From 791cfe2684a74ed7155254816ff9e89e6064277c Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Sun, 21 Nov 2010 10:58:05 -0500 Subject: drm/radeon/kms: fix regression in rs4xx i2c setup typo in my last i2c rework. Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=23222 Signed-off-by: Alex Deucher Cc: stable@kernel.org Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/radeon_combios.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/gpu') diff --git a/drivers/gpu/drm/radeon/radeon_combios.c b/drivers/gpu/drm/radeon/radeon_combios.c index 3bddea5b529..137b8075f6e 100644 --- a/drivers/gpu/drm/radeon/radeon_combios.c +++ b/drivers/gpu/drm/radeon/radeon_combios.c @@ -729,7 +729,7 @@ void radeon_combios_i2c_init(struct radeon_device *rdev) clk = RBIOS8(offset + 3 + (i * 5) + 3); data = RBIOS8(offset + 3 + (i * 5) + 4); i2c = combios_setup_i2c_bus(rdev, DDC_MONID, - clk, data); + (1 << clk), (1 << data)); rdev->i2c_bus[4] = radeon_i2c_create(dev, &i2c, "GPIOPAD_MASK"); break; } -- cgit v1.2.3-70-g09d2 From f24d86f1a49505cdea56728b853a5d0a3f8e3d11 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Fri, 19 Nov 2010 23:27:04 +0000 Subject: drm/radeon/kms: fix resume regression for some r5xx laptops I had removed this when I switched the atom indirect io methods to use the io bar rather than the mmio bar, but it appears it's still needed. Reported-by: Mark Lord Signed-off-by: Alex Deucher Cc: stable@kernel.org Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/atom.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/gpu') diff --git a/drivers/gpu/drm/radeon/atom.c b/drivers/gpu/drm/radeon/atom.c index 8e421f644a5..05efb5b9f13 100644 --- a/drivers/gpu/drm/radeon/atom.c +++ b/drivers/gpu/drm/radeon/atom.c @@ -112,6 +112,7 @@ static uint32_t atom_iio_execute(struct atom_context *ctx, int base, base += 3; break; case ATOM_IIO_WRITE: + (void)ctx->card->ioreg_read(ctx->card, CU16(base + 1)); ctx->card->ioreg_write(ctx->card, CU16(base + 1), temp); base += 3; break; -- cgit v1.2.3-70-g09d2 From a235e4c9302509ac5956bbbffa22eb5ed9fcdc54 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Wed, 24 Nov 2010 22:26:55 -0500 Subject: Revert "drm/radeon/kms: fix typo in r600 cs checker" This reverts commit d33ef52d9db8a36900dd53f2e32db9a521ace259. This change seems to expose a bug in the 3D driver tiggered by certain apps, so revert it to keep userspace working. Reported-by: Rafael J. Wysocki Cc: Rafael J. Wysocki Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/r600_cs.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/gpu') diff --git a/drivers/gpu/drm/radeon/r600_cs.c b/drivers/gpu/drm/radeon/r600_cs.c index 9bebac1ec00..0f90fc3482c 100644 --- a/drivers/gpu/drm/radeon/r600_cs.c +++ b/drivers/gpu/drm/radeon/r600_cs.c @@ -315,7 +315,7 @@ static inline int r600_cs_track_validate_cb(struct radeon_cs_parser *p, int i) if (array_mode == V_0280A0_ARRAY_LINEAR_GENERAL) { /* the initial DDX does bad things with the CB size occasionally */ /* it rounds up height too far for slice tile max but the BO is smaller */ - tmp = (height - 7) * pitch * bpe; + tmp = (height - 7) * 8 * bpe; if ((tmp + track->cb_color_bo_offset[i]) > radeon_bo_size(track->cb_color_bo[i])) { dev_warn(p->dev, "%s offset[%d] %d %d %lu too big\n", __func__, i, track->cb_color_bo_offset[i], tmp, radeon_bo_size(track->cb_color_bo[i])); return -EINVAL; -- cgit v1.2.3-70-g09d2 From bf9dc102e284a5aa78c73fc9d72e11d5ccd8669f Mon Sep 17 00:00:00 2001 From: Keith Packard Date: Fri, 26 Nov 2010 10:45:58 -0800 Subject: drm: Set connector DPMS status to ON in drm_crtc_helper_set_config When setting a new crtc configuration, force the DPMS state of all connectors to ON. Otherwise, they'll be left at OFF and a future mode set that disables the specified connector will not turn the connector off. Signed-off-by: Keith Packard Signed-off-by: Dave Airlie --- drivers/gpu/drm/drm_crtc_helper.c | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'drivers/gpu') diff --git a/drivers/gpu/drm/drm_crtc_helper.c b/drivers/gpu/drm/drm_crtc_helper.c index f7af91cb273..232ee931b4d 100644 --- a/drivers/gpu/drm/drm_crtc_helper.c +++ b/drivers/gpu/drm/drm_crtc_helper.c @@ -471,6 +471,7 @@ int drm_crtc_helper_set_config(struct drm_mode_set *set) int count = 0, ro, fail = 0; struct drm_crtc_helper_funcs *crtc_funcs; int ret = 0; + int i; DRM_DEBUG_KMS("\n"); @@ -666,6 +667,12 @@ int drm_crtc_helper_set_config(struct drm_mode_set *set) if (ret != 0) goto fail; } + DRM_DEBUG_KMS("Setting connector DPMS state to on\n"); + for (i = 0; i < set->num_connectors; i++) { + DRM_DEBUG_KMS("\t[CONNECTOR:%d:%s] set DPMS on\n", set->connectors[i]->base.id, + drm_get_connector_name(set->connectors[i])); + set->connectors[i]->dpms = DRM_MODE_DPMS_ON; + } kfree(save_connectors); kfree(save_encoders); -- cgit v1.2.3-70-g09d2 From c5027dec02c96964847fa68d512318ee5f6f7a19 Mon Sep 17 00:00:00 2001 From: Keith Packard Date: Fri, 26 Nov 2010 10:45:59 -0800 Subject: drm: record monitor status in output_poll_execute In order to correctly report monitor connected status changes, the previous monitor status must be recorded in the connector->status value instead of being discarded. Signed-off-by: Keith Packard Signed-off-by: Dave Airlie --- drivers/gpu/drm/drm_crtc_helper.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) (limited to 'drivers/gpu') diff --git a/drivers/gpu/drm/drm_crtc_helper.c b/drivers/gpu/drm/drm_crtc_helper.c index 232ee931b4d..7ca59359fee 100644 --- a/drivers/gpu/drm/drm_crtc_helper.c +++ b/drivers/gpu/drm/drm_crtc_helper.c @@ -848,7 +848,7 @@ static void output_poll_execute(struct work_struct *work) struct delayed_work *delayed_work = to_delayed_work(work); struct drm_device *dev = container_of(delayed_work, struct drm_device, mode_config.output_poll_work); struct drm_connector *connector; - enum drm_connector_status old_status, status; + enum drm_connector_status old_status; bool repoll = false, changed = false; if (!drm_kms_helper_poll) @@ -873,8 +873,9 @@ static void output_poll_execute(struct work_struct *work) !(connector->polled & DRM_CONNECTOR_POLL_HPD)) continue; - status = connector->funcs->detect(connector, false); - if (old_status != status) + connector->status = connector->funcs->detect(connector, false); + DRM_DEBUG_KMS("connector status updated to %d\n", connector->status); + if (old_status != connector->status) changed = true; } -- cgit v1.2.3-70-g09d2 From c5d1b51d3559664920136b45f4d2366ed9a9e8be Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Mon, 29 Nov 2010 18:00:23 +0000 Subject: drm/i915: Clear pfit registers when not used by any outputs ... otherwise the panel-fitter may be left enabled with random settings and cause unintended filtering (i.e. blurring of native modes on external panels). Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=31942 Reported-and-tested-by: Ben Kohler Tested-by: Ciprian Docan Signed-off-by: Chris Wilson --- drivers/gpu/drm/i915/intel_display.c | 7 ++++++- drivers/gpu/drm/i915/intel_drv.h | 2 +- drivers/gpu/drm/i915/intel_lvds.c | 19 ++++++++++--------- 3 files changed, 17 insertions(+), 11 deletions(-) (limited to 'drivers/gpu') diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index bee24b1a58e..255b52ee009 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -5336,9 +5336,14 @@ static void intel_setup_outputs(struct drm_device *dev) struct drm_i915_private *dev_priv = dev->dev_private; struct intel_encoder *encoder; bool dpd_is_edp = false; + bool has_lvds = false; if (IS_MOBILE(dev) && !IS_I830(dev)) - intel_lvds_init(dev); + has_lvds = intel_lvds_init(dev); + if (!has_lvds && !HAS_PCH_SPLIT(dev)) { + /* disable the panel fitter on everything but LVDS */ + I915_WRITE(PFIT_CONTROL, 0); + } if (HAS_PCH_SPLIT(dev)) { dpd_is_edp = intel_dpd_is_edp(dev); diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h index 21551fe7454..e52c6125bb1 100644 --- a/drivers/gpu/drm/i915/intel_drv.h +++ b/drivers/gpu/drm/i915/intel_drv.h @@ -237,7 +237,7 @@ extern bool intel_sdvo_init(struct drm_device *dev, int output_device); extern void intel_dvo_init(struct drm_device *dev); extern void intel_tv_init(struct drm_device *dev); extern void intel_mark_busy(struct drm_device *dev, struct drm_gem_object *obj); -extern void intel_lvds_init(struct drm_device *dev); +extern bool intel_lvds_init(struct drm_device *dev); extern void intel_dp_init(struct drm_device *dev, int dp_reg); void intel_dp_set_m_n(struct drm_crtc *crtc, struct drm_display_mode *mode, diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c index 4324a326f98..f79327fc665 100644 --- a/drivers/gpu/drm/i915/intel_lvds.c +++ b/drivers/gpu/drm/i915/intel_lvds.c @@ -837,7 +837,7 @@ static bool intel_lvds_ddc_probe(struct drm_device *dev, u8 pin) * Create the connector, register the LVDS DDC bus, and try to figure out what * modes we can display on the LVDS panel (if present). */ -void intel_lvds_init(struct drm_device *dev) +bool intel_lvds_init(struct drm_device *dev) { struct drm_i915_private *dev_priv = dev->dev_private; struct intel_lvds *intel_lvds; @@ -853,37 +853,37 @@ void intel_lvds_init(struct drm_device *dev) /* Skip init on machines we know falsely report LVDS */ if (dmi_check_system(intel_no_lvds)) - return; + return false; pin = GMBUS_PORT_PANEL; if (!lvds_is_present_in_vbt(dev, &pin)) { DRM_DEBUG_KMS("LVDS is not present in VBT\n"); - return; + return false; } if (HAS_PCH_SPLIT(dev)) { if ((I915_READ(PCH_LVDS) & LVDS_DETECTED) == 0) - return; + return false; if (dev_priv->edp.support) { DRM_DEBUG_KMS("disable LVDS for eDP support\n"); - return; + return false; } } if (!intel_lvds_ddc_probe(dev, pin)) { DRM_DEBUG_KMS("LVDS did not respond to DDC probe\n"); - return; + return false; } intel_lvds = kzalloc(sizeof(struct intel_lvds), GFP_KERNEL); if (!intel_lvds) { - return; + return false; } intel_connector = kzalloc(sizeof(struct intel_connector), GFP_KERNEL); if (!intel_connector) { kfree(intel_lvds); - return; + return false; } if (!HAS_PCH_SPLIT(dev)) { @@ -1026,7 +1026,7 @@ out: /* keep the LVDS connector */ dev_priv->int_lvds_connector = connector; drm_sysfs_connector_add(connector); - return; + return true; failed: DRM_DEBUG_KMS("No LVDS modes found, disabling.\n"); @@ -1034,4 +1034,5 @@ failed: drm_encoder_cleanup(encoder); kfree(intel_lvds); kfree(intel_connector); + return false; } -- cgit v1.2.3-70-g09d2 From 3cf2efb1a7c68d55d60dcb2ed9609e1a2fc25952 Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Mon, 29 Nov 2010 10:09:55 +0000 Subject: Revert "drm/i915/dp: use VBT provided eDP params if available" This reverts commit 869184a675662bddcdf76c5b95665272facff2b8. This is required for the Sony Vaio Jesse was working on at the time, but breaks most other eDP machines - machines that were working in earlier kernels. Reported-and-tested-by: Dave Airlie Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=31188 Tested-by: Zhao Jian Signed-off-by: Chris Wilson --- drivers/gpu/drm/i915/intel_dp.c | 146 ++++++++++++++++------------------------ 1 file changed, 57 insertions(+), 89 deletions(-) (limited to 'drivers/gpu') diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c index c8e00555331..300f64b4238 100644 --- a/drivers/gpu/drm/i915/intel_dp.c +++ b/drivers/gpu/drm/i915/intel_dp.c @@ -584,17 +584,6 @@ intel_dp_mode_fixup(struct drm_encoder *encoder, struct drm_display_mode *mode, mode->clock = dev_priv->panel_fixed_mode->clock; } - /* Just use VBT values for eDP */ - if (is_edp(intel_dp)) { - intel_dp->lane_count = dev_priv->edp.lanes; - intel_dp->link_bw = dev_priv->edp.rate; - adjusted_mode->clock = intel_dp_link_clock(intel_dp->link_bw); - DRM_DEBUG_KMS("eDP link bw %02x lane count %d clock %d\n", - intel_dp->link_bw, intel_dp->lane_count, - adjusted_mode->clock); - return true; - } - for (lane_count = 1; lane_count <= max_lane_count; lane_count <<= 1) { for (clock = 0; clock <= max_clock; clock++) { int link_avail = intel_dp_max_data_rate(intel_dp_link_clock(bws[clock]), lane_count); @@ -613,6 +602,19 @@ intel_dp_mode_fixup(struct drm_encoder *encoder, struct drm_display_mode *mode, } } + if (is_edp(intel_dp)) { + /* okay we failed just pick the highest */ + intel_dp->lane_count = max_lane_count; + intel_dp->link_bw = bws[max_clock]; + adjusted_mode->clock = intel_dp_link_clock(intel_dp->link_bw); + DRM_DEBUG_KMS("Force picking display port link bw %02x lane " + "count %d clock %d\n", + intel_dp->link_bw, intel_dp->lane_count, + adjusted_mode->clock); + + return true; + } + return false; } @@ -1087,21 +1089,11 @@ intel_get_adjust_train(struct intel_dp *intel_dp) } static uint32_t -intel_dp_signal_levels(struct intel_dp *intel_dp) +intel_dp_signal_levels(uint8_t train_set, int lane_count) { - struct drm_device *dev = intel_dp->base.base.dev; - struct drm_i915_private *dev_priv = dev->dev_private; - uint32_t signal_levels = 0; - u8 train_set = intel_dp->train_set[0]; - u32 vswing = train_set & DP_TRAIN_VOLTAGE_SWING_MASK; - u32 preemphasis = train_set & DP_TRAIN_PRE_EMPHASIS_MASK; + uint32_t signal_levels = 0; - if (is_edp(intel_dp)) { - vswing = dev_priv->edp.vswing; - preemphasis = dev_priv->edp.preemphasis; - } - - switch (vswing) { + switch (train_set & DP_TRAIN_VOLTAGE_SWING_MASK) { case DP_TRAIN_VOLTAGE_SWING_400: default: signal_levels |= DP_VOLTAGE_0_4; @@ -1116,7 +1108,7 @@ intel_dp_signal_levels(struct intel_dp *intel_dp) signal_levels |= DP_VOLTAGE_1_2; break; } - switch (preemphasis) { + switch (train_set & DP_TRAIN_PRE_EMPHASIS_MASK) { case DP_TRAIN_PRE_EMPHASIS_0: default: signal_levels |= DP_PRE_EMPHASIS_0; @@ -1202,18 +1194,6 @@ intel_channel_eq_ok(struct intel_dp *intel_dp) return true; } -static bool -intel_dp_aux_handshake_required(struct intel_dp *intel_dp) -{ - struct drm_device *dev = intel_dp->base.base.dev; - struct drm_i915_private *dev_priv = dev->dev_private; - - if (is_edp(intel_dp) && dev_priv->no_aux_handshake) - return false; - - return true; -} - static bool intel_dp_set_link_train(struct intel_dp *intel_dp, uint32_t dp_reg_value, @@ -1226,9 +1206,6 @@ intel_dp_set_link_train(struct intel_dp *intel_dp, I915_WRITE(intel_dp->output_reg, dp_reg_value); POSTING_READ(intel_dp->output_reg); - if (!intel_dp_aux_handshake_required(intel_dp)) - return true; - intel_dp_aux_native_write_1(intel_dp, DP_TRAINING_PATTERN_SET, dp_train_pat); @@ -1261,11 +1238,10 @@ intel_dp_start_link_train(struct intel_dp *intel_dp) POSTING_READ(intel_dp->output_reg); intel_wait_for_vblank(dev, intel_crtc->pipe); - if (intel_dp_aux_handshake_required(intel_dp)) - /* Write the link configuration data */ - intel_dp_aux_native_write(intel_dp, DP_LINK_BW_SET, - intel_dp->link_configuration, - DP_LINK_CONFIGURATION_SIZE); + /* Write the link configuration data */ + intel_dp_aux_native_write(intel_dp, DP_LINK_BW_SET, + intel_dp->link_configuration, + DP_LINK_CONFIGURATION_SIZE); DP |= DP_PORT_EN; if (HAS_PCH_CPT(dev) && !is_edp(intel_dp)) @@ -1283,7 +1259,7 @@ intel_dp_start_link_train(struct intel_dp *intel_dp) signal_levels = intel_gen6_edp_signal_levels(intel_dp->train_set[0]); DP = (DP & ~EDP_LINK_TRAIN_VOL_EMP_MASK_SNB) | signal_levels; } else { - signal_levels = intel_dp_signal_levels(intel_dp); + signal_levels = intel_dp_signal_levels(intel_dp->train_set[0], intel_dp->lane_count); DP = (DP & ~(DP_VOLTAGE_MASK|DP_PRE_EMPHASIS_MASK)) | signal_levels; } @@ -1297,37 +1273,33 @@ intel_dp_start_link_train(struct intel_dp *intel_dp) break; /* Set training pattern 1 */ - udelay(500); - if (intel_dp_aux_handshake_required(intel_dp)) { + udelay(100); + if (!intel_dp_get_link_status(intel_dp)) break; - } else { - if (!intel_dp_get_link_status(intel_dp)) - break; - if (intel_clock_recovery_ok(intel_dp->link_status, intel_dp->lane_count)) { - clock_recovery = true; - break; - } + if (intel_clock_recovery_ok(intel_dp->link_status, intel_dp->lane_count)) { + clock_recovery = true; + break; + } - /* Check to see if we've tried the max