From 7358e51082b68e2026628220510a29197e2b9933 Mon Sep 17 00:00:00 2001 From: Kautuk Consul Date: Mon, 26 Mar 2012 06:40:49 +0000 Subject: sparc/mm/fault_64.c: Port OOM changes to do_sparc64_fault Commit d065bd810b6deb67d4897a14bfe21f8eb526ba99 (mm: retry page fault when blocking on disk transfer) and commit 37b23e0525d393d48a7d59f870b3bc061a30ccdb (x86,mm: make pagefault killable) The above commits introduced changes into the x86 pagefault handler for making the page fault handler retryable as well as killable. These changes reduce the mmap_sem hold time, which is crucial during OOM killer invocation. Port these changes to 64-bit sparc. Signed-off-by: Kautuk Consul Signed-off-by: David S. Miller --- arch/sparc/mm/fault_64.c | 37 ++++++++++++++++++++++++++++++------- 1 file changed, 30 insertions(+), 7 deletions(-) (limited to 'arch') diff --git a/arch/sparc/mm/fault_64.c b/arch/sparc/mm/fault_64.c index 504c0622f72..1fe0429b631 100644 --- a/arch/sparc/mm/fault_64.c +++ b/arch/sparc/mm/fault_64.c @@ -279,6 +279,7 @@ asmlinkage void __kprobes do_sparc64_fault(struct pt_regs *regs) unsigned int insn = 0; int si_code, fault_code, fault; unsigned long address, mm_rss; + unsigned int flags = FAULT_FLAG_ALLOW_RETRY | FAULT_FLAG_KILLABLE; fault_code = get_thread_fault_code(); @@ -333,6 +334,8 @@ asmlinkage void __kprobes do_sparc64_fault(struct pt_regs *regs) insn = get_fault_insn(regs, insn); goto handle_kernel_fault; } + +retry: down_read(&mm->mmap_sem); } @@ -423,7 +426,12 @@ good_area: goto bad_area; } - fault = handle_mm_fault(mm, vma, address, (fault_code & FAULT_CODE_WRITE) ? FAULT_FLAG_WRITE : 0); + flags |= ((fault_code & FAULT_CODE_WRITE) ? FAULT_FLAG_WRITE : 0); + fault = handle_mm_fault(mm, vma, address, flags); + + if ((fault & VM_FAULT_RETRY) && fatal_signal_pending(current)) + return; + if (unlikely(fault & VM_FAULT_ERROR)) { if (fault & VM_FAULT_OOM) goto out_of_memory; @@ -431,12 +439,27 @@ good_area: goto do_sigbus; BUG(); } - if (fault & VM_FAULT_MAJOR) { - current->maj_flt++; - perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS_MAJ, 1, regs, address); - } else { - current->min_flt++; - perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS_MIN, 1, regs, address); + + if (flags & FAULT_FLAG_ALLOW_RETRY) { + if (fault & VM_FAULT_MAJOR) { + current->maj_flt++; + perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS_MAJ, + 1, regs, address); + } else { + current->min_flt++; + perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS_MIN, + 1, regs, address); + } + if (fault & VM_FAULT_RETRY) { + flags &= ~FAULT_FLAG_ALLOW_RETRY; + + /* No need to up_read(&mm->mmap_sem) as we would + * have already released it in __lock_page_or_retry + * in mm/filemap.c. + */ + + goto retry; + } } up_read(&mm->mmap_sem); -- cgit v1.2.3-70-g09d2 From c29554f53e4679d30f4eb39cad7700023cbaae67 Mon Sep 17 00:00:00 2001 From: Kautuk Consul Date: Mon, 26 Mar 2012 06:47:54 +0000 Subject: sparc/mm/fault_32.c: Port OOM changes to do_sparc_fault Commit d065bd810b6deb67d4897a14bfe21f8eb526ba99 (mm: retry page fault when blocking on disk transfer) and commit 37b23e0525d393d48a7d59f870b3bc061a30ccdb (x86,mm: make pagefault killable) The above commits introduced changes into the x86 pagefault handler for making the page fault handler retryable as well as killable. These changes reduce the mmap_sem hold time, which is crucial during OOM killer invocation. Port these changes to 32-bit sparc. Signed-off-by: Kautuk Consul Signed-off-by: David S. Miller --- arch/sparc/mm/fault_32.c | 37 ++++++++++++++++++++++++++++++------- 1 file changed, 30 insertions(+), 7 deletions(-) (limited to 'arch') diff --git a/arch/sparc/mm/fault_32.c b/arch/sparc/mm/fault_32.c index 7705c6731e2..df3155a1799 100644 --- a/arch/sparc/mm/fault_32.c +++ b/arch/sparc/mm/fault_32.c @@ -225,6 +225,8 @@ asmlinkage void do_sparc_fault(struct pt_regs *regs, int text_fault, int write, unsigned long g2; int from_user = !(regs->psr & PSR_PS); int fault, code; + unsigned int flags = (FAULT_FLAG_ALLOW_RETRY | FAULT_FLAG_KILLABLE | + (write ? FAULT_FLAG_WRITE : 0)); if(text_fault) address = regs->pc; @@ -251,6 +253,7 @@ asmlinkage void do_sparc_fault(struct pt_regs *regs, int text_fault, int write, perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS, 1, regs, address); +retry: down_read(&mm->mmap_sem); /* @@ -289,7 +292,11 @@ good_area: * make sure we exit gracefully rather than endlessly redo * the fault. */ - fault = handle_mm_fault(mm, vma, address, write ? FAULT_FLAG_WRITE : 0); + fault = handle_mm_fault(mm, vma, address, flags); + + if ((fault & VM_FAULT_RETRY) && fatal_signal_pending(current)) + return; + if (unlikely(fault & VM_FAULT_ERROR)) { if (fault & VM_FAULT_OOM) goto out_of_memory; @@ -297,13 +304,29 @@ good_area: goto do_sigbus; BUG(); } - if (fault & VM_FAULT_MAJOR) { - current->maj_flt++; - perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS_MAJ, 1, regs, address); - } else { - current->min_flt++; - perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS_MIN, 1, regs, address); + + if (flags & FAULT_FLAG_ALLOW_RETRY) { + if (fault & VM_FAULT_MAJOR) { + current->maj_flt++; + perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS_MAJ, + 1, regs, address); + } else { + current->min_flt++; + perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS_MIN, + 1, regs, address); + } + if (fault & VM_FAULT_RETRY) { + flags &= ~FAULT_FLAG_ALLOW_RETRY; + + /* No need to up_read(&mm->mmap_sem) as we would + * have already released it in __lock_page_or_retry + * in mm/filemap.c. + */ + + goto retry; + } } + up_read(&mm->mmap_sem); return; -- cgit v1.2.3-70-g09d2 From d657784b70ef653350d7aa49da90a8484c29da7d Mon Sep 17 00:00:00 2001 From: Sam Ravnborg Date: Wed, 4 Apr 2012 21:20:01 +0200 Subject: sparc32,leon: fix leon build Minimal fix to allow leon to be built. Signed-off-by: Sam Ravnborg Cc: Konrad Eisele Cc: Daniel Hellstrom Signed-off-by: David S. Miller --- arch/sparc/kernel/leon_pci.c | 13 ------------- 1 file changed, 13 deletions(-) (limited to 'arch') diff --git a/arch/sparc/kernel/leon_pci.c b/arch/sparc/kernel/leon_pci.c index aba6b958b2a..19f56058742 100644 --- a/arch/sparc/kernel/leon_pci.c +++ b/arch/sparc/kernel/leon_pci.c @@ -45,7 +45,6 @@ void leon_pci_init(struct platform_device *ofdev, struct leon_pci_info *info) void __devinit pcibios_fixup_bus(struct pci_bus *pbus) { - struct leon_pci_info *info = pbus->sysdata; struct pci_dev *dev; int i, has_io, has_mem; u16 cmd; @@ -111,18 +110,6 @@ int pcibios_enable_device(struct pci_dev *dev, int mask) return pci_enable_resources(dev, mask); } -struct device_node *pci_device_to_OF_node(struct pci_dev *pdev) -{ - /* - * Currently the OpenBoot nodes are not connected with the PCI device, - * this is because the LEON PROM does not create PCI nodes. Eventually - * this will change and the same approach as pcic.c can be used to - * match PROM nodes with pci devices. - */ - return NULL; -} -EXPORT_SYMBOL(pci_device_to_OF_node); - void __devinit pcibios_update_irq(struct pci_dev *dev, int irq) { #ifdef CONFIG_PCI_DEBUG -- cgit v1.2.3-70-g09d2 From 46ed99d1b7c92920ce9e313152522847647aae4f Mon Sep 17 00:00:00 2001 From: Emil Goode Date: Sun, 1 Apr 2012 20:48:04 +0200 Subject: x86: vsyscall: Use NULL instead 0 for a pointer argument This patch silences the following sparse warning: arch/x86/kernel/vsyscall_64.c:250:34: warning: Using plain integer as NULL pointer Signed-off-by: Emil Goode Acked-by: Andy Lutomirski Cc: john.stultz@linaro.org Link: http://lkml.kernel.org/r/1333306084-3776-1-git-send-email-emilgoode@gmail.com Signed-off-by: Thomas Gleixner --- arch/x86/kernel/vsyscall_64.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/vsyscall_64.c b/arch/x86/kernel/vsyscall_64.c index f386dc49f98..7515cf0e180 100644 --- a/arch/x86/kernel/vsyscall_64.c +++ b/arch/x86/kernel/vsyscall_64.c @@ -216,9 +216,9 @@ bool emulate_vsyscall(struct pt_regs *regs, unsigned long address) current_thread_info()->sig_on_uaccess_error = 1; /* - * 0 is a valid user pointer (in the access_ok sense) on 32-bit and + * NULL is a valid user pointer (in the access_ok sense) on 32-bit and * 64-bit, so we don't need to special-case it here. For all the - * vsyscalls, 0 means "don't write anything" not "write it at + * vsyscalls, NULL means "don't write anything" not "write it at * address 0". */ ret = -EFAULT; @@ -247,7 +247,7 @@ bool emulate_vsyscall(struct pt_regs *regs, unsigned long address) ret = sys_getcpu((unsigned __user *)regs->di, (unsigned __user *)regs->si, - 0); + NULL); break; } -- cgit v1.2.3-70-g09d2 From 2ca052a3710fac208eee690faefdeb8bbd4586a1 Mon Sep 17 00:00:00 2001 From: Jeremy Fitzhardinge Date: Mon, 2 Apr 2012 16:15:33 -0700 Subject: x86: Use correct byte-sized register constraint in __xchg_op() x86-64 can access the low half of any register, but i386 can only do it with a subset of registers. 'r' causes compilation failures on i386, but 'q' expresses the constraint properly. Signed-off-by: Jeremy Fitzhardinge Link: http://lkml.kernel.org/r/4F7A3315.501@goop.org Reported-by: Leigh Scott Tested-by: Thomas Reitmayr Signed-off-by: H. Peter Anvin Cc: v3.3 --- arch/x86/include/asm/cmpxchg.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/x86/include/asm/cmpxchg.h b/arch/x86/include/asm/cmpxchg.h index b3b73326290..bc18d0ed459 100644 --- a/arch/x86/include/asm/cmpxchg.h +++ b/arch/x86/include/asm/cmpxchg.h @@ -43,7 +43,7 @@ extern void __add_wrong_size(void) switch (sizeof(*(ptr))) { \ case __X86_CASE_B: \ asm volatile (lock #op "b %b0, %1\n" \ - : "+r" (__ret), "+m" (*(ptr)) \ + : "+q" (__ret), "+m" (*(ptr)) \ : : "memory", "cc"); \ break; \ case __X86_CASE_W: \ -- cgit v1.2.3-70-g09d2 From 8c91c5325e107ec17e40a59a47c6517387d64eb7 Mon Sep 17 00:00:00 2001 From: "H. Peter Anvin" Date: Fri, 6 Apr 2012 09:30:57 -0700 Subject: x86: Use correct byte-sized register constraint in __add() Similar to: 2ca052a x86: Use correct byte-sized register constraint in __xchg_op() ... the __add() macro also needs to use a "q" constraint in the byte-sized case, lest we try to generate an illegal register. Link: http://lkml.kernel.org/r/4F7A3315.501@goop.org Signed-off-by: H. Peter Anvin Cc: Jeremy Fitzhardinge Cc: Leigh Scott Cc: Thomas Reitmayr Cc: v3.3 --- arch/x86/include/asm/cmpxchg.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/x86/include/asm/cmpxchg.h b/arch/x86/include/asm/cmpxchg.h index bc18d0ed459..99480e55973 100644 --- a/arch/x86/include/asm/cmpxchg.h +++ b/arch/x86/include/asm/cmpxchg.h @@ -173,7 +173,7 @@ extern void __add_wrong_size(void) switch (sizeof(*(ptr))) { \ case __X86_CASE_B: \ asm volatile (lock "addb %b1, %0\n" \ - : "+m" (*(ptr)) : "ri" (inc) \ + : "+m" (*(ptr)) : "qi" (inc) \ : "memory", "cc"); \ break; \ case __X86_CASE_W: \ -- cgit v1.2.3-70-g09d2 From 70499329202a68f7485415e009e04213672f6811 Mon Sep 17 00:00:00 2001 From: Kukjin Kim Date: Thu, 5 Apr 2012 15:48:25 -0700 Subject: ARM: S5PV210: fix unused LDO supply field from wm8994_pdata According to commit 719a4240("mfd: Remove unused LDO supply field from WM8994 pdata"), the LDO supply field should be removed from the initializer. Cc: Mark Brown Signed-off-by: Kukjin Kim --- arch/arm/mach-s5pv210/mach-aquila.c | 4 ++-- arch/arm/mach-s5pv210/mach-goni.c | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-s5pv210/mach-aquila.c b/arch/arm/mach-s5pv210/mach-aquila.c index a9ea64e0da0..48d018f2332 100644 --- a/arch/arm/mach-s5pv210/mach-aquila.c +++ b/arch/arm/mach-s5pv210/mach-aquila.c @@ -484,8 +484,8 @@ static struct wm8994_pdata wm8994_platform_data = { .gpio_defaults[8] = 0x0100, .gpio_defaults[9] = 0x0100, .gpio_defaults[10] = 0x0100, - .ldo[0] = { S5PV210_MP03(6), NULL, &wm8994_ldo1_data }, /* XM0FRNB_2 */ - .ldo[1] = { 0, NULL, &wm8994_ldo2_data }, + .ldo[0] = { S5PV210_MP03(6), &wm8994_ldo1_data }, /* XM0FRNB_2 */ + .ldo[1] = { 0, &wm8994_ldo2_data }, }; /* GPIO I2C PMIC */ diff --git a/arch/arm/mach-s5pv210/mach-goni.c b/arch/arm/mach-s5pv210/mach-goni.c index 2cf5ed75f39..a8933de3d62 100644 --- a/arch/arm/mach-s5pv210/mach-goni.c +++ b/arch/arm/mach-s5pv210/mach-goni.c @@ -674,8 +674,8 @@ static struct wm8994_pdata wm8994_platform_data = { .gpio_defaults[8] = 0x0100, .gpio_defaults[9] = 0x0100, .gpio_defaults[10] = 0x0100, - .ldo[0] = { S5PV210_MP03(6), NULL, &wm8994_ldo1_data }, /* XM0FRNB_2 */ - .ldo[1] = { 0, NULL, &wm8994_ldo2_data }, + .ldo[0] = { S5PV210_MP03(6), &wm8994_ldo1_data }, /* XM0FRNB_2 */ + .ldo[1] = { 0, &wm8994_ldo2_data }, }; /* GPIO I2C PMIC */ -- cgit v1.2.3-70-g09d2 From 0d923490f7dd5d96bc894a09a178117442b8795b Mon Sep 17 00:00:00 2001 From: Tushar Behera Date: Thu, 5 Apr 2012 16:08:25 -0700 Subject: ARM: EXYNOS: Add missing definition for IRQ_I2S0 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This fixes following build error when sound support is selected on EXYNOS4 platform. sound/soc/samsung/idma.c: In function ‘idma_close’: sound/soc/samsung/idma.c:327:11: error: ‘IRQ_I2S0’ undeclared (first use in this function) Signed-off-by: Tushar Behera Signed-off-by: Kukjin Kim --- arch/arm/mach-exynos/include/mach/irqs.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-exynos/include/mach/irqs.h b/arch/arm/mach-exynos/include/mach/irqs.h index 9bee8535d9e..591e78521a9 100644 --- a/arch/arm/mach-exynos/include/mach/irqs.h +++ b/arch/arm/mach-exynos/include/mach/irqs.h @@ -212,6 +212,8 @@ #define IRQ_MFC EXYNOS4_IRQ_MFC #define IRQ_SDO EXYNOS4_IRQ_SDO +#define IRQ_I2S0 EXYNOS4_IRQ_I2S0 + #define IRQ_ADC EXYNOS4_IRQ_ADC0 #define IRQ_TC EXYNOS4_IRQ_PEN0 -- cgit v1.2.3-70-g09d2 From 32db797f10d465365a52d269c0b313b6b702e711 Mon Sep 17 00:00:00 2001 From: Jonghwan Choi Date: Thu, 5 Apr 2012 22:31:31 -0700 Subject: ARM: EXYNOS: Fix compile error in exynos5250-cpufreq.c This patch is omitted in v2 patch of Jaecheol Lee. drivers/cpufreq/exynos5250-cpufreq.c: In function 'set_clkdiv': drivers/cpufreq/exynos5250-cpufreq.c:144: error: 'EXYNOS5_CLKDIV_STATCPU0' undeclared (first use in this function) drivers/cpufreq/exynos5250-cpufreq.c:144: error: (Each undeclared identifier is reported only once drivers/cpufreq/exynos5250-cpufreq.c:144: error: for each function it appears in.) drivers/cpufreq/exynos5250-cpufreq.c:150: error: 'EXYNOS5_CLKDIV_CPU1' undeclared (first use in this function) drivers/cpufreq/exynos5250-cpufreq.c:152: error: 'EXYNOS5_CLKDIV_STATCPU1' undeclared (first use in this function) drivers/cpufreq/exynos5250-cpufreq.c: In function 'set_apll': drivers/cpufreq/exynos5250-cpufreq.c:166: error: 'EXYNOS5_CLKMUX_STATCPU' undeclared (first use in this function) drivers/cpufreq/exynos5250-cpufreq.c:173: error: 'EXYNOS5_APLL_LOCK' undeclared (first use in this function) drivers/cpufreq/exynos5250-cpufreq.c: In function 'exynos5250_cpufreq_init': drivers/cpufreq/exynos5250-cpufreq.c:312: error: 'EXYNOS5_CLKDIV_CPU1' undeclared (first use in this function) Cc: Jaecheol Lee Signed-off-by: Jonghwan Choi Signed-off-by: Kukjin Kim --- arch/arm/mach-exynos/include/mach/regs-clock.h | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-exynos/include/mach/regs-clock.h b/arch/arm/mach-exynos/include/mach/regs-clock.h index e141c1fd68d..d9578a58ae7 100644 --- a/arch/arm/mach-exynos/include/mach/regs-clock.h +++ b/arch/arm/mach-exynos/include/mach/regs-clock.h @@ -255,9 +255,15 @@ /* For EXYNOS5250 */ +#define EXYNOS5_APLL_LOCK EXYNOS_CLKREG(0x00000) #define EXYNOS5_APLL_CON0 EXYNOS_CLKREG(0x00100) #define EXYNOS5_CLKSRC_CPU EXYNOS_CLKREG(0x00200) +#define EXYNOS5_CLKMUX_STATCPU EXYNOS_CLKREG(0x00400) #define EXYNOS5_CLKDIV_CPU0 EXYNOS_CLKREG(0x00500) +#define EXYNOS5_CLKDIV_CPU1 EXYNOS_CLKREG(0x00504) +#define EXYNOS5_CLKDIV_STATCPU0 EXYNOS_CLKREG(0x00600) +#define EXYNOS5_CLKDIV_STATCPU1 EXYNOS_CLKREG(0x00604) + #define EXYNOS5_MPLL_CON0 EXYNOS_CLKREG(0x04100) #define EXYNOS5_CLKSRC_CORE1 EXYNOS_CLKREG(0x04204) -- cgit v1.2.3-70-g09d2 From 3cb42092ff02edec34bf936b7400b1f1efc8ca43 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Mon, 9 Apr 2012 13:59:00 -0400 Subject: um: fix linker script generation while we can't just use -U$(SUBARCH), we still need to kill idiotic define (implicit -Di386=1), both for SUBARCH=i386 and SUBARCH=x86/CONFIG_64BIT=n builds. Signed-off-by: Al Viro --- arch/um/kernel/Makefile | 7 ++++--- arch/x86/Makefile.um | 3 +++ 2 files changed, 7 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/um/kernel/Makefile b/arch/um/kernel/Makefile index 492bc4c1b62..65a1c3d690e 100644 --- a/arch/um/kernel/Makefile +++ b/arch/um/kernel/Makefile @@ -3,9 +3,10 @@ # Licensed under the GPL # -CPPFLAGS_vmlinux.lds := -DSTART=$(LDS_START) \ - -DELF_ARCH=$(LDS_ELF_ARCH) \ - -DELF_FORMAT=$(LDS_ELF_FORMAT) +CPPFLAGS_vmlinux.lds := -DSTART=$(LDS_START) \ + -DELF_ARCH=$(LDS_ELF_ARCH) \ + -DELF_FORMAT=$(LDS_ELF_FORMAT) \ + $(LDS_EXTRA) extra-y := vmlinux.lds clean-files := diff --git a/arch/x86/Makefile.um b/arch/x86/Makefile.um index 4be406abeef..36b62bc5263 100644 --- a/arch/x86/Makefile.um +++ b/arch/x86/Makefile.um @@ -14,6 +14,9 @@ LINK-y += $(call cc-option,-m32) export LDFLAGS +LDS_EXTRA := -Ui386 +export LDS_EXTRA + # First of all, tune CFLAGS for the specific CPU. This actually sets cflags-y. include $(srctree)/arch/x86/Makefile_32.cpu -- cgit v1.2.3-70-g09d2 From d1640130cda146ed925f12434bfe579ee7d80a1c Mon Sep 17 00:00:00 2001 From: "Srivatsa S. Bhat" Date: Thu, 22 Mar 2012 16:59:11 +0530 Subject: tile/CPU hotplug: Add missing call to notify_cpu_starting() The scheduler depends on receiving the CPU_STARTING notification, without which we end up into a lot of trouble. So add the missing call to notify_cpu_starting() in the bringup code. Signed-off-by: Srivatsa S. Bhat Signed-off-by: Chris Metcalf --- arch/tile/kernel/smpboot.