From 7f9c9f8e24590e7dcd26ca408458c43df5b83e61 Mon Sep 17 00:00:00 2001 From: Hugh Daschbach Date: Fri, 4 Jan 2013 14:39:09 -0800 Subject: [libata] ahci: Add support for Enmotus Bobcat device. Silicon does not support standard AHCI BAR assignment. Add vendor/device exception to force BAR 2. Signed-off-by: Hugh Daschbach Signed-off-by: Jeff Garzik --- drivers/ata/ahci.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) (limited to 'drivers/ata/ahci.c') diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c index 7862d17976b..49791273256 100644 --- a/drivers/ata/ahci.c +++ b/drivers/ata/ahci.c @@ -53,6 +53,7 @@ enum { AHCI_PCI_BAR_STA2X11 = 0, + AHCI_PCI_BAR_ENMOTUS = 2, AHCI_PCI_BAR_STANDARD = 5, }; @@ -410,6 +411,9 @@ static const struct pci_device_id ahci_pci_tbl[] = { { PCI_VDEVICE(ASMEDIA, 0x0611), board_ahci }, /* ASM1061 */ { PCI_VDEVICE(ASMEDIA, 0x0612), board_ahci }, /* ASM1062 */ + /* Enmotus */ + { PCI_DEVICE(0x1c44, 0x8000), board_ahci }, + /* Generic, PCI class code for AHCI */ { PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_STORAGE_SATA_AHCI, 0xffffff, board_ahci }, @@ -1098,9 +1102,11 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) dev_info(&pdev->dev, "PDC42819 can only drive SATA devices with this driver\n"); - /* The Connext uses non-standard BAR */ + /* Both Connext and Enmotus devices use non-standard BARs */ if (pdev->vendor == PCI_VENDOR_ID_STMICRO && pdev->device == 0xCC06) ahci_pci_bar = AHCI_PCI_BAR_STA2X11; + else if (pdev->vendor == 0x1c44 && pdev->device == 0x8000) + ahci_pci_bar = AHCI_PCI_BAR_ENMOTUS; /* acquire resources */ rc = pcim_enable_device(pdev); -- cgit v1.2.3-70-g09d2