From 394d6e535f15c6f2d3c7fe2e228ee595acf0648c Mon Sep 17 00:00:00 2001 From: Anton Vorontsov Date: Wed, 3 Mar 2010 20:17:36 +0300 Subject: ahci: Factor out PCI specifics from ahci_save_initial_config() Make ahci_save_initial_config() a bit more generic by introducing force_port_map and mask_port_map arguments. Move PCI stuff into ahci_pci_save_initial_config(). Signed-off-by: Anton Vorontsov Signed-off-by: Jeff Garzik --- drivers/ata/ahci.c | 66 ++++++++++++++++++++++++++++++++++-------------------- 1 file changed, 42 insertions(+), 24 deletions(-) (limited to 'drivers/ata') diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c index c720c2c5cef..530f0c1f179 100644 --- a/drivers/ata/ahci.c +++ b/drivers/ata/ahci.c @@ -842,6 +842,8 @@ static ssize_t ahci_show_port_cmd(struct device *dev, * ahci_save_initial_config - Save and fixup initial config values * @pdev: target PCI device * @hpriv: host private area to store config values + * @force_port_map: force port map to a specified value + * @mask_port_map: mask out particular bits from port map * * Some registers containing configuration info might be setup by * BIOS and might be cleared on reset. This function saves the @@ -854,12 +856,13 @@ static ssize_t ahci_show_port_cmd(struct device *dev, * None. */ static void ahci_save_initial_config(struct pci_dev *pdev, - struct ahci_host_priv *hpriv) + struct ahci_host_priv *hpriv, + unsigned int force_port_map, + unsigned int mask_port_map) { void __iomem *mmio = hpriv->mmio; u32 cap, cap2, vers, port_map; int i; - int mv; /* make sure AHCI mode is enabled before accessing CAP */ ahci_enable_ahci(mmio); @@ -909,32 +912,19 @@ static void ahci_save_initial_config(struct pci_dev *pdev, cap &= ~HOST_CAP_SNTF; } - if (pdev->vendor == PCI_VENDOR_ID_JMICRON && pdev->device == 0x2361 && - port_map != 1) { + if (force_port_map && port_map != force_port_map) { dev_printk(KERN_INFO, &pdev->dev, - "JMB361 has only one port, port_map 0x%x -> 0x%x\n", - port_map, 1); - port_map = 1; + "forcing port_map 0x%x -> 0x%x\n", + port_map, force_port_map); + port_map = force_port_map; } - /* - * Temporary Marvell 6145 hack: PATA port presence - * is asserted through the standard AHCI port - * presence register, as bit 4 (counting from 0) - */ - if (hpriv->flags & AHCI_HFLAG_MV_PATA) { - if (pdev->device == 0x6121) - mv = 0x3; - else - mv = 0xf; + if (mask_port_map) { dev_printk(KERN_ERR, &pdev->dev, - "MV_AHCI HACK: port_map %x -> %x\n", + "masking port_map 0x%x -> 0x%x\n", port_map, - port_map & mv); - dev_printk(KERN_ERR, &pdev->dev, - "Disabling your PATA port. Use the boot option 'ahci.marvell_enable=0' to avoid this.\n"); - - port_map &= mv; + port_map & mask_port_map); + port_map &= mask_port_map; } /* cross check port_map and cap.n_ports */ @@ -973,6 +963,34 @@ static void ahci_save_initial_config(struct pci_dev *pdev, hpriv->port_map = port_map; } +static void ahci_pci_save_initial_config(struct pci_dev *pdev, + struct ahci_host_priv *hpriv) +{ + unsigned int force_port_map = 0; + unsigned int mask_port_map = 0; + + if (pdev->vendor == PCI_VENDOR_ID_JMICRON && pdev->device == 0x2361) { + dev_info(&pdev->dev, "JMB361 has only one port\n"); + force_port_map = 1; + } + + /* + * Temporary Marvell 6145 hack: PATA port presence + * is asserted through the standard AHCI port + * presence register, as bit 4 (counting from 0) + */ + if (hpriv->flags & AHCI_HFLAG_MV_PATA) { + if (pdev->device == 0x6121) + mask_port_map = 0x3; + else + mask_port_map = 0xf; + dev_info(&pdev->dev, + "Disabling your PATA port. Use the boot option 'ahci.marvell_enable=0' to avoid this.\n"); + } + + ahci_save_initial_config(pdev, hpriv, force_port_map, mask_port_map); +} + /** * ahci_restore_initial_config - Restore initial config * @host: target ATA host @@ -3316,7 +3334,7 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) hpriv->mmio = pcim_iomap_table(pdev)[AHCI_PCI_BAR]; /* save initial config */ - ahci_save_initial_config(pdev, hpriv); + ahci_pci_save_initial_config(pdev, hpriv); /* prepare host */ if (hpriv->cap & HOST_CAP_NCQ) { -- cgit v1.2.3-70-g09d2