From 9a32299394d8cce79ca7d0098dc32c4f14032dcd Mon Sep 17 00:00:00 2001 From: Philippe De Muyter Date: Fri, 12 Oct 2012 17:52:45 +0200 Subject: powerpc, dma: move bestcomm driver from arch/powerpc/sysdev to drivers/dma The bestcomm dma hardware, and some of its users like the FEC ethernet component, is used in different FreeScale parts, including non-powerpc parts like the ColdFire MCF547x & MCF548x families. Don't keep the driver hidden in arch/powerpc where it is inaccessible for other arches. .c files are moved to drivers/dma/bestcomm, while .h files are moved to include/linux/fsl/bestcomm. Makefiles, Kconfigs and #include directives are updated for the new file locations. Tested by recompiling for MPC5200 with all bestcomm users enabled. Signed-off-by: Philippe De Muyter Signed-off-by: Anatolij Gustschin --- drivers/dma/Kconfig | 2 + drivers/dma/Makefile | 1 + drivers/dma/bestcomm/Kconfig | 36 ++ drivers/dma/bestcomm/Makefile | 14 + drivers/dma/bestcomm/ata.c | 157 +++++++++ drivers/dma/bestcomm/bcom_ata_task.c | 67 ++++ drivers/dma/bestcomm/bcom_fec_rx_task.c | 78 +++++ drivers/dma/bestcomm/bcom_fec_tx_task.c | 91 +++++ drivers/dma/bestcomm/bcom_gen_bd_rx_task.c | 63 ++++ drivers/dma/bestcomm/bcom_gen_bd_tx_task.c | 69 ++++ drivers/dma/bestcomm/bestcomm.c | 532 +++++++++++++++++++++++++++++ drivers/dma/bestcomm/fec.c | 270 +++++++++++++++ drivers/dma/bestcomm/gen_bd.c | 354 +++++++++++++++++++ drivers/dma/bestcomm/sram.c | 178 ++++++++++ 14 files changed, 1912 insertions(+) create mode 100644 drivers/dma/bestcomm/Kconfig create mode 100644 drivers/dma/bestcomm/Makefile create mode 100644 drivers/dma/bestcomm/ata.c create mode 100644 drivers/dma/bestcomm/bcom_ata_task.c create mode 100644 drivers/dma/bestcomm/bcom_fec_rx_task.c create mode 100644 drivers/dma/bestcomm/bcom_fec_tx_task.c create mode 100644 drivers/dma/bestcomm/bcom_gen_bd_rx_task.c create mode 100644 drivers/dma/bestcomm/bcom_gen_bd_tx_task.c create mode 100644 drivers/dma/bestcomm/bestcomm.c create mode 100644 drivers/dma/bestcomm/fec.c create mode 100644 drivers/dma/bestcomm/gen_bd.c create mode 100644 drivers/dma/bestcomm/sram.c (limited to 'drivers/dma') diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig index d4c12180c65..40179e749f0 100644 --- a/drivers/dma/Kconfig +++ b/drivers/dma/Kconfig @@ -125,6 +125,8 @@ config MPC512X_DMA ---help--- Enable support for the Freescale MPC512x built-in DMA engine. +source "drivers/dma/bestcomm/Kconfig" + config MV_XOR bool "Marvell XOR engine support" depends on PLAT_ORION diff --git a/drivers/dma/Makefile b/drivers/dma/Makefile index 7428feaa870..642d96736cf 100644 --- a/drivers/dma/Makefile +++ b/drivers/dma/Makefile @@ -10,6 +10,7 @@ obj-$(CONFIG_INTEL_IOATDMA) += ioat/ obj-$(CONFIG_INTEL_IOP_ADMA) += iop-adma.o obj-$(CONFIG_FSL_DMA) += fsldma.o obj-$(CONFIG_MPC512X_DMA) += mpc512x_dma.o +obj-$(CONFIG_PPC_BESTCOMM) += bestcomm/ obj-$(CONFIG_MV_XOR) += mv_xor.o obj-$(CONFIG_DW_DMAC) += dw_dmac.o obj-$(CONFIG_AT_HDMAC) += at_hdmac.o diff --git a/drivers/dma/bestcomm/Kconfig b/drivers/dma/bestcomm/Kconfig new file mode 100644 index 00000000000..29e427085ef --- /dev/null +++ b/drivers/dma/bestcomm/Kconfig @@ -0,0 +1,36 @@ +# +# Kconfig options for Bestcomm +# + +config PPC_BESTCOMM + tristate "Bestcomm DMA engine support" + depends on PPC_MPC52xx + default n + select PPC_LIB_RHEAP + help + BestComm is the name of the communication coprocessor found + on the Freescale MPC5200 family of processor. Its usage is + optional for some drivers (like ATA), but required for + others (like FEC). + + If you want to use drivers that require DMA operations, + answer Y or M. Otherwise say N. + +config PPC_BESTCOMM_ATA + tristate + depends on PPC_BESTCOMM + help + This option enables the support for the ATA task. + +config PPC_BESTCOMM_FEC + tristate + depends on PPC_BESTCOMM + help + This option enables the support for the FEC tasks. + +config PPC_BESTCOMM_GEN_BD + tristate + depends on PPC_BESTCOMM + help + This option enables the support for the GenBD tasks. + diff --git a/drivers/dma/bestcomm/Makefile b/drivers/dma/bestcomm/Makefile new file mode 100644 index 00000000000..aed2df2a658 --- /dev/null +++ b/drivers/dma/bestcomm/Makefile @@ -0,0 +1,14 @@ +# +# Makefile for BestComm & co +# + +bestcomm-core-objs := bestcomm.o sram.o +bestcomm-ata-objs := ata.o bcom_ata_task.o +bestcomm-fec-objs := fec.o bcom_fec_rx_task.o bcom_fec_tx_task.o +bestcomm-gen-bd-objs := gen_bd.o bcom_gen_bd_rx_task.o bcom_gen_bd_tx_task.o + +obj-$(CONFIG_PPC_BESTCOMM) += bestcomm-core.o +obj-$(CONFIG_PPC_BESTCOMM_ATA) += bestcomm-ata.o +obj-$(CONFIG_PPC_BESTCOMM_FEC) += bestcomm-fec.o +obj-$(CONFIG_PPC_BESTCOMM_GEN_BD) += bestcomm-gen-bd.o + diff --git a/drivers/dma/bestcomm/ata.c b/drivers/dma/bestcomm/ata.c new file mode 100644 index 00000000000..2fd87f83cf9 --- /dev/null +++ b/drivers/dma/bestcomm/ata.c @@ -0,0 +1,157 @@ +/* + * Bestcomm ATA task driver + * + * + * Patterned after bestcomm/fec.c by Dale Farnsworth + * 2003-2004 (c) MontaVista, Software, Inc. + * + * Copyright (C) 2006-2007 Sylvain Munaut + * Copyright (C) 2006 Freescale - John Rigby + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +#include +#include +#include +#include + +#include +#include +#include + + +/* ======================================================================== */ +/* Task image/var/inc */ +/* ======================================================================== */ + +/* ata task image */ +extern u32 bcom_ata_task[]; + +/* ata task vars that need to be set before enabling the task */ +struct bcom_ata_var { + u32 enable; /* (u16*) address of task's control register */ + u32 bd_base; /* (struct bcom_bd*) beginning of ring buffer */ + u32 bd_last; /* (struct bcom_bd*) end of ring buffer */ + u32 bd_start; /* (struct bcom_bd*) current bd */ + u32 buffer_size; /* size of receive buffer */ +}; + +/* ata task incs that need to be set before enabling the task */ +struct bcom_ata_inc { + u16 pad0; + s16 incr_bytes; + u16 pad1; + s16 incr_dst; + u16 pad2; + s16 incr_src; +}; + + +/* ======================================================================== */ +/* Task support code */ +/* ======================================================================== */ + +struct bcom_task * +bcom_ata_init(int queue_len, int maxbufsize) +{ + struct bcom_task *tsk; + struct bcom_ata_var *var; + struct bcom_ata_inc *inc; + + /* Prefetch breaks ATA DMA. Turn it off for ATA DMA */ + bcom_disable_prefetch(); + + tsk = bcom_task_alloc(queue_len, sizeof(struct bcom_ata_bd), 0); + if (!tsk) + return NULL; + + tsk->flags = BCOM_FLAGS_NONE; + + bcom_ata_reset_bd(tsk); + + var = (struct bcom_ata_var *) bcom_task_var(tsk->tasknum); + inc = (struct bcom_ata_inc *) bcom_task_inc(tsk->tasknum); + + if (bcom_load_image(tsk->tasknum, bcom_ata_task)) { + bcom_task_free(tsk); + return NULL; + } + + var->enable = bcom_eng->regs_base + + offsetof(struct mpc52xx_sdma, tcr[tsk->tasknum]); + var->bd_base = tsk->bd_pa; + var->bd_last = tsk->bd_pa + ((tsk->num_bd-1) * tsk->bd_size); + var->bd_start = tsk->bd_pa; + var->buffer_size = maxbufsize; + + /* Configure some stuff */ + bcom_set_task_pragma(tsk->tasknum, BCOM_ATA_PRAGMA); + bcom_set_task_auto_start(tsk->tasknum, tsk->tasknum); + + out_8(&bcom_eng->regs->ipr[BCOM_INITIATOR_ATA_RX], BCOM_IPR_ATA_RX); + out_8(&bcom_eng->regs->ipr[BCOM_INITIATOR_ATA_TX], BCOM_IPR_ATA_TX); + + out_be32(&bcom_eng->regs->IntPend, 1<tasknum); /* Clear ints */ + + return tsk; +} +EXPORT_SYMBOL_GPL(bcom_ata_init); + +void bcom_ata_rx_prepare(struct bcom_task *tsk) +{ + struct bcom_ata_inc *inc; + + inc = (struct bcom_ata_inc *) bcom_task_inc(tsk->tasknum); + + inc->incr_bytes = -(s16)sizeof(u32); + inc->incr_src = 0; + inc->incr_dst = sizeof(u32); + + bcom_set_initiator(tsk->tasknum, BCOM_INITIATOR_ATA_RX); +} +EXPORT_SYMBOL_GPL(bcom_ata_rx_prepare); + +void bcom_ata_tx_prepare(struct bcom_task *tsk) +{ + struct bcom_ata_inc *inc; + + inc = (struct bcom_ata_inc *) bcom_task_inc(tsk->tasknum); + + inc->incr_bytes = -(s16)sizeof(u32); + inc->incr_src = sizeof(u32); + inc->incr_dst = 0; + + bcom_set_initiator(tsk->tasknum, BCOM_INITIATOR_ATA_TX); +} +EXPORT_SYMBOL_GPL(bcom_ata_tx_prepare); + +void bcom_ata_reset_bd(struct bcom_task *tsk) +{ + struct bcom_ata_var *var; + + /* Reset all BD */ + memset(tsk->bd, 0x00, tsk->num_bd * tsk->bd_size); + + tsk->index = 0; + tsk->outdex = 0; + + var = (struct bcom_ata_var *) bcom_task_var(tsk->tasknum); + var->bd_start = var->bd_base; +} +EXPORT_SYMBOL_GPL(bcom_ata_reset_bd); + +void bcom_ata_release(struct bcom_task *tsk) +{ + /* Nothing special for the ATA tasks */ + bcom_task_free(tsk); +} +EXPORT_SYMBOL_GPL(bcom_ata_release); + + +MODULE_DESCRIPTION("BestComm ATA task driver"); +MODULE_AUTHOR("John Rigby"); +MODULE_LICENSE("GPL v2"); + diff --git a/drivers/dma/bestcomm/bcom_ata_task.c b/drivers/dma/bestcomm/bcom_ata_task.c new file mode 100644 index 00000000000..cc6049a4e46 --- /dev/null +++ b/drivers/dma/bestcomm/bcom_ata_task.c @@ -0,0 +1,67 @@ +/* + * Bestcomm ATA task microcode + * + * Copyright (c) 2004 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + * Created based on bestcom/code_dma/image_rtos1/dma_image.hex + */ + +#include + +/* + * The header consists of the following fields: + * u32 magic; + * u8 desc_size; + * u8 var_size; + * u8 inc_size; + * u8 first_var; + * u8 reserved[8]; + * + * The size fields contain the number of 32-bit words. + */ + +u32 bcom_ata_task[] = { + /* header */ + 0x4243544b, + 0x0e060709, + 0x00000000, + 0x00000000, + + /* Task descriptors */ + 0x8198009b, /* LCD: idx0 = var3; idx0 <= var2; idx0 += inc3 */ + 0x13e00c08, /* DRD1A: var3 = var1; FN=0 MORE init=31 WS=0 RS=0 */ + 0xb8000264, /* LCD: idx1 = *idx0, idx2 = var0; idx1 < var9; idx1 += inc4, idx2 += inc4 */ + 0x10000f00, /* DRD1A: var3 = idx0; FN=0 MORE init=0 WS=0 RS=0 */ + 0x60140002, /* DRD2A: EU0=0 EU1=0 EU2=0 EU3=2 EXT init=0 WS=2 RS=2 */ + 0x0c8cfc8a, /* DRD2B1: *idx2 = EU3(); EU3(*idx2,var10) */ + 0xd8988240, /* LCDEXT: idx1 = idx1; idx1 > var9; idx1 += inc0 */ + 0xf845e011, /* LCDEXT: idx2 = *(idx0 + var00000015); ; idx2 += inc2 */ + 0xb845e00a, /* LCD: idx3 = *(idx0 + var00000019); ; idx3 += inc1 */ + 0x0bfecf90, /* DRD1A: *idx3 = *idx2; FN=0 TFD init=31 WS=3 RS=3 */ + 0x9898802d, /* LCD: idx1 = idx1; idx1 once var0; idx1 += inc5 */ + 0x64000005, /* DRD2A: EU0=0 EU1=0 EU2=0 EU3=5 INT EXT init=0 WS=0 RS=0 */ + 0x0c0cf849, /* DRD2B1: *idx0 = EU3(); EU3(idx1,var9) */ + 0x000001f8, /* NOP */ + + /* VAR[9]-VAR[14] */ + 0x40000000, + 0x7fff7fff, + 0x00000000, + 0x00000000, + 0x00000000, + 0x00000000, + + /* INC[0]-INC[6] */ + 0x40000000, + 0xe0000000, + 0xe0000000, + 0xa000000c, + 0x20000000, + 0x00000000, + 0x00000000, +}; + diff --git a/drivers/dma/bestcomm/bcom_fec_rx_task.c b/drivers/dma/bestcomm/bcom_fec_rx_task.c new file mode 100644 index 00000000000..a1ad6a02fce --- /dev/null +++ b/drivers/dma/bestcomm/bcom_fec_rx_task.c @@ -0,0 +1,78 @@ +/* + * Bestcomm FEC RX task microcode + * + * Copyright (c) 2004 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + * Automatically created based on BestCommAPI-2.2/code_dma/image_rtos1/dma_image.hex + * on Tue Mar 22 11:19:38 2005 GMT + */ + +#include + +/* + * The header consists of the following fields: + * u32 magic; + * u8 desc_size; + * u8 var_size; + * u8 inc_size; + * u8 first_var; + * u8 reserved[8]; + * + * The size fields contain the number of 32-bit words. + */ + +u32 bcom_fec_rx_task[] = { + /* header */ + 0x4243544b, + 0x18060709, + 0x00000000, + 0x00000000, + + /* Task descriptors */ + 0x808220e3, /* LCD: idx0 = var1, idx1 = var4; idx1 <= var3; idx0 += inc4, idx1 += inc3 */ + 0x10601010, /* DRD1A: var4 = var2; FN=0 MORE init=3 WS=0 RS=0 */ + 0xb8800264, /* LCD: idx2 = *idx1, idx3 = var0; idx2 < var9; idx2 += inc4, idx3 += inc4 */ + 0x10001308, /* DRD1A: var4 = idx1; FN=0 MORE init=0 WS=0 RS=0 */ + 0x60140002, /* DRD2A: EU0=0 EU1=0 EU2=0 EU3=2 EXT init=0 WS=2 RS=2 */ + 0x0cccfcca, /* DRD2B1: *idx3 = EU3(); EU3(*idx3,var10) */ + 0x80004000, /* LCDEXT: idx2 = 0x00000000; ; */ + 0xb8c58029, /* LCD: idx3 = *(idx1 + var00000015); idx3 once var0; idx3 += inc5 */ + 0x60000002, /* DRD2A: EU0=0 EU1=0 EU2=0 EU3=2 EXT init=0 WS=0 RS=0 */ + 0x088cf8cc, /* DRD2B1: idx2 = EU3(); EU3(idx3,var12) */ + 0x991982f2, /* LCD: idx2 = idx2, idx3 = idx3; idx2 > var11; idx2 += inc6, idx3 += inc2 */ + 0x006acf80, /* DRD1A: *idx3 = *idx0; FN=0 init=3 WS=1 RS=1 */ + 0x80004000, /* LCDEXT: idx2 = 0x00000000; ; */ + 0x9999802d, /* LCD: idx3 = idx3; idx3 once var0; idx3 += inc5 */ + 0x70000002, /* DRD2A: EU0=0 EU1=0 EU2=0 EU3=2 EXT MORE init=0 WS=0 RS=0 */ + 0x034cfc4e, /* DRD2B1: var13 = EU3(); EU3(*idx1,var14) */ + 0x00008868, /* DRD1A: idx2 = var13; FN=0 init=0 WS=0 RS=0 */ + 0x99198341, /* LCD: idx2 = idx2, idx3 = idx3; idx2 > var13; idx2 += inc0, idx3 += inc1 */ + 0x007ecf80, /* DRD1A: *idx3 = *idx0; FN=0 init=3 WS=3 RS=3 */ + 0x99198272, /* LCD: idx2 = idx2, idx3 = idx3; idx2 > var9; idx2 += inc6, idx3 += inc2 */ + 0x046acf80, /* DRD1A: *idx3 = *idx0; FN=0 INT init=3 WS=1 RS=1 */ + 0x9819002d, /* LCD: idx2 = idx0; idx2 once var0; idx2 += inc5 */ + 0x0060c790, /* DRD1A: *idx1 = *idx2; FN=0 init=3 WS=0 RS=0 */ + 0x000001f8, /* NOP */ + + /* VAR[9]-VAR[14] */ + 0x40000000, + 0x7fff7fff, + 0x00000000, + 0x00000003, + 0x40000008, + 0x43ffffff, + + /* INC[0]-INC[6] */ + 0x40000000, + 0xe0000000, + 0xe0000000, + 0xa0000008, + 0x20000000, + 0x00000000, + 0x4000ffff, +}; + diff --git