From da54a0ced4502dc2a25df034f218463a2a50488d Mon Sep 17 00:00:00 2001 From: Jiri Kosina Date: Thu, 25 Mar 2010 15:34:34 +0100 Subject: HID: update BKL comment in hiddev Update comment explaining BKL usage in legacy hiddev driver. Signed-off-by: Jiri Kosina --- drivers/hid/usbhid/hiddev.c | 19 +++++++++++++++++-- 1 file changed, 17 insertions(+), 2 deletions(-) (limited to 'drivers/hid/usbhid') diff --git a/drivers/hid/usbhid/hiddev.c b/drivers/hid/usbhid/hiddev.c index 433602aed46..c24d2fa3e3b 100644 --- a/drivers/hid/usbhid/hiddev.c +++ b/drivers/hid/usbhid/hiddev.c @@ -267,6 +267,7 @@ static int hiddev_open(struct inode *inode, struct file *file) struct hiddev_list *list; int res, i; + /* See comment in hiddev_connect() for BKL explanation */ lock_kernel(); i = iminor(inode) - HIDDEV_MINOR_BASE; @@ -894,8 +895,22 @@ int hiddev_connect(struct hid_device *hid, unsigned int force) hiddev->hid = hid; hiddev->exist = 1; - /* when lock_kernel() usage is fixed in usb_open(), - * we could also fix it here */ + /* + * BKL here is used to avoid race after usb_register_dev(). + * Once the device node has been created, open() could happen on it. + * The code below will then fail, as hiddev_table hasn't been + * updated. + * + * The obvious fix -- introducing mutex to guard hiddev_table[] + * doesn't work, as usb_open() and usb_register_dev() both take + * minor_rwsem, thus we'll have ABBA deadlock. + * + * Before BKL pushdown, usb_open() had been acquiring it in right + * order, so _open() was safe to use it to protect from this race. + * Now the order is different, but AB-BA deadlock still doesn't occur + * as BKL is dropped on schedule() (i.e. while sleeping on + * minor_rwsem). Fugly. + */ lock_kernel(); retval = usb_register_dev(usbhid->intf, &hiddev_class); if (retval) { -- cgit v1.2.3-70-g09d2 From b8c21cf697d165999cc21a90e6caa73690ac6190 Mon Sep 17 00:00:00 2001 From: Bruno Prémont Date: Tue, 30 Mar 2010 22:34:30 +0200 Subject: HID: add framebuffer support to PicoLCD device MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Add framebuffer support to PicoLCD device with use of deferred-io. Only changed areas of framebuffer get sent to device in order to save USB bandwidth and especially resources on PicoLCD device or allow higher refresh rate for a small area. Changed tiles are determined while updating shadow framebuffer. Signed-off-by: Bruno Prémont Signed-off-by: Jiri Kosina --- Documentation/ABI/testing/sysfs-driver-hid-picolcd | 17 + drivers/hid/Kconfig | 7 +- drivers/hid/hid-picolcd.c | 567 ++++++++++++++++++++- drivers/hid/usbhid/hid-core.c | 1 + 4 files changed, 590 insertions(+), 2 deletions(-) (limited to 'drivers/hid/usbhid') diff --git a/Documentation/ABI/testing/sysfs-driver-hid-picolcd b/Documentation/ABI/testing/sysfs-driver-hid-picolcd index 6fb4f21469f..14f52d70621 100644 --- a/Documentation/ABI/testing/sysfs-driver-hid-picolcd +++ b/Documentation/ABI/testing/sysfs-driver-hid-picolcd @@ -15,3 +15,20 @@ Description: Make it possible to switch the PicoLCD device between LCD disconnected and reconnects after above delay (default value is 5 seconds though this default should not be relied on). + +What: /sys/bus/usb/devices/-:./::./fb_update_rate +Date: March 2010 +Contact: Bruno Prémont +Description: Make it possible to adjust defio refresh rate. + + Reading: returns list of available refresh rates (expressed in Hz), + the active refresh rate being enclosed in brackets ('[' and ']') + + Writing: accepts new refresh rate expressed in integer Hz + within permitted rates. + + Note: As device can barely do 2 complete refreshes a second + it only makes sense to adjust this value if only one or two + tiles get changed and it's not appropriate to expect the application + to flush it's tiny changes explicitely at higher than default rate. + diff --git a/drivers/hid/Kconfig b/drivers/hid/Kconfig index 138ba6a277e..a813ea9c792 100644 --- a/drivers/hid/Kconfig +++ b/drivers/hid/Kconfig @@ -265,6 +265,11 @@ config HID_PETALYNX config HID_PICOLCD tristate "PicoLCD (graphic version)" depends on USB_HID + select FB_DEFERRED_IO if FB + select FB_SYS_FILLRECT if FB + select FB_SYS_COPYAREA if FB + select FB_SYS_IMAGEBLIT if FB + select FB_SYS_FOPS if FB ---help--- This provides support for Minibox PicoLCD devices, currently only the graphical ones are supported. @@ -272,8 +277,8 @@ config HID_PICOLCD This includes support for the following device features: - Keypad - Switching between Firmware and Flash mode - Features that are not (yet) supported: - Framebuffer for monochrome 256x64 display + Features that are not (yet) supported: - Backlight control - Contrast control - IR diff --git a/drivers/hid/hid-picolcd.c b/drivers/hid/hid-picolcd.c index c7855f38889..e14464789e1 100644 --- a/drivers/hid/hid-picolcd.c +++ b/drivers/hid/hid-picolcd.c @@ -24,6 +24,9 @@ #include "usbhid/usbhid.h" #include +#include +#include + #include #include @@ -69,6 +72,59 @@ #define REPORT_HOOK_VERSION 0xf7 /* LCD: IN[2], OUT[1] */ #define REPORT_EXIT_FLASHER 0xff /* Bootloader: OUT[2] */ +#if defined(CONFIG_FB) || defined(CONFIG_FB_MODULE) +/* Framebuffer + * + * The PicoLCD use a Topway LCD module of 256x64 pixel + * This display area is tiled over 4 controllers with 8 tiles + * each. Each tile has 8x64 pixel, each data byte representing + * a 1-bit wide vertical line of the tile. + * + * The display can be updated at a tile granularity. + * + * Chip 1 Chip 2 Chip 3 Chip 4 + * +----------------+----------------+----------------+----------------+ + * | Tile 1 | Tile 1 | Tile 1 | Tile 1 | + * +----------------+----------------+----------------+----------------+ + * | Tile 2 | Tile 2 | Tile 2 | Tile 2 | + * +----------------+----------------+----------------+----------------+ + * ... + * +----------------+----------------+----------------+----------------+ + * | Tile 8 | Tile 8 | Tile 8 | Tile 8 | + * +----------------+----------------+----------------+----------------+ + */ +#define PICOLCDFB_NAME "picolcdfb" +#define PICOLCDFB_WIDTH (256) +#define PICOLCDFB_HEIGHT (64) +#define PICOLCDFB_SIZE (PICOLCDFB_WIDTH * PICOLCDFB_HEIGHT / 8) + +#define PICOLCDFB_UPDATE_RATE_LIMIT 10 +#define PICOLCDFB_UPDATE_RATE_DEFAULT 2 + +/* Framebuffer visual structures */ +static const struct fb_fix_screeninfo picolcdfb_fix = { + .id = PICOLCDFB_NAME, + .type = FB_TYPE_PACKED_PIXELS, + .visual = FB_VISUAL_MONO01, + .xpanstep = 0, + .ypanstep = 0, + .ywrapstep = 0, + .line_length = PICOLCDFB_WIDTH / 8, + .accel = FB_ACCEL_NONE, +}; + +static const struct fb_var_screeninfo picolcdfb_var = { + .xres = PICOLCDFB_WIDTH, + .yres = PICOLCDFB_HEIGHT, + .xres_virtual = PICOLCDFB_WIDTH, + .yres_virtual = PICOLCDFB_HEIGHT, + .width = 103, + .height = 26, + .bits_per_pixel = 1, + .grayscale = 1, +}; +#endif /* CONFIG_FB */ + /* Input device * * The PicoLCD has an IR receiver header, a built-in keypad with 5 keys @@ -118,6 +174,16 @@ struct picolcd_data { struct input_dev *input_cir; unsigned short keycode[PICOLCD_KEYS]; +#if defined(CONFIG_FB) || defined(CONFIG_FB_MODULE) + /* Framebuffer stuff */ + u8 fb_update_rate; + u8 fb_bpp; + u8 *fb_vbitmap; /* local copy of what was sent to PicoLCD */ + u8 *fb_bitmap; /* framebuffer */ + struct fb_info *fb_info; + struct fb_deferred_io fb_defio; +#endif /* CONFIG_FB */ + /* Housekeeping stuff */ spinlock_t lock; struct mutex mutex; @@ -125,6 +191,7 @@ struct picolcd_data { int status; #define PICOLCD_BOOTLOADER 1 #define PICOLCD_FAILED 2 +#define PICOLCD_READY_FB 4 }; @@ -197,6 +264,486 @@ static struct picolcd_pending *picolcd_send_and_wait(struct hid_device *hdev, return work; } +#if defined(CONFIG_FB) || defined(CONFIG_FB_MODULE) +/* Send a given tile to PicoLCD */ +static int picolcd_fb_send_tile(struct hid_device *hdev, int chip, int tile) +{ + struct picolcd_data *data = hid_get_drvdata(hdev); + struct hid_report *report1 = picolcd_out_report(REPORT_LCD_CMD_DATA, hdev); + struct hid_report *report2 = picolcd_out_report(REPORT_LCD_DATA, hdev); + unsigned long flags; + u8 *tdata; + int i; + + if (!report1 || report1->maxfield != 1 || !report2 || report2->maxfield != 1) + return -ENODEV; + + spin_lock_irqsave(&data->lock, flags); + hid_set_field(report1->field[0], 0, chip << 2); + hid_set_field(report1->field[0], 1, 0x02); + hid_set_field(report1->field[0], 2, 0x00); + hid_set_field(report1->field[0], 3, 0x00); + hid_set_field(report1->field[0], 4, 0xb8 | tile); + hid_set_field(report1->field[0], 5, 0x00); + hid_set_field(report1->field[0], 6, 0x00); + hid_set_field(report1->field[0], 7, 0x40); + hid_set_field(report1->field[0], 8, 0x00); + hid_set_field(report1->field[0], 9, 0x00); + hid_set_field(report1->field[0], 10, 32); + + hid_set_field(report2->field[0], 0, (chip << 2) | 0x01); + hid_set_field(report2->field[0], 1, 0x00); + hid_set_field(report2->field[0], 2, 0x00); + hid_set_field(report2->field[0], 