From 718be4aaf3613cf7c2d097f925abc3d3553c0605 Mon Sep 17 00:00:00 2001 From: Len Brown Date: Thu, 22 Jul 2010 16:54:27 -0400 Subject: ACPI: skip checking BM_STS if the BIOS doesn't ask for it It turns out that there is a bit in the _CST for Intel FFH C3 that tells the OS if we should be checking BM_STS or not. Linux has been unconditionally checking BM_STS. If the chip-set is configured to enable BM_STS, it can retard or completely prevent entry into deep C-states -- as illustrated by turbostat: http://userweb.kernel.org/~lenb/acpi/utils/pmtools/turbostat/ ref: Intel Processor Vendor-Specific ACPI Interface Specification table 4 "_CST FFH GAS Field Encoding" Bit 1: Set to 1 if OSPM should use Bus Master avoidance for this C-state https://bugzilla.kernel.org/show_bug.cgi?id=15886 Signed-off-by: Len Brown --- arch/x86/kernel/acpi/cstate.c | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'arch') diff --git a/arch/x86/kernel/acpi/cstate.c b/arch/x86/kernel/acpi/cstate.c index 2e837f5080f..fb7a5f052e2 100644 --- a/arch/x86/kernel/acpi/cstate.c +++ b/arch/x86/kernel/acpi/cstate.c @@ -145,6 +145,15 @@ int acpi_processor_ffh_cstate_probe(unsigned int cpu, percpu_entry->states[cx->index].eax = cx->address; percpu_entry->states[cx->index].ecx = MWAIT_ECX_INTERRUPT_BREAK; } + + /* + * For _CST FFH on Intel, if GAS.access_size bit 1 is cleared, + * then we should skip checking BM_STS for this C-state. + * ref: "Intel Processor Vendor-Specific ACPI Interface Specification" + */ + if ((c->x86_vendor == X86_VENDOR_INTEL) && !(reg->access_size & 0x2)) + cx->bm_sts_skip = 1; + return retval; } EXPORT_SYMBOL_GPL(acpi_processor_ffh_cstate_probe); -- cgit v1.2.3-70-g09d2 From 72ad5d77fb981963edae15eee8196c80238f5ed0 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Fri, 23 Jul 2010 22:59:09 +0200 Subject: ACPI / Sleep: Allow the NVS saving to be skipped during suspend to RAM Commit 2a6b69765ad794389f2fc3e14a0afa1a995221c2 (ACPI: Store NVS state even when entering suspend to RAM) caused the ACPI suspend code save the NVS area during suspend and restore it during resume unconditionally, although it is known that some systems need to use acpi_sleep=s4_nonvs for hibernation to work. To allow the affected systems to avoid saving and restoring the NVS area during suspend to RAM and resume, introduce kernel command line option acpi_sleep=nonvs and make acpi_sleep=s4_nonvs work as its alias temporarily (add acpi_sleep=s4_nonvs to the feature removal file). Addresses https://bugzilla.kernel.org/show_bug.cgi?id=16396 . Signed-off-by: Rafael J. Wysocki Reported-and-tested-by: tomas m Signed-off-by: Len Brown --- Documentation/feature-removal-schedule.txt | 7 ++++++ Documentation/kernel-parameters.txt | 4 ++-- arch/x86/kernel/acpi/sleep.c | 9 ++++++-- drivers/acpi/sleep.c | 35 +++++++++++++++--------------- include/linux/acpi.h | 2 +- 5 files changed, 34 insertions(+), 23 deletions(-) (limited to 'arch') diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt index c268783bc4e..1571c0c83db 100644 --- a/Documentation/feature-removal-schedule.txt +++ b/Documentation/feature-removal-schedule.txt @@ -647,3 +647,10 @@ Who: Stefan Richter ---------------------------- +What: The acpi_sleep=s4_nonvs command line option +When: 2.6.37 +Files: arch/x86/kernel/acpi/sleep.c +Why: superseded by acpi_sleep=nonvs +Who: Rafael J. Wysocki + +---------------------------- diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index 4ddb58df081..2b2407d9a6d 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -254,8 +254,8 @@ and is between 256 and 4096 characters. It is defined in the file control method, with respect to putting devices into low power states, to be enforced (the ACPI 2.0 ordering of _PTS is used by default). - s4_nonvs prevents the kernel from saving/restoring the - ACPI NVS memory