From bfe75c7e67e5f32bf446a48e0502d06d25b51752 Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Fri, 13 Jan 2012 16:27:38 +0900
Subject: sh: Defer to asm-generic/device.h.

Now that the hwblk use cases have been ripped out, we can revert to
asm-generic/device.h for the device/platform device arch data structures.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/include/asm/device.h | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

(limited to 'arch')

diff --git a/arch/sh/include/asm/device.h b/arch/sh/include/asm/device.h
index a1c9c0daec1..071bcb4d4bf 100644
--- a/arch/sh/include/asm/device.h
+++ b/arch/sh/include/asm/device.h
@@ -3,9 +3,10 @@
  *
  * This file is released under the GPLv2
  */
+#ifndef __ASM_SH_DEVICE_H
+#define __ASM_SH_DEVICE_H
 
-struct dev_archdata {
-};
+#include <asm-generic/device.h>
 
 struct platform_device;
 /* allocate contiguous memory chunk and fill in struct resource */
@@ -14,5 +15,4 @@ int platform_resource_setup_memory(struct platform_device *pdev,
 
 void plat_early_device_setup(void);
 
-struct pdev_archdata {
-};
+#endif /* __ASM_SH_DEVICE_H */
-- 
cgit v1.2.3-70-g09d2


From 78da107a7ed14fbc6ef77ff4c41d92b11edc9036 Mon Sep 17 00:00:00 2001
From: "Shimoda, Yoshihiro" <yoshihiro.shimoda.uh@renesas.com>
Date: Tue, 17 Jan 2012 17:49:38 +0900
Subject: sh: fix the sh_mmcif_plat_data in board-sh7757lcr

The board has an eMMC chip, so we cannot remove the chip.
In this case, we have to set the MMC_CAP_NONREMOVABLE to the caps
parameter.

Reported-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/boards/board-sh7757lcr.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/sh/boards/board-sh7757lcr.c b/arch/sh/boards/board-sh7757lcr.c
index 0838154dd21..33dc5b6e8e1 100644
--- a/arch/sh/boards/board-sh7757lcr.c
+++ b/arch/sh/boards/board-sh7757lcr.c
@@ -222,7 +222,8 @@ static struct sh_mmcif_dma sh7757lcr_mmcif_dma = {
 static struct sh_mmcif_plat_data sh_mmcif_plat = {
 	.dma		= &sh7757lcr_mmcif_dma,
 	.sup_pclk	= 0x0f,
-	.caps		= MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
+	.caps		= MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA |
+			  MMC_CAP_NONREMOVABLE,
 	.ocr		= MMC_VDD_32_33 | MMC_VDD_33_34,
 };
 
-- 
cgit v1.2.3-70-g09d2


From 0df1a838d678fc6ab49f983a19e905f6a42297a0 Mon Sep 17 00:00:00 2001
From: Magnus Damm <damm@opensource.se>
Date: Tue, 17 Jan 2012 20:05:40 +0900
Subject: ARM: mach-shmobile: sh73a0 PINT IRQ base fix

Bump up the sh73a0 PINT IRQ base from 768 to 800 to avoid
collision with INTCS vectors for IRQ16->IRQ32 at 0x3xxx.

Without this fix the sh73a0 IRQ pin handling code collides
with the PINT code which results in hangs on Kota2 during boot.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/arm/mach-shmobile/include/mach/sh73a0.h | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-shmobile/include/mach/sh73a0.h b/arch/arm/mach-shmobile/include/mach/sh73a0.h
index 881d515a968..cad57578cee 100644
--- a/arch/arm/mach-shmobile/include/mach/sh73a0.h
+++ b/arch/arm/mach-shmobile/include/mach/sh73a0.h
@@ -515,8 +515,8 @@ enum {
 	SHDMA_SLAVE_MMCIF_RX,
 };
 
-/* PINT interrupts are located at Linux IRQ 768 and up */
-#define SH73A0_PINT0_IRQ(irq) ((irq) + 768)
-#define SH73A0_PINT1_IRQ(irq) ((irq) + 800)
+/* PINT interrupts are located at Linux IRQ 800 and up */
+#define SH73A0_PINT0_IRQ(irq) ((irq) + 800)
+#define SH73A0_PINT1_IRQ(irq) ((irq) + 832)
 
 #endif /* __ASM_SH73A0_H__ */
-- 
cgit v1.2.3-70-g09d2


From e2c31b3fdd48274e9deb450e21279e54dfa02ccd Mon Sep 17 00:00:00 2001
From: Magnus Damm <damm@opensource.se>
Date: Tue, 17 Jan 2012 20:10:49 +0900
Subject: ARM: mach-shmobile: sh73a0 IRQ sparse alloc fix

Fix the sh73a0 external IRQ pin code to properly support
CONFIG_SPARSE_IRQ=y by allocating IRQ descriptors for the
cascaded IRQs associated with external IRQ pins.

Without this fix it is impossible to request IRQ0->IRQ31
on the Kota2 board when sparse IRQs are enabled.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/arm/mach-shmobile/intc-sh73a0.c | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-shmobile/intc-sh73a0.c b/arch/arm/mach-shmobile/intc-sh73a0.c
index 1eda6b0b69e..9857595eaa7 100644
--- a/arch/arm/mach-shmobile/intc-sh73a0.c
+++ b/arch/arm/mach-shmobile/intc-sh73a0.c
@@ -19,6 +19,7 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/interrupt.h>
+#include <linux/module.h>
 #include <linux/irq.h>
 #include <linux/io.h>
 #include <linux/sh_intc.h>
@@ -445,6 +446,7 @@ void __init sh73a0_init_irq(void)
 		setup_irq(gic_spi(1 + k), &sh73a0_irq_pin_cascade[k]);
 
 		n = intcs_evt2irq(to_intc_vect(gic_spi(1 + k)));
+		WARN_ON(irq_alloc_desc_at(n, numa_node_id()) != n);
 		irq_set_chip_and_handler_name(n, &intca_gic_irq_chip,
 					      handle_level_irq, "level");
 		set_irq_flags(n, IRQF_VALID); /* yuck */
-- 
cgit v1.2.3-70-g09d2


From 2fde109c2d79e9791250a5d212c13055e9216a55 Mon Sep 17 00:00:00 2001
From: Magnus Damm <damm@opensource.se>
Date: Tue, 17 Jan 2012 20:14:07 +0900
Subject: ARM: mach-shmobile: IRQ driven GPIO key support for Kota2

Now when GPIO IRQs are supported on sh73a0 modify the Kota2
board code to switch from the polled "gpio-keys-polled" driver
to the IRQ driven "gpio-keys" driver.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/arm/mach-shmobile/board-kota2.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-shmobile/board-kota2.c b/arch/arm/mach-shmobile/board-kota2.c
index 857ceeec1bb..c8e7ca23fc0 100644
--- a/arch/arm/mach-shmobile/board-kota2.c
+++ b/arch/arm/mach-shmobile/board-kota2.c
@@ -143,11 +143,10 @@ static struct gpio_keys_button gpio_buttons[] = {
 static struct gpio_keys_platform_data gpio_key_info = {
 	.buttons        = gpio_buttons,
 	.nbuttons       = ARRAY_SIZE(gpio_buttons),
-	.poll_interval  = 250, /* polled for now */
 };
 
 static struct platform_device gpio_keys_device = {
-	.name   = "gpio-keys-polled", /* polled for now */
+	.name   = "gpio-keys",
 	.id     = -1,
 	.dev    = {
 		.platform_data  = &gpio_key_info,
-- 
cgit v1.2.3-70-g09d2


From d5bb386d70c8e8e79c7f652a794610e01d79f33e Mon Sep 17 00:00:00 2001
From: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Date: Tue, 30 Aug 2011 18:26:44 +0200
Subject: ARM: mach-shmobile: simplify MMCIF DMA configuration

Use the simplified method to specify MMCIF DMA slave configuration.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/arm/mach-shmobile/board-ag5evm.c   | 11 ++---------
 arch/arm/mach-shmobile/board-ap4evb.c   | 12 ++----------
 arch/arm/mach-shmobile/board-mackerel.c | 12 ++----------
 3 files changed, 6 insertions(+), 29 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-shmobile/board-ag5evm.c b/arch/arm/mach-shmobile/board-ag5evm.c
index eff8a96c75e..729eaee5a15 100644
--- a/arch/arm/mach-shmobile/board-ag5evm.c
+++ b/arch/arm/mach-shmobile/board-ag5evm.c
@@ -159,19 +159,12 @@ static struct resource sh_mmcif_resources[] = {
 	},
 };
 
-static struct sh_mmcif_dma sh_mmcif_dma = {
-	.chan_priv_rx	= {
-		.slave_id	= SHDMA_SLAVE_MMCIF_RX,
-	},
-	.chan_priv_tx	= {
-		.slave_id	= SHDMA_SLAVE_MMCIF_TX,
-	},
-};
 static struct sh_mmcif_plat_data sh_mmcif_platdata = {
 	.sup_pclk	= 0,
 	.ocr		= MMC_VDD_165_195,
 	.caps		= MMC_CAP_8_BIT_DATA | MMC_CAP_NONREMOVABLE,
-	.dma		= &sh_mmcif_dma,
+	.slave_id_tx	= SHDMA_SLAVE_MMCIF_TX,
+	.slave_id_rx	= SHDMA_SLAVE_MMCIF_RX,
 };
 
 static struct platform_device mmc_device = {
diff --git a/arch/arm/mach-shmobile/board-ap4evb.c b/arch/arm/mach-shmobile/board-ap4evb.c
index aab0a349f75..eeb4d966458 100644
--- a/arch/arm/mach-shmobile/board-ap4evb.c
+++ b/arch/arm/mach-shmobile/board-ap4evb.c
@@ -295,15 +295,6 @@ static struct resource sh_mmcif_resources[] = {
 	},
 };
 
-static struct sh_mmcif_dma sh_mmcif_dma = {
-	.chan_priv_rx	= {
-		.slave_id	= SHDMA_SLAVE_MMCIF_RX,
-	},
-	.chan_priv_tx	= {
-		.slave_id	= SHDMA_SLAVE_MMCIF_TX,
-	},
-};
-
 static struct sh_mmcif_plat_data sh_mmcif_plat = {
 	.sup_pclk	= 0,
 	.ocr		= MMC_VDD_165_195 | MMC_VDD_32_33 | MMC_VDD_33_34,
@@ -311,7 +302,8 @@ static struct sh_mmcif_plat_data sh_mmcif_plat = {
 			  MMC_CAP_8_BIT_DATA |
 			  MMC_CAP_NEEDS_POLL,
 	.get_cd		= slot_cn7_get_cd,
-	.dma		= &sh_mmcif_dma,
+	.slave_id_tx	= SHDMA_SLAVE_MMCIF_TX,
+	.slave_id_rx	= SHDMA_SLAVE_MMCIF_RX,
 };
 
 static struct platform_device sh_mmcif_device = {
diff --git a/arch/arm/mach-shmobile/board-mackerel.c b/arch/arm/mach-shmobile/board-mackerel.c
index 9b42fbd10f8..1a955e2a334 100644
--- a/arch/arm/mach-shmobile/board-mackerel.c
+++ b/arch/arm/mach-shmobile/board-mackerel.c
@@ -1184,15 +1184,6 @@ static struct resource sh_mmcif_resources[] = {
 	},
 };
 
-static struct sh_mmcif_dma sh_mmcif_dma = {
-	.chan_priv_rx	= {
-		.slave_id	= SHDMA_SLAVE_MMCIF_RX,
-	},
-	.chan_priv_tx	= {
-		.slave_id	= SHDMA_SLAVE_MMCIF_TX,
-	},
-};
-
 static struct sh_mmcif_plat_data sh_mmcif_plat = {
 	.sup_pclk	= 0,
 	.ocr		= MMC_VDD_165_195 | MMC_VDD_32_33 | MMC_VDD_33_34,
@@ -1200,7 +1191,8 @@ static struct sh_mmcif_plat_data sh_mmcif_plat = {
 			  MMC_CAP_8_BIT_DATA |
 			  MMC_CAP_NEEDS_POLL,
 	.get_cd		= slot_cn7_get_cd,
-	.dma		= &sh_mmcif_dma,
+	.slave_id_tx	= SHDMA_SLAVE_MMCIF_TX,
+	.slave_id_rx	= SHDMA_SLAVE_MMCIF_RX,
 };
 
 static struct platform_device sh_mmcif_device = {
-- 
cgit v1.2.3-70-g09d2


From 482835ce02726652becc36b64522cbabc0adbeee Mon Sep 17 00:00:00 2001
From: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Date: Wed, 18 Jan 2012 10:24:17 +0100
Subject: sh: sh7757lcr: update to the new MMCIF DMA configuration

Specifying MMCIF DMA slave IDs via a struct sh_mmcif_dma instance is
deprecated. Update sh7757lcr to specify slave IDs embedded in
struct sh_mmcif_plat_data.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/boards/board-sh7757lcr.c | 12 ++----------
 1 file changed, 2 insertions(+), 10 deletions(-)

(limited to 'arch')

diff --git a/arch/sh/boards/board-sh7757lcr.c b/arch/sh/boards/board-sh7757lcr.c
index 33dc5b6e8e1..8d2ae109a83 100644
--- a/arch/sh/boards/board-sh7757lcr.c
+++ b/arch/sh/boards/board-sh7757lcr.c
@@ -210,21 +210,13 @@ static struct resource sh_mmcif_resources[] = {
 	},
 };
 
-static struct sh_mmcif_dma sh7757lcr_mmcif_dma = {
-	.chan_priv_tx	= {
-		.slave_id = SHDMA_SLAVE_MMCIF_TX,
-	},
-	.chan_priv_rx	= {
-		.slave_id = SHDMA_SLAVE_MMCIF_RX,
-	}
-};
-
 static struct sh_mmcif_plat_data sh_mmcif_plat = {
-	.dma		= &sh7757lcr_mmcif_dma,
 	.sup_pclk	= 0x0f,
 	.caps		= MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA |
 			  MMC_CAP_NONREMOVABLE,
 	.ocr		= MMC_VDD_32_33 | MMC_VDD_33_34,
+	.slave_id_tx	= SHDMA_SLAVE_MMCIF_TX,
+	.slave_id_rx	= SHDMA_SLAVE_MMCIF_RX,
 };
 
 static struct platform_device sh_mmcif_device = {
-- 
cgit v1.2.3-70-g09d2


From 833218f16b1fbfdff0dbb9ac477cf0c6e85cd4f5 Mon Sep 17 00:00:00 2001
From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Date: Wed, 18 Jan 2012 01:44:22 -0800
Subject: sh: clock-sh7724: fixup sh_fsi clock settings

sh_fsi needs HWBLK_SPU clock on sh7724

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/kernel/cpu/sh4a/clock-sh7724.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7724.c b/arch/sh/kernel/cpu/sh4a/clock-sh7724.c
index b3c039a5064..70bd96646f4 100644
--- a/arch/sh/kernel/cpu/sh4a/clock-sh7724.c
+++ b/arch/sh/kernel/cpu/sh4a/clock-sh7724.c
@@ -343,7 +343,7 @@ static struct clk_lookup lookups[] = {
 	CLKDEV_DEV_ID("sh_mobile_ceu.1", &mstp_clks[HWBLK_CEU1]),
 	CLKDEV_CON_ID("beu1", &mstp_clks[HWBLK_BEU1]),
 	CLKDEV_CON_ID("2ddmac0", &mstp_clks[HWBLK_2DDMAC]),
-	CLKDEV_CON_ID("spu0", &mstp_clks[HWBLK_SPU]),
+	CLKDEV_DEV_ID("sh_fsi.0", &mstp_clks[HWBLK_SPU]),
 	CLKDEV_CON_ID("jpu0", &mstp_clks[HWBLK_JPU]),
 	CLKDEV_DEV_ID("sh-vou.0", &mstp_clks[HWBLK_VOU]),
 	CLKDEV_CON_ID("beu0", &mstp_clks[HWBLK_BEU0]),
-- 
cgit v1.2.3-70-g09d2


From 0ada2da51800a4914887a9bcf22d563be80e50be Mon Sep 17 00:00:00 2001
From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Date: Wed, 18 Jan 2012 17:32:05 -0800
Subject: ARM: mach-shmobile: mackerel: use renesas_usbhs instead of
 r8a66597_hcd

Current renesas_usbhs driver can use both USB host/gadget.
This patch removes current r8a66597_hcd driver settings,
and adds renesas_usbhs host driver settings for mackerel USB1 port.
You can still use this port as "gadget" with small modify.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/arm/mach-shmobile/board-mackerel.c | 73 ++++-----------------------------
 1 file changed, 9 insertions(+), 64 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-shmobile/board-mackerel.c b/arch/arm/mach-shmobile/board-mackerel.c
index 9b42fbd10f8..f0cc307df64 100644
--- a/arch/arm/mach-shmobile/board-mackerel.c
+++ b/arch/arm/mach-shmobile/board-mackerel.c
@@ -43,7 +43,6 @@
 #include <linux/smsc911x.h>
 #include <linux/sh_intc.h>
 #include <linux/tca6416_keypad.h>
-#include <linux/usb/r8a66597.h>
 #include <linux/usb/renesas_usbhs.h>
 #include <linux/dma-mapping.h>
 
@@ -145,11 +144,6 @@
  * 1-2 short | VBUS 5V       | Host
  * open      | external VBUS | Function
  *
- * *1
- * CN31 is used as
- * CONFIG_USB_R8A66597_HCD	Host
- * CONFIG_USB_RENESAS_USBHS	Function
- *
  * CAUTION
  *
  * renesas_usbhs driver can use external interrupt mode
@@ -161,15 +155,6 @@
  * mackerel can not use external interrupt (IRQ7-PORT167) mode on "USB0",
  * because Touchscreen is using IRQ7-PORT40.
  * It is impossible to use IRQ7 demux on this board.
- *
- * We can use external interrupt mode USB-Function on "USB1".
- * USB1 can become Host by r8a66597, and become Function by renesas_usbhs.
- * But don't select both drivers in same time.
- * These uses same IRQ number for request_irq(), and aren't supporting
- * IRQF_SHARED / IORESOURCE_IRQ_SHAREABLE.
- *
- * Actually these are old/new version of USB driver.
- * This mean its register will be broken if it supports shared IRQ,
  */
 
 /*
@@ -676,51 +661,16 @@ static struct platform_device usbhs0_device = {
  * Use J30 to select between Host and Function. This setting
  * can however not be detected by software. Hotplug of USBHS1
  * is provided via IRQ8.
+ *
+ * Current USB1 works as "USB Host".
+ *  - set J30 "short"
+ *
+ * If you want to use it as "USB gadget",
+ *  - J30 "open"
+ *  - modify usbhs1_get_id() USBHS_HOST -> USBHS_GADGET
+ *  - add .get_vbus = usbhs_get_vbus in usbhs1_private
  */
 #define IRQ8 evt2irq(0x0300)
-
-/* USBHS1 USB Host support via r8a66597_hcd */
-static void usb1_host_port_power(int port, int power)
-{
-	if (!power) /* only power-on is supported for now */
-		return;
-
-	/* set VBOUT/PWEN and EXTLP1 in DVSTCTR */
-	__raw_writew(__raw_readw(0xE68B0008) | 0x600, 0xE68B0008);
-}
-
-static struct r8a66597_platdata usb1_host_data = {
-	.on_chip	= 1,
-	.port_power	= usb1_host_port_power,
-};
-
-static struct resource usb1_host_resources[] = {
-	[0] = {
-		.name	= "USBHS1",
-		.start	= 0xe68b0000,
-		.end	= 0xe68b00e6 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= evt2irq(0x1ce0) /* USB1_USB1I0 */,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device usb1_host_device = {
-	.name	= "r8a66597_hcd",
-	.id	= 1,
-	.dev = {
-		.dma_mask		= NULL,         /*  not use dma */
-		.coherent_dma_mask	= 0xffffffff,
-		.platform_data		= &usb1_host_data,
-	},
-	.num_resources	= ARRAY_SIZE(usb1_host_resources),
-	.resource	= usb1_host_resources,
-};
-
-/* USBHS1 USB Function support via renesas_usbhs */
-
 #define USB_PHY_MODE		(1 << 4)
 #define USB_PHY_INT_EN		((1 << 3) | (1 << 2))
 #define USB_PHY_ON		(1 << 1)
@@ -776,7 +726,7 @@ static void usbhs1_hardware_exit(struct platform_device *pdev)
 
 static int usbhs1_get_id(struct platform_device *pdev)
 {
-	return USBHS_GADGET;
+	return USBHS_HOST;
 }
 
 static u32 usbhs1_pipe_cfg[] = {
@@ -807,7 +757,6 @@ static struct usbhs_private usbhs1_private = {
 			.hardware_exit	= usbhs1_hardware_exit,
 			.get_id		= usbhs1_get_id,
 			.phy_reset	= usbhs_phy_reset,
-			.get_vbus	= usbhs_get_vbus,
 		},
 		.driver_param = {
 			.buswait_bwait	= 4,
@@ -1311,7 +1260,6 @@ static struct platform_device *mackerel_devices[] __initdata = {
 	&nor_flash_device,
 	&smc911x_device,
 	&lcdc_device,
-	&usb1_host_device,
 	&usbhs1_device,
 	&usbhs0_device,
 	&leds_device,
@@ -1473,9 +1421,6 @@ static void __init mackerel_init(void)
 	gpio_pull_down(GPIO_PORT167CR); /* VBUS0_1 pull down */
 	gpio_request(GPIO_FN_IDIN_1_113, NULL);
 
-	/* USB phy tweak to make the r8a66597_hcd host driver work */
-	__raw_writew(0x8a0a, 0xe6058130);       /* USBCR4 */
-
 	/* enable FSI2 port A (ak4643) */
 	gpio_request(GPIO_FN_FSIAIBT,	NULL);
 	gpio_request(GPIO_FN_FSIAILR,	NULL);
-- 
cgit v1.2.3-70-g09d2


From 6d9b7dd0da1b619ed5f89ff7ab4bc3188c0f7e9f Mon Sep 17 00:00:00 2001
From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Date: Wed, 18 Jan 2012 16:37:07 -0800
Subject: ARM: mach-shmobile: mackerel: add ak4642 amixer settings on comment

current ak4642 needs amixer settings for playing which was not
needed on old kernel.
This patch show it on comment area

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/arm/mach-shmobile/board-mackerel.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-shmobile/board-mackerel.c b/arch/arm/mach-shmobile/board-mackerel.c
index f0cc307df64..c4a6a9b16d1 100644
--- a/arch/arm/mach-shmobile/board-mackerel.c
+++ b/arch/arm/mach-shmobile/board-mackerel.c
@@ -192,6 +192,16 @@
  *
  */
 
+/*
+ * FSI - AK4642
+ *
+ * it needs amixer settings for playing
+ *
+ * amixer set "Headphone" on
+ * amixer set "HPOUTL Mixer DACH" on
+ * amixer set "HPOUTR Mixer DACH" on
+ */
+
 /*
  * FIXME !!
  *
-- 
cgit v1.2.3-70-g09d2


From 04f47a03c51c9f02fa27b0ecf4207e25c0741804 Mon Sep 17 00:00:00 2001
From: Paul Gortmaker <paul.gortmaker@windriver.com>
Date: Sun, 22 Jan 2012 14:57:25 -0500
Subject: arm: fix compile failure in mach-shmobile/board-ag5evm.c

Add videodev2 header which provides V4L2_PIX_FMT_RGB565 to fix:

arch/arm/mach-shmobile/board-ag5evm.c:274: error: 'V4L2_PIX_FMT_RGB565' undeclared here (not in a function)

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/arm/mach-shmobile/board-ag5evm.c | 1 +
 1 file changed, 1 insertion(+)

(limited to 'arch')

diff --git a/arch/arm/mach-shmobile/board-ag5evm.c b/arch/arm/mach-shmobile/board-ag5evm.c
index a4e6ca04e31..75596948029 100644
--- a/arch/arm/mach-shmobile/board-ag5evm.c
+++ b/arch/arm/mach-shmobile/board-ag5evm.c
@@ -30,6 +30,7 @@
 #include <linux/serial_sci.h>
 #include <linux/smsc911x.h>
 #include <linux/gpio.h>
+#include <linux/videodev2.h>
 #include <linux/input.h>
 #include <linux/input/sh_keysc.h>
 #include <linux/mmc/host.h>
-- 
cgit v1.2.3-70-g09d2


From f5948bac5f22e7697fc782e45bdca20a27368512 Mon Sep 17 00:00:00 2001
From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Date: Sun, 22 Jan 2012 21:10:02 -0800
Subject: ARM: mach-shmobile: clock-sh73a0: add DSIxPHY clock support

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/arm/mach-shmobile/board-ag5evm.c |  16 +++--
 arch/arm/mach-shmobile/clock-sh73a0.c | 113 ++++++++++++++++++++++++++++++++++
 2 files changed, 125 insertions(+), 4 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-shmobile/board-ag5evm.c b/arch/arm/mach-shmobile/board-ag5evm.c
index 729eaee5a15..2e1334f5699 100644
--- a/arch/arm/mach-shmobile/board-ag5evm.c
+++ b/arch/arm/mach-shmobile/board-ag5evm.c
@@ -314,12 +314,11 @@ static struct resource mipidsi0_resources[] = {
 	},
 };
 
-#define DSI0PHYCR	0xe615006c
 static int sh_mipi_set_dot_clock(struct platform_device *pdev,
 				 void __iomem *base,
 				 int enable)
 {
-	struct clk *pck;
+	struct clk *pck, *phy;
 	int ret;
 
 	pck = clk_get(&pdev->dev, "dsip_clk");
@@ -328,18 +327,27 @@ static int sh_mipi_set_dot_clock(struct platform_device *pdev,
 		goto sh_mipi_set_dot_clock_pck_err;
 	}
 
+	phy = clk_get(&pdev->dev, "dsiphy_clk");
+	if (IS_ERR(phy)) {
+		ret = PTR_ERR(phy);
+		goto sh_mipi_set_dot_clock_phy_err;
+	}
+
 	if (enable) {
 		clk_set_rate(pck, clk_round_rate(pck,  24000000));
-		__raw_writel(0x2a809010, DSI0PHYCR);
+		clk_set_rate(phy, clk_round_rate(pck, 510000000));
 		clk_enable(pck);
+		clk_enable(phy);
 	} else {
 		clk_disable(pck);
+		clk_disable(phy);
 	}
 
 	ret = 0;
 
+	clk_put(phy);
+sh_mipi_set_dot_clock_phy_err:
 	clk_put(pck);
-
 sh_mipi_set_dot_clock_pck_err:
 	return ret;
 }
diff --git a/arch/arm/mach-shmobile/clock-sh73a0.c b/arch/arm/mach-shmobile/clock-sh73a0.c
index afbead6a6e1..7727cca6136 100644
--- a/arch/arm/mach-shmobile/clock-sh73a0.c
+++ b/arch/arm/mach-shmobile/clock-sh73a0.c
@@ -365,6 +365,114 @@ static struct clk div6_clks[DIV6_NR] = {
 			dsi_parent, ARRAY_SIZE(dsi_parent), 12, 3),
 };
 
+/* DSI DIV */
+static unsigned long dsiphy_recalc(struct clk *clk)
+{
+	u32 value;
+
+	value = __raw_readl(clk->mapping->base);
+
+	/* FIXME */
+	if (!(value & 0x000B8000))
+		return clk->parent->rate;
+
+	value &= 0x3f;
+	value += 1;
+
+	if ((value < 12) ||
+	    (value > 33)) {
+		pr_err("DSIPHY has wrong value (%d)", value);
+		return 0;
+	}
+
+	return clk->parent->rate / value;
+}
+
+static long dsiphy_round_rate(struct clk *clk, unsigned long rate)
+{
+	return clk_rate_mult_range_round(clk, 12, 33, rate);
+}
+
+static void dsiphy_disable(struct clk *clk)
+{
+	u32 value;
+
+	value = __raw_readl(clk->mapping->base);
+	value &= ~0x000B8000;
+
+	__raw_writel(value , clk->mapping->base);
+}
+
+static int dsiphy_enable(struct clk *clk)
+{
+	u32 value;
+	int multi;
+
+	value = __raw_readl(clk->mapping->base);
+	multi = (value & 0x3f) + 1;
+
+	if ((multi < 12) || (multi > 33))
+		return -EIO;
+
+	__raw_writel(value | 0x000B8000, clk->mapping->base);
+
+	return 0;
+}
+
+static int dsiphy_set_rate(struct clk *clk, unsigned long rate)
+{
+	u32 value;
+	int idx;
+
+	idx = rate / clk->parent->rate;
+	if ((idx < 12) || (idx > 33))
+		return -EINVAL;
+
+	idx += -1;
+
+	value = __raw_readl(clk->mapping->base);
+	value = (value & ~0x3f) + idx;
+
+	__raw_writel(value, clk->mapping->base);
+
+	return 0;
+}
+
+static struct clk_ops dsiphy_clk_ops = {
+	.recalc		= dsiphy_recalc,
+	.round_rate	= dsiphy_round_rate,
+	.set_rate	= dsiphy_set_rate,
+	.enable		= dsiphy_enable,
+	.disable	= dsiphy_disable,
+};
+
+static struct clk_mapping dsi0phy_clk_mapping = {
+	.phys	= DSI0PHYCR,
+	.len	= 4,
+};
+
+static struct clk_mapping dsi1phy_clk_mapping = {
+	.phys	= DSI1PHYCR,
+	.len	= 4,
+};
+
+static struct clk dsi0phy_clk = {
+	.ops		= &dsiphy_clk_ops,
+	.parent		= &div6_clks[DIV6_DSI0P], /* late install */
+	.mapping	= &dsi0phy_clk_mapping,
+};
+
+static struct clk dsi1phy_clk = {
+	.ops		= &dsiphy_clk_ops,
+	.parent		= &div6_clks[DIV6_DSI1P], /* late install */
+	.mapping	= &dsi1phy_clk_mapping,
+};
+
+static struct clk *late_main_clks[] = {
+	&dsi0phy_clk,
+	&dsi1phy_clk,
+};
+
 enum { MSTP001,
 	MSTP129, MSTP128, MSTP127, MSTP126, MSTP125, MSTP118, MSTP116, MSTP100,
 	MSTP219,
@@ -429,6 +537,8 @@ static struct clk_lookup lookups[] = {
 	CLKDEV_ICK_ID("dsit_clk", "sh-mipi-dsi.1", &div6_clks[DIV6_DSIT]),
 	CLKDEV_ICK_ID("dsip_clk", "sh-mipi-dsi.0", &div6_clks[DIV6_DSI0P]),
 	CLKDEV_ICK_ID("dsip_clk", "sh-mipi-dsi.1", &div6_clks[DIV6_DSI1P]),
+	CLKDEV_ICK_ID("dsiphy_clk", "sh-mipi-dsi.0", &dsi0phy_clk),
+	CLKDEV_ICK_ID("dsiphy_clk", "sh-mipi-dsi.1", &dsi1phy_clk),
 
 	/* MSTP32 clocks */
 	CLKDEV_DEV_ID("i2c-sh_mobile.2", &mstp_clks[MSTP001]), /* I2C2 */
@@ -504,6 +614,9 @@ void __init sh73a0_clock_init(void)
 	if (!ret)
 		ret = sh_clk_mstp32_register(mstp_clks, MSTP_NR);
 
+	for (k = 0; !ret && (k < ARRAY_SIZE(late_main_clks)); k++)
+		ret = clk_register(late_main_clks[k]);
+
 	clkdev_add_table(lookups, ARRAY_SIZE(lookups));
 
 	if (!ret)
-- 
cgit v1.2.3-70-g09d2


From 4856f1946d1f404f6ff96857d5a895187d9caa8b Mon Sep 17 00:00:00 2001
From: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Date: Mon, 23 Jan 2012 15:52:03 +0100
Subject: ARM: mach-shmobile: add GPIO-to-IRQ translation to sh7372

This table is required to support the gpio_to_irq() translation.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/arm/mach-shmobile/pfc-sh7372.c | 41 +++++++++++++++++++++++++++++++++++++
 1 file changed, 41 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-shmobile/pfc-sh7372.c b/arch/arm/mach-shmobile/pfc-sh7372.c
index 1bd6585a6ac..336093f9210 100644
--- a/arch/arm/mach-shmobile/pfc-sh7372.c
+++ b/arch/arm/mach-shmobile/pfc-sh7372.c
@@ -23,6 +23,7 @@
 #include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/gpio.h>
+#include <mach/irqs.h>
 #include <mach/sh7372.h>
 
 #define CPU_ALL_PORT(fn, pfx, sfx) \
@@ -1594,6 +1595,43 @@ static struct pinmux_data_reg pinmux_data_regs[] = {
 	{ },
 };
 
+#define EXT_IRQ16L(n) evt2irq(0x200 + ((n) << 5))
+#define EXT_IRQ16H(n) evt2irq(0x3200 + (((n) - 16) << 5))
+static struct pinmux_irq pinmux_irqs[] = {
+	PINMUX_IRQ(EXT_IRQ16L(0), PORT6_FN0, PORT162_FN0),
+	PINMUX_IRQ(EXT_IRQ16L(1), PORT12_FN0),
+	PINMUX_IRQ(EXT_IRQ16L(2), PORT4_FN0, PORT5_FN0),
+	PINMUX_IRQ(EXT_IRQ16L(3), PORT8_FN0, PORT16_FN0),
+	PINMUX_IRQ(EXT_IRQ16L(4), PORT17_FN0, PORT163_FN0),
+	PINMUX_IRQ(EXT_IRQ16L(5), PORT18_FN0),
+	PINMUX_IRQ(EXT_IRQ16L(6), PORT39_FN0, PORT164_FN0),
+	PINMUX_IRQ(EXT_IRQ16L(7), PORT40_FN0, PORT167_FN0),
+	PINMUX_IRQ(EXT_IRQ16L(8), PORT41_FN0, PORT168_FN0),
+	PINMUX_IRQ(EXT_IRQ16L(9), PORT42_FN0, PORT169_FN0),
+	PINMUX_IRQ(EXT_IRQ16L(10), PORT65_FN0),
+	PINMUX_IRQ(EXT_IRQ16L(11), PORT67_FN0),
+	PINMUX_IRQ(EXT_IRQ16L(12), PORT80_FN0, PORT137_FN0),
+	PINMUX_IRQ(EXT_IRQ16L(13), PORT81_FN0, PORT145_FN0),
+	PINMUX_IRQ(EXT_IRQ16L(14), PORT82_FN0, PORT146_FN0),
+	PINMUX_IRQ(EXT_IRQ16L(15), PORT83_FN0, PORT147_FN0),
+	PINMUX_IRQ(EXT_IRQ16H(16), PORT84_FN0, PORT170_FN0),
+	PINMUX_IRQ(EXT_IRQ16H(17), PORT85_FN0),
+	PINMUX_IRQ(EXT_IRQ16H(18), PORT86_FN0),
+	PINMUX_IRQ(EXT_IRQ16H(19), PORT87_FN0),
+	PINMUX_IRQ(EXT_IRQ16H(20), PORT92_FN0),
+	PINMUX_IRQ(EXT_IRQ16H(21), PORT93_FN0),
+	PINMUX_IRQ(EXT_IRQ16H(22), PORT94_FN0),
+	PINMUX_IRQ(EXT_IRQ16H(23), PORT95_FN0),
+	PINMUX_IRQ(EXT_IRQ16H(24), PORT112_FN0),
+	PINMUX_IRQ(EXT_IRQ16H(25), PORT119_FN0),
+	PINMUX_IRQ(EXT_IRQ16H(26), PORT121_FN0, PORT172_FN0),
+	PINMUX_IRQ(EXT_IRQ16H(27), PORT122_FN0, PORT180_FN0),
+	PINMUX_IRQ(EXT_IRQ16H(28), PORT123_FN0, PORT181_FN0),
+	PINMUX_IRQ(EXT_IRQ16H(29), PORT129_FN0, PORT182_FN0),
+	PINMUX_IRQ(EXT_IRQ16H(30), PORT130_FN0, PORT183_FN0),
+	PINMUX_IRQ(EXT_IRQ16H(31), PORT138_FN0, PORT184_FN0),
+};
+
 static struct pinmux_info sh7372_pinmux_info = {
 	.name = "sh7372_pfc",
 	.reserved_id = PINMUX_RESERVED,
@@ -1614,6 +1652,9 @@ static struct pinmux_info sh7372_pinmux_info = {
 
 	.gpio_data = pinmux_data,
 	.gpio_data_size = ARRAY_SIZE(pinmux_data),
+
+	.gpio_irq = pinmux_irqs,
+	.gpio_irq_size = ARRAY_SIZE(pinmux_irqs),
 };
 
 void sh7372_pinmux_init(void)
-- 
cgit v1.2.3-70-g09d2


From a1ad803322a904a250fa901020b4a4dfaf51a829 Mon Sep 17 00:00:00 2001
From: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Date: Wed, 25 Jan 2012 22:07:05 +0100
Subject: sh: se7724: fix compile breakage

Fix compilation breakage

arch/sh/boards/mach-se/7724/setup.c:182: error: 'V4L2_PIX_FMT_RGB565' undeclared here (not in a function)
make[3]: *** [arch/sh/boards/mach-se/7724/setup.o] Error 1

caused by commit "fbdev: sh_mobile_lcdc: Support FOURCC-based format API"
Also add other missing headers, even if compilation currently succeeds
because of their indirect inclusion via other headers.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/boards/mach-ap325rxa/setup.c | 1 +
 arch/sh/boards/mach-ecovec24/setup.c | 2 ++
 arch/sh/boards/mach-kfr2r09/setup.c  | 1 +
 arch/sh/boards/mach-migor/setup.c    | 2 ++
 arch/sh/boards/mach-se/7724/setup.c  | 1 +
 5 files changed, 7 insertions(+)

(limited to 'arch')

diff --git a/arch/sh/boards/mach-ap325rxa/setup.c b/arch/sh/boards/mach-ap325rxa/setup.c
index 6418e95c2b6..ebd0f818a25 100644
--- a/arch/sh/boards/mach-ap325rxa/setup.c
+++ b/arch/sh/boards/mach-ap325rxa/setup.c
@@ -22,6 +22,7 @@
 #include <linux/i2c.h>
 #include <linux/smsc911x.h>
 #include <linux/gpio.h>
+#include <linux/videodev2.h>
 #include <media/ov772x.h>
 #include <media/soc_camera.h>
 #include <media/soc_camera_platform.h>
diff --git a/arch/sh/boards/mach-ecovec24/setup.c b/arch/sh/boards/mach-ecovec24/setup.c
index 033ef2ba621..cde7c0085ce 100644
--- a/arch/sh/boards/mach-ecovec24/setup.c
+++ b/arch/sh/boards/mach-ecovec24/setup.c
@@ -29,9 +29,11 @@
 #include <linux/input.h>
 #include <linux/input/sh_keysc.h>
 #include <linux/sh_eth.h>
+#include <linux/videodev2.h>
 #include <video/sh_mobile_lcdc.h>
 #include <sound/sh_fsi.h>
 #include <media/sh_mobile_ceu.h>
+#include <media/soc_camera.h>
 #include <media/tw9910.h>
 #include <media/mt9t112.h>
 #include <asm/heartbeat.h>
diff --git a/arch/sh/boards/mach-kfr2r09/setup.c b/arch/sh/boards/mach-kfr2r09/setup.c
index 2a18b06abda..5b382e1afae 100644
--- a/arch/sh/boards/mach-kfr2r09/setup.c
+++ b/arch/sh/boards/mach-kfr2r09/setup.c
@@ -22,6 +22,7 @@
 #include <linux/input/sh_keysc.h>
 #include <linux/i2c.h>
 #include <linux/usb/r8a66597.h>
+#include <linux/videodev2.h>
 #include <media/rj54n1cb0c.h>
 #include <media/soc_camera.h>
 #include <media/sh_mobile_ceu.h>
diff --git a/arch/sh/boards/mach-migor/setup.c b/arch/sh/boards/mach-migor/setup.c
index 68c3d6f4289..d37ba272052 100644
--- a/arch/sh/boards/mach-migor/setup.c
+++ b/arch/sh/boards/mach-migor/setup.c
@@ -21,9 +21,11 @@
 #include <linux/delay.h>
 #include <linux/clk.h>
 #include <linux/gpio.h>
+#include <linux/videodev2.h>
 #include <video/sh_mobile_lcdc.h>
 #include <media/sh_mobile_ceu.h>
 #include <media/ov772x.h>
+#include <media/soc_camera.h>
 #include <media/tw9910.h>
 #include <asm/clock.h>
 #include <asm/machvec.h>
diff --git a/arch/sh/boards/mach-se/7724/setup.c b/arch/sh/boards/mach-se/7724/setup.c
index 036fe1adaef..2b07fc01695 100644
--- a/arch/sh/boards/mach-se/7724/setup.c
+++ b/arch/sh/boards/mach-se/7724/setup.c
@@ -24,6 +24,7 @@
 #include <linux/input/sh_keysc.h>
 #include <linux/usb/r8a66597.h>
 #include <linux/sh_eth.h>
+#include <linux/videodev2.h>
 #include <video/sh_mobile_lcdc.h>
 #include <media/sh_mobile_ceu.h>
 #include <sound/sh_fsi.h>
-- 
cgit v1.2.3-70-g09d2


From 11c582e32c664f67e2518b9f97e6c91918617274 Mon Sep 17 00:00:00 2001
From: "Shimoda, Yoshihiro" <yoshihiro.shimoda.uh@renesas.com>
Date: Thu, 26 Jan 2012 17:44:05 +0900
Subject: sh: modify resource for SPI0 in setup-sh7757

The new spi-sh driver decodes the IORESOURCE_MEM_TYPE_MASK. So, the
resource needs the IORESOURCE_MEM_32BIT.