3, 32); + + tdata = data->fb_vbitmap + (tile * 4 + chip) * 64; + for (i = 0; i < 64; i++) + if (i < 32) + hid_set_field(report1->field[0], 11 + i, tdata[i]); + else + hid_set_field(report2->field[0], 4 + i - 32, tdata[i]); + + usbhid_submit_report(data->hdev, report1, USB_DIR_OUT); + usbhid_submit_report(data->hdev, report2, USB_DIR_OUT); + spin_unlock_irqrestore(&data->lock, flags); + return 0; +} + +/* Translate a single tile*/ +static int picolcd_fb_update_tile(u8 *vbitmap, const u8 *bitmap, int bpp, + int chip, int tile) +{ + int i, b, changed = 0; + u8 tdata[64]; + u8 *vdata = vbitmap + (tile * 4 + chip) * 64; + + if (bpp == 1) { + for (b = 7; b >= 0; b--) { + const u8 *bdata = bitmap + tile * 256 + chip * 8 + b * 32; + for (i = 0; i < 64; i++) { + tdata[i] <<= 1; + tdata[i] |= (bdata[i/8] >> (7 - i % 8)) & 0x01; + } + } + } else if (bpp == 8) { + for (b = 7; b >= 0; b--) { + const u8 *bdata = bitmap + (tile * 256 + chip * 8 + b * 32) * 8; + for (i = 0; i < 64; i++) { + tdata[i] <<= 1; + tdata[i] |= (bdata[i] & 0x80) ? 0x01 : 0x00; + } + } + } else { + /* Oops, we should never get here! */ + WARN_ON(1); + return 0; + } + + for (i = 0; i < 64; i++) + if (tdata[i] != vdata[i]) { + changed = 1; + vdata[i] = tdata[i]; + } + return changed; +} + +/* Reconfigure LCD display */ +static int picolcd_fb_reset(struct picolcd_data *data, int clear) +{ + struct hid_report *report = picolcd_out_report(REPORT_LCD_CMD, data->hdev); + int i, j; + unsigned long flags; + static const u8 mapcmd[8] = { 0x00, 0x02, 0x00, 0x64, 0x3f, 0x00, 0x64, 0xc0 }; + + if (!report || report->maxfield != 1) + return -ENODEV; + + spin_lock_irqsave(&data->lock, flags); + for (i = 0; i < 4; i++) { + for (j = 0; j < report->field[0]->maxusage; j++) + if (j == 0) + hid_set_field(report->field[0], j, i << 2); + else if (j < sizeof(mapcmd)) + hid_set_field(report->field[0], j, mapcmd[j]); + else + hid_set_field(report->field[0], j, 0); + usbhid_submit_report(data->hdev, report, USB_DIR_OUT); + } + + data->status |= PICOLCD_READY_FB; + spin_unlock_irqrestore(&data->lock, flags); + + if (data->fb_bitmap) { + if (clear) { + memset(data->fb_vbitmap, 0xff, PICOLCDFB_SIZE); + memset(data->fb_bitmap, 0, PICOLCDFB_SIZE*data->fb_bpp); + } else { + /* invert 1 byte in each tile to force resend */ + for (i = 0; i < PICOLCDFB_SIZE; i += 64) + data->fb_vbitmap[i] = ~data->fb_vbitmap[i]; + } + } + + /* schedule first output of framebuffer */ + if (data->fb_info) + schedule_delayed_work(&data->fb_info->deferred_work, 0); + + return 0; +} + +/* Update fb_vbitmap from the screen_base and send changed tiles to device */ +static void picolcd_fb_update(struct picolcd_data *data) +{ + int chip, tile, n; + unsigned long flags; + + spin_lock_irqsave(&data->lock, flags); + if (!(data->status & PICOLCD_READY_FB)) { + spin_unlock_irqrestore(&data->lock, flags); + picolcd_fb_reset(data, 0); + } else { + spin_unlock_irqrestore(&data->lock, flags); + } + + /* + * Translate the framebuffer into the format needed by the PicoLCD. + * See display layout above. + * Do this one tile after the other and push those tiles that changed. + * + * Wait for our IO to complete as otherwise we might flood the queue! + */ + n = 0; + for (chip = 0; chip < 4; chip++) + for (tile = 0; tile < 8; tile++) + if (picolcd_fb_update_tile(data->fb_vbitmap, + data->fb_bitmap, data->fb_bpp, chip, tile)) { + n += 2; + if (n >= HID_OUTPUT_FIFO_SIZE / 2) { + usbhid_wait_io(data->hdev); + n = 0; + } + picolcd_fb_send_tile(data->hdev, chip, tile); + } + if (n) + usbhid_wait_io(data->hdev); +} + +/* Stub to call the system default and update the image on the picoLCD */ +static void picolcd_fb_fillrect(struct fb_info *info, + const struct fb_fillrect *rect) +{ + if (!info->par) + return; + sys_fillrect(info, rect); + + schedule_delayed_work(&info->deferred_work, 0); +} + +/* Stub to call the system default and update the image on the picoLCD */ +static void picolcd_fb_copyarea(struct fb_info *info, + const struct fb_copyarea *area) +{ + if (!info->par) + return; + sys_copyarea(info, area); + + schedule_delayed_work(&info->deferred_work, 0); +} + +/* Stub to call the system default and update the image on the picoLCD */ +static void picolcd_fb_imageblit(struct fb_info *info, const struct fb_image *image) +{ + if (!info->par) + return; + sys_imageblit(info, image); + + schedule_delayed_work(&info->deferred_work, 0); +} + +/* + * this is the slow path from