From 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sat, 16 Apr 2005 15:20:36 -0700 Subject: Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! --- drivers/block/floppy.c | 4638 ++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 4638 insertions(+) create mode 100644 drivers/block/floppy.c (limited to 'drivers/block/floppy.c') diff --git a/drivers/block/floppy.c b/drivers/block/floppy.c new file mode 100644 index 00000000000..42dfa281a88 --- /dev/null +++ b/drivers/block/floppy.c @@ -0,0 +1,4638 @@ +/* + * linux/drivers/block/floppy.c + * + * Copyright (C) 1991, 1992 Linus Torvalds + * Copyright (C) 1993, 1994 Alain Knaff + * Copyright (C) 1998 Alan Cox + */ +/* + * 02.12.91 - Changed to static variables to indicate need for reset + * and recalibrate. This makes some things easier (output_byte reset + * checking etc), and means less interrupt jumping in case of errors, + * so the code is hopefully easier to understand. + */ + +/* + * This file is certainly a mess. I've tried my best to get it working, + * but I don't like programming floppies, and I have only one anyway. + * Urgel. I should check for more errors, and do more graceful error + * recovery. Seems there are problems with several drives. I've tried to + * correct them. No promises. + */ + +/* + * As with hd.c, all routines within this file can (and will) be called + * by interrupts, so extreme caution is needed. A hardware interrupt + * handler may not sleep, or a kernel panic will happen. Thus I cannot + * call "floppy-on" directly, but have to set a special timer interrupt + * etc. + */ + +/* + * 28.02.92 - made track-buffering routines, based on the routines written + * by entropy@wintermute.wpi.edu (Lawrence Foard). Linus. + */ + +/* + * Automatic floppy-detection and formatting written by Werner Almesberger + * (almesber@nessie.cs.id.ethz.ch), who also corrected some problems with + * the floppy-change signal detection. + */ + +/* + * 1992/7/22 -- Hennus Bergman: Added better error reporting, fixed + * FDC data overrun bug, added some preliminary stuff for vertical + * recording support. + * + * 1992/9/17: Added DMA allocation & DMA functions. -- hhb. + * + * TODO: Errors are still not counted properly. + */ + +/* 1992/9/20 + * Modifications for ``Sector Shifting'' by Rob Hooft (hooft@chem.ruu.nl) + * modeled after the freeware MS-DOS program fdformat/88 V1.8 by + * Christoph H. Hochst\"atter. + * I have fixed the shift values to the ones I always use. Maybe a new + * ioctl() should be created to be able to modify them. + * There is a bug in the driver that makes it impossible to format a + * floppy as the first thing after bootup. + */ + +/* + * 1993/4/29 -- Linus -- cleaned up the timer handling in the kernel, and + * this helped the floppy driver as well. Much cleaner, and still seems to + * work. + */ + +/* 1994/6/24 --bbroad-- added the floppy table entries and made + * minor modifications to allow 2.88 floppies to be run. + */ + +/* 1994/7/13 -- Paul Vojta -- modified the probing code to allow three or more + * disk types. + */ + +/* + * 1994/8/8 -- Alain Knaff -- Switched to fdpatch driver: Support for bigger + * format bug fixes, but unfortunately some new bugs too... + */ + +/* 1994/9/17 -- Koen Holtman -- added logging of physical floppy write + * errors to allow safe writing by specialized programs. + */ + +/* 1995/4/24 -- Dan Fandrich -- added support for Commodore 1581 3.5" disks + * by defining bit 1 of the "stretch" parameter to mean put sectors on the + * opposite side of the disk, leaving the sector IDs alone (i.e. Commodore's + * drives are "upside-down"). + */ + +/* + * 1995/8/26 -- Andreas Busse -- added Mips support. + */ + +/* + * 1995/10/18 -- Ralf Baechle -- Portability cleanup; move machine dependent + * features to asm/floppy.h. + */ + +/* + * 1998/05/07 -- Russell King -- More portability cleanups; moved definition of + * interrupt and dma channel to asm/floppy.h. Cleaned up some formatting & + * use of '0' for NULL. + */ + +/* + * 1998/06/07 -- Alan Cox -- Merged the 2.0.34 fixes for resource allocation + * failures. + */ + +/* + * 1998/09/20 -- David Weinehall -- Added slow-down code for buggy PS/2-drives. + */ + +/* + * 1999/08/13 -- Paul Slootman -- floppy stopped working on Alpha after 24 + * days, 6 hours, 32 minutes and 32 seconds (i.e. MAXINT jiffies; ints were + * being used to store jiffies, which are unsigned longs). + */ + +/* + * 2000/08/28 -- Arnaldo Carvalho de Melo + * - get rid of check_region + * - s/suser/capable/ + */ + +/* + * 2001/08/26 -- Paul Gortmaker - fix insmod oops on machines with no + * floppy controller (lingering task on list after module is gone... boom.) + */ + +/* + * 2002/02/07 -- Anton Altaparmakov - Fix io ports reservation to correct range + * (0x3f2-0x3f5, 0x3f7). This fix is a bit of a hack but the proper fix + * requires many non-obvious changes in arch dependent code. + */ + +/* 2003/07/28 -- Daniele Bellucci . + * Better audit of register_blkdev. + */ + +#define FLOPPY_SANITY_CHECK +#undef FLOPPY_SILENT_DCL_CLEAR + +#define REALLY_SLOW_IO + +#define DEBUGT 2 +#define DCL_DEBUG /* debug disk change line */ + +/* do print messages for unexpected interrupts */ +static int print_unex = 1; +#include +#include +#include +#include +#include +#include +#define FDPATCHES +#include + +/* + * 1998/1/21 -- Richard Gooch -- devfs support + */ + +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include /* CMOS defines */ +#include +#include +#include +#include +#include +#include /* for invalidate_buffers() */ + +/* + * PS/2 floppies have much slower step rates than regular floppies. + * It's been recommended that take about 1/4 of the default speed + * in some more extreme cases. + */ +static int slow_floppy; + +#include +#include +#include +#include +#include + +static int FLOPPY_IRQ = 6; +static int FLOPPY_DMA = 2; +static int can_use_virtual_dma = 2; +/* ======= + * can use virtual DMA: + * 0 = use of virtual DMA disallowed by config + * 1 = use of virtual DMA prescribed by config + * 2 = no virtual DMA preference configured. By default try hard DMA, + * but fall back on virtual DMA when not enough memory available + */ + +static int use_virtual_dma; +/* ======= + * use virtual DMA + * 0 using hard DMA + * 1 using virtual DMA + * This variable is set to virtual when a DMA mem problem arises, and + * reset back in floppy_grab_irq_and_dma. + * It is not safe to reset it in other circumstances, because the floppy + * driver may have several buffers in use at once, and we do currently not + * record each buffers capabilities + */ + +static DEFINE_SPINLOCK(floppy_lock); +static struct completion device_release; + +static unsigned short virtual_dma_port = 0x3f0; +irqreturn_t floppy_interrupt(int irq, void *dev_id, struct pt_regs *regs); +static int set_dor(int fdc, char mask, char data); +static void register_devfs_entries(int drive) __init; + +#define K_64 0x10000 /* 64KB */ + +/* the following is the mask of allowed drives. By default units 2 and + * 3 of both floppy controllers are disabled, because switching on the + * motor of these drives causes system hangs on some PCI computers. drive + * 0 is the low bit (0x1), and drive 7 is the high bit (0x80). Bits are on if + * a drive is allowed. + * + * NOTE: This must come before we include the arch floppy header because + * some ports reference this variable from there. -DaveM + */ + +static int allowed_drive_mask = 0x33; + +#include + +static int irqdma_allocated; + +#define LOCAL_END_REQUEST +#define DEVICE_NAME "floppy" + +#include +#include +#include /* for the compatibility eject ioctl */ +#include + +static struct request *current_req; +static struct request_queue *floppy_queue; +static void do_fd_request(request_queue_t * q); + +#ifndef fd_get_dma_residue +#define fd_get_dma_residue() get_dma_residue(FLOPPY_DMA) +#endif + +/* Dma Memory related stuff */ + +#ifndef fd_dma_mem_free +#define fd_dma_mem_free(addr, size) free_pages(addr, get_order(size)) +#endif + +#ifndef fd_dma_mem_alloc +#define fd_dma_mem_alloc(size) __get_dma_pages(GFP_KERNEL,get_order(size)) +#endif + +static inline void fallback_on_nodma_alloc(char **addr, size_t l) +{ +#ifdef FLOPPY_CAN_FALLBACK_ON_NODMA + if (*addr) + return; /* we have the memory */ + if (can_use_virtual_dma != 2) + return; /* no fallback allowed */ + printk + ("DMA memory shortage. Temporarily falling back on virtual DMA\n"); + *addr = (char *)nodma_mem_alloc(l); +#else + return; +#endif +} + +/* End dma memory related stuff */ + +static unsigned long fake_change; +static int initialising = 1; + +#define ITYPE(x) (((x)>>2) & 0x1f) +#define TOMINOR(x) ((x & 3) | ((x & 4) << 5)) +#define UNIT(x) ((x) & 0x03) /* drive on fdc */ +#define FDC(x) (((x) & 0x04) >> 2) /* fdc of drive */ +#define REVDRIVE(fdc, unit) ((unit) + ((fdc) << 2)) + /* reverse mapping from unit and fdc to drive */ +#define DP (&drive_params[current_drive]) +#define DRS (&drive_state[current_drive]) +#define DRWE (&write_errors[current_drive]) +#define FDCS (&fdc_state[fdc]) +#define CLEARF(x) (clear_bit(x##_BIT, &DRS->flags)) +#define SETF(x) (set_bit(x##_BIT, &DRS->flags)) +#define TESTF(x) (test_bit(x##_BIT, &DRS->flags)) + +#define UDP (&drive_params[drive]) +#define UDRS (&drive_state[drive]) +#define UDRWE (&write_errors[drive]) +#define UFDCS (&fdc_state[FDC(drive)]) +#define UCLEARF(x) (clear_bit(x##_BIT, &UDRS->flags)) +#define USETF(x) (set_bit(x##_BIT, &UDRS->flags)) +#define UTESTF(x) (test_bit(x##_BIT, &UDRS->flags)) + +#define DPRINT(format, args...) printk(DEVICE_NAME "%d: " format, current_drive , ## args) + +#define PH_HEAD(floppy,head) (((((floppy)->stretch & 2) >>1) ^ head) << 2) +#define STRETCH(floppy) ((floppy)->stretch & FD_STRETCH) + +#define CLEARSTRUCT(x) memset((x), 0, sizeof(*(x))) + +/* read/write */ +#define COMMAND raw_cmd->cmd[0] +#define DR_SELECT raw_cmd->cmd[1] +#define TRACK raw_cmd->cmd[2] +#define HEAD raw_cmd->cmd[3] +#define SECTOR raw_cmd->cmd[4] +#define SIZECODE raw_cmd->cmd[5] +#define SECT_PER_TRACK raw_cmd->cmd[6] +#define GAP raw_cmd->cmd[7] +#define SIZECODE2 raw_cmd->cmd[8] +#define NR_RW 9 + +/* format */ +#define F_SIZECODE raw_cmd->cmd[2] +#define F_SECT_PER_TRACK raw_cmd->cmd[3] +#define F_GAP raw_cmd->cmd[4] +#define F_FILL raw_cmd->cmd[5] +#define NR_F 6 + +/* + * Maximum disk size (in kilobytes). This default is used whenever the + * current disk size is unknown. + * [Now it is rather a minimum] + */ +#define MAX_DISK_SIZE 4 /* 3984 */ + +/* + * globals used by 'result()' + */ +#define MAX_REPLIES 16 +static unsigned char reply_buffer[MAX_REPLIES]; +static int inr; /* size of reply buffer, when called from interrupt */ +#define ST0 (reply_buffer[0]) +#define ST1 (reply_buffer[1]) +#define ST2 (reply_buffer[2]) +#define ST3 (reply_buffer[0]) /* result of GETSTATUS */ +#define R_TRACK (reply_buffer[3]) +#define R_HEAD (reply_buffer[4]) +#define R_SECTOR (reply_buffer[5]) +#define R_SIZECODE (reply_buffer[6]) + +#define SEL_DLY (2*HZ/100) + +/* + * this struct defines the different floppy drive types. + */ +static struct { + struct floppy_drive_params params; + const char *name; /* name printed while booting */ +} default_drive_params[] = { +/* NOTE: the time values in jiffies should be in msec! + CMOS drive type + | Maximum data rate supported by drive type + | | Head load time, msec + | | | Head unload time, msec (not used) + | | | | Step rate interval, usec + | | | | | Time needed for spinup time (jiffies) + | | | | | | Timeout for spinning down (jiffies) + | | | | | | | Spindown offset (where disk stops) + | | | | | | | | Select delay + | | | | | | | | | RPS + | | | | | | | | | | Max number of tracks + | | | | | | | | | | | Interrupt timeout + | | | | | | | | | | | | Max nonintlv. sectors + | | | | | | | | | | | | | -Max Errors- flags */ +{{0, 500, 16, 16, 8000, 1*HZ, 3*HZ, 0, SEL_DLY, 5, 80, 3*HZ, 20, {3,1,2,0,2}, 0, + 0, { 7, 4, 8, 2, 1, 5, 3,10}, 3*HZ/2, 0 }, "unknown" }, + +{{1, 300, 16, 16, 8000, 1*HZ, 3*HZ, 0, SEL_DLY, 5, 40, 3*HZ, 17, {3,1,2,0,2}, 0, + 0, { 1, 0, 0, 0, 0, 0, 0, 0}, 3*HZ/2, 1 }, "360K PC" }, /*5 1/4 360 KB PC*/ + +{{2, 500, 16, 16, 6000, 4*HZ/10, 3*HZ, 14, SEL_DLY, 6, 83, 3*HZ, 17, {3,1,2,0,2}, 0, + 0, { 2, 5, 6,23,10,20,12, 0}, 3*HZ/2, 2 }, "1.2M" }, /*5 1/4 HD AT*/ + +{{3, 250, 16, 16, 3000, 1*HZ, 3*HZ, 0, SEL_DLY, 5, 83, 3*HZ, 20, {3,1,2,0,2}, 0, + 0, { 4,22,21,30, 3, 0, 0, 0}, 3*HZ/2, 4 }, "720k" }, /*3 1/2 DD*/ + +{{4, 500, 16, 16, 4000, 4*HZ/10, 3*HZ, 10, SEL_DLY, 5, 83, 3*HZ, 20, {3,1,2,0,2}, 0, + 0, { 7, 4,25,22,31,21,29,11}, 3*HZ/2, 7 }, "1.44M" }, /*3 1/2 HD*/ + +{{5, 1000, 15, 8, 3000, 4*HZ/10, 3*HZ, 10, SEL_DLY, 5, 83, 3*HZ, 40, {3,1,2,0,2}, 0, + 0, { 7, 8, 4,25,28,22,31,21}, 3*HZ/2, 8 }, "2.88M AMI BIOS" }, /*3 1/2 ED*/ + +{{6, 1000, 15, 8, 3000, 4*HZ/10, 3*HZ, 10, SEL_DLY, 5, 83, 3*HZ, 40, {3,1,2,0,2}, 0, + 0, { 7, 8, 4,25,28,22,31,21}, 3*HZ/2, 8 }, "2.88M" } /*3 1/2 ED*/ +/* | --autodetected formats--- | | | + * read_track | | Name printed when booting + * | Native format + * Frequency of disk change checks */ +}; + +static struct floppy_drive_params drive_params[N_DRIVE]; +static struct floppy_drive_struct drive_state[N_DRIVE]; +static struct floppy_write_errors write_errors[N_DRIVE]; +static struct timer_list motor_off_timer[N_DRIVE]; +static struct gendisk *disks[N_DRIVE]; +static struct block_device *opened_bdev[N_DRIVE]; +static DECLARE_MUTEX(open_lock); +static struct floppy_raw_cmd *raw_cmd, default_raw_cmd; + +/* + * This struct defines the different floppy types. + * + * Bit 0 of 'stretch' tells if the tracks need to be doubled for some + * types (e.g. 360kB diskette in 1.2MB drive, etc.). Bit 1 of 'stretch' + * tells if the disk is in Commodore 1581 format, which means side 0 sectors + * are located on side 1 of the disk but with a side 0 ID, and vice-versa. + * This is the same as the Sharp MZ-80 5.25" CP/M disk format, except that the + * 1581's logical side 0 is on physical side 1, whereas the Sharp's logical + * side 0 is on physical side 0 (but with the misnamed sector IDs). + * 'stretch' should probably be renamed to something more general, like + * 'options'. Other parameters should be self-explanatory (see also + * setfdprm(8)). + */ +/* + Size + | Sectors per track + | | Head + | | | Tracks + | | | | Stretch + | | | | | Gap 1 size + | | | | | | Data rate, | 0x40 for perp + | | | | | | | Spec1 (stepping rate, head unload + | | | | | | | | /fmt gap (gap2) */ +static struct floppy_struct floppy_type[32] = { + { 0, 0,0, 0,0,0x00,0x00,0x00,0x00,NULL }, /* 0 no testing */ + { 720, 9,2,40,0,0x2A,0x02,0xDF,0x50,"d360" }, /* 1 360KB PC */ + { 2400,15,2,80,0,0x1B,0x00,0xDF,0x54,"h1200" }, /* 2 1.2MB AT */ + { 720, 9,1,80,0,0x2A,0x02,0xDF,0x50,"D360" }, /* 3 360KB SS 3.5" */ + { 1440, 9,2,80,0,0x2A,0x02,0xDF,0x50,"D720" }, /* 4 720KB 3.5" */ + { 720, 9,2,40,1,0x23,0x01,0xDF,0x50,"h360" }, /* 5 360KB AT */ + { 1440, 9,2,80,0,0x23,0x01,0xDF,0x50,"h720" }, /* 6 720KB AT */ + { 2880,18,2,80,0,0x1B,0x00,0xCF,0x6C,"H1440" }, /* 7 1.44MB 3.5" */ + { 5760,36,2,80,0,0x1B,0x43,0xAF,0x54,"E2880" }, /* 8 2.88MB 3.5" */ + { 6240,39,2,80,0,0x1B,0x43,0xAF,0x28,"E3120" }, /* 9 3.12MB 