From 8c3d3d4b12bf8de8c59fe1eb1bf866a8676ca309 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Tue, 14 May 2013 11:09:50 -0700 Subject: libata: update "Maintained by:" tags Jeff moved on to a greener pasture. s/Maintained by: Jeff Garzik/Maintained by: Tejun Heo/g Signed-off-by: Tejun Heo Cc: Jeff Garzik --- drivers/ata/acard-ahci.c | 2 +- drivers/ata/ahci.c | 2 +- drivers/ata/ahci.h | 2 +- drivers/ata/ata_piix.c | 2 +- drivers/ata/libahci.c | 2 +- drivers/ata/libata-core.c | 2 +- drivers/ata/libata-eh.c | 2 +- drivers/ata/libata-scsi.c | 2 +- drivers/ata/libata-sff.c | 2 +- drivers/ata/pdc_adma.c | 2 +- drivers/ata/sata_promise.c | 2 +- drivers/ata/sata_sil.c | 2 +- drivers/ata/sata_sx4.c | 2 +- drivers/ata/sata_via.c | 2 +- 14 files changed, 14 insertions(+), 14 deletions(-) (limited to 'drivers/ata') diff --git a/drivers/ata/acard-ahci.c b/drivers/ata/acard-ahci.c index 4e94ba29cb8..9d0cf019ce5 100644 --- a/drivers/ata/acard-ahci.c +++ b/drivers/ata/acard-ahci.c @@ -2,7 +2,7 @@ /* * acard-ahci.c - ACard AHCI SATA support * - * Maintained by: Jeff Garzik + * Maintained by: Tejun Heo * Please ALWAYS copy linux-ide@vger.kernel.org * on emails. * diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c index 251e57d3894..21808766140 100644 --- a/drivers/ata/ahci.c +++ b/drivers/ata/ahci.c @@ -1,7 +1,7 @@ /* * ahci.c - AHCI SATA support * - * Maintained by: Jeff Garzik + * Maintained by: Tejun Heo * Please ALWAYS copy linux-ide@vger.kernel.org * on emails. * diff --git a/drivers/ata/ahci.h b/drivers/ata/ahci.h index b830e6c9fe4..10b14d45cfd 100644 --- a/drivers/ata/ahci.h +++ b/drivers/ata/ahci.h @@ -1,7 +1,7 @@ /* * ahci.h - Common AHCI SATA definitions and declarations * - * Maintained by: Jeff Garzik + * Maintained by: Tejun Heo * Please ALWAYS copy linux-ide@vger.kernel.org * on emails. * diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c index 2f48123d74c..26bda6ed9a0 100644 --- a/drivers/ata/ata_piix.c +++ b/drivers/ata/ata_piix.c @@ -1,7 +1,7 @@ /* * ata_piix.c - Intel PATA/SATA controllers * - * Maintained by: Jeff Garzik + * Maintained by: Tejun Heo * Please ALWAYS copy linux-ide@vger.kernel.org * on emails. * diff --git a/drivers/ata/libahci.c b/drivers/ata/libahci.c index 34c82167b96..a70ff154f58 100644 --- a/drivers/ata/libahci.c +++ b/drivers/ata/libahci.c @@ -1,7 +1,7 @@ /* * libahci.c - Common AHCI SATA low-level routines * - * Maintained by: Jeff Garzik + * Maintained by: Tejun Heo * Please ALWAYS copy linux-ide@vger.kernel.org * on emails. * diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index 63c743baf92..d35524c3390 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -1,7 +1,7 @@ /* * libata-core.c - helper library for ATA * - * Maintained by: Jeff Garzik + * Maintained by: Tejun Heo * Please ALWAYS copy linux-ide@vger.kernel.org * on emails. * diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c index f9476fb3ac4..c69fcce505c 100644 --- a/drivers/ata/libata-eh.c +++ b/drivers/ata/libata-eh.c @@ -1,7 +1,7 @@ /* * libata-eh.c - libata error handling * - * Maintained by: Jeff Garzik + * Maintained by: Tejun Heo * Please ALWAYS copy linux-ide@vger.kernel.org * on emails. * diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c index dd310b27b24..0101af54143 100644 --- a/drivers/ata/libata-scsi.c +++ b/drivers/ata/libata-scsi.c @@ -1,7 +1,7 @@ /* * libata-scsi.c - helper library for ATA * - * Maintained by: Jeff Garzik + * Maintained by: Tejun Heo * Please ALWAYS copy linux-ide@vger.kernel.org * on emails. * diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c index d8af325a6bd..b603720b877 100644 --- a/drivers/ata/libata-sff.c +++ b/drivers/ata/libata-sff.c @@ -1,7 +1,7 @@ /* * libata-sff.c - helper library for PCI IDE BMDMA * - * Maintained by: Jeff Garzik + * Maintained by: Tejun Heo * Please ALWAYS copy linux-ide@vger.kernel.org * on emails. * diff --git a/drivers/ata/pdc_adma.c b/drivers/ata/pdc_adma.c index 505333340ad..8ea6e6afd04 100644 --- a/drivers/ata/pdc_adma.c +++ b/drivers/ata/pdc_adma.c @@ -1,7 +1,7 @@ /* * pdc_adma.c - Pacific Digital Corporation ADMA * - * Maintained by: Mark Lord + * Maintained by: Tejun Heo * * Copyright 2005 Mark Lord * diff --git a/drivers/ata/sata_promise.c b/drivers/ata/sata_promise.c index fb0dd87f889..958ba2a420c 100644 --- a/drivers/ata/sata_promise.c +++ b/drivers/ata/sata_promise.c @@ -1,7 +1,7 @@ /* * sata_promise.c - Promise SATA * - * Maintained by: Jeff Garzik + * Maintained by: Tejun Heo * Mikael Pettersson * Please ALWAYS copy linux-ide@vger.kernel.org * on emails. diff --git a/drivers/ata/sata_sil.c b/drivers/ata/sata_sil.c index a7b31672c4b..0ae3ca4bf5c 100644 --- a/drivers/ata/sata_sil.c +++ b/drivers/ata/sata_sil.c @@ -1,7 +1,7 @@ /* * sata_sil.c - Silicon Image SATA * - * Maintained by: Jeff Garzik + * Maintained by: Tejun Heo * Please ALWAYS copy linux-ide@vger.kernel.org * on emails. * diff --git a/drivers/ata/sata_sx4.c b/drivers/ata/sata_sx4.c index 7b7127a58f5..9947010afc0 100644 --- a/drivers/ata/sata_sx4.c +++ b/drivers/ata/sata_sx4.c @@ -1,7 +1,7 @@ /* * sata_sx4.c - Promise SATA * - * Maintained by: Jeff Garzik + * Maintained by: Tejun Heo * Please ALWAYS copy linux-ide@vger.kernel.org * on emails. * diff --git a/drivers/ata/sata_via.c b/drivers/ata/sata_via.c index 5913ea9d57b..87f056e54a9 100644 --- a/drivers/ata/sata_via.c +++ b/drivers/ata/sata_via.c @@ -1,7 +1,7 @@ /* * sata_via.c - VIA Serial ATA controllers * - * Maintained by: Jeff Garzik + * Maintained by: Tejun Heo * Please ALWAYS copy linux-ide@vger.kernel.org * on emails. * -- cgit v1.2.3-70-g09d2 From fca8c90d519dedd4f4b19901d005c243f7f0bf2e Mon Sep 17 00:00:00 2001 From: "Chew, Chiau Ee" Date: Thu, 16 May 2013 15:33:29 +0800 Subject: ata_piix: add PCI IDs for Intel BayTail Adds IDE-mode SATA Device IDs for the Intel BayTrail platform. Signed-off-by: Chew, Chiau Ee Signed-off-by: Artem Bityutskiy Signed-off-by: Tejun Heo Cc: stable@vger.kernel.org --- drivers/ata/ata_piix.c | 15 +++++++++++++++ 1 file changed, 15 insertions(+) (limited to 'drivers/ata') diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c index 26bda6ed9a0..9a8a674e8fa 100644 --- a/drivers/ata/ata_piix.c +++ b/drivers/ata/ata_piix.c @@ -151,6 +151,7 @@ enum piix_controller_ids { piix_pata_vmw, /* PIIX4 for VMware, spurious DMA_ERR */ ich8_sata_snb, ich8_2port_sata_snb, + ich8_2port_sata_byt, }; struct piix_map_db { @@ -334,6 +335,9 @@ static const struct pci_device_id piix_pci_tbl[] = { { 0x8086, 0x8d60, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_snb }, /* SATA Controller IDE (Wellsburg) */ { 0x8086, 0x8d68, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata }, + /* SATA Controller IDE (BayTrail) */ + { 0x8086, 