From e7014dada041982ae12ba7fd1967ca0ab0243e04 Mon Sep 17 00:00:00 2001 From: Clemens Ladisch Date: Thu, 1 Apr 2010 16:40:18 +0200 Subject: firewire: ohci: do not clear PHY interrupt status inadvertently The interrupt status bits in PHY register 5 are cleared by writing a one bit. To avoid clearing them unadvertently, do not write them back when they were read as set, but only when they have been explicitly requested to be set. Signed-off-by: Clemens Ladisch Signed-off-by: Stefan Richter --- drivers/firewire/core.h | 1 + drivers/firewire/ohci.c | 7 +++++++ 2 files changed, 8 insertions(+) (limited to 'drivers/firewire') diff --git a/drivers/firewire/core.h b/drivers/firewire/core.h index fb0321300cc..b2a7b651473 100644 --- a/drivers/firewire/core.h +++ b/drivers/firewire/core.h @@ -28,6 +28,7 @@ struct fw_packet; #define PHY_CONTENDER 0x40 #define PHY_BUS_RESET 0x40 #define PHY_BUS_SHORT_RESET 0x40 +#define PHY_INT_STATUS_BITS 0x3c #define BANDWIDTH_AVAILABLE_INITIAL 4915 #define BROADCAST_CHANNEL_INITIAL (1 << 31 | 31) diff --git a/drivers/firewire/ohci.c b/drivers/firewire/ohci.c index 8ebccda94df..525848f71c3 100644 --- a/drivers/firewire/ohci.c +++ b/drivers/firewire/ohci.c @@ -490,6 +490,13 @@ static int ohci_update_phy_reg(struct fw_card *card, int addr, if (err < 0) return err; + /* + * The interrupt status bits are cleared by writing a one bit. + * Avoid clearing them unless explicitly requested in set_bits. + */ + if (addr == 5) + clear_bits |= PHY_INT_STATUS_BITS; + old = (old & ~clear_bits) | set_bits; reg_write(ohci, OHCI1394_PhyControl, OHCI1394_PhyControl_Write(addr, old)); -- cgit v1.2.3-70-g09d2