From 4e5643468715260209e42b715e8cd9643456d2bd Mon Sep 17 00:00:00 2001 From: Darren Etheridge Date: Fri, 21 Jun 2013 13:52:23 -0500 Subject: drm/tilcdc: adding some more devicetree config Adding support for max-pixelclock and max-width device tree entries. As some devices that use the tilcdc hardware module have restrictions on the allowed/tested values. Also update DT bindings document to reflect new parameters. Signed-off-by: Darren Etheridge Acked-by: Rob Clark Signed-off-by: Dave Airlie --- drivers/gpu/drm/tilcdc/tilcdc_crtc.c | 23 +++++++++++++++++++++-- 1 file changed, 21 insertions(+), 2 deletions(-) (limited to 'drivers/gpu/drm/tilcdc/tilcdc_crtc.c') diff --git a/drivers/gpu/drm/tilcdc/tilcdc_crtc.c b/drivers/gpu/drm/tilcdc/tilcdc_crtc.c index 5b68fe59e43..b5b865f4f92 100644 --- a/drivers/gpu/drm/tilcdc/tilcdc_crtc.c +++ b/drivers/gpu/drm/tilcdc/tilcdc_crtc.c @@ -443,10 +443,29 @@ int tilcdc_crtc_mode_valid(struct drm_crtc *crtc, struct drm_display_mode *mode) if (mode->vdisplay > 2048) return MODE_VIRTUAL_Y; + /* + * some devices have a maximum allowed pixel clock + * configured from the DT + */ + if (mode->clock > priv->max_pixelclock) { + DBG("Pruning mode, pixel clock too high"); + return MODE_CLOCK_HIGH; + } + + /* + * some devices further limit the max horizontal resolution + * configured from the DT + */ + if (mode->hdisplay > priv->max_width) + return MODE_BAD_WIDTH; + /* filter out modes that would require too much memory bandwidth: */ - bandwidth = mode->hdisplay * mode->vdisplay * drm_mode_vrefresh(mode); - if (bandwidth > priv->max_bandwidth) + bandwidth = mode->hdisplay * mode->vdisplay * + drm_mode_vrefresh(mode); + if (bandwidth > priv->max_bandwidth) { + DBG("Pruning mode, exceeds defined bandwidth limit"); return MODE_BAD; + } return MODE_OK; } -- cgit v1.2.3-70-g09d2