From 966fbe193f47c68e70a80ec9991098e88e7959cb Mon Sep 17 00:00:00 2001 From: Vincent Pelletier Date: Tue, 21 May 2013 22:30:58 +0200 Subject: libata: Add atapi_dmadir force flag Some device require DMADIR to be enabled, but are not detected as such by atapi_id_dmadir. One such example is "Asus Serillel 2" SATA-host-to-PATA-device bridge: the bridge itself requires DMADIR, even if the bridged device does not. As atapi_dmadir module parameter can cause problems with some devices (as per Tejun Heo's memory), enabling it globally may not be possible depending on the hardware. This patch adds atapi_dmadir in the form of a "force" horkage value, allowing global, per-bus and per-device control. Signed-off-by: Vincent Pelletier Signed-off-by: Tejun Heo --- drivers/ata/libata-core.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers/ata/libata-core.c') diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index 5f7d5f9ee82..c97a244c099 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -2395,7 +2395,7 @@ int ata_dev_configure(struct ata_device *dev) cdb_intr_string = ", CDB intr"; } - if (atapi_dmadir || atapi_id_dmadir(dev->id)) { + if (atapi_dmadir || (dev->horkage & ATA_HORKAGE_ATAPI_DMADIR) || atapi_id_dmadir(dev->id)) { dev->flags |= ATA_DFLAG_DMADIR; dma_dir_string = ", DMADIR"; } @@ -6496,6 +6496,7 @@ static int __init ata_parse_force_one(char **cur, { "nosrst", .lflags = ATA_LFLAG_NO_SRST }, { "norst", .lflags = ATA_LFLAG_NO_HRST | ATA_LFLAG_NO_SRST }, { "rstonce", .lflags = ATA_LFLAG_RST_ONCE }, + { "atapi_dmadir", .horkage_on = ATA_HORKAGE_ATAPI_DMADIR }, }; char *start = *cur, *p = *cur; char *id, *val, *endp; -- cgit v1.2.3-70-g09d2