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/kernel/cpu/sh4a/setup-sh7757.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7757.c b/arch/sh/kernel/cpu/sh4a/setup-sh7757.c
index a7b2da6b3a1..226d8097540 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7757.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7757.c
@@ -133,7 +133,7 @@ static struct resource spi0_resources[] = {
 	[0] = {
 		.start	= 0xfe002000,
 		.end	= 0xfe0020ff,
-		.flags	= IORESOURCE_MEM,
+		.flags	= IORESOURCE_MEM | IORESOURCE_MEM_32BIT,
 	},
 	[1] = {
 		.start	= 86,
-- 
cgit v1.2.3-70-g09d2


From a206c0087323337595de1284feb09a98c2a389d2 Mon Sep 17 00:00:00 2001
From: "Shimoda, Yoshihiro" <yoshihiro.shimoda.uh@renesas.com>
Date: Thu, 26 Jan 2012 17:44:07 +0900
Subject: sh: add platform_device for SPI1 in setup-sh7757

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/kernel/cpu/sh4a/setup-sh7757.c | 20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)

(limited to 'arch')

diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7757.c b/arch/sh/kernel/cpu/sh4a/setup-sh7757.c
index 226d8097540..2875e8be4f7 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7757.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7757.c
@@ -661,6 +661,25 @@ static struct platform_device spi0_device = {
 	.resource	= spi0_resources,
 };
 
+static struct resource spi1_resources[] = {
+	{
+		.start	= 0xffd8ee70,
+		.end	= 0xffd8eeff,
+		.flags	= IORESOURCE_MEM | IORESOURCE_MEM_8BIT,
+	},
+	{
+		.start	= 54,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device spi1_device = {
+	.name	= "sh_spi",
+	.id	= 1,
+	.num_resources	= ARRAY_SIZE(spi1_resources),
+	.resource	= spi1_resources,
+};
+
 static struct resource usb_ehci_resources[] = {
 	[0] = {
 		.start	= 0xfe4f1000,
@@ -720,6 +739,7 @@ static struct platform_device *sh7757_devices[] __initdata = {
 	&dma2_device,
 	&dma3_device,
 	&spi0_device,
+	&spi1_device,
 	&usb_ehci_device,
 	&usb_ohci_device,
 };
-- 
cgit v1.2.3-70-g09d2


From 810ae3d26507e61d1f7a69e9716443df1ce41449 Mon Sep 17 00:00:00 2001
From: Dave Martin <dave.martin@linaro.org>
Date: Mon, 30 Jan 2012 16:15:22 +0000
Subject: ARM: devicetree: Add .dtb files to arch/arm/boot/.gitignore

Compiled device tree blobs shouldn't be committed in the kernel
tree, so ideally git should ignore them.

This patch will enable ignoring of any .dtb files which appear in
arch/arm/boot/

Signed-off-by: Dave Martin <dave.martin@linaro.org>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
---
 arch/arm/boot/.gitignore | 1 +
 1 file changed, 1 insertion(+)

(limited to 'arch')

diff --git a/arch/arm/boot/.gitignore b/arch/arm/boot/.gitignore
index ce1c5ff746e..3c79f85975a 100644
--- a/arch/arm/boot/.gitignore
+++ b/arch/arm/boot/.gitignore
@@ -3,3 +3,4 @@ zImage
 xipImage
 bootpImage
 uImage
+*.dtb
-- 
cgit v1.2.3-70-g09d2


From 8b3262c00d6feccdccd6567d27687ae4b64c54bd Mon Sep 17 00:00:00 2001
From: Greg Ungerer <gerg@uclinux.org>
Date: Mon, 16 Jan 2012 16:46:04 +1000
Subject: m68knommu: fix syscall tracing stuck process

The return path from an exception was checking too many bits in the
thread_info->flags, and getting stuck calling do_signal(). There was
no work to do, we should only be checking the low 8 bits (as per comments
and definitions in arch/m68k/include/asm/thread_info.h).

This fixes the stuck process problem when using strace.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
---
 arch/m68k/platform/coldfire/entry.S | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/m68k/platform/coldfire/entry.S b/arch/m68k/platform/coldfire/entry.S
index 863889fc31c..281e38c2b6c 100644
--- a/arch/m68k/platform/coldfire/entry.S
+++ b/arch/m68k/platform/coldfire/entry.S
@@ -136,7 +136,7 @@ Luser_return:
 	movel	%sp,%d1			/* get thread_info pointer */
 	andl	#-THREAD_SIZE,%d1	/* at base of kernel stack */
 	movel	%d1,%a0
-	movel	%a0@(TINFO_FLAGS),%d1	/* get thread_info->flags */
+	moveb	%a0@(TINFO_FLAGS+3),%d1	/* thread_info->flags (low 8 bits) */
 	jne	Lwork_to_do		/* still work to do */
 
 Lreturn:
@@ -148,8 +148,6 @@ Lwork_to_do:
 	btst	#TIF_NEED_RESCHED,%d1
 	jne	reschedule
 
-	/* GERG: do we need something here for TRACEing?? */
-
 Lsignal_return:
 	subql	#4,%sp			/* dummy return address */
 	SAVE_SWITCH_STACK
-- 
cgit v1.2.3-70-g09d2


From 57e00098cc0e43d001c9c8a018a1f8396faa0d16 Mon Sep 17 00:00:00 2001
From: Alexander Stein <alexander.stein@systec-electronic.com>
Date: Tue, 10 Jan 2012 14:06:07 +0100
Subject: m68k: Add shared bit to Coldfire kernel page entries

We had problems accessing our NOR flash trough mtd. The system always got
stuck at attaching UBI using ubiattach if booted from NFS or after mounting
squashfs as rootfs directly from NOR flash.
After some testing of the new changes introduced from v3.2-rc1 to v3.2-rc7
we had to apply the following patch to get mtd working again.

[gerg: The problem was ultimately caused by allocated kernel pages not having
the shared (SG) bit set. Without the SG bit set the MMU will look for page
matches incorporating the ASID as well. Things like module regions allocated
using vmalloc would fault when other processes run. ]

Signed-off-by: Alexander Stein <alexander.stein@systec-electronic.com>
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
---
 arch/m68k/include/asm/mcf_pgtable.h | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/m68k/include/asm/mcf_pgtable.h b/arch/m68k/include/asm/mcf_pgtable.h
index 756bde4fb4f..3c793682e5d 100644
--- a/arch/m68k/include/asm/mcf_pgtable.h
+++ b/arch/m68k/include/asm/mcf_pgtable.h
@@ -78,7 +78,8 @@
 				 | CF_PAGE_READABLE \
 				 | CF_PAGE_WRITABLE \
 				 | CF_PAGE_EXEC \
-				 | CF_PAGE_SYSTEM)
+				 | CF_PAGE_SYSTEM \
+				 | CF_PAGE_SHARED)
 
 #define PAGE_COPY	__pgprot(CF_PAGE_VALID \
 				 | CF_PAGE_ACCESSED \
-- 
cgit v1.2.3-70-g09d2


From 3372f5a7d005dd42e754490fed6a0171c4a018c6 Mon Sep 17 00:00:00 2001
From: Alexander Stein <alexander.stein@systec-electronic.com>
Date: Mon, 23 Jan 2012 15:45:56 +0100
Subject: m68k: Do not set global share for non-kernel shared pages

If the SG bit is set in MMUTR the page is accessible for all
userspace processes (ignoring the ASID). So a process might randomly
access a page from a different process which had a shared page
(from shared memory) in its context.

Signed-off-by: Alexander Stein <alexander.stein@systec-electronic.com>
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
---
 arch/m68k/mm/mcfmmu.c | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

(limited to 'arch')

diff --git a/arch/m68k/mm/mcfmmu.c b/arch/m68k/mm/mcfmmu.c
index babd5a97cdc..875b800ef0d 100644
--- a/arch/m68k/mm/mcfmmu.c
+++ b/arch/m68k/mm/mcfmmu.c
@@ -87,7 +87,7 @@ void __init paging_init(void)
 
 int cf_tlb_miss(struct pt_regs *regs, int write, int dtlb, int extension_word)
 {
-	unsigned long flags, mmuar;
+	unsigned long flags, mmuar, mmutr;
 	struct mm_struct *mm;
 	pgd_t *pgd;
 	pmd_t *pmd;
@@ -137,9 +137,10 @@ int cf_tlb_miss(struct pt_regs *regs, int write, int dtlb, int extension_word)
 	if (!pte_dirty(*pte) && !KMAPAREA(mmuar))
 		set_pte(pte, pte_wrprotect(*pte));
 
-	mmu_write(MMUTR, (mmuar & PAGE_MASK) | (asid << MMUTR_IDN) |
-		(((int)(pte->pte) & (int)CF_PAGE_MMUTR_MASK)
-		>> CF_PAGE_MMUTR_SHIFT) | MMUTR_V);
+	mmutr = (mmuar & PAGE_MASK) | (asid << MMUTR_IDN) | MMUTR_V;
+	if ((mmuar < TASK_UNMAPPED_BASE) || (mmuar >= TASK_SIZE))
+		mmutr |= (pte->pte & CF_PAGE_MMUTR_MASK) >> CF_PAGE_MMUTR_SHIFT;
+	mmu_write(MMUTR, mmutr);
 
 	mmu_write(MMUDR, (pte_val(*pte) & PAGE_MASK) |
 		((pte->pte) & CF_PAGE_MMUDR_MASK) | MMUDR_SZ_8KB | MMUDR_X);
-- 
cgit v1.2.3-70-g09d2


From c1d2f1bccf4259384e581b937e694ee8a350fe55 Mon Sep 17 00:00:00 2001
From: Prarit Bhargava <prarit@redhat.com>
Date: Mon, 6 Feb 2012 13:28:55 -0500
Subject: x86/microcode: Remove noisy AMD microcode warning

AMD processors will never support /dev/cpu/microcode updating so
just silently fail instead of printing out a warning for every
cpu.

Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Cc: Borislav Petkov <borislav.petkov@amd.com>
Link: http://lkml.kernel.org/r/1328552935-965-1-git-send-email-prarit@redhat.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/microcode_amd.c | 1 -
 1 file changed, 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/microcode_amd.c b/arch/x86/kernel/microcode_amd.c
index ac0417be913..73465aab28f 100644
--- a/arch/x86/kernel/microcode_amd.c
+++ b/arch/x86/kernel/microcode_amd.c
@@ -360,7 +360,6 @@ out:
 static enum ucode_state
 request_microcode_user(int cpu, const void __user *buf, size_t size)
 {
-	pr_info("AMD microcode update via /dev/cpu/microcode not supported\n");
 	return UCODE_ERROR;
 }
 
-- 
cgit v1.2.3-70-g09d2


From 32c3233885eb10ac9cb9410f2f8cd64b8df2b2a1 Mon Sep 17 00:00:00 2001
From: Andreas Herrmann <andreas.herrmann3@amd.com>
Date: Wed, 8 Feb 2012 20:52:29 +0100
Subject: x86/amd: Fix L1i and L2 cache sharing information for AMD family 15h
 processors

For L1 instruction cache and L2 cache the shared CPU information
is wrong. On current AMD family 15h CPUs those caches are shared
between both cores of a compute unit.

This fixes https://bugzilla.kernel.org/show_bug.cgi?id=42607

Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com>
Cc: Petkov Borislav <Borislav.Petkov@amd.com>
Cc: Dave Jones <davej@redhat.com>
Cc: <stable@kernel.org>
Link: http://lkml.kernel.org/r/20120208195229.GA17523@alberich.amd.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/cpu/intel_cacheinfo.c | 44 ++++++++++++++++++++++++++++-------
 1 file changed, 36 insertions(+), 8 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/cpu/intel_cacheinfo.c b/arch/x86/kernel/cpu/intel_cacheinfo.c
index 6b45e5e7a90..73d08ed98a6 100644
--- a/arch/x86/kernel/cpu/intel_cacheinfo.c
+++ b/arch/x86/kernel/cpu/intel_cacheinfo.c
@@ -326,8 +326,7 @@ static void __cpuinit amd_calc_l3_indices(struct amd_northbridge *nb)
 	l3->indices = (max(max3(sc0, sc1, sc2), sc3) << 10) - 1;
 }
 
-static void __cpuinit amd_init_l3_cache(struct _cpuid4_info_regs *this_leaf,
-					int index)
+static void __cpuinit amd_init_l3_cache(struct _cpuid4_info_regs *this_leaf, int index)
 {
 	int node;
 
@@ -725,14 +724,16 @@ static DEFINE_PER_CPU(struct _cpuid4_info *, ici_cpuid4_info);
 #define CPUID4_INFO_IDX(x, y)	(&((per_cpu(ici_cpuid4_info, x))[y]))
 
 #ifdef CONFIG_SMP
-static void __cpuinit cache_shared_cpu_map_setup(unsigned int cpu, int index)
+
+static int __cpuinit cache_shared_amd_cpu_map_setup(unsigned int cpu, int index)
 {
-	struct _cpuid4_info	*this_leaf, *sibling_leaf;
-	unsigned long num_threads_sharing;
-	int index_msb, i, sibling;
+	struct _cpuid4_info *this_leaf;
+	int ret, i, sibling;
 	struct cpuinfo_x86 *c = &cpu_data(cpu);
 
-	if ((index == 3) && (c->x86_vendor == X86_VENDOR_AMD)) {
+	ret = 0;
+	if (index == 3) {
+		ret = 1;
 		for_each_cpu(i, cpu_llc_shared_mask(cpu)) {
 			if (!per_cpu(ici_cpuid4_info, i))
 				continue;
@@ -743,8 +744,35 @@ static void __cpuinit cache_shared_cpu_map_setup(unsigned int cpu, int index)
 				set_bit(sibling, this_leaf->shared_cpu_map);
 			}
 		}
-		return;
+	} else if ((c->x86 == 0x15) && ((index == 1) || (index == 2))) {
+		ret = 1;
+		for_each_cpu(i, cpu_sibling_mask(cpu)) {
+			if (!per_cpu(ici_cpuid4_info, i))
+				continue;
+			this_leaf = CPUID4_INFO_IDX(i, index);
+			for_each_cpu(sibling, cpu_sibling_mask(cpu)) {
+				if (!cpu_online(sibling))
+					continue;
+				set_bit(sibling, this_leaf->shared_cpu_map);
+			}
+		}
 	}
+
+	return ret;
+}
+
+static void __cpuinit cache_shared_cpu_map_setup(unsigned int cpu, int index)
+{
+	struct _cpuid4_info *this_leaf, *sibling_leaf;
+	unsigned long num_threads_sharing;
+	int index_msb, i;
+	struct cpuinfo_x86 *c = &cpu_data(cpu);
+
+	if (c->x86_vendor == X86_VENDOR_AMD) {
+		if (cache_shared_amd_cpu_map_setup(cpu, index))
+			return;
+	}
+
 	this_leaf = CPUID4_INFO_IDX(cpu, index);
 	num_threads_sharing = 1 + this_leaf->base.eax.split.num_threads_sharing;
 
-- 
cgit v1.2.3-70-g09d2


From 6369fd41fc6075a547394d95608ca7ff0e878698 Mon Sep 17 00:00:00 2001
From: NeilBrown <neilb@suse.de>
Date: Mon, 9 Jan 2012 13:14:12 +1100
Subject: ARM: OMAP: add RCU locking to omap2_set_init_voltage.

opp_find_freq_ceil and opp_get_voltage are documented as requiring
rcu_lock to be held.  So hold it.

Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Kevin Hilman <khilman@ti.com>
---
 arch/arm/mach-omap2/pm.c | 3 +++
 1 file changed, 3 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/pm.c b/arch/arm/mach-omap2/pm.c
index 1881fe91514..5a65dd04aa3 100644
--- a/arch/arm/mach-omap2/pm.c
+++ b/arch/arm/mach-omap2/pm.c
@@ -174,14 +174,17 @@ static int __init omap2_set_init_voltage(char *vdd_name, char *clk_name,
 	freq = clk->rate;
 	clk_put(clk);
 
+	rcu_read_lock();
 	opp = opp_find_freq_ceil(dev, &freq);
 	if (IS_ERR(opp)) {
+		rcu_read_unlock();
 		pr_err("%s: unable to find boot up OPP for vdd_%s\n",
 			__func__, vdd_name);
 		goto exit;
 	}
 
 	bootup_volt = opp_get_voltage(opp);
+	rcu_read_unlock();
 	if (!bootup_volt) {
 		pr_err("%s: unable to find voltage corresponding "
 			"to the bootup OPP for vdd_%s\n", __func__, vdd_name);
-- 
cgit v1.2.3-70-g09d2


From 03e4fd6eb25e6b46536ecdb0d1b7d33d46b15480 Mon Sep 17 00:00:00 2001
From: Santosh Shilimkar <santosh.shilimkar@ti.com>
Date: Sun, 5 Feb 2012 13:18:44 +0530
Subject: ARM: OMAP4: cpuidle: Fix the C-state reporting to cpuidle governor.

OMAP4 cpuidle driver is reporting the state requested by governor
rather than the actually attempted one.

This is obviously misleading sysfs and powertop cpuidle statistics.
Fix it so that stats are reported correctly.

Reported-by: Kevin Hilman <khilman@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
[khilman@ti.com: minor changelog edits]
Signed-off-by: Kevin Hilman <khilman@ti.com>
---
 arch/arm/mach-omap2/cpuidle44xx.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/cpuidle44xx.c b/arch/arm/mach-omap2/cpuidle44xx.c
index cfdbb86bc84..72e018b9b26 100644
--- a/arch/arm/mach-omap2/cpuidle44xx.c
+++ b/arch/arm/mach-omap2/cpuidle44xx.c
@@ -65,7 +65,6 @@ static int omap4_enter_idle(struct cpuidle_device *dev,
 	struct timespec ts_preidle, ts_postidle, ts_idle;
 	u32 cpu1_state;
 	int idle_time;
-	int new_state_idx;
 	int cpu_id = smp_processor_id();
 
 	/* Used to keep track of the total time in idle */
@@ -84,8 +83,8 @@ static int omap4_enter_idle(struct cpuidle_device *dev,
 	 */
 	cpu1_state = pwrdm_read_pwrst(cpu1_pd);
 	if (cpu1_state != PWRDM_POWER_OFF) {
-		new_state_idx = drv->safe_state_index;
-		cx = cpuidle_get_statedata(&dev->states_usage[new_state_idx]);
+		index = drv->safe_state_index;
+		cx = cpuidle_get_statedata(&dev->states_usage[index]);
 	}
 
 	if (index > 0)
-- 
cgit v1.2.3-70-g09d2


From 2ec1fc4e169acc0b8d6733ff028fd52e766773d9 Mon Sep 17 00:00:00 2001
From: Santosh Shilimkar <santosh.shilimkar@ti.com>
Date: Thu, 2 Feb 2012 19:33:55 +0530
Subject: ARM: OMAP4: Move the barrier memboclk_steal() as part of reserve
 callback

arm_memblock_steal() is not suppose to be used outside ->reserve callback.
OMAP barrier errata code was using it outside reserve callback and hence
it was broken.

Move the allocation as part of ->reserve callback to fix the it.

Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/Kconfig                   |  4 ++--
 arch/arm/mach-omap2/common.h                  |  1 +
 arch/arm/mach-omap2/io.c                      |  1 +
 arch/arm/mach-omap2/omap4-common.c            | 25 ++++++++++++++++---------
 arch/arm/plat-omap/common.c                   |  1 +
 arch/arm/plat-omap/include/plat/omap-secure.h |  6 ++++++
 6 files changed, 27 insertions(+), 11 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index 41e6612ecba..ac6b1d3554d 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -365,8 +365,8 @@ config OMAP3_SDRC_AC_TIMING
 	  going on could result in system crashes;
 
 config OMAP4_ERRATA_I688
-	bool "OMAP4 errata: Async Bridge Corruption (BROKEN)"
-	depends on ARCH_OMAP4 && BROKEN
+	bool "OMAP4 errata: Async Bridge Corruption"
+	depends on ARCH_OMAP4
 	select ARCH_HAS_BARRIERS
 	help
 	  If a data is stalled inside asynchronous bridge because of back
diff --git a/arch/arm/mach-omap2/common.h b/arch/arm/mach-omap2/common.h
index febffde2ff1..7e9338e8d68 100644
--- a/arch/arm/mach-omap2/common.h
+++ b/arch/arm/mach-omap2/common.h
@@ -132,6 +132,7 @@ void omap3_map_io(void);
 void am33xx_map_io(void);
 void omap4_map_io(void);
 void ti81xx_map_io(void);
+void omap_barriers_init(void);
 
 /**
  * omap_test_timeout - busy-loop, testing a condition
diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index 3f174d51f67..f64aa79a786 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -307,6 +307,7 @@ void __init omapam33xx_map_common_io(void)
 void __init omap44xx_map_common_io(void)
 {
 	iotable_init(omap44xx_io_desc, ARRAY_SIZE(omap44xx_io_desc));
+	omap_barriers_init();
 }
 #endif
 
diff --git a/arch/arm/mach-omap2/omap4-common.c b/arch/arm/mach-omap2/omap4-common.c
index 40a8fbc07e4..ebc59509131 100644
--- a/arch/arm/mach-omap2/omap4-common.c
+++ b/arch/arm/mach-omap2/omap4-common.c
@@ -24,6 +24,7 @@
 
 #include <plat/irqs.h>
 #include <plat/sram.h>
+#include <plat/omap-secure.h>
 
 #include <mach/hardware.h>
 #include <mach/omap-wakeupgen.h>
@@ -43,6 +44,9 @@ static void __iomem *sar_ram_base;
 
 void __iomem *dram_sync, *sram_sync;
 
+static phys_addr_t paddr;
+static u32 size;
+
 void omap_bus_sync(void)
 {
 	if (dram_sync && sram_sync) {
@@ -52,18 +56,20 @@ void omap_bus_sync(void)
 	}
 }
 
-static int __init omap_barriers_init(void)
+/* Steal one page physical memory for barrier implementation */
+int __init omap_barrier_reserve_memblock(void)
 {
-	struct map_desc dram_io_desc[1];
-	phys_addr_t paddr;
-	u32 size;
-
-	if (!cpu_is_omap44xx())
-		return -ENODEV;
 
 	size = ALIGN(PAGE_SIZE, SZ_1M);
 	paddr = arm_memblock_steal(size, SZ_1M);
 
+	return 0;
+}
+
+void __init omap_barriers_init(void)
+{
+	struct map_desc dram_io_desc[1];
+
 	dram_io_desc[0].virtual = OMAP4_DRAM_BARRIER_VA;
 	dram_io_desc[0].pfn = __phys_to_pfn(paddr);
 	dram_io_desc[0].length = size;
@@ -75,9 +81,10 @@ static int __init omap_barriers_init(void)
 	pr_info("OMAP4: Map 0x%08llx to 0x%08lx for dram barrier\n",
 		(long long) paddr, dram_io_desc[0].virtual);
 
-	return 0;
 }
-core_initcall(omap_barriers_init);
+#else
+void __init omap_barriers_init(void)
+{}
 #endif
 
 void __init gic_init_irq(void)
diff --git a/arch/arm/plat-omap/common.c b/arch/arm/plat-omap/common.c
index 06383b51e65..4de7d1e79e7 100644
--- a/arch/arm/plat-omap/common.c
+++ b/arch/arm/plat-omap/common.c
@@ -69,6 +69,7 @@ void __init omap_reserve(void)
 	omap_vram_reserve_sdram_memblock();
 	omap_dsp_reserve_sdram_memblock();
 	omap_secure_ram_reserve_memblock();
+	omap_barrier_reserve_memblock();
 }
 
 void __init omap_init_consistent_dma_size(void)
diff --git a/arch/arm/plat-omap/include/plat/omap-secure.h b/arch/arm/plat-omap/include/plat/omap-secure.h
index 3047ff923a6..8c7994ce986 100644
--- a/arch/arm/plat-omap/include/plat/omap-secure.h
+++ b/arch/arm/plat-omap/include/plat/omap-secure.h
@@ -10,4 +10,10 @@ static inline void omap_secure_ram_reserve_memblock(void)
 { }
 #endif
 
+#ifdef CONFIG_OMAP4_ERRATA_I688
+extern int omap_barrier_reserve_memblock(void);
+#else
+static inline void omap_barrier_reserve_memblock(void)
+{ }
+#endif
 #endif /* __OMAP_SECURE_H__ */
-- 
cgit v1.2.3-70-g09d2


From abe763f2bccbc592d33a3a9c334acaefea022c0a Mon Sep 17 00:00:00 2001
From: Felipe Balbi <balbi@ti.com>
Date: Tue, 14 Feb 2012 10:54:46 +0200
Subject: ARM: OMAP2+: usb-host: fix compile warning

when commit 3528c58 (OMAP: omap_device: when
building return platform_device instead of
omap_device) started returning a platform_device
instead of a omap_device pointer when building
a device, it failed to convert all users introducing
a compile warning when building
arch/arm/mach-omap2/usb-host.c.

This patch fixes that warning.

Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/usb-host.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/usb-host.c b/arch/arm/mach-omap2/usb-host.c
index 771dc781b74..f51348dafaf 100644
--- a/arch/arm/mach-omap2/usb-host.c
+++ b/arch/arm/mach-omap2/usb-host.c
@@ -486,7 +486,7 @@ static void setup_4430ohci_io_mux(const enum usbhs_omap_port_mode *port_mode)
 void __init usbhs_init(const struct usbhs_omap_board_data *pdata)
 {
 	struct omap_hwmod	*oh[2];
-	struct omap_device	*od;
+	struct platform_device	*pdev;
 	int			bus_id = -1;
 	int			i;
 
@@ -522,11 +522,11 @@ void __init usbhs_init(const struct usbhs_omap_board_data *pdata)
 		return;
 	}
 
-	od = omap_device_build_ss(OMAP_USBHS_DEVICE, bus_id, oh, 2,
+	pdev = omap_device_build_ss(OMAP_USBHS_DEVICE, bus_id, oh, 2,
 				(void *)&usbhs_data, sizeof(usbhs_data),
 				omap_uhhtll_latency,
 				ARRAY_SIZE(omap_uhhtll_latency), false);
-	if (IS_ERR(od)) {
+	if (IS_ERR(pdev)) {
 		pr_err("Could not build hwmod devices %s,%s\n",
 			USBHS_UHH_HWMODNAME, USBHS_TLL_HWMODNAME);
 		return;
-- 
cgit v1.2.3-70-g09d2


From 62e37ca78b1a4ca2eb77875bfd7ac63a7e068c67 Mon Sep 17 00:00:00 2001
From: Stephen Warren <swarren@nvidia.com>
Date: Mon, 9 Jan 2012 11:00:32 -0700
Subject: Kbuild: Use dtc's -d (dependency) option

This hooks dtc into Kbuild's dependency system.

Thus, for example, "make dtbs" will rebuild tegra-harmony.dtb if only
tegra20.dtsi has changed yet tegra-harmony.dts has not. The previous
lack of this feature recently caused me to have very confusing "git
bisect" results.

For ARM, it's obvious what to add to $(targets). I'm not familiar enough
with other architectures to know what to add there. Powerpc appears to
already add various .dtb files into $(targets), but the other archs may
need something added to $(targets) to work.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Acked-by: Mark Salter <msalter@redhat.com>
---
 arch/c6x/boot/Makefile | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/c6x/boot/Makefile b/arch/c6x/boot/Makefile
index ecca820e604..6891257d514 100644
--- a/arch/c6x/boot/Makefile
+++ b/arch/c6x/boot/Makefile
@@ -13,7 +13,7 @@ obj-y += linked_dtb.o
 endif
 
 $(obj)/%.dtb: $(src)/dts/%.dts FORCE
-	$(call cmd,dtc)
+	$(call if_changed_dep,dtc)
 
 quiet_cmd_cp = CP      $< $@$2
 	cmd_cp = cat $< >$@$2 || (rm -f $@ && echo false)
-- 
cgit v1.2.3-70-g09d2


From 08a183f02b5fef1cd78d27ffc8281fa96d79f814 Mon Sep 17 00:00:00 2001
From: Catalin Marinas <catalin.marinas@arm.com>
Date: Tue, 14 Feb 2012 16:33:27 +0100
Subject: ARM: 7323/1: Do not allow ARM_LPAE on pre-ARMv7 architectures

This patch expands the Kconfig dependencies for ARM_LPAE to not allow
enabling when architectures other than ARMv7 are built into the kernel.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Reported-by: Russell King <linux@arm.linux.org.uk>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mm/Kconfig | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
index 1a3ca248816..7edef912163 100644
--- a/arch/arm/mm/Kconfig
+++ b/arch/arm/mm/Kconfig
@@ -631,7 +631,8 @@ comment "Processor Features"
 
 config ARM_LPAE
 	bool "Support for the Large Physical Address Extension"
-	depends on MMU && CPU_V7
+	depends on MMU && CPU_32v7 && !CPU_32v6 && !CPU_32v5 && \
+		!CPU_32v4 && !CPU_32v3
 	help
 	  Say Y if you have an ARMv7 processor supporting the LPAE page
 	  table format and you would like to access memory beyond the
-- 
cgit v1.2.3-70-g09d2


From 8e43a905dd574f54c5715d978318290ceafbe275 Mon Sep 17 00:00:00 2001
From: Rabin Vincent <rabin@rab.in>
Date: Wed, 15 Feb 2012 16:01:42 +0100
Subject: ARM: 7325/1: fix v7 boot with lockdep enabled

Bootup with lockdep enabled has been broken on v7 since b46c0f74657d
("ARM: 7321/1: cache-v7: Disable preemption when reading CCSIDR").

This is because v7_setup (which is called very early during boot) calls
v7_flush_dcache_all, and the save_and_disable_irqs added by that patch
ends up attempting to call into lockdep C code (trace_hardirqs_off())
when we are in no position to execute it (no stack, MMU off).

Fix this by using a notrace variant of save_and_disable_irqs.  The code
already uses the notrace variant of restore_irqs.

Reviewed-by: Nicolas Pitre <nico@linaro.org>
Acked-by: Stephen Boyd <sboyd@codeaurora.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: stable@vger.kernel.org
Signed-off-by: Rabin Vincent <rabin@rab.in>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/include/asm/assembler.h | 5 +++++
 arch/arm/mm/cache-v7.S           | 2 +-
 2 files changed, 6 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/include/asm/assembler.h b/arch/arm/include/asm/assembler.h
index 62f8095d46d..23371b17b23 100644
--- a/arch/arm/include/asm/assembler.h
+++ b/arch/arm/include/asm/assembler.h
@@ -137,6 +137,11 @@
 	disable_irq
 	.endm
 
+	.macro	save_and_disable_irqs_notrace, oldcpsr
+	mrs	\oldcpsr, cpsr
+	disable_irq_notrace
+	.endm
+
 /*
  * Restore interrupt state previously stored in a register.  We don't
  * guarantee that this will preserve the flags.
diff --git a/arch/arm/mm/cache-v7.S b/arch/arm/mm/cache-v7.S
index 7a24d39661f..a655d3da386 100644
--- a/arch/arm/mm/cache-v7.S
+++ b/arch/arm/mm/cache-v7.S
@@ -55,7 +55,7 @@ loop1:
 	cmp	r1, #2				@ see what cache we have at this level
 	blt	skip				@ skip if no cache, or just i-cache
 #ifdef CONFIG_PREEMPT
-	save_and_disable_irqs r9		@ make cssr&csidr read atomic
+	save_and_disable_irqs_notrace r9	@ make cssr&csidr read atomic
 #endif
 	mcr	p15, 2, r10, c0, c0, 0		@ select current cache level in cssr
 	isb					@ isb to sych the new cssr&csidr
-- 
cgit v1.2.3-70-g09d2


From 4272f98a1ae81709fc5c804c33c044064e419cd9 Mon Sep 17 00:00:00 2001
From: Javi Merino <javi.merino@arm.com>
Date: Wed, 16 Nov 2011 12:36:39 +0100
Subject: ARM: 7164/3: PL330: Fix the size of the dst_cache_ctrl field

dst_cache_ctrl affects bits 3, 1 and 0 of AWCACHE but it is a 3-bit
field in the Channel Control Register (see Table 3-21 of the DMA-330
Technical Reference Manual) and should be programmed as such.

Reference: <1320244259-10496-3-git-send-email-javi.merino@arm.com>

Signed-off-by: Javi Merino <javi.merino@arm.com>
Acked-by: Jassi Brar <jassisinghbrar@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/include/asm/hardware/pl330.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/include/asm/hardware/pl330.h b/arch/arm/include/asm/hardware/pl330.h
index 575fa8186ca..c1821385abf 100644
--- a/arch/arm/include/asm/hardware/pl330.h
+++ b/arch/arm/include/asm/hardware/pl330.h
@@ -41,7 +41,7 @@ enum pl330_dstcachectrl {
 	DCCTRL1, /* Bufferable only */
 	DCCTRL2, /* Cacheable, but do not allocate */
 	DCCTRL3, /* Cacheable and bufferable, but do not allocate */
-	DINVALID1 = 8,
+	DINVALID1,              /* AWCACHE = 0x1000 */
 	DINVALID2,
 	DCCTRL6, /* Cacheable write-through, allocate on writes only */
 	DCCTRL7, /* Cacheable write-back, allocate on writes only */
-- 
cgit v1.2.3-70-g09d2


From 46e33c606af8e0caeeca374103189663d877c0d6 Mon Sep 17 00:00:00 2001
From: Javi Merino <javi.merino@arm.com>
Date: Wed, 15 Feb 2012 17:36:39 +0100
Subject: ARM: 7326/2: PL330: fix null pointer dereference in pl330_chan_ctrl()

This fixes the thrd->req_running field being accessed before thrd
is checked for null. The error was introduced in

   abb959f: ARM: 7237/1: PL330: Fix driver freeze

Reference: <1326458191-23492-1-git-send-email-mans.rullgard@linaro.org>

Cc: stable@kernel.org
Signed-off-by: Mans Rullgard <mans.rullgard@linaro.org>
Acked-by: Javi Merino <javi.merino@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/common/pl330.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/common/pl330.c b/arch/arm/common/pl330.c
index d8e44a43047..ff3ad224482 100644
--- a/arch/arm/common/pl330.c
+++ b/arch/arm/common/pl330.c
@@ -1502,12 +1502,13 @@ int pl330_chan_ctrl(void *ch_id, enum pl330_chan_op op)
 	struct pl330_thread *thrd = ch_id;
 	struct pl330_dmac *pl330;
 	unsigned long flags;
-	int ret = 0, active = thrd->req_running;
+	int ret = 0, active;
 
 	if (!thrd || thrd->free || thrd->dmac->state == DYING)
 		return -EINVAL;
 
 	pl330 = thrd->dmac;
+	active = thrd->req_running;
 
 	spin_lock_irqsave(&pl330->lock, flags);
 
-- 
cgit v1.2.3-70-g09d2


From fee6a3c33a8f137f39cd9997b0476411f73576c7 Mon Sep 17 00:00:00 2001
From: Olof Johansson <olof@lixom.net>
Date: Wed, 15 Feb 2012 21:17:12 +0100
Subject: ARM: 7327/1: need to include asm/system.h in asm/processor.h

For files that include asm/processor.h but not asm/system.h:

arch/arm/mach-msm/include/mach/uncompress.h: In function 'putc':
arch/arm/mach-msm/include/mach/uncompress.h:48:3: error: implicit declaration of function 'smp_mb' [-Werror=implicit-function-declaration]

In this case, smp_mb() is from the cpu_relax() call in the msm putc().

It likely went uncaught when the uncompress.h change went in since the
defconfig didn't enable that code path, but later changes (e76f4750f4:
ARM: debug: arrange Kconfig options more logically) resulted in the
option being on for msm_defconfig and thus exposed it.

Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/include/asm/processor.h | 1 +
 1 file changed, 1 insertion(+)

(limited to 'arch')

diff --git a/arch/arm/include/asm/processor.h b/arch/arm/include/asm/processor.h
index ce280b8d613..cb8d638924f 100644
--- a/arch/arm/include/asm/processor.h
+++ b/arch/arm/include/asm/processor.h
@@ -22,6 +22,7 @@
 #include <asm/hw_breakpoint.h>
 #include <asm/ptrace.h>
 #include <asm/types.h>
+#include <asm/system.h>
 
 #ifdef __KERNEL__
 #define STACK_TOP	((current->personality & ADDR_LIMIT_32BIT) ? \
-- 
cgit v1.2.3-70-g09d2


From bc329ad7b018c8f6725cb025bf4d192925db84e6 Mon Sep 17 00:00:00 2001
From: Haojian Zhuang <haojian.zhuang@marvell.com>
Date: Mon, 6 Feb 2012 15:33:22 +0800
Subject: ARM: pxa: fix wrong parsing gpio event on spitz

(~GPLR0 & GPIO_bit(SPITZ_GPIO_KEY_INT)) | (GPLR0 &
GPIO_bit(SPITZ_GPIO_SYNC));

After using gpio_get_value, the statement should be in below.
((!gpio_get_value(SPITZ_GPIO_KEY_INT)
	<< GPIO_bit(SPITZ_GPIO_KEY_INT))
	| gpio_get_value(SPITZ_GPIO_SYNC));

Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
---
 arch/arm/mach-pxa/spitz_pm.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-pxa/spitz_pm.c b/arch/arm/mach-pxa/spitz_pm.c
index 34cbdac5152..438f02fe122 100644
--- a/arch/arm/mach-pxa/spitz_pm.c
+++ b/arch/arm/mach-pxa/spitz_pm.c
@@ -172,10 +172,9 @@ static int spitz_should_wakeup(unsigned int resume_on_alarm)
 static unsigned long spitz_charger_wakeup(void)
 {
 	unsigned long ret;
-	ret = (!gpio_get_value(SPITZ_GPIO_KEY_INT)
+	ret = ((!gpio_get_value(SPITZ_GPIO_KEY_INT)
 		<< GPIO_bit(SPITZ_GPIO_KEY_INT))
-		| (!gpio_get_value(SPITZ_GPIO_SYNC)
-		<< GPIO_bit(SPITZ_GPIO_SYNC));
+		| gpio_get_value(SPITZ_GPIO_SYNC));
 	return ret;
 }
 
-- 
cgit v1.2.3-70-g09d2


From 438d7dc2bb531de59e335fea69d4a041f353f6f9 Mon Sep 17 00:00:00 2001
From: Haojian Zhuang <haojian.zhuang@marvell.com>
Date: Mon, 6 Feb 2012 15:59:11 +0800
Subject: ARM: pxa: fix mixed declarations and code in sharpsl_pm

arch/arm/mach-pxa/sharpsl_pm.c: In function
'sharpsl_pm_pxa_read_max1111':
arch/arm/mach-pxa/sharpsl_pm.c:180: warning: ISO C90 forbids mixed
declarations and code

Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
---
 arch/arm/mach-pxa/sharpsl_pm.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-pxa/sharpsl_pm.c b/arch/arm/mach-pxa/sharpsl_pm.c
index 8d5168d253a..30989baf7f2 100644
--- a/arch/arm/mach-pxa/sharpsl_pm.c
+++ b/arch/arm/mach-pxa/sharpsl_pm.c
@@ -168,6 +168,7 @@ struct battery_thresh sharpsl_battery_levels_noac[] = {
 #define MAXCTRL_SEL_SH   4
 #define MAXCTRL_STR      (1u << 7)
 
+extern int max1111_read_channel(int);
 /*
  * Read MAX1111 ADC
  */
@@ -177,8 +178,6 @@ int sharpsl_pm_pxa_read_max1111(int channel)
 	if (machine_is_tosa())
 	    return 0;
 
-	extern int max1111_read_channel(int);
-
 	/* max1111 accepts channels from 0-3, however,
 	 * it is encoded from 0-7 here in the code.
 	 */
-- 
cgit v1.2.3-70-g09d2


From be9bac9d33c0864ac7684c683df5da3b0c38e3b7 Mon Sep 17 00:00:00 2001
From: Danny Kukawka <danny.kukawka@bisect.de>
Date: Wed, 15 Feb 2012 20:19:25 +0100
Subject: ARM: pxa: fix including linux/gpio.h twice

arch/arm/mach-pxa/pxa27x.c included 'linux/gpio.h' twice, remove
the duplicate.

Signed-off-by: Danny Kukawka <danny.kukawka@bisect.de>
Signed-off-by: Haojian Zhuang <haojian.zhuang@gmail.com>
---
 arch/arm/mach-pxa/pxa27x.c | 1 -
 1 file changed, 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c
index aed6cbcf386..c1673b3441d 100644
--- a/arch/arm/mach-pxa/pxa27x.c
+++ b/arch/arm/mach-pxa/pxa27x.c
@@ -22,7 +22,6 @@
 #include <linux/io.h>
 #include <linux/irq.h>
 #include <linux/i2c/pxa-i2c.h>
-#include <linux/gpio.h>
 
 #include <asm/mach/map.h>
 #include <mach/hardware.h>
-- 
cgit v1.2.3-70-g09d2


From 2c5e1ec920a67d5dc51755b3de0e4ad9030162ff Mon Sep 17 00:00:00 2001
From: Danny Kukawka <danny.kukawka@bisect.de>
Date: Thu, 16 Feb 2012 15:45:20 +0100
Subject: arch/arm/mach-mmp/: some files include some headers twice

arch/arm/mach-mmp/: some files include some headers twice:
- arch/arm/mach-mmp/aspenite.c and
  arch/arm/mach-mmp/tavorevb.c: 'linux/gpio.h'
- arch/arm/mach-mmp/pxa168.c: 'linux/platform_device.h'

Remove the duplicates.