userspace. they can seek and write to + * the fb. it's inefficient to do anything less than a full screen draw + */ +static ssize_t picolcd_fb_write(struct fb_info *info, const char __user *buf, + size_t count, loff_t *ppos) +{ + ssize_t ret; + if (!info->par) + return -ENODEV; + ret = fb_sys_write(info, buf, count, ppos); + if (ret >= 0) + schedule_delayed_work(&info->deferred_work, 0); + return ret; +} + +static int picolcd_fb_blank(int blank, struct fb_info *info) +{ + if (!info->par) + return -ENODEV; + /* We let fb notification do this for us via lcd/backlight device */ + return 0; +} + +static void picolcd_fb_destroy(struct fb_info *info) +{ + struct picolcd_data *data = info->par; + info->par = NULL; + if (data) + data->fb_info = NULL; + fb_deferred_io_cleanup(info); + framebuffer_release(info); +} + +static int picolcd_fb_check_var(struct fb_var_screeninfo *var, struct fb_info *info) +{ + __u32 bpp = var->bits_per_pixel; + __u32 activate = var->activate; + + /* only allow 1/8 bit depth (8-bit is grayscale) */ + *var = picolcdfb_var; + var->activate = activate; + if (bpp >= 8) + var->bits_per_pixel = 8; + else + var->bits_per_pixel = 1; + return 0; +} + +static int picolcd_set_par(struct fb_info *info) +{ + struct picolcd_data *data = info->par; + u8 *o_fb, *n_fb; + if (info->var.bits_per_pixel == data->fb_bpp) + return 0; + /* switch between 1/8 bit depths */ + if (info->var.bits_per_pixel != 1 && info->var.bits_per_pixel != 8) + return -EINVAL; + + o_fb = data->fb_bitmap; + n_fb = vmalloc(PICOLCDFB_SIZE*info->var.bits_per_pixel); + if (!n_fb) + return -ENOMEM; + + fb_deferred_io_cleanup(info); + /* translate FB content to new bits-per-pixel */ + if (info->var.bits_per_pixel == 1) { + int i, b; + for (i = 0; i < PICOLCDFB_SIZE; i++) { + u8 p = 0; + for (b = 0; b < 8; b++) { + p <<= 1; + p |= o_fb[i*8+b] ? 0x01 : 0x00; + } + } + info->fix.visual = FB_VISUAL_MONO01; + info->fix.line_length = PICOLCDFB_WIDTH / 8; + } else { + int i; + for (i = 0; i < PICOLCDFB_SIZE * 8; i++) + n_fb[i] = o_fb[i/8] & (0x01 << (7 - i % 8)) ? 0xff : 0x00; + info->fix.visual = FB_VISUAL_TRUECOLOR; + info->fix.line_length = PICOLCDFB_WIDTH; + } + + data->fb_bitmap = n_fb; + data->fb_bpp = info->var.bits_per_pixel; + info->screen_base = (char __force __iomem *)n_fb; + info->fix.smem_start = (unsigned long)n_fb; + info->fix.smem_len = PICOLCDFB_SIZE*data->fb_bpp; + fb_deferred_io_init(info); + vfree(o_fb); + return 0; +} + +/* Note this can't be const because of struct fb_info definition */ +static struct fb_ops picolcdfb_ops = { + .owner = THIS_MODULE, + .fb_destroy = picolcd_fb_destroy, + .fb_read = fb_sys_read, + .fb_write = picolcd_fb_write, + .fb_blank = picolcd_fb_blank, + .fb_fillrect = picolcd_fb_fillrect, + .fb_copyarea = picolcd_fb_copyarea, + .fb_imageblit = picolcd_fb_imageblit, + .fb_check_var = picolcd_fb_check_var, + .fb_set_par = picolcd_set_par, +}; + + +/* Callback from deferred IO workqueue */ +static void picolcd_fb_deferred_io(struct fb_info *info, struct list_head *pagelist) +{ + picolcd_fb_update(info->par); +} + +static const struct fb_deferred_io picolcd_fb_defio = { + .delay = HZ / PICOLCDFB_UPDATE_RATE_DEFAULT, + .deferred_io = picolcd_fb_deferred_io, +}; + + +/* + * The "fb_update_rate" sysfs attribute + */ +static ssize_t picolcd_fb_update_rate_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct picolcd_data *data = dev_get_drvdata(dev); + unsigned i, fb_update_rate = data->fb_update_rate; + size_t ret = 0; + + for (i = 1; i <= PICOLCDFB_UPDATE_RATE_LIMIT; i++) + if (ret >= PAGE_SIZE) + break; + else if (i == fb_update_rate) + ret += snprintf(buf+ret, PAGE_SIZE-ret, "[%u] ", i); + else + ret += snprintf(buf+ret, PAGE_SIZE-ret, "%u ", i); + if (ret > 0) + buf[min(ret, (size_t)PAGE_SIZE)-1] = '\n'; + return ret; +} + +static ssize_t picolcd_fb_update_rate_store(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) +{ + struct picolcd_data *data = dev_get_drvdata(dev); + int i; + unsigned u; + + if (count < 1 || count > 10) + return -EINVAL; + + i = sscanf(buf, "%u", &u); + if (i != 1) + return -EINVAL; + + if (u > PICOLCDFB_UPDATE_RATE_LIMIT) + return -ERANGE; + else if (u == 0) + u = PICOLCDFB_UPDATE_RATE_DEFAULT; + + data->fb_update_rate = u; + data->fb_defio.delay = HZ / data->fb_update_rate; + return count; +} + +static DEVICE_ATTR(fb_update_rate, 0666, picolcd_fb_update_rate_show, + picolcd_fb_update_rate_store); + +/* initialize