3.5" */ + + { 2880,18,2,80,0,0x25,0x00,0xDF,0x02,"h1440" }, /* 10 1.44MB 5.25" */ + { 3360,21,2,80,0,0x1C,0x00,0xCF,0x0C,"H1680" }, /* 11 1.68MB 3.5" */ + { 820,10,2,41,1,0x25,0x01,0xDF,0x2E,"h410" }, /* 12 410KB 5.25" */ + { 1640,10,2,82,0,0x25,0x02,0xDF,0x2E,"H820" }, /* 13 820KB 3.5" */ + { 2952,18,2,82,0,0x25,0x00,0xDF,0x02,"h1476" }, /* 14 1.48MB 5.25" */ + { 3444,21,2,82,0,0x25,0x00,0xDF,0x0C,"H1722" }, /* 15 1.72MB 3.5" */ + { 840,10,2,42,1,0x25,0x01,0xDF,0x2E,"h420" }, /* 16 420KB 5.25" */ + { 1660,10,2,83,0,0x25,0x02,0xDF,0x2E,"H830" }, /* 17 830KB 3.5" */ + { 2988,18,2,83,0,0x25,0x00,0xDF,0x02,"h1494" }, /* 18 1.49MB 5.25" */ + { 3486,21,2,83,0,0x25,0x00,0xDF,0x0C,"H1743" }, /* 19 1.74 MB 3.5" */ + + { 1760,11,2,80,0,0x1C,0x09,0xCF,0x00,"h880" }, /* 20 880KB 5.25" */ + { 2080,13,2,80,0,0x1C,0x01,0xCF,0x00,"D1040" }, /* 21 1.04MB 3.5" */ + { 2240,14,2,80,0,0x1C,0x19,0xCF,0x00,"D1120" }, /* 22 1.12MB 3.5" */ + { 3200,20,2,80,0,0x1C,0x20,0xCF,0x2C,"h1600" }, /* 23 1.6MB 5.25" */ + { 3520,22,2,80,0,0x1C,0x08,0xCF,0x2e,"H1760" }, /* 24 1.76MB 3.5" */ + { 3840,24,2,80,0,0x1C,0x20,0xCF,0x00,"H1920" }, /* 25 1.92MB 3.5" */ + { 6400,40,2,80,0,0x25,0x5B,0xCF,0x00,"E3200" }, /* 26 3.20MB 3.5" */ + { 7040,44,2,80,0,0x25,0x5B,0xCF,0x00,"E3520" }, /* 27 3.52MB 3.5" */ + { 7680,48,2,80,0,0x25,0x63,0xCF,0x00,"E3840" }, /* 28 3.84MB 3.5" */ + + { 3680,23,2,80,0,0x1C,0x10,0xCF,0x00,"H1840" }, /* 29 1.84MB 3.5" */ + { 1600,10,2,80,0,0x25,0x02,0xDF,0x2E,"D800" }, /* 30 800KB 3.5" */ + { 3200,20,2,80,0,0x1C,0x00,0xCF,0x2C,"H1600" }, /* 31 1.6MB 3.5" */ +}; + +#define NUMBER(x) (sizeof(x) / sizeof(*(x))) +#define SECTSIZE (_FD_SECTSIZE(*floppy)) + +/* Auto-detection: Disk type used until the next media change occurs. */ +static struct floppy_struct *current_type[N_DRIVE]; + +/* + * User-provided type information. current_type points to + * the respective entry of this array. + */ +static struct floppy_struct user_params[N_DRIVE]; + +static sector_t floppy_sizes[256]; + +/* + * The driver is trying to determine the correct media format + * while probing is set. rw_interrupt() clears it after a + * successful access. + */ +static int probing; + +/* Synchronization of FDC access. */ +#define FD_COMMAND_NONE -1 +#define FD_COMMAND_ERROR 2 +#define FD_COMMAND_OKAY 3 + +static volatile int command_status = FD_COMMAND_NONE; +static unsigned long fdc_busy; +static DECLARE_WAIT_QUEUE_HEAD(fdc_wait); +static DECLARE_WAIT_QUEUE_HEAD(command_done); + +#define NO_SIGNAL (!interruptible || !signal_pending(current)) +#define CALL(x) if ((x) == -EINTR) return -EINTR +#define ECALL(x) if ((ret = (x))) return ret; +#define _WAIT(x,i) CALL(ret=wait_til_done((x),i)) +#define WAIT(x) _WAIT((x),interruptible) +#define IWAIT(x) _WAIT((x),1) + +/* Errors during formatting are counted here. */ +static int format_errors; + +/* Format request descriptor. */ +static struct format_descr format_req; + +/* + * Rate is 0 for 500kb/s, 1 for 300kbps, 2 for 250kbps + * Spec1 is 0xSH, where S is stepping rate (F=1ms, E=2ms, D=3ms etc), + * H is head unload time (1=16ms, 2=32ms, etc) + */ + +/* + * Track buffer + * Because these are written to by the DMA controller, they must + * not contain a 64k byte boundary crossing, or data will be + * corrupted/lost. + */ +static char *floppy_track_buffer; +static int max_buffer_sectors; + +static int *errors; +typedef void (*done_f) (int); +static struct cont_t { + void (*interrupt) (void); /* this is called after the interrupt of the + * main command */ + void (*redo) (void); /* this is called to retry the operation */ + void (*error) (void); /* this is called to tally an error */ + done_f done; /* this is called to say if the operation has + * succeeded/failed */ +} *cont; + +static void floppy_ready(void); +static void floppy_start(void); +static void process_fd_request(void); +static void recalibrate_floppy(void); +static void floppy_shutdown(unsigned long); + +static int floppy_grab_irq_and_dma(void); +static void floppy_release_irq_and_dma(void); + +/* + * The "reset" variable should be tested whenever an interrupt is scheduled, + * after the commands have been sent. This is to ensure that the driver doesn't + * get wedged when the interrupt doesn't come because of a failed command. + * reset doesn't need to be tested before sending commands, because + * output_byte is automatically disabled when reset is set. + */ +#define CHECK_RESET { if (FDCS->reset){ reset_fdc(); return; } } +static void reset_fdc(void); + +/* + * These are global variables, as that's the easiest way to give + * information to interrupts. They are the data used for the current + * request. + */ +#define NO_TRACK -1 +#define NEED_1_RECAL -2 +#define NEED_2_RECAL -3 + +static int usage_count; + +/* buffer related variables */ +static int buffer_track = -1; +static int buffer_drive = -1; +static int buffer_min = -1; +static int buffer_max = -1; + +/* fdc related variables, should end up in a struct */ +static struct floppy_fdc_state fdc_state[N_FDC]; +static int fdc; /* current fdc */ + +static struct floppy_struct *_floppy = floppy_type; +static unsigned char current_drive; +static long current_count_sectors; +static unsigned char fsector_t; /* sector in track */ +static unsigned char in_sector_offset; /* offset within physical sector, + * expressed in units of 512 bytes */ + +#ifndef fd_eject +static inline int fd_eject(int drive) +{ + return -EINVAL; +} +#endif + +/* + * Debugging + * ========= + */ +#ifdef DEBUGT +static long unsigned debugtimer; + +static inline void set_debugt(void) +{ + debugtimer = jiffies; +} + +static inline void debugt(const char *message) +{ + if (DP->flags & DEBUGT) + printk("%s dtime=%lu\n", message, jiffies - debugtimer); +} +#else +static inline void set_debugt(void) { } +static inline void debugt(const char *message) { } +#endif /* DEBUGT */ + +typedef void (*timeout_fn) (unsigned long); +static struct timer_list fd_timeout = TIMER_INITIALIZER(floppy_shutdown, 0, 0); + +static const char *timeout_message; + +#ifdef FLOPPY_SANITY_CHECK +static void is_alive(const char *message) +{ + /* this routine checks whether the floppy driver is "alive" */ + if (test_bit(0, &fdc_busy) && command_status < 2 + && !timer_pending(&fd_timeout)) { + DPRINT("timeout handler died: %s\n", message); + } +} +#endif + +static void (*do_floppy) (void) = NULL; + +#ifdef FLOPPY_SANITY_CHECK + +#define OLOGSIZE 20 + +static void (*lasthandler) (void); +static unsigned long interruptjiffies; +static unsigned long resultjiffies; +static int resultsize; +static unsigned long lastredo; + +static struct output_log { + unsigned char data; + unsigned char status; + unsigned long jiffies; +} output_log[OLOGSIZE]; + +static int output_log_pos; +#endif + +#define current_reqD -1 +#define MAXTIMEOUT -2 + +static void __reschedule_timeout(int drive, const char *message, int marg) +{ + if (drive == current_reqD) + drive = current_drive; + del_timer(&fd_timeout); + if (drive < 0 || drive > N_DRIVE) { + fd_timeout.expires = jiffies + 20UL * HZ; + drive = 0; + } else + fd_timeout.expires = jiffies + UDP->timeout; + add_timer(&fd_timeout); + if (UDP->flags & FD_DEBUG) { + DPRINT("reschedule timeout "); + printk(message, marg); + printk("\n"); + } + timeout_message = message; +} + +static void reschedule_timeout(int drive, const char *message, int marg) +{ + unsigned long flags; + + spin_lock_irqsave(&floppy_lock, flags); + __reschedule_timeout(drive, message, marg); + spin_unlock_irqrestore(&floppy_lock, flags); +} + +#define INFBOUND(a,b) (a)=max_t(int, a, b) + +#define SUPBOUND(a,b) (a)=min_t(int, a, b) + +/* + * Bottom half floppy driver. + * ========================== + * + * This part of the file contains the code talking directly to the hardware, + * and also the main service loop (seek-configure-spinup-command) + */ + +/* + * disk change. + * This routine is responsible for maintaining the FD_DISK_CHANGE flag, + * and the last_checked date. + * + * last_checked is the date of the last check which showed 'no disk change' + * FD_DISK_CHANGE is set under two conditions: + * 1. The floppy has been changed after some i/o to that floppy already + * took place. + * 2. No floppy disk is in the drive. This is done in order to ensure that + * requests are quickly flushed in case there is no disk in the drive. It + * follows that FD_DISK_CHANGE can only be cleared if there is a disk in + * the drive. + * + * For 1., maxblock is observed. Maxblock is 0 if no i/o has taken place yet. + * For 2., FD_DISK_NEWCHANGE is watched. FD_DISK_NEWCHANGE is cleared on + * each seek. If a disk is present, the disk change line should also be + * cleared on each seek. Thus, if FD_DISK_NEWCHANGE is clear, but the disk + * change line is set, this means either that no disk is in the drive, or + * that it has been removed since the last seek. + * + * This means that we really have a third possibility too: + * The floppy has been changed after the last seek. + */ + +static int disk_change(int drive) +{ + int fdc = FDC(drive); +#ifdef FLOPPY_SANITY_CHECK + if (jiffies - UDRS->select_date < UDP->select_delay) + DPRINT("WARNING disk change called early\n"); + if (!(FDCS->dor & (0x10 << UNIT(drive))) || + (FDCS->dor & 3) != UNIT(drive) || fdc != FDC(drive)) { + DPRINT("probing disk change on unselected drive\n"); + DPRINT("drive=%d fdc=%d dor=%x\n", drive, FDC(drive), + (unsigned int)FDCS->dor); + } +#endif + +#ifdef DCL_DEBUG + if (UDP->flags & FD_DEBUG) { + DPRINT("checking disk change line for drive %d\n", drive); + DPRINT("jiffies=%lu\n", jiffies); + DPRINT("disk change line=%x\n", fd_inb(FD_DIR) & 0x80); + DPRINT("flags=%lx\n", UDRS->flags); + } +#endif + if (UDP->flags & FD_BROKEN_DCL) + return UTESTF(FD_DISK_CHANGED); + if ((fd_inb(FD_DIR) ^ UDP->flags) & 0x80) { + USETF(FD_VERIFY); /* verify write protection */ + if (UDRS->maxblock) { + /* mark it changed */ + USETF(FD_DISK_CHANGED); + } + + /* invalidate its geometry */ + if (UDRS->keep_data >= 0) { + if ((UDP->flags & FTD_MSG) && + current_type[drive] != NULL) + DPRINT("Disk type is undefined after " + "disk change\n"); + current_type[drive] = NULL; + floppy_sizes[TOMINOR(drive)] = MAX_DISK_SIZE << 1; + } + + /*USETF(FD_DISK_NEWCHANGE); */ + return 1; + } else { + UDRS->last_checked = jiffies; + UCLEARF(FD_DISK_NEWCHANGE); + } + return 0; +} + +static inline int is_selected(int dor, int unit) +{ + return ((dor & (0x10 << unit)) && (dor & 3) == unit); +} + +static int set_dor(int fdc, char mask, char data) +{ + register unsigned char drive, unit, newdor, olddor; + + if (FDCS->address == -1) + return -1; + + olddor = FDCS->dor; + newdor = (olddor & mask) | data; + if (newdor != olddor) { + unit = olddor & 0x3; + if (is_selected(olddor, unit) && !is_selected(newdor, unit)) { + drive = REVDRIVE(fdc, unit); +#ifdef DCL_DEBUG + if (UDP->flags & FD_DEBUG) { + DPRINT("calling disk change from set_dor\n"); + } +#endif + disk_change(drive); + } + FDCS->dor = newdor; + fd_outb(newdor, FD_DOR); + + unit = newdor & 0x3; + if (!is_selected(olddor, unit) && is_selected(newdor, unit)) { + drive = REVDRIVE(fdc, unit); + UDRS->select_date = jiffies; + } + } + /* + * We should propagate failures to grab the resources back + * nicely from here. Actually we ought to rewrite the fd + * driver some day too. + */ + if (newdor & FLOPPY_MOTOR_MASK) + floppy_grab_irq_and_dma(); + if (olddor & FLOPPY_MOTOR_MASK) + floppy_release_irq_and_dma(); + return olddor; +} + +static void twaddle(void) +{ + if (DP->select_delay) + return; + fd_outb(FDCS->dor & ~(0x10 << UNIT(current_drive)), FD_DOR); + fd_outb(FDCS->dor, FD_DOR); + DRS->select_date = jiffies; +} + +/* reset all driver information about the current fdc. This is needed after + * a reset, and after a raw command. */ +static void reset_fdc_info(int mode) +{ + int drive; + + FDCS->spec1 = FDCS->spec2 = -1; + FDCS->need_configure = 1; + FDCS->perp_mode = 1; + FDCS->rawcmd = 0; + for (drive = 0; drive < N_DRIVE; drive++) + if (FDC(drive) == fdc && (mode || UDRS->track != NEED_1_RECAL)) + UDRS->track = NEED_2_RECAL; +} + +/* selects the fdc and drive, and enables the fdc's input/dma. */ +static void set_fdc(int drive) +{ + if (drive >= 0 && drive < N_DRIVE) { + fdc = FDC(drive); + current_drive = drive; + } + if (fdc != 1 && fdc != 0) { + printk("bad fdc value\n"); + return; + } + set_dor(fdc, ~0, 8); +#if N_FDC > 1 + set_dor(1 - fdc, ~8, 0); +#endif + if (FDCS->rawcmd == 2) + reset_fdc_info(1); + if (fd_inb(FD_STATUS) != STATUS_READY) + FDCS->reset = 1; +} + +/* locks the driver */ +static int _lock_fdc(int drive, int interruptible, int line) +{ + if (!usage_count) { + printk(KERN_ERR + "Trying to lock fdc while usage count=0 at line %d\n", + line); + return -1; + } + if (floppy_grab_irq_and_dma() == -1) + return -EBUSY; + + if (test_and_set_bit(0, &fdc_busy)) { + DECLARE_WAITQUEUE(wait, current); + add_wait_queue(&fdc_wait, &wait); + + for (;;) { + set_current_state(TASK_INTERRUPTIBLE); + + if (!test_and_set_bit(0, &fdc_busy)) + break; + + schedule(); + + if (!NO_SIGNAL) { + remove_wait_queue(&fdc_wait, &wait); + return -EINTR; + } + } + + set_current_state(TASK_RUNNING); + remove_wait_queue(&fdc_wait, &wait); + } + command_status = FD_COMMAND_NONE; + + __reschedule_timeout(drive, "lock fdc", 0); + set_fdc(drive); + return 0; +} + +#define lock_fdc(drive,interruptible) _lock_fdc(drive,interruptible, __LINE__) + +#define LOCK_FDC(drive,interruptible) \ +if (lock_fdc(drive,interruptible)) return -EINTR; + +/* unlocks the driver */ +static inline void unlock_fdc(void) +{ + unsigned long flags; + + raw_cmd = NULL; + if (!test_bit(0, &fdc_busy)) + DPRINT("FDC access conflict!\n"); + + if (do_floppy) + DPRINT("device interrupt still active at FDC release: %p!\n", + do_floppy); + command_status = FD_COMMAND_NONE; + spin_lock_irqsave(&floppy_lock, flags); + del_timer(&fd_timeout); + cont = NULL; + clear_bit(0, &fdc_busy); + if (elv_next_request(floppy_queue)) + do_fd_request(floppy_queue); + spin_unlock_irqrestore(&floppy_lock, flags); + floppy_release_irq_and_dma(); + wake_up(&fdc_wait); +} + +/* switches the motor off after a given timeout */ +static void motor_off_callback(unsigned long nr) +{ + unsigned char mask = ~(0x10 << UNIT(nr)); + + set_dor(FDC(nr), mask, 0); +} + +/* schedules motor off */ +static void floppy_off(unsigned int drive) +{ + unsigned long volatile delta; + register int fdc = FDC(drive); + + if (!(FDCS->dor & (0x10 << UNIT(drive)))) + return; + + del_timer(motor_off_timer + drive); + + /* make spindle stop in a position which minimizes spinup time + * next time */ + if (UDP->rps) { + delta = jiffies - UDRS->first_read_date + HZ - + UDP->spindown_offset; + delta = ((delta * UDP->rps) % HZ) / UDP->rps; + motor_off_timer[drive].expires = + jiffies + UDP->spindown - delta; + } + add_timer(motor_off_timer + drive); +} + +/* + * cycle through all N_DRIVE floppy drives, for disk change testing. + * stopping at current drive. This is done before any long operation, to + * be sure to have up to date disk change information. + */ +static void scandrives(void) +{ + int i, drive, saved_drive; + + if (DP->select_delay) + return; + + saved_drive = current_drive; + for (i = 0; i < N_DRIVE; i++) { + drive = (saved_drive + i + 1) % N_DRIVE; + if (UDRS->fd_ref == 0 || UDP->select_delay != 0) + continue; /* skip closed drives */ + set_fdc(drive); + if (!