0x0F20, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata_byt }, + { 0x8086, 0x0F21, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata_byt }, { } /* terminate list */ }; @@ -441,6 +445,7 @@ static const struct piix_map_db *piix_map_db_table[] = { [tolapai_sata] = &tolapai_map_db, [ich8_sata_snb] = &ich8_map_db, [ich8_2port_sata_snb] = &ich8_2port_map_db, + [ich8_2port_sata_byt] = &ich8_2port_map_db, }; static struct pci_bits piix_enable_bits[] = { @@ -1254,6 +1259,16 @@ static struct ata_port_info piix_port_info[] = { .udma_mask = ATA_UDMA6, .port_ops = &piix_sata_ops, }, + + [ich8_2port_sata_byt] = + { + .flags = PIIX_SATA_FLAGS | PIIX_FLAG_SIDPR | PIIX_FLAG_PIO16, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, + .udma_mask = ATA_UDMA6, + .port_ops = &piix_sata_ops, + }, + }; #define AHCI_PCI_BAR 5 -- cgit v1.2.3-70-g09d2 From e771451c0a831d96a7c14b0ca8a8ec671d98567b Mon Sep 17 00:00:00 2001 From: Vincent Pelletier Date: Sat, 18 May 2013 18:44:04 +0200 Subject: libata: make ata_exec_internal_sg honor DMADIR MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit libata honors DMADIR for regular commands, but not for internal commands used (among other) during device initialisation. This makes SATA-host-to-PATA-device bridges based on Silicon Image SiL3611 (such as "Abit Serillel 2") end up disabled when used with an ATAPI device after a few tries. Log output of the bridge being hot-plugged with an ATAPI drive: [ 9631.212901] ata1: exception Emask 0x10 SAct 0x0 SErr 0x40c0000 action 0xe frozen [ 9631.212913] ata1: irq_stat 0x00000040, connection status changed [ 9631.212923] ata1: SError: { CommWake 10B8B DevExch } [ 9631.212939] ata1: hard resetting link [ 9632.104962] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 9632.106393] ata1.00: ATAPI: PIONEER DVD-RW DVR-115, 1.06, max UDMA/33 [ 9632.106407] ata1.00: applying bridge limits [ 9632.108151] ata1.00: configured for UDMA/33 [ 9637.105303] ata1.00: qc timeout (cmd 0xa0) [ 9637.105324] ata1.00: failed to clear UNIT ATTENTION (err_mask=0x5) [ 9637.105335] ata1: hard resetting link [ 9638.044599] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 9638.047878] ata1.00: configured for UDMA/33 [ 9643.044933] ata1.00: qc timeout (cmd 0xa0) [ 9643.044953] ata1.00: failed to clear UNIT ATTENTION (err_mask=0x5) [ 9643.044963] ata1: limiting SATA link speed to 1.5 Gbps [ 9643.044971] ata1.00: limiting speed to UDMA/33:PIO3 [ 9643.044979] ata1: hard resetting link [ 9643.984225] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 9643.987471] ata1.00: configured for UDMA/33 [ 9648.984591] ata1.00: qc timeout (cmd 0xa0) [ 9648.984612] ata1.00: failed to clear UNIT ATTENTION (err_mask=0x5) [ 9648.984619] ata1.00: disabled [ 9649.000593] ata1: hard resetting link [ 9649.939902] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 9649.955864] ata1: EH complete With this patch, the drive enumerates correctly when libata is loaded with atapi_dmadir=1: [ 9891.810863] ata1: exception Emask 0x10 SAct 0x0 SErr 0x40c0000 action 0xe frozen [ 9891.810874] ata1: irq_stat 0x00000040, connection status changed [ 9891.810884] ata1: SError: { CommWake 10B8B DevExch } [ 9891.810900] ata1: hard resetting link [ 9892.762105] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 9892.763544] ata1.00: ATAPI: PIONEER DVD-RW DVR-115, 1.06, max UDMA/33, DMADIR [ 