Framebuffer device */ +static int picolcd_init_framebuffer(struct picolcd_data *data) +{ + struct device *dev = &data->hdev->dev; + struct fb_info *info = NULL; + int error = -ENOMEM; + u8 *fb_vbitmap = NULL; + u8 *fb_bitmap = NULL; + + fb_bitmap = vmalloc(PICOLCDFB_SIZE*picolcdfb_var.bits_per_pixel); + if (fb_bitmap == NULL) { + dev_err(dev, "can't get a free page for framebuffer\n"); + goto err_nomem; + } + + fb_vbitmap = kmalloc(PICOLCDFB_SIZE, GFP_KERNEL); + if (fb_vbitmap == NULL) { + dev_err(dev, "can't alloc vbitmap image buffer\n"); + goto err_nomem; + } + + data->fb_update_rate = PICOLCDFB_UPDATE_RATE_DEFAULT; + data->fb_defio = picolcd_fb_defio; + info = framebuffer_alloc(0, dev); + if (info == NULL) { + dev_err(dev, "failed to allocate a framebuffer\n"); + goto err_nomem; + } + + info->fbdefio = &data->fb_defio; + info->screen_base = (char __force __iomem *)fb_bitmap; + info->fbops = &picolcdfb_ops; + info->var = picolcdfb_var; + info->fix = picolcdfb_fix; + info->fix.smem_len = PICOLCDFB_SIZE; + info->fix.smem_start = (unsigned long)fb_bitmap; + info->par = data; + info->flags = FBINFO_FLAG_DEFAULT; + + data->fb_vbitmap = fb_vbitmap; + data->fb_bitmap = fb_bitmap; + data->fb_bpp = picolcdfb_var.bits_per_pixel; + error = picolcd_fb_reset(data, 1); + if (error) { + dev_err(dev, "failed to configure display\n"); + goto err_cleanup; + } + error = device_create_file(dev, &dev_attr_fb_update_rate); + if (error) { + dev_err(dev, "failed to create sysfs attributes\n"); + goto err_cleanup; + } + data->fb_info = info; + error = register_framebuffer(info); + if (error) { + dev_err(dev, "failed to register framebuffer\n"); + goto err_sysfs; + } + fb_deferred_io_init(info); + /* schedule first output of framebuffer */ + schedule_delayed_work(&info->deferred_work, 0); + return 0; + +err_sysfs: + device_remove_file(dev, &dev_attr_fb_update_rate); +err_cleanup: + data->fb_vbitmap = NULL; + data->fb_bitmap = NULL; + data->fb_bpp = 0; + data->fb_info = NULL; + +err_nomem: + framebuffer_release(info); + vfree(fb_bitmap); + kfree(fb_vbitmap); + return error; +} + +static void picolcd_exit_framebuffer(struct picolcd_data *data) +{ + struct fb_info *info = data->fb_info; + u8 *fb_vbitmap = data->fb_vbitmap; + u8 *fb_bitmap = data->fb_bitmap; + + if (!info) + return; + + data->fb_vbitmap = NULL; + data->fb_bitmap = NULL; + data->fb_bpp = 0; + data->fb_info = NULL; + device_remove_file(&data->hdev->dev, &dev_attr_fb_update_rate); + fb_deferred_io_cleanup(info); + unregister_framebuffer(info); + vfree(fb_bitmap); + kfree(fb_vbitmap); +} + + +#else +static inline int picolcd_fb_reset(struct picolcd_data *data, int clear) +{ + return 0; +} +static inline int picolcd_init_framebuffer(struct picolcd_data *data) +{ + return 0; +} +static void picolcd_exit_framebuffer(struct picolcd_data *data) +{ +} +#endif /* CONFIG_FB */ + /* * input class device */ @@ -314,6 +861,7 @@ static int picolcd_reset(struct hid_device *hdev) struct picolcd_data *data = hid_get_drvdata(hdev); struct hid_report *report = picolcd_out_report(REPORT_RESET, hdev); unsigned long flags; + int error; if (!data || !report || report->maxfield != 1) return -ENODEV; @@ -327,7 +875,16 @@ static int picolcd_reset(struct hid_device *hdev) usbhid_submit_report(hdev, report, USB_DIR_OUT); spin_unlock_irqrestore(&data->lock, flags); - return picolcd_check_version(hdev); + error = picolcd_check_version(hdev); + if (error) + return error; + +#if defined(CONFIG_FB) || defined(CONFIG_FB_MODULE) + if (data->fb_info) + schedule_delayed_work(&data->fb_info->deferred_work, 0); +#endif /* CONFIG_FB */ + + return 0; } /* @@ -1005,6 +1562,11 @@ static int picolcd_probe_lcd(struct hid_device *hdev, struct picolcd_data *data) if (error) goto err; + /* Set up the framebuffer device */ + error = picolcd_init_framebuffer(data); + if (error) + goto err; + #ifdef CONFIG_DEBUG_FS report = picolcd_out_report(REPORT_READ_MEMORY, hdev); if (report && report->maxfield == 1 && report->field[0]->report_size == 8) @@ -1014,6 +1576,7 @@ static int picolcd_probe_lcd(struct hid_device *hdev, struct picolcd_data *data) #endif return 0; err: + picolcd_exit_framebuffer(data); picolcd_exit_cir(data); picolcd_exit_keys(data); return error; @@ -1143,6 +1706,8 @@ static void picolcd_remove(struct hid_device *hdev) complete(&data->pending->ready); spin_unlock_irqrestore(&data->lock, flags); + /* Clean up the framebuffer */ + picolcd_exit_framebuffer(data); /* Cleanup