(set_dor(fdc, ~3, UNIT(drive) | (0x10 << UNIT(drive))) & + (0x10 << UNIT(drive)))) + /* switch the motor off again, if it was off to + * begin with */ + set_dor(fdc, ~(0x10 << UNIT(drive)), 0); + } + set_fdc(saved_drive); +} + +static void empty(void) +{ +} + +static DECLARE_WORK(floppy_work, NULL, NULL); + +static void schedule_bh(void (*handler) (void)) +{ + PREPARE_WORK(&floppy_work, (void (*)(void *))handler, NULL); + schedule_work(&floppy_work); +} + +static struct timer_list fd_timer = TIMER_INITIALIZER(NULL, 0, 0); + +static void cancel_activity(void) +{ + unsigned long flags; + + spin_lock_irqsave(&floppy_lock, flags); + do_floppy = NULL; + PREPARE_WORK(&floppy_work, (void *)empty, NULL); + del_timer(&fd_timer); + spin_unlock_irqrestore(&floppy_lock, flags); +} + +/* this function makes sure that the disk stays in the drive during the + * transfer */ +static void fd_watchdog(void) +{ +#ifdef DCL_DEBUG + if (DP->flags & FD_DEBUG) { + DPRINT("calling disk change from watchdog\n"); + } +#endif + + if (disk_change(current_drive)) { + DPRINT("disk removed during i/o\n"); + cancel_activity(); + cont->done(0); + reset_fdc(); + } else { + del_timer(&fd_timer); + fd_timer.function = (timeout_fn) fd_watchdog; + fd_timer.expires = jiffies + HZ / 10; + add_timer(&fd_timer); + } +} + +static void main_command_interrupt(void) +{ + del_timer(&fd_timer); + cont->interrupt(); +} + +/* waits for a delay (spinup or select) to pass */ +static int fd_wait_for_completion(unsigned long delay, timeout_fn function) +{ + if (FDCS->reset) { + reset_fdc(); /* do the reset during sleep to win time + * if we don't need to sleep, it's a good + * occasion anyways */ + return 1; + } + + if ((signed)(jiffies - delay) < 0) { + del_timer(&fd_timer); + fd_timer.function = function; + fd_timer.expires = delay; + add_timer(&fd_timer); + return 1; + } + return 0; +} + +static DEFINE_SPINLOCK(floppy_hlt_lock); +static int hlt_disabled; +static void floppy_disable_hlt(void) +{ + unsigned long flags; + + spin_lock_irqsave(&floppy_hlt_lock, flags); + if (!hlt_disabled) { + hlt_disabled = 1; +#ifdef HAVE_DISABLE_HLT + disable_hlt(); +#endif + } + spin_unlock_irqrestore(&floppy_hlt_lock, flags); +} + +static void floppy_enable_hlt(void) +{ + unsigned long flags; + + spin_lock_irqsave(&floppy_hlt_lock, flags); + if (hlt_disabled) { + hlt_disabled = 0; +#ifdef HAVE_DISABLE_HLT + enable_hlt(); +#endif + } + spin_unlock_irqrestore(&floppy_hlt_lock, flags); +} + +static void setup_DMA(void) +{ + unsigned long f; + +#ifdef FLOPPY_SANITY_CHECK + if (raw_cmd->length == 0) { + int i; + + printk("zero dma transfer size:"); + for (i = 0; i < raw_cmd->cmd_count; i++) + printk("%x,", raw_cmd->cmd[i]); + printk("\n"); + cont->done(0); + FDCS->reset = 1; + return; + } + if (((unsigned long)raw_cmd->kernel_data) % 512) { + printk("non aligned address: %p\n", raw_cmd->kernel_data); + cont->done(0); + FDCS->reset = 1; + return; + } +#endif + f = claim_dma_lock(); + fd_disable_dma(); +#ifdef fd_dma_setup + if (fd_dma_setup(raw_cmd->kernel_data, raw_cmd->length, + (raw_cmd->flags & FD_RAW_READ) ? + DMA_MODE_READ : DMA_MODE_WRITE, FDCS->address) < 0) { + release_dma_lock(f); + cont->done(0); + FDCS->reset = 1; + return; + } + release_dma_lock(f); +#else + fd_clear_dma_ff(); + fd_cacheflush(raw_cmd->kernel_data, raw_cmd->length); + fd_set_dma_mode((raw_cmd->flags & FD_RAW_READ) ? + DMA_MODE_READ : DMA_MODE_WRITE); + fd_set_dma_addr(raw_cmd->kernel_data); + fd_set_dma_count(raw_cmd->length); + virtual_dma_port = FDCS->address; + fd_enable_dma(); + release_dma_lock(f); +#endif + floppy_disable_hlt(); +} + +static void show_floppy(void); + +/* waits until the fdc becomes ready */ +static int wait_til_ready(void) +{ + int counter, status; + if (FDCS->reset) + return -1; + for (counter = 0; counter < 10000; counter++) { + status = fd_inb(FD_STATUS); + if (status & STATUS_READY) + return status; + } + if (!initialising) { + DPRINT("Getstatus times out (%x) on fdc %d\n", status, fdc); + show_floppy(); + } + FDCS->reset = 1; + return -1; +} + +/* sends a command byte to the fdc */ +static int output_byte(char byte) +{ + int status; + + if ((status = wait_til_ready()) < 0) + return -1; + if ((status & (STATUS_READY | STATUS_DIR | STATUS_DMA)) == STATUS_READY) { + fd_outb(byte, FD_DATA); +#ifdef FLOPPY_SANITY_CHECK + output_log[output_log_pos].data = byte; + output_log[output_log_pos].status = status; + output_log[output_log_pos].jiffies = jiffies; + output_log_pos = (output_log_pos + 1) % OLOGSIZE; +#endif + return 0; + } + FDCS->reset = 1; + if (!initialising) { + DPRINT("Unable to send byte %x to FDC. Fdc=%x Status=%x\n", + byte, fdc, status); + show_floppy(); + } + return -1; +} + +#define LAST_OUT(x) if (output_byte(x)<0){ reset_fdc();return;} + +/* gets the response from the fdc */ +static int result(void) +{ + int i, status = 0; + + for (i = 0; i < MAX_REPLIES; i++) { + if ((status = wait_til_ready()) < 0) + break; + status &= STATUS_DIR | STATUS_READY | STATUS_BUSY | STATUS_DMA; + if ((status & ~STATUS_BUSY) == STATUS_READY) { +#ifdef FLOPPY_SANITY_CHECK + resultjiffies = jiffies; + resultsize = i; +#endif + return i; + } + if (status == (STATUS_DIR | STATUS_READY | STATUS_BUSY)) + reply_buffer[i] = fd_inb(FD_DATA); + else + break; + } + if (!initialising) { + DPRINT + ("get result error. Fdc=%d Last status=%x Read bytes=%d\n", + fdc, status, i); + show_floppy(); + } + FDCS->reset = 1; + return -1; +} + +#define MORE_OUTPUT -2 +/* does the fdc need more output? */ +static int need_more_output(void) +{ + int status; + if ((status = wait_til_ready()) < 0) + return -1; + if ((status & (STATUS_READY | STATUS_DIR | STATUS_DMA)) == STATUS_READY) + return MORE_OUTPUT; + return result(); +} + +/* Set perpendicular mode as required, based on data rate, if supported. + * 82077 Now tested. 1Mbps data rate only possible with 82077-1. + */ +static inline void perpendicular_mode(void) +{ + unsigned char perp_mode; + + if (raw_cmd->rate & 0x40) { + switch (raw_cmd->rate & 3) { + case 0: + perp_mode = 2; + break; + case 3: + perp_mode = 3; + break; + default: + DPRINT("Invalid data rate for perpendicular mode!\n"); + cont->done(0); + FDCS->reset = 1; /* convenient way to return to + * redo without to much hassle (deep + * stack et al. */ + return; + } + } else + perp_mode = 0; + + if (FDCS->perp_mode == perp_mode) + return; + if (FDCS->version >= FDC_82077_ORIG) { + output_byte(FD_PERPENDICULAR); + output_byte(perp_mode); + FDCS->perp_mode = perp_mode; + } else if (perp_mode) { + DPRINT("perpendicular mode not supported by this FDC.\n"); + } +} /* perpendicular_mode */ + +static int fifo_depth = 0xa; +static int no_fifo; + +static int fdc_configure(void) +{ + /* Turn on FIFO */ + output_byte(FD_CONFIGURE); + if (need_more_output() != MORE_OUTPUT) + return 0; + output_byte(0); + output_byte(0x10 | (no_fifo & 0x20) | (fifo_depth & 0xf)); + output_byte(0); /* pre-compensation from track + 0 upwards */ + return 1; +} + +#define NOMINAL_DTR 500 + +/* Issue a "SPECIFY" command to set the step rate time, head unload time, + * head load time, and DMA disable flag to values needed by floppy. + * + * The value "dtr" is the data transfer rate in Kbps. It is needed + * to account for the data rate-based scaling done by the 82072 and 82077 + * FDC types. This parameter is ignored for other types of FDCs (i.e. + * 8272a). + * + * Note that changing the data transfer rate has a (probably deleterious) + * effect on the parameters subject to scaling for 82072/82077 FDCs, so + * fdc_specify is called again after each data transfer rate + * change. + * + * srt: 1000 to 16000 in microseconds + * hut: 16 to 240 milliseconds + * hlt: 2 to 254 milliseconds + * + * These values are rounded up to the next highest available delay time. + */ +static void fdc_specify(void) +{ + unsigned char spec1, spec2; + unsigned long srt, hlt, hut; + unsigned long dtr = NOMINAL_DTR; + unsigned long scale_dtr = NOMINAL_DTR; + int hlt_max_code = 0x7f; + int hut_max_code = 0xf; + + if (FDCS->need_configure && FDCS->version >= FDC_82072A) { + fdc_configure(); + FDCS->need_configure = 0; + /*DPRINT("FIFO enabled\n"); */ + } + + switch (raw_cmd->rate & 0x03) { + case 3: + dtr = 1000; + break; + case 1: + dtr = 300; + if (FDCS->version >= FDC_82078) { + /* chose the default rate table, not the one + * where 1 = 2 Mbps */ + output_byte(FD_DRIVESPEC); + if (need_more_output() == MORE_OUTPUT) { + output_byte(UNIT(current_drive)); + output_byte(0xc0); + } + } + break; + case 2: + dtr = 250; + break; + } + + if (FDCS->version >= FDC_82072) { + scale_dtr = dtr; + hlt_max_code = 0x00; /* 0==256msec*dtr0/dtr (not linear!) */ + hut_max_code = 0x0; /* 0==256msec*dtr0/dtr (not linear!) */ + } + + /* Convert step rate from microseconds to milliseconds and 4 bits */ + srt = 16 - (DP->srt * scale_dtr / 1000 + NOMINAL_DTR - 1) / NOMINAL_DTR; + if (slow_floppy) { + srt = srt / 4; + } + SUPBOUND(srt, 0xf); + INFBOUND(srt, 0); + + hlt = (DP->hlt * scale_dtr / 2 + NOMINAL_DTR - 1) / NOMINAL_DTR; + if (hlt < 0x01) + hlt = 0x01; + else if (hlt > 0x7f) + hlt = hlt_max_code; + + hut = (DP->hut * scale_dtr / 16 + NOMINAL_DTR - 1) / NOMINAL_DTR; + if (hut < 0x1) + hut = 0x1; + else if (hut > 0xf) + hut = hut_max_code; + + spec1 = (srt << 4) | hut; + spec2 = (hlt << 1) | (use_virtual_dma & 1); + + /* If these parameters did not change, just return with success */ + if (FDCS->spec1 != spec1 || FDCS->spec2 != spec2) { + /* Go ahead and set spec1 and spec2 */ + output_byte(FD_SPECIFY); + output_byte(FDCS->spec1 = spec1); + output_byte(FDCS->spec2 = spec2); + } +} /* fdc_specify */ + +/* Set the FDC's data transfer rate on behalf of the specified drive. + * NOTE: with 82072/82077 FDCs, changing the data rate requires a reissue + * of the specify command (i.e. using the fdc_specify function). + */ +static int fdc_dtr(void) +{ + /* If data rate not already set to desired value, set it. */ + if ((raw_cmd->rate & 3) == FDCS->dtr) + return 0; + + /* Set dtr */ + fd_outb(raw_cmd->rate & 3, FD_DCR); + + /* TODO: some FDC/drive combinations (C&T 82C711 with TEAC 1.2MB) + * need a stabilization period of several milliseconds to be + * enforced after data rate changes before R/W operations. + * Pause 5 msec to avoid trouble. (Needs to be 2 jiffies) + */ + FDCS->dtr = raw_cmd->rate & 3; + return (fd_wait_for_completion(jiffies + 2UL * HZ / 100, + (timeout_fn) floppy_ready)); +} /* fdc_dtr */ + +static void tell_sector(void) +{ + printk(": track %d, head %d, sector %d, size %d", + R_TRACK, R_HEAD, R_SECTOR, R_SIZECODE); +} /* tell_sector */ + +/* + * OK, this error interpreting routine is called after a + * DMA read/write has succeeded + * or failed, so we check the results, and copy any buffers. + * hhb: Added better error reporting. + * ak: Made this into a separate routine. + */ +static int interpret_errors(void) +{ + char bad; + + if (inr != 7) { + DPRINT("-- FDC reply error"); + FDCS->reset = 1; + return 1; + } + + /* check IC to find cause of interrupt */ + switch (ST0 & ST0_INTR) { + case 0x40: /* error occurred during command execution */ + if (ST1 & ST1_EOC) + return 0; /* occurs with pseudo-DMA */ + bad = 1; + if (ST1 & ST1_WP) { + DPRINT("Drive is write protected\n"); + CLEARF(FD_DISK_WRITABLE); + cont->done(0); + bad = 2; + } else if (ST1 & ST1_ND) { + SETF(FD_NEED_TWADDLE); + } else if (ST1 & ST1_OR) { + if (DP->flags & FTD_MSG) + DPRINT("Over/Underrun - retrying\n"); + bad = 0; + } else if (*errors >= DP->max_errors.reporting) { + DPRINT(""); + if (ST0 & ST0_ECE) { + printk("Recalibrate failed!"); + } else if (ST2 & ST2_CRC) { + printk("data CRC error"); + tell_sector(); + } else if (ST1 & ST1_CRC) { + printk("CRC error"); + tell_sector(); + } else if ((ST1 & (ST1_MAM | ST1_ND)) + || (ST2 & ST2_MAM)) { + if (!probing) { + printk("sector not found"); + tell_sector(); + } else + printk("probe failed..."); + } else if (ST2 & ST2_WC) { /* seek error */ + printk("wrong cylinder"); + } else if (ST2 & ST2_BC) { /* cylinder marked as bad */ + printk("bad cylinder"); + } else { + printk + ("unknown error. ST[0..2] are: 0x%x 0x%x 0x%x", + ST0, ST1, ST2); + tell_sector(); + } + printk("\n"); + + } + if (ST2 & ST2_WC || ST2 & ST2_BC) + /* wrong cylinder => recal */ + DRS->track = NEED_2_RECAL; + return bad; + case 0x80: /* invalid command given */ + DPRINT("Invalid FDC command given!\n"); + cont->done(0); + return 2; + case 0xc0: + DPRINT("Abnormal termination caused by polling\n"); + cont->error(); + return 2; + default: /* (0) Normal command termination */ + return 0; + } +} + +/* + * This routine is called when everything should be correctly set up + * for the transfer (i.e. floppy motor is on, the correct floppy is + * selected, and the head is sitting on the right track). + */ +static void setup_rw_floppy(void) +{ + int i, r, flags, dflags; + unsigned long ready_date; + timeout_fn function; + + flags = raw_cmd->flags; + if (flags & (FD_RAW_READ | FD_RAW_WRITE)) + flags |= FD_RAW_INTR; + + if ((flags & FD_RAW_SPIN) && !(flags & FD_RAW_NO_MOTOR)) { + ready_date = DRS->spinup_date + DP->spinup; + /* If spinup will take a long time, rerun scandrives + * again just before spinup completion. Beware that + * after scandrives, we must again wait for selection. + */ + if ((signed)(ready_date - jiffies) > DP->select_delay) { + ready_date -= DP->select_delay; + function = (timeout_fn) floppy_start; + } else + function = (timeout_fn) setup_rw_floppy; + + /* wait until the floppy is spinning fast enough */ + if (fd_wait_for_completion(ready_date, function)) + return; + } + dflags = DRS->flags; + + if ((flags & FD_RAW_READ) || (flags & FD_RAW_WRITE)) + setup_DMA(); + + if (flags & FD_RAW_INTR) + do_floppy = main_command_interrupt; + + r = 0; + for (i = 0; i < raw_cmd->cmd_count; i++) + r |= output_byte(raw_cmd->cmd[i]); + + debugt("rw_command: "); + + if (r) { + cont->error(); + reset_fdc(); + return; + } + + if (!(flags & FD_RAW_INTR)) { + inr = result(); + cont->interrupt(); + } else if (flags & FD_RAW_NEED_DISK) + fd_watchdog(); +} + +static int blind_seek; + +/* + * This is the routine called after every seek (or recalibrate) interrupt + * from the floppy controller. + */ +static void seek_interrupt(void) +{ + debugt("seek interrupt:"); + if (inr != 2 || (ST0 & 0xF8) != 0x20) { + DPRINT("seek failed\n"); + DRS->track = NEED_2_RECAL; + cont->error(); + cont->redo(); + return; + } + if (DRS->track >= 0 && DRS->track != ST1 && !blind_seek) { +#ifdef DCL_DEBUG + if (DP->flags & FD_DEBUG) { + DPRINT + ("clearing NEWCHANGE flag because of effective seek\n"); + DPRINT("jiffies=%lu\n", jiffies); + } +#endif + CLEARF(FD_DISK_NEWCHANGE); /* effective seek */ + DRS->select_date = jiffies; + } + DRS->track = ST1; + floppy_ready(); +} + +static void check_wp(void) +{ + if (TESTF(FD_VERIFY)) { + /* check write protection */ + output_byte(FD_GETSTATUS); + output_byte(UNIT(current_drive)); + if (result() != 1) { + FDCS->reset = 1; + return; + } + CLEARF(FD_VERIFY); + CLEARF(FD_NEED_TWADDLE); +#ifdef DCL_DEBUG + if (DP->flags & FD_DEBUG) { + DPRINT("checking whether disk is write protected\n"); + DPRINT("wp=%x\n", ST3 & 0x40); + } +#endif + if (!