From ff255c6caa389c90c68f5421f60ebfc40b68ea1b Mon Sep 17 00:00:00 2001 From: David Brownell Date: Sun, 21 Jun 2009 14:50:12 -0700 Subject: davinci: dm365 evm cpld support: leds, card detect, other setup Add basic support for the CPLD on the DM365 EVM board: - Read SW5 to set up NAND and keypad vs (someday) OneNAND - Export MMC/SD card detect and writeprotect signals - LED support (same layout as on DM355 EVM) - Static config for video input: * external HD imager precludes MMC1, Ethernet, audio * else either tvp5146 (SD/default) or tvp7002 (HD) The video input could actually be switched around dynamically; change that if/when that's needed (and after those other video inputs have driver support). Signed-off-by: David Brownell Signed-off-by: Kevin Hilman --- arch/arm/mach-davinci/board-dm365-evm.c | 263 ++++++++++++++++++++++++++++++-- 1 file changed, 253 insertions(+), 10 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-davinci/board-dm365-evm.c b/arch/arm/mach-davinci/board-dm365-evm.c index 3675e844b9b..a1d5e7dac74 100644 --- a/arch/arm/mach-davinci/board-dm365-evm.c +++ b/arch/arm/mach-davinci/board-dm365-evm.c @@ -20,6 +20,7 @@ #include #include #include +#include #include #include #include @@ -33,18 +34,71 @@ #include #include #include -#include #include #include #include #include + +static inline int have_imager(void) +{ + /* REVISIT when it's supported, trigger via Kconfig */ + return 0; +} + +static inline int have_tvp7002(void) +{ + /* REVISIT when it's supported, trigger via Kconfig */ + return 0; +} + + #define DM365_ASYNC_EMIF_CONTROL_BASE 0x01d10000 #define DM365_ASYNC_EMIF_DATA_CE0_BASE 0x02000000 +#define DM365_ASYNC_EMIF_DATA_CE1_BASE 0x04000000 #define DM365_EVM_PHY_MASK (0x2) #define DM365_EVM_MDIO_FREQUENCY (2200000) /* PHY bus frequency */ +/* + * A MAX-II CPLD is used for various board control functions. + */ +#define CPLD_OFFSET(a13a8,a2a1) (((a13a8) << 10) + ((a2a1) << 3)) + +#define CPLD_VERSION CPLD_OFFSET(0,0) /* r/o */ +#define CPLD_TEST CPLD_OFFSET(0,1) +#define CPLD_LEDS CPLD_OFFSET(0,2) +#define CPLD_MUX CPLD_OFFSET(0,3) +#define CPLD_SWITCH CPLD_OFFSET(1,0) /* r/o */ +#define CPLD_POWER CPLD_OFFSET(1,1) +#define CPLD_VIDEO CPLD_OFFSET(1,2) +#define CPLD_CARDSTAT CPLD_OFFSET(1,3) /* r/o */ + +#define CPLD_DILC_OUT CPLD_OFFSET(2,0) +#define CPLD_DILC_IN CPLD_OFFSET(2,1) /* r/o */ + +#define CPLD_IMG_DIR0 CPLD_OFFSET(2,2) +#define CPLD_IMG_MUX0 CPLD_OFFSET(2,3) +#define CPLD_IMG_MUX1 CPLD_OFFSET(3,0) +#define CPLD_IMG_DIR1 CPLD_OFFSET(3,1) +#define CPLD_IMG_MUX2 CPLD_OFFSET(3,2) +#define CPLD_IMG_MUX3 CPLD_OFFSET(3,3) +#define CPLD_IMG_DIR2 CPLD_OFFSET(4,0) +#define CPLD_IMG_MUX4 CPLD_OFFSET(4,1) +#define CPLD_IMG_MUX5 CPLD_OFFSET(4,2) + +#define CPLD_RESETS CPLD_OFFSET(4,3) + +#define CPLD_CCD_DIR1 CPLD_OFFSET(0x3e,0) +#define CPLD_CCD_IO1 CPLD_OFFSET(0x3e,1) +#define CPLD_CCD_DIR2 CPLD_OFFSET(0x3e,2) +#define CPLD_CCD_IO2 CPLD_OFFSET(0x3e,3) +#define CPLD_CCD_DIR3 CPLD_OFFSET(0x3f,0) +#define CPLD_CCD_IO3 CPLD_OFFSET(0x3f,1) + +static void __iomem *cpld; + + /* NOTE: this is geared for the standard config, with a socketed * 2 GByte Micron NAND (MT29F16G08FAA) using 128KB sectors. If you * swap chips with a different block size, partitioning will @@ -135,7 +189,27 @@ static struct davinci_i2c_platform_data i2c_pdata = { .bus_delay = 0 /* usec */, }; +static int cpld_mmc_get_cd(int module) +{ + if (!cpld) + return -ENXIO; + + /* low == card present */ + return !