input */ picolcd_exit_cir(data); picolcd_exit_keys(data); diff --git a/drivers/hid/usbhid/hid-core.c b/drivers/hid/usbhid/hid-core.c index 56d06cd8075..3e7909b0f12 100644 --- a/drivers/hid/usbhid/hid-core.c +++ b/drivers/hid/usbhid/hid-core.c @@ -623,6 +623,7 @@ int usbhid_wait_io(struct hid_device *hid) return 0; } +EXPORT_SYMBOL_GPL(usbhid_wait_io); static int hid_set_idle(struct usb_device *dev, int ifnum, int report, int idle) { -- cgit v1.2.3-70-g09d2 From 3d61510f4ecacfe47c75c0eb51c0659dfa77fb1b Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Fri, 2 Apr 2010 13:21:58 -0400 Subject: HID: usbhid: enable remote wakeup for keyboards This patch (as1365) enables remote wakeup by default for USB keyboard devices. Keyboards in general are supposed to be wakeup devices, but the correct place to enable it depends on the device's bus; no single approach will work for all keyboard devices. In particular, this covers only USB keyboards (and then only those supporting the boot protocol). Signed-off-by: Alan Stern Signed-off-by: Jiri Kosina --- drivers/hid/usbhid/hid-core.c | 7 +++++-- drivers/hid/usbhid/usbkbd.c | 1 + 2 files changed, 6 insertions(+), 2 deletions(-) (limited to 'drivers/hid/usbhid') diff --git a/drivers/hid/usbhid/hid-core.c b/drivers/hid/usbhid/hid-core.c index 56d06cd8075..9cd61a52e9e 100644 --- a/drivers/hid/usbhid/hid-core.c +++ b/drivers/hid/usbhid/hid-core.c @@ -1026,12 +1026,15 @@ static int usbhid_start(struct hid_device *hid) /* Some keyboards don't work until their LEDs have been set. * Since BIOSes do set the LEDs, it must be safe for any device * that supports the keyboard boot protocol. + * In addition, enable remote wakeup by default for all keyboard + * devices supporting the boot protocol. */ if (interface->desc.bInterfaceSubClass == USB_INTERFACE_SUBCLASS_BOOT && interface->desc.bInterfaceProtocol == - USB_INTERFACE_PROTOCOL_KEYBOARD) + USB_INTERFACE_PROTOCOL_KEYBOARD) { usbhid_set_leds(hid); - + device_set_wakeup_enable(&dev->dev, 1); + } return 0; fail: diff --git a/drivers/hid/usbhid/usbkbd.c b/drivers/hid/usbhid/usbkbd.c index f843443ba5c..b2fd0b00de9 100644 --- a/drivers/hid/usbhid/usbkbd.c +++ b/drivers/hid/usbhid/usbkbd.c @@ -313,6 +313,7 @@ static int usb_kbd_probe(struct usb_interface *iface, goto fail2; usb_set_intfdata(iface, kbd); + device_set_wakeup_enable(&dev->dev, 1); return 0; fail2: -- cgit v1.2.3-70-g09d2 From b5e5a37e36cd4d355b875665312d7aaae4e5833c Mon Sep 17 00:00:00 2001 From: Bastien Nocera Date: Fri, 16 Apr 2010 17:19:50 +0100 Subject: HID: add HID_QUIRK_HIDDEV_FORCE and HID_QUIRK_NO_IGNORE Add two quirks to make it possible for usbhid module options to override whether a device is ignored (HID_QUIRK_NO_IGNORE) and whether to connect a hiddev device (HID_QUIRK_HIDDEV_FORCE). Passing HID_QUIRK_NO_IGNORE for your device means that it will not be ignored by the HID layer, even if present in a blacklist. HID_QUIRK_HIDDEV_FORCE will force the creation of a hiddev for that device, making it accessible from user-space. Tested with an Apple IR Receiver, switching it from using appleir to using lirc's macmini driver. Signed-off-by: Bastien Nocera Signed-off-by: Jiri Kosina --- drivers/hid/hid-core.c | 4 +++- drivers/hid/usbhid/hid-core.c | 1 + include/linux/hid.h | 2 ++ 3 files changed, 6 insertions(+), 1 deletion(-) (limited to 'drivers/hid/usbhid') diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c index 8617aa97a9c..468c6c2d4ad 100644 --- a/drivers/hid/hid-core.c +++ b/drivers/hid/hid-core.c @@ -1168,6 +1168,8 @@ int hid_connect(struct hid_device *hdev, unsigned int connect_mask) unsigned int i; int len; + if (hdev->quirks & HID_QUIRK_HIDDEV_FORCE) + connect_mask |= (HID_CONNECT_HIDDEV_FORCE | HID_CONNECT_HIDDEV); if (hdev->bus != BUS_USB) connect_mask &= ~HID_CONNECT_HIDDEV; if (hid_hiddev(hdev)) @@ -1757,7 +1759,7 @@ int hid_add_device(struct hid_device *hdev) /* we need to kill them here, otherwise they will stay allocated to * wait for coming driver */ - if (hid_ignore(hdev)) + if (!