(ST3 & 0x40)) + SETF(FD_DISK_WRITABLE); + else + CLEARF(FD_DISK_WRITABLE); + } +} + +static void seek_floppy(void) +{ + int track; + + blind_seek = 0; + +#ifdef DCL_DEBUG + if (DP->flags & FD_DEBUG) { + DPRINT("calling disk change from seek\n"); + } +#endif + + if (!TESTF(FD_DISK_NEWCHANGE) && + disk_change(current_drive) && (raw_cmd->flags & FD_RAW_NEED_DISK)) { + /* the media changed flag should be cleared after the seek. + * If it isn't, this means that there is really no disk in + * the drive. + */ + SETF(FD_DISK_CHANGED); + cont->done(0); + cont->redo(); + return; + } + if (DRS->track <= NEED_1_RECAL) { + recalibrate_floppy(); + return; + } else if (TESTF(FD_DISK_NEWCHANGE) && + (raw_cmd->flags & FD_RAW_NEED_DISK) && + (DRS->track <= NO_TRACK || DRS->track == raw_cmd->track)) { + /* we seek to clear the media-changed condition. Does anybody + * know a more elegant way, which works on all drives? */ + if (raw_cmd->track) + track = raw_cmd->track - 1; + else { + if (DP->flags & FD_SILENT_DCL_CLEAR) { + set_dor(fdc, ~(0x10 << UNIT(current_drive)), 0); + blind_seek = 1; + raw_cmd->flags |= FD_RAW_NEED_SEEK; + } + track = 1; + } + } else { + check_wp(); + if (raw_cmd->track != DRS->track && + (raw_cmd->flags & FD_RAW_NEED_SEEK)) + track = raw_cmd->track; + else { + setup_rw_floppy(); + return; + } + } + + do_floppy = seek_interrupt; + output_byte(FD_SEEK); + output_byte(UNIT(current_drive)); + LAST_OUT(track); + debugt("seek command:"); +} + +static void recal_interrupt(void) +{ + debugt("recal interrupt:"); + if (inr != 2) + FDCS->reset = 1; + else if (ST0 & ST0_ECE) { + switch (DRS->track) { + case NEED_1_RECAL: + debugt("recal interrupt need 1 recal:"); + /* after a second recalibrate, we still haven't + * reached track 0. Probably no drive. Raise an + * error, as failing immediately might upset + * computers possessed by the Devil :-) */ + cont->error(); + cont->redo(); + return; + case NEED_2_RECAL: + debugt("recal interrupt need 2 recal:"); + /* If we already did a recalibrate, + * and we are not at track 0, this + * means we have moved. (The only way + * not to move at recalibration is to + * be already at track 0.) Clear the + * new change flag */ +#ifdef DCL_DEBUG + if (DP->flags & FD_DEBUG) { + DPRINT + ("clearing NEWCHANGE flag because of second recalibrate\n"); + } +#endif + + CLEARF(FD_DISK_NEWCHANGE); + DRS->select_date = jiffies; + /* fall through */ + default: + debugt("recal interrupt default:"); + /* Recalibrate moves the head by at + * most 80 steps. If after one + * recalibrate we don't have reached + * track 0, this might mean that we + * started beyond track 80. Try + * again. */ + DRS->track = NEED_1_RECAL; + break; + } + } else + DRS->track = ST1; + floppy_ready(); +} + +static void print_result(char *message, int inr) +{ + int i; + + DPRINT("%s ", message); + if (inr >= 0) + for (i = 0; i < inr; i++) + printk("repl[%d]=%x ", i, reply_buffer[i]); + printk("\n"); +} + +/* interrupt handler. Note that this can be called externally on the Sparc */ +irqreturn_t floppy_interrupt(int irq, void *dev_id, struct pt_regs *regs) +{ + void (*handler) (void) = do_floppy; + int do_print; + unsigned long f; + + lasthandler = handler; + interruptjiffies = jiffies; + + f = claim_dma_lock(); + fd_disable_dma(); + release_dma_lock(f); + + floppy_enable_hlt(); + do_floppy = NULL; + if (fdc >= N_FDC || FDCS->address == -1) { + /* we don't even know which FDC is the culprit */ + printk("DOR0=%x\n", fdc_state[0].dor); + printk("floppy interrupt on bizarre fdc %d\n", fdc); + printk("handler=%p\n", handler); + is_alive("bizarre fdc"); + return IRQ_NONE; + } + + FDCS->reset = 0; + /* We have to clear the reset flag here, because apparently on boxes + * with level triggered interrupts (PS/2, Sparc, ...), it is needed to + * emit SENSEI's to clear the interrupt line. And FDCS->reset blocks the + * emission of the SENSEI's. + * It is OK to emit floppy commands because we are in an interrupt + * handler here, and thus we have to fear no interference of other + * activity. + */ + + do_print = !handler && print_unex && !initialising; + + inr = result(); + if (do_print) + print_result("unexpected interrupt", inr); + if (inr == 0) { + int max_sensei = 4; + do { + output_byte(FD_SENSEI); + inr = result(); + if (do_print) + print_result("sensei", inr); + max_sensei--; + } while ((ST0 & 0x83) != UNIT(current_drive) && inr == 2 + && max_sensei); + } + if (!handler) { + FDCS->reset = 1; + return IRQ_NONE; + } + schedule_bh(handler); + is_alive("normal interrupt end"); + + /* FIXME! Was it really for us? */ + return IRQ_HANDLED; +} + +static void recalibrate_floppy(void) +{ + debugt("recalibrate floppy:"); + do_floppy = recal_interrupt; + output_byte(FD_RECALIBRATE); + LAST_OUT(UNIT(current_drive)); +} + +/* + * Must do 4 FD_SENSEIs after reset because of ``drive polling''. + */ +static void reset_interrupt(void) +{ + debugt("reset interrupt:"); + result(); /* get the status ready for set_fdc */ + if (FDCS->reset) { + printk("reset set in interrupt, calling %p\n", cont->error); + cont->error(); /* a reset just after a reset. BAD! */ + } + cont->redo(); +} + +/* + * reset is done by pulling bit 2 of DOR low for a while (old FDCs), + * or by setting the self clearing bit 7 of STATUS (newer FDCs) + */ +static void reset_fdc(void) +{ + unsigned long flags; + + do_floppy = reset_interrupt; + FDCS->reset = 0; + reset_fdc_info(0); + + /* Pseudo-DMA may intercept 'reset finished' interrupt. */ + /* Irrelevant for systems with true DMA (i386). */ + + flags = claim_dma_lock(); + fd_disable_dma(); + release_dma_lock(flags); + + if (FDCS->version >= FDC_82072A) + fd_outb(0x80 | (FDCS->dtr & 3), FD_STATUS); + else { + fd_outb(FDCS->dor & ~0x04, FD_DOR); + udelay(FD_RESET_DELAY); + fd_outb(FDCS->dor, FD_DOR); + } +} + +static void show_floppy(void) +{ + int i; + + printk("\n"); + printk("floppy driver state\n"); + printk("-------------------\n"); + printk("now=%lu last interrupt=%lu diff=%lu last called handler=%p\n", + jiffies, interruptjiffies, jiffies - interruptjiffies, + lasthandler); + +#ifdef FLOPPY_SANITY_CHECK + printk("timeout_message=%s\n", timeout_message); + printk("last output bytes:\n"); + for (i = 0; i < OLOGSIZE; i++) + printk("%2x %2x %lu\n", + output_log[(i + output_log_pos) % OLOGSIZE].data, + output_log[(i + output_log_pos) % OLOGSIZE].status, + output_log[(i + output_log_pos) % OLOGSIZE].jiffies); + printk("last result at %lu\n", resultjiffies); + printk("last redo_fd_request at %lu\n", lastredo); + for (i = 0; i < resultsize; i++) { + printk("%2x ", reply_buffer[i]); + } + printk("\n"); +#endif + + printk("status=%x\n", fd_inb(FD_STATUS)); + printk("fdc_busy=%lu\n", fdc_busy); + if (do_floppy) + printk("do_floppy=%p\n", do_floppy); + if (floppy_work.pending) + printk("floppy_work.func=%p\n", floppy_work.func); + if (timer_pending(&fd_timer)) + printk("fd_timer.function=%p\n", fd_timer.function); + if (timer_pending(&fd_timeout)) { + printk("timer_function=%p\n", fd_timeout.function); + printk("expires=%lu\n", fd_timeout.expires - jiffies); + printk("now=%lu\n", jiffies); + } + printk("cont=%p\n", cont); + printk("current_req=%p\n", current_req); + printk("command_status=%d\n", command_status); + printk("\n"); +} + +static void floppy_shutdown(unsigned long data) +{ + unsigned long flags; + + if (!initialising) + show_floppy(); + cancel_activity(); + + floppy_enable_hlt(); + + flags = claim_dma_lock(); + fd_disable_dma(); + release_dma_lock(flags); + + /* avoid dma going to a random drive after shutdown */ + + if (!initialising) + DPRINT("floppy timeout called\n"); + FDCS->reset = 1; + if (cont) { + cont->done(0); + cont->redo(); /* this will recall reset when needed */ + } else { + printk("no cont in shutdown!\n"); + process_fd_request(); + } + is_alive("floppy shutdown"); +} + +/*typedef void (*timeout_fn)(unsigned long);*/ + +/* start motor, check media-changed condition and write protection */ +static int start_motor(void (*function) (void)) +{ + int mask, data; + + mask = 0xfc; + data = UNIT(current_drive); + if (!(raw_cmd->flags & FD_RAW_NO_MOTOR)) { + if (!(FDCS->dor & (0x10 << UNIT(current_drive)))) { + set_debugt(); + /* no read since this drive is running */ + DRS->first_read_date = 0; + /* note motor start time if motor is not yet running */ + DRS->spinup_date = jiffies; + data |= (0x10 << UNIT(current_drive)); + } + } else if (FDCS->dor & (0x10 << UNIT(current_drive))) + mask &= ~(0x10 << UNIT(current_drive)); + + /* starts motor and selects floppy */ + del_timer(motor_off_timer + current_drive); + set_dor(fdc, mask, data); + + /* wait_for_completion also schedules reset if needed. */ + return (fd_wait_for_completion(DRS->select_date + DP->select_delay, + (timeout_fn) function)); +} + +static void floppy_ready(void) +{ + CHECK_RESET; + if (start_motor(floppy_ready)) + return; + if (fdc_dtr()) + return; + +#ifdef DCL_DEBUG + if (DP->flags & FD_DEBUG) { + DPRINT("calling disk change from floppy_ready\n"); + } +#endif + if (!(raw_cmd->flags & FD_RAW_NO_MOTOR) && + disk_change(current_drive) && !DP->select_delay) + twaddle(); /* this clears the dcl on certain drive/controller + * combinations */ + +#ifdef fd_chose_dma_mode + if ((raw_cmd->flags & FD_RAW_READ) || (raw_cmd->flags & FD_RAW_WRITE)) { + unsigned long flags = claim_dma_lock(); + fd_chose_dma_mode(raw_cmd->kernel_data, raw_cmd->length); + release_dma_lock(flags); + } +#endif + + if (raw_cmd->flags & (FD_RAW_NEED_SEEK | FD_RAW_NEED_DISK)) { + perpendicular_mode(); + fdc_specify(); /* must be done here because of hut, hlt ... */ + seek_floppy(); + } else { + if ((raw_cmd->flags & FD_RAW_READ) || + (raw_cmd->flags & FD_RAW_WRITE)) + fdc_specify(); + setup_rw_floppy(); + } +} + +static void floppy_start(void) +{ + reschedule_timeout(current_reqD, "floppy start", 0); + + scandrives(); +#ifdef DCL_DEBUG + if (DP->flags & FD_DEBUG) { + DPRINT("setting NEWCHANGE in floppy_start\n"); + } +#endif + SETF(FD_DISK_NEWCHANGE); + floppy_ready(); +} + +/* + * ======================================================================== + * here ends the bottom half. Exported routines are: + * floppy_start, floppy_off, floppy_ready, lock_fdc, unlock_fdc, set_fdc, + * start_motor, reset_fdc, reset_fdc_info, interpret_errors. + * Initialization also uses output_byte, result, set_dor, floppy_interrupt + * and set_dor. + * ======================================================================== + */ +/* + * General purpose continuations. + * ============================== + */ + +static void do_wakeup(void) +{ + reschedule_timeout(MAXTIMEOUT, "do wakeup", 0); + cont = NULL; + command_status += 2; + wake_up(&command_done); +} + +static struct cont_t wakeup_cont = { + .interrupt = empty, + .redo = do_wakeup, + .error = empty, + .done = (done_f) empty +}; + +static struct cont_t intr_cont = { + .interrupt = empty, + .redo = process_fd_request, + .error = empty, + .done = (done_f) empty +}; + +static int wait_til_done(void (*handler) (void), int interruptible) +{ + int ret; + + schedule_bh(handler); + + if (command_status < 2 && NO_SIGNAL) { + DECLARE_WAITQUEUE(wait, current); + + add_wait_queue(&command_done, &wait); + for (;;) { + set_current_state(interruptible ? + TASK_INTERRUPTIBLE : + TASK_UNINTERRUPTIBLE); + + if (command_status >= 2 || !NO_SIGNAL) + break; + + is_alive("wait_til_done"); + + schedule(); + } + + set_current_state(TASK_RUNNING); + remove_wait_queue(&command_done, &wait); + } + + if (command_status < 2) { + cancel_activity(); + cont = &intr_cont; + reset_fdc(); + return -EINTR; + } + + if (FDCS->reset) + command_status = FD_COMMAND_ERROR; + if (command_status == FD_COMMAND_OKAY) + ret = 0; + else + ret = -EIO; + command_status = FD_COMMAND_NONE; + return ret; +} + +static void generic_done(int result) +{ + command_status = result; + cont = &wakeup_cont; +} + +static void generic_success(void) +{ + cont->done(1); +} + +static void generic_failure(void) +{ + cont->done(0); +} + +static void success_and_wakeup(void) +{ + generic_success(); + cont->redo(); +} + +/* + * formatting and rw support. + * ========================== + */ + +static int next_valid_format(void) +{ + int probed_format; + + probed_format = DRS->probed_format; + while (1) { + if (probed_format >= 8 || !DP->autodetect[probed_format]) { + DRS->probed_format = 0; + return 1; + } + if (floppy_type[DP->autodetect[probed_format]].sect) { + DRS->probed_format = probed_format; + return 0; + } + probed_format++; + } +} + +static void bad_flp_intr(void) +{ + int err_count; + + if (probing) { + DRS->probed_format++; + if (!next_valid_format()) + return; + } + err_count = ++(*errors); + INFBOUND(DRWE->badness, err_count); + if (err_count > DP->max_errors.abort) + cont->done(0); + if (err_count > DP->max_errors.reset) + FDCS->reset = 1; + else if (err_count > DP->max_errors.recal) + DRS->track = NEED_2_RECAL; +} + +static void set_floppy(int drive) +{ + int type = ITYPE(UDRS->fd_device); + if (type) + _floppy = floppy_type + type; + else + _floppy = current_type[drive]; +} + +/* + * formatting support. + * =================== + */ +static void format_interrupt(void) +{ + switch (interpret_errors()) { + case 1: + cont->error(); + case 2: + break; + case 0: + cont->done(1); + } + cont->redo(); +} + +#define CODE2SIZE (ssize = ((1 << SIZECODE) + 3) >> 2) +#define FM_MODE(x,y) ((y) & ~(((x)->rate & 0x80) >>1)) +#define CT(x) ((x) | 0xc0) +static void setup_format_params(int track) +{ + struct fparm { + unsigned char track, head, sect, size; + } *here = (struct fparm *)floppy_track_buffer; + int il, n; + int count, head_shift, track_shift; + + raw_cmd = &default_raw_cmd; + raw_cmd->track = track; + + raw_cmd->flags = FD_RAW_WRITE | FD_RAW_INTR | FD_RAW_SPIN | + FD_RAW_NEED_DISK | FD_RAW_NEED_SEEK; + raw_cmd->rate = _floppy->rate & 0x43; + raw_cmd->cmd_count = NR_F; + COMMAND = FM_MODE(_floppy, FD_FORMAT); + DR_SELECT = UNIT(current_drive) + PH_HEAD(_floppy, format_req.head); + F_SIZECODE = FD_SIZECODE(_floppy); + F_SECT_PER_TRACK = _floppy->sect << 2 >> F_SIZECODE; + F_GAP = _floppy->fmt_gap; + F_FILL = FD_FILL_BYTE; + + raw_cmd->kernel_data = floppy_track_buffer; + raw_cmd->length = 4 * F_SECT_PER_TRACK; + + /* allow for about 30ms for data transport per track */ + head_shift = (F_SECT_PER_TRACK + 5) / 6; + + /* a ``cylinder'' is two tracks plus a little stepping time */ + track_shift = 2 * head_shift + 3; + + /* position of logical sector 1 on this track */ + n = (track_shift * format_req.track + head_shift * format_req.head) + % F_SECT_PER_TRACK; + + /* determine interleave */ + il = 1; + if (_floppy->fmt_gap < 0x22) + il++; + + /* initialize field */ + for (count = 0; count < F_SECT_PER_TRACK; ++count) { + here[count].track = format_req.track; + here[count].head = format_req.head; + here[count].sect = 0; + here[count].size = F_SIZECODE; + } + /* place logical sectors */ + for (count = 1; count <= F_SECT_PER_TRACK; ++count) { + here[n].sect = count; + n = (n + il) % F_SECT_PER_TRACK; + if (here[n].sect) { /* sector busy, find next free sector */ + ++n; + if (n >= F_SECT_PER_TRACK) { + n -= F_SECT_PER_TRACK; + while (here[n].sect) + ++n; + } + } + } + if (_floppy->stretch & FD_ZEROBASED) { + for (count = 0; count < F_SECT_PER_TRACK; count++) + here[count].sect--; + } +} + +static void redo_format(void) +{ + buffer_track = -1; + setup_format_params(format_req.track << STRETCH(_floppy)); + floppy_start(); + debugt("queue format request"); +} + +static struct cont_t format_cont = { + .interrupt = format_interrupt, + .redo = redo_format, + .error = bad_flp_intr, + .done = generic_done +}; + +static int do_format(int drive, struct format_descr *tmp_format_req) +{ + int ret; + + LOCK_FDC(drive, 1); + set_floppy(drive); + if (!