From eceb784cec4dc0fcc2993d9ee4a7c0d111ada80a Mon Sep 17 00:00:00 2001 From: Zhenyu Wang Date: Mon, 25 Jan 2010 10:35:16 +0800 Subject: drm/i915: disable hotplug detect before Ironlake CRT detect This tries to fix CRT detect loop hang seen on some Ironlake form factor, to clear up hotplug detect state before taking CRT detect to make sure next hotplug detect cycle is consistent. Cc: Stable Team Signed-off-by: Zhenyu Wang Signed-off-by: Eric Anholt --- drivers/gpu/drm/i915/intel_crt.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers/gpu') diff --git a/drivers/gpu/drm/i915/intel_crt.c b/drivers/gpu/drm/i915/intel_crt.c index ddefc871edf..79dd4026586 100644 --- a/drivers/gpu/drm/i915/intel_crt.c +++ b/drivers/gpu/drm/i915/intel_crt.c @@ -157,6 +157,9 @@ static bool intel_ironlake_crt_detect_hotplug(struct drm_connector *connector) adpa = I915_READ(PCH_ADPA); adpa &= ~ADPA_CRT_HOTPLUG_MASK; + /* disable HPD first */ + I915_WRITE(PCH_ADPA, adpa); + (void)I915_READ(PCH_ADPA); adpa |= (ADPA_CRT_HOTPLUG_PERIOD_128 | ADPA_CRT_HOTPLUG_WARMUP_10MS | -- cgit v1.2.3-70-g09d2 From 0ce907f89118aa8748f950700b6919b1d8d8a038 Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Sat, 23 Jan 2010 20:26:35 +0000 Subject: drm/i915: Prevent use of uninitialized pointers along error path. X.org hang with [drm:i915_gem_do_execbuffer] *ERROR* in dmesg http://bugzilla.kernel.org/show_bug.cgi?id=15114 Matej found he was hitting an error path within i915_gem_do_execbuffer() that led to the attempt to dereference an uninitialised pointer during cleanup. This path used to be safe as we used to calloc the object lists, but this was changed in c8e0f93. Daniel Vetter had also spotted this error and proposed a similar patch. [ 6379.732892] [drm:i915_gem_do_execbuffer] *ERROR* Object ffff880098cd6540 appears more than once in object list [ 6379.740976] [drm:i915_gem_do_execbuffer] *ERROR* Object ffff880098cd6540 appears more than once in object list [ 6379.740995] BUG: unable to handle kernel NULL pointer dereference at 00000000000000a0 [ 6379.740998] IP: [] i915_gem_do_execbuffer+0xba5/0x1260 [ 6379.741006] PGD babab067 PUD bb435067 PMD 0 [ 6379.741010] Oops: 0002 [#1] PREEMPT SMP [ 6379.741014] last sysfs file: /sys/devices/pci0000:00/0000:00:1c.2/0000:06:00.0/ieee80211/phy0/rfkill0/state [ 6379.741017] CPU 1 [ 6379.741021] Pid: 2186, comm: X Not tainted 2.6.33-rc4-00399-g24bc734 #142 M11D/ESPRIMO Mobile M9400 [ 6379.741023] RIP: 0010:[] [] i915_gem_do_execbuffer+0xba5/0x1260 [ 6379.741027] RSP: 0018:ffff8800b9047b78 EFLAGS: 00213206 [ 6379.741029] RAX: 0000000000000000 RBX: 000000000000004f RCX: ffff880098cac800 [ 6379.741032] RDX: ffff880098caca78 RSI: ffff8800b9047c98 RDI: ffff880098cd6540 [ 6379.741034] RBP: ffff8800b9047c78 R08: ffffffff814b96b5 R09: 0000000000000006 [ 6379.741036] R10: 0000000000000000 R11: 0000000000000003 R12: 000000000000004e [ 6379.741038] R13: 00000000fffffff7 R14: 0000000000000000 R15: 0000000000000001 [ 6379.741041] FS: 0000000000000000(0000) GS:ffff880001900000(0063) knlGS:00000000f72636c0 [ 6379.741043] CS: 0010 DS: 002b ES: 002b CR0: 0000000080050033 [ 6379.741041] FS: 0000000000000000(0000) GS:ffff880001900000(0063) knlGS:00000000f72636c0 [ 6379.741043] CS: 0010 DS: 002b ES: 002b CR0: 0000000080050033 [ 6379.741045] CR2: 00000000000000a0 CR3: 00000000b9000000 CR4: 00000000000006e0 [ 6379.741048] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 6379.741050] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [ 6379.741052] Process X (pid: 2186, threadinfo ffff8800b9046000, task ffff8800bb5d8000) [ 6379.741054] Stack: [ 6379.741055] ffffc90023f57000 ffffc90023f56fff ffffc90023f56fff ffffc90023f55000 [ 6379.741059] <0> ffff8800b9047c98 ffff8800bb43c840 ffff8800bf1de800 ffff8800bf1de820 [ 6379.741063] <0> ffff8800b9047bd8 ffff880098cac800 0000000000000000 0000000000000002 [ 6379.741068] Call Trace: [ 6379.741072] [] ? i915_gem_execbuffer+0x6b/0x370 [ 6379.741077] [] ? __vmalloc_node+0xa2/0xb0 [ 6379.741080] [] ? i915_gem_execbuffer+0x6b/0x370 [ 6379.741083] [] i915_gem_execbuffer+0x1b6/0x370 [ 6379.741086] [] drm_ioctl+0x1d5/0x460 [ 6379.741089] [] ? i915_gem_execbuffer+0x0/0x370 [ 6379.741093] [] i915_compat_ioctl+0x45/0x50 [ 6379.741097] [] compat_sys_ioctl+0xa9/0x1570 [ 6379.741102] [] ? vfs_read+0x13c/0x1a0 [ 6379.741106] [] sysenter_dispatch+0x7/0x2b [ 6379.741108] Code: 08 85 c0 74 52 31 db 0f 1f 80 00 00 00 00 48 63 c3 48 8b 8d 68 ff ff ff 48 8d 14 c1 48 8b 02 48 85 c0 74 25 48 8b 80 80 00 00 00 80 a0 00 00 00 00 00 00 00 48 8b 3a 48 85 ff 74 0c 48 c7 c6 [ 6379.741142] RIP [] i915_gem_do_execbuffer+0xba5/0x1260 [ 6379.741145] RSP [ 6379.741147] CR2: 00000000000000a0 [ 6379.741159] ---[ end trace 0598809afa4c31db ]--- Reported-by: Matej Laitl Signed-off-by: Chris Wilson Signed-off-by: Eric Anholt --- drivers/gpu/drm/i915/i915_gem.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'drivers/gpu') diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index 0c67924ca80..1ef7ec4f38f 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -3742,6 +3742,8 @@ i915_gem_do_execbuffer(struct drm_device *dev, void *data, if (object_list[i] == NULL) { DRM_ERROR("Invalid object handle %d at index %d\n", exec_list[i].handle, i); + /* prevent error path from reading uninitialized data */ + args->buffer_count = i + 1; ret = -EBADF; goto err; } @@ -3750,6 +3752,8 @@ i915_gem_do_execbuffer(struct drm_device *dev, void *data, if (obj_priv->in_execbuffer) { DRM_ERROR("Object %p appears more than once in object list\n", object_list[i]); + /* prevent error path from reading uninitialized data */ + args->buffer_count = i + 1; ret = -EBADF; goto err; } -- cgit v1.2.3-70-g09d2 From c062df61966405b0be6743bfb0cf300dca2fa7c2 Mon Sep 17 00:00:00 2001 From: Li Peng Date: Sat, 23 Jan 2010 00:12:58 +0800 Subject: drm/i915: enable vblank interrupt on ironlake so far vblank interrupt on ironlake is disabled, this would cause bad gfx performance if userspace calls drm_wait_vblank. This patch enables vblank interrupt on ironlake and follows vblank get/put model. Signed-off-by: Li Peng Acked-by: Zhenyu Wang Signed-off-by: Eric Anholt --- drivers/gpu/drm/i915/i915_irq.c | 30 +++++++++++++++++++----------- drivers/gpu/drm/i915/intel_display.c | 1 + 2 files changed, 20 insertions(+), 11 deletions(-) (limited to 'drivers/gpu') diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c index 89a071a3e6f..e7472d82132 100644 --- a/drivers/gpu/drm/i915/i915_irq.c +++ b/drivers/gpu/drm/i915/i915_irq.c @@ -309,6 +309,12 @@ irqreturn_t ironlake_irq_handler(struct drm_device *dev) if (de_iir & DE_GSE) ironlake_opregion_gse_intr(dev); + if (de_iir & DE_PIPEA_VBLANK) + drm_handle_vblank(dev, 0); + + if (de_iir & DE_PIPEB_VBLANK) + drm_handle_vblank(dev, 1); + /* check event from PCH */ if ((de_iir & DE_PCH_EVENT) && (pch_iir & SDE_HOTPLUG_MASK)) { @@ -844,11 +850,11 @@ int i915_enable_vblank(struct drm_device *dev, int pipe) if (!