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch') diff --git a/arch/tile/kernel/smpboot.c b/arch/tile/kernel/smpboot.c index b949edcec20..172aef7d315 100644 --- a/arch/tile/kernel/smpboot.c +++ b/arch/tile/kernel/smpboot.c @@ -196,6 +196,8 @@ void __cpuinit online_secondary(void) /* This must be done before setting cpu_online_mask */ wmb(); + notify_cpu_starting(smp_processor_id()); + /* * We need to hold call_lock, so there is no inconsistency * between the time smp_call_function() determines number of -- cgit v1.2.3-70-g09d2 From d824d06328904f610b47652dcd488392f2fc62b6 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Thu, 5 Apr 2012 23:35:03 -0400 Subject: um: switch cow_user.h to htobe{32,64}/betoh{32,64} ... rather than open-coding the 64bit versions. endian.h has those guys. Signed-off-by: Al Viro Signed-off-by: Richard Weinberger --- arch/um/drivers/cow.h | 35 ----------------------------------- arch/um/drivers/cow_user.c | 43 +++++++++++++++++++++---------------------- 2 files changed, 21 insertions(+), 57 deletions(-) (limited to 'arch') diff --git a/arch/um/drivers/cow.h b/arch/um/drivers/cow.h index dc36b222100..6673508f342 100644 --- a/arch/um/drivers/cow.h +++ b/arch/um/drivers/cow.h @@ -3,41 +3,6 @@ #include -#if defined(__KERNEL__) - -# include - -# if defined(__BIG_ENDIAN) -# define ntohll(x) (x) -# define htonll(x) (x) -# elif defined(__LITTLE_ENDIAN) -# define ntohll(x) be64_to_cpu(x) -# define htonll(x) cpu_to_be64(x) -# else -# error "Could not determine byte order" -# endif - -#else -/* For the definition of ntohl, htonl and __BYTE_ORDER */ -#include -#include -#if defined(__BYTE_ORDER) - -# if __BYTE_ORDER == __BIG_ENDIAN -# define ntohll(x) (x) -# define htonll(x) (x) -# elif __BYTE_ORDER == __LITTLE_ENDIAN -# define ntohll(x) bswap_64(x) -# define htonll(x) bswap_64(x) -# else -# error "Could not determine byte order: __BYTE_ORDER uncorrectly defined" -# endif - -#else /* ! defined(__BYTE_ORDER) */ -# error "Could not determine byte order: __BYTE_ORDER not defined" -#endif -#endif /* ! defined(__KERNEL__) */ - extern int init_cow_file(int fd, char *cow_file, char *backing_file, int sectorsize, int alignment, int *bitmap_offset_out, unsigned long *bitmap_len_out, int *data_offset_out); diff --git a/arch/um/drivers/cow_user.c b/arch/um/drivers/cow_user.c index 9cbb426c0b9..0ee9cc6cc4c 100644 --- a/arch/um/drivers/cow_user.c +++ b/arch/um/drivers/cow_user.c @@ -8,11 +8,10 @@ * that. */ #include -#include #include #include #include -#include +#include #include "cow.h" #include "cow_sys.h" @@ -214,8 +213,8 @@ int write_cow_header(char *cow_file, int fd, char *backing_file, "header\n"); goto out; } - header->magic = htonl(COW_MAGIC); - header->version = htonl(COW_VERSION); + header->magic = htobe32(COW_MAGIC); + header->version = htobe32(COW_VERSION); err = -EINVAL; if (strlen(backing_file) > sizeof(header->backing_file) - 1) { @@ -246,10 +245,10 @@ int write_cow_header(char *cow_file, int fd, char *backing_file, goto out_free; } - header->mtime = htonl(modtime); - header->size = htonll(*size); - header->sectorsize = htonl(sectorsize); - header->alignment = htonl(alignment); + header->mtime = htobe32(modtime); + header->size = htobe64(*size); + header->sectorsize = htobe32(sectorsize); + header->alignment = htobe32(alignment); header->cow_format = COW_BITMAP; err = cow_write_file(fd, header, sizeof(*header)); @@ -301,8 +300,8 @@ int read_cow_header(int (*reader)(__u64, char *, int, void *), void *arg, magic = header->v1.magic; if (magic == COW_MAGIC) version = header->v1.version; - else if (magic == ntohl(COW_MAGIC)) - version = ntohl(header->v1.version); + else if (magic == be32toh(COW_MAGIC)) + version = be32toh(header->v1.version); /* No error printed because the non-COW case comes through here */ else goto out; @@ -327,9 +326,9 @@ int read_cow_header(int (*reader)(__u64, char *, int, void *), void *arg, "header\n"); goto out; } - *mtime_out = ntohl(header->v2.mtime); - *size_out = ntohll(header->v2.size); - *sectorsize_out = ntohl(header->v2.sectorsize); + *mtime_out = be32toh(header->v2.mtime); + *size_out = be64toh(header->v2.size); + *sectorsize_out = be32toh(header->v2.sectorsize); *bitmap_offset_out = sizeof(header->v2); *align_out = *sectorsize_out; file = header->v2.backing_file; @@ -341,10 +340,10 @@ int read_cow_header(int (*reader)(__u64, char *, int, void *), void *arg, "header\n"); goto out; } - *mtime_out = ntohl(header->v3.mtime); - *size_out = ntohll(header->v3.size); - *sectorsize_out = ntohl(header->v3.sectorsize); - *align_out = ntohl(header->v3.alignment); + *mtime_out = be32toh(header->v3.mtime); + *size_out = be64toh(header->v3.size); + *sectorsize_out = be32toh(header->v3.sectorsize); + *align_out = be32toh(header->v3.alignment); if (*align_out == 0) { cow_printf("read_cow_header - invalid COW header, " "align == 0\n"); @@ -366,16 +365,16 @@ int read_cow_header(int (*reader)(__u64, char *, int, void *), void *arg, * this was used until Dec2005 - 64bits are needed to represent * 2038+. I.e. we can safely do this truncating cast. * - * Additionally, we must use ntohl() instead of ntohll(), since + * Additionally, we must use be32toh() instead of be64toh(), since * the program used to use the former (tested - I got mtime * mismatch "0 vs whatever"). * * Ever heard about bug-to-bug-compatibility ? ;-) */ - *mtime_out = (time32_t) ntohl(header->v3_b.mtime); + *mtime_out = (time32_t) be32toh(header->v3_b.mtime); - *size_out = ntohll(header->v3_b.size); - *sectorsize_out = ntohl(header->v3_b.sectorsize); - *align_out = ntohl(header->v3_b.alignment); + *size_out = be64toh(header->v3_b.size); + *sectorsize_out = be32toh(header->v3_b.sectorsize); + *align_out = be32toh(header->v3_b.alignment); if (*align_out == 0) { cow_printf("read_cow_header - invalid COW header, " "align == 0\n"); -- cgit v1.2.3-70-g09d2 From a3a85a763c399c0bf483a30d82d2d613e6f94cd3 Mon Sep 17 00:00:00 2001 From: Richard Weinberger Date: Thu, 29 Mar 2012 18:47:46 +0200 Subject: um: Disintegrate asm/system.h MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Richard Weinberger Reported-by: Toralf Förster CC: dhowells@redhat.com --- arch/um/drivers/mconsole_kern.c | 1 + arch/um/include/asm/Kbuild | 2 +- arch/x86/um/asm/barrier.h | 75 ++++++++++++++++++++++ arch/x86/um/asm/switch_to.h | 7 +++ arch/x86/um/asm/system.h | 135 ---------------------------------------- 5 files changed, 84 insertions(+), 136 deletions(-) create mode 100644 arch/x86/um/asm/barrier.h create mode 100644 arch/x86/um/asm/switch_to.h delete mode 100644 arch/x86/um/asm/system.h (limited to 'arch') diff --git a/arch/um/drivers/mconsole_kern.c b/arch/um/drivers/mconsole_kern.c index e672bd6d43e..43b39d61b53 100644 --- a/arch/um/drivers/mconsole_kern.c +++ b/arch/um/drivers/mconsole_kern.c @@ -22,6 +22,7 @@ #include #include #include +#include #include "init.h" #include "irq_kern.h" diff --git a/arch/um/include/asm/Kbuild b/arch/um/include/asm/Kbuild index 8419f5cf2ac..bb5d6e68829 100644 --- a/arch/um/include/asm/Kbuild +++ b/arch/um/include/asm/Kbuild @@ -1,3 +1,3 @@ generic-y += bug.h cputime.h device.h emergency-restart.h futex.h hardirq.h generic-y += hw_irq.h irq_regs.h kdebug.h percpu.h sections.h topology.h xor.h -generic-y += ftrace.h pci.h io.h param.h delay.h mutex.h current.h +generic-y += ftrace.h pci.h io.h param.h delay.h mutex.h current.h exec.h diff --git a/arch/x86/um/asm/barrier.h b/arch/x86/um/asm/barrier.h new file mode 100644 index 00000000000..7d01b8c56c0 --- /dev/null +++ b/arch/x86/um/asm/barrier.h @@ -0,0 +1,75 @@ +#ifndef _ASM_UM_BARRIER_H_ +#define _ASM_UM_BARRIER_H_ + +#include +#include +#include +#include +#include + +#include +#include + +/* + * Force strict CPU ordering. + * And yes, this is required on UP too when we're talking + * to devices. + */ +#ifdef CONFIG_X86_32 + +#define mb() alternative("lock; addl $0,0(%%esp)", "mfence", X86_FEATURE_XMM2) +#define rmb() alternative("lock; addl $0,0(%%esp)", "lfence", X86_FEATURE_XMM2) +#define wmb() alternative("lock; addl $0,0(%%esp)", "sfence", X86_FEATURE_XMM) + +#else /* CONFIG_X86_32 */ + +#define mb() asm volatile("mfence" : : : "memory") +#define rmb() asm volatile("lfence" : : : "memory") +#define wmb() asm volatile("sfence" : : : "memory") + +#endif /* CONFIG_X86_32 */ + +#define read_barrier_depends() do { } while (0) + +#ifdef CONFIG_SMP + +#define smp_mb() mb() +#ifdef CONFIG_X86_PPRO_FENCE +#define smp_rmb() rmb() +#else /* CONFIG_X86_PPRO_FENCE */ +#define smp_rmb() barrier() +#endif /* CONFIG_X86_PPRO_FENCE */ + +#ifdef CONFIG_X86_OOSTORE +#define smp_wmb() wmb() +#else /* CONFIG_X86_OOSTORE */ +#define smp_wmb() barrier() +#endif /* CONFIG_X86_OOSTORE */ + +#define smp_read_barrier_depends() read_barrier_depends() +#define set_mb(var, value) do { (void)xchg(&var, value); } while (0) + +#else /* CONFIG_SMP */ + +#define smp_mb() barrier() +#define smp_rmb() barrier() +#define smp_wmb() barrier() +#define smp_read_barrier_depends() do { } while (0) +#define set_mb(var, value) do { var = value; barrier(); } while (0) + +#endif /* CONFIG_SMP */ + +/* + * Stop RDTSC speculation. This is needed when you need to use RDTSC + * (or get_cycles or vread that possibly accesses the TSC) in a defined + * code region. + * + * (Could use an alternative three way for this if there was one.) + */ +static inline void rdtsc_barrier(void) +{ + alternative(ASM_NOP3, "mfence", X86_FEATURE_MFENCE_RDTSC); + alternative(ASM_NOP3, "lfence", X86_FEATURE_LFENCE_RDTSC); +} + +#endif diff --git a/arch/x86/um/asm/switch_to.h b/arch/x86/um/asm/switch_to.h new file mode 100644 index 00000000000..cf97d20da61 --- /dev/null +++ b/arch/x86/um/asm/switch_to.h @@ -0,0 +1,7 @@ +#ifndef _ASM_UM_SWITCH_TO_H_ +#define _ASM_UM_SWITCH_TO_H_ + +extern void *_switch_to(void *prev, void *next, void *last); +#define switch_to(prev, next, last) prev = _switch_to(prev, next, last) + +#endif diff --git a/arch/x86/um/asm/system.h b/arch/x86/um/asm/system.h deleted file mode 100644 index a459fd9b759..00000000000 --- a/arch/x86/um/asm/system.h +++ /dev/null @@ -1,135 +0,0 @@ -#ifndef _ASM_X86_SYSTEM_H_ -#define _ASM_X86_SYSTEM_H_ - -#include -#include -#include -#include -#include - -#include -#include - -/* entries in ARCH_DLINFO: */ -#ifdef CONFIG_IA32_EMULATION -# define AT_VECTOR_SIZE_ARCH 2 -#else -# define AT_VECTOR_SIZE_ARCH 1 -#endif - -extern unsigned long arch_align_stack(unsigned long sp); - -void default_idle(void); - -/* - * Force strict CPU ordering. - * And yes, this is required on UP too when we're talking - * to devices. - */ -#ifdef CONFIG_X86_32 -/* - * Some non-Intel clones support out of order store. wmb() ceases to be a - * nop for these. - */ -#define mb() alternative("lock; addl $0,0(%%esp)", "mfence", X86_FEATURE_XMM2) -#define rmb() alternative("lock; addl $0,0(%%esp)", "lfence", X86_FEATURE_XMM2) -#define wmb() alternative("lock; addl $0,0(%%esp)", "sfence", X86_FEATURE_XMM) -#else -#define mb() asm volatile("mfence":::"memory") -#define rmb() asm volatile("lfence":::"memory") -#define wmb() asm volatile("sfence" ::: "memory") -#endif - -/** - * read_barrier_depends - Flush all pending reads that subsequents reads - * depend on. - * - * No data-dependent reads from memory-like regions are ever reordered - * over this barrier. All reads preceding this primitive are guaranteed - * to access memory (but not necessarily other CPUs' caches) before any - * reads following this primitive that depend on the data return by - * any of the preceding reads. This primitive is much lighter weight than - * rmb() on most CPUs, and is never heavier weight than is - * rmb(). - * - * These ordering constraints are respected by both the local CPU - * and the compiler. - * - * Ordering is not guaranteed by anything other than these primitives, - * not even by data dependencies. See the documentation for - * memory_barrier() for examples and URLs to more information. - * - * For example, the following code would force ordering (the initial - * value of "a" is zero, "b" is one, and "p" is "&a"): - * - * - * CPU 0 CPU 1 - * - * b = 2; - * memory_barrier(); - * p = &b; q = p; - * read_barrier_depends(); - * d = *q; - * - * - * because the read of "*q" depends on the read of "p" and these - * two reads are separated by a read_barrier_depends(). However, - * the following code, with the same initial values for "a" and "b": - * - * - * CPU 0 CPU 1 - * - * a = 2; - * memory_barrier(); - * b = 3; y = b; - * read_barrier_depends(); - * x = a; - * - * - * does not enforce ordering, since there is no data dependency between - * the read of "a" and the read of "b". Therefore, on some CPUs, such - * as Alpha, "y" could be set to 3 and "x" to 0. Use rmb() - * in cases like this where there are no data dependencies. - **/ - -#define read_barrier_depends() do { } while (0) - -#ifdef CONFIG_SMP -#define smp_mb() mb() -#ifdef CONFIG_X86_PPRO_FENCE -# define smp_rmb() rmb() -#else -# define smp_rmb() barrier() -#endif -#ifdef CONFIG_X86_OOSTORE -# define smp_wmb() wmb() -#else -# define smp_wmb() barrier() -#endif -#define smp_read_barrier_depends() read_barrier_depends() -#define set_mb(var, value) do { (void)xchg(&var, value); } while (0) -#else -#define smp_mb() barrier() -#define smp_rmb() barrier() -#define smp_wmb() barrier() -#define smp_read_barrier_depends() do { } while (0) -#define set_mb(var, value) do { var = value; barrier(); } while (0) -#endif - -/* - * Stop RDTSC speculation. This is needed when you need to use RDTSC - * (or get_cycles or vread that possibly accesses the TSC) in a defined - * code region. - * - * (Could use an alternative three way for this if there was one.) - */ -static inline void rdtsc_barrier(void) -{ - alternative(ASM_NOP3, "mfence", X86_FEATURE_MFENCE_RDTSC); - alternative(ASM_NOP3, "lfence", X86_FEATURE_LFENCE_RDTSC); -} - -extern void *_switch_to(void *prev, void *next, void *last); -#define switch_to(prev, next, last) prev = _switch_to(prev, next, last) - -#endif -- cgit v1.2.3-70-g09d2 From 76b278edd99fb55525fcf2706095e388bd3d122c Mon Sep 17 00:00:00 2001 From: Richard Weinberger Date: Thu, 29 Mar 2012 19:10:42 +0200 Subject: um: Use asm-generic/switch_to.h Signed-off-by: Richard Weinberger --- arch/um/include/asm/Kbuild | 1 + arch/um/kernel/process.c | 6 +----- arch/x86/um/asm/switch_to.h | 7 ------- 3 files changed, 2 insertions(+), 12 deletions(-) delete mode 100644 arch/x86/um/asm/switch_to.h (limited to 'arch') diff --git a/arch/um/include/asm/Kbuild b/arch/um/include/asm/Kbuild index bb5d6e68829..fff24352255 100644 --- a/arch/um/include/asm/Kbuild +++ b/arch/um/include/asm/Kbuild @@ -1,3 +1,4 @@ generic-y += bug.h cputime.h device.h emergency-restart.h futex.h hardirq.h generic-y += hw_irq.h irq_regs.h kdebug.h percpu.h sections.h topology.h xor.h generic-y += ftrace.h pci.h io.h param.h delay.h mutex.h current.h exec.h +generic-y += switch_to.h diff --git a/arch/um/kernel/process.c b/arch/um/kernel/process.c index f386d04a84a..2b73dedb44c 100644 --- a/arch/um/kernel/process.c +++ b/arch/um/kernel/process.c @@ -88,11 +88,8 @@ static inline void set_current(struct task_struct *task) extern void arch_switch_to(struct task_struct *to); -void *_switch_to(void *prev, void *next, void *last) +void *__switch_to(struct task_struct *from, struct task_struct *to) { - struct task_struct *from = prev; - struct task_struct *to = next; - to->thread.prev_sched = from; set_current(to); @@ -111,7 +108,6 @@ void *_switch_to(void *prev, void *next, void *last) } while (current->thread.saved_task); return current->thread.prev_sched; - } void interrupt_end(void) diff --git a/arch/x86/um/asm/switch_to.h b/arch/x86/um/asm/switch_to.h deleted file mode 100644 index cf97d20da61..00000000000 --- a/arch/x86/um/asm/switch_to.h +++ /dev/null @@ -1,7 +0,0 @@ -#ifndef _ASM_UM_SWITCH_TO_H_ -#define _ASM_UM_SWITCH_TO_H_ - -extern void *_switch_to(void *prev, void *next, void *last); -#define switch_to(prev, next, last) prev = _switch_to(prev, next, last) - -#endif -- cgit v1.2.3-70-g09d2 From 657b12d3a1508a3f06f7afe21d5dda7252279520 Mon Sep 17 00:00:00 2001 From: Boaz Harrosh Date: Mon, 26 Mar 2012 19:18:22 -0700 Subject: um: uml_setup_stubs': warning: unused variable 'pages' Fix the following gcc complain arch/um/kernel/skas/mmu.c: In function 'uml_setup_stubs': arch/um/kernel/skas/mmu.c:106:16: warning: unused variable 'pages' [-Wunused-variable] Signed-Signed-off-by: Boaz Harrosh Signed-off-by: Richard Weinberger --- arch/um/kernel/skas/mmu.c | 1 - 1 file changed, 1 deletion(-) (limited to 'arch') diff --git a/arch/um/kernel/skas/mmu.c b/arch/um/kernel/skas/mmu.c index 4947b319f53..0a49ef0c2bf 100644 --- a/arch/um/kernel/skas/mmu.c +++ b/arch/um/kernel/skas/mmu.c @@ -103,7 +103,6 @@ int init_new_context(struct task_struct *task, struct mm_struct *mm) void uml_setup_stubs(struct mm_struct *mm) { - struct page **pages; int err, ret; if (!skas_needs_stub) -- cgit v1.2.3-70-g09d2 From 08f1ec8a594c60bf3856e3c45b6d15fd691d90bb Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Tue, 10 Apr 2012 17:21:35 +1000 Subject: powerpc: Fix page fault with lockdep regression commit a546498f3bf9aac311c66f965186373aee2ca0b0 introduced a regression on 32-bit when irq tracing is enabled by exposing an old bug in our irq tracing code for exception entry. The code would save and restore some GPRs around the calls to the C lockdep code, however, it tries to be too smart for its own good and restores some of the GPRs from the exception frame (as saved there on exception entry). However, for page faults, we do replace those GPRs with arguments to do_page_fault before we call transfer_to_handler and so restoring from the exception frame is plain wrong in this case. This was fine as long as we didn't touch the interrupt state when taking page fault, but when I started doing it, it would trigger the lockdep calls and the bug. This fixes it by cleaning up that code a bit. It did create a small stack frame for the sake of backtraces, so let's make it a bit bigger and use it to save and restore the stuff we care about. Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/entry_32.S | 39 +++++++++++++++++++++------------------ 1 file changed, 21 insertions(+), 18 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/kernel/entry_32.S b/arch/powerpc/kernel/entry_32.S index 3e57a00b8cb..ba3aeb4bc06 100644 --- a/arch/powerpc/kernel/entry_32.S +++ b/arch/powerpc/kernel/entry_32.S @@ -206,40 +206,43 @@ reenable_mmu: /* re-enable mmu so we can */ andi. r10,r10,MSR_EE /* Did EE change? */ beq 1f - /* Save handler and return address into the 2 unused words - * of the STACK_FRAME_OVERHEAD (sneak sneak sneak). Everything - * else can be recovered from the pt_regs except r3 which for - * normal interrupts has been set to pt_regs and for syscalls - * is an argument, so we temporarily use ORIG_GPR3 to save it - */ - stw r9,8(r1) - stw r11,12(r1) - stw r3,ORIG_GPR3(r1) /* * The trace_hardirqs_off will use CALLER_ADDR0 and CALLER_ADDR1. * If from user mode there is only one stack frame on the stack, and * accessing CALLER_ADDR1 will cause oops. So we need create a dummy * stack frame to make trace_hardirqs_off happy. + * + * This is handy because we also need to save a bunch of GPRs, + * r3 can be different from GPR3(r1) at this point, r9 and r11 + * contains the old MSR and handler address respectively, + * r4 & r5 can contain page fault arguments that need to be passed + * along as well. r12, CCR, CTR, XER etc... are left clobbered as + * they aren't useful past this point (aren't syscall arguments), + * the rest is restored from the exception frame. */ + stwu r1,-32(r1) + stw r9,8(r1) + stw r11,12(r1) + stw r3,16(r1) + stw r4,20(r1) + stw r5,24(r1) andi. r12,r12,MSR_PR - beq 11f - stwu r1,-16(r1) + b 11f bl trace_hardirqs_off - addi r1,r1,16 b 12f - 11: bl trace_hardirqs_off 12: + lwz r5,24(r1) + lwz r4,20(r1) + lwz r3,16(r1) + lwz r11,12(r1) + lwz r9,8(r1) + addi r1,r1,32 lwz r0,GPR0(r1) - lwz r3,ORIG_GPR3(r1) - lwz r4,GPR4(r1) - lwz r5,GPR5(r1) lwz r6,GPR6(r1) lwz r7,GPR7(r1) lwz r8,GPR8(r1) - lwz r9,8(r1) - lwz r11,12(r1) 1: mtctr r11 mtlr r9 bctr /* jump to handler */ -- cgit v1.2.3-70-g09d2 From dff2aa7af8c96a11f75d858859f0e0c78b193d12 Mon Sep 17 00:00:00 2001 From: Kautuk Consul Date: Mon, 2 Apr 2012 18:19:49 +0100 Subject: ARM: 7368/1: fault.c: correct how the tsk->[maj|min]_flt gets incremented commit 8878a539ff19a43cf3729e7562cd528f490246ae was done by me to make the page fault handler retryable as well as interruptible. Due to this commit, there is a mistake in the way in which tsk->[maj|min]_flt counter gets incremented for VM_FAULT_ERROR: If VM_FAULT_ERROR is returned in the fault flags by handle_mm_fault, then either maj_flt or min_flt will get incremented. This is wrong as in the case of a VM_FAULT_ERROR we need to be skip ahead to the error handling code in do_page_fault. Added a check after the call to __do_page_fault() to check for (fault & VM_FAULT_ERROR). Signed-off-by: Kautuk Consul Signed-off-by: Russell King --- arch/arm/mm/fault.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mm/fault.c b/arch/arm/mm/fault.c index 9055b5a84ec..f0746753336 100644 --- a/arch/arm/mm/fault.c +++ b/arch/arm/mm/fault.c @@ -320,7 +320,7 @@ retry: */ perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS, 1, regs, addr); - if (flags & FAULT_FLAG_ALLOW_RETRY) { + if (!(fault & VM_FAULT_ERROR) && flags & FAULT_FLAG_ALLOW_RETRY) { if (fault & VM_FAULT_MAJOR) { tsk->maj_flt++; perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS_MAJ, 1, -- cgit v1.2.3-70-g09d2 From 34af657916332e89564566bc8d35e3e06cc0c236 Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Thu, 5 Apr 2012 19:42:10 +0100 Subject: ARM: 7377/1: vic: re-read status register before dispatching each IRQ handler handle_IRQ may briefly cause interrupts to be re-enabled during soft IRQ processing on the exit path, leading to nested handling of VIC interrupts. Since the current code does not re-read the VIC_IRQ_STATUS register, this can lead to multiple invocations of the same interrupt handler and spurious interrupts to be reported. This patch changes the VIC interrupt dispatching code to re-read the status register each time, avoiding duplicate invocations of the same handler. Acked-and-Tested-by: H Hartley Sweeten Reviewed-by: Jamie Iles Signed-off-by: Will Deacon Signed-off-by: Russell King --- arch/arm/common/vic.c | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/arm/common/vic.c b/arch/arm/common/vic.c index 7a66311f306..7e288f96ced 100644 --- a/arch/arm/common/vic.c +++ b/arch/arm/common/vic.c @@ -427,19 +427,18 @@ int __init vic_of_init(struct device_node *node, struct device_node *parent) /* * Handle each interrupt in a single VIC. Returns non-zero if we've - * handled at least one interrupt. This does a single read of the - * status register and handles all interrupts in order from LSB first. + * handled at least one interrupt. This reads the status register + * before handling each interrupt, which is necessary given that + * handle_IRQ may briefly re-enable interrupts for soft IRQ handling. */ static int handle_one_vic(struct vic_device *vic, struct pt_regs *regs) { u32 stat, irq; int handled = 0; - stat = readl_relaxed(vic->base + VIC_IRQ_STATUS); - while (stat) { + while ((stat = readl_relaxed(vic->base + VIC_IRQ_STATUS))) { irq = ffs(stat) - 1; handle_IRQ(irq_find_mapping(vic->domain, irq), regs); - stat &= ~(1 << irq); handled = 1; } -- cgit v1.2.3-70-g09d2 From f19a0c2c2e6add90b7d6a1b7595abebfe2e4c37a Mon Sep 17 00:00:00 2001 From: Gleb Natapov Date: Mon, 9 Apr 2012 17:38:35 +0300 Subject: KVM: PMU emulation: GLOBAL_CTRL MSR should be enabled on reset On reset all MPU counters should be enabled in GLOBAL_CTRL MSR. Signed-off-by: Gleb Natapov Signed-off-by: Avi Kivity --- arch/x86/kvm/pmu.c | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-) (limited to 'arch') diff --git a/arch/x86/kvm/pmu.c b/arch/x86/kvm/pmu.c index 173df38dbda..2e88438ffd8 100644 --- a/arch/x86/kvm/pmu.c +++ b/arch/x86/kvm/pmu.c @@ -459,17 +459,17 @@ void kvm_pmu_cpuid_update(struct kvm_vcpu *vcpu) pmu->available_event_types = ~entry->ebx & ((1ull << bitmap_len) - 1); if (pmu->version == 1) { - pmu->global_ctrl = (1 << pmu->nr_arch_gp_counters) - 1; - return; + pmu->nr_arch_fixed_counters = 0; + } else { + pmu->nr_arch_fixed_counters = min((int)(entry->edx & 0x1f), + X86_PMC_MAX_FIXED); + pmu->counter_bitmask[KVM_PMC_FIXED] = + ((u64)1 << ((entry->edx >> 5) & 0xff)) - 1; } - pmu->nr_arch_fixed_counters = min((int)(entry->edx & 0x1f), - X86_PMC_MAX_FIXED); - pmu->counter_bitmask[KVM_PMC_FIXED] = - ((u64)1 << ((entry->edx >> 5) & 0xff)) - 1; - pmu->global_ctrl_mask = ~(((1 << pmu->nr_arch_gp_counters) - 1) - | (((1ull << pmu->nr_arch_fixed_counters) - 1) - << X86_PMC_IDX_FIXED)); + pmu->global_ctrl = ((1 << pmu->nr_arch_gp_counters) - 1) | + (((1ull << pmu->nr_arch_fixed_counters) - 1) << X86_PMC_IDX_FIXED); + pmu->global_ctrl_mask = ~pmu->global_ctrl; } void kvm_pmu_init(struct kvm_vcpu *vcpu) -- cgit v1.2.3-70-g09d2 From 6e7beb7ec8b8c3a1927d4d02c33a0e2a8e72eec3 Mon Sep 17 00:00:00 2001 From: Sachin Kamat Date: Tue, 10 Apr 2012 08:31:48 -0700 Subject: ARM: S5PV210: Fix compiler warning in dma.c file Fixes the following warning: warning: 'dma_dmamask' defined but not used [-Wunused-variable] Signed-off-by: Sachin Kamat Signed-off-by: Kukjin Kim --- arch/arm/mach-s5pv210/dma.c | 2 -- 1 file changed, 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-s5pv210/dma.c b/arch/arm/mach-s5pv210/dma.c index 86ce62f6619..b8337e248b0 100644 --- a/arch/arm/mach-s5pv210/dma.c +++ b/arch/arm/mach-s5pv210/dma.c @@ -33,8 +33,6 @@ #include #include -static u64 dma_dmamask = DMA_BIT_MASK(32); - static u8 pdma0_peri[] = { DMACH_UART0_RX, DMACH_UART0_TX, -- cgit v1.2.3-70-g09d2 From 60806225cdad7f582fcf5e2d7a089486f9718f2f Mon Sep 17 00:00:00 2001 From: Thomas Abraham Date: Tue, 10 Apr 2012 08:37:59 -0700 Subject: ARM: EXYNOS: Add PDMA and MDMA physical base address defines Add PDMA and MDMA physical base address macros which is require for EXYNOS5 of_dev_auxdata setup. Signed-off-by: Thomas Abraham [kgene.kim@samsung.com: changed dma channel fo mdma1] Signed-off-by: Kukjin Kim --- arch/arm/mach-exynos/include/mach/map.h | 4 ++++ arch/arm/mach-exynos/mach-exynos5-dt.c | 2 +- 2 files changed, 5 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-exynos/include/mach/map.h b/arch/arm/mach-exynos/include/mach/map.h index 024d38ff171..6e6d11ff352 100644 --- a/arch/arm/mach-exynos/include/mach/map.h +++ b/arch/arm/mach-exynos/include/mach/map.h @@ -89,6 +89,10 @@ #define EXYNOS4_PA_MDMA1 0x12840000 #define EXYNOS4_PA_PDMA0 0x12680000 #define EXYNOS4_PA_PDMA1 0x12690000 +#define EXYNOS5_PA_MDMA0 0x10800000 +#define EXYNOS5_PA_MDMA1 0x11C10000 +#define EXYNOS5_PA_PDMA0 0x121A0000 +#define EXYNOS5_PA_PDMA1 0x121B0000 #define EXYNOS4_PA_SYSMMU_MDMA 0x10A40000 #define EXYNOS4_PA_SYSMMU_SSS 0x10A50000 diff --git a/arch/arm/mach-exynos/mach-exynos5-dt.c b/arch/arm/mach-exynos/mach-exynos5-dt.c index 0d26f50081a..4711c8920e3 100644 --- a/arch/arm/mach-exynos/mach-exynos5-dt.c +++ b/arch/arm/mach-exynos/mach-exynos5-dt.c @@ -45,7 +45,7 @@ static const struct of_dev_auxdata exynos5250_auxdata_lookup[] __initconst = { "exynos4210-uart.3", NULL), OF_DEV_AUXDATA("arm,pl330", EXYNOS5_PA_PDMA0, "dma-pl330.0", NULL), OF_DEV_AUXDATA("arm,pl330", EXYNOS5_PA_PDMA1, "dma-pl330.1", NULL), - OF_DEV_AUXDATA("arm,pl330", EXYNOS5_PA_PDMA1, "dma-pl330.2", NULL), + OF_DEV_AUXDATA("arm,pl330", EXYNOS5_PA_MDMA1, "dma-pl330.2", NULL), {}, }; -- cgit v1.2.3-70-g09d2 From fae2e0fb24c61ca68c98d854a34732549ebc1854 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Wed, 11 Apr 2012 10:42:15 +1000 Subject: powerpc: Fix typo in runlatch code Commit fe1952fc0afb9a2e4c79f103c08aef5d13db1873 "powerpc: Rework runlatch code" has a nasty typo where it uses "TLF_RUNLATCH" instead of "_TLF_RUNLATCH" (bit number instead of bit mask), causing some flags to be potentially lost such as _TLF_RESTORE_SIGMASK (Brown paper bag for me ! We should be able to make that break at compile time with a bit of magic, any volunteer ?) Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/process.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c index f88698c0f33..4937c969009 100644 --- a/arch/powerpc/kernel/process.c +++ b/arch/powerpc/kernel/process.c @@ -1235,7 +1235,7 @@ void __ppc64_runlatch_on(void) ctrl |= CTRL_RUNLATCH; mtspr(SPRN_CTRLT, ctrl); - ti->local_flags |= TLF_RUNLATCH; + ti->local_flags |= _TLF_RUNLATCH; } /* Called with hard IRQs off */ @@ -1244,7 +1244,7 @@ void __ppc64_runlatch_off(void) struct thread_info *ti = current_thread_info(); unsigned long ctrl; - ti->local_flags &= ~TLF_RUNLATCH; + ti->local_flags &= ~_TLF_RUNLATCH; ctrl = mfspr(SPRN_CTRLF); ctrl &= ~CTRL_RUNLATCH; -- cgit v1.2.3-70-g09d2 From a699e4e49ec3fb62c4a44394357d14081df10bef Mon Sep 17 00:00:00 2001 From: Grant Likely Date: Tue, 3 Apr 2012 07:11:04 -0600 Subject: irq: Kill pointless irqd_to_hw export It makes no sense to export this trivial function. Make it a static inline instead. This patch also drops virq_to_hw from arch/c6x since it is unused by that architecture. v2: Move irq_hw_number_t into types.h to fix ARM build failure Signed-off-by: Grant Likely Acked-by: Thomas Gleixner Cc: Benjamin Herrenschmidt --- arch/c6x/include/asm/irq.h | 4 ---- arch/c6x/kernel/irq.c | 13 ------------- arch/powerpc/include/asm/irq.h | 2 -- arch/powerpc/kernel/irq.c | 6 ------ include/linux/irq.h | 5 +++++ include/linux/irqdomain.h | 6 ------ include/linux/types.h | 6 ++++++ 7 files changed, 11 insertions(+), 31 deletions(-) (limited to 'arch') diff --git a/arch/c6x/include/asm/irq.h b/arch/c6x/include/asm/irq.h index f13b78d5e1c..ab4577f93d9 100644 --- a/arch/c6x/include/asm/irq.h +++ b/arch/c6x/include/asm/irq.h @@ -42,10 +42,6 @@ /* This number is used when no interrupt has been assigned */ #define NO_IRQ 0 -struct irq_data; -extern irq_hw_number_t irqd_to_hwirq(struct irq_data *d); -extern irq_hw_number_t virq_to_hw(unsigned int virq); - extern void __init init_pic_c64xplus(void); extern void init_IRQ(void); diff --git a/arch/c6x/kernel/irq.c b/arch/c6x/kernel/irq.c index 65b8ddf54b4..c90fb5e82ad 100644 --- a/arch/c6x/kernel/irq.c +++ b/arch/c6x/kernel/irq.c @@ -130,16 +130,3 @@ int arch_show_interrupts(struct seq_file *p, int prec) seq_printf(p, "%*s: %10lu\n", prec, "Err", irq_err_count); return 0; } - -irq_hw_number_t irqd_to_hwirq(struct irq_data *d) -{ - return d->hwirq; -} -EXPORT_SYMBOL_GPL(irqd_to_hwirq); - -irq_hw_number_t virq_to_hw(unsigned int virq) -{ - struct irq_data *irq_data = irq_get_irq_data(virq); - return WARN_ON(!irq_data) ? 0 : irq_data->hwirq; -} -EXPORT_SYMBOL_GPL(virq_to_hw); diff --git a/arch/powerpc/include/asm/irq.h b/arch/powerpc/include/asm/irq.h index cf417e51073..e648af92ced 100644 --- a/arch/powerpc/include/asm/irq.h +++ b/arch/powerpc/include/asm/irq.h @@ -33,8 +33,6 @@ extern atomic_t ppc_n_lost_interrupts; /* Same thing, used by the generic IRQ code */ #define NR_IRQS_LEGACY NUM_ISA_INTERRUPTS -struct irq_data; -extern irq_hw_number_t irqd_to_hwirq(struct irq_data *d); extern irq_hw_number_t virq_to_hw(unsigned int virq); /** diff --git a/arch/powerpc/kernel/irq.c b/arch/powerpc/kernel/irq.c index 243dbabfe74..5ec1b2354ca 100644 --- a/arch/powerpc/kernel/irq.c +++ b/arch/powerpc/kernel/irq.c @@ -560,12 +560,6 @@ void do_softirq(void) local_irq_restore(flags); } -irq_hw_number_t irqd_to_hwirq(struct irq_data *d) -{ - return d->hwirq; -} -EXPORT_SYMBOL_GPL(irqd_to_hwirq); - irq_hw_number_t virq_to_hw(unsigned int virq) { struct irq_data *irq_data = irq_get_irq_data(virq); diff --git a/include/linux/irq.h b/include/linux/irq.h index bff29c58da2..7810406f3d8 100644 --- a/include/linux/irq.h +++ b/include/linux/irq.h @@ -263,6 +263,11 @@ static inline void irqd_clr_chained_irq_inprogress(struct irq_data *d) d->state_use_accessors &= ~IRQD_IRQ_INPROGRESS; } +static inline irq_hw_number_t irqd_to_hwirq(struct irq_data *d) +{ + return d->hwirq; +} + /** * struct irq_chip - hardware interrupt chip descriptor * diff --git a/include/linux/irqdomain.h b/include/linux/irqdomain.h index ead4a421579..ac17b9b2e7b 100644 --- a/include/linux/irqdomain.h +++ b/include/linux/irqdomain.h @@ -42,12 +42,6 @@ struct of_device_id; /* Number of irqs reserved for a legacy isa controller */ #define NUM_ISA_INTERRUPTS 16 -/* This type is the placeholder for a hardware interrupt number. It has to - * be big enough to enclose whatever representation is used by a given - * platform. - */ -typedef unsigned long irq_hw_number_t; - /** * struct irq_domain_ops - Methods for irq_domain objects * @match: Match an interrupt controller device node to a host, returns diff --git a/include/linux/types.h b/include/linux/types.h index e5fa5034551..7f480db6023 100644 --- a/include/linux/types.h +++ b/include/linux/types.h @@ -210,6 +210,12 @@ typedef u32 phys_addr_t; typedef phys_addr_t resource_size_t; +/* + * This type is the placeholder for a hardware interrupt number. It has to be + * big enough to enclose whatever representation is used by a given platform. + */ +typedef unsigned long irq_hw_number_t; + typedef struct { int counter; } atomic_t; -- cgit v1.2.3-70-g09d2 From b785e0d06ac551f80204742682be3218158234d1 Mon Sep 17 00:00:00 2001 From: Michael Holzheu Date: Wed, 11 Apr 2012 14:28:06 +0200 Subject: [S390] kernel: Use local_irq_save() for memcpy_real() Currently in the memcpy_real() function interrupts are disabled with __arch_local_irq_stnsm(). In order to notify lockdep that interrupts are disabled, with this patch local_irq_save() is used instead. The function __arch_local_irq_stnsm() is still used for switching to real mode. Reviewed-by: Heiko Carstens Signed-off-by: Michael Holzheu Signed-off-by: Martin Schwidefsky --- arch/s390/mm/maccess.c | 27 ++++++++++++++++++--------- 1 file changed, 18 insertions(+), 9 deletions(-) (limited to 'arch') diff --git a/arch/s390/mm/maccess.c b/arch/s390/mm/maccess.c index 7bb15fcca75..e1335dc2b1b 100644 --- a/arch/s390/mm/maccess.c +++ b/arch/s390/mm/maccess.c @@ -61,21 +61,14 @@ long probe_kernel_write(void *dst, const void *src, size_t size) return copied < 0 ? -EFAULT : 0; } -/* - * Copy memory in real mode (kernel to kernel) - */ -int memcpy_real(void *dest, void *src, size_t count) +static int __memcpy_real(void *dest, void *src, size_t count) { register unsigned long _dest asm("2") = (unsigned long) dest; register unsigned long _len1 asm("3") = (unsigned long) count; register unsigned long _src asm("4") = (unsigned long) src; register unsigned long _len2 asm("5") = (unsigned long) count; - unsigned long flags; int rc = -EFAULT; - if (!count) - return 0; - flags = __arch_local_irq_stnsm(0xf8UL); asm volatile ( "0: mvcle %1,%2,0x0\n" "1: jo 0b\n" @@ -86,7 +79,23 @@ int memcpy_real(void *dest, void *src, size_t count) "+d" (_len2), "=m" (*((long *) dest)) : "m" (*((long *) src)) : "cc", "memory"); - arch_local_irq_restore(flags); + return rc; +} + +/* + * Copy memory in real mode (kernel to kernel) + */ +int memcpy_real(void *dest, void *src, size_t count) +{ + unsigned long flags; + int rc; + + if (!count) + return 0; + local_irq_save(flags); + __arch_local_irq_stnsm(0xfbUL); + rc = __memcpy_real(dest, src, count); + local_irq_restore(flags); return rc; } -- cgit v1.2.3-70-g09d2 From cd94154cc6a28dd9dc271042c1a59c08d26da886 Mon Sep 17 00:00:00 2001 From: Martin Schwidefsky Date: Wed, 11 Apr 2012 14:28:07 +0200 Subject: [S390] fix tlb flushing for page table pages Git commit 36409f6353fc2d7b6516e631415f938eadd92ffa "use generic RCU page-table freeing code" introduced a tlb flushing bug. Partially revert the above git commit and go back to s390 specific page table flush code. For s390 the TLB can contain three types of entries, "normal" TLB page-table entries, TLB combined region-and-segment-table (CRST) entries and real-space entries. Linux does not use real-space entries which leaves normal TLB entries and CRST entries. The CRST entries are intermediate steps in the page-table translation called translation paths. For example a 4K page access in a three-level page table setup will create two CRST TLB entries and one page-table TLB entry. The advantage of that approach is that a page access next to the previous one can reuse the CRST entries and needs just a single read from memory to create the page-table TLB entry. The disadvantage is that the TLB flushing rules are more complicated, before any page-table may be freed the TLB needs to be flushed. In short: the generic RCU page-table freeing code is incorrect for the CRST entries, in particular the check for mm_users < 2 is troublesome. This is applicable to 3.0+ kernels. Cc: Signed-off-by: Martin Schwidefsky --- arch/s390/Kconfig | 1 - arch/s390/include/asm/pgalloc.h | 3 -- arch/s390/include/asm/tlb.h | 22 +------------- arch/s390/mm/pgtable.c | 63 +++++++++++++++++++++++++++++++++++++++-- 4 files changed, 61 insertions(+), 28 deletions(-) (limited to 'arch') diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig index 2b7c0fbe578..9015060919a 100644 --- a/arch/s390/Kconfig +++ b/arch/s390/Kconfig @@ -90,7 +90,6 @@ config S390 select HAVE_KERNEL_XZ select HAVE_ARCH_MUTEX_CPU_RELAX select HAVE_ARCH_JUMP_LABEL if !MARCH_G5 - select HAVE_RCU_TABLE_FREE if SMP select