_floppy || + _floppy->track > DP->tracks || + tmp_format_req->track >= _floppy->track || + tmp_format_req->head >= _floppy->head || + (_floppy->sect << 2) % (1 << FD_SIZECODE(_floppy)) || + !_floppy->fmt_gap) { + process_fd_request(); + return -EINVAL; + } + format_req = *tmp_format_req; + format_errors = 0; + cont = &format_cont; + errors = &format_errors; + IWAIT(redo_format); + process_fd_request(); + return ret; +} + +/* + * Buffer read/write and support + * ============================= + */ + +static void floppy_end_request(struct request *req, int uptodate) +{ + unsigned int nr_sectors = current_count_sectors; + + /* current_count_sectors can be zero if transfer failed */ + if (!uptodate) + nr_sectors = req->current_nr_sectors; + if (end_that_request_first(req, uptodate, nr_sectors)) + return; + add_disk_randomness(req->rq_disk); + floppy_off((long)req->rq_disk->private_data); + blkdev_dequeue_request(req); + end_that_request_last(req); + + /* We're done with the request */ + current_req = NULL; +} + +/* new request_done. Can handle physical sectors which are smaller than a + * logical buffer */ +static void request_done(int uptodate) +{ + struct request_queue *q = floppy_queue; + struct request *req = current_req; + unsigned long flags; + int block; + + probing = 0; + reschedule_timeout(MAXTIMEOUT, "request done %d", uptodate); + + if (!req) { + printk("floppy.c: no request in request_done\n"); + return; + } + + if (uptodate) { + /* maintain values for invalidation on geometry + * change */ + block = current_count_sectors + req->sector; + INFBOUND(DRS->maxblock, block); + if (block > _floppy->sect) + DRS->maxtrack = 1; + + /* unlock chained buffers */ + spin_lock_irqsave(q->queue_lock, flags); + floppy_end_request(req, 1); + spin_unlock_irqrestore(q->queue_lock, flags); + } else { + if (rq_data_dir(req) == WRITE) { + /* record write error information */ + DRWE->write_errors++; + if (DRWE->write_errors == 1) { + DRWE->first_error_sector = req->sector; + DRWE->first_error_generation = DRS->generation; + } + DRWE->last_error_sector = req->sector; + DRWE->last_error_generation = DRS->generation; + } + spin_lock_irqsave(q->queue_lock, flags); + floppy_end_request(req, 0); + spin_unlock_irqrestore(q->queue_lock, flags); + } +} + +/* Interrupt handler evaluating the result of the r/w operation */ +static void rw_interrupt(void) +{ + int nr_sectors, ssize, eoc, heads; + + if (R_HEAD >= 2) { + /* some Toshiba floppy controllers occasionnally seem to + * return bogus interrupts after read/write operations, which + * can be recognized by a bad head number (>= 2) */ + return; + } + + if (!DRS->first_read_date) + DRS->first_read_date = jiffies; + + nr_sectors = 0; + CODE2SIZE; + + if (ST1 & ST1_EOC) + eoc = 1; + else + eoc = 0; + + if (COMMAND & 0x80) + heads = 2; + else + heads = 1; + + nr_sectors = (((R_TRACK - TRACK) * heads + + R_HEAD - HEAD) * SECT_PER_TRACK + + R_SECTOR - SECTOR + eoc) << SIZECODE >> 2; + +#ifdef FLOPPY_SANITY_CHECK + if (nr_sectors / ssize > + (in_sector_offset + current_count_sectors + ssize - 1) / ssize) { + DPRINT("long rw: %x instead of %lx\n", + nr_sectors, current_count_sectors); + printk("rs=%d s=%d\n", R_SECTOR, SECTOR); + printk("rh=%d h=%d\n", R_HEAD, HEAD); + printk("rt=%d t=%d\n", R_TRACK, TRACK); + printk("heads=%d eoc=%d\n", heads, eoc); + printk("spt=%d st=%d ss=%d\n", SECT_PER_TRACK, + fsector_t, ssize); + printk("in_sector_offset=%d\n", in_sector_offset); + } +#endif + + nr_sectors -= in_sector_offset; + INFBOUND(nr_sectors, 0); + SUPBOUND(current_count_sectors, nr_sectors); + + switch (interpret_errors()) { + case 2: + cont->redo(); + return; + case 1: + if (!current_count_sectors) { + cont->error(); + cont->redo(); + return; + } + break; + case 0: + if (!current_count_sectors) { + cont->redo(); + return; + } + current_type[current_drive] = _floppy; + floppy_sizes[TOMINOR(current_drive)] = _floppy->size; + break; + } + + if (probing) { + if (DP->flags & FTD_MSG) + DPRINT("Auto-detected floppy type %s in fd%d\n", + _floppy->name, current_drive); + current_type[current_drive] = _floppy; + floppy_sizes[TOMINOR(current_drive)] = _floppy->size; + probing = 0; + } + + if (CT(COMMAND) != FD_READ || + raw_cmd->kernel_data == current_req->buffer) { + /* transfer directly from buffer */ + cont->done(1); + } else if (CT(COMMAND) == FD_READ) { + buffer_track = raw_cmd->track; + buffer_drive = current_drive; + INFBOUND(buffer_max, nr_sectors + fsector_t); + } + cont->redo(); +} + +/* Compute maximal contiguous buffer size. */ +static int buffer_chain_size(void) +{ + struct bio *bio; + struct bio_vec *bv; + int size, i; + char *base; + + base = bio_data(current_req->bio); + size = 0; + + rq_for_each_bio(bio, current_req) { + bio_for_each_segment(bv, bio, i) { + if (page_address(bv->bv_page) + bv->bv_offset != + base + size) + break; + + size += bv->bv_len; + } + } + + return size >> 9; +} + +/* Compute the maximal transfer size */ +static int transfer_size(int ssize, int max_sector, int max_size) +{ + SUPBOUND(max_sector, fsector_t + max_size); + + /* alignment */ + max_sector -= (max_sector % _floppy->sect) % ssize; + + /* transfer size, beginning not aligned */ + current_count_sectors = max_sector - fsector_t; + + return max_sector; +} + +/* + * Move data from/to the track buffer to/from the buffer cache. + */ +static void copy_buffer(int ssize, int max_sector, int max_sector_2) +{ + int remaining; /* number of transferred 512-byte sectors */ + struct bio_vec *bv; + struct bio *bio; + char *buffer, *dma_buffer; + int size, i; + + max_sector = transfer_size(ssize, + min(max_sector, max_sector_2), + current_req->nr_sectors); + + if (current_count_sectors <= 0 && CT(COMMAND) == FD_WRITE && + buffer_max > fsector_t + current_req->nr_sectors) + current_count_sectors = min_t(int, buffer_max - fsector_t, + current_req->nr_sectors); + + remaining = current_count_sectors << 9; +#ifdef FLOPPY_SANITY_CHECK + if ((remaining >> 9) > current_req->nr_sectors && + CT(COMMAND) == FD_WRITE) { + DPRINT("in copy buffer\n"); + printk("current_count_sectors=%ld\n", current_count_sectors); + printk("remaining=%d\n", remaining >> 9); + printk("current_req->nr_sectors=%ld\n", + current_req->nr_sectors); + printk("current_req->current_nr_sectors=%u\n", + current_req->current_nr_sectors); + printk("max_sector=%d\n", max_sector); + printk("ssize=%d\n", ssize); + } +#endif + + buffer_max = max(max_sector, buffer_max); + + dma_buffer = floppy_track_buffer + ((fsector_t - buffer_min) << 9); + + size = current_req->current_nr_sectors << 9; + + rq_for_each_bio(bio, current_req) { + bio_for_each_segment(bv, bio, i) { + if (!remaining) + break; + + size = bv->bv_len; + SUPBOUND(size, remaining); + + buffer = page_address(bv->bv_page) + bv->bv_offset; +#ifdef FLOPPY_SANITY_CHECK + if (dma_buffer + size > + floppy_track_buffer + (max_buffer_sectors << 10) || + dma_buffer < floppy_track_buffer) { + DPRINT("buffer overrun in copy buffer %d\n", + (int)((floppy_track_buffer - + dma_buffer) >> 9)); + printk("fsector_t=%d buffer_min=%d\n", + fsector_t, buffer_min); + printk("current_count_sectors=%ld\n", + current_count_sectors); + if (CT(COMMAND) == FD_READ) + printk("read\n"); + if (CT(COMMAND) == FD_WRITE) + printk("write\n"); + break; + } + if (((unsigned long)buffer) % 512) + DPRINT("%p buffer not aligned\n", buffer); +#endif + if (CT(COMMAND) == FD_READ) + memcpy(buffer, dma_buffer, size); + else + memcpy(dma_buffer, buffer, size); + + remaining -= size; + dma_buffer += size; + } + } +#ifdef FLOPPY_SANITY_CHECK + if (remaining) { + if (remaining > 0) + max_sector -= remaining >> 9; + DPRINT("weirdness: remaining %d\n", remaining >> 9); + } +#endif +} + +#if 0 +static inline int check_dma_crossing(char *start, + unsigned long length, char *message) +{ + if (CROSS_64KB(start, length)) { + printk("DMA xfer crosses 64KB boundary in %s %p-%p\n", + message, start, start + length); + return 1; + } else + return 0; +} +#endif + +/* work around a bug in pseudo DMA + * (on some FDCs) pseudo DMA does not stop when the CPU stops + * sending data. Hence we need a different way to signal the + * transfer length: We use SECT_PER_TRACK. Unfortunately, this + * does not work with MT, hence we can only transfer one head at + * a time + */ +static void virtualdmabug_workaround(void) +{ + int hard_sectors, end_sector; + + if (CT(COMMAND) == FD_WRITE) { + COMMAND &= ~0x80; /* switch off multiple track mode */ + + hard_sectors = raw_cmd->length >> (7 + SIZECODE); + end_sector = SECTOR + hard_sectors - 1; +#ifdef FLOPPY_SANITY_CHECK + if (end_sector > SECT_PER_TRACK) { + printk("too many sectors %d > %d\n", + end_sector, SECT_PER_TRACK); + return; + } +#endif + SECT_PER_TRACK = end_sector; /* make sure SECT_PER_TRACK points + * to end of transfer */ + } +} + +/* + * Formulate a read/write request. + * this routine decides where to load the data (directly to buffer, or to + * tmp floppy area), how much data to load (the size of the buffer, the whole + * track, or a single sector) + * All floppy_track_buffer handling goes in here. If we ever add track buffer + * allocation on the fly, it should be done here. No other part should need + * modification. + */ + +static int make_raw_rw_request(void) +{ + int aligned_sector_t; + int max_sector, max_size, tracksize, ssize; + + if (max_buffer_sectors == 0) { + printk("VFS: Block I/O scheduled on unopened device\n"); + return 0; + } + + set_fdc((long)current_req->rq_disk->private_data); + + raw_cmd = &default_raw_cmd; + raw_cmd->flags = FD_RAW_SPIN | FD_RAW_NEED_DISK | FD_RAW_NEED_DISK | + FD_RAW_NEED_SEEK; + raw_cmd->cmd_count = NR_RW; + if (rq_data_dir(current_req) == READ) { + raw_cmd->flags |= FD_RAW_READ; + COMMAND = FM_MODE(_floppy, FD_READ); + } else if (rq_data_dir(current_req) == WRITE) { + raw_cmd->flags |= FD_RAW_WRITE; + COMMAND = FM_MODE(_floppy, FD_WRITE); + } else { + DPRINT("make_raw_rw_request: unknown command\n"); + return 0; + } + + max_sector = _floppy->sect * _floppy->head; + + TRACK = (int)current_req->sector / max_sector; + fsector_t = (int)current_req->sector % max_sector; + if (_floppy->track && TRACK >= _floppy->track) { + if (current_req->current_nr_sectors & 1) { + current_count_sectors = 1; + return 1; + } else + return 0; + } + HEAD = fsector_t / _floppy->sect; + + if (((_floppy->stretch & (FD_SWAPSIDES | FD_ZEROBASED)) || + TESTF(FD_NEED_TWADDLE)) && fsector_t < _floppy->sect) + max_sector = _floppy->sect; + + /* 2M disks have phantom sectors on the first track */ + if ((_floppy->rate & FD_2M) && (!TRACK) && (!HEAD)) { + max_sector = 2 * _floppy->sect / 3; + if (fsector_t >= max_sector) { + current_count_sectors = + min_t(int, _floppy->sect - fsector_t, + current_req->nr_sectors); + return 1; + } + SIZECODE = 2; + } else + SIZECODE = FD_SIZECODE(_floppy); + raw_cmd->rate = _floppy->rate & 0x43; + if ((_floppy->rate & FD_2M) && (TRACK || HEAD) && raw_cmd->rate == 2) + raw_cmd->rate = 1; + + if (SIZECODE) + SIZECODE2 = 0xff; + else + SIZECODE2 = 0x80; + raw_cmd->track = TRACK << STRETCH(_floppy); + DR_SELECT = UNIT(current_drive) + PH_HEAD(_floppy, HEAD); + GAP = _floppy->gap; + CODE2SIZE; + SECT_PER_TRACK = _floppy->sect << 2 >> SIZECODE; + SECTOR = ((fsector_t % _floppy->sect) << 2 >> SIZECODE) + + ((_floppy->stretch & FD_ZEROBASED) ? 0 : 1); + + /* tracksize describes the size which can be filled up with sectors + * of size ssize. + */ + tracksize = _floppy->sect - _floppy->sect % ssize; + if (tracksize < _floppy->sect) { + SECT_PER_TRACK++; + if (tracksize <= fsector_t % _floppy->sect) + SECTOR--; + + /* if we are beyond tracksize, fill up using smaller sectors */ + while (tracksize <= fsector_t % _floppy->sect) { + while (tracksize + ssize > _floppy->sect) { + SIZECODE--; + ssize >>= 1; + } + SECTOR++; + SECT_PER_TRACK++; + tracksize += ssize; + } + max_sector = HEAD * _floppy->sect + tracksize; + } else if (!TRACK && !HEAD && !(_floppy->rate & FD_2M) && probing) { + max_sector = _floppy->sect; + } else if (!HEAD && CT(COMMAND) == FD_WRITE) { + /* for virtual DMA bug workaround */ + max_sector = _floppy->sect; + } + + in_sector_offset = (fsector_t % _floppy->sect) % ssize; + aligned_sector_t = fsector_t - in_sector_offset; + max_size = current_req->nr_sectors; + if ((raw_cmd->track == buffer_track) && + (current_drive == buffer_drive) && + (fsector_t >= buffer_min) && (fsector_t < buffer_max)) { + /* data already in track buffer */ + if (CT(COMMAND) == FD_READ) { + copy_buffer(1, max_sector, buffer_max); + return 1; + } + } else if (in_sector_offset || current_req->nr_sectors < ssize) { + if (CT(COMMAND) == FD_WRITE) { + if (fsector_t + current_req->nr_sectors > ssize && + fsector_t + current_req->nr_sectors < ssize + ssize) + max_size = ssize + ssize; + else + max_size = ssize; + } + raw_cmd->flags &= ~FD_RAW_WRITE; + raw_cmd->flags |= FD_RAW_READ; + COMMAND = FM_MODE(_floppy, FD_READ); + } else if ((unsigned long)current_req->buffer < MAX_DMA_ADDRESS) { + unsigned long dma_limit; + int direct, indirect; + + indirect = + transfer_size(ssize, max_sector, + max_buffer_sectors * 2) - fsector_t; + + /* + * Do NOT use minimum() here---MAX_DMA_ADDRESS is 64 bits wide + * on a 64 bit machine! + */ + max_size = buffer_chain_size(); + dma_limit = + (MAX_DMA_ADDRESS - + ((unsigned long)current_req->buffer)) >> 9; + if ((unsigned long)max_size > dma_limit) { + max_size = dma_limit; + } + /* 64 kb boundaries */ + if (CROSS_64KB(current_req->buffer, max_size << 9)) + max_size = (K_64 - + ((unsigned long)current_req->buffer) % + K_64) >> 9; + direct = transfer_size(ssize, max_sector, max_size) - fsector_t; + /* + * We try to read tracks, but if we get too many errors, we + * go back to reading just one sector at a time. + * + * This means we should be able to read a sector even if there + * are other bad sectors on this track. + */ + if (!direct || + (indirect * 2 > direct * 3 && + *errors < DP->max_errors.read_track && + /*!TESTF(FD_NEED_TWADDLE) && */ + ((!probing + || (DP->read_track & (1 << DRS->probed_format)))))) { + max_size = current_req->nr_sectors; + } else { + raw_cmd->kernel_data = current_req->buffer; + raw_cmd->length = current_count_sectors << 9; + if (raw_cmd->length == 0) { + DPRINT + ("zero dma transfer attempted from make_raw_request\n"); + DPRINT("indirect=%d direct=%d fsector_t=%d", + indirect, direct, fsector_t); + return 0; + } +/* check_dma_crossing(raw_cmd->kernel_data, + raw_cmd->length, + "end of make_raw_request [1]");*/ + + virtualdmabug_workaround(); + return 2; + } + } + + if (CT(COMMAND) == FD_READ) + max_size = max_sector; /* unbounded */ + + /* claim buffer track if needed */ + if (buffer_track != raw_cmd->track || /* bad track */ + buffer_drive != current_drive || /* bad drive */ + fsector_t > buffer_max || + fsector_t < buffer_min || + ((CT(COMMAND) == FD_READ || + (!in_sector_offset && current_req->nr_sectors >= ssize)) && + max_sector > 2 * max_buffer_sectors + buffer_min && + max_size + fsector_t > 2 * max_buffer_sectors + buffer_min) + /* not enough space */ + ) { + buffer_track = -1; + buffer_drive = current_drive; + buffer_max = buffer_min = aligned_sector_t; + } + raw_cmd->kernel_data = floppy_track_buffer + + ((aligned_sector_t - buffer_min) << 9); + + if (CT(COMMAND) == FD_WRITE) { + /* copy write buffer to track buffer. + * if we get here, we know that the write + * is either aligned or the data already in the buffer + * (buffer will be overwritten) */ +#ifdef FLOPPY_SANITY_CHECK + if (in_sector_offset && buffer_track == -1) + DPRINT("internal error offset !