From 40c4ac1c1931eb48ca0cf5e9ec464d13c5921994 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Thu, 20 May 2010 12:04:59 -0400 Subject: drm/radeon/kms: Add crtc tiling setup support for r6xx/r7xx Needed for scanning out of a tiled buffer. Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/atombios_crtc.c | 15 +++++++++++---- drivers/gpu/drm/radeon/r500_reg.h | 5 +++++ 2 files changed, 16 insertions(+), 4 deletions(-) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/radeon/atombios_crtc.c b/drivers/gpu/drm/radeon/atombios_crtc.c index a22d5a3bca4..3b8f087eaf6 100644 --- a/drivers/gpu/drm/radeon/atombios_crtc.c +++ b/drivers/gpu/drm/radeon/atombios_crtc.c @@ -1000,11 +1000,18 @@ static int avivo_crtc_set_base(struct drm_crtc *crtc, int x, int y, return -EINVAL; } - if (tiling_flags & RADEON_TILING_MACRO) - fb_format |= AVIVO_D1GRPH_MACRO_ADDRESS_MODE; + if (rdev->family >= CHIP_R600) { + if (tiling_flags & RADEON_TILING_MACRO) + fb_format |= R600_D1GRPH_ARRAY_MODE_2D_TILED_THIN1; + else if (tiling_flags & RADEON_TILING_MICRO) + fb_format |= R600_D1GRPH_ARRAY_MODE_1D_TILED_THIN1; + } else { + if (tiling_flags & RADEON_TILING_MACRO) + fb_format |= AVIVO_D1GRPH_MACRO_ADDRESS_MODE; - if (tiling_flags & RADEON_TILING_MICRO) - fb_format |= AVIVO_D1GRPH_TILED; + if (tiling_flags & RADEON_TILING_MICRO) + fb_format |= AVIVO_D1GRPH_TILED; + } if (radeon_crtc->crtc_id == 0) WREG32(AVIVO_D1VGA_CONTROL, 0); diff --git a/drivers/gpu/drm/radeon/r500_reg.h b/drivers/gpu/drm/radeon/r500_reg.h index 93c9a2bbccf..6ac1f604e29 100644 --- a/drivers/gpu/drm/radeon/r500_reg.h +++ b/drivers/gpu/drm/radeon/r500_reg.h @@ -386,6 +386,11 @@ # define AVIVO_D1GRPH_TILED (1 << 20) # define AVIVO_D1GRPH_MACRO_ADDRESS_MODE (1 << 21) +# define R600_D1GRPH_ARRAY_MODE_LINEAR_GENERAL (0 << 20) +# define R600_D1GRPH_ARRAY_MODE_LINEAR_ALIGNED (1 << 20) +# define R600_D1GRPH_ARRAY_MODE_1D_TILED_THIN1 (2 << 20) +# define R600_D1GRPH_ARRAY_MODE_2D_TILED_THIN1 (4 << 20) + /* The R7xx *_HIGH surface regs are backwards; the D1 regs are in the D2 * block and vice versa. This applies to GRPH, CUR, etc. */ -- cgit v1.2.3-70-g09d2