(hdev->quirks & HID_QUIRK_NO_IGNORE) && hid_ignore(hdev)) return -ENODEV; /* XXX hack, any other cleaner solution after the driver core diff --git a/drivers/hid/usbhid/hid-core.c b/drivers/hid/usbhid/hid-core.c index 9cd61a52e9e..245aef0de8f 100644 --- a/drivers/hid/usbhid/hid-core.c +++ b/drivers/hid/usbhid/hid-core.c @@ -1143,6 +1143,7 @@ static int usbhid_probe(struct usb_interface *intf, const struct usb_device_id * hid->vendor = le16_to_cpu(dev->descriptor.idVendor); hid->product = le16_to_cpu(dev->descriptor.idProduct); hid->name[0] = 0; + hid->quirks = usbhid_lookup_quirk(hid->vendor, hid->product); if (intf->cur_altsetting->desc.bInterfaceProtocol == USB_INTERFACE_PROTOCOL_MOUSE) hid->type = HID_TYPE_USBMOUSE; diff --git a/include/linux/hid.h b/include/linux/hid.h index b1344ec4b7f..f1f2b6f0d1c 100644 --- a/include/linux/hid.h +++ b/include/linux/hid.h @@ -308,11 +308,13 @@ struct hid_item { #define HID_QUIRK_NOTOUCH 0x00000002 #define HID_QUIRK_IGNORE 0x00000004 #define HID_QUIRK_NOGET 0x00000008 +#define HID_QUIRK_HIDDEV_FORCE 0x00000010 #define HID_QUIRK_BADPAD 0x00000020 #define HID_QUIRK_MULTI_INPUT 0x00000040 #define HID_QUIRK_SKIP_OUTPUT_REPORTS 0x00010000 #define HID_QUIRK_FULLSPEED_INTERVAL 0x10000000 #define HID_QUIRK_NO_INIT_REPORTS 0x20000000 +#define HID_QUIRK_NO_IGNORE 0x40000000 /* * This is the global environment of the parser. This information is -- cgit v1.2.3-70-g09d2 From 6a740aa4f47b9f29bad5292cf51f008f3edad9b1 Mon Sep 17 00:00:00 2001 From: Bruno Prémont Date: Sun, 25 Apr 2010 21:40:03 +0200 Subject: HID: add suspend/resume hooks for hid drivers MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Add suspend/resume hooks for HID drivers so these can do some additional state adjustment when device gets suspended/resumed. Signed-off-by: Bruno Prémont Signed-off-by: Jiri Kosina --- drivers/hid/usbhid/hid-core.c | 24 +++++++++++++++++++++++- include/linux/hid.h | 8 ++++++++ 2 files changed, 31 insertions(+), 1 deletion(-) (limited to 'drivers/hid/usbhid') diff --git a/drivers/hid/usbhid/hid-core.c b/drivers/hid/usbhid/hid-core.c index 56d06cd8075..14a67fba590 100644 --- a/drivers/hid/usbhid/hid-core.c +++ b/drivers/hid/usbhid/hid-core.c @@ -1290,6 +1290,11 @@ static int hid_suspend(struct usb_interface *intf, pm_message_t message) { set_bit(HID_REPORTED_IDLE, &usbhid->iofl); spin_unlock_irq(&usbhid->lock); + if (hid->driver && hid->driver->suspend) { + status = hid->driver->suspend(hid, message); + if (status < 0) + return status; + } } else { usbhid_mark_busy(usbhid); spin_unlock_irq(&usbhid->lock); @@ -1297,6 +1302,11 @@ static int hid_suspend(struct usb_interface *intf, pm_message_t message) } } else { + if (hid->driver && hid->driver->suspend) { + status = hid->driver->suspend(hid, message); + if (status < 0) + return status; + } spin_lock_irq(&usbhid->lock); set_bit(HID_REPORTED_IDLE, &usbhid->iofl); spin_unlock_irq(&usbhid->lock); @@ -1351,6 +1361,11 @@ static int hid_resume(struct usb_interface *intf) hid_io_error(hid); usbhid_restart_queues(usbhid); + if (status >= 0 && hid->driver && hid->driver->resume) { + int ret = hid->driver->resume(hid); + if (ret < 0) + status = ret; + } dev_dbg(&intf->dev, "resume status %d\n", status); return 0; } @@ -1359,9 +1374,16 @@ static int hid_reset_resume(struct usb_interface *intf) { struct hid_device *hid = usb_get_intfdata(intf); struct usbhid_device *usbhid = hid->driver_data; + int status; clear_bit(HID_REPORTED_IDLE, &usbhid->iofl); - return hid_post_reset(intf); + status = hid_post_reset(intf); + if (status >= 0 && hid->driver && hid->driver->reset_resume) { + int ret = hid->driver->reset_resume(hid); + if (ret < 0) + status = ret; + } + return status; } #endif /* CONFIG_PM */ diff --git a/include/linux/hid.h b/include/linux/hid.h index b1344ec4b7f..069e587ae8e 100644 --- a/include/linux/hid.h +++ b/include/linux/hid.h @@ -589,6 +589,9 @@ struct hid_usage_id { * @report_fixup: called before report descriptor parsing (NULL means nop) * @input_mapping: invoked on input registering before mapping an usage * @input_mapped: invoked on input registering after mapping an usage + * @suspend: invoked on suspend (NULL means nop) + * @resume: invoked on resume if device was not reset (NULL means nop) + * @reset_resume: invoked on resume if device was reset (NULL means nop) * * raw_event and event should return 0 on no action performed, 1 when no * further processing should be done and negative on error @@ -629,6 +632,11 @@ struct hid_driver { int (*input_mapped)(struct hid_device *hdev, struct hid_input *hidinput, struct hid_field *field, struct hid_usage *usage, unsigned long **bit, int *max); +#ifdef CONFIG_PM + int (*suspend)(struct hid_device *hdev, pm_message_t message); + int (*resume)(struct hid_device *hdev); + int (*reset_resume)(struct hid_device *hdev); +#endif /* private: */ struct device_driver driver; }; -- cgit v1.2.3-70-g09d2 From fe6065dc30c8cdd4beaffd6d3fa110222ad08795 Mon Sep 17 00:00:00 2001 From: Peter Hutterer Date: Tue, 2 Feb 2010 13:40:40 +1000 Subject: HID: add multi-input quirk for eGalax Touchcontroller I've got one of these devices on my desk and it seems that it suffers from the ABS_Z/ABS_RX issue that we've seen in other devices before. This patch uses the same reasoning as 9db630b48 ("HID: add multi-input quirk for NextWindow Touchscreen"). Signed-off-by: Peter Hutterer Signed-off-by: Jiri Kosina --- drivers/hid/hid-ids.h | 3 +++ drivers/hid/usbhid/hid-quirks.c | 1 + 2 files changed, 4 insertions(+) (limited to 'drivers/hid/usbhid') diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h index 9791d0a8d16..513e75e0f65 100644 --- a/drivers/hid/hid-ids.h +++ b/drivers/hid/hid-ids.h @@ -174,6 +174,9 @@ #define USB_VENDOR_ID_DRAGONRISE 0x0079 +#define USB_VENDOR_ID_EGALAX 0x0EEF +#define USB_DEVICE_ID_EGALAX_TOUCHCONTROLLER 0x0001 + #define USB_VENDOR_ID_ELO 0x04E7 #define USB_DEVICE_ID_ELO_TS2700 0x0020 diff --git a/drivers/hid/usbhid/hid-quirks.c b/drivers/hid/usbhid/hid-quirks.c index 7844280897d..8ea185246a7 100644 --- a/drivers/hid/usbhid/hid-quirks.c +++ b/drivers/hid/usbhid/hid-quirks.c @@ -32,6 +32,7 @@ static const struct hid_blacklist { { USB_VENDOR_ID_AASHIMA, USB_DEVICE_ID_AASHIMA_PREDATOR, HID_QUIRK_BADPAD }, { USB_VENDOR_ID_ALPS, USB_DEVICE_ID_IBM_GAMEPAD, HID_QUIRK_BADPAD }, { USB_VENDOR_ID_CHIC, USB_DEVICE_ID_CHIC_GAMEPAD, HID_QUIRK_BADPAD }, + { USB_VENDOR_ID_EGALAX, USB_DEVICE_ID_EGALAX_TOUCHCONTROLLER, HID_QUIRK_MULTI_INPUT }, { USB_VENDOR_ID_HAPP, USB_DEVICE_ID_UGCI_DRIVING, HID_QUIRK_BADPAD | HID_QUIRK_MULTI_INPUT }, { USB_VENDOR_ID_HAPP, USB_DEVICE_ID_UGCI_FLYING, HID_QUIRK_BADPAD | HID_QUIRK_MULTI_INPUT }, { USB_VENDOR_ID_HAPP, USB_DEVICE_ID_UGCI_FIGHTING, HID_QUIRK_BADPAD | HID_QUIRK_MULTI_INPUT }, -- cgit v1.2.3-70-g09d2 From a8ab5d58b0238b8199cc699b8dff7c5e1da24138 Mon Sep 17 00:00:00 2001 From: Alan Ott Date: Sun, 16 May 2010 18:07:09 -0400 Subject: HID: hidraw: Use Interrupt Endpoint for OUT Transfers if Available This patch makes the hidraw driver use the first Interrupt OUT endpoint for HID transfers to the device if such an endpoint exists. This is consistent with the behavior of the hiddev driver, and the logic is similar. From the USB HID specification: The Interrupt Out pipe is optional. If a device declares an Interrupt Out endpoint then Output reports are transmitted by the host to the device through the Interrupt Out endpoint. If no Interrupt Out endpoint is declared then Output reports are transmitted to a device through the Control endpoint, using Set_Report(Output) requests. Signed-off-by: Alan Ott Signed-off-by: Jiri Kosina --- drivers/hid/usbhid/hid-core.c | 40 ++++++++++++++++++++++++++++++---------- 1 file changed, 30 insertions(+), 10 deletions(-) (limited to 'drivers/hid/usbhid') diff --git a/drivers/hid/usbhid/hid-core.c b/drivers/hid/usbhid/hid-core.c index 245aef0de8f..f9640a362ca 100644 --- a/drivers/hid/usbhid/hid-core.c +++ b/drivers/hid/usbhid/hid-core.c @@ -807,16 +807,36 @@ static int usbhid_output_raw_report(struct hid_device *hid, __u8 *buf, size_t co struct usb_host_interface *interface = intf->cur_altsetting; int ret; - ret = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), - HID_REQ_SET_REPORT, - USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE, - ((report_type + 1) << 8) | *buf, - interface->desc.bInterfaceNumber, buf + 1, count - 1, - USB_CTRL_SET_TIMEOUT); - - /* count also the report id */ - if (ret > 0) - ret++; + if (usbhid->urbout) { + int actual_length; + int skipped_report_id = 0; + if (buf[0] == 0x0) { + /* Don't send the Report ID */ + buf++; + count--; + skipped_report_id = 1; + } + ret = usb_interrupt_msg(dev, usbhid->urbout->pipe, + buf, count, &actual_length, + USB_CTRL_SET_TIMEOUT); + /* return the number of bytes transferred */ + if (ret == 0) { + ret = actual_length; + /* count also the report id */ + if (skipped_report_id) + ret++; + } + } else { + ret = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), + HID_REQ_SET_REPORT, + USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE, + ((report_type + 1) << 8) | *buf, + interface->desc.bInterfaceNumber, buf + 1, count - 1, + USB_CTRL_SET_TIMEOUT); + /* count also the report id */ + if (ret > 0) + ret++; + } return ret; } -- cgit v1.2.3-70-g09d2