9892.763558] ata1.00: applying bridge limits [ 9892.765393] ata1.00: configured for UDMA/33 [ 9892.786063] ata1: EH complete [ 9892.792062] scsi 0:0:0:0: CD-ROM PIONEER DVD-RW DVR-115 1.06 PQ: 0 ANSI: 5 [ 9892.798455] sr2: scsi3-mmc drive: 12x/12x writer dvd-ram cd/rw xa/form2 cdda tray [ 9892.798837] sr 0:0:0:0: Attached scsi CD-ROM sr2 [ 9892.799109] sr 0:0:0:0: Attached scsi generic sg6 type 5 Based on a patch by Csaba Halász on linux-ide: http://marc.info/?l=linux-ide&m=136121147832295&w=2 tj: minor formatting changes. Signed-off-by: Vincent Pelletier Signed-off-by: Tejun Heo Cc: stable@vger.kernel.org --- drivers/ata/libata-core.c | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'drivers/ata') diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index d35524c3390..f2184276539 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -1602,6 +1602,12 @@ unsigned ata_exec_internal_sg(struct ata_device *dev, qc->tf = *tf; if (cdb) memcpy(qc->cdb, cdb, ATAPI_CDB_LEN); + + /* some SATA bridges need us to indicate data xfer direction */ + if (tf->protocol == ATAPI_PROT_DMA && (dev->flags & ATA_DFLAG_DMADIR) && + dma_dir == DMA_FROM_DEVICE) + qc->tf.feature |= ATAPI_DMADIR; + qc->flags |= ATA_QCFLAG_RESULT_TF; qc->dma_dir = dma_dir; if (dma_dir != DMA_NONE) { -- cgit v1.2.3-70-g09d2 From df7e131f6359f20ed8f0a37db039c4f6420a18c2 Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Tue, 21 May 2013 23:07:54 +0400 Subject: sata_rcar: clear STOP bit in bmdma_start() method Iff bmdma_setup() has to stop a DMA transfer before starting a new one, then the STOP bit in the ATAPI_CONTROL1 register will remain set (it's only cleared when setting the START bit to 1) and then bmdma_start() method will set both START and STOP bits simultaneously which should abort the transfer being just started. Avoid that by explicitly clearing the STOP bit in bmdma_start() method (in this case it will be ignored on write). Signed-off-by: Sergei Shtylyov Signed-off-by: Tejun Heo Cc: stable@vger.kernel.org --- drivers/ata/sata_rcar.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/ata') diff --git a/drivers/ata/sata_rcar.c b/drivers/ata/sata_rcar.c index 4799868bd73..a8e091aafdd 100644 --- a/drivers/ata/sata_rcar.c +++ b/drivers/ata/sata_rcar.c @@ -549,6 +549,7 @@ static void sata_rcar_bmdma_start(struct ata_queued_cmd *qc) /* start host DMA transaction */ dmactl = ioread32(priv->base + ATAPI_CONTROL1_REG); + dmactl &= ~ATAPI_CONTROL1_STOP; dmactl |= ATAPI_CONTROL1_START; iowrite32(dmactl, priv->base + ATAPI_CONTROL1_REG); } -- cgit v1.2.3-70-g09d2 From fcce9a35f8faaa1f52236c554ef1b15d99a7537e Mon Sep 17 00:00:00 2001 From: George Spelvin Date: Wed, 29 May 2013 10:20:35 +0900 Subject: ahci: add an observed PCI ID for Marvell 88se9172 SATA controller A third possible PCI ID, as personally observed, and found in the pci.ids list. Signed-off-by: George Spelvin Signed-off-by: Tejun Heo --- drivers/ata/ahci.