Signed-off-by: Danny Kukawka <danny.kukawka@bisect.de>
Signed-off-by: Haojian Zhuang <haojian.zhuang@gmail.com>
---
 arch/arm/mach-mmp/aspenite.c | 1 -
 arch/arm/mach-mmp/pxa168.c   | 1 -
 arch/arm/mach-mmp/tavorevb.c | 1 -
 3 files changed, 3 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-mmp/aspenite.c b/arch/arm/mach-mmp/aspenite.c
index 17cb7606012..3588a558415 100644
--- a/arch/arm/mach-mmp/aspenite.c
+++ b/arch/arm/mach-mmp/aspenite.c
@@ -17,7 +17,6 @@
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/nand.h>
 #include <linux/interrupt.h>
-#include <linux/gpio.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
diff --git a/arch/arm/mach-mmp/pxa168.c b/arch/arm/mach-mmp/pxa168.c
index 7bc17eaa12e..ada1213982b 100644
--- a/arch/arm/mach-mmp/pxa168.c
+++ b/arch/arm/mach-mmp/pxa168.c
@@ -24,7 +24,6 @@
 #include <mach/dma.h>
 #include <mach/devices.h>
 #include <mach/mfp.h>
-#include <linux/platform_device.h>
 #include <linux/dma-mapping.h>
 #include <mach/pxa168.h>
 
diff --git a/arch/arm/mach-mmp/tavorevb.c b/arch/arm/mach-mmp/tavorevb.c
index 8e3b5af04a5..bc97170125b 100644
--- a/arch/arm/mach-mmp/tavorevb.c
+++ b/arch/arm/mach-mmp/tavorevb.c
@@ -12,7 +12,6 @@
 #include <linux/kernel.h>
 #include <linux/platform_device.h>
 #include <linux/smc91x.h>
-#include <linux/gpio.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
-- 
cgit v1.2.3-70-g09d2


From 88879c43eb8485861c17fcc15219c0b1ea17a925 Mon Sep 17 00:00:00 2001
From: Danny Kukawka <danny.kukawka@bisect.de>
Date: Thu, 16 Feb 2012 15:45:42 +0100
Subject: arch/arm/mach-pxa/: included linux/gpio.h twice

arch/arm/mach-pxa/pxa25x.c and arch/arm/mach-pxa/saarb.c
included 'linux/gpio.h' twice, remove the duplicates.

Signed-off-by: Danny Kukawka <danny.kukawka@bisect.de>
Signed-off-by: Haojian Zhuang <haojian.zhuang@gmail.com>
---
 arch/arm/mach-pxa/pxa25x.c | 1 -
 arch/arm/mach-pxa/saarb.c  | 1 -
 2 files changed, 2 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-pxa/pxa25x.c b/arch/arm/mach-pxa/pxa25x.c
index 91e4f6c0376..00d6eacab8e 100644
--- a/arch/arm/mach-pxa/pxa25x.c
+++ b/arch/arm/mach-pxa/pxa25x.c
@@ -25,7 +25,6 @@
 #include <linux/suspend.h>
 #include <linux/syscore_ops.h>
 #include <linux/irq.h>
-#include <linux/gpio.h>
 
 #include <asm/mach/map.h>
 #include <asm/suspend.h>
diff --git a/arch/arm/mach-pxa/saarb.c b/arch/arm/mach-pxa/saarb.c
index febc809ed5a..5aded5e6148 100644
--- a/arch/arm/mach-pxa/saarb.c
+++ b/arch/arm/mach-pxa/saarb.c
@@ -15,7 +15,6 @@
 #include <linux/i2c.h>
 #include <linux/i2c/pxa-i2c.h>
 #include <linux/mfd/88pm860x.h>
-#include <linux/gpio.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
-- 
cgit v1.2.3-70-g09d2


From d87f614326a2cb4c3ead0a45e5468c7c3ca6b72f Mon Sep 17 00:00:00 2001
From: Axel Lin <axel.lin@gmail.com>
Date: Fri, 30 Dec 2011 12:06:11 +0800
Subject: pxa/hx4700: add platform device and I2C info for AK4641 codec

The audio on hx4700 needs this to properly work.

Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Signed-off-by: Dmitry Artamonow <mad_soft@inbox.ru>
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked-by: Marek Vasut <marek.vasut@gmail.com>
Tested-by: Paul Parsons <lost.distance@yahoo.com>
Signed-off-by: Haojian Zhuang <haojian.zhuang@gmail.com>
---
 arch/arm/mach-pxa/hx4700.c | 25 +++++++++++++++++++++++++
 1 file changed, 25 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-pxa/hx4700.c b/arch/arm/mach-pxa/hx4700.c
index fb9b62dcf4c..208eef1c048 100644
--- a/arch/arm/mach-pxa/hx4700.c
+++ b/arch/arm/mach-pxa/hx4700.c
@@ -45,6 +45,7 @@
 #include <mach/hx4700.h>
 #include <mach/irda.h>
 
+#include <sound/ak4641.h>
 #include <video/platform_lcd.h>
 #include <video/w100fb.h>
 
@@ -764,6 +765,28 @@ static struct i2c_board_info __initdata pi2c_board_info[] = {
 	},
 };
 
+/*
+ * Asahi Kasei AK4641 on I2C
+ */
+
+static struct ak4641_platform_data ak4641_info = {
+	.gpio_power = GPIO27_HX4700_CODEC_ON,
+	.gpio_npdn  = GPIO109_HX4700_CODEC_nPDN,
+};
+
+static struct i2c_board_info i2c_board_info[] __initdata = {
+	{
+		I2C_BOARD_INFO("ak4641", 0x12),
+		.platform_data = &ak4641_info,
+	},
+};
+
+static struct platform_device audio = {
+	.name	= "hx4700-audio",
+	.id	= -1,
+};
+
+
 /*
  * PCMCIA
  */
@@ -790,6 +813,7 @@ static struct platform_device *devices[] __initdata = {
 	&gpio_vbus,
 	&power_supply,
 	&strataflash,
+	&audio,
 	&pcmcia,
 };
 
@@ -827,6 +851,7 @@ static void __init hx4700_init(void)
 	pxa_set_ficp_info(&ficp_info);
 	pxa27x_set_i2c_power_info(NULL);
 	pxa_set_i2c_info(NULL);
+	i2c_register_board_info(0, ARRAY_AND_SIZE(i2c_board_info));
 	i2c_register_board_info(1, ARRAY_AND_SIZE(pi2c_board_info));
 	pxa2xx_set_spi_info(2, &pxa_ssp2_master_info);
 	spi_register_board_info(ARRAY_AND_SIZE(tsc2046_board_info));
-- 
cgit v1.2.3-70-g09d2


From abdf8b5e07884a183938969253770164d60b87cb Mon Sep 17 00:00:00 2001
From: Jonas Bonn <jonas@southpole.se>
Date: Wed, 15 Feb 2012 15:00:32 +0100
Subject: openrisc: include export.h for EXPORT_SYMBOL

Use of EXPORT_SYMBOL requires inclusion of export.h

Signed-off-by: Jonas Bonn <jonas@southpole.se>
---
 arch/openrisc/kernel/init_task.c | 1 +
 arch/openrisc/kernel/irq.c       | 1 +
 2 files changed, 2 insertions(+)

(limited to 'arch')

diff --git a/arch/openrisc/kernel/init_task.c b/arch/openrisc/kernel/init_task.c
index 45744a38492..ca534082d5f 100644
--- a/arch/openrisc/kernel/init_task.c
+++ b/arch/openrisc/kernel/init_task.c
@@ -17,6 +17,7 @@
 
 #include <linux/init_task.h>
 #include <linux/mqueue.h>
+#include <linux/export.h>
 
 static struct signal_struct init_signals = INIT_SIGNALS(init_signals);
 static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand);
diff --git a/arch/openrisc/kernel/irq.c b/arch/openrisc/kernel/irq.c
index 59b30233833..4bfead22095 100644
--- a/arch/openrisc/kernel/irq.c
+++ b/arch/openrisc/kernel/irq.c
@@ -23,6 +23,7 @@
 #include <linux/irq.h>
 #include <linux/seq_file.h>
 #include <linux/kernel_stat.h>
+#include <linux/export.h>
 
 #include <linux/irqflags.h>
 
-- 
cgit v1.2.3-70-g09d2


From 3f6ffc8c2087791920721f086f9a92fde7bed9e2 Mon Sep 17 00:00:00 2001
From: Jonas Bonn <jonas@southpole.se>
Date: Wed, 15 Feb 2012 15:02:20 +0100
Subject: openrisc: Fix up audit_syscall_[entry|exit]() usage

Commits d7e7528bcd456f5c36ad4a202ccfb43c5aa98bc4 and
b05d8447e7821695bc2fa3359431f7a664232743 simplified the usage of the
audit_syscall_[entry|exit] functions.  Unfortunately, the OpenRISC
architecture didn't get fixed up along with the other architectures when
those patches were pushed.  This makes the relevant changes to this
architecture.

Signed-off-by: Jonas Bonn <jonas@southpole.se>
---
 arch/openrisc/include/asm/ptrace.h |  8 +++++++-
 arch/openrisc/kernel/ptrace.c      | 12 ++++--------
 2 files changed, 11 insertions(+), 9 deletions(-)

(limited to 'arch')

diff --git a/arch/openrisc/include/asm/ptrace.h b/arch/openrisc/include/asm/ptrace.h
index 054537c5f9c..e612ce4512c 100644
--- a/arch/openrisc/include/asm/ptrace.h
+++ b/arch/openrisc/include/asm/ptrace.h
@@ -77,7 +77,6 @@ struct pt_regs {
 	long  syscallno;	/* Syscall number (used by strace) */
 	long dummy;		/* Cheap alignment fix */
 };
-#endif /* __ASSEMBLY__ */
 
 /* TODO: Rename this to REDZONE because that's what it is */
 #define STACK_FRAME_OVERHEAD  128  /* size of minimum stack frame */
@@ -87,6 +86,13 @@ struct pt_regs {
 #define user_stack_pointer(regs)	((unsigned long)(regs)->sp)
 #define profile_pc(regs)		instruction_pointer(regs)
 
+static inline long regs_return_value(struct pt_regs *regs)
+{
+	return regs->gpr[11];
+}
+
+#endif /* __ASSEMBLY__ */
+
 /*
  * Offsets used by 'ptrace' system call interface.
  */
diff --git a/arch/openrisc/kernel/ptrace.c b/arch/openrisc/kernel/ptrace.c
index 656b94beab8..7259047d5f9 100644
--- a/arch/openrisc/kernel/ptrace.c
+++ b/arch/openrisc/kernel/ptrace.c
@@ -188,11 +188,9 @@ asmlinkage long do_syscall_trace_enter(struct pt_regs *regs)
 		 */
 		ret = -1L;
 
-	/* Are these regs right??? */
-	if (unlikely(current->audit_context))
-		audit_syscall_entry(audit_arch(), regs->syscallno,
-				    regs->gpr[3], regs->gpr[4],
-				    regs->gpr[5], regs->gpr[6]);
+	audit_syscall_entry(audit_arch(), regs->syscallno,
+			    regs->gpr[3], regs->gpr[4],
+			    regs->gpr[5], regs->gpr[6]);
 
 	return ret ? : regs->syscallno;
 }
@@ -201,9 +199,7 @@ asmlinkage void do_syscall_trace_leave(struct pt_regs *regs)
 {
 	int step;
 
-	if (unlikely(current->audit_context))
-		audit_syscall_exit(AUDITSC_RESULT(regs->gpr[11]),
-				   regs->gpr[11]);
+	audit_syscall_exit(regs);
 
 	step = test_thread_flag(TIF_SINGLESTEP);
 	if (step || test_thread_flag(TIF_SYSCALL_TRACE))
-- 
cgit v1.2.3-70-g09d2


From f3612304ee04a1a36ded7604771ea56d818158cb Mon Sep 17 00:00:00 2001
From: Heiko Carstens <heiko.carstens@de.ibm.com>
Date: Fri, 17 Feb 2012 10:29:20 +0100
Subject: [S390] idle: avoid RCU usage in extended quiescent state

Avoid calling wake_up() from our NMI "bottom halve" from RCU extended
quiescent state in idle. wake_up() has RCU read-side critical sections
but this will be completely ignored by RCU if the cpu is in extended
quiescent state.
Which means that whatever object is being accessed from within the
read-side critical section can be freed concurrently from a different
cpu.
So make sure we leave extended quiescent state before calling wake_up().

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
---
 arch/s390/kernel/process.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/s390/kernel/process.c b/arch/s390/kernel/process.c
index 3201ae44799..4261aa79977 100644
--- a/arch/s390/kernel/process.c
+++ b/arch/s390/kernel/process.c
@@ -76,7 +76,6 @@ static void default_idle(void)
 	if (test_thread_flag(TIF_MCCK_PENDING)) {
 		local_mcck_enable();
 		local_irq_enable();
-		s390_handle_mcck();
 		return;
 	}
 	trace_hardirqs_on();
@@ -93,10 +92,12 @@ void cpu_idle(void)
 	for (;;) {
 		tick_nohz_idle_enter();
 		rcu_idle_enter();
-		while (!need_resched())
+		while (!need_resched() && !test_thread_flag(TIF_MCCK_PENDING))
 			default_idle();
 		rcu_idle_exit();
 		tick_nohz_idle_exit();
+		if (test_thread_flag(TIF_MCCK_PENDING))
+			s390_handle_mcck();
 		preempt_enable_no_resched();
 		schedule();
 		preempt_disable();
-- 
cgit v1.2.3-70-g09d2


From 2320c5793790fcda80e6dcc088dbda86040235e5 Mon Sep 17 00:00:00 2001
From: Martin Schwidefsky <schwidefsky@de.ibm.com>
Date: Fri, 17 Feb 2012 10:29:21 +0100
Subject: [S390] incorrect PageTables counter for kvm page tables

The page_table_free_pgste function is used for kvm processes to free page
tables that have the pgste extension. It calls pgtable_page_ctor instead of
pgtable_page_dtor which increases NR_PAGETABLE instead of decreasing it.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
---
 arch/s390/mm/pgtable.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/s390/mm/pgtable.c b/arch/s390/mm/pgtable.c
index 9a4d02f64f1..51b0738e13d 100644
--- a/arch/s390/mm/pgtable.c
+++ b/arch/s390/mm/pgtable.c
@@ -574,7 +574,7 @@ static inline void page_table_free_pgste(unsigned long *table)
 	page = pfn_to_page(__pa(table) >> PAGE_SHIFT);
 	mp = (struct gmap_pgtable *) page->index;
 	BUG_ON(!list_empty(&mp->mapper));
-	pgtable_page_ctor(page);
+	pgtable_page_dtor(page);
 	atomic_set(&page->_mapcount, -1);
 	kfree(mp);
 	__free_page(page);
-- 
cgit v1.2.3-70-g09d2


From cf1eb40f8f5ea12c9e569e7282161fc7f194fd62 Mon Sep 17 00:00:00 2001
From: Martin Schwidefsky <schwidefsky@de.ibm.com>
Date: Fri, 17 Feb 2012 10:29:23 +0100
Subject: [S390] correct ktime to tod clock comparator conversion

The conversion of the ktime to a value suitable for the clock comparator
does not take changes to wall_to_monotonic into account. In fact the
conversion just needs the boot clock (sched_clock_base_cc) and the
total_sleep_time.

This is applicable to 3.2+ kernels.

CC: stable@vger.kernel.org
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
---
 arch/s390/kernel/time.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/s390/kernel/time.c b/arch/s390/kernel/time.c
index fa02f443f5f..14da278febb 100644
--- a/arch/s390/kernel/time.c
+++ b/arch/s390/kernel/time.c
@@ -113,11 +113,14 @@ static void fixup_clock_comparator(unsigned long long delta)
 static int s390_next_ktime(ktime_t expires,
 			   struct clock_event_device *evt)
 {
+	struct timespec ts;
 	u64 nsecs;
 
-	nsecs = ktime_to_ns(ktime_sub(expires, ktime_get_monotonic_offset()));
+	ts.tv_sec = ts.tv_nsec = 0;
+	monotonic_to_bootbased(&ts);
+	nsecs = ktime_to_ns(ktime_add(timespec_to_ktime(ts), expires));
 	do_div(nsecs, 125);
-	S390_lowcore.clock_comparator = TOD_UNIX_EPOCH + (nsecs << 9);
+	S390_lowcore.clock_comparator = sched_clock_base_cc + (nsecs << 9);
 	set_clock_comparator(S390_lowcore.clock_comparator);
 	return 0;
 }
-- 
cgit v1.2.3-70-g09d2


From 45d5a1683c04be28abdf5c04c27b1417e0374486 Mon Sep 17 00:00:00 2001
From: Steven Rostedt <rostedt@goodmis.org>
Date: Sun, 19 Feb 2012 16:43:37 -0500
Subject: x86/nmi: Test saved %cs in NMI to determine nested NMI case

Currently, the NMI handler tests if it is nested by checking the
special variable saved on the stack (set during NMI handling)
and whether the saved stack is the NMI stack as well (to prevent
the race when the variable is set to zero).

But userspace may set their %rsp to any value as long as they do
not derefence it, and it may make it point to the NMI stack,
which will prevent NMIs from triggering while the userspace app
is running. (I tested this, and it is indeed the case)

Add another check to determine nested NMIs by looking at the
saved %cs (code segment register) and making sure that it is the
kernel code segment.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: <stable@kernel.org>
Link: http://lkml.kernel.org/r/1329687817.1561.27.camel@acer.local.home
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/entry_64.S | 7 +++++++
 1 file changed, 7 insertions(+)

(limited to 'arch')

diff --git a/arch/x86/kernel/entry_64.S b/arch/x86/kernel/entry_64.S
index 3fe8239fd8f..debd851de6f 100644
--- a/arch/x86/kernel/entry_64.S
+++ b/arch/x86/kernel/entry_64.S
@@ -1531,6 +1531,13 @@ ENTRY(nmi)
 	/* Use %rdx as out temp variable throughout */
 	pushq_cfi %rdx
 
+	/*
+	 * If %cs was not the kernel segment, then the NMI triggered in user
+	 * space, which means it is definitely not nested.
+	 */
+	cmp $__KERNEL_CS, 16(%rsp)
+	jne first_nmi
+
 	/*
 	 * Check the special variable on the stack to see if NMIs are
 	 * executing.
-- 
cgit v1.2.3-70-g09d2


From 416d7214741daba3acd6d328289858390bef37bc Mon Sep 17 00:00:00 2001
From: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Date: Fri, 10 Feb 2012 09:24:08 -0500
Subject: xen/setup: Remove redundant filtering of PTE masks.

commit 7347b4082e55ac4a673f06a0a0ce25c37273c9ec "xen: Allow
unprivileged Xen domains to create iomap pages" added a redundant
line in the early bootup code to filter out the PTE. That
filtering is already done a bit earlier so this extra processing
is not required.

Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
---
 arch/x86/xen/enlighten.c | 4 ----
 1 file changed, 4 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c
index 12eb07bfb26..7c44e1bf981 100644
--- a/arch/x86/xen/enlighten.c
+++ b/arch/x86/xen/enlighten.c
@@ -1204,10 +1204,6 @@ asmlinkage void __init xen_start_kernel(void)
 
 	pgd = (pgd_t *)xen_start_info->pt_base;
 
-	if (!xen_initial_domain())
-		__supported_pte_mask &= ~(_PAGE_PWT | _PAGE_PCD);
-
-	__supported_pte_mask |= _PAGE_IOMAP;
 	/* Don't do the full vcpu_info placement stuff until we have a
 	   possible map and a non-dummy shared_info. */
 	per_cpu(xen_vcpu, 0) = &HYPERVISOR_shared_info->vcpu_info[0];
-- 
cgit v1.2.3-70-g09d2


From 8eaffa67b43e99ae581622c5133e20b0f48bcef1 Mon Sep 17 00:00:00 2001
From: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Date: Fri, 10 Feb 2012 09:16:27 -0500
Subject: xen/pat: Disable PAT support for now.

[Pls also look at https://lkml.org/lkml/2012/2/10/228]

Using of PAT to change pages from WB to WC works quite nicely.
Changing it back to WB - not so much. The crux of the matter is
that the code that does this (__page_change_att_set_clr) has only
limited information so when it tries to the change it gets
the "raw" unfiltered information instead of the properly filtered one -
and the "raw" one tell it that PSE bit is on (while infact it
is not).  As a result when the PTE is set to be WB from WC, we get
tons of:

:WARNING: at arch/x86/xen/mmu.c:475 xen_make_pte+0x67/0xa0()
:Hardware name: HP xw4400 Workstation
.. snip..
:Pid: 27, comm: kswapd0 Tainted: G        W    3.2.2-1.fc16.x86_64 #1
:Call Trace:
: [<ffffffff8106dd1f>] warn_slowpath_common+0x7f/0xc0
: [<ffffffff8106dd7a>] warn_slowpath_null+0x1a/0x20
: [<ffffffff81005a17>] xen_make_pte+0x67/0xa0
: [<ffffffff810051bd>] __raw_callee_save_xen_make_pte+0x11/0x1e
: [<ffffffff81040e15>] ? __change_page_attr_set_clr+0x9d5/0xc00
: [<ffffffff8114c2e8>] ? __purge_vmap_area_lazy+0x158/0x1d0
: [<ffffffff8114cca5>] ? vm_unmap_aliases+0x175/0x190
: [<ffffffff81041168>] change_page_attr_set_clr+0x128/0x4c0
: [<ffffffff81041542>] set_pages_array_wb+0x42/0xa0
: [<ffffffff8100a9b2>] ? check_events+0x12/0x20
: [<ffffffffa0074d4c>] ttm_pages_put+0x1c/0x70 [ttm]
: [<ffffffffa0074e98>] ttm_page_pool_free+0xf8/0x180 [ttm]
: [<ffffffffa0074f78>] ttm_pool_mm_shrink+0x58/0x90 [ttm]
: [<ffffffff8112ba04>] shrink_slab+0x154/0x310
: [<ffffffff8112f17a>] balance_pgdat+0x4fa/0x6c0
: [<ffffffff8112f4b8>] kswapd+0x178/0x3d0
: [<ffffffff815df134>] ? __schedule+0x3d4/0x8c0
: [<ffffffff81090410>] ? remove_wait_queue+0x50/0x50
: [<ffffffff8112f340>] ? balance_pgdat+0x6c0/0x6c0
: [<ffffffff8108fb6c>] kthread+0x8c/0xa0

for every page. The proper fix for this is has been posted
and is https://lkml.org/lkml/2012/2/10/228
"x86/cpa: Use pte_attrs instead of pte_flags on CPA/set_p.._wb/wc operations."
along with a detailed description of the problem and solution.

But since that posting has gone nowhere I am proposing
this band-aid solution so that at least users don't get
the page corruption (the pages that are WC don't get changed to WB
and end up being recycled for filesystem or other things causing
mysterious crashes).

The negative impact of this patch is that users of WC flag
(which are InfiniBand, radeon, nouveau drivers) won't be able
to set that flag - so they are going to see performance degradation.
But stability is more important here.

Fixes RH BZ# 742032, 787403, and 745574
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
---
 arch/x86/xen/enlighten.c | 2 ++
 arch/x86/xen/mmu.c       | 8 ++++----
 2 files changed, 6 insertions(+), 4 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c
index 7c44e1bf981..4172af8ceeb 100644
--- a/arch/x86/xen/enlighten.c
+++ b/arch/x86/xen/enlighten.c
@@ -1141,7 +1141,9 @@ asmlinkage void __init xen_start_kernel(void)
 
 	/* Prevent unwanted bits from being set in PTEs. */
 	__supported_pte_mask &= ~_PAGE_GLOBAL;
+#if 0
 	if (!xen_initial_domain())
+#endif
 		__supported_pte_mask &= ~(_PAGE_PWT | _PAGE_PCD);
 
 	__supported_pte_mask |= _PAGE_IOMAP;
diff --git a/arch/x86/xen/mmu.c b/arch/x86/xen/mmu.c
index 58a0e46c404..95c1cf60c66 100644
--- a/arch/x86/xen/mmu.c
+++ b/arch/x86/xen/mmu.c
@@ -415,13 +415,13 @@ static pteval_t iomap_pte(pteval_t val)
 static pteval_t xen_pte_val(pte_t pte)
 {
 	pteval_t pteval = pte.pte;
-
+#if 0
 	/* If this is a WC pte, convert back from Xen WC to Linux WC */
 	if ((pteval & (_PAGE_PAT | _PAGE_PCD | _PAGE_PWT)) == _PAGE_PAT) {
 		WARN_ON(!pat_enabled);
 		pteval = (pteval & ~_PAGE_PAT) | _PAGE_PWT;
 	}
-
+#endif
 	if (xen_initial_domain() && (pteval & _PAGE_IOMAP))
 		return pteval;
 
@@ -463,7 +463,7 @@ void xen_set_pat(u64 pat)
 static pte_t xen_make_pte(pteval_t pte)
 {
 	phys_addr_t addr = (pte & PTE_PFN_MASK);
-
+#if 0
 	/* If Linux is trying to set a WC pte, then map to the Xen WC.
 	 * If _PAGE_PAT is set, then it probably means it is really
 	 * _PAGE_PSE, so avoid fiddling with the PAT mapping and hope
@@ -476,7 +476,7 @@ static pte_t xen_make_pte(pteval_t pte)
 		if ((pte & (_PAGE_PCD | _PAGE_PWT)) == _PAGE_PWT)
 			pte = (pte & ~(_PAGE_PCD | _PAGE_PWT)) | _PAGE_PAT;
 	}
-
+#endif
 	/*
 	 * Unprivileged domains are allowed to do IOMAPpings for
 	 * PCI passthrough, but not map ISA space.  The ISA
-- 
cgit v1.2.3-70-g09d2


From dfe981ffb987f8702c91d652921f3d1cf9e9b85e Mon Sep 17 00:00:00 2001
From: Jesper Juhl <jj@chaosbits.net>
Date: Sun, 15 Jan 2012 21:07:35 +0100
Subject: MIPS: BMIPS: smp-bmips.c does not need to include version.h

As 'make versioncheck' nicely points out, arch/mips/kernel/smp-bmips.c
has no need to '#include <linux/version.h>'. This patch removes the
unneeded include.

Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Cc: Kevin Cernekee <cernekee@gmail.com>
Cc: trivial@kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/3269/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/kernel/smp-bmips.c | 1 -
 1 file changed, 1 deletion(-)

(limited to 'arch')

diff --git a/arch/mips/kernel/smp-bmips.c b/arch/mips/kernel/smp-bmips.c
index 58fe71afd87..d5e950ab852 100644
--- a/arch/mips/kernel/smp-bmips.c
+++ b/arch/mips/kernel/smp-bmips.c
@@ -8,7 +8,6 @@
  * SMP support for BMIPS
  */
 
-#include <linux/version.h>
 #include <linux/init.h>
 #include <linux/sched.h>
 #include <linux/mm.h>
-- 
cgit v1.2.3-70-g09d2


From 35d1a455b987e6a3768370f05eeced8908e77bcc Mon Sep 17 00:00:00 2001
From: Ralf Baechle <ralf@linux-mips.org>
Date: Mon, 16 Jan 2012 12:38:05 +0100
Subject: MIPS: Remove temporary kludge from <asm/page.h>

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/include/asm/page.h | 3 ---
 1 file changed, 3 deletions(-)

(limited to 'arch')

diff --git a/arch/mips/include/asm/page.h b/arch/mips/include/asm/page.h
index d41790928c6..da9bd7d270d 100644
--- a/arch/mips/include/asm/page.h
+++ b/arch/mips/include/asm/page.h
@@ -39,9 +39,6 @@
 #define HPAGE_MASK	(~(HPAGE_SIZE - 1))
 #define HUGETLB_PAGE_ORDER	(HPAGE_SHIFT - PAGE_SHIFT)
 #else /* !CONFIG_HUGETLB_PAGE */
-# ifndef BUILD_BUG
-#  define BUILD_BUG() do { extern void __build_bug(void); __build_bug(); } while (0)
-# endif
 #define HPAGE_SHIFT	({BUILD_BUG(); 0; })
 #define HPAGE_SIZE	({BUILD_BUG(); 0; })
 #define HPAGE_MASK	({BUILD_BUG(); 0; })
-- 
cgit v1.2.3-70-g09d2


From 3624919c24227e56c9d9717a5c86e077a2570cf3 Mon Sep 17 00:00:00 2001
From: Manuel Lauss <manuel.lauss@googlemail.com>
Date: Sat, 14 Jan 2012 10:44:15 +0100
Subject: MIPS: Alchemy: Update Au1300 inlined GPIO macros

Add a few missing macros for the inlined (!CONFIG_GPIOLIB) GPIO case.
Fixes a build failure in the mmc core due to missing gpio_request_one()
function:
mmc/core/cd-gpio.c: In function 'mmc_cd_gpio_request':
mmc/core/cd-gpio.c:43:2: error: implicit declaration of function 'gpio_request_one' [-Werror=implicit-function-declaration]

Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/3268/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/include/asm/mach-au1x00/gpio-au1300.h | 20 +++++++++++++++++++-
 1 file changed, 19 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/mips/include/asm/mach-au1x00/gpio-au1300.h b/arch/mips/include/asm/mach-au1x00/gpio-au1300.h
index 556e1be20bf..fb9975c74c5 100644
--- a/arch/mips/include/asm/mach-au1x00/gpio-au1300.h
+++ b/arch/mips/include/asm/mach-au1x00/gpio-au1300.h
@@ -11,6 +11,9 @@
 #include <asm/io.h>
 #include <asm/mach-au1x00/au1000.h>
 
+struct gpio;
+struct gpio_chip;
+
 /* with the current GPIC design, up to 128 GPIOs are possible.
  * The only implementation so far is in the Au1300, which has 75 externally
  * available GPIOs.
@@ -203,7 +206,22 @@ static inline int gpio_request(unsigned int gpio, const char *label)
 	return 0;
 }
 
-static inline void gpio_free(unsigned int gpio)
+static inline int gpio_request_one(unsigned gpio,
+					unsigned long flags, const char *label)
+{
+	return 0;
+}
+
+static inline int gpio_request_array(struct gpio *array, size_t num)
+{
+	return 0;
+}
+
+static inline void gpio_free(unsigned gpio)
+{
+}
+
+static inline void gpio_free_array(struct gpio *array, size_t num)
 {
 }
 
-- 
cgit v1.2.3-70-g09d2


From 193fb42613ec8d96bcb645cf717e949821ff07a7 Mon Sep 17 00:00:00 2001
From: Yoichi Yuasa <yuasa@linux-mips.org>
Date: Tue, 10 Jan 2012 21:11:56 +0900
Subject: MIPS: txx9 7segled fix struct device has no member

arch/mips/txx9/generic/7segled.c: In function 'tx_7segled_init_sysfs':
arch/mips/txx9/generic/7segled.c:105:6: error: 'struct device' has no member named 'dev'
make[3]: *** [arch/mips/txx9/generic/7segled.o] Error 1

Signed-off-by: Yoichi Yuasa <yuasa@linux-mips.org>
Cc: Greg Kroah-Hartman <gregkh@suse.de>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Cc: linux-mips@linux-mips.org>
Patchwork: https://patchwork.linux-mips.org/patch/3250/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/txx9/generic/7segled.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/mips/txx9/generic/7segled.c b/arch/mips/txx9/generic/7segled.c
index 8e93b212252..4642f56e70e 100644
--- a/arch/mips/txx9/generic/7segled.c
+++ b/arch/mips/txx9/generic/7segled.c
@@ -102,7 +102,7 @@ static int __init tx_7segled_init_sysfs(void)
 			break;
 		}
 		dev->id = i;
-		dev->dev = &tx_7segled_subsys;
+		dev->bus = &tx_7segled_subsys;
 		error = device_register(dev);
 		if (!error) {
 			device_create_file(dev, &dev_attr_ascii);
-- 
cgit v1.2.3-70-g09d2


From 8e3657903589f5a5a36a95f660a33e137b3da6f5 Mon Sep 17 00:00:00 2001
From: Manuel Lauss <manuel.lauss@googlemail.com>
Date: Tue, 20 Dec 2011 17:37:29 +0100
Subject: MIPS: Alchemy: Increase minimum timeout for 32kHz timer.

Since a clocksource change post 3.2-rc1, tasks on my DB1500 board
hang after random amounts of time (from a few minutes to a few hours),
regardless of load.  Debugging showed that the compare-match register
value is a few seconds lower than the current counter value.

The minimum value of 8 was initialy determined by a trial-and-error
approach.  Currently it is sufficient for all Alchemys (without PCI
apparently), independent of CPU clock;  only the DB1500 and DB1550
boards experience these timer-related tasks hangs now.

This patch increases the minimum timeout by 1 (to 9 counter ticks)
which seems sufficient since the systems are still working perfectly
fine after over 24 hours.

Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/3214/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/alchemy/common/time.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/mips/alchemy/common/time.c b/arch/mips/alchemy/common/time.c
index 7da4d008148..a7193ae13a5 100644
--- a/arch/mips/alchemy/common/time.c
+++ b/arch/mips/alchemy/common/time.c
@@ -146,7 +146,7 @@ static int __init alchemy_time_init(unsigned int m2int)
 	cd->shift = 32;
 	cd->mult = div_sc(32768, NSEC_PER_SEC, cd->shift);
 	cd->max_delta_ns = clockevent_delta2ns(0xffffffff, cd);
-	cd->min_delta_ns = clockevent_delta2ns(8, cd);	/* ~0.25ms */
+	cd->min_delta_ns = clockevent_delta2ns(9, cd);	/* ~0.28ms */
 	clockevents_register_device(cd);
 	setup_irq(m2int, &au1x_rtcmatch2_irqaction);
 
-- 
cgit v1.2.3-70-g09d2


From 58a7fca67a9a6c7dccff727f16826f811ca59127 Mon Sep 17 00:00:00 2001
From: Tony Wu <tung7970@gmail.com>
Date: Thu, 22 Dec 2011 22:53:17 +0800
Subject: MIPS: vmlinux.lds.S: remove duplicate _sdata symbol

_sdata is defined twice in vmlinux.lds.S. According to vmlinux.ld.h
in asm-generic, _sdata should be marked at the beginning RO_DATA_SECTION.

 *      _sdata = .;
 *      RO_DATA_SECTION(PAGE_SIZE)
 *      RW_DATA_SECTION(...)
 *      _edata = .;

Remove the one that is marked at RW_DATA_SECTION.

Signed-off-by: Tony Wu <tung7970@gmail.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/3215/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/kernel/vmlinux.lds.S | 1 -
 1 file changed, 1 deletion(-)

(limited to 'arch')

diff --git a/arch/mips/kernel/vmlinux.lds.S b/arch/mips/kernel/vmlinux.lds.S
index a81176f44c7..924da5eb703 100644
--- a/arch/mips/kernel/vmlinux.lds.S
+++ b/arch/mips/kernel/vmlinux.lds.S
@@ -69,7 +69,6 @@ SECTIONS
 	RODATA
 
 	/* writeable */
-	_sdata = .;				/* Start of data section */
 	.data : {	/* Data */
 		. = . + DATAOFFSET;		/* for CONFIG_MAPPED_KERNEL */
 
-- 
cgit v1.2.3-70-g09d2


From 43ca4957a15a120d0822a60a22998dbb41bbf075 Mon Sep 17 00:00:00 2001
From: Kautuk Consul <consul.kautuk@gmail.com>
Date: Fri, 23 Dec 2011 16:52:42 +0530
Subject: MIPS: fault.c: Port OOM changes to do_page_fault

Commit d065bd810b6deb67d4897a14bfe21f8eb526ba99
(mm: retry page fault when blocking on disk transfer) and
commit 37b23e0525d393d48a7d59f870b3bc061a30ccdb
(x86,mm: make pagefault killable)

The above commits introduced changes into the x86 pagefault handler
for making the page fault handler retryable as well as killable.

These changes reduce the mmap_sem hold time, which is crucial
during OOM killer invocation.

Port these changes to MIPS.

Without these changes, my MIPS board encounters many hang and livelock
scenarios.
After applying this patch, OOM feature performance improves according to
my testing.

Signed-off-by: Mohd. Faris <mohdfarisq2010@gmail.com>
Signed-off-by: Kautuk Consul <consul.kautuk@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/3217/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/mm/fault.c | 36 +++++++++++++++++++++++++++++-------
 1 file changed, 29 insertions(+), 7 deletions(-)

(limited to 'arch')

diff --git a/arch/mips/mm/fault.c b/arch/mips/mm/fault.c
index 937cf336816..69ebd586d7f 100644
--- a/arch/mips/mm/fault.c
+++ b/arch/mips/mm/fault.c
@@ -42,6 +42,8 @@ asmlinkage void __kprobes do_page_fault(struct pt_regs *regs, unsigned long writ
 	const int field = sizeof(unsigned long) * 2;
 	siginfo_t info;
 	int fault;
+	unsigned int flags = FAULT_FLAG_ALLOW_RETRY | FAULT_FLAG_KILLABLE |
+						 (write ? FAULT_FLAG_WRITE : 0);
 
 #if 0
 	printk("Cpu%d[%s:%d:%0*lx:%ld:%0*lx]\n", raw_smp_processor_id(),
@@ -91,6 +93,7 @@ asmlinkage void __kprobes do_page_fault(struct pt_regs *regs, unsigned long writ
 	if (in_atomic() || !mm)
 		goto bad_area_nosemaphore;
 
+retry:
 	down_read(&mm->mmap_sem);
 	vma = find_vma(mm, address);
 	if (!vma)
@@ -144,7 +147,11 @@ good_area:
 	 * make sure we exit gracefully rather than endlessly redo
 	 * the fault.
 	 */
-	fault = handle_mm_fault(mm, vma, address, write ? FAULT_FLAG_WRITE : 0);
+	fault = handle_mm_fault(mm, vma, address, flags);
+
+	if ((fault & VM_FAULT_RETRY) && fatal_signal_pending(current))
+		return;
+
 	perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS, 1, regs, address);
 	if (unlikely(fault & VM_FAULT_ERROR)) {
 		if (fault & VM_FAULT_OOM)
@@ -153,12 +160,27 @@ good_area:
 			goto do_sigbus;
 		BUG();
 	}
-	if (fault & VM_FAULT_MAJOR) {
-		perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS_MAJ, 1, regs, address);
-		tsk->maj_flt++;
-	} else {
-		perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS_MIN, 1, regs, address);
-		tsk->min_flt++;
+	if (flags & FAULT_FLAG_ALLOW_RETRY) {
+		if (fault & VM_FAULT_MAJOR) {
+			perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS_MAJ, 1,
+						  regs, address);
+			tsk->maj_flt++;
+		} else {
+			perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS_MIN, 1,
+						  regs, address);
+			tsk->min_flt++;
+		}
+		if (fault & VM_FAULT_RETRY) {
+			flags &= ~FAULT_FLAG_ALLOW_RETRY;
+
+			/*
+			 * No need to up_read(&mm->mmap_sem) as we would
+			 * have already released it in __lock_page_or_retry
+			 * in mm/filemap.c.
+			 */
+
+			goto retry;
+		}
 	}
 
 	up_read(&mm->mmap_sem);
-- 
cgit v1.2.3-70-g09d2


From f79eaeb108499e10fa604103737e7273404e76a4 Mon Sep 17 00:00:00 2001
From: Bjorn Helgaas <bhelgaas@google.com>
Date: Fri, 16 Dec 2011 15:31:39 -0700
Subject: MIPS: PCI: use list_for_each_entry() for bus->devices traversal

Replace open-coded list traversal with list_for_each_entry().

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: linux-pci@vger.kernel.org
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/3200/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/pci/pci.c                    |  5 +----
 arch/mips/pmc-sierra/yosemite/ht-irq.c | 10 ----------
 2 files changed, 1 insertion(+), 14 deletions(-)

(limited to 'arch')

diff --git a/arch/mips/pci/pci.c b/arch/mips/pci/pci.c
index aec2b111d35..15521505ebe 100644
--- a/arch/mips/pci/pci.c
+++ b/arch/mips/pci/pci.c
@@ -279,7 +279,6 @@ void __devinit pcibios_fixup_bus(struct pci_bus *bus)
 {
 	/* Propagate hose info into the subordinate devices.  */
 
-	struct list_head *ln;
 	struct pci_dev *dev = bus->self;
 
 	if (pci_probe_only && dev &&
@@ -288,9 +287,7 @@ void __devinit pcibios_fixup_bus(struct pci_bus *bus)
 		pcibios_fixup_device_resources(dev, bus);
 	}
 
-	for (ln = bus->devices.next; ln != &bus->devices; ln = ln->next) {
-		dev = pci_dev_b(ln);
-
+	list_for_each_entry(dev, &bus->devices, bus_list) {
 		if ((dev->class >> 8) != PCI_CLASS_BRIDGE_PCI)
 			pcibios_fixup_device_resources(dev, bus);
 	}
diff --git a/arch/mips/pmc-sierra/yosemite/ht-irq.c b/arch/mips/pmc-sierra/yosemite/ht-irq.c
index 86b98e98fb4..62ead6601c6 100644
--- a/arch/mips/pmc-sierra/yosemite/ht-irq.c
+++ b/arch/mips/pmc-sierra/yosemite/ht-irq.c
@@ -35,16 +35,6 @@
  */
 void __init titan_ht_pcibios_fixup_bus(struct pci_bus *bus)
 {
-	struct pci_bus *current_bus = bus;
-	struct pci_dev *devices;
-	struct list_head *devices_link;
-
-	list_for_each(devices_link, &(current_bus->devices)) {
-		devices = pci_dev_b(devices_link);
-		if (devices == NULL)
-			continue;
-	}
-
 	/*
 	 * PLX and SPKT related changes go here
 	 */
-- 
cgit v1.2.3-70-g09d2


From 87b43457f896975ba2aca1a611c018b3429a7b19 Mon Sep 17 00:00:00 2001
From: Gabor Juhos <juhosg@openwrt.org>
Date: Sun, 11 Dec 2011 16:11:41 +0100
Subject: MIPS: ATH79: Avoid a kernel bug on AR913X

Wireless mac registration causes a BUG on AR913X SoCs due to
a missing 'else'.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/3182/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/ath79/dev-wmac.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/mips/ath79/dev-wmac.c b/arch/mips/ath79/dev-wmac.c
index 24f546985b6..e2150705206 100644
--- a/arch/mips/ath79/dev-wmac.c
+++ b/arch/mips/ath79/dev-wmac.c
@@ -96,7 +96,7 @@ void __init ath79_register_wmac(u8 *cal_data)
 {
 	if (soc_is_ar913x())
 		ar913x_wmac_setup();
-	if (soc_is_ar933x())
+	else if (soc_is_ar933x())
 		ar933x_wmac_setup();
 	else
 		BUG();
-- 
cgit v1.2.3-70-g09d2


From 410e512925e4a0eef6ff26c7375f7b888e52d404 Mon Sep 17 00:00:00 2001
From: Paul Gortmaker <paul.gortmaker@windriver.com>
Date: Sun, 22 Jan 2012 15:02:46 -0500
Subject: MIPS: Netlogic: Fix defconfigs for coverage builds

The toolchain prefix will most likely be site specific and is not
guaranteed to always be "mips-linux-gnu-", so simply don't specify one.
A quick "git grep" shows this to be consistent amongst other cross
compiled targets.

