recalc, }; @@ -2267,6 +2385,7 @@ static struct clk sdma_ick = { .name = "sdma_ick", .parent = &l4_ck, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .clkdm_name = "core_l3_clkdm", .recalc = &followparent_recalc, }; @@ -2274,6 +2393,7 @@ static struct clk vlynq_ick = { .name = "vlynq_ick", .parent = &core_l3_ck, .flags = CLOCK_IN_OMAP242X, + .clkdm_name = "core_l3_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP2420_EN_VLYNQ_SHIFT, .recalc = &followparent_recalc, @@ -2308,6 +2428,7 @@ static struct clk vlynq_fck = { .name = "vlynq_fck", .parent = &func_96m_ck, .flags = CLOCK_IN_OMAP242X | DELAYED_APP, + .clkdm_name = "core_l3_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), .enable_bit = OMAP2420_EN_VLYNQ_SHIFT, .init = &omap2_init_clksel_parent, @@ -2323,6 +2444,7 @@ static struct clk sdrc_ick = { .name = "sdrc_ick", .parent = &l4_ck, .flags = CLOCK_IN_OMAP243X | ENABLE_ON_INIT, + .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN3), .enable_bit = OMAP2430_EN_SDRC_SHIFT, .recalc = &followparent_recalc, @@ -2332,6 +2454,7 @@ static struct clk des_ick = { .name = "des_ick", .parent = &l4_ck, .flags = CLOCK_IN_OMAP243X | CLOCK_IN_OMAP242X, + .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_ICLKEN4), .enable_bit = OMAP24XX_EN_DES_SHIFT, .recalc = &followparent_recalc, @@ -2341,6 +2464,7 @@ static struct clk sha_ick = { .name = "sha_ick", .parent = &l4_ck, .flags = CLOCK_IN_OMAP243X | CLOCK_IN_OMAP242X, + .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_ICLKEN4), .enable_bit = OMAP24XX_EN_SHA_SHIFT, .recalc = &followparent_recalc, @@ -2350,6 +2474,7 @@ static struct clk rng_ick = { .name = "rng_ick", .parent = &l4_ck, .flags = CLOCK_IN_OMAP243X | CLOCK_IN_OMAP242X, + .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_ICLKEN4), .enable_bit = OMAP24XX_EN_RNG_SHIFT, .recalc = &followparent_recalc, @@ -2359,6 +2484,7 @@ static struct clk aes_ick = { .name = "aes_ick", .parent = &l4_ck, .flags = CLOCK_IN_OMAP243X | CLOCK_IN_OMAP242X, + .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_ICLKEN4), .enable_bit = OMAP24XX_EN_AES_SHIFT, .recalc = &followparent_recalc, @@ -2368,6 +2494,7 @@ static struct clk pka_ick = { .name = "pka_ick", .parent = &l4_ck, .flags = CLOCK_IN_OMAP243X | CLOCK_IN_OMAP242X, + .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_ICLKEN4), .enable_bit = OMAP24XX_EN_PKA_SHIFT, .recalc = &followparent_recalc, @@ -2377,6 +2504,7 @@ static struct clk usb_fck = { .name = "usb_fck", .parent = &func_48m_ck, .flags = CLOCK_IN_OMAP243X | CLOCK_IN_OMAP242X, + .clkdm_name = "core_l3_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2), .enable_bit = OMAP24XX_EN_USB_SHIFT, .recalc = &followparent_recalc, @@ -2386,6 +2514,7 @@ static struct clk usbhs_ick = { .name = "usbhs_ick", .parent = &core_l3_ck, .flags = CLOCK_IN_OMAP243X, + .clkdm_name = "core_l3_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2), .enable_bit = OMAP2430_EN_USBHS_SHIFT, .recalc = &followparent_recalc, @@ -2396,6 +2525,7 @@ static struct clk mmchs1_ick = { .id = 1, .parent = &l4_ck, .flags = CLOCK_IN_OMAP243X, + .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2), .enable_bit = OMAP2430_EN_MMCHS1_SHIFT, .recalc = &followparent_recalc, @@ -2406,6 +2536,7 @@ static struct clk mmchs1_fck = { .id = 1, .parent = &func_96m_ck, .flags = CLOCK_IN_OMAP243X, + .clkdm_name = "core_l3_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2), .enable_bit = OMAP2430_EN_MMCHS1_SHIFT, .recalc = &followparent_recalc, @@ -2416,6 +2547,7 @@ static struct clk mmchs2_ick = { .id = 2, .parent = &l4_ck, .flags = CLOCK_IN_OMAP243X, + .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2), .enable_bit = OMAP2430_EN_MMCHS2_SHIFT, .recalc = &followparent_recalc, @@ -2435,6 +2567,7 @@ static struct clk gpio5_ick = { .name = "gpio5_ick", .parent = &l4_ck, .flags = CLOCK_IN_OMAP243X, + .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2), .enable_bit = OMAP2430_EN_GPIO5_SHIFT, .recalc = &followparent_recalc, @@ -2444,6 +2577,7 @@ static struct clk gpio5_fck = { .name = "gpio5_fck", .parent = &func_32k_ck, .flags = CLOCK_IN_OMAP243X, + .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2), .enable_bit = OMAP2430_EN_GPIO5_SHIFT, .recalc = &followparent_recalc, @@ -2453,6 +2587,7 @@ static struct clk mdm_intc_ick = { .name = "mdm_intc_ick", .parent = &l4_ck, .flags = CLOCK_IN_OMAP243X, + .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2), .enable_bit = OMAP2430_EN_MDM_INTC_SHIFT, .recalc = &followparent_recalc, @@ -2463,6 +2598,7 @@ static struct clk mmchsdb1_fck = { .id = 1, .parent = &func_32k_ck, .flags = CLOCK_IN_OMAP243X, + .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2), .enable_bit = OMAP2430_EN_MMCHSDB1_SHIFT, .recalc = &followparent_recalc, @@ -2473,6 +2609,7 @@ static struct clk mmchsdb2_fck = { .id = 2, .parent = &func_32k_ck, .flags = CLOCK_IN_OMAP243X, + .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2), .enable_bit = OMAP2430_EN_MMCHSDB2_SHIFT, .recalc = &followparent_recalc, @@ -2551,7 +2688,6 @@ static struct clk *onchip_24xx_clks[] __initdata = { &usb_l4_ick, /* L4 domain clocks */ &l4_ck, /* used as both core_l4 and wu_l4 */ - &ssi_l4_ick, /* virtual meta-group clock */ &virt_prcm_set, /* general l4 interface ck, multi-parent functional clk */ diff --git a/arch/arm/plat-omap/include/mach/clock.h b/arch/arm/plat-omap/include/mach/clock.h index 92f7c7238fc..719298554ed 100644 --- a/arch/arm/plat-omap/include/mach/clock.h +++ b/arch/arm/plat-omap/include/mach/clock.h @@ -15,6 +15,7 @@ struct module; struct clk; +struct clockdomain; #if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) @@ -79,6 +80,8 @@ struct clk { u32 clksel_mask; const struct clksel *clksel; struct dpll_data *dpll_data; + const char *clkdm_name; + struct clockdomain *clkdm; #else __u8 rate_offset; __u8 src_offset; -- cgit v1.2.3-70-g09d2 From 333943ba9e1716a3751af82f2dcc7620b83091ed Mon Sep 17 00:00:00 2001 From: Paul Walmsley Date: Tue, 19 Aug 2008 11:08:45 +0300 Subject: ARM: OMAP2: Clockdomain: Integrate OMAP3 clocks with clockdomain code This patch integrates the OMAP3 clock tree with the clockdomain code. This patch: - marks OMAP34xx clocks with their corresponding clockdomain. - adds code to convert the clockdomain name to a clockdomain pointer in the struct clk during clk_register(). - modifies OMAP2 clock usecounting to call into the clockdomain code when clocks are enabled or disabled. Signed-off-by: Paul Walmsley Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/clock.c | 46 ++++++++- arch/arm/mach-omap2/clock.h | 1 + arch/arm/mach-omap2/clock34xx.c | 4 +- arch/arm/mach-omap2/clock34xx.h | 196 +++++++++++++++++++++++++++++++++---- arch/arm/mach-omap2/clockdomains.h | 9 +- 5 files changed, 232 insertions(+), 24 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c index 1d891e4a693..aa9b37370d4 100644 --- a/arch/arm/mach-omap2/clock.c +++ b/arch/arm/mach-omap2/clock.c @@ -26,6 +26,7 @@ #include #include +#include #include #include #include @@ -62,9 +63,35 @@ u8 cpu_mask; /*------------------------------------------------------------------------- - * Omap2 specific clock functions + * OMAP2/3 specific clock functions *-------------------------------------------------------------------------*/ +/** + * omap2_init_clk_clkdm - look up a clockdomain name, store pointer in clk + * @clk: OMAP clock struct ptr to use + * + * Convert a clockdomain name stored in a struct clk 'clk' into a + * clockdomain pointer, and save it into the struct clk. Intended to be + * called during clk_register(). No return value. + */ +void omap2_init_clk_clkdm(struct clk *clk) +{ + struct clockdomain *clkdm; + + if (!clk->clkdm_name) + return; + + clkdm = clkdm_lookup(clk->clkdm_name); + if (clkdm) { + pr_debug("clock: associated clk %s to clkdm %s\n", + clk->name, clk->clkdm_name); + clk->clkdm = clkdm; + } else { + pr_debug("clock: could not associate clk %s to " + "clkdm %s\n", clk->name, clk->clkdm_name); + } +} + /** * omap2_init_clksel_parent - set a clksel clk's parent field from the hardware * @clk: OMAP clock struct ptr to use @@ -308,6 +335,9 @@ void omap2_clk_disable(struct clk *clk) _omap2_clk_disable(clk); if (likely((u32)clk->parent)) omap2_clk_disable(clk->parent); + if (clk->clkdm) + omap2_clkdm_clk_disable(clk->clkdm, clk); + } } @@ -324,11 +354,19 @@ int omap2_clk_enable(struct clk *clk) return ret; } + if (clk->clkdm) + omap2_clkdm_clk_enable(clk->clkdm, clk); + ret = _omap2_clk_enable(clk); - if (unlikely(ret != 0) && clk->parent) { - omap2_clk_disable(clk->parent); - clk->usecount--; + if (unlikely(ret != 0)) { + if (clk->clkdm) + omap2_clkdm_clk_disable(clk->clkdm, clk); + + if (clk->parent) { + omap2_clk_disable(clk->parent); + clk->usecount--; + } } } diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h index 626e5fa93b6..ea55f286f47 100644 --- a/arch/arm/mach-omap2/clock.h +++ b/arch/arm/mach-omap2/clock.h @@ -36,6 +36,7 @@ void omap2_clk_disable_unused(struct clk *clk); #endif void omap2_clksel_recalc(struct clk *clk); +void omap2_init_clk_clkdm(struct clk *clk); void omap2_init_clksel_parent(struct clk *clk); u32 omap2_clksel_get_divisor(struct clk *clk); u32 omap2_clksel_round_rate_div(struct clk *clk, unsigned long target_rate, diff --git a/arch/arm/mach-omap2/clock34xx.c b/arch/arm/mach-omap2/clock34xx.c index dff7a72fefc..0bf661df664 100644 --- a/arch/arm/mach-omap2/clock34xx.c +++ b/arch/arm/mach-omap2/clock34xx.c @@ -489,8 +489,10 @@ int __init omap2_clk_init(void) for (clkp = onchip_34xx_clks; clkp < onchip_34xx_clks + ARRAY_SIZE(onchip_34xx_clks); clkp++) { - if ((*clkp)->flags & cpu_clkflg) + if ((*clkp)->flags & cpu_clkflg) { clk_register(*clkp); + omap2_init_clk_clkdm(*clkp); + } } /* REVISIT: Not yet ready for OMAP3 */ diff --git a/arch/arm/mach-omap2/clock34xx.h b/arch/arm/mach-omap2/clock34xx.h index ec664457a11..bb01e201481 100644 --- a/arch/arm/mach-omap2/clock34xx.h +++ b/arch/arm/mach-omap2/clock34xx.h @@ -478,7 +478,7 @@ static struct clk dpll3_m2_ck = { }; static const struct clksel core_ck_clksel[] = { - { .parent = &sys_ck, .rates = dpll_bypass_rates }, + { .parent = &sys_ck, .rates = dpll_bypass_rates }, { .parent = &dpll3_m2_ck, .rates = dpll_locked_rates }, { .parent = NULL } }; @@ -495,7 +495,7 @@ static struct clk core_ck = { }; static const struct clksel dpll3_m2x2_ck_clksel[] = { - { .parent = &sys_ck, .rates = dpll_bypass_rates }, + { .parent = &sys_ck, .rates = dpll_bypass_rates }, { .parent = &dpll3_x2_ck, .rates = dpll_locked_rates }, { .parent = NULL } }; @@ -541,7 +541,7 @@ static struct clk dpll3_m3x2_ck = { }; static const struct clksel emu_core_alwon_ck_clksel[] = { - { .parent = &sys_ck, .rates = dpll_bypass_rates }, + { .parent = &sys_ck, .rates = dpll_bypass_rates }, { .parent = &dpll3_m3x2_ck, .rates = dpll_locked_rates }, { .parent = NULL } }; @@ -633,7 +633,7 @@ static struct clk dpll4_m2x2_ck = { }; static const struct clksel omap_96m_alwon_fck_clksel[] = { - { .parent = &sys_ck, .rates = dpll_bypass_rates }, + { .parent = &sys_ck, .rates = dpll_bypass_rates }, { .parent = &dpll4_m2x2_ck, .rates = dpll_locked_rates }, { .parent = NULL } }; @@ -659,7 +659,7 @@ static struct clk omap_96m_fck = { }; static const struct clksel cm_96m_fck_clksel[] = { - { .parent = &sys_ck, .rates = dpll_bypass_rates }, + { .parent = &sys_ck, .rates = dpll_bypass_rates }, { .parent = &dpll4_m2x2_ck, .rates = dpll_locked_rates }, { .parent = NULL } }; @@ -701,7 +701,7 @@ static struct clk dpll4_m3x2_ck = { }; static const struct clksel virt_omap_54m_fck_clksel[] = { - { .parent = &sys_ck, .rates = dpll_bypass_rates }, + { .parent = &sys_ck, .rates = dpll_bypass_rates }, { .parent = &dpll4_m3x2_ck, .rates = dpll_locked_rates }, { .parent = NULL } }; @@ -911,7 +911,7 @@ static struct clk dpll5_m2_ck = { }; static const struct clksel omap_120m_fck_clksel[] = { - { .parent = &sys_ck, .rates = dpll_bypass_rates }, + { .parent = &sys_ck, .rates = dpll_bypass_rates }, { .parent = &dpll5_m2_ck, .rates = dpll_locked_rates }, { .parent = NULL } }; @@ -919,13 +919,13 @@ static const struct clksel omap_120m_fck_clksel[] = { static struct clk omap_120m_fck = { .name = "omap_120m_fck", .parent = &dpll5_m2_ck, - .init = &omap2_init_clksel_parent, - .clksel_reg = OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST2), - .clksel_mask = OMAP3430ES2_ST_PERIPH2_CLK_MASK, - .clksel = omap_120m_fck_clksel, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST2), + .clksel_mask = OMAP3430ES2_ST_PERIPH2_CLK_MASK, + .clksel = omap_120m_fck_clksel, .flags = CLOCK_IN_OMAP3430ES2 | RATE_PROPAGATES | PARENT_CONTROLS_CLOCK, - .recalc = &omap2_clksel_recalc, + .recalc = &omap2_clksel_recalc, }; /* CM EXTERNAL CLOCK OUTPUTS */ @@ -1034,7 +1034,7 @@ static struct clk dpll1_fck = { * called 'dpll1_fck' */ static const struct clksel mpu_clksel[] = { - { .parent = &dpll1_fck, .rates = dpll_bypass_rates }, + { .parent = &dpll1_fck, .rates = dpll_bypass_rates }, { .parent = &dpll1_x2m2_ck, .rates = dpll_locked_rates }, { .parent = NULL } }; @@ -1048,6 +1048,7 @@ static struct clk mpu_ck = { .clksel = mpu_clksel, .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | PARENT_CONTROLS_CLOCK, + .clkdm_name = "mpu_clkdm", .recalc = &omap2_clksel_recalc, }; @@ -1075,6 +1076,8 @@ static struct clk arm_fck = { .recalc = &omap2_clksel_recalc, }; +/* XXX What about neon_clkdm ? */ + /* * REVISIT: This clock is never specifically defined in the 3430 TRM, * although it is referenced - so this is a guess @@ -1107,7 +1110,7 @@ static struct clk dpll2_fck = { */ static const struct clksel iva2_clksel[] = { - { .parent = &dpll2_fck, .rates = dpll_bypass_rates }, + { .parent = &dpll2_fck, .rates = dpll_bypass_rates }, { .parent = &dpll2_m2_ck, .rates = dpll_locked_rates }, { .parent = NULL } }; @@ -1123,6 +1126,7 @@ static struct clk iva2_ck = { .clksel_mask = OMAP3430_ST_IVA2_CLK_MASK, .clksel = iva2_clksel, .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES, + .clkdm_name = "iva2_clkdm", .recalc = &omap2_clksel_recalc, }; @@ -1137,6 +1141,7 @@ static struct clk l3_ick = { .clksel = div2_core_clksel, .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | PARENT_CONTROLS_CLOCK, + .clkdm_name = "core_l3_clkdm", .recalc = &omap2_clksel_recalc, }; @@ -1154,6 +1159,7 @@ static struct clk l4_ick = { .clksel = div2_l3_clksel, .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | PARENT_CONTROLS_CLOCK, + .clkdm_name = "core_l4_clkdm", .recalc = &omap2_clksel_recalc, }; @@ -1193,33 +1199,40 @@ static struct clk gfx_l3_fck = { .clksel_mask = OMAP_CLKSEL_GFX_MASK, .clksel = gfx_l3_clksel, .flags = CLOCK_IN_OMAP3430ES1 | RATE_PROPAGATES, + .clkdm_name = "gfx_3430es1_clkdm", .recalc = &omap2_clksel_recalc, }; static struct clk gfx_l3_ick = { .name = "gfx_l3_ick", .parent = &l3_ick, + .init = &omap2_init_clk_clkdm, .enable_reg = OMAP_CM_REGADDR(GFX_MOD, CM_ICLKEN), .enable_bit = OMAP_EN_GFX_SHIFT, .flags = CLOCK_IN_OMAP3430ES1, + .clkdm_name = "gfx_3430es1_clkdm", .recalc = &followparent_recalc, }; static struct clk gfx_cg1_ck = { .name = "gfx_cg1_ck", .parent = &gfx_l3_fck, /* REVISIT: correct? */ + .init = &omap2_init_clk_clkdm, .enable_reg = OMAP_CM_REGADDR(GFX_MOD, CM_FCLKEN), .enable_bit = OMAP3430ES1_EN_2D_SHIFT, .flags = CLOCK_IN_OMAP3430ES1, + .clkdm_name = "gfx_3430es1_clkdm", .recalc = &followparent_recalc, }; static struct clk gfx_cg2_ck = { .name = "gfx_cg2_ck", .parent = &gfx_l3_fck, /* REVISIT: correct? */ + .init = &omap2_init_clk_clkdm, .enable_reg = OMAP_CM_REGADDR(GFX_MOD, CM_FCLKEN), .enable_bit = OMAP3430ES1_EN_3D_SHIFT, .flags = CLOCK_IN_OMAP3430ES1, + .clkdm_name = "gfx_3430es1_clkdm", .recalc = &followparent_recalc, }; @@ -1252,15 +1265,18 @@ static struct clk sgx_fck = { .clksel_mask = OMAP3430ES2_CLKSEL_SGX_MASK, .clksel = sgx_clksel, .flags = CLOCK_IN_OMAP3430ES2, + .clkdm_name = "sgx_clkdm", .recalc = &omap2_clksel_recalc, }; static struct clk sgx_ick = { .name = "sgx_ick", .parent = &l3_ick, + .init = &omap2_init_clk_clkdm, .enable_reg = OMAP_CM_REGADDR(OMAP3430ES2_SGX_MOD, CM_ICLKEN), .enable_bit = OMAP3430ES2_EN_SGX_SHIFT, .flags = CLOCK_IN_OMAP3430ES2, + .clkdm_name = "sgx_clkdm", .recalc = &followparent_recalc, }; @@ -1269,9 +1285,11 @@ static struct clk sgx_ick = { static struct clk d2d_26m_fck = { .name = "d2d_26m_fck", .parent = &sys_ck, + .init = &omap2_init_clk_clkdm, .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), .enable_bit = OMAP3430ES1_EN_D2D_SHIFT, .flags = CLOCK_IN_OMAP3430ES1, + .clkdm_name = "d2d_clkdm", .recalc = &followparent_recalc, }; @@ -1291,6 +1309,7 @@ static struct clk gpt10_fck = { .clksel_mask = OMAP3430_CLKSEL_GPT10_MASK, .clksel = omap343x_gpt_clksel, .flags = CLOCK_IN_OMAP343X, + .clkdm_name = "core_l4_clkdm", .recalc = &omap2_clksel_recalc, }; @@ -1304,6 +1323,7 @@ static struct clk gpt11_fck = { .clksel_mask = OMAP3430_CLKSEL_GPT11_MASK, .clksel = omap343x_gpt_clksel, .flags = CLOCK_IN_OMAP343X, + .clkdm_name = "core_l4_clkdm", .recalc = &omap2_clksel_recalc, }; @@ -1341,6 +1361,7 @@ static struct clk core_96m_fck = { .parent = &omap_96m_fck, .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | PARENT_CONTROLS_CLOCK, + .clkdm_name = "core_l4_clkdm", .recalc = &followparent_recalc, }; @@ -1351,6 +1372,7 @@ static struct clk mmchs3_fck = { .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), .enable_bit = OMAP3430ES2_EN_MMC3_SHIFT, .flags = CLOCK_IN_OMAP3430ES2, + .clkdm_name = "core_l4_clkdm", .recalc = &followparent_recalc, }; @@ -1361,6 +1383,7 @@ static struct clk mmchs2_fck = { .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), .enable_bit = OMAP3430_EN_MMC2_SHIFT, .flags = CLOCK_IN_OMAP343X, + .clkdm_name = "core_l4_clkdm", .recalc = &followparent_recalc, }; @@ -1370,6 +1393,7 @@ static struct clk mspro_fck = { .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), .enable_bit = OMAP3430_EN_MSPRO_SHIFT, .flags = CLOCK_IN_OMAP343X, + .clkdm_name = "core_l4_clkdm", .recalc = &followparent_recalc, }; @@ -1380,6 +1404,7 @@ static struct clk mmchs1_fck = { .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), .enable_bit = OMAP3430_EN_MMC1_SHIFT, .flags = CLOCK_IN_OMAP343X, + .clkdm_name = "core_l4_clkdm", .recalc = &followparent_recalc, }; @@ -1390,16 +1415,18 @@ static struct clk i2c3_fck = { .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), .enable_bit = OMAP3430_EN_I2C3_SHIFT, .flags = CLOCK_IN_OMAP343X, + .clkdm_name = "core_l4_clkdm", .recalc = &followparent_recalc, }; static struct clk i2c2_fck = { .name = "i2c_fck", - .id = 2, + .id = 2, .parent = &core_96m_fck, .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), .enable_bit = OMAP3430_EN_I2C2_SHIFT, .flags = CLOCK_IN_OMAP343X, + .clkdm_name = "core_l4_clkdm", .recalc = &followparent_recalc, }; @@ -1410,6 +1437,7 @@ static struct clk i2c1_fck = { .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), .enable_bit = OMAP3430_EN_I2C1_SHIFT, .flags = CLOCK_IN_OMAP343X, + .clkdm_name = "core_l4_clkdm", .recalc = &followparent_recalc, }; @@ -1443,6 +1471,7 @@ static struct clk mcbsp5_fck = { .clksel_mask = OMAP2_MCBSP5_CLKS_MASK, .clksel = mcbsp_15_clksel, .flags = CLOCK_IN_OMAP343X, + .clkdm_name = "core_l4_clkdm", .recalc = &omap2_clksel_recalc, }; @@ -1456,6 +1485,7 @@ static struct clk mcbsp1_fck = { .clksel_mask = OMAP2_MCBSP1_CLKS_MASK, .clksel = mcbsp_15_clksel, .flags = CLOCK_IN_OMAP343X, + .clkdm_name = "core_l4_clkdm", .recalc = &omap2_clksel_recalc, }; @@ -1466,6 +1496,7 @@ static struct clk core_48m_fck = { .parent = &omap_48m_fck, .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | PARENT_CONTROLS_CLOCK, + .clkdm_name = "core_l4_clkdm", .recalc = &followparent_recalc, }; @@ -1543,6 +1574,7 @@ static struct clk core_12m_fck = { .parent = &omap_12m_fck, .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | PARENT_CONTROLS_CLOCK, + .clkdm_name = "core_l4_clkdm", .recalc = &followparent_recalc, }; @@ -1581,6 +1613,7 @@ static struct clk ssi_ssr_fck = { .clksel_mask = OMAP3430_CLKSEL_SSI_MASK, .clksel = ssi_ssr_clksel, .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES, + .clkdm_name = "core_l4_clkdm", .recalc = &omap2_clksel_recalc, }; @@ -1596,11 +1629,17 @@ static struct clk ssi_sst_fck = { /* CORE_L3_ICK based clocks */ +/* + * XXX must add clk_enable/clk_disable for these if standard code won't + * handle it + */ static struct clk core_l3_ick = { .name = "core_l3_ick", .parent = &l3_ick, + .init = &omap2_init_clk_clkdm, .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | PARENT_CONTROLS_CLOCK, + .clkdm_name = "core_l3_clkdm", .recalc = &followparent_recalc, }; @@ -1610,6 +1649,7 @@ static struct clk hsotgusb_ick = { .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP3430_EN_HSOTGUSB_SHIFT, .flags = CLOCK_IN_OMAP343X, + .clkdm_name = "core_l3_clkdm", .recalc = &followparent_recalc, }; @@ -1619,6 +1659,7 @@ static struct clk sdrc_ick = { .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP3430_EN_SDRC_SHIFT, .flags = CLOCK_IN_OMAP343X | ENABLE_ON_INIT, + .clkdm_name = "core_l3_clkdm", .recalc = &followparent_recalc, }; @@ -1627,6 +1668,7 @@ static struct clk gpmc_fck = { .parent = &core_l3_ick, .flags = CLOCK_IN_OMAP343X | PARENT_CONTROLS_CLOCK | ENABLE_ON_INIT, + .clkdm_name = "core_l3_clkdm", .recalc = &followparent_recalc, }; @@ -1654,8 +1696,10 @@ static struct clk pka_ick = { static struct clk core_l4_ick = { .name = "core_l4_ick", .parent = &l4_ick, + .init = &omap2_init_clk_clkdm, .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | PARENT_CONTROLS_CLOCK, + .clkdm_name = "core_l4_clkdm", .recalc = &followparent_recalc, }; @@ -1665,6 +1709,7 @@ static struct clk usbtll_ick = { .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN3), .enable_bit = OMAP3430ES2_EN_USBTLL_SHIFT, .flags = CLOCK_IN_OMAP3430ES2, + .clkdm_name = "core_l4_clkdm", .recalc = &followparent_recalc, }; @@ -1675,6 +1720,7 @@ static struct clk mmchs3_ick = { .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP3430ES2_EN_MMC3_SHIFT, .flags = CLOCK_IN_OMAP3430ES2, + .clkdm_name = "core_l4_clkdm", .recalc = &followparent_recalc, }; @@ -1685,6 +1731,7 @@ static struct clk icr_ick = { .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP3430_EN_ICR_SHIFT, .flags = CLOCK_IN_OMAP343X, + .clkdm_name = "core_l4_clkdm", .recalc = &followparent_recalc, }; @@ -1694,6 +1741,7 @@ static struct clk aes2_ick = { .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP3430_EN_AES2_SHIFT, .flags = CLOCK_IN_OMAP343X, + .clkdm_name = "core_l4_clkdm", .recalc = &followparent_recalc, }; @@ -1703,6 +1751,7 @@ static struct clk sha12_ick = { .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP3430_EN_SHA12_SHIFT, .flags = CLOCK_IN_OMAP343X, + .clkdm_name = "core_l4_clkdm", .recalc = &followparent_recalc, }; @@ -1712,6 +1761,7 @@ static struct clk des2_ick = { .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP3430_EN_DES2_SHIFT, .flags = CLOCK_IN_OMAP343X, + .clkdm_name = "core_l4_clkdm", .recalc = &followparent_recalc, }; @@ -1722,6 +1772,7 @@ static struct clk mmchs2_ick = { .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP3430_EN_MMC2_SHIFT, .flags = CLOCK_IN_OMAP343X, + .clkdm_name = "core_l4_clkdm", .recalc = &followparent_recalc, }; @@ -1732,6 +1783,7 @@ static struct clk mmchs1_ick = { .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP3430_EN_MMC1_SHIFT, .flags = CLOCK_IN_OMAP343X, + .clkdm_name = "core_l4_clkdm", .recalc = &followparent_recalc, }; @@ -1741,6 +1793,7 @@ static struct clk mspro_ick = { .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP3430_EN_MSPRO_SHIFT, .flags = CLOCK_IN_OMAP343X, + .clkdm_name = "core_l4_clkdm", .recalc = &followparent_recalc, }; @@ -1750,6 +1803,7 @@ static struct clk hdq_ick = { .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP3430_EN_HDQ_SHIFT, .flags = CLOCK_IN_OMAP343X, + .clkdm_name = "core_l4_clkdm", .recalc = &followparent_recalc, }; @@ -1760,6 +1814,7 @@ static struct clk mcspi4_ick = { .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP3430_EN_MCSPI4_SHIFT, .flags = CLOCK_IN_OMAP343X, + .clkdm_name = "core_l4_clkdm", .recalc = &followparent_recalc, }; @@ -1770,6 +1825,7 @@ static struct clk mcspi3_ick = { .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP3430_EN_MCSPI3_SHIFT, .flags = CLOCK_IN_OMAP343X, + .clkdm_name = "core_l4_clkdm", .recalc = &followparent_recalc, }; @@ -1780,6 +1836,7 @@ static struct clk mcspi2_ick = { .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP3430_EN_MCSPI2_SHIFT, .flags = CLOCK_IN_OMAP343X, + .clkdm_name = "core_l4_clkdm", .recalc = &followparent_recalc, }; @@ -1790,6 +1847,7 @@ static struct clk mcspi1_ick = { .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP3430_EN_MCSPI1_SHIFT, .flags = CLOCK_IN_OMAP343X, + .clkdm_name = "core_l4_clkdm", .recalc = &followparent_recalc, }; @@ -1800,6 +1858,7 @@ static struct clk i2c3_ick = { .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP3430_EN_I2C3_SHIFT, .flags = CLOCK_IN_OMAP343X, + .clkdm_name = "core_l4_clkdm", .recalc = &followparent_recalc, }; @@ -1810,6 +1869,7 @@ static struct clk i2c2_ick = { .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP3430_EN_I2C2_SHIFT, .flags = CLOCK_IN_OMAP343X, + .clkdm_name = "core_l4_clkdm", .recalc = &followparent_recalc, }; @@ -1820,6 +1880,7 @@ static struct clk i2c1_ick = { .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP3430_EN_I2C1_SHIFT, .flags = CLOCK_IN_OMAP343X, + .clkdm_name = "core_l4_clkdm", .recalc = &followparent_recalc, }; @@ -1829,6 +1890,7 @@ static struct clk uart2_ick = { .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP3430_EN_UART2_SHIFT, .flags = CLOCK_IN_OMAP343X, + .clkdm_name = "core_l4_clkdm", .recalc = &followparent_recalc, }; @@ -1838,6 +1900,7 @@ static struct clk uart1_ick = { .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP3430_EN_UART1_SHIFT, .flags = CLOCK_IN_OMAP343X, + .clkdm_name = "core_l4_clkdm", .recalc = &followparent_recalc, }; @@ -1847,6 +1910,7 @@ static struct clk gpt11_ick = { .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP3430_EN_GPT11_SHIFT, .flags = CLOCK_IN_OMAP343X, + .clkdm_name = "core_l4_clkdm", .recalc = &followparent_recalc, }; @@ -1856,6 +1920,7 @@ static struct clk gpt10_ick = { .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP3430_EN_GPT10_SHIFT, .flags = CLOCK_IN_OMAP343X, + .clkdm_name = "core_l4_clkdm", .recalc = &followparent_recalc, }; @@ -1866,6 +1931,7 @@ static struct clk mcbsp5_ick = { .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP3430_EN_MCBSP5_SHIFT, .flags = CLOCK_IN_OMAP343X, + .clkdm_name = "core_l4_clkdm", .recalc = &followparent_recalc, }; @@ -1876,6 +1942,7 @@ static struct clk mcbsp1_ick = { .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP3430_EN_MCBSP1_SHIFT, .flags = CLOCK_IN_OMAP343X, + .clkdm_name = "core_l4_clkdm", .recalc = &followparent_recalc, }; @@ -1885,6 +1952,7 @@ static struct clk fac_ick = { .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP3430ES1_EN_FAC_SHIFT, .flags = CLOCK_IN_OMAP3430ES1, + .clkdm_name = "core_l4_clkdm", .recalc = &followparent_recalc, }; @@ -1894,6 +1962,7 @@ static struct clk mailboxes_ick = { .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP3430_EN_MAILBOXES_SHIFT, .flags = CLOCK_IN_OMAP343X, + .clkdm_name = "core_l4_clkdm", .recalc = &followparent_recalc, }; @@ -1913,6 +1982,7 @@ static struct clk ssi_l4_ick = { .parent = &l4_ick, .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | PARENT_CONTROLS_CLOCK, + .clkdm_name = "core_l4_clkdm", .recalc = &followparent_recalc, }; @@ -1922,6 +1992,7 @@ static struct clk ssi_ick = { .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP3430_EN_SSI_SHIFT, .flags = CLOCK_IN_OMAP343X, + .clkdm_name = "core_l4_clkdm", .recalc = &followparent_recalc, }; @@ -1996,7 +2067,7 @@ static struct clk des1_ick = { /* DSS */ static const struct clksel dss1_alwon_fck_clksel[] = { - { .parent = &sys_ck, .rates = dpll_bypass_rates }, + { .parent = &sys_ck, .rates = dpll_bypass_rates }, { .parent = &dpll4_m4x2_ck, .rates = dpll_locked_rates }, { .parent = NULL } }; @@ -2011,33 +2082,40 @@ static struct clk dss1_alwon_fck = { .clksel_mask = OMAP3430_ST_PERIPH_CLK_MASK, .clksel = dss1_alwon_fck_clksel, .flags = CLOCK_IN_OMAP343X, + .clkdm_name = "dss_clkdm", .recalc = &omap2_clksel_recalc, }; static struct clk dss_tv_fck = { .name = "dss_tv_fck", .parent = &omap_54m_fck, + .init = &omap2_init_clk_clkdm, .enable_reg = OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_FCLKEN), .enable_bit = OMAP3430_EN_TV_SHIFT, .flags = CLOCK_IN_OMAP343X, + .clkdm_name = "dss_clkdm", .recalc = &followparent_recalc, }; static struct clk dss_96m_fck = { .name = "dss_96m_fck", .parent = &omap_96m_fck, + .init = &omap2_init_clk_clkdm, .enable_reg = OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_FCLKEN), .enable_bit = OMAP3430_EN_TV_SHIFT, .flags = CLOCK_IN_OMAP343X, + .clkdm_name = "dss_clkdm", .recalc = &followparent_recalc, }; static struct clk dss2_alwon_fck = { .name = "dss2_alwon_fck", .parent = &sys_ck, + .init = &omap2_init_clk_clkdm, .enable_reg = OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_FCLKEN), .enable_bit = OMAP3430_EN_DSS2_SHIFT, .flags = CLOCK_IN_OMAP343X, + .clkdm_name = "dss_clkdm", .recalc = &followparent_recalc, }; @@ -2045,16 +2123,18 @@ static struct clk dss_ick = { /* Handles both L3 and L4 clocks */ .name = "dss_ick", .parent = &l4_ick, + .init = &omap2_init_clk_clkdm, .enable_reg = OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_ICLKEN), .enable_bit = OMAP3430_CM_ICLKEN_DSS_EN_DSS_SHIFT, .flags = CLOCK_IN_OMAP343X, + .clkdm_name = "dss_clkdm", .recalc = &followparent_recalc, }; /* CAM */ static const struct clksel cam_mclk_clksel[] = { - { .parent = &sys_ck, .rates = dpll_bypass_rates }, + { .parent = &sys_ck, .rates = dpll_bypass_rates }, { .parent = &dpll4_m5x2_ck, .rates = dpll_locked_rates }, { .parent = NULL } }; @@ -2069,24 +2149,29 @@ static struct clk cam_mclk = { .enable_reg = OMAP_CM_REGADDR(OMAP3430_CAM_MOD, CM_FCLKEN), .enable_bit = OMAP3430_EN_CAM_SHIFT, .flags = CLOCK_IN_OMAP343X, + .clkdm_name = "cam_clkdm", .recalc = &omap2_clksel_recalc, }; static struct clk cam_l3_ick = { .name = "cam_l3_ick", .parent = &l3_ick, + .init = &omap2_init_clk_clkdm, .enable_reg = OMAP_CM_REGADDR(OMAP3430_CAM_MOD, CM_ICLKEN), .enable_bit = OMAP3430_EN_CAM_SHIFT, .flags = CLOCK_IN_OMAP343X, + .clkdm_name = "cam_clkdm", .recalc = &followparent_recalc, }; static struct clk cam_l4_ick = { .name = "cam_l4_ick", .parent = &l4_ick, + .init = &omap2_init_clk_clkdm, .enable_reg = OMAP_CM_REGADDR(OMAP3430_CAM_MOD, CM_ICLKEN), .enable_bit = OMAP3430_EN_CAM_SHIFT, .flags = CLOCK_IN_OMAP343X, + .clkdm_name = "cam_clkdm", .recalc = &followparent_recalc, }; @@ -2095,45 +2180,55 @@ static struct clk cam_l4_ick = { static struct clk usbhost_120m_fck = { .name = "usbhost_120m_fck", .parent = &omap_120m_fck, + .init = &omap2_init_clk_clkdm, .enable_reg = OMAP_CM_REGADDR(OMAP3430ES2_USBHOST_MOD, CM_FCLKEN), .enable_bit = OMAP3430ES2_EN_USBHOST2_SHIFT, .flags = CLOCK_IN_OMAP3430ES2, + .clkdm_name = "usbhost_clkdm", .recalc = &followparent_recalc, }; static struct clk usbhost_48m_fck = { .name = "usbhost_48m_fck", .parent = &omap_48m_fck, + .init = &omap2_init_clk_clkdm, .enable_reg = OMAP_CM_REGADDR(OMAP3430ES2_USBHOST_MOD, CM_FCLKEN), .enable_bit = OMAP3430ES2_EN_USBHOST1_SHIFT, .flags = CLOCK_IN_OMAP3430ES2, + .clkdm_name = "usbhost_clkdm", .recalc = &followparent_recalc, }; static struct clk usbhost_l3_ick = { .name = "usbhost_l3_ick", .parent = &l3_ick, + .init = &omap2_init_clk_clkdm, .enable_reg = OMAP_CM_REGADDR(OMAP3430ES2_USBHOST_MOD, CM_ICLKEN), .enable_bit = OMAP3430ES2_EN_USBHOST_SHIFT, .flags = CLOCK_IN_OMAP3430ES2, + .clkdm_name = "usbhost_clkdm", .recalc = &followparent_recalc, }; static struct clk usbhost_l4_ick = { .name = "usbhost_l4_ick", .parent = &l4_ick, + .init = &omap2_init_clk_clkdm, .enable_reg = OMAP_CM_REGADDR(OMAP3430ES2_USBHOST_MOD, CM_ICLKEN), .enable_bit = OMAP3430ES2_EN_USBHOST_SHIFT, .flags = CLOCK_IN_OMAP3430ES2, + .clkdm_name = "usbhost_clkdm", .recalc = &followparent_recalc, }; static struct clk usbhost_sar_fck = { .name = "usbhost_sar_fck", .parent = &osc_sys_ck, + .init = &omap2_init_clk_clkdm, .enable_reg = OMAP_PRM_REGADDR(OMAP3430ES2_USBHOST_MOD, PM_PWSTCTRL), .enable_bit = OMAP3430ES2_SAVEANDRESTORE_SHIFT, .flags = CLOCK_IN_OMAP3430ES2, + .clkdm_name = "usbhost_clkdm", .recalc = &followparent_recalc, }; @@ -2175,6 +2270,7 @@ static struct clk usim_fck = { .recalc = &omap2_clksel_recalc, }; +/* XXX should gpt1's clksel have wkup_32k_fck as the 32k opt? */ static struct clk gpt1_fck = { .name = "gpt1_fck", .init = &omap2_init_clksel_parent, @@ -2184,13 +2280,16 @@ static struct clk gpt1_fck = { .clksel_mask = OMAP3430_CLKSEL_GPT1_MASK, .clksel = omap343x_gpt_clksel, .flags = CLOCK_IN_OMAP343X, + .clkdm_name = "wkup_clkdm", .recalc = &omap2_clksel_recalc, }; static struct clk wkup_32k_fck = { .name = "wkup_32k_fck", + .init = &omap2_init_clk_clkdm, .parent = &omap_32k_fck, .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | ALWAYS_ENABLED, + .clkdm_name = "wkup_clkdm", .recalc = &followparent_recalc, }; @@ -2200,6 +2299,7 @@ static struct clk gpio1_fck = { .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN), .enable_bit = OMAP3430_EN_GPIO1_SHIFT, .flags = CLOCK_IN_OMAP343X, + .clkdm_name = "wkup_clkdm", .recalc = &followparent_recalc, }; @@ -2209,6 +2309,7 @@ static struct clk wdt2_fck = { .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN), .enable_bit = OMAP3430_EN_WDT2_SHIFT, .flags = CLOCK_IN_OMAP343X, + .clkdm_name = "wkup_clkdm", .recalc = &followparent_recalc, }; @@ -2216,6 +2317,7 @@ static struct clk wkup_l4_ick = { .name = "wkup_l4_ick", .parent = &sys_ck, .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | ALWAYS_ENABLED, + .clkdm_name = "wkup_clkdm", .recalc = &followparent_recalc, }; @@ -2227,6 +2329,7 @@ static struct clk usim_ick = { .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN), .enable_bit = OMAP3430ES2_EN_USIMOCP_SHIFT, .flags = CLOCK_IN_OMAP3430ES2, + .clkdm_name = "wkup_clkdm", .recalc = &followparent_recalc, }; @@ -2236,6 +2339,7 @@ static struct clk wdt2_ick = { .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN), .enable_bit = OMAP3430_EN_WDT2_SHIFT, .flags = CLOCK_IN_OMAP343X, + .clkdm_name = "wkup_clkdm", .recalc = &followparent_recalc, }; @@ -2245,6 +2349,7 @@ static struct clk wdt1_ick = { .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN), .enable_bit = OMAP3430_EN_WDT1_SHIFT, .flags = CLOCK_IN_OMAP343X, + .clkdm_name = "wkup_clkdm", .recalc = &followparent_recalc, }; @@ -2254,6 +2359,7 @@ static struct clk gpio1_ick = { .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN), .enable_bit = OMAP3430_EN_GPIO1_SHIFT, .flags = CLOCK_IN_OMAP343X, + .clkdm_name = "wkup_clkdm", .recalc = &followparent_recalc, }; @@ -2263,15 +2369,18 @@ static struct clk omap_32ksync_ick = { .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN), .enable_bit = OMAP3430_EN_32KSYNC_SHIFT, .flags = CLOCK_IN_OMAP343X, + .clkdm_name = "wkup_clkdm", .recalc = &followparent_recalc, }; +/* XXX This clock no longer exists in 3430 TRM rev F */ static struct clk gpt12_ick = { .name = "gpt12_ick", .parent = &wkup_l4_ick, .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN), .enable_bit = OMAP3430_EN_GPT12_SHIFT, .flags = CLOCK_IN_OMAP343X, + .clkdm_name = "wkup_clkdm", .recalc = &followparent_recalc, }; @@ -2281,6 +2390,7 @@ static struct clk gpt1_ick = { .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN), .enable_bit = OMAP3430_EN_GPT1_SHIFT, .flags = CLOCK_IN_OMAP343X, + .clkdm_name = "wkup_clkdm", .recalc = &followparent_recalc, }; @@ -2291,16 +2401,20 @@ static struct clk gpt1_ick = { static struct clk per_96m_fck = { .name = "per_96m_fck", .parent = &omap_96m_alwon_fck, + .init = &omap2_init_clk_clkdm, .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | PARENT_CONTROLS_CLOCK, + .clkdm_name = "per_clkdm", .recalc = &followparent_recalc, }; static struct clk per_48m_fck = { .name = "per_48m_fck", .parent = &omap_48m_fck, + .init = &omap2_init_clk_clkdm, .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | PARENT_CONTROLS_CLOCK, + .clkdm_name = "per_clkdm", .recalc = &followparent_recalc, }; @@ -2310,6 +2424,7 @@ static struct clk uart3_fck = { .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN), .enable_bit = OMAP3430_EN_UART3_SHIFT, .flags = CLOCK_IN_OMAP343X, + .clkdm_name = "per_clkdm", .recalc = &followparent_recalc, }; @@ -2322,6 +2437,7 @@ static struct clk gpt2_fck = { .clksel_mask = OMAP3430_CLKSEL_GPT2_MASK, .clksel = omap343x_gpt_clksel, .flags = CLOCK_IN_OMAP343X, + .clkdm_name = "per_clkdm", .recalc = &omap2_clksel_recalc, }; @@ -2334,6 +2450,7 @@ static struct clk gpt3_fck = { .clksel_mask = OMAP3430_CLKSEL_GPT3_MASK, .clksel = omap343x_gpt_clksel, .flags = CLOCK_IN_OMAP343X, + .clkdm_name = "per_clkdm", .recalc = &omap2_clksel_recalc, }; @@ -2346,6 +2463,7 @@ static struct clk gpt4_fck = { .clksel_mask = OMAP3430_CLKSEL_GPT4_MASK, .clksel = omap343x_gpt_clksel, .flags = CLOCK_IN_OMAP343X, + .clkdm_name = "per_clkdm", .recalc = &omap2_clksel_recalc, }; @@ -2358,6 +2476,7 @@ static struct clk gpt5_fck = { .clksel_mask = OMAP3430_CLKSEL_GPT5_MASK, .clksel = omap343x_gpt_clksel, .flags = CLOCK_IN_OMAP343X, + .clkdm_name = "per_clkdm", .recalc = &omap2_clksel_recalc, }; @@ -2370,6 +2489,7 @@ static struct clk gpt6_fck = { .clksel_mask = OMAP3430_CLKSEL_GPT6_MASK, .clksel = omap343x_gpt_clksel, .flags = CLOCK_IN_OMAP343X, + .clkdm_name = "per_clkdm", .recalc = &omap2_clksel_recalc, }; @@ -2382,6 +2502,7 @@ static struct clk gpt7_fck = { .clksel_mask = OMAP3430_CLKSEL_GPT7_MASK, .clksel = omap343x_gpt_clksel, .flags = CLOCK_IN_OMAP343X, + .clkdm_name = "per_clkdm", .recalc = &omap2_clksel_recalc, }; @@ -2394,6 +2515,7 @@ static struct clk gpt8_fck = { .clksel_mask = OMAP3430_CLKSEL_GPT8_MASK, .clksel = omap343x_gpt_clksel, .flags = CLOCK_IN_OMAP343X, + .clkdm_name = "per_clkdm", .recalc = &omap2_clksel_recalc, }; @@ -2406,12 +2528,14 @@ static struct clk gpt9_fck = { .clksel_mask = OMAP3430_CLKSEL_GPT9_MASK, .clksel = omap343x_gpt_clksel, .flags = CLOCK_IN_OMAP343X, + .clkdm_name = "per_clkdm", .recalc = &omap2_clksel_recalc, }; static struct clk per_32k_alwon_fck = { .name = "per_32k_alwon_fck", .parent = &omap_32k_fck, + .clkdm_name = "per_clkdm", .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | ALWAYS_ENABLED, .recalc = &followparent_recalc, }; @@ -2422,6 +2546,7 @@ static struct clk gpio6_fck = { .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN), .enable_bit = OMAP3430_EN_GPIO6_SHIFT, .flags = CLOCK_IN_OMAP343X, + .clkdm_name = "per_clkdm", .recalc = &followparent_recalc, }; @@ -2431,6 +2556,7 @@ static struct clk gpio5_fck = { .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN), .enable_bit = OMAP3430_EN_GPIO5_SHIFT, .flags = CLOCK_IN_OMAP343X, + .clkdm_name = "per_clkdm", .recalc = &followparent_recalc, }; @@ -2440,6 +2566,7 @@ static struct clk gpio4_fck = { .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN), .enable_bit = OMAP3430_EN_GPIO4_SHIFT, .flags = CLOCK_IN_OMAP343X, + .clkdm_name = "per_clkdm", .recalc = &followparent_recalc, }; @@ -2449,6 +2576,7 @@ static struct clk gpio3_fck = { .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN), .enable_bit = OMAP3430_EN_GPIO3_SHIFT, .flags = CLOCK_IN_OMAP343X, + .clkdm_name = "per_clkdm", .recalc = &followparent_recalc, }; @@ -2458,6 +2586,7 @@ static struct clk gpio2_fck = { .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN), .enable_bit = OMAP3430_EN_GPIO2_SHIFT, .flags = CLOCK_IN_OMAP343X, + .clkdm_name = "per_clkdm", .recalc = &followparent_recalc, }; @@ -2467,6 +2596,7 @@ static struct clk wdt3_fck = { .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN), .enable_bit = OMAP3430_EN_WDT3_SHIFT, .flags = CLOCK_IN_OMAP343X, + .clkdm_name = "per_clkdm", .recalc = &followparent_recalc, }; @@ -2475,6 +2605,7 @@ static struct clk per_l4_ick = { .parent = &l4_ick, .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | PARENT_CONTROLS_CLOCK, + .clkdm_name = "per_clkdm", .recalc = &followparent_recalc, }; @@ -2484,6 +2615,7 @@ static struct clk gpio6_ick = { .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), .enable_bit = OMAP3430_EN_GPIO6_SHIFT, .flags = CLOCK_IN_OMAP343X, + .clkdm_name = "per_clkdm", .recalc = &followparent_recalc, }; @@ -2493,6 +2625,7 @@ static struct clk gpio5_ick = { .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), .enable_bit = OMAP3430_EN_GPIO5_SHIFT, .flags = CLOCK_IN_OMAP343X, + .clkdm_name = "per_clkdm", .recalc = &followparent_recalc, }; @@ -2502,6 +2635,7 @@ static struct clk gpio4_ick = { .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), .enable_bit = OMAP3430_EN_GPIO4_SHIFT, .flags = CLOCK_IN_OMAP343X, + .clkdm_name = "per_clkdm", .recalc = &followparent_recalc, }; @@ -2511,6 +2645,7 @@ static struct clk gpio3_ick = { .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), .enable_bit = OMAP3430_EN_GPIO3_SHIFT, .flags = CLOCK_IN_OMAP343X, + .clkdm_name = "per_clkdm", .recalc = &followparent_recalc, }; @@ -2520,6 +2655,7 @@ static struct clk gpio2_ick = { .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), .enable_bit = OMAP3430_EN_GPIO2_SHIFT, .flags = CLOCK_IN_OMAP343X, + .clkdm_name = "per_clkdm", .recalc = &followparent_recalc, }; @@ -2529,6 +2665,7 @@ static struct clk wdt3_ick = { .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), .enable_bit = OMAP3430_EN_WDT3_SHIFT, .flags = CLOCK_IN_OMAP343X, + .clkdm_name = "per_clkdm", .recalc = &followparent_recalc, }; @@ -2538,6 +2675,7 @@ static struct clk uart3_ick = { .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), .enable_bit = OMAP3430_EN_UART3_SHIFT, .flags = CLOCK_IN_OMAP343X, + .clkdm_name = "per_clkdm", .recalc = &followparent_recalc, }; @@ -2547,6 +2685,7 @@ static struct clk gpt9_ick = { .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), .enable_bit = OMAP3430_EN_GPT9_SHIFT, .flags = CLOCK_IN_OMAP343X, + .clkdm_name = "per_clkdm", .recalc = &followparent_recalc, }; @@ -2556,6 +2695,7 @@ static struct clk gpt8_ick = { .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), .enable_bit = OMAP3430_EN_GPT8_SHIFT, .flags = CLOCK_IN_OMAP343X, + .clkdm_name = "per_clkdm", .recalc = &followparent_recalc, }; @@ -2565,6 +2705,7 @@ static struct clk gpt7_ick = { .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), .enable_bit = OMAP3430_EN_GPT7_SHIFT, .flags = CLOCK_IN_OMAP343X, + .clkdm_name = "per_clkdm", .recalc = &followparent_recalc, }; @@ -2574,6 +2715,7 @@ static struct clk gpt6_ick = { .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), .enable_bit = OMAP3430_EN_GPT6_SHIFT, .flags = CLOCK_IN_OMAP343X, + .clkdm_name = "per_clkdm", .recalc = &followparent_recalc, }; @@ -2583,6 +2725,7 @@ static struct clk gpt5_ick = { .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), .enable_bit = OMAP3430_EN_GPT5_SHIFT, .flags = CLOCK_IN_OMAP343X, + .clkdm_name = "per_clkdm", .recalc = &followparent_recalc, }; @@ -2592,6 +2735,7 @@ static struct clk gpt4_ick = { .