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers/ata') diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c index 21808766140..2b50dfdf1cf 100644 --- a/drivers/ata/ahci.c +++ b/drivers/ata/ahci.c @@ -423,6 +423,8 @@ static const struct pci_device_id ahci_pci_tbl[] = { .driver_data = board_ahci_yes_fbs }, /* 88se9125 */ { PCI_DEVICE(PCI_VENDOR_ID_MARVELL_EXT, 0x917a), .driver_data = board_ahci_yes_fbs }, /* 88se9172 */ + { PCI_DEVICE(PCI_VENDOR_ID_MARVELL_EXT, 0x9172), + .driver_data = board_ahci_yes_fbs }, /* 88se9172 */ { PCI_DEVICE(PCI_VENDOR_ID_MARVELL_EXT, 0x9192), .driver_data = board_ahci_yes_fbs }, /* 88se9172 on some Gigabyte */ { PCI_DEVICE(PCI_VENDOR_ID_MARVELL_EXT, 0x91a3), -- cgit v1.2.3-70-g09d2 From 52a2a1087b5924de00484f35ef5e2a73f61dbd22 Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Sat, 1 Jun 2013 02:38:35 +0400 Subject: sata_rcar: fix interrupt handling The driver's interrupt handling code is too picky in deciding whether it should handle an interrupt or not which causes completely unneeded spurious interrupts. Thus make sata_rcar_{ata|serr}_interrupt() *void*; add ATA status register read to sata_rcar_ata_interrupt() to clear an unexpected ATA interrupt -- it doesn't get cleared by writing to the SATAINTSTAT register in the interrupt mode we use. Also, in sata_rcar_ata_interrupt() we should check SATAINTSTAT register only for enabled interrupts and we should clear only those interrupts that we have read as active first time around, because else we have a race and risk clearing an interrupt that can occur between read and write of the SATAINTSTAT register and never registering it... Signed-off-by: Sergei Shtylyov Signed-off-by: Tejun Heo Cc: stable@vger.kernel.org --- drivers/ata/sata_rcar.c | 23 +++++++++++------------ 1 file changed, 11 insertions(+), 12 deletions(-) (limited to 'drivers/ata') diff --git a/drivers/ata/sata_rcar.c b/drivers/ata/sata_rcar.c index a8e091aafdd..249c8a289bf 100644 --- a/drivers/ata/sata_rcar.c +++ b/drivers/ata/sata_rcar.c @@ -619,17 +619,16 @@ static struct ata_port_operations sata_rcar_port_ops = { .bmdma_status = sata_rcar_bmdma_status, }; -static int sata_rcar_serr_interrupt(struct ata_port *ap) +static void sata_rcar_serr_interrupt(struct ata_port *ap) { struct sata_rcar_priv *priv = ap->host->private_data; struct ata_eh_info *ehi = &ap->link.eh_info; int freeze = 0; - int handled = 0; u32 serror; serror = ioread32(priv->base + SCRSERR_REG); if (!serror) - return 0; + return; DPRINTK("SError @host_intr: 0x%x\n", serror); @@ -642,7 +641,6 @@ static int sata_rcar_serr_interrupt(struct ata_port *ap) ata_ehi_push_desc(ehi, "%s", "hotplug"); freeze = serror & SERR_COMM_WAKE ? 0 : 1; - handled = 1; } /* freeze or abort */ @@ -650,11 +648,9 @@ static int sata_rcar_serr_interrupt(struct ata_port *ap) ata_port_freeze(ap); else ata_port_abort(ap); - - return handled; } -static int sata_rcar_ata_interrupt(struct ata_port *ap) +static void sata_rcar_ata_interrupt(struct ata_port *ap) { struct ata_queued_cmd *qc; int handled = 0; @@ -663,7 +659,9 @@ static int sata_rcar_ata_interrupt(struct ata_port *ap) if (qc) handled |= ata_bmdma_port_intr(ap, qc); - return handled; + /* be sure to clear ATA interrupt */ + if (!handled) + sata_rcar_check_status(ap); } static irqreturn_t sata_rcar_interrupt(int irq, void *dev_instance) @@ -678,20 +676,21 @@ static irqreturn_t sata_rcar_interrupt(int irq, void *dev_instance) spin_lock_irqsave(&host->lock, flags); sataintstat = ioread32(priv->base + SATAINTSTAT_REG); + sataintstat &= SATA_RCAR_INT_MASK; if (!sataintstat) goto done; /* ack */ - iowrite32(sataintstat & ~SATA_RCAR_INT_MASK, - priv->base + SATAINTSTAT_REG); + iowrite32(~sataintstat & 0x7ff, priv->base + SATAINTSTAT_REG); ap = host->ports[0]; if (sataintstat & SATAINTSTAT_ATA) - handled |= sata_rcar_ata_interrupt(ap); + sata_rcar_ata_interrupt(ap); if (sataintstat & SATAINTSTAT_SERR) - handled |= sata_rcar_serr_interrupt(ap); + sata_rcar_serr_interrupt(ap); + handled = 1; done: spin_unlock_irqrestore(&host->lock, flags); -- cgit v1.2.3-70-g09d2 From ddfef5de3d716f77bad32dbbba6b280158dfd721 Mon Sep 17 00:00:00 2001 From: Mark Langsdorf Date: Mon, 3 Jun 2013 08:22:54 -0500 Subject: sata_highbank: increase retry count but shorten duration for Calxeda controller Increase the retry count for the hard reset function to 100 but shorten the time out period to 500 ms. See the comment for ahci_highbank_hardreset for the reasons why those vaulues were chosen. Signed-off-by: Mark Langsdorf Signed-off-by: Tejun Heo Cc: stable@vger.kernel.org --- drivers/ata/sata_highbank.c | 20 ++++++++++++++++++-- 1 file changed, 18 insertions(+), 2 deletions(-) (limited to 'drivers/ata') diff --git a/drivers/ata/sata_highbank.c b/drivers/ata/sata_highbank.c index b20aa96b958..c846fd3c5c0 100644 --- a/drivers/ata/sata_highbank.c +++ b/drivers/ata/sata_highbank.c @@ -196,10 +196,26 @@ static int highbank_initialize_phys(struct device *dev, void __iomem *addr) return 0; } +/* + * The Calxeda SATA phy intermittently fails to bring up a link with Gen3 + * Retrying the phy hard reset can work around the issue, but the drive + * may fail again. In less than 150 out of 15000 test runs, it took more + * than 10 tries for the link to be established (but never more than 35). + * Triple the maximum observed retry count to provide plenty of margin for + * rare events and to guarantee that the link is established. + * + * Also, the default 2 second time-out on a failed drive is too long in + * this situation. The uboot implementation of the same driver function + * uses a much shorter time-out period and never experiences a time out + * issue. Reducing the time-out to 500ms improves the responsiveness. + * The other timing constants were kept the same as the stock AHCI driver. + * This change was also tested 15000 times on 24 drives and none of them + * experienced a time out. + */ static int ahci_highbank_hardreset(struct ata_link *link, unsigned int *class, unsigned long deadline) { - const unsigned long *timing = sata_ehc_deb_timing(&link->eh_context); + static const unsigned long timing[] = { 5, 100, 500}; struct ata_port *ap = link->ap; struct ahci_port_priv *pp = ap->private_data; u8 *d2h_fis = pp->rx_fis + RX_FIS_D2H_REG; @@ -207,7 +223,7 @@ static int ahci_highbank_hardreset(struct ata_link *link, unsigned int *class, bool online; u32 sstatus; int rc; - int retry = 10; + int retry = 100; ahci_stop_engine(ap); -- cgit v1.2.3-70-g09d2 From 5ba59b59cb413b9d89f40532bad3529d5185dd3c Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Mon, 3 Jun 2013 13:16:05 -0700 Subject: sata_rcar: fix compilation warning in sata_rcar_thaw() When compiling the driver with gcc 4.8, it gives the following warning: drivers/ata/sata_rcar.c: In function `sata_rcar_thaw': drivers/ata/sata_rcar.c:183:2: warning: large integer implicitly truncated to unsigned type [-Woverflow] Fix the warning by explicit cast of the 'unsigned long' value to 'u32'. Signed-off-by: Sergei Shtylyov Signed-off-by: Tejun Heo --- drivers/ata/sata_rcar.