ARCH_SAVE_PAGE_KEYS if HIBERNATION select HAVE_MEMBLOCK select HAVE_MEMBLOCK_NODE_MAP diff --git a/arch/s390/include/asm/pgalloc.h b/arch/s390/include/asm/pgalloc.h index 8eef9b5b3cf..78e3041919d 100644 --- a/arch/s390/include/asm/pgalloc.h +++ b/arch/s390/include/asm/pgalloc.h @@ -22,10 +22,7 @@ void crst_table_free(struct mm_struct *, unsigned long *); unsigned long *page_table_alloc(struct mm_struct *, unsigned long); void page_table_free(struct mm_struct *, unsigned long *); -#ifdef CONFIG_HAVE_RCU_TABLE_FREE void page_table_free_rcu(struct mmu_gather *, unsigned long *); -void __tlb_remove_table(void *_table); -#endif static inline void clear_table(unsigned long *s, unsigned long val, size_t n) { diff --git a/arch/s390/include/asm/tlb.h b/arch/s390/include/asm/tlb.h index c687a2c8346..775a5eea8f9 100644 --- a/arch/s390/include/asm/tlb.h +++ b/arch/s390/include/asm/tlb.h @@ -30,14 +30,10 @@ struct mmu_gather { struct mm_struct *mm; -#ifdef CONFIG_HAVE_RCU_TABLE_FREE struct mmu_table_batch *batch; -#endif unsigned int fullmm; - unsigned int need_flush; }; -#ifdef CONFIG_HAVE_RCU_TABLE_FREE struct mmu_table_batch { struct rcu_head rcu; unsigned int nr; @@ -49,7 +45,6 @@ struct mmu_table_batch { extern void tlb_table_flush(struct mmu_gather *tlb); extern void tlb_remove_table(struct mmu_gather *tlb, void *table); -#endif static inline void tlb_gather_mmu(struct mmu_gather *tlb, struct mm_struct *mm, @@ -57,29 +52,20 @@ static inline void tlb_gather_mmu(struct mmu_gather *tlb, { tlb->mm = mm; tlb->fullmm = full_mm_flush; - tlb->need_flush = 0; -#ifdef CONFIG_HAVE_RCU_TABLE_FREE tlb->batch = NULL; -#endif if (tlb->fullmm) __tlb_flush_mm(mm); } static inline void tlb_flush_mmu(struct mmu_gather *tlb) { - if (!tlb->need_flush) - return; - tlb->need_flush = 0; - __tlb_flush_mm(tlb->mm); -#ifdef CONFIG_HAVE_RCU_TABLE_FREE tlb_table_flush(tlb); -#endif } static inline void tlb_finish_mmu(struct mmu_gather *tlb, unsigned long start, unsigned long end) { - tlb_flush_mmu(tlb); + tlb_table_flush(tlb); } /* @@ -105,10 +91,8 @@ static inline void tlb_remove_page(struct mmu_gather *tlb, struct page *page) static inline void pte_free_tlb(struct mmu_gather *tlb, pgtable_t pte, unsigned long address) { -#ifdef CONFIG_HAVE_RCU_TABLE_FREE if (!tlb->fullmm) return page_table_free_rcu(tlb, (unsigned long *) pte); -#endif page_table_free(tlb->mm, (unsigned long *) pte); } @@ -125,10 +109,8 @@ static inline void pmd_free_tlb(struct mmu_gather *tlb, pmd_t *pmd, #ifdef __s390x__ if (tlb->mm->context.asce_limit <= (1UL << 31)) return; -#ifdef CONFIG_HAVE_RCU_TABLE_FREE if (!tlb->fullmm) return tlb_remove_table(tlb, pmd); -#endif crst_table_free(tlb->mm, (unsigned long *) pmd); #endif } @@ -146,10 +128,8 @@ static inline void pud_free_tlb(struct mmu_gather *tlb, pud_t *pud, #ifdef __s390x__ if (tlb->mm->context.asce_limit <= (1UL << 42)) return; -#ifdef CONFIG_HAVE_RCU_TABLE_FREE if (!tlb->fullmm) return tlb_remove_table(tlb, pud); -#endif crst_table_free(tlb->mm, (unsigned long *) pud); #endif } diff --git a/arch/s390/mm/pgtable.c b/arch/s390/mm/pgtable.c index 373adf69b01..6e765bf0067 100644 --- a/arch/s390/mm/pgtable.c +++ b/arch/s390/mm/pgtable.c @@ -678,8 +678,6 @@ void page_table_free(struct mm_struct *mm, unsigned long *table) } } -#ifdef CONFIG_HAVE_RCU_TABLE_FREE - static void __page_table_free_rcu(void *table, unsigned bit) { struct page *page; @@ -733,7 +731,66 @@ void __tlb_remove_table(void *_table) free_pages((unsigned long) table, ALLOC_ORDER); } -#endif +static void tlb_remove_table_smp_sync(void *arg) +{ + /* Simply deliver the interrupt */ +} + +static void tlb_remove_table_one(void *table) +{ + /* + * This isn't an RCU grace period and hence the page-tables cannot be + * assumed to be actually RCU-freed. + * + * It is however sufficient for software page-table walkers that rely + * on IRQ disabling. See the comment near struct mmu_table_batch. + */ + smp_call_function(tlb_remove_table_smp_sync, NULL, 1); + __tlb_remove_table(table); +} + +static void tlb_remove_table_rcu(struct rcu_head *head) +{ + struct mmu_table_batch *batch; + int i; + + batch = container_of(head, struct mmu_table_batch, rcu); + + for (i = 0; i < batch->nr; i++) + __tlb_remove_table(batch->tables[i]); + + free_page((unsigned long)batch); +} + +void tlb_table_flush(struct mmu_gather *tlb) +{ + struct mmu_table_batch **batch = &tlb->batch; + + if (*batch) { + __tlb_flush_mm(tlb->mm); + call_rcu_sched(&(*batch)->rcu, tlb_remove_table_rcu); + *batch = NULL; + } +} + +void tlb_remove_table(struct mmu_gather *tlb, void *table) +{ + struct mmu_table_batch **batch = &tlb->batch; + + if (*batch == NULL) { + *batch = (struct mmu_table_batch *) + __get_free_page(GFP_NOWAIT | __GFP_NOWARN); + if (*batch == NULL) { + __tlb_flush_mm(tlb->mm); + tlb_remove_table_one(table); + return; + } + (*batch)->nr = 0; + } + (*batch)->tables[(*batch)->nr++] = table; + if ((*batch)->nr == MAX_TABLE_BATCH) + tlb_table_flush(tlb); +} /* * switch on pgstes for its userspace process (for kvm) -- cgit v1.2.3-70-g09d2 From ac2ac6e852716448d962033a041182cd1e2d3c01 Mon Sep 17 00:00:00 2001 From: Michael Holzheu Date: Wed, 11 Apr 2012 14:28:08 +0200 Subject: [S390] update default configuration Add TASKSTATS options, enable CRASH_DUMP, and regenerate defconfig file with "make savedefconfig". Signed-off-by: Michael Holzheu Signed-off-by: Martin Schwidefsky --- arch/s390/defconfig | 37 ++++++++++++++++++------------------- 1 file changed, 18 insertions(+), 19 deletions(-) (limited to 'arch') diff --git a/arch/s390/defconfig b/arch/s390/defconfig index 6cf8e26b313..1957a9dd256 100644 --- a/arch/s390/defconfig +++ b/arch/s390/defconfig @@ -1,8 +1,12 @@ CONFIG_EXPERIMENTAL=y CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y +CONFIG_FHANDLE=y +CONFIG_TASKSTATS=y +CONFIG_TASK_DELAY_ACCT=y +CONFIG_TASK_XACCT=y +CONFIG_TASK_IO_ACCOUNTING=y CONFIG_AUDIT=y -CONFIG_RCU_TRACE=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_CGROUPS=y @@ -14,16 +18,22 @@ CONFIG_CGROUP_MEM_RES_CTLR_SWAP=y CONFIG_CGROUP_SCHED=y CONFIG_RT_GROUP_SCHED=y CONFIG_BLK_CGROUP=y +CONFIG_NAMESPACES=y CONFIG_BLK_DEV_INITRD=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_RD_BZIP2=y +CONFIG_RD_LZMA=y +CONFIG_RD_XZ=y +CONFIG_RD_LZO=y +CONFIG_EXPERT=y # CONFIG_COMPAT_BRK is not set -CONFIG_SLAB=y CONFIG_PROFILING=y CONFIG_OPROFILE=y CONFIG_KPROBES=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y CONFIG_MODVERSIONS=y +CONFIG_PARTITION_ADVANCED=y +CONFIG_IBM_PARTITION=y CONFIG_DEFAULT_DEADLINE=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y @@ -34,18 +44,15 @@ CONFIG_KSM=y CONFIG_BINFMT_MISC=m CONFIG_CMM=m CONFIG_HZ_100=y -CONFIG_KEXEC=y -CONFIG_PM=y +CONFIG_CRASH_DUMP=y CONFIG_HIBERNATION=y CONFIG_PACKET=y CONFIG_UNIX=y CONFIG_NET_KEY=y -CONFIG_AFIUCV=m CONFIG_INET=y CONFIG_IP_MULTICAST=y # CONFIG_INET_LRO is not set CONFIG_IPV6=y -CONFIG_NET_SCTPPROBE=m CONFIG_L2TP=m CONFIG_L2TP_DEBUGFS=m CONFIG_VLAN_8021Q=y @@ -84,15 +91,14 @@ CONFIG_SCSI_CONSTANTS=y CONFIG_SCSI_LOGGING=y CONFIG_SCSI_SCAN_ASYNC=y CONFIG_ZFCP=y -CONFIG_ZFCP_DIF=y CONFIG_NETDEVICES=y -CONFIG_DUMMY=m CONFIG_BONDING=m +CONFIG_DUMMY=m CONFIG_EQUALIZER=m CONFIG_TUN=m -CONFIG_NET_ETHERNET=y CONFIG_VIRTIO_NET=y CONFIG_RAW_DRIVER=m +CONFIG_VIRTIO_BALLOON=y CONFIG_EXT2_FS=y CONFIG_EXT3_FS=y # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set @@ -103,27 +109,21 @@ CONFIG_PROC_KCORE=y CONFIG_TMPFS=y CONFIG_TMPFS_POSIX_ACL=y # CONFIG_NETWORK_FILESYSTEMS is not set -CONFIG_PARTITION_ADVANCED=y -CONFIG_IBM_PARTITION=y -CONFIG_DLM=m CONFIG_MAGIC_SYSRQ=y -CONFIG_DEBUG_KERNEL=y CONFIG_TIMER_STATS=y CONFIG_PROVE_LOCKING=y CONFIG_PROVE_RCU=y CONFIG_LOCK_STAT=y CONFIG_DEBUG_LOCKDEP=y -CONFIG_DEBUG_SPINLOCK_SLEEP=y CONFIG_DEBUG_LIST=y CONFIG_DEBUG_NOTIFIERS=y -# CONFIG_RCU_CPU_STALL_DETECTOR is not set +CONFIG_RCU_TRACE=y CONFIG_KPROBES_SANITY_TEST=y CONFIG_DEBUG_FORCE_WEAK_PER_CPU=y CONFIG_CPU_NOTIFIER_ERROR_INJECT=m CONFIG_LATENCYTOP=y -CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_DEBUG_PAGEALLOC=y -# CONFIG_FTRACE is not set +CONFIG_BLK_DEV_IO_TRACE=y # CONFIG_STRICT_DEVMEM is not set CONFIG_CRYPTO_NULL=m CONFIG_CRYPTO_CRYPTD=m @@ -173,4 +173,3 @@ CONFIG_CRYPTO_SHA512_S390=m CONFIG_CRYPTO_DES_S390=m CONFIG_CRYPTO_AES_S390=m CONFIG_CRC7=m -CONFIG_VIRTIO_BALLOON=y -- cgit v1.2.3-70-g09d2 From 7968ca814801b403ebd0829eda7a92e3eef23b45 Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Wed, 11 Apr 2012 14:28:09 +0200 Subject: [S390] irq: simple coding style change Use braces for if/else/list_for_each_entry bodies if the body consists of more than a single line. Otherwise I get confused and check if there is something broken whenever I see these code snippets. Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky --- arch/s390/kernel/irq.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/s390/kernel/irq.c b/arch/s390/kernel/irq.c index 1c2cdd59ccd..8a22c27219d 100644 --- a/arch/s390/kernel/irq.c +++ b/arch/s390/kernel/irq.c @@ -118,9 +118,10 @@ asmlinkage void do_softirq(void) "a" (__do_softirq) : "0", "1", "2", "3", "4", "5", "14", "cc", "memory" ); - } else + } else { /* We are already on the async stack. */ __do_softirq(); + } } local_irq_restore(flags); @@ -192,11 +193,12 @@ int unregister_external_interrupt(u16 code, ext_int_handler_t handler) int index = ext_hash(code); spin_lock_irqsave(&ext_int_hash_lock, flags); - list_for_each_entry_rcu(p, &ext_int_hash[index], entry) + list_for_each_entry_rcu(p, &ext_int_hash[index], entry) { if (p->code == code && p->handler == handler) { list_del_rcu(&p->entry); kfree_rcu(p, rcu); } + } spin_unlock_irqrestore(&ext_int_hash_lock, flags); return 0; } @@ -211,9 +213,10 @@ void __irq_entry do_extint(struct pt_regs *regs, struct ext_code ext_code, old_regs = set_irq_regs(regs); irq_enter(); - if (S390_lowcore.int_clock >= S390_lowcore.clock_comparator) + if (S390_lowcore.int_clock >= S390_lowcore.clock_comparator) { /* Serve timer interrupts first. */ clock_comparator_work(); + } kstat_cpu(smp_processor_id()).irqs[EXTERNAL_INTERRUPT]++; if (ext_code.code != 0x1004) __get_cpu_var(s390_idle).nohz_delay = 1; -- cgit v1.2.3-70-g09d2 From af0ee94e541e366ee4b84c6d476c88fd633fe80a Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Wed, 11 Apr 2012 14:28:10 +0200 Subject: [S390] cpum_cf: get rid of compile warnings Fix these: arch/s390/kernel/perf_cpum_cf.c:180:3: warning: format '%lx' expects argument of type 'long unsigned int', but argument 2 has type 'int' [-Wformat] arch/s390/kernel/perf_cpum_cf.c: In function 'cpumf_pmu_disable': arch/s390/kernel/perf_cpum_cf.c:205:3: warning: format '%lx' expects argument of type 'long unsigned int', but argument 2 has type 'int' [-Wformat] Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky --- arch/s390/kernel/perf_cpum_cf.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/s390/kernel/perf_cpum_cf.c b/arch/s390/kernel/perf_cpum_cf.c index 46405086479..cb019f429e8 100644 --- a/arch/s390/kernel/perf_cpum_cf.c +++ b/arch/s390/kernel/perf_cpum_cf.c @@ -178,7 +178,7 @@ static void cpumf_pmu_enable(struct pmu *pmu) err = lcctl(cpuhw->state); if (err) { pr_err("Enabling the performance measuring unit " - "failed with rc=%lx\n", err); + "failed with rc=%x\n", err); return; } @@ -203,7 +203,7 @@ static void cpumf_pmu_disable(struct pmu *pmu) err = lcctl(inactive); if (err) { pr_err("Disabling the performance measuring unit " - "failed with rc=%lx\n", err); + "failed with rc=%x\n", err); return; } -- cgit v1.2.3-70-g09d2 From 37e37c20ab2dbccdc7a7fa5922e182a51adf50f6 Mon Sep 17 00:00:00 2001 From: Michael Holzheu Date: Wed, 11 Apr 2012 14:28:11 +0200 Subject: [S390] Fix stfle() lowcore protection problem The stfle() function writes into lowcore memory when stfl_fac_list is initialized with "S390_lowcore.stfl_fac_list = 0". For older compilers this triggers a lowcore exception. With newer compilers and "-OXX" compile option the bug does not show up because the "S390_lowcore.stfl_fac_list" initialization is removed by the compiler. The reason for thatis the incorrect "=m" (S390_lowcore.stfl_fac_list) constraint in the stfl inline assembly. The following shows the disassembly of the stfle() optimized code that is inlined in the lgr_info_get() function: 000000000011325c : 11325c: eb 9f f0 60 00 24 stmg %r9,%r15,96(%r15) 113262: c0 d0 00 29 0e 47 larl %r13,634ef0 113268: a7 f1 3f c0 tml %r15,16320 11326c: b9 04 00 ef lgr %r14,%r15 113270: a7 84 00 01 je 113272 113274: a7 fb ff c0 aghi %r15,-64 113278: b9 04 00 c2 lgr %r12,%r2 11327c: a7 29 00 01 lghi %r2,1 113280: e3 e0 f0 98 00 24 stg %r14,152(%r15) 113286: d7 97 c0 00 c0 00 xc 0(152,%r12),0(%r12) 11328c: c0 e5 00 28 db 4c brasl %r14,62e924 113292: b2 b1 00 00 stfl 0 To fix the problem we now clear the S390_lowcore.stfl_fac_list at startup in "head.S" for all machine types before lowcore protection is enabled. In addition to that the "=m" constraint is replaced by "+m". Signed-off-by: Michael Holzheu Signed-off-by: Martin Schwidefsky --- arch/s390/include/asm/facility.h | 3 +-- arch/s390/kernel/head.S | 2 +- 2 files changed, 2 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/s390/include/asm/facility.h b/arch/s390/include/asm/facility.h index 1e5b27edc0c..2ee66a65f2d 100644 --- a/arch/s390/include/asm/facility.h +++ b/arch/s390/include/asm/facility.h @@ -38,12 +38,11 @@ static inline void stfle(u64 *stfle_fac_list, int size) unsigned long nr; preempt_disable(); - S390_lowcore.stfl_fac_list = 0; asm volatile( " .insn s,0xb2b10000,0(0)\n" /* stfl */ "0:\n" EX_TABLE(0b, 0b) - : "=m" (S390_lowcore.stfl_fac_list)); + : "+m" (S390_lowcore.stfl_fac_list)); nr = 4; /* bytes stored by stfl */ memcpy(stfle_fac_list, &S390_lowcore.stfl_fac_list, 4); if (S390_lowcore.stfl_fac_list & 0x01000000) { diff --git a/arch/s390/kernel/head.S b/arch/s390/kernel/head.S index c27a0727f93..adccd908ebc 100644 --- a/arch/s390/kernel/head.S +++ b/arch/s390/kernel/head.S @@ -474,9 +474,9 @@ ENTRY(startup_kdump) stck __LC_LAST_UPDATE_CLOCK spt 5f-.LPG0(%r13) mvc __LC_LAST_UPDATE_TIMER(8),5f-.LPG0(%r13) + xc __LC_STFL_FAC_LIST(8),__LC_STFL_FAC_LIST #ifndef CONFIG_MARCH_G5 # check capabilities against MARCH_{G5,Z900,Z990,Z9_109,Z10} - xc __LC_STFL_FAC_LIST(8),__LC_STFL_FAC_LIST .insn s,0xb2b10000,__LC_STFL_FAC_LIST # store facility list tm __LC_STFL_FAC_LIST,0x01 # stfle available ? jz 0f -- cgit v1.2.3-70-g09d2 From affbb420239695018941173b63bf70551ede8b93 Mon Sep 17 00:00:00 2001 From: Martin Schwidefsky Date: Wed, 11 Apr 2012 14:28:12 +0200 Subject: [S390] Fix compile error in swab.h The inline assembly in__arch_swab16p causes compile errors of the form: *error*: *invalid* '*asm*': operand number missing after %-*letter* The assembly uses the %O/%R notation but the first operand misses the operand number, it needs to be "%O1" instead of "%O". Reported-by: Gil Peleg Signed-off-by: Martin Schwidefsky --- arch/s390/include/asm/swab.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/s390/include/asm/swab.h b/arch/s390/include/asm/swab.h index 6bdee21c077..a3e4ebb3209 100644 --- a/arch/s390/include/asm/swab.h +++ b/arch/s390/include/asm/swab.h @@ -77,7 +77,7 @@ static inline __u16 __arch_swab16p(const __u16 *x) asm volatile( #ifndef __s390x__ - " icm %0,2,%O+1(%R1)\n" + " icm %0,2,%O1+1(%R1)\n" " ic %0,%1\n" : "=&d" (result) : "Q" (*x) : "cc"); #else /* __s390x__ */ -- cgit v1.2.3-70-g09d2 From 92ae03f2ef99fbc23bfa9080d6b58f25227bd7ef Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Fri, 6 Apr 2012 14:32:32 -0700 Subject: x86: merge 32/64-bit versions of 'strncpy_from_user()' and speed it up This merges the 32- and 64-bit versions of the x86 strncpy_from_user() by just rewriting it in C rather than the ancient inline asm versions that used lodsb/stosb and had been duplicated for (trivial) differences between the 32-bit and 64-bit versions. While doing that, it also speeds them up by doing the accesses a word at a time. Finally, the new routines also properly handle the case of hitting the end of the address space, which we have never done correctly before (fs/namei.c has a hack around it for that reason). Despite all these improvements, it actually removes more lines than it adds, due to the de-duplication. Also, we no longer export (or define) the legacy __strncpy_from_user() function (that was defined to not do the user permission checks), since it's not actually used anywhere, and the user address space checks are built in to the new code. Other architecture maintainers have been notified that the old hack in fs/namei.c will be going away in the 3.5 merge window, in case they copied the x86 approach of being a bit cavalier about the end of the address space. Cc: linux-arch@vger.kernel.org Cc: Ingo Molnar Cc: Peter Anvin" Signed-off-by: Linus Torvalds --- arch/x86/include/asm/uaccess.h | 2 + arch/x86/include/asm/uaccess_32.h | 5 -- arch/x86/include/asm/uaccess_64.h | 4 -- arch/x86/lib/usercopy.c | 103 ++++++++++++++++++++++++++++++++++++++ arch/x86/lib/usercopy_32.c | 87 -------------------------------- arch/x86/lib/usercopy_64.c | 49 ------------------ 6 files changed, 105 insertions(+), 145 deletions(-) (limited to 'arch') diff --git a/arch/x86/include/asm/uaccess.h b/arch/x86/include/asm/uaccess.h index 8be5f54d936..e0544597cfe 100644 --- a/arch/x86/include/asm/uaccess.h +++ b/arch/x86/include/asm/uaccess.h @@ -557,6 +557,8 @@ struct __large_struct { unsigned long buf[100]; }; extern unsigned long copy_from_user_nmi(void *to, const void __user *from, unsigned long n); +extern __must_check long +strncpy_from_user(char *dst, const char __user *src, long count); /* * movsl can be slow when source and dest are not both 8-byte aligned diff --git a/arch/x86/include/asm/uaccess_32.h b/arch/x86/include/asm/uaccess_32.h index 566e803cc60..8084bc73b18 100644 --- a/arch/x86/include/asm/uaccess_32.h +++ b/arch/x86/include/asm/uaccess_32.h @@ -213,11 +213,6 @@ static inline unsigned long __must_check copy_from_user(void *to, return n; } -long __must_check strncpy_from_user(char *dst, const char __user *src, - long count); -long __must_check __strncpy_from_user(char *dst, - const char __user *src, long count); - /** * strlen_user: - Get the size of a string in user space. * @str: The string to measure. diff --git a/arch/x86/include/asm/uaccess_64.h b/arch/x86/include/asm/uaccess_64.h index 1c66d30971a..fcd4b6f3ef0 100644 --- a/arch/x86/include/asm/uaccess_64.h +++ b/arch/x86/include/asm/uaccess_64.h @@ -208,10 +208,6 @@ int __copy_in_user(void __user *dst, const void __user *src, unsigned size) } } -__must_check long -strncpy_from_user(char *dst, const char __user *src, long count); -__must_check long -__strncpy_from_user(char *dst, const char __user *src, long count); __must_check long strnlen_user(const char __user *str, long n); __must_check long __strnlen_user(const char __user *str, long n); __must_check long strlen_user(const char __user *str); diff --git a/arch/x86/lib/usercopy.c b/arch/x86/lib/usercopy.c index 97be9cb5448..57252c928f5 100644 --- a/arch/x86/lib/usercopy.c +++ b/arch/x86/lib/usercopy.c @@ -7,6 +7,8 @@ #include #include +#include + /* * best effort, GUP based copy_from_user() that is NMI-safe */ @@ -41,3 +43,104 @@ copy_from_user_nmi(void *to, const void __user *from, unsigned long n) return len; } EXPORT_SYMBOL_GPL(copy_from_user_nmi); + +static inline unsigned long count_bytes(unsigned long mask) +{ + mask = (mask - 1) & ~mask; + mask >>= 7; + return count_masked_bytes(mask); +} + +/* + * Do a strncpy, return length of string without final '\0'. + * 'count' is the user-supplied count (return 'count' if we + * hit it), 'max' is the address space maximum (and we return + * -EFAULT if we hit it). + */ +static inline long do_strncpy_from_user(char *dst, const char __user *src, long count, long max) +{ + long res = 0; + + /* + * Truncate 'max' to the user-specified limit, so that + * we only have one limit we need to check in the loop + */ + if (max > count) + max = count; + + while (max >= sizeof(unsigned long)) { + unsigned long c; + + /* Fall back to byte-at-a-time if we get a page fault */ + if (unlikely(__get_user(c,(unsigned long __user *)(src+res)))) + break; + /* This can write a few bytes past the NUL character, but that's ok */ + *(unsigned long *)(dst+res) = c; + c = has_zero(c); + if (c) + return res + count_bytes(c); + res += sizeof(unsigned long); + max -= sizeof(unsigned long); + } + + while (max) { + char c; + + if (unlikely(__get_user(c,src+res))) + return -EFAULT; + dst[res] = c; + if (!c) + return res; + res++; + max--; + } + + /* + * Uhhuh. We hit 'max'. But was that the user-specified maximum + * too? If so, that's ok - we got as much as the user asked for. + */ + if (res >= count) + return count; + + /* + * Nope: we hit the address space limit, and we still had more + * characters the caller would have wanted. That's an EFAULT. + */ + return -EFAULT; +} + +/** + * strncpy_from_user: - Copy a NUL terminated string from userspace. + * @dst: Destination address, in kernel space. This buffer must be at + * least @count bytes long. + * @src: Source address, in user space. + * @count: Maximum number of bytes to copy, including the trailing NUL. + * + * Copies a NUL-terminated string from userspace to kernel space. + * + * On success, returns the length of the string (not including the trailing + * NUL). + * + * If access to userspace fails, returns -EFAULT (some data may have been + * copied). + * + * If @count is smaller than the length of the string, copies @count bytes + * and returns @count. + */ +long +strncpy_from_user(char *dst, const char __user *src, long count) +{ + unsigned long max_addr, src_addr; + + if (unlikely(count <= 0)) + return 0; + + max_addr = current_thread_info()->addr_limit.seg; + src_addr = (unsigned long)src; + if (likely(src_addr < max_addr)) { + unsigned long max = max_addr - src_addr; + return do_strncpy_from_user(dst, src, count, max); + } + return -EFAULT; +} +EXPORT_SYMBOL(strncpy_from_user); diff --git a/arch/x86/lib/usercopy_32.c b/arch/x86/lib/usercopy_32.c index d9b094ca7aa..ef2a6a5d78e 100644 --- a/arch/x86/lib/usercopy_32.c +++ b/arch/x86/lib/usercopy_32.c @@ -32,93 +32,6 @@ static inline int __movsl_is_ok(unsigned long a1, unsigned long a2, unsigned lon #define movsl_is_ok(a1, a2, n) \ __movsl_is_ok((unsigned long)(a1), (unsigned long)(a2), (n)) -/* - * Copy a null terminated string from userspace. - */ - -#define __do_strncpy_from_user(dst, src, count, res) \ -do { \ - int __d0, __d1, __d2; \ - might_fault(); \ - __asm__ __volatile__( \ - " testl %1,%1\n" \ - " jz 2f\n" \ - "0: lodsb\n" \ - " stosb\n" \ - " testb %%al,%%al\n" \ - " jz 1f\n" \ - " decl %1\n" \ - " jnz 0b\n" \ - "1: subl %1,%0\n" \ - "2:\n" \ - ".section .fixup,\"ax\"\n" \ - "3: movl %5,%0\n" \ - " jmp 2b\n" \ - ".previous\n" \ - _ASM_EXTABLE(0b,3b) \ - : "=&d"(res), "=&c"(count), "=&a" (__d0), "=&S" (__d1), \ - "=&D" (__d2) \ - : "i"(-EFAULT), "0"(count), "1"(count), "3"(src), "4"(dst) \ - : "memory"); \ -} while (0) - -/** - * __strncpy_from_user: - Copy a NUL terminated string from userspace, with less checking. - * @dst: Destination address, in kernel space. This buffer must be at - * least @count bytes long. - * @src: Source address, in user space. - * @count: Maximum number of bytes to copy, including the trailing NUL. - * - * Copies a NUL-terminated string from userspace to kernel space. - * Caller must check the specified block with access_ok() before calling - * this function. - * - * On success, returns the length of the string (not including the trailing - * NUL). - * - * If access to userspace fails, returns -EFAULT (some data may have been - * copied). - * - * If @count is smaller than the length of the string, copies @count bytes - * and returns @count. - */ -long -__strncpy_from_user(char *dst, const char __user *src, long count) -{ - long res; - __do_strncpy_from_user(dst, src, count, res); - return res; -} -EXPORT_SYMBOL(__strncpy_from_user); - -/** - * strncpy_from_user: - Copy a NUL terminated string from userspace. - * @dst: Destination address, in kernel space. This buffer must be at - * least @count bytes long. - * @src: Source address, in user space. - * @count: Maximum number of bytes to copy, including the trailing NUL. - * - * Copies a NUL-terminated string from userspace to kernel space. - * - * On success, returns the length of the string (not including the trailing - * NUL). - * - * If access to userspace fails, returns -EFAULT (some data may have been - * copied). - * - * If @count is smaller than the length of the string, copies @count bytes - * and returns @count. - */ -long -strncpy_from_user(char *dst, const char __user *src, long count) -{ - long res = -EFAULT; - if (access_ok(VERIFY_READ, src, 1)) - __do_strncpy_from_user(dst, src, count, res); - return res; -} -EXPORT_SYMBOL(strncpy_from_user); - /* * Zero Userspace */ diff --git a/arch/x86/lib/usercopy_64.c b/arch/x86/lib/usercopy_64.c index b7c2849ffb6..0d0326f388c 100644 --- a/arch/x86/lib/usercopy_64.c +++ b/arch/x86/lib/usercopy_64.c @@ -8,55 +8,6 @@ #include #include -/* - * Copy a null terminated string from userspace. - */ - -#define __do_strncpy_from_user(dst,src,count,res) \ -do { \ - long __d0, __d1, __d2; \ - might_fault(); \ - __asm__ __volatile__( \ - " testq %1,%1\n" \ - " jz 2f\n" \ - "0: lodsb\n" \ - " stosb\n" \ - " testb %%al,%%al\n" \ - " jz 1f\n" \ - " decq %1\n" \ - " jnz 0b\n" \ - "1: subq %1,%0\n" \ - "2:\n" \ - ".section .fixup,\"ax\"\n" \ - "3: movq %5,%0\n" \ - " jmp 2b\n" \ - ".previous\n" \ - _ASM_EXTABLE(0b,3b) \ - : "=&r"(res), "=&c"(count), "=&a" (__d0), "=&S" (__d1), \ - "=&D" (__d2) \ - : "i"(-EFAULT), "0"(count), "1"(count), "3"(src), "4"(dst) \ - : "memory"); \ -} while (0) - -long -__strncpy_from_user(char *dst, const char __user *src, long count) -{ - long res; - __do_strncpy_from_user(dst, src, count, res); - return res; -} -EXPORT_SYMBOL(__strncpy_from_user); - -long -strncpy_from_user(char *dst, const char __user *src, long count) -{ - long res = -EFAULT; - if (access_ok(VERIFY_READ, src, 1)) - return __strncpy_from_user(dst, src, count); - return res; -} -EXPORT_SYMBOL(strncpy_from_user); - /* * Zero Userspace */ -- cgit v1.2.3-70-g09d2 From e72d5c7e9c831f6e393c71dcd62acafbac2b58d0 Mon Sep 17 00:00:00 2001 From: Chris Metcalf Date: Wed, 11 Apr 2012 12:45:20 -0400 Subject: arch/tile: avoid unused variable warning in proc.c for tilegx Until we push the unaligned access support for tilegx, it's silly to have arch/tile/kernel/proc.c generate a warning about an unused variable. Extend the #ifdef to cover all the code and data for now. Signed-off-by: Chris Metcalf --- arch/tile/kernel/proc.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/tile/kernel/proc.c b/arch/tile/kernel/proc.c index 7a932704640..446a7f52cc1 100644 --- a/arch/tile/kernel/proc.c +++ b/arch/tile/kernel/proc.c @@ -146,7 +146,6 @@ static ctl_table unaligned_table[] = { }, {} }; -#endif static struct ctl_path tile_path[] = { { .procname = "tile" }, @@ -155,10 +154,9 @@ static struct ctl_path tile_path[] = { static int __init proc_sys_tile_init(void) { -#ifndef __tilegx__ /* FIXME: GX: no support for unaligned access yet */ register_sysctl_paths(tile_path, unaligned_table); -#endif return 0; } arch_initcall(proc_sys_tile_init); +#endif -- cgit v1.2.3-70-g09d2 From 6fa6c8e25e95bdc73e92e4c96b8e3299169b616e Mon Sep 17 00:00:00 2001 From: Grant Likely Date: Wed, 15 Feb 2012 15:06:08 -0700 Subject: irq_domain: Move irq_virq_count into NOMAP revmap This patch replaces the old global setting of irq_virq_count that is only used by the NOMAP mapping and instead uses a revmap_data property so that the maximum NOMAP allocation can be set per NOMAP irq_domain. There is exactly one user of irq_virq_count in-tree right now: PS3. Also, irq_virq_count is only useful for the NOMAP mapping. So, instead of having a single global irq_virq_count values, this change drops it entirely and added a max_irq argument to irq_domain_add_nomap(). That makes it a property of an individual nomap irq domain instead of a global system settting. Signed-off-by: Grant Likely Tested-by: Benjamin Herrenschmidt Cc: Thomas Gleixner Cc: Milton Miller --- arch/powerpc/platforms/cell/axon_msi.c | 2 +- arch/powerpc/platforms/cell/beat_interrupt.c | 2 +- arch/powerpc/platforms/powermac/smp.c | 2 +- arch/powerpc/platforms/ps3/interrupt.c | 3 +-- include/linux/irqdomain.h | 6 +++-- kernel/irq/irqdomain.c | 33 ++++++++-------------------- 6 files changed, 17 insertions(+), 31 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/platforms/cell/axon_msi.c b/arch/powerpc/platforms/cell/axon_msi.c index db360fc4cf0..d09f3e8e686 100644 --- a/arch/powerpc/platforms/cell/axon_msi.c +++ b/arch/powerpc/platforms/cell/axon_msi.c @@ -392,7 +392,7 @@ static int axon_msi_probe(struct platform_device *device) } memset(msic->fifo_virt, 0xff, MSIC_FIFO_SIZE_BYTES); - msic->irq_domain = irq_domain_add_nomap(dn, &msic_host_ops, msic); + msic->irq_domain = irq_domain_add_nomap(dn, 0, &msic_host_ops, msic); if (!msic->irq_domain) { printk(KERN_ERR "axon_msi: couldn't allocate irq_domain for %s\n", dn->full_name); diff --git a/arch/powerpc/platforms/cell/beat_interrupt.c b/arch/powerpc/platforms/cell/beat_interrupt.c index e5c3a2c6090..f9a48af335c 100644 --- a/arch/powerpc/platforms/cell/beat_interrupt.c +++ b/arch/powerpc/platforms/cell/beat_interrupt.c @@ -239,7 +239,7 @@ void __init beatic_init_IRQ(void) ppc_md.get_irq = beatic_get_irq; /* Allocate an irq host */ - beatic_host = irq_domain_add_nomap(NULL, &beatic_pic_host_ops, NULL); + beatic_host = irq_domain_add_nomap(NULL, 0, &beatic_pic_host_ops, NULL); BUG_ON(beatic_host == NULL); irq_set_default_host(beatic_host); } diff --git a/arch/powerpc/platforms/powermac/smp.c b/arch/powerpc/platforms/powermac/smp.c index a81e5a88fbd..b4ddaa3fbb2 100644 --- a/arch/powerpc/platforms/powermac/smp.c +++ b/arch/powerpc/platforms/powermac/smp.c @@ -192,7 +192,7 @@ static int psurge_secondary_ipi_init(void) { int rc = -ENOMEM; - psurge_host = irq_domain_add_nomap(NULL, &psurge_host_ops, NULL); + psurge_host = irq_domain_add_nomap(NULL, 0, &psurge_host_ops, NULL); if (psurge_host) psurge_secondary_virq = irq_create_direct_mapping(psurge_host); diff --git a/arch/powerpc/platforms/ps3/interrupt.c b/arch/powerpc/platforms/ps3/interrupt.c index 2a4ff86cc21..5f3b23220b8 100644 --- a/arch/powerpc/platforms/ps3/interrupt.c +++ b/arch/powerpc/platforms/ps3/interrupt.c @@ -753,9 +753,8 @@ void __init ps3_init_IRQ(void) unsigned cpu; struct irq_domain *host; - host = irq_domain_add_nomap(NULL, &ps3_host_ops, NULL); + host = irq_domain_add_nomap(NULL, PS3_PLUG_MAX + 1, &ps3_host_ops, NULL); irq_set_default_host(host); - irq_set_virq_count(PS3_PLUG_MAX + 1); for_each_possible_cpu(cpu) { struct ps3_private *pd = &per_cpu(ps3_private, cpu); diff --git a/include/linux/irqdomain.h b/include/linux/irqdomain.h index ac17b9b2e7b..c65740d76e6 100644 --- a/include/linux/irqdomain.h +++ b/include/linux/irqdomain.h @@ -98,6 +98,9 @@ struct irq_domain { unsigned int size; unsigned int *revmap; } linear; + struct { + unsigned int max_irq; + } nomap; struct radix_tree_root tree; } revmap_data; const struct irq_domain_ops *ops; @@ -120,6 +123,7 @@ struct irq_domain *irq_domain_add_linear(struct device_node *of_node, const struct irq_domain_ops *ops, void *host_data); struct irq_domain *irq_domain_add_nomap(struct device_node *of_node, + unsigned int max_irq, const struct irq_domain_ops *ops, void *host_data); struct irq_domain *irq_domain_add_tree(struct device_node *of_node, @@ -128,7 +132,6 @@ struct irq_domain *irq_domain_add_tree(struct device_node *of_node, extern struct irq_domain *irq_find_host(struct device_node *node); extern void irq_set_default_host(struct irq_domain *host); -extern void irq_set_virq_count(unsigned int count); static inline struct irq_domain *irq_domain_add_legacy_isa( struct device_node *of_node, @@ -140,7 +143,6 @@ static inline struct irq_domain *irq_domain_add_legacy_isa( } extern struct irq_domain *irq_find_host(struct device_node *node); extern void irq_set_default_host(struct irq_domain *host); -extern void irq_set_virq_count(unsigned int count); extern unsigned int irq_create_mapping(struct irq_domain *host, diff --git a/kernel/irq/irqdomain.c b/kernel/irq/irqdomain.c index eb05e40f455..d34413e7862 100644 --- a/kernel/irq/irqdomain.c +++ b/kernel/irq/irqdomain.c @@ -23,7 +23,6 @@ static LIST_HEAD(irq_domain_list); static DEFINE_MUTEX(irq_domain_mutex); static DEFINE_MUTEX(revmap_trees_mutex); -static unsigned int irq_virq_count = NR_IRQS; static struct irq_domain *irq_default_domain; /** @@ -184,13 +183,16 @@ struct irq_domain *irq_domain_add_linear(struct device_node *of_node, } struct irq_domain *irq_domain_add_nomap(struct device_node *of_node, + unsigned int max_irq, const struct irq_domain_ops *ops, void *host_data) { struct irq_domain *domain = irq_domain_alloc(of_node, IRQ_DOMAIN_MAP_NOMAP, ops, host_data); - if (domain) + if (domain) { + domain->revmap_data.nomap.max_irq = max_irq ? max_irq : ~0; irq_domain_add(domain); + } return domain; } @@ -262,22 +264,6 @@ void irq_set_default_host(struct irq_domain *domain) irq_default_domain = domain; } -/** - * irq_set_virq_count() - Set the maximum number of linux irqs - * @count: number of linux irqs, capped with NR_IRQS - * - * This is mainly for use by platforms like iSeries who want to program - * the virtual irq number in the controller to avoid the reverse mapping - */ -void irq_set_virq_count(unsigned int count) -{ - pr_debug("irq: Trying to set virq count to %d\n", count); - - BUG_ON(count < NUM_ISA_INTERRUPTS); - if (count < NR_IRQS) - irq_virq_count = count; -} - static int irq_setup_virq(struct irq_domain *domain, unsigned int virq, irq_hw_number_t hwirq) { @@ -320,13 +306,12 @@ unsigned int irq_create_direct_mapping(struct irq_domain *domain) pr_debug("irq: create_direct virq allocation failed\n"); return 0; } - if (virq >= irq_virq_count) { + if (virq >= domain->revmap_data.nomap.max_irq) { pr_err("ERROR: no free irqs available below %i maximum\n", - irq_virq_count); + domain->revmap_data.nomap.max_irq); irq_free_desc(virq); return 0; } - pr_debug("irq: create_direct obtained virq %d\n", virq); if (irq_setup_virq(domain, virq, virq)) { @@ -378,7 +363,7 @@ unsigned int irq_create_mapping(struct irq_domain *domain, return irq_domain_legacy_revmap(domain, hwirq); /* Allocate a virtual interrupt number */ - hint = hwirq % irq_virq_count; + hint = hwirq % nr_irqs; if (hint == 0) hint++; virq = irq_alloc_desc_from(hint, 0); @@ -516,7 +501,7 @@ unsigned int irq_find_mapping(struct irq_domain *domain, irq_hw_number_t hwirq) { unsigned int i; - unsigned int hint = hwirq % irq_virq_count; + unsigned int hint = hwirq % nr_irqs; /* Look for default domain if nececssary */ if (domain == NULL) @@ -537,7 +522,7 @@ unsigned int irq_find_mapping(struct irq_domain *domain, if (data && (data->domain == domain) && (data->hwirq == hwirq)) return i; i++; - if (i >= irq_virq_count) + if (i >= nr_irqs) i = 1; } while(i != hint); return 0; -- cgit v1.2.3-70-g09d2 From 9c5fd9e85f574d9d0361b2b878f55732290afe5b Mon Sep 17 00:00:00 2001 From: Marc Zyngier Date: Wed, 11 Apr 2012 14:52:55 +0100 Subject: ARM: 7379/1: DT: fix atags_to_fdt() second call site atags_to_fdt() returns 1 when it fails to find a valid FDT signature. The CONFIG_ARM_ATAG_DTB_COMPAT code is supposed to retry with another location, but only does so when the initial call doesn't fail. Fix this by using the correct condition in the assembly code. Acked-by: Nicolas Pitre Signed-off-by: Marc Zyngier Cc: stable@vger.kernel.org Signed-off-by: Russell King --- arch/arm/boot/compressed/head.S | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S index 5f6045f1766..dc7e8ce8e6b 100644 --- a/arch/arm/boot/compressed/head.S +++ b/arch/arm/boot/compressed/head.S @@ -273,7 +273,7 @@ restart: adr r0, LC0 add r0, r0, #0x100 mov r1, r6 sub r2, sp, r6 - blne atags_to_fdt + bleq atags_to_fdt ldmfd sp!, {r0-r3, ip, lr} sub sp, sp, #0x10000 -- cgit v1.2.3-70-g09d2 From a106b21a352517b57af1c3581e15b8787ffe4e98 Mon Sep 17 00:00:00 2001 From: Marc Zyngier Date: Wed, 11 Apr 2012 14:52:56 +0100 Subject: ARM: 7380/1: DT: do not add a zero-sized memory property Some bootloaders are broken enough to expose an ATAG_MEM with a null size. Converting such tag to a memory node leads to an unbootable system. Skip over zero sized ATAG_MEM to avoid this situation. Acked-by: Nicolas Pitre Signed-off-by: Marc Zyngier Signed-off-by: Russell King --- arch/arm/boot/compressed/atags_to_fdt.