voltage */ - for (i = 0; i < intel_dp->lane_count; i++) - if ((intel_dp->train_set[i] & DP_TRAIN_MAX_SWING_REACHED) == 0) - break; - if (i == intel_dp->lane_count) + /* Check to see if we've tried the max voltage */ + for (i = 0; i < intel_dp->lane_count; i++) + if ((intel_dp->train_set[i] & DP_TRAIN_MAX_SWING_REACHED) == 0) break; + if (i == intel_dp->lane_count) + break; - /* Check to see if we've tried the same voltage 5 times */ - if ((intel_dp->train_set[0] & DP_TRAIN_VOLTAGE_SWING_MASK) == voltage) { - ++tries; - if (tries == 5) - break; - } else - tries = 0; - voltage = intel_dp->train_set[0] & DP_TRAIN_VOLTAGE_SWING_MASK; + /* Check to see if we've tried the same voltage 5 times */ + if ((intel_dp->train_set[0] & DP_TRAIN_VOLTAGE_SWING_MASK) == voltage) { + ++tries; + if (tries == 5) + break; + } else + tries = 0; + voltage = intel_dp->train_set[0] & DP_TRAIN_VOLTAGE_SWING_MASK; - /* Compute new intel_dp->train_set as requested by target */ - intel_get_adjust_train(intel_dp); - } + /* Compute new intel_dp->train_set as requested by target */ + intel_get_adjust_train(intel_dp); } intel_dp->DP = DP; @@ -1354,7 +1326,7 @@ intel_dp_complete_link_train(struct intel_dp *intel_dp) signal_levels = intel_gen6_edp_signal_levels(intel_dp->train_set[0]); DP = (DP & ~EDP_LINK_TRAIN_VOL_EMP_MASK_SNB) | signal_levels; } else { - signal_levels = intel_dp_signal_levels(intel_dp); + signal_levels = intel_dp_signal_levels(intel_dp->train_set[0], intel_dp->lane_count); DP = (DP & ~(DP_VOLTAGE_MASK|DP_PRE_EMPHASIS_MASK)) | signal_levels; } @@ -1368,28 +1340,24 @@ intel_dp_complete_link_train(struct intel_dp *intel_dp) DP_TRAINING_PATTERN_2)) break; - udelay(500); - - if (!intel_dp_aux_handshake_required(intel_dp)) { + udelay(400); + if (!intel_dp_get_link_status(intel_dp)) break; - } else { - if (!intel_dp_get_link_status(intel_dp)) - break; - if (intel_channel_eq_ok(intel_dp)) { - channel_eq = true; - break; - } + if (intel_channel_eq_ok(intel_dp)) { + channel_eq = true; + break; + } - /* Try 5 times */ - if (tries > 5) - break; + /* Try 5 times */ + if (tries > 5) + break; - /* Compute new intel_dp->train_set as requested by target */ - intel_get_adjust_train(intel_dp); - ++tries; - } + /* Compute new intel_dp->train_set as requested by target */ + intel_get_adjust_train(intel_dp); + ++tries; } + if (HAS_PCH_CPT(dev) && !is_edp(intel_dp)) reg = DP | DP_LINK_TRAIN_OFF_CPT; else -- cgit v1.2.3-70-g09d2 From 0ec80d645661dda50acd417bdfcb33df2e5dd31e Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Tue, 30 Nov 2010 19:11:45 -0500 Subject: drm/radeon/kms: fix typos in disabled vbios code 6xx/7xx was hitting the wrong BUS_CNTL reg and bits. Signed-off-by: Alex Deucher Cc: stable@kernel.org Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/r600_reg.h | 1 + drivers/gpu/drm/radeon/radeon_bios.c | 13 +++++++------ 2 files changed, 8 insertions(+), 6 deletions(-) (limited to 'drivers/gpu') diff --git a/drivers/gpu/drm/radeon/r600_reg.h b/drivers/gpu/drm/radeon/r600_reg.h index d84612ae47e..33cda016b08 100644 --- a/drivers/gpu/drm/radeon/r600_reg.h +++ b/drivers/gpu/drm/radeon/r600_reg.h @@ -86,6 +86,7 @@ #define R600_HDP_NONSURFACE_BASE 0x2c04 #define R600_BUS_CNTL 0x5420 +# define R600_BIOS_ROM_DIS (1 << 1) #define R600_CONFIG_CNTL 0x5424 #define R600_CONFIG_MEMSIZE 0x5428 #define R600_CONFIG_F0_BASE 0x542C diff --git a/drivers/gpu/drm/radeon/radeon_bios.c b/drivers/gpu/drm/radeon/radeon_bios.c index 654787ec43f..8f2c7b50dcf 100644 --- a/drivers/gpu/drm/radeon/radeon_bios.c +++ b/drivers/gpu/drm/radeon/radeon_bios.c @@ -130,6 +130,7 @@ static bool radeon_atrm_get_bios(struct radeon_device *rdev) } return true; } + static bool r700_read_disabled_bios(struct radeon_device *rdev) { uint32_t viph_control; @@ -143,7 +144,7 @@ static bool r700_read_disabled_bios(struct radeon_device *rdev) bool r; viph_control = RREG32(RADEON_VIPH_CONTROL); - bus_cntl = RREG32(RADEON_BUS_CNTL); + bus_cntl = RREG32(R600_BUS_CNTL); d1vga_control = RREG32(AVIVO_D1VGA_CONTROL); d2vga_control = RREG32(AVIVO_D2VGA_CONTROL); vga_render_control = RREG32(AVIVO_VGA_RENDER_CONTROL); @@ -152,7 +153,7 @@ static bool r700_read_disabled_bios(struct radeon_device *rdev) /* disable VIP */ WREG32(RADEON_VIPH_CONTROL, (viph_control & ~RADEON_VIPH_EN)); /* enable the rom */ - WREG32(RADEON_BUS_CNTL, (bus_cntl & ~RADEON_BUS_BIOS_DIS_ROM)); + WREG32(R600_BUS_CNTL, (bus_cntl & ~R600_BIOS_ROM_DIS)); /* Disable VGA mode */ WREG32(AVIVO_D1VGA_CONTROL, (d1vga_control & ~(AVIVO_DVGA_CONTROL_MODE_ENABLE | @@ -191,7 +192,7 @@ static bool r700_read_disabled_bios(struct radeon_device *rdev) cg_spll_status = RREG32(R600_CG_SPLL_STATUS); } WREG32(RADEON_VIPH_CONTROL, viph_control); - WREG32(RADEON_BUS_CNTL, bus_cntl); + WREG32(R600_BUS_CNTL, bus_cntl); WREG32(AVIVO_D1VGA_CONTROL, d1vga_control); WREG32(AVIVO_D2VGA_CONTROL, d2vga_control); WREG32(AVIVO_VGA_RENDER_CONTROL, vga_render_control); @@ -216,7 +217,7 @@ static bool r600_read_disabled_bios(struct radeon_device *rdev) bool r; viph_control = RREG32(RADEON_VIPH_CONTROL); - bus_cntl = RREG32(RADEON_BUS_CNTL); + bus_cntl = RREG32(R600_BUS_CNTL); d1vga_control = RREG32(AVIVO_D1VGA_CONTROL); d2vga_control = RREG32(AVIVO_D2VGA_CONTROL); vga_render_control = RREG32(AVIVO_VGA_RENDER_CONTROL); @@ -231,7 +232,7 @@ static bool r600_read_disabled_bios(struct radeon_device *rdev) /* disable VIP */ WREG32(RADEON_VIPH_CONTROL, (viph_control & ~RADEON_VIPH_EN)); /* enable the rom */ - WREG32(RADEON_BUS_CNTL, (bus_cntl & ~RADEON_BUS_BIOS_DIS_ROM)); + WREG32(R600_BUS_CNTL, (bus_cntl & ~R600_BIOS_ROM_DIS)); /* Disable VGA mode */ WREG32(AVIVO_D1VGA_CONTROL, (d1vga_control & ~(AVIVO_DVGA_CONTROL_MODE_ENABLE | @@ -262,7 +263,7 @@ static bool r600_read_disabled_bios(struct radeon_device *rdev) /* restore regs */ WREG32(RADEON_VIPH_CONTROL, viph_control); - WREG32(RADEON_BUS_CNTL, bus_cntl); + WREG32(R600_BUS_CNTL, bus_cntl); WREG32(AVIVO_D1VGA_CONTROL, d1vga_control); WREG32(AVIVO_D2VGA_CONTROL, d2vga_control); WREG32(AVIVO_VGA_RENDER_CONTROL, vga_render_control); -- cgit v1.2.3-70-g09d2 From c49948f4bd39e27dd06a1cdb0c3743ca2a734f5e Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Tue, 30 Nov 2010 15:46:47 -0500 Subject: drm/radeon/kms: fix interlaced and doublescan handling Signed-off-by: Alex Deucher Cc: stable@kernel.org Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/radeon_connectors.c | 34 ++++++++++++++++++++++++++++++ 1 file changed, 34 insertions(+) (limited to 'drivers/gpu') diff --git a/drivers/gpu/drm/radeon/radeon_connectors.c b/drivers/gpu/drm/radeon/radeon_connectors.c index 3bef9f6d66f..8afaf7a7459 100644 --- a/drivers/gpu/drm/radeon/radeon_connectors.c +++ b/drivers/gpu/drm/radeon/radeon_connectors.c @@ -1175,6 +1175,8 @@ radeon_add_atom_connector(struct drm_device *dev, /* no HPD on analog connectors */ radeon_connector->hpd.hpd = RADEON_HPD_NONE; connector->polled = DRM_CONNECTOR_POLL_CONNECT; + connector->interlace_allowed = true; + connector->doublescan_allowed = true; break; case DRM_MODE_CONNECTOR_DVIA: drm_connector_init(dev, &radeon_connector->base, &radeon_vga_connector_funcs, connector_type); @@ -1190,6 +1192,8 @@ radeon_add_atom_connector(struct drm_device *dev, 1); /* no HPD on analog connectors */ radeon_connector->hpd.hpd = RADEON_HPD_NONE; + connector->interlace_allowed = true; + connector->doublescan_allowed = true; break; case DRM_MODE_CONNECTOR_DVII: case DRM_MODE_CONNECTOR_DVID: @@ -1226,6 +1230,11 @@ radeon_add_atom_connector(struct drm_device *dev, rdev->mode_info.load_detect_property, 1); } + connector->interlace_allowed = true; + if (connector_type == DRM_MODE_CONNECTOR_DVII) + connector->doublescan_allowed = true; + else + connector->doublescan_allowed = false; break; case DRM_MODE_CONNECTOR_HDMIA: case DRM_MODE_CONNECTOR_HDMIB: @@ -1256,6 +1265,11 @@ radeon_add_atom_connector(struct drm_device *dev, 0); } subpixel_order = SubPixelHorizontalRGB; + connector->interlace_allowed = true; + if (connector_type == DRM_MODE_CONNECTOR_HDMIB) + connector->doublescan_allowed = true; + else + connector->doublescan_allowed = false; break; case DRM_MODE_CONNECTOR_DisplayPort: case DRM_MODE_CONNECTOR_eDP: @@ -1293,6 +1307,9 @@ radeon_add_atom_connector(struct drm_device *dev, rdev->mode_info.underscan_vborder_property, 0); } + connector->interlace_allowed = true; + /* in theory with a DP to VGA converter... */ + connector->doublescan_allowed = false; break; case DRM_MODE_CONNECTOR_SVIDEO: case DRM_MODE_CONNECTOR_Composite: @@ -1308,6 +1325,8 @@ radeon_add_atom_connector(struct drm_device *dev, radeon_atombios_get_tv_info(rdev)); /* no HPD on analog connectors */ radeon_connector->hpd.hpd = RADEON_HPD_NONE; + connector->interlace_allowed = false; + connector->doublescan_allowed = false; break; case DRM_MODE_CONNECTOR_LVDS: radeon_dig_connector = kzalloc(sizeof(struct radeon_connector_atom_dig), GFP_KERNEL); @@ -1326,6 +1345,8 @@ radeon_add_atom_connector(struct drm_device *dev, dev->mode_config.scaling_mode_property, DRM_MODE_SCALE_FULLSCREEN); subpixel_order = SubPixelHorizontalRGB; + connector->interlace_allowed = false; + connector->doublescan_allowed = false; break; } @@ -1403,6 +1424,8 @@ radeon_add_legacy_connector(struct drm_device *dev, /* no HPD on analog connectors */ radeon_connector->hpd.hpd = RADEON_HPD_NONE; connector->polled = DRM_CONNECTOR_POLL_CONNECT; + connector->interlace_allowed = true; + connector->doublescan_allowed = true; break; case DRM_MODE_CONNECTOR_DVIA: drm_connector_init(dev, &radeon_connector->base, &radeon_vga_connector_funcs, connector_type); @@ -1418,6 +1441,8 @@ radeon_add_legacy_connector(struct drm_device *dev, 1); /* no HPD on analog connectors */ radeon_connector->hpd.hpd = RADEON_HPD_NONE; + connector->interlace_allowed = true; + connector->doublescan_allowed = true; break; case DRM_MODE_CONNECTOR_DVII: case DRM_MODE_CONNECTOR_DVID: @@ -1435,6 +1460,11 @@ radeon_add_legacy_connector(struct drm_device *dev, 1); } subpixel_order = SubPixelHorizontalRGB; + connector->interlace_allowed = true; + if (connector_type == DRM_MODE_CONNECTOR_DVII) + connector->doublescan_allowed = true; + else + connector->doublescan_allowed = false; break; case DRM_MODE_CONNECTOR_SVIDEO: case DRM_MODE_CONNECTOR_Composite: @@ -1457,6 +1487,8 @@ radeon_add_legacy_connector(struct drm_device *dev, radeon_combios_get_tv_info(rdev)); /* no HPD on analog connectors */ radeon_connector->hpd.hpd = RADEON_HPD_NONE; + connector->interlace_allowed = false; + connector->doublescan_allowed = false; break; case DRM_MODE_CONNECTOR_LVDS: drm_connector_init(dev, &radeon_connector->base, &radeon_lvds_connector_funcs, connector_type); @@ -1470,6 +1502,8 @@ radeon_add_legacy_connector(struct drm_device *dev, dev->mode_config.scaling_mode_property, DRM_MODE_SCALE_FULLSCREEN); subpixel_order = SubPixelHorizontalRGB; + connector->interlace_allowed = false; + connector->doublescan_allowed = false; break; } -- cgit v1.2.3-70-g09d2 From 3074adc8b6d9bf28b574a58241b958057a69a7a0 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Tue, 30 Nov 2010 00:15:10 -0500 Subject: drm/radeon/kms: add workaround for dce3 ddc line vbios bug fixes: https://bugzilla.kernel.org/show_bug.cgi?id=23752 Signed-off-by: Alex Deucher Cc:stable@kernel.org Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/radeon_atombios.c | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) (limited to 'drivers/gpu') diff --git a/drivers/gpu/drm/radeon/radeon_atombios.c b/drivers/gpu/drm/radeon/radeon_atombios.c index 87ead090c7d..bc5a2c3382d 100644 --- a/drivers/gpu/drm/radeon/radeon_atombios.c +++ b/drivers/gpu/drm/radeon/radeon_atombios.c @@ -98,6 +98,14 @@ static inline struct radeon_i2c_bus_rec radeon_lookup_i2c_gpio(struct radeon_dev } } + /* some DCE3 boards have bad data for this entry */ + if (ASIC_IS_DCE3(rdev)) { + if ((i == 4) && + (gpio->usClkMaskRegisterIndex == 0x1fda) && + (gpio->sucI2cId.ucAccess == 0x94)) + gpio->sucI2cId.ucAccess = 0x14; + } + if (gpio->sucI2cId.ucAccess == id) { i2c.mask_clk_reg = le16_to_cpu(gpio->usClkMaskRegisterIndex) * 4; i2c.mask_data_reg = le16_to_cpu(gpio->usDataMaskRegisterIndex) * 4; @@ -174,6 +182,14 @@ void radeon_atombios_i2c_init(struct radeon_device *rdev) } } + /* some DCE3 boards have bad data for this entry */ + if (ASIC_IS_DCE3(rdev)) { + if ((i == 4) && + (gpio->usClkMaskRegisterIndex == 0x1fda) && + (gpio->sucI2cId.ucAccess == 0x94)) + gpio->sucI2cId.ucAccess = 0x14; + } + i2c.mask_clk_reg = le16_to_cpu(gpio->usClkMaskRegisterIndex) * 4; i2c.mask_data_reg = le16_to_cpu(gpio->usDataMaskRegisterIndex) * 4; i2c.en_clk_reg = le16_to_cpu(gpio->usClkEnRegisterIndex) * 4; -- cgit v1.2.3-70-g09d2 From 220cad3cbf553f893432919b458da36489373fc6 Mon Sep 17 00:00:00 2001 From: Eric Anholt Date: Thu, 18 Nov 2010 09:32:58 +0800 Subject: drm/i915: Always set the DP transcoder config to 8BPC. The pipe is always set to 8BPC, but here we were leaving whatever previous bits were set by the BIOS in place. Signed-off-by: Eric Anholt Tested-by: Keith Packard Signed-off-by: Chris Wilson Cc: stable@kernel.org --- drivers/gpu/drm/i915/i915_reg.h | 1 + drivers/gpu/drm/i915/intel_display.c | 4 +++- 2 files changed, 4 insertions(+), 1 deletion(-) (limited to 'drivers/gpu') diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index 25ed911a311..878fc766a12 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -3033,6 +3033,7 @@ #define TRANS_DP_10BPC (1<<9) #define TRANS_DP_6BPC (2<<9) #define TRANS_DP_12BPC (3<<9) +#define TRANS_DP_BPC_MASK (3<<9) #define TRANS_DP_VSYNC_ACTIVE_HIGH (1<<4) #define TRANS_DP_VSYNC_ACTIVE_LOW 0 #define TRANS_DP_HSYNC_ACTIVE_HIGH (1<<3) diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 255b52ee009..9d3af3cb5a0 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -2120,9 +2120,11 @@ static void ironlake_crtc_enable(struct drm_crtc *crtc) reg = TRANS_DP_CTL(pipe); temp = I915_READ(reg); temp &= ~(TRANS_DP_PORT_SEL_MASK | - TRANS_DP_SYNC_MASK); + TRANS_DP_SYNC_MASK | + TRANS_DP_BPC_MASK); temp |= (TRANS_DP_OUTPUT_ENABLE | TRANS_DP_ENH_FRAMING); + temp |= TRANS_DP_8BPC; if (crtc->mode.flags & DRM_MODE_FLAG_PHSYNC) temp |= TRANS_DP_HSYNC_ACTIVE_HIGH; -- cgit v1.2.3-70-g09d2 From 5bddd17fec58f253cddd0bc9eab2cd9eb1bbab4a Mon Sep 17 00:00:00 2001 From: Eric Anholt Date: Thu, 18 Nov 2010 09:32:59 +0800 Subject: drm/i915: Apply a workaround for transitioning from DP on pipe B to HDMI. This workaround only applies to Ironlake. Signed-off-by: Eric Anholt Signed-off-by: Chris Wilson Cc: stable@kernel.org --- drivers/gpu/drm/i915/intel_dp.c | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+) (limited to 'drivers/gpu') diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c index 300f64b4238..1d8d068bc47 100644 --- a/drivers/gpu/drm/i915/intel_dp.c +++ b/drivers/gpu/drm/i915/intel_dp.c @@ -1374,6 +1374,7 @@ intel_dp_link_down(struct intel_dp *intel_dp) { struct drm_device *dev = intel_dp->base.base.dev; struct drm_i915_private *dev_priv = dev->dev_private; + struct intel_crtc *intel_crtc = to_intel_crtc(intel_dp->base.base.crtc); uint32_t DP = intel_dp->DP; DRM_DEBUG_KMS("\n"); @@ -1398,6 +1399,26 @@ intel_dp_link_down(struct intel_dp *intel_dp) if (is_edp(intel_dp)) DP |= DP_LINK_TRAIN_OFF; + + if (!HAS_PCH_CPT(dev) && (DP & DP_PIPEB_SELECT)) { + /* Hardware workaround: leaving our transcoder select + * set to transcoder B while it's off will prevent the + * corresponding HDMI output on transcoder A. + * + * Combine this with another hardware workaround: + * transcoder select bit can only be cleared while the + * port is enabled. + */ + DP &= ~DP_PIPEB_SELECT; + I915_WRITE(intel_dp->output_reg, DP); + + /* Changes to enable or select take place the vblank + * after being written. + */ + intel_wait_for_vblank(intel_dp->base.base.dev, + intel_crtc->pipe); + } + I915_WRITE(intel_dp->output_reg, DP & ~DP_PORT_EN); POSTING_READ(intel_dp->output_reg); } -- cgit v1.2.3-70-g09d2