From 1061d8518f8bde548a03a5ff77dbe9a4202ad826 Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Sat, 25 Jun 2011 11:21:49 -0700 Subject: hwmon: (pmbus) Add support for VID output voltage mode In VID mode, output voltages are measured and reported as VID values, and have to be converted to voltages using VID conversion tables or functions. Support is added for VR11 only at this time. This patch enables support for PMBus devices supporting VID VR11 based output voltage selection such as NCP4200 and NCP4208. Signed-off-by: Guenter Roeck Reviewed-by: Robert Coulson --- drivers/hwmon/pmbus/adm1275.c | 6 ++-- drivers/hwmon/pmbus/max16064.c | 6 ++-- drivers/hwmon/pmbus/max34440.c | 18 ++++++------ drivers/hwmon/pmbus/max8688.c | 8 +++--- drivers/hwmon/pmbus/pmbus.c | 34 +++++++++++++++++++++-- drivers/hwmon/pmbus/pmbus.h | 7 +++-- drivers/hwmon/pmbus/pmbus_core.c | 60 ++++++++++++++++++++++++++++++++++------ 7 files changed, 105 insertions(+), 34 deletions(-) (limited to 'drivers/hwmon') diff --git a/drivers/hwmon/pmbus/adm1275.c b/drivers/hwmon/pmbus/adm1275.c index 8bc1bd66372..71770ffbdaf 100644 --- a/drivers/hwmon/pmbus/adm1275.c +++ b/drivers/hwmon/pmbus/adm1275.c @@ -50,9 +50,9 @@ static int adm1275_probe(struct i2c_client *client, } info->pages = 1; - info->direct[PSC_VOLTAGE_IN] = true; - info->direct[PSC_VOLTAGE_OUT] = true; - info->direct[PSC_CURRENT_OUT] = true; + info->format[PSC_VOLTAGE_IN] = direct; + info->format[PSC_VOLTAGE_OUT] = direct; + info->format[PSC_CURRENT_OUT] = direct; info->m[PSC_CURRENT_OUT] = 807; info->b[PSC_CURRENT_OUT] = 20475; info->R[PSC_CURRENT_OUT] = -1; diff --git a/drivers/hwmon/pmbus/max16064.c b/drivers/hwmon/pmbus/max16064.c index 1d6d717060d..78e20bca53a 100644 --- a/drivers/hwmon/pmbus/max16064.c +++ b/drivers/hwmon/pmbus/max16064.c @@ -27,9 +27,9 @@ static struct pmbus_driver_info max16064_info = { .pages = 4, - .direct[PSC_VOLTAGE_IN] = true, - .direct[PSC_VOLTAGE_OUT] = true, - .direct[PSC_TEMPERATURE] = true, + .format[PSC_VOLTAGE_IN] = direct, + .format[PSC_VOLTAGE_OUT] = direct, + .format[PSC_TEMPERATURE] = direct, .m[PSC_VOLTAGE_IN] = 19995, .b[PSC_VOLTAGE_IN] = 0, .R[PSC_VOLTAGE_IN] = -1, diff --git a/drivers/hwmon/pmbus/max34440.c b/drivers/hwmon/pmbus/max34440.c index db11e1a175b..2e30046a116 100644 --- a/drivers/hwmon/pmbus/max34440.c +++ b/drivers/hwmon/pmbus/max34440.c @@ -72,10 +72,10 @@ static int max34440_read_byte_data(struct i2c_client *client, int page, int reg) static struct pmbus_driver_info max34440_info[] = { [max34440] = { .pages = 14, - .direct[PSC_VOLTAGE_IN] = true, - .direct[PSC_VOLTAGE_OUT] = true, - .direct[PSC_TEMPERATURE] = true, - .direct[PSC_CURRENT_OUT] = true, + .format[PSC_VOLTAGE_IN] = direct, + .format[PSC_VOLTAGE_OUT] = direct, + .format[PSC_TEMPERATURE] = direct, + .format[PSC_CURRENT_OUT] = direct, .m[PSC_VOLTAGE_IN] = 1, .b[PSC_VOLTAGE_IN] = 0, .R[PSC_VOLTAGE_IN] = 3, /* R = 0 in datasheet reflects mV */ @@ -112,11 +112,11 @@ static struct pmbus_driver_info max34440_info[] = { }, [max34441] = { .pages = 12, - .direct[PSC_VOLTAGE_IN] = true, - .direct[PSC_VOLTAGE_OUT] = true, - .direct[PSC_TEMPERATURE] = true, - .direct[PSC_CURRENT_OUT] = true, - .direct[PSC_FAN] = true, + .format[PSC_VOLTAGE_IN] = direct, + .format[PSC_VOLTAGE_OUT] = direct, + .format[PSC_TEMPERATURE] = direct, + .format[PSC_CURRENT_OUT] = direct, + .format[PSC_FAN] = direct, .m[PSC_VOLTAGE_IN] = 