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/compressed/atags_to_fdt.c b/arch/arm/boot/compressed/atags_to_fdt.c index 6ce11c48117..797f04bedb4 100644 --- a/arch/arm/boot/compressed/atags_to_fdt.c +++ b/arch/arm/boot/compressed/atags_to_fdt.c @@ -77,6 +77,8 @@ int atags_to_fdt(void *atag_list, void *fdt, int total_space) } else if (atag->hdr.tag == ATAG_MEM) { if (memcount >= sizeof(mem_reg_property)/4) continue; + if (!atag->u.mem.size) + continue; mem_reg_property[memcount++] = cpu_to_fdt32(atag->u.mem.start); mem_reg_property[memcount++] = cpu_to_fdt32(atag->u.mem.size); } else if (atag->hdr.tag == ATAG_INITRD2) { -- cgit v1.2.3-70-g09d2 From 9b7333a9c1c22409f685ff6bb6a9e3638e7ff06f Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Thu, 12 Apr 2012 17:12:37 +0100 Subject: ARM: 7381/1: nommu: fix typo in mm/Kconfig The description for the CPU_HIGH_VECTOR Kconfig option for nommu builds doesn't make any sense. This patch fixes up the trivial grammatical error. Signed-off-by: Will Deacon Signed-off-by: Russell King --- arch/arm/mm/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig index 7edef912163..7c8a7d8467b 100644 --- a/arch/arm/mm/Kconfig +++ b/arch/arm/mm/Kconfig @@ -723,7 +723,7 @@ config CPU_HIGH_VECTOR bool "Select the High exception vector" help Say Y here to select high exception vector(0xFFFF0000~). - The exception vector can be vary depending on the platform + The exception vector can vary depending on the platform design in nommu mode. If your platform needs to select high exception vector, say Y. Otherwise or if you are unsure, say N, and the low exception -- cgit v1.2.3-70-g09d2 From 6b8e5c912f4294611351aba151324764ebbefa1b Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Thu, 12 Apr 2012 17:16:01 +0100 Subject: ARM: 7383/1: nommu: populate vectors page from paging_init Commit 94e5a85b ("ARM: earlier initialization of vectors page") made it the responsibility of paging_init to initialise the vectors page. This patch adds a call to early_trap_init for the !CONFIG_MMU case, placing the vectors at CONFIG_VECTORS_BASE. Cc: Jonathan Austin Signed-off-by: Will Deacon Signed-off-by: Russell King --- arch/arm/mm/nommu.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch') diff --git a/arch/arm/mm/nommu.c b/arch/arm/mm/nommu.c index 6486d2f253c..d51225f90ae 100644 --- a/arch/arm/mm/nommu.c +++ b/arch/arm/mm/nommu.c @@ -13,6 +13,7 @@ #include #include #include +#include #include #include "mm.h" @@ -39,6 +40,7 @@ void __init sanity_check_meminfo(void) */ void __init paging_init(struct machine_desc *mdesc) { + early_trap_init((void *)CONFIG_VECTORS_BASE); bootmem_init(); } -- cgit v1.2.3-70-g09d2 From 5ba840f9da1ff96e0c6e982608a9e80e35333cc5 Mon Sep 17 00:00:00 2001 From: Paul Gortmaker Date: Mon, 2 Apr 2012 16:04:13 -0400 Subject: alpha: fix build failures from system.h dismemberment commit ec2212088c42ff7d1362629ec26dda4f3e8bdad3 "Disintegrate asm/system.h for Alpha" combined with commit b4816afa3986704d1404fc48e931da5135820472 "Move the asm-generic/system.h xchg() implementation to asm-generic/cmpxchg.h" introduced the concept of asm/cmpxchg.h but the alpha arch never got one. Fork the cmpxchg content out of the asm/atomic.h file to create one. Some minor whitespace fixups were done on the block of code that created the new file. Cc: Richard Henderson Cc: Ivan Kokshaysky Cc: Matt Turner Cc: David Howells Acked-by: Matt Turner Signed-off-by: Paul Gortmaker --- arch/alpha/include/asm/atomic.h | 68 +------------------------------------- arch/alpha/include/asm/cmpxchg.h | 71 ++++++++++++++++++++++++++++++++++++++++ arch/alpha/include/asm/xchg.h | 4 +-- 3 files changed, 74 insertions(+), 69 deletions(-) create mode 100644 arch/alpha/include/asm/cmpxchg.h (limited to 'arch') diff --git a/arch/alpha/include/asm/atomic.h b/arch/alpha/include/asm/atomic.h index f62251e82ff..3bb7ffeae3b 100644 --- a/arch/alpha/include/asm/atomic.h +++ b/arch/alpha/include/asm/atomic.h @@ -3,6 +3,7 @@ #include #include +#include /* * Atomic operations that C can't guarantee us. Useful for @@ -168,73 +169,6 @@ static __inline__ long atomic64_sub_return(long i, atomic64_t * v) return result; } -/* - * Atomic exchange routines. - */ - -#define __ASM__MB -#define ____xchg(type, args...) __xchg ## type ## _local(args) -#define ____cmpxchg(type, args...) __cmpxchg ## type ## _local(args) -#include - -#define xchg_local(ptr,x) \ - ({ \ - __typeof__(*(ptr)) _x_ = (x); \ - (__typeof__(*(ptr))) __xchg_local((ptr), (unsigned long)_x_, \ - sizeof(*(ptr))); \ - }) - -#define cmpxchg_local(ptr, o, n) \ - ({ \ - __typeof__(*(ptr)) _o_ = (o); \ - __typeof__(*(ptr)) _n_ = (n); \ - (__typeof__(*(ptr))) __cmpxchg_local((ptr), (unsigned long)_o_, \ - (unsigned long)_n_, \ - sizeof(*(ptr))); \ - }) - -#define cmpxchg64_local(ptr, o, n) \ - ({ \ - BUILD_BUG_ON(sizeof(*(ptr)) != 8); \ - cmpxchg_local((ptr), (o), (n)); \ - }) - -#ifdef CONFIG_SMP -#undef __ASM__MB -#define __ASM__MB "\tmb\n" -#endif -#undef ____xchg -#undef ____cmpxchg -#define ____xchg(type, args...) __xchg ##type(args) -#define ____cmpxchg(type, args...) __cmpxchg ##type(args) -#include - -#define xchg(ptr,x) \ - ({ \ - __typeof__(*(ptr)) _x_ = (x); \ - (__typeof__(*(ptr))) __xchg((ptr), (unsigned long)_x_, \ - sizeof(*(ptr))); \ - }) - -#define cmpxchg(ptr, o, n) \ - ({ \ - __typeof__(*(ptr)) _o_ = (o); \ - __typeof__(*(ptr)) _n_ = (n); \ - (__typeof__(*(ptr))) __cmpxchg((ptr), (unsigned long)_o_, \ - (unsigned long)_n_, sizeof(*(ptr)));\ - }) - -#define cmpxchg64(ptr, o, n) \ - ({ \ - BUILD_BUG_ON(sizeof(*(ptr)) != 8); \ - cmpxchg((ptr), (o), (n)); \ - }) - -#undef __ASM__MB -#undef ____cmpxchg - -#define __HAVE_ARCH_CMPXCHG 1 - #define atomic64_cmpxchg(v, old, new) (cmpxchg(&((v)->counter), old, new)) #define atomic64_xchg(v, new) (xchg(&((v)->counter), new)) diff --git a/arch/alpha/include/asm/cmpxchg.h b/arch/alpha/include/asm/cmpxchg.h new file mode 100644 index 00000000000..429e8cd0d78 --- /dev/null +++ b/arch/alpha/include/asm/cmpxchg.h @@ -0,0 +1,71 @@ +#ifndef _ALPHA_CMPXCHG_H +#define _ALPHA_CMPXCHG_H + +/* + * Atomic exchange routines. + */ + +#define __ASM__MB +#define ____xchg(type, args...) __xchg ## type ## _local(args) +#define ____cmpxchg(type, args...) __cmpxchg ## type ## _local(args) +#include + +#define xchg_local(ptr, x) \ +({ \ + __typeof__(*(ptr)) _x_ = (x); \ + (__typeof__(*(ptr))) __xchg_local((ptr), (unsigned long)_x_, \ + sizeof(*(ptr))); \ +}) + +#define cmpxchg_local(ptr, o, n) \ +({ \ + __typeof__(*(ptr)) _o_ = (o); \ + __typeof__(*(ptr)) _n_ = (n); \ + (__typeof__(*(ptr))) __cmpxchg_local((ptr), (unsigned long)_o_, \ + (unsigned long)_n_, \ + sizeof(*(ptr))); \ +}) + +#define cmpxchg64_local(ptr, o, n) \ +({ \ + BUILD_BUG_ON(sizeof(*(ptr)) != 8); \ + cmpxchg_local((ptr), (o), (n)); \ +}) + +#ifdef CONFIG_SMP +#undef __ASM__MB +#define __ASM__MB "\tmb\n" +#endif +#undef ____xchg +#undef ____cmpxchg +#define ____xchg(type, args...) __xchg ##type(args) +#define ____cmpxchg(type, args...) __cmpxchg ##type(args) +#include + +#define xchg(ptr, x) \ +({ \ + __typeof__(*(ptr)) _x_ = (x); \ + (__typeof__(*(ptr))) __xchg((ptr), (unsigned long)_x_, \ + sizeof(*(ptr))); \ +}) + +#define cmpxchg(ptr, o, n) \ +({ \ + __typeof__(*(ptr)) _o_ = (o); \ + __typeof__(*(ptr)) _n_ = (n); \ + (__typeof__(*(ptr))) __cmpxchg((ptr), (unsigned long)_o_, \ + (unsigned long)_n_, sizeof(*(ptr)));\ +}) + +#define cmpxchg64(ptr, o, n) \ +({ \ + BUILD_BUG_ON(sizeof(*(ptr)) != 8); \ + cmpxchg((ptr), (o), (n)); \ +}) + +#undef __ASM__MB +#undef ____cmpxchg + +#define __HAVE_ARCH_CMPXCHG 1 + +#endif /* _ALPHA_CMPXCHG_H */ diff --git a/arch/alpha/include/asm/xchg.h b/arch/alpha/include/asm/xchg.h index 1d1b436fbff..0ca9724597c 100644 --- a/arch/alpha/include/asm/xchg.h +++ b/arch/alpha/include/asm/xchg.h @@ -1,10 +1,10 @@ -#ifndef _ALPHA_ATOMIC_H +#ifndef _ALPHA_CMPXCHG_H #error Do not include xchg.h directly! #else /* * xchg/xchg_local and cmpxchg/cmpxchg_local share the same code * except that local version do not have the expensive memory barrier. - * So this file is included twice from asm/system.h. + * So this file is included twice from asm/cmpxchg.h. */ /* -- cgit v1.2.3-70-g09d2 From 85f8f7759e418c814ee2ceacf73eddb9bed39492 Mon Sep 17 00:00:00 2001 From: Paul Gortmaker Date: Tue, 3 Apr 2012 13:51:35 -0400 Subject: ia64: populate the cmpxchg header with appropriate code commit 93f378883cecb9dcb2cf5b51d9d24175906659da "Fix ia64 build errors (fallout from system.h disintegration)" introduced arch/ia64/include/asm/cmpxchg.h as a temporary build fix and stated: "... leave the migration of xchg() and cmpxchg() to this new header file for a future patch." Migrate the appropriate chunks from asm/intrinsics.h and fix the whitespace issues in the migrated chunk. Cc: Fenghua Yu Cc: David Howells Acked-by: Tony Luck Signed-off-by: Paul Gortmaker --- arch/ia64/include/asm/cmpxchg.h | 148 ++++++++++++++++++++++++++++++++++++- arch/ia64/include/asm/intrinsics.h | 114 +--------------------------- 2 files changed, 148 insertions(+), 114 deletions(-) (limited to 'arch') diff --git a/arch/ia64/include/asm/cmpxchg.h b/arch/ia64/include/asm/cmpxchg.h index 4c96187e204..4f37dbbb864 100644 --- a/arch/ia64/include/asm/cmpxchg.h +++ b/arch/ia64/include/asm/cmpxchg.h @@ -1 +1,147 @@ -#include +#ifndef _ASM_IA64_CMPXCHG_H +#define _ASM_IA64_CMPXCHG_H + +/* + * Compare/Exchange, forked from asm/intrinsics.h + * which was: + * + * Copyright (C) 2002-2003 Hewlett-Packard Co + * David Mosberger-Tang + */ + +#ifndef __ASSEMBLY__ + +#include +/* include compiler specific intrinsics */ +#include +#ifdef __INTEL_COMPILER +# include +#else +# include +#endif + +/* + * This function doesn't exist, so you'll get a linker error if + * something tries to do an invalid xchg(). + */ +extern void ia64_xchg_called_with_bad_pointer(void); + +#define __xchg(x, ptr, size) \ +({ \ + unsigned long __xchg_result; \ + \ + switch (size) { \ + case 1: \ + __xchg_result = ia64_xchg1((__u8 *)ptr, x); \ + break; \ + \ + case 2: \ + __xchg_result = ia64_xchg2((__u16 *)ptr, x); \ + break; \ + \ + case 4: \ + __xchg_result = ia64_xchg4((__u32 *)ptr, x); \ + break; \ + \ + case 8: \ + __xchg_result = ia64_xchg8((__u64 *)ptr, x); \ + break; \ + default: \ + ia64_xchg_called_with_bad_pointer(); \ + } \ + __xchg_result; \ +}) + +#define xchg(ptr, x) \ +((__typeof__(*(ptr))) __xchg((unsigned long) (x), (ptr), sizeof(*(ptr)))) + +/* + * Atomic compare and exchange. Compare OLD with MEM, if identical, + * store NEW in MEM. Return the initial value in MEM. Success is + * indicated by comparing RETURN with OLD. + */ + +#define __HAVE_ARCH_CMPXCHG 1 + +/* + * This function doesn't exist, so you'll get a linker error + * if something tries to do an invalid cmpxchg(). + */ +extern long ia64_cmpxchg_called_with_bad_pointer(void); + +#define ia64_cmpxchg(sem, ptr, old, new, size) \ +({ \ + __u64 _o_, _r_; \ + \ + switch (size) { \ + case 1: \ + _o_ = (__u8) (long) (old); \ + break; \ + case 2: \ + _o_ = (__u16) (long) (old); \ + break; \ + case 4: \ + _o_ = (__u32) (long) (old); \ + break; \ + case 8: \ + _o_ = (__u64) (long) (old); \ + break; \ + default: \ + break; \ + } \ + switch (size) { \ + case 1: \ + _r_ = ia64_cmpxchg1_##sem((__u8 *) ptr, new, _o_); \ + break; \ + \ + case 2: \ + _r_ = ia64_cmpxchg2_##sem((__u16 *) ptr, new, _o_); \ + break; \ + \ + case 4: \ + _r_ = ia64_cmpxchg4_##sem((__u32 *) ptr, new, _o_); \ + break; \ + \ + case 8: \ + _r_ = ia64_cmpxchg8_##sem((__u64 *) ptr, new, _o_); \ + break; \ + \ + default: \ + _r_ = ia64_cmpxchg_called_with_bad_pointer(); \ + break; \ + } \ + (__typeof__(old)) _r_; \ +}) + +#define cmpxchg_acq(ptr, o, n) \ + ia64_cmpxchg(acq, (ptr), (o), (n), sizeof(*(ptr))) +#define cmpxchg_rel(ptr, o, n) \ + ia64_cmpxchg(rel, (ptr), (o), (n), sizeof(*(ptr))) + +/* for compatibility with other platforms: */ +#define cmpxchg(ptr, o, n) cmpxchg_acq((ptr), (o), (n)) +#define cmpxchg64(ptr, o, n) cmpxchg_acq((ptr), (o), (n)) + +#define cmpxchg_local cmpxchg +#define cmpxchg64_local cmpxchg64 + +#ifdef CONFIG_IA64_DEBUG_CMPXCHG +# define CMPXCHG_BUGCHECK_DECL int _cmpxchg_bugcheck_count = 128; +# define CMPXCHG_BUGCHECK(v) \ +do { \ + if (_cmpxchg_bugcheck_count-- <= 0) { \ + void *ip; \ + extern int printk(const char *fmt, ...); \ + ip = (void *) ia64_getreg(_IA64_REG_IP); \ + printk("CMPXCHG_BUGCHECK: stuck at %p on word %p\n", ip, (v));\ + break; \ + } \ +} while (0) +#else /* !CONFIG_IA64_DEBUG_CMPXCHG */ +# define CMPXCHG_BUGCHECK_DECL +# define CMPXCHG_BUGCHECK(v) +#endif /* !CONFIG_IA64_DEBUG_CMPXCHG */ + +#endif /* !__ASSEMBLY__ */ + +#endif /* _ASM_IA64_CMPXCHG_H */ diff --git a/arch/ia64/include/asm/intrinsics.h b/arch/ia64/include/asm/intrinsics.h index e4076b51182..d129e367e76 100644 --- a/arch/ia64/include/asm/intrinsics.h +++ b/arch/ia64/include/asm/intrinsics.h @@ -18,6 +18,7 @@ #else # include #endif +#include #define ia64_native_get_psr_i() (ia64_native_getreg(_IA64_REG_PSR) & IA64_PSR_I) @@ -81,119 +82,6 @@ extern unsigned long __bad_increment_for_ia64_fetch_and_add (void); #define ia64_fetch_and_add(i,v) (ia64_fetchadd(i, v, rel) + (i)) /* return new value */ -/* - * This function doesn't exist, so you'll get a linker error if - * something tries to do an invalid xchg(). - */ -extern void ia64_xchg_called_with_bad_pointer (void); - -#define __xchg(x,ptr,size) \ -({ \ - unsigned long __xchg_result; \ - \ - switch (size) { \ - case 1: \ - __xchg_result = ia64_xchg1((__u8 *)ptr, x); \ - break; \ - \ - case 2: \ - __xchg_result = ia64_xchg2((__u16 *)ptr, x); \ - break; \ - \ - case 4: \ - __xchg_result = ia64_xchg4((__u32 *)ptr, x); \ - break; \ - \ - case 8: \ - __xchg_result = ia64_xchg8((__u64 *)ptr, x); \ - break; \ - default: \ - ia64_xchg_called_with_bad_pointer(); \ - } \ - __xchg_result; \ -}) - -#define xchg(ptr,x) \ - ((__typeof__(*(ptr))) __xchg ((unsigned long) (x), (ptr), sizeof(*(ptr)))) - -/* - * Atomic compare and exchange. Compare OLD with MEM, if identical, - * store NEW in MEM. Return the initial value in MEM. Success is - * indicated by comparing RETURN with OLD. - */ - -#define __HAVE_ARCH_CMPXCHG 1 - -/* - * This function doesn't exist, so you'll get a linker error - * if something tries to do an invalid cmpxchg(). - */ -extern long ia64_cmpxchg_called_with_bad_pointer (void); - -#define ia64_cmpxchg(sem,ptr,old,new,size) \ -({ \ - __u64 _o_, _r_; \ - \ - switch (size) { \ - case 1: _o_ = (__u8 ) (long) (old); break; \ - case 2: _o_ = (__u16) (long) (old); break; \ - case 4: _o_ = (__u32) (long) (old); break; \ - case 8: _o_ = (__u64) (long) (old); break; \ - default: break; \ - } \ - switch (size) { \ - case 1: \ - _r_ = ia64_cmpxchg1_##sem((__u8 *) ptr, new, _o_); \ - break; \ - \ - case 2: \ - _r_ = ia64_cmpxchg2_##sem((__u16 *) ptr, new, _o_); \ - break; \ - \ - case 4: \ - _r_ = ia64_cmpxchg4_##sem((__u32 *) ptr, new, _o_); \ - break; \ - \ - case 8: \ - _r_ = ia64_cmpxchg8_##sem((__u64 *) ptr, new, _o_); \ - break; \ - \ - default: \ - _r_ = ia64_cmpxchg_called_with_bad_pointer(); \ - break; \ - } \ - (__typeof__(old)) _r_; \ -}) - -#define cmpxchg_acq(ptr, o, n) \ - ia64_cmpxchg(acq, (ptr), (o), (n), sizeof(*(ptr))) -#define cmpxchg_rel(ptr, o, n) \ - ia64_cmpxchg(rel, (ptr), (o), (n), sizeof(*(ptr))) - -/* for compatibility with other platforms: */ -#define cmpxchg(ptr, o, n) cmpxchg_acq((ptr), (o), (n)) -#define cmpxchg64(ptr, o, n) cmpxchg_acq((ptr), (o), (n)) - -#define cmpxchg_local cmpxchg -#define cmpxchg64_local cmpxchg64 - -#ifdef CONFIG_IA64_DEBUG_CMPXCHG -# define CMPXCHG_BUGCHECK_DECL int _cmpxchg_bugcheck_count = 128; -# define CMPXCHG_BUGCHECK(v) \ - do { \ - if (_cmpxchg_bugcheck_count-- <= 0) { \ - void *ip; \ - extern int printk(const char *fmt, ...); \ - ip = (void *) ia64_getreg(_IA64_REG_IP); \ - printk("CMPXCHG_BUGCHECK: stuck at %p on word %p\n", ip, (v)); \ - break; \ - } \ - } while (0) -#else /* !CONFIG_IA64_DEBUG_CMPXCHG */ -# define CMPXCHG_BUGCHECK_DECL -# define CMPXCHG_BUGCHECK(v) -#endif /* !CONFIG_IA64_DEBUG_CMPXCHG */ - #endif #ifdef __KERNEL__ -- cgit v1.2.3-70-g09d2 From 1c07ae43bb7f01480c0aceec36d1f27dd6c598bf Mon Sep 17 00:00:00 2001 From: Daniel Walker Date: Wed, 11 Apr 2012 21:04:02 -0700 Subject: arm: msm: halibut: remove unneeded fixup This old fixup causes a build failure, so I remove it just like in trout. Signed-off-by: Daniel Walker Signed-off-by: David Brown --- arch/arm/mach-msm/board-halibut.c | 3 --- 1 file changed, 3 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-msm/board-halibut.c b/arch/arm/mach-msm/board-halibut.c index 3698a370d63..26aac363a06 100644 --- a/arch/arm/mach-msm/board-halibut.c +++ b/arch/arm/mach-msm/board-halibut.c @@ -86,9 +86,6 @@ static void __init halibut_init(void) static void __init halibut_fixup(struct tag *tags, char **cmdline, struct meminfo *mi) { - mi->nr_banks=1; - mi->bank[0].start = PHYS_OFFSET; - mi->bank[0].size = (101*1024*1024); } static void __init halibut_map_io(void) -- cgit v1.2.3-70-g09d2 From 204241c27c8fa2186e6d656d587f941422fff1b9 Mon Sep 17 00:00:00 2001 From: Daniel Walker Date: Thu, 12 Apr 2012 08:45:37 -0700 Subject: arm: msm: trout: fix compile failure Fixes the following warnings, arch/arm/mach-msm/board-trout.c: In function 'trout_init': arch/arm/mach-msm/board-trout.c:71: error: 'system_rev' undeclared (first use in this function) arch/arm/mach-msm/board-trout.c:71: error: (Each undeclared identifier is reported only once arch/arm/mach-msm/board-trout.c:71: error: for each function it appears in.) and arch/arm/mach-msm/board-trout-panel.c: In function 'trout_init_panel': arch/arm/mach-msm/board-trout-panel.c:267: error: 'system_rev' undeclared (first use in this function) arch/arm/mach-msm/board-trout-panel.c:267: error: (Each undeclared identifier is reported only once arch/arm/mach-msm/board-trout-panel.c:267: error: for each function it appears in.) This came in with the following commit 9f97da78bf018206fb623cd351d454af2f105fe0 which removes asm/system.h Signed-off-by: Daniel Walker cc: David Howells cc: Bryan Huntsman cc: linux-arm-msm@vger.kernel.org cc: linux-arm-kernel@lists.infradead.org Signed-off-by: David Brown --- arch/arm/mach-msm/board-trout-panel.c | 1 + arch/arm/mach-msm/board-trout.c | 1 + 2 files changed, 2 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-msm/board-trout-panel.c b/arch/arm/mach-msm/board-trout-panel.c index 25105c1027f..89bf6b42669 100644 --- a/arch/arm/mach-msm/board-trout-panel.c +++ b/arch/arm/mach-msm/board-trout-panel.c @@ -12,6 +12,7 @@ #include #include +#include #include #include diff --git a/arch/arm/mach-msm/board-trout.c b/arch/arm/mach-msm/board-trout.c index 5414f76ec0a..d4060a37e23 100644 --- a/arch/arm/mach-msm/board-trout.c +++ b/arch/arm/mach-msm/board-trout.c @@ -19,6 +19,7 @@ #include #include +#include #include #include #include -- cgit v1.2.3-70-g09d2 From af33eadc73e4a5d35a966c1c7ffe28a8424c9d96 Mon Sep 17 00:00:00 2001 From: David Brown Date: Thu, 12 Apr 2012 11:36:50 -0700 Subject: ARM: msm: Fix section mismatches in proc_comm.c The change commit 4416e9eb0b4859b3d28016c5fd0a609bdcbc8a2a Author: Gregory Bean Date: Wed Jul 28 10:22:12 2010 -0700 arm: msm: Fix section mismatch in smd.c. fixes a section mismatch between the board file and the smd driver's probe function, however, it misses the additional mismatches between the probe function and some routines it calls. Fix these up as well. Signed-off-by: David Brown --- arch/arm/mach-msm/proc_comm.