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), .enable_bit = OMAP3430_EN_GPT4_SHIFT, .flags = CLOCK_IN_OMAP343X, + .clkdm_name = "per_clkdm", .recalc = &followparent_recalc, }; @@ -2601,6 +2745,7 @@ static struct clk gpt3_ick = { .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), .enable_bit = OMAP3430_EN_GPT3_SHIFT, .flags = CLOCK_IN_OMAP343X, + .clkdm_name = "per_clkdm", .recalc = &followparent_recalc, }; @@ -2610,6 +2755,7 @@ static struct clk gpt2_ick = { .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), .enable_bit = OMAP3430_EN_GPT2_SHIFT, .flags = CLOCK_IN_OMAP343X, + .clkdm_name = "per_clkdm", .recalc = &followparent_recalc, }; @@ -2620,6 +2766,7 @@ static struct clk mcbsp2_ick = { .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), .enable_bit = OMAP3430_EN_MCBSP2_SHIFT, .flags = CLOCK_IN_OMAP343X, + .clkdm_name = "per_clkdm", .recalc = &followparent_recalc, }; @@ -2630,6 +2777,7 @@ static struct clk mcbsp3_ick = { .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), .enable_bit = OMAP3430_EN_MCBSP3_SHIFT, .flags = CLOCK_IN_OMAP343X, + .clkdm_name = "per_clkdm", .recalc = &followparent_recalc, }; @@ -2640,12 +2788,13 @@ static struct clk mcbsp4_ick = { .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), .enable_bit = OMAP3430_EN_MCBSP4_SHIFT, .flags = CLOCK_IN_OMAP343X, + .clkdm_name = "per_clkdm", .recalc = &followparent_recalc, }; static const struct clksel mcbsp_234_clksel[] = { { .parent = &per_96m_fck, .rates = common_mcbsp_96m_rates }, - { .parent = &mcbsp_clks, .rates = common_mcbsp_mcbsp_rates }, + { .parent = &mcbsp_clks, .rates = common_mcbsp_mcbsp_rates }, { .parent = NULL } }; @@ -2659,6 +2808,7 @@ static struct clk mcbsp2_fck = { .clksel_mask = OMAP2_MCBSP2_CLKS_MASK, .clksel = mcbsp_234_clksel, .flags = CLOCK_IN_OMAP343X, + .clkdm_name = "per_clkdm", .recalc = &omap2_clksel_recalc, }; @@ -2672,6 +2822,7 @@ static struct clk mcbsp3_fck = { .clksel_mask = OMAP2_MCBSP3_CLKS_MASK, .clksel = mcbsp_234_clksel, .flags = CLOCK_IN_OMAP343X, + .clkdm_name = "per_clkdm", .recalc = &omap2_clksel_recalc, }; @@ -2685,6 +2836,7 @@ static struct clk mcbsp4_fck = { .clksel_mask = OMAP2_MCBSP4_CLKS_MASK, .clksel = mcbsp_234_clksel, .flags = CLOCK_IN_OMAP343X, + .clkdm_name = "per_clkdm", .recalc = &omap2_clksel_recalc, }; @@ -2732,6 +2884,7 @@ static struct clk emu_src_ck = { .clksel_mask = OMAP3430_MUX_CTRL_MASK, .clksel = emu_src_clksel, .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | ALWAYS_ENABLED, + .clkdm_name = "emu_clkdm", .recalc = &omap2_clksel_recalc, }; @@ -2755,6 +2908,7 @@ static struct clk pclk_fck = { .clksel_mask = OMAP3430_CLKSEL_PCLK_MASK, .clksel = pclk_emu_clksel, .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | ALWAYS_ENABLED, + .clkdm_name = "emu_clkdm", .recalc = &omap2_clksel_recalc, }; @@ -2777,6 +2931,7 @@ static struct clk pclkx2_fck = { .clksel_mask = OMAP3430_CLKSEL_PCLKX2_MASK, .clksel = pclkx2_emu_clksel, .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | ALWAYS_ENABLED, + .clkdm_name = "emu_clkdm", .recalc = &omap2_clksel_recalc, }; @@ -2792,6 +2947,7 @@ static struct clk atclk_fck = { .clksel_mask = OMAP3430_CLKSEL_ATCLK_MASK, .clksel = atclk_emu_clksel, .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | ALWAYS_ENABLED, + .clkdm_name = "emu_clkdm", .recalc = &omap2_clksel_recalc, }; @@ -2802,6 +2958,7 @@ static struct clk traceclk_src_fck = { .clksel_mask = OMAP3430_TRACE_MUX_CTRL_MASK, .clksel = emu_src_clksel, .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | ALWAYS_ENABLED, + .clkdm_name = "emu_clkdm", .recalc = &omap2_clksel_recalc, }; @@ -2824,6 +2981,7 @@ static struct clk traceclk_fck = { .clksel_mask = OMAP3430_CLKSEL_TRACECLK_MASK, .clksel = traceclk_clksel, .flags = CLOCK_IN_OMAP343X | ALWAYS_ENABLED, + .clkdm_name = "emu_clkdm", .recalc = &omap2_clksel_recalc, }; @@ -2853,11 +3011,13 @@ static struct clk sr_l4_ick = { .name = "sr_l4_ick", .parent = &l4_ick, .flags = CLOCK_IN_OMAP343X, + .clkdm_name = "core_l4_clkdm", .recalc = &followparent_recalc, }; /* SECURE_32K_FCK clocks */ +/* XXX This clock no longer exists in 3430 TRM rev F */ static struct clk gpt12_fck = { .name = "gpt12_fck", .parent = &secure_32k_fck, diff --git a/arch/arm/mach-omap2/clockdomains.h b/arch/arm/mach-omap2/clockdomains.h index a2763203713..cd86dcc7b42 100644 --- a/arch/arm/mach-omap2/clockdomains.h +++ b/arch/arm/mach-omap2/clockdomains.h @@ -168,12 +168,19 @@ static struct clockdomain sgx_clkdm = { .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430ES2), }; +/* + * The die-to-die clockdomain was documented in the 34xx ES1 TRM, but + * then that information was removed from the 34xx ES2+ TRM. It is + * unclear whether the core is still there, but the clockdomain logic + * is there, and must be programmed to an appropriate state if the + * CORE clockdomain is to become inactive. + */ static struct clockdomain d2d_clkdm = { .name = "d2d_clkdm", .pwrdm_name = "core_pwrdm", .flags = CLKDM_CAN_HWSUP, .clktrctrl_mask = OMAP3430ES1_CLKTRCTRL_D2D_MASK, - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430ES1), + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430), }; static struct clockdomain core_l3_34xx_clkdm = { -- cgit v1.2.3-70-g09d2 From 5955902fb5c31f6a784ddb7aa16079a2bec588f5 Mon Sep 17 00:00:00 2001 From: Högander Jouni Date: Tue, 19 Aug 2008 11:08:45 +0300 Subject: ARM: OMAP2: Clock: Combine 34xx l3_icks and l4_icks E.g dss_l3_ick and dss_l4_ick have same gating control. Having own clock for both of them causes race condition between enable / disable. This patch combines this kind of clocks and names new clock as _ick. Signed-off-by: Jouni Hogander Acked-by: Paul Walmsley Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/clock34xx.h | 62 ++++++++++++++++------------------------- 1 file changed, 24 insertions(+), 38 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/clock34xx.h b/arch/arm/mach-omap2/clock34xx.h index bb01e201481..c38a8a09692 100644 --- a/arch/arm/mach-omap2/clock34xx.h +++ b/arch/arm/mach-omap2/clock34xx.h @@ -1189,27 +1189,34 @@ static const struct clksel gfx_l3_clksel[] = { { .parent = NULL } }; -static struct clk gfx_l3_fck = { - .name = "gfx_l3_fck", +/* Virtual parent clock for gfx_l3_ick and gfx_l3_fck */ +static struct clk gfx_l3_ck = { + .name = "gfx_l3_ck", .parent = &l3_ick, .init = &omap2_init_clksel_parent, .enable_reg = OMAP_CM_REGADDR(GFX_MOD, CM_ICLKEN), .enable_bit = OMAP_EN_GFX_SHIFT, + .flags = CLOCK_IN_OMAP3430ES1, + .recalc = &followparent_recalc, +}; + +static struct clk gfx_l3_fck = { + .name = "gfx_l3_fck", + .parent = &gfx_l3_ck, + .init = &omap2_init_clksel_parent, .clksel_reg = OMAP_CM_REGADDR(GFX_MOD, CM_CLKSEL), .clksel_mask = OMAP_CLKSEL_GFX_MASK, .clksel = gfx_l3_clksel, - .flags = CLOCK_IN_OMAP3430ES1 | RATE_PROPAGATES, + .flags = CLOCK_IN_OMAP3430ES1 | RATE_PROPAGATES | + PARENT_CONTROLS_CLOCK, .clkdm_name = "gfx_3430es1_clkdm", .recalc = &omap2_clksel_recalc, }; static struct clk gfx_l3_ick = { .name = "gfx_l3_ick", - .parent = &l3_ick, - .init = &omap2_init_clk_clkdm, - .enable_reg = OMAP_CM_REGADDR(GFX_MOD, CM_ICLKEN), - .enable_bit = OMAP_EN_GFX_SHIFT, - .flags = CLOCK_IN_OMAP3430ES1, + .parent = &gfx_l3_ck, + .flags = CLOCK_IN_OMAP3430ES1 | PARENT_CONTROLS_CLOCK, .clkdm_name = "gfx_3430es1_clkdm", .recalc = &followparent_recalc, }; @@ -2153,19 +2160,9 @@ static struct clk cam_mclk = { .recalc = &omap2_clksel_recalc, }; -static struct clk cam_l3_ick = { - .name = "cam_l3_ick", - .parent = &l3_ick, - .init = &omap2_init_clk_clkdm, - .enable_reg = OMAP_CM_REGADDR(OMAP3430_CAM_MOD, CM_ICLKEN), - .enable_bit = OMAP3430_EN_CAM_SHIFT, - .flags = CLOCK_IN_OMAP343X, - .clkdm_name = "cam_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk cam_l4_ick = { - .name = "cam_l4_ick", +static struct clk cam_ick = { + /* Handles both L3 and L4 clocks */ + .name = "cam_ick", .parent = &l4_ick, .init = &omap2_init_clk_clkdm, .enable_reg = OMAP_CM_REGADDR(OMAP3430_CAM_MOD, CM_ICLKEN), @@ -2199,19 +2196,9 @@ static struct clk usbhost_48m_fck = { .recalc = &followparent_recalc, }; -static struct clk usbhost_l3_ick = { - .name = "usbhost_l3_ick", - .parent = &l3_ick, - .init = &omap2_init_clk_clkdm, - .enable_reg = OMAP_CM_REGADDR(OMAP3430ES2_USBHOST_MOD, CM_ICLKEN), - .enable_bit = OMAP3430ES2_EN_USBHOST_SHIFT, - .flags = CLOCK_IN_OMAP3430ES2, - .clkdm_name = "usbhost_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk usbhost_l4_ick = { - .name = "usbhost_l4_ick", +static struct clk usbhost_ick = { + /* Handles both L3 and L4 clocks */ + .name = "usbhost_ick", .parent = &l4_ick, .init = &omap2_init_clk_clkdm, .enable_reg = OMAP_CM_REGADDR(OMAP3430ES2_USBHOST_MOD, CM_ICLKEN), @@ -3093,6 +3080,7 @@ static struct clk *onchip_34xx_clks[] __initdata = { &l3_ick, &l4_ick, &rm_ick, + &gfx_l3_ck, &gfx_l3_fck, &gfx_l3_ick, &gfx_cg1_ck, @@ -3174,12 +3162,10 @@ static struct clk *onchip_34xx_clks[] __initdata = { &dss2_alwon_fck, &dss_ick, &cam_mclk, - &cam_l3_ick, - &cam_l4_ick, + &cam_ick, &usbhost_120m_fck, &usbhost_48m_fck, - &usbhost_l3_ick, - &usbhost_l4_ick, + &usbhost_ick, &usbhost_sar_fck, &usim_fck, &gpt1_fck, -- cgit v1.2.3-70-g09d2 From 0b7cbfb5e1f03f58241bf236cca303ee45e14b4f Mon Sep 17 00:00:00 2001 From: Paul Walmsley Date: Wed, 25 Jun 2008 18:09:37 -0600 Subject: [ARM] OMAP3 pwrdm: add hardware save-and-restore (SAR) support MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit OMAP3430ES2+ introduces a new feature: optional powerdomain context hardware save-and-restore (SAR). Currently, this feature only applies to USBHOST and USBTLL module context when the USBHOST or CORE powerdomains enter a low-power sleep state[1]. This feature avoids re-enumeration of USB devices when the powerdomains return from idle, which is potentially time-consuming. This patch adds support for enabling and disabling hardware save-and-restore to the powerdomain code. Three new functions are added, pwrdm_enable_hdwr_sar(), pwrdm_disable_hdwr_sar(), and pwrdm_can_hdwr_sar(). A new struct powerdomain "flags" field is added, with a PWRDM_HAS_HDWR_SAR flag to indicate powerdomains with SAR support. Thanks to Jouni Högander for reviewing an earlier version of these patches, and Richard Woodruff for clarifying the purpose of these bits. 1. For the USBHOST controller module, context loss occurs when the USBHOST powerdomain enters off-idle. For USBTLL, context loss occurs either if CORE enters off-idle, or if the CORE logic is configured to turn off when CORE enters retention-idle (OSWR). 34xx ES2 TRM 4.8.6.1.1, 4.8.6.1.2 Signed-off-by: Paul Walmsley Signed-off-by: Tony Lindgren Signed-off-by: Russell King --- arch/arm/mach-omap2/powerdomain.c | 68 +++++++++++++++++++++++++++ arch/arm/plat-omap/include/mach/powerdomain.h | 11 +++++ 2 files changed, 79 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-omap2/powerdomain.c b/arch/arm/mach-omap2/powerdomain.c index 9a803492b28..73e2971b175 100644 --- a/arch/arm/mach-omap2/powerdomain.c +++ b/arch/arm/mach-omap2/powerdomain.c @@ -1002,6 +1002,74 @@ int pwrdm_clear_all_prev_pwrst(struct powerdomain *pwrdm) return 0; } +/** + * pwrdm_enable_hdwr_sar - enable automatic hardware SAR for a pwrdm + * @pwrdm: struct powerdomain * + * + * Enable automatic context save-and-restore upon power state change + * for some devices in a powerdomain. Warning: this only affects a + * subset of devices in a powerdomain; check the TRM closely. Returns + * -EINVAL if the powerdomain pointer is null or if the powerdomain + * does not support automatic save-and-restore, or returns 0 upon + * success. + */ +int pwrdm_enable_hdwr_sar(struct powerdomain *pwrdm) +{ + if (!pwrdm) + return -EINVAL; + + if (!(pwrdm->flags & PWRDM_HAS_HDWR_SAR)) + return -EINVAL; + + pr_debug("powerdomain: %s: setting SAVEANDRESTORE bit\n", + pwrdm->name); + + prm_rmw_mod_reg_bits(0, 1 << OMAP3430ES2_SAVEANDRESTORE_SHIFT, + pwrdm->prcm_offs, PM_PWSTCTRL); + + return 0; +} + +/** + * pwrdm_disable_hdwr_sar - disable automatic hardware SAR for a pwrdm + * @pwrdm: struct powerdomain * + * + * Disable automatic context save-and-restore upon power state change + * for some devices in a powerdomain. Warning: this only affects a + * subset of devices in a powerdomain; check the TRM closely. Returns + * -EINVAL if the powerdomain pointer is null or if the powerdomain + * does not support automatic save-and-restore, or returns 0 upon + * success. + */ +int pwrdm_disable_hdwr_sar(struct powerdomain *pwrdm) +{ + if (!pwrdm) + return -EINVAL; + + if (!(pwrdm->flags & PWRDM_HAS_HDWR_SAR)) + return -EINVAL; + + pr_debug("powerdomain: %s: clearing SAVEANDRESTORE bit\n", + pwrdm->name); + + prm_rmw_mod_reg_bits(1 << OMAP3430ES2_SAVEANDRESTORE_SHIFT, 0, + pwrdm->prcm_offs, PM_PWSTCTRL); + + return 0; +} + +/** + * pwrdm_has_hdwr_sar - test whether powerdomain supports hardware SAR + * @pwrdm: struct powerdomain * + * + * Returns 1 if powerdomain 'pwrdm' supports hardware save-and-restore + * for some devices, or 0 if it does not. + */ +bool pwrdm_has_hdwr_sar(struct powerdomain *pwrdm) +{ + return (pwrdm && pwrdm->flags & PWRDM_HAS_HDWR_SAR) ? 1 : 0; +} + /** * pwrdm_wait_transition - wait for powerdomain power transition to finish * @pwrdm: struct powerdomain * to wait for diff --git a/arch/arm/plat-omap/include/mach/powerdomain.h b/arch/arm/plat-omap/include/mach/powerdomain.h index 5fa666fa9be..2806a9c8e4d 100644 --- a/arch/arm/plat-omap/include/mach/powerdomain.h +++ b/arch/arm/plat-omap/include/mach/powerdomain.h @@ -38,6 +38,10 @@ #define PWRSTS_OFF_RET_ON (PWRSTS_OFF_RET | (1 << PWRDM_POWER_ON)) +/* Powerdomain flags */ +#define PWRDM_HAS_HDWR_SAR (1 << 0) /* hardware save-and-restore support */ + + /* * Number of memory banks that are power-controllable. On OMAP3430, the * maximum is 4. @@ -96,6 +100,9 @@ struct powerdomain { /* Possible logic power states when pwrdm in RETENTION */ const u8 pwrsts_logic_ret; + /* Powerdomain flags */ + const u8 flags; + /* Number of software-controllable memory banks in this powerdomain */ const u8 banks; @@ -150,6 +157,10 @@ int pwrdm_read_prev_logic_pwrst(struct powerdomain *pwrdm); int pwrdm_read_mem_pwrst(struct powerdomain *pwrdm, u8 bank); int pwrdm_read_prev_mem_pwrst(struct powerdomain *pwrdm, u8 bank); +int pwrdm_enable_hdwr_sar(struct powerdomain *pwrdm); +int pwrdm_disable_hdwr_sar(struct powerdomain *pwrdm); +bool pwrdm_has_hdwr_sar(struct powerdomain *pwrdm); + int pwrdm_wait_transition(struct powerdomain *pwrdm); #endif -- cgit v1.2.3-70-g09d2 From e89087c99f2be002ff46126742c21da5d357b324 Mon Sep 17 00:00:00 2001 From: Paul Walmsley Date: Tue, 20 May 2008 18:41:35 -0600 Subject: [ARM] OMAP: clockdomain: add clkdm_get_pwrdm() Add clkdm_get_pwrdm() to the clockdomain code. It will return a pointer to the powerdomain struct that the clockdomain is contained within. Used by the PM code. Signed-off-by: Paul Walmsley Signed-off-by: Tony Lindgren Signed-off-by: Russell King --- arch/arm/mach-omap2/clockdomain.c | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-omap2/clockdomain.c b/arch/arm/mach-omap2/clockdomain.c index b6ff5aa4726..4c3ce9cfd94 100644 --- a/arch/arm/mach-omap2/clockdomain.c +++ b/arch/arm/mach-omap2/clockdomain.c @@ -315,6 +315,22 @@ int clkdm_for_each(int (*fn)(struct clockdomain *clkdm)) } +/** + * clkdm_get_pwrdm - return a ptr to the pwrdm that this clkdm resides in + * @clkdm: struct clockdomain * + * + * Return a pointer to the struct powerdomain that the specified clockdomain + * 'clkdm' exists in, or returns NULL if clkdm argument is NULL. + */ +struct powerdomain *clkdm_get_pwrdm(struct clockdomain *clkdm) +{ + if (!clkdm) + return NULL; + + return clkdm->pwrdm; +} + + /* Hardware clockdomain control */ /** -- cgit v1.2.3-70-g09d2 From 5668545a08c80e0d9dc325bd6c79028b19227e5d Mon Sep 17 00:00:00 2001 From: Russell King Date: Mon, 1 Sep 2008 21:25:33 +0100 Subject: [ARM] omap: improve is_omap_port() Make is_omap_port() take the uart_8250_port structure so it can do whatever test it desires. Convert the test to compare the physical addresses rather than virtual addresses. Signed-off-by: Russell King --- arch/arm/plat-omap/include/mach/serial.h | 12 ++++++------ drivers/serial/8250.c | 2 +- 2 files changed, 7 insertions(+), 7 deletions(-) (limited to 'arch') diff --git a/arch/arm/plat-omap/include/mach/serial.h b/arch/arm/plat-omap/include/mach/serial.h index cc6bfa51ccb..515b89bee96 100644 --- a/arch/arm/plat-omap/include/mach/serial.h +++ b/arch/arm/plat-omap/include/mach/serial.h @@ -26,12 +26,12 @@ #define OMAP1510_BASE_BAUD (12000000/16) #define OMAP16XX_BASE_BAUD (48000000/16) -#define is_omap_port(p) ({int __ret = 0; \ - if (p == IO_ADDRESS(OMAP_UART1_BASE) || \ - p == IO_ADDRESS(OMAP_UART2_BASE) || \ - p == IO_ADDRESS(OMAP_UART3_BASE)) \ - __ret = 1; \ - __ret; \ +#define is_omap_port(pt) ({int __ret = 0; \ + if ((pt)->port.mapbase == OMAP_UART1_BASE || \ + (pt)->port.mapbase == OMAP_UART2_BASE || \ + (pt)->port.mapbase == OMAP_UART3_BASE) \ + __ret = 1; \ + __ret; \ }) #endif diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c index 9ccc563d873..47a60960bb1 100644 --- a/drivers/serial/8250.c +++ b/drivers/serial/8250.c @@ -2213,7 +2213,7 @@ serial8250_set_termios(struct uart_port *port, struct ktermios *termios, #ifdef CONFIG_ARCH_OMAP15XX /* Workaround to enable 115200 baud on OMAP1510 internal ports */ - if (cpu_is_omap1510() && is_omap_port((unsigned int)up->port.membase)) { + if (cpu_is_omap1510() && is_omap_port(up)) { if (baud == 115200) { quot = 1; serial_out(up, UART_OMAP_OSC_12M_SEL, 1); -- cgit v1.2.3-70-g09d2 From 690b5a13b27ba3bb2c9d61c1f4018c5074b591e6 Mon Sep 17 00:00:00 2001 From: Russell King Date: Thu, 4 Sep 2008 12:07:44 +0100 Subject: [ARM] omap: allow ioremap() to use our fixed IO mappings Signed-off-by: Russell King --- arch/arm/plat-omap/Makefile | 2 +- arch/arm/plat-omap/include/mach/io.h | 6 +++ arch/arm/plat-omap/io.c | 83 ++++++++++++++++++++++++++++++++++++ 3 files changed, 90 insertions(+), 1 deletion(-) create mode 100644 arch/arm/plat-omap/io.c (limited to 'arch') diff --git a/arch/arm/plat-omap/Makefile b/arch/arm/plat-omap/Makefile index 2c4051cc79a..deaff58878a 100644 --- a/arch/arm/plat-omap/Makefile +++ b/arch/arm/plat-omap/Makefile @@ -4,7 +4,7 @@ # Common support obj-y := common.o sram.o clock.o devices.o dma.o mux.o gpio.o \ - usb.o fb.o + usb.o fb.o io.o obj-m := obj-n := obj- := diff --git a/arch/arm/plat-omap/include/mach/io.h b/arch/arm/plat-omap/include/mach/io.h index 2a30b7d88cd..b9f57ce0ac1 100644 --- a/arch/arm/plat-omap/include/mach/io.h +++ b/arch/arm/plat-omap/include/mach/io.h @@ -192,6 +192,12 @@ extern void omap1_init_common_hw(void); extern void omap2_map_common_io(void); extern void omap2_init_common_hw(void); +#define __arch_ioremap(p,s,t) omap_ioremap(p,s,t) +#define __arch_iounmap(v) omap_iounmap(v) + +void __iomem *omap_ioremap(unsigned long phys, size_t size, unsigned int type); +void omap_iounmap(volatile void __iomem *addr); + #endif #endif diff --git a/arch/arm/plat-omap/io.c b/arch/arm/plat-omap/io.c new file mode 100644 index 00000000000..0253c456ed5 --- /dev/null +++ b/arch/arm/plat-omap/io.c @@ -0,0 +1,83 @@ +#include +#include +#include + +#include +#include +#include +#include +#include + +#define BETWEEN(p,st,sz) ((p) >= (st) && (p) < ((st) + (sz))) +#define XLATE(p,pst,vst) ((void __iomem *)((p) - (pst) + (vst))) + +/* + * Intercept ioremap() requests for addresses in our fixed mapping regions. + */ +void __iomem *omap_ioremap(unsigned long p, size_t size, unsigned int type) +{ +#ifdef CONFIG_ARCH_OMAP1 + if (cpu_class_is_omap1()) { + if (BETWEEN(p, IO_PHYS, IO_SIZE)) + return XLATE(p, IO_PHYS, IO_VIRT); + } + if (cpu_is_omap730()) { + if (BETWEEN(p, OMAP730_DSP_BASE, OMAP730_DSP_SIZE)) + return XLATE(p, OMAP730_DSP_BASE, OMAP730_DSP_START); + + if (BETWEEN(p, OMAP730_DSPREG_BASE, OMAP730_DSPREG_SIZE)) + return XLATE(p, OMAP730_DSPREG_BASE, + OMAP730_DSPREG_START); + } + if (cpu_is_omap15xx()) { + if (BETWEEN(p, OMAP1510_DSP_BASE, OMAP1510_DSP_SIZE)) + return XLATE(p, OMAP1510_DSP_BASE, OMAP1510_DSP_START); + + if (BETWEEN(p, OMAP1510_DSPREG_BASE, OMAP1510_DSPREG_SIZE)) + return XLATE(p, OMAP1510_DSPREG_BASE, + OMAP1510_DSPREG_START); + } + if (cpu_is_omap16xx()) { + if (BETWEEN(p, OMAP16XX_DSP_BASE, OMAP16XX_DSP_SIZE)) + return XLATE(p, OMAP16XX_DSP_BASE, OMAP16XX_DSP_START); + + if (BETWEEN(p, OMAP16XX_DSPREG_BASE, OMAP16XX_DSPREG_SIZE)) + return XLATE(p, OMAP16XX_DSPREG_BASE, + OMAP16XX_DSPREG_START); + } +#endif +#ifdef CONFIG_ARCH_OMAP2 + if (cpu_class_is_omap2()) { + if (BETWEEN(p, L3_24XX_PHYS, L3_24XX_SIZE)) + return XLATE(p, L3_24XX_PHYS, L3_24XX_VIRT); + if (BETWEEN(p, L4_24XX_PHYS, L4_24XX_SIZE)) + return XLATE(p, L4_24XX_PHYS, L4_24XX_VIRT); + if (BETWEEN(p, DSP_MEM_24XX_PHYS, DSP_MEM_24XX_SIZE)) + return XLATE(p, DSP_MEM_24XX_PHYS, DSP_MEM_24XX_VIRT); + if (BETWEEN(p, DSP_IPI_24XX_PHYS, DSP_IPI_24XX_SIZE)) + return XLATE(p, DSP_IPI_24XX_PHYS, DSP_IPI_24XX_SIZE); + if (BETWEEN(p, DSP_MMU_24XX_PHYS, DSP_MMU_24XX_SIZE)) + return XLATE(p, DSP_MMU_24XX_PHYS, DSP_MMU_24XX_VIRT); + } +#ifdef CONFIG_ARCH_OMAP2430 + if (cpu_is_omap2430()) { + if (BETWEEN(p, L4_WK_243X_PHYS, L4_WK_243X_SIZE)) + return XLATE(L4_WK_243X_PHYS, L4_WK_243X_VIRT); + if (BETWEEN(p, OMAP243X_GPMC_PHYS, OMAP243X_GPMC_SIZE)) + return XLATE(OMAP243X_GPMC_PHYS, OMAP243X_GPMC_VIRT); + } +#endif +#endif + + return __arm_ioremap(p, size, type); +} +EXPORT_SYMBOL(omap_ioremap); + +void omap_iounmap(volatile void __iomem *addr) +{ + unsigned long virt = (unsigned long)addr; + + if (virt >= VMALLOC_START && virt < VMALLOC_END) + __iounmap(addr); +} +EXPORT_SYMBOL(omap_iounmap); -- cgit v1.2.3-70-g09d2 From d592dd1adc4f57171fa2570a94279d887b78d5b5 Mon Sep 17 00:00:00 2001 From: Russell King Date: Thu, 4 Sep 2008 14:25:42 +0100 Subject: [ARM] omap: convert mcbsp to use ioremap() Signed-off-by: Russell King --- arch/arm/mach-omap1/mcbsp.c | 8 ------- arch/arm/mach-omap2/mcbsp.c | 4 ---- arch/arm/plat-omap/include/mach/mcbsp.h | 3 +-- arch/arm/plat-omap/mcbsp.c | 42 +++++++++++++++++++++------------ 4 files changed, 28 insertions(+), 29 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap1/mcbsp.c b/arch/arm/mach-omap1/mcbsp.c index 2baeaeb0c90..afb5789f94f 100644 --- a/arch/arm/mach-omap1/mcbsp.c +++ b/arch/arm/mach-omap1/mcbsp.c @@ -160,7 +160,6 @@ static struct omap_mcbsp_ops omap1_mcbsp_ops = { static struct omap_mcbsp_platform_data omap730_mcbsp_pdata[] = { { .phys_base = OMAP730_MCBSP1_BASE, - .virt_base = io_p2v(OMAP730_MCBSP1_BASE), .dma_rx_sync = OMAP_DMA_MCBSP1_RX, .dma_tx_sync = OMAP_DMA_MCBSP1_TX, .rx_irq = INT_730_McBSP1RX, @@ -169,7 +168,6 @@ static struct omap_mcbsp_platform_data omap730_mcbsp_pdata[] = { }, { .phys_base = OMAP730_MCBSP2_BASE, - .virt_base = io_p2v(OMAP730_MCBSP2_BASE), .dma_rx_sync = OMAP_DMA_MCBSP3_RX, .dma_tx_sync = OMAP_DMA_MCBSP3_TX, .rx_irq = INT_730_McBSP2RX, @@ -187,7 +185,6 @@ static struct omap_mcbsp_platform_data omap730_mcbsp_pdata[] = { static struct omap_mcbsp_platform_data omap15xx_mcbsp_pdata[] = { { .phys_base = OMAP1510_MCBSP1_BASE, - .virt_base = OMAP1510_MCBSP1_BASE, .dma_rx_sync = OMAP_DMA_MCBSP1_RX, .dma_tx_sync = OMAP_DMA_MCBSP1_TX, .rx_irq = INT_McBSP1RX, @@ -197,7 +194,6 @@ static struct omap_mcbsp_platform_data omap15xx_mcbsp_pdata[] = { }, { .phys_base = OMAP1510_MCBSP2_BASE, - .virt_base = io_p2v(OMAP1510_MCBSP2_BASE), .dma_rx_sync = OMAP_DMA_MCBSP2_RX, .dma_tx_sync = OMAP_DMA_MCBSP2_TX, .rx_irq = INT_1510_SPI_RX, @@ -206,7 +202,6 @@ static struct omap_mcbsp_platform_data omap15xx_mcbsp_pdata[] = { }, { .phys_base = OMAP1510_MCBSP3_BASE, - .virt_base = OMAP1510_MCBSP3_BASE, .dma_rx_sync = OMAP_DMA_MCBSP3_RX, .dma_tx_sync = OMAP_DMA_MCBSP3_TX, .rx_irq = INT_McBSP3RX, @@ -225,7 +220,6 @@ static struct omap_mcbsp_platform_data omap15xx_mcbsp_pdata[] = { static struct omap_mcbsp_platform_data omap16xx_mcbsp_pdata[] = { { .phys_base = OMAP1610_MCBSP1_BASE, - .virt_base = OMAP1610_MCBSP1_BASE, .dma_rx_sync = OMAP_DMA_MCBSP1_RX, .dma_tx_sync = OMAP_DMA_MCBSP1_TX, .rx_irq = INT_McBSP1RX, @@ -235,7 +229,6 @@ static struct omap_mcbsp_platform_data omap16xx_mcbsp_pdata[] = { }, { .phys_base = OMAP1610_MCBSP2_BASE, - .virt_base = io_p2v(OMAP1610_MCBSP2_BASE), .dma_rx_sync = OMAP_DMA_MCBSP2_RX, .dma_tx_sync = OMAP_DMA_MCBSP2_TX, .rx_irq = INT_1610_McBSP2_RX, @@ -244,7 +237,6 @@ static struct omap_mcbsp_platform_data omap16xx_mcbsp_pdata[] = { }, { .phys_base = OMAP1610_MCBSP3_BASE, - .virt_base = OMAP1610_MCBSP3_BASE, .dma_rx_sync = OMAP_DMA_MCBSP3_RX, .dma_tx_sync = OMAP_DMA_MCBSP3_TX, .rx_irq = INT_McBSP3RX, diff --git a/arch/arm/mach-omap2/mcbsp.c b/arch/arm/mach-omap2/mcbsp.c index b261f1f80b5..709db03b999 100644 --- a/arch/arm/mach-omap2/mcbsp.c +++ b/arch/arm/mach-omap2/mcbsp.c @@ -135,7 +135,6 @@ static struct omap_mcbsp_ops omap2_mcbsp_ops = { static struct omap_mcbsp_platform_data omap24xx_mcbsp_pdata[] = { { .phys_base = OMAP24XX_MCBSP1_BASE, - .virt_base = IO_ADDRESS(OMAP24XX_MCBSP1_BASE), .dma_rx_sync = OMAP24XX_DMA_MCBSP1_RX, .dma_tx_sync = OMAP24XX_DMA_MCBSP1_TX, .rx_irq = INT_24XX_MCBSP1_IRQ_RX, @@ -145,7 +144,6 @@ static struct omap_mcbsp_platform_data omap24xx_mcbsp_pdata[] = { }, { .phys_base = OMAP24XX_MCBSP2_BASE, - .virt_base = IO_ADDRESS(OMAP24XX_MCBSP2_BASE), .dma_rx_sync = OMAP24XX_DMA_MCBSP2_RX, .dma_tx_sync = OMAP24XX_DMA_MCBSP2_TX, .rx_irq = INT_24XX_MCBSP2_IRQ_RX, @@ -164,7 +162,6 @@ static struct omap_mcbsp_platform_data omap24xx_mcbsp_pdata[] = { static struct omap_mcbsp_platform_data omap34xx_mcbsp_pdata[] = { { .phys_base = OMAP34XX_MCBSP1_BASE, - .virt_base = IO_ADDRESS(OMAP34XX_MCBSP1_BASE), .dma_rx_sync = OMAP24XX_DMA_MCBSP1_RX, .dma_tx_sync = OMAP24XX_DMA_MCBSP1_TX, .rx_irq = INT_24XX_MCBSP1_IRQ_RX, @@ -174,7 +171,6 @@ static struct omap_mcbsp_platform_data omap34xx_mcbsp_pdata[] = { }, { .phys_base = OMAP34XX_MCBSP2_BASE, - .virt_base = IO_ADDRESS(OMAP34XX_MCBSP2_BASE), .dma_rx_sync = OMAP24XX_DMA_MCBSP2_RX, .dma_tx_sync = OMAP24XX_DMA_MCBSP2_TX, .rx_irq = INT_24XX_MCBSP2_IRQ_RX, diff --git a/arch/arm/plat-omap/include/mach/mcbsp.h b/arch/arm/plat-omap/include/mach/mcbsp.h index 8fdb95e26fc..a3074f2fb7c 100644 --- a/arch/arm/plat-omap/include/mach/mcbsp.h +++ b/arch/arm/plat-omap/include/mach/mcbsp.h @@ -316,7 +316,6 @@ struct omap_mcbsp_ops { struct omap_mcbsp_platform_data { unsigned long phys_base; - u32 virt_base; u8 dma_rx_sync, dma_tx_sync; u16 rx_irq, tx_irq; struct omap_mcbsp_ops *ops; @@ -326,7 +325,7 @@ struct omap_mcbsp_platform_data { struct omap_mcbsp { struct device *dev; unsigned long phys_base; - u32 io_base; + void __iomem *io_base; u8 id; u8 free; omap_mcbsp_word_length rx_word_length; diff --git a/arch/arm/plat-omap/mcbsp.c b/arch/arm/plat-omap/mcbsp.c index 014d26574bb..e63990fd923 100644 --- a/arch/arm/plat-omap/mcbsp.c +++ b/arch/arm/plat-omap/mcbsp.c @@ -126,7 +126,7 @@ static void omap_mcbsp_rx_dma_callback(int lch, u16 ch_status, void *data) */ void omap_mcbsp_config(unsigned int id, const struct omap_mcbsp_reg_cfg *config) { - u32 io_base; + void __iomem *io_base; if (!omap_mcbsp_check_valid_id(id)) { printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1); @@ -134,8 +134,8 @@ void omap_mcbsp_config(unsigned int id, const struct omap_mcbsp_reg_cfg *config) } io_base = mcbsp[id].io_base; - dev_dbg(mcbsp[id].dev, "Configuring McBSP%d io_base: 0x%8x\n", - mcbsp[id].id, io_base); + dev_dbg(mcbsp[id].dev, "Configuring McBSP%d phys_base: 0x%08lx\n", + mcbsp[id].id, mcbsp[id].phys_base); /* We write the given config */ OMAP_MCBSP_WRITE(io_base, SPCR2, config->spcr2); @@ -273,7 +273,7 @@ EXPORT_SYMBOL(omap_mcbsp_free); */ void omap_mcbsp_start(unsigned int id) { - u32 io_base; + void __iomem *io_base; u16 w; if (!omap_mcbsp_check_valid_id(id)) { @@ -310,7 +310,7 @@ EXPORT_SYMBOL(omap_mcbsp_start); void omap_mcbsp_stop(unsigned int id) { - u32 io_base; + void __iomem *io_base; u16 w; if (!omap_mcbsp_check_valid_id(id)) { @@ -337,7 +337,7 @@ EXPORT_SYMBOL(omap_mcbsp_stop); /* polled mcbsp i/o operations */ int omap_mcbsp_pollwrite(unsigned int id, u16 buf) { - u32 base; + void __iomem *base; if (!omap_mcbsp_check_valid_id(id)) { printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1); @@ -379,7 +379,7 @@ EXPORT_SYMBOL(omap_mcbsp_pollwrite); int omap_mcbsp_pollread(unsigned int id, u16 *buf) { - u32 base; + void __iomem *base; if (!omap_mcbsp_check_valid_id(id)) { printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1); @@ -424,7 +424,7 @@ EXPORT_SYMBOL(omap_mcbsp_pollread); */ void omap_mcbsp_xmit_word(unsigned int id, u32 word) { - u32 io_base; + void __iomem *io_base; omap_mcbsp_word_length word_length; if (!omap_mcbsp_check_valid_id(id)) { @@ -445,7 +445,7 @@ EXPORT_SYMBOL(omap_mcbsp_xmit_word); u32 omap_mcbsp_recv_word(unsigned int id) { - u32 io_base; + void __iomem *io_base; u16 word_lsb, word_msb = 0; omap_mcbsp_word_length word_length; @@ -469,7 +469,7 @@ EXPORT_SYMBOL(omap_mcbsp_recv_word); int omap_mcbsp_spi_master_xmit_word_poll(unsigned int id, u32 word) { - u32 io_base; + void __iomem *io_base; omap_mcbsp_word_length tx_word_length; omap_mcbsp_word_length rx_word_length; u16 spcr2, spcr1, attempts = 0, word_lsb, word_msb = 0; @@ -534,7 +534,8 @@ EXPORT_SYMBOL(omap_mcbsp_spi_master_xmit_word_poll); int omap_mcbsp_spi_master_recv_word_poll(unsigned int id, u32 *word) { - u32 io_base, clock_word = 0; + u32 clock_word = 0; + void __iomem *io_base; omap_mcbsp_word_length tx_word_length; omap_mcbsp_word_length rx_word_length; u16 spcr2, spcr1, attempts = 0, word_lsb, word_msb = 0; @@ -831,7 +832,12 @@ static int __init omap_mcbsp_probe(struct platform_device *pdev) mcbsp[id].dma_rx_lch = -1; mcbsp[id].phys_base = pdata->phys_base; - mcbsp[id].io_base = pdata->virt_base; + mcbsp[id].io_base = ioremap(pdata->phys_base, SZ_4K); + if (!mcbsp[id].io_base) { + ret = -ENOMEM; + goto err_ioremap; + } + /* Default I/O is IRQ based */ mcbsp[id].io_type = OMAP_MCBSP_IRQ_IO; mcbsp[id].tx_irq = pdata->tx_irq; @@ -842,18 +848,22 @@ static int __init omap_mcbsp_probe(struct platform_device *pdev) if (pdata->clk_name) mcbsp[id].clk = clk_get(&pdev->dev, pdata->clk_name); if (IS_ERR(mcbsp[id].clk)) { - mcbsp[id].free = 0; dev_err(&pdev->dev, "Invalid clock configuration for McBSP%d.\n", mcbsp[id].id); - ret = -EINVAL; - goto exit; + ret = PTR_ERR(mcbsp[id].clk); + goto err_clk; } mcbsp[id].pdata = pdata; mcbsp[id].dev = &pdev->dev; platform_set_drvdata(pdev, &mcbsp[id]); + return 0; +err_clk: + iounmap(mcbsp[id].io_base); +err_ioremap: + mcbsp[id].free = 0; exit: return ret; } @@ -872,6 +882,8 @@ static int omap_mcbsp_remove(struct platform_device *pdev) clk_disable(mcbsp->clk); clk_put(mcbsp->clk); + iounmap(mcbsp->io_base); + mcbsp->clk = NULL; mcbsp->free = 0; mcbsp->dev = NULL; -- cgit v1.2.3-70-g09d2 From e8a91c953fca683ef9a9335fb00d6eb3e49ac1ee Mon Sep 17 00:00:00 2001 From: Russell King Date: Mon, 1 Sep 2008 22:07:37 +0100 Subject: [ARM] omap: Fix IO_ADDRESS() macros OMAP1_IO_ADDRESS(), OMAP2_IO_ADDRESS() and IO_ADDRESS() returns cookies for use with __raw_{read|write}* for accessing registers. Therefore, these macros should return (void __iomem *) cookies, not integer values. Doing this improves typechecking, and means we can find those places where, eg, DMA controllers are incorrectly given virtual addresses to DMA to, or physical addresses are thrown through a virtual to physical address translation. Signed-off-by: Russell King --- arch/arm/mach-omap1/serial.c | 12 ++++---- arch/arm/mach-omap2/cm.h | 2 +- arch/arm/mach-omap2/gpmc.c | 6 ++-- arch/arm/mach-omap2/id.c | 6 ++-- arch/arm/mach-omap2/irq.c | 4 +-- arch/arm/mach-omap2/prm.h | 2 +- arch/arm/mach-omap2/serial.c | 14 ++++----- arch/arm/plat-omap/common.c | 36 +++++++++++----------- arch/arm/plat-omap/dma.c | 6 ++-- arch/arm/plat-omap/dmtimer.c | 2 +- arch/arm/plat-omap/include/mach/control.h | 6 ++-- arch/arm/plat-omap/include/mach/io.h | 50 +++++++++++++++++-------------- arch/arm/plat-omap/include/mach/pm.h | 4 +-- arch/arm/plat-omap/include/mach/sdrc.h | 6 ++-- drivers/video/omap/dispc.c | 6 ++-- 15 files changed, 82 insertions(+), 80 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap1/serial.c b/arch/arm/mach-omap1/serial.c index 0e25a996bb4..4965986b4ad 100644 --- a/arch/arm/mach-omap1/serial.c +++ b/arch/arm/mach-omap1/serial.c @@ -67,8 +67,8 @@ static void __init omap_serial_reset(struct plat_serial8250_port *p) static struct plat_serial8250_port serial_platform_data[] = { { - .membase = (char*)IO_ADDRESS(OMAP_UART1_BASE), - .mapbase = (unsigned long)OMAP_UART1_BASE, + .membase = IO_ADDRESS(OMAP_UART1_BASE), + .mapbase = OMAP_UART1_BASE, .irq = INT_UART1, .flags = UPF_BOOT_AUTOCONF, .iotype = UPIO_MEM, @@ -76,8 +76,8 @@ static struct plat_serial8250_port serial_platform_data[] = { .uartclk = OMAP16XX_BASE_BAUD * 16, }, { - .membase = (char*)IO_ADDRESS(OMAP_UART2_BASE), - .mapbase = (unsigned long)OMAP_UART2_BASE, + .membase = IO_ADDRESS(OMAP_UART2_BASE), + .mapbase = OMAP_UART2_BASE, .irq = INT_UART2, .flags = UPF_BOOT_AUTOCONF, .iotype = UPIO_MEM, @@ -85,8 +85,8 @@ static struct plat_serial8250_port serial_platform_data[] = { .uartclk = OMAP16XX_BASE_BAUD * 16, }, { - .membase = (char*)IO_ADDRESS(OMAP_UART3_BASE), - .mapbase = (unsigned long)OMAP_UART3_BASE, + .membase = IO_ADDRESS(OMAP_UART3_BASE), + .mapbase = OMAP_UART3_BASE, .irq = INT_UART3, .flags = UPF_BOOT_AUTOCONF, .iotype = UPIO_MEM, diff --git a/arch/arm/mach-omap2/cm.h b/arch/arm/mach-omap2/cm.h index 87a44c715aa..65fdf78c91e 100644 --- a/arch/arm/mach-omap2/cm.h +++ b/arch/arm/mach-omap2/cm.h @@ -18,7 +18,7 @@ #ifndef __ASSEMBLER__ #define OMAP_CM_REGADDR(module, reg) \ - (void __iomem *)IO_ADDRESS(OMAP2_CM_BASE + (module) + (reg)) + IO_ADDRESS(OMAP2_CM_BASE + (module) + (reg)) #else #define OMAP2420_CM_REGADDR(module, reg) \ IO_ADDRESS(OMAP2420_CM_BASE + (module) + (reg)) diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c index f51d69bc457..9b4e58ee2ca 100644 --- a/arch/arm/mach-omap2/gpmc.c +++ b/arch/arm/mach-omap2/gpmc.c @@ -64,10 +64,8 @@ static struct resource gpmc_cs_mem[GPMC_CS_NUM]; static DEFINE_SPINLOCK(gpmc_mem_lock); static unsigned gpmc_cs_map; -static void __iomem *gpmc_base = - (void __iomem *) IO_ADDRESS(GPMC_BASE); -static void __iomem *gpmc_cs_base = - (void __iomem *) IO_ADDRESS(GPMC_BASE) + GPMC_CS0; +static void __iomem *gpmc_base = IO_ADDRESS(GPMC_BASE); +static void __iomem *gpmc_cs_base = IO_ADDRESS(GPMC_BASE) + GPMC_CS0; static struct clk *gpmc_fck; diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c index a5d4526ac4d..e53ebe7d58b 100644 --- a/arch/arm/mach-omap2/id.c +++ b/arch/arm/mach-omap2/id.c @@ -21,11 +21,11 @@ #include #if defined(CONFIG_ARCH_OMAP2420) -#define TAP_BASE io_p2v(0x48014000) +#define TAP_BASE IO_ADDRESS(0x48014000) #elif defined(CONFIG_ARCH_OMAP2430) -#define TAP_BASE io_p2v(0x4900A000) +#define TAP_BASE IO_ADDRESS(0x4900A000) #elif defined(CONFIG_ARCH_OMAP34XX) -#define TAP_BASE io_p2v(0x4830A000) +#define TAP_BASE IO_ADDRESS(0x4830A000) #endif #define OMAP_TAP_IDCODE 0x0204 diff --git a/arch/arm/mach-omap2/irq.c b/arch/arm/mach-omap2/irq.c index 9ef15b31d8f..742bd0070e6 100644 --- a/arch/arm/mach-omap2/irq.c +++ b/arch/arm/mach-omap2/irq.c @@ -32,7 +32,7 @@ * for each bank.. when in doubt, consult the TRM. */ static struct omap_irq_bank { - unsigned long base_reg; + void __iomem *base_reg; unsigned int nr_irqs; } __attribute__ ((aligned(4))) irq_banks[] = { { @@ -94,7 +94,7 @@ static void __init omap_irq_bank_init_one(struct omap_irq_bank *bank) unsigned long tmp; tmp = __raw_readl(bank->base_reg + INTC_REVISION) & 0xff; - printk(KERN_INFO "IRQ: Found an INTC at 0x%08lx " + printk(KERN_INFO "IRQ: Found an INTC at 0x%p " "(revision %ld.%ld) with %d interrupts\n", bank->base_reg, tmp >> 4, tmp & 0xf, bank->nr_irqs); diff --git a/arch/arm/mach-omap2/prm.h b/arch/arm/mach-omap2/prm.h index bbf41fc8e9a..026d8a776ae 100644 --- a/arch/arm/mach-omap2/prm.h +++ b/arch/arm/mach-omap2/prm.h @@ -18,7 +18,7 @@ #ifndef __ASSEMBLER__ #define OMAP_PRM_REGADDR(module, reg) \ - (void __iomem *)IO_ADDRESS(OMAP2_PRM_BASE + (module) + (reg)) + IO_ADDRESS(OMAP2_PRM_BASE + (module) + (reg)) #else #define OMAP2420_PRM_REGADDR(module, reg) \ IO_ADDRESS(OMAP2420_PRM_BASE + (module) + (reg)) diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c index adc8a26a8fb..7faa53c3a92 100644 --- a/arch/arm/mach-omap2/serial.c +++ b/arch/arm/mach-omap2/serial.c @@ -32,24 +32,24 @@ static struct clk * uart3_fck = NULL; static struct plat_serial8250_port serial_platform_data[] = { { - .membase = (char *)IO_ADDRESS(OMAP_UART1_BASE), - .mapbase = (unsigned long)OMAP_UART1_BASE, + .membase = IO_ADDRESS(OMAP_UART1_BASE), + .mapbase = OMAP_UART1_BASE, .irq = 72, .flags = UPF_BOOT_AUTOCONF, .iotype = UPIO_MEM, .regshift = 2, .uartclk = OMAP16XX_BASE_BAUD * 16, }, { - .membase = (char *)IO_ADDRESS(OMAP_UART2_BASE), - .mapbase = (unsigned long)OMAP_UART2_BASE, + .membase = IO_ADDRESS(OMAP_UART2_BASE), + .mapbase = OMAP_UART2_BASE, .irq = 73, .flags = UPF_BOOT_AUTOCONF, .iotype = UPIO_MEM, .regshift = 2, .uartclk = OMAP16XX_BASE_BAUD * 16, }, { - .membase = (char *)IO_ADDRESS(OMAP_UART3_BASE), - .mapbase = (unsigned long)OMAP_UART3_BASE, + .membase = IO_ADDRESS(OMAP_UART3_BASE), + .mapbase = OMAP_UART3_BASE, .irq = 74, .flags = UPF_BOOT_AUTOCONF, .iotype = UPIO_MEM, @@ -71,7 +71,7 @@ static inline void serial_write_reg(struct plat_serial8250_port *p, int offset, int value) { offset <<= p->regshift; - __raw_writeb(value, (unsigned long)(p->membase + offset)); + __raw_writeb(value, p->membase + offset); } /* diff --git a/arch/arm/plat-omap/common.c b/arch/arm/plat-omap/common.c index f4dff423ae7..20e8db5fe32 100644 --- a/arch/arm/plat-omap/common.c +++ b/arch/arm/plat-omap/common.c @@ -258,12 +258,12 @@ static void __init __omap2_set_globals(void) #if defined(CONFIG_ARCH_OMAP2420) static struct omap_globals omap242x_globals = { - .tap = (__force void __iomem *)OMAP2_IO_ADDRESS(0x48014000), - .sdrc = (__force void __iomem *)OMAP2_IO_ADDRESS(OMAP2420_SDRC_BASE), - .sms = (__force void __iomem *)OMAP2_IO_ADDRESS(OMAP2420_SMS_BASE), - .ctrl = (__force void __iomem *)OMAP2_IO_ADDRESS(OMAP2420_CTRL_BASE), - .prm = (__force void __iomem *)OMAP2_IO_ADDRESS(OMAP2420_PRM_BASE), - .cm = (__force void __iomem *)OMAP2_IO_ADDRESS(OMAP2420_CM_BASE), + .tap = OMAP2_IO_ADDRESS(0x48014000), + .sdrc = OMAP2_IO_ADDRESS(OMAP2420_SDRC_BASE), + .sms = OMAP2_IO_ADDRESS(OMAP2420_SMS_BASE), + .ctrl = OMAP2_IO_ADDRESS(OMAP2420_CTRL_BASE), + .prm = OMAP2_IO_ADDRESS(OMAP2420_PRM_BASE), + .cm = OMAP2_IO_ADDRESS(OMAP2420_CM_BASE), }; void __init omap2_set_globals_242x(void) @@ -276,12 +276,12 @@ void __init omap2_set_globals_242x(void) #if defined(CONFIG_ARCH_OMAP2430) static struct omap_globals omap243x_globals = { - .tap = (__force void __iomem *)OMAP2_IO_ADDRESS(0x4900a000), - .sdrc = (__force void __iomem *)OMAP2_IO_ADDRESS(OMAP243X_SDRC_BASE), - .sms = (__force void __iomem *)OMAP2_IO_ADDRESS(OMAP243X_SMS_BASE), - .ctrl = (__force void __iomem *)OMAP2_IO_ADDRESS(OMAP243X_CTRL_BASE), - .prm = (__force void __iomem *)OMAP2_IO_ADDRESS(OMAP2430_PRM_BASE), - .cm = (__force void __iomem *)OMAP2_IO_ADDRESS(OMAP2430_CM_BASE), + .tap = OMAP2_IO_ADDRESS(0x4900a000), + .sdrc = OMAP2_IO_ADDRESS(OMAP243X_SDRC_BASE), + .sms = OMAP2_IO_ADDRESS(OMAP243X_SMS_BASE), + .ctrl = OMAP2_IO_ADDRESS(OMAP243X_CTRL_BASE), + .prm = OMAP2_IO_ADDRESS(OMAP2430_PRM_BASE), + .cm = OMAP2_IO_ADDRESS(OMAP2430_CM_BASE), }; void __init omap2_set_globals_243x(void) @@ -294,12 +294,12 @@ void __init omap2_set_globals_243x(void) #if defined(CONFIG_ARCH_OMAP3430) static struct omap_globals omap343x_globals = { - .tap = (__force void __iomem *)OMAP2_IO_ADDRESS(0x4830A000), - .sdrc = (__force void __iomem *)OMAP2_IO_ADDRESS(OMAP343X_SDRC_BASE), - .sms = (__force void __iomem *)OMAP2_IO_ADDRESS(OMAP343X_SMS_BASE), - .ctrl = (__force void __iomem *)OMAP2_IO_ADDRESS(OMAP343X_CTRL_BASE), - .prm = (__force void __iomem *)OMAP2_IO_ADDRESS(OMAP3430_PRM_BASE), - .cm = (__force void __iomem *)OMAP2_IO_ADDRESS(OMAP3430_CM_BASE), + .tap = OMAP2_IO_ADDRESS(0x4830A000), + .sdrc = OMAP2_IO_ADDRESS(OMAP343X_SDRC_BASE), + .sms = OMAP2_IO_ADDRESS(OMAP343X_SMS_BASE), + .ctrl = OMAP2_IO_ADDRESS(OMAP343X_CTRL_BASE), + .prm = OMAP2_IO_ADDRESS(OMAP3430_PRM_BASE), + .cm = OMAP2_IO_ADDRESS(OMAP3430_CM_BASE), }; void __init omap2_set_globals_343x(void) diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c index a63b644ad30..b4057e27187 100644 --- a/arch/arm/plat-omap/dma.c +++ b/arch/arm/plat-omap/dma.c @@ -2297,13 +2297,13 @@ static int __init omap_init_dma(void) int ch, r; if (cpu_class_is_omap1()) { - omap_dma_base = (void __iomem *)IO_ADDRESS(OMAP1_DMA_BASE); + omap_dma_base = IO_ADDRESS(OMAP1_DMA_BASE); dma_lch_count = OMAP1_LOGICAL_DMA_CH_COUNT; } else if (cpu_is_omap24xx()) { - omap_dma_base = (void __iomem *)IO_ADDRESS(OMAP24XX_DMA4_BASE); + omap_dma_base = IO_ADDRESS(OMAP24XX_DMA4_BASE); dma_lch_count = OMAP_DMA4_LOGICAL_DMA_CH_COUNT; } else if (cpu_is_omap34xx()) { - omap_dma_base = (void __iomem *)IO_ADDRESS(OMAP34XX_DMA4_BASE); + omap_dma_base = IO_ADDRESS(OMAP34XX_DMA4_BASE); dma_lch_count = OMAP_DMA4_LOGICAL_DMA_CH_COUNT; } else { pr_err("DMA init failed for unsupported omap\n"); diff --git a/arch/arm/plat-omap/dmtimer.c b/arch/arm/plat-omap/dmtimer.c index 743a4abcd85..df61ad247dc 100644 --- a/arch/arm/plat-omap/dmtimer.c +++ b/arch/arm/plat-omap/dmtimer.c @@ -693,7 +693,7 @@ int __init omap_dm_timer_init(void) for (i = 0; i < dm_timer_count; i++) { timer = &dm_timers[i]; - timer->io_base = (void __iomem *)io_p2v(timer->phys_base); + timer->io_base = IO_ADDRESS(timer->phys_base); #if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) if (cpu_class_is_omap2()) { char clk_name[16]; diff --git a/arch/arm/plat-omap/include/mach/control.h b/arch/arm/plat-omap/include/mach/control.h index e3fd62d9a99..ee378d254cb 100644 --- a/arch/arm/plat-omap/include/mach/control.h +++ b/arch/arm/plat-omap/include/mach/control.h @@ -19,11 +19,11 @@ #include #define OMAP242X_CTRL_REGADDR(reg) \ - (void __iomem *)IO_ADDRESS(OMAP242X_CTRL_BASE + (reg)) + IO_ADDRESS(OMAP242X_CTRL_BASE + (reg)) #define OMAP243X_CTRL_REGADDR(reg) \ - (void __iomem *)IO_ADDRESS(OMAP243X_CTRL_BASE + (reg)) + IO_ADDRESS(OMAP243X_CTRL_BASE + (reg)) #define OMAP343X_CTRL_REGADDR(reg) \ - (void __iomem *)IO_ADDRESS(OMAP343X_CTRL_BASE + (reg)) + IO_ADDRESS(OMAP343X_CTRL_BASE + (reg)) /* * As elsewhere, the "OMAP2_" prefix indicates that the macro is valid for diff --git a/arch/arm/plat-omap/include/mach/io.h b/arch/arm/plat-omap/include/mach/io.h index b9f57ce0ac1..dd0cf069431 100644 --- a/arch/arm/plat-omap/include/mach/io.h +++ b/arch/arm/plat-omap/include/mach/io.h @@ -55,14 +55,13 @@ #if defined(CONFIG_ARCH_OMAP1) -#define IO_PHYS 0xFFFB0000 -#define IO_OFFSET 0x01000000 /* Virtual IO = 0xfefb0000 */ -#define IO_SIZE 0x40000 -#define IO_VIRT (IO_PHYS - IO_OFFSET) -#define IO_ADDRESS(pa) ((pa) - IO_OFFSET) -#define OMAP1_IO_ADDRESS(pa) ((pa) - IO_OFFSET) -#define io_p2v(pa) ((pa) - IO_OFFSET) -#define io_v2p(va) ((va) + IO_OFFSET) +#define IO_PHYS 0xFFFB0000 +#define IO_OFFSET 0x01000000 /* Virtual IO = 0xfefb0000 */ +#define IO_SIZE 0x40000 +#define IO_VIRT (IO_PHYS - IO_OFFSET) +#define __IO_ADDRESS(pa) ((pa) - IO_OFFSET) +#define __OMAP1_IO_ADDRESS(pa) ((pa) - IO_OFFSET) +#define io_v2p(va) ((va) + IO_OFFSET) #elif defined(CONFIG_ARCH_OMAP2) @@ -90,11 +89,10 @@ #endif -#define IO_OFFSET 0x90000000 -#define IO_ADDRESS(pa) ((pa) + IO_OFFSET) /* Works for L3 and L4 */ -#define OMAP2_IO_ADDRESS(pa) ((pa) + IO_OFFSET) /* Works for L3 and L4 */ -#define io_p2v(pa) ((pa) + IO_OFFSET) /* Works for L3 and L4 */ -#define io_v2p(va) ((va) - IO_OFFSET) /* Works for L3 and L4 */ +#define IO_OFFSET 0x90000000 +#define __IO_ADDRESS(pa) ((pa) + IO_OFFSET) /* Works for L3 and L4 */ +#define __OMAP2_IO_ADDRESS(pa) ((pa) + IO_OFFSET) /* Works for L3 and L4 */ +#define io_v2p(va) ((va) - IO_OFFSET) /* Works for L3 and L4 */ /* DSP */ #define DSP_MEM_24XX_PHYS OMAP2420_DSP_MEM_BASE /* 0x58000000 */ @@ -149,9 +147,8 @@ #define IO_OFFSET 0x90000000 -#define IO_ADDRESS(pa) ((pa) + IO_OFFSET)/* Works for L3 and L4 */ -#define OMAP2_IO_ADDRESS(pa) ((pa) + IO_OFFSET)/* Works for L3 and L4 */ -#define io_p2v(pa) ((pa) + IO_OFFSET)/* Works for L3 and L4 */ +#define __IO_ADDRESS(pa) ((pa) + IO_OFFSET)/* Works for L3 and L4 */ +#define __OMAP2_IO_ADDRESS(pa) ((pa) + IO_OFFSET)/* Works for L3 and L4 */ #define io_v2p(va) ((va) - IO_OFFSET)/* Works for L3 and L4 */ /* DSP */ @@ -167,7 +164,14 @@ #endif -#ifndef __ASSEMBLER__ +#define IO_ADDRESS(pa) IOMEM(__IO_ADDRESS(pa)) +#define OMAP1_IO_ADDRESS(pa) IOMEM(__OMAP1_IO_ADDRESS(pa)) +#define OMAP2_IO_ADDRESS(pa) IOMEM(__OMAP2_IO_ADDRESS(pa)) + +#ifdef __ASSEMBLER__ +#define IOMEM(x) x +#else +#define IOMEM(x) ((void __force __iomem *)(x)) /* * Functions to access the OMAP IO region @@ -178,13 +182,13 @@ * - DO NOT use hardcoded virtual addresses to allow changing the * IO address space again if needed */ -#define omap_readb(a) (*(volatile unsigned char *)IO_ADDRESS(a)) -#define omap_readw(a) (*(volatile unsigned short *)IO_ADDRESS(a)) -#define omap_readl(a) (*(volatile unsigned int *)IO_ADDRESS(a)) +#define omap_readb(a) __raw_readb(IO_ADDRESS(a)) +#define omap_readw(a) __raw_readw(IO_ADDRESS(a)) +#define omap_readl(a) __raw_readl(IO_ADDRESS(a)) -#define omap_writeb(v,a) (*(volatile unsigned char *)IO_ADDRESS(a) = (v)) -#define omap_writew(v,a) (*(volatile unsigned short *)IO_ADDRESS(a) = (v)) -#define omap_writel(v,a) (*(volatile unsigned int *)IO_ADDRESS(a) = (v)) +#define omap_writeb(v,a) __raw_writeb(v, IO_ADDRESS(a)) +#define omap_writew(v,a) __raw_writew(v, IO_ADDRESS(a)) +#define omap_writel(v,a) __raw_writel(v, IO_ADDRESS(a)) extern void omap1_map_common_io(void); extern void omap1_init_common_hw(void); diff --git a/arch/arm/plat-omap/include/mach/pm.h b/arch/arm/plat-omap/include/mach/pm.h index bfa09325a5f..6063e9681de 100644 --- a/arch/arm/plat-omap/include/mach/pm.h +++ b/arch/arm/plat-omap/include/mach/pm.h @@ -39,11 +39,11 @@ * Register and offset definitions to be used in PM assembler code * ---------------------------------------------------------------------------- */ -#define CLKGEN_REG_ASM_BASE io_p2v(0xfffece00) +#define CLKGEN_REG_ASM_BASE IO_ADDRESS(0xfffece00) #define ARM_IDLECT1_ASM_OFFSET 0x04 #define ARM_IDLECT2_ASM_OFFSET 0x08 -#define TCMIF_ASM_BASE io_p2v(0xfffecc00) +#define TCMIF_ASM_BASE IO_ADDRESS(0xfffecc00) #define EMIFS_CONFIG_ASM_OFFSET 0x0c #define EMIFF_SDRAM_CONFIG_ASM_OFFSET 0x20 diff --git a/arch/arm/plat-omap/include/mach/sdrc.h b/arch/arm/plat-omap/include/mach/sdrc.h index 787b7acec54..d908eb527c8 100644 --- a/arch/arm/plat-omap/include/mach/sdrc.h +++ b/arch/arm/plat-omap/include/mach/sdrc.h @@ -63,9 +63,9 @@ */ -#define OMAP242X_SMS_REGADDR(reg) (void __iomem *)IO_ADDRESS(OMAP2420_SMS_BASE + reg) -#define OMAP243X_SMS_REGADDR(reg) (void __iomem *)IO_ADDRESS(OMAP243X_SMS_BASE + reg) -#define OMAP343X_SMS_REGADDR(reg) (void __iomem *)IO_ADDRESS(OMAP343X_SMS_BASE + reg) +#define OMAP242X_SMS_REGADDR(reg) IO_ADDRESS(OMAP2420_SMS_BASE + reg) +#define OMAP243X_SMS_REGADDR(reg) IO_ADDRESS(OMAP243X_SMS_BASE + reg) +#define OMAP343X_SMS_REGADDR(reg) IO_ADDRESS(OMAP343X_SMS_BASE + reg) /* SMS register offsets - read/write with sms_{read,write}_reg() */ diff --git a/drivers/video/omap/dispc.c b/drivers/video/omap/dispc.c index 58f624bd22e..dfb72f5e4c9 100644 --- a/drivers/video/omap/dispc.c +++ b/drivers/video/omap/dispc.c @@ -212,9 +212,9 @@ static void enable_rfbi_mode(int enable) dispc_write_reg(DISPC_CONTROL, l); /* Set bypass mode in RFBI module */ - l = __raw_readl(io_p2v(RFBI_CONTROL)); + l = __raw_readl(IO_ADDRESS(RFBI_CONTROL)); l |= enable ? 