(__raw_readb(cpld + CPLD_CARDSTAT) & BIT(module ? 4 : 0)); +} + +static int cpld_mmc_get_ro(int module) +{ + if (!cpld) + return -ENXIO; + + /* high == card's write protect switch active */ + return !!(__raw_readb(cpld + CPLD_CARDSTAT) & BIT(module ? 5 : 1)); +} + static struct davinci_mmc_config dm365evm_mmc_config = { + .get_cd = cpld_mmc_get_cd, + .get_ro = cpld_mmc_get_ro, .wires = 4, .max_freq = 50000000, .caps = MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED, @@ -199,10 +273,185 @@ static void __init evm_init_i2c(void) i2c_register_board_info(1, i2c_info, ARRAY_SIZE(i2c_info)); } -static struct platform_device *dm365_evm_devices[] __initdata = { +static struct platform_device *dm365_evm_nand_devices[] __initdata = { &davinci_nand_device, }; +static inline int have_leds(void) +{ +#ifdef CONFIG_LEDS_CLASS + return 1; +#else + return 0; +#endif +} + +struct cpld_led { + struct led_classdev cdev; + u8 mask; +}; + +static const struct { + const char *name; + const char *trigger; +} cpld_leds[] = { + { "dm365evm::ds2", }, + { "dm365evm::ds3", }, + { "dm365evm::ds4", }, + { "dm365evm::ds5", }, + { "dm365evm::ds6", "nand-disk", }, + { "dm365evm::ds7", "mmc1", }, + { "dm365evm::ds8", "mmc0", }, + { "dm365evm::ds9", "heartbeat", }, +}; + +static void cpld_led_set(struct led_classdev *cdev, enum led_brightness b) +{ + struct cpld_led *led = container_of(cdev, struct cpld_led, cdev); + u8 reg = __raw_readb(cpld + CPLD_LEDS); + + if (b != LED_OFF) + reg &= ~led->mask; + else + reg |= led->mask; + __raw_writeb(reg, cpld + CPLD_LEDS); +} + +static enum led_brightness cpld_led_get(struct led_classdev *cdev) +{ + struct cpld_led *led = container_of(cdev, struct cpld_led, cdev); + u8 reg = __raw_readb(cpld + CPLD_LEDS); + + return (reg & led->mask) ? LED_OFF : LED_FULL; +} + +static int __init cpld_leds_init(void) +{ + int i; + + if (!have_leds() || !cpld) + return 0; + + /* setup LEDs */ + __raw_writeb(0xff, cpld + CPLD_LEDS); + for (i = 0; i < ARRAY_SIZE(cpld_leds); i++) { + struct cpld_led *led; + + led = kzalloc(sizeof(*led), GFP_KERNEL); + if (!led) + break; + + led->cdev.name = cpld_leds[i].name; + led->cdev.brightness_set = cpld_led_set; + led->cdev.brightness_get = cpld_led_get; + led->cdev.default_trigger = cpld_leds[i].trigger; + led->mask = BIT(i); + + if (led_classdev_register(NULL, &led->cdev) < 0) { + kfree(led); + break; + } + } + + return 0; +} +/* run after subsys_initcall() for LEDs */ +fs_initcall(cpld_leds_init); + + +static void __init evm_init_cpld(void) +{ + u8 mux, resets; + const char *label; + struct clk *aemif_clk; + + /* Make sure we can configure the CPLD through