1, .b[PSC_VOLTAGE_IN] = 0, .R[PSC_VOLTAGE_IN] = 3, diff --git a/drivers/hwmon/pmbus/max8688.c b/drivers/hwmon/pmbus/max8688.c index 7fb93f4e9f2..ddc8a64c2ba 100644 --- a/drivers/hwmon/pmbus/max8688.c +++ b/drivers/hwmon/pmbus/max8688.c @@ -91,10 +91,10 @@ static int max8688_read_byte_data(struct i2c_client *client, int page, int reg) static struct pmbus_driver_info max8688_info = { .pages = 1, - .direct[PSC_VOLTAGE_IN] = true, - .direct[PSC_VOLTAGE_OUT] = true, - .direct[PSC_TEMPERATURE] = true, - .direct[PSC_CURRENT_OUT] = true, + .format[PSC_VOLTAGE_IN] = direct, + .format[PSC_VOLTAGE_OUT] = direct, + .format[PSC_TEMPERATURE] = direct, + .format[PSC_CURRENT_OUT] = direct, .m[PSC_VOLTAGE_IN] = 19995, .b[PSC_VOLTAGE_IN] = 0, .R[PSC_VOLTAGE_IN] = -1, diff --git a/drivers/hwmon/pmbus/pmbus.c b/drivers/hwmon/pmbus/pmbus.c index 9b1f0c37ef7..4d8e31bcd7a 100644 --- a/drivers/hwmon/pmbus/pmbus.c +++ b/drivers/hwmon/pmbus/pmbus.c @@ -96,6 +96,8 @@ static void pmbus_find_sensor_groups(struct i2c_client *client, static int pmbus_identify(struct i2c_client *client, struct pmbus_driver_info *info) { + int ret = 0; + if (!info->pages) { /* * Check if the PAGE command is supported. If it is, @@ -117,6 +119,27 @@ static int pmbus_identify(struct i2c_client *client, } } + if (pmbus_check_byte_register(client, 0, PMBUS_VOUT_MODE)) { + int vout_mode; + + vout_mode = pmbus_read_byte_data(client, 0, PMBUS_VOUT_MODE); + if (vout_mode >= 0 && vout_mode != 0xff) { + switch (vout_mode >> 5) { + case 0: + break; + case 1: + info->format[PSC_VOLTAGE_OUT] = vid; + break; + case 2: + info->format[PSC_VOLTAGE_OUT] = direct; + break; + default: + ret = -ENODEV; + goto abort; + } + } + } + /* * We should check if the COEFFICIENTS register is supported. * If it is, and the chip is configured for direct mode, we can read @@ -125,13 +148,18 @@ static int pmbus_identify(struct i2c_client *client, * * To do this, we will need access to a chip which actually supports the * COEFFICIENTS command, since the command is too complex to implement - * without testing it. + * without testing it. Until then, abort if a chip configured for direct + * mode was detected. */ + if (info->format[PSC_VOLTAGE_OUT] == direct) { + ret = -ENODEV; + goto abort; + } /* Try to find sensor groups */ pmbus_find_sensor_groups(client, info); - - return 0; +abort: + return ret; } static int pmbus_probe(struct i2c_client *client, diff --git a/drivers/hwmon/pmbus/pmbus.h b/drivers/hwmon/pmbus/pmbus.h index 50647ab7235..cc5b6a23260 100644 --- a/drivers/hwmon/pmbus/pmbus.h +++ b/drivers/hwmon/pmbus/pmbus.h @@ -266,11 +266,11 @@ enum pmbus_sensor_classes { #define PMBUS_HAVE_STATUS_FAN12 (1 << 16) #define PMBUS_HAVE_STATUS_FAN34 (1 << 17) +enum pmbus_data_format { linear = 0, direct, vid }; + struct pmbus_driver_info { int pages; /* Total number of pages */ - bool direct[PSC_NUM_CLASSES]; - /* true if device uses direct data format - for the given sensor class */ + enum pmbus_data_format format[PSC_NUM_CLASSES]; /* * Support one set of coefficients for each sensor type * Used for chips providing data in direct mode. @@ -299,6 +299,7 @@ struct pmbus_driver_info { int pmbus_set_page(struct i2c_client *client, u8 page); int pmbus_read_word_data(struct i2c_client *client, u8 page, u8 