(pipeconf & PIPEACONF_ENABLE)) return -EINVAL; - if (IS_IRONLAKE(dev)) - return 0; - spin_lock_irqsave(&dev_priv->user_irq_lock, irqflags); - if (IS_I965G(dev)) + if (IS_IRONLAKE(dev)) + ironlake_enable_display_irq(dev_priv, (pipe == 0) ? + DE_PIPEA_VBLANK: DE_PIPEB_VBLANK); + else if (IS_I965G(dev)) i915_enable_pipestat(dev_priv, pipe, PIPE_START_VBLANK_INTERRUPT_ENABLE); else @@ -866,13 +872,14 @@ void i915_disable_vblank(struct drm_device *dev, int pipe) drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; unsigned long irqflags; - if (IS_IRONLAKE(dev)) - return; - spin_lock_irqsave(&dev_priv->user_irq_lock, irqflags); - i915_disable_pipestat(dev_priv, pipe, - PIPE_VBLANK_INTERRUPT_ENABLE | - PIPE_START_VBLANK_INTERRUPT_ENABLE); + if (IS_IRONLAKE(dev)) + ironlake_disable_display_irq(dev_priv, (pipe == 0) ? + DE_PIPEA_VBLANK: DE_PIPEB_VBLANK); + else + i915_disable_pipestat(dev_priv, pipe, + PIPE_VBLANK_INTERRUPT_ENABLE | + PIPE_START_VBLANK_INTERRUPT_ENABLE); spin_unlock_irqrestore(&dev_priv->user_irq_lock, irqflags); } @@ -1015,7 +1022,8 @@ static int ironlake_irq_postinstall(struct drm_device *dev) { drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; /* enable kind of interrupts always enabled */ - u32 display_mask = DE_MASTER_IRQ_CONTROL | DE_GSE | DE_PCH_EVENT; + u32 display_mask = DE_MASTER_IRQ_CONTROL | DE_GSE | DE_PCH_EVENT | + DE_PIPEA_VBLANK | DE_PIPEB_VBLANK; u32 render_mask = GT_USER_INTERRUPT; u32 hotplug_mask = SDE_CRT_HOTPLUG | SDE_PORTB_HOTPLUG | SDE_PORTC_HOTPLUG | SDE_PORTD_HOTPLUG; diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 45da78ef4a9..2cc489b6629 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -1638,6 +1638,7 @@ static void ironlake_crtc_dpms(struct drm_crtc *crtc, int mode) case DRM_MODE_DPMS_OFF: DRM_DEBUG_KMS("crtc %d dpms off\n", pipe); + drm_vblank_off(dev, pipe); /* Disable display plane */ temp = I915_READ(dspcntr_reg); if ((temp & DISPLAY_PLANE_ENABLE) != 0) { -- cgit v1.2.3-70-g09d2 From 8a6c77d645d9111f7bc01f908464301f5c3e0a05 Mon Sep 17 00:00:00 2001 From: Li Peng Date: Thu, 21 Jan 2010 18:45:46 +0800 Subject: drm/i915: Fix the device info of Pineview Pineview doesn't has CXSR and need GTT-based hardware status page. It fixes a X boot hung issue on Pinview since commit cfdf1f Signed-off-by: Li Peng Acked-by: Zhao Yakui Signed-off-by: Eric Anholt --- drivers/gpu/drm/i915/i915_drv.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/gpu') diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c index 46d88965852..ecac882e1d5 100644 --- a/drivers/gpu/drm/i915/i915_drv.c +++ b/drivers/gpu/drm/i915/i915_drv.c @@ -120,7 +120,7 @@ const static struct intel_device_info intel_gm45_info = { const static struct intel_device_info intel_pineview_info = { .is_g33 = 1, .is_pineview = 1, .is_mobile = 1, .is_i9xx = 1, - .has_pipe_cxsr = 1, + .need_gfx_hws = 1, .has_hotplug = 1, }; -- cgit v1.2.3-70-g09d2 From de3f440f8c9922afe8770dd16c84f1c87d779b59 Mon Sep 17 00:00:00 2001 From: Jesse Barnes Date: Thu, 14 Jan 2010 13:18:02 -0800 Subject: drm/i915: handle non-flip pending case when unpinning the scanout buffer The first