Similarly, the site specific initramfs source location should not be used,
since that won't exist for most people, and it prevents them from doing
coverage builds on the defconfigs, such as those done in linux-next and run
routinely by many others.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: Jayachandran C <jayachandranc@netlogicmicro.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/3296/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/configs/nlm_xlp_defconfig | 4 ++--
 arch/mips/configs/nlm_xlr_defconfig | 4 ++--
 2 files changed, 4 insertions(+), 4 deletions(-)

(limited to 'arch')

diff --git a/arch/mips/configs/nlm_xlp_defconfig b/arch/mips/configs/nlm_xlp_defconfig
index 4479fd669ac..28c6b276c21 100644
--- a/arch/mips/configs/nlm_xlp_defconfig
+++ b/arch/mips/configs/nlm_xlp_defconfig
@@ -8,7 +8,7 @@ CONFIG_HIGH_RES_TIMERS=y
 # CONFIG_SECCOMP is not set
 CONFIG_USE_OF=y
 CONFIG_EXPERIMENTAL=y
-CONFIG_CROSS_COMPILE="mips-linux-gnu-"
+CONFIG_CROSS_COMPILE=""
 # CONFIG_LOCALVERSION_AUTO is not set
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
@@ -22,7 +22,7 @@ CONFIG_AUDIT=y
 CONFIG_CGROUPS=y
 CONFIG_NAMESPACES=y
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE="usr/dev_file_list usr/rootfs.xlp"
+CONFIG_INITRAMFS_SOURCE=""
 CONFIG_RD_BZIP2=y
 CONFIG_RD_LZMA=y
 CONFIG_INITRAMFS_COMPRESSION_LZMA=y
diff --git a/arch/mips/configs/nlm_xlr_defconfig b/arch/mips/configs/nlm_xlr_defconfig
index 7c68666fdd6..d0b857d98c9 100644
--- a/arch/mips/configs/nlm_xlr_defconfig
+++ b/arch/mips/configs/nlm_xlr_defconfig
@@ -8,7 +8,7 @@ CONFIG_HIGH_RES_TIMERS=y
 CONFIG_PREEMPT_VOLUNTARY=y
 CONFIG_KEXEC=y
 CONFIG_EXPERIMENTAL=y
-CONFIG_CROSS_COMPILE="mips-linux-gnu-"
+CONFIG_CROSS_COMPILE=""
 # CONFIG_LOCALVERSION_AUTO is not set
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
@@ -22,7 +22,7 @@ CONFIG_AUDIT=y
 CONFIG_NAMESPACES=y
 CONFIG_SCHED_AUTOGROUP=y
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE="usr/dev_file_list usr/rootfs.xlr"
+CONFIG_INITRAMFS_SOURCE=""
 CONFIG_RD_BZIP2=y
 CONFIG_RD_LZMA=y
 CONFIG_INITRAMFS_COMPRESSION_GZIP=y
-- 
cgit v1.2.3-70-g09d2


From d7eb0922b95080c37cae6b94937c0750b227e320 Mon Sep 17 00:00:00 2001
From: Ralf Baechle <ralf@linux-mips.org>
Date: Mon, 23 Jan 2012 14:58:56 +0100
Subject: MIPS: PowerTV: Fix defconfigs for coverage builds

The toolchain prefix is most likely be site specific and is not
guaranteed to always be "mips-linux-gnu-", so simply don't specify one.
A quick "git grep" shows this to be consistent amongst other cross
compiled targets.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/configs/powertv_defconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/mips/configs/powertv_defconfig b/arch/mips/configs/powertv_defconfig
index 3b0b6e8c853..7fda0ce5f69 100644
--- a/arch/mips/configs/powertv_defconfig
+++ b/arch/mips/configs/powertv_defconfig
@@ -6,7 +6,7 @@ CONFIG_HZ_1000=y
 CONFIG_PREEMPT=y
 # CONFIG_SECCOMP is not set
 CONFIG_EXPERIMENTAL=y
-CONFIG_CROSS_COMPILE="mips-linux-"
+CONFIG_CROSS_COMPILE=""
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
 CONFIG_LOG_BUF_SHIFT=16
-- 
cgit v1.2.3-70-g09d2


From f232c7e8294372f8c2bee719b1593f3fa7fa9cfa Mon Sep 17 00:00:00 2001
From: Masanari Iida <standby24x7@gmail.com>
Date: Wed, 8 Feb 2012 21:53:14 +0900
Subject: MIPS: traps.c: Fix typo

Correct spelling of "Schedulier" to "Scheduler" in arch/mips/kernel/traps.c

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Cc: linux-mips@linux-mips.org
Cc: trivial@kernel.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/3354/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/kernel/traps.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c
index cc4a3f120f5..d79ae5437b5 100644
--- a/arch/mips/kernel/traps.c
+++ b/arch/mips/kernel/traps.c
@@ -1135,7 +1135,7 @@ asmlinkage void do_mt(struct pt_regs *regs)
 		printk(KERN_DEBUG "YIELD Scheduler Exception\n");
 		break;
 	case 5:
-		printk(KERN_DEBUG "Gating Storage Schedulier Exception\n");
+		printk(KERN_DEBUG "Gating Storage Scheduler Exception\n");
 		break;
 	default:
 		printk(KERN_DEBUG "*** UNKNOWN THREAD EXCEPTION %d ***\n",
-- 
cgit v1.2.3-70-g09d2


From 97899e555b76ce64222303bc8d46fda9d49eb14b Mon Sep 17 00:00:00 2001
From: Tony Lindgren <tony@atomide.com>
Date: Mon, 20 Feb 2012 09:43:28 -0800
Subject: ARM: OMAP: Fix kernel panic with HSMMC when twl4030_gpio is a module

On some omaps twl4030_gpio has a callback to try to initialize
the MMC controller. If twl4030_gpio is compiled as a module,
bad things can happen because the callback function starts
calling functions that are supposed to be marked __init:

Kernel panic - not syncing: Attempted to kill the idle task!
twl4030_gpio twl4030_gpio: can't dispatch IRQs from modules
gpiochip_add: registered GPIOs 192 to 209 on device: twl4030
Unable to handle kernel paging request at virtual address b82a4c74
...

Additionally if this does not fail, warnings are produced
about trying to register the MMC multiple times.

Fix this by removing __init from omap_mux_get_by_name,
and add checks if omap2_hsmmc_init() is getting called more
than once.

Note that this will get fixed properly later on by splitting
omap2_hsmmc_init into two functions.

Reported-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/hsmmc.c | 6 ++++++
 arch/arm/mach-omap2/mux.c   | 2 +-
 2 files changed, 7 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/hsmmc.c b/arch/arm/mach-omap2/hsmmc.c
index b40c2889529..19dd1657245 100644
--- a/arch/arm/mach-omap2/hsmmc.c
+++ b/arch/arm/mach-omap2/hsmmc.c
@@ -428,6 +428,7 @@ static int omap_hsmmc_pdata_init(struct omap2_hsmmc_info *c,
 	return 0;
 }
 
+static int omap_hsmmc_done;
 #define MAX_OMAP_MMC_HWMOD_NAME_LEN		16
 
 void omap_init_hsmmc(struct omap2_hsmmc_info *hsmmcinfo, int ctrl_nr)
@@ -491,6 +492,11 @@ void omap2_hsmmc_init(struct omap2_hsmmc_info *controllers)
 {
 	u32 reg;
 
+	if (omap_hsmmc_done)
+		return;
+
+	omap_hsmmc_done = 1;
+
 	if (!cpu_is_omap44xx()) {
 		if (cpu_is_omap2430()) {
 			control_pbias_offset = OMAP243X_CONTROL_PBIAS_LITE;
diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c
index fb8bc9fa43b..611a0e3d54c 100644
--- a/arch/arm/mach-omap2/mux.c
+++ b/arch/arm/mach-omap2/mux.c
@@ -218,7 +218,7 @@ static int _omap_mux_get_by_name(struct omap_mux_partition *partition,
 	return -ENODEV;
 }
 
-static int __init
+static int
 omap_mux_get_by_name(const char *muxname,
 			struct omap_mux_partition **found_partition,
 			struct omap_mux **found_mux)
-- 
cgit v1.2.3-70-g09d2


From d517110243130965e2803cc2373d434bdaf6dafb Mon Sep 17 00:00:00 2001
From: Tony Lindgren <tony@atomide.com>
Date: Mon, 20 Feb 2012 10:00:03 -0800
Subject: ARM: OMAP: Fix build error when mmc_omap is built as module

Otherwise we get the following error:

arch/arm/mach-omap2/built-in.o: In function `n8x0_mmc_callback':
twl-common.c:(.text+0x108a0): undefined reference to
`omap_mmc_notify_cover_event'

Fix this by warning about unusable MMC cover events.

The long term fix needs to change the MMC drivers to
register board specific callbacks directly with PMIC.

Reported-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/board-n8x0.c | 4 ++++
 1 file changed, 4 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/board-n8x0.c b/arch/arm/mach-omap2/board-n8x0.c
index 42a4d11fad2..67226271760 100644
--- a/arch/arm/mach-omap2/board-n8x0.c
+++ b/arch/arm/mach-omap2/board-n8x0.c
@@ -371,7 +371,11 @@ static void n8x0_mmc_callback(void *data, u8 card_mask)
 	else
 		*openp = 0;
 
+#ifdef CONFIG_MMC_OMAP
 	omap_mmc_notify_cover_event(mmc_device, index, *openp);
+#else
+	pr_warn("MMC: notify cover event not available\n");
+#endif
 }
 
 static int n8x0_mmc_late_init(struct device *dev)
-- 
cgit v1.2.3-70-g09d2


From cea20ca3f3181fc36788a15bc65d1062b96a0a6c Mon Sep 17 00:00:00 2001
From: Linus Torvalds <torvalds@linux-foundation.org>
Date: Mon, 20 Feb 2012 10:24:09 -0800
Subject: i387: fix up some fpu_counter confusion

This makes sure we clear the FPU usage counter for newly created tasks,
just so that we start off in a known state (for example, don't try to
preload the FPU state on the first task switch etc).

It also fixes a thinko in when we increment the fpu_counter at task
switch time, introduced by commit 34ddc81a230b ("i387: re-introduce FPU
state preloading at context switch time").  We should increment the
*new* task fpu_counter, not the old task, and only if we decide to use
that state (whether lazily or preloaded).

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/x86/include/asm/i387.h  | 3 ++-
 arch/x86/kernel/process_32.c | 1 +
 arch/x86/kernel/process_64.c | 1 +
 3 files changed, 4 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/i387.h b/arch/x86/include/asm/i387.h
index a850b4d8d14..8df95849721 100644
--- a/arch/x86/include/asm/i387.h
+++ b/arch/x86/include/asm/i387.h
@@ -348,10 +348,10 @@ static inline fpu_switch_t switch_fpu_prepare(struct task_struct *old, struct ta
 		if (__save_init_fpu(old))
 			fpu_lazy_state_intact(old);
 		__thread_clear_has_fpu(old);
-		old->fpu_counter++;
 
 		/* Don't change CR0.TS if we just switch! */
 		if (fpu.preload) {
+			new->fpu_counter++;
 			__thread_set_has_fpu(new);
 			prefetch(new->thread.fpu.state);
 		} else
@@ -359,6 +359,7 @@ static inline fpu_switch_t switch_fpu_prepare(struct task_struct *old, struct ta
 	} else {
 		old->fpu_counter = 0;
 		if (fpu.preload) {
+			new->fpu_counter++;
 			if (fpu_lazy_restore(new))
 				fpu.preload = 0;
 			else
diff --git a/arch/x86/kernel/process_32.c b/arch/x86/kernel/process_32.c
index 80bfe1ab003..bc32761bc27 100644
--- a/arch/x86/kernel/process_32.c
+++ b/arch/x86/kernel/process_32.c
@@ -214,6 +214,7 @@ int copy_thread(unsigned long clone_flags, unsigned long sp,
 
 	task_user_gs(p) = get_user_gs(regs);
 
+	p->fpu_counter = 0;
 	p->thread.io_bitmap_ptr = NULL;
 	tsk = current;
 	err = -ENOMEM;
diff --git a/arch/x86/kernel/process_64.c b/arch/x86/kernel/process_64.c
index 1fd94bc4279..8ad880b3bc1 100644
--- a/arch/x86/kernel/process_64.c
+++ b/arch/x86/kernel/process_64.c
@@ -286,6 +286,7 @@ int copy_thread(unsigned long clone_flags, unsigned long sp,
 
 	set_tsk_thread_flag(p, TIF_FORK);
 
+	p->fpu_counter = 0;
 	p->thread.io_bitmap_ptr = NULL;
 
 	savesegment(gs, p->thread.gsindex);
-- 
cgit v1.2.3-70-g09d2


From 80ab6f1e8c981b1b6604b2f22e36c917526235cd Mon Sep 17 00:00:00 2001
From: Linus Torvalds <torvalds@linux-foundation.org>
Date: Sun, 19 Feb 2012 11:48:44 -0800
Subject: i387: use 'restore_fpu_checking()' directly in task switching code

This inlines what is usually just a couple of instructions, but more
importantly it also fixes the theoretical error case (can that FPU
restore really ever fail? Maybe we should remove the checking).

We can't start sending signals from within the scheduler, we're much too
deep in the kernel and are holding the runqueue lock etc.  So don't
bother even trying.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/x86/include/asm/i387.h | 17 ++++++++++++++---
 arch/x86/kernel/traps.c     | 40 ++++++++--------------------------------
 2 files changed, 22 insertions(+), 35 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/i387.h b/arch/x86/include/asm/i387.h
index 8df95849721..74c607b37e8 100644
--- a/arch/x86/include/asm/i387.h
+++ b/arch/x86/include/asm/i387.h
@@ -29,7 +29,6 @@ extern unsigned int sig_xstate_size;
 extern void fpu_init(void);
 extern void mxcsr_feature_mask_init(void);
 extern int init_fpu(struct task_struct *child);
-extern void __math_state_restore(struct task_struct *);
 extern void math_state_restore(void);
 extern int dump_fpu(struct pt_regs *, struct user_i387_struct *);
 
@@ -269,6 +268,16 @@ static inline int fpu_restore_checking(struct fpu *fpu)
 
 static inline int restore_fpu_checking(struct task_struct *tsk)
 {
+	/* AMD K7/K8 CPUs don't save/restore FDP/FIP/FOP unless an exception
+	   is pending.  Clear the x87 state here by setting it to fixed
+	   values. "m" is a random variable that should be in L1 */
+	alternative_input(
+		ASM_NOP8 ASM_NOP2,
+		"emms\n\t"	  	/* clear stack tags */
+		"fildl %P[addr]",	/* set F?P to defined value */
+		X86_FEATURE_FXSAVE_LEAK,
+		[addr] "m" (tsk->thread.has_fpu));
+
 	return fpu_restore_checking(&tsk->thread.fpu);
 }
 
@@ -378,8 +387,10 @@ static inline fpu_switch_t switch_fpu_prepare(struct task_struct *old, struct ta
  */
 static inline void switch_fpu_finish(struct task_struct *new, fpu_switch_t fpu)
 {
-	if (fpu.preload)
-		__math_state_restore(new);
+	if (fpu.preload) {
+		if (unlikely(restore_fpu_checking(new)))
+			__thread_fpu_end(new);
+	}
 }
 
 /*
diff --git a/arch/x86/kernel/traps.c b/arch/x86/kernel/traps.c
index 77da5b475ad..4bbe04d9674 100644
--- a/arch/x86/kernel/traps.c
+++ b/arch/x86/kernel/traps.c
@@ -570,37 +570,6 @@ asmlinkage void __attribute__((weak)) smp_threshold_interrupt(void)
 {
 }
 
-/*
- * This gets called with the process already owning the
- * FPU state, and with CR0.TS cleared. It just needs to
- * restore the FPU register state.
- */
-void __math_state_restore(struct task_struct *tsk)
-{
-	/* We need a safe address that is cheap to find and that is already
-	   in L1. We've just brought in "tsk->thread.has_fpu", so use that */
-#define safe_address (tsk->thread.has_fpu)
-
-	/* AMD K7/K8 CPUs don't save/restore FDP/FIP/FOP unless an exception
-	   is pending.  Clear the x87 state here by setting it to fixed
-	   values. safe_address is a random variable that should be in L1 */
-	alternative_input(
-		ASM_NOP8 ASM_NOP2,
-		"emms\n\t"	  	/* clear stack tags */
-		"fildl %P[addr]",	/* set F?P to defined value */
-		X86_FEATURE_FXSAVE_LEAK,
-		[addr] "m" (safe_address));
-
-	/*
-	 * Paranoid restore. send a SIGSEGV if we fail to restore the state.
-	 */
-	if (unlikely(restore_fpu_checking(tsk))) {
-		__thread_fpu_end(tsk);
-		force_sig(SIGSEGV, tsk);
-		return;
-	}
-}
-
 /*
  * 'math_state_restore()' saves the current math information in the
  * old math state array, and gets the new ones from the current task
@@ -631,7 +600,14 @@ void math_state_restore(void)
 	}
 
 	__thread_fpu_begin(tsk);
-	__math_state_restore(tsk);
+	/*
+	 * Paranoid restore. send a SIGSEGV if we fail to restore the state.
+	 */
+	if (unlikely(restore_fpu_checking(tsk))) {
+		__thread_fpu_end(tsk);
+		force_sig(SIGSEGV, tsk);
+		return;
+	}
 
 	tsk->fpu_counter++;
 }
-- 
cgit v1.2.3-70-g09d2


From 7e16838d94b566a17b65231073d179bc04d590c8 Mon Sep 17 00:00:00 2001
From: Linus Torvalds <torvalds@linux-foundation.org>
Date: Sun, 19 Feb 2012 13:27:00 -0800
Subject: i387: support lazy restore of FPU state

This makes us recognize when we try to restore FPU state that matches
what we already have in the FPU on this CPU, and avoids the restore
entirely if so.

To do this, we add two new data fields:

 - a percpu 'fpu_owner_task' variable that gets written any time we
   update the "has_fpu" field, and thus acts as a kind of back-pointer
   to the task that owns the CPU.  The exception is when we save the FPU
   state as part of a context switch - if the save can keep the FPU
   state around, we leave the 'fpu_owner_task' variable pointing at the
   task whose FP state still remains on the CPU.

 - a per-thread 'last_cpu' field, that indicates which CPU that thread
   used its FPU on last.  We update this on every context switch
   (writing an invalid CPU number if the last context switch didn't
   leave the FPU in a lazily usable state), so we know that *that*
   thread has done nothing else with the FPU since.

These two fields together can be used when next switching back to the
task to see if the CPU still matches: if 'fpu_owner_task' matches the
task we are switching to, we know that no other task (or kernel FPU
usage) touched the FPU on this CPU in the meantime, and if the current
CPU number matches the 'last_cpu' field, we know that this thread did no
other FP work on any other CPU, so the FPU state on the CPU must match
what was saved on last context switch.

In that case, we can avoid the 'f[x]rstor' entirely, and just clear the
CR0.TS bit.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/x86/include/asm/i387.h      | 35 +++++++++++++++++++++++------------
 arch/x86/include/asm/processor.h |  3 ++-
 arch/x86/kernel/cpu/common.c     |  2 ++
 arch/x86/kernel/process_32.c     |  2 +-
 arch/x86/kernel/process_64.c     |  2 +-
 5 files changed, 29 insertions(+), 15 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/i387.h b/arch/x86/include/asm/i387.h
index 74c607b37e8..247904945d3 100644
--- a/arch/x86/include/asm/i387.h
+++ b/arch/x86/include/asm/i387.h
@@ -32,6 +32,8 @@ extern int init_fpu(struct task_struct *child);
 extern void math_state_restore(void);
 extern int dump_fpu(struct pt_regs *, struct user_i387_struct *);
 
+DECLARE_PER_CPU(struct task_struct *, fpu_owner_task);
+
 extern user_regset_active_fn fpregs_active, xfpregs_active;
 extern user_regset_get_fn fpregs_get, xfpregs_get, fpregs_soft_get,
 				xstateregs_get;
@@ -276,7 +278,7 @@ static inline int restore_fpu_checking(struct task_struct *tsk)
 		"emms\n\t"	  	/* clear stack tags */
 		"fildl %P[addr]",	/* set F?P to defined value */
 		X86_FEATURE_FXSAVE_LEAK,
-		[addr] "m" (tsk->thread.has_fpu));
+		[addr] "m" (tsk->thread.fpu.has_fpu));
 
 	return fpu_restore_checking(&tsk->thread.fpu);
 }
@@ -288,19 +290,21 @@ static inline int restore_fpu_checking(struct task_struct *tsk)
  */
 static inline int __thread_has_fpu(struct task_struct *tsk)
 {
-	return tsk->thread.has_fpu;
+	return tsk->thread.fpu.has_fpu;
 }
 
 /* Must be paired with an 'stts' after! */
 static inline void __thread_clear_has_fpu(struct task_struct *tsk)
 {
-	tsk->thread.has_fpu = 0;
+	tsk->thread.fpu.has_fpu = 0;
+	percpu_write(fpu_owner_task, NULL);
 }
 
 /* Must be paired with a 'clts' before! */
 static inline void __thread_set_has_fpu(struct task_struct *tsk)
 {
-	tsk->thread.has_fpu = 1;
+	tsk->thread.fpu.has_fpu = 1;
+	percpu_write(fpu_owner_task, tsk);
 }
 
 /*
@@ -345,18 +349,22 @@ typedef struct { int preload; } fpu_switch_t;
  * We don't do that yet, so "fpu_lazy_restore()" always returns
  * false, but some day..
  */
-#define fpu_lazy_restore(tsk) (0)
-#define fpu_lazy_state_intact(tsk) do { } while (0)
+static inline int fpu_lazy_restore(struct task_struct *new, unsigned int cpu)
+{
+	return new == percpu_read_stable(fpu_owner_task) &&
+		cpu == new->thread.fpu.last_cpu;
+}
 
-static inline fpu_switch_t switch_fpu_prepare(struct task_struct *old, struct task_struct *new)
+static inline fpu_switch_t switch_fpu_prepare(struct task_struct *old, struct task_struct *new, int cpu)
 {
 	fpu_switch_t fpu;
 
 	fpu.preload = tsk_used_math(new) && new->fpu_counter > 5;
 	if (__thread_has_fpu(old)) {
-		if (__save_init_fpu(old))
-			fpu_lazy_state_intact(old);
-		__thread_clear_has_fpu(old);
+		if (!__save_init_fpu(old))
+			cpu = ~0;
+		old->thread.fpu.last_cpu = cpu;
+		old->thread.fpu.has_fpu = 0;	/* But leave fpu_owner_task! */
 
 		/* Don't change CR0.TS if we just switch! */
 		if (fpu.preload) {
@@ -367,9 +375,10 @@ static inline fpu_switch_t switch_fpu_prepare(struct task_struct *old, struct ta
 			stts();
 	} else {
 		old->fpu_counter = 0;
+		old->thread.fpu.last_cpu = ~0;
 		if (fpu.preload) {
 			new->fpu_counter++;
-			if (fpu_lazy_restore(new))
+			if (fpu_lazy_restore(new, cpu))
 				fpu.preload = 0;
 			else
 				prefetch(new->thread.fpu.state);
@@ -463,8 +472,10 @@ static inline void kernel_fpu_begin(void)
 		__save_init_fpu(me);
 		__thread_clear_has_fpu(me);
 		/* We do 'stts()' in kernel_fpu_end() */
-	} else
+	} else {
+		percpu_write(fpu_owner_task, NULL);
 		clts();
+	}
 }
 
 static inline void kernel_fpu_end(void)
diff --git a/arch/x86/include/asm/processor.h b/arch/x86/include/asm/processor.h
index f7c89e231c6..58545c97d07 100644
--- a/arch/x86/include/asm/processor.h
+++ b/arch/x86/include/asm/processor.h
@@ -374,6 +374,8 @@ union thread_xstate {
 };
 
 struct fpu {
+	unsigned int last_cpu;
+	unsigned int has_fpu;
 	union thread_xstate *state;
 };
 
@@ -454,7 +456,6 @@ struct thread_struct {
 	unsigned long		trap_no;
 	unsigned long		error_code;
 	/* floating point and extended processor state */
-	unsigned long		has_fpu;
 	struct fpu		fpu;
 #ifdef CONFIG_X86_32
 	/* Virtual 86 mode info */
diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c
index d43cad74f16..b667148dfad 100644
--- a/arch/x86/kernel/cpu/common.c
+++ b/arch/x86/kernel/cpu/common.c
@@ -1044,6 +1044,8 @@ DEFINE_PER_CPU(char *, irq_stack_ptr) =
 
 DEFINE_PER_CPU(unsigned int, irq_count) = -1;
 
+DEFINE_PER_CPU(struct task_struct *, fpu_owner_task);
+
 /*
  * Special IST stacks which the CPU switches to when it calls
  * an IST-marked descriptor entry. Up to 7 stacks (hardware
diff --git a/arch/x86/kernel/process_32.c b/arch/x86/kernel/process_32.c
index bc32761bc27..c08d1ff12b7 100644
--- a/arch/x86/kernel/process_32.c
+++ b/arch/x86/kernel/process_32.c
@@ -304,7 +304,7 @@ __switch_to(struct task_struct *prev_p, struct task_struct *next_p)
 
 	/* never put a printk in __switch_to... printk() calls wake_up*() indirectly */
 
-	fpu = switch_fpu_prepare(prev_p, next_p);
+	fpu = switch_fpu_prepare(prev_p, next_p, cpu);
 
 	/*
 	 * Reload esp0.
diff --git a/arch/x86/kernel/process_64.c b/arch/x86/kernel/process_64.c
index 8ad880b3bc1..cfa5c90c01d 100644
--- a/arch/x86/kernel/process_64.c
+++ b/arch/x86/kernel/process_64.c
@@ -389,7 +389,7 @@ __switch_to(struct task_struct *prev_p, struct task_struct *next_p)
 	unsigned fsindex, gsindex;
 	fpu_switch_t fpu;
 
-	fpu = switch_fpu_prepare(prev_p, next_p);
+	fpu = switch_fpu_prepare(prev_p, next_p, cpu);
 
 	/*
 	 * Reload esp0, LDT and the page table pointer:
-- 
cgit v1.2.3-70-g09d2


From a38449ef596b345e13a8f9b7d5cd9fedb8fcf921 Mon Sep 17 00:00:00 2001
From: Steven Rostedt <srostedt@redhat.com>
Date: Mon, 20 Feb 2012 15:29:34 -0500
Subject: x86: Specify a size for the cmp in the NMI handler

Linus noticed that the cmp used to check if the code segment is
__KERNEL_CS or not did not specify a size. Perhaps it does not matter
as H. Peter Anvin noted that user space can not set the bottom two
bits of the %cs register. But it's best not to let the assembly choose
and change things between different versions of gas, but instead just
pick the size.

Four bytes are used to compare the saved code segment against
__KERNEL_CS. Perhaps this might mess up Xen, but we can fix that when
the time comes.

Also I noticed that there was another non-specified cmp that checks
the special stack variable if it is 1 or 0. This too probably doesn't
matter what cmp is used, but this patch uses cmpl just to make it non
ambiguous.

Link: http://lkml.kernel.org/r/CA+55aFxfAn9MWRgS3O5k2tqN5ys1XrhSFVO5_9ZAoZKDVgNfGA@mail.gmail.com

Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
---
 arch/x86/kernel/entry_64.S | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/entry_64.S b/arch/x86/kernel/entry_64.S
index debd851de6f..1333d985177 100644
--- a/arch/x86/kernel/entry_64.S
+++ b/arch/x86/kernel/entry_64.S
@@ -1535,14 +1535,14 @@ ENTRY(nmi)
 	 * If %cs was not the kernel segment, then the NMI triggered in user
 	 * space, which means it is definitely not nested.
 	 */
-	cmp $__KERNEL_CS, 16(%rsp)
+	cmpl $__KERNEL_CS, 16(%rsp)
 	jne first_nmi
 
 	/*
 	 * Check the special variable on the stack to see if NMIs are
 	 * executing.
 	 */
-	cmp $1, -8(%rsp)
+	cmpl $1, -8(%rsp)
 	je nested_nmi
 
 	/*
-- 
cgit v1.2.3-70-g09d2


From 27e74da9800289e69ba907777df1e2085231eff7 Mon Sep 17 00:00:00 2001
From: Linus Torvalds <torvalds@linux-foundation.org>
Date: Mon, 20 Feb 2012 19:34:10 -0800
Subject: i387: export 'fpu_owner_task' per-cpu variable

(And define it properly for x86-32, which had its 'current_task'
declaration in separate from x86-64)

Bitten by my dislike for modules on the machines I use, and the fact
that apparently nobody else actually wanted to test the patches I sent
out.

Snif. Nobody else cares.

Anyway, we probably should uninline the 'kernel_fpu_begin()' function
that is what modules actually use and that references this, but this is
the minimal fix for now.

Reported-by: Josh Boyer <jwboyer@gmail.com>
Reported-and-tested-by: Jongman Heo <jongman.heo@samsung.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/x86/kernel/cpu/common.c | 3 +++
 1 file changed, 3 insertions(+)

(limited to 'arch')

diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c
index b667148dfad..c0f7d68d318 100644
--- a/arch/x86/kernel/cpu/common.c
+++ b/arch/x86/kernel/cpu/common.c
@@ -1045,6 +1045,7 @@ DEFINE_PER_CPU(char *, irq_stack_ptr) =
 DEFINE_PER_CPU(unsigned int, irq_count) = -1;
 
 DEFINE_PER_CPU(struct task_struct *, fpu_owner_task);
+EXPORT_PER_CPU_SYMBOL(fpu_owner_task);
 
 /*
  * Special IST stacks which the CPU switches to when it calls
@@ -1113,6 +1114,8 @@ void debug_stack_reset(void)
 
 DEFINE_PER_CPU(struct task_struct *, current_task) = &init_task;
 EXPORT_PER_CPU_SYMBOL(current_task);
+DEFINE_PER_CPU(struct task_struct *, fpu_owner_task);
+EXPORT_PER_CPU_SYMBOL(fpu_owner_task);
 
 #ifdef CONFIG_CC_STACKPROTECTOR
 DEFINE_PER_CPU_ALIGNED(struct stack_canary, stack_canary);
-- 
cgit v1.2.3-70-g09d2


From 910ba598c818243cf3de2f97e03c49948bbb0511 Mon Sep 17 00:00:00 2001
From: Santosh Shilimkar <santosh.shilimkar@ti.com>
Date: Tue, 21 Feb 2012 10:24:22 +0100
Subject: ARM: 7336/1: smp_twd: Don't register CPUFREQ notifiers if local
 timers are not initialised

Current ARM local timer code registers CPUFREQ notifiers even in case
the twd_timer_setup() isn't called. That seems to be wrong and
would eventually lead to kernel crash on the CPU frequency transitions
on the SOCs where the local timer doesn't exist or broken because of
hardware BUG. Fix it by testing twd_evt and *__this_cpu_ptr(twd_evt).

The issue was observed with v3.3-rc3 and building an OMAP2+ kernel
on OMAP3 SOC which doesn't have TWD.

Below is the dump for reference :

 Unable to handle kernel paging request at virtual address 007e900
 pgd = cdc20000
 [007e9000] *pgd=00000000
 Internal error: Oops: 5 [#1] SMP
 Modules linked in:
 CPU: 0    Not tainted  (3.3.0-rc3-pm+debug+initramfs #9)
 PC is at twd_update_frequency+0x34/0x48
 LR is at twd_update_frequency+0x10/0x48
 pc : [<c001382c>]    lr : [<c0013808>]    psr: 60000093
 sp : ce311dd8  ip : 00000000  fp : 00000000
 r10: 00000000  r9 : 00000001  r8 : ce310000
 r7 : c0440458  r6 : c00137f8  r5 : 00000000  r4 : c0947a74
 r3 : 00000000  r2 : 007e9000  r1 : 00000000  r0 : 00000000
 Flags: nZCv  IRQs off  FIQs on  Mode SVC_32  ISA ARM  Segment usr
 Control: 10c5387d  Table: 8dc20019  DAC: 00000015
 Process sh (pid: 599, stack limit = 0xce3102f8)
 Stack: (0xce311dd8 to 0xce312000)
 1dc0:                                                       6000c
 1de0: 00000001 00000002 00000000 00000000 00000000 00000000 00000
 1e00: ffffffff c093d8f0 00000000 ce311ebc 00000001 00000001 ce310
 1e20: c001386c c0437c4c c0e95b60 c0e95ba8 00000001 c0e95bf8 ffff4
 1e40: 00000000 00000000 c005ef74 ce310000 c0435cf0 ce311ebc 00000
 1e60: ce352b40 0007a120 c08d5108 c08ba040 c08ba040 c005f030 00000
 1e80: c08bc554 c032fe2c 0007a120 c08d4b64 ce352b40 c08d8618 ffff8
 1ea0: c08ba040 c033364c ce311ecc c0433b50 00000002 ffffffea c0330
 1ec0: 0007a120 0007a120 22222201 00000000 22222222 00000000 ce357
 1ee0: ce3d6000 cdc2aed8 ce352ba0 c0470164 00000002 c032f47c 00034
 1f00: c0331cac ce352b40 00000007 c032f6d0 ce352bbc 0003d090 c0930
 1f20: c093d8bc c03306a4 00000007 ce311f80 00000007 cdc2aec0 ce358
 1f40: ce8d20c0 00000007 b6fe5000 ce311f80 00000007 ce310000 0000c
 1f60: c000de74 ce987400 ce8d20c0 b6fe5000 00000000 00000000 0000c
 1f80: 00000000 00000000 001fbac8 00000000 00000007 001fbac8 00004
 1fa0: c000df04 c000dd60 00000007 001fbac8 00000001 b6fe5000 00000
 1fc0: 00000007 001fbac8 00000007 00000004 b6fe5000 00000000 00202
 1fe0: 00000000 beb565f8 00101ffc 00008e8c 60000010 00000001 00000
 [<c001382c>] (twd_update_frequency+0x34/0x48) from [<c008ac4c>] )
 [<c008ac4c>] (smp_call_function_single+0x17c/0x1c8) from [<c0013)
 [<c0013890>] (twd_cpufreq_transition+0x24/0x30) from [<c0437c4c>)
 [<c0437c4c>] (notifier_call_chain+0x44/0x84) from [<c005efe4>] ()
 [<c005efe4>] (__srcu_notifier_call_chain+0x70/0xa4) from [<c005f)
 [<c005f030>] (srcu_notifier_call_chain+0x18/0x20) from [<c032fe2)
 [<c032fe2c>] (cpufreq_notify_transition+0xc8/0x1b0) from [<c0333)
 [<c033364c>] (omap_target+0x1b4/0x28c) from [<c032f47c>] (__cpuf)
 [<c032f47c>] (__cpufreq_driver_target+0x50/0x64) from [<c0331d24)
 [<c0331d24>] (cpufreq_set+0x78/0x98) from [<c032f6d0>] (store_sc)
 [<c032f6d0>] (store_scaling_setspeed+0x5c/0x74) from [<c03306a4>)
 [<c03306a4>] (store+0x58/0x74) from [<c014d868>] (sysfs_write_fi)
 [<c014d868>] (sysfs_write_file+0x80/0xb4) from [<c00f2c2c>] (vfs)
 [<c00f2c2c>] (vfs_write+0xa8/0x138) from [<c00f2e9c>] (sys_write)
 [<c00f2e9c>] (sys_write+0x40/0x6c) from [<c000dd60>] (ret_fast_s)
 Code: e594300c e792210c e1a01000 e5840004 (e7930002)
 ---[ end trace 5da3b5167c1ecdda ]---

Reported-by: Kevin Hilman <khilman@ti.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Tested-by: Kevin Hilman <khilman@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/kernel/smp_twd.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/kernel/smp_twd.c b/arch/arm/kernel/smp_twd.c
index 4285daa077b..7a79b24597b 100644
--- a/arch/arm/kernel/smp_twd.c
+++ b/arch/arm/kernel/smp_twd.c
@@ -129,7 +129,7 @@ static struct notifier_block twd_cpufreq_nb = {
 
 static int twd_cpufreq_init(void)
 {
-	if (!IS_ERR(twd_clk))
+	if (twd_evt && *__this_cpu_ptr(twd_evt) && !IS_ERR(twd_clk))
 		return cpufreq_register_notifier(&twd_cpufreq_nb,
 			CPUFREQ_TRANSITION_NOTIFIER);
 
-- 
cgit v1.2.3-70-g09d2


From e23e8c0690d2952dce53e712d01d5b2179f98b64 Mon Sep 17 00:00:00 2001
From: Myron Stowe <mstowe@redhat.com>
Date: Tue, 7 Feb 2012 15:26:44 -0700
Subject: ARM/PCI: Remove ARM's duplicate definition of 'pcibios_max_latency'

The patch series to re-factor PCI's 'latency timer' setup (re:
http://marc.info/?l=linux-kernel&m=131983853831049&w=2) forgot to
remove the ARM specific definition of 'pcibios_max_latency' once such
had been moved into the pci core resulting in ARM related compile
errors -
  drivers/built-in.o:(.data+0x230): multiple definition of
  `pcibios_max_latency'
  arch/arm/common/built-in.o:(.data+0x40c): first defined here
  make[1]: *** [vmlinux.o] Error 1

In the series, patch 2/16 (commit 168c8619fd8) converted the ARM
specific version of 'pcibios_set_master()' to a non-inlined version.
This was done in preperation for hosting it up into PCI's core, which
was done in patch 10/16 (commit 96c5590058d) of the series (and
where the removal of ARM's 'pcibios_max_latency' was overlooked).

Reported-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Myron Stowe <myron.stowe@redhat.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/common/it8152.c | 7 -------
 1 file changed, 7 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/common/it8152.c b/arch/arm/common/it8152.c
index d1bcd7b13eb..fb1f1cfce60 100644
--- a/arch/arm/common/it8152.c
+++ b/arch/arm/common/it8152.c
@@ -320,13 +320,6 @@ err0:
 	return -EBUSY;
 }
 
-/*
- * If we set up a device for bus mastering, we need to check the latency
- * timer as we don't have even crappy BIOSes to set it properly.
- * The implementation is from arch/i386/pci/i386.c
- */
-unsigned int pcibios_max_latency = 255;
-
 /* ITE bridge requires setting latency timer to avoid early bus access
    termination by PCI bus master devices
 */
-- 
cgit v1.2.3-70-g09d2


From 3ddd4d0c629f3d013aa1ab24bb0546dfe342ff94 Mon Sep 17 00:00:00 2001
From: Russell King <rmk+kernel@arm.linux.org.uk>
Date: Wed, 15 Feb 2012 11:28:06 +0000
Subject: ARM: OMAP: fix voltage domain build errors with PM_OPP disabled

The voltage domain code wants the voltage tables, which are in the
opp*.c files.  These files aren't built when PM_OPP is disabled,
causing the following build errors at link time:

twl-common.c:(.init.text+0x2e48): undefined reference to `omap34xx_vddmpu_volt_data'
twl-common.c:(.init.text+0x2e4c): undefined reference to `omap34xx_vddcore_volt_data'
twl-common.c:(.init.text+0x2e5c): undefined reference to `omap36xx_vddmpu_volt_data'
twl-common.c:(.init.text+0x2e60): undefined reference to `omap36xx_vddcore_volt_data'
twl-common.c:(.init.text+0x2830): undefined reference to `omap44xx_vdd_mpu_volt_data'
twl-common.c:(.init.text+0x283c): undefined reference to `omap44xx_vdd_iva_volt_data'
twl-common.c:(.init.text+0x2844): undefined reference to `omap44xx_vdd_core_volt_data'

Acked-by: Kevin Hilman <khilman@ti.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-omap2/voltagedomains3xxx_data.c | 2 ++
 arch/arm/mach-omap2/voltagedomains44xx_data.c | 2 ++
 2 files changed, 4 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/voltagedomains3xxx_data.c b/arch/arm/mach-omap2/voltagedomains3xxx_data.c
index c005e2f5e38..57db2038b23 100644
--- a/arch/arm/mach-omap2/voltagedomains3xxx_data.c
+++ b/arch/arm/mach-omap2/voltagedomains3xxx_data.c
@@ -108,6 +108,7 @@ void __init omap3xxx_voltagedomains_init(void)
 	 * XXX Will depend on the process, validation, and binning
 	 * for the currently-running IC
 	 */
+#ifdef CONFIG_PM_OPP
 	if (cpu_is_omap3630()) {
 		omap3_voltdm_mpu.volt_data = omap36xx_vddmpu_volt_data;
 		omap3_voltdm_core.volt_data = omap36xx_vddcore_volt_data;
@@ -115,6 +116,7 @@ void __init omap3xxx_voltagedomains_init(void)
 		omap3_voltdm_mpu.volt_data = omap34xx_vddmpu_volt_data;
 		omap3_voltdm_core.volt_data = omap34xx_vddcore_volt_data;
 	}
+#endif
 
 	if (cpu_is_omap3517() || cpu_is_omap3505())
 		voltdms = voltagedomains_am35xx;
diff --git a/arch/arm/mach-omap2/voltagedomains44xx_data.c b/arch/arm/mach-omap2/voltagedomains44xx_data.c
index 4e11d022595..c3115f6853d 100644
--- a/arch/arm/mach-omap2/voltagedomains44xx_data.c
+++ b/arch/arm/mach-omap2/voltagedomains44xx_data.c
@@ -100,9 +100,11 @@ void __init omap44xx_voltagedomains_init(void)
 	 * XXX Will depend on the process, validation, and binning
 	 * for the currently-running IC
 	 */
+#ifdef CONFIG_PM_OPP
 	omap4_voltdm_mpu.volt_data = omap44xx_vdd_mpu_volt_data;
 	omap4_voltdm_iva.volt_data = omap44xx_vdd_iva_volt_data;
 	omap4_voltdm_core.volt_data = omap44xx_vdd_core_volt_data;
+#endif
 
 	for (i = 0; voltdm = voltagedomains_omap4[i], voltdm; i++)
 		voltdm->sys_clk.name = sys_clk_name;
-- 
cgit v1.2.3-70-g09d2


From 5180bb392a8aab5233e6db858ac1d8371533e20f Mon Sep 17 00:00:00 2001
From: Eric Paris <eparis@redhat.com>
Date: Tue, 21 Feb 2012 11:26:55 -0500
Subject: ARM/audit: include audit header and fix audit arch

Both bugs being fixed were introduced in:
29ef73b7a823b77a7cd0bdd7d7cded3fb6c2587b

Include linux/audit.h to fix below build errors:

  CC      arch/arm/kernel/ptrace.o
arch/arm/kernel/ptrace.c: In function 'syscall_trace':
arch/arm/kernel/ptrace.c:919: error: implicit declaration of function 'audit_syscall_exit'
arch/arm/kernel/ptrace.c:921: error: implicit declaration of function 'audit_syscall_entry'
arch/arm/kernel/ptrace.c:921: error: 'AUDIT_ARCH_ARMEB' undeclared (first use in this function)
arch/arm/kernel/ptrace.c:921: error: (Each undeclared identifier is reported only once
arch/arm/kernel/ptrace.c:921: error: for each function it appears in.)
make[1]: *** [arch/arm/kernel/ptrace.o] Error 1
make: *** [arch/arm/kernel] Error 2

This part of the patch is:
Reported-by: Axel Lin <axel.lin@gmail.com>
Reported-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
(They both provided patches to fix it)

This patch also (at the request of the list) fixes the fact that
ARM has both LE and BE versions however the audit code was called as if
it was always BE.  If audit userspace were to try to interpret the bits
it got from a LE system it would obviously do so incorrectly.  Fix this
by using the right arch flag on the right system.

