From f4f1269cb36adfb452c04dcb3d40f51b8a1956bb Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Sat, 3 Sep 2005 15:55:21 -0700 Subject: [PATCH] ppc32: Remove board support for ASH Support for the ASH board is no longer maintained and thus being removed Signed-off-by: Kumar Gala Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/ppc/boot/simple/embed_config.c | 2 +- arch/ppc/configs/ash_defconfig | 666 ------------------------------------ arch/ppc/platforms/4xx/Kconfig | 5 - arch/ppc/platforms/4xx/Makefile | 1 - arch/ppc/platforms/4xx/ash.c | 250 -------------- arch/ppc/platforms/4xx/ash.h | 83 ----- arch/ppc/syslib/ppc4xx_setup.c | 2 +- 7 files changed, 2 insertions(+), 1007 deletions(-) delete mode 100644 arch/ppc/configs/ash_defconfig delete mode 100644 arch/ppc/platforms/4xx/ash.c delete mode 100644 arch/ppc/platforms/4xx/ash.h (limited to 'arch') diff --git a/arch/ppc/boot/simple/embed_config.c b/arch/ppc/boot/simple/embed_config.c index c342b47e763..8dd5fb0fb77 100644 --- a/arch/ppc/boot/simple/embed_config.c +++ b/arch/ppc/boot/simple/embed_config.c @@ -784,7 +784,7 @@ embed_config(bd_t ** bdp) #ifdef CONFIG_IBM_OPENBIOS /* This could possibly work for all treeboot roms. */ -#if defined(CONFIG_ASH) || defined(CONFIG_BEECH) || defined(CONFIG_BUBINGA) +#if defined(CONFIG_BEECH) || defined(CONFIG_BUBINGA) #define BOARD_INFO_VECTOR 0xFFF80B50 /* openbios 1.19 moved this vector down - armin */ #else #define BOARD_INFO_VECTOR 0xFFFE0B50 diff --git a/arch/ppc/configs/ash_defconfig b/arch/ppc/configs/ash_defconfig deleted file mode 100644 index c4a73cc16cf..00000000000 --- a/arch/ppc/configs/ash_defconfig +++ /dev/null @@ -1,666 +0,0 @@ -# -# Automatically generated make config: don't edit -# -CONFIG_MMU=y -CONFIG_RWSEM_XCHGADD_ALGORITHM=y -CONFIG_HAVE_DEC_LOCK=y -CONFIG_PPC=y -CONFIG_PPC32=y -CONFIG_GENERIC_NVRAM=y - -# -# Code maturity level options -# -CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y -CONFIG_STANDALONE=y -CONFIG_BROKEN_ON_SMP=y - -# -# General setup -# -CONFIG_SWAP=y -CONFIG_SYSVIPC=y -# CONFIG_BSD_PROCESS_ACCT is not set -CONFIG_SYSCTL=y -CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_HOTPLUG is not set -# CONFIG_IKCONFIG is not set -CONFIG_EMBEDDED=y -# CONFIG_KALLSYMS is not set -CONFIG_FUTEX=y -# CONFIG_EPOLL is not set -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set - -# -# Loadable module support -# -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_MODULE_FORCE_UNLOAD is not set -CONFIG_OBSOLETE_MODPARM=y -# CONFIG_MODVERSIONS is not set -CONFIG_KMOD=y - -# -# Processor -# -# CONFIG_6xx is not set -CONFIG_40x=y -# CONFIG_44x is not set -# CONFIG_POWER3 is not set -# CONFIG_POWER4 is not set -# CONFIG_8xx is not set -# CONFIG_MATH_EMULATION is not set -# CONFIG_CPU_FREQ is not set -CONFIG_4xx=y - -# -# IBM 4xx options -# -CONFIG_ASH=y -# CONFIG_CPCI405 is not set -# CONFIG_EP405 is not set -# CONFIG_EVB405EP is not set -# CONFIG_OAK is not set -# CONFIG_REDWOOD_5 is not set -# CONFIG_REDWOOD_6 is not set -# CONFIG_SYCAMORE is not set -# CONFIG_WALNUT is not set -CONFIG_NP405H=y -CONFIG_IBM405_ERR77=y -CONFIG_IBM405_ERR51=y -CONFIG_IBM_OCP=y -CONFIG_PPC_OCP=y -CONFIG_IBM_OPENBIOS=y -# CONFIG_PM is not set -CONFIG_UART0_TTYS0=y -# CONFIG_UART0_TTYS1 is not set -CONFIG_NOT_COHERENT_CACHE=y - -# -# Platform options -# -# CONFIG_PC_KEYBOARD is not set -# CONFIG_SMP is not set -# CONFIG_PREEMPT is not set -# CONFIG_HIGHMEM is not set -CONFIG_KERNEL_ELF=y -CONFIG_BINFMT_ELF=y -# CONFIG_BINFMT_MISC is not set -CONFIG_CMDLINE_BOOL=y -CONFIG_CMDLINE="ip=on" - -# -# Bus options -# -CONFIG_PCI=y -CONFIG_PCI_DOMAINS=y -CONFIG_PCI_LEGACY_PROC=y -# CONFIG_PCI_NAMES is not set - -# -# Advanced setup -# -# CONFIG_ADVANCED_OPTIONS is not set - -# -# Default settings for advanced configuration options are used -# -CONFIG_HIGHMEM_START=0xfe000000 -CONFIG_LOWMEM_SIZE=0x30000000 -CONFIG_KERNEL_START=0xc0000000 -CONFIG_TASK_SIZE=0x80000000 -CONFIG_BOOT_LOAD=0x00400000 - -# -# Device Drivers -# - -# -# Generic Driver Options -# - -# -# Memory Technology Devices (MTD) -# -# CONFIG_MTD is not set - -# -# Parallel port support -# -# CONFIG_PARPORT is not set - -# -# Plug and Play support -# - -# -# Block devices -# -# CONFIG_BLK_DEV_FD is not set -# CONFIG_BLK_CPQ_DA is not set -# CONFIG_BLK_CPQ_CISS_DA is not set -# CONFIG_BLK_DEV_DAC960 is not set -# CONFIG_BLK_DEV_UMEM is not set -CONFIG_BLK_DEV_LOOP=y -# CONFIG_BLK_DEV_CRYPTOLOOP is not set -# CONFIG_BLK_DEV_NBD is not set -# CONFIG_BLK_DEV_CARMEL is not set -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=4096 -CONFIG_BLK_DEV_INITRD=y -# CONFIG_LBD is not set - -# -# ATA/ATAPI/MFM/RLL support -# -# CONFIG_IDE is not set - -# -# SCSI device support -# -# CONFIG_SCSI is not set - -# -# Multi-device support (RAID and LVM) -# -# CONFIG_MD is not set - -# -# Fusion MPT device support -# -# CONFIG_FUSION is not set - -# -# IEEE 1394 (FireWire) support -# -# CONFIG_IEEE1394 is not set - -# -# I2O device support -# -# CONFIG_I2O is not set - -# -# Macintosh device drivers -# - -# -# Networking support -# -CONFIG_NET=y - -# -# Networking options -# -# CONFIG_PACKET is not set -# CONFIG_NETLINK_DEV is not set -CONFIG_UNIX=y -# CONFIG_NET_KEY is not set -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_PNP=y -# CONFIG_IP_PNP_DHCP is not set -CONFIG_IP_PNP_BOOTP=y -# CONFIG_IP_PNP_RARP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_IP_MROUTE is not set -# CONFIG_ARPD is not set -CONFIG_SYN_COOKIES=y -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_IPV6 is not set -# CONFIG_DECNET is not set -# CONFIG_BRIDGE is not set -# CONFIG_NETFILTER is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_SCTP is not set -# CONFIG_ATM is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set -# CONFIG_NET_HW_FLOWCONTROL is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -CONFIG_NETDEVICES=y - -# -# ARCnet devices -# -# CONFIG_ARCNET is not set -# CONFIG_DUMMY is not set -# CONFIG_BONDING is not set -# CONFIG_EQUALIZER is not set -# CONFIG_TUN is not set - -# -# Ethernet (10 or 100Mbit) -# -# CONFIG_NET_ETHERNET is not set - -# -# Ethernet (1000 Mbit) -# -# CONFIG_ACENIC is not set -# CONFIG_DL2K is not set -# CONFIG_E1000 is not set -# CONFIG_NS83820 is not set -# CONFIG_HAMACHI is not set -# CONFIG_YELLOWFIN is not set -# CONFIG_R8169 is not set -# CONFIG_SIS190 is not set -# CONFIG_SK98LIN is not set -# CONFIG_TIGON3 is not set - -# -# Ethernet (10000 Mbit) -# -# CONFIG_IXGB is not set -CONFIG_IBM_EMAC=y -# CONFIG_IBM_EMAC_ERRMSG is not set -CONFIG_IBM_EMAC_RXB=64 -CONFIG_IBM_EMAC_TXB=8 -CONFIG_IBM_EMAC_FGAP=8 -CONFIG_IBM_EMAC_SKBRES=0 -# CONFIG_FDDI is not set -# CONFIG_HIPPI is not set -# CONFIG_PPP is not set -# CONFIG_SLIP is not set - -# -# Wireless LAN (non-hamradio) -# -# CONFIG_NET_RADIO is not set - -# -# Token Ring devices -# -# CONFIG_TR is not set -# CONFIG_RCPCI is not set -# CONFIG_SHAPER is not set -# CONFIG_NETCONSOLE is not set - -# -# Wan interfaces -# -# CONFIG_WAN is not set - -# -# Amateur Radio support -# -# CONFIG_HAMRADIO is not set - -# -# IrDA (infrared) support -# -# CONFIG_IRDA is not set - -# -# Bluetooth support -# -# CONFIG_BT is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set - -# -# ISDN subsystem -# -# CONFIG_ISDN is not set - -# -# Telephony Support -# -# CONFIG_PHONE is not set - -# -# Input device support -# -CONFIG_INPUT=y - -# -# Userland interfaces -# -CONFIG_INPUT_MOUSEDEV=y -CONFIG_INPUT_MOUSEDEV_PSAUX=y -CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 -# CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set -# CONFIG_INPUT_EVDEV is not set -# CONFIG_INPUT_EVBUG is not set - -# -# Input I/O drivers -# -# CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y -CONFIG_SERIO=y -CONFIG_SERIO_I8042=y -CONFIG_SERIO_SERPORT=y -# CONFIG_SERIO_CT82C710 is not set -# CONFIG_SERIO_PCIPS2 is not set - -# -# Input Device Drivers -# -CONFIG_INPUT_KEYBOARD=y -CONFIG_KEYBOARD_ATKBD=y -# CONFIG_KEYBOARD_SUNKBD is not set -# CONFIG_KEYBOARD_LKKBD is not set -# CONFIG_KEYBOARD_XTKBD is not set -# CONFIG_KEYBOARD_NEWTON is not set -CONFIG_INPUT_MOUSE=y -CONFIG_MOUSE_PS2=y -# CONFIG_MOUSE_SERIAL is not set -# CONFIG_MOUSE_VSXXXAA is not set -# CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TOUCHSCREEN is not set -# CONFIG_INPUT_MISC is not set - -# -# Character devices -# -# CONFIG_VT is not set -# CONFIG_SERIAL_NONSTANDARD is not set - -# -# Serial drivers -# -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_NR_UARTS=4 -# CONFIG_SERIAL_8250_EXTENDED is not set - -# -# Non-8250 serial port support -# -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -CONFIG_UNIX98_PTYS=y -CONFIG_LEGACY_PTYS=y -CONFIG_LEGACY_PTY_COUNT=256 -# CONFIG_QIC02_TAPE is not set - -# -# IPMI -# -# CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -CONFIG_WATCHDOG=y -# CONFIG_WATCHDOG_NOWAYOUT is not set - -# -# Watchdog Device Drivers -# -# CONFIG_SOFT_WATCHDOG is not set - -# -# PCI-based Watchdog Cards -# -# CONFIG_PCIPCWATCHDOG is not set -# CONFIG_WDTPCI is not set -# CONFIG_NVRAM is not set -CONFIG_GEN_RTC=y -# CONFIG_GEN_RTC_X is not set -# CONFIG_DTLK is not set -# CONFIG_R3964 is not set -# CONFIG_APPLICOM is not set - -# -# Ftape, the floppy tape device driver -# -# CONFIG_FTAPE is not set -# CONFIG_AGP is not set -# CONFIG_DRM is not set -# CONFIG_RAW_DRIVER is not set - -# -# I2C support -# -CONFIG_I2C=y -# CONFIG_I2C_CHARDEV is not set - -# -# I2C Algorithms -# -# CONFIG_I2C_ALGOBIT is not set -# CONFIG_I2C_ALGOPCF is not