0 : (1 << 1); - __raw_writel(l, io_p2v(RFBI_CONTROL)); + __raw_writel(l, IO_ADDRESS(RFBI_CONTROL)); } static void set_lcd_data_lines(int data_lines) @@ -1419,7 +1419,7 @@ static int omap_dispc_init(struct omapfb_device *fbdev, int ext_mode, } /* L3 firewall setting: enable access to OCM RAM */ - __raw_writel(0x402000b0, io_p2v(0x680050a0)); + __raw_writel(0x402000b0, IO_ADDRESS(0x680050a0)); if ((r = alloc_palette_ram()) < 0) goto fail2; -- cgit v1.2.3-70-g09d2 From 0062f1048bb6c80d66d55034b49b3d733acc4e3a Mon Sep 17 00:00:00 2001 From: Russell King Date: Thu, 4 Sep 2008 14:29:01 +0100 Subject: [ARM] omap: make sure virtual mmio addresses are __iomem pointer-like Signed-off-by: Russell King --- arch/arm/plat-omap/include/mach/fpga.h | 12 ++++++------ arch/arm/plat-omap/include/mach/hardware.h | 2 +- 2 files changed, 7 insertions(+), 7 deletions(-) (limited to 'arch') diff --git a/arch/arm/plat-omap/include/mach/fpga.h b/arch/arm/plat-omap/include/mach/fpga.h index c92e4b42b28..f1864a652f7 100644 --- a/arch/arm/plat-omap/include/mach/fpga.h +++ b/arch/arm/plat-omap/include/mach/fpga.h @@ -34,9 +34,9 @@ extern void omap1510_fpga_init_irq(void); * --------------------------------------------------------------------------- */ /* maps in the FPGA registers and the ETHR registers */ -#define H2P2_DBG_FPGA_BASE 0xE8000000 /* VA */ -#define H2P2_DBG_FPGA_SIZE SZ_4K /* SIZE */ -#define H2P2_DBG_FPGA_START 0x04000000 /* PA */ +#define H2P2_DBG_FPGA_BASE IOMEM(0xE8000000) /* VA */ +#define H2P2_DBG_FPGA_SIZE SZ_4K /* SIZE */ +#define H2P2_DBG_FPGA_START 0x04000000 /* PA */ #define H2P2_DBG_FPGA_ETHR_START (H2P2_DBG_FPGA_START + 0x300) #define H2P2_DBG_FPGA_FPGA_REV (H2P2_DBG_FPGA_BASE + 0x10) /* FPGA Revision */ @@ -85,9 +85,9 @@ struct h2p2_dbg_fpga { * OMAP-1510 FPGA * --------------------------------------------------------------------------- */ -#define OMAP1510_FPGA_BASE 0xE8000000 /* Virtual */ -#define OMAP1510_FPGA_SIZE SZ_4K -#define OMAP1510_FPGA_START 0x08000000 /* Physical */ +#define OMAP1510_FPGA_BASE IOMEM(0xE8000000) /* VA */ +#define OMAP1510_FPGA_SIZE SZ_4K +#define OMAP1510_FPGA_START 0x08000000 /* PA */ /* Revision */ #define OMAP1510_FPGA_REV_LOW (OMAP1510_FPGA_BASE + 0x0) diff --git a/arch/arm/plat-omap/include/mach/hardware.h b/arch/arm/plat-omap/include/mach/hardware.h index 07f5d7f2152..abb01e471c4 100644 --- a/arch/arm/plat-omap/include/mach/hardware.h +++ b/arch/arm/plat-omap/include/mach/hardware.h @@ -89,7 +89,7 @@ #define DPLL_CTL (0xfffecf00) /* DSP clock control. Must use __raw_readw() and __raw_writew() with these */ -#define DSP_CONFIG_REG_BASE (0xe1008000) +#define DSP_CONFIG_REG_BASE IOMEM(0xe1008000) #define DSP_CKCTL (DSP_CONFIG_REG_BASE + 0x0) #define DSP_IDLECT1 (DSP_CONFIG_REG_BASE + 0x4) #define DSP_IDLECT2 (DSP_CONFIG_REG_BASE + 0x8) -- cgit v1.2.3-70-g09d2 From 397fcaf71783de804b2e1ae3ec41da0c79a89a61 Mon Sep 17 00:00:00 2001 From: Russell King Date: Fri, 5 Sep 2008 15:46:19 +0100 Subject: [ARM] omap: DSP registers don't need to be casted We're now assigning/comparing void __iomem pointers with void __iomem pointer variables. Signed-off-by: Russell King --- arch/arm/mach-omap1/clock.c | 2 +- arch/arm/mach-omap1/clock.h | 6 +++--- 2 files changed, 4 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap1/clock.c b/arch/arm/mach-omap1/clock.c index 5965cf09f8c..51a9be6763f 100644 --- a/arch/arm/mach-omap1/clock.c +++ b/arch/arm/mach-omap1/clock.c @@ -625,7 +625,7 @@ static void __init omap1_clk_disable_unused(struct clk *clk) /* Clocks in the DSP domain need api_ck. Just assume bootloader * has not enabled any DSP clocks */ - if ((u32)clk->enable_reg == DSP_IDLECT2) { + if (clk->enable_reg == DSP_IDLECT2) { printk(KERN_INFO "Skipping reset check for DSP domain " "clock \"%s\"\n", clk->name); return; diff --git a/arch/arm/mach-omap1/clock.h b/arch/arm/mach-omap1/clock.h index 6eadf72828d..5635b511ab6 100644 --- a/arch/arm/mach-omap1/clock.h +++ b/arch/arm/mach-omap1/clock.h @@ -324,7 +324,7 @@ static struct clk dspper_ck = { .parent = &ck_dpll1, .flags = CLOCK_IN_OMAP310 | CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | RATE_CKCTL | VIRTUAL_IO_ADDRESS, - .enable_reg = (void __iomem *)DSP_IDLECT2, + .enable_reg = DSP_IDLECT2, .enable_bit = EN_PERCK, .rate_offset = CKCTL_PERDIV_OFFSET, .recalc = &omap1_ckctl_recalc_dsp_domain, @@ -338,7 +338,7 @@ static struct clk dspxor_ck = { .parent = &ck_ref, .flags = CLOCK_IN_OMAP310 | CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | VIRTUAL_IO_ADDRESS, - .enable_reg = (void __iomem *)DSP_IDLECT2, + .enable_reg = DSP_IDLECT2, .enable_bit = EN_XORPCK, .recalc = &followparent_recalc, .enable = &omap1_clk_enable_dsp_domain, @@ -350,7 +350,7 @@ static struct clk dsptim_ck = { .parent = &ck_ref, .flags = CLOCK_IN_OMAP310 | CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | VIRTUAL_IO_ADDRESS, - .enable_reg = (void __iomem *)DSP_IDLECT2, + .enable_reg = DSP_IDLECT2, .enable_bit = EN_DSPTIMCK, .recalc = &followparent_recalc, .enable = &omap1_clk_enable_dsp_domain, -- cgit v1.2.3-70-g09d2 From 7c7095aa423b9b14038abc08fba84b9d7a33d643 Mon Sep 17 00:00:00 2001 From: Russell King Date: Fri, 5 Sep 2008 15:49:14 +0100 Subject: [ARM] omap: fix inappropriate casting in gpio.c gpio.c wilfully casts physical addresses to void __iomem * and then fixes them up at runtime using: bank->base = IO_ADDRESS(bank->base); where accesses prior to this fixup are via omap_read/omap_write, and after are by __raw_read/__raw_write. This doesn't lend itself to static checking, nor to easy understanding of the code. And so, OMAP_MPUIO_BASE gets to be the right type - integer like since it's a physical address, not a MMIO pointer. Signed-off-by: Russell King --- arch/arm/plat-omap/gpio.c | 70 +++++++++++++++++----------------- arch/arm/plat-omap/include/mach/gpio.h | 2 +- 2 files changed, 36 insertions(+), 36 deletions(-) (limited to 'arch') diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c index 9e1341ebc14..5de70d65092 100644 --- a/arch/arm/plat-omap/gpio.c +++ b/arch/arm/plat-omap/gpio.c @@ -29,7 +29,7 @@ /* * OMAP1510 GPIO registers */ -#define OMAP1510_GPIO_BASE (void __iomem *)0xfffce000 +#define OMAP1510_GPIO_BASE IO_ADDRESS(0xfffce000) #define OMAP1510_GPIO_DATA_INPUT 0x00 #define OMAP1510_GPIO_DATA_OUTPUT 0x04 #define OMAP1510_GPIO_DIR_CONTROL 0x08 @@ -43,10 +43,10 @@ /* * OMAP1610 specific GPIO registers */ -#define OMAP1610_GPIO1_BASE (void __iomem *)0xfffbe400 -#define OMAP1610_GPIO2_BASE (void __iomem *)0xfffbec00 -#define OMAP1610_GPIO3_BASE (void __iomem *)0xfffbb400 -#define OMAP1610_GPIO4_BASE (void __iomem *)0xfffbbc00 +#define OMAP1610_GPIO1_BASE IO_ADDRESS(0xfffbe400) +#define OMAP1610_GPIO2_BASE IO_ADDRESS(0xfffbec00) +#define OMAP1610_GPIO3_BASE IO_ADDRESS(0xfffbb400) +#define OMAP1610_GPIO4_BASE IO_ADDRESS(0xfffbbc00) #define OMAP1610_GPIO_REVISION 0x0000 #define OMAP1610_GPIO_SYSCONFIG 0x0010 #define OMAP1610_GPIO_SYSSTATUS 0x0014 @@ -68,12 +68,12 @@ /* * OMAP730 specific GPIO registers */ -#define OMAP730_GPIO1_BASE (void __iomem *)0xfffbc000 -#define OMAP730_GPIO2_BASE (void __iomem *)0xfffbc800 -#define OMAP730_GPIO3_BASE (void __iomem *)0xfffbd000 -#define OMAP730_GPIO4_BASE (void __iomem *)0xfffbd800 -#define OMAP730_GPIO5_BASE (void __iomem *)0xfffbe000 -#define OMAP730_GPIO6_BASE (void __iomem *)0xfffbe800 +#define OMAP730_GPIO1_BASE IO_ADDRESS(0xfffbc000) +#define OMAP730_GPIO2_BASE IO_ADDRESS(0xfffbc800) +#define OMAP730_GPIO3_BASE IO_ADDRESS(0xfffbd000) +#define OMAP730_GPIO4_BASE IO_ADDRESS(0xfffbd800) +#define OMAP730_GPIO5_BASE IO_ADDRESS(0xfffbe000) +#define OMAP730_GPIO6_BASE IO_ADDRESS(0xfffbe800) #define OMAP730_GPIO_DATA_INPUT 0x00 #define OMAP730_GPIO_DATA_OUTPUT 0x04 #define OMAP730_GPIO_DIR_CONTROL 0x08 @@ -84,16 +84,16 @@ /* * omap24xx specific GPIO registers */ -#define OMAP242X_GPIO1_BASE (void __iomem *)0x48018000 -#define OMAP242X_GPIO2_BASE (void __iomem *)0x4801a000 -#define OMAP242X_GPIO3_BASE (void __iomem *)0x4801c000 -#define OMAP242X_GPIO4_BASE (void __iomem *)0x4801e000 +#define OMAP242X_GPIO1_BASE IO_ADDRESS(0x48018000) +#define OMAP242X_GPIO2_BASE IO_ADDRESS(0x4801a000) +#define OMAP242X_GPIO3_BASE IO_ADDRESS(0x4801c000) +#define OMAP242X_GPIO4_BASE IO_ADDRESS(0x4801e000) -#define OMAP243X_GPIO1_BASE (void __iomem *)0x4900C000 -#define OMAP243X_GPIO2_BASE (void __iomem *)0x4900E000 -#define OMAP243X_GPIO3_BASE (void __iomem *)0x49010000 -#define OMAP243X_GPIO4_BASE (void __iomem *)0x49012000 -#define OMAP243X_GPIO5_BASE (void __iomem *)0x480B6000 +#define OMAP243X_GPIO1_BASE IO_ADDRESS(0x4900C000) +#define OMAP243X_GPIO2_BASE IO_ADDRESS(0x4900E000) +#define OMAP243X_GPIO3_BASE IO_ADDRESS(0x49010000) +#define OMAP243X_GPIO4_BASE IO_ADDRESS(0x49012000) +#define OMAP243X_GPIO5_BASE IO_ADDRESS(0x480B6000) #define OMAP24XX_GPIO_REVISION 0x0000 #define OMAP24XX_GPIO_SYSCONFIG 0x0010 @@ -123,13 +123,14 @@ * omap34xx specific GPIO registers */ -#define OMAP34XX_GPIO1_BASE (void __iomem *)0x48310000 -#define OMAP34XX_GPIO2_BASE (void __iomem *)0x49050000 -#define OMAP34XX_GPIO3_BASE (void __iomem *)0x49052000 -#define OMAP34XX_GPIO4_BASE (void __iomem *)0x49054000 -#define OMAP34XX_GPIO5_BASE (void __iomem *)0x49056000 -#define OMAP34XX_GPIO6_BASE (void __iomem *)0x49058000 +#define OMAP34XX_GPIO1_BASE IO_ADDRESS(0x48310000) +#define OMAP34XX_GPIO2_BASE IO_ADDRESS(0x49050000) +#define OMAP34XX_GPIO3_BASE IO_ADDRESS(0x49052000) +#define OMAP34XX_GPIO4_BASE IO_ADDRESS(0x49054000) +#define OMAP34XX_GPIO5_BASE IO_ADDRESS(0x49056000) +#define OMAP34XX_GPIO6_BASE IO_ADDRESS(0x49058000) +#define OMAP_MPUIO_VBASE IO_ADDRESS(OMAP_MPUIO_BASE) struct gpio_bank { void __iomem *base; @@ -161,7 +162,7 @@ struct gpio_bank { #ifdef CONFIG_ARCH_OMAP16XX static struct gpio_bank gpio_bank_1610[5] = { - { OMAP_MPUIO_BASE, INT_MPUIO, IH_MPUIO_BASE, METHOD_MPUIO}, + { OMAP_MPUIO_VBASE, INT_MPUIO, IH_MPUIO_BASE, METHOD_MPUIO}, { OMAP1610_GPIO1_BASE, INT_GPIO_BANK1, IH_GPIO_BASE, METHOD_GPIO_1610 }, { OMAP1610_GPIO2_BASE, INT_1610_GPIO_BANK2, IH_GPIO_BASE + 16, METHOD_GPIO_1610 }, { OMAP1610_GPIO3_BASE, INT_1610_GPIO_BANK3, IH_GPIO_BASE + 32, METHOD_GPIO_1610 }, @@ -171,14 +172,14 @@ static struct gpio_bank gpio_bank_1610[5] = { #ifdef CONFIG_ARCH_OMAP15XX static struct gpio_bank gpio_bank_1510[2] = { - { OMAP_MPUIO_BASE, INT_MPUIO, IH_MPUIO_BASE, METHOD_MPUIO }, + { OMAP_MPUIO_VBASE, INT_MPUIO, IH_MPUIO_BASE, METHOD_MPUIO }, { OMAP1510_GPIO_BASE, INT_GPIO_BANK1, IH_GPIO_BASE, METHOD_GPIO_1510 } }; #endif #ifdef CONFIG_ARCH_OMAP730 static struct gpio_bank gpio_bank_730[7] = { - { OMAP_MPUIO_BASE, INT_730_MPUIO, IH_MPUIO_BASE, METHOD_MPUIO }, + { OMAP_MPUIO_VBASE, INT_730_MPUIO, IH_MPUIO_BASE, METHOD_MPUIO }, { OMAP730_GPIO1_BASE, INT_730_GPIO_BANK1, IH_GPIO_BASE, METHOD_GPIO_730 }, { OMAP730_GPIO2_BASE, INT_730_GPIO_BANK2, IH_GPIO_BASE + 32, METHOD_GPIO_730 }, { OMAP730_GPIO3_BASE, INT_730_GPIO_BANK3, IH_GPIO_BASE + 64, METHOD_GPIO_730 }, @@ -1393,7 +1394,7 @@ static int __init _omap_gpio_init(void) gpio_bank_count = 5; gpio_bank = gpio_bank_1610; - rev = omap_readw(gpio_bank[1].base + OMAP1610_GPIO_REVISION); + rev = __raw_readw(gpio_bank[1].base + OMAP1610_GPIO_REVISION); printk(KERN_INFO "OMAP GPIO hardware version %d.%d\n", (rev >> 4) & 0x0f, rev & 0x0f); } @@ -1412,7 +1413,7 @@ static int __init _omap_gpio_init(void) gpio_bank_count = 4; gpio_bank = gpio_bank_242x; - rev = omap_readl(gpio_bank[0].base + OMAP24XX_GPIO_REVISION); + rev = __raw_readl(gpio_bank[0].base + OMAP24XX_GPIO_REVISION); printk(KERN_INFO "OMAP242x GPIO hardware version %d.%d\n", (rev >> 4) & 0x0f, rev & 0x0f); } @@ -1421,7 +1422,7 @@ static int __init _omap_gpio_init(void) gpio_bank_count = 5; gpio_bank = gpio_bank_243x; - rev = omap_readl(gpio_bank[0].base + OMAP24XX_GPIO_REVISION); + rev = __raw_readl(gpio_bank[0].base + OMAP24XX_GPIO_REVISION); printk(KERN_INFO "OMAP243x GPIO hardware version %d.%d\n", (rev >> 4) & 0x0f, rev & 0x0f); } @@ -1432,7 +1433,7 @@ static int __init _omap_gpio_init(void) gpio_bank_count = OMAP34XX_NR_GPIOS; gpio_bank = gpio_bank_34xx; - rev = omap_readl(gpio_bank[0].base + OMAP24XX_GPIO_REVISION); + rev = __raw_readl(gpio_bank[0].base + OMAP24XX_GPIO_REVISION); printk(KERN_INFO "OMAP34xx GPIO hardware version %d.%d\n", (rev >> 4) & 0x0f, rev & 0x0f); } @@ -1441,10 +1442,9 @@ static int __init _omap_gpio_init(void) int j, gpio_count = 16; bank = &gpio_bank[i]; - bank->base = IO_ADDRESS(bank->base); spin_lock_init(&bank->lock); if (bank_is_mpuio(bank)) - omap_writew(0xFFFF, OMAP_MPUIO_BASE + OMAP_MPUIO_GPIO_MASKIT); + __raw_writew(0xffff, bank->base + OMAP_MPUIO_GPIO_MASKIT); if (cpu_is_omap15xx() && bank->method == METHOD_GPIO_1510) { __raw_writew(0xffff, bank->base + OMAP1510_GPIO_INT_MASK); __raw_writew(0x0000, bank->base + OMAP1510_GPIO_INT_STATUS); diff --git a/arch/arm/plat-omap/include/mach/gpio.h b/arch/arm/plat-omap/include/mach/gpio.h index 94ce2780e8e..4cb818da672 100644 --- a/arch/arm/plat-omap/include/mach/gpio.h +++ b/arch/arm/plat-omap/include/mach/gpio.h @@ -29,7 +29,7 @@ #include #include -#define OMAP_MPUIO_BASE (void __iomem *)0xfffb5000 +#define OMAP_MPUIO_BASE 0xfffb5000 #ifdef CONFIG_ARCH_OMAP730 #define OMAP_MPUIO_INPUT_LATCH 0x00 -- cgit v1.2.3-70-g09d2 From c0fc18c5bf016a9d56aee64974c1ccdb87f3c783 Mon Sep 17 00:00:00 2001 From: Russell King Date: Fri, 5 Sep 2008 15:10:27 +0100 Subject: [ARM] omap: fix lots of 'Using plain integer as NULL pointer' Signed-off-by: Russell King --- arch/arm/mach-omap1/clock.c | 8 ++++---- arch/arm/mach-omap2/clock.c | 18 +++++++++--------- arch/arm/mach-omap2/serial.c | 2 +- arch/arm/plat-omap/dma.c | 2 +- drivers/video/omap/omapfb_main.c | 6 +++--- 5 files changed, 18 insertions(+), 18 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap1/clock.c b/arch/arm/mach-omap1/clock.c index 51a9be6763f..90ae0ef37d6 100644 --- a/arch/arm/mach-omap1/clock.c +++ b/arch/arm/mach-omap1/clock.c @@ -201,7 +201,7 @@ static int calc_dsor_exp(struct clk *clk, unsigned long rate) return -EINVAL; parent = clk->parent; - if (unlikely(parent == 0)) + if (unlikely(parent == NULL)) return -EIO; realrate = parent->rate; @@ -499,7 +499,7 @@ static int omap1_clk_enable_generic(struct clk *clk) if (clk->flags & ALWAYS_ENABLED) return 0; - if (unlikely(clk->enable_reg == 0)) { + if (unlikely(clk->enable_reg == NULL)) { printk(KERN_ERR "clock.c: Enable for %s without enable code\n", clk->name); return -EINVAL; @@ -535,7 +535,7 @@ static void omap1_clk_disable_generic(struct clk *clk) __u16 regval16; __u32 regval32; - if (clk->enable_reg == 0) + if (clk->enable_reg == NULL) return; if (clk->flags & ENABLE_REG_32BIT) { @@ -577,7 +577,7 @@ static long omap1_clk_round_rate(struct clk *clk, unsigned long rate) return clk->parent->rate / (1 << dsor_exp); } - if(clk->round_rate != 0) + if (clk->round_rate != NULL) return clk->round_rate(clk, rate); return clk->rate; diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c index 1d891e4a693..84cd1d9fcef 100644 --- a/arch/arm/mach-omap2/clock.c +++ b/arch/arm/mach-omap2/clock.c @@ -251,7 +251,7 @@ int _omap2_clk_enable(struct clk *clk) if (clk->enable) return clk->enable(clk); - if (unlikely(clk->enable_reg == 0)) { + if (unlikely(clk->enable_reg == NULL)) { printk(KERN_ERR "clock.c: Enable for %s without enable code\n", clk->name); return 0; /* REVISIT: -EINVAL */ @@ -283,7 +283,7 @@ void _omap2_clk_disable(struct clk *clk) return; } - if (clk->enable_reg == 0) { + if (clk->enable_reg == NULL) { /* * 'Independent' here refers to a clock which is not * controlled by its parent. @@ -477,7 +477,7 @@ long omap2_clksel_round_rate(struct clk *clk, unsigned long target_rate) /* Given a clock and a rate apply a clock specific rounding function */ long omap2_clk_round_rate(struct clk *clk, unsigned long rate) { - if (clk->round_rate != 0) + if (clk->round_rate != NULL) return clk->round_rate(clk, rate); if (clk->flags & RATE_FIXED) @@ -566,7 +566,7 @@ u32 omap2_divisor_to_clksel(struct clk *clk, u32 div) */ void __iomem *omap2_get_clksel(struct clk *clk, u32 *field_mask) { - if (unlikely((clk->clksel_reg == 0) || (clk->clksel_mask == 0))) + if (unlikely((clk->clksel_reg == NULL) || (clk->clksel_mask == NULL))) return NULL; *field_mask = clk->clksel_mask; @@ -586,7 +586,7 @@ u32 omap2_clksel_get_divisor(struct clk *clk) void __iomem *div_addr; div_addr = omap2_get_clksel(clk, &field_mask); - if (div_addr == 0) + if (div_addr == NULL) return 0; field_val = __raw_readl(div_addr) & field_mask; @@ -605,7 +605,7 @@ int omap2_clksel_set_rate(struct clk *clk, unsigned long rate) return -EINVAL; div_addr = omap2_get_clksel(clk, &field_mask); - if (div_addr == 0) + if (div_addr == NULL) return -EINVAL; field_val = omap2_divisor_to_clksel(clk, new_div); @@ -643,7 +643,7 @@ int omap2_clk_set_rate(struct clk *clk, unsigned long rate) return -EINVAL; /* dpll_ck, core_ck, virt_prcm_set; plus all clksel clocks */ - if (clk->set_rate != 0) + if (clk->set_rate != NULL) ret = clk->set_rate(clk, rate); if (unlikely(ret == 0 && (clk->flags & RATE_PROPAGATES))) @@ -664,7 +664,7 @@ static u32 omap2_clksel_get_src_field(void __iomem **src_addr, const struct clksel_rate *clkr; *parent_div = 0; - *src_addr = 0; + *src_addr = NULL; clks = omap2_get_clksel_by_parent(clk, src_clk); if (clks == NULL) @@ -705,7 +705,7 @@ int omap2_clk_set_parent(struct clk *clk, struct clk *new_parent) field_val = omap2_clksel_get_src_field(&src_addr, new_parent, &field_mask, clk, &parent_div); - if (src_addr == 0) + if (src_addr == NULL) return -EINVAL; if (clk->usecount > 0) diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c index 7faa53c3a92..69651cf0830 100644 --- a/arch/arm/mach-omap2/serial.c +++ b/arch/arm/mach-omap2/serial.c @@ -108,7 +108,7 @@ void __init omap_serial_init() struct plat_serial8250_port *p = serial_platform_data + i; if (!(info->enabled_uarts & (1 << i))) { - p->membase = 0; + p->membase = NULL; p->mapbase = 0; continue; } diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c index b4057e27187..50f8b4ad9a0 100644 --- a/arch/arm/plat-omap/dma.c +++ b/arch/arm/plat-omap/dma.c @@ -1233,7 +1233,7 @@ int omap_request_dma_chain(int dev_id, const char *dev_name, /* request and reserve DMA channels for the chain */ for (i = 0; i < no_of_chans; i++) { err = omap_request_dma(dev_id, dev_name, - callback, 0, &channels[i]); + callback, NULL, &channels[i]); if (err < 0) { int j; for (j = 0; j < i; j++) diff --git a/drivers/video/omap/omapfb_main.c b/drivers/video/omap/omapfb_main.c index 51a138bd113..06a69e0345d 100644 --- a/drivers/video/omap/omapfb_main.c +++ b/drivers/video/omap/omapfb_main.c @@ -740,7 +740,7 @@ static int omapfb_update_win(struct fb_info *fbi, int ret; omapfb_rqueue_lock(plane->fbdev); - ret = omapfb_update_window_async(fbi, win, NULL, 0); + ret = omapfb_update_window_async(fbi, win, NULL, NULL); omapfb_rqueue_unlock(plane->fbdev); return ret; @@ -768,7 +768,7 @@ static int omapfb_update_full_screen(struct fb_info *fbi) win.format = 0; omapfb_rqueue_lock(fbdev); - r = fbdev->ctrl->update_window(fbi, &win, NULL, 0); + r = fbdev->ctrl->update_window(fbi, &win, NULL, NULL); omapfb_rqueue_unlock(fbdev); return r; @@ -1047,7 +1047,7 @@ void omapfb_write_first_pixel(struct omapfb_device *fbdev, u16 pixval) win.height = 2; win.out_width = 2; win.out_height = 2; - fbdev->ctrl->update_window(fbdev->fb_info[0], &win, NULL, 0); + fbdev->ctrl->update_window(fbdev->fb_info[0], &win, NULL, NULL); } omapfb_rqueue_unlock(fbdev); } -- cgit v1.2.3-70-g09d2 From 6e81176dc8b7ec20da9f48b9be076e83f5d7d2ec Mon Sep 17 00:00:00 2001 From: Jouni Hogander Date: Mon, 6 Oct 2008 15:49:15 +0300 Subject: ARM: OMAP2 Provide function to enable/disable uart clocks This patch adds common function to enable/disable omap2/3 uart clocks. Enabled uarts are passed by bootloader in atags and clocks for these enabled uarts are touched. Signed-off-by: Jouni Hogander Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/serial.c | 100 +++++++++++++------------------ arch/arm/plat-omap/include/mach/common.h | 1 + arch/arm/plat-omap/include/mach/serial.h | 6 ++ 3 files changed, 47 insertions(+), 60 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c index 69651cf0830..78ab2be7024 100644 --- a/arch/arm/mach-omap2/serial.c +++ b/arch/arm/mach-omap2/serial.c @@ -3,7 +3,7 @@ * * OMAP2 serial support. * - * Copyright (C) 2005 Nokia Corporation + * Copyright (C) 2005-2008 Nokia Corporation * Author: Paul Mundt * * Based off of arch/arm/mach-omap/omap1/serial.c @@ -23,12 +23,8 @@ #include #include -static struct clk * uart1_ick = NULL; -static struct clk * uart1_fck = NULL; -static struct clk * uart2_ick = NULL; -static struct clk * uart2_fck = NULL; -static struct clk * uart3_ick = NULL; -static struct clk * uart3_fck = NULL; +static struct clk *uart_ick[OMAP_MAX_NR_PORTS]; +static struct clk *uart_fck[OMAP_MAX_NR_PORTS]; static struct plat_serial8250_port serial_platform_data[] = { { @@ -38,7 +34,7 @@ static struct plat_serial8250_port serial_platform_data[] = { .flags = UPF_BOOT_AUTOCONF, .iotype = UPIO_MEM, .regshift = 2, - .uartclk = OMAP16XX_BASE_BAUD * 16, + .uartclk = OMAP24XX_BASE_BAUD * 16, }, { .membase = IO_ADDRESS(OMAP_UART2_BASE), .mapbase = OMAP_UART2_BASE, @@ -46,7 +42,7 @@ static struct plat_serial8250_port serial_platform_data[] = { .flags = UPF_BOOT_AUTOCONF, .iotype = UPIO_MEM, .regshift = 2, - .uartclk = OMAP16XX_BASE_BAUD * 16, + .uartclk = OMAP24XX_BASE_BAUD * 16, }, { .membase = IO_ADDRESS(OMAP_UART3_BASE), .mapbase = OMAP_UART3_BASE, @@ -54,7 +50,7 @@ static struct plat_serial8250_port serial_platform_data[] = { .flags = UPF_BOOT_AUTOCONF, .iotype = UPIO_MEM, .regshift = 2, - .uartclk = OMAP16XX_BASE_BAUD * 16, + .uartclk = OMAP24XX_BASE_BAUD * 16, }, { .flags = 0 } @@ -87,10 +83,27 @@ static inline void __init omap_serial_reset(struct plat_serial8250_port *p) serial_write_reg(p, UART_OMAP_SYSC, (0x02 << 3) | (1 << 2) | (1 << 0)); } -void __init omap_serial_init() +void omap_serial_enable_clocks(int enable) +{ + int i; + for (i = 0; i < OMAP_MAX_NR_PORTS; i++) { + if (uart_ick[i] && uart_fck[i]) { + if (enable) { + clk_enable(uart_ick[i]); + clk_enable(uart_fck[i]); + } else { + clk_disable(uart_ick[i]); + clk_disable(uart_fck[i]); + } + } + } +} + +void __init omap_serial_init(void) { int i; const struct omap_uart_config *info; + char name[16]; /* * Make sure the serial ports are muxed on at this point. @@ -98,8 +111,7 @@ void __init omap_serial_init() * if not needed. */ - info = omap_get_config(OMAP_TAG_UART, - struct omap_uart_config); + info = omap_get_config(OMAP_TAG_UART, struct omap_uart_config); if (info == NULL) return; @@ -113,53 +125,21 @@ void __init omap_serial_init() continue; } - switch (i) { - case 0: - uart1_ick = clk_get(NULL, "uart1_ick"); - if (IS_ERR(uart1_ick)) - printk("Could not get uart1_ick\n"); - else { - clk_enable(uart1_ick); - } - - uart1_fck = clk_get(NULL, "uart1_fck"); - if (IS_ERR(uart1_fck)) - printk("Could not get uart1_fck\n"); - else { - clk_enable(uart1_fck); - } - break; - case 1: - uart2_ick = clk_get(NULL, "uart2_ick"); - if (IS_ERR(uart2_ick)) - printk("Could not get uart2_ick\n"); - else { - clk_enable(uart2_ick); - } - - uart2_fck = clk_get(NULL, "uart2_fck"); - if (IS_ERR(uart2_fck)) - printk("Could not get uart2_fck\n"); - else { - clk_enable(uart2_fck); - } - break; - case 2: - uart3_ick = clk_get(NULL, "uart3_ick"); - if (IS_ERR(uart3_ick)) - printk("Could not get uart3_ick\n"); - else { - clk_enable(uart3_ick); - } - - uart3_fck = clk_get(NULL, "uart3_fck"); - if (IS_ERR(uart3_fck)) - printk("Could not get uart3_fck\n"); - else { - clk_enable(uart3_fck); - } - break; - } + sprintf(name, "uart%d_ick", i+1); + uart_ick[i] = clk_get(NULL, name); + if (IS_ERR(uart_ick[i])) { + printk(KERN_ERR "Could not get uart%d_ick\n", i+1); + uart_ick[i] = NULL; + } else + clk_enable(uart_ick[i]); + + sprintf(name, "uart%d_fck", i+1); + uart_fck[i] = clk_get(NULL, name); + if (IS_ERR(uart_fck[i])) { + printk(KERN_ERR "Could not get uart%d_fck\n", i+1); + uart_fck[i] = NULL; + } else + clk_enable(uart_fck[i]); omap_serial_reset(p); } diff --git a/arch/arm/plat-omap/include/mach/common.h b/arch/arm/plat-omap/include/mach/common.h index 06093112b66..515c6286582 100644 --- a/arch/arm/plat-omap/include/mach/common.h +++ b/arch/arm/plat-omap/include/mach/common.h @@ -34,6 +34,7 @@ struct sys_timer; extern void omap_map_common_io(void); extern struct sys_timer omap_timer; extern void omap_serial_init(void); +extern void omap_serial_enable_clocks(int enable); #ifdef CONFIG_I2C_OMAP extern int omap_register_i2c_bus(int bus_id, u32 clkrate, struct i2c_board_info const *info, diff --git a/arch/arm/plat-omap/include/mach/serial.h b/arch/arm/plat-omap/include/mach/serial.h index 515b89bee96..8a676a04be4 100644 --- a/arch/arm/plat-omap/include/mach/serial.h +++ b/arch/arm/plat-omap/include/mach/serial.h @@ -20,11 +20,17 @@ #define OMAP_UART1_BASE 0x4806a000 #define OMAP_UART2_BASE 0x4806c000 #define OMAP_UART3_BASE 0x4806e000 +#elif defined(CONFIG_ARCH_OMAP3) +/* OMAP3 serial ports */ +#define OMAP_UART1_BASE 0x4806a000 +#define OMAP_UART2_BASE 0x4806c000 +#define OMAP_UART3_BASE 0x49020000 #endif #define OMAP_MAX_NR_PORTS 3 #define OMAP1510_BASE_BAUD (12000000/16) #define OMAP16XX_BASE_BAUD (48000000/16) +#define OMAP24XX_BASE_BAUD (48000000/16) #define is_omap_port(pt) ({int __ret = 0; \ if ((pt)->port.mapbase == OMAP_UART1_BASE || \ -- cgit v1.2.3-70-g09d2 From 1835f1d720786138c43147448f4527dd380c1e33 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Mon, 6 Oct 2008 15:49:15 +0300 Subject: ARM: OMAP2: Move sleep.S into sleep24xx.S Some register offsets are different for 242x and 243x. This will allow compiling sleep code for both chips into the same kernel. Pass the addresses for SDRC_DDLA_CTRL and SDRC_POWER to the omap24xx_cpu_suspend instead of loading the values since the only. Also fix a bug to call omap2_sram_suspend with the value of SDRC_DLLA_CTRL instead of the address as that's what omap24xx_cpu_suspend expects to determine between DDR and SDR. This bug has not been noticed as the boards seem to have DDR instead of SDR. Note that some PM patches are still missing. The PM patches will be added later on once the base files are in sync with linux-omap tree. Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/Makefile | 5 +- arch/arm/mach-omap2/sleep.S | 128 ----------------------------------- arch/arm/mach-omap2/sleep24xx.S | 126 ++++++++++++++++++++++++++++++++++ arch/arm/plat-omap/include/mach/pm.h | 3 +- 4 files changed, 132 insertions(+), 130 deletions(-) delete mode 100644 arch/arm/mach-omap2/sleep.S create mode 100644 arch/arm/mach-omap2/sleep24xx.S (limited to 'arch') diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index e7cf1b4357c..800639e7c6a 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -14,7 +14,10 @@ obj-$(CONFIG_ARCH_OMAP2420) += sram242x.o obj-$(CONFIG_ARCH_OMAP2430) += sram243x.o # Power Management -obj-$(CONFIG_PM) += pm.o sleep.o +ifeq ($(CONFIG_PM),y) +obj-y += pm.o +obj-$(CONFIG_ARCH_OMAP24XX) += sleep24xx.o +endif # Clock framework obj-$(CONFIG_ARCH_OMAP2) += clock24xx.o diff --git a/arch/arm/mach-omap2/sleep.S b/arch/arm/mach-omap2/sleep.S deleted file mode 100644 index 87a706fd5f8..00000000000 --- a/arch/arm/mach-omap2/sleep.S +++ /dev/null @@ -1,128 +0,0 @@ -/* - * linux/arch/arm/mach-omap2/sleep.S - * - * (C) Copyright 2004 - * Texas Instruments, - * Richard Woodruff - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include -#include -#include -#include - -#include "sdrc.h" - -/* First address of reserved address space? apparently valid for OMAP2 & 3 */ -#define A_SDRC0_V (0xC0000000) - - .text - -/* - * Forces OMAP into idle state - * - * omap24xx_idle_loop_suspend() - This bit of code just executes the WFI - * for normal idles. - * - * Note: This code get's copied to internal SRAM at boot. When the OMAP - * wakes up it continues execution at the point it went to sleep. - */ -ENTRY(omap24xx_idle_loop_suspend) - stmfd sp!, {r0, lr} @ save registers on stack - mov r0, #0 @ clear for mcr setup - mcr p15, 0, r0, c7, c0, 4 @ wait for interrupt - ldmfd sp!, {r0, pc} @ restore regs and return - -ENTRY(omap24xx_idle_loop_suspend_sz) - .word . - omap24xx_idle_loop_suspend - -/* - * omap242x_cpu_suspend() - Forces OMAP into deep sleep state by completing - * SDRC shutdown then ARM shutdown. Upon wake MPU is back on so just restore - * SDRC. - * - * Input: - * R0 : DLL ctrl value pre-Sleep - * R1 : Processor+Revision - * 2420: 0x21 = 242xES1, 0x26 = 242xES2.2 - * 2430: 0x31 = 2430ES1, 0x32 = 2430ES2 - * - * The if the DPLL is going to AutoIdle. It seems like the DPLL may be back on - * when we get called, but the DLL probably isn't. We will wait a bit more in - * case the DPLL isn't quite there yet. The code will wait on DLL for DDR even - * if in unlocked mode. - * - * For less than 242x-ES2.2 upon wake from a sleep mode where the external - * oscillator was stopped, a timing bug exists where a non-stabilized 12MHz - * clock can pass into the PRCM can cause problems at DSP and IVA. - * To work around this the code will switch to the 32kHz source prior to sleep. - * Post sleep we will shift back to using the DPLL. Apparently, - * CM_IDLEST_CLKGEN does not reflect the full clock change so you need to wait - * 3x12MHz + 3x32kHz clocks for a full switch. - * - * The DLL load value is not kept in RETENTION or OFF. It needs to be restored - * at wake - */ -ENTRY(omap24xx_cpu_suspend) - stmfd sp!, {r0 - r12, lr} @ save registers on stack - mov r3, #0x0 @ clear for mrc call - mcr p15, 0, r3, c7, c10, 4 @ memory barrier, hope SDR/DDR finished - nop - nop - ldr r3, A_SDRC_POWER @ addr of sdrc power - ldr r4, [r3] @ value of sdrc power - orr r4, r4, #0x40 @ enable self refresh on idle req - mov r5, #0x2000 @ set delay (DPLL relock + DLL relock) - str r4, [r3] @ make it so - mov r2, #0 - nop - mcr p15, 0, r2, c7, c0, 4 @ wait for interrupt - nop -loop: - subs r5, r5, #0x1 @ awake, wait just a bit - bne loop - - /* The DPLL has on before we take the DDR out of self refresh */ - bic r4, r4, #0x40 @ now clear self refresh bit. - str r4, [r3] @ put vlaue back. - ldr r4, A_SDRC0 @ make a clock happen - ldr r4, [r4] - nop @ start auto refresh only after clk ok - movs r0, r0 @ see if DDR or SDR - ldrne r1, A_SDRC_DLLA_CTRL_S @ get addr of DLL ctrl - strne r0, [r1] @ rewrite DLLA to force DLL reload - addne r1, r1, #0x8 @ move to DLLB - strne r0, [r1] @ rewrite DLLB to force DLL reload - - mov r5, #0x1000 -loop2: - subs r5, r5, #0x1 - bne loop2 - /* resume*/ - ldmfd sp!, {r0 - r12, pc} @ restore regs and return - -A_SDRC_POWER: - .word OMAP242X_SDRC_REGADDR(SDRC_POWER) -A_SDRC0: - .word A_SDRC0_V -A_SDRC_DLLA_CTRL_S: - .word OMAP242X_SDRC_REGADDR(SDRC_DLLA_CTRL) - -ENTRY(omap24xx_cpu_suspend_sz) - .word . - omap24xx_cpu_suspend - diff --git a/arch/arm/mach-omap2/sleep24xx.S b/arch/arm/mach-omap2/sleep24xx.S new file mode 100644 index 00000000000..43336b93b21 --- /dev/null +++ b/arch/arm/mach-omap2/sleep24xx.S @@ -0,0 +1,126 @@ +/* + * linux/arch/arm/mach-omap2/sleep.S + * + * (C) Copyright 2004 + * Texas Instruments, + * Richard Woodruff + * + * (C) Copyright 2006 Nokia Corporation + * Fixed idle loop sleep + * Igor Stoppa + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include +#include + +#include + +#include "sdrc.h" + +/* First address of reserved address space? apparently valid for OMAP2 & 3 */ +#define A_SDRC0_V (0xC0000000) + + .text + +/* + * Forces OMAP into idle state + * + * omap24xx_idle_loop_suspend() - This bit of code just executes the WFI + * for normal idles. + * + * Note: This code get's copied to internal SRAM at boot. When the OMAP + * wakes up it continues execution at the point it went to sleep. + */ +ENTRY(omap24xx_idle_loop_suspend) + stmfd sp!, {r0, lr} @ save registers on stack + mov r0, #0 @ clear for mcr setup + mcr p15, 0, r0, c7, c0, 4 @ wait for interrupt + ldmfd sp!, {r0, pc} @ restore regs and return + +ENTRY(omap24xx_idle_loop_suspend_sz) + .word . - omap24xx_idle_loop_suspend + +/* + * omap24xx_cpu_suspend() - Forces OMAP into deep sleep state by completing + * SDRC shutdown then ARM shutdown. Upon wake MPU is back on so just restore + * SDRC. + * + * Input: + * R0 : DLL ctrl value pre-Sleep + * R1 : SDRC_DLLA_CTRL + * R2 : SDRC_POWER + * + * The if the DPLL is going to AutoIdle. It seems like the DPLL may be back on + * when we get called, but the DLL probably isn't. We will wait a bit more in + * case the DPLL isn't quite there yet. The code will wait on DLL for DDR even + * if in unlocked mode. + * + * For less than 242x-ES2.2 upon wake from a sleep mode where the external + * oscillator was stopped, a timing bug exists where a non-stabilized 12MHz + * clock can pass into the PRCM can cause problems at DSP and IVA. + * To work around this the code will switch to the 32kHz source prior to sleep. + * Post sleep we will shift back to using the DPLL. Apparently, + * CM_IDLEST_CLKGEN does not reflect the full clock change so you need to wait + * 3x12MHz + 3x32kHz clocks for a full switch. + * + * The DLL load value is not kept in RETENTION or OFF. It needs to be restored + * at wake + */ +ENTRY(omap24xx_cpu_suspend) + stmfd sp!, {r0 - r12, lr} @ save registers on stack + mov r3, #0x0 @ clear for mcr call + mcr p15, 0, r3, c7, c10, 4 @ memory barrier, hope SDR/DDR finished + nop + nop + ldr r4, [r2] @ read SDRC_POWER + orr r4, r4, #0x40 @ enable self refresh on idle req + mov r5, #0x2000 @ set delay (DPLL relock + DLL relock) + str r4, [r2] @ make it so + mov r2, #0 + nop + mcr p15, 0, r2, c7, c0, 4 @ wait for interrupt + nop +loop: + subs r5, r5, #0x1 @ awake, wait just a bit + bne loop + + /* The DPLL has to be on before we take the DDR out of self refresh */ + bic r4, r4, #0x40 @ now clear self refresh bit. + str r4, [r2] @ write to SDRC_POWER + ldr r4, A_SDRC0 @ make a clock happen + ldr r4, [r4] @ read A_SDRC0 + nop @ start auto refresh only after clk ok + movs r0, r0 @ see if DDR or SDR + strne r0, [r1] @ rewrite DLLA to force DLL reload + addne r1, r1, #0x8 @ move to DLLB + strne r0, [r1] @ rewrite DLLB to force DLL reload + + mov r5, #0x1000 +loop2: + subs r5, r5, #0x1 + bne loop2 + /* resume*/ + ldmfd sp!, {r0 - r12, pc} @ restore regs and return + +A_SDRC0: + .word A_SDRC0_V + +ENTRY(omap24xx_cpu_suspend_sz) + .word . - omap24xx_cpu_suspend diff --git a/arch/arm/plat-omap/include/mach/pm.h b/arch/arm/plat-omap/include/mach/pm.h index 6063e9681de..768eb6e7abc 100644 --- a/arch/arm/plat-omap/include/mach/pm.h +++ b/arch/arm/plat-omap/include/mach/pm.h @@ -135,7 +135,8 @@ extern void omap_pm_suspend(void); extern void omap730_cpu_suspend(unsigned short, unsigned short); extern void omap1510_cpu_suspend(unsigned short, unsigned short); extern void omap1610_cpu_suspend(unsigned short, unsigned short); -extern void omap24xx_cpu_suspend(u32 dll_ctrl, u32 cpu_revision); +extern void omap24xx_cpu_suspend(u32 dll_ctrl, void __iomem *sdrc_dlla_ctrl, + void __iomem *sdrc_power); extern void omap730_idle_loop_suspend(void); extern void omap1510_idle_loop_suspend(void); extern void omap1610_idle_loop_suspend(void); -- cgit v1.2.3-70-g09d2 From 0e564848693b06b037ec05e68c9e4b266250789e Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Mon, 6 Oct 2008 15:49:16 +0300 Subject: ARM: OMAP2: Use omap_globals for CPU detection for multi-omap This allows to get rid of the ifdefs and will allow simpler CPU detection in the future. Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/id.c | 39 +++++++++++++++++++------------- arch/arm/plat-omap/common.c | 4 ++++ arch/arm/plat-omap/include/mach/common.h | 2 ++ arch/arm/plat-omap/include/mach/cpu.h | 5 ++++ 4 files changed, 34 insertions(+), 16 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c index e53ebe7d58b..0670c8db010 100644 --- a/arch/arm/mach-omap2/id.c +++ b/arch/arm/mach-omap2/id.c @@ -17,24 +17,15 @@ #include +#include #include #include -#if defined(CONFIG_ARCH_OMAP2420) -#define TAP_BASE IO_ADDRESS(0x48014000) -#elif defined(CONFIG_ARCH_OMAP2430) -#define TAP_BASE IO_ADDRESS(0x4900A000) -#elif defined(CONFIG_ARCH_OMAP34XX) -#define TAP_BASE IO_ADDRESS(0x4830A000) -#endif +static u32 class; +static void __iomem *tap_base; +static u16 tap_prod_id; #define OMAP_TAP_IDCODE 0x0204 -#if defined(CONFIG_ARCH_OMAP34XX) -#define OMAP_TAP_PROD_ID 0x0210 -#else -#define OMAP_TAP_PROD_ID 0x0208 -#endif - #define OMAP_TAP_DIE_ID_0 0x0218 #define OMAP_TAP_DIE_ID_1 0x021C #define OMAP_TAP_DIE_ID_2 0x0220 @@ -93,18 +84,24 @@ static u32 __init read_tap_reg(int reg) * it means its Cortex r0p0 which is 3430 ES1 */ if ((((cpuid >> 4) & 0xFFF) == 0xC08) && ((cpuid & 0xF) == 0x0)) { + + if (reg == tap_prod_id) { + regval = 0x000F00F0; + goto out; + } + switch (reg) { case OMAP_TAP_IDCODE : regval = 0x0B7AE02F; break; /* Making DevType as 0xF in ES1 to differ from ES2 */ - case OMAP_TAP_PROD_ID : regval = 0x000F00F0; break; case OMAP_TAP_DIE_ID_0: regval = 0x01000000; break; case OMAP_TAP_DIE_ID_1: regval = 0x1012d687; break; case OMAP_TAP_DIE_ID_2: regval = 0x00000000; break; case OMAP_TAP_DIE_ID_3: regval = 0x2d2c0000; break; } } else - regval = __raw_readl(TAP_BASE + reg); + regval = __raw_readl(tap_base + reg); +out: return regval; } @@ -203,7 +200,7 @@ void __init omap2_check_revision(void) u8 rev; idcode = read_tap_reg(OMAP_TAP_IDCODE); - prod_id = read_tap_reg(OMAP_TAP_PROD_ID); + prod_id = read_tap_reg(tap_prod_id); hawkeye = (idcode >> 12) & 0xffff; rev = (idcode >> 28) & 0x0f; dev_type = (prod_id >> 16) & 0x0f; @@ -268,3 +265,13 @@ void __init omap2_check_revision(void) } +void __init omap2_set_globals_tap(struct omap_globals *omap2_globals) +{ + class = omap2_globals->class; + tap_base = omap2_globals->tap; + + if (class == 0x3430) + tap_prod_id = 0x0210; + else + tap_prod_id = 0x0208; +} diff --git a/arch/arm/plat-omap/common.c b/arch/arm/plat-omap/common.c index 20e8db5fe32..e3143fe9cb2 100644 --- a/arch/arm/plat-omap/common.c +++ b/arch/arm/plat-omap/common.c @@ -248,6 +248,7 @@ static struct omap_globals *omap2_globals; static void __init __omap2_set_globals(void) { + omap2_set_globals_tap(omap2_globals); omap2_set_globals_memory(omap2_globals); omap2_set_globals_control(omap2_globals); omap2_set_globals_prcm(omap2_globals); @@ -258,6 +259,7 @@ static void __init __omap2_set_globals(void) #if defined(CONFIG_ARCH_OMAP2420) static struct omap_globals omap242x_globals = { + .class = OMAP242X_CLASS, .tap = OMAP2_IO_ADDRESS(0x48014000), .sdrc = OMAP2_IO_ADDRESS(OMAP2420_SDRC_BASE), .sms = OMAP2_IO_ADDRESS(OMAP2420_SMS_BASE), @@ -276,6 +278,7 @@ void __init omap2_set_globals_242x(void) #if defined(CONFIG_ARCH_OMAP2430) static struct omap_globals omap243x_globals = { + .class = OMAP243X_CLASS, .tap = OMAP2_IO_ADDRESS(0x4900a000), .sdrc = OMAP2_IO_ADDRESS(OMAP243X_SDRC_BASE), .sms = OMAP2_IO_ADDRESS(OMAP243X_SMS_BASE), @@ -294,6 +297,7 @@ void __init omap2_set_globals_243x(void) #if defined(CONFIG_ARCH_OMAP3430) static struct omap_globals omap343x_globals = { + .class = OMAP343X_CLASS, .tap = OMAP2_IO_ADDRESS(0x4830A000), .sdrc = OMAP2_IO_ADDRESS(OMAP343X_SDRC_BASE), .sms = OMAP2_IO_ADDRESS(OMAP343X_SMS_BASE), diff --git a/arch/arm/plat-omap/include/mach/common.h b/arch/arm/plat-omap/include/mach/common.h index 515c6286582..ef70e2b0f05 100644 --- a/arch/arm/plat-omap/include/mach/common.h +++ b/arch/arm/plat-omap/include/mach/common.h @@ -50,6 +50,7 @@ static inline int omap_register_i2c_bus(int bus_id, u32 clkrate, /* IO bases for various OMAP processors */ struct omap_globals { + u32 class; /* OMAP class to detect */ void __iomem *tap; /* Control module ID code */ void __iomem *sdrc; /* SDRAM Controller */ void __iomem *sms; /* SDRAM Memory Scheduler */ @@ -63,6 +64,7 @@ void omap2_set_globals_243x(void); void omap2_set_globals_343x(void); /* These get called from omap2_set_globals_xxxx(), do not call these */ +void omap2_set_globals_tap(struct omap_globals *); void omap2_set_globals_memory(struct omap_globals *); void omap2_set_globals_control(struct omap_globals *); void omap2_set_globals_prcm(struct omap_globals *); diff --git a/arch/arm/plat-omap/include/mach/cpu.h b/arch/arm/plat-omap/include/mach/cpu.h index 05aee0eda34..e0464187209 100644 --- a/arch/arm/plat-omap/include/mach/cpu.h +++ b/arch/arm/plat-omap/include/mach/cpu.h @@ -346,9 +346,14 @@ IS_OMAP_TYPE(3430, 0x3430) get_sil_revision(system_rev) /* Various silicon macros defined here */ +#define OMAP242X_CLASS 0x24200000 #define OMAP2420_REV_ES1_0 0x24200000 #define OMAP2420_REV_ES2_0 0x24201000 + +#define OMAP243X_CLASS 0x24300000 #define OMAP2430_REV_ES1_0 0x24300000 + +#define OMAP343X_CLASS 0x34300000 #define OMAP3430_REV_ES1_0 0x34300000 #define OMAP3430_REV_ES2_0 0x34301000 #define OMAP3430_REV_ES2_1 0x34302000 -- cgit v1.2.3-70-g09d2 From 2351872c44be50c27001bbfa91d6e14e3cee8b88 Mon Sep 17 00:00:00 2001 From: Vikram Pandita Date: Mon, 6 Oct 2008 15:49:16 +0300 Subject: ARM: OMAP2: Add pinmux support for omap34xx This patch adds pinmux support for OMAP3. Incorporated review comments from Tony to make mux_value as bit mask. Tested on 3430SDP. Also merge in adding of I2C pins from Jarkko Nikula. Acked-by: Anand Gadiyar Signed-off-by: Vikram Pandita Signed-off-by: Jarkko Nikula Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/mux.c | 202 ++++++++++++++++++++++++++++++++-- arch/arm/plat-omap/include/mach/mux.h | 156 ++++++++++++++++++++++++-- 2 files changed, 339 insertions(+), 19 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c index 443d07fef7f..6188e2f9785 100644 --- a/arch/arm/mach-omap2/mux.c +++ b/arch/arm/mach-omap2/mux.c @@ -1,7 +1,7 @@ /* * linux/arch/arm/mach-omap2/mux.c * - * OMAP2 pin multiplexing configurations + * OMAP2 and OMAP3 pin multiplexing configurations * * Copyright (C) 2004 - 2008 Texas Instruments Inc. * Copyright (C) 2003 - 2008 Nokia Corporation @@ -219,16 +219,179 @@ MUX_CFG_24XX("AD13_2430_MCBSP2_DR_OFF", 0x0131, 0, 0, 0, 1) #define OMAP24XX_PINS_SZ 0 #endif /* CONFIG_ARCH_OMAP24XX */ -#define OMAP24XX_PULL_ENA (1 << 3) -#define OMAP24XX_PULL_UP (1 << 4) +#ifdef CONFIG_ARCH_OMAP34XX +static struct pin_config __initdata_or_module omap34xx_pins[] = { +/* + * Name, reg-offset, + * mux-mode | [active-mode | off-mode] + */ + +/* 34xx I2C */ +MUX_CFG_34XX("K21_34XX_I2C1_SCL", 0x1ba, + OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP) +MUX_CFG_34XX("J21_34XX_I2C1_SDA", 0x1bc, + OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP) +MUX_CFG_34XX("AF15_34XX_I2C2_SCL", 0x1be, + OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP) +MUX_CFG_34XX("AE15_34XX_I2C2_SDA", 0x1c0, + OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP) +MUX_CFG_34XX("AF14_34XX_I2C3_SCL", 0x1c2, + OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP) +MUX_CFG_34XX("AG14_34XX_I2C3_SDA", 0x1c4, + OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP) +MUX_CFG_34XX("AD26_34XX_I2C4_SCL", 0xa00, + OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP) +MUX_CFG_34XX("AE26_34XX_I2C4_SDA", 0xa02, + OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP) + +/* PHY - HSUSB: 12-pin ULPI PHY: Port 1*/ +MUX_CFG_34XX("Y8_3430_USB1HS_PHY_CLK", 0x5da, + OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_OUTPUT) +MUX_CFG_34XX("Y9_3430_USB1HS_PHY_STP", 0x5d8, + OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_OUTPUT) +MUX_CFG_34XX("AA14_3430_USB1HS_PHY_DIR", 0x5ec, + OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN) +MUX_CFG_34XX("AA11_3430_USB1HS_PHY_NXT", 0x5ee, + OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN) +MUX_CFG_34XX("W13_3430_USB1HS_PHY_D0", 0x5dc, + OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN) +MUX_CFG_34XX("W12_3430_USB1HS_PHY_D1", 0x5de, + OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN) +MUX_CFG_34XX("W11_3430_USB1HS_PHY_D2", 0x5e0, + OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN) +MUX_CFG_34XX("Y11_3430_USB1HS_PHY_D3", 0x5ea, + OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN) +MUX_CFG_34XX("W9_3430_USB1HS_PHY_D4", 0x5e4, + OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN) +MUX_CFG_34XX("Y12_3430_USB1HS_PHY_D5", 0x5e6, + OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN) +MUX_CFG_34XX("W8_3430_USB1HS_PHY_D6", 0x5e8, + OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN) +MUX_CFG_34XX("Y13_3430_USB1HS_PHY_D7", 0x5e2, + OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN) + +/* PHY - HSUSB: 12-pin ULPI PHY: Port 2*/ +MUX_CFG_34XX("AA8_3430_USB2HS_PHY_CLK", 0x5f0, + OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_OUTPUT) +MUX_CFG_34XX("AA10_3430_USB2HS_PHY_STP", 0x5f2, + OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_OUTPUT) +MUX_CFG_34XX("AA9_3430_USB2HS_PHY_DIR", 0x5f4, + OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN) +MUX_CFG_34XX("AB11_3430_USB2HS_PHY_NXT", 0x5f6, + OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN) +MUX_CFG_34XX("AB10_3430_USB2HS_PHY_D0", 0x5f8, + OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN) +MUX_CFG_34XX("AB9_3430_USB2HS_PHY_D1", 0x5fa, + OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN) +MUX_CFG_34XX("W3_3430_USB2HS_PHY_D2", 0x1d4, + OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN) +MUX_CFG_34XX("T4_3430_USB2HS_PHY_D3", 0x1de, + OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN) +MUX_CFG_34XX("T3_3430_USB2HS_PHY_D4", 0x1d8, + OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN) +MUX_CFG_34XX("R3_3430_USB2HS_PHY_D5", 0x1da, + OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN) +MUX_CFG_34XX("R4_3430_USB2HS_PHY_D6", 0x1dc, + OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN) +MUX_CFG_34XX("T2_3430_USB2HS_PHY_D7", 0x1d6, + OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN) + +/* TLL - HSUSB: 12-pin TLL Port 1*/ +MUX_CFG_34XX("Y8_3430_USB1HS_TLL_CLK", 0x5da, + OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_OUTPUT) +MUX_CFG_34XX("Y9_3430_USB1HS_TLL_STP", 0x5d8, + OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN) +MUX_CFG_34XX("AA14_3430_USB1HS_TLL_DIR", 0x5ec, + OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_OUTPUT) +MUX_CFG_34XX("AA11_3430_USB1HS_TLL_NXT", 0x5ee, + OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_OUTPUT) +MUX_CFG_34XX("W13_3430_USB1HS_TLL_D0", 0x5dc, + OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN) +MUX_CFG_34XX("W12_3430_USB1HS_TLL_D1", 0x5de, + OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN) +MUX_CFG_34XX("W11_3430_USB1HS_TLL_D2", 0x5e0, + OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN) +MUX_CFG_34XX("Y11_3430_USB1HS_TLL_D3", 0x5ea, + OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN) +MUX_CFG_34XX("W9_3430_USB1HS_TLL_D4", 0x5e4, + OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN) +MUX_CFG_34XX("Y12_3430_USB1HS_TLL_D5", 0x5e6, + OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN) +MUX_CFG_34XX("W8_3430_USB1HS_TLL_D6", 0x5e8, + OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN) +MUX_CFG_34XX("Y13_3430_USB1HS_TLL_D7", 0x5e2, + OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN) + +/* TLL - HSUSB: 12-pin TLL Port 2*/ +MUX_CFG_34XX("AA8_3430_USB2HS_TLL_CLK", 0x5f0, + OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_OUTPUT) +MUX_CFG_34XX("AA10_3430_USB2HS_TLL_STP", 0x5f2, + OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN) +MUX_CFG_34XX("AA9_3430_USB2HS_TLL_DIR", 0x5f4, + OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_OUTPUT) +MUX_CFG_34XX("AB11_3430_USB2HS_TLL_NXT", 0x5f6, + OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_OUTPUT) +MUX_CFG_34XX("AB10_3430_USB2HS_TLL_D0", 0x5f8, + OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN) +MUX_CFG_34XX("AB9_3430_USB2HS_TLL_D1", 0x5fa, + OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN) +MUX_CFG_34XX("W3_3430_USB2HS_TLL_D2", 0x1d4, + OMAP34XX_MUX_MODE2 | OMAP34XX_PIN_INPUT_PULLDOWN) +MUX_CFG_34XX("T4_3430_USB2HS_TLL_D3", 0x1de, + OMAP34XX_MUX_MODE2 | OMAP34XX_PIN_INPUT_PULLDOWN) +MUX_CFG_34XX("T3_3430_USB2HS_TLL_D4", 0x1d8, + OMAP34XX_MUX_MODE2 | OMAP34XX_PIN_INPUT_PULLDOWN) +MUX_CFG_34XX("R3_3430_USB2HS_TLL_D5", 0x1da, + OMAP34XX_MUX_MODE2 | OMAP34XX_PIN_INPUT_PULLDOWN) +MUX_CFG_34XX("R4_3430_USB2HS_TLL_D6", 0x1dc, + OMAP34XX_MUX_MODE2 | OMAP34XX_PIN_INPUT_PULLDOWN) +MUX_CFG_34XX("T2_3430_USB2HS_TLL_D7", 0x1d6, + OMAP34XX_MUX_MODE2 | OMAP34XX_PIN_INPUT_PULLDOWN) + +/* TLL - HSUSB: 12-pin TLL Port 3*/ +MUX_CFG_34XX("AA6_3430_USB3HS_TLL_CLK", 0x180, + OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_OUTPUT) +MUX_CFG_34XX("AB3_3430_USB3HS_TLL_STP", 0x166, + OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN) +MUX_CFG_34XX("AA3_3430_USB3HS_TLL_DIR", 0x168, + OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_OUTPUT) +MUX_CFG_34XX("Y3_3430_USB3HS_TLL_NXT", 0x16a, + OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_OUTPUT) +MUX_CFG_34XX("AA5_3430_USB3HS_TLL_D0", 0x186, + OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN) +MUX_CFG_34XX("Y4_3430_USB3HS_TLL_D1", 0x184, + OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN) +MUX_CFG_34XX("Y5_3430_USB3HS_TLL_D2", 0x188, + OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN) +MUX_CFG_34XX("W5_3430_USB3HS_TLL_D3", 0x18a, + OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN) +MUX_CFG_34XX("AB12_3430_USB3HS_TLL_D4", 0x16c, + OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN) +MUX_CFG_34XX("AB13_3430_USB3HS_TLL_D5", 0x16e, + OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN) +MUX_CFG_34XX("AA13_3430_USB3HS_TLL_D6", 0x170, + OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN) +MUX_CFG_34XX("AA12_3430_USB3HS_TLL_D7", 0x172, + OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN) +}; + +#define OMAP34XX_PINS_SZ ARRAY_SIZE(omap34xx_pins) + +#else +#define omap34xx_pins NULL +#define OMAP34XX_PINS_SZ 0 +#endif /* CONFIG_ARCH_OMAP34XX */ #if defined(CONFIG_OMAP_MUX_DEBUG) || defined(CONFIG_OMAP_MUX_WARNINGS) -void __init_or_module omap2_cfg_debug(const struct pin_config *cfg, u8 reg) +static void __init_or_module omap2_cfg_debug(const struct pin_config *cfg, u16 reg) { u16 orig; u8 warn = 0, debug = 0; - orig = omap_ctrl_readb(cfg->mux_reg); + if (cpu_is_omap24xx()) + orig = omap_ctrl_readb(cfg->mux_reg); + else + orig = omap_ctrl_readw(cfg->mux_reg); #ifdef CONFIG_OMAP_MUX_DEBUG debug = cfg->debug; @@ -254,9 +417,9 @@ int __init_or_module omap24xx_cfg_reg(const struct pin_config *cfg) spin_lock_irqsave(&mux_spin_lock, flags); reg |= cfg->mask & 0x7; if (cfg->pull_val) - reg |= OMAP24XX_PULL_ENA; + reg |= OMAP2_PULL_ENA; if (cfg->pu_pd_val) - reg |= OMAP24XX_PULL_UP; + reg |= OMAP2_PULL_UP; omap2_cfg_debug(cfg, reg); omap_ctrl_writeb(reg, cfg->mux_reg); spin_unlock_irqrestore(&mux_spin_lock, flags); @@ -264,7 +427,26 @@ int __init_or_module omap24xx_cfg_reg(const struct pin_config *cfg) return 0; } #else -#define omap24xx_cfg_reg 0 +#define omap24xx_cfg_reg NULL +#endif + +#ifdef CONFIG_ARCH_OMAP34XX +static int __init_or_module omap34xx_cfg_reg(const struct pin_config *cfg) +{ + static DEFINE_SPINLOCK(mux_spin_lock); + unsigned long flags; + u16 reg = 0; + + spin_lock_irqsave(&mux_spin_lock, flags); + reg |= cfg->mux_val; + omap2_cfg_debug(cfg, reg); + omap_ctrl_writew(reg, cfg->mux_reg); + spin_unlock_irqrestore(&mux_spin_lock, flags); + + return 0; +} +#else +#define omap34xx_cfg_reg NULL #endif int __init omap2_mux_init(void) @@ -273,6 +455,10 @@ int __init omap2_mux_init(void) arch_mux_cfg.pins = omap24xx_pins; arch_mux_cfg.size = OMAP24XX_PINS_SZ; arch_mux_cfg.cfg_reg = omap24xx_cfg_reg; + } else if (cpu_is_omap34xx()) { + arch_mux_cfg.pins = omap34xx_pins; + arch_mux_cfg.size = OMAP34XX_PINS_SZ; + arch_mux_cfg.cfg_reg = omap34xx_cfg_reg; } return omap_mux_register(&arch_mux_cfg); diff --git a/arch/arm/plat-omap/include/mach/mux.h b/arch/arm/plat-omap/include/mach/mux.h index 614b2c1327c..5670d563f37 100644 --- a/arch/arm/plat-omap/include/mach/mux.h +++ b/arch/arm/plat-omap/include/mach/mux.h @@ -125,20 +125,64 @@ .pu_pd_val = pull_mode, \ }, - -#define PULL_DISABLED 0 -#define PULL_ENABLED 1 - -#define PULL_DOWN 0 -#define PULL_UP 1 +/* 24xx/34xx mux bit defines */ +#define OMAP2_PULL_ENA (1 << 3) +#define OMAP2_PULL_UP (1 << 4) +#define OMAP2_ALTELECTRICALSEL (1 << 5) + +/* 34xx specific mux bit defines */ +#define OMAP3_INPUT_EN (1 << 8) +#define OMAP3_OFF_EN (1 << 9) +#define OMAP3_OFFOUT_EN (1 << 10) +#define OMAP3_OFFOUT_VAL (1 << 11) +#define OMAP3_OFF_PULL_EN (1 << 12) +#define OMAP3_OFF_PULL_UP (1 << 13) +#define OMAP3_WAKEUP_EN (1 << 14) + +/* 34xx mux mode options for each pin. See TRM for options */ +#define OMAP34XX_MUX_MODE0 0 +#define OMAP34XX_MUX_MODE1 1 +#define OMAP34XX_MUX_MODE2 2 +#define OMAP34XX_MUX_MODE3 3 +#define OMAP34XX_MUX_MODE4 4 +#define OMAP34XX_MUX_MODE5 5 +#define OMAP34XX_MUX_MODE6 6 +#define OMAP34XX_MUX_MODE7 7 + +/* 34xx active pin states */ +#define OMAP34XX_PIN_OUTPUT 0 +#define OMAP34XX_PIN_INPUT OMAP3_INPUT_EN +#define OMAP34XX_PIN_INPUT_PULLUP (OMAP2_PULL_ENA | OMAP3_INPUT_EN \ + | OMAP2_PULL_UP) +#define OMAP34XX_PIN_INPUT_PULLDOWN (OMAP2_PULL_ENA | OMAP3_INPUT_EN) + +/* 34xx off mode states */ +#define OMAP34XX_PIN_OFF_NONE 0 +#define OMAP34XX_PIN_OFF_OUTPUT_HIGH (OMAP3_OFF_EN | OMAP3_OFFOUT_EN \ + | OMAP3_OFFOUT_VAL) +#define OMAP34XX_PIN_OFF_OUTPUT_LOW (OMAP3_OFF_EN | OMAP3_OFFOUT_EN) +#define OMAP34XX_PIN_OFF_INPUT_PULLUP (OMAP3_OFF_EN | OMAP3_OFF_PULL_EN \ + | OMAP3_OFF_PULL_UP) +#define OMAP34XX_PIN_OFF_INPUT_PULLDOWN (OMAP3_OFF_EN | OMAP3_OFF_PULL_EN) +#define OMAP34XX_PIN_OFF_WAKEUPENABLE OMAP3_WAKEUP_EN + +#define MUX_CFG_34XX(desc, reg_offset, mux_value) { \ + .name = desc, \ + .debug = 0, \ + .mux_reg = reg_offset, \ + .mux_val = mux_value \ +}, struct pin_config { - char *name; - unsigned char busy; - unsigned char debug; + char *name; + const unsigned int mux_reg; + unsigned char debug; - const char *mux_reg_name; - const unsigned int mux_reg; +#if defined(CONFIG_ARCH_OMAP34XX) + u16 mux_val; /* Wake-up, off mode, pull, mux mode */ +#endif + +#if defined(CONFIG_ARCH_OMAP1) || defined(CONFIG_ARCH_OMAP24XX) const unsigned char mask_offset; const unsigned char mask; @@ -150,6 +194,12 @@ struct pin_config { const char *pu_pd_name; const unsigned int pu_pd_reg; const unsigned char pu_pd_val; +#endif + +#if defined(CONFIG_OMAP_MUX_DEBUG) || defined(CONFIG_OMAP_MUX_WARNINGS) + const char *mux_reg_name; +#endif + }; enum omap730_index { @@ -593,6 +643,90 @@ enum omap24xx_index { }; +enum omap34xx_index { + /* 34xx I2C */ + K21_34XX_I2C1_SCL, + J21_34XX_I2C1_SDA, + AF15_34XX_I2C2_SCL, + AE15_34XX_I2C2_SDA, + AF14_34XX_I2C3_SCL, + AG14_34XX_I2C3_SDA, + AD26_34XX_I2C4_SCL, + AE26_34XX_I2C4_SDA, + + /* PHY - HSUSB: 12-pin ULPI PHY: Port 1*/ + Y8_3430_USB1HS_PHY_CLK, + Y9_3430_USB1HS_PHY_STP, + AA14_3430_USB1HS_PHY_DIR, + AA11_3430_USB1HS_PHY_NXT, + W13_3430_USB1HS_PHY_DATA0, + W12_3430_USB1HS_PHY_DATA1, + W11_3430_USB1HS_PHY_DATA2, + Y11_3430_USB1HS_PHY_DATA3, + W9_3430_USB1HS_PHY_DATA4, + Y12_3430_USB1HS_PHY_DATA5, + W8_3430_USB1HS_PHY_DATA6, + Y13_3430_USB1HS_PHY_DATA7, + + /* PHY - HSUSB: 12-pin ULPI PHY: Port 2*/ + AA8_3430_USB2HS_PHY_CLK, + AA10_3430_USB2HS_PHY_STP, + AA9_3430_USB2HS_PHY_DIR, + AB11_3430_USB2HS_PHY_NXT, + AB10_3430_USB2HS_PHY_DATA0, + AB9_3430_USB2HS_PHY_DATA1, + W3_3430_USB2HS_PHY_DATA2, + T4_3430_USB2HS_PHY_DATA3, + T3_3430_USB2HS_PHY_DATA4, + R3_3430_USB2HS_PHY_DATA5, + R4_3430_USB2HS_PHY_DATA6, + T2_3430_USB2HS_PHY_DATA7, + + + /* TLL - HSUSB: 12-pin TLL Port 1*/ + Y8_3430_USB1HS_TLL_CLK, + Y9_3430_USB1HS_TLL_STP, + AA14_3430_USB1HS_TLL_DIR, + AA11_3430_USB1HS_TLL_NXT, + W13_3430_USB1HS_TLL_DATA0, + W12_3430_USB1HS_TLL_DATA1, + W11_3430_USB1HS_TLL_DATA2, + Y11_3430_USB1HS_TLL_DATA3, + W9_3430_USB1HS_TLL_DATA4, + Y12_3430_USB1HS_TLL_DATA5, + W8_3430_USB1HS_TLL_DATA6, + Y13_3430_USB1HS_TLL_DATA7, + + /* TLL - HSUSB: 12-pin TLL Port 2*/ + AA8_3430_USB2HS_TLL_CLK, + AA10_3430_USB2HS_TLL_STP, + AA9_3430_USB2HS_TLL_DIR, + AB11_3430_USB2HS_TLL_NXT, + AB10_3430_USB2HS_TLL_DATA0, + AB9_3430_USB2HS_TLL_DATA1, + W3_3430_USB2HS_TLL_DATA2, + T4_3430_USB2HS_TLL_DATA3, + T3_3430_USB2HS_TLL_DATA4, + R3_3430_USB2HS_TLL_DATA5, + R4_3430_USB2HS_TLL_DATA6, + T2_3430_USB2HS_TLL_DATA7, + + /* TLL - HSUSB: 12-pin TLL Port 3*/ + AA6_3430_USB3HS_TLL_CLK, + AB3_3430_USB3HS_TLL_STP, + AA3_3430_USB3HS_TLL_DIR, + Y3_3430_USB3HS_TLL_NXT, + AA5_3430_USB3HS_TLL_DATA0, + Y4_3430_USB3HS_TLL_DATA1, + Y5_3430_USB3HS_TLL_DATA2, + W5_3430_USB3HS_TLL_DATA3, + AB12_3430_USB3HS_TLL_DATA4, + AB13_3430_USB3HS_TLL_DATA5, + AA13_3430_USB3HS_TLL_DATA6, + AA12_3430_USB3HS_TLL_DATA7 + +}; + struct omap_mux_cfg { struct pin_config *pins; unsigned long size; -- cgit v1.2.3-70-g09d2 From fd1dc87ded0f29c1ba1e8da62f03ab0d591d9bdd Mon Sep 17 00:00:00 2001 From: Paul Walmsley Date: Mon, 6 Oct 2008 15:49:17 +0300 Subject: ARM: OMAP2: Fix sparse, checkpatch warnings fro GPMC code, use ioremap Fix sparse, checkpatch warnings fro GPMC code. Also change to use ioremap, and add missing function prototypes to gpmc.h. Signed-off-by: Paul Walmsley Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/gpmc.c | 81 +++++++++++++++++++++--------- arch/arm/plat-omap/include/mach/gpmc.h | 5 ++ arch/arm/plat-omap/include/mach/omap24xx.h | 1 + 3 files changed, 64 insertions(+), 23 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c index 9b4e58ee2ca..be6a75306f1 100644 --- a/arch/arm/mach-omap2/gpmc.c +++ b/arch/arm/mach-omap2/gpmc.c @@ -9,27 +9,23 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ +#undef DEBUG + #include #include #include #include #include #include +#include #include #include #include -#undef DEBUG - -#ifdef CONFIG_ARCH_OMAP2420 -#define GPMC_BASE 0x6800a000 -#endif - -#ifdef CONFIG_ARCH_OMAP2430 -#define GPMC_BASE 0x6E000000 -#endif +#include "memory.h" +/* GPMC register offsets */ #define GPMC_REVISION 0x00 #define GPMC_SYSCONFIG 0x10 #define GPMC_SYSSTATUS 0x14 @@ -51,7 +47,6 @@ #define GPMC_CS0 0x60 #define GPMC_CS_SIZE 0x30 -#define GPMC_CS_NUM 8 #define GPMC_MEM_START 0x00000000 #define GPMC_MEM_END 0x3FFFFFFF #define BOOT_ROM_SPACE 0x100000 /* 1MB */ @@ -64,10 +59,9 @@ static struct resource gpmc_cs_mem[GPMC_CS_NUM]; static DEFINE_SPINLOCK(gpmc_mem_lock); static unsigned gpmc_cs_map; -static void __iomem *gpmc_base = IO_ADDRESS(GPMC_BASE); -static void __iomem *gpmc_cs_base = IO_ADDRESS(GPMC_BASE) + GPMC_CS0; +static void __iomem *gpmc_base; -static struct clk *gpmc_fck; +static struct clk *gpmc_l3_clk; static void gpmc_write_reg(int idx, u32 val) { @@ -83,19 +77,32 @@ void gpmc_cs_write_reg(int cs, int idx, u32 val) { void __iomem *reg_addr; - reg_addr = gpmc_cs_base + (cs * GPMC_CS_SIZE) + idx; + reg_addr = gpmc_base + GPMC_CS0 + (cs * GPMC_CS_SIZE) + idx; __raw_writel(val, reg_addr); } u32 gpmc_cs_read_reg(int cs, int idx) { - return __raw_readl(gpmc_cs_base + (cs * GPMC_CS_SIZE) + idx); + void __iomem *reg_addr; + + reg_addr = gpmc_base + GPMC_CS0 + (cs * GPMC_CS_SIZE) + idx; + return __raw_readl(reg_addr); } +/* TODO: Add support for gpmc_fck to clock framework and use it */ unsigned long gpmc_get_fclk_period(void) { - /* In picoseconds */ - return 1000000000 / ((clk_get_rate(gpmc_fck)) / 1000); + unsigned long rate = clk_get_rate(gpmc_l3_clk); + + if (rate == 0) { + printk(KERN_WARNING "gpmc_l3_clk not enabled\n"); + return 0; + } + + rate /= 1000; + rate = 1000000000 / rate; /* In picoseconds */ + + return rate; } unsigned int gpmc_ns_to_ticks(unsigned int time_ns) @@ -108,6 +115,11 @@ unsigned int gpmc_ns_to_ticks(unsigned int time_ns) return (time_ns * 1000 + tick_ps - 1) / tick_ps; } +unsigned int gpmc_ticks_to_ns(unsigned int ticks) +{ + return ticks * gpmc_get_fclk_period() / 1000; +} + unsigned int gpmc_round_ns_to_ticks(unsigned int time_ns) { unsigned long ticks = gpmc_ns_to_ticks(time_ns); @@ -348,6 +360,7 @@ out: spin_unlock(&gpmc_mem_lock); return r; } +EXPORT_SYMBOL(gpmc_cs_request); void gpmc_cs_free(int cs) { @@ -363,8 +376,9 @@ void gpmc_cs_free(int cs) gpmc_cs_set_reserved(cs, 0); spin_unlock(&gpmc_mem_lock); } +EXPORT_SYMBOL(gpmc_cs_free); -void __init gpmc_mem_init(void) +static void __init gpmc_mem_init(void) { int cs; unsigned long boot_rom_space = 0; @@ -394,12 +408,33 @@ void __init gpmc_mem_init(void) void __init gpmc_init(void) { u32 l; + char *ck; + + if (cpu_is_omap24xx()) { + ck = "core_l3_ck"; + if (cpu_is_omap2420()) + l = OMAP2420_GPMC_BASE; + else + l = OMAP34XX_GPMC_BASE; + } else if (cpu_is_omap34xx()) { + ck = "gpmc_fck"; + l = OMAP34XX_GPMC_BASE; + } - gpmc_fck = clk_get(NULL, "gpmc_fck"); /* Always on ENABLE_ON_INIT */ - if (IS_ERR(gpmc_fck)) - WARN_ON(1); - else - clk_enable(gpmc_fck); + gpmc_l3_clk = clk_get(NULL, ck); + if (IS_ERR(gpmc_l3_clk)) { + printk(KERN_ERR "Could not get GPMC clock %s\n", ck); + return -ENODEV; + } + + gpmc_base = ioremap(l, SZ_4K); + if (!gpmc_base) { + clk_put(gpmc_l3_clk); + printk(KERN_ERR "Could not get GPMC register memory\n"); + return -ENOMEM; + } + + BUG_ON(IS_ERR(gpmc_l3_clk)); l = gpmc_read_reg(GPMC_REVISION); printk(KERN_INFO "GPMC revision %d.%d\n", (l >> 4) & 0x0f, l & 0x0f); diff --git a/arch/arm/plat-omap/include/mach/gpmc.h b/arch/arm/plat-omap/include/mach/gpmc.h index 6a8e07ffc2d..4258e00c657 100644 --- a/arch/arm/plat-omap/include/mach/gpmc.h +++ b/arch/arm/plat-omap/include/mach/gpmc.h @@ -11,6 +11,9 @@ #ifndef __OMAP2_GPMC_H #define __OMAP2_GPMC_H +/* Maximum Number of Chip Selects */ +#define GPMC_CS_NUM 8 + #define GPMC_CS_CONFIG1 0x00 #define GPMC_CS_CONFIG2 0x04 #define GPMC_CS_CONFIG3 0x08 @@ -81,6 +84,7 @@ struct gpmc_timings { }; extern unsigned int gpmc_ns_to_ticks(unsigned int time_ns); +extern unsigned int gpmc_ticks_to_ns(unsigned int ticks); extern unsigned int gpmc_round_ns_to_ticks(unsigned int time_ns); extern unsigned long gpmc_get_fclk_period(void); @@ -92,5 +96,6 @@ extern int gpmc_cs_request(int cs, unsigned long size, unsigned long *base); extern void gpmc_cs_free(int cs); extern int gpmc_cs_set_reserved(int cs, int reserved); extern int gpmc_cs_reserved(int cs); +extern void gpmc_init(void); #endif diff --git a/arch/arm/plat-omap/include/mach/omap24xx.h b/arch/arm/plat-omap/include/mach/omap24xx.h index bb8319d66e9..556f0eb4d55 100644 --- a/arch/arm/plat-omap/include/mach/omap24xx.h +++ b/arch/arm/plat-omap/include/mach/omap24xx.h @@ -48,6 +48,7 @@ #define OMAP2420_PRM_BASE OMAP2420_CM_BASE #define OMAP2420_SDRC_BASE (L3_24XX_BASE + 0x9000) #define OMAP2420_SMS_BASE 0x68008000 +#define OMAP2420_GPMC_BASE 0x6800a000 #define OMAP2430_32KSYNCT_BASE (L4_WK_243X_BASE + 0x20000) #define OMAP2430_PRCM_BASE (L4_WK_243X_BASE + 0x6000) -- cgit v1.2.3-70-g09d2 From 646e3ed1a349fbccce651fed2d3987f0e7b0f0f4 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Mon, 6 Oct 2008 15:49:36 +0300 Subject: ARM: OMAP2: Misc updates from linux-omap tree Misc updates from linux-omap tree, mostly to update common device initialization and add missing defines from linux-omap tree. Also some changes to make room for adding 34xx in following patches. Note that the I2C resources are now set up in arch/arm/plat-omap/i2c.c helper, and can be removed from devices.c. Signed-off-by: Tony Lindgren --- arch/arm/mach-omap1/devices.c | 2 +- arch/arm/mach-omap2/clock.h | 1 + arch/arm/mach-omap2/devices.c | 225 ++++++++++++++++++------ arch/arm/mach-omap2/gpmc.c | 2 +- arch/arm/mach-omap2/io.c | 19 +- arch/arm/mach-omap2/irq.c | 12 +- arch/arm/mach-omap2/memory.h | 7 + arch/arm/plat-omap/devices.c | 11 +- arch/arm/plat-omap/include/mach/board-2430sdp.h | 6 +- arch/arm/plat-omap/include/mach/board-apollon.h | 6 + arch/arm/plat-omap/include/mach/board-h4.h | 5 +- arch/arm/plat-omap/include/mach/board.h | 2 + arch/arm/plat-omap/include/mach/control.h | 17 +- arch/arm/plat-omap/include/mach/gpio.h | 2 + arch/arm/plat-omap/include/mach/gpmc.h | 3 + arch/arm/plat-omap/include/mach/hardware.h | 2 +- arch/arm/plat-omap/include/mach/irqs.h | 6 + arch/arm/plat-omap/include/mach/omap1510.h | 2 + arch/arm/plat-omap/include/mach/omap16xx.h | 7 +- arch/arm/plat-omap/include/mach/omapfb.h | 3 + arch/arm/plat-omap/include/mach/sdrc.h | 2 + 21 files changed, 256 insertions(+), 86 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap1/devices.c b/arch/arm/mach-omap1/devices.c index ab708d4c597..79cfe0147d9 100644 --- a/arch/arm/mach-omap1/devices.c +++ b/arch/arm/mach-omap1/devices.c @@ -101,7 +101,7 @@ static inline void omap_init_mbox(void) { } #if defined(CONFIG_OMAP_STI) -#define OMAP1_STI_BASE IO_ADDRESS(0xfffea000) +#define OMAP1_STI_BASE 0xfffea000 #define OMAP1_STI_CHANNEL_BASE (OMAP1_STI_BASE + 0x400) static struct resource sti_resources[] = { diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h index ea55f286f47..1fb330e0847 100644 --- a/arch/arm/mach-omap2/clock.h +++ b/arch/arm/mach-omap2/clock.h @@ -21,6 +21,7 @@ /* The maximum error between a target DPLL rate and the rounded rate in Hz */ #define DEFAULT_DPLL_RATE_TOLERANCE 50000 +int omap2_clk_init(void); int omap2_clk_enable(struct clk *clk); void omap2_clk_disable(struct clk *clk); long omap2_clk_round_rate(struct clk *clk, unsigned long rate); diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c index 7a7f0255907..7cca33e23fd 100644 --- a/arch/arm/mach-omap2/devices.c +++ b/arch/arm/mach-omap2/devices.c @@ -23,50 +23,7 @@ #include #include #include - -#if defined(CONFIG_I2C_OMAP) || defined(CONFIG_I2C_OMAP_MODULE) - -#define OMAP2_I2C_BASE2 0x48072000 -#define OMAP2_I2C_INT2 57 - -static struct resource i2c_resources2[] = { - { - .start = OMAP2_I2C_BASE2, - .end = OMAP2_I2C_BASE2 + 0x3f, - .flags = IORESOURCE_MEM, - }, - { - .start = OMAP2_I2C_INT2, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device omap_i2c_device2 = { - .name = "i2c_omap", - .id = 2, - .num_resources = ARRAY_SIZE(i2c_resources2), - .resource = i2c_resources2, -}; - -/* See also arch/arm/plat-omap/devices.c for first I2C on 24xx */ -static void omap_init_i2c(void) -{ - /* REVISIT: Second I2C not in use on H4? */ - if (machine_is_omap_h4()) - return; - - if (!cpu_is_omap2430()) { - omap_cfg_reg(J15_24XX_I2C2_SCL); - omap_cfg_reg(H19_24XX_I2C2_SDA); - } - (void) platform_device_register(&omap_i2c_device2); -} - -#else - -static void omap_init_i2c(void) {} - -#endif +#include #if defined(CONFIG_OMAP_DSP) || defined(CONFIG_OMAP_DSP_MODULE) #define OMAP2_MBOX_BASE IO_ADDRESS(OMAP24XX_MAILBOX_BASE) @@ -104,7 +61,9 @@ static inline void omap_init_mbox(void) { } #if defined(CONFIG_OMAP_STI) -#define OMAP2_STI_BASE IO_ADDRESS(0x48068000) +#if defined(CONFIG_ARCH_OMAP2) + +#define OMAP2_STI_BASE 0x48068000 #define OMAP2_STI_CHANNEL_BASE 0x54000000 #define OMAP2_STI_IRQ 4 @@ -124,6 +83,25 @@ static struct resource sti_resources[] = { .flags = IORESOURCE_IRQ, } }; +#elif defined(CONFIG_ARCH_OMAP3) + +#define OMAP3_SDTI_BASE 0x54500000 +#define OMAP3_SDTI_CHANNEL_BASE 0x54600000 + +static struct resource sti_resources[] = { + { + .start = OMAP3_SDTI_BASE, + .end = OMAP3_SDTI_BASE + 0xFFF, + .flags = IORESOURCE_MEM, + }, + { + .start = OMAP3_SDTI_CHANNEL_BASE, + .end = OMAP3_SDTI_CHANNEL_BASE + SZ_1M - 1, + .flags = IORESOURCE_MEM, + } +}; + +#endif static struct platform_device sti_device = { .name = "sti", @@ -140,12 +118,14 @@ static inline void omap_init_sti(void) static inline void omap_init_sti(void) {} #endif -#if defined(CONFIG_SPI_OMAP24XX) +#if defined(CONFIG_SPI_OMAP24XX) || defined(CONFIG_SPI_OMAP24XX_MODULE) #include #define OMAP2_MCSPI1_BASE 0x48098000 #define OMAP2_MCSPI2_BASE 0x4809a000 +#define OMAP2_MCSPI3_BASE 0x480b8000 +#define OMAP2_MCSPI4_BASE 0x480ba000 static struct omap2_mcspi_platform_config omap2_mcspi1_config = { .num_cs = 4, @@ -159,7 +139,7 @@ static struct resource omap2_mcspi1_resources[] = { }, }; -struct platform_device omap2_mcspi1 = { +static struct platform_device omap2_mcspi1 = { .name = "omap2_mcspi", .id = 1, .num_resources = ARRAY_SIZE(omap2_mcspi1_resources), @@ -181,7 +161,7 @@ static struct resource omap2_mcspi2_resources[] = { }, }; -struct platform_device omap2_mcspi2 = { +static struct platform_device omap2_mcspi2 = { .name = "omap2_mcspi", .id = 2, .num_resources = ARRAY_SIZE(omap2_mcspi2_resources), @@ -191,16 +171,162 @@ struct platform_device omap2_mcspi2 = { }, }; +#if defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP3) +static struct omap2_mcspi_platform_config omap2_mcspi3_config = { + .num_cs = 2, +}; + +static struct resource omap2_mcspi3_resources[] = { + { + .start = OMAP2_MCSPI3_BASE, + .end = OMAP2_MCSPI3_BASE + 0xff, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device omap2_mcspi3 = { + .name = "omap2_mcspi", + .id = 3, + .num_resources = ARRAY_SIZE(omap2_mcspi3_resources), + .resource = omap2_mcspi3_resources, + .dev = { + .platform_data = &omap2_mcspi3_config, + }, +}; +#endif + +#ifdef CONFIG_ARCH_OMAP3 +static struct omap2_mcspi_platform_config omap2_mcspi4_config = { + .num_cs = 1, +}; + +static struct resource omap2_mcspi4_resources[] = { + { + .start = OMAP2_MCSPI4_BASE, + .end = OMAP2_MCSPI4_BASE + 0xff, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device omap2_mcspi4 = { + .name = "omap2_mcspi", + .id = 4, + .num_resources = ARRAY_SIZE(omap2_mcspi4_resources), + .resource = omap2_mcspi4_resources, + .dev = { + .platform_data = &omap2_mcspi4_config, + }, +}; +#endif + static void omap_init_mcspi(void) { platform_device_register(&omap2_mcspi1); platform_device_register(&omap2_mcspi2); +#if defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP3) + platform_device_register(&omap2_mcspi3); +#endif +#ifdef CONFIG_ARCH_OMAP3 + platform_device_register(&omap2_mcspi4); +#endif } #else static inline void omap_init_mcspi(void) {} #endif +#ifdef CONFIG_SND_OMAP24XX_EAC + +#define OMAP2_EAC_BASE 0x48090000 + +static struct resource omap2_eac_resources[] = { + { + .start = OMAP2_EAC_BASE, + .end = OMAP2_EAC_BASE + 0x109, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device omap2_eac_device = { + .name = "omap24xx-eac", + .id = -1, + .num_resources = ARRAY_SIZE(omap2_eac_resources), + .resource = omap2_eac_resources, + .dev = { + .platform_data = NULL, + }, +}; + +void omap_init_eac(struct eac_platform_data *pdata) +{ + omap2_eac_device.dev.platform_data = pdata; + platform_device_register(&omap2_eac_device); +} + +#else +void omap_init_eac(struct eac_platform_data *pdata) {} +#endif + +#ifdef CONFIG_OMAP_SHA1_MD5 +static struct resource sha1_md5_resources[] = { + { + .start = OMAP24XX_SEC_SHA1MD5_BASE, + .end = OMAP24XX_SEC_SHA1MD5_BASE + 0x64, + .flags = IORESOURCE_MEM, + }, + { + .start = INT_24XX_SHA1MD5, + .flags = IORESOURCE_IRQ, + } +}; + +static struct platform_device sha1_md5_device = { + .name = "OMAP SHA1/MD5", + .id = -1, + .num_resources = ARRAY_SIZE(sha1_md5_resources), + .resource = sha1_md5_resources, +}; + +static void omap_init_sha1_md5(void) +{ + platform_device_register(&sha1_md5_device); +} +#else +static inline void omap_init_sha1_md5(void) { } +#endif + +#if defined(CONFIG_HDQ_MASTER_OMAP) || defined(CONFIG_HDQ_MASTER_OMAP_MODULE) +#if defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP3430) +#define OMAP_HDQ_BASE 0x480B2000 +#endif +static struct resource omap_hdq_resources[] = { + { + .start = OMAP_HDQ_BASE, + .end = OMAP_HDQ_BASE + 0x1C, + .flags = IORESOURCE_MEM, + }, + { + .start = INT_24XX_HDQ_IRQ, + .flags = IORESOURCE_IRQ, + }, +}; +static struct platform_device omap_hdq_dev = { + .name = "omap_hdq", + .id = 0, + .dev = { + .platform_data = NULL, + }, + .num_resources = ARRAY_SIZE(omap_hdq_resources), + .resource = omap_hdq_resources, +}; +static inline void omap_hdq_init(void) +{ + (void) platform_device_register(&omap_hdq_dev); +} +#else +static inline void omap_hdq_init(void) {} +#endif + /*-------------------------------------------------------------------------*/ static int __init omap2_init_devices(void) @@ -208,10 +334,11 @@ static int __init omap2_init_devices(void) /* please keep these calls, and their implementations above, * in alphabetical order so they're easier to sort through. */ - omap_init_i2c(); omap_init_mbox(); omap_init_mcspi(); + omap_hdq_init(); omap_init_sti(); + omap_init_sha1_md5(); return 0; } diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c index be6a75306f1..149bfba43cf 100644 --- a/arch/arm/mach-omap2/gpmc.c +++ b/arch/arm/mach-omap2/gpmc.c @@ -23,7 +23,7 @@ #include #include -#include "memory.h" +#include /* GPMC register offsets */ #define GPMC_REVISION 0x00 diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c index 371e5409fef..03c6ab1a3b1 100644 --- a/arch/arm/mach-omap2/io.c +++ b/arch/arm/mach-omap2/io.c @@ -4,8 +4,11 @@ * OMAP2 I/O mapping code * * Copyright (C) 2005 Nokia Corporation - * Author: Juha Yrjölä - * Updated map desc to add 2430 support : + * Copyright (C) 2007 Texas Instruments + * + * Author: + * Juha Yrjola + * Syed Khasim * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -23,6 +26,11 @@ #include #include +#include + +#include "memory.h" + +#include "clock.h" #include @@ -31,13 +39,6 @@ #include #include "clockdomains.h" -extern void omap_sram_init(void); -extern int omap2_clk_init(void); -extern void omap2_check_revision(void); -extern void omap2_init_memory(void); -extern void gpmc_init(void); -extern void omapfb_reserve_sdram(void); - /* * The machine specific code may provide the extra mapping besides the * default mapping provided here. diff --git a/arch/arm/mach-omap2/irq.c b/arch/arm/mach-omap2/irq.c index 742bd0070e6..a5c748a4a56 100644 --- a/arch/arm/mach-omap2/irq.c +++ b/arch/arm/mach-omap2/irq.c @@ -37,11 +37,9 @@ static struct omap_irq_bank { } __attribute__ ((aligned(4))) irq_banks[] = { { /* MPU INTC */ - .base_reg = IO_ADDRESS(OMAP24XX_IC_BASE), + .base_reg = 0, .nr_irqs = 96, - }, { - /* XXX: DSP INTC */ - } + }, }; /* XXX: FIQ and additional INTC support (only MPU at the moment) */ @@ -118,10 +116,8 @@ void __init omap_init_irq(void) for (i = 0; i < ARRAY_SIZE(irq_banks); i++) { struct omap_irq_bank *bank = irq_banks + i; - /* XXX */ - if (!bank->base_reg) - continue; - + if (cpu_is_omap24xx()) + bank->base_reg = IO_ADDRESS(OMAP24XX_IC_BASE); omap_irq_bank_init_one(bank); nr_irqs += bank->nr_irqs; diff --git a/arch/arm/mach-omap2/memory.h b/arch/arm/mach-omap2/memory.h index 9a280b50a89..bb3db80a7c4 100644 --- a/arch/arm/mach-omap2/memory.h +++ b/arch/arm/mach-omap2/memory.h @@ -14,6 +14,9 @@ * published by the Free Software Foundation. */ +#ifndef ARCH_ARM_MACH_OMAP2_MEMORY_H +#define ARCH_ARM_MACH_OMAP2_MEMORY_H + /* Memory timings */ #define M_DDR 1 #define M_LOCK_CTRL (1 << 2) @@ -34,3 +37,7 @@ extern u32 omap2_memory_get_fast_dll_ctrl(void); extern u32 omap2_memory_get_type(void); u32 omap2_dll_force_needed(void); u32 omap2_reprogram_sdrc(u32 level, u32 force); +void __init omap2_init_memory(void); +void __init gpmc_init(void); + +#endif diff --git a/arch/arm/plat-omap/devices.c b/arch/arm/plat-omap/devices.c index 187e3d8bfdf..1c1d831a0c0 100644 --- a/arch/arm/plat-omap/devices.c +++ b/arch/arm/plat-omap/devices.c @@ -20,16 +20,16 @@ #include #include +#include #include #include #include #include #include +#include #if defined(CONFIG_OMAP_DSP) || defined(CONFIG_OMAP_DSP_MODULE) -#include "../plat-omap/dsp/dsp_common.h" - static struct dsp_platform_data dsp_pdata = { .kdev_list = LIST_HEAD_INIT(dsp_pdata.kdev_list), }; @@ -75,7 +75,7 @@ int dsp_kfunc_device_register(struct dsp_kfunc_device *kdev) { static DEFINE_MUTEX(dsp_pdata_lock); - mutex_init(&kdev->lock); + spin_lock_init(&kdev->lock); mutex_lock(&dsp_pdata_lock); list_add_tail(&kdev->entry, &dsp_pdata.kdev_list); @@ -479,10 +479,6 @@ static inline void omap_init_rng(void) {} */ static int __init omap_init_devices(void) { -/* - * Need to enable relevant once for 2430 SDP - */ -#ifndef CONFIG_MACH_OMAP_2430SDP /* please keep these calls, and their implementations above, * in alphabetical order so they're easier to sort through. */ @@ -492,7 +488,6 @@ static int __init omap_init_devices(void) omap_init_uwire(); omap_init_wdt(); omap_init_rng(); -#endif return 0; } arch_initcall(omap_init_devices); diff --git a/arch/arm/plat-omap/include/mach/board-2430sdp.h b/arch/arm/plat-omap/include/mach/board-2430sdp.h index cf1dc022394..10d449ea7ed 100644 --- a/arch/arm/plat-omap/include/mach/board-2430sdp.h +++ b/arch/arm/plat-omap/include/mach/board-2430sdp.h @@ -30,10 +30,12 @@ #define __ASM_ARCH_OMAP_2430SDP_H /* Placeholder for 2430SDP specific defines */ -#define OMAP24XX_ETHR_START 0x08000300 +#define OMAP24XX_ETHR_START 0x08000300 #define OMAP24XX_ETHR_GPIO_IRQ 149 #define SDP2430_CS0_BASE 0x04000000 -#define TWL4030_IRQNUM INT_24XX_SYS_NIRQ +/* Function prototypes */ +extern void sdp2430_flash_init(void); +extern void sdp2430_usb_init(void); #endif /* __ASM_ARCH_OMAP_2430SDP_H */ diff --git a/arch/arm/plat-omap/include/mach/board-apollon.h b/arch/arm/plat-omap/include/mach/board-apollon.h index d6f2a8e963d..731c858cf3f 100644 --- a/arch/arm/plat-omap/include/mach/board-apollon.h +++ b/arch/arm/plat-omap/include/mach/board-apollon.h @@ -31,6 +31,12 @@ extern void apollon_mmc_init(void); +static inline int apollon_plus(void) +{ + /* The apollon plus has IDCODE revision 5 */ + return system_rev & 0xc0; +} + /* Placeholder for APOLLON specific defines */ #define APOLLON_ETHR_GPIO_IRQ 74 diff --git a/arch/arm/plat-omap/include/mach/board-h4.h b/arch/arm/plat-omap/include/mach/board-h4.h index 1470cd3e519..7c3fa0f0a65 100644 --- a/arch/arm/plat-omap/include/mach/board-h4.h +++ b/arch/arm/plat-omap/include/mach/board-h4.h @@ -1,7 +1,7 @@ /* * arch/arm/plat-omap/include/mach/board-h4.h * - * Hardware definitions for TI OMAP1610 H4 board. + * Hardware definitions for TI OMAP2420 H4 board. * * Initial creation by Dirk Behme * @@ -29,6 +29,9 @@ #ifndef __ASM_ARCH_OMAP_H4_H #define __ASM_ARCH_OMAP_H4_H +/* MMC Prototypes */ +extern void h4_mmc_init(void); + /* Placeholder for H4 specific defines */ #define OMAP24XX_ETHR_GPIO_IRQ 92 #endif /* __ASM_ARCH_OMAP_H4_H */ diff --git a/arch/arm/plat-omap/include/mach/board.h b/arch/arm/plat-omap/include/mach/board.h index 54445642f35..c23c12ccb35 100644 --- a/arch/arm/plat-omap/include/mach/board.h +++ b/arch/arm/plat-omap/include/mach/board.h @@ -45,6 +45,8 @@ struct omap_mmc_conf { unsigned cover:1; /* 4 wire signaling is optional, and is only used for SD/SDIO */ unsigned wire4:1; + /* use the internal clock */ + unsigned internal_clock:1; s16 power_pin; s16 switch_pin; s16 wp_pin; diff --git a/arch/arm/plat-omap/include/mach/control.h b/arch/arm/plat-omap/include/mach/control.h index ee378d254cb..dc988676057 100644 --- a/arch/arm/plat-omap/include/mach/control.h +++ b/arch/arm/plat-omap/include/mach/control.h @@ -1,13 +1,10 @@ -#ifndef __ASM_ARCH_CONTROL_H -#define __ASM_ARCH_CONTROL_H - /* * arch/arm/plat-omap/include/mach/control.h * * OMAP2/3 System Control Module definitions * - * Copyright (C) 2007 Texas Instruments, Inc. - * Copyright (C) 2007 Nokia Corporation + * Copyright (C) 2007-2008 Texas Instruments, Inc. + * Copyright (C) 2007-2008 Nokia Corporation * * Written by Paul Walmsley * @@ -16,14 +13,23 @@ * the Free Software Foundation. */ +#ifndef __ASM_ARCH_CONTROL_H +#define __ASM_ARCH_CONTROL_H + #include +#ifndef __ASSEMBLY__ #define OMAP242X_CTRL_REGADDR(reg) \ IO_ADDRESS(OMAP242X_CTRL_BASE + (reg)) #define OMAP243X_CTRL_REGADDR(reg) \ IO_ADDRESS(OMAP243X_CTRL_BASE + (reg)) #define OMAP343X_CTRL_REGADDR(reg) \ IO_ADDRESS(OMAP343X_CTRL_BASE + (reg)) +#else +#define OMAP242X_CTRL_REGADDR(reg) IO_ADDRESS(OMAP242X_CTRL_BASE + (reg)) +#define OMAP243X_CTRL_REGADDR(reg) IO_ADDRESS(OMAP243X_CTRL_BASE + (reg)) +#define OMAP343X_CTRL_REGADDR(reg) IO_ADDRESS(OMAP343X_CTRL_BASE + (reg)) +#endif /* __ASSEMBLY__ */ /* * As elsewhere, the "OMAP2_" prefix indicates that the macro is valid for @@ -134,6 +140,7 @@ #define OMAP343X_CONTROL_TEST_KEY_13 (OMAP2_CONTROL_GENERAL + 0x00fc) #define OMAP343X_CONTROL_IVA2_BOOTADDR (OMAP2_CONTROL_GENERAL + 0x0190) #define OMAP343X_CONTROL_IVA2_BOOTMOD (OMAP2_CONTROL_GENERAL + 0x0194) +#define OMAP343X_CONTROL_TEMP_SENSOR (OMAP2_CONTROL_GENERAL + 0x02b4) /* * REVISIT: This list of registers is not comprehensive - there are more diff --git a/arch/arm/plat-omap/include/mach/gpio.h b/arch/arm/plat-omap/include/mach/gpio.h index 4cb818da672..5bb7460cabc 100644 --- a/arch/arm/plat-omap/include/mach/gpio.h +++ b/arch/arm/plat-omap/include/mach/gpio.h @@ -76,6 +76,8 @@ extern void omap_free_gpio(int gpio); extern void omap_set_gpio_direction(int gpio, int is_input); extern void omap_set_gpio_dataout(int gpio, int enable); extern int omap_get_gpio_datain(int gpio); +extern void omap2_gpio_prepare_for_retention(void); +extern void omap2_gpio_resume_after_retention(void); extern void omap_set_gpio_debounce(int gpio, int enable); extern void omap_set_gpio_debounce_time(int gpio, int enable); diff --git a/arch/arm/plat-omap/include/mach/gpmc.h b/arch/arm/plat-omap/include/mach/gpmc.h index 4258e00c657..3c7b425c585 100644 --- a/arch/arm/plat-omap/include/mach/gpmc.h +++ b/arch/arm/plat-omap/include/mach/gpmc.h @@ -25,6 +25,9 @@ #define GPMC_CS_NAND_ADDRESS 0x20 #define GPMC_CS_NAND_DATA 0x24 +#define GPMC_CONFIG 0x50 +#define GPMC_STATUS 0x54 + #define GPMC_CONFIG1_WRAPBURST_SUPP (1 << 31) #define GPMC_CONFIG1_READMULTIPLE_SUPP (1 << 30) #define GPMC_CONFIG1_READTYPE_ASYNC (0 << 29) diff --git a/arch/arm/plat-omap/include/mach/hardware.h b/arch/arm/plat-omap/include/mach/hardware.h index abb01e471c4..29c849f5f18 100644 --- a/arch/arm/plat-omap/include/mach/hardware.h +++ b/arch/arm/plat-omap/include/mach/hardware.h @@ -282,8 +282,8 @@ #include "omap730.h" #include "omap1510.h" -#include "omap24xx.h" #include "omap16xx.h" +#include "omap24xx.h" #include "omap34xx.h" #ifndef __ASSEMBLER__ diff --git a/arch/arm/plat-omap/include/mach/irqs.h b/arch/arm/plat-omap/include/mach/irqs.h index 17248bbf3f2..e9fd63055cb 100644 --- a/arch/arm/plat-omap/include/mach/irqs.h +++ b/arch/arm/plat-omap/include/mach/irqs.h @@ -125,6 +125,7 @@ #define INT_UART2 (15 + IH2_BASE) #define INT_BT_MCSI1TX (16 + IH2_BASE) #define INT_BT_MCSI1RX (17 + IH2_BASE) +#define INT_SOSSI_MATCH (19 + IH2_BASE) #define INT_USB_W2FC (20 + IH2_BASE) #define INT_1WIRE (21 + IH2_BASE) #define INT_OS_TIMER (22 + IH2_BASE) @@ -176,6 +177,7 @@ #define INT_1610_DMA_CH14 (61 + IH2_BASE) #define INT_1610_DMA_CH15 (62 + IH2_BASE) #define INT_1610_NAND (63 + IH2_BASE) +#define INT_1610_SHA1MD5 (91 + IH2_BASE) /* * OMAP-730 specific IRQ numbers for interrupt handler 2 @@ -263,12 +265,16 @@ #define INT_24XX_GPTIMER10 46 #define INT_24XX_GPTIMER11 47 #define INT_24XX_GPTIMER12 48 +#define INT_24XX_SHA1MD5 51 #define INT_24XX_I2C1_IRQ 56 #define INT_24XX_I2C2_IRQ 57 +#define INT_24XX_HDQ_IRQ 58 #define INT_24XX_MCBSP1_IRQ_TX 59 #define INT_24XX_MCBSP1_IRQ_RX 60 #define INT_24XX_MCBSP2_IRQ_TX 62 #define INT_24XX_MCBSP2_IRQ_RX 63 +#define INT_24XX_SPI1_IRQ 65 +#define INT_24XX_SPI2_IRQ 66 #define INT_24XX_UART1_IRQ 72 #define INT_24XX_UART2_IRQ 73 #define INT_24XX_UART3_IRQ 74 diff --git a/arch/arm/plat-omap/include/mach/omap1510.h b/arch/arm/plat-omap/include/mach/omap1510.h index 505a38af8b2..d2400466813 100644 --- a/arch/arm/plat-omap/include/mach/omap1510.h +++ b/arch/arm/plat-omap/include/mach/omap1510.h @@ -44,5 +44,7 @@ #define OMAP1510_DSPREG_SIZE SZ_128K #define OMAP1510_DSPREG_START 0xE1000000 +#define OMAP1510_DSP_MMU_BASE (0xfffed200) + #endif /* __ASM_ARCH_OMAP15XX_H */ diff --git a/arch/arm/plat-omap/include/mach/omap16xx.h b/arch/arm/plat-omap/include/mach/omap16xx.h index c6c93afb278..0e69b504c25 100644 --- a/arch/arm/plat-omap/include/mach/omap16xx.h +++ b/arch/arm/plat-omap/include/mach/omap16xx.h @@ -44,6 +44,11 @@ #define OMAP16XX_DSPREG_SIZE SZ_128K #define OMAP16XX_DSPREG_START 0xE1000000 +#define OMAP16XX_SEC_BASE 0xFFFE4000 +#define OMAP16XX_SEC_DES (OMAP16XX_SEC_BASE + 0x0000) +#define OMAP16XX_SEC_SHA1MD5 (OMAP16XX_SEC_BASE + 0x0800) +#define OMAP16XX_SEC_RNG (OMAP16XX_SEC_BASE + 0x1000) + /* * --------------------------------------------------------------------------- * Interrupts @@ -190,7 +195,7 @@ #define WSPR_DISABLE_0 (0x0000aaaa) #define WSPR_DISABLE_1 (0x00005555) -/* Mailbox */ +#define OMAP16XX_DSP_MMU_BASE (0xfffed200) #define OMAP16XX_MAILBOX_BASE (0xfffcf000) #endif /* __ASM_ARCH_OMAP16XX_H */ diff --git a/arch/arm/plat-omap/include/mach/omapfb.h b/arch/arm/plat-omap/include/mach/omapfb.h index cae037d1307..ec67fb42860 100644 --- a/arch/arm/plat-omap/include/mach/omapfb.h +++ b/arch/arm/plat-omap/include/mach/omapfb.h @@ -62,6 +62,7 @@ #define OMAPFB_CAPS_WINDOW_PIXEL_DOUBLE 0x00010000 #define OMAPFB_CAPS_WINDOW_SCALE 0x00020000 #define OMAPFB_CAPS_WINDOW_OVERLAY 0x00040000 +#define OMAPFB_CAPS_WINDOW_ROTATE 0x00080000 #define OMAPFB_CAPS_SET_BACKLIGHT 0x01000000 /* Values from DSP must map to lower 16-bits */ @@ -305,6 +306,7 @@ struct lcd_ctrl { int screen_width, int pos_x, int pos_y, int width, int height, int color_mode); + int (*set_rotate) (int angle); int (*setup_mem) (int plane, size_t size, int mem_type, unsigned long *paddr); int (*mmap) (struct fb_info *info, @@ -374,6 +376,7 @@ extern struct lcd_ctrl omap1_lcd_ctrl; extern struct lcd_ctrl omap2_disp_ctrl; #endif +extern void omapfb_reserve_sdram(void); extern void omapfb_register_panel(struct lcd_panel *panel); extern void omapfb_write_first_pixel(struct omapfb_device *fbdev, u16 pixval); extern void omapfb_notify_clients(struct omapfb_device *fbdev, diff --git a/arch/arm/plat-omap/include/mach/sdrc.h b/arch/arm/plat-omap/include/mach/sdrc.h index d908eb527c8..25ee3819faa 100644 --- a/arch/arm/plat-omap/include/mach/sdrc.h +++ b/arch/arm/plat-omap/include/mach/sdrc.h @@ -25,6 +25,8 @@ #define SDRC_DLLB_STATUS 0x06C #define SDRC_POWER 0x070 #define SDRC_MR_0 0x084 +#define SDRC_ACTIM_CTRL_A 0x09c +#define SDRC_ACTIM_CTRL_B 0x0a0 #define SDRC_RFR_CTRL_0 0x0a4 /* -- cgit v1.2.3-70-g09d2 From 25cef2251415cef5438e20965fec87096fe2efb0 Mon Sep 17 00:00:00 2001 From: Uwe Kleine-König Date: Wed, 8 Oct 2008 10:01:39 +0300 Subject: Fix sections for omap-mcbsp platform driver MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Don't use __init but __devinit to define probe function. A pointer to omap_mcbsp_probe is passed to the core via platform_driver_register and so the function must not disappear when the init code is freed. Using __init and having HOTPLUG=y the following probably oopses: echo -n omap-mcbsp.1 > /sys/bus/platform/driver/omap-mcbsp/unbind echo -n omap-mcbsp.1 > /sys/bus/platform/driver/omap-mcbsp/bind While at it move the remove function to the .devexit.text section. Signed-off-by: Uwe Kleine-König Cc: Russell King Signed-off-by: Tony Lindgren --- arch/arm/plat-omap/mcbsp.