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/ata') diff --git a/drivers/ata/sata_rcar.c b/drivers/ata/sata_rcar.c index 249c8a289bf..d5142346347 100644 --- a/drivers/ata/sata_rcar.c +++ b/drivers/ata/sata_rcar.c @@ -180,7 +180,7 @@ static void sata_rcar_thaw(struct ata_port *ap) struct sata_rcar_priv *priv = ap->host->private_data; /* ack */ - iowrite32(~SATA_RCAR_INT_MASK, priv->base + SATAINTSTAT_REG); + iowrite32(~(u32)SATA_RCAR_INT_MASK, priv->base + SATAINTSTAT_REG); ata_sff_thaw(ap); -- cgit v1.2.3-70-g09d2 From 912b9ac683b112615d5605686f1dc086402ce9f7 Mon Sep 17 00:00:00 2001 From: Shane Huang Date: Sat, 8 Jun 2013 16:00:16 +0800 Subject: ahci: remove pmp link online check in FBS EH ata_link_online() check in ahci_error_intr() is unnecessary, it should be removed otherwise may lead to lockup with FBS enabled PMP. http://marc.info/?l=linux-ide&m=137050421603272&w=2 Reported-by: Yu Liu Signed-off-by: Shane Huang Signed-off-by: Tejun Heo Cc: stable@vger.kernel.org --- drivers/ata/libahci.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'drivers/ata') diff --git a/drivers/ata/libahci.c b/drivers/ata/libahci.c index a70ff154f58..7b9bdd822c6 100644 --- a/drivers/ata/libahci.c +++ b/drivers/ata/libahci.c @@ -1560,8 +1560,7 @@ static void ahci_error_intr(struct ata_port *ap, u32 irq_stat) u32 fbs = readl(port_mmio + PORT_FBS); int pmp = fbs >> PORT_FBS_DWE_OFFSET; - if ((fbs & PORT_FBS_SDE) && (pmp < ap->nr_pmp_links) && - ata_link_online(&ap->pmp_link[pmp])) { + if ((fbs & PORT_FBS_SDE) && (pmp < ap->nr_pmp_links)) { link = &ap->pmp_link[pmp]; fbs_need_dec = true; } -- cgit v1.2.3-70-g09d2 From 7a87718d92760fc688628ad6a430643dafa16f1f Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Tue, 11 Jun 2013 00:11:36 -0700 Subject: libata: skip SRST for all SIMG [34]7x port-multipliers For some reason, a lot of port-multipliers have issues with softreset. SIMG [34]7x series port-multipliers have been quite erratic in this regard. I recall that it was better with some firmware revisions and the current list of quirks worked fine for a while. I think it got worse with later firmwares or maybe my test coverage wasn't good enough. Anyways, HPA is reporting that his 3726 setup suffers SRST failures and then the PMP gets confused and fails to probe the last port. The hope was that we try to stick to the standard as much as possible and soonish the PMPs and their firmwares will improve in quality, so the quirk list was kept to minimum. Well, it seems like that's never gonna happen. Let's set NO_SRST for all [34]7x PMPs so that whatever remaining userbase of the device suffer the least. Maybe we should do the same for 57xx's but unfortunately I don't have any device left to test and I'm not even sure 57xx's have ever been made widely available, so let's leave those alone for now. Signed-off-by: Tejun Heo Reported-by: "H. Peter Anvin" Cc: stable@vger.kernel.org --- drivers/ata/libata-pmp.c | 33 +++++++++++++++++---------------- 1 file changed, 17 insertions(+), 16 deletions(-) (limited to 'drivers/ata') diff --git a/drivers/ata/libata-pmp.c b/drivers/ata/libata-pmp.c index 61c59ee45ce..1c41722bb7e 100644 --- a/drivers/ata/libata-pmp.c +++ b/drivers/ata/libata-pmp.c @@ -389,9 +389,13 @@ static void sata_pmp_quirks(struct ata_port *ap) /* link reports offline after LPM */ link->flags |= ATA_LFLAG_NO_LPM; - /* Class code report is unreliable. */ + /* + * Class code report is