page flip queued will replace the current front buffer, which should have a 0 pending flip count. So at finish time we need to handle that case (i.e. if the flip count is 0 *or* dec_and_test is 0 we need to wake the waiters). Also fix up an error path in the queue function and add some debug output (only enabled with driver debugging). Signed-off-by: Jesse Barnes Signed-off-by: Eric Anholt --- drivers/gpu/drm/i915/intel_display.c | 20 ++++++++++++++++++-- 1 file changed, 18 insertions(+), 2 deletions(-) (limited to 'drivers/gpu') diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 2cc489b6629..5f14dfbf715 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -3985,6 +3985,12 @@ void intel_finish_page_flip(struct drm_device *dev, int pipe) spin_lock_irqsave(&dev->event_lock, flags); work = intel_crtc->unpin_work; if (work == NULL || !work->pending) { + if (work && !work->pending) { + obj_priv = work->obj->driver_private; + DRM_DEBUG_DRIVER("flip finish: %p (%d) not pending?\n", + obj_priv, + atomic_read(&obj_priv->pending_flip)); + } spin_unlock_irqrestore(&dev->event_lock, flags); return; } @@ -4006,7 +4012,10 @@ void intel_finish_page_flip(struct drm_device *dev, int pipe) spin_unlock_irqrestore(&dev->event_lock, flags); obj_priv = work->obj->driver_private; - if (atomic_dec_and_test(&obj_priv->pending_flip)) + + /* Initial scanout buffer will have a 0 pending flip count */ + if ((atomic_read(&obj_priv->pending_flip) == 0) || + atomic_dec_and_test(&obj_priv->pending_flip)) DRM_WAKEUP(&dev_priv->pending_flip_queue); schedule_work(&work->work); } @@ -4019,8 +4028,11 @@ void intel_prepare_page_flip(struct drm_device *dev, int plane) unsigned long flags; spin_lock_irqsave(&dev->event_lock, flags); - if (intel_crtc->unpin_work) + if (intel_crtc->unpin_work) { intel_crtc->unpin_work->pending = 1; + } else { + DRM_DEBUG_DRIVER("preparing flip with no unpin work?\n"); + } spin_unlock_irqrestore(&dev->event_lock, flags); } @@ -4054,6 +4066,7 @@ static int intel_crtc_page_flip(struct drm_crtc *crtc, /* We borrow the event spin lock for protecting unpin_work */ spin_lock_irqsave(&dev->event_lock, flags); if (intel_crtc->unpin_work) { + DRM_DEBUG_DRIVER("flip queue: crtc already busy\n"); spin_unlock_irqrestore(&dev->event_lock, flags); kfree(work); mutex_unlock(&dev->struct_mutex); @@ -4067,7 +4080,10 @@ static int intel_crtc_page_flip(struct drm_crtc *crtc, ret = intel_pin_and_fence_fb_obj(dev, obj); if (ret != 0) { + DRM_DEBUG_DRIVER("flip queue: %p pin & fence failed\n", + obj->driver_private); kfree(work); + intel_crtc->unpin_work = NULL; mutex_unlock(&dev->struct_mutex); return ret; } -- cgit v1.2.3-70-g09d2 From 643ced9b0b4810b5725910667604f1a373f30f2f Mon Sep 17 00:00:00 2001 From: Li Peng Date: Thu, 28 Jan 2010 01:05:09 +0800 Subject: drm/i915: don't trigger ironlake vblank interrupt at irq install Zhenyu noticed that the ironlake vblank enabling patch has one issue that it will trigger vblank starting from irq postinstall, this isn't necessary. This patch addresses this issue by only adding the vblank into DEIER but mask them in DEIMR, so that it won't trigger vblank interrupt at irq install. Signed-off-by: Li Peng Acked-by: Zhenyu Wang Signed-off-by: Eric Anholt --- drivers/gpu/drm/i915/i915_irq.