This part of the patch is:
Reported-by: Russell King - ARM Linux <linux@arm.linux.org.uk>

Signed-off-by: Eric Paris <eparis@redhat.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/kernel/ptrace.c | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/kernel/ptrace.c b/arch/arm/kernel/ptrace.c
index e33870ff0ac..ede6443c34d 100644
--- a/arch/arm/kernel/ptrace.c
+++ b/arch/arm/kernel/ptrace.c
@@ -23,6 +23,7 @@
 #include <linux/perf_event.h>
 #include <linux/hw_breakpoint.h>
 #include <linux/regset.h>
+#include <linux/audit.h>
 
 #include <asm/pgtable.h>
 #include <asm/system.h>
@@ -904,6 +905,12 @@ long arch_ptrace(struct task_struct *child, long request,
 	return ret;
 }
 
+#ifdef __ARMEB__
+#define AUDIT_ARCH_NR AUDIT_ARCH_ARMEB
+#else
+#define AUDIT_ARCH_NR AUDIT_ARCH_ARM
+#endif
+
 asmlinkage int syscall_trace(int why, struct pt_regs *regs, int scno)
 {
 	unsigned long ip;
@@ -918,7 +925,7 @@ asmlinkage int syscall_trace(int why, struct pt_regs *regs, int scno)
 	if (!ip)
 		audit_syscall_exit(regs);
 	else
-		audit_syscall_entry(AUDIT_ARCH_ARMEB, scno, regs->ARM_r0,
+		audit_syscall_entry(AUDIT_ARCH_NR, scno, regs->ARM_r0,
 				    regs->ARM_r1, regs->ARM_r2, regs->ARM_r3);
 
 	if (!test_thread_flag(TIF_SYSCALL_TRACE))
-- 
cgit v1.2.3-70-g09d2


From ebe8f7e59d0de3a97d264220deeffa90b8b14003 Mon Sep 17 00:00:00 2001
From: "Arnout Vandecappelle (Essensium/Mind)" <arnout@mind.be>
Date: Mon, 13 Feb 2012 09:35:22 +0100
Subject: OMAP3 EVM: remove out-of-bounds array access of gpio_leds

Otherwise we can get the following warning on some compilers:

arch/arm/mach-omap2/board-omap3evm.c:384:11:
warning: array subscript is above array bounds

The omap3evm BSP enables a GPIO LED on the twl4030 chip.  However,
the static gpio_leds array doesn't have an entry for it.  This is
most likely a copy-and-paste error, because it has been in there
since the first commit of the omap3evm BSP (53c5ec31).

Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
[tony@atomide.com: updated comments with the warning]
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/board-omap3evm.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c
index c775bead149..c877236a844 100644
--- a/arch/arm/mach-omap2/board-omap3evm.c
+++ b/arch/arm/mach-omap2/board-omap3evm.c
@@ -381,7 +381,7 @@ static int omap3evm_twl_gpio_setup(struct device *dev,
 	gpio_request_one(gpio + 7, GPIOF_OUT_INIT_LOW, "EN_DVI");
 
 	/* TWL4030_GPIO_MAX + 1 == ledB (out, active low LED) */
-	gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1;
+	gpio_leds[0].gpio = gpio + TWL4030_GPIO_MAX + 1;
 
 	platform_device_register(&leds_gpio);
 
-- 
cgit v1.2.3-70-g09d2


From 2226957ed2d84add88368aa4c4f69eae4b4843a3 Mon Sep 17 00:00:00 2001
From: Tony Lindgren <tony@atomide.com>
Date: Tue, 21 Feb 2012 16:33:08 -0800
Subject: ARM: OMAP1: Fix out-of-bounds array access for Innovator

Otherwise we can get the following on some compilers:

arch/arm/mach-omap1/board-innovator.c:419:19: warning:
array subscript is above array bounds [-Warray-bounds]
arch/arm/mach-omap1/board-innovator.c:425:19: warning:
array subscript is above array bounds [-Warray-bounds]

Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap1/board-innovator.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-omap1/board-innovator.c b/arch/arm/mach-omap1/board-innovator.c
index 309369ea697..be2002f42de 100644
--- a/arch/arm/mach-omap1/board-innovator.c
+++ b/arch/arm/mach-omap1/board-innovator.c
@@ -416,13 +416,13 @@ static void __init innovator_init(void)
 #ifdef CONFIG_ARCH_OMAP15XX
 	if (cpu_is_omap1510()) {
 		omap1_usb_init(&innovator1510_usb_config);
-		innovator_config[1].data = &innovator1510_lcd_config;
+		innovator_config[0].data = &innovator1510_lcd_config;
 	}
 #endif
 #ifdef CONFIG_ARCH_OMAP16XX
 	if (cpu_is_omap1610()) {
 		omap1_usb_init(&h2_usb_config);
-		innovator_config[1].data = &innovator1610_lcd_config;
+		innovator_config[0].data = &innovator1610_lcd_config;
 	}
 #endif
 	omap_board_config = innovator_config;
-- 
cgit v1.2.3-70-g09d2


From faf309009e2e18d30c032b7d9479f29b91677c37 Mon Sep 17 00:00:00 2001
From: Linus Torvalds <torvalds@linux-foundation.org>
Date: Tue, 21 Feb 2012 17:24:20 -0800
Subject: sys_poll: fix incorrect type for 'timeout' parameter

The 'poll()' system call timeout parameter is supposed to be 'int', not
'long'.

Now, the reason this matters is that right now 32-bit compat mode is
broken on at least x86-64, because the 32-bit code just calls
'sys_poll()' directly on x86-64, and the 32-bit argument will have been
zero-extended, turning a signed 'int' into a large unsigned 'long'
value.

We could just introduce a 'compat_sys_poll()' function for this, and
that may eventually be what we have to do, but since the actual standard
poll() semantics is *supposed* to be 'int', and since at least on x86-64
glibc sign-extends the argument before invocing the system call (so
nobody can actually use a 64-bit timeout value in user space _anyway_,
even in 64-bit binaries), the simpler solution would seem to be to just
fix the definition of the system call to match what it should have been
from the very start.

If it turns out that somebody somehow circumvents the user-level libc
64-bit sign extension and actually uses a large unsigned 64-bit timeout
despite that not being how poll() is supposed to work, we will need to
do the compat_sys_poll() approach.

Reported-by: Thomas Meyer <thomas@m3y3r.de>
Acked-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/s390/kernel/compat_wrapper.S | 2 +-
 fs/select.c                       | 2 +-
 include/linux/syscalls.h          | 2 +-
 3 files changed, 3 insertions(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/s390/kernel/compat_wrapper.S b/arch/s390/kernel/compat_wrapper.S
index 18c51df9fe0..ff605a39cf4 100644
--- a/arch/s390/kernel/compat_wrapper.S
+++ b/arch/s390/kernel/compat_wrapper.S
@@ -662,7 +662,7 @@ ENTRY(sys32_getresuid16_wrapper)
 ENTRY(sys32_poll_wrapper)
 	llgtr	%r2,%r2			# struct pollfd *
 	llgfr	%r3,%r3			# unsigned int
-	lgfr	%r4,%r4			# long
+	lgfr	%r4,%r4			# int
 	jg	sys_poll		# branch to system call
 
 ENTRY(sys32_setresgid16_wrapper)
diff --git a/fs/select.c b/fs/select.c
index d33418fdc85..e782258d0de 100644
--- a/fs/select.c
+++ b/fs/select.c
@@ -912,7 +912,7 @@ static long do_restart_poll(struct restart_block *restart_block)
 }
 
 SYSCALL_DEFINE3(poll, struct pollfd __user *, ufds, unsigned int, nfds,
-		long, timeout_msecs)
+		int, timeout_msecs)
 {
 	struct timespec end_time, *to = NULL;
 	int ret;
diff --git a/include/linux/syscalls.h b/include/linux/syscalls.h
index 515669fa3c1..8ec1153ff57 100644
--- a/include/linux/syscalls.h
+++ b/include/linux/syscalls.h
@@ -624,7 +624,7 @@ asmlinkage long sys_socketpair(int, int, int, int __user *);
 asmlinkage long sys_socketcall(int call, unsigned long __user *args);
 asmlinkage long sys_listen(int, int);
 asmlinkage long sys_poll(struct pollfd __user *ufds, unsigned int nfds,
-				long timeout);
+				int timeout);
 asmlinkage long sys_select(int n, fd_set __user *inp, fd_set __user *outp,
 			fd_set __user *exp, struct timeval __user *tvp);
 asmlinkage long sys_old_select(struct sel_arg_struct __user *arg);
-- 
cgit v1.2.3-70-g09d2


From 07d2f1a54a78a648093f4f3a33aa86b03cf9e25f Mon Sep 17 00:00:00 2001
From: Rusty Russell <rusty@rustcorp.com.au>
Date: Wed, 15 Feb 2012 17:51:26 +0000
Subject: powerpc: Remove references to cpu_*_map

This has been obsolescent for a while; time for the final push.

In adjacent context, replaced old cpus_* with cpumask_*.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/platforms/wsp/smp.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/powerpc/platforms/wsp/smp.c b/arch/powerpc/platforms/wsp/smp.c
index 71bd105f386..0ba103ae83a 100644
--- a/arch/powerpc/platforms/wsp/smp.c
+++ b/arch/powerpc/platforms/wsp/smp.c
@@ -71,7 +71,7 @@ int __devinit smp_a2_kick_cpu(int nr)
 
 static int __init smp_a2_probe(void)
 {
-	return cpus_weight(cpu_possible_map);
+	return num_possible_cpus();
 }
 
 static struct smp_ops_t a2_smp_ops = {
-- 
cgit v1.2.3-70-g09d2


From 922b9f86a020258d3ea3bfed27251efaed7a03a3 Mon Sep 17 00:00:00 2001
From: Michael Ellerman <michael@ellerman.id.au>
Date: Mon, 20 Feb 2012 21:32:30 +0000
Subject: powerpc: Fix program check handling when lockdep is enabled

In commit 54321242afe ("Disable interrupts early in Program Check"), we
switched from enabling to disabling interrupts in program_check_common.

Whereas ENABLE_INTS leaves r3 untouched, if lockdep is enabled DISABLE_INTS
calls into lockdep code and will clobber r3. That means we pass a bogus
struct pt_regs* into program_check_exception() and all hell breaks loose.

So load our regs pointer into r3 after we call DISABLE_INTS.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/kernel/exceptions-64s.S | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/powerpc/kernel/exceptions-64s.S b/arch/powerpc/kernel/exceptions-64s.S
index 3844ca7c509..15c5a4f6de0 100644
--- a/arch/powerpc/kernel/exceptions-64s.S
+++ b/arch/powerpc/kernel/exceptions-64s.S
@@ -774,8 +774,8 @@ alignment_common:
 program_check_common:
 	EXCEPTION_PROLOG_COMMON(0x700, PACA_EXGEN)
 	bl	.save_nvgprs
-	addi	r3,r1,STACK_FRAME_OVERHEAD
 	DISABLE_INTS
+	addi	r3,r1,STACK_FRAME_OVERHEAD
 	bl	.program_check_exception
 	b	.ret_from_except
 
-- 
cgit v1.2.3-70-g09d2


From 18b246fa60dd4bfc71c78d669e2ffaa5df454d6a Mon Sep 17 00:00:00 2001
From: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Date: Wed, 22 Feb 2012 16:48:32 +1100
Subject: powerpc: Fix various issues with return to userspace

We have a few problems when returning to userspace. This is a
quick set of fixes for 3.3, I'll look into a more comprehensive
rework for 3.4. This fixes:

 - We kept interrupts soft-disabled when schedule'ing or calling
do_signal when returning to userspace as a result of a hardware
interrupt.

 - Rename do_signal to do_notify_resume like all other archs (and
do_signal_pending back to do_signal, which it was before Roland
changed it).

 - Add the missing call to key_replace_session_keyring() to
do_notify_resume().

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
---
 arch/powerpc/kernel/entry_32.S |  2 +-
 arch/powerpc/kernel/entry_64.S |  6 +++++-
 arch/powerpc/kernel/signal.c   | 12 ++++++++----
 arch/powerpc/kernel/signal.h   |  2 +-
 4 files changed, 15 insertions(+), 7 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/kernel/entry_32.S b/arch/powerpc/kernel/entry_32.S
index 4f80cf1ce77..3e57a00b8cb 100644
--- a/arch/powerpc/kernel/entry_32.S
+++ b/arch/powerpc/kernel/entry_32.S
@@ -1213,7 +1213,7 @@ do_user_signal:			/* r10 contains MSR_KERNEL here */
 	stw	r3,_TRAP(r1)
 2:	addi	r3,r1,STACK_FRAME_OVERHEAD
 	mr	r4,r9
-	bl	do_signal
+	bl	do_notify_resume
 	REST_NVGPRS(r1)
 	b	recheck
 
diff --git a/arch/powerpc/kernel/entry_64.S b/arch/powerpc/kernel/entry_64.S
index d834425186a..866462cbe2d 100644
--- a/arch/powerpc/kernel/entry_64.S
+++ b/arch/powerpc/kernel/entry_64.S
@@ -751,12 +751,16 @@ user_work:
 
 	andi.	r0,r4,_TIF_NEED_RESCHED
 	beq	1f
+	li	r5,1
+	TRACE_AND_RESTORE_IRQ(r5);
 	bl	.schedule
 	b	.ret_from_except_lite
 
 1:	bl	.save_nvgprs
+	li	r5,1
+	TRACE_AND_RESTORE_IRQ(r5);
 	addi	r3,r1,STACK_FRAME_OVERHEAD
-	bl	.do_signal
+	bl	.do_notify_resume
 	b	.ret_from_except
 
 unrecov_restore:
diff --git a/arch/powerpc/kernel/signal.c b/arch/powerpc/kernel/signal.c
index 2300426e531..ac6e437b102 100644
--- a/arch/powerpc/kernel/signal.c
+++ b/arch/powerpc/kernel/signal.c
@@ -11,6 +11,7 @@
 
 #include <linux/tracehook.h>
 #include <linux/signal.h>
+#include <linux/key.h>
 #include <asm/hw_breakpoint.h>
 #include <asm/uaccess.h>
 #include <asm/unistd.h>
@@ -113,8 +114,9 @@ static void check_syscall_restart(struct pt_regs *regs, struct k_sigaction *ka,
 	}
 }
 
-static int do_signal_pending(sigset_t *oldset, struct pt_regs *regs)
+static int do_signal(struct pt_regs *regs)
 {
+	sigset_t *oldset;
 	siginfo_t info;
 	int signr;
 	struct k_sigaction ka;
@@ -123,7 +125,7 @@ static int do_signal_pending(sigset_t *oldset, struct pt_regs *regs)
 
 	if (current_thread_info()->local_flags & _TLF_RESTORE_SIGMASK)
 		oldset = &current->saved_sigmask;
-	else if (!oldset)
+	else
 		oldset = &current->blocked;
 
 	signr = get_signal_to_deliver(&info, &ka, regs, NULL);
@@ -191,14 +193,16 @@ static int do_signal_pending(sigset_t *oldset, struct pt_regs *regs)
 	return ret;
 }
 
-void do_signal(struct pt_regs *regs, unsigned long thread_info_flags)
+void do_notify_resume(struct pt_regs *regs, unsigned long thread_info_flags)
 {
 	if (thread_info_flags & _TIF_SIGPENDING)
-		do_signal_pending(NULL, regs);
+		do_signal(regs);
 
 	if (thread_info_flags & _TIF_NOTIFY_RESUME) {
 		clear_thread_flag(TIF_NOTIFY_RESUME);
 		tracehook_notify_resume(regs);
+		if (current->replacement_session_keyring)
+			key_replace_session_keyring();
 	}
 }
 
diff --git a/arch/powerpc/kernel/signal.h b/arch/powerpc/kernel/signal.h
index 6c0ddfc0603..8dde973aaaf 100644
--- a/arch/powerpc/kernel/signal.h
+++ b/arch/powerpc/kernel/signal.h
@@ -12,7 +12,7 @@
 
 #define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP)))
 
-extern void do_signal(struct pt_regs *regs, unsigned long thread_info_flags);
+extern void do_notify_resume(struct pt_regs *regs, unsigned long thread_info_flags);
 
 extern void __user * get_sigframe(struct k_sigaction *ka, struct pt_regs *regs,
 				  size_t frame_size, int is_32);
-- 
cgit v1.2.3-70-g09d2


From 3f806e50981825fa56a7f1938f24c0680816be45 Mon Sep 17 00:00:00 2001
From: Borislav Petkov <bp@alien8.de>
Date: Fri, 3 Feb 2012 20:18:01 +0100
Subject: x86/mce/AMD: Fix UP build error

141168c36cde ("x86: Simplify code by removing a !SMP #ifdefs
from 'struct cpuinfo_x86'") removed a bunch of CONFIG_SMP ifdefs
around code touching struct cpuinfo_x86 members but also caused
the following build error with Randy's randconfigs:

mce_amd.c:(.cpuinit.text+0x4723): undefined reference to `cpu_llc_shared_map'

Restore the #ifdef in threshold_create_bank() which creates
symlinks on the non-BSP CPUs.

There's a better patch series being worked on by Kevin Winchester
which will solve this in a cleaner fashion, but that series is
too ambitious for v3.3 merging - so we first queue up this trivial
fix and then do the rest for v3.4.

Signed-off-by: Borislav Petkov <bp@alien8.de>
Acked-by: Kevin Winchester <kjwinchester@gmail.com>
Cc: Randy Dunlap <rdunlap@xenotime.net>
Cc: Nick Bowler <nbowler@elliptictech.com>
Link: http://lkml.kernel.org/r/20120203191801.GA2846@x1.osrc.amd.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/cpu/mcheck/mce_amd.c | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'arch')

diff --git a/arch/x86/kernel/cpu/mcheck/mce_amd.c b/arch/x86/kernel/cpu/mcheck/mce_amd.c
index 786e76a8632..e4eeaaf58a4 100644
--- a/arch/x86/kernel/cpu/mcheck/mce_amd.c
+++ b/arch/x86/kernel/cpu/mcheck/mce_amd.c
@@ -528,6 +528,7 @@ static __cpuinit int threshold_create_bank(unsigned int cpu, unsigned int bank)
 
 	sprintf(name, "threshold_bank%i", bank);
 
+#ifdef CONFIG_SMP
 	if (cpu_data(cpu).cpu_core_id && shared_bank[bank]) {	/* symlink */
 		i = cpumask_first(cpu_llc_shared_mask(cpu));
 
@@ -553,6 +554,7 @@ static __cpuinit int threshold_create_bank(unsigned int cpu, unsigned int bank)
 
 		goto out;
 	}
+#endif
 
 	b = kzalloc(sizeof(struct threshold_bank), GFP_KERNEL);
 	if (!b) {
-- 
cgit v1.2.3-70-g09d2


From e4b0b2cbbbaa085103229c03820755f20a64e581 Mon Sep 17 00:00:00 2001
From: Matt Porter <mporter@ti.com>
Date: Thu, 23 Feb 2012 09:16:04 -0500
Subject: ARM: OMAP2+: gpmc-smsc911x: add required smsc911x regulators

This fixes smsc911x support on platforms using gpmc_smsc911x_init().

Commit c7e963f6888816 (net/smsc911x: Add regulator support) added
the requirement that platforms provide vdd33a and vddvario supplies.

Signed-off-by: Matt Porter <mporter@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/gpmc-smsc911x.c | 52 +++++++++++++++++++++++++++++++++++++
 1 file changed, 52 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/gpmc-smsc911x.c b/arch/arm/mach-omap2/gpmc-smsc911x.c
index 997033129d2..bbb870c04a5 100644
--- a/arch/arm/mach-omap2/gpmc-smsc911x.c
+++ b/arch/arm/mach-omap2/gpmc-smsc911x.c
@@ -19,6 +19,8 @@
 #include <linux/interrupt.h>
 #include <linux/io.h>
 #include <linux/smsc911x.h>
+#include <linux/regulator/fixed.h>
+#include <linux/regulator/machine.h>
 
 #include <plat/board.h>
 #include <plat/gpmc.h>
@@ -42,6 +44,50 @@ static struct smsc911x_platform_config gpmc_smsc911x_config = {
 	.flags		= SMSC911X_USE_16BIT,
 };
 
+static struct regulator_consumer_supply gpmc_smsc911x_supply[] = {
+	REGULATOR_SUPPLY("vddvario", "smsc911x.0"),
+	REGULATOR_SUPPLY("vdd33a", "smsc911x.0"),
+};
+
+/* Generic regulator definition to satisfy smsc911x */
+static struct regulator_init_data gpmc_smsc911x_reg_init_data = {
+	.constraints = {
+		.min_uV			= 3300000,
+		.max_uV			= 3300000,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask		= REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies	= ARRAY_SIZE(gpmc_smsc911x_supply),
+	.consumer_supplies	= gpmc_smsc911x_supply,
+};
+
+static struct fixed_voltage_config gpmc_smsc911x_fixed_reg_data = {
+	.supply_name		= "gpmc_smsc911x",
+	.microvolts		= 3300000,
+	.gpio			= -EINVAL,
+	.startup_delay		= 0,
+	.enable_high		= 0,
+	.enabled_at_boot	= 1,
+	.init_data		= &gpmc_smsc911x_reg_init_data,
+};
+
+/*
+ * Platform device id of 42 is a temporary fix to avoid conflicts
+ * with other reg-fixed-voltage devices. The real fix should
+ * involve the driver core providing a way of dynamically
+ * assigning a unique id on registration for platform devices
+ * in the same name space.
+ */
+static struct platform_device gpmc_smsc911x_regulator = {
+	.name		= "reg-fixed-voltage",
+	.id		= 42,
+	.dev = {
+		.platform_data	= &gpmc_smsc911x_fixed_reg_data,
+	},
+};
+
 /*
  * Initialize smsc911x device connected to the GPMC. Note that we
  * assume that pin multiplexing is done in the board-*.c file,
@@ -55,6 +101,12 @@ void __init gpmc_smsc911x_init(struct omap_smsc911x_platform_data *board_data)
 
 	gpmc_cfg = board_data;
 
+	ret = platform_device_register(&gpmc_smsc911x_regulator);
+	if (ret < 0) {
+		pr_err("Unable to register smsc911x regulators: %d\n", ret);
+		return;
+	}
+
 	if (gpmc_cs_request(gpmc_cfg->cs, SZ_16M, &cs_mem_base) < 0) {
 		pr_err("Failed to request GPMC mem region\n");
 		return;
-- 
cgit v1.2.3-70-g09d2


From 655850ed7e3e90dcb5ae88ae63f75acbf5465213 Mon Sep 17 00:00:00 2001
From: Ohad Ben-Cohen <ohad@wizery.com>
Date: Thu, 23 Feb 2012 10:53:35 +0200
Subject: ARM: OMAP2: fix mailbox init code

Fix this:

arch/arm/mach-omap2/mailbox.c: In function 'omap2_mbox_probe':
arch/arm/mach-omap2/mailbox.c:354: error: 'omap2_mboxes' undeclared (first use in this function)
arch/arm/mach-omap2/mailbox.c:354: error: (Each undeclared identifier is reported only once
arch/arm/mach-omap2/mailbox.c:354: error: for each function it appears in.)

Which happens on CONFIG_ARCH_OMAP2 && !CONFIG_SOC_OMAP2420, due to
missing omap2_mboxes declaration.

In addition, make sure we declare the right mailbox instances for 2430.

Reported-by: Russell King <linux@arm.linux.org.uk>
Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
Cc: Hiroshi Doyu <hdoyu@nvidia.com>
Cc: Omar Ramirez Luna <omar.ramirez@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/mailbox.c | 10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/mailbox.c b/arch/arm/mach-omap2/mailbox.c
index 609ea2ded7e..415a6f1cf41 100644
--- a/arch/arm/mach-omap2/mailbox.c
+++ b/arch/arm/mach-omap2/mailbox.c
@@ -281,8 +281,16 @@ static struct omap_mbox mbox_iva_info = {
 	.ops	= &omap2_mbox_ops,
 	.priv	= &omap2_mbox_iva_priv,
 };
+#endif
 
-struct omap_mbox *omap2_mboxes[] = { &mbox_dsp_info, &mbox_iva_info, NULL };
+#ifdef CONFIG_ARCH_OMAP2
+struct omap_mbox *omap2_mboxes[] = {
+	&mbox_dsp_info,
+#ifdef CONFIG_SOC_OMAP2420
+	&mbox_iva_info,
+#endif
+	NULL
+};
 #endif
 
 #if defined(CONFIG_ARCH_OMAP4)
-- 
cgit v1.2.3-70-g09d2


From 1cc1c96c1658bfaf85d06d764bd7ac00640ae90f Mon Sep 17 00:00:00 2001
From: Yinghai Lu <yinghai@kernel.org>
Date: Mon, 20 Feb 2012 17:23:47 -0800
Subject: PCI: fix memleak when ACPI _CRS is not used.

warning:
unreferenced object 0xffff8801f6914200 (size 512):
  comm "swapper/0", pid 1, jiffies 4294893643 (age 2664.644s)
  hex dump (first 32 bytes):
    00 00 c0 fe 00 00 00 00 ff ff ff ff 00 00 00 00  ................
    60 58 2f f6 03 88 ff ff 00 02 00 00 00 00 00 00  `X/.............
  backtrace:
    [<ffffffff81c2408c>] kmemleak_alloc+0x26/0x43
    [<ffffffff8113764f>] __kmalloc+0x121/0x183
    [<ffffffff81ca8d93>] get_current_resources+0x5a/0xc6
    [<ffffffff81c5bedd>] pci_acpi_scan_root+0x13c/0x21c
    [<ffffffff81c2a745>] acpi_pci_root_add+0x1e1/0x421
    [<ffffffff81408f50>] acpi_device_probe+0x50/0x190
    [<ffffffff8149edc7>] really_probe+0x99/0x126
    [<ffffffff8149ef83>] driver_probe_device+0x3b/0x56
    [<ffffffff8149effd>] __driver_attach+0x5f/0x82
    [<ffffffff8149d860>] bus_for_each_dev+0x5c/0x88
    [<ffffffff8149eb87>] driver_attach+0x1e/0x20
    [<ffffffff8149e7cc>] bus_add_driver+0xca/0x21d
    [<ffffffff8149f47b>] driver_register+0x91/0xfe
    [<ffffffff81409d09>] acpi_bus_register_driver+0x43/0x45
    [<ffffffff8278bdc9>] acpi_pci_root_init+0x20/0x28
    [<ffffffff810001e7>] do_one_initcall+0x57/0x134

The system has _CRS for root buses, but they are not used because the machine
date is before the cutoff date for _CRS usage.

Try to free those unused resource arrays and names.

Reviewed-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
---
 arch/x86/pci/acpi.c | 12 +++++++-----
 1 file changed, 7 insertions(+), 5 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/pci/acpi.c b/arch/x86/pci/acpi.c
index a312e76063a..c33e0970ee9 100644
--- a/arch/x86/pci/acpi.c
+++ b/arch/x86/pci/acpi.c
@@ -282,9 +282,6 @@ static void add_resources(struct pci_root_info *info)
 	int i;
 	struct resource *res, *root, *conflict;
 
-	if (!pci_use_crs)
-		return;
-
 	coalesce_windows(info, IORESOURCE_MEM);
 	coalesce_windows(info, IORESOURCE_IO);
 
@@ -336,8 +333,13 @@ get_current_resources(struct acpi_device *device, int busnum,
 	acpi_walk_resources(device->handle, METHOD_NAME__CRS, setup_resource,
 				&info);
 
-	add_resources(&info);
-	return;
+	if (pci_use_crs) {
+		add_resources(&info);
+
+		return;
+	}
+
+	kfree(info.name);
 
 name_alloc_fail:
 	kfree(info.res);
-- 
cgit v1.2.3-70-g09d2


From ecfb68c673dc71579b53a46fa22168e7a11f2f19 Mon Sep 17 00:00:00 2001
From: Masanari Iida <standby24x7@gmail.com>
Date: Sat, 4 Feb 2012 21:40:24 +0900
Subject: sh: Fix typo in pci-sh7780.c

Correct spelling "erorr" to "error" in
arch/sh/drivers/pci/pci-sh7780.c

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/drivers/pci/pci-sh7780.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/sh/drivers/pci/pci-sh7780.c b/arch/sh/drivers/pci/pci-sh7780.c
index fa7b978cc72..fb8f1499074 100644
--- a/arch/sh/drivers/pci/pci-sh7780.c
+++ b/arch/sh/drivers/pci/pci-sh7780.c
@@ -74,7 +74,7 @@ struct pci_errors {
 	{ SH4_PCIINT_MLCK,	"master lock error" },
 	{ SH4_PCIINT_TABT,	"target-target abort" },
 	{ SH4_PCIINT_TRET,	"target retry time out" },
-	{ SH4_PCIINT_MFDE,	"master function disable erorr" },
+	{ SH4_PCIINT_MFDE,	"master function disable error" },
 	{ SH4_PCIINT_PRTY,	"address parity error" },
 	{ SH4_PCIINT_SERR,	"SERR" },
 	{ SH4_PCIINT_TWDP,	"data parity error for target write" },
-- 
cgit v1.2.3-70-g09d2


From 004f4ce9f3d50044e9542aac466e44fa3ef0258f Mon Sep 17 00:00:00 2001
From: Rusty Russell <rusty@rustcorp.com.au>
Date: Wed, 15 Feb 2012 15:28:04 +1030
Subject: arch/sh: remove references to cpu_*_map.

This has been obsolescent for a while; time for the final push.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: linux-sh@vger.kernel.org
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/kernel/smp.c      | 2 +-
 arch/sh/kernel/topology.c | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/sh/kernel/smp.c b/arch/sh/kernel/smp.c
index 3147a9a6fb8..f624174bf23 100644
--- a/arch/sh/kernel/smp.c
+++ b/arch/sh/kernel/smp.c
@@ -63,7 +63,7 @@ void __init smp_prepare_cpus(unsigned int max_cpus)
 	mp_ops->prepare_cpus(max_cpus);
 
 #ifndef CONFIG_HOTPLUG_CPU
-	init_cpu_present(&cpu_possible_map);
+	init_cpu_present(cpu_possible_mask);
 #endif
 }
 
diff --git a/arch/sh/kernel/topology.c b/arch/sh/kernel/topology.c
index 4649a6ff0cf..772caffba22 100644
--- a/arch/sh/kernel/topology.c
+++ b/arch/sh/kernel/topology.c
@@ -27,7 +27,7 @@ static cpumask_t cpu_coregroup_map(unsigned int cpu)
 	 * Presently all SH-X3 SMP cores are multi-cores, so just keep it
 	 * simple until we have a method for determining topology..
 	 */
-	return cpu_possible_map;
+	return *cpu_possible_mask;
 }
 
 const struct cpumask *cpu_coregroup_mask(unsigned int cpu)
-- 
cgit v1.2.3-70-g09d2


From befe0756d5fa5841f02e2029bbcc77225b9a13bb Mon Sep 17 00:00:00 2001
From: "Shimoda, Yoshihiro" <yoshihiro.shimoda.uh@renesas.com>
Date: Mon, 20 Feb 2012 17:26:50 +0900
Subject: sh: modify a resource of sh_eth_giga1_resources in board-sh7757lcr

The latest sh_eth driver needs a resource of TSU in the channel 1,
if the controller has TSU registers. So, this patch adds the resource.

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/boards/board-sh7757lcr.c | 5 +++++
 1 file changed, 5 insertions(+)

(limited to 'arch')

diff --git a/arch/sh/boards/board-sh7757lcr.c b/arch/sh/boards/board-sh7757lcr.c
index 8d2ae109a83..24b1ee410da 100644
--- a/arch/sh/boards/board-sh7757lcr.c
+++ b/arch/sh/boards/board-sh7757lcr.c
@@ -168,6 +168,11 @@ static struct resource sh_eth_giga1_resources[] = {
 		.start  = 0xfee00800,
 		.end    = 0xfee00fff,
 		.flags  = IORESOURCE_MEM,
+	}, {
+		/* TSU */
+		.start  = 0xfee01800,
+		.end    = 0xfee01fff,
+		.flags  = IORESOURCE_MEM,
 	}, {
 		.start  = 316,
 		.end    = 316,
-- 
cgit v1.2.3-70-g09d2


From 1ae911cba414f7e805b2cb3798fa402b36a21601 Mon Sep 17 00:00:00 2001
From: Phil Edworthy <phil.edworthy@renesas.com>
Date: Tue, 21 Feb 2012 08:29:57 +0000
Subject: sh: Fix sh2a build error for CONFIG_CACHE_WRITETHROUGH

Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/mm/cache-sh2a.c | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'arch')

diff --git a/arch/sh/mm/cache-sh2a.c b/arch/sh/mm/cache-sh2a.c
index ae08cbbfa56..949e2d3138a 100644
--- a/arch/sh/mm/cache-sh2a.c
+++ b/arch/sh/mm/cache-sh2a.c
@@ -23,6 +23,7 @@
 #define MAX_OCACHE_PAGES	32
 #define MAX_ICACHE_PAGES	32
 
+#ifdef CONFIG_CACHE_WRITEBACK
 static void sh2a_flush_oc_line(unsigned long v, int way)
 {
 	unsigned long addr = (v & 0x000007f0) | (way << 11);
@@ -34,6 +35,7 @@ static void sh2a_flush_oc_line(unsigned long v, int way)
 		__raw_writel(data, CACHE_OC_ADDRESS_ARRAY | addr);
 	}
 }
+#endif
 
 static void sh2a_invalidate_line(unsigned long cache_addr, unsigned long v)
 {
-- 
cgit v1.2.3-70-g09d2


From 689189fb014203965ed89833d8d5566424540c9d Mon Sep 17 00:00:00 2001
From: Magnus Damm <damm@opensource.se>
Date: Mon, 30 Jan 2012 11:03:49 +0900
Subject: ARM: mach-shmobile: sh73a0 PSTR 32-bit access fix

Convert the sh73a0 SMP code to use 32-bit PSTR access.

This fixes wakeup from deep sleep for sh73a0 secondary CPUs.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/arm/mach-shmobile/smp-sh73a0.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/mach-shmobile/smp-sh73a0.c b/arch/arm/mach-shmobile/smp-sh73a0.c
index 0d159d64a34..2d0d4212be4 100644
--- a/arch/arm/mach-shmobile/smp-sh73a0.c
+++ b/arch/arm/mach-shmobile/smp-sh73a0.c
@@ -80,7 +80,7 @@ int __cpuinit sh73a0_boot_secondary(unsigned int cpu)
 	/* enable cache coherency */
 	modify_scu_cpu_psr(0, 3 << (cpu * 8));
 
-	if (((__raw_readw(__io(PSTR)) >> (4 * cpu)) & 3) == 3)
+	if (((__raw_readl(__io(PSTR)) >> (4 * cpu)) & 3) == 3)
 		__raw_writel(1 << cpu, __io(WUPCR));	/* wake up */
 	else
 		__raw_writel(1 << cpu, __io(SRESCR));	/* reset */
-- 
cgit v1.2.3-70-g09d2


From 74eb436ec057e31e35addda35f9b94ee813cb633 Mon Sep 17 00:00:00 2001
From: Magnus Damm <damm@opensource.se>
Date: Mon, 30 Jan 2012 11:25:07 +0900
Subject: ARM: mach-shmobile: r8a7779 PFC IPSR4 fix

Fix the bit field width information for the IPSR4 register
in the r8a7779 pin function controller (PFC).

Without this fix the Marzen board fails to receive data
over the serial console due to misconfigured pin function
for the RX pin.

Signed-off-by: Magnus Damm <damm@opensource.se>
Tested-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/arm/mach-shmobile/pfc-r8a7779.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/mach-shmobile/pfc-r8a7779.c b/arch/arm/mach-shmobile/pfc-r8a7779.c
index 963532f2b2c..d14c9b04807 100644
--- a/arch/arm/mach-shmobile/pfc-r8a7779.c
+++ b/arch/arm/mach-shmobile/pfc-r8a7779.c
@@ -2120,7 +2120,7 @@ static struct pinmux_cfg_reg pinmux_config_regs[] = {
 	    FN_AUDATA3, 0, 0, 0 }
 	},
 	{ PINMUX_CFG_REG_VAR("IPSR4", 0xfffc0030, 32,
-			     3, 1, 1, 1, 1, 1, 1, 3, 3, 1,
+			     3, 1, 1, 1, 1, 1, 1, 3, 3,
 			     1, 1, 1, 1, 1, 1, 3, 3, 3, 2) {
 	    /* IP4_31_29 [3] */
 	    FN_DU1_DB0, FN_VI2_DATA4_VI2_B4, FN_SCL2_B, FN_SD3_DAT0,
-- 
cgit v1.2.3-70-g09d2


From 7372a4cd6c6fe07ae9d7d0340717736fba863580 Mon Sep 17 00:00:00 2001
From: Danny Kukawka <danny.kukawka@bisect.de>
Date: Thu, 16 Feb 2012 15:46:38 +0100
Subject: arch/arm/mach-shmobile/board-ag5evm.c: included linux/dma-mapping.h
 twice

arch/arm/mach-shmobile/board-ag5evm.c: included 'linux/dma-mapping.h'
twice, remove the duplicate.

Signed-off-by: Danny Kukawka <danny.kukawka@bisect.de>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/arm/mach-shmobile/board-ag5evm.c | 1 -
 1 file changed, 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/mach-shmobile/board-ag5evm.c b/arch/arm/mach-shmobile/board-ag5evm.c
index 9245f21c29d..068b754bc34 100644
--- a/arch/arm/mach-shmobile/board-ag5evm.c
+++ b/arch/arm/mach-shmobile/board-ag5evm.c
@@ -38,7 +38,6 @@
 #include <linux/mmc/sh_mobile_sdhi.h>
 #include <linux/mfd/tmio.h>
 #include <linux/sh_clk.h>
-#include <linux/dma-mapping.h>
 #include <video/sh_mobile_lcdc.h>
 #include <video/sh_mipi_dsi.h>
 #include <sound/sh_fsi.h>
-- 
cgit v1.2.3-70-g09d2


From 1d057720609ed052a6371fe1d53300e5e6328e94 Mon Sep 17 00:00:00 2001
From: David Howells <dhowells@redhat.com>
Date: Fri, 24 Feb 2012 18:01:27 +0100
Subject: [S390] KEYS: Enable the compat keyctl wrapper on s390x

Enable the compat keyctl wrapper on s390x so that 32-bit s390 userspace can
call the keyctl() syscall.

There's an s390x assembly wrapper that truncates all the register values to
32-bits and this then calls compat_sys_keyctl() - but the latter only exists if
CONFIG_KEYS_COMPAT is enabled, and the s390 Kconfig doesn't enable it.

