From c33da3a80074094303d643a90ef589330b491270 Mon Sep 17 00:00:00 2001 From: Janusz Krzysztofik Date: Thu, 22 Oct 2009 14:47:42 -0700 Subject: omap1: Fix redundant UARTs pin muxing that can break other hardware support Commit 15ac408ee5a509053a765b816e9179515329369f removed enabled_uart and OMAP_TAG_UART. This works for mach-omap2, but causes issues on mach-omap1 for some boards as the mach-omap1 serial.c was muxing pins based on the enabled_uart flag for 15xx. Fix this by muxing pins in board-*.c files for the 15xx boards for the uart ports that had enabled_uart flag set before the commit above. Tested on Amsdtrad Delta only. Note that in the future we should add support for powering down the uarts with a timer like mach-omap2/serial.c does. Otherwise the enabled uarts will be blocking retention-while-idle. Signed-off-by: Janusz Krzysztofik Signed-off-by: Tony Lindgren --- arch/arm/mach-omap1/board-ams-delta.c | 4 ++++ arch/arm/mach-omap1/board-generic.c | 8 ++++++++ arch/arm/mach-omap1/board-innovator.c | 20 ++++++++++++++++++++ arch/arm/mach-omap1/board-palmte.c | 8 ++++++++ arch/arm/mach-omap1/board-palmtt.c | 8 ++++++++ arch/arm/mach-omap1/board-palmz71.c | 8 ++++++++ arch/arm/mach-omap1/board-sx1.c | 8 ++++++++ arch/arm/mach-omap1/board-voiceblue.c | 8 ++++++++ arch/arm/mach-omap1/serial.c | 26 -------------------------- 9 files changed, 72 insertions(+), 26 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c index 42920f9c1a1..972499e9524 100644 --- a/arch/arm/mach-omap1/board-ams-delta.c +++ b/arch/arm/mach-omap1/board-ams-delta.c @@ -219,6 +219,10 @@ static struct platform_device *ams_delta_devices[] __initdata = { static void __init ams_delta_init(void) { + /* mux pins for uarts */ + omap_cfg_reg(UART1_TX); + omap_cfg_reg(UART1_RTS); + iotable_init(ams_delta_io_desc, ARRAY_SIZE(ams_delta_io_desc)); omap_board_config = ams_delta_config; diff --git a/arch/arm/mach-omap1/board-generic.c b/arch/arm/mach-omap1/board-generic.c index fb47239da72..6c8a41f20e5 100644 --- a/arch/arm/mach-omap1/board-generic.c +++ b/arch/arm/mach-omap1/board-generic.c @@ -64,6 +64,14 @@ static void __init omap_generic_init(void) { #ifdef CONFIG_ARCH_OMAP15XX if (cpu_is_omap15xx()) { + /* mux pins for uarts */ + omap_cfg_reg(UART1_TX); + omap_cfg_reg(UART1_RTS); + omap_cfg_reg(UART2_TX); + omap_cfg_reg(UART2_RTS); + omap_cfg_reg(UART3_TX); + omap_cfg_reg(UART3_RX); + omap_usb_init(&generic1510_usb_config); } #endif diff --git a/arch/arm/mach-omap1/board-innovator.c b/arch/arm/mach-omap1/board-innovator.c index cc2abbb2d0f..cd6c3951482 100644 --- a/arch/arm/mach-omap1/board-innovator.c +++ b/arch/arm/mach-omap1/board-innovator.c @@ -376,6 +376,26 @@ static void __init innovator_init(void) { #ifdef CONFIG_ARCH_OMAP15XX if (cpu_is_omap1510()) { + unsigned char reg; + + /* mux pins for uarts */ + omap_cfg_reg(UART1_TX); + omap_cfg_reg(UART1_RTS); + omap_cfg_reg(UART2_TX); + omap_cfg_reg(UART2_RTS); + omap_cfg_reg(UART3_TX); + omap_cfg_reg(UART3_RX); + + reg = fpga_read(OMAP1510_FPGA_POWER); + reg |= OMAP1510_FPGA_PCR_COM1_EN; + fpga_write(reg, OMAP1510_FPGA_POWER); + udelay(10); + + reg = fpga_read(OMAP1510_FPGA_POWER); + reg |= OMAP1510_FPGA_PCR_COM2_EN; + fpga_write(reg, OMAP1510_FPGA_POWER); + udelay(10); + platform_add_devices(innovator1510_devices, ARRAY_SIZE(innovator1510_devices)); spi_register_board_info(innovator1510_boardinfo, ARRAY_SIZE(innovator1510_boardinfo)); diff --git a/arch/arm/mach-omap1/board-palmte.c b/arch/arm/mach-omap1/board-palmte.c index 90dd0431b0d..4de258420f3 100644 --- a/arch/arm/mach-omap1/board-palmte.c +++ b/arch/arm/mach-omap1/board-palmte.c @@ -342,6 +342,14 @@ static void __init palmte_misc_gpio_setup(void) static void __init omap_palmte_init(void) { + /* mux pins for uarts */ + omap_cfg_reg(UART1_TX); + omap_cfg_reg(UART1_RTS); + omap_cfg_reg(UART2_TX); + omap_cfg_reg(UART2_RTS); + omap_cfg_reg(UART3_TX); + omap_cfg_reg(UART3_RX); + omap_board_config = palmte_config; omap_board_config_size = ARRAY_SIZE(palmte_config); diff --git a/arch/arm/mach-omap1/board-palmtt.c b/arch/arm/mach-omap1/board-palmtt.c index 8256139891f..d972cf941b7 100644 --- a/arch/arm/mach-omap1/board-palmtt.c +++ b/arch/arm/mach-omap1/board-palmtt.c @@ -289,6 +289,14 @@ static void __init omap_mpu_wdt_mode(int mode) { static void __init omap_palmtt_init(void) { + /* mux pins for uarts */ + omap_cfg_reg(UART1_TX); + omap_cfg_reg(UART1_RTS); + omap_cfg_reg(UART2_TX); + omap_cfg_reg(UART2_RTS); + omap_cfg_reg(UART3_TX); + omap_cfg_reg(UART3_RX); + omap_mpu_wdt_mode(0); omap_board_config = palmtt_config; diff --git a/arch/arm/mach-omap1/board-palmz71.c b/arch/arm/mach-omap1/board-palmz71.c index 81b6bde1c5a..986bd4df0e9 100644 --- a/arch/arm/mach-omap1/board-palmz71.c +++ b/arch/arm/mach-omap1/board-palmz71.c @@ -307,6 +307,14 @@ palmz71_gpio_setup(int early) static void __init omap_palmz71_init(void) { + /* mux pins for uarts */ + omap_cfg_reg(UART1_TX); + omap_cfg_reg(UART1_RTS); + omap_cfg_reg(UART2_TX); + omap_cfg_reg(UART2_RTS); + omap_cfg_reg(UART3_TX); + omap_cfg_reg(UART3_RX); + palmz71_gpio_setup(1); omap_mpu_wdt_mode(0); diff --git a/arch/arm/mach-omap1/board-sx1.c b/arch/arm/mach-omap1/board-sx1.c index 02c85ca2e1d..056ae64e0f5 100644 --- a/arch/arm/mach-omap1/board-sx1.c +++ b/arch/arm/mach-omap1/board-sx1.c @@ -377,6 +377,14 @@ static struct omap_board_config_kernel sx1_config[] __initdata = { static void __init omap_sx1_init(void) { + /* mux pins for uarts */ + omap_cfg_reg(UART1_TX); + omap_cfg_reg(UART1_RTS); + omap_cfg_reg(UART2_TX); + omap_cfg_reg(UART2_RTS); + omap_cfg_reg(UART3_TX); + omap_cfg_reg(UART3_RX); + platform_add_devices(sx1_devices, ARRAY_SIZE(sx1_devices)); omap_board_config = sx1_config; diff --git a/arch/arm/mach-omap1/board-voiceblue.c b/arch/arm/mach-omap1/board-voiceblue.c index c06e7a55347..07b07522d5b 100644 --- a/arch/arm/mach-omap1/board-voiceblue.c +++ b/arch/arm/mach-omap1/board-voiceblue.c @@ -152,6 +152,14 @@ static void __init voiceblue_init_irq(void) static void __init voiceblue_init(void) { + /* mux pins for uarts */ + omap_cfg_reg(UART1_TX); + omap_cfg_reg(UART1_RTS); + omap_cfg_reg(UART2_TX); + omap_cfg_reg(UART2_RTS); + omap_cfg_reg(UART3_TX); + omap_cfg_reg(UART3_RX); + /* Watchdog */ gpio_request(0, "Watchdog"); /* smc91x reset */ diff --git a/arch/arm/mach-omap1/serial.c b/arch/arm/mach-omap1/serial.c index d496e50fec4..d23979bc0fd 100644 --- a/arch/arm/mach-omap1/serial.c +++ b/arch/arm/mach-omap1/serial.c @@ -131,8 +131,6 @@ void __init omap_serial_init(void) } for (i = 0; i < OMAP_MAX_NR_PORTS; i++) { - unsigned char reg; - switch (i) { case 0: uart1_ck = clk_get(NULL, "uart1_ck"); @@ -143,16 +141,6 @@ void __init omap_serial_init(void) if (cpu_is_omap15xx()) clk_set_rate(uart1_ck, 12000000); } - if (cpu_is_omap15xx()) { - omap_cfg_reg(UART1_TX); - omap_cfg_reg(UART1_RTS); - if (machine_is_omap_innovator()) { - reg = fpga_read(OMAP1510_FPGA_POWER); - reg |= OMAP1510_FPGA_PCR_COM1_EN; - fpga_write(reg, OMAP1510_FPGA_POWER); - udelay(10); - } - } break; case 1: uart2_ck = clk_get(NULL, "uart2_ck"); @@ -165,16 +153,6 @@ void __init omap_serial_init(void) else clk_set_rate(uart2_ck, 48000000); } - if (cpu_is_omap15xx()) { - omap_cfg_reg(UART2_TX); - omap_cfg_reg(UART2_RTS); - if (machine_is_omap_innovator()) { - reg = fpga_read(OMAP1510_FPGA_POWER); - reg |= OMAP1510_FPGA_PCR_COM2_EN; - fpga_write(reg, OMAP1510_FPGA_POWER); - udelay(10); - } - } break; case 2: uart3_ck = clk_get(NULL, "uart3_ck"); @@ -185,10 +163,6 @@ void __init omap_serial_init(void) if (cpu_is_omap15xx()) clk_set_rate(uart3_ck, 12000000); } - if (cpu_is_omap15xx()) { - omap_cfg_reg(UART3_TX); - omap_cfg_reg(UART3_RX); - } break; } omap_serial_reset(&serial_platform_data[i]); -- cgit v1.2.3-70-g09d2