From 87e392164ab6c0f3f055f8483dc7dc3f1afa19ad Mon Sep 17 00:00:00 2001 From: Mike Turquette Date: Wed, 27 Aug 2014 15:36:37 -0700 Subject: clk: mvebu: share locks between gate clocks Refactor mvebu_clk_gating_setup() to use a common spinlock instead of a unique lock for every instance of a struct clk_gating_ctrl object. This will be used later for a separate mux clock type that shares a register with gate clock types and needs to use the same lock to protect access to the register. Cc: Andrew Lunn Tested-by: Andrew Lunn Signed-off-by: Mike Turquette --- drivers/clk/mvebu/common.c | 9 ++++++--- drivers/clk/mvebu/common.h | 2 ++ 2 files changed, 8 insertions(+), 3 deletions(-) (limited to 'drivers/clk') diff --git a/drivers/clk/mvebu/common.c b/drivers/clk/mvebu/common.c index 25ceccf939a..8145c4efc38 100644 --- a/drivers/clk/mvebu/common.c +++ b/drivers/clk/mvebu/common.c @@ -89,8 +89,10 @@ void __init mvebu_coreclk_setup(struct device_node *np, * Clock Gating Control */ +DEFINE_SPINLOCK(ctrl_gating_lock); + struct clk_gating_ctrl { - spinlock_t lock; + spinlock_t *lock; struct clk **gates; int num_gates; }; @@ -138,7 +140,8 @@ void __init mvebu_clk_gating_setup(struct device_node *np, if (WARN_ON(!ctrl)) goto ctrl_out; - spin_lock_init(&ctrl->lock); + /* lock must already be initialized */ + ctrl->lock = &ctrl_gating_lock; /* Count, allocate, and register clock gates */ for (n = 0; desc[n].name;) @@ -155,7 +158,7 @@ void __init mvebu_clk_gating_setup(struct device_node *np, (desc[n].parent) ? desc[n].parent : default_parent; ctrl->gates[n] = clk_register_gate(NULL, desc[n].name, parent, desc[n].flags, base, desc[n].bit_idx, - 0, &ctrl->lock); + 0, ctrl->lock); WARN_ON(IS_ERR(ctrl->gates[n])); } diff --git a/drivers/clk/mvebu/common.h b/drivers/clk/mvebu/common.h index f968b4d9df9..8cd28e47471 100644 --- a/drivers/clk/mvebu/common.h +++ b/drivers/clk/mvebu/common.h @@ -17,6 +17,8 @@ #include +extern spinlock_t ctrl_gating_lock; + struct device_node; struct coreclk_ratio { -- cgit v1.2.3-70-g09d2 From e8e8a9b0d86c093b208789fd71501c91a919ffdb Mon Sep 17 00:00:00 2001 From: Mike Turquette Date: Wed, 27 Aug 2014 17:11:38 -0700 Subject: clk: mvebu: powersave clock is a multiplexer Kirkwood is unique among the mvebu SoCs for having a clock multiplexer that feeds into the cpu. This multiplexer can select either the cpu pll or the ddr clock as its input signal, allowing for a choice between performance and power savings. This patch introduces the code needed to register the clock multiplexer on Kirkwood SoCs but does not include the clock data to actually register the clock. That will be done in a follow-up patch which is necessary to prevent breaking git bisect. Cc: Tomeu Vizoso Tested-by: Andrew Lunn Signed-off-by: Mike Turquette --- drivers/clk/mvebu/kirkwood.c | 87 ++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 87 insertions(+) (limited to 'drivers/clk') diff --git a/drivers/clk/mvebu/kirkwood.c b/drivers/clk/mvebu/kirkwood.c index ddb666a8650..f73a2fa8a56 100644 --- a/drivers/clk/mvebu/kirkwood.c +++ b/drivers/clk/mvebu/kirkwood.c @@ -13,9 +13,11 @@ */ #include +#include #include #include #include +#include #include "common.h" /* @@ -225,6 +227,91 @@ static const struct clk_gating_soc_desc kirkwood_gating_desc[] __initconst = { { } }; + +/* + * Clock Muxing Control + */ + +struct clk_muxing_soc_desc { + const char *name; + const char **parents; + int num_parents; + int shift; + int width; + unsigned long flags; +}; + +struct clk_muxing_ctrl { + spinlock_t *lock; + struct clk **muxes; + int num_muxes; +}; + +#define to_clk_mux(_hw) container_of(_hw, struct clk_mux, hw) + +static struct clk *clk_muxing_get_src( + struct of_phandle_args *clkspec, void *data) +{ + struct clk_muxing_ctrl *ctrl = (struct clk_muxing_ctrl *)data; + int n; + + if (clkspec->args_count < 1) + return ERR_PTR(-EINVAL); + + for (n = 0; n < ctrl->num_muxes; n++) { + struct clk_mux *mux = + to_clk_mux(__clk_get_hw(ctrl->muxes[n])); + if (clkspec->args[0] == mux->shift) + return ctrl->muxes[n]; + } + return ERR_PTR(-ENODEV); +} + +static void __init kirkwood_clk_muxing_setup(struct device_node *np, + const struct clk_muxing_soc_desc *desc) +{ + struct clk_muxing_ctrl *ctrl; + void __iomem *base; + int n; + + base = of_iomap(np, 0); + if (WARN_ON(!base)) + return; + + ctrl = kzalloc(sizeof(*ctrl), GFP_KERNEL); + if (WARN_ON(!ctrl)) + goto ctrl_out; + + /* lock must already be initialized */ + ctrl->lock = &ctrl_gating_lock; + + /* Count, allocate, and register clock muxes */ + for (n = 0; desc[n].name;) + n++; + + ctrl->num_muxes = n; + ctrl->muxes = kcalloc(ctrl->num_muxes, sizeof(struct clk *), + GFP_KERNEL); + if (WARN_ON(!ctrl->muxes)) + goto muxes_out; + + for (n = 0; n < ctrl->num_muxes; n++) { + ctrl->muxes[n] = clk_register_mux(NULL, desc[n].name, + desc[n].parents, desc[n].num_parents, + desc[n].flags, base, desc[n].shift, + desc[n].width, desc[n].flags, ctrl->lock); + WARN_ON(IS_ERR(ctrl->muxes[n])); + } + + of_clk_add_provider(np, clk_muxing_get_src, ctrl); + + return; +muxes_out: + kfree(ctrl); +ctrl_out: + iounmap(base); +} + static void __init kirkwood_clk_init(struct device_node *np) { struct device_node *cgnp = -- cgit v1.2.3-70-g09d2 From 105299381d8720a3afd4252689ae8551f49944be Mon Sep 17 00:00:00 2001 From: Mike Turquette Date: Mon, 18 Aug 2014 17:30:29 +0200 Subject: cpufreq: kirkwood: use the powersave multiplexer The powersave clock acts like a multiplexer for the cpu, selecting either the clock signal derived from the cpu pll or from the ddr clock. This patch changes powersave from a gate clock to a mux clock to better reflect this behavior. This is a cleaner approach whereby the frequency of the cpu always matches the rate of powersave_clk. The cpufreq driver for the kirkwood platform no longer must parse this behavior out of various calls to clk_enable and clk_disable, but can instead simply select the parent cpu it wants when changing rate. Likewise when requesting the cpu rate we need only query powersave_clk's rate through the usual call to clk_get_rate. The new clock data and corresponding changes to the cpufreq driver are combined into this single commit to avoid a git bisect issue where this cpufreq driver fails to work properly between the commit that updates the kirkwood clock driver and the commit that changes how the cpufreq driver uses that clock. Cc: Tomeu Vizoso Cc: Rafael J. Wysocki Tested-by: Andrew Lunn Acked-by: Viresh Kumar Signed-off-by: Mike Turquette --- drivers/clk/mvebu/kirkwood.c | 15 +++++++++++++-- drivers/cpufreq/kirkwood-cpufreq.c | 14 +++++--------- 2 files changed, 18 insertions(+), 11 deletions(-) (limited to 'drivers/clk') diff --git a/drivers/clk/mvebu/kirkwood.c b/drivers/clk/mvebu/kirkwood.c index f73a2fa8a56..99550f25975 100644 --- a/drivers/clk/mvebu/kirkwood.c +++ b/drivers/clk/mvebu/kirkwood.c @@ -216,7 +216,6 @@ static const struct clk_gating_soc_desc kirkwood_gating_desc[] __initconst = { { "runit", NULL, 7, 0 }, { "xor0", NULL, 8, 0 }, { "audio", NULL, 9, 0 }, - { "powersave", "cpuclk", 11, 0 }, { "sata0", NULL, 14, 0 }, { "sata1", NULL, 15, 0 }, { "xor1", NULL, 16, 0 }, @@ -247,6 +246,16 @@ struct clk_muxing_ctrl { int num_muxes; }; +static const char *powersave_parents[] = { + "cpuclk", + "ddrclk", +}; + +static const struct clk_muxing_soc_desc kirkwood_mux_desc[] __initconst = { + { "powersave", powersave_parents, ARRAY_SIZE(powersave_parents), + 11, 1, 0 }, +}; + #define to_clk_mux(_hw) container_of(_hw, struct clk_mux, hw) static struct clk *clk_muxing_get_src( @@ -323,8 +332,10 @@ static void __init kirkwood_clk_init(struct device_node *np) else mvebu_coreclk_setup(np, &kirkwood_coreclks); - if (cgnp) + if (cgnp) { mvebu_clk_gating_setup(cgnp, kirkwood_gating_desc); + kirkwood_clk_muxing_setup(cgnp, kirkwood_mux_desc); + } } CLK_OF_DECLARE(kirkwood_clk, "marvell,kirkwood-core-clock", kirkwood_clk_init); diff --git a/drivers/cpufreq/kirkwood-cpufreq.c b/drivers/cpufreq/kirkwood-cpufreq.c index 37a480680cd..7906d4acfe4 100644 --- a/drivers/cpufreq/kirkwood-cpufreq.c +++ b/drivers/cpufreq/kirkwood-cpufreq.c @@ -12,7 +12,6 @@ #include #include #include -#include #include #include #include @@ -39,8 +38,7 @@ static struct priv * - cpu clk * - ddr clk * - * The frequencies are set at runtime before registering this * - * table. + * The frequencies are set at runtime before registering this table. */ static struct cpufreq_frequency_table kirkwood_freq_table[] = { {0, STATE_CPU_FREQ, 0}, /* CPU uses cpuclk */ @@ -50,9 +48,7 @@ static struct cpufreq_frequency_table kirkwood_freq_table[] = { static unsigned int kirkwood_cpufreq_get_cpu_frequency(unsigned int cpu) { - if (__clk_is_enabled(priv.powersave_clk)) - return kirkwood_freq_table[1].frequency; - return kirkwood_freq_table[0].frequency; + return clk_get_rate(priv.powersave_clk) / 1000; } static int kirkwood_cpufreq_target(struct cpufreq_policy *policy, @@ -70,10 +66,10 @@ static int kirkwood_cpufreq_target(struct cpufreq_policy *policy, switch (state) { case STATE_CPU_FREQ: - clk_disable(priv.powersave_clk); + clk_set_parent(priv.powersave_clk, priv.cpu_clk); break; case STATE_DDR_FREQ: - clk_enable(priv.powersave_clk); + clk_set_parent(priv.powersave_clk, priv.ddr_clk); break; } @@ -150,7 +146,7 @@ static int kirkwood_cpufreq_probe(struct platform_device *pdev) err = PTR_ERR(priv.powersave_clk); goto out_ddr; } - clk_prepare(priv.powersave_clk); + clk_prepare_enable(priv.powersave_clk); of_node_put(np); np = NULL; -- cgit v1.2.3-70-g09d2 From 4abe240878db394b399a12a63f01324bcd65c547 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Wed, 6 Aug 2014 10:24:00 +0900 Subject: clk: shmobile: add missing 0x0100 for SDCKCR 10cdfe9f327ab8d120cf6957e58c6203e3a53847 (clk: shmobile: Add R-Car Gen2 clocks support) added R-Car Gen2 clock support via DT for v3.14. But, cpg_sd01_div_table is missing "0x0100: x 1/8" division ratio. This patch fixes hidden bug. It is based on R-Car H2 v0.7, R-Car M2 v0.9. Acked-by: Geert Uytterhoeven Acked-by: Laurent Pinchart Acked-by: Simon Horman Reported-by: Yusuke Goda Signed-off-by: Kuninori Morimoto Signed-off-by: Mike Turquette --- drivers/clk/shmobile/clk-rcar-gen2.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/clk') diff --git a/drivers/clk/shmobile/clk-rcar-gen2.c b/drivers/clk/shmobile/clk-rcar-gen2.c index dff7f79a19b..e996425d06a 100644 --- a/drivers/clk/shmobile/clk-rcar-gen2.c +++ b/drivers/clk/shmobile/clk-rcar-gen2.c @@ -202,6 +202,7 @@ static const struct clk_div_table cpg_sdh_div_table[] = { }; static const struct clk_div_table cpg_sd01_div_table[] = { + { 4, 8 }, { 5, 12 }, { 6, 16 }, { 7, 18 }, { 8, 24 }, { 10, 36 }, { 11, 48 }, { 12, 10 }, { 0, 0 }, }; -- cgit v1.2.3-70-g09d2 From b2155a71a7ff828eac72367ff9c2a0a2f4fec35b Mon Sep 17 00:00:00 2001 From: Heiko Stübner Date: Wed, 27 Aug 2014 00:54:21 +0200 Subject: clk: rockchip: implement the fraction divider branch type Rockchip SoCs may provide fraction dividers for some clocks, mostly for i2s and uarts. In contrast to the other registers, these do not use the hiword-mask paradigm, but instead split the register into the upper 16 bit for the nominator and the lower 16 bit for the denominator. The common clock framework got a generic fractional divider clock type recently that can accomodate this setting easily. All currently known fraction dividers have a separate gate too, therefore implement the divider as composite using the ops-struct from fractional_divider clock and add the gate if necessary. Signed-off-by: Heiko Stuebner Signed-off-by: Mike Turquette --- drivers/clk/rockchip/clk.c | 58 ++++++++++++++++++++++++++++++++++++++++++++-- 1 file changed, 56 insertions(+), 2 deletions(-) (limited to 'drivers/clk') diff --git a/drivers/clk/rockchip/clk.c b/drivers/clk/rockchip/clk.c index 278cf9dd1e2..5db1ecf95ec 100644 --- a/drivers/clk/rockchip/clk.c +++ b/drivers/clk/rockchip/clk.c @@ -103,6 +103,54 @@ struct clk *rockchip_clk_register_branch(const char *name, return clk; } +static struct clk *rockchip_clk_register_frac_branch(const char *name, + const char **parent_names, u8 num_parents, void __iomem *base, + int muxdiv_offset, u8 div_flags, + int gate_offset, u8 gate_shift, u8 gate_flags, + unsigned long flags, spinlock_t *lock) +{ + struct clk *clk; + struct clk_gate *gate = NULL; + struct clk_fractional_divider *div = NULL; + const struct clk_ops *div_ops = NULL, *gate_ops = NULL; + + if (gate_offset >= 0) { + gate = kzalloc(sizeof(*gate), GFP_KERNEL); + if (!gate) + return ERR_PTR(-ENOMEM); + + gate->flags = gate_flags; + gate->reg = base + gate_offset; + gate->bit_idx = gate_shift; + gate->lock = lock; + gate_ops = &clk_gate_ops; + } + + if (muxdiv_offset < 0) + return ERR_PTR(-EINVAL); + + div = kzalloc(sizeof(*div), GFP_KERNEL); + if (!div) + return ERR_PTR(-ENOMEM); + + div->flags = div_flags; + div->reg = base + muxdiv_offset; + div->mshift = 16; + div->mmask = 0xffff0000; + div->nshift = 0; + div->nmask = 0xffff; + div->lock = lock; + div_ops = &clk_fractional_divider_ops; + + clk = clk_register_composite(NULL, name, parent_names, num_parents, + NULL, NULL, + &div->hw, div_ops, + gate ? &gate->hw : NULL, gate_ops, + flags); + + return clk; +} + static DEFINE_SPINLOCK(clk_lock); static struct clk **clk_table; static void __iomem *reg_base; @@ -197,8 +245,14 @@ void __init rockchip_clk_register_branches( list->div_flags, &clk_lock); break; case branch_fraction_divider: - /* unimplemented */ - continue; + /* keep all gates untouched for now */ + flags |= CLK_IGNORE_UNUSED; + + clk = rockchip_clk_register_frac_branch(list->name, + list->parent_names, list->num_parents, + reg_base, list->muxdiv_offset, list->div_flags, + list->gate_offset, list->gate_shift, + list->gate_flags, flags, &clk_lock); break; case branch_gate: flags |= CLK_SET_RATE_PARENT; -- cgit v1.2.3-70-g09d2 From 1a4b1819950a278e44dd2e28c5cdb7d8b804dd73 Mon Sep 17 00:00:00 2001 From: Heiko Stübner Date: Wed, 27 Aug 2014 00:54:56 +0200 Subject: clk: rockchip: make rockchip_clk_register_branch static It is only used locally in clk/rockchip/clk.c and thus can be static. Signed-off-by: Heiko Stuebner Signed-off-by: Mike Turquette --- drivers/clk/rockchip/clk.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/clk') diff --git a/drivers/clk/rockchip/clk.c b/drivers/clk/rockchip/clk.c index 5db1ecf95ec..5c9abd7bdc6 100644 --- a/drivers/clk/rockchip/clk.c +++ b/drivers/clk/rockchip/clk.c @@ -37,7 +37,7 @@ * * sometimes without one of those components. */ -struct clk *rockchip_clk_register_branch(const char *name, +static struct clk *rockchip_clk_register_branch(const char *name, const char **parent_names, u8 num_parents, void __iomem *base, int muxdiv_offset, u8 mux_shift, u8 mux_width, u8 mux_flags, u8 div_shift, u8 div_width, u8 div_flags, -- cgit v1.2.3-70-g09d2 From fe94f974e9c8b820640a5873d81589ab67380516 Mon Sep 17 00:00:00 2001 From: Heiko Stübner Date: Thu, 14 Aug 2014 23:00:26 +0200 Subject: clk: rockchip: protect critical clocks from getting disabled The clock-tree contains clocks that should never get disabled automatically. One example are the base ACLKs, the base supplies for all peripherals. Therefore add a structure similar to the sunxi clock-tree to protect these special clocks from being disabled. Signed-off-by: Heiko Stuebner Tested-by: Doug Anderson Tested-by: Kever Yang Signed-off-by: Mike Turquette --- drivers/clk/rockchip/clk-rk3188.c | 7 +++++++ drivers/clk/rockchip/clk-rk3288.c | 7 +++++++ drivers/clk/rockchip/clk.c | 13 +++++++++++++ drivers/clk/rockchip/clk.h | 1 + 4 files changed, 28 insertions(+) (limited to 'drivers/clk') diff --git a/drivers/clk/rockchip/clk-rk3188.c b/drivers/clk/rockchip/clk-rk3188.c index a83a6d8d0fb..732118ed55a 100644 --- a/drivers/clk/rockchip/clk-rk3188.c +++ b/drivers/clk/rockchip/clk-rk3188.c @@ -599,6 +599,11 @@ static struct rockchip_clk_branch rk3188_clk_branches[] __initdata = { GATE(ACLK_GPS, "aclk_gps", "aclk_peri", 0, RK2928_CLKGATE_CON(8), 13, GFLAGS), }; +static const char *rk3188_critical_clocks[] __initconst = { + "aclk_cpu", + "aclk_peri", +}; + static void __init rk3188_common_clk_init(struct device_node *np) { void __iomem *reg_base; @@ -628,6 +633,8 @@ static void __init rk3188_common_clk_init(struct device_node *np) RK3188_GRF_SOC_STATUS); rockchip_clk_register_branches(common_clk_branches, ARRAY_SIZE(common_clk_branches)); + rockchip_clk_protect_critical(rk3188_critical_clocks, + ARRAY_SIZE(rk3188_critical_clocks)); rockchip_register_softrst(np, 9, reg_base + RK2928_SOFTRST_CON(0), ROCKCHIP_SOFTRST_HIWORD_MASK); diff --git a/drivers/clk/rockchip/clk-rk3288.c b/drivers/clk/rockchip/clk-rk3288.c index 0d8c6c59a75..038b1aaf8c5 100644 --- a/drivers/clk/rockchip/clk-rk3288.c +++ b/drivers/clk/rockchip/clk-rk3288.c @@ -680,6 +680,11 @@ static struct rockchip_clk_branch rk3288_clk_branches[] __initdata = { GATE(0, "pclk_isp_in", "ext_isp", 0, RK3288_CLKGATE_CON(16), 3, GFLAGS), }; +static const char *rk3288_critical_clocks[] __initconst = { + "aclk_cpu", + "aclk_peri", +}; + static void __init rk3288_clk_init(struct device_node *np) { void __iomem *reg_base; @@ -710,6 +715,8 @@ static void __init rk3288_clk_init(struct device_node *np) RK3288_GRF_SOC_STATUS); rockchip_clk_register_branches(rk3288_clk_branches, ARRAY_SIZE(rk3288_clk_branches)); + rockchip_clk_protect_critical(rk3288_critical_clocks, + ARRAY_SIZE(rk3288_critical_clocks)); rockchip_register_softrst(np, 9, reg_base + RK3288_SOFTRST_CON(0), ROCKCHIP_SOFTRST_HIWORD_MASK); diff --git a/drivers/clk/rockchip/clk.c b/drivers/clk/rockchip/clk.c index 5c9abd7bdc6..d9c6db2151b 100644 --- a/drivers/clk/rockchip/clk.c +++ b/drivers/clk/rockchip/clk.c @@ -296,3 +296,16 @@ void __init rockchip_clk_register_branches( rockchip_clk_add_lookup(clk, list->id); } } + +void __init rockchip_clk_protect_critical(const char *clocks[], int nclocks) +{ + int i; + + /* Protect the clocks that needs to stay on */ + for (i = 0; i < nclocks; i++) { + struct clk *clk = __clk_lookup(clocks[i]); + + if (clk) + clk_prepare_enable(clk); + } +} diff --git a/drivers/clk/rockchip/clk.h b/drivers/clk/rockchip/clk.h index 887cbdeca2a..2b0bca19db4 100644 --- a/drivers/clk/rockchip/clk.h +++ b/drivers/clk/rockchip/clk.h @@ -329,6 +329,7 @@ void rockchip_clk_register_branches(struct rockchip_clk_branch *clk_list, unsigned int nr_clk); void rockchip_clk_register_plls(struct rockchip_pll_clock *pll_list, unsigned int nr_pll, int grf_lock_offset); +void rockchip_clk_protect_critical(const char *clocks[], int nclocks); #define ROCKCHIP_SOFTRST_HIWORD_MASK BIT(0) -- cgit v1.2.3-70-g09d2 From 078a3eb519dacf28cb7c9bb2ad2f62e19ca6dcc2 Mon Sep 17 00:00:00 2001 From: Boris BREZILLON Date: Tue, 2 Sep 2014 09:50:14 +0200 Subject: clk: at91: fix PLL_MAX_COUNT macro definition MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Boris BREZILLON Reported-by: Gaël PORTAY Tested-by: Gaël PORTAY Signed-off-by: Mike Turquette --- drivers/clk/at91/clk-pll.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/clk') diff --git a/drivers/clk/at91/clk-pll.c b/drivers/clk/at91/clk-pll.c index cf6ed023504..7b453b915c7 100644 --- a/drivers/clk/at91/clk-pll.c +++ b/drivers/clk/at91/clk-pll.c @@ -31,7 +31,7 @@ (layout)->mul_mask) #define PLL_ICPR_SHIFT(id) ((id) * 16) #define PLL_ICPR_MASK(id) (0xffff << PLL_ICPR_SHIFT(id)) -#define PLL_MAX_COUNT 0x3ff +#define PLL_MAX_COUNT 0x3f #define PLL_COUNT_SHIFT 8 #define PLL_OUT_SHIFT 14 #define PLL_MAX_ID 1 -- cgit v1.2.3-70-g09d2 From 3ef9dd2bab7d6a013f75f9fb226d0191e9981288 Mon Sep 17 00:00:00 2001 From: Boris BREZILLON Date: Tue, 2 Sep 2014 09:50:15 +0200 Subject: clk: at91: rework PLL rate calculation MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The AT91 PLL rate configuration is done by configuring a multiplier/divider pair. The previous calculation was over-complicated (and apparently buggy). Simplify the implementation and add some comments to explain what is done here. Signed-off-by: Boris BREZILLON Reported-by: Gaël PORTAY Tested-by: Gaël PORTAY Signed-off-by: Mike Turquette --- drivers/clk/at91/clk-pll.c | 147 ++++++++++++++++++++++++--------------------- 1 file changed, 77 insertions(+), 70 deletions(-) (limited to 'drivers/clk') diff --git a/drivers/clk/at91/clk-pll.c b/drivers/clk/at91/clk-pll.c index 7b453b915c7..a1adcf18602 100644 --- a/drivers/clk/at91/clk-pll.c +++ b/drivers/clk/at91/clk-pll.c @@ -15,6 +15,7 @@ #include #include #include +#include #include #include #include @@ -29,6 +30,9 @@ #define PLL_DIV(reg) ((reg) & PLL_DIV_MASK) #define PLL_MUL(reg, layout) (((reg) >> (layout)->mul_shift) & \ (layout)->mul_mask) +#define PLL_MUL_MIN 2 +#define PLL_MUL_MASK(layout) ((layout)->mul_mask) +#define PLL_MUL_MAX(layout) (PLL_MUL_MASK(layout) + 1) #define PLL_ICPR_SHIFT(id) ((id) * 16) #define PLL_ICPR_MASK(id) (0xffff << PLL_ICPR_SHIFT(id)) #define PLL_MAX_COUNT 0x3f @@ -163,99 +167,102 @@ static long clk_pll_get_best_div_mul(struct clk_pll *pll, unsigned long rate, unsigned long parent_rate, u32 *div, u32 *mul, u32 *index) { - unsigned long maxrate; - unsigned long minrate; - unsigned long divrate; - unsigned long bestdiv = 1; - unsigned long bestmul; - unsigned long tmpdiv; - unsigned long roundup; - unsigned long rounddown; - unsigned long remainder; - unsigned long bestremainder; - unsigned long maxmul; - unsigned long maxdiv; - unsigned long mindiv; - int i = 0; const struct clk_pll_layout *layout = pll->layout; const struct clk_pll_characteristics *characteristics = pll->characteristics; + unsigned long bestremainder = ULONG_MAX; + unsigned long maxdiv, mindiv, tmpdiv; + long bestrate = -ERANGE; + unsigned long bestdiv; + unsigned long bestmul; + int i = 0; - /* Minimum divider = 1 */ - /* Maximum multiplier = max_mul */ - maxmul = layout->mul_mask + 1; - maxrate = (parent_rate * maxmul) / 1; - - /* Maximum divider = max_div */ - /* Minimum multiplier = 2 */ - maxdiv = PLL_DIV_MAX; - minrate = (parent_rate * 2) / maxdiv; - + /* Check if parent_rate is a valid input rate */ if (parent_rate < characteristics->input.min || - parent_rate < characteristics->input.max) - return -ERANGE; - - if (parent_rate < minrate || parent_rate > maxrate) + parent_rate > characteristics->input.max) return -ERANGE; - for (i = 0; i < characteristics->num_output; i++) { - if (parent_rate >= characteristics->output[i].min && - parent_rate <= characteristics->output[i].max) - break; - } - - if (i >= characteristics->num_output) - return -ERANGE; - - bestmul = rate / parent_rate; - rounddown = parent_rate % rate; - roundup = rate - rounddown; - bestremainder = roundup < rounddown ? roundup : rounddown; - - if (!bestremainder) { - if (div) - *div = bestdiv; - if (mul) - *mul = bestmul; - if (index) - *index = i; - return rate; - } - - maxdiv = 255 / (bestmul + 1); - if (parent_rate / maxdiv < characteristics->input.min) - maxdiv = parent_rate / characteristics->input.min; - mindiv = parent_rate / characteristics->input.max; - if (parent_rate % characteristics->input.max) - mindiv++; - - for (tmpdiv = mindiv; tmpdiv < maxdiv; tmpdiv++) { - divrate = parent_rate / tmpdiv; - - rounddown = rate % divrate; - roundup = divrate - rounddown; - remainder = roundup < rounddown ? roundup : rounddown; - + /* + * Calculate minimum divider based on the minimum multiplier, the + * parent_rate and the requested rate. + * Should always be 2 according to the input and output characteristics + * of the PLL blocks. + */ + mindiv = (parent_rate * PLL_MUL_MIN) / rate; + if (!mindiv) + mindiv = 1; + + /* + * Calculate the maximum divider which is limited by PLL register + * layout (limited by the MUL or DIV field size). + */ + maxdiv = DIV_ROUND_UP(parent_rate * PLL_MUL_MAX(layout), rate); + if (maxdiv > PLL_DIV_MAX) + maxdiv = PLL_DIV_MAX; + + /* + * Iterate over the acceptable divider values to find the best + * divider/multiplier pair (the one that generates the closest + * rate to the requested one). + */ + for (tmpdiv = mindiv; tmpdiv <= maxdiv; tmpdiv++) { + unsigned long remainder; + unsigned long tmprate; + unsigned long tmpmul; + + /* + * Calculate the multiplier associated with the current + * divider that provide the closest rate to the requested one. + */ + tmpmul = DIV_ROUND_CLOSEST(rate, parent_rate / tmpdiv); + tmprate = (parent_rate / tmpdiv) * tmpmul; + if (tmprate > rate) + remainder = tmprate - rate; + else + remainder = rate - tmprate; + + /* + * Compare the remainder with the best remainder found until + * now and elect a new best multiplier/divider pair if the + * current remainder is smaller than the best one. + */ if (remainder < bestremainder) { bestremainder = remainder; - bestmul = rate / divrate; bestdiv = tmpdiv; + bestmul = tmpmul; + bestrate = tmprate; } + /* + * We've found a perfect match! + * Stop searching now and use this multiplier/divider pair. + */ if (!remainder) break; } - rate = (parent_rate / bestdiv) * bestmul; + /* We haven't found any multiplier/divider pair => return -ERANGE */ + if (bestrate < 0) + return bestrate; + + /* Check if bestrate is a valid output rate */ + for (i = 0; i < characteristics->num_output; i++) { + if (bestrate >= characteristics->output[i].min && + bestrate <= characteristics->output[i].max) + break; + } + + if (i >= characteristics->num_output) + return -ERANGE; if (div) *div = bestdiv; if (mul) - *mul = bestmul; + *mul = bestmul - 1; if (index) *index = i; - return rate; + return bestrate; } static long clk_pll_round_rate(struct clk_hw *hw, unsigned long rate, -- cgit v1.2.3-70-g09d2 From 87e2ed338f1b56798807ccf12eb6112d25062202 Mon Sep 17 00:00:00 2001 From: Boris BREZILLON Date: Tue, 2 Sep 2014 09:50:16 +0200 Subject: clk: at91: fix recalc_rate implementation of PLL driver MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Use the cached values to calculate PLL rate instead of the register values. This is required to prevent erroneous PLL rate return when the PLL rate has been configured but the PLL is not prepared yet. Signed-off-by: Boris BREZILLON Reported-by: Gaël PORTAY Tested-by: Gaël PORTAY Signed-off-by: Mike Turquette --- drivers/clk/at91/clk-pll.c | 11 +++-------- 1 file changed, 3 insertions(+), 8 deletions(-) (limited to 'drivers/clk') diff --git a/drivers/clk/at91/clk-pll.c b/drivers/clk/at91/clk-pll.c index a1adcf18602..6ec79dbc084 100644 --- a/drivers/clk/at91/clk-pll.c +++ b/drivers/clk/at91/clk-pll.c @@ -151,16 +151,11 @@ static unsigned long clk_pll_recalc_rate(struct clk_hw *hw, unsigned long parent_rate) { struct clk_pll *pll = to_clk_pll(hw); - const struct clk_pll_layout *layout = pll->layout; - struct at91_pmc *pmc = pll->pmc; - int offset = PLL_REG(pll->id); - u32 tmp = pmc_read(pmc, offset) & layout->pllr_mask; - u8 div = PLL_DIV(tmp); - u16 mul = PLL_MUL(tmp, layout); - if (!div || !mul) + + if (!pll->div || !pll->mul) return 0; - return (parent_rate * (mul + 1)) / div; + return (parent_rate / pll->div) * (pll->mul + 1); } static long clk_pll_get_best_div_mul(struct clk_pll *pll, unsigned long rate, -- cgit v1.2.3-70-g09d2 From 13a6073d4c5db3103011eebe8c68b049323ced20 Mon Sep 17 00:00:00 2001 From: Boris BREZILLON Date: Tue, 2 Sep 2014 09:50:17 +0200 Subject: clk: at91: rework rm9200 USB clock to propagate set_rate to the parent clk MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The RM9200 USB clock is actually connected to a single parent (the PLLB) on which we can apply a specific divider. The USB clock divider does not allow for fine grained control on the USB clock frequency, hence propagating the set_rate request to the parent is the only choice we have to properly configure the USB clock rate. Signed-off-by: Boris BREZILLON Reported-by: Gaël PORTAY Tested-by: Gaël PORTAY Signed-off-by: Mike Turquette --- drivers/clk/at91/clk-usb.c | 13 ++++++++++--- 1 file changed, 10 insertions(+), 3 deletions(-) (limited to 'drivers/clk') diff --git a/drivers/clk/at91/clk-usb.c b/drivers/clk/at91/clk-usb.c index 7d1d26a4bd0..183877712c6 100644 --- a/drivers/clk/at91/clk-usb.c +++ b/drivers/clk/at91/clk-usb.c @@ -238,16 +238,22 @@ static long at91rm9200_clk_usb_round_rate(struct clk_hw *hw, unsigned long rate, unsigned long *parent_rate) { struct at91rm9200_clk_usb *usb = to_at91rm9200_clk_usb(hw); + struct clk *parent = __clk_get_parent(hw->clk); unsigned long bestrate = 0; int bestdiff = -1; unsigned long tmprate; int tmpdiff; int i = 0; - for (i = 0; i < 4; i++) { + for (i = 0; i < RM9200_USB_DIV_TAB_SIZE; i++) { + unsigned long tmp_parent_rate; + if (!usb->divisors[i]) continue; - tmprate = *parent_rate / usb->divisors[i]; + + tmp_parent_rate = rate * usb->divisors[i]; + tmp_parent_rate = __clk_round_rate(parent, tmp_parent_rate); + tmprate = tmp_parent_rate / usb->divisors[i]; if (tmprate < rate) tmpdiff = rate - tmprate; else @@ -256,6 +262,7 @@ static long at91rm9200_clk_usb_round_rate(struct clk_hw *hw, unsigned long rate, if (bestdiff < 0 || bestdiff > tmpdiff) { bestrate = tmprate; bestdiff = tmpdiff; + *parent_rate = tmp_parent_rate; } if (!bestdiff) @@ -311,7 +318,7 @@ at91rm9200_clk_register_usb(struct at91_pmc *pmc, const char *name, init.ops = &at91rm9200_usb_ops; init.parent_names = &parent_name; init.num_parents = 1; - init.flags = 0; + init.flags = CLK_SET_RATE_PARENT; usb->hw.init = &init; usb->pmc = pmc; -- cgit v1.2.3-70-g09d2 From 16eeaec77922c1349e130a9541e83a023deaf11f Mon Sep 17 00:00:00 2001 From: Boris BREZILLON Date: Tue, 2 Sep 2014 09:50:18 +0200 Subject: clk: at91: fix div by zero in USB clock driver MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Test rate value before calculating the div value to avoid div by zero. Signed-off-by: Boris BREZILLON Reported-by: Gaël PORTAY Tested-by: Gaël PORTAY Signed-off-by: Mike Turquette --- drivers/clk/at91/clk-usb.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) (limited to 'drivers/clk') diff --git a/drivers/clk/at91/clk-usb.c b/drivers/clk/at91/clk-usb.c index 183877712c6..24b5b020753 100644 --- a/drivers/clk/at91/clk-usb.c +++ b/drivers/clk/at91/clk-usb.c @@ -279,10 +279,13 @@ static int at91rm9200_clk_usb_set_rate(struct clk_hw *hw, unsigned long rate, int i; struct at91rm9200_clk_usb *usb = to_at91rm9200_clk_usb(hw); struct at91_pmc *pmc = usb->pmc; - unsigned long div = parent_rate / rate; + unsigned long div; - if (parent_rate % rate) + if (!rate || parent_rate % rate) return -EINVAL; + + div = parent_rate / rate; + for (i = 0; i < RM9200_USB_DIV_TAB_SIZE; i++) { if (usb->divisors[i] == div) { tmp = pmc_read(pmc, AT91_CKGR_PLLBR) & -- cgit v1.2.3-70-g09d2 From 15917b16022427c53755abff4dc7051f3076dd7a Mon Sep 17 00:00:00 2001 From: Gregory CLEMENT Date: Tue, 2 Sep 2014 10:15:16 +0200 Subject: clk: mvebu: Fix clk frequency value if SSCG is enabled When the SSCG (Spread Spectrum Clock Generator) is enabled, it shifts the frequency of the clock. The percentage is no more than 1% but when the clock is used for a timer it leads to a clock drift. This patch allows to correct the affected clock when the SSCG is enabled. The check is done in an new optional function related to each SoC: is_sscg_enabled(). The fix is done with the other new optional function related to each SoC: fix_sscg_deviation. If one these functions are not present then no correction is done on the clock frequency. Signed-off-by: Gregory CLEMENT Tested-by: Leigh Brown Link: https://lkml.kernel.org/r/1409645719-20003-2-git-send-email-gregory.clement@free-electrons.com Signed-off-by: Jason Cooper --- drivers/clk/mvebu/common.c | 82 ++++++++++++++++++++++++++++++++++++++++++++++ drivers/clk/mvebu/common.h | 7 ++++ 2 files changed, 89 insertions(+) (limited to 'drivers/clk') diff --git a/drivers/clk/mvebu/common.c b/drivers/clk/mvebu/common.c index 25ceccf939a..354bbadb3bc 100644 --- a/drivers/clk/mvebu/common.c +++ b/drivers/clk/mvebu/common.c @@ -26,8 +26,85 @@ * Core Clocks */ +#define SSCG_CONF_MODE(reg) (((reg) >> 16) & 0x3) +#define SSCG_SPREAD_DOWN 0x0 +#define SSCG_SPREAD_UP 0x1 +#define SSCG_SPREAD_CENTRAL 0x2 +#define SSCG_CONF_LOW(reg) (((reg) >> 8) & 0xFF) +#define SSCG_CONF_HIGH(reg) ((reg) & 0xFF) + static struct clk_onecell_data clk_data; +/* + * This function can be used by the Kirkwood, the Armada 370, the + * Armada XP and the Armada 375 SoC. The name of the function was + * chosen following the dt convention: using the first known SoC + * compatible with it. + */ +u32 kirkwood_fix_sscg_deviation(struct device_node *np, u32 system_clk) +{ + struct device_node *sscg_np = NULL; + void __iomem *sscg_map; + u32 sscg_reg; + s32 low_bound, high_bound; + u64 freq_swing_half; + + sscg_np = of_find_node_by_name(np, "sscg"); + if (sscg_np == NULL) { + pr_err("cannot get SSCG register node\n"); + return system_clk; + } + + sscg_map = of_iomap(sscg_np, 0); + if (sscg_map == NULL) { + pr_err("cannot map SSCG register\n"); + goto out; + } + + sscg_reg = readl(sscg_map); + high_bound = SSCG_CONF_HIGH(sscg_reg); + low_bound = SSCG_CONF_LOW(sscg_reg); + + if ((high_bound - low_bound) <= 0) + goto out; + /* + * From Marvell engineer we got the following formula (when + * this code was written, the datasheet was erroneous) + * Spread percentage = 1/96 * (H - L) / H + * H = SSCG_High_Boundary + * L = SSCG_Low_Boundary + * + * As the deviation is half of spread then it lead to the + * following formula in the code. + * + * To avoid an overflow and not lose any significant digit in + * the same time we have to use a 64 bit integer. + */ + + freq_swing_half = (((u64)high_bound - (u64)low_bound) + * (u64)system_clk); + do_div(freq_swing_half, (2 * 96 * high_bound)); + + switch (SSCG_CONF_MODE(sscg_reg)) { + case SSCG_SPREAD_DOWN: + system_clk -= freq_swing_half; + break; + case SSCG_SPREAD_UP: + system_clk += freq_swing_half; + break; + case SSCG_SPREAD_CENTRAL: + default: + break; + } + + iounmap(sscg_map); + +out: + of_node_put(sscg_np); + + return system_clk; +} + void __init mvebu_coreclk_setup(struct device_node *np, const struct coreclk_soc_desc *desc) { @@ -62,6 +139,11 @@ void __init mvebu_coreclk_setup(struct device_node *np, of_property_read_string_index(np, "clock-output-names", 1, &cpuclk_name); rate = desc->get_cpu_freq(base); + + if (desc->is_sscg_enabled && desc->fix_sscg_deviation + && desc->is_sscg_enabled(base)) + rate = desc->fix_sscg_deviation(np, rate); + clk_data.clks[1] = clk_register_fixed_rate(NULL, cpuclk_name, NULL, CLK_IS_ROOT, rate); WARN_ON(IS_ERR(clk_data.clks[1])); diff --git a/drivers/clk/mvebu/common.h b/drivers/clk/mvebu/common.h index f968b4d9df9..59efaa850bd 100644 --- a/drivers/clk/mvebu/common.h +++ b/drivers/clk/mvebu/common.h @@ -28,6 +28,8 @@ struct coreclk_soc_desc { u32 (*get_tclk_freq)(void __iomem *sar); u32 (*get_cpu_freq)(void __iomem *sar); void (*get_clk_ratio)(void __iomem *sar, int id, int *mult, int *div); + bool (*is_sscg_enabled)(void __iomem *sar); + u32 (*fix_sscg_deviation)(struct device_node *np, u32 system_clk); const struct coreclk_ratio *ratios; int num_ratios; }; @@ -45,4 +47,9 @@ void __init mvebu_coreclk_setup(struct device_node *np, void __init mvebu_clk_gating_setup(struct device_node *np, const struct clk_gating_soc_desc *desc); +/* + * This function is shared among the Kirkwood, Armada 370, Armada XP + * and Armada 375 SoC + */ +u32 kirkwood_fix_sscg_deviation(struct device_node *np, u32 system_clk); #endif -- cgit v1.2.3-70-g09d2 From 5e1a63f5f548bb8a3967f00be2f0e1e04290c613 Mon Sep 17 00:00:00 2001 From: Gregory CLEMENT Date: Tue, 2 Sep 2014 10:15:17 +0200 Subject: clk: mvebu: armada-370: Fix timer drift caused by the SSCG deviation This commit activates the SSCG deviation correction for the Armada 370. It uses the optional function introduced by the commit "clk: mvebu: Fix clk frequency value if SSCG is enabled". Without this fix the deviation measured on a Mirabox was of a few second each hour, whereas with this fix it was reduced at around 50ppm (around 4s per day). Signed-off-by: Gregory CLEMENT Tested-by: Leigh Brown Link: https://lkml.kernel.org/r/1409645719-20003-3-git-send-email-gregory.clement@free-electrons.com Signed-off-by: Jason Cooper --- drivers/clk/mvebu/armada-370.c | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'drivers/clk') diff --git a/drivers/clk/mvebu/armada-370.c b/drivers/clk/mvebu/armada-370.c index bef198a8386..756f0f39d6a 100644 --- a/drivers/clk/mvebu/armada-370.c +++ b/drivers/clk/mvebu/armada-370.c @@ -23,6 +23,7 @@ */ #define SARL 0 /* Low part [0:31] */ +#define SARL_A370_SSCG_ENABLE BIT(10) #define SARL_A370_PCLK_FREQ_OPT 11 #define SARL_A370_PCLK_FREQ_OPT_MASK 0xF #define SARL_A370_FAB_FREQ_OPT 15 @@ -133,10 +134,17 @@ static void __init a370_get_clk_ratio( } } +static bool a370_is_sscg_enabled(void __iomem *sar) +{ + return !