Without this patch, 32-bit calls to the keyctl() syscall are given an ENOSYS
error:

	[root@devel4 ~]# keyctl show
	Session Keyring
	-3: key inaccessible (Function not implemented)

Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: dan@danny.cz
Cc: Carsten Otte <cotte@de.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: linux-s390@vger.kernel.org
Cc: stable@vger.kernel.org
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
---
 arch/s390/Kconfig | 3 +++
 1 file changed, 3 insertions(+)

(limited to 'arch')

diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig
index d1727584230..6d99a5fcc09 100644
--- a/arch/s390/Kconfig
+++ b/arch/s390/Kconfig
@@ -227,6 +227,9 @@ config COMPAT
 config SYSVIPC_COMPAT
 	def_bool y if COMPAT && SYSVIPC
 
+config KEYS_COMPAT
+	def_bool y if COMPAT && KEYS
+
 config AUDIT_ARCH
 	def_bool y
 
-- 
cgit v1.2.3-70-g09d2


From d60331ac0d961ae063e69c43f09d14244ad5d921 Mon Sep 17 00:00:00 2001
From: Danny Kukawka <danny.kukawka@bisect.de>
Date: Fri, 24 Feb 2012 18:01:28 +0100
Subject: [S390] crash_dump: remove duplicate include

arch/s390/kernel/crash_dump.c included 'linux/crash_dump.h' twice,
remove the duplicate.

Signed-off-by: Danny Kukawka <danny.kukawka@bisect.de>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
---
 arch/s390/kernel/crash_dump.c | 1 -
 1 file changed, 1 deletion(-)

(limited to 'arch')

diff --git a/arch/s390/kernel/crash_dump.c b/arch/s390/kernel/crash_dump.c
index 39f8fd4438f..c383ce440d9 100644
--- a/arch/s390/kernel/crash_dump.c
+++ b/arch/s390/kernel/crash_dump.c
@@ -11,7 +11,6 @@
 #include <linux/module.h>
 #include <linux/gfp.h>
 #include <linux/slab.h>
-#include <linux/crash_dump.h>
 #include <linux/bootmem.h>
 #include <linux/elf.h>
 #include <asm/ipl.h>
-- 
cgit v1.2.3-70-g09d2


From 892365ab4d29ed861709ee8611b53587ca2bb75f Mon Sep 17 00:00:00 2001
From: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Date: Fri, 24 Feb 2012 18:01:29 +0100
Subject: [S390] memory hotplug: prevent memory zone interleave

This fixes a kernel oops with CONFIG_DEBUG_VM triggered by a
VM_BUG_ON(bad_range()): kernel BUG at mm/page_alloc.c:748.

With memory hotplug on System z, it is possible that the memory
online/offline state is preserved over a system restart, e.g. there
may be offline memory blocks in ZONE_DMA or ZONE_NORMAL. So far,
the offline memory range has always been added to ZONE_MOVABLE during
system start, so that it was possible to have ZONE_MOVABLE interleave
with ZONE_DMA or ZONE_NORMAL. This patch fixes that by checking for
zone overlap before adding memory.

Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
---
 arch/s390/mm/init.c | 30 ++++++++++++++++++++++++++----
 1 file changed, 26 insertions(+), 4 deletions(-)

(limited to 'arch')

diff --git a/arch/s390/mm/init.c b/arch/s390/mm/init.c
index 5d633019d8f..50236610de8 100644
--- a/arch/s390/mm/init.c
+++ b/arch/s390/mm/init.c
@@ -223,16 +223,38 @@ void free_initrd_mem(unsigned long start, unsigned long end)
 #ifdef CONFIG_MEMORY_HOTPLUG
 int arch_add_memory(int nid, u64 start, u64 size)
 {
-	struct pglist_data *pgdat;
+	unsigned long zone_start_pfn, zone_end_pfn, nr_pages;
+	unsigned long start_pfn = PFN_DOWN(start);
+	unsigned long size_pages = PFN_DOWN(size);
 	struct zone *zone;
 	int rc;
 
-	pgdat = NODE_DATA(nid);
-	zone = pgdat->node_zones + ZONE_MOVABLE;
 	rc = vmem_add_mapping(start, size);
 	if (rc)
 		return rc;
-	rc = __add_pages(nid, zone, PFN_DOWN(start), PFN_DOWN(size));
+	for_each_zone(zone) {
+		if (zone_idx(zone) != ZONE_MOVABLE) {
+			/* Add range within existing zone limits */
+			zone_start_pfn = zone->zone_start_pfn;
+			zone_end_pfn = zone->zone_start_pfn +
+				       zone->spanned_pages;
+		} else {
+			/* Add remaining range to ZONE_MOVABLE */
+			zone_start_pfn = start_pfn;
+			zone_end_pfn = start_pfn + size_pages;
+		}
+		if (start_pfn < zone_start_pfn || start_pfn >= zone_end_pfn)
+			continue;
+		nr_pages = (start_pfn + size_pages > zone_end_pfn) ?
+			   zone_end_pfn - start_pfn : size_pages;
+		rc = __add_pages(nid, zone, start_pfn, nr_pages);
+		if (rc)
+			break;
+		start_pfn += nr_pages;
+		size_pages -= nr_pages;
+		if (!size_pages)
+			break;
+	}
 	if (rc)
 		vmem_remove_mapping(start, size);
 	return rc;
-- 
cgit v1.2.3-70-g09d2


From 120213728c6407398428a5692cfa5004b520b274 Mon Sep 17 00:00:00 2001
From: Gilles Chanteperdrix <gilles.chanteperdrix@xenomai.org>
Date: Fri, 24 Feb 2012 22:50:50 +0100
Subject: ARM: 7348/1: arm/spear600: fix one-shot timer

Currently, the "clockevent_next_event" function only works correctly
if the timer is not running when this function is called, which is
not always the case when running with CONFIG_HIGH_RES_TIMERS.

Fix this by stopping the timer at the beginning of this function.

Signed-off-by: Gilles Chanteperdrix <gilles.chanteperdrix@xenomai.org>
Acked-by: Viresh Kumar <viresh.kumar@st.com>
Acked-by: Stefan Roese <sr@denx.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/plat-spear/time.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/plat-spear/time.c b/arch/arm/plat-spear/time.c
index 0c77e429867..abb5bdecd50 100644
--- a/arch/arm/plat-spear/time.c
+++ b/arch/arm/plat-spear/time.c
@@ -145,11 +145,13 @@ static void clockevent_set_mode(enum clock_event_mode mode,
 static int clockevent_next_event(unsigned long cycles,
 				 struct clock_event_device *clk_event_dev)
 {
-	u16 val;
+	u16 val = readw(gpt_base + CR(CLKEVT));
+
+	if (val & CTRL_ENABLE)
+		writew(val & ~CTRL_ENABLE, gpt_base + CR(CLKEVT));
 
 	writew(cycles, gpt_base + LOAD(CLKEVT));
 
-	val = readw(gpt_base + CR(CLKEVT));
 	val |= CTRL_ENABLE | CTRL_INT_ENABLE;
 	writew(val, gpt_base + CR(CLKEVT));
 
-- 
cgit v1.2.3-70-g09d2


From efbc74ace95338484f8d732037b99c7c77098fce Mon Sep 17 00:00:00 2001
From: Will Deacon <will.deacon@arm.com>
Date: Fri, 24 Feb 2012 12:12:38 +0100
Subject: ARM: 7345/1: errata: update workaround for A9 erratum #743622

Erratum #743622 affects all r2 variants of the Cortex-A9 processor, so
ensure that the workaround is applied regardless of the revision.

Cc: <stable@vger.kernel.org>
Reported-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/Kconfig      | 2 +-
 arch/arm/mm/proc-v7.S | 4 +---
 2 files changed, 2 insertions(+), 4 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index a48aecc17ea..dfb0312f4e7 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1280,7 +1280,7 @@ config ARM_ERRATA_743622
 	depends on CPU_V7
 	help
 	  This option enables the workaround for the 743622 Cortex-A9
-	  (r2p0..r2p2) erratum. Under very rare conditions, a faulty
+	  (r2p*) erratum. Under very rare conditions, a faulty
 	  optimisation in the Cortex-A9 Store Buffer may lead to data
 	  corruption. This workaround sets a specific bit in the diagnostic
 	  register of the Cortex-A9 which disables the Store Buffer
diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S
index 0404ccbb8aa..f1c8486f750 100644
--- a/arch/arm/mm/proc-v7.S
+++ b/arch/arm/mm/proc-v7.S
@@ -230,9 +230,7 @@ __v7_setup:
 	mcreq	p15, 0, r10, c15, c0, 1		@ write diagnostic register
 #endif
 #ifdef CONFIG_ARM_ERRATA_743622
-	teq	r6, #0x20			@ present in r2p0
-	teqne	r6, #0x21			@ present in r2p1
-	teqne	r6, #0x22			@ present in r2p2
+	teq	r5, #0x00200000			@ only present in r2p*
 	mrceq	p15, 0, r10, c15, c0, 1		@ read diagnostic register
 	orreq	r10, r10, #1 << 6		@ set bit #6
 	mcreq	p15, 0, r10, c15, c0, 1		@ write diagnostic register
-- 
cgit v1.2.3-70-g09d2


From 43a6955fa8c3ac2e7c31959e8b77a1166dbd13f3 Mon Sep 17 00:00:00 2001
From: Will Deacon <will.deacon@arm.com>
Date: Fri, 24 Feb 2012 12:13:37 +0100
Subject: ARM: 7346/1: errata: fix PL310 erratum #753970 workaround selection

Commit fa0ce403 ("ARM: 7162/1: errata: tidy up Kconfig options for PL310
errata workarounds") introduced a consistent naming scheme for errata
workarounds, but forgot to update the platforms selecting workarounds
using the old names.

This patch updates ux500 and vexpress to select the appropriate PL310
errata workarounds.

Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-ux500/Kconfig    | 2 +-
 arch/arm/mach-vexpress/Kconfig | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-ux500/Kconfig b/arch/arm/mach-ux500/Kconfig
index 52af00446a6..c59e8b892d6 100644
--- a/arch/arm/mach-ux500/Kconfig
+++ b/arch/arm/mach-ux500/Kconfig
@@ -5,7 +5,7 @@ config UX500_SOC_COMMON
 	default y
 	select ARM_GIC
 	select HAS_MTU
-	select ARM_ERRATA_753970
+	select PL310_ERRATA_753970
 	select ARM_ERRATA_754322
 	select ARM_ERRATA_764369
 
diff --git a/arch/arm/mach-vexpress/Kconfig b/arch/arm/mach-vexpress/Kconfig
index 9b3d0fbaee7..88c3ba151e8 100644
--- a/arch/arm/mach-vexpress/Kconfig
+++ b/arch/arm/mach-vexpress/Kconfig
@@ -7,7 +7,7 @@ config ARCH_VEXPRESS_CA9X4
 	select ARM_GIC
 	select ARM_ERRATA_720789
 	select ARM_ERRATA_751472
-	select ARM_ERRATA_753970
+	select PL310_ERRATA_753970
 	select HAVE_SMP
 	select MIGHT_HAVE_CACHE_L2X0
 
-- 
cgit v1.2.3-70-g09d2


From 435792d93410f008120c4dbab148019a3cc31dbc Mon Sep 17 00:00:00 2001
From: Ohad Ben-Cohen <ohad@wizery.com>
Date: Sun, 26 Feb 2012 12:14:14 +0200
Subject: ARM: OMAP: make iommu subsys_initcall to fix builtin omap3isp

omap3isp depends on omap's iommu and will fail to probe if
initialized before it (which always happen if they are builtin).

Make omap's iommu subsys_initcall as an interim solution until
the probe deferral mechanism is merged.

Reported-by: James <angweiyang@gmail.com>
Debugged-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
Cc: stable <stable@vger.kernel.org>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Hiroshi Doyu <hdoyu@nvidia.com>
Cc: Joerg Roedel <Joerg.Roedel@amd.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
---
 arch/arm/mach-omap2/mailbox.c | 3 ++-
 drivers/iommu/omap-iommu.c    | 3 ++-
 2 files changed, 4 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/mailbox.c b/arch/arm/mach-omap2/mailbox.c
index 609ea2ded7e..a6db1e4f7b6 100644
--- a/arch/arm/mach-omap2/mailbox.c
+++ b/arch/arm/mach-omap2/mailbox.c
@@ -412,7 +412,8 @@ static void __exit omap2_mbox_exit(void)
 	platform_driver_unregister(&omap2_mbox_driver);
 }
 
-module_init(omap2_mbox_init);
+/* must be ready before omap3isp is probed */
+subsys_initcall(omap2_mbox_init);
 module_exit(omap2_mbox_exit);
 
 MODULE_LICENSE("GPL v2");
diff --git a/drivers/iommu/omap-iommu.c b/drivers/iommu/omap-iommu.c
index d8edd979d01..6899dcd02df 100644
--- a/drivers/iommu/omap-iommu.c
+++ b/drivers/iommu/omap-iommu.c
@@ -1223,7 +1223,8 @@ static int __init omap_iommu_init(void)
 
 	return platform_driver_register(&omap_iommu_driver);
 }
-module_init(omap_iommu_init);
+/* must be ready before omap3isp is probed */
+subsys_initcall(omap_iommu_init);
 
 static void __exit omap_iommu_exit(void)
 {
-- 
cgit v1.2.3-70-g09d2


From 048cd4e51d24ebf7f3552226d03c769d6ad91658 Mon Sep 17 00:00:00 2001
From: Heiko Carstens <heiko.carstens@de.ibm.com>
Date: Mon, 27 Feb 2012 10:01:52 +0100
Subject: compat: fix compile breakage on s390

The new is_compat_task() define for the !COMPAT case in
include/linux/compat.h conflicts with a similar define in
arch/s390/include/asm/compat.h.

This is the minimal patch which fixes the build issues.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/s390/include/asm/compat.h  | 7 -------
 arch/s390/kernel/process.c      | 1 -
 arch/s390/kernel/ptrace.c       | 2 +-
 arch/s390/kernel/setup.c        | 2 +-
 arch/s390/kernel/signal.c       | 1 -
 arch/s390/mm/fault.c            | 1 -
 arch/s390/mm/mmap.c             | 2 +-
 drivers/s390/block/dasd_eckd.c  | 2 +-
 drivers/s390/block/dasd_ioctl.c | 1 +
 drivers/s390/char/fs3270.c      | 1 +
 drivers/s390/char/vmcp.c        | 1 +
 drivers/s390/cio/chsc_sch.c     | 1 +
 drivers/s390/scsi/zfcp_cfdc.c   | 1 +
 13 files changed, 9 insertions(+), 14 deletions(-)

(limited to 'arch')

diff --git a/arch/s390/include/asm/compat.h b/arch/s390/include/asm/compat.h
index 2e49748b27d..234f1d859ce 100644
--- a/arch/s390/include/asm/compat.h
+++ b/arch/s390/include/asm/compat.h
@@ -172,13 +172,6 @@ static inline int is_compat_task(void)
 	return is_32bit_task();
 }
 
-#else
-
-static inline int is_compat_task(void)
-{
-	return 0;
-}
-
 #endif
 
 static inline void __user *arch_compat_alloc_user_space(long len)
diff --git a/arch/s390/kernel/process.c b/arch/s390/kernel/process.c
index 4261aa79977..e795933eb2c 100644
--- a/arch/s390/kernel/process.c
+++ b/arch/s390/kernel/process.c
@@ -29,7 +29,6 @@
 #include <asm/irq.h>
 #include <asm/timer.h>
 #include <asm/nmi.h>
-#include <asm/compat.h>
 #include <asm/smp.h>
 #include "entry.h"
 
diff --git a/arch/s390/kernel/ptrace.c b/arch/s390/kernel/ptrace.c
index 9d82ed4bcb2..61f95489d70 100644
--- a/arch/s390/kernel/ptrace.c
+++ b/arch/s390/kernel/ptrace.c
@@ -20,8 +20,8 @@
 #include <linux/regset.h>
 #include <linux/tracehook.h>
 #include <linux/seccomp.h>
+#include <linux/compat.h>
 #include <trace/syscall.h>
-#include <asm/compat.h>
 #include <asm/segment.h>
 #include <asm/page.h>
 #include <asm/pgtable.h>
diff --git a/arch/s390/kernel/setup.c b/arch/s390/kernel/setup.c
index 354de0763ef..3b2efc81f34 100644
--- a/arch/s390/kernel/setup.c
+++ b/arch/s390/kernel/setup.c
@@ -46,6 +46,7 @@
 #include <linux/kexec.h>
 #include <linux/crash_dump.h>
 #include <linux/memory.h>
+#include <linux/compat.h>
 
 #include <asm/ipl.h>
 #include <asm/uaccess.h>
@@ -59,7 +60,6 @@
 #include <asm/ptrace.h>
 #include <asm/sections.h>
 #include <asm/ebcdic.h>
-#include <asm/compat.h>
 #include <asm/kvm_virtio.h>
 #include <asm/diag.h>
 
diff --git a/arch/s390/kernel/signal.c b/arch/s390/kernel/signal.c
index a8ba840294f..2d421d90fad 100644
--- a/arch/s390/kernel/signal.c
+++ b/arch/s390/kernel/signal.c
@@ -30,7 +30,6 @@
 #include <asm/ucontext.h>
 #include <asm/uaccess.h>
 #include <asm/lowcore.h>
-#include <asm/compat.h>
 #include "entry.h"
 
 #define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP)))
diff --git a/arch/s390/mm/fault.c b/arch/s390/mm/fault.c
index 354dd39073e..e8fcd928dc7 100644
--- a/arch/s390/mm/fault.c
+++ b/arch/s390/mm/fault.c
@@ -36,7 +36,6 @@
 #include <asm/pgtable.h>
 #include <asm/irq.h>
 #include <asm/mmu_context.h>
-#include <asm/compat.h>
 #include "../kernel/entry.h"
 
 #ifndef CONFIG_64BIT
diff --git a/arch/s390/mm/mmap.c b/arch/s390/mm/mmap.c
index f09c74881b7..a0155c02e32 100644
--- a/arch/s390/mm/mmap.c
+++ b/arch/s390/mm/mmap.c
@@ -29,8 +29,8 @@
 #include <linux/mman.h>
 #include <linux/module.h>
 #include <linux/random.h>
+#include <linux/compat.h>
 #include <asm/pgalloc.h>
-#include <asm/compat.h>
 
 static unsigned long stack_maxrandom_size(void)
 {
diff --git a/drivers/s390/block/dasd_eckd.c b/drivers/s390/block/dasd_eckd.c
index 70880be2601..2617b1ed470 100644
--- a/drivers/s390/block/dasd_eckd.c
+++ b/drivers/s390/block/dasd_eckd.c
@@ -18,12 +18,12 @@
 #include <linux/hdreg.h>	/* HDIO_GETGEO			    */
 #include <linux/bio.h>
 #include <linux/module.h>
+#include <linux/compat.h>
 #include <linux/init.h>
 
 #include <asm/debug.h>
 #include <asm/idals.h>
 #include <asm/ebcdic.h>
-#include <asm/compat.h>
 #include <asm/io.h>
 #include <asm/uaccess.h>
 #include <asm/cio.h>
diff --git a/drivers/s390/block/dasd_ioctl.c b/drivers/s390/block/dasd_ioctl.c
index f1a2016829f..792c69e78fe 100644
--- a/drivers/s390/block/dasd_ioctl.c
+++ b/drivers/s390/block/dasd_ioctl.c
@@ -13,6 +13,7 @@
 #define KMSG_COMPONENT "dasd"
 
 #include <linux/interrupt.h>
+#include <linux/compat.h>
 #include <linux/major.h>
 #include <linux/fs.h>
 #include <linux/blkpg.h>
diff --git a/drivers/s390/char/fs3270.c b/drivers/s390/char/fs3270.c
index e71298158f9..911704571b9 100644
--- a/drivers/s390/char/fs3270.c
+++ b/drivers/s390/char/fs3270.c
@@ -11,6 +11,7 @@
 #include <linux/console.h>
 #include <linux/init.h>
 #include <linux/interrupt.h>
+#include <linux/compat.h>
 #include <linux/module.h>
 #include <linux/list.h>
 #include <linux/slab.h>
diff --git a/drivers/s390/char/vmcp.c b/drivers/s390/char/vmcp.c
index 75bde6a8b7d..89c03e6b1c0 100644
--- a/drivers/s390/char/vmcp.c
+++ b/drivers/s390/char/vmcp.c
@@ -13,6 +13,7 @@
 
 #include <linux/fs.h>
 #include <linux/init.h>
+#include <linux/compat.h>
 #include <linux/kernel.h>
 #include <linux/miscdevice.h>
 #include <linux/slab.h>
diff --git a/drivers/s390/cio/chsc_sch.c b/drivers/s390/cio/chsc_sch.c
index 0c87b0fc771..8f9a1a38449 100644
--- a/drivers/s390/cio/chsc_sch.c
+++ b/drivers/s390/cio/chsc_sch.c
@@ -8,6 +8,7 @@
  */
 
 #include <linux/slab.h>
+#include <linux/compat.h>
 #include <linux/device.h>
 #include <linux/module.h>
 #include <linux/uaccess.h>
diff --git a/drivers/s390/scsi/zfcp_cfdc.c b/drivers/s390/scsi/zfcp_cfdc.c
index 303dde09d29..fab2c2592a9 100644
--- a/drivers/s390/scsi/zfcp_cfdc.c
+++ b/drivers/s390/scsi/zfcp_cfdc.c
@@ -11,6 +11,7 @@
 #define KMSG_COMPONENT "zfcp"
 #define pr_fmt(fmt) KMSG_COMPONENT ": " fmt
 
+#include <linux/compat.h>
 #include <linux/slab.h>
 #include <linux/types.h>
 #include <linux/miscdevice.h>
-- 
cgit v1.2.3-70-g09d2


From f6737055c1c432a9628a9a731f9881ad8e0a9eee Mon Sep 17 00:00:00 2001
From: Roland Stigge <stigge@antcom.de>
Date: Mon, 27 Feb 2012 17:28:02 +0100
Subject: ARM: LPC32xx: Fix irq on GPI_28

The GPI_28 IRQ was not registered properly. The registration of
IRQ_LPC32XX_GPI_28 was added and the (wrong) IRQ_LPC32XX_GPI_11 at
LPC32XX_SIC1_IRQ(4) was replaced by IRQ_LPC32XX_GPI_28 (see manual of
LPC32xx / interrupt controller).

Signed-off-by: Roland Stigge <stigge@antcom.de>
Cc: stable@vger.kernel.org
---
 arch/arm/mach-lpc32xx/include/mach/irqs.h | 2 +-
 arch/arm/mach-lpc32xx/irq.c               | 4 ++++
 2 files changed, 5 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/mach-lpc32xx/include/mach/irqs.h b/arch/arm/mach-lpc32xx/include/mach/irqs.h
index 2667f52e3b0..9e3b90df32e 100644
--- a/arch/arm/mach-lpc32xx/include/mach/irqs.h
+++ b/arch/arm/mach-lpc32xx/include/mach/irqs.h
@@ -61,7 +61,7 @@
  */
 #define IRQ_LPC32XX_JTAG_COMM_TX	LPC32XX_SIC1_IRQ(1)
 #define IRQ_LPC32XX_JTAG_COMM_RX	LPC32XX_SIC1_IRQ(2)
-#define IRQ_LPC32XX_GPI_11		LPC32XX_SIC1_IRQ(4)
+#define IRQ_LPC32XX_GPI_28		LPC32XX_SIC1_IRQ(4)
 #define IRQ_LPC32XX_TS_P		LPC32XX_SIC1_IRQ(6)
 #define IRQ_LPC32XX_TS_IRQ		LPC32XX_SIC1_IRQ(7)
 #define IRQ_LPC32XX_TS_AUX		LPC32XX_SIC1_IRQ(8)
diff --git a/arch/arm/mach-lpc32xx/irq.c b/arch/arm/mach-lpc32xx/irq.c
index 4eae566dfdc..ce4b5570bd6 100644
--- a/arch/arm/mach-lpc32xx/irq.c
+++ b/arch/arm/mach-lpc32xx/irq.c
@@ -118,6 +118,10 @@ static const struct lpc32xx_event_info lpc32xx_events[NR_IRQS] = {
 		.event_group = &lpc32xx_event_pin_regs,
 		.mask = LPC32XX_CLKPWR_EXTSRC_GPI_06_BIT,
 	},
+	[IRQ_LPC32XX_GPI_28] = {
+		.event_group = &lpc32xx_event_pin_regs,
+		.mask = LPC32XX_CLKPWR_EXTSRC_GPI_28_BIT,
+	},
 	[IRQ_LPC32XX_GPIO_00] = {
 		.event_group = &lpc32xx_event_int_regs,
 		.mask = LPC32XX_CLKPWR_INTSRC_GPIO_00_BIT,
-- 
cgit v1.2.3-70-g09d2


From 35dd0a75d4a382e7f769dd0277732e7aa5235718 Mon Sep 17 00:00:00 2001
From: Roland Stigge <stigge@antcom.de>
Date: Mon, 27 Feb 2012 17:28:02 +0100
Subject: ARM: LPC32xx: Fix interrupt controller init

This patch fixes the initialization of the interrupt controller of the LPC32xx
by correctly setting up SIC1 and SIC2 instead of (wrongly) using the same value
as for the Main Interrupt Controller (MIC).

Signed-off-by: Roland Stigge <stigge@antcom.de>
Cc: stable@vger.kernel.org
---
 arch/arm/mach-lpc32xx/irq.c | 10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-lpc32xx/irq.c b/arch/arm/mach-lpc32xx/irq.c
index ce4b5570bd6..d3bf9c11fd6 100644
--- a/arch/arm/mach-lpc32xx/irq.c
+++ b/arch/arm/mach-lpc32xx/irq.c
@@ -384,13 +384,15 @@ void __init lpc32xx_init_irq(void)
 
 	/* Setup SIC1 */
 	__raw_writel(0, LPC32XX_INTC_MASK(LPC32XX_SIC1_BASE));
-	__raw_writel(MIC_APR_DEFAULT, LPC32XX_INTC_POLAR(LPC32XX_SIC1_BASE));
-	__raw_writel(MIC_ATR_DEFAULT, LPC32XX_INTC_ACT_TYPE(LPC32XX_SIC1_BASE));
+	__raw_writel(SIC1_APR_DEFAULT, LPC32XX_INTC_POLAR(LPC32XX_SIC1_BASE));
+	__raw_writel(SIC1_ATR_DEFAULT,
+				LPC32XX_INTC_ACT_TYPE(LPC32XX_SIC1_BASE));
 
 	/* Setup SIC2 */
 	__raw_writel(0, LPC32XX_INTC_MASK(LPC32XX_SIC2_BASE));
-	__raw_writel(MIC_APR_DEFAULT, LPC32XX_INTC_POLAR(LPC32XX_SIC2_BASE));
-	__raw_writel(MIC_ATR_DEFAULT, LPC32XX_INTC_ACT_TYPE(LPC32XX_SIC2_BASE));
+	__raw_writel(SIC2_APR_DEFAULT, LPC32XX_INTC_POLAR(LPC32XX_SIC2_BASE));
+	__raw_writel(SIC2_ATR_DEFAULT,
+				LPC32XX_INTC_ACT_TYPE(LPC32XX_SIC2_BASE));
 
 	/* Configure supported IRQ's */
 	for (i = 0; i < NR_IRQS; i++) {
-- 
cgit v1.2.3-70-g09d2


From 94ed7830cba4dce57b18a2926b5d826bfd184bd6 Mon Sep 17 00:00:00 2001
From: Roland Stigge <stigge@antcom.de>
Date: Mon, 27 Feb 2012 17:28:02 +0100
Subject: ARM: LPC32xx: irq.c: Clear latched event

This patch fixes the wakeup disable function by clearing latched events.

Signed-off-by: Roland Stigge <stigge@antcom.de>
Cc: stable@vger.kernel.org
---
 arch/arm/mach-lpc32xx/irq.c | 11 ++++++++++-
 1 file changed, 10 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/mach-lpc32xx/irq.c b/arch/arm/mach-lpc32xx/irq.c
index d3bf9c11fd6..c74de01ab5b 100644
--- a/arch/arm/mach-lpc32xx/irq.c
+++ b/arch/arm/mach-lpc32xx/irq.c
@@ -309,9 +309,18 @@ static int lpc32xx_irq_wake(struct irq_data *d, unsigned int state)
 
 		if (state)
 			eventreg |= lpc32xx_events[d->irq].mask;
-		else
+		else {
 			eventreg &= ~lpc32xx_events[d->irq].mask;
 
+			/*
+			 * When disabling the wakeup, clear the latched
+			 * event
+			 */
+			__raw_writel(lpc32xx_events[d->irq].mask,
+				lpc32xx_events[d->irq].
+				event_group->rawstat_reg);
+		}
+
 		__raw_writel(eventreg,
 			lpc32xx_events[d->irq].event_group->enab_reg);
 
-- 
cgit v1.2.3-70-g09d2


From 2707208ee8a80dbbd5426f5aa1a934f766825bb5 Mon Sep 17 00:00:00 2001
From: Roland Stigge <stigge@antcom.de>
Date: Mon, 27 Feb 2012 17:28:02 +0100
Subject: ARM: LPC32xx: serial.c: HW bug workaround

This patch fixes a HW bug by flushing RX FIFOs of the UARTs on init. It was
ported from NXP's git.lpclinux.com tree.

Signed-off-by: Roland Stigge <stigge@antcom.de>
Cc: stable@vger.kernel.org
---
 arch/arm/mach-lpc32xx/serial.c | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-lpc32xx/serial.c b/arch/arm/mach-lpc32xx/serial.c
index 429cfdbb2b3..1a3fd4ce046 100644
--- a/arch/arm/mach-lpc32xx/serial.c
+++ b/arch/arm/mach-lpc32xx/serial.c
@@ -88,6 +88,7 @@ struct uartinit {
 	char *uart_ck_name;
 	u32 ck_mode_mask;
 	void __iomem *pdiv_clk_reg;
+	resource_size_t mapbase;
 };
 
 static struct uartinit uartinit_data[] __initdata = {
@@ -97,6 +98,7 @@ static struct uartinit uartinit_data[] __initdata = {
 		.ck_mode_mask =
 			LPC32XX_UART_CLKMODE_LOAD(LPC32XX_UART_CLKMODE_ON, 5),
 		.pdiv_clk_reg = LPC32XX_CLKPWR_UART5_CLK_CTRL,
+		.mapbase = LPC32XX_UART5_BASE,
 	},
 #endif
 #ifdef CONFIG_ARCH_LPC32XX_UART3_SELECT
@@ -105,6 +107,7 @@ static struct uartinit uartinit_data[] __initdata = {
 		.ck_mode_mask =
 			LPC32XX_UART_CLKMODE_LOAD(LPC32XX_UART_CLKMODE_ON, 3),
 		.pdiv_clk_reg = LPC32XX_CLKPWR_UART3_CLK_CTRL,
+		.mapbase = LPC32XX_UART3_BASE,
 	},
 #endif
 #ifdef CONFIG_ARCH_LPC32XX_UART4_SELECT
@@ -113,6 +116,7 @@ static struct uartinit uartinit_data[] __initdata = {
 		.ck_mode_mask =
 			LPC32XX_UART_CLKMODE_LOAD(LPC32XX_UART_CLKMODE_ON, 4),
 		.pdiv_clk_reg = LPC32XX_CLKPWR_UART4_CLK_CTRL,
+		.mapbase = LPC32XX_UART4_BASE,
 	},
 #endif
 #ifdef CONFIG_ARCH_LPC32XX_UART6_SELECT
@@ -121,6 +125,7 @@ static struct uartinit uartinit_data[] __initdata = {
 		.ck_mode_mask =
 			LPC32XX_UART_CLKMODE_LOAD(LPC32XX_UART_CLKMODE_ON, 6),
 		.pdiv_clk_reg = LPC32XX_CLKPWR_UART6_CLK_CTRL,
+		.mapbase = LPC32XX_UART6_BASE,
 	},
 #endif
 };
@@ -165,6 +170,19 @@ void __init lpc32xx_serial_init(void)
 
 		/* pre-UART clock divider set to 1 */
 		__raw_writel(0x0101, uartinit_data[i].pdiv_clk_reg);
+
+		/*
+		 * Force a flush of the RX FIFOs to work around a
+		 * HW bug
+		 */
+		puart = uartinit_data[i].mapbase;
+		__raw_writel(0xC1, LPC32XX_UART_IIR_FCR(puart));
+		__raw_writel(0x00, LPC32XX_UART_DLL_FIFO(puart));
+		j = LPC32XX_SUART_FIFO_SIZE;
+		while (j--)
+			tmp = __raw_readl(
+				LPC32XX_UART_DLL_FIFO(puart));
+		__raw_writel(0, LPC32XX_UART_IIR_FCR(puart));
 	}
 
 	/* This needs to be done after all UART clocks are setup */
-- 
cgit v1.2.3-70-g09d2


From ff424aa4c89d19082e8ae5a3351006bc8a4cd91b Mon Sep 17 00:00:00 2001
From: Roland Stigge <stigge@antcom.de>
Date: Mon, 27 Feb 2012 17:28:03 +0100
Subject: ARM: LPC32xx: serial.c: Fixed loop limit

This patch fixes a wrong loop limit on UART init.

Signed-off-by: Roland Stigge <stigge@antcom.de>
Cc: stable@vger.kernel.org
---
 arch/arm/mach-lpc32xx/serial.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/mach-lpc32xx/serial.c b/arch/arm/mach-lpc32xx/serial.c
index 1a3fd4ce046..f2735281616 100644
--- a/arch/arm/mach-lpc32xx/serial.c
+++ b/arch/arm/mach-lpc32xx/serial.c
@@ -187,7 +187,7 @@ void __init lpc32xx_serial_init(void)
 
 	/* This needs to be done after all UART clocks are setup */
 	__raw_writel(clkmodes, LPC32XX_UARTCTL_CLKMODE);
-	for (i = 0; i < ARRAY_SIZE(uartinit_data) - 1; i++) {
+	for (i = 0; i < ARRAY_SIZE(uartinit_data); i++) {
 		/* Force a flush of the RX FIFOs to work around a HW bug */
 		puart = serial_std_platform_data[i].mapbase;
 		__raw_writel(0xC1, LPC32XX_UART_IIR_FCR(puart));
-- 
cgit v1.2.3-70-g09d2


From aabb70dc23799e09d69d528756471d854f993136 Mon Sep 17 00:00:00 2001
From: James Bottomley <jbottomley@parallels.com>
Date: Mon, 27 Feb 2012 21:41:05 +0000
Subject: [PARISC] don't unconditionally override CROSS_COMPILE for 64 bit.

The user may wish to set their own value (for real cross compiles).  Since the
top level Makefile initialises CROSS_COMPILE to empty by default, we must
check it for being empty (rather than for being defined) before we override.

Reported-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
---
 arch/parisc/Makefile | 4 ++++
 1 file changed, 4 insertions(+)

(limited to 'arch')

diff --git a/arch/parisc/Makefile b/arch/parisc/Makefile
index 55cca1dac43..19ab7b2ea1c 100644
--- a/arch/parisc/Makefile
+++ b/arch/parisc/Makefile
@@ -31,7 +31,11 @@ ifdef CONFIG_64BIT
 UTS_MACHINE	:= parisc64
 CHECKFLAGS	+= -D__LP64__=1 -m64
 WIDTH		:= 64
+
+# FIXME: if no default set, should really try to locate dynamically
+ifeq ($(CROSS_COMPILE),)
 CROSS_COMPILE	:= hppa64-linux-gnu-
+endif
 else # 32-bit
 WIDTH		:=
 endif
-- 
cgit v1.2.3-70-g09d2


From 8411371709610c826bf65684f886bfdfb5780ca1 Mon Sep 17 00:00:00 2001
From: Jonathan Nieder <jrnieder@gmail.com>
Date: Tue, 28 Feb 2012 11:51:10 -0700
Subject: x86/PCI: use host bridge _CRS info on MSI MS-7253

In the spirit of commit 29cf7a30f8a0 ("x86/PCI: use host bridge _CRS
info on ASUS M2V-MX SE"), this DMI quirk turns on "pci_use_crs" by
default on a board that needs it.

This fixes boot failures and oopses introduced in 3e3da00c01d0
("x86/pci: AMD one chain system to use pci read out res").  The quirk
is quite targetted (to a specific board and BIOS version) for two
reasons:

 (1) to emphasize that this method of tackling the problem one quirk
     at a time is a little insane

 (2) to give BIOS vendors an opportunity to use simpler tables and
     allow us to return to generic behavior (whatever that happens to
     be) with a later BIOS update

In other words, I am not at all happy with having quirks like this.
But it is even worse for the kernel not to work out of the box on
these machines, so...

Reference: https://bugzilla.kernel.org/show_bug.cgi?id=42619
Reported-by: Svante Signell <svante.signell@telia.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
---
 arch/x86/pci/acpi.c | 11 +++++++++++
 1 file changed, 11 insertions(+)

(limited to 'arch')

diff --git a/arch/x86/pci/acpi.c b/arch/x86/pci/acpi.c
index c33e0970ee9..7034c081b22 100644
--- a/arch/x86/pci/acpi.c
+++ b/arch/x86/pci/acpi.c
@@ -60,6 +60,17 @@ static const struct dmi_system_id pci_use_crs_table[] __initconst = {
 			DMI_MATCH(DMI_BIOS_VENDOR, "American Megatrends Inc."),
 		},
 	},
+	/* https://bugzilla.kernel.org/show_bug.cgi?id=42619 */
+	{
+		.callback = set_use_crs,
+		.ident = "MSI MS-7253",
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "MICRO-STAR INTERNATIONAL CO., LTD"),
+			DMI_MATCH(DMI_BOARD_NAME, "MS-7253"),
+			DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix Technologies, LTD"),
+			DMI_MATCH(DMI_BIOS_VERSION, "V1.6"),
+		},
+	},
 
 	/* Now for the blacklist.. */
 
-- 
cgit v1.2.3-70-g09d2


From 5a3ff8473c9100adb06d60e52477668d1504e8cf Mon Sep 17 00:00:00 2001
From: "Cousson, Benoit" <b-cousson@ti.com>
Date: Tue, 28 Feb 2012 14:10:09 +0100
Subject: ARM: OMAP: irqs: Fix NR_IRQS value to handle PRCM interrupts

The following commit: 2f31b51659c2d8315ea2888ba5b93076febe672b
Author: Tero Kristo <t-kristo@ti.com>
Date:   Fri Dec 16 14:37:00 2011 -0700

    ARM: OMAP4: PRM: use PRCM interrupt handler

introduced the PRCM interrupt handler and thus the need
for 64 more interrupts. Since SPARSE_IRQ is still not fully
functional on OMAP, the NR_IRQS needs to be updated to avoid
the failure that happen during irq_alloc_descs call inside
the PRCM driver:

[    0.208221] PRCM: failed to allocate irq descs: -12

Later the mux framework is then unable to request an IRQ from
the PRCM interrupt handler.

[    1.802795] mux: Failed to setup hwmod io irq -22

Fix that by adding 64 more interrupts for OMAP2PLUS config.

Signed-off-by: Benoit Cousson <b-cousson@ti.com>
Cc: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/plat-omap/include/plat/irqs.h | 10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/plat-omap/include/plat/irqs.h b/arch/arm/plat-omap/include/plat/irqs.h
index 2efd6454bce..37bbbbb981b 100644
--- a/arch/arm/plat-omap/include/plat/irqs.h
+++ b/arch/arm/plat-omap/include/plat/irqs.h
@@ -428,8 +428,16 @@
 #define OMAP_GPMC_NR_IRQS	8
 #define OMAP_GPMC_IRQ_END	(OMAP_GPMC_IRQ_BASE + OMAP_GPMC_NR_IRQS)
 
+/* PRCM IRQ handler */
+#ifdef CONFIG_ARCH_OMAP2PLUS
+#define OMAP_PRCM_IRQ_BASE	(OMAP_GPMC_IRQ_END)
+#define OMAP_PRCM_NR_IRQS	64
+#define OMAP_PRCM_IRQ_END	(OMAP_PRCM_IRQ_BASE + OMAP_PRCM_NR_IRQS)
+#else
+#define OMAP_PRCM_IRQ_END	OMAP_GPMC_IRQ_END
+#endif
 
-#define NR_IRQS			OMAP_GPMC_IRQ_END
+#define NR_IRQS			OMAP_PRCM_IRQ_END
 
 #define OMAP_IRQ_BIT(irq)	(1 << ((irq) % 32))
 
-- 
cgit v1.2.3-70-g09d2


From d867093d412c32e246570e6d07bd987b067d688d Mon Sep 17 00:00:00 2001
From: Rajendra Nayak <rnayak@ti.com>
Date: Tue, 28 Feb 2012 15:02:34 +0530
Subject: ARM: OMAP2+: Remove apply_uV constraints for fixed regulator

VUSB is a fixed regulator, so get rid of the apply_uV constraint
for it, which fixes the following error seen at boot on omap4
SDP and PANDA boards.

machine_constraints_voltage: VUSB: failed to apply 3300000uV constraint
twl_reg twl_reg.46: can't register VUSB, -22
twl_reg: probe of twl_reg.46 failed with error -22

Signed-off-by: Rajendra Nayak <rnayak@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/twl-common.c | 1 -
 1 file changed, 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/twl-common.c b/arch/arm/mach-omap2/twl-common.c
index 10b20c652e5..4b57757bf9d 100644
--- a/arch/arm/mach-omap2/twl-common.c
+++ b/arch/arm/mach-omap2/twl-common.c
@@ -270,7 +270,6 @@ static struct regulator_init_data omap4_vusb_idata = {
 	.constraints = {
 		.min_uV			= 3300000,
 		.max_uV			= 3300000,
-		.apply_uV		= true,
 		.valid_modes_mask	= REGULATOR_MODE_NORMAL
 					| REGULATOR_MODE_STANDBY,
 		.valid_ops_mask		= REGULATOR_CHANGE_MODE
-- 
cgit v1.2.3-70-g09d2


From b9eaa81af2fdc0b710c7afb7d3e425ea27133b72 Mon Sep 17 00:00:00 2001
From: Nicolas Ferre <nicolas.ferre@atmel.com>
Date: Mon, 10 Oct 2011 14:55:17 +0200
Subject: ARM: at91/dma: remove platform data from DMA controller

DMA controller can deduce its configuration data from
the platform. Remove the platform data and match device
types with the compatible ones.