=0 on write\n"); +#endif + buffer_track = raw_cmd->track; + buffer_drive = current_drive; + copy_buffer(ssize, max_sector, + 2 * max_buffer_sectors + buffer_min); + } else + transfer_size(ssize, max_sector, + 2 * max_buffer_sectors + buffer_min - + aligned_sector_t); + + /* round up current_count_sectors to get dma xfer size */ + raw_cmd->length = in_sector_offset + current_count_sectors; + raw_cmd->length = ((raw_cmd->length - 1) | (ssize - 1)) + 1; + raw_cmd->length <<= 9; +#ifdef FLOPPY_SANITY_CHECK + /*check_dma_crossing(raw_cmd->kernel_data, raw_cmd->length, + "end of make_raw_request"); */ + if ((raw_cmd->length < current_count_sectors << 9) || + (raw_cmd->kernel_data != current_req->buffer && + CT(COMMAND) == FD_WRITE && + (aligned_sector_t + (raw_cmd->length >> 9) > buffer_max || + aligned_sector_t < buffer_min)) || + raw_cmd->length % (128 << SIZECODE) || + raw_cmd->length <= 0 || current_count_sectors <= 0) { + DPRINT("fractionary current count b=%lx s=%lx\n", + raw_cmd->length, current_count_sectors); + if (raw_cmd->kernel_data != current_req->buffer) + printk("addr=%d, length=%ld\n", + (int)((raw_cmd->kernel_data - + floppy_track_buffer) >> 9), + current_count_sectors); + printk("st=%d ast=%d mse=%d msi=%d\n", + fsector_t, aligned_sector_t, max_sector, max_size); + printk("ssize=%x SIZECODE=%d\n", ssize, SIZECODE); + printk("command=%x SECTOR=%d HEAD=%d, TRACK=%d\n", + COMMAND, SECTOR, HEAD, TRACK); + printk("buffer drive=%d\n", buffer_drive); + printk("buffer track=%d\n", buffer_track); + printk("buffer_min=%d\n", buffer_min); + printk("buffer_max=%d\n", buffer_max); + return 0; + } + + if (raw_cmd->kernel_data != current_req->buffer) { + if (raw_cmd->kernel_data < floppy_track_buffer || + current_count_sectors < 0 || + raw_cmd->length < 0 || + raw_cmd->kernel_data + raw_cmd->length > + floppy_track_buffer + (max_buffer_sectors << 10)) { + DPRINT("buffer overrun in schedule dma\n"); + printk("fsector_t=%d buffer_min=%d current_count=%ld\n", + fsector_t, buffer_min, raw_cmd->length >> 9); + printk("current_count_sectors=%ld\n", + current_count_sectors); + if (CT(COMMAND) == FD_READ) + printk("read\n"); + if (CT(COMMAND) == FD_WRITE) + printk("write\n"); + return 0; + } + } else if (raw_cmd->length > current_req->nr_sectors << 9 || + current_count_sectors > current_req->nr_sectors) { + DPRINT("buffer overrun in direct transfer\n"); + return 0; + } else if (raw_cmd->length < current_count_sectors << 9) { + DPRINT("more sectors than bytes\n"); + printk("bytes=%ld\n", raw_cmd->length >> 9); + printk("sectors=%ld\n", current_count_sectors); + } + if (raw_cmd->length == 0) { + DPRINT("zero dma transfer attempted from make_raw_request\n"); + return 0; + } +#endif + + virtualdmabug_workaround(); + return 2; +} + +static void redo_fd_request(void) +{ +#define REPEAT {request_done(0); continue; } + int drive; + int tmp; + + lastredo = jiffies; + if (current_drive < N_DRIVE) + floppy_off(current_drive); + + for (;;) { + if (!current_req) { + struct request *req; + + spin_lock_irq(floppy_queue->queue_lock); + req = elv_next_request(floppy_queue); + spin_unlock_irq(floppy_queue->queue_lock); + if (!req) { + do_floppy = NULL; + unlock_fdc(); + return; + } + current_req = req; + } + drive = (long)current_req->rq_disk->private_data; + set_fdc(drive); + reschedule_timeout(current_reqD, "redo fd request", 0); + + set_floppy(drive); + raw_cmd = &default_raw_cmd; + raw_cmd->flags = 0; + if (start_motor(redo_fd_request)) + return; + disk_change(current_drive); + if (test_bit(current_drive, &fake_change) || + TESTF(FD_DISK_CHANGED)) { + DPRINT("disk absent or changed during operation\n"); + REPEAT; + } + if (!_floppy) { /* Autodetection */ + if (!probing) { + DRS->probed_format = 0; + if (next_valid_format()) { + DPRINT("no autodetectable formats\n"); + _floppy = NULL; + REPEAT; + } + } + probing = 1; + _floppy = + floppy_type + DP->autodetect[DRS->probed_format]; + } else + probing = 0; + errors = &(current_req->errors); + tmp = make_raw_rw_request(); + if (tmp < 2) { + request_done(tmp); + continue; + } + + if (TESTF(FD_NEED_TWADDLE)) + twaddle(); + schedule_bh(floppy_start); + debugt("queue fd request"); + return; + } +#undef REPEAT +} + +static struct cont_t rw_cont = { + .interrupt = rw_interrupt, + .redo = redo_fd_request, + .error = bad_flp_intr, + .done = request_done +}; + +static void process_fd_request(void) +{ + cont = &rw_cont; + schedule_bh(redo_fd_request); +} + +static void do_fd_request(request_queue_t * q) +{ + if (max_buffer_sectors == 0) { + printk("VFS: do_fd_request called on non-open device\n"); + return; + } + + if (usage_count == 0) { + printk("warning: usage count=0, current_req=%p exiting\n", + current_req); + printk("sect=%ld flags=%lx\n", (long)current_req->sector, + current_req->flags); + return; + } + if (test_bit(0, &fdc_busy)) { + /* fdc busy, this new request will be treated when the + current one is done */ + is_alive("do fd request, old request running"); + return; + } + lock_fdc(MAXTIMEOUT, 0); + process_fd_request(); + is_alive("do fd request"); +} + +static struct cont_t poll_cont = { + .interrupt = success_and_wakeup, + .redo = floppy_ready, + .error = generic_failure, + .done = generic_done +}; + +static int poll_drive(int interruptible, int flag) +{ + int ret; + /* no auto-sense, just clear dcl */ + raw_cmd = &default_raw_cmd; + raw_cmd->flags = flag; + raw_cmd->track = 0; + raw_cmd->cmd_count = 0; + cont = &poll_cont; +#ifdef DCL_DEBUG + if (DP->flags & FD_DEBUG) { + DPRINT("setting NEWCHANGE in poll_drive\n"); + } +#endif + SETF(FD_DISK_NEWCHANGE); + WAIT(floppy_ready); + return ret; +} + +/* + * User triggered reset + * ==================== + */ + +static void reset_intr(void) +{ + printk("weird, reset interrupt called\n"); +} + +static struct cont_t reset_cont = { + .interrupt = reset_intr, + .redo = success_and_wakeup, + .error = generic_failure, + .done = generic_done +}; + +static int user_reset_fdc(int drive, int arg, int interruptible) +{ + int ret; + + ret = 0; + LOCK_FDC(drive, interruptible); + if (arg == FD_RESET_ALWAYS) + FDCS->reset = 1; + if (FDCS->reset) { + cont = &reset_cont; + WAIT(reset_fdc); + } + process_fd_request(); + return ret; +} + +/* + * Misc Ioctl's and support + * ======================== + */ +static inline int fd_copyout(void __user *param, const void *address, + unsigned long size) +{ + return copy_to_user(param, address, size) ? -EFAULT : 0; +} + +static inline int fd_copyin(void __user *param, void *address, unsigned long size) +{ + return copy_from_user(address, param, size) ? -EFAULT : 0; +} + +#define _COPYOUT(x) (copy_to_user((void __user *)param, &(x), sizeof(x)) ? -EFAULT : 0) +#define _COPYIN(x) (copy_from_user(&(x), (void __user *)param, sizeof(x)) ? -EFAULT : 0) + +#define COPYOUT(x) ECALL(_COPYOUT(x)) +#define COPYIN(x) ECALL(_COPYIN(x)) + +static inline const char *drive_name(int type, int drive) +{ + struct floppy_struct *floppy; + + if (type) + floppy = floppy_type + type; + else { + if (UDP->native_format) + floppy = floppy_type + UDP->native_format; + else + return "(null)"; + } + if (floppy->name) + return floppy->name; + else + return "(null)"; +} + +/* raw commands */ +static void raw_cmd_done(int flag) +{ + int i; + + if (!flag) { + raw_cmd->flags |= FD_RAW_FAILURE; + raw_cmd->flags |= FD_RAW_HARDFAILURE; + } else { + raw_cmd->reply_count = inr; + if (raw_cmd->reply_count > MAX_REPLIES) + raw_cmd->reply_count = 0; + for (i = 0; i < raw_cmd->reply_count; i++) + raw_cmd->reply[i] = reply_buffer[i]; + + if (raw_cmd->flags & (FD_RAW_READ | FD_RAW_WRITE)) { + unsigned long flags; + flags = claim_dma_lock(); + raw_cmd->length = fd_get_dma_residue(); + release_dma_lock(flags); + } + + if ((raw_cmd->flags & FD_RAW_SOFTFAILURE) && + (!raw_cmd->reply_count || (raw_cmd->reply[0] & 0xc0))) + raw_cmd->flags |= FD_RAW_FAILURE; + + if (disk_change(current_drive)) + raw_cmd->flags |= FD_RAW_DISK_CHANGE; + else + raw_cmd->flags &= ~FD_RAW_DISK_CHANGE; + if (raw_cmd->flags & FD_RAW_NO_MOTOR_AFTER) + motor_off_callback(current_drive); + + if (raw_cmd->next && + (!(raw_cmd->flags & FD_RAW_FAILURE) || + !(raw_cmd->flags & FD_RAW_STOP_IF_FAILURE)) && + ((raw_cmd->flags & FD_RAW_FAILURE) || + !(raw_cmd->flags & FD_RAW_STOP_IF_SUCCESS))) { + raw_cmd = raw_cmd->next; + return; + } + } + generic_done(flag); +} + +static struct cont_t raw_cmd_cont = { + .interrupt = success_and_wakeup, + .redo = floppy_start, + .error = generic_failure, + .done = raw_cmd_done +}; + +static inline int raw_cmd_copyout(int cmd, char __user *param, + struct floppy_raw_cmd *ptr) +{ + int ret; + + while (ptr) { + COPYOUT(*ptr); + param += sizeof(struct floppy_raw_cmd); + if ((ptr->flags & FD_RAW_READ) && ptr->buffer_length) { + if (ptr->length >= 0 + && ptr->length <= ptr->buffer_length) + ECALL(fd_copyout + (ptr->data, ptr->kernel_data, + ptr->buffer_length - ptr->length)); + } + ptr = ptr->next; + } + return 0; +} + +static void raw_cmd_free(struct floppy_raw_cmd **ptr) +{ + struct floppy_raw_cmd *next, *this; + + this = *ptr; + *ptr = NULL; + while (this) { + if (this->buffer_length) { + fd_dma_mem_free((unsigned long)this->kernel_data, + this->buffer_length); + this->buffer_length = 0; + } + next = this->next; + kfree(this); + this = next; + } +} + +static inline int raw_cmd_copyin(int cmd, char __user *param, + struct floppy_raw_cmd **rcmd) +{ + struct floppy_raw_cmd *ptr; + int ret; + int i; + + *rcmd = NULL; + while (1) { + ptr = (struct floppy_raw_cmd *) + kmalloc(sizeof(struct floppy_raw_cmd), GFP_USER); + if (!ptr) + return -ENOMEM; + *rcmd = ptr; + COPYIN(*ptr); + ptr->next = NULL; + ptr->buffer_length = 0; + param += sizeof(struct floppy_raw_cmd); + if (ptr->cmd_count > 33) + /* the command may now also take up the space + * initially intended for the reply & the + * reply count. Needed for long 82078 commands + * such as RESTORE, which takes ... 17 command + * bytes. Murphy's law #137: When you reserve + * 16 bytes for a structure, you'll one day + * discover that you really need 17... + */ + return -EINVAL; + + for (i = 0; i < 16; i++) + ptr->reply[i] = 0; + ptr->resultcode = 0; + ptr->kernel_data = NULL; + + if (ptr->flags & (FD_RAW_READ | FD_RAW_WRITE)) { + if (ptr->length <= 0) + return -EINVAL; + ptr->kernel_data = + (char *)fd_dma_mem_alloc(ptr->length); + fallback_on_nodma_alloc(&ptr->kernel_data, ptr->length); + if (!ptr->kernel_data) + return -ENOMEM; + ptr->buffer_length = ptr->length; + } + if (ptr->flags & FD_RAW_WRITE) + ECALL(fd_copyin(ptr->data, ptr->kernel_data, + ptr->length)); + rcmd = &(ptr->next); + if (!(ptr->flags & FD_RAW_MORE)) + return 0; + ptr->rate &= 0x43; + } +} + +static int raw_cmd_ioctl(int cmd, void __user *param) +{ + int drive, ret, ret2; + struct floppy_raw_cmd *my_raw_cmd; + + if (FDCS->rawcmd <= 1) + FDCS->rawcmd = 1; + for (drive = 0; drive < N_DRIVE; drive++) { + if (FDC(drive) != fdc) + continue; + if (drive == current_drive) { + if (UDRS->fd_ref > 1) { + FDCS->rawcmd = 2; + break; + } + } else if (UDRS->fd_ref) { + FDCS->rawcmd = 2; + break; + } + } + + if (FDCS->reset) + return -EIO; + + ret = raw_cmd_copyin(cmd, param, &my_raw_cmd); + if (ret) { + raw_cmd_free(&my_raw_cmd); + return ret; + } + + raw_cmd = my_raw_cmd; + cont = &raw_cmd_cont; + ret = wait_til_done(floppy_start, 1); +#ifdef DCL_DEBUG + if (DP->flags & FD_DEBUG) { + DPRINT("calling disk change from raw_cmd ioctl\n"); + } +#endif + + if (ret != -EINTR && FDCS->reset) + ret = -EIO; + + DRS->track = NO_TRACK; + + ret2 = raw_cmd_copyout(cmd, param, my_raw_cmd); + if (!ret) + ret = ret2; + raw_cmd_free(&my_raw_cmd); + return ret; +} + +static int invalidate_drive(struct block_device *bdev) +{ + /* invalidate the buffer track to force a reread */ + set_bit((long)bdev->bd_disk->private_data, &fake_change); + process_fd_request(); + check_disk_change(bdev); + return 0; +} + +static inline int set_geometry(unsigned int cmd, struct floppy_struct *g, + int drive, int type, struct block_device *bdev) +{ + int cnt; + + /* sanity checking for parameters. */ + if (g->sect <= 0 || + g->head <= 0 || + g->track <= 0 || g->track > UDP->tracks >> STRETCH(g) || + /* check if reserved bits are set */ + (g->stretch & ~(FD_STRETCH | FD_SWAPSIDES | FD_ZEROBASED)) != 0) + return -EINVAL; + if (type) { + if (!capable(CAP_SYS_ADMIN)) + return -EPERM; + down(&open_lock); + LOCK_FDC(drive, 1); + floppy_type[type] = *g; + floppy_type[type].name = "user format"; + for (cnt = type << 2; cnt < (type << 2) + 4; cnt++) + floppy_sizes[cnt] = floppy_sizes[cnt + 0x80] = + floppy_type[type].size + 1; + process_fd_request(); + for (cnt = 0; cnt < N_DRIVE; cnt++) { + struct block_device *bdev = opened_bdev[cnt]; + if (!bdev || ITYPE(drive_state[cnt].fd_device) != type) + continue; + __invalidate_device(bdev, 0); + } + up(&open_lock); + } else { + int oldStretch; + LOCK_FDC(drive, 1); + if (cmd != FDDEFPRM) + /* notice a disk change immediately, else + * we lose our settings immediately*/ + CALL(poll_drive(1, FD_RAW_NEED_DISK)); + oldStretch = g->stretch; + user_params[drive] = *g; + if (buffer_drive == drive) + SUPBOUND(buffer_max, user_params[drive].sect); + current_type[drive] = &user_params[drive]; + floppy_sizes[drive] = user_params[drive].size; + if (cmd == FDDEFPRM) + DRS->keep_data = -1; + else + DRS->keep_data = 1; + /* invalidation. Invalidate only when needed, i.e. + * when there are already sectors in the buffer cache + * whose number will change. This is useful, because + * mtools often changes the geometry of the disk after + * looking at the boot block */ + if (DRS->maxblock > user_params[drive].sect || + DRS->maxtrack || + ((user_params[drive].sect ^ oldStretch) & + (FD_SWAPSIDES | FD_ZEROBASED))) + invalidate_drive(bdev); + else + process_fd_request(); + } + return 0; +} + +/* handle obsolete ioctl's */ +static int ioctl_table[] = { + FDCLRPRM, + FDSETPRM, + FDDEFPRM, + FDGETPRM, + FDMSGON, + FDMSGOFF, + FDFMTBEG, + FDFMTTRK, + FDFMTEND, + FDSETEMSGTRESH, + FDFLUSH, + FDSETMAXERRS, + FDGETMAXERRS, + FDGETDRVTYP, + FDSETDRVPRM, + FDGETDRVPRM, + FDGETDRVSTAT, + FDPOLLDRVSTAT, + FDRESET, + FDGETFDCSTAT, + FDWERRORCLR, + FDWERRORGET, + FDRAWCMD, + FDEJECT, + FDTWADDLE +}; + +static inline int normalize_ioctl(int *cmd, int *size) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(ioctl_table); i++) { + if ((*cmd & 0xffff) == (ioctl_table[i] & 0xffff)) { + *size = _IOC_SIZE(*cmd); + *cmd = ioctl_table[i]; + if (*size > _IOC_SIZE(*cmd)) { + printk("ioctl not yet supported\n"); + return -EFAULT; + } + return 0; + } + } + return -EINVAL; +} + +static int get_floppy_geometry(int drive, int type, struct floppy_struct **g) +{ + if (type) + *g = &floppy_type[type]; + else { + LOCK_FDC(drive, 0); + CALL(poll_drive(0, 0)); + process_fd_request(); + *g = current_type[drive]; + } + if (!