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-msm/proc_comm.c b/arch/arm/mach-msm/proc_comm.c index 67e701c7f18..9980dc736e7 100644 --- a/arch/arm/mach-msm/proc_comm.c +++ b/arch/arm/mach-msm/proc_comm.c @@ -121,7 +121,7 @@ int msm_proc_comm(unsigned cmd, unsigned *data1, unsigned *data2) * and unknown state. This function should be called early to * wait on the ARM9. */ -void __init proc_comm_boot_wait(void) +void __devinit proc_comm_boot_wait(void) { void __iomem *base = MSM_SHARED_RAM_BASE; -- cgit v1.2.3-70-g09d2 From 9e0daff30fd7ecf698e5d20b0fa7f851e427cca5 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Fri, 13 Apr 2012 11:56:22 -0700 Subject: sparc64: Fix bootup crash on sun4v. The DS driver registers as a subsys_initcall() but this can be too early, in particular this risks registering before we've had a chance to allocate and setup module_kset in kernel/params.c which is performed also as a subsyts_initcall(). Register DS using device_initcall() insteal. Signed-off-by: David S. Miller Cc: stable@vger.kernel.org --- arch/sparc/kernel/ds.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/sparc/kernel/ds.c b/arch/sparc/kernel/ds.c index fea13c7b1ae..b93c2c9ccb1 100644 --- a/arch/sparc/kernel/ds.c +++ b/arch/sparc/kernel/ds.c @@ -1264,4 +1264,4 @@ static int __init ds_init(void) return vio_register_driver(&ds_driver); } -subsys_initcall(ds_init); +fs_initcall(ds_init); -- cgit v1.2.3-70-g09d2 From 3d3eeb2ef26112a200785e5fca58ec58dd33bf1e Mon Sep 17 00:00:00 2001 From: "Paul E. McKenney" Date: Fri, 13 Apr 2012 03:35:13 +0000 Subject: sparc64: Eliminate obsolete __handle_softirq() function The invocation of softirq is now handled by irq_exit(), so there is no need for sparc64 to invoke it on the trap-return path. In fact, doing so is a bug because if the trap occurred in the idle loop, this invocation can result in lockdep-RCU failures. The problem is that RCU ignores idle CPUs, and the sparc64 trap-return path to the softirq handlers fails to tell RCU that the CPU must be considered non-idle while those handlers are executing. This means that RCU is ignoring any RCU read-side critical sections in those handlers, which in turn means that RCU-protected data can be yanked out from under those read-side critical sections. The shiny new lockdep-RCU ability to detect RCU read-side critical sections that RCU is ignoring located this problem. The fix is straightforward: Make sparc64 stop manually invoking the softirq handlers. Reported-by: Meelis Roos Suggested-by: David Miller Signed-off-by: Paul E. McKenney Tested-by: Meelis Roos Cc: stable@vger.kernel.org Signed-off-by: David S. Miller --- arch/sparc/kernel/rtrap_64.S | 7 ------- 1 file changed, 7 deletions(-) (limited to 'arch') diff --git a/arch/sparc/kernel/rtrap_64.S b/arch/sparc/kernel/rtrap_64.S index 77f1b95e080..9171fc238de 100644 --- a/arch/sparc/kernel/rtrap_64.S +++ b/arch/sparc/kernel/rtrap_64.S @@ -20,11 +20,6 @@ .text .align 32 -__handle_softirq: - call do_softirq - nop - ba,a,pt %xcc, __handle_softirq_continue - nop __handle_preemption: call schedule wrpr %g0, RTRAP_PSTATE, %pstate @@ -89,9 +84,7 @@ rtrap: cmp %l1, 0 /* mm/ultra.S:xcall_report_regs KNOWS about this load. */ - bne,pn %icc, __handle_softirq ldx [%sp + PTREGS_OFF + PT_V9_TSTATE], %l1 -__handle_softirq_continue: rtrap_xcall: sethi %hi(0xf << 20), %l4 and %l1, %l4, %l4 -- cgit v1.2.3-70-g09d2 From 3cd21f6162e7703adc13c5030f316db9ec6bf5cf Mon Sep 17 00:00:00 2001 From: Maurus Cuelenaere Date: Sat, 14 Apr 2012 07:42:04 -0700 Subject: ARM: SAMSUNG: make SAMSUNG_PM_DEBUG select DEBUG_LL When selecting SAMSUNG_PM_DEBUG, it complains about a missing printascii() function if you do not select DEBUG_LL, so make the former select the latter. Signed-off-by: Maurus Cuelenaere Acked-by: Heiko Stuebner Signed-off-by: Kukjin Kim --- arch/arm/plat-samsung/Kconfig | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/arm/plat-samsung/Kconfig b/arch/arm/plat-samsung/Kconfig index 71553f41001..a0ffc77da80 100644 --- a/arch/arm/plat-samsung/Kconfig +++ b/arch/arm/plat-samsung/Kconfig @@ -302,6 +302,7 @@ comment "Power management" config SAMSUNG_PM_DEBUG bool "S3C2410 PM Suspend debug" depends on PM + select DEBUG_LL help Say Y here if you want verbose debugging from the PM Suspend and Resume code. See -- cgit v1.2.3-70-g09d2 From f441f8a0a180827e3f7bd705aed9cffba62cebc2 Mon Sep 17 00:00:00 2001 From: Marek Szyprowski Date: Mon, 9 Apr 2012 21:10:32 -0700 Subject: ARM: EXYNOS: fix regulator name for NURI board Regulator names should not contain slash to avoid issues with debugfs. Signed-off-by: Marek Szyprowski Signed-off-by: Kyungmin Park Signed-off-by: Kukjin Kim --- arch/arm/mach-exynos/mach-nuri.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-exynos/mach-nuri.c b/arch/arm/mach-exynos/mach-nuri.c index b3982c867c9..f92ec88b126 100644 --- a/arch/arm/mach-exynos/mach-nuri.c +++ b/arch/arm/mach-exynos/mach-nuri.c @@ -571,7 +571,7 @@ static struct regulator_init_data __initdata max8997_ldo7_data = { static struct regulator_init_data __initdata max8997_ldo8_data = { .constraints = { - .name = "VUSB/VDAC_3.3V_C210", + .name = "VUSB+VDAC_3.3V_C210", .min_uV = 3300000, .max_uV = 3300000, .valid_ops_mask = REGULATOR_CHANGE_STATUS, -- cgit v1.2.3-70-g09d2 From 3d3231b1c986aa3ee1d94ffe36082faf45f0d96b Mon Sep 17 00:00:00 2001 From: Marek Szyprowski Date: Mon, 9 Apr 2012 21:10:32 -0700 Subject: ARM: EXYNOS: set fix xusbxti clock for NURI and Universal210 boards On some versions of NURI and UniversalC210 boards, camera clocks are routed directly to xusbxti clock source. This patch sets the correct value for this clock to let usb and camera sensors to work correctly and avoid division by zero on driver's probe. Signed-off-by: Marek Szyprowski Signed-off-by: Kyungmin Park Signed-off-by: Kukjin Kim --- arch/arm/mach-exynos/mach-nuri.c | 2 +- arch/arm/mach-exynos/mach-universal_c210.c | 2 ++ 2 files changed, 3 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-exynos/mach-nuri.c b/arch/arm/mach-exynos/mach-nuri.c index f92ec88b126..dd3ec8eef84 100644 --- a/arch/arm/mach-exynos/mach-nuri.c +++ b/arch/arm/mach-exynos/mach-nuri.c @@ -1347,6 +1347,7 @@ static struct platform_device *nuri_devices[] __initdata = { static void __init nuri_map_io(void) { + clk_xusbxti.rate = 24000000; exynos_init_io(NULL, 0); s3c24xx_init_clocks(24000000); s3c24xx_init_uarts(nuri_uartcfgs, ARRAY_SIZE(nuri_uartcfgs)); @@ -1379,7 +1380,6 @@ static void __init nuri_machine_init(void) nuri_camera_init(); nuri_ehci_init(); - clk_xusbxti.rate = 24000000; /* Last */ platform_add_devices(nuri_devices, ARRAY_SIZE(nuri_devices)); diff --git a/arch/arm/mach-exynos/mach-universal_c210.c b/arch/arm/mach-exynos/mach-universal_c210.c index 6bb9dbdd73f..7ebf79c2ab3 100644 --- a/arch/arm/mach-exynos/mach-universal_c210.c +++ b/arch/arm/mach-exynos/mach-universal_c210.c @@ -29,6 +29,7 @@ #include #include +#include #include #include #include @@ -1057,6 +1058,7 @@ static struct platform_device *universal_devices[] __initdata = { static void __init universal_map_io(void) { + clk_xusbxti.rate = 24000000; exynos_init_io(NULL, 0); s3c24xx_init_clocks(24000000); s3c24xx_init_uarts(universal_uartcfgs, ARRAY_SIZE(universal_uartcfgs)); -- cgit v1.2.3-70-g09d2 From 5262c543317cf362fe7223563609efaeb555f716 Mon Sep 17 00:00:00 2001 From: Marek Szyprowski Date: Mon, 9 Apr 2012 21:10:32 -0700 Subject: ARM: EXYNOS: Remove broken config values for touchscren for NURI board The atmel_mxt_ts driver has been extended to support more 'configuration objects' in commit 81c88a711 ("Input: atmel_mxt_ts - update object list"), what broke the configuration values for NURI board. These values are optional anyway, so remove them to get the driver working correctly. Signed-off-by: Marek Szyprowski Signed-off-by: Kyungmin Park Signed-off-by: Kukjin Kim --- arch/arm/mach-exynos/mach-nuri.c | 42 ---------------------------------------- 1 file changed, 42 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-exynos/mach-nuri.c b/arch/arm/mach-exynos/mach-nuri.c index dd3ec8eef84..b4f1f902ce6 100644 --- a/arch/arm/mach-exynos/mach-nuri.c +++ b/arch/arm/mach-exynos/mach-nuri.c @@ -307,49 +307,7 @@ static struct i2c_board_info i2c1_devs[] __initdata = { }; /* TSP */ -static u8 mxt_init_vals[] = { - /* MXT_GEN_COMMAND(6) */ - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - /* MXT_GEN_POWER(7) */ - 0x20, 0xff, 0x32, - /* MXT_GEN_ACQUIRE(8) */ - 0x0a, 0x00, 0x05, 0x00, 0x00, 0x00, 0x09, 0x23, - /* MXT_TOUCH_MULTI(9) */ - 0x00, 0x00, 0x00, 0x13, 0x0b, 0x00, 0x00, 0x00, 0x02, 0x00, - 0x00, 0x01, 0x01, 0x0e, 0x0a, 0x0a, 0x0a, 0x0a, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, - /* MXT_TOUCH_KEYARRAY(15) */ - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x02, 0x00, - 0x00, - /* MXT_SPT_GPIOPWM(19) */ - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - /* MXT_PROCI_GRIPFACE(20) */ - 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x50, 0x28, 0x04, - 0x0f, 0x0a, - /* MXT_PROCG_NOISE(22) */ - 0x05, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x03, 0x23, 0x00, - 0x00, 0x05, 0x0f, 0x19, 0x23, 0x2d, 0x03, - /* MXT_TOUCH_PROXIMITY(23) */ - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, - /* MXT_PROCI_ONETOUCH(24) */ - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - /* MXT_SPT_SELFTEST(25) */ - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, - /* MXT_PROCI_TWOTOUCH(27) */ - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - /* MXT_SPT_CTECONFIG(28) */ - 0x00, 0x00, 0x02, 0x08, 0x10, 0x00, -}; - static struct mxt_platform_data mxt_platform_data = { - .config = mxt_init_vals, - .config_length = ARRAY_SIZE(mxt_init_vals), - .x_line = 18, .y_line = 11, .x_size = 1024, -- cgit v1.2.3-70-g09d2 From 5ad14306a3f468df61e1739f9f252663f18f1702 Mon Sep 17 00:00:00 2001 From: Sachin Kamat Date: Sat, 14 Apr 2012 07:53:51 -0700 Subject: ARM: EXYNOS: Fix Kconfig dependencies for device tree enabled machine files Add config dependency for Exynos4 and Exynos5 device tree enabled machine files on config options ARCH_EXYNOS4 and ARCH_EXYNOS5 respectively. Enabling machine support without proper ARCH support enabled is incorrect. Signed-off-by: Sachin Kamat Signed-off-by: Kukjin Kim --- arch/arm/mach-exynos/Kconfig | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig index 0491ceef1cd..e81c35f936b 100644 --- a/arch/arm/mach-exynos/Kconfig +++ b/arch/arm/mach-exynos/Kconfig @@ -368,6 +368,7 @@ comment "Flattened Device Tree based board for EXYNOS SoCs" config MACH_EXYNOS4_DT bool "Samsung Exynos4 Machine using device tree" + depends on ARCH_EXYNOS4 select CPU_EXYNOS4210 select USE_OF select ARM_AMBA @@ -380,6 +381,7 @@ config MACH_EXYNOS4_DT config MACH_EXYNOS5_DT bool "SAMSUNG EXYNOS5 Machine using device tree" + depends on ARCH_EXYNOS5 select SOC_EXYNOS5250 select USE_OF select ARM_AMBA -- cgit v1.2.3-70-g09d2 From eb03f28002c3dc96cbb8d3869df2d8aef3ef3b01 Mon Sep 17 00:00:00 2001 From: Rob Herring Date: Thu, 12 Apr 2012 10:17:28 -0500 Subject: ARM: dts: remove blank interrupt-parent properties These were incorrectly introduced and can cause problems for of_irq_init. The correct way to define a root controller is no interrupt-parent set at all or the interrupt-parent is set to the root controller itself when inherited from a parent node. Signed-off-by: Rob Herring Tested-by: Lee Jones Signed-off-by: Olof Johansson --- arch/arm/boot/dts/at91sam9g20.dtsi | 1 - arch/arm/boot/dts/at91sam9g45.dtsi | 1 - arch/arm/boot/dts/at91sam9x5.dtsi | 1 - arch/arm/boot/dts/db8500.dtsi | 1 - arch/arm/boot/dts/highbank.dts | 1 - 5 files changed, 5 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/at91sam9g20.dtsi b/arch/arm/boot/dts/at91sam9g20.dtsi index 799ad1889b5..773ef484037 100644 --- a/arch/arm/boot/dts/at91sam9g20.dtsi +++ b/arch/arm/boot/dts/at91sam9g20.dtsi @@ -55,7 +55,6 @@ #interrupt-cells = <2>; compatible = "atmel,at91rm9200-aic"; interrupt-controller; - interrupt-parent; reg = <0xfffff000 0x200>; }; diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi index 9e6eb6ecea0..c8042147eaa 100644 --- a/arch/arm/boot/dts/at91sam9g45.dtsi +++ b/arch/arm/boot/dts/at91sam9g45.dtsi @@ -56,7 +56,6 @@ #interrupt-cells = <2>; compatible = "atmel,at91rm9200-aic"; interrupt-controller; - interrupt-parent; reg = <0xfffff000 0x200>; }; diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi index 70ab3a4e026..dd4ed748469 100644 --- a/arch/arm/boot/dts/at91sam9x5.dtsi +++ b/arch/arm/boot/dts/at91sam9x5.dtsi @@ -54,7 +54,6 @@ #interrupt-cells = <2>; compatible = "atmel,at91rm9200-aic"; interrupt-controller; - interrupt-parent; reg = <0xfffff000 0x200>; }; diff --git a/arch/arm/boot/dts/db8500.dtsi b/arch/arm/boot/dts/db8500.dtsi index d73dce64566..14bc3070509 100644 --- a/arch/arm/boot/dts/db8500.dtsi +++ b/arch/arm/boot/dts/db8500.dtsi @@ -24,7 +24,6 @@ #interrupt-cells = <3>; #address-cells = <1>; interrupt-controller; - interrupt-parent; reg = <0xa0411000 0x1000>, <0xa0410100 0x100>; }; diff --git a/arch/arm/boot/dts/highbank.dts b/arch/arm/boot/dts/highbank.dts index 37c0ff9c8b9..83e72294aef 100644 --- a/arch/arm/boot/dts/highbank.dts +++ b/arch/arm/boot/dts/highbank.dts @@ -89,7 +89,6 @@ #size-cells = <0>; #address-cells = <1>; interrupt-controller; - interrupt-parent; reg = <0xfff11000 0x1000>, <0xfff10100 0x100>; }; -- cgit v1.2.3-70-g09d2 From 47d9e44d1dbabc53500e86d5597f2737a40f1f42 Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Fri, 13 Apr 2012 13:52:15 -0700 Subject: ARM: OMAP: clock: cleanup CPUfreq leftovers, fix build errors Now that we have OPP layer, and OMAP CPUfreq driver is using it, we no longer need/use the clock framework code for filling up CPUfreq tables. Remove it. Removing this code also eliminates build errors when CPU_FREQ_TABLE support is not enabled. Thanks to Russell King for pointing out the parts I missed under plat-omap in the original version and also pointing out the build errors when CPUFREQ_TABLE support was not enabled. Cc: Russell King Signed-off-by: Kevin Hilman Acked-by: Paul Walmsley Acked-by: Tony Lindgren Signed-off-by: Olof Johansson --- arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c | 80 ---------------------------- arch/arm/mach-omap2/clock.c | 5 -- arch/arm/mach-omap2/clock.h | 8 --- arch/arm/plat-omap/clock.c | 26 --------- arch/arm/plat-omap/include/plat/clock.h | 10 ---- 5 files changed, 129 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c b/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c index 7072e0d651b..3d9d746b221 100644 --- a/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c +++ b/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c @@ -165,83 +165,3 @@ int omap2_select_table_rate(struct clk *clk, unsigned long rate) return 0; } - -#ifdef CONFIG_CPU_FREQ -/* - * Walk PRCM rate table and fillout cpufreq freq_table - * XXX This should be replaced by an OPP layer in the near future - */ -static struct cpufreq_frequency_table *freq_table; - -void omap2_clk_init_cpufreq_table(struct cpufreq_frequency_table **table) -{ - const struct prcm_config *prcm; - int i = 0; - int tbl_sz = 0; - - if (!cpu_is_omap24xx()) - return; - - for (prcm = rate_table; prcm->mpu_speed; prcm++) { - if (!(prcm->flags & cpu_mask)) - continue; - if (prcm->xtal_speed != sclk->rate) - continue; - - /* don't put bypass rates in table */ - if (prcm->dpll_speed == prcm->xtal_speed) - continue; - - tbl_sz++; - } - - /* - * XXX Ensure that we're doing what CPUFreq expects for this error - * case and the following one - */ - if (tbl_sz == 0) { - pr_warning("%s: no matching entries in rate_table\n", - __func__); - return; - } - - /* Include the CPUFREQ_TABLE_END terminator entry */ - tbl_sz++; - - freq_table = kzalloc(sizeof(struct cpufreq_frequency_table) * tbl_sz, - GFP_ATOMIC); - if (!freq_table) { - pr_err("%s: could not kzalloc frequency table\n", __func__); - return; - } - - for (prcm = rate_table; prcm->mpu_speed; prcm++) { - if (!