From 3340d739f8e1273abd408c59ad1843ea2ac35566 Mon Sep 17 00:00:00 2001 From: Rajendra Nayak Date: Thu, 10 Apr 2014 11:31:33 -0500 Subject: bus: omap_l3_noc: Add support for discountinous flag mux input numbers On DRA7, unlike on OMAP4 and OMAP5, the flag mux input numbers used to indicate the source of errors are not continous. Have a way in the driver to catch these and WARN the user of the flag mux input thats either undocumented or wrong. In the similar vein, Timeout errors in AM43x can't be cleared per h/w team, neither does it have a STDERRLOG_MAIN to clear the error. Further, the mux bit offset might not even be indexed into our array of known mux input description, in which case we'd have a abort. So, define a static range check for bit description and any definition which has target_name set to NULL (the ones that are not populated or ones that are specifically marked in the case of discontinous input numbers), can handle the same gracefully. Upon occurance of error from such sources, mask it. Otherwise, we'd have an infinite interrupt source without any means to clear it. NOTE: follow on patch ensures that these masked bits are ignored. [nm@ti.com: rebase, squash and improve] Signed-off-by: Rajendra Nayak Signed-off-by: Afzal Mohammed Signed-off-by: Nishanth Menon Acked-by: Santosh Shilimkar Acked-by: Peter Ujfalusi Tested-by: Darren Etheridge Tested-by: Sekhar Nori --- drivers/bus/omap_l3_noc.c | 31 +++++++++++++++++++++++++++++++ drivers/bus/omap_l3_noc.h | 11 ++++++++--- 2 files changed, 39 insertions(+), 3 deletions(-) (limited to 'drivers/bus') diff --git a/drivers/bus/omap_l3_noc.c b/drivers/bus/omap_l3_noc.c index 343f002a06f..7743e86e88b 100644 --- a/drivers/bus/omap_l3_noc.c +++ b/drivers/bus/omap_l3_noc.c @@ -75,10 +75,41 @@ static irqreturn_t l3_interrupt_handler(int irq, void *_l3) if (err_reg) { /* Identify the source from control status register */ err_src = __ffs(err_reg); + + /* We DONOT expect err_src to go out of bounds */ + BUG_ON(err_src > MAX_CLKDM_TARGETS); + l3_targ_inst = &l3_targ[i][err_src]; target_name = l3_targ_inst->name; l3_targ_base = base + l3_targ_inst->offset; + /* + * If we do not know of a register offset to decode + * and clear, then mask. + */ + if (target_name == L3_TARGET_NOT_SUPPORTED) { + u32 mask_val; + void __iomem *mask_reg; + + /* + * Certain plaforms may have "undocumented" + * status pending on boot.. So dont generate + * a severe warning here. + */ + dev_err(l3->dev, + "L3 %s error: target %d mod:%d %s\n", + inttype ? "debug" : "application", + err_src, i, "(unclearable)"); + + mask_reg = base + l3_flagmux[i] + + L3_FLAGMUX_MASK0 + (inttype << 3); + mask_val = readl_relaxed(mask_reg); + mask_val &= ~(1 << err_src); + writel_relaxed(mask_val, mask_reg); + + break; + } + /* Read the stderrlog_main_source from clk domain */ l3_targ_stderr = l3_targ_base + L3_TARG_STDERRLOG_MAIN; l3_targ_slvofslsb = l3_targ_base + diff --git a/drivers/bus/omap_l3_noc.h b/drivers/bus/omap_l3_noc.h index ae2878464ef..66caeceaf12 100644 --- a/drivers/bus/omap_l3_noc.h +++ b/drivers/bus/omap_l3_noc.h @@ -30,6 +30,11 @@ #define L3_TARG_STDERRLOG_SLVOFSLSB 0x5c #define L3_TARG_STDERRLOG_MSTADDR 0x68 #define L3_FLAGMUX_REGERR0 0xc +#define L3_FLAGMUX_MASK0 0x8 + +#define L3_TARGET_NOT_SUPPORTED NULL + +#define MAX_CLKDM_TARGETS 31 #define NUM_OF_L3_MASTERS (sizeof(l3_masters)/sizeof(l3_masters[0])) @@ -61,7 +66,7 @@ static u32 l3_flagmux[L3_MODULES] = { 0X0200 }; -static struct l3_target_data l3_target_inst_data_clk1[] = { +static struct l3_target_data l3_target_inst_data_clk1[MAX_CLKDM_TARGETS] = { {0x100, "DMM1",}, {0x200, "DMM2",}, {0x300, "ABE",}, @@ -71,7 +76,7 @@ static struct l3_target_data l3_target_inst_data_clk1[] = { {0x900, "L4WAKEUP",}, }; -static struct l3_target_data l3_target_inst_data_clk2[] = { +static struct l3_target_data l3_target_inst_data_clk2[MAX_CLKDM_TARGETS] = { {0x500, "CORTEXM3",}, {0x300, "DSS",}, {0x100, "GPMC",}, @@ -95,7 +100,7 @@ static struct l3_target_data l3_target_inst_data_clk2[] = { {0x1700, "LLI",}, }; -static struct l3_target_data l3_target_inst_data_clk3[] = { +static struct l3_target_data l3_target_inst_data_clk3[MAX_CLKDM_TARGETS] = { {0x0100, "EMUSS",}, {0x0300, "DEBUG SOURCE",}, {0x0, "HOST CLK3",}, -- cgit v1.2.3-70-g09d2