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
---
 arch/arm/mach-at91/at91sam9g45_devices.c | 9 +--------
 arch/arm/mach-at91/at91sam9rl_devices.c  | 8 +-------
 2 files changed, 2 insertions(+), 15 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c
index b7582dd10dc..07708d42268 100644
--- a/arch/arm/mach-at91/at91sam9g45_devices.c
+++ b/arch/arm/mach-at91/at91sam9g45_devices.c
@@ -38,10 +38,6 @@
 #if defined(CONFIG_AT_HDMAC) || defined(CONFIG_AT_HDMAC_MODULE)
 static u64 hdmac_dmamask = DMA_BIT_MASK(32);
 
-static struct at_dma_platform_data atdma_pdata = {
-	.nr_channels	= 8,
-};
-
 static struct resource hdmac_resources[] = {
 	[0] = {
 		.start	= AT91SAM9G45_BASE_DMA,
@@ -56,12 +52,11 @@ static struct resource hdmac_resources[] = {
 };
 
 static struct platform_device at_hdmac_device = {
-	.name		= "at_hdmac",
+	.name		= "at91sam9g45_dma",
 	.id		= -1,
 	.dev		= {
 				.dma_mask		= &hdmac_dmamask,
 				.coherent_dma_mask	= DMA_BIT_MASK(32),
-				.platform_data		= &atdma_pdata,
 	},
 	.resource	= hdmac_resources,
 	.num_resources	= ARRAY_SIZE(hdmac_resources),
@@ -69,8 +64,6 @@ static struct platform_device at_hdmac_device = {
 
 void __init at91_add_device_hdmac(void)
 {
-	dma_cap_set(DMA_MEMCPY, atdma_pdata.cap_mask);
-	dma_cap_set(DMA_SLAVE, atdma_pdata.cap_mask);
 	platform_device_register(&at_hdmac_device);
 }
 #else
diff --git a/arch/arm/mach-at91/at91sam9rl_devices.c b/arch/arm/mach-at91/at91sam9rl_devices.c
index 61908dce978..9be71c11d0f 100644
--- a/arch/arm/mach-at91/at91sam9rl_devices.c
+++ b/arch/arm/mach-at91/at91sam9rl_devices.c
@@ -33,10 +33,6 @@
 #if defined(CONFIG_AT_HDMAC) || defined(CONFIG_AT_HDMAC_MODULE)
 static u64 hdmac_dmamask = DMA_BIT_MASK(32);
 
-static struct at_dma_platform_data atdma_pdata = {
-	.nr_channels	= 2,
-};
-
 static struct resource hdmac_resources[] = {
 	[0] = {
 		.start	= AT91SAM9RL_BASE_DMA,
@@ -51,12 +47,11 @@ static struct resource hdmac_resources[] = {
 };
 
 static struct platform_device at_hdmac_device = {
-	.name		= "at_hdmac",
+	.name		= "at91sam9rl_dma",
 	.id		= -1,
 	.dev		= {
 				.dma_mask		= &hdmac_dmamask,
 				.coherent_dma_mask	= DMA_BIT_MASK(32),
-				.platform_data		= &atdma_pdata,
 	},
 	.resource	= hdmac_resources,
 	.num_resources	= ARRAY_SIZE(hdmac_resources),
@@ -64,7 +59,6 @@ static struct platform_device at_hdmac_device = {
 
 void __init at91_add_device_hdmac(void)
 {
-	dma_cap_set(DMA_MEMCPY, atdma_pdata.cap_mask);
 	platform_device_register(&at_hdmac_device);
 }
 #else
-- 
cgit v1.2.3-70-g09d2


From 851c52b23c5c27047f1438684750e28c44d73191 Mon Sep 17 00:00:00 2001
From: Nicolas Ferre <nicolas.ferre@atmel.com>
Date: Mon, 10 Oct 2011 16:50:43 +0200
Subject: ARM: at91/dma: DMA controller registering with DT support

Device tree support on at91sam9g45 family SoC. Only call
platform_device_register() if no dma-controller node is
found in device tree.

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
---
 arch/arm/mach-at91/at91sam9g45_devices.c | 10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c
index 07708d42268..96e2adcd5a8 100644
--- a/arch/arm/mach-at91/at91sam9g45_devices.c
+++ b/arch/arm/mach-at91/at91sam9g45_devices.c
@@ -64,7 +64,15 @@ static struct platform_device at_hdmac_device = {
 
 void __init at91_add_device_hdmac(void)
 {
-	platform_device_register(&at_hdmac_device);
+#if defined(CONFIG_OF)
+	struct device_node *of_node =
+		of_find_node_by_name(NULL, "dma-controller");
+
+	if (of_node)
+		of_node_put(of_node);
+	else
+#endif
+		platform_device_register(&at_hdmac_device);
 }
 #else
 void __init at91_add_device_hdmac(void) {}
-- 
cgit v1.2.3-70-g09d2


From c2d1355476b555b54c26d20962211fcf06b8c55f Mon Sep 17 00:00:00 2001
From: Vaibhav Hiremath <hvaibhav@ti.com>
Date: Mon, 23 Jan 2012 13:26:47 +0530
Subject: ARM: OMAP: id: Add missing break statement in omap3xxx_check_revision

Add missing break statement in the function omap3xxx_check_revision.

The commit id 4390f5b2cb1f56 [ARM: OMAP: TI814X: Add cpu type macros
and detection support], removed the 'break' statement from the function
omap3xxx_check_revision(), resulting into wrong omap/cpu_revision
initialization for AM335x devices.

Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com>
[tony@atomide.com: refreshed to apply after changes to cpu_rev]
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/id.c | 1 +
 1 file changed, 1 insertion(+)

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c
index 6c5826605ea..719ee423abe 100644
--- a/arch/arm/mach-omap2/id.c
+++ b/arch/arm/mach-omap2/id.c
@@ -343,6 +343,7 @@ static void __init omap3_check_revision(const char **cpu_rev)
 	case 0xb944:
 		omap_revision = AM335X_REV_ES1_0;
 		*cpu_rev = "1.0";
+		break;
 	case 0xb8f2:
 		switch (rev) {
 		case 0:
-- 
cgit v1.2.3-70-g09d2


From c65d8ef2e7158ba521e9cb1ce10ff468b8ddcb6a Mon Sep 17 00:00:00 2001
From: Joonyoung Shim <jy0922.shim@samsung.com>
Date: Thu, 1 Mar 2012 13:19:21 +0900
Subject: ARM: SAMSUNG: Fix memory size for hsotg

The device link core registers for hsotg is base + 0000h
~ base + 11000h.

Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
[Rebased on the newest git/kgene/linux-samsung #for-next]
Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
 arch/arm/plat-samsung/devs.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/plat-samsung/devs.c b/arch/arm/plat-samsung/devs.c
index f10768e988d..d21d744e4d9 100644
--- a/arch/arm/plat-samsung/devs.c
+++ b/arch/arm/plat-samsung/devs.c
@@ -1409,7 +1409,7 @@ void __init s5p_ehci_set_platdata(struct s5p_ehci_platdata *pd)
 
 #ifdef CONFIG_S3C_DEV_USB_HSOTG
 static struct resource s3c_usb_hsotg_resources[] = {
-	[0] = DEFINE_RES_MEM(S3C_PA_USB_HSOTG, SZ_16K),
+	[0] = DEFINE_RES_MEM(S3C_PA_USB_HSOTG, SZ_128K),
 	[1] = DEFINE_RES_IRQ(IRQ_OTG),
 };
 
-- 
cgit v1.2.3-70-g09d2


From c1ba544f81544ed9613ad5d058968533dbcef4b2 Mon Sep 17 00:00:00 2001
From: Heiko Stuebner <heiko@sntech.de>
Date: Thu, 1 Mar 2012 13:23:32 +0900
Subject: ARM: S3C24XX: Fix restart on S3C2442

Commit b27b072791dc (ARM: 7265/1: restart: S3C24XX: use new restart hook)
introduced the new restart hook also for the S3C244x cpus, but it
was only defined in the S3C2440 scope, i.e. when CPU_S3C2440 was
selected. Devices using the S3C2442 like the GTA02 normally don't select
this CPU which leads to compilation errors like:
    LD      .tmp_vmlinux1
  arch/arm/mach-s3c2440/built-in.o:(.arch.info.init+0x3c): undefined reference
to `s3c2440_restart'
  make: *** [.tmp_vmlinux1] Error 1

Therefore move the s3c2440_restart function to s3c244x.c which is
common to both cpus and also fix the naming to reflect this.

Reported-and-tested-by: Denis 'GNUtoo' Carikli <GNUtoo@no-log.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
 arch/arm/mach-s3c2440/common.h         |  2 +-
 arch/arm/mach-s3c2440/mach-anubis.c    |  2 +-
 arch/arm/mach-s3c2440/mach-at2440evb.c |  2 +-
 arch/arm/mach-s3c2440/mach-gta02.c     |  2 +-
 arch/arm/mach-s3c2440/mach-mini2440.c  |  2 +-
 arch/arm/mach-s3c2440/mach-nexcoder.c  |  2 +-
 arch/arm/mach-s3c2440/mach-osiris.c    |  2 +-
 arch/arm/mach-s3c2440/mach-rx1950.c    |  2 +-
 arch/arm/mach-s3c2440/mach-rx3715.c    |  2 +-
 arch/arm/mach-s3c2440/mach-smdk2440.c  |  2 +-
 arch/arm/mach-s3c2440/s3c2440.c        | 13 -------------
 arch/arm/mach-s3c2440/s3c244x.c        | 11 +++++++++++
 12 files changed, 21 insertions(+), 23 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-s3c2440/common.h b/arch/arm/mach-s3c2440/common.h
index db8a98ac68c..0c1eb1dfc53 100644
--- a/arch/arm/mach-s3c2440/common.h
+++ b/arch/arm/mach-s3c2440/common.h
@@ -12,6 +12,6 @@
 #ifndef __ARCH_ARM_MACH_S3C2440_COMMON_H
 #define __ARCH_ARM_MACH_S3C2440_COMMON_H
 
-void s3c2440_restart(char mode, const char *cmd);
+void s3c244x_restart(char mode, const char *cmd);
 
 #endif /* __ARCH_ARM_MACH_S3C2440_COMMON_H */
diff --git a/arch/arm/mach-s3c2440/mach-anubis.c b/arch/arm/mach-s3c2440/mach-anubis.c
index 24569550de1..19b577bc09b 100644
--- a/arch/arm/mach-s3c2440/mach-anubis.c
+++ b/arch/arm/mach-s3c2440/mach-anubis.c
@@ -487,5 +487,5 @@ MACHINE_START(ANUBIS, "Simtec-Anubis")
 	.init_machine	= anubis_init,
 	.init_irq	= s3c24xx_init_irq,
 	.timer		= &s3c24xx_timer,
-	.restart	= s3c2440_restart,
+	.restart	= s3c244x_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c2440/mach-at2440evb.c b/arch/arm/mach-s3c2440/mach-at2440evb.c
index d6a9763110c..d7ae49c9011 100644
--- a/arch/arm/mach-s3c2440/mach-at2440evb.c
+++ b/arch/arm/mach-s3c2440/mach-at2440evb.c
@@ -222,5 +222,5 @@ MACHINE_START(AT2440EVB, "AT2440EVB")
 	.init_machine	= at2440evb_init,
 	.init_irq	= s3c24xx_init_irq,
 	.timer		= &s3c24xx_timer,
-	.restart	= s3c2440_restart,
+	.restart	= s3c244x_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c2440/mach-gta02.c b/arch/arm/mach-s3c2440/mach-gta02.c
index 5859e609d28..9a4a5bc008e 100644
--- a/arch/arm/mach-s3c2440/mach-gta02.c
+++ b/arch/arm/mach-s3c2440/mach-gta02.c
@@ -601,5 +601,5 @@ MACHINE_START(NEO1973_GTA02, "GTA02")
 	.init_irq	= s3c24xx_init_irq,
 	.init_machine	= gta02_machine_init,
 	.timer		= &s3c24xx_timer,
-	.restart	= s3c2440_restart,
+	.restart	= s3c244x_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c2440/mach-mini2440.c b/arch/arm/mach-s3c2440/mach-mini2440.c
index adbbb85bc4c..5d66fb218a4 100644
--- a/arch/arm/mach-s3c2440/mach-mini2440.c
+++ b/arch/arm/mach-s3c2440/mach-mini2440.c
@@ -701,5 +701,5 @@ MACHINE_START(MINI2440, "MINI2440")
 	.init_machine	= mini2440_init,
 	.init_irq	= s3c24xx_init_irq,
 	.timer		= &s3c24xx_timer,
-	.restart	= s3c2440_restart,
+	.restart	= s3c244x_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c2440/mach-nexcoder.c b/arch/arm/mach-s3c2440/mach-nexcoder.c
index 40eaf844bc1..5198e3e1c5b 100644
--- a/arch/arm/mach-s3c2440/mach-nexcoder.c
+++ b/arch/arm/mach-s3c2440/mach-nexcoder.c
@@ -158,5 +158,5 @@ MACHINE_START(NEXCODER_2440, "NexVision - Nexcoder 2440")
 	.init_machine	= nexcoder_init,
 	.init_irq	= s3c24xx_init_irq,
 	.timer		= &s3c24xx_timer,
-	.restart	= s3c2440_restart,
+	.restart	= s3c244x_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c2440/mach-osiris.c b/arch/arm/mach-s3c2440/mach-osiris.c
index 4c480ef734f..c5daeb612a8 100644
--- a/arch/arm/mach-s3c2440/mach-osiris.c
+++ b/arch/arm/mach-s3c2440/mach-osiris.c
@@ -436,5 +436,5 @@ MACHINE_START(OSIRIS, "Simtec-OSIRIS")
 	.init_irq	= s3c24xx_init_irq,
 	.init_machine	= osiris_init,
 	.timer		= &s3c24xx_timer,
-	.restart	= s3c2440_restart,
+	.restart	= s3c244x_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c2440/mach-rx1950.c b/arch/arm/mach-s3c2440/mach-rx1950.c
index 80077f6472e..6f68abf44fa 100644
--- a/arch/arm/mach-s3c2440/mach-rx1950.c
+++ b/arch/arm/mach-s3c2440/mach-rx1950.c
@@ -822,5 +822,5 @@ MACHINE_START(RX1950, "HP iPAQ RX1950")
 	.init_irq = s3c24xx_init_irq,
 	.init_machine = rx1950_init_machine,
 	.timer = &s3c24xx_timer,
-	.restart	= s3c2440_restart,
+	.restart	= s3c244x_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c2440/mach-rx3715.c b/arch/arm/mach-s3c2440/mach-rx3715.c
index 20103bafbd4..56af3544759 100644
--- a/arch/arm/mach-s3c2440/mach-rx3715.c
+++ b/arch/arm/mach-s3c2440/mach-rx3715.c
@@ -213,5 +213,5 @@ MACHINE_START(RX3715, "IPAQ-RX3715")
 	.init_irq	= rx3715_init_irq,
 	.init_machine	= rx3715_init_machine,
 	.timer		= &s3c24xx_timer,
-	.restart	= s3c2440_restart,
+	.restart	= s3c244x_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c2440/mach-smdk2440.c b/arch/arm/mach-s3c2440/mach-smdk2440.c
index 1deb60d12a6..83a1036d7dc 100644
--- a/arch/arm/mach-s3c2440/mach-smdk2440.c
+++ b/arch/arm/mach-s3c2440/mach-smdk2440.c
@@ -183,5 +183,5 @@ MACHINE_START(S3C2440, "SMDK2440")
 	.map_io		= smdk2440_map_io,
 	.init_machine	= smdk2440_machine_init,
 	.timer		= &s3c24xx_timer,
-	.restart	= s3c2440_restart,
+	.restart	= s3c244x_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c2440/s3c2440.c b/arch/arm/mach-s3c2440/s3c2440.c
index 517623a09fc..2b3dddb49af 100644
--- a/arch/arm/mach-s3c2440/s3c2440.c
+++ b/arch/arm/mach-s3c2440/s3c2440.c
@@ -35,7 +35,6 @@
 #include <plat/cpu.h>
 #include <plat/s3c244x.h>
 #include <plat/pm.h>
-#include <plat/watchdog-reset.h>
 
 #include <plat/gpio-core.h>
 #include <plat/gpio-cfg.h>
@@ -74,15 +73,3 @@ void __init s3c2440_map_io(void)
 	s3c24xx_gpiocfg_default.set_pull = s3c24xx_gpio_setpull_1up;
 	s3c24xx_gpiocfg_default.get_pull = s3c24xx_gpio_getpull_1up;
 }
-
-void s3c2440_restart(char mode, const char *cmd)
-{
-	if (mode == 's') {
-		soft_restart(0);
-	}
-
-	arch_wdt_reset();
-
-	/* we'll take a jump through zero as a poor second */
-	soft_restart(0);
-}
diff --git a/arch/arm/mach-s3c2440/s3c244x.c b/arch/arm/mach-s3c2440/s3c244x.c
index 36bc60f61d0..744930a870e 100644
--- a/arch/arm/mach-s3c2440/s3c244x.c
+++ b/arch/arm/mach-s3c2440/s3c244x.c
@@ -46,6 +46,7 @@
 #include <plat/pm.h>
 #include <plat/pll.h>
 #include <plat/nand-core.h>
+#include <plat/watchdog-reset.h>
 
 static struct map_desc s3c244x_iodesc[] __initdata = {
 	IODESC_ENT(CLKPWR),
@@ -196,3 +197,13 @@ struct syscore_ops s3c244x_pm_syscore_ops = {
 	.suspend	= s3c244x_suspend,
 	.resume		= s3c244x_resume,
 };
+
+void s3c244x_restart(char mode, const char *cmd)
+{
+	if (mode == 's')
+		soft_restart(0);
+
+	arch_wdt_reset();
+
+	/* we'll take a jump through zero as a poor second */
+	soft_restart(0);
-- 
cgit v1.2.3-70-g09d2


From a97f4f5e524bcd09a85ef0b8821a14d35e69335f Mon Sep 17 00:00:00 2001
From: Jonathan Nieder <jrnieder@gmail.com>
Date: Tue, 28 Feb 2012 15:31:35 -0600
Subject: x86/PCI: do not tie MSI MS-7253 use_crs quirk to BIOS version

Carlos was getting

	WARNING: at drivers/pci/pci.c:118 pci_ioremap_bar+0x24/0x52()

when probing his sound card, and sound did not work.  After adding
pci=use_crs to the kernel command line, no more trouble.

Ok, we can add a quirk.  dmidecode output reveals that this is an MSI
MS-7253, for which we already have a quirk, but the short-sighted
author tied the quirk to a single BIOS version, making it not kick in
on Carlos's machine with BIOS V1.2.  If a later BIOS update makes it
no longer necessary to look at the _CRS info it will still be
harmless, so let's stop trying to guess which versions have and don't
have accurate _CRS tables.

Addresses https://bugtrack.alsa-project.org/alsa-bug/view.php?id=5533
Also see <https://bugzilla.kernel.org/show_bug.cgi?id=42619>.

Reported-by: Carlos Luna <caralu74@gmail.com>
Reviewed-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
---
 arch/x86/pci/acpi.c | 1 -
 1 file changed, 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/pci/acpi.c b/arch/x86/pci/acpi.c
index 7034c081b22..49a5cb55429 100644
--- a/arch/x86/pci/acpi.c
+++ b/arch/x86/pci/acpi.c
@@ -68,7 +68,6 @@ static const struct dmi_system_id pci_use_crs_table[] __initconst = {
 			DMI_MATCH(DMI_BOARD_VENDOR, "MICRO-STAR INTERNATIONAL CO., LTD"),
 			DMI_MATCH(DMI_BOARD_NAME, "MS-7253"),
 			DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix Technologies, LTD"),
-			DMI_MATCH(DMI_BIOS_VERSION, "V1.6"),
 		},
 	},
 
-- 
cgit v1.2.3-70-g09d2


From 1018faa6cf23b256bf25919ef203cd7c129f06f2 Mon Sep 17 00:00:00 2001
From: Joerg Roedel <joerg.roedel@amd.com>
Date: Wed, 29 Feb 2012 14:57:32 +0100
Subject: perf/x86/kvm: Fix Host-Only/Guest-Only counting with SVM disabled

It turned out that a performance counter on AMD does not
count at all when the GO or HO bit is set in the control
register and SVM is disabled in EFER.

This patch works around this issue by masking out the HO bit
in the performance counter control register when SVM is not
enabled.

The GO bit is not touched because it is only set when the
user wants to count in guest-mode only. So when SVM is
disabled the counter should not run at all and the
not-counting is the intended behaviour.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Avi Kivity <avi@redhat.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Gleb Natapov <gleb@redhat.com>
Cc: Robert Richter <robert.richter@amd.com>
Cc: stable@vger.kernel.org # v3.2
Link: http://lkml.kernel.org/r/1330523852-19566-1-git-send-email-joerg.roedel@amd.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/perf_event.h    |  8 ++++++++
 arch/x86/kernel/cpu/perf_event.h     |  8 ++++++--
 arch/x86/kernel/cpu/perf_event_amd.c | 37 ++++++++++++++++++++++++++++++++++--
 arch/x86/kvm/svm.c                   |  5 +++++
 4 files changed, 54 insertions(+), 4 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/perf_event.h b/arch/x86/include/asm/perf_event.h
index 096c975e099..461ce432b1c 100644
--- a/arch/x86/include/asm/perf_event.h
+++ b/arch/x86/include/asm/perf_event.h
@@ -242,4 +242,12 @@ static inline void perf_get_x86_pmu_capability(struct x86_pmu_capability *cap)
 static inline void perf_events_lapic_init(void)	{ }
 #endif
 
+#if defined(CONFIG_PERF_EVENTS) && defined(CONFIG_CPU_SUP_AMD)
+ extern void amd_pmu_enable_virt(void);
+ extern void amd_pmu_disable_virt(void);
+#else
+ static inline void amd_pmu_enable_virt(void) { }
+ static inline void amd_pmu_disable_virt(void) { }
+#endif
+
 #endif /* _ASM_X86_PERF_EVENT_H */
diff --git a/arch/x86/kernel/cpu/perf_event.h b/arch/x86/kernel/cpu/perf_event.h
index 8944062f46e..c30c807ddc7 100644
--- a/arch/x86/kernel/cpu/perf_event.h
+++ b/arch/x86/kernel/cpu/perf_event.h
@@ -147,7 +147,9 @@ struct cpu_hw_events {
 	/*
 	 * AMD specific bits
 	 */
-	struct amd_nb		*amd_nb;
+	struct amd_nb			*amd_nb;
+	/* Inverted mask of bits to clear in the perf_ctr ctrl registers */
+	u64				perf_ctr_virt_mask;
 
 	void				*kfree_on_online;
 };
@@ -417,9 +419,11 @@ void x86_pmu_disable_all(void);
 static inline void __x86_pmu_enable_event(struct hw_perf_event *hwc,
 					  u64 enable_mask)
 {
+	u64 disable_mask = __this_cpu_read(cpu_hw_events.perf_ctr_virt_mask);
+
 	if (hwc->extra_reg.reg)
 		wrmsrl(hwc->extra_reg.reg, hwc->extra_reg.config);
-	wrmsrl(hwc->config_base, hwc->config | enable_mask);
+	wrmsrl(hwc->config_base, (hwc->config | enable_mask) & ~disable_mask);
 }
 
 void x86_pmu_enable_all(int added);
diff --git a/arch/x86/kernel/cpu/perf_event_amd.c b/arch/x86/kernel/cpu/perf_event_amd.c
index 0397b23be8e..67250a52430 100644
--- a/arch/x86/kernel/cpu/perf_event_amd.c
+++ b/arch/x86/kernel/cpu/perf_event_amd.c
@@ -1,4 +1,5 @@
 #include <linux/perf_event.h>
+#include <linux/export.h>
 #include <linux/types.h>
 #include <linux/init.h>
 #include <linux/slab.h>
@@ -357,7 +358,9 @@ static void amd_pmu_cpu_starting(int cpu)
 	struct amd_nb *nb;
 	int i, nb_id;
 
-	if (boot_cpu_data.x86_max_cores < 2)
+	cpuc->perf_ctr_virt_mask = AMD_PERFMON_EVENTSEL_HOSTONLY;
+
+	if (boot_cpu_data.x86_max_cores < 2 || boot_cpu_data.x86 == 0x15)
 		return;
 
 	nb_id = amd_get_nb_id(cpu);
@@ -587,9 +590,9 @@ static __initconst const struct x86_pmu amd_pmu_f15h = {
 	.put_event_constraints	= amd_put_event_constraints,
 
 	.cpu_prepare		= amd_pmu_cpu_prepare,
-	.cpu_starting		= amd_pmu_cpu_starting,
 	.cpu_dead		= amd_pmu_cpu_dead,
 #endif
+	.cpu_starting		= amd_pmu_cpu_starting,
 };
 
 __init int amd_pmu_init(void)
@@ -621,3 +624,33 @@ __init int amd_pmu_init(void)
 
 	return 0;
 }
+
+void amd_pmu_enable_virt(void)
+{
+	struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
+
+	cpuc->perf_ctr_virt_mask = 0;
+
+	/* Reload all events */
+	x86_pmu_disable_all();
+	x86_pmu_enable_all(0);
+}
+EXPORT_SYMBOL_GPL(amd_pmu_enable_virt);
+
+void amd_pmu_disable_virt(void)
+{
+	struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
+
+	/*
+	 * We only mask out the Host-only bit so that host-only counting works
+	 * when SVM is disabled. If someone sets up a guest-only counter when
+	 * SVM is disabled the Guest-only bits still gets set and the counter
+	 * will not count anything.
+	 */
+	cpuc->perf_ctr_virt_mask = AMD_PERFMON_EVENTSEL_HOSTONLY;
+
+	/* Reload all events */
+	x86_pmu_disable_all();
+	x86_pmu_enable_all(0);
+}
+EXPORT_SYMBOL_GPL(amd_pmu_disable_virt);
diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c
index 5fa553babe5..e385214711c 100644
--- a/arch/x86/kvm/svm.c
+++ b/arch/x86/kvm/svm.c
@@ -29,6 +29,7 @@
 #include <linux/ftrace_event.h>
 #include <linux/slab.h>
 
+#include <asm/perf_event.h>
 #include <asm/tlbflush.h>
 #include <asm/desc.h>
 #include <asm/kvm_para.h>
@@ -575,6 +576,8 @@ static void svm_hardware_disable(void *garbage)
 		wrmsrl(MSR_AMD64_TSC_RATIO, TSC_RATIO_DEFAULT);
 
 	cpu_svm_disable();
+
+	amd_pmu_disable_virt();
 }
 
 static int svm_hardware_enable(void *garbage)
@@ -622,6 +625,8 @@ static int svm_hardware_enable(void *garbage)
 
 	svm_init_erratum_383();
 
+	amd_pmu_enable_virt();
+
 	return 0;
 }
 
-- 
cgit v1.2.3-70-g09d2


From e39d40c65dfd8390b50c03482ae9e289b8a8f351 Mon Sep 17 00:00:00 2001
From: Gusakov Andrey <dron0gus@gmail.com>
Date: Sat, 3 Mar 2012 07:32:36 +0900
Subject: ARM: S3C24XX: DMA resume regression fix

s3c2410_dma_suspend suspends channels from 0 to dma_channels.
s3c2410_dma_resume resumes channels in reverse order. So
pointer should be decremented instead of being incremented.

Signed-off-by: Gusakov Andrey <dron0gus@gmail.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
 arch/arm/plat-s3c24xx/dma.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/plat-s3c24xx/dma.c b/arch/arm/plat-s3c24xx/dma.c
index 9fe35348e03..2bab4c99a23 100644
--- a/arch/arm/plat-s3c24xx/dma.c
+++ b/arch/arm/plat-s3c24xx/dma.c
@@ -1249,7 +1249,7 @@ static void s3c2410_dma_resume(void)
 	struct s3c2410_dma_chan *cp = s3c2410_chans + dma_channels - 1;
 	int channel;
 
-	for (channel = dma_channels - 1; channel >= 0; cp++, channel--)
+	for (channel = dma_channels - 1; channel >= 0; cp--, channel--)
 		s3c2410_dma_resume_chan(cp);
 }
 
-- 
cgit v1.2.3-70-g09d2


From 134d12fae0bb8f3d60dc7440a9e1950bb5427167 Mon Sep 17 00:00:00 2001
From: Ohad Ben-Cohen <ohad@wizery.com>
Date: Sun, 4 Mar 2012 12:01:11 +0200
Subject: ARM: OMAP: fix iommu, not mailbox

For some weird (freudian?) reason, commit 435792d "ARM: OMAP: make
iommu subsys_initcall to fix builtin omap3isp" unintentionally changed
the mailbox's initcall instead of the iommu's.

Fix that.

Reported-by: Fernando Guzman Lugo <fernando.lugo@ti.com>
Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Joerg Roedel <Joerg.Roedel@amd.com>
Cc: Tony Lindgren <tony@atomide.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
---
 arch/arm/mach-omap2/mailbox.c    | 3 +--
 arch/arm/mach-omap2/omap-iommu.c | 3 ++-
 2 files changed, 3 insertions(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/mailbox.c b/arch/arm/mach-omap2/mailbox.c
index a6db1e4f7b6..609ea2ded7e 100644
--- a/arch/arm/mach-omap2/mailbox.c
+++ b/arch/arm/mach-omap2/mailbox.c
@@ -412,8 +412,7 @@ static void __exit omap2_mbox_exit(void)
 	platform_driver_unregister(&omap2_mbox_driver);
 }
 
-/* must be ready before omap3isp is probed */
-subsys_initcall(omap2_mbox_init);
+module_init(omap2_mbox_init);
 module_exit(omap2_mbox_exit);
 
 MODULE_LICENSE("GPL v2");
diff --git a/arch/arm/mach-omap2/omap-iommu.c b/arch/arm/mach-omap2/omap-iommu.c
index b8822048e40..ac49384d028 100644
--- a/arch/arm/mach-omap2/omap-iommu.c
+++ b/arch/arm/mach-omap2/omap-iommu.c
@@ -150,7 +150,8 @@ err_out:
 		platform_device_put(omap_iommu_pdev[i]);
 	return err;
 }
-module_init(omap_iommu_init);
+/* must be ready before omap3isp is probed */
+subsys_initcall(omap_iommu_init);
 
 static void __exit omap_iommu_exit(void)
 {
-- 
cgit v1.2.3-70-g09d2


From 6414fa6a150111750011f477899d370244da4171 Mon Sep 17 00:00:00 2001
From: Al Viro <viro@ZenIV.linux.org.uk>
Date: Mon, 5 Mar 2012 06:38:42 +0000
Subject: aout: move setup_arg_pages() prior to reading/mapping the binary

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/x86/ia32/ia32_aout.c | 14 +++++++-------
 fs/binfmt_aout.c          | 14 +++++++-------
 2 files changed, 14 insertions(+), 14 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/ia32/ia32_aout.c b/arch/x86/ia32/ia32_aout.c
index fd843877e84..39e49091f64 100644
--- a/arch/x86/ia32/ia32_aout.c
+++ b/arch/x86/ia32/ia32_aout.c
@@ -315,6 +315,13 @@ static int load_aout_binary(struct linux_binprm *bprm, struct pt_regs *regs)
 	current->mm->free_area_cache = TASK_UNMAPPED_BASE;
 	current->mm->cached_hole_size = 0;
 
+	retval = setup_arg_pages(bprm, IA32_STACK_TOP, EXSTACK_DEFAULT);
+	if (retval < 0) {
+		/* Someone check-me: is this error path enough? */
+		send_sig(SIGKILL, current, 0);
+		return retval;
+	}
+
 	install_exec_creds(bprm);
 	current->flags &= ~PF_FORKNOEXEC;
 
@@ -410,13 +417,6 @@ beyond_if:
 
 	set_brk(current->mm->start_brk, current->mm->brk);
 
-	retval = setup_arg_pages(bprm, IA32_STACK_TOP, EXSTACK_DEFAULT);
-	if (retval < 0) {
-		/* Someone check-me: is this error path enough? */
-		send_sig(SIGKILL, current, 0);
-		return retval;
-	}
-
 	current->mm->start_stack =
 		(unsigned long)create_aout_tables((char __user *)bprm->p, bprm);
 	/* start thread */
diff --git a/fs/binfmt_aout.c b/fs/binfmt_aout.c
index a6395bdb26a..1ff94054d35 100644
--- a/fs/binfmt_aout.c
+++ b/fs/binfmt_aout.c
@@ -259,6 +259,13 @@ static int load_aout_binary(struct linux_binprm * bprm, struct pt_regs * regs)
 	current->mm->free_area_cache = current->mm->mmap_base;
 	current->mm->cached_hole_size = 0;
 
+	retval = setup_arg_pages(bprm, STACK_TOP, EXSTACK_DEFAULT);
+	if (retval < 0) {
+		/* Someone check-me: is this error path enough? */
+		send_sig(SIGKILL, current, 0);
+		return retval;
+	}
+
 	install_exec_creds(bprm);
  	current->flags &= ~PF_FORKNOEXEC;
 
@@ -352,13 +359,6 @@ beyond_if:
 		return retval;
 	}
 
-	retval = setup_arg_pages(bprm, STACK_TOP, EXSTACK_DEFAULT);
-	if (retval < 0) { 
-		/* Someone check-me: is this error path enough? */ 
-		send_sig(SIGKILL, current, 0); 
-		return retval;
-	}
-
 	current->mm->start_stack =
 		(unsigned long) create_aout_tables((char __user *) bprm->p, bprm);
 #ifdef __alpha__
-- 
cgit v1.2.3-70-g09d2


From cc4ad9072cce2bf0eeae1fb197e42612fbac1f15 Mon Sep 17 00:00:00 2001
From: R Sricharan <r.sricharan@ti.com>
Date: Fri, 2 Mar 2012 16:31:18 +0530
Subject: ARM: OMAP2+: Fix module build errors with CONFIG_OMAP4_ERRATA_I688

While building modules with randconfig the below errors are observed.

ERROR: "omap_bus_sync" [drivers/watchdog/sp805_wdt.ko] undefined!
ERROR: "omap_bus_sync" [drivers/watchdog/dw_wdt.ko] undefined!
ERROR: "omap_bus_sync" [drivers/virtio/virtio_ring.ko] undefined!
ERROR: "omap_bus_sync" [drivers/video/sm501fb.ko] undefined!
ERROR: "omap_bus_sync" [drivers/usb/mon/usbmon.ko] undefined!
ERROR: "omap_bus_sync" [drivers/usb/host/sl811-hcd.ko] undefined!
ERROR: "omap_bus_sync" [drivers/usb/host/ohci-hcd.ko] undefined!
ERROR: "omap_bus_sync" [drivers/usb/host/isp1760.ko] undefined!
ERROR: "omap_bus_sync" [drivers/usb/host/isp1362-hcd.ko] undefined!
ERROR: "omap_bus_sync" [drivers/usb/host/isp116x-hcd.ko] undefined!
ERROR: "omap_bus_sync" [drivers/usb/core/usbcore.ko] undefined!
ERROR: "omap_bus_sync" [drivers/tty/serial/altera_uart.ko] undefined!
ERROR: "omap_bus_sync" [drivers/tty/serial/altera_jtaguart.ko] undefined!
ERROR: "omap_bus_sync" [drivers/tty/serial/8250/8250_dw.ko] undefined!
ERROR: "omap_bus_sync" [drivers/ssb/ssb.ko] undefined!
ERROR: "omap_bus_sync" [drivers/rtc/rtc-cmos.ko] undefined!
ERROR: "omap_bus_sync" [drivers/rtc/rtc-bq4802.ko] undefined!
ERROR: "omap_bus_sync" [drivers/mtd/nand/tmio_nand.ko] undefined!
ERROR: "omap_bus_sync" [drivers/mtd/nand/omap2.ko] undefined!

Signed-off-by: R Sricharan <r.sricharan@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/omap4-common.c | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/omap4-common.c b/arch/arm/mach-omap2/omap4-common.c
index ebc59509131..70de277f5c1 100644
--- a/arch/arm/mach-omap2/omap4-common.c
+++ b/arch/arm/mach-omap2/omap4-common.c
@@ -31,6 +31,7 @@
 
 #include "common.h"
 #include "omap4-sar-layout.h"
+#include <linux/export.h>
 
 #ifdef CONFIG_CACHE_L2X0
 static void __iomem *l2cache_base;
@@ -55,6 +56,7 @@ void omap_bus_sync(void)
 		isb();
 	}
 }
+EXPORT_SYMBOL(omap_bus_sync);
 
 /* Steal one page physical memory for barrier implementation */
 int __init omap_barrier_reserve_memblock(void)
-- 
cgit v1.2.3-70-g09d2


From 81caaf2503be8fbb738ea4f124063dcc24958397 Mon Sep 17 00:00:00 2001
From: Russell King <rmk+kernel@arm.linux.org.uk>
Date: Mon, 5 Mar 2012 23:29:51 +0000
Subject: ARM: ecard: ensure fake vma vm_flags is setup

Our TLB ops want to check the vma vm_flags to find out whether the
mapping is executable.  However, we leave this uninitialized in
ecard.c.  Initialize it with an appropriate value.

Reported-by: Al Viro <viro@ftp.linux.org.uk>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/kernel/ecard.c | 1 +
 1 file changed, 1 insertion(+)

(limited to 'arch')

diff --git a/arch/arm/kernel/ecard.c b/arch/arm/kernel/ecard.c
index 4dd0edab6a6..1651d495074 100644
--- a/arch/arm/kernel/ecard.c
+++ b/arch/arm/kernel/ecard.c
@@ -242,6 +242,7 @@ static void ecard_init_pgtables(struct mm_struct *mm)
 
 	memcpy(dst_pgd, src_pgd, sizeof(pgd_t) * (EASI_SIZE / PGDIR_SIZE));
 
+	vma.vm_flags = VM_EXEC;
 	vma.vm_mm = mm;
 
 	flush_tlb_range(&vma, IO_START, IO_START + IO_SIZE);
-- 
cgit v1.2.3-70-g09d2


From 62aca403657fe30e5235c5331e9871e676d9ea0a Mon Sep 17 00:00:00 2001
From: Andrew Morton <akpm@linux-foundation.org>
Date: Mon, 5 Mar 2012 14:59:19 -0800
Subject: alpha: fix 32/64-bit bug in futex support

Michael Cree said:

: : I have noticed some user space problems (pulseaudio crashes in pthread
: : code, glibc/nptl test suite failures, java compiler freezes on SMP alpha
: : systems) that arise when using a 2.6.39 or later kernel on Alpha.
: : Bisecting between 2.6.38 and 2.6.39 (using glibc/nptl test suite as
: : criterion for good/bad kernel) eventually leads to:
: :
: : 8d7718aa082aaf30a0b4989e1f04858952f941bc is the first bad commit
: : commit 8d7718aa082aaf30a0b4989e1f04858952f941bc
: : Author: Michel Lespinasse <walken@google.com>
: : Date:   Thu Mar 10 18:50:58 2011 -0800
: :
: :     futex: Sanitize futex ops argument types
: :
: :     Change futex_atomic_op_inuser and futex_atomic_cmpxchg_inatomic
: :     prototypes to use u32 types for the futex as this is the data type the
: :     futex core code uses all over the place.
: :
: : Looking at the commit I see there is a change of the uaddr argument in
: : the Alpha architecture specific code for futexes from int to u32, but I
: : don't see why this should cause a problem.

Richard Henderson said:

: futex_atomic_cmpxchg_inatomic(u32 *uval, u32 __user *uaddr,
:                               u32 oldval, u32 newval)
: ...
:         :       "r"(uaddr), "r"((long)oldval), "r"(newval)
:
:
: There is no 32-bit compare instruction.  These are implemented by
: consistently extending the values to a 64-bit type.  Since the
: load instruction sign-extends, we want to sign-extend the other
: quantity as well (despite the fact it's logically unsigned).
:
: So:
:
: -        :       "r"(uaddr), "r"((long)oldval), "r"(newval)
: +        :       "r"(uaddr), "r"((long)(int)oldval), "r"(newval)
:
: should do the trick.

Michael said:

: This fixes the glibc test suite failures and the pulseaudio related
: crashes, but it does not fix the java compiiler lockups that I was (and
: are still) observing.  That is some other problem.

Reported-by: Michael Cree <mcree@orcon.net.nz>
Tested-by: Michael Cree <mcree@orcon.net.nz>
Acked-by: Phil Carmody <ext-phil.2.carmody@nokia.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Michel Lespinasse <walken@google.com>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/alpha/include/asm/futex.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/alpha/include/asm/futex.h b/arch/alpha/include/asm/futex.h
index e8a761aee08..f939794363a 100644
--- a/arch/alpha/include/asm/futex.h
+++ b/arch/alpha/include/asm/futex.h
@@ -108,7 +108,7 @@ futex_atomic_cmpxchg_inatomic(u32 *uval, u32 __user *uaddr,
 	"	lda	$31,3b-2b(%0)\n"
 	"	.previous\n"
 	:	"+r"(ret), "=&r"(prev), "=&r"(cmp)
-	:	"r"(uaddr), "r"((long)oldval), "r"(newval)
+	:	"r"(uaddr), "r"((long)(int)oldval), "r"(newval)
 	:	"memory");
 
 	*uval = prev;
-- 
cgit v1.2.3-70-g09d2


From bbdc818b270ab47658019fb1d67a0f14e9b17985 Mon Sep 17 00:00:00 2001
From: Haojian Zhuang <haojian.zhuang@marvell.com>
Date: Tue, 28 Feb 2012 10:57:48 +0800
Subject: ARM: pxa: add dummy clock for pxa25x and pxa27x

gpio-pxa driver is shared among arch-pxa and arch-mmp. Clock is the
essential component on pxa3xx/pxa95x and arch-mmp. So we need to
define dummy clock in pxa25x/pxa27x instead.

This regression was introduced by the commit "ARM: pxa: add dummy
clock for sa1100-rtc", id a55b5adaf403c4d032e0871ad4ee3367782f4db6.