(readl(sar) & SARL_A370_SSCG_ENABLE); +} + static const struct coreclk_soc_desc a370_coreclks = { .get_tclk_freq = a370_get_tclk_freq, .get_cpu_freq = a370_get_cpu_freq, .get_clk_ratio = a370_get_clk_ratio, + .is_sscg_enabled = a370_is_sscg_enabled, + .fix_sscg_deviation = kirkwood_fix_sscg_deviation, .ratios = a370_coreclk_ratios, .num_ratios = ARRAY_SIZE(a370_coreclk_ratios), }; -- cgit v1.2.3-70-g09d2 From ceac26c64200015a5e6e358e903b1ca9a6f41dd8 Mon Sep 17 00:00:00 2001 From: Gregory CLEMENT Date: Tue, 2 Sep 2014 10:15:19 +0200 Subject: clk: mvebu: armada-375: Fix the description of the SAR in the comment For dealing with the code we use the SAR1 and not the SAR0. The code was correct, and now the comments too. Signed-off-by: Gregory CLEMENT Tested-by: Leigh Brown Link: https://lkml.kernel.org/r/1409645719-20003-5-git-send-email-gregory.clement@free-electrons.com Signed-off-by: Jason Cooper --- drivers/clk/mvebu/armada-375.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/clk') diff --git a/drivers/clk/mvebu/armada-375.c b/drivers/clk/mvebu/armada-375.c index c991a4d95e1..c7af2242b79 100644 --- a/drivers/clk/mvebu/armada-375.c +++ b/drivers/clk/mvebu/armada-375.c @@ -27,14 +27,14 @@ * all modified at the same time, and not separately as for the Armada * 370 or the Armada XP SoCs. * - * SAR0[21:17] : CPU frequency DDR frequency L2 frequency + * SAR1[21:17] : CPU frequency DDR frequency L2 frequency * 6 = 400 MHz 400 MHz 200 MHz * 15 = 600 MHz 600 MHz 300 MHz * 21 = 800 MHz 534 MHz 400 MHz * 25 = 1000 MHz 500 MHz 500 MHz * others reserved. * - * SAR0[22] : TCLK frequency + * SAR1[22] : TCLK frequency * 0 = 166 MHz * 1 = 200 MHz */ -- cgit v1.2.3-70-g09d2 From 88cebf5e09775b6ef024685729d41c3dd03a711d Mon Sep 17 00:00:00 2001 From: Soren Brinkmann Date: Tue, 2 Sep 2014 16:02:07 -0700 Subject: clk: zynq: Remove unnecessary OOM message As checkpatch suggests: WARNING: Possible unnecessary 'out of memory' message, remove an error message after failing kmalloc() from the PLL driver. Signed-off-by: Soren Brinkmann Signed-off-by: Mike Turquette --- drivers/clk/zynq/pll.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) (limited to 'drivers/clk') diff --git a/drivers/clk/zynq/pll.c b/drivers/clk/zynq/pll.c index cec97596fe6..00d72fb5c03 100644 --- a/drivers/clk/zynq/pll.c +++ b/drivers/clk/zynq/pll.c @@ -211,10 +211,8 @@ struct clk *clk_register_zynq_pll(const char *name, const char *parent, }; pll = kmalloc(sizeof(*pll), GFP_KERNEL); - if (!pll) { - pr_err("%s: Could not allocate Zynq PLL clk.\n", __func__); + if (!pll) return ERR_PTR(-ENOMEM); - } /* Populate the struct */ pll->hw.init = &initd; -- cgit v1.2.3-70-g09d2 From 034cc6ebae0a811abb0de6f1a7b58e9a6a8c95c7 Mon Sep 17 00:00:00 2001 From: Soren Brinkmann Date: Tue, 2 Sep 2014 16:02:08 -0700 Subject: clk: zynq: Remove pointless return at end of void function Signed-off-by: Soren Brinkmann Signed-off-by: Mike Turquette --- drivers/clk/zynq/clkc.c | 1 - 1 file changed, 1 deletion(-) (limited to 'drivers/clk') diff --git a/drivers/clk/zynq/clkc.c b/drivers/clk/zynq/clkc.c index 246cf1226ea..6ab793ac8c2 100644 --- a/drivers/clk/zynq/clkc.c +++ b/drivers/clk/zynq/clkc.c @@ -619,5 +619,4 @@ void __init zynq_clock_init(void) np_err: of_node_put(np); BUG(); - return; } -- cgit v1.2.3-70-g09d2 From 8eaf503480e4b45c2cb5d555388ab209ae305dd3 Mon Sep 17 00:00:00 2001 From: Soren Brinkmann Date: Tue, 2 Sep 2014 16:02:09 -0700 Subject: clk: zynq: Move const initdata into correct code section Use __initconst instead of __initdata for constant init data. Signed-off-by: Soren Brinkmann Signed-off-by: Mike Turquette --- drivers/clk/zynq/clkc.c | 29 ++++++++++++++--------------- 1 file changed, 14 insertions(+), 15 deletions(-) (limited to 'drivers/clk') diff --git a/drivers/clk/zynq/clkc.c b/drivers/clk/zynq/clkc.c index 6ab793ac8c2..9037bebd69f 100644 --- a/drivers/clk/zynq/clkc.c +++ b/drivers/clk/zynq/clkc.c @@ -85,24 +85,22 @@ static DEFINE_SPINLOCK(canmioclk_lock); static DEFINE_SPINLOCK(dbgclk_lock); static DEFINE_SPINLOCK(aperclk_lock); -static const char dummy_nm[] __initconst = "dummy_name"; - -static const char *armpll_parents[] __initdata = {"armpll_int", "ps_clk"}; -static const char *ddrpll_parents[] __initdata = {"ddrpll_int", "ps_clk"}; -static const char *iopll_parents[] __initdata = {"iopll_int", "ps_clk"}; -static const char *gem0_mux_parents[] __initdata = {"gem0_div1", dummy_nm}; -static const char *gem1_mux_parents[] __initdata = {"gem1_div1", dummy_nm}; -static const char *can0_mio_mux2_parents[] __initdata = {"can0_gate", +static const char *armpll_parents[] __initconst = {"armpll_int", "ps_clk"}; +static const char *ddrpll_parents[] __initconst = {"ddrpll_int", "ps_clk"}; +static const char *iopll_parents[] __initconst = {"iopll_int", "ps_clk"}; +static const char *gem0_mux_parents[] __initconst = {"gem0_div1", "dummy_name"}; +static const char *gem1_mux_parents[] __initconst = {"gem1_div1", "dummy_name"}; +static const char *can0_mio_mux2_parents[] __initconst = {"can0_gate", "can0_mio_mux"}; -static const char *can1_mio_mux2_parents[] __initdata = {"can1_gate", +static const char *can1_mio_mux2_parents[] __initconst = {"can1_gate", "can1_mio_mux"}; -static const char *dbg_emio_mux_parents[] __initdata = {"dbg_div", - dummy_nm}; +static const char *dbg_emio_mux_parents[] __initconst = {"dbg_div", + "dummy_name"}; -static const char *dbgtrc_emio_input_names[] __initdata = {"trace_emio_clk"}; -static const char *gem0_emio_input_names[] __initdata = {"gem0_emio_clk"}; -static const char *gem1_emio_input_names[] __initdata = {"gem1_emio_clk"}; -static const char *swdt_ext_clk_input_names[] __initdata = {"swdt_ext_clk"}; +static const char *dbgtrc_emio_input_names[] __initconst = {"trace_emio_clk"}; +static const char *gem0_emio_input_names[] __initconst = {"gem0_emio_clk"}; +static const char *gem1_emio_input_names[] __initconst = {"gem1_emio_clk"}; +static const char *swdt_ext_clk_input_names[] __initconst = {"swdt_ext_clk"}; static void __init zynq_clk_register_fclk(enum zynq_clk fclk, const char *clk_name, void __iomem *fclk_ctrl_reg, @@ -230,6 +228,7 @@ static void __init zynq_clk_setup(struct device_node *np) const char *periph_parents[4]; const char *swdt_ext_clk_mux_parents[2]; const char *can_mio_mux_parents[NUM_MIO_PINS]; + const char *dummy_nm = "dummy_name"; pr_info("Zynq clock init\n"); -- cgit v1.2.3-70-g09d2 From a8a76f563cfa1a4e47b6d8b2bef9c0d44a3fd7b0 Mon Sep 17 00:00:00 2001 From: Javier Martinez Canillas Date: Mon, 18 Aug 2014 10:32:59 +0200 Subject: clk: max77686: Add DT include for MAX77686 PMIC clock This patch adds a dt-binding include for Maxim 77686 PMIC clock IDs that can be used by both the max77686 clock driver and Device Tree source files. Signed-off-by: Javier Martinez Canillas Reviewed-by: Krzysztof Kozlowski Reviewed-by: Mike Turquette Signed-off-by: Mike Turquette --- drivers/clk/clk-max77686.c | 7 +------ include/dt-bindings/clock/maxim,max77686.h | 23 +++++++++++++++++++++++ 2 files changed, 24 insertions(+), 6 deletions(-) create mode 100644 include/dt-bindings/clock/maxim,max77686.h (limited to 'drivers/clk') diff --git a/drivers/clk/clk-max77686.c b/drivers/clk/clk-max77686.c index 3d7e8dd8fd5..185b611c957 100644 --- a/drivers/clk/clk-max77686.c +++ b/drivers/clk/clk-max77686.c @@ -30,12 +30,7 @@ #include #include -enum { - MAX77686_CLK_AP = 0, - MAX77686_CLK_CP, - MAX77686_CLK_PMIC, - MAX77686_CLKS_NUM, -}; +#include struct max77686_clk { struct max77686_dev *iodev; diff --git a/include/dt-bindings/clock/maxim,max77686.h b/include/dt-bindings/clock/maxim,max77686.h new file mode 100644 index 00000000000..7b28b090586 --- /dev/null +++ b/include/dt-bindings/clock/maxim,max77686.h @@ -0,0 +1,23 @@ +/* + * Copyright (C) 2014 Google, Inc + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Device Tree binding constants clocks for the Maxim 77686 PMIC. + */ + +#ifndef _DT_BINDINGS_CLOCK_MAXIM_MAX77686_CLOCK_H +#define _DT_BINDINGS_CLOCK_MAXIM_MAX77686_CLOCK_H + +/* Fixed rate clocks. */ + +#define MAX77686_CLK_AP 0 +#define MAX77686_CLK_CP 1 +#define MAX77686_CLK_PMIC 2 + +/* Total number of clocks. */ +#define MAX77686_CLKS_NUM (MAX77686_CLK_PMIC + 1) + +#endif /* _DT_BINDINGS_CLOCK_MAXIM_MAX77686_CLOCK_H */ -- cgit v1.2.3-70-g09d2 From 5dbbb00f712edff8454f9741db61f9e0a4fec919 Mon Sep 17 00:00:00 2001 From: Javier Martinez Canillas Date: Mon, 18 Aug 2014 10:33:00 +0200 Subject: clk: Add generic driver for Maxim PMIC clocks Maxim Integrated Power Management ICs are very similar with regard to their clock outputs. Most of the clock drivers for these chips are duplicating code and are simpler enough that can be converted to use a generic driver to consolidate code and avoid duplication. Signed-off-by: Javier Martinez Canillas Reviewed-by: Krzysztof Kozlowski Signed-off-by: Mike Turquette --- drivers/clk/Kconfig | 3 + drivers/clk/Makefile | 1 + drivers/clk/clk-max-gen.c | 192 ++++++++++++++++++++++++++++++++++++++++++++++ drivers/clk/clk-max-gen.h | 32 ++++++++ 4 files changed, 228 insertions(+) create mode 100644 drivers/clk/clk-max-gen.c create mode 100644 drivers/clk/clk-max-gen.h (limited to 'drivers/clk') diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig index cfd3af7b2cb..726d72aad49 100644 --- a/drivers/clk/Kconfig +++ b/drivers/clk/Kconfig @@ -32,6 +32,9 @@ config COMMON_CLK_WM831X source "drivers/clk/versatile/Kconfig" +config COMMON_CLK_MAX_GEN + bool + config COMMON_CLK_MAX77686 tristate "Clock driver for Maxim 77686 MFD" depends on MFD_MAX77686 diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile index f537a0b1f79..9de85f689ff 100644 --- a/drivers/clk/Makefile +++ b/drivers/clk/Makefile @@ -22,6 +22,7 @@ obj-$(CONFIG_ARCH_CLPS711X) += clk-clps711x.o obj-$(CONFIG_ARCH_EFM32) += clk-efm32gg.o obj-$(CONFIG_ARCH_HIGHBANK) += clk-highbank.o obj-$(CONFIG_MACH_LOONGSON1) += clk-ls1x.o +obj-$(CONFIG_COMMON_CLK_MAX_GEN) += clk-max-gen.o obj-$(CONFIG_COMMON_CLK_MAX77686) += clk-max77686.o obj-$(CONFIG_ARCH_MOXART) += clk-moxart.o obj-$(CONFIG_ARCH_NOMADIK) += clk-nomadik.o diff --git a/drivers/clk/clk-max-gen.c b/drivers/clk/clk-max-gen.c new file mode 100644 index 00000000000..6505049d50f --- /dev/null +++ b/drivers/clk/clk-max-gen.c @@ -0,0 +1,192 @@ +/* + * clk-max-gen.c - Generic clock driver for Maxim PMICs clocks + * + * Copyright (C) 2014 Google, Inc + * + * Copyright (C) 2012 Samsung Electornics + * Jonghwa Lee + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * This driver is based on clk-max77686.c + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +struct max_gen_clk { + struct regmap *regmap; + u32 mask; + u32 reg; + struct clk_hw hw; +}; + +static struct max_gen_clk *to_max_gen_clk(struct clk_hw *hw) +{ + return container_of(hw, struct max_gen_clk, hw); +} + +static int max_gen_clk_prepare(struct clk_hw *hw) +{ + struct max_gen_clk *max_gen = to_max_gen_clk(hw); + + return regmap_update_bits(max_gen->regmap, max_gen->reg, + max_gen->mask, max_gen->mask); +} + +static void max_gen_clk_unprepare(struct clk_hw *hw) +{ + struct max_gen_clk *max_gen = to_max_gen_clk(hw); + + regmap_update_bits(max_gen->regmap, max_gen->reg, + max_gen->mask, ~max_gen->mask); +} + +static int max_gen_clk_is_prepared(struct clk_hw *hw) +{ + struct max_gen_clk *max_gen = to_max_gen_clk(hw); + int ret; + u32 val; + + ret = regmap_read(max_gen->regmap, max_gen->reg, &val); + + if (ret < 0) + return -EINVAL; + + return val & max_gen->mask; +} + +static unsigned long max_gen_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + return 32768; +} + +struct clk_ops max_gen_clk_ops = { + .prepare = max_gen_clk_prepare, + .unprepare = max_gen_clk_unprepare, + .is_prepared = max_gen_clk_is_prepared, + .recalc_rate = max_gen_recalc_rate, +}; +EXPORT_SYMBOL_GPL(max_gen_clk_ops); + +static struct clk *max_gen_clk_register(struct device *dev, + struct max_gen_clk *max_gen) +{ + struct clk *clk; + struct clk_hw *hw = &max_gen->hw; + int ret; + + clk = devm_clk_register(dev, hw); + if (IS_ERR(clk)) + return clk; + + ret = clk_register_clkdev(clk, hw->init->name, NULL); + + if (ret) + return ERR_PTR(ret); + + return clk; +} + +int max_gen_clk_probe(struct platform_device *pdev, struct regmap *regmap, + u32 reg, struct clk_init_data *clks_init, int num_init) +{ + int i, ret; + struct max_gen_clk *max_gen_clks; + struct clk **clocks; + struct device *dev = pdev->dev.parent; + const char *clk_name; + struct clk_init_data *init; + + clocks = devm_kzalloc(dev, sizeof(struct clk *) * num_init, GFP_KERNEL); + if (!clocks) + return -ENOMEM; + + max_gen_clks = devm_kzalloc(dev, sizeof(struct max_gen_clk) + * num_init, GFP_KERNEL); + if (!max_gen_clks) + return -ENOMEM; + + for (i = 0; i < num_init; i++) { + max_gen_clks[i].regmap = regmap; + max_gen_clks[i].mask = 1 << i; + max_gen_clks[i].reg = reg; + + init = devm_kzalloc(dev, sizeof(*init), GFP_KERNEL); + if (!init) + return -ENOMEM; + + if (dev->of_node && + !of_property_read_string_index(dev->of_node, + "clock-output-names", + i, &clk_name)) + init->name = clk_name; + else + init->name = clks_init[i].name; + + init->ops = clks_init[i].ops; + init->flags = clks_init[i].flags; + + max_gen_clks[i].hw.init = init; + + clocks[i] = max_gen_clk_register(dev, &max_gen_clks[i]); + if (IS_ERR(clocks[i])) { + ret = PTR_ERR(clocks[i]); + dev_err(dev, "failed to register %s\n", + max_gen_clks[i].hw.init->name); + return ret; + } + } + + platform_set_drvdata(pdev, clocks); + + if (dev->of_node) { + struct clk_onecell_data *of_data; + + of_data = devm_kzalloc(dev, sizeof(*of_data), GFP_KERNEL); + if (!of_data) + return -ENOMEM; + + of_data->clks = clocks; + of_data->clk_num = num_init; + ret = of_clk_add_provider(dev->of_node, of_clk_src_onecell_get, + of_data); + + if (ret) { + dev_err(dev, "failed to register OF clock provider\n"); + return ret; + } + } + + return 0; +} +EXPORT_SYMBOL_GPL(max_gen_clk_probe); + +int max_gen_clk_remove(struct platform_device *pdev, int num_init) +{ + struct device *dev = pdev->dev.parent; + + if (dev->of_node) + of_clk_del_provider(dev->of_node); + + return 0; +} +EXPORT_SYMBOL_GPL(max_gen_clk_remove); diff --git a/drivers/clk/clk-max-gen.h b/drivers/clk/clk-max-gen.h new file mode 100644 index 00000000000..997e86fc3f4 --- /dev/null +++ b/drivers/clk/clk-max-gen.h @@ -0,0 +1,32 @@ +/* + * clk-max-gen.h - Generic clock driver for Maxim PMICs clocks + * + * Copyright (C) 2014 Google, Inc + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#ifndef __CLK_MAX_GEN_H__ +#define __CLK_MAX_GEN_H__ + +#include +#include +#include +#include +#include + +int max_gen_clk_probe(struct platform_device *pdev, struct regmap *regmap, + u32 reg, struct clk_init_data *clks_init, int num_init); +int max_gen_clk_remove(struct platform_device *pdev, int num_init); +extern struct clk_ops max_gen_clk_ops; + +#endif /* __CLK_MAX_GEN_H__ */ -- cgit v1.2.3-70-g09d2 From 1887d69308f94eec12d581b4dbab67c28274039d Mon Sep 17 00:00:00 2001 From: Javier Martinez Canillas Date: Mon, 18 Aug 2014 10:33:01 +0200 Subject: clk: max77686: Convert to the generic max clock driver Clocks drivers for Maxim PMIC are very similar so they can be converted to use the generic Maxim clock driver. Also, while being there use module_platform_driver() helper macro to eliminate more boilerplate code. Signed-off-by: Javier Martinez Canillas Reviewed-by: Krzysztof Kozlowski Signed-off-by: Mike Turquette --- drivers/clk/Kconfig | 1 + drivers/clk/clk-max77686.c | 176 +++------------------------------------------ 2 files changed, 9 insertions(+), 168 deletions(-) (limited to 'drivers/clk') diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig index 726d72aad49..d68b14b3c0e 100644 --- a/drivers/clk/Kconfig +++ b/drivers/clk/Kconfig @@ -38,6 +38,7 @@ config COMMON_CLK_MAX_GEN config COMMON_CLK_MAX77686 tristate "Clock driver for Maxim 77686 MFD" depends on MFD_MAX77686 + select COMMON_CLK_MAX_GEN ---help--- This driver supports Maxim 77686 crystal oscillator clock. diff --git a/drivers/clk/clk-max77686.c b/drivers/clk/clk-max77686.c index 185b611c957..ed0beb4cb39 100644 --- a/drivers/clk/clk-max77686.c +++ b/drivers/clk/clk-max77686.c @@ -31,187 +31,37 @@ #include #include - -struct max77686_clk { - struct max77686_dev *iodev; - u32 mask; - struct clk_hw hw; - struct clk_lookup *lookup; -}; - -static struct max77686_clk *to_max77686_clk(struct clk_hw *hw) -{ - return container_of(hw, struct max77686_clk, hw); -} - -static int max77686_clk_prepare(struct clk_hw *hw) -{ - struct max77686_clk *max77686 = to_max77686_clk(hw); - - return regmap_update_bits(max77686->iodev->regmap, - MAX77686_REG_32KHZ, max77686->mask, - max77686->mask); -} - -static void max77686_clk_unprepare(struct clk_hw *hw) -{ - struct max77686_clk *max77686 = to_max77686_clk(hw); - - regmap_update_bits(max77686->iodev->regmap, - MAX77686_REG_32KHZ, max77686->mask, ~max77686->mask); -} - -static int max77686_clk_is_prepared(struct clk_hw *hw) -{ - struct max77686_clk *max77686 = to_max77686_clk(hw); - int ret; - u32 val; - - ret = regmap_read(max77686->iodev->regmap, - MAX77686_REG_32KHZ, &val); - - if (ret < 0) - return -EINVAL; - - return val & max77686->mask; -} - -static unsigned long max77686_recalc_rate(struct clk_hw *hw, - unsigned long parent_rate) -{ - return 32768; -} - -static struct clk_ops max77686_clk_ops = { - .prepare = max77686_clk_prepare, - .unprepare = max77686_clk_unprepare, - .is_prepared = max77686_clk_is_prepared, - .recalc_rate = max77686_recalc_rate, -}; +#include "clk-max-gen.h" static struct clk_init_data max77686_clks_init[MAX77686_CLKS_NUM] = { [MAX77686_CLK_AP] = { .name = "32khz_ap", - .ops = &max77686_clk_ops, + .ops = &max_gen_clk_ops, .flags = CLK_IS_ROOT, }, [MAX77686_CLK_CP] = { .name = "32khz_cp", - .ops = &max77686_clk_ops, + .ops = &max_gen_clk_ops, .flags = CLK_IS_ROOT, }, [MAX77686_CLK_PMIC] = { .name = "32khz_pmic", - .ops = &max77686_clk_ops, + .ops = &max_gen_clk_ops, .flags = CLK_IS_ROOT, }, }; -static struct clk *max77686_clk_register(struct device *dev, - struct max77686_clk *max77686) -{ - struct clk *clk; - struct clk_hw *hw = &max77686->hw; - - clk = clk_register(dev, hw); - if (IS_ERR(clk)) - return clk; - - max77686->lookup = kzalloc(sizeof(struct clk_lookup), GFP_KERNEL); - if (!max77686->lookup) - return ERR_PTR(-ENOMEM); - - max77686->lookup->con_id = hw->init->name; - max77686->lookup->clk = clk; - - clkdev_add(max77686->lookup); - - return clk; -} - static int max77686_clk_probe(struct platform_device *pdev) { struct max77686_dev *iodev = dev_get_drvdata(pdev->dev.parent); - struct max77686_clk *max77686_clks[MAX77686_CLKS_NUM]; - struct clk **clocks; - int i, ret; - - clocks = devm_kzalloc(&pdev->dev, sizeof(struct clk *) - * MAX77686_CLKS_NUM, GFP_KERNEL); - if (!clocks) - return -ENOMEM; - - for (i = 0; i < MAX77686_CLKS_NUM; i++) { - max77686_clks[i] = devm_kzalloc(&pdev->dev, - sizeof(struct max77686_clk), GFP_KERNEL); - if (!max77686_clks[i]) - return -ENOMEM; - } - - for (i = 0; i < MAX77686_CLKS_NUM; i++) { - max77686_clks[i]->iodev = iodev; - max77686_clks[i]->mask = 1 << i; - max77686_clks[i]->hw.init = &max77686_clks_init[i]; - - clocks[i] = max77686_clk_register(&pdev->dev, max77686_clks[i]); - if (IS_ERR(clocks[i])) { - ret = PTR_ERR(clocks[i]); - dev_err(&pdev->dev, "failed to register %s\n", - max77686_clks[i]->hw.init->name); - goto err_clocks; - } - } - - platform_set_drvdata(pdev, clocks); - - if (iodev->dev->of_node) { - struct clk_onecell_data *of_data; - - of_data = devm_kzalloc(&pdev->dev, - sizeof(*of_data), GFP_KERNEL); - if (!of_data) { - ret = -ENOMEM; - goto err_clocks; - } - of_data->clks = clocks; - of_data->clk_num = MAX77686_CLKS_NUM; - ret = of_clk_add_provider(iodev->dev->of_node, - of_clk_src_onecell_get, of_data); - if (ret) { - dev_err(&pdev->dev, "failed to register OF clock provider\n"); - goto err_clocks; - } - } - - return 0; - -err_clocks: - for (--i; i >= 0; --i) { - clkdev_drop(max77686_clks[i]->lookup); - clk_unregister(max77686_clks[i]->hw.clk); - } - - return ret; + return max_gen_clk_probe(pdev, iodev->regmap, MAX77686_REG_32KHZ, + max77686_clks_init, MAX77686_CLKS_NUM); } static int max77686_clk_remove(struct platform_device *pdev) { - struct max77686_dev *iodev = dev_get_drvdata(pdev->dev.parent); - struct clk **clocks = platform_get_drvdata(pdev); - int i; - - if (iodev->dev->of_node) - of_clk_del_provider(iodev->dev->of_node); - - for (i = 0; i < MAX77686_CLKS_NUM; i++) { - struct clk_hw *hw = __clk_get_hw(clocks[i]); - struct max77686_clk *max77686 = to_max77686_clk(hw); - - clkdev_drop(max77686->lookup); - clk_unregister(clocks[i]); - } - return 0; + return max_gen_clk_remove(pdev, MAX77686_CLKS_NUM); } static const struct platform_device_id max77686_clk_id[] = { @@ -230,17 +80,7 @@ static struct platform_driver max77686_clk_driver = { .id_table = max77686_clk_id, }; -static int __init max77686_clk_init(void) -{ - return platform_driver_register(&max77686_clk_driver); -} -subsys_initcall(max77686_clk_init); - -static void __init max77686_clk_cleanup(void) -{ - platform_driver_unregister(&max77686_clk_driver); -} -module_exit(max77686_clk_cleanup); +module_platform_driver(max77686_clk_driver); MODULE_DESCRIPTION("MAXIM 77686 Clock Driver"); MODULE_AUTHOR("Jonghwa Lee "); -- cgit v1.2.3-70-g09d2 From 83ccf16cb9247b6b657637c31e4c2035fe64ae64 Mon Sep 17 00:00:00 2001 From: Javier Martinez Canillas Date: Mon, 18 Aug 2014 10:33:03 +0200 Subject: clk: Add driver for Maxim 77802 PMIC clocks The MAX77802 PMIC has two 32.768kHz Buffered Clock Outputs with Low Jitter Mode. This patch adds support for these two clocks. Signed-off-by: Javier Martinez Canillas Reviewed-by: Krzysztof Kozlowski Signed-off-by: Mike Turquette --- drivers/clk/Kconfig | 7 +++ drivers/clk/Makefile | 1 + drivers/clk/clk-max77802.c | 98 ++++++++++++++++++++++++++++++ include/dt-bindings/clock/maxim,max77802.h | 22 +++++++ 4 files changed, 128 insertions(+) create mode 100644 drivers/clk/clk-max77802.c create mode 100644 include/dt-bindings/clock/maxim,max77802.h (limited to 'drivers/clk') diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig index d68b14b3c0e..85131ae0b28 100644 --- a/drivers/clk/Kconfig +++ b/drivers/clk/Kconfig @@ -42,6 +42,13 @@ config COMMON_CLK_MAX77686 ---help--- This driver supports Maxim 77686 crystal oscillator clock. +config COMMON_CLK_MAX77802 + tristate "Clock driver for Maxim 77802 PMIC" + depends on MFD_MAX77686 + select COMMON_CLK_MAX_GEN + ---help--- + This driver supports Maxim 77802 crystal oscillator clock. + config COMMON_CLK_SI5351 tristate "Clock driver for SiLabs 5351A/B/C" depends on I2C diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile index 9de85f689ff..27c542ba9e7 100644 --- a/drivers/clk/Makefile +++ b/drivers/clk/Makefile @@ -24,6 +24,7 @@ obj-$(CONFIG_ARCH_HIGHBANK) += clk-highbank.o obj-$(CONFIG_MACH_LOONGSON1) += clk-ls1x.o obj-$(CONFIG_COMMON_CLK_MAX_GEN) += clk-max-gen.o obj-$(CONFIG_COMMON_CLK_MAX77686) += clk-max77686.o +obj-$(CONFIG_COMMON_CLK_MAX77802) += clk-max77802.o obj-$(CONFIG_ARCH_MOXART) += clk-moxart.o obj-$(CONFIG_ARCH_NOMADIK) += clk-nomadik.o obj-$(CONFIG_ARCH_NSPIRE) += clk-nspire.o diff --git a/drivers/clk/clk-max77802.c b/drivers/clk/clk-max77802.c new file mode 100644 index 00000000000..8e480c5c294 --- /dev/null +++ b/drivers/clk/clk-max77802.c @@ -0,0 +1,98 @@ +/* + * clk-max77802.c - Clock driver for Maxim 77802 + * + * Copyright (C) 2014 Google, Inc + * + * Copyright (C) 2012 Samsung Electornics + * Jonghwa Lee + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * This driver is based on clk-max77686.c + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include "clk-max-gen.h" + +#define MAX77802_CLOCK_OPMODE_MASK 0x1 +#define MAX77802_CLOCK_LOW_JITTER_SHIFT 0x3 + +static struct clk_init_data max77802_clks_init[MAX77802_CLKS_NUM] = { + [MAX77802_CLK_32K_AP] = { + .name = "32khz_ap", + .ops = &max_gen_clk_ops, + .flags = CLK_IS_ROOT, + }, + [MAX77802_CLK_32K_CP] = { + .name = "32khz_cp", + .ops = &max_gen_clk_ops, + .flags = CLK_IS_ROOT, + }, +}; + +static int max77802_clk_probe(struct platform_device *pdev) +{ + struct max77686_dev *iodev = dev_get_drvdata(pdev->dev.parent); + int ret; + + ret = max_gen_clk_probe(pdev, iodev->regmap, MAX77802_REG_32KHZ, + max77802_clks_init, MAX77802_CLKS_NUM); + + if (ret) { + dev_err(&pdev->dev, "generic probe failed %d\n", ret); + return ret; + } + + /* Enable low-jitter mode on the 32khz clocks. */ + ret = regmap_update_bits(iodev->regmap, MAX77802_REG_32KHZ, + 1 << MAX77802_CLOCK_LOW_JITTER_SHIFT, + 1 << MAX77802_CLOCK_LOW_JITTER_SHIFT); + if (ret < 0) + dev_err(&pdev->dev, "failed to enable low-jitter mode\n"); + + return ret; +} + +static int max77802_clk_remove(struct platform_device *pdev) +{ + return max_gen_clk_remove(pdev, MAX77802_CLKS_NUM); +} + +static const struct platform_device_id max77802_clk_id[] = { + { "max77802-clk", 0}, + { }, +}; +MODULE_DEVICE_TABLE(platform, max77802_clk_id); + +static struct platform_driver max77802_clk_driver = { + .driver = { + .name = "max77802-clk", + .owner = THIS_MODULE, + }, + .probe = max77802_clk_probe, + .remove = max77802_clk_remove, + .id_table = max77802_clk_id, +}; + +module_platform_driver(max77802_clk_driver); + +MODULE_DESCRIPTION("MAXIM 77802 Clock Driver"); +MODULE_AUTHOR("Javier Martinez Canillas "); +MODULE_LICENSE("GPL"); diff --git a/include/dt-bindings/clock/maxim,max77802.h b/include/dt-bindings/clock/maxim,max77802.h new file mode 100644 index 00000000000..997312edcbb --- /dev/null +++ b/include/dt-bindings/clock/maxim,max77802.h @@ -0,0 +1,22 @@ +/* + * Copyright (C) 2014 Google, Inc + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Device Tree binding constants clocks for the Maxim 77802 PMIC. + */ + +#ifndef _DT_BINDINGS_CLOCK_MAXIM_MAX77802_CLOCK_H +#define _DT_BINDINGS_CLOCK_MAXIM_MAX77802_CLOCK_H + +/* Fixed rate clocks. */ + +#define MAX77802_CLK_32K_AP 0 +#define MAX77802_CLK_32K_CP 1 + +/* Total number of clocks. */ +#define MAX77802_CLKS_NUM (MAX77802_CLK_32K_CP + 1) + +#endif /* _DT_BINDINGS_CLOCK_MAXIM_MAX77802_CLOCK_H */ -- cgit v1.2.3-70-g09d2 From feaefa0ea1f1ab3fb92519aef2099ab4d75cce05 Mon Sep 17 00:00:00 2001 From: Heiko Stübner Date: Thu, 28 Aug 2014 12:46:10 +0200 Subject: clk: fractional-divider: cast parent_rate to u64 before multiplying On 32bit architectures, like ARM calculating the fractional rate will do the multiplication before converting the value to u64 when it gets assigned to ret, which can produce overflows. The error in question happened with a parent_rate of 386MHz, m = 3000, n = 60000, which resulted in a wrong rate value of 15812Hz. Therefore cast parent_rate to u64 to make sure the multiplication happens in a 64bit space and produces the correct 192MHz in the example. Signed-off-by: Heiko Stuebner Signed-off-by: Mike Turquette --- drivers/clk/clk-fractional-divider.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/clk') diff --git a/drivers/clk/clk-fractional-divider.c b/drivers/clk/clk-fractional-divider.c index ede685ca0d2..82a59d0086c 100644 --- a/drivers/clk/clk-fractional-divider.c +++ b/drivers/clk/clk-fractional-divider.c @@ -36,7 +36,7 @@ static unsigned long clk_fd_recalc_rate(struct clk_hw *hw, m = (val & fd->mmask) >> fd->mshift; n = (val & fd->nmask) >> fd->nshift; - ret = parent_rate * m; + ret = (u64)parent_rate * m; do_div(ret, n); return ret; -- cgit v1.2.3-70-g09d2 From 2fed71e57ae8b44e854a36d33e9a86a94a7628a4 Mon Sep 17 00:00:00 2001 From: Heiko Stübner Date: Wed, 10 Sep 2014 17:52:02 +0200 Subject: clk: rockchip: also protect hclk_peri as critical The dwc2 usb controller also uses agressive clock gating, which in this case leads to hclk_peri getting disabled and hanging the system. Therefore move it to the critical clocks until we also control that part of the system. Signed-off-by: Heiko Stuebner Signed-off-by: Mike Turquette --- drivers/clk/rockchip/clk-rk3188.c | 1 + drivers/clk/rockchip/clk-rk3288.c | 1 + 2 files changed, 2 insertions(+) (limited to 'drivers/clk') diff --git a/drivers/clk/rockchip/clk-rk3188.c b/drivers/clk/rockchip/clk-rk3188.c index 732118ed55a..0147614e94b 100644 --- a/drivers/clk/rockchip/clk-rk3188.c +++ b/drivers/clk/rockchip/clk-rk3188.c @@ -602,6 +602,7 @@ static struct rockchip_clk_branch rk3188_clk_branches[] __initdata = { static const char *rk3188_critical_clocks[] __initconst = { "aclk_cpu", "aclk_peri", + "hclk_peri", }; static void __init rk3188_common_clk_init(struct device_node *np) diff --git a/drivers/clk/rockchip/clk-rk3288.c b/drivers/clk/rockchip/clk-rk3288.c index 038b1aaf8c5..08c24c6e3e6 100644 --- a/drivers/clk/rockchip/clk-rk3288.c +++ b/drivers/clk/rockchip/clk-rk3288.c @@ -683,6 +683,7 @@ static struct rockchip_clk_branch rk3288_clk_branches[] __initdata = { static const char *rk3288_critical_clocks[] __initconst = { "aclk_cpu", "aclk_peri", + "hclk_peri", }; static void __init rk3288_clk_init(struct device_node *np) -- cgit v1.2.3-70-g09d2 From 6314b6796e3c070d4c8086b08dfd453a0aeac4cf Mon Sep 17 00:00:00 2001 From: Stephen Boyd Date: Thu, 4 Sep 2014 23:37:49 -0700 Subject: clk: Don't hold prepare_lock across debugfs creation Rob Clark reports a lockdep splat that involves the prepare_lock chained with the mmap semaphore. ====================================================== [ INFO: possible circular locking dependency detected ] 3.17.0-rc1-00050-g07a489b #802 Tainted: G W ------------------------------------------------------- Xorg.bin/5413 is trying to acquire lock: (prepare_lock){+.+.+.}, at: [] clk_prepare_lock+0x88/0xfc but task is already holding lock: (qcom_iommu_lock){+.+...}, at: [] qcom_iommu_unmap+0x1c/0x1f0 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #4 (qcom_iommu_lock){+.+...}: [] qcom_iommu_map+0x28/0x450 [] iommu_map+0xc8/0x12c [] msm_iommu_map+0xb4/0x130 [] msm_gem_get_iova_locked+0x9c/0xe8 [] msm_gem_get_iova+0x4c/0x64 [] mdp4_kms_init+0x4c4/0x6c0 [] msm_load+0x2ac/0x34c [] drm_dev_register+0xac/0x108 [] drm_platform_init+0x50/0xf0 [] try_to_bring_up_master.part.3+0xc8/0x108 [] component_master_add_with_match+0xa8/0x104 [] msm_pdev_probe+0x64/0x70 [] platform_drv_probe+0x2c/0x60 [] driver_probe_device+0x108/0x234 [] bus_for_each_drv+0x64/0x98 [] device_attach+0x78/0x8c [] bus_probe_device+0x88/0xac [] deferred_probe_work_func+0x68/0x9c [] process_one_work+0x1a0/0x40c [] worker_thread+0x44/0x4d8 [] kthread+0xd8/0xec [] ret_from_fork+0x14/0x2c -> #3 (&dev->struct_mutex){+.+.+.}: [] drm_gem_mmap+0x38/0xd0 [] msm_gem_mmap+0xc/0x5c [] mmap_region+0x35c/0x6c8 [] do_mmap_pgoff+0x314/0x398 [] vm_mmap_pgoff+0x84/0xb4 [] SyS_mmap_pgoff+0x94/0xbc [] ret_fast_syscall+0x0/0x48 -> #2 (&mm->mmap_sem){++++++}: [] filldir64+0x68/0x180 [] dcache_readdir+0x188/0x22c [] iterate_dir+0x9c/0x11c [] SyS_getdents64+0x78/0xe8 [] ret_fast_syscall+0x0/0x48 -> #1 (&sb->s_type->i_mutex_key#3){+.+.+.}: [] __create_file+0x58/0x1dc [] debugfs_create_dir+0x1c/0x24 [] clk_debug_create_subtree+0x20/0x170 [] clk_debug_init+0xec/0x14c [] do_one_initcall+0x8c/0x1c8 [] kernel_init_freeable+0x13c/0x1dc [] kernel_init+0x8/0xe8 [] ret_from_fork+0x14/0x2c -> #0 (prepare_lock){+.+.+.}: [] mutex_lock_nested+0x70/0x3e8 [] clk_prepare_lock+0x88/0xfc [] clk_prepare+0xc/0x24 [] __enable_clocks.isra.4+0x18/0xa4 [] __flush_iotlb_va+0xe0/0x114 [] qcom_iommu_unmap+0xac/0x1f0 [] iommu_unmap+0x9c/0xe8 [] msm_iommu_unmap+0x64/0x84 [] msm_gem_free_object+0x11c/0x338 [] drm_gem_object_handle_unreference_unlocked+0xfc/0x130 [] drm_gem_object_release_handle+0x50/0x68 [] idr_for_each+0xa8/0xdc [] drm_gem_release+0x1c/0x28 [] drm_release+0x370/0x428 [] __fput+0x98/0x1e8 [] task_work_run+0xb0/0xfc [] do_exit+0x2ec/0x948 [] do_group_exit+0x4c/0xb8 [] get_signal+0x28c/0x6ac [] do_signal+0xc4/0x3e4 [] do_work_pending+0xb4/0xc4 [] work_pending+0xc/0x20 other info that might help us debug this: Chain exists of: prepare_lock --> &dev->struct_mutex --> qcom_iommu_lock Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(qcom_iommu_lock); lock(&dev->struct_mutex); lock(qcom_iommu_lock); lock(prepare_lock); *** DEADLOCK *** 3 locks held by Xorg.bin/5413: #0: (drm_global_mutex){+.+.+.}, at: [] drm_release+0x34/0x428 #1: (&dev->struct_mutex){+.+.+.}, at: [] drm_gem_object_handle_unreference_unlocked+0xcc/0x130 #2: (qcom_iommu_lock){+.+...