From ec693fe5287e1791f4d206e81ebdfdc7d1f8f6b9 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Wed, 25 May 2011 20:43:33 +0200 Subject: hwmon: (abituguru) Depend on DMI The abituguru drivers are only built on X86, where DMI support is now enabled by default. So let these drivers depend on DMI, for the following gains: * Robustness and safety. Detection of these devices is weak and uses non-standard methods, it should really be limited to Abit boards unless the user explicitly asks otherwise. * Code simplicity. The code is easier to read without ifdefs. * Better build testing coverage. Now there's only one way to build the drivers, so no risk of build failure on exotic systems. Signed-off-by: Jean Delvare Acked-by: Guenter Roeck Acked-by: Alistair John Strachan Acked-by: Hans de Goede --- drivers/hwmon/Kconfig | 4 ++-- drivers/hwmon/abituguru.c | 3 --- drivers/hwmon/abituguru3.c | 13 ------------- 3 files changed, 2 insertions(+), 18 deletions(-) (limited to 'drivers/hwmon') diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig index 12bfc073fc5..900409615ae 100644 --- a/drivers/hwmon/Kconfig +++ b/drivers/hwmon/Kconfig @@ -41,7 +41,7 @@ comment "Native drivers" config SENSORS_ABITUGURU tristate "Abit uGuru (rev 1 & 2)" - depends on X86 && EXPERIMENTAL + depends on X86 && DMI && EXPERIMENTAL help If you say yes here you get support for the sensor part of the first and second revision of the Abit uGuru chip. The voltage and frequency @@ -56,7 +56,7 @@ config SENSORS_ABITUGURU config SENSORS_ABITUGURU3 tristate "Abit uGuru (rev 3)" - depends on X86 && EXPERIMENTAL + depends on X86 && DMI && EXPERIMENTAL help If you say yes here you get support for the sensor part of the third revision of the Abit uGuru chip. Only reading the sensors diff --git a/drivers/hwmon/abituguru.c b/drivers/hwmon/abituguru.c index e7d4c4687f0..65a35cf5b3c 100644 --- a/drivers/hwmon/abituguru.c +++ b/drivers/hwmon/abituguru.c @@ -1448,15 +1448,12 @@ static int __init abituguru_init(void) { int address, err; struct resource res = { .flags = IORESOURCE_IO }; - -#ifdef CONFIG_DMI const char *board_vendor = dmi_get_system_info(DMI_BOARD_VENDOR); /* safety check, refuse to load on non Abit motherboards */ if (!force && (!board_vendor || strcmp(board_vendor, "http://www.abit.com.tw/"))) return -ENODEV; -#endif address = abituguru_detect(); if (address < 0) diff --git a/drivers/hwmon/abituguru3.c b/drivers/hwmon/abituguru3.c index e89d572e332..d30855a7578 100644 --- a/drivers/hwmon/abituguru3.c +++ b/drivers/hwmon/abituguru3.c @@ -1119,8 +1119,6 @@ static struct platform_driver abituguru3_driver = { .resume = abituguru3_resume }; -#ifdef CONFIG_DMI - static int __init abituguru3_dmi_detect(void) { const char *board_vendor, *board_name; @@ -1159,15 +1157,6 @@ static int __init abituguru3_dmi_detect(void) return 1; } -#else /* !CONFIG_DMI */ - -static inline int abituguru3_dmi_detect(void) -{ - return 1; -} - -#endif /* CONFIG_DMI */ - /* FIXME: Manual detection should die eventually; we need to collect stable * DMI model names first before we can rely entirely on CONFIG_DMI. */ @@ -1216,10 +1205,8 @@ static int __init abituguru3_init(void) if (err) return err; -#ifdef CONFIG_DMI pr_warn("this motherboard was not detected using DMI. " "Please send the output of \"dmidecode\" to the abituguru3 maintainer (see MAINTAINERS)\n"); -#endif } err = platform_driver_register(&abituguru3_driver); -- cgit v1.2.3-70-g09d2