reg); +int pmbus_read_byte_data(struct i2c_client *client, u8 page, u8 reg); void pmbus_clear_faults(struct i2c_client *client); bool pmbus_check_byte_register(struct i2c_client *client, int page, int reg); bool pmbus_check_word_register(struct i2c_client *client, int page, int reg); diff --git a/drivers/hwmon/pmbus/pmbus_core.c b/drivers/hwmon/pmbus/pmbus_core.c index 8e31a8e2c74..cef763c7da3 100644 --- a/drivers/hwmon/pmbus/pmbus_core.c +++ b/drivers/hwmon/pmbus/pmbus_core.c @@ -197,7 +197,7 @@ int pmbus_read_word_data(struct i2c_client *client, u8 page, u8 reg) } EXPORT_SYMBOL_GPL(pmbus_read_word_data); -static int pmbus_read_byte_data(struct i2c_client *client, u8 page, u8 reg) +int pmbus_read_byte_data(struct i2c_client *client, u8 page, u8 reg) { int rv; @@ -207,6 +207,7 @@ static int pmbus_read_byte_data(struct i2c_client *client, u8 page, u8 reg) return i2c_smbus_read_byte_data(client, reg); } +EXPORT_SYMBOL_GPL(pmbus_read_byte_data); static void pmbus_clear_fault_page(struct i2c_client *client, int page) { @@ -443,15 +444,37 @@ static long pmbus_reg2data_direct(struct pmbus_data *data, return (val - b) / m; } +/* + * Convert VID sensor values to milli- or micro-units + * depending on sensor type. + * We currently only support VR11. + */ +static long pmbus_reg2data_vid(struct pmbus_data *data, + struct pmbus_sensor *sensor) +{ + long val = sensor->data; + + if (val < 0x02 || val > 0xb2) + return 0; + return DIV_ROUND_CLOSEST(160000 - (val - 2) * 625, 100); +} + static long pmbus_reg2data(struct pmbus_data *data, struct pmbus_sensor *sensor) { long val; - if (data->info->direct[sensor->class]) + switch (data->info->format[sensor->class]) { + case direct: val = pmbus_reg2data_direct(data, sensor); - else + break; + case vid: + val = pmbus_reg2data_vid(data, sensor); + break; + case linear: + default: val = pmbus_reg2data_linear(data, sensor); - + break; + } return val; } @@ -561,16 +584,31 @@ static u16 pmbus_data2reg_direct(struct pmbus_data *data, return val; } +static u16 pmbus_data2reg_vid(struct pmbus_data *data, + enum pmbus_sensor_classes class, long val) +{ + val = SENSORS_LIMIT(val, 500, 1600); + + return 2 + DIV_ROUND_CLOSEST((1600 - val) * 100, 625); +} + static u16 pmbus_data2reg(struct pmbus_data *data, enum pmbus_sensor_classes class, long val) { u16 regval; - if (data->info->direct[class]) + switch (data->info->format[class]) { + case direct: regval = pmbus_data2reg_direct(data, class, val); - else + break; + case vid: + regval = pmbus_data2reg_vid(data, class, val); + break; + case linear: + default: regval = pmbus_data2reg_linear(data, class, val); - + break; + } return regval; } @@ -1380,7 +1418,7 @@ static int pmbus_identify_common(struct i2c_client *client, */ switch (vout_mode >> 5) { case 0: /* linear mode */ - if (data->info->direct[PSC_VOLTAGE_OUT]) + if (data->info->format[PSC_VOLTAGE_OUT] != linear) return -ENODEV; exponent = vout_mode & 0x1f; @@ -1389,8 +1427,12 @@ static int pmbus_identify_common(struct i2c_client *client, exponent |= ~0x1f; data->exponent = exponent; break; + case 1: /* VID mode */ + if (data->info->format[PSC_VOLTAGE_OUT] != vid) + return -ENODEV; + break; case 2: /* direct mode */ - if (!data->info->direct[PSC_VOLTAGE_OUT]) + if (data->info->format[PSC_VOLTAGE_OUT] != direct) return -ENODEV; break; default: -- cgit v1.2.3-70-g09d2