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/arm/plat-omap/mcbsp.c b/arch/arm/plat-omap/mcbsp.c index e63990fd923..e0803a8344b 100644 --- a/arch/arm/plat-omap/mcbsp.c +++ b/arch/arm/plat-omap/mcbsp.c @@ -804,7 +804,7 @@ EXPORT_SYMBOL(omap_mcbsp_set_spi_mode); * McBSP1 and McBSP3 are directly mapped on 1610 and 1510. * 730 has only 2 McBSP, and both of them are MPU peripherals. */ -static int __init omap_mcbsp_probe(struct platform_device *pdev) +static int __devinit omap_mcbsp_probe(struct platform_device *pdev) { struct omap_mcbsp_platform_data *pdata = pdev->dev.platform_data; int id = pdev->id - 1; @@ -868,7 +868,7 @@ exit: return ret; } -static int omap_mcbsp_remove(struct platform_device *pdev) +static int __devexit omap_mcbsp_remove(struct platform_device *pdev) { struct omap_mcbsp *mcbsp = platform_get_drvdata(pdev); @@ -894,7 +894,7 @@ static int omap_mcbsp_remove(struct platform_device *pdev) static struct platform_driver omap_mcbsp_driver = { .probe = omap_mcbsp_probe, - .remove = omap_mcbsp_remove, + .remove = __devexit_p(omap_mcbsp_remove), .driver = { .name = "omap-mcbsp", }, -- cgit v1.2.3-70-g09d2 From b4b58f5834a023dab67201db9a626bef07bb200c Mon Sep 17 00:00:00 2001 From: Chandra Shekhar Date: Wed, 8 Oct 2008 10:01:39 +0300 Subject: ARM: OMAP: Allocate McBSP devices dynamically Based on Chandra's earlier patches in linux-omap tree. Note that omap1_mcbsp_check and omap2_mcbsp_check are no longer needed as there's now omap_mcbsp_check_valid_id() defined. Also some functions can now be marked __init. Signed-off-by: Chandra Shekhar Signed-off-by: Tony Lindgren --- arch/arm/mach-omap1/mcbsp.c | 37 +-- arch/arm/mach-omap2/mcbsp.c | 28 +-- arch/arm/plat-omap/include/mach/mcbsp.h | 33 ++- arch/arm/plat-omap/mcbsp.c | 388 ++++++++++++++++++-------------- 4 files changed, 270 insertions(+), 216 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap1/mcbsp.c b/arch/arm/mach-omap1/mcbsp.c index afb5789f94f..7de7c691558 100644 --- a/arch/arm/mach-omap1/mcbsp.c +++ b/arch/arm/mach-omap1/mcbsp.c @@ -103,30 +103,6 @@ static inline void omap_mcbsp_clk_init(struct mcbsp_internal_clk *mclk) { } #endif -static int omap1_mcbsp_check(unsigned int id) -{ - /* REVISIT: Check correctly for number of registered McBSPs */ - if (cpu_is_omap730()) { - if (id > OMAP_MAX_MCBSP_COUNT - 2) { - printk(KERN_ERR "OMAP-McBSP: McBSP%d doesn't exist\n", - id + 1); - return -ENODEV; - } - return 0; - } - - if (cpu_is_omap15xx() || cpu_is_omap16xx()) { - if (id > OMAP_MAX_MCBSP_COUNT - 1) { - printk(KERN_ERR "OMAP-McBSP: McBSP%d doesn't exist\n", - id + 1); - return -ENODEV; - } - return 0; - } - - return -ENODEV; -} - static void omap1_mcbsp_request(unsigned int id) { /* @@ -151,7 +127,6 @@ static void omap1_mcbsp_free(unsigned int id) } static struct omap_mcbsp_ops omap1_mcbsp_ops = { - .check = omap1_mcbsp_check, .request = omap1_mcbsp_request, .free = omap1_mcbsp_free, }; @@ -262,6 +237,18 @@ int __init omap1_mcbsp_init(void) } } + if (cpu_is_omap730()) + omap_mcbsp_count = OMAP730_MCBSP_PDATA_SZ; + if (cpu_is_omap15xx()) + omap_mcbsp_count = OMAP15XX_MCBSP_PDATA_SZ; + if (cpu_is_omap16xx()) + omap_mcbsp_count = OMAP16XX_MCBSP_PDATA_SZ; + + mcbsp_ptr = kzalloc(omap_mcbsp_count * sizeof(struct omap_mcbsp *), + GFP_KERNEL); + if (!mcbsp_ptr) + return -ENOMEM; + if (cpu_is_omap730()) omap_mcbsp_register_board_cfg(omap730_mcbsp_pdata, OMAP730_MCBSP_PDATA_SZ); diff --git a/arch/arm/mach-omap2/mcbsp.c b/arch/arm/mach-omap2/mcbsp.c index 709db03b999..73f2279ef2e 100644 --- a/arch/arm/mach-omap2/mcbsp.c +++ b/arch/arm/mach-omap2/mcbsp.c @@ -28,7 +28,7 @@ struct mcbsp_internal_clk { int n_childs; }; -#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) +#if defined(CONFIG_ARCH_OMAP24XX) static void omap_mcbsp_clk_init(struct mcbsp_internal_clk *mclk) { const char *clk_names[] = { "mcbsp_ick", "mcbsp_fck" }; @@ -117,18 +117,8 @@ static void omap2_mcbsp_request(unsigned int id) omap2_mcbsp2_mux_setup(); } -static int omap2_mcbsp_check(unsigned int id) -{ - if (id > OMAP_MAX_MCBSP_COUNT - 1) { - printk(KERN_ERR "OMAP-McBSP: McBSP%d doesn't exist\n", id + 1); - return -ENODEV; - } - return 0; -} - static struct omap_mcbsp_ops omap2_mcbsp_ops = { .request = omap2_mcbsp_request, - .check = omap2_mcbsp_check, }; #ifdef CONFIG_ARCH_OMAP24XX @@ -185,7 +175,7 @@ static struct omap_mcbsp_platform_data omap34xx_mcbsp_pdata[] = { #define OMAP34XX_MCBSP_PDATA_SZ 0 #endif -int __init omap2_mcbsp_init(void) +static int __init omap2_mcbsp_init(void) { int i; @@ -195,14 +185,20 @@ int __init omap2_mcbsp_init(void) clk_register(&omap_mcbsp_clks[i].clk); } + if (cpu_is_omap24xx()) + omap_mcbsp_count = OMAP24XX_MCBSP_PDATA_SZ; + if (cpu_is_omap34xx()) + omap_mcbsp_count = OMAP34XX_MCBSP_PDATA_SZ; + + mcbsp_ptr = kzalloc(omap_mcbsp_count * sizeof(struct omap_mcbsp *), + GFP_KERNEL); + if (!mcbsp_ptr) + return -ENOMEM; + if (cpu_is_omap24xx()) omap_mcbsp_register_board_cfg(omap24xx_mcbsp_pdata, OMAP24XX_MCBSP_PDATA_SZ); - if (cpu_is_omap34xx()) - omap_mcbsp_register_board_cfg(omap34xx_mcbsp_pdata, - OMAP34XX_MCBSP_PDATA_SZ); - return omap_mcbsp_init(); } arch_initcall(omap2_mcbsp_init); diff --git a/arch/arm/plat-omap/include/mach/mcbsp.h b/arch/arm/plat-omap/include/mach/mcbsp.h index a3074f2fb7c..46898faecb1 100644 --- a/arch/arm/plat-omap/include/mach/mcbsp.h +++ b/arch/arm/plat-omap/include/mach/mcbsp.h @@ -81,9 +81,6 @@ #define OMAP_MCBSP_REG_XCERG 0x3A #define OMAP_MCBSP_REG_XCERH 0x3C -#define OMAP_MAX_MCBSP_COUNT 3 -#define MAX_MCBSP_CLOCKS 3 - #define AUDIO_MCBSP_DATAWRITE (OMAP1510_MCBSP1_BASE + OMAP_MCBSP_REG_DXR1) #define AUDIO_MCBSP_DATAREAD (OMAP1510_MCBSP1_BASE + OMAP_MCBSP_REG_DRR1) @@ -91,12 +88,14 @@ #define AUDIO_DMA_TX OMAP_DMA_MCBSP1_TX #define AUDIO_DMA_RX OMAP_DMA_MCBSP1_RX -#elif defined(CONFIG_ARCH_OMAP24XX) +#elif defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) #define OMAP_MCBSP_REG_DRR2 0x00 #define OMAP_MCBSP_REG_DRR1 0x04 #define OMAP_MCBSP_REG_DXR2 0x08 #define OMAP_MCBSP_REG_DXR1 0x0C +#define OMAP_MCBSP_REG_DRR 0x00 +#define OMAP_MCBSP_REG_DXR 0x08 #define OMAP_MCBSP_REG_SPCR2 0x10 #define OMAP_MCBSP_REG_SPCR1 0x14 #define OMAP_MCBSP_REG_RCR2 0x18 @@ -124,9 +123,9 @@ #define OMAP_MCBSP_REG_RCERH 0x70 #define OMAP_MCBSP_REG_XCERG 0x74 #define OMAP_MCBSP_REG_XCERH 0x78 - -#define OMAP_MAX_MCBSP_COUNT 2 -#define MAX_MCBSP_CLOCKS 2 +#define OMAP_MCBSP_REG_SYSCON 0x8C +#define OMAP_MCBSP_REG_XCCR 0xAC +#define OMAP_MCBSP_REG_RCCR 0xB0 #define AUDIO_MCBSP_DATAWRITE (OMAP24XX_MCBSP2_BASE + OMAP_MCBSP_REG_DXR1) #define AUDIO_MCBSP_DATAREAD (OMAP24XX_MCBSP2_BASE + OMAP_MCBSP_REG_DRR1) @@ -137,10 +136,6 @@ #endif -#define OMAP_MCBSP_READ(base, reg) __raw_readw((base) + OMAP_MCBSP_REG_##reg) -#define OMAP_MCBSP_WRITE(base, reg, val) __raw_writew((val), (base) + OMAP_MCBSP_REG_##reg) - - /************************** McBSP SPCR1 bit definitions ***********************/ #define RRST 0x0001 #define RRDY 0x0002 @@ -151,6 +146,7 @@ #define DXENA 0x0080 #define CLKSTP(value) ((value)<<11) /* bits 11:12 */ #define RJUST(value) ((value)<<13) /* bits 13:14 */ +#define ALB 0x8000 #define DLB 0x8000 /************************** McBSP SPCR2 bit definitions ***********************/ @@ -228,6 +224,17 @@ #define XPABLK(value) ((value)<<5) /* Bits 5:6 */ #define XPBBLK(value) ((value)<<7) /* Bits 7:8 */ +/*********************** McBSP XCCR bit definitions *************************/ +#define DILB 0x0020 +#define XDMAEN 0x0008 +#define XDISABLE 0x0001 + +/********************** McBSP RCCR bit definitions *************************/ +#define RDMAEN 0x0008 +#define RDISABLE 0x0001 + +/********************** McBSP SYSCONFIG bit definitions ********************/ +#define SOFTRST 0x0002 /* we don't do multichannel for now */ struct omap_mcbsp_reg_cfg { @@ -311,7 +318,6 @@ struct omap_mcbsp_spi_cfg { struct omap_mcbsp_ops { void (*request)(unsigned int); void (*free)(unsigned int); - int (*check)(unsigned int); }; struct omap_mcbsp_platform_data { @@ -353,6 +359,8 @@ struct omap_mcbsp { struct omap_mcbsp_platform_data *pdata; struct clk *clk; }; +extern struct omap_mcbsp **mcbsp_ptr; +extern int omap_mcbsp_count; int omap_mcbsp_init(void); void omap_mcbsp_register_board_cfg(struct omap_mcbsp_platform_data *config, @@ -377,5 +385,6 @@ void omap_mcbsp_set_spi_mode(unsigned int id, const struct omap_mcbsp_spi_cfg * /* Polled read/write functions */ int omap_mcbsp_pollread(unsigned int id, u16 * buf); int omap_mcbsp_pollwrite(unsigned int id, u16 buf); +int omap_mcbsp_set_io_type(unsigned int id, omap_mcbsp_io_type_t io_type); #endif diff --git a/arch/arm/plat-omap/mcbsp.c b/arch/arm/plat-omap/mcbsp.c index e0803a8344b..f27e641bf81 100644 --- a/arch/arm/plat-omap/mcbsp.c +++ b/arch/arm/plat-omap/mcbsp.c @@ -27,43 +27,65 @@ #include #include -static struct omap_mcbsp mcbsp[OMAP_MAX_MCBSP_COUNT]; +struct omap_mcbsp **mcbsp_ptr; +int omap_mcbsp_count; -#define omap_mcbsp_check_valid_id(id) (mcbsp[id].pdata && \ - mcbsp[id].pdata->ops && \ - mcbsp[id].pdata->ops->check && \ - (mcbsp[id].pdata->ops->check(id) == 0)) +void omap_mcbsp_write(void __iomem *io_base, u16 reg, u32 val) +{ + if (cpu_class_is_omap1() || cpu_is_omap2420()) + __raw_writew((u16)val, io_base + reg); + else + __raw_writel(val, io_base + reg); +} + +int omap_mcbsp_read(void __iomem *io_base, u16 reg) +{ + if (cpu_class_is_omap1() || cpu_is_omap2420()) + return __raw_readw(io_base + reg); + else + return __raw_readl(io_base + reg); +} + +#define OMAP_MCBSP_READ(base, reg) \ + omap_mcbsp_read(base, OMAP_MCBSP_REG_##reg) +#define OMAP_MCBSP_WRITE(base, reg, val) \ + omap_mcbsp_write(base, OMAP_MCBSP_REG_##reg, val) + +#define omap_mcbsp_check_valid_id(id) (id < omap_mcbsp_count) +#define id_to_mcbsp_ptr(id) mcbsp_ptr[id]; static void omap_mcbsp_dump_reg(u8 id) { - dev_dbg(mcbsp[id].dev, "**** McBSP%d regs ****\n", mcbsp[id].id); - dev_dbg(mcbsp[id].dev, "DRR2: 0x%04x\n", - OMAP_MCBSP_READ(mcbsp[id].io_base, DRR2)); - dev_dbg(mcbsp[id].dev, "DRR1: 0x%04x\n", - OMAP_MCBSP_READ(mcbsp[id].io_base, DRR1)); - dev_dbg(mcbsp[id].dev, "DXR2: 0x%04x\n", - OMAP_MCBSP_READ(mcbsp[id].io_base, DXR2)); - dev_dbg(mcbsp[id].dev, "DXR1: 0x%04x\n", - OMAP_MCBSP_READ(mcbsp[id].io_base, DXR1)); - dev_dbg(mcbsp[id].dev, "SPCR2: 0x%04x\n", - OMAP_MCBSP_READ(mcbsp[id].io_base, SPCR2)); - dev_dbg(mcbsp[id].dev, "SPCR1: 0x%04x\n", - OMAP_MCBSP_READ(mcbsp[id].io_base, SPCR1)); - dev_dbg(mcbsp[id].dev, "RCR2: 0x%04x\n", - OMAP_MCBSP_READ(mcbsp[id].io_base, RCR2)); - dev_dbg(mcbsp[id].dev, "RCR1: 0x%04x\n", - OMAP_MCBSP_READ(mcbsp[id].io_base, RCR1)); - dev_dbg(mcbsp[id].dev, "XCR2: 0x%04x\n", - OMAP_MCBSP_READ(mcbsp[id].io_base, XCR2)); - dev_dbg(mcbsp[id].dev, "XCR1: 0x%04x\n", - OMAP_MCBSP_READ(mcbsp[id].io_base, XCR1)); - dev_dbg(mcbsp[id].dev, "SRGR2: 0x%04x\n", - OMAP_MCBSP_READ(mcbsp[id].io_base, SRGR2)); - dev_dbg(mcbsp[id].dev, "SRGR1: 0x%04x\n", - OMAP_MCBSP_READ(mcbsp[id].io_base, SRGR1)); - dev_dbg(mcbsp[id].dev, "PCR0: 0x%04x\n", - OMAP_MCBSP_READ(mcbsp[id].io_base, PCR0)); - dev_dbg(mcbsp[id].dev, "***********************\n"); + struct omap_mcbsp *mcbsp = id_to_mcbsp_ptr(id); + + dev_dbg(mcbsp->dev, "**** McBSP%d regs ****\n", mcbsp->id); + dev_dbg(mcbsp->dev, "DRR2: 0x%04x\n", + OMAP_MCBSP_READ(mcbsp->io_base, DRR2)); + dev_dbg(mcbsp->dev, "DRR1: 0x%04x\n", + OMAP_MCBSP_READ(mcbsp->io_base, DRR1)); + dev_dbg(mcbsp->dev, "DXR2: 0x%04x\n", + OMAP_MCBSP_READ(mcbsp->io_base, DXR2)); + dev_dbg(mcbsp->dev, "DXR1: 0x%04x\n", + OMAP_MCBSP_READ(mcbsp->io_base, DXR1)); + dev_dbg(mcbsp->dev, "SPCR2: 0x%04x\n", + OMAP_MCBSP_READ(mcbsp->io_base, SPCR2)); + dev_dbg(mcbsp->dev, "SPCR1: 0x%04x\n", + OMAP_MCBSP_READ(mcbsp->io_base, SPCR1)); + dev_dbg(mcbsp->dev, "RCR2: 0x%04x\n", + OMAP_MCBSP_READ(mcbsp->io_base, RCR2)); + dev_dbg(mcbsp->dev, "RCR1: 0x%04x\n", + OMAP_MCBSP_READ(mcbsp->io_base, RCR1)); + dev_dbg(mcbsp->dev, "XCR2: 0x%04x\n", + OMAP_MCBSP_READ(mcbsp->io_base, XCR2)); + dev_dbg(mcbsp->dev, "XCR1: 0x%04x\n", + OMAP_MCBSP_READ(mcbsp->io_base, XCR1)); + dev_dbg(mcbsp->dev, "SRGR2: 0x%04x\n", + OMAP_MCBSP_READ(mcbsp->io_base, SRGR2)); + dev_dbg(mcbsp->dev, "SRGR1: 0x%04x\n", + OMAP_MCBSP_READ(mcbsp->io_base, SRGR1)); + dev_dbg(mcbsp->dev, "PCR0: 0x%04x\n", + OMAP_MCBSP_READ(mcbsp->io_base, PCR0)); + dev_dbg(mcbsp->dev, "***********************\n"); } static irqreturn_t omap_mcbsp_tx_irq_handler(int irq, void *dev_id) @@ -126,16 +148,18 @@ static void omap_mcbsp_rx_dma_callback(int lch, u16 ch_status, void *data) */ void omap_mcbsp_config(unsigned int id, const struct omap_mcbsp_reg_cfg *config) { + struct omap_mcbsp *mcbsp; void __iomem *io_base; if (!omap_mcbsp_check_valid_id(id)) { printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1); return; } + mcbsp = id_to_mcbsp_ptr(id); - io_base = mcbsp[id].io_base; - dev_dbg(mcbsp[id].dev, "Configuring McBSP%d phys_base: 0x%08lx\n", - mcbsp[id].id, mcbsp[id].phys_base); + io_base = mcbsp->io_base; + dev_dbg(mcbsp->dev, "Configuring McBSP%d phys_base: 0x%08lx\n", + mcbsp->id, mcbsp->phys_base); /* We write the given config */ OMAP_MCBSP_WRITE(io_base, SPCR2, config->spcr2); @@ -158,23 +182,26 @@ EXPORT_SYMBOL(omap_mcbsp_config); */ int omap_mcbsp_set_io_type(unsigned int id, omap_mcbsp_io_type_t io_type) { + struct omap_mcbsp *mcbsp; + if (!omap_mcbsp_check_valid_id(id)) { printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1); return -ENODEV; } + mcbsp = id_to_mcbsp_ptr(id); - spin_lock(&mcbsp[id].lock); + spin_lock(&mcbsp->lock); - if (!mcbsp[id].free) { - dev_err(mcbsp[id].dev, "McBSP%d is currently in use\n", - mcbsp[id].id); - spin_unlock(&mcbsp[id].lock); + if (!mcbsp->free) { + dev_err(mcbsp->dev, "McBSP%d is currently in use\n", + mcbsp->id); + spin_unlock(&mcbsp->lock); return -EINVAL; } - mcbsp[id].io_type = io_type; + mcbsp->io_type = io_type; - spin_unlock(&mcbsp[id].lock); + spin_unlock(&mcbsp->lock); return 0; } @@ -182,53 +209,55 @@ EXPORT_SYMBOL(omap_mcbsp_set_io_type); int omap_mcbsp_request(unsigned int id) { + struct omap_mcbsp *mcbsp; int err; if (!omap_mcbsp_check_valid_id(id)) { printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1); return -ENODEV; } + mcbsp = id_to_mcbsp_ptr(id); - if (mcbsp[id].pdata->ops->request) - mcbsp[id].pdata->ops->request(id); + if (mcbsp->pdata && mcbsp->pdata->ops && mcbsp->pdata->ops->request) + mcbsp->pdata->ops->request(id); - clk_enable(mcbsp[id].clk); + clk_enable(mcbsp->clk); - spin_lock(&mcbsp[id].lock); - if (!mcbsp[id].free) { - dev_err(mcbsp[id].dev, "McBSP%d is currently in use\n", - mcbsp[id].id); - spin_unlock(&mcbsp[id].lock); + spin_lock(&mcbsp->lock); + if (!mcbsp->free) { + dev_err(mcbsp->dev, "McBSP%d is currently in use\n", + mcbsp->id); + spin_unlock(&mcbsp->lock); return -1; } - mcbsp[id].free = 0; - spin_unlock(&mcbsp[id].lock); + mcbsp->free = 0; + spin_unlock(&mcbsp->lock); - if (mcbsp[id].io_type == OMAP_MCBSP_IRQ_IO) { + if (mcbsp->io_type == OMAP_MCBSP_IRQ_IO) { /* We need to get IRQs here */ - err = request_irq(mcbsp[id].tx_irq, omap_mcbsp_tx_irq_handler, - 0, "McBSP", (void *) (&mcbsp[id])); + err = request_irq(mcbsp->tx_irq, omap_mcbsp_tx_irq_handler, + 0, "McBSP", (void *)mcbsp); if (err != 0) { - dev_err(mcbsp[id].dev, "Unable to request TX IRQ %d " - "for McBSP%d\n", mcbsp[id].tx_irq, - mcbsp[id].id); + dev_err(mcbsp->dev, "Unable to request TX IRQ %d " + "for McBSP%d\n", mcbsp->tx_irq, + mcbsp->id); return err; } - init_completion(&(mcbsp[id].tx_irq_completion)); + init_completion(&mcbsp->tx_irq_completion); - err = request_irq(mcbsp[id].rx_irq, omap_mcbsp_rx_irq_handler, - 0, "McBSP", (void *) (&mcbsp[id])); + err = request_irq(mcbsp->rx_irq, omap_mcbsp_rx_irq_handler, + 0, "McBSP", (void *)mcbsp); if (err != 0) { - dev_err(mcbsp[id].dev, "Unable to request RX IRQ %d " - "for McBSP%d\n", mcbsp[id].rx_irq, - mcbsp[id].id); - free_irq(mcbsp[id].tx_irq, (void *) (&mcbsp[id])); + dev_err(mcbsp->dev, "Unable to request RX IRQ %d " + "for McBSP%d\n", mcbsp->rx_irq, + mcbsp->id); + free_irq(mcbsp->tx_irq, (void *)mcbsp); return err; } - init_completion(&(mcbsp[id].rx_irq_completion)); + init_completion(&mcbsp->rx_irq_completion); } return 0; @@ -237,31 +266,34 @@ EXPORT_SYMBOL(omap_mcbsp_request); void omap_mcbsp_free(unsigned int id) { + struct omap_mcbsp *mcbsp; + if (!omap_mcbsp_check_valid_id(id)) { printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1); return; } + mcbsp = id_to_mcbsp_ptr(id); - if (mcbsp[id].pdata->ops->free) - mcbsp[id].pdata->ops->free(id); + if (mcbsp->pdata && mcbsp->pdata->ops && mcbsp->pdata->ops->free) + mcbsp->pdata->ops->free(id); - clk_disable(mcbsp[id].clk); + clk_disable(mcbsp->clk); - spin_lock(&mcbsp[id].lock); - if (mcbsp[id].free) { - dev_err(mcbsp[id].dev, "McBSP%d was not reserved\n", - mcbsp[id].id); - spin_unlock(&mcbsp[id].lock); + spin_lock(&mcbsp->lock); + if (mcbsp->free) { + dev_err(mcbsp->dev, "McBSP%d was not reserved\n", + mcbsp->id); + spin_unlock(&mcbsp->lock); return; } - mcbsp[id].free = 1; - spin_unlock(&mcbsp[id].lock); + mcbsp->free = 1; + spin_unlock(&mcbsp->lock); - if (mcbsp[id].io_type == OMAP_MCBSP_IRQ_IO) { + if (mcbsp->io_type == OMAP_MCBSP_IRQ_IO) { /* Free IRQs */ - free_irq(mcbsp[id].rx_irq, (void *) (&mcbsp[id])); - free_irq(mcbsp[id].tx_irq, (void *) (&mcbsp[id])); + free_irq(mcbsp->rx_irq, (void *)mcbsp); + free_irq(mcbsp->tx_irq, (void *)mcbsp); } } EXPORT_SYMBOL(omap_mcbsp_free); @@ -273,6 +305,7 @@ EXPORT_SYMBOL(omap_mcbsp_free); */ void omap_mcbsp_start(unsigned int id) { + struct omap_mcbsp *mcbsp; void __iomem *io_base; u16 w; @@ -280,11 +313,11 @@ void omap_mcbsp_start(unsigned int id) printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1); return; } + mcbsp = id_to_mcbsp_ptr(id); + io_base = mcbsp->io_base; - io_base = mcbsp[id].io_base; - - mcbsp[id].rx_word_length = (OMAP_MCBSP_READ(io_base, RCR1) >> 5) & 0x7; - mcbsp[id].tx_word_length = (OMAP_MCBSP_READ(io_base, XCR1) >> 5) & 0x7; + mcbsp->rx_word_length = (OMAP_MCBSP_READ(io_base, RCR1) >> 5) & 0x7; + mcbsp->tx_word_length = (OMAP_MCBSP_READ(io_base, XCR1) >> 5) & 0x7; /* Start the sample generator */ w = OMAP_MCBSP_READ(io_base, SPCR2); @@ -310,6 +343,7 @@ EXPORT_SYMBOL(omap_mcbsp_start); void omap_mcbsp_stop(unsigned int id) { + struct omap_mcbsp *mcbsp; void __iomem *io_base; u16 w; @@ -318,7 +352,8 @@ void omap_mcbsp_stop(unsigned int id) return; } - io_base = mcbsp[id].io_base; + mcbsp = id_to_mcbsp_ptr(id); + io_base = mcbsp->io_base; /* Reset transmitter */ w = OMAP_MCBSP_READ(io_base, SPCR2); @@ -337,6 +372,7 @@ EXPORT_SYMBOL(omap_mcbsp_stop); /* polled mcbsp i/o operations */ int omap_mcbsp_pollwrite(unsigned int id, u16 buf) { + struct omap_mcbsp *mcbsp; void __iomem *base; if (!omap_mcbsp_check_valid_id(id)) { @@ -344,7 +380,9 @@ int omap_mcbsp_pollwrite(unsigned int id, u16 buf) return -ENODEV; } - base = mcbsp[id].io_base; + mcbsp = id_to_mcbsp_ptr(id); + base = mcbsp->io_base; + writew(buf, base + OMAP_MCBSP_REG_DXR1); /* if frame sync error - clear the error */ if (readw(base + OMAP_MCBSP_REG_SPCR2) & XSYNC_ERR) { @@ -366,8 +404,8 @@ int omap_mcbsp_pollwrite(unsigned int id, u16 buf) (XRST), base + OMAP_MCBSP_REG_SPCR2); udelay(10); - dev_err(mcbsp[id].dev, "Could not write to" - " McBSP%d Register\n", mcbsp[id].id); + dev_err(mcbsp->dev, "Could not write to" + " McBSP%d Register\n", mcbsp->id); return -2; } } @@ -379,14 +417,16 @@ EXPORT_SYMBOL(omap_mcbsp_pollwrite); int omap_mcbsp_pollread(unsigned int id, u16 *buf) { + struct omap_mcbsp *mcbsp; void __iomem *base; if (!omap_mcbsp_check_valid_id(id)) { printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1); return -ENODEV; } + mcbsp = id_to_mcbsp_ptr(id); - base = mcbsp[id].io_base; + base = mcbsp->io_base; /* if frame sync error - clear the error */ if (readw(base + OMAP_MCBSP_REG_SPCR1) & RSYNC_ERR) { /* clear error */ @@ -407,8 +447,8 @@ int omap_mcbsp_pollread(unsigned int id, u16 *buf) (RRST), base + OMAP_MCBSP_REG_SPCR1); udelay(10); - dev_err(mcbsp[id].dev, "Could not read from" - " McBSP%d Register\n", mcbsp[id].id); + dev_err(mcbsp->dev, "Could not read from" + " McBSP%d Register\n", mcbsp->id); return -2; } } @@ -424,6 +464,7 @@ EXPORT_SYMBOL(omap_mcbsp_pollread); */ void omap_mcbsp_xmit_word(unsigned int id, u32 word) { + struct omap_mcbsp *mcbsp; void __iomem *io_base; omap_mcbsp_word_length word_length; @@ -432,10 +473,11 @@ void omap_mcbsp_xmit_word(unsigned int id, u32 word) return; } - io_base = mcbsp[id].io_base; - word_length = mcbsp[id].tx_word_length; + mcbsp = id_to_mcbsp_ptr(id); + io_base = mcbsp->io_base; + word_length = mcbsp->tx_word_length; - wait_for_completion(&(mcbsp[id].tx_irq_completion)); + wait_for_completion(&mcbsp->tx_irq_completion); if (word_length > OMAP_MCBSP_WORD_16) OMAP_MCBSP_WRITE(io_base, DXR2, word >> 16); @@ -445,6 +487,7 @@ EXPORT_SYMBOL(omap_mcbsp_xmit_word); u32 omap_mcbsp_recv_word(unsigned int id) { + struct omap_mcbsp *mcbsp; void __iomem *io_base; u16 word_lsb, word_msb = 0; omap_mcbsp_word_length word_length; @@ -453,11 +496,12 @@ u32 omap_mcbsp_recv_word(unsigned int id) printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1); return -ENODEV; } + mcbsp = id_to_mcbsp_ptr(id); - word_length = mcbsp[id].rx_word_length; - io_base = mcbsp[id].io_base; + word_length = mcbsp->rx_word_length; + io_base = mcbsp->io_base; - wait_for_completion(&(mcbsp[id].rx_irq_completion)); + wait_for_completion(&mcbsp->rx_irq_completion); if (word_length > OMAP_MCBSP_WORD_16) word_msb = OMAP_MCBSP_READ(io_base, DRR2); @@ -469,6 +513,7 @@ EXPORT_SYMBOL(omap_mcbsp_recv_word); int omap_mcbsp_spi_master_xmit_word_poll(unsigned int id, u32 word) { + struct omap_mcbsp *mcbsp; void __iomem *io_base; omap_mcbsp_word_length tx_word_length; omap_mcbsp_word_length rx_word_length; @@ -478,10 +523,10 @@ int omap_mcbsp_spi_master_xmit_word_poll(unsigned int id, u32 word) printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1); return -ENODEV; } - - io_base = mcbsp[id].io_base; - tx_word_length = mcbsp[id].tx_word_length; - rx_word_length = mcbsp[id].rx_word_length; + mcbsp = id_to_mcbsp_ptr(id); + io_base = mcbsp->io_base; + tx_word_length = mcbsp->tx_word_length; + rx_word_length = mcbsp->rx_word_length; if (tx_word_length != rx_word_length) return -EINVAL; @@ -496,8 +541,8 @@ int omap_mcbsp_spi_master_xmit_word_poll(unsigned int id, u32 word) udelay(10); OMAP_MCBSP_WRITE(io_base, SPCR2, spcr2 | XRST); udelay(10); - dev_err(mcbsp[id].dev, "McBSP%d transmitter not " - "ready\n", mcbsp[id].id); + dev_err(mcbsp->dev, "McBSP%d transmitter not " + "ready\n", mcbsp->id); return -EAGAIN; } } @@ -517,8 +562,8 @@ int omap_mcbsp_spi_master_xmit_word_poll(unsigned int id, u32 word) udelay(10); OMAP_MCBSP_WRITE(io_base, SPCR1, spcr1 | RRST); udelay(10); - dev_err(mcbsp[id].dev, "McBSP%d receiver not " - "ready\n", mcbsp[id].id); + dev_err(mcbsp->dev, "McBSP%d receiver not " + "ready\n", mcbsp->id); return -EAGAIN; } } @@ -534,6 +579,7 @@ EXPORT_SYMBOL(omap_mcbsp_spi_master_xmit_word_poll); int omap_mcbsp_spi_master_recv_word_poll(unsigned int id, u32 *word) { + struct omap_mcbsp *mcbsp; u32 clock_word = 0; void __iomem *io_base; omap_mcbsp_word_length tx_word_length; @@ -545,9 +591,11 @@ int omap_mcbsp_spi_master_recv_word_poll(unsigned int id, u32 *word) return -ENODEV; } - io_base = mcbsp[id].io_base; - tx_word_length = mcbsp[id].tx_word_length; - rx_word_length = mcbsp[id].rx_word_length; + mcbsp = id_to_mcbsp_ptr(id); + io_base = mcbsp->io_base; + + tx_word_length = mcbsp->tx_word_length; + rx_word_length = mcbsp->rx_word_length; if (tx_word_length != rx_word_length) return -EINVAL; @@ -562,8 +610,8 @@ int omap_mcbsp_spi_master_recv_word_poll(unsigned int id, u32 *word) udelay(10); OMAP_MCBSP_WRITE(io_base, SPCR2, spcr2 | XRST); udelay(10); - dev_err(mcbsp[id].dev, "McBSP%d transmitter not " - "ready\n", mcbsp[id].id); + dev_err(mcbsp->dev, "McBSP%d transmitter not " + "ready\n", mcbsp->id); return -EAGAIN; } } @@ -583,8 +631,8 @@ int omap_mcbsp_spi_master_recv_word_poll(unsigned int id, u32 *word) udelay(10); OMAP_MCBSP_WRITE(io_base, SPCR1, spcr1 | RRST); udelay(10); - dev_err(mcbsp[id].dev, "McBSP%d receiver not " - "ready\n", mcbsp[id].id); + dev_err(mcbsp->dev, "McBSP%d receiver not " + "ready\n", mcbsp->id); return -EAGAIN; } } @@ -610,6 +658,7 @@ EXPORT_SYMBOL(omap_mcbsp_spi_master_recv_word_poll); int omap_mcbsp_xmit_buffer(unsigned int id, dma_addr_t buffer, unsigned int length) { + struct omap_mcbsp *mcbsp; int dma_tx_ch; int src_port = 0; int dest_port = 0; @@ -619,50 +668,51 @@ int omap_mcbsp_xmit_buffer(unsigned int id, dma_addr_t buffer, printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1); return -ENODEV; } + mcbsp = id_to_mcbsp_ptr(id); - if (omap_request_dma(mcbsp[id].dma_tx_sync, "McBSP TX", + if (omap_request_dma(mcbsp->dma_tx_sync, "McBSP TX", omap_mcbsp_tx_dma_callback, - &mcbsp[id], + mcbsp, &dma_tx_ch)) { - dev_err(mcbsp[id].dev, " Unable to request DMA channel for " + dev_err(mcbsp->dev, " Unable to request DMA channel for " "McBSP%d TX. Trying IRQ based TX\n", - mcbsp[id].id); + mcbsp->id); return -EAGAIN; } - mcbsp[id].dma_tx_lch = dma_tx_ch; + mcbsp->dma_tx_lch = dma_tx_ch; - dev_err(mcbsp[id].dev, "McBSP%d TX DMA on channel %d\n", mcbsp[id].id, + dev_err(mcbsp->dev, "McBSP%d TX DMA on channel %d\n", mcbsp->id, dma_tx_ch); - init_completion(&(mcbsp[id].tx_dma_completion)); + init_completion(&mcbsp->tx_dma_completion); if (cpu_class_is_omap1()) { src_port = OMAP_DMA_PORT_TIPB; dest_port = OMAP_DMA_PORT_EMIFF; } if (cpu_class_is_omap2()) - sync_dev = mcbsp[id].dma_tx_sync; + sync_dev = mcbsp->dma_tx_sync; - omap_set_dma_transfer_params(mcbsp[id].dma_tx_lch, + omap_set_dma_transfer_params(mcbsp->dma_tx_lch, OMAP_DMA_DATA_TYPE_S16, length >> 1, 1, OMAP_DMA_SYNC_ELEMENT, sync_dev, 0); - omap_set_dma_dest_params(mcbsp[id].dma_tx_lch, + omap_set_dma_dest_params(mcbsp->dma_tx_lch, src_port, OMAP_DMA_AMODE_CONSTANT, - mcbsp[id].phys_base + OMAP_MCBSP_REG_DXR1, + mcbsp->phys_base + OMAP_MCBSP_REG_DXR1, 0, 0); - omap_set_dma_src_params(mcbsp[id].dma_tx_lch, + omap_set_dma_src_params(mcbsp->dma_tx_lch, dest_port, OMAP_DMA_AMODE_POST_INC, buffer, 0, 0); - omap_start_dma(mcbsp[id].dma_tx_lch); - wait_for_completion(&(mcbsp[id].tx_dma_completion)); + omap_start_dma(mcbsp->dma_tx_lch); + wait_for_completion(&mcbsp->tx_dma_completion); return 0; } @@ -671,6 +721,7 @@ EXPORT_SYMBOL(omap_mcbsp_xmit_buffer); int omap_mcbsp_recv_buffer(unsigned int id, dma_addr_t buffer, unsigned int length) { + struct omap_mcbsp *mcbsp; int dma_rx_ch; int src_port = 0; int dest_port = 0; @@ -680,50 +731,51 @@ int omap_mcbsp_recv_buffer(unsigned int id, dma_addr_t buffer, printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1); return -ENODEV; } + mcbsp = id_to_mcbsp_ptr(id); - if (omap_request_dma(mcbsp[id].dma_rx_sync, "McBSP RX", + if (omap_request_dma(mcbsp->dma_rx_sync, "McBSP RX", omap_mcbsp_rx_dma_callback, - &mcbsp[id], + mcbsp, &dma_rx_ch)) { - dev_err(mcbsp[id].dev, "Unable to request DMA channel for " + dev_err(mcbsp->dev, "Unable to request DMA channel for " "McBSP%d RX. Trying IRQ based RX\n", - mcbsp[id].id); + mcbsp->id); return -EAGAIN; } - mcbsp[id].dma_rx_lch = dma_rx_ch; + mcbsp->dma_rx_lch = dma_rx_ch; - dev_err(mcbsp[id].dev, "McBSP%d RX DMA on channel %d\n", mcbsp[id].id, + dev_err(mcbsp->dev, "McBSP%d RX DMA on channel %d\n", mcbsp->id, dma_rx_ch); - init_completion(&(mcbsp[id].rx_dma_completion)); + init_completion(&mcbsp->rx_dma_completion); if (cpu_class_is_omap1()) { src_port = OMAP_DMA_PORT_TIPB; dest_port = OMAP_DMA_PORT_EMIFF; } if (cpu_class_is_omap2()) - sync_dev = mcbsp[id].dma_rx_sync; + sync_dev = mcbsp->dma_rx_sync; - omap_set_dma_transfer_params(mcbsp[id].dma_rx_lch, + omap_set_dma_transfer_params(mcbsp->dma_rx_lch, OMAP_DMA_DATA_TYPE_S16, length >> 1, 1, OMAP_DMA_SYNC_ELEMENT, sync_dev, 0); - omap_set_dma_src_params(mcbsp[id].dma_rx_lch, + omap_set_dma_src_params(mcbsp->dma_rx_lch, src_port, OMAP_DMA_AMODE_CONSTANT, - mcbsp[id].phys_base + OMAP_MCBSP_REG_DRR1, + mcbsp->phys_base + OMAP_MCBSP_REG_DRR1, 0, 0); - omap_set_dma_dest_params(mcbsp[id].dma_rx_lch, + omap_set_dma_dest_params(mcbsp->dma_rx_lch, dest_port, OMAP_DMA_AMODE_POST_INC, buffer, 0, 0); - omap_start_dma(mcbsp[id].dma_rx_lch); - wait_for_completion(&(mcbsp[id].rx_dma_completion)); + omap_start_dma(mcbsp->dma_rx_lch); + wait_for_completion(&mcbsp->rx_dma_completion); return 0; } @@ -738,12 +790,14 @@ EXPORT_SYMBOL(omap_mcbsp_recv_buffer); void omap_mcbsp_set_spi_mode(unsigned int id, const struct omap_mcbsp_spi_cfg *spi_cfg) { + struct omap_mcbsp *mcbsp; struct omap_mcbsp_reg_cfg mcbsp_cfg; if (!omap_mcbsp_check_valid_id(id)) { printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1); return; } + mcbsp = id_to_mcbsp_ptr(id); memset(&mcbsp_cfg, 0, sizeof(struct omap_mcbsp_reg_cfg)); @@ -807,6 +861,7 @@ EXPORT_SYMBOL(omap_mcbsp_set_spi_mode); static int __devinit omap_mcbsp_probe(struct platform_device *pdev) { struct omap_mcbsp_platform_data *pdata = pdev->dev.platform_data; + struct omap_mcbsp *mcbsp; int id = pdev->id - 1; int ret = 0; @@ -819,51 +874,58 @@ static int __devinit omap_mcbsp_probe(struct platform_device *pdev) dev_dbg(&pdev->dev, "Initializing OMAP McBSP (%d).\n", pdev->id); - if (id >= OMAP_MAX_MCBSP_COUNT) { + if (id >= omap_mcbsp_count) { dev_err(&pdev->dev, "Invalid McBSP device id (%d)\n", id); ret = -EINVAL; goto exit; } - spin_lock_init(&mcbsp[id].lock); - mcbsp[id].id = id + 1; - mcbsp[id].free = 1; - mcbsp[id].dma_tx_lch = -1; - mcbsp[id].dma_rx_lch = -1; + mcbsp = kzalloc(sizeof(struct omap_mcbsp), GFP_KERNEL); + if (!mcbsp) { + ret = -ENOMEM; + goto exit; + } + mcbsp_ptr[id] = mcbsp; + + spin_lock_init(&mcbsp->lock); + mcbsp->id = id + 1; + mcbsp->free = 1; + mcbsp->dma_tx_lch = -1; + mcbsp->dma_rx_lch = -1; - mcbsp[id].phys_base = pdata->phys_base; - mcbsp[id].io_base = ioremap(pdata->phys_base, SZ_4K); - if (!mcbsp[id].io_base) { + mcbsp->phys_base = pdata->phys_base; + mcbsp->io_base = ioremap(pdata->phys_base, SZ_4K); + if (!mcbsp->io_base) { ret = -ENOMEM; goto err_ioremap; } /* Default I/O is IRQ based */ - mcbsp[id].io_type = OMAP_MCBSP_IRQ_IO; - mcbsp[id].tx_irq = pdata->tx_irq; - mcbsp[id].rx_irq = pdata->rx_irq; - mcbsp[id].dma_rx_sync = pdata->dma_rx_sync; - mcbsp[id].dma_tx_sync = pdata->dma_tx_sync; + mcbsp->io_type = OMAP_MCBSP_IRQ_IO; + mcbsp->tx_irq = pdata->tx_irq; + mcbsp->rx_irq = pdata->rx_irq; + mcbsp->dma_rx_sync = pdata->dma_rx_sync; + mcbsp->dma_tx_sync = pdata->dma_tx_sync; if (pdata->clk_name) - mcbsp[id].clk = clk_get(&pdev->dev, pdata->clk_name); - if (IS_ERR(mcbsp[id].clk)) { + mcbsp->clk = clk_get(&pdev->dev, pdata->clk_name); + if (IS_ERR(mcbsp->clk)) { dev_err(&pdev->dev, "Invalid clock configuration for McBSP%d.\n", - mcbsp[id].id); - ret = PTR_ERR(mcbsp[id].clk); + mcbsp->id); + ret = PTR_ERR(mcbsp->clk); goto err_clk; } - mcbsp[id].pdata = pdata; - mcbsp[id].dev = &pdev->dev; - platform_set_drvdata(pdev, &mcbsp[id]); + mcbsp->pdata = pdata; + mcbsp->dev = &pdev->dev; + platform_set_drvdata(pdev, mcbsp); return 0; err_clk: - iounmap(mcbsp[id].io_base); + iounmap(mcbsp->io_base); err_ioremap: - mcbsp[id].free = 0; + mcbsp->free = 0; exit: return ret; } -- cgit v1.2.3-70-g09d2 From 9c8e3a0fac67d24bbc60ccb3920b6a9150e798bc Mon Sep 17 00:00:00 2001 From: Chandra Shekhar Date: Wed, 8 Oct 2008 10:01:40 +0300 Subject: ARM: OMAP: Add support for McBSP devices 3 - 5 on 34xx Based on Chandra's earlier patches in linux-omap tree. Signed-off-by: Chandra Shekhar Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/mcbsp.c | 56 ++++++++++++++++++++++++++++++++- arch/arm/plat-omap/include/mach/mcbsp.h | 5 +++ 2 files changed, 60 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/mcbsp.c b/arch/arm/mach-omap2/mcbsp.c index 73f2279ef2e..b4fe0f3714c 100644 --- a/arch/arm/mach-omap2/mcbsp.c +++ b/arch/arm/mach-omap2/mcbsp.c @@ -28,7 +28,7 @@ struct mcbsp_internal_clk { int n_childs; }; -#if defined(CONFIG_ARCH_OMAP24XX) +#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) static void omap_mcbsp_clk_init(struct mcbsp_internal_clk *mclk) { const char *clk_names[] = { "mcbsp_ick", "mcbsp_fck" }; @@ -89,6 +89,30 @@ static struct mcbsp_internal_clk omap_mcbsp_clks[] = { .disable = omap_mcbsp_clk_disable, }, }, + { + .clk = { + .name = "mcbsp_clk", + .id = 3, + .enable = omap_mcbsp_clk_enable, + .disable = omap_mcbsp_clk_disable, + }, + }, + { + .clk = { + .name = "mcbsp_clk", + .id = 4, + .enable = omap_mcbsp_clk_enable, + .disable = omap_mcbsp_clk_disable, + }, + }, + { + .clk = { + .name = "mcbsp_clk", + .id = 5, + .enable = omap_mcbsp_clk_enable, + .disable = omap_mcbsp_clk_disable, + }, + }, }; #define omap_mcbsp_clks_size ARRAY_SIZE(omap_mcbsp_clks) @@ -168,6 +192,33 @@ static struct omap_mcbsp_platform_data omap34xx_mcbsp_pdata[] = { .ops = &omap2_mcbsp_ops, .clk_name = "mcbsp_clk", }, + { + .phys_base = OMAP34XX_MCBSP3_BASE, + .dma_rx_sync = OMAP24XX_DMA_MCBSP3_RX, + .dma_tx_sync = OMAP24XX_DMA_MCBSP3_TX, + .rx_irq = INT_24XX_MCBSP3_IRQ_RX, + .tx_irq = INT_24XX_MCBSP3_IRQ_TX, + .ops = &omap2_mcbsp_ops, + .clk_name = "mcbsp_clk", + }, + { + .phys_base = OMAP34XX_MCBSP4_BASE, + .dma_rx_sync = OMAP24XX_DMA_MCBSP4_RX, + .dma_tx_sync = OMAP24XX_DMA_MCBSP4_TX, + .rx_irq = INT_24XX_MCBSP4_IRQ_RX, + .tx_irq = INT_24XX_MCBSP4_IRQ_TX, + .ops = &omap2_mcbsp_ops, + .clk_name = "mcbsp_clk", + }, + { + .phys_base = OMAP34XX_MCBSP5_BASE, + .dma_rx_sync = OMAP24XX_DMA_MCBSP5_RX, + .dma_tx_sync = OMAP24XX_DMA_MCBSP5_TX, + .rx_irq = INT_24XX_MCBSP5_IRQ_RX, + .tx_irq = INT_24XX_MCBSP5_IRQ_TX, + .ops = &omap2_mcbsp_ops, + .clk_name = "mcbsp_clk", + }, }; #define OMAP34XX_MCBSP_PDATA_SZ ARRAY_SIZE(omap34xx_mcbsp_pdata) #else @@ -198,6 +249,9 @@ static int __init omap2_mcbsp_init(void) if (cpu_is_omap24xx()) omap_mcbsp_register_board_cfg(omap24xx_mcbsp_pdata, OMAP24XX_MCBSP_PDATA_SZ); + if (cpu_is_omap34xx()) + omap_mcbsp_register_board_cfg(omap34xx_mcbsp_pdata, + OMAP34XX_MCBSP_PDATA_SZ); return omap_mcbsp_init(); } diff --git a/arch/arm/plat-omap/include/mach/mcbsp.h b/arch/arm/plat-omap/include/mach/mcbsp.h index 46898faecb1..f4e7980324e 100644 --- a/arch/arm/plat-omap/include/mach/mcbsp.h +++ b/arch/arm/plat-omap/include/mach/mcbsp.h @@ -46,6 +46,9 @@ #define OMAP34XX_MCBSP1_BASE 0x48074000 #define OMAP34XX_MCBSP2_BASE 0x49022000 +#define OMAP34XX_MCBSP3_BASE 0x49024000 +#define OMAP34XX_MCBSP4_BASE 0x49026000 +#define OMAP34XX_MCBSP5_BASE 0x48096000 #if defined(CONFIG_ARCH_OMAP15XX) || defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP730) @@ -267,6 +270,8 @@ typedef enum { OMAP_MCBSP1 = 0, OMAP_MCBSP2, OMAP_MCBSP3, + OMAP_MCBSP4, + OMAP_MCBSP5 } omap_mcbsp_id; typedef int __bitwise omap_mcbsp_io_type_t; -- cgit v1.2.3-70-g09d2 From 05228c35c67995c745ae3c768eaf90740c643fa9 Mon Sep 17 00:00:00 2001 From: Jarkko Nikula Date: Wed, 8 Oct 2008 10:01:40 +0300 Subject: ARM: OMAP: Add support for OMAP2430 in McBSP Signed-off-by: Jarkko Nikula Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/mcbsp.c | 79 ++++++++++++++++++++++++++++----- arch/arm/plat-omap/include/mach/mcbsp.h | 3 ++ 2 files changed, 72 insertions(+), 10 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/mcbsp.c b/arch/arm/mach-omap2/mcbsp.c index b4fe0f3714c..cae3ebe249b 100644 --- a/arch/arm/mach-omap2/mcbsp.c +++ b/arch/arm/mach-omap2/mcbsp.c @@ -145,8 +145,8 @@ static struct omap_mcbsp_ops omap2_mcbsp_ops = { .request = omap2_mcbsp_request, }; -#ifdef CONFIG_ARCH_OMAP24XX -static struct omap_mcbsp_platform_data omap24xx_mcbsp_pdata[] = { +#ifdef CONFIG_ARCH_OMAP2420 +static struct omap_mcbsp_platform_data omap2420_mcbsp_pdata[] = { { .phys_base = OMAP24XX_MCBSP1_BASE, .dma_rx_sync = OMAP24XX_DMA_MCBSP1_RX, @@ -166,10 +166,64 @@ static struct omap_mcbsp_platform_data omap24xx_mcbsp_pdata[] = { .clk_name = "mcbsp_clk", }, }; -#define OMAP24XX_MCBSP_PDATA_SZ ARRAY_SIZE(omap24xx_mcbsp_pdata) +#define OMAP2420_MCBSP_PDATA_SZ ARRAY_SIZE(omap2420_mcbsp_pdata) #else -#define omap24xx_mcbsp_pdata NULL -#define OMAP24XX_MCBSP_PDATA_SZ 0 +#define omap2420_mcbsp_pdata NULL +#define OMAP2420_MCBSP_PDATA_SZ 0 +#endif + +#ifdef CONFIG_ARCH_OMAP2430 +static struct omap_mcbsp_platform_data omap2430_mcbsp_pdata[] = { + { + .phys_base = OMAP24XX_MCBSP1_BASE, + .dma_rx_sync = OMAP24XX_DMA_MCBSP1_RX, + .dma_tx_sync = OMAP24XX_DMA_MCBSP1_TX, + .rx_irq = INT_24XX_MCBSP1_IRQ_RX, + .tx_irq = INT_24XX_MCBSP1_IRQ_TX, + .ops = &omap2_mcbsp_ops, + .clk_name = "mcbsp_clk", + }, + { + .phys_base = OMAP24XX_MCBSP2_BASE, + .dma_rx_sync = OMAP24XX_DMA_MCBSP2_RX, + .dma_tx_sync = OMAP24XX_DMA_MCBSP2_TX, + .rx_irq = INT_24XX_MCBSP2_IRQ_RX, + .tx_irq = INT_24XX_MCBSP2_IRQ_TX, + .ops = &omap2_mcbsp_ops, + .clk_name = "mcbsp_clk", + }, + { + .phys_base = OMAP2430_MCBSP3_BASE, + .dma_rx_sync = OMAP24XX_DMA_MCBSP3_RX, + .dma_tx_sync = OMAP24XX_DMA_MCBSP3_TX, + .rx_irq = INT_24XX_MCBSP3_IRQ_RX, + .tx_irq = INT_24XX_MCBSP3_IRQ_TX, + .ops = &omap2_mcbsp_ops, + .clk_name = "mcbsp_clk", + }, + { + .phys_base = OMAP2430_MCBSP4_BASE, + .dma_rx_sync = OMAP24XX_DMA_MCBSP4_RX, + .dma_tx_sync = OMAP24XX_DMA_MCBSP4_TX, + .rx_irq = INT_24XX_MCBSP4_IRQ_RX, + .tx_irq = INT_24XX_MCBSP4_IRQ_TX, + .ops = &omap2_mcbsp_ops, + .clk_name = "mcbsp_clk", + }, + { + .phys_base = OMAP2430_MCBSP5_BASE, + .dma_rx_sync = OMAP24XX_DMA_MCBSP5_RX, + .dma_tx_sync = OMAP24XX_DMA_MCBSP5_TX, + .rx_irq = INT_24XX_MCBSP5_IRQ_RX, + .tx_irq = INT_24XX_MCBSP5_IRQ_TX, + .ops = &omap2_mcbsp_ops, + .clk_name = "mcbsp_clk", + }, +}; +#define OMAP2430_MCBSP_PDATA_SZ ARRAY_SIZE(omap2430_mcbsp_pdata) +#else +#define omap2430_mcbsp_pdata NULL +#define OMAP2430_MCBSP_PDATA_SZ 0 #endif #ifdef CONFIG_ARCH_OMAP34XX @@ -236,8 +290,10 @@ static int __init omap2_mcbsp_init(void) clk_register(&omap_mcbsp_clks[i].clk); } - if (cpu_is_omap24xx()) - omap_mcbsp_count = OMAP24XX_MCBSP_PDATA_SZ; + if (cpu_is_omap2420()) + omap_mcbsp_count = OMAP2420_MCBSP_PDATA_SZ; + if (cpu_is_omap2430()) + omap_mcbsp_count = OMAP2430_MCBSP_PDATA_SZ; if (cpu_is_omap34xx()) omap_mcbsp_count = OMAP34XX_MCBSP_PDATA_SZ; @@ -246,9 +302,12 @@ static int __init omap2_mcbsp_init(void) if (!mcbsp_ptr) return -ENOMEM; - if (cpu_is_omap24xx()) - omap_mcbsp_register_board_cfg(omap24xx_mcbsp_pdata, - OMAP24XX_MCBSP_PDATA_SZ); + if (cpu_is_omap2420()) + omap_mcbsp_register_board_cfg(omap2420_mcbsp_pdata, + OMAP2420_MCBSP_PDATA_SZ); + if (cpu_is_omap2430()) + omap_mcbsp_register_board_cfg(omap2430_mcbsp_pdata, + OMAP2430_MCBSP_PDATA_SZ); if (cpu_is_omap34xx()) omap_mcbsp_register_board_cfg(omap34xx_mcbsp_pdata, OMAP34XX_MCBSP_PDATA_SZ); diff --git a/arch/arm/plat-omap/include/mach/mcbsp.h b/arch/arm/plat-omap/include/mach/mcbsp.h index f4e7980324e..6a0d1a0a24a 100644 --- a/arch/arm/plat-omap/include/mach/mcbsp.h +++ b/arch/arm/plat-omap/include/mach/mcbsp.h @@ -43,6 +43,9 @@ #define OMAP24XX_MCBSP1_BASE 0x48074000 #define OMAP24XX_MCBSP2_BASE 0x48076000 +#define OMAP2430_MCBSP3_BASE 0x4808c000 +#define OMAP2430_MCBSP4_BASE 0x4808e000 +#define OMAP2430_MCBSP5_BASE 0x48096000 #define OMAP34XX_MCBSP1_BASE 0x48074000 #define OMAP34XX_MCBSP2_BASE 0x49022000 -- cgit v1.2.3-70-g09d2 From 5a07055a3849574f4fbe5d0ce7cd2d26ab9a37c1 Mon Sep 17 00:00:00 2001 From: Jarkko Nikula Date: Wed, 8 Oct 2008 10:01:41 +0300 Subject: ARM: OMAP: Fixes to omap_mcbsp_request function Bootloader may let McBSP logic running so make sure that block is idle before requesting IRQs. Also make sure that TX and RX waitqueues are initialized before request_irq. Signed-off-by: Jarkko Nikula Signed-off-by: Tony Lindgren --- arch/arm/plat-omap/mcbsp.c | 13 +++++++++---- 1 file changed, 9 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/arm/plat-omap/mcbsp.c b/arch/arm/plat-omap/mcbsp.c index f27e641bf81..af33fc713e1 100644 --- a/arch/arm/plat-omap/mcbsp.c +++ b/arch/arm/plat-omap/mcbsp.c @@ -234,8 +234,16 @@ int omap_mcbsp_request(unsigned int id) mcbsp->free = 0; spin_unlock(&mcbsp->lock); + /* + * Make sure that transmitter, receiver and sample-rate generator are + * not running before activating IRQs. + */ + OMAP_MCBSP_WRITE(mcbsp->io_base, SPCR1, 0); + OMAP_MCBSP_WRITE(mcbsp->io_base, SPCR2, 0); + if (mcbsp->io_type == OMAP_MCBSP_IRQ_IO) { /* We need to get IRQs here */ + init_completion(&mcbsp->tx_irq_completion); err = request_irq(mcbsp->tx_irq, omap_mcbsp_tx_irq_handler, 0, "McBSP", (void *)mcbsp); if (err != 0) { @@ -245,8 +253,7 @@ int omap_mcbsp_request(unsigned int id) return err; } - init_completion(&mcbsp->tx_irq_completion); - + init_completion(&mcbsp->rx_irq_completion); err = request_irq(mcbsp->rx_irq, omap_mcbsp_rx_irq_handler, 0, "McBSP", (void *)mcbsp); if (err != 0) { @@ -256,8 +263,6 @@ int omap_mcbsp_request(unsigned int id) free_irq(mcbsp->tx_irq, (void *)mcbsp); return err; } - - init_completion(&mcbsp->rx_irq_completion); } return 0; -- cgit v1.2.3-70-g09d2 From 2e7509e5b3acc4b8653faa1966e5ac234d36ac82 Mon Sep 17 00:00:00 2001 From: Paul Walmsley Date: Thu, 9 Oct 2008 17:51:28 +0300 Subject: ARM: OMAP2: Fix sparse, checkpatch warnings in OMAP2/3 IRQ code Fix sparse warnings in mach-omap2/irq.c. Fix by defining intc_bank_write_reg() and intc_bank_read_reg(), and convert INTC module register access to use them rather than __raw_{read,write}l. Also clear up some checkpatch warnings involving includes from asm/ rather than linux/. Signed-off-by: Paul Walmsley Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/irq.c | 69 +++++++++++++++++++++++++++-------------------- 1 file changed, 40 insertions(+), 29 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/irq.c b/arch/arm/mach-omap2/irq.c index a5c748a4a56..c39e26dc5ee 100644 --- a/arch/arm/mach-omap2/irq.c +++ b/arch/arm/mach-omap2/irq.c @@ -13,17 +13,23 @@ #include #include #include +#include #include #include -#include -#include -#define INTC_REVISION 0x0000 -#define INTC_SYSCONFIG 0x0010 -#define INTC_SYSSTATUS 0x0014 -#define INTC_CONTROL 0x0048 -#define INTC_MIR_CLEAR0 0x0088 -#define INTC_MIR_SET0 0x008c + +/* selected INTC register offsets */ + +#define INTC_REVISION 0x0000 +#define INTC_SYSCONFIG 0x0010 +#define INTC_SYSSTATUS 0x0014 +#define INTC_CONTROL 0x0048 +#define INTC_MIR_CLEAR0 0x0088 +#define INTC_MIR_SET0 0x008c +#define INTC_PENDING_IRQ0 0x0098 + +/* Number of IRQ state bits in each MIR register */ +#define IRQ_BITS_PER_REG 32 /* * OMAP2 has a number of different interrupt controllers, each interrupt @@ -42,36 +48,40 @@ static struct omap_irq_bank { }, }; +/* INTC bank register get/set */ + +static void intc_bank_write_reg(u32 val, struct omap_irq_bank *bank, u16 reg) +{ + __raw_writel(val, bank->base_reg + reg); +} + +static u32 intc_bank_read_reg(struct omap_irq_bank *bank, u16 reg) +{ + return __raw_readl(bank->base_reg + reg); +} + /* XXX: FIQ and additional INTC support (only MPU at the moment) */ static void omap_ack_irq(unsigned int irq) { - __raw_writel(0x1, irq_banks[0].base_reg + INTC_CONTROL); + intc_bank_write_reg(0x1, &irq_banks[0], INTC_CONTROL); } static void omap_mask_irq(unsigned int irq) { - int offset = (irq >> 5) << 5; + int offset = irq & (~(IRQ_BITS_PER_REG - 1)); - if (irq >= 64) { - irq %= 64; - } else if (irq >= 32) { - irq %= 32; - } + irq &= (IRQ_BITS_PER_REG - 1); - __raw_writel(1 << irq, irq_banks[0].base_reg + INTC_MIR_SET0 + offset); + intc_bank_write_reg(1 << irq, &irq_banks[0], INTC_MIR_SET0 + offset); } static void omap_unmask_irq(unsigned int irq) { - int offset = (irq >> 5) << 5; + int offset = irq & (~(IRQ_BITS_PER_REG - 1)); - if (irq >= 64) { - irq %= 64; - } else if (irq >= 32) { - irq %= 32; - } + irq &= (IRQ_BITS_PER_REG - 1); - __raw_writel(1 << irq, irq_banks[0].base_reg + INTC_MIR_CLEAR0 + offset); + intc_bank_write_reg(1 << irq, &irq_banks[0], INTC_MIR_CLEAR0 + offset); } static void omap_mask_ack_irq(unsigned int irq) @@ -91,20 +101,20 @@ static void __init omap_irq_bank_init_one(struct omap_irq_bank *bank) { unsigned long tmp; - tmp = __raw_readl(bank->base_reg + INTC_REVISION) & 0xff; + tmp = intc_bank_read_reg(bank, INTC_REVISION) & 0xff; printk(KERN_INFO "IRQ: Found an INTC at 0x%p " "(revision %ld.