}, at: [] qcom_iommu_unmap+0x1c/0x1f0 stack backtrace: CPU: 1 PID: 5413 Comm: Xorg.bin Tainted: G W 3.17.0-rc1-00050-g07a489b #802 [] (unwind_backtrace) from [] (show_stack+0x10/0x14) [] (show_stack) from [] (dump_stack+0x98/0xb8) [] (dump_stack) from [] (print_circular_bug+0x218/0x340) [] (print_circular_bug) from [] (__lock_acquire+0x1d24/0x20b8) [] (__lock_acquire) from [] (lock_acquire+0x9c/0xbc) [] (lock_acquire) from [] (mutex_lock_nested+0x70/0x3e8) [] (mutex_lock_nested) from [] (clk_prepare_lock+0x88/0xfc) [] (clk_prepare_lock) from [] (clk_prepare+0xc/0x24) [] (clk_prepare) from [] (__enable_clocks.isra.4+0x18/0xa4) [] (__enable_clocks.isra.4) from [] (__flush_iotlb_va+0xe0/0x114) [] (__flush_iotlb_va) from [] (qcom_iommu_unmap+0xac/0x1f0) [] (qcom_iommu_unmap) from [] (iommu_unmap+0x9c/0xe8) [] (iommu_unmap) from [] (msm_iommu_unmap+0x64/0x84) [] (msm_iommu_unmap) from [] (msm_gem_free_object+0x11c/0x338) [] (msm_gem_free_object) from [] (drm_gem_object_handle_unreference_unlocked+0xfc/0x130) [] (drm_gem_object_handle_unreference_unlocked) from [] (drm_gem_object_release_handle+0x50/0x68) [] (drm_gem_object_release_handle) from [] (idr_for_each+0xa8/0xdc) [] (idr_for_each) from [] (drm_gem_release+0x1c/0x28) [] (drm_gem_release) from [] (drm_release+0x370/0x428) [] (drm_release) from [] (__fput+0x98/0x1e8) [] (__fput) from [] (task_work_run+0xb0/0xfc) [] (task_work_run) from [] (do_exit+0x2ec/0x948) [] (do_exit) from [] (do_group_exit+0x4c/0xb8) [] (do_group_exit) from [] (get_signal+0x28c/0x6ac) [] (get_signal) from [] (do_signal+0xc4/0x3e4) [] (do_signal) from [] (do_work_pending+0xb4/0xc4) [] (do_work_pending) from [] (work_pending+0xc/0x20) We can break this chain if we don't hold the prepare_lock while creating debugfs directories. We only hold the prepare_lock right now because we're traversing the clock tree recursively and we don't want the hierarchy to change during the traversal. Replacing this traversal with a simple linked list walk allows us to only grab a list lock instead of the prepare_lock, thus breaking the lock chain. Signed-off-by: Stephen Boyd Signed-off-by: Mike Turquette --- drivers/clk/clk.c | 73 +++++++++++++++++---------------------------- include/linux/clk-private.h | 1 + 2 files changed, 28 insertions(+), 46 deletions(-) (limited to 'drivers/clk') diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c index b76fa69b44c..8ca28189e4e 100644 --- a/drivers/clk/clk.c +++ b/drivers/clk/clk.c @@ -100,6 +100,8 @@ static void clk_enable_unlock(unsigned long flags) static struct dentry *rootdir; static int inited = 0; +static DEFINE_MUTEX(clk_debug_lock); +static HLIST_HEAD(clk_debug_list); static struct hlist_head *all_lists[] = { &clk_root_list, @@ -300,28 +302,6 @@ out: return ret; } -/* caller must hold prepare_lock */ -static int clk_debug_create_subtree(struct clk *clk, struct dentry *pdentry) -{ - struct clk *child; - int ret = -EINVAL;; - - if (!clk || !pdentry) - goto out; - - ret = clk_debug_create_one(clk, pdentry); - - if (ret) - goto out; - - hlist_for_each_entry(child, &clk->children, child_node) - clk_debug_create_subtree(child, pdentry); - - ret = 0; -out: - return ret; -} - /** * clk_debug_register - add a clk node to the debugfs clk tree * @clk: the clk being added to the debugfs clk tree @@ -329,20 +309,21 @@ out: * Dynamically adds a clk to the debugfs clk tree if debugfs has been * initialized. Otherwise it bails out early since the debugfs clk tree * will be created lazily by clk_debug_init as part of a late_initcall. - * - * Caller must hold prepare_lock. Only clk_init calls this function (so - * far) so this is taken care. */ static int clk_debug_register(struct clk *clk) { int ret = 0; + mutex_lock(&clk_debug_lock); + hlist_add_head(&clk->debug_node, &clk_debug_list); + if (!inited) - goto out; + goto unlock; - ret = clk_debug_create_subtree(clk, rootdir); + ret = clk_debug_create_one(clk, rootdir); +unlock: + mutex_unlock(&clk_debug_lock); -out: return ret; } @@ -353,12 +334,18 @@ out: * Dynamically removes a clk and all it's children clk nodes from the * debugfs clk tree if clk->dentry points to debugfs created by * clk_debug_register in __clk_init. - * - * Caller must hold prepare_lock. */ static void clk_debug_unregister(struct clk *clk) { + mutex_lock(&clk_debug_lock); + if (!clk->dentry) + goto out; + + hlist_del_init(&clk->debug_node); debugfs_remove_recursive(clk->dentry); + clk->dentry = NULL; +out: + mutex_unlock(&clk_debug_lock); } struct dentry *clk_debugfs_add_file(struct clk *clk, char *name, umode_t mode, @@ -415,17 +402,12 @@ static int __init clk_debug_init(void) if (!d) return -ENOMEM; - clk_prepare_lock(); - - hlist_for_each_entry(clk, &clk_root_list, child_node) - clk_debug_create_subtree(clk, rootdir); - - hlist_for_each_entry(clk, &clk_orphan_list, child_node) - clk_debug_create_subtree(clk, rootdir); + mutex_lock(&clk_debug_lock); + hlist_for_each_entry(clk, &clk_debug_list, debug_node) + clk_debug_create_one(clk, rootdir); inited = 1; - - clk_prepare_unlock(); + mutex_unlock(&clk_debug_lock); return 0; } @@ -2087,14 +2069,16 @@ void clk_unregister(struct clk *clk) { unsigned long flags; - if (!clk || WARN_ON_ONCE(IS_ERR(clk))) - return; + if (!clk || WARN_ON_ONCE(IS_ERR(clk))) + return; + + clk_debug_unregister(clk); clk_prepare_lock(); if (clk->ops == &clk_nodrv_ops) { pr_err("%s: unregistered clock: %s\n", __func__, clk->name); - goto out; + return; } /* * Assign empty clock ops for consumers that might still hold @@ -2113,16 +2097,13 @@ void clk_unregister(struct clk *clk) clk_set_parent(child, NULL); } - clk_debug_unregister(clk); - hlist_del_init(&clk->child_node); if (clk->prepare_count) pr_warn("%s: unregistering prepared clock: %s\n", __func__, clk->name); - kref_put(&clk->ref, __clk_release); -out: + clk_prepare_unlock(); } EXPORT_SYMBOL_GPL(clk_unregister); diff --git a/include/linux/clk-private.h b/include/linux/clk-private.h index efbf70b9fd8..4ed34105c37 100644 --- a/include/linux/clk-private.h +++ b/include/linux/clk-private.h @@ -48,6 +48,7 @@ struct clk { unsigned long accuracy; struct hlist_head children; struct hlist_node child_node; + struct hlist_node debug_node; unsigned int notifier_count; #ifdef CONFIG_DEBUG_FS struct dentry *dentry; -- cgit v1.2.3-70-g09d2 From cfe4c93b58924b3764cd7269d3d953049405e938 Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Sat, 6 Sep 2014 14:45:10 +0800 Subject: clk: sunxi: add correct divider table for sun4i-apb0 clock MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The sun4i-apb0 clock, as found on all platforms using it, is a power-of-two-based divider clock, with a special divider of 2 for value 0. This was causing the clock framework to incorrectly calculate the clock rate for apb1 and related modules on sun6i and sun8i. On sun[4/5/7]i, u-boot SPL configures the divider with value 1 for /2 divider, so no suprises there. This patch adds a proper divider table for it, so the correct clock rate can be calculated. Signed-off-by: Chen-Yu Tsai Acked-by: Emilio López Signed-off-by: Maxime Ripard --- drivers/clk/sunxi/clk-sunxi.c | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'drivers/clk') diff --git a/drivers/clk/sunxi/clk-sunxi.c b/drivers/clk/sunxi/clk-sunxi.c index b654b7b1d13..2cf6581329a 100644 --- a/drivers/clk/sunxi/clk-sunxi.c +++ b/drivers/clk/sunxi/clk-sunxi.c @@ -762,10 +762,19 @@ static const struct div_data sun4i_ahb_data __initconst = { .width = 2, }; +static const struct clk_div_table sun4i_apb0_table[] __initconst = { + { .val = 0, .div = 2 }, + { .val = 1, .div = 2 }, + { .val = 2, .div = 4 }, + { .val = 3, .div = 8 }, + { } /* sentinel */ +}; + static const struct div_data sun4i_apb0_data __initconst = { .shift = 8, .pow = 1, .width = 2, + .table = sun4i_apb0_table, }; static const struct div_data sun6i_a31_apb2_div_data __initconst = { -- cgit v1.2.3-70-g09d2 From 5f093ee76c8fc1ec82de8da04bd087663c853e7b Mon Sep 17 00:00:00 2001 From: Thomas Petazzoni Date: Tue, 16 Sep 2014 17:15:03 +0200 Subject: clk: mvebu: fix sscg node lookup Commit 15917b16022427c53755abff4dc7051f3076dd7a ("clk: mvebu: Fix clk frequency value if SSCG is enabled") introduced some logic in the common mvebu clock code to adjust the clock frequency according to the configuration of the SSCG. In order to do this, it looks up for a DT node called "sscg" and maps it before accessing the SSCG configuration register. However, the lookup is currently done using: sscg_np = of_find_node_by_name(np, "sscg"); where "np" is a pointer to the DT node of the clock for which we are calculating the adjusted frequency. This means that if the "sscg" node is *after* the clock node in the Device Tree, it works fine (and that's the case for Armada 370). However, if it turns out that the "sscg" node is *before* the clock node in the Device Tree, it won't work because the sscg node will not be found. What we really want here is a search of the entire Device Tree, not only starting from the clock node, so instead of passing "np" as first argument of of_find_node_by_name(), we simply need to pass NULL. Passing a non-NULL argument is typically used in a loop, so that the search for the next matching node starts right after the node that was matched. This makes the "np" argument to the kirkwood_fix_sscg_deviation() function unnecessary, which leads to further cleanups. Signed-off-by: Thomas Petazzoni Fixes: 15917b1602242 ("clk: mvebu: Fix clk frequency value if SSCG is enabled") Acked-by: Gregory CLEMENT Link: https://lkml.kernel.org/r/1410880503-2322-1-git-send-email-thomas.petazzoni@free-electrons.com Signed-off-by: Jason Cooper --- drivers/clk/mvebu/common.c | 6 +++--- drivers/clk/mvebu/common.h | 4 ++-- 2 files changed, 5 insertions(+), 5 deletions(-) (limited to 'drivers/clk') diff --git a/drivers/clk/mvebu/common.c b/drivers/clk/mvebu/common.c index 354bbadb3bc..f902c18f455 100644 --- a/drivers/clk/mvebu/common.c +++ b/drivers/clk/mvebu/common.c @@ -41,7 +41,7 @@ static struct clk_onecell_data clk_data; * chosen following the dt convention: using the first known SoC * compatible with it. */ -u32 kirkwood_fix_sscg_deviation(struct device_node *np, u32 system_clk) +u32 kirkwood_fix_sscg_deviation(u32 system_clk) { struct device_node *sscg_np = NULL; void __iomem *sscg_map; @@ -49,7 +49,7 @@ u32 kirkwood_fix_sscg_deviation(struct device_node *np, u32 system_clk) s32 low_bound, high_bound; u64 freq_swing_half; - sscg_np = of_find_node_by_name(np, "sscg"); + sscg_np = of_find_node_by_name(NULL, "sscg"); if (sscg_np == NULL) { pr_err("cannot get SSCG register node\n"); return system_clk; @@ -142,7 +142,7 @@ void __init mvebu_coreclk_setup(struct device_node *np, if (desc->is_sscg_enabled && desc->fix_sscg_deviation && desc->is_sscg_enabled(base)) - rate = desc->fix_sscg_deviation(np, rate); + rate = desc->fix_sscg_deviation(rate); clk_data.clks[1] = clk_register_fixed_rate(NULL, cpuclk_name, NULL, CLK_IS_ROOT, rate); diff --git a/drivers/clk/mvebu/common.h b/drivers/clk/mvebu/common.h index 59efaa850bd..989ab146461 100644 --- a/drivers/clk/mvebu/common.h +++ b/drivers/clk/mvebu/common.h @@ -29,7 +29,7 @@ struct coreclk_soc_desc { u32 (*get_cpu_freq)(void __iomem *sar); void (*get_clk_ratio)(void __iomem *sar, int id, int *mult, int *div); bool (*is_sscg_enabled)(void __iomem *sar); - u32 (*fix_sscg_deviation)(struct device_node *np, u32 system_clk); + u32 (*fix_sscg_deviation)(u32 system_clk); const struct coreclk_ratio *ratios; int num_ratios; }; @@ -51,5 +51,5 @@ void __init mvebu_clk_gating_setup(struct device_node *np, * This function is shared among the Kirkwood, Armada 370, Armada XP * and Armada 375 SoC */ -u32 kirkwood_fix_sscg_deviation(struct device_node *np, u32 system_clk); +u32 kirkwood_fix_sscg_deviation(u32 system_clk); #endif -- cgit v1.2.3-70-g09d2 From 4c495c204f794125db11e74bd61228901b0acaa7 Mon Sep 17 00:00:00 2001 From: Mikko Perttunen Date: Fri, 11 Jul 2014 17:18:29 +0300 Subject: clk: tegra124: Add PLL_M_UD and PLL_C_UD clocks These clocks are used as parents for some EMC timings. Signed-off-by: Mikko Perttunen --- drivers/clk/tegra/clk-tegra124.c | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'drivers/clk') diff --git a/drivers/clk/tegra/clk-tegra124.c b/drivers/clk/tegra/clk-tegra124.c index 9525c684d14..e3a85842ce0 100644 --- a/drivers/clk/tegra/clk-tegra124.c +++ b/drivers/clk/tegra/clk-tegra124.c @@ -1166,6 +1166,12 @@ static void __init tegra124_pll_init(void __iomem *clk_base, clk_register_clkdev(clk, "pll_c_out1", NULL); clks[TEGRA124_CLK_PLL_C_OUT1] = clk; + /* PLLC_UD */ + clk = clk_register_fixed_factor(NULL, "pll_c_ud", "pll_c", + CLK_SET_RATE_PARENT, 1, 1); + clk_register_clkdev(clk, "pll_c_ud", NULL); + clks[TEGRA124_CLK_PLL_C_UD] = clk; + /* PLLC2 */ clk = tegra_clk_register_pllc("pll_c2", "pll_ref", clk_base, pmc, 0, &pll_c2_params, NULL); @@ -1198,6 +1204,8 @@ static void __init tegra124_pll_init(void __iomem *clk_base, /* PLLM_UD */ clk = clk_register_fixed_factor(NULL, "pll_m_ud", "pll_m", CLK_SET_RATE_PARENT, 1, 1); + clk_register_clkdev(clk, "pll_m_ud", NULL); + clks[TEGRA124_CLK_PLL_M_UD] = clk; /* PLLU */ val = readl(clk_base + pll_u_params.base_reg); -- cgit v1.2.3-70-g09d2 From b9e742c3164344fece3615aca42ec51b41753908 Mon Sep 17 00:00:00 2001 From: Tomeu Vizoso Date: Wed, 17 Sep 2014 11:34:17 +0200 Subject: clk: tegra: Make clock initialization more robust Don't abort clock initialization if we cannot match an entry in tegra_clk_init_table to a valid entry in the clk array. Also log a corresponding error message. This was discovered when testing a patch that removed the EMC clock from tegra124_clks but left a mention in tegra_clk_init_table. Signed-off-by: Tomeu Vizoso Reviewed-by: Stephen Warren --- drivers/clk/tegra/clk.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) (limited to 'drivers/clk') diff --git a/drivers/clk/tegra/clk.c b/drivers/clk/tegra/clk.c index f87c609e8f7..97dc8595c3c 100644 --- a/drivers/clk/tegra/clk.c +++ b/drivers/clk/tegra/clk.c @@ -207,8 +207,13 @@ void __init tegra_init_from_table(struct tegra_clk_init_table *tbl, for (; tbl->clk_id < clk_max; tbl++) { clk = clks[tbl->clk_id]; - if (IS_ERR_OR_NULL(clk)) - return; + if (IS_ERR_OR_NULL(clk)) { + pr_err("%s: invalid entry %ld in clks array for id %d\n", + __func__, PTR_ERR(clk), tbl->clk_id); + WARN_ON(1); + + continue; + } if (tbl->parent_id < clk_max) { struct clk *parent = clks[tbl->parent_id]; -- cgit v1.2.3-70-g09d2 From 5ce37f266650528978cc2fa410b45ded4fd57e1c Mon Sep 17 00:00:00 2001 From: Pankaj Dubey Date: Sat, 6 Sep 2014 18:33:33 +0530 Subject: clk: samsung: exynos3250: fix mout_cam_blk parent list As per user manual of Exynos3250 SRC_CAM can select div_cam_blk_320 if it's value is 0xC, so placing div_cam_blk_320 at proper index in parent list of mout_cam_blk. Signed-off-by: Pankaj Dubey Reviewed-by: Krzysztof Kozlowski Signed-off-by: Tomasz Figa --- drivers/clk/samsung/clk-exynos3250.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/clk') diff --git a/drivers/clk/samsung/clk-exynos3250.c b/drivers/clk/samsung/clk-exynos3250.c index dc85f8e7a2d..8c9d503fb9c 100644 --- a/drivers/clk/samsung/clk-exynos3250.c +++ b/drivers/clk/samsung/clk-exynos3250.c @@ -266,6 +266,7 @@ PNAME(group_sclk_cam_blk_p) = { "xxti", "xusbxti", "none", "none", "none", "none", "div_mpll_pre", "mout_epll_user", "mout_vpll", + "none", "none", "none", "div_cam_blk_320", }; PNAME(group_sclk_fimd0_p) = { "xxti", "xusbxti", "m_bitclkhsdiv4_2l", "none", -- cgit v1.2.3-70-g09d2 From 59037b92f440c10d0c717a91f0b35a49b774c708 Mon Sep 17 00:00:00 2001 From: Pankaj Dubey Date: Tue, 9 Sep 2014 17:24:57 +0530 Subject: clk: samsung: exynos3250: fix width and shift of div_spi0_isp clock Update shift and width field of div_spi0_isp clock as per Exynos3250 user manual. Signed-off-by: Pankaj Dubey Reviewed-by: Krzysztof Kozlowski Signed-off-by: Tomasz Figa --- drivers/clk/samsung/clk-exynos3250.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/clk') diff --git a/drivers/clk/samsung/clk-exynos3250.c b/drivers/clk/samsung/clk-exynos3250.c index 8c9d503fb9c..f8bf4bf0fb0 100644 --- a/drivers/clk/samsung/clk-exynos3250.c +++ b/drivers/clk/samsung/clk-exynos3250.c @@ -424,7 +424,7 @@ static struct samsung_div_clock div_clks[] __initdata = { DIV(CLK_DIV_SPI1_ISP, "div_spi1_isp", "mout_spi1_isp", DIV_ISP, 16, 4), DIV_F(CLK_DIV_SPI0_ISP_PRE, "div_spi0_isp_pre", "div_spi0_isp", DIV_ISP, 8, 8, CLK_SET_RATE_PARENT, 0), - DIV(CLK_DIV_SPI0_ISP, "div_spi0_isp", "mout_spi0_isp", DIV_ISP, 0, 4), + DIV(CLK_DIV_SPI0_ISP, "div_spi0_isp", "mout_spi0_isp", DIV_ISP, 4, 4), /* DIV_FSYS0 */ DIV_F(CLK_DIV_TSADC_PRE, "div_tsadc_pre", "div_tsadc", DIV_FSYS0, 8, 8, -- cgit v1.2.3-70-g09d2 From e82ba578ccdeb3faa90dfcee06dbbb8dffe1145a Mon Sep 17 00:00:00 2001 From: Pankaj Dubey Date: Fri, 5 Sep 2014 17:24:41 +0530 Subject: clk: samsung: exynos3250: fix width field of mout_mmc0/1 As per Exynos3250 user manual mmc0/1 mux selection has 4 bit wide. Signed-off-by: Pankaj Dubey Reviewed-by: Krzysztof Kozlowski Signed-off-by: Tomasz Figa --- drivers/clk/samsung/clk-exynos3250.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/clk') diff --git a/drivers/clk/samsung/clk-exynos3250.c b/drivers/clk/samsung/clk-exynos3250.c index f8bf4bf0fb0..5e2d86e2ced 100644 --- a/drivers/clk/samsung/clk-exynos3250.c +++ b/drivers/clk/samsung/clk-exynos3250.c @@ -354,8 +354,8 @@ static struct samsung_mux_clock mux_clks[] __initdata = { /* SRC_FSYS */ MUX(CLK_MOUT_TSADC, "mout_tsadc", group_sclk_p, SRC_FSYS, 28, 4), - MUX(CLK_MOUT_MMC1, "mout_mmc1", group_sclk_p, SRC_FSYS, 4, 3), - MUX(CLK_MOUT_MMC0, "mout_mmc0", group_sclk_p, SRC_FSYS, 0, 3), + MUX(CLK_MOUT_MMC1, "mout_mmc1", group_sclk_p, SRC_FSYS, 4, 4), + MUX(CLK_MOUT_MMC0, "mout_mmc0", group_sclk_p, SRC_FSYS, 0, 4), /* SRC_PERIL0 */ MUX(CLK_MOUT_UART1, "mout_uart1", group_sclk_p, SRC_PERIL0, 4, 4), -- cgit v1.2.3-70-g09d2 From 22842d244af353a66fa4e6d1978d3f4c39ee4d20 Mon Sep 17 00:00:00 2001 From: Chander Kashyap Date: Wed, 10 Sep 2014 11:26:05 +0530 Subject: clk: samsung: exynos5260: fix typo in clock name The parent name added in parent list as mout_phyclk_mipi_dphy_4l_m_txbyte_clkhs_p, is different than the defined parent due to typo. Signed-off-by: Abhilash Kesavan Signed-off-by: Chander Kashyap Signed-off-by: Pankaj Dubey Reviewed-by: Krzysztof Kozlowski Signed-off-by: Tomasz Figa --- drivers/clk/samsung/clk-exynos5260.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/clk') diff --git a/drivers/clk/samsung/clk-exynos5260.c b/drivers/clk/samsung/clk-exynos5260.c index ce3de97e5f1..2527e39aadc 100644 --- a/drivers/clk/samsung/clk-exynos5260.c +++ b/drivers/clk/samsung/clk-exynos5260.c @@ -1581,7 +1581,7 @@ struct samsung_fixed_rate_clock fixed_rate_clks[] __initdata = { FRATE(PHYCLK_HDMI_LINK_O_TMDS_CLKHI, "phyclk_hdmi_link_o_tmds_clkhi", NULL, CLK_IS_ROOT, 125000000), FRATE(PHYCLK_MIPI_DPHY_4L_M_TXBYTECLKHS, - "phyclk_mipi_dphy_4l_m_txbyteclkhs" , NULL, + "phyclk_mipi_dphy_4l_m_txbyte_clkhs" , NULL, CLK_IS_ROOT, 187500000), FRATE(PHYCLK_DPTX_PHY_O_REF_CLK_24M, "phyclk_dptx_phy_o_ref_clk_24m", NULL, CLK_IS_ROOT, 24000000), -- cgit v1.2.3-70-g09d2 From e3c3f19bc6185e0a24454e7b439e11635e6db960 Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Tue, 2 Sep 2014 15:21:15 +0200 Subject: clk: samsung: exynos3250: Register DMC clk provider Add clock provider for clocks in DMC domain including EPLL and BPLL. The DMC clocks are necessary for Exynos3 devfreq driver. The DMC clock domain uses different address space (0x105C0000) than standard clock domain (0x10030000 - 0x10050000). The difference is huge enough to add new DT node for the clock provider, rather than extending existing address space. Signed-off-by: Krzysztof Kozlowski Signed-off-by: Tomasz Figa --- drivers/clk/samsung/clk-exynos3250.c | 195 +++++++++++++++++++++++++++++++++ include/dt-bindings/clock/exynos3250.h | 27 +++++ 2 files changed, 222 insertions(+) (limited to 'drivers/clk') diff --git a/drivers/clk/samsung/clk-exynos3250.c b/drivers/clk/samsung/clk-exynos3250.c index 5e2d86e2ced..6e6cca39208 100644 --- a/drivers/clk/samsung/clk-exynos3250.c +++ b/drivers/clk/samsung/clk-exynos3250.c @@ -110,7 +110,14 @@ enum exynos3250_plls { nr_plls }; +/* list of PLLs in DMC block to be registered */ +enum exynos3250_dmc_plls { + bpll, epll, + nr_dmc_plls +}; + static void __iomem *reg_base; +static void __iomem *dmc_reg_base; /* * Support for CMU save/restore across system suspends @@ -725,6 +732,25 @@ static struct samsung_pll_rate_table exynos3250_pll_rates[] = { { /* sentinel */ } }; +/* EPLL */ +static struct samsung_pll_rate_table exynos3250_epll_rates[] = { + PLL_36XX_RATE(800000000, 200, 3, 1, 0), + PLL_36XX_RATE(288000000, 96, 2, 2, 0), + PLL_36XX_RATE(192000000, 128, 2, 3, 0), + PLL_36XX_RATE(144000000, 96, 2, 3, 0), + PLL_36XX_RATE( 96000000, 128, 2, 4, 0), + PLL_36XX_RATE( 84000000, 112, 2, 4, 0), + PLL_36XX_RATE( 80000004, 106, 2, 4, 43691), + PLL_36XX_RATE( 73728000, 98, 2, 4, 19923), + PLL_36XX_RATE( 67737598, 270, 3, 5, 62285), + PLL_36XX_RATE( 65535999, 174, 2, 5, 49982), + PLL_36XX_RATE( 50000000, 200, 3, 5, 0), + PLL_36XX_RATE( 49152002, 131, 2, 5, 4719), + PLL_36XX_RATE( 48000000, 128, 2, 5, 0), + PLL_36XX_RATE( 45158401, 180, 3, 5, 41524), + { /* sentinel */ } +}; + /* VPLL */ static struct samsung_pll_rate_table exynos3250_vpll_rates[] = { PLL_36XX_RATE(600000000, 100, 2, 1, 0), @@ -822,3 +848,172 @@ static void __init exynos3250_cmu_init(struct device_node *np) samsung_clk_of_add_provider(np, ctx); } CLK_OF_DECLARE(exynos3250_cmu, "samsung,exynos3250-cmu", exynos3250_cmu_init); + +/* + * CMU DMC + */ + +#define BPLL_LOCK 0x0118 +#define BPLL_CON0 0x0218 +#define BPLL_CON1 0x021c +#define BPLL_CON2 0x0220 +#define SRC_DMC 0x0300 +#define DIV_DMC1 0x0504 +#define GATE_BUS_DMC0 0x0700 +#define GATE_BUS_DMC1 0x0704 +#define GATE_BUS_DMC2 0x0708 +#define GATE_BUS_DMC3 0x070c +#define GATE_SCLK_DMC 0x0800 +#define GATE_IP_DMC0 0x0900 +#define GATE_IP_DMC1 0x0904 +#define EPLL_LOCK 0x1110 +#define EPLL_CON0 0x1114 +#define EPLL_CON1 0x1118 +#define EPLL_CON2 0x111c +#define SRC_EPLL 0x1120 + +/* + * Support for CMU save/restore across system suspends + */ +#ifdef CONFIG_PM_SLEEP +static struct samsung_clk_reg_dump *exynos3250_dmc_clk_regs; + +static unsigned long exynos3250_cmu_dmc_clk_regs[] __initdata = { + BPLL_LOCK, + BPLL_CON0, + BPLL_CON1, + BPLL_CON2, + SRC_DMC, + DIV_DMC1, + GATE_BUS_DMC0, + GATE_BUS_DMC1, + GATE_BUS_DMC2, + GATE_BUS_DMC3, + GATE_SCLK_DMC, + GATE_IP_DMC0, + GATE_IP_DMC1, + EPLL_LOCK, + EPLL_CON0, + EPLL_CON1, + EPLL_CON2, + SRC_EPLL, +}; + +static int exynos3250_dmc_clk_suspend(void) +{ + samsung_clk_save(dmc_reg_base, exynos3250_dmc_clk_regs, + ARRAY_SIZE(exynos3250_cmu_dmc_clk_regs)); + return 0; +} + +static void exynos3250_dmc_clk_resume(void) +{ + samsung_clk_restore(dmc_reg_base, exynos3250_dmc_clk_regs, + ARRAY_SIZE(exynos3250_cmu_dmc_clk_regs)); +} + +static struct syscore_ops exynos3250_dmc_clk_syscore_ops = { + .suspend = exynos3250_dmc_clk_suspend, + .resume = exynos3250_dmc_clk_resume, +}; + +static void exynos3250_dmc_clk_sleep_init(void) +{ + exynos3250_dmc_clk_regs = + samsung_clk_alloc_reg_dump(exynos3250_cmu_dmc_clk_regs, + ARRAY_SIZE(exynos3250_cmu_dmc_clk_regs)); + if (!exynos3250_dmc_clk_regs) { + pr_warn("%s: Failed to allocate sleep save data\n", __func__); + goto err; + } + + register_syscore_ops(&exynos3250_dmc_clk_syscore_ops); + return; +err: + kfree(exynos3250_dmc_clk_regs); +} +#else +static inline void exynos3250_dmc_clk_sleep_init(void) { } +#endif + +PNAME(mout_epll_p) = { "fin_pll", "fout_epll", }; +PNAME(mout_bpll_p) = { "fin_pll", "fout_bpll", }; +PNAME(mout_mpll_mif_p) = { "fin_pll", "sclk_mpll_mif", }; +PNAME(mout_dphy_p) = { "mout_mpll_mif", "mout_bpll", }; + +static struct samsung_mux_clock dmc_mux_clks[] __initdata = { + /* + * NOTE: Following table is sorted by register address in ascending + * order and then bitfield shift in descending order, as it is done + * in the User's Manual. When adding new entries, please make sure + * that the order is preserved, to avoid merge conflicts and make + * further work with defined data easier. + */ + + /* SRC_DMC */ + MUX(CLK_MOUT_MPLL_MIF, "mout_mpll_mif", mout_mpll_mif_p, SRC_DMC, 12, 1), + MUX(CLK_MOUT_BPLL, "mout_bpll", mout_bpll_p, SRC_DMC, 10, 1), + MUX(CLK_MOUT_DPHY, "mout_dphy", mout_dphy_p, SRC_DMC, 8, 1), + MUX(CLK_MOUT_DMC_BUS, "mout_dmc_bus", mout_dphy_p, SRC_DMC, 4, 1), + + /* SRC_EPLL */ + MUX(CLK_MOUT_EPLL, "mout_epll", mout_epll_p, SRC_EPLL, 4, 1), +}; + +static struct samsung_div_clock dmc_div_clks[] __initdata = { + /* + * NOTE: Following table is sorted by register address in ascending + * order and then bitfield shift in descending order, as it is done + * in the User's Manual. When adding new entries, please make sure + * that the order is preserved, to avoid merge conflicts and make + * further work with defined data easier. + */ + + /* DIV_DMC1 */ + DIV(CLK_DIV_DMC, "div_dmc", "div_dmc_pre", DIV_DMC1, 27, 3), + DIV(CLK_DIV_DPHY, "div_dphy", "mout_dphy", DIV_DMC1, 23, 3), + DIV(CLK_DIV_DMC_PRE, "div_dmc_pre", "mout_dmc_bus", DIV_DMC1, 19, 2), + DIV(CLK_DIV_DMCP, "div_dmcp", "div_dmcd", DIV_DMC1, 15, 3), + DIV(CLK_DIV_DMCD, "div_dmcd", "div_dmc", DIV_DMC1, 11, 3), +}; + +static struct samsung_pll_clock exynos3250_dmc_plls[nr_dmc_plls] __initdata = { + [bpll] = PLL(pll_35xx, CLK_FOUT_BPLL, "fout_bpll", "fin_pll", + BPLL_LOCK, BPLL_CON0, NULL), + [epll] = PLL(pll_36xx, CLK_FOUT_EPLL, "fout_epll", "fin_pll", + EPLL_LOCK, EPLL_CON0, NULL), +}; + +static void __init exynos3250_cmu_dmc_init(struct device_node *np) +{ + struct samsung_clk_provider *ctx; + + dmc_reg_base = of_iomap(np, 0); + if (!dmc_reg_base) + panic("%s: failed to map registers\n", __func__); + + ctx = samsung_clk_init(np, dmc_reg_base, NR_CLKS_DMC); + if (!ctx) + panic("%s: unable to allocate context.\n", __func__); + + exynos3250_dmc_plls[bpll].rate_table = exynos3250_pll_rates; + exynos3250_dmc_plls[epll].rate_table = exynos3250_epll_rates; + + pr_err("CLK registering epll bpll: %d, %d, %d, %d\n", + exynos3250_dmc_plls[bpll].rate_table[0].rate, + exynos3250_dmc_plls[bpll].rate_table[0].mdiv, + exynos3250_dmc_plls[bpll].rate_table[0].pdiv, + exynos3250_dmc_plls[bpll].rate_table[0].sdiv + ); + samsung_clk_register_pll(ctx, exynos3250_dmc_plls, + ARRAY_SIZE(exynos3250_dmc_plls), dmc_reg_base); + + samsung_clk_register_mux(ctx, dmc_mux_clks, ARRAY_SIZE(dmc_mux_clks)); + samsung_clk_register_div(ctx, dmc_div_clks, ARRAY_SIZE(dmc_div_clks)); + + exynos3250_dmc_clk_sleep_init(); + + samsung_clk_of_add_provider(np, ctx); +} +CLK_OF_DECLARE(exynos3250_cmu_dmc, "samsung,exynos3250-cmu-dmc", + exynos3250_cmu_dmc_init); diff --git a/include/dt-bindings/clock/exynos3250.h b/include/dt-bindings/clock/exynos3250.h index b535e9da7de..961b9c130ea 100644 --- a/include/dt-bindings/clock/exynos3250.h +++ b/include/dt-bindings/clock/exynos3250.h @@ -255,4 +255,31 @@ */ #define CLK_NR_CLKS 248 +/* + * CMU DMC + */ + +#define CLK_FOUT_BPLL 1 +#define CLK_FOUT_EPLL 2 + +/* Muxes */ +#define CLK_MOUT_MPLL_MIF 8 +#define CLK_MOUT_BPLL 9 +#define CLK_MOUT_DPHY 10 +#define CLK_MOUT_DMC_BUS 11 +#define CLK_MOUT_EPLL 12 + +/* Dividers */ +#define CLK_DIV_DMC 16 +#define CLK_DIV_DPHY 17 +#define CLK_DIV_DMC_PRE 18 +#define CLK_DIV_DMCP 19 +#define CLK_DIV_DMCD 20 + +/* + * Total number of clocks of main CMU. + * NOTE: Must be equal to last clock ID increased by one. + */ +#define NR_CLKS_DMC 21 + #endif /* _DT_BINDINGS_CLOCK_SAMSUNG_EXYNOS3250_CLOCK_H */ -- cgit v1.2.3-70-g09d2 From c14254300131f5dcb3fe18a1ff6eee163c2bc9b4 Mon Sep 17 00:00:00 2001 From: Marek Szyprowski Date: Tue, 16 Sep 2014 13:54:31 +0200 Subject: clk: samsung: exynos4: add missing smmu_g2d clock and update comments This patch adds missing smmu_g2d clock implementation and updates comment about Exynos4 clocks from 278-282 range. Those clocks are available on all Exynos4 SoC series, so the misleading comment has been removed. Signed-off-by: Marek Szyprowski Signed-off-by: Tomasz Figa --- drivers/clk/samsung/clk-exynos4.c | 1 + include/dt-bindings/clock/exynos4.h | 10 +++++----- 2 files changed, 6 insertions(+), 5 deletions(-) (limited to 'drivers/clk') diff --git a/drivers/clk/samsung/clk-exynos4.c b/drivers/clk/samsung/clk-exynos4.c index ac163d7f5bc..12a7cc3b595 100644 --- a/drivers/clk/samsung/clk-exynos4.c +++ b/drivers/clk/samsung/clk-exynos4.c @@ -1183,6 +1183,7 @@ static struct samsung_gate_clock exynos4x12_gate_clks[] __initdata = { GATE(CLK_SPI1_ISP, "spi1_isp", "aclk200", E4X12_GATE_ISP1, 13, CLK_IGNORE_UNUSED | CLK_GET_RATE_NOCACHE, 0), GATE(CLK_G2D, "g2d", "aclk200", GATE_IP_DMC, 23, 0, 0), + GATE(CLK_SMMU_G2D, "smmu_g2d", "aclk200", GATE_IP_DMC, 24, 0, 0), GATE(CLK_TMU_APBIF, "tmu_apbif", "aclk100", E4X12_GATE_IP_PERIR, 17, 0, 0), }; diff --git a/include/dt-bindings/clock/exynos4.h b/include/dt-bindings/clock/exynos4.h index 459bd2bd411..fb981635407 100644 --- a/include/dt-bindings/clock/exynos4.h +++ b/include/dt-bindings/clock/exynos4.h @@ -115,11 +115,11 @@ #define CLK_SMMU_MFCR 275 #define CLK_G3D 276 #define CLK_G2D 277 -#define CLK_ROTATOR 278 /* Exynos4210 only */ -#define CLK_MDMA 279 /* Exynos4210 only */ -#define CLK_SMMU_G2D 280 /* Exynos4210 only */ -#define CLK_SMMU_ROTATOR 281 /* Exynos4210 only */ -#define CLK_SMMU_MDMA 282 /* Exynos4210 only */ +#define CLK_ROTATOR 278 +#define CLK_MDMA 279 +#define CLK_SMMU_G2D 280 +#define CLK_SMMU_ROTATOR 281 +#define CLK_SMMU_MDMA 282 #define CLK_FIMD0 283 #define CLK_MIE0 284 #define CLK_MDNIE0 285 /* Exynos4412 only */ -- cgit v1.2.3-70-g09d2 From 4676f0aab9dc4f9aa729d5a5b75d20f824d77742 Mon Sep 17 00:00:00 2001 From: Marek Szyprowski Date: Tue, 1 Jul 2014 10:10:05 +0200 Subject: clk: samsung: exynos4: add support for MOUT_HDMI and MOUT_MIXER clocks This patch adds support for exporting mout_hdmi and mout_mixer to device tree. Access to those clocks is required to correctly setup HDMI module on Exynos 4210 and 4x12 SoCs. Signed-off-by: Marek Szyprowski CC: Mike Turquette CC: Tomasz Figa Signed-off-by: Tomasz Figa --- drivers/clk/samsung/clk-exynos4.c | 4 ++-- include/dt-bindings/clock/exynos4.h | 2 ++ 2 files changed, 4 insertions(+), 2 deletions(-) (limited to 'drivers/clk') diff --git a/drivers/clk/samsung/clk-exynos4.c b/drivers/clk/samsung/clk-exynos4.c index 12a7cc3b595..1b0dd73636c 100644 --- a/drivers/clk/samsung/clk-exynos4.c +++ b/drivers/clk/samsung/clk-exynos4.c @@ -535,7 +535,7 @@ static struct samsung_fixed_factor_clock exynos4x12_fixed_factor_clks[] __initda static struct samsung_mux_clock exynos4_mux_clks[] __initdata = { MUX_FA(CLK_MOUT_APLL, "mout_apll", mout_apll_p, SRC_CPU, 0, 1, CLK_SET_RATE_PARENT, 0, "mout_apll"), - MUX(0, "mout_hdmi", mout_hdmi_p, SRC_TV, 0, 1), + MUX(CLK_MOUT_HDMI, "mout_hdmi", mout_hdmi_p, SRC_TV, 0, 1), MUX(0, "mout_mfc1", sclk_evpll_p, SRC_MFC, 4, 1), MUX(0, "mout_mfc", mout_mfc_p, SRC_MFC, 8, 1), MUX_F(CLK_MOUT_G3D1, "mout_g3d1", sclk_evpll_p, SRC_G3D, 4, 1, @@ -569,7 +569,7 @@ static struct samsung_mux_clock exynos4210_mux_clks[] __initdata = { MUX(0, "mout_aclk100", sclk_ampll_p4210, SRC_TOP0, 16, 1), MUX(0, "mout_aclk160", sclk_ampll_p4210, SRC_TOP0, 20, 1), MUX(0, "mout_aclk133", sclk_ampll_p4210, SRC_TOP0, 24, 1), - MUX(0, "mout_mixer", mout_mixer_p4210, SRC_TV, 4, 1), + MUX(CLK_MOUT_MIXER, "mout_mixer", mout_mixer_p4210, SRC_TV, 4, 1), MUX(0, "mout_dac", mout_dac_p4210, SRC_TV, 8, 1), MUX(0, "mout_g2d0", sclk_ampll_p4210, E4210_SRC_IMAGE, 0, 1), MUX(0, "mout_g2d1", sclk_evpll_p, E4210_SRC_IMAGE, 4, 1), diff --git a/include/dt-bindings/clock/exynos4.h b/include/dt-bindings/clock/exynos4.h index fb981635407..34fe28c622d 100644 --- a/include/dt-bindings/clock/exynos4.h +++ b/include/dt-bindings/clock/exynos4.h @@ -234,6 +234,8 @@ #define CLK_MOUT_G3D1 393 #define CLK_MOUT_G3D 394 #define CLK_ACLK400_MCUISP 395 /* Exynos4x12 only */ +#define CLK_MOUT_HDMI 396 +#define CLK_MOUT_MIXER 397 /* gate clocks - ppmu */ #define CLK_PPMULEFT 400 -- cgit v1.2.3-70-g09d2 From b511593d7165809019a5b84b35adf95f284410a8 Mon Sep 17 00:00:00 2001 From: Marek Szyprowski Date: Mon, 22 Sep 2014 14:17:12 +0200 Subject: clk: samsung: exynos4: fix g3d clocks sclk_g3d clock doesn't have enable/disable bits, but the driver hijacked g3d gate clock bits for this purpose and didn't provide real g3d clock at all. This patch fixes this issue by adding proper definition for g3d clock and removing incorrect access to GATE_IP_G3D register in sclk_g3d. In addition CLK_SET_RATE_PARENT flag is dropped from sclk_g3d, because it does not make any sense and most likely has been added by mistake. Signed-off-by: Marek Szyprowski [tomasz.figa@gmail.com: Adjusted commit message.] Signed-off-by: Tomasz Figa --- drivers/clk/samsung/clk-exynos4.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) (limited to 'drivers/clk') diff --git a/drivers/clk/samsung/clk-exynos4.c b/drivers/clk/samsung/clk-exynos4.c index 1b0dd73636c..b0c660b484e 100644 --- a/drivers/clk/samsung/clk-exynos4.c +++ b/drivers/clk/samsung/clk-exynos4.c @@ -733,8 +733,7 @@ static struct samsung_div_clock exynos4_div_clks[] __initdata = { DIV(0, "div_csis0", "mout_csis0", DIV_CAM, 24, 4), DIV(0, "div_csis1", "mout_csis1", DIV_CAM, 28, 4), DIV(CLK_SCLK_MFC, "sclk_mfc", "mout_mfc", DIV_MFC, 0, 4), - DIV_F(0, "div_g3d", "mout_g3d", DIV_G3D, 0, 4, - CLK_SET_RATE_PARENT, 0), + DIV(CLK_SCLK_G3D, "sclk_g3d", "mout_g3d", DIV_G3D, 0, 4), DIV(0, "div_fimd0", "mout_fimd0", DIV_LCD0, 0, 4), DIV(0, "div_mipi0", "mout_mipi0", DIV_LCD0, 16, 4), DIV(0, "div_audio0", "mout_audio0", DIV_MAUDIO, 0, 4), @@ -857,8 +856,7 @@ static struct samsung_gate_clock exynos4_gate_clks[] __initdata = { 0), GATE(CLK_TSI, "tsi", "aclk133", GATE_IP_FSYS, 4, 0, 0), GATE(CLK_SROMC, "sromc", "aclk133", GATE_IP_FSYS, 11, 0, 0), - GATE(CLK_SCLK_G3D, "sclk_g3d", "div_g3d", GATE_IP_G3D, 0, - CLK_SET_RATE_PARENT, 0), + GATE(CLK_G3D, "g3d", "aclk200", GATE_IP_G3D, 0, 0, 0), GATE(CLK_PPMUG3D, "ppmug3d", "aclk200", GATE_IP_G3D, 1, 0, 0), GATE(CLK_USB_DEVICE, "usb_device", "aclk133", GATE_IP_FSYS, 13, 0, 0), GATE(CLK_ONENAND, "onenand", "aclk133", GATE_IP_FSYS, 15, 0, 0), -- cgit v1.2.3-70-g09d2 From dc1b3f657f25798b2dc9ed8928b80eb3183019a2 Mon Sep 17 00:00:00 2001 From: Andy Gross Date: Tue, 16 Sep 2014 16:04:12 -0500 Subject: clk: qcom: Add IPQ8064 PLL required for USB This patch adds the PLL0 that is required for the USB clocks to work properly. Signed-off-by: Andy Gross Fixes: 24d8fba44af3 "clk: qcom: Add support for IPQ8064's global clock controller (GCC)" Signed-off-by: Stephen Boyd --- drivers/clk/qcom/gcc-ipq806x.c | 31 ++++++++++++++++++++++++++++++- 1 file changed, 30 insertions(+), 1 deletion(-) (limited to 'drivers/clk') diff --git a/drivers/clk/qcom/gcc-ipq806x.c b/drivers/clk/qcom/gcc-ipq806x.c index 4032e510d9a..193b7c45714 100644 --- a/drivers/clk/qcom/gcc-ipq806x.c +++ b/drivers/clk/qcom/gcc-ipq806x.c @@ -32,6 +32,33 @@ #include "clk-branch.h" #include "reset.h" +static struct clk_pll pll0 = { + .l_reg = 0x30c4, + .m_reg = 0x30c8, + .n_reg = 0x30cc, + .config_reg = 0x30d4, + .mode_reg = 0x30c0, + .status_reg = 0x30d8, + .status_bit = 16, + .clkr.hw.init = &(struct clk_init_data){ + .name = "pll0", + .parent_names = (const char *[]){ "pxo" }, + .num_parents = 1, + .ops = &clk_pll_ops, + }, +}; + +static struct clk_regmap pll0_vote = { + .enable_reg = 0x34c0, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "pll0_vote", + .parent_names = (const char *[]){ "pll0" }, + .num_parents = 1, + .ops = &clk_pll_vote_ops, + }, +}; + static struct clk_pll pll3 = { .l_reg = 0x3164, .m_reg = 0x3168, @@ -154,7 +181,7 @@ static const u8 gcc_pxo_pll8_pll0[] = { static const char *gcc_pxo_pll8_pll0_map[] = { "pxo", "pll8_vote", - "pll0", + "pll0_vote", }; static struct freq_tbl clk_tbl_gsbi_uart[] = { @@ -2133,6 +2160,8 @@ static struct clk_branch usb_fs1_h_clk = { }; static struct clk_regmap *gcc_ipq806x_clks[] = { + [PLL0] = &pll0.clkr, + [PLL0_VOTE] = &pll0_vote, [PLL3] = &pll3.clkr, [PLL8] = &pll8.clkr, [PLL8_VOTE] = &pll8_vote, -- cgit v1.2.3-70-g09d2 From 50c6a50344c58f73c697e2fe38960dc176a2e69f Mon Sep 17 00:00:00 2001 From: Stephen Boyd Date: Thu, 4 Sep 2014 13:21:50 -0700 Subject: clk: qcom: Consolidate frequency finding logic There are two find_freq() functions in clk-rcg.c and clk-rcg2.c that are almost exactly the same. Consolidate them into one function to save on some code space. Cc: Mike Turquette Signed-off-by: Stephen Boyd --- drivers/clk/qcom/clk-rcg.c | 20 ++++---------------- drivers/clk/qcom/clk-rcg2.c | 19 +++---------------- drivers/clk/qcom/common.c | 16 ++++++++++++++++ drivers/clk/qcom/common.h | 4 ++++ 4 files changed, 27 insertions(+), 32 deletions(-) (limited to 'drivers/clk') diff --git a/drivers/clk/qcom/clk-rcg.c b/drivers/clk/qcom/clk-rcg.c index b638c5846db..3db106b7493 100644 --- a/drivers/clk/qcom/clk-rcg.c +++ b/drivers/clk/qcom/clk-rcg.c @@ -21,6 +21,7 @@ #include #include "clk-rcg.h" +#include "common.h" static u32 ns_to_src(struct src_sel *s, u32 ns) { @@ -360,26 +361,13 @@ clk_dyn_rcg_recalc_rate(struct clk_hw *hw, unsigned long parent_rate) } } -static const -struct freq_tbl *find_freq(const struct freq_tbl *f, unsigned long rate) -{ - if (!f) - return NULL; - - for (; f->freq; f++) - if (rate <= f->freq) - return f; - - return NULL; -} - static long _freq_tbl_determine_rate(struct clk_hw *hw, const struct freq_tbl *f, unsigned long rate, unsigned long *p_rate, struct clk **p) { unsigned long clk_flags; - f = find_freq(f, rate); + f = qcom_find_freq(f, rate); if (!f) return -EINVAL; @@ -477,7 +465,7 @@ static int clk_rcg_set_rate(struct clk_hw *hw, unsigned long rate, struct clk_rcg *rcg = to_clk_rcg(hw); const struct freq_tbl *f; - f = find_freq(rcg->freq_tbl, rate); + f = qcom_find_freq(rcg->freq_tbl, rate); if (!f) return -EINVAL; @@ -497,7 +485,7 @@ static int __clk_dyn_rcg_set_rate(struct clk_hw *hw, unsigned long rate) struct clk_dyn_rcg *rcg = to_clk_dyn_rcg(hw); const struct freq_tbl *f; - f = find_freq(rcg->freq_tbl, rate); + f = qcom_find_freq(rcg->freq_tbl, rate); if (!f) return -EINVAL; diff --git a/drivers/clk/qcom/clk-rcg2.c b/drivers/clk/qcom/clk-rcg2.c index cd185d5cc67..cfa9eb4fe9c 100644 --- a/drivers/clk/qcom/clk-rcg2.c +++ b/drivers/clk/qcom/clk-rcg2.c @@ -24,6 +24,7 @@ #include #include "clk-rcg.h" +#include "common.h" #define CMD_REG 0x0 #define CMD_UPDATE BIT(0) @@ -172,27 +173,13 @@ clk_rcg2_recalc_rate(struct clk_hw *hw, unsigned long parent_rate) return calc_rate(parent_rate, m, n, mode, hid_div); } -static const -struct freq_tbl *find_freq(const struct freq_tbl *f, unsigned long rate) -{ - if (!f) - return NULL; - - for (; f->freq; f++) - if (rate <= f->freq) - return f; - - /* Default to our fastest rate */ - return f - 1; -} - static long _freq_tbl_determine_rate(struct clk_hw *hw, const struct freq_tbl *f, unsigned long rate, unsigned long *p_rate, struct clk **p) { unsigned long clk_flags; - f = find_freq(f, rate); + f = qcom_find_freq(f, rate); if (!f) return -EINVAL; @@ -268,7 +255,7 @@ static int __clk_rcg2_set_rate(struct clk_hw *hw, unsigned long rate) struct clk_rcg2 *rcg = to_clk_rcg2(hw); const struct freq_tbl *f; - f = find_freq(rcg->freq_tbl, rate); + f = qcom_find_freq(rcg->freq_tbl, rate); if (!f) return -EINVAL; diff --git a/drivers/clk/qcom/common.c b/drivers/clk/qcom/common.c index eeb3eea01f4..e20d947db3e 100644 --- a/drivers/clk/qcom/common.c +++ b/drivers/clk/qcom/common.c @@ -18,6 +18,7 @@ #include #include "common.h" +#include "clk-rcg.h" #include "clk-regmap.h" #include "reset.h" @@ -27,6 +28,21 @@ struct qcom_cc { struct clk *clks[]; }; +const +struct freq_tbl *qcom_find_freq(const struct freq_tbl *f, unsigned long rate) +{ + if (!f) + return NULL; + + for (; f->freq; f++) + if (rate <= f->freq) + return f; + + /* Default to our fastest rate */ + return f - 1; +} +EXPORT_SYMBOL_GPL(qcom_find_freq); + struct regmap * qcom_cc_map(struct platform_device *pdev, const struct qcom_cc_desc *desc) { diff --git a/drivers/clk/qcom/common.h b/drivers/clk/qcom/common.h index 2765e9d3da9..f519322acdf 100644 --- a/drivers/clk/qcom/common.h +++ b/drivers/clk/qcom/common.h @@ -18,6 +18,7 @@ struct regmap_config; struct clk_regmap; struct qcom_reset_map; struct regmap; +struct freq_tbl; struct qcom_cc_desc { const struct regmap_config *config; @@ -27,6 +28,9 @@ struct qcom_cc_desc { size_t num_resets; }; +extern const struct freq_tbl *qcom_find_freq(const struct freq_tbl *f, + unsigned long rate); + extern struct regmap *qcom_cc_map(struct platform_device *pdev, const struct qcom_cc_desc *desc); extern int qcom_cc_really_probe(struct platform_device *pdev, -- cgit v1.2.3-70-g09d2 From ae3669ac5c09fa8dfc8d8a294ccb5f265b8929be Mon Sep 17 00:00:00 2001 From: Stephen Boyd Date: Mon, 28 Apr 2014 15:58:11 -0700 Subject: clk: qcom: Add support for setting rates on PLLs Some PLLs may require changing their rate at runtime. Add support for these PLLs. Signed-off-by: Stephen Boyd --- drivers/clk/qcom/clk-pll.c | 68 +++++++++++++++++++++++++++++++++++++++++++++- drivers/clk/qcom/clk-pll.h | 20 ++++++++++++++ 2 files changed, 87 insertions(+), 1 deletion(-) (limited to 'drivers/clk') diff --git a/drivers/clk/qcom/clk-pll.c b/drivers/clk/qcom/clk-pll.c index 9db03d3b165..b823bc3b625 100644 --- a/drivers/clk/qcom/clk-pll.c +++ b/drivers/clk/qcom/clk-pll.c @@ -97,7 +97,7 @@ static unsigned long clk_pll_recalc_rate(struct clk_hw *hw, unsigned long parent_rate) { struct clk_pll *pll = to_clk_pll(hw); - u32 l, m, n; + u32 l, m, n, config; unsigned long rate; u64 tmp; @@ -116,13 +116,79 @@ clk_pll_recalc_rate(struct clk_hw *hw, unsigned long parent_rate) do_div(tmp, n); rate += tmp; } + if (pll->post_div_width) { + regmap_read(pll->clkr.regmap, pll->config_reg, &config); + config >>= pll->post_div_shift; + config &= BIT(pll->post_div_width) - 1; + rate /= config + 1; + } + return rate; } +static const +struct pll_freq_tbl *find_freq(const struct pll_freq_tbl *f, unsigned long rate) +{ + if (!f) + return NULL; + + for (; f->freq; f++) + if (rate <= f->freq) + return f; + + return NULL; +} + +static long +clk_pll_determine_rate(struct clk_hw *hw, unsigned long rate, + unsigned long *p_rate, struct clk **p) +{ + struct clk_pll *pll = to_clk_pll(hw); + const struct pll_freq_tbl *f; + + f = find_freq(pll->freq_tbl, rate); + if (!f) + return clk_pll_recalc_rate(hw, *p_rate); + + return f->freq; +} + +static int +clk_pll_set_rate(struct clk_hw *hw, unsigned long rate, unsigned long p_rate) +{ + struct clk_pll *pll = to_clk_pll(hw); + const struct pll_freq_tbl *f; + bool enabled; + u32 mode; + u32 enable_mask = PLL_OUTCTRL | PLL_BYPASSNL | PLL_RESET_N; + + f = find_freq(pll->freq_tbl, rate); + if (!f) + return -EINVAL; + + regmap_read(pll->clkr.regmap, pll->mode_reg, &mode); + enabled = (mode & enable_mask) == enable_mask; + + if (enabled) + clk_pll_disable(hw); + + regmap_update_bits(pll->clkr.regmap, pll->l_reg, 0x3ff, f->l); + regmap_update_bits(pll->clkr.regmap, pll->m_reg, 0x7ffff, f->m); + regmap_update_bits(pll->clkr.regmap, pll->n_reg, 0x7ffff, f->n); + regmap_write(pll->clkr.regmap, pll->config_reg, f->ibits); + + if (enabled) + clk_pll_enable(hw); + + return 0; +} + const struct clk_ops clk_pll_ops = { .enable = clk_pll_enable, .disable = clk_pll_disable, .recalc_rate = clk_pll_recalc_rate, + .determine_rate = clk_pll_determine_rate, + .set_rate = clk_pll_set_rate, }; EXPORT_SYMBOL_GPL(clk_pll_ops); diff --git a/drivers/clk/qcom/clk-pll.h b/drivers/clk/qcom/clk-pll.h index 3003e996247..c9c0cda306d 100644 --- a/drivers/clk/qcom/clk-pll.h +++ b/drivers/clk/qcom/clk-pll.h @@ -17,6 +17,21 @@ #include #include "clk-regmap.h" +/** + * struct pll_freq_tbl - PLL frequency table + * @l: L value + * @m: M value + * @n: N value + * @ibits: internal values + */ +struct pll_freq_tbl { + unsigned long freq; + u16 l; + u16 m; + u16 n; + u32 ibits; +}; + /** * struct clk_pll - phase locked loop (PLL) * @l_reg: L register @@ -26,6 +41,7 @@ * @mode_reg: mode register * @status_reg: status register * @status_bit: ANDed with @status_reg to determine if PLL is enabled + * @freq_tbl: PLL frequency table * @hw: handle between common and hardware-specific interfaces */ struct clk_pll { @@ -36,6 +52,10 @@ struct clk_pll { u32 mode_reg; u32 status_reg; u8 status_bit; + u8 post_div_width; + u8 post_div_shift; + + const struct pll_freq_tbl *freq_tbl; struct clk_regmap clkr; }; -- cgit v1.2.3-70-g09d2 From 229fd4a505553c3a475b90e9aa8e452f5d78eb3b Mon Sep 17 00:00:00 2001 From: Stephen Boyd Date: Mon, 28 Apr 2014 15:59:16 -0700 Subject: clk: qcom: Add support for banked MD RCGs The banked MD RCGs in global clock control have a different register layout than the ones implemented in multimedia clock control. Add support for these types of clocks so we can change the rates of the UBI32 clocks. Signed-off-by: Stephen Boyd --- drivers/clk/qcom/clk-rcg.c | 99 ++++++++++++++++++++++------------------- drivers/clk/qcom/clk-rcg.h | 6 ++- drivers/clk/qcom/mmcc-msm8960.c | 28 +++++++++--- 3 files changed, 77 insertions(+), 56 deletions(-) (limited to 'drivers/clk') diff --git a/drivers/clk/qcom/clk-rcg.c b/drivers/clk/qcom/clk-rcg.c index 3db106b7493..b6e6959e89a 100644 --- a/drivers/clk/qcom/clk-rcg.c +++ b/drivers/clk/qcom/clk-rcg.c @@ -68,16 +68,16 @@ static u8 clk_dyn_rcg_get_parent(struct clk_hw *hw) { struct clk_dyn_rcg *rcg = to_clk_dyn_rcg(hw); int num_parents = __clk_get_num_parents(hw->clk); - u32 ns, ctl; + u32 ns, reg; int bank; int i; struct src_sel *s; - regmap_read(rcg->clkr.regmap, rcg->clkr.enable_reg, &ctl); - bank = reg_to_bank(rcg, ctl); + regmap_read(rcg->clkr.regmap, rcg->bank_reg, ®); + bank = reg_to_bank(rcg, reg); s = &rcg->s[bank]; - regmap_read(rcg->clkr.regmap, rcg->ns_reg, &ns); + regmap_read(rcg->clkr.regmap, rcg->ns_reg[bank], &ns); ns = ns_to_src(s, ns); for (i = 0; i < num_parents; i++) @@ -193,90 +193,93 @@ static u32 mn_to_reg(struct mn *mn, u32 m, u32 n, u32 val) static void configure_bank(struct clk_dyn_rcg *rcg, const struct freq_tbl *f) { - u32 ns, md, ctl, *regp; + u32 ns, md, reg; int bank, new_bank; struct mn *mn; struct pre_div *p; struct src_sel *s; bool enabled; - u32 md_reg; - u32 bank_reg; + u32 md_reg, ns_reg; bool banked_mn = !!rcg->mn[1].width; + bool banked_p = !!rcg->p[1].pre_div_width; struct clk_hw *hw = &rcg->clkr.hw; enabled = __clk_is_enabled(hw->clk); - regmap_read(rcg->clkr.regmap, rcg->ns_reg, &ns); - regmap_read(rcg->clkr.regmap, rcg->clkr.enable_reg, &ctl); - - if (banked_mn) { - regp = &ctl; - bank_reg = rcg->clkr.enable_reg; - } else { - regp = &ns; - bank_reg = rcg->ns_reg; - } - - bank = reg_to_bank(rcg, *regp); + regmap_read(rcg->clkr.regmap, rcg->bank_reg, ®); + bank = reg_to_bank(rcg, reg); new_bank = enabled ? !bank : bank; + ns_reg = rcg->ns_reg[new_bank]; + regmap_read(rcg->clkr.regmap, ns_reg, &ns); + if (banked_mn) { mn = &rcg->mn[new_bank]; md_reg = rcg->md_reg[new_bank]; ns |= BIT(mn->mnctr_reset_bit); - regmap_write(rcg->clkr.regmap, rcg->ns_reg, ns); + regmap_write(rcg->clkr.regmap, ns_reg, ns); regmap_read(rcg->clkr.regmap, md_reg, &md); md = mn_to_md(mn, f->m, f->n, md); regmap_write(rcg->clkr.regmap, md_reg, md); ns = mn_to_ns(mn, f->m, f->n, ns); - regmap_write(rcg->clkr.regmap, rcg->ns_reg, ns); + regmap_write(rcg->clkr.regmap, ns_reg, ns); - ctl = mn_to_reg(mn, f->m, f->n, ctl); - regmap_write(rcg->clkr.regmap, rcg->clkr.enable_reg, ctl); + /* Two NS registers means mode control is in NS register */ + if (rcg->ns_reg[0] != rcg->ns_reg[1]) { + ns = mn_to_reg(mn, f->m, f->n, ns); + regmap_write(rcg->clkr.regmap, ns_reg, ns); + } else { + reg = mn_to_reg(mn, f->m, f->n, reg); + regmap_write(rcg->clkr.regmap, rcg->bank_reg, reg); + } ns &= ~BIT(mn->mnctr_reset_bit); - regmap_write(rcg->clkr.regmap, rcg->ns_reg, ns); - } else { + regmap_write(rcg->clkr.regmap, ns_reg, ns); + } + + if (banked_p) { p = &rcg->p[new_bank]; ns = pre_div_to_ns(p, f->pre_div - 1, ns); } s = &rcg->s[new_bank]; ns = src_to_ns(s, s->parent_map[f->src], ns); - regmap_write(rcg->clkr.regmap, rcg->ns_reg, ns); + regmap_write(rcg->clkr.regmap, ns_reg, ns); if (enabled) { - *regp ^= BIT(rcg->mux_sel_bit); - regmap_write(rcg->clkr.regmap, bank_reg, *regp); + regmap_read(rcg->clkr.regmap, rcg->bank_reg, ®); + reg ^= BIT(rcg->mux_sel_bit); + regmap_write(rcg->clkr.regmap, rcg->bank_reg, reg); } } static int clk_dyn_rcg_set_parent(struct clk_hw *hw, u8 index) { struct clk_dyn_rcg *rcg = to_clk_dyn_rcg(hw); - u32 ns, ctl, md, reg; + u32 ns, md, reg; int bank; struct freq_tbl f = { 0 }; bool banked_mn = !!rcg->mn[1].width; + bool banked_p = !!rcg->p[1].pre_div_width; - regmap_read(rcg->clkr.regmap, rcg->ns_reg, &ns); - regmap_read(rcg->clkr.regmap, rcg->clkr.enable_reg, &ctl); - reg = banked_mn ? ctl : ns; - + regmap_read(rcg->clkr.regmap, rcg->bank_reg, ®); bank = reg_to_bank(rcg, reg); + regmap_read(rcg->clkr.regmap, rcg->ns_reg[bank], &ns); + if (banked_mn) { regmap_read(rcg->clkr.regmap, rcg->md_reg[bank], &md); f.m = md_to_m(&rcg->mn[bank], md); f.n = ns_m_to_n(&rcg->mn[bank], ns, f.m); - } else { - f.pre_div = ns_to_pre_div(&rcg->p[bank], ns) + 1; } - f.src = index; + if (banked_p) + f.pre_div = ns_to_pre_div(&rcg->p[bank], ns) + 1; + + f.src = index; configure_bank(rcg, &f); return 0; @@ -337,28 +340,30 @@ clk_dyn_rcg_recalc_rate(struct clk_hw *hw, unsigned long parent_rate) u32 m, n, pre_div, ns, md, mode, reg; int bank; struct mn *mn; + bool banked_p = !!rcg->p[1].pre_div_width; bool banked_mn = !!rcg->mn[1].width; - regmap_read(rcg->clkr.regmap, rcg->ns_reg, &ns); - - if (banked_mn) - regmap_read(rcg->clkr.regmap, rcg->clkr.enable_reg, ®); - else - reg = ns; - + regmap_read(rcg->clkr.regmap, rcg->bank_reg, ®); bank = reg_to_bank(rcg, reg); + regmap_read(rcg->clkr.regmap, rcg->ns_reg[bank], &ns); + m = n = pre_div = mode = 0; + if (banked_mn) { mn = &rcg->mn[bank]; regmap_read(rcg->clkr.regmap, rcg->md_reg[bank], &md); m = md_to_m(mn, md); n = ns_m_to_n(mn, ns, m); + /* Two NS registers means mode control is in NS register */ + if (rcg->ns_reg[0] != rcg->ns_reg[1]) + reg = ns; mode = reg_to_mnctr_mode(mn, reg); - return calc_rate(parent_rate, m, n, mode, 0); - } else { - pre_div = ns_to_pre_div(&rcg->p[bank], ns); - return calc_rate(parent_rate, 0, 0, 0, pre_div); } + + if (banked_p) + pre_div = ns_to_pre_div(&rcg->p[bank], ns); + + return calc_rate(parent_rate, m, n, mode, pre_div); } static long _freq_tbl_determine_rate(struct clk_hw *hw, diff --git a/drivers/clk/qcom/clk-rcg.h b/drivers/clk/qcom/clk-rcg.h index ba0523cefd2..687e41f91d7 100644 --- a/drivers/clk/qcom/clk-rcg.h +++ b/drivers/clk/qcom/clk-rcg.h @@ -103,8 +103,9 @@ extern const struct clk_ops clk_rcg_bypass_ops; * struct clk_dyn_rcg - root clock generator with glitch free mux * * @mux_sel_bit: bit to switch glitch free mux - * @ns_reg: NS register + * @ns_reg: NS0 and NS1 register * @md_reg: MD0 and MD1 register + * @bank_reg: register to XOR @mux_sel_bit into to switch glitch free mux * @mn: mn counter (banked) * @s: source selector (banked) * @freq_tbl: frequency table @@ -113,8 +114,9 @@ extern const struct clk_ops clk_rcg_bypass_ops; * */ struct clk_dyn_rcg { - u32 ns_reg; + u32 ns_reg[2]; u32 md_reg[2]; + u32 bank_reg; u8 mux_sel_bit; diff --git a/drivers/clk/qcom/mmcc-msm8960.c b/drivers/clk/qcom/mmcc-msm8960.c index 2e80a219b8e..775e00dbcbc 100644 --- a/drivers/clk/qcom/mmcc-msm8960.c +++ b/drivers/clk/qcom/mmcc-msm8960.c @@ -773,9 +773,11 @@ static struct freq_tbl clk_tbl_gfx2d[] = { }; static struct clk_dyn_rcg gfx2d0_src = { - .ns_reg = 0x0070, + .ns_reg[0] = 0x0070, + .ns_reg[1] = 0x0070, .md_reg[0] = 0x0064, .md_reg[1] = 0x0068, + .bank_reg = 0x0060, .mn[0] = { .mnctr_en_bit = 8, .mnctr_reset_bit = 25, @@ -831,9 +833,11 @@ static struct clk_branch gfx2d0_clk = { }; static struct clk_dyn_rcg gfx2d1_src = { - .ns_reg = 0x007c, + .ns_reg[0] = 0x007c, + .ns_reg[1] = 0x007c, .md_reg[0] = 0x0078, .md_reg[1] = 0x006c, + .bank_reg = 0x0074, .mn[0] = { .mnctr_en_bit = 8, .mnctr_reset_bit = 25, @@ -930,9 +934,11 @@ static struct freq_tbl clk_tbl_gfx3d_8064[] = { }; static struct clk_dyn_rcg gfx3d_src = { - .ns_reg = 0x008c, + .ns_reg[0] = 0x008c, + .ns_reg[1] = 0x008c, .md_reg[0] = 0x0084, .md_reg[1] = 0x0088, + .bank_reg = 0x0080, .mn[0] = { .mnctr_en_bit = 8, .mnctr_reset_bit = 25, @@ -1006,9 +1012,11 @@ static struct freq_tbl clk_tbl_vcap[] = { }; static struct clk_dyn_rcg vcap_src = { - .ns_reg = 0x021c, + .ns_reg[0] = 0x021c, + .ns_reg[1] = 0x021c, .md_reg[0] = 0x01ec, .md_reg[1] = 0x0218, + .bank_reg = 0x0178, .mn[0] = { .mnctr_en_bit = 8, .mnctr_reset_bit = 23, @@ -1211,9 +1219,11 @@ static struct freq_tbl clk_tbl_mdp[] = { }; static struct clk_dyn_rcg mdp_src = { - .ns_reg = 0x00d0, + .ns_reg[0] = 0x00d0, + .ns_reg[1] = 0x00d0, .md_reg[0] = 0x00c4, .md_reg[1] = 0x00c8, + .bank_reg = 0x00c0, .mn[0] = { .mnctr_en_bit = 8, .mnctr_reset_bit = 31, @@ -1318,7 +1328,9 @@ static struct freq_tbl clk_tbl_rot[] = { }; static struct clk_dyn_rcg rot_src = { - .ns_reg = 0x00e8, + .ns_reg[0] = 0x00e8, + .ns_reg[1] = 0x00e8, + .bank_reg = 0x00e8, .p[0] = { .pre_div_shift = 22, .pre_div_width = 4, @@ -1542,9 +1554,11 @@ static struct freq_tbl clk_tbl_vcodec[] = { }; static struct clk_dyn_rcg vcodec_src = { - .ns_reg = 0x0100, + .ns_reg[0] = 0x0100, + .ns_reg[1] = 0x0100, .md_reg[0] = 0x00fc, .md_reg[1] = 0x0128, + .bank_reg = 0x00f8, .mn[0] = { .mnctr_en_bit = 5, .mnctr_reset_bit = 31, -- cgit v1.2.3-70-g09d2 From fa0111be4ff30150720db3c3e5ee8d7823921639 Mon Sep 17 00:00:00 2001 From: Thomas Abraham Date: Wed, 30 Jul 2014 13:25:32 +0530 Subject: clk: samsung: exynos4: remove duplicate div_core2 divider clock instantiation The 'div_core2' clock and the 'arm_clk' divider clocks are instances of the same divider clock. So remove the 'arm_clk' clock instance. Signed-off-by: Thomas Abraham [tomasz.figa@gmail.com: Fixed remaining occurences of 'arm_clk'.] Signed-off-by: Tomasz Figa --- drivers/clk/samsung/clk-exynos4.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) (limited to 'drivers/clk') diff --git a/drivers/clk/samsung/clk-exynos4.c b/drivers/clk/samsung/clk-exynos4.c index b0c660b484e..940f02837b8 100644 --- a/drivers/clk/samsung/clk-exynos4.c +++ b/drivers/clk/samsung/clk-exynos4.c @@ -517,7 +517,7 @@ static struct samsung_fixed_factor_clock exynos4_fixed_factor_clks[] __initdata FFACTOR(0, "sclk_apll_div_2", "sclk_apll", 1, 2, 0), FFACTOR(0, "fout_mpll_div_2", "fout_mpll", 1, 2, 0), FFACTOR(0, "fout_apll_div_2", "fout_apll", 1, 2, 0), - FFACTOR(0, "arm_clk_div_2", "arm_clk", 1, 2, 0), + FFACTOR(0, "arm_clk_div_2", "div_core2", 1, 2, 0), }; static struct samsung_fixed_factor_clock exynos4210_fixed_factor_clks[] __initdata = { @@ -719,7 +719,7 @@ static struct samsung_div_clock exynos4_div_clks[] __initdata = { DIV(0, "div_periph", "div_core2", DIV_CPU0, 12, 3), DIV(0, "div_atb", "mout_core", DIV_CPU0, 16, 3), DIV(0, "div_pclk_dbg", "div_atb", DIV_CPU0, 20, 3), - DIV(0, "div_core2", "div_core", DIV_CPU0, 28, 3), + DIV(CLK_ARM_CLK, "div_core2", "div_core", DIV_CPU0, 28, 3), DIV(0, "div_copy", "mout_hpm", DIV_CPU1, 0, 3), DIV(0, "div_hpm", "div_copy", DIV_CPU1, 4, 3), DIV(0, "div_clkout_cpu", "mout_clkout_cpu", CLKOUT_CMU_CPU, 8, 6), @@ -768,7 +768,6 @@ static struct samsung_div_clock exynos4_div_clks[] __initdata = { DIV(0, "div_spi_pre2", "div_spi2", DIV_PERIL2, 8, 8), DIV(0, "div_audio1", "mout_audio1", DIV_PERIL4, 0, 4), DIV(0, "div_audio2", "mout_audio2", DIV_PERIL4, 16, 4), - DIV(CLK_ARM_CLK, "arm_clk", "div_core2", DIV_CPU0, 28, 3), DIV(CLK_SCLK_APLL, "sclk_apll", "mout_apll", DIV_CPU0, 24, 3), DIV_F(0, "div_mipi_pre0", "div_mipi0", DIV_LCD0, 20, 4, CLK_SET_RATE_PARENT, 0), @@ -1485,7 +1484,7 @@ static void __init exynos4_clk_init(struct device_node *np, exynos4_soc == EXYNOS4210 ? "Exynos4210" : "Exynos4x12", _get_rate("sclk_apll"), _get_rate("sclk_mpll"), _get_rate("sclk_epll"), _get_rate("sclk_vpll"), - _get_rate("arm_clk")); + _get_rate("div_core2")); } -- cgit v1.2.3-70-g09d2 From f9c0d14062e235ef11c9d5e776ebc7a05894f299 Mon Sep 17 00:00:00 2001 From: Mark yao Date: Fri, 12 Sep 2014 17:24:46 +0800 Subject: clk: rockchip: rk3288: fix softreset register count The rk3288 actually has 12 softresets, so fix the register count. Signed-off-by: Mark yao Reviewed-by: Heiko Stuebner Reviewed-by: Doug Anderson Signed-off-by: Mike Turquette --- drivers/clk/rockchip/clk-rk3288.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/clk') diff --git a/drivers/clk/rockchip/clk-rk3288.c b/drivers/clk/rockchip/clk-rk3288.c index 0d8c6c59a75..2e1d790df9b 100644 --- a/drivers/clk/rockchip/clk-rk3288.c +++ b/drivers/clk/rockchip/clk-rk3288.c @@ -711,7 +711,7 @@ static void __init rk3288_clk_init(struct device_node *np) rockchip_clk_register_branches(rk3288_clk_branches, ARRAY_SIZE(rk3288_clk_branches)); - rockchip_register_softrst(np, 9, reg_base + RK3288_SOFTRST_CON(0), + rockchip_register_softrst(np, 12, reg_base + RK3288_SOFTRST_CON(0), ROCKCHIP_SOFTRST_HIWORD_MASK); } CLK_OF_DECLARE(rk3288_cru, "rockchip,rk3288-cru", rk3288_clk_init); -- cgit v1.2.3-70-g09d2 From d1a559a1cb1d4aa1c63c56bdb39d9d18dfaf9523 Mon Sep 17 00:00:00 2001 From: Heiko Stübner Date: Wed, 24 Sep 2014 23:41:54 +0200 Subject: clk: rockchip: add missing rk3288 npll rate table The npll on rk3288 is exactly the same pll type as the other 4. Yet it was missing the link to the rate table, making rate changes impossible. Change that by setting the table. Signed-off-by: Heiko Stuebner Reviewed-by: Doug Anderson Tested-by: Doug Anderson Tested-by: Kever Yang Signed-off-by: Mike Turquette --- drivers/clk/rockchip/clk-rk3288.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/clk') diff --git a/drivers/clk/rockchip/clk-rk3288.c b/drivers/clk/rockchip/clk-rk3288.c index 2e1d790df9b..dcd3fac6439 100644 --- a/drivers/clk/rockchip/clk-rk3288.c +++ b/drivers/clk/rockchip/clk-rk3288.c @@ -143,7 +143,7 @@ static struct rockchip_pll_clock rk3288_pll_clks[] __initdata = { [gpll] = PLL(pll_rk3066, PLL_GPLL, "gpll", mux_pll_p, 0, RK3288_PLL_CON(12), RK3288_MODE_CON, 12, 8, rk3288_pll_rates), [npll] = PLL(pll_rk3066, PLL_NPLL, "npll", mux_pll_p, 0, RK3288_PLL_CON(16), - RK3288_MODE_CON, 14, 9, NULL), + RK3288_MODE_CON, 14, 9, rk3288_pll_rates), }; static struct clk_div_table div_hclk_cpu_t[] = { -- cgit v1.2.3-70-g09d2 From 89d83e14f44c37c46fc1880a0768da1a77b682c7 Mon Sep 17 00:00:00 2001 From: Kever Yang Date: Thu, 25 Sep 2014 15:48:46 +0800 Subject: clk: rockchip: use the clock id for nodes init This patch use the new defined clock ID to initial the clock nodes. Signed-off-by: Kever Yang Reviewed-by: Doug Anderson Reviewed-by: Heiko Stuebner Signed-off-by: Mike Turquette --- drivers/clk/rockchip/clk-rk3288.c | 68 +++++++++++++++++++-------------------- 1 file changed, 34 insertions(+), 34 deletions(-) (limited to 'drivers/clk') diff --git a/drivers/clk/rockchip/clk-rk3288.c b/drivers/clk/rockchip/clk-rk3288.c index dcd3fac6439..3dfc5e3a074 100644 --- a/drivers/clk/rockchip/clk-rk3288.c +++ b/drivers/clk/rockchip/clk-rk3288.c @@ -219,12 +219,12 @@ static struct rockchip_clk_branch rk3288_clk_branches[] __initdata = { RK3288_CLKSEL_CON(1), 15, 1, MFLAGS, 3, 5, DFLAGS), DIV(0, "aclk_cpu_pre", "aclk_cpu_src", 0, RK3288_CLKSEL_CON(1), 0, 3, DFLAGS), - GATE(0, "aclk_cpu", "aclk_cpu_pre", 0, + GATE(ACLK_CPU, "aclk_cpu", "aclk_cpu_pre", 0, RK3288_CLKGATE_CON(0), 3, GFLAGS), - COMPOSITE_NOMUX(0, "pclk_cpu", "aclk_cpu_pre", 0, + COMPOSITE_NOMUX(PCLK_CPU, "pclk_cpu", "aclk_cpu_pre", 0, RK3288_CLKSEL_CON(1), 12, 3, DFLAGS, RK3288_CLKGATE_CON(0), 5, GFLAGS), - COMPOSITE_NOMUX_DIVTBL(0, "hclk_cpu", "aclk_cpu_pre", 0, + COMPOSITE_NOMUX_DIVTBL(HCLK_CPU, "hclk_cpu", "aclk_cpu_pre", 0, RK3288_CLKSEL_CON(1), 8, 2, DFLAGS, div_hclk_cpu_t, RK3288_CLKGATE_CON(0), 4, GFLAGS), GATE(0, "c2c_host", "aclk_cpu_src", 0, @@ -309,7 +309,7 @@ static struct rockchip_clk_branch rk3288_clk_branches[] __initdata = { COMPOSITE(0, "aclk_rga_pre", mux_pll_src_cpll_gpll_usb480m_p, 0, RK3288_CLKSEL_CON(30), 6, 2, MFLAGS, 0, 5, DFLAGS, RK3288_CLKGATE_CON(3), 5, GFLAGS), - COMPOSITE(0, "sclk_rga", mux_pll_src_cpll_gpll_usb480m_p, 0, + COMPOSITE(SCLK_RGA, "sclk_rga", mux_pll_src_cpll_gpll_usb480m_p, 0, RK3288_CLKSEL_CON(30), 14, 2, MFLAGS, 8, 5, DFLAGS, RK3288_CLKGATE_CON(3), 4, GFLAGS), @@ -320,35 +320,35 @@ static struct rockchip_clk_branch rk3288_clk_branches[] __initdata = { RK3288_CLKSEL_CON(29), 6, 2, MFLAGS, 8, 8, DFLAGS, RK3288_CLKGATE_CON(3), 3, GFLAGS), - COMPOSITE_NODIV(0, "sclk_edp_24m", mux_edp_24m_p, 0, + COMPOSITE_NODIV(SCLK_EDP_24M, "sclk_edp_24m", mux_edp_24m_p, 0, RK3288_CLKSEL_CON(28), 15, 1, MFLAGS, RK3288_CLKGATE_CON(3), 12, GFLAGS), - COMPOSITE(0, "sclk_edp", mux_pll_src_cpll_gpll_npll_p, 0, + COMPOSITE(SCLK_EDP, "sclk_edp", mux_pll_src_cpll_gpll_npll_p, 0, RK3288_CLKSEL_CON(28), 6, 2, MFLAGS, 0, 6, DFLAGS, RK3288_CLKGATE_CON(3), 13, GFLAGS), - COMPOSITE(0, "sclk_isp", mux_pll_src_cpll_gpll_npll_p, 0, + COMPOSITE(SCLK_ISP, "sclk_isp", mux_pll_src_cpll_gpll_npll_p, 0, RK3288_CLKSEL_CON(6), 6, 2, MFLAGS, 0, 6, DFLAGS, RK3288_CLKGATE_CON(3), 14, GFLAGS), - COMPOSITE(0, "sclk_isp_jpe", mux_pll_src_cpll_gpll_npll_p, 0, + COMPOSITE(SCLK_ISP_JPE, "sclk_isp_jpe", mux_pll_src_cpll_gpll_npll_p, 0, RK3288_CLKSEL_CON(6), 14, 2, MFLAGS, 8, 6, DFLAGS, RK3288_CLKGATE_CON(3), 15, GFLAGS), - GATE(0, "sclk_hdmi_hdcp", "xin24m", 0, + GATE(SCLK_HDMI_HDCP, "sclk_hdmi_hdcp", "xin24m", 0, RK3288_CLKGATE_CON(5), 12, GFLAGS), - GATE(0, "sclk_hdmi_cec", "xin32k", 0, + GATE(SCLK_HDMI_CEC, "sclk_hdmi_cec", "xin32k", 0, RK3288_CLKGATE_CON(5), 11, GFLAGS), - COMPOSITE(0, "aclk_hevc", mux_pll_src_cpll_gpll_npll_p, 0, + COMPOSITE(ACLK_HEVC, "aclk_hevc", mux_pll_src_cpll_gpll_npll_p, 0, RK3288_CLKSEL_CON(39), 14, 2, MFLAGS, 8, 5, DFLAGS, RK3288_CLKGATE_CON(13), 13, GFLAGS), - DIV(0, "hclk_hevc", "aclk_hevc", 0, + DIV(HCLK_HEVC, "hclk_hevc", "aclk_hevc", 0, RK3288_CLKSEL_CON(40), 12, 2, DFLAGS), - COMPOSITE(0, "sclk_hevc_cabac", mux_pll_src_cpll_gpll_npll_p, 0, + COMPOSITE(SCLK_HEVC_CABAC, "sclk_hevc_cabac", mux_pll_src_cpll_gpll_npll_p, 0, RK3288_CLKSEL_CON(42), 6, 2, MFLAGS, 0, 5, DFLAGS, RK3288_CLKGATE_CON(13), 14, GFLAGS), - COMPOSITE(0, "sclk_hevc_core", mux_pll_src_cpll_gpll_npll_p, 0, + COMPOSITE(SCLK_HEVC_CORE, "sclk_hevc_core", mux_pll_src_cpll_gpll_npll_p, 0, RK3288_CLKSEL_CON(42), 14, 2, MFLAGS, 8, 5, DFLAGS, RK3288_CLKGATE_CON(13), 15, GFLAGS), @@ -371,13 +371,13 @@ static struct rockchip_clk_branch rk3288_clk_branches[] __initdata = { COMPOSITE(0, "aclk_peri_src", mux_pll_src_cpll_gpll_p, 0, RK3288_CLKSEL_CON(10), 15, 1, MFLAGS, 0, 5, DFLAGS, RK3288_CLKGATE_CON(2), 0, GFLAGS), - COMPOSITE_NOMUX(0, "pclk_peri", "aclk_peri_src", 0, + COMPOSITE_NOMUX(PCLK_PERI, "pclk_peri", "aclk_peri_src", 0, RK3288_CLKSEL_CON(10), 12, 2, DFLAGS | CLK_DIVIDER_POWER_OF_TWO, RK3288_CLKGATE_CON(2), 3, GFLAGS), - COMPOSITE_NOMUX(0, "hclk_peri", "aclk_peri_src", 0, + COMPOSITE_NOMUX(HCLK_PERI, "hclk_peri", "aclk_peri_src", 0, RK3288_CLKSEL_CON(10), 8, 2, DFLAGS | CLK_DIVIDER_POWER_OF_TWO, RK3288_CLKGATE_CON(2), 2, GFLAGS), - GATE(0, "aclk_peri", "aclk_peri_src", 0, + GATE(ACLK_PERI, "aclk_peri", "aclk_peri_src", 0, RK3288_CLKGATE_CON(2), 1, GFLAGS), /* @@ -643,34 +643,34 @@ static struct rockchip_clk_branch rk3288_clk_branches[] __initdata = { GATE(HCLK_RGA, "hclk_rga", "hclk_vio", 0, RK3288_CLKGATE_CON(15), 1, GFLAGS), GATE(HCLK_VOP0, "hclk_vop0", "hclk_vio", 0, RK3288_CLKGATE_CON(15), 6, GFLAGS), GATE(HCLK_VOP1, "hclk_vop1", "hclk_vio", 0, RK3288_CLKGATE_CON(15), 8, GFLAGS), - GATE(0, "hclk_vio_ahb_arbi", "hclk_vio", 0, RK3288_CLKGATE_CON(15), 9, GFLAGS), - GATE(0, "hclk_vio_niu", "hclk_vio", 0, RK3288_CLKGATE_CON(15), 10, GFLAGS), - GATE(0, "hclk_vip", "hclk_vio", 0, RK3288_CLKGATE_CON(15), 15, GFLAGS), + GATE(HCLK_VIO_AHB_ARBI, "hclk_vio_ahb_arbi", "hclk_vio", 0, RK3288_CLKGATE_CON(15), 9, GFLAGS), + GATE(HCLK_VIO_NIU, "hclk_vio_niu", "hclk_vio", 0, RK3288_CLKGATE_CON(15), 10, GFLAGS), + GATE(HCLK_VIP, "hclk_vip", "hclk_vio", 0, RK3288_CLKGATE_CON(15), 15, GFLAGS), GATE(HCLK_IEP, "hclk_iep", "hclk_vio", 0, RK3288_CLKGATE_CON(15), 3, GFLAGS), GATE(HCLK_ISP, "hclk_isp", "hclk_vio", 0, RK3288_CLKGATE_CON(16), 1, GFLAGS), - GATE(0, "hclk_vio2_h2p", "hclk_vio", 0, RK3288_CLKGATE_CON(16), 10, GFLAGS), - GATE(0, "pclk_mipi_dsi0", "hclk_vio", 0, RK3288_CLKGATE_CON(16), 4, GFLAGS), - GATE(0, "pclk_mipi_dsi1", "hclk_vio", 0, RK3288_CLKGATE_CON(16), 5, GFLAGS), - GATE(0, "pclk_mipi_csi", "hclk_vio", 0, RK3288_CLKGATE_CON(16), 6, GFLAGS), - GATE(0, "pclk_lvds_phy", "hclk_vio", 0, RK3288_CLKGATE_CON(16), 7, GFLAGS), - GATE(0, "pclk_edp_ctrl", "hclk_vio", 0, RK3288_CLKGATE_CON(16), 8, GFLAGS), - GATE(0, "pclk_hdmi_ctrl", "hclk_vio", 0, RK3288_CLKGATE_CON(16), 9, GFLAGS), - GATE(0, "pclk_vio2_h2p", "hclk_vio", 0, RK3288_CLKGATE_CON(16), 11, GFLAGS), + GATE(HCLK_VIO2_H2P, "hclk_vio2_h2p", "hclk_vio", 0, RK3288_CLKGATE_CON(16), 10, GFLAGS), + GATE(PCLK_MIPI_DSI0, "pclk_mipi_dsi0", "hclk_vio", 0, RK3288_CLKGATE_CON(16), 4, GFLAGS), + GATE(PCLK_MIPI_DSI1, "pclk_mipi_dsi1", "hclk_vio", 0, RK3288_CLKGATE_CON(16), 5, GFLAGS), + GATE(PCLK_MIPI_CSI, "pclk_mipi_csi", "hclk_vio", 0, RK3288_CLKGATE_CON(16), 6, GFLAGS), + GATE(PCLK_LVDS_PHY, "pclk_lvds_phy", "hclk_vio", 0, RK3288_CLKGATE_CON(16), 7, GFLAGS), + GATE(PCLK_EDP_CTRL, "pclk_edp_ctrl", "hclk_vio", 0, RK3288_CLKGATE_CON(16), 8, GFLAGS), + GATE(PCLK_HDMI_CTRL, "pclk_hdmi_ctrl", "hclk_vio", 0, RK3288_CLKGATE_CON(16), 9, GFLAGS), + GATE(PCLK_VIO2_H2P, "pclk_vio2_h2p", "hclk_vio", 0, RK3288_CLKGATE_CON(16), 11, GFLAGS), /* aclk_vio0 gates */ GATE(ACLK_VOP0, "aclk_vop0", "aclk_vio0", 0, RK3288_CLKGATE_CON(15), 5, GFLAGS), - GATE(0, "aclk_iep", "aclk_vio0", 0, RK3288_CLKGATE_CON(15), 2, GFLAGS), - GATE(0, "aclk_vio0_niu", "aclk_vio0", 0, RK3288_CLKGATE_CON(15), 11, GFLAGS), - GATE(0, "aclk_vip", "aclk_vio0", 0, RK3288_CLKGATE_CON(15), 14, GFLAGS), + GATE(ACLK_IEP, "aclk_iep", "aclk_vio0", 0, RK3288_CLKGATE_CON(15), 2, GFLAGS), + GATE(ACLK_VIO0_NIU, "aclk_vio0_niu", "aclk_vio0", 0, RK3288_CLKGATE_CON(15), 11, GFLAGS), + GATE(ACLK_VIP, "aclk_vip", "aclk_vio0", 0, RK3288_CLKGATE_CON(15), 14, GFLAGS), /* aclk_vio1 gates */ GATE(ACLK_VOP1, "aclk_vop1", "aclk_vio1", 0, RK3288_CLKGATE_CON(15), 7, GFLAGS), - GATE(0, "aclk_isp", "aclk_vio1", 0, RK3288_CLKGATE_CON(16), 2, GFLAGS), - GATE(0, "aclk_vio1_niu", "aclk_vio1", 0, RK3288_CLKGATE_CON(15), 12, GFLAGS), + GATE(ACLK_ISP, "aclk_isp", "aclk_vio1", 0, RK3288_CLKGATE_CON(16), 2, GFLAGS), + GATE(ACLK_VIO1_NIU, "aclk_vio1_niu", "aclk_vio1", 0, RK3288_CLKGATE_CON(15), 12, GFLAGS), /* aclk_rga_pre gates */ GATE(ACLK_RGA, "aclk_rga", "aclk_rga_pre", 0, RK3288_CLKGATE_CON(15), 0, GFLAGS), - GATE(0, "aclk_rga_niu", "aclk_rga_pre", 0, RK3288_CLKGATE_CON(15), 13, GFLAGS), + GATE(ACLK_RGA_NIU, "aclk_rga_niu", "aclk_rga_pre", 0, RK3288_CLKGATE_CON(15), 13, GFLAGS), /* * Other ungrouped clocks. -- cgit v1.2.3-70-g09d2 From cd248502927fa5b4a700433675c4ff4a2bbee14b Mon Sep 17 00:00:00 2001 From: Kever Yang Date: Thu, 25 Sep 2014 15:48:47 +0800 Subject: clk: rockchip: add clock node in PD_VIDEO This patch add the clock node in PD_VIDEO Signed-off-by: Kever Yang Reviewed-by: Heiko Stuebner Reviewed-by: Doug Anderson Tested-by: Doug Anderson Signed-off-by: Mike Turquette --- drivers/clk/rockchip/clk-rk3288.c | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) (limited to 'drivers/clk') diff --git a/drivers/clk/rockchip/clk-rk3288.c b/drivers/clk/rockchip/clk-rk3288.c index 3dfc5e3a074..35c3297d05b 100644 --- a/drivers/clk/rockchip/clk-rk3288.c +++ b/drivers/clk/rockchip/clk-rk3288.c @@ -296,6 +296,20 @@ static struct rockchip_clk_branch rk3288_clk_branches[] __initdata = { COMPOSITE(0, "aclk_vdpu", mux_pll_src_cpll_gpll_usb480m_p, 0, RK3288_CLKSEL_CON(32), 14, 2, MFLAGS, 8, 5, DFLAGS, RK3288_CLKGATE_CON(3), 11, GFLAGS), + /* + * We use aclk_vdpu by default GRF_SOC_CON0[7] setting in system, + * so we ignore the mux and make clocks nodes as following, + */ + GATE(ACLK_VCODEC, "aclk_vcodec", "aclk_vdpu", 0, + RK3288_CLKGATE_CON(9), 0, GFLAGS), + /* + * We introduce a virtul node of hclk_vodec_pre_v to split one clock + * struct with a gate and a fix divider into two node in software. + */ + GATE(0, "hclk_vcodec_pre_v", "aclk_vdpu", 0, + RK3288_CLKGATE_CON(3), 10, GFLAGS), + GATE(HCLK_VCODEC, "hclk_vcodec", "hclk_vcodec_pre", 0, + RK3288_CLKGATE_CON(9), 1, GFLAGS), COMPOSITE(0, "aclk_vio0", mux_pll_src_cpll_gpll_usb480m_p, 0, RK3288_CLKSEL_CON(31), 6, 2, MFLAGS, 0, 5, DFLAGS, @@ -705,6 +719,12 @@ static void __init rk3288_clk_init(struct device_node *np) pr_warn("%s: could not register clock usb480m: %ld\n", __func__, PTR_ERR(clk)); + clk = clk_register_fixed_factor(NULL, "hclk_vcodec_pre", + "hclk_vcodec_pre_v", 0, 1, 4); + if (IS_ERR(clk)) + pr_warn("%s: could not register clock hclk_vcodec_pre: %ld\n", + __func__, PTR_ERR(clk)); + rockchip_clk_register_plls(rk3288_pll_clks, ARRAY_SIZE(rk3288_pll_clks), RK3288_GRF_SOC_STATUS); -- cgit v1.2.3-70-g09d2 From 59c0621d4d5fa4faeb8a0cdd0cfe27c13fdd09b2 Mon Sep 17 00:00:00 2001 From: Kiran Padwal Date: Wed, 24 Sep 2014 15:15:29 +0530 Subject: clk: Remove .owner field for driver There is no need to init .owner field. Based on the patch from Peter Griffin "mmc: remove .owner field for drivers using module_platform_driver" This patch removes the superflous .owner field for drivers which use the module_platform_driver API, as this is overriden in platform_driver_register anyway." Signed-off-by: Kiran Padwal Signed-off-by: Mike Turquette --- drivers/clk/clk-axi-clkgen.c | 1 - drivers/clk/clk-max77686.c | 1 - drivers/clk/clk-max77802.c | 1 - drivers/clk/clk-palmas.c | 1 - drivers/clk/clk-twl6040.c | 1 - drivers/clk/clk-wm831x.c | 1 - drivers/clk/qcom/mmcc-apq8084.c | 1 - drivers/clk/qcom/mmcc-msm8960.c | 1 - drivers/clk/qcom/mmcc-msm8974.c | 1 - drivers/clk/samsung/clk-s3c2410-dclk.c | 1 - drivers/clk/sunxi/clk-sun6i-apb0-gates.c | 1 - drivers/clk/sunxi/clk-sun6i-apb0.c | 1 - drivers/clk/sunxi/clk-sun6i-ar100.c | 1 - drivers/clk/sunxi/clk-sun8i-apb0.c | 1 - drivers/clk/ti/clk-dra7-atl.c | 1 - 15 files changed, 15 deletions(-) (limited to 'drivers/clk') diff --git a/drivers/clk/clk-axi-clkgen.c b/drivers/clk/clk-axi-clkgen.c index 1127ee46b80..e619285c6de 100644 --- a/drivers/clk/clk-axi-clkgen.c +++ b/drivers/clk/clk-axi-clkgen.c @@ -544,7 +544,6 @@ static int axi_clkgen_remove(struct platform_device *pdev) static struct platform_driver axi_clkgen_driver = { .driver = { .name = "adi-axi-clkgen", - .owner = THIS_MODULE, .of_match_table = axi_clkgen_ids, }, .probe = axi_clkgen_probe, diff --git a/drivers/clk/clk-max77686.c b/drivers/clk/clk-max77686.c index ed0beb4cb39..86cdb3a2862 100644 --- a/drivers/clk/clk-max77686.c +++ b/drivers/clk/clk-max77686.c @@ -73,7 +73,6 @@ MODULE_DEVICE_TABLE(platform, max77686_clk_id); static struct platform_driver max77686_clk_driver = { .driver = { .name = "max77686-clk", - .owner = THIS_MODULE, }, .probe = max77686_clk_probe, .remove = max77686_clk_remove, diff --git a/drivers/clk/clk-max77802.c b/drivers/clk/clk-max77802.c index 8e480c5c294..0729dc723a8 100644 --- a/drivers/clk/clk-max77802.c +++ b/drivers/clk/clk-max77802.c @@ -84,7 +84,6 @@ MODULE_DEVICE_TABLE(platform, max77802_clk_id); static struct platform_driver max77802_clk_driver = { .driver = { .name = "max77802-clk", - .owner = THIS_MODULE, }, .probe = max77802_clk_probe, .remove = max77802_clk_remove, diff --git a/drivers/clk/clk-palmas.c b/drivers/clk/clk-palmas.c index 781630e1372..8d459923a15 100644 --- a/drivers/clk/clk-palmas.c +++ b/drivers/clk/clk-palmas.c @@ -292,7 +292,6 @@ static int palmas_clks_remove(struct platform_device *pdev) static struct platform_driver palmas_clks_driver = { .driver = { .name = "palmas-clk", - .owner = THIS_MODULE, .of_match_table = palmas_clks_of_match, }, .probe = palmas_clks_probe, diff --git a/drivers/clk/clk-twl6040.c b/drivers/clk/clk-twl6040.c index 1ada79a2805..4a755135bcd 100644 --- a/drivers/clk/clk-twl6040.c +++ b/drivers/clk/clk-twl6040.c @@ -112,7 +112,6 @@ static int twl6040_clk_remove(struct platform_device *pdev) static struct platform_driver twl6040_clk_driver = { .driver = { .name = "twl6040-clk", - .owner = THIS_MODULE, }, .probe = twl6040_clk_probe, .remove = twl6040_clk_remove, diff --git a/drivers/clk/clk-wm831x.c b/drivers/clk/clk-wm831x.c index b131041c8f4..ef67719f4e5 100644 --- a/drivers/clk/clk-wm831x.c +++ b/drivers/clk/clk-wm831x.c @@ -395,7 +395,6 @@ static struct platform_driver wm831x_clk_driver = { .probe = wm831x_clk_probe, .driver = { .name = "wm831x-clk", - .owner = THIS_MODULE, }, }; diff --git a/drivers/clk/qcom/mmcc-apq8084.c b/drivers/clk/qcom/mmcc-apq8084.c index 751eea376a2..dab988ab8cf 100644 --- a/drivers/clk/qcom/mmcc-apq8084.c +++ b/drivers/clk/qcom/mmcc-apq8084.c @@ -3341,7 +3341,6 @@ static struct platform_driver mmcc_apq8084_driver = { .remove = mmcc_apq8084_remove, .driver = { .name = "mmcc-apq8084", - .owner = THIS_MODULE, .of_match_table = mmcc_apq8084_match_table, }, }; diff --git a/drivers/clk/qcom/mmcc-msm8960.c b/drivers/clk/qcom/mmcc-msm8960.c index 2e80a219b8e..68da36cd7ed 100644 --- a/drivers/clk/qcom/mmcc-msm8960.c +++ b/drivers/clk/qcom/mmcc-msm8960.c @@ -2679,7 +2679,6 @@ static struct platform_driver mmcc_msm8960_driver = { .remove = mmcc_msm8960_remove, .driver = { .name = "mmcc-msm8960", - .owner = THIS_MODULE, .of_match_table = mmcc_msm8960_match_table, }, }; diff --git a/drivers/clk/qcom/mmcc-msm8974.c b/drivers/clk/qcom/mmcc-msm8974.c index bc8f519c47a..be94c54a9a4 100644 --- a/drivers/clk/qcom/mmcc-msm8974.c +++ b/drivers/clk/qcom/mmcc-msm8974.c @@ -2570,7 +2570,6 @@ static struct platform_driver mmcc_msm8974_driver = { .remove = mmcc_msm8974_remove, .driver = { .name = "mmcc-msm8974", - .owner = THIS_MODULE, .of_match_table = mmcc_msm8974_match_table, }, }; diff --git a/drivers/clk/samsung/clk-s3c2410-dclk.c b/drivers/clk/samsung/clk-s3c2410-dclk.c index 0449cc0458e..f4f29ed6bd2 100644 --- a/drivers/clk/samsung/clk-s3c2410-dclk.c +++ b/drivers/clk/samsung/clk-s3c2410-dclk.c @@ -426,7 +426,6 @@ MODULE_DEVICE_TABLE(platform, s3c24xx_dclk_driver_ids); static struct platform_driver s3c24xx_dclk_driver = { .driver = { .name = "s3c24xx-dclk", - .owner = THIS_MODULE, .pm = &s3c24xx_dclk_pm_ops, }, .probe = s3c24xx_dclk_probe, diff --git a/drivers/clk/sunxi/clk-sun6i-apb0-gates.c b/drivers/clk/sunxi/clk-sun6i-apb0-gates.c index e10d0521ec7..64f3e46d383 100644 --- a/drivers/clk/sunxi/clk-sun6i-apb0-gates.c +++ b/drivers/clk/sunxi/clk-sun6i-apb0-gates.c @@ -99,7 +99,6 @@ static int sun6i_a31_apb0_gates_clk_probe(struct platform_device *pdev) static struct platform_driver sun6i_a31_apb0_gates_clk_driver = { .driver = { .name = "sun6i-a31-apb0-gates-clk", - .owner = THIS_MODULE, .of_match_table = sun6i_a31_apb0_gates_clk_dt_ids, }, .probe = sun6i_a31_apb0_gates_clk_probe, diff --git a/drivers/clk/sunxi/clk-sun6i-apb0.c b/drivers/clk/sunxi/clk-sun6i-apb0.c index 1fa23371c8c..70763600aea 100644 --- a/drivers/clk/sunxi/clk-sun6i-apb0.c +++ b/drivers/clk/sunxi/clk-sun6i-apb0.c @@ -65,7 +65,6 @@ static const struct of_device_id sun6i_a31_apb0_clk_dt_ids[] = { static struct platform_driver sun6i_a31_apb0_clk_driver = { .driver = { .name = "sun6i-a31-apb0-clk", - .owner = THIS_MODULE, .of_match_table = sun6i_a31_apb0_clk_dt_ids, }, .probe = sun6i_a31_apb0_clk_probe, diff --git a/drivers/clk/sunxi/clk-sun6i-ar100.c b/drivers/clk/sunxi/clk-sun6i-ar100.c index eca8ca025b6..acca53290be 100644 --- a/drivers/clk/sunxi/clk-sun6i-ar100.c +++ b/drivers/clk/sunxi/clk-sun6i-ar100.c @@ -221,7 +221,6 @@ static const struct of_device_id sun6i_a31_ar100_clk_dt_ids[] = { static struct platform_driver sun6i_a31_ar100_clk_driver = { .driver = { .name = "sun6i-a31-ar100-clk", - .owner = THIS_MODULE, .of_match_table = sun6i_a31_ar100_clk_dt_ids, }, .probe = sun6i_a31_ar100_clk_probe, diff --git a/drivers/clk/sunxi/clk-sun8i-apb0.c b/drivers/clk/sunxi/clk-sun8i-apb0.c index 1f5ba9b4b8c..155d0022194 100644 --- a/drivers/clk/sunxi/clk-sun8i-apb0.c +++ b/drivers/clk/sunxi/clk-sun8i-apb0.c @@ -56,7 +56,6 @@ static const struct of_device_id sun8i_a23_apb0_clk_dt_ids[] = { static struct platform_driver sun8i_a23_apb0_clk_driver = { .driver = { .name = "sun8i-a23-apb0-clk", - .owner = THIS_MODULE, .of_match_table = sun8i_a23_apb0_clk_dt_ids, }, .probe = sun8i_a23_apb0_clk_probe, diff --git a/drivers/clk/ti/clk-dra7-atl.c b/drivers/clk/ti/clk-dra7-atl.c index af29359677d..990e1d9edc0 100644 --- a/drivers/clk/ti/clk-dra7-atl.c +++ b/drivers/clk/ti/clk-dra7-atl.c @@ -301,7 +301,6 @@ MODULE_DEVICE_TABLE(of, of_dra7_atl_clk_match_tbl); static struct platform_driver dra7_atl_clk_driver = { .driver = { .name = "dra7-atl", - .owner = THIS_MODULE, .of_match_table = of_dra7_atl_clk_match_tbl, }, .probe = of_dra7_atl_clk_probe, -- cgit v1.2.3-70-g09d2 From c873d14d30b838a516a94967242322d4b73e79e7 Mon Sep 17 00:00:00 2001 From: Jyri Sarha Date: Fri, 5 Sep 2014 15:21:34 +0300 Subject: clk: add gpio gated clock The added gpio-gate-clock is a basic clock that can be enabled and disabled trough a gpio output. The DT binding document for the clock is also added. For EPROBE_DEFER handling the registering of the clock has to be delayed until of_clk_get() call time. Signed-off-by: Jyri Sarha Signed-off-by: Mike Turquette --- .../devicetree/bindings/clock/gpio-gate-clock.txt | 21 +++ drivers/clk/Makefile | 1 + drivers/clk/clk-gpio-gate.c | 204 +++++++++++++++++++++ include/linux/clk-provider.h | 22 +++ 4 files changed, 248 insertions(+) create mode 100644 Documentation/devicetree/bindings/clock/gpio-gate-clock.txt create mode 100644 drivers/clk/clk-gpio-gate.c (limited to 'drivers/clk') diff --git a/Documentation/devicetree/bindings/clock/gpio-gate-clock.txt b/Documentation/devicetree/bindings/clock/gpio-gate-clock.txt new file mode 100644 index 00000000000..d3379ff9b84 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/gpio-gate-clock.txt @@ -0,0 +1,21 @@ +Binding for simple gpio gated clock. + +This binding uses the common clock binding[1]. + +[1] Documentation/devicetree/bindings/clock/clock-bindings.txt + +Required properties: +- compatible : shall be "gpio-gate-clock". +- #clock-cells : from common clock binding; shall be set to 0. +- enable-gpios : GPIO reference for enabling and disabling the clock. + +Optional properties: +- clocks: Maximum of one parent clock is supported. + +Example: + clock { + compatible = "gpio-gate-clock"; + clocks = <&parentclk>; + #clock-cells = <0>; + enable-gpios = <&gpio 1 GPIO_ACTIVE_HIGH>; + }; diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile index 27c542ba9e7..92a7f6c0239 100644 --- a/drivers/clk/Makefile +++ b/drivers/clk/Makefile @@ -9,6 +9,7 @@ obj-$(CONFIG_COMMON_CLK) += clk-gate.o obj-$(CONFIG_COMMON_CLK) += clk-mux.o obj-$(CONFIG_COMMON_CLK) += clk-composite.o obj-$(CONFIG_COMMON_CLK) += clk-fractional-divider.o +obj-$(CONFIG_COMMON_CLK) += clk-gpio-gate.o ifeq ($(CONFIG_OF), y) obj-$(CONFIG_COMMON_CLK) += clk-conf.o endif diff --git a/drivers/clk/clk-gpio-gate.c b/drivers/clk/clk-gpio-gate.c new file mode 100644 index 00000000000..9dde8853368 --- /dev/null +++ b/drivers/clk/clk-gpio-gate.c @@ -0,0 +1,204 @@ +/* + * Copyright (C) 2013 - 2014 Texas Instruments Incorporated - http://www.ti.com + * Author: Jyri Sarha + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Gpio gated clock implementation + */ + +#include +#include +#include +#include +#include +#include +#include + +/** + * DOC: basic gpio gated clock which can be enabled and disabled + * with gpio output + * Traits of this clock: + * prepare - clk_(un)prepare only ensures parent is (un)prepared + * enable - clk_enable and clk_disable are functional & control gpio + * rate - inherits rate from parent. No clk_set_rate support + * parent - fixed parent. No clk_set_parent support + */ + +#define to_clk_gpio(_hw) container_of(_hw, struct clk_gpio, hw) + +static int clk_gpio_gate_enable(struct clk_hw *hw) +{ + struct clk_gpio *clk = to_clk_gpio(hw); + + gpiod_set_value(clk->gpiod, 1); + + return 0; +} + +static void clk_gpio_gate_disable(struct clk_hw *hw) +{ + struct clk_gpio *clk = to_clk_gpio(hw); + + gpiod_set_value(clk->gpiod, 0); +} + +static int clk_gpio_gate_is_enabled(struct clk_hw *hw) +{ + struct clk_gpio *clk = to_clk_gpio(hw); + + return gpiod_get_value(clk->gpiod); +} + +const struct clk_ops clk_gpio_gate_ops = { + .enable = clk_gpio_gate_enable, + .disable = clk_gpio_gate_disable, + .is_enabled = clk_gpio_gate_is_enabled, +}; +EXPORT_SYMBOL_GPL(clk_gpio_gate_ops); + +/** + * clk_register_gpio - register a gpip clock with the clock framework + * @dev: device that is registering this clock + * @name: name of this clock + * @parent_name: name of this clock's parent + * @gpiod: gpio descriptor to gate this clock + */ +struct clk *clk_register_gpio_gate(struct device *dev, const char *name, + const char *parent_name, struct gpio_desc *gpiod, + unsigned long flags) +{ + struct clk_gpio *clk_gpio = NULL; + struct clk *clk = ERR_PTR(-EINVAL); + struct clk_init_data init = { NULL }; + unsigned long gpio_flags; + int err; + + if (gpiod_is_active_low(gpiod)) + gpio_flags = GPIOF_OUT_INIT_HIGH; + else + gpio_flags = GPIOF_OUT_INIT_LOW; + + if (dev) + err = devm_gpio_request_one(dev, desc_to_gpio(gpiod), + gpio_flags, name); + else + err = gpio_request_one(desc_to_gpio(gpiod), gpio_flags, name); + + if (err) { + pr_err("%s: %s: Error requesting clock control gpio %u\n", + __func__, name, desc_to_gpio(gpiod)); + return ERR_PTR(err); + } + + if (dev) + clk_gpio = devm_kzalloc(dev, sizeof(struct clk_gpio), + GFP_KERNEL); + else + clk_gpio = kzalloc(sizeof(struct clk_gpio), GFP_KERNEL); + + if (!clk_gpio) { + clk = ERR_PTR(-ENOMEM); + goto clk_register_gpio_gate_err; + } + + init.name = name; + init.ops = &clk_gpio_gate_ops; + init.flags = flags | CLK_IS_BASIC; + init.parent_names = (parent_name ? &parent_name : NULL); + init.num_parents = (parent_name ? 