during hibernation. + nonvs prevents the kernel from saving/restoring the + ACPI NVS memory during suspend/hibernation and resume. sci_force_enable causes the kernel to set SCI_EN directly on resume from S1/S3 (which is against the ACPI spec, but some broken systems don't work without it). diff --git a/arch/x86/kernel/acpi/sleep.c b/arch/x86/kernel/acpi/sleep.c index 82e508677b9..fcc3c61fdec 100644 --- a/arch/x86/kernel/acpi/sleep.c +++ b/arch/x86/kernel/acpi/sleep.c @@ -157,9 +157,14 @@ static int __init acpi_sleep_setup(char *str) #ifdef CONFIG_HIBERNATION if (strncmp(str, "s4_nohwsig", 10) == 0) acpi_no_s4_hw_signature(); - if (strncmp(str, "s4_nonvs", 8) == 0) - acpi_s4_no_nvs(); + if (strncmp(str, "s4_nonvs", 8) == 0) { + pr_warning("ACPI: acpi_sleep=s4_nonvs is deprecated, " + "please use acpi_sleep=nonvs instead"); + acpi_nvs_nosave(); + } #endif + if (strncmp(str, "nonvs", 5) == 0) + acpi_nvs_nosave(); if (strncmp(str, "old_ordering", 12) == 0) acpi_old_suspend_ordering(); str = strchr(str, ','); diff --git a/drivers/acpi/sleep.c b/drivers/acpi/sleep.c index 5b7c52e4a00..2862c781b37 100644 --- a/drivers/acpi/sleep.c +++ b/drivers/acpi/sleep.c @@ -81,6 +81,20 @@ static int acpi_sleep_prepare(u32 acpi_state) #ifdef CONFIG_ACPI_SLEEP static u32 acpi_target_sleep_state = ACPI_STATE_S0; +/* + * The ACPI specification wants us to save NVS memory regions during hibernation + * and to restore them during the subsequent resume. Windows does that also for + * suspend to RAM. However, it is known that this mechanism does not work on + * all machines, so we allow the user to disable it with the help of the + * 'acpi_sleep=nonvs' kernel command line option. + */ +static bool nvs_nosave; + +void __init acpi_nvs_nosave(void) +{ + nvs_nosave = true; +} + /* * ACPI 1.0 wants us to execute _PTS before suspending devices, so we allow the * user to request that behavior by using the 'acpi_old_suspend_ordering' @@ -197,8 +211,7 @@ static int acpi_suspend_begin(suspend_state_t pm_state) u32 acpi_state = acpi_suspend_states[pm_state]; int error = 0; - error = suspend_nvs_alloc(); - + error = nvs_nosave ? 0 : suspend_nvs_alloc(); if (error) return error; @@ -388,20 +401,6 @@ static struct dmi_system_id __initdata acpisleep_dmi_table[] = { #endif /* CONFIG_SUSPEND */ #ifdef CONFIG_HIBERNATION -/* - * The ACPI specification wants us to save NVS memory regions during hibernation - * and to restore them during the subsequent resume. However, it is not certain - * if this mechanism is going to work on all machines, so we allow the user to - * disable this mechanism using the 'acpi_sleep=s4_nonvs' kernel command line - * option. - */ -static bool s4_no_nvs; - -void __init acpi_s4_no_nvs(void) -{ - s4_no_nvs = true; -} - static unsigned long s4_hardware_signature; static struct acpi_table_facs *facs; static bool nosigcheck; @@ -415,7 +414,7 @@ static int acpi_hibernation_begin(void) { int error; - error = s4_no_nvs ? 0 : suspend_nvs_alloc(); + error = nvs_nosave ? 0 : suspend_nvs_alloc(); if (!error) { acpi_target_sleep_state = ACPI_STATE_S4; acpi_sleep_tts_switch(acpi_target_sleep_state); @@ -510,7 +509,7 @@ static int acpi_hibernation_begin_old(void) error = acpi_sleep_prepare(ACPI_STATE_S4); if (!error) { - if (!s4_no_nvs) + if (!nvs_nosave) error = suspend_nvs_alloc(); if (!error) acpi_target_sleep_state = ACPI_STATE_S4; diff --git a/include/linux/acpi.h b/include/linux/acpi.h index 224a38c960d..ccf94dc5acd 100644 --- a/include/linux/acpi.h +++ b/include/linux/acpi.h @@ -253,7 +253,7 @@ int acpi_resources_are_enforced(void); #ifdef CONFIG_PM_SLEEP void __init acpi_no_s4_hw_signature(void); void __init acpi_old_suspend_ordering(void); -void __init acpi_s4_no_nvs(void); +void __init acpi_nvs_nosave(void); #endif /* CONFIG_PM_SLEEP */ struct acpi_osc_context { -- cgit v1.2.3-70-g09d2