%ld) with %d interrupts\n", bank->base_reg, tmp >> 4, tmp & 0xf, bank->nr_irqs); - tmp = __raw_readl(bank->base_reg + INTC_SYSCONFIG); + tmp = intc_bank_read_reg(bank, INTC_SYSCONFIG); tmp |= 1 << 1; /* soft reset */ - __raw_writel(tmp, bank->base_reg + INTC_SYSCONFIG); + intc_bank_write_reg(tmp, bank, INTC_SYSCONFIG); - while (!(__raw_readl(bank->base_reg + INTC_SYSSTATUS) & 0x1)) + while (!(intc_bank_read_reg(bank, INTC_SYSSTATUS) & 0x1)) /* Wait for reset to complete */; /* Enable autoidle */ - __raw_writel(1 << 0, bank->base_reg + INTC_SYSCONFIG); + intc_bank_write_reg(1 << 0, bank, INTC_SYSCONFIG); } void __init omap_init_irq(void) @@ -117,7 +127,8 @@ void __init omap_init_irq(void) struct omap_irq_bank *bank = irq_banks + i; if (cpu_is_omap24xx()) - bank->base_reg = IO_ADDRESS(OMAP24XX_IC_BASE); + bank->base_reg = OMAP2_IO_ADDRESS(OMAP24XX_IC_BASE); + omap_irq_bank_init_one(bank); nr_irqs += bank->nr_irqs; -- cgit v1.2.3-70-g09d2 From cc26b3b01bc96a8b8c36671b0dc4898b2a152ea8 Mon Sep 17 00:00:00 2001 From: "Syed Mohammed, Khasim" Date: Thu, 9 Oct 2008 17:51:41 +0300 Subject: ARM: OMAP3: Add minimal omap3430 support Add minimal omap3430 support based on earlier patches from Syed Mohammed Khasim. Also merge in omap34xx SRAM support from Karthik Dasu and use consistent naming for sram init functions. Also do following changes that make 34xx support usable: - Remove unused sram.c functions for 34xx - Rename IRQ_SIR_IRQ to INTCPS_SIR_IRQ and define it locally in entry-macro.S - Update mach-omap2/io.c to support 2420, 2430, and 34xx - Also merge in 34xx GPMC changes to add fields wr_access and wr_data_mux_bus from Adrian Hunter - Remove memory initialization call omap2_init_memory() until until more generic memory initialization patches are posted. It's OK to rely on bootloader initialization until then. Signed-off-by: Syed Mohammed, Khasim Signed-off-by: Karthik Dasu Signed-off-by: Adrian Hunter Signed-off-by: Tony Lindgren --- arch/arm/Makefile | 1 + arch/arm/mach-omap2/Kconfig | 11 +- arch/arm/mach-omap2/Makefile | 1 + arch/arm/mach-omap2/gpmc.c | 5 + arch/arm/mach-omap2/io.c | 126 +++++++++++++++--- arch/arm/mach-omap2/irq.c | 2 + arch/arm/mach-omap2/memory.c | 14 ++ arch/arm/mach-omap2/mux.c | 67 ++++++++-- arch/arm/mach-omap2/sram34xx.S | 179 ++++++++++++++++++++++++++ arch/arm/plat-omap/Kconfig | 9 +- arch/arm/plat-omap/devices.c | 15 ++- arch/arm/plat-omap/include/mach/debug-macro.S | 12 ++ arch/arm/plat-omap/include/mach/entry-macro.S | 12 +- arch/arm/plat-omap/include/mach/gpmc.h | 4 + arch/arm/plat-omap/include/mach/io.h | 3 - arch/arm/plat-omap/include/mach/irqs.h | 35 +++++ arch/arm/plat-omap/include/mach/mcbsp.h | 2 +- arch/arm/plat-omap/include/mach/memory.h | 2 +- arch/arm/plat-omap/include/mach/mux.h | 26 +++- arch/arm/plat-omap/include/mach/omap24xx.h | 1 - arch/arm/plat-omap/include/mach/sdrc.h | 4 +- arch/arm/plat-omap/include/mach/sram.h | 10 ++ arch/arm/plat-omap/include/mach/system.h | 2 +- arch/arm/plat-omap/io.c | 32 ++++- arch/arm/plat-omap/sram.c | 53 +++----- 25 files changed, 538 insertions(+), 90 deletions(-) create mode 100644 arch/arm/mach-omap2/sram34xx.S (limited to 'arch') diff --git a/arch/arm/Makefile b/arch/arm/Makefile index 703a44fa0f9..552ea6d71ea 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -118,6 +118,7 @@ endif machine-$(CONFIG_ARCH_IXP23XX) := ixp23xx machine-$(CONFIG_ARCH_OMAP1) := omap1 machine-$(CONFIG_ARCH_OMAP2) := omap2 + machine-$(CONFIG_ARCH_OMAP3) := omap2 plat-$(CONFIG_ARCH_OMAP) := omap machine-$(CONFIG_ARCH_S3C2410) := s3c2410 s3c2400 s3c2412 s3c2440 s3c2442 s3c2443 plat-$(CONFIG_PLAT_S3C24XX) := s3c24xx diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index 7069c9d536f..e2481e4045e 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -15,8 +15,17 @@ config ARCH_OMAP2430 bool "OMAP2430 support" depends on ARCH_OMAP24XX +config ARCH_OMAP34XX + bool "OMAP34xx Based System" + depends on ARCH_OMAP3 + +config ARCH_OMAP3430 + bool "OMAP3430 support" + depends on ARCH_OMAP3 && ARCH_OMAP34XX + select ARCH_OMAP_OTG + comment "OMAP Board Type" - depends on ARCH_OMAP2 + depends on ARCH_OMAP2 || ARCH_OMAP3 config MACH_OMAP_GENERIC bool "Generic OMAP board" diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index 800639e7c6a..0dc40db3811 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -12,6 +12,7 @@ obj-$(CONFIG_OMAP_MCBSP) += mcbsp.o # Functions loaded to SRAM obj-$(CONFIG_ARCH_OMAP2420) += sram242x.o obj-$(CONFIG_ARCH_OMAP2430) += sram243x.o +obj-$(CONFIG_ARCH_OMAP3) += sram34xx.o # Power Management ifeq ($(CONFIG_PM),y) diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c index 149bfba43cf..375ad27479c 100644 --- a/arch/arm/mach-omap2/gpmc.c +++ b/arch/arm/mach-omap2/gpmc.c @@ -220,6 +220,11 @@ int gpmc_cs_set_timings(int cs, const struct gpmc_timings *t) GPMC_SET_ONE(GPMC_CS_CONFIG5, 24, 27, page_burst_access); + if (cpu_is_omap34xx()) { + GPMC_SET_ONE(GPMC_CS_CONFIG6, 16, 19, wr_data_mux_bus); + GPMC_SET_ONE(GPMC_CS_CONFIG6, 24, 28, wr_access); + } + /* caller is expected to have initialized CONFIG1 to cover * at least sync vs async */ diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c index 03c6ab1a3b1..71a9de382d2 100644 --- a/arch/arm/mach-omap2/io.c +++ b/arch/arm/mach-omap2/io.c @@ -43,7 +43,9 @@ * The machine specific code may provide the extra mapping besides the * default mapping provided here. */ -static struct map_desc omap2_io_desc[] __initdata = { + +#ifdef CONFIG_ARCH_OMAP24XX +static struct map_desc omap24xx_io_desc[] __initdata = { { .virtual = L3_24XX_VIRT, .pfn = __phys_to_pfn(L3_24XX_PHYS), @@ -51,12 +53,39 @@ static struct map_desc omap2_io_desc[] __initdata = { .type = MT_DEVICE }, { - .virtual = L4_24XX_VIRT, - .pfn = __phys_to_pfn(L4_24XX_PHYS), - .length = L4_24XX_SIZE, - .type = MT_DEVICE + .virtual = L4_24XX_VIRT, + .pfn = __phys_to_pfn(L4_24XX_PHYS), + .length = L4_24XX_SIZE, + .type = MT_DEVICE + }, +}; + +#ifdef CONFIG_ARCH_OMAP2420 +static struct map_desc omap242x_io_desc[] __initdata = { + { + .virtual = DSP_MEM_24XX_VIRT, + .pfn = __phys_to_pfn(DSP_MEM_24XX_PHYS), + .length = DSP_MEM_24XX_SIZE, + .type = MT_DEVICE + }, + { + .virtual = DSP_IPI_24XX_VIRT, + .pfn = __phys_to_pfn(DSP_IPI_24XX_PHYS), + .length = DSP_IPI_24XX_SIZE, + .type = MT_DEVICE }, + { + .virtual = DSP_MMU_24XX_VIRT, + .pfn = __phys_to_pfn(DSP_MMU_24XX_PHYS), + .length = DSP_MMU_24XX_SIZE, + .type = MT_DEVICE + }, +}; + +#endif + #ifdef CONFIG_ARCH_OMAP2430 +static struct map_desc omap243x_io_desc[] __initdata = { { .virtual = L4_WK_243X_VIRT, .pfn = __phys_to_pfn(L4_WK_243X_PHYS), @@ -69,30 +98,90 @@ static struct map_desc omap2_io_desc[] __initdata = { .length = OMAP243X_GPMC_SIZE, .type = MT_DEVICE }, + { + .virtual = OMAP243X_SDRC_VIRT, + .pfn = __phys_to_pfn(OMAP243X_SDRC_PHYS), + .length = OMAP243X_SDRC_SIZE, + .type = MT_DEVICE + }, + { + .virtual = OMAP243X_SMS_VIRT, + .pfn = __phys_to_pfn(OMAP243X_SMS_PHYS), + .length = OMAP243X_SMS_SIZE, + .type = MT_DEVICE + }, +}; #endif +#endif + +#ifdef CONFIG_ARCH_OMAP34XX +static struct map_desc omap34xx_io_desc[] __initdata = { { - .virtual = DSP_MEM_24XX_VIRT, - .pfn = __phys_to_pfn(DSP_MEM_24XX_PHYS), - .length = DSP_MEM_24XX_SIZE, + .virtual = L3_34XX_VIRT, + .pfn = __phys_to_pfn(L3_34XX_PHYS), + .length = L3_34XX_SIZE, .type = MT_DEVICE }, { - .virtual = DSP_IPI_24XX_VIRT, - .pfn = __phys_to_pfn(DSP_IPI_24XX_PHYS), - .length = DSP_IPI_24XX_SIZE, + .virtual = L4_34XX_VIRT, + .pfn = __phys_to_pfn(L4_34XX_PHYS), + .length = L4_34XX_SIZE, .type = MT_DEVICE }, { - .virtual = DSP_MMU_24XX_VIRT, - .pfn = __phys_to_pfn(DSP_MMU_24XX_PHYS), - .length = DSP_MMU_24XX_SIZE, + .virtual = L4_WK_34XX_VIRT, + .pfn = __phys_to_pfn(L4_WK_34XX_PHYS), + .length = L4_WK_34XX_SIZE, + .type = MT_DEVICE + }, + { + .virtual = OMAP34XX_GPMC_VIRT, + .pfn = __phys_to_pfn(OMAP34XX_GPMC_PHYS), + .length = OMAP34XX_GPMC_SIZE, + .type = MT_DEVICE + }, + { + .virtual = OMAP343X_SMS_VIRT, + .pfn = __phys_to_pfn(OMAP343X_SMS_PHYS), + .length = OMAP343X_SMS_SIZE, + .type = MT_DEVICE + }, + { + .virtual = OMAP343X_SDRC_VIRT, + .pfn = __phys_to_pfn(OMAP343X_SDRC_PHYS), + .length = OMAP343X_SDRC_SIZE, .type = MT_DEVICE - } + }, + { + .virtual = L4_PER_34XX_VIRT, + .pfn = __phys_to_pfn(L4_PER_34XX_PHYS), + .length = L4_PER_34XX_SIZE, + .type = MT_DEVICE + }, + { + .virtual = L4_EMU_34XX_VIRT, + .pfn = __phys_to_pfn(L4_EMU_34XX_PHYS), + .length = L4_EMU_34XX_SIZE, + .type = MT_DEVICE + }, }; +#endif void __init omap2_map_common_io(void) { - iotable_init(omap2_io_desc, ARRAY_SIZE(omap2_io_desc)); +#if defined(CONFIG_ARCH_OMAP2420) + iotable_init(omap24xx_io_desc, ARRAY_SIZE(omap24xx_io_desc)); + iotable_init(omap242x_io_desc, ARRAY_SIZE(omap242x_io_desc)); +#endif + +#if defined(CONFIG_ARCH_OMAP2430) + iotable_init(omap24xx_io_desc, ARRAY_SIZE(omap24xx_io_desc)); + iotable_init(omap243x_io_desc, ARRAY_SIZE(omap243x_io_desc)); +#endif + +#if defined(CONFIG_ARCH_OMAP34XX) + iotable_init(omap34xx_io_desc, ARRAY_SIZE(omap34xx_io_desc)); +#endif /* Normally devicemaps_init() would flush caches and tlb after * mdesc->map_io(), but we must also do it here because of the CPU @@ -112,11 +201,6 @@ void __init omap2_init_common_hw(void) pwrdm_init(powerdomains_omap); clkdm_init(clockdomains_omap, clkdm_pwrdm_autodeps); omap2_clk_init(); -/* - * Need to Fix this for 2430 - */ -#ifndef CONFIG_ARCH_OMAP2430 omap2_init_memory(); -#endif gpmc_init(); } diff --git a/arch/arm/mach-omap2/irq.c b/arch/arm/mach-omap2/irq.c index c39e26dc5ee..d354e0fe447 100644 --- a/arch/arm/mach-omap2/irq.c +++ b/arch/arm/mach-omap2/irq.c @@ -128,6 +128,8 @@ void __init omap_init_irq(void) if (cpu_is_omap24xx()) bank->base_reg = OMAP2_IO_ADDRESS(OMAP24XX_IC_BASE); + else if (cpu_is_omap34xx()) + bank->base_reg = OMAP2_IO_ADDRESS(OMAP34XX_IC_BASE); omap_irq_bank_init_one(bank); diff --git a/arch/arm/mach-omap2/memory.c b/arch/arm/mach-omap2/memory.c index 6b49cc9cbdc..48b01f4cebc 100644 --- a/arch/arm/mach-omap2/memory.c +++ b/arch/arm/mach-omap2/memory.c @@ -102,6 +102,17 @@ u32 omap2_reprogram_sdrc(u32 level, u32 force) return prev; } +#if !defined(CONFIG_ARCH_OMAP2) +void omap2_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl, + u32 base_cs, u32 force_unlock) +{ +} +void omap2_sram_reprogram_sdrc(u32 perf_level, u32 dll_val, + u32 mem_type) +{ +} +#endif + void omap2_init_memory_params(u32 force_lock_to_unlock_mode) { unsigned long dll_cnt; @@ -166,6 +177,9 @@ void __init omap2_init_memory(void) { u32 l; + if (!cpu_is_omap2420()) + return; + l = sms_read_reg(SMS_SYSCONFIG); l &= ~(0x3 << 3); l |= (0x2 << 3); diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c index 6188e2f9785..5558803cd99 100644 --- a/arch/arm/mach-omap2/mux.c +++ b/arch/arm/mach-omap2/mux.c @@ -298,13 +298,13 @@ MUX_CFG_34XX("T2_3430_USB2HS_PHY_D7", 0x1d6, /* TLL - HSUSB: 12-pin TLL Port 1*/ MUX_CFG_34XX("Y8_3430_USB1HS_TLL_CLK", 0x5da, - OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_OUTPUT) -MUX_CFG_34XX("Y9_3430_USB1HS_TLL_STP", 0x5d8, OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN) +MUX_CFG_34XX("Y9_3430_USB1HS_TLL_STP", 0x5d8, + OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLUP) MUX_CFG_34XX("AA14_3430_USB1HS_TLL_DIR", 0x5ec, - OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_OUTPUT) + OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN) MUX_CFG_34XX("AA11_3430_USB1HS_TLL_NXT", 0x5ee, - OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_OUTPUT) + OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN) MUX_CFG_34XX("W13_3430_USB1HS_TLL_D0", 0x5dc, OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN) MUX_CFG_34XX("W12_3430_USB1HS_TLL_D1", 0x5de, @@ -324,13 +324,13 @@ MUX_CFG_34XX("Y13_3430_USB1HS_TLL_D7", 0x5e2, /* TLL - HSUSB: 12-pin TLL Port 2*/ MUX_CFG_34XX("AA8_3430_USB2HS_TLL_CLK", 0x5f0, - OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_OUTPUT) -MUX_CFG_34XX("AA10_3430_USB2HS_TLL_STP", 0x5f2, OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN) +MUX_CFG_34XX("AA10_3430_USB2HS_TLL_STP", 0x5f2, + OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLUP) MUX_CFG_34XX("AA9_3430_USB2HS_TLL_DIR", 0x5f4, - OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_OUTPUT) + OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN) MUX_CFG_34XX("AB11_3430_USB2HS_TLL_NXT", 0x5f6, - OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_OUTPUT) + OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN) MUX_CFG_34XX("AB10_3430_USB2HS_TLL_D0", 0x5f8, OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN) MUX_CFG_34XX("AB9_3430_USB2HS_TLL_D1", 0x5fa, @@ -350,13 +350,13 @@ MUX_CFG_34XX("T2_3430_USB2HS_TLL_D7", 0x1d6, /* TLL - HSUSB: 12-pin TLL Port 3*/ MUX_CFG_34XX("AA6_3430_USB3HS_TLL_CLK", 0x180, - OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_OUTPUT) -MUX_CFG_34XX("AB3_3430_USB3HS_TLL_STP", 0x166, OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN) +MUX_CFG_34XX("AB3_3430_USB3HS_TLL_STP", 0x166, + OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLUP) MUX_CFG_34XX("AA3_3430_USB3HS_TLL_DIR", 0x168, - OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_OUTPUT) + OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN) MUX_CFG_34XX("Y3_3430_USB3HS_TLL_NXT", 0x16a, - OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_OUTPUT) + OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN) MUX_CFG_34XX("AA5_3430_USB3HS_TLL_D0", 0x186, OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN) MUX_CFG_34XX("Y4_3430_USB3HS_TLL_D1", 0x184, @@ -373,6 +373,49 @@ MUX_CFG_34XX("AA13_3430_USB3HS_TLL_D6", 0x170, OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN) MUX_CFG_34XX("AA12_3430_USB3HS_TLL_D7", 0x172, OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN) + +/* PHY FSUSB: FS Serial for Port 1 (multiple PHY modes supported) */ +MUX_CFG_34XX("AF10_3430_USB1FS_PHY_MM1_RXDP", 0x5d8, + OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN) +MUX_CFG_34XX("AG9_3430_USB1FS_PHY_MM1_RXDM", 0x5ee, + OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN) +MUX_CFG_34XX("W13_3430_USB1FS_PHY_MM1_RXRCV", 0x5dc, + OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN) +MUX_CFG_34XX("W12_3430_USB1FS_PHY_MM1_TXSE0", 0x5de, + OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN) +MUX_CFG_34XX("W11_3430_USB1FS_PHY_MM1_TXDAT", 0x5e0, + OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN) +MUX_CFG_34XX("Y11_3430_USB1FS_PHY_MM1_TXEN_N", 0x5ea, + OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_OUTPUT) + +/* PHY FSUSB: FS Serial for Port 2 (multiple PHY modes supported) */ +MUX_CFG_34XX("AF7_3430_USB2FS_PHY_MM2_RXDP", 0x5f2, + OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN) +MUX_CFG_34XX("AH7_3430_USB2FS_PHY_MM2_RXDM", 0x5f6, + OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN) +MUX_CFG_34XX("AB10_3430_USB2FS_PHY_MM2_RXRCV", 0x5f8, + OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN) +MUX_CFG_34XX("AB9_3430_USB2FS_PHY_MM2_TXSE0", 0x5fa, + OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN) +MUX_CFG_34XX("W3_3430_USB2FS_PHY_MM2_TXDAT", 0x1d4, + OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN) +MUX_CFG_34XX("T4_3430_USB2FS_PHY_MM2_TXEN_N", 0x1de, + OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_OUTPUT) + +/* PHY FSUSB: FS Serial for Port 3 (multiple PHY modes supported) */ +MUX_CFG_34XX("AH3_3430_USB3FS_PHY_MM3_RXDP", 0x166, + OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN) +MUX_CFG_34XX("AE3_3430_USB3FS_PHY_MM3_RXDM", 0x16a, + OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN) +MUX_CFG_34XX("AD1_3430_USB3FS_PHY_MM3_RXRCV", 0x186, + OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN) +MUX_CFG_34XX("AE1_3430_USB3FS_PHY_MM3_TXSE0", 0x184, + OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN) +MUX_CFG_34XX("AD2_3430_USB3FS_PHY_MM3_TXDAT", 0x188, + OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN) +MUX_CFG_34XX("AC1_3430_USB3FS_PHY_MM3_TXEN_N", 0x18a, + OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_OUTPUT) + }; #define OMAP34XX_PINS_SZ ARRAY_SIZE(omap34xx_pins) diff --git a/arch/arm/mach-omap2/sram34xx.S b/arch/arm/mach-omap2/sram34xx.S new file mode 100644 index 00000000000..2c714613634 --- /dev/null +++ b/arch/arm/mach-omap2/sram34xx.S @@ -0,0 +1,179 @@ +/* + * linux/arch/arm/mach-omap3/sram.S + * + * Omap3 specific functions that need to be run in internal SRAM + * + * (C) Copyright 2007 + * Texas Instruments Inc. + * Rajendra Nayak + * + * (C) Copyright 2004 + * Texas Instruments, + * Richard Woodruff + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#include +#include +#include + +#include + +#include "sdrc.h" +#include "cm.h" + + .text + +/* + * Change frequency of core dpll + * r0 = sdrc_rfr_ctrl r1 = sdrc_actim_ctrla r2 = sdrc_actim_ctrlb r3 = M2 + */ +ENTRY(omap3_sram_configure_core_dpll) + stmfd sp!, {r1-r12, lr} @ store regs to stack + cmp r3, #0x2 + blne configure_sdrc + cmp r3, #0x2 + blne lock_dll + cmp r3, #0x1 + blne unlock_dll + bl sdram_in_selfrefresh @ put the SDRAM in self refresh + bl configure_core_dpll + bl enable_sdrc + cmp r3, #0x1 + blne wait_dll_unlock + cmp r3, #0x2 + blne wait_dll_lock + cmp r3, #0x1 + blne configure_sdrc + mov r0, #0 @ return value + ldmfd sp!, {r1-r12, pc} @ restore regs and return +unlock_dll: + ldr r4, omap3_sdrc_dlla_ctrl + ldr r5, [r4] + orr r5, r5, #0x4 + str r5, [r4] + bx lr +lock_dll: + ldr r4, omap3_sdrc_dlla_ctrl + ldr r5, [r4] + bic r5, r5, #0x4 + str r5, [r4] + bx lr +sdram_in_selfrefresh: + mov r5, #0x0 @ Move 0 to R5 + mcr p15, 0, r5, c7, c10, 5 @ memory barrier + ldr r4, omap3_sdrc_power @ read the SDRC_POWER register + ldr r5, [r4] @ read the contents of SDRC_POWER + orr r5, r5, #0x40 @ enable self refresh on idle req + str r5, [r4] @ write back to SDRC_POWER register + ldr r4, omap3_cm_iclken1_core @ read the CM_ICLKEN1_CORE reg + ldr r5, [r4] + bic r5, r5, #0x2 @ disable iclk bit for SRDC + str r5, [r4] +wait_sdrc_idle: + ldr r4, omap3_cm_idlest1_core + ldr r5, [r4] + and r5, r5, #0x2 @ check for SDRC idle + cmp r5, #2 + bne wait_sdrc_idle + bx lr +configure_core_dpll: + ldr r4, omap3_cm_clksel1_pll + ldr r5, [r4] + ldr r6, core_m2_mask_val @ modify m2 for core dpll + and r5, r5, r6 + orr r5, r5, r3, lsl #0x1B @ r3 contains the M2 val + str r5, [r4] + mov r5, #0x800 @ wait for the clock to stabilise + cmp r3, #2 + bne wait_clk_stable + bx lr +wait_clk_stable: + subs r5, r5, #1 + bne wait_clk_stable + nop + nop + nop + nop + nop + nop + nop + nop + nop + nop + bx lr +enable_sdrc: + ldr r4, omap3_cm_iclken1_core + ldr r5, [r4] + orr r5, r5, #0x2 @ enable iclk bit for SDRC + str r5, [r4] +wait_sdrc_idle1: + ldr r4, omap3_cm_idlest1_core + ldr r5, [r4] + and r5, r5, #0x2 + cmp r5, #0 + bne wait_sdrc_idle1 + ldr r4, omap3_sdrc_power + ldr r5, [r4] + bic r5, r5, #0x40 + str r5, [r4] + bx lr +wait_dll_lock: + ldr r4, omap3_sdrc_dlla_status + ldr r5, [r4] + and r5, r5, #0x4 + cmp r5, #0x4 + bne wait_dll_lock + bx lr +wait_dll_unlock: + ldr r4, omap3_sdrc_dlla_status + ldr r5, [r4] + and r5, r5, #0x4 + cmp r5, #0x0 + bne wait_dll_unlock + bx lr +configure_sdrc: + ldr r4, omap3_sdrc_rfr_ctrl + str r0, [r4] + ldr r4, omap3_sdrc_actim_ctrla + str r1, [r4] + ldr r4, omap3_sdrc_actim_ctrlb + str r2, [r4] + bx lr + +omap3_sdrc_power: + .word OMAP34XX_SDRC_REGADDR(SDRC_POWER) +omap3_cm_clksel1_pll: + .word OMAP34XX_CM_REGADDR(PLL_MOD, CM_CLKSEL1) +omap3_cm_idlest1_core: + .word OMAP34XX_CM_REGADDR(CORE_MOD, CM_IDLEST) +omap3_cm_iclken1_core: + .word OMAP34XX_CM_REGADDR(CORE_MOD, CM_ICLKEN1) +omap3_sdrc_rfr_ctrl: + .word OMAP34XX_SDRC_REGADDR(SDRC_RFR_CTRL_0) +omap3_sdrc_actim_ctrla: + .word OMAP34XX_SDRC_REGADDR(SDRC_ACTIM_CTRL_A_0) +omap3_sdrc_actim_ctrlb: + .word OMAP34XX_SDRC_REGADDR(SDRC_ACTIM_CTRL_B_0) +omap3_sdrc_dlla_status: + .word OMAP34XX_SDRC_REGADDR(SDRC_DLLA_STATUS) +omap3_sdrc_dlla_ctrl: + .word OMAP34XX_SDRC_REGADDR(SDRC_DLLA_CTRL) +core_m2_mask_val: + .word 0x07FFFFFF + +ENTRY(omap3_sram_configure_core_dpll_sz) + .word . - omap3_sram_configure_core_dpll diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig index ef62bf21e17..a94f0c44ebc 100644 --- a/arch/arm/plat-omap/Kconfig +++ b/arch/arm/plat-omap/Kconfig @@ -15,6 +15,9 @@ config ARCH_OMAP1 config ARCH_OMAP2 bool "TI OMAP2" +config ARCH_OMAP3 + bool "TI OMAP3" + endchoice comment "OMAP Feature Selections" @@ -112,13 +115,13 @@ config OMAP_MPU_TIMER config OMAP_32K_TIMER bool "Use 32KHz timer" - depends on ARCH_OMAP16XX || ARCH_OMAP24XX + depends on ARCH_OMAP16XX || ARCH_OMAP24XX || ARCH_OMAP34XX help Select this option if you want to enable the OMAP 32KHz timer. This timer saves power compared to the OMAP_MPU_TIMER, and has support for no tick during idle. The 32KHz timer provides less intra-tick resolution than OMAP_MPU_TIMER. The 32KHz timer is - currently only available for OMAP16XX and 24XX. + currently only available for OMAP16XX, 24XX and 34XX. endchoice @@ -133,7 +136,7 @@ config OMAP_32K_TIMER_HZ config OMAP_DM_TIMER bool "Use dual-mode timer" - depends on ARCH_OMAP16XX || ARCH_OMAP24XX + depends on ARCH_OMAP16XX || ARCH_OMAP24XX || ARCH_OMAP34XX help Select this option if you want to use OMAP Dual-Mode timers. diff --git a/arch/arm/plat-omap/devices.c b/arch/arm/plat-omap/devices.c index 1c1d831a0c0..2625ce32e60 100644 --- a/arch/arm/plat-omap/devices.c +++ b/arch/arm/plat-omap/devices.c @@ -94,6 +94,10 @@ static inline void omap_init_dsp(void) { } static void omap_init_kp(void) { + /* 2430 and 34xx keypad is on TWL4030 */ + if (cpu_is_omap2430() || cpu_is_omap34xx()) + return; + if (machine_is_omap_h2() || machine_is_omap_h3()) { omap_cfg_reg(F18_1610_KBC0); omap_cfg_reg(D20_1610_KBC1); @@ -395,8 +399,17 @@ static inline void omap_init_uwire(void) {} #if defined(CONFIG_OMAP_WATCHDOG) || defined(CONFIG_OMAP_WATCHDOG_MODULE) -#ifdef CONFIG_ARCH_OMAP24XX +#if defined(CONFIG_ARCH_OMAP34XX) +#define OMAP_WDT_BASE 0x48314000 +#elif defined(CONFIG_ARCH_OMAP24XX) + +#ifdef CONFIG_ARCH_OMAP2430 +/* WDT2 */ +#define OMAP_WDT_BASE 0x49016000 +#else #define OMAP_WDT_BASE 0x48022000 +#endif + #else #define OMAP_WDT_BASE 0xfffeb000 #endif diff --git a/arch/arm/plat-omap/include/mach/debug-macro.S b/arch/arm/plat-omap/include/mach/debug-macro.S index 1b0039bdeb4..1b11f5c6a2d 100644 --- a/arch/arm/plat-omap/include/mach/debug-macro.S +++ b/arch/arm/plat-omap/include/mach/debug-macro.S @@ -35,6 +35,18 @@ #ifdef CONFIG_OMAP_LL_DEBUG_UART3 add \rx, \rx, #0x00004000 @ UART 3 #endif + +#elif CONFIG_ARCH_OMAP3 + moveq \rx, #0x48000000 @ physical base address + movne \rx, #0xd8000000 @ virtual base + orr \rx, \rx, #0x0006a000 +#ifdef CONFIG_OMAP_LL_DEBUG_UART2 + add \rx, \rx, #0x00002000 @ UART 2 +#endif +#ifdef CONFIG_OMAP_LL_DEBUG_UART3 + add \rx, \rx, #0x00fb0000 @ UART 3 + add \rx, \rx, #0x00006000 +#endif #endif .endm diff --git a/arch/arm/plat-omap/include/mach/entry-macro.S b/arch/arm/plat-omap/include/mach/entry-macro.S index d4e9043bf20..030118ee204 100644 --- a/arch/arm/plat-omap/include/mach/entry-macro.S +++ b/arch/arm/plat-omap/include/mach/entry-macro.S @@ -55,9 +55,17 @@ 1510: .endm -#elif defined(CONFIG_ARCH_OMAP24XX) +#endif +#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) +#if defined(CONFIG_ARCH_OMAP24XX) #include +#endif +#if defined(CONFIG_ARCH_OMAP34XX) +#include +#endif + +#define INTCPS_SIR_IRQ_OFFSET 0x0040 /* Active interrupt number */ .macro disable_fiq .endm @@ -79,7 +87,7 @@ ldr \irqnr, [\base, #0xd8] /* IRQ pending reg 3 */ cmp \irqnr, #0x0 2222: - ldrne \irqnr, [\base, #IRQ_SIR_IRQ] + ldrne \irqnr, [\base, #INTCPS_SIR_IRQ_OFFSET] .endm diff --git a/arch/arm/plat-omap/include/mach/gpmc.h b/arch/arm/plat-omap/include/mach/gpmc.h index 3c7b425c585..45b678439bb 100644 --- a/arch/arm/plat-omap/include/mach/gpmc.h +++ b/arch/arm/plat-omap/include/mach/gpmc.h @@ -84,6 +84,10 @@ struct gpmc_timings { u16 access; /* Start-cycle to first data valid delay */ u16 rd_cycle; /* Total read cycle time */ u16 wr_cycle; /* Total write cycle time */ + + /* The following are only on OMAP3430 */ + u16 wr_access; /* WRACCESSTIME */ + u16 wr_data_mux_bus; /* WRDATAONADMUXBUS */ }; extern unsigned int gpmc_ns_to_ticks(unsigned int time_ns); diff --git a/arch/arm/plat-omap/include/mach/io.h b/arch/arm/plat-omap/include/mach/io.h index dd0cf069431..adc83b7b820 100644 --- a/arch/arm/plat-omap/include/mach/io.h +++ b/arch/arm/plat-omap/include/mach/io.h @@ -73,7 +73,6 @@ #define L4_24XX_VIRT 0xd8000000 #define L4_24XX_SIZE SZ_1M /* 1MB of 128MB used, want 1MB sect */ -#ifdef CONFIG_ARCH_OMAP2430 #define L4_WK_243X_PHYS L4_WK_243X_BASE /* 0x49000000 */ #define L4_WK_243X_VIRT 0xd9000000 #define L4_WK_243X_SIZE SZ_1M @@ -87,8 +86,6 @@ #define OMAP243X_SMS_VIRT 0xFC000000 #define OMAP243X_SMS_SIZE SZ_1M -#endif - #define IO_OFFSET 0x90000000 #define __IO_ADDRESS(pa) ((pa) + IO_OFFSET) /* Works for L3 and L4 */ #define __OMAP2_IO_ADDRESS(pa) ((pa) + IO_OFFSET) /* Works for L3 and L4 */ diff --git a/arch/arm/plat-omap/include/mach/irqs.h b/arch/arm/plat-omap/include/mach/irqs.h index e9fd63055cb..9ee04969d36 100644 --- a/arch/arm/plat-omap/include/mach/irqs.h +++ b/arch/arm/plat-omap/include/mach/irqs.h @@ -286,6 +286,41 @@ #define INT_24XX_USB_IRQ_OTG 80 #define INT_24XX_MMC_IRQ 83 +#define INT_34XX_BENCH_MPU_EMUL 3 +#define INT_34XX_ST_MCBSP2_IRQ 4 +#define INT_34XX_ST_MCBSP3_IRQ 5 +#define INT_34XX_SSM_ABORT_IRQ 6 +#define INT_34XX_SYS_NIRQ 7 +#define INT_34XX_D2D_FW_IRQ 8 +#define INT_34XX_PRCM_MPU_IRQ 11 +#define INT_34XX_MCBSP1_IRQ 16 +#define INT_34XX_MCBSP2_IRQ 17 +#define INT_34XX_MCBSP3_IRQ 22 +#define INT_34XX_MCBSP4_IRQ 23 +#define INT_34XX_CAM_IRQ 24 +#define INT_34XX_MCBSP5_IRQ 27 +#define INT_34XX_GPIO_BANK1 29 +#define INT_34XX_GPIO_BANK2 30 +#define INT_34XX_GPIO_BANK3 31 +#define INT_34XX_GPIO_BANK4 32 +#define INT_34XX_GPIO_BANK5 33 +#define INT_34XX_GPIO_BANK6 34 +#define INT_34XX_USIM_IRQ 35 +#define INT_34XX_WDT3_IRQ 36 +#define INT_34XX_SPI4_IRQ 48 +#define INT_34XX_SHA1MD52_IRQ 49 +#define INT_34XX_FPKA_READY_IRQ 50 +#define INT_34XX_SHA1MD51_IRQ 51 +#define INT_34XX_RNG_IRQ 52 +#define INT_34XX_I2C3_IRQ 61 +#define INT_34XX_FPKA_ERROR_IRQ 64 +#define INT_34XX_PBIAS_IRQ 75 +#define INT_34XX_OHCI_IRQ 76 +#define INT_34XX_EHCI_IRQ 77 +#define INT_34XX_TLL_IRQ 78 +#define INT_34XX_PARTHASH_IRQ 79 +#define INT_34XX_MMC3_IRQ 94 +#define INT_34XX_GPT12_IRQ 95 /* Max. 128 level 2 IRQs (OMAP1610), 192 GPIOs (OMAP730) and * 16 MPUIO lines */ #define OMAP_MAX_GPIO_LINES 192 diff --git a/arch/arm/plat-omap/include/mach/mcbsp.h b/arch/arm/plat-omap/include/mach/mcbsp.h index a3074f2fb7c..c8d0aa118be 100644 --- a/arch/arm/plat-omap/include/mach/mcbsp.h +++ b/arch/arm/plat-omap/include/mach/mcbsp.h @@ -91,7 +91,7 @@ #define AUDIO_DMA_TX OMAP_DMA_MCBSP1_TX #define AUDIO_DMA_RX OMAP_DMA_MCBSP1_RX -#elif defined(CONFIG_ARCH_OMAP24XX) +#elif defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) #define OMAP_MCBSP_REG_DRR2 0x00 #define OMAP_MCBSP_REG_DRR1 0x04 diff --git a/arch/arm/plat-omap/include/mach/memory.h b/arch/arm/plat-omap/include/mach/memory.h index a325caf80d0..d40cac60b95 100644 --- a/arch/arm/plat-omap/include/mach/memory.h +++ b/arch/arm/plat-omap/include/mach/memory.h @@ -38,7 +38,7 @@ */ #if defined(CONFIG_ARCH_OMAP1) #define PHYS_OFFSET UL(0x10000000) -#elif defined(CONFIG_ARCH_OMAP2) +#elif defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) #define PHYS_OFFSET UL(0x80000000) #endif diff --git a/arch/arm/plat-omap/include/mach/mux.h b/arch/arm/plat-omap/include/mach/mux.h index 5670d563f37..6bbf1789bed 100644 --- a/arch/arm/plat-omap/include/mach/mux.h +++ b/arch/arm/plat-omap/include/mach/mux.h @@ -723,7 +723,31 @@ enum omap34xx_index { AB12_3430_USB3HS_TLL_DATA4, AB13_3430_USB3HS_TLL_DATA5, AA13_3430_USB3HS_TLL_DATA6, - AA12_3430_USB3HS_TLL_DATA7 + AA12_3430_USB3HS_TLL_DATA7, + + /* PHY FSUSB: FS Serial for Port 1 (multiple PHY modes supported) */ + AF10_3430_USB1FS_PHY_MM1_RXDP, + AG9_3430_USB1FS_PHY_MM1_RXDM, + W13_3430_USB1FS_PHY_MM1_RXRCV, + W12_3430_USB1FS_PHY_MM1_TXSE0, + W11_3430_USB1FS_PHY_MM1_TXDAT, + Y11_3430_USB1FS_PHY_MM1_TXEN_N, + + /* PHY FSUSB: FS Serial for Port 2 (multiple PHY modes supported) */ + AF7_3430_USB2FS_PHY_MM2_RXDP, + AH7_3430_USB2FS_PHY_MM2_RXDM, + AB10_3430_USB2FS_PHY_MM2_RXRCV, + AB9_3430_USB2FS_PHY_MM2_TXSE0, + W3_3430_USB2FS_PHY_MM2_TXDAT, + T4_3430_USB2FS_PHY_MM2_TXEN_N, + + /* PHY FSUSB: FS Serial for Port 3 (multiple PHY modes supported) */ + AH3_3430_USB3FS_PHY_MM3_RXDP, + AE3_3430_USB3FS_PHY_MM3_RXDM, + AD1_3430_USB3FS_PHY_MM3_RXRCV, + AE1_3430_USB3FS_PHY_MM3_TXSE0, + AD2_3430_USB3FS_PHY_MM3_TXDAT, + AC1_3430_USB3FS_PHY_MM3_TXEN_N, }; diff --git a/arch/arm/plat-omap/include/mach/omap24xx.h b/arch/arm/plat-omap/include/mach/omap24xx.h index 556f0eb4d55..24335d4932f 100644 --- a/arch/arm/plat-omap/include/mach/omap24xx.h +++ b/arch/arm/plat-omap/include/mach/omap24xx.h @@ -39,7 +39,6 @@ /* interrupt controller */ #define OMAP24XX_IC_BASE (L4_24XX_BASE + 0xfe000) #define OMAP24XX_IVA_INTC_BASE 0x40000000 -#define IRQ_SIR_IRQ 0x0040 #define OMAP2420_CTRL_BASE L4_24XX_BASE #define OMAP2420_32KSYNCT_BASE (L4_24XX_BASE + 0x4000) diff --git a/arch/arm/plat-omap/include/mach/sdrc.h b/arch/arm/plat-omap/include/mach/sdrc.h index 25ee3819faa..a98c6c3beb2 100644 --- a/arch/arm/plat-omap/include/mach/sdrc.h +++ b/arch/arm/plat-omap/include/mach/sdrc.h @@ -25,8 +25,8 @@ #define SDRC_DLLB_STATUS 0x06C #define SDRC_POWER 0x070 #define SDRC_MR_0 0x084 -#define SDRC_ACTIM_CTRL_A 0x09c -#define SDRC_ACTIM_CTRL_B 0x0a0 +#define SDRC_ACTIM_CTRL_A_0 0x09c +#define SDRC_ACTIM_CTRL_B_0 0x0a0 #define SDRC_RFR_CTRL_0 0x0a4 /* diff --git a/arch/arm/plat-omap/include/mach/sram.h b/arch/arm/plat-omap/include/mach/sram.h index e0932344998..ab35d622dcf 100644 --- a/arch/arm/plat-omap/include/mach/sram.h +++ b/arch/arm/plat-omap/include/mach/sram.h @@ -21,6 +21,10 @@ extern void omap2_sram_reprogram_sdrc(u32 perf_level, u32 dll_val, u32 mem_type); extern u32 omap2_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass); +extern u32 omap3_configure_core_dpll(u32 sdrc_rfr_ctrl, + u32 sdrc_actim_ctrla, + u32 sdrc_actim_ctrlb, u32 m2); + /* Do not use these */ extern void omap1_sram_reprogram_clock(u32 ckctl, u32 dpllctl); extern unsigned long omap1_sram_reprogram_clock_sz; @@ -53,4 +57,10 @@ extern void omap243x_sram_reprogram_sdrc(u32 perf_level, u32 dll_val, u32 mem_type); extern unsigned long omap243x_sram_reprogram_sdrc_sz; + +extern u32 omap3_sram_configure_core_dpll(u32 sdrc_rfr_ctrl, + u32 sdrc_actim_ctrla, + u32 sdrc_actim_ctrlb, u32 m2); +extern unsigned long omap3_sram_configure_core_dpll_sz; + #endif diff --git a/arch/arm/plat-omap/include/mach/system.h b/arch/arm/plat-omap/include/mach/system.h index 06a28c7b98d..06923f26154 100644 --- a/arch/arm/plat-omap/include/mach/system.h +++ b/arch/arm/plat-omap/include/mach/system.h @@ -40,7 +40,7 @@ static inline void omap1_arch_reset(char mode) static inline void arch_reset(char mode) { - if (!cpu_is_omap24xx()) + if (!cpu_class_is_omap2()) omap1_arch_reset(mode); else omap_prcm_arch_reset(mode); diff --git a/arch/arm/plat-omap/io.c b/arch/arm/plat-omap/io.c index 0253c456ed5..af326efc1ad 100644 --- a/arch/arm/plat-omap/io.c +++ b/arch/arm/plat-omap/io.c @@ -47,11 +47,13 @@ void __iomem *omap_ioremap(unsigned long p, size_t size, unsigned int type) } #endif #ifdef CONFIG_ARCH_OMAP2 - if (cpu_class_is_omap2()) { + if (cpu_is_omap24xx()) { if (BETWEEN(p, L3_24XX_PHYS, L3_24XX_SIZE)) return XLATE(p, L3_24XX_PHYS, L3_24XX_VIRT); if (BETWEEN(p, L4_24XX_PHYS, L4_24XX_SIZE)) return XLATE(p, L4_24XX_PHYS, L4_24XX_VIRT); + } + if (cpu_is_omap2420()) { if (BETWEEN(p, DSP_MEM_24XX_PHYS, DSP_MEM_24XX_SIZE)) return XLATE(p, DSP_MEM_24XX_PHYS, DSP_MEM_24XX_VIRT); if (BETWEEN(p, DSP_IPI_24XX_PHYS, DSP_IPI_24XX_SIZE)) @@ -59,14 +61,36 @@ void __iomem *omap_ioremap(unsigned long p, size_t size, unsigned int type) if (BETWEEN(p, DSP_MMU_24XX_PHYS, DSP_MMU_24XX_SIZE)) return XLATE(p, DSP_MMU_24XX_PHYS, DSP_MMU_24XX_VIRT); } -#ifdef CONFIG_ARCH_OMAP2430 if (cpu_is_omap2430()) { if (BETWEEN(p, L4_WK_243X_PHYS, L4_WK_243X_SIZE)) - return XLATE(L4_WK_243X_PHYS, L4_WK_243X_VIRT); + return XLATE(p, L4_WK_243X_PHYS, L4_WK_243X_VIRT); if (BETWEEN(p, OMAP243X_GPMC_PHYS, OMAP243X_GPMC_SIZE)) - return XLATE(OMAP243X_GPMC_PHYS, OMAP243X_GPMC_VIRT); + return XLATE(p, OMAP243X_GPMC_PHYS, OMAP243X_GPMC_VIRT); + if (BETWEEN(p, OMAP243X_SDRC_PHYS, OMAP243X_SDRC_SIZE)) + return XLATE(p, OMAP243X_SDRC_PHYS, OMAP243X_SDRC_VIRT); + if (BETWEEN(p, OMAP243X_SMS_PHYS, OMAP243X_SMS_SIZE)) + return XLATE(p, OMAP243X_SMS_PHYS, OMAP243X_SMS_VIRT); } #endif +#ifdef CONFIG_ARCH_OMAP3 + if (cpu_is_omap34xx()) { + if (BETWEEN(p, L3_34XX_PHYS, L3_34XX_SIZE)) + return XLATE(p, L3_34XX_PHYS, L3_34XX_VIRT); + if (BETWEEN(p, L4_34XX_PHYS, L4_34XX_SIZE)) + return XLATE(p, L4_34XX_PHYS, L4_34XX_VIRT); + if (BETWEEN(p, L4_WK_34XX_PHYS, L4_WK_34XX_SIZE)) + return XLATE(p, L4_WK_34XX_PHYS, L4_WK_34XX_VIRT); + if (BETWEEN(p, OMAP34XX_GPMC_PHYS, OMAP34XX_GPMC_SIZE)) + return XLATE(p, OMAP34XX_GPMC_PHYS, OMAP34XX_GPMC_VIRT); + if (BETWEEN(p, OMAP343X_SMS_PHYS, OMAP343X_SMS_SIZE)) + return XLATE(p, OMAP343X_SMS_PHYS, OMAP343X_SMS_VIRT); + if (BETWEEN(p, OMAP343X_SDRC_PHYS, OMAP343X_SDRC_SIZE)) + return XLATE(p, OMAP343X_SDRC_PHYS, OMAP343X_SDRC_VIRT); + if (BETWEEN(p, L4_PER_34XX_PHYS, L4_PER_34XX_SIZE)) + return XLATE(p, L4_PER_34XX_PHYS, L4_PER_34XX_VIRT); + if (BETWEEN(p, L4_EMU_34XX_PHYS, L4_EMU_34XX_SIZE)) + return XLATE(p, L4_EMU_34XX_PHYS, L4_EMU_34XX_VIRT); + } #endif return __arm_ioremap(p, size, type); diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c index ac67eeb6ca6..4d22452a074 100644 --- a/arch/arm/plat-omap/sram.c +++ b/arch/arm/plat-omap/sram.c @@ -271,7 +271,7 @@ int __init omap1_sram_init(void) #define omap1_sram_init() do {} while (0) #endif -#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) +#if defined(CONFIG_ARCH_OMAP2) static void (*_omap2_sram_ddr_init)(u32 *slow_dll_ctrl, u32 fast_dll_ctrl, u32 base_cs, u32 force_unlock); @@ -352,23 +352,19 @@ static inline int omap243x_sram_init(void) #ifdef CONFIG_ARCH_OMAP3 -static u32 (*_omap2_sram_reprogram_gpmc)(u32 perf_level); -u32 omap2_sram_reprogram_gpmc(u32 perf_level) -{ - if (!_omap2_sram_reprogram_gpmc) - omap_sram_error(); - - return _omap2_sram_reprogram_gpmc(perf_level); -} - -static u32 (*_omap2_sram_configure_core_dpll)(u32 m, u32 n, - u32 freqsel, u32 m2); -u32 omap2_sram_configure_core_dpll(u32 m, u32 n, u32 freqsel, u32 m2) +static u32 (*_omap3_sram_configure_core_dpll)(u32 sdrc_rfr_ctrl, + u32 sdrc_actim_ctrla, + u32 sdrc_actim_ctrlb, + u32 m2); +u32 omap3_configure_core_dpll(u32 sdrc_rfr_ctrl, u32 sdrc_actim_ctrla, + u32 sdrc_actim_ctrlb, u32 m2) { - if (!_omap2_sram_configure_core_dpll) + if (!