*g) + return -ENODEV; + return 0; +} + +static int fd_ioctl(struct inode *inode, struct file *filp, unsigned int cmd, + unsigned long param) +{ +#define FD_IOCTL_ALLOWED ((filp) && (filp)->private_data) +#define OUT(c,x) case c: outparam = (const char *) (x); break +#define IN(c,x,tag) case c: *(x) = inparam. tag ; return 0 + + int drive = (long)inode->i_bdev->bd_disk->private_data; + int i, type = ITYPE(UDRS->fd_device); + int ret; + int size; + union inparam { + struct floppy_struct g; /* geometry */ + struct format_descr f; + struct floppy_max_errors max_errors; + struct floppy_drive_params dp; + } inparam; /* parameters coming from user space */ + const char *outparam; /* parameters passed back to user space */ + + /* convert compatibility eject ioctls into floppy eject ioctl. + * We do this in order to provide a means to eject floppy disks before + * installing the new fdutils package */ + if (cmd == CDROMEJECT || /* CD-ROM eject */ + cmd == 0x6470 /* SunOS floppy eject */ ) { + DPRINT("obsolete eject ioctl\n"); + DPRINT("please use floppycontrol --eject\n"); + cmd = FDEJECT; + } + + /* generic block device ioctls */ + switch (cmd) { + /* the following have been inspired by the corresponding + * code for other block devices. */ + struct floppy_struct *g; + case HDIO_GETGEO: + { + struct hd_geometry loc; + ECALL(get_floppy_geometry(drive, type, &g)); + loc.heads = g->head; + loc.sectors = g->sect; + loc.cylinders = g->track; + loc.start = 0; + return _COPYOUT(loc); + } + } + + /* convert the old style command into a new style command */ + if ((cmd & 0xff00) == 0x0200) { + ECALL(normalize_ioctl(&cmd, &size)); + } else + return -EINVAL; + + /* permission checks */ + if (((cmd & 0x40) && !FD_IOCTL_ALLOWED) || + ((cmd & 0x80) && !capable(CAP_SYS_ADMIN))) + return -EPERM; + + /* copyin */ + CLEARSTRUCT(&inparam); + if (_IOC_DIR(cmd) & _IOC_WRITE) + ECALL(fd_copyin((void __user *)param, &inparam, size)) + + switch (cmd) { + case FDEJECT: + if (UDRS->fd_ref != 1) + /* somebody else has this drive open */ + return -EBUSY; + LOCK_FDC(drive, 1); + + /* do the actual eject. Fails on + * non-Sparc architectures */ + ret = fd_eject(UNIT(drive)); + + USETF(FD_DISK_CHANGED); + USETF(FD_VERIFY); + process_fd_request(); + return ret; + case FDCLRPRM: + LOCK_FDC(drive, 1); + current_type[drive] = NULL; + floppy_sizes[drive] = MAX_DISK_SIZE << 1; + UDRS->keep_data = 0; + return invalidate_drive(inode->i_bdev); + case FDSETPRM: + case FDDEFPRM: + return set_geometry(cmd, &inparam.g, + drive, type, inode->i_bdev); + case FDGETPRM: + ECALL(get_floppy_geometry(drive, type, + (struct floppy_struct **) + &outparam)); + break; + + case FDMSGON: + UDP->flags |= FTD_MSG; + return 0; + case FDMSGOFF: + UDP->flags &= ~FTD_MSG; + return 0; + + case FDFMTBEG: + LOCK_FDC(drive, 1); + CALL(poll_drive(1, FD_RAW_NEED_DISK)); + ret = UDRS->flags; + process_fd_request(); + if (ret & FD_VERIFY) + return -ENODEV; + if (!(ret & FD_DISK_WRITABLE)) + return -EROFS; + return 0; + case FDFMTTRK: + if (UDRS->fd_ref != 1) + return -EBUSY; + return do_format(drive, &inparam.f); + case FDFMTEND: + case FDFLUSH: + LOCK_FDC(drive, 1); + return invalidate_drive(inode->i_bdev); + + case FDSETEMSGTRESH: + UDP->max_errors.reporting = + (unsigned short)(param & 0x0f); + return 0; + OUT(FDGETMAXERRS, &UDP->max_errors); + IN(FDSETMAXERRS, &UDP->max_errors, max_errors); + + case FDGETDRVTYP: + outparam = drive_name(type, drive); + SUPBOUND(size, strlen(outparam) + 1); + break; + + IN(FDSETDRVPRM, UDP, dp); + OUT(FDGETDRVPRM, UDP); + + case FDPOLLDRVSTAT: + LOCK_FDC(drive, 1); + CALL(poll_drive(1, FD_RAW_NEED_DISK)); + process_fd_request(); + /* fall through */ + OUT(FDGETDRVSTAT, UDRS); + + case FDRESET: + return user_reset_fdc(drive, (int)param, 1); + + OUT(FDGETFDCSTAT, UFDCS); + + case FDWERRORCLR: + CLEARSTRUCT(UDRWE); + return 0; + OUT(FDWERRORGET, UDRWE); + + case FDRAWCMD: + if (type) + return -EINVAL; + LOCK_FDC(drive, 1); + set_floppy(drive); + CALL(i = raw_cmd_ioctl(cmd, (void __user *)param)); + process_fd_request(); + return i; + + case FDTWADDLE: + LOCK_FDC(drive, 1); + twaddle(); + process_fd_request(); + return 0; + + default: + return -EINVAL; + } + + if (_IOC_DIR(cmd) & _IOC_READ) + return fd_copyout((void __user *)param, outparam, size); + else + return 0; +#undef OUT +#undef IN +} + +static void __init config_types(void) +{ + int first = 1; + int drive; + + /* read drive info out of physical CMOS */ + drive = 0; + if (!UDP->cmos) + UDP->cmos = FLOPPY0_TYPE; + drive = 1; + if (!UDP->cmos && FLOPPY1_TYPE) + UDP->cmos = FLOPPY1_TYPE; + + /* XXX */ + /* additional physical CMOS drive detection should go here */ + + for (drive = 0; drive < N_DRIVE; drive++) { + unsigned int type = UDP->cmos; + struct floppy_drive_params *params; + const char *name = NULL; + static char temparea[32]; + + if (type < NUMBER(default_drive_params)) { + params = &default_drive_params[type].params; + if (type) { + name = default_drive_params[type].name; + allowed_drive_mask |= 1 << drive; + } else + allowed_drive_mask &= ~(1 << drive); + } else { + params = &default_drive_params[0].params; + sprintf(temparea, "unknown type %d (usb?)", type); + name = temparea; + } + if (name) { + const char *prepend = ","; + if (first) { + prepend = KERN_INFO "Floppy drive(s):"; + first = 0; + } + printk("%s fd%d is %s", prepend, drive, name); + register_devfs_entries(drive); + } + *UDP = *params; + } + if (!first) + printk("\n"); +} + +static int floppy_release(struct inode *inode, struct file *filp) +{ + int drive = (long)inode->i_bdev->bd_disk->private_data; + + down(&open_lock); + if (UDRS->fd_ref < 0) + UDRS->fd_ref = 0; + else if (!UDRS->fd_ref--) { + DPRINT("floppy_release with fd_ref == 0"); + UDRS->fd_ref = 0; + } + if (!UDRS->fd_ref) + opened_bdev[drive] = NULL; + floppy_release_irq_and_dma(); + up(&open_lock); + return 0; +} + +/* + * floppy_open check for aliasing (/dev/fd0 can be the same as + * /dev/PS0 etc), and disallows simultaneous access to the same + * drive with different device numbers. + */ +static int floppy_open(struct inode *inode, struct file *filp) +{ + int drive = (long)inode->i_bdev->bd_disk->private_data; + int old_dev; + int try; + int res = -EBUSY; + char *tmp; + + filp->private_data = (void *)0; + down(&open_lock); + old_dev = UDRS->fd_device; + if (opened_bdev[drive] && opened_bdev[drive] != inode->i_bdev) + goto out2; + + if (!UDRS->fd_ref && (UDP->flags & FD_BROKEN_DCL)) { + USETF(FD_DISK_CHANGED); + USETF(FD_VERIFY); + } + + if (UDRS->fd_ref == -1 || (UDRS->fd_ref && (filp->f_flags & O_EXCL))) + goto out2; + + if (floppy_grab_irq_and_dma()) + goto out2; + + if (filp->f_flags & O_EXCL) + UDRS->fd_ref = -1; + else + UDRS->fd_ref++; + + opened_bdev[drive] = inode->i_bdev; + + res = -ENXIO; + + if (!floppy_track_buffer) { + /* if opening an ED drive, reserve a big buffer, + * else reserve a small one */ + if ((UDP->cmos == 6) || (UDP->cmos == 5)) + try = 64; /* Only 48 actually useful */ + else + try = 32; /* Only 24 actually useful */ + + tmp = (char *)fd_dma_mem_alloc(1024 * try); + if (!tmp && !floppy_track_buffer) { + try >>= 1; /* buffer only one side */ + INFBOUND(try, 16); + tmp = (char *)fd_dma_mem_alloc(1024 * try); + } + if (!tmp && !floppy_track_buffer) { + fallback_on_nodma_alloc(&tmp, 2048 * try); + } + if (!tmp && !floppy_track_buffer) { + DPRINT("Unable to allocate DMA memory\n"); + goto out; + } + if (floppy_track_buffer) { + if (tmp) + fd_dma_mem_free((unsigned long)tmp, try * 1024); + } else { + buffer_min = buffer_max = -1; + floppy_track_buffer = tmp; + max_buffer_sectors = try; + } + } + + UDRS->fd_device = iminor(inode); + set_capacity(disks[drive], floppy_sizes[iminor(inode)]); + if (old_dev != -1 && old_dev != iminor(inode)) { + if (buffer_drive == drive) + buffer_track = -1; + } + + /* Allow ioctls if we have write-permissions even if read-only open. + * Needed so that programs such as fdrawcmd still can work on write + * protected disks */ + if (filp->f_mode & 2 + || permission(filp->f_dentry->d_inode, 2, NULL) == 0) + filp->private_data = (void *)8; + + if (UFDCS->rawcmd == 1) + UFDCS->rawcmd = 2; + + if (!(filp->f_flags & O_NDELAY)) { + if (filp->f_mode & 3) { + UDRS->last_checked = 0; + check_disk_change(inode->i_bdev); + if (UTESTF(FD_DISK_CHANGED)) + goto out; + } + res = -EROFS; + if ((filp->f_mode & 2) && !(UTESTF(FD_DISK_WRITABLE))) + goto out; + } + up(&open_lock); + return 0; +out: + if (UDRS->fd_ref < 0) + UDRS->fd_ref = 0; + else + UDRS->fd_ref--; + if (!UDRS->fd_ref) + opened_bdev[drive] = NULL; + floppy_release_irq_and_dma(); +out2: + up(&open_lock); + return res; +} + +/* + * Check if the disk has been changed or if a change has been faked. + */ +static int check_floppy_change(struct gendisk *disk) +{ + int drive = (long)disk->private_data; + + if (UTESTF(FD_DISK_CHANGED) || UTESTF(FD_VERIFY)) + return 1; + + if (UDP->checkfreq < (int)(jiffies - UDRS->last_checked)) { + if (floppy_grab_irq_and_dma()) { + return 1; + } + + lock_fdc(drive, 0); + poll_drive(0, 0); + process_fd_request(); + floppy_release_irq_and_dma(); + } + + if (UTESTF(FD_DISK_CHANGED) || + UTESTF(FD_VERIFY) || + test_bit(drive, &fake_change) || + (!ITYPE(UDRS->fd_device) && !current_type[drive])) + return 1; + return 0; +} + +/* + * This implements "read block 0" for floppy_revalidate(). + * Needed for format autodetection, checking whether there is + * a disk in the drive, and whether that disk is writable. + */ + +static int floppy_rb0_complete(struct bio *bio, unsigned int bytes_done, + int err) +{ + if (bio->bi_size) + return 1; + + complete((struct completion *)bio->bi_private); + return 0; +} + +static int __floppy_read_block_0(struct block_device *bdev) +{ + struct bio bio; + struct bio_vec bio_vec; + struct completion complete; + struct page *page; + size_t size; + + page = alloc_page(GFP_NOIO); + if (!page) { + process_fd_request(); + return -ENOMEM; + } + + size = bdev->bd_block_size; + if (!size) + size = 1024; + + bio_init(&bio); + bio.bi_io_vec = &bio_vec; + bio_vec.bv_page = page; + bio_vec.bv_len = size; + bio_vec.bv_offset = 0; + bio.bi_vcnt = 1; + bio.bi_idx = 0; + bio.bi_size = size; + bio.bi_bdev = bdev; + bio.bi_sector = 0; + init_completion(&complete); + bio.bi_private = &complete; + bio.bi_end_io = floppy_rb0_complete; + + submit_bio(READ, &bio); + generic_unplug_device(bdev_get_queue(bdev)); + process_fd_request(); + wait_for_completion(&complete); + + __free_page(page); + + return 0; +} + +/* revalidate the floppy disk, i.e. trigger format autodetection by reading + * the bootblock (block 0). "Autodetection" is also needed to check whether + * there is a disk in the drive at all... Thus we also do it for fixed + * geometry formats */ +static int floppy_revalidate(struct gendisk *disk) +{ + int drive = (long)disk->private_data; +#define NO_GEOM (!current_type[drive] && !ITYPE(UDRS->fd_device)) + int cf; + int res = 0; + + if (UTESTF(FD_DISK_CHANGED) || + UTESTF(FD_VERIFY) || test_bit(drive, &fake_change) || NO_GEOM) { + if (usage_count == 0) { + printk("VFS: revalidate called on non-open device.\n"); + return -EFAULT; + } + lock_fdc(drive, 0); + cf = UTESTF(FD_DISK_CHANGED) || UTESTF(FD_VERIFY); + if (!(cf || test_bit(drive, &fake_change) || NO_GEOM)) { + process_fd_request(); /*already done by another thread */ + return 0; + } + UDRS->maxblock = 0; + UDRS->maxtrack = 0; + if (buffer_drive == drive) + buffer_track = -1; + clear_bit(drive, &fake_change); + UCLEARF(FD_DISK_CHANGED); + if (cf) + UDRS->generation++; + if (NO_GEOM) { + /* auto-sensing */ + res = __floppy_read_block_0(opened_bdev[drive]); + } else { + if (cf) + poll_drive(0, FD_RAW_NEED_DISK); + process_fd_request(); + } + } + set_capacity(disk, floppy_sizes[UDRS->fd_device]); + return res; +} + +static struct block_device_operations floppy_fops = { + .owner = THIS_MODULE, + .open = floppy_open, + .release = floppy_release, + .ioctl = fd_ioctl, + .media_changed = check_floppy_change, + .revalidate_disk = floppy_revalidate, +}; +static char *table[] = { + "", "d360", "h1200", "u360", "u720", "h360", "h720", + "u1440", "u2880", "CompaQ", "h1440", "u1680", "h410", + "u820", "h1476", "u1722", "h420", "u830", "h1494", "u1743", + "h880", "u1040", "u1120", "h1600", "u1760", "u1920", + "u3200", "u3520", "u3840", "u1840", "u800", "u1600", + NULL +}; +static int t360[] = { 1, 0 }, + t1200[] = { 2, 5, 6, 10, 12, 14, 16, 18, 20, 23, 0 }, + t3in[] = { 8, 9, 26, 27, 28, 7, 11, 15, 19, 24, 25, 29, 31, 3, 4, 13, + 17, 21, 22, 30, 0 }; +static int *table_sup[] = + { NULL, t360, t1200, t3in + 5 + 8, t3in + 5, t3in, t3in }; + +static void __init register_devfs_entries(int drive) +{ + int base_minor = (drive < 4) ? drive : (124 + drive); + + if (UDP->cmos < NUMBER(default_drive_params)) { + int i = 0; + do { + int minor = base_minor + (table_sup[UDP->cmos][i] << 2); + + devfs_mk_bdev(MKDEV(FLOPPY_MAJOR, minor), + S_IFBLK | S_IRUSR | S_IWUSR | S_IRGRP | + S_IWGRP, "floppy/%d%s", drive, + table[table_sup[UDP->cmos][i]]); + } while (table_sup[UDP->cmos][i++]); + } +} + +/* + * Floppy Driver initialization + * ============================= + */ + +/* Determine the floppy disk controller type */ +/* This routine was written by David C. Niemi */ +static char __init get_fdc_version(void) +{ + int r; + + output_byte(FD_DUMPREGS); /* 82072 and better know DUMPREGS */ + if (FDCS->reset) + return FDC_NONE; + if ((r = result()) <= 0x00) + return FDC_NONE; /* No FDC present ??? */ + if ((r == 1) && (reply_buffer[0] == 0x80)) { + printk(KERN_INFO "FDC %d is an 8272A\n", fdc); + return FDC_8272A; /* 8272a/765 don't know DUMPREGS */ + } + if (r != 10) { + printk + ("FDC %d init: DUMPREGS: unexpected return of %d bytes.\n", + fdc, r); + return FDC_UNKNOWN; + } + + if (!fdc_configure()) { + printk(KERN_INFO "FDC %d is an 82072\n", fdc); + return FDC_82072; /* 82072 doesn't know CONFIGURE */ + } + + output_byte(FD_PERPENDICULAR); + if (need_more_output() == MORE_OUTPUT) { + output_byte(0); + } else { + printk(KERN_INFO "FDC %d is an 82072A\n", fdc); + return FDC_82072A; /* 82072A as found on Sparcs. */ + } + + output_byte(FD_UNLOCK); + r = result(); + if ((r == 1) && (reply_buffer[0] == 0x80)) { + printk(KERN_INFO "FDC %d is a pre-1991 82077\n", fdc); + return FDC_82077_ORIG; /* Pre-1991 82077, doesn't know + * LOCK/UNLOCK */ + } + if ((r != 1) || (reply_buffer[0] != 0x00)) { + printk("FDC %d init: UNLOCK: unexpected return of %d bytes.