From 51c997d80e1f625aea3426a8a9087f5830ac6db3 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Tue, 12 Dec 2006 18:18:29 +0100 Subject: hwmon/f71805f: Add support for the Fintek F71872F/FG chip Add support for the Fintek F71872F/FG Super-I/O chip. It is basically the same as the Fintek F71805F/FG as far as hardware monitoring is concerned, with two additional internal voltages monitored (VSB and battery), and 6 VID inputs (not yet supported.) To make things a bit more confusing, two of the voltage input pins (in4 and in8) can be used for other functions. The driver reads the pin configuration from the Super-I/O configuration space to decide whether it must create interface files for these inputs or not. Many thanks to Nikolay Derkach for testing the early iterations of this code and reporting bugs. Signed-off-by: Jean Delvare --- drivers/hwmon/Kconfig | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'drivers/hwmon/Kconfig') diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig index e379ac41c09..5a0763197e2 100644 --- a/drivers/hwmon/Kconfig +++ b/drivers/hwmon/Kconfig @@ -142,11 +142,12 @@ config SENSORS_DS1621 will be called ds1621. config SENSORS_F71805F - tristate "Fintek F71805F/FG" + tristate "Fintek F71805F/FG and F71872F/FG" depends on HWMON && EXPERIMENTAL help If you say yes here you get support for hardware monitoring - features of the Fintek F71805F/FG chips. + features of the Fintek F71805F/FG and F71872F/FG Super-I/O + chips. This driver can also be built as a module. If so, the module will be called f71805f. -- cgit v1.2.3-70-g09d2