unreliable and SRST times + * out under certain configurations. + */ if (link->pmp < 5) - link->flags |= ATA_LFLAG_ASSUME_ATA; + link->flags |= ATA_LFLAG_NO_SRST | + ATA_LFLAG_ASSUME_ATA; /* port 5 is for SEMB device and it doesn't like SRST */ if (link->pmp == 5) @@ -399,20 +403,17 @@ static void sata_pmp_quirks(struct ata_port *ap) ATA_LFLAG_ASSUME_SEMB; } } else if (vendor == 0x1095 && devid == 0x4723) { - /* sil4723 quirks */ - ata_for_each_link(link, ap, EDGE) { - /* link reports offline after LPM */ - link->flags |= ATA_LFLAG_NO_LPM; - - /* class code report is unreliable */ - if (link->pmp < 2) - link->flags |= ATA_LFLAG_ASSUME_ATA; - - /* the config device at port 2 locks up on SRST */ - if (link->pmp == 2) - link->flags |= ATA_LFLAG_NO_SRST | - ATA_LFLAG_ASSUME_ATA; - } + /* + * sil4723 quirks + * + * Link reports offline after LPM. Class code report is + * unreliable. SIMG PMPs never got SRST reliable and the + * config device at port 2 locks up on SRST. + */ + ata_for_each_link(link, ap, EDGE) + link->flags |= ATA_LFLAG_NO_LPM | + ATA_LFLAG_NO_SRST | + ATA_LFLAG_ASSUME_ATA; } else if (vendor == 0x1095 && devid == 0x4726) { /* sil4726 quirks */ ata_for_each_link(link, ap, EDGE) { -- cgit v1.2.3-70-g09d2 From c7e8695bfa0611b39493a9dfe8bab9f63f9809bd Mon Sep 17 00:00:00 2001 From: Seth Heasley Date: Wed, 19 Jun 2013 16:25:37 -0700 Subject: ata_piix: IDE-mode SATA patch for Intel Coleto Creek DeviceIDs This patch adds the IDE-mode SATA DeviceIDs for the Intel Coleto Creek PCH. Signed-off-by: Seth Heasley Signed-off-by: Tejun Heo Cc: stable@vger.kernel.org --- drivers/ata/ata_piix.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers/ata') diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c index 9a8a674e8fa..8eae6590575 100644 --- a/drivers/ata/ata_piix.c +++ b/drivers/ata/ata_piix.c @@ -338,6 +338,8 @@ static const struct pci_device_id piix_pci_tbl[] = { /* SATA Controller IDE (BayTrail) */ { 0x8086, 0x0F20, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata_byt }, { 0x8086, 0x0F21, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata_byt }, + /* SATA Controller IDE (Coleto Creek) */ + { 0x8086, 0x23a6, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata }, { } /* terminate list */ }; -- cgit v1.2.3-70-g09d2 From 1cfc7df3de10c40ed459e13cce6de616023bf41c Mon Sep 17 00:00:00 2001 From: Seth Heasley Date: Wed, 19 Jun 2013 16:36:45 -0700 Subject: ahci: AHCI-mode SATA patch for Intel Coleto Creek DeviceIDs This patch adds the AHCI-mode SATA DeviceIDs for the Intel Coleto Creek PCH. Signed-off-by: Seth Heasley Signed-off-by: Tejun Heo Cc: stable@vger.kernel.org --- drivers/ata/ahci.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/ata') diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c index 2b50dfdf1cf..e381f36468f 100644 --- a/drivers/ata/ahci.c +++ b/drivers/ata/ahci.c @@ -291,6 +291,7 @@ static const struct pci_device_id ahci_pci_tbl[] = { { PCI_VDEVICE(INTEL, 0x8d64), board_ahci }, /* Wellsburg RAID */ { PCI_VDEVICE(INTEL, 0x8d66), board_ahci }, /* Wellsburg RAID */ { PCI_VDEVICE(INTEL, 0x8d6e), board_ahci }, /* Wellsburg RAID */ + { PCI_VDEVICE(INTEL, 0x23a3), board_ahci }, /* Coleto Creek AHCI */ /* JMicron 360/1/3/5/6, match class to avoid IDE function */ { PCI_VENDOR_ID_JMICRON, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, -- cgit v1.2.3-70-g09d2