From 5a0e3ad6af8660be21ca98a971cd00f331318c05 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 24 Mar 2010 17:04:11 +0900 Subject: include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo Guess-its-ok-by: Christoph Lameter Cc: Ingo Molnar Cc: Lee Schermerhorn --- drivers/acpi/scan.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/acpi/scan.c') diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c index 189cbc2585f..0261b116d05 100644 --- a/drivers/acpi/scan.c +++ b/drivers/acpi/scan.c @@ -4,6 +4,7 @@ #include #include +#include #include #include #include -- cgit v1.2.3-70-g09d2 From b7b30de53aef6ce773d34837ba7d8422bd3baeec Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Wed, 24 Mar 2010 10:44:33 -0600 Subject: ACPI: use _HID when supplied by root-level devices Previously, we assumed the only Device object immediately below the root was the \_SB Scope (which the ACPI CA treats as a Device), so we forced the HID of all such objects to ACPI_BUS_HID ("LNXSYBUS"). However, there are DSDTs that supply root-level Device objects with _HIDs. This patch makes us pay attention to those _HIDs and only add the synthetic ACPI_BUS_HID for root-level objects that do not supply their own _HID. For example, this DSDT: https://bugzilla.kernel.org/show_bug.cgi?id=15605 contains: Scope (_SB) { ... } Device (AMW0) { Name (_HID, EisaId ("PNP0C14")) ... } and we should use "PNP0C14" for the AMW0 device, not "LNXSYBUS". Signed-off-by: Bjorn Helgaas Acked-by: Zhang Rui Tested-by: Yong Wang Signed-off-by: Len Brown --- drivers/acpi/scan.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) (limited to 'drivers/acpi/scan.c') diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c index 189cbc2585f..95c90ff5b9a 100644 --- a/drivers/acpi/scan.c +++ b/drivers/acpi/scan.c @@ -1080,12 +1080,6 @@ static void acpi_device_set_id(struct acpi_device *device) if (ACPI_IS_ROOT_DEVICE(device)) { acpi_add_id(device, ACPI_SYSTEM_HID); break; - } else if (ACPI_IS_ROOT_DEVICE(device->parent)) { - /* \_SB_, the only root-level namespace device */ - acpi_add_id(device, ACPI_BUS_HID); - strcpy(device->pnp.device_name, ACPI_BUS_DEVICE_NAME); - strcpy(device->pnp.device_class, ACPI_BUS_CLASS); - break; } status = acpi_get_object_info(device->handle, &info); @@ -1120,6 +1114,12 @@ static void acpi_device_set_id(struct acpi_device *device) acpi_add_id(device, ACPI_DOCK_HID); else if (!acpi_ibm_smbus_match(device)) acpi_add_id(device, ACPI_SMBUS_IBM_HID); + else if (!acpi_device_hid(device) && + ACPI_IS_ROOT_DEVICE(device->parent)) { + acpi_add_id(device, ACPI_BUS_HID); /* \_SB, LNXSYBUS */ + strcpy(device->pnp.device_name, ACPI_BUS_DEVICE_NAME); + strcpy(device->pnp.device_class, ACPI_BUS_CLASS); + } break; case ACPI_BUS_TYPE_POWER: -- cgit v1.2.3-70-g09d2