a/drivers/dma/bestcomm/bcom_fec_tx_task.c b/drivers/dma/bestcomm/bcom_fec_tx_task.c new file mode 100644 index 00000000000..b1c495c3a65 --- /dev/null +++ b/drivers/dma/bestcomm/bcom_fec_tx_task.c @@ -0,0 +1,91 @@ +/* + * Bestcomm FEC TX task microcode + * + * Copyright (c) 2004 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + * Automatically created based on BestCommAPI-2.2/code_dma/image_rtos1/dma_image.hex + * on Tue Mar 22 11:19:29 2005 GMT + */ + +#include + +/* + * The header consists of the following fields: + * u32 magic; + * u8 desc_size; + * u8 var_size; + * u8 inc_size; + * u8 first_var; + * u8 reserved[8]; + * + * The size fields contain the number of 32-bit words. + */ + +u32 bcom_fec_tx_task[] = { + /* header */ + 0x4243544b, + 0x2407070d, + 0x00000000, + 0x00000000, + + /* Task descriptors */ + 0x8018001b, /* LCD: idx0 = var0; idx0 <= var0; idx0 += inc3 */ + 0x60000005, /* DRD2A: EU0=0 EU1=0 EU2=0 EU3=5 EXT init=0 WS=0 RS=0 */ + 0x01ccfc0d, /* DRD2B1: var7 = EU3(); EU3(*idx0,var13) */ + 0x8082a123, /* LCD: idx0 = var1, idx1 = var5; idx1 <= var4; idx0 += inc4, idx1 += inc3 */ + 0x10801418, /* DRD1A: var5 = var3; FN=0 MORE init=4 WS=0 RS=0 */ + 0xf88103a4, /* LCDEXT: idx2 = *idx1, idx3 = var2; idx2 < var14; idx2 += inc4, idx3 += inc4 */ + 0x801a6024, /* LCD: idx4 = var0; ; idx4 += inc4 */ + 0x10001708, /* DRD1A: var5 = idx1; FN=0 MORE init=0 WS=0 RS=0 */ + 0x60140002, /* DRD2A: EU0=0 EU1=0 EU2=0 EU3=2 EXT init=0 WS=2 RS=2 */ + 0x0cccfccf, /* DRD2B1: *idx3 = EU3(); EU3(*idx3,var15) */ + 0x991a002c, /* LCD: idx2 = idx2, idx3 = idx4; idx2 once var0; idx2 += inc5, idx3 += inc4 */ + 0x70000002, /* DRD2A: EU0=0 EU1=0 EU2=0 EU3=2 EXT MORE init=0 WS=0 RS=0 */ + 0x024cfc4d, /* DRD2B1: var9 = EU3(); EU3(*idx1,var13) */ + 0x60000003, /* DRD2A: EU0=0 EU1=0 EU2=0 EU3=3 EXT init=0 WS=0 RS=0 */ + 0x0cccf247, /* DRD2B1: *idx3 = EU3(); EU3(var9,var7) */ + 0x80004000, /* LCDEXT: idx2 = 0x00000000; ; */ + 0xb8c80029, /* LCD: idx3 = *(idx1 + var0000001a); idx3 once var0; idx3 += inc5 */ + 0x70000002, /* DRD2A: EU0=0 EU1=0 EU2=0 EU3=2 EXT MORE init=0 WS=0 RS=0 */ + 0x088cf8d1, /* DRD2B1: idx2 = EU3(); EU3(idx3,var17) */ + 0x00002f10, /* DRD1A: var11 = idx2; FN=0 init=0 WS=0 RS=0 */ + 0x99198432, /* LCD: idx2 = idx2, idx3 = idx3; idx2 > var16; idx2 += inc6, idx3 += inc2 */ + 0x008ac398, /* DRD1A: *idx0 = *idx3; FN=0 init=4 WS=1 RS=1 */ + 0x80004000, /* LCDEXT: idx2 = 0x00000000; ; */ + 0x9999802d, /* LCD: idx3 = idx3; idx3 once var0; idx3 += inc5 */ + 0x70000002, /* DRD2A: EU0=0 EU1=0 EU2=0 EU3=2 EXT MORE init=0 WS=0 RS=0 */ + 0x048cfc53, /* DRD2B1: var18 = EU3(); EU3(*idx1,var19) */ + 0x60000008, /* DRD2A: EU0=0 EU1=0 EU2=0 EU3=8 EXT init=0 WS=0 RS=0 */ + 0x088cf48b, /* DRD2B1: idx2 = EU3(); EU3(var18,var11) */ + 0x99198481, /* LCD: idx2 = idx2, idx3 = idx3; idx2 > var18; idx2 += inc0, idx3 += inc1 */ + 0x009ec398, /* DRD1A: *idx0 = *idx3; FN=0 init=4 WS=3 RS=3 */ + 0x991983b2, /* LCD: idx2 = idx2, idx3 = idx3; idx2 > var14; idx2 += inc6, idx3 += inc2 */ + 0x088ac398, /* DRD1A: *idx0 = *idx3; FN=0 TFD init=4 WS=1 RS=1 */ + 0x9919002d, /* LCD: idx2 = idx2; idx2 once var0; idx2 += inc5 */ + 0x60000005, /* DRD2A: EU0=0 EU1=0 EU2=0 EU3=5 EXT init=0 WS=0 RS=0 */ + 0x0c4cf88e, /* DRD2B1: *idx1 = EU3(); EU3(idx2,var14) */ + 0x000001f8, /* NOP */ + + /* VAR[13]-VAR[19] */ + 0x0c000000, + 0x40000000, + 0x7fff7fff, + 0x00000000, + 0x00000003, + 0x40000004, + 0x43ffffff, + + /* INC[0]-INC[6] */ + 0x40000000, + 0xe0000000, + 0xe0000000, + 0xa0000008, + 0x20000000, + 0x00000000, + 0x4000ffff, +}; + diff --git a/drivers/dma/bestcomm/bcom_gen_bd_rx_task.c b/drivers/dma/bestcomm/bcom_gen_bd_rx_task.c new file mode 100644 index 00000000000..efee022b025 --- /dev/null +++ b/drivers/dma/bestcomm/bcom_gen_bd_rx_task.c @@ -0,0 +1,63 @@ +/* + * Bestcomm GenBD RX task microcode + * + * Copyright (C) 2006 AppSpec Computer Technologies Corp. + * Jeff Gibbons + * Copyright (c) 2004 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + * Based on BestCommAPI-2.2/code_dma/image_rtos1/dma_image.hex + * on Tue Mar 4 10:14:12 2006 GMT + * + */ + +#include + +/* + * The header consists of the following fields: + * u32 magic; + * u8 desc_size; + * u8 var_size; + * u8 inc_size; + * u8 first_var; + * u8 reserved[8]; + * + * The size fields contain the number of 32-bit words. + */ + +u32 bcom_gen_bd_rx_task[] = { + /* header */ + 0x4243544b, + 0x0d020409, + 0x00000000, + 0x00000000, + + /* Task descriptors */ + 0x808220da, /* LCD: idx0 = var1, idx1 = var4; idx1 <= var3; idx0 += inc3, idx1 += inc2 */ + 0x13e01010, /* DRD1A: var4 = var2; FN=0 MORE init=31 WS=0 RS=0 */ + 0xb880025b, /* LCD: idx2 = *idx1, idx3 = var0; idx2 < var9; idx2 += inc3, idx3 += inc3 */ + 0x10001308, /* DRD1A: var4 = idx1; FN=0 MORE init=0 WS=0 RS=0 */ + 0x60140002, /* DRD2A: EU0=0 EU1=0 EU2=0 EU3=2 EXT init=0 WS=2 RS=2 */ + 0x0cccfcca, /* DRD2B1: *idx3 = EU3(); EU3(*idx3,var10) */ + 0xd9190240, /* LCDEXT: idx2 = idx2; idx2 > var9; idx2 += inc0 */ + 0xb8c5e009, /* LCD: idx3 = *(idx1 + var00000015); ; idx3 += inc1 */ + 0x07fecf80, /* DRD1A: *idx3 = *idx0; FN=0 INT init=31 WS=3 RS=3 */ + 0x99190024, /* LCD: idx2 = idx2; idx2 once var0; idx2 += inc4 */ + 0x60000005, /* DRD2A: EU0=0 EU1=0 EU2=0 EU3=5 EXT init=0 WS=0 RS=0 */ + 0x0c4cf889, /* DRD2B1: *idx1 = EU3(); EU3(idx2,var9) */ + 0x000001f8, /* NOP */ + + /* VAR[9]-VAR[10] */ + 0x40000000, + 0x7fff7fff, + + /* INC[0]-INC[3] */ + 0x40000000, + 0xe0000000, + 0xa0000008, + 0x20000000, +}; + diff --git a/drivers/dma/bestcomm/bcom_gen_bd_tx_task.c b/drivers/dma/bestcomm/bcom_gen_bd_tx_task.c new file mode 100644 index 00000000000..c605aa42ecb --- /dev/null +++ b/drivers/dma/bestcomm/bcom_gen_bd_tx_task.c @@ -0,0 +1,69 @@ +/* + * Bestcomm GenBD TX task microcode + * + * Copyright (C) 2006 AppSpec Computer Technologies Corp. + * Jeff Gibbons + * Copyright (c) 2004 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + * Based on BestCommAPI-2.2/code_dma/image_rtos1/dma_image.hex + * on Tue Mar 4 10:14:12 2006 GMT + * + */ + +#include + +/* + * The header consists of the following fields: + * u32 magic; + * u8 desc_size; + * u8 var_size; + * u8 inc_size; + * u8 first_var; + * u8 reserved[8]; + * + * The size fields contain the number of 32-bit words. + */ + +u32 bcom_gen_bd_tx_task[] = { + /* header */ + 0x4243544b, + 0x0f040609, + 0x00000000, + 0x00000000, + + /* Task descriptors */ + 0x800220e3, /* LCD: idx0 = var0, idx1 = var4; idx1 <= var3; idx0 += inc4, idx1 += inc3 */ + 0x13e01010, /* DRD1A: var4 = var2; FN=0 MORE init=31 WS=0 RS=0 */ + 0xb8808264, /* LCD: idx2 = *idx1, idx3 = var1; idx2 < var9; idx2 += inc4, idx3 += inc4 */ + 0x10001308, /* DRD1A: var4 = idx1; FN=0 MORE init=0 WS=0 RS=0 */ + 0x60140002, /* DRD2A: EU0=0 EU1=0 EU2=0 EU3=2 EXT init=0 WS=2 RS=2 */ + 0x0cccfcca, /* DRD2B1: *idx3 = EU3(); EU3(*idx3,var10) */ + 0xd9190300, /* LCDEXT: idx2 = idx2; idx2 > var12; idx2 += inc0 */ + 0xb8c5e009, /* LCD: idx3 = *(idx1 + var00000015); ; idx3 += inc1 */ + 0x03fec398, /* DRD1A: *idx0 = *idx3; FN=0 init=31 WS=3 RS=3 */ + 0x9919826a, /* LCD: idx2 = idx2, idx3 = idx3; idx2 > var9; idx2 += inc5, idx3 += inc2 */ + 0x0feac398, /* DRD1A: *idx0 = *idx3; FN=0 TFD INT init=31 WS=1 RS=1 */ + 0x99190036, /* LCD: idx2 = idx2; idx2 once var0; idx2 += inc6 */ + 0x60000005, /* DRD2A: EU0=0 EU1=0 EU2=0 EU3=5 EXT init=0 WS=0 RS=0 */ + 0x0c4cf889, /* DRD2B1: *idx1 = EU3(); EU3(idx2,var9) */ + 0x000001f8, /* NOP */ + + /* VAR[9]-VAR[12] */ + 0x40000000, + 0x7fff7fff, + 0x00000000, + 0x40000004, + + /* INC[0]-INC[5] */ + 0x40000000, + 0xe0000000, + 0xe0000000, + 0xa0000008, + 0x20000000, + 0x4000ffff, +}; + diff --git a/drivers/dma/bestcomm/bestcomm.c b/drivers/dma/bestcomm/bestcomm.c new file mode 100644 index 00000000000..67371fb820d --- /dev/null +++ b/drivers/dma/bestcomm/bestcomm.c @@ -0,0 +1,532 @@ +/* + * Driver for MPC52xx processor BestComm peripheral controller + * + * + * Copyright (C) 2006-2007 Sylvain Munaut + * Copyright (C) 2005 Varma Electronics Oy, + * ( by Andrey Volkov ) + * Copyright (C) 2003-2004 MontaVista, Software, Inc. + * ( by Dale Farnsworth ) + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include "linux/fsl/bestcomm/bestcomm.h" + +#define DRIVER_NAME "bestcomm-core" + +/* MPC5200 device tree match tables */ +static struct of_device_id mpc52xx_sram_ids[] __devinitdata = { + { .compatible = "fsl,mpc5200-sram", }, + { .compatible = "mpc5200-sram", }, + {} +}; + + +struct bcom_engine *bcom_eng = NULL; +EXPORT_SYMBOL_GPL(bcom_eng); /* needed for inline functions */ + +/* ======================================================================== */ +/* Public and private API */ +/* ======================================================================== */ + +/* Private API */ + +struct bcom_task * +bcom_task_alloc(int bd_count, int bd_size, int priv_size) +{ + int i, tasknum = -1; + struct bcom_task *tsk; + + /* Don't try to do anything if bestcomm init failed */ + if (!bcom_eng) + return NULL; + + /* Get and reserve a task num */ + spin_lock(&bcom_eng->lock); + + for (i=0; itdt[i].stop) { /* we use stop as a marker */ + bcom_eng->tdt[i].stop = 0xfffffffful; /* dummy addr */ + tasknum = i; + break; + } + + spin_unlock(&bcom_eng->lock); + + if (tasknum < 0) + return NULL; + + /* Allocate our structure */ + tsk = kzalloc(sizeof(struct bcom_task) + priv_size, GFP_KERNEL); + if (!tsk) + goto error; + + tsk->tasknum = tasknum; + if (priv_size) + tsk->priv = (void*)tsk + sizeof(struct bcom_task); + + /* Get IRQ of that task */ + tsk->irq = irq_of_parse_and_map(bcom_eng->ofnode, tsk->tasknum); + if (tsk->irq == NO_IRQ) + goto error; + + /* Init the BDs, if needed */ + if (bd_count) { + tsk->cookie = kmalloc(sizeof(void*) * bd_count, GFP_KERNEL); + if (!tsk->cookie) + goto error; + + tsk->bd = bcom_sram_alloc(bd_count * bd_size, 4, &tsk->bd_pa); + if (!tsk->bd) + goto error; + memset(tsk->bd, 0x00, bd_count * bd_size); + + tsk->num_bd = bd_count; + tsk->bd_size = bd_size; + } + + return tsk; + +error: + if (tsk) { + if (tsk->irq != NO_IRQ) + irq_dispose_mapping(tsk->irq); + bcom_sram_free(tsk->bd); + kfree(tsk->cookie); + kfree(tsk); + } + + bcom_eng->tdt[tasknum].stop = 0; + + return NULL; +} +EXPORT_SYMBOL_GPL(bcom_task_alloc); + +void +bcom_task_free(struct bcom_task *tsk) +{ + /* Stop the task */ + bcom_disable_task(tsk->tasknum); + + /* Clear TDT */ + bcom_eng->tdt[tsk->tasknum].start = 0; + bcom_eng->tdt[tsk->tasknum].stop = 0; + + /* Free everything */ + irq_dispose_mapping(tsk->irq); + bcom_sram_free(tsk->bd); + kfree(tsk->cookie); + kfree(tsk); +} +EXPORT_SYMBOL_GPL(bcom_task_free); + +int +bcom_load_image(int task, u32 *task_image) +{ + struct bcom_task_header *hdr = (struct bcom_task_header *)task_image; + struct bcom_tdt *tdt; + u32 *desc, *var, *inc; + u32 *desc_src, *var_src, *inc_src; + + /* Safety checks */ + if (hdr->magic != BCOM_TASK_MAGIC) { + printk(KERN_ERR DRIVER_NAME + ": Trying to load invalid microcode\n"); + return -EINVAL; + } + + if ((task < 0) || (task >= BCOM_MAX_TASKS)) { + printk(KERN_ERR DRIVER_NAME + ": Trying to load invalid task %d\n", task); + return -EINVAL; + } + + /* Initial load or reload */ + tdt = &bcom_eng->tdt[task]; + + if (tdt->start) { + desc = bcom_task_desc(task); + if (hdr->desc_size != bcom_task_num_descs(task)) { + printk(KERN_ERR DRIVER_NAME + ": Trying to reload wrong task image " + "(%d size %d/%d)!\n", + task, + hdr->desc_size, + bcom_task_num_descs(task)); + return -EINVAL; + } + } else { + phys_addr_t start_pa; + + desc = bcom_sram_alloc(hdr->desc_size * sizeof(u32), 4, &start_pa); + if (!desc) + return -ENOMEM; + + tdt->start = start_pa; + tdt->stop = start_pa + ((hdr->desc_size-1) * sizeof(u32)); + } + + var = bcom_task_var(task); + inc = bcom_task_inc(task); + + /* Clear & copy */ + memset(var, 0x00, BCOM_VAR_SIZE); + memset(inc, 0x00, BCOM_INC_SIZE); + + desc_src = (u32 *)(hdr + 1); + var_src = desc_src + hdr->desc_size; + inc_src = var_src + hdr->var_size; + + memcpy(desc, desc_src, hdr->desc_size * sizeof(u32)); + memcpy(var + hdr->first_var, var_src, hdr->var_size * sizeof(u32)); + memcpy(inc, inc_src, hdr->inc_size * sizeof(u32)); + + return 0; +} +EXPORT_SYMBOL_GPL(bcom_load_image); + +void +bcom_set_initiator(int task, int initiator) +{ + int i; + int num_descs; + u32 *desc; + int next_drd_has_initiator; + + bcom_set_tcr_initiator(task, initiator); + + /* Just setting tcr is apparently not enough due to some problem */ + /* with it. So we just go thru all the microcode and replace in */ + /* the DRD directly */ + + desc = bcom_task_desc(task); + next_drd_has_initiator = 1; + num_descs = bcom_task_num_descs(task); + + for (i=0; itasknum); +} +EXPORT_SYMBOL_GPL(bcom_enable); + +void +bcom_disable(struct bcom_task *tsk) +{ + bcom_disable_task(tsk->tasknum); +} +EXPORT_SYMBOL_GPL(bcom_disable); + + +/* ======================================================================== */ +/* Engine init/cleanup */ +/* ======================================================================== */ + +/* Function Descriptor table */ +/* this will need to be updated if Freescale changes their task code FDT */ +static u32 fdt_ops[] = { + 0xa0045670, /* FDT[48] - load_acc() */ + 0x80045670, /* FDT[49] - unload_acc() */ + 0x21800000, /* FDT[50] - and() */ + 0x21e00000, /* FDT[51] - or() */ + 0x21500000, /* FDT[52] - xor() */ + 0x21400000, /* FDT[53] - andn() */ + 0x21500000, /* FDT[54] - not() */ + 0x20400000, /* FDT[55] - add() */ + 0x20500000, /* FDT[56] - sub() */ + 0x20800000, /* FDT[57] - lsh() */ + 0x20a00000, /* FDT[58] - rsh() */ + 0xc0170000, /* FDT[59] - crc8() */ + 0xc0145670, /* FDT[60] - crc16() */ + 0xc0345670, /* FDT[61] - crc32() */ + 0xa0076540, /* FDT[62] - endian32() */ + 0xa0000760, /* FDT[63] - endian16() */ +}; + + +static int __devinit +bcom_engine_init(void) +{ + int task; + phys_addr_t tdt_pa, ctx_pa, var_pa, fdt_pa; + unsigned int tdt_size, ctx_size, var_size, fdt_size; + + /* Allocate & clear SRAM zones for FDT, TDTs, contexts and vars/incs */ + tdt_size = BCOM_MAX_TASKS * sizeof(struct bcom_tdt); + ctx_size = BCOM_MAX_TASKS * BCOM_CTX_SIZE; + var_size = BCOM_MAX_TASKS * (BCOM_VAR_SIZE + BCOM_INC_SIZE); + fdt_size = BCOM_FDT_SIZE; + + bcom_eng->tdt = bcom_sram_alloc(tdt_size, sizeof(u32), &tdt_pa); + bcom_eng->ctx = bcom_sram_alloc(ctx_size, BCOM_CTX_ALIGN, &ctx_pa); + bcom_eng->var = bcom_sram_alloc(var_size, BCOM_VAR_ALIGN, &var_pa); + bcom_eng->fdt = bcom_sram_alloc(fdt_size, BCOM_FDT_ALIGN, &fdt_pa); + + if (!bcom_eng->tdt || !bcom_eng->ctx || !bcom_eng->var || !bcom_eng->fdt) { + printk(KERN_ERR "DMA: SRAM alloc failed in engine init !\n"); + + bcom_sram_free(bcom_eng->tdt); + bcom_sram_free(bcom_eng->ctx); + bcom_sram_free(bcom_eng->var); + bcom_sram_free(bcom_eng->fdt); + + return -ENOMEM; + } + + memset(bcom_eng->tdt, 0x00, tdt_size); + memset(bcom_eng->ctx, 0x00, ctx_size); + memset(bcom_eng->var, 0x00, var_size); + memset(bcom_eng->fdt, 0x00, fdt_size); + + /* Copy the FDT for the EU#3 */ + memcpy(&bcom_eng->fdt[48], fdt_ops, sizeof(fdt_ops)); + + /* Initialize Task base structure */ + for (task=0; taskregs->tcr[task], 0); + out_8(&bcom_eng->regs->ipr[task], 0); + + bcom_eng->tdt[task].context = ctx_pa; + bcom_eng->tdt[task].var = var_pa; + bcom_eng->tdt[task].fdt = fdt_pa; + + var_pa += BCOM_VAR_SIZE + BCOM_INC_SIZE; + ctx_pa += BCOM_CTX_SIZE; + } + + out_be32(&bcom_eng->regs->taskBar, tdt_pa); + + /* Init 'always' initiator */ + out_8(&bcom_eng->regs->ipr[BCOM_INITIATOR_ALWAYS], BCOM_IPR_ALWAYS); + + /* Disable COMM Bus Prefetch on the original 5200; it's broken */ + if ((mfspr(SPRN_SVR) & MPC5200_SVR_MASK) == MPC5200_SVR) + bcom_disable_prefetch(); + + /* Init lock */ + spin_lock_init(&bcom_eng->lock); + + return 0; +} + +static void +bcom_engine_cleanup(void) +{ + int task; + + /* Stop all tasks */ + for (task=0; taskregs->tcr[task], 0); + out_8(&bcom_eng->regs->ipr[task], 0); + } + + out_be32(&bcom_eng->regs->taskBar, 0ul); + + /* Release the SRAM zones */ + bcom_sram_free(bcom_eng->tdt); + bcom_sram_free(bcom_eng->ctx); + bcom_sram_free(bcom_eng->var); + bcom_sram_free(bcom_eng->fdt); +} + + +/* ======================================================================== */ +/* OF platform driver */ +/* ======================================================================== */ + +static int __devinit mpc52xx_bcom_probe(struct platform_device *op) +{ + struct device_node *ofn_sram; + struct resource res_bcom; + + int rv; + + /* Inform user we're ok so far */ + printk(KERN_INFO "DMA: MPC52xx BestComm driver\n"); + + /* Get the bestcomm node */ + of_node_get(op->dev.of_node); + + /* Prepare SRAM */ + ofn_sram = of_find_matching_node(NULL, mpc52xx_sram_ids); + if (!ofn_sram) { + printk(KERN_ERR DRIVER_NAME ": " + "No SRAM found in device tree\n"); + rv = -ENODEV; + goto error_ofput; + } + rv = bcom_sram_init(ofn_sram, DRIVER_NAME); + of_node_put(ofn_sram); + + if (rv) { + printk(KERN_ERR DRIVER_NAME ": " + "Error in SRAM init\n"); + goto error_ofput; + } + + /* Get a clean struct */ + bcom_eng = kzalloc(sizeof(struct bcom_engine), GFP_KERNEL); + if (!bcom_eng) { + printk(KERN_ERR DRIVER_NAME ": " + "Can't allocate state structure\n"); + rv = -ENOMEM; + goto error_sramclean; + } + + /* Save the node */ + bcom_eng->ofnode = op->dev.of_node; + + /* Get, reserve & map io */ + if (of_address_to_resource(op->dev.of_node, 0, &res_bcom)) { + printk(KERN_ERR DRIVER_NAME ": " + "Can't get resource\n"); + rv = -EINVAL; + goto error_sramclean; + } + + if (!request_mem_region(res_bcom.start, sizeof(struct mpc52xx_sdma), + DRIVER_NAME)) { + printk(KERN_ERR DRIVER_NAME ": " + "Can't request registers region\n"); + rv = -EBUSY; + goto error_sramclean; + } + + bcom_eng->regs_base = res_bcom.start; + bcom_eng->regs = ioremap(res_bcom.start, sizeof(struct mpc52xx_sdma)); + if (!bcom_eng->regs) { + printk(KERN_ERR DRIVER_NAME ": " + "Can't map registers\n"); + rv = -ENOMEM; + goto error_release; + } + + /* Now, do the real init */ + rv = bcom_engine_init(); + if (rv) + goto error_unmap; + + /* Done ! */ + printk(KERN_INFO "DMA: MPC52xx BestComm engine @%08lx ok !\n", + (long)bcom_eng->regs_base); + + return 0; + + /* Error path */ +error_unmap: + iounmap(bcom_eng->regs); +error_release: + release_mem_region(res_bcom.start, sizeof(struct mpc52xx_sdma)); +error_sramclean: + kfree(bcom_eng); + bcom_sram_cleanup(); +error_ofput: + of_node_put(op->dev.of_node); + + printk(KERN_ERR "DMA: MPC52xx BestComm init failed !\n"); + + return rv; +} + + +static int mpc52xx_bcom_remove(struct platform_device *op) +{ + /* Clean up the engine */ + bcom_engine_cleanup(); + + /* Cleanup SRAM */ + bcom_sram_cleanup(); + + /* Release regs */ + iounmap(bcom_eng->regs); + release_mem_region(bcom_eng->regs_base, sizeof(struct mpc52xx_sdma)); + + /* Release the node */ + of_node_put(bcom_eng->ofnode); + + /* Release memory */ + kfree(bcom_eng); + bcom_eng = NULL; + + return 0; +} + +static struct of_device_id mpc52xx_bcom_of_match[] = { + { .compatible = "fsl,mpc5200-bestcomm", }, + { .compatible = "mpc5200-bestcomm", }, + {}, +}; + +MODULE_DEVICE_TABLE(of, mpc52xx_bcom_of_match); + + +static struct platform_driver mpc52xx_bcom_of_platform_driver = { + .probe = mpc52xx_bcom_probe, + .remove = mpc52xx_bcom_remove, + .driver = { + .name = DRIVER_NAME, + .owner = THIS_MODULE, + .of_match_table = mpc52xx_bcom_of_match, + }, +}; + + +/* ======================================================================== */ +/* Module */ +/* ======================================================================== */ + +static int __init +mpc52xx_bcom_init(void) +{ + return platform_driver_register(&mpc52xx_bcom_of_platform_driver); +} + +static void __exit +mpc52xx_bcom_exit(void) +{ + platform_driver_unregister(&mpc52xx_bcom_of_platform_driver); +} + +/* If we're not a module, we must make sure everything is setup before */ +/* anyone tries to use us ... that's why we use subsys_initcall instead */ +/* of module_init. */ +subsys_initcall(mpc52xx_bcom_init); +module_exit(mpc52xx_bcom_exit); + +MODULE_DESCRIPTION("Freescale MPC52xx BestComm DMA"); +MODULE_AUTHOR("Sylvain Munaut "); +MODULE_AUTHOR("Andrey Volkov "); +MODULE_AUTHOR("Dale Farnsworth "); +MODULE_LICENSE("GPL v2"); + diff --git a/drivers/dma/bestcomm/fec.c b/drivers/dma/bestcomm/fec.c new file mode 100644 