From 95b482a8d31116f3f5c2a5089569393234d06385 Mon Sep 17 00:00:00 2001 From: Len Brown Date: Fri, 9 Jan 2009 00:13:17 -0500 Subject: ACPICA: create acpica/ directory also, delete sleep/ and delete ACPI_CFLAGS from Makefile Signed-off-by: Len Brown --- drivers/acpi/acpica/nseval.c | 278 +++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 278 insertions(+) create mode 100644 drivers/acpi/acpica/nseval.c (limited to 'drivers/acpi/acpica/nseval.c') diff --git a/drivers/acpi/acpica/nseval.c b/drivers/acpi/acpica/nseval.c new file mode 100644 index 00000000000..a8d7764c73b --- /dev/null +++ b/drivers/acpi/acpica/nseval.c @@ -0,0 +1,278 @@ +/******************************************************************************* + * + * Module Name: nseval - Object evaluation, includes control method execution + * + ******************************************************************************/ + +/* + * Copyright (C) 2000 - 2008, Intel Corp. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions, and the following disclaimer, + * without modification. + * 2. Redistributions in binary form must reproduce at minimum a disclaimer + * substantially similar to the "NO WARRANTY" disclaimer below + * ("Disclaimer") and any redistribution must be conditioned upon + * including a substantially similar Disclaimer requirement for further + * binary redistribution. + * 3. Neither the names of the above-listed copyright holders nor the names + * of any contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * Alternatively, this software may be distributed under the terms of the + * GNU General Public License ("GPL") version 2 as published by the Free + * Software Foundation. + * + * NO WARRANTY + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING + * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGES. + */ + +#include +#include +#include +#include +#include + +#define _COMPONENT ACPI_NAMESPACE +ACPI_MODULE_NAME("nseval") + +/******************************************************************************* + * + * FUNCTION: acpi_ns_evaluate + * + * PARAMETERS: Info - Evaluation info block, contains: + * prefix_node - Prefix or Method/Object Node to execute + * Pathname - Name of method to execute, If NULL, the + * Node is the object to execute + * Parameters - List of parameters to pass to the method, + * terminated by NULL. Params itself may be + * NULL if no parameters are being passed. + * return_object - Where to put method's return value (if + * any). If NULL, no value is returned. + * parameter_type - Type of Parameter list + * return_object - Where to put method's return value (if + * any). If NULL, no value is returned. + * Flags - ACPI_IGNORE_RETURN_VALUE to delete return + * + * RETURN: Status + * + * DESCRIPTION: Execute a control method or return the current value of an + * ACPI namespace object. + * + * MUTEX: Locks interpreter + * + ******************************************************************************/ +acpi_status acpi_ns_evaluate(struct acpi_evaluate_info * info) +{ + acpi_status status; + struct acpi_namespace_node *node; + + ACPI_FUNCTION_TRACE(ns_evaluate); + + if (!info) { + return_ACPI_STATUS(AE_BAD_PARAMETER); + } + + /* Initialize the return value to an invalid object */ + + info->return_object = NULL; + info->param_count = 0; + + /* + * Get the actual namespace node for the target object. Handles these cases: + * + * 1) Null node, Pathname (absolute path) + * 2) Node, Pathname (path relative to Node) + * 3) Node, Null Pathname + */ + status = acpi_ns_get_node(info->prefix_node, info->pathname, + ACPI_NS_NO_UPSEARCH, &info->resolved_node); + if (ACPI_FAILURE(status)) { + return_ACPI_STATUS(status); + } + + /* + * For a method alias, we must grab the actual method node so that proper + * scoping context will be established before execution. + */ + if (acpi_ns_get_type(info->resolved_node) == + ACPI_TYPE_LOCAL_METHOD_ALIAS) { + info->resolved_node = + ACPI_CAST_PTR(struct acpi_namespace_node, + info->resolved_node->object); + } + + ACPI_DEBUG_PRINT((ACPI_DB_NAMES, "%s [%p] Value %p\n", info->pathname, + info->resolved_node, + acpi_ns_get_attached_object(info->resolved_node))); + + node = info->resolved_node; + + /* + * Two major cases here: + * + * 1) The object is a control method -- execute it + * 2) The object is not a method -- just return it's current value + */ + if (acpi_ns_get_type(info->resolved_node) == ACPI_TYPE_METHOD) { + /* + * 1) Object is a control method - execute it + */ + + /* Verify that there is a method object associated with this node */ + + info->obj_desc = + acpi_ns_get_attached_object(info->resolved_node); + if (!info->obj_desc) { + ACPI_ERROR((AE_INFO, + "Control method has no attached sub-object")); + return_ACPI_STATUS(AE_NULL_OBJECT); + } + + /* Count the number of arguments being passed to the method */ + + if (info->parameters) { + while (info->parameters[info->param_count]) { + if (info->param_count > ACPI_METHOD_MAX_ARG) { + return_ACPI_STATUS(AE_LIMIT); + } + info->param_count++; + } + } + + + ACPI_DUMP_PATHNAME(info->resolved_node, "Execute Method:", + ACPI_LV_INFO, _COMPONENT); + + ACPI_DEBUG_PRINT((ACPI_DB_EXEC, + "Method at AML address %p Length %X\n", + info->obj_desc->method.aml_start + 1, + info->obj_desc->method.aml_length - 1)); + + /* + * Any namespace deletion must acquire both the namespace and + * interpreter locks to ensure that no thread is using the portion of + * the namespace that is being deleted. + * + * Execute the method via the interpreter. The interpreter is locked + * here before calling into the AML parser + */ + acpi_ex_enter_interpreter(); + status = acpi_ps_execute_method(info); + acpi_ex_exit_interpreter(); + } else { + /* + * 2) Object is not a method, return its current value + * + * Disallow certain object types. For these, "evaluation" is undefined. + */ + switch (info->resolved_node->type) { + case ACPI_TYPE_DEVICE: + case ACPI_TYPE_EVENT: + case ACPI_TYPE_MUTEX: + case ACPI_TYPE_REGION: + case ACPI_TYPE_THERMAL: + case ACPI_TYPE_LOCAL_SCOPE: + + ACPI_ERROR((AE_INFO, + "[%4.4s] Evaluation of object type [%s] is not supported", + info->resolved_node->name.ascii, + acpi_ut_get_type_name(info->resolved_node-> + type))); + + return_ACPI_STATUS(AE_TYPE); + + default: + break; + } + + /* + * Objects require additional resolution steps (e.g., the Node may be + * a field that must be read, etc.) -- we can't just grab the object + * out of the node. + * + * Use resolve_node_to_value() to get the associated value. + * + * NOTE: we can get away with passing in NULL for a walk state because + * resolved_node is guaranteed to not be a reference to either a method + * local or a method argument (because this interface is never called + * from a running method.) + * + * Even though we do not directly invoke the interpreter for object + * resolution, we must lock it because we could access an opregion. + * The opregion access code assumes that the interpreter is locked. + */ + acpi_ex_enter_interpreter(); + + /* Function has a strange interface */ + + status = + acpi_ex_resolve_node_to_value(&info->resolved_node, NULL); + acpi_ex_exit_interpreter(); + + /* + * If acpi_ex_resolve_node_to_value() succeeded, the return value was placed + * in resolved_node. + */ + if (ACPI_SUCCESS(status)) { + status = AE_CTRL_RETURN_VALUE; + info->return_object = + ACPI_CAST_PTR(union acpi_operand_object, + info->resolved_node); + + ACPI_DEBUG_PRINT((ACPI_DB_NAMES, + "Returning object %p [%s]\n", + info->return_object, + acpi_ut_get_object_type_name(info-> + return_object))); + } + } + + /* + * Check input argument count against the ASL-defined count for a method. + * Also check predefined names: argument count and return value against + * the ACPI specification. Some incorrect return value types are repaired. + */ + (void)acpi_ns_check_predefined_names(node, info->param_count, + status, &info->return_object); + + /* Check if there is a return value that must be dealt with */ + + if (status == AE_CTRL_RETURN_VALUE) { + + /* If caller does not want the return value, delete it */ + + if (info->flags & ACPI_IGNORE_RETURN_VALUE) { + acpi_ut_remove_reference(info->return_object); + info->return_object = NULL; + } + + /* Map AE_CTRL_RETURN_VALUE to AE_OK, we are done with it */ + + status = AE_OK; + } + + ACPI_DEBUG_PRINT((ACPI_DB_NAMES, + "*** Completed evaluation of object %s ***\n", + info->pathname)); + + /* + * Namespace was unlocked by the handling acpi_ns* function, so we + * just return + */ + return_ACPI_STATUS(status); +} -- cgit v1.2.3-70-g09d2