From 16a5e32b83fd946312b9b13590c75d20c95c5202 Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Fri, 13 Apr 2012 11:14:50 +0100 Subject: drm/radeon: disable MSI on RV515 My rv515 card is very flaky with msi enabled. Every so often it loses a rearm and never comes back, manually banging the rearm brings it back. Reviewed-by: Alex Deucher Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/radeon_irq_kms.c | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'drivers/gpu/drm/radeon') diff --git a/drivers/gpu/drm/radeon/radeon_irq_kms.c b/drivers/gpu/drm/radeon/radeon_irq_kms.c index 66d5fe1c817..65060b77c80 100644 --- a/drivers/gpu/drm/radeon/radeon_irq_kms.c +++ b/drivers/gpu/drm/radeon/radeon_irq_kms.c @@ -147,6 +147,12 @@ static bool radeon_msi_ok(struct radeon_device *rdev) (rdev->pdev->subsystem_device == 0x01fd)) return true; + /* RV515 seems to have MSI issues where it loses + * MSI rearms occasionally. This leads to lockups and freezes. + * disable it by default. + */ + if (rdev->family == CHIP_RV515) + return false; if (rdev->flags & RADEON_IS_IGP) { /* APUs work fine with MSIs */ if (rdev->family >= CHIP_PALM) -- cgit v1.2.3-70-g09d2 From 5273db706f8b673902638fee7f907909ed6ae3f9 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Fri, 13 Apr 2012 10:26:36 -0400 Subject: drm/radeon/si: add missing radeon_bo_unreserve in si_rlc_init() v2 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Forget to unreserve after pinning. This can lead to problems in soft reset and resume. v2: rework patch as per Michel's suggestion. Signed-off-by: Alex Deucher Reviewed-by: Michel Dänzer Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/si.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) (limited to 'drivers/gpu/drm/radeon') diff --git a/drivers/gpu/drm/radeon/si.c b/drivers/gpu/drm/radeon/si.c index ac7a199ffec..27bda986fc2 100644 --- a/drivers/gpu/drm/radeon/si.c +++ b/drivers/gpu/drm/radeon/si.c @@ -2999,8 +2999,8 @@ int si_rlc_init(struct radeon_device *rdev) } r = radeon_bo_pin(rdev->rlc.save_restore_obj, RADEON_GEM_DOMAIN_VRAM, &rdev->rlc.save_restore_gpu_addr); + radeon_bo_unreserve(rdev->rlc.save_restore_obj); if (r) { - radeon_bo_unreserve(rdev->rlc.save_restore_obj); dev_warn(rdev->dev, "(%d) pin RLC sr bo failed\n", r); si_rlc_fini(rdev); return r; @@ -3023,9 +3023,8 @@ int si_rlc_init(struct radeon_device *rdev) } r = radeon_bo_pin(rdev->rlc.clear_state_obj, RADEON_GEM_DOMAIN_VRAM, &rdev->rlc.clear_state_gpu_addr); + radeon_bo_unreserve(rdev->rlc.clear_state_obj); if (r) { - - radeon_bo_unreserve(rdev->rlc.clear_state_obj); dev_warn(rdev->dev, "(%d) pin RLC c bo failed\n", r); si_rlc_fini(rdev); return r; -- cgit v1.2.3-70-g09d2 From e36325071832f1ba96ac54fb8ba1459f08b05dd8 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Wed, 18 Apr 2012 15:21:07 +0200 Subject: drm/radeon/kms: fix the regression of DVI connector check The check of the encoder type in the commit [e00e8b5e: drm/radeon/kms: fix analog load detection on DVI-I connectors] is obviously wrong, and it's the culprit of the regression on my workstation with DVI-analog connection resulting in the blank output. Fixed the typo now. Signed-off-by: Takashi Iwai Reviewed-by: Alex Deucher Cc: Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/radeon_connectors.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/gpu/drm/radeon') diff --git a/drivers/gpu/drm/radeon/radeon_connectors.c b/drivers/gpu/drm/radeon/radeon_connectors.c index bd05156edbd..aa8268dd3cd 100644 --- a/drivers/gpu/drm/radeon/radeon_connectors.c +++ b/drivers/gpu/drm/radeon/radeon_connectors.c @@ -970,7 +970,7 @@ radeon_dvi_detect(struct drm_connector *connector, bool force) encoder = obj_to_encoder(obj); - if (encoder->encoder_type != DRM_MODE_ENCODER_DAC || + if (encoder->encoder_type != DRM_MODE_ENCODER_DAC && encoder->encoder_type != DRM_MODE_ENCODER_TVDAC) continue; -- cgit v1.2.3-70-g09d2 From dfc6ae5bd70d3a22a0e977943c31f6d55fc32820 Mon Sep 17 00:00:00 2001 From: Jerome Glisse Date: Tue, 17 Apr 2012 16:51:38 -0400 Subject: radeon: fix r600/agp when vram is after AGP (v3) If AGP is placed in the middle, the size_af is off-by-one, it results in VRAM being placed at 0x7fffffff instead of 0x8000000. v2: fix the vram_start setup. v3: also fix r7xx & newer ASIC Reported-by: russiane39 on #radeon Signed-off-by: Jerome Glisse Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/r600.c | 4 ++-- drivers/gpu/drm/radeon/rv770.c | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers/gpu/drm/radeon') diff --git a/drivers/gpu/drm/radeon/r600.c b/drivers/gpu/drm/radeon/r600.c index de71243b591..c8187c4b6ae 100644 --- a/drivers/gpu/drm/radeon/r600.c +++ b/drivers/gpu/drm/radeon/r600.c @@ -1135,7 +1135,7 @@ static void r600_vram_gtt_location(struct radeon_device *rdev, struct radeon_mc } if (rdev->flags & RADEON_IS_AGP) { size_bf = mc->gtt_start; - size_af = 0xFFFFFFFF - mc->gtt_end + 1; + size_af = 0xFFFFFFFF - mc->gtt_end; if (size_bf > size_af) { if (mc->mc_vram_size > size_bf) { dev_warn(rdev->dev, "limiting VRAM\n"); @@ -1149,7 +1149,7 @@ static void r600_vram_gtt_location(struct radeon_device *rdev, struct radeon_mc mc->real_vram_size = size_af; mc->mc_vram_size = size_af; } - mc->vram_start = mc->gtt_end; + mc->vram_start = mc->gtt_end + 1; } mc->vram_end = mc->vram_start + mc->mc_vram_size - 1; dev_info(rdev->dev, "VRAM: %lluM 0x%08llX - 0x%08llX (%lluM used)\n", diff --git a/drivers/gpu/drm/radeon/rv770.c b/drivers/gpu/drm/radeon/rv770.c index c62ae4be384..cdab1aeaed6 100644 --- a/drivers/gpu/drm/radeon/rv770.c +++ b/drivers/gpu/drm/radeon/rv770.c @@ -969,7 +969,7 @@ void r700_vram_gtt_location(struct radeon_device *rdev, struct radeon_mc *mc) } if (rdev->flags & RADEON_IS_AGP) { size_bf = mc->gtt_start; - size_af = 0xFFFFFFFF - mc->gtt_end + 1; + size_af = 0xFFFFFFFF - mc->gtt_end; if (size_bf > size_af) { if (mc->mc_vram_size > size_bf) { dev_warn(rdev->dev, "limiting VRAM\n"); @@ -983,7 +983,7 @@ void r700_vram_gtt_location(struct radeon_device *rdev, struct radeon_mc *mc) mc->real_vram_size = size_af; mc->mc_vram_size = size_af; } - mc->vram_start = mc->gtt_end; + mc->vram_start = mc->gtt_end + 1; } mc->vram_end = mc->vram_start + mc->mc_vram_size - 1; dev_info(rdev->dev, "VRAM: %lluM 0x%08llX - 0x%08llX (%lluM used)\n", -- cgit v1.2.3-70-g09d2 From a09d431f344d854e4fe9cfac44f78cb8202f3eb7 Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Thu, 19 Apr 2012 15:42:58 +0100 Subject: drm/radeon: fix load detect on rn50 with hardcoded EDIDs. When the force changes went in back in 3.3.0, we ended up returning disconnected in the !force case, and the connected in when forced, as it hit the hardcoded check. Fix it so all exits go via the hardcoded check and stop spurious modesets on platforms with hardcoded EDIDs. Reported-by: Evan McNabb (Red Hat) Reviewed-by: Alex Deucher Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/radeon_connectors.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/gpu/drm/radeon') diff --git a/drivers/gpu/drm/radeon/radeon_connectors.c b/drivers/gpu/drm/radeon/radeon_connectors.c index aa8268dd3cd..3c2e7a000a2 100644 --- a/drivers/gpu/drm/radeon/radeon_connectors.c +++ b/drivers/gpu/drm/radeon/radeon_connectors.c @@ -1000,6 +1000,7 @@ radeon_dvi_detect(struct drm_connector *connector, bool force) * cases the DVI port is actually a virtual KVM port connected to the service * processor. */ +out: if ((!rdev->is_atom_bios) && (ret == connector_status_disconnected) && rdev->mode_info.bios_hardcoded_edid_size) { @@ -1007,7 +1008,6 @@ radeon_dvi_detect(struct drm_connector *connector, bool force) ret = connector_status_connected; } -out: /* updated in get modes as well since we need to know if it's analog or digital */ radeon_connector_update_scratch_regs(connector, ret); return ret; -- cgit v1.2.3-70-g09d2 From df391c0df49560c7fceffbad5b9d083836d9f22f Mon Sep 17 00:00:00 2001 From: Ilija Hadzic Date: Thu, 19 Apr 2012 12:22:20 -0400 Subject: drm/radeon: add a missing entry to encoder_names An entry for INTERNAL_VCE encoder was missing. Add it. Signed-off-by: Ilija Hadzic Reviewed-by: Alex Deucher Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/radeon_display.