set - -# -# I2C Hardware Bus support -# -# CONFIG_I2C_ALI1535 is not set -# CONFIG_I2C_ALI15X3 is not set -# CONFIG_I2C_AMD756 is not set -# CONFIG_I2C_AMD8111 is not set -# CONFIG_I2C_I801 is not set -# CONFIG_I2C_I810 is not set -# CONFIG_I2C_IBM_IIC is not set -# CONFIG_I2C_ISA is not set -# CONFIG_I2C_NFORCE2 is not set -# CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_PIIX4 is not set -# CONFIG_I2C_PROSAVAGE is not set -# CONFIG_I2C_SAVAGE4 is not set -# CONFIG_SCx200_ACB is not set -# CONFIG_I2C_SIS5595 is not set -# CONFIG_I2C_SIS630 is not set -# CONFIG_I2C_SIS96X is not set -# CONFIG_I2C_VIA is not set -# CONFIG_I2C_VIAPRO is not set -# CONFIG_I2C_VOODOO3 is not set - -# -# Hardware Sensors Chip support -# -# CONFIG_I2C_SENSOR is not set -# CONFIG_SENSORS_ADM1021 is not set -# CONFIG_SENSORS_ASB100 is not set -# CONFIG_SENSORS_DS1621 is not set -# CONFIG_SENSORS_FSCHER is not set -# CONFIG_SENSORS_GL518SM is not set -# CONFIG_SENSORS_IT87 is not set -# CONFIG_SENSORS_LM75 is not set -# CONFIG_SENSORS_LM78 is not set -# CONFIG_SENSORS_LM80 is not set -# CONFIG_SENSORS_LM83 is not set -# CONFIG_SENSORS_LM85 is not set -# CONFIG_SENSORS_LM90 is not set -# CONFIG_SENSORS_VIA686A is not set -# CONFIG_SENSORS_W83781D is not set -# CONFIG_SENSORS_W83L785TS is not set -# CONFIG_SENSORS_W83627HF is not set - -# -# Other I2C Chip support -# -# CONFIG_SENSORS_EEPROM is not set -# CONFIG_I2C_DEBUG_CORE is not set -# CONFIG_I2C_DEBUG_ALGO is not set -# CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_I2C_DEBUG_CHIP is not set - -# -# Misc devices -# - -# -# Multimedia devices -# -# CONFIG_VIDEO_DEV is not set - -# -# Digital Video Broadcasting Devices -# -# CONFIG_DVB is not set - -# -# Graphics support -# -# CONFIG_FB is not set - -# -# Sound -# -# CONFIG_SOUND is not set - -# -# USB support -# -# CONFIG_USB is not set - -# -# USB Gadget Support -# -# CONFIG_USB_GADGET is not set - -# -# File systems -# -CONFIG_EXT2_FS=y -# CONFIG_EXT2_FS_XATTR is not set -# CONFIG_EXT3_FS is not set -# CONFIG_JBD is not set -# CONFIG_REISERFS_FS is not set -# CONFIG_JFS_FS is not set -# CONFIG_XFS_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set -# CONFIG_QUOTA is not set -# CONFIG_AUTOFS_FS is not set -# CONFIG_AUTOFS4_FS is not set - -# -# CD-ROM/DVD Filesystems -# -# CONFIG_ISO9660_FS is not set -# CONFIG_UDF_FS is not set - -# -# DOS/FAT/NT Filesystems -# -# CONFIG_FAT_FS is not set -# CONFIG_NTFS_FS is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -CONFIG_PROC_KCORE=y -# CONFIG_DEVFS_FS is not set -# CONFIG_DEVPTS_FS_XATTR is not set -CONFIG_TMPFS=y -# CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y - -# -# Miscellaneous filesystems -# -# CONFIG_ADFS_FS is not set -# CONFIG_AFFS_FS is not set -# CONFIG_HFS_FS is not set -# CONFIG_HFSPLUS_FS is not set -# CONFIG_BEFS_FS is not set -# CONFIG_BFS_FS is not set -# CONFIG_EFS_FS is not set -# CONFIG_CRAMFS is not set -# CONFIG_VXFS_FS is not set -# CONFIG_HPFS_FS is not set -# CONFIG_QNX4FS_FS is not set -# CONFIG_SYSV_FS is not set -# CONFIG_UFS_FS is not set - -# -# Network File Systems -# -CONFIG_NFS_FS=y -# CONFIG_NFS_V3 is not set -# CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set -# CONFIG_NFSD is not set -CONFIG_ROOT_NFS=y -CONFIG_LOCKD=y -# CONFIG_EXPORTFS is not set -CONFIG_SUNRPC=y -# CONFIG_RPCSEC_GSS_KRB5 is not set -# CONFIG_SMB_FS is not set -# CONFIG_CIFS is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_INTERMEZZO_FS is not set -# CONFIG_AFS_FS is not set - -# -# Partition Types -# -CONFIG_PARTITION_ADVANCED=y -# CONFIG_ACORN_PARTITION is not set -# CONFIG_OSF_PARTITION is not set -# CONFIG_AMIGA_PARTITION is not set -# CONFIG_ATARI_PARTITION is not set -# CONFIG_MAC_PARTITION is not set -# CONFIG_MSDOS_PARTITION is not set -# CONFIG_LDM_PARTITION is not set -# CONFIG_NEC98_PARTITION is not set -# CONFIG_SGI_PARTITION is not set -# CONFIG_ULTRIX_PARTITION is not set -# CONFIG_SUN_PARTITION is not set -# CONFIG_EFI_PARTITION is not set - -# -# Native Language Support -# -# CONFIG_NLS is not set - -# -# IBM 40x options -# - -# -# Library routines -# -CONFIG_CRC32=y - -# -# Kernel hacking -# -# CONFIG_DEBUG_KERNEL is not set -# CONFIG_SERIAL_TEXT_DEBUG is not set -CONFIG_OCP=y - -# -# Security options -# -# CONFIG_SECURITY is not set - -# -# Cryptographic options -# -# CONFIG_CRYPTO is not set diff --git a/arch/ppc/platforms/4xx/Kconfig b/arch/ppc/platforms/4xx/Kconfig index 805dd98908a..a7eaba91dfb 100644 --- a/arch/ppc/platforms/4xx/Kconfig +++ b/arch/ppc/platforms/4xx/Kconfig @@ -16,11 +16,6 @@ choice depends on 40x default WALNUT -config ASH - bool "Ash" - help - This option enables support for the IBM NP405H evaluation board. - config BUBINGA bool "Bubinga" select WANT_EARLY_SERIAL diff --git a/arch/ppc/platforms/4xx/Makefile b/arch/ppc/platforms/4xx/Makefile index 844c3b5066e..f00e0d02ee2 100644 --- a/arch/ppc/platforms/4xx/Makefile +++ b/arch/ppc/platforms/4xx/Makefile @@ -1,7 +1,6 @@ # # Makefile for the PowerPC 4xx linux kernel. -obj-$(CONFIG_ASH) += ash.o obj-$(CONFIG_BAMBOO) += bamboo.o obj-$(CONFIG_CPCI405) += cpci405.o obj-$(CONFIG_EBONY) += ebony.o diff --git a/arch/ppc/platforms/4xx/ash.c b/arch/ppc/platforms/4xx/ash.c deleted file mode 100644 index ce291179371..00000000000 --- a/arch/ppc/platforms/4xx/ash.c +++ /dev/null @@ -1,250 +0,0 @@ -/* - * arch/ppc/platforms/4xx/ash.c - * - * Support for the IBM NP405H ash eval board - * - * Author: Armin Kuster - * - * 2001-2002 (c) MontaVista, Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ -#include -#include -#include -#include - -#include -#include -#include -#include -#include -#include - -#ifdef DEBUG -#define DBG(x...) printk(x) -#else -#define DBG(x...) -#endif - -void *ash_rtc_base; - -/* Some IRQs unique to Walnut. - * Used by the generic 405 PCI setup functions in ppc4xx_pci.c - */ -int __init -ppc405_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin) -{ - static char pci_irq_table[][4] = - /* - * PCI IDSEL/INTPIN->INTLINE - * A B C D - */ - { - {24, 24, 24, 24}, /* IDSEL 1 - PCI slot 1 */ - {25, 25, 25, 25}, /* IDSEL 2 - PCI slot 2 */ - {26, 26, 26, 26}, /* IDSEL 3 - PCI slot 3 */ - {27, 27, 27, 27}, /* IDSEL 4 - PCI slot 4 */ - }; - - const long min_idsel = 1, max_idsel = 4, irqs_per_slot = 4; - return PCI_IRQ_TABLE_LOOKUP; -} - -void __init -ash_setup_arch(void) -{ - ppc4xx_setup_arch(); - - ibm_ocp_set_emac(0, 3); - -#ifdef CONFIG_DEBUG_BRINGUP - int i; - printk("\n"); - printk("machine\t: %s\n", PPC4xx_MACHINE_NAME); - printk("\n"); - printk("bi_s_version\t %s\n", bip->bi_s_version); - printk("bi_r_version\t %s\n", bip->bi_r_version); - printk("bi_memsize\t 0x%8.8x\t %dMBytes\n", bip->bi_memsize, - bip->bi_memsize / (1024 * 1000)); - for (i = 0; i < EMAC_NUMS; i++) { - printk("bi_enetaddr %d\t %2.2x%2.2x%2.2x-%2.2x%2.2x%2.2x\n", i, - bip->bi_enetaddr[i][0], bip->bi_enetaddr[i][1], - bip->bi_enetaddr[i][2], bip->bi_enetaddr[i][3], - bip->bi_enetaddr[i][4], bip->bi_enetaddr[i][5]); - } - printk("bi_pci_enetaddr %d\t %2.2x%2.2x%2.2x-%2.2x%2.2x%2.2x\n", 0, - bip->bi_pci_enetaddr[0], bip->bi_pci_enetaddr[1], - bip->bi_pci_enetaddr[2], bip->bi_pci_enetaddr[3], - bip->bi_pci_enetaddr[4], bip->bi_pci_enetaddr[5]); - - printk("bi_intfreq\t 0x%8.8x\t clock:\t %dMhz\n", - bip->bi_intfreq, bip->bi_intfreq / 1000000); - - printk("bi_busfreq\t 0x%8.8x\t plb bus clock:\t %dMHz\n", - bip->bi_busfreq, bip->bi_busfreq / 1000000); - printk("bi_pci_busfreq\t 0x%8.8x\t pci bus clock:\t %dMHz\n", - bip->bi_pci_busfreq, bip->bi_pci_busfreq / 1000000); - - printk("\n"); -#endif - /* RTC step for ash */ - ash_rtc_base = (void *) ASH_RTC_VADDR; - TODC_INIT(TODC_TYPE_DS1743, ash_rtc_base, ash_rtc_base, ash_rtc_base, - 8); -} - -void __init -bios_fixup(struct pci_controller *hose, struct pcil0_regs *pcip) -{ - /* - * Expected PCI mapping: - * - * PLB addr PCI memory addr - * --------------------- --------------------- - * 0000'0000 - 7fff'ffff <--- 0000'0000 - 7fff'ffff - * 8000'0000 - Bfff'ffff ---> 8000'0000 - Bfff'ffff - * - * PLB addr PCI io addr - * --------------------- --------------------- - * e800'0000 - e800'ffff ---> 0000'0000 - 0001'0000 - * - * The following code is simplified by assuming that the bootrom - * has been well behaved in following this mapping. - */ - -#ifdef DEBUG - int i; - - printk("ioremap PCLIO_BASE = 0x%x\n", pcip); - printk("PCI bridge regs before fixup \n"); - for (i = 0; i <= 2; i++) { - printk(" pmm%dma\t0x%x\n", i, in_le32(&(pcip->pmm[i].ma))); - printk(" pmm%dla\t0x%x\n", i, in_le32(&(pcip->pmm[i].la))); - printk(" pmm%dpcila\t0x%x\n", i, - in_le32(&(pcip->pmm[i].pcila))); - printk(" pmm%dpciha\t0x%x\n", i, - in_le32(&(pcip->pmm[i].pciha))); - } - printk(" ptm1ms\t0x%x\n", in_le32(&(pcip->ptm1ms))); - printk(" ptm1la\t0x%x\n", in_le32(&(pcip->ptm1la))); - printk(" ptm2ms\t0x%x\n", in_le32(&(pcip->ptm2ms))); - printk(" ptm2la\t0x%x\n", in_le32(&(pcip->ptm2la))); - for (bar = PCI_BASE_ADDRESS_1; bar <= PCI_BASE_ADDRESS_2; bar += 4) { - early_read_config_dword(hose, hose->first_busno, - PCI_FUNC(hose->first_busno), bar, - &bar_response); - DBG("BUS %d, device %d, Function %d bar 0x%8.8x is 0x%8.8x\n", - hose->first_busno, PCI_SLOT(hose->first_busno), - PCI_FUNC(hose->first_busno), bar, bar_response); - } - -#endif - if (ppc_md.progress) - ppc_md.progress("bios_fixup(): enter", 0x800); - - /* added for IBM boot rom version 1.15 bios bar changes -AK */ - - /* Disable region first */ - out_le32((void *) &(pcip->pmm[0].ma), 0x00000000); - /* PLB starting addr, PCI: 0x80000000 */ - out_le32((void *) &(pcip->pmm[0].la), 0x80000000); - /* PCI start addr, 0x80000000 */ - out_le32((void *) &(pcip->pmm[0].pcila), PPC405_PCI_MEM_BASE); - /* 512MB range of PLB to PCI */ - out_le32((void *) &(pcip->pmm[0].pciha), 0x00000000); - /* Enable no pre-fetch, enable region */ - out_le32((void *) &(pcip->pmm[0].ma), ((0xffffffff - - (PPC405_PCI_UPPER_MEM - - PPC405_PCI_MEM_BASE)) | 0x01)); - - /* Disable region one */ - out_le32((void *) &(pcip->pmm[1].ma), 0x00000000); - out_le32((void *) &(pcip->pmm[1].la), 0x00000000); - out_le32((void *) &(pcip->pmm[1].pcila), 0x00000000); - out_le32((void *) &(pcip->pmm[1].pciha), 0x00000000); - out_le32((void *) &(pcip->pmm[1].ma), 0x00000000); - - /* Disable region two */ - out_le32((void *) &(pcip->pmm[2].ma), 0x00000000); - out_le32((void *) &(pcip->pmm[2].la), 0x00000000); - out_le32((void *) &(pcip->pmm[2].pcila), 0x00000000); - out_le32((void *) &(pcip->pmm[2].pciha), 0x00000000); - out_le32((void *) &(pcip->pmm[2].ma), 0x00000000); - - /* Enable PTM1 and PTM2, mapped to PLB address 0. */ - - out_le32((void *) &(pcip->ptm1la), 0x00000000); - out_le32((void *) &(pcip->ptm1ms), 0x00000001); - out_le32((void *) &(pcip->ptm2la), 0x00000000); - out_le32((void *) &(pcip->ptm2ms), 0x00000001); - - /* Write zero to PTM1 BAR. */ - - early_write_config_dword(hose, hose->first_busno, - PCI_FUNC(hose->first_busno), - PCI_BASE_ADDRESS_1, - 0x00000000); - - /* Disable PTM2 (unused) */ - - out_le32((void *) &(pcip->ptm2la), 0x00000000); - out_le32((void *) &(pcip->ptm2ms), 0x00000000); - - /* end work arround */ - if (ppc_md.progress) - ppc_md.progress("bios_fixup(): done", 0x800); - -#ifdef DEBUG - printk("PCI bridge regs after fixup \n"); - for (i = 0; i <= 2; i++) { - printk(" pmm%dma\t0x%x\n", i, in_le32(&(pcip->pmm[i].ma))); - printk(" pmm%dla\t0x%x\n", i, in_le32(&(pcip->pmm[i].la))); - printk(" pmm%dpcila\t0x%x\n", i, - in_le32(&(pcip->pmm[i].pcila))); - printk(" pmm%dpciha\t0x%x\n", i, - in_le32(&(pcip->pmm[i].pciha))); - } - printk(" ptm1ms\t0x%x\n", in_le32(&(pcip->ptm1ms))); - printk(" ptm1la\t0x%x\n", in_le32(&(pcip->ptm1la))); - printk(" ptm2ms\t0x%x\n", in_le32(&(pcip->ptm2ms))); - printk(" ptm2la\t0x%x\n", in_le32(&(pcip->ptm2la))); - - for (bar = PCI_BASE_ADDRESS_1; bar <= PCI_BASE_ADDRESS_2; bar += 4) { - early_read_config_dword(hose, hose->first_busno, - PCI_FUNC(hose->first_busno), bar, - &bar_response); - DBG("BUS %d, device %d, Function %d bar 0x%8.8x is 0x%8.8x\n", - hose->first_busno, PCI_SLOT(hose->first_busno), - PCI_FUNC(hose->first_busno), bar, bar_response); - } - - -#endif -} - -void __init -ash_map_io(void) -{ - ppc4xx_map_io(); - io_block_mapping(ASH_RTC_VADDR, ASH_RTC_PADDR, ASH_RTC_SIZE, _PAGE_IO); -} - -void __init -platform_init(unsigned long r3, unsigned long r4, unsigned long r5, - unsigned long r6, unsigned long r7) -{ - ppc4xx_init(r3, r4, r5, r6, r7); - - ppc_md.setup_arch = ash_setup_arch; - ppc_md.setup_io_mappings = ash_map_io; - -#ifdef CONFIG_PPC_RTC - ppc_md.time_init = todc_time_init; - ppc_md.set_rtc_time = todc_set_rtc_time; - ppc_md.get_rtc_time = todc_get_rtc_time; - ppc_md.nvram_read_val = todc_direct_read_val; - ppc_md.nvram_write_val = todc_direct_write_val; -#endif -} diff --git a/arch/ppc/platforms/4xx/ash.h b/arch/ppc/platforms/4xx/ash.h deleted file mode 100644 index 5f7448ea418..00000000000 --- a/arch/ppc/platforms/4xx/ash.h +++ /dev/null @@ -1,83 +0,0 @@ -/* - * arch/ppc/platforms/4xx/ash.h - * - * Macros, definitions, and data structures specific to the IBM PowerPC - * Ash eval board. - * - * Author: Armin Kuster - * - * 2000-2002 (c) MontaVista, Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ - -#ifdef __KERNEL__ -#ifndef __ASM_ASH_H__ -#define __ASM_ASH_H__ -#include - -#ifndef __ASSEMBLY__ -/* - * Data structure defining board information maintained by the boot - * ROM on IBM's "Ash" evaluation board. An effort has been made to - * keep the field names consistent with the 8xx 'bd_t' board info - * structures. - */ - -typedef struct board_info { - unsigned char bi_s_version[4]; /* Version of this structure */ - unsigned char bi_r_version[30]; /* Version of the IBM ROM */ - unsigned int bi_memsize; /* DRAM installed, in bytes */ - unsigned char bi_enetaddr[4][6]; /* Local Ethernet MAC address */ - unsigned char bi_pci_enetaddr[6]; - unsigned int bi_intfreq; /* Processor speed, in Hz */ - unsigned int bi_busfreq; /* PLB Bus speed, in Hz */ - unsigned int bi_pci_busfreq; /* PCI speed in Hz */ -} bd_t; - -/* Some 4xx parts use a different timebase frequency from the internal clock. -*/ -#define bi_tbfreq bi_intfreq - -/* Memory map for the IBM "Ash" NP405H evaluation board. - */ - -extern void *ash_rtc_base; -#define ASH_RTC_PADDR ((uint)0xf0000000) -#define ASH_RTC_VADDR ASH_RTC_PADDR -#define ASH_RTC_SIZE ((uint)8*1024) - - -/* Early initialization address mapping for block_io. - * Standard 405GP map. - */ -#define PPC4xx_PCI_IO_PADDR ((uint)PPC405_PCI_PHY_IO_BASE) -#define PPC4xx_PCI_IO_VADDR PPC4xx_PCI_IO_PADDR -#define PPC4xx_PCI_IO_SIZE ((uint)64*1024) -#define PPC4xx_PCI_CFG_PADDR ((uint)PPC405_PCI_CONFIG_ADDR) -#define PPC4xx_PCI_CFG_VADDR PPC4xx_PCI_CFG_PADDR -#define PPC4xx_PCI_CFG_SIZE ((uint)4*1024) -#define PPC4xx_PCI_LCFG_PADDR ((uint)0xef400000) -#define PPC4xx_PCI_LCFG_VADDR PPC4xx_PCI_LCFG_PADDR -#define PPC4xx_PCI_LCFG_SIZE ((uint)4*1024) -#define PPC4xx_ONB_IO_PADDR ((uint)0xef600000) -#define PPC4xx_ONB_IO_VADDR PPC4xx_ONB_IO_PADDR -#define PPC4xx_ONB_IO_SIZE ((uint)4*1024) - -#define NR_BOARD_IRQS 32 - -#ifdef CONFIG_PPC405GP_INTERNAL_CLOCK -#define BASE_BAUD 201600 -#else -#define BASE_BAUD 691200 -#endif - -#define PPC4xx_MACHINE_NAME "IBM NP405H Ash" - -extern char pci_irq_table[][4]; - - -#endif /* !__ASSEMBLY__ */ -#endif /* __ASM_ASH_H__ */ -#endif /* __KERNEL__ */ diff --git a/arch/ppc/syslib/ppc4xx_setup.c b/arch/ppc/syslib/ppc4xx_setup.c index e170aebeb69..795b966e696 100644 --- a/arch/ppc/syslib/ppc4xx_setup.c +++ b/arch/ppc/syslib/ppc4xx_setup.c @@ -171,7 +171,7 @@ ppc4xx_calibrate_decr(void) unsigned int freq; bd_t *bip = &__res; -#if defined(CONFIG_WALNUT) || defined(CONFIG_ASH) || defined(CONFIG_SYCAMORE) +#if defined(CONFIG_WALNUT) || defined(CONFIG_SYCAMORE) /* Walnut boot rom sets DCR CHCR1 (aka CPC0_CR1) bit CETE to 1 */ mtdcr(DCRN_CHCR1, mfdcr(DCRN_CHCR1) & ~CHR1_CETE); #endif -- cgit v1.2.3-70-g09d2