CS1. Then + * leave it on for later access to MMC and LED registers. + */ + aemif_clk = clk_get(NULL, "aemif"); + if (IS_ERR(aemif_clk)) + return; + clk_enable(aemif_clk); + + if (request_mem_region(DM365_ASYNC_EMIF_DATA_CE1_BASE, SECTION_SIZE, + "cpld") == NULL) + goto fail; + cpld = ioremap(DM365_ASYNC_EMIF_DATA_CE1_BASE, SECTION_SIZE); + if (!cpld) { + release_mem_region(DM365_ASYNC_EMIF_DATA_CE1_BASE, + SECTION_SIZE); +fail: + pr_err("ERROR: can't map CPLD\n"); + clk_disable(aemif_clk); + return; + } + + /* External muxing for some signals */ + mux = 0; + + /* Read SW5 to set up NAND + keypad _or_ OneNAND (sync read). + * NOTE: SW4 bus width setting must match! + */ + if ((__raw_readb(cpld + CPLD_SWITCH) & BIT(5)) == 0) { + /* external keypad mux */ + mux |= BIT(7); + + platform_add_devices(dm365_evm_nand_devices, + ARRAY_SIZE(dm365_evm_nand_devices)); + } else { + /* no OneNAND support yet */ + } + + /* Leave external chips in reset when unused. */ + resets = BIT(3) | BIT(2) | BIT(1) | BIT(0); + + /* Static video input config with SN74CBT16214 1-of-3 mux: + * - port b1 == tvp7002 (mux lowbits == 1 or 6) + * - port b2 == imager (mux lowbits == 2 or 7) + * - port b3 == tvp5146 (mux lowbits == 5) + * + * Runtime switching could work too, with limitations. + */ + if (have_imager()) { + label = "HD imager"; + mux |= 1; + + /* externally mux MMC1/ENET/AIC33 to imager */ + mux |= BIT(6) | BIT(5) | BIT(3); + } else { + struct davinci_soc_info *soc_info = &davinci_soc_info; + + /* we can use MMC1 ... */ + dm365evm_mmc_configure(); + davinci_setup_mmc(1, &dm365evm_mmc_config); + + /* ... and ENET ... */ + dm365evm_emac_configure(); + soc_info->emac_pdata->phy_mask = DM365_EVM_PHY_MASK; + soc_info->emac_pdata->mdio_max_freq = DM365_EVM_MDIO_FREQUENCY; + resets &= ~BIT(3); + + /* ... and AIC33 */ + resets &= ~BIT(1); + + if (have_tvp7002()) { + mux |= 2; + resets &= ~BIT(2); + label = "tvp7002 HD"; + } else { + /* default to tvp5146 */ + mux |= 5; + resets &= ~BIT(0); + label = "tvp5146 SD"; + } + } + __raw_writeb(mux, cpld + CPLD_MUX); + __raw_writeb(resets, cpld + CPLD_RESETS); + pr_info("EVM: %s video input\n", label); + + /* REVISIT export switches: NTSC/PAL (SW5.6), EXTRA1 (SW5.2), etc */ +} + static struct davinci_uart_config uart_config __initdata = { .enabled_uarts = (1 << 0), }; @@ -214,11 +463,6 @@ static void __init dm365_evm_map_io(void) static __init void dm365_evm_init(void) { - struct davinci_soc_info *soc_info = &davinci_soc_info; - - platform_add_devices(dm365_evm_devices, - ARRAY_SIZE(dm365_evm_devices)); - evm_init_i2c(); davinci_serial_init(&uart_config); @@ -226,10 +470,9 @@ static __init void dm365_evm_init(void) dm365evm_mmc_configure(); davinci_setup_mmc(0, &dm365evm_mmc_config); - davinci_setup_mmc(1, &dm365evm_mmc_config); - soc_info->emac_pdata->phy_mask = DM365_EVM_PHY_MASK; - soc_info->emac_pdata->mdio_max_freq = DM365_EVM_MDIO_FREQUENCY; + /* maybe setup mmc1/etc ... _after_ mmc0 */ + evm_init_cpld(); } static __init void dm365_evm_irq_init(void) -- cgit v1.2.3-70-g09d2