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers/gpu/drm/radeon') diff --git a/drivers/gpu/drm/radeon/radeon_display.c b/drivers/gpu/drm/radeon/radeon_display.c index 8086c96e0b0..0a1d4bd65ed 100644 --- a/drivers/gpu/drm/radeon/radeon_display.c +++ b/drivers/gpu/drm/radeon/radeon_display.c @@ -533,7 +533,7 @@ static void radeon_crtc_init(struct drm_device *dev, int index) radeon_legacy_init_crtc(dev, radeon_crtc); } -static const char *encoder_names[36] = { +static const char *encoder_names[37] = { "NONE", "INTERNAL_LVDS", "INTERNAL_TMDS1", @@ -570,6 +570,7 @@ static const char *encoder_names[36] = { "INTERNAL_UNIPHY2", "NUTMEG", "TRAVIS", + "INTERNAL_VCE" }; static const char *connector_names[15] = { -- cgit v1.2.3-70-g09d2 From 37d4174d2d252c37dcb3d88cafae488542087848 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Thu, 19 Apr 2012 10:48:38 -0400 Subject: drm/radeon/kms: use frac fb div on APUs Seems to be more stable on certain monitors. Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=48880 Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/atombios_crtc.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers/gpu/drm/radeon') diff --git a/drivers/gpu/drm/radeon/atombios_crtc.c b/drivers/gpu/drm/radeon/atombios_crtc.c index b5ff1f7b6f7..c5c31e091a9 100644 --- a/drivers/gpu/drm/radeon/atombios_crtc.c +++ b/drivers/gpu/drm/radeon/atombios_crtc.c @@ -575,6 +575,9 @@ static u32 atombios_adjust_pll(struct drm_crtc *crtc, if (rdev->family < CHIP_RV770) pll->flags |= RADEON_PLL_PREFER_MINM_OVER_MAXP; + /* use frac fb div on APUs */ + if (ASIC_IS_DCE41(rdev) || ASIC_IS_DCE61(rdev)) + pll->flags |= RADEON_PLL_USE_FRAC_FB_DIV; } else { pll->flags |= RADEON_PLL_LEGACY; -- cgit v1.2.3-70-g09d2 From 700698e7c303f5095107c62a81872c2c3dad1702 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Fri, 27 Apr 2012 17:18:59 -0400 Subject: drm/radeon/kms: need to set up ss on DP bridges as well Makes Nutmeg DP to VGA bridges work for me. Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=42490 Noticed by Jerome Glisse (after weeks of debugging). Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/atombios_crtc.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/gpu/drm/radeon') diff --git a/drivers/gpu/drm/radeon/atombios_crtc.c b/drivers/gpu/drm/radeon/atombios_crtc.c index c5c31e091a9..af1054f8202 100644 --- a/drivers/gpu/drm/radeon/atombios_crtc.c +++ b/drivers/gpu/drm/radeon/atombios_crtc.c @@ -958,8 +958,8 @@ static void atombios_crtc_set_pll(struct drm_crtc *crtc, struct drm_display_mode break; } - if (radeon_encoder->active_device & - (ATOM_DEVICE_LCD_SUPPORT | ATOM_DEVICE_DFP_SUPPORT)) { + if ((radeon_encoder->active_device & (ATOM_DEVICE_LCD_SUPPORT | ATOM_DEVICE_DFP_SUPPORT)) || + (radeon_encoder_get_dp_bridge_encoder_id(encoder) != ENCODER_OBJECT_ID_NONE)) { struct radeon_encoder_atom_dig *dig = radeon_encoder->enc_priv; struct drm_connector *connector = radeon_get_connector_for_encoder(encoder); -- cgit v1.2.3-70-g09d2 From c994ead62ce9599e56344be9b3bead08f242aa79 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Thu, 3 May 2012 17:06:28 -0400 Subject: drm/radeon: clarify and extend wb setup on APUs and NI+ asics MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Use family rather than DCE check for clarity, also always use wb on APUs, there will never be AGP variants. Signed-off-by: Alex Deucher Reviewed-by: Michel Dänzer Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/radeon_device.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/gpu/drm/radeon') diff --git a/drivers/gpu/drm/radeon/radeon_device.c b/drivers/gpu/drm/radeon/radeon_device.c index ea7df16e2f8..5992502a344 100644 --- a/drivers/gpu/drm/radeon/radeon_device.c +++ b/drivers/gpu/drm/radeon/radeon_device.c @@ -241,8 +241,8 @@ int radeon_wb_init(struct radeon_device *rdev) rdev->wb.use_event = true; } } - /* always use writeback/events on NI */ - if (ASIC_IS_DCE5(rdev)) { + /* always use writeback/events on NI, APUs */ + if (rdev->family >= CHIP_PALM) { rdev->wb.enabled = true; rdev->wb.use_event = true; } -- cgit v1.2.3-70-g09d2