(prcm->flags & cpu_mask)) - continue; - if (prcm->xtal_speed != sclk->rate) - continue; - - /* don't put bypass rates in table */ - if (prcm->dpll_speed == prcm->xtal_speed) - continue; - - freq_table[i].index = i; - freq_table[i].frequency = prcm->mpu_speed / 1000; - i++; - } - - freq_table[i].index = i; - freq_table[i].frequency = CPUFREQ_TABLE_END; - - *table = &freq_table[0]; -} - -void omap2_clk_exit_cpufreq_table(struct cpufreq_frequency_table **table) -{ - if (!cpu_is_omap24xx()) - return; - - kfree(freq_table); -} - -#endif diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c index f57ed5baecc..d9f4931513f 100644 --- a/arch/arm/mach-omap2/clock.c +++ b/arch/arm/mach-omap2/clock.c @@ -536,10 +536,5 @@ struct clk_functions omap2_clk_functions = { .clk_set_rate = omap2_clk_set_rate, .clk_set_parent = omap2_clk_set_parent, .clk_disable_unused = omap2_clk_disable_unused, -#ifdef CONFIG_CPU_FREQ - /* These will be removed when the OPP code is integrated */ - .clk_init_cpufreq_table = omap2_clk_init_cpufreq_table, - .clk_exit_cpufreq_table = omap2_clk_exit_cpufreq_table, -#endif }; diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h index b8c2a686481..a1bb23a2335 100644 --- a/arch/arm/mach-omap2/clock.h +++ b/arch/arm/mach-omap2/clock.h @@ -146,14 +146,6 @@ extern const struct clksel_rate gpt_sys_rates[]; extern const struct clksel_rate gfx_l3_rates[]; extern const struct clksel_rate dsp_ick_rates[]; -#if defined(CONFIG_ARCH_OMAP2) && defined(CONFIG_CPU_FREQ) -extern void omap2_clk_init_cpufreq_table(struct cpufreq_frequency_table **table); -extern void omap2_clk_exit_cpufreq_table(struct cpufreq_frequency_table **table); -#else -#define omap2_clk_init_cpufreq_table 0 -#define omap2_clk_exit_cpufreq_table 0 -#endif - extern const struct clkops clkops_omap2_iclk_dflt_wait; extern const struct clkops clkops_omap2_iclk_dflt; extern const struct clkops clkops_omap2_iclk_idle_only; diff --git a/arch/arm/plat-omap/clock.c b/arch/arm/plat-omap/clock.c index 8506cbb7fea..62ec5c45279 100644 --- a/arch/arm/plat-omap/clock.c +++ b/arch/arm/plat-omap/clock.c @@ -398,32 +398,6 @@ struct clk dummy_ck = { .ops = &clkops_null, }; -#ifdef CONFIG_CPU_FREQ -void clk_init_cpufreq_table(struct cpufreq_frequency_table **table) -{ - unsigned long flags; - - if (!arch_clock || !arch_clock->clk_init_cpufreq_table) - return; - - spin_lock_irqsave(&clockfw_lock, flags); - arch_clock->clk_init_cpufreq_table(table); - spin_unlock_irqrestore(&clockfw_lock, flags); -} - -void clk_exit_cpufreq_table(struct cpufreq_frequency_table **table) -{ - unsigned long flags; - - if (!arch_clock || !arch_clock->clk_exit_cpufreq_table) - return; - - spin_lock_irqsave(&clockfw_lock, flags); - arch_clock->clk_exit_cpufreq_table(table); - spin_unlock_irqrestore(&clockfw_lock, flags); -} -#endif - /* * */ diff --git a/arch/arm/plat-omap/include/plat/clock.h b/arch/arm/plat-omap/include/plat/clock.h index 240a7b9fd94..d0ef57c1d71 100644 --- a/arch/arm/plat-omap/include/plat/clock.h +++ b/arch/arm/plat-omap/include/plat/clock.h @@ -272,8 +272,6 @@ struct clk { #endif }; -struct cpufreq_frequency_table; - struct clk_functions { int (*clk_enable)(struct clk *clk); void (*clk_disable)(struct clk *clk); @@ -283,10 +281,6 @@ struct clk_functions { void (*clk_allow_idle)(struct clk *clk); void (*clk_deny_idle)(struct clk *clk); void (*clk_disable_unused)(struct clk *clk); -#ifdef CONFIG_CPU_FREQ - void (*clk_init_cpufreq_table)(struct cpufreq_frequency_table **); - void (*clk_exit_cpufreq_table)(struct cpufreq_frequency_table **); -#endif }; extern int mpurate; @@ -301,10 +295,6 @@ extern void recalculate_root_clocks(void); extern unsigned long followparent_recalc(struct clk *clk); extern void clk_enable_init_clocks(void); unsigned long omap_fixed_divisor_recalc(struct clk *clk); -#ifdef CONFIG_CPU_FREQ -extern void clk_init_cpufreq_table(struct cpufreq_frequency_table **table); -extern void clk_exit_cpufreq_table(struct cpufreq_frequency_table **table); -#endif extern struct clk *omap_clk_get_by_name(const char *name); extern int omap_clk_enable_autoidle_all(void); extern int omap_clk_disable_autoidle_all(void); -- cgit v1.2.3-70-g09d2 From 9f85550347f51c79a917b2aec04c90691c11e20a Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Tue, 10 Apr 2012 12:37:42 +0100 Subject: ARM: 7359/2: smp_twd: Only wait for reprogramming on active cpus During booting of cpu1, there is a short window where cpu1 is online, but not active where cpu1 is occupied by waiting to become active. If cpu0 then decides to schedule something on cpu1 and wait for it to complete, before cpu0 has set cpu1 active, we have a deadlock. Typically it's this CPU frequency transition that happens at this time, so let's just not wait for it to happen, it will happen whenever the CPU eventually comes online instead. Cc: Peter Zijlstra Cc: stable@kernel.org Signed-off-by: Jonas Aaberg Reviewed-by: Rickard Andersson Signed-off-by: Linus Walleij Signed-off-by: Russell King --- arch/arm/kernel/smp_twd.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/kernel/smp_twd.c b/arch/arm/kernel/smp_twd.c index fef42b21cec..5b150afb995 100644 --- a/arch/arm/kernel/smp_twd.c +++ b/arch/arm/kernel/smp_twd.c @@ -118,10 +118,14 @@ static int twd_cpufreq_transition(struct notifier_block *nb, * The twd clock events must be reprogrammed to account for the new * frequency. The timer is local to a cpu, so cross-call to the * changing cpu. + * + * Only wait for it to finish, if the cpu is active to avoid + * deadlock when cpu1 is spinning on while(!cpu_active(cpu1)) during + * booting of that cpu. */ if (state == CPUFREQ_POSTCHANGE || state == CPUFREQ_RESUMECHANGE) smp_call_function_single(freqs->cpu, twd_update_frequency, - NULL, 1); + NULL, cpu_active(freqs->cpu)); return NOTIFY_OK; } -- cgit v1.2.3-70-g09d2 From e5ab85800820edd907d3f43f285e1232f84d5a41 Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Thu, 12 Apr 2012 17:15:08 +0100 Subject: ARM: 7382/1: mm: truncate memory banks to fit in 4GB space for classic MMU If a bank of memory spanning the 4GB boundary is added on a !CONFIG_LPAE kernel then we will hang early during boot since the memory bank will have wrapped around to zero. This patch truncates memory banks for !LPAE configurations when the end address is not representable in 32 bits. Acked-by: Nicolas Pitre Signed-off-by: Will Deacon Signed-off-by: Russell King --- arch/arm/kernel/setup.c | 16 +++++++++++++++- 1 file changed, 15 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c index b91411371ae..ebfac782593 100644 --- a/arch/arm/kernel/setup.c +++ b/arch/arm/kernel/setup.c @@ -523,7 +523,21 @@ int __init arm_add_memory(phys_addr_t start, unsigned long size) */ size -= start & ~PAGE_MASK; bank->start = PAGE_ALIGN(start); - bank->size = size & PAGE_MASK; + +#ifndef CONFIG_LPAE + if (bank->start + size < bank->start) { + printk(KERN_CRIT "Truncating memory at 0x%08llx to fit in " + "32-bit physical address space\n", (long long)start); + /* + * To ensure bank->start + bank->size is representable in + * 32 bits, we use ULONG_MAX as the upper limit rather than 4GB. + * This means we lose a page after masking. + */ + size = ULONG_MAX - bank->start; + } +#endif + + bank->size = size & PAGE_MASK; /* * Check whether this memory region has non-zero size or -- cgit v1.2.3-70-g09d2 From 078c04545ba56da21567728a909a496df5ff730d Mon Sep 17 00:00:00 2001 From: Jonathan Austin Date: Thu, 12 Apr 2012 17:45:25 +0100 Subject: ARM: 7384/1: ThumbEE: Disable userspace TEEHBR access for !CONFIG_ARM_THUMBEE Currently when ThumbEE is not enabled (!CONFIG_ARM_THUMBEE) the ThumbEE register states are not saved/restored at context switch. The default state of the ThumbEE Ctrl register (TEECR) allows userspace accesses to the ThumbEE Base Handler register (TEEHBR). This can cause unexpected behaviour when people use ThumbEE on !CONFIG_ARM_THUMBEE kernels, as well as allowing covert communication - eg between userspace tasks running inside chroot jails. This patch sets up TEECR in order to prevent user-space access to TEEHBR when !CONFIG_ARM_THUMBEE. In this case, tasks are sent SIGILL if they try to access TEEHBR. Cc: stable@vger.kernel.org Reviewed-by: Will Deacon Signed-off-by: Jonathan Austin Signed-off-by: Russell King --- arch/arm/mm/proc-v7.S | 12 ++++++++++++ 1 file changed, 12 insertions(+) (limited to 'arch') diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S index f1c8486f750..c2e2b66f72b 100644 --- a/arch/arm/mm/proc-v7.S +++ b/arch/arm/mm/proc-v7.S @@ -254,6 +254,18 @@ __v7_setup: ldr r6, =NMRR @ NMRR mcr p15, 0, r5, c10, c2, 0 @ write PRRR mcr p15, 0, r6, c10, c2, 1 @ write NMRR +#endif +#ifndef CONFIG_ARM_THUMBEE + mrc p15, 0, r0, c0, c1, 0 @ read ID_PFR0 for ThumbEE + and r0, r0, #(0xf << 12) @ ThumbEE enabled field + teq r0, #(1 << 12) @ check if ThumbEE is present + bne 1f + mov r5, #0 + mcr p14, 6, r5, c1, c0, 0 @ Initialize TEEHBR to 0 + mrc p14, 6, r0, c0, c0, 0 @ load TEECR + orr r0, r0, #1 @ set the 1st bit in order to + mcr p14, 6, r0, c0, c0, 0 @ stop userspace TEEHBR access +1: #endif adr r5, v7_crval ldmia r5, {r5, r6} -- cgit v1.2.3-70-g09d2 From 708e5978dfee0090a27c5531ce3b017dd6d190a2 Mon Sep 17 00:00:00 2001 From: Rabin Vincent Date: Sat, 14 Apr 2012 21:51:32 +0100 Subject: ARM: 7386/1: jump_label: fixup for rename to static_key c5905afb0 ("static keys: Introduce 'struct static_key'...") renamed struct jump_label_key to struct static_key. Fixup ARM for this to eliminate these build warnings: include/linux/jump_label.h:113:2: warning: passing argument 1 of 'arch_static_branch' from incompatible pointer type include/asm/jump_label.h:17:82: note: expected 'struct jump_label_key *' but argument is of type 'struct static_key *' Signed-off-by: Rabin Vincent Signed-off-by: Russell King --- arch/arm/include/asm/jump_label.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/include/asm/jump_label.h b/arch/arm/include/asm/jump_label.h index 5c5ca2ea62b..bfc198c7591 100644 --- a/arch/arm/include/asm/jump_label.h +++ b/arch/arm/include/asm/jump_label.h @@ -14,7 +14,7 @@ #define JUMP_LABEL_NOP "nop" #endif -static __always_inline bool arch_static_branch(struct jump_label_key *key) +static __always_inline bool arch_static_branch(struct static_key *key) { asm goto("1:\n\t" JUMP_LABEL_NOP "\n\t" -- cgit v1.2.3-70-g09d2 From 12e993b89464707398e4209bd99983e376454985 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sun, 15 Apr 2012 17:23:00 -0700 Subject: x86-32: fix up strncpy_from_user() sign error The 'max' range needs to be unsigned, since the size of the user address space is bigger than 2GB. We know that 'count' is positive in 'long' (that is checked in the caller), so we will truncate 'max' down to something that fits in a signed long, but before we actually do that, that comparison needs to be done in unsigned. Bug introduced in commit 92ae03f2ef99 ("x86: merge 32/64-bit versions of 'strncpy_from_user()' and speed it up"). On x86-64 you can't trigger this, since the user address space is much smaller than 63 bits, and on x86-32 it works in practice, since you would seldom hit the strncpy limits anyway. I had actually tested the corner-cases, I had only tested them on x86-64. Besides, I had only worried about the case of a pointer *close* to the end of the address space, rather than really far away from it ;) This also changes the "we hit the user-specified maximum" to return 'res', for the trivial reason that gcc seems to generate better code that way. 'res' and 'count' are the same in that case, so it really doesn't matter which one we return. Signed-off-by: Linus Torvalds --- arch/x86/lib/usercopy.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/x86/lib/usercopy.c b/arch/x86/lib/usercopy.c index 57252c928f5..d6ae30bbd7b 100644 --- a/arch/x86/lib/usercopy.c +++ b/arch/x86/lib/usercopy.c @@ -57,7 +57,7 @@ static inline unsigned long count_bytes(unsigned long mask) * hit it), 'max' is the address space maximum (and we return * -EFAULT if we hit it). */ -static inline long do_strncpy_from_user(char *dst, const char __user *src, long count, long max) +static inline long do_strncpy_from_user(char *dst, const char __user *src, long count, unsigned long max) { long res = 0; @@ -100,7 +100,7 @@ static inline long do_strncpy_from_user(char *dst, const char __user *src, long * too? If so, that's ok - we got as much as the user asked for. */ if (res >= count) - return count; + return res; /* * Nope: we hit the address space limit, and we still had more -- cgit v1.2.3-70-g09d2 From 6c7b8e82aab75a25581c4d446fc87f96634e9ef9 Mon Sep 17 00:00:00 2001 From: Masami Hiramatsu Date: Fri, 13 Apr 2012 12:24:27 +0900 Subject: x86: Handle failures of parsing immediate operands in the instruction decoder This can happen if the instruction is much longer than the maximum length, or if insn->opnd_bytes is manually changed. This patch also fixes warnings from -Wswitch-default flag. Reported-by: Prashanth Nageshappa Signed-off-by: Masami Hiramatsu Cc: Linus Torvalds Cc: Ananth N Mavinakayanahalli Cc: Jim Keniston Cc: Linux-mm Cc: Oleg Nesterov Cc: Andi Kleen Cc: Christoph Hellwig Cc: Steven Rostedt Cc: Arnaldo Carvalho de Melo Cc: Anton Arapov Cc: Srikar Dronamraju Cc: yrl.pp-manager.tt@hitachi.com Cc: Peter Zijlstra Link: http://lkml.kernel.org/r/20120413032427.32577.42602.stgit@localhost.localdomain Signed-off-by: Ingo Molnar --- arch/x86/lib/insn.c | 53 ++++++++++++++++++++++++++++++++++++----------------- 1 file changed, 36 insertions(+), 17 deletions(-) (limited to 'arch') diff --git a/arch/x86/lib/insn.c b/arch/x86/lib/insn.c index 25feb1ae71c..b1e6c4b2e8e 100644 --- a/arch/x86/lib/insn.c +++ b/arch/x86/lib/insn.c @@ -379,8 +379,8 @@ err_out: return; } -/* Decode moffset16/32/64 */ -static void __get_moffset(struct insn *insn) +/* Decode moffset16/32/64. Return 0 if failed */ +static int __get_moffset(struct insn *insn) { switch (insn->addr_bytes) { case 2: @@ -397,15 +397,19 @@ static void __get_moffset(struct insn *insn) insn->moffset2.value = get_next(int, insn); insn->moffset2.nbytes = 4; break; + default: /* opnd_bytes must be modified manually */ + goto err_out; } insn->moffset1.got = insn->moffset2.got = 1; + return 1; + err_out: - return; + return 0; } -/* Decode imm v32(Iz) */ -static void __get_immv32(struct insn *insn) +/* Decode imm v32(Iz). Return 0 if failed */ +static int __get_immv32(struct insn *insn) { switch (insn->opnd_bytes) { case 2: @@ -417,14 +421,18 @@ static void __get_immv32(struct insn *insn) insn->immediate.value = get_next(int, insn); insn->immediate.nbytes = 4; break; + default: /* opnd_bytes must be modified manually */ + goto err_out; } + return 1; + err_out: - return; + return 0; } -/* Decode imm v64(Iv/Ov) */ -static void __get_immv(struct insn *insn) +/* Decode imm v64(Iv/Ov), Return 0 if failed */ +static int __get_immv(struct insn *insn) { switch (insn->opnd_bytes) { case 2: @@ -441,15 +449,18 @@ static void __get_immv(struct insn *insn) insn->immediate2.value = get_next(int, insn); insn->immediate2.nbytes = 4; break; + default: /* opnd_bytes must be modified manually */ + goto err_out; } insn->immediate1.got = insn->immediate2.got = 1; + return 1; err_out: - return; + return 0; } /* Decode ptr16:16/32(Ap) */ -static void __get_immptr(struct insn *insn) +static int __get_immptr(struct insn *insn) { switch (insn->opnd_bytes) { case 2: @@ -462,14 +473,17 @@ static void __get_immptr(struct insn *insn) break; case 8: /* ptr16:64 is not exist (no segment) */ - return; + return 0; + default: /* opnd_bytes must be modified manually */ + goto err_out; } insn->immediate2.value = get_next(unsigned short, insn); insn->immediate2.nbytes = 2; insn->immediate1.got = insn->immediate2.got = 1; + return 1; err_out: - return; + return 0; } /** @@ -489,7 +503,8 @@ void insn_get_immediate(struct insn *insn) insn_get_displacement(insn); if (inat_has_moffset(insn->attr)) { - __get_moffset(insn); + if (!__get_moffset(insn)) + goto err_out; goto done; } @@ -517,16 +532,20 @@ void insn_get_immediate(struct insn *insn) insn->immediate2.nbytes = 4; break; case INAT_IMM_PTR: - __get_immptr(insn); + if (!__get_immptr(insn)) + goto err_out; break; case INAT_IMM_VWORD32: - __get_immv32(insn); + if (!__get_immv32(insn)) + goto err_out; break; case INAT_IMM_VWORD: - __get_immv(insn); + if (!__get_immv(insn)) + goto err_out; break; default: - break; + /* Here, insn must have an immediate, but failed */ + goto err_out; } if (inat_has_second_immediate(insn->attr)) { insn->immediate2.value = get_next(char, insn); -- cgit v1.2.3-70-g09d2 From c76f39bddb84f93f70a5520d9253ec0317bec216 Mon Sep 17 00:00:00 2001 From: "Luck, Tony" Date: Mon, 16 Apr 2012 16:28:01 -0700 Subject: ia64: fix futex_atomic_cmpxchg_inatomic() Michel Lespinasse cleaned up the futex calling conventions in commit 37a9d912b24f ("futex: Sanitize cmpxchg_futex_value_locked API"). But the ia64 implementation was subtly broken. Gcc does not know that register "r8" will be updated by the fault handler if the cmpxchg instruction takes an exception. So it feels safe in letting the initialization of r8 slide to after the cmpxchg. Result: we always return 0 whether the user address faulted or not. Fix by moving the initialization of r8 into the __asm__ code so gcc won't move it. Reported-by: Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=42757 Tested-by: Acked-by: Michel Lespinasse Cc: stable@vger.kernel.org # v2.6.39+ Signed-off-by: Tony Luck Signed-off-by: Linus Torvalds --- arch/ia64/include/asm/futex.h | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/ia64/include/asm/futex.h b/arch/ia64/include/asm/futex.h index 0ab82cc2dc8..d2bf1fd5e44 100644 --- a/arch/ia64/include/asm/futex.h +++ b/arch/ia64/include/asm/futex.h @@ -106,15 +106,16 @@ futex_atomic_cmpxchg_inatomic(u32 *uval, u32 __user *uaddr, return -EFAULT; { - register unsigned long r8 __asm ("r8") = 0; + register unsigned long r8 __asm ("r8"); unsigned long prev; __asm__ __volatile__( " mf;; \n" - " mov ar.ccv=%3;; \n" - "[1:] cmpxchg4.acq %0=[%1],%2,ar.ccv \n" + " mov %0=r0 \n" + " mov ar.ccv=%4;; \n" + "[1:] cmpxchg4.acq %1=[%2],%3,ar.ccv \n" " .xdata4 \"__ex_table\", 1b-., 2f-. \n" "[2:]" - : "=r" (prev) + : "=r" (r8), "=r" (prev) : "r" (uaddr), "r" (newval), "rO" ((long) (unsigned) oldval) : "memory"); -- cgit v1.2.3-70-g09d2 From 2225fd56049643c1a7d645c0ce9d499d43c7974e Mon Sep 17 00:00:00 2001 From: Avi Kivity Date: Wed, 18 Apr 2012 15:03:04 +0300 Subject: KVM: VMX: Fix kvm_set_shared_msr() called in preemptible context kvm_set_shared_msr() may not be called in preemptible context, but vmx_set_msr() does so: BUG: using smp_processor_id() in preemptible [00000000] code: qemu-kvm/22713 caller is kvm_set_shared_msr+0x32/0xa0 [kvm] Pid: 22713, comm: qemu-kvm Not tainted 3.4.0-rc3+ #39 Call Trace: [] debug_smp_processor_id+0xe2/0x100 [] kvm_set_shared_msr+0x32/0xa0 [kvm] [] vmx_set_msr+0x28b/0x2d0 [kvm_intel] ... Making kvm_set_shared_msr() work in preemptible is cleaner, but it's used in the fast path. Making two variants is overkill, so this patch just disables preemption around the call. Reported-by: Dave Jones Signed-off-by: Avi Kivity Signed-off-by: Marcelo Tosatti --- arch/x86/kvm/vmx.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c index ad85adfef84..4ff0ab9bc3c 100644 --- a/arch/x86/kvm/vmx.c +++ b/arch/x86/kvm/vmx.c @@ -2210,9 +2210,12 @@ static int vmx_set_msr(struct kvm_vcpu *vcpu, u32 msr_index, u64 data) msr = find_msr_entry(vmx, msr_index); if (msr) { msr->data = data; - if (msr - vmx->guest_msrs < vmx->save_nmsrs) + if (msr - vmx->guest_msrs < vmx->save_nmsrs) { + preempt_disable(); kvm_set_shared_msr(msr->index, msr->data, msr->mask); + preempt_enable(); + } break; } ret = kvm_set_msr_common(vcpu, msr_index, data); -- cgit v1.2.3-70-g09d2