1 : 0); + + clk_gpio->gpiod = gpiod; + clk_gpio->hw.init = &init; + + clk = clk_register(dev, &clk_gpio->hw); + + if (!IS_ERR(clk)) + return clk; + + if (!dev) + kfree(clk_gpio); + +clk_register_gpio_gate_err: + gpiod_put(gpiod); + + return clk; +} +EXPORT_SYMBOL_GPL(clk_register_gpio_gate); + +#ifdef CONFIG_OF +/** + * The clk_register_gpio_gate has to be delayed, because the EPROBE_DEFER + * can not be handled properly at of_clk_init() call time. + */ + +struct clk_gpio_gate_delayed_register_data { + struct device_node *node; + struct mutex lock; + struct clk *clk; +}; + +static struct clk *of_clk_gpio_gate_delayed_register_get( + struct of_phandle_args *clkspec, + void *_data) +{ + struct clk_gpio_gate_delayed_register_data *data = _data; + struct clk *clk; + const char *clk_name = data->node->name; + const char *parent_name; + struct gpio_desc *gpiod; + int gpio; + + mutex_lock(&data->lock); + + if (data->clk) { + mutex_unlock(&data->lock); + return data->clk; + } + + gpio = of_get_named_gpio_flags(data->node, "enable-gpios", 0, NULL); + if (gpio < 0) { + mutex_unlock(&data->lock); + if (gpio != -EPROBE_DEFER) + pr_err("%s: %s: Can't get 'enable-gpios' DT property\n", + __func__, clk_name); + return ERR_PTR(gpio); + } + gpiod = gpio_to_desc(gpio); + + parent_name = of_clk_get_parent_name(data->node, 0); + + clk = clk_register_gpio_gate(NULL, clk_name, parent_name, gpiod, 0); + if (IS_ERR(clk)) { + mutex_unlock(&data->lock); + return clk; + } + + data->clk = clk; + mutex_unlock(&data->lock); + + return clk; +} + +/** + * of_gpio_gate_clk_setup() - Setup function for gpio controlled clock + */ +void __init of_gpio_gate_clk_setup(struct device_node *node) +{ + struct clk_gpio_gate_delayed_register_data *data; + + data = kzalloc(sizeof(struct clk_gpio_gate_delayed_register_data), + GFP_KERNEL); + if (!data) + return; + + data->node = node; + mutex_init(&data->lock); + + of_clk_add_provider(node, of_clk_gpio_gate_delayed_register_get, data); +} +EXPORT_SYMBOL_GPL(of_gpio_gate_clk_setup); +CLK_OF_DECLARE(gpio_gate_clk, "gpio-gate-clock", of_gpio_gate_clk_setup); +#endif diff --git a/include/linux/clk-provider.h b/include/linux/clk-provider.h index 411dd7eb265..ec1581bd94c 100644 --- a/include/linux/clk-provider.h +++ b/include/linux/clk-provider.h @@ -488,6 +488,28 @@ struct clk *clk_register_composite(struct device *dev, const char *name, struct clk_hw *gate_hw, const struct clk_ops *gate_ops, unsigned long flags); +/*** + * struct clk_gpio_gate - gpio gated clock + * + * @hw: handle between common and hardware-specific interfaces + * @gpiod: gpio descriptor + * + * Clock with a gpio control for enabling and disabling the parent clock. + * Implements .enable, .disable and .is_enabled + */ + +struct clk_gpio { + struct clk_hw hw; + struct gpio_desc *gpiod; +}; + +extern const struct clk_ops clk_gpio_gate_ops; +struct clk *clk_register_gpio_gate(struct device *dev, const char *name, + const char *parent_name, struct gpio_desc *gpio, + unsigned long flags); + +void of_gpio_clk_gate_setup(struct device_node *node); + /** * clk_register - allocate a new clock, register it and return an opaque cookie * @dev: device that is registering this clock -- cgit v1.2.3-70-g09d2 From e59c5371fb9d8268d1c043172e88cecab9dc934f Mon Sep 17 00:00:00 2001 From: Mike Turquette Date: Tue, 18 Feb 2014 21:21:25 -0800 Subject: clk: introduce clk_set_phase function & callback A common operation for a clock signal generator is to shift the phase of that signal. This patch introduces a new function to the clk.h API to dynamically adjust the phase of a clock signal. Additionally this patch introduces support for the new function in the common clock framework via the .set_phase call back in struct clk_ops. Signed-off-by: Mike Turquette Signed-off-by: Maxime Ripard Reviewed-by: Heiko Stuebner Acked-by: Hans de Goede --- drivers/clk/clk.c | 85 +++++++++++++++++++++++++++++++++++++++++--- include/linux/clk-private.h | 1 + include/linux/clk-provider.h | 5 +++ include/linux/clk.h | 29 +++++++++++++++ 4 files changed, 116 insertions(+), 4 deletions(-) (limited to 'drivers/clk') diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c index b76fa69b44c..d87661af0c7 100644 --- a/drivers/clk/clk.c +++ b/drivers/clk/clk.c @@ -117,11 +117,11 @@ static void clk_summary_show_one(struct seq_file *s, struct clk *c, int level) if (!c) return; - seq_printf(s, "%*s%-*s %11d %12d %11lu %10lu\n", + seq_printf(s, "%*s%-*s %11d %12d %11lu %10lu %-3d\n", level * 3 + 1, "", 30 - level * 3, c->name, c->enable_count, c->prepare_count, clk_get_rate(c), - clk_get_accuracy(c)); + clk_get_accuracy(c), clk_get_phase(c)); } static void clk_summary_show_subtree(struct seq_file *s, struct clk *c, @@ -143,8 +143,8 @@ static int clk_summary_show(struct seq_file *s, void *data) struct clk *c; struct hlist_head **lists = (struct hlist_head **)s->private; - seq_puts(s, " clock enable_cnt prepare_cnt rate accuracy\n"); - seq_puts(s, "--------------------------------------------------------------------------------\n"); + seq_puts(s, " clock enable_cnt prepare_cnt rate accuracy phase\n"); + seq_puts(s, "----------------------------------------------------------------------------------------\n"); clk_prepare_lock(); @@ -180,6 +180,7 @@ static void clk_dump_one(struct seq_file *s, struct clk *c, int level) seq_printf(s, "\"prepare_count\": %d,", c->prepare_count); seq_printf(s, "\"rate\": %lu", clk_get_rate(c)); seq_printf(s, "\"accuracy\": %lu", clk_get_accuracy(c)); + seq_printf(s, "\"phase\": %d", clk_get_phase(c)); } static void clk_dump_subtree(struct seq_file *s, struct clk *c, int level) @@ -264,6 +265,11 @@ static int clk_debug_create_one(struct clk *clk, struct dentry *pdentry) if (!d) goto err_out; + d = debugfs_create_u32("clk_phase", S_IRUGO, clk->dentry, + (u32 *)&clk->phase); + if (!d) + goto err_out; + d = debugfs_create_x32("clk_flags", S_IRUGO, clk->dentry, (u32 *)&clk->flags); if (!d) @@ -1738,6 +1744,77 @@ out: } EXPORT_SYMBOL_GPL(clk_set_parent); +/** + * clk_set_phase - adjust the phase shift of a clock signal + * @clk: clock signal source + * @degrees: number of degrees the signal is shifted + * + * Shifts the phase of a clock signal by the specified + * degrees. Returns 0 on success, -EERROR otherwise. + * + * This function makes no distinction about the input or reference + * signal that we adjust the clock signal phase against. For example + * phase locked-loop clock signal generators we may shift phase with + * respect to feedback clock signal input, but for other cases the + * clock phase may be shifted with respect to some other, unspecified + * signal. + * + * Additionally the concept of phase shift does not propagate through + * the clock tree hierarchy, which sets it apart from clock rates and + * clock accuracy. A parent clock phase attribute does not have an + * impact on the phase attribute of a child clock. + */ +int clk_set_phase(struct clk *clk, int degrees) +{ + int ret = 0; + + if (!clk) + goto out; + + /* sanity check degrees */ + degrees %= 360; + if (degrees < 0) + degrees += 360; + + clk_prepare_lock(); + + if (!clk->ops->set_phase) + goto out_unlock; + + ret = clk->ops->set_phase(clk->hw, degrees); + + if (!ret) + clk->phase = degrees; + +out_unlock: + clk_prepare_unlock(); + +out: + return ret; +} + +/** + * clk_get_phase - return the phase shift of a clock signal + * @clk: clock signal source + * + * Returns the phase shift of a clock node in degrees, otherwise returns + * -EERROR. + */ +int clk_get_phase(struct clk *clk) +{ + int ret = 0; + + if (!clk) + goto out; + + clk_prepare_lock(); + ret = clk->phase; + clk_prepare_unlock(); + +out: + return ret; +} + /** * __clk_init - initialize the data structures in a struct clk * @dev: device initializing this clk, placeholder for now diff --git a/include/linux/clk-private.h b/include/linux/clk-private.h index efbf70b9fd8..845be30be50 100644 --- a/include/linux/clk-private.h +++ b/include/linux/clk-private.h @@ -46,6 +46,7 @@ struct clk { unsigned int enable_count; unsigned int prepare_count; unsigned long accuracy; + int phase; struct hlist_head children; struct hlist_node child_node; unsigned int notifier_count; diff --git a/include/linux/clk-provider.h b/include/linux/clk-provider.h index 411dd7eb265..201a6195a3e 100644 --- a/include/linux/clk-provider.h +++ b/include/linux/clk-provider.h @@ -129,6 +129,10 @@ struct dentry; * set then clock accuracy will be initialized to parent accuracy * or 0 (perfect clock) if clock has no parent. * + * @set_phase: Shift the phase this clock signal in degrees specified + * by the second argument. Valid values for degrees are + * 0-359. Return 0 on success, otherwise -EERROR. + * * @init: Perform platform-specific initialization magic. * This is not not used by any of the basic clock types. * Please consider other ways of solving initialization problems @@ -177,6 +181,7 @@ struct clk_ops { unsigned long parent_rate, u8 index); unsigned long (*recalc_accuracy)(struct clk_hw *hw, unsigned long parent_accuracy); + int (*set_phase)(struct clk_hw *hw, int degrees); void (*init)(struct clk_hw *hw); int (*debug_init)(struct clk_hw *hw, struct dentry *dentry); }; diff --git a/include/linux/clk.h b/include/linux/clk.h index fb5e097d8f7..38bdedd3e38 100644 --- a/include/linux/clk.h +++ b/include/linux/clk.h @@ -106,6 +106,25 @@ int clk_notifier_unregister(struct clk *clk, struct notifier_block *nb); */ long clk_get_accuracy(struct clk *clk); +/** + * clk_set_phase - adjust the phase shift of a clock signal + * @clk: clock signal source + * @degrees: number of degrees the signal is shifted + * + * Shifts the phase of a clock signal by the specified degrees. Returns 0 on + * success, -EERROR otherwise. + */ +int clk_set_phase(struct clk *clk, int degrees); + +/** + * clk_get_phase - return the phase shift of a clock signal + * @clk: clock signal source + * + * Returns the phase shift of a clock node in degrees, otherwise returns + * -EERROR. + */ +int clk_get_phase(struct clk *clk); + #else static inline long clk_get_accuracy(struct clk *clk) @@ -113,6 +132,16 @@ static inline long clk_get_accuracy(struct clk *clk) return -ENOTSUPP; } +static inline long clk_set_phase(struct clk *clk, int phase) +{ + return -ENOTSUPP; +} + +static inline long clk_get_phase(struct clk *clk) +{ + return -ENOTSUPP; +} + #endif /** -- cgit v1.2.3-70-g09d2 From 9824cf73c3a5e677bee6fcba43c4807e01ff1b4a Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Mon, 14 Jul 2014 13:53:27 +0200 Subject: clk: Add a function to retrieve phase The current phase API doesn't look into the actual hardware to get the phase value, but will rather get it from a variable only set by the set_phase function. This will cause issue when the client driver will never call the set_phase function, where we can end up having a reported phase that will not match what the hardware has been programmed to by the bootloader or what phase is programmed out of reset. Add a new get_phase function for the drivers to implement so that we can get this value. Signed-off-by: Maxime Ripard Reviewed-by: Heiko Stuebner Acked-by: Hans de Goede --- drivers/clk/clk.c | 10 ++++++++++ include/linux/clk-provider.h | 5 +++++ 2 files changed, 15 insertions(+) (limited to 'drivers/clk') diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c index d87661af0c7..113d75db371 100644 --- a/drivers/clk/clk.c +++ b/drivers/clk/clk.c @@ -1933,6 +1933,16 @@ int __clk_init(struct device *dev, struct clk *clk) else clk->accuracy = 0; + /* + * Set clk's phase. + * Since a phase is by definition relative to its parent, just + * query the current clock phase, or just assume it's in phase. + */ + if (clk->ops->get_phase) + clk->phase = clk->ops->get_phase(clk->hw); + else + clk->phase = 0; + /* * Set clk's rate. The preferred method is to use .recalc_rate. For * simple clocks and lazy developers the default fallback is to use the diff --git a/include/linux/clk-provider.h b/include/linux/clk-provider.h index 69b20d4c1e1..abec961092a 100644 --- a/include/linux/clk-provider.h +++ b/include/linux/clk-provider.h @@ -130,6 +130,10 @@ struct dentry; * set then clock accuracy will be initialized to parent accuracy * or 0 (perfect clock) if clock has no parent. * + * @get_phase: Queries the hardware to get the current phase of a clock. + * Returned values are 0-359 degrees on success, negative + * error codes on failure. + * * @set_phase: Shift the phase this clock signal in degrees specified * by the second argument. Valid values for degrees are * 0-359. Return 0 on success, otherwise -EERROR. @@ -182,6 +186,7 @@ struct clk_ops { unsigned long parent_rate, u8 index); unsigned long (*recalc_accuracy)(struct clk_hw *hw, unsigned long parent_accuracy); + int (*get_phase)(struct clk_hw *hw); int (*set_phase)(struct clk_hw *hw, int degrees); void (*init)(struct clk_hw *hw); int (*debug_init)(struct clk_hw *hw, struct dentry *dentry); -- cgit v1.2.3-70-g09d2 From 601da9d0a54c0fea7f5a208bc107d7ef1de4f570 Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Fri, 4 Jul 2014 22:24:52 +0200 Subject: clk: sunxi: factors: Invert the probing logic Until now, the factors clock probing was done directly by sunxi_init_clocks, with the factors registration being called directly with the clocks data passed as an argument. This approch has shown its limits when we added more clocks, since we couldn't really split code with such a logic in smaller files, and led to a huge file having all the clocks. Introduce an intermediate probing function, so that factor clocks will be able to directly be called by CLK_OF_DECLARE, which will in turn ease the split into several files. Signed-off-by: Maxime Ripard Acked-by: Hans de Goede --- drivers/clk/sunxi/clk-factors.c | 101 +++++++++++++++++++++++++++++++++++++--- drivers/clk/sunxi/clk-factors.h | 16 ++++++- drivers/clk/sunxi/clk-sunxi.c | 95 ++----------------------------------- 3 files changed, 113 insertions(+), 99 deletions(-) (limited to 'drivers/clk') diff --git a/drivers/clk/sunxi/clk-factors.c b/drivers/clk/sunxi/clk-factors.c index 2057c8ac648..f83ba097126 100644 --- a/drivers/clk/sunxi/clk-factors.c +++ b/drivers/clk/sunxi/clk-factors.c @@ -9,18 +9,18 @@ */ #include +#include +#include +#include #include +#include #include -#include -#include #include -#include - #include "clk-factors.h" /* - * DOC: basic adjustable factor-based clock that cannot gate + * DOC: basic adjustable factor-based clock * * Traits of this clock: * prepare - clk_prepare only ensures that parents are prepared @@ -32,6 +32,8 @@ #define to_clk_factors(_hw) container_of(_hw, struct clk_factors, hw) +#define FACTORS_MAX_PARENTS 5 + #define SETMASK(len, pos) (((1U << (len)) - 1) << (pos)) #define CLRMASK(len, pos) (~(SETMASK(len, pos))) #define FACTOR_GET(bit, len, reg) (((reg) & SETMASK(len, bit)) >> (bit)) @@ -147,9 +149,96 @@ static int clk_factors_set_rate(struct clk_hw *hw, unsigned long rate, return 0; } -const struct clk_ops clk_factors_ops = { +static const struct clk_ops clk_factors_ops = { .determine_rate = clk_factors_determine_rate, .recalc_rate = clk_factors_recalc_rate, .round_rate = clk_factors_round_rate, .set_rate = clk_factors_set_rate, }; + +struct clk * __init sunxi_factors_register(struct device_node *node, + const struct factors_data *data, + spinlock_t *lock) +{ + struct clk *clk; + struct clk_factors *factors; + struct clk_gate *gate = NULL; + struct clk_mux *mux = NULL; + struct clk_hw *gate_hw = NULL; + struct clk_hw *mux_hw = NULL; + const char *clk_name = node->name; + const char *parents[FACTORS_MAX_PARENTS]; + void __iomem *reg; + int i = 0; + + reg = of_iomap(node, 0); + + /* if we have a mux, we will have >1 parents */ + while (i < FACTORS_MAX_PARENTS && + (parents[i] = of_clk_get_parent_name(node, i)) != NULL) + i++; + + /* + * some factor clocks, such as pll5 and pll6, may have multiple + * outputs, and have their name designated in factors_data + */ + if (data->name) + clk_name = data->name; + else + of_property_read_string(node, "clock-output-names", &clk_name); + + factors = kzalloc(sizeof(struct clk_factors), GFP_KERNEL); + if (!factors) + return NULL; + + /* set up factors properties */ + factors->reg = reg; + factors->config = data->table; + factors->get_factors = data->getter; + factors->lock = lock; + + /* Add a gate if this factor clock can be gated */ + if (data->enable) { + gate = kzalloc(sizeof(struct clk_gate), GFP_KERNEL); + if (!gate) { + kfree(factors); + return NULL; + } + + /* set up gate properties */ + gate->reg = reg; + gate->bit_idx = data->enable; + gate->lock = factors->lock; + gate_hw = &gate->hw; + } + + /* Add a mux if this factor clock can be muxed */ + if (data->mux) { + mux = kzalloc(sizeof(struct clk_mux), GFP_KERNEL); + if (!mux) { + kfree(factors); + kfree(gate); + return NULL; + } + + /* set up gate properties */ + mux->reg = reg; + mux->shift = data->mux; + mux->mask = SUNXI_FACTORS_MUX_MASK; + mux->lock = factors->lock; + mux_hw = &mux->hw; + } + + clk = clk_register_composite(NULL, clk_name, + parents, i, + mux_hw, &clk_mux_ops, + &factors->hw, &clk_factors_ops, + gate_hw, &clk_gate_ops, 0); + + if (!IS_ERR(clk)) { + of_clk_add_provider(node, of_clk_src_simple_get, clk); + clk_register_clkdev(clk, clk_name, NULL); + } + + return clk; +} diff --git a/drivers/clk/sunxi/clk-factors.h b/drivers/clk/sunxi/clk-factors.h index d2d0efa3937..9913840018d 100644 --- a/drivers/clk/sunxi/clk-factors.h +++ b/drivers/clk/sunxi/clk-factors.h @@ -3,9 +3,12 @@ #include #include +#include #define SUNXI_FACTORS_NOT_APPLICABLE (0) +#define SUNXI_FACTORS_MUX_MASK 0x3 + struct clk_factors_config { u8 nshift; u8 nwidth; @@ -18,6 +21,14 @@ struct clk_factors_config { u8 n_start; }; +struct factors_data { + int enable; + int mux; + struct clk_factors_config *table; + void (*getter) (u32 *rate, u32 parent_rate, u8 *n, u8 *k, u8 *m, u8 *p); + const char *name; +}; + struct clk_factors { struct clk_hw hw; void __iomem *reg; @@ -26,5 +37,8 @@ struct clk_factors { spinlock_t *lock; }; -extern const struct clk_ops clk_factors_ops; +struct clk * __init sunxi_factors_register(struct device_node *node, + const struct factors_data *data, + spinlock_t *lock); + #endif diff --git a/drivers/clk/sunxi/clk-sunxi.c b/drivers/clk/sunxi/clk-sunxi.c index 2cf6581329a..393df321010 100644 --- a/drivers/clk/sunxi/clk-sunxi.c +++ b/drivers/clk/sunxi/clk-sunxi.c @@ -19,6 +19,7 @@ #include #include #include +#include #include "clk-factors.h" @@ -440,16 +441,6 @@ EXPORT_SYMBOL(clk_sunxi_mmc_phase_control); * sunxi_factors_clk_setup() - Setup function for factor clocks */ -#define SUNXI_FACTORS_MUX_MASK 0x3 - -struct factors_data { - int enable; - int mux; - struct clk_factors_config *table; - void (*getter) (u32 *rate, u32 parent_rate, u8 *n, u8 *k, u8 *m, u8 *p); - const char *name; -}; - static struct clk_factors_config sun4i_pll1_config = { .nshift = 8, .nwidth = 5, @@ -583,89 +574,9 @@ static const struct factors_data sun7i_a20_out_data __initconst = { }; static struct clk * __init sunxi_factors_clk_setup(struct device_node *node, - const struct factors_data *data) + const struct factors_data *data) { - struct clk *clk; - struct clk_factors *factors; - struct clk_gate *gate = NULL; - struct clk_mux *mux = NULL; - struct clk_hw *gate_hw = NULL; - struct clk_hw *mux_hw = NULL; - const char *clk_name = node->name; - const char *parents[SUNXI_MAX_PARENTS]; - void __iomem *reg; - int i = 0; - - reg = of_iomap(node, 0); - - /* if we have a mux, we will have >1 parents */ - while (i < SUNXI_MAX_PARENTS && - (parents[i] = of_clk_get_parent_name(node, i)) != NULL) - i++; - - /* - * some factor clocks, such as pll5 and pll6, may have multiple - * outputs, and have their name designated in factors_data - */ - if (data->name) - clk_name = data->name; - else - of_property_read_string(node, "clock-output-names", &clk_name); - - factors = kzalloc(sizeof(struct clk_factors), GFP_KERNEL); - if (!factors) - return NULL; - - /* Add a gate if this factor clock can be gated */ - if (data->enable) { - gate = kzalloc(sizeof(struct clk_gate), GFP_KERNEL); - if (!gate) { - kfree(factors); - return NULL; - } - - /* set up gate properties */ - gate->reg = reg; - gate->bit_idx = data->enable; - gate->lock = &clk_lock; - gate_hw = &gate->hw; - } - - /* Add a mux if this factor clock can be muxed */ - if (data->mux) { - mux = kzalloc(sizeof(struct clk_mux), GFP_KERNEL); - if (!mux) { - kfree(factors); - kfree(gate); - return NULL; - } - - /* set up gate properties */ - mux->reg = reg; - mux->shift = data->mux; - mux->mask = SUNXI_FACTORS_MUX_MASK; - mux->lock = &clk_lock; - mux_hw = &mux->hw; - } - - /* set up factors properties */ - factors->reg = reg; - factors->config = data->table; - factors->get_factors = data->getter; - factors->lock = &clk_lock; - - clk = clk_register_composite(NULL, clk_name, - parents, i, - mux_hw, &clk_mux_ops, - &factors->hw, &clk_factors_ops, - gate_hw, &clk_gate_ops, 0); - - if (!IS_ERR(clk)) { - of_clk_add_provider(node, of_clk_src_simple_get, clk); - clk_register_clkdev(clk, clk_name, NULL); - } - - return clk; + return sunxi_factors_register(node, data, &clk_lock); } -- cgit v1.2.3-70-g09d2 From 03e29bbf40ed87657795c774c80449bb86a55415 Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Thu, 10 Jul 2014 23:53:40 +0200 Subject: clk: sunxi: Introduce mbus compatible Even though the mbus clock is a regular module clock, given its nature, it needs to be enabled all the time. Introduce a new compatible, to differentiate it from the other module clocks. Signed-off-by: Maxime Ripard Acked-by: Hans de Goede --- Documentation/devicetree/bindings/clock/sunxi.txt | 1 + drivers/clk/sunxi/clk-sunxi.c | 1 + 2 files changed, 2 insertions(+) (limited to 'drivers/clk') diff --git a/Documentation/devicetree/bindings/clock/sunxi.txt b/Documentation/devicetree/bindings/clock/sunxi.txt index d3a5c3c6d67..b938a990602 100644 --- a/Documentation/devicetree/bindings/clock/sunxi.txt +++ b/Documentation/devicetree/bindings/clock/sunxi.txt @@ -46,6 +46,7 @@ Required properties: "allwinner,sun6i-a31-apb2-div-clk" - for the APB2 gates on A31 "allwinner,sun6i-a31-apb2-gates-clk" - for the APB2 gates on A31 "allwinner,sun8i-a23-apb2-gates-clk" - for the APB2 gates on A23 + "allwinner,sun5i-a13-mbus-clk" - for the MBUS clock on A13 "allwinner,sun4i-a10-mod0-clk" - for the module 0 family of clocks "allwinner,sun7i-a20-out-clk" - for the external output clocks "allwinner,sun7i-a20-gmac-clk" - for the GMAC clock module on A20/A31 diff --git a/drivers/clk/sunxi/clk-sunxi.c b/drivers/clk/sunxi/clk-sunxi.c index 393df321010..17e1e3bec95 100644 --- a/drivers/clk/sunxi/clk-sunxi.c +++ b/drivers/clk/sunxi/clk-sunxi.c @@ -1119,6 +1119,7 @@ static const struct of_device_id clk_factors_match[] __initconst = { {.compatible = "allwinner,sun7i-a20-pll4-clk", .data = &sun7i_a20_pll4_data,}, {.compatible = "allwinner,sun6i-a31-pll6-clk", .data = &sun6i_a31_pll6_data,}, {.compatible = "allwinner,sun4i-a10-apb1-clk", .data = &sun4i_apb1_data,}, + {.compatible = "allwinner,sun5i-a13-mbus-clk", .data = &sun4i_mod0_data,}, {.compatible = "allwinner,sun4i-a10-mod0-clk", .data = &sun4i_mod0_data,}, {.compatible = "allwinner,sun7i-a20-out-clk", .data = &sun7i_a20_out_data,}, {} -- cgit v1.2.3-70-g09d2 From 992a56e48996d4dea6cc25a35e180f696935925d Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Thu, 10 Jul 2014 23:55:18 +0200 Subject: clk: sunxi: Move mod0 clock to a file of its own Since we know have the ability to declare factors clock outside of clk-sunxi, create a new mod0 driver to deal with the mod0 clocks. Signed-off-by: Maxime Ripard Acked-by: Hans de Goede --- drivers/clk/sunxi/Makefile | 1 + drivers/clk/sunxi/clk-mod0.c | 82 +++++++++++++++++++++++++++++++++++++++++++ drivers/clk/sunxi/clk-sunxi.c | 1 - 3 files changed, 83 insertions(+), 1 deletion(-) create mode 100644 drivers/clk/sunxi/clk-mod0.c (limited to 'drivers/clk') diff --git a/drivers/clk/sunxi/Makefile b/drivers/clk/sunxi/Makefile index 6850cba3587..833f086d4a5 100644 --- a/drivers/clk/sunxi/Makefile +++ b/drivers/clk/sunxi/Makefile @@ -5,6 +5,7 @@ obj-y += clk-sunxi.o clk-factors.o obj-y += clk-a10-hosc.o obj-y += clk-a20-gmac.o +obj-y += clk-mod0.o obj-$(CONFIG_MFD_SUN6I_PRCM) += \ clk-sun6i-ar100.o clk-sun6i-apb0.o clk-sun6i-apb0-gates.o \ diff --git a/drivers/clk/sunxi/clk-mod0.c b/drivers/clk/sunxi/clk-mod0.c new file mode 100644 index 00000000000..bce09a84ab4 --- /dev/null +++ b/drivers/clk/sunxi/clk-mod0.c @@ -0,0 +1,82 @@ +/* + * Copyright 2013 Emilio López + * + * Emilio López + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include +#include + +#include "clk-factors.h" + +/** + * sun4i_get_mod0_factors() - calculates m, n factors for MOD0-style clocks + * MOD0 rate is calculated as follows + * rate = (parent_rate >> p) / (m + 1); + */ + +static void sun4i_a10_get_mod0_factors(u32 *freq, u32 parent_rate, + u8 *n, u8 *k, u8 *m, u8 *p) +{ + u8 div, calcm, calcp; + + /* These clocks can only divide, so we will never be able to achieve + * frequencies higher than the parent frequency */ + if (*freq > parent_rate) + *freq = parent_rate; + + div = DIV_ROUND_UP(parent_rate, *freq); + + if (div < 16) + calcp = 0; + else if (div / 2 < 16) + calcp = 1; + else if (div / 4 < 16) + calcp = 2; + else + calcp = 3; + + calcm = DIV_ROUND_UP(div, 1 << calcp); + + *freq = (parent_rate >> calcp) / calcm; + + /* we were called to round the frequency, we can now return */ + if (n == NULL) + return; + + *m = calcm - 1; + *p = calcp; +} + +/* user manual says "n" but it's really "p" */ +static struct clk_factors_config sun4i_a10_mod0_config = { + .mshift = 0, + .mwidth = 4, + .pshift = 16, + .pwidth = 2, +}; + +static const struct factors_data sun4i_a10_mod0_data __initconst = { + .enable = 31, + .mux = 24, + .table = &sun4i_a10_mod0_config, + .getter = sun4i_a10_get_mod0_factors, +}; + +static DEFINE_SPINLOCK(sun4i_a10_mod0_lock); + +static void __init sun4i_a10_mod0_setup(struct device_node *node) +{ + sunxi_factors_register(node, &sun4i_a10_mod0_data, &sun4i_a10_mod0_lock); +} +CLK_OF_DECLARE(sun4i_a10_mod0, "allwinner,sun4i-a10-mod0-clk", sun4i_a10_mod0_setup); diff --git a/drivers/clk/sunxi/clk-sunxi.c b/drivers/clk/sunxi/clk-sunxi.c index 17e1e3bec95..fc554944777 100644 --- a/drivers/clk/sunxi/clk-sunxi.c +++ b/drivers/clk/sunxi/clk-sunxi.c @@ -1120,7 +1120,6 @@ static const struct of_device_id clk_factors_match[] __initconst = { {.compatible = "allwinner,sun6i-a31-pll6-clk", .data = &sun6i_a31_pll6_data,}, {.compatible = "allwinner,sun4i-a10-apb1-clk", .data = &sun4i_apb1_data,}, {.compatible = "allwinner,sun5i-a13-mbus-clk", .data = &sun4i_mod0_data,}, - {.compatible = "allwinner,sun4i-a10-mod0-clk", .data = &sun4i_mod0_data,}, {.compatible = "allwinner,sun7i-a20-out-clk", .data = &sun7i_a20_out_data,}, {} }; -- cgit v1.2.3-70-g09d2 From eaa18f5d0914b0151cefb52e2977a67ef21dfa64 Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Thu, 10 Jul 2014 23:56:11 +0200 Subject: clk: sunxi: Move mbus to mod0 file Move the MBUS clock to the module clocks file. It's pretty trivial, but still requires to enable the clocks to make sure it won't get disabled. Signed-off-by: Maxime Ripard Acked-by: Hans de Goede --- drivers/clk/sunxi/clk-mod0.c | 12 +++++++++ drivers/clk/sunxi/clk-sunxi.c | 57 ------------------------------------------- 2 files changed, 12 insertions(+), 57 deletions(-) (limited to 'drivers/clk') diff --git a/drivers/clk/sunxi/clk-mod0.c b/drivers/clk/sunxi/clk-mod0.c index bce09a84ab4..8a7f7036aea 100644 --- a/drivers/clk/sunxi/clk-mod0.c +++ b/drivers/clk/sunxi/clk-mod0.c @@ -80,3 +80,15 @@ static void __init sun4i_a10_mod0_setup(struct device_node *node) sunxi_factors_register(node, &sun4i_a10_mod0_data, &sun4i_a10_mod0_lock); } CLK_OF_DECLARE(sun4i_a10_mod0, "allwinner,sun4i-a10-mod0-clk", sun4i_a10_mod0_setup); + +static DEFINE_SPINLOCK(sun5i_a13_mbus_lock); + +static void __init sun5i_a13_mbus_setup(struct device_node *node) +{ + struct clk *mbus = sunxi_factors_register(node, &sun4i_a10_mod0_data, &sun5i_a13_mbus_lock); + + /* The MBUS clocks needs to be always enabled */ + __clk_get(mbus); + clk_prepare_enable(mbus); +} +CLK_OF_DECLARE(sun5i_a13_mbus, "allwinner,sun5i-a13-mbus-clk", sun5i_a13_mbus_setup); diff --git a/drivers/clk/sunxi/clk-sunxi.c b/drivers/clk/sunxi/clk-sunxi.c index fc554944777..d5dc951264c 100644 --- a/drivers/clk/sunxi/clk-sunxi.c +++ b/drivers/clk/sunxi/clk-sunxi.c @@ -320,46 +320,6 @@ static void sun4i_get_apb1_factors(u32 *freq, u32 parent_rate, -/** - * sun4i_get_mod0_factors() - calculates m, n factors for MOD0-style clocks - * MOD0 rate is calculated as follows - * rate = (parent_rate >> p) / (m + 1); - */ - -static void sun4i_get_mod0_factors(u32 *freq, u32 parent_rate, - u8 *n, u8 *k, u8 *m, u8 *p) -{ - u8 div, calcm, calcp; - - /* These clocks can only divide, so we will never be able to achieve - * frequencies higher than the parent frequency */ - if (*freq > parent_rate) - *freq = parent_rate; - - div = DIV_ROUND_UP(parent_rate, *freq); - - if (div < 16) - calcp = 0; - else if (div / 2 < 16) - calcp = 1; - else if (div / 4 < 16) - calcp = 2; - else - calcp = 3; - - calcm = DIV_ROUND_UP(div, 1 << calcp); - - *freq = (parent_rate >> calcp) / calcm; - - /* we were called to round the frequency, we can now return */ - if (n == NULL) - return; - - *m = calcm - 1; - *p = calcp; -} - - /** * sun7i_a20_get_out_factors() - calculates m, p factors for CLK_OUT_A/B @@ -494,14 +454,6 @@ static struct clk_factors_config sun4i_apb1_config = { .pwidth = 2, }; -/* user manual says "n" but it's really "p" */ -static struct clk_factors_config sun4i_mod0_config = { - .mshift = 0, - .mwidth = 4, - .pshift = 16, - .pwidth = 2, -}; - /* user manual says "n" but it's really "p" */ static struct clk_factors_config sun7i_a20_out_config = { .mshift = 8, @@ -559,13 +511,6 @@ static const struct factors_data sun4i_apb1_data __initconst = { .getter = sun4i_get_apb1_factors, }; -static const struct factors_data sun4i_mod0_data __initconst = { - .enable = 31, - .mux = 24, - .table = &sun4i_mod0_config, - .getter = sun4i_get_mod0_factors, -}; - static const struct factors_data sun7i_a20_out_data __initconst = { .enable = 31, .mux = 24, @@ -1119,7 +1064,6 @@ static const struct of_device_id clk_factors_match[] __initconst = { {.compatible = "allwinner,sun7i-a20-pll4-clk", .data = &sun7i_a20_pll4_data,}, {.compatible = "allwinner,sun6i-a31-pll6-clk", .data = &sun6i_a31_pll6_data,}, {.compatible = "allwinner,sun4i-a10-apb1-clk", .data = &sun4i_apb1_data,}, - {.compatible = "allwinner,sun5i-a13-mbus-clk", .data = &sun4i_mod0_data,}, {.compatible = "allwinner,sun7i-a20-out-clk", .data = &sun7i_a20_out_data,}, {} }; @@ -1231,7 +1175,6 @@ static void __init sun4i_a10_init_clocks(struct device_node *node) CLK_OF_DECLARE(sun4i_a10_clk_init, "allwinner,sun4i-a10", sun4i_a10_init_clocks); static const char *sun5i_critical_clocks[] __initdata = { - "mbus", "pll5_ddr", "ahb_sdram", }; -- cgit v1.2.3-70-g09d2 From 37e1041f04717d726931c8688cbf425071aeb9c1 Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Fri, 11 Jul 2014 18:43:18 +0200 Subject: clk: sunxi: mod0: Introduce MMC proper phase handling The MMC clock we thought we had until now are actually not one but three different clocks. The main one is unchanged, and will have three outputs: - The clock fed into the MMC - a sample and output clocks, to deal with when should we output/sample data to/from the MMC bus The phase control we had are actually controlling the two latter clocks, but the main MMC one is unchanged. We can adjust the phase with a 3 bits value, from 0 to 7, 0 meaning a 180 phase shift, and the other values being the number of periods from the MMC parent clock to outphase the clock of. Signed-off-by: Maxime Ripard Acked-by: Hans de Goede --- Documentation/devicetree/bindings/clock/sunxi.txt | 2 + drivers/clk/sunxi/clk-mod0.c | 189 ++++++++++++++++++++++ 2 files changed, 191 insertions(+) (limited to 'drivers/clk') diff --git a/Documentation/devicetree/bindings/clock/sunxi.txt b/Documentation/devicetree/bindings/clock/sunxi.txt index b938a990602..eb690ed92a5 100644 --- a/Documentation/devicetree/bindings/clock/sunxi.txt +++ b/Documentation/devicetree/bindings/clock/sunxi.txt @@ -47,6 +47,8 @@ Required properties: "allwinner,sun6i-a31-apb2-gates-clk" - for the APB2 gates on A31 "allwinner,sun8i-a23-apb2-gates-clk" - for the APB2 gates on A23 "allwinner,sun5i-a13-mbus-clk" - for the MBUS clock on A13 + "allwinner,sun4i-a10-mmc-output-clk" - for the MMC output clock on A10 + "allwinner,sun4i-a10-mmc-sample-clk" - for the MMC sample clock on A10 "allwinner,sun4i-a10-mod0-clk" - for the module 0 family of clocks "allwinner,sun7i-a20-out-clk" - for the external output clocks "allwinner,sun7i-a20-gmac-clk" - for the GMAC clock module on A20/A31 diff --git a/drivers/clk/sunxi/clk-mod0.c b/drivers/clk/sunxi/clk-mod0.c index 8a7f7036aea..4a563850ee6 100644 --- a/drivers/clk/sunxi/clk-mod0.c +++ b/drivers/clk/sunxi/clk-mod0.c @@ -16,6 +16,7 @@ #include #include +#include #include "clk-factors.h" @@ -92,3 +93,191 @@ static void __init sun5i_a13_mbus_setup(struct device_node *node) clk_prepare_enable(mbus); } CLK_OF_DECLARE(sun5i_a13_mbus, "allwinner,sun5i-a13-mbus-clk", sun5i_a13_mbus_setup); + +struct mmc_phase_data { + u8 offset; +}; + +struct mmc_phase { + struct clk_hw hw; + void __iomem *reg; + struct mmc_phase_data *data; + spinlock_t *lock; +}; + +#define to_mmc_phase(_hw) container_of(_hw, struct mmc_phase, hw) + +static int mmc_get_phase(struct clk_hw *hw) +{ + struct clk *mmc, *mmc_parent, *clk = hw->clk; + struct mmc_phase *phase = to_mmc_phase(hw); + unsigned int mmc_rate, mmc_parent_rate; + u16 step, mmc_div; + u32 value; + u8 delay; + + value = readl(phase->reg); + delay = (value >> phase->data->offset) & 0x3; + + if (!delay) + return 180; + + /* Get the main MMC clock */ + mmc = clk_get_parent(clk); + if (!mmc) + return -EINVAL; + + /* And its rate */ + mmc_rate = clk_get_rate(mmc); + if (!mmc_rate) + return -EINVAL; + + /* Now, get the MMC parent (most likely some PLL) */ + mmc_parent = clk_get_parent(mmc); + if (!mmc_parent) + return -EINVAL; + + /* And its rate */ + mmc_parent_rate = clk_get_rate(mmc_parent); + if (!mmc_parent_rate) + return -EINVAL; + + /* Get MMC clock divider */ + mmc_div = mmc_parent_rate / mmc_rate; + + step = DIV_ROUND_CLOSEST(360, mmc_div); + return delay * step; +} + +static int mmc_set_phase(struct clk_hw *hw, int degrees) +{ + struct clk *mmc, *mmc_parent, *clk = hw->clk; + struct mmc_phase *phase = to_mmc_phase(hw); + unsigned int mmc_rate, mmc_parent_rate; + unsigned long flags; + u32 value; + u8 delay; + + /* Get the main MMC clock */ + mmc = clk_get_parent(clk); + if (!mmc) + return -EINVAL; + + /* And its rate */ + mmc_rate = clk_get_rate(mmc); + if (!mmc_rate) + return -EINVAL; + + /* Now, get the MMC parent (most likely some PLL) */ + mmc_parent = clk_get_parent(mmc); + if (!mmc_parent) + return -EINVAL; + + /* And its rate */ + mmc_parent_rate = clk_get_rate(mmc_parent); + if (!mmc_parent_rate) + return -EINVAL; + + if (degrees != 180) { + u16 step, mmc_div; + + /* Get MMC clock divider */ + mmc_div = mmc_parent_rate / mmc_rate; + + /* + * We can only outphase the clocks by multiple of the + * PLL's period. + * + * Since the MMC clock in only a divider, and the + * formula to get the outphasing in degrees is deg = + * 360 * delta / period + * + * If we simplify this formula, we can see that the + * only thing that we're concerned about is the number + * of period we want to outphase our clock from, and + * the divider set by the MMC clock. + */ + step = DIV_ROUND_CLOSEST(360, mmc_div); + delay = DIV_ROUND_CLOSEST(degrees, step); + } else { + delay = 0; + } + + spin_lock_irqsave(phase->lock, flags); + value = readl(phase->reg); + value &= ~GENMASK(phase->data->offset + 3, phase->data->offset); + value |= delay << phase->data->offset; + writel(value, phase->reg); + spin_unlock_irqrestore(phase->lock, flags); + + return 0; +} + +static const struct clk_ops mmc_clk_ops = { + .get_phase = mmc_get_phase, + .set_phase = mmc_set_phase, +}; + +static void __init sun4i_a10_mmc_phase_setup(struct device_node *node, + struct mmc_phase_data *data) +{ + const char *parent_names[1] = { of_clk_get_parent_name(node, 0) }; + struct clk_init_data init = { + .num_parents = 1, + .parent_names = parent_names, + .ops = &mmc_clk_ops, + }; + + struct mmc_phase *phase; + struct clk *clk; + + phase = kmalloc(sizeof(*phase), GFP_KERNEL); + if (!phase) + return; + + phase->hw.init = &init; + + phase->reg = of_iomap(node, 0); + if (!phase->reg) + goto err_free; + + phase->data = data; + phase->lock = &sun4i_a10_mod0_lock; + + if (of_property_read_string(node, "clock-output-names", &init.name)) + init.name = node->name; + + clk = clk_register(NULL, &phase->hw); + if (IS_ERR(clk)) + goto err_unmap; + + of_clk_add_provider(node, of_clk_src_simple_get, clk); + + return; + +err_unmap: + iounmap(phase->reg); +err_free: + kfree(phase); +} + + +static struct mmc_phase_data mmc_output_clk = { + .offset = 8, +}; + +static struct mmc_phase_data mmc_sample_clk = { + .offset = 20, +}; + +static void __init sun4i_a10_mmc_output_setup(struct device_node *node) +{ + sun4i_a10_mmc_phase_setup(node, &mmc_output_clk); +} +CLK_OF_DECLARE(sun4i_a10_mmc_output, "allwinner,sun4i-a10-mmc-output-clk", sun4i_a10_mmc_output_setup); + +static void __init sun4i_a10_mmc_sample_setup(struct device_node *node) +{ + sun4i_a10_mmc_phase_setup(node, &mmc_sample_clk); +} +CLK_OF_DECLARE(sun4i_a10_mmc_sample, "allwinner,sun4i-a10-mmc-sample-clk", sun4i_a10_mmc_sample_setup); -- cgit v1.2.3-70-g09d2 From 9c8176bfb67f98ed9a521b624dcb6ab7fa254aa7 Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Tue, 16 Sep 2014 18:04:01 +0800 Subject: clk: sunxi: Add sun8i MBUS clock support The MBUS clock on sun8i is slightly different from the old mod0 clocks. The divider is 3 bits wider, while also needing a divider table for the higher 4 values, which all set the same divider. Signed-off-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard --- Documentation/devicetree/bindings/clock/sunxi.txt | 1 + drivers/clk/sunxi/Makefile | 1 + drivers/clk/sunxi/clk-sun8i-mbus.c | 78 +++++++++++++++++++++++ 3 files changed, 80 insertions(+) create mode 100644 drivers/clk/sunxi/clk-sun8i-mbus.c (limited to 'drivers/clk') diff --git a/Documentation/devicetree/bindings/clock/sunxi.txt b/Documentation/devicetree/bindings/clock/sunxi.txt index eb690ed92a5..ed116df9c3e 100644 --- a/Documentation/devicetree/bindings/clock/sunxi.txt +++ b/Documentation/devicetree/bindings/clock/sunxi.txt @@ -50,6 +50,7 @@ Required properties: "allwinner,sun4i-a10-mmc-output-clk" - for the MMC output clock on A10 "allwinner,sun4i-a10-mmc-sample-clk" - for the MMC sample clock on A10 "allwinner,sun4i-a10-mod0-clk" - for the module 0 family of clocks + "allwinner,sun8i-a23-mbus-clk" - for the MBUS clock on A23 "allwinner,sun7i-a20-out-clk" - for the external output clocks "allwinner,sun7i-a20-gmac-clk" - for the GMAC clock module on A20/A31 "allwinner,sun4i-a10-usb-clk" - for usb gates + resets on A10 / A20 diff --git a/drivers/clk/sunxi/Makefile b/drivers/clk/sunxi/Makefile index 833f086d4a5..7ddc2b55384 100644 --- a/drivers/clk/sunxi/Makefile +++ b/drivers/clk/sunxi/Makefile @@ -6,6 +6,7 @@ obj-y += clk-sunxi.o clk-factors.o obj-y += clk-a10-hosc.o obj-y += clk-a20-gmac.o obj-y += clk-mod0.o +obj-y += clk-sun8i-mbus.o obj-$(CONFIG_MFD_SUN6I_PRCM) += \ clk-sun6i-ar100.o clk-sun6i-apb0.o clk-sun6i-apb0-gates.o \ diff --git a/drivers/clk/sunxi/clk-sun8i-mbus.c b/drivers/clk/sunxi/clk-sun8i-mbus.c new file mode 100644 index 00000000000..8e49b44cee4 --- /dev/null +++ b/drivers/clk/sunxi/clk-sun8i-mbus.c @@ -0,0 +1,78 @@ +/* + * Copyright 2014 Chen-Yu Tsai + * + * Chen-Yu Tsai + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include +#include +#include + +#include "clk-factors.h" + +/** + * sun8i_a23_get_mbus_factors() - calculates m factor for MBUS clocks + * MBUS rate is calculated as follows + * rate = parent_rate / (m + 1); + */ + +static void sun8i_a23_get_mbus_factors(u32 *freq, u32 parent_rate, + u8 *n, u8 *k, u8 *m, u8 *p) +{ + u8 div; + + /* + * These clocks can only divide, so we will never be able to + * achieve frequencies higher than the parent frequency + */ + if (*freq > parent_rate) + *freq = parent_rate; + + div = DIV_ROUND_UP(parent_rate, *freq); + + if (div > 8) + div = 8; + + *freq = parent_rate / div; + + /* we were called to round the frequency, we can now return */ + if (m == NULL) + return; + + *m = div - 1; +} + +static struct clk_factors_config sun8i_a23_mbus_config = { + .mshift = 0, + .mwidth = 3, +}; + +static const struct factors_data sun8i_a23_mbus_data __initconst = { + .enable = 31, + .mux = 24, + .table = &sun8i_a23_mbus_config, + .getter = sun8i_a23_get_mbus_factors, +}; + +static DEFINE_SPINLOCK(sun8i_a23_mbus_lock); + +static void __init sun8i_a23_mbus_setup(struct device_node *node) +{ + struct clk *mbus = sunxi_factors_register(node, &sun8i_a23_mbus_data, + &sun8i_a23_mbus_lock); + + /* The MBUS clocks needs to be always enabled */ + __clk_get(mbus); + clk_prepare_enable(mbus); +} +CLK_OF_DECLARE(sun8i_a23_mbus, "allwinner,sun8i-a23-mbus-clk", sun8i_a23_mbus_setup); -- cgit v1.2.3-70-g09d2 From 9c030ea70b6a7eb2f7ee273b1ddd2282b053724f Mon Sep 17 00:00:00 2001 From: Doug Anderson Date: Mon, 15 Sep 2014 21:07:57 -0700 Subject: clk: rockchip: change pll rate without a clk-notifier The Rockchip PLL code switches into slow mode (AKA bypass more AKA 24MHz mode) before actually changing the PLL. This keeps anyone from using the PLL while it's changing. However, in all known Rockchip SoCs nobody should ever see the 24MHz when changing the PLL supplying the armclk because we should reparent children to an alternate (faster than 24MHz) PLL. One problem is that the code to switch to an alternate parent was running in PRE_RATE_CHANGE. ...and the code to switch to slow mode was _also_ running in PRE_RATE_CHANGE. That meant there was no real guarantee that we would switch to an alternate parent before switching to 24MHz mode. Let's move the switch to "slow mode" straight into rockchip_rk3066_pll_set_rate(). That means we're guaranteed that the 24MHz is really a last-resort. Note that without this change on real systems we were the code to switch to an alternate parent at 24MHz. In some older versions of that code we'd appy a (temporary) / 5 to the 24MHz causing us to run at 4.8MHz. That wasn't enough to service USB interrupts in some cases and could lead to a system hang. Signed-off-by: Doug Anderson Signed-off-by: Heiko Stuebner --- drivers/clk/rockchip/clk-pll.c | 63 +++++++++--------------------------------- 1 file changed, 13 insertions(+), 50 deletions(-) (limited to 'drivers/clk') diff --git a/drivers/clk/rockchip/clk-pll.c b/drivers/clk/rockchip/clk-pll.c index f2a1c7abf4d..a3e886a3848 100644 --- a/drivers/clk/rockchip/clk-pll.c +++ b/drivers/clk/rockchip/clk-pll.c @@ -34,7 +34,6 @@ struct rockchip_clk_pll { const struct clk_ops *pll_mux_ops; struct notifier_block clk_nb; - bool rate_change_remuxed; void __iomem *reg_base; int lock_offset; @@ -108,38 +107,6 @@ static int rockchip_pll_wait_lock(struct rockchip_clk_pll *pll) return -ETIMEDOUT; } -/** - * Set pll mux when changing the pll rate. - * This makes sure to move the pll mux away from the actual pll before - * changing its rate and back to the original parent after the change. - */ -static int rockchip_pll_notifier_cb(struct notifier_block *nb, - unsigned long event, void *data) -{ - struct rockchip_clk_pll *pll = to_rockchip_clk_pll_nb(nb); - struct clk_mux *pll_mux = &pll->pll_mux; - const struct clk_ops *pll_mux_ops = pll->pll_mux_ops; - int cur_parent; - - switch (event) { - case PRE_RATE_CHANGE: - cur_parent = pll_mux_ops->get_parent(&pll_mux->hw); - if (cur_parent == PLL_MODE_NORM) { - pll_mux_ops->set_parent(&pll_mux->hw, PLL_MODE_SLOW); - pll->rate_change_remuxed = 1; - } - break; - case POST_RATE_CHANGE: - if (pll->rate_change_remuxed) { - pll_mux_ops->set_parent(&pll_mux->hw, PLL_MODE_NORM); - pll->rate_change_remuxed = 0; - } - break; - } - - return NOTIFY_OK; -} - /** * PLL used in RK3066, RK3188 and RK3288 */ @@ -194,6 +161,10 @@ static int rockchip_rk3066_pll_set_rate(struct clk_hw *hw, unsigned long drate, const struct rockchip_pll_rate_table *rate; unsigned long old_rate = rockchip_rk3066_pll_recalc_rate(hw, prate); struct regmap *grf = rockchip_clk_get_grf(); + struct clk_mux *pll_mux = &pll->pll_mux; + const struct clk_ops *pll_mux_ops = pll->pll_mux_ops; + int rate_change_remuxed = 0; + int cur_parent; int ret; if (IS_ERR(grf)) { @@ -216,6 +187,12 @@ static int rockchip_rk3066_pll_set_rate(struct clk_hw *hw, unsigned long drate, pr_debug("%s: rate settings for %lu (nr, no, nf): (%d, %d, %d)\n", __func__, rate->rate, rate->nr, rate->no, rate->nf); + cur_parent = pll_mux_ops->get_parent(&pll_mux->hw); + if (cur_parent == PLL_MODE_NORM) { + pll_mux_ops->set_parent(&pll_mux->hw, PLL_MODE_SLOW); + rate_change_remuxed = 1; + } + /* enter reset mode */ writel(HIWORD_UPDATE(RK3066_PLLCON3_RESET, RK3066_PLLCON3_RESET, 0), pll->reg_base + RK3066_PLLCON(3)); @@ -247,6 +224,9 @@ static int rockchip_rk3066_pll_set_rate(struct clk_hw *hw, unsigned long drate, rockchip_rk3066_pll_set_rate(hw, old_rate, prate); } + if (rate_change_remuxed) + pll_mux_ops->set_parent(&pll_mux->hw, PLL_MODE_NORM); + return ret; } @@ -310,7 +290,6 @@ struct clk *rockchip_clk_register_pll(enum rockchip_pll_type pll_type, struct clk_mux *pll_mux; struct clk *pll_clk, *mux_clk; char pll_name[20]; - int ret; if (num_parents != 2) { pr_err("%s: needs two parent clocks\n", __func__); @@ -367,7 +346,6 @@ struct clk *rockchip_clk_register_pll(enum rockchip_pll_type pll_type, pll->lock_offset = grf_lock_offset; pll->lock_shift = lock_shift; pll->lock = lock; - pll->clk_nb.notifier_call = rockchip_pll_notifier_cb; pll_clk = clk_register(NULL, &pll->hw); if (IS_ERR(pll_clk)) { @@ -377,14 +355,6 @@ struct clk *rockchip_clk_register_pll(enum rockchip_pll_type pll_type, goto err_pll; } - ret = clk_notifier_register(pll_clk, &pll->clk_nb); - if (ret) { - pr_err("%s: failed to register clock notifier for %s : %d\n", - __func__, name, ret); - mux_clk = ERR_PTR(ret); - goto err_pll_notifier; - } - /* create the mux on top of the real pll */ pll->pll_mux_ops = &clk_mux_ops; pll_mux = &pll->pll_mux; @@ -417,13 +387,6 @@ struct clk *rockchip_clk_register_pll(enum rockchip_pll_type pll_type, return mux_clk; err_mux: - ret = clk_notifier_unregister(pll_clk, &pll->clk_nb); - if (ret) { - pr_err("%s: could not unregister clock notifier in error path : %d\n", - __func__, ret); - return mux_clk; - } -err_pll_notifier: clk_unregister(pll_clk); err_pll: kfree(pll); -- cgit v1.2.3-70-g09d2 From 11ff376fcfc0135b8947d27ab80162c218d1af90 Mon Sep 17 00:00:00 2001 From: Heiko Stuebner Date: Mon, 1 Sep 2014 23:52:40 +0200 Subject: clk: rockchip: fix rk3066 pll status register location The register providing the pll lock status is at a different address on the rk3066. The error became apparent while working on cpufreq support for the rockchip SoCs. Signed-off-by: Heiko Stuebner --- drivers/clk/rockchip/clk-rk3188.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) (limited to 'drivers/clk') diff --git a/drivers/clk/rockchip/clk-rk3188.c b/drivers/clk/rockchip/clk-rk3188.c index 0147614e94b..1c5e6442dcf 100644 --- a/drivers/clk/rockchip/clk-rk3188.c +++ b/drivers/clk/rockchip/clk-rk3188.c @@ -19,6 +19,7 @@ #include #include "clk.h" +#define RK3066_GRF_SOC_STATUS 0x15c #define RK3188_GRF_SOC_STATUS 0xac enum rk3188_plls { @@ -629,9 +630,6 @@ static void __init rk3188_common_clk_init(struct device_node *np) pr_warn("%s: could not register clock usb480m: %ld\n", __func__, PTR_ERR(clk)); - rockchip_clk_register_plls(rk3188_pll_clks, - ARRAY_SIZE(rk3188_pll_clks), - RK3188_GRF_SOC_STATUS); rockchip_clk_register_branches(common_clk_branches, ARRAY_SIZE(common_clk_branches)); rockchip_clk_protect_critical(rk3188_critical_clocks, @@ -644,6 +642,9 @@ static void __init rk3188_common_clk_init(struct device_node *np) static void __init rk3066a_clk_init(struct device_node *np) { rk3188_common_clk_init(np); + rockchip_clk_register_plls(rk3188_pll_clks, + ARRAY_SIZE(rk3188_pll_clks), + RK3066_GRF_SOC_STATUS); rockchip_clk_register_branches(rk3066a_clk_branches, ARRAY_SIZE(rk3066a_clk_branches)); } @@ -652,6 +653,9 @@ CLK_OF_DECLARE(rk3066a_cru, "rockchip,rk3066a-cru", rk3066a_clk_init); static void __init rk3188a_clk_init(struct device_node *np) { rk3188_common_clk_init(np); + rockchip_clk_register_plls(rk3188_pll_clks, + ARRAY_SIZE(rk3188_pll_clks), + RK3188_GRF_SOC_STATUS); rockchip_clk_register_branches(rk3188_clk_branches, ARRAY_SIZE(rk3188_clk_branches)); } -- cgit v1.2.3-70-g09d2 From ee17eb83c48e04653d8b430735f82fd4cdac6ca3 Mon Sep 17 00:00:00 2001 From: Jianqun Date: Mon, 1 Sep 2014 23:56:28 +0200 Subject: clk: rockchip: fix rk3288 pll status register location In RK3288, APLL lock status bit is in GRF_SOC_STATUS1, but in RK3188, is GRFSOC_STATUS0. Signed-off-by: Jianqun Also name the constant accordingly as GRF_SOC_STATUS1 to prevent confusion. Signed-off-by: Heiko Stuebner Reviewed-by: Doug Anderson Tested-by: Doug Anderson --- drivers/clk/rockchip/clk-rk3288.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/clk') diff --git a/drivers/clk/rockchip/clk-rk3288.c b/drivers/clk/rockchip/clk-rk3288.c index 21a5c74f1be..12112899ff5 100644 --- a/drivers/clk/rockchip/clk-rk3288.c +++ b/drivers/clk/rockchip/clk-rk3288.c @@ -20,7 +20,7 @@ #include "clk.h" #define RK3288_GRF_SOC_CON(x) (0x244 + x * 4) -#define RK3288_GRF_SOC_STATUS 0x280 +#define RK3288_GRF_SOC_STATUS1 0x284 enum rk3288_plls { apll, dpll, cpll, gpll, npll, @@ -733,7 +733,7 @@ static void __init rk3288_clk_init(struct device_node *np) rockchip_clk_register_plls(rk3288_pll_clks, ARRAY_SIZE(rk3288_pll_clks), - RK3288_GRF_SOC_STATUS); + RK3288_GRF_SOC_STATUS1); rockchip_clk_register_branches(rk3288_clk_branches, ARRAY_SIZE(rk3288_clk_branches)); rockchip_clk_protect_critical(rk3288_critical_clocks, -- cgit v1.2.3-70-g09d2 From f5f7004fdec7eb1d2372278f1acad5f70f2da1e4 Mon Sep 17 00:00:00 2001 From: Heiko Stuebner Date: Thu, 4 Sep 2014 21:24:45 +0200 Subject: clk: rockchip: reparent aclk_cpu_pre to the gpll aclk_cpu_pre on the rk3188 can either be sourced from the armclk or the gpll. To reduce complexity on apll changes caused by cpufreq, reparent it always to the gpll source. If really necessary it could be reparented back on a per board level using the assigned-clocks mechanism. Signed-off-by: Heiko Stuebner --- drivers/clk/rockchip/clk-rk3188.c | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+) (limited to 'drivers/clk') diff --git a/drivers/clk/rockchip/clk-rk3188.c b/drivers/clk/rockchip/clk-rk3188.c index 1c5e6442dcf..6a81bc9e54f 100644 --- a/drivers/clk/rockchip/clk-rk3188.c +++ b/drivers/clk/rockchip/clk-rk3188.c @@ -652,12 +652,33 @@ CLK_OF_DECLARE(rk3066a_cru, "rockchip,rk3066a-cru", rk3066a_clk_init); static void __init rk3188a_clk_init(struct device_node *np) { + struct clk *clk1, *clk2; + unsigned long rate; + int ret; + rk3188_common_clk_init(np); rockchip_clk_register_plls(rk3188_pll_clks, ARRAY_SIZE(rk3188_pll_clks), RK3188_GRF_SOC_STATUS); rockchip_clk_register_branches(rk3188_clk_branches, ARRAY_SIZE(rk3188_clk_branches)); + + /* reparent aclk_cpu_pre from apll */ + clk1 = __clk_lookup("aclk_cpu_pre"); + clk2 = __clk_lookup("gpll"); + if (clk1 && clk2) { + rate = clk_get_rate(clk1); + + ret = clk_set_parent(clk1, clk2); + if (ret < 0) + pr_warn("%s: could not reparent aclk_cpu_pre to gpll\n", + __func__); + + clk_set_rate(clk1, rate); + } else { + pr_warn("%s: missing clocks to reparent aclk_cpu_pre to gpll\n", + __func__); + } } CLK_OF_DECLARE(rk3188a_cru, "rockchip,rk3188a-cru", rk3188a_clk_init); -- cgit v1.2.3-70-g09d2 From 2b9bceeab70800546050f59cee4efb69c261a683 Mon Sep 17 00:00:00 2001 From: Heiko Stuebner Date: Thu, 4 Sep 2014 21:43:17 +0200 Subject: clk: rockchip: make tightly bound armclk child-clocks read-only Rockchip SoCs contain clocks tightly bound to the armclk, where the best rate / divider is supplied by the vendor after careful measuring. Often this ideal rate may be greater than the current rate. Therefore prevent the ccf from trying to set these dividers itself by setting them to read-only. In the case of the rk3066, this also includes the aclk_cpu, which makes it necessary to also split its direct child-clocks (pclk_cpu, hclk_cpu, ...) into individual definitions for rk3066 and rk3188. Signed-off-by: Heiko Stuebner Reviewed-by: Doug Anderson Tested-by: Doug Anderson --- drivers/clk/rockchip/clk-rk3188.c | 26 ++++++++++++++++++-------- drivers/clk/rockchip/clk-rk3288.c | 18 +++++++++--------- 2 files changed, 27 insertions(+), 17 deletions(-) (limited to 'drivers/clk') diff --git a/drivers/clk/rockchip/clk-rk3188.c b/drivers/clk/rockchip/clk-rk3188.c index 6a81bc9e54f..adfbfefeddf 100644 --- a/drivers/clk/rockchip/clk-rk3188.c +++ b/drivers/clk/rockchip/clk-rk3188.c @@ -174,17 +174,10 @@ static struct rockchip_clk_branch common_clk_branches[] __initdata = { GATE(0, "aclk_cpu", "aclk_cpu_pre", 0, RK2928_CLKGATE_CON(0), 3, GFLAGS), - DIV(0, "pclk_cpu_pre", "aclk_cpu_pre", 0, - RK2928_CLKSEL_CON(1), 12, 2, DFLAGS | CLK_DIVIDER_POWER_OF_TWO), GATE(0, "atclk_cpu", "pclk_cpu_pre", 0, RK2928_CLKGATE_CON(0), 6, GFLAGS), GATE(0, "pclk_cpu", "pclk_cpu_pre", 0, RK2928_CLKGATE_CON(0), 5, GFLAGS), - DIV(0, "hclk_cpu_pre", "aclk_cpu_pre", 0, - RK2928_CLKSEL_CON(1), 8, 2, DFLAGS | CLK_DIVIDER_POWER_OF_TWO), - COMPOSITE_NOMUX(0, "hclk_ahb2apb", "hclk_cpu_pre", 0, - RK2928_CLKSEL_CON(1), 14, 2, DFLAGS | CLK_DIVIDER_POWER_OF_TWO, - RK2928_CLKGATE_CON(4), 9, GFLAGS), GATE(0, "hclk_cpu", "hclk_cpu_pre", 0, RK2928_CLKGATE_CON(0), 4, GFLAGS), @@ -416,7 +409,17 @@ static struct rockchip_clk_branch rk3066a_clk_branches[] __initdata = { COMPOSITE_NOGATE(0, "armclk", mux_armclk_p, 0, RK2928_CLKSEL_CON(0), 8, 1, MFLAGS, 0, 5, DFLAGS), DIVTBL(0, "aclk_cpu_pre", "armclk", 0, - RK2928_CLKSEL_CON(1), 0, 3, DFLAGS, div_aclk_cpu_t), + RK2928_CLKSEL_CON(1), 0, 3, DFLAGS | CLK_DIVIDER_READ_ONLY, div_aclk_cpu_t), + DIV(0, "pclk_cpu_pre", "aclk_cpu_pre", 0, + RK2928_CLKSEL_CON(1), 12, 2, DFLAGS | CLK_DIVIDER_POWER_OF_TWO + | CLK_DIVIDER_READ_ONLY), + DIV(0, "hclk_cpu_pre", "aclk_cpu_pre", 0, + RK2928_CLKSEL_CON(1), 8, 2, DFLAGS | CLK_DIVIDER_POWER_OF_TWO + | CLK_DIVIDER_READ_ONLY), + COMPOSITE_NOMUX(0, "hclk_ahb2apb", "hclk_cpu_pre", 0, + RK2928_CLKSEL_CON(1), 14, 2, DFLAGS | CLK_DIVIDER_POWER_OF_TWO + | CLK_DIVIDER_READ_ONLY, + RK2928_CLKGATE_CON(4), 9, GFLAGS), GATE(CORE_L2C, "core_l2c", "aclk_cpu", 0, RK2928_CLKGATE_CON(9), 4, GFLAGS), @@ -534,6 +537,13 @@ static struct rockchip_clk_branch rk3188_clk_branches[] __initdata = { /* do not source aclk_cpu_pre from the apll, to keep complexity down */ COMPOSITE_NOGATE(0, "aclk_cpu_pre", mux_aclk_cpu_p, CLK_SET_RATE_NO_REPARENT, RK2928_CLKSEL_CON(0), 5, 1, MFLAGS, 0, 5, DFLAGS), + DIV(0, "pclk_cpu_pre", "aclk_cpu_pre", 0, + RK2928_CLKSEL_CON(1), 12, 2, DFLAGS | CLK_DIVIDER_POWER_OF_TWO), + DIV(0, "hclk_cpu_pre", "aclk_cpu_pre", 0, + RK2928_CLKSEL_CON(1), 8, 2, DFLAGS | CLK_DIVIDER_POWER_OF_TWO), + COMPOSITE_NOMUX(0, "hclk_ahb2apb", "hclk_cpu_pre", 0, + RK2928_CLKSEL_CON(1), 14, 2, DFLAGS | CLK_DIVIDER_POWER_OF_TWO, + RK2928_CLKGATE_CON(4), 9, GFLAGS), GATE(CORE_L2C, "core_l2c", "armclk", 0, RK2928_CLKGATE_CON(9), 4, GFLAGS), diff --git a/drivers/clk/rockchip/clk-rk3288.c b/drivers/clk/rockchip/clk-rk3288.c index 12112899ff5..f6f278b005b 100644 --- a/drivers/clk/rockchip/clk-rk3288.c +++ b/drivers/clk/rockchip/clk-rk3288.c @@ -170,31 +170,31 @@ static struct rockchip_clk_branch rk3288_clk_branches[] __initdata = { RK3288_CLKSEL_CON(0), 15, 1, MFLAGS, 8, 5, DFLAGS), COMPOSITE_NOMUX(0, "armcore0", "armclk", 0, - RK3288_CLKSEL_CON(36), 0, 3, DFLAGS, + RK3288_CLKSEL_CON(36), 0, 3, DFLAGS | CLK_DIVIDER_READ_ONLY, RK3288_CLKGATE_CON(12), 0, GFLAGS), COMPOSITE_NOMUX(0, "armcore1", "armclk", 0, - RK3288_CLKSEL_CON(36), 4, 3, DFLAGS, + RK3288_CLKSEL_CON(36), 4, 3, DFLAGS | CLK_DIVIDER_READ_ONLY, RK3288_CLKGATE_CON(12), 1, GFLAGS), COMPOSITE_NOMUX(0, "armcore2", "armclk", 0, - RK3288_CLKSEL_CON(36), 8, 3, DFLAGS, + RK3288_CLKSEL_CON(36), 8, 3, DFLAGS | CLK_DIVIDER_READ_ONLY, RK3288_CLKGATE_CON(12), 2, GFLAGS), COMPOSITE_NOMUX(0, "armcore3", "armclk", 0, - RK3288_CLKSEL_CON(36), 12, 3, DFLAGS, + RK3288_CLKSEL_CON(36), 12, 3, DFLAGS | CLK_DIVIDER_READ_ONLY, RK3288_CLKGATE_CON(12), 3, GFLAGS), COMPOSITE_NOMUX(0, "l2ram", "armclk", 0, - RK3288_CLKSEL_CON(37), 0, 3, DFLAGS, + RK3288_CLKSEL_CON(37), 0, 3, DFLAGS | CLK_DIVIDER_READ_ONLY, RK3288_CLKGATE_CON(12), 4, GFLAGS), COMPOSITE_NOMUX(0, "aclk_core_m0", "armclk", 0, - RK3288_CLKSEL_CON(0), 0, 4, DFLAGS, + RK3288_CLKSEL_CON(0), 0, 4, DFLAGS | CLK_DIVIDER_READ_ONLY, RK3288_CLKGATE_CON(12), 5, GFLAGS), COMPOSITE_NOMUX(0, "aclk_core_mp", "armclk", 0, - RK3288_CLKSEL_CON(0), 4, 4, DFLAGS, + RK3288_CLKSEL_CON(0), 4, 4, DFLAGS | CLK_DIVIDER_READ_ONLY, RK3288_CLKGATE_CON(12), 6, GFLAGS), COMPOSITE_NOMUX(0, "atclk", "armclk", 0, - RK3288_CLKSEL_CON(37), 4, 5, DFLAGS, + RK3288_CLKSEL_CON(37), 4, 5, DFLAGS | CLK_DIVIDER_READ_ONLY, RK3288_CLKGATE_CON(12), 7, GFLAGS), COMPOSITE_NOMUX(0, "pclk_dbg_pre", "armclk", 0, - RK3288_CLKSEL_CON(37), 9, 5, DFLAGS, + RK3288_CLKSEL_CON(37), 9, 5, DFLAGS | CLK_DIVIDER_READ_ONLY, RK3288_CLKGATE_CON(12), 8, GFLAGS), GATE(0, "pclk_dbg", "pclk_dbg_pre", 0, RK3288_CLKGATE_CON(12), 9, GFLAGS), -- cgit v1.2.3-70-g09d2 From f6fba5f6967dbc062a7c138d67e2314220f5dd04 Mon Sep 17 00:00:00 2001 From: Heiko Stuebner Date: Thu, 4 Sep 2014 22:10:43 +0200 Subject: clk: rockchip: add new clock-type for the cpuclk When changing the armclk on Rockchip SoCs it is supposed to be reparented to an alternate parent before changing the underlying pll and back after the change. Additionally there exist clocks that are very tightly bound to the armclk whose divider values are set according to the armclk rate. Add a special clock-type to handle all that. The rate table and divider values will be supplied from the soc-specific clock controllers. Signed-off-by: Heiko Stuebner Reviewed-by: Doug Anderson On a rk3288-board: Tested-by: Doug Anderson --- drivers/clk/rockchip/Makefile | 1 + drivers/clk/rockchip/clk-cpu.c | 329 +++++++++++++++++++++++++++++++++++++++++ drivers/clk/rockchip/clk.c | 21 +++ drivers/clk/rockchip/clk.h | 37 +++++ 4 files changed, 388 insertions(+) create mode 100644 drivers/clk/rockchip/clk-cpu.c (limited to 'drivers/clk') diff --git a/drivers/clk/rockchip/Makefile b/drivers/clk/rockchip/Makefile index ee6b077381e..bd8514d6363 100644 --- a/drivers/clk/rockchip/Makefile +++ b/drivers/clk/rockchip/Makefile @@ -5,6 +5,7 @@ obj-y += clk-rockchip.o obj-y += clk.o obj-y += clk-pll.o +obj-y += clk-cpu.o obj-$(CONFIG_RESET_CONTROLLER) += softrst.o obj-y += clk-rk3188.o diff --git a/drivers/clk/rockchip/clk-cpu.c b/drivers/clk/rockchip/clk-cpu.c new file mode 100644 index 00000000000..75c8c45ef72 --- /dev/null +++ b/drivers/clk/rockchip/clk-cpu.c @@ -0,0 +1,329 @@ +/* + * Copyright (c) 2014 MundoReader S.L. + * Author: Heiko Stuebner + * + * based on clk/samsung/clk-cpu.c + * Copyright (c) 2014 Samsung Electronics Co., Ltd. + * Author: Thomas Abraham + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * A CPU clock is defined as a clock supplied to a CPU or a group of CPUs. + * The CPU clock is typically derived from a hierarchy of clock + * blocks which includes mux and divider blocks. There are a number of other + * auxiliary clocks supplied to the CPU domain such as the debug blocks and AXI + * clock for CPU domain. The rates of these auxiliary clocks are related to the + * CPU clock rate and this relation is usually specified in the hardware manual + * of the SoC or supplied after the SoC characterization. + * + * The below implementation of the CPU clock allows the rate changes of the CPU + * clock and the corresponding rate changes of the auxillary clocks of the CPU + * domain. The platform clock driver provides a clock register configuration + * for each configurable rate which is then used to program the clock hardware + * registers to acheive a fast co-oridinated rate change for all the CPU domain + * clocks. + * + * On a rate change request for the CPU clock, the rate change is propagated + * upto the PLL supplying the clock to the CPU domain clock blocks. While the + * CPU domain PLL is reconfigured, the CPU domain clocks are driven using an + * alternate clock source. If required, the alternate clock source is divided + * down in order to keep the output clock rate within the previous OPP limits. + */ + +#include +#include +#include +#include +#include "clk.h" + +/** + * struct rockchip_cpuclk: information about clock supplied to a CPU core. + * @hw: handle between ccf and cpu clock. + * @alt_parent: alternate parent clock to use when switching the speed + * of the primary parent clock. + * @reg_base: base register for cpu-clock values. + * @clk_nb: clock notifier registered for changes in clock speed of the + * primary parent clock. + * @rate_count: number of rates in the rate_table + * @rate_table: pll-rates and their associated dividers + * @reg_data: cpu-specific register settings + * @lock: clock lock + */ +struct rockchip_cpuclk { + struct clk_hw hw; + + struct clk_mux cpu_mux; + const struct clk_ops *cpu_mux_ops; + + struct clk *alt_parent; + void __iomem *reg_base; + struct notifier_block clk_nb; + unsigned int rate_count; + struct rockchip_cpuclk_rate_table *rate_table; + const struct rockchip_cpuclk_reg_data *reg_data; + spinlock_t *lock; +}; + +#define to_rockchip_cpuclk_hw(hw) container_of(hw, struct rockchip_cpuclk, hw) +#define to_rockchip_cpuclk_nb(nb) \ + container_of(nb, struct rockchip_cpuclk, clk_nb) + +static const struct rockchip_cpuclk_rate_table *rockchip_get_cpuclk_settings( + struct rockchip_cpuclk *cpuclk, unsigned long rate) +{ + const struct rockchip_cpuclk_rate_table *rate_table = + cpuclk->rate_table; + int i; + + for (i = 0; i < cpuclk->rate_count; i++) { + if (rate == rate_table[i].prate) + return &rate_table[i]; + } + + return NULL; +} + +static unsigned long rockchip_cpuclk_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + struct rockchip_cpuclk *cpuclk = to_rockchip_cpuclk_hw(hw); + const struct rockchip_cpuclk_reg_data *reg_data = cpuclk->reg_data; + u32 clksel0 = readl_relaxed(cpuclk->reg_base + reg_data->core_reg); + + clksel0 >>= reg_data->div_core_shift; + clksel0 &= reg_data->div_core_mask; + return parent_rate / (clksel0 + 1); +} + +static const struct clk_ops rockchip_cpuclk_ops = { + .recalc_rate = rockchip_cpuclk_recalc_rate, +}; + +static void rockchip_cpuclk_set_dividers(struct rockchip_cpuclk *cpuclk, + const struct rockchip_cpuclk_rate_table *rate) +{ + int i; + + /* alternate parent is active now. set the dividers */ + for (i = 0; i < ARRAY_SIZE(rate->divs); i++) { + const struct rockchip_cpuclk_clksel *clksel = &rate->divs[i]; + + if (!clksel->reg) + continue; + + pr_debug("%s: setting reg 0x%x to 0x%x\n", + __func__, clksel->reg, clksel->val); + writel(clksel->val , cpuclk->reg_base + clksel->reg); + } +} + +static int rockchip_cpuclk_pre_rate_change(struct rockchip_cpuclk *cpuclk, + struct clk_notifier_data *ndata) +{ + const struct rockchip_cpuclk_reg_data *reg_data = cpuclk->reg_data; + unsigned long alt_prate, alt_div; + + alt_prate = clk_get_rate(cpuclk->alt_parent); + + spin_lock(cpuclk->lock); + + /* + * If the old parent clock speed is less than the clock speed + * of the alternate parent, then it should be ensured that at no point + * the armclk speed is more than the old_rate until the dividers are + * set. + */ + if (alt_prate > ndata->old_rate) { + /* calculate dividers */ + alt_div = DIV_ROUND_UP(alt_prate, ndata->old_rate) - 1; + if (alt_div > reg_data->div_core_mask) { + pr_warn("%s: limiting alt-divider %lu to %d\n", + __func__, alt_div, reg_data->div_core_mask); + alt_div = reg_data->div_core_mask; + } + + /* + * Change parents and add dividers in a single transaction. + * + * NOTE: we do this in a single transaction so we're never + * dividing the primary parent by the extra dividers that were + * needed for the alt. + */ + pr_debug("%s: setting div %lu as alt-rate %lu > old-rate %lu\n", + __func__, alt_div, alt_prate, ndata->old_rate); + + writel(HIWORD_UPDATE(alt_div, reg_data->div_core_mask, + reg_data->div_core_shift) | + HIWORD_UPDATE(1, 1, reg_data->mux_core_shift), + cpuclk->reg_base + reg_data->core_reg); + } else { + /* select alternate parent */ + writel(HIWORD_UPDATE(1, 1, reg_data->mux_core_shift), + cpuclk->reg_base + reg_data->core_reg); + } + + spin_unlock(cpuclk->lock); + return 0; +} + +static int rockchip_cpuclk_post_rate_change(struct rockchip_cpuclk *cpuclk, + struct clk_notifier_data *ndata) +{ + const struct rockchip_cpuclk_reg_data *reg_data = cpuclk->reg_data; + const struct rockchip_cpuclk_rate_table *rate; + + rate = rockchip_get_cpuclk_settings(cpuclk, ndata->new_rate); + if (!rate) { + pr_err("%s: Invalid rate : %lu for cpuclk\n", + __func__, ndata->new_rate); + return -EINVAL; + } + + spin_lock(cpuclk->lock); + + if (ndata->old_rate < ndata->new_rate) + rockchip_cpuclk_set_dividers(cpuclk, rate); + + /* + * post-rate change event, re-mux to primary parent and remove dividers. + * + * NOTE: we do this in a single transaction so we're never dividing the + * primary parent by the extra dividers that were needed for the alt. + */ + + writel(HIWORD_UPDATE(0, reg_data->div_core_mask, + reg_data->div_core_shift) | + HIWORD_UPDATE(0, 1, reg_data->mux_core_shift), + cpuclk->reg_base + reg_data->core_reg); + + if (ndata->old_rate > ndata->new_rate) + rockchip_cpuclk_set_dividers(cpuclk, rate); + + spin_unlock(cpuclk->lock); + return 0; +} + +/* + * This clock notifier is called when the frequency of the parent clock + * of cpuclk is to be changed. This notifier handles the setting up all + * the divider clocks, remux to temporary parent and handling the safe + * frequency levels when using temporary parent. + */ +static int rockchip_cpuclk_notifier_cb(struct notifier_block *nb, + unsigned long event, void *data) +{ + struct clk_notifier_data *ndata = data; + struct rockchip_cpuclk *cpuclk = to_rockchip_cpuclk_nb(nb); + int ret = 0; + + pr_debug("%s: event %lu, old_rate %lu, new_rate: %lu\n", + __func__, event, ndata->old_rate, ndata->new_rate); + if (event == PRE_RATE_CHANGE) + ret = rockchip_cpuclk_pre_rate_change(cpuclk, ndata); + else if (event == POST_RATE_CHANGE) + ret = rockchip_cpuclk_post_rate_change(cpuclk, ndata); + + return notifier_from_errno(ret); +} + +struct clk *rockchip_clk_register_cpuclk(const char *name, + const char **parent_names, u8 num_parents, + const struct rockchip_cpuclk_reg_data *reg_data, + const struct rockchip_cpuclk_rate_table *rates, + int nrates, void __iomem *reg_base, spinlock_t *lock) +{ + struct rockchip_cpuclk *cpuclk; + struct clk_init_data init; + struct clk *clk, *cclk; + int ret; + + if (num_parents != 2) { + pr_err("%s: needs two parent clocks\n", __func__); + return ERR_PTR(-EINVAL); + } + + cpuclk = kzalloc(sizeof(*cpuclk), GFP_KERNEL); + if (!cpuclk) + return ERR_PTR(-ENOMEM); + + init.name = name; + init.parent_names = &parent_names[0]; + init.num_parents = 1; + init.ops = &rockchip_cpuclk_ops; + + /* only allow rate changes when we have a rate table */ + init.flags = (nrates > 0) ? CLK_SET_RATE_PARENT : 0; + + /* disallow automatic parent changes by ccf */ + init.flags |= CLK_SET_RATE_NO_REPARENT; + + init.flags |= CLK_GET_RATE_NOCACHE; + + cpuclk->reg_base = reg_base; + cpuclk->lock = lock; + cpuclk->reg_data = reg_data; + cpuclk->clk_nb.notifier_call = rockchip_cpuclk_notifier_cb; + cpuclk->hw.init = &init; + + cpuclk->alt_parent = __clk_lookup(parent_names[1]); + if (!cpuclk->alt_parent) { + pr_err("%s: could not lookup alternate parent\n", + __func__); + ret = -EINVAL; + goto free_cpuclk; + } + + ret = clk_prepare_enable(cpuclk->alt_parent); + if (ret) { + pr_err("%s: could not enable alternate parent\n", + __func__); + goto free_cpuclk; + } + + clk = __clk_lookup(parent_names[0]); + if (!clk) { + pr_err("%s: could not lookup parent clock %s\n", + __func__, parent_names[0]); + ret = -EINVAL; + goto free_cpuclk; + } + + ret = clk_notifier_register(clk, &cpuclk->clk_nb); + if (ret) { + pr_err("%s: failed to register clock notifier for %s\n", + __func__, name); + goto free_cpuclk; + } + + if (nrates > 0) { + cpuclk->rate_count = nrates; + cpuclk->rate_table = kmemdup(rates, + sizeof(*rates) * nrates, + GFP_KERNEL); + if (!cpuclk->rate_table) { + pr_err("%s: could not allocate memory for cpuclk rates\n", + __func__); + ret = -ENOMEM; + goto unregister_notifier; + } + } + + cclk = clk_register(NULL, &cpuclk->hw); + if (IS_ERR(clk)) { + pr_err("%s: could not register cpuclk %s\n", __func__, name); + ret = PTR_ERR(clk); + goto free_rate_table; + } + + return cclk; + +free_rate_table: + kfree(cpuclk->rate_table); +unregister_notifier: + clk_notifier_unregister(clk, &cpuclk->clk_nb); +free_cpuclk: + kfree(cpuclk); + return ERR_PTR(ret); +} diff --git a/drivers/clk/rockchip/clk.c b/drivers/clk/rockchip/clk.c index d9c6db2151b..fd3b5ef87e2 100644 --- a/drivers/clk/rockchip/clk.c +++ b/drivers/clk/rockchip/clk.c @@ -297,6 +297,27 @@ void __init rockchip_clk_register_branches( } } +void __init rockchip_clk_register_armclk(unsigned int lookup_id, + const char *name, const char **parent_names, + u8 num_parents, + const struct rockchip_cpuclk_reg_data *reg_data, + const struct rockchip_cpuclk_rate_table *rates, + int nrates) +{ + struct clk *clk; + + clk = rockchip_clk_register_cpuclk(name, parent_names, num_parents, + reg_data, rates, nrates, reg_base, + &clk_lock); + if (IS_ERR(clk)) { + pr_err("%s: failed to register clock %s: %ld\n", + __func__, name, PTR_ERR(clk)); + return; + } + + rockchip_clk_add_lookup(clk, lookup_id); +} + void __init rockchip_clk_protect_critical(const char *clocks[], int nclocks) { int i; diff --git a/drivers/clk/rockchip/clk.h b/drivers/clk/rockchip/clk.h index 2b0bca19db4..f4791fbb3da 100644 --- a/drivers/clk/rockchip/clk.h +++ b/drivers/clk/rockchip/clk.h @@ -120,6 +120,38 @@ struct clk *rockchip_clk_register_pll(enum rockchip_pll_type pll_type, struct rockchip_pll_rate_table *rate_table, spinlock_t *lock); +struct rockchip_cpuclk_clksel { + int reg; + u32 val; +}; + +#define ROCKCHIP_CPUCLK_NUM_DIVIDERS 2 +struct rockchip_cpuclk_rate_table { + unsigned long prate; + struct rockchip_cpuclk_clksel divs[ROCKCHIP_CPUCLK_NUM_DIVIDERS]; +}; + +/** + * struct rockchip_cpuclk_reg_data: describes register offsets and masks of the cpuclock + * @core_reg: register offset of the core settings register + * @div_core_shift: core divider offset used to divide the pll value + * @div_core_mask: core divider mask + * @mux_core_shift: offset of the core multiplexer + */ +struct rockchip_cpuclk_reg_data { + int core_reg; + u8 div_core_shift; + u32 div_core_mask; + int mux_core_reg; + u8 mux_core_shift; +}; + +struct clk *rockchip_clk_register_cpuclk(const char *name, + const char **parent_names, u8 num_parents, + const struct rockchip_cpuclk_reg_data *reg_data, + const struct rockchip_cpuclk_rate_table *rates, + int nrates, void __iomem *reg_base, spinlock_t *lock); + #define PNAME(x) static const char *x[] __initconst enum rockchip_clk_branch_type { @@ -329,6 +361,11 @@ void rockchip_clk_register_branches(struct rockchip_clk_branch *clk_list, unsigned int nr_clk); void rockchip_clk_register_plls(struct rockchip_pll_clock *pll_list, unsigned int nr_pll, int grf_lock_offset); +void rockchip_clk_register_armclk(unsigned int lookup_id, const char *name, + const char **parent_names, u8 num_parents, + const struct rockchip_cpuclk_reg_data *reg_data, + const struct rockchip_cpuclk_rate_table *rates, + int nrates); void rockchip_clk_protect_critical(const char *clocks[], int nclocks); #define ROCKCHIP_SOFTRST_HIWORD_MASK BIT(0) -- cgit v1.2.3-70-g09d2 From 0e5bdb3f9fa5c2bd4452c258de78122ef15f62d6 Mon Sep 17 00:00:00 2001 From: Heiko Stuebner Date: Fri, 5 Sep 2014 11:25:03 +0200 Subject: clk: rockchip: switch to using the new cpuclk type for armclk This adds the necessary soc-specific divider values and switches the armclk to use the newly introduced cpuclk type. Signed-off-by: Heiko Stuebner Reviewed-by: Doug Anderson Tested-by: Doug Anderson --- drivers/clk/rockchip/clk-rk3188.c | 104 ++++++++++++++++++++++++++++++++++++-- drivers/clk/rockchip/clk-rk3288.c | 71 +++++++++++++++++++++++++- 2 files changed, 169 insertions(+), 6 deletions(-) (limited to 'drivers/clk') diff --git a/drivers/clk/rockchip/clk-rk3188.c b/drivers/clk/rockchip/clk-rk3188.c index adfbfefeddf..ceabce59549 100644 --- a/drivers/clk/rockchip/clk-rk3188.c +++ b/drivers/clk/rockchip/clk-rk3188.c @@ -101,6 +101,98 @@ struct rockchip_pll_rate_table rk3188_pll_rates[] = { { /* sentinel */ }, }; +#define RK3066_DIV_CORE_PERIPH_MASK 0x3 +#define RK3066_DIV_CORE_PERIPH_SHIFT 6 +#define RK3066_DIV_ACLK_CORE_MASK 0x7 +#define RK3066_DIV_ACLK_CORE_SHIFT 0 +#define RK3066_DIV_ACLK_HCLK_MASK 0x3 +#define RK3066_DIV_ACLK_HCLK_SHIFT 8 +#define RK3066_DIV_ACLK_PCLK_MASK 0x3 +#define RK3066_DIV_ACLK_PCLK_SHIFT 12 +#define RK3066_DIV_AHB2APB_MASK 0x3 +#define RK3066_DIV_AHB2APB_SHIFT 14 + +#define RK3066_CLKSEL0(_core_peri) \ + { \ + .reg = RK2928_CLKSEL_CON(0), \ + .val = HIWORD_UPDATE(_core_peri, RK3066_DIV_CORE_PERIPH_MASK, \ + RK3066_DIV_CORE_PERIPH_SHIFT) \ + } +#define RK3066_CLKSEL1(_aclk_core, _aclk_hclk, _aclk_pclk, _ahb2apb) \ + { \ + .reg = RK2928_CLKSEL_CON(1), \ + .val = HIWORD_UPDATE(_aclk_core, RK3066_DIV_ACLK_CORE_MASK, \ + RK3066_DIV_ACLK_CORE_SHIFT) | \ + HIWORD_UPDATE(_aclk_hclk, RK3066_DIV_ACLK_HCLK_MASK, \ + RK3066_DIV_ACLK_HCLK_SHIFT) | \ + HIWORD_UPDATE(_aclk_pclk, RK3066_DIV_ACLK_PCLK_MASK, \ + RK3066_DIV_ACLK_PCLK_SHIFT) | \ + HIWORD_UPDATE(_ahb2apb, RK3066_DIV_AHB2APB_MASK, \ + RK3066_DIV_AHB2APB_SHIFT), \ + } + +#define RK3066_CPUCLK_RATE(_prate, _core_peri, _acore, _ahclk, _apclk, _h2p) \ + { \ + .prate = _prate, \ + .divs = { \ + RK3066_CLKSEL0(_core_peri), \ + RK3066_CLKSEL1(_acore, _ahclk, _apclk, _h2p), \ + }, \ + } + +static struct rockchip_cpuclk_rate_table rk3066_cpuclk_rates[] __initdata = { + RK3066_CPUCLK_RATE(1416000000, 2, 3, 1, 2, 1), + RK3066_CPUCLK_RATE(1200000000, 2, 3, 1, 2, 1), + RK3066_CPUCLK_RATE(1008000000, 2, 2, 1, 2, 1), + RK3066_CPUCLK_RATE( 816000000, 2, 2, 1, 2, 1), + RK3066_CPUCLK_RATE( 600000000, 1, 2, 1, 2, 1), + RK3066_CPUCLK_RATE( 504000000, 1, 1, 1, 2, 1), + RK3066_CPUCLK_RATE( 312000000, 0, 1, 1, 1, 0), +}; + +static const struct rockchip_cpuclk_reg_data rk3066_cpuclk_data = { + .core_reg = RK2928_CLKSEL_CON(0), + .div_core_shift = 0, + .div_core_mask = 0x1f, + .mux_core_shift = 8, +}; + +#define RK3188_DIV_ACLK_CORE_MASK 0x7 +#define RK3188_DIV_ACLK_CORE_SHIFT 3 + +#define RK3188_CLKSEL1(_aclk_core) \ + { \ + .reg = RK2928_CLKSEL_CON(1), \ + .val = HIWORD_UPDATE(_aclk_core, RK3188_DIV_ACLK_CORE_MASK,\ + RK3188_DIV_ACLK_CORE_SHIFT) \ + } +#define RK3188_CPUCLK_RATE(_prate, _core_peri, _aclk_core) \ + { \ + .prate = _prate, \ + .divs = { \ + RK3066_CLKSEL0(_core_peri), \ + RK3188_CLKSEL1(_aclk_core), \ + }, \ + } + +static struct rockchip_cpuclk_rate_table rk3188_cpuclk_rates[] __initdata = { + RK3188_CPUCLK_RATE(1608000000, 2, 3), + RK3188_CPUCLK_RATE(1416000000, 2, 3), + RK3188_CPUCLK_RATE(1200000000, 2, 3), + RK3188_CPUCLK_RATE(1008000000, 2, 3), + RK3188_CPUCLK_RATE( 816000000, 2, 3), + RK3188_CPUCLK_RATE( 600000000, 1, 3), + RK3188_CPUCLK_RATE( 504000000, 1, 3), + RK3188_CPUCLK_RATE( 312000000, 0, 1), +}; + +static const struct rockchip_cpuclk_reg_data rk3188_cpuclk_data = { + .core_reg = RK2928_CLKSEL_CON(0), + .div_core_shift = 9, + .div_core_mask = 0x1f, + .mux_core_shift = 8, +}; + PNAME(mux_pll_p) = { "xin24m", "xin32k" }; PNAME(mux_armclk_p) = { "apll", "gpll_armclk" }; PNAME(mux_ddrphy_p) = { "dpll", "gpll_ddr" }; @@ -406,8 +498,6 @@ static struct clk_div_table div_aclk_cpu_t[] = { }; static struct rockchip_clk_branch rk3066a_clk_branches[] __initdata = { - COMPOSITE_NOGATE(0, "armclk", mux_armclk_p, 0, - RK2928_CLKSEL_CON(0), 8, 1, MFLAGS, 0, 5, DFLAGS), DIVTBL(0, "aclk_cpu_pre", "armclk", 0, RK2928_CLKSEL_CON(1), 0, 3, DFLAGS | CLK_DIVIDER_READ_ONLY, div_aclk_cpu_t), DIV(0, "pclk_cpu_pre", "aclk_cpu_pre", 0, @@ -528,8 +618,6 @@ PNAME(mux_hsicphy_p) = { "sclk_otgphy0", "sclk_otgphy1", "gpll", "cpll" }; static struct rockchip_clk_branch rk3188_clk_branches[] __initdata = { - COMPOSITE_NOGATE(0, "armclk", mux_armclk_p, 0, - RK2928_CLKSEL_CON(0), 8, 1, MFLAGS, 9, 5, DFLAGS), COMPOSITE_NOMUX_DIVTBL(0, "aclk_core", "armclk", 0, RK2928_CLKSEL_CON(1), 3, 3, DFLAGS | CLK_DIVIDER_READ_ONLY, div_rk3188_aclk_core_t, RK2928_CLKGATE_CON(0), 7, GFLAGS), @@ -657,6 +745,10 @@ static void __init rk3066a_clk_init(struct device_node *np) RK3066_GRF_SOC_STATUS); rockchip_clk_register_branches(rk3066a_clk_branches, ARRAY_SIZE(rk3066a_clk_branches)); + rockchip_clk_register_armclk(ARMCLK, "armclk", + mux_armclk_p, ARRAY_SIZE(mux_armclk_p), + &rk3066_cpuclk_data, rk3066_cpuclk_rates, + ARRAY_SIZE(rk3066_cpuclk_rates)); } CLK_OF_DECLARE(rk3066a_cru, "rockchip,rk3066a-cru", rk3066a_clk_init); @@ -672,6 +764,10 @@ static void __init rk3188a_clk_init(struct device_node *np) RK3188_GRF_SOC_STATUS); rockchip_clk_register_branches(rk3188_clk_branches, ARRAY_SIZE(rk3188_clk_branches)); + rockchip_clk_register_armclk(ARMCLK, "armclk", + mux_armclk_p, ARRAY_SIZE(mux_armclk_p), + &rk3188_cpuclk_data, rk3188_cpuclk_rates, + ARRAY_SIZE(rk3188_cpuclk_rates)); /* reparent aclk_cpu_pre from apll */ clk1 = __clk_lookup("aclk_cpu_pre"); diff --git a/drivers/clk/rockchip/clk-rk3288.c b/drivers/clk/rockchip/clk-rk3288.c index f6f278b005b..d053529113f 100644 --- a/drivers/clk/rockchip/clk-rk3288.c +++ b/drivers/clk/rockchip/clk-rk3288.c @@ -101,6 +101,70 @@ struct rockchip_pll_rate_table rk3288_pll_rates[] = { { /* sentinel */ }, }; +#define RK3288_DIV_ACLK_CORE_M0_MASK 0xf +#define RK3288_DIV_ACLK_CORE_M0_SHIFT 0 +#define RK3288_DIV_ACLK_CORE_MP_MASK 0xf +#define RK3288_DIV_ACLK_CORE_MP_SHIFT 4 +#define RK3288_DIV_L2RAM_MASK 0x7 +#define RK3288_DIV_L2RAM_SHIFT 0 +#define RK3288_DIV_ATCLK_MASK 0x1f +#define RK3288_DIV_ATCLK_SHIFT 4 +#define RK3288_DIV_PCLK_DBGPRE_MASK 0x1f +#define RK3288_DIV_PCLK_DBGPRE_SHIFT 9 + +#define RK3288_CLKSEL0(_core_m0, _core_mp) \ + { \ + .reg = RK3288_CLKSEL_CON(0), \ + .val = HIWORD_UPDATE(_core_m0, RK3288_DIV_ACLK_CORE_M0_MASK, \ + RK3288_DIV_ACLK_CORE_M0_SHIFT) | \ + HIWORD_UPDATE(_core_mp, RK3288_DIV_ACLK_CORE_MP_MASK, \ + RK3288_DIV_ACLK_CORE_MP_SHIFT), \ + } +#define RK3288_CLKSEL37(_l2ram, _atclk, _pclk_dbg_pre) \ + { \ + .reg = RK3288_CLKSEL_CON(37), \ + .val = HIWORD_UPDATE(_l2ram, RK3288_DIV_L2RAM_MASK, \ + RK3288_DIV_L2RAM_SHIFT) | \ + HIWORD_UPDATE(_atclk, RK3288_DIV_ATCLK_MASK, \ + RK3288_DIV_ATCLK_SHIFT) | \ + HIWORD_UPDATE(_pclk_dbg_pre, \ + RK3288_DIV_PCLK_DBGPRE_MASK, \ + RK3288_DIV_PCLK_DBGPRE_SHIFT), \ + } + +#define RK3288_CPUCLK_RATE(_prate, _core_m0, _core_mp, _l2ram, _atclk, _pdbg) \ + { \ + .prate = _prate, \ + .divs = { \ + RK3288_CLKSEL0(_core_m0, _core_mp), \ + RK3288_CLKSEL37(_l2ram, _atclk, _pdbg), \ + }, \ + } + +static struct rockchip_cpuclk_rate_table rk3288_cpuclk_rates[] __initdata = { + RK3288_CPUCLK_RATE(1800000000, 2, 4, 2, 4, 4), + RK3288_CPUCLK_RATE(1704000000, 2, 4, 2, 4, 4), + RK3288_CPUCLK_RATE(1608000000, 2, 4, 2, 4, 4), + RK3288_CPUCLK_RATE(1512000000, 2, 4, 2, 4, 4), + RK3288_CPUCLK_RATE(1416000000, 2, 4, 2, 4, 4), + RK3288_CPUCLK_RATE(1200000000, 2, 4, 2, 4, 4), + RK3288_CPUCLK_RATE(1008000000, 2, 4, 2, 4, 4), + RK3288_CPUCLK_RATE( 816000000, 2, 4, 2, 4, 4), + RK3288_CPUCLK_RATE( 696000000, 2, 4, 2, 4, 4), + RK3288_CPUCLK_RATE( 600000000, 2, 4, 2, 4, 4), + RK3288_CPUCLK_RATE( 408000000, 2, 4, 2, 4, 4), + RK3288_CPUCLK_RATE( 312000000, 2, 4, 2, 4, 4), + RK3288_CPUCLK_RATE( 216000000, 2, 4, 2, 4, 4), + RK3288_CPUCLK_RATE( 126000000, 2, 4, 2, 4, 4), +}; + +static const struct rockchip_cpuclk_reg_data rk3288_cpuclk_data = { + .core_reg = RK3288_CLKSEL_CON(0), + .div_core_shift = 8, + .div_core_mask = 0x1f, + .mux_core_shift = 15, +}; + PNAME(mux_pll_p) = { "xin24m", "xin32k" }; PNAME(mux_armclk_p) = { "apll_core", "gpll_core" }; PNAME(mux_ddrphy_p) = { "dpll_ddr", "gpll_ddr" }; @@ -166,8 +230,6 @@ static struct rockchip_clk_branch rk3288_clk_branches[] __initdata = { RK3288_CLKGATE_CON(0), 1, GFLAGS), GATE(0, "gpll_core", "gpll", 0, RK3288_CLKGATE_CON(0), 2, GFLAGS), - COMPOSITE_NOGATE(0, "armclk", mux_armclk_p, 0, - RK3288_CLKSEL_CON(0), 15, 1, MFLAGS, 8, 5, DFLAGS), COMPOSITE_NOMUX(0, "armcore0", "armclk", 0, RK3288_CLKSEL_CON(36), 0, 3, DFLAGS | CLK_DIVIDER_READ_ONLY, @@ -739,6 +801,11 @@ static void __init rk3288_clk_init(struct device_node *np) rockchip_clk_protect_critical(rk3288_critical_clocks, ARRAY_SIZE(rk3288_critical_clocks)); + rockchip_clk_register_armclk(ARMCLK, "armclk", + mux_armclk_p, ARRAY_SIZE(mux_armclk_p), + &rk3288_cpuclk_data, rk3288_cpuclk_rates, + ARRAY_SIZE(rk3288_cpuclk_rates)); + rockchip_register_softrst(np, 12, reg_base + RK3288_SOFTRST_CON(0), ROCKCHIP_SOFTRST_HIWORD_MASK); } -- cgit v1.2.3-70-g09d2 From 7af472485733c19a52bba5d1a064f6d88c0d9880 Mon Sep 17 00:00:00 2001 From: Xiubo Li Date: Mon, 22 Sep 2014 13:52:11 +0800 Subject: clk: use uninitialized_var instead setting 'flags' to 0 directly. Setting 'flags' to zero will be certainly a misleading way to avoid warning of 'flags' may be used uninitialized. uninitialized_var is a correct way because the warning is a false possitive. Signed-off-by: Xiubo Li Signed-off-by: Mike Turquette --- drivers/clk/clk-gate.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/clk') diff --git a/drivers/clk/clk-gate.c b/drivers/clk/clk-gate.c index 4a58c55255b..51fd87fb7ba 100644 --- a/drivers/clk/clk-gate.c +++ b/drivers/clk/clk-gate.c @@ -45,7 +45,7 @@ static void clk_gate_endisable(struct clk_hw *hw, int enable) { struct clk_gate *gate = to_clk_gate(hw); int set = gate->flags & CLK_GATE_SET_TO_DISABLE ? 1 : 0; - unsigned long flags = 0; + unsigned long uninitialized_var(flags); u32 reg; set ^= enable; -- cgit v1.2.3-70-g09d2 From 20e075585973453515be6615b91901c959e0a573 Mon Sep 17 00:00:00 2001 From: Zhangfei Gao Date: Tue, 13 May 2014 20:26:59 +0800 Subject: clk: hix5hd2: add complex clk Support clk of sata, usb and ethernet Signed-off-by: Jiancheng Xue Signed-off-by: Zhangfei Gao Signed-off-by: Wei Xu --- drivers/clk/hisilicon/clk-hix5hd2.c | 181 ++++++++++++++++++++++++++++++ include/dt-bindings/clock/hix5hd2-clock.h | 9 ++ 2 files changed, 190 insertions(+) (limited to 'drivers/clk') diff --git a/drivers/clk/hisilicon/clk-hix5hd2.c b/drivers/clk/hisilicon/clk-hix5hd2.c index e5fcfb4e32e..da9ca05e6fb 100644 --- a/drivers/clk/hisilicon/clk-hix5hd2.c +++ b/drivers/clk/hisilicon/clk-hix5hd2.c @@ -9,6 +9,8 @@ #include #include +#include +#include #include "clk.h" static struct hisi_fixed_rate_clock hix5hd2_fixed_rate_clks[] __initdata = { @@ -79,8 +81,184 @@ static struct hisi_gate_clock hix5hd2_gate_clks[] __initdata = { CLK_SET_RATE_PARENT, 0xa0, 1, 0, }, { HIX5HD2_MMC_CIU_RST, "rst_mmc_ciu", "clk_mmc_ciu", CLK_SET_RATE_PARENT, 0xa0, 4, CLK_GATE_SET_TO_DISABLE, }, + /* gsf */ + { HIX5HD2_FWD_BUS_CLK, "clk_fwd_bus", NULL, 0, 0xcc, 0, 0, }, + { HIX5HD2_FWD_SYS_CLK, "clk_fwd_sys", "clk_fwd_bus", 0, 0xcc, 5, 0, }, + { HIX5HD2_MAC0_PHY_CLK, "clk_fephy", "clk_fwd_sys", + CLK_SET_RATE_PARENT, 0x120, 0, 0, }, }; +enum hix5hd2_clk_type { + TYPE_COMPLEX, + TYPE_ETHER, +}; + +struct hix5hd2_complex_clock { + const char *name; + const char *parent_name; + u32 id; + u32 ctrl_reg; + u32 ctrl_clk_mask; + u32 ctrl_rst_mask; + u32 phy_reg; + u32 phy_clk_mask; + u32 phy_rst_mask; + enum hix5hd2_clk_type type; +}; + +struct hix5hd2_clk_complex { + struct clk_hw hw; + u32 id; + void __iomem *ctrl_reg; + u32 ctrl_clk_mask; + u32 ctrl_rst_mask; + void __iomem *phy_reg; + u32 phy_clk_mask; + u32 phy_rst_mask; +}; + +static struct hix5hd2_complex_clock hix5hd2_complex_clks[] __initdata = { + {"clk_mac0", "clk_fephy", HIX5HD2_MAC0_CLK, + 0xcc, 0xa, 0x500, 0x120, 0, 0x10, TYPE_ETHER}, + {"clk_mac1", "clk_fwd_sys", HIX5HD2_MAC1_CLK, + 0xcc, 0x14, 0xa00, 0x168, 0x2, 0, TYPE_ETHER}, + {"clk_sata", NULL, HIX5HD2_SATA_CLK, + 0xa8, 0x1f, 0x300, 0xac, 0x1, 0x0, TYPE_COMPLEX}, + {"clk_usb", NULL, HIX5HD2_USB_CLK, + 0xb8, 0xff, 0x3f000, 0xbc, 0x7, 0x3f00, TYPE_COMPLEX}, +}; + +#define to_complex_clk(_hw) container_of(_hw, struct hix5hd2_clk_complex, hw) + +static int clk_ether_prepare(struct clk_hw *hw) +{ + struct hix5hd2_clk_complex *clk = to_complex_clk(hw); + u32 val; + + val = readl_relaxed(clk->ctrl_reg); + val |= clk->ctrl_clk_mask | clk->ctrl_rst_mask; + writel_relaxed(val, clk->ctrl_reg); + val &= ~(clk->ctrl_rst_mask); + writel_relaxed(val, clk->ctrl_reg); + + val = readl_relaxed(clk->phy_reg); + val |= clk->phy_clk_mask; + val &= ~(clk->phy_rst_mask); + writel_relaxed(val, clk->phy_reg); + mdelay(10); + + val &= ~(clk->phy_clk_mask); + val |= clk->phy_rst_mask; + writel_relaxed(val, clk->phy_reg); + mdelay(10); + + val |= clk->phy_clk_mask; + val &= ~(clk->phy_rst_mask); + writel_relaxed(val, clk->phy_reg); + mdelay(30); + return 0; +} + +static void clk_ether_unprepare(struct clk_hw *hw) +{ + struct hix5hd2_clk_complex *clk = to_complex_clk(hw); + u32 val; + + val = readl_relaxed(clk->ctrl_reg); + val &= ~(clk->ctrl_clk_mask); + writel_relaxed(val, clk->ctrl_reg); +} + +static struct clk_ops clk_ether_ops = { + .prepare = clk_ether_prepare, + .unprepare = clk_ether_unprepare, +}; + +static int clk_complex_enable(struct clk_hw *hw) +{ + struct hix5hd2_clk_complex *clk = to_complex_clk(hw); + u32 val; + + val = readl_relaxed(clk->ctrl_reg); + val |= clk->ctrl_clk_mask; + val &= ~(clk->ctrl_rst_mask); + writel_relaxed(val, clk->ctrl_reg); + + val = readl_relaxed(clk->phy_reg); + val |= clk->phy_clk_mask; + val &= ~(clk->phy_rst_mask); + writel_relaxed(val, clk->phy_reg); + + return 0; +} + +static void clk_complex_disable(struct clk_hw *hw) +{ + struct hix5hd2_clk_complex *clk = to_complex_clk(hw); + u32 val; + + val = readl_relaxed(clk->ctrl_reg); + val |= clk->ctrl_rst_mask; + val &= ~(clk->ctrl_clk_mask); + writel_relaxed(val, clk->ctrl_reg); + + val = readl_relaxed(clk->phy_reg); + val |= clk->phy_rst_mask; + val &= ~(clk->phy_clk_mask); + writel_relaxed(val, clk->phy_reg); +} + +static struct clk_ops clk_complex_ops = { + .enable = clk_complex_enable, + .disable = clk_complex_disable, +}; + +void __init hix5hd2_clk_register_complex(struct hix5hd2_complex_clock *clks, + int nums, struct hisi_clock_data *data) +{ + void __iomem *base = data->base; + int i; + + for (i = 0; i < nums; i++) { + struct hix5hd2_clk_complex *p_clk; + struct clk *clk; + struct clk_init_data init; + + p_clk = kzalloc(sizeof(*p_clk), GFP_KERNEL); + if (!p_clk) + return; + + init.name = clks[i].name; + if (clks[i].type == TYPE_ETHER) + init.ops = &clk_ether_ops; + else + init.ops = &clk_complex_ops; + + init.flags = CLK_IS_BASIC; + init.parent_names = + (clks[i].parent_name ? &clks[i].parent_name : NULL); + init.num_parents = (clks[i].parent_name ? 1 : 0); + + p_clk->ctrl_reg = base + clks[i].ctrl_reg; + p_clk->ctrl_clk_mask = clks[i].ctrl_clk_mask; + p_clk->ctrl_rst_mask = clks[i].ctrl_rst_mask; + p_clk->phy_reg = base + clks[i].phy_reg; + p_clk->phy_clk_mask = clks[i].phy_clk_mask; + p_clk->phy_rst_mask = clks[i].phy_rst_mask; + p_clk->hw.init = &init; + + clk = clk_register(NULL, &p_clk->hw); + if (IS_ERR(clk)) { + kfree(p_clk); + pr_err("%s: failed to register clock %s\n", + __func__, clks[i].name); + continue; + } + + data->clk_data.clks[clks[i].id] = clk; + } +} + static void __init hix5hd2_clk_init(struct device_node *np) { struct hisi_clock_data *clk_data; @@ -96,6 +274,9 @@ static void __init hix5hd2_clk_init(struct device_node *np) clk_data); hisi_clk_register_gate(hix5hd2_gate_clks, ARRAY_SIZE(hix5hd2_gate_clks), clk_data); + hix5hd2_clk_register_complex(hix5hd2_complex_clks, + ARRAY_SIZE(hix5hd2_complex_clks), + clk_data); } CLK_OF_DECLARE(hix5hd2_clk, "hisilicon,hix5hd2-clock", hix5hd2_clk_init); diff --git a/include/dt-bindings/clock/hix5hd2-clock.h b/include/dt-bindings/clock/hix5hd2-clock.h index aad579a7580..e3286695382 100644 --- a/include/dt-bindings/clock/hix5hd2-clock.h +++ b/include/dt-bindings/clock/hix5hd2-clock.h @@ -53,6 +53,15 @@ #define HIX5HD2_MMC_CIU_CLK 130 #define HIX5HD2_MMC_BIU_CLK 131 #define HIX5HD2_MMC_CIU_RST 132 +#define HIX5HD2_FWD_BUS_CLK 133 +#define HIX5HD2_FWD_SYS_CLK 134 +#define HIX5HD2_MAC0_PHY_CLK 135 + +/* complex */ +#define HIX5HD2_MAC0_CLK 192 +#define HIX5HD2_MAC1_CLK 193 +#define HIX5HD2_SATA_CLK 194 +#define HIX5HD2_USB_CLK 195 #define HIX5HD2_NR_CLKS 256 #endif /* __DTS_HIX5HD2_CLOCK_H */ -- cgit v1.2.3-70-g09d2 From cc855dd9994cfd179891cf5b966ebc8051d95a9f Mon Sep 17 00:00:00 2001 From: Jiancheng Xue Date: Wed, 28 May 2014 11:35:32 +0800 Subject: clk: hix5hd2: add sd clk Signed-off-by: Jiancheng Xue Signed-off-by: Zhangfei Gao Signed-off-by: Wei Xu --- drivers/clk/hisilicon/clk-hix5hd2.c | 21 +++++++++++++++------ include/dt-bindings/clock/hix5hd2-clock.h | 4 ++++ 2 files changed, 19 insertions(+), 6 deletions(-) (limited to 'drivers/clk') diff --git a/drivers/clk/hisilicon/clk-hix5hd2.c b/drivers/clk/hisilicon/clk-hix5hd2.c index da9ca05e6fb..13d6ec24af1 100644 --- a/drivers/clk/hisilicon/clk-hix5hd2.c +++ b/drivers/clk/hisilicon/clk-hix5hd2.c @@ -50,9 +50,9 @@ static const char *sfc_mux_p[] __initconst = { "24m", "150m", "200m", "100m", "75m", }; static u32 sfc_mux_table[] = {0, 4, 5, 6, 7}; -static const char *sdio1_mux_p[] __initconst = { +static const char *sdio_mux_p[] __initconst = { "75m", "100m", "50m", "15m", }; -static u32 sdio1_mux_table[] = {0, 1, 2, 3}; +static u32 sdio_mux_table[] = {0, 1, 2, 3}; static const char *fephy_mux_p[] __initconst = { "25m", "125m"}; static u32 fephy_mux_table[] = {0, 1}; @@ -61,20 +61,29 @@ static u32 fephy_mux_table[] = {0, 1}; static struct hisi_mux_clock hix5hd2_mux_clks[] __initdata = { { HIX5HD2_SFC_MUX, "sfc_mux", sfc_mux_p, ARRAY_SIZE(sfc_mux_p), CLK_SET_RATE_PARENT, 0x5c, 8, 3, 0, sfc_mux_table, }, - { HIX5HD2_MMC_MUX, "mmc_mux", sdio1_mux_p, ARRAY_SIZE(sdio1_mux_p), - CLK_SET_RATE_PARENT, 0xa0, 8, 2, 0, sdio1_mux_table, }, + { HIX5HD2_MMC_MUX, "mmc_mux", sdio_mux_p, ARRAY_SIZE(sdio_mux_p), + CLK_SET_RATE_PARENT, 0xa0, 8, 2, 0, sdio_mux_table, }, + { HIX5HD2_SD_MUX, "sd_mux", sdio_mux_p, ARRAY_SIZE(sdio_mux_p), + CLK_SET_RATE_PARENT, 0x9c, 8, 2, 0, sdio_mux_table, }, { HIX5HD2_FEPHY_MUX, "fephy_mux", fephy_mux_p, ARRAY_SIZE(fephy_mux_p), CLK_SET_RATE_PARENT, 0x120, 8, 2, 0, fephy_mux_table, }, }; static struct hisi_gate_clock hix5hd2_gate_clks[] __initdata = { - /*sfc*/ + /* sfc */ { HIX5HD2_SFC_CLK, "clk_sfc", "sfc_mux", CLK_SET_RATE_PARENT, 0x5c, 0, 0, }, { HIX5HD2_SFC_RST, "rst_sfc", "clk_sfc", CLK_SET_RATE_PARENT, 0x5c, 4, CLK_GATE_SET_TO_DISABLE, }, - /*sdio1*/ + /* sdio0 */ + { HIX5HD2_SD_BIU_CLK, "clk_sd_biu", "200m", + CLK_SET_RATE_PARENT, 0x9c, 0, 0, }, + { HIX5HD2_SD_CIU_CLK, "clk_sd_ciu", "sd_mux", + CLK_SET_RATE_PARENT, 0x9c, 1, 0, }, + { HIX5HD2_SD_CIU_RST, "rst_sd_ciu", "clk_sd_ciu", + CLK_SET_RATE_PARENT, 0x9c, 4, CLK_GATE_SET_TO_DISABLE, }, + /* sdio1 */ { HIX5HD2_MMC_BIU_CLK, "clk_mmc_biu", "200m", CLK_SET_RATE_PARENT, 0xa0, 0, 0, }, { HIX5HD2_MMC_CIU_CLK, "clk_mmc_ciu", "mmc_mux", diff --git a/include/dt-bindings/clock/hix5hd2-clock.h b/include/dt-bindings/clock/hix5hd2-clock.h index e3286695382..5bd4135c954 100644 --- a/include/dt-bindings/clock/hix5hd2-clock.h +++ b/include/dt-bindings/clock/hix5hd2-clock.h @@ -46,6 +46,7 @@ #define HIX5HD2_SFC_MUX 64 #define HIX5HD2_MMC_MUX 65 #define HIX5HD2_FEPHY_MUX 66 +#define HIX5HD2_SD_MUX 67 /* gate clocks */ #define HIX5HD2_SFC_RST 128 @@ -56,6 +57,9 @@ #define HIX5HD2_FWD_BUS_CLK 133 #define HIX5HD2_FWD_SYS_CLK 134 #define HIX5HD2_MAC0_PHY_CLK 135 +#define HIX5HD2_SD_CIU_CLK 136 +#define HIX5HD2_SD_BIU_CLK 137 +#define HIX5HD2_SD_CIU_RST 138 /* complex */ #define HIX5HD2_MAC0_CLK 192 -- cgit v1.2.3-70-g09d2 From 1463fba39c2e95803147e1d6e159ea402d965e6f Mon Sep 17 00:00:00 2001 From: Guoxiong Yan Date: Tue, 17 Jun 2014 17:04:17 +0800 Subject: clk: hix5hd2: add watchdog0 clocks hix5hd2 add watchdog0 clocks Signed-off-by: Guoxiong Yan Signed-off-by: Zhangfei Gao Signed-off-by: Wei Xu --- drivers/clk/hisilicon/clk-hix5hd2.c | 5 +++++ include/dt-bindings/clock/hix5hd2-clock.h | 2 ++ 2 files changed, 7 insertions(+) (limited to 'drivers/clk') diff --git a/drivers/clk/hisilicon/clk-hix5hd2.c b/drivers/clk/hisilicon/clk-hix5hd2.c index 13d6ec24af1..6e97e54b869 100644 --- a/drivers/clk/hisilicon/clk-hix5hd2.c +++ b/drivers/clk/hisilicon/clk-hix5hd2.c @@ -95,6 +95,11 @@ static struct hisi_gate_clock hix5hd2_gate_clks[] __initdata = { { HIX5HD2_FWD_SYS_CLK, "clk_fwd_sys", "clk_fwd_bus", 0, 0xcc, 5, 0, }, { HIX5HD2_MAC0_PHY_CLK, "clk_fephy", "clk_fwd_sys", CLK_SET_RATE_PARENT, 0x120, 0, 0, }, + /* wdg0 */ + { HIX5HD2_WDG0_CLK, "clk_wdg0", "24m", + CLK_SET_RATE_PARENT, 0x178, 0, 0, }, + { HIX5HD2_WDG0_RST, "rst_wdg0", "clk_wdg0", + CLK_SET_RATE_PARENT, 0x178, 4, CLK_GATE_SET_TO_DISABLE, }, }; enum hix5hd2_clk_type { diff --git a/include/dt-bindings/clock/hix5hd2-clock.h b/include/dt-bindings/clock/hix5hd2-clock.h index 5bd4135c954..b8e3c9deda2 100644 --- a/include/dt-bindings/clock/hix5hd2-clock.h +++ b/include/dt-bindings/clock/hix5hd2-clock.h @@ -60,6 +60,8 @@ #define HIX5HD2_SD_CIU_CLK 136 #define HIX5HD2_SD_BIU_CLK 137 #define HIX5HD2_SD_CIU_RST 138 +#define HIX5HD2_WDG0_CLK 139 +#define HIX5HD2_WDG0_RST 140 /* complex */ #define HIX5HD2_MAC0_CLK 192 -- cgit v1.2.3-70-g09d2 From 45bcf9c6f299ae77c14c2ae8cea3f8e540fe80d1 Mon Sep 17 00:00:00 2001 From: Wei Yan Date: Thu, 7 Aug 2014 09:09:13 +0800 Subject: clk: hix5hd2: add I2C clocks hix5hd2 add I2C clocks (I2C0~i2C5) Signed-off-by: Wei Yan Signed-off-by: Zhangfei Gao Signed-off-by: Wei Xu --- drivers/clk/hisilicon/clk-hix5hd2.c | 25 +++++++++++++++++++++++++ include/dt-bindings/clock/hix5hd2-clock.h | 12 ++++++++++++ 2 files changed, 37 insertions(+) (limited to 'drivers/clk') diff --git a/drivers/clk/hisilicon/clk-hix5hd2.c b/drivers/clk/hisilicon/clk-hix5hd2.c index 6e97e54b869..3f369c60fe5 100644 --- a/drivers/clk/hisilicon/clk-hix5hd2.c +++ b/drivers/clk/hisilicon/clk-hix5hd2.c @@ -100,6 +100,31 @@ static struct hisi_gate_clock hix5hd2_gate_clks[] __initdata = { CLK_SET_RATE_PARENT, 0x178, 0, 0, }, { HIX5HD2_WDG0_RST, "rst_wdg0", "clk_wdg0", CLK_SET_RATE_PARENT, 0x178, 4, CLK_GATE_SET_TO_DISABLE, }, + /* I2C */ + {HIX5HD2_I2C0_CLK, "clk_i2c0", "100m", + CLK_SET_RATE_PARENT, 0x06c, 4, 0, }, + {HIX5HD2_I2C0_RST, "rst_i2c0", "clk_i2c0", + CLK_SET_RATE_PARENT, 0x06c, 5, CLK_GATE_SET_TO_DISABLE, }, + {HIX5HD2_I2C1_CLK, "clk_i2c1", "100m", + CLK_SET_RATE_PARENT, 0x06c, 8, 0, }, + {HIX5HD2_I2C1_RST, "rst_i2c1", "clk_i2c1", + CLK_SET_RATE_PARENT, 0x06c, 9, CLK_GATE_SET_TO_DISABLE, }, + {HIX5HD2_I2C2_CLK, "clk_i2c2", "100m", + CLK_SET_RATE_PARENT, 0x06c, 12, 0, }, + {HIX5HD2_I2C2_RST, "rst_i2c2", "clk_i2c2", + CLK_SET_RATE_PARENT, 0x06c, 13, CLK_GATE_SET_TO_DISABLE, }, + {HIX5HD2_I2C3_CLK, "clk_i2c3", "100m", + CLK_SET_RATE_PARENT, 0x06c, 16, 0, }, + {HIX5HD2_I2C3_RST, "rst_i2c3", "clk_i2c3", + CLK_SET_RATE_PARENT, 0x06c, 17, CLK_GATE_SET_TO_DISABLE, }, + {HIX5HD2_I2C4_CLK, "clk_i2c4", "100m", + CLK_SET_RATE_PARENT, 0x06c, 20, 0, }, + {HIX5HD2_I2C4_RST, "rst_i2c4", "clk_i2c4", + CLK_SET_RATE_PARENT, 0x06c, 21, CLK_GATE_SET_TO_DISABLE, }, + {HIX5HD2_I2C5_CLK, "clk_i2c5", "100m", + CLK_SET_RATE_PARENT, 0x06c, 0, 0, }, + {HIX5HD2_I2C5_RST, "rst_i2c5", "clk_i2c5", + CLK_SET_RATE_PARENT, 0x06c, 1, CLK_GATE_SET_TO_DISABLE, }, }; enum hix5hd2_clk_type { diff --git a/include/dt-bindings/clock/hix5hd2-clock.h b/include/dt-bindings/clock/hix5hd2-clock.h index b8e3c9deda2..fd29c174ba6 100644 --- a/include/dt-bindings/clock/hix5hd2-clock.h +++ b/include/dt-bindings/clock/hix5hd2-clock.h @@ -62,6 +62,18 @@ #define HIX5HD2_SD_CIU_RST 138 #define HIX5HD2_WDG0_CLK 139 #define HIX5HD2_WDG0_RST 140 +#define HIX5HD2_I2C0_CLK 141 +#define HIX5HD2_I2C0_RST 142 +#define HIX5HD2_I2C1_CLK 143 +#define HIX5HD2_I2C1_RST 144 +#define HIX5HD2_I2C2_CLK 145 +#define HIX5HD2_I2C2_RST 146 +#define HIX5HD2_I2C3_CLK 147 +#define HIX5HD2_I2C3_RST 148 +#define HIX5HD2_I2C4_CLK 149 +#define HIX5HD2_I2C4_RST 150 +#define HIX5HD2_I2C5_CLK 151 +#define HIX5HD2_I2C5_RST 152 /* complex */ #define HIX5HD2_MAC0_CLK 192 -- cgit v1.2.3-70-g09d2 From c08ee14cc6634457948bc5e26584697208baa02a Mon Sep 17 00:00:00 2001 From: Tero Kristo Date: Fri, 12 Sep 2014 15:01:57 +0300 Subject: clk: ti: change clock init to use generic of_clk_init Previously, the TI clock driver initialized all the clocks hierarchically under each separate clock provider node. Now, each clock that requires IO access will instead check their parent node to find out which IO range to use. This patch allows the TI clock driver to use a few new features provided by the generic of_clk_init, and also allows registration of clock nodes outside the clock hierarchy (for example, any external clocks.) Signed-off-by: Tero Kristo Cc: Mike Turquette Cc: Paul Walmsley Cc: Tony Lindgren Cc: Mark Rutland Cc: Peter Ujfalusi Cc: Jyri Sarha Cc: Stefan Assmann Acked-by: Tony Lindgren --- arch/arm/mach-omap2/io.c | 12 +++++-- arch/arm/mach-omap2/prm_common.c | 2 -- drivers/clk/ti/clk.c | 68 +++++++++++++++++++++++++--------------- include/linux/clk/ti.h | 1 + 4 files changed, 54 insertions(+), 29 deletions(-) (limited to 'drivers/clk') diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c index 5d0667c119f..a1b82a99484 100644 --- a/arch/arm/mach-omap2/io.c +++ b/arch/arm/mach-omap2/io.c @@ -734,8 +734,16 @@ int __init omap_clk_init(void) ti_clk_init_features(); ret = of_prcm_init(); - if (!ret) - ret = omap_clk_soc_init(); + if (ret) + return ret; + + of_clk_init(NULL); + + ti_dt_clk_init_retry_clks(); + + ti_dt_clockdomains_setup(); + + ret = omap_clk_soc_init(); return ret; } diff --git a/arch/arm/mach-omap2/prm_common.c b/arch/arm/mach-omap2/prm_common.c index 76ca320f007..3b890807f5e 100644 --- a/arch/arm/mach-omap2/prm_common.c +++ b/arch/arm/mach-omap2/prm_common.c @@ -525,8 +525,6 @@ int __init of_prcm_init(void) memmap_index++; } - ti_dt_clockdomains_setup(); - return 0; } diff --git a/drivers/clk/ti/clk.c b/drivers/clk/ti/clk.c index b1a6f7144f3..337abe5909e 100644 --- a/drivers/clk/ti/clk.c +++ b/drivers/clk/ti/clk.c @@ -25,8 +25,8 @@ #undef pr_fmt #define pr_fmt(fmt) "%s: " fmt, __func__ -static int ti_dt_clk_memmap_index; struct ti_clk_ll_ops *ti_clk_ll_ops; +static struct device_node *clocks_node_ptr[CLK_MAX_MEMMAPS]; /** * ti_dt_clocks_register - register DT alias clocks during boot @@ -108,9 +108,21 @@ void __iomem *ti_clk_get_reg_addr(struct device_node *node, int index) struct clk_omap_reg *reg; u32 val; u32 tmp; + int i; reg = (struct clk_omap_reg *)&tmp; - reg->index = ti_dt_clk_memmap_index; + + for (i = 0; i < CLK_MAX_MEMMAPS; i++) { + if (clocks_node_ptr[i] == node->parent) + break; + } + + if (i == CLK_MAX_MEMMAPS) { + pr_err("clk-provider not found for %s!\n", node->name); + return NULL; + } + + reg->index = i; if (of_property_read_u32_index(node, "reg", index, &val)) { pr_err("%s must have reg[%d]!\n", node->name, index); @@ -127,20 +139,14 @@ void __iomem *ti_clk_get_reg_addr(struct device_node *node, int index) * @parent: master node * @index: internal index for clk_reg_ops * - * Initializes a master clock IP block and its child clock nodes. - * Regmap is provided for accessing the register space for the - * IP block and all the clocks under it. + * Initializes a master clock IP block. This basically sets up the + * mapping from clocks node to the memory map index. All the clocks + * are then initialized through the common of_clk_init call, and the + * clocks will access their memory maps based on the node layout. */ void ti_dt_clk_init_provider(struct device_node *parent, int index) { - const struct of_device_id *match; - struct device_node *np; struct device_node *clocks; - of_clk_init_cb_t clk_init_cb; - struct clk_init_item *retry; - struct clk_init_item *tmp; - - ti_dt_clk_memmap_index = index; /* get clocks for this parent */ clocks = of_get_child_by_name(parent, "clocks"); @@ -149,19 +155,31 @@ void ti_dt_clk_init_provider(struct device_node *parent, int index) return; } - for_each_child_of_node(clocks, np) { - match = of_match_node(&__clk_of_table, np); - if (!match) - continue; - clk_init_cb = (of_clk_init_cb_t)match->data; - pr_debug("%s: initializing: %s\n", __func__, np->name); - clk_init_cb(np); - } + /* add clocks node info */ + clocks_node_ptr[index] = clocks; +} - list_for_each_entry_safe(retry, tmp, &retry_list, link) { - pr_debug("retry-init: %s\n", retry->node->name); - retry->func(retry->hw, retry->node); - list_del(&retry->link); - kfree(retry); +/** + * ti_dt_clk_init_retry_clks - init clocks from the retry list + * + * Initializes any clocks that have failed to initialize before, + * reasons being missing parent node(s) during earlier init. This + * typically happens only for DPLLs which need to have both of their + * parent clocks ready during init. + */ +void ti_dt_clk_init_retry_clks(void) +{ + struct clk_init_item *retry; + struct clk_init_item *tmp; + int retries = 5; + + while (!list_empty(&retry_list) && retries) { + list_for_each_entry_safe(retry, tmp, &retry_list, link) { + pr_debug("retry-init: %s\n", retry->node->name); + retry->func(retry->hw, retry->node); + list_del(&retry->link); + kfree(retry); + } + retries--; } } diff --git a/include/linux/clk/ti.h b/include/linux/clk/ti.h index e8d8a35034a..f75acbf70e9 100644 --- a/include/linux/clk/ti.h +++ b/include/linux/clk/ti.h @@ -292,6 +292,7 @@ void omap2xxx_clkt_vps_init(void); void __iomem *ti_clk_get_reg_addr(struct device_node *node, int index); void ti_dt_clocks_register(struct ti_dt_clk *oclks); void ti_dt_clk_init_provider(struct device_node *np, int index); +void ti_dt_clk_init_retry_clks(void); void ti_dt_clockdomains_setup(void); int ti_clk_retry_init(struct device_node *node, struct clk_hw *hw, ti_of_clk_init_cb_t func); -- cgit v1.2.3-70-g09d2 From 73b5d5f711f35617ff701bd88e887d3a1187e82b Mon Sep 17 00:00:00 2001 From: Tero Kristo Date: Fri, 12 Sep 2014 16:39:07 +0300 Subject: clk: ti: dra7-atl-clock: fix a memory leak of_clk_add_provider makes an internal copy of the parent_names property while its called, thus it is no longer needed after this call and can be freed. Signed-off-by: Tero Kristo Cc: Mike Turquette Cc: Peter Ujfalusi Acked-by: Peter Ujfalusi --- drivers/clk/ti/clk-dra7-atl.