\n", + fdc, r); + return FDC_UNKNOWN; + } + output_byte(FD_PARTID); + r = result(); + if (r != 1) { + printk("FDC %d init: PARTID: unexpected return of %d bytes.\n", + fdc, r); + return FDC_UNKNOWN; + } + if (reply_buffer[0] == 0x80) { + printk(KERN_INFO "FDC %d is a post-1991 82077\n", fdc); + return FDC_82077; /* Revised 82077AA passes all the tests */ + } + switch (reply_buffer[0] >> 5) { + case 0x0: + /* Either a 82078-1 or a 82078SL running at 5Volt */ + printk(KERN_INFO "FDC %d is an 82078.\n", fdc); + return FDC_82078; + case 0x1: + printk(KERN_INFO "FDC %d is a 44pin 82078\n", fdc); + return FDC_82078; + case 0x2: + printk(KERN_INFO "FDC %d is a S82078B\n", fdc); + return FDC_S82078B; + case 0x3: + printk(KERN_INFO "FDC %d is a National Semiconductor PC87306\n", + fdc); + return FDC_87306; + default: + printk(KERN_INFO + "FDC %d init: 82078 variant with unknown PARTID=%d.\n", + fdc, reply_buffer[0] >> 5); + return FDC_82078_UNKN; + } +} /* get_fdc_version */ + +/* lilo configuration */ + +static void __init floppy_set_flags(int *ints, int param, int param2) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(default_drive_params); i++) { + if (param) + default_drive_params[i].params.flags |= param2; + else + default_drive_params[i].params.flags &= ~param2; + } + DPRINT("%s flag 0x%x\n", param2 ? "Setting" : "Clearing", param); +} + +static void __init daring(int *ints, int param, int param2) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(default_drive_params); i++) { + if (param) { + default_drive_params[i].params.select_delay = 0; + default_drive_params[i].params.flags |= + FD_SILENT_DCL_CLEAR; + } else { + default_drive_params[i].params.select_delay = + 2 * HZ / 100; + default_drive_params[i].params.flags &= + ~FD_SILENT_DCL_CLEAR; + } + } + DPRINT("Assuming %s floppy hardware\n", param ? "standard" : "broken"); +} + +static void __init set_cmos(int *ints, int dummy, int dummy2) +{ + int current_drive = 0; + + if (ints[0] != 2) { + DPRINT("wrong number of parameters for CMOS\n"); + return; + } + current_drive = ints[1]; + if (current_drive < 0 || current_drive >= 8) { + DPRINT("bad drive for set_cmos\n"); + return; + } +#if N_FDC > 1 + if (current_drive >= 4 && !FDC2) + FDC2 = 0x370; +#endif + DP->cmos = ints[2]; + DPRINT("setting CMOS code to %d\n", ints[2]); +} + +static struct param_table { + const char *name; + void (*fn) (int *ints, int param, int param2); + int *var; + int def_param; + int param2; +} config_params[] __initdata = { + {"allowed_drive_mask", NULL, &allowed_drive_mask, 0xff, 0}, /* obsolete */ + {"all_drives", NULL, &allowed_drive_mask, 0xff, 0}, /* obsolete */ + {"asus_pci", NULL, &allowed_drive_mask, 0x33, 0}, + {"irq", NULL, &FLOPPY_IRQ, 6, 0}, + {"dma", NULL, &FLOPPY_DMA, 2, 0}, + {"daring", daring, NULL, 1, 0}, +#if N_FDC > 1 + {"two_fdc", NULL, &FDC2, 0x370, 0}, + {"one_fdc", NULL, &FDC2, 0, 0}, +#endif + {"thinkpad", floppy_set_flags, NULL, 1, FD_INVERTED_DCL}, + {"broken_dcl", floppy_set_flags, NULL, 1, FD_BROKEN_DCL}, + {"messages", floppy_set_flags, NULL, 1, FTD_MSG}, + {"silent_dcl_clear", floppy_set_flags, NULL, 1, FD_SILENT_DCL_CLEAR}, + {"debug", floppy_set_flags, NULL, 1, FD_DEBUG}, + {"nodma", NULL, &can_use_virtual_dma, 1, 0}, + {"omnibook", NULL, &can_use_virtual_dma, 1, 0}, + {"yesdma", NULL, &can_use_virtual_dma, 0, 0}, + {"fifo_depth", NULL, &fifo_depth, 0xa, 0}, + {"nofifo", NULL, &no_fifo, 0x20, 0}, + {"usefifo", NULL, &no_fifo, 0, 0}, + {"cmos", set_cmos, NULL, 0, 0}, + {"slow", NULL, &slow_floppy, 1, 0}, + {"unexpected_interrupts", NULL, &print_unex, 1, 0}, + {"no_unexpected_interrupts", NULL, &print_unex, 0, 0}, + {"L40SX", NULL, &print_unex, 0, 0} + + EXTRA_FLOPPY_PARAMS +}; + +static int __init floppy_setup(char *str) +{ + int i; + int param; + int ints[11]; + + str = get_options(str, ARRAY_SIZE(ints), ints); + if (str) { + for (i = 0; i < ARRAY_SIZE(config_params); i++) { + if (strcmp(str, config_params[i].name) == 0) { + if (ints[0]) + param = ints[1]; + else + param = config_params[i].def_param; + if (config_params[i].fn) + config_params[i]. + fn(ints, param, + config_params[i].param2); + if (config_params[i].var) { + DPRINT("%s=%d\n", str, param); + *config_params[i].var = param; + } + return 1; + } + } + } + if (str) { + DPRINT("unknown floppy option [%s]\n", str); + + DPRINT("allowed options are:"); + for (i = 0; i < ARRAY_SIZE(config_params); i++) + printk(" %s", config_params[i].name); + printk("\n"); + } else + DPRINT("botched floppy option\n"); + DPRINT("Read Documentation/floppy.txt\n"); + return 0; +} + +static int have_no_fdc = -ENODEV; + +static void floppy_device_release(struct device *dev) +{ + complete(&device_release); +} + +static struct platform_device floppy_device = { + .name = "floppy", + .id = 0, + .dev = { + .release = floppy_device_release, + } +}; + +static struct kobject *floppy_find(dev_t dev, int *part, void *data) +{ + int drive = (*part & 3) | ((*part & 0x80) >> 5); + if (drive >= N_DRIVE || + !(allowed_drive_mask & (1 << drive)) || + fdc_state[FDC(drive)].version == FDC_NONE) + return NULL; + if (((*part >> 2) & 0x1f) >= NUMBER(floppy_type)) + return NULL; + *part = 0; + return get_disk(disks[drive]); +} + +static int __init floppy_init(void) +{ + int i, unit, drive; + int err, dr; + + raw_cmd = NULL; + + for (dr = 0; dr < N_DRIVE; dr++) { + disks[dr] = alloc_disk(1); + if (!disks[dr]) { + err = -ENOMEM; + goto out_put_disk; + } + + disks[dr]->major = FLOPPY_MAJOR; + disks[dr]->first_minor = TOMINOR(dr); + disks[dr]->fops = &floppy_fops; + sprintf(disks[dr]->disk_name, "fd%d", dr); + + init_timer(&motor_off_timer[dr]); + motor_off_timer[dr].data = dr; + motor_off_timer[dr].function = motor_off_callback; + } + + devfs_mk_dir("floppy"); + + err = register_blkdev(FLOPPY_MAJOR, "fd"); + if (err) + goto out_devfs_remove; + + floppy_queue = blk_init_queue(do_fd_request, &floppy_lock); + if (!floppy_queue) { + err = -ENOMEM; + goto out_unreg_blkdev; + } + blk_queue_max_sectors(floppy_queue, 64); + + blk_register_region(MKDEV(FLOPPY_MAJOR, 0), 256, THIS_MODULE, + floppy_find, NULL, NULL); + + for (i = 0; i < 256; i++) + if (ITYPE(i)) + floppy_sizes[i] = floppy_type[ITYPE(i)].size; + else + floppy_sizes[i] = MAX_DISK_SIZE << 1; + + reschedule_timeout(MAXTIMEOUT, "floppy init", MAXTIMEOUT); + config_types(); + + for (i = 0; i < N_FDC; i++) { + fdc = i; + CLEARSTRUCT(FDCS); + FDCS->dtr = -1; + FDCS->dor = 0x4; +#if defined(__sparc__) || defined(__mc68000__) + /*sparcs/sun3x don't have a DOR reset which we can fall back on to */ +#ifdef __mc68000__ + if (MACH_IS_SUN3X) +#endif + FDCS->version = FDC_82072A; +#endif + } + + use_virtual_dma = can_use_virtual_dma & 1; +#if defined(CONFIG_PPC64) + if (check_legacy_ioport(FDC1)) { + del_timer(&fd_timeout); + err = -ENODEV; + goto out_unreg_region; + } +#endif + fdc_state[0].address = FDC1; + if (fdc_state[0].address == -1) { + del_timer(&fd_timeout); + err = -ENODEV; + goto out_unreg_region; + } +#if N_FDC > 1 + fdc_state[1].address = FDC2; +#endif + + fdc = 0; /* reset fdc in case of unexpected interrupt */ + err = floppy_grab_irq_and_dma(); + if (err) { + del_timer(&fd_timeout); + err = -EBUSY; + goto out_unreg_region; + } + + /* initialise drive state */ + for (drive = 0; drive < N_DRIVE; drive++) { + CLEARSTRUCT(UDRS); + CLEARSTRUCT(UDRWE); + USETF(FD_DISK_NEWCHANGE); + USETF(FD_DISK_CHANGED); + USETF(FD_VERIFY); + UDRS->fd_device = -1; + floppy_track_buffer = NULL; + max_buffer_sectors = 0; + } + /* + * Small 10 msec delay to let through any interrupt that + * initialization might have triggered, to not + * confuse detection: + */ + msleep(10); + + for (i = 0; i < N_FDC; i++) { + fdc = i; + FDCS->driver_version = FD_DRIVER_VERSION; + for (unit = 0; unit < 4; unit++) + FDCS->track[unit] = 0; + if (FDCS->address == -1) + continue; + FDCS->rawcmd = 2; + if (user_reset_fdc(-1, FD_RESET_ALWAYS, 0)) { + /* free ioports reserved by floppy_grab_irq_and_dma() */ + release_region(FDCS->address + 2, 4); + release_region(FDCS->address + 7, 1); + FDCS->address = -1; + FDCS->version = FDC_NONE; + continue; + } + /* Try to determine the floppy controller type */ + FDCS->version = get_fdc_version(); + if (FDCS->version == FDC_NONE) { + /* free ioports reserved by floppy_grab_irq_and_dma() */ + release_region(FDCS->address + 2, 4); + release_region(FDCS->address + 7, 1); + FDCS->address = -1; + continue; + } + if (can_use_virtual_dma == 2 && FDCS->version < FDC_82072A) + can_use_virtual_dma = 0; + + have_no_fdc = 0; + /* Not all FDCs seem to be able to handle the version command + * properly, so force a reset for the standard FDC clones, + * to avoid interrupt garbage. + */ + user_reset_fdc(-1, FD_RESET_ALWAYS, 0); + } + fdc = 0; + del_timer(&fd_timeout); + current_drive = 0; + floppy_release_irq_and_dma(); + initialising = 0; + if (have_no_fdc) { + DPRINT("no floppy controllers found\n"); + err = have_no_fdc; + goto out_flush_work; + } + + err = platform_device_register(&floppy_device); + if (err) + goto out_flush_work; + + for (drive = 0; drive < N_DRIVE; drive++) { + if (!(allowed_drive_mask & (1 << drive))) + continue; + if (fdc_state[FDC(drive)].version == FDC_NONE) + continue; + /* to be cleaned up... */ + disks[drive]->private_data = (void *)(long)drive; + disks[drive]->queue = floppy_queue; + disks[drive]->flags |= GENHD_FL_REMOVABLE; + disks[drive]->driverfs_dev = &floppy_device.dev; + add_disk(disks[drive]); + } + + return 0; + +out_flush_work: + flush_scheduled_work(); + if (usage_count) + floppy_release_irq_and_dma(); +out_unreg_region: + blk_unregister_region(MKDEV(FLOPPY_MAJOR, 0), 256); + blk_cleanup_queue(floppy_queue); +out_unreg_blkdev: + unregister_blkdev(FLOPPY_MAJOR, "fd"); +out_devfs_remove: + devfs_remove("floppy"); +out_put_disk: + while (dr--) { + del_timer(&motor_off_timer[dr]); + put_disk(disks[dr]); + } + return err; +} + +static DEFINE_SPINLOCK(floppy_usage_lock); + +static int floppy_grab_irq_and_dma(void) +{ + unsigned long flags; + + spin_lock_irqsave(&floppy_usage_lock, flags); + if (usage_count++) { + spin_unlock_irqrestore(&floppy_usage_lock, flags); + return 0; + } + spin_unlock_irqrestore(&floppy_usage_lock, flags); + if (fd_request_irq()) { + DPRINT("Unable to grab IRQ%d for the floppy driver\n", + FLOPPY_IRQ); + spin_lock_irqsave(&floppy_usage_lock, flags); + usage_count--; + spin_unlock_irqrestore(&floppy_usage_lock, flags); + return -1; + } + if (fd_request_dma()) { + DPRINT("Unable to grab DMA%d for the floppy driver\n", + FLOPPY_DMA); + fd_free_irq(); + spin_lock_irqsave(&floppy_usage_lock, flags); + usage_count--; + spin_unlock_irqrestore(&floppy_usage_lock, flags); + return -1; + } + + for (fdc = 0; fdc < N_FDC; fdc++) { + if (FDCS->address != -1) { + if (!request_region(FDCS->address + 2, 4, "floppy")) { + DPRINT("Floppy io-port 0x%04lx in use\n", + FDCS->address + 2); + goto cleanup1; + } + if (!request_region(FDCS->address + 7, 1, "floppy DIR")) { + DPRINT("Floppy io-port 0x%04lx in use\n", + FDCS->address + 7); + goto cleanup2; + } + /* address + 6 is reserved, and may be taken by IDE. + * Unfortunately, Adaptec doesn't know this :-(, */ + } + } + for (fdc = 0; fdc < N_FDC; fdc++) { + if (FDCS->address != -1) { + reset_fdc_info(1); + fd_outb(FDCS->dor, FD_DOR); + } + } + fdc = 0; + set_dor(0, ~0, 8); /* avoid immediate interrupt */ + + for (fdc = 0; fdc < N_FDC; fdc++) + if (FDCS->address != -1) + fd_outb(FDCS->dor, FD_DOR); + /* + * The driver will try and free resources and relies on us + * to know if they were allocated or not. + */ + fdc = 0; + irqdma_allocated = 1; + return 0; +cleanup2: + release_region(FDCS->address + 2, 4); +cleanup1: + fd_free_irq(); + fd_free_dma(); + while (--fdc >= 0) { + release_region(FDCS->address + 2, 4); + release_region(FDCS->address + 7, 1); + } + spin_lock_irqsave(&floppy_usage_lock, flags); + usage_count--; + spin_unlock_irqrestore(&floppy_usage_lock, flags); + return -1; +} + +static void floppy_release_irq_and_dma(void) +{ + int old_fdc; +#ifdef FLOPPY_SANITY_CHECK +#ifndef __sparc__ + int drive; +#endif +#endif + long tmpsize; + unsigned long tmpaddr; + unsigned long flags; + + spin_lock_irqsave(&floppy_usage_lock, flags); + if (--usage_count) { + spin_unlock_irqrestore(&floppy_usage_lock, flags); + return; + } + spin_unlock_irqrestore(&floppy_usage_lock, flags); + if (irqdma_allocated) { + fd_disable_dma(); + fd_free_dma(); + fd_free_irq(); + irqdma_allocated = 0; + } + set_dor(0, ~0, 8); +#if N_FDC > 1 + set_dor(1, ~8, 0); +#endif + floppy_enable_hlt(); + + if (floppy_track_buffer && max_buffer_sectors) { + tmpsize = max_buffer_sectors * 1024; + tmpaddr = (unsigned long)floppy_track_buffer; + floppy_track_buffer = NULL; + max_buffer_sectors = 0; + buffer_min = buffer_max = -1; + fd_dma_mem_free(tmpaddr, tmpsize); + } +#ifdef FLOPPY_SANITY_CHECK +#ifndef __sparc__ + for (drive = 0; drive < N_FDC * 4; drive++) + if (timer_pending(motor_off_timer + drive)) + printk("motor off timer %d still active\n", drive); +#endif + + if (timer_pending(&fd_timeout)) + printk("floppy timer still active:%s\n", timeout_message); + if (timer_pending(&fd_timer)) + printk("auxiliary floppy timer still active\n"); + if (floppy_work.pending) + printk("work still pending\n"); +#endif + old_fdc = fdc; + for (fdc = 0; fdc < N_FDC; fdc++) + if (FDCS->address != -1) { + release_region(FDCS->address + 2, 4); + release_region(FDCS->address + 7, 1); + } + fdc = old_fdc; +} + +#ifdef MODULE + +static char *floppy; + +static void unregister_devfs_entries(int drive) +{ + int i; + + if (UDP->cmos < NUMBER(default_drive_params)) { + i = 0; + do { + devfs_remove("floppy/%d%s", drive, + table[table_sup[UDP->cmos][i]]); + } while (table_sup[UDP->cmos][i++]); + } +} + +static void __init parse_floppy_cfg_string(char *cfg) +{ + char *ptr; + + while (*cfg) { + for (ptr = cfg; *cfg && *cfg != ' ' && *cfg != '\t'; cfg++) ; + if (*cfg) { + *cfg = '\0'; + cfg++; + } + if (*ptr) + floppy_setup(ptr); + } +} + +int init_module(void) +{ + if (floppy) + parse_floppy_cfg_string(floppy); + return floppy_init(); +} + +void cleanup_module(void) +{ + int drive; + + init_completion(&device_release); + blk_unregister_region(MKDEV(FLOPPY_MAJOR, 0), 256); + unregister_blkdev(FLOPPY_MAJOR, "fd"); + + for (drive = 0; drive < N_DRIVE; drive++) { + del_timer_sync(&motor_off_timer[drive]); + + if ((allowed_drive_mask & (1 << drive)) && + fdc_state[FDC(drive)].version != FDC_NONE) { + del_gendisk(disks[drive]); + unregister_devfs_entries(drive); + } + put_disk(disks[drive]); + } + platform_device_unregister(&floppy_device); + devfs_remove("floppy"); + + del_timer_sync(&fd_timeout); + del_timer_sync(&fd_timer); + blk_cleanup_queue(floppy_queue); + + if (usage_count) + floppy_release_irq_and_dma(); + + /* eject disk, if any */ + fd_eject(0); + + wait_for_completion(&device_release); +} + +module_param(floppy, charp, 0); +module_param(FLOPPY_IRQ, int, 0); +module_param(FLOPPY_DMA, int, 0); +MODULE_AUTHOR("Alain L. Knaff"); +MODULE_SUPPORTED_DEVICE("fd"); +MODULE_LICENSE("GPL"); + +#else + +__setup("floppy=", floppy_setup); +module_init(floppy_init) +#endif + +MODULE_ALIAS_BLOCKDEV_MAJOR(FLOPPY_MAJOR); -- cgit v1.2.3-70-g09d2