index 00000000000..7f1fb1c999e --- /dev/null +++ b/drivers/dma/bestcomm/fec.c @@ -0,0 +1,270 @@ +/* + * Bestcomm FEC tasks driver + * + * + * Copyright (C) 2006-2007 Sylvain Munaut + * Copyright (C) 2003-2004 MontaVista, Software, Inc. + * ( by Dale Farnsworth ) + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +#include +#include +#include +#include + +#include +#include +#include + + +/* ======================================================================== */ +/* Task image/var/inc */ +/* ======================================================================== */ + +/* fec tasks images */ +extern u32 bcom_fec_rx_task[]; +extern u32 bcom_fec_tx_task[]; + +/* rx task vars that need to be set before enabling the task */ +struct bcom_fec_rx_var { + u32 enable; /* (u16*) address of task's control register */ + u32 fifo; /* (u32*) address of fec's fifo */ + u32 bd_base; /* (struct bcom_bd*) beginning of ring buffer */ + u32 bd_last; /* (struct bcom_bd*) end of ring buffer */ + u32 bd_start; /* (struct bcom_bd*) current bd */ + u32 buffer_size; /* size of receive buffer */ +}; + +/* rx task incs that need to be set before enabling the task */ +struct bcom_fec_rx_inc { + u16 pad0; + s16 incr_bytes; + u16 pad1; + s16 incr_dst; + u16 pad2; + s16 incr_dst_ma; +}; + +/* tx task vars that need to be set before enabling the task */ +struct bcom_fec_tx_var { + u32 DRD; /* (u32*) address of self-modified DRD */ + u32 fifo; /* (u32*) address of fec's fifo */ + u32 enable; /* (u16*) address of task's control register */ + u32 bd_base; /* (struct bcom_bd*) beginning of ring buffer */ + u32 bd_last; /* (struct bcom_bd*) end of ring buffer */ + u32 bd_start; /* (struct bcom_bd*) current bd */ + u32 buffer_size; /* set by uCode for each packet */ +}; + +/* tx task incs that need to be set before enabling the task */ +struct bcom_fec_tx_inc { + u16 pad0; + s16 incr_bytes; + u16 pad1; + s16 incr_src; + u16 pad2; + s16 incr_src_ma; +}; + +/* private structure in the task */ +struct bcom_fec_priv { + phys_addr_t fifo; + int maxbufsize; +}; + + +/* ======================================================================== */ +/* Task support code */ +/* ======================================================================== */ + +struct bcom_task * +bcom_fec_rx_init(int queue_len, phys_addr_t fifo, int maxbufsize) +{ + struct bcom_task *tsk; + struct bcom_fec_priv *priv; + + tsk = bcom_task_alloc(queue_len, sizeof(struct bcom_fec_bd), + sizeof(struct bcom_fec_priv)); + if (!tsk) + return NULL; + + tsk->flags = BCOM_FLAGS_NONE; + + priv = tsk->priv; + priv->fifo = fifo; + priv->maxbufsize = maxbufsize; + + if (bcom_fec_rx_reset(tsk)) { + bcom_task_free(tsk); + return NULL; + } + + return tsk; +} +EXPORT_SYMBOL_GPL(bcom_fec_rx_init); + +int +bcom_fec_rx_reset(struct bcom_task *tsk) +{ + struct bcom_fec_priv *priv = tsk->priv; + struct bcom_fec_rx_var *var; + struct bcom_fec_rx_inc *inc; + + /* Shutdown the task */ + bcom_disable_task(tsk->tasknum); + + /* Reset the microcode */ + var = (struct bcom_fec_rx_var *) bcom_task_var(tsk->tasknum); + inc = (struct bcom_fec_rx_inc *) bcom_task_inc(tsk->tasknum); + + if (bcom_load_image(tsk->tasknum, bcom_fec_rx_task)) + return -1; + + var->enable = bcom_eng->regs_base + + offsetof(struct mpc52xx_sdma, tcr[tsk->tasknum]); + var->fifo = (u32) priv->fifo; + var->bd_base = tsk->bd_pa; + var->bd_last = tsk->bd_pa + ((tsk->num_bd-1) * tsk->bd_size); + var->bd_start = tsk->bd_pa; + var->buffer_size = priv->maxbufsize; + + inc->incr_bytes = -(s16)sizeof(u32); /* These should be in the */ + inc->incr_dst = sizeof(u32); /* task image, but we stick */ + inc->incr_dst_ma= sizeof(u8); /* to the official ones */ + + /* Reset the BDs */ + tsk->index = 0; + tsk->outdex = 0; + + memset(tsk->bd, 0x00, tsk->num_bd * tsk->bd_size); + + /* Configure some stuff */ + bcom_set_task_pragma(tsk->tasknum, BCOM_FEC_RX_BD_PRAGMA); + bcom_set_task_auto_start(tsk->tasknum, tsk->tasknum); + + out_8(&bcom_eng->regs->ipr[BCOM_INITIATOR_FEC_RX], BCOM_IPR_FEC_RX); + + out_be32(&bcom_eng->regs->IntPend, 1<tasknum); /* Clear ints */ + + return 0; +} +EXPORT_SYMBOL_GPL(bcom_fec_rx_reset); + +void +bcom_fec_rx_release(struct bcom_task *tsk) +{ + /* Nothing special for the FEC tasks */ + bcom_task_free(tsk); +} +EXPORT_SYMBOL_GPL(bcom_fec_rx_release); + + + + /* Return 2nd to last DRD */ + /* This is an ugly hack, but at least it's only done + once at initialization */ +static u32 *self_modified_drd(int tasknum) +{ + u32 *desc; + int num_descs; + int drd_count; + int i; + + num_descs = bcom_task_num_descs(tasknum); + desc = bcom_task_desc(tasknum) + num_descs - 1; + drd_count = 0; + for (i=0; iflags = BCOM_FLAGS_ENABLE_TASK; + + priv = tsk->priv; + priv->fifo = fifo; + + if (bcom_fec_tx_reset(tsk)) { + bcom_task_free(tsk); + return NULL; + } + + return tsk; +} +EXPORT_SYMBOL_GPL(bcom_fec_tx_init); + +int +bcom_fec_tx_reset(struct bcom_task *tsk) +{ + struct bcom_fec_priv *priv = tsk->priv; + struct bcom_fec_tx_var *var; + struct bcom_fec_tx_inc *inc; + + /* Shutdown the task */ + bcom_disable_task(tsk->tasknum); + + /* Reset the microcode */ + var = (struct bcom_fec_tx_var *) bcom_task_var(tsk->tasknum); + inc = (struct bcom_fec_tx_inc *) bcom_task_inc(tsk->tasknum); + + if (bcom_load_image(tsk->tasknum, bcom_fec_tx_task)) + return -1; + + var->enable = bcom_eng->regs_base + + offsetof(struct mpc52xx_sdma, tcr[tsk->tasknum]); + var->fifo = (u32) priv->fifo; + var->DRD = bcom_sram_va2pa(self_modified_drd(tsk->tasknum)); + var->bd_base = tsk->bd_pa; + var->bd_last = tsk->bd_pa + ((tsk->num_bd-1) * tsk->bd_size); + var->bd_start = tsk->bd_pa; + + inc->incr_bytes = -(s16)sizeof(u32); /* These should be in the */ + inc->incr_src = sizeof(u32); /* task image, but we stick */ + inc->incr_src_ma= sizeof(u8); /* to the official ones */ + + /* Reset the BDs */ + tsk->index = 0; + tsk->outdex = 0; + + memset(tsk->bd, 0x00, tsk->num_bd * tsk->bd_size); + + /* Configure some stuff */ + bcom_set_task_pragma(tsk->tasknum, BCOM_FEC_TX_BD_PRAGMA); + bcom_set_task_auto_start(tsk->tasknum, tsk->tasknum); + + out_8(&bcom_eng->regs->ipr[BCOM_INITIATOR_FEC_TX], BCOM_IPR_FEC_TX); + + out_be32(&bcom_eng->regs->IntPend, 1<tasknum); /* Clear ints */ + + return 0; +} +EXPORT_SYMBOL_GPL(bcom_fec_tx_reset); + +void +bcom_fec_tx_release(struct bcom_task *tsk) +{ + /* Nothing special for the FEC tasks */ + bcom_task_free(tsk); +} +EXPORT_SYMBOL_GPL(bcom_fec_tx_release); + + +MODULE_DESCRIPTION("BestComm FEC tasks driver"); +MODULE_AUTHOR("Dale Farnsworth "); +MODULE_LICENSE("GPL v2"); + diff --git a/drivers/dma/bestcomm/gen_bd.c b/drivers/dma/bestcomm/gen_bd.c new file mode 100644 index 00000000000..1a5b22d8812 --- /dev/null +++ b/drivers/dma/bestcomm/gen_bd.c @@ -0,0 +1,354 @@ +/* + * Driver for MPC52xx processor BestComm General Buffer Descriptor + * + * Copyright (C) 2007 Sylvain Munaut + * Copyright (C) 2006 AppSpec Computer Technologies Corp. + * Jeff Gibbons + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + */ + +#include +#include +#include +#include +#include +#include + +#include +#include + +#include +#include +#include + + +/* ======================================================================== */ +/* Task image/var/inc */ +/* ======================================================================== */ + +/* gen_bd tasks images */ +extern u32 bcom_gen_bd_rx_task[]; +extern u32 bcom_gen_bd_tx_task[]; + +/* rx task vars that need to be set before enabling the task */ +struct bcom_gen_bd_rx_var { + u32 enable; /* (u16*) address of task's control register */ + u32 fifo; /* (u32*) address of gen_bd's fifo */ + u32 bd_base; /* (struct bcom_bd*) beginning of ring buffer */ + u32 bd_last; /* (struct bcom_bd*) end of ring buffer */ + u32 bd_start; /* (struct bcom_bd*) current bd */ + u32 buffer_size; /* size of receive buffer */ +}; + +/* rx task incs that need to be set before enabling the task */ +struct bcom_gen_bd_rx_inc { + u16 pad0; + s16 incr_bytes; + u16 pad1; + s16 incr_dst; +}; + +/* tx task vars that need to be set before enabling the task */ +struct bcom_gen_bd_tx_var { + u32 fifo; /* (u32*) address of gen_bd's fifo */ + u32 enable; /* (u16*) address of task's control register */ + u32 bd_base; /* (struct bcom_bd*) beginning of ring buffer */ + u32 bd_last; /* (struct bcom_bd*) end of ring buffer */ + u32 bd_start; /* (struct bcom_bd*) current bd */ + u32 buffer_size; /* set by uCode for each packet */ +}; + +/* tx task incs that need to be set before enabling the task */ +struct bcom_gen_bd_tx_inc { + u16 pad0; + s16 incr_bytes; + u16 pad1; + s16 incr_src; + u16 pad2; + s16 incr_src_ma; +}; + +/* private structure */ +struct bcom_gen_bd_priv { + phys_addr_t fifo; + int initiator; + int ipr; + int maxbufsize; +}; + + +/* ======================================================================== */ +/* Task support code */ +/* ======================================================================== */ + +struct bcom_task * +bcom_gen_bd_rx_init(int queue_len, phys_addr_t fifo, + int initiator, int ipr, int maxbufsize) +{ + struct bcom_task *tsk; + struct bcom_gen_bd_priv *priv; + + tsk = bcom_task_alloc(queue_len, sizeof(struct bcom_gen_bd), + sizeof(struct bcom_gen_bd_priv)); + if (!tsk) + return NULL; + + tsk->flags = BCOM_FLAGS_NONE; + + priv = tsk->priv; + priv->fifo = fifo; + priv->initiator = initiator; + priv->ipr = ipr; + priv->maxbufsize = maxbufsize; + + if (bcom_gen_bd_rx_reset(tsk)) { + bcom_task_free(tsk); + return NULL; + } + + return tsk; +} +EXPORT_SYMBOL_GPL(bcom_gen_bd_rx_init); + +int +bcom_gen_bd_rx_reset(struct bcom_task *tsk) +{ + struct bcom_gen_bd_priv *priv = tsk->priv; + struct bcom_gen_bd_rx_var *var; + struct bcom_gen_bd_rx_inc *inc; + + /* Shutdown the task */ + bcom_disable_task(tsk->tasknum); + + /* Reset the microcode */ + var = (struct bcom_gen_bd_rx_var *) bcom_task_var(tsk->tasknum); + inc = (struct bcom_gen_bd_rx_inc *) bcom_task_inc(tsk->tasknum); + + if (bcom_load_image(tsk->tasknum, bcom_gen_bd_rx_task)) + return -1; + + var->enable = bcom_eng->regs_base + + offsetof(struct mpc52xx_sdma, tcr[tsk->tasknum]); + var->fifo = (u32) priv->fifo; + var->bd_base = tsk->bd_pa; + var->bd_last = tsk->bd_pa + ((tsk->num_bd-1) * tsk->bd_size); + var->bd_start = tsk->bd_pa; + var->buffer_size = priv->maxbufsize; + + inc->incr_bytes = -(s16)sizeof(u32); + inc->incr_dst = sizeof(u32); + + /* Reset the BDs */ + tsk->index = 0; + tsk->outdex = 0; + + memset(tsk->bd, 0x00, tsk->num_bd * tsk->bd_size); + + /* Configure some stuff */ + bcom_set_task_pragma(tsk->tasknum, BCOM_GEN_RX_BD_PRAGMA); + bcom_set_task_auto_start(tsk->tasknum, tsk->tasknum); + + out_8(&bcom_eng->regs->ipr[priv->initiator], priv->ipr); + bcom_set_initiator(tsk->tasknum, priv->initiator); + + out_be32(&bcom_eng->regs->IntPend, 1<tasknum); /* Clear ints */ + + return 0; +} +EXPORT_SYMBOL_GPL(bcom_gen_bd_rx_reset); + +void +bcom_gen_bd_rx_release(struct bcom_task *tsk) +{ + /* Nothing special for the GenBD tasks */ + bcom_task_free(tsk); +} +EXPORT_SYMBOL_GPL(bcom_gen_bd_rx_release); + + +extern struct bcom_task * +bcom_gen_bd_tx_init(int queue_len, phys_addr_t fifo, + int initiator, int ipr) +{ + struct bcom_task *tsk; + struct bcom_gen_bd_priv *priv; + + tsk = bcom_task_alloc(queue_len, sizeof(struct bcom_gen_bd), + sizeof(struct bcom_gen_bd_priv)); + if (!tsk) + return NULL; + + tsk->flags = BCOM_FLAGS_NONE; + + priv = tsk->priv; + priv->fifo = fifo; + priv->initiator = initiator; + priv->ipr = ipr; + + if (bcom_gen_bd_tx_reset(tsk)) { + bcom_task_free(tsk); + return NULL; + } + + return tsk; +} +EXPORT_SYMBOL_GPL(bcom_gen_bd_tx_init); + +int +bcom_gen_bd_tx_reset(struct bcom_task *tsk) +{ + struct bcom_gen_bd_priv *priv = tsk->priv; + struct bcom_gen_bd_tx_var *var; + struct bcom_gen_bd_tx_inc *inc; + + /* Shutdown the task */ + bcom_disable_task(tsk->tasknum); + + /* Reset the microcode */ + var = (struct bcom_gen_bd_tx_var *) bcom_task_var(tsk->tasknum); + inc = (struct bcom_gen_bd_tx_inc *) bcom_task_inc(tsk->tasknum); + + if (bcom_load_image(tsk->tasknum, bcom_gen_bd_tx_task)) + return -1; + + var->enable = bcom_eng->regs_base + + offsetof(struct mpc52xx_sdma, tcr[tsk->tasknum]); + var->fifo = (u32) priv->fifo; + var->bd_base = tsk->bd_pa; + var->bd_last = tsk->bd_pa + ((tsk->num_bd-1) * tsk->bd_size); + var->bd_start = tsk->bd_pa; + + inc->incr_bytes = -(s16)sizeof(u32); + inc->incr_src = sizeof(u32); + inc->incr_src_ma = sizeof(u8); + + /* Reset the BDs */ + tsk->index = 0; + tsk->outdex = 0; + + memset(tsk->bd, 0x00, tsk->num_bd * tsk->bd_size); + + /* Configure some stuff */ + bcom_set_task_pragma(tsk->tasknum, BCOM_GEN_TX_BD_PRAGMA); + bcom_set_task_auto_start(tsk->tasknum, tsk->tasknum); + + out_8(&bcom_eng->regs->ipr[priv->initiator], priv->ipr); + bcom_set_initiator(tsk->tasknum, priv->initiator); + + out_be32(&bcom_eng->regs->IntPend, 1<tasknum); /* Clear ints */ + + return 0; +} +EXPORT_SYMBOL_GPL(bcom_gen_bd_tx_reset); + +void +bcom_gen_bd_tx_release(struct bcom_task *tsk) +{ + /* Nothing special for the GenBD tasks */ + bcom_task_free(tsk); +} +EXPORT_SYMBOL_GPL(bcom_gen_bd_tx_release); + +/* --------------------------------------------------------------------- + * PSC support code + */ + +/** + * bcom_psc_parameters - Bestcomm initialization value table for PSC devices + * + * This structure is only used internally. It is a lookup table for PSC + * specific parameters to bestcomm tasks. + */ +static struct bcom_psc_params { + int rx_initiator; + int