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/clk') diff --git a/drivers/clk/ti/clk-dra7-atl.c b/drivers/clk/ti/clk-dra7-atl.c index 4a65b410e4d..3f9308afdc2 100644 --- a/drivers/clk/ti/clk-dra7-atl.c +++ b/drivers/clk/ti/clk-dra7-atl.c @@ -199,6 +199,7 @@ static void __init of_dra7_atl_clock_setup(struct device_node *node) if (!IS_ERR(clk)) { of_clk_add_provider(node, of_clk_src_simple_get, clk); + kfree(parent_names); return; } cleanup: -- cgit v1.2.3-70-g09d2 From 319f1276f9a392526d2f40ecd76c1c829d0cf5fa Mon Sep 17 00:00:00 2001 From: Sebastian Andrzej Siewior Date: Thu, 18 Sep 2014 16:33:27 +0200 Subject: clk: ti: consider the fact that of_clk_get() might return an error I "forgot" to update the dtb and the kernel crashed: |Unable to handle kernel NULL pointer dereference at virtual address 0000002e |PC is at __clk_get_flags+0x4/0xc |LR is at ti_dt_clockdomains_setup+0x70/0xe8 because I did not have the clock nodes. of_clk_get() returns an error pointer which is not checked here. Acked-by: Nishanth Menon Signed-off-by: Sebastian Andrzej Siewior Signed-off-by: Tero Kristo --- drivers/clk/ti/clockdomain.c | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'drivers/clk') diff --git a/drivers/clk/ti/clockdomain.c b/drivers/clk/ti/clockdomain.c index f1e0038d76a..b4c5faccaec 100644 --- a/drivers/clk/ti/clockdomain.c +++ b/drivers/clk/ti/clockdomain.c @@ -36,6 +36,11 @@ static void __init of_ti_clockdomain_setup(struct device_node *node) for (i = 0; i < num_clks; i++) { clk = of_clk_get(node, i); + if (IS_ERR(clk)) { + pr_err("%s: Failed get %s' clock nr %d (%ld)\n", + __func__, node->full_name, i, PTR_ERR(clk)); + continue; + } if (__clk_get_flags(clk) & CLK_IS_BASIC) { pr_warn("can't setup clkdm for basic clk %s\n", __clk_get_name(clk)); -- cgit v1.2.3-70-g09d2 From e8627a9ec397dd55f650e54e4956e25cfa8aab7c Mon Sep 17 00:00:00 2001 From: Behan Webster Date: Fri, 26 Sep 2014 17:31:48 -0700 Subject: clk: ti: LLVMLinux: Move __init outside of type definition As written, the __init for ti_clk_get_div_table is in the middle of the return type. The gcc documentation indicates that section attributes should be added to the end of the function declaration: extern void foobar (void) __attribute__ ((section ("bar"))); However gcc seems to be very permissive with where attributes can be placed. clang on the other hand isn't so permissive, and fails if you put the section definition in the middle of the return type: drivers/clk/ti/divider.c:298:28: error: expected ';' after struct static struct clk_div_table ^ ; drivers/clk/ti/divider.c:298:1: warning: 'static' ignored on this declaration [-Wmissing-declarations] static struct clk_div_table ^ drivers/clk/ti/divider.c:299:9: error: type specifier missing, defaults to 'int' [-Werror,-Wimplicit-int] __init *ti_clk_get_div_table(struct device_node *node) ~~~~~~ ^ drivers/clk/ti/divider.c:345:9: warning: incompatible pointer types returning 'struct clk_div_table *' from a function with result type 'int *' [-Wincompatible-pointer-types] return table; ^~~~~ drivers/clk/ti/divider.c:419:9: warning: incompatible pointer types assigning to 'const struct clk_div_table *' from 'int *' [-Wincompatible-pointer-types] *table = ti_clk_get_div_table(node); ^ ~~~~~~~~~~~~~~~~~~~~~~~~~~ 3 warnings and 2 errors generated. By convention, most of the kernel code puts section attributes between the return type and function name. In the case where the return type is a pointer, it's important to place the '*' on left of the __init. This updated code works for both gcc and clang. Signed-off-by: Behan Webster Reviewed-by: Mark Charlebois Reviewed-by: Felipe Balbi Signed-off-by: Tero Kristo --- drivers/clk/ti/divider.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/clk') diff --git a/drivers/clk/ti/divider.c b/drivers/clk/ti/divider.c index e6aa10db7bb..636061e3636 100644 --- a/drivers/clk/ti/divider.c +++ b/drivers/clk/ti/divider.c @@ -295,8 +295,8 @@ static struct clk *_register_divider(struct device *dev, const char *name, return clk; } -static struct clk_div_table -__init *ti_clk_get_div_table(struct device_node *node) +static struct clk_div_table * +__init ti_clk_get_div_table(struct device_node *node) { struct clk_div_table *table; const __be32 *divspec; -- cgit v1.2.3-70-g09d2 From 04ed831f224d4553682f48e1b4a6b68f2622b68e Mon Sep 17 00:00:00 2001 From: Peter Ujfalusi Date: Mon, 29 Sep 2014 11:10:33 +0300 Subject: clk: ti: dra7-atl-clock: Mark the device as pm_runtime_irq_safe It is safe to call the pm sync calls in interrupt context in this driver. Signed-off-by: Peter Ujfalusi Signed-off-by: Tero Kristo --- drivers/clk/ti/clk-dra7-atl.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/clk') diff --git a/drivers/clk/ti/clk-dra7-atl.c b/drivers/clk/ti/clk-dra7-atl.c index 3f9308afdc2..c375cfb59ac 100644 --- a/drivers/clk/ti/clk-dra7-atl.c +++ b/drivers/clk/ti/clk-dra7-atl.c @@ -225,6 +225,7 @@ static int of_dra7_atl_clk_probe(struct platform_device *pdev) cinfo->iobase = of_iomap(node, 0); cinfo->dev = &pdev->dev; pm_runtime_enable(cinfo->dev); + pm_runtime_irq_safe(cinfo->dev); pm_runtime_get_sync(cinfo->dev); atl_write(cinfo, DRA7_ATL_PCLKMUX_REG(0), DRA7_ATL_PCLKMUX); -- cgit v1.2.3-70-g09d2 From 44b4aa97bea84fa8ac179155f147e3483cc7a6e0 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Tue, 30 Sep 2014 18:16:22 +0100 Subject: clk: gpio-gate: Ensure gpiod_ APIs are prototyped The gpio-gate clock uses the gpiod_ APIs but does not directly include the header for them causing build failures in some configurations including ARM allnoconfig. Include the header directly. Signed-off-by: Mark Brown Acked-by: Jyri Sarha Signed-off-by: Mike Turquette --- drivers/clk/clk-gpio-gate.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/clk') diff --git a/drivers/clk/clk-gpio-gate.c b/drivers/clk/clk-gpio-gate.c index 9dde8853368..08e43224fd5 100644 --- a/drivers/clk/clk-gpio-gate.c +++ b/drivers/clk/clk-gpio-gate.c @@ -13,6 +13,7 @@ #include #include #include +#include #include #include #include -- cgit v1.2.3-70-g09d2 From bda003036684b9779fca2b3d457621eaff9bcd0a Mon Sep 17 00:00:00 2001 From: Robert Jarzmik Date: Wed, 30 Jul 2014 22:50:59 +0200 Subject: clk: add pxa clocks infrastructure Add a the common code used by all PXA variants. This is the first step in the transition from architecture defined clocks (in arch/arm/mach-pxa) towards clock framework. The goal is to have the same features (and not all the features) of the existing clocks, and enable the transition of PXA to device-tree. All PXA rely on a "CKEN" type clock, which : - has a gate (bit in CKEN register) - is generated from a PLL, generally divided - has an alternate low power clock Each variant will specialize the CKEN clock : - pxa25x have no low power clock - pxa27x in low power use always the 13 MHz ring oscillator - pxa3xx in low power have specific dividers for each clock The device-tree provides a list of CLK_* (ex: CLK_USB or CLK_I2C) to get a handle on the clock. While pxa-clock.h will describe all the clocks of all the variants, each variant will only use a subset of it. Signed-off-by: Robert Jarzmik Signed-off-by: Mike Turquette --- drivers/clk/Makefile | 1 + drivers/clk/pxa/Makefile | 1 + drivers/clk/pxa/clk-pxa.c | 97 ++++++++++++++++++++++++++++++ drivers/clk/pxa/clk-pxa.h | 107 ++++++++++++++++++++++++++++++++++ include/dt-bindings/clock/pxa-clock.h | 77 ++++++++++++++++++++++++ 5 files changed, 283 insertions(+) create mode 100644 drivers/clk/pxa/Makefile create mode 100644 drivers/clk/pxa/clk-pxa.c create mode 100644 drivers/clk/pxa/clk-pxa.h create mode 100644 include/dt-bindings/clock/pxa-clock.h (limited to 'drivers/clk') diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile index f537a0b1f79..7891e4edaa0 100644 --- a/drivers/clk/Makefile +++ b/drivers/clk/Makefile @@ -48,6 +48,7 @@ obj-$(CONFIG_ARCH_MMP) += mmp/ endif obj-$(CONFIG_PLAT_ORION) += mvebu/ obj-$(CONFIG_ARCH_MXS) += mxs/ +obj-$(CONFIG_ARCH_PXA) += pxa/ obj-$(CONFIG_COMMON_CLK_QCOM) += qcom/ obj-$(CONFIG_ARCH_ROCKCHIP) += rockchip/ obj-$(CONFIG_COMMON_CLK_SAMSUNG) += samsung/ diff --git a/drivers/clk/pxa/Makefile b/drivers/clk/pxa/Makefile new file mode 100644 index 00000000000..cb2bd8ff53d --- /dev/null +++ b/drivers/clk/pxa/Makefile @@ -0,0 +1 @@ +obj-y += clk-pxa.o diff --git a/drivers/clk/pxa/clk-pxa.c b/drivers/clk/pxa/clk-pxa.c new file mode 100644 index 00000000000..ef3c05389c0 --- /dev/null +++ b/drivers/clk/pxa/clk-pxa.c @@ -0,0 +1,97 @@ +/* + * Marvell PXA family clocks + * + * Copyright (C) 2014 Robert Jarzmik + * + * Common clock code for PXA clocks ("CKEN" type clocks + DT) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + */ +#include +#include +#include +#include + +#include +#include "clk-pxa.h" + +DEFINE_SPINLOCK(lock); + +static struct clk *pxa_clocks[CLK_MAX]; +static struct clk_onecell_data onecell_data = { + .clks = pxa_clocks, + .clk_num = CLK_MAX, +}; + +#define to_pxa_clk(_hw) container_of(_hw, struct pxa_clk_cken, hw) + +static unsigned long cken_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + struct pxa_clk_cken *pclk = to_pxa_clk(hw); + struct clk_fixed_factor *fix; + + if (!pclk->is_in_low_power || pclk->is_in_low_power()) + fix = &pclk->lp; + else + fix = &pclk->hp; + fix->hw.clk = hw->clk; + return clk_fixed_factor_ops.recalc_rate(&fix->hw, parent_rate); +} + +static struct clk_ops cken_rate_ops = { + .recalc_rate = cken_recalc_rate, +}; + +static u8 cken_get_parent(struct clk_hw *hw) +{ + struct pxa_clk_cken *pclk = to_pxa_clk(hw); + + if (!pclk->is_in_low_power) + return 0; + return pclk->is_in_low_power() ? 0 : 1; +} + +static struct clk_ops cken_mux_ops = { + .get_parent = cken_get_parent, + .set_parent = dummy_clk_set_parent, +}; + +void __init clkdev_pxa_register(int ckid, const char *con_id, + const char *dev_id, struct clk *clk) +{ + if (!IS_ERR(clk) && (ckid != CLK_NONE)) + pxa_clocks[ckid] = clk; + if (!IS_ERR(clk)) + clk_register_clkdev(clk, con_id, dev_id); +} + +int __init clk_pxa_cken_init(struct pxa_clk_cken *clks, int nb_clks) +{ + int i; + struct pxa_clk_cken *pclk; + struct clk *clk; + + for (i = 0; i < nb_clks; i++) { + pclk = clks + i; + pclk->gate.lock = &lock; + clk = clk_register_composite(NULL, pclk->name, + pclk->parent_names, 2, + &pclk->hw, &cken_mux_ops, + &pclk->hw, &cken_rate_ops, + &pclk->gate.hw, &clk_gate_ops, + pclk->flags); + clkdev_pxa_register(pclk->ckid, pclk->con_id, pclk->dev_id, + clk); + } + return 0; +} + +static void __init pxa_dt_clocks_init(struct device_node *np) +{ + of_clk_add_provider(np, of_clk_src_onecell_get, &onecell_data); +} +CLK_OF_DECLARE(pxa_clks, "marvell,pxa-clocks", pxa_dt_clocks_init); diff --git a/drivers/clk/pxa/clk-pxa.h b/drivers/clk/pxa/clk-pxa.h new file mode 100644 index 00000000000..5fe219d06b4 --- /dev/null +++ b/drivers/clk/pxa/clk-pxa.h @@ -0,0 +1,107 @@ +/* + * Marvell PXA family clocks + * + * Copyright (C) 2014 Robert Jarzmik + * + * Common clock code for PXA clocks ("CKEN" type clocks + DT) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + */ +#ifndef _CLK_PXA_ +#define _CLK_PXA_ + +#define PARENTS(name) \ + static const char *name ## _parents[] __initconst +#define MUX_RO_RATE_RO_OPS(name, clk_name) \ + static struct clk_hw name ## _mux_hw; \ + static struct clk_hw name ## _rate_hw; \ + static struct clk_ops name ## _mux_ops = { \ + .get_parent = name ## _get_parent, \ + .set_parent = dummy_clk_set_parent, \ + }; \ + static struct clk_ops name ## _rate_ops = { \ + .recalc_rate = name ## _get_rate, \ + }; \ + static struct clk *clk_register_ ## name(void) \ + { \ + return clk_register_composite(NULL, clk_name, \ + name ## _parents, \ + ARRAY_SIZE(name ## _parents), \ + &name ## _mux_hw, &name ## _mux_ops, \ + &name ## _rate_hw, &name ## _rate_ops, \ + NULL, NULL, CLK_GET_RATE_NOCACHE); \ + } + +#define RATE_RO_OPS(name, clk_name) \ + static struct clk_hw name ## _rate_hw; \ + static struct clk_ops name ## _rate_ops = { \ + .recalc_rate = name ## _get_rate, \ + }; \ + static struct clk *clk_register_ ## name(void) \ + { \ + return clk_register_composite(NULL, clk_name, \ + name ## _parents, \ + ARRAY_SIZE(name ## _parents), \ + NULL, NULL, \ + &name ## _rate_hw, &name ## _rate_ops, \ + NULL, NULL, CLK_GET_RATE_NOCACHE); \ + } + +/* + * CKEN clock type + * This clock takes it source from 2 possible parents : + * - a low power parent + * - a normal parent + * + * +------------+ +-----------+ + * | Low Power | --- | x mult_lp | + * | Clock | | / div_lp |\ + * +------------+ +-----------+ \+-----+ +-----------+ + * | Mux |---| CKEN gate | + * +------------+ +-----------+ /+-----+ +-----------+ + * | High Power | | x mult_hp |/ + * | Clock | --- | / div_hp | + * +------------+ +-----------+ + */ +struct pxa_clk_cken { + struct clk_hw hw; + int ckid; + const char *name; + const char *dev_id; + const char *con_id; + const char **parent_names; + struct clk_fixed_factor lp; + struct clk_fixed_factor hp; + struct clk_gate gate; + bool (*is_in_low_power)(void); + const unsigned long flags; +}; + +#define PXA_CKEN(_dev_id, _con_id, _name, parents, _mult_lp, _div_lp, \ + _mult_hp, _div_hp, is_lp, _cken_reg, _cken_bit, flag) \ + { .ckid = CLK_ ## _name, .name = #_name, \ + .dev_id = _dev_id, .con_id = _con_id, .parent_names = parents,\ + .lp = { .mult = _mult_lp, .div = _div_lp }, \ + .hp = { .mult = _mult_hp, .div = _div_hp }, \ + .is_in_low_power = is_lp, \ + .gate = { .reg = (void __iomem *)_cken_reg, .bit_idx = _cken_bit }, \ + .flags = flag, \ + } +#define PXA_CKEN_1RATE(dev_id, con_id, name, parents, cken_reg, \ + cken_bit, flag) \ + PXA_CKEN(dev_id, con_id, name, parents, 1, 1, 1, 1, \ + NULL, cken_reg, cken_bit, flag) + +static int dummy_clk_set_parent(struct clk_hw *hw, u8 index) +{ + return 0; +} + +extern void clkdev_pxa_register(int ckid, const char *con_id, + const char *dev_id, struct clk *clk); +extern int clk_pxa_cken_init(struct pxa_clk_cken *clks, int nb_clks); + +#endif diff --git a/include/dt-bindings/clock/pxa-clock.h b/include/dt-bindings/clock/pxa-clock.h new file mode 100644 index 00000000000..e65803b1dc7 --- /dev/null +++ b/include/dt-bindings/clock/pxa-clock.h @@ -0,0 +1,77 @@ +/* + * Inspired by original work from pxa2xx-regs.h by Nicolas Pitre + * Copyright (C) 2014 Robert Jarzmik + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef __DT_BINDINGS_CLOCK_PXA2XX_H__ +#define __DT_BINDINGS_CLOCK_PXA2XX_H__ + +#define CLK_NONE 0 +#define CLK_1WIRE 1 +#define CLK_AC97 2 +#define CLK_AC97CONF 3 +#define CLK_ASSP 4 +#define CLK_BOOT 5 +#define CLK_BTUART 6 +#define CLK_CAMERA 7 +#define CLK_CIR 8 +#define CLK_CORE 9 +#define CLK_DMC 10 +#define CLK_FFUART 11 +#define CLK_FICP 12 +#define CLK_GPIO 13 +#define CLK_HSIO2 14 +#define CLK_HWUART 15 +#define CLK_I2C 16 +#define CLK_I2S 17 +#define CLK_IM 18 +#define CLK_INC 19 +#define CLK_ISC 20 +#define CLK_KEYPAD 21 +#define CLK_LCD 22 +#define CLK_MEMC 23 +#define CLK_MEMSTK 24 +#define CLK_MINI_IM 25 +#define CLK_MINI_LCD 26 +#define CLK_MMC 27 +#define CLK_MMC1 28 +#define CLK_MMC2 29 +#define CLK_MMC3 30 +#define CLK_MSL 31 +#define CLK_MSL0 32 +#define CLK_MVED 33 +#define CLK_NAND 34 +#define CLK_NSSP 35 +#define CLK_OSTIMER 36 +#define CLK_PWM0 37 +#define CLK_PWM1 38 +#define CLK_PWM2 39 +#define CLK_PWM3 40 +#define CLK_PWRI2C 41 +#define CLK_PXA300_GCU 42 +#define CLK_PXA320_GCU 43 +#define CLK_SMC 44 +#define CLK_SSP 45 +#define CLK_SSP1 46 +#define CLK_SSP2 47 +#define CLK_SSP3 48 +#define CLK_SSP4 49 +#define CLK_STUART 50 +#define CLK_TOUCH 51 +#define CLK_TPM 52 +#define CLK_UDC 53 +#define CLK_USB 54 +#define CLK_USB2 55 +#define CLK_USBH 56 +#define CLK_USBHOST 57 +#define CLK_USIM 58 +#define CLK_USIM1 59 +#define CLK_USMI0 60 +#define CLK_MAX 61 + +#endif -- cgit v1.2.3-70-g09d2 From d40670dc616936ed12335b9408087c9923939f1f Mon Sep 17 00:00:00 2001 From: Robert Jarzmik Date: Wed, 30 Jul 2014 22:51:02 +0200 Subject: clk: add pxa27x clock drivers Move pxa27x clock drivers from arch/arm/mach-pxa to driver/clk. In the move : - convert to new clock framework legacy clocks - provide clocks as before for platform data based boards - provide clocks through devicetree Signed-off-by: Robert Jarzmik Signed-off-by: Mike Turquette --- drivers/clk/pxa/Makefile | 1 + drivers/clk/pxa/clk-pxa27x.c | 370 +++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 371 insertions(+) create mode 100644 drivers/clk/pxa/clk-pxa27x.c (limited to 'drivers/clk') diff --git a/drivers/clk/pxa/Makefile b/drivers/clk/pxa/Makefile index cb2bd8ff53d..4ff2abcd500 100644 --- a/drivers/clk/pxa/Makefile +++ b/drivers/clk/pxa/Makefile @@ -1 +1,2 @@ obj-y += clk-pxa.o +obj-$(CONFIG_PXA27x) += clk-pxa27x.o diff --git a/drivers/clk/pxa/clk-pxa27x.c b/drivers/clk/pxa/clk-pxa27x.c new file mode 100644 index 00000000000..b345cc791e5 --- /dev/null +++ b/drivers/clk/pxa/clk-pxa27x.c @@ -0,0 +1,370 @@ +/* + * Marvell PXA27x family clocks + * + * Copyright (C) 2014 Robert Jarzmik + * + * Heavily inspired from former arch/arm/mach-pxa/clock.c. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + */ +#include +#include +#include +#include +#include +#include + +#include +#include "clk-pxa.h" + +#define KHz 1000 +#define MHz (1000 * 1000) + +enum { + PXA_CORE_13Mhz = 0, + PXA_CORE_RUN, + PXA_CORE_TURBO, +}; + +enum { + PXA_BUS_13Mhz = 0, + PXA_BUS_RUN, +}; + +enum { + PXA_LCD_13Mhz = 0, + PXA_LCD_RUN, +}; + +enum { + PXA_MEM_13Mhz = 0, + PXA_MEM_SYSTEM_BUS, + PXA_MEM_RUN, +}; + +static const char * const get_freq_khz[] = { + "core", "run", "cpll", "memory", + "system_bus" +}; + +/* + * Get the clock frequency as reflected by CCSR and the turbo flag. + * We assume these values have been applied via a fcs. + * If info is not 0 we also display the current settings. + */ +unsigned int pxa27x_get_clk_frequency_khz(int info) +{ + struct clk *clk; + unsigned long clks[5]; + int i; + + for (i = 0; i < 5; i++) { + clk = clk_get(NULL, get_freq_khz[i]); + if (IS_ERR(clk)) { + clks[i] = 0; + } else { + clks[i] = clk_get_rate(clk); + clk_put(clk); + } + } + if (info) { + pr_info("Run Mode clock: %ld.%02ldMHz\n", + clks[1] / 1000000, (clks[1] % 1000000) / 10000); + pr_info("Turbo Mode clock: %ld.%02ldMHz\n", + clks[2] / 1000000, (clks[2] % 1000000) / 10000); + pr_info("Memory clock: %ld.%02ldMHz\n", + clks[3] / 1000000, (clks[3] % 1000000) / 10000); + pr_info("System bus clock: %ld.%02ldMHz\n", + clks[4] / 1000000, (clks[4] % 1000000) / 10000); + } + return (unsigned int)clks[0]; +} + +bool pxa27x_is_ppll_disabled(void) +{ + unsigned long ccsr = CCSR; + + return ccsr & (1 << CCCR_PPDIS_BIT); +} + +#define PXA27X_CKEN(dev_id, con_id, parents, mult_hp, div_hp, \ + bit, is_lp, flags) \ + PXA_CKEN(dev_id, con_id, bit, parents, 1, 1, mult_hp, div_hp, \ + is_lp, &CKEN, CKEN_ ## bit, flags) +#define PXA27X_PBUS_CKEN(dev_id, con_id, bit, mult_hp, div_hp, delay) \ + PXA27X_CKEN(dev_id, con_id, pxa27x_pbus_parents, mult_hp, \ + div_hp, bit, pxa27x_is_ppll_disabled, 0) + +PARENTS(pxa27x_pbus) = { "osc_13mhz", "ppll_312mhz" }; +PARENTS(pxa27x_sbus) = { "system_bus", "system_bus" }; +PARENTS(pxa27x_32Mhz_bus) = { "osc_32_768khz", "osc_32_768khz" }; +PARENTS(pxa27x_lcd_bus) = { "lcd_base", "lcd_base" }; +PARENTS(pxa27x_membus) = { "lcd_base", "lcd_base" }; + +#define PXA27X_CKEN_1RATE(dev_id, con_id, bit, parents, delay) \ + PXA_CKEN_1RATE(dev_id, con_id, bit, parents, \ + &CKEN, CKEN_ ## bit, 0) +#define PXA27X_CKEN_1RATE_AO(dev_id, con_id, bit, parents, delay) \ + PXA_CKEN_1RATE(dev_id, con_id, bit, parents, \ + &CKEN, CKEN_ ## bit, CLK_IGNORE_UNUSED) + +static struct pxa_clk_cken pxa27x_clocks[] = { + PXA27X_PBUS_CKEN("pxa2xx-uart.0", NULL, FFUART, 2, 42, 1), + PXA27X_PBUS_CKEN("pxa2xx-uart.1", NULL, BTUART, 2, 42, 1), + PXA27X_PBUS_CKEN("pxa2xx-uart.2", NULL, STUART, 2, 42, 1), + PXA27X_PBUS_CKEN("pxa2xx-i2s", NULL, I2S, 2, 51, 0), + PXA27X_PBUS_CKEN("pxa2xx-i2c.0", NULL, I2C, 2, 19, 0), + PXA27X_PBUS_CKEN("pxa27x-udc", NULL, USB, 2, 13, 5), + PXA27X_PBUS_CKEN("pxa2xx-mci.0", NULL, MMC, 2, 32, 0), + PXA27X_PBUS_CKEN("pxa2xx-ir", "FICPCLK", FICP, 2, 13, 0), + PXA27X_PBUS_CKEN("pxa27x-ohci", NULL, USBHOST, 2, 13, 0), + PXA27X_PBUS_CKEN("pxa2xx-i2c.1", NULL, PWRI2C, 1, 24, 0), + PXA27X_PBUS_CKEN("pxa27x-ssp.0", NULL, SSP1, 1, 24, 0), + PXA27X_PBUS_CKEN("pxa27x-ssp.1", NULL, SSP2, 1, 24, 0), + PXA27X_PBUS_CKEN("pxa27x-ssp.2", NULL, SSP3, 1, 24, 0), + PXA27X_PBUS_CKEN("pxa27x-pwm.0", NULL, PWM0, 1, 24, 0), + PXA27X_PBUS_CKEN("pxa27x-pwm.1", NULL, PWM1, 1, 24, 0), + PXA27X_PBUS_CKEN(NULL, "MSLCLK", MSL, 2, 13, 0), + PXA27X_PBUS_CKEN(NULL, "USIMCLK", USIM, 2, 13, 0), + PXA27X_PBUS_CKEN(NULL, "MSTKCLK", MEMSTK, 2, 32, 0), + PXA27X_PBUS_CKEN(NULL, "AC97CLK", AC97, 1, 1, 0), + PXA27X_PBUS_CKEN(NULL, "AC97CONFCLK", AC97CONF, 1, 1, 0), + PXA27X_PBUS_CKEN(NULL, "OSTIMER0", OSTIMER, 1, 96, 0), + + PXA27X_CKEN_1RATE("pxa27x-keypad", NULL, KEYPAD, + pxa27x_32Mhz_bus_parents, 0), + PXA27X_CKEN_1RATE(NULL, "IMCLK", IM, pxa27x_sbus_parents, 0), + PXA27X_CKEN_1RATE("pxa2xx-fb", NULL, LCD, pxa27x_lcd_bus_parents, 0), + PXA27X_CKEN_1RATE("pxa27x-camera.0", NULL, CAMERA, + pxa27x_lcd_bus_parents, 0), + PXA27X_CKEN_1RATE_AO("pxa2xx-pcmcia", NULL, MEMC, + pxa27x_membus_parents, 0), + +}; + +static unsigned long clk_pxa27x_cpll_get_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + unsigned long clkcfg; + unsigned int t, ht; + unsigned int l, L, n2, N; + unsigned long ccsr = CCSR; + + asm("mrc\tp14, 0, %0, c6, c0, 0" : "=r" (clkcfg)); + t = clkcfg & (1 << 0); + ht = clkcfg & (1 << 2); + + l = ccsr & CCSR_L_MASK; + n2 = (ccsr & CCSR_N2_MASK) >> CCSR_N2_SHIFT; + L = l * parent_rate; + N = (L * n2) / 2; + + return t ? N : L; +} +PARENTS(clk_pxa27x_cpll) = { "osc_13mhz" }; +RATE_RO_OPS(clk_pxa27x_cpll, "cpll"); + +static unsigned long clk_pxa27x_lcd_base_get_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + unsigned int l, osc_forced; + unsigned long ccsr = CCSR; + unsigned long cccr = CCCR; + + l = ccsr & CCSR_L_MASK; + osc_forced = ccsr & (1 << CCCR_CPDIS_BIT); + if (osc_forced) { + if (cccr & (1 << CCCR_LCD_26_BIT)) + return parent_rate * 2; + else + return parent_rate; + } + + if (l <= 7) + return parent_rate; + if (l <= 16) + return parent_rate / 2; + return parent_rate / 4; +} + +static u8 clk_pxa27x_lcd_base_get_parent(struct clk_hw *hw) +{ + unsigned int osc_forced; + unsigned long ccsr = CCSR; + + osc_forced = ccsr & (1 << CCCR_CPDIS_BIT); + if (osc_forced) + return PXA_LCD_13Mhz; + else + return PXA_LCD_RUN; +} + +PARENTS(clk_pxa27x_lcd_base) = { "osc_13mhz", "run" }; +MUX_RO_RATE_RO_OPS(clk_pxa27x_lcd_base, "lcd_base"); + +static void __init pxa27x_register_plls(void) +{ + clk_register_fixed_rate(NULL, "osc_13mhz", NULL, + CLK_GET_RATE_NOCACHE | CLK_IS_ROOT, + 13 * MHz); + clk_register_fixed_rate(NULL, "osc_32_768khz", NULL, + CLK_GET_RATE_NOCACHE | CLK_IS_ROOT, + 32768 * KHz); + clk_register_fixed_rate(NULL, "clk_dummy", NULL, CLK_IS_ROOT, 0); + clk_register_fixed_factor(NULL, "ppll_312mhz", "osc_13mhz", 0, 24, 1); +} + +static unsigned long clk_pxa27x_core_get_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + unsigned long clkcfg; + unsigned int t, ht, b, osc_forced; + unsigned long ccsr = CCSR; + + osc_forced = ccsr & (1 << CCCR_CPDIS_BIT); + asm("mrc\tp14, 0, %0, c6, c0, 0" : "=r" (clkcfg)); + t = clkcfg & (1 << 0); + ht = clkcfg & (1 << 2); + b = clkcfg & (1 << 3); + + if (osc_forced) + return parent_rate; + if (ht) + return parent_rate / 2; + else + return parent_rate; +} + +static u8 clk_pxa27x_core_get_parent(struct clk_hw *hw) +{ + unsigned long clkcfg; + unsigned int t, ht, b, osc_forced; + unsigned long ccsr = CCSR; + + osc_forced = ccsr & (1 << CCCR_CPDIS_BIT); + if (osc_forced) + return PXA_CORE_13Mhz; + + asm("mrc\tp14, 0, %0, c6, c0, 0" : "=r" (clkcfg)); + t = clkcfg & (1 << 0); + ht = clkcfg & (1 << 2); + b = clkcfg & (1 << 3); + + if (ht || t) + return PXA_CORE_TURBO; + return PXA_CORE_RUN; +} +PARENTS(clk_pxa27x_core) = { "osc_13mhz", "run", "cpll" }; +MUX_RO_RATE_RO_OPS(clk_pxa27x_core, "core"); + +static unsigned long clk_pxa27x_run_get_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + unsigned long ccsr = CCSR; + unsigned int n2 = (ccsr & CCSR_N2_MASK) >> CCSR_N2_SHIFT; + + return (parent_rate / n2) * 2; +} +PARENTS(clk_pxa27x_run) = { "cpll" }; +RATE_RO_OPS(clk_pxa27x_run, "run"); + +static void __init pxa27x_register_core(void) +{ + clk_register_clk_pxa27x_cpll(); + clk_register_clk_pxa27x_run(); + + clkdev_pxa_register(CLK_CORE, "core", NULL, + clk_register_clk_pxa27x_core()); +} + +static unsigned long clk_pxa27x_system_bus_get_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + unsigned long clkcfg; + unsigned int b, osc_forced; + unsigned long ccsr = CCSR; + + osc_forced = ccsr & (1 << CCCR_CPDIS_BIT); + asm("mrc\tp14, 0, %0, c6, c0, 0" : "=r" (clkcfg)); + b = clkcfg & (1 << 3); + + if (osc_forced) + return parent_rate; + if (b) + return parent_rate / 2; + else + return parent_rate; +} + +static u8 clk_pxa27x_system_bus_get_parent(struct clk_hw *hw) +{ + unsigned int osc_forced; + unsigned long ccsr = CCSR; + + osc_forced = ccsr & (1 << CCCR_CPDIS_BIT); + if (osc_forced) + return PXA_BUS_13Mhz; + else + return PXA_BUS_RUN; +} + +PARENTS(clk_pxa27x_system_bus) = { "osc_13mhz", "run" }; +MUX_RO_RATE_RO_OPS(clk_pxa27x_system_bus, "system_bus"); + +static unsigned long clk_pxa27x_memory_get_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + unsigned int a, l, osc_forced; + unsigned long cccr = CCCR; + unsigned long ccsr = CCSR; + + osc_forced = ccsr & (1 << CCCR_CPDIS_BIT); + a = cccr & CCCR_A_BIT; + l = ccsr & CCSR_L_MASK; + + if (osc_forced || a) + return parent_rate; + if (l <= 10) + return parent_rate; + if (l <= 20) + return parent_rate / 2; + return parent_rate / 4; +} + +static u8 clk_pxa27x_memory_get_parent(struct clk_hw *hw) +{ + unsigned int osc_forced, a; + unsigned long cccr = CCCR; + unsigned long ccsr = CCSR; + + osc_forced = ccsr & (1 << CCCR_CPDIS_BIT); + a = cccr & CCCR_A_BIT; + if (osc_forced) + return PXA_MEM_13Mhz; + if (a) + return PXA_MEM_SYSTEM_BUS; + else + return PXA_MEM_RUN; +} + +PARENTS(clk_pxa27x_memory) = { "osc_13mhz", "system_bus", "run" }; +MUX_RO_RATE_RO_OPS(clk_pxa27x_memory, "memory"); + +static void __init pxa27x_base_clocks_init(void) +{ + pxa27x_register_plls(); + pxa27x_register_core(); + clk_register_clk_pxa27x_system_bus(); + clk_register_clk_pxa27x_memory(); + clk_register_clk_pxa27x_lcd_base(); +} + +static int __init pxa27x_clocks_init(void) +{ + pxa27x_base_clocks_init(); + return clk_pxa_cken_init(pxa27x_clocks, ARRAY_SIZE(pxa27x_clocks)); +} +postcore_initcall(pxa27x_clocks_init); -- cgit v1.2.3-70-g09d2 From fc69ed70c16a31d6a77ec47a30a9fe941f763f1e Mon Sep 17 00:00:00 2001 From: Jianqun Date: Tue, 30 Sep 2014 11:12:04 +0800 Subject: clk: rockchip: rk3288: i2s_frac adds flag to set parent's rate The relation of i2s nodes as follows: i2s_src 0 0 594000000 0 i2s_frac 0 0 11289600 0 i2s_pre 0 0 11289600 0 sclk_i2s0 0 0 11289600 0 i2s0_clkout 0 0 11289600 0 hclk_i2s0 1 1 99000000 0 sclk_i2s0 is the master clock, when to set rate of sclk_i2s0, should allow to set its parent's rate, by add flag CLK_SET_RATE_PARENT for "i2s_frac", "i2s_pre", "i2s0_clkout" and "sclk_i2s0". Tested on rk3288 board using max98090, with command "aplay " Change-Id: I12faad082566532b65a7de8c0a6845e1c17870e6 Signed-off-by: Jianqun Signed-off-by: Heiko Stuebner --- drivers/clk/rockchip/clk-rk3288.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers/clk') diff --git a/drivers/clk/rockchip/clk-rk3288.c b/drivers/clk/rockchip/clk-rk3288.c index d053529113f..b488f6a48d1 100644 --- a/drivers/clk/rockchip/clk-rk3288.c +++ b/drivers/clk/rockchip/clk-rk3288.c @@ -300,15 +300,15 @@ static struct rockchip_clk_branch rk3288_clk_branches[] __initdata = { COMPOSITE(0, "i2s_src", mux_pll_src_cpll_gpll_p, 0, RK3288_CLKSEL_CON(4), 15, 1, MFLAGS, 0, 7, DFLAGS, RK3288_CLKGATE_CON(4), 1, GFLAGS), - COMPOSITE_FRAC(0, "i2s_frac", "i2s_src", 0, + COMPOSITE_FRAC(0, "i2s_frac", "i2s_src", CLK_SET_RATE_PARENT, RK3288_CLKSEL_CON(8), 0, RK3288_CLKGATE_CON(4), 2, GFLAGS), - MUX(0, "i2s_pre", mux_i2s_pre_p, 0, + MUX(0, "i2s_pre", mux_i2s_pre_p, CLK_SET_RATE_PARENT, RK3288_CLKSEL_CON(4), 8, 2, MFLAGS), - COMPOSITE_NODIV(0, "i2s0_clkout", mux_i2s_clkout_p, 0, + COMPOSITE_NODIV(0, "i2s0_clkout", mux_i2s_clkout_p, CLK_SET_RATE_PARENT, RK3288_CLKSEL_CON(4), 12, 1, MFLAGS, RK3288_CLKGATE_CON(4), 0, GFLAGS), - GATE(SCLK_I2S0, "sclk_i2s0", "i2s_pre", 0, + GATE(SCLK_I2S0, "sclk_i2s0", "i2s_pre", CLK_SET_RATE_PARENT, RK3288_CLKGATE_CON(4), 3, GFLAGS), MUX(0, "spdif_src", mux_pll_src_cpll_gpll_p, 0, -- cgit v1.2.3-70-g09d2 From 6f1294b5a87238c2f87f74a9942faf2f4ffa63b2 Mon Sep 17 00:00:00 2001 From: Heiko Stübner Date: Tue, 19 Aug 2014 17:45:38 -0700 Subject: clk: rockchip: add restart handler Add infrastructure to write the correct value to the restart register and register the restart notifier for both rk3188 (including rk3066) and rk3288. Signed-off-by: Heiko Stuebner Signed-off-by: Guenter Roeck --- drivers/clk/rockchip/clk-rk3188.c | 2 ++ drivers/clk/rockchip/clk-rk3288.c | 2 ++ drivers/clk/rockchip/clk.c | 25 +++++++++++++++++++++++++ drivers/clk/rockchip/clk.h | 1 + 4 files changed, 30 insertions(+) (limited to 'drivers/clk') diff --git a/drivers/clk/rockchip/clk-rk3188.c b/drivers/clk/rockchip/clk-rk3188.c index ceabce59549..beed49c7912 100644 --- a/drivers/clk/rockchip/clk-rk3188.c +++ b/drivers/clk/rockchip/clk-rk3188.c @@ -735,6 +735,8 @@ static void __init rk3188_common_clk_init(struct device_node *np) rockchip_register_softrst(np, 9, reg_base + RK2928_SOFTRST_CON(0), ROCKCHIP_SOFTRST_HIWORD_MASK); + + rockchip_register_restart_notifier(RK2928_GLB_SRST_FST); } static void __init rk3066a_clk_init(struct device_node *np) diff --git a/drivers/clk/rockchip/clk-rk3288.c b/drivers/clk/rockchip/clk-rk3288.c index b488f6a48d1..23278291da4 100644 --- a/drivers/clk/rockchip/clk-rk3288.c +++ b/drivers/clk/rockchip/clk-rk3288.c @@ -808,5 +808,7 @@ static void __init rk3288_clk_init(struct device_node *np) rockchip_register_softrst(np, 12, reg_base + RK3288_SOFTRST_CON(0), ROCKCHIP_SOFTRST_HIWORD_MASK); + + rockchip_register_restart_notifier(RK3288_GLB_SRST_FST); } CLK_OF_DECLARE(rk3288_cru, "rockchip,rk3288-cru", rk3288_clk_init); diff --git a/drivers/clk/rockchip/clk.c b/drivers/clk/rockchip/clk.c index fd3b5ef87e2..1e68bff481b 100644 --- a/drivers/clk/rockchip/clk.c +++ b/drivers/clk/rockchip/clk.c @@ -25,6 +25,7 @@ #include #include #include +#include #include "clk.h" /** @@ -330,3 +331,27 @@ void __init rockchip_clk_protect_critical(const char *clocks[], int nclocks) clk_prepare_enable(clk); } } + +static unsigned int reg_restart; +static int rockchip_restart_notify(struct notifier_block *this, + unsigned long mode, void *cmd) +{ + writel(0xfdb9, reg_base + reg_restart); + return NOTIFY_DONE; +} + +static struct notifier_block rockchip_restart_handler = { + .notifier_call = rockchip_restart_notify, + .priority = 128, +}; + +void __init rockchip_register_restart_notifier(unsigned int reg) +{ + int ret; + + reg_restart = reg; + ret = register_restart_handler(&rockchip_restart_handler); + if (ret) + pr_err("%s: cannot register restart handler, %d\n", + __func__, ret); +} diff --git a/drivers/clk/rockchip/clk.h b/drivers/clk/rockchip/clk.h index f4791fbb3da..ca009ab0a33 100644 --- a/drivers/clk/rockchip/clk.h +++ b/drivers/clk/rockchip/clk.h @@ -367,6 +367,7 @@ void rockchip_clk_register_armclk(unsigned int lookup_id, const char *name, const struct rockchip_cpuclk_rate_table *rates, int nrates); void rockchip_clk_protect_critical(const char *clocks[], int nclocks); +void rockchip_register_restart_notifier(unsigned int reg); #define ROCKCHIP_SOFTRST_HIWORD_MASK BIT(0) -- cgit v1.2.3-70-g09d2 From e317c19470f6d690122519bf9ed1c9f21ea11906 Mon Sep 17 00:00:00 2001 From: Heiko Stübner Date: Tue, 19 Aug 2014 17:45:37 -0700 Subject: clk: samsung: register restart handlers for s3c2412 and s3c2443 S3C2412, S3C2443 and their derivatives contain a special software-reset register in their system-controller. Therefore register a restart handler for those. Tested on a s3c2416-based board, s3c2412 compile-tested. Signed-off-by: Heiko Stuebner Signed-off-by: Guenter Roeck --- drivers/clk/samsung/clk-s3c2412.c | 29 +++++++++++++++++++++++++++++ drivers/clk/samsung/clk-s3c2443.c | 19 +++++++++++++++++++ 2 files changed, 48 insertions(+) (limited to 'drivers/clk') diff --git a/drivers/clk/samsung/clk-s3c2412.c b/drivers/clk/samsung/clk-s3c2412.c index 34af09f6a15..2ceedaf8ce1 100644 --- a/drivers/clk/samsung/clk-s3c2412.c +++ b/drivers/clk/samsung/clk-s3c2412.c @@ -14,6 +14,7 @@ #include #include #include +#include #include @@ -26,6 +27,7 @@ #define CLKCON 0x0c #define CLKDIVN 0x14 #define CLKSRC 0x1c +#define SWRST 0x30 /* list of PLLs to be registered */ enum s3c2412_plls { @@ -204,6 +206,28 @@ struct samsung_clock_alias s3c2412_aliases[] __initdata = { ALIAS(MSYSCLK, NULL, "fclk"), }; +static int s3c2412_restart(struct notifier_block *this, + unsigned long mode, void *cmd) +{ + /* errata "Watch-dog/Software Reset Problem" specifies that + * this reset must be done with the SYSCLK sourced from + * EXTCLK instead of FOUT to avoid a glitch in the reset + * mechanism. + * + * See the watchdog section of the S3C2412 manual for more + * information on this fix. + */ + + __raw_writel(0x00, reg_base + CLKSRC); + __raw_writel(0x533C2412, reg_base + SWRST); + return NOTIFY_DONE; +} + +static struct notifier_block s3c2412_restart_handler = { + .notifier_call = s3c2412_restart, + .priority = 129, +}; + /* * fixed rate clocks generated outside the soc * Only necessary until the devicetree-move is complete @@ -233,6 +257,7 @@ void __init s3c2412_common_clk_init(struct device_node *np, unsigned long xti_f, unsigned long ext_f, void __iomem *base) { struct samsung_clk_provider *ctx; + int ret; reg_base = base; if (np) { @@ -267,6 +292,10 @@ void __init s3c2412_common_clk_init(struct device_node *np, unsigned long xti_f, s3c2412_clk_sleep_init(); samsung_clk_of_add_provider(np, ctx); + + ret = register_restart_handler(&s3c2412_restart_handler); + if (ret) + pr_warn("cannot register restart handler, %d\n", ret); } static void __init s3c2412_clk_init(struct device_node *np) diff --git a/drivers/clk/samsung/clk-s3c2443.c b/drivers/clk/samsung/clk-s3c2443.c index c92f853fca9..0c3c182b902 100644 --- a/drivers/clk/samsung/clk-s3c2443.c +++ b/drivers/clk/samsung/clk-s3c2443.c @@ -14,6 +14,7 @@ #include #include #include +#include #include @@ -33,6 +34,7 @@ #define HCLKCON 0x30 #define PCLKCON 0x34 #define SCLKCON 0x38 +#define SWRST 0x44 /* the soc types */ enum supported_socs { @@ -354,6 +356,18 @@ struct samsung_clock_alias s3c2450_aliases[] __initdata = { ALIAS(PCLK_I2C1, "s3c2410-i2c.1", "i2c"), }; +static int s3c2443_restart(struct notifier_block *this, + unsigned long mode, void *cmd) +{ + __raw_writel(0x533c2443, reg_base + SWRST); + return NOTIFY_DONE; +} + +static struct notifier_block s3c2443_restart_handler = { + .notifier_call = s3c2443_restart, + .priority = 129, +}; + /* * fixed rate clocks generated outside the soc * Only necessary until the devicetree-move is complete @@ -378,6 +392,7 @@ void __init s3c2443_common_clk_init(struct device_node *np, unsigned long xti_f, void __iomem *base) { struct samsung_clk_provider *ctx; + int ret; reg_base = base; if (np) { @@ -447,6 +462,10 @@ void __init s3c2443_common_clk_init(struct device_node *np, unsigned long xti_f, s3c2443_clk_sleep_init(); samsung_clk_of_add_provider(np, ctx); + + ret = register_restart_handler(&s3c2443_restart_handler); + if (ret) + pr_warn("cannot register restart handler, %d\n", ret); } static void __init s3c2416_clk_init(struct device_node *np) -- cgit v1.2.3-70-g09d2 From 98d147f50eb0ce4328e013f5f2c076896003c761 Mon Sep 17 00:00:00 2001 From: Robert Jarzmik Date: Wed, 1 Oct 2014 23:39:29 +0200 Subject: clk: pxa clocks build system fix Fix the building of pxa clock drivers so that the files are actually compiled if and only if COMMON_CLK was selected by the architecture. This prevents conflicts with mach-pxa clock legacy implementation. Signed-off-by: Robert Jarzmik Signed-off-by: Mike Turquette --- drivers/clk/Kconfig | 5 +++++ drivers/clk/Makefile | 2 +- 2 files changed, 6 insertions(+), 1 deletion(-) (limited to 'drivers/clk') diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig index 85131ae0b28..1d4d3fc182d 100644 --- a/drivers/clk/Kconfig +++ b/drivers/clk/Kconfig @@ -120,6 +120,11 @@ config COMMON_CLK_PALMAS This driver supports TI Palmas devices 32KHz output KG and KG_AUDIO using common clock framework. +config COMMON_CLK_PXA + def_bool COMMON_CLK && ARCH_PXA + ---help--- + Sypport for the Marvell PXA SoC. + source "drivers/clk/qcom/Kconfig" endmenu diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile index 8f3c04a9151..5eaf1b547f1 100644 --- a/drivers/clk/Makefile +++ b/drivers/clk/Makefile @@ -51,7 +51,7 @@ obj-$(CONFIG_ARCH_MMP) += mmp/ endif obj-$(CONFIG_PLAT_ORION) += mvebu/ obj-$(CONFIG_ARCH_MXS) += mxs/ -obj-$(CONFIG_ARCH_PXA) += pxa/ +obj-$(CONFIG_COMMON_CLK_PXA) += pxa/ obj-$(CONFIG_COMMON_CLK_QCOM) += qcom/ obj-$(CONFIG_ARCH_ROCKCHIP) += rockchip/ obj-$(CONFIG_COMMON_CLK_SAMSUNG) += samsung/ -- cgit v1.2.3-70-g09d2