_omap3_sram_configure_core_dpll) omap_sram_error(); - return _omap2_sram_configure_core_dpll(m, n, freqsel, m2); + return _omap3_sram_configure_core_dpll(sdrc_rfr_ctrl, + sdrc_actim_ctrla, + sdrc_actim_ctrlb, m2); } /* REVISIT: Should this be same as omap34xx_sram_init() after off-idle? */ @@ -376,31 +372,16 @@ void restore_sram_functions(void) { omap_sram_ceil = omap_sram_base + omap_sram_size; - _omap2_sram_reprogram_gpmc = omap_sram_push(omap34xx_sram_reprogram_gpmc, - omap34xx_sram_reprogram_gpmc_sz); - - _omap2_sram_configure_core_dpll = - omap_sram_push(omap34xx_sram_configure_core_dpll, - omap34xx_sram_configure_core_dpll_sz); + _omap3_sram_configure_core_dpll = + omap_sram_push(omap3_sram_configure_core_dpll, + omap3_sram_configure_core_dpll_sz); } int __init omap34xx_sram_init(void) { - _omap2_sram_ddr_init = omap_sram_push(omap34xx_sram_ddr_init, - omap34xx_sram_ddr_init_sz); - - _omap2_sram_reprogram_sdrc = omap_sram_push(omap34xx_sram_reprogram_sdrc, - omap34xx_sram_reprogram_sdrc_sz); - - _omap2_set_prcm = omap_sram_push(omap34xx_sram_set_prcm, - omap34xx_sram_set_prcm_sz); - - _omap2_sram_reprogram_gpmc = omap_sram_push(omap34xx_sram_reprogram_gpmc, - omap34xx_sram_reprogram_gpmc_sz); - - _omap2_sram_configure_core_dpll = - omap_sram_push(omap34xx_sram_configure_core_dpll, - omap34xx_sram_configure_core_dpll_sz); + _omap3_sram_configure_core_dpll = + omap_sram_push(omap3_sram_configure_core_dpll, + omap3_sram_configure_core_dpll_sz); return 0; } -- cgit v1.2.3-70-g09d2 From 2885f00049f80287b14192145699774fa55c14f7 Mon Sep 17 00:00:00 2001 From: "Syed Mohammed, Khasim" Date: Thu, 9 Oct 2008 17:51:42 +0300 Subject: ARM: OMAP3: Add minimal Beagle board support Add minimal Beagle board support. Based on earlier patches by Syed Mohammed Khasim with some fixes from linux-omap tree. Signed-off-by: Syed Mohammed Khasim Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/Kconfig | 4 + arch/arm/mach-omap2/Makefile | 1 + arch/arm/mach-omap2/board-omap3beagle.c | 244 +++++++++++++++++++++ arch/arm/mm/Kconfig | 2 +- .../arm/plat-omap/include/mach/board-omap3beagle.h | 33 +++ arch/arm/plat-omap/include/mach/hardware.h | 4 + 6 files changed, 287 insertions(+), 1 deletion(-) create mode 100644 arch/arm/mach-omap2/board-omap3beagle.c create mode 100644 arch/arm/plat-omap/include/mach/board-omap3beagle.h (limited to 'arch') diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index e2481e4045e..23fd1cc034a 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -44,3 +44,7 @@ config MACH_OMAP_2430SDP bool "OMAP 2430 SDP board" depends on ARCH_OMAP2 && ARCH_OMAP24XX +config MACH_OMAP3_BEAGLE + bool "OMAP3 BEAGLE board" + depends on ARCH_OMAP3 && ARCH_OMAP34XX + diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index 0dc40db3811..420ad9acceb 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -29,4 +29,5 @@ obj-$(CONFIG_MACH_OMAP_GENERIC) += board-generic.o obj-$(CONFIG_MACH_OMAP_H4) += board-h4.o obj-$(CONFIG_MACH_OMAP_2430SDP) += board-2430sdp.o obj-$(CONFIG_MACH_OMAP_APOLLON) += board-apollon.o +obj-$(CONFIG_MACH_OMAP3_BEAGLE) += board-omap3beagle.o diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c new file mode 100644 index 00000000000..baa79674e9d --- /dev/null +++ b/arch/arm/mach-omap2/board-omap3beagle.c @@ -0,0 +1,244 @@ +/* + * linux/arch/arm/mach-omap2/board-omap3beagle.c + * + * Copyright (C) 2008 Texas Instruments + * + * Modified from mach-omap2/board-3430sdp.c + * + * Initial code: Syed Mohammed Khasim + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#include +#include +#include +#include +#include + +#include +#include +#include +#include + + +#define GPMC_CS0_BASE 0x60 +#define GPMC_CS_SIZE 0x30 + +#define NAND_BLOCK_SIZE SZ_128K + +static struct mtd_partition omap3beagle_nand_partitions[] = { + /* All the partition sizes are listed in terms of NAND block size */ + { + .name = "X-Loader", + .offset = 0, + .size = 4 * NAND_BLOCK_SIZE, + .mask_flags = MTD_WRITEABLE, /* force read-only */ + }, + { + .name = "U-Boot", + .offset = MTDPART_OFS_APPEND, /* Offset = 0x80000 */ + .size = 15 * NAND_BLOCK_SIZE, + .mask_flags = MTD_WRITEABLE, /* force read-only */ + }, + { + .name = "U-Boot Env", + .offset = MTDPART_OFS_APPEND, /* Offset = 0x260000 */ + .size = 1 * NAND_BLOCK_SIZE, + }, + { + .name = "Kernel", + .offset = MTDPART_OFS_APPEND, /* Offset = 0x280000 */ + .size = 32 * NAND_BLOCK_SIZE, + }, + { + .name = "File System", + .offset = MTDPART_OFS_APPEND, /* Offset = 0x680000 */ + .size = MTDPART_SIZ_FULL, + }, +}; + +static struct omap_nand_platform_data omap3beagle_nand_data = { + .options = NAND_BUSWIDTH_16, + .parts = omap3beagle_nand_partitions, + .nr_parts = ARRAY_SIZE(omap3beagle_nand_partitions), + .dma_channel = -1, /* disable DMA in OMAP NAND driver */ + .nand_setup = NULL, + .dev_ready = NULL, +}; + +static struct resource omap3beagle_nand_resource = { + .flags = IORESOURCE_MEM, +}; + +static struct platform_device omap3beagle_nand_device = { + .name = "omap2-nand", + .id = -1, + .dev = { + .platform_data = &omap3beagle_nand_data, + }, + .num_resources = 1, + .resource = &omap3beagle_nand_resource, +}; + +static struct omap_uart_config omap3_beagle_uart_config __initdata = { + .enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)), +}; + +static void __init omap3_beagle_init_irq(void) +{ + omap2_init_common_hw(); + omap_init_irq(); + omap_gpio_init(); +} + +static struct platform_device omap3_beagle_lcd_device = { + .name = "omap3beagle_lcd", + .id = -1, +}; + +static struct omap_lcd_config omap3_beagle_lcd_config __initdata = { + .ctrl_name = "internal", +}; + +static struct gpio_led gpio_leds[] = { + { + .name = "beagleboard::usr0", + .default_trigger = "heartbeat", + .gpio = 150, + }, + { + .name = "beagleboard::usr1", + .default_trigger = "mmc0", + .gpio = 149, + }, +}; + +static struct gpio_led_platform_data gpio_led_info = { + .leds = gpio_leds, + .num_leds = ARRAY_SIZE(gpio_leds), +}; + +static struct platform_device leds_gpio = { + .name = "leds-gpio", + .id = -1, + .dev = { + .platform_data = &gpio_led_info, + }, +}; + +static struct gpio_keys_button gpio_buttons[] = { + { + .code = BTN_EXTRA, + .gpio = 7, + .desc = "user", + .wakeup = 1, + }, +}; + +static struct gpio_keys_platform_data gpio_key_info = { + .buttons = gpio_buttons, + .nbuttons = ARRAY_SIZE(gpio_buttons), +}; + +static struct platform_device keys_gpio = { + .name = "gpio-keys", + .id = -1, + .dev = { + .platform_data = &gpio_key_info, + }, +}; + +static struct omap_board_config_kernel omap3_beagle_config[] __initdata = { + { OMAP_TAG_UART, &omap3_beagle_uart_config }, + { OMAP_TAG_LCD, &omap3_beagle_lcd_config }, +}; + +static struct platform_device *omap3_beagle_devices[] __initdata = { + &omap3_beagle_lcd_device, + &leds_gpio, + &keys_gpio, +}; + +static void __init omap3beagle_flash_init(void) +{ + u8 cs = 0; + u8 nandcs = GPMC_CS_NUM + 1; + + u32 gpmc_base_add = OMAP34XX_GPMC_VIRT; + + /* find out the chip-select on which NAND exists */ + while (cs < GPMC_CS_NUM) { + u32 ret = 0; + ret = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG1); + + if ((ret & 0xC00) == 0x800) { + printk(KERN_INFO "Found NAND on CS%d\n", cs); + if (nandcs > GPMC_CS_NUM) + nandcs = cs; + } + cs++; + } + + if (nandcs > GPMC_CS_NUM) { + printk(KERN_INFO "NAND: Unable to find configuration " + "in GPMC\n "); + return; + } + + if (nandcs < GPMC_CS_NUM) { + omap3beagle_nand_data.cs = nandcs; + omap3beagle_nand_data.gpmc_cs_baseaddr = (void *) + (gpmc_base_add + GPMC_CS0_BASE + nandcs * GPMC_CS_SIZE); + omap3beagle_nand_data.gpmc_baseaddr = (void *) (gpmc_base_add); + + printk(KERN_INFO "Registering NAND on CS%d\n", nandcs); + if (platform_device_register(&omap3beagle_nand_device) < 0) + printk(KERN_ERR "Unable to register NAND device\n"); + } +} + +static void __init omap3_beagle_init(void) +{ + platform_add_devices(omap3_beagle_devices, + ARRAY_SIZE(omap3_beagle_devices)); + omap_board_config = omap3_beagle_config; + omap_board_config_size = ARRAY_SIZE(omap3_beagle_config); + omap_serial_init(); + omap3beagle_flash_init(); +} + +static void __init omap3_beagle_map_io(void) +{ + omap2_set_globals_343x(); + omap2_map_common_io(); +} + +MACHINE_START(OMAP3_BEAGLE, "OMAP3 Beagle Board") + /* Maintainer: Syed Mohammed Khasim - http://beagleboard.org */ + .phys_io = 0x48000000, + .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc, + .boot_params = 0x80000100, + .map_io = omap3_beagle_map_io, + .init_irq = omap3_beagle_init_irq, + .init_machine = omap3_beagle_init, + .timer = &omap_timer, +MACHINE_END diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig index ed15f876c72..546d7e7db74 100644 --- a/arch/arm/mm/Kconfig +++ b/arch/arm/mm/Kconfig @@ -428,7 +428,7 @@ config CPU_32v6K # ARMv7 config CPU_V7 bool "Support ARM V7 processor" - depends on ARCH_INTEGRATOR || MACH_REALVIEW_EB + depends on ARCH_INTEGRATOR || MACH_REALVIEW_EB || ARCH_OMAP3 select CPU_32v6K select CPU_32v7 select CPU_ABRT_EV7 diff --git a/arch/arm/plat-omap/include/mach/board-omap3beagle.h b/arch/arm/plat-omap/include/mach/board-omap3beagle.h new file mode 100644 index 00000000000..3080d52d877 --- /dev/null +++ b/arch/arm/plat-omap/include/mach/board-omap3beagle.h @@ -0,0 +1,33 @@ +/* + * arch/arm/plat-omap/include/mach/board-omap3beagle.h + * + * Hardware definitions for TI OMAP3 BEAGLE. + * + * Initial creation by Syed Mohammed Khasim + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef __ASM_ARCH_OMAP3_BEAGLE_H +#define __ASM_ARCH_OMAP3_BEAGLE_H + +#endif /* __ASM_ARCH_OMAP3_BEAGLE_H */ + diff --git a/arch/arm/plat-omap/include/mach/hardware.h b/arch/arm/plat-omap/include/mach/hardware.h index 29c849f5f18..80f6d7ec53e 100644 --- a/arch/arm/plat-omap/include/mach/hardware.h +++ b/arch/arm/plat-omap/include/mach/hardware.h @@ -322,6 +322,10 @@ #include "board-2430sdp.h" #endif +#ifdef CONFIG_MACH_OMAP3_BEAGLE +#include "board-omap3beagle.h" +#endif + #ifdef CONFIG_MACH_OMAP_APOLLON #include "board-apollon.h" #endif -- cgit v1.2.3-70-g09d2 From 22b401bfa9a02650362aa376ae73fd3db7546d3c Mon Sep 17 00:00:00 2001 From: "Syed Mohammed, Khasim" Date: Thu, 9 Oct 2008 17:51:42 +0300 Subject: ARM: OMAP3: Add Beagle defconfig Add Beagle defconfig Signed-off-by: Syed Mohammed, Khasim Signed-off-by: Tony Lindgren --- arch/arm/configs/omap3_beagle_defconfig | 1321 +++++++++++++++++++++++++++++++ 1 file changed, 1321 insertions(+) create mode 100644 arch/arm/configs/omap3_beagle_defconfig (limited to 'arch') diff --git a/arch/arm/configs/omap3_beagle_defconfig b/arch/arm/configs/omap3_beagle_defconfig new file mode 100644 index 00000000000..e042d27eae1 --- /dev/null +++ b/arch/arm/configs/omap3_beagle_defconfig @@ -0,0 +1,1321 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.27-rc8 +# Wed Oct 1 17:14:22 2008 +# +CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_MMU=y +# CONFIG_NO_IOPORT is not set +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_ARCH_SUPPORTS_AOUT=y +CONFIG_ZONE_DMA=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set +CONFIG_BSD_PROCESS_ACCT=y +# CONFIG_BSD_PROCESS_ACCT_V3 is not set +# CONFIG_TASKSTATS is not set +# CONFIG_AUDIT is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +CONFIG_GROUP_SCHED=y +CONFIG_FAIR_GROUP_SCHED=y +# CONFIG_RT_GROUP_SCHED is not set +CONFIG_USER_SCHED=y +# CONFIG_CGROUP_SCHED is not set +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y +# CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +CONFIG_UID16=y +# CONFIG_SYSCTL_SYSCALL is not set +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +CONFIG_KALLSYMS_EXTRA_PASS=y +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_COMPAT_BRK=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set +# CONFIG_HAVE_IOREMAP_PROT is not set +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +# CONFIG_HAVE_ARCH_TRACEHOOK is not set +# CONFIG_HAVE_DMA_ATTRS is not set +# CONFIG_USE_GENERIC_SMP_HELPERS is not set +CONFIG_HAVE_CLK=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +CONFIG_MODVERSIONS=y +CONFIG_MODULE_SRCVERSION_ALL=y +CONFIG_KMOD=y +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_CLASSIC_RCU=y + +# +# System Type +# +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_CLPS7500 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KIRKWOOD is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_LOKI is not set +# CONFIG_ARCH_MV78XX0 is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_ORION5X is not set +# CONFIG_ARCH_PNX4008 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_DAVINCI is not set +CONFIG_ARCH_OMAP=y +# CONFIG_ARCH_MSM7X00A is not set + +# +# TI OMAP Implementations +# +CONFIG_ARCH_OMAP_OTG=y +# CONFIG_ARCH_OMAP1 is not set +# CONFIG_ARCH_OMAP2 is not set +CONFIG_ARCH_OMAP3=y + +# +# OMAP Feature Selections +# +# CONFIG_OMAP_DEBUG_POWERDOMAIN is not set +# CONFIG_OMAP_DEBUG_CLOCKDOMAIN is not set +# CONFIG_OMAP_RESET_CLOCKS is not set +# CONFIG_OMAP_MUX is not set +# CONFIG_OMAP_MCBSP is not set +# CONFIG_OMAP_MPU_TIMER is not set +CONFIG_OMAP_32K_TIMER=y +CONFIG_OMAP_32K_TIMER_HZ=128 +CONFIG_OMAP_DM_TIMER=y +# CONFIG_OMAP_LL_DEBUG_UART1 is not set +# CONFIG_OMAP_LL_DEBUG_UART2 is not set +CONFIG_OMAP_LL_DEBUG_UART3=y +CONFIG_ARCH_OMAP34XX=y +CONFIG_ARCH_OMAP3430=y + +# +# OMAP Board Type +# +CONFIG_MACH_OMAP3_BEAGLE=y + +# +# Boot options +# + +# +# Power management +# + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_32v6K=y +CONFIG_CPU_V7=y +CONFIG_CPU_32v7=y +CONFIG_CPU_ABRT_EV7=y +CONFIG_CPU_PABRT_IFAR=y +CONFIG_CPU_CACHE_V7=y +CONFIG_CPU_CACHE_VIPT=y +CONFIG_CPU_COPY_V6=y +CONFIG_CPU_TLB_V7=y +CONFIG_CPU_HAS_ASID=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +CONFIG_ARM_THUMB=y +# CONFIG_ARM_THUMBEE is not set +# CONFIG_CPU_ICACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_CPU_BPREDICT_DISABLE is not set +CONFIG_HAS_TLS_REG=y +# CONFIG_OUTER_CACHE is not set + +# +# Bus support +# +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +CONFIG_TICK_ONESHOT=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_VMSPLIT_3G=y +# CONFIG_VMSPLIT_2G is not set +# CONFIG_VMSPLIT_1G is not set +CONFIG_PAGE_OFFSET=0xC0000000 +# CONFIG_PREEMPT is not set +CONFIG_HZ=128 +CONFIG_AEABI=y +CONFIG_OABI_COMPAT=y +CONFIG_ARCH_FLATMEM_HAS_HOLES=y +# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y +# CONFIG_LEDS is not set +CONFIG_ALIGNMENT_TRAP=y + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="root=/dev/nfs nfsroot=192.168.0.1:/home/user/buildroot ip=192.168.0.2:192.168.0.1:192.168.0.1:255.255.255.0:tgt:eth0:off rw console=ttyS2,115200n8" +# CONFIG_XIP_KERNEL is not set +# CONFIG_KEXEC is not set + +# +# CPU Power Management +# +# CONFIG_CPU_FREQ is not set +# CONFIG_CPU_IDLE is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +CONFIG_FPE_NWFPE=y +# CONFIG_FPE_NWFPE_XP is not set +# CONFIG_FPE_FASTFPE is not set +CONFIG_VFP=y +CONFIG_VFPv3=y +# CONFIG_NEON is not set + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_AOUT is not set +CONFIG_BINFMT_MISC=y + +# +# Power management options +# +# CONFIG_PM is not set +CONFIG_ARCH_SUSPEND_POSSIBLE=y +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set +CONFIG_NET_KEY=y +# CONFIG_NET_KEY_MIGRATE is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +CONFIG_IP_PNP_RARP=y +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_LRO is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set +# CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +# CONFIG_MTD_CMDLINE_PARTS is not set +# CONFIG_MTD_AFS_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +# CONFIG_MTD_CFI is not set +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +CONFIG_MTD_NAND=y +# CONFIG_MTD_NAND_VERIFY_WRITE is not set +# CONFIG_MTD_NAND_ECC_SMC is not set +# CONFIG_MTD_NAND_MUSEUM_IDS is not set +CONFIG_MTD_NAND_IDS=y +# CONFIG_MTD_NAND_DISKONCHIP is not set +# CONFIG_MTD_NAND_NANDSIM is not set +# CONFIG_MTD_NAND_PLATFORM is not set +# CONFIG_MTD_ALAUDA is not set +# CONFIG_MTD_ONENAND is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_UB is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=16384 +# CONFIG_BLK_DEV_XIP is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +# CONFIG_MISC_DEVICES is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +# CONFIG_CHR_DEV_SG is not set +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set +CONFIG_SCSI_LOWLEVEL=y +# CONFIG_ISCSI_TCP is not set +# CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_DH is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_VETH is not set +# CONFIG_NET_ETHERNET is not set +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET is not set +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +CONFIG_DEVKMEM=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_NR_UARTS=32 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 +CONFIG_SERIAL_8250_EXTENDED=y +CONFIG_SERIAL_8250_MANY_PORTS=y +CONFIG_SERIAL_8250_SHARE_IRQ=y +CONFIG_SERIAL_8250_DETECT_IRQ=y +CONFIG_SERIAL_8250_RSA=y + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +# CONFIG_LEGACY_PTYS is not set +# CONFIG_IPMI_HANDLER is not set +CONFIG_HW_RANDOM=y +# CONFIG_NVRAM is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_CHARDEV=y +CONFIG_I2C_HELPER_AUTO=y + +# +# I2C Hardware Bus support +# + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +# CONFIG_I2C_GPIO is not set +# CONFIG_I2C_OCORES is not set +CONFIG_I2C_OMAP=y +# CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_TINY_USB is not set + +# +# Other I2C/SMBus bus drivers +# +# CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_STUB is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_DS1682 is not set +# CONFIG_AT24 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_PCF8575 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_ISP1301_OMAP is not set +# CONFIG_TPS65010 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set +# CONFIG_SPI is not set +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_GPIOLIB=y +# CONFIG_DEBUG_GPIO is not set +# CONFIG_GPIO_SYSFS is not set + +# +# I2C GPIO expanders: +# +# CONFIG_GPIO_MAX732X is not set +# CONFIG_GPIO_PCA953X is not set +# CONFIG_GPIO_PCF857X is not set + +# +# PCI GPIO expanders: +# + +# +# SPI GPIO expanders: +# +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set +# CONFIG_WATCHDOG is not set + +# +# Sonics Silicon Backplane +# +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_HTC_EGPIO is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_UCB1400_CORE is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_T7L66XB is not set +# CONFIG_MFD_TC6387XB is not set +# CONFIG_MFD_TC6393XB is not set + +# +# Multimedia devices +# + +# +# Multimedia core support +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# +CONFIG_DAB=y +# CONFIG_USB_DABUSB is not set + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +# CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +# CONFIG_SOUND is not set +# CONFIG_HID_SUPPORT is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +# CONFIG_USB_ARCH_HAS_EHCI is not set +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set +# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set + +# +# Miscellaneous USB options +# +CONFIG_USB_DEVICEFS=y +CONFIG_USB_DEVICE_CLASS=y +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_OTG is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set +CONFIG_USB_MON=y + +# +# USB Host Controller Drivers +# +# CONFIG_USB_C67X00_HCD is not set +# CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set +# CONFIG_USB_OHCI_HCD is not set +# CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set +CONFIG_USB_MUSB_HDRC=y +CONFIG_USB_MUSB_SOC=y + +# +# OMAP 343x high speed USB support +# +CONFIG_USB_MUSB_HOST=y +# CONFIG_USB_MUSB_PERIPHERAL is not set +# CONFIG_USB_MUSB_OTG is not set +# CONFIG_USB_GADGET_MUSB_HDRC is not set +CONFIG_USB_MUSB_HDRC_HCD=y +# CONFIG_MUSB_PIO_ONLY is not set +CONFIG_USB_INVENTRA_DMA=y +# CONFIG_USB_TI_CPPI_DMA is not set +# CONFIG_USB_MUSB_DEBUG is not set + +# +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set +# CONFIG_USB_WDM is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# may also be needed; see USB_STORAGE Help for more information +# +# CONFIG_USB_STORAGE is not set +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set + +# +# USB port drivers +# +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_PHIDGET is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_TEST is not set +# CONFIG_USB_ISIGHTFW is not set +CONFIG_USB_GADGET=y +# CONFIG_USB_GADGET_DEBUG is not set +# CONFIG_USB_GADGET_DEBUG_FILES is not set +CONFIG_USB_GADGET_SELECTED=y +# CONFIG_USB_GADGET_AMD5536UDC is not set +# CONFIG_USB_GADGET_ATMEL_USBA is not set +# CONFIG_USB_GADGET_FSL_USB2 is not set +# CONFIG_USB_GADGET_NET2280 is not set +# CONFIG_USB_GADGET_PXA25X is not set +CONFIG_USB_GADGET_M66592=y +CONFIG_USB_M66592=y +# CONFIG_USB_GADGET_PXA27X is not set +# CONFIG_USB_GADGET_GOKU is not set +# CONFIG_USB_GADGET_LH7A40X is not set +# CONFIG_USB_GADGET_OMAP is not set +# CONFIG_USB_GADGET_S3C2410 is not set +# CONFIG_USB_GADGET_AT91 is not set +# CONFIG_USB_GADGET_DUMMY_HCD is not set +CONFIG_USB_GADGET_DUALSPEED=y +# CONFIG_USB_ZERO is not set +CONFIG_USB_ETH=m +CONFIG_USB_ETH_RNDIS=y +# CONFIG_USB_GADGETFS is not set +# CONFIG_USB_FILE_STORAGE is not set +# CONFIG_USB_G_SERIAL is not set +# CONFIG_USB_MIDI_GADGET is not set +# CONFIG_USB_G_PRINTER is not set +# CONFIG_USB_CDC_COMPOSITE is not set +CONFIG_MMC=y +# CONFIG_MMC_DEBUG is not set +# CONFIG_MMC_UNSAFE_RESUME is not set + +# +# MMC/SD Card Drivers +# +CONFIG_MMC_BLOCK=y +CONFIG_MMC_BLOCK_BOUNCE=y +# CONFIG_SDIO_UART is not set +# CONFIG_MMC_TEST is not set + +# +# MMC/SD Host Controller Drivers +# +# CONFIG_MMC_SDHCI is not set +# CONFIG_MMC_OMAP is not set +# CONFIG_MEMSTICK is not set +# CONFIG_ACCESSIBILITY is not set +# CONFIG_NEW_LEDS is not set +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# I2C RTC drivers +# +# CONFIG_RTC_DRV_DS1307 is not set +# CONFIG_RTC_DRV_DS1374 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_MAX6900 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_X1205 is not set +# CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_PCF8583 is not set +# CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_S35390A is not set +# CONFIG_RTC_DRV_FM3130 is not set + +# +# SPI RTC drivers +# + +# +# Platform RTC drivers +# +# CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1511 is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# on-CPU RTC drivers +# +# CONFIG_DMADEVICES is not set + +# +# Voltage and Current regulators +# +# CONFIG_REGULATOR is not set +# CONFIG_REGULATOR_FIXED_VOLTAGE is not set +# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set +# CONFIG_REGULATOR_BQ24022 is not set +# CONFIG_UIO is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +# CONFIG_EXT3_FS_XATTR is not set +# CONFIG_EXT4DEV_FS is not set +CONFIG_JBD=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_OCFS2_FS is not set +CONFIG_DNOTIFY=y +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +CONFIG_QUOTA=y +# CONFIG_QUOTA_NETLINK_INTERFACE is not set +CONFIG_PRINT_QUOTA_WARNING=y +# CONFIG_QFMT_V1 is not set +CONFIG_QFMT_V2=y +CONFIG_QUOTACTL=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set +# CONFIG_JFFS2_SUMMARY is not set +# CONFIG_JFFS2_FS_XATTR is not set +# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set +CONFIG_JFFS2_ZLIB=y +# CONFIG_JFFS2_LZO is not set +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +CONFIG_NFS_V4=y +CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +CONFIG_SUNRPC_GSS=y +CONFIG_RPCSEC_GSS_KRB5=y +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_BSD_DISKLABEL is not set +# CONFIG_MINIX_SUBPARTITION is not set +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set +# CONFIG_EFI_PARTITION is not set +# CONFIG_SYSV68_PARTITION is not set +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +CONFIG_NLS_ISO8859_1=y +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set +# CONFIG_DLM is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 +CONFIG_MAGIC_SYSRQ=y +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_SCHED_DEBUG=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +CONFIG_DEBUG_MUTEXES=y +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_DEBUG_INFO=y +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +CONFIG_FRAME_POINTER=y +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +CONFIG_HAVE_FTRACE=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +# CONFIG_FTRACE is not set +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set +# CONFIG_DEBUG_USER is not set +# CONFIG_DEBUG_ERRORS is not set +# CONFIG_DEBUG_STACK_USAGE is not set +# CONFIG_DEBUG_LL is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_MANAGER=y +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +CONFIG_CRYPTO_ECB=m +# CONFIG_CRYPTO_LRW is not set +CONFIG_CRYPTO_PCBC=m +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_MD4 is not set +CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_LZO is not set +CONFIG_CRYPTO_HW=y + +# +# Library routines +# +CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set +# CONFIG_GENERIC_FIND_NEXT_BIT is not set +CONFIG_CRC_CCITT=y +# CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +CONFIG_LIBCRC32C=y +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y -- cgit v1.2.3-70-g09d2 From eba2645aeb41d430c4601f6624c44bc971488fe2 Mon Sep 17 00:00:00 2001 From: Steve Sakoman Date: Thu, 9 Oct 2008 17:51:43 +0300 Subject: ARM: OMAP3: Add support for the Gumstix Overo board (rev 3) This patch adds minimal overo support. Signed-off-by: Steve Sakoman Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/Kconfig | 3 + arch/arm/mach-omap2/Makefile | 1 + arch/arm/mach-omap2/board-overo.c | 242 ++++++++++++++++++++++++++ arch/arm/plat-omap/include/mach/board-overo.h | 26 +++ 4 files changed, 272 insertions(+) create mode 100644 arch/arm/mach-omap2/board-overo.c create mode 100644 arch/arm/plat-omap/include/mach/board-overo.h (limited to 'arch') diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index 23fd1cc034a..aef043b87b4 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -48,3 +48,6 @@ config MACH_OMAP3_BEAGLE bool "OMAP3 BEAGLE board" depends on ARCH_OMAP3 && ARCH_OMAP34XX +config MACH_OVERO + bool "Gumstix Overo board" + depends on ARCH_OMAP3 && ARCH_OMAP34XX diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index 420ad9acceb..feb9caf771d 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -30,4 +30,5 @@ obj-$(CONFIG_MACH_OMAP_H4) += board-h4.o obj-$(CONFIG_MACH_OMAP_2430SDP) += board-2430sdp.o obj-$(CONFIG_MACH_OMAP_APOLLON) += board-apollon.o obj-$(CONFIG_MACH_OMAP3_BEAGLE) += board-omap3beagle.o +obj-$(CONFIG_MACH_OVERO) += board-overo.o diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c new file mode 100644 index 00000000000..e09aa59a399 --- /dev/null +++ b/arch/arm/mach-omap2/board-overo.c @@ -0,0 +1,242 @@ +/* + * board-overo.c (Gumstix Overo) + * + * Initial code: Steve Sakoman + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + */ + +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include + +#define NAND_BLOCK_SIZE SZ_128K +#define GPMC_CS0_BASE 0x60 +#define GPMC_CS_SIZE 0x30 + +static struct mtd_partition overo_nand_partitions[] = { + { + .name = "xloader", + .offset = 0, /* Offset = 0x00000 */ + .size = 4 * NAND_BLOCK_SIZE, + .mask_flags = MTD_WRITEABLE + }, + { + .name = "uboot", + .offset = MTDPART_OFS_APPEND, /* Offset = 0x80000 */ + .size = 14 * NAND_BLOCK_SIZE, + }, + { + .name = "uboot environment", + .offset = MTDPART_OFS_APPEND, /* Offset = 0x240000 */ + .size = 2 * NAND_BLOCK_SIZE, + }, + { + .name = "linux", + .offset = MTDPART_OFS_APPEND, /* Offset = 0x280000 */ + .size = 32 * NAND_BLOCK_SIZE, + }, + { + .name = "rootfs", + .offset = MTDPART_OFS_APPEND, /* Offset = 0x680000 */ + .size = MTDPART_SIZ_FULL, + }, +}; + +static struct omap_nand_platform_data overo_nand_data = { + .parts = overo_nand_partitions, + .nr_parts = ARRAY_SIZE(overo_nand_partitions), + .dma_channel = -1, /* disable DMA in OMAP NAND driver */ +}; + +static struct resource overo_nand_resource = { + .flags = IORESOURCE_MEM, +}; + +static struct platform_device overo_nand_device = { + .name = "omap2-nand", + .id = -1, + .dev = { + .platform_data = &overo_nand_data, + }, + .num_resources = 1, + .resource = &overo_nand_resource, +}; + + +static void __init overo_flash_init(void) +{ + u8 cs = 0; + u8 nandcs = GPMC_CS_NUM + 1; + + u32 gpmc_base_add = OMAP34XX_GPMC_VIRT; + + /* find out the chip-select on which NAND exists */ + while (cs < GPMC_CS_NUM) { + u32 ret = 0; + ret = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG1); + + if ((ret & 0xC00) == 0x800) { + printk(KERN_INFO "Found NAND on CS%d\n", cs); + if (nandcs > GPMC_CS_NUM) + nandcs = cs; + } + cs++; + } + + if (nandcs > GPMC_CS_NUM) { + printk(KERN_INFO "NAND: Unable to find configuration " + "in GPMC\n "); + return; + } + + if (nandcs < GPMC_CS_NUM) { + overo_nand_data.cs = nandcs; + overo_nand_data.gpmc_cs_baseaddr = (void *) + (gpmc_base_add + GPMC_CS0_BASE + nandcs * GPMC_CS_SIZE); + overo_nand_data.gpmc_baseaddr = (void *) (gpmc_base_add); + + printk(KERN_INFO "Registering NAND on CS%d\n", nandcs); + if (platform_device_register(&overo_nand_device) < 0) + printk(KERN_ERR "Unable to register NAND device\n"); + } +} +static struct omap_uart_config overo_uart_config __initdata = { + .enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)), +}; + +static int __init overo_i2c_init(void) +{ + /* i2c2 pins are used for gpio */ + omap_register_i2c_bus(3, 400, NULL, 0); + return 0; +} + +static void __init overo_init_irq(void) +{ + omap2_init_common_hw(); + omap_init_irq(); + omap_gpio_init(); +} + +static struct platform_device overo_lcd_device = { + .name = "overo_lcd", + .id = -1, +}; + +static struct omap_lcd_config overo_lcd_config __initdata = { + .ctrl_name = "internal", +}; + +static struct omap_board_config_kernel overo_config[] __initdata = { + { OMAP_TAG_UART, &overo_uart_config }, + { OMAP_TAG_LCD, &overo_lcd_config }, +}; + +static struct platform_device *overo_devices[] __initdata = { + &overo_lcd_device, +}; + +static void __init overo_init(void) +{ + overo_i2c_init(); + platform_add_devices(overo_devices, ARRAY_SIZE(overo_devices)); + omap_board_config = overo_config; + omap_board_config_size = ARRAY_SIZE(overo_config); + omap_serial_init(); + overo_flash_init(); + + if ((gpio_request(OVERO_GPIO_W2W_NRESET, + "OVERO_GPIO_W2W_NRESET") == 0) && + (gpio_direction_output(OVERO_GPIO_W2W_NRESET, 1) == 0)) { + gpio_export(OVERO_GPIO_W2W_NRESET, 0); + gpio_set_value(OVERO_GPIO_W2W_NRESET, 0); + udelay(10); + gpio_set_value(OVERO_GPIO_W2W_NRESET, 1); + } else { + printk(KERN_ERR "could not obtain gpio for " + "OVERO_GPIO_W2W_NRESET\n"); + } + + if ((gpio_request(OVERO_GPIO_BT_XGATE, "OVERO_GPIO_BT_XGATE") == 0) && + (gpio_direction_output(OVERO_GPIO_BT_XGATE, 0) == 0)) + gpio_export(OVERO_GPIO_BT_XGATE, 0); + else + printk(KERN_ERR "could not obtain gpio for OVERO_GPIO_BT_XGATE\n"); + + if ((gpio_request(OVERO_GPIO_BT_NRESET, "OVERO_GPIO_BT_NRESET") == 0) && + (gpio_direction_output(OVERO_GPIO_BT_NRESET, 1) == 0)) { + gpio_export(OVERO_GPIO_BT_NRESET, 0); + gpio_set_value(OVERO_GPIO_BT_NRESET, 0); + mdelay(6); + gpio_set_value(OVERO_GPIO_BT_NRESET, 1); + } else { + printk(KERN_ERR "could not obtain gpio for " + "OVERO_GPIO_BT_NRESET\n"); + } + + if ((gpio_request(OVERO_GPIO_USBH_CPEN, "OVERO_GPIO_USBH_CPEN") == 0) && + (gpio_direction_output(OVERO_GPIO_USBH_CPEN, 1) == 0)) + gpio_export(OVERO_GPIO_USBH_CPEN, 0); + else + printk(KERN_ERR "could not obtain gpio for " + "OVERO_GPIO_USBH_CPEN\n"); + + if ((gpio_request(OVERO_GPIO_USBH_NRESET, + "OVERO_GPIO_USBH_NRESET") == 0) && + (gpio_direction_output(OVERO_GPIO_USBH_NRESET, 1) == 0)) + gpio_export(OVERO_GPIO_USBH_NRESET, 0); + else + printk(KERN_ERR "could not obtain gpio for " + "OVERO_GPIO_USBH_NRESET\n"); +} + +static void __init overo_map_io(void) +{ + omap2_set_globals_343x(); + omap2_map_common_io(); +} + +MACHINE_START(OVERO, "Gumstix Overo") + .phys_io = 0x48000000, + .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc, + .boot_params = 0x80000100, + .map_io = overo_map_io, + .init_irq = overo_init_irq, + .init_machine = overo_init, + .timer = &omap_timer, +MACHINE_END diff --git a/arch/arm/plat-omap/include/mach/board-overo.h b/arch/arm/plat-omap/include/mach/board-overo.h new file mode 100644 index 00000000000..7ecae66966d --- /dev/null +++ b/arch/arm/plat-omap/include/mach/board-overo.h @@ -0,0 +1,26 @@ +/* + * board-overo.h (Gumstix Overo) + * + * Initial code: Steve Sakoman + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef __ASM_ARCH_OVERO_H +#define __ASM_ARCH_OVERO_H + +#define OVERO_GPIO_BT_XGATE 15 +#define OVERO_GPIO_W2W_NRESET 16 +#define OVERO_GPIO_BT_NRESET 164 +#define OVERO_GPIO_USBH_CPEN 168 +#define OVERO_GPIO_USBH_NRESET 183 + +#endif /* ____ASM_ARCH_OVERO_H */ + -- cgit v1.2.3-70-g09d2 From 778e4875fb9ac8dcef654aaadb53a953cde96026 Mon Sep 17 00:00:00 2001 From: Steve Sakoman Date: Thu, 9 Oct 2008 17:51:43 +0300 Subject: ARM: OMAP3: Defconfig for the Gumstix Overo board (rev 3) Add defconfig for the Gumstix Overo board Signed-off-by: Steve Sakoman Signed-off-by: Tony Lindgren --- arch/arm/configs/overo_defconfig | 1885 ++++++++++++++++++++++++++++++++++++++ 1 file changed, 1885 insertions(+) create mode 100644 arch/arm/configs/overo_defconfig (limited to 'arch') diff --git a/arch/arm/configs/overo_defconfig b/arch/arm/configs/overo_defconfig new file mode 100644 index 00000000000..49200967a15 --- /dev/null +++ b/arch/arm/configs/overo_defconfig @@ -0,0 +1,1885 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.27-rc8 +# Fri Oct 3 11:50:34 2008 +# +CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_MMU=y +# CONFIG_NO_IOPORT is not set +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_ARCH_SUPPORTS_AOUT=y +CONFIG_ZONE_DMA=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +CONFIG_OPROFILE_ARMV7=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set +CONFIG_BSD_PROCESS_ACCT=y +# CONFIG_BSD_PROCESS_ACCT_V3 is not set +# CONFIG_TASKSTATS is not set +# CONFIG_AUDIT is not set +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +CONFIG_GROUP_SCHED=y +CONFIG_FAIR_GROUP_SCHED=y +# CONFIG_RT_GROUP_SCHED is not set +CONFIG_USER_SCHED=y +# CONFIG_CGROUP_SCHED is not set +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y +# CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +CONFIG_UID16=y +# CONFIG_SYSCTL_SYSCALL is not set +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +# CONFIG_ELF_CORE is not set +# CONFIG_COMPAT_BRK is not set +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLUB_DEBUG=y +# CONFIG_SLAB is not set +CONFIG_SLUB=y +# CONFIG_SLOB is not set +CONFIG_PROFILING=y +# CONFIG_MARKERS is not set +CONFIG_OPROFILE=y +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set +# CONFIG_HAVE_IOREMAP_PROT is not set +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +# CONFIG_HAVE_ARCH_TRACEHOOK is not set +# CONFIG_HAVE_DMA_ATTRS is not set +# CONFIG_USE_GENERIC_SMP_HELPERS is not set +CONFIG_HAVE_CLK=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set +CONFIG_MODULE_UNLOAD=y +CONFIG_MODULE_FORCE_UNLOAD=y +CONFIG_MODVERSIONS=y +CONFIG_MODULE_SRCVERSION_ALL=y +CONFIG_KMOD=y +CONFIG_BLOCK=y +CONFIG_LBD=y +# CONFIG_BLK_DEV_IO_TRACE is not set +CONFIG_LSF=y +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +CONFIG_DEFAULT_CFQ=y +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="cfq" +CONFIG_CLASSIC_RCU=y + +# +# System Type +# +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_CLPS7500 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KIRKWOOD is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_LOKI is not set +# CONFIG_ARCH_MV78XX0 is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_ORION5X is not set +# CONFIG_ARCH_PNX4008 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_DAVINCI is not set +CONFIG_ARCH_OMAP=y +# CONFIG_ARCH_MSM7X00A is not set + +# +# TI OMAP Implementations +# +CONFIG_ARCH_OMAP_OTG=y +# CONFIG_ARCH_OMAP1 is not set +# CONFIG_ARCH_OMAP2 is not set +CONFIG_ARCH_OMAP3=y + +# +# OMAP Feature Selections +# +# CONFIG_OMAP_DEBUG_POWERDOMAIN is not set +# CONFIG_OMAP_DEBUG_CLOCKDOMAIN is not set +# CONFIG_OMAP_RESET_CLOCKS is not set +# CONFIG_OMAP_MUX is not set +CONFIG_OMAP_MCBSP=y +# CONFIG_OMAP_MPU_TIMER is not set +CONFIG_OMAP_32K_TIMER=y +CONFIG_OMAP_32K_TIMER_HZ=128 +CONFIG_OMAP_DM_TIMER=y +# CONFIG_OMAP_LL_DEBUG_UART1 is not set +# CONFIG_OMAP_LL_DEBUG_UART2 is not set +CONFIG_OMAP_LL_DEBUG_UART3=y +CONFIG_ARCH_OMAP34XX=y +CONFIG_ARCH_OMAP3430=y + +# +# OMAP Board Type +# +# CONFIG_MACH_OMAP3_BEAGLE is not set +CONFIG_MACH_OVERO=y + +# +# Boot options +# + +# +# Power management +# + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_32v6K=y +CONFIG_CPU_V7=y +CONFIG_CPU_32v7=y +CONFIG_CPU_ABRT_EV7=y +CONFIG_CPU_PABRT_IFAR=y +CONFIG_CPU_CACHE_V7=y +CONFIG_CPU_CACHE_VIPT=y +CONFIG_CPU_COPY_V6=y +CONFIG_CPU_TLB_V7=y +CONFIG_CPU_HAS_ASID=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +CONFIG_ARM_THUMB=y +CONFIG_ARM_THUMBEE=y +# CONFIG_CPU_ICACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_CPU_BPREDICT_DISABLE is not set +CONFIG_HAS_TLS_REG=y +# CONFIG_OUTER_CACHE is not set + +# +# Bus support +# +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +CONFIG_TICK_ONESHOT=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_VMSPLIT_3G=y +# CONFIG_VMSPLIT_2G is not set +# CONFIG_VMSPLIT_1G is not set +CONFIG_PAGE_OFFSET=0xC0000000 +# CONFIG_PREEMPT is not set +CONFIG_HZ=128 +CONFIG_AEABI=y +# CONFIG_OABI_COMPAT is not set +CONFIG_ARCH_FLATMEM_HAS_HOLES=y +# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y +CONFIG_LEDS=y +CONFIG_ALIGNMENT_TRAP=y + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE=" debug " +# CONFIG_XIP_KERNEL is not set +CONFIG_KEXEC=y +CONFIG_ATAGS_PROC=y + +# +# CPU Power Management +# +CONFIG_CPU_FREQ=y +CONFIG_CPU_FREQ_TABLE=y +# CONFIG_CPU_FREQ_DEBUG is not set +CONFIG_CPU_FREQ_STAT=y +CONFIG_CPU_FREQ_STAT_DETAILS=y +CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y +# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set +CONFIG_CPU_FREQ_GOV_PERFORMANCE=y +# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set +CONFIG_CPU_FREQ_GOV_USERSPACE=y +CONFIG_CPU_FREQ_GOV_ONDEMAND=y +# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set +# CONFIG_CPU_IDLE is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +CONFIG_VFP=y +CONFIG_VFPv3=y +CONFIG_NEON=y + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +CONFIG_BINFMT_AOUT=m +CONFIG_BINFMT_MISC=y + +# +# Power management options +# +# CONFIG_PM is not set +CONFIG_ARCH_SUSPEND_POSSIBLE=y +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +CONFIG_PACKET_MMAP=y +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set +CONFIG_NET_KEY=y +# CONFIG_NET_KEY_MIGRATE is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +CONFIG_IP_PNP_RARP=y +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +CONFIG_INET_TUNNEL=m +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_LRO is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +CONFIG_IPV6=m +# CONFIG_IPV6_PRIVACY is not set +# CONFIG_IPV6_ROUTER_PREF is not set +# CONFIG_IPV6_OPTIMISTIC_DAD is not set +# CONFIG_INET6_AH is not set +# CONFIG_INET6_ESP is not set +# CONFIG_INET6_IPCOMP is not set +# CONFIG_IPV6_MIP6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +CONFIG_INET6_XFRM_MODE_TRANSPORT=m +CONFIG_INET6_XFRM_MODE_TUNNEL=m +CONFIG_INET6_XFRM_MODE_BEET=m +# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set +CONFIG_IPV6_SIT=m +CONFIG_IPV6_NDISC_NODETYPE=y +# CONFIG_IPV6_TUNNEL is not set +# CONFIG_IPV6_MULTIPLE_TABLES is not set +# CONFIG_IPV6_MROUTE is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +CONFIG_BT=y +CONFIG_BT_L2CAP=y +CONFIG_BT_SCO=y +CONFIG_BT_RFCOMM=y +CONFIG_BT_RFCOMM_TTY=y +CONFIG_BT_BNEP=y +CONFIG_BT_BNEP_MC_FILTER=y +CONFIG_BT_BNEP_PROTO_FILTER=y +CONFIG_BT_HIDP=y + +# +# Bluetooth device drivers +# +CONFIG_BT_HCIUSB=m +CONFIG_BT_HCIUSB_SCO=y +# CONFIG_BT_HCIBTUSB is not set +# CONFIG_BT_HCIBTSDIO is not set +CONFIG_BT_HCIUART=y +CONFIG_BT_HCIUART_H4=y +CONFIG_BT_HCIUART_BCSP=y +# CONFIG_BT_HCIUART_LL is not set +CONFIG_BT_HCIBCM203X=y +CONFIG_BT_HCIBPA10X=y +# CONFIG_BT_HCIBFUSB is not set +# CONFIG_BT_HCIVHCI is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +CONFIG_CFG80211=y +CONFIG_NL80211=y +CONFIG_WIRELESS_EXT=y +CONFIG_WIRELESS_EXT_SYSFS=y +CONFIG_MAC80211=y + +# +# Rate control algorithm selection +# +CONFIG_MAC80211_RC_PID=y +CONFIG_MAC80211_RC_DEFAULT_PID=y +CONFIG_MAC80211_RC_DEFAULT="pid" +# CONFIG_MAC80211_MESH is not set +CONFIG_MAC80211_LEDS=y +# CONFIG_MAC80211_DEBUGFS is not set +# CONFIG_MAC80211_DEBUG_MENU is not set +CONFIG_IEEE80211=y +# CONFIG_IEEE80211_DEBUG is not set +CONFIG_IEEE80211_CRYPT_WEP=y +CONFIG_IEEE80211_CRYPT_CCMP=y +CONFIG_IEEE80211_CRYPT_TKIP=y +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +CONFIG_MTD_CONCAT=y +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +# CONFIG_MTD_CMDLINE_PARTS is not set +# CONFIG_MTD_AFS_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +# CONFIG_MTD_CFI is not set +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_DATAFLASH is not set +# CONFIG_MTD_M25P80 is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +CONFIG_MTD_NAND=y +# CONFIG_MTD_NAND_VERIFY_WRITE is not set +# CONFIG_MTD_NAND_ECC_SMC is not set +# CONFIG_MTD_NAND_MUSEUM_IDS is not set +CONFIG_MTD_NAND_IDS=y +# CONFIG_MTD_NAND_DISKONCHIP is not set +# CONFIG_MTD_NAND_NANDSIM is not set +# CONFIG_MTD_NAND_PLATFORM is not set +# CONFIG_MTD_ALAUDA is not set +# CONFIG_MTD_ONENAND is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +CONFIG_BLK_DEV_CRYPTOLOOP=m +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_UB is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=16384 +# CONFIG_BLK_DEV_XIP is not set +CONFIG_CDROM_PKTCDVD=m +CONFIG_CDROM_PKTCDVD_BUFFERS=8 +# CONFIG_CDROM_PKTCDVD_WCACHE is not set +# CONFIG_ATA_OVER_ETH is not set +CONFIG_MISC_DEVICES=y +CONFIG_EEPROM_93CX6=m +# CONFIG_ENCLOSURE_SERVICES is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +CONFIG_RAID_ATTRS=m +CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +CONFIG_CHR_DEV_SG=m +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +CONFIG_SCSI_MULTI_LUN=y +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set +CONFIG_SCSI_LOWLEVEL=y +# CONFIG_ISCSI_TCP is not set +# CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_DH is not set +# CONFIG_ATA is not set +CONFIG_MD=y +CONFIG_BLK_DEV_MD=m +CONFIG_MD_LINEAR=m +CONFIG_MD_RAID0=m +CONFIG_MD_RAID1=m +CONFIG_MD_RAID10=m +CONFIG_MD_RAID456=m +CONFIG_MD_RAID5_RESHAPE=y +CONFIG_MD_MULTIPATH=m +CONFIG_MD_FAULTY=m +CONFIG_BLK_DEV_DM=m +# CONFIG_DM_DEBUG is not set +CONFIG_DM_CRYPT=m +CONFIG_DM_SNAPSHOT=m +CONFIG_DM_MIRROR=m +CONFIG_DM_ZERO=m +CONFIG_DM_MULTIPATH=m +CONFIG_DM_DELAY=m +# CONFIG_DM_UEVENT is not set +CONFIG_NETDEVICES=y +CONFIG_DUMMY=m +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +CONFIG_TUN=m +# CONFIG_VETH is not set +# CONFIG_NET_ETHERNET is not set +CONFIG_MII=y +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +CONFIG_WLAN_80211=y +CONFIG_LIBERTAS=y +CONFIG_LIBERTAS_USB=y +CONFIG_LIBERTAS_SDIO=y +CONFIG_LIBERTAS_DEBUG=y +CONFIG_USB_ZD1201=m +# CONFIG_USB_NET_RNDIS_WLAN is not set +CONFIG_RTL8187=m +# CONFIG_MAC80211_HWSIM is not set +CONFIG_P54_COMMON=m +CONFIG_P54_USB=m +# CONFIG_IWLWIFI_LEDS is not set +CONFIG_HOSTAP=m +CONFIG_HOSTAP_FIRMWARE=y +CONFIG_HOSTAP_FIRMWARE_NVRAM=y +# CONFIG_B43 is not set +# CONFIG_B43LEGACY is not set +# CONFIG_ZD1211RW is not set +# CONFIG_RT2X00 is not set + +# +# USB Network Adapters +# +CONFIG_USB_CATC=m +CONFIG_USB_KAWETH=m +CONFIG_USB_PEGASUS=m +CONFIG_USB_RTL8150=m +CONFIG_USB_USBNET=y +CONFIG_USB_NET_AX8817X=y +CONFIG_USB_NET_CDCETHER=y +CONFIG_USB_NET_DM9601=m +CONFIG_USB_NET_GL620A=m +CONFIG_USB_NET_NET1080=m +CONFIG_USB_NET_PLUSB=m +CONFIG_USB_NET_MCS7830=m +CONFIG_USB_NET_RNDIS_HOST=m +CONFIG_USB_NET_CDC_SUBSET=m +CONFIG_USB_ALI_M5632=y +CONFIG_USB_AN2720=y +CONFIG_USB_BELKIN=y +CONFIG_USB_ARMLINUX=y +CONFIG_USB_EPSON2888=y +CONFIG_USB_KC2190=y +CONFIG_USB_NET_ZAURUS=m +# CONFIG_WAN is not set +CONFIG_PPP=m +# CONFIG_PPP_MULTILINK is not set +# CONFIG_PPP_FILTER is not set +CONFIG_PPP_ASYNC=m +CONFIG_PPP_SYNC_TTY=m +CONFIG_PPP_DEFLATE=m +CONFIG_PPP_BSDCOMP=m +CONFIG_PPP_MPPE=m +CONFIG_PPPOE=m +# CONFIG_PPPOL2TP is not set +# CONFIG_SLIP is not set +CONFIG_SLHC=m +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +CONFIG_INPUT_MOUSEDEV_PSAUX=y +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +# CONFIG_KEYBOARD_ATKBD is not set +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +# CONFIG_KEYBOARD_GPIO is not set +CONFIG_INPUT_MOUSE=y +CONFIG_MOUSE_PS2=y +CONFIG_MOUSE_PS2_ALPS=y +CONFIG_MOUSE_PS2_LOGIPS2PP=y +CONFIG_MOUSE_PS2_SYNAPTICS=y +CONFIG_MOUSE_PS2_LIFEBOOK=y +CONFIG_MOUSE_PS2_TRACKPOINT=y +# CONFIG_MOUSE_PS2_TOUCHKIT is not set +# CONFIG_MOUSE_SERIAL is not set +# CONFIG_MOUSE_APPLETOUCH is not set +# CONFIG_MOUSE_BCM5974 is not set +# CONFIG_MOUSE_VSXXXAA is not set +# CONFIG_MOUSE_GPIO is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +CONFIG_SERIO=y +CONFIG_SERIO_SERPORT=y +CONFIG_SERIO_LIBPS2=y +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +CONFIG_VT_HW_CONSOLE_BINDING=y +CONFIG_DEVKMEM=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_NR_UARTS=32 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 +CONFIG_SERIAL_8250_EXTENDED=y +CONFIG_SERIAL_8250_MANY_PORTS=y +CONFIG_SERIAL_8250_SHARE_IRQ=y +CONFIG_SERIAL_8250_DETECT_IRQ=y +CONFIG_SERIAL_8250_RSA=y + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +# CONFIG_LEGACY_PTYS is not set +# CONFIG_IPMI_HANDLER is not set +CONFIG_HW_RANDOM=y +# CONFIG_NVRAM is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_CHARDEV=y +CONFIG_I2C_HELPER_AUTO=y + +# +# I2C Hardware Bus support +# + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +# CONFIG_I2C_GPIO is not set +# CONFIG_I2C_OCORES is not set +CONFIG_I2C_OMAP=y +# CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_TINY_USB is not set + +# +# Other I2C/SMBus bus drivers +# +# CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_STUB is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_DS1682 is not set +# CONFIG_AT24 is not set +CONFIG_SENSORS_EEPROM=y +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_PCF8575 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_ISP1301_OMAP is not set +# CONFIG_TPS65010 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set +CONFIG_SPI=y +# CONFIG_SPI_DEBUG is not set +CONFIG_SPI_MASTER=y + +# +# SPI Master Controller Drivers +# +# CONFIG_SPI_BITBANG is not set +CONFIG_SPI_OMAP24XX=y + +# +# SPI Protocol Masters +# +# CONFIG_SPI_AT25 is not set +# CONFIG_SPI_SPIDEV is not set +# CONFIG_SPI_TLE62X0 is not set +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_GPIOLIB=y +CONFIG_DEBUG_GPIO=y +CONFIG_GPIO_SYSFS=y + +# +# I2C GPIO expanders: +# +# CONFIG_GPIO_MAX732X is not set +# CONFIG_GPIO_PCA953X is not set +# CONFIG_GPIO_PCF857X is not set + +# +# PCI GPIO expanders: +# + +# +# SPI GPIO expanders: +# +# CONFIG_GPIO_MAX7301 is not set +# CONFIG_GPIO_MCP23S08 is not set +# CONFIG_W1 is not set +CONFIG_POWER_SUPPLY=m +# CONFIG_POWER_SUPPLY_DEBUG is not set +# CONFIG_PDA_POWER is not set +# CONFIG_BATTERY_DS2760 is not set +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_AD7414 is not set +# CONFIG_SENSORS_AD7418 is not set +# CONFIG_SENSORS_ADCXX is not set +# CONFIG_SENSORS_ADM1021 is not set +# CONFIG_SENSORS_ADM1025 is not set +# CONFIG_SENSORS_ADM1026 is not set +# CONFIG_SENSORS_ADM1029 is not set +# CONFIG_SENSORS_ADM1031 is not set +# CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ADT7470 is not set +# CONFIG_SENSORS_ADT7473 is not set +# CONFIG_SENSORS_ATXP1 is not set +# CONFIG_SENSORS_DS1621 is not set +# CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_F71882FG is not set +# CONFIG_SENSORS_F75375S is not set +# CONFIG_SENSORS_GL518SM is not set +# CONFIG_SENSORS_GL520SM is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_LM63 is not set +# CONFIG_SENSORS_LM70 is not set +# CONFIG_SENSORS_LM75 is not set +# CONFIG_SENSORS_LM77 is not set +# CONFIG_SENSORS_LM78 is not set +# CONFIG_SENSORS_LM80 is not set +# CONFIG_SENSORS_LM83 is not set +# CONFIG_SENSORS_LM85 is not set +# CONFIG_SENSORS_LM87 is not set +# CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set +# CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_MAX1111 is not set +# CONFIG_SENSORS_MAX1619 is not set +# CONFIG_SENSORS_MAX6650 is not set +# CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_DME1737 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47M192 is not set +# CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_ADS7828 is not set +# CONFIG_SENSORS_THMC50 is not set +# CONFIG_SENSORS_VT1211 is not set +# CONFIG_SENSORS_W83781D is not set +# CONFIG_SENSORS_W83791D is not set +# CONFIG_SENSORS_W83792D is not set +# CONFIG_SENSORS_W83793 is not set +# CONFIG_SENSORS_W83L785TS is not set +# CONFIG_SENSORS_W83L786NG is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set +# CONFIG_HWMON_DEBUG_CHIP is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set +CONFIG_WATCHDOG=y +CONFIG_WATCHDOG_NOWAYOUT=y + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set + +# +# USB-based Watchdog Cards +# +# CONFIG_USBPCWATCHDOG is not set + +# +# Sonics Silicon Backplane +# +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_HTC_EGPIO is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_UCB1400_CORE is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_T7L66XB is not set +# CONFIG_MFD_TC6387XB is not set +# CONFIG_MFD_TC6393XB is not set + +# +# Multimedia devices +# + +# +# Multimedia core support +# +CONFIG_VIDEO_DEV=m +CONFIG_VIDEO_V4L2_COMMON=m +CONFIG_VIDEO_ALLOW_V4L1=y +CONFIG_VIDEO_V4L1_COMPAT=y +CONFIG_DVB_CORE=m +CONFIG_VIDEO_MEDIA=m + +# +# Multimedia drivers +# +CONFIG_MEDIA_ATTACH=y +CONFIG_MEDIA_TUNER=m +# CONFIG_MEDIA_TUNER_CUSTOMIZE is not set +CONFIG_MEDIA_TUNER_SIMPLE=m +CONFIG_MEDIA_TUNER_TDA8290=m +CONFIG_MEDIA_TUNER_TDA827X=m +CONFIG_MEDIA_TUNER_TDA18271=m +CONFIG_MEDIA_TUNER_TDA9887=m +CONFIG_MEDIA_TUNER_TEA5761=m +CONFIG_MEDIA_TUNER_TEA5767=m +CONFIG_MEDIA_TUNER_MT20XX=m +CONFIG_MEDIA_TUNER_MT2060=m +CONFIG_MEDIA_TUNER_MT2266=m +CONFIG_MEDIA_TUNER_QT1010=m +CONFIG_MEDIA_TUNER_XC2028=m +CONFIG_MEDIA_TUNER_XC5000=m +CONFIG_MEDIA_TUNER_MXL5005S=m +CONFIG_VIDEO_V4L2=m +CONFIG_VIDEO_V4L1=m +CONFIG_VIDEO_TVEEPROM=m +CONFIG_VIDEO_TUNER=m +CONFIG_VIDEO_CAPTURE_DRIVERS=y +# CONFIG_VIDEO_ADV_DEBUG is not set +CONFIG_VIDEO_HELPER_CHIPS_AUTO=y +CONFIG_VIDEO_MSP3400=m +CONFIG_VIDEO_CS53L32A=m +CONFIG_VIDEO_WM8775=m +CONFIG_VIDEO_SAA711X=m +CONFIG_VIDEO_CX25840=m +CONFIG_VIDEO_CX2341X=m +# CONFIG_VIDEO_VIVI is not set +# CONFIG_VIDEO_CPIA is not set +# CONFIG_VIDEO_CPIA2 is not set +# CONFIG_VIDEO_SAA5246A is not set +# CONFIG_VIDEO_SAA5249 is not set +# CONFIG_TUNER_3036 is not set +# CONFIG_VIDEO_AU0828 is not set +CONFIG_V4L_USB_DRIVERS=y +CONFIG_USB_VIDEO_CLASS=m +CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y +# CONFIG_USB_GSPCA is not set +CONFIG_VIDEO_PVRUSB2=m +CONFIG_VIDEO_PVRUSB2_SYSFS=y +CONFIG_VIDEO_PVRUSB2_DVB=y +# CONFIG_VIDEO_PVRUSB2_DEBUGIFC is not set +# CONFIG_VIDEO_EM28XX is not set +CONFIG_VIDEO_USBVISION=m +CONFIG_VIDEO_USBVIDEO=m +CONFIG_USB_VICAM=m +CONFIG_USB_IBMCAM=m +CONFIG_USB_KONICAWC=m +CONFIG_USB_QUICKCAM_MESSENGER=m +# CONFIG_USB_ET61X251 is not set +CONFIG_VIDEO_OVCAMCHIP=m +CONFIG_USB_W9968CF=m +CONFIG_USB_OV511=m +CONFIG_USB_SE401=m +CONFIG_USB_SN9C102=m +CONFIG_USB_STV680=m +# CONFIG_USB_ZC0301 is not set +CONFIG_USB_PWC=m +# CONFIG_USB_PWC_DEBUG is not set +CONFIG_USB_ZR364XX=m +# CONFIG_USB_STKWEBCAM is not set +# CONFIG_USB_S2255 is not set +# CONFIG_SOC_CAMERA is not set +# CONFIG_VIDEO_SH_MOBILE_CEU is not set +CONFIG_RADIO_ADAPTERS=y +# CONFIG_USB_DSBR is not set +# CONFIG_USB_SI470X is not set +CONFIG_DVB_CAPTURE_DRIVERS=y +# CONFIG_TTPCI_EEPROM is not set + +# +# Supported USB Adapters +# +CONFIG_DVB_USB=m +# CONFIG_DVB_USB_DEBUG is not set +CONFIG_DVB_USB_A800=m +CONFIG_DVB_USB_DIBUSB_MB=m +# CONFIG_DVB_USB_DIBUSB_MB_FAULTY is not set +CONFIG_DVB_USB_DIBUSB_MC=m +CONFIG_DVB_USB_DIB0700=m +CONFIG_DVB_USB_UMT_010=m +CONFIG_DVB_USB_CXUSB=m +CONFIG_DVB_USB_M920X=m +CONFIG_DVB_USB_GL861=m +CONFIG_DVB_USB_AU6610=m +CONFIG_DVB_USB_DIGITV=m +CONFIG_DVB_USB_VP7045=m +CONFIG_DVB_USB_VP702X=m +CONFIG_DVB_USB_GP8PSK=m +CONFIG_DVB_USB_NOVA_T_USB2=m +CONFIG_DVB_USB_TTUSB2=m +CONFIG_DVB_USB_DTT200U=m +CONFIG_DVB_USB_OPERA1=m +CONFIG_DVB_USB_AF9005=m +CONFIG_DVB_USB_AF9005_REMOTE=m +# CONFIG_DVB_USB_DW2102 is not set +# CONFIG_DVB_USB_ANYSEE is not set +CONFIG_DVB_TTUSB_BUDGET=m +CONFIG_DVB_TTUSB_DEC=m +CONFIG_DVB_CINERGYT2=m +# CONFIG_DVB_CINERGYT2_TUNING is not set +# CONFIG_DVB_SIANO_SMS1XXX is not set + +# +# Supported FlexCopII (B2C2) Adapters +# +# CONFIG_DVB_B2C2_FLEXCOP is not set + +# +# Supported DVB Frontends +# + +# +# Customise DVB Frontends +# +# CONFIG_DVB_FE_CUSTOMISE is not set + +# +# DVB-S (satellite) frontends +# +CONFIG_DVB_CX24110=m +CONFIG_DVB_CX24123=m +CONFIG_DVB_MT312=m +CONFIG_DVB_S5H1420=m +CONFIG_DVB_STV0299=m +CONFIG_DVB_TDA8083=m +CONFIG_DVB_TDA10086=m +CONFIG_DVB_VES1X93=m +CONFIG_DVB_TUNER_ITD1000=m +CONFIG_DVB_TDA826X=m +CONFIG_DVB_TUA6100=m + +# +# DVB-T (terrestrial) frontends +# +CONFIG_DVB_SP8870=m +CONFIG_DVB_SP887X=m +CONFIG_DVB_CX22700=m +CONFIG_DVB_CX22702=m +# CONFIG_DVB_DRX397XD is not set +CONFIG_DVB_L64781=m +CONFIG_DVB_TDA1004X=m +CONFIG_DVB_NXT6000=m +CONFIG_DVB_MT352=m +CONFIG_DVB_ZL10353=m +CONFIG_DVB_DIB3000MB=m +CONFIG_DVB_DIB3000MC=m +CONFIG_DVB_DIB7000M=m +CONFIG_DVB_DIB7000P=m +CONFIG_DVB_TDA10048=m + +# +# DVB-C (cable) frontends +# +CONFIG_DVB_VES1820=m +CONFIG_DVB_TDA10021=m +CONFIG_DVB_TDA10023=m +CONFIG_DVB_STV0297=m + +# +# ATSC (North American/Korean Terrestrial/Cable DTV) frontends +# +CONFIG_DVB_NXT200X=m +# CONFIG_DVB_OR51211 is not set +# CONFIG_DVB_OR51132 is not set +CONFIG_DVB_BCM3510=m +CONFIG_DVB_LGDT330X=m +CONFIG_DVB_S5H1409=m +CONFIG_DVB_AU8522=m +CONFIG_DVB_S5H1411=m + +# +# Digital terrestrial only tuners/PLL +# +CONFIG_DVB_PLL=m +CONFIG_DVB_TUNER_DIB0070=m + +# +# SEC control devices for DVB-S +# +CONFIG_DVB_LNBP21=m +# CONFIG_DVB_ISL6405 is not set +CONFIG_DVB_ISL6421=m +# CONFIG_DAB is not set + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +# CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +CONFIG_DISPLAY_SUPPORT=y + +# +# Display hardware drivers +# + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +CONFIG_SOUND=y +CONFIG_SND=y +CONFIG_SND_TIMER=y +CONFIG_SND_PCM=y +CONFIG_SND_HWDEP=y +CONFIG_SND_RAWMIDI=y +CONFIG_SND_SEQUENCER=m +# CONFIG_SND_SEQ_DUMMY is not set +CONFIG_SND_OSSEMUL=y +CONFIG_SND_MIXER_OSS=y +CONFIG_SND_PCM_OSS=y +CONFIG_SND_PCM_OSS_PLUGINS=y +CONFIG_SND_SEQUENCER_OSS=y +# CONFIG_SND_DYNAMIC_MINORS is not set +CONFIG_SND_SUPPORT_OLD_API=y +CONFIG_SND_VERBOSE_PROCFS=y +CONFIG_SND_VERBOSE_PRINTK=y +CONFIG_SND_DEBUG=y +# CONFIG_SND_DEBUG_VERBOSE is not set +# CONFIG_SND_PCM_XRUN_DEBUG is not set +CONFIG_SND_DRIVERS=y +# CONFIG_SND_DUMMY is not set +# CONFIG_SND_VIRMIDI is not set +# CONFIG_SND_MTPAV is not set +# CONFIG_SND_SERIAL_U16550 is not set +# CONFIG_SND_MPU401 is not set +CONFIG_SND_ARM=y +CONFIG_SND_SPI=y +CONFIG_SND_USB=y +CONFIG_SND_USB_AUDIO=y +CONFIG_SND_USB_CAIAQ=m +CONFIG_SND_USB_CAIAQ_INPUT=y +CONFIG_SND_SOC=y +CONFIG_SND_OMAP_SOC=y +# CONFIG_SOUND_PRIME is not set +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +CONFIG_HID_DEBUG=y +# CONFIG_HIDRAW is not set + +# +# USB Input Devices +# +CONFIG_USB_HID=y +# CONFIG_USB_HIDINPUT_POWERBOOK is not set +# CONFIG_HID_FF is not set +# CONFIG_USB_HIDDEV is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +# CONFIG_USB_ARCH_HAS_EHCI is not set +CONFIG_USB=y +CONFIG_USB_DEBUG=y +CONFIG_USB_ANNOUNCE_NEW_DEVICES=y + +# +# Miscellaneous USB options +# +CONFIG_USB_DEVICEFS=y +CONFIG_USB_DEVICE_CLASS=y +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_OTG is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set +CONFIG_USB_MON=y + +# +# USB Host Controller Drivers +# +# CONFIG_USB_C67X00_HCD is not set +# CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set +# CONFIG_USB_OHCI_HCD is not set +# CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set +CONFIG_USB_MUSB_HDRC=y +CONFIG_USB_MUSB_SOC=y + +# +# OMAP 343x high speed USB support +# +CONFIG_USB_MUSB_HOST=y +# CONFIG_USB_MUSB_PERIPHERAL is not set +# CONFIG_USB_MUSB_OTG is not set +CONFIG_USB_MUSB_HDRC_HCD=y +CONFIG_MUSB_PIO_ONLY=y +# CONFIG_USB_MUSB_DEBUG is not set + +# +# USB Device Class drivers +# +CONFIG_USB_ACM=m +CONFIG_USB_PRINTER=m +CONFIG_USB_WDM=y + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# may also be needed; see USB_STORAGE Help for more information +# +CONFIG_USB_STORAGE=y +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_ISD200 is not set +# CONFIG_USB_STORAGE_DPCM is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_ONETOUCH is not set +# CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set + +# +# USB port drivers +# +CONFIG_USB_SERIAL=m +# CONFIG_USB_EZUSB is not set +# CONFIG_USB_SERIAL_GENERIC is not set +# CONFIG_USB_SERIAL_AIRCABLE is not set +# CONFIG_USB_SERIAL_ARK3116 is not set +# CONFIG_USB_SERIAL_BELKIN is not set +# CONFIG_USB_SERIAL_CH341 is not set +# CONFIG_USB_SERIAL_WHITEHEAT is not set +# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set +# CONFIG_USB_SERIAL_CP2101 is not set +# CONFIG_USB_SERIAL_CYPRESS_M8 is not set +# CONFIG_USB_SERIAL_EMPEG is not set +# CONFIG_USB_SERIAL_FTDI_SIO is not set +# CONFIG_USB_SERIAL_FUNSOFT is not set +# CONFIG_USB_SERIAL_VISOR is not set +# CONFIG_USB_SERIAL_IPAQ is not set +# CONFIG_USB_SERIAL_IR is not set +# CONFIG_USB_SERIAL_EDGEPORT is not set +# CONFIG_USB_SERIAL_EDGEPORT_TI is not set +# CONFIG_USB_SERIAL_GARMIN is not set +# CONFIG_USB_SERIAL_IPW is not set +# CONFIG_USB_SERIAL_IUU is not set +# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set +# CONFIG_USB_SERIAL_KEYSPAN is not set +# CONFIG_USB_SERIAL_KLSI is not set +# CONFIG_USB_SERIAL_KOBIL_SCT is not set +# CONFIG_USB_SERIAL_MCT_U232 is not set +# CONFIG_USB_SERIAL_MOS7720 is not set +# CONFIG_USB_SERIAL_MOS7840 is not set +# CONFIG_USB_SERIAL_MOTOROLA is not set +# CONFIG_USB_SERIAL_NAVMAN is not set +# CONFIG_USB_SERIAL_PL2303 is not set +# CONFIG_USB_SERIAL_OTI6858 is not set +# CONFIG_USB_SERIAL_SPCP8X5 is not set +# CONFIG_USB_SERIAL_HP4X is not set +# CONFIG_USB_SERIAL_SAFE is not set +# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set +# CONFIG_USB_SERIAL_TI is not set +# CONFIG_USB_SERIAL_CYBERJACK is not set +# CONFIG_USB_SERIAL_XIRCOM is not set +# CONFIG_USB_SERIAL_OPTION is not set +# CONFIG_USB_SERIAL_OMNINET is not set +# CONFIG_USB_SERIAL_DEBUG is not set + +# +# USB Miscellaneous drivers +# +CONFIG_USB_EMI62=m +CONFIG_USB_EMI26=m +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_RIO500 is not set +CONFIG_USB_LEGOTOWER=m +CONFIG_USB_LCD=m +# CONFIG_USB_BERRY_CHARGE is not set +CONFIG_USB_LED=m +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_PHIDGET is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_TEST is not set +# CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_GADGET is not set +CONFIG_MMC=y +# CONFIG_MMC_DEBUG is not set +CONFIG_MMC_UNSAFE_RESUME=y + +# +# MMC/SD Card Drivers +# +CONFIG_MMC_BLOCK=y +CONFIG_MMC_BLOCK_BOUNCE=y +CONFIG_SDIO_UART=y +# CONFIG_MMC_TEST is not set + +# +# MMC/SD Host Controller Drivers +# +# CONFIG_MMC_SDHCI is not set +# CONFIG_MMC_OMAP is not set +# CONFIG_MMC_SPI is not set +# CONFIG_MEMSTICK is not set +# CONFIG_ACCESSIBILITY is not set +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y + +# +# LED drivers +# +# CONFIG_LEDS_PCA9532 is not set +CONFIG_LEDS_GPIO=y +# CONFIG_LEDS_PCA955X is not set + +# +# LED Triggers +# +CONFIG_LEDS_TRIGGERS=y +CONFIG_LEDS_TRIGGER_TIMER=y +CONFIG_LEDS_TRIGGER_HEARTBEAT=y +# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# I2C RTC drivers +# +# CONFIG_RTC_DRV_DS1307 is not set +# CONFIG_RTC_DRV_DS1374 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_MAX6900 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_X1205 is not set +# CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_PCF8583 is not set +# CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_S35390A is not set +# CONFIG_RTC_DRV_FM3130 is not set + +# +# SPI RTC drivers +# +# CONFIG_RTC_DRV_M41T94 is not set +# CONFIG_RTC_DRV_DS1305 is not set +# CONFIG_RTC_DRV_MAX6902 is not set +# CONFIG_RTC_DRV_R9701 is not set +# CONFIG_RTC_DRV_RS5C348 is not set + +# +# Platform RTC drivers +# +# CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1511 is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# on-CPU RTC drivers +# +# CONFIG_DMADEVICES is not set + +# +# Voltage and Current regulators +# +# CONFIG_REGULATOR is not set +# CONFIG_REGULATOR_FIXED_VOLTAGE is not set +# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set +# CONFIG_REGULATOR_BQ24022 is not set +# CONFIG_UIO is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +# CONFIG_EXT3_FS_XATTR is not set +# CONFIG_EXT4DEV_FS is not set +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +CONFIG_FS_POSIX_ACL=y +CONFIG_XFS_FS=m +# CONFIG_XFS_QUOTA is not set +# CONFIG_XFS_POSIX_ACL is not set +# CONFIG_XFS_RT is not set +# CONFIG_XFS_DEBUG is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +CONFIG_DNOTIFY=y +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +CONFIG_QUOTA=y +# CONFIG_QUOTA_NETLINK_INTERFACE is not set +CONFIG_PRINT_QUOTA_WARNING=y +# CONFIG_QFMT_V1 is not set +CONFIG_QFMT_V2=y +CONFIG_QUOTACTL=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +CONFIG_FUSE_FS=m + +# +# CD-ROM/DVD Filesystems +# +CONFIG_ISO9660_FS=m +CONFIG_JOLIET=y +CONFIG_ZISOFS=y +CONFIG_UDF_FS=m +CONFIG_UDF_NLS=y + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set +CONFIG_JFFS2_SUMMARY=y +CONFIG_JFFS2_FS_XATTR=y +CONFIG_JFFS2_FS_POSIX_ACL=y +CONFIG_JFFS2_FS_SECURITY=y +CONFIG_JFFS2_COMPRESSION_OPTIONS=y +CONFIG_JFFS2_ZLIB=y +CONFIG_JFFS2_LZO=y +CONFIG_JFFS2_RTIME=y +CONFIG_JFFS2_RUBIN=y +# CONFIG_JFFS2_CMODE_NONE is not set +CONFIG_JFFS2_CMODE_PRIORITY=y +# CONFIG_JFFS2_CMODE_SIZE is not set +# CONFIG_JFFS2_CMODE_FAVOURLZO is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +CONFIG_NFS_V4=y +CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +CONFIG_SUNRPC_GSS=y +CONFIG_RPCSEC_GSS_KRB5=y +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_BSD_DISKLABEL is not set +# CONFIG_MINIX_SUBPARTITION is not set +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set +# CONFIG_EFI_PARTITION is not set +# CONFIG_SYSV68_PARTITION is not set +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +CONFIG_NLS_ISO8859_1=y +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set +# CONFIG_DLM is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 +CONFIG_MAGIC_SYSRQ=y +# CONFIG_UNUSED_SYMBOLS is not set +CONFIG_DEBUG_FS=y +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_SCHED_DEBUG=y +CONFIG_SCHEDSTATS=y +CONFIG_TIMER_STATS=y +# CONFIG_DEBUG_OBJECTS is not set +# CONFIG_SLUB_DEBUG_ON is not set +# CONFIG_SLUB_STATS is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +CONFIG_DEBUG_MUTEXES=y +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +CONFIG_FRAME_POINTER=y +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +CONFIG_HAVE_FTRACE=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +# CONFIG_FTRACE is not set +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set +# CONFIG_DEBUG_USER is not set +# CONFIG_DEBUG_ERRORS is not set +# CONFIG_DEBUG_STACK_USAGE is not set +# CONFIG_DEBUG_LL is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_XOR_BLOCKS=m +CONFIG_ASYNC_CORE=m +CONFIG_ASYNC_MEMCPY=m +CONFIG_ASYNC_XOR=m +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_AEAD=m +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_HASH=m +CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_GF128MUL=m +CONFIG_CRYPTO_NULL=m +CONFIG_CRYPTO_CRYPTD=m +# CONFIG_CRYPTO_AUTHENC is not set +CONFIG_CRYPTO_TEST=m + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +CONFIG_CRYPTO_ECB=y +CONFIG_CRYPTO_LRW=m +CONFIG_CRYPTO_PCBC=m +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +CONFIG_CRYPTO_HMAC=m +CONFIG_CRYPTO_XCBC=m + +# +# Digest +# +CONFIG_CRYPTO_CRC32C=m +CONFIG_CRYPTO_MD4=m +CONFIG_CRYPTO_MD5=y +CONFIG_CRYPTO_MICHAEL_MIC=y +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set +CONFIG_CRYPTO_SHA1=m +CONFIG_CRYPTO_SHA256=m +CONFIG_CRYPTO_SHA512=m +CONFIG_CRYPTO_TGR192=m +CONFIG_CRYPTO_WP512=m + +# +# Ciphers +# +CONFIG_CRYPTO_AES=y +CONFIG_CRYPTO_ANUBIS=m +CONFIG_CRYPTO_ARC4=y +CONFIG_CRYPTO_BLOWFISH=m +CONFIG_CRYPTO_CAMELLIA=m +CONFIG_CRYPTO_CAST5=m +CONFIG_CRYPTO_CAST6=m +CONFIG_CRYPTO_DES=y +CONFIG_CRYPTO_FCRYPT=m +CONFIG_CRYPTO_KHAZAD=m +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +CONFIG_CRYPTO_SERPENT=m +CONFIG_CRYPTO_TEA=m +CONFIG_CRYPTO_TWOFISH=m +CONFIG_CRYPTO_TWOFISH_COMMON=m + +# +# Compression +# +CONFIG_CRYPTO_DEFLATE=m +# CONFIG_CRYPTO_LZO is not set +CONFIG_CRYPTO_HW=y + +# +# Library routines +# +CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set +# CONFIG_GENERIC_FIND_NEXT_BIT is not set +CONFIG_CRC_CCITT=y +CONFIG_CRC16=m +CONFIG_CRC_T10DIF=y +CONFIG_CRC_ITU_T=y +CONFIG_CRC32=y +CONFIG_CRC7=y +CONFIG_LIBCRC32C=y +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_LZO_COMPRESS=y +CONFIG_LZO_DECOMPRESS=y +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y -- cgit v1.2.3-70-g09d2 From 492656511b109b5f9ee64d05c90b5bd9043549fa Mon Sep 17 00:00:00 2001 From: Nishant Kamat Date: Fri, 10 Oct 2008 11:28:23 +0300 Subject: ARM: OMAP3: Add basic board support for OMAP LDP This adds minimal board support for the OMAP3430 LDP development platform. Signed-off-by: Nishant Kamat Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/Kconfig | 4 ++ arch/arm/mach-omap2/Makefile | 1 + arch/arm/mach-omap2/board-ldp.c | 86 +++++++++++++++++++++++++++++ arch/arm/plat-omap/include/mach/board-ldp.h | 36 ++++++++++++ arch/arm/plat-omap/include/mach/hardware.h | 4 ++ 5 files changed, 131 insertions(+) create mode 100644 arch/arm/mach-omap2/board-ldp.c create mode 100644 arch/arm/plat-omap/include/mach/board-ldp.h (limited to 'arch') diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index aef043b87b4..4832fcc7d04 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -48,6 +48,10 @@ config MACH_OMAP3_BEAGLE bool "OMAP3 BEAGLE board" depends on ARCH_OMAP3 && ARCH_OMAP34XX +config MACH_OMAP_LDP + bool "OMAP3 LDP board" + depends on ARCH_OMAP3 && ARCH_OMAP34XX + config MACH_OVERO bool "Gumstix Overo board" depends on ARCH_OMAP3 && ARCH_OMAP34XX diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index feb9caf771d..c69392372c9 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -30,5 +30,6 @@ obj-$(CONFIG_MACH_OMAP_H4) += board-h4.o obj-$(CONFIG_MACH_OMAP_2430SDP) += board-2430sdp.o obj-$(CONFIG_MACH_OMAP_APOLLON) += board-apollon.o obj-$(CONFIG_MACH_OMAP3_BEAGLE) += board-omap3beagle.o +obj-$(CONFIG_MACH_OMAP_LDP) += board-ldp.o obj-$(CONFIG_MACH_OVERO) += board-overo.o diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c new file mode 100644 index 00000000000..1ea59986aa7 --- /dev/null +++ b/arch/arm/mach-omap2/board-ldp.c @@ -0,0 +1,86 @@ +/* + * linux/arch/arm/mach-omap2/board-ldp.c + * + * Copyright (C) 2008 Texas Instruments Inc. + * Nishant Kamat + * + * Modified from mach-omap2/board-3430sdp.c + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +static void __init omap_ldp_init_irq(void) +{ + omap2_init_common_hw(); + omap_init_irq(); + omap_gpio_init(); +} + +static struct omap_uart_config ldp_uart_config __initdata = { + .enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)), +}; + +static struct omap_board_config_kernel ldp_config[] __initdata = { + { OMAP_TAG_UART, &ldp_uart_config }, +}; + +static int __init omap_i2c_init(void) +{ + omap_register_i2c_bus(1, 2600, NULL, 0); + omap_register_i2c_bus(2, 400, NULL, 0); + omap_register_i2c_bus(3, 400, NULL, 0); + return 0; +} + +static void __init omap_ldp_init(void) +{ + omap_i2c_init(); + omap_board_config = ldp_config; + omap_board_config_size = ARRAY_SIZE(ldp_config); + omap_serial_init(); +} + +static void __init omap_ldp_map_io(void) +{ + omap2_set_globals_343x(); + omap2_map_common_io(); +} + +MACHINE_START(OMAP_LDP, "OMAP LDP board") + .phys_io = 0x48000000, + .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc, + .boot_params = 0x80000100, + .map_io = omap_ldp_map_io, + .init_irq = omap_ldp_init_irq, + .init_machine = omap_ldp_init, + .timer = &omap_timer, +MACHINE_END diff --git a/arch/arm/plat-omap/include/mach/board-ldp.h b/arch/arm/plat-omap/include/mach/board-ldp.h new file mode 100644 index 00000000000..66e2746c04c --- /dev/null +++ b/arch/arm/plat-omap/include/mach/board-ldp.h @@ -0,0 +1,36 @@ +/* + * arch/arm/plat-omap/include/mach/board-ldp.h + * + * Hardware definitions for TI OMAP3 LDP. + * + * Copyright (C) 2008 Texas Instruments Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef __ASM_ARCH_OMAP_LDP_H +#define __ASM_ARCH_OMAP_LDP_H + +extern void twl4030_bci_battery_init(void); + +#define TWL4030_IRQNUM INT_34XX_SYS_NIRQ + +#endif /* __ASM_ARCH_OMAP_LDP_H */ diff --git a/arch/arm/plat-omap/include/mach/hardware.h b/arch/arm/plat-omap/include/mach/hardware.h index 80f6d7ec53e..6589ddbb63b 100644 --- a/arch/arm/plat-omap/include/mach/hardware.h +++ b/arch/arm/plat-omap/include/mach/hardware.h @@ -326,6 +326,10 @@ #include "board-omap3beagle.h" #endif +#ifdef CONFIG_MACH_OMAP_LDP +#include "board-ldp.h" +#endif + #ifdef CONFIG_MACH_OMAP_APOLLON #include "board-apollon.h" #endif -- cgit v1.2.3-70-g09d2 From 99b3075b9095c23acf8d884bdc7fe33c8c3520f0 Mon Sep 17 00:00:00 2001 From: Nishant Kamat Date: Fri, 10 Oct 2008 11:48:56 +0300 Subject: ARM: OMAP3: Add default kernel config for OMAP LDP This patch adds a default config for the OMAP LDP platform. Signed-off-by: Nishant Kamat Signed-off-by: Tony Lindgren --- arch/arm/configs/omap_ldp_defconfig | 1044 +++++++++++++++++++++++++++++++++++ 1 file changed, 1044 insertions(+) create mode 100644 arch/arm/configs/omap_ldp_defconfig (limited to 'arch') diff --git a/arch/arm/configs/omap_ldp_defconfig b/arch/arm/configs/omap_ldp_defconfig new file mode 100644 index 00000000000..948a212fb1c --- /dev/null +++ b/arch/arm/configs/omap_ldp_defconfig @@ -0,0 +1,1044 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.27-rc5 +# Fri Oct 10 11:49:41 2008 +# +CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_MMU=y +# CONFIG_NO_IOPORT is not set +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_ARCH_SUPPORTS_AOUT=y +CONFIG_ZONE_DMA=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +CONFIG_BSD_PROCESS_ACCT=y +# CONFIG_BSD_PROCESS_ACCT_V3 is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +CONFIG_GROUP_SCHED=y +CONFIG_FAIR_GROUP_SCHED=y +# CONFIG_RT_GROUP_SCHED is not set +CONFIG_USER_SCHED=y +# CONFIG_CGROUP_SCHED is not set +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y +# CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +CONFIG_UID16=y +# CONFIG_SYSCTL_SYSCALL is not set +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +CONFIG_KALLSYMS_EXTRA_PASS=y +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_COMPAT_BRK=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set +# CONFIG_HAVE_IOREMAP_PROT is not set +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +# CONFIG_HAVE_ARCH_TRACEHOOK is not set +# CONFIG_HAVE_DMA_ATTRS is not set +# CONFIG_USE_GENERIC_SMP_HELPERS is not set +CONFIG_HAVE_CLK=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +CONFIG_MODVERSIONS=y +CONFIG_MODULE_SRCVERSION_ALL=y +CONFIG_KMOD=y +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_CLASSIC_RCU=y + +# +# System Type +# +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_CLPS7500 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KIRKWOOD is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_LOKI is not set +# CONFIG_ARCH_MV78XX0 is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_ORION5X is not set +# CONFIG_ARCH_PNX4008 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_DAVINCI is not set +CONFIG_ARCH_OMAP=y +# CONFIG_ARCH_MSM7X00A is not set + +# +# TI OMAP Implementations +# +CONFIG_ARCH_OMAP_OTG=y +# CONFIG_ARCH_OMAP1 is not set +# CONFIG_ARCH_OMAP2 is not set +CONFIG_ARCH_OMAP3=y + +# +# OMAP Feature Selections +# +# CONFIG_OMAP_DEBUG_POWERDOMAIN is not set +# CONFIG_OMAP_DEBUG_CLOCKDOMAIN is not set +# CONFIG_OMAP_RESET_CLOCKS is not set +CONFIG_OMAP_MUX=y +CONFIG_OMAP_MUX_DEBUG=y +CONFIG_OMAP_MUX_WARNINGS=y +CONFIG_OMAP_MCBSP=y +# CONFIG_OMAP_MPU_TIMER is not set +CONFIG_OMAP_32K_TIMER=y +CONFIG_OMAP_32K_TIMER_HZ=128 +CONFIG_OMAP_DM_TIMER=y +# CONFIG_OMAP_LL_DEBUG_UART1 is not set +# CONFIG_OMAP_LL_DEBUG_UART2 is not set +CONFIG_OMAP_LL_DEBUG_UART3=y +CONFIG_OMAP_SERIAL_WAKE=y +CONFIG_ARCH_OMAP34XX=y +CONFIG_ARCH_OMAP3430=y + +# +# OMAP Board Type +# +# CONFIG_MACH_OMAP3_BEAGLE is not set +CONFIG_MACH_OMAP_LDP=y +# CONFIG_MACH_OVERO is not set + +# +# Boot options +# + +# +# Power management +# + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_32v6K=y +CONFIG_CPU_V7=y +CONFIG_CPU_32v7=y +CONFIG_CPU_ABRT_EV7=y +CONFIG_CPU_PABRT_IFAR=y +CONFIG_CPU_CACHE_V7=y +CONFIG_CPU_CACHE_VIPT=y +CONFIG_CPU_COPY_V6=y +CONFIG_CPU_TLB_V7=y +CONFIG_CPU_HAS_ASID=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +CONFIG_ARM_THUMB=y +# CONFIG_ARM_THUMBEE is not set +# CONFIG_CPU_ICACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_CPU_BPREDICT_DISABLE is not set +CONFIG_HAS_TLS_REG=y +# CONFIG_OUTER_CACHE is not set + +# +# Bus support +# +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +CONFIG_TICK_ONESHOT=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +# CONFIG_PREEMPT is not set +CONFIG_HZ=128 +CONFIG_AEABI=y +CONFIG_OABI_COMPAT=y +CONFIG_ARCH_FLATMEM_HAS_HOLES=y +# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y +# CONFIG_LEDS is not set +CONFIG_ALIGNMENT_TRAP=y + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="root=/dev/nfs nfsroot=192.168.0.1:/home/user/buildroot ip=192.168.0.2:192.168.0.1:192.168.0.1:255.255.255.0:tgt:eth0:off rw console=ttyS2,115200n8" +# CONFIG_XIP_KERNEL is not set +# CONFIG_KEXEC is not set + +# +# CPU Frequency scaling +# +# CONFIG_CPU_FREQ is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +CONFIG_FPE_NWFPE=y +# CONFIG_FPE_NWFPE_XP is not set +# CONFIG_FPE_FASTFPE is not set +CONFIG_VFP=y +CONFIG_VFPv3=y +# CONFIG_NEON is not set + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_AOUT is not set +CONFIG_BINFMT_MISC=y + +# +# Power management options +# +# CONFIG_PM is not set +CONFIG_ARCH_SUSPEND_POSSIBLE=y +# CONFIG_NET is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_MTD is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=16384 +# CONFIG_BLK_DEV_XIP is not set +# CONFIG_CDROM_PKTCDVD is not set +CONFIG_MISC_DEVICES=y +# CONFIG_EEPROM_93CX6 is not set +# CONFIG_ENCLOSURE_SERVICES is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +# CONFIG_CHR_DEV_SG is not set +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set +CONFIG_SCSI_LOWLEVEL=y +# CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_DH is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_INPUT_JOYDEV is not set +CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +CONFIG_INPUT_TOUCHSCREEN=y +CONFIG_TOUCHSCREEN_ADS7846=y +# CONFIG_TOUCHSCREEN_FUJITSU is not set +# CONFIG_TOUCHSCREEN_GUNZE is not set +# CONFIG_TOUCHSCREEN_ELO is not set +# CONFIG_TOUCHSCREEN_MTOUCH is not set +# CONFIG_TOUCHSCREEN_INEXIO is not set +# CONFIG_TOUCHSCREEN_MK712 is not set +# CONFIG_TOUCHSCREEN_PENMOUNT is not set +# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set +# CONFIG_TOUCHSCREEN_TOUCHWIN is not set +# CONFIG_TOUCHSCREEN_UCB1400 is not set +# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +CONFIG_DEVKMEM=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_NR_UARTS=32 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 +CONFIG_SERIAL_8250_EXTENDED=y +CONFIG_SERIAL_8250_MANY_PORTS=y +CONFIG_SERIAL_8250_SHARE_IRQ=y +CONFIG_SERIAL_8250_DETECT_IRQ=y +CONFIG_SERIAL_8250_RSA=y + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +# CONFIG_LEGACY_PTYS is not set +# CONFIG_IPMI_HANDLER is not set +CONFIG_HW_RANDOM=y +# CONFIG_NVRAM is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_CHARDEV=y +CONFIG_I2C_HELPER_AUTO=y + +# +# I2C Hardware Bus support +# + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +# CONFIG_I2C_GPIO is not set +# CONFIG_I2C_OCORES is not set +CONFIG_I2C_OMAP=y +# CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set + +# +# Other I2C/SMBus bus drivers +# +# CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_STUB is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_DS1682 is not set +# CONFIG_AT24 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_PCF8575 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_ISP1301_OMAP is not set +# CONFIG_TPS65010 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set +CONFIG_SPI=y +# CONFIG_SPI_DEBUG is not set +CONFIG_SPI_MASTER=y + +# +# SPI Master Controller Drivers +# +# CONFIG_SPI_BITBANG is not set +CONFIG_SPI_OMAP24XX=y + +# +# SPI Protocol Masters +# +# CONFIG_SPI_AT25 is not set +# CONFIG_SPI_SPIDEV is not set +# CONFIG_SPI_TLE62X0 is not set +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_GPIOLIB=y +# CONFIG_DEBUG_GPIO is not set +# CONFIG_GPIO_SYSFS is not set + +# +# I2C GPIO expanders: +# +# CONFIG_GPIO_MAX732X is not set +# CONFIG_GPIO_PCA953X is not set +# CONFIG_GPIO_PCF857X is not set + +# +# PCI GPIO expanders: +# + +# +# SPI GPIO expanders: +# +# CONFIG_GPIO_MAX7301 is not set +# CONFIG_GPIO_MCP23S08 is not set +CONFIG_W1=y + +# +# 1-wire Bus Masters +# +# CONFIG_W1_MASTER_DS2482 is not set +# CONFIG_W1_MASTER_DS1WM is not set +# CONFIG_W1_MASTER_GPIO is not set + +# +# 1-wire Slaves +# +# CONFIG_W1_SLAVE_THERM is not set +# CONFIG_W1_SLAVE_SMEM is not set +# CONFIG_W1_SLAVE_DS2433 is not set +# CONFIG_W1_SLAVE_DS2760 is not set +CONFIG_POWER_SUPPLY=y +# CONFIG_POWER_SUPPLY_DEBUG is not set +# CONFIG_PDA_POWER is not set +# CONFIG_BATTERY_DS2760 is not set +# CONFIG_HWMON is not set +CONFIG_WATCHDOG=y +CONFIG_WATCHDOG_NOWAYOUT=y + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set + +# +# Sonics Silicon Backplane +# +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_HTC_EGPIO is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_T7L66XB is not set +# CONFIG_MFD_TC6387XB is not set +# CONFIG_MFD_TC6393XB is not set + +# +# Multimedia devices +# + +# +# Multimedia core support +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# +CONFIG_DAB=y + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +CONFIG_VIDEO_OUTPUT_CONTROL=m +# CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +CONFIG_SOUND=y +CONFIG_SND=y +# CONFIG_SND_SEQUENCER is not set +# CONFIG_SND_MIXER_OSS is not set +# CONFIG_SND_PCM_OSS is not set +# CONFIG_SND_DYNAMIC_MINORS is not set +CONFIG_SND_SUPPORT_OLD_API=y +CONFIG_SND_VERBOSE_PROCFS=y +# CONFIG_SND_VERBOSE_PRINTK is not set +# CONFIG_SND_DEBUG is not set +CONFIG_SND_DRIVERS=y +# CONFIG_SND_DUMMY is not set +# CONFIG_SND_MTPAV is not set +# CONFIG_SND_SERIAL_U16550 is not set +# CONFIG_SND_MPU401 is not set +CONFIG_SND_ARM=y +CONFIG_SND_SPI=y +# CONFIG_SND_SOC is not set +# CONFIG_SOUND_PRIME is not set +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +# CONFIG_HID_DEBUG is not set +# CONFIG_HIDRAW is not set +# CONFIG_USB_SUPPORT is not set +CONFIG_MMC=y +# CONFIG_MMC_DEBUG is not set +# CONFIG_MMC_UNSAFE_RESUME is not set + +# +# MMC/SD Card Drivers +# +CONFIG_MMC_BLOCK=y +CONFIG_MMC_BLOCK_BOUNCE=y +# CONFIG_SDIO_UART is not set +# CONFIG_MMC_TEST is not set + +# +# MMC/SD Host Controller Drivers +# +# CONFIG_MMC_SDHCI is not set +# CONFIG_MMC_OMAP is not set +# CONFIG_MMC_SPI is not set +# CONFIG_NEW_LEDS is not set +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# I2C RTC drivers +# +# CONFIG_RTC_DRV_DS1307 is not set +# CONFIG_RTC_DRV_DS1374 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_MAX6900 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_X1205 is not set +# CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_PCF8583 is not set +# CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_S35390A is not set +# CONFIG_RTC_DRV_FM3130 is not set + +# +# SPI RTC drivers +# +# CONFIG_RTC_DRV_M41T94 is not set +# CONFIG_RTC_DRV_DS1305 is not set +# CONFIG_RTC_DRV_MAX6902 is not set +# CONFIG_RTC_DRV_R9701 is not set +# CONFIG_RTC_DRV_RS5C348 is not set + +# +# Platform RTC drivers +# +# CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1511 is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# on-CPU RTC drivers +# +# CONFIG_DMADEVICES is not set + +# +# Voltage and Current regulators +# +# CONFIG_REGULATOR is not set +# CONFIG_REGULATOR_FIXED_VOLTAGE is not set +# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set +# CONFIG_REGULATOR_BQ24022 is not set +# CONFIG_UIO is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +# CONFIG_EXT3_FS_XATTR is not set +# CONFIG_EXT4DEV_FS is not set +CONFIG_JBD=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +CONFIG_DNOTIFY=y +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +CONFIG_QUOTA=y +CONFIG_PRINT_QUOTA_WARNING=y +# CONFIG_QFMT_V1 is not set +CONFIG_QFMT_V2=y +CONFIG_QUOTACTL=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_BSD_DISKLABEL is not set +# CONFIG_MINIX_SUBPARTITION is not set +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set +# CONFIG_EFI_PARTITION is not set +# CONFIG_SYSV68_PARTITION is not set +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +CONFIG_NLS_ISO8859_1=y +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 +CONFIG_MAGIC_SYSRQ=y +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_SCHED_DEBUG=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +CONFIG_DEBUG_MUTEXES=y +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_DEBUG_INFO=y +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +CONFIG_FRAME_POINTER=y +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +CONFIG_HAVE_FTRACE=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +# CONFIG_FTRACE is not set +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set +# CONFIG_DEBUG_USER is not set +# CONFIG_DEBUG_ERRORS is not set +# CONFIG_DEBUG_STACK_USAGE is not set +CONFIG_DEBUG_LL=y +# CONFIG_DEBUG_ICEDCC is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_MANAGER=y +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +CONFIG_CRYPTO_ECB=m +# CONFIG_CRYPTO_LRW is not set +CONFIG_CRYPTO_PCBC=m +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_MD4 is not set +CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_LZO is not set +CONFIG_CRYPTO_HW=y + +# +# Library routines +# +CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set +# CONFIG_GENERIC_FIND_NEXT_BIT is not set +CONFIG_CRC_CCITT=y +# CONFIG_CRC16 is not set +CONFIG_CRC_T10DIF=y +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +CONFIG_LIBCRC32C=y +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y -- cgit v1.2.3-70-g09d2 From a468b6484fcd13a24addeb1212538776171b49a6 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Tue, 14 Oct 2008 18:17:53 +0100 Subject: [ARM] 5301/1: ARM: OMAP: Add missing irq defines Some McBSP irq defines were missing that should have been added with the earlier McBSP patches. Add the missing McBSP irqs, and a few other missing irqs as defined in linux-omap tree. Also add a blank line to separate irq defines from the irq line calculations. Signed-off-by: Tony Lindgren Signed-off-by: Russell King --- arch/arm/plat-omap/include/mach/irqs.h | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) (limited to 'arch') diff --git a/arch/arm/plat-omap/include/mach/irqs.h b/arch/arm/plat-omap/include/mach/irqs.h index 9ee04969d36..ed1c1253b66 100644 --- a/arch/arm/plat-omap/include/mach/irqs.h +++ b/arch/arm/plat-omap/include/mach/irqs.h @@ -266,6 +266,8 @@ #define INT_24XX_GPTIMER11 47 #define INT_24XX_GPTIMER12 48 #define INT_24XX_SHA1MD5 51 +#define INT_24XX_MCBSP4_IRQ_TX 54 +#define INT_24XX_MCBSP4_IRQ_RX 55 #define INT_24XX_I2C1_IRQ 56 #define INT_24XX_I2C2_IRQ 57 #define INT_24XX_HDQ_IRQ 58 @@ -284,7 +286,22 @@ #define INT_24XX_USB_IRQ_HGEN 78 #define INT_24XX_USB_IRQ_HSOF 79 #define INT_24XX_USB_IRQ_OTG 80 +#define INT_24XX_MCBSP5_IRQ_TX 81 +#define INT_24XX_MCBSP5_IRQ_RX 82 #define INT_24XX_MMC_IRQ 83 +#define INT_24XX_MMC2_IRQ 86 +#define INT_24XX_MCBSP3_IRQ_TX 89 +#define INT_24XX_MCBSP3_IRQ_RX 90 +#define INT_24XX_SPI3_IRQ 91 + +#define INT_243X_MCBSP2_IRQ 16 +#define INT_243X_MCBSP3_IRQ 17 +#define INT_243X_MCBSP4_IRQ 18 +#define INT_243X_MCBSP5_IRQ 19 +#define INT_243X_MCBSP1_IRQ 64 +#define INT_243X_HS_USB_MC 92 +#define INT_243X_HS_USB_DMA 93 +#define INT_243X_CARKIT_IRQ 94 #define INT_34XX_BENCH_MPU_EMUL 3 #define INT_34XX_ST_MCBSP2_IRQ 4 @@ -321,6 +338,7 @@ #define INT_34XX_PARTHASH_IRQ 79 #define INT_34XX_MMC3_IRQ 94 #define INT_34XX_GPT12_IRQ 95 + /* Max. 128 level 2 IRQs (OMAP1610), 192 GPIOs (OMAP730) and * 16 MPUIO lines */ #define OMAP_MAX_GPIO_LINES 192 -- cgit v1.2.3-70-g09d2 From a5a5b8c527b8d88056d4a63ccac66eb20af8228b Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Tue, 14 Oct 2008 21:54:23 +0100 Subject: [ARM] 5305/1: ARM: OMAP: Fix compile of McBSP by removing unnecessary check Recent McBSP patches changed to allocating devices dynamically and the check for OMAP_MAX_MCBSP_COUNT became unnecessary. The check for OMAP_MAX_MCBSP_COUNT should have been removed with the earlier McBSP patches in devices.c but was accidentally left out. Signed-off-by: Tony Lindgren Signed-off-by: Russell King --- arch/arm/plat-omap/devices.c | 7 ------- 1 file changed, 7 deletions(-) (limited to 'arch') diff --git a/arch/arm/plat-omap/devices.c b/arch/arm/plat-omap/devices.c index 2625ce32e60..a374b945ac1 100644 --- a/arch/arm/plat-omap/devices.c +++ b/arch/arm/plat-omap/devices.c @@ -159,13 +159,6 @@ void omap_mcbsp_register_board_cfg(struct omap_mcbsp_platform_data *config, { int i; - if (size > OMAP_MAX_MCBSP_COUNT) { - printk(KERN_WARNING "Registered too many McBSPs platform_data." - " Using maximum (%d) available.\n", - OMAP_MAX_MCBSP_COUNT); - size = OMAP_MAX_MCBSP_COUNT; - } - omap_mcbsp_devices = kzalloc(size * sizeof(struct platform_device *), GFP_KERNEL); if (!omap_mcbsp_devices) { -- cgit v1.2.3-70-g09d2 From aa59e19d05114f9fb7718d6bc8398255476fb4f5 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Tue, 14 Oct 2008 21:27:27 +0100 Subject: [ARM] 5302/1: ARM: OMAP: Revert omap3 WDT changes to avoid merge conflict With the upcoming WDT patches OMAP_WDT_BASE is no longer needed in devices.c. Revert some earlier omap3 changes to avoid merge conflicts with the WDT patches. Signed-off-by: Tony Lindgren Signed-off-by: Russell King --- arch/arm/plat-omap/devices.c | 11 +---------- 1 file changed, 1 insertion(+), 10 deletions(-) (limited to 'arch') diff --git a/arch/arm/plat-omap/devices.c b/arch/arm/plat-omap/devices.c index a374b945ac1..6467f57a2ac 100644 --- a/arch/arm/plat-omap/devices.c +++ b/arch/arm/plat-omap/devices.c @@ -392,17 +392,8 @@ static inline void omap_init_uwire(void) {} #if defined(CONFIG_OMAP_WATCHDOG) || defined(CONFIG_OMAP_WATCHDOG_MODULE) -#if defined(CONFIG_ARCH_OMAP34XX) -#define OMAP_WDT_BASE 0x48314000 -#elif defined(CONFIG_ARCH_OMAP24XX) - -#ifdef CONFIG_ARCH_OMAP2430 -/* WDT2 */ -#define OMAP_WDT_BASE 0x49016000 -#else +#ifdef CONFIG_ARCH_OMAP24XX #define OMAP_WDT_BASE 0x48022000 -#endif - #else #define OMAP_WDT_BASE 0xfffeb000 #endif -- cgit v1.2.3-70-g09d2