Reported-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Paul Parsons <lost.distance@yahoo.com>
Tested-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
---
 arch/arm/mach-pxa/pxa25x.c | 1 +
 arch/arm/mach-pxa/pxa27x.c | 1 +
 2 files changed, 2 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-pxa/pxa25x.c b/arch/arm/mach-pxa/pxa25x.c
index 00d6eacab8e..d8de3e50a78 100644
--- a/arch/arm/mach-pxa/pxa25x.c
+++ b/arch/arm/mach-pxa/pxa25x.c
@@ -208,6 +208,7 @@ static struct clk_lookup pxa25x_clkregs[] = {
 	INIT_CLKREG(&clk_pxa25x_gpio11, NULL, "GPIO11_CLK"),
 	INIT_CLKREG(&clk_pxa25x_gpio12, NULL, "GPIO12_CLK"),
 	INIT_CLKREG(&clk_pxa25x_mem, "pxa2xx-pcmcia", NULL),
+	INIT_CLKREG(&clk_dummy, "pxa-gpio", NULL),
 };
 
 static struct clk_lookup pxa25x_hwuart_clkreg =
diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c
index c1673b3441d..a3fabc9dfa2 100644
--- a/arch/arm/mach-pxa/pxa27x.c
+++ b/arch/arm/mach-pxa/pxa27x.c
@@ -229,6 +229,7 @@ static struct clk_lookup pxa27x_clkregs[] = {
 	INIT_CLKREG(&clk_pxa27x_im, NULL, "IMCLK"),
 	INIT_CLKREG(&clk_pxa27x_memc, NULL, "MEMCLK"),
 	INIT_CLKREG(&clk_pxa27x_mem, "pxa2xx-pcmcia", NULL),
+	INIT_CLKREG(&clk_dummy, "pxa-gpio", NULL),
 };
 
 #ifdef CONFIG_PM
-- 
cgit v1.2.3-70-g09d2


From 0c7de34be3e1f0c3031f9e0c23d3d7e51db317ba Mon Sep 17 00:00:00 2001
From: Haojian Zhuang <haojian.zhuang@gmail.com>
Date: Tue, 6 Mar 2012 14:37:04 +0800
Subject: ARM: pxa: remove duplicated registeration on pxa-gpio

Both reboot (via reboot(RB_AUTOBOOT)) and suspend freeze on hx4700.

Registration of pxa_gpio_syscore_ops is moved into pxa-gpio driver,
but it still exists in arch-pxa directory. It resulsts failure on
reboot and suspend.

Now remove the registration code in arch-pxa.

Reported-by: Paul Parsons <lost.distance@yahoo.com>
Signed-off-by: Haojian Zhuang <haojian.zhuang@gmail.com>
---
 arch/arm/mach-pxa/generic.h | 1 -
 arch/arm/mach-pxa/pxa25x.c  | 1 -
 arch/arm/mach-pxa/pxa27x.c  | 1 -
 arch/arm/mach-pxa/pxa3xx.c  | 1 -
 arch/arm/mach-pxa/pxa95x.c  | 1 -
 5 files changed, 5 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-pxa/generic.h b/arch/arm/mach-pxa/generic.h
index 0d729e6619d..42d5cca6625 100644
--- a/arch/arm/mach-pxa/generic.h
+++ b/arch/arm/mach-pxa/generic.h
@@ -49,7 +49,6 @@ extern unsigned pxa3xx_get_clk_frequency_khz(int);
 #endif
 
 extern struct syscore_ops pxa_irq_syscore_ops;
-extern struct syscore_ops pxa_gpio_syscore_ops;
 extern struct syscore_ops pxa2xx_mfp_syscore_ops;
 extern struct syscore_ops pxa3xx_mfp_syscore_ops;
 
diff --git a/arch/arm/mach-pxa/pxa25x.c b/arch/arm/mach-pxa/pxa25x.c
index d8de3e50a78..3352b37b60c 100644
--- a/arch/arm/mach-pxa/pxa25x.c
+++ b/arch/arm/mach-pxa/pxa25x.c
@@ -368,7 +368,6 @@ static int __init pxa25x_init(void)
 
 		register_syscore_ops(&pxa_irq_syscore_ops);
 		register_syscore_ops(&pxa2xx_mfp_syscore_ops);
-		register_syscore_ops(&pxa_gpio_syscore_ops);
 		register_syscore_ops(&pxa2xx_clock_syscore_ops);
 
 		ret = platform_add_devices(pxa25x_devices,
diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c
index a3fabc9dfa2..6bce78edce7 100644
--- a/arch/arm/mach-pxa/pxa27x.c
+++ b/arch/arm/mach-pxa/pxa27x.c
@@ -456,7 +456,6 @@ static int __init pxa27x_init(void)
 
 		register_syscore_ops(&pxa_irq_syscore_ops);
 		register_syscore_ops(&pxa2xx_mfp_syscore_ops);
-		register_syscore_ops(&pxa_gpio_syscore_ops);
 		register_syscore_ops(&pxa2xx_clock_syscore_ops);
 
 		ret = platform_add_devices(devices, ARRAY_SIZE(devices));
diff --git a/arch/arm/mach-pxa/pxa3xx.c b/arch/arm/mach-pxa/pxa3xx.c
index 4f402afa660..3918a672238 100644
--- a/arch/arm/mach-pxa/pxa3xx.c
+++ b/arch/arm/mach-pxa/pxa3xx.c
@@ -462,7 +462,6 @@ static int __init pxa3xx_init(void)
 
 		register_syscore_ops(&pxa_irq_syscore_ops);
 		register_syscore_ops(&pxa3xx_mfp_syscore_ops);
-		register_syscore_ops(&pxa_gpio_syscore_ops);
 		register_syscore_ops(&pxa3xx_clock_syscore_ops);
 
 		ret = platform_add_devices(devices, ARRAY_SIZE(devices));
diff --git a/arch/arm/mach-pxa/pxa95x.c b/arch/arm/mach-pxa/pxa95x.c
index d082a583df7..5ce434b95e8 100644
--- a/arch/arm/mach-pxa/pxa95x.c
+++ b/arch/arm/mach-pxa/pxa95x.c
@@ -283,7 +283,6 @@ static int __init pxa95x_init(void)
 			return ret;
 
 		register_syscore_ops(&pxa_irq_syscore_ops);
-		register_syscore_ops(&pxa_gpio_syscore_ops);
 		register_syscore_ops(&pxa3xx_clock_syscore_ops);
 
 		ret = platform_add_devices(devices, ARRAY_SIZE(devices));
-- 
cgit v1.2.3-70-g09d2


From af829310e8a914ad17ed61a7b18b14b4f457bca1 Mon Sep 17 00:00:00 2001
From: Haojian Zhuang <haojian.zhuang@gmail.com>
Date: Tue, 6 Mar 2012 14:57:16 +0800
Subject: ARM: pxa: fix invalid mfp pin issue

Failure is reported on hx4700 with kernel v3.3-rc1.

__mfp_validate: GPIO20 is invalid pin
__mfp_validate: GPIO21 is invalid pin
__mfp_validate: GPIO15 is invalid pin
__mfp_validate: GPIO78 is invalid pin
__mfp_validate: GPIO79 is invalid pin
__mfp_validate: GPIO80 is invalid pin
__mfp_validate: GPIO33 is invalid pin
__mfp_validate: GPIO48 is invalid pin
__mfp_validate: GPIO49 is invalid pin
__mfp_validate: GPIO50 is invalid pin

Since pxa_last_gpio is used in mfp-pxa2xx driver. But it's only
updated in pxa-gpio driver that run after mfp-pxa2xx driver.

So update the pxa_last_gpio first in mfp-pxa2xx driver.

Reported-by: Paul Parsons <lost.distance@yahoo.com>
Signed-off-by: Haojian Zhuang <haojian.zhuang@gmail.com>
---
 arch/arm/mach-pxa/mfp-pxa2xx.c | 7 +++++++
 1 file changed, 7 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-pxa/mfp-pxa2xx.c b/arch/arm/mach-pxa/mfp-pxa2xx.c
index f14775536b8..29b62afc6f7 100644
--- a/arch/arm/mach-pxa/mfp-pxa2xx.c
+++ b/arch/arm/mach-pxa/mfp-pxa2xx.c
@@ -226,6 +226,12 @@ static void __init pxa25x_mfp_init(void)
 {
 	int i;
 
+	/* running before pxa_gpio_probe() */
+#ifdef CONFIG_CPU_PXA26x
+	pxa_last_gpio = 89;
+#else
+	pxa_last_gpio = 84;
+#endif
 	for (i = 0; i <= pxa_last_gpio; i++)
 		gpio_desc[i].valid = 1;
 
@@ -295,6 +301,7 @@ static void __init pxa27x_mfp_init(void)
 {
 	int i, gpio;
 
+	pxa_last_gpio = 120;	/* running before pxa_gpio_probe() */
 	for (i = 0; i <= pxa_last_gpio; i++) {
 		/* skip GPIO2, 5, 6, 7, 8, they are not
 		 * valid pins allow configuration
-- 
cgit v1.2.3-70-g09d2


From 63f32b3893aba641504d744d58ab5ed6f528fc7c Mon Sep 17 00:00:00 2001
From: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Date: Tue, 6 Mar 2012 02:25:15 -0800
Subject: ARM: EXYNOS: fix touchscreen IRQ setup on Universal C210 board

Fixes atmel_mxt_ts freeze on Universal C210.

Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
 arch/arm/mach-exynos/mach-universal_c210.c | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-exynos/mach-universal_c210.c b/arch/arm/mach-exynos/mach-universal_c210.c
index 0fc65ffde8f..38939956c34 100644
--- a/arch/arm/mach-exynos/mach-universal_c210.c
+++ b/arch/arm/mach-exynos/mach-universal_c210.c
@@ -13,6 +13,7 @@
 #include <linux/i2c.h>
 #include <linux/gpio_keys.h>
 #include <linux/gpio.h>
+#include <linux/interrupt.h>
 #include <linux/fb.h>
 #include <linux/mfd/max8998.h>
 #include <linux/regulator/machine.h>
@@ -595,6 +596,7 @@ static struct mxt_platform_data qt602240_platform_data = {
 	.threshold	= 0x28,
 	.voltage	= 2800000,		/* 2.8V */
 	.orient		= MXT_DIAGONAL,
+	.irqflags	= IRQF_TRIGGER_FALLING,
 };
 
 static struct i2c_board_info i2c3_devs[] __initdata = {
-- 
cgit v1.2.3-70-g09d2


From 1dbd02ec389b11ffc6288695e13c5754e6e07847 Mon Sep 17 00:00:00 2001
From: H Hartley Sweeten <hartleys@visionengravers.com>
Date: Thu, 1 Mar 2012 17:13:59 -0700
Subject: ARM: ep93xx: convert vision_ep9307 to MULTI_IRQ_HANDLER

As done for the other ep93xx machines in:

commit 9a6879bd902e2ec605fff4d9fb3247b440a1f66a
ARM: ep93xx: convert to MULTI_IRQ_HANDLER

Now that there is a generic IRQ handler for multiple VIC devices use it
for vision_ep9307 to help building multi platform kernels.

Signed-off-by: Hartley Sweeten <hsweeten@visionengravers.com>
Acked-by: Ryan Mallon <rmallon@gmail.com>
Reviewed-by: Jamie Iles <jamie@jamieiles.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
 arch/arm/mach-ep93xx/vision_ep9307.c | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-ep93xx/vision_ep9307.c b/arch/arm/mach-ep93xx/vision_ep9307.c
index d5fb44f16d3..d67d0b4feb6 100644
--- a/arch/arm/mach-ep93xx/vision_ep9307.c
+++ b/arch/arm/mach-ep93xx/vision_ep9307.c
@@ -34,6 +34,7 @@
 #include <mach/ep93xx_spi.h>
 #include <mach/gpio-ep93xx.h>
 
+#include <asm/hardware/vic.h>
 #include <asm/mach-types.h>
 #include <asm/mach/map.h>
 #include <asm/mach/arch.h>
@@ -361,6 +362,7 @@ MACHINE_START(VISION_EP9307, "Vision Engraving Systems EP9307")
 	.atag_offset	= 0x100,
 	.map_io		= vision_map_io,
 	.init_irq	= ep93xx_init_irq,
+	.handle_irq	= vic_handle_irq,
 	.timer		= &ep93xx_timer,
 	.init_machine	= vision_init_machine,
 	.restart	= ep93xx_restart,
-- 
cgit v1.2.3-70-g09d2


From 097d59106a8e4b42d07c9892fdd7790f1659c6ff Mon Sep 17 00:00:00 2001
From: Linus Torvalds <torvalds@linux-foundation.org>
Date: Tue, 6 Mar 2012 18:23:36 -0800
Subject: vm: avoid using find_vma_prev() unnecessarily

Several users of "find_vma_prev()" were not in fact interested in the
previous vma if there was no primary vma to be found either.  And in
those cases, we're much better off just using the regular "find_vma()",
and then "prev" can be looked up by just checking vma->vm_prev.

The find_vma_prev() semantics are fairly subtle (see Mikulas' recent
commit 83cd904d271b: "mm: fix find_vma_prev"), and the whole "return
prev by reference" means that it generates worse code too.

Thus this "let's avoid using this inconvenient and clearly too subtle
interface when we don't really have to" patch.

Cc: Mikulas Patocka <mpatocka@redhat.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/x86/mm/hugetlbpage.c | 4 +++-
 mm/mempolicy.c            | 3 ++-
 mm/mlock.c                | 3 ++-
 mm/mprotect.c             | 3 ++-
 4 files changed, 9 insertions(+), 4 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/mm/hugetlbpage.c b/arch/x86/mm/hugetlbpage.c
index f581a18c0d4..83e7141c398 100644
--- a/arch/x86/mm/hugetlbpage.c
+++ b/arch/x86/mm/hugetlbpage.c
@@ -333,13 +333,15 @@ try_again:
 		 * Lookup failure means no vma is above this address,
 		 * i.e. return with success:
 		 */
-		if (!(vma = find_vma_prev(mm, addr, &prev_vma)))
+		vma = find_vma(mm, add);
+		if (!vma)
 			return addr;
 
 		/*
 		 * new region fits between prev_vma->vm_end and
 		 * vma->vm_start, use it:
 		 */
+		prev_vma = vma->vm_prev;
 		if (addr + len <= vma->vm_start &&
 		            (!prev_vma || (addr >= prev_vma->vm_end))) {
 			/* remember the address as a hint for next time */
diff --git a/mm/mempolicy.c b/mm/mempolicy.c
index 06b145fb64a..47296fee23d 100644
--- a/mm/mempolicy.c
+++ b/mm/mempolicy.c
@@ -640,10 +640,11 @@ static int mbind_range(struct mm_struct *mm, unsigned long start,
 	unsigned long vmstart;
 	unsigned long vmend;
 
-	vma = find_vma_prev(mm, start, &prev);
+	vma = find_vma(mm, start);
 	if (!vma || vma->vm_start > start)
 		return -EFAULT;
 
+	prev = vma->vm_prev;
 	if (start > vma->vm_start)
 		prev = vma;
 
diff --git a/mm/mlock.c b/mm/mlock.c
index 4f4f53bdc65..ef726e8aa8e 100644
--- a/mm/mlock.c
+++ b/mm/mlock.c
@@ -385,10 +385,11 @@ static int do_mlock(unsigned long start, size_t len, int on)
 		return -EINVAL;
 	if (end == start)
 		return 0;
-	vma = find_vma_prev(current->mm, start, &prev);
+	vma = find_vma(current->mm, start);
 	if (!vma || vma->vm_start > start)
 		return -ENOMEM;
 
+	prev = vma->vm_prev;
 	if (start > vma->vm_start)
 		prev = vma;
 
diff --git a/mm/mprotect.c b/mm/mprotect.c
index 5a688a2756b..f437d054c3b 100644
--- a/mm/mprotect.c
+++ b/mm/mprotect.c
@@ -262,10 +262,11 @@ SYSCALL_DEFINE3(mprotect, unsigned long, start, size_t, len,
 
 	down_write(&current->mm->mmap_sem);
 
-	vma = find_vma_prev(current->mm, start, &prev);
+	vma = find_vma(current->mm, start);
 	error = -ENOMEM;
 	if (!vma)
 		goto out;
+	prev = vma->vm_prev;
 	if (unlikely(grows & PROT_GROWSDOWN)) {
 		if (vma->vm_start >= end)
 			goto out;
-- 
cgit v1.2.3-70-g09d2


From 55062d061790b43aee01ab3f9ac57b8596254f19 Mon Sep 17 00:00:00 2001
From: Linus Torvalds <torvalds@linux-foundation.org>
Date: Tue, 6 Mar 2012 18:48:13 -0800
Subject: x86: fix typo in recent find_vma_prev purge

It turns out that test-compiling this file on x86-64 doesn't really
help, because much of it is x86-32-specific.  And so I hadn't noticed
the slightly over-eager removal of the 'r' from 'addr' variable despite
thinking I had tested it.

Signed-off-by: Linus "oopsie" Torvalds <torvalds@linux-foundation.org>
---
 arch/x86/mm/hugetlbpage.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/mm/hugetlbpage.c b/arch/x86/mm/hugetlbpage.c
index 83e7141c398..8ecbb4bba4b 100644
--- a/arch/x86/mm/hugetlbpage.c
+++ b/arch/x86/mm/hugetlbpage.c
@@ -333,7 +333,7 @@ try_again:
 		 * Lookup failure means no vma is above this address,
 		 * i.e. return with success:
 		 */
-		vma = find_vma(mm, add);
+		vma = find_vma(mm, addr);
 		if (!vma)
 			return addr;
 
-- 
cgit v1.2.3-70-g09d2


From 5727347180ebc6b4a866fcbe00dcb39cc03acb37 Mon Sep 17 00:00:00 2001
From: Will Deacon <will.deacon@arm.com>
Date: Tue, 6 Mar 2012 17:33:17 +0100
Subject: ARM: 7354/1: perf: limit sample_period to half max_period in
 non-sampling mode

On ARM, the PMU does not stop counting after an overflow and therefore
IRQ latency affects the new counter value read by the kernel. This is
significant for non-sampling runs where it is possible for the new value
to overtake the previous one, causing the delta to be out by up to
max_period events.

Commit a737823d ("ARM: 6835/1: perf: ensure overflows aren't missed due
to IRQ latency") attempted to fix this problem by allowing interrupt
handlers to pass an overflow flag to the event update function, causing
the overflow calculation to assume that the counter passed through zero
when going from prev to new. Unfortunately, this doesn't work when
overflow occurs on the perf_task_tick path because we have the flag
cleared and end up computing a large negative delta.

This patch removes the overflow flag from armpmu_event_update and
instead limits the sample_period to half of the max_period for
non-sampling profiling runs.

Cc: <stable@vger.kernel.org>
Signed-off-by: Ming Lei <ming.lei@canonical.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/include/asm/pmu.h          |  2 +-
 arch/arm/kernel/perf_event.c        | 22 +++++++++++-----------
 arch/arm/kernel/perf_event_v6.c     |  2 +-
 arch/arm/kernel/perf_event_v7.c     |  2 +-
 arch/arm/kernel/perf_event_xscale.c |  4 ++--
 5 files changed, 16 insertions(+), 16 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/include/asm/pmu.h b/arch/arm/include/asm/pmu.h
index b5a5be2536c..90114faa9f3 100644
--- a/arch/arm/include/asm/pmu.h
+++ b/arch/arm/include/asm/pmu.h
@@ -134,7 +134,7 @@ int __init armpmu_register(struct arm_pmu *armpmu, char *name, int type);
 
 u64 armpmu_event_update(struct perf_event *event,
 			struct hw_perf_event *hwc,
-			int idx, int overflow);
+			int idx);
 
 int armpmu_event_set_period(struct perf_event *event,
 			    struct hw_perf_event *hwc,
diff --git a/arch/arm/kernel/perf_event.c b/arch/arm/kernel/perf_event.c
index 5bb91bf3d47..56173ae1644 100644
--- a/arch/arm/kernel/perf_event.c
+++ b/arch/arm/kernel/perf_event.c
@@ -180,7 +180,7 @@ armpmu_event_set_period(struct perf_event *event,
 u64
 armpmu_event_update(struct perf_event *event,
 		    struct hw_perf_event *hwc,
-		    int idx, int overflow)
+		    int idx)
 {
 	struct arm_pmu *armpmu = to_arm_pmu(event->pmu);
 	u64 delta, prev_raw_count, new_raw_count;
@@ -193,13 +193,7 @@ again:
 			     new_raw_count) != prev_raw_count)
 		goto again;
 
-	new_raw_count &= armpmu->max_period;
-	prev_raw_count &= armpmu->max_period;
-
-	if (overflow)
-		delta = armpmu->max_period - prev_raw_count + new_raw_count + 1;
-	else
-		delta = new_raw_count - prev_raw_count;
+	delta = (new_raw_count - prev_raw_count) & armpmu->max_period;
 
 	local64_add(delta, &event->count);
 	local64_sub(delta, &hwc->period_left);
@@ -216,7 +210,7 @@ armpmu_read(struct perf_event *event)
 	if (hwc->idx < 0)
 		return;
 
-	armpmu_event_update(event, hwc, hwc->idx, 0);
+	armpmu_event_update(event, hwc, hwc->idx);
 }
 
 static void
@@ -232,7 +226,7 @@ armpmu_stop(struct perf_event *event, int flags)
 	if (!(hwc->state & PERF_HES_STOPPED)) {
 		armpmu->disable(hwc, hwc->idx);
 		barrier(); /* why? */
-		armpmu_event_update(event, hwc, hwc->idx, 0);
+		armpmu_event_update(event, hwc, hwc->idx);
 		hwc->state |= PERF_HES_STOPPED | PERF_HES_UPTODATE;
 	}
 }
@@ -518,7 +512,13 @@ __hw_perf_event_init(struct perf_event *event)
 	hwc->config_base	    |= (unsigned long)mapping;
 
 	if (!hwc->sample_period) {
-		hwc->sample_period  = armpmu->max_period;
+		/*
+		 * For non-sampling runs, limit the sample_period to half
+		 * of the counter width. That way, the new counter value
+		 * is far less likely to overtake the previous one unless
+		 * you have some serious IRQ latency issues.
+		 */
+		hwc->sample_period  = armpmu->max_period >> 1;
 		hwc->last_period    = hwc->sample_period;
 		local64_set(&hwc->period_left, hwc->sample_period);
 	}
diff --git a/arch/arm/kernel/perf_event_v6.c b/arch/arm/kernel/perf_event_v6.c
index 533be9930ec..88bf15253fb 100644
--- a/arch/arm/kernel/perf_event_v6.c
+++ b/arch/arm/kernel/perf_event_v6.c
@@ -524,7 +524,7 @@ armv6pmu_handle_irq(int irq_num,
 			continue;
 
 		hwc = &event->hw;
-		armpmu_event_update(event, hwc, idx, 1);
+		armpmu_event_update(event, hwc, idx);
 		data.period = event->hw.last_period;
 		if (!armpmu_event_set_period(event, hwc, idx))
 			continue;
diff --git a/arch/arm/kernel/perf_event_v7.c b/arch/arm/kernel/perf_event_v7.c
index 6933244c68f..6f488610f8f 100644
--- a/arch/arm/kernel/perf_event_v7.c
+++ b/arch/arm/kernel/perf_event_v7.c
@@ -963,7 +963,7 @@ static irqreturn_t armv7pmu_handle_irq(int irq_num, void *dev)
 			continue;
 
 		hwc = &event->hw;
-		armpmu_event_update(event, hwc, idx, 1);
+		armpmu_event_update(event, hwc, idx);
 		data.period = event->hw.last_period;
 		if (!armpmu_event_set_period(event, hwc, idx))
 			continue;
diff --git a/arch/arm/kernel/perf_event_xscale.c b/arch/arm/kernel/perf_event_xscale.c
index 3b99d826982..831e019b017 100644
--- a/arch/arm/kernel/perf_event_xscale.c
+++ b/arch/arm/kernel/perf_event_xscale.c
@@ -259,7 +259,7 @@ xscale1pmu_handle_irq(int irq_num, void *dev)
 			continue;
 
 		hwc = &event->hw;
-		armpmu_event_update(event, hwc, idx, 1);
+		armpmu_event_update(event, hwc, idx);
 		data.period = event->hw.last_period;
 		if (!armpmu_event_set_period(event, hwc, idx))
 			continue;
@@ -596,7 +596,7 @@ xscale2pmu_handle_irq(int irq_num, void *dev)
 			continue;
 
 		hwc = &event->hw;
-		armpmu_event_update(event, hwc, idx, 1);
+		armpmu_event_update(event, hwc, idx);
 		data.period = event->hw.last_period;
 		if (!armpmu_event_set_period(event, hwc, idx))
 			continue;
-- 
cgit v1.2.3-70-g09d2


From 99c1745b9c76910e195889044f914b4898b7c9a5 Mon Sep 17 00:00:00 2001
From: Will Deacon <will.deacon@arm.com>
Date: Tue, 6 Mar 2012 17:34:22 +0100
Subject: ARM: 7355/1: perf: clear overflow flag when disabling counter on
 ARMv7 PMU

When disabling a counter on an ARMv7 PMU, we should also clear the
overflow flag in case an overflow occurred whilst stopping the counter.
This prevents a spurious overflow being picked up later and leading to
either false accounting or a NULL dereference.

Cc: <stable@vger.kernel.org>
Reported-by: Ming Lei <tom.leiming@gmail.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/kernel/perf_event_v7.c | 5 +++++
 1 file changed, 5 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/kernel/perf_event_v7.c b/arch/arm/kernel/perf_event_v7.c
index 6f488610f8f..050cc8bf724 100644
--- a/arch/arm/kernel/perf_event_v7.c
+++ b/arch/arm/kernel/perf_event_v7.c
@@ -809,6 +809,11 @@ static inline int armv7_pmnc_disable_intens(int idx)
 
 	counter = ARMV7_IDX_TO_COUNTER(idx);
 	asm volatile("mcr p15, 0, %0, c9, c14, 2" : : "r" (BIT(counter)));
+	isb();
+	/* Clear the overflow flag in case an interrupt is pending. */
+	asm volatile("mcr p15, 0, %0, c9, c12, 3" : : "r" (BIT(counter)));
+	isb();
+
 	return idx;
 }
 
-- 
cgit v1.2.3-70-g09d2


From f6f5a30c834135c9f2fa10400c59ebbdd9188567 Mon Sep 17 00:00:00 2001
From: Will Deacon <will.deacon@arm.com>
Date: Tue, 6 Mar 2012 17:34:50 +0100
Subject: ARM: 7356/1: perf: check that we have an event in the PMU IRQ
 handlers

The PMU IRQ handlers in perf assume that if a counter has overflowed
then perf must be responsible. In the paranoid world of crazy hardware,
this could be false, so check that we do have a valid event before
attempting to dereference NULL in the interrupt path.

Cc: <stable@vger.kernel.org>
Signed-off-by: Ming Lei <tom.leiming@gmail.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/kernel/perf_event_v6.c     | 20 ++------------------
 arch/arm/kernel/perf_event_v7.c     |  4 ++++
 arch/arm/kernel/perf_event_xscale.c |  6 ++++++
 3 files changed, 12 insertions(+), 18 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/kernel/perf_event_v6.c b/arch/arm/kernel/perf_event_v6.c
index 88bf15253fb..b78af0cc6ef 100644
--- a/arch/arm/kernel/perf_event_v6.c
+++ b/arch/arm/kernel/perf_event_v6.c
@@ -467,23 +467,6 @@ armv6pmu_enable_event(struct hw_perf_event *hwc,
 	raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
 }
 
-static int counter_is_active(unsigned long pmcr, int idx)
-{
-	unsigned long mask = 0;
-	if (idx == ARMV6_CYCLE_COUNTER)
-		mask = ARMV6_PMCR_CCOUNT_IEN;
-	else if (idx == ARMV6_COUNTER0)
-		mask = ARMV6_PMCR_COUNT0_IEN;
-	else if (idx == ARMV6_COUNTER1)
-		mask = ARMV6_PMCR_COUNT1_IEN;
-
-	if (mask)
-		return pmcr & mask;
-
-	WARN_ONCE(1, "invalid counter number (%d)\n", idx);
-	return 0;
-}
-
 static irqreturn_t
 armv6pmu_handle_irq(int irq_num,
 		    void *dev)
@@ -513,7 +496,8 @@ armv6pmu_handle_irq(int irq_num,
 		struct perf_event *event = cpuc->events[idx];
 		struct hw_perf_event *hwc;
 
-		if (!counter_is_active(pmcr, idx))
+		/* Ignore if we don't have an event. */
+		if (!event)
 			continue;
 
 		/*
diff --git a/arch/arm/kernel/perf_event_v7.c b/arch/arm/kernel/perf_event_v7.c
index 050cc8bf724..4d7095af2ab 100644
--- a/arch/arm/kernel/perf_event_v7.c
+++ b/arch/arm/kernel/perf_event_v7.c
@@ -960,6 +960,10 @@ static irqreturn_t armv7pmu_handle_irq(int irq_num, void *dev)
 		struct perf_event *event = cpuc->events[idx];
 		struct hw_perf_event *hwc;
 
+		/* Ignore if we don't have an event. */
+		if (!event)
+			continue;
+
 		/*
 		 * We have a single interrupt for all counters. Check that
 		 * each counter has overflowed before we process it.
diff --git a/arch/arm/kernel/perf_event_xscale.c b/arch/arm/kernel/perf_event_xscale.c
index 831e019b017..a5bbd360cc4 100644
--- a/arch/arm/kernel/perf_event_xscale.c
+++ b/arch/arm/kernel/perf_event_xscale.c
@@ -255,6 +255,9 @@ xscale1pmu_handle_irq(int irq_num, void *dev)
 		struct perf_event *event = cpuc->events[idx];
 		struct hw_perf_event *hwc;
 
+		if (!event)
+			continue;
+
 		if (!xscale1_pmnc_counter_has_overflowed(pmnc, idx))
 			continue;
 
@@ -592,6 +595,9 @@ xscale2pmu_handle_irq(int irq_num, void *dev)
 		struct perf_event *event = cpuc->events[idx];
 		struct hw_perf_event *hwc;
 
+		if (!event)
+			continue;
+
 		if (!xscale2_pmnc_counter_has_overflowed(pmnc, idx))
 			continue;
 
-- 
cgit v1.2.3-70-g09d2


From 3f31ae121348afd9ed39700ea2a63c17cd7eeed1 Mon Sep 17 00:00:00 2001
From: Will Deacon <will.deacon@arm.com>
Date: Tue, 6 Mar 2012 17:35:55 +0100
Subject: ARM: 7357/1: perf: fix overflow handling for xscale2 PMUs

xscale2 PMUs indicate overflow not via the PMU control register, but by
a separate overflow FLAG register instead.

This patch fixes the xscale2 PMU code to use this register to detect
to overflow and ensures that we clear any pending overflow when
disabling a counter.

Cc: <stable@vger.kernel.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/kernel/perf_event_xscale.c | 10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/kernel/perf_event_xscale.c b/arch/arm/kernel/perf_event_xscale.c
index a5bbd360cc4..71a21e6712f 100644
--- a/arch/arm/kernel/perf_event_xscale.c
+++ b/arch/arm/kernel/perf_event_xscale.c
@@ -598,7 +598,7 @@ xscale2pmu_handle_irq(int irq_num, void *dev)
 		if (!event)
 			continue;
 
-		if (!xscale2_pmnc_counter_has_overflowed(pmnc, idx))
+		if (!xscale2_pmnc_counter_has_overflowed(of_flags, idx))
 			continue;
 
 		hwc = &event->hw;
@@ -669,7 +669,7 @@ xscale2pmu_enable_event(struct hw_perf_event *hwc, int idx)
 static void
 xscale2pmu_disable_event(struct hw_perf_event *hwc, int idx)
 {
-	unsigned long flags, ien, evtsel;
+	unsigned long flags, ien, evtsel, of_flags;
 	struct pmu_hw_events *events = cpu_pmu->get_hw_events();
 
 	ien = xscale2pmu_read_int_enable();
@@ -678,26 +678,31 @@ xscale2pmu_disable_event(struct hw_perf_event *hwc, int idx)
 	switch (idx) {
 	case XSCALE_CYCLE_COUNTER:
 		ien &= ~XSCALE2_CCOUNT_INT_EN;
+		of_flags = XSCALE2_CCOUNT_OVERFLOW;
 		break;
 	case XSCALE_COUNTER0:
 		ien &= ~XSCALE2_COUNT0_INT_EN;
 		evtsel &= ~XSCALE2_COUNT0_EVT_MASK;
 		evtsel |= XSCALE_PERFCTR_UNUSED << XSCALE2_COUNT0_EVT_SHFT;
+		of_flags = XSCALE2_COUNT0_OVERFLOW;
 		break;
 	case XSCALE_COUNTER1:
 		ien &= ~XSCALE2_COUNT1_INT_EN;
 		evtsel &= ~XSCALE2_COUNT1_EVT_MASK;
 		evtsel |= XSCALE_PERFCTR_UNUSED << XSCALE2_COUNT1_EVT_SHFT;
+		of_flags = XSCALE2_COUNT1_OVERFLOW;
 		break;
 	case XSCALE_COUNTER2:
 		ien &= ~XSCALE2_COUNT2_INT_EN;
 		evtsel &= ~XSCALE2_COUNT2_EVT_MASK;
 		evtsel |= XSCALE_PERFCTR_UNUSED << XSCALE2_COUNT2_EVT_SHFT;
+		of_flags = XSCALE2_COUNT2_OVERFLOW;
 		break;
 	case XSCALE_COUNTER3:
 		ien &= ~XSCALE2_COUNT3_INT_EN;
 		evtsel &= ~XSCALE2_COUNT3_EVT_MASK;
 		evtsel |= XSCALE_PERFCTR_UNUSED << XSCALE2_COUNT3_EVT_SHFT;
+		of_flags = XSCALE2_COUNT3_OVERFLOW;
 		break;
 	default:
 		WARN_ONCE(1, "invalid counter number (%d)\n", idx);
@@ -707,6 +712,7 @@ xscale2pmu_disable_event(struct hw_perf_event *hwc, int idx)
 	raw_spin_lock_irqsave(&events->pmu_lock, flags);
 	xscale2pmu_write_event_select(evtsel);
 	xscale2pmu_write_int_enable(ien);
+	xscale2pmu_write_overflow_flags(of_flags);
 	raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
 }
 
-- 
cgit v1.2.3-70-g09d2


From a0feb6db0fe03326d7d2c7a4615ce3289615c023 Mon Sep 17 00:00:00 2001
From: Lorenzo Pieralisi <Lorenzo.Pieralisi@arm.com>
Date: Tue, 6 Mar 2012 17:37:45 +0100
Subject: ARM: 7358/1: perf: add PMU hotplug notifier

When a CPU is taken out of reset, either cold booted or hotplugged in,
some of its PMU registers can contain UNKNOWN values.

This patch adds a hotplug notifier to ARM core perf code so that upon
CPU restart the PMU unit is reset and becomes ready to use again.

Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/kernel/perf_event.c | 23 +++++++++++++++++++++++
 1 file changed, 23 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/kernel/perf_event.c b/arch/arm/kernel/perf_event.c
index 56173ae1644..b2abfa18f13 100644
--- a/arch/arm/kernel/perf_event.c
+++ b/arch/arm/kernel/perf_event.c
@@ -679,6 +679,28 @@ static void __init cpu_pmu_init(struct arm_pmu *armpmu)
 	armpmu->type = ARM_PMU_DEVICE_CPU;
 }
 
+/*
+ * PMU hardware loses all context when a CPU goes offline.
+ * When a CPU is hotplugged back in, since some hardware registers are
+ * UNKNOWN at reset, the PMU must be explicitly reset to avoid reading
+ * junk values out of them.
+ */
+static int __cpuinit pmu_cpu_notify(struct notifier_block *b,
+					unsigned long action, void *hcpu)
+{
+	if ((action & ~CPU_TASKS_FROZEN) != CPU_STARTING)
+		return NOTIFY_DONE;
+
+	if (cpu_pmu && cpu_pmu->reset)
+		cpu_pmu->reset(NULL);
+
+	return NOTIFY_OK;
+}
+
+static struct notifier_block __cpuinitdata pmu_cpu_notifier = {
+	.notifier_call = pmu_cpu_notify,
+};
+
 /*
  * CPU PMU identification and registration.
  */
@@ -730,6 +752,7 @@ init_hw_perf_events(void)
 		pr_info("enabled with %s PMU driver, %d counters available\n",
 			cpu_pmu->name, cpu_pmu->num_events);
 		cpu_pmu_init(cpu_pmu);
+		register_cpu_notifier(&pmu_cpu_notifier);
 		armpmu_register(cpu_pmu, "cpu", PERF_TYPE_RAW);
 	} else {
 		pr_info("no hardware support available\n");
-- 
cgit v1.2.3-70-g09d2


From 4cd7c0a03ea44ef88fa0d3901d671798d23cbc35 Mon Sep 17 00:00:00 2001
From: Mark Salter <msalter@redhat.com>
Date: Wed, 7 Mar 2012 11:19:31 -0500
Subject: C6X: fix KSTK_EIP and KSTK_ESP macros

There was a latent typo in the C6X KSTK_EIP and KSTK_ESP macros which
caused a problem with a new patch which used them. The broken definitions
were of the form:

  #define KSTK_FOO(tsk) (task_pt_regs(task)->foo)

Note the use of task vs tsk. This actually worked before because the
only place in the kernel which used these macros passed in a local
pointer named task.

Signed-off-by: Mark Salter <msalter@redhat.com>
---
 arch/c6x/include/asm/processor.h | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/c6x/include/asm/processor.h b/arch/c6x/include/asm/processor.h
index 8154c4ee8c9..77ecbded1f3 100644
--- a/arch/c6x/include/asm/processor.h
+++ b/arch/c6x/include/asm/processor.h
@@ -122,8 +122,8 @@ extern int kernel_thread(int (*fn)(void *), void * arg, unsigned long flags);
 
 extern unsigned long get_wchan(struct task_struct *p);
 
-#define KSTK_EIP(tsk)	(task_pt_regs(task)->pc)
-#define	KSTK_ESP(tsk)	(task_pt_regs(task)->sp)
+#define KSTK_EIP(task)	(task_pt_regs(task)->pc)
+#define KSTK_ESP(task)	(task_pt_regs(task)->sp)
 
 #define cpu_relax()		do { } while (0)
 
-- 
cgit v1.2.3-70-g09d2


From 48546cc0a5c2deac67c9a3cafa3889871b25a4c0 Mon Sep 17 00:00:00 2001
From: Kukjin Kim <kgene.kim@samsung.com>
Date: Thu, 8 Mar 2012 01:48:36 -0800
Subject: ARM: S3C2440: Fixed build error for s3c244x

Fixed following:
arch/arm/mach-s3c2440/s3c244x.c: In function 's3c244x_restart':
arch/arm/mach-s3c2440/s3c244x.c:209: error: expected declaration or statement at end of input
make[1]: *** [arch/arm/mach-s3c24xx/s3c244x.o] Error 1
make: *** [arch/arm/mach-s3c24xx] Error 2

Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
---
 arch/arm/mach-s3c2440/s3c244x.c | 1 +
 1 file changed, 1 insertion(+)

(limited to 'arch')

diff --git a/arch/arm/mach-s3c2440/s3c244x.c b/arch/arm/mach-s3c2440/s3c244x.c
index 744930a870e..d15852f642b 100644
--- a/arch/arm/mach-s3c2440/s3c244x.c
+++ b/arch/arm/mach-s3c2440/s3c244x.c
@@ -207,3 +207,4 @@ void s3c244x_restart(char mode, const char *cmd)
 
 	/* we'll take a jump through zero as a poor second */
 	soft_restart(0);
+}
-- 
cgit v1.2.3-70-g09d2


From a7f4255f906f60f72e00aad2fb000939449ff32e Mon Sep 17 00:00:00 2001
From: Thomas Gleixner <tglx@linutronix.de>
Date: Fri, 9 Mar 2012 20:55:10 +0100
Subject: x86: Derandom delay_tsc for 64 bit

Commit f0fbf0abc093 ("x86: integrate delay functions") converted
delay_tsc() into a random delay generator for 64 bit.  The reason is
that it merged the mostly identical versions of delay_32.c and
delay_64.c.  Though the subtle difference of the result was:

 static void delay_tsc(unsigned long loops)
 {
-	unsigned bclock, now;
+	unsigned long bclock, now;

Now the function uses rdtscl() which returns the lower 32bit of the
TSC. On 32bit that's not problematic as unsigned long is 32bit. On 64
bit this fails when the lower 32bit are close to wrap around when
bclock is read, because the following check

       if ((now - bclock) >= loops)
       	  	break;

evaluated to true on 64bit for e.g. bclock = 0xffffffff and now = 0
because the unsigned long (now - bclock) of these values results in
0xffffffff00000001 which is definitely larger than the loops
value. That explains Tvortkos observation:

"Because I am seeing udelay(500) (_occasionally_) being short, and
 that by delaying for some duration between 0us (yep) and 491us."

Make those variables explicitely u32 again, so this works for both 32
and 64 bit.

Reported-by: Tvrtko Ursulin <tvrtko.ursulin@onelan.co.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org # >= 2.6.27
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/x86/lib/delay.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/lib/delay.c b/arch/x86/lib/delay.c
index fc45ba887d0..e395693abdb 100644
--- a/arch/x86/lib/delay.c
+++ b/arch/x86/lib/delay.c
@@ -48,9 +48,9 @@ static void delay_loop(unsigned long loops)
 }
 
 /* TSC based delay: */
-static void delay_tsc(unsigned long loops)
+static void delay_tsc(unsigned long __loops)
 {
-	unsigned long bclock, now;
+	u32 bclock, now, loops = __loops;
 	int cpu;
 
 	preempt_disable();
-- 
cgit v1.2.3-70-g09d2