rx_ipr; + int tx_initiator; + int tx_ipr; +} bcom_psc_params[] = { + [0] = { + .rx_initiator = BCOM_INITIATOR_PSC1_RX, + .rx_ipr = BCOM_IPR_PSC1_RX, + .tx_initiator = BCOM_INITIATOR_PSC1_TX, + .tx_ipr = BCOM_IPR_PSC1_TX, + }, + [1] = { + .rx_initiator = BCOM_INITIATOR_PSC2_RX, + .rx_ipr = BCOM_IPR_PSC2_RX, + .tx_initiator = BCOM_INITIATOR_PSC2_TX, + .tx_ipr = BCOM_IPR_PSC2_TX, + }, + [2] = { + .rx_initiator = BCOM_INITIATOR_PSC3_RX, + .rx_ipr = BCOM_IPR_PSC3_RX, + .tx_initiator = BCOM_INITIATOR_PSC3_TX, + .tx_ipr = BCOM_IPR_PSC3_TX, + }, + [3] = { + .rx_initiator = BCOM_INITIATOR_PSC4_RX, + .rx_ipr = BCOM_IPR_PSC4_RX, + .tx_initiator = BCOM_INITIATOR_PSC4_TX, + .tx_ipr = BCOM_IPR_PSC4_TX, + }, + [4] = { + .rx_initiator = BCOM_INITIATOR_PSC5_RX, + .rx_ipr = BCOM_IPR_PSC5_RX, + .tx_initiator = BCOM_INITIATOR_PSC5_TX, + .tx_ipr = BCOM_IPR_PSC5_TX, + }, + [5] = { + .rx_initiator = BCOM_INITIATOR_PSC6_RX, + .rx_ipr = BCOM_IPR_PSC6_RX, + .tx_initiator = BCOM_INITIATOR_PSC6_TX, + .tx_ipr = BCOM_IPR_PSC6_TX, + }, +}; + +/** + * bcom_psc_gen_bd_rx_init - Allocate a receive bcom_task for a PSC port + * @psc_num: Number of the PSC to allocate a task for + * @queue_len: number of buffer descriptors to allocate for the task + * @fifo: physical address of FIFO register + * @maxbufsize: Maximum receive data size in bytes. + * + * Allocate a bestcomm task structure for receiving data from a PSC. + */ +struct bcom_task * bcom_psc_gen_bd_rx_init(unsigned psc_num, int queue_len, + phys_addr_t fifo, int maxbufsize) +{ + if (psc_num >= MPC52xx_PSC_MAXNUM) + return NULL; + + return bcom_gen_bd_rx_init(queue_len, fifo, + bcom_psc_params[psc_num].rx_initiator, + bcom_psc_params[psc_num].rx_ipr, + maxbufsize); +} +EXPORT_SYMBOL_GPL(bcom_psc_gen_bd_rx_init); + +/** + * bcom_psc_gen_bd_tx_init - Allocate a transmit bcom_task for a PSC port + * @psc_num: Number of the PSC to allocate a task for + * @queue_len: number of buffer descriptors to allocate for the task + * @fifo: physical address of FIFO register + * + * Allocate a bestcomm task structure for transmitting data to a PSC. + */ +struct bcom_task * +bcom_psc_gen_bd_tx_init(unsigned psc_num, int queue_len, phys_addr_t fifo) +{ + struct psc; + return bcom_gen_bd_tx_init(queue_len, fifo, + bcom_psc_params[psc_num].tx_initiator, + bcom_psc_params[psc_num].tx_ipr); +} +EXPORT_SYMBOL_GPL(bcom_psc_gen_bd_tx_init); + + +MODULE_DESCRIPTION("BestComm General Buffer Descriptor tasks driver"); +MODULE_AUTHOR("Jeff Gibbons "); +MODULE_LICENSE("GPL v2"); + diff --git a/drivers/dma/bestcomm/sram.c b/drivers/dma/bestcomm/sram.c new file mode 100644 index 00000000000..5e2ed30ba2c --- /dev/null +++ b/drivers/dma/bestcomm/sram.c @@ -0,0 +1,178 @@ +/* + * Simple memory allocator for on-board SRAM + * + * + * Maintainer : Sylvain Munaut + * + * Copyright (C) 2005 Sylvain Munaut + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#include + + +/* Struct keeping our 'state' */ +struct bcom_sram *bcom_sram = NULL; +EXPORT_SYMBOL_GPL(bcom_sram); /* needed for inline functions */ + + +/* ======================================================================== */ +/* Public API */ +/* ======================================================================== */ +/* DO NOT USE in interrupts, if needed in irq handler, we should use the + _irqsave version of the spin_locks */ + +int bcom_sram_init(struct device_node *sram_node, char *owner) +{ + int rv; + const u32 *regaddr_p; + u64 regaddr64, size64; + unsigned int psize; + + /* Create our state struct */ + if (bcom_sram) { + printk(KERN_ERR "%s: bcom_sram_init: " + "Already initialized !\n", owner); + return -EBUSY; + } + + bcom_sram = kmalloc(sizeof(struct bcom_sram), GFP_KERNEL); + if (!bcom_sram) { + printk(KERN_ERR "%s: bcom_sram_init: " + "Couldn't allocate internal state !\n", owner); + return -ENOMEM; + } + + /* Get address and size of the sram */ + regaddr_p = of_get_address(sram_node, 0, &size64, NULL); + if (!regaddr_p) { + printk(KERN_ERR "%s: bcom_sram_init: " + "Invalid device node !\n", owner); + rv = -EINVAL; + goto error_free; + } + + regaddr64 = of_translate_address(sram_node, regaddr_p); + + bcom_sram->base_phys = (phys_addr_t) regaddr64; + bcom_sram->size = (unsigned int) size64; + + /* Request region */ + if (!request_mem_region(bcom_sram->base_phys, bcom_sram->size, owner)) { + printk(KERN_ERR "%s: bcom_sram_init: " + "Couldn't request region !\n", owner); + rv = -EBUSY; + goto error_free; + } + + /* Map SRAM */ + /* sram is not really __iomem */ + bcom_sram->base_virt = (void*) ioremap(bcom_sram->base_phys, bcom_sram->size); + + if (!bcom_sram->base_virt) { + printk(KERN_ERR "%s: bcom_sram_init: " + "Map error SRAM zone 0x%08lx (0x%0x)!\n", + owner, (long)bcom_sram->base_phys, bcom_sram->size ); + rv = -ENOMEM; + goto error_release; + } + + /* Create an rheap (defaults to 32 bits word alignment) */ + bcom_sram->rh = rh_create(4); + + /* Attach the free zones */ +#if 0 + /* Currently disabled ... for future use only */ + reg_addr_p = of_get_property(sram_node, "available", &psize); +#else + regaddr_p = NULL; + psize = 0; +#endif + + if (!regaddr_p || !psize) { + /* Attach the whole zone */ + rh_attach_region(bcom_sram->rh, 0, bcom_sram->size); + } else { + /* Attach each zone independently */ + while (psize >= 2 * sizeof(u32)) { + phys_addr_t zbase = of_translate_address(sram_node, regaddr_p); + rh_attach_region(bcom_sram->rh, zbase - bcom_sram->base_phys, regaddr_p[1]); + regaddr_p += 2; + psize -= 2 * sizeof(u32); + } + } + + /* Init our spinlock */ + spin_lock_init(&bcom_sram->lock); + + return 0; + +error_release: + release_mem_region(bcom_sram->base_phys, bcom_sram->size); +error_free: + kfree(bcom_sram); + bcom_sram = NULL; + + return rv; +} +EXPORT_SYMBOL_GPL(bcom_sram_init); + +void bcom_sram_cleanup(void) +{ + /* Free resources */ + if (bcom_sram) { + rh_destroy(bcom_sram->rh); + iounmap((void __iomem *)bcom_sram->base_virt); + release_mem_region(bcom_sram->base_phys, bcom_sram->size); + kfree(bcom_sram); + bcom_sram = NULL; + } +} +EXPORT_SYMBOL_GPL(bcom_sram_cleanup); + +void* bcom_sram_alloc(int size, int align, phys_addr_t *phys) +{ + unsigned long offset; + + spin_lock(&bcom_sram->lock); + offset = rh_alloc_align(bcom_sram->rh, size, align, NULL); + spin_unlock(&bcom_sram->lock); + + if (IS_ERR_VALUE(offset)) + return NULL; + + *phys = bcom_sram->base_phys + offset; + return bcom_sram->base_virt + offset; +} +EXPORT_SYMBOL_GPL(bcom_sram_alloc); + +void bcom_sram_free(void *ptr) +{ + unsigned long offset; + + if (!ptr) + return; + + offset = ptr - bcom_sram->base_virt; + + spin_lock(&bcom_sram->lock); + rh_free(bcom_sram->rh, offset); + spin_unlock(&bcom_sram->lock); +} +EXPORT_SYMBOL_GPL(bcom_sram_free); + -- cgit v1.2.3-70-g09d2