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) (limited to 'drivers/gpu') diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c index e7472d82132..fcd87ad75fe 100644 --- a/drivers/gpu/drm/i915/i915_irq.c +++ b/drivers/gpu/drm/i915/i915_irq.c @@ -1022,14 +1022,13 @@ static int ironlake_irq_postinstall(struct drm_device *dev) { drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; /* enable kind of interrupts always enabled */ - u32 display_mask = DE_MASTER_IRQ_CONTROL | DE_GSE | DE_PCH_EVENT | - DE_PIPEA_VBLANK | DE_PIPEB_VBLANK; + u32 display_mask = DE_MASTER_IRQ_CONTROL | DE_GSE | DE_PCH_EVENT; u32 render_mask = GT_USER_INTERRUPT; u32 hotplug_mask = SDE_CRT_HOTPLUG | SDE_PORTB_HOTPLUG | SDE_PORTC_HOTPLUG | SDE_PORTD_HOTPLUG; dev_priv->irq_mask_reg = ~display_mask; - dev_priv->de_irq_enable_reg = display_mask; + dev_priv->de_irq_enable_reg = display_mask | DE_PIPEA_VBLANK | DE_PIPEB_VBLANK; /* should always can generate irq */ I915_WRITE(DEIIR, I915_READ(DEIIR)); -- cgit v1.2.3-70-g09d2 From 2dd873838805a6e84c1afdfbf13e8709bfb5c70f Mon Sep 17 00:00:00 2001 From: Zhao Yakui Date: Wed, 27 Jan 2010 16:32:46 +0800 Subject: drm/i915: Add support for SDVO composite TV Signed-off-by: Zhao Yakui Signed-off-by: Eric Anholt --- drivers/gpu/drm/i915/intel_sdvo.c | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'drivers/gpu') diff --git a/drivers/gpu/drm/i915/intel_sdvo.c b/drivers/gpu/drm/i915/intel_sdvo.c index eaacfd0920d..82678d30ab0 100644 --- a/drivers/gpu/drm/i915/intel_sdvo.c +++ b/drivers/gpu/drm/i915/intel_sdvo.c @@ -2345,6 +2345,14 @@ intel_sdvo_output_setup(struct intel_output *intel_output, uint16_t flags) connector->connector_type = DRM_MODE_CONNECTOR_VGA; intel_output->clone_mask = (1 << INTEL_SDVO_NON_TV_CLONE_BIT) | (1 << INTEL_ANALOG_CLONE_BIT); + } else if (flags & SDVO_OUTPUT_CVBS0) { + + sdvo_priv->controlled_output = SDVO_OUTPUT_CVBS0; + encoder->encoder_type = DRM_MODE_ENCODER_TVDAC; + connector->connector_type = DRM_MODE_CONNECTOR_SVIDEO; + sdvo_priv->is_tv = true; + intel_output->needs_tv_clock = true; + intel_output->clone_mask = 1 << INTEL_SDVO_TV_CLONE_BIT; } else if (flags & SDVO_OUTPUT_LVDS0) { sdvo_priv->controlled_output = SDVO_OUTPUT_LVDS0; -- cgit v1.2.3-70-g09d2 From f034b12dbb5749b11e9390e15e93ffa87ece8038 Mon Sep 17 00:00:00 2001 From: Zhao Yakui Date: Thu, 21 Jan 2010 15:20:18 +0800 Subject: drm/i915: Fix the incorrect DMI string for Samsung SX20S laptop Signed-off-by: Zhao Yakui Reported-by: Philipp Kohlbecher Signed-off-by: Eric Anholt --- drivers/gpu/drm/i915/intel_lvds.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/gpu') diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c index aa74e59bec6..75a9772061c 100644 --- a/drivers/gpu/drm/i915/intel_lvds.c +++ b/drivers/gpu/drm/i915/intel_lvds.c @@ -611,7 +611,7 @@ static const struct dmi_system_id bad_lid_status[] = { { .ident = "Samsung SX20S", .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "Phoenix Technologies LTD"), + DMI_MATCH(DMI_SYS_VENDOR, "Samsung Electronics"), DMI_MATCH(DMI_BOARD_NAME, "SX20S"), }, }, -- cgit v1.2.3-70-g09d2 From 013d5aa2bbb2ceacba7a0dad7f2a0eb20133323f Mon Sep 17 00:00:00 2001 From: Jesse Barnes Date: Fri, 29 Jan 2010 11:18:31 -0800 Subject: drm/i915: page flip support for Ironlake This patch adds support for page flipping on Ironlake, which uses different interrupt bits for triggering flip submit IRQs. Signed-off-by: Jesse Barnes [anholt: hand-resolved for rebasing off of render power saving patch] Signed-off-by: Eric Anholt --- drivers/gpu/drm/i915/i915_irq.c | 17 ++++++++++++++--- 1 file changed, 14 insertions(+), 3 deletions(-) (limited to 'drivers/gpu') diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c index fcd87ad75fe..50ddf4a95c5 100644 --- a/drivers/gpu/drm/i915/i915_irq.c +++ b/drivers/gpu/drm/i915/i915_irq.c @@ -309,11 +309,21 @@ irqreturn_t ironlake_irq_handler(struct drm_device *dev) if (de_iir & DE_GSE) ironlake_opregion_gse_intr(dev); - if (de_iir & DE_PIPEA_VBLANK) + if (de_iir & DE_PLANEA_FLIP_DONE) + intel_prepare_page_flip(dev, 0); + + if (de_iir & DE_PLANEB_FLIP_DONE) + intel_prepare_page_flip(dev, 1); + + if (de_iir & DE_PIPEA_VBLANK) { drm_handle_vblank(dev, 0); + intel_finish_page_flip(dev, 0); + } - if (de_iir & DE_PIPEB_VBLANK) + if (de_iir & DE_PIPEB_VBLANK) { drm_handle_vblank(dev, 1); + intel_finish_page_flip(dev, 1); + } /* check event from PCH */ if ((de_iir & DE_PCH_EVENT) && @@ -1022,7 +1032,8 @@ static int ironlake_irq_postinstall(struct drm_device *dev) { drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; /* enable kind of interrupts always enabled */ - u32 display_mask = DE_MASTER_IRQ_CONTROL | DE_GSE | DE_PCH_EVENT; + u32 display_mask = DE_MASTER_IRQ_CONTROL | DE_GSE | DE_PCH_EVENT | + DE_PLANEA_FLIP_DONE | DE_PLANEB_FLIP_DONE; u32 render_mask = GT_USER_INTERRUPT; u32 hotplug_mask = SDE_CRT_HOTPLUG | SDE_PORTB_HOTPLUG | SDE_PORTC_HOTPLUG | SDE_PORTD_HOTPLUG; -- cgit v1.2.3-70-g09d2 From 33c5fd121eabbccc9103daf6cda36941eb3c349f Mon Sep 17 00:00:00 2001 From: David John Date: Wed, 27 Jan 2010 15:19:08 +0530 Subject: drm/i915: Disable SR when more than one pipe is enabled Self Refresh should be disabled on dual plane configs. Otherwise, as the SR watermark is not calculated for such configs, switching to non VGA mode causes FIFO underrun and display flicker. This fixes Korg Bug #14897. Signed-off-by: David John Signed-off-by: Jesse Barnes Cc: stable@kernel.org Signed-off-by: Eric Anholt --- drivers/gpu/drm/i915/intel_display.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) (limited to 'drivers/gpu') diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 5f14dfbf715..12775df1bbf 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -2520,6 +2520,10 @@ static void g4x_update_wm(struct drm_device *dev, int planea_clock, sr_entries = roundup(sr_entries / cacheline_size, 1); DRM_DEBUG("self-refresh entries: %d\n", sr_entries); I915_WRITE(FW_BLC_SELF, FW_BLC_SELF_EN); + } else { + /* Turn off self refresh if both pipes are enabled */ + I915_WRITE(FW_BLC_SELF, I915_READ(FW_BLC_SELF) + & ~FW_BLC_SELF_EN); } DRM_DEBUG("Setting FIFO watermarks - A: %d, B: %d, SR %d\n", @@ -2563,6 +2567,10 @@ static void i965_update_wm(struct drm_device *dev, int planea_clock, srwm = 1; srwm &= 0x3f; I915_WRITE(FW_BLC_SELF, FW_BLC_SELF_EN); + } else { + /* Turn off self refresh if both pipes are enabled */ + I915_WRITE(FW_BLC_SELF, I915_READ(FW_BLC_SELF) + & ~FW_BLC_SELF_EN); } DRM_DEBUG_KMS("Setting FIFO watermarks - A: 8, B: 8, C: 8, SR %d\n", @@ -2631,6 +2639,10 @@ static void i9xx_update_wm(struct drm_device *dev, int planea_clock, if (srwm < 0) srwm = 1; I915_WRITE(FW_BLC_SELF, FW_BLC_SELF_EN | (srwm & 0x3f)); + } else { + /* Turn off self refresh if both pipes are enabled */ + I915_WRITE(FW_BLC_SELF, I915_READ(FW_BLC_SELF) + & ~FW_BLC_SELF_EN); } DRM_DEBUG_KMS("Setting FIFO watermarks - A: %d, B: %d, C: %d, SR %d\n", -- cgit v1.2.3-70-g09d2 From 67026e03244d76b8f1fa725b079d4182fe8910aa Mon Sep 17 00:00:00 2001 From: Thomas Meyer Date: Tue, 2 Feb 2010 20:09:04 +0100 Subject: drm/i915: slow acpi_lid_open() causes flickering - V2 acpi_lid_open() could take up to 10ms on my computer. Some component is calling the drm GETCONNECTOR ioctl many times in a row. This results in flickering (for example, when starting a video). Fix it by assuming an always connected lid status. Signed-off-by: Thomas Meyer Signed-off-by: Eric Anholt --- drivers/gpu/drm/i915/intel_lvds.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) (limited to 'drivers/gpu') diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c index 75a9772061c..b1d0acbae4e 100644 --- a/drivers/gpu/drm/i915/intel_lvds.c +++ b/drivers/gpu/drm/i915/intel_lvds.c @@ -622,6 +622,13 @@ static const struct dmi_system_id bad_lid_status[] = { DMI_MATCH(DMI_PRODUCT_NAME, "Aspire one"), }, }, + { + .ident = "Aspire 1810T", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Acer"), + DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 1810T"), + }, + }, { .ident = "PC-81005", .matches = { @@ -643,7 +650,7 @@ static enum drm_connector_status intel_lvds_detect(struct drm_connector *connect { enum drm_connector_status status = connector_status_connected; - if (!acpi_lid_open() && !dmi_check_system(bad_lid_status)) + if (!dmi_check_system(bad_lid_status) && !acpi_lid_open()) status = connector_status_disconnected; return status; -- cgit v1.2.3-70-g09d2 From 93533c291a0af78ca57115fc44d2e6c4c9517cd2 Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Sun, 31 Jan 2010 10:40:48 +0000 Subject: drm/i915: Fix leak of relocs along do_execbuffer error path Following a gpu hang, we would leak the relocation buffer. So simply earrange the error path to always free the relocation buffer. Signed-off-by: Chris Wilson Signed-off-by: Eric Anholt --- drivers/gpu/drm/i915/i915_gem.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) (limited to 'drivers/gpu') diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index 1ef7ec4f38f..be0fd1a6332 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -3584,6 +3584,9 @@ i915_gem_put_relocs_to_user(struct drm_i915_gem_exec_object2 *exec_list, uint32_t reloc_count = 0, i; int ret = 0; + if (relocs == NULL) + return 0; + for (i = 0; i < buffer_count; i++) { struct drm_i915_gem_relocation_entry __user *user_relocs; int unwritten; @@ -3673,7 +3676,7 @@ i915_gem_do_execbuffer(struct drm_device *dev, void *data, struct drm_gem_object *batch_obj; struct drm_i915_gem_object *obj_priv; struct drm_clip_rect *cliprects = NULL; - struct drm_i915_gem_relocation_entry *relocs; + struct drm_i915_gem_relocation_entry *relocs = NULL; int ret = 0, ret2, i, pinned = 0; uint64_t exec_offset; uint32_t seqno, flush_domains, reloc_index; @@ -3950,6 +3953,7 @@ err: mutex_unlock(&dev->struct_mutex); +pre_mutex_err: /* Copy the updated relocations out regardless of current error * state. Failure to update the relocs would mean that the next * time userland calls execbuf, it would do so with presumed offset @@ -3964,7 +3968,6 @@ err: ret = ret2; } -pre_mutex_err: drm_free_large(object_list); kfree(cliprects); -- cgit v1.2.3-70-g09d2